Merge remote-tracking branch 'origin/released'

Conflicts:
	zlib/Makefile

8 files changed, 1691 insertions, 395 deletions

diff --git a/zlib/examples/README.examples b/zlib/examples/README.examples
index 5632d7a4c..56a31714e 100644
--- a/zlib/examples/README.examples
+++ b/zlib/examples/README.examples
@@ -1,4 +1,10 @@
-This directory contains examples of the use of zlib.
+This directory contains examples of the use of zlib and other relevant
+programs and documentation.
+
+enough.c
+    calculation and justification of ENOUGH parameter in inftrees.h
+    - calculates the maximum table space used in inflate tree
+      construction over all possible Huffman codes
 
 fitblk.c
     compress just enough input to nearly fill a requested output size
@@ -23,9 +29,10 @@ gzjoin.c
 
 gzlog.c
 gzlog.h
-    efficiently maintain a message log file in gzip format
-    - illustrates use of raw deflate and Z_SYNC_FLUSH
-    - illustrates use of gzip header extra field
+    efficiently and robustly maintain a message log file in gzip format
+    - illustrates use of raw deflate, Z_PARTIAL_FLUSH, deflatePrime(),
+      and deflateSetDictionary()
+    - illustrates use of a gzip header extra field
 
 zlib_how.html
     painfully comprehensive description of zpipe.c (see below)
diff --git a/zlib/examples/enough.c b/zlib/examples/enough.c
new file mode 100644
index 000000000..c40410bad
--- /dev/null
+++ b/zlib/examples/enough.c
@@ -0,0 +1,569 @@
+/* enough.c -- determine the maximum size of inflate's Huffman code tables over
+ * all possible valid and complete Huffman codes, subject to a length limit.
+ * Copyright (C) 2007, 2008 Mark Adler
+ * Version 1.3  17 February 2008  Mark Adler
+ */
+
+/* Version history:
+   1.0   3 Jan 2007  First version (derived from codecount.c version 1.4)
+   1.1   4 Jan 2007  Use faster incremental table usage computation
+                     Prune examine() search on previously visited states
+   1.2   5 Jan 2007  Comments clean up
+                     As inflate does, decrease root for short codes
+                     Refuse cases where inflate would increase root
+   1.3  17 Feb 2008  Add argument for initial root table size
+                     Fix bug for initial root table size == max - 1
+                     Use a macro to compute the history index
+ */
+
+/*
+   Examine all possible Huffman codes for a given number of symbols and a
+   maximum code length in bits to determine the maximum table size for zilb's
+   inflate.  Only complete Huffman codes are counted.
+
+   Two codes are considered distinct if the vectors of the number of codes per
+   length are not identical.  So permutations of the symbol assignments result
+   in the same code for the counting, as do permutations of the assignments of
+   the bit values to the codes (i.e. only canonical codes are counted).
+
+   We build a code from shorter to longer lengths, determining how many symbols
+   are coded at each length.  At each step, we have how many symbols remain to
+   be coded, what the last code length used was, and how many bit patterns of
+   that length remain unused. Then we add one to the code length and double the
+   number of unused patterns to graduate to the next code length.  We then
+   assign all portions of the remaining symbols to that code length that
+   preserve the properties of a correct and eventually complete code.  Those
+   properties are: we cannot use more bit patterns than are available; and when
+   all the symbols are used, there are exactly zero possible bit patterns
+   remaining.
+
+   The inflate Huffman decoding algorithm uses two-level lookup tables for
+   speed.  There is a single first-level table to decode codes up to root bits
+   in length (root == 9 in the current inflate implementation).  The table
+   has 1 << root entries and is indexed by the next root bits of input.  Codes
+   shorter than root bits have replicated table entries, so that the correct
+   entry is pointed to regardless of the bits that follow the short code.  If
+   the code is longer than root bits, then the table entry points to a second-
+   level table.  The size of that table is determined by the longest code with
+   that root-bit prefix.  If that longest code has length len, then the table
+   has size 1 << (len - root), to index the remaining bits in that set of
+   codes.  Each subsequent root-bit prefix then has its own sub-table.  The
+   total number of table entries required by the code is calculated
+   incrementally as the number of codes at each bit length is populated.  When
+   all of the codes are shorter than root bits, then root is reduced to the
+   longest code length, resulting in a single, smaller, one-level table.
+
+   The inflate algorithm also provides for small values of root (relative to
+   the log2 of the number of symbols), where the shortest code has more bits
+   than root.  In that case, root is increased to the length of the shortest
+   code.  This program, by design, does not handle that case, so it is verified
+   that the number of symbols is less than 2^(root + 1).
+
+   In order to speed up the examination (by about ten orders of magnitude for
+   the default arguments), the intermediate states in the build-up of a code
+   are remembered and previously visited branches are pruned.  The memory
+   required for this will increase rapidly with the total number of symbols and
+   the maximum code length in bits.  However this is a very small price to pay
+   for the vast speedup.
+
+   First, all of the possible Huffman codes are counted, and reachable
+   intermediate states are noted by a non-zero count in a saved-results array.
+   Second, the intermediate states that lead to (root + 1) bit or longer codes
+   are used to look at all sub-codes from those junctures for their inflate
+   memory usage.  (The amount of memory used is not affected by the number of
+   codes of root bits or less in length.)  Third, the visited states in the
+   construction of those sub-codes and the associated calculation of the table
+   size is recalled in order to avoid recalculating from the same juncture.
+   Beginning the code examination at (root + 1) bit codes, which is enabled by
+   identifying the reachable nodes, accounts for about six of the orders of
+   magnitude of improvement for the default arguments.  About another four
+   orders of magnitude come from not revisiting previous states.  Out of
+   approximately 2x10^16 possible Huffman codes, only about 2x10^6 sub-codes
+   need to be examined to cover all of the possible table memory usage cases
+   for the default arguments of 286 symbols limited to 15-bit codes.
+
+   Note that an unsigned long long type is used for counting.  It is quite easy
+   to exceed the capacity of an eight-byte integer with a large number of
+   symbols and a large maximum code length, so multiple-precision arithmetic
+   would need to replace the unsigned long long arithmetic in that case.  This
+   program will abort if an overflow occurs.  The big_t type identifies where
+   the counting takes place.
+
+   An unsigned long long type is also used for calculating the number of
+   possible codes remaining at the maximum length.  This limits the maximum
+   code length to the number of bits in a long long minus the number of bits
+   needed to represent the symbols in a flat code.  The code_t type identifies
+   where the bit pattern counting takes place.
+ */
+
+#include <stdio.h>
+#include <stdlib.h>
+#include <string.h>
+#include <assert.h>
+
+#define local static
+
+/* special data types */
+typedef unsigned long long big_t;   /* type for code counting */
+typedef unsigned long long code_t;  /* type for bit pattern counting */
+struct tab {                        /* type for been here check */
+    size_t len;         /* length of bit vector in char's */
+    char *vec;          /* allocated bit vector */
+};
+
+/* The array for saving results, num[], is indexed with this triplet:
+
+      syms: number of symbols remaining to code
+      left: number of available bit patterns at length len
+      len: number of bits in the codes currently being assigned
+
+   Those indices are constrained thusly when saving results:
+
+      syms: 3..totsym (totsym == total symbols to code)
+      left: 2..syms - 1, but only the evens (so syms == 8 -> 2, 4, 6)
+      len: 1..max - 1 (max == maximum code length in bits)
+
+   syms == 2 is not saved since that immediately leads to a single code.  left
+   must be even, since it represents the number of available bit patterns at
+   the current length, which is double the number at the previous length.
+   left ends at syms-1 since left == syms immediately results in a single code.
+   (left > sym is not allowed since that would result in an incomplete code.)
+   len is less than max, since the code completes immediately when len == max.
+
+   The offset into the array is calculated for the three indices with the
+   first one (syms) being outermost, and the last one (len) being innermost.
+   We build the array with length max-1 lists for the len index, with syms-3
+   of those for each symbol.  There are totsym-2 of those, with each one
+   varying in length as a function of sym.  See the calculation of index in
+   count() for the index, and the calculation of size in main() for the size
+   of the array.
+
+   For the deflate example of 286 symbols limited to 15-bit codes, the array
+   has 284,284 entries, taking up 2.17 MB for an 8-byte big_t.  More than
+   half of the space allocated for saved results is actually used -- not all
+   possible triplets are reached in the generation of valid Huffman codes.
+ */
+
+/* The array for tracking visited states, done[], is itself indexed identically
+   to the num[] array as described above for the (syms, left, len) triplet.
+   Each element in the array is further indexed by the (mem, rem) doublet,
+   where mem is the amount of inflate table space used so far, and rem is the
+   remaining unused entries in the current inflate sub-table.  Each indexed
+   element is simply one bit indicating whether the state has been visited or
+   not.  Since the ranges for mem and rem are not known a priori, each bit
+   vector is of a variable size, and grows as needed to accommodate the visited
+   states.  mem and rem are used to calculate a single index in a triangular
+   array.  Since the range of mem is expected in the default case to be about
+   ten times larger than the range of rem, the array is skewed to reduce the
+   memory usage, with eight times the range for mem than for rem.  See the
+   calculations for offset and bit in beenhere() for the details.
+
+   For the deflate example of 286 symbols limited to 15-bit codes, the bit
+   vectors grow to total approximately 21 MB, in addition to the 4.3 MB done[]
+   array itself.
+ */
+
+/* Globals to avoid propagating constants or constant pointers recursively */
+local int max;          /* maximum allowed bit length for the codes */
+local int root;         /* size of base code table in bits */
+local int large;        /* largest code table so far */
+local size_t size;      /* number of elements in num and done */
+local int *code;        /* number of symbols assigned to each bit length */
+local big_t *num;       /* saved results array for code counting */
+local struct tab *done; /* states already evaluated array */
+
+/* Index function for num[] and done[] */
+#define INDEX(i,j,k) (((size_t)((i-1)>>1)*((i-2)>>1)+(j>>1)-1)*(max-1)+k-1)
+
+/* Free allocated space.  Uses globals code, num, and done. */
+local void cleanup(void)
+{
+    size_t n;
+
+    if (done != NULL) {
+        for (n = 0; n < size; n++)
+            if (done[n].len)
+                free(done[n].vec);
+        free(done);
+    }
+    if (num != NULL)
+        free(num);
+    if (code != NULL)
+        free(code);
+}
+
+/* Return the number of possible Huffman codes using bit patterns of lengths
+   len through max inclusive, coding syms symbols, with left bit patterns of
+   length len unused -- return -1 if there is an overflow in the counting.
+   Keep a record of previous results in num to prevent repeating the same
+   calculation.  Uses the globals max and num. */
+local big_t count(int syms, int len, int left)
+{
+    big_t sum;          /* number of possible codes from this juncture */
+    big_t got;          /* value returned from count() */
+    int least;          /* least number of syms to use at this juncture */
+    int most;           /* most number of syms to use at this juncture */
+    int use;            /* number of bit patterns to use in next call */
+    size_t index;       /* index of this case in *num */
+
+    /* see if only one possible code */
+    if (syms == left)
+        return 1;
+
+    /* note and verify the expected state */
+    assert(syms > left && left > 0 && len < max);
+
+    /* see if we've done this one already */
+    index = INDEX(syms, left, len);
+    got = num[index];
+    if (got)
+        return got;         /* we have -- return the saved result */
+
+    /* we need to use at least this many bit patterns so that the code won't be
+       incomplete at the next length (more bit patterns than symbols) */
+    least = (left << 1) - syms;
+    if (least < 0)
+        least = 0;
+
+    /* we can use at most this many bit patterns, lest there not be enough
+       available for the remaining symbols at the maximum length (if there were
+       no limit to the code length, this would become: most = left - 1) */
+    most = (((code_t)left << (max - len)) - syms) /
+            (((code_t)1 << (max - len)) - 1);
+
+    /* count all possible codes from this juncture and add them up */
+    sum = 0;
+    for (use = least; use <= most; use++) {
+        got = count(syms - use, len + 1, (left - use) << 1);
+        sum += got;
+        if (got == -1 || sum < got)         /* overflow */
+            return -1;
+    }
+
+    /* verify that all recursive calls are productive */
+    assert(sum != 0);
+
+    /* save the result and return it */
+    num[index] = sum;
+    return sum;
+}
+
+/* Return true if we've been here before, set to true if not.  Set a bit in a
+   bit vector to indicate visiting this state.  Each (syms,len,left) state
+   has a variable size bit vector indexed by (mem,rem).  The bit vector is
+   lengthened if needed to allow setting the (mem,rem) bit. */
+local int beenhere(int syms, int len, int left, int mem, int rem)
+{
+    size_t index;       /* index for this state's bit vector */
+    size_t offset;      /* offset in this state's bit vector */
+    int bit;            /* mask for this state's bit */
+    size_t length;      /* length of the bit vector in bytes */
+    char *vector;       /* new or enlarged bit vector */
+
+    /* point to vector for (syms,left,len), bit in vector for (mem,rem) */
+    index = INDEX(syms, left, len);
+    mem -= 1 << root;
+    offset = (mem >> 3) + rem;
+    offset = ((offset * (offset + 1)) >> 1) + rem;
+    bit = 1 << (mem & 7);
+
+    /* see if we've been here */
+    length = done[index].len;
+    if (offset < length && (done[index].vec[offset] & bit) != 0)
+        return 1;       /* done this! */
+
+    /* we haven't been here before -- set the bit to show we have now */
+
+    /* see if we need to lengthen the vector in order to set the bit */
+    if (length <= offset) {
+        /* if we have one already, enlarge it, zero out the appended space */
+        if (length) {
+            do {
+                length <<= 1;
+            } while (length <= offset);
+            vector = realloc(done[index].vec, length);
+            if (vector != NULL)
+                memset(vector + done[index].len, 0, length - done[index].len);
+        }
+
+        /* otherwise we need to make a new vector and zero it out */
+        else {
+            length = 1 << (len - root);
+            while (length <= offset)
+                length <<= 1;
+            vector = calloc(length, sizeof(char));
+        }
+
+        /* in either case, bail if we can't get the memory */
+        if (vector == NULL) {
+            fputs("abort: unable to allocate enough memory\n", stderr);
+            cleanup();
+            exit(1);
+        }
+
+        /* install the new vector */
+        done[index].len = length;
+        done[index].vec = vector;
+    }
+
+    /* set the bit */
+    done[index].vec[offset] |= bit;
+    return 0;
+}
+
+/* Examine all possible codes from the given node (syms, len, left).  Compute
+   the amount of memory required to build inflate's decoding tables, where the
+   number of code structures used so far is mem, and the number remaining in
+   the current sub-table is rem.  Uses the globals max, code, root, large, and
+   done. */
+local void examine(int syms, int len, int left, int mem, int rem)
+{
+    int least;          /* least number of syms to use at this juncture */
+    int most;           /* most number of syms to use at this juncture */
+    int use;            /* number of bit patterns to use in next call */
+
+    /* see if we have a complete code */
+    if (syms == left) {
+        /* set the last code entry */
+        code[len] = left;
+
+        /* complete computation of memory used by this code */
+        while (rem < left) {
+            left -= rem;
+            rem = 1 << (len - root);
+            mem += rem;
+        }
+        assert(rem == left);
+
+        /* if this is a new maximum, show the entries used and the sub-code */
+        if (mem > large) {
+            large = mem;
+            printf("max %d: ", mem);
+            for (use = root + 1; use <= max; use++)
+                if (code[use])
+                    printf("%d[%d] ", code[use], use);
+            putchar('\n');
+            fflush(stdout);
+        }
+
+        /* remove entries as we drop back down in the recursion */
+        code[len] = 0;
+        return;
+    }
+
+    /* prune the tree if we can */
+    if (beenhere(syms, len, left, mem, rem))
+        return;
+
+    /* we need to use at least this many bit patterns so that the code won't be
+       incomplete at the next length (more bit patterns than symbols) */
+    least = (left << 1) - syms;
+    if (least < 0)
+        least = 0;
+
+    /* we can use at most this many bit patterns, lest there not be enough
+       available for the remaining symbols at the maximum length (if there were
+       no limit to the code length, this would become: most = left - 1) */
+    most = (((code_t)left << (max - len)) - syms) /
+            (((code_t)1 << (max - len)) - 1);
+
+    /* occupy least table spaces, creating new sub-tables as needed */
+    use = least;
+    while (rem < use) {
+        use -= rem;
+        rem = 1 << (len - root);
+        mem += rem;
+    }
+    rem -= use;
+
+    /* examine codes from here, updating table space as we go */
+    for (use = least; use <= most; use++) {
+        code[len] = use;
+        examine(syms - use, len + 1, (left - use) << 1,
+                mem + (rem ? 1 << (len - root) : 0), rem << 1);
+        if (rem == 0) {
+            rem = 1 << (len - root);
+            mem += rem;
+        }
+        rem--;
+    }
+
+    /* remove entries as we drop back down in the recursion */
+    code[len] = 0;
+}
+
+/* Look at all sub-codes starting with root + 1 bits.  Look at only the valid
+   intermediate code states (syms, left, len).  For each completed code,
+   calculate the amount of memory required by inflate to build the decoding
+   tables. Find the maximum amount of memory required and show the code that
+   requires that maximum.  Uses the globals max, root, and num. */
+local void enough(int syms)
+{
+    int n;              /* number of remaing symbols for this node */
+    int left;           /* number of unused bit patterns at this length */
+    size_t index;       /* index of this case in *num */
+
+    /* clear code */
+    for (n = 0; n <= max; n++)
+        code[n] = 0;
+
+    /* look at all (root + 1) bit and longer codes */
+    large = 1 << root;              /* base table */
+    if (root < max)                 /* otherwise, there's only a base table */
+        for (n = 3; n <= syms; n++)
+            for (left = 2; left < n; left += 2)
+            {
+                /* look at all reachable (root + 1) bit nodes, and the
+                   resulting codes (complete at root + 2 or more) */
+                index = INDEX(n, left, root + 1);
+                if (root + 1 < max && num[index])       /* reachable node */
+                    examine(n, root + 1, left, 1 << root, 0);
+
+                /* also look at root bit codes with completions at root + 1
+                   bits (not saved in num, since complete), just in case */
+                if (num[index - 1] && n <= left << 1)
+                    examine((n - left) << 1, root + 1, (n - left) << 1,
+                            1 << root, 0);
+            }
+
+    /* done */
+    printf("done: maximum of %d table entries\n", large);
+}
+
+/*
+   Examine and show the total number of possible Huffman codes for a given
+   maximum number of symbols, initial root table size, and maximum code length
+   in bits -- those are the command arguments in that order.  The default
+   values are 286, 9, and 15 respectively, for the deflate literal/length code.
+   The possible codes are counted for each number of coded symbols from two to
+   the maximum.  The counts for each of those and the total number of codes are
+   shown.  The maximum number of inflate table entires is then calculated
+   across all possible codes.  Each new maximum number of table entries and the
+   associated sub-code (starting at root + 1 == 10 bits) is shown.
+
+   To count and examine Huffman codes that are not length-limited, provide a
+   maximum length equal to the number of symbols minus one.
+
+   For the deflate literal/length code, use "enough".  For the deflate distance
+   code, use "enough 30 6".
+
+   This uses the %llu printf format to print big_t numbers, which assumes that
+   big_t is an unsigned long long.  If the big_t type is changed (for example
+   to a multiple precision type), the method of printing will also need to be
+   updated.
+ */
+int main(int argc, char **argv)
+{
+    int syms;           /* total number of symbols to code */
+    int n;              /* number of symbols to code for this run */
+    big_t got;          /* return value of count() */
+    big_t sum;          /* accumulated number of codes over n */
+
+    /* set up globals for cleanup() */
+    code = NULL;
+    num = NULL;
+    done = NULL;
+
+    /* get arguments -- default to the deflate literal/length code */
+    syms = 286;
+        root = 9;
+    max = 15;
+    if (argc > 1) {
+        syms = atoi(argv[1]);
+        if (argc > 2) {
+            root = atoi(argv[2]);
+                        if (argc > 3)
+                                max = atoi(argv[3]);
+                }
+    }
+    if (argc > 4 || syms < 2 || root < 1 || max < 1) {
+        fputs("invalid arguments, need: [sym >= 2 [root >= 1 [max >= 1]]]\n",
+                          stderr);
+        return 1;
+    }
+
+    /* if not restricting the code length, the longest is syms - 1 */
+    if (max > syms - 1)
+        max = syms - 1;
+
+    /* determine the number of bits in a code_t */
+    n = 0;
+    while (((code_t)1 << n) != 0)
+        n++;
+
+    /* make sure that the calculation of most will not overflow */
+    if (max > n || syms - 2 >= (((code_t)0 - 1) >> (max - 1))) {
+        fputs("abort: code length too long for internal types\n", stderr);
+        return 1;
+    }
+
+    /* reject impossible code requests */
+    if (syms - 1 > ((code_t)1 << max) - 1) {
+        fprintf(stderr, "%d symbols cannot be coded in %d bits\n",
+                syms, max);
+        return 1;
+    }
+
+    /* allocate code vector */
+    code = calloc(max + 1, sizeof(int));
+    if (code == NULL) {
+        fputs("abort: unable to allocate enough memory\n", stderr);
+        return 1;
+    }
+
+    /* determine size of saved results array, checking for overflows,
+       allocate and clear the array (set all to zero with calloc()) */
+    if (syms == 2)              /* iff max == 1 */
+        num = NULL;             /* won't be saving any results */
+    else {
+        size = syms >> 1;
+        if (size > ((size_t)0 - 1) / (n = (syms - 1) >> 1) ||
+                (size *= n, size > ((size_t)0 - 1) / (n = max - 1)) ||
+                (size *= n, size > ((size_t)0 - 1) / sizeof(big_t)) ||
+                (num = calloc(size, sizeof(big_t))) == NULL) {
+            fputs("abort: unable to allocate enough memory\n", stderr);
+            cleanup();
+            return 1;
+        }
+    }
+
+    /* count possible codes for all numbers of symbols, add up counts */
+    sum = 0;
+    for (n = 2; n <= syms; n++) {
+        got = count(n, 1, 2);
+        sum += got;
+        if (got == -1 || sum < got) {       /* overflow */
+            fputs("abort: can't count that high!\n", stderr);
+            cleanup();
+            return 1;
+        }
+        printf("%llu %d-codes\n", got, n);
+    }
+    printf("%llu total codes for 2 to %d symbols", sum, syms);
+    if (max < syms - 1)
+        printf(" (%d-bit length limit)\n", max);
+    else
+        puts(" (no length limit)");
+
+    /* allocate and clear done array for beenhere() */
+    if (syms == 2)
+        done = NULL;
+    else if (size > ((size_t)0 - 1) / sizeof(struct tab) ||
+             (done = calloc(size, sizeof(struct tab))) == NULL) {
+        fputs("abort: unable to allocate enough memory\n", stderr);
+        cleanup();
+        return 1;
+    }
+
+    /* find and show maximum inflate table usage */
+        if (root > max)                 /* reduce root to max length */
+                root = max;
+    if (syms < ((code_t)1 << (root + 1)))
+        enough(syms);
+    else
+        puts("cannot handle minimum code lengths > root");
+
+    /* done */
+    cleanup();
+    return 0;
+}
diff --git a/zlib/examples/gun.c b/zlib/examples/gun.c
index bfec590a0..72b0882ab 100644
--- a/zlib/examples/gun.c
+++ b/zlib/examples/gun.c
@@ -1,7 +1,7 @@
 /* gun.c -- simple gunzip to give an example of the use of inflateBack()
- * Copyright (C) 2003, 2005 Mark Adler
+ * Copyright (C) 2003, 2005, 2008, 2010 Mark Adler
  * For conditions of distribution and use, see copyright notice in zlib.h
-   Version 1.3  12 June 2005  Mark Adler */
+   Version 1.6  17 January 2010  Mark Adler */
 
 /* Version history:
    1.0  16 Feb 2003  First version for testing of inflateBack()
@@ -15,6 +15,9 @@
    1.2  20 Mar 2005  Add Unix compress (LZW) decompression
                      Copy file attributes from input file to output file
    1.3  12 Jun 2005  Add casts for error messages [Oberhumer]
+   1.4   8 Dec 2006  LZW decompression speed improvements
+   1.5   9 Feb 2008  Avoid warning in latest version of gcc
+   1.6  17 Jan 2010  Avoid signed/unsigned comparison warnings
  */
 
 /*
@@ -197,14 +200,14 @@ local int lunpipe(unsigned have, unsigned char *next, struct ind *indp,
                   int outfile, z_stream *strm)
 {
     int last;                   /* last byte read by NEXT(), or -1 if EOF */
-    int chunk;                  /* bytes left in current chunk */
+    unsigned chunk;             /* bytes left in current chunk */
     int left;                   /* bits left in rem */
     unsigned rem;               /* unused bits from input */
     int bits;                   /* current bits per code */
     unsigned code;              /* code, table traversal index */
     unsigned mask;              /* mask for current bits codes */
     int max;                    /* maximum bits per code for this stream */
-    int flags;                  /* compress flags, then block compress flag */
+    unsigned flags;             /* compress flags, then block compress flag */
     unsigned end;               /* last valid entry in prefix/suffix tables */
     unsigned temp;              /* current code */
     unsigned prev;              /* previous code */
@@ -212,6 +215,7 @@ local int lunpipe(unsigned have, unsigned char *next, struct ind *indp,
     unsigned stack;             /* next position for reversed string */
     unsigned outcnt;            /* bytes in output buffer */
     struct outd outd;           /* output structure */
+    unsigned char *p;
 
     /* set up output */
     outd.outfile = outfile;
@@ -322,10 +326,12 @@ local int lunpipe(unsigned have, unsigned char *next, struct ind *indp,
         }
 
         /* walk through linked list to generate output in reverse order */
+        p = match + stack;
         while (code >= 256) {
-            match[stack++] = suffix[code];
+            *p++ = suffix[code];
             code = prefix[code];
         }
+        stack = p - match;
         match[stack++] = (unsigned char)code;
         final = code;
 
@@ -349,9 +355,11 @@ local int lunpipe(unsigned have, unsigned char *next, struct ind *indp,
             }
             outcnt = 0;
         }
+        p = match + stack;
         do {
-            outbuf[outcnt++] = match[--stack];
-        } while (stack);
+            outbuf[outcnt++] = *--p;
+        } while (p > match);
+        stack = 0;
 
         /* loop for next code with final and prev as the last match, rem and
            left provide the first 0..7 bits of the next code, end is the last
@@ -375,7 +383,7 @@ local int gunpipe(z_stream *strm, int infile, int outfile)
 {
     int ret, first, last;
     unsigned have, flags, len;
-    unsigned char *next;
+    unsigned char *next = NULL;
     struct ind ind, *indp;
     struct outd outd;
 
@@ -471,10 +479,10 @@ local int gunpipe(z_stream *strm, int infile, int outfile)
 
         /* check trailer */
         ret = Z_BUF_ERROR;
-        if (NEXT() != (outd.crc & 0xff) ||
-            NEXT() != ((outd.crc >> 8) & 0xff) ||
-            NEXT() != ((outd.crc >> 16) & 0xff) ||
-            NEXT() != ((outd.crc >> 24) & 0xff)) {
+        if (NEXT() != (int)(outd.crc & 0xff) ||
+            NEXT() != (int)((outd.crc >> 8) & 0xff) ||
+            NEXT() != (int)((outd.crc >> 16) & 0xff) ||
+            NEXT() != (int)((outd.crc >> 24) & 0xff)) {
             /* crc error */
             if (last != -1) {
                 strm->msg = (char *)"incorrect data check";
@@ -482,10 +490,10 @@ local int gunpipe(z_stream *strm, int infile, int outfile)
             }
             break;
         }
-        if (NEXT() != (outd.total & 0xff) ||
-            NEXT() != ((outd.total >> 8) & 0xff) ||
-            NEXT() != ((outd.total >> 16) & 0xff) ||
-            NEXT() != ((outd.total >> 24) & 0xff)) {
+        if (NEXT() != (int)(outd.total & 0xff) ||
+            NEXT() != (int)((outd.total >> 8) & 0xff) ||
+            NEXT() != (int)((outd.total >> 16) & 0xff) ||
+            NEXT() != (int)((outd.total >> 24) & 0xff)) {
             /* length error */
             if (last != -1) {
                 strm->msg = (char *)"incorrect length check";
@@ -642,8 +650,8 @@ int main(int argc, char **argv)
     argv++;
     test = 0;
     if (argc && strcmp(*argv, "-h") == 0) {
-        fprintf(stderr, "gun 1.3 (12 Jun 2005)\n");
-        fprintf(stderr, "Copyright (c) 2005 Mark Adler\n");
+        fprintf(stderr, "gun 1.6 (17 Jan 2010)\n");
+        fprintf(stderr, "Copyright (C) 2003-2010 Mark Adler\n");
         fprintf(stderr, "usage: gun [-t] [file1.gz [file2.Z ...]]\n");
         return 0;
     }
diff --git a/zlib/examples/gzlog.c b/zlib/examples/gzlog.c
index f71f817c8..d70aacaba 100644
--- a/zlib/examples/gzlog.c
+++ b/zlib/examples/gzlog.c
@@ -1,413 +1,1058 @@
 /*
  * gzlog.c
- * Copyright (C) 2004 Mark Adler
+ * Copyright (C) 2004, 2008 Mark Adler, all rights reserved
  * For conditions of distribution and use, see copyright notice in gzlog.h
- * version 1.0, 26 Nov 2004
- *
+ * version 2.0, 25 Apr 2008
  */
 
-#include <string.h>             /* memcmp() */
-#include <stdlib.h>             /* malloc(), free(), NULL */
-#include <sys/types.h>          /* size_t, off_t */
-#include <unistd.h>             /* read(), close(), sleep(), ftruncate(), */
-                                /* lseek() */
-#include <fcntl.h>              /* open() */
-#include <sys/file.h>           /* flock() */
-#include "zlib.h"               /* deflateInit2(), deflate(), deflateEnd() */
+/*
+   gzlog provides a mechanism for frequently appending short strings to a gzip
+   file that is efficient both in execution time and compression ratio.  The
+   strategy is to write the short strings in an uncompressed form to the end of
+   the gzip file, only compressing when the amount of uncompressed data has
+   reached a given threshold.
+
+   gzlog also provides protection against interruptions in the process due to
+   system crashes.  The status of the operation is recorded in an extra field
+   in the gzip file, and is only updated once the gzip file is brought to a
+   valid state.  The last data to be appended or compressed is saved in an
+   auxiliary file, so that if the operation is interrupted, it can be completed
+   the next time an append operation is attempted.
+
+   gzlog maintains another auxiliary file with the last 32K of data from the
+   compressed portion, which is preloaded for the compression of the subsequent
+   data.  This minimizes the impact to the compression ratio of appending.
+ */
+
+/*
+   Operations Concept:
+
+   Files (log name "foo"):
+   foo.gz -- gzip file with the complete log
+   foo.add -- last message to append or last data to compress
+   foo.dict -- dictionary of the last 32K of data for next compression
+   foo.temp -- temporary dictionary file for compression after this one
+   foo.lock -- lock file for reading and writing the other files
+   foo.repairs -- log file for log file recovery operations (not compressed)
+
+   gzip file structure:
+   - fixed-length (no file name) header with extra field (see below)
+   - compressed data ending initially with empty stored block
+   - uncompressed data filling out originally empty stored block and
+     subsequent stored blocks as needed (16K max each)
+   - gzip trailer
+   - no junk at end (no other gzip streams)
+
+   When appending data, the information in the first three items above plus the
+   foo.add file are sufficient to recover an interrupted append operation.  The
+   extra field has the necessary information to restore the start of the last
+   stored block and determine where to append the data in the foo.add file, as
+   well as the crc and length of the gzip data before the append operation.
+
+   The foo.add file is created before the gzip file is marked for append, and
+   deleted after the gzip file is marked as complete.  So if the append
+   operation is interrupted, the data to add will still be there.  If due to
+   some external force, the foo.add file gets deleted between when the append
+   operation was interrupted and when recovery is attempted, the gzip file will
+   still be restored, but without the appended data.
+
+   When compressing data, the information in the first two items above plus the
+   foo.add file are sufficient to recover an interrupted compress operation.
+   The extra field has the necessary information to find the end of the
+   compressed data, and contains both the crc and length of just the compressed
+   data and of the complete set of data including the contents of the foo.add
+   file.
+
+   Again, the foo.add file is maintained during the compress operation in case
+   of an interruption.  If in the unlikely event the foo.add file with the data
+   to be compressed is missing due to some external force, a gzip file with
+   just the previous compressed data will be reconstructed.  In this case, all
+   of the data that was to be compressed is lost (approximately one megabyte).
+   This will not occur if all that happened was an interruption of the compress
+   operation.
+
+   The third state that is marked is the replacement of the old dictionary with
+   the new dictionary after a compress operation.  Once compression is
+   complete, the gzip file is marked as being in the replace state.  This
+   completes the gzip file, so an interrupt after being so marked does not
+   result in recompression.  Then the dictionary file is replaced, and the gzip
+   file is marked as completed.  This state prevents the possibility of
+   restarting compression with the wrong dictionary file.
+
+   All three operations are wrapped by a lock/unlock procedure.  In order to
+   gain exclusive access to the log files, first a foo.lock file must be
+   exclusively created.  When all operations are complete, the lock is
+   released by deleting the foo.lock file.  If when attempting to create the
+   lock file, it already exists and the modify time of the lock file is more
+   than five minutes old (set by the PATIENCE define below), then the old
+   lock file is considered stale and deleted, and the exclusive creation of
+   the lock file is retried.  To assure that there are no false assessments
+   of the staleness of the lock file, the operations periodically touch the
+   lock file to update the modified date.
+
+   Following is the definition of the extra field with all of the information
+   required to enable the above append and compress operations and their
+   recovery if interrupted.  Multi-byte values are stored little endian
+   (consistent with the gzip format).  File pointers are eight bytes long.
+   The crc's and lengths for the gzip trailer are four bytes long.  (Note that
+   the length at the end of a gzip file is used for error checking only, and
+   for large files is actually the length modulo 2^32.)  The stored block
+   length is two bytes long.  The gzip extra field two-byte identification is
+   "ap" for append.  It is assumed that writing the extra field to the file is
+   an "atomic" operation.  That is, either all of the extra field is written
+   to the file, or none of it is, if the operation is interrupted right at the
+   point of updating the extra field.  This is a reasonable assumption, since
+   the extra field is within the first 52 bytes of the file, which is smaller
+   than any expected block size for a mass storage device (usually 512 bytes or
+   larger).
+
+   Extra field (35 bytes):
+   - Pointer to first stored block length -- this points to the two-byte length
+     of the first stored block, which is followed by the two-byte, one's
+     complement of that length.  The stored block length is preceded by the
+     three-bit header of the stored block, which is the actual start of the
+     stored block in the deflate format.  See the bit offset field below.
+   - Pointer to the last stored block length.  This is the same as above, but
+     for the last stored block of the uncompressed data in the gzip file.
+     Initially this is the same as the first stored block length pointer.
+     When the stored block gets to 16K (see the MAX_STORE define), then a new
+     stored block as added, at which point the last stored block length pointer
+     is different from the first stored block length pointer.  When they are
+     different, the first bit of the last stored block header is eight bits, or
+     one byte back from the block length.
+   - Compressed data crc and length.  This is the crc and length of the data
+     that is in the compressed portion of the deflate stream.  These are used
+     only in the event that the foo.add file containing the data to compress is
+     lost after a compress operation is interrupted.
+   - Total data crc and length.  This is the crc and length of all of the data
+     stored in the gzip file, compressed and uncompressed.  It is used to
+     reconstruct the gzip trailer when compressing, as well as when recovering
+     interrupted operations.
+   - Final stored block length.  This is used to quickly find where to append,
+     and allows the restoration of the original final stored block state when
+     an append operation is interrupted.
+   - First stored block start as the number of bits back from the final stored
+     block first length byte.  This value is in the range of 3..10, and is
+     stored as the low three bits of the final byte of the extra field after
+     subtracting three (0..7).  This allows the last-block bit of the stored
+     block header to be updated when a new stored block is added, for the case
+     when the first stored block and the last stored block are the same.  (When
+     they are different, the numbers of bits back is known to be eight.)  This
+     also allows for new compressed data to be appended to the old compressed
+     data in the compress operation, overwriting the previous first stored
+     block, or for the compressed data to be terminated and a valid gzip file
+     reconstructed on the off chance that a compression operation was
+     interrupted and the data to compress in the foo.add file was deleted.
+   - The operation in process.  This is the next two bits in the last byte (the
+     bits under the mask 0x18).  The are interpreted as 0: nothing in process,
+     1: append in process, 2: compress in process, 3: replace in process.
+   - The top three bits of the last byte in the extra field are reserved and
+     are currently set to zero.
+
+   Main procedure:
+   - Exclusively create the foo.lock file using the O_CREAT and O_EXCL modes of
+     the system open() call.  If the modify time of an existing lock file is
+     more than PATIENCE seconds old, then the lock file is deleted and the
+     exclusive create is retried.
+   - Load the extra field from the foo.gz file, and see if an operation was in
+     progress but not completed.  If so, apply the recovery procedure below.
+   - Perform the append procedure with the provided data.
+   - If the uncompressed data in the foo.gz file is 1MB or more, apply the
+     compress procedure.
+   - Delete the foo.lock file.
+
+   Append procedure:
+   - Put what to append in the foo.add file so that the operation can be
+     restarted if this procedure is interrupted.
+   - Mark the foo.gz extra field with the append operation in progress.
+   + Restore the original last-block bit and stored block length of the last
+     stored block from the information in the extra field, in case a previous
+     append operation was interrupted.
+   - Append the provided data to the last stored block, creating new stored
+     blocks as needed and updating the stored blocks last-block bits and
+     lengths.
+   - Update the crc and length with the new data, and write the gzip trailer.
+   - Write over the extra field (with a single write operation) with the new
+     pointers, lengths, and crc's, and mark the gzip file as not in process.
+     Though there is still a foo.add file, it will be ignored since nothing
+     is in process.  If a foo.add file is leftover from a previously
+     completed operation, it is truncated when writing new data to it.
+   - Delete the foo.add file.
+
+   Compress and replace procedures:
+   - Read all of the uncompressed data in the stored blocks in foo.gz and write
+     it to foo.add.  Also write foo.temp with the last 32K of that data to
+     provide a dictionary for the next invocation of this procedure.
+   - Rewrite the extra field marking foo.gz with a compression in process.
+   * If there is no data provided to compress (due to a missing foo.add file
+     when recovering), reconstruct and truncate the foo.gz file to contain
+     only the previous compressed data and proceed to the step after the next
+     one.  Otherwise ...
+   - Compress the data with the dictionary in foo.dict, and write to the
+     foo.gz file starting at the bit immediately following the last previously
+     compressed block.  If there is no foo.dict, proceed anyway with the
+     compression at slightly reduced efficiency.  (For the foo.dict file to be
+     missing requires some external failure beyond simply the interruption of
+     a compress operation.)  During this process, the foo.lock file is
+     periodically touched to assure that that file is not considered stale by
+     another process before we're done.  The deflation is terminated with a
+     non-last empty static block (10 bits long), that is then located and
+     written over by a last-bit-set empty stored block.
+   - Append the crc and length of the data in the gzip file (previously
+     calculated during the append operations).
+   - Write over the extra field with the updated stored block offsets, bits
+     back, crc's, and lengths, and mark foo.gz as in process for a replacement
+     of the dictionary.
+   @ Delete the foo.add file.
+   - Replace foo.dict with foo.temp.
+   - Write over the extra field, marking foo.gz as complete.
+
+   Recovery procedure:
+   - If not a replace recovery, read in the foo.add file, and provide that data
+     to the appropriate recovery below.  If there is no foo.add file, provide
+     a zero data length to the recovery.  In that case, the append recovery
+     restores the foo.gz to the previous compressed + uncompressed data state.
+     For the the compress recovery, a missing foo.add file results in foo.gz
+     being restored to the previous compressed-only data state.
+   - Append recovery:
+     - Pick up append at + step above
+   - Compress recovery:
+     - Pick up compress at * step above
+   - Replace recovery:
+     - Pick up compress at @ step above
+   - Log the repair with a date stamp in foo.repairs
+ */
+
+#include <sys/types.h>
+#include <stdio.h>      /* rename, fopen, fprintf, fclose */
+#include <stdlib.h>     /* malloc, free */
+#include <string.h>     /* strlen, strrchr, strcpy, strncpy, strcmp */
+#include <fcntl.h>      /* open */
+#include <unistd.h>     /* lseek, read, write, close, unlink, sleep, */
+                        /* ftruncate, fsync */
+#include <errno.h>      /* errno */
+#include <time.h>       /* time, ctime */
+#include <sys/stat.h>   /* stat */
+#include <sys/time.h>   /* utimes */
+#include "zlib.h"       /* crc32 */
+
+#include "gzlog.h"      /* header for external access */
 
-#include "gzlog.h"              /* interface */
 #define local static
+typedef unsigned int uint;
+typedef unsigned long ulong;
+
+/* Macro for debugging to deterministically force recovery operations */
+#ifdef DEBUG
+    #include <setjmp.h>         /* longjmp */
+    jmp_buf gzlog_jump;         /* where to go back to */
+    int gzlog_bail = 0;         /* which point to bail at (1..8) */
+    int gzlog_count = -1;       /* number of times through to wait */
+#   define BAIL(n) do { if (n == gzlog_bail && gzlog_count-- == 0) \
+                            longjmp(gzlog_jump, gzlog_bail); } while (0)
+#else
+#   define BAIL(n)
+#endif
+
+/* how old the lock file can be in seconds before considering it stale */
+#define PATIENCE 300
+
+/* maximum stored block size in Kbytes -- must be in 1..63 */
+#define MAX_STORE 16
 
-/* log object structure */
-typedef struct {
-    int id;                 /* object identifier */
-    int fd;                 /* log file descriptor */
-    off_t extra;            /* offset of extra "ap" subfield */
-    off_t mark_off;         /* offset of marked data */
-    off_t last_off;         /* offset of last block */
-    unsigned long crc;      /* uncompressed crc */
-    unsigned long len;      /* uncompressed length (modulo 2^32) */
-    unsigned stored;        /* length of current stored block */
-} gz_log;
-
-#define GZLOGID 19334       /* gz_log object identifier */
-
-#define LOCK_RETRY 1            /* retry lock once a second */
-#define LOCK_PATIENCE 1200      /* try about twenty minutes before forcing */
-
-/* acquire a lock on a file */
-local int lock(int fd)
+/* number of stored Kbytes to trigger compression (must be >= 32 to allow
+   dictionary construction, and <= 204 * MAX_STORE, in order for >> 10 to
+   discard the stored block headers contribution of five bytes each) */
+#define TRIGGER 1024
+
+/* size of a deflate dictionary (this cannot be changed) */
+#define DICT 32768U
+
+/* values for the operation (2 bits) */
+#define NO_OP 0
+#define APPEND_OP 1
+#define COMPRESS_OP 2
+#define REPLACE_OP 3
+
+/* macros to extract little-endian integers from an unsigned byte buffer */
+#define PULL2(p) ((p)[0]+((uint)((p)[1])<<8))
+#define PULL4(p) (PULL2(p)+((ulong)PULL2(p+2)<<16))
+#define PULL8(p) (PULL4(p)+((off_t)PULL4(p+4)<<32))
+
+/* macros to store integers into a byte buffer in little-endian order */
+#define PUT2(p,a) do {(p)[0]=a;(p)[1]=(a)>>8;} while(0)
+#define PUT4(p,a) do {PUT2(p,a);PUT2(p+2,a>>16);} while(0)
+#define PUT8(p,a) do {PUT4(p,a);PUT4(p+4,a>>32);} while(0)
+
+/* internal structure for log information */
+#define LOGID "\106\035\172"    /* should be three non-zero characters */
+struct log {
+    char id[4];     /* contains LOGID to detect inadvertent overwrites */
+    int fd;         /* file descriptor for .gz file, opened read/write */
+    char *path;     /* allocated path, e.g. "/var/log/foo" or "foo" */
+    char *end;      /* end of path, for appending suffices such as ".gz" */
+    off_t first;    /* offset of first stored block first length byte */
+    int back;       /* location of first block id in bits back from first */
+    uint stored;    /* bytes currently in last stored block */
+    off_t last;     /* offset of last stored block first length byte */
+    ulong ccrc;     /* crc of compressed data */
+    ulong clen;     /* length (modulo 2^32) of compressed data */
+    ulong tcrc;     /* crc of total data */
+    ulong tlen;     /* length (modulo 2^32) of total data */
+    time_t lock;    /* last modify time of our lock file */
+};
+
+/* gzip header for gzlog */
+local unsigned char log_gzhead[] = {
+    0x1f, 0x8b,                 /* magic gzip id */
+    8,                          /* compression method is deflate */
+    4,                          /* there is an extra field (no file name) */
+    0, 0, 0, 0,                 /* no modification time provided */
+    0, 0xff,                    /* no extra flags, no OS specified */
+    39, 0, 'a', 'p', 35, 0      /* extra field with "ap" subfield */
+                                /* 35 is EXTRA, 39 is EXTRA + 4 */
+};
+
+#define HEAD sizeof(log_gzhead)     /* should be 16 */
+
+/* initial gzip extra field content (52 == HEAD + EXTRA + 1) */
+local unsigned char log_gzext[] = {
+    52, 0, 0, 0, 0, 0, 0, 0,    /* offset of first stored block length */
+    52, 0, 0, 0, 0, 0, 0, 0,    /* offset of last stored block length */
+    0, 0, 0, 0, 0, 0, 0, 0,     /* compressed data crc and length */
+    0, 0, 0, 0, 0, 0, 0, 0,     /* total data crc and length */
+    0, 0,                       /* final stored block data length */
+    5                           /* op is NO_OP, last bit 8 bits back */
+};
+
+#define EXTRA sizeof(log_gzext)     /* should be 35 */
+
+/* initial gzip data and trailer */
+local unsigned char log_gzbody[] = {
+    1, 0, 0, 0xff, 0xff,        /* empty stored block (last) */
+    0, 0, 0, 0,                 /* crc */
+    0, 0, 0, 0                  /* uncompressed length */
+};
+
+#define BODY sizeof(log_gzbody)
+
+/* Exclusively create foo.lock in order to negotiate exclusive access to the
+   foo.* files.  If the modify time of an existing lock file is greater than
+   PATIENCE seconds in the past, then consider the lock file to have been
+   abandoned, delete it, and try the exclusive create again.  Save the lock
+   file modify time for verification of ownership.  Return 0 on success, or -1
+   on failure, usually due to an access restriction or invalid path.  Note that
+   if stat() or unlink() fails, it may be due to another process noticing the
+   abandoned lock file a smidge sooner and deleting it, so those are not
+   flagged as an error. */
+local int log_lock(struct log *log)
 {
-    int patience;
+    int fd;
+    struct stat st;
 
-    /* try to lock every LOCK_RETRY seconds for LOCK_PATIENCE seconds */
-    patience = LOCK_PATIENCE;
-    do {
-        if (flock(fd, LOCK_EX + LOCK_NB) == 0)
-            return 0;
-        (void)sleep(LOCK_RETRY);
-        patience -= LOCK_RETRY;
-    } while (patience > 0);
+    strcpy(log->end, ".lock");
+    while ((fd = open(log->path, O_CREAT | O_EXCL, 0644)) < 0) {
+        if (errno != EEXIST)
+            return -1;
+        if (stat(log->path, &st) == 0 && time(NULL) - st.st_mtime > PATIENCE) {
+            unlink(log->path);
+            continue;
+        }
+        sleep(2);       /* relinquish the CPU for two seconds while waiting */
+    }
+    close(fd);
+    if (stat(log->path, &st) == 0)
+        log->lock = st.st_mtime;
+    return 0;
+}
 
-    /* we've run out of patience -- give up */
-    return -1;
+/* Update the modify time of the lock file to now, in order to prevent another
+   task from thinking that the lock is stale.  Save the lock file modify time
+   for verification of ownership. */
+local void log_touch(struct log *log)
+{
+    struct stat st;
+
+    strcpy(log->end, ".lock");
+    utimes(log->path, NULL);
+    if (stat(log->path, &st) == 0)
+        log->lock = st.st_mtime;
 }
 
-/* release lock */
-local void unlock(int fd)
+/* Check the log file modify time against what is expected.  Return true if
+   this is not our lock.  If it is our lock, touch it to keep it. */
+local int log_check(struct log *log)
 {
-    (void)flock(fd, LOCK_UN);
+    struct stat st;
+
+    strcpy(log->end, ".lock");
+    if (stat(log->path, &st) || st.st_mtime != log->lock)
+        return 1;
+    log_touch(log);
+    return 0;
 }
 
-/* release a log object */
-local void log_clean(gz_log *log)
+/* Unlock a previously acquired lock, but only if it's ours. */
+local void log_unlock(struct log *log)
 {
-    unlock(log->fd);
-    (void)close(log->fd);
-    free(log);
+    if (log_check(log))
+        return;
+    strcpy(log->end, ".lock");
+    unlink(log->path);
+    log->lock = 0;
 }
 
-/* read an unsigned long from a byte buffer little-endian */
-local unsigned long make_ulg(unsigned char *buf)
+/* Check the gzip header and read in the extra field, filling in the values in
+   the log structure.  Return op on success or -1 if the gzip header was not as
+   expected.  op is the current operation in progress last written to the extra
+   field.  This assumes that the gzip file has already been opened, with the
+   file descriptor log->fd. */
+local int log_head(struct log *log)
 {
-    int n;
-    unsigned long val;
+    int op;
+    unsigned char buf[HEAD + EXTRA];
 
-    val = (unsigned long)(*buf++);
-    for (n = 8; n < 32; n += 8)
-        val += (unsigned long)(*buf++) << n;
-    return val;
+    if (lseek(log->fd, 0, SEEK_SET) < 0 ||
+        read(log->fd, buf, HEAD + EXTRA) != HEAD + EXTRA ||
+        memcmp(buf, log_gzhead, HEAD)) {
+        return -1;
+    }
+    log->first = PULL8(buf + HEAD);
+    log->last = PULL8(buf + HEAD + 8);
+    log->ccrc = PULL4(buf + HEAD + 16);
+    log->clen = PULL4(buf + HEAD + 20);
+    log->tcrc = PULL4(buf + HEAD + 24);
+    log->tlen = PULL4(buf + HEAD + 28);
+    log->stored = PULL2(buf + HEAD + 32);
+    log->back = 3 + (buf[HEAD + 34] & 7);
+    op = (buf[HEAD + 34] >> 3) & 3;
+    return op;
 }
 
-/* read an off_t from a byte buffer little-endian */
-local off_t make_off(unsigned char *buf)
+/* Write over the extra field contents, marking the operation as op.  Use fsync
+   to assure that the device is written to, and in the requested order.  This
+   operation, and only this operation, is assumed to be atomic in order to
+   assure that the log is recoverable in the event of an interruption at any
+   point in the process.  Return -1 if the write to foo.gz failed. */
+local int log_mark(struct log *log, int op)
 {
-    int n;
-    off_t val;
+    int ret;
+    unsigned char ext[EXTRA];
 
-    val = (off_t)(*buf++);
-    for (n = 8; n < 64; n += 8)
-        val += (off_t)(*buf++) << n;
-    return val;
+    PUT8(ext, log->first);
+    PUT8(ext + 8, log->last);
+    PUT4(ext + 16, log->ccrc);
+    PUT4(ext + 20, log->clen);
+    PUT4(ext + 24, log->tcrc);
+    PUT4(ext + 28, log->tlen);
+    PUT2(ext + 32, log->stored);
+    ext[34] = log->back - 3 + (op << 3);
+    fsync(log->fd);
+    ret = lseek(log->fd, HEAD, SEEK_SET) < 0 ||
+          write(log->fd, ext, EXTRA) != EXTRA ? -1 : 0;
+    fsync(log->fd);
+    return ret;
 }
 
-/* write an unsigned long little-endian to byte buffer */
-local void dice_ulg(unsigned long val, unsigned char *buf)
+/* Rewrite the last block header bits and subsequent zero bits to get to a byte
+   boundary, setting the last block bit if last is true, and then write the
+   remainder of the stored block header (length and one's complement).  Leave
+   the file pointer after the end of the last stored block data.  Return -1 if
+   there is a read or write failure on the foo.gz file */
+local int log_last(struct log *log, int last)
 {
-    int n;
+    int back, len, mask;
+    unsigned char buf[6];
+
+    /* determine the locations of the bytes and bits to modify */
+    back = log->last == log->first ? log->back : 8;
+    len = back > 8 ? 2 : 1;                 /* bytes back from log->last */
+    mask = 0x80 >> ((back - 1) & 7);        /* mask for block last-bit */
+
+    /* get the byte to modify (one or two back) into buf[0] -- don't need to
+       read the byte if the last-bit is eight bits back, since in that case
+       the entire byte will be modified */
+    buf[0] = 0;
+    if (back != 8 && (lseek(log->fd, log->last - len, SEEK_SET) < 0 ||
+                      read(log->fd, buf, 1) != 1))
+        return -1;
+
+    /* change the last-bit of the last stored block as requested -- note
+       that all bits above the last-bit are set to zero, per the type bits
+       of a stored block being 00 and per the convention that the bits to
+       bring the stream to a byte boundary are also zeros */
+    buf[1] = 0;
+    buf[2 - len] = (*buf & (mask - 1)) + (last ? mask : 0);
 
-    for (n = 0; n < 4; n++) {
-        *buf++ = val & 0xff;
-        val >>= 8;
+    /* write the modified stored block header and lengths, move the file
+       pointer to after the last stored block data */
+    PUT2(buf + 2, log->stored);
+    PUT2(buf + 4, log->stored ^ 0xffff);
+    return lseek(log->fd, log->last - len, SEEK_SET) < 0 ||
+           write(log->fd, buf + 2 - len, len + 4) != len + 4 ||
+           lseek(log->fd, log->stored, SEEK_CUR) < 0 ? -1 : 0;
+}
+
+/* Append len bytes from data to the locked and open log file.  len may be zero
+   if recovering and no .add file was found.  In that case, the previous state
+   of the foo.gz file is restored.  The data is appended uncompressed in
+   deflate stored blocks.  Return -1 if there was an error reading or writing
+   the foo.gz file. */
+local int log_append(struct log *log, unsigned char *data, size_t len)
+{
+    uint put;
+    off_t end;
+    unsigned char buf[8];
+
+    /* set the last block last-bit and length, in case recovering an
+       interrupted append, then position the file pointer to append to the
+       block */
+    if (log_last(log, 1))
+        return -1;
+
+    /* append, adding stored blocks and updating the offset of the last stored
+       block as needed, and update the total crc and length */
+    while (len) {
+        /* append as much as we can to the last block */
+        put = (MAX_STORE << 10) - log->stored;
+        if (put > len)
+            put = (uint)len;
+        if (put) {
+            if (write(log->fd, data, put) != put)
+                return -1;
+            BAIL(1);
+            log->tcrc = crc32(log->tcrc, data, put);
+            log->tlen += put;
+            log->stored += put;
+            data += put;
+            len -= put;
+        }
+
+        /* if we need to, add a new empty stored block */
+        if (len) {
+            /* mark current block as not last */
+            if (log_last(log, 0))
+                return -1;
+
+            /* point to new, empty stored block */
+            log->last += 4 + log->stored + 1;
+            log->stored = 0;
+        }
+
+        /* mark last block as last, update its length */
+        if (log_last(log, 1))
+            return -1;
+        BAIL(2);
     }
+
+    /* write the new crc and length trailer, and truncate just in case (could
+       be recovering from partial append with a missing foo.add file) */
+    PUT4(buf, log->tcrc);
+    PUT4(buf + 4, log->tlen);
+    if (write(log->fd, buf, 8) != 8 ||
+        (end = lseek(log->fd, 0, SEEK_CUR)) < 0 || ftruncate(log->fd, end))
+        return -1;
+
+    /* write the extra field, marking the log file as done, delete .add file */
+    if (log_mark(log, NO_OP))
+        return -1;
+    strcpy(log->end, ".add");
+    unlink(log->path);          /* ignore error, since may not exist */
+    return 0;
 }
 
-/* write an off_t little-endian to byte buffer */
-local void dice_off(off_t val, unsigned char *buf)
+/* Replace the foo.dict file with the foo.temp file.  Also delete the foo.add
+   file, since the compress operation may have been interrupted before that was
+   done.  Returns 1 if memory could not be allocated, or -1 if reading or
+   writing foo.gz fails, or if the rename fails for some reason other than
+   foo.temp not existing.  foo.temp not existing is a permitted error, since
+   the replace operation may have been interrupted after the rename is done,
+   but before foo.gz is marked as complete. */
+local int log_replace(struct log *log)
 {
-    int n;
+    int ret;
+    char *dest;
+
+    /* delete foo.add file */
+    strcpy(log->end, ".add");
+    unlink(log->path);         /* ignore error, since may not exist */
+    BAIL(3);
+
+    /* rename foo.name to foo.dict, replacing foo.dict if it exists */
+    strcpy(log->end, ".dict");
+    dest = malloc(strlen(log->path) + 1);
+    if (dest == NULL)
+        return -2;
+    strcpy(dest, log->path);
+    strcpy(log->end, ".temp");
+    ret = rename(log->path, dest);
+    free(dest);
+    if (ret && errno != ENOENT)
+        return -1;
+    BAIL(4);
 
-    for (n = 0; n < 8; n++) {
-        *buf++ = val & 0xff;
-        val >>= 8;
+    /* mark the foo.gz file as done */
+    return log_mark(log, NO_OP);
+}
+
+/* Compress the len bytes at data and append the compressed data to the
+   foo.gz deflate data immediately after the previous compressed data.  This
+   overwrites the previous uncompressed data, which was stored in foo.add
+   and is the data provided in data[0..len-1].  If this operation is
+   interrupted, it picks up at the start of this routine, with the foo.add
+   file read in again.  If there is no data to compress (len == 0), then we
+   simply terminate the foo.gz file after the previously compressed data,
+   appending a final empty stored block and the gzip trailer.  Return -1 if
+   reading or writing the log.gz file failed, or -2 if there was a memory
+   allocation failure. */
+local int log_compress(struct log *log, unsigned char *data, size_t len)
+{
+    int fd;
+    uint got, max;
+    ssize_t dict;
+    off_t end;
+    z_stream strm;
+    unsigned char buf[DICT];
+
+    /* compress and append compressed data */
+    if (len) {
+        /* set up for deflate, allocating memory */
+        strm.zalloc = Z_NULL;
+        strm.zfree = Z_NULL;
+        strm.opaque = Z_NULL;
+        if (deflateInit2(&strm, Z_DEFAULT_COMPRESSION, Z_DEFLATED, -15, 8,
+                         Z_DEFAULT_STRATEGY) != Z_OK)
+            return -2;
+
+        /* read in dictionary (last 32K of data that was compressed) */
+        strcpy(log->end, ".dict");
+        fd = open(log->path, O_RDONLY, 0);
+        if (fd >= 0) {
+            dict = read(fd, buf, DICT);
+            close(fd);
+            if (dict < 0) {
+                deflateEnd(&strm);
+                return -1;
+            }
+            if (dict)
+                deflateSetDictionary(&strm, buf, (uint)dict);
+        }
+        log_touch(log);
+
+        /* prime deflate with last bits of previous block, position write
+           pointer to write those bits and overwrite what follows */
+        if (lseek(log->fd, log->first - (log->back > 8 ? 2 : 1),
+                SEEK_SET) < 0 ||
+            read(log->fd, buf, 1) != 1 || lseek(log->fd, -1, SEEK_CUR) < 0) {
+            deflateEnd(&strm);
+            return -1;
+        }
+        deflatePrime(&strm, (8 - log->back) & 7, *buf);
+
+        /* compress, finishing with a partial non-last empty static block */
+        strm.next_in = data;
+        max = (((uint)0 - 1) >> 1) + 1; /* in case int smaller than size_t */
+        do {
+            strm.avail_in = len > max ? max : (uint)len;
+            len -= strm.avail_in;
+            do {
+                strm.avail_out = DICT;
+                strm.next_out = buf;
+                deflate(&strm, len ? Z_NO_FLUSH : Z_PARTIAL_FLUSH);
+                got = DICT - strm.avail_out;
+                if (got && write(log->fd, buf, got) != got) {
+                    deflateEnd(&strm);
+                    return -1;
+                }
+                log_touch(log);
+            } while (strm.avail_out == 0);
+        } while (len);
+        deflateEnd(&strm);
+        BAIL(5);
+
+        /* find start of empty static block -- scanning backwards the first one
+           bit is the second bit of the block, if the last byte is zero, then
+           we know the byte before that has a one in the top bit, since an
+           empty static block is ten bits long */
+        if ((log->first = lseek(log->fd, -1, SEEK_CUR)) < 0 ||
+            read(log->fd, buf, 1) != 1)
+            return -1;
+        log->first++;
+        if (*buf) {
+            log->back = 1;
+            while ((*buf & ((uint)1 << (8 - log->back++))) == 0)
+                ;       /* guaranteed to terminate, since *buf != 0 */
+        }
+        else
+            log->back = 10;
+
+        /* update compressed crc and length */
+        log->ccrc = log->tcrc;
+        log->clen = log->tlen;
+    }
+    else {
+        /* no data to compress -- fix up existing gzip stream */
+        log->tcrc = log->ccrc;
+        log->tlen = log->clen;
     }
+
+    /* complete and truncate gzip stream */
+    log->last = log->first;
+    log->stored = 0;
+    PUT4(buf, log->tcrc);
+    PUT4(buf + 4, log->tlen);
+    if (log_last(log, 1) || write(log->fd, buf, 8) != 8 ||
+        (end = lseek(log->fd, 0, SEEK_CUR)) < 0 || ftruncate(log->fd, end))
+        return -1;
+    BAIL(6);
+
+    /* mark as being in the replace operation */
+    if (log_mark(log, REPLACE_OP))
+        return -1;
+
+    /* execute the replace operation and mark the file as done */
+    return log_replace(log);
 }
 
-/* initial, empty gzip file for appending */
-local char empty_gz[] = {
-    0x1f, 0x8b,                 /* magic gzip id */
-    8,                          /* compression method is deflate */
-    4,                          /* there is an extra field */
-    0, 0, 0, 0,                 /* no modification time provided */
-    0, 0xff,                    /* no extra flags, no OS */
-    20, 0, 'a', 'p', 16, 0,     /* extra field with "ap" subfield */
-    32, 0, 0, 0, 0, 0, 0, 0,    /* offset of uncompressed data */
-    32, 0, 0, 0, 0, 0, 0, 0,    /* offset of last block */
-    1, 0, 0, 0xff, 0xff,        /* empty stored block (last) */
-    0, 0, 0, 0,                 /* crc */
-    0, 0, 0, 0                  /* uncompressed length */
-};
+/* log a repair record to the .repairs file */
+local void log_log(struct log *log, int op, char *record)
+{
+    time_t now;
+    FILE *rec;
 
-/* initialize a log object with locking */
-void *gzlog_open(char *path)
+    now = time(NULL);
+    strcpy(log->end, ".repairs");
+    rec = fopen(log->path, "a");
+    if (rec == NULL)
+        return;
+    fprintf(rec, "%.24s %s recovery: %s\n", ctime(&now), op == APPEND_OP ?
+            "append" : (op == COMPRESS_OP ? "compress" : "replace"), record);
+    fclose(rec);
+    return;
+}
+
+/* Recover the interrupted operation op.  First read foo.add for recovering an
+   append or compress operation.  Return -1 if there was an error reading or
+   writing foo.gz or reading an existing foo.add, or -2 if there was a memory
+   allocation failure. */
+local int log_recover(struct log *log, int op)
 {
-    unsigned xlen;
-    unsigned char temp[20];
-    unsigned sub_len;
-    int good;
-    gz_log *log;
-
-    /* allocate log structure */
-    log = malloc(sizeof(gz_log));
-    if (log == NULL)
-        return NULL;
-    log->id = GZLOGID;
+    int fd, ret = 0;
+    unsigned char *data = NULL;
+    size_t len = 0;
+    struct stat st;
 
-    /* open file, creating it if necessary, and locking it */
-    log->fd = open(path, O_RDWR | O_CREAT, 0600);
-    if (log->fd < 0) {
-        free(log);
-        return NULL;
+    /* log recovery */
+    log_log(log, op, "start");
+
+    /* load foo.add file if expected and present */
+    if (op == APPEND_OP || op == COMPRESS_OP) {
+        strcpy(log->end, ".add");
+        if (stat(log->path, &st) == 0 && st.st_size) {
+            len = (size_t)(st.st_size);
+            if (len != st.st_size || (data = malloc(st.st_size)) == NULL) {
+                log_log(log, op, "allocation failure");
+                return -2;
+            }
+            if ((fd = open(log->path, O_RDONLY, 0)) < 0) {
+                log_log(log, op, ".add file read failure");
+                return -1;
+            }
+            ret = read(fd, data, len) != len;
+            close(fd);
+            if (ret) {
+                log_log(log, op, ".add file read failure");
+                return -1;
+            }
+            log_log(log, op, "loaded .add file");
+        }
+        else
+            log_log(log, op, "missing .add file!");
+    }
+
+    /* recover the interrupted operation */
+    switch (op) {
+    case APPEND_OP:
+        ret = log_append(log, data, len);
+        break;
+    case COMPRESS_OP:
+        ret = log_compress(log, data, len);
+        break;
+    case REPLACE_OP:
+        ret = log_replace(log);
     }
-    if (lock(log->fd)) {
+
+    /* log status */
+    log_log(log, op, ret ? "failure" : "complete");
+
+    /* clean up */
+    if (data != NULL)
+        free(data);
+    return ret;
+}
+
+/* Close the foo.gz file (if open) and release the lock. */
+local void log_close(struct log *log)
+{
+    if (log->fd >= 0)
         close(log->fd);
-        free(log);
-        return NULL;
+    log->fd = -1;
+    log_unlock(log);
+}
+
+/* Open foo.gz, verify the header, and load the extra field contents, after
+   first creating the foo.lock file to gain exclusive access to the foo.*
+   files.  If foo.gz does not exist or is empty, then write the initial header,
+   extra, and body content of an empty foo.gz log file.  If there is an error
+   creating the lock file due to access restrictions, or an error reading or
+   writing the foo.gz file, or if the foo.gz file is not a proper log file for
+   this object (e.g. not a gzip file or does not contain the expected extra
+   field), then return true.  If there is an error, the lock is released.
+   Otherwise, the lock is left in place. */
+local int log_open(struct log *log)
+{
+    int op;
+
+    /* release open file resource if left over -- can occur if lock lost
+       between gzlog_open() and gzlog_write() */
+    if (log->fd >= 0)
+        close(log->fd);
+    log->fd = -1;
+
+    /* negotiate exclusive access */
+    if (log_lock(log) < 0)
+        return -1;
+
+    /* open the log file, foo.gz */
+    strcpy(log->end, ".gz");
+    log->fd = open(log->path, O_RDWR | O_CREAT, 0644);
+    if (log->fd < 0) {
+        log_close(log);
+        return -1;
     }
 
-    /* if file is empty, write new gzip stream */
+    /* if new, initialize foo.gz with an empty log, delete old dictionary */
     if (lseek(log->fd, 0, SEEK_END) == 0) {
-        if (write(log->fd, empty_gz, sizeof(empty_gz)) != sizeof(empty_gz)) {
-            log_clean(log);
-            return NULL;
+        if (write(log->fd, log_gzhead, HEAD) != HEAD ||
+            write(log->fd, log_gzext, EXTRA) != EXTRA ||
+            write(log->fd, log_gzbody, BODY) != BODY) {
+            log_close(log);
+            return -1;
         }
+        strcpy(log->end, ".dict");
+        unlink(log->path);
     }
 
-    /* check gzip header */
-    (void)lseek(log->fd, 0, SEEK_SET);
-    if (read(log->fd, temp, 12) != 12 || temp[0] != 0x1f ||
-        temp[1] != 0x8b || temp[2] != 8 || (temp[3] & 4) == 0) {
-        log_clean(log);
-        return NULL;
+    /* verify log file and load extra field information */
+    if ((op = log_head(log)) < 0) {
+        log_close(log);
+        return -1;
     }
 
-    /* process extra field to find "ap" sub-field */
-    xlen = temp[10] + (temp[11] << 8);
-    good = 0;
-    while (xlen) {
-        if (xlen < 4 || read(log->fd, temp, 4) != 4)
-            break;
-        sub_len = temp[2];
-        sub_len += temp[3] << 8;
-        xlen -= 4;
-        if (memcmp(temp, "ap", 2) == 0 && sub_len == 16) {
-            good = 1;
-            break;
-        }
-        if (xlen < sub_len)
-            break;
-        (void)lseek(log->fd, sub_len, SEEK_CUR);
-        xlen -= sub_len;
+    /* check for interrupted process and if so, recover */
+    if (op != NO_OP && log_recover(log, op)) {
+        log_close(log);
+        return -1;
     }
-    if (!good) {
-        log_clean(log);
+
+    /* touch the lock file to prevent another process from grabbing it */
+    log_touch(log);
+    return 0;
+}
+
+/* See gzlog.h for the description of the external methods below */
+gzlog *gzlog_open(char *path)
+{
+    size_t n;
+    struct log *log;
+
+    /* check arguments */
+    if (path == NULL || *path == 0)
         return NULL;
-    }
 
-    /* read in "ap" sub-field */
-    log->extra = lseek(log->fd, 0, SEEK_CUR);
-    if (read(log->fd, temp, 16) != 16) {
-        log_clean(log);
+    /* allocate and initialize log structure */
+    log = malloc(sizeof(struct log));
+    if (log == NULL)
+        return NULL;
+    strcpy(log->id, LOGID);
+    log->fd = -1;
+
+    /* save path and end of path for name construction */
+    n = strlen(path);
+    log->path = malloc(n + 9);              /* allow for ".repairs" */
+    if (log->path == NULL) {
+        free(log);
         return NULL;
     }
-    log->mark_off = make_off(temp);
-    log->last_off = make_off(temp + 8);
-
-    /* get crc, length of gzip file */
-    (void)lseek(log->fd, log->last_off, SEEK_SET);
-    if (read(log->fd, temp, 13) != 13 ||
-        memcmp(temp, "\001\000\000\377\377", 5) != 0) {
-        log_clean(log);
+    strcpy(log->path, path);
+    log->end = log->path + n;
+
+    /* gain exclusive access and verify log file -- may perform a
+       recovery operation if needed */
+    if (log_open(log)) {
+        free(log->path);
+        free(log);
         return NULL;
     }
-    log->crc = make_ulg(temp + 5);
-    log->len = make_ulg(temp + 9);
 
-    /* set up to write over empty last block */
-    (void)lseek(log->fd, log->last_off + 5, SEEK_SET);
-    log->stored = 0;
-    return (void *)log;
+    /* return pointer to log structure */
+    return log;
 }
 
-/* maximum amount to put in a stored block before starting a new one */
-#define MAX_BLOCK 16384
-
-/* write a block to a log object */
-int gzlog_write(void *obj, char *data, size_t len)
+/* gzlog_compress() return values:
+    0: all good
+   -1: file i/o error (usually access issue)
+   -2: memory allocation failure
+   -3: invalid log pointer argument */
+int gzlog_compress(gzlog *logd)
 {
-    size_t some;
-    unsigned char temp[5];
-    gz_log *log;
+    int fd, ret;
+    uint block;
+    size_t len, next;
+    unsigned char *data, buf[5];
+    struct log *log = logd;
 
-    /* check object */
-    log = (gz_log *)obj;
-    if (log == NULL || log->id != GZLOGID)
-        return 1;
+    /* check arguments */
+    if (log == NULL || strcmp(log->id, LOGID) || len < 0)
+        return -3;
 
-    /* write stored blocks until all of the input is written */
-    do {
-        some = MAX_BLOCK - log->stored;
-        if (some > len)
-            some = len;
-        if (write(log->fd, data, some) != some)
-            return 1;
-        log->crc = crc32(log->crc, data, some);
-        log->len += some;
-        len -= some;
-        data += some;
-        log->stored += some;
-
-        /* if the stored block is full, end it and start another */
-        if (log->stored == MAX_BLOCK) {
-            (void)lseek(log->fd, log->last_off, SEEK_SET);
-            temp[0] = 0;
-            dice_ulg(log->stored + ((unsigned long)(~log->stored) << 16),
-                     temp + 1);
-            if (write(log->fd, temp, 5) != 5)
-                return 1;
-            log->last_off = lseek(log->fd, log->stored, SEEK_CUR);
-            (void)lseek(log->fd, 5, SEEK_CUR);
-            log->stored = 0;
-        }
-    } while (len);
-    return 0;
-}
+    /* see if we lost the lock -- if so get it again and reload the extra
+       field information (it probably changed), recover last operation if
+       necessary */
+    if (log_check(log) && log_open(log))
+        return -1;
 
-/* recompress the remaining stored deflate data in place */
-local int recomp(gz_log *log)
-{
-    z_stream strm;
-    size_t len, max;
-    unsigned char *in;
-    unsigned char *out;
-    unsigned char temp[16];
-
-    /* allocate space and read it all in (it's around 1 MB) */
-    len = log->last_off - log->mark_off;
-    max = len + (len >> 12) + (len >> 14) + 11;
-    out = malloc(max);
-    if (out == NULL)
-        return 1;
-    in = malloc(len);
-    if (in == NULL) {
-        free(out);
-        return 1;
-    }
-    (void)lseek(log->fd, log->mark_off, SEEK_SET);
-    if (read(log->fd, in, len) != len) {
-        free(in);
-        free(out);
-        return 1;
-    }
+    /* create space for uncompressed data */
+    len = ((size_t)(log->last - log->first) & ~(((size_t)1 << 10) - 1)) +
+          log->stored;
+    if ((data = malloc(len)) == NULL)
+        return -2;
 
-    /* recompress in memory, decoding stored data as we go */
-    /* note: this assumes that unsigned is four bytes or more */
-    /*       consider not making that assumption */
-    strm.zalloc = Z_NULL;
-    strm.zfree = Z_NULL;
-    strm.opaque = Z_NULL;
-    if (deflateInit2(&strm, Z_BEST_COMPRESSION, Z_DEFLATED, -15, 8,
-        Z_DEFAULT_STRATEGY) != Z_OK) {
-        free(in);
-        free(out);
-        return 1;
-    }
-    strm.next_in = in;
-    strm.avail_out = max;
-    strm.next_out = out;
-    while (len >= 5) {
-        if (strm.next_in[0] != 0)
+    /* do statement here is just a cheap trick for error handling */
+    do {
+        /* read in the uncompressed data */
+        if (lseek(log->fd, log->first - 1, SEEK_SET) < 0)
             break;
-        strm.avail_in = strm.next_in[1] + (strm.next_in[2] << 8);
-        strm.next_in += 5;
-        len -= 5;
-        if (strm.avail_in != 0) {
-            if (len < strm.avail_in)
+        next = 0;
+        while (next < len) {
+            if (read(log->fd, buf, 5) != 5)
                 break;
-            len -= strm.avail_in;
-            (void)deflate(&strm, Z_NO_FLUSH);
-            if (strm.avail_in != 0 || strm.avail_out == 0)
+            block = PULL2(buf + 1);
+            if (next + block > len ||
+                read(log->fd, (char *)data + next, block) != block)
                 break;
+            next += block;
         }
-    }
-    (void)deflate(&strm, Z_SYNC_FLUSH);
-    (void)deflateEnd(&strm);
-    free(in);
-    if (len != 0 || strm.avail_out == 0) {
-        free(out);
-        return 1;
-    }
+        if (lseek(log->fd, 0, SEEK_CUR) != log->last + 4 + log->stored)
+            break;
+        log_touch(log);
 
-    /* overwrite stored data with compressed data */
-    (void)lseek(log->fd, log->mark_off, SEEK_SET);
-    len = max - strm.avail_out;
-    if (write(log->fd, out, len) != len) {
-        free(out);
-        return 1;
-    }
-    free(out);
-
-    /* write last empty block, crc, and length */
-    log->mark_off = log->last_off = lseek(log->fd, 0, SEEK_CUR);
-    temp[0] = 1;
-    dice_ulg(0xffffL << 16, temp + 1);
-    dice_ulg(log->crc, temp + 5);
-    dice_ulg(log->len, temp + 9);
-    if (write(log->fd, temp, 13) != 13)
-        return 1;
+        /* write the uncompressed data to the .add file */
+        strcpy(log->end, ".add");
+        fd = open(log->path, O_WRONLY | O_CREAT | O_TRUNC, 0644);
+        if (fd < 0)
+            break;
+        ret = write(fd, data, len) != len;
+        if (ret | close(fd))
+            break;
+        log_touch(log);
 
-    /* truncate file to discard remaining stored data and old trailer */
-    ftruncate(log->fd, lseek(log->fd, 0, SEEK_CUR));
+        /* write the dictionary for the next compress to the .temp file */
+        strcpy(log->end, ".temp");
+        fd = open(log->path, O_WRONLY | O_CREAT | O_TRUNC, 0644);
+        if (fd < 0)
+            break;
+        next = DICT > len ? len : DICT;
+        ret = write(fd, (char *)data + len - next, next) != next;
+        if (ret | close(fd))
+            break;
+        log_touch(log);
 
-    /* update extra field to point to new last empty block */
-    (void)lseek(log->fd, log->extra, SEEK_SET);
-    dice_off(log->mark_off, temp);
-    dice_off(log->last_off, temp + 8);
-    if (write(log->fd, temp, 16) != 16)
-        return 1;
-    return 0;
-}
+        /* roll back to compressed data, mark the compress in progress */
+        log->last = log->first;
+        log->stored = 0;
+        if (log_mark(log, COMPRESS_OP))
+            break;
+        BAIL(7);
+
+        /* compress and append the data (clears mark) */
+        ret = log_compress(log, data, len);
+        free(data);
+        return ret;
+    } while (0);
 
-/* maximum accumulation of stored blocks before compressing */
-#define MAX_STORED 1048576
+    /* broke out of do above on i/o error */
+    free(data);
+    return -1;
+}
 
-/* close log object */
-int gzlog_close(void *obj)
+/* gzlog_write() return values:
+    0: all good
+   -1: file i/o error (usually access issue)
+   -2: memory allocation failure
+   -3: invalid log pointer argument */
+int gzlog_write(gzlog *logd, void *data, size_t len)
 {
-    unsigned char temp[8];
-    gz_log *log;
+    int fd, ret;
+    struct log *log = logd;
 
-    /* check object */
-    log = (gz_log *)obj;
-    if (log == NULL || log->id != GZLOGID)
-        return 1;
+    /* check arguments */
+    if (log == NULL || strcmp(log->id, LOGID) || len < 0)
+        return -3;
+    if (data == NULL || len == 0)
+        return 0;
 
-    /* go to start of most recent block being written */
-    (void)lseek(log->fd, log->last_off, SEEK_SET);
-
-    /* if some stuff was put there, update block */
-    if (log->stored) {
-        temp[0] = 0;
-        dice_ulg(log->stored + ((unsigned long)(~log->stored) << 16),
-                 temp + 1);
-        if (write(log->fd, temp, 5) != 5)
-            return 1;
-        log->last_off = lseek(log->fd, log->stored, SEEK_CUR);
-    }
+    /* see if we lost the lock -- if so get it again and reload the extra
+       field information (it probably changed), recover last operation if
+       necessary */
+    if (log_check(log) && log_open(log))
+        return -1;
 
-    /* write last block (empty) */
-    if (write(log->fd, "\001\000\000\377\377", 5) != 5)
-        return 1;
+    /* create and write .add file */
+    strcpy(log->end, ".add");
+    fd = open(log->path, O_WRONLY | O_CREAT | O_TRUNC, 0644);
+    if (fd < 0)
+        return -1;
+    ret = write(fd, data, len) != len;
+    if (ret | close(fd))
+        return -1;
+    log_touch(log);
 
-    /* write updated crc and uncompressed length */
-    dice_ulg(log->crc, temp);
-    dice_ulg(log->len, temp + 4);
-    if (write(log->fd, temp, 8) != 8)
-        return 1;
+    /* mark log file with append in progress */
+    if (log_mark(log, APPEND_OP))
+        return -1;
+    BAIL(8);
 
-    /* put offset of that last block in gzip extra block */
-    (void)lseek(log->fd, log->extra + 8, SEEK_SET);
-    dice_off(log->last_off, temp);
-    if (write(log->fd, temp, 8) != 8)
-        return 1;
+    /* append data (clears mark) */
+    if (log_append(log, data, len))
+        return -1;
 
-    /* if more than 1 MB stored, then time to compress it */
-    if (log->last_off - log->mark_off > MAX_STORED) {
-        if (recomp(log))
-            return 1;
-    }
+    /* check to see if it's time to compress -- if not, then done */
+    if (((log->last - log->first) >> 10) + (log->stored >> 10) < TRIGGER)
+        return 0;
+
+    /* time to compress */
+    return gzlog_compress(log);
+}
+
+/* gzlog_close() return values:
+    0: ok
+   -3: invalid log pointer argument */
+int gzlog_close(gzlog *logd)
+{
+    struct log *log = logd;
 
-    /* unlock and close file */
-    log_clean(log);
+    /* check arguments */
+    if (log == NULL || strcmp(log->id, LOGID))
+        return -3;
+
+    /* close the log file and release the lock */
+    log_close(log);
+
+    /* free structure and return */
+    if (log->path != NULL)
+        free(log->path);
+    strcpy(log->id, "bad");
+    free(log);
     return 0;
 }
diff --git a/zlib/examples/gzlog.h b/zlib/examples/gzlog.h
index a800bd539..c46142673 100644
--- a/zlib/examples/gzlog.h
+++ b/zlib/examples/gzlog.h
@@ -1,6 +1,6 @@
 /* gzlog.h
-  Copyright (C) 2004 Mark Adler, all rights reserved
-  version 1.0, 26 Nov 2004
+  Copyright (C) 2004, 2008 Mark Adler, all rights reserved
+  version 2.0, 25 Apr 2008
 
   This software is provided 'as-is', without any express or implied
   warranty.  In no event will the author be held liable for any damages
@@ -21,38 +21,69 @@
   Mark Adler    madler@alumni.caltech.edu
  */
 
+/* Version History:
+   1.0  26 Nov 2004  First version
+   2.0  25 Apr 2008  Complete redesign for recovery of interrupted operations
+                     Interface changed slightly in that now path is a prefix
+                     Compression now occurs as needed during gzlog_write()
+                     gzlog_write() now always leaves the log file as valid gzip
+ */
+
 /*
    The gzlog object allows writing short messages to a gzipped log file,
    opening the log file locked for small bursts, and then closing it.  The log
-   object works by appending stored data to the gzip file until 1 MB has been
-   accumulated.  At that time, the stored data is compressed, and replaces the
-   uncompressed data in the file.  The log file is truncated to its new size at
-   that time.  After closing, the log file is always valid gzip file that can
-   decompressed to recover what was written.
-
-   A gzip header "extra" field contains two file offsets for appending.  The
-   first points to just after the last compressed data.  The second points to
-   the last stored block in the deflate stream, which is empty.  All of the
-   data between those pointers is uncompressed.
+   object works by appending stored (uncompressed) data to the gzip file until
+   1 MB has been accumulated.  At that time, the stored data is compressed, and
+   replaces the uncompressed data in the file.  The log file is truncated to
+   its new size at that time.  After each write operation, the log file is a
+   valid gzip file that can decompressed to recover what was written.
+
+   The gzlog operations can be interupted at any point due to an application or
+   system crash, and the log file will be recovered the next time the log is
+   opened with gzlog_open().
  */
 
+#ifndef GZLOG_H
+#define GZLOG_H
+
+/* gzlog object type */
+typedef void gzlog;
+
 /* Open a gzlog object, creating the log file if it does not exist.  Return
-   NULL on error.  Note that gzlog_open() could take a long time to return if
-   there is difficulty in locking the file. */
-void *gzlog_open(char *path);
-
-/* Write to a gzlog object.  Return non-zero on error.  This function will
-   simply write data to the file uncompressed.  Compression of the data
-   will not occur until gzlog_close() is called.  It is expected that
-   gzlog_write() is used for a short message, and then gzlog_close() is
-   called.  If a large amount of data is to be written, then the application
-   should write no more than 1 MB at a time with gzlog_write() before
-   calling gzlog_close() and then gzlog_open() again. */
-int gzlog_write(void *log, char *data, size_t len);
-
-/* Close a gzlog object.  Return non-zero on error.  The log file is locked
-   until this function is called.  This function will compress stored data
-   at the end of the gzip file if at least 1 MB has been accumulated.  Note
-   that the file will not be a valid gzip file until this function completes.
- */
-int gzlog_close(void *log);
+   NULL on error.  Note that gzlog_open() could take a while to complete if it
+   has to wait to verify that a lock is stale (possibly for five minutes), or
+   if there is significant contention with other instantiations of this object
+   when locking the resource.  path is the prefix of the file names created by
+   this object.  If path is "foo", then the log file will be "foo.gz", and
+   other auxiliary files will be created and destroyed during the process:
+   "foo.dict" for a compression dictionary, "foo.temp" for a temporary (next)
+   dictionary, "foo.add" for data being added or compressed, "foo.lock" for the
+   lock file, and "foo.repairs" to log recovery operations performed due to
+   interrupted gzlog operations.  A gzlog_open() followed by a gzlog_close()
+   will recover a previously interrupted operation, if any. */
+gzlog *gzlog_open(char *path);
+
+/* Write to a gzlog object.  Return zero on success, -1 if there is a file i/o
+   error on any of the gzlog files (this should not happen if gzlog_open()
+   succeeded, unless the device has run out of space or leftover auxiliary
+   files have permissions or ownership that prevent their use), -2 if there is
+   a memory allocation failure, or -3 if the log argument is invalid (e.g. if
+   it was not created by gzlog_open()).  This function will write data to the
+   file uncompressed, until 1 MB has been accumulated, at which time that data
+   will be compressed.  The log file will be a valid gzip file upon successful
+   return. */
+int gzlog_write(gzlog *log, void *data, size_t len);
+
+/* Force compression of any uncompressed data in the log.  This should be used
+   sparingly, if at all.  The main application would be when a log file will
+   not be appended to again.  If this is used to compress frequently while
+   appending, it will both significantly increase the execution time and
+   reduce the compression ratio.  The return codes are the same as for
+   gzlog_write(). */
+int gzlog_compress(gzlog *log);
+
+/* Close a gzlog object.  Return zero on success, -3 if the log argument is
+   invalid.  The log object is freed, and so cannot be referenced again. */
+int gzlog_close(gzlog *log);
+
+#endif
diff --git a/zlib/examples/zlib_how.html b/zlib/examples/zlib_how.html
index 40998dbf0..444ff1c9a 100644
--- a/zlib/examples/zlib_how.html
+++ b/zlib/examples/zlib_how.html
@@ -4,7 +4,7 @@
 <head>
 <meta http-equiv="Content-Type" content="text/html; charset=ISO-8859-1">
 <title>zlib Usage Example</title>
-<!--  Copyright (c) 2004 Mark Adler.  -->
+<!--  Copyright (c) 2004, 2005 Mark Adler.  -->
 </head>
 <body bgcolor="#FFFFFF" text="#000000" link="#0000FF" vlink="#00A000">
 <h2 align="center"> zlib Usage Example </h2>
@@ -21,13 +21,16 @@ Without further adieu, here is the program <a href="zpipe.c"><tt>zpipe.c</tt></a
 <pre><b>
 /* zpipe.c: example of proper use of zlib's inflate() and deflate()
    Not copyrighted -- provided to the public domain
-   Version 1.2  9 November 2004  Mark Adler */
+   Version 1.4  11 December 2005  Mark Adler */
 
 /* Version history:
    1.0  30 Oct 2004  First version
    1.1   8 Nov 2004  Add void casting for unused return values
                      Use switch statement for inflate() return values
    1.2   9 Nov 2004  Add assertions to document zlib guarantees
+   1.3   6 Apr 2005  Remove incorrect assertion in inf()
+   1.4  11 Dec 2005  Add hack to avoid MSDOS end-of-line conversions
+                     Avoid some compiler warnings for input and output buffers
  */
 </b></pre><!-- -->
 We now include the header files for the required definitions.  From
@@ -47,6 +50,21 @@ functions <tt>inflateInit()</tt>, <tt>inflate()</tt>, and
 #include &lt;assert.h&gt;
 #include "zlib.h"
 </b></pre><!-- -->
+This is an ugly hack required to avoid corruption of the input and output data on
+Windows/MS-DOS systems.  Without this, those systems would assume that the input and output
+files are text, and try to convert the end-of-line characters from one standard to
+another.  That would corrupt binary data, and in particular would render the compressed data unusable.
+This sets the input and output to binary which suppresses the end-of-line conversions.
+<tt>SET_BINARY_MODE()</tt> will be used later on <tt>stdin</tt> and <tt>stdout</tt>, at the beginning of <tt>main()</tt>.
+<pre><b>
+#if defined(MSDOS) || defined(OS2) || defined(WIN32) || defined(__CYGWIN__)
+#  include &lt;fcntl.h&gt;
+#  include &lt;io.h&gt;
+#  define SET_BINARY_MODE(file) setmode(fileno(file), O_BINARY)
+#else
+#  define SET_BINARY_MODE(file)
+#endif
+</b></pre><!-- -->
 <tt>CHUNK</tt> is simply the buffer size for feeding data to and pulling data
 from the <em>zlib</em> routines.  Larger buffer sizes would be more efficient,
 especially for <tt>inflate()</tt>.  If the memory is available, buffers sizes
@@ -80,8 +98,8 @@ is used to pass information to and from the <em>zlib</em> routines, and to maint
     int ret, flush;
     unsigned have;
     z_stream strm;
-    char in[CHUNK];
-    char out[CHUNK];
+    unsigned char in[CHUNK];
+    unsigned char out[CHUNK];
 </b></pre><!-- -->
 The first thing we do is to initialize the <em>zlib</em> state for compression using
 <tt>deflateInit()</tt>.  This must be done before the first use of <tt>deflate()</tt>.
@@ -313,8 +331,8 @@ can tell from the <em>zlib</em> stream itself when the stream is complete.
     int ret;
     unsigned have;
     z_stream strm;
-    char in[CHUNK];
-    char out[CHUNK];
+    unsigned char in[CHUNK];
+    unsigned char out[CHUNK];
 </b></pre><!-- -->
 The initialization of the state is the same, except that there is no compression level,
 of course, and two more elements of the structure are initialized.  <tt>avail_in</tt>
@@ -494,6 +512,10 @@ int main(int argc, char **argv)
 {
     int ret;
 
+    /* avoid end-of-line conversions */
+    SET_BINARY_MODE(stdin);
+    SET_BINARY_MODE(stdout);
+
     /* do compression if no arguments */
     if (argc == 1) {
         ret = def(stdin, stdout, Z_DEFAULT_COMPRESSION);
@@ -518,6 +540,6 @@ int main(int argc, char **argv)
 }
 </b></pre>
 <hr>
-<i>Copyright (c) 2004 by Mark Adler<br>Last modified 13 November 2004</i>
+<i>Copyright (c) 2004, 2005 by Mark Adler<br>Last modified 11 December 2005</i>
 </body>
 </html>
diff --git a/zlib/examples/zpipe.c b/zlib/examples/zpipe.c
index 26abb56a9..83535d169 100644
--- a/zlib/examples/zpipe.c
+++ b/zlib/examples/zpipe.c
@@ -1,6 +1,6 @@
 /* zpipe.c: example of proper use of zlib's inflate() and deflate()
    Not copyrighted -- provided to the public domain
-   Version 1.2  9 November 2004  Mark Adler */
+   Version 1.4  11 December 2005  Mark Adler */
 
 /* Version history:
    1.0  30 Oct 2004  First version
@@ -8,6 +8,8 @@
                      Use switch statement for inflate() return values
    1.2   9 Nov 2004  Add assertions to document zlib guarantees
    1.3   6 Apr 2005  Remove incorrect assertion in inf()
+   1.4  11 Dec 2005  Add hack to avoid MSDOS end-of-line conversions
+                     Avoid some compiler warnings for input and output buffers
  */
 
 #include <stdio.h>
@@ -15,6 +17,14 @@
 #include <assert.h>
 #include "zlib.h"
 
+#if defined(MSDOS) || defined(OS2) || defined(WIN32) || defined(__CYGWIN__)
+#  include <fcntl.h>
+#  include <io.h>
+#  define SET_BINARY_MODE(file) setmode(fileno(file), O_BINARY)
+#else
+#  define SET_BINARY_MODE(file)
+#endif
+
 #define CHUNK 16384
 
 /* Compress from file source to file dest until EOF on source.
@@ -28,8 +38,8 @@ int def(FILE *source, FILE *dest, int level)
     int ret, flush;
     unsigned have;
     z_stream strm;
-    char in[CHUNK];
-    char out[CHUNK];
+    unsigned char in[CHUNK];
+    unsigned char out[CHUNK];
 
     /* allocate deflate state */
     strm.zalloc = Z_NULL;
@@ -84,8 +94,8 @@ int inf(FILE *source, FILE *dest)
     int ret;
     unsigned have;
     z_stream strm;
-    char in[CHUNK];
-    char out[CHUNK];
+    unsigned char in[CHUNK];
+    unsigned char out[CHUNK];
 
     /* allocate inflate state */
     strm.zalloc = Z_NULL;
@@ -167,6 +177,10 @@ int main(int argc, char **argv)
 {
     int ret;
 
+    /* avoid end-of-line conversions */
+    SET_BINARY_MODE(stdin);
+    SET_BINARY_MODE(stdout);
+
     /* do compression if no arguments */
     if (argc == 1) {
         ret = def(stdin, stdout, Z_DEFAULT_COMPRESSION);
diff --git a/zlib/examples/zran.c b/zlib/examples/zran.c
index 8c7717eb2..617a13086 100644
--- a/zlib/examples/zran.c
+++ b/zlib/examples/zran.c
@@ -351,7 +351,7 @@ int main(int argc, char **argv)
     int len;
     off_t offset;
     FILE *in;
-    struct access *index;
+    struct access *index = NULL;
     unsigned char buf[CHUNK];
 
     /* open input file */