diff options
111 files changed, 2451 insertions, 3634 deletions
diff --git a/openssl/CHANGES b/openssl/CHANGES index 277b46f17..117ba6d79 100644 --- a/openssl/CHANGES +++ b/openssl/CHANGES @@ -2,6 +2,136 @@ OpenSSL CHANGES _______________ + Changes between 1.0.1j and 1.0.1k [8 Jan 2015] + + *) Fix DTLS segmentation fault in dtls1_get_record. A carefully crafted DTLS + message can cause a segmentation fault in OpenSSL due to a NULL pointer + dereference. This could lead to a Denial Of Service attack. Thanks to + Markus Stenberg of Cisco Systems, Inc. for reporting this issue. + (CVE-2014-3571) + [Steve Henson] + + *) Fix DTLS memory leak in dtls1_buffer_record. A memory leak can occur in the + dtls1_buffer_record function under certain conditions. In particular this + could occur if an attacker sent repeated DTLS records with the same + sequence number but for the next epoch. The memory leak could be exploited + by an attacker in a Denial of Service attack through memory exhaustion. + Thanks to Chris Mueller for reporting this issue. + (CVE-2015-0206) + [Matt Caswell] + + *) Fix issue where no-ssl3 configuration sets method to NULL. When openssl is + built with the no-ssl3 option and a SSL v3 ClientHello is received the ssl + method would be set to NULL which could later result in a NULL pointer + dereference. Thanks to Frank Schmirler for reporting this issue. + (CVE-2014-3569) + [Kurt Roeckx] + + *) Abort handshake if server key exchange message is omitted for ephemeral + ECDH ciphersuites. + + Thanks to Karthikeyan Bhargavan of the PROSECCO team at INRIA for + reporting this issue. + (CVE-2014-3572) + [Steve Henson] + + *) Remove non-export ephemeral RSA code on client and server. This code + violated the TLS standard by allowing the use of temporary RSA keys in + non-export ciphersuites and could be used by a server to effectively + downgrade the RSA key length used to a value smaller than the server + certificate. Thanks for Karthikeyan Bhargavan of the PROSECCO team at + INRIA or reporting this issue. + (CVE-2015-0204) + [Steve Henson] + + *) Fixed issue where DH client certificates are accepted without verification. + An OpenSSL server will accept a DH certificate for client authentication + without the certificate verify message. This effectively allows a client to + authenticate without the use of a private key. This only affects servers + which trust a client certificate authority which issues certificates + containing DH keys: these are extremely rare and hardly ever encountered. + Thanks for Karthikeyan Bhargavan of the PROSECCO team at INRIA or reporting + this issue. + (CVE-2015-0205) + [Steve Henson] + + *) Ensure that the session ID context of an SSL is updated when its + SSL_CTX is updated via SSL_set_SSL_CTX. + + The session ID context is typically set from the parent SSL_CTX, + and can vary with the CTX. + [Adam Langley] + + *) Fix various certificate fingerprint issues. + + By using non-DER or invalid encodings outside the signed portion of a + certificate the fingerprint can be changed without breaking the signature. + Although no details of the signed portion of the certificate can be changed + this can cause problems with some applications: e.g. those using the + certificate fingerprint for blacklists. + + 1. Reject signatures with non zero unused bits. + + If the BIT STRING containing the signature has non zero unused bits reject + the signature. All current signature algorithms require zero unused bits. + + 2. Check certificate algorithm consistency. + + Check the AlgorithmIdentifier inside TBS matches the one in the + certificate signature. NB: this will result in signature failure + errors for some broken certificates. + + Thanks to Konrad Kraszewski from Google for reporting this issue. + + 3. Check DSA/ECDSA signatures use DER. + + Reencode DSA/ECDSA signatures and compare with the original received + signature. Return an error if there is a mismatch. + + This will reject various cases including garbage after signature + (thanks to Antti Karjalainen and Tuomo Untinen from the Codenomicon CROSS + program for discovering this case) and use of BER or invalid ASN.1 INTEGERs + (negative or with leading zeroes). + + Further analysis was conducted and fixes were developed by Stephen Henson + of the OpenSSL core team. + + (CVE-2014-8275) + [Steve Henson] + + *) Correct Bignum squaring. Bignum squaring (BN_sqr) may produce incorrect + results on some platforms, including x86_64. This bug occurs at random + with a very low probability, and is not known to be exploitable in any + way, though its exact impact is difficult to determine. Thanks to Pieter + Wuille (Blockstream) who reported this issue and also suggested an initial + fix. Further analysis was conducted by the OpenSSL development team and + Adam Langley of Google. The final fix was developed by Andy Polyakov of + the OpenSSL core team. + (CVE-2014-3570) + [Andy Polyakov] + + *) Do not resume sessions on the server if the negotiated protocol + version does not match the session's version. Resuming with a different + version, while not strictly forbidden by the RFC, is of questionable + sanity and breaks all known clients. + [David Benjamin, Emilia Käsper] + + *) Tighten handling of the ChangeCipherSpec (CCS) message: reject + early CCS messages during renegotiation. (Note that because + renegotiation is encrypted, this early CCS was not exploitable.) + [Emilia Käsper] + + *) Tighten client-side session ticket handling during renegotiation: + ensure that the client only accepts a session ticket if the server sends + the extension anew in the ServerHello. Previously, a TLS client would + reuse the old extension state and thus accept a session ticket if one was + announced in the initial ServerHello. + + Similarly, ensure that the client requires a session ticket if one + was advertised in the ServerHello. Previously, a TLS client would + ignore a missing NewSessionTicket message. + [Emilia Käsper] + Changes between 1.0.1i and 1.0.1j [15 Oct 2014] *) SRTP Memory Leak. diff --git a/openssl/Configure b/openssl/Configure index 76433b027..a0db7e72b 100755 --- a/openssl/Configure +++ b/openssl/Configure @@ -804,6 +804,11 @@ PROCESS_ARGS: { $disabled{"tls1"} = "option(tls)" } + elsif ($1 eq "ssl3-method") + { + $disabled{"ssl3-method"} = "option(ssl)"; + $disabled{"ssl3"} = "option(ssl)"; + } else { $disabled{$1} = "option"; diff --git a/openssl/Makefile.bak b/openssl/Makefile.bak new file mode 100644 index 000000000..34fd58f46 --- /dev/null +++ b/openssl/Makefile.bak @@ -0,0 +1,686 @@ +### Generated automatically from Makefile.org by Configure. + +## +## Makefile for OpenSSL +## + +VERSION=1.0.1k-dev +MAJOR=1 +MINOR=0.1 +SHLIB_VERSION_NUMBER=1.0.0 +SHLIB_VERSION_HISTORY= +SHLIB_MAJOR=1 +SHLIB_MINOR=0.0 +SHLIB_EXT= +PLATFORM=gcc +OPTIONS= no-ec_nistp_64_gcc_128 no-gmp no-jpake no-krb5 no-md2 no-rc5 no-rfc3779 no-sctp no-shared no-store no-unit-test no-zlib no-zlib-dynamic static-engine +CONFIGURE_ARGS=gcc +SHLIB_TARGET= + +# HERE indicates where this Makefile lives. This can be used to indicate +# where sub-Makefiles are expected to be. Currently has very limited usage, +# and should probably not be bothered with at all. +HERE=. + +# INSTALL_PREFIX is for package builders so that they can configure +# for, say, /usr/ and yet have everything installed to /tmp/somedir/usr/. +# Normally it is left empty. +INSTALL_PREFIX= +INSTALLTOP=/usr/local/ssl + +# Do not edit this manually. Use Configure --openssldir=DIR do change this! +OPENSSLDIR=/usr/local/ssl + +# NO_IDEA - Define to build without the IDEA algorithm +# NO_RC4 - Define to build without the RC4 algorithm +# NO_RC2 - Define to build without the RC2 algorithm +# THREADS - Define when building with threads, you will probably also need any +# system defines as well, i.e. _REENTERANT for Solaris 2.[34] +# TERMIO - Define the termio terminal subsystem, needed if sgtty is missing. +# TERMIOS - Define the termios terminal subsystem, Silicon Graphics. +# LONGCRYPT - Define to use HPUX 10.x's long password modification to crypt(3). +# DEVRANDOM - Give this the value of the 'random device' if your OS supports +# one. 32 bytes will be read from this when the random +# number generator is initalised. +# SSL_FORBID_ENULL - define if you want the server to be not able to use the +# NULL encryption ciphers. +# +# LOCK_DEBUG - turns on lots of lock debug output :-) +# REF_CHECK - turn on some xyz_free() assertions. +# REF_PRINT - prints some stuff on structure free. +# CRYPTO_MDEBUG - turns on my 'memory leak' detecting stuff +# MFUNC - Make all Malloc/Free/Realloc calls call +# CRYPTO_malloc/CRYPTO_free/CRYPTO_realloc which can be setup to +# call application defined callbacks via CRYPTO_set_mem_functions() +# MD5_ASM needs to be defined to use the x86 assembler for MD5 +# SHA1_ASM needs to be defined to use the x86 assembler for SHA1 +# RMD160_ASM needs to be defined to use the x86 assembler for RIPEMD160 +# Do not define B_ENDIAN or L_ENDIAN if 'unsigned long' == 8. It must +# equal 4. +# PKCS1_CHECK - pkcs1 tests. + +CC= gcc +CFLAG= -O3 +DEPFLAG= -DOPENSSL_NO_EC_NISTP_64_GCC_128 -DOPENSSL_NO_GMP -DOPENSSL_NO_JPAKE -DOPENSSL_NO_MD2 -DOPENSSL_NO_RC5 -DOPENSSL_NO_RFC3779 -DOPENSSL_NO_SCTP -DOPENSSL_NO_STORE -DOPENSSL_NO_UNIT_TEST +PEX_LIBS= +EX_LIBS= +EXE_EXT= +ARFLAGS= +AR= ar $(ARFLAGS) r +RANLIB= /usr/bin/ranlib +NM= nm +PERL= /usr/bin/perl +TAR= tar +TARFLAGS= --no-recursion --record-size=10240 +MAKEDEPPROG= gcc +LIBDIR=lib + +# We let the C compiler driver to take care of .s files. This is done in +# order to be excused from maintaining a separate set of architecture +# dependent assembler flags. E.g. if you throw -mcpu=ultrasparc at SPARC +# gcc, then the driver will automatically translate it to -xarch=v8plus +# and pass it down to assembler. +AS=$(CC) -c +ASFLAG=$(CFLAG) + +# For x86 assembler: Set PROCESSOR to 386 if you want to support +# the 80386. +PROCESSOR= + +# CPUID module collects small commonly used assembler snippets +CPUID_OBJ= mem_clr.o +BN_ASM= bn_asm.o +DES_ENC= des_enc.o fcrypt_b.o +AES_ENC= aes_core.o aes_cbc.o +BF_ENC= bf_enc.o +CAST_ENC= c_enc.o +RC4_ENC= rc4_enc.o rc4_skey.o +RC5_ENC= rc5_enc.o +MD5_ASM_OBJ= +SHA1_ASM_OBJ= +RMD160_ASM_OBJ= +WP_ASM_OBJ= wp_block.o +CMLL_ENC= camellia.o cmll_misc.o cmll_cbc.o +MODES_ASM_OBJ= +ENGINES_ASM_OBJ= +PERLASM_SCHEME= + +# KRB5 stuff +KRB5_INCLUDES= +LIBKRB5= + +# Zlib stuff +ZLIB_INCLUDE= +LIBZLIB= + +# TOP level FIPS install directory. +FIPSDIR=/usr/local/ssl/fips-2.0 + +# This is the location of fipscanister.o and friends. +# The FIPS module build will place it $(INSTALLTOP)/lib +# but since $(INSTALLTOP) can only take the default value +# when the module is built it will be in /usr/local/ssl/lib +# $(INSTALLTOP) for this build may be different so hard +# code the path. + +FIPSLIBDIR= + +# The location of the library which contains fipscanister.o +# normally it will be libcrypto unless fipsdso is set in which +# case it will be libfips. If not compiling in FIPS mode at all +# this is empty making it a useful test for a FIPS compile. + +FIPSCANLIB= + +# Shared library base address. Currently only used on Windows. +# + +BASEADDR=0xFB00000 + +DIRS= crypto ssl engines apps test tools +ENGDIRS= ccgost +SHLIBDIRS= crypto ssl + +# dirs in crypto to build +SDIRS= \ + objects \ + md4 md5 sha mdc2 hmac ripemd whrlpool \ + des aes rc2 rc4 idea bf cast camellia seed modes \ + bn ec rsa dsa ecdsa dh ecdh dso engine \ + buffer bio stack lhash rand err \ + evp asn1 pem x509 x509v3 conf txt_db pkcs7 pkcs12 comp ocsp ui krb5 \ + cms pqueue ts srp cmac +# keep in mind that the above list is adjusted by ./Configure +# according to no-xxx arguments... + +# tests to perform. "alltests" is a special word indicating that all tests +# should be performed. +TESTS = alltests + +MAKEFILE= Makefile + +MANDIR=$(OPENSSLDIR)/man +MAN1=1 +MAN3=3 +MANSUFFIX= +HTMLSUFFIX=html +HTMLDIR=$(OPENSSLDIR)/html +SHELL=/bin/sh + +TOP= . +ONEDIRS=out tmp +EDIRS= times doc bugs util include certs ms shlib mt demos perl sf dep VMS +WDIRS= windows +LIBS= libcrypto.a libssl.a +SHARED_CRYPTO=libcrypto$(SHLIB_EXT) +SHARED_SSL=libssl$(SHLIB_EXT) +SHARED_LIBS= +SHARED_LIBS_LINK_EXTS= +SHARED_LDFLAGS= + +GENERAL= Makefile +BASENAME= openssl +NAME= $(BASENAME)-$(VERSION) +TARFILE= $(NAME).tar +WTARFILE= $(NAME)-win.tar +EXHEADER= e_os2.h +HEADER= e_os.h + +all: Makefile build_all openssl.pc libssl.pc libcrypto.pc + +# as we stick to -e, CLEARENV ensures that local variables in lower +# Makefiles remain local and variable. $${VAR+VAR} is tribute to Korn +# shell, which [annoyingly enough] terminates unset with error if VAR +# is not present:-( TOP= && unset TOP is tribute to HP-UX /bin/sh, +# which terminates unset with error if no variable was present:-( +CLEARENV= TOP= && unset TOP $${LIB+LIB} $${LIBS+LIBS} \ + $${INCLUDE+INCLUDE} $${INCLUDES+INCLUDES} \ + $${DIR+DIR} $${DIRS+DIRS} $${SRC+SRC} \ + $${LIBSRC+LIBSRC} $${LIBOBJ+LIBOBJ} $${ALL+ALL} \ + $${EXHEADER+EXHEADER} $${HEADER+HEADER} \ + $${GENERAL+GENERAL} $${CFLAGS+CFLAGS} \ + $${ASFLAGS+ASFLAGS} $${AFLAGS+AFLAGS} \ + $${LDCMD+LDCMD} $${LDFLAGS+LDFLAGS} $${SCRIPTS+SCRIPTS} \ + $${SHAREDCMD+SHAREDCMD} $${SHAREDFLAGS+SHAREDFLAGS} \ + $${SHARED_LIB+SHARED_LIB} $${LIBEXTRAS+LIBEXTRAS} + +BUILDENV= PLATFORM='$(PLATFORM)' PROCESSOR='$(PROCESSOR)' \ + CC='$(CC)' CFLAG='$(CFLAG)' \ + AS='$(CC)' ASFLAG='$(CFLAG) -c' \ + AR='$(AR)' NM='$(NM)' RANLIB='$(RANLIB)' \ + CROSS_COMPILE='$(CROSS_COMPILE)' \ + PERL='$(PERL)' ENGDIRS='$(ENGDIRS)' \ + SDIRS='$(SDIRS)' LIBRPATH='$(INSTALLTOP)/$(LIBDIR)' \ + INSTALL_PREFIX='$(INSTALL_PREFIX)' \ + INSTALLTOP='$(INSTALLTOP)' OPENSSLDIR='$(OPENSSLDIR)' \ + LIBDIR='$(LIBDIR)' \ + MAKEDEPEND='$$$${TOP}/util/domd $$$${TOP} -MD $(MAKEDEPPROG)' \ + DEPFLAG='-DOPENSSL_NO_DEPRECATED $(DEPFLAG)' \ + MAKEDEPPROG='$(MAKEDEPPROG)' \ + SHARED_LDFLAGS='$(SHARED_LDFLAGS)' \ + KRB5_INCLUDES='$(KRB5_INCLUDES)' LIBKRB5='$(LIBKRB5)' \ + ZLIB_INCLUDE='$(ZLIB_INCLUDE)' LIBZLIB='$(LIBZLIB)' \ + EXE_EXT='$(EXE_EXT)' SHARED_LIBS='$(SHARED_LIBS)' \ + SHLIB_EXT='$(SHLIB_EXT)' SHLIB_TARGET='$(SHLIB_TARGET)' \ + PEX_LIBS='$(PEX_LIBS)' EX_LIBS='$(EX_LIBS)' \ + CPUID_OBJ='$(CPUID_OBJ)' \ + BN_ASM='$(BN_ASM)' DES_ENC='$(DES_ENC)' \ + AES_ENC='$(AES_ENC)' CMLL_ENC='$(CMLL_ENC)' \ + BF_ENC='$(BF_ENC)' CAST_ENC='$(CAST_ENC)' \ + RC4_ENC='$(RC4_ENC)' RC5_ENC='$(RC5_ENC)' \ + SHA1_ASM_OBJ='$(SHA1_ASM_OBJ)' \ + MD5_ASM_OBJ='$(MD5_ASM_OBJ)' \ + RMD160_ASM_OBJ='$(RMD160_ASM_OBJ)' \ + WP_ASM_OBJ='$(WP_ASM_OBJ)' \ + MODES_ASM_OBJ='$(MODES_ASM_OBJ)' \ + ENGINES_ASM_OBJ='$(ENGINES_ASM_OBJ)' \ + PERLASM_SCHEME='$(PERLASM_SCHEME)' \ + FIPSLIBDIR='${FIPSLIBDIR}' \ + FIPSDIR='${FIPSDIR}' \ + FIPSCANLIB="$${FIPSCANLIB:-$(FIPSCANLIB)}" \ + THIS=$${THIS:-$@} MAKEFILE=Makefile MAKEOVERRIDES= +# MAKEOVERRIDES= effectively "equalizes" GNU-ish and SysV-ish make flavors, +# which in turn eliminates ambiguities in variable treatment with -e. + +# BUILD_CMD is a generic macro to build a given target in a given +# subdirectory. The target must be given through the shell variable +# `target' and the subdirectory to build in must be given through `dir'. +# This macro shouldn't be used directly, use RECURSIVE_BUILD_CMD or +# BUILD_ONE_CMD instead. +# +# BUILD_ONE_CMD is a macro to build a given target in a given +# subdirectory if that subdirectory is part of $(DIRS). It requires +# exactly the same shell variables as BUILD_CMD. +# +# RECURSIVE_BUILD_CMD is a macro to build a given target in all +# subdirectories defined in $(DIRS). It requires that the target +# is given through the shell variable `target'. +BUILD_CMD= if [ -d "$$dir" ]; then \ + ( cd $$dir && echo "making $$target in $$dir..." && \ + $(CLEARENV) && $(MAKE) -e $(BUILDENV) TOP=.. DIR=$$dir $$target \ + ) || exit 1; \ + fi +RECURSIVE_BUILD_CMD=for dir in $(DIRS); do $(BUILD_CMD); done +BUILD_ONE_CMD=\ + if expr " $(DIRS) " : ".* $$dir " >/dev/null 2>&1; then \ + $(BUILD_CMD); \ + fi + +reflect: + @[ -n "$(THIS)" ] && $(CLEARENV) && $(MAKE) $(THIS) -e $(BUILDENV) + +sub_all: build_all +build_all: build_libs build_apps build_tests build_tools + +build_libs: build_crypto build_ssl build_engines + +build_crypto: + @dir=crypto; target=all; $(BUILD_ONE_CMD) +build_ssl: + @dir=ssl; target=all; $(BUILD_ONE_CMD) +build_engines: + @dir=engines; target=all; $(BUILD_ONE_CMD) +build_apps: + @dir=apps; target=all; $(BUILD_ONE_CMD) +build_tests: + @dir=test; target=all; $(BUILD_ONE_CMD) +build_tools: + @dir=tools; target=all; $(BUILD_ONE_CMD) + +all_testapps: build_libs build_testapps +build_testapps: + @dir=crypto; target=testapps; $(BUILD_ONE_CMD) + +fips_premain_dso$(EXE_EXT): libcrypto.a + [ -z "$(FIPSCANLIB)" ] || $(CC) $(CFLAG) -Iinclude \ + -DFINGERPRINT_PREMAIN_DSO_LOAD -o $@ \ + $(FIPSLIBDIR)fips_premain.c $(FIPSLIBDIR)fipscanister.o \ + libcrypto.a $(EX_LIBS) + +libcrypto$(SHLIB_EXT): libcrypto.a fips_premain_dso$(EXE_EXT) + @if [ "$(SHLIB_TARGET)" != "" ]; then \ + if [ "$(FIPSCANLIB)" = "libcrypto" ]; then \ + FIPSLD_LIBCRYPTO=libcrypto.a ; \ + FIPSLD_CC="$(CC)"; CC=$(FIPSDIR)/bin/fipsld; \ + export CC FIPSLD_CC FIPSLD_LIBCRYPTO; \ + fi; \ + $(MAKE) -e SHLIBDIRS=crypto CC="$${CC:-$(CC)}" build-shared && \ + (touch -c fips_premain_dso$(EXE_EXT) || :); \ + else \ + echo "There's no support for shared libraries on this platform" >&2; \ + exit 1; \ + fi + +libssl$(SHLIB_EXT): libcrypto$(SHLIB_EXT) libssl.a + @if [ "$(SHLIB_TARGET)" != "" ]; then \ + $(MAKE) SHLIBDIRS=ssl SHLIBDEPS='-lcrypto' build-shared; \ + else \ + echo "There's no support for shared libraries on this platform" >&2; \ + exit 1; \ + fi + +clean-shared: + @set -e; for i in $(SHLIBDIRS); do \ + if [ -n "$(SHARED_LIBS_LINK_EXTS)" ]; then \ + tmp="$(SHARED_LIBS_LINK_EXTS)"; \ + for j in $${tmp:-x}; do \ + ( set -x; rm -f lib$$i$$j ); \ + done; \ + fi; \ + ( set -x; rm -f lib$$i$(SHLIB_EXT) ); \ + if [ "$(PLATFORM)" = "Cygwin" ]; then \ + ( set -x; rm -f cyg$$i$(SHLIB_EXT) lib$$i$(SHLIB_EXT).a ); \ + fi; \ + done + +link-shared: + @ set -e; for i in $(SHLIBDIRS); do \ + $(MAKE) -f $(HERE)/Makefile.shared -e $(BUILDENV) \ + LIBNAME=$$i LIBVERSION=$(SHLIB_MAJOR).$(SHLIB_MINOR) \ + LIBCOMPATVERSIONS=";$(SHLIB_VERSION_HISTORY)" \ + symlink.$(SHLIB_TARGET); \ + libs="$$libs -l$$i"; \ + done + +build-shared: do_$(SHLIB_TARGET) link-shared + +do_$(SHLIB_TARGET): + @ set -e; libs='-L. $(SHLIBDEPS)'; for i in $(SHLIBDIRS); do \ + if [ "$$i" = "ssl" -a -n "$(LIBKRB5)" ]; then \ + libs="$(LIBKRB5) $$libs"; \ + fi; \ + $(CLEARENV) && $(MAKE) -f Makefile.shared -e $(BUILDENV) \ + LIBNAME=$$i LIBVERSION=$(SHLIB_MAJOR).$(SHLIB_MINOR) \ + LIBCOMPATVERSIONS=";$(SHLIB_VERSION_HISTORY)" \ + LIBDEPS="$$libs $(EX_LIBS)" \ + link_a.$(SHLIB_TARGET); \ + libs="-l$$i $$libs"; \ + done + +libcrypto.pc: Makefile + @ ( echo 'prefix=$(INSTALLTOP)'; \ + echo 'exec_prefix=$${prefix}'; \ + echo 'libdir=$${exec_prefix}/$(LIBDIR)'; \ + echo 'includedir=$${prefix}/include'; \ + echo ''; \ + echo 'Name: OpenSSL-libcrypto'; \ + echo 'Description: OpenSSL cryptography library'; \ + echo 'Version: '$(VERSION); \ + echo 'Requires: '; \ + echo 'Libs: -L$${libdir} -lcrypto'; \ + echo 'Libs.private: $(EX_LIBS)'; \ + echo 'Cflags: -I$${includedir} $(KRB5_INCLUDES)' ) > libcrypto.pc + +libssl.pc: Makefile + @ ( echo 'prefix=$(INSTALLTOP)'; \ + echo 'exec_prefix=$${prefix}'; \ + echo 'libdir=$${exec_prefix}/$(LIBDIR)'; \ + echo 'includedir=$${prefix}/include'; \ + echo ''; \ + echo 'Name: OpenSSL'; \ + echo 'Description: Secure Sockets Layer and cryptography libraries'; \ + echo 'Version: '$(VERSION); \ + echo 'Requires: '; \ + echo 'Libs: -L$${libdir} -lssl -lcrypto'; \ + echo 'Libs.private: $(EX_LIBS)'; \ + echo 'Cflags: -I$${includedir} $(KRB5_INCLUDES)' ) > libssl.pc + +openssl.pc: Makefile + @ ( echo 'prefix=$(INSTALLTOP)'; \ + echo 'exec_prefix=$${prefix}'; \ + echo 'libdir=$${exec_prefix}/$(LIBDIR)'; \ + echo 'includedir=$${prefix}/include'; \ + echo ''; \ + echo 'Name: OpenSSL'; \ + echo 'Description: Secure Sockets Layer and cryptography libraries and tools'; \ + echo 'Version: '$(VERSION); \ + echo 'Requires: '; \ + echo 'Libs: -L$${libdir} -lssl -lcrypto'; \ + echo 'Libs.private: $(EX_LIBS)'; \ + echo 'Cflags: -I$${includedir} $(KRB5_INCLUDES)' ) > openssl.pc + +Makefile: Makefile.org Configure config + @echo "Makefile is older than Makefile.org, Configure or config." + @echo "Reconfigure the source tree (via './config' or 'perl Configure'), please." + @false + +libclean: + rm -f *.map *.so *.so.* *.dylib *.dll engines/*.so engines/*.dll engines/*.dylib *.a engines/*.a */lib */*/lib + +clean: libclean + rm -f shlib/*.o *.o core a.out fluff rehash.time testlog make.log cctest cctest.c + @set -e; target=clean; $(RECURSIVE_BUILD_CMD) + rm -f $(LIBS) + rm -f openssl.pc libssl.pc libcrypto.pc + rm -f speed.* .pure + rm -f $(TARFILE) + @set -e; for i in $(ONEDIRS) ;\ + do \ + rm -fr $$i/*; \ + done + +makefile.one: files + $(PERL) util/mk1mf.pl >makefile.one; \ + sh util/do_ms.sh + +files: + $(PERL) $(TOP)/util/files.pl Makefile > $(TOP)/MINFO + @set -e; target=files; $(RECURSIVE_BUILD_CMD) + +links: + @$(PERL) $(TOP)/util/mkdir-p.pl include/openssl + @$(PERL) $(TOP)/util/mklink.pl include/openssl $(EXHEADER) + @set -e; target=links; $(RECURSIVE_BUILD_CMD) + +gentests: + @(cd test && echo "generating dummy tests (if needed)..." && \ + $(CLEARENV) && $(MAKE) -e $(BUILDENV) TESTS='$(TESTS)' OPENSSL_DEBUG_MEMORY=on generate ); + +dclean: + rm -rf *.bak include/openssl certs/.0 + @set -e; target=dclean; $(RECURSIVE_BUILD_CMD) + +rehash: rehash.time +rehash.time: certs apps + @if [ -z "$(CROSS_COMPILE)" ]; then \ + (OPENSSL="`pwd`/util/opensslwrap.sh"; \ + [ -x "apps/openssl.exe" ] && OPENSSL="apps/openssl.exe" || :; \ + OPENSSL_DEBUG_MEMORY=on; \ + export OPENSSL OPENSSL_DEBUG_MEMORY; \ + $(PERL) tools/c_rehash certs/demo) && \ + touch rehash.time; \ + else :; fi + +test: tests + +tests: rehash + @(cd test && echo "testing..." && \ + $(CLEARENV) && $(MAKE) -e $(BUILDENV) TOP=.. TESTS='$(TESTS)' OPENSSL_DEBUG_MEMORY=on OPENSSL_CONF=../apps/openssl.cnf tests ); + OPENSSL_CONF=apps/openssl.cnf util/opensslwrap.sh version -a + +report: + @$(PERL) util/selftest.pl + +depend: + @set -e; target=depend; $(RECURSIVE_BUILD_CMD) + +lint: + @set -e; target=lint; $(RECURSIVE_BUILD_CMD) + +tags: + rm -f TAGS + find . -name '[^.]*.[ch]' | xargs etags -a + +errors: + $(PERL) util/ck_errf.pl -strict */*.c */*/*.c + $(PERL) util/mkerr.pl -recurse -write + (cd engines; $(MAKE) PERL=$(PERL) errors) + +stacks: + $(PERL) util/mkstack.pl -write + +util/libeay.num:: + $(PERL) util/mkdef.pl crypto update + +util/ssleay.num:: + $(PERL) util/mkdef.pl ssl update + +crypto/objects/obj_dat.h: crypto/objects/obj_dat.pl crypto/objects/obj_mac.h + $(PERL) crypto/objects/obj_dat.pl crypto/objects/obj_mac.h crypto/objects/obj_dat.h +crypto/objects/obj_mac.h: crypto/objects/objects.pl crypto/objects/objects.txt crypto/objects/obj_mac.num + $(PERL) crypto/objects/objects.pl crypto/objects/objects.txt crypto/objects/obj_mac.num crypto/objects/obj_mac.h +crypto/objects/obj_xref.h: crypto/objects/objxref.pl crypto/objects/obj_xref.txt crypto/objects/obj_mac.num + $(PERL) crypto/objects/objxref.pl crypto/objects/obj_mac.num crypto/objects/obj_xref.txt >crypto/objects/obj_xref.h + +apps/openssl-vms.cnf: apps/openssl.cnf + $(PERL) VMS/VMSify-conf.pl < apps/openssl.cnf > apps/openssl-vms.cnf + +crypto/bn/bn_prime.h: crypto/bn/bn_prime.pl + $(PERL) crypto/bn/bn_prime.pl >crypto/bn/bn_prime.h + + +TABLE: Configure + (echo 'Output of `Configure TABLE'"':"; \ + $(PERL) Configure TABLE) > TABLE + +update: errors stacks util/libeay.num util/ssleay.num crypto/objects/obj_dat.h crypto/objects/obj_xref.h apps/openssl-vms.cnf crypto/bn/bn_prime.h TABLE depend + +# Build distribution tar-file. As the list of files returned by "find" is +# pretty long, on several platforms a "too many arguments" error or similar +# would occur. Therefore the list of files is temporarily stored into a file +# and read directly, requiring GNU-Tar. Call "make TAR=gtar dist" if the normal +# tar does not support the --files-from option. +tar: + find . -type d -print | xargs chmod 755 + find . -type f -print | xargs chmod a+r + find . -type f -perm -0100 -print | xargs chmod a+x + find * \! -path CVS/\* \! -path \*/CVS/\* \! -name CVS \! -name .cvsignore \! -name STATUS \! -name TABLE | sort > ../$(TARFILE).list; \ + $(TAR) $(TARFLAGS) --files-from ../$(TARFILE).list -cvf - | \ + tardy --user_number=0 --user_name=openssl \ + --group_number=0 --group_name=openssl \ + --prefix=openssl-$(VERSION) - |\ + gzip --best >../$(TARFILE).gz; \ + rm -f ../$(TARFILE).list; \ + ls -l ../$(TARFILE).gz + +tar-snap: + @$(TAR) $(TARFLAGS) -cvf - \ + `find * \! -path CVS/\* \! -path \*/CVS/\* \! -name CVS \! -name .cvsignore \! -name STATUS \! -name TABLE \! -name '*.o' \! -name '*.a' \! -name '*.so' \! -name '*.so.*' \! -name 'openssl' \! -name '*test' \! -name '.#*' \! -name '*~' | sort` |\ + tardy --user_number=0 --user_name=openssl \ + --group_number=0 --group_name=openssl \ + --prefix=openssl-$(VERSION) - > ../$(TARFILE);\ + ls -l ../$(TARFILE) + +dist: + $(PERL) Configure dist + @$(MAKE) dist_pem_h + @$(MAKE) SDIRS='$(SDIRS)' clean + @$(MAKE) TAR='$(TAR)' TARFLAGS='$(TARFLAGS)' tar + +dist_pem_h: + (cd crypto/pem; $(MAKE) -e $(BUILDENV) pem.h; $(MAKE) clean) + +install: all install_docs install_sw + +install_sw: + @$(PERL) $(TOP)/util/mkdir-p.pl $(INSTALL_PREFIX)$(INSTALLTOP)/bin \ + $(INSTALL_PREFIX)$(INSTALLTOP)/$(LIBDIR) \ + $(INSTALL_PREFIX)$(INSTALLTOP)/$(LIBDIR)/engines \ + $(INSTALL_PREFIX)$(INSTALLTOP)/$(LIBDIR)/pkgconfig \ + $(INSTALL_PREFIX)$(INSTALLTOP)/include/openssl \ + $(INSTALL_PREFIX)$(OPENSSLDIR)/misc \ + $(INSTALL_PREFIX)$(OPENSSLDIR)/certs \ + $(INSTALL_PREFIX)$(OPENSSLDIR)/private + @set -e; headerlist="$(EXHEADER)"; for i in $$headerlist;\ + do \ + (cp $$i $(INSTALL_PREFIX)$(INSTALLTOP)/include/openssl/$$i; \ + chmod 644 $(INSTALL_PREFIX)$(INSTALLTOP)/include/openssl/$$i ); \ + done; + @set -e; target=install; $(RECURSIVE_BUILD_CMD) + @set -e; liblist="$(LIBS)"; for i in $$liblist ;\ + do \ + if [ -f "$$i" ]; then \ + ( echo installing $$i; \ + cp $$i $(INSTALL_PREFIX)$(INSTALLTOP)/$(LIBDIR)/$$i.new; \ + $(RANLIB) $(INSTALL_PREFIX)$(INSTALLTOP)/$(LIBDIR)/$$i.new; \ + chmod 644 $(INSTALL_PREFIX)$(INSTALLTOP)/$(LIBDIR)/$$i.new; \ + mv -f $(INSTALL_PREFIX)$(INSTALLTOP)/$(LIBDIR)/$$i.new $(INSTALL_PREFIX)$(INSTALLTOP)/$(LIBDIR)/$$i ); \ + fi; \ + done; + @set -e; if [ -n "$(SHARED_LIBS)" ]; then \ + tmp="$(SHARED_LIBS)"; \ + for i in $${tmp:-x}; \ + do \ + if [ -f "$$i" -o -f "$$i.a" ]; then \ + ( echo installing $$i; \ + if [ "$(PLATFORM)" != "Cygwin" ]; then \ + cp $$i $(INSTALL_PREFIX)$(INSTALLTOP)/$(LIBDIR)/$$i.new; \ + chmod 555 $(INSTALL_PREFIX)$(INSTALLTOP)/$(LIBDIR)/$$i.new; \ + mv -f $(INSTALL_PREFIX)$(INSTALLTOP)/$(LIBDIR)/$$i.new $(INSTALL_PREFIX)$(INSTALLTOP)/$(LIBDIR)/$$i; \ + else \ + c=`echo $$i | sed 's/^lib\(.*\)\.dll\.a/cyg\1-$(SHLIB_VERSION_NUMBER).dll/'`; \ + cp $$c $(INSTALL_PREFIX)$(INSTALLTOP)/bin/$$c.new; \ + chmod 755 $(INSTALL_PREFIX)$(INSTALLTOP)/bin/$$c.new; \ + mv -f $(INSTALL_PREFIX)$(INSTALLTOP)/bin/$$c.new $(INSTALL_PREFIX)$(INSTALLTOP)/bin/$$c; \ + cp $$i $(INSTALL_PREFIX)$(INSTALLTOP)/$(LIBDIR)/$$i.new; \ + chmod 644 $(INSTALL_PREFIX)$(INSTALLTOP)/$(LIBDIR)/$$i.new; \ + mv -f $(INSTALL_PREFIX)$(INSTALLTOP)/$(LIBDIR)/$$i.new $(INSTALL_PREFIX)$(INSTALLTOP)/$(LIBDIR)/$$i; \ + fi ); \ + if expr $(PLATFORM) : 'mingw' > /dev/null; then \ + ( case $$i in \ + *crypto*) i=libeay32.dll;; \ + *ssl*) i=ssleay32.dll;; \ + esac; \ + echo installing $$i; \ + cp $$i $(INSTALL_PREFIX)$(INSTALLTOP)/bin/$$i.new; \ + chmod 755 $(INSTALL_PREFIX)$(INSTALLTOP)/bin/$$i.new; \ + mv -f $(INSTALL_PREFIX)$(INSTALLTOP)/bin/$$i.new $(INSTALL_PREFIX)$(INSTALLTOP)/bin/$$i ); \ + fi; \ + fi; \ + done; \ + ( here="`pwd`"; \ + cd $(INSTALL_PREFIX)$(INSTALLTOP)/$(LIBDIR); \ + $(MAKE) -f $$here/Makefile HERE="$$here" link-shared ); \ + if [ "$(INSTALLTOP)" != "/usr" ]; then \ + echo 'OpenSSL shared libraries have been installed in:'; \ + echo ' $(INSTALLTOP)'; \ + echo ''; \ + sed -e '1,/^$$/d' doc/openssl-shared.txt; \ + fi; \ + fi + cp libcrypto.pc $(INSTALL_PREFIX)$(INSTALLTOP)/$(LIBDIR)/pkgconfig + chmod 644 $(INSTALL_PREFIX)$(INSTALLTOP)/$(LIBDIR)/pkgconfig/libcrypto.pc + cp libssl.pc $(INSTALL_PREFIX)$(INSTALLTOP)/$(LIBDIR)/pkgconfig + chmod 644 $(INSTALL_PREFIX)$(INSTALLTOP)/$(LIBDIR)/pkgconfig/libssl.pc + cp openssl.pc $(INSTALL_PREFIX)$(INSTALLTOP)/$(LIBDIR)/pkgconfig + chmod 644 $(INSTALL_PREFIX)$(INSTALLTOP)/$(LIBDIR)/pkgconfig/openssl.pc + +install_html_docs: + here="`pwd`"; \ + for subdir in apps crypto ssl; do \ + mkdir -p $(INSTALL_PREFIX)$(HTMLDIR)/$$subdir; \ + for i in doc/$$subdir/*.pod; do \ + fn=`basename $$i .pod`; \ + echo "installing html/$$fn.$(HTMLSUFFIX)"; \ + cat $$i \ + | sed -r 's/L<([^)]*)(\([0-9]\))?\|([^)]*)(\([0-9]\))?>/L<\1|\3>/g' \ + | pod2html --podroot=doc --htmlroot=.. --podpath=apps:crypto:ssl \ + | sed -r 's/<!DOCTYPE.*//g' \ + > $(INSTALL_PREFIX)$(HTMLDIR)/$$subdir/$$fn.$(HTMLSUFFIX); \ + $(PERL) util/extract-names.pl < $$i | \ + grep -v $$filecase "^$$fn\$$" | \ + (cd $(INSTALL_PREFIX)$(HTMLDIR)/$$subdir; \ + while read n; do \ + PLATFORM=$(PLATFORM) $$here/util/point.sh $$fn.$(HTMLSUFFIX) "$$n".$(HTMLSUFFIX); \ + done); \ + done; \ + done + +install_docs: + @$(PERL) $(TOP)/util/mkdir-p.pl \ + $(INSTALL_PREFIX)$(MANDIR)/man1 \ + $(INSTALL_PREFIX)$(MANDIR)/man3 \ + $(INSTALL_PREFIX)$(MANDIR)/man5 \ + $(INSTALL_PREFIX)$(MANDIR)/man7 + @pod2man="`cd ./util; ./pod2mantest $(PERL)`"; \ + here="`pwd`"; \ + filecase=; \ + if [ "$(PLATFORM)" = "DJGPP" -o "$(PLATFORM)" = "Cygwin" -o "$(PLATFORM)" = "mingw" ]; then \ + filecase=-i; \ + fi; \ + set -e; for i in doc/apps/*.pod; do \ + fn=`basename $$i .pod`; \ + sec=`$(PERL) util/extract-section.pl 1 < $$i`; \ + echo "installing man$$sec/$$fn.$${sec}$(MANSUFFIX)"; \ + (cd `$(PERL) util/dirname.pl $$i`; \ + sh -c "$$pod2man \ + --section=$$sec --center=OpenSSL \ + --release=$(VERSION) `basename $$i`") \ + > $(INSTALL_PREFIX)$(MANDIR)/man$$sec/$$fn.$${sec}$(MANSUFFIX); \ + $(PERL) util/extract-names.pl < $$i | \ + (grep -v $$filecase "^$$fn\$$"; true) | \ + (grep -v "[ ]"; true) | \ + (cd $(INSTALL_PREFIX)$(MANDIR)/man$$sec/; \ + while read n; do \ + PLATFORM=$(PLATFORM) $$here/util/point.sh $$fn.$${sec}$(MANSUFFIX) "$$n".$${sec}$(MANSUFFIX); \ + done); \ + done; \ + set -e; for i in doc/crypto/*.pod doc/ssl/*.pod; do \ + fn=`basename $$i .pod`; \ + sec=`$(PERL) util/extract-section.pl 3 < $$i`; \ + echo "installing man$$sec/$$fn.$${sec}$(MANSUFFIX)"; \ + (cd `$(PERL) util/dirname.pl $$i`; \ + sh -c "$$pod2man \ + --section=$$sec --center=OpenSSL \ + --release=$(VERSION) `basename $$i`") \ + > $(INSTALL_PREFIX)$(MANDIR)/man$$sec/$$fn.$${sec}$(MANSUFFIX); \ + $(PERL) util/extract-names.pl < $$i | \ + (grep -v $$filecase "^$$fn\$$"; true) | \ + (grep -v "[ ]"; true) | \ + (cd $(INSTALL_PREFIX)$(MANDIR)/man$$sec/; \ + while read n; do \ + PLATFORM=$(PLATFORM) $$here/util/point.sh $$fn.$${sec}$(MANSUFFIX) "$$n".$${sec}$(MANSUFFIX); \ + done); \ + done + +# DO NOT DELETE THIS LINE -- make depend depends on it. diff --git a/openssl/NEWS b/openssl/NEWS index 512a667ff..85969135f 100644 --- a/openssl/NEWS +++ b/openssl/NEWS @@ -5,6 +5,17 @@ This file gives a brief overview of the major changes between each OpenSSL release. For more details please read the CHANGES file. + Major changes between OpenSSL 1.0.1j and OpenSSL 1.0.1k [8 Jan 2015] + + o Fix for CVE-2014-3571 + o Fix for CVE-2015-0206 + o Fix for CVE-2014-3569 + o Fix for CVE-2014-3572 + o Fix for CVE-2015-0204 + o Fix for CVE-2015-0205 + o Fix for CVE-2014-8275 + o Fix for CVE-2014-3570 + Major changes between OpenSSL 1.0.1i and OpenSSL 1.0.1j [15 Oct 2014] o Fix for CVE-2014-3513 diff --git a/openssl/README b/openssl/README index cb90c9f40..df2734d3b 100644 --- a/openssl/README +++ b/openssl/README @@ -1,5 +1,5 @@ - OpenSSL 1.0.1j 15 Oct 2014 + OpenSSL 1.0.1k 8 Jan 2015 Copyright (c) 1998-2011 The OpenSSL Project Copyright (c) 1995-1998 Eric A. Young, Tim J. Hudson diff --git a/openssl/apps/ca.c b/openssl/apps/ca.c index 9c25026ac..613f5bee5 100644 --- a/openssl/apps/ca.c +++ b/openssl/apps/ca.c @@ -703,7 +703,7 @@ bad: ERR_clear_error(); #ifdef RL_DEBUG if (!p) - BIO_printf(bio_err, "DEBUG: unique_subject undefined\n", p); + BIO_printf(bio_err, "DEBUG: unique_subject undefined\n"); #endif #ifdef RL_DEBUG BIO_printf(bio_err, "DEBUG: configured unique_subject is %d\n", diff --git a/openssl/apps/dgst.c b/openssl/apps/dgst.c index f4aec779c..e31a6b182 100644 --- a/openssl/apps/dgst.c +++ b/openssl/apps/dgst.c @@ -273,6 +273,8 @@ int MAIN(int argc, char **argv) BIO_printf(bio_err,"-d to output debug info\n"); BIO_printf(bio_err,"-hex output as hex dump\n"); BIO_printf(bio_err,"-binary output in binary form\n"); + BIO_printf(bio_err,"-hmac arg set the HMAC key to arg\n"); + BIO_printf(bio_err,"-non-fips-allow allow use of non FIPS digest\n"); BIO_printf(bio_err,"-sign file sign digest using private key in file\n"); BIO_printf(bio_err,"-verify file verify a signature using public key in file\n"); BIO_printf(bio_err,"-prverify file verify a signature using private key in file\n"); diff --git a/openssl/apps/ocsp.c b/openssl/apps/ocsp.c index 04263ffd9..8883afc95 100644 --- a/openssl/apps/ocsp.c +++ b/openssl/apps/ocsp.c @@ -583,51 +583,52 @@ int MAIN(int argc, char **argv) BIO_printf (bio_err, "OCSP utility\n"); BIO_printf (bio_err, "Usage ocsp [options]\n"); BIO_printf (bio_err, "where options are\n"); - BIO_printf (bio_err, "-out file output filename\n"); - BIO_printf (bio_err, "-issuer file issuer certificate\n"); - BIO_printf (bio_err, "-cert file certificate to check\n"); - BIO_printf (bio_err, "-serial n serial number to check\n"); - BIO_printf (bio_err, "-signer file certificate to sign OCSP request with\n"); - BIO_printf (bio_err, "-signkey file private key to sign OCSP request with\n"); - BIO_printf (bio_err, "-sign_other file additional certificates to include in signed request\n"); - BIO_printf (bio_err, "-no_certs don't include any certificates in signed request\n"); - BIO_printf (bio_err, "-req_text print text form of request\n"); - BIO_printf (bio_err, "-resp_text print text form of response\n"); - BIO_printf (bio_err, "-text print text form of request and response\n"); - BIO_printf (bio_err, "-reqout file write DER encoded OCSP request to \"file\"\n"); - BIO_printf (bio_err, "-respout file write DER encoded OCSP reponse to \"file\"\n"); - BIO_printf (bio_err, "-reqin file read DER encoded OCSP request from \"file\"\n"); - BIO_printf (bio_err, "-respin file read DER encoded OCSP reponse from \"file\"\n"); - BIO_printf (bio_err, "-nonce add OCSP nonce to request\n"); - BIO_printf (bio_err, "-no_nonce don't add OCSP nonce to request\n"); - BIO_printf (bio_err, "-url URL OCSP responder URL\n"); - BIO_printf (bio_err, "-host host:n send OCSP request to host on port n\n"); - BIO_printf (bio_err, "-path path to use in OCSP request\n"); - BIO_printf (bio_err, "-CApath dir trusted certificates directory\n"); - BIO_printf (bio_err, "-CAfile file trusted certificates file\n"); - BIO_printf (bio_err, "-VAfile file validator certificates file\n"); - BIO_printf (bio_err, "-validity_period n maximum validity discrepancy in seconds\n"); - BIO_printf (bio_err, "-status_age n maximum status age in seconds\n"); - BIO_printf (bio_err, "-noverify don't verify response at all\n"); - BIO_printf (bio_err, "-verify_other file additional certificates to search for signer\n"); - BIO_printf (bio_err, "-trust_other don't verify additional certificates\n"); - BIO_printf (bio_err, "-no_intern don't search certificates contained in response for signer\n"); + BIO_printf (bio_err, "-out file output filename\n"); + BIO_printf (bio_err, "-issuer file issuer certificate\n"); + BIO_printf (bio_err, "-cert file certificate to check\n"); + BIO_printf (bio_err, "-serial n serial number to check\n"); + BIO_printf (bio_err, "-signer file certificate to sign OCSP request with\n"); + BIO_printf (bio_err, "-signkey file private key to sign OCSP request with\n"); + BIO_printf (bio_err, "-sign_other file additional certificates to include in signed request\n"); + BIO_printf (bio_err, "-no_certs don't include any certificates in signed request\n"); + BIO_printf (bio_err, "-req_text print text form of request\n"); + BIO_printf (bio_err, "-resp_text print text form of response\n"); + BIO_printf (bio_err, "-text print text form of request and response\n"); + BIO_printf (bio_err, "-reqout file write DER encoded OCSP request to \"file\"\n"); + BIO_printf (bio_err, "-respout file write DER encoded OCSP reponse to \"file\"\n"); + BIO_printf (bio_err, "-reqin file read DER encoded OCSP request from \"file\"\n"); + BIO_printf (bio_err, "-respin file read DER encoded OCSP reponse from \"file\"\n"); + BIO_printf (bio_err, "-nonce add OCSP nonce to request\n"); + BIO_printf (bio_err, "-no_nonce don't add OCSP nonce to request\n"); + BIO_printf (bio_err, "-url URL OCSP responder URL\n"); + BIO_printf (bio_err, "-host host:n send OCSP request to host on port n\n"); + BIO_printf (bio_err, "-path path to use in OCSP request\n"); + BIO_printf (bio_err, "-CApath dir trusted certificates directory\n"); + BIO_printf (bio_err, "-CAfile file trusted certificates file\n"); + BIO_printf (bio_err, "-VAfile file validator certificates file\n"); + BIO_printf (bio_err, "-validity_period n maximum validity discrepancy in seconds\n"); + BIO_printf (bio_err, "-status_age n maximum status age in seconds\n"); + BIO_printf (bio_err, "-noverify don't verify response at all\n"); + BIO_printf (bio_err, "-verify_other file additional certificates to search for signer\n"); + BIO_printf (bio_err, "-trust_other don't verify additional certificates\n"); + BIO_printf (bio_err, "-no_intern don't search certificates contained in response for signer\n"); BIO_printf (bio_err, "-no_signature_verify don't check signature on response\n"); - BIO_printf (bio_err, "-no_cert_verify don't check signing certificate\n"); - BIO_printf (bio_err, "-no_chain don't chain verify response\n"); - BIO_printf (bio_err, "-no_cert_checks don't do additional checks on signing certificate\n"); - BIO_printf (bio_err, "-port num port to run responder on\n"); - BIO_printf (bio_err, "-index file certificate status index file\n"); - BIO_printf (bio_err, "-CA file CA certificate\n"); - BIO_printf (bio_err, "-rsigner file responder certificate to sign responses with\n"); - BIO_printf (bio_err, "-rkey file responder key to sign responses with\n"); - BIO_printf (bio_err, "-rother file other certificates to include in response\n"); - BIO_printf (bio_err, "-resp_no_certs don't include any certificates in response\n"); - BIO_printf (bio_err, "-nmin n number of minutes before next update\n"); - BIO_printf (bio_err, "-ndays n number of days before next update\n"); - BIO_printf (bio_err, "-resp_key_id identify reponse by signing certificate key ID\n"); - BIO_printf (bio_err, "-nrequest n number of requests to accept (default unlimited)\n"); - BIO_printf (bio_err, "-<dgst alg> use specified digest in the request\n"); + BIO_printf (bio_err, "-no_cert_verify don't check signing certificate\n"); + BIO_printf (bio_err, "-no_chain don't chain verify response\n"); + BIO_printf (bio_err, "-no_cert_checks don't do additional checks on signing certificate\n"); + BIO_printf (bio_err, "-port num port to run responder on\n"); + BIO_printf (bio_err, "-index file certificate status index file\n"); + BIO_printf (bio_err, "-CA file CA certificate\n"); + BIO_printf (bio_err, "-rsigner file responder certificate to sign responses with\n"); + BIO_printf (bio_err, "-rkey file responder key to sign responses with\n"); + BIO_printf (bio_err, "-rother file other certificates to include in response\n"); + BIO_printf (bio_err, "-resp_no_certs don't include any certificates in response\n"); + BIO_printf (bio_err, "-nmin n number of minutes before next update\n"); + BIO_printf (bio_err, "-ndays n number of days before next update\n"); + BIO_printf (bio_err, "-resp_key_id identify reponse by signing certificate key ID\n"); + BIO_printf (bio_err, "-nrequest n number of requests to accept (default unlimited)\n"); + BIO_printf (bio_err, "-<dgst alg> use specified digest in the request\n"); + BIO_printf (bio_err, "-timeout n timeout connection to OCSP responder after n seconds\n"); goto end; } @@ -1398,16 +1399,7 @@ OCSP_RESPONSE *process_responder(BIO *err, OCSP_REQUEST *req, if (use_ssl == 1) { BIO *sbio; -#if !defined(OPENSSL_NO_SSL2) && !defined(OPENSSL_NO_SSL3) ctx = SSL_CTX_new(SSLv23_client_method()); -#elif !defined(OPENSSL_NO_SSL3) - ctx = SSL_CTX_new(SSLv3_client_method()); -#elif !defined(OPENSSL_NO_SSL2) - ctx = SSL_CTX_new(SSLv2_client_method()); -#else - BIO_printf(err, "SSL is disabled\n"); - goto end; -#endif if (ctx == NULL) { BIO_printf(err, "Error creating SSL context.\n"); diff --git a/openssl/apps/openssl.c b/openssl/apps/openssl.c index 71e1e48ec..537245945 100644 --- a/openssl/apps/openssl.c +++ b/openssl/apps/openssl.c @@ -435,9 +435,7 @@ end: if (prog != NULL) lh_FUNCTION_free(prog); if (arg.data != NULL) OPENSSL_free(arg.data); - apps_shutdown(); - CRYPTO_mem_leaks(bio_err); if (bio_err != NULL) { BIO_free(bio_err); @@ -450,6 +448,9 @@ end: OPENSSL_free(Argv); } #endif + apps_shutdown(); + CRYPTO_mem_leaks(bio_err); + OPENSSL_EXIT(ret); } diff --git a/openssl/apps/s_client.c b/openssl/apps/s_client.c index c2e160ca7..19545e24b 100644 --- a/openssl/apps/s_client.c +++ b/openssl/apps/s_client.c @@ -329,10 +329,12 @@ static void sc_usage(void) BIO_printf(bio_err," -srppass arg - password for 'user'\n"); BIO_printf(bio_err," -srp_lateuser - SRP username into second ClientHello message\n"); BIO_printf(bio_err," -srp_moregroups - Tolerate other than the known g N values.\n"); - BIO_printf(bio_err," -srp_strength int - minimal mength in bits for N (default %d).\n",SRP_MINIMAL_N); + BIO_printf(bio_err," -srp_strength int - minimal length in bits for N (default %d).\n",SRP_MINIMAL_N); #endif BIO_printf(bio_err," -ssl2 - just use SSLv2\n"); +#ifndef OPENSSL_NO_SSL3_METHOD BIO_printf(bio_err," -ssl3 - just use SSLv3\n"); +#endif BIO_printf(bio_err," -tls1_2 - just use TLSv1.2\n"); BIO_printf(bio_err," -tls1_1 - just use TLSv1.1\n"); BIO_printf(bio_err," -tls1 - just use TLSv1\n"); @@ -807,7 +809,7 @@ int MAIN(int argc, char **argv) else if (strcmp(*argv,"-ssl2") == 0) meth=SSLv2_client_method(); #endif -#ifndef OPENSSL_NO_SSL3 +#ifndef OPENSSL_NO_SSL3_METHOD else if (strcmp(*argv,"-ssl3") == 0) meth=SSLv3_client_method(); #endif @@ -1319,10 +1321,22 @@ re_start: BIO_ctrl(sbio, BIO_CTRL_DGRAM_SET_SEND_TIMEOUT, 0, &timeout); } - if (socket_mtu > 28) + if (socket_mtu) { + if(socket_mtu < DTLS_get_link_min_mtu(con)) + { + BIO_printf(bio_err,"MTU too small. Must be at least %ld\n", + DTLS_get_link_min_mtu(con)); + BIO_free(sbio); + goto shut; + } SSL_set_options(con, SSL_OP_NO_QUERY_MTU); - SSL_set_mtu(con, socket_mtu - 28); + if(!DTLS_set_link_mtu(con, socket_mtu)) + { + BIO_printf(bio_err, "Failed to set MTU\n"); + BIO_free(sbio); + goto shut; + } } else /* want to do MTU discovery */ diff --git a/openssl/apps/s_server.c b/openssl/apps/s_server.c index fe7ad8823..f47328ab3 100644 --- a/openssl/apps/s_server.c +++ b/openssl/apps/s_server.c @@ -515,7 +515,9 @@ static void sv_usage(void) BIO_printf(bio_err," -srpuserseed string - A seed string for a default user salt.\n"); #endif BIO_printf(bio_err," -ssl2 - Just talk SSLv2\n"); +#ifndef OPENSSL_NO_SSL3_METHOD BIO_printf(bio_err," -ssl3 - Just talk SSLv3\n"); +#endif BIO_printf(bio_err," -tls1_2 - Just talk TLSv1.2\n"); BIO_printf(bio_err," -tls1_1 - Just talk TLSv1.1\n"); BIO_printf(bio_err," -tls1 - Just talk TLSv1\n"); @@ -1251,7 +1253,7 @@ int MAIN(int argc, char *argv[]) else if (strcmp(*argv,"-ssl2") == 0) { meth=SSLv2_server_method(); } #endif -#ifndef OPENSSL_NO_SSL3 +#ifndef OPENSSL_NO_SSL3_METHOD else if (strcmp(*argv,"-ssl3") == 0) { meth=SSLv3_server_method(); } #endif @@ -2049,10 +2051,24 @@ static int sv_body(char *hostname, int s, unsigned char *context) BIO_ctrl(sbio, BIO_CTRL_DGRAM_SET_SEND_TIMEOUT, 0, &timeout); } - if (socket_mtu > 28) + if (socket_mtu) { + if(socket_mtu < DTLS_get_link_min_mtu(con)) + { + BIO_printf(bio_err,"MTU too small. Must be at least %ld\n", + DTLS_get_link_min_mtu(con)); + ret = -1; + BIO_free(sbio); + goto err; + } SSL_set_options(con, SSL_OP_NO_QUERY_MTU); - SSL_set_mtu(con, socket_mtu - 28); + if(!DTLS_set_link_mtu(con, socket_mtu)) + { + BIO_printf(bio_err, "Failed to set MTU\n"); + ret = -1; + BIO_free(sbio); + goto err; + } } else /* want to do MTU discovery */ diff --git a/openssl/apps/s_time.c b/openssl/apps/s_time.c index b823c33c5..81dad5324 100644 --- a/openssl/apps/s_time.c +++ b/openssl/apps/s_time.c @@ -349,13 +349,7 @@ int MAIN(int argc, char **argv) if (bio_err == NULL) bio_err=BIO_new_fp(stderr,BIO_NOCLOSE); -#if !defined(OPENSSL_NO_SSL2) && !defined(OPENSSL_NO_SSL3) s_time_meth=SSLv23_client_method(); -#elif !defined(OPENSSL_NO_SSL3) - s_time_meth=SSLv3_client_method(); -#elif !defined(OPENSSL_NO_SSL2) - s_time_meth=SSLv2_client_method(); -#endif /* parse the command line arguments */ if( parseArgs( argc, argv ) < 0 ) diff --git a/openssl/apps/speed.c b/openssl/apps/speed.c index 9886ca376..24d41227b 100644 --- a/openssl/apps/speed.c +++ b/openssl/apps/speed.c @@ -225,7 +225,7 @@ #undef BUFSIZE #define BUFSIZE ((long)1024*8+1) -int run=0; +static volatile int run=0; static int mr=0; static int usertime=1; @@ -2739,27 +2739,6 @@ static int do_multi(int multi) else rsa_results[k][1]=d; } - else if(!strncmp(buf,"+F2:",4)) - { - int k; - double d; - - p=buf+4; - k=atoi(sstrsep(&p,sep)); - sstrsep(&p,sep); - - d=atof(sstrsep(&p,sep)); - if(n) - rsa_results[k][0]=1/(1/rsa_results[k][0]+1/d); - else - rsa_results[k][0]=d; - - d=atof(sstrsep(&p,sep)); - if(n) - rsa_results[k][1]=1/(1/rsa_results[k][1]+1/d); - else - rsa_results[k][1]=d; - } #ifndef OPENSSL_NO_DSA else if(!strncmp(buf,"+F3:",4)) { diff --git a/openssl/crypto/LPdir_win.c b/openssl/crypto/LPdir_win.c index d5b5e2c90..7eea373cd 100644 --- a/openssl/crypto/LPdir_win.c +++ b/openssl/crypto/LPdir_win.c @@ -36,7 +36,7 @@ #if defined(LP_SYS_WINCE) && !defined(FindFirstFile) # define FindFirstFile FindFirstFileW #endif -#if defined(LP_SYS_WINCE) && !defined(FindFirstFile) +#if defined(LP_SYS_WINCE) && !defined(FindNextFile) # define FindNextFile FindNextFileW #endif diff --git a/openssl/crypto/Makefile b/openssl/crypto/Makefile index ee5bfbda8..2b6397a24 100644 --- a/openssl/crypto/Makefile +++ b/openssl/crypto/Makefile @@ -55,12 +55,7 @@ top: all: shared buildinf.h: ../Makefile - ( echo "#ifndef MK1MF_BUILD"; \ - echo ' /* auto-generated by crypto/Makefile for crypto/cversion.c */'; \ - echo ' #define CFLAGS "$(CC) $(CFLAG)"'; \ - echo ' #define PLATFORM "$(PLATFORM)"'; \ - echo " #define DATE \"`LC_ALL=C LC_TIME=C date`\""; \ - echo '#endif' ) >buildinf.h + $(PERL) $(TOP)/util/mkbuildinf.pl "$(CFLAGS)" "$(PLATFORM)" >buildinf.h x86cpuid.s: x86cpuid.pl perlasm/x86asm.pl $(PERL) x86cpuid.pl $(PERLASM_SCHEME) $(CFLAGS) $(PROCESSOR) > $@ diff --git a/openssl/crypto/aes/asm/aes-mips.pl b/openssl/crypto/aes/asm/aes-mips.pl index e52395421..537c8d317 100644 --- a/openssl/crypto/aes/asm/aes-mips.pl +++ b/openssl/crypto/aes/asm/aes-mips.pl @@ -70,7 +70,7 @@ $pf = ($flavour =~ /nubi/i) ? $t0 : $t2; # ###################################################################### -$big_endian=(`echo MIPSEL | $ENV{CC} -E -P -`=~/MIPSEL/)?1:0; +$big_endian=(`echo MIPSEL | $ENV{CC} -E -`=~/MIPSEL/)?1:0 if ($ENV{CC}); for (@ARGV) { $output=$_ if (/^\w[\w\-]*\.\w+$/); } open STDOUT,">$output"; diff --git a/openssl/crypto/asn1/a_bitstr.c b/openssl/crypto/asn1/a_bitstr.c index 34179960b..4117a67dc 100644 --- a/openssl/crypto/asn1/a_bitstr.c +++ b/openssl/crypto/asn1/a_bitstr.c @@ -136,11 +136,16 @@ ASN1_BIT_STRING *c2i_ASN1_BIT_STRING(ASN1_BIT_STRING **a, p= *pp; i= *(p++); + if (i > 7) + { + i=ASN1_R_INVALID_BIT_STRING_BITS_LEFT; + goto err; + } /* We do this to preserve the settings. If we modify * the settings, via the _set_bit function, we will recalculate * on output */ ret->flags&= ~(ASN1_STRING_FLAG_BITS_LEFT|0x07); /* clear */ - ret->flags|=(ASN1_STRING_FLAG_BITS_LEFT|(i&0x07)); /* set */ + ret->flags|=(ASN1_STRING_FLAG_BITS_LEFT|i); /* set */ if (len-- > 1) /* using one because of the bits left byte */ { diff --git a/openssl/crypto/asn1/a_type.c b/openssl/crypto/asn1/a_type.c index a45d2f9d1..5e1bc762d 100644 --- a/openssl/crypto/asn1/a_type.c +++ b/openssl/crypto/asn1/a_type.c @@ -113,7 +113,7 @@ IMPLEMENT_STACK_OF(ASN1_TYPE) IMPLEMENT_ASN1_SET_OF(ASN1_TYPE) /* Returns 0 if they are equal, != 0 otherwise. */ -int ASN1_TYPE_cmp(ASN1_TYPE *a, ASN1_TYPE *b) +int ASN1_TYPE_cmp(const ASN1_TYPE *a, const ASN1_TYPE *b) { int result = -1; diff --git a/openssl/crypto/asn1/a_verify.c b/openssl/crypto/asn1/a_verify.c index fc84cd3d1..78dde1d05 100644 --- a/openssl/crypto/asn1/a_verify.c +++ b/openssl/crypto/asn1/a_verify.c @@ -90,6 +90,12 @@ int ASN1_verify(i2d_of_void *i2d, X509_ALGOR *a, ASN1_BIT_STRING *signature, ASN1err(ASN1_F_ASN1_VERIFY,ASN1_R_UNKNOWN_MESSAGE_DIGEST_ALGORITHM); goto err; } + + if (signature->type == V_ASN1_BIT_STRING && signature->flags & 0x7) + { + ASN1err(ASN1_F_ASN1_VERIFY, ASN1_R_INVALID_BIT_STRING_BITS_LEFT); + goto err; + } inl=i2d(data,NULL); buf_in=OPENSSL_malloc((unsigned int)inl); @@ -146,6 +152,12 @@ int ASN1_item_verify(const ASN1_ITEM *it, X509_ALGOR *a, return -1; } + if (signature->type == V_ASN1_BIT_STRING && signature->flags & 0x7) + { + ASN1err(ASN1_F_ASN1_ITEM_VERIFY, ASN1_R_INVALID_BIT_STRING_BITS_LEFT); + return -1; + } + EVP_MD_CTX_init(&ctx); /* Convert signature OID into digest and public key OIDs */ diff --git a/openssl/crypto/asn1/asn1.h b/openssl/crypto/asn1/asn1.h index 220a0c8c6..3c45d5d03 100644 --- a/openssl/crypto/asn1/asn1.h +++ b/openssl/crypto/asn1/asn1.h @@ -776,7 +776,7 @@ DECLARE_ASN1_FUNCTIONS_fname(ASN1_TYPE, ASN1_ANY, ASN1_TYPE) int ASN1_TYPE_get(ASN1_TYPE *a); void ASN1_TYPE_set(ASN1_TYPE *a, int type, void *value); int ASN1_TYPE_set1(ASN1_TYPE *a, int type, const void *value); -int ASN1_TYPE_cmp(ASN1_TYPE *a, ASN1_TYPE *b); +int ASN1_TYPE_cmp(const ASN1_TYPE *a, const ASN1_TYPE *b); ASN1_OBJECT * ASN1_OBJECT_new(void ); void ASN1_OBJECT_free(ASN1_OBJECT *a); @@ -1329,6 +1329,7 @@ void ERR_load_ASN1_strings(void); #define ASN1_R_ILLEGAL_TIME_VALUE 184 #define ASN1_R_INTEGER_NOT_ASCII_FORMAT 185 #define ASN1_R_INTEGER_TOO_LARGE_FOR_LONG 128 +#define ASN1_R_INVALID_BIT_STRING_BITS_LEFT 220 #define ASN1_R_INVALID_BMPSTRING_LENGTH 129 #define ASN1_R_INVALID_DIGIT 130 #define ASN1_R_INVALID_MIME_TYPE 205 @@ -1378,6 +1379,7 @@ void ERR_load_ASN1_strings(void); #define ASN1_R_TIME_NOT_ASCII_FORMAT 193 #define ASN1_R_TOO_LONG 155 #define ASN1_R_TYPE_NOT_CONSTRUCTED 156 +#define ASN1_R_TYPE_NOT_PRIMITIVE 218 #define ASN1_R_UNABLE_TO_DECODE_RSA_KEY 157 #define ASN1_R_UNABLE_TO_DECODE_RSA_PRIVATE_KEY 158 #define ASN1_R_UNEXPECTED_EOC 159 diff --git a/openssl/crypto/asn1/asn1_err.c b/openssl/crypto/asn1/asn1_err.c index aa60203ba..568a8416b 100644 --- a/openssl/crypto/asn1/asn1_err.c +++ b/openssl/crypto/asn1/asn1_err.c @@ -1,6 +1,6 @@ /* crypto/asn1/asn1_err.c */ /* ==================================================================== - * Copyright (c) 1999-2011 The OpenSSL Project. All rights reserved. + * Copyright (c) 1999-2014 The OpenSSL Project. All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions @@ -246,6 +246,7 @@ static ERR_STRING_DATA ASN1_str_reasons[]= {ERR_REASON(ASN1_R_ILLEGAL_TIME_VALUE) ,"illegal time value"}, {ERR_REASON(ASN1_R_INTEGER_NOT_ASCII_FORMAT),"integer not ascii format"}, {ERR_REASON(ASN1_R_INTEGER_TOO_LARGE_FOR_LONG),"integer too large for long"}, +{ERR_REASON(ASN1_R_INVALID_BIT_STRING_BITS_LEFT),"invalid bit string bits left"}, {ERR_REASON(ASN1_R_INVALID_BMPSTRING_LENGTH),"invalid bmpstring length"}, {ERR_REASON(ASN1_R_INVALID_DIGIT) ,"invalid digit"}, {ERR_REASON(ASN1_R_INVALID_MIME_TYPE) ,"invalid mime type"}, @@ -295,6 +296,7 @@ static ERR_STRING_DATA ASN1_str_reasons[]= {ERR_REASON(ASN1_R_TIME_NOT_ASCII_FORMAT),"time not ascii format"}, {ERR_REASON(ASN1_R_TOO_LONG) ,"too long"}, {ERR_REASON(ASN1_R_TYPE_NOT_CONSTRUCTED) ,"type not constructed"}, +{ERR_REASON(ASN1_R_TYPE_NOT_PRIMITIVE) ,"type not primitive"}, {ERR_REASON(ASN1_R_UNABLE_TO_DECODE_RSA_KEY),"unable to decode rsa key"}, {ERR_REASON(ASN1_R_UNABLE_TO_DECODE_RSA_PRIVATE_KEY),"unable to decode rsa private key"}, {ERR_REASON(ASN1_R_UNEXPECTED_EOC) ,"unexpected eoc"}, diff --git a/openssl/crypto/asn1/tasn_dec.c b/openssl/crypto/asn1/tasn_dec.c index 87d7dfdf5..2cbfa8147 100644 --- a/openssl/crypto/asn1/tasn_dec.c +++ b/openssl/crypto/asn1/tasn_dec.c @@ -870,6 +870,14 @@ static int asn1_d2i_ex_primitive(ASN1_VALUE **pval, } else if (cst) { + if (utype == V_ASN1_NULL || utype == V_ASN1_BOOLEAN + || utype == V_ASN1_OBJECT || utype == V_ASN1_INTEGER + || utype == V_ASN1_ENUMERATED) + { + ASN1err(ASN1_F_ASN1_D2I_EX_PRIMITIVE, + ASN1_R_TYPE_NOT_PRIMITIVE); + return 0; + } buf.length = 0; buf.max = 0; buf.data = NULL; diff --git a/openssl/crypto/asn1/x_algor.c b/openssl/crypto/asn1/x_algor.c index 274e456c7..57cc956c2 100644 --- a/openssl/crypto/asn1/x_algor.c +++ b/openssl/crypto/asn1/x_algor.c @@ -142,3 +142,14 @@ void X509_ALGOR_set_md(X509_ALGOR *alg, const EVP_MD *md) X509_ALGOR_set0(alg, OBJ_nid2obj(EVP_MD_type(md)), param_type, NULL); } + +int X509_ALGOR_cmp(const X509_ALGOR *a, const X509_ALGOR *b) + { + int rv; + rv = OBJ_cmp(a->algorithm, b->algorithm); + if (rv) + return rv; + if (!a->parameter && !b->parameter) + return 0; + return ASN1_TYPE_cmp(a->parameter, b->parameter); + } diff --git a/openssl/crypto/asn1/x_name.c b/openssl/crypto/asn1/x_name.c index d7c231869..22da57040 100644 --- a/openssl/crypto/asn1/x_name.c +++ b/openssl/crypto/asn1/x_name.c @@ -350,6 +350,8 @@ static int x509_name_canon(X509_NAME *a) set = entry->set; } tmpentry = X509_NAME_ENTRY_new(); + if (!tmpentry) + goto err; tmpentry->object = OBJ_dup(entry->object); if (!asn1_string_canon(tmpentry->value, entry->value)) goto err; diff --git a/openssl/crypto/bio/bio.h b/openssl/crypto/bio/bio.h index 05699ab21..32eba7148 100644 --- a/openssl/crypto/bio/bio.h +++ b/openssl/crypto/bio/bio.h @@ -175,6 +175,8 @@ extern "C" { #define BIO_CTRL_DGRAM_SET_NEXT_TIMEOUT 45 /* Next DTLS handshake timeout to * adjust socket timeouts */ +#define BIO_CTRL_DGRAM_GET_MTU_OVERHEAD 49 + #ifndef OPENSSL_NO_SCTP /* SCTP stuff */ #define BIO_CTRL_DGRAM_SCTP_SET_IN_HANDSHAKE 50 @@ -607,6 +609,8 @@ int BIO_ctrl_reset_read_request(BIO *b); (int)BIO_ctrl(b, BIO_CTRL_DGRAM_GET_PEER, 0, (char *)peer) #define BIO_dgram_set_peer(b,peer) \ (int)BIO_ctrl(b, BIO_CTRL_DGRAM_SET_PEER, 0, (char *)peer) +#define BIO_dgram_get_mtu_overhead(b) \ + (unsigned int)BIO_ctrl((b), BIO_CTRL_DGRAM_GET_MTU_OVERHEAD, 0, NULL) /* These two aren't currently implemented */ /* int BIO_get_ex_num(BIO *bio); */ diff --git a/openssl/crypto/bio/bss_dgram.c b/openssl/crypto/bio/bss_dgram.c index d9967e727..0decf9449 100644 --- a/openssl/crypto/bio/bss_dgram.c +++ b/openssl/crypto/bio/bss_dgram.c @@ -454,6 +454,36 @@ static int dgram_write(BIO *b, const char *in, int inl) return(ret); } +static long dgram_get_mtu_overhead(bio_dgram_data *data) + { + long ret; + + switch (data->peer.sa.sa_family) + { + case AF_INET: + /* Assume this is UDP - 20 bytes for IP, 8 bytes for UDP */ + ret = 28; + break; +#if OPENSSL_USE_IPV6 + case AF_INET6: +#ifdef IN6_IS_ADDR_V4MAPPED + if (IN6_IS_ADDR_V4MAPPED(&data->peer.sa_in6.sin6_addr)) + /* Assume this is UDP - 20 bytes for IP, 8 bytes for UDP */ + ret = 28; + else +#endif + /* Assume this is UDP - 40 bytes for IP, 8 bytes for UDP */ + ret = 48; + break; +#endif + default: + /* We don't know. Go with the historical default */ + ret = 28; + break; + } + return ret; + } + static long dgram_ctrl(BIO *b, int cmd, long num, void *ptr) { long ret=1; @@ -630,23 +660,24 @@ static long dgram_ctrl(BIO *b, int cmd, long num, void *ptr) #endif break; case BIO_CTRL_DGRAM_GET_FALLBACK_MTU: + ret = -dgram_get_mtu_overhead(data); switch (data->peer.sa.sa_family) { case AF_INET: - ret = 576 - 20 - 8; + ret += 576; break; #if OPENSSL_USE_IPV6 case AF_INET6: #ifdef IN6_IS_ADDR_V4MAPPED if (IN6_IS_ADDR_V4MAPPED(&data->peer.sa_in6.sin6_addr)) - ret = 576 - 20 - 8; + ret += 576; else #endif - ret = 1280 - 40 - 8; + ret += 1280; break; #endif default: - ret = 576 - 20 - 8; + ret += 576; break; } break; @@ -847,6 +878,9 @@ static long dgram_ctrl(BIO *b, int cmd, long num, void *ptr) ret = 0; break; #endif + case BIO_CTRL_DGRAM_GET_MTU_OVERHEAD: + ret = dgram_get_mtu_overhead(data); + break; default: ret=0; break; @@ -893,10 +927,18 @@ BIO *BIO_new_dgram_sctp(int fd, int close_flag) /* Activate SCTP-AUTH for DATA and FORWARD-TSN chunks */ auth.sauth_chunk = OPENSSL_SCTP_DATA_CHUNK_TYPE; ret = setsockopt(fd, IPPROTO_SCTP, SCTP_AUTH_CHUNK, &auth, sizeof(struct sctp_authchunk)); - OPENSSL_assert(ret >= 0); + if (ret < 0) + { + BIO_vfree(bio); + return(NULL); + } auth.sauth_chunk = OPENSSL_SCTP_FORWARD_CUM_TSN_CHUNK_TYPE; ret = setsockopt(fd, IPPROTO_SCTP, SCTP_AUTH_CHUNK, &auth, sizeof(struct sctp_authchunk)); - OPENSSL_assert(ret >= 0); + if (ret < 0) + { + BIO_vfree(bio); + return(NULL); + } /* Test if activation was successful. When using accept(), * SCTP-AUTH has to be activated for the listening socket @@ -905,7 +947,13 @@ BIO *BIO_new_dgram_sctp(int fd, int close_flag) authchunks = OPENSSL_malloc(sockopt_len); memset(authchunks, 0, sizeof(sockopt_len)); ret = getsockopt(fd, IPPROTO_SCTP, SCTP_LOCAL_AUTH_CHUNKS, authchunks, &sockopt_len); - OPENSSL_assert(ret >= 0); + + if (ret < 0) + { + OPENSSL_free(authchunks); + BIO_vfree(bio); + return(NULL); + } for (p = (unsigned char*) authchunks->gauth_chunks; p < (unsigned char*) authchunks + sockopt_len; @@ -927,16 +975,28 @@ BIO *BIO_new_dgram_sctp(int fd, int close_flag) event.se_type = SCTP_AUTHENTICATION_EVENT; event.se_on = 1; ret = setsockopt(fd, IPPROTO_SCTP, SCTP_EVENT, &event, sizeof(struct sctp_event)); - OPENSSL_assert(ret >= 0); + if (ret < 0) + { + BIO_vfree(bio); + return(NULL); + } #else sockopt_len = (socklen_t) sizeof(struct sctp_event_subscribe); ret = getsockopt(fd, IPPROTO_SCTP, SCTP_EVENTS, &event, &sockopt_len); - OPENSSL_assert(ret >= 0); + if (ret < 0) + { + BIO_vfree(bio); + return(NULL); + } event.sctp_authentication_event = 1; ret = setsockopt(fd, IPPROTO_SCTP, SCTP_EVENTS, &event, sizeof(struct sctp_event_subscribe)); - OPENSSL_assert(ret >= 0); + if (ret < 0) + { + BIO_vfree(bio); + return(NULL); + } #endif #endif @@ -944,7 +1004,11 @@ BIO *BIO_new_dgram_sctp(int fd, int close_flag) * larger than the max record size of 2^14 + 2048 + 13 */ ret = setsockopt(fd, IPPROTO_SCTP, SCTP_PARTIAL_DELIVERY_POINT, &optval, sizeof(optval)); - OPENSSL_assert(ret >= 0); + if (ret < 0) + { + BIO_vfree(bio); + return(NULL); + } return(bio); } @@ -982,7 +1046,12 @@ static int dgram_sctp_free(BIO *a) return 0; data = (bio_dgram_sctp_data *)a->ptr; - if(data != NULL) OPENSSL_free(data); + if(data != NULL) + { + if(data->saved_message.data != NULL) + OPENSSL_free(data->saved_message.data); + OPENSSL_free(data); + } return(1); } @@ -1034,6 +1103,13 @@ static int dgram_sctp_read(BIO *b, char *out, int outl) msg.msg_flags = 0; n = recvmsg(b->num, &msg, 0); + if (n <= 0) + { + if (n < 0) + ret = n; + break; + } + if (msg.msg_controllen > 0) { for (cmsg = CMSG_FIRSTHDR(&msg); cmsg; cmsg = CMSG_NXTHDR(&msg, cmsg)) @@ -1073,13 +1149,6 @@ static int dgram_sctp_read(BIO *b, char *out, int outl) } } - if (n <= 0) - { - if (n < 0) - ret = n; - break; - } - if (msg.msg_flags & MSG_NOTIFICATION) { snp = (union sctp_notification*) out; @@ -1099,6 +1168,7 @@ static int dgram_sctp_read(BIO *b, char *out, int outl) dgram_sctp_write(data->saved_message.bio, data->saved_message.data, data->saved_message.length); OPENSSL_free(data->saved_message.data); + data->saved_message.data = NULL; data->saved_message.length = 0; } @@ -1109,16 +1179,28 @@ static int dgram_sctp_read(BIO *b, char *out, int outl) event.se_type = SCTP_SENDER_DRY_EVENT; event.se_on = 0; i = setsockopt(b->num, IPPROTO_SCTP, SCTP_EVENT, &event, sizeof(struct sctp_event)); - OPENSSL_assert(i >= 0); + if (i < 0) + { + ret = i; + break; + } #else eventsize = sizeof(struct sctp_event_subscribe); i = getsockopt(b->num, IPPROTO_SCTP, SCTP_EVENTS, &event, &eventsize); - OPENSSL_assert(i >= 0); + if (i < 0) + { + ret = i; + break; + } event.sctp_sender_dry_event = 0; i = setsockopt(b->num, IPPROTO_SCTP, SCTP_EVENTS, &event, sizeof(struct sctp_event_subscribe)); - OPENSSL_assert(i >= 0); + if (i < 0) + { + ret = i; + break; + } #endif } @@ -1151,8 +1233,8 @@ static int dgram_sctp_read(BIO *b, char *out, int outl) */ optlen = (socklen_t) sizeof(int); ret = getsockopt(b->num, SOL_SOCKET, SO_RCVBUF, &optval, &optlen); - OPENSSL_assert(ret >= 0); - OPENSSL_assert(optval >= 18445); + if (ret >= 0) + OPENSSL_assert(optval >= 18445); /* Test if SCTP doesn't partially deliver below * max record size (2^14 + 2048 + 13) @@ -1160,8 +1242,8 @@ static int dgram_sctp_read(BIO *b, char *out, int outl) optlen = (socklen_t) sizeof(int); ret = getsockopt(b->num, IPPROTO_SCTP, SCTP_PARTIAL_DELIVERY_POINT, &optval, &optlen); - OPENSSL_assert(ret >= 0); - OPENSSL_assert(optval >= 18445); + if (ret >= 0) + OPENSSL_assert(optval >= 18445); /* Partially delivered notification??? Probably a bug.... */ OPENSSL_assert(!(msg.msg_flags & MSG_NOTIFICATION)); @@ -1195,15 +1277,15 @@ static int dgram_sctp_read(BIO *b, char *out, int outl) authchunks = OPENSSL_malloc(optlen); memset(authchunks, 0, sizeof(optlen)); ii = getsockopt(b->num, IPPROTO_SCTP, SCTP_PEER_AUTH_CHUNKS, authchunks, &optlen); - OPENSSL_assert(ii >= 0); - for (p = (unsigned char*) authchunks->gauth_chunks; - p < (unsigned char*) authchunks + optlen; - p += sizeof(uint8_t)) - { - if (*p == OPENSSL_SCTP_DATA_CHUNK_TYPE) auth_data = 1; - if (*p == OPENSSL_SCTP_FORWARD_CUM_TSN_CHUNK_TYPE) auth_forward = 1; - } + if (ii >= 0) + for (p = (unsigned char*) authchunks->gauth_chunks; + p < (unsigned char*) authchunks + optlen; + p += sizeof(uint8_t)) + { + if (*p == OPENSSL_SCTP_DATA_CHUNK_TYPE) auth_data = 1; + if (*p == OPENSSL_SCTP_FORWARD_CUM_TSN_CHUNK_TYPE) auth_forward = 1; + } OPENSSL_free(authchunks); @@ -1258,9 +1340,11 @@ static int dgram_sctp_write(BIO *b, const char *in, int inl) if (data->save_shutdown && !BIO_dgram_sctp_wait_for_dry(b)) { data->saved_message.bio = b; - data->saved_message.length = inl; + if (data->saved_message.data) + OPENSSL_free(data->saved_message.data); data->saved_message.data = OPENSSL_malloc(inl); memcpy(data->saved_message.data, in, inl); + data->saved_message.length = inl; return inl; } @@ -1367,6 +1451,10 @@ static long dgram_sctp_ctrl(BIO *b, int cmd, long num, void *ptr) * Returns always 1. */ break; + case BIO_CTRL_DGRAM_GET_MTU_OVERHEAD: + /* We allow transport protocol fragmentation so this is irrelevant */ + ret = 0; + break; case BIO_CTRL_DGRAM_SCTP_SET_IN_HANDSHAKE: if (num > 0) data->in_handshake = 1; diff --git a/openssl/crypto/bn/asm/mips.pl b/openssl/crypto/bn/asm/mips.pl index d2f3ef7bb..215c9a748 100644 --- a/openssl/crypto/bn/asm/mips.pl +++ b/openssl/crypto/bn/asm/mips.pl @@ -1872,6 +1872,41 @@ ___ ($a_4,$a_5,$a_6,$a_7)=($b_0,$b_1,$b_2,$b_3); +sub add_c2 () { +my ($hi,$lo,$c0,$c1,$c2, + $warm, # !$warm denotes first call with specific sequence of + # $c_[XYZ] when there is no Z-carry to accumulate yet; + $an,$bn # these two are arguments for multiplication which + # result is used in *next* step [which is why it's + # commented as "forward multiplication" below]; + )=@_; +$code.=<<___; + mflo $lo + mfhi $hi + $ADDU $c0,$lo + sltu $at,$c0,$lo + $MULTU $an,$bn # forward multiplication + $ADDU $c0,$lo + $ADDU $at,$hi + sltu $lo,$c0,$lo + $ADDU $c1,$at + $ADDU $hi,$lo +___ +$code.=<<___ if (!$warm); + sltu $c2,$c1,$at + $ADDU $c1,$hi + sltu $hi,$c1,$hi + $ADDU $c2,$hi +___ +$code.=<<___ if ($warm); + sltu $at,$c1,$at + $ADDU $c1,$hi + $ADDU $c2,$at + sltu $hi,$c1,$hi + $ADDU $c2,$hi +___ +} + $code.=<<___; .align 5 @@ -1920,21 +1955,10 @@ $code.=<<___; sltu $at,$c_2,$t_1 $ADDU $c_3,$t_2,$at $ST $c_2,$BNSZ($a0) - - mflo $t_1 - mfhi $t_2 - slt $c_2,$t_2,$zero - $SLL $t_2,1 - $MULTU $a_1,$a_1 # mul_add_c(a[1],b[1],c3,c1,c2); - slt $a2,$t_1,$zero - $ADDU $t_2,$a2 - $SLL $t_1,1 - $ADDU $c_3,$t_1 - sltu $at,$c_3,$t_1 - $ADDU $t_2,$at - $ADDU $c_1,$t_2 - sltu $at,$c_1,$t_2 - $ADDU $c_2,$at +___ + &add_c2($t_2,$t_1,$c_3,$c_1,$c_2,0, + $a_1,$a_1); # mul_add_c(a[1],b[1],c3,c1,c2); +$code.=<<___; mflo $t_1 mfhi $t_2 $ADDU $c_3,$t_1 @@ -1945,67 +1969,19 @@ $code.=<<___; sltu $at,$c_1,$t_2 $ADDU $c_2,$at $ST $c_3,2*$BNSZ($a0) - - mflo $t_1 - mfhi $t_2 - slt $c_3,$t_2,$zero - $SLL $t_2,1 - $MULTU $a_1,$a_2 # mul_add_c2(a[1],b[2],c1,c2,c3); - slt $a2,$t_1,$zero - $ADDU $t_2,$a2 - $SLL $t_1,1 - $ADDU $c_1,$t_1 - sltu $at,$c_1,$t_1 - $ADDU $t_2,$at - $ADDU $c_2,$t_2 - sltu $at,$c_2,$t_2 - $ADDU $c_3,$at - mflo $t_1 - mfhi $t_2 - slt $at,$t_2,$zero - $ADDU $c_3,$at - $MULTU $a_4,$a_0 # mul_add_c2(a[4],b[0],c2,c3,c1); - $SLL $t_2,1 - slt $a2,$t_1,$zero - $ADDU $t_2,$a2 - $SLL $t_1,1 - $ADDU $c_1,$t_1 - sltu $at,$c_1,$t_1 - $ADDU $t_2,$at - $ADDU $c_2,$t_2 - sltu $at,$c_2,$t_2 - $ADDU $c_3,$at +___ + &add_c2($t_2,$t_1,$c_1,$c_2,$c_3,0, + $a_1,$a_2); # mul_add_c2(a[1],b[2],c1,c2,c3); + &add_c2($t_2,$t_1,$c_1,$c_2,$c_3,1, + $a_4,$a_0); # mul_add_c2(a[4],b[0],c2,c3,c1); +$code.=<<___; $ST $c_1,3*$BNSZ($a0) - - mflo $t_1 - mfhi $t_2 - slt $c_1,$t_2,$zero - $SLL $t_2,1 - $MULTU $a_3,$a_1 # mul_add_c2(a[3],b[1],c2,c3,c1); - slt $a2,$t_1,$zero - $ADDU $t_2,$a2 - $SLL $t_1,1 - $ADDU $c_2,$t_1 - sltu $at,$c_2,$t_1 - $ADDU $t_2,$at - $ADDU $c_3,$t_2 - sltu $at,$c_3,$t_2 - $ADDU $c_1,$at - mflo $t_1 - mfhi $t_2 - slt $at,$t_2,$zero - $ADDU $c_1,$at - $MULTU $a_2,$a_2 # mul_add_c(a[2],b[2],c2,c3,c1); - $SLL $t_2,1 - slt $a2,$t_1,$zero - $ADDU $t_2,$a2 - $SLL $t_1,1 - $ADDU $c_2,$t_1 - sltu $at,$c_2,$t_1 - $ADDU $t_2,$at - $ADDU $c_3,$t_2 - sltu $at,$c_3,$t_2 - $ADDU $c_1,$at +___ + &add_c2($t_2,$t_1,$c_2,$c_3,$c_1,0, + $a_3,$a_1); # mul_add_c2(a[3],b[1],c2,c3,c1); + &add_c2($t_2,$t_1,$c_2,$c_3,$c_1,1, + $a_2,$a_2); # mul_add_c(a[2],b[2],c2,c3,c1); +$code.=<<___; mflo $t_1 mfhi $t_2 $ADDU $c_2,$t_1 @@ -2016,97 +1992,23 @@ $code.=<<___; sltu $at,$c_3,$t_2 $ADDU $c_1,$at $ST $c_2,4*$BNSZ($a0) - - mflo $t_1 - mfhi $t_2 - slt $c_2,$t_2,$zero - $SLL $t_2,1 - $MULTU $a_1,$a_4 # mul_add_c2(a[1],b[4],c3,c1,c2); - slt $a2,$t_1,$zero - $ADDU $t_2,$a2 - $SLL $t_1,1 - $ADDU $c_3,$t_1 - sltu $at,$c_3,$t_1 - $ADDU $t_2,$at - $ADDU $c_1,$t_2 - sltu $at,$c_1,$t_2 - $ADDU $c_2,$at - mflo $t_1 - mfhi $t_2 - slt $at,$t_2,$zero - $ADDU $c_2,$at - $MULTU $a_2,$a_3 # mul_add_c2(a[2],b[3],c3,c1,c2); - $SLL $t_2,1 - slt $a2,$t_1,$zero - $ADDU $t_2,$a2 - $SLL $t_1,1 - $ADDU $c_3,$t_1 - sltu $at,$c_3,$t_1 - $ADDU $t_2,$at - $ADDU $c_1,$t_2 - sltu $at,$c_1,$t_2 - $ADDU $c_2,$at - mflo $t_1 - mfhi $t_2 - slt $at,$t_2,$zero - $MULTU $a_6,$a_0 # mul_add_c2(a[6],b[0],c1,c2,c3); - $ADDU $c_2,$at - $SLL $t_2,1 - slt $a2,$t_1,$zero - $ADDU $t_2,$a2 - $SLL $t_1,1 - $ADDU $c_3,$t_1 - sltu $at,$c_3,$t_1 - $ADDU $t_2,$at - $ADDU $c_1,$t_2 - sltu $at,$c_1,$t_2 - $ADDU $c_2,$at +___ + &add_c2($t_2,$t_1,$c_3,$c_1,$c_2,0, + $a_1,$a_4); # mul_add_c2(a[1],b[4],c3,c1,c2); + &add_c2($t_2,$t_1,$c_3,$c_1,$c_2,1, + $a_2,$a_3); # mul_add_c2(a[2],b[3],c3,c1,c2); + &add_c2($t_2,$t_1,$c_3,$c_1,$c_2,1, + $a_6,$a_0); # mul_add_c2(a[6],b[0],c1,c2,c3); +$code.=<<___; $ST $c_3,5*$BNSZ($a0) - - mflo $t_1 - mfhi $t_2 - slt $c_3,$t_2,$zero - $SLL $t_2,1 - $MULTU $a_5,$a_1 # mul_add_c2(a[5],b[1],c1,c2,c3); - slt $a2,$t_1,$zero - $ADDU $t_2,$a2 - $SLL $t_1,1 - $ADDU $c_1,$t_1 - sltu $at,$c_1,$t_1 - $ADDU $t_2,$at - $ADDU $c_2,$t_2 - sltu $at,$c_2,$t_2 - $ADDU $c_3,$at - mflo $t_1 - mfhi $t_2 - slt $at,$t_2,$zero - $ADDU $c_3,$at - $MULTU $a_4,$a_2 # mul_add_c2(a[4],b[2],c1,c2,c3); - $SLL $t_2,1 - slt $a2,$t_1,$zero - $ADDU $t_2,$a2 - $SLL $t_1,1 - $ADDU $c_1,$t_1 - sltu $at,$c_1,$t_1 - $ADDU $t_2,$at - $ADDU $c_2,$t_2 - sltu $at,$c_2,$t_2 - $ADDU $c_3,$at - mflo $t_1 - mfhi $t_2 - slt $at,$t_2,$zero - $ADDU $c_3,$at - $MULTU $a_3,$a_3 # mul_add_c(a[3],b[3],c1,c2,c3); - $SLL $t_2,1 - slt $a2,$t_1,$zero - $ADDU $t_2,$a2 - $SLL $t_1,1 - $ADDU $c_1,$t_1 - sltu $at,$c_1,$t_1 - $ADDU $t_2,$at - $ADDU $c_2,$t_2 - sltu $at,$c_2,$t_2 - $ADDU $c_3,$at +___ + &add_c2($t_2,$t_1,$c_1,$c_2,$c_3,0, + $a_5,$a_1); # mul_add_c2(a[5],b[1],c1,c2,c3); + &add_c2($t_2,$t_1,$c_1,$c_2,$c_3,1, + $a_4,$a_2); # mul_add_c2(a[4],b[2],c1,c2,c3); + &add_c2($t_2,$t_1,$c_1,$c_2,$c_3,1, + $a_3,$a_3); # mul_add_c(a[3],b[3],c1,c2,c3); +$code.=<<___; mflo $t_1 mfhi $t_2 $ADDU $c_1,$t_1 @@ -2117,112 +2019,25 @@ $code.=<<___; sltu $at,$c_2,$t_2 $ADDU $c_3,$at $ST $c_1,6*$BNSZ($a0) - - mflo $t_1 - mfhi $t_2 - slt $c_1,$t_2,$zero - $SLL $t_2,1 - $MULTU $a_1,$a_6 # mul_add_c2(a[1],b[6],c2,c3,c1); - slt $a2,$t_1,$zero - $ADDU $t_2,$a2 - $SLL $t_1,1 - $ADDU $c_2,$t_1 - sltu $at,$c_2,$t_1 - $ADDU $t_2,$at - $ADDU $c_3,$t_2 - sltu $at,$c_3,$t_2 - $ADDU $c_1,$at - mflo $t_1 - mfhi $t_2 - slt $at,$t_2,$zero - $ADDU $c_1,$at - $MULTU $a_2,$a_5 # mul_add_c2(a[2],b[5],c2,c3,c1); - $SLL $t_2,1 - slt $a2,$t_1,$zero - $ADDU $t_2,$a2 - $SLL $t_1,1 - $ADDU $c_2,$t_1 - sltu $at,$c_2,$t_1 - $ADDU $t_2,$at - $ADDU $c_3,$t_2 - sltu $at,$c_3,$t_2 - $ADDU $c_1,$at - mflo $t_1 - mfhi $t_2 - slt $at,$t_2,$zero - $ADDU $c_1,$at - $MULTU $a_3,$a_4 # mul_add_c2(a[3],b[4],c2,c3,c1); - $SLL $t_2,1 - slt $a2,$t_1,$zero - $ADDU $t_2,$a2 - $SLL $t_1,1 - $ADDU $c_2,$t_1 - sltu $at,$c_2,$t_1 - $ADDU $t_2,$at - $ADDU $c_3,$t_2 - sltu $at,$c_3,$t_2 - $ADDU $c_1,$at - mflo $t_1 - mfhi $t_2 - slt $at,$t_2,$zero - $ADDU $c_1,$at - $MULTU $a_7,$a_1 # mul_add_c2(a[7],b[1],c3,c1,c2); - $SLL $t_2,1 - slt $a2,$t_1,$zero - $ADDU $t_2,$a2 - $SLL $t_1,1 - $ADDU $c_2,$t_1 - sltu $at,$c_2,$t_1 - $ADDU $t_2,$at - $ADDU $c_3,$t_2 - sltu $at,$c_3,$t_2 - $ADDU $c_1,$at +___ + &add_c2($t_2,$t_1,$c_2,$c_3,$c_1,0, + $a_1,$a_6); # mul_add_c2(a[1],b[6],c2,c3,c1); + &add_c2($t_2,$t_1,$c_2,$c_3,$c_1,1, + $a_2,$a_5); # mul_add_c2(a[2],b[5],c2,c3,c1); + &add_c2($t_2,$t_1,$c_2,$c_3,$c_1,1, + $a_3,$a_4); # mul_add_c2(a[3],b[4],c2,c3,c1); + &add_c2($t_2,$t_1,$c_2,$c_3,$c_1,1, + $a_7,$a_1); # mul_add_c2(a[7],b[1],c3,c1,c2); +$code.=<<___; $ST $c_2,7*$BNSZ($a0) - - mflo $t_1 - mfhi $t_2 - slt $c_2,$t_2,$zero - $SLL $t_2,1 - $MULTU $a_6,$a_2 # mul_add_c2(a[6],b[2],c3,c1,c2); - slt $a2,$t_1,$zero - $ADDU $t_2,$a2 - $SLL $t_1,1 - $ADDU $c_3,$t_1 - sltu $at,$c_3,$t_1 - $ADDU $t_2,$at - $ADDU $c_1,$t_2 - sltu $at,$c_1,$t_2 - $ADDU $c_2,$at - mflo $t_1 - mfhi $t_2 - slt $at,$t_2,$zero - $ADDU $c_2,$at - $MULTU $a_5,$a_3 # mul_add_c2(a[5],b[3],c3,c1,c2); - $SLL $t_2,1 - slt $a2,$t_1,$zero - $ADDU $t_2,$a2 - $SLL $t_1,1 - $ADDU $c_3,$t_1 - sltu $at,$c_3,$t_1 - $ADDU $t_2,$at - $ADDU $c_1,$t_2 - sltu $at,$c_1,$t_2 - $ADDU $c_2,$at - mflo $t_1 - mfhi $t_2 - slt $at,$t_2,$zero - $ADDU $c_2,$at - $MULTU $a_4,$a_4 # mul_add_c(a[4],b[4],c3,c1,c2); - $SLL $t_2,1 - slt $a2,$t_1,$zero - $ADDU $t_2,$a2 - $SLL $t_1,1 - $ADDU $c_3,$t_1 - sltu $at,$c_3,$t_1 - $ADDU $t_2,$at - $ADDU $c_1,$t_2 - sltu $at,$c_1,$t_2 - $ADDU $c_2,$at +___ + &add_c2($t_2,$t_1,$c_3,$c_1,$c_2,0, + $a_6,$a_2); # mul_add_c2(a[6],b[2],c3,c1,c2); + &add_c2($t_2,$t_1,$c_3,$c_1,$c_2,1, + $a_5,$a_3); # mul_add_c2(a[5],b[3],c3,c1,c2); + &add_c2($t_2,$t_1,$c_3,$c_1,$c_2,1, + $a_4,$a_4); # mul_add_c(a[4],b[4],c3,c1,c2); +$code.=<<___; mflo $t_1 mfhi $t_2 $ADDU $c_3,$t_1 @@ -2233,82 +2048,21 @@ $code.=<<___; sltu $at,$c_1,$t_2 $ADDU $c_2,$at $ST $c_3,8*$BNSZ($a0) - - mflo $t_1 - mfhi $t_2 - slt $c_3,$t_2,$zero - $SLL $t_2,1 - $MULTU $a_3,$a_6 # mul_add_c2(a[3],b[6],c1,c2,c3); - slt $a2,$t_1,$zero - $ADDU $t_2,$a2 - $SLL $t_1,1 - $ADDU $c_1,$t_1 - sltu $at,$c_1,$t_1 - $ADDU $t_2,$at - $ADDU $c_2,$t_2 - sltu $at,$c_2,$t_2 - $ADDU $c_3,$at - mflo $t_1 - mfhi $t_2 - slt $at,$t_2,$zero - $ADDU $c_3,$at - $MULTU $a_4,$a_5 # mul_add_c2(a[4],b[5],c1,c2,c3); - $SLL $t_2,1 - slt $a2,$t_1,$zero - $ADDU $t_2,$a2 - $SLL $t_1,1 - $ADDU $c_1,$t_1 - sltu $at,$c_1,$t_1 - $ADDU $t_2,$at - $ADDU $c_2,$t_2 - sltu $at,$c_2,$t_2 - $ADDU $c_3,$at - mflo $t_1 - mfhi $t_2 - slt $at,$t_2,$zero - $ADDU $c_3,$at - $MULTU $a_7,$a_3 # mul_add_c2(a[7],b[3],c2,c3,c1); - $SLL $t_2,1 - slt $a2,$t_1,$zero - $ADDU $t_2,$a2 - $SLL $t_1,1 - $ADDU $c_1,$t_1 - sltu $at,$c_1,$t_1 - $ADDU $t_2,$at - $ADDU $c_2,$t_2 - sltu $at,$c_2,$t_2 - $ADDU $c_3,$at +___ + &add_c2($t_2,$t_1,$c_1,$c_2,$c_3,0, + $a_3,$a_6); # mul_add_c2(a[3],b[6],c1,c2,c3); + &add_c2($t_2,$t_1,$c_1,$c_2,$c_3,1, + $a_4,$a_5); # mul_add_c2(a[4],b[5],c1,c2,c3); + &add_c2($t_2,$t_1,$c_1,$c_2,$c_3,1, + $a_7,$a_3); # mul_add_c2(a[7],b[3],c2,c3,c1); +$code.=<<___; $ST $c_1,9*$BNSZ($a0) - - mflo $t_1 - mfhi $t_2 - slt $c_1,$t_2,$zero - $SLL $t_2,1 - $MULTU $a_6,$a_4 # mul_add_c2(a[6],b[4],c2,c3,c1); - slt $a2,$t_1,$zero - $ADDU $t_2,$a2 - $SLL $t_1,1 - $ADDU $c_2,$t_1 - sltu $at,$c_2,$t_1 - $ADDU $t_2,$at - $ADDU $c_3,$t_2 - sltu $at,$c_3,$t_2 - $ADDU $c_1,$at - mflo $t_1 - mfhi $t_2 - slt $at,$t_2,$zero - $ADDU $c_1,$at - $MULTU $a_5,$a_5 # mul_add_c(a[5],b[5],c2,c3,c1); - $SLL $t_2,1 - slt $a2,$t_1,$zero - $ADDU $t_2,$a2 - $SLL $t_1,1 - $ADDU $c_2,$t_1 - sltu $at,$c_2,$t_1 - $ADDU $t_2,$at - $ADDU $c_3,$t_2 - sltu $at,$c_3,$t_2 - $ADDU $c_1,$at +___ + &add_c2($t_2,$t_1,$c_2,$c_3,$c_1,0, + $a_6,$a_4); # mul_add_c2(a[6],b[4],c2,c3,c1); + &add_c2($t_2,$t_1,$c_2,$c_3,$c_1,1, + $a_5,$a_5); # mul_add_c(a[5],b[5],c2,c3,c1); +$code.=<<___; mflo $t_1 mfhi $t_2 $ADDU $c_2,$t_1 @@ -2319,52 +2073,17 @@ $code.=<<___; sltu $at,$c_3,$t_2 $ADDU $c_1,$at $ST $c_2,10*$BNSZ($a0) - - mflo $t_1 - mfhi $t_2 - slt $c_2,$t_2,$zero - $SLL $t_2,1 - $MULTU $a_5,$a_6 # mul_add_c2(a[5],b[6],c3,c1,c2); - slt $a2,$t_1,$zero - $ADDU $t_2,$a2 - $SLL $t_1,1 - $ADDU $c_3,$t_1 - sltu $at,$c_3,$t_1 - $ADDU $t_2,$at - $ADDU $c_1,$t_2 - sltu $at,$c_1,$t_2 - $ADDU $c_2,$at - mflo $t_1 - mfhi $t_2 - slt $at,$t_2,$zero - $ADDU $c_2,$at - $MULTU $a_7,$a_5 # mul_add_c2(a[7],b[5],c1,c2,c3); - $SLL $t_2,1 - slt $a2,$t_1,$zero - $ADDU $t_2,$a2 - $SLL $t_1,1 - $ADDU $c_3,$t_1 - sltu $at,$c_3,$t_1 - $ADDU $t_2,$at - $ADDU $c_1,$t_2 - sltu $at,$c_1,$t_2 - $ADDU $c_2,$at +___ + &add_c2($t_2,$t_1,$c_3,$c_1,$c_2,0, + $a_5,$a_6); # mul_add_c2(a[5],b[6],c3,c1,c2); + &add_c2($t_2,$t_1,$c_3,$c_1,$c_2,1, + $a_7,$a_5); # mul_add_c2(a[7],b[5],c1,c2,c3); +$code.=<<___; $ST $c_3,11*$BNSZ($a0) - - mflo $t_1 - mfhi $t_2 - slt $c_3,$t_2,$zero - $SLL $t_2,1 - $MULTU $a_6,$a_6 # mul_add_c(a[6],b[6],c1,c2,c3); - slt $a2,$t_1,$zero - $ADDU $t_2,$a2 - $SLL $t_1,1 - $ADDU $c_1,$t_1 - sltu $at,$c_1,$t_1 - $ADDU $t_2,$at - $ADDU $c_2,$t_2 - sltu $at,$c_2,$t_2 - $ADDU $c_3,$at +___ + &add_c2($t_2,$t_1,$c_1,$c_2,$c_3,0, + $a_6,$a_6); # mul_add_c(a[6],b[6],c1,c2,c3); +$code.=<<___; mflo $t_1 mfhi $t_2 $ADDU $c_1,$t_1 @@ -2375,21 +2094,10 @@ $code.=<<___; sltu $at,$c_2,$t_2 $ADDU $c_3,$at $ST $c_1,12*$BNSZ($a0) - - mflo $t_1 - mfhi $t_2 - slt $c_1,$t_2,$zero - $SLL $t_2,1 - $MULTU $a_7,$a_7 # mul_add_c(a[7],b[7],c3,c1,c2); - slt $a2,$t_1,$zero - $ADDU $t_2,$a2 - $SLL $t_1,1 - $ADDU $c_2,$t_1 - sltu $at,$c_2,$t_1 - $ADDU $t_2,$at - $ADDU $c_3,$t_2 - sltu $at,$c_3,$t_2 - $ADDU $c_1,$at +___ + &add_c2($t_2,$t_1,$c_2,$c_3,$c_1,0, + $a_7,$a_7); # mul_add_c(a[7],b[7],c3,c1,c2); +$code.=<<___; $ST $c_2,13*$BNSZ($a0) mflo $t_1 @@ -2457,21 +2165,10 @@ $code.=<<___; sltu $at,$c_2,$t_1 $ADDU $c_3,$t_2,$at $ST $c_2,$BNSZ($a0) - - mflo $t_1 - mfhi $t_2 - slt $c_2,$t_2,$zero - $SLL $t_2,1 - $MULTU $a_1,$a_1 # mul_add_c(a[1],b[1],c3,c1,c2); - slt $a2,$t_1,$zero - $ADDU $t_2,$a2 - $SLL $t_1,1 - $ADDU $c_3,$t_1 - sltu $at,$c_3,$t_1 - $ADDU $t_2,$at - $ADDU $c_1,$t_2 - sltu $at,$c_1,$t_2 - $ADDU $c_2,$at +___ + &add_c2($t_2,$t_1,$c_3,$c_1,$c_2,0, + $a_1,$a_1); # mul_add_c(a[1],b[1],c3,c1,c2); +$code.=<<___; mflo $t_1 mfhi $t_2 $ADDU $c_3,$t_1 @@ -2482,52 +2179,17 @@ $code.=<<___; sltu $at,$c_1,$t_2 $ADDU $c_2,$at $ST $c_3,2*$BNSZ($a0) - - mflo $t_1 - mfhi $t_2 - slt $c_3,$t_2,$zero - $SLL $t_2,1 - $MULTU $a_1,$a_2 # mul_add_c(a2[1],b[2],c1,c2,c3); - slt $a2,$t_1,$zero - $ADDU $t_2,$a2 - $SLL $t_1,1 - $ADDU $c_1,$t_1 - sltu $at,$c_1,$t_1 - $ADDU $t_2,$at - $ADDU $c_2,$t_2 - sltu $at,$c_2,$t_2 - $ADDU $c_3,$at - mflo $t_1 - mfhi $t_2 - slt $at,$t_2,$zero - $ADDU $c_3,$at - $MULTU $a_3,$a_1 # mul_add_c2(a[3],b[1],c2,c3,c1); - $SLL $t_2,1 - slt $a2,$t_1,$zero - $ADDU $t_2,$a2 - $SLL $t_1,1 - $ADDU $c_1,$t_1 - sltu $at,$c_1,$t_1 - $ADDU $t_2,$at - $ADDU $c_2,$t_2 - sltu $at,$c_2,$t_2 - $ADDU $c_3,$at +___ + &add_c2($t_2,$t_1,$c_1,$c_2,$c_3,0, + $a_1,$a_2); # mul_add_c2(a2[1],b[2],c1,c2,c3); + &add_c2($t_2,$t_1,$c_1,$c_2,$c_3,1, + $a_3,$a_1); # mul_add_c2(a[3],b[1],c2,c3,c1); +$code.=<<___; $ST $c_1,3*$BNSZ($a0) - - mflo $t_1 - mfhi $t_2 - slt $c_1,$t_2,$zero - $SLL $t_2,1 - $MULTU $a_2,$a_2 # mul_add_c(a[2],b[2],c2,c3,c1); - slt $a2,$t_1,$zero - $ADDU $t_2,$a2 - $SLL $t_1,1 - $ADDU $c_2,$t_1 - sltu $at,$c_2,$t_1 - $ADDU $t_2,$at - $ADDU $c_3,$t_2 - sltu $at,$c_3,$t_2 - $ADDU $c_1,$at +___ + &add_c2($t_2,$t_1,$c_2,$c_3,$c_1,0, + $a_2,$a_2); # mul_add_c(a[2],b[2],c2,c3,c1); +$code.=<<___; mflo $t_1 mfhi $t_2 $ADDU $c_2,$t_1 @@ -2538,21 +2200,10 @@ $code.=<<___; sltu $at,$c_3,$t_2 $ADDU $c_1,$at $ST $c_2,4*$BNSZ($a0) - - mflo $t_1 - mfhi $t_2 - slt $c_2,$t_2,$zero - $SLL $t_2,1 - $MULTU $a_3,$a_3 # mul_add_c(a[3],b[3],c1,c2,c3); - slt $a2,$t_1,$zero - $ADDU $t_2,$a2 - $SLL $t_1,1 - $ADDU $c_3,$t_1 - sltu $at,$c_3,$t_1 - $ADDU $t_2,$at - $ADDU $c_1,$t_2 - sltu $at,$c_1,$t_2 - $ADDU $c_2,$at +___ + &add_c2($t_2,$t_1,$c_3,$c_1,$c_2,0, + $a_3,$a_3); # mul_add_c(a[3],b[3],c1,c2,c3); +$code.=<<___; $ST $c_3,5*$BNSZ($a0) mflo $t_1 diff --git a/openssl/crypto/bn/asm/mips3.s b/openssl/crypto/bn/asm/mips3.s deleted file mode 100644 index dca4105c7..000000000 --- a/openssl/crypto/bn/asm/mips3.s +++ /dev/null @@ -1,2201 +0,0 @@ -.rdata -.asciiz "mips3.s, Version 1.1" -.asciiz "MIPS III/IV ISA artwork by Andy Polyakov <appro@fy.chalmers.se>" - -/* - * ==================================================================== - * Written by Andy Polyakov <appro@fy.chalmers.se> for the OpenSSL - * project. - * - * Rights for redistribution and usage in source and binary forms are - * granted according to the OpenSSL license. Warranty of any kind is - * disclaimed. - * ==================================================================== - */ - -/* - * This is my modest contributon to the OpenSSL project (see - * http://www.openssl.org/ for more information about it) and is - * a drop-in MIPS III/IV ISA replacement for crypto/bn/bn_asm.c - * module. For updates see http://fy.chalmers.se/~appro/hpe/. - * - * The module is designed to work with either of the "new" MIPS ABI(5), - * namely N32 or N64, offered by IRIX 6.x. It's not ment to work under - * IRIX 5.x not only because it doesn't support new ABIs but also - * because 5.x kernels put R4x00 CPU into 32-bit mode and all those - * 64-bit instructions (daddu, dmultu, etc.) found below gonna only - * cause illegal instruction exception:-( - * - * In addition the code depends on preprocessor flags set up by MIPSpro - * compiler driver (either as or cc) and therefore (probably?) can't be - * compiled by the GNU assembler. GNU C driver manages fine though... - * I mean as long as -mmips-as is specified or is the default option, - * because then it simply invokes /usr/bin/as which in turn takes - * perfect care of the preprocessor definitions. Another neat feature - * offered by the MIPSpro assembler is an optimization pass. This gave - * me the opportunity to have the code looking more regular as all those - * architecture dependent instruction rescheduling details were left to - * the assembler. Cool, huh? - * - * Performance improvement is astonishing! 'apps/openssl speed rsa dsa' - * goes way over 3 times faster! - * - * <appro@fy.chalmers.se> - */ -#include <asm.h> -#include <regdef.h> - -#if _MIPS_ISA>=4 -#define MOVNZ(cond,dst,src) \ - movn dst,src,cond -#else -#define MOVNZ(cond,dst,src) \ - .set noreorder; \ - bnezl cond,.+8; \ - move dst,src; \ - .set reorder -#endif - -.text - -.set noat -.set reorder - -#define MINUS4 v1 - -.align 5 -LEAF(bn_mul_add_words) - .set noreorder - bgtzl a2,.L_bn_mul_add_words_proceed - ld t0,0(a1) - jr ra - move v0,zero - .set reorder - -.L_bn_mul_add_words_proceed: - li MINUS4,-4 - and ta0,a2,MINUS4 - move v0,zero - beqz ta0,.L_bn_mul_add_words_tail - -.L_bn_mul_add_words_loop: - dmultu t0,a3 - ld t1,0(a0) - ld t2,8(a1) - ld t3,8(a0) - ld ta0,16(a1) - ld ta1,16(a0) - daddu t1,v0 - sltu v0,t1,v0 /* All manuals say it "compares 32-bit - * values", but it seems to work fine - * even on 64-bit registers. */ - mflo AT - mfhi t0 - daddu t1,AT - daddu v0,t0 - sltu AT,t1,AT - sd t1,0(a0) - daddu v0,AT - - dmultu t2,a3 - ld ta2,24(a1) - ld ta3,24(a0) - daddu t3,v0 - sltu v0,t3,v0 - mflo AT - mfhi t2 - daddu t3,AT - daddu v0,t2 - sltu AT,t3,AT - sd t3,8(a0) - daddu v0,AT - - dmultu ta0,a3 - subu a2,4 - PTR_ADD a0,32 - PTR_ADD a1,32 - daddu ta1,v0 - sltu v0,ta1,v0 - mflo AT - mfhi ta0 - daddu ta1,AT - daddu v0,ta0 - sltu AT,ta1,AT - sd ta1,-16(a0) - daddu v0,AT - - - dmultu ta2,a3 - and ta0,a2,MINUS4 - daddu ta3,v0 - sltu v0,ta3,v0 - mflo AT - mfhi ta2 - daddu ta3,AT - daddu v0,ta2 - sltu AT,ta3,AT - sd ta3,-8(a0) - daddu v0,AT - .set noreorder - bgtzl ta0,.L_bn_mul_add_words_loop - ld t0,0(a1) - - bnezl a2,.L_bn_mul_add_words_tail - ld t0,0(a1) - .set reorder - -.L_bn_mul_add_words_return: - jr ra - -.L_bn_mul_add_words_tail: - dmultu t0,a3 - ld t1,0(a0) - subu a2,1 - daddu t1,v0 - sltu v0,t1,v0 - mflo AT - mfhi t0 - daddu t1,AT - daddu v0,t0 - sltu AT,t1,AT - sd t1,0(a0) - daddu v0,AT - beqz a2,.L_bn_mul_add_words_return - - ld t0,8(a1) - dmultu t0,a3 - ld t1,8(a0) - subu a2,1 - daddu t1,v0 - sltu v0,t1,v0 - mflo AT - mfhi t0 - daddu t1,AT - daddu v0,t0 - sltu AT,t1,AT - sd t1,8(a0) - daddu v0,AT - beqz a2,.L_bn_mul_add_words_return - - ld t0,16(a1) - dmultu t0,a3 - ld t1,16(a0) - daddu t1,v0 - sltu v0,t1,v0 - mflo AT - mfhi t0 - daddu t1,AT - daddu v0,t0 - sltu AT,t1,AT - sd t1,16(a0) - daddu v0,AT - jr ra -END(bn_mul_add_words) - -.align 5 -LEAF(bn_mul_words) - .set noreorder - bgtzl a2,.L_bn_mul_words_proceed - ld t0,0(a1) - jr ra - move v0,zero - .set reorder - -.L_bn_mul_words_proceed: - li MINUS4,-4 - and ta0,a2,MINUS4 - move v0,zero - beqz ta0,.L_bn_mul_words_tail - -.L_bn_mul_words_loop: - dmultu t0,a3 - ld t2,8(a1) - ld ta0,16(a1) - ld ta2,24(a1) - mflo AT - mfhi t0 - daddu v0,AT - sltu t1,v0,AT - sd v0,0(a0) - daddu v0,t1,t0 - - dmultu t2,a3 - subu a2,4 - PTR_ADD a0,32 - PTR_ADD a1,32 - mflo AT - mfhi t2 - daddu v0,AT - sltu t3,v0,AT - sd v0,-24(a0) - daddu v0,t3,t2 - - dmultu ta0,a3 - mflo AT - mfhi ta0 - daddu v0,AT - sltu ta1,v0,AT - sd v0,-16(a0) - daddu v0,ta1,ta0 - - - dmultu ta2,a3 - and ta0,a2,MINUS4 - mflo AT - mfhi ta2 - daddu v0,AT - sltu ta3,v0,AT - sd v0,-8(a0) - daddu v0,ta3,ta2 - .set noreorder - bgtzl ta0,.L_bn_mul_words_loop - ld t0,0(a1) - - bnezl a2,.L_bn_mul_words_tail - ld t0,0(a1) - .set reorder - -.L_bn_mul_words_return: - jr ra - -.L_bn_mul_words_tail: - dmultu t0,a3 - subu a2,1 - mflo AT - mfhi t0 - daddu v0,AT - sltu t1,v0,AT - sd v0,0(a0) - daddu v0,t1,t0 - beqz a2,.L_bn_mul_words_return - - ld t0,8(a1) - dmultu t0,a3 - subu a2,1 - mflo AT - mfhi t0 - daddu v0,AT - sltu t1,v0,AT - sd v0,8(a0) - daddu v0,t1,t0 - beqz a2,.L_bn_mul_words_return - - ld t0,16(a1) - dmultu t0,a3 - mflo AT - mfhi t0 - daddu v0,AT - sltu t1,v0,AT - sd v0,16(a0) - daddu v0,t1,t0 - jr ra -END(bn_mul_words) - -.align 5 -LEAF(bn_sqr_words) - .set noreorder - bgtzl a2,.L_bn_sqr_words_proceed - ld t0,0(a1) - jr ra - move v0,zero - .set reorder - -.L_bn_sqr_words_proceed: - li MINUS4,-4 - and ta0,a2,MINUS4 - move v0,zero - beqz ta0,.L_bn_sqr_words_tail - -.L_bn_sqr_words_loop: - dmultu t0,t0 - ld t2,8(a1) - ld ta0,16(a1) - ld ta2,24(a1) - mflo t1 - mfhi t0 - sd t1,0(a0) - sd t0,8(a0) - - dmultu t2,t2 - subu a2,4 - PTR_ADD a0,64 - PTR_ADD a1,32 - mflo t3 - mfhi t2 - sd t3,-48(a0) - sd t2,-40(a0) - - dmultu ta0,ta0 - mflo ta1 - mfhi ta0 - sd ta1,-32(a0) - sd ta0,-24(a0) - - - dmultu ta2,ta2 - and ta0,a2,MINUS4 - mflo ta3 - mfhi ta2 - sd ta3,-16(a0) - sd ta2,-8(a0) - - .set noreorder - bgtzl ta0,.L_bn_sqr_words_loop - ld t0,0(a1) - - bnezl a2,.L_bn_sqr_words_tail - ld t0,0(a1) - .set reorder - -.L_bn_sqr_words_return: - move v0,zero - jr ra - -.L_bn_sqr_words_tail: - dmultu t0,t0 - subu a2,1 - mflo t1 - mfhi t0 - sd t1,0(a0) - sd t0,8(a0) - beqz a2,.L_bn_sqr_words_return - - ld t0,8(a1) - dmultu t0,t0 - subu a2,1 - mflo t1 - mfhi t0 - sd t1,16(a0) - sd t0,24(a0) - beqz a2,.L_bn_sqr_words_return - - ld t0,16(a1) - dmultu t0,t0 - mflo t1 - mfhi t0 - sd t1,32(a0) - sd t0,40(a0) - jr ra -END(bn_sqr_words) - -.align 5 -LEAF(bn_add_words) - .set noreorder - bgtzl a3,.L_bn_add_words_proceed - ld t0,0(a1) - jr ra - move v0,zero - .set reorder - -.L_bn_add_words_proceed: - li MINUS4,-4 - and AT,a3,MINUS4 - move v0,zero - beqz AT,.L_bn_add_words_tail - -.L_bn_add_words_loop: - ld ta0,0(a2) - subu a3,4 - ld t1,8(a1) - and AT,a3,MINUS4 - ld t2,16(a1) - PTR_ADD a2,32 - ld t3,24(a1) - PTR_ADD a0,32 - ld ta1,-24(a2) - PTR_ADD a1,32 - ld ta2,-16(a2) - ld ta3,-8(a2) - daddu ta0,t0 - sltu t8,ta0,t0 - daddu t0,ta0,v0 - sltu v0,t0,ta0 - sd t0,-32(a0) - daddu v0,t8 - - daddu ta1,t1 - sltu t9,ta1,t1 - daddu t1,ta1,v0 - sltu v0,t1,ta1 - sd t1,-24(a0) - daddu v0,t9 - - daddu ta2,t2 - sltu t8,ta2,t2 - daddu t2,ta2,v0 - sltu v0,t2,ta2 - sd t2,-16(a0) - daddu v0,t8 - - daddu ta3,t3 - sltu t9,ta3,t3 - daddu t3,ta3,v0 - sltu v0,t3,ta3 - sd t3,-8(a0) - daddu v0,t9 - - .set noreorder - bgtzl AT,.L_bn_add_words_loop - ld t0,0(a1) - - bnezl a3,.L_bn_add_words_tail - ld t0,0(a1) - .set reorder - -.L_bn_add_words_return: - jr ra - -.L_bn_add_words_tail: - ld ta0,0(a2) - daddu ta0,t0 - subu a3,1 - sltu t8,ta0,t0 - daddu t0,ta0,v0 - sltu v0,t0,ta0 - sd t0,0(a0) - daddu v0,t8 - beqz a3,.L_bn_add_words_return - - ld t1,8(a1) - ld ta1,8(a2) - daddu ta1,t1 - subu a3,1 - sltu t9,ta1,t1 - daddu t1,ta1,v0 - sltu v0,t1,ta1 - sd t1,8(a0) - daddu v0,t9 - beqz a3,.L_bn_add_words_return - - ld t2,16(a1) - ld ta2,16(a2) - daddu ta2,t2 - sltu t8,ta2,t2 - daddu t2,ta2,v0 - sltu v0,t2,ta2 - sd t2,16(a0) - daddu v0,t8 - jr ra -END(bn_add_words) - -.align 5 -LEAF(bn_sub_words) - .set noreorder - bgtzl a3,.L_bn_sub_words_proceed - ld t0,0(a1) - jr ra - move v0,zero - .set reorder - -.L_bn_sub_words_proceed: - li MINUS4,-4 - and AT,a3,MINUS4 - move v0,zero - beqz AT,.L_bn_sub_words_tail - -.L_bn_sub_words_loop: - ld ta0,0(a2) - subu a3,4 - ld t1,8(a1) - and AT,a3,MINUS4 - ld t2,16(a1) - PTR_ADD a2,32 - ld t3,24(a1) - PTR_ADD a0,32 - ld ta1,-24(a2) - PTR_ADD a1,32 - ld ta2,-16(a2) - ld ta3,-8(a2) - sltu t8,t0,ta0 - dsubu t0,ta0 - dsubu ta0,t0,v0 - sd ta0,-32(a0) - MOVNZ (t0,v0,t8) - - sltu t9,t1,ta1 - dsubu t1,ta1 - dsubu ta1,t1,v0 - sd ta1,-24(a0) - MOVNZ (t1,v0,t9) - - - sltu t8,t2,ta2 - dsubu t2,ta2 - dsubu ta2,t2,v0 - sd ta2,-16(a0) - MOVNZ (t2,v0,t8) - - sltu t9,t3,ta3 - dsubu t3,ta3 - dsubu ta3,t3,v0 - sd ta3,-8(a0) - MOVNZ (t3,v0,t9) - - .set noreorder - bgtzl AT,.L_bn_sub_words_loop - ld t0,0(a1) - - bnezl a3,.L_bn_sub_words_tail - ld t0,0(a1) - .set reorder - -.L_bn_sub_words_return: - jr ra - -.L_bn_sub_words_tail: - ld ta0,0(a2) - subu a3,1 - sltu t8,t0,ta0 - dsubu t0,ta0 - dsubu ta0,t0,v0 - MOVNZ (t0,v0,t8) - sd ta0,0(a0) - beqz a3,.L_bn_sub_words_return - - ld t1,8(a1) - subu a3,1 - ld ta1,8(a2) - sltu t9,t1,ta1 - dsubu t1,ta1 - dsubu ta1,t1,v0 - MOVNZ (t1,v0,t9) - sd ta1,8(a0) - beqz a3,.L_bn_sub_words_return - - ld t2,16(a1) - ld ta2,16(a2) - sltu t8,t2,ta2 - dsubu t2,ta2 - dsubu ta2,t2,v0 - MOVNZ (t2,v0,t8) - sd ta2,16(a0) - jr ra -END(bn_sub_words) - -#undef MINUS4 - -.align 5 -LEAF(bn_div_3_words) - .set reorder - move a3,a0 /* we know that bn_div_words doesn't - * touch a3, ta2, ta3 and preserves a2 - * so that we can save two arguments - * and return address in registers - * instead of stack:-) - */ - ld a0,(a3) - move ta2,a1 - ld a1,-8(a3) - bne a0,a2,.L_bn_div_3_words_proceed - li v0,-1 - jr ra -.L_bn_div_3_words_proceed: - move ta3,ra - bal bn_div_words - move ra,ta3 - dmultu ta2,v0 - ld t2,-16(a3) - move ta0,zero - mfhi t1 - mflo t0 - sltu t8,t1,v1 -.L_bn_div_3_words_inner_loop: - bnez t8,.L_bn_div_3_words_inner_loop_done - sgeu AT,t2,t0 - seq t9,t1,v1 - and AT,t9 - sltu t3,t0,ta2 - daddu v1,a2 - dsubu t1,t3 - dsubu t0,ta2 - sltu t8,t1,v1 - sltu ta0,v1,a2 - or t8,ta0 - .set noreorder - beqzl AT,.L_bn_div_3_words_inner_loop - dsubu v0,1 - .set reorder -.L_bn_div_3_words_inner_loop_done: - jr ra -END(bn_div_3_words) - -.align 5 -LEAF(bn_div_words) - .set noreorder - bnezl a2,.L_bn_div_words_proceed - move v1,zero - jr ra - li v0,-1 /* I'd rather signal div-by-zero - * which can be done with 'break 7' */ - -.L_bn_div_words_proceed: - bltz a2,.L_bn_div_words_body - move t9,v1 - dsll a2,1 - bgtz a2,.-4 - addu t9,1 - - .set reorder - negu t1,t9 - li t2,-1 - dsll t2,t1 - and t2,a0 - dsrl AT,a1,t1 - .set noreorder - bnezl t2,.+8 - break 6 /* signal overflow */ - .set reorder - dsll a0,t9 - dsll a1,t9 - or a0,AT - -#define QT ta0 -#define HH ta1 -#define DH v1 -.L_bn_div_words_body: - dsrl DH,a2,32 - sgeu AT,a0,a2 - .set noreorder - bnezl AT,.+8 - dsubu a0,a2 - .set reorder - - li QT,-1 - dsrl HH,a0,32 - dsrl QT,32 /* q=0xffffffff */ - beq DH,HH,.L_bn_div_words_skip_div1 - ddivu zero,a0,DH - mflo QT -.L_bn_div_words_skip_div1: - dmultu a2,QT - dsll t3,a0,32 - dsrl AT,a1,32 - or t3,AT - mflo t0 - mfhi t1 -.L_bn_div_words_inner_loop1: - sltu t2,t3,t0 - seq t8,HH,t1 - sltu AT,HH,t1 - and t2,t8 - sltu v0,t0,a2 - or AT,t2 - .set noreorder - beqz AT,.L_bn_div_words_inner_loop1_done - dsubu t1,v0 - dsubu t0,a2 - b .L_bn_div_words_inner_loop1 - dsubu QT,1 - .set reorder -.L_bn_div_words_inner_loop1_done: - - dsll a1,32 - dsubu a0,t3,t0 - dsll v0,QT,32 - - li QT,-1 - dsrl HH,a0,32 - dsrl QT,32 /* q=0xffffffff */ - beq DH,HH,.L_bn_div_words_skip_div2 - ddivu zero,a0,DH - mflo QT -.L_bn_div_words_skip_div2: -#undef DH - dmultu a2,QT - dsll t3,a0,32 - dsrl AT,a1,32 - or t3,AT - mflo t0 - mfhi t1 -.L_bn_div_words_inner_loop2: - sltu t2,t3,t0 - seq t8,HH,t1 - sltu AT,HH,t1 - and t2,t8 - sltu v1,t0,a2 - or AT,t2 - .set noreorder - beqz AT,.L_bn_div_words_inner_loop2_done - dsubu t1,v1 - dsubu t0,a2 - b .L_bn_div_words_inner_loop2 - dsubu QT,1 - .set reorder -.L_bn_div_words_inner_loop2_done: -#undef HH - - dsubu a0,t3,t0 - or v0,QT - dsrl v1,a0,t9 /* v1 contains remainder if anybody wants it */ - dsrl a2,t9 /* restore a2 */ - jr ra -#undef QT -END(bn_div_words) - -#define a_0 t0 -#define a_1 t1 -#define a_2 t2 -#define a_3 t3 -#define b_0 ta0 -#define b_1 ta1 -#define b_2 ta2 -#define b_3 ta3 - -#define a_4 s0 -#define a_5 s2 -#define a_6 s4 -#define a_7 a1 /* once we load a[7] we don't need a anymore */ -#define b_4 s1 -#define b_5 s3 -#define b_6 s5 -#define b_7 a2 /* once we load b[7] we don't need b anymore */ - -#define t_1 t8 -#define t_2 t9 - -#define c_1 v0 -#define c_2 v1 -#define c_3 a3 - -#define FRAME_SIZE 48 - -.align 5 -LEAF(bn_mul_comba8) - .set noreorder - PTR_SUB sp,FRAME_SIZE - .frame sp,64,ra - .set reorder - ld a_0,0(a1) /* If compiled with -mips3 option on - * R5000 box assembler barks on this - * line with "shouldn't have mult/div - * as last instruction in bb (R10K - * bug)" warning. If anybody out there - * has a clue about how to circumvent - * this do send me a note. - * <appro@fy.chalmers.se> - */ - ld b_0,0(a2) - ld a_1,8(a1) - ld a_2,16(a1) - ld a_3,24(a1) - ld b_1,8(a2) - ld b_2,16(a2) - ld b_3,24(a2) - dmultu a_0,b_0 /* mul_add_c(a[0],b[0],c1,c2,c3); */ - sd s0,0(sp) - sd s1,8(sp) - sd s2,16(sp) - sd s3,24(sp) - sd s4,32(sp) - sd s5,40(sp) - mflo c_1 - mfhi c_2 - - dmultu a_0,b_1 /* mul_add_c(a[0],b[1],c2,c3,c1); */ - ld a_4,32(a1) - ld a_5,40(a1) - ld a_6,48(a1) - ld a_7,56(a1) - ld b_4,32(a2) - ld b_5,40(a2) - mflo t_1 - mfhi t_2 - daddu c_2,t_1 - sltu AT,c_2,t_1 - daddu c_3,t_2,AT - dmultu a_1,b_0 /* mul_add_c(a[1],b[0],c2,c3,c1); */ - ld b_6,48(a2) - ld b_7,56(a2) - sd c_1,0(a0) /* r[0]=c1; */ - mflo t_1 - mfhi t_2 - daddu c_2,t_1 - sltu AT,c_2,t_1 - daddu t_2,AT - daddu c_3,t_2 - sltu c_1,c_3,t_2 - sd c_2,8(a0) /* r[1]=c2; */ - - dmultu a_2,b_0 /* mul_add_c(a[2],b[0],c3,c1,c2); */ - mflo t_1 - mfhi t_2 - daddu c_3,t_1 - sltu AT,c_3,t_1 - daddu t_2,AT - daddu c_1,t_2 - dmultu a_1,b_1 /* mul_add_c(a[1],b[1],c3,c1,c2); */ - mflo t_1 - mfhi t_2 - daddu c_3,t_1 - sltu AT,c_3,t_1 - daddu t_2,AT - daddu c_1,t_2 - sltu c_2,c_1,t_2 - dmultu a_0,b_2 /* mul_add_c(a[0],b[2],c3,c1,c2); */ - mflo t_1 - mfhi t_2 - daddu c_3,t_1 - sltu AT,c_3,t_1 - daddu t_2,AT - daddu c_1,t_2 - sltu AT,c_1,t_2 - daddu c_2,AT - sd c_3,16(a0) /* r[2]=c3; */ - - dmultu a_0,b_3 /* mul_add_c(a[0],b[3],c1,c2,c3); */ - mflo t_1 - mfhi t_2 - daddu c_1,t_1 - sltu AT,c_1,t_1 - daddu t_2,AT - daddu c_2,t_2 - sltu c_3,c_2,t_2 - dmultu a_1,b_2 /* mul_add_c(a[1],b[2],c1,c2,c3); */ - mflo t_1 - mfhi t_2 - daddu c_1,t_1 - sltu AT,c_1,t_1 - daddu t_2,AT - daddu c_2,t_2 - sltu AT,c_2,t_2 - daddu c_3,AT - dmultu a_2,b_1 /* mul_add_c(a[2],b[1],c1,c2,c3); */ - mflo t_1 - mfhi t_2 - daddu c_1,t_1 - sltu AT,c_1,t_1 - daddu t_2,AT - daddu c_2,t_2 - sltu AT,c_2,t_2 - daddu c_3,AT - dmultu a_3,b_0 /* mul_add_c(a[3],b[0],c1,c2,c3); */ - mflo t_1 - mfhi t_2 - daddu c_1,t_1 - sltu AT,c_1,t_1 - daddu t_2,AT - daddu c_2,t_2 - sltu AT,c_2,t_2 - daddu c_3,AT - sd c_1,24(a0) /* r[3]=c1; */ - - dmultu a_4,b_0 /* mul_add_c(a[4],b[0],c2,c3,c1); */ - mflo t_1 - mfhi t_2 - daddu c_2,t_1 - sltu AT,c_2,t_1 - daddu t_2,AT - daddu c_3,t_2 - sltu c_1,c_3,t_2 - dmultu a_3,b_1 /* mul_add_c(a[3],b[1],c2,c3,c1); */ - mflo t_1 - mfhi t_2 - daddu c_2,t_1 - sltu AT,c_2,t_1 - daddu t_2,AT - daddu c_3,t_2 - sltu AT,c_3,t_2 - daddu c_1,AT - dmultu a_2,b_2 /* mul_add_c(a[2],b[2],c2,c3,c1); */ - mflo t_1 - mfhi t_2 - daddu c_2,t_1 - sltu AT,c_2,t_1 - daddu t_2,AT - daddu c_3,t_2 - sltu AT,c_3,t_2 - daddu c_1,AT - dmultu a_1,b_3 /* mul_add_c(a[1],b[3],c2,c3,c1); */ - mflo t_1 - mfhi t_2 - daddu c_2,t_1 - sltu AT,c_2,t_1 - daddu t_2,AT - daddu c_3,t_2 - sltu AT,c_3,t_2 - daddu c_1,AT - dmultu a_0,b_4 /* mul_add_c(a[0],b[4],c2,c3,c1); */ - mflo t_1 - mfhi t_2 - daddu c_2,t_1 - sltu AT,c_2,t_1 - daddu t_2,AT - daddu c_3,t_2 - sltu AT,c_3,t_2 - daddu c_1,AT - sd c_2,32(a0) /* r[4]=c2; */ - - dmultu a_0,b_5 /* mul_add_c(a[0],b[5],c3,c1,c2); */ - mflo t_1 - mfhi t_2 - daddu c_3,t_1 - sltu AT,c_3,t_1 - daddu t_2,AT - daddu c_1,t_2 - sltu c_2,c_1,t_2 - dmultu a_1,b_4 /* mul_add_c(a[1],b[4],c3,c1,c2); */ - mflo t_1 - mfhi t_2 - daddu c_3,t_1 - sltu AT,c_3,t_1 - daddu t_2,AT - daddu c_1,t_2 - sltu AT,c_1,t_2 - daddu c_2,AT - dmultu a_2,b_3 /* mul_add_c(a[2],b[3],c3,c1,c2); */ - mflo t_1 - mfhi t_2 - daddu c_3,t_1 - sltu AT,c_3,t_1 - daddu t_2,AT - daddu c_1,t_2 - sltu AT,c_1,t_2 - daddu c_2,AT - dmultu a_3,b_2 /* mul_add_c(a[3],b[2],c3,c1,c2); */ - mflo t_1 - mfhi t_2 - daddu c_3,t_1 - sltu AT,c_3,t_1 - daddu t_2,AT - daddu c_1,t_2 - sltu AT,c_1,t_2 - daddu c_2,AT - dmultu a_4,b_1 /* mul_add_c(a[4],b[1],c3,c1,c2); */ - mflo t_1 - mfhi t_2 - daddu c_3,t_1 - sltu AT,c_3,t_1 - daddu t_2,AT - daddu c_1,t_2 - sltu AT,c_1,t_2 - daddu c_2,AT - dmultu a_5,b_0 /* mul_add_c(a[5],b[0],c3,c1,c2); */ - mflo t_1 - mfhi t_2 - daddu c_3,t_1 - sltu AT,c_3,t_1 - daddu t_2,AT - daddu c_1,t_2 - sltu AT,c_1,t_2 - daddu c_2,AT - sd c_3,40(a0) /* r[5]=c3; */ - - dmultu a_6,b_0 /* mul_add_c(a[6],b[0],c1,c2,c3); */ - mflo t_1 - mfhi t_2 - daddu c_1,t_1 - sltu AT,c_1,t_1 - daddu t_2,AT - daddu c_2,t_2 - sltu c_3,c_2,t_2 - dmultu a_5,b_1 /* mul_add_c(a[5],b[1],c1,c2,c3); */ - mflo t_1 - mfhi t_2 - daddu c_1,t_1 - sltu AT,c_1,t_1 - daddu t_2,AT - daddu c_2,t_2 - sltu AT,c_2,t_2 - daddu c_3,AT - dmultu a_4,b_2 /* mul_add_c(a[4],b[2],c1,c2,c3); */ - mflo t_1 - mfhi t_2 - daddu c_1,t_1 - sltu AT,c_1,t_1 - daddu t_2,AT - daddu c_2,t_2 - sltu AT,c_2,t_2 - daddu c_3,AT - dmultu a_3,b_3 /* mul_add_c(a[3],b[3],c1,c2,c3); */ - mflo t_1 - mfhi t_2 - daddu c_1,t_1 - sltu AT,c_1,t_1 - daddu t_2,AT - daddu c_2,t_2 - sltu AT,c_2,t_2 - daddu c_3,AT - dmultu a_2,b_4 /* mul_add_c(a[2],b[4],c1,c2,c3); */ - mflo t_1 - mfhi t_2 - daddu c_1,t_1 - sltu AT,c_1,t_1 - daddu t_2,AT - daddu c_2,t_2 - sltu AT,c_2,t_2 - daddu c_3,AT - dmultu a_1,b_5 /* mul_add_c(a[1],b[5],c1,c2,c3); */ - mflo t_1 - mfhi t_2 - daddu c_1,t_1 - sltu AT,c_1,t_1 - daddu t_2,AT - daddu c_2,t_2 - sltu AT,c_2,t_2 - daddu c_3,AT - dmultu a_0,b_6 /* mul_add_c(a[0],b[6],c1,c2,c3); */ - mflo t_1 - mfhi t_2 - daddu c_1,t_1 - sltu AT,c_1,t_1 - daddu t_2,AT - daddu c_2,t_2 - sltu AT,c_2,t_2 - daddu c_3,AT - sd c_1,48(a0) /* r[6]=c1; */ - - dmultu a_0,b_7 /* mul_add_c(a[0],b[7],c2,c3,c1); */ - mflo t_1 - mfhi t_2 - daddu c_2,t_1 - sltu AT,c_2,t_1 - daddu t_2,AT - daddu c_3,t_2 - sltu c_1,c_3,t_2 - dmultu a_1,b_6 /* mul_add_c(a[1],b[6],c2,c3,c1); */ - mflo t_1 - mfhi t_2 - daddu c_2,t_1 - sltu AT,c_2,t_1 - daddu t_2,AT - daddu c_3,t_2 - sltu AT,c_3,t_2 - daddu c_1,AT - dmultu a_2,b_5 /* mul_add_c(a[2],b[5],c2,c3,c1); */ - mflo t_1 - mfhi t_2 - daddu c_2,t_1 - sltu AT,c_2,t_1 - daddu t_2,AT - daddu c_3,t_2 - sltu AT,c_3,t_2 - daddu c_1,AT - dmultu a_3,b_4 /* mul_add_c(a[3],b[4],c2,c3,c1); */ - mflo t_1 - mfhi t_2 - daddu c_2,t_1 - sltu AT,c_2,t_1 - daddu t_2,AT - daddu c_3,t_2 - sltu AT,c_3,t_2 - daddu c_1,AT - dmultu a_4,b_3 /* mul_add_c(a[4],b[3],c2,c3,c1); */ - mflo t_1 - mfhi t_2 - daddu c_2,t_1 - sltu AT,c_2,t_1 - daddu t_2,AT - daddu c_3,t_2 - sltu AT,c_3,t_2 - daddu c_1,AT - dmultu a_5,b_2 /* mul_add_c(a[5],b[2],c2,c3,c1); */ - mflo t_1 - mfhi t_2 - daddu c_2,t_1 - sltu AT,c_2,t_1 - daddu t_2,AT - daddu c_3,t_2 - sltu AT,c_3,t_2 - daddu c_1,AT - dmultu a_6,b_1 /* mul_add_c(a[6],b[1],c2,c3,c1); */ - mflo t_1 - mfhi t_2 - daddu c_2,t_1 - sltu AT,c_2,t_1 - daddu t_2,AT - daddu c_3,t_2 - sltu AT,c_3,t_2 - daddu c_1,AT - dmultu a_7,b_0 /* mul_add_c(a[7],b[0],c2,c3,c1); */ - mflo t_1 - mfhi t_2 - daddu c_2,t_1 - sltu AT,c_2,t_1 - daddu t_2,AT - daddu c_3,t_2 - sltu AT,c_3,t_2 - daddu c_1,AT - sd c_2,56(a0) /* r[7]=c2; */ - - dmultu a_7,b_1 /* mul_add_c(a[7],b[1],c3,c1,c2); */ - mflo t_1 - mfhi t_2 - daddu c_3,t_1 - sltu AT,c_3,t_1 - daddu t_2,AT - daddu c_1,t_2 - sltu c_2,c_1,t_2 - dmultu a_6,b_2 /* mul_add_c(a[6],b[2],c3,c1,c2); */ - mflo t_1 - mfhi t_2 - daddu c_3,t_1 - sltu AT,c_3,t_1 - daddu t_2,AT - daddu c_1,t_2 - sltu AT,c_1,t_2 - daddu c_2,AT - dmultu a_5,b_3 /* mul_add_c(a[5],b[3],c3,c1,c2); */ - mflo t_1 - mfhi t_2 - daddu c_3,t_1 - sltu AT,c_3,t_1 - daddu t_2,AT - daddu c_1,t_2 - sltu AT,c_1,t_2 - daddu c_2,AT - dmultu a_4,b_4 /* mul_add_c(a[4],b[4],c3,c1,c2); */ - mflo t_1 - mfhi t_2 - daddu c_3,t_1 - sltu AT,c_3,t_1 - daddu t_2,AT - daddu c_1,t_2 - sltu AT,c_1,t_2 - daddu c_2,AT - dmultu a_3,b_5 /* mul_add_c(a[3],b[5],c3,c1,c2); */ - mflo t_1 - mfhi t_2 - daddu c_3,t_1 - sltu AT,c_3,t_1 - daddu t_2,AT - daddu c_1,t_2 - sltu AT,c_1,t_2 - daddu c_2,AT - dmultu a_2,b_6 /* mul_add_c(a[2],b[6],c3,c1,c2); */ - mflo t_1 - mfhi t_2 - daddu c_3,t_1 - sltu AT,c_3,t_1 - daddu t_2,AT - daddu c_1,t_2 - sltu AT,c_1,t_2 - daddu c_2,AT - dmultu a_1,b_7 /* mul_add_c(a[1],b[7],c3,c1,c2); */ - mflo t_1 - mfhi t_2 - daddu c_3,t_1 - sltu AT,c_3,t_1 - daddu t_2,AT - daddu c_1,t_2 - sltu AT,c_1,t_2 - daddu c_2,AT - sd c_3,64(a0) /* r[8]=c3; */ - - dmultu a_2,b_7 /* mul_add_c(a[2],b[7],c1,c2,c3); */ - mflo t_1 - mfhi t_2 - daddu c_1,t_1 - sltu AT,c_1,t_1 - daddu t_2,AT - daddu c_2,t_2 - sltu c_3,c_2,t_2 - dmultu a_3,b_6 /* mul_add_c(a[3],b[6],c1,c2,c3); */ - mflo t_1 - mfhi t_2 - daddu c_1,t_1 - sltu AT,c_1,t_1 - daddu t_2,AT - daddu c_2,t_2 - sltu AT,c_2,t_2 - daddu c_3,AT - dmultu a_4,b_5 /* mul_add_c(a[4],b[5],c1,c2,c3); */ - mflo t_1 - mfhi t_2 - daddu c_1,t_1 - sltu AT,c_1,t_1 - daddu t_2,AT - daddu c_2,t_2 - sltu AT,c_2,t_2 - daddu c_3,AT - dmultu a_5,b_4 /* mul_add_c(a[5],b[4],c1,c2,c3); */ - mflo t_1 - mfhi t_2 - daddu c_1,t_1 - sltu AT,c_1,t_1 - daddu t_2,AT - daddu c_2,t_2 - sltu AT,c_2,t_2 - daddu c_3,AT - dmultu a_6,b_3 /* mul_add_c(a[6],b[3],c1,c2,c3); */ - mflo t_1 - mfhi t_2 - daddu c_1,t_1 - sltu AT,c_1,t_1 - daddu t_2,AT - daddu c_2,t_2 - sltu AT,c_2,t_2 - daddu c_3,AT - dmultu a_7,b_2 /* mul_add_c(a[7],b[2],c1,c2,c3); */ - mflo t_1 - mfhi t_2 - daddu c_1,t_1 - sltu AT,c_1,t_1 - daddu t_2,AT - daddu c_2,t_2 - sltu AT,c_2,t_2 - daddu c_3,AT - sd c_1,72(a0) /* r[9]=c1; */ - - dmultu a_7,b_3 /* mul_add_c(a[7],b[3],c2,c3,c1); */ - mflo t_1 - mfhi t_2 - daddu c_2,t_1 - sltu AT,c_2,t_1 - daddu t_2,AT - daddu c_3,t_2 - sltu c_1,c_3,t_2 - dmultu a_6,b_4 /* mul_add_c(a[6],b[4],c2,c3,c1); */ - mflo t_1 - mfhi t_2 - daddu c_2,t_1 - sltu AT,c_2,t_1 - daddu t_2,AT - daddu c_3,t_2 - sltu AT,c_3,t_2 - daddu c_1,AT - dmultu a_5,b_5 /* mul_add_c(a[5],b[5],c2,c3,c1); */ - mflo t_1 - mfhi t_2 - daddu c_2,t_1 - sltu AT,c_2,t_1 - daddu t_2,AT - daddu c_3,t_2 - sltu AT,c_3,t_2 - daddu c_1,AT - dmultu a_4,b_6 /* mul_add_c(a[4],b[6],c2,c3,c1); */ - mflo t_1 - mfhi t_2 - daddu c_2,t_1 - sltu AT,c_2,t_1 - daddu t_2,AT - daddu c_3,t_2 - sltu AT,c_3,t_2 - daddu c_1,AT - dmultu a_3,b_7 /* mul_add_c(a[3],b[7],c2,c3,c1); */ - mflo t_1 - mfhi t_2 - daddu c_2,t_1 - sltu AT,c_2,t_1 - daddu t_2,AT - daddu c_3,t_2 - sltu AT,c_3,t_2 - daddu c_1,AT - sd c_2,80(a0) /* r[10]=c2; */ - - dmultu a_4,b_7 /* mul_add_c(a[4],b[7],c3,c1,c2); */ - mflo t_1 - mfhi t_2 - daddu c_3,t_1 - sltu AT,c_3,t_1 - daddu t_2,AT - daddu c_1,t_2 - sltu c_2,c_1,t_2 - dmultu a_5,b_6 /* mul_add_c(a[5],b[6],c3,c1,c2); */ - mflo t_1 - mfhi t_2 - daddu c_3,t_1 - sltu AT,c_3,t_1 - daddu t_2,AT - daddu c_1,t_2 - sltu AT,c_1,t_2 - daddu c_2,AT - dmultu a_6,b_5 /* mul_add_c(a[6],b[5],c3,c1,c2); */ - mflo t_1 - mfhi t_2 - daddu c_3,t_1 - sltu AT,c_3,t_1 - daddu t_2,AT - daddu c_1,t_2 - sltu AT,c_1,t_2 - daddu c_2,AT - dmultu a_7,b_4 /* mul_add_c(a[7],b[4],c3,c1,c2); */ - mflo t_1 - mfhi t_2 - daddu c_3,t_1 - sltu AT,c_3,t_1 - daddu t_2,AT - daddu c_1,t_2 - sltu AT,c_1,t_2 - daddu c_2,AT - sd c_3,88(a0) /* r[11]=c3; */ - - dmultu a_7,b_5 /* mul_add_c(a[7],b[5],c1,c2,c3); */ - mflo t_1 - mfhi t_2 - daddu c_1,t_1 - sltu AT,c_1,t_1 - daddu t_2,AT - daddu c_2,t_2 - sltu c_3,c_2,t_2 - dmultu a_6,b_6 /* mul_add_c(a[6],b[6],c1,c2,c3); */ - mflo t_1 - mfhi t_2 - daddu c_1,t_1 - sltu AT,c_1,t_1 - daddu t_2,AT - daddu c_2,t_2 - sltu AT,c_2,t_2 - daddu c_3,AT - dmultu a_5,b_7 /* mul_add_c(a[5],b[7],c1,c2,c3); */ - mflo t_1 - mfhi t_2 - daddu c_1,t_1 - sltu AT,c_1,t_1 - daddu t_2,AT - daddu c_2,t_2 - sltu AT,c_2,t_2 - daddu c_3,AT - sd c_1,96(a0) /* r[12]=c1; */ - - dmultu a_6,b_7 /* mul_add_c(a[6],b[7],c2,c3,c1); */ - mflo t_1 - mfhi t_2 - daddu c_2,t_1 - sltu AT,c_2,t_1 - daddu t_2,AT - daddu c_3,t_2 - sltu c_1,c_3,t_2 - dmultu a_7,b_6 /* mul_add_c(a[7],b[6],c2,c3,c1); */ - mflo t_1 - mfhi t_2 - daddu c_2,t_1 - sltu AT,c_2,t_1 - daddu t_2,AT - daddu c_3,t_2 - sltu AT,c_3,t_2 - daddu c_1,AT - sd c_2,104(a0) /* r[13]=c2; */ - - dmultu a_7,b_7 /* mul_add_c(a[7],b[7],c3,c1,c2); */ - ld s0,0(sp) - ld s1,8(sp) - ld s2,16(sp) - ld s3,24(sp) - ld s4,32(sp) - ld s5,40(sp) - mflo t_1 - mfhi t_2 - daddu c_3,t_1 - sltu AT,c_3,t_1 - daddu t_2,AT - daddu c_1,t_2 - sd c_3,112(a0) /* r[14]=c3; */ - sd c_1,120(a0) /* r[15]=c1; */ - - PTR_ADD sp,FRAME_SIZE - - jr ra -END(bn_mul_comba8) - -.align 5 -LEAF(bn_mul_comba4) - .set reorder - ld a_0,0(a1) - ld b_0,0(a2) - ld a_1,8(a1) - ld a_2,16(a1) - dmultu a_0,b_0 /* mul_add_c(a[0],b[0],c1,c2,c3); */ - ld a_3,24(a1) - ld b_1,8(a2) - ld b_2,16(a2) - ld b_3,24(a2) - mflo c_1 - mfhi c_2 - sd c_1,0(a0) - - dmultu a_0,b_1 /* mul_add_c(a[0],b[1],c2,c3,c1); */ - mflo t_1 - mfhi t_2 - daddu c_2,t_1 - sltu AT,c_2,t_1 - daddu c_3,t_2,AT - dmultu a_1,b_0 /* mul_add_c(a[1],b[0],c2,c3,c1); */ - mflo t_1 - mfhi t_2 - daddu c_2,t_1 - sltu AT,c_2,t_1 - daddu t_2,AT - daddu c_3,t_2 - sltu c_1,c_3,t_2 - sd c_2,8(a0) - - dmultu a_2,b_0 /* mul_add_c(a[2],b[0],c3,c1,c2); */ - mflo t_1 - mfhi t_2 - daddu c_3,t_1 - sltu AT,c_3,t_1 - daddu t_2,AT - daddu c_1,t_2 - dmultu a_1,b_1 /* mul_add_c(a[1],b[1],c3,c1,c2); */ - mflo t_1 - mfhi t_2 - daddu c_3,t_1 - sltu AT,c_3,t_1 - daddu t_2,AT - daddu c_1,t_2 - sltu c_2,c_1,t_2 - dmultu a_0,b_2 /* mul_add_c(a[0],b[2],c3,c1,c2); */ - mflo t_1 - mfhi t_2 - daddu c_3,t_1 - sltu AT,c_3,t_1 - daddu t_2,AT - daddu c_1,t_2 - sltu AT,c_1,t_2 - daddu c_2,AT - sd c_3,16(a0) - - dmultu a_0,b_3 /* mul_add_c(a[0],b[3],c1,c2,c3); */ - mflo t_1 - mfhi t_2 - daddu c_1,t_1 - sltu AT,c_1,t_1 - daddu t_2,AT - daddu c_2,t_2 - sltu c_3,c_2,t_2 - dmultu a_1,b_2 /* mul_add_c(a[1],b[2],c1,c2,c3); */ - mflo t_1 - mfhi t_2 - daddu c_1,t_1 - sltu AT,c_1,t_1 - daddu t_2,AT - daddu c_2,t_2 - sltu AT,c_2,t_2 - daddu c_3,AT - dmultu a_2,b_1 /* mul_add_c(a[2],b[1],c1,c2,c3); */ - mflo t_1 - mfhi t_2 - daddu c_1,t_1 - sltu AT,c_1,t_1 - daddu t_2,AT - daddu c_2,t_2 - sltu AT,c_2,t_2 - daddu c_3,AT - dmultu a_3,b_0 /* mul_add_c(a[3],b[0],c1,c2,c3); */ - mflo t_1 - mfhi t_2 - daddu c_1,t_1 - sltu AT,c_1,t_1 - daddu t_2,AT - daddu c_2,t_2 - sltu AT,c_2,t_2 - daddu c_3,AT - sd c_1,24(a0) - - dmultu a_3,b_1 /* mul_add_c(a[3],b[1],c2,c3,c1); */ - mflo t_1 - mfhi t_2 - daddu c_2,t_1 - sltu AT,c_2,t_1 - daddu t_2,AT - daddu c_3,t_2 - sltu c_1,c_3,t_2 - dmultu a_2,b_2 /* mul_add_c(a[2],b[2],c2,c3,c1); */ - mflo t_1 - mfhi t_2 - daddu c_2,t_1 - sltu AT,c_2,t_1 - daddu t_2,AT - daddu c_3,t_2 - sltu AT,c_3,t_2 - daddu c_1,AT - dmultu a_1,b_3 /* mul_add_c(a[1],b[3],c2,c3,c1); */ - mflo t_1 - mfhi t_2 - daddu c_2,t_1 - sltu AT,c_2,t_1 - daddu t_2,AT - daddu c_3,t_2 - sltu AT,c_3,t_2 - daddu c_1,AT - sd c_2,32(a0) - - dmultu a_2,b_3 /* mul_add_c(a[2],b[3],c3,c1,c2); */ - mflo t_1 - mfhi t_2 - daddu c_3,t_1 - sltu AT,c_3,t_1 - daddu t_2,AT - daddu c_1,t_2 - sltu c_2,c_1,t_2 - dmultu a_3,b_2 /* mul_add_c(a[3],b[2],c3,c1,c2); */ - mflo t_1 - mfhi t_2 - daddu c_3,t_1 - sltu AT,c_3,t_1 - daddu t_2,AT - daddu c_1,t_2 - sltu AT,c_1,t_2 - daddu c_2,AT - sd c_3,40(a0) - - dmultu a_3,b_3 /* mul_add_c(a[3],b[3],c1,c2,c3); */ - mflo t_1 - mfhi t_2 - daddu c_1,t_1 - sltu AT,c_1,t_1 - daddu t_2,AT - daddu c_2,t_2 - sd c_1,48(a0) - sd c_2,56(a0) - - jr ra -END(bn_mul_comba4) - -#undef a_4 -#undef a_5 -#undef a_6 -#undef a_7 -#define a_4 b_0 -#define a_5 b_1 -#define a_6 b_2 -#define a_7 b_3 - -.align 5 -LEAF(bn_sqr_comba8) - .set reorder - ld a_0,0(a1) - ld a_1,8(a1) - ld a_2,16(a1) - ld a_3,24(a1) - - dmultu a_0,a_0 /* mul_add_c(a[0],b[0],c1,c2,c3); */ - ld a_4,32(a1) - ld a_5,40(a1) - ld a_6,48(a1) - ld a_7,56(a1) - mflo c_1 - mfhi c_2 - sd c_1,0(a0) - - dmultu a_0,a_1 /* mul_add_c2(a[0],b[1],c2,c3,c1); */ - mflo t_1 - mfhi t_2 - slt c_1,t_2,zero - dsll t_2,1 - slt a2,t_1,zero - daddu t_2,a2 - dsll t_1,1 - daddu c_2,t_1 - sltu AT,c_2,t_1 - daddu c_3,t_2,AT - sd c_2,8(a0) - - dmultu a_2,a_0 /* mul_add_c2(a[2],b[0],c3,c1,c2); */ - mflo t_1 - mfhi t_2 - slt c_2,t_2,zero - dsll t_2,1 - slt a2,t_1,zero - daddu t_2,a2 - dsll t_1,1 - daddu c_3,t_1 - sltu AT,c_3,t_1 - daddu t_2,AT - daddu c_1,t_2 - sltu AT,c_1,t_2 - daddu c_2,AT - dmultu a_1,a_1 /* mul_add_c(a[1],b[1],c3,c1,c2); */ - mflo t_1 - mfhi t_2 - daddu c_3,t_1 - sltu AT,c_3,t_1 - daddu t_2,AT - daddu c_1,t_2 - sltu AT,c_1,t_2 - daddu c_2,AT - sd c_3,16(a0) - - dmultu a_0,a_3 /* mul_add_c2(a[0],b[3],c1,c2,c3); */ - mflo t_1 - mfhi t_2 - slt c_3,t_2,zero - dsll t_2,1 - slt a2,t_1,zero - daddu t_2,a2 - dsll t_1,1 - daddu c_1,t_1 - sltu AT,c_1,t_1 - daddu t_2,AT - daddu c_2,t_2 - sltu AT,c_2,t_2 - daddu c_3,AT - dmultu a_1,a_2 /* mul_add_c2(a[1],b[2],c1,c2,c3); */ - mflo t_1 - mfhi t_2 - slt AT,t_2,zero - daddu c_3,AT - dsll t_2,1 - slt a2,t_1,zero - daddu t_2,a2 - dsll t_1,1 - daddu c_1,t_1 - sltu AT,c_1,t_1 - daddu t_2,AT - daddu c_2,t_2 - sltu AT,c_2,t_2 - daddu c_3,AT - sd c_1,24(a0) - - dmultu a_4,a_0 /* mul_add_c2(a[4],b[0],c2,c3,c1); */ - mflo t_1 - mfhi t_2 - slt c_1,t_2,zero - dsll t_2,1 - slt a2,t_1,zero - daddu t_2,a2 - dsll t_1,1 - daddu c_2,t_1 - sltu AT,c_2,t_1 - daddu t_2,AT - daddu c_3,t_2 - sltu AT,c_3,t_2 - daddu c_1,AT - dmultu a_3,a_1 /* mul_add_c2(a[3],b[1],c2,c3,c1); */ - mflo t_1 - mfhi t_2 - slt AT,t_2,zero - daddu c_1,AT - dsll t_2,1 - slt a2,t_1,zero - daddu t_2,a2 - dsll t_1,1 - daddu c_2,t_1 - sltu AT,c_2,t_1 - daddu t_2,AT - daddu c_3,t_2 - sltu AT,c_3,t_2 - daddu c_1,AT - dmultu a_2,a_2 /* mul_add_c(a[2],b[2],c2,c3,c1); */ - mflo t_1 - mfhi t_2 - daddu c_2,t_1 - sltu AT,c_2,t_1 - daddu t_2,AT - daddu c_3,t_2 - sltu AT,c_3,t_2 - daddu c_1,AT - sd c_2,32(a0) - - dmultu a_0,a_5 /* mul_add_c2(a[0],b[5],c3,c1,c2); */ - mflo t_1 - mfhi t_2 - slt c_2,t_2,zero - dsll t_2,1 - slt a2,t_1,zero - daddu t_2,a2 - dsll t_1,1 - daddu c_3,t_1 - sltu AT,c_3,t_1 - daddu t_2,AT - daddu c_1,t_2 - sltu AT,c_1,t_2 - daddu c_2,AT - dmultu a_1,a_4 /* mul_add_c2(a[1],b[4],c3,c1,c2); */ - mflo t_1 - mfhi t_2 - slt AT,t_2,zero - daddu c_2,AT - dsll t_2,1 - slt a2,t_1,zero - daddu t_2,a2 - dsll t_1,1 - daddu c_3,t_1 - sltu AT,c_3,t_1 - daddu t_2,AT - daddu c_1,t_2 - sltu AT,c_1,t_2 - daddu c_2,AT - dmultu a_2,a_3 /* mul_add_c2(a[2],b[3],c3,c1,c2); */ - mflo t_1 - mfhi t_2 - slt AT,t_2,zero - daddu c_2,AT - dsll t_2,1 - slt a2,t_1,zero - daddu t_2,a2 - dsll t_1,1 - daddu c_3,t_1 - sltu AT,c_3,t_1 - daddu t_2,AT - daddu c_1,t_2 - sltu AT,c_1,t_2 - daddu c_2,AT - sd c_3,40(a0) - - dmultu a_6,a_0 /* mul_add_c2(a[6],b[0],c1,c2,c3); */ - mflo t_1 - mfhi t_2 - slt c_3,t_2,zero - dsll t_2,1 - slt a2,t_1,zero - daddu t_2,a2 - dsll t_1,1 - daddu c_1,t_1 - sltu AT,c_1,t_1 - daddu t_2,AT - daddu c_2,t_2 - sltu AT,c_2,t_2 - daddu c_3,AT - dmultu a_5,a_1 /* mul_add_c2(a[5],b[1],c1,c2,c3); */ - mflo t_1 - mfhi t_2 - slt AT,t_2,zero - daddu c_3,AT - dsll t_2,1 - slt a2,t_1,zero - daddu t_2,a2 - dsll t_1,1 - daddu c_1,t_1 - sltu AT,c_1,t_1 - daddu t_2,AT - daddu c_2,t_2 - sltu AT,c_2,t_2 - daddu c_3,AT - dmultu a_4,a_2 /* mul_add_c2(a[4],b[2],c1,c2,c3); */ - mflo t_1 - mfhi t_2 - slt AT,t_2,zero - daddu c_3,AT - dsll t_2,1 - slt a2,t_1,zero - daddu t_2,a2 - dsll t_1,1 - daddu c_1,t_1 - sltu AT,c_1,t_1 - daddu t_2,AT - daddu c_2,t_2 - sltu AT,c_2,t_2 - daddu c_3,AT - dmultu a_3,a_3 /* mul_add_c(a[3],b[3],c1,c2,c3); */ - mflo t_1 - mfhi t_2 - daddu c_1,t_1 - sltu AT,c_1,t_1 - daddu t_2,AT - daddu c_2,t_2 - sltu AT,c_2,t_2 - daddu c_3,AT - sd c_1,48(a0) - - dmultu a_0,a_7 /* mul_add_c2(a[0],b[7],c2,c3,c1); */ - mflo t_1 - mfhi t_2 - slt c_1,t_2,zero - dsll t_2,1 - slt a2,t_1,zero - daddu t_2,a2 - dsll t_1,1 - daddu c_2,t_1 - sltu AT,c_2,t_1 - daddu t_2,AT - daddu c_3,t_2 - sltu AT,c_3,t_2 - daddu c_1,AT - dmultu a_1,a_6 /* mul_add_c2(a[1],b[6],c2,c3,c1); */ - mflo t_1 - mfhi t_2 - slt AT,t_2,zero - daddu c_1,AT - dsll t_2,1 - slt a2,t_1,zero - daddu t_2,a2 - dsll t_1,1 - daddu c_2,t_1 - sltu AT,c_2,t_1 - daddu t_2,AT - daddu c_3,t_2 - sltu AT,c_3,t_2 - daddu c_1,AT - dmultu a_2,a_5 /* mul_add_c2(a[2],b[5],c2,c3,c1); */ - mflo t_1 - mfhi t_2 - slt AT,t_2,zero - daddu c_1,AT - dsll t_2,1 - slt a2,t_1,zero - daddu t_2,a2 - dsll t_1,1 - daddu c_2,t_1 - sltu AT,c_2,t_1 - daddu t_2,AT - daddu c_3,t_2 - sltu AT,c_3,t_2 - daddu c_1,AT - dmultu a_3,a_4 /* mul_add_c2(a[3],b[4],c2,c3,c1); */ - mflo t_1 - mfhi t_2 - slt AT,t_2,zero - daddu c_1,AT - dsll t_2,1 - slt a2,t_1,zero - daddu t_2,a2 - dsll t_1,1 - daddu c_2,t_1 - sltu AT,c_2,t_1 - daddu t_2,AT - daddu c_3,t_2 - sltu AT,c_3,t_2 - daddu c_1,AT - sd c_2,56(a0) - - dmultu a_7,a_1 /* mul_add_c2(a[7],b[1],c3,c1,c2); */ - mflo t_1 - mfhi t_2 - slt c_2,t_2,zero - dsll t_2,1 - slt a2,t_1,zero - daddu t_2,a2 - dsll t_1,1 - daddu c_3,t_1 - sltu AT,c_3,t_1 - daddu t_2,AT - daddu c_1,t_2 - sltu AT,c_1,t_2 - daddu c_2,AT - dmultu a_6,a_2 /* mul_add_c2(a[6],b[2],c3,c1,c2); */ - mflo t_1 - mfhi t_2 - slt AT,t_2,zero - daddu c_2,AT - dsll t_2,1 - slt a2,t_1,zero - daddu t_2,a2 - dsll t_1,1 - daddu c_3,t_1 - sltu AT,c_3,t_1 - daddu t_2,AT - daddu c_1,t_2 - sltu AT,c_1,t_2 - daddu c_2,AT - dmultu a_5,a_3 /* mul_add_c2(a[5],b[3],c3,c1,c2); */ - mflo t_1 - mfhi t_2 - slt AT,t_2,zero - daddu c_2,AT - dsll t_2,1 - slt a2,t_1,zero - daddu t_2,a2 - dsll t_1,1 - daddu c_3,t_1 - sltu AT,c_3,t_1 - daddu t_2,AT - daddu c_1,t_2 - sltu AT,c_1,t_2 - daddu c_2,AT - dmultu a_4,a_4 /* mul_add_c(a[4],b[4],c3,c1,c2); */ - mflo t_1 - mfhi t_2 - daddu c_3,t_1 - sltu AT,c_3,t_1 - daddu t_2,AT - daddu c_1,t_2 - sltu AT,c_1,t_2 - daddu c_2,AT - sd c_3,64(a0) - - dmultu a_2,a_7 /* mul_add_c2(a[2],b[7],c1,c2,c3); */ - mflo t_1 - mfhi t_2 - slt c_3,t_2,zero - dsll t_2,1 - slt a2,t_1,zero - daddu t_2,a2 - dsll t_1,1 - daddu c_1,t_1 - sltu AT,c_1,t_1 - daddu t_2,AT - daddu c_2,t_2 - sltu AT,c_2,t_2 - daddu c_3,AT - dmultu a_3,a_6 /* mul_add_c2(a[3],b[6],c1,c2,c3); */ - mflo t_1 - mfhi t_2 - slt AT,t_2,zero - daddu c_3,AT - dsll t_2,1 - slt a2,t_1,zero - daddu t_2,a2 - dsll t_1,1 - daddu c_1,t_1 - sltu AT,c_1,t_1 - daddu t_2,AT - daddu c_2,t_2 - sltu AT,c_2,t_2 - daddu c_3,AT - dmultu a_4,a_5 /* mul_add_c2(a[4],b[5],c1,c2,c3); */ - mflo t_1 - mfhi t_2 - slt AT,t_2,zero - daddu c_3,AT - dsll t_2,1 - slt a2,t_1,zero - daddu t_2,a2 - dsll t_1,1 - daddu c_1,t_1 - sltu AT,c_1,t_1 - daddu t_2,AT - daddu c_2,t_2 - sltu AT,c_2,t_2 - daddu c_3,AT - sd c_1,72(a0) - - dmultu a_7,a_3 /* mul_add_c2(a[7],b[3],c2,c3,c1); */ - mflo t_1 - mfhi t_2 - slt c_1,t_2,zero - dsll t_2,1 - slt a2,t_1,zero - daddu t_2,a2 - dsll t_1,1 - daddu c_2,t_1 - sltu AT,c_2,t_1 - daddu t_2,AT - daddu c_3,t_2 - sltu AT,c_3,t_2 - daddu c_1,AT - dmultu a_6,a_4 /* mul_add_c2(a[6],b[4],c2,c3,c1); */ - mflo t_1 - mfhi t_2 - slt AT,t_2,zero - daddu c_1,AT - dsll t_2,1 - slt a2,t_1,zero - daddu t_2,a2 - dsll t_1,1 - daddu c_2,t_1 - sltu AT,c_2,t_1 - daddu t_2,AT - daddu c_3,t_2 - sltu AT,c_3,t_2 - daddu c_1,AT - dmultu a_5,a_5 /* mul_add_c(a[5],b[5],c2,c3,c1); */ - mflo t_1 - mfhi t_2 - daddu c_2,t_1 - sltu AT,c_2,t_1 - daddu t_2,AT - daddu c_3,t_2 - sltu AT,c_3,t_2 - daddu c_1,AT - sd c_2,80(a0) - - dmultu a_4,a_7 /* mul_add_c2(a[4],b[7],c3,c1,c2); */ - mflo t_1 - mfhi t_2 - slt c_2,t_2,zero - dsll t_2,1 - slt a2,t_1,zero - daddu t_2,a2 - dsll t_1,1 - daddu c_3,t_1 - sltu AT,c_3,t_1 - daddu t_2,AT - daddu c_1,t_2 - sltu AT,c_1,t_2 - daddu c_2,AT - dmultu a_5,a_6 /* mul_add_c2(a[5],b[6],c3,c1,c2); */ - mflo t_1 - mfhi t_2 - slt AT,t_2,zero - daddu c_2,AT - dsll t_2,1 - slt a2,t_1,zero - daddu t_2,a2 - dsll t_1,1 - daddu c_3,t_1 - sltu AT,c_3,t_1 - daddu t_2,AT - daddu c_1,t_2 - sltu AT,c_1,t_2 - daddu c_2,AT - sd c_3,88(a0) - - dmultu a_7,a_5 /* mul_add_c2(a[7],b[5],c1,c2,c3); */ - mflo t_1 - mfhi t_2 - slt c_3,t_2,zero - dsll t_2,1 - slt a2,t_1,zero - daddu t_2,a2 - dsll t_1,1 - daddu c_1,t_1 - sltu AT,c_1,t_1 - daddu t_2,AT - daddu c_2,t_2 - sltu AT,c_2,t_2 - daddu c_3,AT - dmultu a_6,a_6 /* mul_add_c(a[6],b[6],c1,c2,c3); */ - mflo t_1 - mfhi t_2 - daddu c_1,t_1 - sltu AT,c_1,t_1 - daddu t_2,AT - daddu c_2,t_2 - sltu AT,c_2,t_2 - daddu c_3,AT - sd c_1,96(a0) - - dmultu a_6,a_7 /* mul_add_c2(a[6],b[7],c2,c3,c1); */ - mflo t_1 - mfhi t_2 - slt c_1,t_2,zero - dsll t_2,1 - slt a2,t_1,zero - daddu t_2,a2 - dsll t_1,1 - daddu c_2,t_1 - sltu AT,c_2,t_1 - daddu t_2,AT - daddu c_3,t_2 - sltu AT,c_3,t_2 - daddu c_1,AT - sd c_2,104(a0) - - dmultu a_7,a_7 /* mul_add_c(a[7],b[7],c3,c1,c2); */ - mflo t_1 - mfhi t_2 - daddu c_3,t_1 - sltu AT,c_3,t_1 - daddu t_2,AT - daddu c_1,t_2 - sd c_3,112(a0) - sd c_1,120(a0) - - jr ra -END(bn_sqr_comba8) - -.align 5 -LEAF(bn_sqr_comba4) - .set reorder - ld a_0,0(a1) - ld a_1,8(a1) - ld a_2,16(a1) - ld a_3,24(a1) - dmultu a_0,a_0 /* mul_add_c(a[0],b[0],c1,c2,c3); */ - mflo c_1 - mfhi c_2 - sd c_1,0(a0) - - dmultu a_0,a_1 /* mul_add_c2(a[0],b[1],c2,c3,c1); */ - mflo t_1 - mfhi t_2 - slt c_1,t_2,zero - dsll t_2,1 - slt a2,t_1,zero - daddu t_2,a2 - dsll t_1,1 - daddu c_2,t_1 - sltu AT,c_2,t_1 - daddu c_3,t_2,AT - sd c_2,8(a0) - - dmultu a_2,a_0 /* mul_add_c2(a[2],b[0],c3,c1,c2); */ - mflo t_1 - mfhi t_2 - slt c_2,t_2,zero - dsll t_2,1 - slt a2,t_1,zero - daddu t_2,a2 - dsll t_1,1 - daddu c_3,t_1 - sltu AT,c_3,t_1 - daddu t_2,AT - daddu c_1,t_2 - sltu AT,c_1,t_2 - daddu c_2,AT - dmultu a_1,a_1 /* mul_add_c(a[1],b[1],c3,c1,c2); */ - mflo t_1 - mfhi t_2 - daddu c_3,t_1 - sltu AT,c_3,t_1 - daddu t_2,AT - daddu c_1,t_2 - sltu AT,c_1,t_2 - daddu c_2,AT - sd c_3,16(a0) - - dmultu a_0,a_3 /* mul_add_c2(a[0],b[3],c1,c2,c3); */ - mflo t_1 - mfhi t_2 - slt c_3,t_2,zero - dsll t_2,1 - slt a2,t_1,zero - daddu t_2,a2 - dsll t_1,1 - daddu c_1,t_1 - sltu AT,c_1,t_1 - daddu t_2,AT - daddu c_2,t_2 - sltu AT,c_2,t_2 - daddu c_3,AT - dmultu a_1,a_2 /* mul_add_c(a2[1],b[2],c1,c2,c3); */ - mflo t_1 - mfhi t_2 - slt AT,t_2,zero - daddu c_3,AT - dsll t_2,1 - slt a2,t_1,zero - daddu t_2,a2 - dsll t_1,1 - daddu c_1,t_1 - sltu AT,c_1,t_1 - daddu t_2,AT - daddu c_2,t_2 - sltu AT,c_2,t_2 - daddu c_3,AT - sd c_1,24(a0) - - dmultu a_3,a_1 /* mul_add_c2(a[3],b[1],c2,c3,c1); */ - mflo t_1 - mfhi t_2 - slt c_1,t_2,zero - dsll t_2,1 - slt a2,t_1,zero - daddu t_2,a2 - dsll t_1,1 - daddu c_2,t_1 - sltu AT,c_2,t_1 - daddu t_2,AT - daddu c_3,t_2 - sltu AT,c_3,t_2 - daddu c_1,AT - dmultu a_2,a_2 /* mul_add_c(a[2],b[2],c2,c3,c1); */ - mflo t_1 - mfhi t_2 - daddu c_2,t_1 - sltu AT,c_2,t_1 - daddu t_2,AT - daddu c_3,t_2 - sltu AT,c_3,t_2 - daddu c_1,AT - sd c_2,32(a0) - - dmultu a_2,a_3 /* mul_add_c2(a[2],b[3],c3,c1,c2); */ - mflo t_1 - mfhi t_2 - slt c_2,t_2,zero - dsll t_2,1 - slt a2,t_1,zero - daddu t_2,a2 - dsll t_1,1 - daddu c_3,t_1 - sltu AT,c_3,t_1 - daddu t_2,AT - daddu c_1,t_2 - sltu AT,c_1,t_2 - daddu c_2,AT - sd c_3,40(a0) - - dmultu a_3,a_3 /* mul_add_c(a[3],b[3],c1,c2,c3); */ - mflo t_1 - mfhi t_2 - daddu c_1,t_1 - sltu AT,c_1,t_1 - daddu t_2,AT - daddu c_2,t_2 - sd c_1,48(a0) - sd c_2,56(a0) - - jr ra -END(bn_sqr_comba4) diff --git a/openssl/crypto/bn/asm/x86_64-gcc.c b/openssl/crypto/bn/asm/x86_64-gcc.c index 31476abeb..2d39407f4 100644 --- a/openssl/crypto/bn/asm/x86_64-gcc.c +++ b/openssl/crypto/bn/asm/x86_64-gcc.c @@ -273,6 +273,10 @@ BN_ULONG bn_sub_words(BN_ULONG *r, BN_ULONG *a, BN_ULONG *b, int n) /* sqr_add_c(a,i,c0,c1,c2) -- c+=a[i]^2 for three word number c=(c2,c1,c0) */ /* sqr_add_c2(a,i,c0,c1,c2) -- c+=2*a[i]*a[j] for three word number c=(c2,c1,c0) */ +/* + * Keep in mind that carrying into high part of multiplication result + * can not overflow, because it cannot be all-ones. + */ #if 0 /* original macros are kept for reference purposes */ #define mul_add_c(a,b,c0,c1,c2) { \ @@ -287,10 +291,10 @@ BN_ULONG bn_sub_words(BN_ULONG *r, BN_ULONG *a, BN_ULONG *b, int n) BN_ULONG ta=(a),tb=(b),t0; \ t1 = BN_UMULT_HIGH(ta,tb); \ t0 = ta * tb; \ - t2 = t1+t1; c2 += (t2<t1)?1:0; \ - t1 = t0+t0; t2 += (t1<t0)?1:0; \ - c0 += t1; t2 += (c0<t1)?1:0; \ + c0 += t0; t2 = t1+((c0<t0)?1:0);\ c1 += t2; c2 += (c1<t2)?1:0; \ + c0 += t0; t1 += (c0<t0)?1:0; \ + c1 += t1; c2 += (c1<t1)?1:0; \ } #else #define mul_add_c(a,b,c0,c1,c2) do { \ @@ -328,22 +332,14 @@ BN_ULONG bn_sub_words(BN_ULONG *r, BN_ULONG *a, BN_ULONG *b, int n) : "=a"(t1),"=d"(t2) \ : "a"(a),"m"(b) \ : "cc"); \ - asm ("addq %0,%0; adcq %2,%1" \ - : "+d"(t2),"+r"(c2) \ - : "g"(0) \ - : "cc"); \ - asm ("addq %0,%0; adcq %2,%1" \ - : "+a"(t1),"+d"(t2) \ - : "g"(0) \ - : "cc"); \ - asm ("addq %2,%0; adcq %3,%1" \ - : "+r"(c0),"+d"(t2) \ - : "a"(t1),"g"(0) \ - : "cc"); \ - asm ("addq %2,%0; adcq %3,%1" \ - : "+r"(c1),"+r"(c2) \ - : "d"(t2),"g"(0) \ - : "cc"); \ + asm ("addq %3,%0; adcq %4,%1; adcq %5,%2" \ + : "+r"(c0),"+r"(c1),"+r"(c2) \ + : "r"(t1),"r"(t2),"g"(0) \ + : "cc"); \ + asm ("addq %3,%0; adcq %4,%1; adcq %5,%2" \ + : "+r"(c0),"+r"(c1),"+r"(c2) \ + : "r"(t1),"r"(t2),"g"(0) \ + : "cc"); \ } while (0) #endif diff --git a/openssl/crypto/bn/bn.h b/openssl/crypto/bn/bn.h index 21a1a3fe3..c4d618522 100644 --- a/openssl/crypto/bn/bn.h +++ b/openssl/crypto/bn/bn.h @@ -780,7 +780,9 @@ int RAND_pseudo_bytes(unsigned char *buf,int num); #define bn_wcheck_size(bn, words) \ do { \ const BIGNUM *_bnum2 = (bn); \ - assert(words <= (_bnum2)->dmax && words >= (_bnum2)->top); \ + assert((words) <= (_bnum2)->dmax && (words) >= (_bnum2)->top); \ + /* avoid unused variable warning with NDEBUG */ \ + (void)(_bnum2); \ } while(0) #else /* !BN_DEBUG */ diff --git a/openssl/crypto/bn/bn_asm.c b/openssl/crypto/bn/bn_asm.c index c43c91cc0..a33b63411 100644 --- a/openssl/crypto/bn/bn_asm.c +++ b/openssl/crypto/bn/bn_asm.c @@ -438,6 +438,10 @@ BN_ULONG bn_sub_words(BN_ULONG *r, const BN_ULONG *a, const BN_ULONG *b, int n) /* sqr_add_c(a,i,c0,c1,c2) -- c+=a[i]^2 for three word number c=(c2,c1,c0) */ /* sqr_add_c2(a,i,c0,c1,c2) -- c+=2*a[i]*a[j] for three word number c=(c2,c1,c0) */ +/* + * Keep in mind that carrying into high part of multiplication result + * can not overflow, because it cannot be all-ones. + */ #ifdef BN_LLONG #define mul_add_c(a,b,c0,c1,c2) \ t=(BN_ULLONG)a*b; \ @@ -478,10 +482,10 @@ BN_ULONG bn_sub_words(BN_ULONG *r, const BN_ULONG *a, const BN_ULONG *b, int n) #define mul_add_c2(a,b,c0,c1,c2) { \ BN_ULONG ta=(a),tb=(b),t0; \ BN_UMULT_LOHI(t0,t1,ta,tb); \ - t2 = t1+t1; c2 += (t2<t1)?1:0; \ - t1 = t0+t0; t2 += (t1<t0)?1:0; \ - c0 += t1; t2 += (c0<t1)?1:0; \ + c0 += t0; t2 = t1+((c0<t0)?1:0);\ c1 += t2; c2 += (c1<t2)?1:0; \ + c0 += t0; t1 += (c0<t0)?1:0; \ + c1 += t1; c2 += (c1<t1)?1:0; \ } #define sqr_add_c(a,i,c0,c1,c2) { \ @@ -508,10 +512,10 @@ BN_ULONG bn_sub_words(BN_ULONG *r, const BN_ULONG *a, const BN_ULONG *b, int n) BN_ULONG ta=(a),tb=(b),t0; \ t1 = BN_UMULT_HIGH(ta,tb); \ t0 = ta * tb; \ - t2 = t1+t1; c2 += (t2<t1)?1:0; \ - t1 = t0+t0; t2 += (t1<t0)?1:0; \ - c0 += t1; t2 += (c0<t1)?1:0; \ + c0 += t0; t2 = t1+((c0<t0)?1:0);\ c1 += t2; c2 += (c1<t2)?1:0; \ + c0 += t0; t1 += (c0<t0)?1:0; \ + c1 += t1; c2 += (c1<t1)?1:0; \ } #define sqr_add_c(a,i,c0,c1,c2) { \ diff --git a/openssl/crypto/bn/bn_ctx.c b/openssl/crypto/bn/bn_ctx.c index 3f2256f67..90aa3aeb9 100644 --- a/openssl/crypto/bn/bn_ctx.c +++ b/openssl/crypto/bn/bn_ctx.c @@ -158,7 +158,7 @@ static void ctxdbg(BN_CTX *ctx) unsigned int bnidx = 0, fpidx = 0; BN_POOL_ITEM *item = ctx->pool.head; BN_STACK *stack = &ctx->stack; - fprintf(stderr,"(%08x): ", (unsigned int)ctx); + fprintf(stderr,"(%16p): ", ctx); while(bnidx < ctx->used) { fprintf(stderr,"%03x ", item->vals[bnidx++ % BN_CTX_POOL_SIZE].dmax); diff --git a/openssl/crypto/bn/bn_div.c b/openssl/crypto/bn/bn_div.c index 7b2403185..0ec90e805 100644 --- a/openssl/crypto/bn/bn_div.c +++ b/openssl/crypto/bn/bn_div.c @@ -189,15 +189,17 @@ int BN_div(BIGNUM *dv, BIGNUM *rm, const BIGNUM *num, const BIGNUM *divisor, int no_branch=0; /* Invalid zero-padding would have particularly bad consequences - * in the case of 'num', so don't just rely on bn_check_top() for this one + * so don't just rely on bn_check_top() here * (bn_check_top() works only for BN_DEBUG builds) */ - if (num->top > 0 && num->d[num->top - 1] == 0) + if ((num->top > 0 && num->d[num->top - 1] == 0) || + (divisor->top > 0 && divisor->d[divisor->top - 1] == 0)) { BNerr(BN_F_BN_DIV,BN_R_NOT_INITIALIZED); return 0; } bn_check_top(num); + bn_check_top(divisor); if ((BN_get_flags(num, BN_FLG_CONSTTIME) != 0) || (BN_get_flags(divisor, BN_FLG_CONSTTIME) != 0)) { @@ -207,7 +209,7 @@ int BN_div(BIGNUM *dv, BIGNUM *rm, const BIGNUM *num, const BIGNUM *divisor, bn_check_top(dv); bn_check_top(rm); /* bn_check_top(num); */ /* 'num' has been checked already */ - bn_check_top(divisor); + /* bn_check_top(divisor); */ /* 'divisor' has been checked already */ if (BN_is_zero(divisor)) { diff --git a/openssl/crypto/bn/bntest.c b/openssl/crypto/bn/bntest.c index 06f5954ac..48bc63384 100644 --- a/openssl/crypto/bn/bntest.c +++ b/openssl/crypto/bn/bntest.c @@ -107,6 +107,7 @@ int test_mod(BIO *bp,BN_CTX *ctx); int test_mod_mul(BIO *bp,BN_CTX *ctx); int test_mod_exp(BIO *bp,BN_CTX *ctx); int test_mod_exp_mont_consttime(BIO *bp,BN_CTX *ctx); +int test_mod_exp_mont5(BIO *bp, BN_CTX *ctx); int test_exp(BIO *bp,BN_CTX *ctx); int test_gf2m_add(BIO *bp); int test_gf2m_mod(BIO *bp); @@ -249,6 +250,7 @@ int main(int argc, char *argv[]) message(out,"BN_mod_exp_mont_consttime"); if (!test_mod_exp_mont_consttime(out,ctx)) goto err; + if (!test_mod_exp_mont5(out,ctx)) goto err; (void)BIO_flush(out); message(out,"BN_exp"); @@ -676,44 +678,98 @@ int test_mul(BIO *bp) int test_sqr(BIO *bp, BN_CTX *ctx) { - BIGNUM a,c,d,e; - int i; + BIGNUM *a,*c,*d,*e; + int i, ret = 0; - BN_init(&a); - BN_init(&c); - BN_init(&d); - BN_init(&e); + a = BN_new(); + c = BN_new(); + d = BN_new(); + e = BN_new(); + if (a == NULL || c == NULL || d == NULL || e == NULL) + { + goto err; + } for (i=0; i<num0; i++) { - BN_bntest_rand(&a,40+i*10,0,0); - a.neg=rand_neg(); - BN_sqr(&c,&a,ctx); + BN_bntest_rand(a,40+i*10,0,0); + a->neg=rand_neg(); + BN_sqr(c,a,ctx); if (bp != NULL) { if (!results) { - BN_print(bp,&a); + BN_print(bp,a); BIO_puts(bp," * "); - BN_print(bp,&a); + BN_print(bp,a); BIO_puts(bp," - "); } - BN_print(bp,&c); + BN_print(bp,c); BIO_puts(bp,"\n"); } - BN_div(&d,&e,&c,&a,ctx); - BN_sub(&d,&d,&a); - if(!BN_is_zero(&d) || !BN_is_zero(&e)) - { - fprintf(stderr,"Square test failed!\n"); - return 0; - } + BN_div(d,e,c,a,ctx); + BN_sub(d,d,a); + if(!BN_is_zero(d) || !BN_is_zero(e)) + { + fprintf(stderr,"Square test failed!\n"); + goto err; + } } - BN_free(&a); - BN_free(&c); - BN_free(&d); - BN_free(&e); - return(1); + + /* Regression test for a BN_sqr overflow bug. */ + BN_hex2bn(&a, + "80000000000000008000000000000001FFFFFFFFFFFFFFFE0000000000000000"); + BN_sqr(c, a, ctx); + if (bp != NULL) + { + if (!results) + { + BN_print(bp,a); + BIO_puts(bp," * "); + BN_print(bp,a); + BIO_puts(bp," - "); + } + BN_print(bp,c); + BIO_puts(bp,"\n"); + } + BN_mul(d, a, a, ctx); + if (BN_cmp(c, d)) + { + fprintf(stderr, "Square test failed: BN_sqr and BN_mul produce " + "different results!\n"); + goto err; + } + + /* Regression test for a BN_sqr overflow bug. */ + BN_hex2bn(&a, + "80000000000000000000000080000001FFFFFFFE000000000000000000000000"); + BN_sqr(c, a, ctx); + if (bp != NULL) + { + if (!results) + { + BN_print(bp,a); + BIO_puts(bp," * "); + BN_print(bp,a); + BIO_puts(bp," - "); + } + BN_print(bp,c); + BIO_puts(bp,"\n"); + } + BN_mul(d, a, a, ctx); + if (BN_cmp(c, d)) + { + fprintf(stderr, "Square test failed: BN_sqr and BN_mul produce " + "different results!\n"); + goto err; + } + ret = 1; +err: + if (a != NULL) BN_free(a); + if (c != NULL) BN_free(c); + if (d != NULL) BN_free(d); + if (e != NULL) BN_free(e); + return ret; } int test_mont(BIO *bp, BN_CTX *ctx) @@ -1012,6 +1068,80 @@ int test_mod_exp_mont_consttime(BIO *bp, BN_CTX *ctx) return(1); } +/* Test constant-time modular exponentiation with 1024-bit inputs, + * which on x86_64 cause a different code branch to be taken. + */ +int test_mod_exp_mont5(BIO *bp, BN_CTX *ctx) + { + BIGNUM *a,*p,*m,*d,*e; + + BN_MONT_CTX *mont; + + a=BN_new(); + p=BN_new(); + m=BN_new(); + d=BN_new(); + e=BN_new(); + + mont = BN_MONT_CTX_new(); + + BN_bntest_rand(m,1024,0,1); /* must be odd for montgomery */ + /* Zero exponent */ + BN_bntest_rand(a,1024,0,0); + BN_zero(p); + if(!BN_mod_exp_mont_consttime(d,a,p,m,ctx,NULL)) + return 0; + if(!BN_is_one(d)) + { + fprintf(stderr, "Modular exponentiation test failed!\n"); + return 0; + } + /* Zero input */ + BN_bntest_rand(p,1024,0,0); + BN_zero(a); + if(!BN_mod_exp_mont_consttime(d,a,p,m,ctx,NULL)) + return 0; + if(!BN_is_zero(d)) + { + fprintf(stderr, "Modular exponentiation test failed!\n"); + return 0; + } + /* Craft an input whose Montgomery representation is 1, + * i.e., shorter than the modulus m, in order to test + * the const time precomputation scattering/gathering. + */ + BN_one(a); + BN_MONT_CTX_set(mont,m,ctx); + if(!BN_from_montgomery(e,a,mont,ctx)) + return 0; + if(!BN_mod_exp_mont_consttime(d,e,p,m,ctx,NULL)) + return 0; + if(!BN_mod_exp_simple(a,e,p,m,ctx)) + return 0; + if(BN_cmp(a,d) != 0) + { + fprintf(stderr,"Modular exponentiation test failed!\n"); + return 0; + } + /* Finally, some regular test vectors. */ + BN_bntest_rand(e,1024,0,0); + if(!BN_mod_exp_mont_consttime(d,e,p,m,ctx,NULL)) + return 0; + if(!BN_mod_exp_simple(a,e,p,m,ctx)) + return 0; + if(BN_cmp(a,d) != 0) + { + fprintf(stderr,"Modular exponentiation test failed!\n"); + return 0; + } + BN_free(a); + BN_free(p); + BN_free(m); + BN_free(d); + BN_free(e); + return(1); + } + int test_exp(BIO *bp, BN_CTX *ctx) { BIGNUM *a,*b,*d,*e,*one; diff --git a/openssl/crypto/constant_time_locl.h b/openssl/crypto/constant_time_locl.h index c0483939f..8af98c168 100644 --- a/openssl/crypto/constant_time_locl.h +++ b/openssl/crypto/constant_time_locl.h @@ -129,17 +129,12 @@ static inline int constant_time_select_int(unsigned int mask, int a, int b); static inline unsigned int constant_time_msb(unsigned int a) { - return (unsigned int)((int)(a) >> (sizeof(int) * 8 - 1)); + return 0-(a >> (sizeof(a) * 8 - 1)); } static inline unsigned int constant_time_lt(unsigned int a, unsigned int b) { - unsigned int lt; - /* Case 1: msb(a) == msb(b). a < b iff the MSB of a - b is set.*/ - lt = ~(a ^ b) & (a - b); - /* Case 2: msb(a) != msb(b). a < b iff the MSB of b is set. */ - lt |= ~a & b; - return constant_time_msb(lt); + return constant_time_msb(a^((a^b)|((a-b)^b))); } static inline unsigned char constant_time_lt_8(unsigned int a, unsigned int b) @@ -149,12 +144,7 @@ static inline unsigned char constant_time_lt_8(unsigned int a, unsigned int b) static inline unsigned int constant_time_ge(unsigned int a, unsigned int b) { - unsigned int ge; - /* Case 1: msb(a) == msb(b). a >= b iff the MSB of a - b is not set.*/ - ge = ~((a ^ b) | (a - b)); - /* Case 2: msb(a) != msb(b). a >= b iff the MSB of a is set. */ - ge |= a & ~b; - return constant_time_msb(ge); + return ~constant_time_lt(a, b); } static inline unsigned char constant_time_ge_8(unsigned int a, unsigned int b) @@ -204,7 +194,7 @@ static inline unsigned char constant_time_select_8(unsigned char mask, return (unsigned char)(constant_time_select(mask, a, b)); } -inline int constant_time_select_int(unsigned int mask, int a, int b) +static inline int constant_time_select_int(unsigned int mask, int a, int b) { return (int)(constant_time_select(mask, (unsigned)(a), (unsigned)(b))); } diff --git a/openssl/crypto/cversion.c b/openssl/crypto/cversion.c index ea9f25fd1..0336adaa5 100644 --- a/openssl/crypto/cversion.c +++ b/openssl/crypto/cversion.c @@ -69,10 +69,7 @@ const char *SSLeay_version(int t) if (t == SSLEAY_BUILT_ON) { #ifdef DATE - static char buf[sizeof(DATE)+11]; - - BIO_snprintf(buf,sizeof buf,"built on: %s",DATE); - return(buf); + return(DATE); #else return("built on: date not available"); #endif @@ -80,10 +77,7 @@ const char *SSLeay_version(int t) if (t == SSLEAY_CFLAGS) { #ifdef CFLAGS - static char buf[sizeof(CFLAGS)+11]; - - BIO_snprintf(buf,sizeof buf,"compiler: %s",CFLAGS); - return(buf); + return(cflags); #else return("compiler: information not available"); #endif @@ -91,10 +85,7 @@ const char *SSLeay_version(int t) if (t == SSLEAY_PLATFORM) { #ifdef PLATFORM - static char buf[sizeof(PLATFORM)+11]; - - BIO_snprintf(buf,sizeof buf,"platform: %s", PLATFORM); - return(buf); + return(PLATFORM); #else return("platform: information not available"); #endif diff --git a/openssl/crypto/dsa/dsa_asn1.c b/openssl/crypto/dsa/dsa_asn1.c index 605853437..473af873e 100644 --- a/openssl/crypto/dsa/dsa_asn1.c +++ b/openssl/crypto/dsa/dsa_asn1.c @@ -176,13 +176,25 @@ int DSA_verify(int type, const unsigned char *dgst, int dgst_len, const unsigned char *sigbuf, int siglen, DSA *dsa) { DSA_SIG *s; + const unsigned char *p = sigbuf; + unsigned char *der = NULL; + int derlen = -1; int ret=-1; s = DSA_SIG_new(); if (s == NULL) return(ret); - if (d2i_DSA_SIG(&s,&sigbuf,siglen) == NULL) goto err; + if (d2i_DSA_SIG(&s,&p,siglen) == NULL) goto err; + /* Ensure signature uses DER and doesn't have trailing garbage */ + derlen = i2d_DSA_SIG(s, &der); + if (derlen != siglen || memcmp(sigbuf, der, derlen)) + goto err; ret=DSA_do_verify(dgst,dgst_len,s,dsa); err: + if (derlen > 0) + { + OPENSSL_cleanse(der, derlen); + OPENSSL_free(der); + } DSA_SIG_free(s); return(ret); } diff --git a/openssl/crypto/dso/dso_dlfcn.c b/openssl/crypto/dso/dso_dlfcn.c index 4a56aace0..faa9d76b4 100644 --- a/openssl/crypto/dso/dso_dlfcn.c +++ b/openssl/crypto/dso/dso_dlfcn.c @@ -60,10 +60,8 @@ that handle _GNU_SOURCE and other similar macros. Defining it later is simply too late, because those headers are protected from re- inclusion. */ -#ifdef __linux -# ifndef _GNU_SOURCE -# define _GNU_SOURCE /* make sure dladdr is declared */ -# endif +#ifndef _GNU_SOURCE +# define _GNU_SOURCE /* make sure dladdr is declared */ #endif #include <stdio.h> diff --git a/openssl/crypto/ec/ec_lib.c b/openssl/crypto/ec/ec_lib.c index e2c4741b5..0992c393b 100644 --- a/openssl/crypto/ec/ec_lib.c +++ b/openssl/crypto/ec/ec_lib.c @@ -68,7 +68,7 @@ #include "ec_lcl.h" -static const char EC_version[] = "EC" OPENSSL_VERSION_PTEXT; +const char EC_version[] = "EC" OPENSSL_VERSION_PTEXT; /* functions for EC_GROUP objects */ diff --git a/openssl/crypto/ec/ec_mult.c b/openssl/crypto/ec/ec_mult.c index 19f21675f..e81200b25 100644 --- a/openssl/crypto/ec/ec_mult.c +++ b/openssl/crypto/ec/ec_mult.c @@ -445,15 +445,16 @@ int ec_wNAF_mul(const EC_GROUP *group, EC_POINT *r, const BIGNUM *scalar, wNAF_len = OPENSSL_malloc(totalnum * sizeof wNAF_len[0]); wNAF = OPENSSL_malloc((totalnum + 1) * sizeof wNAF[0]); /* includes space for pivot */ val_sub = OPENSSL_malloc(totalnum * sizeof val_sub[0]); - + + /* Ensure wNAF is initialised in case we end up going to err */ + if (wNAF) wNAF[0] = NULL; /* preliminary pivot */ + if (!wsize || !wNAF_len || !wNAF || !val_sub) { ECerr(EC_F_EC_WNAF_MUL, ERR_R_MALLOC_FAILURE); goto err; } - wNAF[0] = NULL; /* preliminary pivot */ - /* num_val will be the total number of temporarily precomputed points */ num_val = 0; diff --git a/openssl/crypto/ec/ec_pmeth.c b/openssl/crypto/ec/ec_pmeth.c index 66ee397d8..b62b532cf 100644 --- a/openssl/crypto/ec/ec_pmeth.c +++ b/openssl/crypto/ec/ec_pmeth.c @@ -167,6 +167,7 @@ static int pkey_ec_verify(EVP_PKEY_CTX *ctx, return ret; } +#ifndef OPENSSL_NO_ECDH static int pkey_ec_derive(EVP_PKEY_CTX *ctx, unsigned char *key, size_t *keylen) { int ret; @@ -200,6 +201,7 @@ static int pkey_ec_derive(EVP_PKEY_CTX *ctx, unsigned char *key, size_t *keylen) *keylen = ret; return 1; } +#endif static int pkey_ec_ctrl(EVP_PKEY_CTX *ctx, int type, int p1, void *p2) { @@ -333,7 +335,11 @@ const EVP_PKEY_METHOD ec_pkey_meth = 0,0, 0, +#ifndef OPENSSL_NO_ECDH pkey_ec_derive, +#else + 0, +#endif pkey_ec_ctrl, pkey_ec_ctrl_str diff --git a/openssl/crypto/ec/ecp_nistp256.c b/openssl/crypto/ec/ecp_nistp256.c index 4bc0f5dce..b884f73d3 100644 --- a/openssl/crypto/ec/ecp_nistp256.c +++ b/openssl/crypto/ec/ecp_nistp256.c @@ -113,7 +113,6 @@ typedef u64 smallfelem[NLIMBS]; /* This is the value of the prime as four 64-bit words, little-endian. */ static const u64 kPrime[4] = { 0xfffffffffffffffful, 0xffffffff, 0, 0xffffffff00000001ul }; -static const limb bottom32bits = 0xffffffff; static const u64 bottom63bits = 0x7ffffffffffffffful; /* bin32_to_felem takes a little-endian byte array and converts it into felem diff --git a/openssl/crypto/ec/ectest.c b/openssl/crypto/ec/ectest.c index d1bf98059..8e4154d86 100644 --- a/openssl/crypto/ec/ectest.c +++ b/openssl/crypto/ec/ectest.c @@ -1366,7 +1366,7 @@ static const struct nistp_test_params nistp_tests_params[] = }, }; -void nistp_single_test(const struct nistp_test_params *test) +static void nistp_single_test(const struct nistp_test_params *test) { BN_CTX *ctx; BIGNUM *p, *a, *b, *x, *y, *n, *m, *order; @@ -1469,7 +1469,7 @@ void nistp_single_test(const struct nistp_test_params *test) BN_CTX_free(ctx); } -void nistp_tests() +static void nistp_tests() { unsigned i; diff --git a/openssl/crypto/ecdsa/Makefile b/openssl/crypto/ecdsa/Makefile index e89e0c010..60c876df1 100644 --- a/openssl/crypto/ecdsa/Makefile +++ b/openssl/crypto/ecdsa/Makefile @@ -126,15 +126,16 @@ ecs_sign.o: ../../include/openssl/safestack.h ../../include/openssl/sha.h ecs_sign.o: ../../include/openssl/stack.h ../../include/openssl/symhacks.h ecs_sign.o: ../../include/openssl/x509.h ../../include/openssl/x509_vfy.h ecs_sign.o: ecs_locl.h ecs_sign.c -ecs_vrf.o: ../../include/openssl/asn1.h ../../include/openssl/bio.h -ecs_vrf.o: ../../include/openssl/buffer.h ../../include/openssl/crypto.h -ecs_vrf.o: ../../include/openssl/e_os2.h ../../include/openssl/ec.h -ecs_vrf.o: ../../include/openssl/ecdh.h ../../include/openssl/ecdsa.h -ecs_vrf.o: ../../include/openssl/engine.h ../../include/openssl/evp.h +ecs_vrf.o: ../../e_os.h ../../include/openssl/asn1.h +ecs_vrf.o: ../../include/openssl/bio.h ../../include/openssl/buffer.h +ecs_vrf.o: ../../include/openssl/crypto.h ../../include/openssl/e_os2.h +ecs_vrf.o: ../../include/openssl/ec.h ../../include/openssl/ecdh.h +ecs_vrf.o: ../../include/openssl/ecdsa.h ../../include/openssl/engine.h +ecs_vrf.o: ../../include/openssl/err.h ../../include/openssl/evp.h ecs_vrf.o: ../../include/openssl/lhash.h ../../include/openssl/obj_mac.h ecs_vrf.o: ../../include/openssl/objects.h ../../include/openssl/opensslconf.h ecs_vrf.o: ../../include/openssl/opensslv.h ../../include/openssl/ossl_typ.h ecs_vrf.o: ../../include/openssl/pkcs7.h ../../include/openssl/safestack.h ecs_vrf.o: ../../include/openssl/sha.h ../../include/openssl/stack.h ecs_vrf.o: ../../include/openssl/symhacks.h ../../include/openssl/x509.h -ecs_vrf.o: ../../include/openssl/x509_vfy.h ecs_locl.h ecs_vrf.c +ecs_vrf.o: ../../include/openssl/x509_vfy.h ../cryptlib.h ecs_locl.h ecs_vrf.c diff --git a/openssl/crypto/ecdsa/ecs_vrf.c b/openssl/crypto/ecdsa/ecs_vrf.c index ef9acf7b6..2836efe5e 100644 --- a/openssl/crypto/ecdsa/ecs_vrf.c +++ b/openssl/crypto/ecdsa/ecs_vrf.c @@ -57,6 +57,7 @@ */ #include "ecs_locl.h" +#include "cryptlib.h" #ifndef OPENSSL_NO_ENGINE #include <openssl/engine.h> #endif @@ -84,13 +85,25 @@ int ECDSA_verify(int type, const unsigned char *dgst, int dgst_len, const unsigned char *sigbuf, int sig_len, EC_KEY *eckey) { ECDSA_SIG *s; + const unsigned char *p = sigbuf; + unsigned char *der = NULL; + int derlen = -1; int ret=-1; s = ECDSA_SIG_new(); if (s == NULL) return(ret); - if (d2i_ECDSA_SIG(&s, &sigbuf, sig_len) == NULL) goto err; + if (d2i_ECDSA_SIG(&s, &p, sig_len) == NULL) goto err; + /* Ensure signature uses DER and doesn't have trailing garbage */ + derlen = i2d_ECDSA_SIG(s, &der); + if (derlen != sig_len || memcmp(sigbuf, der, derlen)) + goto err; ret=ECDSA_do_verify(dgst, dgst_len, s, eckey); err: + if (derlen > 0) + { + OPENSSL_cleanse(der, derlen); + OPENSSL_free(der); + } ECDSA_SIG_free(s); return(ret); } diff --git a/openssl/crypto/engine/eng_dyn.c b/openssl/crypto/engine/eng_dyn.c index 807da7a5e..01db4556a 100644 --- a/openssl/crypto/engine/eng_dyn.c +++ b/openssl/crypto/engine/eng_dyn.c @@ -114,9 +114,6 @@ static const ENGINE_CMD_DEFN dynamic_cmd_defns[] = { ENGINE_CMD_FLAG_NO_INPUT}, {0, NULL, NULL, 0} }; -static const ENGINE_CMD_DEFN dynamic_cmd_defns_empty[] = { - {0, NULL, NULL, 0} - }; /* Loading code stores state inside the ENGINE structure via the "ex_data" * element. We load all our state into a single structure and use that as a diff --git a/openssl/crypto/evp/Makefile b/openssl/crypto/evp/Makefile index fa25bff6b..5d0c6b7db 100644 --- a/openssl/crypto/evp/Makefile +++ b/openssl/crypto/evp/Makefile @@ -383,7 +383,7 @@ evp_enc.o: ../../include/openssl/pkcs7.h ../../include/openssl/rand.h evp_enc.o: ../../include/openssl/safestack.h ../../include/openssl/sha.h evp_enc.o: ../../include/openssl/stack.h ../../include/openssl/symhacks.h evp_enc.o: ../../include/openssl/x509.h ../../include/openssl/x509_vfy.h -evp_enc.o: ../constant_time_locl.h ../cryptlib.h evp_enc.c evp_locl.h +evp_enc.o: ../cryptlib.h evp_enc.c evp_locl.h evp_err.o: ../../include/openssl/asn1.h ../../include/openssl/bio.h evp_err.o: ../../include/openssl/crypto.h ../../include/openssl/e_os2.h evp_err.o: ../../include/openssl/err.h ../../include/openssl/evp.h diff --git a/openssl/crypto/evp/e_des3.c b/openssl/crypto/evp/e_des3.c index 8d7b7de29..7e1e8b309 100644 --- a/openssl/crypto/evp/e_des3.c +++ b/openssl/crypto/evp/e_des3.c @@ -124,12 +124,11 @@ static int des_ede_cbc_cipher(EVP_CIPHER_CTX *ctx, unsigned char *out, #ifdef KSSL_DEBUG { int i; - char *cp; - printf("des_ede_cbc_cipher(ctx=%lx, buflen=%d)\n", ctx, ctx->buf_len); - printf("\t iv= "); + fprintf(stderr,"des_ede_cbc_cipher(ctx=%p, buflen=%d)\n", ctx, ctx->buf_len); + fprintf(stderr,"\t iv= "); for(i=0;i<8;i++) - printf("%02X",ctx->iv[i]); - printf("\n"); + fprintf(stderr,"%02X",ctx->iv[i]); + fprintf(stderr,"\n"); } #endif /* KSSL_DEBUG */ while (inl>=EVP_MAXCHUNK) @@ -260,11 +259,14 @@ static int des_ede3_init_key(EVP_CIPHER_CTX *ctx, const unsigned char *key, #ifdef KSSL_DEBUG { int i; - printf("des_ede3_init_key(ctx=%lx)\n", ctx); - printf("\tKEY= "); - for(i=0;i<24;i++) printf("%02X",key[i]); printf("\n"); - printf("\t IV= "); - for(i=0;i<8;i++) printf("%02X",iv[i]); printf("\n"); + fprintf(stderr,"des_ede3_init_key(ctx=%p)\n", ctx); + fprintf(stderr,"\tKEY= "); + for(i=0;i<24;i++) fprintf(stderr,"%02X",key[i]); fprintf(stderr,"\n"); + if (iv) + { + fprintf(stderr,"\t IV= "); + for(i=0;i<8;i++) fprintf(stderr,"%02X",iv[i]); fprintf(stderr,"\n"); + } } #endif /* KSSL_DEBUG */ diff --git a/openssl/crypto/evp/evp_enc.c b/openssl/crypto/evp/evp_enc.c index 7b1842a52..2e863ac54 100644 --- a/openssl/crypto/evp/evp_enc.c +++ b/openssl/crypto/evp/evp_enc.c @@ -67,7 +67,6 @@ #ifdef OPENSSL_FIPS #include <openssl/fips.h> #endif -#include "constant_time_locl.h" #include "evp_locl.h" #ifdef OPENSSL_FIPS @@ -501,21 +500,21 @@ int EVP_DecryptFinal(EVP_CIPHER_CTX *ctx, unsigned char *out, int *outl) int EVP_DecryptFinal_ex(EVP_CIPHER_CTX *ctx, unsigned char *out, int *outl) { - unsigned int i, b; - unsigned char pad, padding_good; + int i,n; + unsigned int b; *outl=0; if (ctx->cipher->flags & EVP_CIPH_FLAG_CUSTOM_CIPHER) { - int ret = M_do_cipher(ctx, out, NULL, 0); - if (ret < 0) + i = M_do_cipher(ctx, out, NULL, 0); + if (i < 0) return 0; else - *outl = ret; + *outl = i; return 1; } - b=(unsigned int)(ctx->cipher->block_size); + b=ctx->cipher->block_size; if (ctx->flags & EVP_CIPH_NO_PADDING) { if(ctx->buf_len) @@ -534,34 +533,33 @@ int EVP_DecryptFinal_ex(EVP_CIPHER_CTX *ctx, unsigned char *out, int *outl) return(0); } OPENSSL_assert(b <= sizeof ctx->final); - pad=ctx->final[b-1]; - - padding_good = (unsigned char)(~constant_time_is_zero_8(pad)); - padding_good &= constant_time_ge_8(b, pad); - - for (i = 1; i < b; ++i) - { - unsigned char is_pad_index = constant_time_lt_8(i, pad); - unsigned char pad_byte_good = constant_time_eq_8(ctx->final[b-i-1], pad); - padding_good &= constant_time_select_8(is_pad_index, pad_byte_good, 0xff); - } /* - * At least 1 byte is always padding, so we always write b - 1 - * bytes to avoid a timing leak. The caller is required to have |b| - * bytes space in |out| by the API contract. + * The following assumes that the ciphertext has been authenticated. + * Otherwise it provides a padding oracle. */ - for (i = 0; i < b - 1; ++i) - out[i] = ctx->final[i] & padding_good; - /* Safe cast: for a good padding, EVP_MAX_IV_LENGTH >= b >= pad */ - *outl = padding_good & ((unsigned char)(b - pad)); - return padding_good & 1; + n=ctx->final[b-1]; + if (n == 0 || n > (int)b) + { + EVPerr(EVP_F_EVP_DECRYPTFINAL_EX,EVP_R_BAD_DECRYPT); + return(0); + } + for (i=0; i<n; i++) + { + if (ctx->final[--b] != n) + { + EVPerr(EVP_F_EVP_DECRYPTFINAL_EX,EVP_R_BAD_DECRYPT); + return(0); + } + } + n=ctx->cipher->block_size-n; + for (i=0; i<n; i++) + out[i]=ctx->final[i]; + *outl=n; } else - { - *outl = 0; - return 1; - } + *outl=0; + return(1); } void EVP_CIPHER_CTX_free(EVP_CIPHER_CTX *ctx) diff --git a/openssl/crypto/md32_common.h b/openssl/crypto/md32_common.h index bb7381952..a75f136ca 100644 --- a/openssl/crypto/md32_common.h +++ b/openssl/crypto/md32_common.h @@ -225,8 +225,7 @@ #define HOST_c2l(c,l) (l =(((unsigned long)(*((c)++)))<<24), \ l|=(((unsigned long)(*((c)++)))<<16), \ l|=(((unsigned long)(*((c)++)))<< 8), \ - l|=(((unsigned long)(*((c)++))) ), \ - l) + l|=(((unsigned long)(*((c)++))) ) ) #endif #ifndef HOST_l2c #define HOST_l2c(l,c) (*((c)++)=(unsigned char)(((l)>>24)&0xff), \ @@ -262,8 +261,7 @@ #define HOST_c2l(c,l) (l =(((unsigned long)(*((c)++))) ), \ l|=(((unsigned long)(*((c)++)))<< 8), \ l|=(((unsigned long)(*((c)++)))<<16), \ - l|=(((unsigned long)(*((c)++)))<<24), \ - l) + l|=(((unsigned long)(*((c)++)))<<24) ) #endif #ifndef HOST_l2c #define HOST_l2c(l,c) (*((c)++)=(unsigned char)(((l) )&0xff), \ diff --git a/openssl/crypto/mem.c b/openssl/crypto/mem.c index 1cc62eafd..01052cfa3 100644 --- a/openssl/crypto/mem.c +++ b/openssl/crypto/mem.c @@ -255,10 +255,12 @@ void *CRYPTO_malloc_locked(int num, const char *file, int line) if (num <= 0) return NULL; - allow_customize = 0; + if(allow_customize) + allow_customize = 0; if (malloc_debug_func != NULL) { - allow_customize_debug = 0; + if(allow_customize_debug) + allow_customize_debug = 0; malloc_debug_func(NULL, num, file, line, 0); } ret = malloc_locked_ex_func(num,file,line); @@ -299,10 +301,12 @@ void *CRYPTO_malloc(int num, const char *file, int line) if (num <= 0) return NULL; - allow_customize = 0; + if(allow_customize) + allow_customize = 0; if (malloc_debug_func != NULL) { - allow_customize_debug = 0; + if(allow_customize_debug) + allow_customize_debug = 0; malloc_debug_func(NULL, num, file, line, 0); } ret = malloc_ex_func(num,file,line); diff --git a/openssl/crypto/objects/obj_xref.h b/openssl/crypto/objects/obj_xref.h index e23938c29..33cb24b07 100644 --- a/openssl/crypto/objects/obj_xref.h +++ b/openssl/crypto/objects/obj_xref.h @@ -43,9 +43,6 @@ static const nid_triple sigoid_srt[] = static const nid_triple * const sigoid_srt_xref[] = { - &sigoid_srt[29], - &sigoid_srt[17], - &sigoid_srt[18], &sigoid_srt[0], &sigoid_srt[1], &sigoid_srt[7], diff --git a/openssl/crypto/objects/objxref.pl b/openssl/crypto/objects/objxref.pl index 731d3ae22..6c4c832ab 100644 --- a/openssl/crypto/objects/objxref.pl +++ b/openssl/crypto/objects/objxref.pl @@ -90,7 +90,10 @@ EOF foreach (@srt2) { - my $x = $xref_tbl{$_}[2]; + my ($p1, $p2, $x) = @{$xref_tbl{$_}}; + # If digest or signature algorithm is "undef" then the algorithm + # needs special handling and is excluded from the cross reference table. + next if $p1 eq "undef" || $p2 eq "undef"; print "\t\&sigoid_srt\[$x\],\n"; } diff --git a/openssl/crypto/opensslv.h b/openssl/crypto/opensslv.h index f375967ef..0aebfd446 100644 --- a/openssl/crypto/opensslv.h +++ b/openssl/crypto/opensslv.h @@ -29,11 +29,11 @@ extern "C" { * (Prior to 0.9.5a beta1, a different scheme was used: MMNNFFRBB for * major minor fix final patch/beta) */ -#define OPENSSL_VERSION_NUMBER 0x100010afL +#define OPENSSL_VERSION_NUMBER 0x100010bfL #ifdef OPENSSL_FIPS -#define OPENSSL_VERSION_TEXT "OpenSSL 1.0.1j-fips 15 Oct 2014" +#define OPENSSL_VERSION_TEXT "OpenSSL 1.0.1k-fips 8 Jan 2015" #else -#define OPENSSL_VERSION_TEXT "OpenSSL 1.0.1j 15 Oct 2014" +#define OPENSSL_VERSION_TEXT "OpenSSL 1.0.1k 8 Jan 2015" #endif #define OPENSSL_VERSION_PTEXT " part of " OPENSSL_VERSION_TEXT diff --git a/openssl/crypto/sha/asm/sha1-mips.pl b/openssl/crypto/sha/asm/sha1-mips.pl index f1a702f38..197bc6b50 100644 --- a/openssl/crypto/sha/asm/sha1-mips.pl +++ b/openssl/crypto/sha/asm/sha1-mips.pl @@ -64,7 +64,7 @@ if ($flavour =~ /64|n32/i) { # ###################################################################### -$big_endian=(`echo MIPSEL | $ENV{CC} -E -P -`=~/MIPSEL/)?1:0; +$big_endian=(`echo MIPSEL | $ENV{CC} -E -`=~/MIPSEL/)?1:0 if ($ENV{CC}); for (@ARGV) { $output=$_ if (/^\w[\w\-]*\.\w+$/); } open STDOUT,">$output"; diff --git a/openssl/crypto/sha/asm/sha512-mips.pl b/openssl/crypto/sha/asm/sha512-mips.pl index ffa053bb7..6807a2c72 100644 --- a/openssl/crypto/sha/asm/sha512-mips.pl +++ b/openssl/crypto/sha/asm/sha512-mips.pl @@ -68,7 +68,7 @@ $pf = ($flavour =~ /nubi/i) ? $t0 : $t2; # ###################################################################### -$big_endian=(`echo MIPSEL | $ENV{CC} -E -P -`=~/MIPSEL/)?1:0; +$big_endian=(`echo MIPSEL | $ENV{CC} -E -`=~/MIPSEL/)?1:0 if ($ENV{CC}); for (@ARGV) { $output=$_ if (/^\w[\w\-]*\.\w+$/); } open STDOUT,">$output"; diff --git a/openssl/crypto/ts/ts_rsp_sign.c b/openssl/crypto/ts/ts_rsp_sign.c index b0f023c9d..2c0e94edd 100644 --- a/openssl/crypto/ts/ts_rsp_sign.c +++ b/openssl/crypto/ts/ts_rsp_sign.c @@ -977,7 +977,7 @@ TS_RESP_set_genTime_with_precision(ASN1_GENERALIZEDTIME *asn1_time, if (precision > 0) { /* Add fraction of seconds (leave space for dot and null). */ - BIO_snprintf(p, 2 + precision, ".%ld", usec); + BIO_snprintf(p, 2 + precision, ".%06ld", usec); /* We cannot use the snprintf return value, because it might have been truncated. */ p += strlen(p); diff --git a/openssl/crypto/x509/x509.h b/openssl/crypto/x509/x509.h index 092dd7450..ed767f84d 100644 --- a/openssl/crypto/x509/x509.h +++ b/openssl/crypto/x509/x509.h @@ -768,6 +768,7 @@ int X509_ALGOR_set0(X509_ALGOR *alg, ASN1_OBJECT *aobj, int ptype, void *pval); void X509_ALGOR_get0(ASN1_OBJECT **paobj, int *pptype, void **ppval, X509_ALGOR *algor); void X509_ALGOR_set_md(X509_ALGOR *alg, const EVP_MD *md); +int X509_ALGOR_cmp(const X509_ALGOR *a, const X509_ALGOR *b); X509_NAME *X509_NAME_dup(X509_NAME *xn); X509_NAME_ENTRY *X509_NAME_ENTRY_dup(X509_NAME_ENTRY *ne); diff --git a/openssl/crypto/x509/x509_vpm.c b/openssl/crypto/x509/x509_vpm.c index dfd89d89f..ba546bd1f 100644 --- a/openssl/crypto/x509/x509_vpm.c +++ b/openssl/crypto/x509/x509_vpm.c @@ -89,6 +89,8 @@ X509_VERIFY_PARAM *X509_VERIFY_PARAM_new(void) { X509_VERIFY_PARAM *param; param = OPENSSL_malloc(sizeof(X509_VERIFY_PARAM)); + if (!param) + return NULL; memset(param, 0, sizeof(X509_VERIFY_PARAM)); x509_verify_param_zero(param); return param; diff --git a/openssl/crypto/x509/x_all.c b/openssl/crypto/x509/x_all.c index e06602d65..fef55f89d 100644 --- a/openssl/crypto/x509/x_all.c +++ b/openssl/crypto/x509/x_all.c @@ -72,6 +72,8 @@ int X509_verify(X509 *a, EVP_PKEY *r) { + if (X509_ALGOR_cmp(a->sig_alg, a->cert_info->signature)) + return 0; return(ASN1_item_verify(ASN1_ITEM_rptr(X509_CINF),a->sig_alg, a->signature,a->cert_info,r)); } diff --git a/openssl/doc/HOWTO/certificates.txt b/openssl/doc/HOWTO/certificates.txt index a8a34c7ab..65f8fc829 100644 --- a/openssl/doc/HOWTO/certificates.txt +++ b/openssl/doc/HOWTO/certificates.txt @@ -3,22 +3,22 @@ 1. Introduction -How you handle certificates depend a great deal on what your role is. +How you handle certificates depends a great deal on what your role is. Your role can be one or several of: - - User of some client software - - User of some server software + - User of some client application + - User of some server application - Certificate authority This file is for users who wish to get a certificate of their own. -Certificate authorities should read ca.txt. +Certificate authorities should read https://www.openssl.org/docs/apps/ca.html. In all the cases shown below, the standard configuration file, as compiled into openssl, will be used. You may find it in /etc/, -/usr/local/ssl/ or somewhere else. The name is openssl.cnf, and -is better described in another HOWTO <config.txt?>. If you want to -use a different configuration file, use the argument '-config {file}' -with the command shown below. +/usr/local/ssl/ or somewhere else. By default the file is named +openssl.cnf and is described at https://www.openssl.org/docs/apps/config.html. +You can specify a different configuration file using the +'-config {file}' argument with the commands shown below. 2. Relationship with keys @@ -29,24 +29,26 @@ somewhere. With OpenSSL, public keys are easily derived from private keys, so before you create a certificate or a certificate request, you need to create a private key. -Private keys are generated with 'openssl genrsa' if you want a RSA -private key, or 'openssl gendsa' if you want a DSA private key. -Further information on how to create private keys can be found in -another HOWTO <keys.txt?>. The rest of this text assumes you have -a private key in the file privkey.pem. +Private keys are generated with 'openssl genrsa -out privkey.pem' if +you want a RSA private key, or if you want a DSA private key: +'openssl dsaparam -out dsaparam.pem 2048; openssl gendsa -out privkey.pem dsaparam.pem'. + +The private keys created by these commands are not passphrase protected; +it might or might not be the desirable thing. Further information on how to +create private keys can be found at https://www.openssl.org/docs/HOWTO/keys.txt. +The rest of this text assumes you have a private key in the file privkey.pem. 3. Creating a certificate request -To create a certificate, you need to start with a certificate -request (or, as some certificate authorities like to put -it, "certificate signing request", since that's exactly what they do, -they sign it and give you the result back, thus making it authentic -according to their policies). A certificate request can then be sent -to a certificate authority to get it signed into a certificate, or if -you have your own certificate authority, you may sign it yourself, or -if you need a self-signed certificate (because you just want a test -certificate or because you are setting up your own CA). +To create a certificate, you need to start with a certificate request +(or, as some certificate authorities like to put it, "certificate +signing request", since that's exactly what they do, they sign it and +give you the result back, thus making it authentic according to their +policies). A certificate request is sent to a certificate authority +to get it signed into a certificate. You can also sign the certificate +yourself if you have your own certificate authority or create a +self-signed certificate (typically for testing purpose). The certificate request is created like this: @@ -55,12 +57,14 @@ The certificate request is created like this: Now, cert.csr can be sent to the certificate authority, if they can handle files in PEM format. If not, use the extra argument '-outform' followed by the keyword for the format to use (see another HOWTO -<formats.txt?>). In some cases, that isn't sufficient and you will -have to be more creative. +<formats.txt?>). In some cases, -outform does not let you output the +certificate request in the right format and you will have to use one +of the various other commands that are exposed by openssl (or get +creative and use a combination of tools). -When the certificate authority has then done the checks the need to -do (and probably gotten payment from you), they will hand over your -new certificate to you. +The certificate authority performs various checks (according to their +policies) and usually waits for payment from you. Once that is +complete, they send you your new certificate. Section 5 will tell you more on how to handle the certificate you received. @@ -68,11 +72,12 @@ received. 4. Creating a self-signed test certificate -If you don't want to deal with another certificate authority, or just -want to create a test certificate for yourself. This is similar to -creating a certificate request, but creates a certificate instead of -a certificate request. This is NOT the recommended way to create a -CA certificate, see ca.txt. +You can create a self-signed certificate if you don't want to deal +with a certificate authority, or if you just want to create a test +certificate for yourself. This is similar to creating a certificate +request, but creates a certificate instead of a certificate request. +This is NOT the recommended way to create a CA certificate, see +https://www.openssl.org/docs/apps/ca.html. openssl req -new -x509 -key privkey.pem -out cacert.pem -days 1095 @@ -93,13 +98,13 @@ certificate and your key to various formats, most often also putting them together into one file. The ways to do this is described in another HOWTO <formats.txt?>, I will just mention the simplest case. In the case of a raw DER thing in PEM format, and assuming that's all -right for yor applications, simply concatenating the certificate and +right for your applications, simply concatenating the certificate and the key into a new file and using that one should be enough. With some applications, you don't even have to do that. -By now, you have your cetificate and your private key and can start -using the software that depend on it. +By now, you have your certificate and your private key and can start +using applications that depend on it. -- Richard Levitte diff --git a/openssl/doc/HOWTO/proxy_certificates.txt b/openssl/doc/HOWTO/proxy_certificates.txt index f98ec3607..d78be2f14 100644 --- a/openssl/doc/HOWTO/proxy_certificates.txt +++ b/openssl/doc/HOWTO/proxy_certificates.txt @@ -1,74 +1,69 @@ -<DRAFT!> HOWTO proxy certificates 0. WARNING -NONE OF THE CODE PRESENTED HERE HAVE BEEN CHECKED! They are just an -example to show you how things can be done. There may be typos or -type conflicts, and you will have to resolve them. +NONE OF THE CODE PRESENTED HERE HAS BEEN CHECKED! The code is just examples to +show you how things could be done. There might be typos or type conflicts, and +you will have to resolve them. 1. Introduction -Proxy certificates are defined in RFC 3820. They are really usual -certificates with the mandatory extension proxyCertInfo. +Proxy certificates are defined in RFC 3820. They are really usual certificates +with the mandatory extension proxyCertInfo. -Proxy certificates are issued by an End Entity (typically a user), -either directly with the EE certificate as issuing certificate, or by -extension through an already issued proxy certificate.. They are used -to extend rights to some other entity (a computer process, typically, -or sometimes to the user itself), so it can perform operations in the -name of the owner of the EE certificate. +Proxy certificates are issued by an End Entity (typically a user), either +directly with the EE certificate as issuing certificate, or by extension through +an already issued proxy certificate. Proxy certificates are used to extend +rights to some other entity (a computer process, typically, or sometimes to the +user itself). This allows the entity to perform operations on behalf of the +owner of the EE certificate. See http://www.ietf.org/rfc/rfc3820.txt for more information. 2. A warning about proxy certificates -Noone seems to have tested proxy certificates with security in mind. -Basically, to this date, it seems that proxy certificates have only -been used in a world that's highly aware of them. What would happen -if an unsuspecting application is to validate a chain of certificates -that contains proxy certificates? It would usually consider the leaf -to be the certificate to check for authorisation data, and since proxy -certificates are controlled by the EE certificate owner alone, it's -would be normal to consider what the EE certificate owner could do -with them. +No one seems to have tested proxy certificates with security in mind. To this +date, it seems that proxy certificates have only been used in a context highly +aware of them. -subjectAltName and issuerAltName are forbidden in proxy certificates, -and this is enforced in OpenSSL. The subject must be the same as the -issuer, with one commonName added on. +Existing applications might misbehave when trying to validate a chain of +certificates which use a proxy certificate. They might incorrectly consider the +leaf to be the certificate to check for authorisation data, which is controlled +by the EE certificate owner. -Possible threats are, as far as has been imagined so far: +subjectAltName and issuerAltName are forbidden in proxy certificates, and this +is enforced in OpenSSL. The subject must be the same as the issuer, with one +commonName added on. + +Possible threats we can think of at this time include: - impersonation through commonName (think server certificates). - - use of additional extensions, possibly non-standard ones used in - certain environments, that would grant extra or different - authorisation rights. + - use of additional extensions, possibly non-standard ones used in certain + environments, that would grant extra or different authorisation rights. + +For these reasons, OpenSSL requires that the use of proxy certificates be +explicitly allowed. Currently, this can be done using the following methods: -For this reason, OpenSSL requires that the use of proxy certificates -be explicitely allowed. Currently, this can be done using the -following methods: + - if the application directly calls X509_verify_cert(), it can first call: - - if the application calls X509_verify_cert() itself, it can do the - following prior to that call (ctx is the pointer passed in the call - to X509_verify_cert()): + X509_STORE_CTX_set_flags(ctx, X509_V_FLAG_ALLOW_PROXY_CERTS); - X509_STORE_CTX_set_flags(ctx, X509_V_FLAG_ALLOW_PROXY_CERTS); + Where ctx is the pointer which then gets passed to X509_verify_cert(). - - in all other cases, proxy certificate validation can be enabled - before starting the application by setting the envirnoment variable - OPENSSL_ALLOW_PROXY_CERTS with some non-empty value. + - proxy certificate validation can be enabled before starting the application + by setting the environment variable OPENSSL_ALLOW_PROXY_CERTS. -There are thoughts to allow proxy certificates with a line in the -default openssl.cnf, but that's still in the future. +In the future, it might be possible to enable proxy certificates by editing +openssl.cnf. -3. How to create proxy cerificates +3. How to create proxy certificates -It's quite easy to create proxy certificates, by taking advantage of -the lack of checks of the 'openssl x509' application (*ahem*). But -first, you need to create a configuration section that contains a -definition of the proxyCertInfo extension, a little like this: +Creating proxy certificates is quite easy, by taking advantage of a lack of +checks in the 'openssl x509' application (*ahem*). You must first create a +configuration section that contains a definition of the proxyCertInfo extension, +for example: [ v3_proxy ] # A proxy certificate MUST NEVER be a CA certificate. @@ -77,10 +72,10 @@ definition of the proxyCertInfo extension, a little like this: # Usual authority key ID authorityKeyIdentifier=keyid,issuer:always - # Now, for the extension that marks this certificate as a proxy one + # The extension which marks this certificate as a proxy proxyCertInfo=critical,language:id-ppl-anyLanguage,pathlen:1,policy:text:AB -It's also possible to give the proxy extension in a separate section: +It's also possible to specify the proxy extension in a separate section: proxyCertInfo=critical,@proxy_ext @@ -89,96 +84,85 @@ It's also possible to give the proxy extension in a separate section: pathlen=0 policy=text:BC -The policy value has a specific syntax, {syntag}:{string}, where the -syntag determines what will be done with the string. The recognised -syntags are as follows: - - text indicates that the string is simply the bytes, not - encoded in any kind of way: +The policy value has a specific syntax, {syntag}:{string}, where the syntag +determines what will be done with the string. The following syntags are +recognised: - policy=text:räksmörgås + text indicates that the string is simply bytes, without any encoding: - Previous versions of this design had a specific tag - for UTF-8 text. However, since the bytes are copied - as-is anyway, there's no need for it. Instead, use - the text: tag, like this: + policy=text:räksmörgÃ¥s - policy=text:räksmörgÃ¥s + Previous versions of this design had a specific tag for UTF-8 text. + However, since the bytes are copied as-is anyway, there is no need for + such a specific tag. - hex indicates the string is encoded in hex, with colons - between each byte (every second hex digit): + hex indicates the string is encoded in hex, with colons between each byte + (every second hex digit): - policy=hex:72:E4:6B:73:6D:F6:72:67:E5:73 + policy=hex:72:E4:6B:73:6D:F6:72:67:E5:73 - Previous versions of this design had a tag to insert a - complete DER blob. However, the only legal use for - this would be to surround the bytes that would go with - the hex: tag with what's needed to construct a correct - OCTET STRING. Since hex: does that, the DER tag felt - superfluous, and was therefore removed. + Previous versions of this design had a tag to insert a complete DER + blob. However, the only legal use for this would be to surround the + bytes that would go with the hex: tag with whatever is needed to + construct a correct OCTET STRING. The DER tag therefore felt + superfluous, and was removed. - file indicates that the text of the policy should really be - taken from a file. The string is then really a file - name. This is useful for policies that are large - (more than a few of lines) XML documents, for example. + file indicates that the text of the policy should really be taken from a + file. The string is then really a file name. This is useful for + policies that are large (more than a few lines, e.g. XML documents). The 'policy' setting can be split up in multiple lines like this: 0.policy=This is - 1.polisy= a multi- + 1.policy= a multi- 2.policy=line policy. -NOTE: the proxy policy value is the part that determines the rights -granted to the process using the proxy certificate. The value is -completely dependent on the application reading and interpretting it! +NOTE: the proxy policy value is the part which determines the rights granted to +the process using the proxy certificate. The value is completely dependent on +the application reading and interpreting it! -Now that you have created an extension section for your proxy -certificate, you can now easily create a proxy certificate like this: +Now that you have created an extension section for your proxy certificate, you +can easily create a proxy certificate by doing: - openssl req -new -config openssl.cnf \ - -out proxy.req -keyout proxy.key - openssl x509 -req -CAcreateserial -in proxy.req -days 7 \ - -out proxy.crt -CA user.crt -CAkey user.key \ - -extfile openssl.cnf -extensions v3_proxy + openssl req -new -config openssl.cnf -out proxy.req -keyout proxy.key + openssl x509 -req -CAcreateserial -in proxy.req -days 7 -out proxy.crt \ + -CA user.crt -CAkey user.key -extfile openssl.cnf -extensions v3_proxy -It's just as easy to create a proxy certificate using another proxy -certificate as issuer (note that I'm using a different configuration -section for it): +You can also create a proxy certificate using another proxy certificate as +issuer (note: I'm using a different configuration section for it): - openssl req -new -config openssl.cnf \ - -out proxy2.req -keyout proxy2.key - openssl x509 -req -CAcreateserial -in proxy2.req -days 7 \ - -out proxy2.crt -CA proxy.crt -CAkey proxy.key \ - -extfile openssl.cnf -extensions v3_proxy2 + openssl req -new -config openssl.cnf -out proxy2.req -keyout proxy2.key + openssl x509 -req -CAcreateserial -in proxy2.req -days 7 -out proxy2.crt \ + -CA proxy.crt -CAkey proxy.key -extfile openssl.cnf -extensions v3_proxy2 4. How to have your application interpret the policy? -The basic way to interpret proxy policies is to prepare some default -rights, then do a check of the proxy certificate against the a chain -of proxy certificates, user certificate and CA certificates, and see -what rights came out by the end. Sounds easy, huh? It almost is. +The basic way to interpret proxy policies is to start with some default rights, +then compute the resulting rights by checking the proxy certificate against +the chain of proxy certificates, user certificate and CA certificates. You then +use the final computed rights. Sounds easy, huh? It almost is. -The slightly complicated part is how to pass data between your +The slightly complicated part is figuring out how to pass data between your application and the certificate validation procedure. You need the following ingredients: - - a callback routing that will be called for every certificate that's - validated. It will be called several times for each certificates, - so you must be attentive to when it's a good time to do the proxy - policy interpretation and check, as well as to fill in the defaults - when the EE certificate is checked. + - a callback function that will be called for every certificate being + validated. The callback be called several times for each certificate, + so you must be careful to do the proxy policy interpretation at the right + time. You also need to fill in the defaults when the EE certificate is + checked. - - a structure of data that's shared between your application code and - the callback. + - a data structure that is shared between your application code and the + callback. - a wrapper function that sets it all up. - - an ex_data index function that creates an index into the generic - ex_data store that's attached to an X509 validation context. + - an ex_data index function that creates an index into the generic ex_data + store that is attached to an X509 validation context. -This is some cookbook code for you to fill in: +Here is some skeleton code you can fill in: /* In this example, I will use a view of granted rights as a bit array, one bit for each possible right. */ @@ -210,7 +194,7 @@ This is some cookbook code for you to fill in: static int verify_callback(int ok, X509_STORE_CTX *ctx) { if (ok == 1) /* It's REALLY important you keep the proxy policy - check within this secion. It's important to know + check within this section. It's important to know that when ok is 1, the certificates are checked from top to bottom. You get the CA root first, followed by the possible chain of intermediate @@ -221,7 +205,7 @@ This is some cookbook code for you to fill in: if (xs->ex_flags & EXFLAG_PROXY) { - YOUR_RIGHTS *rights = + YOUR_RIGHTS *rights = (YOUR_RIGHTS *)X509_STORE_CTX_get_ex_data(ctx, get_proxy_auth_ex_data_idx()); PROXY_CERT_INFO_EXTENSION *pci = @@ -250,12 +234,12 @@ This is some cookbook code for you to fill in: bit array and fill it with the rights granted by the current proxy certificate, then use it as a mask on the accumulated rights bit array, and - voilà, you now have a new accumulated rights bit + voilà , you now have a new accumulated rights bit array. */ { int i; YOUR_RIGHTS tmp_rights; - memset(tmp_rights.rights, 0, sizeof(tmp_rights.rights)); + memset(tmp_rights.rights, 0, sizeof(tmp_rights.rights)); /* process_rights() is supposed to be a procedure that takes a string and it's length, interprets @@ -276,7 +260,7 @@ This is some cookbook code for you to fill in: { /* We have a EE certificate, let's use it to set default! */ - YOUR_RIGHTS *rights = + YOUR_RIGHTS *rights = (YOUR_RIGHTS *)X509_STORE_CTX_get_ex_data(ctx, get_proxy_auth_ex_data_idx()); diff --git a/openssl/doc/apps/dgst.pod b/openssl/doc/apps/dgst.pod index 2414c5337..9e15798d8 100644 --- a/openssl/doc/apps/dgst.pod +++ b/openssl/doc/apps/dgst.pod @@ -13,6 +13,8 @@ B<openssl> B<dgst> [B<-hex>] [B<-binary>] [B<-r>] +[B<-hmac arg>] +[B<-non-fips-allow>] [B<-out filename>] [B<-sign filename>] [B<-keyform arg>] @@ -62,6 +64,15 @@ output the digest or signature in binary form. output the digest in the "coreutils" format used by programs like B<sha1sum>. +=item B<-hmac arg> + +set the HMAC key to "arg". + +=item B<-non-fips-allow> + +Allow use of non FIPS digest when in FIPS mode. This has no effect when not in +FIPS mode. + =item B<-out filename> filename to output to, or standard output by default. diff --git a/openssl/doc/apps/ocsp.pod b/openssl/doc/apps/ocsp.pod index af2e12e41..38f026afc 100644 --- a/openssl/doc/apps/ocsp.pod +++ b/openssl/doc/apps/ocsp.pod @@ -133,6 +133,10 @@ if the B<host> option is present then the OCSP request is sent to the host B<hostname> on port B<port>. B<path> specifies the HTTP path name to use or "/" by default. +=item B<-timeout seconds> + +connection timeout to the OCSP responder in seconds + =item B<-CAfile file>, B<-CApath pathname> file or pathname containing trusted CA certificates. These are used to verify diff --git a/openssl/doc/crypto/EVP_EncryptInit.pod b/openssl/doc/crypto/EVP_EncryptInit.pod index 4e22edcd6..ed027b387 100644 --- a/openssl/doc/crypto/EVP_EncryptInit.pod +++ b/openssl/doc/crypto/EVP_EncryptInit.pod @@ -115,7 +115,7 @@ writes the encrypted version to B<out>. This function can be called multiple times to encrypt successive blocks of data. The amount of data written depends on the block alignment of the encrypted data: as a result the amount of data written may be anything from zero bytes -to (inl + cipher_block_size - 1) so B<outl> should contain sufficient +to (inl + cipher_block_size - 1) so B<out> should contain sufficient room. The actual number of bytes written is placed in B<outl>. If padding is enabled (the default) then EVP_EncryptFinal_ex() encrypts diff --git a/openssl/doc/crypto/EVP_PKEY_encrypt.pod b/openssl/doc/crypto/EVP_PKEY_encrypt.pod index e495a8124..6799ce101 100644 --- a/openssl/doc/crypto/EVP_PKEY_encrypt.pod +++ b/openssl/doc/crypto/EVP_PKEY_encrypt.pod @@ -43,19 +43,23 @@ indicates the operation is not supported by the public key algorithm. =head1 EXAMPLE -Encrypt data using OAEP (for RSA keys): +Encrypt data using OAEP (for RSA keys). See also L<PEM_read_PUBKEY(3)|pem(3)> or +L<d2i_X509(3)|d2i_X509(3)> for means to load a public key. You may also simply +set 'eng = NULL;' to start with the default OpenSSL RSA implementation: #include <openssl/evp.h> #include <openssl/rsa.h> + #include <openssl/engine.h> EVP_PKEY_CTX *ctx; + ENGINE *eng; unsigned char *out, *in; size_t outlen, inlen; EVP_PKEY *key; - /* NB: assumes key in, inlen are already set up + /* NB: assumes eng, key, in, inlen are already set up, * and that key is an RSA public key */ - ctx = EVP_PKEY_CTX_new(key); + ctx = EVP_PKEY_CTX_new(key,eng); if (!ctx) /* Error occurred */ if (EVP_PKEY_encrypt_init(ctx) <= 0) @@ -79,6 +83,8 @@ Encrypt data using OAEP (for RSA keys): =head1 SEE ALSO +L<d2i_X509(3)|d2i_X509(3)>, +L<engine(3)|engine(3)>, L<EVP_PKEY_CTX_new(3)|EVP_PKEY_CTX_new(3)>, L<EVP_PKEY_decrypt(3)|EVP_PKEY_decrypt(3)>, L<EVP_PKEY_sign(3)|EVP_PKEY_sign(3)>, diff --git a/openssl/doc/crypto/X509_NAME_add_entry_by_txt.pod b/openssl/doc/crypto/X509_NAME_add_entry_by_txt.pod index 1afd008cb..043766cc4 100644 --- a/openssl/doc/crypto/X509_NAME_add_entry_by_txt.pod +++ b/openssl/doc/crypto/X509_NAME_add_entry_by_txt.pod @@ -81,14 +81,14 @@ Create an B<X509_NAME> structure: nm = X509_NAME_new(); if (nm == NULL) /* Some error */ - if (!X509_NAME_add_entry_by_txt(nm, MBSTRING_ASC, - "C", "UK", -1, -1, 0)) + if (!X509_NAME_add_entry_by_txt(nm, "C", MBSTRING_ASC, + "UK", -1, -1, 0)) /* Error */ - if (!X509_NAME_add_entry_by_txt(nm, MBSTRING_ASC, - "O", "Disorganized Organization", -1, -1, 0)) + if (!X509_NAME_add_entry_by_txt(nm, "O", MBSTRING_ASC, + "Disorganized Organization", -1, -1, 0)) /* Error */ - if (!X509_NAME_add_entry_by_txt(nm, MBSTRING_ASC, - "CN", "Joe Bloggs", -1, -1, 0)) + if (!X509_NAME_add_entry_by_txt(nm, "CN", MBSTRING_ASC, + "Joe Bloggs", -1, -1, 0)) /* Error */ =head1 RETURN VALUES diff --git a/openssl/doc/crypto/X509_NAME_get_index_by_NID.pod b/openssl/doc/crypto/X509_NAME_get_index_by_NID.pod index 3b1f9ff43..c8a812879 100644 --- a/openssl/doc/crypto/X509_NAME_get_index_by_NID.pod +++ b/openssl/doc/crypto/X509_NAME_get_index_by_NID.pod @@ -59,6 +59,10 @@ X509_NAME_get_index_by_OBJ() should be used followed by X509_NAME_get_entry() on any matching indices and then the various B<X509_NAME_ENTRY> utility functions on the result. +The list of all relevant B<NID_*> and B<OBJ_* codes> can be found in +the source code header files E<lt>openssl/obj_mac.hE<gt> and/or +E<lt>openssl/objects.hE<gt>. + =head1 EXAMPLES Process all entries: diff --git a/openssl/doc/ssl/SSL_CTX_set_mode.pod b/openssl/doc/ssl/SSL_CTX_set_mode.pod index 8cb669dae..2a5aaa555 100644 --- a/openssl/doc/ssl/SSL_CTX_set_mode.pod +++ b/openssl/doc/ssl/SSL_CTX_set_mode.pod @@ -71,6 +71,16 @@ SSL_CTX->freelist_max_len, which defaults to 32. Using this flag can save around 34k per idle SSL connection. This flag has no effect on SSL v2 connections, or on DTLS connections. +=item SSL_MODE_SEND_FALLBACK_SCSV + +Send TLS_FALLBACK_SCSV in the ClientHello. +To be set only by applications that reconnect with a downgraded protocol +version; see draft-ietf-tls-downgrade-scsv-00 for details. + +DO NOT ENABLE THIS if your application attempts a normal handshake. +Only use this in explicit fallback retries, following the guidance +in draft-ietf-tls-downgrade-scsv-00. + =back =head1 RETURN VALUES diff --git a/openssl/doc/ssl/SSL_CTX_set_options.pod b/openssl/doc/ssl/SSL_CTX_set_options.pod index 6e6b5e6d8..e80a72cd4 100644 --- a/openssl/doc/ssl/SSL_CTX_set_options.pod +++ b/openssl/doc/ssl/SSL_CTX_set_options.pod @@ -158,15 +158,7 @@ temporary/ephemeral DH parameters are used. =item SSL_OP_EPHEMERAL_RSA -Always use ephemeral (temporary) RSA key when doing RSA operations -(see L<SSL_CTX_set_tmp_rsa_callback(3)|SSL_CTX_set_tmp_rsa_callback(3)>). -According to the specifications this is only done, when a RSA key -can only be used for signature operations (namely under export ciphers -with restricted RSA keylength). By setting this option, ephemeral -RSA keys are always used. This option breaks compatibility with the -SSL/TLS specifications and may lead to interoperability problems with -clients and should therefore never be used. Ciphers with EDH (ephemeral -Diffie-Hellman) key exchange should be used instead. +This option is no longer implemented and is treated as no op. =item SSL_OP_CIPHER_SERVER_PREFERENCE diff --git a/openssl/doc/ssl/SSL_CTX_set_tmp_rsa_callback.pod b/openssl/doc/ssl/SSL_CTX_set_tmp_rsa_callback.pod index 534643cd9..8794eb7ac 100644 --- a/openssl/doc/ssl/SSL_CTX_set_tmp_rsa_callback.pod +++ b/openssl/doc/ssl/SSL_CTX_set_tmp_rsa_callback.pod @@ -74,21 +74,14 @@ exchange and use EDH (Ephemeral Diffie-Hellman) key exchange instead in order to achieve forward secrecy (see L<SSL_CTX_set_tmp_dh_callback(3)|SSL_CTX_set_tmp_dh_callback(3)>). -On OpenSSL servers ephemeral RSA key exchange is therefore disabled by default -and must be explicitly enabled using the SSL_OP_EPHEMERAL_RSA option of -L<SSL_CTX_set_options(3)|SSL_CTX_set_options(3)>, violating the TLS/SSL -standard. When ephemeral RSA key exchange is required for export ciphers, -it will automatically be used without this option! - -An application may either directly specify the key or can supply the key via -a callback function. The callback approach has the advantage, that the -callback may generate the key only in case it is actually needed. As the -generation of a RSA key is however costly, it will lead to a significant -delay in the handshake procedure. Another advantage of the callback function -is that it can supply keys of different size (e.g. for SSL_OP_EPHEMERAL_RSA -usage) while the explicit setting of the key is only useful for key size of -512 bits to satisfy the export restricted ciphers and does give away key length -if a longer key would be allowed. +An application may either directly specify the key or can supply the key via a +callback function. The callback approach has the advantage, that the callback +may generate the key only in case it is actually needed. As the generation of a +RSA key is however costly, it will lead to a significant delay in the handshake +procedure. Another advantage of the callback function is that it can supply +keys of different size while the explicit setting of the key is only useful for +key size of 512 bits to satisfy the export restricted ciphers and does give +away key length if a longer key would be allowed. The B<tmp_rsa_callback> is called with the B<keylength> needed and the B<is_export> information. The B<is_export> flag is set, when the diff --git a/openssl/e_os.h b/openssl/e_os.h index 733155e48..832272e98 100644 --- a/openssl/e_os.h +++ b/openssl/e_os.h @@ -290,7 +290,7 @@ extern "C" { # ifdef _WIN64 # define strlen(s) _strlen31(s) /* cut strings to 2GB */ -static unsigned int _strlen31(const char *str) +static __inline unsigned int _strlen31(const char *str) { unsigned int len=0; while (*str && len<0x80000000U) str++, len++; @@ -375,15 +375,6 @@ static unsigned int _strlen31(const char *str) # define check_winnt() (GetVersion() < 0x80000000) #endif -/* - * Visual Studio: inline is available in C++ only, however - * __inline is available for C, see - * http://msdn.microsoft.com/en-us/library/z8y1yy88.aspx - */ -#if defined(_MSC_VER) && !defined(__cplusplus) && !defined(inline) -# define inline __inline -#endif - #else /* The non-microsoft world */ # ifdef OPENSSL_SYS_VMS @@ -741,6 +732,22 @@ struct servent *getservbyname(const char *name, const char *proto); #include <OS.h> #endif +#if !defined(inline) && !defined(__cplusplus) +# if defined(__STDC_VERSION__) && __STDC_VERSION__>=199901L + /* do nothing, inline works */ +# elif defined(__GNUC__) && __GNUC__>=2 +# define inline __inline__ +# elif defined(_MSC_VER) + /* + * Visual Studio: inline is available in C++ only, however + * __inline is available for C, see + * http://msdn.microsoft.com/en-us/library/z8y1yy88.aspx + */ +# define inline __inline +# else +# define inline +# endif +#endif #ifdef __cplusplus } diff --git a/openssl/engines/e_padlock.c b/openssl/engines/e_padlock.c index 9f7a85a8d..5d252f62a 100644 --- a/openssl/engines/e_padlock.c +++ b/openssl/engines/e_padlock.c @@ -384,6 +384,7 @@ padlock_available(void) } #ifndef OPENSSL_NO_AES +#ifndef AES_ASM /* Our own htonl()/ntohl() */ static inline void padlock_bswapl(AES_KEY *ks) @@ -397,6 +398,7 @@ padlock_bswapl(AES_KEY *ks) } } #endif +#endif /* Force key reload from memory to the CPU microcode. Loading EFLAGS from the stack clears EFLAGS[30] diff --git a/openssl/makevms.com b/openssl/makevms.com index 11db2f16e..e4f5a86b6 100644 --- a/openssl/makevms.com +++ b/openssl/makevms.com @@ -646,9 +646,10 @@ $ if (CFLAGS .nes. "") then CFLAGS = CFLAGS+ " " $ CFLAGS = CFLAGS+ "/DEFINE=ZLIB" $ endif $! -$ WRITE H_FILE "#define CFLAGS ""''CFLAGS'""" -$ WRITE H_FILE "#define PLATFORM ""VMS ''ARCHD' ''VMS_VERSION'""" -$ WRITE H_FILE "#define DATE ""''TIME'"" " +$ WRITE H_FILE "#define CFLAGS" +$ WRITE H_FILE "static const char cflags[] = ""compiler: ''CFLAGS'"";" +$ WRITE H_FILE "#define PLATFORM ""platform: VMS ''ARCHD' ''VMS_VERSION'""" +$ WRITE H_FILE "#define DATE ""built on: ''TIME'"" " $! $! Close The [.CRYPTO._xxx]BUILDINF.H File. $! diff --git a/openssl/openssl.spec b/openssl/openssl.spec index 706fb5d23..707dd2c57 100644 --- a/openssl/openssl.spec +++ b/openssl/openssl.spec @@ -7,7 +7,7 @@ Release: 1 Summary: Secure Sockets Layer and cryptography libraries and tools Name: openssl #Version: %{libmaj}.%{libmin}.%{librel} -Version: 1.0.1j +Version: 1.0.1k Source0: ftp://ftp.openssl.org/source/%{name}-%{version}.tar.gz License: OpenSSL Group: System Environment/Libraries diff --git a/openssl/ssl/d1_both.c b/openssl/ssl/d1_both.c index 2e4250fcf..1b9d64bf6 100644 --- a/openssl/ssl/d1_both.c +++ b/openssl/ssl/d1_both.c @@ -156,9 +156,8 @@ static unsigned char bitmask_start_values[] = {0xff, 0xfe, 0xfc, 0xf8, 0xf0, 0xe static unsigned char bitmask_end_values[] = {0xff, 0x01, 0x03, 0x07, 0x0f, 0x1f, 0x3f, 0x7f}; /* XDTLS: figure out the right values */ -static unsigned int g_probable_mtu[] = {1500 - 28, 512 - 28, 256 - 28}; +static const unsigned int g_probable_mtu[] = {1500, 512, 256}; -static unsigned int dtls1_guess_mtu(unsigned int curr_mtu); static void dtls1_fix_message_header(SSL *s, unsigned long frag_off, unsigned long frag_len); static unsigned char *dtls1_write_message_header(SSL *s, @@ -211,8 +210,7 @@ dtls1_hm_fragment_new(unsigned long frag_len, int reassembly) return frag; } -static void -dtls1_hm_fragment_free(hm_fragment *frag) +void dtls1_hm_fragment_free(hm_fragment *frag) { if (frag->msg_header.is_ccs) @@ -225,53 +223,50 @@ dtls1_hm_fragment_free(hm_fragment *frag) OPENSSL_free(frag); } -/* send s->init_buf in records of type 'type' (SSL3_RT_HANDSHAKE or SSL3_RT_CHANGE_CIPHER_SPEC) */ -int dtls1_do_write(SSL *s, int type) - { - int ret; - int curr_mtu; - unsigned int len, frag_off, mac_size, blocksize; +static int dtls1_query_mtu(SSL *s) +{ + if(s->d1->link_mtu) + { + s->d1->mtu = s->d1->link_mtu-BIO_dgram_get_mtu_overhead(SSL_get_wbio(s)); + s->d1->link_mtu = 0; + } /* AHA! Figure out the MTU, and stick to the right size */ - if (s->d1->mtu < dtls1_min_mtu() && !(SSL_get_options(s) & SSL_OP_NO_QUERY_MTU)) + if (s->d1->mtu < dtls1_min_mtu(s)) { - s->d1->mtu = - BIO_ctrl(SSL_get_wbio(s), BIO_CTRL_DGRAM_QUERY_MTU, 0, NULL); - - /* I've seen the kernel return bogus numbers when it doesn't know - * (initial write), so just make sure we have a reasonable number */ - if (s->d1->mtu < dtls1_min_mtu()) + if(!(SSL_get_options(s) & SSL_OP_NO_QUERY_MTU)) { - s->d1->mtu = 0; - s->d1->mtu = dtls1_guess_mtu(s->d1->mtu); - BIO_ctrl(SSL_get_wbio(s), BIO_CTRL_DGRAM_SET_MTU, - s->d1->mtu, NULL); + s->d1->mtu = + BIO_ctrl(SSL_get_wbio(s), BIO_CTRL_DGRAM_QUERY_MTU, 0, NULL); + + /* I've seen the kernel return bogus numbers when it doesn't know + * (initial write), so just make sure we have a reasonable number */ + if (s->d1->mtu < dtls1_min_mtu(s)) + { + /* Set to min mtu */ + s->d1->mtu = dtls1_min_mtu(s); + BIO_ctrl(SSL_get_wbio(s), BIO_CTRL_DGRAM_SET_MTU, + s->d1->mtu, NULL); + } } + else + return 0; } -#if 0 - mtu = s->d1->mtu; - - fprintf(stderr, "using MTU = %d\n", mtu); - - mtu -= (DTLS1_HM_HEADER_LENGTH + DTLS1_RT_HEADER_LENGTH); - - curr_mtu = mtu - BIO_wpending(SSL_get_wbio(s)); + return 1; +} - if ( curr_mtu > 0) - mtu = curr_mtu; - else if ( ( ret = BIO_flush(SSL_get_wbio(s))) <= 0) - return ret; +/* send s->init_buf in records of type 'type' (SSL3_RT_HANDSHAKE or SSL3_RT_CHANGE_CIPHER_SPEC) */ +int dtls1_do_write(SSL *s, int type) + { + int ret; + unsigned int curr_mtu; + int retry = 1; + unsigned int len, frag_off, mac_size, blocksize, used_len; - if ( BIO_wpending(SSL_get_wbio(s)) + s->init_num >= mtu) - { - ret = BIO_flush(SSL_get_wbio(s)); - if ( ret <= 0) - return ret; - mtu = s->d1->mtu - (DTLS1_HM_HEADER_LENGTH + DTLS1_RT_HEADER_LENGTH); - } -#endif + if(!dtls1_query_mtu(s)) + return -1; - OPENSSL_assert(s->d1->mtu >= dtls1_min_mtu()); /* should have something reasonable now */ + OPENSSL_assert(s->d1->mtu >= dtls1_min_mtu(s)); /* should have something reasonable now */ if ( s->init_off == 0 && type == SSL3_RT_HANDSHAKE) OPENSSL_assert(s->init_num == @@ -289,10 +284,15 @@ int dtls1_do_write(SSL *s, int type) blocksize = 0; frag_off = 0; - while( s->init_num) + /* s->init_num shouldn't ever be < 0...but just in case */ + while(s->init_num > 0) { - curr_mtu = s->d1->mtu - BIO_wpending(SSL_get_wbio(s)) - - DTLS1_RT_HEADER_LENGTH - mac_size - blocksize; + used_len = BIO_wpending(SSL_get_wbio(s)) + DTLS1_RT_HEADER_LENGTH + + mac_size + blocksize; + if(s->d1->mtu > used_len) + curr_mtu = s->d1->mtu - used_len; + else + curr_mtu = 0; if ( curr_mtu <= DTLS1_HM_HEADER_LENGTH) { @@ -300,15 +300,27 @@ int dtls1_do_write(SSL *s, int type) ret = BIO_flush(SSL_get_wbio(s)); if ( ret <= 0) return ret; - curr_mtu = s->d1->mtu - DTLS1_RT_HEADER_LENGTH - - mac_size - blocksize; + used_len = DTLS1_RT_HEADER_LENGTH + mac_size + blocksize; + if(s->d1->mtu > used_len + DTLS1_HM_HEADER_LENGTH) + { + curr_mtu = s->d1->mtu - used_len; + } + else + { + /* Shouldn't happen */ + return -1; + } } - if ( s->init_num > curr_mtu) + /* We just checked that s->init_num > 0 so this cast should be safe */ + if (((unsigned int)s->init_num) > curr_mtu) len = curr_mtu; else len = s->init_num; + /* Shouldn't ever happen */ + if(len > INT_MAX) + len = INT_MAX; /* XDTLS: this function is too long. split out the CCS part */ if ( type == SSL3_RT_HANDSHAKE) @@ -319,18 +331,29 @@ int dtls1_do_write(SSL *s, int type) s->init_off -= DTLS1_HM_HEADER_LENGTH; s->init_num += DTLS1_HM_HEADER_LENGTH; - if ( s->init_num > curr_mtu) + /* We just checked that s->init_num > 0 so this cast should be safe */ + if (((unsigned int)s->init_num) > curr_mtu) len = curr_mtu; else len = s->init_num; } + /* Shouldn't ever happen */ + if(len > INT_MAX) + len = INT_MAX; + + if ( len < DTLS1_HM_HEADER_LENGTH ) + { + /* + * len is so small that we really can't do anything sensible + * so fail + */ + return -1; + } dtls1_fix_message_header(s, frag_off, len - DTLS1_HM_HEADER_LENGTH); dtls1_write_message_header(s, (unsigned char *)&s->init_buf->data[s->init_off]); - - OPENSSL_assert(len >= DTLS1_HM_HEADER_LENGTH); } ret=dtls1_write_bytes(s,type,&s->init_buf->data[s->init_off], @@ -343,12 +366,23 @@ int dtls1_do_write(SSL *s, int type) * is fine and wait for an alert to handle the * retransmit */ - if ( BIO_ctrl(SSL_get_wbio(s), + if ( retry && BIO_ctrl(SSL_get_wbio(s), BIO_CTRL_DGRAM_MTU_EXCEEDED, 0, NULL) > 0 ) - s->d1->mtu = BIO_ctrl(SSL_get_wbio(s), - BIO_CTRL_DGRAM_QUERY_MTU, 0, NULL); + { + if(!(SSL_get_options(s) & SSL_OP_NO_QUERY_MTU)) + { + if(!dtls1_query_mtu(s)) + return -1; + /* Have one more go */ + retry = 0; + } + else + return -1; + } else + { return(-1); + } } else { @@ -1412,28 +1446,20 @@ dtls1_write_message_header(SSL *s, unsigned char *p) return p; } -unsigned int -dtls1_min_mtu(void) +unsigned int +dtls1_link_min_mtu(void) { return (g_probable_mtu[(sizeof(g_probable_mtu) / sizeof(g_probable_mtu[0])) - 1]); } -static unsigned int -dtls1_guess_mtu(unsigned int curr_mtu) +unsigned int +dtls1_min_mtu(SSL *s) { - unsigned int i; - - if ( curr_mtu == 0 ) - return g_probable_mtu[0] ; - - for ( i = 0; i < sizeof(g_probable_mtu)/sizeof(g_probable_mtu[0]); i++) - if ( curr_mtu > g_probable_mtu[i]) - return g_probable_mtu[i]; - - return curr_mtu; + return dtls1_link_min_mtu()-BIO_dgram_get_mtu_overhead(SSL_get_wbio(s)); } + void dtls1_get_message_header(unsigned char *data, struct hm_header_st *msg_hdr) { diff --git a/openssl/ssl/d1_clnt.c b/openssl/ssl/d1_clnt.c index fd6562c11..9045fb990 100644 --- a/openssl/ssl/d1_clnt.c +++ b/openssl/ssl/d1_clnt.c @@ -249,6 +249,9 @@ int dtls1_connect(SSL *s) memset(s->s3->client_random,0,sizeof(s->s3->client_random)); s->d1->send_cookie = 0; s->hit = 0; + s->d1->change_cipher_spec_ok = 0; + /* Should have been reset by ssl3_get_finished, too. */ + s->s3->change_cipher_spec = 0; break; #ifndef OPENSSL_NO_SCTP @@ -370,20 +373,6 @@ int dtls1_connect(SSL *s) case SSL3_ST_CR_CERT_A: case SSL3_ST_CR_CERT_B: -#ifndef OPENSSL_NO_TLSEXT - ret=ssl3_check_finished(s); - if (ret <= 0) goto end; - if (ret == 2) - { - s->hit = 1; - if (s->tlsext_ticket_expected) - s->state=SSL3_ST_CR_SESSION_TICKET_A; - else - s->state=SSL3_ST_CR_FINISHED_A; - s->init_num=0; - break; - } -#endif /* Check if it is anon DH or PSK */ if (!(s->s3->tmp.new_cipher->algorithm_auth & SSL_aNULL) && !(s->s3->tmp.new_cipher->algorithm_mkey & SSL_kPSK)) @@ -506,7 +495,6 @@ int dtls1_connect(SSL *s) else #endif s->state=SSL3_ST_CW_CHANGE_A; - s->s3->change_cipher_spec=0; } s->init_num=0; @@ -527,7 +515,6 @@ int dtls1_connect(SSL *s) #endif s->state=SSL3_ST_CW_CHANGE_A; s->init_num=0; - s->s3->change_cipher_spec=0; break; case SSL3_ST_CW_CHANGE_A: @@ -1730,6 +1717,12 @@ int dtls1_send_client_certificate(SSL *s) s->state=SSL3_ST_CW_CERT_D; l=dtls1_output_cert_chain(s, (s->s3->tmp.cert_req == 2)?NULL:s->cert->key->x509); + if (!l) + { + SSLerr(SSL_F_DTLS1_SEND_CLIENT_CERTIFICATE, ERR_R_INTERNAL_ERROR); + ssl3_send_alert(s,SSL3_AL_FATAL,SSL_AD_INTERNAL_ERROR); + return 0; + } s->init_num=(int)l; s->init_off=0; diff --git a/openssl/ssl/d1_enc.c b/openssl/ssl/d1_enc.c index 712c4647f..3da2b4c8c 100644 --- a/openssl/ssl/d1_enc.c +++ b/openssl/ssl/d1_enc.c @@ -241,7 +241,8 @@ int dtls1_enc(SSL *s, int send) return 0; } - EVP_Cipher(ds,rec->data,rec->input,l); + if(EVP_Cipher(ds,rec->data,rec->input,l) < 1) + return -1; #ifdef KSSL_DEBUG { diff --git a/openssl/ssl/d1_lib.c b/openssl/ssl/d1_lib.c index 82ca65392..14337b31a 100644 --- a/openssl/ssl/d1_lib.c +++ b/openssl/ssl/d1_lib.c @@ -113,6 +113,9 @@ int dtls1_new(SSL *s) d1->cookie_len = sizeof(s->d1->cookie); } + d1->link_mtu = 0; + d1->mtu = 0; + if( ! d1->unprocessed_rcds.q || ! d1->processed_rcds.q || ! d1->buffered_messages || ! d1->sent_messages || ! d1->buffered_app_data.q) { @@ -161,16 +164,14 @@ static void dtls1_clear_queues(SSL *s) while( (item = pqueue_pop(s->d1->buffered_messages)) != NULL) { frag = (hm_fragment *)item->data; - OPENSSL_free(frag->fragment); - OPENSSL_free(frag); + dtls1_hm_fragment_free(frag); pitem_free(item); } while ( (item = pqueue_pop(s->d1->sent_messages)) != NULL) { frag = (hm_fragment *)item->data; - OPENSSL_free(frag->fragment); - OPENSSL_free(frag); + dtls1_hm_fragment_free(frag); pitem_free(item); } @@ -210,6 +211,7 @@ void dtls1_clear(SSL *s) pqueue sent_messages; pqueue buffered_app_data; unsigned int mtu; + unsigned int link_mtu; if (s->d1) { @@ -219,6 +221,7 @@ void dtls1_clear(SSL *s) sent_messages = s->d1->sent_messages; buffered_app_data = s->d1->buffered_app_data.q; mtu = s->d1->mtu; + link_mtu = s->d1->link_mtu; dtls1_clear_queues(s); @@ -232,6 +235,7 @@ void dtls1_clear(SSL *s) if (SSL_get_options(s) & SSL_OP_NO_QUERY_MTU) { s->d1->mtu = mtu; + s->d1->link_mtu = link_mtu; } s->d1->unprocessed_rcds.q = unprocessed_rcds; @@ -276,7 +280,22 @@ long dtls1_ctrl(SSL *s, int cmd, long larg, void *parg) /* Just one protocol version is supported so far; * fail closed if the version is not as expected. */ return s->version == DTLS_MAX_VERSION; - + case DTLS_CTRL_SET_LINK_MTU: + if (larg < (long)dtls1_link_min_mtu()) + return 0; + s->d1->link_mtu = larg; + return 1; + case DTLS_CTRL_GET_LINK_MIN_MTU: + return (long)dtls1_link_min_mtu(); + case SSL_CTRL_SET_MTU: + /* + * We may not have a BIO set yet so can't call dtls1_min_mtu() + * We'll have to make do with dtls1_link_min_mtu() and max overhead + */ + if (larg < (long)dtls1_link_min_mtu() - DTLS1_MAX_MTU_OVERHEAD) + return 0; + s->d1->mtu = larg; + return larg; default: ret = ssl3_ctrl(s, cmd, larg, parg); break; @@ -415,12 +434,17 @@ void dtls1_stop_timer(SSL *s) int dtls1_check_timeout_num(SSL *s) { + unsigned int mtu; + s->d1->timeout.num_alerts++; /* Reduce MTU after 2 unsuccessful retransmissions */ - if (s->d1->timeout.num_alerts > 2) + if (s->d1->timeout.num_alerts > 2 + && !(SSL_get_options(s) & SSL_OP_NO_QUERY_MTU)) { - s->d1->mtu = BIO_ctrl(SSL_get_wbio(s), BIO_CTRL_DGRAM_GET_FALLBACK_MTU, 0, NULL); + mtu = BIO_ctrl(SSL_get_wbio(s), BIO_CTRL_DGRAM_GET_FALLBACK_MTU, 0, NULL); + if(mtu < s->d1->mtu) + s->d1->mtu = mtu; } if (s->d1->timeout.num_alerts > DTLS1_TMO_ALERT_COUNT) diff --git a/openssl/ssl/d1_pkt.c b/openssl/ssl/d1_pkt.c index 438c0913d..0059fe2f1 100644 --- a/openssl/ssl/d1_pkt.c +++ b/openssl/ssl/d1_pkt.c @@ -212,7 +212,7 @@ dtls1_buffer_record(SSL *s, record_pqueue *queue, unsigned char *priority) /* Limit the size of the queue to prevent DOS attacks */ if (pqueue_size(queue->q) >= 100) return 0; - + rdata = OPENSSL_malloc(sizeof(DTLS1_RECORD_DATA)); item = pitem_new(priority, rdata); if (rdata == NULL || item == NULL) @@ -247,18 +247,22 @@ dtls1_buffer_record(SSL *s, record_pqueue *queue, unsigned char *priority) if (!ssl3_setup_buffers(s)) { SSLerr(SSL_F_DTLS1_BUFFER_RECORD, ERR_R_INTERNAL_ERROR); + if (rdata->rbuf.buf != NULL) + OPENSSL_free(rdata->rbuf.buf); OPENSSL_free(rdata); pitem_free(item); - return(0); + return(-1); } /* insert should not fail, since duplicates are dropped */ if (pqueue_insert(queue->q, item) == NULL) { SSLerr(SSL_F_DTLS1_BUFFER_RECORD, ERR_R_INTERNAL_ERROR); + if (rdata->rbuf.buf != NULL) + OPENSSL_free(rdata->rbuf.buf); OPENSSL_free(rdata); pitem_free(item); - return(0); + return(-1); } return(1); @@ -314,8 +318,9 @@ dtls1_process_buffered_records(SSL *s) dtls1_get_unprocessed_record(s); if ( ! dtls1_process_record(s)) return(0); - dtls1_buffer_record(s, &(s->d1->processed_rcds), - s->s3->rrec.seq_num); + if(dtls1_buffer_record(s, &(s->d1->processed_rcds), + s->s3->rrec.seq_num)<0) + return -1; } } @@ -530,7 +535,6 @@ printf("\n"); /* we have pulled in a full packet so zero things */ s->packet_length=0; - dtls1_record_bitmap_update(s, &(s->d1->bitmap));/* Mark receipt of record. */ return(1); f_err: @@ -563,7 +567,8 @@ int dtls1_get_record(SSL *s) /* The epoch may have changed. If so, process all the * pending records. This is a non-blocking operation. */ - dtls1_process_buffered_records(s); + if(dtls1_process_buffered_records(s)<0) + return -1; /* if we're renegotiating, then there may be buffered records */ if (dtls1_get_processed_record(s)) @@ -642,8 +647,6 @@ again: /* now s->packet_length == DTLS1_RT_HEADER_LENGTH */ i=rr->length; n=ssl3_read_n(s,i,i,1); - if (n <= 0) return(n); /* error or non-blocking io */ - /* this packet contained a partial record, dump it */ if ( n != i) { @@ -678,7 +681,8 @@ again: * would be dropped unnecessarily. */ if (!(s->d1->listen && rr->type == SSL3_RT_HANDSHAKE && - *p == SSL3_MT_CLIENT_HELLO) && + s->packet_length > DTLS1_RT_HEADER_LENGTH && + s->packet[DTLS1_RT_HEADER_LENGTH] == SSL3_MT_CLIENT_HELLO) && !dtls1_record_replay_check(s, bitmap)) { rr->length = 0; @@ -701,7 +705,9 @@ again: { if ((SSL_in_init(s) || s->in_handshake) && !s->d1->listen) { - dtls1_buffer_record(s, &(s->d1->unprocessed_rcds), rr->seq_num); + if(dtls1_buffer_record(s, &(s->d1->unprocessed_rcds), rr->seq_num)<0) + return -1; + dtls1_record_bitmap_update(s, bitmap);/* Mark receipt of record. */ } rr->length = 0; s->packet_length = 0; @@ -714,6 +720,7 @@ again: s->packet_length = 0; /* dump this record */ goto again; /* get another record */ } + dtls1_record_bitmap_update(s, bitmap);/* Mark receipt of record. */ return(1); @@ -865,7 +872,11 @@ start: * buffer the application data for later processing rather * than dropping the connection. */ - dtls1_buffer_record(s, &(s->d1->buffered_app_data), rr->seq_num); + if(dtls1_buffer_record(s, &(s->d1->buffered_app_data), rr->seq_num)<0) + { + SSLerr(SSL_F_DTLS1_READ_BYTES, ERR_R_INTERNAL_ERROR); + return -1; + } rr->length = 0; goto start; } @@ -1619,7 +1630,7 @@ int do_dtls1_write(SSL *s, int type, const unsigned char *buf, unsigned int len, wr->length += bs; } - s->method->ssl3_enc->enc(s,1); + if(s->method->ssl3_enc->enc(s,1) < 1) goto err; /* record length after mac and block padding */ /* if (type == SSL3_RT_APPLICATION_DATA || diff --git a/openssl/ssl/d1_srvr.c b/openssl/ssl/d1_srvr.c index 4b8ba3e45..da4c21e06 100644 --- a/openssl/ssl/d1_srvr.c +++ b/openssl/ssl/d1_srvr.c @@ -233,6 +233,7 @@ int dtls1_accept(SSL *s) } if (!BUF_MEM_grow(buf,SSL3_RT_MAX_PLAIN_LENGTH)) { + BUF_MEM_free(buf); ret= -1; goto end; } @@ -246,6 +247,9 @@ int dtls1_accept(SSL *s) } s->init_num=0; + s->d1->change_cipher_spec_ok = 0; + /* Should have been reset by ssl3_get_finished, too. */ + s->s3->change_cipher_spec = 0; if (s->state != SSL_ST_RENEGOTIATE) { @@ -450,24 +454,15 @@ int dtls1_accept(SSL *s) case SSL3_ST_SW_KEY_EXCH_B: alg_k = s->s3->tmp.new_cipher->algorithm_mkey; - /* clear this, it may get reset by - * send_server_key_exchange */ - if ((s->options & SSL_OP_EPHEMERAL_RSA) -#ifndef OPENSSL_NO_KRB5 - && !(alg_k & SSL_kKRB5) -#endif /* OPENSSL_NO_KRB5 */ - ) - /* option SSL_OP_EPHEMERAL_RSA sends temporary RSA key - * even when forbidden by protocol specs - * (handshake may fail as clients are not required to - * be able to handle this) */ - s->s3->tmp.use_rsa_tmp=1; - else - s->s3->tmp.use_rsa_tmp=0; + /* + * clear this, it may get reset by + * send_server_key_exchange + */ + s->s3->tmp.use_rsa_tmp=0; /* only send if a DH key exchange or * RSA but we have a sign only certificate */ - if (s->s3->tmp.use_rsa_tmp + if (0 /* PSK: send ServerKeyExchange if PSK identity * hint if provided */ #ifndef OPENSSL_NO_PSK @@ -658,8 +653,14 @@ int dtls1_accept(SSL *s) case SSL3_ST_SR_CERT_VRFY_A: case SSL3_ST_SR_CERT_VRFY_B: - - s->d1->change_cipher_spec_ok = 1; + /* + * This *should* be the first time we enable CCS, but be + * extra careful about surrounding code changes. We need + * to set this here because we don't know if we're + * expecting a CertificateVerify or not. + */ + if (!s->s3->change_cipher_spec) + s->d1->change_cipher_spec_ok = 1; /* we should decide if we expected this one */ ret=ssl3_get_cert_verify(s); if (ret <= 0) goto end; @@ -675,7 +676,18 @@ int dtls1_accept(SSL *s) case SSL3_ST_SR_FINISHED_A: case SSL3_ST_SR_FINISHED_B: - s->d1->change_cipher_spec_ok = 1; + /* + * Enable CCS for resumed handshakes. + * In a full handshake, we end up here through + * SSL3_ST_SR_CERT_VRFY_B, so change_cipher_spec_ok was + * already set. Receiving a CCS clears the flag, so make + * sure not to re-enable it to ban duplicates. + * s->s3->change_cipher_spec is set when a CCS is + * processed in d1_pkt.c, and remains set until + * the client's Finished message is read. + */ + if (!s->s3->change_cipher_spec) + s->d1->change_cipher_spec_ok = 1; ret=ssl3_get_finished(s,SSL3_ST_SR_FINISHED_A, SSL3_ST_SR_FINISHED_B); if (ret <= 0) goto end; @@ -1604,6 +1616,11 @@ int dtls1_send_server_certificate(SSL *s) } l=dtls1_output_cert_chain(s,x); + if (!l) + { + SSLerr(SSL_F_DTLS1_SEND_SERVER_CERTIFICATE,ERR_R_INTERNAL_ERROR); + return(0); + } s->state=SSL3_ST_SW_CERT_B; s->init_num=(int)l; s->init_off=0; diff --git a/openssl/ssl/dtls1.h b/openssl/ssl/dtls1.h index 192c5deff..338575268 100644 --- a/openssl/ssl/dtls1.h +++ b/openssl/ssl/dtls1.h @@ -117,6 +117,9 @@ extern "C" { #define DTLS1_SCTP_AUTH_LABEL "EXPORTER_DTLS_OVER_SCTP" #endif +/* Max MTU overhead we know about so far is 40 for IPv6 + 8 for UDP */ +#define DTLS1_MAX_MTU_OVERHEAD 48 + typedef struct dtls1_bitmap_st { unsigned long map; /* track 32 packets on 32-bit systems @@ -231,6 +234,7 @@ typedef struct dtls1_state_st /* Is set when listening for new connections with dtls1_listen() */ unsigned int listen; + unsigned int link_mtu; /* max on-the-wire DTLS packet size */ unsigned int mtu; /* max DTLS packet size */ struct hm_header_st w_msg_hdr; @@ -252,6 +256,10 @@ typedef struct dtls1_state_st unsigned int handshake_fragment_len; unsigned int retransmitting; + /* + * Set when the handshake is ready to process peer's ChangeCipherSpec message. + * Cleared after the message has been processed. + */ unsigned int change_cipher_spec_ok; #ifndef OPENSSL_NO_SCTP diff --git a/openssl/ssl/kssl.c b/openssl/ssl/kssl.c index fd7c67bb1..950a0c56f 100644 --- a/openssl/ssl/kssl.c +++ b/openssl/ssl/kssl.c @@ -954,15 +954,15 @@ print_krb5_data(char *label, krb5_data *kdata) { int i; - printf("%s[%d] ", label, kdata->length); + fprintf(stderr,"%s[%d] ", label, kdata->length); for (i=0; i < (int)kdata->length; i++) { if (0 && isprint((int) kdata->data[i])) - printf( "%c ", kdata->data[i]); + fprintf(stderr, "%c ", kdata->data[i]); else - printf( "%02x ", (unsigned char) kdata->data[i]); + fprintf(stderr, "%02x ", (unsigned char) kdata->data[i]); } - printf("\n"); + fprintf(stderr,"\n"); } @@ -973,20 +973,20 @@ print_krb5_authdata(char *label, krb5_authdata **adata) { if (adata == NULL) { - printf("%s, authdata==0\n", label); + fprintf(stderr,"%s, authdata==0\n", label); return; } - printf("%s [%p]\n", label, (void *)adata); + fprintf(stderr,"%s [%p]\n", label, (void *)adata); #if 0 { int i; - printf("%s[at%d:%d] ", label, adata->ad_type, adata->length); + fprintf(stderr,"%s[at%d:%d] ", label, adata->ad_type, adata->length); for (i=0; i < adata->length; i++) { - printf((isprint(adata->contents[i]))? "%c ": "%02x", + fprintf(stderr,(isprint(adata->contents[i]))? "%c ": "%02x", adata->contents[i]); } - printf("\n"); + fprintf(stderr,"\n"); } #endif } @@ -1001,24 +1001,24 @@ print_krb5_keyblock(char *label, krb5_keyblock *keyblk) if (keyblk == NULL) { - printf("%s, keyblk==0\n", label); + fprintf(stderr,"%s, keyblk==0\n", label); return; } #ifdef KRB5_HEIMDAL - printf("%s\n\t[et%d:%d]: ", label, keyblk->keytype, + fprintf(stderr,"%s\n\t[et%d:%d]: ", label, keyblk->keytype, keyblk->keyvalue->length); for (i=0; i < (int)keyblk->keyvalue->length; i++) { - printf("%02x",(unsigned char *)(keyblk->keyvalue->contents)[i]); + fprintf(stderr,"%02x",(unsigned char *)(keyblk->keyvalue->contents)[i]); } - printf("\n"); + fprintf(stderr,"\n"); #else - printf("%s\n\t[et%d:%d]: ", label, keyblk->enctype, keyblk->length); + fprintf(stderr,"%s\n\t[et%d:%d]: ", label, keyblk->enctype, keyblk->length); for (i=0; i < (int)keyblk->length; i++) { - printf("%02x",keyblk->contents[i]); + fprintf(stderr,"%02x",keyblk->contents[i]); } - printf("\n"); + fprintf(stderr,"\n"); #endif } @@ -1031,17 +1031,17 @@ print_krb5_princ(char *label, krb5_principal_data *princ) { int i, ui, uj; - printf("%s principal Realm: ", label); + fprintf(stderr,"%s principal Realm: ", label); if (princ == NULL) return; for (ui=0; ui < (int)princ->realm.length; ui++) putchar(princ->realm.data[ui]); - printf(" (nametype %d) has %d strings:\n", princ->type,princ->length); + fprintf(stderr," (nametype %d) has %d strings:\n", princ->type,princ->length); for (i=0; i < (int)princ->length; i++) { - printf("\t%d [%d]: ", i, princ->data[i].length); + fprintf(stderr,"\t%d [%d]: ", i, princ->data[i].length); for (uj=0; uj < (int)princ->data[i].length; uj++) { putchar(princ->data[i].data[uj]); } - printf("\n"); + fprintf(stderr,"\n"); } return; } @@ -1332,7 +1332,7 @@ kssl_sget_tkt( /* UPDATE */ KSSL_CTX *kssl_ctx, } #ifdef KSSL_DEBUG - printf("in kssl_sget_tkt(%s)\n", kstring(kssl_ctx->service_name)); + fprintf(stderr,"in kssl_sget_tkt(%s)\n", kstring(kssl_ctx->service_name)); #endif /* KSSL_DEBUG */ if (!krb5context && (krb5rc = krb5_init_context(&krb5context))) @@ -1481,18 +1481,18 @@ kssl_sget_tkt( /* UPDATE */ KSSL_CTX *kssl_ctx, #ifdef KSSL_DEBUG { int i; krb5_address **paddr = krb5ticket->enc_part2->caddrs; - printf("Decrypted ticket fields:\n"); - printf("\tflags: %X, transit-type: %X", + fprintf(stderr,"Decrypted ticket fields:\n"); + fprintf(stderr,"\tflags: %X, transit-type: %X", krb5ticket->enc_part2->flags, krb5ticket->enc_part2->transited.tr_type); print_krb5_data("\ttransit-data: ", &(krb5ticket->enc_part2->transited.tr_contents)); - printf("\tcaddrs: %p, authdata: %p\n", + fprintf(stderr,"\tcaddrs: %p, authdata: %p\n", krb5ticket->enc_part2->caddrs, krb5ticket->enc_part2->authorization_data); if (paddr) { - printf("\tcaddrs:\n"); + fprintf(stderr,"\tcaddrs:\n"); for (i=0; paddr[i] != NULL; i++) { krb5_data d; @@ -1501,7 +1501,7 @@ kssl_sget_tkt( /* UPDATE */ KSSL_CTX *kssl_ctx, print_krb5_data("\t\tIP: ", &d); } } - printf("\tstart/auth/end times: %d / %d / %d\n", + fprintf(stderr,"\tstart/auth/end times: %d / %d / %d\n", krb5ticket->enc_part2->times.starttime, krb5ticket->enc_part2->times.authtime, krb5ticket->enc_part2->times.endtime); @@ -1976,7 +1976,7 @@ krb5_error_code kssl_validate_times( krb5_timestamp atime, if ((now - ttimes->endtime) > skew) return SSL_R_KRB5_S_TKT_EXPIRED; #ifdef KSSL_DEBUG - printf("kssl_validate_times: %d |<- | %d - %d | < %d ->| %d\n", + fprintf(stderr,"kssl_validate_times: %d |<- | %d - %d | < %d ->| %d\n", start, atime, now, skew, ttimes->endtime); #endif /* KSSL_DEBUG */ @@ -2027,10 +2027,10 @@ krb5_error_code kssl_check_authent( #ifdef KSSL_DEBUG { unsigned int ui; - printf("kssl_check_authent: authenticator[%d]:\n",authentp->length); + fprintf(stderr,"kssl_check_authent: authenticator[%d]:\n",authentp->length); p = authentp->data; - for (ui=0; ui < authentp->length; ui++) printf("%02x ",p[ui]); - printf("\n"); + for (ui=0; ui < authentp->length; ui++) fprintf(stderr,"%02x ",p[ui]); + fprintf(stderr,"\n"); } #endif /* KSSL_DEBUG */ @@ -2095,9 +2095,9 @@ krb5_error_code kssl_check_authent( #ifdef KSSL_DEBUG { int padl; - printf("kssl_check_authent: decrypted authenticator[%d] =\n", outl); - for (padl=0; padl < outl; padl++) printf("%02x ",unenc_authent[padl]); - printf("\n"); + fprintf(stderr,"kssl_check_authent: decrypted authenticator[%d] =\n", outl); + for (padl=0; padl < outl; padl++) fprintf(stderr,"%02x ",unenc_authent[padl]); + fprintf(stderr,"\n"); } #endif /* KSSL_DEBUG */ @@ -2132,10 +2132,10 @@ krb5_error_code kssl_check_authent( } #ifdef KSSL_DEBUG - printf("kssl_check_authent: returns %d for client time ", *atimep); + fprintf(stderr,"kssl_check_authent: returns %d for client time ", *atimep); if (auth && auth->ctime && auth->ctime->length && auth->ctime->data) - printf("%.*s\n", auth->ctime->length, auth->ctime->data); - else printf("NULL\n"); + fprintf(stderr,"%.*s\n", auth->ctime->length, auth->ctime->data); + else fprintf(stderr,"NULL\n"); #endif /* KSSL_DEBUG */ err: diff --git a/openssl/ssl/s23_srvr.c b/openssl/ssl/s23_srvr.c index 93ca7d53c..3178815ec 100644 --- a/openssl/ssl/s23_srvr.c +++ b/openssl/ssl/s23_srvr.c @@ -192,6 +192,7 @@ int ssl23_accept(SSL *s) } if (!BUF_MEM_grow(buf,SSL3_RT_MAX_PLAIN_LENGTH)) { + BUF_MEM_free(buf); ret= -1; goto end; } @@ -602,12 +603,14 @@ int ssl23_get_client_hello(SSL *s) if ((type == 2) || (type == 3)) { /* we have SSLv3/TLSv1 (type 2: SSL2 style, type 3: SSL3/TLS style) */ - s->method = ssl23_get_server_method(s->version); - if (s->method == NULL) + const SSL_METHOD *new_method; + new_method = ssl23_get_server_method(s->version); + if (new_method == NULL) { SSLerr(SSL_F_SSL23_GET_CLIENT_HELLO,SSL_R_UNSUPPORTED_PROTOCOL); goto err; } + s->method = new_method; if (!ssl_init_wbio_buffer(s,1)) goto err; diff --git a/openssl/ssl/s2_enc.c b/openssl/ssl/s2_enc.c index ff3395f45..a35968f63 100644 --- a/openssl/ssl/s2_enc.c +++ b/openssl/ssl/s2_enc.c @@ -117,8 +117,9 @@ err: /* read/writes from s->s2->mac_data using length for encrypt and * decrypt. It sets s->s2->padding and s->[rw]length - * if we are encrypting */ -void ssl2_enc(SSL *s, int send) + * if we are encrypting + * Returns 0 on error and 1 on success */ +int ssl2_enc(SSL *s, int send) { EVP_CIPHER_CTX *ds; unsigned long l; @@ -136,7 +137,7 @@ void ssl2_enc(SSL *s, int send) } /* check for NULL cipher */ - if (ds == NULL) return; + if (ds == NULL) return 1; bs=ds->cipher->block_size; @@ -145,7 +146,10 @@ void ssl2_enc(SSL *s, int send) if (bs == 8) l=(l+7)/8*8; - EVP_Cipher(ds,s->s2->mac_data,s->s2->mac_data,l); + if(EVP_Cipher(ds,s->s2->mac_data,s->s2->mac_data,l) < 1) + return 0; + + return 1; } void ssl2_mac(SSL *s, unsigned char *md, int send) diff --git a/openssl/ssl/s2_pkt.c b/openssl/ssl/s2_pkt.c index 8bb6ab8ba..acd61dc54 100644 --- a/openssl/ssl/s2_pkt.c +++ b/openssl/ssl/s2_pkt.c @@ -265,7 +265,11 @@ static int ssl2_read_internal(SSL *s, void *buf, int len, int peek) if ((!s->s2->clear_text) && (s->s2->rlength >= (unsigned int)mac_size)) { - ssl2_enc(s,0); + if(!ssl2_enc(s,0)) + { + SSLerr(SSL_F_SSL2_READ_INTERNAL,SSL_R_DECRYPTION_FAILED); + return(-1); + } s->s2->ract_data_length-=mac_size; ssl2_mac(s,mac,0); s->s2->ract_data_length-=s->s2->padding; @@ -616,7 +620,8 @@ static int n_do_ssl_write(SSL *s, const unsigned char *buf, unsigned int len) s->s2->wact_data_length=len+p; ssl2_mac(s,s->s2->mac_data,1); s->s2->wlength+=p+mac_size; - ssl2_enc(s,1); + if(ssl2_enc(s,1) < 1) + return -1; } /* package up the header */ diff --git a/openssl/ssl/s2_srvr.c b/openssl/ssl/s2_srvr.c index 2cba426bb..59ced3f30 100644 --- a/openssl/ssl/s2_srvr.c +++ b/openssl/ssl/s2_srvr.c @@ -188,13 +188,21 @@ int ssl2_accept(SSL *s) s->version=SSL2_VERSION; s->type=SSL_ST_ACCEPT; - buf=s->init_buf; - if ((buf == NULL) && ((buf=BUF_MEM_new()) == NULL)) - { ret= -1; goto end; } - if (!BUF_MEM_grow(buf,(int) - SSL2_MAX_RECORD_LENGTH_3_BYTE_HEADER)) - { ret= -1; goto end; } - s->init_buf=buf; + if(s->init_buf == NULL) + { + if ((buf=BUF_MEM_new()) == NULL) + { + ret= -1; + goto end; + } + if (!BUF_MEM_grow(buf,(int) SSL2_MAX_RECORD_LENGTH_3_BYTE_HEADER)) + { + BUF_MEM_free(buf); + ret= -1; + goto end; + } + s->init_buf=buf; + } s->init_num=0; s->ctx->stats.sess_accept++; s->handshake_func=ssl2_accept; diff --git a/openssl/ssl/s3_both.c b/openssl/ssl/s3_both.c index 53b9390fd..3581fbf4f 100644 --- a/openssl/ssl/s3_both.c +++ b/openssl/ssl/s3_both.c @@ -439,6 +439,7 @@ long ssl3_get_message(SSL *s, int st1, int stn, int mt, long max, int *ok) goto f_err; } *ok=1; + s->state = stn; s->init_msg = s->init_buf->data + 4; s->init_num = (int)s->s3->tmp.message_size; return s->init_num; diff --git a/openssl/ssl/s3_clnt.c b/openssl/ssl/s3_clnt.c index 263e6348c..769271698 100644 --- a/openssl/ssl/s3_clnt.c +++ b/openssl/ssl/s3_clnt.c @@ -167,9 +167,9 @@ #include <openssl/engine.h> #endif -static const SSL_METHOD *ssl3_get_client_method(int ver); static int ca_dn_cmp(const X509_NAME * const *a,const X509_NAME * const *b); +#ifndef OPENSSL_NO_SSL3_METHOD static const SSL_METHOD *ssl3_get_client_method(int ver) { if (ver == SSL3_VERSION) @@ -182,6 +182,7 @@ IMPLEMENT_ssl3_meth_func(SSLv3_client_method, ssl_undefined_function, ssl3_connect, ssl3_get_client_method) +#endif int ssl3_connect(SSL *s) { @@ -272,6 +273,9 @@ int ssl3_connect(SSL *s) s->state=SSL3_ST_CW_CLNT_HELLO_A; s->ctx->stats.sess_connect++; s->init_num=0; + s->s3->flags &= ~SSL3_FLAGS_CCS_OK; + /* Should have been reset by ssl3_get_finished, too. */ + s->s3->change_cipher_spec = 0; break; case SSL3_ST_CW_CLNT_HELLO_A: @@ -312,20 +316,6 @@ int ssl3_connect(SSL *s) case SSL3_ST_CR_CERT_A: case SSL3_ST_CR_CERT_B: -#ifndef OPENSSL_NO_TLSEXT - ret=ssl3_check_finished(s); - if (ret <= 0) goto end; - if (ret == 2) - { - s->hit = 1; - if (s->tlsext_ticket_expected) - s->state=SSL3_ST_CR_SESSION_TICKET_A; - else - s->state=SSL3_ST_CR_FINISHED_A; - s->init_num=0; - break; - } -#endif /* Check if it is anon DH/ECDH, SRP auth */ /* or PSK */ if (!(s->s3->tmp.new_cipher->algorithm_auth & (SSL_aNULL|SSL_aSRP)) && @@ -433,12 +423,10 @@ int ssl3_connect(SSL *s) else { s->state=SSL3_ST_CW_CHANGE_A; - s->s3->change_cipher_spec=0; } if (s->s3->flags & TLS1_FLAGS_SKIP_CERT_VERIFY) { s->state=SSL3_ST_CW_CHANGE_A; - s->s3->change_cipher_spec=0; } s->init_num=0; @@ -450,7 +438,6 @@ int ssl3_connect(SSL *s) if (ret <= 0) goto end; s->state=SSL3_ST_CW_CHANGE_A; s->init_num=0; - s->s3->change_cipher_spec=0; break; case SSL3_ST_CW_CHANGE_A: @@ -510,7 +497,6 @@ int ssl3_connect(SSL *s) s->method->ssl3_enc->client_finished_label, s->method->ssl3_enc->client_finished_label_len); if (ret <= 0) goto end; - s->s3->flags |= SSL3_FLAGS_CCS_OK; s->state=SSL3_ST_CW_FLUSH; /* clear flags */ @@ -559,7 +545,6 @@ int ssl3_connect(SSL *s) case SSL3_ST_CR_FINISHED_A: case SSL3_ST_CR_FINISHED_B: - s->s3->flags |= SSL3_FLAGS_CCS_OK; ret=ssl3_get_finished(s,SSL3_ST_CR_FINISHED_A, SSL3_ST_CR_FINISHED_B); @@ -669,11 +654,7 @@ int ssl3_client_hello(SSL *s) SSL_SESSION *sess = s->session; if ((sess == NULL) || (sess->ssl_version != s->version) || -#ifdef OPENSSL_NO_TLSEXT !sess->session_id_length || -#else - (!sess->session_id_length && !sess->tlsext_tick) || -#endif (sess->not_resumable)) { if (!ssl_get_new_session(s,0)) @@ -879,6 +860,8 @@ int ssl3_get_server_hello(SSL *s) memcpy(s->s3->server_random,p,SSL3_RANDOM_SIZE); p+=SSL3_RANDOM_SIZE; + s->hit = 0; + /* get the session-id */ j= *(p++); @@ -902,12 +885,12 @@ int ssl3_get_server_hello(SSL *s) { s->session->cipher = pref_cipher ? pref_cipher : ssl_get_cipher_by_char(s, p+j); - s->s3->flags |= SSL3_FLAGS_CCS_OK; + s->hit = 1; } } #endif /* OPENSSL_NO_TLSEXT */ - if (j != 0 && j == s->session->session_id_length + if (!s->hit && j != 0 && j == s->session->session_id_length && memcmp(p,s->session->session_id,j) == 0) { if(s->sid_ctx_length != s->session->sid_ctx_length @@ -918,14 +901,13 @@ int ssl3_get_server_hello(SSL *s) SSLerr(SSL_F_SSL3_GET_SERVER_HELLO,SSL_R_ATTEMPT_TO_REUSE_SESSION_IN_DIFFERENT_CONTEXT); goto f_err; } - s->s3->flags |= SSL3_FLAGS_CCS_OK; s->hit=1; } - else /* a miss or crap from the other end */ + /* a miss or crap from the other end */ + if (!s->hit) { /* If we were trying for session-id reuse, make a new * SSL_SESSION so we don't stuff up other people */ - s->hit=0; if (s->session->session_id_length > 0) { if (!ssl_get_new_session(s,0)) @@ -1203,9 +1185,9 @@ int ssl3_get_server_certificate(SSL *s) ? 0 : 1; #ifdef KSSL_DEBUG - printf("pkey,x = %p, %p\n", pkey,x); - printf("ssl_cert_type(x,pkey) = %d\n", ssl_cert_type(x,pkey)); - printf("cipher, alg, nc = %s, %lx, %lx, %d\n", s->s3->tmp.new_cipher->name, + fprintf(stderr,"pkey,x = %p, %p\n", pkey,x); + fprintf(stderr,"ssl_cert_type(x,pkey) = %d\n", ssl_cert_type(x,pkey)); + fprintf(stderr,"cipher, alg, nc = %s, %lx, %lx, %d\n", s->s3->tmp.new_cipher->name, s->s3->tmp.new_cipher->algorithm_mkey, s->s3->tmp.new_cipher->algorithm_auth, need_cert); #endif /* KSSL_DEBUG */ @@ -1295,6 +1277,8 @@ int ssl3_get_key_exchange(SSL *s) int encoded_pt_len = 0; #endif + EVP_MD_CTX_init(&md_ctx); + /* use same message size as in ssl3_get_certificate_request() * as ServerKeyExchange message may be skipped */ n=s->method->ssl_get_message(s, @@ -1305,14 +1289,26 @@ int ssl3_get_key_exchange(SSL *s) &ok); if (!ok) return((int)n); + alg_k=s->s3->tmp.new_cipher->algorithm_mkey; + if (s->s3->tmp.message_type != SSL3_MT_SERVER_KEY_EXCHANGE) { + /* + * Can't skip server key exchange if this is an ephemeral + * ciphersuite. + */ + if (alg_k & (SSL_kEDH|SSL_kEECDH)) + { + SSLerr(SSL_F_SSL3_GET_KEY_EXCHANGE, SSL_R_UNEXPECTED_MESSAGE); + al = SSL_AD_UNEXPECTED_MESSAGE; + goto f_err; + } #ifndef OPENSSL_NO_PSK /* In plain PSK ciphersuite, ServerKeyExchange can be omitted if no identity hint is sent. Set session->sess_cert anyway to avoid problems later.*/ - if (s->s3->tmp.new_cipher->algorithm_mkey & SSL_kPSK) + if (alg_k & SSL_kPSK) { s->session->sess_cert=ssl_sess_cert_new(); if (s->ctx->psk_identity_hint) @@ -1357,9 +1353,7 @@ int ssl3_get_key_exchange(SSL *s) /* Total length of the parameters including the length prefix */ param_len=0; - alg_k=s->s3->tmp.new_cipher->algorithm_mkey; alg_a=s->s3->tmp.new_cipher->algorithm_auth; - EVP_MD_CTX_init(&md_ctx); al=SSL_AD_DECODE_ERROR; @@ -1543,6 +1537,13 @@ int ssl3_get_key_exchange(SSL *s) #ifndef OPENSSL_NO_RSA if (alg_k & SSL_kRSA) { + /* Temporary RSA keys only allowed in export ciphersuites */ + if (!SSL_C_IS_EXPORT(s->s3->tmp.new_cipher)) + { + al=SSL_AD_UNEXPECTED_MESSAGE; + SSLerr(SSL_F_SSL3_GET_KEY_EXCHANGE,SSL_R_UNEXPECTED_MESSAGE); + goto f_err; + } if ((rsa=RSA_new()) == NULL) { SSLerr(SSL_F_SSL3_GET_KEY_EXCHANGE,ERR_R_MALLOC_FAILURE); @@ -2174,24 +2175,13 @@ int ssl3_get_new_session_ticket(SSL *s) n=s->method->ssl_get_message(s, SSL3_ST_CR_SESSION_TICKET_A, SSL3_ST_CR_SESSION_TICKET_B, - -1, + SSL3_MT_NEWSESSION_TICKET, 16384, &ok); if (!ok) return((int)n); - if (s->s3->tmp.message_type == SSL3_MT_FINISHED) - { - s->s3->tmp.reuse_message=1; - return(1); - } - if (s->s3->tmp.message_type != SSL3_MT_NEWSESSION_TICKET) - { - al=SSL_AD_UNEXPECTED_MESSAGE; - SSLerr(SSL_F_SSL3_GET_NEW_SESSION_TICKET,SSL_R_BAD_MESSAGE_TYPE); - goto f_err; - } if (n < 6) { /* need at least ticket_lifetime_hint + ticket length */ @@ -2223,7 +2213,7 @@ int ssl3_get_new_session_ticket(SSL *s) } memcpy(s->session->tlsext_tick, p, ticklen); s->session->tlsext_ticklen = ticklen; - /* There are two ways to detect a resumed ticket sesion. + /* There are two ways to detect a resumed ticket session. * One is to set an appropriate session ID and then the server * must return a match in ServerHello. This allows the normal * client session ID matching to work and we know much @@ -2462,7 +2452,7 @@ int ssl3_send_client_key_exchange(SSL *s) EVP_CIPHER_CTX_init(&ciph_ctx); #ifdef KSSL_DEBUG - printf("ssl3_send_client_key_exchange(%lx & %lx)\n", + fprintf(stderr,"ssl3_send_client_key_exchange(%lx & %lx)\n", alg_k, SSL_kKRB5); #endif /* KSSL_DEBUG */ @@ -2478,9 +2468,9 @@ int ssl3_send_client_key_exchange(SSL *s) goto err; #ifdef KSSL_DEBUG { - printf("kssl_cget_tkt rtn %d\n", krb5rc); + fprintf(stderr,"kssl_cget_tkt rtn %d\n", krb5rc); if (krb5rc && kssl_err.text) - printf("kssl_cget_tkt kssl_err=%s\n", kssl_err.text); + fprintf(stderr,"kssl_cget_tkt kssl_err=%s\n", kssl_err.text); } #endif /* KSSL_DEBUG */ @@ -3309,6 +3299,12 @@ int ssl3_send_client_certificate(SSL *s) s->state=SSL3_ST_CW_CERT_D; l=ssl3_output_cert_chain(s, (s->s3->tmp.cert_req == 2)?NULL:s->cert->key->x509); + if (!l) + { + SSLerr(SSL_F_SSL3_SEND_CLIENT_CERTIFICATE, ERR_R_INTERNAL_ERROR); + ssl3_send_alert(s,SSL3_AL_FATAL,SSL_AD_INTERNAL_ERROR); + return 0; + } s->init_num=(int)l; s->init_off=0; } @@ -3478,40 +3474,9 @@ int ssl3_send_next_proto(SSL *s) } return ssl3_do_write(s, SSL3_RT_HANDSHAKE); -} + } #endif /* !OPENSSL_NO_TLSEXT && !OPENSSL_NO_NEXTPROTONEG */ -/* Check to see if handshake is full or resumed. Usually this is just a - * case of checking to see if a cache hit has occurred. In the case of - * session tickets we have to check the next message to be sure. - */ - -#ifndef OPENSSL_NO_TLSEXT -int ssl3_check_finished(SSL *s) - { - int ok; - long n; - /* If we have no ticket it cannot be a resumed session. */ - if (!s->session->tlsext_tick) - return 1; - /* this function is called when we really expect a Certificate - * message, so permit appropriate message length */ - n=s->method->ssl_get_message(s, - SSL3_ST_CR_CERT_A, - SSL3_ST_CR_CERT_B, - -1, - s->max_cert_list, - &ok); - if (!ok) return((int)n); - s->s3->tmp.reuse_message = 1; - if ((s->s3->tmp.message_type == SSL3_MT_FINISHED) - || (s->s3->tmp.message_type == SSL3_MT_NEWSESSION_TICKET)) - return 2; - - return 1; - } -#endif - int ssl_do_client_cert_cb(SSL *s, X509 **px509, EVP_PKEY **ppkey) { int i = 0; diff --git a/openssl/ssl/s3_enc.c b/openssl/ssl/s3_enc.c index 9db45af7e..89c133e68 100644 --- a/openssl/ssl/s3_enc.c +++ b/openssl/ssl/s3_enc.c @@ -535,7 +535,8 @@ int ssl3_enc(SSL *s, int send) /* otherwise, rec->length >= bs */ } - EVP_Cipher(ds,rec->data,rec->input,l); + if(EVP_Cipher(ds,rec->data,rec->input,l) < 1) + return -1; if (EVP_MD_CTX_md(s->read_hash) != NULL) mac_size = EVP_MD_CTX_size(s->read_hash); diff --git a/openssl/ssl/s3_lib.c b/openssl/ssl/s3_lib.c index 3f1745336..e7cbef481 100644 --- a/openssl/ssl/s3_lib.c +++ b/openssl/ssl/s3_lib.c @@ -3810,17 +3810,17 @@ SSL_CIPHER *ssl3_choose_cipher(SSL *s, STACK_OF(SSL_CIPHER) *clnt, #endif #ifdef CIPHER_DEBUG - printf("Server has %d from %p:\n", sk_SSL_CIPHER_num(srvr), (void *)srvr); + fprintf(stderr, "Server has %d from %p:\n", sk_SSL_CIPHER_num(srvr), (void *)srvr); for(i=0 ; i < sk_SSL_CIPHER_num(srvr) ; ++i) { c=sk_SSL_CIPHER_value(srvr,i); - printf("%p:%s\n",(void *)c,c->name); + fprintf(stderr, "%p:%s\n",(void *)c,c->name); } - printf("Client sent %d from %p:\n", sk_SSL_CIPHER_num(clnt), (void *)clnt); + fprintf(stderr, "Client sent %d from %p:\n", sk_SSL_CIPHER_num(clnt), (void *)clnt); for(i=0 ; i < sk_SSL_CIPHER_num(clnt) ; ++i) { c=sk_SSL_CIPHER_value(clnt,i); - printf("%p:%s\n",(void *)c,c->name); + fprintf(stderr, "%p:%s\n",(void *)c,c->name); } #endif @@ -3860,7 +3860,7 @@ SSL_CIPHER *ssl3_choose_cipher(SSL *s, STACK_OF(SSL_CIPHER) *clnt, #endif #ifdef KSSL_DEBUG -/* printf("ssl3_choose_cipher %d alg= %lx\n", i,c->algorithms);*/ +/* fprintf(stderr,"ssl3_choose_cipher %d alg= %lx\n", i,c->algorithms);*/ #endif /* KSSL_DEBUG */ alg_k=c->algorithm_mkey; @@ -3883,7 +3883,7 @@ SSL_CIPHER *ssl3_choose_cipher(SSL *s, STACK_OF(SSL_CIPHER) *clnt, { ok = (alg_k & emask_k) && (alg_a & emask_a); #ifdef CIPHER_DEBUG - printf("%d:[%08lX:%08lX:%08lX:%08lX]%p:%s (export)\n",ok,alg_k,alg_a,emask_k,emask_a, + fprintf(stderr, "%d:[%08lX:%08lX:%08lX:%08lX]%p:%s (export)\n",ok,alg_k,alg_a,emask_k,emask_a, (void *)c,c->name); #endif } @@ -3891,7 +3891,7 @@ SSL_CIPHER *ssl3_choose_cipher(SSL *s, STACK_OF(SSL_CIPHER) *clnt, { ok = (alg_k & mask_k) && (alg_a & mask_a); #ifdef CIPHER_DEBUG - printf("%d:[%08lX:%08lX:%08lX:%08lX]%p:%s\n",ok,alg_k,alg_a,mask_k,mask_a,(void *)c, + fprintf(stderr, "%d:[%08lX:%08lX:%08lX:%08lX]%p:%s\n",ok,alg_k,alg_a,mask_k,mask_a,(void *)c, c->name); #endif } @@ -4000,6 +4000,7 @@ SSL_CIPHER *ssl3_choose_cipher(SSL *s, STACK_OF(SSL_CIPHER) *clnt, } ok = ok && ec_ok; } +#ifndef OPENSSL_NO_ECDH if ( /* if we are considering an ECC cipher suite that uses an ephemeral EC key */ (alg_k & SSL_kEECDH) @@ -4047,6 +4048,7 @@ SSL_CIPHER *ssl3_choose_cipher(SSL *s, STACK_OF(SSL_CIPHER) *clnt, } ok = ok && ec_ok; } +#endif /* OPENSSL_NO_ECDH */ #endif /* OPENSSL_NO_EC */ #endif /* OPENSSL_NO_TLSEXT */ diff --git a/openssl/ssl/s3_meth.c b/openssl/ssl/s3_meth.c index cdddb17b6..4dec7033d 100644 --- a/openssl/ssl/s3_meth.c +++ b/openssl/ssl/s3_meth.c @@ -60,7 +60,7 @@ #include <openssl/objects.h> #include "ssl_locl.h" -static const SSL_METHOD *ssl3_get_method(int ver); +#ifndef OPENSSL_NO_SSL3_METHOD static const SSL_METHOD *ssl3_get_method(int ver) { if (ver == SSL3_VERSION) @@ -73,5 +73,4 @@ IMPLEMENT_ssl3_meth_func(SSLv3_method, ssl3_accept, ssl3_connect, ssl3_get_method) - - +#endif diff --git a/openssl/ssl/s3_pkt.c b/openssl/ssl/s3_pkt.c index 4c9285f35..1ec9e6ea4 100644 --- a/openssl/ssl/s3_pkt.c +++ b/openssl/ssl/s3_pkt.c @@ -183,6 +183,8 @@ int ssl3_read_n(SSL *s, int n, int max, int extend) * at once (as long as it fits into the buffer). */ if (SSL_version(s) == DTLS1_VERSION || SSL_version(s) == DTLS1_BAD_VER) { + if (left == 0 && extend) + return 0; if (left > 0 && n > left) n = left; } @@ -856,8 +858,7 @@ static int do_ssl3_write(SSL *s, int type, const unsigned char *buf, wr->length += eivlen; } - /* ssl3_enc can only have an error on read */ - s->method->ssl3_enc->enc(s,1); + if(s->method->ssl3_enc->enc(s,1)<1) goto err; /* record length after mac and block padding */ s2n(wr->length,plen); diff --git a/openssl/ssl/s3_srvr.c b/openssl/ssl/s3_srvr.c index c23d98708..fadca74ec 100644 --- a/openssl/ssl/s3_srvr.c +++ b/openssl/ssl/s3_srvr.c @@ -170,6 +170,7 @@ #endif #include <openssl/md5.h> +#ifndef OPENSSL_NO_SSL3_METHOD static const SSL_METHOD *ssl3_get_server_method(int ver); static const SSL_METHOD *ssl3_get_server_method(int ver) @@ -180,6 +181,12 @@ static const SSL_METHOD *ssl3_get_server_method(int ver) return(NULL); } +IMPLEMENT_ssl3_meth_func(SSLv3_server_method, + ssl3_accept, + ssl_undefined_function, + ssl3_get_server_method) +#endif + #ifndef OPENSSL_NO_SRP static int ssl_check_srp_ext_ClientHello(SSL *s, int *al) { @@ -206,11 +213,6 @@ static int ssl_check_srp_ext_ClientHello(SSL *s, int *al) } #endif -IMPLEMENT_ssl3_meth_func(SSLv3_server_method, - ssl3_accept, - ssl_undefined_function, - ssl3_get_server_method) - int ssl3_accept(SSL *s) { BUF_MEM *buf; @@ -284,6 +286,7 @@ int ssl3_accept(SSL *s) } if (!BUF_MEM_grow(buf,SSL3_RT_MAX_PLAIN_LENGTH)) { + BUF_MEM_free(buf); ret= -1; goto end; } @@ -298,6 +301,9 @@ int ssl3_accept(SSL *s) s->init_num=0; s->s3->flags &= ~SSL3_FLAGS_SGC_RESTART_DONE; + s->s3->flags &= ~SSL3_FLAGS_CCS_OK; + /* Should have been reset by ssl3_get_finished, too. */ + s->s3->change_cipher_spec = 0; if (s->state != SSL_ST_RENEGOTIATE) { @@ -441,20 +447,11 @@ int ssl3_accept(SSL *s) case SSL3_ST_SW_KEY_EXCH_B: alg_k = s->s3->tmp.new_cipher->algorithm_mkey; - /* clear this, it may get reset by - * send_server_key_exchange */ - if ((s->options & SSL_OP_EPHEMERAL_RSA) -#ifndef OPENSSL_NO_KRB5 - && !(alg_k & SSL_kKRB5) -#endif /* OPENSSL_NO_KRB5 */ - ) - /* option SSL_OP_EPHEMERAL_RSA sends temporary RSA key - * even when forbidden by protocol specs - * (handshake may fail as clients are not required to - * be able to handle this) */ - s->s3->tmp.use_rsa_tmp=1; - else - s->s3->tmp.use_rsa_tmp=0; + /* + * clear this, it may get reset by + * send_server_key_exchange + */ + s->s3->tmp.use_rsa_tmp=0; /* only send if a DH key exchange, fortezza or @@ -468,7 +465,7 @@ int ssl3_accept(SSL *s) * server certificate contains the server's * public key for key exchange. */ - if (s->s3->tmp.use_rsa_tmp + if (0 /* PSK: send ServerKeyExchange if PSK identity * hint if provided */ #ifndef OPENSSL_NO_PSK @@ -674,8 +671,14 @@ int ssl3_accept(SSL *s) case SSL3_ST_SR_CERT_VRFY_A: case SSL3_ST_SR_CERT_VRFY_B: - - s->s3->flags |= SSL3_FLAGS_CCS_OK; + /* + * This *should* be the first time we enable CCS, but be + * extra careful about surrounding code changes. We need + * to set this here because we don't know if we're + * expecting a CertificateVerify or not. + */ + if (!s->s3->change_cipher_spec) + s->s3->flags |= SSL3_FLAGS_CCS_OK; /* we should decide if we expected this one */ ret=ssl3_get_cert_verify(s); if (ret <= 0) goto end; @@ -694,6 +697,19 @@ int ssl3_accept(SSL *s) #if !defined(OPENSSL_NO_TLSEXT) && !defined(OPENSSL_NO_NEXTPROTONEG) case SSL3_ST_SR_NEXT_PROTO_A: case SSL3_ST_SR_NEXT_PROTO_B: + /* + * Enable CCS for resumed handshakes with NPN. + * In a full handshake with NPN, we end up here through + * SSL3_ST_SR_CERT_VRFY_B, where SSL3_FLAGS_CCS_OK was + * already set. Receiving a CCS clears the flag, so make + * sure not to re-enable it to ban duplicates. + * s->s3->change_cipher_spec is set when a CCS is + * processed in s3_pkt.c, and remains set until + * the client's Finished message is read. + */ + if (!s->s3->change_cipher_spec) + s->s3->flags |= SSL3_FLAGS_CCS_OK; + ret=ssl3_get_next_proto(s); if (ret <= 0) goto end; s->init_num = 0; @@ -703,7 +719,18 @@ int ssl3_accept(SSL *s) case SSL3_ST_SR_FINISHED_A: case SSL3_ST_SR_FINISHED_B: - s->s3->flags |= SSL3_FLAGS_CCS_OK; + /* + * Enable CCS for resumed handshakes without NPN. + * In a full handshake, we end up here through + * SSL3_ST_SR_CERT_VRFY_B, where SSL3_FLAGS_CCS_OK was + * already set. Receiving a CCS clears the flag, so make + * sure not to re-enable it to ban duplicates. + * s->s3->change_cipher_spec is set when a CCS is + * processed in s3_pkt.c, and remains set until + * the client's Finished message is read. + */ + if (!s->s3->change_cipher_spec) + s->s3->flags |= SSL3_FLAGS_CCS_OK; ret=ssl3_get_finished(s,SSL3_ST_SR_FINISHED_A, SSL3_ST_SR_FINISHED_B); if (ret <= 0) goto end; @@ -775,7 +802,6 @@ int ssl3_accept(SSL *s) #else if (s->s3->next_proto_neg_seen) { - s->s3->flags |= SSL3_FLAGS_CCS_OK; s->s3->tmp.next_state=SSL3_ST_SR_NEXT_PROTO_A; } else @@ -1017,7 +1043,16 @@ int ssl3_get_client_hello(SSL *s) else { i=ssl_get_prev_session(s, p, j, d + n); - if (i == 1) + /* + * Only resume if the session's version matches the negotiated + * version. + * RFC 5246 does not provide much useful advice on resumption + * with a different protocol version. It doesn't forbid it but + * the sanity of such behaviour would be questionable. + * In practice, clients do not accept a version mismatch and + * will abort the handshake with an error. + */ + if (i == 1 && s->version == s->session->ssl_version) { /* previous session */ s->hit=1; } @@ -1112,14 +1147,15 @@ int ssl3_get_client_hello(SSL *s) id=s->session->cipher->id; #ifdef CIPHER_DEBUG - printf("client sent %d ciphers\n",sk_num(ciphers)); + fprintf(stderr,"client sent %d ciphers\n",sk_SSL_CIPHER_num(ciphers)); #endif for (i=0; i<sk_SSL_CIPHER_num(ciphers); i++) { c=sk_SSL_CIPHER_value(ciphers,i); #ifdef CIPHER_DEBUG - printf("client [%2d of %2d]:%s\n", - i,sk_num(ciphers),SSL_CIPHER_get_name(c)); + fprintf(stderr,"client [%2d of %2d]:%s\n", + i,sk_SSL_CIPHER_num(ciphers), + SSL_CIPHER_get_name(c)); #endif if (c->id == id) { @@ -2171,6 +2207,7 @@ int ssl3_get_client_key_exchange(SSL *s) unsigned char rand_premaster_secret[SSL_MAX_MASTER_KEY_LENGTH]; int decrypt_len; unsigned char decrypt_good, version_good; + size_t j; /* FIX THIS UP EAY EAY EAY EAY */ if (s->s3->tmp.use_rsa_tmp) @@ -2209,8 +2246,9 @@ int ssl3_get_client_key_exchange(SSL *s) { if (!(s->options & SSL_OP_TLS_D5_BUG)) { + al = SSL_AD_DECODE_ERROR; SSLerr(SSL_F_SSL3_GET_CLIENT_KEY_EXCHANGE,SSL_R_TLS_RSA_ENCRYPTED_VALUE_LENGTH_IS_WRONG); - goto err; + goto f_err; } else p-=2; @@ -2219,6 +2257,20 @@ int ssl3_get_client_key_exchange(SSL *s) n=i; } + /* + * Reject overly short RSA ciphertext because we want to be sure + * that the buffer size makes it safe to iterate over the entire + * size of a premaster secret (SSL_MAX_MASTER_KEY_LENGTH). The + * actual expected size is larger due to RSA padding, but the + * bound is sufficient to be safe. + */ + if (n < SSL_MAX_MASTER_KEY_LENGTH) + { + al = SSL_AD_DECRYPT_ERROR; + SSLerr(SSL_F_SSL3_GET_CLIENT_KEY_EXCHANGE, SSL_R_TLS_RSA_ENCRYPTED_VALUE_LENGTH_IS_WRONG); + goto f_err; + } + /* We must not leak whether a decryption failure occurs because * of Bleichenbacher's attack on PKCS #1 v1.5 RSA padding (see * RFC 2246, section 7.4.7.1). The code follows that advice of @@ -2266,19 +2318,23 @@ int ssl3_get_client_key_exchange(SSL *s) * to remain non-zero (0xff). */ decrypt_good &= version_good; - /* Now copy rand_premaster_secret over p using - * decrypt_good_mask. */ - for (i = 0; i < (int) sizeof(rand_premaster_secret); i++) + /* + * Now copy rand_premaster_secret over from p using + * decrypt_good_mask. If decryption failed, then p does not + * contain valid plaintext, however, a check above guarantees + * it is still sufficiently large to read from. + */ + for (j = 0; j < sizeof(rand_premaster_secret); j++) { - p[i] = constant_time_select_8(decrypt_good, p[i], - rand_premaster_secret[i]); + p[j] = constant_time_select_8(decrypt_good, p[j], + rand_premaster_secret[j]); } s->session->master_key_length= s->method->ssl3_enc->generate_master_secret(s, s->session->master_key, - p,i); - OPENSSL_cleanse(p,i); + p,sizeof(rand_premaster_secret)); + OPENSSL_cleanse(p,sizeof(rand_premaster_secret)); } else #endif @@ -2420,10 +2476,10 @@ int ssl3_get_client_key_exchange(SSL *s) &kssl_err)) != 0) { #ifdef KSSL_DEBUG - printf("kssl_sget_tkt rtn %d [%d]\n", + fprintf(stderr,"kssl_sget_tkt rtn %d [%d]\n", krb5rc, kssl_err.reason); if (kssl_err.text) - printf("kssl_err text= %s\n", kssl_err.text); + fprintf(stderr,"kssl_err text= %s\n", kssl_err.text); #endif /* KSSL_DEBUG */ SSLerr(SSL_F_SSL3_GET_CLIENT_KEY_EXCHANGE, kssl_err.reason); @@ -2437,10 +2493,10 @@ int ssl3_get_client_key_exchange(SSL *s) &authtime, &kssl_err)) != 0) { #ifdef KSSL_DEBUG - printf("kssl_check_authent rtn %d [%d]\n", + fprintf(stderr,"kssl_check_authent rtn %d [%d]\n", krb5rc, kssl_err.reason); if (kssl_err.text) - printf("kssl_err text= %s\n", kssl_err.text); + fprintf(stderr,"kssl_err text= %s\n", kssl_err.text); #endif /* KSSL_DEBUG */ SSLerr(SSL_F_SSL3_GET_CLIENT_KEY_EXCHANGE, kssl_err.reason); @@ -2958,7 +3014,7 @@ int ssl3_get_cert_verify(SSL *s) if (s->s3->tmp.message_type != SSL3_MT_CERTIFICATE_VERIFY) { s->s3->tmp.reuse_message=1; - if ((peer != NULL) && (type & EVP_PKT_SIGN)) + if (peer != NULL) { al=SSL_AD_UNEXPECTED_MESSAGE; SSLerr(SSL_F_SSL3_GET_CERT_VERIFY,SSL_R_MISSING_VERIFY_MESSAGE); @@ -3362,6 +3418,11 @@ int ssl3_send_server_certificate(SSL *s) } l=ssl3_output_cert_chain(s,x); + if (!l) + { + SSLerr(SSL_F_SSL3_SEND_SERVER_CERTIFICATE,ERR_R_INTERNAL_ERROR); + return(0); + } s->state=SSL3_ST_SW_CERT_B; s->init_num=(int)l; s->init_off=0; diff --git a/openssl/ssl/srtp.h b/openssl/ssl/srtp.h index 24f23309d..096b624d0 100644 --- a/openssl/ssl/srtp.h +++ b/openssl/ssl/srtp.h @@ -1,4 +1,4 @@ -/* ssl/tls1.h */ +/* ssl/srtp.h */ /* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com) * All rights reserved. * @@ -118,6 +118,8 @@ #ifndef HEADER_D1_SRTP_H #define HEADER_D1_SRTP_H +#include <openssl/ssl.h> + #ifdef __cplusplus extern "C" { #endif diff --git a/openssl/ssl/ssl.h b/openssl/ssl/ssl.h index b78a1cce4..2ba592320 100644 --- a/openssl/ssl/ssl.h +++ b/openssl/ssl/ssl.h @@ -596,9 +596,8 @@ struct ssl_session_st #define SSL_OP_SINGLE_ECDH_USE 0x00080000L /* If set, always create a new key when using tmp_dh parameters */ #define SSL_OP_SINGLE_DH_USE 0x00100000L -/* Set to always use the tmp_rsa key when doing RSA operations, - * even when this violates protocol specs */ -#define SSL_OP_EPHEMERAL_RSA 0x00200000L +/* Does nothing: retained for compatibiity */ +#define SSL_OP_EPHEMERAL_RSA 0x0 /* Set on servers to choose the cipher according to the server's * preferences */ #define SSL_OP_CIPHER_SERVER_PREFERENCE 0x00400000L @@ -654,8 +653,13 @@ struct ssl_session_st #define SSL_MODE_SEND_CLIENTHELLO_TIME 0x00000020L #define SSL_MODE_SEND_SERVERHELLO_TIME 0x00000040L /* Send TLS_FALLBACK_SCSV in the ClientHello. - * To be set by applications that reconnect with a downgraded protocol - * version; see draft-ietf-tls-downgrade-scsv-00 for details. */ + * To be set only by applications that reconnect with a downgraded protocol + * version; see draft-ietf-tls-downgrade-scsv-00 for details. + * + * DO NOT ENABLE THIS if your application attempts a normal handshake. + * Only use this in explicit fallback retries, following the guidance + * in draft-ietf-tls-downgrade-scsv-00. + */ #define SSL_MODE_SEND_FALLBACK_SCSV 0x00000080L /* Note: SSL[_CTX]_set_{options,mode} use |= op on the previous value, @@ -688,6 +692,10 @@ struct ssl_session_st SSL_ctrl((ssl),SSL_CTRL_MODE,0,NULL) #define SSL_set_mtu(ssl, mtu) \ SSL_ctrl((ssl),SSL_CTRL_SET_MTU,(mtu),NULL) +#define DTLS_set_link_mtu(ssl, mtu) \ + SSL_ctrl((ssl),DTLS_CTRL_SET_LINK_MTU,(mtu),NULL) +#define DTLS_get_link_min_mtu(ssl) \ + SSL_ctrl((ssl),DTLS_CTRL_GET_LINK_MIN_MTU,0,NULL) #define SSL_get_secure_renegotiation_support(ssl) \ SSL_ctrl((ssl), SSL_CTRL_GET_RI_SUPPORT, 0, NULL) @@ -1627,6 +1635,8 @@ DECLARE_PEM_rw(SSL_SESSION, SSL_SESSION) #define SSL_CTRL_CLEAR_EXTRA_CHAIN_CERTS 83 #define SSL_CTRL_CHECK_PROTO_VERSION 119 +#define DTLS_CTRL_SET_LINK_MTU 120 +#define DTLS_CTRL_GET_LINK_MIN_MTU 121 #define DTLSv1_get_timeout(ssl, arg) \ SSL_ctrl(ssl,DTLS_CTRL_GET_TIMEOUT,0, (void *)arg) @@ -1878,13 +1888,15 @@ const SSL_METHOD *SSLv2_server_method(void); /* SSLv2 */ const SSL_METHOD *SSLv2_client_method(void); /* SSLv2 */ #endif +#ifndef OPENSSL_NO_SSL3_METHOD const SSL_METHOD *SSLv3_method(void); /* SSLv3 */ const SSL_METHOD *SSLv3_server_method(void); /* SSLv3 */ const SSL_METHOD *SSLv3_client_method(void); /* SSLv3 */ +#endif -const SSL_METHOD *SSLv23_method(void); /* SSLv3 but can rollback to v2 */ -const SSL_METHOD *SSLv23_server_method(void); /* SSLv3 but can rollback to v2 */ -const SSL_METHOD *SSLv23_client_method(void); /* SSLv3 but can rollback to v2 */ +const SSL_METHOD *SSLv23_method(void); /* Negotiate highest available SSL/TLS version */ +const SSL_METHOD *SSLv23_server_method(void); /* Negotiate highest available SSL/TLS version */ +const SSL_METHOD *SSLv23_client_method(void); /* Negotiate highest available SSL/TLS version */ const SSL_METHOD *TLSv1_method(void); /* TLSv1.0 */ const SSL_METHOD *TLSv1_server_method(void); /* TLSv1.0 */ diff --git a/openssl/ssl/ssl3.h b/openssl/ssl/ssl3.h index 85f150409..6fad054e0 100644 --- a/openssl/ssl/ssl3.h +++ b/openssl/ssl/ssl3.h @@ -393,8 +393,12 @@ typedef struct ssl3_buffer_st #define TLS1_FLAGS_TLS_PADDING_BUG 0x0008 #define TLS1_FLAGS_SKIP_CERT_VERIFY 0x0010 #define TLS1_FLAGS_KEEP_HANDSHAKE 0x0020 +/* + * Set when the handshake is ready to process peer's ChangeCipherSpec message. + * Cleared after the message has been processed. + */ #define SSL3_FLAGS_CCS_OK 0x0080 - + /* SSL3_FLAGS_SGC_RESTART_DONE is set when we * restart a handshake because of MS SGC and so prevents us * from restarting the handshake in a loop. It's reset on a @@ -456,8 +460,11 @@ typedef struct ssl3_state_st * and freed and MD_CTX-es for all required digests are stored in * this array */ EVP_MD_CTX **handshake_dgst; - /* this is set whenerver we see a change_cipher_spec message - * come in when we are not looking for one */ + /* + * Set whenever an expected ChangeCipherSpec message is processed. + * Unset when the peer's Finished message is received. + * Unexpected ChangeCipherSpec messages trigger a fatal alert. + */ int change_cipher_spec; int warn_alert; diff --git a/openssl/ssl/ssl_cert.c b/openssl/ssl/ssl_cert.c index 5123a8918..cef3ff46e 100644 --- a/openssl/ssl/ssl_cert.c +++ b/openssl/ssl/ssl_cert.c @@ -286,35 +286,6 @@ CERT *ssl_cert_dup(CERT *cert) ret->pkeys[i].privatekey = cert->pkeys[i].privatekey; CRYPTO_add(&ret->pkeys[i].privatekey->references, 1, CRYPTO_LOCK_EVP_PKEY); - - switch(i) - { - /* If there was anything special to do for - * certain types of keys, we'd do it here. - * (Nothing at the moment, I think.) */ - - case SSL_PKEY_RSA_ENC: - case SSL_PKEY_RSA_SIGN: - /* We have an RSA key. */ - break; - - case SSL_PKEY_DSA_SIGN: - /* We have a DSA key. */ - break; - - case SSL_PKEY_DH_RSA: - case SSL_PKEY_DH_DSA: - /* We have a DH key. */ - break; - - case SSL_PKEY_ECC: - /* We have an ECC key */ - break; - - default: - /* Can't happen. */ - SSLerr(SSL_F_SSL_CERT_DUP, SSL_R_LIBRARY_BUG); - } } } diff --git a/openssl/ssl/ssl_ciph.c b/openssl/ssl/ssl_ciph.c index 8188ff5d9..b767361e7 100644 --- a/openssl/ssl/ssl_ciph.c +++ b/openssl/ssl/ssl_ciph.c @@ -814,7 +814,7 @@ static void ssl_cipher_collect_ciphers(const SSL_METHOD *ssl_method, co_list[co_list_num].active = 0; co_list_num++; #ifdef KSSL_DEBUG - printf("\t%d: %s %lx %lx %lx\n",i,c->name,c->id,c->algorithm_mkey,c->algorithm_auth); + fprintf(stderr,"\t%d: %s %lx %lx %lx\n",i,c->name,c->id,c->algorithm_mkey,c->algorithm_auth); #endif /* KSSL_DEBUG */ /* if (!sk_push(ca_list,(char *)c)) goto err; @@ -931,7 +931,7 @@ static void ssl_cipher_apply_rule(unsigned long cipher_id, int reverse = 0; #ifdef CIPHER_DEBUG - printf("Applying rule %d with %08lx/%08lx/%08lx/%08lx/%08lx %08lx (%d)\n", + fprintf(stderr, "Applying rule %d with %08lx/%08lx/%08lx/%08lx/%08lx %08lx (%d)\n", rule, alg_mkey, alg_auth, alg_enc, alg_mac, alg_ssl, algo_strength, strength_bits); #endif @@ -977,7 +977,7 @@ static void ssl_cipher_apply_rule(unsigned long cipher_id, else { #ifdef CIPHER_DEBUG - printf("\nName: %s:\nAlgo = %08lx/%08lx/%08lx/%08lx/%08lx Algo_strength = %08lx\n", cp->name, cp->algorithm_mkey, cp->algorithm_auth, cp->algorithm_enc, cp->algorithm_mac, cp->algorithm_ssl, cp->algo_strength); + fprintf(stderr, "\nName: %s:\nAlgo = %08lx/%08lx/%08lx/%08lx/%08lx Algo_strength = %08lx\n", cp->name, cp->algorithm_mkey, cp->algorithm_auth, cp->algorithm_enc, cp->algorithm_mac, cp->algorithm_ssl, cp->algo_strength); #endif if (alg_mkey && !(alg_mkey & cp->algorithm_mkey)) @@ -997,7 +997,7 @@ static void ssl_cipher_apply_rule(unsigned long cipher_id, } #ifdef CIPHER_DEBUG - printf("Action = %d\n", rule); + fprintf(stderr, "Action = %d\n", rule); #endif /* add the cipher if it has not been added yet. */ @@ -1386,7 +1386,7 @@ STACK_OF(SSL_CIPHER) *ssl_create_cipher_list(const SSL_METHOD *ssl_method, */ num_of_ciphers = ssl_method->num_ciphers(); #ifdef KSSL_DEBUG - printf("ssl_create_cipher_list() for %d ciphers\n", num_of_ciphers); + fprintf(stderr,"ssl_create_cipher_list() for %d ciphers\n", num_of_ciphers); #endif /* KSSL_DEBUG */ co_list = (CIPHER_ORDER *)OPENSSL_malloc(sizeof(CIPHER_ORDER) * num_of_ciphers); if (co_list == NULL) @@ -1513,7 +1513,7 @@ STACK_OF(SSL_CIPHER) *ssl_create_cipher_list(const SSL_METHOD *ssl_method, { sk_SSL_CIPHER_push(cipherstack, curr->cipher); #ifdef CIPHER_DEBUG - printf("<%s>\n",curr->cipher->name); + fprintf(stderr, "<%s>\n",curr->cipher->name); #endif } } diff --git a/openssl/ssl/ssl_lib.c b/openssl/ssl/ssl_lib.c index 3f66fc061..4a62b4a79 100644 --- a/openssl/ssl/ssl_lib.c +++ b/openssl/ssl/ssl_lib.c @@ -383,13 +383,7 @@ SSL *SSL_new(SSL_CTX *ctx) return(s); err: if (s != NULL) - { - if (s->cert != NULL) - ssl_cert_free(s->cert); - if (s->ctx != NULL) - SSL_CTX_free(s->ctx); /* decrement reference count */ - OPENSSL_free(s); - } + SSL_free(s); SSLerr(SSL_F_SSL_NEW,ERR_R_MALLOC_FAILURE); return(NULL); } @@ -1080,19 +1074,6 @@ long SSL_ctrl(SSL *s,int cmd,long larg,void *parg) l=s->max_cert_list; s->max_cert_list=larg; return(l); - case SSL_CTRL_SET_MTU: -#ifndef OPENSSL_NO_DTLS1 - if (larg < (long)dtls1_min_mtu()) - return 0; -#endif - - if (SSL_version(s) == DTLS1_VERSION || - SSL_version(s) == DTLS1_BAD_VER) - { - s->d1->mtu = larg; - return larg; - } - return 0; case SSL_CTRL_SET_MAX_SEND_FRAGMENT: if (larg < 512 || larg > SSL3_RT_MAX_PLAIN_LENGTH) return 0; @@ -1507,6 +1488,7 @@ STACK_OF(SSL_CIPHER) *ssl_bytes_to_cipher_list(SSL *s,unsigned char *p,int num, ssl3_send_alert(s,SSL3_AL_FATAL,SSL_AD_INAPPROPRIATE_FALLBACK); goto err; } + p += n; continue; } @@ -2112,7 +2094,7 @@ void ssl_set_cert_masks(CERT *c, const SSL_CIPHER *cipher) #ifdef CIPHER_DEBUG - printf("rt=%d rte=%d dht=%d ecdht=%d re=%d ree=%d rs=%d ds=%d dhr=%d dhd=%d\n", + fprintf(stderr,"rt=%d rte=%d dht=%d ecdht=%d re=%d ree=%d rs=%d ds=%d dhr=%d dhd=%d\n", rsa_tmp,rsa_tmp_export,dh_tmp,have_ecdh_tmp, rsa_enc,rsa_enc_export,rsa_sign,dsa_sign,dh_rsa,dh_dsa); #endif @@ -2996,10 +2978,32 @@ SSL_CTX *SSL_set_SSL_CTX(SSL *ssl, SSL_CTX* ctx) } ssl_cert_free(ocert); } + + /* + * Program invariant: |sid_ctx| has fixed size (SSL_MAX_SID_CTX_LENGTH), + * so setter APIs must prevent invalid lengths from entering the system. + */ + OPENSSL_assert(ssl->sid_ctx_length <= sizeof(ssl->sid_ctx)); + + /* + * If the session ID context matches that of the parent SSL_CTX, + * inherit it from the new SSL_CTX as well. If however the context does + * not match (i.e., it was set per-ssl with SSL_set_session_id_context), + * leave it unchanged. + */ + if ((ssl->ctx != NULL) && + (ssl->sid_ctx_length == ssl->ctx->sid_ctx_length) && + (memcmp(ssl->sid_ctx, ssl->ctx->sid_ctx, ssl->sid_ctx_length) == 0)) + { + ssl->sid_ctx_length = ctx->sid_ctx_length; + memcpy(&ssl->sid_ctx, &ctx->sid_ctx, sizeof(ssl->sid_ctx)); + } + CRYPTO_add(&ctx->references,1,CRYPTO_LOCK_SSL_CTX); if (ssl->ctx != NULL) SSL_CTX_free(ssl->ctx); /* decrement reference count */ ssl->ctx = ctx; + return(ssl->ctx); } diff --git a/openssl/ssl/ssl_locl.h b/openssl/ssl/ssl_locl.h index 98888d2df..1b8fa8c4c 100644 --- a/openssl/ssl/ssl_locl.h +++ b/openssl/ssl/ssl_locl.h @@ -864,7 +864,7 @@ int ssl_fill_hello_random(SSL *s, int server, unsigned char *field, int len); int ssl2_enc_init(SSL *s, int client); int ssl2_generate_key_material(SSL *s); -void ssl2_enc(SSL *s,int send_data); +int ssl2_enc(SSL *s,int send_data); void ssl2_mac(SSL *s,unsigned char *mac,int send_data); const SSL_CIPHER *ssl2_get_cipher_by_char(const unsigned char *p); int ssl2_put_cipher_by_char(const SSL_CIPHER *c,unsigned char *p); @@ -997,7 +997,9 @@ void dtls1_stop_timer(SSL *s); int dtls1_is_timer_expired(SSL *s); void dtls1_double_timeout(SSL *s); int dtls1_send_newsession_ticket(SSL *s); -unsigned int dtls1_min_mtu(void); +unsigned int dtls1_min_mtu(SSL *s); +unsigned int dtls1_link_min_mtu(void); +void dtls1_hm_fragment_free(hm_fragment *frag); /* some client-only functions */ int ssl3_client_hello(SSL *s); @@ -1014,7 +1016,6 @@ int ssl3_get_key_exchange(SSL *s); int ssl3_get_server_certificate(SSL *s); int ssl3_check_cert_and_algorithm(SSL *s); #ifndef OPENSSL_NO_TLSEXT -int ssl3_check_finished(SSL *s); # ifndef OPENSSL_NO_NEXTPROTONEG int ssl3_send_next_proto(SSL *s); # endif diff --git a/openssl/ssl/ssl_sess.c b/openssl/ssl/ssl_sess.c index ad40fadd0..235f92d82 100644 --- a/openssl/ssl/ssl_sess.c +++ b/openssl/ssl/ssl_sess.c @@ -335,7 +335,21 @@ int ssl_get_new_session(SSL *s, int session) return(0); } #ifndef OPENSSL_NO_TLSEXT - /* If RFC4507 ticket use empty session ID */ + /* + * If RFC5077 ticket, use empty session ID (as server). + * Note that: + * (a) ssl_get_prev_session() does lookahead into the + * ClientHello extensions to find the session ticket. + * When ssl_get_prev_session() fails, s3_srvr.c calls + * ssl_get_new_session() in ssl3_get_client_hello(). + * At that point, it has not yet parsed the extensions, + * however, because of the lookahead, it already knows + * whether a ticket is expected or not. + * + * (b) s3_clnt.c calls ssl_get_new_session() before parsing + * ServerHello extensions, and before recording the session + * ID received from the server, so this block is a noop. + */ if (s->tlsext_ticket_expected) { ss->session_id_length = 0; diff --git a/openssl/ssl/ssltest.c b/openssl/ssl/ssltest.c index 4f80be8ee..08889569f 100644 --- a/openssl/ssl/ssltest.c +++ b/openssl/ssl/ssltest.c @@ -345,7 +345,7 @@ static void sv_usage(void) #ifndef OPENSSL_NO_SSL2 fprintf(stderr," -ssl2 - use SSLv2\n"); #endif -#ifndef OPENSSL_NO_SSL3 +#ifndef OPENSSL_NO_SSL3_METHOD fprintf(stderr," -ssl3 - use SSLv3\n"); #endif #ifndef OPENSSL_NO_TLS1 @@ -368,7 +368,9 @@ static void sv_usage(void) " Use \"openssl ecparam -list_curves\" for all names\n" \ " (default is sect163r2).\n"); #endif - fprintf(stderr," -test_cipherlist - verifies the order of the ssl cipher lists\n"); + fprintf(stderr," -test_cipherlist - Verifies the order of the ssl cipher lists.\n" + " When this option is requested, the cipherlist\n" + " tests are run instead of handshake tests.\n"); } static void print_details(SSL *c_ssl, const char *prefix) @@ -549,6 +551,7 @@ int main(int argc, char *argv[]) #ifdef OPENSSL_FIPS int fips_mode=0; #endif + int no_protocol = 0; verbose = 0; debug = 0; @@ -658,11 +661,26 @@ int main(int argc, char *argv[]) } #endif else if (strcmp(*argv,"-ssl2") == 0) - ssl2=1; + { +#ifdef OPENSSL_NO_SSL2 + no_protocol = 1; +#endif + ssl2 = 1; + } else if (strcmp(*argv,"-tls1") == 0) - tls1=1; + { +#ifdef OPENSSL_NO_TLS1 + no_protocol = 1; +#endif + tls1 = 1; + } else if (strcmp(*argv,"-ssl3") == 0) - ssl3=1; + { +#ifdef OPENSSL_NO_SSL3_METHOD + no_protocol = 1; +#endif + ssl3 = 1; + } else if (strncmp(*argv,"-num",4) == 0) { if (--argc < 1) goto bad; @@ -781,15 +799,41 @@ bad: goto end; } + /* + * test_cipherlist prevails over protocol switch: we test the cipherlist + * for all enabled protocols. + */ if (test_cipherlist == 1) { /* ensure that the cipher list are correctly sorted and exit */ + fprintf(stdout, "Testing cipherlist order only. Ignoring all " + "other options.\n"); if (do_test_cipherlist() == 0) EXIT(1); ret = 0; goto end; } + if (ssl2 + ssl3 + tls1 > 1) + { + fprintf(stderr, "At most one of -ssl2, -ssl3, or -tls1 should " + "be requested.\n"); + EXIT(1); + } + + /* + * Testing was requested for a compiled-out protocol (e.g. SSLv2). + * Ideally, we would error out, but the generic test wrapper can't know + * when to expect failure. So we do nothing and return success. + */ + if (no_protocol) + { + fprintf(stderr, "Testing was requested for a disabled protocol. " + "Skipping tests.\n"); + ret = 0; + goto end; + } + if (!ssl2 && !ssl3 && !tls1 && number > 1 && !reuse && !force) { fprintf(stderr, "This case cannot work. Use -f to perform " @@ -868,30 +912,25 @@ bad: } #endif -#if !defined(OPENSSL_NO_SSL2) && !defined(OPENSSL_NO_SSL3) +/* At this point, ssl2/ssl3/tls1 is only set if the protocol is available. + * (Otherwise we exit early.) + * However the compiler doesn't know this, so we ifdef. */ +#ifndef OPENSSL_NO_SSL2 if (ssl2) meth=SSLv2_method(); - else - if (tls1) - meth=TLSv1_method(); else +#endif +#ifndef OPENSSL_NO_SSL3 if (ssl3) meth=SSLv3_method(); else - meth=SSLv23_method(); -#else -#ifdef OPENSSL_NO_SSL2 +#endif +#ifndef OPENSSL_NO_TLS1 if (tls1) meth=TLSv1_method(); else - if (ssl3) - meth=SSLv3_method(); - else - meth=SSLv23_method(); -#else - meth=SSLv2_method(); -#endif #endif + meth=SSLv23_method(); c_ctx=SSL_CTX_new(meth); s_ctx=SSL_CTX_new(meth); diff --git a/openssl/ssl/t1_enc.c b/openssl/ssl/t1_enc.c index 1923cf3e9..1308c0344 100644 --- a/openssl/ssl/t1_enc.c +++ b/openssl/ssl/t1_enc.c @@ -303,15 +303,15 @@ static int tls1_generate_key_block(SSL *s, unsigned char *km, s->session->master_key,s->session->master_key_length, km,tmp,num); #ifdef KSSL_DEBUG - printf("tls1_generate_key_block() ==> %d byte master_key =\n\t", + fprintf(stderr,"tls1_generate_key_block() ==> %d byte master_key =\n\t", s->session->master_key_length); { int i; for (i=0; i < s->session->master_key_length; i++) { - printf("%02X", s->session->master_key[i]); + fprintf(stderr,"%02X", s->session->master_key[i]); } - printf("\n"); } + fprintf(stderr,"\n"); } #endif /* KSSL_DEBUG */ return ret; } @@ -349,19 +349,19 @@ int tls1_change_cipher_state(SSL *s, int which) #endif #ifdef KSSL_DEBUG - printf("tls1_change_cipher_state(which= %d) w/\n", which); - printf("\talg= %ld/%ld, comp= %p\n", + fprintf(stderr,"tls1_change_cipher_state(which= %d) w/\n", which); + fprintf(stderr,"\talg= %ld/%ld, comp= %p\n", s->s3->tmp.new_cipher->algorithm_mkey, s->s3->tmp.new_cipher->algorithm_auth, comp); - printf("\tevp_cipher == %p ==? &d_cbc_ede_cipher3\n", c); - printf("\tevp_cipher: nid, blksz= %d, %d, keylen=%d, ivlen=%d\n", + fprintf(stderr,"\tevp_cipher == %p ==? &d_cbc_ede_cipher3\n", c); + fprintf(stderr,"\tevp_cipher: nid, blksz= %d, %d, keylen=%d, ivlen=%d\n", c->nid,c->block_size,c->key_len,c->iv_len); - printf("\tkey_block: len= %d, data= ", s->s3->tmp.key_block_length); + fprintf(stderr,"\tkey_block: len= %d, data= ", s->s3->tmp.key_block_length); { int i; for (i=0; i<s->s3->tmp.key_block_length; i++) - printf("%02x", s->s3->tmp.key_block[i]); printf("\n"); + fprintf(stderr,"%02x", s->s3->tmp.key_block[i]); fprintf(stderr,"\n"); } #endif /* KSSL_DEBUG */ @@ -540,11 +540,11 @@ printf("which = %04X\nmac key=",which); #ifdef KSSL_DEBUG { int i; - printf("EVP_CipherInit_ex(dd,c,key=,iv=,which)\n"); - printf("\tkey= "); for (i=0; i<c->key_len; i++) printf("%02x", key[i]); - printf("\n"); - printf("\t iv= "); for (i=0; i<c->iv_len; i++) printf("%02x", iv[i]); - printf("\n"); + fprintf(stderr,"EVP_CipherInit_ex(dd,c,key=,iv=,which)\n"); + fprintf(stderr,"\tkey= "); for (i=0; i<c->key_len; i++) fprintf(stderr,"%02x", key[i]); + fprintf(stderr,"\n"); + fprintf(stderr,"\t iv= "); for (i=0; i<c->iv_len; i++) fprintf(stderr,"%02x", iv[i]); + fprintf(stderr,"\n"); } #endif /* KSSL_DEBUG */ @@ -591,7 +591,7 @@ int tls1_setup_key_block(SSL *s) int ret=0; #ifdef KSSL_DEBUG - printf ("tls1_setup_key_block()\n"); + fprintf(stderr,"tls1_setup_key_block()\n"); #endif /* KSSL_DEBUG */ if (s->s3->tmp.key_block_length != 0) @@ -740,7 +740,7 @@ int tls1_enc(SSL *s, int send) } #ifdef KSSL_DEBUG - printf("tls1_enc(%d)\n", send); + fprintf(stderr,"tls1_enc(%d)\n", send); #endif /* KSSL_DEBUG */ if ((s->session == NULL) || (ds == NULL) || (enc == NULL)) @@ -812,18 +812,18 @@ int tls1_enc(SSL *s, int send) #ifdef KSSL_DEBUG { unsigned long ui; - printf("EVP_Cipher(ds=%p,rec->data=%p,rec->input=%p,l=%ld) ==>\n", + fprintf(stderr,"EVP_Cipher(ds=%p,rec->data=%p,rec->input=%p,l=%ld) ==>\n", ds,rec->data,rec->input,l); - printf("\tEVP_CIPHER_CTX: %d buf_len, %d key_len [%d %d], %d iv_len\n", + fprintf(stderr,"\tEVP_CIPHER_CTX: %d buf_len, %d key_len [%lu %lu], %d iv_len\n", ds->buf_len, ds->cipher->key_len, DES_KEY_SZ, DES_SCHEDULE_SZ, ds->cipher->iv_len); - printf("\t\tIV: "); - for (i=0; i<ds->cipher->iv_len; i++) printf("%02X", ds->iv[i]); - printf("\n"); - printf("\trec->input="); - for (ui=0; ui<l; ui++) printf(" %02x", rec->input[ui]); - printf("\n"); + fprintf(stderr,"\t\tIV: "); + for (i=0; i<ds->cipher->iv_len; i++) fprintf(stderr,"%02X", ds->iv[i]); + fprintf(stderr,"\n"); + fprintf(stderr,"\trec->input="); + for (ui=0; ui<l; ui++) fprintf(stderr," %02x", rec->input[ui]); + fprintf(stderr,"\n"); } #endif /* KSSL_DEBUG */ @@ -848,9 +848,9 @@ int tls1_enc(SSL *s, int send) #ifdef KSSL_DEBUG { unsigned long i; - printf("\trec->data="); + fprintf(stderr,"\trec->data="); for (i=0; i<l; i++) - printf(" %02x", rec->data[i]); printf("\n"); + fprintf(stderr," %02x", rec->data[i]); fprintf(stderr,"\n"); } #endif /* KSSL_DEBUG */ @@ -1048,10 +1048,10 @@ int tls1_mac(SSL *ssl, unsigned char *md, int send) if (!stream_mac) EVP_MD_CTX_cleanup(&hmac); #ifdef TLS_DEBUG -printf("seq="); -{int z; for (z=0; z<8; z++) printf("%02X ",seq[z]); printf("\n"); } -printf("rec="); -{unsigned int z; for (z=0; z<rec->length; z++) printf("%02X ",rec->data[z]); printf("\n"); } +fprintf(stderr,"seq="); +{int z; for (z=0; z<8; z++) fprintf(stderr,"%02X ",seq[z]); fprintf(stderr,"\n"); } +fprintf(stderr,"rec="); +{unsigned int z; for (z=0; z<rec->length; z++) fprintf(stderr,"%02X ",rec->data[z]); fprintf(stderr,"\n"); } #endif if (ssl->version != DTLS1_VERSION && ssl->version != DTLS1_BAD_VER) @@ -1064,7 +1064,7 @@ printf("rec="); } #ifdef TLS_DEBUG -{unsigned int z; for (z=0; z<md_size; z++) printf("%02X ",md[z]); printf("\n"); } +{unsigned int z; for (z=0; z<md_size; z++) fprintf(stderr,"%02X ",md[z]); fprintf(stderr,"\n"); } #endif return(md_size); } @@ -1078,7 +1078,7 @@ int tls1_generate_master_secret(SSL *s, unsigned char *out, unsigned char *p, #ifdef KSSL_DEBUG - printf ("tls1_generate_master_secret(%p,%p, %p, %d)\n", s,out, p,len); + fprintf(stderr,"tls1_generate_master_secret(%p,%p, %p, %d)\n", s,out, p,len); #endif /* KSSL_DEBUG */ #ifdef TLSEXT_TYPE_opaque_prf_input @@ -1113,7 +1113,7 @@ int tls1_generate_master_secret(SSL *s, unsigned char *out, unsigned char *p, #endif #ifdef KSSL_DEBUG - printf ("tls1_generate_master_secret() complete\n"); + fprintf(stderr,"tls1_generate_master_secret() complete\n"); #endif /* KSSL_DEBUG */ return(SSL3_MASTER_SECRET_SIZE); } @@ -1128,7 +1128,7 @@ int tls1_export_keying_material(SSL *s, unsigned char *out, size_t olen, int rv; #ifdef KSSL_DEBUG - printf ("tls1_export_keying_material(%p,%p,%d,%s,%d,%p,%d)\n", s, out, olen, label, llen, context, contextlen); + fprintf(stderr,"tls1_export_keying_material(%p,%p,%lu,%s,%lu,%p,%lu)\n", s, out, olen, label, llen, context, contextlen); #endif /* KSSL_DEBUG */ buff = OPENSSL_malloc(olen); @@ -1191,7 +1191,7 @@ int tls1_export_keying_material(SSL *s, unsigned char *out, size_t olen, out,buff,olen); #ifdef KSSL_DEBUG - printf ("tls1_export_keying_material() complete\n"); + fprintf(stderr,"tls1_export_keying_material() complete\n"); #endif /* KSSL_DEBUG */ goto ret; err1: diff --git a/openssl/ssl/t1_lib.c b/openssl/ssl/t1_lib.c index d6aff4b68..179b467d4 100644 --- a/openssl/ssl/t1_lib.c +++ b/openssl/ssl/t1_lib.c @@ -204,28 +204,40 @@ static int nid_list[] = static int pref_list[] = { +#ifndef OPENSSL_NO_EC2M NID_sect571r1, /* sect571r1 (14) */ NID_sect571k1, /* sect571k1 (13) */ +#endif NID_secp521r1, /* secp521r1 (25) */ +#ifndef OPENSSL_NO_EC2M NID_sect409k1, /* sect409k1 (11) */ NID_sect409r1, /* sect409r1 (12) */ +#endif NID_secp384r1, /* secp384r1 (24) */ +#ifndef OPENSSL_NO_EC2M NID_sect283k1, /* sect283k1 (9) */ NID_sect283r1, /* sect283r1 (10) */ +#endif NID_secp256k1, /* secp256k1 (22) */ NID_X9_62_prime256v1, /* secp256r1 (23) */ +#ifndef OPENSSL_NO_EC2M NID_sect239k1, /* sect239k1 (8) */ NID_sect233k1, /* sect233k1 (6) */ NID_sect233r1, /* sect233r1 (7) */ +#endif NID_secp224k1, /* secp224k1 (20) */ NID_secp224r1, /* secp224r1 (21) */ +#ifndef OPENSSL_NO_EC2M NID_sect193r1, /* sect193r1 (4) */ NID_sect193r2, /* sect193r2 (5) */ +#endif NID_secp192k1, /* secp192k1 (18) */ NID_X9_62_prime192v1, /* secp192r1 (19) */ +#ifndef OPENSSL_NO_EC2M NID_sect163k1, /* sect163k1 (1) */ NID_sect163r1, /* sect163r1 (2) */ NID_sect163r2, /* sect163r2 (3) */ +#endif NID_secp160k1, /* secp160k1 (15) */ NID_secp160r1, /* secp160r1 (16) */ NID_secp160r2, /* secp160r2 (17) */ @@ -233,7 +245,7 @@ static int pref_list[] = int tls1_ec_curve_id2nid(int curve_id) { - /* ECC curves from draft-ietf-tls-ecc-12.txt (Oct. 17, 2005) */ + /* ECC curves from RFC 4492 */ if ((curve_id < 1) || ((unsigned int)curve_id > sizeof(nid_list)/sizeof(nid_list[0]))) return 0; @@ -242,7 +254,7 @@ int tls1_ec_curve_id2nid(int curve_id) int tls1_ec_nid2curve_id(int nid) { - /* ECC curves from draft-ietf-tls-ecc-12.txt (Oct. 17, 2005) */ + /* ECC curves from RFC 4492 */ switch (nid) { case NID_sect163k1: /* sect163k1 (1) */ @@ -488,11 +500,6 @@ unsigned char *ssl_add_clienthello_tlsext(SSL *s, unsigned char *buf, unsigned c s2n(TLSEXT_TYPE_elliptic_curves,ret); s2n(s->tlsext_ellipticcurvelist_length + 2, ret); - /* NB: draft-ietf-tls-ecc-12.txt uses a one-byte prefix for - * elliptic_curve_list, but the examples use two bytes. - * http://www1.ietf.org/mail-archive/web/tls/current/msg00538.html - * resolves this to two bytes. - */ s2n(s->tlsext_ellipticcurvelist_length, ret); memcpy(ret, s->tlsext_ellipticcurvelist, s->tlsext_ellipticcurvelist_length); ret+=s->tlsext_ellipticcurvelist_length; @@ -998,6 +1005,16 @@ int ssl_parse_clienthello_tlsext(SSL *s, unsigned char **p, unsigned char *d, in ssl_check_for_safari(s, data, d, n); #endif /* !OPENSSL_NO_EC */ +#ifndef OPENSSL_NO_SRP + if (s->srp_ctx.login != NULL) + { + OPENSSL_free(s->srp_ctx.login); + s->srp_ctx.login = NULL; + } +#endif + + s->srtp_profile = NULL; + if (data >= (d+n-2)) goto ri_check; n2s(data,len); @@ -1192,7 +1209,9 @@ int ssl_parse_clienthello_tlsext(SSL *s, unsigned char **p, unsigned char *d, in ellipticcurvelist_length += (*(sdata++)); if (ellipticcurvelist_length != size - 2 || - ellipticcurvelist_length < 1) + ellipticcurvelist_length < 1 || + /* Each NamedCurve is 2 bytes. */ + ellipticcurvelist_length & 1) { *al = TLS1_AD_DECODE_ERROR; return 0; @@ -1506,6 +1525,7 @@ int ssl_parse_serverhello_tlsext(SSL *s, unsigned char **p, unsigned char *d, in #ifndef OPENSSL_NO_NEXTPROTONEG s->s3->next_proto_neg_seen = 0; #endif + s->tlsext_ticket_expected = 0; #ifndef OPENSSL_NO_HEARTBEATS s->tlsext_heartbeat &= ~(SSL_TLSEXT_HB_ENABLED | @@ -1800,7 +1820,7 @@ int ssl_prepare_clienthello_tlsext(SSL *s) s->tlsext_ecpointformatlist[1] = TLSEXT_ECPOINTFORMAT_ansiX962_compressed_prime; s->tlsext_ecpointformatlist[2] = TLSEXT_ECPOINTFORMAT_ansiX962_compressed_char2; - /* we support all named elliptic curves in draft-ietf-tls-ecc-12 */ + /* we support all named elliptic curves in RFC 4492 */ if (s->tlsext_ellipticcurvelist != NULL) OPENSSL_free(s->tlsext_ellipticcurvelist); s->tlsext_ellipticcurvelist_length = sizeof(pref_list)/sizeof(pref_list[0]) * 2; if ((s->tlsext_ellipticcurvelist = OPENSSL_malloc(s->tlsext_ellipticcurvelist_length)) == NULL) diff --git a/openssl/util/libeay.num b/openssl/util/libeay.num index aa86b2b8b..3821c9c99 100644 --- a/openssl/util/libeay.num +++ b/openssl/util/libeay.num @@ -1807,6 +1807,7 @@ ASN1_UTCTIME_get 2350 NOEXIST::FUNCTION: X509_REQ_digest 2362 EXIST::FUNCTION:EVP X509_CRL_digest 2391 EXIST::FUNCTION:EVP d2i_ASN1_SET_OF_PKCS7 2397 NOEXIST::FUNCTION: +X509_ALGOR_cmp 2398 EXIST::FUNCTION: EVP_CIPHER_CTX_set_key_length 2399 EXIST::FUNCTION: EVP_CIPHER_CTX_ctrl 2400 EXIST::FUNCTION: BN_mod_exp_mont_word 2401 EXIST::FUNCTION: diff --git a/openssl/util/mk1mf.pl b/openssl/util/mk1mf.pl index f5066c045..fa45a6ead 100644 --- a/openssl/util/mk1mf.pl +++ b/openssl/util/mk1mf.pl @@ -752,12 +752,6 @@ foreach (values %lib_nam) $lib_obj=$lib_obj{$_}; local($slib)=$shlib; - if (($_ eq "SSL") && $no_ssl2 && $no_ssl3) - { - $rules.="\$(O_SSL):\n\n"; - next; - } - $defs.=&do_defs(${_}."OBJ",$lib_obj,"\$(OBJ_D)",$obj); $lib=($slib)?" \$(SHLIB_CFLAGS)".$shlib_ex_cflags{$_}:" \$(LIB_CFLAGS)"; $rules.=&do_compile_rule("\$(OBJ_D)",$lib_obj{$_},$lib); @@ -1158,12 +1152,17 @@ sub do_copy_rule return($ret); } +# Options picked up from the OPTIONS line in the top level Makefile +# generated by Configure. + sub read_options { # Many options are handled in a similar way. In particular # no-xxx sets zero or more scalars to 1. - # Process these using a hash containing the option name and - # reference to the scalars to set. + # Process these using the %valid_options hash containing the option + # name and reference to the scalars to set. In some cases the option + # needs no special handling and can be ignored: this is done by + # setting the value to 0. my %valid_options = ( "no-rc2" => \$no_rc2, @@ -1197,6 +1196,7 @@ sub read_options "gaswin" => \$gaswin, "no-ssl2" => \$no_ssl2, "no-ssl3" => \$no_ssl3, + "no-ssl3-method" => 0, "no-tlsext" => \$no_tlsext, "no-srp" => \$no_srp, "no-cms" => \$no_cms, diff --git a/openssl/util/mkbuildinf.pl b/openssl/util/mkbuildinf.pl new file mode 100644 index 000000000..9d7b81c76 --- /dev/null +++ b/openssl/util/mkbuildinf.pl @@ -0,0 +1,35 @@ +#!/usr/local/bin/perl + +my ($cflags, $platform) = @ARGV; + +$cflags = "compiler: $cflags"; +$date = localtime(); +print <<"END_OUTPUT"; +#ifndef MK1MF_BUILD + /* auto-generated by util/mkbuildinf.pl for crypto/cversion.c */ + #define CFLAGS + /* + * Generate CFLAGS as an array of individual characters. This is a + * workaround for the situation where CFLAGS gets too long for a C90 string + * literal + */ + static const char cflags[] = { +END_OUTPUT +my $ctr = 0; +foreach my $c (split //, $cflags) { + # Max 18 characters per line + if (($ctr++ % 18) == 0) { + if ($ctr != 1) { + print "\n"; + } + print " "; + } + print "'$c',"; +} +print <<"END_OUTPUT"; +'\\0' + }; + #define PLATFORM "platform: $platform" + #define DATE "built on: $date" +#endif +END_OUTPUT diff --git a/openssl/util/mkdef.pl b/openssl/util/mkdef.pl index 1eaa7b8ac..894f0529f 100644 --- a/openssl/util/mkdef.pl +++ b/openssl/util/mkdef.pl @@ -107,6 +107,8 @@ my @known_algorithms = ( "RC2", "RC4", "RC5", "IDEA", "DES", "BF", "CAPIENG", # SSL v2 "SSL2", + # SSL v3 method + "SSL3_METHOD", # JPAKE "JPAKE", # NEXTPROTONEG @@ -141,7 +143,7 @@ my $no_fp_api; my $no_static_engine=1; my $no_gmp; my $no_deprecated; my $no_rfc3779; my $no_psk; my $no_tlsext; my $no_cms; my $no_capieng; my $no_jpake; my $no_srp; my $no_ssl2; my $no_ec2m; my $no_nistp_gcc; my $no_nextprotoneg; my $no_sctp; my $no_srtp; -my $no_unit_test; +my $no_unit_test; my $no_ssl3_method; my $fips; @@ -236,6 +238,7 @@ foreach (@ARGV, split(/ /, $options)) elsif (/^no-ec_nistp_64_gcc_128$/) { $no_nistp_gcc=1; } elsif (/^no-nextprotoneg$/) { $no_nextprotoneg=1; } elsif (/^no-ssl2$/) { $no_ssl2=1; } + elsif (/^no-ssl3-method$/) { $no_ssl3_method=1; } elsif (/^no-capieng$/) { $no_capieng=1; } elsif (/^no-jpake$/) { $no_jpake=1; } elsif (/^no-srp$/) { $no_srp=1; } @@ -1208,6 +1211,7 @@ sub is_valid if ($keyword eq "EC_NISTP_64_GCC_128" && $no_nistp_gcc) { return 0; } if ($keyword eq "SSL2" && $no_ssl2) { return 0; } + if ($keyword eq "SSL3_METHOD" && $no_ssl3_method) { return 0; } if ($keyword eq "CAPIENG" && $no_capieng) { return 0; } if ($keyword eq "JPAKE" && $no_jpake) { return 0; } if ($keyword eq "SRP" && $no_srp) { return 0; } diff --git a/openssl/util/pl/netware.pl b/openssl/util/pl/netware.pl index c78bcfc87..fe80a9bb8 100644 --- a/openssl/util/pl/netware.pl +++ b/openssl/util/pl/netware.pl @@ -212,7 +212,7 @@ else # Turned off the "possible" warnings ( -w nopossible ). Metrowerks # complained a lot about various stuff. May want to turn back # on for further development. - $cflags.=" -nostdinc -ir crypto -ir engines -ir apps -I$include_path \\ + $cflags.=" -nostdinc -ir crypto -ir ssl -ir engines -ir apps -I$include_path \\ -msgstyle gcc -align 4 -processor pentium -char unsigned \\ -w on -w nolargeargs -w nopossible -w nounusedarg -w nounusedexpr \\ -w noimplicitconv -relax_pointers -nosyspath -maxerrors 20"; diff --git a/openssl/util/ssleay.num b/openssl/util/ssleay.num index dd21e9577..dd1c5e882 100644 --- a/openssl/util/ssleay.num +++ b/openssl/util/ssleay.num @@ -101,9 +101,9 @@ SSLv23_server_method 112 EXIST::FUNCTION:RSA SSLv2_client_method 113 EXIST::FUNCTION:RSA,SSL2 SSLv2_method 114 EXIST::FUNCTION:RSA,SSL2 SSLv2_server_method 115 EXIST::FUNCTION:RSA,SSL2 -SSLv3_client_method 116 EXIST::FUNCTION: -SSLv3_method 117 EXIST::FUNCTION: -SSLv3_server_method 118 EXIST::FUNCTION: +SSLv3_client_method 116 EXIST::FUNCTION:SSL3_METHOD +SSLv3_method 117 EXIST::FUNCTION:SSL3_METHOD +SSLv3_server_method 118 EXIST::FUNCTION:SSL3_METHOD d2i_SSL_SESSION 119 EXIST::FUNCTION: i2d_SSL_SESSION 120 EXIST::FUNCTION: BIO_f_ssl 121 EXIST::FUNCTION:BIO |