Checked in the following released items:

xkeyboard-config-1.4.tar.gz
ttf-bitstream-vera-1.10.tar.gz
font-alias-1.0.1.tar.gz
font-sun-misc-1.0.0.tar.gz
font-sun-misc-1.0.0.tar.gz
font-sony-misc-1.0.0.tar.gz
font-schumacher-misc-1.0.0.tar.gz
font-mutt-misc-1.0.0.tar.gz
font-misc-misc-1.0.0.tar.gz
font-misc-meltho-1.0.0.tar.gz
font-micro-misc-1.0.0.tar.gz
font-jis-misc-1.0.0.tar.gz
font-isas-misc-1.0.0.tar.gz
font-dec-misc-1.0.0.tar.gz
font-daewoo-misc-1.0.0.tar.gz
font-cursor-misc-1.0.0.tar.gz
font-arabic-misc-1.0.0.tar.gz
font-winitzki-cyrillic-1.0.0.tar.gz
font-misc-cyrillic-1.0.0.tar.gz
font-cronyx-cyrillic-1.0.0.tar.gz
font-screen-cyrillic-1.0.1.tar.gz
font-xfree86-type1-1.0.1.tar.gz
font-adobe-utopia-type1-1.0.1.tar.gz
font-ibm-type1-1.0.0.tar.gz
font-bitstream-type1-1.0.0.tar.gz
font-bitstream-speedo-1.0.0.tar.gz
font-bh-ttf-1.0.0.tar.gz
font-bh-type1-1.0.0.tar.gz
font-bitstream-100dpi-1.0.0.tar.gz
font-bh-lucidatypewriter-100dpi-1.0.0.tar.gz
font-bh-100dpi-1.0.0.tar.gz
font-adobe-utopia-100dpi-1.0.1.tar.gz
font-adobe-100dpi-1.0.0.tar.gz
font-util-1.0.1.tar.gz
font-bitstream-75dpi-1.0.0.tar.gz
font-bh-lucidatypewriter-75dpi-1.0.0.tar.gz
font-adobe-utopia-75dpi-1.0.1.tar.gz
font-bh-75dpi-1.0.0.tar.gz
bdftopcf-1.0.1.tar.gz
font-adobe-75dpi-1.0.0.tar.gz
mkfontscale-1.0.6.tar.gz
openssl-0.9.8k.tar.gz
bigreqsproto-1.0.2.tar.gz
xtrans-1.2.2.tar.gz
resourceproto-1.0.2.tar.gz
inputproto-1.4.4.tar.gz
compositeproto-0.4.tar.gz
damageproto-1.1.0.tar.gz
zlib-1.2.3.tar.gz
xkbcomp-1.0.5.tar.gz
freetype-2.3.9.tar.gz
pthreads-w32-2-8-0-release.tar.gz
pixman-0.12.0.tar.gz
kbproto-1.0.3.tar.gz
evieext-1.0.2.tar.gz
fixesproto-4.0.tar.gz
recordproto-1.13.2.tar.gz
randrproto-1.2.2.tar.gz
scrnsaverproto-1.1.0.tar.gz
renderproto-0.9.3.tar.gz
xcmiscproto-1.1.2.tar.gz
fontsproto-2.0.2.tar.gz
xextproto-7.0.3.tar.gz
xproto-7.0.14.tar.gz
libXdmcp-1.0.2.tar.gz
libxkbfile-1.0.5.tar.gz
libfontenc-1.0.4.tar.gz
libXfont-1.3.4.tar.gz
libX11-1.1.5.tar.gz
libXau-1.0.4.tar.gz
libxcb-1.1.tar.gz
xorg-server-1.5.3.tar.gz

1 files changed, 322 insertions, 0 deletions

diff --git a/zlib/minigzip.c b/zlib/minigzip.c
new file mode 100644
index 000000000..4524b96a1
--- /dev/null
+++ b/zlib/minigzip.c
@@ -0,0 +1,322 @@
+/* minigzip.c -- simulate gzip using the zlib compression library
+ * Copyright (C) 1995-2005 Jean-loup Gailly.
+ * For conditions of distribution and use, see copyright notice in zlib.h
+ */
+
+/*
+ * minigzip is a minimal implementation of the gzip utility. This is
+ * only an example of using zlib and isn't meant to replace the
+ * full-featured gzip. No attempt is made to deal with file systems
+ * limiting names to 14 or 8+3 characters, etc... Error checking is
+ * very limited. So use minigzip only for testing; use gzip for the
+ * real thing. On MSDOS, use only on file names without extension
+ * or in pipe mode.
+ */
+
+/* @(#) $Id$ */
+
+#include <stdio.h>
+#include "zlib.h"
+
+#ifdef STDC
+#  include <string.h>
+#  include <stdlib.h>
+#endif
+
+#ifdef USE_MMAP
+#  include <sys/types.h>
+#  include <sys/mman.h>
+#  include <sys/stat.h>
+#endif
+
+#if defined(MSDOS) || defined(OS2) || defined(WIN32) || defined(__CYGWIN__)
+#  include <fcntl.h>
+#  include <io.h>
+#  define SET_BINARY_MODE(file) setmode(fileno(file), O_BINARY)
+#else
+#  define SET_BINARY_MODE(file)
+#endif
+
+#ifdef VMS
+#  define unlink delete
+#  define GZ_SUFFIX "-gz"
+#endif
+#ifdef RISCOS
+#  define unlink remove
+#  define GZ_SUFFIX "-gz"
+#  define fileno(file) file->__file
+#endif
+#if defined(__MWERKS__) && __dest_os != __be_os && __dest_os != __win32_os
+#  include <unix.h> /* for fileno */
+#endif
+
+#ifndef WIN32 /* unlink already in stdio.h for WIN32 */
+  extern int unlink OF((const char *));
+#endif
+
+#ifndef GZ_SUFFIX
+#  define GZ_SUFFIX ".gz"
+#endif
+#define SUFFIX_LEN (sizeof(GZ_SUFFIX)-1)
+
+#define BUFLEN      16384
+#define MAX_NAME_LEN 1024
+
+#ifdef MAXSEG_64K
+#  define local static
+   /* Needed for systems with limitation on stack size. */
+#else
+#  define local
+#endif
+
+char *prog;
+
+void error            OF((const char *msg));
+void gz_compress      OF((FILE   *in, gzFile out));
+#ifdef USE_MMAP
+int  gz_compress_mmap OF((FILE   *in, gzFile out));
+#endif
+void gz_uncompress    OF((gzFile in, FILE   *out));
+void file_compress    OF((char  *file, char *mode));
+void file_uncompress  OF((char  *file));
+int  main             OF((int argc, char *argv[]));
+
+/* ===========================================================================
+ * Display error message and exit
+ */
+void error(msg)
+    const char *msg;
+{
+    fprintf(stderr, "%s: %s\n", prog, msg);
+    exit(1);
+}
+
+/* ===========================================================================
+ * Compress input to output then close both files.
+ */
+
+void gz_compress(in, out)
+    FILE   *in;
+    gzFile out;
+{
+    local char buf[BUFLEN];
+    int len;
+    int err;
+
+#ifdef USE_MMAP
+    /* Try first compressing with mmap. If mmap fails (minigzip used in a
+     * pipe), use the normal fread loop.
+     */
+    if (gz_compress_mmap(in, out) == Z_OK) return;
+#endif
+    for (;;) {
+        len = (int)fread(buf, 1, sizeof(buf), in);
+        if (ferror(in)) {
+            perror("fread");
+            exit(1);
+        }
+        if (len == 0) break;
+
+        if (gzwrite(out, buf, (unsigned)len) != len) error(gzerror(out, &err));
+    }
+    fclose(in);
+    if (gzclose(out) != Z_OK) error("failed gzclose");
+}
+
+#ifdef USE_MMAP /* MMAP version, Miguel Albrecht <malbrech@eso.org> */
+
+/* Try compressing the input file at once using mmap. Return Z_OK if
+ * if success, Z_ERRNO otherwise.
+ */
+int gz_compress_mmap(in, out)
+    FILE   *in;
+    gzFile out;
+{
+    int len;
+    int err;
+    int ifd = fileno(in);
+    caddr_t buf;    /* mmap'ed buffer for the entire input file */
+    off_t buf_len;  /* length of the input file */
+    struct stat sb;
+
+    /* Determine the size of the file, needed for mmap: */
+    if (fstat(ifd, &sb) < 0) return Z_ERRNO;
+    buf_len = sb.st_size;
+    if (buf_len <= 0) return Z_ERRNO;
+
+    /* Now do the actual mmap: */
+    buf = mmap((caddr_t) 0, buf_len, PROT_READ, MAP_SHARED, ifd, (off_t)0);
+    if (buf == (caddr_t)(-1)) return Z_ERRNO;
+
+    /* Compress the whole file at once: */
+    len = gzwrite(out, (char *)buf, (unsigned)buf_len);
+
+    if (len != (int)buf_len) error(gzerror(out, &err));
+
+    munmap(buf, buf_len);
+    fclose(in);
+    if (gzclose(out) != Z_OK) error("failed gzclose");
+    return Z_OK;
+}
+#endif /* USE_MMAP */
+
+/* ===========================================================================
+ * Uncompress input to output then close both files.
+ */
+void gz_uncompress(in, out)
+    gzFile in;
+    FILE   *out;
+{
+    local char buf[BUFLEN];
+    int len;
+    int err;
+
+    for (;;) {
+        len = gzread(in, buf, sizeof(buf));
+        if (len < 0) error (gzerror(in, &err));
+        if (len == 0) break;
+
+        if ((int)fwrite(buf, 1, (unsigned)len, out) != len) {
+            error("failed fwrite");
+        }
+    }
+    if (fclose(out)) error("failed fclose");
+
+    if (gzclose(in) != Z_OK) error("failed gzclose");
+}
+
+
+/* ===========================================================================
+ * Compress the given file: create a corresponding .gz file and remove the
+ * original.
+ */
+void file_compress(file, mode)
+    char  *file;
+    char  *mode;
+{
+    local char outfile[MAX_NAME_LEN];
+    FILE  *in;
+    gzFile out;
+
+    strcpy(outfile, file);
+    strcat(outfile, GZ_SUFFIX);
+
+    in = fopen(file, "rb");
+    if (in == NULL) {
+        perror(file);
+        exit(1);
+    }
+    out = gzopen(outfile, mode);
+    if (out == NULL) {
+        fprintf(stderr, "%s: can't gzopen %s\n", prog, outfile);
+        exit(1);
+    }
+    gz_compress(in, out);
+
+    unlink(file);
+}
+
+
+/* ===========================================================================
+ * Uncompress the given file and remove the original.
+ */
+void file_uncompress(file)
+    char  *file;
+{
+    local char buf[MAX_NAME_LEN];
+    char *infile, *outfile;
+    FILE  *out;
+    gzFile in;
+    uInt len = (uInt)strlen(file);
+
+    strcpy(buf, file);
+
+    if (len > SUFFIX_LEN && strcmp(file+len-SUFFIX_LEN, GZ_SUFFIX) == 0) {
+        infile = file;
+        outfile = buf;
+        outfile[len-3] = '\0';
+    } else {
+        outfile = file;
+        infile = buf;
+        strcat(infile, GZ_SUFFIX);
+    }
+    in = gzopen(infile, "rb");
+    if (in == NULL) {
+        fprintf(stderr, "%s: can't gzopen %s\n", prog, infile);
+        exit(1);
+    }
+    out = fopen(outfile, "wb");
+    if (out == NULL) {
+        perror(file);
+        exit(1);
+    }
+
+    gz_uncompress(in, out);
+
+    unlink(infile);
+}
+
+
+/* ===========================================================================
+ * Usage:  minigzip [-d] [-f] [-h] [-r] [-1 to -9] [files...]
+ *   -d : decompress
+ *   -f : compress with Z_FILTERED
+ *   -h : compress with Z_HUFFMAN_ONLY
+ *   -r : compress with Z_RLE
+ *   -1 to -9 : compression level
+ */
+
+int main(argc, argv)
+    int argc;
+    char *argv[];
+{
+    int uncompr = 0;
+    gzFile file;
+    char outmode[20];
+
+    strcpy(outmode, "wb6 ");
+
+    prog = argv[0];
+    argc--, argv++;
+
+    while (argc > 0) {
+      if (strcmp(*argv, "-d") == 0)
+        uncompr = 1;
+      else if (strcmp(*argv, "-f") == 0)
+        outmode[3] = 'f';
+      else if (strcmp(*argv, "-h") == 0)
+        outmode[3] = 'h';
+      else if (strcmp(*argv, "-r") == 0)
+        outmode[3] = 'R';
+      else if ((*argv)[0] == '-' && (*argv)[1] >= '1' && (*argv)[1] <= '9' &&
+               (*argv)[2] == 0)
+        outmode[2] = (*argv)[1];
+      else
+        break;
+      argc--, argv++;
+    }
+    if (outmode[3] == ' ')
+        outmode[3] = 0;
+    if (argc == 0) {
+        SET_BINARY_MODE(stdin);
+        SET_BINARY_MODE(stdout);
+        if (uncompr) {
+            file = gzdopen(fileno(stdin), "rb");
+            if (file == NULL) error("can't gzdopen stdin");
+            gz_uncompress(file, stdout);
+        } else {
+            file = gzdopen(fileno(stdout), outmode);
+            if (file == NULL) error("can't gzdopen stdout");
+            gz_compress(stdin, file);
+        }
+    } else {
+        do {
+            if (uncompr) {
+                file_uncompress(*argv);
+            } else {
+                file_compress(*argv, outmode);
+            }
+        } while (argv++, --argc);
+    }
+    return 0;
+}