diff options
52 files changed, 24839 insertions, 67552 deletions
diff --git a/pixman/CODING_STYLE b/pixman/CODING_STYLE new file mode 100644 index 000000000..28dcf956e --- /dev/null +++ b/pixman/CODING_STYLE @@ -0,0 +1,199 @@ +Pixman coding style.
+====================
+
+The pixman coding style is close to cairo's with one exception: braces
+go on their own line, rather than on the line of the if/while/for:
+
+ if (condition)
+ {
+ do_something();
+ do_something_else();
+ }
+
+not
+
+ if (condition) {
+ do_something();
+ do_something_else();
+ }
+
+
+
+Indentation
+===========
+
+Each new level is indented four spaces:
+
+ if (condition)
+ do_something();
+
+This may be achieved with space characters or with a combination of
+tab characters and space characters. Tab characters are interpreted as
+
+ Advance to the next column which is a multiple of 8.
+
+
+Names
+=====
+
+In all names, words are separated with underscores. Do not use
+CamelCase for any names.
+
+Macros have ALL_CAPITAL_NAMES
+
+Type names are in lower case and end with "_t". For example
+pixman_image_t.
+
+Labels, functions and variables have lower case names.
+
+
+Braces
+======
+
+Braces always go on their own line:
+
+ if (condition)
+ {
+ do_this ();
+ do_that ();
+ }
+ else
+ {
+ do_the_other ();
+ }
+
+Rules for braces and substatements of if/while/for/do:
+
+* If a substatement spans multiple lines, then there must be braces
+ around it.
+
+* If the condition of an if/while/for spans multiple lines, then
+ braces must be used for the substatements.
+
+* If one substatement of an if statement has braces, then the other
+ must too.
+
+* Otherwise, don't add braces.
+
+
+Comments
+========
+
+For comments either like this:
+
+ /* One line comment */
+
+or like this:
+
+ /* This is a multi-line comment
+ *
+ * It extends over multiple lines
+ */
+
+Generally comments should say things that aren't clear from the code
+itself. If too many comments say obvious things, then people will just
+stop reading all comments, including the good ones.
+
+
+Whitespace
+==========
+
+* Put a single space after commas
+
+* Put spaces around arithmetic operators such a +, -, *, /:
+
+ y * stride + x
+
+ x / unit_x
+
+* Do not put spaces after the address-of operator, the * when used as
+ a pointer derefernce or the ! and ~ operators:
+
+ &foo;
+
+ ~0x00000000
+
+ !condition
+
+ *result = 100
+
+* Break up long lines (> ~80 characters) and use whitespace to align
+ things nicely. This is one way:
+
+ some_very_long_function name (
+ implementation, op, src, mask, dest,
+ src_x, src_y, mask_x, mask_y, dest_x, dest_y,
+ width, height);
+
+ This is another:
+
+ some_very_long_function_name (implementation, op,
+ src, mask, dest,
+ src_x, src_y,
+ mask_x, mask_y,
+ dest_x, dest_y,
+ width, height);
+
+* Separate logically distinct chunks with a single newline. This
+ obviously applies between functions, but also applies within a
+ function or block or structure definition.
+
+* Use a newline after a block of variable declarations.
+
+* Use a single space before a left parenthesis, except where the
+ standard will not allow it, (eg. when defining a parameterized macro).
+
+* Don't eliminate newlines just because things would still fit on one
+ line. This breaks the expected visual structure of the code making
+ it much harder to read and understand:
+
+ if (condition) foo (); else bar (); /* Yuck! */
+
+
+Function Definitions
+====================
+
+Function definitions should take the following form:
+
+ void
+ my_function (int argument)
+ {
+ do_my_things ();
+ }
+
+If all the parameters to a function fit naturally on one line, format
+them that way. Otherwise, put one argument on each line, adding
+whitespace so that the parameter names are aligned with each other.
+
+I.e., do either this:
+
+ void
+ short_arguments (const char *str, int x, int y, int z)
+ {
+ }
+
+or this:
+
+ void
+ long_arguments (const char *char_star_arg,
+ int int_arg,
+ double *double_star_arg,
+ double double_arg)
+ {
+ }
+
+
+Mode lines
+==========
+
+Given the rules above, what is the best way to simplify one's life as
+a code monkey? Get your editor to do most of the tedious work of
+beautifying your code!
+
+As a reward for reading this far, here are some mode lines for the more
+popular editors:
+/*
+ * vim:sw=4:sts=4:ts=8:tw=78:fo=tcroq:cindent:cino=\:0,(0
+ * vim:isk=a-z,A-Z,48-57,_,.,-,>
+ */
+
diff --git a/pixman/Makefile.in b/pixman/Makefile.in deleted file mode 100644 index 41fe19b57..000000000 --- a/pixman/Makefile.in +++ /dev/null @@ -1,920 +0,0 @@ -# Makefile.in generated by automake 1.11.1 from Makefile.am. -# @configure_input@ - -# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, -# 2003, 2004, 2005, 2006, 2007, 2008, 2009 Free Software Foundation, -# Inc. -# This Makefile.in is free software; the Free Software Foundation -# gives unlimited permission to copy and/or distribute it, -# with or without modifications, as long as this notice is preserved. - -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY, to the extent permitted by law; without -# even the implied warranty of MERCHANTABILITY or FITNESS FOR A -# PARTICULAR PURPOSE. - -@SET_MAKE@ - -VPATH = @srcdir@ -pkgdatadir = $(datadir)/@PACKAGE@ -pkgincludedir = $(includedir)/@PACKAGE@ -pkglibdir = $(libdir)/@PACKAGE@ -pkglibexecdir = $(libexecdir)/@PACKAGE@ -am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd -install_sh_DATA = $(install_sh) -c -m 644 -install_sh_PROGRAM = $(install_sh) -c -install_sh_SCRIPT = $(install_sh) -c -INSTALL_HEADER = $(INSTALL_DATA) -transform = $(program_transform_name) -NORMAL_INSTALL = : -PRE_INSTALL = : -POST_INSTALL = : -NORMAL_UNINSTALL = : -PRE_UNINSTALL = : -POST_UNINSTALL = : -build_triplet = @build@ -host_triplet = @host@ -subdir = . -DIST_COMMON = README $(am__configure_deps) $(srcdir)/Makefile.am \ - $(srcdir)/Makefile.in $(srcdir)/config.h.in \ - $(srcdir)/pixman-1-uninstalled.pc.in $(srcdir)/pixman-1.pc.in \ - $(top_srcdir)/configure AUTHORS COPYING ChangeLog INSTALL NEWS \ - TODO config.guess config.sub depcomp install-sh ltmain.sh \ - missing -ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 -am__aclocal_m4_deps = $(top_srcdir)/configure.ac -am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ - $(ACLOCAL_M4) -am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \ - configure.lineno config.status.lineno -mkinstalldirs = $(install_sh) -d -CONFIG_HEADER = config.h -CONFIG_CLEAN_FILES = pixman-1.pc pixman-1-uninstalled.pc -CONFIG_CLEAN_VPATH_FILES = -AM_V_GEN = $(am__v_GEN_$(V)) -am__v_GEN_ = $(am__v_GEN_$(AM_DEFAULT_VERBOSITY)) -am__v_GEN_0 = @echo " GEN " $@; -AM_V_at = $(am__v_at_$(V)) -am__v_at_ = $(am__v_at_$(AM_DEFAULT_VERBOSITY)) -am__v_at_0 = @ -SOURCES = -DIST_SOURCES = -RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \ - html-recursive info-recursive install-data-recursive \ - install-dvi-recursive install-exec-recursive \ - install-html-recursive install-info-recursive \ - install-pdf-recursive install-ps-recursive install-recursive \ - installcheck-recursive installdirs-recursive pdf-recursive \ - ps-recursive uninstall-recursive -am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; -am__vpath_adj = case $$p in \ - $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \ - *) f=$$p;; \ - esac; -am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`; -am__install_max = 40 -am__nobase_strip_setup = \ - srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'` -am__nobase_strip = \ - for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||" -am__nobase_list = $(am__nobase_strip_setup); \ - for p in $$list; do echo "$$p $$p"; done | \ - sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \ - $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \ - if (++n[$$2] == $(am__install_max)) \ - { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \ - END { for (dir in files) print dir, files[dir] }' -am__base_list = \ - sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \ - sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g' -am__installdirs = "$(DESTDIR)$(pkgconfigdir)" -DATA = $(pkgconfig_DATA) -RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \ - distclean-recursive maintainer-clean-recursive -AM_RECURSIVE_TARGETS = $(RECURSIVE_TARGETS:-recursive=) \ - $(RECURSIVE_CLEAN_TARGETS:-recursive=) tags TAGS ctags CTAGS \ - distdir dist dist-all distcheck -ETAGS = etags -CTAGS = ctags -DIST_SUBDIRS = $(SUBDIRS) -DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) -distdir = $(PACKAGE)-$(VERSION) -top_distdir = $(distdir) -am__remove_distdir = \ - { test ! -d "$(distdir)" \ - || { find "$(distdir)" -type d ! -perm -200 -exec chmod u+w {} ';' \ - && rm -fr "$(distdir)"; }; } -am__relativize = \ - dir0=`pwd`; \ - sed_first='s,^\([^/]*\)/.*$$,\1,'; \ - sed_rest='s,^[^/]*/*,,'; \ - sed_last='s,^.*/\([^/]*\)$$,\1,'; \ - sed_butlast='s,/*[^/]*$$,,'; \ - while test -n "$$dir1"; do \ - first=`echo "$$dir1" | sed -e "$$sed_first"`; \ - if test "$$first" != "."; then \ - if test "$$first" = ".."; then \ - dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \ - dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \ - else \ - first2=`echo "$$dir2" | sed -e "$$sed_first"`; \ - if test "$$first2" = "$$first"; then \ - dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \ - else \ - dir2="../$$dir2"; \ - fi; \ - dir0="$$dir0"/"$$first"; \ - fi; \ - fi; \ - dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \ - done; \ - reldir="$$dir2" -DIST_ARCHIVES = $(distdir).tar.gz $(distdir).tar.bz2 -GZIP_ENV = --best -distuninstallcheck_listfiles = find . -type f -print -distcleancheck_listfiles = find . -type f -print -ACLOCAL = @ACLOCAL@ -AMTAR = @AMTAR@ -AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@ -AR = @AR@ -AUTOCONF = @AUTOCONF@ -AUTOHEADER = @AUTOHEADER@ -AUTOMAKE = @AUTOMAKE@ -AWK = @AWK@ -CC = @CC@ -CCAS = @CCAS@ -CCASDEPMODE = @CCASDEPMODE@ -CCASFLAGS = @CCASFLAGS@ -CCDEPMODE = @CCDEPMODE@ -CFLAGS = @CFLAGS@ -CPP = @CPP@ -CPPFLAGS = @CPPFLAGS@ -CYGPATH_W = @CYGPATH_W@ -DEFS = @DEFS@ -DEPDIR = @DEPDIR@ -DEP_CFLAGS = @DEP_CFLAGS@ -DEP_LIBS = @DEP_LIBS@ -DSYMUTIL = @DSYMUTIL@ -DUMPBIN = @DUMPBIN@ -ECHO_C = @ECHO_C@ -ECHO_N = @ECHO_N@ -ECHO_T = @ECHO_T@ -EGREP = @EGREP@ -EXEEXT = @EXEEXT@ -FGREP = @FGREP@ -GREP = @GREP@ -GTK_CFLAGS = @GTK_CFLAGS@ -GTK_LIBS = @GTK_LIBS@ -HAVE_PTHREAD_SETSPECIFIC = @HAVE_PTHREAD_SETSPECIFIC@ -INSTALL = @INSTALL@ -INSTALL_DATA = @INSTALL_DATA@ -INSTALL_PROGRAM = @INSTALL_PROGRAM@ -INSTALL_SCRIPT = @INSTALL_SCRIPT@ -INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ -LD = @LD@ -LDFLAGS = @LDFLAGS@ -LIBOBJS = @LIBOBJS@ -LIBS = @LIBS@ -LIBTOOL = @LIBTOOL@ -LIPO = @LIPO@ -LN_S = @LN_S@ -LTLIBOBJS = @LTLIBOBJS@ -LT_VERSION_INFO = @LT_VERSION_INFO@ -MAKEINFO = @MAKEINFO@ -MKDIR_P = @MKDIR_P@ -MMX_CFLAGS = @MMX_CFLAGS@ -MMX_LDFLAGS = @MMX_LDFLAGS@ -NM = @NM@ -NMEDIT = @NMEDIT@ -OBJDUMP = @OBJDUMP@ -OBJEXT = @OBJEXT@ -OTOOL = @OTOOL@ -OTOOL64 = @OTOOL64@ -PACKAGE = @PACKAGE@ -PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ -PACKAGE_NAME = @PACKAGE_NAME@ -PACKAGE_STRING = @PACKAGE_STRING@ -PACKAGE_TARNAME = @PACKAGE_TARNAME@ -PACKAGE_URL = @PACKAGE_URL@ -PACKAGE_VERSION = @PACKAGE_VERSION@ -PATH_SEPARATOR = @PATH_SEPARATOR@ -PERL = @PERL@ -PIXMAN_TIMERS = @PIXMAN_TIMERS@ -PIXMAN_VERSION_MAJOR = @PIXMAN_VERSION_MAJOR@ -PIXMAN_VERSION_MICRO = @PIXMAN_VERSION_MICRO@ -PIXMAN_VERSION_MINOR = @PIXMAN_VERSION_MINOR@ -PKG_CONFIG = @PKG_CONFIG@ -PTHREAD_LDFLAGS = @PTHREAD_LDFLAGS@ -RANLIB = @RANLIB@ -SED = @SED@ -SET_MAKE = @SET_MAKE@ -SHELL = @SHELL@ -SSE2_CFLAGS = @SSE2_CFLAGS@ -SSE2_LDFLAGS = @SSE2_LDFLAGS@ -STRIP = @STRIP@ -TOOLCHAIN_SUPPORTS__THREAD = @TOOLCHAIN_SUPPORTS__THREAD@ -VERSION = @VERSION@ -VMX_CFLAGS = @VMX_CFLAGS@ -abs_builddir = @abs_builddir@ -abs_srcdir = @abs_srcdir@ -abs_top_builddir = @abs_top_builddir@ -abs_top_srcdir = @abs_top_srcdir@ -ac_ct_CC = @ac_ct_CC@ -ac_ct_DUMPBIN = @ac_ct_DUMPBIN@ -am__include = @am__include@ -am__leading_dot = @am__leading_dot@ -am__quote = @am__quote@ -am__tar = @am__tar@ -am__untar = @am__untar@ -bindir = @bindir@ -build = @build@ -build_alias = @build_alias@ -build_cpu = @build_cpu@ -build_os = @build_os@ -build_vendor = @build_vendor@ -builddir = @builddir@ -datadir = @datadir@ -datarootdir = @datarootdir@ -docdir = @docdir@ -dvidir = @dvidir@ -exec_prefix = @exec_prefix@ -host = @host@ -host_alias = @host_alias@ -host_cpu = @host_cpu@ -host_os = @host_os@ -host_vendor = @host_vendor@ -htmldir = @htmldir@ -includedir = @includedir@ -infodir = @infodir@ -install_sh = @install_sh@ -libdir = @libdir@ -libexecdir = @libexecdir@ -localedir = @localedir@ -localstatedir = @localstatedir@ -lt_ECHO = @lt_ECHO@ -mandir = @mandir@ -mkdir_p = @mkdir_p@ -oldincludedir = @oldincludedir@ -pdfdir = @pdfdir@ -prefix = @prefix@ -program_transform_name = @program_transform_name@ -psdir = @psdir@ -sbindir = @sbindir@ -sharedstatedir = @sharedstatedir@ -srcdir = @srcdir@ -sysconfdir = @sysconfdir@ -target_alias = @target_alias@ -top_build_prefix = @top_build_prefix@ -top_builddir = @top_builddir@ -top_srcdir = @top_srcdir@ -SUBDIRS = pixman test -pkgconfigdir = $(libdir)/pkgconfig -pkgconfig_DATA = pixman-1.pc -GPGKEY = 6FF7C1A8 -USERNAME = $$USER -RELEASE_OR_SNAPSHOT = $$(if test "x$(CAIRO_VERSION_MINOR)" = "x$$(echo "$(CAIRO_VERSION_MINOR)/2*2" | bc)" ; then echo release; else echo snapshot; fi) -RELEASE_CAIRO_HOST = $(USERNAME)@cairographics.org -RELEASE_CAIRO_DIR = /srv/cairo.freedesktop.org/www/releases -RELEASE_CAIRO_URL = http://cairographics.org/releases -RELEASE_XORG_URL = http://xorg.freedesktop.org/archive/individual/lib -RELEASE_XORG_HOST = $(USERNAME)@xorg.freedesktop.org -RELEASE_XORG_DIR = /srv/xorg.freedesktop.org/archive/individual/lib -RELEASE_ANNOUNCE_LIST = cairo-announce@cairographics.org, xorg-announce@lists.freedesktop.org -tar_gz = $(PACKAGE)-$(VERSION).tar.gz -tar_bz2 = $(PACKAGE)-$(VERSION).tar.bz2 -sha1_tgz = $(tar_gz).sha1 -md5_tgz = $(tar_gz).md5 -sha1_tbz2 = $(tar_bz2).sha1 -md5_tbz2 = $(tar_bz2).md5 -gpg_file = $(sha1_tgz).asc -HASHFILES = $(sha1_tgz) $(sha1_tbz2) $(md5_tgz) $(md5_tbz2) -all: config.h - $(MAKE) $(AM_MAKEFLAGS) all-recursive - -.SUFFIXES: -am--refresh: - @: -$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps) - @for dep in $?; do \ - case '$(am__configure_deps)' in \ - *$$dep*) \ - echo ' cd $(srcdir) && $(AUTOMAKE) --foreign'; \ - $(am__cd) $(srcdir) && $(AUTOMAKE) --foreign \ - && exit 0; \ - exit 1;; \ - esac; \ - done; \ - echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign Makefile'; \ - $(am__cd) $(top_srcdir) && \ - $(AUTOMAKE) --foreign Makefile -.PRECIOUS: Makefile -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status - @case '$?' in \ - *config.status*) \ - echo ' $(SHELL) ./config.status'; \ - $(SHELL) ./config.status;; \ - *) \ - echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe)'; \ - cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe);; \ - esac; - -$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) - $(SHELL) ./config.status --recheck - -$(top_srcdir)/configure: $(am__configure_deps) - $(am__cd) $(srcdir) && $(AUTOCONF) -$(ACLOCAL_M4): $(am__aclocal_m4_deps) - $(am__cd) $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS) -$(am__aclocal_m4_deps): - -config.h: stamp-h1 - @if test ! -f $@; then \ - rm -f stamp-h1; \ - $(MAKE) $(AM_MAKEFLAGS) stamp-h1; \ - else :; fi - -stamp-h1: $(srcdir)/config.h.in $(top_builddir)/config.status - @rm -f stamp-h1 - cd $(top_builddir) && $(SHELL) ./config.status config.h -$(srcdir)/config.h.in: $(am__configure_deps) - ($(am__cd) $(top_srcdir) && $(AUTOHEADER)) - rm -f stamp-h1 - touch $@ - -distclean-hdr: - -rm -f config.h stamp-h1 -pixman-1.pc: $(top_builddir)/config.status $(srcdir)/pixman-1.pc.in - cd $(top_builddir) && $(SHELL) ./config.status $@ -pixman-1-uninstalled.pc: $(top_builddir)/config.status $(srcdir)/pixman-1-uninstalled.pc.in - cd $(top_builddir) && $(SHELL) ./config.status $@ - -mostlyclean-libtool: - -rm -f *.lo - -clean-libtool: - -rm -rf .libs _libs - -distclean-libtool: - -rm -f libtool config.lt -install-pkgconfigDATA: $(pkgconfig_DATA) - @$(NORMAL_INSTALL) - test -z "$(pkgconfigdir)" || $(MKDIR_P) "$(DESTDIR)$(pkgconfigdir)" - @list='$(pkgconfig_DATA)'; test -n "$(pkgconfigdir)" || list=; \ - for p in $$list; do \ - if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ - echo "$$d$$p"; \ - done | $(am__base_list) | \ - while read files; do \ - echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(pkgconfigdir)'"; \ - $(INSTALL_DATA) $$files "$(DESTDIR)$(pkgconfigdir)" || exit $$?; \ - done - -uninstall-pkgconfigDATA: - @$(NORMAL_UNINSTALL) - @list='$(pkgconfig_DATA)'; test -n "$(pkgconfigdir)" || list=; \ - files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \ - test -n "$$files" || exit 0; \ - echo " ( cd '$(DESTDIR)$(pkgconfigdir)' && rm -f" $$files ")"; \ - cd "$(DESTDIR)$(pkgconfigdir)" && rm -f $$files - -# This directory's subdirectories are mostly independent; you can cd -# into them and run `make' without going through this Makefile. -# To change the values of `make' variables: instead of editing Makefiles, -# (1) if the variable is set in `config.status', edit `config.status' -# (which will cause the Makefiles to be regenerated when you run `make'); -# (2) otherwise, pass the desired values on the `make' command line. -$(RECURSIVE_TARGETS): - @fail= failcom='exit 1'; \ - for f in x $$MAKEFLAGS; do \ - case $$f in \ - *=* | --[!k]*);; \ - *k*) failcom='fail=yes';; \ - esac; \ - done; \ - dot_seen=no; \ - target=`echo $@ | sed s/-recursive//`; \ - list='$(SUBDIRS)'; for subdir in $$list; do \ - echo "Making $$target in $$subdir"; \ - if test "$$subdir" = "."; then \ - dot_seen=yes; \ - local_target="$$target-am"; \ - else \ - local_target="$$target"; \ - fi; \ - ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ - || eval $$failcom; \ - done; \ - if test "$$dot_seen" = "no"; then \ - $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \ - fi; test -z "$$fail" - -$(RECURSIVE_CLEAN_TARGETS): - @fail= failcom='exit 1'; \ - for f in x $$MAKEFLAGS; do \ - case $$f in \ - *=* | --[!k]*);; \ - *k*) failcom='fail=yes';; \ - esac; \ - done; \ - dot_seen=no; \ - case "$@" in \ - distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \ - *) list='$(SUBDIRS)' ;; \ - esac; \ - rev=''; for subdir in $$list; do \ - if test "$$subdir" = "."; then :; else \ - rev="$$subdir $$rev"; \ - fi; \ - done; \ - rev="$$rev ."; \ - target=`echo $@ | sed s/-recursive//`; \ - for subdir in $$rev; do \ - echo "Making $$target in $$subdir"; \ - if test "$$subdir" = "."; then \ - local_target="$$target-am"; \ - else \ - local_target="$$target"; \ - fi; \ - ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ - || eval $$failcom; \ - done && test -z "$$fail" -tags-recursive: - list='$(SUBDIRS)'; for subdir in $$list; do \ - test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \ - done -ctags-recursive: - list='$(SUBDIRS)'; for subdir in $$list; do \ - test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \ - done - -ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES) - list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ - unique=`for i in $$list; do \ - if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ - done | \ - $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ - END { if (nonempty) { for (i in files) print i; }; }'`; \ - mkid -fID $$unique -tags: TAGS - -TAGS: tags-recursive $(HEADERS) $(SOURCES) config.h.in $(TAGS_DEPENDENCIES) \ - $(TAGS_FILES) $(LISP) - set x; \ - here=`pwd`; \ - if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \ - include_option=--etags-include; \ - empty_fix=.; \ - else \ - include_option=--include; \ - empty_fix=; \ - fi; \ - list='$(SUBDIRS)'; for subdir in $$list; do \ - if test "$$subdir" = .; then :; else \ - test ! -f $$subdir/TAGS || \ - set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \ - fi; \ - done; \ - list='$(SOURCES) $(HEADERS) config.h.in $(LISP) $(TAGS_FILES)'; \ - unique=`for i in $$list; do \ - if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ - done | \ - $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ - END { if (nonempty) { for (i in files) print i; }; }'`; \ - shift; \ - if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \ - test -n "$$unique" || unique=$$empty_fix; \ - if test $$# -gt 0; then \ - $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ - "$$@" $$unique; \ - else \ - $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ - $$unique; \ - fi; \ - fi -ctags: CTAGS -CTAGS: ctags-recursive $(HEADERS) $(SOURCES) config.h.in $(TAGS_DEPENDENCIES) \ - $(TAGS_FILES) $(LISP) - list='$(SOURCES) $(HEADERS) config.h.in $(LISP) $(TAGS_FILES)'; \ - unique=`for i in $$list; do \ - if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ - done | \ - $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ - END { if (nonempty) { for (i in files) print i; }; }'`; \ - test -z "$(CTAGS_ARGS)$$unique" \ - || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \ - $$unique - -GTAGS: - here=`$(am__cd) $(top_builddir) && pwd` \ - && $(am__cd) $(top_srcdir) \ - && gtags -i $(GTAGS_ARGS) "$$here" - -distclean-tags: - -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags - -distdir: $(DISTFILES) - $(am__remove_distdir) - test -d "$(distdir)" || mkdir "$(distdir)" - @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ - topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ - list='$(DISTFILES)'; \ - dist_files=`for file in $$list; do echo $$file; done | \ - sed -e "s|^$$srcdirstrip/||;t" \ - -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ - case $$dist_files in \ - */*) $(MKDIR_P) `echo "$$dist_files" | \ - sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ - sort -u` ;; \ - esac; \ - for file in $$dist_files; do \ - if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ - if test -d $$d/$$file; then \ - dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ - if test -d "$(distdir)/$$file"; then \ - find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ - fi; \ - if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ - cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \ - find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ - fi; \ - cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \ - else \ - test -f "$(distdir)/$$file" \ - || cp -p $$d/$$file "$(distdir)/$$file" \ - || exit 1; \ - fi; \ - done - @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \ - if test "$$subdir" = .; then :; else \ - test -d "$(distdir)/$$subdir" \ - || $(MKDIR_P) "$(distdir)/$$subdir" \ - || exit 1; \ - fi; \ - done - @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \ - if test "$$subdir" = .; then :; else \ - dir1=$$subdir; dir2="$(distdir)/$$subdir"; \ - $(am__relativize); \ - new_distdir=$$reldir; \ - dir1=$$subdir; dir2="$(top_distdir)"; \ - $(am__relativize); \ - new_top_distdir=$$reldir; \ - echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \ - echo " am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \ - ($(am__cd) $$subdir && \ - $(MAKE) $(AM_MAKEFLAGS) \ - top_distdir="$$new_top_distdir" \ - distdir="$$new_distdir" \ - am__remove_distdir=: \ - am__skip_length_check=: \ - am__skip_mode_fix=: \ - distdir) \ - || exit 1; \ - fi; \ - done - -test -n "$(am__skip_mode_fix)" \ - || find "$(distdir)" -type d ! -perm -755 \ - -exec chmod u+rwx,go+rx {} \; -o \ - ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \ - ! -type d ! -perm -400 -exec chmod a+r {} \; -o \ - ! -type d ! -perm -444 -exec $(install_sh) -c -m a+r {} {} \; \ - || chmod -R a+r "$(distdir)" -dist-gzip: distdir - tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz - $(am__remove_distdir) -dist-bzip2: distdir - tardir=$(distdir) && $(am__tar) | bzip2 -9 -c >$(distdir).tar.bz2 - $(am__remove_distdir) - -dist-lzma: distdir - tardir=$(distdir) && $(am__tar) | lzma -9 -c >$(distdir).tar.lzma - $(am__remove_distdir) - -dist-xz: distdir - tardir=$(distdir) && $(am__tar) | xz -c >$(distdir).tar.xz - $(am__remove_distdir) - -dist-tarZ: distdir - tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z - $(am__remove_distdir) - -dist-shar: distdir - shar $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).shar.gz - $(am__remove_distdir) - -dist-zip: distdir - -rm -f $(distdir).zip - zip -rq $(distdir).zip $(distdir) - $(am__remove_distdir) - -dist dist-all: distdir - tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz - tardir=$(distdir) && $(am__tar) | bzip2 -9 -c >$(distdir).tar.bz2 - $(am__remove_distdir) - -# This target untars the dist file and tries a VPATH configuration. Then -# it guarantees that the distribution is self-contained by making another -# tarfile. -distcheck: dist - case '$(DIST_ARCHIVES)' in \ - *.tar.gz*) \ - GZIP=$(GZIP_ENV) gzip -dc $(distdir).tar.gz | $(am__untar) ;;\ - *.tar.bz2*) \ - bzip2 -dc $(distdir).tar.bz2 | $(am__untar) ;;\ - *.tar.lzma*) \ - lzma -dc $(distdir).tar.lzma | $(am__untar) ;;\ - *.tar.xz*) \ - xz -dc $(distdir).tar.xz | $(am__untar) ;;\ - *.tar.Z*) \ - uncompress -c $(distdir).tar.Z | $(am__untar) ;;\ - *.shar.gz*) \ - GZIP=$(GZIP_ENV) gzip -dc $(distdir).shar.gz | unshar ;;\ - *.zip*) \ - unzip $(distdir).zip ;;\ - esac - chmod -R a-w $(distdir); chmod a+w $(distdir) - mkdir $(distdir)/_build - mkdir $(distdir)/_inst - chmod a-w $(distdir) - test -d $(distdir)/_build || exit 0; \ - dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \ - && dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \ - && am__cwd=`pwd` \ - && $(am__cd) $(distdir)/_build \ - && ../configure --srcdir=.. --prefix="$$dc_install_base" \ - $(DISTCHECK_CONFIGURE_FLAGS) \ - && $(MAKE) $(AM_MAKEFLAGS) \ - && $(MAKE) $(AM_MAKEFLAGS) dvi \ - && $(MAKE) $(AM_MAKEFLAGS) check \ - && $(MAKE) $(AM_MAKEFLAGS) install \ - && $(MAKE) $(AM_MAKEFLAGS) installcheck \ - && $(MAKE) $(AM_MAKEFLAGS) uninstall \ - && $(MAKE) $(AM_MAKEFLAGS) distuninstallcheck_dir="$$dc_install_base" \ - distuninstallcheck \ - && chmod -R a-w "$$dc_install_base" \ - && ({ \ - (cd ../.. && umask 077 && mkdir "$$dc_destdir") \ - && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" install \ - && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" uninstall \ - && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" \ - distuninstallcheck_dir="$$dc_destdir" distuninstallcheck; \ - } || { rm -rf "$$dc_destdir"; exit 1; }) \ - && rm -rf "$$dc_destdir" \ - && $(MAKE) $(AM_MAKEFLAGS) dist \ - && rm -rf $(DIST_ARCHIVES) \ - && $(MAKE) $(AM_MAKEFLAGS) distcleancheck \ - && cd "$$am__cwd" \ - || exit 1 - $(am__remove_distdir) - @(echo "$(distdir) archives ready for distribution: "; \ - list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \ - sed -e 1h -e 1s/./=/g -e 1p -e 1x -e '$$p' -e '$$x' -distuninstallcheck: - @$(am__cd) '$(distuninstallcheck_dir)' \ - && test `$(distuninstallcheck_listfiles) | wc -l` -le 1 \ - || { echo "ERROR: files left after uninstall:" ; \ - if test -n "$(DESTDIR)"; then \ - echo " (check DESTDIR support)"; \ - fi ; \ - $(distuninstallcheck_listfiles) ; \ - exit 1; } >&2 -distcleancheck: distclean - @if test '$(srcdir)' = . ; then \ - echo "ERROR: distcleancheck can only run from a VPATH build" ; \ - exit 1 ; \ - fi - @test `$(distcleancheck_listfiles) | wc -l` -eq 0 \ - || { echo "ERROR: files left in build directory after distclean:" ; \ - $(distcleancheck_listfiles) ; \ - exit 1; } >&2 -check-am: all-am -check: check-recursive -all-am: Makefile $(DATA) config.h -installdirs: installdirs-recursive -installdirs-am: - for dir in "$(DESTDIR)$(pkgconfigdir)"; do \ - test -z "$$dir" || $(MKDIR_P) "$$dir"; \ - done -install: install-recursive -install-exec: install-exec-recursive -install-data: install-data-recursive -uninstall: uninstall-recursive - -install-am: all-am - @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am - -installcheck: installcheck-recursive -install-strip: - $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ - install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ - `test -z '$(STRIP)' || \ - echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install -mostlyclean-generic: - -clean-generic: - -distclean-generic: - -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) - -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES) - -maintainer-clean-generic: - @echo "This command is intended for maintainers to use" - @echo "it deletes files that may require special tools to rebuild." -clean: clean-recursive - -clean-am: clean-generic clean-libtool mostlyclean-am - -distclean: distclean-recursive - -rm -f $(am__CONFIG_DISTCLEAN_FILES) - -rm -f Makefile -distclean-am: clean-am distclean-generic distclean-hdr \ - distclean-libtool distclean-tags - -dvi: dvi-recursive - -dvi-am: - -html: html-recursive - -html-am: - -info: info-recursive - -info-am: - -install-data-am: install-pkgconfigDATA - -install-dvi: install-dvi-recursive - -install-dvi-am: - -install-exec-am: - -install-html: install-html-recursive - -install-html-am: - -install-info: install-info-recursive - -install-info-am: - -install-man: - -install-pdf: install-pdf-recursive - -install-pdf-am: - -install-ps: install-ps-recursive - -install-ps-am: - -installcheck-am: - -maintainer-clean: maintainer-clean-recursive - -rm -f $(am__CONFIG_DISTCLEAN_FILES) - -rm -rf $(top_srcdir)/autom4te.cache - -rm -f Makefile -maintainer-clean-am: distclean-am maintainer-clean-generic - -mostlyclean: mostlyclean-recursive - -mostlyclean-am: mostlyclean-generic mostlyclean-libtool - -pdf: pdf-recursive - -pdf-am: - -ps: ps-recursive - -ps-am: - -uninstall-am: uninstall-pkgconfigDATA - -.MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) all \ - ctags-recursive install-am install-strip tags-recursive - -.PHONY: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) CTAGS GTAGS \ - all all-am am--refresh check check-am clean clean-generic \ - clean-libtool ctags ctags-recursive dist dist-all dist-bzip2 \ - dist-gzip dist-lzma dist-shar dist-tarZ dist-xz dist-zip \ - distcheck distclean distclean-generic distclean-hdr \ - distclean-libtool distclean-tags distcleancheck distdir \ - distuninstallcheck dvi dvi-am html html-am info info-am \ - install install-am install-data install-data-am install-dvi \ - install-dvi-am install-exec install-exec-am install-html \ - install-html-am install-info install-info-am install-man \ - install-pdf install-pdf-am install-pkgconfigDATA install-ps \ - install-ps-am install-strip installcheck installcheck-am \ - installdirs installdirs-am maintainer-clean \ - maintainer-clean-generic mostlyclean mostlyclean-generic \ - mostlyclean-libtool pdf pdf-am ps ps-am tags tags-recursive \ - uninstall uninstall-am uninstall-pkgconfigDATA - - -$(pkgconfig_DATA): pixman-1.pc.in - -snapshot: - distdir="$(distdir)-`date '+%Y%m%d'`"; \ - test -d "$(srcdir)/.git" && distdir=$$distdir-`cd "$(srcdir)" && git rev-parse HEAD | cut -c 1-6`; \ - $(MAKE) $(AM_MAKEFLAGS) distdir="$$distdir" dist - -$(sha1_tgz): $(tar_gz) - sha1sum $^ > $@ - -$(md5_tgz): $(tar_gz) - md5sum $^ > $@ - -$(sha1_tbz2): $(tar_bz2) - sha1sum $^ > $@ - -$(md5_tbz2): $(tar_bz2) - md5sum $^ > $@ - -$(gpg_file): $(sha1_tgz) - @echo "Please enter your GPG password to sign the checksum." - gpg --armor --sign $^ - -release-verify-newer: - @echo -n "Checking that no $(VERSION) release already exists at $(RELEASE_XORG_HOST)..." - @ssh $(RELEASE_XORG_HOST) test ! -e $(RELEASE_XORG_DIR)/$(tar_gz) \ - || (echo "Ouch." && echo "Found: $(RELEASE_XORG_HOST):$(RELEASE_XORG_DIR)/$(tar_gz)" \ - && echo "Refusing to try to generate a new release of the same name." \ - && false) - @ssh $(RELEASE_CAIRO_HOST) test ! -e $(RELEASE_CAIRO_DIR)/$(tar_gz) \ - || (echo "Ouch." && echo "Found: $(RELEASE_CAIRO_HOST):$(RELEASE_CAIRO_DIR)/$(tar_gz)" \ - && echo "Refusing to try to generate a new release of the same name." \ - && false) - @echo "Good." - -release-remove-old: - $(RM) $(tar_gz) $(tar_bz2) $(HASHFILES) $(gpg_file) - -ensure-prev: - @if [[ "$(PREV)" == "" ]]; then \ - echo "" && \ - echo "You must set the PREV variable on the make command line to" && \ - echo "the last version." && \ - echo "" && \ - echo "For example:" && \ - echo " make PREV=0.7.3" && \ - echo "" && \ - false; \ - fi - -release-check: ensure-prev release-verify-newer release-remove-old distcheck - -release-tag: - git tag -u $(GPGKEY) -m "$(PACKAGE) $(VERSION) release" $(PACKAGE)-$(VERSION) - -release-upload: release-check $(tar_gz) $(tar_bz2) $(sha1_tgz) $(sha1_tbz2) $(md5_tgz) $(gpg_file) - mkdir -p releases - scp $(tar_gz) $(sha1_tgz) $(gpg_file) $(RELEASE_CAIRO_HOST):$(RELEASE_CAIRO_DIR) - scp $(tar_gz) $(tar_bz2) $(RELEASE_XORG_HOST):$(RELEASE_XORG_DIR) - ssh $(RELEASE_CAIRO_HOST) "rm -f $(RELEASE_CAIRO_DIR)/LATEST-$(PACKAGE)-[0-9]* && ln -s $(tar_gz) $(RELEASE_CAIRO_DIR)/LATEST-$(PACKAGE)-$(VERSION)" - -release-publish-message: $(HASHFILES) ensure-prev - @echo "Please follow the instructions in RELEASING to push stuff out and" - @echo "send out the announcement mails. Here is the excerpt you need:" - @echo "" - @echo "Lists: $(RELEASE_ANNOUNCE_LIST)" - @echo "Subject: [ANNOUNCE] $(PACKAGE) release $(VERSION) now available" - @echo "============================== CUT HERE ==============================" - @echo "A new $(PACKAGE) release $(VERSION) is now available" - @echo "" - @echo "tar.gz:" - @echo " $(RELEASE_CAIRO_URL)/$(tar_gz)" - @echo " $(RELEASE_XORG_URL)/$(tar_gz)" - @echo "" - @echo "tar.bz2:" - @echo " $(RELEASE_XORG_URL)/$(tar_bz2)" - @echo "" - @echo "Hashes:" - @echo -n " MD5: " - @cat $(md5_tgz) - @echo -n " MD5: " - @cat $(md5_tbz2) - @echo -n " SHA1: " - @cat $(sha1_tgz) - @echo -n " SHA1: " - @cat $(sha1_tbz2) - @echo "" - @echo "GPG signature:" - @echo " $(RELEASE_CAIRO_URL)/$(gpg_file)" - @echo " (signed by `git config --get user.name` <`git config --get user.email`>)" - @echo "" - @echo "Git:" - @echo " git://git.freedesktop.org/git/pixman" - @echo " tag: $(PACKAGE)-$(VERSION)" - @echo "" - @echo "Log:" - @git log --no-merges "$(PACKAGE)-$(PREV)".."$(PACKAGE)-$(VERSION)" | git shortlog | awk '{ printf "\t"; print ; }' | cut -b1-80 - @echo "============================== CUT HERE ==============================" - @echo "" - -release-publish: release-upload release-tag release-publish-message - -.PHONY: release-upload release-publish release-publish-message release-tag - -# Tell versions [3.59,3.63) of GNU make to not export all variables. -# Otherwise a system limit (for SysV at least) may be exceeded. -.NOEXPORT: diff --git a/pixman/README b/pixman/README index 60dff4561..f3c02e4cd 100644 --- a/pixman/README +++ b/pixman/README @@ -1,22 +1,22 @@ -pixman is a library that provides low-level pixel manipulation -features such as image compositing and trapezoid rasterization. - -Please submit bugs & patches to the libpixman bugzilla: - - https://bugs.freedesktop.org/enter_bug.cgi?product=pixman - -All questions regarding this software should be directed to the pixman -mailing list: - - http://lists.freedesktop.org/mailman/listinfo/pixman - -The master development code repository can be found at: - - git://anongit.freedesktop.org/git/pixman - - http://gitweb.freedesktop.org/?p=pixman;a=summary - -For more information on the git code manager, see: - - http://wiki.x.org/wiki/GitPage - +pixman is a library that provides low-level pixel manipulation
+features such as image compositing and trapezoid rasterization.
+
+All questions regarding this software should be directed to the pixman
+mailing list:
+
+ http://lists.freedesktop.org/mailman/listinfo/pixman
+
+Please send patches and bug reports either to the mailing list above,
+or file them at the freedesktop bug tracker:
+
+ https://bugs.freedesktop.org/enter_bug.cgi?product=pixman
+
+The master development code repository can be found at:
+
+ git://anongit.freedesktop.org/git/pixman
+
+ http://gitweb.freedesktop.org/?p=pixman;a=summary
+
+For more information on the git code manager, see:
+
+ http://wiki.x.org/wiki/GitPage
diff --git a/pixman/RELEASING b/pixman/RELEASING new file mode 100644 index 000000000..0103eaec9 --- /dev/null +++ b/pixman/RELEASING @@ -0,0 +1,57 @@ +Here are the steps to follow to create a new pixman release:
+
+1) Ensure that there are no uncommitted changes or unpushed commits,
+ and that you are up to date with the latest commits in the central
+ repository. Here are a couple of useful commands:
+
+ git diff (no output)
+
+ git status (should report "nothing to commit")
+
+ git log master...origin (no output; note: *3* dots)
+
+2) Increment pixman_(major|minor|micro) in configure.ac according to
+ the directions in that file. Use git commit to record this.
+
+3) Make sure that new version works, including
+
+ - make distcheck passes
+
+ - the X server still works with the new pixman version
+ installed
+
+ - the cairo test suite hasn't gained any new failures compared
+ to last pixman version.
+
+4) Use "git commit" to record any changes made in step 3.
+
+5) Generate and publish the tar files by running
+
+ make PREV=<last version> GPGKEY=<your gpg key id> release-publish
+
+ If your freedesktop user name is different from your local one,
+ then also set the variable USER to your freedesktop user name.
+
+6) Run
+
+ make release-publish-message
+
+ to generate a draft release announcement. Edit it as appropriate and
+ send it to
+
+ cairo-announce@cairographics.org
+
+ pixman@lists.freedesktop.org
+
+ xorg-announce@lists.freedesktop.org
+
+7) Increment pixman_micro to the next larger (odd) number in
+ configure.ac. Commit this change, and push all commits created
+ during this process using
+
+ git push
+ git push --tags
+
+ You must use "--tags" here; otherwise the new tag will not
+ be pushed out.
+
diff --git a/pixman/aclocal.m4 b/pixman/aclocal.m4 deleted file mode 100644 index ac960597d..000000000 --- a/pixman/aclocal.m4 +++ /dev/null @@ -1,9117 +0,0 @@ -# generated automatically by aclocal 1.11.1 -*- Autoconf -*- - -# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, -# 2005, 2006, 2007, 2008, 2009 Free Software Foundation, Inc. -# This file is free software; the Free Software Foundation -# gives unlimited permission to copy and/or distribute it, -# with or without modifications, as long as this notice is preserved. - -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY, to the extent permitted by law; without -# even the implied warranty of MERCHANTABILITY or FITNESS FOR A -# PARTICULAR PURPOSE. - -m4_ifndef([AC_AUTOCONF_VERSION], - [m4_copy([m4_PACKAGE_VERSION], [AC_AUTOCONF_VERSION])])dnl -m4_if(m4_defn([AC_AUTOCONF_VERSION]), [2.65],, -[m4_warning([this file was generated for autoconf 2.65. -You have another version of autoconf. It may work, but is not guaranteed to. -If you have problems, you may need to regenerate the build system entirely. -To do so, use the procedure documented by the package, typically `autoreconf'.])]) - -# libtool.m4 - Configure libtool for the host system. -*-Autoconf-*- -# -# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005, -# 2006, 2007, 2008 Free Software Foundation, Inc. -# Written by Gordon Matzigkeit, 1996 -# -# This file is free software; the Free Software Foundation gives -# unlimited permission to copy and/or distribute it, with or without -# modifications, as long as this notice is preserved. - -m4_define([_LT_COPYING], [dnl -# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005, -# 2006, 2007, 2008 Free Software Foundation, Inc. -# Written by Gordon Matzigkeit, 1996 -# -# This file is part of GNU Libtool. -# -# GNU Libtool is free software; you can redistribute it and/or -# modify it under the terms of the GNU General Public License as -# published by the Free Software Foundation; either version 2 of -# the License, or (at your option) any later version. -# -# As a special exception to the GNU General Public License, -# if you distribute this file as part of a program or library that -# is built using GNU Libtool, you may include this file under the -# same distribution terms that you use for the rest of that program. -# -# GNU Libtool is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with GNU Libtool; see the file COPYING. If not, a copy -# can be downloaded from http://www.gnu.org/licenses/gpl.html, or -# obtained by writing to the Free Software Foundation, Inc., -# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. -]) - -# serial 56 LT_INIT - - -# LT_PREREQ(VERSION) -# ------------------ -# Complain and exit if this libtool version is less that VERSION. -m4_defun([LT_PREREQ], -[m4_if(m4_version_compare(m4_defn([LT_PACKAGE_VERSION]), [$1]), -1, - [m4_default([$3], - [m4_fatal([Libtool version $1 or higher is required], - 63)])], - [$2])]) - - -# _LT_CHECK_BUILDDIR -# ------------------ -# Complain if the absolute build directory name contains unusual characters -m4_defun([_LT_CHECK_BUILDDIR], -[case `pwd` in - *\ * | *\ *) - AC_MSG_WARN([Libtool does not cope well with whitespace in `pwd`]) ;; -esac -]) - - -# LT_INIT([OPTIONS]) -# ------------------ -AC_DEFUN([LT_INIT], -[AC_PREREQ([2.58])dnl We use AC_INCLUDES_DEFAULT -AC_BEFORE([$0], [LT_LANG])dnl -AC_BEFORE([$0], [LT_OUTPUT])dnl -AC_BEFORE([$0], [LTDL_INIT])dnl -m4_require([_LT_CHECK_BUILDDIR])dnl - -dnl Autoconf doesn't catch unexpanded LT_ macros by default: -m4_pattern_forbid([^_?LT_[A-Z_]+$])dnl -m4_pattern_allow([^(_LT_EOF|LT_DLGLOBAL|LT_DLLAZY_OR_NOW|LT_MULTI_MODULE)$])dnl -dnl aclocal doesn't pull ltoptions.m4, ltsugar.m4, or ltversion.m4 -dnl unless we require an AC_DEFUNed macro: -AC_REQUIRE([LTOPTIONS_VERSION])dnl -AC_REQUIRE([LTSUGAR_VERSION])dnl -AC_REQUIRE([LTVERSION_VERSION])dnl -AC_REQUIRE([LTOBSOLETE_VERSION])dnl -m4_require([_LT_PROG_LTMAIN])dnl - -dnl Parse OPTIONS -_LT_SET_OPTIONS([$0], [$1]) - -# This can be used to rebuild libtool when needed -LIBTOOL_DEPS="$ltmain" - -# Always use our own libtool. -LIBTOOL='$(SHELL) $(top_builddir)/libtool' -AC_SUBST(LIBTOOL)dnl - -_LT_SETUP - -# Only expand once: -m4_define([LT_INIT]) -])# LT_INIT - -# Old names: -AU_ALIAS([AC_PROG_LIBTOOL], [LT_INIT]) -AU_ALIAS([AM_PROG_LIBTOOL], [LT_INIT]) -dnl aclocal-1.4 backwards compatibility: -dnl AC_DEFUN([AC_PROG_LIBTOOL], []) -dnl AC_DEFUN([AM_PROG_LIBTOOL], []) - - -# _LT_CC_BASENAME(CC) -# ------------------- -# Calculate cc_basename. Skip known compiler wrappers and cross-prefix. -m4_defun([_LT_CC_BASENAME], -[for cc_temp in $1""; do - case $cc_temp in - compile | *[[\\/]]compile | ccache | *[[\\/]]ccache ) ;; - distcc | *[[\\/]]distcc | purify | *[[\\/]]purify ) ;; - \-*) ;; - *) break;; - esac -done -cc_basename=`$ECHO "X$cc_temp" | $Xsed -e 's%.*/%%' -e "s%^$host_alias-%%"` -]) - - -# _LT_FILEUTILS_DEFAULTS -# ---------------------- -# It is okay to use these file commands and assume they have been set -# sensibly after `m4_require([_LT_FILEUTILS_DEFAULTS])'. -m4_defun([_LT_FILEUTILS_DEFAULTS], -[: ${CP="cp -f"} -: ${MV="mv -f"} -: ${RM="rm -f"} -])# _LT_FILEUTILS_DEFAULTS - - -# _LT_SETUP -# --------- -m4_defun([_LT_SETUP], -[AC_REQUIRE([AC_CANONICAL_HOST])dnl -AC_REQUIRE([AC_CANONICAL_BUILD])dnl -_LT_DECL([], [host_alias], [0], [The host system])dnl -_LT_DECL([], [host], [0])dnl -_LT_DECL([], [host_os], [0])dnl -dnl -_LT_DECL([], [build_alias], [0], [The build system])dnl -_LT_DECL([], [build], [0])dnl -_LT_DECL([], [build_os], [0])dnl -dnl -AC_REQUIRE([AC_PROG_CC])dnl -AC_REQUIRE([LT_PATH_LD])dnl -AC_REQUIRE([LT_PATH_NM])dnl -dnl -AC_REQUIRE([AC_PROG_LN_S])dnl -test -z "$LN_S" && LN_S="ln -s" -_LT_DECL([], [LN_S], [1], [Whether we need soft or hard links])dnl -dnl -AC_REQUIRE([LT_CMD_MAX_LEN])dnl -_LT_DECL([objext], [ac_objext], [0], [Object file suffix (normally "o")])dnl -_LT_DECL([], [exeext], [0], [Executable file suffix (normally "")])dnl -dnl -m4_require([_LT_FILEUTILS_DEFAULTS])dnl -m4_require([_LT_CHECK_SHELL_FEATURES])dnl -m4_require([_LT_CMD_RELOAD])dnl -m4_require([_LT_CHECK_MAGIC_METHOD])dnl -m4_require([_LT_CMD_OLD_ARCHIVE])dnl -m4_require([_LT_CMD_GLOBAL_SYMBOLS])dnl - -_LT_CONFIG_LIBTOOL_INIT([ -# See if we are running on zsh, and set the options which allow our -# commands through without removal of \ escapes INIT. -if test -n "\${ZSH_VERSION+set}" ; then - setopt NO_GLOB_SUBST -fi -]) -if test -n "${ZSH_VERSION+set}" ; then - setopt NO_GLOB_SUBST -fi - -_LT_CHECK_OBJDIR - -m4_require([_LT_TAG_COMPILER])dnl -_LT_PROG_ECHO_BACKSLASH - -case $host_os in -aix3*) - # AIX sometimes has problems with the GCC collect2 program. For some - # reason, if we set the COLLECT_NAMES environment variable, the problems - # vanish in a puff of smoke. - if test "X${COLLECT_NAMES+set}" != Xset; then - COLLECT_NAMES= - export COLLECT_NAMES - fi - ;; -esac - -# Sed substitution that helps us do robust quoting. It backslashifies -# metacharacters that are still active within double-quoted strings. -sed_quote_subst='s/\([["`$\\]]\)/\\\1/g' - -# Same as above, but do not quote variable references. -double_quote_subst='s/\([["`\\]]\)/\\\1/g' - -# Sed substitution to delay expansion of an escaped shell variable in a -# double_quote_subst'ed string. -delay_variable_subst='s/\\\\\\\\\\\$/\\\\\\$/g' - -# Sed substitution to delay expansion of an escaped single quote. -delay_single_quote_subst='s/'\''/'\'\\\\\\\'\''/g' - -# Sed substitution to avoid accidental globbing in evaled expressions -no_glob_subst='s/\*/\\\*/g' - -# Global variables: -ofile=libtool -can_build_shared=yes - -# All known linkers require a `.a' archive for static linking (except MSVC, -# which needs '.lib'). -libext=a - -with_gnu_ld="$lt_cv_prog_gnu_ld" - -old_CC="$CC" -old_CFLAGS="$CFLAGS" - -# Set sane defaults for various variables -test -z "$CC" && CC=cc -test -z "$LTCC" && LTCC=$CC -test -z "$LTCFLAGS" && LTCFLAGS=$CFLAGS -test -z "$LD" && LD=ld -test -z "$ac_objext" && ac_objext=o - -_LT_CC_BASENAME([$compiler]) - -# Only perform the check for file, if the check method requires it -test -z "$MAGIC_CMD" && MAGIC_CMD=file -case $deplibs_check_method in -file_magic*) - if test "$file_magic_cmd" = '$MAGIC_CMD'; then - _LT_PATH_MAGIC - fi - ;; -esac - -# Use C for the default configuration in the libtool script -LT_SUPPORTED_TAG([CC]) -_LT_LANG_C_CONFIG -_LT_LANG_DEFAULT_CONFIG -_LT_CONFIG_COMMANDS -])# _LT_SETUP - - -# _LT_PROG_LTMAIN -# --------------- -# Note that this code is called both from `configure', and `config.status' -# now that we use AC_CONFIG_COMMANDS to generate libtool. Notably, -# `config.status' has no value for ac_aux_dir unless we are using Automake, -# so we pass a copy along to make sure it has a sensible value anyway. -m4_defun([_LT_PROG_LTMAIN], -[m4_ifdef([AC_REQUIRE_AUX_FILE], [AC_REQUIRE_AUX_FILE([ltmain.sh])])dnl -_LT_CONFIG_LIBTOOL_INIT([ac_aux_dir='$ac_aux_dir']) -ltmain="$ac_aux_dir/ltmain.sh" -])# _LT_PROG_LTMAIN - - - -# So that we can recreate a full libtool script including additional -# tags, we accumulate the chunks of code to send to AC_CONFIG_COMMANDS -# in macros and then make a single call at the end using the `libtool' -# label. - - -# _LT_CONFIG_LIBTOOL_INIT([INIT-COMMANDS]) -# ---------------------------------------- -# Register INIT-COMMANDS to be passed to AC_CONFIG_COMMANDS later. -m4_define([_LT_CONFIG_LIBTOOL_INIT], -[m4_ifval([$1], - [m4_append([_LT_OUTPUT_LIBTOOL_INIT], - [$1 -])])]) - -# Initialize. -m4_define([_LT_OUTPUT_LIBTOOL_INIT]) - - -# _LT_CONFIG_LIBTOOL([COMMANDS]) -# ------------------------------ -# Register COMMANDS to be passed to AC_CONFIG_COMMANDS later. -m4_define([_LT_CONFIG_LIBTOOL], -[m4_ifval([$1], - [m4_append([_LT_OUTPUT_LIBTOOL_COMMANDS], - [$1 -])])]) - -# Initialize. -m4_define([_LT_OUTPUT_LIBTOOL_COMMANDS]) - - -# _LT_CONFIG_SAVE_COMMANDS([COMMANDS], [INIT_COMMANDS]) -# ----------------------------------------------------- -m4_defun([_LT_CONFIG_SAVE_COMMANDS], -[_LT_CONFIG_LIBTOOL([$1]) -_LT_CONFIG_LIBTOOL_INIT([$2]) -]) - - -# _LT_FORMAT_COMMENT([COMMENT]) -# ----------------------------- -# Add leading comment marks to the start of each line, and a trailing -# full-stop to the whole comment if one is not present already. -m4_define([_LT_FORMAT_COMMENT], -[m4_ifval([$1], [ -m4_bpatsubst([m4_bpatsubst([$1], [^ *], [# ])], - [['`$\]], [\\\&])]m4_bmatch([$1], [[!?.]$], [], [.]) -)]) - - - - - -# _LT_DECL([CONFIGNAME], VARNAME, VALUE, [DESCRIPTION], [IS-TAGGED?]) -# ------------------------------------------------------------------- -# CONFIGNAME is the name given to the value in the libtool script. -# VARNAME is the (base) name used in the configure script. -# VALUE may be 0, 1 or 2 for a computed quote escaped value based on -# VARNAME. Any other value will be used directly. -m4_define([_LT_DECL], -[lt_if_append_uniq([lt_decl_varnames], [$2], [, ], - [lt_dict_add_subkey([lt_decl_dict], [$2], [libtool_name], - [m4_ifval([$1], [$1], [$2])]) - lt_dict_add_subkey([lt_decl_dict], [$2], [value], [$3]) - m4_ifval([$4], - [lt_dict_add_subkey([lt_decl_dict], [$2], [description], [$4])]) - lt_dict_add_subkey([lt_decl_dict], [$2], - [tagged?], [m4_ifval([$5], [yes], [no])])]) -]) - - -# _LT_TAGDECL([CONFIGNAME], VARNAME, VALUE, [DESCRIPTION]) -# -------------------------------------------------------- -m4_define([_LT_TAGDECL], [_LT_DECL([$1], [$2], [$3], [$4], [yes])]) - - -# lt_decl_tag_varnames([SEPARATOR], [VARNAME1...]) -# ------------------------------------------------ -m4_define([lt_decl_tag_varnames], -[_lt_decl_filter([tagged?], [yes], $@)]) - - -# _lt_decl_filter(SUBKEY, VALUE, [SEPARATOR], [VARNAME1..]) -# --------------------------------------------------------- -m4_define([_lt_decl_filter], -[m4_case([$#], - [0], [m4_fatal([$0: too few arguments: $#])], - [1], [m4_fatal([$0: too few arguments: $#: $1])], - [2], [lt_dict_filter([lt_decl_dict], [$1], [$2], [], lt_decl_varnames)], - [3], [lt_dict_filter([lt_decl_dict], [$1], [$2], [$3], lt_decl_varnames)], - [lt_dict_filter([lt_decl_dict], $@)])[]dnl -]) - - -# lt_decl_quote_varnames([SEPARATOR], [VARNAME1...]) -# -------------------------------------------------- -m4_define([lt_decl_quote_varnames], -[_lt_decl_filter([value], [1], $@)]) - - -# lt_decl_dquote_varnames([SEPARATOR], [VARNAME1...]) -# --------------------------------------------------- -m4_define([lt_decl_dquote_varnames], -[_lt_decl_filter([value], [2], $@)]) - - -# lt_decl_varnames_tagged([SEPARATOR], [VARNAME1...]) -# --------------------------------------------------- -m4_define([lt_decl_varnames_tagged], -[m4_assert([$# <= 2])dnl -_$0(m4_quote(m4_default([$1], [[, ]])), - m4_ifval([$2], [[$2]], [m4_dquote(lt_decl_tag_varnames)]), - m4_split(m4_normalize(m4_quote(_LT_TAGS)), [ ]))]) -m4_define([_lt_decl_varnames_tagged], -[m4_ifval([$3], [lt_combine([$1], [$2], [_], $3)])]) - - -# lt_decl_all_varnames([SEPARATOR], [VARNAME1...]) -# ------------------------------------------------ -m4_define([lt_decl_all_varnames], -[_$0(m4_quote(m4_default([$1], [[, ]])), - m4_if([$2], [], - m4_quote(lt_decl_varnames), - m4_quote(m4_shift($@))))[]dnl -]) -m4_define([_lt_decl_all_varnames], -[lt_join($@, lt_decl_varnames_tagged([$1], - lt_decl_tag_varnames([[, ]], m4_shift($@))))dnl -]) - - -# _LT_CONFIG_STATUS_DECLARE([VARNAME]) -# ------------------------------------ -# Quote a variable value, and forward it to `config.status' so that its -# declaration there will have the same value as in `configure'. VARNAME -# must have a single quote delimited value for this to work. -m4_define([_LT_CONFIG_STATUS_DECLARE], -[$1='`$ECHO "X$][$1" | $Xsed -e "$delay_single_quote_subst"`']) - - -# _LT_CONFIG_STATUS_DECLARATIONS -# ------------------------------ -# We delimit libtool config variables with single quotes, so when -# we write them to config.status, we have to be sure to quote all -# embedded single quotes properly. In configure, this macro expands -# each variable declared with _LT_DECL (and _LT_TAGDECL) into: -# -# <var>='`$ECHO "X$<var>" | $Xsed -e "$delay_single_quote_subst"`' -m4_defun([_LT_CONFIG_STATUS_DECLARATIONS], -[m4_foreach([_lt_var], m4_quote(lt_decl_all_varnames), - [m4_n([_LT_CONFIG_STATUS_DECLARE(_lt_var)])])]) - - -# _LT_LIBTOOL_TAGS -# ---------------- -# Output comment and list of tags supported by the script -m4_defun([_LT_LIBTOOL_TAGS], -[_LT_FORMAT_COMMENT([The names of the tagged configurations supported by this script])dnl -available_tags="_LT_TAGS"dnl -]) - - -# _LT_LIBTOOL_DECLARE(VARNAME, [TAG]) -# ----------------------------------- -# Extract the dictionary values for VARNAME (optionally with TAG) and -# expand to a commented shell variable setting: -# -# # Some comment about what VAR is for. -# visible_name=$lt_internal_name -m4_define([_LT_LIBTOOL_DECLARE], -[_LT_FORMAT_COMMENT(m4_quote(lt_dict_fetch([lt_decl_dict], [$1], - [description])))[]dnl -m4_pushdef([_libtool_name], - m4_quote(lt_dict_fetch([lt_decl_dict], [$1], [libtool_name])))[]dnl -m4_case(m4_quote(lt_dict_fetch([lt_decl_dict], [$1], [value])), - [0], [_libtool_name=[$]$1], - [1], [_libtool_name=$lt_[]$1], - [2], [_libtool_name=$lt_[]$1], - [_libtool_name=lt_dict_fetch([lt_decl_dict], [$1], [value])])[]dnl -m4_ifval([$2], [_$2])[]m4_popdef([_libtool_name])[]dnl -]) - - -# _LT_LIBTOOL_CONFIG_VARS -# ----------------------- -# Produce commented declarations of non-tagged libtool config variables -# suitable for insertion in the LIBTOOL CONFIG section of the `libtool' -# script. Tagged libtool config variables (even for the LIBTOOL CONFIG -# section) are produced by _LT_LIBTOOL_TAG_VARS. -m4_defun([_LT_LIBTOOL_CONFIG_VARS], -[m4_foreach([_lt_var], - m4_quote(_lt_decl_filter([tagged?], [no], [], lt_decl_varnames)), - [m4_n([_LT_LIBTOOL_DECLARE(_lt_var)])])]) - - -# _LT_LIBTOOL_TAG_VARS(TAG) -# ------------------------- -m4_define([_LT_LIBTOOL_TAG_VARS], -[m4_foreach([_lt_var], m4_quote(lt_decl_tag_varnames), - [m4_n([_LT_LIBTOOL_DECLARE(_lt_var, [$1])])])]) - - -# _LT_TAGVAR(VARNAME, [TAGNAME]) -# ------------------------------ -m4_define([_LT_TAGVAR], [m4_ifval([$2], [$1_$2], [$1])]) - - -# _LT_CONFIG_COMMANDS -# ------------------- -# Send accumulated output to $CONFIG_STATUS. Thanks to the lists of -# variables for single and double quote escaping we saved from calls -# to _LT_DECL, we can put quote escaped variables declarations -# into `config.status', and then the shell code to quote escape them in -# for loops in `config.status'. Finally, any additional code accumulated -# from calls to _LT_CONFIG_LIBTOOL_INIT is expanded. -m4_defun([_LT_CONFIG_COMMANDS], -[AC_PROVIDE_IFELSE([LT_OUTPUT], - dnl If the libtool generation code has been placed in $CONFIG_LT, - dnl instead of duplicating it all over again into config.status, - dnl then we will have config.status run $CONFIG_LT later, so it - dnl needs to know what name is stored there: - [AC_CONFIG_COMMANDS([libtool], - [$SHELL $CONFIG_LT || AS_EXIT(1)], [CONFIG_LT='$CONFIG_LT'])], - dnl If the libtool generation code is destined for config.status, - dnl expand the accumulated commands and init code now: - [AC_CONFIG_COMMANDS([libtool], - [_LT_OUTPUT_LIBTOOL_COMMANDS], [_LT_OUTPUT_LIBTOOL_COMMANDS_INIT])]) -])#_LT_CONFIG_COMMANDS - - -# Initialize. -m4_define([_LT_OUTPUT_LIBTOOL_COMMANDS_INIT], -[ - -# The HP-UX ksh and POSIX shell print the target directory to stdout -# if CDPATH is set. -(unset CDPATH) >/dev/null 2>&1 && unset CDPATH - -sed_quote_subst='$sed_quote_subst' -double_quote_subst='$double_quote_subst' -delay_variable_subst='$delay_variable_subst' -_LT_CONFIG_STATUS_DECLARATIONS -LTCC='$LTCC' -LTCFLAGS='$LTCFLAGS' -compiler='$compiler_DEFAULT' - -# Quote evaled strings. -for var in lt_decl_all_varnames([[ \ -]], lt_decl_quote_varnames); do - case \`eval \\\\\$ECHO "X\\\\\$\$var"\` in - *[[\\\\\\\`\\"\\\$]]*) - eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"X\\\$\$var\\" | \\\$Xsed -e \\"\\\$sed_quote_subst\\"\\\`\\\\\\"" - ;; - *) - eval "lt_\$var=\\\\\\"\\\$\$var\\\\\\"" - ;; - esac -done - -# Double-quote double-evaled strings. -for var in lt_decl_all_varnames([[ \ -]], lt_decl_dquote_varnames); do - case \`eval \\\\\$ECHO "X\\\\\$\$var"\` in - *[[\\\\\\\`\\"\\\$]]*) - eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"X\\\$\$var\\" | \\\$Xsed -e \\"\\\$double_quote_subst\\" -e \\"\\\$sed_quote_subst\\" -e \\"\\\$delay_variable_subst\\"\\\`\\\\\\"" - ;; - *) - eval "lt_\$var=\\\\\\"\\\$\$var\\\\\\"" - ;; - esac -done - -# Fix-up fallback echo if it was mangled by the above quoting rules. -case \$lt_ECHO in -*'\\\[$]0 --fallback-echo"')dnl " - lt_ECHO=\`\$ECHO "X\$lt_ECHO" | \$Xsed -e 's/\\\\\\\\\\\\\\\[$]0 --fallback-echo"\[$]/\[$]0 --fallback-echo"/'\` - ;; -esac - -_LT_OUTPUT_LIBTOOL_INIT -]) - - -# LT_OUTPUT -# --------- -# This macro allows early generation of the libtool script (before -# AC_OUTPUT is called), incase it is used in configure for compilation -# tests. -AC_DEFUN([LT_OUTPUT], -[: ${CONFIG_LT=./config.lt} -AC_MSG_NOTICE([creating $CONFIG_LT]) -cat >"$CONFIG_LT" <<_LTEOF -#! $SHELL -# Generated by $as_me. -# Run this file to recreate a libtool stub with the current configuration. - -lt_cl_silent=false -SHELL=\${CONFIG_SHELL-$SHELL} -_LTEOF - -cat >>"$CONFIG_LT" <<\_LTEOF -AS_SHELL_SANITIZE -_AS_PREPARE - -exec AS_MESSAGE_FD>&1 -exec AS_MESSAGE_LOG_FD>>config.log -{ - echo - AS_BOX([Running $as_me.]) -} >&AS_MESSAGE_LOG_FD - -lt_cl_help="\ -\`$as_me' creates a local libtool stub from the current configuration, -for use in further configure time tests before the real libtool is -generated. - -Usage: $[0] [[OPTIONS]] - - -h, --help print this help, then exit - -V, --version print version number, then exit - -q, --quiet do not print progress messages - -d, --debug don't remove temporary files - -Report bugs to <bug-libtool@gnu.org>." - -lt_cl_version="\ -m4_ifset([AC_PACKAGE_NAME], [AC_PACKAGE_NAME ])config.lt[]dnl -m4_ifset([AC_PACKAGE_VERSION], [ AC_PACKAGE_VERSION]) -configured by $[0], generated by m4_PACKAGE_STRING. - -Copyright (C) 2008 Free Software Foundation, Inc. -This config.lt script is free software; the Free Software Foundation -gives unlimited permision to copy, distribute and modify it." - -while test $[#] != 0 -do - case $[1] in - --version | --v* | -V ) - echo "$lt_cl_version"; exit 0 ;; - --help | --h* | -h ) - echo "$lt_cl_help"; exit 0 ;; - --debug | --d* | -d ) - debug=: ;; - --quiet | --q* | --silent | --s* | -q ) - lt_cl_silent=: ;; - - -*) AC_MSG_ERROR([unrecognized option: $[1] -Try \`$[0] --help' for more information.]) ;; - - *) AC_MSG_ERROR([unrecognized argument: $[1] -Try \`$[0] --help' for more information.]) ;; - esac - shift -done - -if $lt_cl_silent; then - exec AS_MESSAGE_FD>/dev/null -fi -_LTEOF - -cat >>"$CONFIG_LT" <<_LTEOF -_LT_OUTPUT_LIBTOOL_COMMANDS_INIT -_LTEOF - -cat >>"$CONFIG_LT" <<\_LTEOF -AC_MSG_NOTICE([creating $ofile]) -_LT_OUTPUT_LIBTOOL_COMMANDS -AS_EXIT(0) -_LTEOF -chmod +x "$CONFIG_LT" - -# configure is writing to config.log, but config.lt does its own redirection, -# appending to config.log, which fails on DOS, as config.log is still kept -# open by configure. Here we exec the FD to /dev/null, effectively closing -# config.log, so it can be properly (re)opened and appended to by config.lt. -if test "$no_create" != yes; then - lt_cl_success=: - test "$silent" = yes && - lt_config_lt_args="$lt_config_lt_args --quiet" - exec AS_MESSAGE_LOG_FD>/dev/null - $SHELL "$CONFIG_LT" $lt_config_lt_args || lt_cl_success=false - exec AS_MESSAGE_LOG_FD>>config.log - $lt_cl_success || AS_EXIT(1) -fi -])# LT_OUTPUT - - -# _LT_CONFIG(TAG) -# --------------- -# If TAG is the built-in tag, create an initial libtool script with a -# default configuration from the untagged config vars. Otherwise add code -# to config.status for appending the configuration named by TAG from the -# matching tagged config vars. -m4_defun([_LT_CONFIG], -[m4_require([_LT_FILEUTILS_DEFAULTS])dnl -_LT_CONFIG_SAVE_COMMANDS([ - m4_define([_LT_TAG], m4_if([$1], [], [C], [$1]))dnl - m4_if(_LT_TAG, [C], [ - # See if we are running on zsh, and set the options which allow our - # commands through without removal of \ escapes. - if test -n "${ZSH_VERSION+set}" ; then - setopt NO_GLOB_SUBST - fi - - cfgfile="${ofile}T" - trap "$RM \"$cfgfile\"; exit 1" 1 2 15 - $RM "$cfgfile" - - cat <<_LT_EOF >> "$cfgfile" -#! $SHELL - -# `$ECHO "$ofile" | sed 's%^.*/%%'` - Provide generalized library-building support services. -# Generated automatically by $as_me ($PACKAGE$TIMESTAMP) $VERSION -# Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`: -# NOTE: Changes made to this file will be lost: look at ltmain.sh. -# -_LT_COPYING -_LT_LIBTOOL_TAGS - -# ### BEGIN LIBTOOL CONFIG -_LT_LIBTOOL_CONFIG_VARS -_LT_LIBTOOL_TAG_VARS -# ### END LIBTOOL CONFIG - -_LT_EOF - - case $host_os in - aix3*) - cat <<\_LT_EOF >> "$cfgfile" -# AIX sometimes has problems with the GCC collect2 program. For some -# reason, if we set the COLLECT_NAMES environment variable, the problems -# vanish in a puff of smoke. -if test "X${COLLECT_NAMES+set}" != Xset; then - COLLECT_NAMES= - export COLLECT_NAMES -fi -_LT_EOF - ;; - esac - - _LT_PROG_LTMAIN - - # We use sed instead of cat because bash on DJGPP gets confused if - # if finds mixed CR/LF and LF-only lines. Since sed operates in - # text mode, it properly converts lines to CR/LF. This bash problem - # is reportedly fixed, but why not run on old versions too? - sed '/^# Generated shell functions inserted here/q' "$ltmain" >> "$cfgfile" \ - || (rm -f "$cfgfile"; exit 1) - - _LT_PROG_XSI_SHELLFNS - - sed -n '/^# Generated shell functions inserted here/,$p' "$ltmain" >> "$cfgfile" \ - || (rm -f "$cfgfile"; exit 1) - - mv -f "$cfgfile" "$ofile" || - (rm -f "$ofile" && cp "$cfgfile" "$ofile" && rm -f "$cfgfile") - chmod +x "$ofile" -], -[cat <<_LT_EOF >> "$ofile" - -dnl Unfortunately we have to use $1 here, since _LT_TAG is not expanded -dnl in a comment (ie after a #). -# ### BEGIN LIBTOOL TAG CONFIG: $1 -_LT_LIBTOOL_TAG_VARS(_LT_TAG) -# ### END LIBTOOL TAG CONFIG: $1 -_LT_EOF -])dnl /m4_if -], -[m4_if([$1], [], [ - PACKAGE='$PACKAGE' - VERSION='$VERSION' - TIMESTAMP='$TIMESTAMP' - RM='$RM' - ofile='$ofile'], []) -])dnl /_LT_CONFIG_SAVE_COMMANDS -])# _LT_CONFIG - - -# LT_SUPPORTED_TAG(TAG) -# --------------------- -# Trace this macro to discover what tags are supported by the libtool -# --tag option, using: -# autoconf --trace 'LT_SUPPORTED_TAG:$1' -AC_DEFUN([LT_SUPPORTED_TAG], []) - - -# C support is built-in for now -m4_define([_LT_LANG_C_enabled], []) -m4_define([_LT_TAGS], []) - - -# LT_LANG(LANG) -# ------------- -# Enable libtool support for the given language if not already enabled. -AC_DEFUN([LT_LANG], -[AC_BEFORE([$0], [LT_OUTPUT])dnl -m4_case([$1], - [C], [_LT_LANG(C)], - [C++], [_LT_LANG(CXX)], - [Java], [_LT_LANG(GCJ)], - [Fortran 77], [_LT_LANG(F77)], - [Fortran], [_LT_LANG(FC)], - [Windows Resource], [_LT_LANG(RC)], - [m4_ifdef([_LT_LANG_]$1[_CONFIG], - [_LT_LANG($1)], - [m4_fatal([$0: unsupported language: "$1"])])])dnl -])# LT_LANG - - -# _LT_LANG(LANGNAME) -# ------------------ -m4_defun([_LT_LANG], -[m4_ifdef([_LT_LANG_]$1[_enabled], [], - [LT_SUPPORTED_TAG([$1])dnl - m4_append([_LT_TAGS], [$1 ])dnl - m4_define([_LT_LANG_]$1[_enabled], [])dnl - _LT_LANG_$1_CONFIG($1)])dnl -])# _LT_LANG - - -# _LT_LANG_DEFAULT_CONFIG -# ----------------------- -m4_defun([_LT_LANG_DEFAULT_CONFIG], -[AC_PROVIDE_IFELSE([AC_PROG_CXX], - [LT_LANG(CXX)], - [m4_define([AC_PROG_CXX], defn([AC_PROG_CXX])[LT_LANG(CXX)])]) - -AC_PROVIDE_IFELSE([AC_PROG_F77], - [LT_LANG(F77)], - [m4_define([AC_PROG_F77], defn([AC_PROG_F77])[LT_LANG(F77)])]) - -AC_PROVIDE_IFELSE([AC_PROG_FC], - [LT_LANG(FC)], - [m4_define([AC_PROG_FC], defn([AC_PROG_FC])[LT_LANG(FC)])]) - -dnl The call to [A][M_PROG_GCJ] is quoted like that to stop aclocal -dnl pulling things in needlessly. -AC_PROVIDE_IFELSE([AC_PROG_GCJ], - [LT_LANG(GCJ)], - [AC_PROVIDE_IFELSE([A][M_PROG_GCJ], - [LT_LANG(GCJ)], - [AC_PROVIDE_IFELSE([LT_PROG_GCJ], - [LT_LANG(GCJ)], - [m4_ifdef([AC_PROG_GCJ], - [m4_define([AC_PROG_GCJ], defn([AC_PROG_GCJ])[LT_LANG(GCJ)])]) - m4_ifdef([A][M_PROG_GCJ], - [m4_define([A][M_PROG_GCJ], defn([A][M_PROG_GCJ])[LT_LANG(GCJ)])]) - m4_ifdef([LT_PROG_GCJ], - [m4_define([LT_PROG_GCJ], defn([LT_PROG_GCJ])[LT_LANG(GCJ)])])])])]) - -AC_PROVIDE_IFELSE([LT_PROG_RC], - [LT_LANG(RC)], - [m4_define([LT_PROG_RC], defn([LT_PROG_RC])[LT_LANG(RC)])]) -])# _LT_LANG_DEFAULT_CONFIG - -# Obsolete macros: -AU_DEFUN([AC_LIBTOOL_CXX], [LT_LANG(C++)]) -AU_DEFUN([AC_LIBTOOL_F77], [LT_LANG(Fortran 77)]) -AU_DEFUN([AC_LIBTOOL_FC], [LT_LANG(Fortran)]) -AU_DEFUN([AC_LIBTOOL_GCJ], [LT_LANG(Java)]) -dnl aclocal-1.4 backwards compatibility: -dnl AC_DEFUN([AC_LIBTOOL_CXX], []) -dnl AC_DEFUN([AC_LIBTOOL_F77], []) -dnl AC_DEFUN([AC_LIBTOOL_FC], []) -dnl AC_DEFUN([AC_LIBTOOL_GCJ], []) - - -# _LT_TAG_COMPILER -# ---------------- -m4_defun([_LT_TAG_COMPILER], -[AC_REQUIRE([AC_PROG_CC])dnl - -_LT_DECL([LTCC], [CC], [1], [A C compiler])dnl -_LT_DECL([LTCFLAGS], [CFLAGS], [1], [LTCC compiler flags])dnl -_LT_TAGDECL([CC], [compiler], [1], [A language specific compiler])dnl -_LT_TAGDECL([with_gcc], [GCC], [0], [Is the compiler the GNU compiler?])dnl - -# If no C compiler was specified, use CC. -LTCC=${LTCC-"$CC"} - -# If no C compiler flags were specified, use CFLAGS. -LTCFLAGS=${LTCFLAGS-"$CFLAGS"} - -# Allow CC to be a program name with arguments. -compiler=$CC -])# _LT_TAG_COMPILER - - -# _LT_COMPILER_BOILERPLATE -# ------------------------ -# Check for compiler boilerplate output or warnings with -# the simple compiler test code. -m4_defun([_LT_COMPILER_BOILERPLATE], -[m4_require([_LT_DECL_SED])dnl -ac_outfile=conftest.$ac_objext -echo "$lt_simple_compile_test_code" >conftest.$ac_ext -eval "$ac_compile" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err -_lt_compiler_boilerplate=`cat conftest.err` -$RM conftest* -])# _LT_COMPILER_BOILERPLATE - - -# _LT_LINKER_BOILERPLATE -# ---------------------- -# Check for linker boilerplate output or warnings with -# the simple link test code. -m4_defun([_LT_LINKER_BOILERPLATE], -[m4_require([_LT_DECL_SED])dnl -ac_outfile=conftest.$ac_objext -echo "$lt_simple_link_test_code" >conftest.$ac_ext -eval "$ac_link" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err -_lt_linker_boilerplate=`cat conftest.err` -$RM -r conftest* -])# _LT_LINKER_BOILERPLATE - -# _LT_REQUIRED_DARWIN_CHECKS -# ------------------------- -m4_defun_once([_LT_REQUIRED_DARWIN_CHECKS],[ - case $host_os in - rhapsody* | darwin*) - AC_CHECK_TOOL([DSYMUTIL], [dsymutil], [:]) - AC_CHECK_TOOL([NMEDIT], [nmedit], [:]) - AC_CHECK_TOOL([LIPO], [lipo], [:]) - AC_CHECK_TOOL([OTOOL], [otool], [:]) - AC_CHECK_TOOL([OTOOL64], [otool64], [:]) - _LT_DECL([], [DSYMUTIL], [1], - [Tool to manipulate archived DWARF debug symbol files on Mac OS X]) - _LT_DECL([], [NMEDIT], [1], - [Tool to change global to local symbols on Mac OS X]) - _LT_DECL([], [LIPO], [1], - [Tool to manipulate fat objects and archives on Mac OS X]) - _LT_DECL([], [OTOOL], [1], - [ldd/readelf like tool for Mach-O binaries on Mac OS X]) - _LT_DECL([], [OTOOL64], [1], - [ldd/readelf like tool for 64 bit Mach-O binaries on Mac OS X 10.4]) - - AC_CACHE_CHECK([for -single_module linker flag],[lt_cv_apple_cc_single_mod], - [lt_cv_apple_cc_single_mod=no - if test -z "${LT_MULTI_MODULE}"; then - # By default we will add the -single_module flag. You can override - # by either setting the environment variable LT_MULTI_MODULE - # non-empty at configure time, or by adding -multi_module to the - # link flags. - rm -rf libconftest.dylib* - echo "int foo(void){return 1;}" > conftest.c - echo "$LTCC $LTCFLAGS $LDFLAGS -o libconftest.dylib \ --dynamiclib -Wl,-single_module conftest.c" >&AS_MESSAGE_LOG_FD - $LTCC $LTCFLAGS $LDFLAGS -o libconftest.dylib \ - -dynamiclib -Wl,-single_module conftest.c 2>conftest.err - _lt_result=$? - if test -f libconftest.dylib && test ! -s conftest.err && test $_lt_result = 0; then - lt_cv_apple_cc_single_mod=yes - else - cat conftest.err >&AS_MESSAGE_LOG_FD - fi - rm -rf libconftest.dylib* - rm -f conftest.* - fi]) - AC_CACHE_CHECK([for -exported_symbols_list linker flag], - [lt_cv_ld_exported_symbols_list], - [lt_cv_ld_exported_symbols_list=no - save_LDFLAGS=$LDFLAGS - echo "_main" > conftest.sym - LDFLAGS="$LDFLAGS -Wl,-exported_symbols_list,conftest.sym" - AC_LINK_IFELSE([AC_LANG_PROGRAM([],[])], - [lt_cv_ld_exported_symbols_list=yes], - [lt_cv_ld_exported_symbols_list=no]) - LDFLAGS="$save_LDFLAGS" - ]) - case $host_os in - rhapsody* | darwin1.[[012]]) - _lt_dar_allow_undefined='${wl}-undefined ${wl}suppress' ;; - darwin1.*) - _lt_dar_allow_undefined='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' ;; - darwin*) # darwin 5.x on - # if running on 10.5 or later, the deployment target defaults - # to the OS version, if on x86, and 10.4, the deployment - # target defaults to 10.4. Don't you love it? - case ${MACOSX_DEPLOYMENT_TARGET-10.0},$host in - 10.0,*86*-darwin8*|10.0,*-darwin[[91]]*) - _lt_dar_allow_undefined='${wl}-undefined ${wl}dynamic_lookup' ;; - 10.[[012]]*) - _lt_dar_allow_undefined='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' ;; - 10.*) - _lt_dar_allow_undefined='${wl}-undefined ${wl}dynamic_lookup' ;; - esac - ;; - esac - if test "$lt_cv_apple_cc_single_mod" = "yes"; then - _lt_dar_single_mod='$single_module' - fi - if test "$lt_cv_ld_exported_symbols_list" = "yes"; then - _lt_dar_export_syms=' ${wl}-exported_symbols_list,$output_objdir/${libname}-symbols.expsym' - else - _lt_dar_export_syms='~$NMEDIT -s $output_objdir/${libname}-symbols.expsym ${lib}' - fi - if test "$DSYMUTIL" != ":"; then - _lt_dsymutil='~$DSYMUTIL $lib || :' - else - _lt_dsymutil= - fi - ;; - esac -]) - - -# _LT_DARWIN_LINKER_FEATURES -# -------------------------- -# Checks for linker and compiler features on darwin -m4_defun([_LT_DARWIN_LINKER_FEATURES], -[ - m4_require([_LT_REQUIRED_DARWIN_CHECKS]) - _LT_TAGVAR(archive_cmds_need_lc, $1)=no - _LT_TAGVAR(hardcode_direct, $1)=no - _LT_TAGVAR(hardcode_automatic, $1)=yes - _LT_TAGVAR(hardcode_shlibpath_var, $1)=unsupported - _LT_TAGVAR(whole_archive_flag_spec, $1)='' - _LT_TAGVAR(link_all_deplibs, $1)=yes - _LT_TAGVAR(allow_undefined_flag, $1)="$_lt_dar_allow_undefined" - case $cc_basename in - ifort*) _lt_dar_can_shared=yes ;; - *) _lt_dar_can_shared=$GCC ;; - esac - if test "$_lt_dar_can_shared" = "yes"; then - output_verbose_link_cmd=echo - _LT_TAGVAR(archive_cmds, $1)="\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring $_lt_dar_single_mod${_lt_dsymutil}" - _LT_TAGVAR(module_cmds, $1)="\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dsymutil}" - _LT_TAGVAR(archive_expsym_cmds, $1)="sed 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring ${_lt_dar_single_mod}${_lt_dar_export_syms}${_lt_dsymutil}" - _LT_TAGVAR(module_expsym_cmds, $1)="sed -e 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dar_export_syms}${_lt_dsymutil}" - m4_if([$1], [CXX], -[ if test "$lt_cv_apple_cc_single_mod" != "yes"; then - _LT_TAGVAR(archive_cmds, $1)="\$CC -r -keep_private_externs -nostdlib -o \${lib}-master.o \$libobjs~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \${lib}-master.o \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring${_lt_dsymutil}" - _LT_TAGVAR(archive_expsym_cmds, $1)="sed 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC -r -keep_private_externs -nostdlib -o \${lib}-master.o \$libobjs~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \${lib}-master.o \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring${_lt_dar_export_syms}${_lt_dsymutil}" - fi -],[]) - else - _LT_TAGVAR(ld_shlibs, $1)=no - fi -]) - -# _LT_SYS_MODULE_PATH_AIX -# ----------------------- -# Links a minimal program and checks the executable -# for the system default hardcoded library path. In most cases, -# this is /usr/lib:/lib, but when the MPI compilers are used -# the location of the communication and MPI libs are included too. -# If we don't find anything, use the default library path according -# to the aix ld manual. -m4_defun([_LT_SYS_MODULE_PATH_AIX], -[m4_require([_LT_DECL_SED])dnl -AC_LINK_IFELSE(AC_LANG_PROGRAM,[ -lt_aix_libpath_sed=' - /Import File Strings/,/^$/ { - /^0/ { - s/^0 *\(.*\)$/\1/ - p - } - }' -aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` -# Check for a 64-bit object if we didn't find anything. -if test -z "$aix_libpath"; then - aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` -fi],[]) -if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi -])# _LT_SYS_MODULE_PATH_AIX - - -# _LT_SHELL_INIT(ARG) -# ------------------- -m4_define([_LT_SHELL_INIT], -[ifdef([AC_DIVERSION_NOTICE], - [AC_DIVERT_PUSH(AC_DIVERSION_NOTICE)], - [AC_DIVERT_PUSH(NOTICE)]) -$1 -AC_DIVERT_POP -])# _LT_SHELL_INIT - - -# _LT_PROG_ECHO_BACKSLASH -# ----------------------- -# Add some code to the start of the generated configure script which -# will find an echo command which doesn't interpret backslashes. -m4_defun([_LT_PROG_ECHO_BACKSLASH], -[_LT_SHELL_INIT([ -# Check that we are running under the correct shell. -SHELL=${CONFIG_SHELL-/bin/sh} - -case X$lt_ECHO in -X*--fallback-echo) - # Remove one level of quotation (which was required for Make). - ECHO=`echo "$lt_ECHO" | sed 's,\\\\\[$]\\[$]0,'[$]0','` - ;; -esac - -ECHO=${lt_ECHO-echo} -if test "X[$]1" = X--no-reexec; then - # Discard the --no-reexec flag, and continue. - shift -elif test "X[$]1" = X--fallback-echo; then - # Avoid inline document here, it may be left over - : -elif test "X`{ $ECHO '\t'; } 2>/dev/null`" = 'X\t' ; then - # Yippee, $ECHO works! - : -else - # Restart under the correct shell. - exec $SHELL "[$]0" --no-reexec ${1+"[$]@"} -fi - -if test "X[$]1" = X--fallback-echo; then - # used as fallback echo - shift - cat <<_LT_EOF -[$]* -_LT_EOF - exit 0 -fi - -# The HP-UX ksh and POSIX shell print the target directory to stdout -# if CDPATH is set. -(unset CDPATH) >/dev/null 2>&1 && unset CDPATH - -if test -z "$lt_ECHO"; then - if test "X${echo_test_string+set}" != Xset; then - # find a string as large as possible, as long as the shell can cope with it - for cmd in 'sed 50q "[$]0"' 'sed 20q "[$]0"' 'sed 10q "[$]0"' 'sed 2q "[$]0"' 'echo test'; do - # expected sizes: less than 2Kb, 1Kb, 512 bytes, 16 bytes, ... - if { echo_test_string=`eval $cmd`; } 2>/dev/null && - { test "X$echo_test_string" = "X$echo_test_string"; } 2>/dev/null - then - break - fi - done - fi - - if test "X`{ $ECHO '\t'; } 2>/dev/null`" = 'X\t' && - echo_testing_string=`{ $ECHO "$echo_test_string"; } 2>/dev/null` && - test "X$echo_testing_string" = "X$echo_test_string"; then - : - else - # The Solaris, AIX, and Digital Unix default echo programs unquote - # backslashes. This makes it impossible to quote backslashes using - # echo "$something" | sed 's/\\/\\\\/g' - # - # So, first we look for a working echo in the user's PATH. - - lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR - for dir in $PATH /usr/ucb; do - IFS="$lt_save_ifs" - if (test -f $dir/echo || test -f $dir/echo$ac_exeext) && - test "X`($dir/echo '\t') 2>/dev/null`" = 'X\t' && - echo_testing_string=`($dir/echo "$echo_test_string") 2>/dev/null` && - test "X$echo_testing_string" = "X$echo_test_string"; then - ECHO="$dir/echo" - break - fi - done - IFS="$lt_save_ifs" - - if test "X$ECHO" = Xecho; then - # We didn't find a better echo, so look for alternatives. - if test "X`{ print -r '\t'; } 2>/dev/null`" = 'X\t' && - echo_testing_string=`{ print -r "$echo_test_string"; } 2>/dev/null` && - test "X$echo_testing_string" = "X$echo_test_string"; then - # This shell has a builtin print -r that does the trick. - ECHO='print -r' - elif { test -f /bin/ksh || test -f /bin/ksh$ac_exeext; } && - test "X$CONFIG_SHELL" != X/bin/ksh; then - # If we have ksh, try running configure again with it. - ORIGINAL_CONFIG_SHELL=${CONFIG_SHELL-/bin/sh} - export ORIGINAL_CONFIG_SHELL - CONFIG_SHELL=/bin/ksh - export CONFIG_SHELL - exec $CONFIG_SHELL "[$]0" --no-reexec ${1+"[$]@"} - else - # Try using printf. - ECHO='printf %s\n' - if test "X`{ $ECHO '\t'; } 2>/dev/null`" = 'X\t' && - echo_testing_string=`{ $ECHO "$echo_test_string"; } 2>/dev/null` && - test "X$echo_testing_string" = "X$echo_test_string"; then - # Cool, printf works - : - elif echo_testing_string=`($ORIGINAL_CONFIG_SHELL "[$]0" --fallback-echo '\t') 2>/dev/null` && - test "X$echo_testing_string" = 'X\t' && - echo_testing_string=`($ORIGINAL_CONFIG_SHELL "[$]0" --fallback-echo "$echo_test_string") 2>/dev/null` && - test "X$echo_testing_string" = "X$echo_test_string"; then - CONFIG_SHELL=$ORIGINAL_CONFIG_SHELL - export CONFIG_SHELL - SHELL="$CONFIG_SHELL" - export SHELL - ECHO="$CONFIG_SHELL [$]0 --fallback-echo" - elif echo_testing_string=`($CONFIG_SHELL "[$]0" --fallback-echo '\t') 2>/dev/null` && - test "X$echo_testing_string" = 'X\t' && - echo_testing_string=`($CONFIG_SHELL "[$]0" --fallback-echo "$echo_test_string") 2>/dev/null` && - test "X$echo_testing_string" = "X$echo_test_string"; then - ECHO="$CONFIG_SHELL [$]0 --fallback-echo" - else - # maybe with a smaller string... - prev=: - - for cmd in 'echo test' 'sed 2q "[$]0"' 'sed 10q "[$]0"' 'sed 20q "[$]0"' 'sed 50q "[$]0"'; do - if { test "X$echo_test_string" = "X`eval $cmd`"; } 2>/dev/null - then - break - fi - prev="$cmd" - done - - if test "$prev" != 'sed 50q "[$]0"'; then - echo_test_string=`eval $prev` - export echo_test_string - exec ${ORIGINAL_CONFIG_SHELL-${CONFIG_SHELL-/bin/sh}} "[$]0" ${1+"[$]@"} - else - # Oops. We lost completely, so just stick with echo. - ECHO=echo - fi - fi - fi - fi - fi -fi - -# Copy echo and quote the copy suitably for passing to libtool from -# the Makefile, instead of quoting the original, which is used later. -lt_ECHO=$ECHO -if test "X$lt_ECHO" = "X$CONFIG_SHELL [$]0 --fallback-echo"; then - lt_ECHO="$CONFIG_SHELL \\\$\[$]0 --fallback-echo" -fi - -AC_SUBST(lt_ECHO) -]) -_LT_DECL([], [SHELL], [1], [Shell to use when invoking shell scripts]) -_LT_DECL([], [ECHO], [1], - [An echo program that does not interpret backslashes]) -])# _LT_PROG_ECHO_BACKSLASH - - -# _LT_ENABLE_LOCK -# --------------- -m4_defun([_LT_ENABLE_LOCK], -[AC_ARG_ENABLE([libtool-lock], - [AS_HELP_STRING([--disable-libtool-lock], - [avoid locking (might break parallel builds)])]) -test "x$enable_libtool_lock" != xno && enable_libtool_lock=yes - -# Some flags need to be propagated to the compiler or linker for good -# libtool support. -case $host in -ia64-*-hpux*) - # Find out which ABI we are using. - echo 'int i;' > conftest.$ac_ext - if AC_TRY_EVAL(ac_compile); then - case `/usr/bin/file conftest.$ac_objext` in - *ELF-32*) - HPUX_IA64_MODE="32" - ;; - *ELF-64*) - HPUX_IA64_MODE="64" - ;; - esac - fi - rm -rf conftest* - ;; -*-*-irix6*) - # Find out which ABI we are using. - echo '[#]line __oline__ "configure"' > conftest.$ac_ext - if AC_TRY_EVAL(ac_compile); then - if test "$lt_cv_prog_gnu_ld" = yes; then - case `/usr/bin/file conftest.$ac_objext` in - *32-bit*) - LD="${LD-ld} -melf32bsmip" - ;; - *N32*) - LD="${LD-ld} -melf32bmipn32" - ;; - *64-bit*) - LD="${LD-ld} -melf64bmip" - ;; - esac - else - case `/usr/bin/file conftest.$ac_objext` in - *32-bit*) - LD="${LD-ld} -32" - ;; - *N32*) - LD="${LD-ld} -n32" - ;; - *64-bit*) - LD="${LD-ld} -64" - ;; - esac - fi - fi - rm -rf conftest* - ;; - -x86_64-*kfreebsd*-gnu|x86_64-*linux*|ppc*-*linux*|powerpc*-*linux*| \ -s390*-*linux*|s390*-*tpf*|sparc*-*linux*) - # Find out which ABI we are using. - echo 'int i;' > conftest.$ac_ext - if AC_TRY_EVAL(ac_compile); then - case `/usr/bin/file conftest.o` in - *32-bit*) - case $host in - x86_64-*kfreebsd*-gnu) - LD="${LD-ld} -m elf_i386_fbsd" - ;; - x86_64-*linux*) - LD="${LD-ld} -m elf_i386" - ;; - ppc64-*linux*|powerpc64-*linux*) - LD="${LD-ld} -m elf32ppclinux" - ;; - s390x-*linux*) - LD="${LD-ld} -m elf_s390" - ;; - sparc64-*linux*) - LD="${LD-ld} -m elf32_sparc" - ;; - esac - ;; - *64-bit*) - case $host in - x86_64-*kfreebsd*-gnu) - LD="${LD-ld} -m elf_x86_64_fbsd" - ;; - x86_64-*linux*) - LD="${LD-ld} -m elf_x86_64" - ;; - ppc*-*linux*|powerpc*-*linux*) - LD="${LD-ld} -m elf64ppc" - ;; - s390*-*linux*|s390*-*tpf*) - LD="${LD-ld} -m elf64_s390" - ;; - sparc*-*linux*) - LD="${LD-ld} -m elf64_sparc" - ;; - esac - ;; - esac - fi - rm -rf conftest* - ;; - -*-*-sco3.2v5*) - # On SCO OpenServer 5, we need -belf to get full-featured binaries. - SAVE_CFLAGS="$CFLAGS" - CFLAGS="$CFLAGS -belf" - AC_CACHE_CHECK([whether the C compiler needs -belf], lt_cv_cc_needs_belf, - [AC_LANG_PUSH(C) - AC_LINK_IFELSE([AC_LANG_PROGRAM([[]],[[]])],[lt_cv_cc_needs_belf=yes],[lt_cv_cc_needs_belf=no]) - AC_LANG_POP]) - if test x"$lt_cv_cc_needs_belf" != x"yes"; then - # this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf - CFLAGS="$SAVE_CFLAGS" - fi - ;; -sparc*-*solaris*) - # Find out which ABI we are using. - echo 'int i;' > conftest.$ac_ext - if AC_TRY_EVAL(ac_compile); then - case `/usr/bin/file conftest.o` in - *64-bit*) - case $lt_cv_prog_gnu_ld in - yes*) LD="${LD-ld} -m elf64_sparc" ;; - *) - if ${LD-ld} -64 -r -o conftest2.o conftest.o >/dev/null 2>&1; then - LD="${LD-ld} -64" - fi - ;; - esac - ;; - esac - fi - rm -rf conftest* - ;; -esac - -need_locks="$enable_libtool_lock" -])# _LT_ENABLE_LOCK - - -# _LT_CMD_OLD_ARCHIVE -# ------------------- -m4_defun([_LT_CMD_OLD_ARCHIVE], -[AC_CHECK_TOOL(AR, ar, false) -test -z "$AR" && AR=ar -test -z "$AR_FLAGS" && AR_FLAGS=cru -_LT_DECL([], [AR], [1], [The archiver]) -_LT_DECL([], [AR_FLAGS], [1]) - -AC_CHECK_TOOL(STRIP, strip, :) -test -z "$STRIP" && STRIP=: -_LT_DECL([], [STRIP], [1], [A symbol stripping program]) - -AC_CHECK_TOOL(RANLIB, ranlib, :) -test -z "$RANLIB" && RANLIB=: -_LT_DECL([], [RANLIB], [1], - [Commands used to install an old-style archive]) - -# Determine commands to create old-style static archives. -old_archive_cmds='$AR $AR_FLAGS $oldlib$oldobjs' -old_postinstall_cmds='chmod 644 $oldlib' -old_postuninstall_cmds= - -if test -n "$RANLIB"; then - case $host_os in - openbsd*) - old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB -t \$oldlib" - ;; - *) - old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB \$oldlib" - ;; - esac - old_archive_cmds="$old_archive_cmds~\$RANLIB \$oldlib" -fi -_LT_DECL([], [old_postinstall_cmds], [2]) -_LT_DECL([], [old_postuninstall_cmds], [2]) -_LT_TAGDECL([], [old_archive_cmds], [2], - [Commands used to build an old-style archive]) -])# _LT_CMD_OLD_ARCHIVE - - -# _LT_COMPILER_OPTION(MESSAGE, VARIABLE-NAME, FLAGS, -# [OUTPUT-FILE], [ACTION-SUCCESS], [ACTION-FAILURE]) -# ---------------------------------------------------------------- -# Check whether the given compiler option works -AC_DEFUN([_LT_COMPILER_OPTION], -[m4_require([_LT_FILEUTILS_DEFAULTS])dnl -m4_require([_LT_DECL_SED])dnl -AC_CACHE_CHECK([$1], [$2], - [$2=no - m4_if([$4], , [ac_outfile=conftest.$ac_objext], [ac_outfile=$4]) - echo "$lt_simple_compile_test_code" > conftest.$ac_ext - lt_compiler_flag="$3" - # Insert the option either (1) after the last *FLAGS variable, or - # (2) before a word containing "conftest.", or (3) at the end. - # Note that $ac_compile itself does not contain backslashes and begins - # with a dollar sign (not a hyphen), so the echo should work correctly. - # The option is referenced via a variable to avoid confusing sed. - lt_compile=`echo "$ac_compile" | $SED \ - -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ - -e 's: [[^ ]]*conftest\.: $lt_compiler_flag&:; t' \ - -e 's:$: $lt_compiler_flag:'` - (eval echo "\"\$as_me:__oline__: $lt_compile\"" >&AS_MESSAGE_LOG_FD) - (eval "$lt_compile" 2>conftest.err) - ac_status=$? - cat conftest.err >&AS_MESSAGE_LOG_FD - echo "$as_me:__oline__: \$? = $ac_status" >&AS_MESSAGE_LOG_FD - if (exit $ac_status) && test -s "$ac_outfile"; then - # The compiler can only warn and ignore the option if not recognized - # So say no if there are warnings other than the usual output. - $ECHO "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' >conftest.exp - $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2 - if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then - $2=yes - fi - fi - $RM conftest* -]) - -if test x"[$]$2" = xyes; then - m4_if([$5], , :, [$5]) -else - m4_if([$6], , :, [$6]) -fi -])# _LT_COMPILER_OPTION - -# Old name: -AU_ALIAS([AC_LIBTOOL_COMPILER_OPTION], [_LT_COMPILER_OPTION]) -dnl aclocal-1.4 backwards compatibility: -dnl AC_DEFUN([AC_LIBTOOL_COMPILER_OPTION], []) - - -# _LT_LINKER_OPTION(MESSAGE, VARIABLE-NAME, FLAGS, -# [ACTION-SUCCESS], [ACTION-FAILURE]) -# ---------------------------------------------------- -# Check whether the given linker option works -AC_DEFUN([_LT_LINKER_OPTION], -[m4_require([_LT_FILEUTILS_DEFAULTS])dnl -m4_require([_LT_DECL_SED])dnl -AC_CACHE_CHECK([$1], [$2], - [$2=no - save_LDFLAGS="$LDFLAGS" - LDFLAGS="$LDFLAGS $3" - echo "$lt_simple_link_test_code" > conftest.$ac_ext - if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then - # The linker can only warn and ignore the option if not recognized - # So say no if there are warnings - if test -s conftest.err; then - # Append any errors to the config.log. - cat conftest.err 1>&AS_MESSAGE_LOG_FD - $ECHO "X$_lt_linker_boilerplate" | $Xsed -e '/^$/d' > conftest.exp - $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2 - if diff conftest.exp conftest.er2 >/dev/null; then - $2=yes - fi - else - $2=yes - fi - fi - $RM -r conftest* - LDFLAGS="$save_LDFLAGS" -]) - -if test x"[$]$2" = xyes; then - m4_if([$4], , :, [$4]) -else - m4_if([$5], , :, [$5]) -fi -])# _LT_LINKER_OPTION - -# Old name: -AU_ALIAS([AC_LIBTOOL_LINKER_OPTION], [_LT_LINKER_OPTION]) -dnl aclocal-1.4 backwards compatibility: -dnl AC_DEFUN([AC_LIBTOOL_LINKER_OPTION], []) - - -# LT_CMD_MAX_LEN -#--------------- -AC_DEFUN([LT_CMD_MAX_LEN], -[AC_REQUIRE([AC_CANONICAL_HOST])dnl -# find the maximum length of command line arguments -AC_MSG_CHECKING([the maximum length of command line arguments]) -AC_CACHE_VAL([lt_cv_sys_max_cmd_len], [dnl - i=0 - teststring="ABCD" - - case $build_os in - msdosdjgpp*) - # On DJGPP, this test can blow up pretty badly due to problems in libc - # (any single argument exceeding 2000 bytes causes a buffer overrun - # during glob expansion). Even if it were fixed, the result of this - # check would be larger than it should be. - lt_cv_sys_max_cmd_len=12288; # 12K is about right - ;; - - gnu*) - # Under GNU Hurd, this test is not required because there is - # no limit to the length of command line arguments. - # Libtool will interpret -1 as no limit whatsoever - lt_cv_sys_max_cmd_len=-1; - ;; - - cygwin* | mingw* | cegcc*) - # On Win9x/ME, this test blows up -- it succeeds, but takes - # about 5 minutes as the teststring grows exponentially. - # Worse, since 9x/ME are not pre-emptively multitasking, - # you end up with a "frozen" computer, even though with patience - # the test eventually succeeds (with a max line length of 256k). - # Instead, let's just punt: use the minimum linelength reported by - # all of the supported platforms: 8192 (on NT/2K/XP). - lt_cv_sys_max_cmd_len=8192; - ;; - - amigaos*) - # On AmigaOS with pdksh, this test takes hours, literally. - # So we just punt and use a minimum line length of 8192. - lt_cv_sys_max_cmd_len=8192; - ;; - - netbsd* | freebsd* | openbsd* | darwin* | dragonfly*) - # This has been around since 386BSD, at least. Likely further. - if test -x /sbin/sysctl; then - lt_cv_sys_max_cmd_len=`/sbin/sysctl -n kern.argmax` - elif test -x /usr/sbin/sysctl; then - lt_cv_sys_max_cmd_len=`/usr/sbin/sysctl -n kern.argmax` - else - lt_cv_sys_max_cmd_len=65536 # usable default for all BSDs - fi - # And add a safety zone - lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4` - lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3` - ;; - - interix*) - # We know the value 262144 and hardcode it with a safety zone (like BSD) - lt_cv_sys_max_cmd_len=196608 - ;; - - osf*) - # Dr. Hans Ekkehard Plesser reports seeing a kernel panic running configure - # due to this test when exec_disable_arg_limit is 1 on Tru64. It is not - # nice to cause kernel panics so lets avoid the loop below. - # First set a reasonable default. - lt_cv_sys_max_cmd_len=16384 - # - if test -x /sbin/sysconfig; then - case `/sbin/sysconfig -q proc exec_disable_arg_limit` in - *1*) lt_cv_sys_max_cmd_len=-1 ;; - esac - fi - ;; - sco3.2v5*) - lt_cv_sys_max_cmd_len=102400 - ;; - sysv5* | sco5v6* | sysv4.2uw2*) - kargmax=`grep ARG_MAX /etc/conf/cf.d/stune 2>/dev/null` - if test -n "$kargmax"; then - lt_cv_sys_max_cmd_len=`echo $kargmax | sed 's/.*[[ ]]//'` - else - lt_cv_sys_max_cmd_len=32768 - fi - ;; - *) - lt_cv_sys_max_cmd_len=`(getconf ARG_MAX) 2> /dev/null` - if test -n "$lt_cv_sys_max_cmd_len"; then - lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4` - lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3` - else - # Make teststring a little bigger before we do anything with it. - # a 1K string should be a reasonable start. - for i in 1 2 3 4 5 6 7 8 ; do - teststring=$teststring$teststring - done - SHELL=${SHELL-${CONFIG_SHELL-/bin/sh}} - # If test is not a shell built-in, we'll probably end up computing a - # maximum length that is only half of the actual maximum length, but - # we can't tell. - while { test "X"`$SHELL [$]0 --fallback-echo "X$teststring$teststring" 2>/dev/null` \ - = "XX$teststring$teststring"; } >/dev/null 2>&1 && - test $i != 17 # 1/2 MB should be enough - do - i=`expr $i + 1` - teststring=$teststring$teststring - done - # Only check the string length outside the loop. - lt_cv_sys_max_cmd_len=`expr "X$teststring" : ".*" 2>&1` - teststring= - # Add a significant safety factor because C++ compilers can tack on - # massive amounts of additional arguments before passing them to the - # linker. It appears as though 1/2 is a usable value. - lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 2` - fi - ;; - esac -]) -if test -n $lt_cv_sys_max_cmd_len ; then - AC_MSG_RESULT($lt_cv_sys_max_cmd_len) -else - AC_MSG_RESULT(none) -fi -max_cmd_len=$lt_cv_sys_max_cmd_len -_LT_DECL([], [max_cmd_len], [0], - [What is the maximum length of a command?]) -])# LT_CMD_MAX_LEN - -# Old name: -AU_ALIAS([AC_LIBTOOL_SYS_MAX_CMD_LEN], [LT_CMD_MAX_LEN]) -dnl aclocal-1.4 backwards compatibility: -dnl AC_DEFUN([AC_LIBTOOL_SYS_MAX_CMD_LEN], []) - - -# _LT_HEADER_DLFCN -# ---------------- -m4_defun([_LT_HEADER_DLFCN], -[AC_CHECK_HEADERS([dlfcn.h], [], [], [AC_INCLUDES_DEFAULT])dnl -])# _LT_HEADER_DLFCN - - -# _LT_TRY_DLOPEN_SELF (ACTION-IF-TRUE, ACTION-IF-TRUE-W-USCORE, -# ACTION-IF-FALSE, ACTION-IF-CROSS-COMPILING) -# ---------------------------------------------------------------- -m4_defun([_LT_TRY_DLOPEN_SELF], -[m4_require([_LT_HEADER_DLFCN])dnl -if test "$cross_compiling" = yes; then : - [$4] -else - lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 - lt_status=$lt_dlunknown - cat > conftest.$ac_ext <<_LT_EOF -[#line __oline__ "configure" -#include "confdefs.h" - -#if HAVE_DLFCN_H -#include <dlfcn.h> -#endif - -#include <stdio.h> - -#ifdef RTLD_GLOBAL -# define LT_DLGLOBAL RTLD_GLOBAL -#else -# ifdef DL_GLOBAL -# define LT_DLGLOBAL DL_GLOBAL -# else -# define LT_DLGLOBAL 0 -# endif -#endif - -/* We may have to define LT_DLLAZY_OR_NOW in the command line if we - find out it does not work in some platform. */ -#ifndef LT_DLLAZY_OR_NOW -# ifdef RTLD_LAZY -# define LT_DLLAZY_OR_NOW RTLD_LAZY -# else -# ifdef DL_LAZY -# define LT_DLLAZY_OR_NOW DL_LAZY -# else -# ifdef RTLD_NOW -# define LT_DLLAZY_OR_NOW RTLD_NOW -# else -# ifdef DL_NOW -# define LT_DLLAZY_OR_NOW DL_NOW -# else -# define LT_DLLAZY_OR_NOW 0 -# endif -# endif -# endif -# endif -#endif - -void fnord() { int i=42;} -int main () -{ - void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW); - int status = $lt_dlunknown; - - if (self) - { - if (dlsym (self,"fnord")) status = $lt_dlno_uscore; - else if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore; - /* dlclose (self); */ - } - else - puts (dlerror ()); - - return status; -}] -_LT_EOF - if AC_TRY_EVAL(ac_link) && test -s conftest${ac_exeext} 2>/dev/null; then - (./conftest; exit; ) >&AS_MESSAGE_LOG_FD 2>/dev/null - lt_status=$? - case x$lt_status in - x$lt_dlno_uscore) $1 ;; - x$lt_dlneed_uscore) $2 ;; - x$lt_dlunknown|x*) $3 ;; - esac - else : - # compilation failed - $3 - fi -fi -rm -fr conftest* -])# _LT_TRY_DLOPEN_SELF - - -# LT_SYS_DLOPEN_SELF -# ------------------ -AC_DEFUN([LT_SYS_DLOPEN_SELF], -[m4_require([_LT_HEADER_DLFCN])dnl -if test "x$enable_dlopen" != xyes; then - enable_dlopen=unknown - enable_dlopen_self=unknown - enable_dlopen_self_static=unknown -else - lt_cv_dlopen=no - lt_cv_dlopen_libs= - - case $host_os in - beos*) - lt_cv_dlopen="load_add_on" - lt_cv_dlopen_libs= - lt_cv_dlopen_self=yes - ;; - - mingw* | pw32* | cegcc*) - lt_cv_dlopen="LoadLibrary" - lt_cv_dlopen_libs= - ;; - - cygwin*) - lt_cv_dlopen="dlopen" - lt_cv_dlopen_libs= - ;; - - darwin*) - # if libdl is installed we need to link against it - AC_CHECK_LIB([dl], [dlopen], - [lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"],[ - lt_cv_dlopen="dyld" - lt_cv_dlopen_libs= - lt_cv_dlopen_self=yes - ]) - ;; - - *) - AC_CHECK_FUNC([shl_load], - [lt_cv_dlopen="shl_load"], - [AC_CHECK_LIB([dld], [shl_load], - [lt_cv_dlopen="shl_load" lt_cv_dlopen_libs="-ldld"], - [AC_CHECK_FUNC([dlopen], - [lt_cv_dlopen="dlopen"], - [AC_CHECK_LIB([dl], [dlopen], - [lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"], - [AC_CHECK_LIB([svld], [dlopen], - [lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-lsvld"], - [AC_CHECK_LIB([dld], [dld_link], - [lt_cv_dlopen="dld_link" lt_cv_dlopen_libs="-ldld"]) - ]) - ]) - ]) - ]) - ]) - ;; - esac - - if test "x$lt_cv_dlopen" != xno; then - enable_dlopen=yes - else - enable_dlopen=no - fi - - case $lt_cv_dlopen in - dlopen) - save_CPPFLAGS="$CPPFLAGS" - test "x$ac_cv_header_dlfcn_h" = xyes && CPPFLAGS="$CPPFLAGS -DHAVE_DLFCN_H" - - save_LDFLAGS="$LDFLAGS" - wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $export_dynamic_flag_spec\" - - save_LIBS="$LIBS" - LIBS="$lt_cv_dlopen_libs $LIBS" - - AC_CACHE_CHECK([whether a program can dlopen itself], - lt_cv_dlopen_self, [dnl - _LT_TRY_DLOPEN_SELF( - lt_cv_dlopen_self=yes, lt_cv_dlopen_self=yes, - lt_cv_dlopen_self=no, lt_cv_dlopen_self=cross) - ]) - - if test "x$lt_cv_dlopen_self" = xyes; then - wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $lt_prog_compiler_static\" - AC_CACHE_CHECK([whether a statically linked program can dlopen itself], - lt_cv_dlopen_self_static, [dnl - _LT_TRY_DLOPEN_SELF( - lt_cv_dlopen_self_static=yes, lt_cv_dlopen_self_static=yes, - lt_cv_dlopen_self_static=no, lt_cv_dlopen_self_static=cross) - ]) - fi - - CPPFLAGS="$save_CPPFLAGS" - LDFLAGS="$save_LDFLAGS" - LIBS="$save_LIBS" - ;; - esac - - case $lt_cv_dlopen_self in - yes|no) enable_dlopen_self=$lt_cv_dlopen_self ;; - *) enable_dlopen_self=unknown ;; - esac - - case $lt_cv_dlopen_self_static in - yes|no) enable_dlopen_self_static=$lt_cv_dlopen_self_static ;; - *) enable_dlopen_self_static=unknown ;; - esac -fi -_LT_DECL([dlopen_support], [enable_dlopen], [0], - [Whether dlopen is supported]) -_LT_DECL([dlopen_self], [enable_dlopen_self], [0], - [Whether dlopen of programs is supported]) -_LT_DECL([dlopen_self_static], [enable_dlopen_self_static], [0], - [Whether dlopen of statically linked programs is supported]) -])# LT_SYS_DLOPEN_SELF - -# Old name: -AU_ALIAS([AC_LIBTOOL_DLOPEN_SELF], [LT_SYS_DLOPEN_SELF]) -dnl aclocal-1.4 backwards compatibility: -dnl AC_DEFUN([AC_LIBTOOL_DLOPEN_SELF], []) - - -# _LT_COMPILER_C_O([TAGNAME]) -# --------------------------- -# Check to see if options -c and -o are simultaneously supported by compiler. -# This macro does not hard code the compiler like AC_PROG_CC_C_O. -m4_defun([_LT_COMPILER_C_O], -[m4_require([_LT_DECL_SED])dnl -m4_require([_LT_FILEUTILS_DEFAULTS])dnl -m4_require([_LT_TAG_COMPILER])dnl -AC_CACHE_CHECK([if $compiler supports -c -o file.$ac_objext], - [_LT_TAGVAR(lt_cv_prog_compiler_c_o, $1)], - [_LT_TAGVAR(lt_cv_prog_compiler_c_o, $1)=no - $RM -r conftest 2>/dev/null - mkdir conftest - cd conftest - mkdir out - echo "$lt_simple_compile_test_code" > conftest.$ac_ext - - lt_compiler_flag="-o out/conftest2.$ac_objext" - # Insert the option either (1) after the last *FLAGS variable, or - # (2) before a word containing "conftest.", or (3) at the end. - # Note that $ac_compile itself does not contain backslashes and begins - # with a dollar sign (not a hyphen), so the echo should work correctly. - lt_compile=`echo "$ac_compile" | $SED \ - -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ - -e 's: [[^ ]]*conftest\.: $lt_compiler_flag&:; t' \ - -e 's:$: $lt_compiler_flag:'` - (eval echo "\"\$as_me:__oline__: $lt_compile\"" >&AS_MESSAGE_LOG_FD) - (eval "$lt_compile" 2>out/conftest.err) - ac_status=$? - cat out/conftest.err >&AS_MESSAGE_LOG_FD - echo "$as_me:__oline__: \$? = $ac_status" >&AS_MESSAGE_LOG_FD - if (exit $ac_status) && test -s out/conftest2.$ac_objext - then - # The compiler can only warn and ignore the option if not recognized - # So say no if there are warnings - $ECHO "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' > out/conftest.exp - $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2 - if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then - _LT_TAGVAR(lt_cv_prog_compiler_c_o, $1)=yes - fi - fi - chmod u+w . 2>&AS_MESSAGE_LOG_FD - $RM conftest* - # SGI C++ compiler will create directory out/ii_files/ for - # template instantiation - test -d out/ii_files && $RM out/ii_files/* && rmdir out/ii_files - $RM out/* && rmdir out - cd .. - $RM -r conftest - $RM conftest* -]) -_LT_TAGDECL([compiler_c_o], [lt_cv_prog_compiler_c_o], [1], - [Does compiler simultaneously support -c and -o options?]) -])# _LT_COMPILER_C_O - - -# _LT_COMPILER_FILE_LOCKS([TAGNAME]) -# ---------------------------------- -# Check to see if we can do hard links to lock some files if needed -m4_defun([_LT_COMPILER_FILE_LOCKS], -[m4_require([_LT_ENABLE_LOCK])dnl -m4_require([_LT_FILEUTILS_DEFAULTS])dnl -_LT_COMPILER_C_O([$1]) - -hard_links="nottested" -if test "$_LT_TAGVAR(lt_cv_prog_compiler_c_o, $1)" = no && test "$need_locks" != no; then - # do not overwrite the value of need_locks provided by the user - AC_MSG_CHECKING([if we can lock with hard links]) - hard_links=yes - $RM conftest* - ln conftest.a conftest.b 2>/dev/null && hard_links=no - touch conftest.a - ln conftest.a conftest.b 2>&5 || hard_links=no - ln conftest.a conftest.b 2>/dev/null && hard_links=no - AC_MSG_RESULT([$hard_links]) - if test "$hard_links" = no; then - AC_MSG_WARN([`$CC' does not support `-c -o', so `make -j' may be unsafe]) - need_locks=warn - fi -else - need_locks=no -fi -_LT_DECL([], [need_locks], [1], [Must we lock files when doing compilation?]) -])# _LT_COMPILER_FILE_LOCKS - - -# _LT_CHECK_OBJDIR -# ---------------- -m4_defun([_LT_CHECK_OBJDIR], -[AC_CACHE_CHECK([for objdir], [lt_cv_objdir], -[rm -f .libs 2>/dev/null -mkdir .libs 2>/dev/null -if test -d .libs; then - lt_cv_objdir=.libs -else - # MS-DOS does not allow filenames that begin with a dot. - lt_cv_objdir=_libs -fi -rmdir .libs 2>/dev/null]) -objdir=$lt_cv_objdir -_LT_DECL([], [objdir], [0], - [The name of the directory that contains temporary libtool files])dnl -m4_pattern_allow([LT_OBJDIR])dnl -AC_DEFINE_UNQUOTED(LT_OBJDIR, "$lt_cv_objdir/", - [Define to the sub-directory in which libtool stores uninstalled libraries.]) -])# _LT_CHECK_OBJDIR - - -# _LT_LINKER_HARDCODE_LIBPATH([TAGNAME]) -# -------------------------------------- -# Check hardcoding attributes. -m4_defun([_LT_LINKER_HARDCODE_LIBPATH], -[AC_MSG_CHECKING([how to hardcode library paths into programs]) -_LT_TAGVAR(hardcode_action, $1)= -if test -n "$_LT_TAGVAR(hardcode_libdir_flag_spec, $1)" || - test -n "$_LT_TAGVAR(runpath_var, $1)" || - test "X$_LT_TAGVAR(hardcode_automatic, $1)" = "Xyes" ; then - - # We can hardcode non-existent directories. - if test "$_LT_TAGVAR(hardcode_direct, $1)" != no && - # If the only mechanism to avoid hardcoding is shlibpath_var, we - # have to relink, otherwise we might link with an installed library - # when we should be linking with a yet-to-be-installed one - ## test "$_LT_TAGVAR(hardcode_shlibpath_var, $1)" != no && - test "$_LT_TAGVAR(hardcode_minus_L, $1)" != no; then - # Linking always hardcodes the temporary library directory. - _LT_TAGVAR(hardcode_action, $1)=relink - else - # We can link without hardcoding, and we can hardcode nonexisting dirs. - _LT_TAGVAR(hardcode_action, $1)=immediate - fi -else - # We cannot hardcode anything, or else we can only hardcode existing - # directories. - _LT_TAGVAR(hardcode_action, $1)=unsupported -fi -AC_MSG_RESULT([$_LT_TAGVAR(hardcode_action, $1)]) - -if test "$_LT_TAGVAR(hardcode_action, $1)" = relink || - test "$_LT_TAGVAR(inherit_rpath, $1)" = yes; then - # Fast installation is not supported - enable_fast_install=no -elif test "$shlibpath_overrides_runpath" = yes || - test "$enable_shared" = no; then - # Fast installation is not necessary - enable_fast_install=needless -fi -_LT_TAGDECL([], [hardcode_action], [0], - [How to hardcode a shared library path into an executable]) -])# _LT_LINKER_HARDCODE_LIBPATH - - -# _LT_CMD_STRIPLIB -# ---------------- -m4_defun([_LT_CMD_STRIPLIB], -[m4_require([_LT_DECL_EGREP]) -striplib= -old_striplib= -AC_MSG_CHECKING([whether stripping libraries is possible]) -if test -n "$STRIP" && $STRIP -V 2>&1 | $GREP "GNU strip" >/dev/null; then - test -z "$old_striplib" && old_striplib="$STRIP --strip-debug" - test -z "$striplib" && striplib="$STRIP --strip-unneeded" - AC_MSG_RESULT([yes]) -else -# FIXME - insert some real tests, host_os isn't really good enough - case $host_os in - darwin*) - if test -n "$STRIP" ; then - striplib="$STRIP -x" - old_striplib="$STRIP -S" - AC_MSG_RESULT([yes]) - else - AC_MSG_RESULT([no]) - fi - ;; - *) - AC_MSG_RESULT([no]) - ;; - esac -fi -_LT_DECL([], [old_striplib], [1], [Commands to strip libraries]) -_LT_DECL([], [striplib], [1]) -])# _LT_CMD_STRIPLIB - - -# _LT_SYS_DYNAMIC_LINKER([TAG]) -# ----------------------------- -# PORTME Fill in your ld.so characteristics -m4_defun([_LT_SYS_DYNAMIC_LINKER], -[AC_REQUIRE([AC_CANONICAL_HOST])dnl -m4_require([_LT_DECL_EGREP])dnl -m4_require([_LT_FILEUTILS_DEFAULTS])dnl -m4_require([_LT_DECL_OBJDUMP])dnl -m4_require([_LT_DECL_SED])dnl -AC_MSG_CHECKING([dynamic linker characteristics]) -m4_if([$1], - [], [ -if test "$GCC" = yes; then - case $host_os in - darwin*) lt_awk_arg="/^libraries:/,/LR/" ;; - *) lt_awk_arg="/^libraries:/" ;; - esac - lt_search_path_spec=`$CC -print-search-dirs | awk $lt_awk_arg | $SED -e "s/^libraries://" -e "s,=/,/,g"` - if $ECHO "$lt_search_path_spec" | $GREP ';' >/dev/null ; then - # if the path contains ";" then we assume it to be the separator - # otherwise default to the standard path separator (i.e. ":") - it is - # assumed that no part of a normal pathname contains ";" but that should - # okay in the real world where ";" in dirpaths is itself problematic. - lt_search_path_spec=`$ECHO "$lt_search_path_spec" | $SED -e 's/;/ /g'` - else - lt_search_path_spec=`$ECHO "$lt_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"` - fi - # Ok, now we have the path, separated by spaces, we can step through it - # and add multilib dir if necessary. - lt_tmp_lt_search_path_spec= - lt_multi_os_dir=`$CC $CPPFLAGS $CFLAGS $LDFLAGS -print-multi-os-directory 2>/dev/null` - for lt_sys_path in $lt_search_path_spec; do - if test -d "$lt_sys_path/$lt_multi_os_dir"; then - lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path/$lt_multi_os_dir" - else - test -d "$lt_sys_path" && \ - lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path" - fi - done - lt_search_path_spec=`$ECHO $lt_tmp_lt_search_path_spec | awk ' -BEGIN {RS=" "; FS="/|\n";} { - lt_foo=""; - lt_count=0; - for (lt_i = NF; lt_i > 0; lt_i--) { - if ($lt_i != "" && $lt_i != ".") { - if ($lt_i == "..") { - lt_count++; - } else { - if (lt_count == 0) { - lt_foo="/" $lt_i lt_foo; - } else { - lt_count--; - } - } - } - } - if (lt_foo != "") { lt_freq[[lt_foo]]++; } - if (lt_freq[[lt_foo]] == 1) { print lt_foo; } -}'` - sys_lib_search_path_spec=`$ECHO $lt_search_path_spec` -else - sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib" -fi]) -library_names_spec= -libname_spec='lib$name' -soname_spec= -shrext_cmds=".so" -postinstall_cmds= -postuninstall_cmds= -finish_cmds= -finish_eval= -shlibpath_var= -shlibpath_overrides_runpath=unknown -version_type=none -dynamic_linker="$host_os ld.so" -sys_lib_dlsearch_path_spec="/lib /usr/lib" -need_lib_prefix=unknown -hardcode_into_libs=no - -# when you set need_version to no, make sure it does not cause -set_version -# flags to be left without arguments -need_version=unknown - -case $host_os in -aix3*) - version_type=linux - library_names_spec='${libname}${release}${shared_ext}$versuffix $libname.a' - shlibpath_var=LIBPATH - - # AIX 3 has no versioning support, so we append a major version to the name. - soname_spec='${libname}${release}${shared_ext}$major' - ;; - -aix[[4-9]]*) - version_type=linux - need_lib_prefix=no - need_version=no - hardcode_into_libs=yes - if test "$host_cpu" = ia64; then - # AIX 5 supports IA64 - library_names_spec='${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext}$versuffix $libname${shared_ext}' - shlibpath_var=LD_LIBRARY_PATH - else - # With GCC up to 2.95.x, collect2 would create an import file - # for dependence libraries. The import file would start with - # the line `#! .'. This would cause the generated library to - # depend on `.', always an invalid library. This was fixed in - # development snapshots of GCC prior to 3.0. - case $host_os in - aix4 | aix4.[[01]] | aix4.[[01]].*) - if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)' - echo ' yes ' - echo '#endif'; } | ${CC} -E - | $GREP yes > /dev/null; then - : - else - can_build_shared=no - fi - ;; - esac - # AIX (on Power*) has no versioning support, so currently we can not hardcode correct - # soname into executable. Probably we can add versioning support to - # collect2, so additional links can be useful in future. - if test "$aix_use_runtimelinking" = yes; then - # If using run time linking (on AIX 4.2 or later) use lib<name>.so - # instead of lib<name>.a to let people know that these are not - # typical AIX shared libraries. - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - else - # We preserve .a as extension for shared libraries through AIX4.2 - # and later when we are not doing run time linking. - library_names_spec='${libname}${release}.a $libname.a' - soname_spec='${libname}${release}${shared_ext}$major' - fi - shlibpath_var=LIBPATH - fi - ;; - -amigaos*) - case $host_cpu in - powerpc) - # Since July 2007 AmigaOS4 officially supports .so libraries. - # When compiling the executable, add -use-dynld -Lsobjs: to the compileline. - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - ;; - m68k) - library_names_spec='$libname.ixlibrary $libname.a' - # Create ${libname}_ixlibrary.a entries in /sys/libs. - finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`$ECHO "X$lib" | $Xsed -e '\''s%^.*/\([[^/]]*\)\.ixlibrary$%\1%'\''`; test $RM /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done' - ;; - esac - ;; - -beos*) - library_names_spec='${libname}${shared_ext}' - dynamic_linker="$host_os ld.so" - shlibpath_var=LIBRARY_PATH - ;; - -bsdi[[45]]*) - version_type=linux - need_version=no - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - finish_cmds='PATH="\$PATH:/sbin" ldconfig $libdir' - shlibpath_var=LD_LIBRARY_PATH - sys_lib_search_path_spec="/shlib /usr/lib /usr/X11/lib /usr/contrib/lib /lib /usr/local/lib" - sys_lib_dlsearch_path_spec="/shlib /usr/lib /usr/local/lib" - # the default ld.so.conf also contains /usr/contrib/lib and - # /usr/X11R6/lib (/usr/X11 is a link to /usr/X11R6), but let us allow - # libtool to hard-code these into programs - ;; - -cygwin* | mingw* | pw32* | cegcc*) - version_type=windows - shrext_cmds=".dll" - need_version=no - need_lib_prefix=no - - case $GCC,$host_os in - yes,cygwin* | yes,mingw* | yes,pw32* | yes,cegcc*) - library_names_spec='$libname.dll.a' - # DLL is installed to $(libdir)/../bin by postinstall_cmds - postinstall_cmds='base_file=`basename \${file}`~ - dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i; echo \$dlname'\''`~ - dldir=$destdir/`dirname \$dlpath`~ - test -d \$dldir || mkdir -p \$dldir~ - $install_prog $dir/$dlname \$dldir/$dlname~ - chmod a+x \$dldir/$dlname~ - if test -n '\''$stripme'\'' && test -n '\''$striplib'\''; then - eval '\''$striplib \$dldir/$dlname'\'' || exit \$?; - fi' - postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~ - dlpath=$dir/\$dldll~ - $RM \$dlpath' - shlibpath_overrides_runpath=yes - - case $host_os in - cygwin*) - # Cygwin DLLs use 'cyg' prefix rather than 'lib' - soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}' - sys_lib_search_path_spec="/usr/lib /lib/w32api /lib /usr/local/lib" - ;; - mingw* | cegcc*) - # MinGW DLLs use traditional 'lib' prefix - soname_spec='${libname}`echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}' - sys_lib_search_path_spec=`$CC -print-search-dirs | $GREP "^libraries:" | $SED -e "s/^libraries://" -e "s,=/,/,g"` - if $ECHO "$sys_lib_search_path_spec" | [$GREP ';[c-zC-Z]:/' >/dev/null]; then - # It is most probably a Windows format PATH printed by - # mingw gcc, but we are running on Cygwin. Gcc prints its search - # path with ; separators, and with drive letters. We can handle the - # drive letters (cygwin fileutils understands them), so leave them, - # especially as we might pass files found there to a mingw objdump, - # which wouldn't understand a cygwinified path. Ahh. - sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'` - else - sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"` - fi - ;; - pw32*) - # pw32 DLLs use 'pw' prefix rather than 'lib' - library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}' - ;; - esac - ;; - - *) - library_names_spec='${libname}`echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext} $libname.lib' - ;; - esac - dynamic_linker='Win32 ld.exe' - # FIXME: first we should search . and the directory the executable is in - shlibpath_var=PATH - ;; - -darwin* | rhapsody*) - dynamic_linker="$host_os dyld" - version_type=darwin - need_lib_prefix=no - need_version=no - library_names_spec='${libname}${release}${major}$shared_ext ${libname}$shared_ext' - soname_spec='${libname}${release}${major}$shared_ext' - shlibpath_overrides_runpath=yes - shlibpath_var=DYLD_LIBRARY_PATH - shrext_cmds='`test .$module = .yes && echo .so || echo .dylib`' -m4_if([$1], [],[ - sys_lib_search_path_spec="$sys_lib_search_path_spec /usr/local/lib"]) - sys_lib_dlsearch_path_spec='/usr/local/lib /lib /usr/lib' - ;; - -dgux*) - version_type=linux - need_lib_prefix=no - need_version=no - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname$shared_ext' - soname_spec='${libname}${release}${shared_ext}$major' - shlibpath_var=LD_LIBRARY_PATH - ;; - -freebsd1*) - dynamic_linker=no - ;; - -freebsd* | dragonfly*) - # DragonFly does not have aout. When/if they implement a new - # versioning mechanism, adjust this. - if test -x /usr/bin/objformat; then - objformat=`/usr/bin/objformat` - else - case $host_os in - freebsd[[123]]*) objformat=aout ;; - *) objformat=elf ;; - esac - fi - version_type=freebsd-$objformat - case $version_type in - freebsd-elf*) - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}' - need_version=no - need_lib_prefix=no - ;; - freebsd-*) - library_names_spec='${libname}${release}${shared_ext}$versuffix $libname${shared_ext}$versuffix' - need_version=yes - ;; - esac - shlibpath_var=LD_LIBRARY_PATH - case $host_os in - freebsd2*) - shlibpath_overrides_runpath=yes - ;; - freebsd3.[[01]]* | freebsdelf3.[[01]]*) - shlibpath_overrides_runpath=yes - hardcode_into_libs=yes - ;; - freebsd3.[[2-9]]* | freebsdelf3.[[2-9]]* | \ - freebsd4.[[0-5]] | freebsdelf4.[[0-5]] | freebsd4.1.1 | freebsdelf4.1.1) - shlibpath_overrides_runpath=no - hardcode_into_libs=yes - ;; - *) # from 4.6 on, and DragonFly - shlibpath_overrides_runpath=yes - hardcode_into_libs=yes - ;; - esac - ;; - -gnu*) - version_type=linux - need_lib_prefix=no - need_version=no - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - shlibpath_var=LD_LIBRARY_PATH - hardcode_into_libs=yes - ;; - -hpux9* | hpux10* | hpux11*) - # Give a soname corresponding to the major version so that dld.sl refuses to - # link against other versions. - version_type=sunos - need_lib_prefix=no - need_version=no - case $host_cpu in - ia64*) - shrext_cmds='.so' - hardcode_into_libs=yes - dynamic_linker="$host_os dld.so" - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=yes # Unless +noenvvar is specified. - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - if test "X$HPUX_IA64_MODE" = X32; then - sys_lib_search_path_spec="/usr/lib/hpux32 /usr/local/lib/hpux32 /usr/local/lib" - else - sys_lib_search_path_spec="/usr/lib/hpux64 /usr/local/lib/hpux64" - fi - sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec - ;; - hppa*64*) - shrext_cmds='.sl' - hardcode_into_libs=yes - dynamic_linker="$host_os dld.sl" - shlibpath_var=LD_LIBRARY_PATH # How should we handle SHLIB_PATH - shlibpath_overrides_runpath=yes # Unless +noenvvar is specified. - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - sys_lib_search_path_spec="/usr/lib/pa20_64 /usr/ccs/lib/pa20_64" - sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec - ;; - *) - shrext_cmds='.sl' - dynamic_linker="$host_os dld.sl" - shlibpath_var=SHLIB_PATH - shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - ;; - esac - # HP-UX runs *really* slowly unless shared libraries are mode 555. - postinstall_cmds='chmod 555 $lib' - ;; - -interix[[3-9]]*) - version_type=linux - need_lib_prefix=no - need_version=no - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - dynamic_linker='Interix 3.x ld.so.1 (PE, like ELF)' - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=no - hardcode_into_libs=yes - ;; - -irix5* | irix6* | nonstopux*) - case $host_os in - nonstopux*) version_type=nonstopux ;; - *) - if test "$lt_cv_prog_gnu_ld" = yes; then - version_type=linux - else - version_type=irix - fi ;; - esac - need_lib_prefix=no - need_version=no - soname_spec='${libname}${release}${shared_ext}$major' - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext} $libname${shared_ext}' - case $host_os in - irix5* | nonstopux*) - libsuff= shlibsuff= - ;; - *) - case $LD in # libtool.m4 will add one of these switches to LD - *-32|*"-32 "|*-melf32bsmip|*"-melf32bsmip ") - libsuff= shlibsuff= libmagic=32-bit;; - *-n32|*"-n32 "|*-melf32bmipn32|*"-melf32bmipn32 ") - libsuff=32 shlibsuff=N32 libmagic=N32;; - *-64|*"-64 "|*-melf64bmip|*"-melf64bmip ") - libsuff=64 shlibsuff=64 libmagic=64-bit;; - *) libsuff= shlibsuff= libmagic=never-match;; - esac - ;; - esac - shlibpath_var=LD_LIBRARY${shlibsuff}_PATH - shlibpath_overrides_runpath=no - sys_lib_search_path_spec="/usr/lib${libsuff} /lib${libsuff} /usr/local/lib${libsuff}" - sys_lib_dlsearch_path_spec="/usr/lib${libsuff} /lib${libsuff}" - hardcode_into_libs=yes - ;; - -# No shared lib support for Linux oldld, aout, or coff. -linux*oldld* | linux*aout* | linux*coff*) - dynamic_linker=no - ;; - -# This must be Linux ELF. -linux* | k*bsd*-gnu) - version_type=linux - need_lib_prefix=no - need_version=no - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir' - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=no - # Some binutils ld are patched to set DT_RUNPATH - save_LDFLAGS=$LDFLAGS - save_libdir=$libdir - eval "libdir=/foo; wl=\"$_LT_TAGVAR(lt_prog_compiler_wl, $1)\"; \ - LDFLAGS=\"\$LDFLAGS $_LT_TAGVAR(hardcode_libdir_flag_spec, $1)\"" - AC_LINK_IFELSE([AC_LANG_PROGRAM([],[])], - [AS_IF([ ($OBJDUMP -p conftest$ac_exeext) 2>/dev/null | grep "RUNPATH.*$libdir" >/dev/null], - [shlibpath_overrides_runpath=yes])]) - LDFLAGS=$save_LDFLAGS - libdir=$save_libdir - - # This implies no fast_install, which is unacceptable. - # Some rework will be needed to allow for fast_install - # before this can be enabled. - hardcode_into_libs=yes - - # Add ABI-specific directories to the system library path. - sys_lib_dlsearch_path_spec="/lib64 /usr/lib64 /lib /usr/lib" - - # Append ld.so.conf contents to the search path - if test -f /etc/ld.so.conf; then - lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s 2>/dev/null", \[$]2)); skip = 1; } { if (!skip) print \[$]0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;/^[ ]*hwcap[ ]/d;s/[:, ]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;/^$/d' | tr '\n' ' '` - sys_lib_dlsearch_path_spec="$sys_lib_dlsearch_path_spec $lt_ld_extra" - fi - - # We used to test for /lib/ld.so.1 and disable shared libraries on - # powerpc, because MkLinux only supported shared libraries with the - # GNU dynamic linker. Since this was broken with cross compilers, - # most powerpc-linux boxes support dynamic linking these days and - # people can always --disable-shared, the test was removed, and we - # assume the GNU/Linux dynamic linker is in use. - dynamic_linker='GNU/Linux ld.so' - ;; - -netbsd*) - version_type=sunos - need_lib_prefix=no - need_version=no - if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' - finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir' - dynamic_linker='NetBSD (a.out) ld.so' - else - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - dynamic_linker='NetBSD ld.elf_so' - fi - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=yes - hardcode_into_libs=yes - ;; - -newsos6) - version_type=linux - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=yes - ;; - -*nto* | *qnx*) - version_type=qnx - need_lib_prefix=no - need_version=no - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=no - hardcode_into_libs=yes - dynamic_linker='ldqnx.so' - ;; - -openbsd*) - version_type=sunos - sys_lib_dlsearch_path_spec="/usr/lib" - need_lib_prefix=no - # Some older versions of OpenBSD (3.3 at least) *do* need versioned libs. - case $host_os in - openbsd3.3 | openbsd3.3.*) need_version=yes ;; - *) need_version=no ;; - esac - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' - finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir' - shlibpath_var=LD_LIBRARY_PATH - if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then - case $host_os in - openbsd2.[[89]] | openbsd2.[[89]].*) - shlibpath_overrides_runpath=no - ;; - *) - shlibpath_overrides_runpath=yes - ;; - esac - else - shlibpath_overrides_runpath=yes - fi - ;; - -os2*) - libname_spec='$name' - shrext_cmds=".dll" - need_lib_prefix=no - library_names_spec='$libname${shared_ext} $libname.a' - dynamic_linker='OS/2 ld.exe' - shlibpath_var=LIBPATH - ;; - -osf3* | osf4* | osf5*) - version_type=osf - need_lib_prefix=no - need_version=no - soname_spec='${libname}${release}${shared_ext}$major' - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - shlibpath_var=LD_LIBRARY_PATH - sys_lib_search_path_spec="/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib" - sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec" - ;; - -rdos*) - dynamic_linker=no - ;; - -solaris*) - version_type=linux - need_lib_prefix=no - need_version=no - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=yes - hardcode_into_libs=yes - # ldd complains unless libraries are executable - postinstall_cmds='chmod +x $lib' - ;; - -sunos4*) - version_type=sunos - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' - finish_cmds='PATH="\$PATH:/usr/etc" ldconfig $libdir' - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=yes - if test "$with_gnu_ld" = yes; then - need_lib_prefix=no - fi - need_version=yes - ;; - -sysv4 | sysv4.3*) - version_type=linux - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - shlibpath_var=LD_LIBRARY_PATH - case $host_vendor in - sni) - shlibpath_overrides_runpath=no - need_lib_prefix=no - runpath_var=LD_RUN_PATH - ;; - siemens) - need_lib_prefix=no - ;; - motorola) - need_lib_prefix=no - need_version=no - shlibpath_overrides_runpath=no - sys_lib_search_path_spec='/lib /usr/lib /usr/ccs/lib' - ;; - esac - ;; - -sysv4*MP*) - if test -d /usr/nec ;then - version_type=linux - library_names_spec='$libname${shared_ext}.$versuffix $libname${shared_ext}.$major $libname${shared_ext}' - soname_spec='$libname${shared_ext}.$major' - shlibpath_var=LD_LIBRARY_PATH - fi - ;; - -sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*) - version_type=freebsd-elf - need_lib_prefix=no - need_version=no - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=yes - hardcode_into_libs=yes - if test "$with_gnu_ld" = yes; then - sys_lib_search_path_spec='/usr/local/lib /usr/gnu/lib /usr/ccs/lib /usr/lib /lib' - else - sys_lib_search_path_spec='/usr/ccs/lib /usr/lib' - case $host_os in - sco3.2v5*) - sys_lib_search_path_spec="$sys_lib_search_path_spec /lib" - ;; - esac - fi - sys_lib_dlsearch_path_spec='/usr/lib' - ;; - -tpf*) - # TPF is a cross-target only. Preferred cross-host = GNU/Linux. - version_type=linux - need_lib_prefix=no - need_version=no - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=no - hardcode_into_libs=yes - ;; - -uts4*) - version_type=linux - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - shlibpath_var=LD_LIBRARY_PATH - ;; - -*) - dynamic_linker=no - ;; -esac -AC_MSG_RESULT([$dynamic_linker]) -test "$dynamic_linker" = no && can_build_shared=no - -variables_saved_for_relink="PATH $shlibpath_var $runpath_var" -if test "$GCC" = yes; then - variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH" -fi - -if test "${lt_cv_sys_lib_search_path_spec+set}" = set; then - sys_lib_search_path_spec="$lt_cv_sys_lib_search_path_spec" -fi -if test "${lt_cv_sys_lib_dlsearch_path_spec+set}" = set; then - sys_lib_dlsearch_path_spec="$lt_cv_sys_lib_dlsearch_path_spec" -fi - -_LT_DECL([], [variables_saved_for_relink], [1], - [Variables whose values should be saved in libtool wrapper scripts and - restored at link time]) -_LT_DECL([], [need_lib_prefix], [0], - [Do we need the "lib" prefix for modules?]) -_LT_DECL([], [need_version], [0], [Do we need a version for libraries?]) -_LT_DECL([], [version_type], [0], [Library versioning type]) -_LT_DECL([], [runpath_var], [0], [Shared library runtime path variable]) -_LT_DECL([], [shlibpath_var], [0],[Shared library path variable]) -_LT_DECL([], [shlibpath_overrides_runpath], [0], - [Is shlibpath searched before the hard-coded library search path?]) -_LT_DECL([], [libname_spec], [1], [Format of library name prefix]) -_LT_DECL([], [library_names_spec], [1], - [[List of archive names. First name is the real one, the rest are links. - The last name is the one that the linker finds with -lNAME]]) -_LT_DECL([], [soname_spec], [1], - [[The coded name of the library, if different from the real name]]) -_LT_DECL([], [postinstall_cmds], [2], - [Command to use after installation of a shared archive]) -_LT_DECL([], [postuninstall_cmds], [2], - [Command to use after uninstallation of a shared archive]) -_LT_DECL([], [finish_cmds], [2], - [Commands used to finish a libtool library installation in a directory]) -_LT_DECL([], [finish_eval], [1], - [[As "finish_cmds", except a single script fragment to be evaled but - not shown]]) -_LT_DECL([], [hardcode_into_libs], [0], - [Whether we should hardcode library paths into libraries]) -_LT_DECL([], [sys_lib_search_path_spec], [2], - [Compile-time system search path for libraries]) -_LT_DECL([], [sys_lib_dlsearch_path_spec], [2], - [Run-time system search path for libraries]) -])# _LT_SYS_DYNAMIC_LINKER - - -# _LT_PATH_TOOL_PREFIX(TOOL) -# -------------------------- -# find a file program which can recognize shared library -AC_DEFUN([_LT_PATH_TOOL_PREFIX], -[m4_require([_LT_DECL_EGREP])dnl -AC_MSG_CHECKING([for $1]) -AC_CACHE_VAL(lt_cv_path_MAGIC_CMD, -[case $MAGIC_CMD in -[[\\/*] | ?:[\\/]*]) - lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path. - ;; -*) - lt_save_MAGIC_CMD="$MAGIC_CMD" - lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR -dnl $ac_dummy forces splitting on constant user-supplied paths. -dnl POSIX.2 word splitting is done only on the output of word expansions, -dnl not every word. This closes a longstanding sh security hole. - ac_dummy="m4_if([$2], , $PATH, [$2])" - for ac_dir in $ac_dummy; do - IFS="$lt_save_ifs" - test -z "$ac_dir" && ac_dir=. - if test -f $ac_dir/$1; then - lt_cv_path_MAGIC_CMD="$ac_dir/$1" - if test -n "$file_magic_test_file"; then - case $deplibs_check_method in - "file_magic "*) - file_magic_regex=`expr "$deplibs_check_method" : "file_magic \(.*\)"` - MAGIC_CMD="$lt_cv_path_MAGIC_CMD" - if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null | - $EGREP "$file_magic_regex" > /dev/null; then - : - else - cat <<_LT_EOF 1>&2 - -*** Warning: the command libtool uses to detect shared libraries, -*** $file_magic_cmd, produces output that libtool cannot recognize. -*** The result is that libtool may fail to recognize shared libraries -*** as such. This will affect the creation of libtool libraries that -*** depend on shared libraries, but programs linked with such libtool -*** libraries will work regardless of this problem. Nevertheless, you -*** may want to report the problem to your system manager and/or to -*** bug-libtool@gnu.org - -_LT_EOF - fi ;; - esac - fi - break - fi - done - IFS="$lt_save_ifs" - MAGIC_CMD="$lt_save_MAGIC_CMD" - ;; -esac]) -MAGIC_CMD="$lt_cv_path_MAGIC_CMD" -if test -n "$MAGIC_CMD"; then - AC_MSG_RESULT($MAGIC_CMD) -else - AC_MSG_RESULT(no) -fi -_LT_DECL([], [MAGIC_CMD], [0], - [Used to examine libraries when file_magic_cmd begins with "file"])dnl -])# _LT_PATH_TOOL_PREFIX - -# Old name: -AU_ALIAS([AC_PATH_TOOL_PREFIX], [_LT_PATH_TOOL_PREFIX]) -dnl aclocal-1.4 backwards compatibility: -dnl AC_DEFUN([AC_PATH_TOOL_PREFIX], []) - - -# _LT_PATH_MAGIC -# -------------- -# find a file program which can recognize a shared library -m4_defun([_LT_PATH_MAGIC], -[_LT_PATH_TOOL_PREFIX(${ac_tool_prefix}file, /usr/bin$PATH_SEPARATOR$PATH) -if test -z "$lt_cv_path_MAGIC_CMD"; then - if test -n "$ac_tool_prefix"; then - _LT_PATH_TOOL_PREFIX(file, /usr/bin$PATH_SEPARATOR$PATH) - else - MAGIC_CMD=: - fi -fi -])# _LT_PATH_MAGIC - - -# LT_PATH_LD -# ---------- -# find the pathname to the GNU or non-GNU linker -AC_DEFUN([LT_PATH_LD], -[AC_REQUIRE([AC_PROG_CC])dnl -AC_REQUIRE([AC_CANONICAL_HOST])dnl -AC_REQUIRE([AC_CANONICAL_BUILD])dnl -m4_require([_LT_DECL_SED])dnl -m4_require([_LT_DECL_EGREP])dnl - -AC_ARG_WITH([gnu-ld], - [AS_HELP_STRING([--with-gnu-ld], - [assume the C compiler uses GNU ld @<:@default=no@:>@])], - [test "$withval" = no || with_gnu_ld=yes], - [with_gnu_ld=no])dnl - -ac_prog=ld -if test "$GCC" = yes; then - # Check if gcc -print-prog-name=ld gives a path. - AC_MSG_CHECKING([for ld used by $CC]) - case $host in - *-*-mingw*) - # gcc leaves a trailing carriage return which upsets mingw - ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;; - *) - ac_prog=`($CC -print-prog-name=ld) 2>&5` ;; - esac - case $ac_prog in - # Accept absolute paths. - [[\\/]]* | ?:[[\\/]]*) - re_direlt='/[[^/]][[^/]]*/\.\./' - # Canonicalize the pathname of ld - ac_prog=`$ECHO "$ac_prog"| $SED 's%\\\\%/%g'` - while $ECHO "$ac_prog" | $GREP "$re_direlt" > /dev/null 2>&1; do - ac_prog=`$ECHO $ac_prog| $SED "s%$re_direlt%/%"` - done - test -z "$LD" && LD="$ac_prog" - ;; - "") - # If it fails, then pretend we aren't using GCC. - ac_prog=ld - ;; - *) - # If it is relative, then search for the first ld in PATH. - with_gnu_ld=unknown - ;; - esac -elif test "$with_gnu_ld" = yes; then - AC_MSG_CHECKING([for GNU ld]) -else - AC_MSG_CHECKING([for non-GNU ld]) -fi -AC_CACHE_VAL(lt_cv_path_LD, -[if test -z "$LD"; then - lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR - for ac_dir in $PATH; do - IFS="$lt_save_ifs" - test -z "$ac_dir" && ac_dir=. - if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then - lt_cv_path_LD="$ac_dir/$ac_prog" - # Check to see if the program is GNU ld. I'd rather use --version, - # but apparently some variants of GNU ld only accept -v. - # Break only if it was the GNU/non-GNU ld that we prefer. - case `"$lt_cv_path_LD" -v 2>&1 </dev/null` in - *GNU* | *'with BFD'*) - test "$with_gnu_ld" != no && break - ;; - *) - test "$with_gnu_ld" != yes && break - ;; - esac - fi - done - IFS="$lt_save_ifs" -else - lt_cv_path_LD="$LD" # Let the user override the test with a path. -fi]) -LD="$lt_cv_path_LD" -if test -n "$LD"; then - AC_MSG_RESULT($LD) -else - AC_MSG_RESULT(no) -fi -test -z "$LD" && AC_MSG_ERROR([no acceptable ld found in \$PATH]) -_LT_PATH_LD_GNU -AC_SUBST([LD]) - -_LT_TAGDECL([], [LD], [1], [The linker used to build libraries]) -])# LT_PATH_LD - -# Old names: -AU_ALIAS([AM_PROG_LD], [LT_PATH_LD]) -AU_ALIAS([AC_PROG_LD], [LT_PATH_LD]) -dnl aclocal-1.4 backwards compatibility: -dnl AC_DEFUN([AM_PROG_LD], []) -dnl AC_DEFUN([AC_PROG_LD], []) - - -# _LT_PATH_LD_GNU -#- -------------- -m4_defun([_LT_PATH_LD_GNU], -[AC_CACHE_CHECK([if the linker ($LD) is GNU ld], lt_cv_prog_gnu_ld, -[# I'd rather use --version here, but apparently some GNU lds only accept -v. -case `$LD -v 2>&1 </dev/null` in -*GNU* | *'with BFD'*) - lt_cv_prog_gnu_ld=yes - ;; -*) - lt_cv_prog_gnu_ld=no - ;; -esac]) -with_gnu_ld=$lt_cv_prog_gnu_ld -])# _LT_PATH_LD_GNU - - -# _LT_CMD_RELOAD -# -------------- -# find reload flag for linker -# -- PORTME Some linkers may need a different reload flag. -m4_defun([_LT_CMD_RELOAD], -[AC_CACHE_CHECK([for $LD option to reload object files], - lt_cv_ld_reload_flag, - [lt_cv_ld_reload_flag='-r']) -reload_flag=$lt_cv_ld_reload_flag -case $reload_flag in -"" | " "*) ;; -*) reload_flag=" $reload_flag" ;; -esac -reload_cmds='$LD$reload_flag -o $output$reload_objs' -case $host_os in - darwin*) - if test "$GCC" = yes; then - reload_cmds='$LTCC $LTCFLAGS -nostdlib ${wl}-r -o $output$reload_objs' - else - reload_cmds='$LD$reload_flag -o $output$reload_objs' - fi - ;; -esac -_LT_DECL([], [reload_flag], [1], [How to create reloadable object files])dnl -_LT_DECL([], [reload_cmds], [2])dnl -])# _LT_CMD_RELOAD - - -# _LT_CHECK_MAGIC_METHOD -# ---------------------- -# how to check for library dependencies -# -- PORTME fill in with the dynamic library characteristics -m4_defun([_LT_CHECK_MAGIC_METHOD], -[m4_require([_LT_DECL_EGREP]) -m4_require([_LT_DECL_OBJDUMP]) -AC_CACHE_CHECK([how to recognize dependent libraries], -lt_cv_deplibs_check_method, -[lt_cv_file_magic_cmd='$MAGIC_CMD' -lt_cv_file_magic_test_file= -lt_cv_deplibs_check_method='unknown' -# Need to set the preceding variable on all platforms that support -# interlibrary dependencies. -# 'none' -- dependencies not supported. -# `unknown' -- same as none, but documents that we really don't know. -# 'pass_all' -- all dependencies passed with no checks. -# 'test_compile' -- check by making test program. -# 'file_magic [[regex]]' -- check by looking for files in library path -# which responds to the $file_magic_cmd with a given extended regex. -# If you have `file' or equivalent on your system and you're not sure -# whether `pass_all' will *always* work, you probably want this one. - -case $host_os in -aix[[4-9]]*) - lt_cv_deplibs_check_method=pass_all - ;; - -beos*) - lt_cv_deplibs_check_method=pass_all - ;; - -bsdi[[45]]*) - lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[ML]]SB (shared object|dynamic lib)' - lt_cv_file_magic_cmd='/usr/bin/file -L' - lt_cv_file_magic_test_file=/shlib/libc.so - ;; - -cygwin*) - # func_win32_libid is a shell function defined in ltmain.sh - lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL' - lt_cv_file_magic_cmd='func_win32_libid' - ;; - -mingw* | pw32*) - # Base MSYS/MinGW do not provide the 'file' command needed by - # func_win32_libid shell function, so use a weaker test based on 'objdump', - # unless we find 'file', for example because we are cross-compiling. - if ( file / ) >/dev/null 2>&1; then - lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL' - lt_cv_file_magic_cmd='func_win32_libid' - else - lt_cv_deplibs_check_method='file_magic file format pei*-i386(.*architecture: i386)?' - lt_cv_file_magic_cmd='$OBJDUMP -f' - fi - ;; - -cegcc) - # use the weaker test based on 'objdump'. See mingw*. - lt_cv_deplibs_check_method='file_magic file format pe-arm-.*little(.*architecture: arm)?' - lt_cv_file_magic_cmd='$OBJDUMP -f' - ;; - -darwin* | rhapsody*) - lt_cv_deplibs_check_method=pass_all - ;; - -freebsd* | dragonfly*) - if echo __ELF__ | $CC -E - | $GREP __ELF__ > /dev/null; then - case $host_cpu in - i*86 ) - # Not sure whether the presence of OpenBSD here was a mistake. - # Let's accept both of them until this is cleared up. - lt_cv_deplibs_check_method='file_magic (FreeBSD|OpenBSD|DragonFly)/i[[3-9]]86 (compact )?demand paged shared library' - lt_cv_file_magic_cmd=/usr/bin/file - lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*` - ;; - esac - else - lt_cv_deplibs_check_method=pass_all - fi - ;; - -gnu*) - lt_cv_deplibs_check_method=pass_all - ;; - -hpux10.20* | hpux11*) - lt_cv_file_magic_cmd=/usr/bin/file - case $host_cpu in - ia64*) - lt_cv_deplibs_check_method='file_magic (s[[0-9]][[0-9]][[0-9]]|ELF-[[0-9]][[0-9]]) shared object file - IA64' - lt_cv_file_magic_test_file=/usr/lib/hpux32/libc.so - ;; - hppa*64*) - [lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|ELF-[0-9][0-9]) shared object file - PA-RISC [0-9].[0-9]'] - lt_cv_file_magic_test_file=/usr/lib/pa20_64/libc.sl - ;; - *) - lt_cv_deplibs_check_method='file_magic (s[[0-9]][[0-9]][[0-9]]|PA-RISC[[0-9]].[[0-9]]) shared library' - lt_cv_file_magic_test_file=/usr/lib/libc.sl - ;; - esac - ;; - -interix[[3-9]]*) - # PIC code is broken on Interix 3.x, that's why |\.a not |_pic\.a here - lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so|\.a)$' - ;; - -irix5* | irix6* | nonstopux*) - case $LD in - *-32|*"-32 ") libmagic=32-bit;; - *-n32|*"-n32 ") libmagic=N32;; - *-64|*"-64 ") libmagic=64-bit;; - *) libmagic=never-match;; - esac - lt_cv_deplibs_check_method=pass_all - ;; - -# This must be Linux ELF. -linux* | k*bsd*-gnu) - lt_cv_deplibs_check_method=pass_all - ;; - -netbsd*) - if echo __ELF__ | $CC -E - | $GREP __ELF__ > /dev/null; then - lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so\.[[0-9]]+\.[[0-9]]+|_pic\.a)$' - else - lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so|_pic\.a)$' - fi - ;; - -newos6*) - lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[ML]]SB (executable|dynamic lib)' - lt_cv_file_magic_cmd=/usr/bin/file - lt_cv_file_magic_test_file=/usr/lib/libnls.so - ;; - -*nto* | *qnx*) - lt_cv_deplibs_check_method=pass_all - ;; - -openbsd*) - if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then - lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so\.[[0-9]]+\.[[0-9]]+|\.so|_pic\.a)$' - else - lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so\.[[0-9]]+\.[[0-9]]+|_pic\.a)$' - fi - ;; - -osf3* | osf4* | osf5*) - lt_cv_deplibs_check_method=pass_all - ;; - -rdos*) - lt_cv_deplibs_check_method=pass_all - ;; - -solaris*) - lt_cv_deplibs_check_method=pass_all - ;; - -sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*) - lt_cv_deplibs_check_method=pass_all - ;; - -sysv4 | sysv4.3*) - case $host_vendor in - motorola) - lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[ML]]SB (shared object|dynamic lib) M[[0-9]][[0-9]]* Version [[0-9]]' - lt_cv_file_magic_test_file=`echo /usr/lib/libc.so*` - ;; - ncr) - lt_cv_deplibs_check_method=pass_all - ;; - sequent) - lt_cv_file_magic_cmd='/bin/file' - lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[LM]]SB (shared object|dynamic lib )' - ;; - sni) - lt_cv_file_magic_cmd='/bin/file' - lt_cv_deplibs_check_method="file_magic ELF [[0-9]][[0-9]]*-bit [[LM]]SB dynamic lib" - lt_cv_file_magic_test_file=/lib/libc.so - ;; - siemens) - lt_cv_deplibs_check_method=pass_all - ;; - pc) - lt_cv_deplibs_check_method=pass_all - ;; - esac - ;; - -tpf*) - lt_cv_deplibs_check_method=pass_all - ;; -esac -]) -file_magic_cmd=$lt_cv_file_magic_cmd -deplibs_check_method=$lt_cv_deplibs_check_method -test -z "$deplibs_check_method" && deplibs_check_method=unknown - -_LT_DECL([], [deplibs_check_method], [1], - [Method to check whether dependent libraries are shared objects]) -_LT_DECL([], [file_magic_cmd], [1], - [Command to use when deplibs_check_method == "file_magic"]) -])# _LT_CHECK_MAGIC_METHOD - - -# LT_PATH_NM -# ---------- -# find the pathname to a BSD- or MS-compatible name lister -AC_DEFUN([LT_PATH_NM], -[AC_REQUIRE([AC_PROG_CC])dnl -AC_CACHE_CHECK([for BSD- or MS-compatible name lister (nm)], lt_cv_path_NM, -[if test -n "$NM"; then - # Let the user override the test. - lt_cv_path_NM="$NM" -else - lt_nm_to_check="${ac_tool_prefix}nm" - if test -n "$ac_tool_prefix" && test "$build" = "$host"; then - lt_nm_to_check="$lt_nm_to_check nm" - fi - for lt_tmp_nm in $lt_nm_to_check; do - lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR - for ac_dir in $PATH /usr/ccs/bin/elf /usr/ccs/bin /usr/ucb /bin; do - IFS="$lt_save_ifs" - test -z "$ac_dir" && ac_dir=. - tmp_nm="$ac_dir/$lt_tmp_nm" - if test -f "$tmp_nm" || test -f "$tmp_nm$ac_exeext" ; then - # Check to see if the nm accepts a BSD-compat flag. - # Adding the `sed 1q' prevents false positives on HP-UX, which says: - # nm: unknown option "B" ignored - # Tru64's nm complains that /dev/null is an invalid object file - case `"$tmp_nm" -B /dev/null 2>&1 | sed '1q'` in - */dev/null* | *'Invalid file or object type'*) - lt_cv_path_NM="$tmp_nm -B" - break - ;; - *) - case `"$tmp_nm" -p /dev/null 2>&1 | sed '1q'` in - */dev/null*) - lt_cv_path_NM="$tmp_nm -p" - break - ;; - *) - lt_cv_path_NM=${lt_cv_path_NM="$tmp_nm"} # keep the first match, but - continue # so that we can try to find one that supports BSD flags - ;; - esac - ;; - esac - fi - done - IFS="$lt_save_ifs" - done - : ${lt_cv_path_NM=no} -fi]) -if test "$lt_cv_path_NM" != "no"; then - NM="$lt_cv_path_NM" -else - # Didn't find any BSD compatible name lister, look for dumpbin. - AC_CHECK_TOOLS(DUMPBIN, ["dumpbin -symbols" "link -dump -symbols"], :) - AC_SUBST([DUMPBIN]) - if test "$DUMPBIN" != ":"; then - NM="$DUMPBIN" - fi -fi -test -z "$NM" && NM=nm -AC_SUBST([NM]) -_LT_DECL([], [NM], [1], [A BSD- or MS-compatible name lister])dnl - -AC_CACHE_CHECK([the name lister ($NM) interface], [lt_cv_nm_interface], - [lt_cv_nm_interface="BSD nm" - echo "int some_variable = 0;" > conftest.$ac_ext - (eval echo "\"\$as_me:__oline__: $ac_compile\"" >&AS_MESSAGE_LOG_FD) - (eval "$ac_compile" 2>conftest.err) - cat conftest.err >&AS_MESSAGE_LOG_FD - (eval echo "\"\$as_me:__oline__: $NM \\\"conftest.$ac_objext\\\"\"" >&AS_MESSAGE_LOG_FD) - (eval "$NM \"conftest.$ac_objext\"" 2>conftest.err > conftest.out) - cat conftest.err >&AS_MESSAGE_LOG_FD - (eval echo "\"\$as_me:__oline__: output\"" >&AS_MESSAGE_LOG_FD) - cat conftest.out >&AS_MESSAGE_LOG_FD - if $GREP 'External.*some_variable' conftest.out > /dev/null; then - lt_cv_nm_interface="MS dumpbin" - fi - rm -f conftest*]) -])# LT_PATH_NM - -# Old names: -AU_ALIAS([AM_PROG_NM], [LT_PATH_NM]) -AU_ALIAS([AC_PROG_NM], [LT_PATH_NM]) -dnl aclocal-1.4 backwards compatibility: -dnl AC_DEFUN([AM_PROG_NM], []) -dnl AC_DEFUN([AC_PROG_NM], []) - - -# LT_LIB_M -# -------- -# check for math library -AC_DEFUN([LT_LIB_M], -[AC_REQUIRE([AC_CANONICAL_HOST])dnl -LIBM= -case $host in -*-*-beos* | *-*-cygwin* | *-*-pw32* | *-*-darwin*) - # These system don't have libm, or don't need it - ;; -*-ncr-sysv4.3*) - AC_CHECK_LIB(mw, _mwvalidcheckl, LIBM="-lmw") - AC_CHECK_LIB(m, cos, LIBM="$LIBM -lm") - ;; -*) - AC_CHECK_LIB(m, cos, LIBM="-lm") - ;; -esac -AC_SUBST([LIBM]) -])# LT_LIB_M - -# Old name: -AU_ALIAS([AC_CHECK_LIBM], [LT_LIB_M]) -dnl aclocal-1.4 backwards compatibility: -dnl AC_DEFUN([AC_CHECK_LIBM], []) - - -# _LT_COMPILER_NO_RTTI([TAGNAME]) -# ------------------------------- -m4_defun([_LT_COMPILER_NO_RTTI], -[m4_require([_LT_TAG_COMPILER])dnl - -_LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)= - -if test "$GCC" = yes; then - _LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=' -fno-builtin' - - _LT_COMPILER_OPTION([if $compiler supports -fno-rtti -fno-exceptions], - lt_cv_prog_compiler_rtti_exceptions, - [-fno-rtti -fno-exceptions], [], - [_LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)="$_LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1) -fno-rtti -fno-exceptions"]) -fi -_LT_TAGDECL([no_builtin_flag], [lt_prog_compiler_no_builtin_flag], [1], - [Compiler flag to turn off builtin functions]) -])# _LT_COMPILER_NO_RTTI - - -# _LT_CMD_GLOBAL_SYMBOLS -# ---------------------- -m4_defun([_LT_CMD_GLOBAL_SYMBOLS], -[AC_REQUIRE([AC_CANONICAL_HOST])dnl -AC_REQUIRE([AC_PROG_CC])dnl -AC_REQUIRE([LT_PATH_NM])dnl -AC_REQUIRE([LT_PATH_LD])dnl -m4_require([_LT_DECL_SED])dnl -m4_require([_LT_DECL_EGREP])dnl -m4_require([_LT_TAG_COMPILER])dnl - -# Check for command to grab the raw symbol name followed by C symbol from nm. -AC_MSG_CHECKING([command to parse $NM output from $compiler object]) -AC_CACHE_VAL([lt_cv_sys_global_symbol_pipe], -[ -# These are sane defaults that work on at least a few old systems. -# [They come from Ultrix. What could be older than Ultrix?!! ;)] - -# Character class describing NM global symbol codes. -symcode='[[BCDEGRST]]' - -# Regexp to match symbols that can be accessed directly from C. -sympat='\([[_A-Za-z]][[_A-Za-z0-9]]*\)' - -# Define system-specific variables. -case $host_os in -aix*) - symcode='[[BCDT]]' - ;; -cygwin* | mingw* | pw32* | cegcc*) - symcode='[[ABCDGISTW]]' - ;; -hpux*) - if test "$host_cpu" = ia64; then - symcode='[[ABCDEGRST]]' - fi - ;; -irix* | nonstopux*) - symcode='[[BCDEGRST]]' - ;; -osf*) - symcode='[[BCDEGQRST]]' - ;; -solaris*) - symcode='[[BDRT]]' - ;; -sco3.2v5*) - symcode='[[DT]]' - ;; -sysv4.2uw2*) - symcode='[[DT]]' - ;; -sysv5* | sco5v6* | unixware* | OpenUNIX*) - symcode='[[ABDT]]' - ;; -sysv4) - symcode='[[DFNSTU]]' - ;; -esac - -# If we're using GNU nm, then use its standard symbol codes. -case `$NM -V 2>&1` in -*GNU* | *'with BFD'*) - symcode='[[ABCDGIRSTW]]' ;; -esac - -# Transform an extracted symbol line into a proper C declaration. -# Some systems (esp. on ia64) link data and code symbols differently, -# so use this general approach. -lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern int \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'" - -# Transform an extracted symbol line into symbol name and symbol address -lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([[^ ]]*\) $/ {\\\"\1\\\", (void *) 0},/p' -e 's/^$symcode* \([[^ ]]*\) \([[^ ]]*\)$/ {\"\2\", (void *) \&\2},/p'" -lt_cv_sys_global_symbol_to_c_name_address_lib_prefix="sed -n -e 's/^: \([[^ ]]*\) $/ {\\\"\1\\\", (void *) 0},/p' -e 's/^$symcode* \([[^ ]]*\) \(lib[[^ ]]*\)$/ {\"\2\", (void *) \&\2},/p' -e 's/^$symcode* \([[^ ]]*\) \([[^ ]]*\)$/ {\"lib\2\", (void *) \&\2},/p'" - -# Handle CRLF in mingw tool chain -opt_cr= -case $build_os in -mingw*) - opt_cr=`$ECHO 'x\{0,1\}' | tr x '\015'` # option cr in regexp - ;; -esac - -# Try without a prefix underscore, then with it. -for ac_symprfx in "" "_"; do - - # Transform symcode, sympat, and symprfx into a raw symbol and a C symbol. - symxfrm="\\1 $ac_symprfx\\2 \\2" - - # Write the raw and C identifiers. - if test "$lt_cv_nm_interface" = "MS dumpbin"; then - # Fake it for dumpbin and say T for any non-static function - # and D for any global variable. - # Also find C++ and __fastcall symbols from MSVC++, - # which start with @ or ?. - lt_cv_sys_global_symbol_pipe="$AWK ['"\ -" {last_section=section; section=\$ 3};"\ -" /Section length .*#relocs.*(pick any)/{hide[last_section]=1};"\ -" \$ 0!~/External *\|/{next};"\ -" / 0+ UNDEF /{next}; / UNDEF \([^|]\)*()/{next};"\ -" {if(hide[section]) next};"\ -" {f=0}; \$ 0~/\(\).*\|/{f=1}; {printf f ? \"T \" : \"D \"};"\ -" {split(\$ 0, a, /\||\r/); split(a[2], s)};"\ -" s[1]~/^[@?]/{print s[1], s[1]; next};"\ -" s[1]~prfx {split(s[1],t,\"@\"); print t[1], substr(t[1],length(prfx))}"\ -" ' prfx=^$ac_symprfx]" - else - lt_cv_sys_global_symbol_pipe="sed -n -e 's/^.*[[ ]]\($symcode$symcode*\)[[ ]][[ ]]*$ac_symprfx$sympat$opt_cr$/$symxfrm/p'" - fi - - # Check to see that the pipe works correctly. - pipe_works=no - - rm -f conftest* - cat > conftest.$ac_ext <<_LT_EOF -#ifdef __cplusplus -extern "C" { -#endif -char nm_test_var; -void nm_test_func(void); -void nm_test_func(void){} -#ifdef __cplusplus -} -#endif -int main(){nm_test_var='a';nm_test_func();return(0);} -_LT_EOF - - if AC_TRY_EVAL(ac_compile); then - # Now try to grab the symbols. - nlist=conftest.nm - if AC_TRY_EVAL(NM conftest.$ac_objext \| $lt_cv_sys_global_symbol_pipe \> $nlist) && test -s "$nlist"; then - # Try sorting and uniquifying the output. - if sort "$nlist" | uniq > "$nlist"T; then - mv -f "$nlist"T "$nlist" - else - rm -f "$nlist"T - fi - - # Make sure that we snagged all the symbols we need. - if $GREP ' nm_test_var$' "$nlist" >/dev/null; then - if $GREP ' nm_test_func$' "$nlist" >/dev/null; then - cat <<_LT_EOF > conftest.$ac_ext -#ifdef __cplusplus -extern "C" { -#endif - -_LT_EOF - # Now generate the symbol file. - eval "$lt_cv_sys_global_symbol_to_cdecl"' < "$nlist" | $GREP -v main >> conftest.$ac_ext' - - cat <<_LT_EOF >> conftest.$ac_ext - -/* The mapping between symbol names and symbols. */ -const struct { - const char *name; - void *address; -} -lt__PROGRAM__LTX_preloaded_symbols[[]] = -{ - { "@PROGRAM@", (void *) 0 }, -_LT_EOF - $SED "s/^$symcode$symcode* \(.*\) \(.*\)$/ {\"\2\", (void *) \&\2},/" < "$nlist" | $GREP -v main >> conftest.$ac_ext - cat <<\_LT_EOF >> conftest.$ac_ext - {0, (void *) 0} -}; - -/* This works around a problem in FreeBSD linker */ -#ifdef FREEBSD_WORKAROUND -static const void *lt_preloaded_setup() { - return lt__PROGRAM__LTX_preloaded_symbols; -} -#endif - -#ifdef __cplusplus -} -#endif -_LT_EOF - # Now try linking the two files. - mv conftest.$ac_objext conftstm.$ac_objext - lt_save_LIBS="$LIBS" - lt_save_CFLAGS="$CFLAGS" - LIBS="conftstm.$ac_objext" - CFLAGS="$CFLAGS$_LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)" - if AC_TRY_EVAL(ac_link) && test -s conftest${ac_exeext}; then - pipe_works=yes - fi - LIBS="$lt_save_LIBS" - CFLAGS="$lt_save_CFLAGS" - else - echo "cannot find nm_test_func in $nlist" >&AS_MESSAGE_LOG_FD - fi - else - echo "cannot find nm_test_var in $nlist" >&AS_MESSAGE_LOG_FD - fi - else - echo "cannot run $lt_cv_sys_global_symbol_pipe" >&AS_MESSAGE_LOG_FD - fi - else - echo "$progname: failed program was:" >&AS_MESSAGE_LOG_FD - cat conftest.$ac_ext >&5 - fi - rm -rf conftest* conftst* - - # Do not use the global_symbol_pipe unless it works. - if test "$pipe_works" = yes; then - break - else - lt_cv_sys_global_symbol_pipe= - fi -done -]) -if test -z "$lt_cv_sys_global_symbol_pipe"; then - lt_cv_sys_global_symbol_to_cdecl= -fi -if test -z "$lt_cv_sys_global_symbol_pipe$lt_cv_sys_global_symbol_to_cdecl"; then - AC_MSG_RESULT(failed) -else - AC_MSG_RESULT(ok) -fi - -_LT_DECL([global_symbol_pipe], [lt_cv_sys_global_symbol_pipe], [1], - [Take the output of nm and produce a listing of raw symbols and C names]) -_LT_DECL([global_symbol_to_cdecl], [lt_cv_sys_global_symbol_to_cdecl], [1], - [Transform the output of nm in a proper C declaration]) -_LT_DECL([global_symbol_to_c_name_address], - [lt_cv_sys_global_symbol_to_c_name_address], [1], - [Transform the output of nm in a C name address pair]) -_LT_DECL([global_symbol_to_c_name_address_lib_prefix], - [lt_cv_sys_global_symbol_to_c_name_address_lib_prefix], [1], - [Transform the output of nm in a C name address pair when lib prefix is needed]) -]) # _LT_CMD_GLOBAL_SYMBOLS - - -# _LT_COMPILER_PIC([TAGNAME]) -# --------------------------- -m4_defun([_LT_COMPILER_PIC], -[m4_require([_LT_TAG_COMPILER])dnl -_LT_TAGVAR(lt_prog_compiler_wl, $1)= -_LT_TAGVAR(lt_prog_compiler_pic, $1)= -_LT_TAGVAR(lt_prog_compiler_static, $1)= - -AC_MSG_CHECKING([for $compiler option to produce PIC]) -m4_if([$1], [CXX], [ - # C++ specific cases for pic, static, wl, etc. - if test "$GXX" = yes; then - _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' - _LT_TAGVAR(lt_prog_compiler_static, $1)='-static' - - case $host_os in - aix*) - # All AIX code is PIC. - if test "$host_cpu" = ia64; then - # AIX 5 now supports IA64 processor - _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' - fi - ;; - - amigaos*) - case $host_cpu in - powerpc) - # see comment about AmigaOS4 .so support - _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' - ;; - m68k) - # FIXME: we need at least 68020 code to build shared libraries, but - # adding the `-m68020' flag to GCC prevents building anything better, - # like `-m68040'. - _LT_TAGVAR(lt_prog_compiler_pic, $1)='-m68020 -resident32 -malways-restore-a4' - ;; - esac - ;; - - beos* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*) - # PIC is the default for these OSes. - ;; - mingw* | cygwin* | os2* | pw32* | cegcc*) - # This hack is so that the source file can tell whether it is being - # built for inclusion in a dll (and should export symbols for example). - # Although the cygwin gcc ignores -fPIC, still need this for old-style - # (--disable-auto-import) libraries - m4_if([$1], [GCJ], [], - [_LT_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT']) - ;; - darwin* | rhapsody*) - # PIC is the default on this platform - # Common symbols not allowed in MH_DYLIB files - _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fno-common' - ;; - *djgpp*) - # DJGPP does not support shared libraries at all - _LT_TAGVAR(lt_prog_compiler_pic, $1)= - ;; - interix[[3-9]]*) - # Interix 3.x gcc -fpic/-fPIC options generate broken code. - # Instead, we relocate shared libraries at runtime. - ;; - sysv4*MP*) - if test -d /usr/nec; then - _LT_TAGVAR(lt_prog_compiler_pic, $1)=-Kconform_pic - fi - ;; - hpux*) - # PIC is the default for 64-bit PA HP-UX, but not for 32-bit - # PA HP-UX. On IA64 HP-UX, PIC is the default but the pic flag - # sets the default TLS model and affects inlining. - case $host_cpu in - hppa*64*) - ;; - *) - _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' - ;; - esac - ;; - *qnx* | *nto*) - # QNX uses GNU C++, but need to define -shared option too, otherwise - # it will coredump. - _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC -shared' - ;; - *) - _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' - ;; - esac - else - case $host_os in - aix[[4-9]]*) - # All AIX code is PIC. - if test "$host_cpu" = ia64; then - # AIX 5 now supports IA64 processor - _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' - else - _LT_TAGVAR(lt_prog_compiler_static, $1)='-bnso -bI:/lib/syscalls.exp' - fi - ;; - chorus*) - case $cc_basename in - cxch68*) - # Green Hills C++ Compiler - # _LT_TAGVAR(lt_prog_compiler_static, $1)="--no_auto_instantiation -u __main -u __premain -u _abort -r $COOL_DIR/lib/libOrb.a $MVME_DIR/lib/CC/libC.a $MVME_DIR/lib/classix/libcx.s.a" - ;; - esac - ;; - dgux*) - case $cc_basename in - ec++*) - _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' - ;; - ghcx*) - # Green Hills C++ Compiler - _LT_TAGVAR(lt_prog_compiler_pic, $1)='-pic' - ;; - *) - ;; - esac - ;; - freebsd* | dragonfly*) - # FreeBSD uses GNU C++ - ;; - hpux9* | hpux10* | hpux11*) - case $cc_basename in - CC*) - _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' - _LT_TAGVAR(lt_prog_compiler_static, $1)='${wl}-a ${wl}archive' - if test "$host_cpu" != ia64; then - _LT_TAGVAR(lt_prog_compiler_pic, $1)='+Z' - fi - ;; - aCC*) - _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' - _LT_TAGVAR(lt_prog_compiler_static, $1)='${wl}-a ${wl}archive' - case $host_cpu in - hppa*64*|ia64*) - # +Z the default - ;; - *) - _LT_TAGVAR(lt_prog_compiler_pic, $1)='+Z' - ;; - esac - ;; - *) - ;; - esac - ;; - interix*) - # This is c89, which is MS Visual C++ (no shared libs) - # Anyone wants to do a port? - ;; - irix5* | irix6* | nonstopux*) - case $cc_basename in - CC*) - _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' - _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared' - # CC pic flag -KPIC is the default. - ;; - *) - ;; - esac - ;; - linux* | k*bsd*-gnu) - case $cc_basename in - KCC*) - # KAI C++ Compiler - _LT_TAGVAR(lt_prog_compiler_wl, $1)='--backend -Wl,' - _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' - ;; - ecpc* ) - # old Intel C++ for x86_64 which still supported -KPIC. - _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' - _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' - _LT_TAGVAR(lt_prog_compiler_static, $1)='-static' - ;; - icpc* ) - # Intel C++, used to be incompatible with GCC. - # ICC 10 doesn't accept -KPIC any more. - _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' - _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' - _LT_TAGVAR(lt_prog_compiler_static, $1)='-static' - ;; - pgCC* | pgcpp*) - # Portland Group C++ compiler - _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' - _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fpic' - _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' - ;; - cxx*) - # Compaq C++ - # Make sure the PIC flag is empty. It appears that all Alpha - # Linux and Compaq Tru64 Unix objects are PIC. - _LT_TAGVAR(lt_prog_compiler_pic, $1)= - _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared' - ;; - xlc* | xlC*) - # IBM XL 8.0 on PPC - _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' - _LT_TAGVAR(lt_prog_compiler_pic, $1)='-qpic' - _LT_TAGVAR(lt_prog_compiler_static, $1)='-qstaticlink' - ;; - *) - case `$CC -V 2>&1 | sed 5q` in - *Sun\ C*) - # Sun C++ 5.9 - _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' - _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' - _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld ' - ;; - esac - ;; - esac - ;; - lynxos*) - ;; - m88k*) - ;; - mvs*) - case $cc_basename in - cxx*) - _LT_TAGVAR(lt_prog_compiler_pic, $1)='-W c,exportall' - ;; - *) - ;; - esac - ;; - netbsd*) - ;; - *qnx* | *nto*) - # QNX uses GNU C++, but need to define -shared option too, otherwise - # it will coredump. - _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC -shared' - ;; - osf3* | osf4* | osf5*) - case $cc_basename in - KCC*) - _LT_TAGVAR(lt_prog_compiler_wl, $1)='--backend -Wl,' - ;; - RCC*) - # Rational C++ 2.4.1 - _LT_TAGVAR(lt_prog_compiler_pic, $1)='-pic' - ;; - cxx*) - # Digital/Compaq C++ - _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' - # Make sure the PIC flag is empty. It appears that all Alpha - # Linux and Compaq Tru64 Unix objects are PIC. - _LT_TAGVAR(lt_prog_compiler_pic, $1)= - _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared' - ;; - *) - ;; - esac - ;; - psos*) - ;; - solaris*) - case $cc_basename in - CC*) - # Sun C++ 4.2, 5.x and Centerline C++ - _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' - _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' - _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld ' - ;; - gcx*) - # Green Hills C++ Compiler - _LT_TAGVAR(lt_prog_compiler_pic, $1)='-PIC' - ;; - *) - ;; - esac - ;; - sunos4*) - case $cc_basename in - CC*) - # Sun C++ 4.x - _LT_TAGVAR(lt_prog_compiler_pic, $1)='-pic' - _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' - ;; - lcc*) - # Lucid - _LT_TAGVAR(lt_prog_compiler_pic, $1)='-pic' - ;; - *) - ;; - esac - ;; - sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*) - case $cc_basename in - CC*) - _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' - _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' - _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' - ;; - esac - ;; - tandem*) - case $cc_basename in - NCC*) - # NonStop-UX NCC 3.20 - _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' - ;; - *) - ;; - esac - ;; - vxworks*) - ;; - *) - _LT_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no - ;; - esac - fi -], -[ - if test "$GCC" = yes; then - _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' - _LT_TAGVAR(lt_prog_compiler_static, $1)='-static' - - case $host_os in - aix*) - # All AIX code is PIC. - if test "$host_cpu" = ia64; then - # AIX 5 now supports IA64 processor - _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' - fi - ;; - - amigaos*) - case $host_cpu in - powerpc) - # see comment about AmigaOS4 .so support - _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' - ;; - m68k) - # FIXME: we need at least 68020 code to build shared libraries, but - # adding the `-m68020' flag to GCC prevents building anything better, - # like `-m68040'. - _LT_TAGVAR(lt_prog_compiler_pic, $1)='-m68020 -resident32 -malways-restore-a4' - ;; - esac - ;; - - beos* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*) - # PIC is the default for these OSes. - ;; - - mingw* | cygwin* | pw32* | os2* | cegcc*) - # This hack is so that the source file can tell whether it is being - # built for inclusion in a dll (and should export symbols for example). - # Although the cygwin gcc ignores -fPIC, still need this for old-style - # (--disable-auto-import) libraries - m4_if([$1], [GCJ], [], - [_LT_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT']) - ;; - - darwin* | rhapsody*) - # PIC is the default on this platform - # Common symbols not allowed in MH_DYLIB files - _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fno-common' - ;; - - hpux*) - # PIC is the default for 64-bit PA HP-UX, but not for 32-bit - # PA HP-UX. On IA64 HP-UX, PIC is the default but the pic flag - # sets the default TLS model and affects inlining. - case $host_cpu in - hppa*64*) - # +Z the default - ;; - *) - _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' - ;; - esac - ;; - - interix[[3-9]]*) - # Interix 3.x gcc -fpic/-fPIC options generate broken code. - # Instead, we relocate shared libraries at runtime. - ;; - - msdosdjgpp*) - # Just because we use GCC doesn't mean we suddenly get shared libraries - # on systems that don't support them. - _LT_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no - enable_shared=no - ;; - - *nto* | *qnx*) - # QNX uses GNU C++, but need to define -shared option too, otherwise - # it will coredump. - _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC -shared' - ;; - - sysv4*MP*) - if test -d /usr/nec; then - _LT_TAGVAR(lt_prog_compiler_pic, $1)=-Kconform_pic - fi - ;; - - *) - _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' - ;; - esac - else - # PORTME Check for flag to pass linker flags through the system compiler. - case $host_os in - aix*) - _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' - if test "$host_cpu" = ia64; then - # AIX 5 now supports IA64 processor - _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' - else - _LT_TAGVAR(lt_prog_compiler_static, $1)='-bnso -bI:/lib/syscalls.exp' - fi - ;; - - mingw* | cygwin* | pw32* | os2* | cegcc*) - # This hack is so that the source file can tell whether it is being - # built for inclusion in a dll (and should export symbols for example). - m4_if([$1], [GCJ], [], - [_LT_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT']) - ;; - - hpux9* | hpux10* | hpux11*) - _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' - # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but - # not for PA HP-UX. - case $host_cpu in - hppa*64*|ia64*) - # +Z the default - ;; - *) - _LT_TAGVAR(lt_prog_compiler_pic, $1)='+Z' - ;; - esac - # Is there a better lt_prog_compiler_static that works with the bundled CC? - _LT_TAGVAR(lt_prog_compiler_static, $1)='${wl}-a ${wl}archive' - ;; - - irix5* | irix6* | nonstopux*) - _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' - # PIC (with -KPIC) is the default. - _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared' - ;; - - linux* | k*bsd*-gnu) - case $cc_basename in - # old Intel for x86_64 which still supported -KPIC. - ecc*) - _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' - _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' - _LT_TAGVAR(lt_prog_compiler_static, $1)='-static' - ;; - # icc used to be incompatible with GCC. - # ICC 10 doesn't accept -KPIC any more. - icc* | ifort*) - _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' - _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' - _LT_TAGVAR(lt_prog_compiler_static, $1)='-static' - ;; - # Lahey Fortran 8.1. - lf95*) - _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' - _LT_TAGVAR(lt_prog_compiler_pic, $1)='--shared' - _LT_TAGVAR(lt_prog_compiler_static, $1)='--static' - ;; - pgcc* | pgf77* | pgf90* | pgf95*) - # Portland Group compilers (*not* the Pentium gcc compiler, - # which looks to be a dead project) - _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' - _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fpic' - _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' - ;; - ccc*) - _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' - # All Alpha code is PIC. - _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared' - ;; - xl*) - # IBM XL C 8.0/Fortran 10.1 on PPC - _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' - _LT_TAGVAR(lt_prog_compiler_pic, $1)='-qpic' - _LT_TAGVAR(lt_prog_compiler_static, $1)='-qstaticlink' - ;; - *) - case `$CC -V 2>&1 | sed 5q` in - *Sun\ C*) - # Sun C 5.9 - _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' - _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' - _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' - ;; - *Sun\ F*) - # Sun Fortran 8.3 passes all unrecognized flags to the linker - _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' - _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' - _LT_TAGVAR(lt_prog_compiler_wl, $1)='' - ;; - esac - ;; - esac - ;; - - newsos6) - _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' - _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' - ;; - - *nto* | *qnx*) - # QNX uses GNU C++, but need to define -shared option too, otherwise - # it will coredump. - _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC -shared' - ;; - - osf3* | osf4* | osf5*) - _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' - # All OSF/1 code is PIC. - _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared' - ;; - - rdos*) - _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared' - ;; - - solaris*) - _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' - _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' - case $cc_basename in - f77* | f90* | f95*) - _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld ';; - *) - _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,';; - esac - ;; - - sunos4*) - _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld ' - _LT_TAGVAR(lt_prog_compiler_pic, $1)='-PIC' - _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' - ;; - - sysv4 | sysv4.2uw2* | sysv4.3*) - _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' - _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' - _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' - ;; - - sysv4*MP*) - if test -d /usr/nec ;then - _LT_TAGVAR(lt_prog_compiler_pic, $1)='-Kconform_pic' - _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' - fi - ;; - - sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*) - _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' - _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' - _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' - ;; - - unicos*) - _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' - _LT_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no - ;; - - uts4*) - _LT_TAGVAR(lt_prog_compiler_pic, $1)='-pic' - _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' - ;; - - *) - _LT_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no - ;; - esac - fi -]) -case $host_os in - # For platforms which do not support PIC, -DPIC is meaningless: - *djgpp*) - _LT_TAGVAR(lt_prog_compiler_pic, $1)= - ;; - *) - _LT_TAGVAR(lt_prog_compiler_pic, $1)="$_LT_TAGVAR(lt_prog_compiler_pic, $1)@&t@m4_if([$1],[],[ -DPIC],[m4_if([$1],[CXX],[ -DPIC],[])])" - ;; -esac -AC_MSG_RESULT([$_LT_TAGVAR(lt_prog_compiler_pic, $1)]) -_LT_TAGDECL([wl], [lt_prog_compiler_wl], [1], - [How to pass a linker flag through the compiler]) - -# -# Check to make sure the PIC flag actually works. -# -if test -n "$_LT_TAGVAR(lt_prog_compiler_pic, $1)"; then - _LT_COMPILER_OPTION([if $compiler PIC flag $_LT_TAGVAR(lt_prog_compiler_pic, $1) works], - [_LT_TAGVAR(lt_cv_prog_compiler_pic_works, $1)], - [$_LT_TAGVAR(lt_prog_compiler_pic, $1)@&t@m4_if([$1],[],[ -DPIC],[m4_if([$1],[CXX],[ -DPIC],[])])], [], - [case $_LT_TAGVAR(lt_prog_compiler_pic, $1) in - "" | " "*) ;; - *) _LT_TAGVAR(lt_prog_compiler_pic, $1)=" $_LT_TAGVAR(lt_prog_compiler_pic, $1)" ;; - esac], - [_LT_TAGVAR(lt_prog_compiler_pic, $1)= - _LT_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no]) -fi -_LT_TAGDECL([pic_flag], [lt_prog_compiler_pic], [1], - [Additional compiler flags for building library objects]) - -# -# Check to make sure the static flag actually works. -# -wl=$_LT_TAGVAR(lt_prog_compiler_wl, $1) eval lt_tmp_static_flag=\"$_LT_TAGVAR(lt_prog_compiler_static, $1)\" -_LT_LINKER_OPTION([if $compiler static flag $lt_tmp_static_flag works], - _LT_TAGVAR(lt_cv_prog_compiler_static_works, $1), - $lt_tmp_static_flag, - [], - [_LT_TAGVAR(lt_prog_compiler_static, $1)=]) -_LT_TAGDECL([link_static_flag], [lt_prog_compiler_static], [1], - [Compiler flag to prevent dynamic linking]) -])# _LT_COMPILER_PIC - - -# _LT_LINKER_SHLIBS([TAGNAME]) -# ---------------------------- -# See if the linker supports building shared libraries. -m4_defun([_LT_LINKER_SHLIBS], -[AC_REQUIRE([LT_PATH_LD])dnl -AC_REQUIRE([LT_PATH_NM])dnl -m4_require([_LT_FILEUTILS_DEFAULTS])dnl -m4_require([_LT_DECL_EGREP])dnl -m4_require([_LT_DECL_SED])dnl -m4_require([_LT_CMD_GLOBAL_SYMBOLS])dnl -m4_require([_LT_TAG_COMPILER])dnl -AC_MSG_CHECKING([whether the $compiler linker ($LD) supports shared libraries]) -m4_if([$1], [CXX], [ - _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols' - case $host_os in - aix[[4-9]]*) - # If we're using GNU nm, then we don't want the "-C" option. - # -C means demangle to AIX nm, but means don't demangle with GNU nm - if $NM -V 2>&1 | $GREP 'GNU' > /dev/null; then - _LT_TAGVAR(export_symbols_cmds, $1)='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B")) && ([substr](\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols' - else - _LT_TAGVAR(export_symbols_cmds, $1)='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B")) && ([substr](\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols' - fi - ;; - pw32*) - _LT_TAGVAR(export_symbols_cmds, $1)="$ltdll_cmds" - ;; - cygwin* | mingw* | cegcc*) - _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[[BCDGRS]][[ ]]/s/.*[[ ]]\([[^ ]]*\)/\1 DATA/;/^.*[[ ]]__nm__/s/^.*[[ ]]__nm__\([[^ ]]*\)[[ ]][[^ ]]*/\1 DATA/;/^I[[ ]]/d;/^[[AITW]][[ ]]/s/.* //'\'' | sort | uniq > $export_symbols' - ;; - *) - _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols' - ;; - esac - _LT_TAGVAR(exclude_expsyms, $1)=['_GLOBAL_OFFSET_TABLE_|_GLOBAL__F[ID]_.*'] -], [ - runpath_var= - _LT_TAGVAR(allow_undefined_flag, $1)= - _LT_TAGVAR(always_export_symbols, $1)=no - _LT_TAGVAR(archive_cmds, $1)= - _LT_TAGVAR(archive_expsym_cmds, $1)= - _LT_TAGVAR(compiler_needs_object, $1)=no - _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=no - _LT_TAGVAR(export_dynamic_flag_spec, $1)= - _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols' - _LT_TAGVAR(hardcode_automatic, $1)=no - _LT_TAGVAR(hardcode_direct, $1)=no - _LT_TAGVAR(hardcode_direct_absolute, $1)=no - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)= - _LT_TAGVAR(hardcode_libdir_flag_spec_ld, $1)= - _LT_TAGVAR(hardcode_libdir_separator, $1)= - _LT_TAGVAR(hardcode_minus_L, $1)=no - _LT_TAGVAR(hardcode_shlibpath_var, $1)=unsupported - _LT_TAGVAR(inherit_rpath, $1)=no - _LT_TAGVAR(link_all_deplibs, $1)=unknown - _LT_TAGVAR(module_cmds, $1)= - _LT_TAGVAR(module_expsym_cmds, $1)= - _LT_TAGVAR(old_archive_from_new_cmds, $1)= - _LT_TAGVAR(old_archive_from_expsyms_cmds, $1)= - _LT_TAGVAR(thread_safe_flag_spec, $1)= - _LT_TAGVAR(whole_archive_flag_spec, $1)= - # include_expsyms should be a list of space-separated symbols to be *always* - # included in the symbol list - _LT_TAGVAR(include_expsyms, $1)= - # exclude_expsyms can be an extended regexp of symbols to exclude - # it will be wrapped by ` (' and `)$', so one must not match beginning or - # end of line. Example: `a|bc|.*d.*' will exclude the symbols `a' and `bc', - # as well as any symbol that contains `d'. - _LT_TAGVAR(exclude_expsyms, $1)=['_GLOBAL_OFFSET_TABLE_|_GLOBAL__F[ID]_.*'] - # Although _GLOBAL_OFFSET_TABLE_ is a valid symbol C name, most a.out - # platforms (ab)use it in PIC code, but their linkers get confused if - # the symbol is explicitly referenced. Since portable code cannot - # rely on this symbol name, it's probably fine to never include it in - # preloaded symbol tables. - # Exclude shared library initialization/finalization symbols. -dnl Note also adjust exclude_expsyms for C++ above. - extract_expsyms_cmds= - - case $host_os in - cygwin* | mingw* | pw32* | cegcc*) - # FIXME: the MSVC++ port hasn't been tested in a loooong time - # When not using gcc, we currently assume that we are using - # Microsoft Visual C++. - if test "$GCC" != yes; then - with_gnu_ld=no - fi - ;; - interix*) - # we just hope/assume this is gcc and not c89 (= MSVC++) - with_gnu_ld=yes - ;; - openbsd*) - with_gnu_ld=no - ;; - esac - - _LT_TAGVAR(ld_shlibs, $1)=yes - if test "$with_gnu_ld" = yes; then - # If archive_cmds runs LD, not CC, wlarc should be empty - wlarc='${wl}' - - # Set some defaults for GNU ld with shared library support. These - # are reset later if shared libraries are not supported. Putting them - # here allows them to be overridden if necessary. - runpath_var=LD_RUN_PATH - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' - _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic' - # ancient GNU ld didn't support --whole-archive et. al. - if $LD --help 2>&1 | $GREP 'no-whole-archive' > /dev/null; then - _LT_TAGVAR(whole_archive_flag_spec, $1)="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive' - else - _LT_TAGVAR(whole_archive_flag_spec, $1)= - fi - supports_anon_versioning=no - case `$LD -v 2>&1` in - *\ [[01]].* | *\ 2.[[0-9]].* | *\ 2.10.*) ;; # catch versions < 2.11 - *\ 2.11.93.0.2\ *) supports_anon_versioning=yes ;; # RH7.3 ... - *\ 2.11.92.0.12\ *) supports_anon_versioning=yes ;; # Mandrake 8.2 ... - *\ 2.11.*) ;; # other 2.11 versions - *) supports_anon_versioning=yes ;; - esac - - # See if GNU ld supports shared libraries. - case $host_os in - aix[[3-9]]*) - # On AIX/PPC, the GNU linker is very broken - if test "$host_cpu" != ia64; then - _LT_TAGVAR(ld_shlibs, $1)=no - cat <<_LT_EOF 1>&2 - -*** Warning: the GNU linker, at least up to release 2.9.1, is reported -*** to be unable to reliably create shared libraries on AIX. -*** Therefore, libtool is disabling shared libraries support. If you -*** really care for shared libraries, you may want to modify your PATH -*** so that a non-GNU linker is found, and then restart. - -_LT_EOF - fi - ;; - - amigaos*) - case $host_cpu in - powerpc) - # see comment about AmigaOS4 .so support - _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' - _LT_TAGVAR(archive_expsym_cmds, $1)='' - ;; - m68k) - _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/a2ixlibrary.data~$ECHO "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$ECHO "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$ECHO "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$ECHO "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)' - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' - _LT_TAGVAR(hardcode_minus_L, $1)=yes - ;; - esac - ;; - - beos*) - if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then - _LT_TAGVAR(allow_undefined_flag, $1)=unsupported - # Joseph Beckenbach <jrb3@best.com> says some releases of gcc - # support --undefined. This deserves some investigation. FIXME - _LT_TAGVAR(archive_cmds, $1)='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' - else - _LT_TAGVAR(ld_shlibs, $1)=no - fi - ;; - - cygwin* | mingw* | pw32* | cegcc*) - # _LT_TAGVAR(hardcode_libdir_flag_spec, $1) is actually meaningless, - # as there is no search path for DLLs. - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' - _LT_TAGVAR(allow_undefined_flag, $1)=unsupported - _LT_TAGVAR(always_export_symbols, $1)=no - _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes - _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[[BCDGRS]][[ ]]/s/.*[[ ]]\([[^ ]]*\)/\1 DATA/'\'' | $SED -e '\''/^[[AITW]][[ ]]/s/.*[[ ]]//'\'' | sort | uniq > $export_symbols' - - if $LD --help 2>&1 | $GREP 'auto-import' > /dev/null; then - _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' - # If the export-symbols file already is a .def file (1st line - # is EXPORTS), use it as is; otherwise, prepend... - _LT_TAGVAR(archive_expsym_cmds, $1)='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then - cp $export_symbols $output_objdir/$soname.def; - else - echo EXPORTS > $output_objdir/$soname.def; - cat $export_symbols >> $output_objdir/$soname.def; - fi~ - $CC -shared $output_objdir/$soname.def $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' - else - _LT_TAGVAR(ld_shlibs, $1)=no - fi - ;; - - interix[[3-9]]*) - _LT_TAGVAR(hardcode_direct, $1)=no - _LT_TAGVAR(hardcode_shlibpath_var, $1)=no - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' - _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' - # Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc. - # Instead, shared libraries are loaded at an image base (0x10000000 by - # default) and relocated if they conflict, which is a slow very memory - # consuming and fragmenting process. To avoid this, we pick a random, - # 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link - # time. Moving up from 0x10000000 also allows more sbrk(2) space. - _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' - _LT_TAGVAR(archive_expsym_cmds, $1)='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' - ;; - - gnu* | linux* | tpf* | k*bsd*-gnu) - tmp_diet=no - if test "$host_os" = linux-dietlibc; then - case $cc_basename in - diet\ *) tmp_diet=yes;; # linux-dietlibc with static linking (!diet-dyn) - esac - fi - if $LD --help 2>&1 | $EGREP ': supported targets:.* elf' > /dev/null \ - && test "$tmp_diet" = no - then - tmp_addflag= - tmp_sharedflag='-shared' - case $cc_basename,$host_cpu in - pgcc*) # Portland Group C compiler - _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $ECHO \"$new_convenience\"` ${wl}--no-whole-archive' - tmp_addflag=' $pic_flag' - ;; - pgf77* | pgf90* | pgf95*) # Portland Group f77 and f90 compilers - _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $ECHO \"$new_convenience\"` ${wl}--no-whole-archive' - tmp_addflag=' $pic_flag -Mnomain' ;; - ecc*,ia64* | icc*,ia64*) # Intel C compiler on ia64 - tmp_addflag=' -i_dynamic' ;; - efc*,ia64* | ifort*,ia64*) # Intel Fortran compiler on ia64 - tmp_addflag=' -i_dynamic -nofor_main' ;; - ifc* | ifort*) # Intel Fortran compiler - tmp_addflag=' -nofor_main' ;; - lf95*) # Lahey Fortran 8.1 - _LT_TAGVAR(whole_archive_flag_spec, $1)= - tmp_sharedflag='--shared' ;; - xl[[cC]]*) # IBM XL C 8.0 on PPC (deal with xlf below) - tmp_sharedflag='-qmkshrobj' - tmp_addflag= ;; - esac - case `$CC -V 2>&1 | sed 5q` in - *Sun\ C*) # Sun C 5.9 - _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; $ECHO \"$new_convenience\"` ${wl}--no-whole-archive' - _LT_TAGVAR(compiler_needs_object, $1)=yes - tmp_sharedflag='-G' ;; - *Sun\ F*) # Sun Fortran 8.3 - tmp_sharedflag='-G' ;; - esac - _LT_TAGVAR(archive_cmds, $1)='$CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' - - if test "x$supports_anon_versioning" = xyes; then - _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $output_objdir/$libname.ver~ - cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~ - echo "local: *; };" >> $output_objdir/$libname.ver~ - $CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib' - fi - - case $cc_basename in - xlf*) - # IBM XL Fortran 10.1 on PPC cannot create shared libs itself - _LT_TAGVAR(whole_archive_flag_spec, $1)='--whole-archive$convenience --no-whole-archive' - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)= - _LT_TAGVAR(hardcode_libdir_flag_spec_ld, $1)='-rpath $libdir' - _LT_TAGVAR(archive_cmds, $1)='$LD -shared $libobjs $deplibs $compiler_flags -soname $soname -o $lib' - if test "x$supports_anon_versioning" = xyes; then - _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $output_objdir/$libname.ver~ - cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~ - echo "local: *; };" >> $output_objdir/$libname.ver~ - $LD -shared $libobjs $deplibs $compiler_flags -soname $soname -version-script $output_objdir/$libname.ver -o $lib' - fi - ;; - esac - else - _LT_TAGVAR(ld_shlibs, $1)=no - fi - ;; - - netbsd*) - if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then - _LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib' - wlarc= - else - _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' - _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' - fi - ;; - - solaris*) - if $LD -v 2>&1 | $GREP 'BFD 2\.8' > /dev/null; then - _LT_TAGVAR(ld_shlibs, $1)=no - cat <<_LT_EOF 1>&2 - -*** Warning: The releases 2.8.* of the GNU linker cannot reliably -*** create shared libraries on Solaris systems. Therefore, libtool -*** is disabling shared libraries support. We urge you to upgrade GNU -*** binutils to release 2.9.1 or newer. Another option is to modify -*** your PATH or compiler configuration so that the native linker is -*** used, and then restart. - -_LT_EOF - elif $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then - _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' - _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' - else - _LT_TAGVAR(ld_shlibs, $1)=no - fi - ;; - - sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX*) - case `$LD -v 2>&1` in - *\ [[01]].* | *\ 2.[[0-9]].* | *\ 2.1[[0-5]].*) - _LT_TAGVAR(ld_shlibs, $1)=no - cat <<_LT_EOF 1>&2 - -*** Warning: Releases of the GNU linker prior to 2.16.91.0.3 can not -*** reliably create shared libraries on SCO systems. Therefore, libtool -*** is disabling shared libraries support. We urge you to upgrade GNU -*** binutils to release 2.16.91.0.3 or newer. Another option is to modify -*** your PATH or compiler configuration so that the native linker is -*** used, and then restart. - -_LT_EOF - ;; - *) - # For security reasons, it is highly recommended that you always - # use absolute paths for naming shared libraries, and exclude the - # DT_RUNPATH tag from executables and libraries. But doing so - # requires that you compile everything twice, which is a pain. - if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' - _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' - _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' - else - _LT_TAGVAR(ld_shlibs, $1)=no - fi - ;; - esac - ;; - - sunos4*) - _LT_TAGVAR(archive_cmds, $1)='$LD -assert pure-text -Bshareable -o $lib $libobjs $deplibs $linker_flags' - wlarc= - _LT_TAGVAR(hardcode_direct, $1)=yes - _LT_TAGVAR(hardcode_shlibpath_var, $1)=no - ;; - - *) - if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then - _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' - _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' - else - _LT_TAGVAR(ld_shlibs, $1)=no - fi - ;; - esac - - if test "$_LT_TAGVAR(ld_shlibs, $1)" = no; then - runpath_var= - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)= - _LT_TAGVAR(export_dynamic_flag_spec, $1)= - _LT_TAGVAR(whole_archive_flag_spec, $1)= - fi - else - # PORTME fill in a description of your system's linker (not GNU ld) - case $host_os in - aix3*) - _LT_TAGVAR(allow_undefined_flag, $1)=unsupported - _LT_TAGVAR(always_export_symbols, $1)=yes - _LT_TAGVAR(archive_expsym_cmds, $1)='$LD -o $output_objdir/$soname $libobjs $deplibs $linker_flags -bE:$export_symbols -T512 -H512 -bM:SRE~$AR $AR_FLAGS $lib $output_objdir/$soname' - # Note: this linker hardcodes the directories in LIBPATH if there - # are no directories specified by -L. - _LT_TAGVAR(hardcode_minus_L, $1)=yes - if test "$GCC" = yes && test -z "$lt_prog_compiler_static"; then - # Neither direct hardcoding nor static linking is supported with a - # broken collect2. - _LT_TAGVAR(hardcode_direct, $1)=unsupported - fi - ;; - - aix[[4-9]]*) - if test "$host_cpu" = ia64; then - # On IA64, the linker does run time linking by default, so we don't - # have to do anything special. - aix_use_runtimelinking=no - exp_sym_flag='-Bexport' - no_entry_flag="" - else - # If we're using GNU nm, then we don't want the "-C" option. - # -C means demangle to AIX nm, but means don't demangle with GNU nm - if $NM -V 2>&1 | $GREP 'GNU' > /dev/null; then - _LT_TAGVAR(export_symbols_cmds, $1)='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B")) && ([substr](\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols' - else - _LT_TAGVAR(export_symbols_cmds, $1)='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B")) && ([substr](\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols' - fi - aix_use_runtimelinking=no - - # Test if we are trying to use run time linking or normal - # AIX style linking. If -brtl is somewhere in LDFLAGS, we - # need to do runtime linking. - case $host_os in aix4.[[23]]|aix4.[[23]].*|aix[[5-9]]*) - for ld_flag in $LDFLAGS; do - if (test $ld_flag = "-brtl" || test $ld_flag = "-Wl,-brtl"); then - aix_use_runtimelinking=yes - break - fi - done - ;; - esac - - exp_sym_flag='-bexport' - no_entry_flag='-bnoentry' - fi - - # When large executables or shared objects are built, AIX ld can - # have problems creating the table of contents. If linking a library - # or program results in "error TOC overflow" add -mminimal-toc to - # CXXFLAGS/CFLAGS for g++/gcc. In the cases where that is not - # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS. - - _LT_TAGVAR(archive_cmds, $1)='' - _LT_TAGVAR(hardcode_direct, $1)=yes - _LT_TAGVAR(hardcode_direct_absolute, $1)=yes - _LT_TAGVAR(hardcode_libdir_separator, $1)=':' - _LT_TAGVAR(link_all_deplibs, $1)=yes - _LT_TAGVAR(file_list_spec, $1)='${wl}-f,' - - if test "$GCC" = yes; then - case $host_os in aix4.[[012]]|aix4.[[012]].*) - # We only want to do this on AIX 4.2 and lower, the check - # below for broken collect2 doesn't work under 4.3+ - collect2name=`${CC} -print-prog-name=collect2` - if test -f "$collect2name" && - strings "$collect2name" | $GREP resolve_lib_name >/dev/null - then - # We have reworked collect2 - : - else - # We have old collect2 - _LT_TAGVAR(hardcode_direct, $1)=unsupported - # It fails to find uninstalled libraries when the uninstalled - # path is not listed in the libpath. Setting hardcode_minus_L - # to unsupported forces relinking - _LT_TAGVAR(hardcode_minus_L, $1)=yes - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' - _LT_TAGVAR(hardcode_libdir_separator, $1)= - fi - ;; - esac - shared_flag='-shared' - if test "$aix_use_runtimelinking" = yes; then - shared_flag="$shared_flag "'${wl}-G' - fi - else - # not using gcc - if test "$host_cpu" = ia64; then - # VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release - # chokes on -Wl,-G. The following line is correct: - shared_flag='-G' - else - if test "$aix_use_runtimelinking" = yes; then - shared_flag='${wl}-G' - else - shared_flag='${wl}-bM:SRE' - fi - fi - fi - - _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-bexpall' - # It seems that -bexpall does not export symbols beginning with - # underscore (_), so it is better to generate a list of symbols to export. - _LT_TAGVAR(always_export_symbols, $1)=yes - if test "$aix_use_runtimelinking" = yes; then - # Warning - without using the other runtime loading flags (-brtl), - # -berok will link without error, but may produce a broken library. - _LT_TAGVAR(allow_undefined_flag, $1)='-berok' - # Determine the default libpath from the value encoded in an - # empty executable. - _LT_SYS_MODULE_PATH_AIX - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath" - _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then $ECHO "X${wl}${allow_undefined_flag}" | $Xsed; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag" - else - if test "$host_cpu" = ia64; then - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $libdir:/usr/lib:/lib' - _LT_TAGVAR(allow_undefined_flag, $1)="-z nodefs" - _LT_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$exp_sym_flag:\$export_symbols" - else - # Determine the default libpath from the value encoded in an - # empty executable. - _LT_SYS_MODULE_PATH_AIX - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath" - # Warning - without using the other run time loading flags, - # -berok will link without error, but may produce a broken library. - _LT_TAGVAR(no_undefined_flag, $1)=' ${wl}-bernotok' - _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-berok' - # Exported symbols can be pulled into shared objects from archives - _LT_TAGVAR(whole_archive_flag_spec, $1)='$convenience' - _LT_TAGVAR(archive_cmds_need_lc, $1)=yes - # This is similar to how AIX traditionally builds its shared libraries. - _LT_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname' - fi - fi - ;; - - amigaos*) - case $host_cpu in - powerpc) - # see comment about AmigaOS4 .so support - _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' - _LT_TAGVAR(archive_expsym_cmds, $1)='' - ;; - m68k) - _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/a2ixlibrary.data~$ECHO "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$ECHO "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$ECHO "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$ECHO "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)' - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' - _LT_TAGVAR(hardcode_minus_L, $1)=yes - ;; - esac - ;; - - bsdi[[45]]*) - _LT_TAGVAR(export_dynamic_flag_spec, $1)=-rdynamic - ;; - - cygwin* | mingw* | pw32* | cegcc*) - # When not using gcc, we currently assume that we are using - # Microsoft Visual C++. - # hardcode_libdir_flag_spec is actually meaningless, as there is - # no search path for DLLs. - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)=' ' - _LT_TAGVAR(allow_undefined_flag, $1)=unsupported - # Tell ltmain to make .lib files, not .a files. - libext=lib - # Tell ltmain to make .dll files, not .so files. - shrext_cmds=".dll" - # FIXME: Setting linknames here is a bad hack. - _LT_TAGVAR(archive_cmds, $1)='$CC -o $lib $libobjs $compiler_flags `$ECHO "X$deplibs" | $Xsed -e '\''s/ -lc$//'\''` -link -dll~linknames=' - # The linker will automatically build a .lib file if we build a DLL. - _LT_TAGVAR(old_archive_from_new_cmds, $1)='true' - # FIXME: Should let the user specify the lib program. - _LT_TAGVAR(old_archive_cmds, $1)='lib -OUT:$oldlib$oldobjs$old_deplibs' - _LT_TAGVAR(fix_srcfile_path, $1)='`cygpath -w "$srcfile"`' - _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes - ;; - - darwin* | rhapsody*) - _LT_DARWIN_LINKER_FEATURES($1) - ;; - - dgux*) - _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' - _LT_TAGVAR(hardcode_shlibpath_var, $1)=no - ;; - - freebsd1*) - _LT_TAGVAR(ld_shlibs, $1)=no - ;; - - # FreeBSD 2.2.[012] allows us to include c++rt0.o to get C++ constructor - # support. Future versions do this automatically, but an explicit c++rt0.o - # does not break anything, and helps significantly (at the cost of a little - # extra space). - freebsd2.2*) - _LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags /usr/lib/c++rt0.o' - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' - _LT_TAGVAR(hardcode_direct, $1)=yes - _LT_TAGVAR(hardcode_shlibpath_var, $1)=no - ;; - - # Unfortunately, older versions of FreeBSD 2 do not have this feature. - freebsd2*) - _LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' - _LT_TAGVAR(hardcode_direct, $1)=yes - _LT_TAGVAR(hardcode_minus_L, $1)=yes - _LT_TAGVAR(hardcode_shlibpath_var, $1)=no - ;; - - # FreeBSD 3 and greater uses gcc -shared to do shared libraries. - freebsd* | dragonfly*) - _LT_TAGVAR(archive_cmds, $1)='$CC -shared -o $lib $libobjs $deplibs $compiler_flags' - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' - _LT_TAGVAR(hardcode_direct, $1)=yes - _LT_TAGVAR(hardcode_shlibpath_var, $1)=no - ;; - - hpux9*) - if test "$GCC" = yes; then - _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/$soname~$CC -shared -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' - else - _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' - fi - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir' - _LT_TAGVAR(hardcode_libdir_separator, $1)=: - _LT_TAGVAR(hardcode_direct, $1)=yes - - # hardcode_minus_L: Not really in the search PATH, - # but as the default location of the library. - _LT_TAGVAR(hardcode_minus_L, $1)=yes - _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' - ;; - - hpux10*) - if test "$GCC" = yes -a "$with_gnu_ld" = no; then - _LT_TAGVAR(archive_cmds, $1)='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags' - else - _LT_TAGVAR(archive_cmds, $1)='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags' - fi - if test "$with_gnu_ld" = no; then - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir' - _LT_TAGVAR(hardcode_libdir_flag_spec_ld, $1)='+b $libdir' - _LT_TAGVAR(hardcode_libdir_separator, $1)=: - _LT_TAGVAR(hardcode_direct, $1)=yes - _LT_TAGVAR(hardcode_direct_absolute, $1)=yes - _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' - # hardcode_minus_L: Not really in the search PATH, - # but as the default location of the library. - _LT_TAGVAR(hardcode_minus_L, $1)=yes - fi - ;; - - hpux11*) - if test "$GCC" = yes -a "$with_gnu_ld" = no; then - case $host_cpu in - hppa*64*) - _LT_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' - ;; - ia64*) - _LT_TAGVAR(archive_cmds, $1)='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags' - ;; - *) - _LT_TAGVAR(archive_cmds, $1)='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags' - ;; - esac - else - case $host_cpu in - hppa*64*) - _LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' - ;; - ia64*) - _LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags' - ;; - *) - _LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags' - ;; - esac - fi - if test "$with_gnu_ld" = no; then - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir' - _LT_TAGVAR(hardcode_libdir_separator, $1)=: - - case $host_cpu in - hppa*64*|ia64*) - _LT_TAGVAR(hardcode_direct, $1)=no - _LT_TAGVAR(hardcode_shlibpath_var, $1)=no - ;; - *) - _LT_TAGVAR(hardcode_direct, $1)=yes - _LT_TAGVAR(hardcode_direct_absolute, $1)=yes - _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' - - # hardcode_minus_L: Not really in the search PATH, - # but as the default location of the library. - _LT_TAGVAR(hardcode_minus_L, $1)=yes - ;; - esac - fi - ;; - - irix5* | irix6* | nonstopux*) - if test "$GCC" = yes; then - _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' - # Try to use the -exported_symbol ld option, if it does not - # work, assume that -exports_file does not work either and - # implicitly export all symbols. - save_LDFLAGS="$LDFLAGS" - LDFLAGS="$LDFLAGS -shared ${wl}-exported_symbol ${wl}foo ${wl}-update_registry ${wl}/dev/null" - AC_LINK_IFELSE(int foo(void) {}, - _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations ${wl}-exports_file ${wl}$export_symbols -o $lib' - ) - LDFLAGS="$save_LDFLAGS" - else - _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib' - _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -exports_file $export_symbols -o $lib' - fi - _LT_TAGVAR(archive_cmds_need_lc, $1)='no' - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' - _LT_TAGVAR(hardcode_libdir_separator, $1)=: - _LT_TAGVAR(inherit_rpath, $1)=yes - _LT_TAGVAR(link_all_deplibs, $1)=yes - ;; - - netbsd*) - if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then - _LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' # a.out - else - _LT_TAGVAR(archive_cmds, $1)='$LD -shared -o $lib $libobjs $deplibs $linker_flags' # ELF - fi - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' - _LT_TAGVAR(hardcode_direct, $1)=yes - _LT_TAGVAR(hardcode_shlibpath_var, $1)=no - ;; - - newsos6) - _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' - _LT_TAGVAR(hardcode_direct, $1)=yes - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' - _LT_TAGVAR(hardcode_libdir_separator, $1)=: - _LT_TAGVAR(hardcode_shlibpath_var, $1)=no - ;; - - *nto* | *qnx*) - ;; - - openbsd*) - if test -f /usr/libexec/ld.so; then - _LT_TAGVAR(hardcode_direct, $1)=yes - _LT_TAGVAR(hardcode_shlibpath_var, $1)=no - _LT_TAGVAR(hardcode_direct_absolute, $1)=yes - if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then - _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags' - _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-retain-symbols-file,$export_symbols' - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' - _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' - else - case $host_os in - openbsd[[01]].* | openbsd2.[[0-7]] | openbsd2.[[0-7]].*) - _LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' - ;; - *) - _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags' - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' - ;; - esac - fi - else - _LT_TAGVAR(ld_shlibs, $1)=no - fi - ;; - - os2*) - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' - _LT_TAGVAR(hardcode_minus_L, $1)=yes - _LT_TAGVAR(allow_undefined_flag, $1)=unsupported - _LT_TAGVAR(archive_cmds, $1)='$ECHO "LIBRARY $libname INITINSTANCE" > $output_objdir/$libname.def~$ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~$ECHO DATA >> $output_objdir/$libname.def~$ECHO " SINGLE NONSHARED" >> $output_objdir/$libname.def~$ECHO EXPORTS >> $output_objdir/$libname.def~emxexp $libobjs >> $output_objdir/$libname.def~$CC -Zdll -Zcrtdll -o $lib $libobjs $deplibs $compiler_flags $output_objdir/$libname.def' - _LT_TAGVAR(old_archive_from_new_cmds, $1)='emximp -o $output_objdir/$libname.a $output_objdir/$libname.def' - ;; - - osf3*) - if test "$GCC" = yes; then - _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*' - _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' - else - _LT_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*' - _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib' - fi - _LT_TAGVAR(archive_cmds_need_lc, $1)='no' - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' - _LT_TAGVAR(hardcode_libdir_separator, $1)=: - ;; - - osf4* | osf5*) # as osf3* with the addition of -msym flag - if test "$GCC" = yes; then - _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*' - _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' - else - _LT_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*' - _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags -msym -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib' - _LT_TAGVAR(archive_expsym_cmds, $1)='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done; printf "%s\\n" "-hidden">> $lib.exp~ - $CC -shared${allow_undefined_flag} ${wl}-input ${wl}$lib.exp $compiler_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib~$RM $lib.exp' - - # Both c and cxx compiler support -rpath directly - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir' - fi - _LT_TAGVAR(archive_cmds_need_lc, $1)='no' - _LT_TAGVAR(hardcode_libdir_separator, $1)=: - ;; - - solaris*) - _LT_TAGVAR(no_undefined_flag, $1)=' -z defs' - if test "$GCC" = yes; then - wlarc='${wl}' - _LT_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-z ${wl}text ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' - _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~ - $CC -shared ${wl}-z ${wl}text ${wl}-M ${wl}$lib.exp ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp' - else - case `$CC -V 2>&1` in - *"Compilers 5.0"*) - wlarc='' - _LT_TAGVAR(archive_cmds, $1)='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags' - _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~ - $LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$RM $lib.exp' - ;; - *) - wlarc='${wl}' - _LT_TAGVAR(archive_cmds, $1)='$CC -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $compiler_flags' - _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~ - $CC -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp' - ;; - esac - fi - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' - _LT_TAGVAR(hardcode_shlibpath_var, $1)=no - case $host_os in - solaris2.[[0-5]] | solaris2.[[0-5]].*) ;; - *) - # The compiler driver will combine and reorder linker options, - # but understands `-z linker_flag'. GCC discards it without `$wl', - # but is careful enough not to reorder. - # Supported since Solaris 2.6 (maybe 2.5.1?) - if test "$GCC" = yes; then - _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}-z ${wl}allextract$convenience ${wl}-z ${wl}defaultextract' - else - _LT_TAGVAR(whole_archive_flag_spec, $1)='-z allextract$convenience -z defaultextract' - fi - ;; - esac - _LT_TAGVAR(link_all_deplibs, $1)=yes - ;; - - sunos4*) - if test "x$host_vendor" = xsequent; then - # Use $CC to link under sequent, because it throws in some extra .o - # files that make .init and .fini sections work. - _LT_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h $soname -o $lib $libobjs $deplibs $compiler_flags' - else - _LT_TAGVAR(archive_cmds, $1)='$LD -assert pure-text -Bstatic -o $lib $libobjs $deplibs $linker_flags' - fi - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' - _LT_TAGVAR(hardcode_direct, $1)=yes - _LT_TAGVAR(hardcode_minus_L, $1)=yes - _LT_TAGVAR(hardcode_shlibpath_var, $1)=no - ;; - - sysv4) - case $host_vendor in - sni) - _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' - _LT_TAGVAR(hardcode_direct, $1)=yes # is this really true??? - ;; - siemens) - ## LD is ld it makes a PLAMLIB - ## CC just makes a GrossModule. - _LT_TAGVAR(archive_cmds, $1)='$LD -G -o $lib $libobjs $deplibs $linker_flags' - _LT_TAGVAR(reload_cmds, $1)='$CC -r -o $output$reload_objs' - _LT_TAGVAR(hardcode_direct, $1)=no - ;; - motorola) - _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' - _LT_TAGVAR(hardcode_direct, $1)=no #Motorola manual says yes, but my tests say they lie - ;; - esac - runpath_var='LD_RUN_PATH' - _LT_TAGVAR(hardcode_shlibpath_var, $1)=no - ;; - - sysv4.3*) - _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' - _LT_TAGVAR(hardcode_shlibpath_var, $1)=no - _LT_TAGVAR(export_dynamic_flag_spec, $1)='-Bexport' - ;; - - sysv4*MP*) - if test -d /usr/nec; then - _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' - _LT_TAGVAR(hardcode_shlibpath_var, $1)=no - runpath_var=LD_RUN_PATH - hardcode_runpath_var=yes - _LT_TAGVAR(ld_shlibs, $1)=yes - fi - ;; - - sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[[01]].[[10]]* | unixware7* | sco3.2v5.0.[[024]]*) - _LT_TAGVAR(no_undefined_flag, $1)='${wl}-z,text' - _LT_TAGVAR(archive_cmds_need_lc, $1)=no - _LT_TAGVAR(hardcode_shlibpath_var, $1)=no - runpath_var='LD_RUN_PATH' - - if test "$GCC" = yes; then - _LT_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' - _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' - else - _LT_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' - _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' - fi - ;; - - sysv5* | sco3.2v5* | sco5v6*) - # Note: We can NOT use -z defs as we might desire, because we do not - # link with -lc, and that would cause any symbols used from libc to - # always be unresolved, which means just about no library would - # ever link correctly. If we're not using GNU ld we use -z text - # though, which does catch some bad symbols but isn't as heavy-handed - # as -z defs. - _LT_TAGVAR(no_undefined_flag, $1)='${wl}-z,text' - _LT_TAGVAR(allow_undefined_flag, $1)='${wl}-z,nodefs' - _LT_TAGVAR(archive_cmds_need_lc, $1)=no - _LT_TAGVAR(hardcode_shlibpath_var, $1)=no - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R,$libdir' - _LT_TAGVAR(hardcode_libdir_separator, $1)=':' - _LT_TAGVAR(link_all_deplibs, $1)=yes - _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-Bexport' - runpath_var='LD_RUN_PATH' - - if test "$GCC" = yes; then - _LT_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' - _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' - else - _LT_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' - _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' - fi - ;; - - uts4*) - _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' - _LT_TAGVAR(hardcode_shlibpath_var, $1)=no - ;; - - *) - _LT_TAGVAR(ld_shlibs, $1)=no - ;; - esac - - if test x$host_vendor = xsni; then - case $host in - sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*) - _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-Blargedynsym' - ;; - esac - fi - fi -]) -AC_MSG_RESULT([$_LT_TAGVAR(ld_shlibs, $1)]) -test "$_LT_TAGVAR(ld_shlibs, $1)" = no && can_build_shared=no - -_LT_TAGVAR(with_gnu_ld, $1)=$with_gnu_ld - -_LT_DECL([], [libext], [0], [Old archive suffix (normally "a")])dnl -_LT_DECL([], [shrext_cmds], [1], [Shared library suffix (normally ".so")])dnl -_LT_DECL([], [extract_expsyms_cmds], [2], - [The commands to extract the exported symbol list from a shared archive]) - -# -# Do we need to explicitly link libc? -# -case "x$_LT_TAGVAR(archive_cmds_need_lc, $1)" in -x|xyes) - # Assume -lc should be added - _LT_TAGVAR(archive_cmds_need_lc, $1)=yes - - if test "$enable_shared" = yes && test "$GCC" = yes; then - case $_LT_TAGVAR(archive_cmds, $1) in - *'~'*) - # FIXME: we may have to deal with multi-command sequences. - ;; - '$CC '*) - # Test whether the compiler implicitly links with -lc since on some - # systems, -lgcc has to come before -lc. If gcc already passes -lc - # to ld, don't add -lc before -lgcc. - AC_MSG_CHECKING([whether -lc should be explicitly linked in]) - $RM conftest* - echo "$lt_simple_compile_test_code" > conftest.$ac_ext - - if AC_TRY_EVAL(ac_compile) 2>conftest.err; then - soname=conftest - lib=conftest - libobjs=conftest.$ac_objext - deplibs= - wl=$_LT_TAGVAR(lt_prog_compiler_wl, $1) - pic_flag=$_LT_TAGVAR(lt_prog_compiler_pic, $1) - compiler_flags=-v - linker_flags=-v - verstring= - output_objdir=. - libname=conftest - lt_save_allow_undefined_flag=$_LT_TAGVAR(allow_undefined_flag, $1) - _LT_TAGVAR(allow_undefined_flag, $1)= - if AC_TRY_EVAL(_LT_TAGVAR(archive_cmds, $1) 2\>\&1 \| $GREP \" -lc \" \>/dev/null 2\>\&1) - then - _LT_TAGVAR(archive_cmds_need_lc, $1)=no - else - _LT_TAGVAR(archive_cmds_need_lc, $1)=yes - fi - _LT_TAGVAR(allow_undefined_flag, $1)=$lt_save_allow_undefined_flag - else - cat conftest.err 1>&5 - fi - $RM conftest* - AC_MSG_RESULT([$_LT_TAGVAR(archive_cmds_need_lc, $1)]) - ;; - esac - fi - ;; -esac - -_LT_TAGDECL([build_libtool_need_lc], [archive_cmds_need_lc], [0], - [Whether or not to add -lc for building shared libraries]) -_LT_TAGDECL([allow_libtool_libs_with_static_runtimes], - [enable_shared_with_static_runtimes], [0], - [Whether or not to disallow shared libs when runtime libs are static]) -_LT_TAGDECL([], [export_dynamic_flag_spec], [1], - [Compiler flag to allow reflexive dlopens]) -_LT_TAGDECL([], [whole_archive_flag_spec], [1], - [Compiler flag to generate shared objects directly from archives]) -_LT_TAGDECL([], [compiler_needs_object], [1], - [Whether the compiler copes with passing no objects directly]) -_LT_TAGDECL([], [old_archive_from_new_cmds], [2], - [Create an old-style archive from a shared archive]) -_LT_TAGDECL([], [old_archive_from_expsyms_cmds], [2], - [Create a temporary old-style archive to link instead of a shared archive]) -_LT_TAGDECL([], [archive_cmds], [2], [Commands used to build a shared archive]) -_LT_TAGDECL([], [archive_expsym_cmds], [2]) -_LT_TAGDECL([], [module_cmds], [2], - [Commands used to build a loadable module if different from building - a shared archive.]) -_LT_TAGDECL([], [module_expsym_cmds], [2]) -_LT_TAGDECL([], [with_gnu_ld], [1], - [Whether we are building with GNU ld or not]) -_LT_TAGDECL([], [allow_undefined_flag], [1], - [Flag that allows shared libraries with undefined symbols to be built]) -_LT_TAGDECL([], [no_undefined_flag], [1], - [Flag that enforces no undefined symbols]) -_LT_TAGDECL([], [hardcode_libdir_flag_spec], [1], - [Flag to hardcode $libdir into a binary during linking. - This must work even if $libdir does not exist]) -_LT_TAGDECL([], [hardcode_libdir_flag_spec_ld], [1], - [[If ld is used when linking, flag to hardcode $libdir into a binary - during linking. This must work even if $libdir does not exist]]) -_LT_TAGDECL([], [hardcode_libdir_separator], [1], - [Whether we need a single "-rpath" flag with a separated argument]) -_LT_TAGDECL([], [hardcode_direct], [0], - [Set to "yes" if using DIR/libNAME${shared_ext} during linking hardcodes - DIR into the resulting binary]) -_LT_TAGDECL([], [hardcode_direct_absolute], [0], - [Set to "yes" if using DIR/libNAME${shared_ext} during linking hardcodes - DIR into the resulting binary and the resulting library dependency is - "absolute", i.e impossible to change by setting ${shlibpath_var} if the - library is relocated]) -_LT_TAGDECL([], [hardcode_minus_L], [0], - [Set to "yes" if using the -LDIR flag during linking hardcodes DIR - into the resulting binary]) -_LT_TAGDECL([], [hardcode_shlibpath_var], [0], - [Set to "yes" if using SHLIBPATH_VAR=DIR during linking hardcodes DIR - into the resulting binary]) -_LT_TAGDECL([], [hardcode_automatic], [0], - [Set to "yes" if building a shared library automatically hardcodes DIR - into the library and all subsequent libraries and executables linked - against it]) -_LT_TAGDECL([], [inherit_rpath], [0], - [Set to yes if linker adds runtime paths of dependent libraries - to runtime path list]) -_LT_TAGDECL([], [link_all_deplibs], [0], - [Whether libtool must link a program against all its dependency libraries]) -_LT_TAGDECL([], [fix_srcfile_path], [1], - [Fix the shell variable $srcfile for the compiler]) -_LT_TAGDECL([], [always_export_symbols], [0], - [Set to "yes" if exported symbols are required]) -_LT_TAGDECL([], [export_symbols_cmds], [2], - [The commands to list exported symbols]) -_LT_TAGDECL([], [exclude_expsyms], [1], - [Symbols that should not be listed in the preloaded symbols]) -_LT_TAGDECL([], [include_expsyms], [1], - [Symbols that must always be exported]) -_LT_TAGDECL([], [prelink_cmds], [2], - [Commands necessary for linking programs (against libraries) with templates]) -_LT_TAGDECL([], [file_list_spec], [1], - [Specify filename containing input files]) -dnl FIXME: Not yet implemented -dnl _LT_TAGDECL([], [thread_safe_flag_spec], [1], -dnl [Compiler flag to generate thread safe objects]) -])# _LT_LINKER_SHLIBS - - -# _LT_LANG_C_CONFIG([TAG]) -# ------------------------ -# Ensure that the configuration variables for a C compiler are suitably -# defined. These variables are subsequently used by _LT_CONFIG to write -# the compiler configuration to `libtool'. -m4_defun([_LT_LANG_C_CONFIG], -[m4_require([_LT_DECL_EGREP])dnl -lt_save_CC="$CC" -AC_LANG_PUSH(C) - -# Source file extension for C test sources. -ac_ext=c - -# Object file extension for compiled C test sources. -objext=o -_LT_TAGVAR(objext, $1)=$objext - -# Code to be used in simple compile tests -lt_simple_compile_test_code="int some_variable = 0;" - -# Code to be used in simple link tests -lt_simple_link_test_code='int main(){return(0);}' - -_LT_TAG_COMPILER -# Save the default compiler, since it gets overwritten when the other -# tags are being tested, and _LT_TAGVAR(compiler, []) is a NOP. -compiler_DEFAULT=$CC - -# save warnings/boilerplate of simple test code -_LT_COMPILER_BOILERPLATE -_LT_LINKER_BOILERPLATE - -if test -n "$compiler"; then - _LT_COMPILER_NO_RTTI($1) - _LT_COMPILER_PIC($1) - _LT_COMPILER_C_O($1) - _LT_COMPILER_FILE_LOCKS($1) - _LT_LINKER_SHLIBS($1) - _LT_SYS_DYNAMIC_LINKER($1) - _LT_LINKER_HARDCODE_LIBPATH($1) - LT_SYS_DLOPEN_SELF - _LT_CMD_STRIPLIB - - # Report which library types will actually be built - AC_MSG_CHECKING([if libtool supports shared libraries]) - AC_MSG_RESULT([$can_build_shared]) - - AC_MSG_CHECKING([whether to build shared libraries]) - test "$can_build_shared" = "no" && enable_shared=no - - # On AIX, shared libraries and static libraries use the same namespace, and - # are all built from PIC. - case $host_os in - aix3*) - test "$enable_shared" = yes && enable_static=no - if test -n "$RANLIB"; then - archive_cmds="$archive_cmds~\$RANLIB \$lib" - postinstall_cmds='$RANLIB $lib' - fi - ;; - - aix[[4-9]]*) - if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then - test "$enable_shared" = yes && enable_static=no - fi - ;; - esac - AC_MSG_RESULT([$enable_shared]) - - AC_MSG_CHECKING([whether to build static libraries]) - # Make sure either enable_shared or enable_static is yes. - test "$enable_shared" = yes || enable_static=yes - AC_MSG_RESULT([$enable_static]) - - _LT_CONFIG($1) -fi -AC_LANG_POP -CC="$lt_save_CC" -])# _LT_LANG_C_CONFIG - - -# _LT_PROG_CXX -# ------------ -# Since AC_PROG_CXX is broken, in that it returns g++ if there is no c++ -# compiler, we have our own version here. -m4_defun([_LT_PROG_CXX], -[ -pushdef([AC_MSG_ERROR], [_lt_caught_CXX_error=yes]) -AC_PROG_CXX -if test -n "$CXX" && ( test "X$CXX" != "Xno" && - ( (test "X$CXX" = "Xg++" && `g++ -v >/dev/null 2>&1` ) || - (test "X$CXX" != "Xg++"))) ; then - AC_PROG_CXXCPP -else - _lt_caught_CXX_error=yes -fi -popdef([AC_MSG_ERROR]) -])# _LT_PROG_CXX - -dnl aclocal-1.4 backwards compatibility: -dnl AC_DEFUN([_LT_PROG_CXX], []) - - -# _LT_LANG_CXX_CONFIG([TAG]) -# -------------------------- -# Ensure that the configuration variables for a C++ compiler are suitably -# defined. These variables are subsequently used by _LT_CONFIG to write -# the compiler configuration to `libtool'. -m4_defun([_LT_LANG_CXX_CONFIG], -[AC_REQUIRE([_LT_PROG_CXX])dnl -m4_require([_LT_FILEUTILS_DEFAULTS])dnl -m4_require([_LT_DECL_EGREP])dnl - -AC_LANG_PUSH(C++) -_LT_TAGVAR(archive_cmds_need_lc, $1)=no -_LT_TAGVAR(allow_undefined_flag, $1)= -_LT_TAGVAR(always_export_symbols, $1)=no -_LT_TAGVAR(archive_expsym_cmds, $1)= -_LT_TAGVAR(compiler_needs_object, $1)=no -_LT_TAGVAR(export_dynamic_flag_spec, $1)= -_LT_TAGVAR(hardcode_direct, $1)=no -_LT_TAGVAR(hardcode_direct_absolute, $1)=no -_LT_TAGVAR(hardcode_libdir_flag_spec, $1)= -_LT_TAGVAR(hardcode_libdir_flag_spec_ld, $1)= -_LT_TAGVAR(hardcode_libdir_separator, $1)= -_LT_TAGVAR(hardcode_minus_L, $1)=no -_LT_TAGVAR(hardcode_shlibpath_var, $1)=unsupported -_LT_TAGVAR(hardcode_automatic, $1)=no -_LT_TAGVAR(inherit_rpath, $1)=no -_LT_TAGVAR(module_cmds, $1)= -_LT_TAGVAR(module_expsym_cmds, $1)= -_LT_TAGVAR(link_all_deplibs, $1)=unknown -_LT_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds -_LT_TAGVAR(no_undefined_flag, $1)= -_LT_TAGVAR(whole_archive_flag_spec, $1)= -_LT_TAGVAR(enable_shared_with_static_runtimes, $1)=no - -# Source file extension for C++ test sources. -ac_ext=cpp - -# Object file extension for compiled C++ test sources. -objext=o -_LT_TAGVAR(objext, $1)=$objext - -# No sense in running all these tests if we already determined that -# the CXX compiler isn't working. Some variables (like enable_shared) -# are currently assumed to apply to all compilers on this platform, -# and will be corrupted by setting them based on a non-working compiler. -if test "$_lt_caught_CXX_error" != yes; then - # Code to be used in simple compile tests - lt_simple_compile_test_code="int some_variable = 0;" - - # Code to be used in simple link tests - lt_simple_link_test_code='int main(int, char *[[]]) { return(0); }' - - # ltmain only uses $CC for tagged configurations so make sure $CC is set. - _LT_TAG_COMPILER - - # save warnings/boilerplate of simple test code - _LT_COMPILER_BOILERPLATE - _LT_LINKER_BOILERPLATE - - # Allow CC to be a program name with arguments. - lt_save_CC=$CC - lt_save_LD=$LD - lt_save_GCC=$GCC - GCC=$GXX - lt_save_with_gnu_ld=$with_gnu_ld - lt_save_path_LD=$lt_cv_path_LD - if test -n "${lt_cv_prog_gnu_ldcxx+set}"; then - lt_cv_prog_gnu_ld=$lt_cv_prog_gnu_ldcxx - else - $as_unset lt_cv_prog_gnu_ld - fi - if test -n "${lt_cv_path_LDCXX+set}"; then - lt_cv_path_LD=$lt_cv_path_LDCXX - else - $as_unset lt_cv_path_LD - fi - test -z "${LDCXX+set}" || LD=$LDCXX - CC=${CXX-"c++"} - compiler=$CC - _LT_TAGVAR(compiler, $1)=$CC - _LT_CC_BASENAME([$compiler]) - - if test -n "$compiler"; then - # We don't want -fno-exception when compiling C++ code, so set the - # no_builtin_flag separately - if test "$GXX" = yes; then - _LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=' -fno-builtin' - else - _LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)= - fi - - if test "$GXX" = yes; then - # Set up default GNU C++ configuration - - LT_PATH_LD - - # Check if GNU C++ uses GNU ld as the underlying linker, since the - # archiving commands below assume that GNU ld is being used. - if test "$with_gnu_ld" = yes; then - _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib' - _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' - - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' - _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic' - - # If archive_cmds runs LD, not CC, wlarc should be empty - # XXX I think wlarc can be eliminated in ltcf-cxx, but I need to - # investigate it a little bit more. (MM) - wlarc='${wl}' - - # ancient GNU ld didn't support --whole-archive et. al. - if eval "`$CC -print-prog-name=ld` --help 2>&1" | - $GREP 'no-whole-archive' > /dev/null; then - _LT_TAGVAR(whole_archive_flag_spec, $1)="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive' - else - _LT_TAGVAR(whole_archive_flag_spec, $1)= - fi - else - with_gnu_ld=no - wlarc= - - # A generic and very simple default shared library creation - # command for GNU C++ for the case where it uses the native - # linker, instead of GNU ld. If possible, this setting should - # overridden to take advantage of the native linker features on - # the platform it is being used on. - _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $lib' - fi - - # Commands to make compiler produce verbose output that lists - # what "hidden" libraries, object files and flags are used when - # linking a shared library. - output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "\-L"' - - else - GXX=no - with_gnu_ld=no - wlarc= - fi - - # PORTME: fill in a description of your system's C++ link characteristics - AC_MSG_CHECKING([whether the $compiler linker ($LD) supports shared libraries]) - _LT_TAGVAR(ld_shlibs, $1)=yes - case $host_os in - aix3*) - # FIXME: insert proper C++ library support - _LT_TAGVAR(ld_shlibs, $1)=no - ;; - aix[[4-9]]*) - if test "$host_cpu" = ia64; then - # On IA64, the linker does run time linking by default, so we don't - # have to do anything special. - aix_use_runtimelinking=no - exp_sym_flag='-Bexport' - no_entry_flag="" - else - aix_use_runtimelinking=no - - # Test if we are trying to use run time linking or normal - # AIX style linking. If -brtl is somewhere in LDFLAGS, we - # need to do runtime linking. - case $host_os in aix4.[[23]]|aix4.[[23]].*|aix[[5-9]]*) - for ld_flag in $LDFLAGS; do - case $ld_flag in - *-brtl*) - aix_use_runtimelinking=yes - break - ;; - esac - done - ;; - esac - - exp_sym_flag='-bexport' - no_entry_flag='-bnoentry' - fi - - # When large executables or shared objects are built, AIX ld can - # have problems creating the table of contents. If linking a library - # or program results in "error TOC overflow" add -mminimal-toc to - # CXXFLAGS/CFLAGS for g++/gcc. In the cases where that is not - # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS. - - _LT_TAGVAR(archive_cmds, $1)='' - _LT_TAGVAR(hardcode_direct, $1)=yes - _LT_TAGVAR(hardcode_direct_absolute, $1)=yes - _LT_TAGVAR(hardcode_libdir_separator, $1)=':' - _LT_TAGVAR(link_all_deplibs, $1)=yes - _LT_TAGVAR(file_list_spec, $1)='${wl}-f,' - - if test "$GXX" = yes; then - case $host_os in aix4.[[012]]|aix4.[[012]].*) - # We only want to do this on AIX 4.2 and lower, the check - # below for broken collect2 doesn't work under 4.3+ - collect2name=`${CC} -print-prog-name=collect2` - if test -f "$collect2name" && - strings "$collect2name" | $GREP resolve_lib_name >/dev/null - then - # We have reworked collect2 - : - else - # We have old collect2 - _LT_TAGVAR(hardcode_direct, $1)=unsupported - # It fails to find uninstalled libraries when the uninstalled - # path is not listed in the libpath. Setting hardcode_minus_L - # to unsupported forces relinking - _LT_TAGVAR(hardcode_minus_L, $1)=yes - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' - _LT_TAGVAR(hardcode_libdir_separator, $1)= - fi - esac - shared_flag='-shared' - if test "$aix_use_runtimelinking" = yes; then - shared_flag="$shared_flag "'${wl}-G' - fi - else - # not using gcc - if test "$host_cpu" = ia64; then - # VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release - # chokes on -Wl,-G. The following line is correct: - shared_flag='-G' - else - if test "$aix_use_runtimelinking" = yes; then - shared_flag='${wl}-G' - else - shared_flag='${wl}-bM:SRE' - fi - fi - fi - - _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-bexpall' - # It seems that -bexpall does not export symbols beginning with - # underscore (_), so it is better to generate a list of symbols to - # export. - _LT_TAGVAR(always_export_symbols, $1)=yes - if test "$aix_use_runtimelinking" = yes; then - # Warning - without using the other runtime loading flags (-brtl), - # -berok will link without error, but may produce a broken library. - _LT_TAGVAR(allow_undefined_flag, $1)='-berok' - # Determine the default libpath from the value encoded in an empty - # executable. - _LT_SYS_MODULE_PATH_AIX - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath" - - _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then $ECHO "X${wl}${allow_undefined_flag}" | $Xsed; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag" - else - if test "$host_cpu" = ia64; then - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $libdir:/usr/lib:/lib' - _LT_TAGVAR(allow_undefined_flag, $1)="-z nodefs" - _LT_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$exp_sym_flag:\$export_symbols" - else - # Determine the default libpath from the value encoded in an - # empty executable. - _LT_SYS_MODULE_PATH_AIX - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath" - # Warning - without using the other run time loading flags, - # -berok will link without error, but may produce a broken library. - _LT_TAGVAR(no_undefined_flag, $1)=' ${wl}-bernotok' - _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-berok' - # Exported symbols can be pulled into shared objects from archives - _LT_TAGVAR(whole_archive_flag_spec, $1)='$convenience' - _LT_TAGVAR(archive_cmds_need_lc, $1)=yes - # This is similar to how AIX traditionally builds its shared - # libraries. - _LT_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname' - fi - fi - ;; - - beos*) - if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then - _LT_TAGVAR(allow_undefined_flag, $1)=unsupported - # Joseph Beckenbach <jrb3@best.com> says some releases of gcc - # support --undefined. This deserves some investigation. FIXME - _LT_TAGVAR(archive_cmds, $1)='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' - else - _LT_TAGVAR(ld_shlibs, $1)=no - fi - ;; - - chorus*) - case $cc_basename in - *) - # FIXME: insert proper C++ library support - _LT_TAGVAR(ld_shlibs, $1)=no - ;; - esac - ;; - - cygwin* | mingw* | pw32* | cegcc*) - # _LT_TAGVAR(hardcode_libdir_flag_spec, $1) is actually meaningless, - # as there is no search path for DLLs. - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' - _LT_TAGVAR(allow_undefined_flag, $1)=unsupported - _LT_TAGVAR(always_export_symbols, $1)=no - _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes - - if $LD --help 2>&1 | $GREP 'auto-import' > /dev/null; then - _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' - # If the export-symbols file already is a .def file (1st line - # is EXPORTS), use it as is; otherwise, prepend... - _LT_TAGVAR(archive_expsym_cmds, $1)='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then - cp $export_symbols $output_objdir/$soname.def; - else - echo EXPORTS > $output_objdir/$soname.def; - cat $export_symbols >> $output_objdir/$soname.def; - fi~ - $CC -shared -nostdlib $output_objdir/$soname.def $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' - else - _LT_TAGVAR(ld_shlibs, $1)=no - fi - ;; - darwin* | rhapsody*) - _LT_DARWIN_LINKER_FEATURES($1) - ;; - - dgux*) - case $cc_basename in - ec++*) - # FIXME: insert proper C++ library support - _LT_TAGVAR(ld_shlibs, $1)=no - ;; - ghcx*) - # Green Hills C++ Compiler - # FIXME: insert proper C++ library support - _LT_TAGVAR(ld_shlibs, $1)=no - ;; - *) - # FIXME: insert proper C++ library support - _LT_TAGVAR(ld_shlibs, $1)=no - ;; - esac - ;; - - freebsd[[12]]*) - # C++ shared libraries reported to be fairly broken before - # switch to ELF - _LT_TAGVAR(ld_shlibs, $1)=no - ;; - - freebsd-elf*) - _LT_TAGVAR(archive_cmds_need_lc, $1)=no - ;; - - freebsd* | dragonfly*) - # FreeBSD 3 and later use GNU C++ and GNU ld with standard ELF - # conventions - _LT_TAGVAR(ld_shlibs, $1)=yes - ;; - - gnu*) - ;; - - hpux9*) - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir' - _LT_TAGVAR(hardcode_libdir_separator, $1)=: - _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' - _LT_TAGVAR(hardcode_direct, $1)=yes - _LT_TAGVAR(hardcode_minus_L, $1)=yes # Not in the search PATH, - # but as the default - # location of the library. - - case $cc_basename in - CC*) - # FIXME: insert proper C++ library support - _LT_TAGVAR(ld_shlibs, $1)=no - ;; - aCC*) - _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/$soname~$CC -b ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' - # Commands to make compiler produce verbose output that lists - # what "hidden" libraries, object files and flags are used when - # linking a shared library. - # - # There doesn't appear to be a way to prevent this compiler from - # explicitly linking system object files so we need to strip them - # from the output so that they don't get included in the library - # dependencies. - output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | $EGREP "\-L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; $ECHO "X$list" | $Xsed' - ;; - *) - if test "$GXX" = yes; then - _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/$soname~$CC -shared -nostdlib -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' - else - # FIXME: insert proper C++ library support - _LT_TAGVAR(ld_shlibs, $1)=no - fi - ;; - esac - ;; - - hpux10*|hpux11*) - if test $with_gnu_ld = no; then - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir' - _LT_TAGVAR(hardcode_libdir_separator, $1)=: - - case $host_cpu in - hppa*64*|ia64*) - ;; - *) - _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' - ;; - esac - fi - case $host_cpu in - hppa*64*|ia64*) - _LT_TAGVAR(hardcode_direct, $1)=no - _LT_TAGVAR(hardcode_shlibpath_var, $1)=no - ;; - *) - _LT_TAGVAR(hardcode_direct, $1)=yes - _LT_TAGVAR(hardcode_direct_absolute, $1)=yes - _LT_TAGVAR(hardcode_minus_L, $1)=yes # Not in the search PATH, - # but as the default - # location of the library. - ;; - esac - - case $cc_basename in - CC*) - # FIXME: insert proper C++ library support - _LT_TAGVAR(ld_shlibs, $1)=no - ;; - aCC*) - case $host_cpu in - hppa*64*) - _LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' - ;; - ia64*) - _LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' - ;; - *) - _LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' - ;; - esac - # Commands to make compiler produce verbose output that lists - # what "hidden" libraries, object files and flags are used when - # linking a shared library. - # - # There doesn't appear to be a way to prevent this compiler from - # explicitly linking system object files so we need to strip them - # from the output so that they don't get included in the library - # dependencies. - output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | $GREP "\-L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; $ECHO "X$list" | $Xsed' - ;; - *) - if test "$GXX" = yes; then - if test $with_gnu_ld = no; then - case $host_cpu in - hppa*64*) - _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' - ;; - ia64*) - _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' - ;; - *) - _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' - ;; - esac - fi - else - # FIXME: insert proper C++ library support - _LT_TAGVAR(ld_shlibs, $1)=no - fi - ;; - esac - ;; - - interix[[3-9]]*) - _LT_TAGVAR(hardcode_direct, $1)=no - _LT_TAGVAR(hardcode_shlibpath_var, $1)=no - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' - _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' - # Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc. - # Instead, shared libraries are loaded at an image base (0x10000000 by - # default) and relocated if they conflict, which is a slow very memory - # consuming and fragmenting process. To avoid this, we pick a random, - # 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link - # time. Moving up from 0x10000000 also allows more sbrk(2) space. - _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' - _LT_TAGVAR(archive_expsym_cmds, $1)='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' - ;; - irix5* | irix6*) - case $cc_basename in - CC*) - # SGI C++ - _LT_TAGVAR(archive_cmds, $1)='$CC -shared -all -multigot $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib' - - # Archives containing C++ object files must be created using - # "CC -ar", where "CC" is the IRIX C++ compiler. This is - # necessary to make sure instantiated templates are included - # in the archive. - _LT_TAGVAR(old_archive_cmds, $1)='$CC -ar -WR,-u -o $oldlib $oldobjs' - ;; - *) - if test "$GXX" = yes; then - if test "$with_gnu_ld" = no; then - _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' - else - _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` -o $lib' - fi - fi - _LT_TAGVAR(link_all_deplibs, $1)=yes - ;; - esac - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' - _LT_TAGVAR(hardcode_libdir_separator, $1)=: - _LT_TAGVAR(inherit_rpath, $1)=yes - ;; - - linux* | k*bsd*-gnu) - case $cc_basename in - KCC*) - # Kuck and Associates, Inc. (KAI) C++ Compiler - - # KCC will only create a shared library if the output file - # ends with ".so" (or ".sl" for HP-UX), so rename the library - # to its proper name (with version) after linking. - _LT_TAGVAR(archive_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib' - _LT_TAGVAR(archive_expsym_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib ${wl}-retain-symbols-file,$export_symbols; mv \$templib $lib' - # Commands to make compiler produce verbose output that lists - # what "hidden" libraries, object files and flags are used when - # linking a shared library. - # - # There doesn't appear to be a way to prevent this compiler from - # explicitly linking system object files so we need to strip them - # from the output so that they don't get included in the library - # dependencies. - output_verbose_link_cmd='templist=`$CC $CFLAGS -v conftest.$objext -o libconftest$shared_ext 2>&1 | $GREP "ld"`; rm -f libconftest$shared_ext; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; $ECHO "X$list" | $Xsed' - - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' - _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic' - - # Archives containing C++ object files must be created using - # "CC -Bstatic", where "CC" is the KAI C++ compiler. - _LT_TAGVAR(old_archive_cmds, $1)='$CC -Bstatic -o $oldlib $oldobjs' - ;; - icpc* | ecpc* ) - # Intel C++ - with_gnu_ld=yes - # version 8.0 and above of icpc choke on multiply defined symbols - # if we add $predep_objects and $postdep_objects, however 7.1 and - # earlier do not add the objects themselves. - case `$CC -V 2>&1` in - *"Version 7."*) - _LT_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib' - _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' - ;; - *) # Version 8.0 or newer - tmp_idyn= - case $host_cpu in - ia64*) tmp_idyn=' -i_dynamic';; - esac - _LT_TAGVAR(archive_cmds, $1)='$CC -shared'"$tmp_idyn"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' - _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared'"$tmp_idyn"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' - ;; - esac - _LT_TAGVAR(archive_cmds_need_lc, $1)=no - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' - _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic' - _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive$convenience ${wl}--no-whole-archive' - ;; - pgCC* | pgcpp*) - # Portland Group C++ compiler - case `$CC -V` in - *pgCC\ [[1-5]]* | *pgcpp\ [[1-5]]*) - _LT_TAGVAR(prelink_cmds, $1)='tpldir=Template.dir~ - rm -rf $tpldir~ - $CC --prelink_objects --instantiation_dir $tpldir $objs $libobjs $compile_deplibs~ - compile_command="$compile_command `find $tpldir -name \*.o | $NL2SP`"' - _LT_TAGVAR(old_archive_cmds, $1)='tpldir=Template.dir~ - rm -rf $tpldir~ - $CC --prelink_objects --instantiation_dir $tpldir $oldobjs$old_deplibs~ - $AR $AR_FLAGS $oldlib$oldobjs$old_deplibs `find $tpldir -name \*.o | $NL2SP`~ - $RANLIB $oldlib' - _LT_TAGVAR(archive_cmds, $1)='tpldir=Template.dir~ - rm -rf $tpldir~ - $CC --prelink_objects --instantiation_dir $tpldir $predep_objects $libobjs $deplibs $convenience $postdep_objects~ - $CC -shared $pic_flag $predep_objects $libobjs $deplibs `find $tpldir -name \*.o | $NL2SP` $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname -o $lib' - _LT_TAGVAR(archive_expsym_cmds, $1)='tpldir=Template.dir~ - rm -rf $tpldir~ - $CC --prelink_objects --instantiation_dir $tpldir $predep_objects $libobjs $deplibs $convenience $postdep_objects~ - $CC -shared $pic_flag $predep_objects $libobjs $deplibs `find $tpldir -name \*.o | $NL2SP` $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname ${wl}-retain-symbols-file ${wl}$export_symbols -o $lib' - ;; - *) # Version 6 will use weak symbols - _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname -o $lib' - _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname ${wl}-retain-symbols-file ${wl}$export_symbols -o $lib' - ;; - esac - - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}--rpath ${wl}$libdir' - _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic' - _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $ECHO \"$new_convenience\"` ${wl}--no-whole-archive' - ;; - cxx*) - # Compaq C++ - _LT_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib' - _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib ${wl}-retain-symbols-file $wl$export_symbols' - - runpath_var=LD_RUN_PATH - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir' - _LT_TAGVAR(hardcode_libdir_separator, $1)=: - - # Commands to make compiler produce verbose output that lists - # what "hidden" libraries, object files and flags are used when - # linking a shared library. - # - # There doesn't appear to be a way to prevent this compiler from - # explicitly linking system object files so we need to strip them - # from the output so that they don't get included in the library - # dependencies. - output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "ld"`; templist=`$ECHO "X$templist" | $Xsed -e "s/\(^.*ld.*\)\( .*ld .*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; $ECHO "X$list" | $Xsed' - ;; - xl*) - # IBM XL 8.0 on PPC, with GNU ld - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' - _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic' - _LT_TAGVAR(archive_cmds, $1)='$CC -qmkshrobj $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' - if test "x$supports_anon_versioning" = xyes; then - _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $output_objdir/$libname.ver~ - cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~ - echo "local: *; };" >> $output_objdir/$libname.ver~ - $CC -qmkshrobj $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib' - fi - ;; - *) - case `$CC -V 2>&1 | sed 5q` in - *Sun\ C*) - # Sun C++ 5.9 - _LT_TAGVAR(no_undefined_flag, $1)=' -zdefs' - _LT_TAGVAR(archive_cmds, $1)='$CC -G${allow_undefined_flag} -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' - _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G${allow_undefined_flag} -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-retain-symbols-file ${wl}$export_symbols' - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' - _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; $ECHO \"$new_convenience\"` ${wl}--no-whole-archive' - _LT_TAGVAR(compiler_needs_object, $1)=yes - - # Not sure whether something based on - # $CC $CFLAGS -v conftest.$objext -o libconftest$shared_ext 2>&1 - # would be better. - output_verbose_link_cmd='echo' - - # Archives containing C++ object files must be created using - # "CC -xar", where "CC" is the Sun C++ compiler. This is - # necessary to make sure instantiated templates are included - # in the archive. - _LT_TAGVAR(old_archive_cmds, $1)='$CC -xar -o $oldlib $oldobjs' - ;; - esac - ;; - esac - ;; - - lynxos*) - # FIXME: insert proper C++ library support - _LT_TAGVAR(ld_shlibs, $1)=no - ;; - - m88k*) - # FIXME: insert proper C++ library support - _LT_TAGVAR(ld_shlibs, $1)=no - ;; - - mvs*) - case $cc_basename in - cxx*) - # FIXME: insert proper C++ library support - _LT_TAGVAR(ld_shlibs, $1)=no - ;; - *) - # FIXME: insert proper C++ library support - _LT_TAGVAR(ld_shlibs, $1)=no - ;; - esac - ;; - - netbsd*) - if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then - _LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $predep_objects $libobjs $deplibs $postdep_objects $linker_flags' - wlarc= - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' - _LT_TAGVAR(hardcode_direct, $1)=yes - _LT_TAGVAR(hardcode_shlibpath_var, $1)=no - fi - # Workaround some broken pre-1.5 toolchains - output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP conftest.$objext | $SED -e "s:-lgcc -lc -lgcc::"' - ;; - - *nto* | *qnx*) - _LT_TAGVAR(ld_shlibs, $1)=yes - ;; - - openbsd2*) - # C++ shared libraries are fairly broken - _LT_TAGVAR(ld_shlibs, $1)=no - ;; - - openbsd*) - if test -f /usr/libexec/ld.so; then - _LT_TAGVAR(hardcode_direct, $1)=yes - _LT_TAGVAR(hardcode_shlibpath_var, $1)=no - _LT_TAGVAR(hardcode_direct_absolute, $1)=yes - _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $lib' - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' - if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then - _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-retain-symbols-file,$export_symbols -o $lib' - _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' - _LT_TAGVAR(whole_archive_flag_spec, $1)="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive' - fi - output_verbose_link_cmd=echo - else - _LT_TAGVAR(ld_shlibs, $1)=no - fi - ;; - - osf3* | osf4* | osf5*) - case $cc_basename in - KCC*) - # Kuck and Associates, Inc. (KAI) C++ Compiler - - # KCC will only create a shared library if the output file - # ends with ".so" (or ".sl" for HP-UX), so rename the library - # to its proper name (with version) after linking. - _LT_TAGVAR(archive_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo "$lib" | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib' - - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' - _LT_TAGVAR(hardcode_libdir_separator, $1)=: - - # Archives containing C++ object files must be created using - # the KAI C++ compiler. - case $host in - osf3*) _LT_TAGVAR(old_archive_cmds, $1)='$CC -Bstatic -o $oldlib $oldobjs' ;; - *) _LT_TAGVAR(old_archive_cmds, $1)='$CC -o $oldlib $oldobjs' ;; - esac - ;; - RCC*) - # Rational C++ 2.4.1 - # FIXME: insert proper C++ library support - _LT_TAGVAR(ld_shlibs, $1)=no - ;; - cxx*) - case $host in - osf3*) - _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*' - _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $soname `test -n "$verstring" && $ECHO "X${wl}-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib' - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' - ;; - *) - _LT_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*' - _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib' - _LT_TAGVAR(archive_expsym_cmds, $1)='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done~ - echo "-hidden">> $lib.exp~ - $CC -shared$allow_undefined_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname ${wl}-input ${wl}$lib.exp `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib~ - $RM $lib.exp' - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir' - ;; - esac - - _LT_TAGVAR(hardcode_libdir_separator, $1)=: - - # Commands to make compiler produce verbose output that lists - # what "hidden" libraries, object files and flags are used when - # linking a shared library. - # - # There doesn't appear to be a way to prevent this compiler from - # explicitly linking system object files so we need to strip them - # from the output so that they don't get included in the library - # dependencies. - output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "ld" | $GREP -v "ld:"`; templist=`$ECHO "X$templist" | $Xsed -e "s/\(^.*ld.*\)\( .*ld.*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; $ECHO "X$list" | $Xsed' - ;; - *) - if test "$GXX" = yes && test "$with_gnu_ld" = no; then - _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*' - case $host in - osf3*) - _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' - ;; - *) - _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' - ;; - esac - - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' - _LT_TAGVAR(hardcode_libdir_separator, $1)=: - - # Commands to make compiler produce verbose output that lists - # what "hidden" libraries, object files and flags are used when - # linking a shared library. - output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "\-L"' - - else - # FIXME: insert proper C++ library support - _LT_TAGVAR(ld_shlibs, $1)=no - fi - ;; - esac - ;; - - psos*) - # FIXME: insert proper C++ library support - _LT_TAGVAR(ld_shlibs, $1)=no - ;; - - sunos4*) - case $cc_basename in - CC*) - # Sun C++ 4.x - # FIXME: insert proper C++ library support - _LT_TAGVAR(ld_shlibs, $1)=no - ;; - lcc*) - # Lucid - # FIXME: insert proper C++ library support - _LT_TAGVAR(ld_shlibs, $1)=no - ;; - *) - # FIXME: insert proper C++ library support - _LT_TAGVAR(ld_shlibs, $1)=no - ;; - esac - ;; - - solaris*) - case $cc_basename in - CC*) - # Sun C++ 4.2, 5.x and Centerline C++ - _LT_TAGVAR(archive_cmds_need_lc,$1)=yes - _LT_TAGVAR(no_undefined_flag, $1)=' -zdefs' - _LT_TAGVAR(archive_cmds, $1)='$CC -G${allow_undefined_flag} -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' - _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~ - $CC -G${allow_undefined_flag} ${wl}-M ${wl}$lib.exp -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$RM $lib.exp' - - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' - _LT_TAGVAR(hardcode_shlibpath_var, $1)=no - case $host_os in - solaris2.[[0-5]] | solaris2.[[0-5]].*) ;; - *) - # The compiler driver will combine and reorder linker options, - # but understands `-z linker_flag'. - # Supported since Solaris 2.6 (maybe 2.5.1?) - _LT_TAGVAR(whole_archive_flag_spec, $1)='-z allextract$convenience -z defaultextract' - ;; - esac - _LT_TAGVAR(link_all_deplibs, $1)=yes - - output_verbose_link_cmd='echo' - - # Archives containing C++ object files must be created using - # "CC -xar", where "CC" is the Sun C++ compiler. This is - # necessary to make sure instantiated templates are included - # in the archive. - _LT_TAGVAR(old_archive_cmds, $1)='$CC -xar -o $oldlib $oldobjs' - ;; - gcx*) - # Green Hills C++ Compiler - _LT_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib' - - # The C++ compiler must be used to create the archive. - _LT_TAGVAR(old_archive_cmds, $1)='$CC $LDFLAGS -archive -o $oldlib $oldobjs' - ;; - *) - # GNU C++ compiler with Solaris linker - if test "$GXX" = yes && test "$with_gnu_ld" = no; then - _LT_TAGVAR(no_undefined_flag, $1)=' ${wl}-z ${wl}defs' - if $CC --version | $GREP -v '^2\.7' > /dev/null; then - _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $LDFLAGS $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib' - _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~ - $CC -shared -nostdlib ${wl}-M $wl$lib.exp -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$RM $lib.exp' - - # Commands to make compiler produce verbose output that lists - # what "hidden" libraries, object files and flags are used when - # linking a shared library. - output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "\-L"' - else - # g++ 2.7 appears to require `-G' NOT `-shared' on this - # platform. - _LT_TAGVAR(archive_cmds, $1)='$CC -G -nostdlib $LDFLAGS $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib' - _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~ - $CC -G -nostdlib ${wl}-M $wl$lib.exp -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$RM $lib.exp' - - # Commands to make compiler produce verbose output that lists - # what "hidden" libraries, object files and flags are used when - # linking a shared library. - output_verbose_link_cmd='$CC -G $CFLAGS -v conftest.$objext 2>&1 | $GREP "\-L"' - fi - - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $wl$libdir' - case $host_os in - solaris2.[[0-5]] | solaris2.[[0-5]].*) ;; - *) - _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}-z ${wl}allextract$convenience ${wl}-z ${wl}defaultextract' - ;; - esac - fi - ;; - esac - ;; - - sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[[01]].[[10]]* | unixware7* | sco3.2v5.0.[[024]]*) - _LT_TAGVAR(no_undefined_flag, $1)='${wl}-z,text' - _LT_TAGVAR(archive_cmds_need_lc, $1)=no - _LT_TAGVAR(hardcode_shlibpath_var, $1)=no - runpath_var='LD_RUN_PATH' - - case $cc_basename in - CC*) - _LT_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' - _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' - ;; - *) - _LT_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' - _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' - ;; - esac - ;; - - sysv5* | sco3.2v5* | sco5v6*) - # Note: We can NOT use -z defs as we might desire, because we do not - # link with -lc, and that would cause any symbols used from libc to - # always be unresolved, which means just about no library would - # ever link correctly. If we're not using GNU ld we use -z text - # though, which does catch some bad symbols but isn't as heavy-handed - # as -z defs. - _LT_TAGVAR(no_undefined_flag, $1)='${wl}-z,text' - _LT_TAGVAR(allow_undefined_flag, $1)='${wl}-z,nodefs' - _LT_TAGVAR(archive_cmds_need_lc, $1)=no - _LT_TAGVAR(hardcode_shlibpath_var, $1)=no - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R,$libdir' - _LT_TAGVAR(hardcode_libdir_separator, $1)=':' - _LT_TAGVAR(link_all_deplibs, $1)=yes - _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-Bexport' - runpath_var='LD_RUN_PATH' - - case $cc_basename in - CC*) - _LT_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' - _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' - ;; - *) - _LT_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' - _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' - ;; - esac - ;; - - tandem*) - case $cc_basename in - NCC*) - # NonStop-UX NCC 3.20 - # FIXME: insert proper C++ library support - _LT_TAGVAR(ld_shlibs, $1)=no - ;; - *) - # FIXME: insert proper C++ library support - _LT_TAGVAR(ld_shlibs, $1)=no - ;; - esac - ;; - - vxworks*) - # FIXME: insert proper C++ library support - _LT_TAGVAR(ld_shlibs, $1)=no - ;; - - *) - # FIXME: insert proper C++ library support - _LT_TAGVAR(ld_shlibs, $1)=no - ;; - esac - - AC_MSG_RESULT([$_LT_TAGVAR(ld_shlibs, $1)]) - test "$_LT_TAGVAR(ld_shlibs, $1)" = no && can_build_shared=no - - _LT_TAGVAR(GCC, $1)="$GXX" - _LT_TAGVAR(LD, $1)="$LD" - - ## CAVEAT EMPTOR: - ## There is no encapsulation within the following macros, do not change - ## the running order or otherwise move them around unless you know exactly - ## what you are doing... - _LT_SYS_HIDDEN_LIBDEPS($1) - _LT_COMPILER_PIC($1) - _LT_COMPILER_C_O($1) - _LT_COMPILER_FILE_LOCKS($1) - _LT_LINKER_SHLIBS($1) - _LT_SYS_DYNAMIC_LINKER($1) - _LT_LINKER_HARDCODE_LIBPATH($1) - - _LT_CONFIG($1) - fi # test -n "$compiler" - - CC=$lt_save_CC - LDCXX=$LD - LD=$lt_save_LD - GCC=$lt_save_GCC - with_gnu_ld=$lt_save_with_gnu_ld - lt_cv_path_LDCXX=$lt_cv_path_LD - lt_cv_path_LD=$lt_save_path_LD - lt_cv_prog_gnu_ldcxx=$lt_cv_prog_gnu_ld - lt_cv_prog_gnu_ld=$lt_save_with_gnu_ld -fi # test "$_lt_caught_CXX_error" != yes - -AC_LANG_POP -])# _LT_LANG_CXX_CONFIG - - -# _LT_SYS_HIDDEN_LIBDEPS([TAGNAME]) -# --------------------------------- -# Figure out "hidden" library dependencies from verbose -# compiler output when linking a shared library. -# Parse the compiler output and extract the necessary -# objects, libraries and library flags. -m4_defun([_LT_SYS_HIDDEN_LIBDEPS], -[m4_require([_LT_FILEUTILS_DEFAULTS])dnl -# Dependencies to place before and after the object being linked: -_LT_TAGVAR(predep_objects, $1)= -_LT_TAGVAR(postdep_objects, $1)= -_LT_TAGVAR(predeps, $1)= -_LT_TAGVAR(postdeps, $1)= -_LT_TAGVAR(compiler_lib_search_path, $1)= - -dnl we can't use the lt_simple_compile_test_code here, -dnl because it contains code intended for an executable, -dnl not a library. It's possible we should let each -dnl tag define a new lt_????_link_test_code variable, -dnl but it's only used here... -m4_if([$1], [], [cat > conftest.$ac_ext <<_LT_EOF -int a; -void foo (void) { a = 0; } -_LT_EOF -], [$1], [CXX], [cat > conftest.$ac_ext <<_LT_EOF -class Foo -{ -public: - Foo (void) { a = 0; } -private: - int a; -}; -_LT_EOF -], [$1], [F77], [cat > conftest.$ac_ext <<_LT_EOF - subroutine foo - implicit none - integer*4 a - a=0 - return - end -_LT_EOF -], [$1], [FC], [cat > conftest.$ac_ext <<_LT_EOF - subroutine foo - implicit none - integer a - a=0 - return - end -_LT_EOF -], [$1], [GCJ], [cat > conftest.$ac_ext <<_LT_EOF -public class foo { - private int a; - public void bar (void) { - a = 0; - } -}; -_LT_EOF -]) -dnl Parse the compiler output and extract the necessary -dnl objects, libraries and library flags. -if AC_TRY_EVAL(ac_compile); then - # Parse the compiler output and extract the necessary - # objects, libraries and library flags. - - # Sentinel used to keep track of whether or not we are before - # the conftest object file. - pre_test_object_deps_done=no - - for p in `eval "$output_verbose_link_cmd"`; do - case $p in - - -L* | -R* | -l*) - # Some compilers place space between "-{L,R}" and the path. - # Remove the space. - if test $p = "-L" || - test $p = "-R"; then - prev=$p - continue - else - prev= - fi - - if test "$pre_test_object_deps_done" = no; then - case $p in - -L* | -R*) - # Internal compiler library paths should come after those - # provided the user. The postdeps already come after the - # user supplied libs so there is no need to process them. - if test -z "$_LT_TAGVAR(compiler_lib_search_path, $1)"; then - _LT_TAGVAR(compiler_lib_search_path, $1)="${prev}${p}" - else - _LT_TAGVAR(compiler_lib_search_path, $1)="${_LT_TAGVAR(compiler_lib_search_path, $1)} ${prev}${p}" - fi - ;; - # The "-l" case would never come before the object being - # linked, so don't bother handling this case. - esac - else - if test -z "$_LT_TAGVAR(postdeps, $1)"; then - _LT_TAGVAR(postdeps, $1)="${prev}${p}" - else - _LT_TAGVAR(postdeps, $1)="${_LT_TAGVAR(postdeps, $1)} ${prev}${p}" - fi - fi - ;; - - *.$objext) - # This assumes that the test object file only shows up - # once in the compiler output. - if test "$p" = "conftest.$objext"; then - pre_test_object_deps_done=yes - continue - fi - - if test "$pre_test_object_deps_done" = no; then - if test -z "$_LT_TAGVAR(predep_objects, $1)"; then - _LT_TAGVAR(predep_objects, $1)="$p" - else - _LT_TAGVAR(predep_objects, $1)="$_LT_TAGVAR(predep_objects, $1) $p" - fi - else - if test -z "$_LT_TAGVAR(postdep_objects, $1)"; then - _LT_TAGVAR(postdep_objects, $1)="$p" - else - _LT_TAGVAR(postdep_objects, $1)="$_LT_TAGVAR(postdep_objects, $1) $p" - fi - fi - ;; - - *) ;; # Ignore the rest. - - esac - done - - # Clean up. - rm -f a.out a.exe -else - echo "libtool.m4: error: problem compiling $1 test program" -fi - -$RM -f confest.$objext - -# PORTME: override above test on systems where it is broken -m4_if([$1], [CXX], -[case $host_os in -interix[[3-9]]*) - # Interix 3.5 installs completely hosed .la files for C++, so rather than - # hack all around it, let's just trust "g++" to DTRT. - _LT_TAGVAR(predep_objects,$1)= - _LT_TAGVAR(postdep_objects,$1)= - _LT_TAGVAR(postdeps,$1)= - ;; - -linux*) - case `$CC -V 2>&1 | sed 5q` in - *Sun\ C*) - # Sun C++ 5.9 - - # The more standards-conforming stlport4 library is - # incompatible with the Cstd library. Avoid specifying - # it if it's in CXXFLAGS. Ignore libCrun as - # -library=stlport4 depends on it. - case " $CXX $CXXFLAGS " in - *" -library=stlport4 "*) - solaris_use_stlport4=yes - ;; - esac - - if test "$solaris_use_stlport4" != yes; then - _LT_TAGVAR(postdeps,$1)='-library=Cstd -library=Crun' - fi - ;; - esac - ;; - -solaris*) - case $cc_basename in - CC*) - # The more standards-conforming stlport4 library is - # incompatible with the Cstd library. Avoid specifying - # it if it's in CXXFLAGS. Ignore libCrun as - # -library=stlport4 depends on it. - case " $CXX $CXXFLAGS " in - *" -library=stlport4 "*) - solaris_use_stlport4=yes - ;; - esac - - # Adding this requires a known-good setup of shared libraries for - # Sun compiler versions before 5.6, else PIC objects from an old - # archive will be linked into the output, leading to subtle bugs. - if test "$solaris_use_stlport4" != yes; then - _LT_TAGVAR(postdeps,$1)='-library=Cstd -library=Crun' - fi - ;; - esac - ;; -esac -]) - -case " $_LT_TAGVAR(postdeps, $1) " in -*" -lc "*) _LT_TAGVAR(archive_cmds_need_lc, $1)=no ;; -esac - _LT_TAGVAR(compiler_lib_search_dirs, $1)= -if test -n "${_LT_TAGVAR(compiler_lib_search_path, $1)}"; then - _LT_TAGVAR(compiler_lib_search_dirs, $1)=`echo " ${_LT_TAGVAR(compiler_lib_search_path, $1)}" | ${SED} -e 's! -L! !g' -e 's!^ !!'` -fi -_LT_TAGDECL([], [compiler_lib_search_dirs], [1], - [The directories searched by this compiler when creating a shared library]) -_LT_TAGDECL([], [predep_objects], [1], - [Dependencies to place before and after the objects being linked to - create a shared library]) -_LT_TAGDECL([], [postdep_objects], [1]) -_LT_TAGDECL([], [predeps], [1]) -_LT_TAGDECL([], [postdeps], [1]) -_LT_TAGDECL([], [compiler_lib_search_path], [1], - [The library search path used internally by the compiler when linking - a shared library]) -])# _LT_SYS_HIDDEN_LIBDEPS - - -# _LT_PROG_F77 -# ------------ -# Since AC_PROG_F77 is broken, in that it returns the empty string -# if there is no fortran compiler, we have our own version here. -m4_defun([_LT_PROG_F77], -[ -pushdef([AC_MSG_ERROR], [_lt_disable_F77=yes]) -AC_PROG_F77 -if test -z "$F77" || test "X$F77" = "Xno"; then - _lt_disable_F77=yes -fi -popdef([AC_MSG_ERROR]) -])# _LT_PROG_F77 - -dnl aclocal-1.4 backwards compatibility: -dnl AC_DEFUN([_LT_PROG_F77], []) - - -# _LT_LANG_F77_CONFIG([TAG]) -# -------------------------- -# Ensure that the configuration variables for a Fortran 77 compiler are -# suitably defined. These variables are subsequently used by _LT_CONFIG -# to write the compiler configuration to `libtool'. -m4_defun([_LT_LANG_F77_CONFIG], -[AC_REQUIRE([_LT_PROG_F77])dnl -AC_LANG_PUSH(Fortran 77) - -_LT_TAGVAR(archive_cmds_need_lc, $1)=no -_LT_TAGVAR(allow_undefined_flag, $1)= -_LT_TAGVAR(always_export_symbols, $1)=no -_LT_TAGVAR(archive_expsym_cmds, $1)= -_LT_TAGVAR(export_dynamic_flag_spec, $1)= -_LT_TAGVAR(hardcode_direct, $1)=no -_LT_TAGVAR(hardcode_direct_absolute, $1)=no -_LT_TAGVAR(hardcode_libdir_flag_spec, $1)= -_LT_TAGVAR(hardcode_libdir_flag_spec_ld, $1)= -_LT_TAGVAR(hardcode_libdir_separator, $1)= -_LT_TAGVAR(hardcode_minus_L, $1)=no -_LT_TAGVAR(hardcode_automatic, $1)=no -_LT_TAGVAR(inherit_rpath, $1)=no -_LT_TAGVAR(module_cmds, $1)= -_LT_TAGVAR(module_expsym_cmds, $1)= -_LT_TAGVAR(link_all_deplibs, $1)=unknown -_LT_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds -_LT_TAGVAR(no_undefined_flag, $1)= -_LT_TAGVAR(whole_archive_flag_spec, $1)= -_LT_TAGVAR(enable_shared_with_static_runtimes, $1)=no - -# Source file extension for f77 test sources. -ac_ext=f - -# Object file extension for compiled f77 test sources. -objext=o -_LT_TAGVAR(objext, $1)=$objext - -# No sense in running all these tests if we already determined that -# the F77 compiler isn't working. Some variables (like enable_shared) -# are currently assumed to apply to all compilers on this platform, -# and will be corrupted by setting them based on a non-working compiler. -if test "$_lt_disable_F77" != yes; then - # Code to be used in simple compile tests - lt_simple_compile_test_code="\ - subroutine t - return - end -" - - # Code to be used in simple link tests - lt_simple_link_test_code="\ - program t - end -" - - # ltmain only uses $CC for tagged configurations so make sure $CC is set. - _LT_TAG_COMPILER - - # save warnings/boilerplate of simple test code - _LT_COMPILER_BOILERPLATE - _LT_LINKER_BOILERPLATE - - # Allow CC to be a program name with arguments. - lt_save_CC="$CC" - lt_save_GCC=$GCC - CC=${F77-"f77"} - compiler=$CC - _LT_TAGVAR(compiler, $1)=$CC - _LT_CC_BASENAME([$compiler]) - GCC=$G77 - if test -n "$compiler"; then - AC_MSG_CHECKING([if libtool supports shared libraries]) - AC_MSG_RESULT([$can_build_shared]) - - AC_MSG_CHECKING([whether to build shared libraries]) - test "$can_build_shared" = "no" && enable_shared=no - - # On AIX, shared libraries and static libraries use the same namespace, and - # are all built from PIC. - case $host_os in - aix3*) - test "$enable_shared" = yes && enable_static=no - if test -n "$RANLIB"; then - archive_cmds="$archive_cmds~\$RANLIB \$lib" - postinstall_cmds='$RANLIB $lib' - fi - ;; - aix[[4-9]]*) - if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then - test "$enable_shared" = yes && enable_static=no - fi - ;; - esac - AC_MSG_RESULT([$enable_shared]) - - AC_MSG_CHECKING([whether to build static libraries]) - # Make sure either enable_shared or enable_static is yes. - test "$enable_shared" = yes || enable_static=yes - AC_MSG_RESULT([$enable_static]) - - _LT_TAGVAR(GCC, $1)="$G77" - _LT_TAGVAR(LD, $1)="$LD" - - ## CAVEAT EMPTOR: - ## There is no encapsulation within the following macros, do not change - ## the running order or otherwise move them around unless you know exactly - ## what you are doing... - _LT_COMPILER_PIC($1) - _LT_COMPILER_C_O($1) - _LT_COMPILER_FILE_LOCKS($1) - _LT_LINKER_SHLIBS($1) - _LT_SYS_DYNAMIC_LINKER($1) - _LT_LINKER_HARDCODE_LIBPATH($1) - - _LT_CONFIG($1) - fi # test -n "$compiler" - - GCC=$lt_save_GCC - CC="$lt_save_CC" -fi # test "$_lt_disable_F77" != yes - -AC_LANG_POP -])# _LT_LANG_F77_CONFIG - - -# _LT_PROG_FC -# ----------- -# Since AC_PROG_FC is broken, in that it returns the empty string -# if there is no fortran compiler, we have our own version here. -m4_defun([_LT_PROG_FC], -[ -pushdef([AC_MSG_ERROR], [_lt_disable_FC=yes]) -AC_PROG_FC -if test -z "$FC" || test "X$FC" = "Xno"; then - _lt_disable_FC=yes -fi -popdef([AC_MSG_ERROR]) -])# _LT_PROG_FC - -dnl aclocal-1.4 backwards compatibility: -dnl AC_DEFUN([_LT_PROG_FC], []) - - -# _LT_LANG_FC_CONFIG([TAG]) -# ------------------------- -# Ensure that the configuration variables for a Fortran compiler are -# suitably defined. These variables are subsequently used by _LT_CONFIG -# to write the compiler configuration to `libtool'. -m4_defun([_LT_LANG_FC_CONFIG], -[AC_REQUIRE([_LT_PROG_FC])dnl -AC_LANG_PUSH(Fortran) - -_LT_TAGVAR(archive_cmds_need_lc, $1)=no -_LT_TAGVAR(allow_undefined_flag, $1)= -_LT_TAGVAR(always_export_symbols, $1)=no -_LT_TAGVAR(archive_expsym_cmds, $1)= -_LT_TAGVAR(export_dynamic_flag_spec, $1)= -_LT_TAGVAR(hardcode_direct, $1)=no -_LT_TAGVAR(hardcode_direct_absolute, $1)=no -_LT_TAGVAR(hardcode_libdir_flag_spec, $1)= -_LT_TAGVAR(hardcode_libdir_flag_spec_ld, $1)= -_LT_TAGVAR(hardcode_libdir_separator, $1)= -_LT_TAGVAR(hardcode_minus_L, $1)=no -_LT_TAGVAR(hardcode_automatic, $1)=no -_LT_TAGVAR(inherit_rpath, $1)=no -_LT_TAGVAR(module_cmds, $1)= -_LT_TAGVAR(module_expsym_cmds, $1)= -_LT_TAGVAR(link_all_deplibs, $1)=unknown -_LT_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds -_LT_TAGVAR(no_undefined_flag, $1)= -_LT_TAGVAR(whole_archive_flag_spec, $1)= -_LT_TAGVAR(enable_shared_with_static_runtimes, $1)=no - -# Source file extension for fc test sources. -ac_ext=${ac_fc_srcext-f} - -# Object file extension for compiled fc test sources. -objext=o -_LT_TAGVAR(objext, $1)=$objext - -# No sense in running all these tests if we already determined that -# the FC compiler isn't working. Some variables (like enable_shared) -# are currently assumed to apply to all compilers on this platform, -# and will be corrupted by setting them based on a non-working compiler. -if test "$_lt_disable_FC" != yes; then - # Code to be used in simple compile tests - lt_simple_compile_test_code="\ - subroutine t - return - end -" - - # Code to be used in simple link tests - lt_simple_link_test_code="\ - program t - end -" - - # ltmain only uses $CC for tagged configurations so make sure $CC is set. - _LT_TAG_COMPILER - - # save warnings/boilerplate of simple test code - _LT_COMPILER_BOILERPLATE - _LT_LINKER_BOILERPLATE - - # Allow CC to be a program name with arguments. - lt_save_CC="$CC" - lt_save_GCC=$GCC - CC=${FC-"f95"} - compiler=$CC - GCC=$ac_cv_fc_compiler_gnu - - _LT_TAGVAR(compiler, $1)=$CC - _LT_CC_BASENAME([$compiler]) - - if test -n "$compiler"; then - AC_MSG_CHECKING([if libtool supports shared libraries]) - AC_MSG_RESULT([$can_build_shared]) - - AC_MSG_CHECKING([whether to build shared libraries]) - test "$can_build_shared" = "no" && enable_shared=no - - # On AIX, shared libraries and static libraries use the same namespace, and - # are all built from PIC. - case $host_os in - aix3*) - test "$enable_shared" = yes && enable_static=no - if test -n "$RANLIB"; then - archive_cmds="$archive_cmds~\$RANLIB \$lib" - postinstall_cmds='$RANLIB $lib' - fi - ;; - aix[[4-9]]*) - if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then - test "$enable_shared" = yes && enable_static=no - fi - ;; - esac - AC_MSG_RESULT([$enable_shared]) - - AC_MSG_CHECKING([whether to build static libraries]) - # Make sure either enable_shared or enable_static is yes. - test "$enable_shared" = yes || enable_static=yes - AC_MSG_RESULT([$enable_static]) - - _LT_TAGVAR(GCC, $1)="$ac_cv_fc_compiler_gnu" - _LT_TAGVAR(LD, $1)="$LD" - - ## CAVEAT EMPTOR: - ## There is no encapsulation within the following macros, do not change - ## the running order or otherwise move them around unless you know exactly - ## what you are doing... - _LT_SYS_HIDDEN_LIBDEPS($1) - _LT_COMPILER_PIC($1) - _LT_COMPILER_C_O($1) - _LT_COMPILER_FILE_LOCKS($1) - _LT_LINKER_SHLIBS($1) - _LT_SYS_DYNAMIC_LINKER($1) - _LT_LINKER_HARDCODE_LIBPATH($1) - - _LT_CONFIG($1) - fi # test -n "$compiler" - - GCC=$lt_save_GCC - CC="$lt_save_CC" -fi # test "$_lt_disable_FC" != yes - -AC_LANG_POP -])# _LT_LANG_FC_CONFIG - - -# _LT_LANG_GCJ_CONFIG([TAG]) -# -------------------------- -# Ensure that the configuration variables for the GNU Java Compiler compiler -# are suitably defined. These variables are subsequently used by _LT_CONFIG -# to write the compiler configuration to `libtool'. -m4_defun([_LT_LANG_GCJ_CONFIG], -[AC_REQUIRE([LT_PROG_GCJ])dnl -AC_LANG_SAVE - -# Source file extension for Java test sources. -ac_ext=java - -# Object file extension for compiled Java test sources. -objext=o -_LT_TAGVAR(objext, $1)=$objext - -# Code to be used in simple compile tests -lt_simple_compile_test_code="class foo {}" - -# Code to be used in simple link tests -lt_simple_link_test_code='public class conftest { public static void main(String[[]] argv) {}; }' - -# ltmain only uses $CC for tagged configurations so make sure $CC is set. -_LT_TAG_COMPILER - -# save warnings/boilerplate of simple test code -_LT_COMPILER_BOILERPLATE -_LT_LINKER_BOILERPLATE - -# Allow CC to be a program name with arguments. -lt_save_CC="$CC" -lt_save_GCC=$GCC -GCC=yes -CC=${GCJ-"gcj"} -compiler=$CC -_LT_TAGVAR(compiler, $1)=$CC -_LT_TAGVAR(LD, $1)="$LD" -_LT_CC_BASENAME([$compiler]) - -# GCJ did not exist at the time GCC didn't implicitly link libc in. -_LT_TAGVAR(archive_cmds_need_lc, $1)=no - -_LT_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds - -if test -n "$compiler"; then - _LT_COMPILER_NO_RTTI($1) - _LT_COMPILER_PIC($1) - _LT_COMPILER_C_O($1) - _LT_COMPILER_FILE_LOCKS($1) - _LT_LINKER_SHLIBS($1) - _LT_LINKER_HARDCODE_LIBPATH($1) - - _LT_CONFIG($1) -fi - -AC_LANG_RESTORE - -GCC=$lt_save_GCC -CC="$lt_save_CC" -])# _LT_LANG_GCJ_CONFIG - - -# _LT_LANG_RC_CONFIG([TAG]) -# ------------------------- -# Ensure that the configuration variables for the Windows resource compiler -# are suitably defined. These variables are subsequently used by _LT_CONFIG -# to write the compiler configuration to `libtool'. -m4_defun([_LT_LANG_RC_CONFIG], -[AC_REQUIRE([LT_PROG_RC])dnl -AC_LANG_SAVE - -# Source file extension for RC test sources. -ac_ext=rc - -# Object file extension for compiled RC test sources. -objext=o -_LT_TAGVAR(objext, $1)=$objext - -# Code to be used in simple compile tests -lt_simple_compile_test_code='sample MENU { MENUITEM "&Soup", 100, CHECKED }' - -# Code to be used in simple link tests -lt_simple_link_test_code="$lt_simple_compile_test_code" - -# ltmain only uses $CC for tagged configurations so make sure $CC is set. -_LT_TAG_COMPILER - -# save warnings/boilerplate of simple test code -_LT_COMPILER_BOILERPLATE -_LT_LINKER_BOILERPLATE - -# Allow CC to be a program name with arguments. -lt_save_CC="$CC" -lt_save_GCC=$GCC -GCC= -CC=${RC-"windres"} -compiler=$CC -_LT_TAGVAR(compiler, $1)=$CC -_LT_CC_BASENAME([$compiler]) -_LT_TAGVAR(lt_cv_prog_compiler_c_o, $1)=yes - -if test -n "$compiler"; then - : - _LT_CONFIG($1) -fi - -GCC=$lt_save_GCC -AC_LANG_RESTORE -CC="$lt_save_CC" -])# _LT_LANG_RC_CONFIG - - -# LT_PROG_GCJ -# ----------- -AC_DEFUN([LT_PROG_GCJ], -[m4_ifdef([AC_PROG_GCJ], [AC_PROG_GCJ], - [m4_ifdef([A][M_PROG_GCJ], [A][M_PROG_GCJ], - [AC_CHECK_TOOL(GCJ, gcj,) - test "x${GCJFLAGS+set}" = xset || GCJFLAGS="-g -O2" - AC_SUBST(GCJFLAGS)])])[]dnl -]) - -# Old name: -AU_ALIAS([LT_AC_PROG_GCJ], [LT_PROG_GCJ]) -dnl aclocal-1.4 backwards compatibility: -dnl AC_DEFUN([LT_AC_PROG_GCJ], []) - - -# LT_PROG_RC -# ---------- -AC_DEFUN([LT_PROG_RC], -[AC_CHECK_TOOL(RC, windres,) -]) - -# Old name: -AU_ALIAS([LT_AC_PROG_RC], [LT_PROG_RC]) -dnl aclocal-1.4 backwards compatibility: -dnl AC_DEFUN([LT_AC_PROG_RC], []) - - -# _LT_DECL_EGREP -# -------------- -# If we don't have a new enough Autoconf to choose the best grep -# available, choose the one first in the user's PATH. -m4_defun([_LT_DECL_EGREP], -[AC_REQUIRE([AC_PROG_EGREP])dnl -AC_REQUIRE([AC_PROG_FGREP])dnl -test -z "$GREP" && GREP=grep -_LT_DECL([], [GREP], [1], [A grep program that handles long lines]) -_LT_DECL([], [EGREP], [1], [An ERE matcher]) -_LT_DECL([], [FGREP], [1], [A literal string matcher]) -dnl Non-bleeding-edge autoconf doesn't subst GREP, so do it here too -AC_SUBST([GREP]) -]) - - -# _LT_DECL_OBJDUMP -# -------------- -# If we don't have a new enough Autoconf to choose the best objdump -# available, choose the one first in the user's PATH. -m4_defun([_LT_DECL_OBJDUMP], -[AC_CHECK_TOOL(OBJDUMP, objdump, false) -test -z "$OBJDUMP" && OBJDUMP=objdump -_LT_DECL([], [OBJDUMP], [1], [An object symbol dumper]) -AC_SUBST([OBJDUMP]) -]) - - -# _LT_DECL_SED -# ------------ -# Check for a fully-functional sed program, that truncates -# as few characters as possible. Prefer GNU sed if found. -m4_defun([_LT_DECL_SED], -[AC_PROG_SED -test -z "$SED" && SED=sed -Xsed="$SED -e 1s/^X//" -_LT_DECL([], [SED], [1], [A sed program that does not truncate output]) -_LT_DECL([], [Xsed], ["\$SED -e 1s/^X//"], - [Sed that helps us avoid accidentally triggering echo(1) options like -n]) -])# _LT_DECL_SED - -m4_ifndef([AC_PROG_SED], [ -# NOTE: This macro has been submitted for inclusion into # -# GNU Autoconf as AC_PROG_SED. When it is available in # -# a released version of Autoconf we should remove this # -# macro and use it instead. # - -m4_defun([AC_PROG_SED], -[AC_MSG_CHECKING([for a sed that does not truncate output]) -AC_CACHE_VAL(lt_cv_path_SED, -[# Loop through the user's path and test for sed and gsed. -# Then use that list of sed's as ones to test for truncation. -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for lt_ac_prog in sed gsed; do - for ac_exec_ext in '' $ac_executable_extensions; do - if $as_executable_p "$as_dir/$lt_ac_prog$ac_exec_ext"; then - lt_ac_sed_list="$lt_ac_sed_list $as_dir/$lt_ac_prog$ac_exec_ext" - fi - done - done -done -IFS=$as_save_IFS -lt_ac_max=0 -lt_ac_count=0 -# Add /usr/xpg4/bin/sed as it is typically found on Solaris -# along with /bin/sed that truncates output. -for lt_ac_sed in $lt_ac_sed_list /usr/xpg4/bin/sed; do - test ! -f $lt_ac_sed && continue - cat /dev/null > conftest.in - lt_ac_count=0 - echo $ECHO_N "0123456789$ECHO_C" >conftest.in - # Check for GNU sed and select it if it is found. - if "$lt_ac_sed" --version 2>&1 < /dev/null | grep 'GNU' > /dev/null; then - lt_cv_path_SED=$lt_ac_sed - break - fi - while true; do - cat conftest.in conftest.in >conftest.tmp - mv conftest.tmp conftest.in - cp conftest.in conftest.nl - echo >>conftest.nl - $lt_ac_sed -e 's/a$//' < conftest.nl >conftest.out || break - cmp -s conftest.out conftest.nl || break - # 10000 chars as input seems more than enough - test $lt_ac_count -gt 10 && break - lt_ac_count=`expr $lt_ac_count + 1` - if test $lt_ac_count -gt $lt_ac_max; then - lt_ac_max=$lt_ac_count - lt_cv_path_SED=$lt_ac_sed - fi - done -done -]) -SED=$lt_cv_path_SED -AC_SUBST([SED]) -AC_MSG_RESULT([$SED]) -])#AC_PROG_SED -])#m4_ifndef - -# Old name: -AU_ALIAS([LT_AC_PROG_SED], [AC_PROG_SED]) -dnl aclocal-1.4 backwards compatibility: -dnl AC_DEFUN([LT_AC_PROG_SED], []) - - -# _LT_CHECK_SHELL_FEATURES -# ------------------------ -# Find out whether the shell is Bourne or XSI compatible, -# or has some other useful features. -m4_defun([_LT_CHECK_SHELL_FEATURES], -[AC_MSG_CHECKING([whether the shell understands some XSI constructs]) -# Try some XSI features -xsi_shell=no -( _lt_dummy="a/b/c" - test "${_lt_dummy##*/},${_lt_dummy%/*},"${_lt_dummy%"$_lt_dummy"}, \ - = c,a/b,, \ - && eval 'test $(( 1 + 1 )) -eq 2 \ - && test "${#_lt_dummy}" -eq 5' ) >/dev/null 2>&1 \ - && xsi_shell=yes -AC_MSG_RESULT([$xsi_shell]) -_LT_CONFIG_LIBTOOL_INIT([xsi_shell='$xsi_shell']) - -AC_MSG_CHECKING([whether the shell understands "+="]) -lt_shell_append=no -( foo=bar; set foo baz; eval "$[1]+=\$[2]" && test "$foo" = barbaz ) \ - >/dev/null 2>&1 \ - && lt_shell_append=yes -AC_MSG_RESULT([$lt_shell_append]) -_LT_CONFIG_LIBTOOL_INIT([lt_shell_append='$lt_shell_append']) - -if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then - lt_unset=unset -else - lt_unset=false -fi -_LT_DECL([], [lt_unset], [0], [whether the shell understands "unset"])dnl - -# test EBCDIC or ASCII -case `echo X|tr X '\101'` in - A) # ASCII based system - # \n is not interpreted correctly by Solaris 8 /usr/ucb/tr - lt_SP2NL='tr \040 \012' - lt_NL2SP='tr \015\012 \040\040' - ;; - *) # EBCDIC based system - lt_SP2NL='tr \100 \n' - lt_NL2SP='tr \r\n \100\100' - ;; -esac -_LT_DECL([SP2NL], [lt_SP2NL], [1], [turn spaces into newlines])dnl -_LT_DECL([NL2SP], [lt_NL2SP], [1], [turn newlines into spaces])dnl -])# _LT_CHECK_SHELL_FEATURES - - -# _LT_PROG_XSI_SHELLFNS -# --------------------- -# Bourne and XSI compatible variants of some useful shell functions. -m4_defun([_LT_PROG_XSI_SHELLFNS], -[case $xsi_shell in - yes) - cat << \_LT_EOF >> "$cfgfile" - -# func_dirname file append nondir_replacement -# Compute the dirname of FILE. If nonempty, add APPEND to the result, -# otherwise set result to NONDIR_REPLACEMENT. -func_dirname () -{ - case ${1} in - */*) func_dirname_result="${1%/*}${2}" ;; - * ) func_dirname_result="${3}" ;; - esac -} - -# func_basename file -func_basename () -{ - func_basename_result="${1##*/}" -} - -# func_dirname_and_basename file append nondir_replacement -# perform func_basename and func_dirname in a single function -# call: -# dirname: Compute the dirname of FILE. If nonempty, -# add APPEND to the result, otherwise set result -# to NONDIR_REPLACEMENT. -# value returned in "$func_dirname_result" -# basename: Compute filename of FILE. -# value retuned in "$func_basename_result" -# Implementation must be kept synchronized with func_dirname -# and func_basename. For efficiency, we do not delegate to -# those functions but instead duplicate the functionality here. -func_dirname_and_basename () -{ - case ${1} in - */*) func_dirname_result="${1%/*}${2}" ;; - * ) func_dirname_result="${3}" ;; - esac - func_basename_result="${1##*/}" -} - -# func_stripname prefix suffix name -# strip PREFIX and SUFFIX off of NAME. -# PREFIX and SUFFIX must not contain globbing or regex special -# characters, hashes, percent signs, but SUFFIX may contain a leading -# dot (in which case that matches only a dot). -func_stripname () -{ - # pdksh 5.2.14 does not do ${X%$Y} correctly if both X and Y are - # positional parameters, so assign one to ordinary parameter first. - func_stripname_result=${3} - func_stripname_result=${func_stripname_result#"${1}"} - func_stripname_result=${func_stripname_result%"${2}"} -} - -# func_opt_split -func_opt_split () -{ - func_opt_split_opt=${1%%=*} - func_opt_split_arg=${1#*=} -} - -# func_lo2o object -func_lo2o () -{ - case ${1} in - *.lo) func_lo2o_result=${1%.lo}.${objext} ;; - *) func_lo2o_result=${1} ;; - esac -} - -# func_xform libobj-or-source -func_xform () -{ - func_xform_result=${1%.*}.lo -} - -# func_arith arithmetic-term... -func_arith () -{ - func_arith_result=$(( $[*] )) -} - -# func_len string -# STRING may not start with a hyphen. -func_len () -{ - func_len_result=${#1} -} - -_LT_EOF - ;; - *) # Bourne compatible functions. - cat << \_LT_EOF >> "$cfgfile" - -# func_dirname file append nondir_replacement -# Compute the dirname of FILE. If nonempty, add APPEND to the result, -# otherwise set result to NONDIR_REPLACEMENT. -func_dirname () -{ - # Extract subdirectory from the argument. - func_dirname_result=`$ECHO "X${1}" | $Xsed -e "$dirname"` - if test "X$func_dirname_result" = "X${1}"; then - func_dirname_result="${3}" - else - func_dirname_result="$func_dirname_result${2}" - fi -} - -# func_basename file -func_basename () -{ - func_basename_result=`$ECHO "X${1}" | $Xsed -e "$basename"` -} - -dnl func_dirname_and_basename -dnl A portable version of this function is already defined in general.m4sh -dnl so there is no need for it here. - -# func_stripname prefix suffix name -# strip PREFIX and SUFFIX off of NAME. -# PREFIX and SUFFIX must not contain globbing or regex special -# characters, hashes, percent signs, but SUFFIX may contain a leading -# dot (in which case that matches only a dot). -# func_strip_suffix prefix name -func_stripname () -{ - case ${2} in - .*) func_stripname_result=`$ECHO "X${3}" \ - | $Xsed -e "s%^${1}%%" -e "s%\\\\${2}\$%%"`;; - *) func_stripname_result=`$ECHO "X${3}" \ - | $Xsed -e "s%^${1}%%" -e "s%${2}\$%%"`;; - esac -} - -# sed scripts: -my_sed_long_opt='1s/^\(-[[^=]]*\)=.*/\1/;q' -my_sed_long_arg='1s/^-[[^=]]*=//' - -# func_opt_split -func_opt_split () -{ - func_opt_split_opt=`$ECHO "X${1}" | $Xsed -e "$my_sed_long_opt"` - func_opt_split_arg=`$ECHO "X${1}" | $Xsed -e "$my_sed_long_arg"` -} - -# func_lo2o object -func_lo2o () -{ - func_lo2o_result=`$ECHO "X${1}" | $Xsed -e "$lo2o"` -} - -# func_xform libobj-or-source -func_xform () -{ - func_xform_result=`$ECHO "X${1}" | $Xsed -e 's/\.[[^.]]*$/.lo/'` -} - -# func_arith arithmetic-term... -func_arith () -{ - func_arith_result=`expr "$[@]"` -} - -# func_len string -# STRING may not start with a hyphen. -func_len () -{ - func_len_result=`expr "$[1]" : ".*" 2>/dev/null || echo $max_cmd_len` -} - -_LT_EOF -esac - -case $lt_shell_append in - yes) - cat << \_LT_EOF >> "$cfgfile" - -# func_append var value -# Append VALUE to the end of shell variable VAR. -func_append () -{ - eval "$[1]+=\$[2]" -} -_LT_EOF - ;; - *) - cat << \_LT_EOF >> "$cfgfile" - -# func_append var value -# Append VALUE to the end of shell variable VAR. -func_append () -{ - eval "$[1]=\$$[1]\$[2]" -} - -_LT_EOF - ;; - esac -]) - -# Helper functions for option handling. -*- Autoconf -*- -# -# Copyright (C) 2004, 2005, 2007, 2008 Free Software Foundation, Inc. -# Written by Gary V. Vaughan, 2004 -# -# This file is free software; the Free Software Foundation gives -# unlimited permission to copy and/or distribute it, with or without -# modifications, as long as this notice is preserved. - -# serial 6 ltoptions.m4 - -# This is to help aclocal find these macros, as it can't see m4_define. -AC_DEFUN([LTOPTIONS_VERSION], [m4_if([1])]) - - -# _LT_MANGLE_OPTION(MACRO-NAME, OPTION-NAME) -# ------------------------------------------ -m4_define([_LT_MANGLE_OPTION], -[[_LT_OPTION_]m4_bpatsubst($1__$2, [[^a-zA-Z0-9_]], [_])]) - - -# _LT_SET_OPTION(MACRO-NAME, OPTION-NAME) -# --------------------------------------- -# Set option OPTION-NAME for macro MACRO-NAME, and if there is a -# matching handler defined, dispatch to it. Other OPTION-NAMEs are -# saved as a flag. -m4_define([_LT_SET_OPTION], -[m4_define(_LT_MANGLE_OPTION([$1], [$2]))dnl -m4_ifdef(_LT_MANGLE_DEFUN([$1], [$2]), - _LT_MANGLE_DEFUN([$1], [$2]), - [m4_warning([Unknown $1 option `$2'])])[]dnl -]) - - -# _LT_IF_OPTION(MACRO-NAME, OPTION-NAME, IF-SET, [IF-NOT-SET]) -# ------------------------------------------------------------ -# Execute IF-SET if OPTION is set, IF-NOT-SET otherwise. -m4_define([_LT_IF_OPTION], -[m4_ifdef(_LT_MANGLE_OPTION([$1], [$2]), [$3], [$4])]) - - -# _LT_UNLESS_OPTIONS(MACRO-NAME, OPTION-LIST, IF-NOT-SET) -# ------------------------------------------------------- -# Execute IF-NOT-SET unless all options in OPTION-LIST for MACRO-NAME -# are set. -m4_define([_LT_UNLESS_OPTIONS], -[m4_foreach([_LT_Option], m4_split(m4_normalize([$2])), - [m4_ifdef(_LT_MANGLE_OPTION([$1], _LT_Option), - [m4_define([$0_found])])])[]dnl -m4_ifdef([$0_found], [m4_undefine([$0_found])], [$3 -])[]dnl -]) - - -# _LT_SET_OPTIONS(MACRO-NAME, OPTION-LIST) -# ---------------------------------------- -# OPTION-LIST is a space-separated list of Libtool options associated -# with MACRO-NAME. If any OPTION has a matching handler declared with -# LT_OPTION_DEFINE, dispatch to that macro; otherwise complain about -# the unknown option and exit. -m4_defun([_LT_SET_OPTIONS], -[# Set options -m4_foreach([_LT_Option], m4_split(m4_normalize([$2])), - [_LT_SET_OPTION([$1], _LT_Option)]) - -m4_if([$1],[LT_INIT],[ - dnl - dnl Simply set some default values (i.e off) if boolean options were not - dnl specified: - _LT_UNLESS_OPTIONS([LT_INIT], [dlopen], [enable_dlopen=no - ]) - _LT_UNLESS_OPTIONS([LT_INIT], [win32-dll], [enable_win32_dll=no - ]) - dnl - dnl If no reference was made to various pairs of opposing options, then - dnl we run the default mode handler for the pair. For example, if neither - dnl `shared' nor `disable-shared' was passed, we enable building of shared - dnl archives by default: - _LT_UNLESS_OPTIONS([LT_INIT], [shared disable-shared], [_LT_ENABLE_SHARED]) - _LT_UNLESS_OPTIONS([LT_INIT], [static disable-static], [_LT_ENABLE_STATIC]) - _LT_UNLESS_OPTIONS([LT_INIT], [pic-only no-pic], [_LT_WITH_PIC]) - _LT_UNLESS_OPTIONS([LT_INIT], [fast-install disable-fast-install], - [_LT_ENABLE_FAST_INSTALL]) - ]) -])# _LT_SET_OPTIONS - - - -# _LT_MANGLE_DEFUN(MACRO-NAME, OPTION-NAME) -# ----------------------------------------- -m4_define([_LT_MANGLE_DEFUN], -[[_LT_OPTION_DEFUN_]m4_bpatsubst(m4_toupper([$1__$2]), [[^A-Z0-9_]], [_])]) - - -# LT_OPTION_DEFINE(MACRO-NAME, OPTION-NAME, CODE) -# ----------------------------------------------- -m4_define([LT_OPTION_DEFINE], -[m4_define(_LT_MANGLE_DEFUN([$1], [$2]), [$3])[]dnl -])# LT_OPTION_DEFINE - - -# dlopen -# ------ -LT_OPTION_DEFINE([LT_INIT], [dlopen], [enable_dlopen=yes -]) - -AU_DEFUN([AC_LIBTOOL_DLOPEN], -[_LT_SET_OPTION([LT_INIT], [dlopen]) -AC_DIAGNOSE([obsolete], -[$0: Remove this warning and the call to _LT_SET_OPTION when you -put the `dlopen' option into LT_INIT's first parameter.]) -]) - -dnl aclocal-1.4 backwards compatibility: -dnl AC_DEFUN([AC_LIBTOOL_DLOPEN], []) - - -# win32-dll -# --------- -# Declare package support for building win32 dll's. -LT_OPTION_DEFINE([LT_INIT], [win32-dll], -[enable_win32_dll=yes - -case $host in -*-*-cygwin* | *-*-mingw* | *-*-pw32* | *-cegcc*) - AC_CHECK_TOOL(AS, as, false) - AC_CHECK_TOOL(DLLTOOL, dlltool, false) - AC_CHECK_TOOL(OBJDUMP, objdump, false) - ;; -esac - -test -z "$AS" && AS=as -_LT_DECL([], [AS], [0], [Assembler program])dnl - -test -z "$DLLTOOL" && DLLTOOL=dlltool -_LT_DECL([], [DLLTOOL], [0], [DLL creation program])dnl - -test -z "$OBJDUMP" && OBJDUMP=objdump -_LT_DECL([], [OBJDUMP], [0], [Object dumper program])dnl -])# win32-dll - -AU_DEFUN([AC_LIBTOOL_WIN32_DLL], -[AC_REQUIRE([AC_CANONICAL_HOST])dnl -_LT_SET_OPTION([LT_INIT], [win32-dll]) -AC_DIAGNOSE([obsolete], -[$0: Remove this warning and the call to _LT_SET_OPTION when you -put the `win32-dll' option into LT_INIT's first parameter.]) -]) - -dnl aclocal-1.4 backwards compatibility: -dnl AC_DEFUN([AC_LIBTOOL_WIN32_DLL], []) - - -# _LT_ENABLE_SHARED([DEFAULT]) -# ---------------------------- -# implement the --enable-shared flag, and supports the `shared' and -# `disable-shared' LT_INIT options. -# DEFAULT is either `yes' or `no'. If omitted, it defaults to `yes'. -m4_define([_LT_ENABLE_SHARED], -[m4_define([_LT_ENABLE_SHARED_DEFAULT], [m4_if($1, no, no, yes)])dnl -AC_ARG_ENABLE([shared], - [AS_HELP_STRING([--enable-shared@<:@=PKGS@:>@], - [build shared libraries @<:@default=]_LT_ENABLE_SHARED_DEFAULT[@:>@])], - [p=${PACKAGE-default} - case $enableval in - yes) enable_shared=yes ;; - no) enable_shared=no ;; - *) - enable_shared=no - # Look at the argument we got. We use all the common list separators. - lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR," - for pkg in $enableval; do - IFS="$lt_save_ifs" - if test "X$pkg" = "X$p"; then - enable_shared=yes - fi - done - IFS="$lt_save_ifs" - ;; - esac], - [enable_shared=]_LT_ENABLE_SHARED_DEFAULT) - - _LT_DECL([build_libtool_libs], [enable_shared], [0], - [Whether or not to build shared libraries]) -])# _LT_ENABLE_SHARED - -LT_OPTION_DEFINE([LT_INIT], [shared], [_LT_ENABLE_SHARED([yes])]) -LT_OPTION_DEFINE([LT_INIT], [disable-shared], [_LT_ENABLE_SHARED([no])]) - -# Old names: -AC_DEFUN([AC_ENABLE_SHARED], -[_LT_SET_OPTION([LT_INIT], m4_if([$1], [no], [disable-])[shared]) -]) - -AC_DEFUN([AC_DISABLE_SHARED], -[_LT_SET_OPTION([LT_INIT], [disable-shared]) -]) - -AU_DEFUN([AM_ENABLE_SHARED], [AC_ENABLE_SHARED($@)]) -AU_DEFUN([AM_DISABLE_SHARED], [AC_DISABLE_SHARED($@)]) - -dnl aclocal-1.4 backwards compatibility: -dnl AC_DEFUN([AM_ENABLE_SHARED], []) -dnl AC_DEFUN([AM_DISABLE_SHARED], []) - - - -# _LT_ENABLE_STATIC([DEFAULT]) -# ---------------------------- -# implement the --enable-static flag, and support the `static' and -# `disable-static' LT_INIT options. -# DEFAULT is either `yes' or `no'. If omitted, it defaults to `yes'. -m4_define([_LT_ENABLE_STATIC], -[m4_define([_LT_ENABLE_STATIC_DEFAULT], [m4_if($1, no, no, yes)])dnl -AC_ARG_ENABLE([static], - [AS_HELP_STRING([--enable-static@<:@=PKGS@:>@], - [build static libraries @<:@default=]_LT_ENABLE_STATIC_DEFAULT[@:>@])], - [p=${PACKAGE-default} - case $enableval in - yes) enable_static=yes ;; - no) enable_static=no ;; - *) - enable_static=no - # Look at the argument we got. We use all the common list separators. - lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR," - for pkg in $enableval; do - IFS="$lt_save_ifs" - if test "X$pkg" = "X$p"; then - enable_static=yes - fi - done - IFS="$lt_save_ifs" - ;; - esac], - [enable_static=]_LT_ENABLE_STATIC_DEFAULT) - - _LT_DECL([build_old_libs], [enable_static], [0], - [Whether or not to build static libraries]) -])# _LT_ENABLE_STATIC - -LT_OPTION_DEFINE([LT_INIT], [static], [_LT_ENABLE_STATIC([yes])]) -LT_OPTION_DEFINE([LT_INIT], [disable-static], [_LT_ENABLE_STATIC([no])]) - -# Old names: -AC_DEFUN([AC_ENABLE_STATIC], -[_LT_SET_OPTION([LT_INIT], m4_if([$1], [no], [disable-])[static]) -]) - -AC_DEFUN([AC_DISABLE_STATIC], -[_LT_SET_OPTION([LT_INIT], [disable-static]) -]) - -AU_DEFUN([AM_ENABLE_STATIC], [AC_ENABLE_STATIC($@)]) -AU_DEFUN([AM_DISABLE_STATIC], [AC_DISABLE_STATIC($@)]) - -dnl aclocal-1.4 backwards compatibility: -dnl AC_DEFUN([AM_ENABLE_STATIC], []) -dnl AC_DEFUN([AM_DISABLE_STATIC], []) - - - -# _LT_ENABLE_FAST_INSTALL([DEFAULT]) -# ---------------------------------- -# implement the --enable-fast-install flag, and support the `fast-install' -# and `disable-fast-install' LT_INIT options. -# DEFAULT is either `yes' or `no'. If omitted, it defaults to `yes'. -m4_define([_LT_ENABLE_FAST_INSTALL], -[m4_define([_LT_ENABLE_FAST_INSTALL_DEFAULT], [m4_if($1, no, no, yes)])dnl -AC_ARG_ENABLE([fast-install], - [AS_HELP_STRING([--enable-fast-install@<:@=PKGS@:>@], - [optimize for fast installation @<:@default=]_LT_ENABLE_FAST_INSTALL_DEFAULT[@:>@])], - [p=${PACKAGE-default} - case $enableval in - yes) enable_fast_install=yes ;; - no) enable_fast_install=no ;; - *) - enable_fast_install=no - # Look at the argument we got. We use all the common list separators. - lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR," - for pkg in $enableval; do - IFS="$lt_save_ifs" - if test "X$pkg" = "X$p"; then - enable_fast_install=yes - fi - done - IFS="$lt_save_ifs" - ;; - esac], - [enable_fast_install=]_LT_ENABLE_FAST_INSTALL_DEFAULT) - -_LT_DECL([fast_install], [enable_fast_install], [0], - [Whether or not to optimize for fast installation])dnl -])# _LT_ENABLE_FAST_INSTALL - -LT_OPTION_DEFINE([LT_INIT], [fast-install], [_LT_ENABLE_FAST_INSTALL([yes])]) -LT_OPTION_DEFINE([LT_INIT], [disable-fast-install], [_LT_ENABLE_FAST_INSTALL([no])]) - -# Old names: -AU_DEFUN([AC_ENABLE_FAST_INSTALL], -[_LT_SET_OPTION([LT_INIT], m4_if([$1], [no], [disable-])[fast-install]) -AC_DIAGNOSE([obsolete], -[$0: Remove this warning and the call to _LT_SET_OPTION when you put -the `fast-install' option into LT_INIT's first parameter.]) -]) - -AU_DEFUN([AC_DISABLE_FAST_INSTALL], -[_LT_SET_OPTION([LT_INIT], [disable-fast-install]) -AC_DIAGNOSE([obsolete], -[$0: Remove this warning and the call to _LT_SET_OPTION when you put -the `disable-fast-install' option into LT_INIT's first parameter.]) -]) - -dnl aclocal-1.4 backwards compatibility: -dnl AC_DEFUN([AC_ENABLE_FAST_INSTALL], []) -dnl AC_DEFUN([AM_DISABLE_FAST_INSTALL], []) - - -# _LT_WITH_PIC([MODE]) -# -------------------- -# implement the --with-pic flag, and support the `pic-only' and `no-pic' -# LT_INIT options. -# MODE is either `yes' or `no'. If omitted, it defaults to `both'. -m4_define([_LT_WITH_PIC], -[AC_ARG_WITH([pic], - [AS_HELP_STRING([--with-pic], - [try to use only PIC/non-PIC objects @<:@default=use both@:>@])], - [pic_mode="$withval"], - [pic_mode=default]) - -test -z "$pic_mode" && pic_mode=m4_default([$1], [default]) - -_LT_DECL([], [pic_mode], [0], [What type of objects to build])dnl -])# _LT_WITH_PIC - -LT_OPTION_DEFINE([LT_INIT], [pic-only], [_LT_WITH_PIC([yes])]) -LT_OPTION_DEFINE([LT_INIT], [no-pic], [_LT_WITH_PIC([no])]) - -# Old name: -AU_DEFUN([AC_LIBTOOL_PICMODE], -[_LT_SET_OPTION([LT_INIT], [pic-only]) -AC_DIAGNOSE([obsolete], -[$0: Remove this warning and the call to _LT_SET_OPTION when you -put the `pic-only' option into LT_INIT's first parameter.]) -]) - -dnl aclocal-1.4 backwards compatibility: -dnl AC_DEFUN([AC_LIBTOOL_PICMODE], []) - - -m4_define([_LTDL_MODE], []) -LT_OPTION_DEFINE([LTDL_INIT], [nonrecursive], - [m4_define([_LTDL_MODE], [nonrecursive])]) -LT_OPTION_DEFINE([LTDL_INIT], [recursive], - [m4_define([_LTDL_MODE], [recursive])]) -LT_OPTION_DEFINE([LTDL_INIT], [subproject], - [m4_define([_LTDL_MODE], [subproject])]) - -m4_define([_LTDL_TYPE], []) -LT_OPTION_DEFINE([LTDL_INIT], [installable], - [m4_define([_LTDL_TYPE], [installable])]) -LT_OPTION_DEFINE([LTDL_INIT], [convenience], - [m4_define([_LTDL_TYPE], [convenience])]) - -# ltsugar.m4 -- libtool m4 base layer. -*-Autoconf-*- -# -# Copyright (C) 2004, 2005, 2007, 2008 Free Software Foundation, Inc. -# Written by Gary V. Vaughan, 2004 -# -# This file is free software; the Free Software Foundation gives -# unlimited permission to copy and/or distribute it, with or without -# modifications, as long as this notice is preserved. - -# serial 6 ltsugar.m4 - -# This is to help aclocal find these macros, as it can't see m4_define. -AC_DEFUN([LTSUGAR_VERSION], [m4_if([0.1])]) - - -# lt_join(SEP, ARG1, [ARG2...]) -# ----------------------------- -# Produce ARG1SEPARG2...SEPARGn, omitting [] arguments and their -# associated separator. -# Needed until we can rely on m4_join from Autoconf 2.62, since all earlier -# versions in m4sugar had bugs. -m4_define([lt_join], -[m4_if([$#], [1], [], - [$#], [2], [[$2]], - [m4_if([$2], [], [], [[$2]_])$0([$1], m4_shift(m4_shift($@)))])]) -m4_define([_lt_join], -[m4_if([$#$2], [2], [], - [m4_if([$2], [], [], [[$1$2]])$0([$1], m4_shift(m4_shift($@)))])]) - - -# lt_car(LIST) -# lt_cdr(LIST) -# ------------ -# Manipulate m4 lists. -# These macros are necessary as long as will still need to support -# Autoconf-2.59 which quotes differently. -m4_define([lt_car], [[$1]]) -m4_define([lt_cdr], -[m4_if([$#], 0, [m4_fatal([$0: cannot be called without arguments])], - [$#], 1, [], - [m4_dquote(m4_shift($@))])]) -m4_define([lt_unquote], $1) - - -# lt_append(MACRO-NAME, STRING, [SEPARATOR]) -# ------------------------------------------ -# Redefine MACRO-NAME to hold its former content plus `SEPARATOR'`STRING'. -# Note that neither SEPARATOR nor STRING are expanded; they are appended -# to MACRO-NAME as is (leaving the expansion for when MACRO-NAME is invoked). -# No SEPARATOR is output if MACRO-NAME was previously undefined (different -# than defined and empty). -# -# This macro is needed until we can rely on Autoconf 2.62, since earlier -# versions of m4sugar mistakenly expanded SEPARATOR but not STRING. -m4_define([lt_append], -[m4_define([$1], - m4_ifdef([$1], [m4_defn([$1])[$3]])[$2])]) - - - -# lt_combine(SEP, PREFIX-LIST, INFIX, SUFFIX1, [SUFFIX2...]) -# ---------------------------------------------------------- -# Produce a SEP delimited list of all paired combinations of elements of -# PREFIX-LIST with SUFFIX1 through SUFFIXn. Each element of the list -# has the form PREFIXmINFIXSUFFIXn. -# Needed until we can rely on m4_combine added in Autoconf 2.62. -m4_define([lt_combine], -[m4_if(m4_eval([$# > 3]), [1], - [m4_pushdef([_Lt_sep], [m4_define([_Lt_sep], m4_defn([lt_car]))])]]dnl -[[m4_foreach([_Lt_prefix], [$2], - [m4_foreach([_Lt_suffix], - ]m4_dquote(m4_dquote(m4_shift(m4_shift(m4_shift($@)))))[, - [_Lt_sep([$1])[]m4_defn([_Lt_prefix])[$3]m4_defn([_Lt_suffix])])])])]) - - -# lt_if_append_uniq(MACRO-NAME, VARNAME, [SEPARATOR], [UNIQ], [NOT-UNIQ]) -# ----------------------------------------------------------------------- -# Iff MACRO-NAME does not yet contain VARNAME, then append it (delimited -# by SEPARATOR if supplied) and expand UNIQ, else NOT-UNIQ. -m4_define([lt_if_append_uniq], -[m4_ifdef([$1], - [m4_if(m4_index([$3]m4_defn([$1])[$3], [$3$2$3]), [-1], - [lt_append([$1], [$2], [$3])$4], - [$5])], - [lt_append([$1], [$2], [$3])$4])]) - - -# lt_dict_add(DICT, KEY, VALUE) -# ----------------------------- -m4_define([lt_dict_add], -[m4_define([$1($2)], [$3])]) - - -# lt_dict_add_subkey(DICT, KEY, SUBKEY, VALUE) -# -------------------------------------------- -m4_define([lt_dict_add_subkey], -[m4_define([$1($2:$3)], [$4])]) - - -# lt_dict_fetch(DICT, KEY, [SUBKEY]) -# ---------------------------------- -m4_define([lt_dict_fetch], -[m4_ifval([$3], - m4_ifdef([$1($2:$3)], [m4_defn([$1($2:$3)])]), - m4_ifdef([$1($2)], [m4_defn([$1($2)])]))]) - - -# lt_if_dict_fetch(DICT, KEY, [SUBKEY], VALUE, IF-TRUE, [IF-FALSE]) -# ----------------------------------------------------------------- -m4_define([lt_if_dict_fetch], -[m4_if(lt_dict_fetch([$1], [$2], [$3]), [$4], - [$5], - [$6])]) - - -# lt_dict_filter(DICT, [SUBKEY], VALUE, [SEPARATOR], KEY, [...]) -# -------------------------------------------------------------- -m4_define([lt_dict_filter], -[m4_if([$5], [], [], - [lt_join(m4_quote(m4_default([$4], [[, ]])), - lt_unquote(m4_split(m4_normalize(m4_foreach(_Lt_key, lt_car([m4_shiftn(4, $@)]), - [lt_if_dict_fetch([$1], _Lt_key, [$2], [$3], [_Lt_key ])])))))])[]dnl -]) - -# ltversion.m4 -- version numbers -*- Autoconf -*- -# -# Copyright (C) 2004 Free Software Foundation, Inc. -# Written by Scott James Remnant, 2004 -# -# This file is free software; the Free Software Foundation gives -# unlimited permission to copy and/or distribute it, with or without -# modifications, as long as this notice is preserved. - -# Generated from ltversion.in. - -# serial 3017 ltversion.m4 -# This file is part of GNU Libtool - -m4_define([LT_PACKAGE_VERSION], [2.2.6b]) -m4_define([LT_PACKAGE_REVISION], [1.3017]) - -AC_DEFUN([LTVERSION_VERSION], -[macro_version='2.2.6b' -macro_revision='1.3017' -_LT_DECL(, macro_version, 0, [Which release of libtool.m4 was used?]) -_LT_DECL(, macro_revision, 0) -]) - -# lt~obsolete.m4 -- aclocal satisfying obsolete definitions. -*-Autoconf-*- -# -# Copyright (C) 2004, 2005, 2007 Free Software Foundation, Inc. -# Written by Scott James Remnant, 2004. -# -# This file is free software; the Free Software Foundation gives -# unlimited permission to copy and/or distribute it, with or without -# modifications, as long as this notice is preserved. - -# serial 4 lt~obsolete.m4 - -# These exist entirely to fool aclocal when bootstrapping libtool. -# -# In the past libtool.m4 has provided macros via AC_DEFUN (or AU_DEFUN) -# which have later been changed to m4_define as they aren't part of the -# exported API, or moved to Autoconf or Automake where they belong. -# -# The trouble is, aclocal is a bit thick. It'll see the old AC_DEFUN -# in /usr/share/aclocal/libtool.m4 and remember it, then when it sees us -# using a macro with the same name in our local m4/libtool.m4 it'll -# pull the old libtool.m4 in (it doesn't see our shiny new m4_define -# and doesn't know about Autoconf macros at all.) -# -# So we provide this file, which has a silly filename so it's always -# included after everything else. This provides aclocal with the -# AC_DEFUNs it wants, but when m4 processes it, it doesn't do anything -# because those macros already exist, or will be overwritten later. -# We use AC_DEFUN over AU_DEFUN for compatibility with aclocal-1.6. -# -# Anytime we withdraw an AC_DEFUN or AU_DEFUN, remember to add it here. -# Yes, that means every name once taken will need to remain here until -# we give up compatibility with versions before 1.7, at which point -# we need to keep only those names which we still refer to. - -# This is to help aclocal find these macros, as it can't see m4_define. -AC_DEFUN([LTOBSOLETE_VERSION], [m4_if([1])]) - -m4_ifndef([AC_LIBTOOL_LINKER_OPTION], [AC_DEFUN([AC_LIBTOOL_LINKER_OPTION])]) -m4_ifndef([AC_PROG_EGREP], [AC_DEFUN([AC_PROG_EGREP])]) -m4_ifndef([_LT_AC_PROG_ECHO_BACKSLASH], [AC_DEFUN([_LT_AC_PROG_ECHO_BACKSLASH])]) -m4_ifndef([_LT_AC_SHELL_INIT], [AC_DEFUN([_LT_AC_SHELL_INIT])]) -m4_ifndef([_LT_AC_SYS_LIBPATH_AIX], [AC_DEFUN([_LT_AC_SYS_LIBPATH_AIX])]) -m4_ifndef([_LT_PROG_LTMAIN], [AC_DEFUN([_LT_PROG_LTMAIN])]) -m4_ifndef([_LT_AC_TAGVAR], [AC_DEFUN([_LT_AC_TAGVAR])]) -m4_ifndef([AC_LTDL_ENABLE_INSTALL], [AC_DEFUN([AC_LTDL_ENABLE_INSTALL])]) -m4_ifndef([AC_LTDL_PREOPEN], [AC_DEFUN([AC_LTDL_PREOPEN])]) -m4_ifndef([_LT_AC_SYS_COMPILER], [AC_DEFUN([_LT_AC_SYS_COMPILER])]) -m4_ifndef([_LT_AC_LOCK], [AC_DEFUN([_LT_AC_LOCK])]) -m4_ifndef([AC_LIBTOOL_SYS_OLD_ARCHIVE], [AC_DEFUN([AC_LIBTOOL_SYS_OLD_ARCHIVE])]) -m4_ifndef([_LT_AC_TRY_DLOPEN_SELF], [AC_DEFUN([_LT_AC_TRY_DLOPEN_SELF])]) -m4_ifndef([AC_LIBTOOL_PROG_CC_C_O], [AC_DEFUN([AC_LIBTOOL_PROG_CC_C_O])]) -m4_ifndef([AC_LIBTOOL_SYS_HARD_LINK_LOCKS], [AC_DEFUN([AC_LIBTOOL_SYS_HARD_LINK_LOCKS])]) -m4_ifndef([AC_LIBTOOL_OBJDIR], [AC_DEFUN([AC_LIBTOOL_OBJDIR])]) -m4_ifndef([AC_LTDL_OBJDIR], [AC_DEFUN([AC_LTDL_OBJDIR])]) -m4_ifndef([AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH], [AC_DEFUN([AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH])]) -m4_ifndef([AC_LIBTOOL_SYS_LIB_STRIP], [AC_DEFUN([AC_LIBTOOL_SYS_LIB_STRIP])]) -m4_ifndef([AC_PATH_MAGIC], [AC_DEFUN([AC_PATH_MAGIC])]) -m4_ifndef([AC_PROG_LD_GNU], [AC_DEFUN([AC_PROG_LD_GNU])]) -m4_ifndef([AC_PROG_LD_RELOAD_FLAG], [AC_DEFUN([AC_PROG_LD_RELOAD_FLAG])]) -m4_ifndef([AC_DEPLIBS_CHECK_METHOD], [AC_DEFUN([AC_DEPLIBS_CHECK_METHOD])]) -m4_ifndef([AC_LIBTOOL_PROG_COMPILER_NO_RTTI], [AC_DEFUN([AC_LIBTOOL_PROG_COMPILER_NO_RTTI])]) -m4_ifndef([AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE], [AC_DEFUN([AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE])]) -m4_ifndef([AC_LIBTOOL_PROG_COMPILER_PIC], [AC_DEFUN([AC_LIBTOOL_PROG_COMPILER_PIC])]) -m4_ifndef([AC_LIBTOOL_PROG_LD_SHLIBS], [AC_DEFUN([AC_LIBTOOL_PROG_LD_SHLIBS])]) -m4_ifndef([AC_LIBTOOL_POSTDEP_PREDEP], [AC_DEFUN([AC_LIBTOOL_POSTDEP_PREDEP])]) -m4_ifndef([LT_AC_PROG_EGREP], [AC_DEFUN([LT_AC_PROG_EGREP])]) -m4_ifndef([LT_AC_PROG_SED], [AC_DEFUN([LT_AC_PROG_SED])]) -m4_ifndef([_LT_CC_BASENAME], [AC_DEFUN([_LT_CC_BASENAME])]) -m4_ifndef([_LT_COMPILER_BOILERPLATE], [AC_DEFUN([_LT_COMPILER_BOILERPLATE])]) -m4_ifndef([_LT_LINKER_BOILERPLATE], [AC_DEFUN([_LT_LINKER_BOILERPLATE])]) -m4_ifndef([_AC_PROG_LIBTOOL], [AC_DEFUN([_AC_PROG_LIBTOOL])]) -m4_ifndef([AC_LIBTOOL_SETUP], [AC_DEFUN([AC_LIBTOOL_SETUP])]) -m4_ifndef([_LT_AC_CHECK_DLFCN], [AC_DEFUN([_LT_AC_CHECK_DLFCN])]) -m4_ifndef([AC_LIBTOOL_SYS_DYNAMIC_LINKER], [AC_DEFUN([AC_LIBTOOL_SYS_DYNAMIC_LINKER])]) -m4_ifndef([_LT_AC_TAGCONFIG], [AC_DEFUN([_LT_AC_TAGCONFIG])]) -m4_ifndef([AC_DISABLE_FAST_INSTALL], [AC_DEFUN([AC_DISABLE_FAST_INSTALL])]) -m4_ifndef([_LT_AC_LANG_CXX], [AC_DEFUN([_LT_AC_LANG_CXX])]) -m4_ifndef([_LT_AC_LANG_F77], [AC_DEFUN([_LT_AC_LANG_F77])]) -m4_ifndef([_LT_AC_LANG_GCJ], [AC_DEFUN([_LT_AC_LANG_GCJ])]) -m4_ifndef([AC_LIBTOOL_RC], [AC_DEFUN([AC_LIBTOOL_RC])]) -m4_ifndef([AC_LIBTOOL_LANG_C_CONFIG], [AC_DEFUN([AC_LIBTOOL_LANG_C_CONFIG])]) -m4_ifndef([_LT_AC_LANG_C_CONFIG], [AC_DEFUN([_LT_AC_LANG_C_CONFIG])]) -m4_ifndef([AC_LIBTOOL_LANG_CXX_CONFIG], [AC_DEFUN([AC_LIBTOOL_LANG_CXX_CONFIG])]) -m4_ifndef([_LT_AC_LANG_CXX_CONFIG], [AC_DEFUN([_LT_AC_LANG_CXX_CONFIG])]) -m4_ifndef([AC_LIBTOOL_LANG_F77_CONFIG], [AC_DEFUN([AC_LIBTOOL_LANG_F77_CONFIG])]) -m4_ifndef([_LT_AC_LANG_F77_CONFIG], [AC_DEFUN([_LT_AC_LANG_F77_CONFIG])]) -m4_ifndef([AC_LIBTOOL_LANG_GCJ_CONFIG], [AC_DEFUN([AC_LIBTOOL_LANG_GCJ_CONFIG])]) -m4_ifndef([_LT_AC_LANG_GCJ_CONFIG], [AC_DEFUN([_LT_AC_LANG_GCJ_CONFIG])]) -m4_ifndef([AC_LIBTOOL_LANG_RC_CONFIG], [AC_DEFUN([AC_LIBTOOL_LANG_RC_CONFIG])]) -m4_ifndef([_LT_AC_LANG_RC_CONFIG], [AC_DEFUN([_LT_AC_LANG_RC_CONFIG])]) -m4_ifndef([AC_LIBTOOL_CONFIG], [AC_DEFUN([AC_LIBTOOL_CONFIG])]) -m4_ifndef([_LT_AC_FILE_LTDLL_C], [AC_DEFUN([_LT_AC_FILE_LTDLL_C])]) - -# pkg.m4 - Macros to locate and utilise pkg-config. -*- Autoconf -*- -# -# Copyright © 2004 Scott James Remnant <scott@netsplit.com>. -# -# This program is free software; you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation; either version 2 of the License, or -# (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, but -# WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU -# General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. -# -# As a special exception to the GNU General Public License, if you -# distribute this file as part of a program that contains a -# configuration script generated by Autoconf, you may include it under -# the same distribution terms that you use for the rest of that program. - -# PKG_PROG_PKG_CONFIG([MIN-VERSION]) -# ---------------------------------- -AC_DEFUN([PKG_PROG_PKG_CONFIG], -[m4_pattern_forbid([^_?PKG_[A-Z_]+$]) -m4_pattern_allow([^PKG_CONFIG(_PATH)?$]) -AC_ARG_VAR([PKG_CONFIG], [path to pkg-config utility])dnl -if test "x$ac_cv_env_PKG_CONFIG_set" != "xset"; then - AC_PATH_TOOL([PKG_CONFIG], [pkg-config]) -fi -if test -n "$PKG_CONFIG"; then - _pkg_min_version=m4_default([$1], [0.9.0]) - AC_MSG_CHECKING([pkg-config is at least version $_pkg_min_version]) - if $PKG_CONFIG --atleast-pkgconfig-version $_pkg_min_version; then - AC_MSG_RESULT([yes]) - else - AC_MSG_RESULT([no]) - PKG_CONFIG="" - fi - -fi[]dnl -])# PKG_PROG_PKG_CONFIG - -# PKG_CHECK_EXISTS(MODULES, [ACTION-IF-FOUND], [ACTION-IF-NOT-FOUND]) -# -# Check to see whether a particular set of modules exists. Similar -# to PKG_CHECK_MODULES(), but does not set variables or print errors. -# -# -# Similar to PKG_CHECK_MODULES, make sure that the first instance of -# this or PKG_CHECK_MODULES is called, or make sure to call -# PKG_CHECK_EXISTS manually -# -------------------------------------------------------------- -AC_DEFUN([PKG_CHECK_EXISTS], -[AC_REQUIRE([PKG_PROG_PKG_CONFIG])dnl -if test -n "$PKG_CONFIG" && \ - AC_RUN_LOG([$PKG_CONFIG --exists --print-errors "$1"]); then - m4_ifval([$2], [$2], [:]) -m4_ifvaln([$3], [else - $3])dnl -fi]) - - -# _PKG_CONFIG([VARIABLE], [COMMAND], [MODULES]) -# --------------------------------------------- -m4_define([_PKG_CONFIG], -[if test -n "$$1"; then - pkg_cv_[]$1="$$1" - elif test -n "$PKG_CONFIG"; then - PKG_CHECK_EXISTS([$3], - [pkg_cv_[]$1=`$PKG_CONFIG --[]$2 "$3" 2>/dev/null`], - [pkg_failed=yes]) - else - pkg_failed=untried -fi[]dnl -])# _PKG_CONFIG - -# _PKG_SHORT_ERRORS_SUPPORTED -# ----------------------------- -AC_DEFUN([_PKG_SHORT_ERRORS_SUPPORTED], -[AC_REQUIRE([PKG_PROG_PKG_CONFIG]) -if $PKG_CONFIG --atleast-pkgconfig-version 0.20; then - _pkg_short_errors_supported=yes -else - _pkg_short_errors_supported=no -fi[]dnl -])# _PKG_SHORT_ERRORS_SUPPORTED - - -# PKG_CHECK_MODULES(VARIABLE-PREFIX, MODULES, [ACTION-IF-FOUND], -# [ACTION-IF-NOT-FOUND]) -# -# -# Note that if there is a possibility the first call to -# PKG_CHECK_MODULES might not happen, you should be sure to include an -# explicit call to PKG_PROG_PKG_CONFIG in your configure.ac -# -# -# -------------------------------------------------------------- -AC_DEFUN([PKG_CHECK_MODULES], -[AC_REQUIRE([PKG_PROG_PKG_CONFIG])dnl -AC_ARG_VAR([$1][_CFLAGS], [C compiler flags for $1, overriding pkg-config])dnl -AC_ARG_VAR([$1][_LIBS], [linker flags for $1, overriding pkg-config])dnl - -pkg_failed=no -AC_MSG_CHECKING([for $1]) - -_PKG_CONFIG([$1][_CFLAGS], [cflags], [$2]) -_PKG_CONFIG([$1][_LIBS], [libs], [$2]) - -m4_define([_PKG_TEXT], [Alternatively, you may set the environment variables $1[]_CFLAGS -and $1[]_LIBS to avoid the need to call pkg-config. -See the pkg-config man page for more details.]) - -if test $pkg_failed = yes; then - _PKG_SHORT_ERRORS_SUPPORTED - if test $_pkg_short_errors_supported = yes; then - $1[]_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors "$2" 2>&1` - else - $1[]_PKG_ERRORS=`$PKG_CONFIG --print-errors "$2" 2>&1` - fi - # Put the nasty error message in config.log where it belongs - echo "$$1[]_PKG_ERRORS" >&AS_MESSAGE_LOG_FD - - ifelse([$4], , [AC_MSG_ERROR(dnl -[Package requirements ($2) were not met: - -$$1_PKG_ERRORS - -Consider adjusting the PKG_CONFIG_PATH environment variable if you -installed software in a non-standard prefix. - -_PKG_TEXT -])], - [AC_MSG_RESULT([no]) - $4]) -elif test $pkg_failed = untried; then - ifelse([$4], , [AC_MSG_FAILURE(dnl -[The pkg-config script could not be found or is too old. Make sure it -is in your PATH or set the PKG_CONFIG environment variable to the full -path to pkg-config. - -_PKG_TEXT - -To get pkg-config, see <http://pkg-config.freedesktop.org/>.])], - [$4]) -else - $1[]_CFLAGS=$pkg_cv_[]$1[]_CFLAGS - $1[]_LIBS=$pkg_cv_[]$1[]_LIBS - AC_MSG_RESULT([yes]) - ifelse([$3], , :, [$3]) -fi[]dnl -])# PKG_CHECK_MODULES - -# Copyright (C) 2002, 2003, 2005, 2006, 2007, 2008 Free Software Foundation, Inc. -# -# This file is free software; the Free Software Foundation -# gives unlimited permission to copy and/or distribute it, -# with or without modifications, as long as this notice is preserved. - -# AM_AUTOMAKE_VERSION(VERSION) -# ---------------------------- -# Automake X.Y traces this macro to ensure aclocal.m4 has been -# generated from the m4 files accompanying Automake X.Y. -# (This private macro should not be called outside this file.) -AC_DEFUN([AM_AUTOMAKE_VERSION], -[am__api_version='1.11' -dnl Some users find AM_AUTOMAKE_VERSION and mistake it for a way to -dnl require some minimum version. Point them to the right macro. -m4_if([$1], [1.11.1], [], - [AC_FATAL([Do not call $0, use AM_INIT_AUTOMAKE([$1]).])])dnl -]) - -# _AM_AUTOCONF_VERSION(VERSION) -# ----------------------------- -# aclocal traces this macro to find the Autoconf version. -# This is a private macro too. Using m4_define simplifies -# the logic in aclocal, which can simply ignore this definition. -m4_define([_AM_AUTOCONF_VERSION], []) - -# AM_SET_CURRENT_AUTOMAKE_VERSION -# ------------------------------- -# Call AM_AUTOMAKE_VERSION and AM_AUTOMAKE_VERSION so they can be traced. -# This function is AC_REQUIREd by AM_INIT_AUTOMAKE. -AC_DEFUN([AM_SET_CURRENT_AUTOMAKE_VERSION], -[AM_AUTOMAKE_VERSION([1.11.1])dnl -m4_ifndef([AC_AUTOCONF_VERSION], - [m4_copy([m4_PACKAGE_VERSION], [AC_AUTOCONF_VERSION])])dnl -_AM_AUTOCONF_VERSION(m4_defn([AC_AUTOCONF_VERSION]))]) - -# Figure out how to run the assembler. -*- Autoconf -*- - -# Copyright (C) 2001, 2003, 2004, 2005, 2006 Free Software Foundation, Inc. -# -# This file is free software; the Free Software Foundation -# gives unlimited permission to copy and/or distribute it, -# with or without modifications, as long as this notice is preserved. - -# serial 5 - -# AM_PROG_AS -# ---------- -AC_DEFUN([AM_PROG_AS], -[# By default we simply use the C compiler to build assembly code. -AC_REQUIRE([AC_PROG_CC]) -test "${CCAS+set}" = set || CCAS=$CC -test "${CCASFLAGS+set}" = set || CCASFLAGS=$CFLAGS -AC_ARG_VAR([CCAS], [assembler compiler command (defaults to CC)]) -AC_ARG_VAR([CCASFLAGS], [assembler compiler flags (defaults to CFLAGS)]) -_AM_IF_OPTION([no-dependencies],, [_AM_DEPENDENCIES([CCAS])])dnl -]) - -# AM_AUX_DIR_EXPAND -*- Autoconf -*- - -# Copyright (C) 2001, 2003, 2005 Free Software Foundation, Inc. -# -# This file is free software; the Free Software Foundation -# gives unlimited permission to copy and/or distribute it, -# with or without modifications, as long as this notice is preserved. - -# For projects using AC_CONFIG_AUX_DIR([foo]), Autoconf sets -# $ac_aux_dir to `$srcdir/foo'. In other projects, it is set to -# `$srcdir', `$srcdir/..', or `$srcdir/../..'. -# -# Of course, Automake must honor this variable whenever it calls a -# tool from the auxiliary directory. The problem is that $srcdir (and -# therefore $ac_aux_dir as well) can be either absolute or relative, -# depending on how configure is run. This is pretty annoying, since -# it makes $ac_aux_dir quite unusable in subdirectories: in the top -# source directory, any form will work fine, but in subdirectories a -# relative path needs to be adjusted first. -# -# $ac_aux_dir/missing -# fails when called from a subdirectory if $ac_aux_dir is relative -# $top_srcdir/$ac_aux_dir/missing -# fails if $ac_aux_dir is absolute, -# fails when called from a subdirectory in a VPATH build with -# a relative $ac_aux_dir -# -# The reason of the latter failure is that $top_srcdir and $ac_aux_dir -# are both prefixed by $srcdir. In an in-source build this is usually -# harmless because $srcdir is `.', but things will broke when you -# start a VPATH build or use an absolute $srcdir. -# -# So we could use something similar to $top_srcdir/$ac_aux_dir/missing, -# iff we strip the leading $srcdir from $ac_aux_dir. That would be: -# am_aux_dir='\$(top_srcdir)/'`expr "$ac_aux_dir" : "$srcdir//*\(.*\)"` -# and then we would define $MISSING as -# MISSING="\${SHELL} $am_aux_dir/missing" -# This will work as long as MISSING is not called from configure, because -# unfortunately $(top_srcdir) has no meaning in configure. -# However there are other variables, like CC, which are often used in -# configure, and could therefore not use this "fixed" $ac_aux_dir. -# -# Another solution, used here, is to always expand $ac_aux_dir to an -# absolute PATH. The drawback is that using absolute paths prevent a -# configured tree to be moved without reconfiguration. - -AC_DEFUN([AM_AUX_DIR_EXPAND], -[dnl Rely on autoconf to set up CDPATH properly. -AC_PREREQ([2.50])dnl -# expand $ac_aux_dir to an absolute path -am_aux_dir=`cd $ac_aux_dir && pwd` -]) - -# AM_CONDITIONAL -*- Autoconf -*- - -# Copyright (C) 1997, 2000, 2001, 2003, 2004, 2005, 2006, 2008 -# Free Software Foundation, Inc. -# -# This file is free software; the Free Software Foundation -# gives unlimited permission to copy and/or distribute it, -# with or without modifications, as long as this notice is preserved. - -# serial 9 - -# AM_CONDITIONAL(NAME, SHELL-CONDITION) -# ------------------------------------- -# Define a conditional. -AC_DEFUN([AM_CONDITIONAL], -[AC_PREREQ(2.52)dnl - ifelse([$1], [TRUE], [AC_FATAL([$0: invalid condition: $1])], - [$1], [FALSE], [AC_FATAL([$0: invalid condition: $1])])dnl -AC_SUBST([$1_TRUE])dnl -AC_SUBST([$1_FALSE])dnl -_AM_SUBST_NOTMAKE([$1_TRUE])dnl -_AM_SUBST_NOTMAKE([$1_FALSE])dnl -m4_define([_AM_COND_VALUE_$1], [$2])dnl -if $2; then - $1_TRUE= - $1_FALSE='#' -else - $1_TRUE='#' - $1_FALSE= -fi -AC_CONFIG_COMMANDS_PRE( -[if test -z "${$1_TRUE}" && test -z "${$1_FALSE}"; then - AC_MSG_ERROR([[conditional "$1" was never defined. -Usually this means the macro was only invoked conditionally.]]) -fi])]) - -# Copyright (C) 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2009 -# Free Software Foundation, Inc. -# -# This file is free software; the Free Software Foundation -# gives unlimited permission to copy and/or distribute it, -# with or without modifications, as long as this notice is preserved. - -# serial 10 - -# There are a few dirty hacks below to avoid letting `AC_PROG_CC' be -# written in clear, in which case automake, when reading aclocal.m4, -# will think it sees a *use*, and therefore will trigger all it's -# C support machinery. Also note that it means that autoscan, seeing -# CC etc. in the Makefile, will ask for an AC_PROG_CC use... - - -# _AM_DEPENDENCIES(NAME) -# ---------------------- -# See how the compiler implements dependency checking. -# NAME is "CC", "CXX", "GCJ", or "OBJC". -# We try a few techniques and use that to set a single cache variable. -# -# We don't AC_REQUIRE the corresponding AC_PROG_CC since the latter was -# modified to invoke _AM_DEPENDENCIES(CC); we would have a circular -# dependency, and given that the user is not expected to run this macro, -# just rely on AC_PROG_CC. -AC_DEFUN([_AM_DEPENDENCIES], -[AC_REQUIRE([AM_SET_DEPDIR])dnl -AC_REQUIRE([AM_OUTPUT_DEPENDENCY_COMMANDS])dnl -AC_REQUIRE([AM_MAKE_INCLUDE])dnl -AC_REQUIRE([AM_DEP_TRACK])dnl - -ifelse([$1], CC, [depcc="$CC" am_compiler_list=], - [$1], CXX, [depcc="$CXX" am_compiler_list=], - [$1], OBJC, [depcc="$OBJC" am_compiler_list='gcc3 gcc'], - [$1], UPC, [depcc="$UPC" am_compiler_list=], - [$1], GCJ, [depcc="$GCJ" am_compiler_list='gcc3 gcc'], - [depcc="$$1" am_compiler_list=]) - -AC_CACHE_CHECK([dependency style of $depcc], - [am_cv_$1_dependencies_compiler_type], -[if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then - # We make a subdir and do the tests there. Otherwise we can end up - # making bogus files that we don't know about and never remove. For - # instance it was reported that on HP-UX the gcc test will end up - # making a dummy file named `D' -- because `-MD' means `put the output - # in D'. - mkdir conftest.dir - # Copy depcomp to subdir because otherwise we won't find it if we're - # using a relative directory. - cp "$am_depcomp" conftest.dir - cd conftest.dir - # We will build objects and dependencies in a subdirectory because - # it helps to detect inapplicable dependency modes. For instance - # both Tru64's cc and ICC support -MD to output dependencies as a - # side effect of compilation, but ICC will put the dependencies in - # the current directory while Tru64 will put them in the object - # directory. - mkdir sub - - am_cv_$1_dependencies_compiler_type=none - if test "$am_compiler_list" = ""; then - am_compiler_list=`sed -n ['s/^#*\([a-zA-Z0-9]*\))$/\1/p'] < ./depcomp` - fi - am__universal=false - m4_case([$1], [CC], - [case " $depcc " in #( - *\ -arch\ *\ -arch\ *) am__universal=true ;; - esac], - [CXX], - [case " $depcc " in #( - *\ -arch\ *\ -arch\ *) am__universal=true ;; - esac]) - - for depmode in $am_compiler_list; do - # Setup a source with many dependencies, because some compilers - # like to wrap large dependency lists on column 80 (with \), and - # we should not choose a depcomp mode which is confused by this. - # - # We need to recreate these files for each test, as the compiler may - # overwrite some of them when testing with obscure command lines. - # This happens at least with the AIX C compiler. - : > sub/conftest.c - for i in 1 2 3 4 5 6; do - echo '#include "conftst'$i'.h"' >> sub/conftest.c - # Using `: > sub/conftst$i.h' creates only sub/conftst1.h with - # Solaris 8's {/usr,}/bin/sh. - touch sub/conftst$i.h - done - echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf - - # We check with `-c' and `-o' for the sake of the "dashmstdout" - # mode. It turns out that the SunPro C++ compiler does not properly - # handle `-M -o', and we need to detect this. Also, some Intel - # versions had trouble with output in subdirs - am__obj=sub/conftest.${OBJEXT-o} - am__minus_obj="-o $am__obj" - case $depmode in - gcc) - # This depmode causes a compiler race in universal mode. - test "$am__universal" = false || continue - ;; - nosideeffect) - # after this tag, mechanisms are not by side-effect, so they'll - # only be used when explicitly requested - if test "x$enable_dependency_tracking" = xyes; then - continue - else - break - fi - ;; - msvisualcpp | msvcmsys) - # This compiler won't grok `-c -o', but also, the minuso test has - # not run yet. These depmodes are late enough in the game, and - # so weak that their functioning should not be impacted. - am__obj=conftest.${OBJEXT-o} - am__minus_obj= - ;; - none) break ;; - esac - if depmode=$depmode \ - source=sub/conftest.c object=$am__obj \ - depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \ - $SHELL ./depcomp $depcc -c $am__minus_obj sub/conftest.c \ - >/dev/null 2>conftest.err && - grep sub/conftst1.h sub/conftest.Po > /dev/null 2>&1 && - grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 && - grep $am__obj sub/conftest.Po > /dev/null 2>&1 && - ${MAKE-make} -s -f confmf > /dev/null 2>&1; then - # icc doesn't choke on unknown options, it will just issue warnings - # or remarks (even with -Werror). So we grep stderr for any message - # that says an option was ignored or not supported. - # When given -MP, icc 7.0 and 7.1 complain thusly: - # icc: Command line warning: ignoring option '-M'; no argument required - # The diagnosis changed in icc 8.0: - # icc: Command line remark: option '-MP' not supported - if (grep 'ignoring option' conftest.err || - grep 'not supported' conftest.err) >/dev/null 2>&1; then :; else - am_cv_$1_dependencies_compiler_type=$depmode - break - fi - fi - done - - cd .. - rm -rf conftest.dir -else - am_cv_$1_dependencies_compiler_type=none -fi -]) -AC_SUBST([$1DEPMODE], [depmode=$am_cv_$1_dependencies_compiler_type]) -AM_CONDITIONAL([am__fastdep$1], [ - test "x$enable_dependency_tracking" != xno \ - && test "$am_cv_$1_dependencies_compiler_type" = gcc3]) -]) - - -# AM_SET_DEPDIR -# ------------- -# Choose a directory name for dependency files. -# This macro is AC_REQUIREd in _AM_DEPENDENCIES -AC_DEFUN([AM_SET_DEPDIR], -[AC_REQUIRE([AM_SET_LEADING_DOT])dnl -AC_SUBST([DEPDIR], ["${am__leading_dot}deps"])dnl -]) - - -# AM_DEP_TRACK -# ------------ -AC_DEFUN([AM_DEP_TRACK], -[AC_ARG_ENABLE(dependency-tracking, -[ --disable-dependency-tracking speeds up one-time build - --enable-dependency-tracking do not reject slow dependency extractors]) -if test "x$enable_dependency_tracking" != xno; then - am_depcomp="$ac_aux_dir/depcomp" - AMDEPBACKSLASH='\' -fi -AM_CONDITIONAL([AMDEP], [test "x$enable_dependency_tracking" != xno]) -AC_SUBST([AMDEPBACKSLASH])dnl -_AM_SUBST_NOTMAKE([AMDEPBACKSLASH])dnl -]) - -# Generate code to set up dependency tracking. -*- Autoconf -*- - -# Copyright (C) 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2008 -# Free Software Foundation, Inc. -# -# This file is free software; the Free Software Foundation -# gives unlimited permission to copy and/or distribute it, -# with or without modifications, as long as this notice is preserved. - -#serial 5 - -# _AM_OUTPUT_DEPENDENCY_COMMANDS -# ------------------------------ -AC_DEFUN([_AM_OUTPUT_DEPENDENCY_COMMANDS], -[{ - # Autoconf 2.62 quotes --file arguments for eval, but not when files - # are listed without --file. Let's play safe and only enable the eval - # if we detect the quoting. - case $CONFIG_FILES in - *\'*) eval set x "$CONFIG_FILES" ;; - *) set x $CONFIG_FILES ;; - esac - shift - for mf - do - # Strip MF so we end up with the name of the file. - mf=`echo "$mf" | sed -e 's/:.*$//'` - # Check whether this is an Automake generated Makefile or not. - # We used to match only the files named `Makefile.in', but - # some people rename them; so instead we look at the file content. - # Grep'ing the first line is not enough: some people post-process - # each Makefile.in and add a new line on top of each file to say so. - # Grep'ing the whole file is not good either: AIX grep has a line - # limit of 2048, but all sed's we know have understand at least 4000. - if sed -n 's,^#.*generated by automake.*,X,p' "$mf" | grep X >/dev/null 2>&1; then - dirpart=`AS_DIRNAME("$mf")` - else - continue - fi - # Extract the definition of DEPDIR, am__include, and am__quote - # from the Makefile without running `make'. - DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"` - test -z "$DEPDIR" && continue - am__include=`sed -n 's/^am__include = //p' < "$mf"` - test -z "am__include" && continue - am__quote=`sed -n 's/^am__quote = //p' < "$mf"` - # When using ansi2knr, U may be empty or an underscore; expand it - U=`sed -n 's/^U = //p' < "$mf"` - # Find all dependency output files, they are included files with - # $(DEPDIR) in their names. We invoke sed twice because it is the - # simplest approach to changing $(DEPDIR) to its actual value in the - # expansion. - for file in `sed -n " - s/^$am__include $am__quote\(.*(DEPDIR).*\)$am__quote"'$/\1/p' <"$mf" | \ - sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g' -e 's/\$U/'"$U"'/g'`; do - # Make sure the directory exists. - test -f "$dirpart/$file" && continue - fdir=`AS_DIRNAME(["$file"])` - AS_MKDIR_P([$dirpart/$fdir]) - # echo "creating $dirpart/$file" - echo '# dummy' > "$dirpart/$file" - done - done -} -])# _AM_OUTPUT_DEPENDENCY_COMMANDS - - -# AM_OUTPUT_DEPENDENCY_COMMANDS -# ----------------------------- -# This macro should only be invoked once -- use via AC_REQUIRE. -# -# This code is only required when automatic dependency tracking -# is enabled. FIXME. This creates each `.P' file that we will -# need in order to bootstrap the dependency handling code. -AC_DEFUN([AM_OUTPUT_DEPENDENCY_COMMANDS], -[AC_CONFIG_COMMANDS([depfiles], - [test x"$AMDEP_TRUE" != x"" || _AM_OUTPUT_DEPENDENCY_COMMANDS], - [AMDEP_TRUE="$AMDEP_TRUE" ac_aux_dir="$ac_aux_dir"]) -]) - -# Copyright (C) 1996, 1997, 2000, 2001, 2003, 2005 -# Free Software Foundation, Inc. -# -# This file is free software; the Free Software Foundation -# gives unlimited permission to copy and/or distribute it, -# with or without modifications, as long as this notice is preserved. - -# serial 8 - -# AM_CONFIG_HEADER is obsolete. It has been replaced by AC_CONFIG_HEADERS. -AU_DEFUN([AM_CONFIG_HEADER], [AC_CONFIG_HEADERS($@)]) - -# Do all the work for Automake. -*- Autoconf -*- - -# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, -# 2005, 2006, 2008, 2009 Free Software Foundation, Inc. -# -# This file is free software; the Free Software Foundation -# gives unlimited permission to copy and/or distribute it, -# with or without modifications, as long as this notice is preserved. - -# serial 16 - -# This macro actually does too much. Some checks are only needed if -# your package does certain things. But this isn't really a big deal. - -# AM_INIT_AUTOMAKE(PACKAGE, VERSION, [NO-DEFINE]) -# AM_INIT_AUTOMAKE([OPTIONS]) -# ----------------------------------------------- -# The call with PACKAGE and VERSION arguments is the old style -# call (pre autoconf-2.50), which is being phased out. PACKAGE -# and VERSION should now be passed to AC_INIT and removed from -# the call to AM_INIT_AUTOMAKE. -# We support both call styles for the transition. After -# the next Automake release, Autoconf can make the AC_INIT -# arguments mandatory, and then we can depend on a new Autoconf -# release and drop the old call support. -AC_DEFUN([AM_INIT_AUTOMAKE], -[AC_PREREQ([2.62])dnl -dnl Autoconf wants to disallow AM_ names. We explicitly allow -dnl the ones we care about. -m4_pattern_allow([^AM_[A-Z]+FLAGS$])dnl -AC_REQUIRE([AM_SET_CURRENT_AUTOMAKE_VERSION])dnl -AC_REQUIRE([AC_PROG_INSTALL])dnl -if test "`cd $srcdir && pwd`" != "`pwd`"; then - # Use -I$(srcdir) only when $(srcdir) != ., so that make's output - # is not polluted with repeated "-I." - AC_SUBST([am__isrc], [' -I$(srcdir)'])_AM_SUBST_NOTMAKE([am__isrc])dnl - # test to see if srcdir already configured - if test -f $srcdir/config.status; then - AC_MSG_ERROR([source directory already configured; run "make distclean" there first]) - fi -fi - -# test whether we have cygpath -if test -z "$CYGPATH_W"; then - if (cygpath --version) >/dev/null 2>/dev/null; then - CYGPATH_W='cygpath -w' - else - CYGPATH_W=echo - fi -fi -AC_SUBST([CYGPATH_W]) - -# Define the identity of the package. -dnl Distinguish between old-style and new-style calls. -m4_ifval([$2], -[m4_ifval([$3], [_AM_SET_OPTION([no-define])])dnl - AC_SUBST([PACKAGE], [$1])dnl - AC_SUBST([VERSION], [$2])], -[_AM_SET_OPTIONS([$1])dnl -dnl Diagnose old-style AC_INIT with new-style AM_AUTOMAKE_INIT. -m4_if(m4_ifdef([AC_PACKAGE_NAME], 1)m4_ifdef([AC_PACKAGE_VERSION], 1), 11,, - [m4_fatal([AC_INIT should be called with package and version arguments])])dnl - AC_SUBST([PACKAGE], ['AC_PACKAGE_TARNAME'])dnl - AC_SUBST([VERSION], ['AC_PACKAGE_VERSION'])])dnl - -_AM_IF_OPTION([no-define],, -[AC_DEFINE_UNQUOTED(PACKAGE, "$PACKAGE", [Name of package]) - AC_DEFINE_UNQUOTED(VERSION, "$VERSION", [Version number of package])])dnl - -# Some tools Automake needs. -AC_REQUIRE([AM_SANITY_CHECK])dnl -AC_REQUIRE([AC_ARG_PROGRAM])dnl -AM_MISSING_PROG(ACLOCAL, aclocal-${am__api_version}) -AM_MISSING_PROG(AUTOCONF, autoconf) -AM_MISSING_PROG(AUTOMAKE, automake-${am__api_version}) -AM_MISSING_PROG(AUTOHEADER, autoheader) -AM_MISSING_PROG(MAKEINFO, makeinfo) -AC_REQUIRE([AM_PROG_INSTALL_SH])dnl -AC_REQUIRE([AM_PROG_INSTALL_STRIP])dnl -AC_REQUIRE([AM_PROG_MKDIR_P])dnl -# We need awk for the "check" target. The system "awk" is bad on -# some platforms. -AC_REQUIRE([AC_PROG_AWK])dnl -AC_REQUIRE([AC_PROG_MAKE_SET])dnl -AC_REQUIRE([AM_SET_LEADING_DOT])dnl -_AM_IF_OPTION([tar-ustar], [_AM_PROG_TAR([ustar])], - [_AM_IF_OPTION([tar-pax], [_AM_PROG_TAR([pax])], - [_AM_PROG_TAR([v7])])]) -_AM_IF_OPTION([no-dependencies],, -[AC_PROVIDE_IFELSE([AC_PROG_CC], - [_AM_DEPENDENCIES(CC)], - [define([AC_PROG_CC], - defn([AC_PROG_CC])[_AM_DEPENDENCIES(CC)])])dnl -AC_PROVIDE_IFELSE([AC_PROG_CXX], - [_AM_DEPENDENCIES(CXX)], - [define([AC_PROG_CXX], - defn([AC_PROG_CXX])[_AM_DEPENDENCIES(CXX)])])dnl -AC_PROVIDE_IFELSE([AC_PROG_OBJC], - [_AM_DEPENDENCIES(OBJC)], - [define([AC_PROG_OBJC], - defn([AC_PROG_OBJC])[_AM_DEPENDENCIES(OBJC)])])dnl -]) -_AM_IF_OPTION([silent-rules], [AC_REQUIRE([AM_SILENT_RULES])])dnl -dnl The `parallel-tests' driver may need to know about EXEEXT, so add the -dnl `am__EXEEXT' conditional if _AM_COMPILER_EXEEXT was seen. This macro -dnl is hooked onto _AC_COMPILER_EXEEXT early, see below. -AC_CONFIG_COMMANDS_PRE(dnl -[m4_provide_if([_AM_COMPILER_EXEEXT], - [AM_CONDITIONAL([am__EXEEXT], [test -n "$EXEEXT"])])])dnl -]) - -dnl Hook into `_AC_COMPILER_EXEEXT' early to learn its expansion. Do not -dnl add the conditional right here, as _AC_COMPILER_EXEEXT may be further -dnl mangled by Autoconf and run in a shell conditional statement. -m4_define([_AC_COMPILER_EXEEXT], -m4_defn([_AC_COMPILER_EXEEXT])[m4_provide([_AM_COMPILER_EXEEXT])]) - - -# When config.status generates a header, we must update the stamp-h file. -# This file resides in the same directory as the config header -# that is generated. The stamp files are numbered to have different names. - -# Autoconf calls _AC_AM_CONFIG_HEADER_HOOK (when defined) in the -# loop where config.status creates the headers, so we can generate -# our stamp files there. -AC_DEFUN([_AC_AM_CONFIG_HEADER_HOOK], -[# Compute $1's index in $config_headers. -_am_arg=$1 -_am_stamp_count=1 -for _am_header in $config_headers :; do - case $_am_header in - $_am_arg | $_am_arg:* ) - break ;; - * ) - _am_stamp_count=`expr $_am_stamp_count + 1` ;; - esac -done -echo "timestamp for $_am_arg" >`AS_DIRNAME(["$_am_arg"])`/stamp-h[]$_am_stamp_count]) - -# Copyright (C) 2001, 2003, 2005, 2008 Free Software Foundation, Inc. -# -# This file is free software; the Free Software Foundation -# gives unlimited permission to copy and/or distribute it, -# with or without modifications, as long as this notice is preserved. - -# AM_PROG_INSTALL_SH -# ------------------ -# Define $install_sh. -AC_DEFUN([AM_PROG_INSTALL_SH], -[AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl -if test x"${install_sh}" != xset; then - case $am_aux_dir in - *\ * | *\ *) - install_sh="\${SHELL} '$am_aux_dir/install-sh'" ;; - *) - install_sh="\${SHELL} $am_aux_dir/install-sh" - esac -fi -AC_SUBST(install_sh)]) - -# Copyright (C) 2003, 2005 Free Software Foundation, Inc. -# -# This file is free software; the Free Software Foundation -# gives unlimited permission to copy and/or distribute it, -# with or without modifications, as long as this notice is preserved. - -# serial 2 - -# Check whether the underlying file-system supports filenames -# with a leading dot. For instance MS-DOS doesn't. -AC_DEFUN([AM_SET_LEADING_DOT], -[rm -rf .tst 2>/dev/null -mkdir .tst 2>/dev/null -if test -d .tst; then - am__leading_dot=. -else - am__leading_dot=_ -fi -rmdir .tst 2>/dev/null -AC_SUBST([am__leading_dot])]) - -# Check to see how 'make' treats includes. -*- Autoconf -*- - -# Copyright (C) 2001, 2002, 2003, 2005, 2009 Free Software Foundation, Inc. -# -# This file is free software; the Free Software Foundation -# gives unlimited permission to copy and/or distribute it, -# with or without modifications, as long as this notice is preserved. - -# serial 4 - -# AM_MAKE_INCLUDE() -# ----------------- -# Check to see how make treats includes. -AC_DEFUN([AM_MAKE_INCLUDE], -[am_make=${MAKE-make} -cat > confinc << 'END' -am__doit: - @echo this is the am__doit target -.PHONY: am__doit -END -# If we don't find an include directive, just comment out the code. -AC_MSG_CHECKING([for style of include used by $am_make]) -am__include="#" -am__quote= -_am_result=none -# First try GNU make style include. -echo "include confinc" > confmf -# Ignore all kinds of additional output from `make'. -case `$am_make -s -f confmf 2> /dev/null` in #( -*the\ am__doit\ target*) - am__include=include - am__quote= - _am_result=GNU - ;; -esac -# Now try BSD make style include. -if test "$am__include" = "#"; then - echo '.include "confinc"' > confmf - case `$am_make -s -f confmf 2> /dev/null` in #( - *the\ am__doit\ target*) - am__include=.include - am__quote="\"" - _am_result=BSD - ;; - esac -fi -AC_SUBST([am__include]) -AC_SUBST([am__quote]) -AC_MSG_RESULT([$_am_result]) -rm -f confinc confmf -]) - -# Fake the existence of programs that GNU maintainers use. -*- Autoconf -*- - -# Copyright (C) 1997, 1999, 2000, 2001, 2003, 2004, 2005, 2008 -# Free Software Foundation, Inc. -# -# This file is free software; the Free Software Foundation -# gives unlimited permission to copy and/or distribute it, -# with or without modifications, as long as this notice is preserved. - -# serial 6 - -# AM_MISSING_PROG(NAME, PROGRAM) -# ------------------------------ -AC_DEFUN([AM_MISSING_PROG], -[AC_REQUIRE([AM_MISSING_HAS_RUN]) -$1=${$1-"${am_missing_run}$2"} -AC_SUBST($1)]) - - -# AM_MISSING_HAS_RUN -# ------------------ -# Define MISSING if not defined so far and test if it supports --run. -# If it does, set am_missing_run to use it, otherwise, to nothing. -AC_DEFUN([AM_MISSING_HAS_RUN], -[AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl -AC_REQUIRE_AUX_FILE([missing])dnl -if test x"${MISSING+set}" != xset; then - case $am_aux_dir in - *\ * | *\ *) - MISSING="\${SHELL} \"$am_aux_dir/missing\"" ;; - *) - MISSING="\${SHELL} $am_aux_dir/missing" ;; - esac -fi -# Use eval to expand $SHELL -if eval "$MISSING --run true"; then - am_missing_run="$MISSING --run " -else - am_missing_run= - AC_MSG_WARN([`missing' script is too old or missing]) -fi -]) - -# Copyright (C) 2003, 2004, 2005, 2006 Free Software Foundation, Inc. -# -# This file is free software; the Free Software Foundation -# gives unlimited permission to copy and/or distribute it, -# with or without modifications, as long as this notice is preserved. - -# AM_PROG_MKDIR_P -# --------------- -# Check for `mkdir -p'. -AC_DEFUN([AM_PROG_MKDIR_P], -[AC_PREREQ([2.60])dnl -AC_REQUIRE([AC_PROG_MKDIR_P])dnl -dnl Automake 1.8 to 1.9.6 used to define mkdir_p. We now use MKDIR_P, -dnl while keeping a definition of mkdir_p for backward compatibility. -dnl @MKDIR_P@ is magic: AC_OUTPUT adjusts its value for each Makefile. -dnl However we cannot define mkdir_p as $(MKDIR_P) for the sake of -dnl Makefile.ins that do not define MKDIR_P, so we do our own -dnl adjustment using top_builddir (which is defined more often than -dnl MKDIR_P). -AC_SUBST([mkdir_p], ["$MKDIR_P"])dnl -case $mkdir_p in - [[\\/$]]* | ?:[[\\/]]*) ;; - */*) mkdir_p="\$(top_builddir)/$mkdir_p" ;; -esac -]) - -# Helper functions for option handling. -*- Autoconf -*- - -# Copyright (C) 2001, 2002, 2003, 2005, 2008 Free Software Foundation, Inc. -# -# This file is free software; the Free Software Foundation -# gives unlimited permission to copy and/or distribute it, -# with or without modifications, as long as this notice is preserved. - -# serial 4 - -# _AM_MANGLE_OPTION(NAME) -# ----------------------- -AC_DEFUN([_AM_MANGLE_OPTION], -[[_AM_OPTION_]m4_bpatsubst($1, [[^a-zA-Z0-9_]], [_])]) - -# _AM_SET_OPTION(NAME) -# ------------------------------ -# Set option NAME. Presently that only means defining a flag for this option. -AC_DEFUN([_AM_SET_OPTION], -[m4_define(_AM_MANGLE_OPTION([$1]), 1)]) - -# _AM_SET_OPTIONS(OPTIONS) -# ---------------------------------- -# OPTIONS is a space-separated list of Automake options. -AC_DEFUN([_AM_SET_OPTIONS], -[m4_foreach_w([_AM_Option], [$1], [_AM_SET_OPTION(_AM_Option)])]) - -# _AM_IF_OPTION(OPTION, IF-SET, [IF-NOT-SET]) -# ------------------------------------------- -# Execute IF-SET if OPTION is set, IF-NOT-SET otherwise. -AC_DEFUN([_AM_IF_OPTION], -[m4_ifset(_AM_MANGLE_OPTION([$1]), [$2], [$3])]) - -# Check to make sure that the build environment is sane. -*- Autoconf -*- - -# Copyright (C) 1996, 1997, 2000, 2001, 2003, 2005, 2008 -# Free Software Foundation, Inc. -# -# This file is free software; the Free Software Foundation -# gives unlimited permission to copy and/or distribute it, -# with or without modifications, as long as this notice is preserved. - -# serial 5 - -# AM_SANITY_CHECK -# --------------- -AC_DEFUN([AM_SANITY_CHECK], -[AC_MSG_CHECKING([whether build environment is sane]) -# Just in case -sleep 1 -echo timestamp > conftest.file -# Reject unsafe characters in $srcdir or the absolute working directory -# name. Accept space and tab only in the latter. -am_lf=' -' -case `pwd` in - *[[\\\"\#\$\&\'\`$am_lf]]*) - AC_MSG_ERROR([unsafe absolute working directory name]);; -esac -case $srcdir in - *[[\\\"\#\$\&\'\`$am_lf\ \ ]]*) - AC_MSG_ERROR([unsafe srcdir value: `$srcdir']);; -esac - -# Do `set' in a subshell so we don't clobber the current shell's -# arguments. Must try -L first in case configure is actually a -# symlink; some systems play weird games with the mod time of symlinks -# (eg FreeBSD returns the mod time of the symlink's containing -# directory). -if ( - set X `ls -Lt "$srcdir/configure" conftest.file 2> /dev/null` - if test "$[*]" = "X"; then - # -L didn't work. - set X `ls -t "$srcdir/configure" conftest.file` - fi - rm -f conftest.file - if test "$[*]" != "X $srcdir/configure conftest.file" \ - && test "$[*]" != "X conftest.file $srcdir/configure"; then - - # If neither matched, then we have a broken ls. This can happen - # if, for instance, CONFIG_SHELL is bash and it inherits a - # broken ls alias from the environment. This has actually - # happened. Such a system could not be considered "sane". - AC_MSG_ERROR([ls -t appears to fail. Make sure there is not a broken -alias in your environment]) - fi - - test "$[2]" = conftest.file - ) -then - # Ok. - : -else - AC_MSG_ERROR([newly created file is older than distributed files! -Check your system clock]) -fi -AC_MSG_RESULT(yes)]) - -# Copyright (C) 2009 Free Software Foundation, Inc. -# -# This file is free software; the Free Software Foundation -# gives unlimited permission to copy and/or distribute it, -# with or without modifications, as long as this notice is preserved. - -# serial 1 - -# AM_SILENT_RULES([DEFAULT]) -# -------------------------- -# Enable less verbose build rules; with the default set to DEFAULT -# (`yes' being less verbose, `no' or empty being verbose). -AC_DEFUN([AM_SILENT_RULES], -[AC_ARG_ENABLE([silent-rules], -[ --enable-silent-rules less verbose build output (undo: `make V=1') - --disable-silent-rules verbose build output (undo: `make V=0')]) -case $enable_silent_rules in -yes) AM_DEFAULT_VERBOSITY=0;; -no) AM_DEFAULT_VERBOSITY=1;; -*) AM_DEFAULT_VERBOSITY=m4_if([$1], [yes], [0], [1]);; -esac -AC_SUBST([AM_DEFAULT_VERBOSITY])dnl -AM_BACKSLASH='\' -AC_SUBST([AM_BACKSLASH])dnl -_AM_SUBST_NOTMAKE([AM_BACKSLASH])dnl -]) - -# Copyright (C) 2001, 2003, 2005 Free Software Foundation, Inc. -# -# This file is free software; the Free Software Foundation -# gives unlimited permission to copy and/or distribute it, -# with or without modifications, as long as this notice is preserved. - -# AM_PROG_INSTALL_STRIP -# --------------------- -# One issue with vendor `install' (even GNU) is that you can't -# specify the program used to strip binaries. This is especially -# annoying in cross-compiling environments, where the build's strip -# is unlikely to handle the host's binaries. -# Fortunately install-sh will honor a STRIPPROG variable, so we -# always use install-sh in `make install-strip', and initialize -# STRIPPROG with the value of the STRIP variable (set by the user). -AC_DEFUN([AM_PROG_INSTALL_STRIP], -[AC_REQUIRE([AM_PROG_INSTALL_SH])dnl -# Installed binaries are usually stripped using `strip' when the user -# run `make install-strip'. However `strip' might not be the right -# tool to use in cross-compilation environments, therefore Automake -# will honor the `STRIP' environment variable to overrule this program. -dnl Don't test for $cross_compiling = yes, because it might be `maybe'. -if test "$cross_compiling" != no; then - AC_CHECK_TOOL([STRIP], [strip], :) -fi -INSTALL_STRIP_PROGRAM="\$(install_sh) -c -s" -AC_SUBST([INSTALL_STRIP_PROGRAM])]) - -# Copyright (C) 2006, 2008 Free Software Foundation, Inc. -# -# This file is free software; the Free Software Foundation -# gives unlimited permission to copy and/or distribute it, -# with or without modifications, as long as this notice is preserved. - -# serial 2 - -# _AM_SUBST_NOTMAKE(VARIABLE) -# --------------------------- -# Prevent Automake from outputting VARIABLE = @VARIABLE@ in Makefile.in. -# This macro is traced by Automake. -AC_DEFUN([_AM_SUBST_NOTMAKE]) - -# AM_SUBST_NOTMAKE(VARIABLE) -# --------------------------- -# Public sister of _AM_SUBST_NOTMAKE. -AC_DEFUN([AM_SUBST_NOTMAKE], [_AM_SUBST_NOTMAKE($@)]) - -# Check how to create a tarball. -*- Autoconf -*- - -# Copyright (C) 2004, 2005 Free Software Foundation, Inc. -# -# This file is free software; the Free Software Foundation -# gives unlimited permission to copy and/or distribute it, -# with or without modifications, as long as this notice is preserved. - -# serial 2 - -# _AM_PROG_TAR(FORMAT) -# -------------------- -# Check how to create a tarball in format FORMAT. -# FORMAT should be one of `v7', `ustar', or `pax'. -# -# Substitute a variable $(am__tar) that is a command -# writing to stdout a FORMAT-tarball containing the directory -# $tardir. -# tardir=directory && $(am__tar) > result.tar -# -# Substitute a variable $(am__untar) that extract such -# a tarball read from stdin. -# $(am__untar) < result.tar -AC_DEFUN([_AM_PROG_TAR], -[# Always define AMTAR for backward compatibility. -AM_MISSING_PROG([AMTAR], [tar]) -m4_if([$1], [v7], - [am__tar='${AMTAR} chof - "$$tardir"'; am__untar='${AMTAR} xf -'], - [m4_case([$1], [ustar],, [pax],, - [m4_fatal([Unknown tar format])]) -AC_MSG_CHECKING([how to create a $1 tar archive]) -# Loop over all known methods to create a tar archive until one works. -_am_tools='gnutar m4_if([$1], [ustar], [plaintar]) pax cpio none' -_am_tools=${am_cv_prog_tar_$1-$_am_tools} -# Do not fold the above two line into one, because Tru64 sh and -# Solaris sh will not grok spaces in the rhs of `-'. -for _am_tool in $_am_tools -do - case $_am_tool in - gnutar) - for _am_tar in tar gnutar gtar; - do - AM_RUN_LOG([$_am_tar --version]) && break - done - am__tar="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf - "'"$$tardir"' - am__tar_="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf - "'"$tardir"' - am__untar="$_am_tar -xf -" - ;; - plaintar) - # Must skip GNU tar: if it does not support --format= it doesn't create - # ustar tarball either. - (tar --version) >/dev/null 2>&1 && continue - am__tar='tar chf - "$$tardir"' - am__tar_='tar chf - "$tardir"' - am__untar='tar xf -' - ;; - pax) - am__tar='pax -L -x $1 -w "$$tardir"' - am__tar_='pax -L -x $1 -w "$tardir"' - am__untar='pax -r' - ;; - cpio) - am__tar='find "$$tardir" -print | cpio -o -H $1 -L' - am__tar_='find "$tardir" -print | cpio -o -H $1 -L' - am__untar='cpio -i -H $1 -d' - ;; - none) - am__tar=false - am__tar_=false - am__untar=false - ;; - esac - - # If the value was cached, stop now. We just wanted to have am__tar - # and am__untar set. - test -n "${am_cv_prog_tar_$1}" && break - - # tar/untar a dummy directory, and stop if the command works - rm -rf conftest.dir - mkdir conftest.dir - echo GrepMe > conftest.dir/file - AM_RUN_LOG([tardir=conftest.dir && eval $am__tar_ >conftest.tar]) - rm -rf conftest.dir - if test -s conftest.tar; then - AM_RUN_LOG([$am__untar <conftest.tar]) - grep GrepMe conftest.dir/file >/dev/null 2>&1 && break - fi -done -rm -rf conftest.dir - -AC_CACHE_VAL([am_cv_prog_tar_$1], [am_cv_prog_tar_$1=$_am_tool]) -AC_MSG_RESULT([$am_cv_prog_tar_$1])]) -AC_SUBST([am__tar]) -AC_SUBST([am__untar]) -]) # _AM_PROG_TAR - diff --git a/pixman/autogen.sh b/pixman/autogen.sh new file mode 100644 index 000000000..c0c20d541 --- /dev/null +++ b/pixman/autogen.sh @@ -0,0 +1,12 @@ +#! /bin/sh
+
+srcdir=`dirname $0`
+test -z "$srcdir" && srcdir=.
+
+ORIGDIR=`pwd`
+cd $srcdir
+
+autoreconf -v --install || exit 1
+cd $ORIGDIR || exit $?
+
+$srcdir/configure "$@"
diff --git a/pixman/config.guess b/pixman/config.guess deleted file mode 100644 index da8331460..000000000 --- a/pixman/config.guess +++ /dev/null @@ -1,1561 +0,0 @@ -#! /bin/sh -# Attempt to guess a canonical system name. -# Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, -# 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008 -# Free Software Foundation, Inc. - -timestamp='2009-04-27' - -# This file is free software; you can redistribute it and/or modify it -# under the terms of the GNU General Public License as published by -# the Free Software Foundation; either version 2 of the License, or -# (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, but -# WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU -# General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 51 Franklin Street - Fifth Floor, Boston, MA -# 02110-1301, USA. -# -# As a special exception to the GNU General Public License, if you -# distribute this file as part of a program that contains a -# configuration script generated by Autoconf, you may include it under -# the same distribution terms that you use for the rest of that program. - - -# Originally written by Per Bothner <per@bothner.com>. -# Please send patches to <config-patches@gnu.org>. Submit a context -# diff and a properly formatted ChangeLog entry. -# -# This script attempts to guess a canonical system name similar to -# config.sub. If it succeeds, it prints the system name on stdout, and -# exits with 0. Otherwise, it exits with 1. -# -# The plan is that this can be called by configure scripts if you -# don't specify an explicit build system type. - -me=`echo "$0" | sed -e 's,.*/,,'` - -usage="\ -Usage: $0 [OPTION] - -Output the configuration name of the system \`$me' is run on. - -Operation modes: - -h, --help print this help, then exit - -t, --time-stamp print date of last modification, then exit - -v, --version print version number, then exit - -Report bugs and patches to <config-patches@gnu.org>." - -version="\ -GNU config.guess ($timestamp) - -Originally written by Per Bothner. -Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, -2002, 2003, 2004, 2005, 2006, 2007, 2008 Free Software Foundation, Inc. - -This is free software; see the source for copying conditions. There is NO -warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE." - -help=" -Try \`$me --help' for more information." - -# Parse command line -while test $# -gt 0 ; do - case $1 in - --time-stamp | --time* | -t ) - echo "$timestamp" ; exit ;; - --version | -v ) - echo "$version" ; exit ;; - --help | --h* | -h ) - echo "$usage"; exit ;; - -- ) # Stop option processing - shift; break ;; - - ) # Use stdin as input. - break ;; - -* ) - echo "$me: invalid option $1$help" >&2 - exit 1 ;; - * ) - break ;; - esac -done - -if test $# != 0; then - echo "$me: too many arguments$help" >&2 - exit 1 -fi - -trap 'exit 1' 1 2 15 - -# CC_FOR_BUILD -- compiler used by this script. Note that the use of a -# compiler to aid in system detection is discouraged as it requires -# temporary files to be created and, as you can see below, it is a -# headache to deal with in a portable fashion. - -# Historically, `CC_FOR_BUILD' used to be named `HOST_CC'. We still -# use `HOST_CC' if defined, but it is deprecated. - -# Portable tmp directory creation inspired by the Autoconf team. - -set_cc_for_build=' -trap "exitcode=\$?; (rm -f \$tmpfiles 2>/dev/null; rmdir \$tmp 2>/dev/null) && exit \$exitcode" 0 ; -trap "rm -f \$tmpfiles 2>/dev/null; rmdir \$tmp 2>/dev/null; exit 1" 1 2 13 15 ; -: ${TMPDIR=/tmp} ; - { tmp=`(umask 077 && mktemp -d "$TMPDIR/cgXXXXXX") 2>/dev/null` && test -n "$tmp" && test -d "$tmp" ; } || - { test -n "$RANDOM" && tmp=$TMPDIR/cg$$-$RANDOM && (umask 077 && mkdir $tmp) ; } || - { tmp=$TMPDIR/cg-$$ && (umask 077 && mkdir $tmp) && echo "Warning: creating insecure temp directory" >&2 ; } || - { echo "$me: cannot create a temporary directory in $TMPDIR" >&2 ; exit 1 ; } ; -dummy=$tmp/dummy ; -tmpfiles="$dummy.c $dummy.o $dummy.rel $dummy" ; -case $CC_FOR_BUILD,$HOST_CC,$CC in - ,,) echo "int x;" > $dummy.c ; - for c in cc gcc c89 c99 ; do - if ($c -c -o $dummy.o $dummy.c) >/dev/null 2>&1 ; then - CC_FOR_BUILD="$c"; break ; - fi ; - done ; - if test x"$CC_FOR_BUILD" = x ; then - CC_FOR_BUILD=no_compiler_found ; - fi - ;; - ,,*) CC_FOR_BUILD=$CC ;; - ,*,*) CC_FOR_BUILD=$HOST_CC ;; -esac ; set_cc_for_build= ;' - -# This is needed to find uname on a Pyramid OSx when run in the BSD universe. -# (ghazi@noc.rutgers.edu 1994-08-24) -if (test -f /.attbin/uname) >/dev/null 2>&1 ; then - PATH=$PATH:/.attbin ; export PATH -fi - -UNAME_MACHINE=`(uname -m) 2>/dev/null` || UNAME_MACHINE=unknown -UNAME_RELEASE=`(uname -r) 2>/dev/null` || UNAME_RELEASE=unknown -UNAME_SYSTEM=`(uname -s) 2>/dev/null` || UNAME_SYSTEM=unknown -UNAME_VERSION=`(uname -v) 2>/dev/null` || UNAME_VERSION=unknown - -# Note: order is significant - the case branches are not exclusive. - -case "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" in - *:NetBSD:*:*) - # NetBSD (nbsd) targets should (where applicable) match one or - # more of the tupples: *-*-netbsdelf*, *-*-netbsdaout*, - # *-*-netbsdecoff* and *-*-netbsd*. For targets that recently - # switched to ELF, *-*-netbsd* would select the old - # object file format. This provides both forward - # compatibility and a consistent mechanism for selecting the - # object file format. - # - # Note: NetBSD doesn't particularly care about the vendor - # portion of the name. We always set it to "unknown". - sysctl="sysctl -n hw.machine_arch" - UNAME_MACHINE_ARCH=`(/sbin/$sysctl 2>/dev/null || \ - /usr/sbin/$sysctl 2>/dev/null || echo unknown)` - case "${UNAME_MACHINE_ARCH}" in - armeb) machine=armeb-unknown ;; - arm*) machine=arm-unknown ;; - sh3el) machine=shl-unknown ;; - sh3eb) machine=sh-unknown ;; - sh5el) machine=sh5le-unknown ;; - *) machine=${UNAME_MACHINE_ARCH}-unknown ;; - esac - # The Operating System including object format, if it has switched - # to ELF recently, or will in the future. - case "${UNAME_MACHINE_ARCH}" in - arm*|i386|m68k|ns32k|sh3*|sparc|vax) - eval $set_cc_for_build - if echo __ELF__ | $CC_FOR_BUILD -E - 2>/dev/null \ - | grep __ELF__ >/dev/null - then - # Once all utilities can be ECOFF (netbsdecoff) or a.out (netbsdaout). - # Return netbsd for either. FIX? - os=netbsd - else - os=netbsdelf - fi - ;; - *) - os=netbsd - ;; - esac - # The OS release - # Debian GNU/NetBSD machines have a different userland, and - # thus, need a distinct triplet. However, they do not need - # kernel version information, so it can be replaced with a - # suitable tag, in the style of linux-gnu. - case "${UNAME_VERSION}" in - Debian*) - release='-gnu' - ;; - *) - release=`echo ${UNAME_RELEASE}|sed -e 's/[-_].*/\./'` - ;; - esac - # Since CPU_TYPE-MANUFACTURER-KERNEL-OPERATING_SYSTEM: - # contains redundant information, the shorter form: - # CPU_TYPE-MANUFACTURER-OPERATING_SYSTEM is used. - echo "${machine}-${os}${release}" - exit ;; - *:OpenBSD:*:*) - UNAME_MACHINE_ARCH=`arch | sed 's/OpenBSD.//'` - echo ${UNAME_MACHINE_ARCH}-unknown-openbsd${UNAME_RELEASE} - exit ;; - *:ekkoBSD:*:*) - echo ${UNAME_MACHINE}-unknown-ekkobsd${UNAME_RELEASE} - exit ;; - *:SolidBSD:*:*) - echo ${UNAME_MACHINE}-unknown-solidbsd${UNAME_RELEASE} - exit ;; - macppc:MirBSD:*:*) - echo powerpc-unknown-mirbsd${UNAME_RELEASE} - exit ;; - *:MirBSD:*:*) - echo ${UNAME_MACHINE}-unknown-mirbsd${UNAME_RELEASE} - exit ;; - alpha:OSF1:*:*) - case $UNAME_RELEASE in - *4.0) - UNAME_RELEASE=`/usr/sbin/sizer -v | awk '{print $3}'` - ;; - *5.*) - UNAME_RELEASE=`/usr/sbin/sizer -v | awk '{print $4}'` - ;; - esac - # According to Compaq, /usr/sbin/psrinfo has been available on - # OSF/1 and Tru64 systems produced since 1995. I hope that - # covers most systems running today. This code pipes the CPU - # types through head -n 1, so we only detect the type of CPU 0. - ALPHA_CPU_TYPE=`/usr/sbin/psrinfo -v | sed -n -e 's/^ The alpha \(.*\) processor.*$/\1/p' | head -n 1` - case "$ALPHA_CPU_TYPE" in - "EV4 (21064)") - UNAME_MACHINE="alpha" ;; - "EV4.5 (21064)") - UNAME_MACHINE="alpha" ;; - "LCA4 (21066/21068)") - UNAME_MACHINE="alpha" ;; - "EV5 (21164)") - UNAME_MACHINE="alphaev5" ;; - "EV5.6 (21164A)") - UNAME_MACHINE="alphaev56" ;; - "EV5.6 (21164PC)") - UNAME_MACHINE="alphapca56" ;; - "EV5.7 (21164PC)") - UNAME_MACHINE="alphapca57" ;; - "EV6 (21264)") - UNAME_MACHINE="alphaev6" ;; - "EV6.7 (21264A)") - UNAME_MACHINE="alphaev67" ;; - "EV6.8CB (21264C)") - UNAME_MACHINE="alphaev68" ;; - "EV6.8AL (21264B)") - UNAME_MACHINE="alphaev68" ;; - "EV6.8CX (21264D)") - UNAME_MACHINE="alphaev68" ;; - "EV6.9A (21264/EV69A)") - UNAME_MACHINE="alphaev69" ;; - "EV7 (21364)") - UNAME_MACHINE="alphaev7" ;; - "EV7.9 (21364A)") - UNAME_MACHINE="alphaev79" ;; - esac - # A Pn.n version is a patched version. - # A Vn.n version is a released version. - # A Tn.n version is a released field test version. - # A Xn.n version is an unreleased experimental baselevel. - # 1.2 uses "1.2" for uname -r. - echo ${UNAME_MACHINE}-dec-osf`echo ${UNAME_RELEASE} | sed -e 's/^[PVTX]//' | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'` - exit ;; - Alpha\ *:Windows_NT*:*) - # How do we know it's Interix rather than the generic POSIX subsystem? - # Should we change UNAME_MACHINE based on the output of uname instead - # of the specific Alpha model? - echo alpha-pc-interix - exit ;; - 21064:Windows_NT:50:3) - echo alpha-dec-winnt3.5 - exit ;; - Amiga*:UNIX_System_V:4.0:*) - echo m68k-unknown-sysv4 - exit ;; - *:[Aa]miga[Oo][Ss]:*:*) - echo ${UNAME_MACHINE}-unknown-amigaos - exit ;; - *:[Mm]orph[Oo][Ss]:*:*) - echo ${UNAME_MACHINE}-unknown-morphos - exit ;; - *:OS/390:*:*) - echo i370-ibm-openedition - exit ;; - *:z/VM:*:*) - echo s390-ibm-zvmoe - exit ;; - *:OS400:*:*) - echo powerpc-ibm-os400 - exit ;; - arm:RISC*:1.[012]*:*|arm:riscix:1.[012]*:*) - echo arm-acorn-riscix${UNAME_RELEASE} - exit ;; - arm:riscos:*:*|arm:RISCOS:*:*) - echo arm-unknown-riscos - exit ;; - SR2?01:HI-UX/MPP:*:* | SR8000:HI-UX/MPP:*:*) - echo hppa1.1-hitachi-hiuxmpp - exit ;; - Pyramid*:OSx*:*:* | MIS*:OSx*:*:* | MIS*:SMP_DC-OSx*:*:*) - # akee@wpdis03.wpafb.af.mil (Earle F. Ake) contributed MIS and NILE. - if test "`(/bin/universe) 2>/dev/null`" = att ; then - echo pyramid-pyramid-sysv3 - else - echo pyramid-pyramid-bsd - fi - exit ;; - NILE*:*:*:dcosx) - echo pyramid-pyramid-svr4 - exit ;; - DRS?6000:unix:4.0:6*) - echo sparc-icl-nx6 - exit ;; - DRS?6000:UNIX_SV:4.2*:7* | DRS?6000:isis:4.2*:7*) - case `/usr/bin/uname -p` in - sparc) echo sparc-icl-nx7; exit ;; - esac ;; - s390x:SunOS:*:*) - echo ${UNAME_MACHINE}-ibm-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'` - exit ;; - sun4H:SunOS:5.*:*) - echo sparc-hal-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'` - exit ;; - sun4*:SunOS:5.*:* | tadpole*:SunOS:5.*:*) - echo sparc-sun-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'` - exit ;; - i86pc:SunOS:5.*:* | i86xen:SunOS:5.*:*) - eval $set_cc_for_build - SUN_ARCH="i386" - # If there is a compiler, see if it is configured for 64-bit objects. - # Note that the Sun cc does not turn __LP64__ into 1 like gcc does. - # This test works for both compilers. - if [ "$CC_FOR_BUILD" != 'no_compiler_found' ]; then - if (echo '#ifdef __amd64'; echo IS_64BIT_ARCH; echo '#endif') | \ - (CCOPTS= $CC_FOR_BUILD -E - 2>/dev/null) | \ - grep IS_64BIT_ARCH >/dev/null - then - SUN_ARCH="x86_64" - fi - fi - echo ${SUN_ARCH}-pc-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'` - exit ;; - sun4*:SunOS:6*:*) - # According to config.sub, this is the proper way to canonicalize - # SunOS6. Hard to guess exactly what SunOS6 will be like, but - # it's likely to be more like Solaris than SunOS4. - echo sparc-sun-solaris3`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'` - exit ;; - sun4*:SunOS:*:*) - case "`/usr/bin/arch -k`" in - Series*|S4*) - UNAME_RELEASE=`uname -v` - ;; - esac - # Japanese Language versions have a version number like `4.1.3-JL'. - echo sparc-sun-sunos`echo ${UNAME_RELEASE}|sed -e 's/-/_/'` - exit ;; - sun3*:SunOS:*:*) - echo m68k-sun-sunos${UNAME_RELEASE} - exit ;; - sun*:*:4.2BSD:*) - UNAME_RELEASE=`(sed 1q /etc/motd | awk '{print substr($5,1,3)}') 2>/dev/null` - test "x${UNAME_RELEASE}" = "x" && UNAME_RELEASE=3 - case "`/bin/arch`" in - sun3) - echo m68k-sun-sunos${UNAME_RELEASE} - ;; - sun4) - echo sparc-sun-sunos${UNAME_RELEASE} - ;; - esac - exit ;; - aushp:SunOS:*:*) - echo sparc-auspex-sunos${UNAME_RELEASE} - exit ;; - # The situation for MiNT is a little confusing. The machine name - # can be virtually everything (everything which is not - # "atarist" or "atariste" at least should have a processor - # > m68000). The system name ranges from "MiNT" over "FreeMiNT" - # to the lowercase version "mint" (or "freemint"). Finally - # the system name "TOS" denotes a system which is actually not - # MiNT. But MiNT is downward compatible to TOS, so this should - # be no problem. - atarist[e]:*MiNT:*:* | atarist[e]:*mint:*:* | atarist[e]:*TOS:*:*) - echo m68k-atari-mint${UNAME_RELEASE} - exit ;; - atari*:*MiNT:*:* | atari*:*mint:*:* | atarist[e]:*TOS:*:*) - echo m68k-atari-mint${UNAME_RELEASE} - exit ;; - *falcon*:*MiNT:*:* | *falcon*:*mint:*:* | *falcon*:*TOS:*:*) - echo m68k-atari-mint${UNAME_RELEASE} - exit ;; - milan*:*MiNT:*:* | milan*:*mint:*:* | *milan*:*TOS:*:*) - echo m68k-milan-mint${UNAME_RELEASE} - exit ;; - hades*:*MiNT:*:* | hades*:*mint:*:* | *hades*:*TOS:*:*) - echo m68k-hades-mint${UNAME_RELEASE} - exit ;; - *:*MiNT:*:* | *:*mint:*:* | *:*TOS:*:*) - echo m68k-unknown-mint${UNAME_RELEASE} - exit ;; - m68k:machten:*:*) - echo m68k-apple-machten${UNAME_RELEASE} - exit ;; - powerpc:machten:*:*) - echo powerpc-apple-machten${UNAME_RELEASE} - exit ;; - RISC*:Mach:*:*) - echo mips-dec-mach_bsd4.3 - exit ;; - RISC*:ULTRIX:*:*) - echo mips-dec-ultrix${UNAME_RELEASE} - exit ;; - VAX*:ULTRIX*:*:*) - echo vax-dec-ultrix${UNAME_RELEASE} - exit ;; - 2020:CLIX:*:* | 2430:CLIX:*:*) - echo clipper-intergraph-clix${UNAME_RELEASE} - exit ;; - mips:*:*:UMIPS | mips:*:*:RISCos) - eval $set_cc_for_build - sed 's/^ //' << EOF >$dummy.c -#ifdef __cplusplus -#include <stdio.h> /* for printf() prototype */ - int main (int argc, char *argv[]) { -#else - int main (argc, argv) int argc; char *argv[]; { -#endif - #if defined (host_mips) && defined (MIPSEB) - #if defined (SYSTYPE_SYSV) - printf ("mips-mips-riscos%ssysv\n", argv[1]); exit (0); - #endif - #if defined (SYSTYPE_SVR4) - printf ("mips-mips-riscos%ssvr4\n", argv[1]); exit (0); - #endif - #if defined (SYSTYPE_BSD43) || defined(SYSTYPE_BSD) - printf ("mips-mips-riscos%sbsd\n", argv[1]); exit (0); - #endif - #endif - exit (-1); - } -EOF - $CC_FOR_BUILD -o $dummy $dummy.c && - dummyarg=`echo "${UNAME_RELEASE}" | sed -n 's/\([0-9]*\).*/\1/p'` && - SYSTEM_NAME=`$dummy $dummyarg` && - { echo "$SYSTEM_NAME"; exit; } - echo mips-mips-riscos${UNAME_RELEASE} - exit ;; - Motorola:PowerMAX_OS:*:*) - echo powerpc-motorola-powermax - exit ;; - Motorola:*:4.3:PL8-*) - echo powerpc-harris-powermax - exit ;; - Night_Hawk:*:*:PowerMAX_OS | Synergy:PowerMAX_OS:*:*) - echo powerpc-harris-powermax - exit ;; - Night_Hawk:Power_UNIX:*:*) - echo powerpc-harris-powerunix - exit ;; - m88k:CX/UX:7*:*) - echo m88k-harris-cxux7 - exit ;; - m88k:*:4*:R4*) - echo m88k-motorola-sysv4 - exit ;; - m88k:*:3*:R3*) - echo m88k-motorola-sysv3 - exit ;; - AViiON:dgux:*:*) - # DG/UX returns AViiON for all architectures - UNAME_PROCESSOR=`/usr/bin/uname -p` - if [ $UNAME_PROCESSOR = mc88100 ] || [ $UNAME_PROCESSOR = mc88110 ] - then - if [ ${TARGET_BINARY_INTERFACE}x = m88kdguxelfx ] || \ - [ ${TARGET_BINARY_INTERFACE}x = x ] - then - echo m88k-dg-dgux${UNAME_RELEASE} - else - echo m88k-dg-dguxbcs${UNAME_RELEASE} - fi - else - echo i586-dg-dgux${UNAME_RELEASE} - fi - exit ;; - M88*:DolphinOS:*:*) # DolphinOS (SVR3) - echo m88k-dolphin-sysv3 - exit ;; - M88*:*:R3*:*) - # Delta 88k system running SVR3 - echo m88k-motorola-sysv3 - exit ;; - XD88*:*:*:*) # Tektronix XD88 system running UTekV (SVR3) - echo m88k-tektronix-sysv3 - exit ;; - Tek43[0-9][0-9]:UTek:*:*) # Tektronix 4300 system running UTek (BSD) - echo m68k-tektronix-bsd - exit ;; - *:IRIX*:*:*) - echo mips-sgi-irix`echo ${UNAME_RELEASE}|sed -e 's/-/_/g'` - exit ;; - ????????:AIX?:[12].1:2) # AIX 2.2.1 or AIX 2.1.1 is RT/PC AIX. - echo romp-ibm-aix # uname -m gives an 8 hex-code CPU id - exit ;; # Note that: echo "'`uname -s`'" gives 'AIX ' - i*86:AIX:*:*) - echo i386-ibm-aix - exit ;; - ia64:AIX:*:*) - if [ -x /usr/bin/oslevel ] ; then - IBM_REV=`/usr/bin/oslevel` - else - IBM_REV=${UNAME_VERSION}.${UNAME_RELEASE} - fi - echo ${UNAME_MACHINE}-ibm-aix${IBM_REV} - exit ;; - *:AIX:2:3) - if grep bos325 /usr/include/stdio.h >/dev/null 2>&1; then - eval $set_cc_for_build - sed 's/^ //' << EOF >$dummy.c - #include <sys/systemcfg.h> - - main() - { - if (!__power_pc()) - exit(1); - puts("powerpc-ibm-aix3.2.5"); - exit(0); - } -EOF - if $CC_FOR_BUILD -o $dummy $dummy.c && SYSTEM_NAME=`$dummy` - then - echo "$SYSTEM_NAME" - else - echo rs6000-ibm-aix3.2.5 - fi - elif grep bos324 /usr/include/stdio.h >/dev/null 2>&1; then - echo rs6000-ibm-aix3.2.4 - else - echo rs6000-ibm-aix3.2 - fi - exit ;; - *:AIX:*:[456]) - IBM_CPU_ID=`/usr/sbin/lsdev -C -c processor -S available | sed 1q | awk '{ print $1 }'` - if /usr/sbin/lsattr -El ${IBM_CPU_ID} | grep ' POWER' >/dev/null 2>&1; then - IBM_ARCH=rs6000 - else - IBM_ARCH=powerpc - fi - if [ -x /usr/bin/oslevel ] ; then - IBM_REV=`/usr/bin/oslevel` - else - IBM_REV=${UNAME_VERSION}.${UNAME_RELEASE} - fi - echo ${IBM_ARCH}-ibm-aix${IBM_REV} - exit ;; - *:AIX:*:*) - echo rs6000-ibm-aix - exit ;; - ibmrt:4.4BSD:*|romp-ibm:BSD:*) - echo romp-ibm-bsd4.4 - exit ;; - ibmrt:*BSD:*|romp-ibm:BSD:*) # covers RT/PC BSD and - echo romp-ibm-bsd${UNAME_RELEASE} # 4.3 with uname added to - exit ;; # report: romp-ibm BSD 4.3 - *:BOSX:*:*) - echo rs6000-bull-bosx - exit ;; - DPX/2?00:B.O.S.:*:*) - echo m68k-bull-sysv3 - exit ;; - 9000/[34]??:4.3bsd:1.*:*) - echo m68k-hp-bsd - exit ;; - hp300:4.4BSD:*:* | 9000/[34]??:4.3bsd:2.*:*) - echo m68k-hp-bsd4.4 - exit ;; - 9000/[34678]??:HP-UX:*:*) - HPUX_REV=`echo ${UNAME_RELEASE}|sed -e 's/[^.]*.[0B]*//'` - case "${UNAME_MACHINE}" in - 9000/31? ) HP_ARCH=m68000 ;; - 9000/[34]?? ) HP_ARCH=m68k ;; - 9000/[678][0-9][0-9]) - if [ -x /usr/bin/getconf ]; then - sc_cpu_version=`/usr/bin/getconf SC_CPU_VERSION 2>/dev/null` - sc_kernel_bits=`/usr/bin/getconf SC_KERNEL_BITS 2>/dev/null` - case "${sc_cpu_version}" in - 523) HP_ARCH="hppa1.0" ;; # CPU_PA_RISC1_0 - 528) HP_ARCH="hppa1.1" ;; # CPU_PA_RISC1_1 - 532) # CPU_PA_RISC2_0 - case "${sc_kernel_bits}" in - 32) HP_ARCH="hppa2.0n" ;; - 64) HP_ARCH="hppa2.0w" ;; - '') HP_ARCH="hppa2.0" ;; # HP-UX 10.20 - esac ;; - esac - fi - if [ "${HP_ARCH}" = "" ]; then - eval $set_cc_for_build - sed 's/^ //' << EOF >$dummy.c - - #define _HPUX_SOURCE - #include <stdlib.h> - #include <unistd.h> - - int main () - { - #if defined(_SC_KERNEL_BITS) - long bits = sysconf(_SC_KERNEL_BITS); - #endif - long cpu = sysconf (_SC_CPU_VERSION); - - switch (cpu) - { - case CPU_PA_RISC1_0: puts ("hppa1.0"); break; - case CPU_PA_RISC1_1: puts ("hppa1.1"); break; - case CPU_PA_RISC2_0: - #if defined(_SC_KERNEL_BITS) - switch (bits) - { - case 64: puts ("hppa2.0w"); break; - case 32: puts ("hppa2.0n"); break; - default: puts ("hppa2.0"); break; - } break; - #else /* !defined(_SC_KERNEL_BITS) */ - puts ("hppa2.0"); break; - #endif - default: puts ("hppa1.0"); break; - } - exit (0); - } -EOF - (CCOPTS= $CC_FOR_BUILD -o $dummy $dummy.c 2>/dev/null) && HP_ARCH=`$dummy` - test -z "$HP_ARCH" && HP_ARCH=hppa - fi ;; - esac - if [ ${HP_ARCH} = "hppa2.0w" ] - then - eval $set_cc_for_build - - # hppa2.0w-hp-hpux* has a 64-bit kernel and a compiler generating - # 32-bit code. hppa64-hp-hpux* has the same kernel and a compiler - # generating 64-bit code. GNU and HP use different nomenclature: - # - # $ CC_FOR_BUILD=cc ./config.guess - # => hppa2.0w-hp-hpux11.23 - # $ CC_FOR_BUILD="cc +DA2.0w" ./config.guess - # => hppa64-hp-hpux11.23 - - if echo __LP64__ | (CCOPTS= $CC_FOR_BUILD -E - 2>/dev/null) | - grep __LP64__ >/dev/null - then - HP_ARCH="hppa2.0w" - else - HP_ARCH="hppa64" - fi - fi - echo ${HP_ARCH}-hp-hpux${HPUX_REV} - exit ;; - ia64:HP-UX:*:*) - HPUX_REV=`echo ${UNAME_RELEASE}|sed -e 's/[^.]*.[0B]*//'` - echo ia64-hp-hpux${HPUX_REV} - exit ;; - 3050*:HI-UX:*:*) - eval $set_cc_for_build - sed 's/^ //' << EOF >$dummy.c - #include <unistd.h> - int - main () - { - long cpu = sysconf (_SC_CPU_VERSION); - /* The order matters, because CPU_IS_HP_MC68K erroneously returns - true for CPU_PA_RISC1_0. CPU_IS_PA_RISC returns correct - results, however. */ - if (CPU_IS_PA_RISC (cpu)) - { - switch (cpu) - { - case CPU_PA_RISC1_0: puts ("hppa1.0-hitachi-hiuxwe2"); break; - case CPU_PA_RISC1_1: puts ("hppa1.1-hitachi-hiuxwe2"); break; - case CPU_PA_RISC2_0: puts ("hppa2.0-hitachi-hiuxwe2"); break; - default: puts ("hppa-hitachi-hiuxwe2"); break; - } - } - else if (CPU_IS_HP_MC68K (cpu)) - puts ("m68k-hitachi-hiuxwe2"); - else puts ("unknown-hitachi-hiuxwe2"); - exit (0); - } -EOF - $CC_FOR_BUILD -o $dummy $dummy.c && SYSTEM_NAME=`$dummy` && - { echo "$SYSTEM_NAME"; exit; } - echo unknown-hitachi-hiuxwe2 - exit ;; - 9000/7??:4.3bsd:*:* | 9000/8?[79]:4.3bsd:*:* ) - echo hppa1.1-hp-bsd - exit ;; - 9000/8??:4.3bsd:*:*) - echo hppa1.0-hp-bsd - exit ;; - *9??*:MPE/iX:*:* | *3000*:MPE/iX:*:*) - echo hppa1.0-hp-mpeix - exit ;; - hp7??:OSF1:*:* | hp8?[79]:OSF1:*:* ) - echo hppa1.1-hp-osf - exit ;; - hp8??:OSF1:*:*) - echo hppa1.0-hp-osf - exit ;; - i*86:OSF1:*:*) - if [ -x /usr/sbin/sysversion ] ; then - echo ${UNAME_MACHINE}-unknown-osf1mk - else - echo ${UNAME_MACHINE}-unknown-osf1 - fi - exit ;; - parisc*:Lites*:*:*) - echo hppa1.1-hp-lites - exit ;; - C1*:ConvexOS:*:* | convex:ConvexOS:C1*:*) - echo c1-convex-bsd - exit ;; - C2*:ConvexOS:*:* | convex:ConvexOS:C2*:*) - if getsysinfo -f scalar_acc - then echo c32-convex-bsd - else echo c2-convex-bsd - fi - exit ;; - C34*:ConvexOS:*:* | convex:ConvexOS:C34*:*) - echo c34-convex-bsd - exit ;; - C38*:ConvexOS:*:* | convex:ConvexOS:C38*:*) - echo c38-convex-bsd - exit ;; - C4*:ConvexOS:*:* | convex:ConvexOS:C4*:*) - echo c4-convex-bsd - exit ;; - CRAY*Y-MP:*:*:*) - echo ymp-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/' - exit ;; - CRAY*[A-Z]90:*:*:*) - echo ${UNAME_MACHINE}-cray-unicos${UNAME_RELEASE} \ - | sed -e 's/CRAY.*\([A-Z]90\)/\1/' \ - -e y/ABCDEFGHIJKLMNOPQRSTUVWXYZ/abcdefghijklmnopqrstuvwxyz/ \ - -e 's/\.[^.]*$/.X/' - exit ;; - CRAY*TS:*:*:*) - echo t90-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/' - exit ;; - CRAY*T3E:*:*:*) - echo alphaev5-cray-unicosmk${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/' - exit ;; - CRAY*SV1:*:*:*) - echo sv1-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/' - exit ;; - *:UNICOS/mp:*:*) - echo craynv-cray-unicosmp${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/' - exit ;; - F30[01]:UNIX_System_V:*:* | F700:UNIX_System_V:*:*) - FUJITSU_PROC=`uname -m | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'` - FUJITSU_SYS=`uname -p | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/\///'` - FUJITSU_REL=`echo ${UNAME_RELEASE} | sed -e 's/ /_/'` - echo "${FUJITSU_PROC}-fujitsu-${FUJITSU_SYS}${FUJITSU_REL}" - exit ;; - 5000:UNIX_System_V:4.*:*) - FUJITSU_SYS=`uname -p | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/\///'` - FUJITSU_REL=`echo ${UNAME_RELEASE} | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/ /_/'` - echo "sparc-fujitsu-${FUJITSU_SYS}${FUJITSU_REL}" - exit ;; - i*86:BSD/386:*:* | i*86:BSD/OS:*:* | *:Ascend\ Embedded/OS:*:*) - echo ${UNAME_MACHINE}-pc-bsdi${UNAME_RELEASE} - exit ;; - sparc*:BSD/OS:*:*) - echo sparc-unknown-bsdi${UNAME_RELEASE} - exit ;; - *:BSD/OS:*:*) - echo ${UNAME_MACHINE}-unknown-bsdi${UNAME_RELEASE} - exit ;; - *:FreeBSD:*:*) - case ${UNAME_MACHINE} in - pc98) - echo i386-unknown-freebsd`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'` ;; - amd64) - echo x86_64-unknown-freebsd`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'` ;; - *) - echo ${UNAME_MACHINE}-unknown-freebsd`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'` ;; - esac - exit ;; - i*:CYGWIN*:*) - echo ${UNAME_MACHINE}-pc-cygwin - exit ;; - *:MINGW*:*) - echo ${UNAME_MACHINE}-pc-mingw32 - exit ;; - i*:windows32*:*) - # uname -m includes "-pc" on this system. - echo ${UNAME_MACHINE}-mingw32 - exit ;; - i*:PW*:*) - echo ${UNAME_MACHINE}-pc-pw32 - exit ;; - *:Interix*:[3456]*) - case ${UNAME_MACHINE} in - x86) - echo i586-pc-interix${UNAME_RELEASE} - exit ;; - EM64T | authenticamd | genuineintel) - echo x86_64-unknown-interix${UNAME_RELEASE} - exit ;; - IA64) - echo ia64-unknown-interix${UNAME_RELEASE} - exit ;; - esac ;; - [345]86:Windows_95:* | [345]86:Windows_98:* | [345]86:Windows_NT:*) - echo i${UNAME_MACHINE}-pc-mks - exit ;; - i*:Windows_NT*:* | Pentium*:Windows_NT*:*) - # How do we know it's Interix rather than the generic POSIX subsystem? - # It also conflicts with pre-2.0 versions of AT&T UWIN. Should we - # UNAME_MACHINE based on the output of uname instead of i386? - echo i586-pc-interix - exit ;; - i*:UWIN*:*) - echo ${UNAME_MACHINE}-pc-uwin - exit ;; - amd64:CYGWIN*:*:* | x86_64:CYGWIN*:*:*) - echo x86_64-unknown-cygwin - exit ;; - p*:CYGWIN*:*) - echo powerpcle-unknown-cygwin - exit ;; - prep*:SunOS:5.*:*) - echo powerpcle-unknown-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'` - exit ;; - *:GNU:*:*) - # the GNU system - echo `echo ${UNAME_MACHINE}|sed -e 's,[-/].*$,,'`-unknown-gnu`echo ${UNAME_RELEASE}|sed -e 's,/.*$,,'` - exit ;; - *:GNU/*:*:*) - # other systems with GNU libc and userland - echo ${UNAME_MACHINE}-unknown-`echo ${UNAME_SYSTEM} | sed 's,^[^/]*/,,' | tr '[A-Z]' '[a-z]'``echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'`-gnu - exit ;; - i*86:Minix:*:*) - echo ${UNAME_MACHINE}-pc-minix - exit ;; - arm*:Linux:*:*) - eval $set_cc_for_build - if echo __ARM_EABI__ | $CC_FOR_BUILD -E - 2>/dev/null \ - | grep -q __ARM_EABI__ - then - echo ${UNAME_MACHINE}-unknown-linux-gnu - else - echo ${UNAME_MACHINE}-unknown-linux-gnueabi - fi - exit ;; - avr32*:Linux:*:*) - echo ${UNAME_MACHINE}-unknown-linux-gnu - exit ;; - cris:Linux:*:*) - echo cris-axis-linux-gnu - exit ;; - crisv32:Linux:*:*) - echo crisv32-axis-linux-gnu - exit ;; - frv:Linux:*:*) - echo frv-unknown-linux-gnu - exit ;; - ia64:Linux:*:*) - echo ${UNAME_MACHINE}-unknown-linux-gnu - exit ;; - m32r*:Linux:*:*) - echo ${UNAME_MACHINE}-unknown-linux-gnu - exit ;; - m68*:Linux:*:*) - echo ${UNAME_MACHINE}-unknown-linux-gnu - exit ;; - mips:Linux:*:*) - eval $set_cc_for_build - sed 's/^ //' << EOF >$dummy.c - #undef CPU - #undef mips - #undef mipsel - #if defined(__MIPSEL__) || defined(__MIPSEL) || defined(_MIPSEL) || defined(MIPSEL) - CPU=mipsel - #else - #if defined(__MIPSEB__) || defined(__MIPSEB) || defined(_MIPSEB) || defined(MIPSEB) - CPU=mips - #else - CPU= - #endif - #endif -EOF - eval "`$CC_FOR_BUILD -E $dummy.c 2>/dev/null | sed -n ' - /^CPU/{ - s: ::g - p - }'`" - test x"${CPU}" != x && { echo "${CPU}-unknown-linux-gnu"; exit; } - ;; - mips64:Linux:*:*) - eval $set_cc_for_build - sed 's/^ //' << EOF >$dummy.c - #undef CPU - #undef mips64 - #undef mips64el - #if defined(__MIPSEL__) || defined(__MIPSEL) || defined(_MIPSEL) || defined(MIPSEL) - CPU=mips64el - #else - #if defined(__MIPSEB__) || defined(__MIPSEB) || defined(_MIPSEB) || defined(MIPSEB) - CPU=mips64 - #else - CPU= - #endif - #endif -EOF - eval "`$CC_FOR_BUILD -E $dummy.c 2>/dev/null | sed -n ' - /^CPU/{ - s: ::g - p - }'`" - test x"${CPU}" != x && { echo "${CPU}-unknown-linux-gnu"; exit; } - ;; - or32:Linux:*:*) - echo or32-unknown-linux-gnu - exit ;; - ppc:Linux:*:*) - echo powerpc-unknown-linux-gnu - exit ;; - ppc64:Linux:*:*) - echo powerpc64-unknown-linux-gnu - exit ;; - alpha:Linux:*:*) - case `sed -n '/^cpu model/s/^.*: \(.*\)/\1/p' < /proc/cpuinfo` in - EV5) UNAME_MACHINE=alphaev5 ;; - EV56) UNAME_MACHINE=alphaev56 ;; - PCA56) UNAME_MACHINE=alphapca56 ;; - PCA57) UNAME_MACHINE=alphapca56 ;; - EV6) UNAME_MACHINE=alphaev6 ;; - EV67) UNAME_MACHINE=alphaev67 ;; - EV68*) UNAME_MACHINE=alphaev68 ;; - esac - objdump --private-headers /bin/sh | grep ld.so.1 >/dev/null - if test "$?" = 0 ; then LIBC="libc1" ; else LIBC="" ; fi - echo ${UNAME_MACHINE}-unknown-linux-gnu${LIBC} - exit ;; - padre:Linux:*:*) - echo sparc-unknown-linux-gnu - exit ;; - parisc:Linux:*:* | hppa:Linux:*:*) - # Look for CPU level - case `grep '^cpu[^a-z]*:' /proc/cpuinfo 2>/dev/null | cut -d' ' -f2` in - PA7*) echo hppa1.1-unknown-linux-gnu ;; - PA8*) echo hppa2.0-unknown-linux-gnu ;; - *) echo hppa-unknown-linux-gnu ;; - esac - exit ;; - parisc64:Linux:*:* | hppa64:Linux:*:*) - echo hppa64-unknown-linux-gnu - exit ;; - s390:Linux:*:* | s390x:Linux:*:*) - echo ${UNAME_MACHINE}-ibm-linux - exit ;; - sh64*:Linux:*:*) - echo ${UNAME_MACHINE}-unknown-linux-gnu - exit ;; - sh*:Linux:*:*) - echo ${UNAME_MACHINE}-unknown-linux-gnu - exit ;; - sparc:Linux:*:* | sparc64:Linux:*:*) - echo ${UNAME_MACHINE}-unknown-linux-gnu - exit ;; - vax:Linux:*:*) - echo ${UNAME_MACHINE}-dec-linux-gnu - exit ;; - x86_64:Linux:*:*) - echo x86_64-unknown-linux-gnu - exit ;; - xtensa*:Linux:*:*) - echo ${UNAME_MACHINE}-unknown-linux-gnu - exit ;; - i*86:Linux:*:*) - # The BFD linker knows what the default object file format is, so - # first see if it will tell us. cd to the root directory to prevent - # problems with other programs or directories called `ld' in the path. - # Set LC_ALL=C to ensure ld outputs messages in English. - ld_supported_targets=`cd /; LC_ALL=C ld --help 2>&1 \ - | sed -ne '/supported targets:/!d - s/[ ][ ]*/ /g - s/.*supported targets: *// - s/ .*// - p'` - case "$ld_supported_targets" in - elf32-i386) - TENTATIVE="${UNAME_MACHINE}-pc-linux-gnu" - ;; - a.out-i386-linux) - echo "${UNAME_MACHINE}-pc-linux-gnuaout" - exit ;; - "") - # Either a pre-BFD a.out linker (linux-gnuoldld) or - # one that does not give us useful --help. - echo "${UNAME_MACHINE}-pc-linux-gnuoldld" - exit ;; - esac - # Determine whether the default compiler is a.out or elf - eval $set_cc_for_build - sed 's/^ //' << EOF >$dummy.c - #include <features.h> - #ifdef __ELF__ - # ifdef __GLIBC__ - # if __GLIBC__ >= 2 - LIBC=gnu - # else - LIBC=gnulibc1 - # endif - # else - LIBC=gnulibc1 - # endif - #else - #if defined(__INTEL_COMPILER) || defined(__PGI) || defined(__SUNPRO_C) || defined(__SUNPRO_CC) - LIBC=gnu - #else - LIBC=gnuaout - #endif - #endif - #ifdef __dietlibc__ - LIBC=dietlibc - #endif -EOF - eval "`$CC_FOR_BUILD -E $dummy.c 2>/dev/null | sed -n ' - /^LIBC/{ - s: ::g - p - }'`" - test x"${LIBC}" != x && { - echo "${UNAME_MACHINE}-pc-linux-${LIBC}" - exit - } - test x"${TENTATIVE}" != x && { echo "${TENTATIVE}"; exit; } - ;; - i*86:DYNIX/ptx:4*:*) - # ptx 4.0 does uname -s correctly, with DYNIX/ptx in there. - # earlier versions are messed up and put the nodename in both - # sysname and nodename. - echo i386-sequent-sysv4 - exit ;; - i*86:UNIX_SV:4.2MP:2.*) - # Unixware is an offshoot of SVR4, but it has its own version - # number series starting with 2... - # I am not positive that other SVR4 systems won't match this, - # I just have to hope. -- rms. - # Use sysv4.2uw... so that sysv4* matches it. - echo ${UNAME_MACHINE}-pc-sysv4.2uw${UNAME_VERSION} - exit ;; - i*86:OS/2:*:*) - # If we were able to find `uname', then EMX Unix compatibility - # is probably installed. - echo ${UNAME_MACHINE}-pc-os2-emx - exit ;; - i*86:XTS-300:*:STOP) - echo ${UNAME_MACHINE}-unknown-stop - exit ;; - i*86:atheos:*:*) - echo ${UNAME_MACHINE}-unknown-atheos - exit ;; - i*86:syllable:*:*) - echo ${UNAME_MACHINE}-pc-syllable - exit ;; - i*86:LynxOS:2.*:* | i*86:LynxOS:3.[01]*:* | i*86:LynxOS:4.0*:*) - echo i386-unknown-lynxos${UNAME_RELEASE} - exit ;; - i*86:*DOS:*:*) - echo ${UNAME_MACHINE}-pc-msdosdjgpp - exit ;; - i*86:*:4.*:* | i*86:SYSTEM_V:4.*:*) - UNAME_REL=`echo ${UNAME_RELEASE} | sed 's/\/MP$//'` - if grep Novell /usr/include/link.h >/dev/null 2>/dev/null; then - echo ${UNAME_MACHINE}-univel-sysv${UNAME_REL} - else - echo ${UNAME_MACHINE}-pc-sysv${UNAME_REL} - fi - exit ;; - i*86:*:5:[678]*) - # UnixWare 7.x, OpenUNIX and OpenServer 6. - case `/bin/uname -X | grep "^Machine"` in - *486*) UNAME_MACHINE=i486 ;; - *Pentium) UNAME_MACHINE=i586 ;; - *Pent*|*Celeron) UNAME_MACHINE=i686 ;; - esac - echo ${UNAME_MACHINE}-unknown-sysv${UNAME_RELEASE}${UNAME_SYSTEM}${UNAME_VERSION} - exit ;; - i*86:*:3.2:*) - if test -f /usr/options/cb.name; then - UNAME_REL=`sed -n 's/.*Version //p' </usr/options/cb.name` - echo ${UNAME_MACHINE}-pc-isc$UNAME_REL - elif /bin/uname -X 2>/dev/null >/dev/null ; then - UNAME_REL=`(/bin/uname -X|grep Release|sed -e 's/.*= //')` - (/bin/uname -X|grep i80486 >/dev/null) && UNAME_MACHINE=i486 - (/bin/uname -X|grep '^Machine.*Pentium' >/dev/null) \ - && UNAME_MACHINE=i586 - (/bin/uname -X|grep '^Machine.*Pent *II' >/dev/null) \ - && UNAME_MACHINE=i686 - (/bin/uname -X|grep '^Machine.*Pentium Pro' >/dev/null) \ - && UNAME_MACHINE=i686 - echo ${UNAME_MACHINE}-pc-sco$UNAME_REL - else - echo ${UNAME_MACHINE}-pc-sysv32 - fi - exit ;; - pc:*:*:*) - # Left here for compatibility: - # uname -m prints for DJGPP always 'pc', but it prints nothing about - # the processor, so we play safe by assuming i586. - # Note: whatever this is, it MUST be the same as what config.sub - # prints for the "djgpp" host, or else GDB configury will decide that - # this is a cross-build. - echo i586-pc-msdosdjgpp - exit ;; - Intel:Mach:3*:*) - echo i386-pc-mach3 - exit ;; - paragon:*:*:*) - echo i860-intel-osf1 - exit ;; - i860:*:4.*:*) # i860-SVR4 - if grep Stardent /usr/include/sys/uadmin.h >/dev/null 2>&1 ; then - echo i860-stardent-sysv${UNAME_RELEASE} # Stardent Vistra i860-SVR4 - else # Add other i860-SVR4 vendors below as they are discovered. - echo i860-unknown-sysv${UNAME_RELEASE} # Unknown i860-SVR4 - fi - exit ;; - mini*:CTIX:SYS*5:*) - # "miniframe" - echo m68010-convergent-sysv - exit ;; - mc68k:UNIX:SYSTEM5:3.51m) - echo m68k-convergent-sysv - exit ;; - M680?0:D-NIX:5.3:*) - echo m68k-diab-dnix - exit ;; - M68*:*:R3V[5678]*:*) - test -r /sysV68 && { echo 'm68k-motorola-sysv'; exit; } ;; - 3[345]??:*:4.0:3.0 | 3[34]??A:*:4.0:3.0 | 3[34]??,*:*:4.0:3.0 | 3[34]??/*:*:4.0:3.0 | 4400:*:4.0:3.0 | 4850:*:4.0:3.0 | SKA40:*:4.0:3.0 | SDS2:*:4.0:3.0 | SHG2:*:4.0:3.0 | S7501*:*:4.0:3.0) - OS_REL='' - test -r /etc/.relid \ - && OS_REL=.`sed -n 's/[^ ]* [^ ]* \([0-9][0-9]\).*/\1/p' < /etc/.relid` - /bin/uname -p 2>/dev/null | grep 86 >/dev/null \ - && { echo i486-ncr-sysv4.3${OS_REL}; exit; } - /bin/uname -p 2>/dev/null | /bin/grep entium >/dev/null \ - && { echo i586-ncr-sysv4.3${OS_REL}; exit; } ;; - 3[34]??:*:4.0:* | 3[34]??,*:*:4.0:*) - /bin/uname -p 2>/dev/null | grep 86 >/dev/null \ - && { echo i486-ncr-sysv4; exit; } ;; - NCR*:*:4.2:* | MPRAS*:*:4.2:*) - OS_REL='.3' - test -r /etc/.relid \ - && OS_REL=.`sed -n 's/[^ ]* [^ ]* \([0-9][0-9]\).*/\1/p' < /etc/.relid` - /bin/uname -p 2>/dev/null | grep 86 >/dev/null \ - && { echo i486-ncr-sysv4.3${OS_REL}; exit; } - /bin/uname -p 2>/dev/null | /bin/grep entium >/dev/null \ - && { echo i586-ncr-sysv4.3${OS_REL}; exit; } - /bin/uname -p 2>/dev/null | /bin/grep pteron >/dev/null \ - && { echo i586-ncr-sysv4.3${OS_REL}; exit; } ;; - m68*:LynxOS:2.*:* | m68*:LynxOS:3.0*:*) - echo m68k-unknown-lynxos${UNAME_RELEASE} - exit ;; - mc68030:UNIX_System_V:4.*:*) - echo m68k-atari-sysv4 - exit ;; - TSUNAMI:LynxOS:2.*:*) - echo sparc-unknown-lynxos${UNAME_RELEASE} - exit ;; - rs6000:LynxOS:2.*:*) - echo rs6000-unknown-lynxos${UNAME_RELEASE} - exit ;; - PowerPC:LynxOS:2.*:* | PowerPC:LynxOS:3.[01]*:* | PowerPC:LynxOS:4.0*:*) - echo powerpc-unknown-lynxos${UNAME_RELEASE} - exit ;; - SM[BE]S:UNIX_SV:*:*) - echo mips-dde-sysv${UNAME_RELEASE} - exit ;; - RM*:ReliantUNIX-*:*:*) - echo mips-sni-sysv4 - exit ;; - RM*:SINIX-*:*:*) - echo mips-sni-sysv4 - exit ;; - *:SINIX-*:*:*) - if uname -p 2>/dev/null >/dev/null ; then - UNAME_MACHINE=`(uname -p) 2>/dev/null` - echo ${UNAME_MACHINE}-sni-sysv4 - else - echo ns32k-sni-sysv - fi - exit ;; - PENTIUM:*:4.0*:*) # Unisys `ClearPath HMP IX 4000' SVR4/MP effort - # says <Richard.M.Bartel@ccMail.Census.GOV> - echo i586-unisys-sysv4 - exit ;; - *:UNIX_System_V:4*:FTX*) - # From Gerald Hewes <hewes@openmarket.com>. - # How about differentiating between stratus architectures? -djm - echo hppa1.1-stratus-sysv4 - exit ;; - *:*:*:FTX*) - # From seanf@swdc.stratus.com. - echo i860-stratus-sysv4 - exit ;; - i*86:VOS:*:*) - # From Paul.Green@stratus.com. - echo ${UNAME_MACHINE}-stratus-vos - exit ;; - *:VOS:*:*) - # From Paul.Green@stratus.com. - echo hppa1.1-stratus-vos - exit ;; - mc68*:A/UX:*:*) - echo m68k-apple-aux${UNAME_RELEASE} - exit ;; - news*:NEWS-OS:6*:*) - echo mips-sony-newsos6 - exit ;; - R[34]000:*System_V*:*:* | R4000:UNIX_SYSV:*:* | R*000:UNIX_SV:*:*) - if [ -d /usr/nec ]; then - echo mips-nec-sysv${UNAME_RELEASE} - else - echo mips-unknown-sysv${UNAME_RELEASE} - fi - exit ;; - BeBox:BeOS:*:*) # BeOS running on hardware made by Be, PPC only. - echo powerpc-be-beos - exit ;; - BeMac:BeOS:*:*) # BeOS running on Mac or Mac clone, PPC only. - echo powerpc-apple-beos - exit ;; - BePC:BeOS:*:*) # BeOS running on Intel PC compatible. - echo i586-pc-beos - exit ;; - BePC:Haiku:*:*) # Haiku running on Intel PC compatible. - echo i586-pc-haiku - exit ;; - SX-4:SUPER-UX:*:*) - echo sx4-nec-superux${UNAME_RELEASE} - exit ;; - SX-5:SUPER-UX:*:*) - echo sx5-nec-superux${UNAME_RELEASE} - exit ;; - SX-6:SUPER-UX:*:*) - echo sx6-nec-superux${UNAME_RELEASE} - exit ;; - SX-7:SUPER-UX:*:*) - echo sx7-nec-superux${UNAME_RELEASE} - exit ;; - SX-8:SUPER-UX:*:*) - echo sx8-nec-superux${UNAME_RELEASE} - exit ;; - SX-8R:SUPER-UX:*:*) - echo sx8r-nec-superux${UNAME_RELEASE} - exit ;; - Power*:Rhapsody:*:*) - echo powerpc-apple-rhapsody${UNAME_RELEASE} - exit ;; - *:Rhapsody:*:*) - echo ${UNAME_MACHINE}-apple-rhapsody${UNAME_RELEASE} - exit ;; - *:Darwin:*:*) - UNAME_PROCESSOR=`uname -p` || UNAME_PROCESSOR=unknown - case $UNAME_PROCESSOR in - unknown) UNAME_PROCESSOR=powerpc ;; - esac - echo ${UNAME_PROCESSOR}-apple-darwin${UNAME_RELEASE} - exit ;; - *:procnto*:*:* | *:QNX:[0123456789]*:*) - UNAME_PROCESSOR=`uname -p` - if test "$UNAME_PROCESSOR" = "x86"; then - UNAME_PROCESSOR=i386 - UNAME_MACHINE=pc - fi - echo ${UNAME_PROCESSOR}-${UNAME_MACHINE}-nto-qnx${UNAME_RELEASE} - exit ;; - *:QNX:*:4*) - echo i386-pc-qnx - exit ;; - NSE-?:NONSTOP_KERNEL:*:*) - echo nse-tandem-nsk${UNAME_RELEASE} - exit ;; - NSR-?:NONSTOP_KERNEL:*:*) - echo nsr-tandem-nsk${UNAME_RELEASE} - exit ;; - *:NonStop-UX:*:*) - echo mips-compaq-nonstopux - exit ;; - BS2000:POSIX*:*:*) - echo bs2000-siemens-sysv - exit ;; - DS/*:UNIX_System_V:*:*) - echo ${UNAME_MACHINE}-${UNAME_SYSTEM}-${UNAME_RELEASE} - exit ;; - *:Plan9:*:*) - # "uname -m" is not consistent, so use $cputype instead. 386 - # is converted to i386 for consistency with other x86 - # operating systems. - if test "$cputype" = "386"; then - UNAME_MACHINE=i386 - else - UNAME_MACHINE="$cputype" - fi - echo ${UNAME_MACHINE}-unknown-plan9 - exit ;; - *:TOPS-10:*:*) - echo pdp10-unknown-tops10 - exit ;; - *:TENEX:*:*) - echo pdp10-unknown-tenex - exit ;; - KS10:TOPS-20:*:* | KL10:TOPS-20:*:* | TYPE4:TOPS-20:*:*) - echo pdp10-dec-tops20 - exit ;; - XKL-1:TOPS-20:*:* | TYPE5:TOPS-20:*:*) - echo pdp10-xkl-tops20 - exit ;; - *:TOPS-20:*:*) - echo pdp10-unknown-tops20 - exit ;; - *:ITS:*:*) - echo pdp10-unknown-its - exit ;; - SEI:*:*:SEIUX) - echo mips-sei-seiux${UNAME_RELEASE} - exit ;; - *:DragonFly:*:*) - echo ${UNAME_MACHINE}-unknown-dragonfly`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'` - exit ;; - *:*VMS:*:*) - UNAME_MACHINE=`(uname -p) 2>/dev/null` - case "${UNAME_MACHINE}" in - A*) echo alpha-dec-vms ; exit ;; - I*) echo ia64-dec-vms ; exit ;; - V*) echo vax-dec-vms ; exit ;; - esac ;; - *:XENIX:*:SysV) - echo i386-pc-xenix - exit ;; - i*86:skyos:*:*) - echo ${UNAME_MACHINE}-pc-skyos`echo ${UNAME_RELEASE}` | sed -e 's/ .*$//' - exit ;; - i*86:rdos:*:*) - echo ${UNAME_MACHINE}-pc-rdos - exit ;; - i*86:AROS:*:*) - echo ${UNAME_MACHINE}-pc-aros - exit ;; -esac - -#echo '(No uname command or uname output not recognized.)' 1>&2 -#echo "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" 1>&2 - -eval $set_cc_for_build -cat >$dummy.c <<EOF -#ifdef _SEQUENT_ -# include <sys/types.h> -# include <sys/utsname.h> -#endif -main () -{ -#if defined (sony) -#if defined (MIPSEB) - /* BFD wants "bsd" instead of "newsos". Perhaps BFD should be changed, - I don't know.... */ - printf ("mips-sony-bsd\n"); exit (0); -#else -#include <sys/param.h> - printf ("m68k-sony-newsos%s\n", -#ifdef NEWSOS4 - "4" -#else - "" -#endif - ); exit (0); -#endif -#endif - -#if defined (__arm) && defined (__acorn) && defined (__unix) - printf ("arm-acorn-riscix\n"); exit (0); -#endif - -#if defined (hp300) && !defined (hpux) - printf ("m68k-hp-bsd\n"); exit (0); -#endif - -#if defined (NeXT) -#if !defined (__ARCHITECTURE__) -#define __ARCHITECTURE__ "m68k" -#endif - int version; - version=`(hostinfo | sed -n 's/.*NeXT Mach \([0-9]*\).*/\1/p') 2>/dev/null`; - if (version < 4) - printf ("%s-next-nextstep%d\n", __ARCHITECTURE__, version); - else - printf ("%s-next-openstep%d\n", __ARCHITECTURE__, version); - exit (0); -#endif - -#if defined (MULTIMAX) || defined (n16) -#if defined (UMAXV) - printf ("ns32k-encore-sysv\n"); exit (0); -#else -#if defined (CMU) - printf ("ns32k-encore-mach\n"); exit (0); -#else - printf ("ns32k-encore-bsd\n"); exit (0); -#endif -#endif -#endif - -#if defined (__386BSD__) - printf ("i386-pc-bsd\n"); exit (0); -#endif - -#if defined (sequent) -#if defined (i386) - printf ("i386-sequent-dynix\n"); exit (0); -#endif -#if defined (ns32000) - printf ("ns32k-sequent-dynix\n"); exit (0); -#endif -#endif - -#if defined (_SEQUENT_) - struct utsname un; - - uname(&un); - - if (strncmp(un.version, "V2", 2) == 0) { - printf ("i386-sequent-ptx2\n"); exit (0); - } - if (strncmp(un.version, "V1", 2) == 0) { /* XXX is V1 correct? */ - printf ("i386-sequent-ptx1\n"); exit (0); - } - printf ("i386-sequent-ptx\n"); exit (0); - -#endif - -#if defined (vax) -# if !defined (ultrix) -# include <sys/param.h> -# if defined (BSD) -# if BSD == 43 - printf ("vax-dec-bsd4.3\n"); exit (0); -# else -# if BSD == 199006 - printf ("vax-dec-bsd4.3reno\n"); exit (0); -# else - printf ("vax-dec-bsd\n"); exit (0); -# endif -# endif -# else - printf ("vax-dec-bsd\n"); exit (0); -# endif -# else - printf ("vax-dec-ultrix\n"); exit (0); -# endif -#endif - -#if defined (alliant) && defined (i860) - printf ("i860-alliant-bsd\n"); exit (0); -#endif - - exit (1); -} -EOF - -$CC_FOR_BUILD -o $dummy $dummy.c 2>/dev/null && SYSTEM_NAME=`$dummy` && - { echo "$SYSTEM_NAME"; exit; } - -# Apollos put the system type in the environment. - -test -d /usr/apollo && { echo ${ISP}-apollo-${SYSTYPE}; exit; } - -# Convex versions that predate uname can use getsysinfo(1) - -if [ -x /usr/convex/getsysinfo ] -then - case `getsysinfo -f cpu_type` in - c1*) - echo c1-convex-bsd - exit ;; - c2*) - if getsysinfo -f scalar_acc - then echo c32-convex-bsd - else echo c2-convex-bsd - fi - exit ;; - c34*) - echo c34-convex-bsd - exit ;; - c38*) - echo c38-convex-bsd - exit ;; - c4*) - echo c4-convex-bsd - exit ;; - esac -fi - -cat >&2 <<EOF -$0: unable to guess system type - -This script, last modified $timestamp, has failed to recognize -the operating system you are using. It is advised that you -download the most up to date version of the config scripts from - - http://git.savannah.gnu.org/gitweb/?p=config.git;a=blob_plain;f=config.guess;hb=HEAD -and - http://git.savannah.gnu.org/gitweb/?p=config.git;a=blob_plain;f=config.sub;hb=HEAD - -If the version you run ($0) is already up to date, please -send the following data and any information you think might be -pertinent to <config-patches@gnu.org> in order to provide the needed -information to handle your system. - -config.guess timestamp = $timestamp - -uname -m = `(uname -m) 2>/dev/null || echo unknown` -uname -r = `(uname -r) 2>/dev/null || echo unknown` -uname -s = `(uname -s) 2>/dev/null || echo unknown` -uname -v = `(uname -v) 2>/dev/null || echo unknown` - -/usr/bin/uname -p = `(/usr/bin/uname -p) 2>/dev/null` -/bin/uname -X = `(/bin/uname -X) 2>/dev/null` - -hostinfo = `(hostinfo) 2>/dev/null` -/bin/universe = `(/bin/universe) 2>/dev/null` -/usr/bin/arch -k = `(/usr/bin/arch -k) 2>/dev/null` -/bin/arch = `(/bin/arch) 2>/dev/null` -/usr/bin/oslevel = `(/usr/bin/oslevel) 2>/dev/null` -/usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null` - -UNAME_MACHINE = ${UNAME_MACHINE} -UNAME_RELEASE = ${UNAME_RELEASE} -UNAME_SYSTEM = ${UNAME_SYSTEM} -UNAME_VERSION = ${UNAME_VERSION} -EOF - -exit 1 - -# Local variables: -# eval: (add-hook 'write-file-hooks 'time-stamp) -# time-stamp-start: "timestamp='" -# time-stamp-format: "%:y-%02m-%02d" -# time-stamp-end: "'" -# End: diff --git a/pixman/config.h.in b/pixman/config.h.in deleted file mode 100644 index de9052dbf..000000000 --- a/pixman/config.h.in +++ /dev/null @@ -1,119 +0,0 @@ -/* config.h.in. Generated from configure.ac by autoheader. */ - -/* Define if building universal (internal helper macro) */ -#undef AC_APPLE_UNIVERSAL_BUILD - -/* Define to 1 if you have the <dlfcn.h> header file. */ -#undef HAVE_DLFCN_H - -/* Define to 1 if you have the `getisax' function. */ -#undef HAVE_GETISAX - -/* Define to 1 if you have the <inttypes.h> header file. */ -#undef HAVE_INTTYPES_H - -/* Define to 1 if you have the <memory.h> header file. */ -#undef HAVE_MEMORY_H - -/* Whether we have posix_memalign() */ -#undef HAVE_POSIX_MEMALIGN - -/* Whether pthread_setspecific() is supported */ -#undef HAVE_PTHREAD_SETSPECIFIC - -/* Define to 1 if you have the <stdint.h> header file. */ -#undef HAVE_STDINT_H - -/* Define to 1 if you have the <stdlib.h> header file. */ -#undef HAVE_STDLIB_H - -/* Define to 1 if you have the <strings.h> header file. */ -#undef HAVE_STRINGS_H - -/* Define to 1 if you have the <string.h> header file. */ -#undef HAVE_STRING_H - -/* Define to 1 if you have the <sys/stat.h> header file. */ -#undef HAVE_SYS_STAT_H - -/* Define to 1 if you have the <sys/types.h> header file. */ -#undef HAVE_SYS_TYPES_H - -/* Define to 1 if you have the <unistd.h> header file. */ -#undef HAVE_UNISTD_H - -/* Define to the sub-directory in which libtool stores uninstalled libraries. - */ -#undef LT_OBJDIR - -/* Name of package */ -#undef PACKAGE - -/* Define to the address where bug reports for this package should be sent. */ -#undef PACKAGE_BUGREPORT - -/* Define to the full name of this package. */ -#undef PACKAGE_NAME - -/* Define to the full name and version of this package. */ -#undef PACKAGE_STRING - -/* Define to the one symbol short name of this package. */ -#undef PACKAGE_TARNAME - -/* Define to the home page for this package. */ -#undef PACKAGE_URL - -/* Define to the version of this package. */ -#undef PACKAGE_VERSION - -/* enable TIMER_BEGIN/TIMER_END macros */ -#undef PIXMAN_TIMERS - -/* The size of `long', as computed by sizeof. */ -#undef SIZEOF_LONG - -/* Define to 1 if you have the ANSI C header files. */ -#undef STDC_HEADERS - -/* Whether the tool chain supports __thread */ -#undef TOOLCHAIN_SUPPORTS__THREAD - -/* use ARM NEON assembly optimizations */ -#undef USE_ARM_NEON - -/* use ARM SIMD assembly optimizations */ -#undef USE_ARM_SIMD - -/* use GNU-style inline assembler */ -#undef USE_GCC_INLINE_ASM - -/* use MMX compiler intrinsics */ -#undef USE_MMX - -/* use SSE2 compiler intrinsics */ -#undef USE_SSE2 - -/* use VMX compiler intrinsics */ -#undef USE_VMX - -/* Version number of package */ -#undef VERSION - -/* Define WORDS_BIGENDIAN to 1 if your processor stores words with the most - significant byte first (like Motorola and SPARC, unlike Intel). */ -#if defined AC_APPLE_UNIVERSAL_BUILD -# if defined __BIG_ENDIAN__ -# define WORDS_BIGENDIAN 1 -# endif -#else -# ifndef WORDS_BIGENDIAN -# undef WORDS_BIGENDIAN -# endif -#endif - -/* Define to `__inline__' or `__inline' if that's what the C compiler - calls it, or to nothing if 'inline' is not supported under any name. */ -#ifndef __cplusplus -#undef inline -#endif diff --git a/pixman/config.sub b/pixman/config.sub deleted file mode 100644 index a39437d01..000000000 --- a/pixman/config.sub +++ /dev/null @@ -1,1686 +0,0 @@ -#! /bin/sh -# Configuration validation subroutine script. -# Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, -# 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008 -# Free Software Foundation, Inc. - -timestamp='2009-04-17' - -# This file is (in principle) common to ALL GNU software. -# The presence of a machine in this file suggests that SOME GNU software -# can handle that machine. It does not imply ALL GNU software can. -# -# This file is free software; you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation; either version 2 of the License, or -# (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 51 Franklin Street - Fifth Floor, Boston, MA -# 02110-1301, USA. -# -# As a special exception to the GNU General Public License, if you -# distribute this file as part of a program that contains a -# configuration script generated by Autoconf, you may include it under -# the same distribution terms that you use for the rest of that program. - - -# Please send patches to <config-patches@gnu.org>. Submit a context -# diff and a properly formatted ChangeLog entry. -# -# Configuration subroutine to validate and canonicalize a configuration type. -# Supply the specified configuration type as an argument. -# If it is invalid, we print an error message on stderr and exit with code 1. -# Otherwise, we print the canonical config type on stdout and succeed. - -# This file is supposed to be the same for all GNU packages -# and recognize all the CPU types, system types and aliases -# that are meaningful with *any* GNU software. -# Each package is responsible for reporting which valid configurations -# it does not support. The user should be able to distinguish -# a failure to support a valid configuration from a meaningless -# configuration. - -# The goal of this file is to map all the various variations of a given -# machine specification into a single specification in the form: -# CPU_TYPE-MANUFACTURER-OPERATING_SYSTEM -# or in some cases, the newer four-part form: -# CPU_TYPE-MANUFACTURER-KERNEL-OPERATING_SYSTEM -# It is wrong to echo any other type of specification. - -me=`echo "$0" | sed -e 's,.*/,,'` - -usage="\ -Usage: $0 [OPTION] CPU-MFR-OPSYS - $0 [OPTION] ALIAS - -Canonicalize a configuration name. - -Operation modes: - -h, --help print this help, then exit - -t, --time-stamp print date of last modification, then exit - -v, --version print version number, then exit - -Report bugs and patches to <config-patches@gnu.org>." - -version="\ -GNU config.sub ($timestamp) - -Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, -2002, 2003, 2004, 2005, 2006, 2007, 2008 Free Software Foundation, Inc. - -This is free software; see the source for copying conditions. There is NO -warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE." - -help=" -Try \`$me --help' for more information." - -# Parse command line -while test $# -gt 0 ; do - case $1 in - --time-stamp | --time* | -t ) - echo "$timestamp" ; exit ;; - --version | -v ) - echo "$version" ; exit ;; - --help | --h* | -h ) - echo "$usage"; exit ;; - -- ) # Stop option processing - shift; break ;; - - ) # Use stdin as input. - break ;; - -* ) - echo "$me: invalid option $1$help" - exit 1 ;; - - *local*) - # First pass through any local machine types. - echo $1 - exit ;; - - * ) - break ;; - esac -done - -case $# in - 0) echo "$me: missing argument$help" >&2 - exit 1;; - 1) ;; - *) echo "$me: too many arguments$help" >&2 - exit 1;; -esac - -# Separate what the user gave into CPU-COMPANY and OS or KERNEL-OS (if any). -# Here we must recognize all the valid KERNEL-OS combinations. -maybe_os=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\2/'` -case $maybe_os in - nto-qnx* | linux-gnu* | linux-dietlibc | linux-newlib* | linux-uclibc* | \ - uclinux-uclibc* | uclinux-gnu* | kfreebsd*-gnu* | knetbsd*-gnu* | netbsd*-gnu* | \ - kopensolaris*-gnu* | \ - storm-chaos* | os2-emx* | rtmk-nova*) - os=-$maybe_os - basic_machine=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\1/'` - ;; - *) - basic_machine=`echo $1 | sed 's/-[^-]*$//'` - if [ $basic_machine != $1 ] - then os=`echo $1 | sed 's/.*-/-/'` - else os=; fi - ;; -esac - -### Let's recognize common machines as not being operating systems so -### that things like config.sub decstation-3100 work. We also -### recognize some manufacturers as not being operating systems, so we -### can provide default operating systems below. -case $os in - -sun*os*) - # Prevent following clause from handling this invalid input. - ;; - -dec* | -mips* | -sequent* | -encore* | -pc532* | -sgi* | -sony* | \ - -att* | -7300* | -3300* | -delta* | -motorola* | -sun[234]* | \ - -unicom* | -ibm* | -next | -hp | -isi* | -apollo | -altos* | \ - -convergent* | -ncr* | -news | -32* | -3600* | -3100* | -hitachi* |\ - -c[123]* | -convex* | -sun | -crds | -omron* | -dg | -ultra | -tti* | \ - -harris | -dolphin | -highlevel | -gould | -cbm | -ns | -masscomp | \ - -apple | -axis | -knuth | -cray) - os= - basic_machine=$1 - ;; - -sim | -cisco | -oki | -wec | -winbond) - os= - basic_machine=$1 - ;; - -scout) - ;; - -wrs) - os=-vxworks - basic_machine=$1 - ;; - -chorusos*) - os=-chorusos - basic_machine=$1 - ;; - -chorusrdb) - os=-chorusrdb - basic_machine=$1 - ;; - -hiux*) - os=-hiuxwe2 - ;; - -sco6) - os=-sco5v6 - basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` - ;; - -sco5) - os=-sco3.2v5 - basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` - ;; - -sco4) - os=-sco3.2v4 - basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` - ;; - -sco3.2.[4-9]*) - os=`echo $os | sed -e 's/sco3.2./sco3.2v/'` - basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` - ;; - -sco3.2v[4-9]*) - # Don't forget version if it is 3.2v4 or newer. - basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` - ;; - -sco5v6*) - # Don't forget version if it is 3.2v4 or newer. - basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` - ;; - -sco*) - os=-sco3.2v2 - basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` - ;; - -udk*) - basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` - ;; - -isc) - os=-isc2.2 - basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` - ;; - -clix*) - basic_machine=clipper-intergraph - ;; - -isc*) - basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` - ;; - -lynx*) - os=-lynxos - ;; - -ptx*) - basic_machine=`echo $1 | sed -e 's/86-.*/86-sequent/'` - ;; - -windowsnt*) - os=`echo $os | sed -e 's/windowsnt/winnt/'` - ;; - -psos*) - os=-psos - ;; - -mint | -mint[0-9]*) - basic_machine=m68k-atari - os=-mint - ;; -esac - -# Decode aliases for certain CPU-COMPANY combinations. -case $basic_machine in - # Recognize the basic CPU types without company name. - # Some are omitted here because they have special meanings below. - 1750a | 580 \ - | a29k \ - | alpha | alphaev[4-8] | alphaev56 | alphaev6[78] | alphapca5[67] \ - | alpha64 | alpha64ev[4-8] | alpha64ev56 | alpha64ev6[78] | alpha64pca5[67] \ - | am33_2.0 \ - | arc | arm | arm[bl]e | arme[lb] | armv[2345] | armv[345][lb] | avr | avr32 \ - | bfin \ - | c4x | clipper \ - | d10v | d30v | dlx | dsp16xx \ - | fido | fr30 | frv \ - | h8300 | h8500 | hppa | hppa1.[01] | hppa2.0 | hppa2.0[nw] | hppa64 \ - | i370 | i860 | i960 | ia64 \ - | ip2k | iq2000 \ - | lm32 \ - | m32c | m32r | m32rle | m68000 | m68k | m88k \ - | maxq | mb | microblaze | mcore | mep | metag \ - | mips | mipsbe | mipseb | mipsel | mipsle \ - | mips16 \ - | mips64 | mips64el \ - | mips64octeon | mips64octeonel \ - | mips64orion | mips64orionel \ - | mips64r5900 | mips64r5900el \ - | mips64vr | mips64vrel \ - | mips64vr4100 | mips64vr4100el \ - | mips64vr4300 | mips64vr4300el \ - | mips64vr5000 | mips64vr5000el \ - | mips64vr5900 | mips64vr5900el \ - | mipsisa32 | mipsisa32el \ - | mipsisa32r2 | mipsisa32r2el \ - | mipsisa64 | mipsisa64el \ - | mipsisa64r2 | mipsisa64r2el \ - | mipsisa64sb1 | mipsisa64sb1el \ - | mipsisa64sr71k | mipsisa64sr71kel \ - | mipstx39 | mipstx39el \ - | mn10200 | mn10300 \ - | moxie \ - | mt \ - | msp430 \ - | nios | nios2 \ - | ns16k | ns32k \ - | or32 \ - | pdp10 | pdp11 | pj | pjl \ - | powerpc | powerpc64 | powerpc64le | powerpcle | ppcbe \ - | pyramid \ - | score \ - | sh | sh[1234] | sh[24]a | sh[24]aeb | sh[23]e | sh[34]eb | sheb | shbe | shle | sh[1234]le | sh3ele \ - | sh64 | sh64le \ - | sparc | sparc64 | sparc64b | sparc64v | sparc86x | sparclet | sparclite \ - | sparcv8 | sparcv9 | sparcv9b | sparcv9v \ - | spu | strongarm \ - | tahoe | thumb | tic4x | tic80 | tron \ - | v850 | v850e \ - | we32k \ - | x86 | xc16x | xscale | xscalee[bl] | xstormy16 | xtensa \ - | z8k | z80) - basic_machine=$basic_machine-unknown - ;; - m6811 | m68hc11 | m6812 | m68hc12) - # Motorola 68HC11/12. - basic_machine=$basic_machine-unknown - os=-none - ;; - m88110 | m680[12346]0 | m683?2 | m68360 | m5200 | v70 | w65 | z8k) - ;; - ms1) - basic_machine=mt-unknown - ;; - - # We use `pc' rather than `unknown' - # because (1) that's what they normally are, and - # (2) the word "unknown" tends to confuse beginning users. - i*86 | x86_64) - basic_machine=$basic_machine-pc - ;; - # Object if more than one company name word. - *-*-*) - echo Invalid configuration \`$1\': machine \`$basic_machine\' not recognized 1>&2 - exit 1 - ;; - # Recognize the basic CPU types with company name. - 580-* \ - | a29k-* \ - | alpha-* | alphaev[4-8]-* | alphaev56-* | alphaev6[78]-* \ - | alpha64-* | alpha64ev[4-8]-* | alpha64ev56-* | alpha64ev6[78]-* \ - | alphapca5[67]-* | alpha64pca5[67]-* | arc-* \ - | arm-* | armbe-* | armle-* | armeb-* | armv*-* \ - | avr-* | avr32-* \ - | bfin-* | bs2000-* \ - | c[123]* | c30-* | [cjt]90-* | c4x-* | c54x-* | c55x-* | c6x-* \ - | clipper-* | craynv-* | cydra-* \ - | d10v-* | d30v-* | dlx-* \ - | elxsi-* \ - | f30[01]-* | f700-* | fido-* | fr30-* | frv-* | fx80-* \ - | h8300-* | h8500-* \ - | hppa-* | hppa1.[01]-* | hppa2.0-* | hppa2.0[nw]-* | hppa64-* \ - | i*86-* | i860-* | i960-* | ia64-* \ - | ip2k-* | iq2000-* \ - | lm32-* \ - | m32c-* | m32r-* | m32rle-* \ - | m68000-* | m680[012346]0-* | m68360-* | m683?2-* | m68k-* \ - | m88110-* | m88k-* | maxq-* | mcore-* | metag-* \ - | mips-* | mipsbe-* | mipseb-* | mipsel-* | mipsle-* \ - | mips16-* \ - | mips64-* | mips64el-* \ - | mips64octeon-* | mips64octeonel-* \ - | mips64orion-* | mips64orionel-* \ - | mips64r5900-* | mips64r5900el-* \ - | mips64vr-* | mips64vrel-* \ - | mips64vr4100-* | mips64vr4100el-* \ - | mips64vr4300-* | mips64vr4300el-* \ - | mips64vr5000-* | mips64vr5000el-* \ - | mips64vr5900-* | mips64vr5900el-* \ - | mipsisa32-* | mipsisa32el-* \ - | mipsisa32r2-* | mipsisa32r2el-* \ - | mipsisa64-* | mipsisa64el-* \ - | mipsisa64r2-* | mipsisa64r2el-* \ - | mipsisa64sb1-* | mipsisa64sb1el-* \ - | mipsisa64sr71k-* | mipsisa64sr71kel-* \ - | mipstx39-* | mipstx39el-* \ - | mmix-* \ - | mt-* \ - | msp430-* \ - | nios-* | nios2-* \ - | none-* | np1-* | ns16k-* | ns32k-* \ - | orion-* \ - | pdp10-* | pdp11-* | pj-* | pjl-* | pn-* | power-* \ - | powerpc-* | powerpc64-* | powerpc64le-* | powerpcle-* | ppcbe-* \ - | pyramid-* \ - | romp-* | rs6000-* \ - | sh-* | sh[1234]-* | sh[24]a-* | sh[24]aeb-* | sh[23]e-* | sh[34]eb-* | sheb-* | shbe-* \ - | shle-* | sh[1234]le-* | sh3ele-* | sh64-* | sh64le-* \ - | sparc-* | sparc64-* | sparc64b-* | sparc64v-* | sparc86x-* | sparclet-* \ - | sparclite-* \ - | sparcv8-* | sparcv9-* | sparcv9b-* | sparcv9v-* | strongarm-* | sv1-* | sx?-* \ - | tahoe-* | thumb-* \ - | tic30-* | tic4x-* | tic54x-* | tic55x-* | tic6x-* | tic80-* | tile-* \ - | tron-* \ - | v850-* | v850e-* | vax-* \ - | we32k-* \ - | x86-* | x86_64-* | xc16x-* | xps100-* | xscale-* | xscalee[bl]-* \ - | xstormy16-* | xtensa*-* \ - | ymp-* \ - | z8k-* | z80-*) - ;; - # Recognize the basic CPU types without company name, with glob match. - xtensa*) - basic_machine=$basic_machine-unknown - ;; - # Recognize the various machine names and aliases which stand - # for a CPU type and a company and sometimes even an OS. - 386bsd) - basic_machine=i386-unknown - os=-bsd - ;; - 3b1 | 7300 | 7300-att | att-7300 | pc7300 | safari | unixpc) - basic_machine=m68000-att - ;; - 3b*) - basic_machine=we32k-att - ;; - a29khif) - basic_machine=a29k-amd - os=-udi - ;; - abacus) - basic_machine=abacus-unknown - ;; - adobe68k) - basic_machine=m68010-adobe - os=-scout - ;; - alliant | fx80) - basic_machine=fx80-alliant - ;; - altos | altos3068) - basic_machine=m68k-altos - ;; - am29k) - basic_machine=a29k-none - os=-bsd - ;; - amd64) - basic_machine=x86_64-pc - ;; - amd64-*) - basic_machine=x86_64-`echo $basic_machine | sed 's/^[^-]*-//'` - ;; - amdahl) - basic_machine=580-amdahl - os=-sysv - ;; - amiga | amiga-*) - basic_machine=m68k-unknown - ;; - amigaos | amigados) - basic_machine=m68k-unknown - os=-amigaos - ;; - amigaunix | amix) - basic_machine=m68k-unknown - os=-sysv4 - ;; - apollo68) - basic_machine=m68k-apollo - os=-sysv - ;; - apollo68bsd) - basic_machine=m68k-apollo - os=-bsd - ;; - aros) - basic_machine=i386-pc - os=-aros - ;; - aux) - basic_machine=m68k-apple - os=-aux - ;; - balance) - basic_machine=ns32k-sequent - os=-dynix - ;; - blackfin) - basic_machine=bfin-unknown - os=-linux - ;; - blackfin-*) - basic_machine=bfin-`echo $basic_machine | sed 's/^[^-]*-//'` - os=-linux - ;; - c90) - basic_machine=c90-cray - os=-unicos - ;; - cegcc) - basic_machine=arm-unknown - os=-cegcc - ;; - convex-c1) - basic_machine=c1-convex - os=-bsd - ;; - convex-c2) - basic_machine=c2-convex - os=-bsd - ;; - convex-c32) - basic_machine=c32-convex - os=-bsd - ;; - convex-c34) - basic_machine=c34-convex - os=-bsd - ;; - convex-c38) - basic_machine=c38-convex - os=-bsd - ;; - cray | j90) - basic_machine=j90-cray - os=-unicos - ;; - craynv) - basic_machine=craynv-cray - os=-unicosmp - ;; - cr16) - basic_machine=cr16-unknown - os=-elf - ;; - crds | unos) - basic_machine=m68k-crds - ;; - crisv32 | crisv32-* | etraxfs*) - basic_machine=crisv32-axis - ;; - cris | cris-* | etrax*) - basic_machine=cris-axis - ;; - crx) - basic_machine=crx-unknown - os=-elf - ;; - da30 | da30-*) - basic_machine=m68k-da30 - ;; - decstation | decstation-3100 | pmax | pmax-* | pmin | dec3100 | decstatn) - basic_machine=mips-dec - ;; - decsystem10* | dec10*) - basic_machine=pdp10-dec - os=-tops10 - ;; - decsystem20* | dec20*) - basic_machine=pdp10-dec - os=-tops20 - ;; - delta | 3300 | motorola-3300 | motorola-delta \ - | 3300-motorola | delta-motorola) - basic_machine=m68k-motorola - ;; - delta88) - basic_machine=m88k-motorola - os=-sysv3 - ;; - dicos) - basic_machine=i686-pc - os=-dicos - ;; - djgpp) - basic_machine=i586-pc - os=-msdosdjgpp - ;; - dpx20 | dpx20-*) - basic_machine=rs6000-bull - os=-bosx - ;; - dpx2* | dpx2*-bull) - basic_machine=m68k-bull - os=-sysv3 - ;; - ebmon29k) - basic_machine=a29k-amd - os=-ebmon - ;; - elxsi) - basic_machine=elxsi-elxsi - os=-bsd - ;; - encore | umax | mmax) - basic_machine=ns32k-encore - ;; - es1800 | OSE68k | ose68k | ose | OSE) - basic_machine=m68k-ericsson - os=-ose - ;; - fx2800) - basic_machine=i860-alliant - ;; - genix) - basic_machine=ns32k-ns - ;; - gmicro) - basic_machine=tron-gmicro - os=-sysv - ;; - go32) - basic_machine=i386-pc - os=-go32 - ;; - h3050r* | hiux*) - basic_machine=hppa1.1-hitachi - os=-hiuxwe2 - ;; - h8300hms) - basic_machine=h8300-hitachi - os=-hms - ;; - h8300xray) - basic_machine=h8300-hitachi - os=-xray - ;; - h8500hms) - basic_machine=h8500-hitachi - os=-hms - ;; - harris) - basic_machine=m88k-harris - os=-sysv3 - ;; - hp300-*) - basic_machine=m68k-hp - ;; - hp300bsd) - basic_machine=m68k-hp - os=-bsd - ;; - hp300hpux) - basic_machine=m68k-hp - os=-hpux - ;; - hp3k9[0-9][0-9] | hp9[0-9][0-9]) - basic_machine=hppa1.0-hp - ;; - hp9k2[0-9][0-9] | hp9k31[0-9]) - basic_machine=m68000-hp - ;; - hp9k3[2-9][0-9]) - basic_machine=m68k-hp - ;; - hp9k6[0-9][0-9] | hp6[0-9][0-9]) - basic_machine=hppa1.0-hp - ;; - hp9k7[0-79][0-9] | hp7[0-79][0-9]) - basic_machine=hppa1.1-hp - ;; - hp9k78[0-9] | hp78[0-9]) - # FIXME: really hppa2.0-hp - basic_machine=hppa1.1-hp - ;; - hp9k8[67]1 | hp8[67]1 | hp9k80[24] | hp80[24] | hp9k8[78]9 | hp8[78]9 | hp9k893 | hp893) - # FIXME: really hppa2.0-hp - basic_machine=hppa1.1-hp - ;; - hp9k8[0-9][13679] | hp8[0-9][13679]) - basic_machine=hppa1.1-hp - ;; - hp9k8[0-9][0-9] | hp8[0-9][0-9]) - basic_machine=hppa1.0-hp - ;; - hppa-next) - os=-nextstep3 - ;; - hppaosf) - basic_machine=hppa1.1-hp - os=-osf - ;; - hppro) - basic_machine=hppa1.1-hp - os=-proelf - ;; - i370-ibm* | ibm*) - basic_machine=i370-ibm - ;; -# I'm not sure what "Sysv32" means. Should this be sysv3.2? - i*86v32) - basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'` - os=-sysv32 - ;; - i*86v4*) - basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'` - os=-sysv4 - ;; - i*86v) - basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'` - os=-sysv - ;; - i*86sol2) - basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'` - os=-solaris2 - ;; - i386mach) - basic_machine=i386-mach - os=-mach - ;; - i386-vsta | vsta) - basic_machine=i386-unknown - os=-vsta - ;; - iris | iris4d) - basic_machine=mips-sgi - case $os in - -irix*) - ;; - *) - os=-irix4 - ;; - esac - ;; - isi68 | isi) - basic_machine=m68k-isi - os=-sysv - ;; - m68knommu) - basic_machine=m68k-unknown - os=-linux - ;; - m68knommu-*) - basic_machine=m68k-`echo $basic_machine | sed 's/^[^-]*-//'` - os=-linux - ;; - m88k-omron*) - basic_machine=m88k-omron - ;; - magnum | m3230) - basic_machine=mips-mips - os=-sysv - ;; - merlin) - basic_machine=ns32k-utek - os=-sysv - ;; - mingw32) - basic_machine=i386-pc - os=-mingw32 - ;; - mingw32ce) - basic_machine=arm-unknown - os=-mingw32ce - ;; - miniframe) - basic_machine=m68000-convergent - ;; - *mint | -mint[0-9]* | *MiNT | *MiNT[0-9]*) - basic_machine=m68k-atari - os=-mint - ;; - mips3*-*) - basic_machine=`echo $basic_machine | sed -e 's/mips3/mips64/'` - ;; - mips3*) - basic_machine=`echo $basic_machine | sed -e 's/mips3/mips64/'`-unknown - ;; - monitor) - basic_machine=m68k-rom68k - os=-coff - ;; - morphos) - basic_machine=powerpc-unknown - os=-morphos - ;; - msdos) - basic_machine=i386-pc - os=-msdos - ;; - ms1-*) - basic_machine=`echo $basic_machine | sed -e 's/ms1-/mt-/'` - ;; - mvs) - basic_machine=i370-ibm - os=-mvs - ;; - ncr3000) - basic_machine=i486-ncr - os=-sysv4 - ;; - netbsd386) - basic_machine=i386-unknown - os=-netbsd - ;; - netwinder) - basic_machine=armv4l-rebel - os=-linux - ;; - news | news700 | news800 | news900) - basic_machine=m68k-sony - os=-newsos - ;; - news1000) - basic_machine=m68030-sony - os=-newsos - ;; - news-3600 | risc-news) - basic_machine=mips-sony - os=-newsos - ;; - necv70) - basic_machine=v70-nec - os=-sysv - ;; - next | m*-next ) - basic_machine=m68k-next - case $os in - -nextstep* ) - ;; - -ns2*) - os=-nextstep2 - ;; - *) - os=-nextstep3 - ;; - esac - ;; - nh3000) - basic_machine=m68k-harris - os=-cxux - ;; - nh[45]000) - basic_machine=m88k-harris - os=-cxux - ;; - nindy960) - basic_machine=i960-intel - os=-nindy - ;; - mon960) - basic_machine=i960-intel - os=-mon960 - ;; - nonstopux) - basic_machine=mips-compaq - os=-nonstopux - ;; - np1) - basic_machine=np1-gould - ;; - nsr-tandem) - basic_machine=nsr-tandem - ;; - op50n-* | op60c-*) - basic_machine=hppa1.1-oki - os=-proelf - ;; - openrisc | openrisc-*) - basic_machine=or32-unknown - ;; - os400) - basic_machine=powerpc-ibm - os=-os400 - ;; - OSE68000 | ose68000) - basic_machine=m68000-ericsson - os=-ose - ;; - os68k) - basic_machine=m68k-none - os=-os68k - ;; - pa-hitachi) - basic_machine=hppa1.1-hitachi - os=-hiuxwe2 - ;; - paragon) - basic_machine=i860-intel - os=-osf - ;; - parisc) - basic_machine=hppa-unknown - os=-linux - ;; - parisc-*) - basic_machine=hppa-`echo $basic_machine | sed 's/^[^-]*-//'` - os=-linux - ;; - pbd) - basic_machine=sparc-tti - ;; - pbb) - basic_machine=m68k-tti - ;; - pc532 | pc532-*) - basic_machine=ns32k-pc532 - ;; - pc98) - basic_machine=i386-pc - ;; - pc98-*) - basic_machine=i386-`echo $basic_machine | sed 's/^[^-]*-//'` - ;; - pentium | p5 | k5 | k6 | nexgen | viac3) - basic_machine=i586-pc - ;; - pentiumpro | p6 | 6x86 | athlon | athlon_*) - basic_machine=i686-pc - ;; - pentiumii | pentium2 | pentiumiii | pentium3) - basic_machine=i686-pc - ;; - pentium4) - basic_machine=i786-pc - ;; - pentium-* | p5-* | k5-* | k6-* | nexgen-* | viac3-*) - basic_machine=i586-`echo $basic_machine | sed 's/^[^-]*-//'` - ;; - pentiumpro-* | p6-* | 6x86-* | athlon-*) - basic_machine=i686-`echo $basic_machine | sed 's/^[^-]*-//'` - ;; - pentiumii-* | pentium2-* | pentiumiii-* | pentium3-*) - basic_machine=i686-`echo $basic_machine | sed 's/^[^-]*-//'` - ;; - pentium4-*) - basic_machine=i786-`echo $basic_machine | sed 's/^[^-]*-//'` - ;; - pn) - basic_machine=pn-gould - ;; - power) basic_machine=power-ibm - ;; - ppc) basic_machine=powerpc-unknown - ;; - ppc-*) basic_machine=powerpc-`echo $basic_machine | sed 's/^[^-]*-//'` - ;; - ppcle | powerpclittle | ppc-le | powerpc-little) - basic_machine=powerpcle-unknown - ;; - ppcle-* | powerpclittle-*) - basic_machine=powerpcle-`echo $basic_machine | sed 's/^[^-]*-//'` - ;; - ppc64) basic_machine=powerpc64-unknown - ;; - ppc64-*) basic_machine=powerpc64-`echo $basic_machine | sed 's/^[^-]*-//'` - ;; - ppc64le | powerpc64little | ppc64-le | powerpc64-little) - basic_machine=powerpc64le-unknown - ;; - ppc64le-* | powerpc64little-*) - basic_machine=powerpc64le-`echo $basic_machine | sed 's/^[^-]*-//'` - ;; - ps2) - basic_machine=i386-ibm - ;; - pw32) - basic_machine=i586-unknown - os=-pw32 - ;; - rdos) - basic_machine=i386-pc - os=-rdos - ;; - rom68k) - basic_machine=m68k-rom68k - os=-coff - ;; - rm[46]00) - basic_machine=mips-siemens - ;; - rtpc | rtpc-*) - basic_machine=romp-ibm - ;; - s390 | s390-*) - basic_machine=s390-ibm - ;; - s390x | s390x-*) - basic_machine=s390x-ibm - ;; - sa29200) - basic_machine=a29k-amd - os=-udi - ;; - sb1) - basic_machine=mipsisa64sb1-unknown - ;; - sb1el) - basic_machine=mipsisa64sb1el-unknown - ;; - sde) - basic_machine=mipsisa32-sde - os=-elf - ;; - sei) - basic_machine=mips-sei - os=-seiux - ;; - sequent) - basic_machine=i386-sequent - ;; - sh) - basic_machine=sh-hitachi - os=-hms - ;; - sh5el) - basic_machine=sh5le-unknown - ;; - sh64) - basic_machine=sh64-unknown - ;; - sparclite-wrs | simso-wrs) - basic_machine=sparclite-wrs - os=-vxworks - ;; - sps7) - basic_machine=m68k-bull - os=-sysv2 - ;; - spur) - basic_machine=spur-unknown - ;; - st2000) - basic_machine=m68k-tandem - ;; - stratus) - basic_machine=i860-stratus - os=-sysv4 - ;; - sun2) - basic_machine=m68000-sun - ;; - sun2os3) - basic_machine=m68000-sun - os=-sunos3 - ;; - sun2os4) - basic_machine=m68000-sun - os=-sunos4 - ;; - sun3os3) - basic_machine=m68k-sun - os=-sunos3 - ;; - sun3os4) - basic_machine=m68k-sun - os=-sunos4 - ;; - sun4os3) - basic_machine=sparc-sun - os=-sunos3 - ;; - sun4os4) - basic_machine=sparc-sun - os=-sunos4 - ;; - sun4sol2) - basic_machine=sparc-sun - os=-solaris2 - ;; - sun3 | sun3-*) - basic_machine=m68k-sun - ;; - sun4) - basic_machine=sparc-sun - ;; - sun386 | sun386i | roadrunner) - basic_machine=i386-sun - ;; - sv1) - basic_machine=sv1-cray - os=-unicos - ;; - symmetry) - basic_machine=i386-sequent - os=-dynix - ;; - t3e) - basic_machine=alphaev5-cray - os=-unicos - ;; - t90) - basic_machine=t90-cray - os=-unicos - ;; - tic54x | c54x*) - basic_machine=tic54x-unknown - os=-coff - ;; - tic55x | c55x*) - basic_machine=tic55x-unknown - os=-coff - ;; - tic6x | c6x*) - basic_machine=tic6x-unknown - os=-coff - ;; - tile*) - basic_machine=tile-unknown - os=-linux-gnu - ;; - tx39) - basic_machine=mipstx39-unknown - ;; - tx39el) - basic_machine=mipstx39el-unknown - ;; - toad1) - basic_machine=pdp10-xkl - os=-tops20 - ;; - tower | tower-32) - basic_machine=m68k-ncr - ;; - tpf) - basic_machine=s390x-ibm - os=-tpf - ;; - udi29k) - basic_machine=a29k-amd - os=-udi - ;; - ultra3) - basic_machine=a29k-nyu - os=-sym1 - ;; - v810 | necv810) - basic_machine=v810-nec - os=-none - ;; - vaxv) - basic_machine=vax-dec - os=-sysv - ;; - vms) - basic_machine=vax-dec - os=-vms - ;; - vpp*|vx|vx-*) - basic_machine=f301-fujitsu - ;; - vxworks960) - basic_machine=i960-wrs - os=-vxworks - ;; - vxworks68) - basic_machine=m68k-wrs - os=-vxworks - ;; - vxworks29k) - basic_machine=a29k-wrs - os=-vxworks - ;; - w65*) - basic_machine=w65-wdc - os=-none - ;; - w89k-*) - basic_machine=hppa1.1-winbond - os=-proelf - ;; - xbox) - basic_machine=i686-pc - os=-mingw32 - ;; - xps | xps100) - basic_machine=xps100-honeywell - ;; - ymp) - basic_machine=ymp-cray - os=-unicos - ;; - z8k-*-coff) - basic_machine=z8k-unknown - os=-sim - ;; - z80-*-coff) - basic_machine=z80-unknown - os=-sim - ;; - none) - basic_machine=none-none - os=-none - ;; - -# Here we handle the default manufacturer of certain CPU types. It is in -# some cases the only manufacturer, in others, it is the most popular. - w89k) - basic_machine=hppa1.1-winbond - ;; - op50n) - basic_machine=hppa1.1-oki - ;; - op60c) - basic_machine=hppa1.1-oki - ;; - romp) - basic_machine=romp-ibm - ;; - mmix) - basic_machine=mmix-knuth - ;; - rs6000) - basic_machine=rs6000-ibm - ;; - vax) - basic_machine=vax-dec - ;; - pdp10) - # there are many clones, so DEC is not a safe bet - basic_machine=pdp10-unknown - ;; - pdp11) - basic_machine=pdp11-dec - ;; - we32k) - basic_machine=we32k-att - ;; - sh[1234] | sh[24]a | sh[24]aeb | sh[34]eb | sh[1234]le | sh[23]ele) - basic_machine=sh-unknown - ;; - sparc | sparcv8 | sparcv9 | sparcv9b | sparcv9v) - basic_machine=sparc-sun - ;; - cydra) - basic_machine=cydra-cydrome - ;; - orion) - basic_machine=orion-highlevel - ;; - orion105) - basic_machine=clipper-highlevel - ;; - mac | mpw | mac-mpw) - basic_machine=m68k-apple - ;; - pmac | pmac-mpw) - basic_machine=powerpc-apple - ;; - *-unknown) - # Make sure to match an already-canonicalized machine name. - ;; - *) - echo Invalid configuration \`$1\': machine \`$basic_machine\' not recognized 1>&2 - exit 1 - ;; -esac - -# Here we canonicalize certain aliases for manufacturers. -case $basic_machine in - *-digital*) - basic_machine=`echo $basic_machine | sed 's/digital.*/dec/'` - ;; - *-commodore*) - basic_machine=`echo $basic_machine | sed 's/commodore.*/cbm/'` - ;; - *) - ;; -esac - -# Decode manufacturer-specific aliases for certain operating systems. - -if [ x"$os" != x"" ] -then -case $os in - # First match some system type aliases - # that might get confused with valid system types. - # -solaris* is a basic system type, with this one exception. - -solaris1 | -solaris1.*) - os=`echo $os | sed -e 's|solaris1|sunos4|'` - ;; - -solaris) - os=-solaris2 - ;; - -svr4*) - os=-sysv4 - ;; - -unixware*) - os=-sysv4.2uw - ;; - -gnu/linux*) - os=`echo $os | sed -e 's|gnu/linux|linux-gnu|'` - ;; - # First accept the basic system types. - # The portable systems comes first. - # Each alternative MUST END IN A *, to match a version number. - # -sysv* is not here because it comes later, after sysvr4. - -gnu* | -bsd* | -mach* | -minix* | -genix* | -ultrix* | -irix* \ - | -*vms* | -sco* | -esix* | -isc* | -aix* | -sunos | -sunos[34]*\ - | -hpux* | -unos* | -osf* | -luna* | -dgux* | -solaris* | -sym* \ - | -kopensolaris* \ - | -amigaos* | -amigados* | -msdos* | -newsos* | -unicos* | -aof* \ - | -aos* | -aros* \ - | -nindy* | -vxsim* | -vxworks* | -ebmon* | -hms* | -mvs* \ - | -clix* | -riscos* | -uniplus* | -iris* | -rtu* | -xenix* \ - | -hiux* | -386bsd* | -knetbsd* | -mirbsd* | -netbsd* \ - | -openbsd* | -solidbsd* \ - | -ekkobsd* | -kfreebsd* | -freebsd* | -riscix* | -lynxos* \ - | -bosx* | -nextstep* | -cxux* | -aout* | -elf* | -oabi* \ - | -ptx* | -coff* | -ecoff* | -winnt* | -domain* | -vsta* \ - | -udi* | -eabi* | -lites* | -ieee* | -go32* | -aux* \ - | -chorusos* | -chorusrdb* | -cegcc* \ - | -cygwin* | -pe* | -psos* | -moss* | -proelf* | -rtems* \ - | -mingw32* | -linux-gnu* | -linux-newlib* | -linux-uclibc* \ - | -uxpv* | -beos* | -mpeix* | -udk* \ - | -interix* | -uwin* | -mks* | -rhapsody* | -darwin* | -opened* \ - | -openstep* | -oskit* | -conix* | -pw32* | -nonstopux* \ - | -storm-chaos* | -tops10* | -tenex* | -tops20* | -its* \ - | -os2* | -vos* | -palmos* | -uclinux* | -nucleus* \ - | -morphos* | -superux* | -rtmk* | -rtmk-nova* | -windiss* \ - | -powermax* | -dnix* | -nx6 | -nx7 | -sei* | -dragonfly* \ - | -skyos* | -haiku* | -rdos* | -toppers* | -drops*) - # Remember, each alternative MUST END IN *, to match a version number. - ;; - -qnx*) - case $basic_machine in - x86-* | i*86-*) - ;; - *) - os=-nto$os - ;; - esac - ;; - -nto-qnx*) - ;; - -nto*) - os=`echo $os | sed -e 's|nto|nto-qnx|'` - ;; - -sim | -es1800* | -hms* | -xray | -os68k* | -none* | -v88r* \ - | -windows* | -osx | -abug | -netware* | -os9* | -beos* | -haiku* \ - | -macos* | -mpw* | -magic* | -mmixware* | -mon960* | -lnews*) - ;; - -mac*) - os=`echo $os | sed -e 's|mac|macos|'` - ;; - -linux-dietlibc) - os=-linux-dietlibc - ;; - -linux*) - os=`echo $os | sed -e 's|linux|linux-gnu|'` - ;; - -sunos5*) - os=`echo $os | sed -e 's|sunos5|solaris2|'` - ;; - -sunos6*) - os=`echo $os | sed -e 's|sunos6|solaris3|'` - ;; - -opened*) - os=-openedition - ;; - -os400*) - os=-os400 - ;; - -wince*) - os=-wince - ;; - -osfrose*) - os=-osfrose - ;; - -osf*) - os=-osf - ;; - -utek*) - os=-bsd - ;; - -dynix*) - os=-bsd - ;; - -acis*) - os=-aos - ;; - -atheos*) - os=-atheos - ;; - -syllable*) - os=-syllable - ;; - -386bsd) - os=-bsd - ;; - -ctix* | -uts*) - os=-sysv - ;; - -nova*) - os=-rtmk-nova - ;; - -ns2 ) - os=-nextstep2 - ;; - -nsk*) - os=-nsk - ;; - # Preserve the version number of sinix5. - -sinix5.*) - os=`echo $os | sed -e 's|sinix|sysv|'` - ;; - -sinix*) - os=-sysv4 - ;; - -tpf*) - os=-tpf - ;; - -triton*) - os=-sysv3 - ;; - -oss*) - os=-sysv3 - ;; - -svr4) - os=-sysv4 - ;; - -svr3) - os=-sysv3 - ;; - -sysvr4) - os=-sysv4 - ;; - # This must come after -sysvr4. - -sysv*) - ;; - -ose*) - os=-ose - ;; - -es1800*) - os=-ose - ;; - -xenix) - os=-xenix - ;; - -*mint | -mint[0-9]* | -*MiNT | -MiNT[0-9]*) - os=-mint - ;; - -aros*) - os=-aros - ;; - -kaos*) - os=-kaos - ;; - -zvmoe) - os=-zvmoe - ;; - -dicos*) - os=-dicos - ;; - -none) - ;; - *) - # Get rid of the `-' at the beginning of $os. - os=`echo $os | sed 's/[^-]*-//'` - echo Invalid configuration \`$1\': system \`$os\' not recognized 1>&2 - exit 1 - ;; -esac -else - -# Here we handle the default operating systems that come with various machines. -# The value should be what the vendor currently ships out the door with their -# machine or put another way, the most popular os provided with the machine. - -# Note that if you're going to try to match "-MANUFACTURER" here (say, -# "-sun"), then you have to tell the case statement up towards the top -# that MANUFACTURER isn't an operating system. Otherwise, code above -# will signal an error saying that MANUFACTURER isn't an operating -# system, and we'll never get to this point. - -case $basic_machine in - score-*) - os=-elf - ;; - spu-*) - os=-elf - ;; - *-acorn) - os=-riscix1.2 - ;; - arm*-rebel) - os=-linux - ;; - arm*-semi) - os=-aout - ;; - c4x-* | tic4x-*) - os=-coff - ;; - # This must come before the *-dec entry. - pdp10-*) - os=-tops20 - ;; - pdp11-*) - os=-none - ;; - *-dec | vax-*) - os=-ultrix4.2 - ;; - m68*-apollo) - os=-domain - ;; - i386-sun) - os=-sunos4.0.2 - ;; - m68000-sun) - os=-sunos3 - # This also exists in the configure program, but was not the - # default. - # os=-sunos4 - ;; - m68*-cisco) - os=-aout - ;; - mep-*) - os=-elf - ;; - mips*-cisco) - os=-elf - ;; - mips*-*) - os=-elf - ;; - or32-*) - os=-coff - ;; - *-tti) # must be before sparc entry or we get the wrong os. - os=-sysv3 - ;; - sparc-* | *-sun) - os=-sunos4.1.1 - ;; - *-be) - os=-beos - ;; - *-haiku) - os=-haiku - ;; - *-ibm) - os=-aix - ;; - *-knuth) - os=-mmixware - ;; - *-wec) - os=-proelf - ;; - *-winbond) - os=-proelf - ;; - *-oki) - os=-proelf - ;; - *-hp) - os=-hpux - ;; - *-hitachi) - os=-hiux - ;; - i860-* | *-att | *-ncr | *-altos | *-motorola | *-convergent) - os=-sysv - ;; - *-cbm) - os=-amigaos - ;; - *-dg) - os=-dgux - ;; - *-dolphin) - os=-sysv3 - ;; - m68k-ccur) - os=-rtu - ;; - m88k-omron*) - os=-luna - ;; - *-next ) - os=-nextstep - ;; - *-sequent) - os=-ptx - ;; - *-crds) - os=-unos - ;; - *-ns) - os=-genix - ;; - i370-*) - os=-mvs - ;; - *-next) - os=-nextstep3 - ;; - *-gould) - os=-sysv - ;; - *-highlevel) - os=-bsd - ;; - *-encore) - os=-bsd - ;; - *-sgi) - os=-irix - ;; - *-siemens) - os=-sysv4 - ;; - *-masscomp) - os=-rtu - ;; - f30[01]-fujitsu | f700-fujitsu) - os=-uxpv - ;; - *-rom68k) - os=-coff - ;; - *-*bug) - os=-coff - ;; - *-apple) - os=-macos - ;; - *-atari*) - os=-mint - ;; - *) - os=-none - ;; -esac -fi - -# Here we handle the case where we know the os, and the CPU type, but not the -# manufacturer. We pick the logical manufacturer. -vendor=unknown -case $basic_machine in - *-unknown) - case $os in - -riscix*) - vendor=acorn - ;; - -sunos*) - vendor=sun - ;; - -aix*) - vendor=ibm - ;; - -beos*) - vendor=be - ;; - -hpux*) - vendor=hp - ;; - -mpeix*) - vendor=hp - ;; - -hiux*) - vendor=hitachi - ;; - -unos*) - vendor=crds - ;; - -dgux*) - vendor=dg - ;; - -luna*) - vendor=omron - ;; - -genix*) - vendor=ns - ;; - -mvs* | -opened*) - vendor=ibm - ;; - -os400*) - vendor=ibm - ;; - -ptx*) - vendor=sequent - ;; - -tpf*) - vendor=ibm - ;; - -vxsim* | -vxworks* | -windiss*) - vendor=wrs - ;; - -aux*) - vendor=apple - ;; - -hms*) - vendor=hitachi - ;; - -mpw* | -macos*) - vendor=apple - ;; - -*mint | -mint[0-9]* | -*MiNT | -MiNT[0-9]*) - vendor=atari - ;; - -vos*) - vendor=stratus - ;; - esac - basic_machine=`echo $basic_machine | sed "s/unknown/$vendor/"` - ;; -esac - -echo $basic_machine$os -exit - -# Local variables: -# eval: (add-hook 'write-file-hooks 'time-stamp) -# time-stamp-start: "timestamp='" -# time-stamp-format: "%:y-%02m-%02d" -# time-stamp-end: "'" -# End: diff --git a/pixman/configure b/pixman/configure deleted file mode 100644 index 97b2b13e8..000000000 --- a/pixman/configure +++ /dev/null @@ -1,14368 +0,0 @@ -#! /bin/sh -# Guess values for system-dependent variables and create Makefiles. -# Generated by GNU Autoconf 2.65 for pixman 0.18.2. -# -# Report bugs to <"pixman@lists.freedesktop.org">. -# -# -# Copyright (C) 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001, -# 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009 Free Software Foundation, -# Inc. -# -# -# This configure script is free software; the Free Software Foundation -# gives unlimited permission to copy, distribute and modify it. -## -------------------- ## -## M4sh Initialization. ## -## -------------------- ## - -# Be more Bourne compatible -DUALCASE=1; export DUALCASE # for MKS sh -if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then : - emulate sh - NULLCMD=: - # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which - # is contrary to our usage. Disable this feature. - alias -g '${1+"$@"}'='"$@"' - setopt NO_GLOB_SUBST -else - case `(set -o) 2>/dev/null` in #( - *posix*) : - set -o posix ;; #( - *) : - ;; -esac -fi - - -as_nl=' -' -export as_nl -# Printing a long string crashes Solaris 7 /usr/bin/printf. -as_echo='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\' -as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo -as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo$as_echo -# Prefer a ksh shell builtin over an external printf program on Solaris, -# but without wasting forks for bash or zsh. -if test -z "$BASH_VERSION$ZSH_VERSION" \ - && (test "X`print -r -- $as_echo`" = "X$as_echo") 2>/dev/null; then - as_echo='print -r --' - as_echo_n='print -rn --' -elif (test "X`printf %s $as_echo`" = "X$as_echo") 2>/dev/null; then - as_echo='printf %s\n' - as_echo_n='printf %s' -else - if test "X`(/usr/ucb/echo -n -n $as_echo) 2>/dev/null`" = "X-n $as_echo"; then - as_echo_body='eval /usr/ucb/echo -n "$1$as_nl"' - as_echo_n='/usr/ucb/echo -n' - else - as_echo_body='eval expr "X$1" : "X\\(.*\\)"' - as_echo_n_body='eval - arg=$1; - case $arg in #( - *"$as_nl"*) - expr "X$arg" : "X\\(.*\\)$as_nl"; - arg=`expr "X$arg" : ".*$as_nl\\(.*\\)"`;; - esac; - expr "X$arg" : "X\\(.*\\)" | tr -d "$as_nl" - ' - export as_echo_n_body - as_echo_n='sh -c $as_echo_n_body as_echo' - fi - export as_echo_body - as_echo='sh -c $as_echo_body as_echo' -fi - -# The user is always right. -if test "${PATH_SEPARATOR+set}" != set; then - PATH_SEPARATOR=: - (PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 && { - (PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 || - PATH_SEPARATOR=';' - } -fi - - -# IFS -# We need space, tab and new line, in precisely that order. Quoting is -# there to prevent editors from complaining about space-tab. -# (If _AS_PATH_WALK were called with IFS unset, it would disable word -# splitting by setting IFS to empty value.) -IFS=" "" $as_nl" - -# Find who we are. Look in the path if we contain no directory separator. -case $0 in #(( - *[\\/]* ) as_myself=$0 ;; - *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break - done -IFS=$as_save_IFS - - ;; -esac -# We did not find ourselves, most probably we were run as `sh COMMAND' -# in which case we are not to be found in the path. -if test "x$as_myself" = x; then - as_myself=$0 -fi -if test ! -f "$as_myself"; then - $as_echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2 - exit 1 -fi - -# Unset variables that we do not need and which cause bugs (e.g. in -# pre-3.0 UWIN ksh). But do not cause bugs in bash 2.01; the "|| exit 1" -# suppresses any "Segmentation fault" message there. '((' could -# trigger a bug in pdksh 5.2.14. -for as_var in BASH_ENV ENV MAIL MAILPATH -do eval test x\${$as_var+set} = xset \ - && ( (unset $as_var) || exit 1) >/dev/null 2>&1 && unset $as_var || : -done -PS1='$ ' -PS2='> ' -PS4='+ ' - -# NLS nuisances. -LC_ALL=C -export LC_ALL -LANGUAGE=C -export LANGUAGE - -# CDPATH. -(unset CDPATH) >/dev/null 2>&1 && unset CDPATH - -if test "x$CONFIG_SHELL" = x; then - as_bourne_compatible="if test -n \"\${ZSH_VERSION+set}\" && (emulate sh) >/dev/null 2>&1; then : - emulate sh - NULLCMD=: - # Pre-4.2 versions of Zsh do word splitting on \${1+\"\$@\"}, which - # is contrary to our usage. Disable this feature. - alias -g '\${1+\"\$@\"}'='\"\$@\"' - setopt NO_GLOB_SUBST -else - case \`(set -o) 2>/dev/null\` in #( - *posix*) : - set -o posix ;; #( - *) : - ;; -esac -fi -" - as_required="as_fn_return () { (exit \$1); } -as_fn_success () { as_fn_return 0; } -as_fn_failure () { as_fn_return 1; } -as_fn_ret_success () { return 0; } -as_fn_ret_failure () { return 1; } - -exitcode=0 -as_fn_success || { exitcode=1; echo as_fn_success failed.; } -as_fn_failure && { exitcode=1; echo as_fn_failure succeeded.; } -as_fn_ret_success || { exitcode=1; echo as_fn_ret_success failed.; } -as_fn_ret_failure && { exitcode=1; echo as_fn_ret_failure succeeded.; } -if ( set x; as_fn_ret_success y && test x = \"\$1\" ); then : - -else - exitcode=1; echo positional parameters were not saved. -fi -test x\$exitcode = x0 || exit 1" - as_suggested=" as_lineno_1=";as_suggested=$as_suggested$LINENO;as_suggested=$as_suggested" as_lineno_1a=\$LINENO - as_lineno_2=";as_suggested=$as_suggested$LINENO;as_suggested=$as_suggested" as_lineno_2a=\$LINENO - eval 'test \"x\$as_lineno_1'\$as_run'\" != \"x\$as_lineno_2'\$as_run'\" && - test \"x\`expr \$as_lineno_1'\$as_run' + 1\`\" = \"x\$as_lineno_2'\$as_run'\"' || exit 1 -test \$(( 1 + 1 )) = 2 || exit 1" - if (eval "$as_required") 2>/dev/null; then : - as_have_required=yes -else - as_have_required=no -fi - if test x$as_have_required = xyes && (eval "$as_suggested") 2>/dev/null; then : - -else - as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -as_found=false -for as_dir in /bin$PATH_SEPARATOR/usr/bin$PATH_SEPARATOR$PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - as_found=: - case $as_dir in #( - /*) - for as_base in sh bash ksh sh5; do - # Try only shells that exist, to save several forks. - as_shell=$as_dir/$as_base - if { test -f "$as_shell" || test -f "$as_shell.exe"; } && - { $as_echo "$as_bourne_compatible""$as_required" | as_run=a "$as_shell"; } 2>/dev/null; then : - CONFIG_SHELL=$as_shell as_have_required=yes - if { $as_echo "$as_bourne_compatible""$as_suggested" | as_run=a "$as_shell"; } 2>/dev/null; then : - break 2 -fi -fi - done;; - esac - as_found=false -done -$as_found || { if { test -f "$SHELL" || test -f "$SHELL.exe"; } && - { $as_echo "$as_bourne_compatible""$as_required" | as_run=a "$SHELL"; } 2>/dev/null; then : - CONFIG_SHELL=$SHELL as_have_required=yes -fi; } -IFS=$as_save_IFS - - - if test "x$CONFIG_SHELL" != x; then : - # We cannot yet assume a decent shell, so we have to provide a - # neutralization value for shells without unset; and this also - # works around shells that cannot unset nonexistent variables. - BASH_ENV=/dev/null - ENV=/dev/null - (unset BASH_ENV) >/dev/null 2>&1 && unset BASH_ENV ENV - export CONFIG_SHELL - exec "$CONFIG_SHELL" "$as_myself" ${1+"$@"} -fi - - if test x$as_have_required = xno; then : - $as_echo "$0: This script requires a shell more modern than all" - $as_echo "$0: the shells that I found on your system." - if test x${ZSH_VERSION+set} = xset ; then - $as_echo "$0: In particular, zsh $ZSH_VERSION has bugs and should" - $as_echo "$0: be upgraded to zsh 4.3.4 or later." - else - $as_echo "$0: Please tell bug-autoconf@gnu.org and -$0: "pixman@lists.freedesktop.org" about your system, -$0: including any error possibly output before this -$0: message. Then install a modern shell, or manually run -$0: the script under such a shell if you do have one." - fi - exit 1 -fi -fi -fi -SHELL=${CONFIG_SHELL-/bin/sh} -export SHELL -# Unset more variables known to interfere with behavior of common tools. -CLICOLOR_FORCE= GREP_OPTIONS= -unset CLICOLOR_FORCE GREP_OPTIONS - -## --------------------- ## -## M4sh Shell Functions. ## -## --------------------- ## -# as_fn_unset VAR -# --------------- -# Portably unset VAR. -as_fn_unset () -{ - { eval $1=; unset $1;} -} -as_unset=as_fn_unset - -# as_fn_set_status STATUS -# ----------------------- -# Set $? to STATUS, without forking. -as_fn_set_status () -{ - return $1 -} # as_fn_set_status - -# as_fn_exit STATUS -# ----------------- -# Exit the shell with STATUS, even in a "trap 0" or "set -e" context. -as_fn_exit () -{ - set +e - as_fn_set_status $1 - exit $1 -} # as_fn_exit - -# as_fn_mkdir_p -# ------------- -# Create "$as_dir" as a directory, including parents if necessary. -as_fn_mkdir_p () -{ - - case $as_dir in #( - -*) as_dir=./$as_dir;; - esac - test -d "$as_dir" || eval $as_mkdir_p || { - as_dirs= - while :; do - case $as_dir in #( - *\'*) as_qdir=`$as_echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #'( - *) as_qdir=$as_dir;; - esac - as_dirs="'$as_qdir' $as_dirs" - as_dir=`$as_dirname -- "$as_dir" || -$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ - X"$as_dir" : 'X\(//\)[^/]' \| \ - X"$as_dir" : 'X\(//\)$' \| \ - X"$as_dir" : 'X\(/\)' \| . 2>/dev/null || -$as_echo X"$as_dir" | - sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ - s//\1/ - q - } - /^X\(\/\/\)[^/].*/{ - s//\1/ - q - } - /^X\(\/\/\)$/{ - s//\1/ - q - } - /^X\(\/\).*/{ - s//\1/ - q - } - s/.*/./; q'` - test -d "$as_dir" && break - done - test -z "$as_dirs" || eval "mkdir $as_dirs" - } || test -d "$as_dir" || as_fn_error "cannot create directory $as_dir" - - -} # as_fn_mkdir_p -# as_fn_append VAR VALUE -# ---------------------- -# Append the text in VALUE to the end of the definition contained in VAR. Take -# advantage of any shell optimizations that allow amortized linear growth over -# repeated appends, instead of the typical quadratic growth present in naive -# implementations. -if (eval "as_var=1; as_var+=2; test x\$as_var = x12") 2>/dev/null; then : - eval 'as_fn_append () - { - eval $1+=\$2 - }' -else - as_fn_append () - { - eval $1=\$$1\$2 - } -fi # as_fn_append - -# as_fn_arith ARG... -# ------------------ -# Perform arithmetic evaluation on the ARGs, and store the result in the -# global $as_val. Take advantage of shells that can avoid forks. The arguments -# must be portable across $(()) and expr. -if (eval "test \$(( 1 + 1 )) = 2") 2>/dev/null; then : - eval 'as_fn_arith () - { - as_val=$(( $* )) - }' -else - as_fn_arith () - { - as_val=`expr "$@" || test $? -eq 1` - } -fi # as_fn_arith - - -# as_fn_error ERROR [LINENO LOG_FD] -# --------------------------------- -# Output "`basename $0`: error: ERROR" to stderr. If LINENO and LOG_FD are -# provided, also output the error to LOG_FD, referencing LINENO. Then exit the -# script with status $?, using 1 if that was 0. -as_fn_error () -{ - as_status=$?; test $as_status -eq 0 && as_status=1 - if test "$3"; then - as_lineno=${as_lineno-"$2"} as_lineno_stack=as_lineno_stack=$as_lineno_stack - $as_echo "$as_me:${as_lineno-$LINENO}: error: $1" >&$3 - fi - $as_echo "$as_me: error: $1" >&2 - as_fn_exit $as_status -} # as_fn_error - -if expr a : '\(a\)' >/dev/null 2>&1 && - test "X`expr 00001 : '.*\(...\)'`" = X001; then - as_expr=expr -else - as_expr=false -fi - -if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then - as_basename=basename -else - as_basename=false -fi - -if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then - as_dirname=dirname -else - as_dirname=false -fi - -as_me=`$as_basename -- "$0" || -$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \ - X"$0" : 'X\(//\)$' \| \ - X"$0" : 'X\(/\)' \| . 2>/dev/null || -$as_echo X/"$0" | - sed '/^.*\/\([^/][^/]*\)\/*$/{ - s//\1/ - q - } - /^X\/\(\/\/\)$/{ - s//\1/ - q - } - /^X\/\(\/\).*/{ - s//\1/ - q - } - s/.*/./; q'` - -# Avoid depending upon Character Ranges. -as_cr_letters='abcdefghijklmnopqrstuvwxyz' -as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ' -as_cr_Letters=$as_cr_letters$as_cr_LETTERS -as_cr_digits='0123456789' -as_cr_alnum=$as_cr_Letters$as_cr_digits - - - as_lineno_1=$LINENO as_lineno_1a=$LINENO - as_lineno_2=$LINENO as_lineno_2a=$LINENO - eval 'test "x$as_lineno_1'$as_run'" != "x$as_lineno_2'$as_run'" && - test "x`expr $as_lineno_1'$as_run' + 1`" = "x$as_lineno_2'$as_run'"' || { - # Blame Lee E. McMahon (1931-1989) for sed's syntax. :-) - sed -n ' - p - /[$]LINENO/= - ' <$as_myself | - sed ' - s/[$]LINENO.*/&-/ - t lineno - b - :lineno - N - :loop - s/[$]LINENO\([^'$as_cr_alnum'_].*\n\)\(.*\)/\2\1\2/ - t loop - s/-\n.*// - ' >$as_me.lineno && - chmod +x "$as_me.lineno" || - { $as_echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2; as_fn_exit 1; } - - # Don't try to exec as it changes $[0], causing all sort of problems - # (the dirname of $[0] is not the place where we might find the - # original and so on. Autoconf is especially sensitive to this). - . "./$as_me.lineno" - # Exit status is that of the last command. - exit -} - -ECHO_C= ECHO_N= ECHO_T= -case `echo -n x` in #((((( --n*) - case `echo 'xy\c'` in - *c*) ECHO_T=' ';; # ECHO_T is single tab character. - xy) ECHO_C='\c';; - *) echo `echo ksh88 bug on AIX 6.1` > /dev/null - ECHO_T=' ';; - esac;; -*) - ECHO_N='-n';; -esac - -rm -f conf$$ conf$$.exe conf$$.file -if test -d conf$$.dir; then - rm -f conf$$.dir/conf$$.file -else - rm -f conf$$.dir - mkdir conf$$.dir 2>/dev/null -fi -if (echo >conf$$.file) 2>/dev/null; then - if ln -s conf$$.file conf$$ 2>/dev/null; then - as_ln_s='ln -s' - # ... but there are two gotchas: - # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail. - # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable. - # In both cases, we have to default to `cp -p'. - ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe || - as_ln_s='cp -p' - elif ln conf$$.file conf$$ 2>/dev/null; then - as_ln_s=ln - else - as_ln_s='cp -p' - fi -else - as_ln_s='cp -p' -fi -rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file -rmdir conf$$.dir 2>/dev/null - -if mkdir -p . 2>/dev/null; then - as_mkdir_p='mkdir -p "$as_dir"' -else - test -d ./-p && rmdir ./-p - as_mkdir_p=false -fi - -if test -x / >/dev/null 2>&1; then - as_test_x='test -x' -else - if ls -dL / >/dev/null 2>&1; then - as_ls_L_option=L - else - as_ls_L_option= - fi - as_test_x=' - eval sh -c '\'' - if test -d "$1"; then - test -d "$1/."; - else - case $1 in #( - -*)set "./$1";; - esac; - case `ls -ld'$as_ls_L_option' "$1" 2>/dev/null` in #(( - ???[sx]*):;;*)false;;esac;fi - '\'' sh - ' -fi -as_executable_p=$as_test_x - -# Sed expression to map a string onto a valid CPP name. -as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'" - -# Sed expression to map a string onto a valid variable name. -as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'" - - - -# Check that we are running under the correct shell. -SHELL=${CONFIG_SHELL-/bin/sh} - -case X$lt_ECHO in -X*--fallback-echo) - # Remove one level of quotation (which was required for Make). - ECHO=`echo "$lt_ECHO" | sed 's,\\\\\$\\$0,'$0','` - ;; -esac - -ECHO=${lt_ECHO-echo} -if test "X$1" = X--no-reexec; then - # Discard the --no-reexec flag, and continue. - shift -elif test "X$1" = X--fallback-echo; then - # Avoid inline document here, it may be left over - : -elif test "X`{ $ECHO '\t'; } 2>/dev/null`" = 'X\t' ; then - # Yippee, $ECHO works! - : -else - # Restart under the correct shell. - exec $SHELL "$0" --no-reexec ${1+"$@"} -fi - -if test "X$1" = X--fallback-echo; then - # used as fallback echo - shift - cat <<_LT_EOF -$* -_LT_EOF - exit 0 -fi - -# The HP-UX ksh and POSIX shell print the target directory to stdout -# if CDPATH is set. -(unset CDPATH) >/dev/null 2>&1 && unset CDPATH - -if test -z "$lt_ECHO"; then - if test "X${echo_test_string+set}" != Xset; then - # find a string as large as possible, as long as the shell can cope with it - for cmd in 'sed 50q "$0"' 'sed 20q "$0"' 'sed 10q "$0"' 'sed 2q "$0"' 'echo test'; do - # expected sizes: less than 2Kb, 1Kb, 512 bytes, 16 bytes, ... - if { echo_test_string=`eval $cmd`; } 2>/dev/null && - { test "X$echo_test_string" = "X$echo_test_string"; } 2>/dev/null - then - break - fi - done - fi - - if test "X`{ $ECHO '\t'; } 2>/dev/null`" = 'X\t' && - echo_testing_string=`{ $ECHO "$echo_test_string"; } 2>/dev/null` && - test "X$echo_testing_string" = "X$echo_test_string"; then - : - else - # The Solaris, AIX, and Digital Unix default echo programs unquote - # backslashes. This makes it impossible to quote backslashes using - # echo "$something" | sed 's/\\/\\\\/g' - # - # So, first we look for a working echo in the user's PATH. - - lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR - for dir in $PATH /usr/ucb; do - IFS="$lt_save_ifs" - if (test -f $dir/echo || test -f $dir/echo$ac_exeext) && - test "X`($dir/echo '\t') 2>/dev/null`" = 'X\t' && - echo_testing_string=`($dir/echo "$echo_test_string") 2>/dev/null` && - test "X$echo_testing_string" = "X$echo_test_string"; then - ECHO="$dir/echo" - break - fi - done - IFS="$lt_save_ifs" - - if test "X$ECHO" = Xecho; then - # We didn't find a better echo, so look for alternatives. - if test "X`{ print -r '\t'; } 2>/dev/null`" = 'X\t' && - echo_testing_string=`{ print -r "$echo_test_string"; } 2>/dev/null` && - test "X$echo_testing_string" = "X$echo_test_string"; then - # This shell has a builtin print -r that does the trick. - ECHO='print -r' - elif { test -f /bin/ksh || test -f /bin/ksh$ac_exeext; } && - test "X$CONFIG_SHELL" != X/bin/ksh; then - # If we have ksh, try running configure again with it. - ORIGINAL_CONFIG_SHELL=${CONFIG_SHELL-/bin/sh} - export ORIGINAL_CONFIG_SHELL - CONFIG_SHELL=/bin/ksh - export CONFIG_SHELL - exec $CONFIG_SHELL "$0" --no-reexec ${1+"$@"} - else - # Try using printf. - ECHO='printf %s\n' - if test "X`{ $ECHO '\t'; } 2>/dev/null`" = 'X\t' && - echo_testing_string=`{ $ECHO "$echo_test_string"; } 2>/dev/null` && - test "X$echo_testing_string" = "X$echo_test_string"; then - # Cool, printf works - : - elif echo_testing_string=`($ORIGINAL_CONFIG_SHELL "$0" --fallback-echo '\t') 2>/dev/null` && - test "X$echo_testing_string" = 'X\t' && - echo_testing_string=`($ORIGINAL_CONFIG_SHELL "$0" --fallback-echo "$echo_test_string") 2>/dev/null` && - test "X$echo_testing_string" = "X$echo_test_string"; then - CONFIG_SHELL=$ORIGINAL_CONFIG_SHELL - export CONFIG_SHELL - SHELL="$CONFIG_SHELL" - export SHELL - ECHO="$CONFIG_SHELL $0 --fallback-echo" - elif echo_testing_string=`($CONFIG_SHELL "$0" --fallback-echo '\t') 2>/dev/null` && - test "X$echo_testing_string" = 'X\t' && - echo_testing_string=`($CONFIG_SHELL "$0" --fallback-echo "$echo_test_string") 2>/dev/null` && - test "X$echo_testing_string" = "X$echo_test_string"; then - ECHO="$CONFIG_SHELL $0 --fallback-echo" - else - # maybe with a smaller string... - prev=: - - for cmd in 'echo test' 'sed 2q "$0"' 'sed 10q "$0"' 'sed 20q "$0"' 'sed 50q "$0"'; do - if { test "X$echo_test_string" = "X`eval $cmd`"; } 2>/dev/null - then - break - fi - prev="$cmd" - done - - if test "$prev" != 'sed 50q "$0"'; then - echo_test_string=`eval $prev` - export echo_test_string - exec ${ORIGINAL_CONFIG_SHELL-${CONFIG_SHELL-/bin/sh}} "$0" ${1+"$@"} - else - # Oops. We lost completely, so just stick with echo. - ECHO=echo - fi - fi - fi - fi - fi -fi - -# Copy echo and quote the copy suitably for passing to libtool from -# the Makefile, instead of quoting the original, which is used later. -lt_ECHO=$ECHO -if test "X$lt_ECHO" = "X$CONFIG_SHELL $0 --fallback-echo"; then - lt_ECHO="$CONFIG_SHELL \\\$\$0 --fallback-echo" -fi - - - - -test -n "$DJDIR" || exec 7<&0 </dev/null -exec 6>&1 - -# Name of the host. -# hostname on some systems (SVR3.2, Linux) returns a bogus exit status, -# so uname gets run too. -ac_hostname=`(hostname || uname -n) 2>/dev/null | sed 1q` - -# -# Initializations. -# -ac_default_prefix=/usr/local -ac_clean_files= -ac_config_libobj_dir=. -LIBOBJS= -cross_compiling=no -subdirs= -MFLAGS= -MAKEFLAGS= - -# Identity of this package. -PACKAGE_NAME='pixman' -PACKAGE_TARNAME='pixman' -PACKAGE_VERSION='0.18.2' -PACKAGE_STRING='pixman 0.18.2' -PACKAGE_BUGREPORT='"pixman@lists.freedesktop.org"' -PACKAGE_URL='' - -# Factoring default headers for most tests. -ac_includes_default="\ -#include <stdio.h> -#ifdef HAVE_SYS_TYPES_H -# include <sys/types.h> -#endif -#ifdef HAVE_SYS_STAT_H -# include <sys/stat.h> -#endif -#ifdef STDC_HEADERS -# include <stdlib.h> -# include <stddef.h> -#else -# ifdef HAVE_STDLIB_H -# include <stdlib.h> -# endif -#endif -#ifdef HAVE_STRING_H -# if !defined STDC_HEADERS && defined HAVE_MEMORY_H -# include <memory.h> -# endif -# include <string.h> -#endif -#ifdef HAVE_STRINGS_H -# include <strings.h> -#endif -#ifdef HAVE_INTTYPES_H -# include <inttypes.h> -#endif -#ifdef HAVE_STDINT_H -# include <stdint.h> -#endif -#ifdef HAVE_UNISTD_H -# include <unistd.h> -#endif" - -ac_subst_vars='am__EXEEXT_FALSE -am__EXEEXT_TRUE -LTLIBOBJS -LIBOBJS -PTHREAD_LDFLAGS -HAVE_PTHREAD_SETSPECIFIC -TOOLCHAIN_SUPPORTS__THREAD -DEP_LIBS -DEP_CFLAGS -HAVE_GTK_FALSE -HAVE_GTK_TRUE -GTK_LIBS -GTK_CFLAGS -PKG_CONFIG -PIXMAN_TIMERS -USE_GCC_INLINE_ASM_FALSE -USE_GCC_INLINE_ASM_TRUE -USE_ARM_NEON_FALSE -USE_ARM_NEON_TRUE -USE_ARM_SIMD_FALSE -USE_ARM_SIMD_TRUE -USE_VMX_FALSE -USE_VMX_TRUE -VMX_CFLAGS -SSE2_LDFLAGS -SSE2_CFLAGS -MMX_LDFLAGS -MMX_CFLAGS -USE_SSE2_FALSE -USE_SSE2_TRUE -USE_MMX_FALSE -USE_MMX_TRUE -PERL -LT_VERSION_INFO -PIXMAN_VERSION_MICRO -PIXMAN_VERSION_MINOR -PIXMAN_VERSION_MAJOR -CPP -OTOOL64 -OTOOL -LIPO -NMEDIT -DSYMUTIL -lt_ECHO -RANLIB -AR -OBJDUMP -LN_S -NM -ac_ct_DUMPBIN -DUMPBIN -LD -FGREP -EGREP -GREP -SED -LIBTOOL -am__fastdepCCAS_FALSE -am__fastdepCCAS_TRUE -CCASDEPMODE -CCASFLAGS -CCAS -am__fastdepCC_FALSE -am__fastdepCC_TRUE -CCDEPMODE -AMDEPBACKSLASH -AMDEP_FALSE -AMDEP_TRUE -am__quote -am__include -DEPDIR -OBJEXT -EXEEXT -ac_ct_CC -CPPFLAGS -LDFLAGS -CFLAGS -CC -host_os -host_vendor -host_cpu -host -build_os -build_vendor -build_cpu -build -AM_BACKSLASH -AM_DEFAULT_VERBOSITY -am__untar -am__tar -AMTAR -am__leading_dot -SET_MAKE -AWK -mkdir_p -MKDIR_P -INSTALL_STRIP_PROGRAM -STRIP -install_sh -MAKEINFO -AUTOHEADER -AUTOMAKE -AUTOCONF -ACLOCAL -VERSION -PACKAGE -CYGPATH_W -am__isrc -INSTALL_DATA -INSTALL_SCRIPT -INSTALL_PROGRAM -target_alias -host_alias -build_alias -LIBS -ECHO_T -ECHO_N -ECHO_C -DEFS -mandir -localedir -libdir -psdir -pdfdir -dvidir -htmldir -infodir -docdir -oldincludedir -includedir -localstatedir -sharedstatedir -sysconfdir -datadir -datarootdir -libexecdir -sbindir -bindir -program_transform_name -prefix -exec_prefix -PACKAGE_URL -PACKAGE_BUGREPORT -PACKAGE_STRING -PACKAGE_VERSION -PACKAGE_TARNAME -PACKAGE_NAME -PATH_SEPARATOR -SHELL' -ac_subst_files='' -ac_user_opts=' -enable_option_checking -enable_silent_rules -enable_dependency_tracking -enable_shared -enable_static -with_pic -enable_fast_install -with_gnu_ld -enable_libtool_lock -enable_mmx -enable_sse2 -enable_vmx -enable_arm_simd -enable_arm_neon -enable_gcc_inline_asm -enable_timers -enable_gtk -' - ac_precious_vars='build_alias -host_alias -target_alias -CC -CFLAGS -LDFLAGS -LIBS -CPPFLAGS -CCAS -CCASFLAGS -CPP -PKG_CONFIG -GTK_CFLAGS -GTK_LIBS' - - -# Initialize some variables set by options. -ac_init_help= -ac_init_version=false -ac_unrecognized_opts= -ac_unrecognized_sep= -# The variables have the same names as the options, with -# dashes changed to underlines. -cache_file=/dev/null -exec_prefix=NONE -no_create= -no_recursion= -prefix=NONE -program_prefix=NONE -program_suffix=NONE -program_transform_name=s,x,x, -silent= -site= -srcdir= -verbose= -x_includes=NONE -x_libraries=NONE - -# Installation directory options. -# These are left unexpanded so users can "make install exec_prefix=/foo" -# and all the variables that are supposed to be based on exec_prefix -# by default will actually change. -# Use braces instead of parens because sh, perl, etc. also accept them. -# (The list follows the same order as the GNU Coding Standards.) -bindir='${exec_prefix}/bin' -sbindir='${exec_prefix}/sbin' -libexecdir='${exec_prefix}/libexec' -datarootdir='${prefix}/share' -datadir='${datarootdir}' -sysconfdir='${prefix}/etc' -sharedstatedir='${prefix}/com' -localstatedir='${prefix}/var' -includedir='${prefix}/include' -oldincludedir='/usr/include' -docdir='${datarootdir}/doc/${PACKAGE_TARNAME}' -infodir='${datarootdir}/info' -htmldir='${docdir}' -dvidir='${docdir}' -pdfdir='${docdir}' -psdir='${docdir}' -libdir='${exec_prefix}/lib' -localedir='${datarootdir}/locale' -mandir='${datarootdir}/man' - -ac_prev= -ac_dashdash= -for ac_option -do - # If the previous option needs an argument, assign it. - if test -n "$ac_prev"; then - eval $ac_prev=\$ac_option - ac_prev= - continue - fi - - case $ac_option in - *=*) ac_optarg=`expr "X$ac_option" : '[^=]*=\(.*\)'` ;; - *) ac_optarg=yes ;; - esac - - # Accept the important Cygnus configure options, so we can diagnose typos. - - case $ac_dashdash$ac_option in - --) - ac_dashdash=yes ;; - - -bindir | --bindir | --bindi | --bind | --bin | --bi) - ac_prev=bindir ;; - -bindir=* | --bindir=* | --bindi=* | --bind=* | --bin=* | --bi=*) - bindir=$ac_optarg ;; - - -build | --build | --buil | --bui | --bu) - ac_prev=build_alias ;; - -build=* | --build=* | --buil=* | --bui=* | --bu=*) - build_alias=$ac_optarg ;; - - -cache-file | --cache-file | --cache-fil | --cache-fi \ - | --cache-f | --cache- | --cache | --cach | --cac | --ca | --c) - ac_prev=cache_file ;; - -cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \ - | --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* | --c=*) - cache_file=$ac_optarg ;; - - --config-cache | -C) - cache_file=config.cache ;; - - -datadir | --datadir | --datadi | --datad) - ac_prev=datadir ;; - -datadir=* | --datadir=* | --datadi=* | --datad=*) - datadir=$ac_optarg ;; - - -datarootdir | --datarootdir | --datarootdi | --datarootd | --dataroot \ - | --dataroo | --dataro | --datar) - ac_prev=datarootdir ;; - -datarootdir=* | --datarootdir=* | --datarootdi=* | --datarootd=* \ - | --dataroot=* | --dataroo=* | --dataro=* | --datar=*) - datarootdir=$ac_optarg ;; - - -disable-* | --disable-*) - ac_useropt=`expr "x$ac_option" : 'x-*disable-\(.*\)'` - # Reject names that are not valid shell variable names. - expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null && - as_fn_error "invalid feature name: $ac_useropt" - ac_useropt_orig=$ac_useropt - ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'` - case $ac_user_opts in - *" -"enable_$ac_useropt" -"*) ;; - *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--disable-$ac_useropt_orig" - ac_unrecognized_sep=', ';; - esac - eval enable_$ac_useropt=no ;; - - -docdir | --docdir | --docdi | --doc | --do) - ac_prev=docdir ;; - -docdir=* | --docdir=* | --docdi=* | --doc=* | --do=*) - docdir=$ac_optarg ;; - - -dvidir | --dvidir | --dvidi | --dvid | --dvi | --dv) - ac_prev=dvidir ;; - -dvidir=* | --dvidir=* | --dvidi=* | --dvid=* | --dvi=* | --dv=*) - dvidir=$ac_optarg ;; - - -enable-* | --enable-*) - ac_useropt=`expr "x$ac_option" : 'x-*enable-\([^=]*\)'` - # Reject names that are not valid shell variable names. - expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null && - as_fn_error "invalid feature name: $ac_useropt" - ac_useropt_orig=$ac_useropt - ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'` - case $ac_user_opts in - *" -"enable_$ac_useropt" -"*) ;; - *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--enable-$ac_useropt_orig" - ac_unrecognized_sep=', ';; - esac - eval enable_$ac_useropt=\$ac_optarg ;; - - -exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \ - | --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \ - | --exec | --exe | --ex) - ac_prev=exec_prefix ;; - -exec-prefix=* | --exec_prefix=* | --exec-prefix=* | --exec-prefi=* \ - | --exec-pref=* | --exec-pre=* | --exec-pr=* | --exec-p=* | --exec-=* \ - | --exec=* | --exe=* | --ex=*) - exec_prefix=$ac_optarg ;; - - -gas | --gas | --ga | --g) - # Obsolete; use --with-gas. - with_gas=yes ;; - - -help | --help | --hel | --he | -h) - ac_init_help=long ;; - -help=r* | --help=r* | --hel=r* | --he=r* | -hr*) - ac_init_help=recursive ;; - -help=s* | --help=s* | --hel=s* | --he=s* | -hs*) - ac_init_help=short ;; - - -host | --host | --hos | --ho) - ac_prev=host_alias ;; - -host=* | --host=* | --hos=* | --ho=*) - host_alias=$ac_optarg ;; - - -htmldir | --htmldir | --htmldi | --htmld | --html | --htm | --ht) - ac_prev=htmldir ;; - -htmldir=* | --htmldir=* | --htmldi=* | --htmld=* | --html=* | --htm=* \ - | --ht=*) - htmldir=$ac_optarg ;; - - -includedir | --includedir | --includedi | --included | --include \ - | --includ | --inclu | --incl | --inc) - ac_prev=includedir ;; - -includedir=* | --includedir=* | --includedi=* | --included=* | --include=* \ - | --includ=* | --inclu=* | --incl=* | --inc=*) - includedir=$ac_optarg ;; - - -infodir | --infodir | --infodi | --infod | --info | --inf) - ac_prev=infodir ;; - -infodir=* | --infodir=* | --infodi=* | --infod=* | --info=* | --inf=*) - infodir=$ac_optarg ;; - - -libdir | --libdir | --libdi | --libd) - ac_prev=libdir ;; - -libdir=* | --libdir=* | --libdi=* | --libd=*) - libdir=$ac_optarg ;; - - -libexecdir | --libexecdir | --libexecdi | --libexecd | --libexec \ - | --libexe | --libex | --libe) - ac_prev=libexecdir ;; - -libexecdir=* | --libexecdir=* | --libexecdi=* | --libexecd=* | --libexec=* \ - | --libexe=* | --libex=* | --libe=*) - libexecdir=$ac_optarg ;; - - -localedir | --localedir | --localedi | --localed | --locale) - ac_prev=localedir ;; - -localedir=* | --localedir=* | --localedi=* | --localed=* | --locale=*) - localedir=$ac_optarg ;; - - -localstatedir | --localstatedir | --localstatedi | --localstated \ - | --localstate | --localstat | --localsta | --localst | --locals) - ac_prev=localstatedir ;; - -localstatedir=* | --localstatedir=* | --localstatedi=* | --localstated=* \ - | --localstate=* | --localstat=* | --localsta=* | --localst=* | --locals=*) - localstatedir=$ac_optarg ;; - - -mandir | --mandir | --mandi | --mand | --man | --ma | --m) - ac_prev=mandir ;; - -mandir=* | --mandir=* | --mandi=* | --mand=* | --man=* | --ma=* | --m=*) - mandir=$ac_optarg ;; - - -nfp | --nfp | --nf) - # Obsolete; use --without-fp. - with_fp=no ;; - - -no-create | --no-create | --no-creat | --no-crea | --no-cre \ - | --no-cr | --no-c | -n) - no_create=yes ;; - - -no-recursion | --no-recursion | --no-recursio | --no-recursi \ - | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r) - no_recursion=yes ;; - - -oldincludedir | --oldincludedir | --oldincludedi | --oldincluded \ - | --oldinclude | --oldinclud | --oldinclu | --oldincl | --oldinc \ - | --oldin | --oldi | --old | --ol | --o) - ac_prev=oldincludedir ;; - -oldincludedir=* | --oldincludedir=* | --oldincludedi=* | --oldincluded=* \ - | --oldinclude=* | --oldinclud=* | --oldinclu=* | --oldincl=* | --oldinc=* \ - | --oldin=* | --oldi=* | --old=* | --ol=* | --o=*) - oldincludedir=$ac_optarg ;; - - -prefix | --prefix | --prefi | --pref | --pre | --pr | --p) - ac_prev=prefix ;; - -prefix=* | --prefix=* | --prefi=* | --pref=* | --pre=* | --pr=* | --p=*) - prefix=$ac_optarg ;; - - -program-prefix | --program-prefix | --program-prefi | --program-pref \ - | --program-pre | --program-pr | --program-p) - ac_prev=program_prefix ;; - -program-prefix=* | --program-prefix=* | --program-prefi=* \ - | --program-pref=* | --program-pre=* | --program-pr=* | --program-p=*) - program_prefix=$ac_optarg ;; - - -program-suffix | --program-suffix | --program-suffi | --program-suff \ - | --program-suf | --program-su | --program-s) - ac_prev=program_suffix ;; - -program-suffix=* | --program-suffix=* | --program-suffi=* \ - | --program-suff=* | --program-suf=* | --program-su=* | --program-s=*) - program_suffix=$ac_optarg ;; - - -program-transform-name | --program-transform-name \ - | --program-transform-nam | --program-transform-na \ - | --program-transform-n | --program-transform- \ - | --program-transform | --program-transfor \ - | --program-transfo | --program-transf \ - | --program-trans | --program-tran \ - | --progr-tra | --program-tr | --program-t) - ac_prev=program_transform_name ;; - -program-transform-name=* | --program-transform-name=* \ - | --program-transform-nam=* | --program-transform-na=* \ - | --program-transform-n=* | --program-transform-=* \ - | --program-transform=* | --program-transfor=* \ - | --program-transfo=* | --program-transf=* \ - | --program-trans=* | --program-tran=* \ - | --progr-tra=* | --program-tr=* | --program-t=*) - program_transform_name=$ac_optarg ;; - - -pdfdir | --pdfdir | --pdfdi | --pdfd | --pdf | --pd) - ac_prev=pdfdir ;; - -pdfdir=* | --pdfdir=* | --pdfdi=* | --pdfd=* | --pdf=* | --pd=*) - pdfdir=$ac_optarg ;; - - -psdir | --psdir | --psdi | --psd | --ps) - ac_prev=psdir ;; - -psdir=* | --psdir=* | --psdi=* | --psd=* | --ps=*) - psdir=$ac_optarg ;; - - -q | -quiet | --quiet | --quie | --qui | --qu | --q \ - | -silent | --silent | --silen | --sile | --sil) - silent=yes ;; - - -sbindir | --sbindir | --sbindi | --sbind | --sbin | --sbi | --sb) - ac_prev=sbindir ;; - -sbindir=* | --sbindir=* | --sbindi=* | --sbind=* | --sbin=* \ - | --sbi=* | --sb=*) - sbindir=$ac_optarg ;; - - -sharedstatedir | --sharedstatedir | --sharedstatedi \ - | --sharedstated | --sharedstate | --sharedstat | --sharedsta \ - | --sharedst | --shareds | --shared | --share | --shar \ - | --sha | --sh) - ac_prev=sharedstatedir ;; - -sharedstatedir=* | --sharedstatedir=* | --sharedstatedi=* \ - | --sharedstated=* | --sharedstate=* | --sharedstat=* | --sharedsta=* \ - | --sharedst=* | --shareds=* | --shared=* | --share=* | --shar=* \ - | --sha=* | --sh=*) - sharedstatedir=$ac_optarg ;; - - -site | --site | --sit) - ac_prev=site ;; - -site=* | --site=* | --sit=*) - site=$ac_optarg ;; - - -srcdir | --srcdir | --srcdi | --srcd | --src | --sr) - ac_prev=srcdir ;; - -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*) - srcdir=$ac_optarg ;; - - -sysconfdir | --sysconfdir | --sysconfdi | --sysconfd | --sysconf \ - | --syscon | --sysco | --sysc | --sys | --sy) - ac_prev=sysconfdir ;; - -sysconfdir=* | --sysconfdir=* | --sysconfdi=* | --sysconfd=* | --sysconf=* \ - | --syscon=* | --sysco=* | --sysc=* | --sys=* | --sy=*) - sysconfdir=$ac_optarg ;; - - -target | --target | --targe | --targ | --tar | --ta | --t) - ac_prev=target_alias ;; - -target=* | --target=* | --targe=* | --targ=* | --tar=* | --ta=* | --t=*) - target_alias=$ac_optarg ;; - - -v | -verbose | --verbose | --verbos | --verbo | --verb) - verbose=yes ;; - - -version | --version | --versio | --versi | --vers | -V) - ac_init_version=: ;; - - -with-* | --with-*) - ac_useropt=`expr "x$ac_option" : 'x-*with-\([^=]*\)'` - # Reject names that are not valid shell variable names. - expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null && - as_fn_error "invalid package name: $ac_useropt" - ac_useropt_orig=$ac_useropt - ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'` - case $ac_user_opts in - *" -"with_$ac_useropt" -"*) ;; - *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--with-$ac_useropt_orig" - ac_unrecognized_sep=', ';; - esac - eval with_$ac_useropt=\$ac_optarg ;; - - -without-* | --without-*) - ac_useropt=`expr "x$ac_option" : 'x-*without-\(.*\)'` - # Reject names that are not valid shell variable names. - expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null && - as_fn_error "invalid package name: $ac_useropt" - ac_useropt_orig=$ac_useropt - ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'` - case $ac_user_opts in - *" -"with_$ac_useropt" -"*) ;; - *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--without-$ac_useropt_orig" - ac_unrecognized_sep=', ';; - esac - eval with_$ac_useropt=no ;; - - --x) - # Obsolete; use --with-x. - with_x=yes ;; - - -x-includes | --x-includes | --x-include | --x-includ | --x-inclu \ - | --x-incl | --x-inc | --x-in | --x-i) - ac_prev=x_includes ;; - -x-includes=* | --x-includes=* | --x-include=* | --x-includ=* | --x-inclu=* \ - | --x-incl=* | --x-inc=* | --x-in=* | --x-i=*) - x_includes=$ac_optarg ;; - - -x-libraries | --x-libraries | --x-librarie | --x-librari \ - | --x-librar | --x-libra | --x-libr | --x-lib | --x-li | --x-l) - ac_prev=x_libraries ;; - -x-libraries=* | --x-libraries=* | --x-librarie=* | --x-librari=* \ - | --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*) - x_libraries=$ac_optarg ;; - - -*) as_fn_error "unrecognized option: \`$ac_option' -Try \`$0 --help' for more information." - ;; - - *=*) - ac_envvar=`expr "x$ac_option" : 'x\([^=]*\)='` - # Reject names that are not valid shell variable names. - case $ac_envvar in #( - '' | [0-9]* | *[!_$as_cr_alnum]* ) - as_fn_error "invalid variable name: \`$ac_envvar'" ;; - esac - eval $ac_envvar=\$ac_optarg - export $ac_envvar ;; - - *) - # FIXME: should be removed in autoconf 3.0. - $as_echo "$as_me: WARNING: you should use --build, --host, --target" >&2 - expr "x$ac_option" : ".*[^-._$as_cr_alnum]" >/dev/null && - $as_echo "$as_me: WARNING: invalid host type: $ac_option" >&2 - : ${build_alias=$ac_option} ${host_alias=$ac_option} ${target_alias=$ac_option} - ;; - - esac -done - -if test -n "$ac_prev"; then - ac_option=--`echo $ac_prev | sed 's/_/-/g'` - as_fn_error "missing argument to $ac_option" -fi - -if test -n "$ac_unrecognized_opts"; then - case $enable_option_checking in - no) ;; - fatal) as_fn_error "unrecognized options: $ac_unrecognized_opts" ;; - *) $as_echo "$as_me: WARNING: unrecognized options: $ac_unrecognized_opts" >&2 ;; - esac -fi - -# Check all directory arguments for consistency. -for ac_var in exec_prefix prefix bindir sbindir libexecdir datarootdir \ - datadir sysconfdir sharedstatedir localstatedir includedir \ - oldincludedir docdir infodir htmldir dvidir pdfdir psdir \ - libdir localedir mandir -do - eval ac_val=\$$ac_var - # Remove trailing slashes. - case $ac_val in - */ ) - ac_val=`expr "X$ac_val" : 'X\(.*[^/]\)' \| "X$ac_val" : 'X\(.*\)'` - eval $ac_var=\$ac_val;; - esac - # Be sure to have absolute directory names. - case $ac_val in - [\\/$]* | ?:[\\/]* ) continue;; - NONE | '' ) case $ac_var in *prefix ) continue;; esac;; - esac - as_fn_error "expected an absolute directory name for --$ac_var: $ac_val" -done - -# There might be people who depend on the old broken behavior: `$host' -# used to hold the argument of --host etc. -# FIXME: To remove some day. -build=$build_alias -host=$host_alias -target=$target_alias - -# FIXME: To remove some day. -if test "x$host_alias" != x; then - if test "x$build_alias" = x; then - cross_compiling=maybe - $as_echo "$as_me: WARNING: If you wanted to set the --build type, don't use --host. - If a cross compiler is detected then cross compile mode will be used." >&2 - elif test "x$build_alias" != "x$host_alias"; then - cross_compiling=yes - fi -fi - -ac_tool_prefix= -test -n "$host_alias" && ac_tool_prefix=$host_alias- - -test "$silent" = yes && exec 6>/dev/null - - -ac_pwd=`pwd` && test -n "$ac_pwd" && -ac_ls_di=`ls -di .` && -ac_pwd_ls_di=`cd "$ac_pwd" && ls -di .` || - as_fn_error "working directory cannot be determined" -test "X$ac_ls_di" = "X$ac_pwd_ls_di" || - as_fn_error "pwd does not report name of working directory" - - -# Find the source files, if location was not specified. -if test -z "$srcdir"; then - ac_srcdir_defaulted=yes - # Try the directory containing this script, then the parent directory. - ac_confdir=`$as_dirname -- "$as_myself" || -$as_expr X"$as_myself" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ - X"$as_myself" : 'X\(//\)[^/]' \| \ - X"$as_myself" : 'X\(//\)$' \| \ - X"$as_myself" : 'X\(/\)' \| . 2>/dev/null || -$as_echo X"$as_myself" | - sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ - s//\1/ - q - } - /^X\(\/\/\)[^/].*/{ - s//\1/ - q - } - /^X\(\/\/\)$/{ - s//\1/ - q - } - /^X\(\/\).*/{ - s//\1/ - q - } - s/.*/./; q'` - srcdir=$ac_confdir - if test ! -r "$srcdir/$ac_unique_file"; then - srcdir=.. - fi -else - ac_srcdir_defaulted=no -fi -if test ! -r "$srcdir/$ac_unique_file"; then - test "$ac_srcdir_defaulted" = yes && srcdir="$ac_confdir or .." - as_fn_error "cannot find sources ($ac_unique_file) in $srcdir" -fi -ac_msg="sources are in $srcdir, but \`cd $srcdir' does not work" -ac_abs_confdir=`( - cd "$srcdir" && test -r "./$ac_unique_file" || as_fn_error "$ac_msg" - pwd)` -# When building in place, set srcdir=. -if test "$ac_abs_confdir" = "$ac_pwd"; then - srcdir=. -fi -# Remove unnecessary trailing slashes from srcdir. -# Double slashes in file names in object file debugging info -# mess up M-x gdb in Emacs. -case $srcdir in -*/) srcdir=`expr "X$srcdir" : 'X\(.*[^/]\)' \| "X$srcdir" : 'X\(.*\)'`;; -esac -for ac_var in $ac_precious_vars; do - eval ac_env_${ac_var}_set=\${${ac_var}+set} - eval ac_env_${ac_var}_value=\$${ac_var} - eval ac_cv_env_${ac_var}_set=\${${ac_var}+set} - eval ac_cv_env_${ac_var}_value=\$${ac_var} -done - -# -# Report the --help message. -# -if test "$ac_init_help" = "long"; then - # Omit some internal or obsolete options to make the list less imposing. - # This message is too long to be a string in the A/UX 3.1 sh. - cat <<_ACEOF -\`configure' configures pixman 0.18.2 to adapt to many kinds of systems. - -Usage: $0 [OPTION]... [VAR=VALUE]... - -To assign environment variables (e.g., CC, CFLAGS...), specify them as -VAR=VALUE. See below for descriptions of some of the useful variables. - -Defaults for the options are specified in brackets. - -Configuration: - -h, --help display this help and exit - --help=short display options specific to this package - --help=recursive display the short help of all the included packages - -V, --version display version information and exit - -q, --quiet, --silent do not print \`checking...' messages - --cache-file=FILE cache test results in FILE [disabled] - -C, --config-cache alias for \`--cache-file=config.cache' - -n, --no-create do not create output files - --srcdir=DIR find the sources in DIR [configure dir or \`..'] - -Installation directories: - --prefix=PREFIX install architecture-independent files in PREFIX - [$ac_default_prefix] - --exec-prefix=EPREFIX install architecture-dependent files in EPREFIX - [PREFIX] - -By default, \`make install' will install all the files in -\`$ac_default_prefix/bin', \`$ac_default_prefix/lib' etc. You can specify -an installation prefix other than \`$ac_default_prefix' using \`--prefix', -for instance \`--prefix=\$HOME'. - -For better control, use the options below. - -Fine tuning of the installation directories: - --bindir=DIR user executables [EPREFIX/bin] - --sbindir=DIR system admin executables [EPREFIX/sbin] - --libexecdir=DIR program executables [EPREFIX/libexec] - --sysconfdir=DIR read-only single-machine data [PREFIX/etc] - --sharedstatedir=DIR modifiable architecture-independent data [PREFIX/com] - --localstatedir=DIR modifiable single-machine data [PREFIX/var] - --libdir=DIR object code libraries [EPREFIX/lib] - --includedir=DIR C header files [PREFIX/include] - --oldincludedir=DIR C header files for non-gcc [/usr/include] - --datarootdir=DIR read-only arch.-independent data root [PREFIX/share] - --datadir=DIR read-only architecture-independent data [DATAROOTDIR] - --infodir=DIR info documentation [DATAROOTDIR/info] - --localedir=DIR locale-dependent data [DATAROOTDIR/locale] - --mandir=DIR man documentation [DATAROOTDIR/man] - --docdir=DIR documentation root [DATAROOTDIR/doc/pixman] - --htmldir=DIR html documentation [DOCDIR] - --dvidir=DIR dvi documentation [DOCDIR] - --pdfdir=DIR pdf documentation [DOCDIR] - --psdir=DIR ps documentation [DOCDIR] -_ACEOF - - cat <<\_ACEOF - -Program names: - --program-prefix=PREFIX prepend PREFIX to installed program names - --program-suffix=SUFFIX append SUFFIX to installed program names - --program-transform-name=PROGRAM run sed PROGRAM on installed program names - -System types: - --build=BUILD configure for building on BUILD [guessed] - --host=HOST cross-compile to build programs to run on HOST [BUILD] -_ACEOF -fi - -if test -n "$ac_init_help"; then - case $ac_init_help in - short | recursive ) echo "Configuration of pixman 0.18.2:";; - esac - cat <<\_ACEOF - -Optional Features: - --disable-option-checking ignore unrecognized --enable/--with options - --disable-FEATURE do not include FEATURE (same as --enable-FEATURE=no) - --enable-FEATURE[=ARG] include FEATURE [ARG=yes] - --enable-silent-rules less verbose build output (undo: `make V=1') - --disable-silent-rules verbose build output (undo: `make V=0') - --disable-dependency-tracking speeds up one-time build - --enable-dependency-tracking do not reject slow dependency extractors - --enable-shared[=PKGS] build shared libraries [default=yes] - --enable-static[=PKGS] build static libraries [default=yes] - --enable-fast-install[=PKGS] - optimize for fast installation [default=yes] - --disable-libtool-lock avoid locking (might break parallel builds) - --disable-mmx disable MMX fast paths - --disable-sse2 disable SSE2 fast paths - --disable-vmx disable VMX fast paths - --disable-arm-simd disable ARM SIMD fast paths - --disable-arm-neon disable ARM NEON fast paths - --disable-gcc-inline-asm - disable GNU-style inline assembler - --enable-timers enable TIMER_BEGIN and TIMER_END macros [default=no] - --enable-gtk enable tests using GTK+ [default=auto] - -Optional Packages: - --with-PACKAGE[=ARG] use PACKAGE [ARG=yes] - --without-PACKAGE do not use PACKAGE (same as --with-PACKAGE=no) - --with-pic try to use only PIC/non-PIC objects [default=use - both] - --with-gnu-ld assume the C compiler uses GNU ld [default=no] - -Some influential environment variables: - CC C compiler command - CFLAGS C compiler flags - LDFLAGS linker flags, e.g. -L<lib dir> if you have libraries in a - nonstandard directory <lib dir> - LIBS libraries to pass to the linker, e.g. -l<library> - CPPFLAGS (Objective) C/C++ preprocessor flags, e.g. -I<include dir> if - you have headers in a nonstandard directory <include dir> - CCAS assembler compiler command (defaults to CC) - CCASFLAGS assembler compiler flags (defaults to CFLAGS) - CPP C preprocessor - PKG_CONFIG path to pkg-config utility - GTK_CFLAGS C compiler flags for GTK, overriding pkg-config - GTK_LIBS linker flags for GTK, overriding pkg-config - -Use these variables to override the choices made by `configure' or to help -it to find libraries and programs with nonstandard names/locations. - -Report bugs to <"pixman@lists.freedesktop.org">. -_ACEOF -ac_status=$? -fi - -if test "$ac_init_help" = "recursive"; then - # If there are subdirs, report their specific --help. - for ac_dir in : $ac_subdirs_all; do test "x$ac_dir" = x: && continue - test -d "$ac_dir" || - { cd "$srcdir" && ac_pwd=`pwd` && srcdir=. && test -d "$ac_dir"; } || - continue - ac_builddir=. - -case "$ac_dir" in -.) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;; -*) - ac_dir_suffix=/`$as_echo "$ac_dir" | sed 's|^\.[\\/]||'` - # A ".." for each directory in $ac_dir_suffix. - ac_top_builddir_sub=`$as_echo "$ac_dir_suffix" | sed 's|/[^\\/]*|/..|g;s|/||'` - case $ac_top_builddir_sub in - "") ac_top_builddir_sub=. ac_top_build_prefix= ;; - *) ac_top_build_prefix=$ac_top_builddir_sub/ ;; - esac ;; -esac -ac_abs_top_builddir=$ac_pwd -ac_abs_builddir=$ac_pwd$ac_dir_suffix -# for backward compatibility: -ac_top_builddir=$ac_top_build_prefix - -case $srcdir in - .) # We are building in place. - ac_srcdir=. - ac_top_srcdir=$ac_top_builddir_sub - ac_abs_top_srcdir=$ac_pwd ;; - [\\/]* | ?:[\\/]* ) # Absolute name. - ac_srcdir=$srcdir$ac_dir_suffix; - ac_top_srcdir=$srcdir - ac_abs_top_srcdir=$srcdir ;; - *) # Relative name. - ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix - ac_top_srcdir=$ac_top_build_prefix$srcdir - ac_abs_top_srcdir=$ac_pwd/$srcdir ;; -esac -ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix - - cd "$ac_dir" || { ac_status=$?; continue; } - # Check for guested configure. - if test -f "$ac_srcdir/configure.gnu"; then - echo && - $SHELL "$ac_srcdir/configure.gnu" --help=recursive - elif test -f "$ac_srcdir/configure"; then - echo && - $SHELL "$ac_srcdir/configure" --help=recursive - else - $as_echo "$as_me: WARNING: no configuration information is in $ac_dir" >&2 - fi || ac_status=$? - cd "$ac_pwd" || { ac_status=$?; break; } - done -fi - -test -n "$ac_init_help" && exit $ac_status -if $ac_init_version; then - cat <<\_ACEOF -pixman configure 0.18.2 -generated by GNU Autoconf 2.65 - -Copyright (C) 2009 Free Software Foundation, Inc. -This configure script is free software; the Free Software Foundation -gives unlimited permission to copy, distribute and modify it. -_ACEOF - exit -fi - -## ------------------------ ## -## Autoconf initialization. ## -## ------------------------ ## - -# ac_fn_c_try_compile LINENO -# -------------------------- -# Try to compile conftest.$ac_ext, and return whether this succeeded. -ac_fn_c_try_compile () -{ - as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack - rm -f conftest.$ac_objext - if { { ac_try="$ac_compile" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" -$as_echo "$ac_try_echo"; } >&5 - (eval "$ac_compile") 2>conftest.err - ac_status=$? - if test -s conftest.err; then - grep -v '^ *+' conftest.err >conftest.er1 - cat conftest.er1 >&5 - mv -f conftest.er1 conftest.err - fi - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest.$ac_objext; then : - ac_retval=0 -else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - ac_retval=1 -fi - eval $as_lineno_stack; test "x$as_lineno_stack" = x && { as_lineno=; unset as_lineno;} - as_fn_set_status $ac_retval - -} # ac_fn_c_try_compile - -# ac_fn_c_try_link LINENO -# ----------------------- -# Try to link conftest.$ac_ext, and return whether this succeeded. -ac_fn_c_try_link () -{ - as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack - rm -f conftest.$ac_objext conftest$ac_exeext - if { { ac_try="$ac_link" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" -$as_echo "$ac_try_echo"; } >&5 - (eval "$ac_link") 2>conftest.err - ac_status=$? - if test -s conftest.err; then - grep -v '^ *+' conftest.err >conftest.er1 - cat conftest.er1 >&5 - mv -f conftest.er1 conftest.err - fi - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest$ac_exeext && { - test "$cross_compiling" = yes || - $as_test_x conftest$ac_exeext - }; then : - ac_retval=0 -else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - ac_retval=1 -fi - # Delete the IPA/IPO (Inter Procedural Analysis/Optimization) information - # created by the PGI compiler (conftest_ipa8_conftest.oo), as it would - # interfere with the next link command; also delete a directory that is - # left behind by Apple's compiler. We do this before executing the actions. - rm -rf conftest.dSYM conftest_ipa8_conftest.oo - eval $as_lineno_stack; test "x$as_lineno_stack" = x && { as_lineno=; unset as_lineno;} - as_fn_set_status $ac_retval - -} # ac_fn_c_try_link - -# ac_fn_c_check_header_compile LINENO HEADER VAR INCLUDES -# ------------------------------------------------------- -# Tests whether HEADER exists and can be compiled using the include files in -# INCLUDES, setting the cache variable VAR accordingly. -ac_fn_c_check_header_compile () -{ - as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack - { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5 -$as_echo_n "checking for $2... " >&6; } -if { as_var=$3; eval "test \"\${$as_var+set}\" = set"; }; then : - $as_echo_n "(cached) " >&6 -else - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -$4 -#include <$2> -_ACEOF -if ac_fn_c_try_compile "$LINENO"; then : - eval "$3=yes" -else - eval "$3=no" -fi -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext -fi -eval ac_res=\$$3 - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5 -$as_echo "$ac_res" >&6; } - eval $as_lineno_stack; test "x$as_lineno_stack" = x && { as_lineno=; unset as_lineno;} - -} # ac_fn_c_check_header_compile - -# ac_fn_c_try_cpp LINENO -# ---------------------- -# Try to preprocess conftest.$ac_ext, and return whether this succeeded. -ac_fn_c_try_cpp () -{ - as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack - if { { ac_try="$ac_cpp conftest.$ac_ext" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" -$as_echo "$ac_try_echo"; } >&5 - (eval "$ac_cpp conftest.$ac_ext") 2>conftest.err - ac_status=$? - if test -s conftest.err; then - grep -v '^ *+' conftest.err >conftest.er1 - cat conftest.er1 >&5 - mv -f conftest.er1 conftest.err - fi - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; } >/dev/null && { - test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" || - test ! -s conftest.err - }; then : - ac_retval=0 -else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - ac_retval=1 -fi - eval $as_lineno_stack; test "x$as_lineno_stack" = x && { as_lineno=; unset as_lineno;} - as_fn_set_status $ac_retval - -} # ac_fn_c_try_cpp - -# ac_fn_c_try_run LINENO -# ---------------------- -# Try to link conftest.$ac_ext, and return whether this succeeded. Assumes -# that executables *can* be run. -ac_fn_c_try_run () -{ - as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack - if { { ac_try="$ac_link" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" -$as_echo "$ac_try_echo"; } >&5 - (eval "$ac_link") 2>&5 - ac_status=$? - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; } && { ac_try='./conftest$ac_exeext' - { { case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" -$as_echo "$ac_try_echo"; } >&5 - (eval "$ac_try") 2>&5 - ac_status=$? - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; }; }; then : - ac_retval=0 -else - $as_echo "$as_me: program exited with status $ac_status" >&5 - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - ac_retval=$ac_status -fi - rm -rf conftest.dSYM conftest_ipa8_conftest.oo - eval $as_lineno_stack; test "x$as_lineno_stack" = x && { as_lineno=; unset as_lineno;} - as_fn_set_status $ac_retval - -} # ac_fn_c_try_run - -# ac_fn_c_check_func LINENO FUNC VAR -# ---------------------------------- -# Tests whether FUNC exists, setting the cache variable VAR accordingly -ac_fn_c_check_func () -{ - as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack - { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5 -$as_echo_n "checking for $2... " >&6; } -if { as_var=$3; eval "test \"\${$as_var+set}\" = set"; }; then : - $as_echo_n "(cached) " >&6 -else - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -/* Define $2 to an innocuous variant, in case <limits.h> declares $2. - For example, HP-UX 11i <limits.h> declares gettimeofday. */ -#define $2 innocuous_$2 - -/* System header to define __stub macros and hopefully few prototypes, - which can conflict with char $2 (); below. - Prefer <limits.h> to <assert.h> if __STDC__ is defined, since - <limits.h> exists even on freestanding compilers. */ - -#ifdef __STDC__ -# include <limits.h> -#else -# include <assert.h> -#endif - -#undef $2 - -/* Override any GCC internal prototype to avoid an error. - Use char because int might match the return type of a GCC - builtin and then its argument prototype would still apply. */ -#ifdef __cplusplus -extern "C" -#endif -char $2 (); -/* The GNU C library defines this for functions which it implements - to always fail with ENOSYS. Some functions are actually named - something starting with __ and the normal name is an alias. */ -#if defined __stub_$2 || defined __stub___$2 -choke me -#endif - -int -main () -{ -return $2 (); - ; - return 0; -} -_ACEOF -if ac_fn_c_try_link "$LINENO"; then : - eval "$3=yes" -else - eval "$3=no" -fi -rm -f core conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext -fi -eval ac_res=\$$3 - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5 -$as_echo "$ac_res" >&6; } - eval $as_lineno_stack; test "x$as_lineno_stack" = x && { as_lineno=; unset as_lineno;} - -} # ac_fn_c_check_func - -# ac_fn_c_compute_int LINENO EXPR VAR INCLUDES -# -------------------------------------------- -# Tries to find the compile-time value of EXPR in a program that includes -# INCLUDES, setting VAR accordingly. Returns whether the value could be -# computed -ac_fn_c_compute_int () -{ - as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack - if test "$cross_compiling" = yes; then - # Depending upon the size, compute the lo and hi bounds. -cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -$4 -int -main () -{ -static int test_array [1 - 2 * !(($2) >= 0)]; -test_array [0] = 0 - - ; - return 0; -} -_ACEOF -if ac_fn_c_try_compile "$LINENO"; then : - ac_lo=0 ac_mid=0 - while :; do - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -$4 -int -main () -{ -static int test_array [1 - 2 * !(($2) <= $ac_mid)]; -test_array [0] = 0 - - ; - return 0; -} -_ACEOF -if ac_fn_c_try_compile "$LINENO"; then : - ac_hi=$ac_mid; break -else - as_fn_arith $ac_mid + 1 && ac_lo=$as_val - if test $ac_lo -le $ac_mid; then - ac_lo= ac_hi= - break - fi - as_fn_arith 2 '*' $ac_mid + 1 && ac_mid=$as_val -fi -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext - done -else - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -$4 -int -main () -{ -static int test_array [1 - 2 * !(($2) < 0)]; -test_array [0] = 0 - - ; - return 0; -} -_ACEOF -if ac_fn_c_try_compile "$LINENO"; then : - ac_hi=-1 ac_mid=-1 - while :; do - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -$4 -int -main () -{ -static int test_array [1 - 2 * !(($2) >= $ac_mid)]; -test_array [0] = 0 - - ; - return 0; -} -_ACEOF -if ac_fn_c_try_compile "$LINENO"; then : - ac_lo=$ac_mid; break -else - as_fn_arith '(' $ac_mid ')' - 1 && ac_hi=$as_val - if test $ac_mid -le $ac_hi; then - ac_lo= ac_hi= - break - fi - as_fn_arith 2 '*' $ac_mid && ac_mid=$as_val -fi -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext - done -else - ac_lo= ac_hi= -fi -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext -fi -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext -# Binary search between lo and hi bounds. -while test "x$ac_lo" != "x$ac_hi"; do - as_fn_arith '(' $ac_hi - $ac_lo ')' / 2 + $ac_lo && ac_mid=$as_val - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -$4 -int -main () -{ -static int test_array [1 - 2 * !(($2) <= $ac_mid)]; -test_array [0] = 0 - - ; - return 0; -} -_ACEOF -if ac_fn_c_try_compile "$LINENO"; then : - ac_hi=$ac_mid -else - as_fn_arith '(' $ac_mid ')' + 1 && ac_lo=$as_val -fi -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext -done -case $ac_lo in #(( -?*) eval "$3=\$ac_lo"; ac_retval=0 ;; -'') ac_retval=1 ;; -esac - else - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -$4 -static long int longval () { return $2; } -static unsigned long int ulongval () { return $2; } -#include <stdio.h> -#include <stdlib.h> -int -main () -{ - - FILE *f = fopen ("conftest.val", "w"); - if (! f) - return 1; - if (($2) < 0) - { - long int i = longval (); - if (i != ($2)) - return 1; - fprintf (f, "%ld", i); - } - else - { - unsigned long int i = ulongval (); - if (i != ($2)) - return 1; - fprintf (f, "%lu", i); - } - /* Do not output a trailing newline, as this causes \r\n confusion - on some platforms. */ - return ferror (f) || fclose (f) != 0; - - ; - return 0; -} -_ACEOF -if ac_fn_c_try_run "$LINENO"; then : - echo >>conftest.val; read $3 <conftest.val; ac_retval=0 -else - ac_retval=1 -fi -rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \ - conftest.$ac_objext conftest.beam conftest.$ac_ext -rm -f conftest.val - - fi - eval $as_lineno_stack; test "x$as_lineno_stack" = x && { as_lineno=; unset as_lineno;} - as_fn_set_status $ac_retval - -} # ac_fn_c_compute_int - -# ac_fn_c_check_decl LINENO SYMBOL VAR -# ------------------------------------ -# Tests whether SYMBOL is declared, setting cache variable VAR accordingly. -ac_fn_c_check_decl () -{ - as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack - { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $2 is declared" >&5 -$as_echo_n "checking whether $2 is declared... " >&6; } -if { as_var=$3; eval "test \"\${$as_var+set}\" = set"; }; then : - $as_echo_n "(cached) " >&6 -else - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -$4 -int -main () -{ -#ifndef $2 - (void) $2; -#endif - - ; - return 0; -} -_ACEOF -if ac_fn_c_try_compile "$LINENO"; then : - eval "$3=yes" -else - eval "$3=no" -fi -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext -fi -eval ac_res=\$$3 - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5 -$as_echo "$ac_res" >&6; } - eval $as_lineno_stack; test "x$as_lineno_stack" = x && { as_lineno=; unset as_lineno;} - -} # ac_fn_c_check_decl -cat >config.log <<_ACEOF -This file contains any messages produced by compilers while -running configure, to aid debugging if configure makes a mistake. - -It was created by pixman $as_me 0.18.2, which was -generated by GNU Autoconf 2.65. Invocation command line was - - $ $0 $@ - -_ACEOF -exec 5>>config.log -{ -cat <<_ASUNAME -## --------- ## -## Platform. ## -## --------- ## - -hostname = `(hostname || uname -n) 2>/dev/null | sed 1q` -uname -m = `(uname -m) 2>/dev/null || echo unknown` -uname -r = `(uname -r) 2>/dev/null || echo unknown` -uname -s = `(uname -s) 2>/dev/null || echo unknown` -uname -v = `(uname -v) 2>/dev/null || echo unknown` - -/usr/bin/uname -p = `(/usr/bin/uname -p) 2>/dev/null || echo unknown` -/bin/uname -X = `(/bin/uname -X) 2>/dev/null || echo unknown` - -/bin/arch = `(/bin/arch) 2>/dev/null || echo unknown` -/usr/bin/arch -k = `(/usr/bin/arch -k) 2>/dev/null || echo unknown` -/usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null || echo unknown` -/usr/bin/hostinfo = `(/usr/bin/hostinfo) 2>/dev/null || echo unknown` -/bin/machine = `(/bin/machine) 2>/dev/null || echo unknown` -/usr/bin/oslevel = `(/usr/bin/oslevel) 2>/dev/null || echo unknown` -/bin/universe = `(/bin/universe) 2>/dev/null || echo unknown` - -_ASUNAME - -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - $as_echo "PATH: $as_dir" - done -IFS=$as_save_IFS - -} >&5 - -cat >&5 <<_ACEOF - - -## ----------- ## -## Core tests. ## -## ----------- ## - -_ACEOF - - -# Keep a trace of the command line. -# Strip out --no-create and --no-recursion so they do not pile up. -# Strip out --silent because we don't want to record it for future runs. -# Also quote any args containing shell meta-characters. -# Make two passes to allow for proper duplicate-argument suppression. -ac_configure_args= -ac_configure_args0= -ac_configure_args1= -ac_must_keep_next=false -for ac_pass in 1 2 -do - for ac_arg - do - case $ac_arg in - -no-create | --no-c* | -n | -no-recursion | --no-r*) continue ;; - -q | -quiet | --quiet | --quie | --qui | --qu | --q \ - | -silent | --silent | --silen | --sile | --sil) - continue ;; - *\'*) - ac_arg=`$as_echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;; - esac - case $ac_pass in - 1) as_fn_append ac_configure_args0 " '$ac_arg'" ;; - 2) - as_fn_append ac_configure_args1 " '$ac_arg'" - if test $ac_must_keep_next = true; then - ac_must_keep_next=false # Got value, back to normal. - else - case $ac_arg in - *=* | --config-cache | -C | -disable-* | --disable-* \ - | -enable-* | --enable-* | -gas | --g* | -nfp | --nf* \ - | -q | -quiet | --q* | -silent | --sil* | -v | -verb* \ - | -with-* | --with-* | -without-* | --without-* | --x) - case "$ac_configure_args0 " in - "$ac_configure_args1"*" '$ac_arg' "* ) continue ;; - esac - ;; - -* ) ac_must_keep_next=true ;; - esac - fi - as_fn_append ac_configure_args " '$ac_arg'" - ;; - esac - done -done -{ ac_configure_args0=; unset ac_configure_args0;} -{ ac_configure_args1=; unset ac_configure_args1;} - -# When interrupted or exit'd, cleanup temporary files, and complete -# config.log. We remove comments because anyway the quotes in there -# would cause problems or look ugly. -# WARNING: Use '\'' to represent an apostrophe within the trap. -# WARNING: Do not start the trap code with a newline, due to a FreeBSD 4.0 bug. -trap 'exit_status=$? - # Save into config.log some information that might help in debugging. - { - echo - - cat <<\_ASBOX -## ---------------- ## -## Cache variables. ## -## ---------------- ## -_ASBOX - echo - # The following way of writing the cache mishandles newlines in values, -( - for ac_var in `(set) 2>&1 | sed -n '\''s/^\([a-zA-Z_][a-zA-Z0-9_]*\)=.*/\1/p'\''`; do - eval ac_val=\$$ac_var - case $ac_val in #( - *${as_nl}*) - case $ac_var in #( - *_cv_*) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: cache variable $ac_var contains a newline" >&5 -$as_echo "$as_me: WARNING: cache variable $ac_var contains a newline" >&2;} ;; - esac - case $ac_var in #( - _ | IFS | as_nl) ;; #( - BASH_ARGV | BASH_SOURCE) eval $ac_var= ;; #( - *) { eval $ac_var=; unset $ac_var;} ;; - esac ;; - esac - done - (set) 2>&1 | - case $as_nl`(ac_space='\'' '\''; set) 2>&1` in #( - *${as_nl}ac_space=\ *) - sed -n \ - "s/'\''/'\''\\\\'\'''\''/g; - s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\''\\2'\''/p" - ;; #( - *) - sed -n "/^[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*=/p" - ;; - esac | - sort -) - echo - - cat <<\_ASBOX -## ----------------- ## -## Output variables. ## -## ----------------- ## -_ASBOX - echo - for ac_var in $ac_subst_vars - do - eval ac_val=\$$ac_var - case $ac_val in - *\'\''*) ac_val=`$as_echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;; - esac - $as_echo "$ac_var='\''$ac_val'\''" - done | sort - echo - - if test -n "$ac_subst_files"; then - cat <<\_ASBOX -## ------------------- ## -## File substitutions. ## -## ------------------- ## -_ASBOX - echo - for ac_var in $ac_subst_files - do - eval ac_val=\$$ac_var - case $ac_val in - *\'\''*) ac_val=`$as_echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;; - esac - $as_echo "$ac_var='\''$ac_val'\''" - done | sort - echo - fi - - if test -s confdefs.h; then - cat <<\_ASBOX -## ----------- ## -## confdefs.h. ## -## ----------- ## -_ASBOX - echo - cat confdefs.h - echo - fi - test "$ac_signal" != 0 && - $as_echo "$as_me: caught signal $ac_signal" - $as_echo "$as_me: exit $exit_status" - } >&5 - rm -f core *.core core.conftest.* && - rm -f -r conftest* confdefs* conf$$* $ac_clean_files && - exit $exit_status -' 0 -for ac_signal in 1 2 13 15; do - trap 'ac_signal='$ac_signal'; as_fn_exit 1' $ac_signal -done -ac_signal=0 - -# confdefs.h avoids OS command line length limits that DEFS can exceed. -rm -f -r conftest* confdefs.h - -$as_echo "/* confdefs.h */" > confdefs.h - -# Predefined preprocessor variables. - -cat >>confdefs.h <<_ACEOF -#define PACKAGE_NAME "$PACKAGE_NAME" -_ACEOF - -cat >>confdefs.h <<_ACEOF -#define PACKAGE_TARNAME "$PACKAGE_TARNAME" -_ACEOF - -cat >>confdefs.h <<_ACEOF -#define PACKAGE_VERSION "$PACKAGE_VERSION" -_ACEOF - -cat >>confdefs.h <<_ACEOF -#define PACKAGE_STRING "$PACKAGE_STRING" -_ACEOF - -cat >>confdefs.h <<_ACEOF -#define PACKAGE_BUGREPORT "$PACKAGE_BUGREPORT" -_ACEOF - -cat >>confdefs.h <<_ACEOF -#define PACKAGE_URL "$PACKAGE_URL" -_ACEOF - - -# Let the site file select an alternate cache file if it wants to. -# Prefer an explicitly selected file to automatically selected ones. -ac_site_file1=NONE -ac_site_file2=NONE -if test -n "$CONFIG_SITE"; then - ac_site_file1=$CONFIG_SITE -elif test "x$prefix" != xNONE; then - ac_site_file1=$prefix/share/config.site - ac_site_file2=$prefix/etc/config.site -else - ac_site_file1=$ac_default_prefix/share/config.site - ac_site_file2=$ac_default_prefix/etc/config.site -fi -for ac_site_file in "$ac_site_file1" "$ac_site_file2" -do - test "x$ac_site_file" = xNONE && continue - if test /dev/null != "$ac_site_file" && test -r "$ac_site_file"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: loading site script $ac_site_file" >&5 -$as_echo "$as_me: loading site script $ac_site_file" >&6;} - sed 's/^/| /' "$ac_site_file" >&5 - . "$ac_site_file" - fi -done - -if test -r "$cache_file"; then - # Some versions of bash will fail to source /dev/null (special files - # actually), so we avoid doing that. DJGPP emulates it as a regular file. - if test /dev/null != "$cache_file" && test -f "$cache_file"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: loading cache $cache_file" >&5 -$as_echo "$as_me: loading cache $cache_file" >&6;} - case $cache_file in - [\\/]* | ?:[\\/]* ) . "$cache_file";; - *) . "./$cache_file";; - esac - fi -else - { $as_echo "$as_me:${as_lineno-$LINENO}: creating cache $cache_file" >&5 -$as_echo "$as_me: creating cache $cache_file" >&6;} - >$cache_file -fi - -# Check that the precious variables saved in the cache have kept the same -# value. -ac_cache_corrupted=false -for ac_var in $ac_precious_vars; do - eval ac_old_set=\$ac_cv_env_${ac_var}_set - eval ac_new_set=\$ac_env_${ac_var}_set - eval ac_old_val=\$ac_cv_env_${ac_var}_value - eval ac_new_val=\$ac_env_${ac_var}_value - case $ac_old_set,$ac_new_set in - set,) - { $as_echo "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&5 -$as_echo "$as_me: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&2;} - ac_cache_corrupted=: ;; - ,set) - { $as_echo "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' was not set in the previous run" >&5 -$as_echo "$as_me: error: \`$ac_var' was not set in the previous run" >&2;} - ac_cache_corrupted=: ;; - ,);; - *) - if test "x$ac_old_val" != "x$ac_new_val"; then - # differences in whitespace do not lead to failure. - ac_old_val_w=`echo x $ac_old_val` - ac_new_val_w=`echo x $ac_new_val` - if test "$ac_old_val_w" != "$ac_new_val_w"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' has changed since the previous run:" >&5 -$as_echo "$as_me: error: \`$ac_var' has changed since the previous run:" >&2;} - ac_cache_corrupted=: - else - { $as_echo "$as_me:${as_lineno-$LINENO}: warning: ignoring whitespace changes in \`$ac_var' since the previous run:" >&5 -$as_echo "$as_me: warning: ignoring whitespace changes in \`$ac_var' since the previous run:" >&2;} - eval $ac_var=\$ac_old_val - fi - { $as_echo "$as_me:${as_lineno-$LINENO}: former value: \`$ac_old_val'" >&5 -$as_echo "$as_me: former value: \`$ac_old_val'" >&2;} - { $as_echo "$as_me:${as_lineno-$LINENO}: current value: \`$ac_new_val'" >&5 -$as_echo "$as_me: current value: \`$ac_new_val'" >&2;} - fi;; - esac - # Pass precious variables to config.status. - if test "$ac_new_set" = set; then - case $ac_new_val in - *\'*) ac_arg=$ac_var=`$as_echo "$ac_new_val" | sed "s/'/'\\\\\\\\''/g"` ;; - *) ac_arg=$ac_var=$ac_new_val ;; - esac - case " $ac_configure_args " in - *" '$ac_arg' "*) ;; # Avoid dups. Use of quotes ensures accuracy. - *) as_fn_append ac_configure_args " '$ac_arg'" ;; - esac - fi -done -if $ac_cache_corrupted; then - { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 -$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} - { $as_echo "$as_me:${as_lineno-$LINENO}: error: changes in the environment can compromise the build" >&5 -$as_echo "$as_me: error: changes in the environment can compromise the build" >&2;} - as_fn_error "run \`make distclean' and/or \`rm $cache_file' and start over" "$LINENO" 5 -fi -## -------------------- ## -## Main body of script. ## -## -------------------- ## - -ac_ext=c -ac_cpp='$CPP $CPPFLAGS' -ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' -ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_c_compiler_gnu - - -am__api_version='1.11' - -ac_aux_dir= -for ac_dir in "$srcdir" "$srcdir/.." "$srcdir/../.."; do - for ac_t in install-sh install.sh shtool; do - if test -f "$ac_dir/$ac_t"; then - ac_aux_dir=$ac_dir - ac_install_sh="$ac_aux_dir/$ac_t -c" - break 2 - fi - done -done -if test -z "$ac_aux_dir"; then - as_fn_error "cannot find install-sh, install.sh, or shtool in \"$srcdir\" \"$srcdir/..\" \"$srcdir/../..\"" "$LINENO" 5 -fi - -# These three variables are undocumented and unsupported, -# and are intended to be withdrawn in a future Autoconf release. -# They can cause serious problems if a builder's source tree is in a directory -# whose full name contains unusual characters. -ac_config_guess="$SHELL $ac_aux_dir/config.guess" # Please don't use this var. -ac_config_sub="$SHELL $ac_aux_dir/config.sub" # Please don't use this var. -ac_configure="$SHELL $ac_aux_dir/configure" # Please don't use this var. - - -# Find a good install program. We prefer a C program (faster), -# so one script is as good as another. But avoid the broken or -# incompatible versions: -# SysV /etc/install, /usr/sbin/install -# SunOS /usr/etc/install -# IRIX /sbin/install -# AIX /bin/install -# AmigaOS /C/install, which installs bootblocks on floppy discs -# AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag -# AFS /usr/afsws/bin/install, which mishandles nonexistent args -# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff" -# OS/2's system install, which has a completely different semantic -# ./install, which can be erroneously created by make from ./install.sh. -# Reject install programs that cannot install multiple files. -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for a BSD-compatible install" >&5 -$as_echo_n "checking for a BSD-compatible install... " >&6; } -if test -z "$INSTALL"; then -if test "${ac_cv_path_install+set}" = set; then : - $as_echo_n "(cached) " >&6 -else - as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - # Account for people who put trailing slashes in PATH elements. -case $as_dir/ in #(( - ./ | .// | /[cC]/* | \ - /etc/* | /usr/sbin/* | /usr/etc/* | /sbin/* | /usr/afsws/bin/* | \ - ?:[\\/]os2[\\/]install[\\/]* | ?:[\\/]OS2[\\/]INSTALL[\\/]* | \ - /usr/ucb/* ) ;; - *) - # OSF1 and SCO ODT 3.0 have their own names for install. - # Don't use installbsd from OSF since it installs stuff as root - # by default. - for ac_prog in ginstall scoinst install; do - for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_prog$ac_exec_ext" && $as_test_x "$as_dir/$ac_prog$ac_exec_ext"; }; then - if test $ac_prog = install && - grep dspmsg "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then - # AIX install. It has an incompatible calling convention. - : - elif test $ac_prog = install && - grep pwplus "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then - # program-specific install script used by HP pwplus--don't use. - : - else - rm -rf conftest.one conftest.two conftest.dir - echo one > conftest.one - echo two > conftest.two - mkdir conftest.dir - if "$as_dir/$ac_prog$ac_exec_ext" -c conftest.one conftest.two "`pwd`/conftest.dir" && - test -s conftest.one && test -s conftest.two && - test -s conftest.dir/conftest.one && - test -s conftest.dir/conftest.two - then - ac_cv_path_install="$as_dir/$ac_prog$ac_exec_ext -c" - break 3 - fi - fi - fi - done - done - ;; -esac - - done -IFS=$as_save_IFS - -rm -rf conftest.one conftest.two conftest.dir - -fi - if test "${ac_cv_path_install+set}" = set; then - INSTALL=$ac_cv_path_install - else - # As a last resort, use the slow shell script. Don't cache a - # value for INSTALL within a source directory, because that will - # break other packages using the cache if that directory is - # removed, or if the value is a relative name. - INSTALL=$ac_install_sh - fi -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $INSTALL" >&5 -$as_echo "$INSTALL" >&6; } - -# Use test -z because SunOS4 sh mishandles braces in ${var-val}. -# It thinks the first close brace ends the variable substitution. -test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}' - -test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL}' - -test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644' - -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether build environment is sane" >&5 -$as_echo_n "checking whether build environment is sane... " >&6; } -# Just in case -sleep 1 -echo timestamp > conftest.file -# Reject unsafe characters in $srcdir or the absolute working directory -# name. Accept space and tab only in the latter. -am_lf=' -' -case `pwd` in - *[\\\"\#\$\&\'\`$am_lf]*) - as_fn_error "unsafe absolute working directory name" "$LINENO" 5;; -esac -case $srcdir in - *[\\\"\#\$\&\'\`$am_lf\ \ ]*) - as_fn_error "unsafe srcdir value: \`$srcdir'" "$LINENO" 5;; -esac - -# Do `set' in a subshell so we don't clobber the current shell's -# arguments. Must try -L first in case configure is actually a -# symlink; some systems play weird games with the mod time of symlinks -# (eg FreeBSD returns the mod time of the symlink's containing -# directory). -if ( - set X `ls -Lt "$srcdir/configure" conftest.file 2> /dev/null` - if test "$*" = "X"; then - # -L didn't work. - set X `ls -t "$srcdir/configure" conftest.file` - fi - rm -f conftest.file - if test "$*" != "X $srcdir/configure conftest.file" \ - && test "$*" != "X conftest.file $srcdir/configure"; then - - # If neither matched, then we have a broken ls. This can happen - # if, for instance, CONFIG_SHELL is bash and it inherits a - # broken ls alias from the environment. This has actually - # happened. Such a system could not be considered "sane". - as_fn_error "ls -t appears to fail. Make sure there is not a broken -alias in your environment" "$LINENO" 5 - fi - - test "$2" = conftest.file - ) -then - # Ok. - : -else - as_fn_error "newly created file is older than distributed files! -Check your system clock" "$LINENO" 5 -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 -$as_echo "yes" >&6; } -test "$program_prefix" != NONE && - program_transform_name="s&^&$program_prefix&;$program_transform_name" -# Use a double $ so make ignores it. -test "$program_suffix" != NONE && - program_transform_name="s&\$&$program_suffix&;$program_transform_name" -# Double any \ or $. -# By default was `s,x,x', remove it if useless. -ac_script='s/[\\$]/&&/g;s/;s,x,x,$//' -program_transform_name=`$as_echo "$program_transform_name" | sed "$ac_script"` - -# expand $ac_aux_dir to an absolute path -am_aux_dir=`cd $ac_aux_dir && pwd` - -if test x"${MISSING+set}" != xset; then - case $am_aux_dir in - *\ * | *\ *) - MISSING="\${SHELL} \"$am_aux_dir/missing\"" ;; - *) - MISSING="\${SHELL} $am_aux_dir/missing" ;; - esac -fi -# Use eval to expand $SHELL -if eval "$MISSING --run true"; then - am_missing_run="$MISSING --run " -else - am_missing_run= - { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: \`missing' script is too old or missing" >&5 -$as_echo "$as_me: WARNING: \`missing' script is too old or missing" >&2;} -fi - -if test x"${install_sh}" != xset; then - case $am_aux_dir in - *\ * | *\ *) - install_sh="\${SHELL} '$am_aux_dir/install-sh'" ;; - *) - install_sh="\${SHELL} $am_aux_dir/install-sh" - esac -fi - -# Installed binaries are usually stripped using `strip' when the user -# run `make install-strip'. However `strip' might not be the right -# tool to use in cross-compilation environments, therefore Automake -# will honor the `STRIP' environment variable to overrule this program. -if test "$cross_compiling" != no; then - if test -n "$ac_tool_prefix"; then - # Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args. -set dummy ${ac_tool_prefix}strip; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if test "${ac_cv_prog_STRIP+set}" = set; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$STRIP"; then - ac_cv_prog_STRIP="$STRIP" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_prog_STRIP="${ac_tool_prefix}strip" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -fi -fi -STRIP=$ac_cv_prog_STRIP -if test -n "$STRIP"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $STRIP" >&5 -$as_echo "$STRIP" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - -fi -if test -z "$ac_cv_prog_STRIP"; then - ac_ct_STRIP=$STRIP - # Extract the first word of "strip", so it can be a program name with args. -set dummy strip; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if test "${ac_cv_prog_ac_ct_STRIP+set}" = set; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$ac_ct_STRIP"; then - ac_cv_prog_ac_ct_STRIP="$ac_ct_STRIP" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_prog_ac_ct_STRIP="strip" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -fi -fi -ac_ct_STRIP=$ac_cv_prog_ac_ct_STRIP -if test -n "$ac_ct_STRIP"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_STRIP" >&5 -$as_echo "$ac_ct_STRIP" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - if test "x$ac_ct_STRIP" = x; then - STRIP=":" - else - case $cross_compiling:$ac_tool_warned in -yes:) -{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 -$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} -ac_tool_warned=yes ;; -esac - STRIP=$ac_ct_STRIP - fi -else - STRIP="$ac_cv_prog_STRIP" -fi - -fi -INSTALL_STRIP_PROGRAM="\$(install_sh) -c -s" - -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for a thread-safe mkdir -p" >&5 -$as_echo_n "checking for a thread-safe mkdir -p... " >&6; } -if test -z "$MKDIR_P"; then - if test "${ac_cv_path_mkdir+set}" = set; then : - $as_echo_n "(cached) " >&6 -else - as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH$PATH_SEPARATOR/opt/sfw/bin -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_prog in mkdir gmkdir; do - for ac_exec_ext in '' $ac_executable_extensions; do - { test -f "$as_dir/$ac_prog$ac_exec_ext" && $as_test_x "$as_dir/$ac_prog$ac_exec_ext"; } || continue - case `"$as_dir/$ac_prog$ac_exec_ext" --version 2>&1` in #( - 'mkdir (GNU coreutils) '* | \ - 'mkdir (coreutils) '* | \ - 'mkdir (fileutils) '4.1*) - ac_cv_path_mkdir=$as_dir/$ac_prog$ac_exec_ext - break 3;; - esac - done - done - done -IFS=$as_save_IFS - -fi - - test -d ./--version && rmdir ./--version - if test "${ac_cv_path_mkdir+set}" = set; then - MKDIR_P="$ac_cv_path_mkdir -p" - else - # As a last resort, use the slow shell script. Don't cache a - # value for MKDIR_P within a source directory, because that will - # break other packages using the cache if that directory is - # removed, or if the value is a relative name. - MKDIR_P="$ac_install_sh -d" - fi -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $MKDIR_P" >&5 -$as_echo "$MKDIR_P" >&6; } - -mkdir_p="$MKDIR_P" -case $mkdir_p in - [\\/$]* | ?:[\\/]*) ;; - */*) mkdir_p="\$(top_builddir)/$mkdir_p" ;; -esac - -for ac_prog in gawk mawk nawk awk -do - # Extract the first word of "$ac_prog", so it can be a program name with args. -set dummy $ac_prog; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if test "${ac_cv_prog_AWK+set}" = set; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$AWK"; then - ac_cv_prog_AWK="$AWK" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_prog_AWK="$ac_prog" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -fi -fi -AWK=$ac_cv_prog_AWK -if test -n "$AWK"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $AWK" >&5 -$as_echo "$AWK" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - - test -n "$AWK" && break -done - -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether ${MAKE-make} sets \$(MAKE)" >&5 -$as_echo_n "checking whether ${MAKE-make} sets \$(MAKE)... " >&6; } -set x ${MAKE-make} -ac_make=`$as_echo "$2" | sed 's/+/p/g; s/[^a-zA-Z0-9_]/_/g'` -if { as_var=ac_cv_prog_make_${ac_make}_set; eval "test \"\${$as_var+set}\" = set"; }; then : - $as_echo_n "(cached) " >&6 -else - cat >conftest.make <<\_ACEOF -SHELL = /bin/sh -all: - @echo '@@@%%%=$(MAKE)=@@@%%%' -_ACEOF -# GNU make sometimes prints "make[1]: Entering...", which would confuse us. -case `${MAKE-make} -f conftest.make 2>/dev/null` in - *@@@%%%=?*=@@@%%%*) - eval ac_cv_prog_make_${ac_make}_set=yes;; - *) - eval ac_cv_prog_make_${ac_make}_set=no;; -esac -rm -f conftest.make -fi -if eval test \$ac_cv_prog_make_${ac_make}_set = yes; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 -$as_echo "yes" >&6; } - SET_MAKE= -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } - SET_MAKE="MAKE=${MAKE-make}" -fi - -rm -rf .tst 2>/dev/null -mkdir .tst 2>/dev/null -if test -d .tst; then - am__leading_dot=. -else - am__leading_dot=_ -fi -rmdir .tst 2>/dev/null - -if test "`cd $srcdir && pwd`" != "`pwd`"; then - # Use -I$(srcdir) only when $(srcdir) != ., so that make's output - # is not polluted with repeated "-I." - am__isrc=' -I$(srcdir)' - # test to see if srcdir already configured - if test -f $srcdir/config.status; then - as_fn_error "source directory already configured; run \"make distclean\" there first" "$LINENO" 5 - fi -fi - -# test whether we have cygpath -if test -z "$CYGPATH_W"; then - if (cygpath --version) >/dev/null 2>/dev/null; then - CYGPATH_W='cygpath -w' - else - CYGPATH_W=echo - fi -fi - - -# Define the identity of the package. - PACKAGE='pixman' - VERSION='0.18.2' - - -cat >>confdefs.h <<_ACEOF -#define PACKAGE "$PACKAGE" -_ACEOF - - -cat >>confdefs.h <<_ACEOF -#define VERSION "$VERSION" -_ACEOF - -# Some tools Automake needs. - -ACLOCAL=${ACLOCAL-"${am_missing_run}aclocal-${am__api_version}"} - - -AUTOCONF=${AUTOCONF-"${am_missing_run}autoconf"} - - -AUTOMAKE=${AUTOMAKE-"${am_missing_run}automake-${am__api_version}"} - - -AUTOHEADER=${AUTOHEADER-"${am_missing_run}autoheader"} - - -MAKEINFO=${MAKEINFO-"${am_missing_run}makeinfo"} - -# We need awk for the "check" target. The system "awk" is bad on -# some platforms. -# Always define AMTAR for backward compatibility. - -AMTAR=${AMTAR-"${am_missing_run}tar"} - -am__tar='${AMTAR} chof - "$$tardir"'; am__untar='${AMTAR} xf -' - - - - - - -# Suppress verbose compile lines -# Check whether --enable-silent-rules was given. -if test "${enable_silent_rules+set}" = set; then : - enableval=$enable_silent_rules; -fi - -case $enable_silent_rules in -yes) AM_DEFAULT_VERBOSITY=0;; -no) AM_DEFAULT_VERBOSITY=1;; -*) AM_DEFAULT_VERBOSITY=0;; -esac -AM_BACKSLASH='\' - - -ac_config_headers="$ac_config_headers config.h" - - -# Make sure we can run config.sub. -$SHELL "$ac_aux_dir/config.sub" sun4 >/dev/null 2>&1 || - as_fn_error "cannot run $SHELL $ac_aux_dir/config.sub" "$LINENO" 5 - -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking build system type" >&5 -$as_echo_n "checking build system type... " >&6; } -if test "${ac_cv_build+set}" = set; then : - $as_echo_n "(cached) " >&6 -else - ac_build_alias=$build_alias -test "x$ac_build_alias" = x && - ac_build_alias=`$SHELL "$ac_aux_dir/config.guess"` -test "x$ac_build_alias" = x && - as_fn_error "cannot guess build type; you must specify one" "$LINENO" 5 -ac_cv_build=`$SHELL "$ac_aux_dir/config.sub" $ac_build_alias` || - as_fn_error "$SHELL $ac_aux_dir/config.sub $ac_build_alias failed" "$LINENO" 5 - -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_build" >&5 -$as_echo "$ac_cv_build" >&6; } -case $ac_cv_build in -*-*-*) ;; -*) as_fn_error "invalid value of canonical build" "$LINENO" 5;; -esac -build=$ac_cv_build -ac_save_IFS=$IFS; IFS='-' -set x $ac_cv_build -shift -build_cpu=$1 -build_vendor=$2 -shift; shift -# Remember, the first character of IFS is used to create $*, -# except with old shells: -build_os=$* -IFS=$ac_save_IFS -case $build_os in *\ *) build_os=`echo "$build_os" | sed 's/ /-/g'`;; esac - - -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking host system type" >&5 -$as_echo_n "checking host system type... " >&6; } -if test "${ac_cv_host+set}" = set; then : - $as_echo_n "(cached) " >&6 -else - if test "x$host_alias" = x; then - ac_cv_host=$ac_cv_build -else - ac_cv_host=`$SHELL "$ac_aux_dir/config.sub" $host_alias` || - as_fn_error "$SHELL $ac_aux_dir/config.sub $host_alias failed" "$LINENO" 5 -fi - -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_host" >&5 -$as_echo "$ac_cv_host" >&6; } -case $ac_cv_host in -*-*-*) ;; -*) as_fn_error "invalid value of canonical host" "$LINENO" 5;; -esac -host=$ac_cv_host -ac_save_IFS=$IFS; IFS='-' -set x $ac_cv_host -shift -host_cpu=$1 -host_vendor=$2 -shift; shift -# Remember, the first character of IFS is used to create $*, -# except with old shells: -host_os=$* -IFS=$ac_save_IFS -case $host_os in *\ *) host_os=`echo "$host_os" | sed 's/ /-/g'`;; esac - - - -test_CFLAGS=${CFLAGS+set} # We may override autoconf default CFLAGS. - -ac_ext=c -ac_cpp='$CPP $CPPFLAGS' -ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' -ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_c_compiler_gnu -if test -n "$ac_tool_prefix"; then - # Extract the first word of "${ac_tool_prefix}gcc", so it can be a program name with args. -set dummy ${ac_tool_prefix}gcc; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if test "${ac_cv_prog_CC+set}" = set; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$CC"; then - ac_cv_prog_CC="$CC" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_prog_CC="${ac_tool_prefix}gcc" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -fi -fi -CC=$ac_cv_prog_CC -if test -n "$CC"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5 -$as_echo "$CC" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - -fi -if test -z "$ac_cv_prog_CC"; then - ac_ct_CC=$CC - # Extract the first word of "gcc", so it can be a program name with args. -set dummy gcc; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if test "${ac_cv_prog_ac_ct_CC+set}" = set; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$ac_ct_CC"; then - ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_prog_ac_ct_CC="gcc" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -fi -fi -ac_ct_CC=$ac_cv_prog_ac_ct_CC -if test -n "$ac_ct_CC"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_CC" >&5 -$as_echo "$ac_ct_CC" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - if test "x$ac_ct_CC" = x; then - CC="" - else - case $cross_compiling:$ac_tool_warned in -yes:) -{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 -$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} -ac_tool_warned=yes ;; -esac - CC=$ac_ct_CC - fi -else - CC="$ac_cv_prog_CC" -fi - -if test -z "$CC"; then - if test -n "$ac_tool_prefix"; then - # Extract the first word of "${ac_tool_prefix}cc", so it can be a program name with args. -set dummy ${ac_tool_prefix}cc; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if test "${ac_cv_prog_CC+set}" = set; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$CC"; then - ac_cv_prog_CC="$CC" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_prog_CC="${ac_tool_prefix}cc" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -fi -fi -CC=$ac_cv_prog_CC -if test -n "$CC"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5 -$as_echo "$CC" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - - fi -fi -if test -z "$CC"; then - # Extract the first word of "cc", so it can be a program name with args. -set dummy cc; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if test "${ac_cv_prog_CC+set}" = set; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$CC"; then - ac_cv_prog_CC="$CC" # Let the user override the test. -else - ac_prog_rejected=no -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - if test "$as_dir/$ac_word$ac_exec_ext" = "/usr/ucb/cc"; then - ac_prog_rejected=yes - continue - fi - ac_cv_prog_CC="cc" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -if test $ac_prog_rejected = yes; then - # We found a bogon in the path, so make sure we never use it. - set dummy $ac_cv_prog_CC - shift - if test $# != 0; then - # We chose a different compiler from the bogus one. - # However, it has the same basename, so the bogon will be chosen - # first if we set CC to just the basename; use the full file name. - shift - ac_cv_prog_CC="$as_dir/$ac_word${1+' '}$@" - fi -fi -fi -fi -CC=$ac_cv_prog_CC -if test -n "$CC"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5 -$as_echo "$CC" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - -fi -if test -z "$CC"; then - if test -n "$ac_tool_prefix"; then - for ac_prog in cl.exe - do - # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args. -set dummy $ac_tool_prefix$ac_prog; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if test "${ac_cv_prog_CC+set}" = set; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$CC"; then - ac_cv_prog_CC="$CC" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_prog_CC="$ac_tool_prefix$ac_prog" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -fi -fi -CC=$ac_cv_prog_CC -if test -n "$CC"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5 -$as_echo "$CC" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - - test -n "$CC" && break - done -fi -if test -z "$CC"; then - ac_ct_CC=$CC - for ac_prog in cl.exe -do - # Extract the first word of "$ac_prog", so it can be a program name with args. -set dummy $ac_prog; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if test "${ac_cv_prog_ac_ct_CC+set}" = set; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$ac_ct_CC"; then - ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_prog_ac_ct_CC="$ac_prog" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -fi -fi -ac_ct_CC=$ac_cv_prog_ac_ct_CC -if test -n "$ac_ct_CC"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_CC" >&5 -$as_echo "$ac_ct_CC" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - - test -n "$ac_ct_CC" && break -done - - if test "x$ac_ct_CC" = x; then - CC="" - else - case $cross_compiling:$ac_tool_warned in -yes:) -{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 -$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} -ac_tool_warned=yes ;; -esac - CC=$ac_ct_CC - fi -fi - -fi - - -test -z "$CC" && { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 -$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} -as_fn_error "no acceptable C compiler found in \$PATH -See \`config.log' for more details." "$LINENO" 5; } - -# Provide some information about the compiler. -$as_echo "$as_me:${as_lineno-$LINENO}: checking for C compiler version" >&5 -set X $ac_compile -ac_compiler=$2 -for ac_option in --version -v -V -qversion; do - { { ac_try="$ac_compiler $ac_option >&5" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" -$as_echo "$ac_try_echo"; } >&5 - (eval "$ac_compiler $ac_option >&5") 2>conftest.err - ac_status=$? - if test -s conftest.err; then - sed '10a\ -... rest of stderr output deleted ... - 10q' conftest.err >conftest.er1 - cat conftest.er1 >&5 - fi - rm -f conftest.er1 conftest.err - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; } -done - -cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - -int -main () -{ - - ; - return 0; -} -_ACEOF -ac_clean_files_save=$ac_clean_files -ac_clean_files="$ac_clean_files a.out a.out.dSYM a.exe b.out" -# Try to create an executable without -o first, disregard a.out. -# It will help us diagnose broken compilers, and finding out an intuition -# of exeext. -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the C compiler works" >&5 -$as_echo_n "checking whether the C compiler works... " >&6; } -ac_link_default=`$as_echo "$ac_link" | sed 's/ -o *conftest[^ ]*//'` - -# The possible output files: -ac_files="a.out conftest.exe conftest a.exe a_out.exe b.out conftest.*" - -ac_rmfiles= -for ac_file in $ac_files -do - case $ac_file in - *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj ) ;; - * ) ac_rmfiles="$ac_rmfiles $ac_file";; - esac -done -rm -f $ac_rmfiles - -if { { ac_try="$ac_link_default" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" -$as_echo "$ac_try_echo"; } >&5 - (eval "$ac_link_default") 2>&5 - ac_status=$? - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; }; then : - # Autoconf-2.13 could set the ac_cv_exeext variable to `no'. -# So ignore a value of `no', otherwise this would lead to `EXEEXT = no' -# in a Makefile. We should not override ac_cv_exeext if it was cached, -# so that the user can short-circuit this test for compilers unknown to -# Autoconf. -for ac_file in $ac_files '' -do - test -f "$ac_file" || continue - case $ac_file in - *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj ) - ;; - [ab].out ) - # We found the default executable, but exeext='' is most - # certainly right. - break;; - *.* ) - if test "${ac_cv_exeext+set}" = set && test "$ac_cv_exeext" != no; - then :; else - ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'` - fi - # We set ac_cv_exeext here because the later test for it is not - # safe: cross compilers may not add the suffix if given an `-o' - # argument, so we may need to know it at that point already. - # Even if this section looks crufty: it has the advantage of - # actually working. - break;; - * ) - break;; - esac -done -test "$ac_cv_exeext" = no && ac_cv_exeext= - -else - ac_file='' -fi -if test -z "$ac_file"; then : - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -$as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -{ { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 -$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} -{ as_fn_set_status 77 -as_fn_error "C compiler cannot create executables -See \`config.log' for more details." "$LINENO" 5; }; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 -$as_echo "yes" >&6; } -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for C compiler default output file name" >&5 -$as_echo_n "checking for C compiler default output file name... " >&6; } -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_file" >&5 -$as_echo "$ac_file" >&6; } -ac_exeext=$ac_cv_exeext - -rm -f -r a.out a.out.dSYM a.exe conftest$ac_cv_exeext b.out -ac_clean_files=$ac_clean_files_save -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for suffix of executables" >&5 -$as_echo_n "checking for suffix of executables... " >&6; } -if { { ac_try="$ac_link" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" -$as_echo "$ac_try_echo"; } >&5 - (eval "$ac_link") 2>&5 - ac_status=$? - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; }; then : - # If both `conftest.exe' and `conftest' are `present' (well, observable) -# catch `conftest.exe'. For instance with Cygwin, `ls conftest' will -# work properly (i.e., refer to `conftest.exe'), while it won't with -# `rm'. -for ac_file in conftest.exe conftest conftest.*; do - test -f "$ac_file" || continue - case $ac_file in - *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj ) ;; - *.* ) ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'` - break;; - * ) break;; - esac -done -else - { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 -$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} -as_fn_error "cannot compute suffix of executables: cannot compile and link -See \`config.log' for more details." "$LINENO" 5; } -fi -rm -f conftest conftest$ac_cv_exeext -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_exeext" >&5 -$as_echo "$ac_cv_exeext" >&6; } - -rm -f conftest.$ac_ext -EXEEXT=$ac_cv_exeext -ac_exeext=$EXEEXT -cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -#include <stdio.h> -int -main () -{ -FILE *f = fopen ("conftest.out", "w"); - return ferror (f) || fclose (f) != 0; - - ; - return 0; -} -_ACEOF -ac_clean_files="$ac_clean_files conftest.out" -# Check that the compiler produces executables we can run. If not, either -# the compiler is broken, or we cross compile. -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether we are cross compiling" >&5 -$as_echo_n "checking whether we are cross compiling... " >&6; } -if test "$cross_compiling" != yes; then - { { ac_try="$ac_link" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" -$as_echo "$ac_try_echo"; } >&5 - (eval "$ac_link") 2>&5 - ac_status=$? - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; } - if { ac_try='./conftest$ac_cv_exeext' - { { case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" -$as_echo "$ac_try_echo"; } >&5 - (eval "$ac_try") 2>&5 - ac_status=$? - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; }; }; then - cross_compiling=no - else - if test "$cross_compiling" = maybe; then - cross_compiling=yes - else - { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 -$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} -as_fn_error "cannot run C compiled programs. -If you meant to cross compile, use \`--host'. -See \`config.log' for more details." "$LINENO" 5; } - fi - fi -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $cross_compiling" >&5 -$as_echo "$cross_compiling" >&6; } - -rm -f conftest.$ac_ext conftest$ac_cv_exeext conftest.out -ac_clean_files=$ac_clean_files_save -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for suffix of object files" >&5 -$as_echo_n "checking for suffix of object files... " >&6; } -if test "${ac_cv_objext+set}" = set; then : - $as_echo_n "(cached) " >&6 -else - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - -int -main () -{ - - ; - return 0; -} -_ACEOF -rm -f conftest.o conftest.obj -if { { ac_try="$ac_compile" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" -$as_echo "$ac_try_echo"; } >&5 - (eval "$ac_compile") 2>&5 - ac_status=$? - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; }; then : - for ac_file in conftest.o conftest.obj conftest.*; do - test -f "$ac_file" || continue; - case $ac_file in - *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM ) ;; - *) ac_cv_objext=`expr "$ac_file" : '.*\.\(.*\)'` - break;; - esac -done -else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -{ { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 -$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} -as_fn_error "cannot compute suffix of object files: cannot compile -See \`config.log' for more details." "$LINENO" 5; } -fi -rm -f conftest.$ac_cv_objext conftest.$ac_ext -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_objext" >&5 -$as_echo "$ac_cv_objext" >&6; } -OBJEXT=$ac_cv_objext -ac_objext=$OBJEXT -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether we are using the GNU C compiler" >&5 -$as_echo_n "checking whether we are using the GNU C compiler... " >&6; } -if test "${ac_cv_c_compiler_gnu+set}" = set; then : - $as_echo_n "(cached) " >&6 -else - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - -int -main () -{ -#ifndef __GNUC__ - choke me -#endif - - ; - return 0; -} -_ACEOF -if ac_fn_c_try_compile "$LINENO"; then : - ac_compiler_gnu=yes -else - ac_compiler_gnu=no -fi -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext -ac_cv_c_compiler_gnu=$ac_compiler_gnu - -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_c_compiler_gnu" >&5 -$as_echo "$ac_cv_c_compiler_gnu" >&6; } -if test $ac_compiler_gnu = yes; then - GCC=yes -else - GCC= -fi -ac_test_CFLAGS=${CFLAGS+set} -ac_save_CFLAGS=$CFLAGS -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $CC accepts -g" >&5 -$as_echo_n "checking whether $CC accepts -g... " >&6; } -if test "${ac_cv_prog_cc_g+set}" = set; then : - $as_echo_n "(cached) " >&6 -else - ac_save_c_werror_flag=$ac_c_werror_flag - ac_c_werror_flag=yes - ac_cv_prog_cc_g=no - CFLAGS="-g" - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - -int -main () -{ - - ; - return 0; -} -_ACEOF -if ac_fn_c_try_compile "$LINENO"; then : - ac_cv_prog_cc_g=yes -else - CFLAGS="" - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - -int -main () -{ - - ; - return 0; -} -_ACEOF -if ac_fn_c_try_compile "$LINENO"; then : - -else - ac_c_werror_flag=$ac_save_c_werror_flag - CFLAGS="-g" - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - -int -main () -{ - - ; - return 0; -} -_ACEOF -if ac_fn_c_try_compile "$LINENO"; then : - ac_cv_prog_cc_g=yes -fi -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext -fi -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext -fi -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext - ac_c_werror_flag=$ac_save_c_werror_flag -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_cc_g" >&5 -$as_echo "$ac_cv_prog_cc_g" >&6; } -if test "$ac_test_CFLAGS" = set; then - CFLAGS=$ac_save_CFLAGS -elif test $ac_cv_prog_cc_g = yes; then - if test "$GCC" = yes; then - CFLAGS="-g -O2" - else - CFLAGS="-g" - fi -else - if test "$GCC" = yes; then - CFLAGS="-O2" - else - CFLAGS= - fi -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $CC option to accept ISO C89" >&5 -$as_echo_n "checking for $CC option to accept ISO C89... " >&6; } -if test "${ac_cv_prog_cc_c89+set}" = set; then : - $as_echo_n "(cached) " >&6 -else - ac_cv_prog_cc_c89=no -ac_save_CC=$CC -cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -#include <stdarg.h> -#include <stdio.h> -#include <sys/types.h> -#include <sys/stat.h> -/* Most of the following tests are stolen from RCS 5.7's src/conf.sh. */ -struct buf { int x; }; -FILE * (*rcsopen) (struct buf *, struct stat *, int); -static char *e (p, i) - char **p; - int i; -{ - return p[i]; -} -static char *f (char * (*g) (char **, int), char **p, ...) -{ - char *s; - va_list v; - va_start (v,p); - s = g (p, va_arg (v,int)); - va_end (v); - return s; -} - -/* OSF 4.0 Compaq cc is some sort of almost-ANSI by default. It has - function prototypes and stuff, but not '\xHH' hex character constants. - These don't provoke an error unfortunately, instead are silently treated - as 'x'. The following induces an error, until -std is added to get - proper ANSI mode. Curiously '\x00'!='x' always comes out true, for an - array size at least. It's necessary to write '\x00'==0 to get something - that's true only with -std. */ -int osf4_cc_array ['\x00' == 0 ? 1 : -1]; - -/* IBM C 6 for AIX is almost-ANSI by default, but it replaces macro parameters - inside strings and character constants. */ -#define FOO(x) 'x' -int xlc6_cc_array[FOO(a) == 'x' ? 1 : -1]; - -int test (int i, double x); -struct s1 {int (*f) (int a);}; -struct s2 {int (*f) (double a);}; -int pairnames (int, char **, FILE *(*)(struct buf *, struct stat *, int), int, int); -int argc; -char **argv; -int -main () -{ -return f (e, argv, 0) != argv[0] || f (e, argv, 1) != argv[1]; - ; - return 0; -} -_ACEOF -for ac_arg in '' -qlanglvl=extc89 -qlanglvl=ansi -std \ - -Ae "-Aa -D_HPUX_SOURCE" "-Xc -D__EXTENSIONS__" -do - CC="$ac_save_CC $ac_arg" - if ac_fn_c_try_compile "$LINENO"; then : - ac_cv_prog_cc_c89=$ac_arg -fi -rm -f core conftest.err conftest.$ac_objext - test "x$ac_cv_prog_cc_c89" != "xno" && break -done -rm -f conftest.$ac_ext -CC=$ac_save_CC - -fi -# AC_CACHE_VAL -case "x$ac_cv_prog_cc_c89" in - x) - { $as_echo "$as_me:${as_lineno-$LINENO}: result: none needed" >&5 -$as_echo "none needed" >&6; } ;; - xno) - { $as_echo "$as_me:${as_lineno-$LINENO}: result: unsupported" >&5 -$as_echo "unsupported" >&6; } ;; - *) - CC="$CC $ac_cv_prog_cc_c89" - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_cc_c89" >&5 -$as_echo "$ac_cv_prog_cc_c89" >&6; } ;; -esac -if test "x$ac_cv_prog_cc_c89" != xno; then : - -fi - -ac_ext=c -ac_cpp='$CPP $CPPFLAGS' -ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' -ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_c_compiler_gnu -DEPDIR="${am__leading_dot}deps" - -ac_config_commands="$ac_config_commands depfiles" - - -am_make=${MAKE-make} -cat > confinc << 'END' -am__doit: - @echo this is the am__doit target -.PHONY: am__doit -END -# If we don't find an include directive, just comment out the code. -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for style of include used by $am_make" >&5 -$as_echo_n "checking for style of include used by $am_make... " >&6; } -am__include="#" -am__quote= -_am_result=none -# First try GNU make style include. -echo "include confinc" > confmf -# Ignore all kinds of additional output from `make'. -case `$am_make -s -f confmf 2> /dev/null` in #( -*the\ am__doit\ target*) - am__include=include - am__quote= - _am_result=GNU - ;; -esac -# Now try BSD make style include. -if test "$am__include" = "#"; then - echo '.include "confinc"' > confmf - case `$am_make -s -f confmf 2> /dev/null` in #( - *the\ am__doit\ target*) - am__include=.include - am__quote="\"" - _am_result=BSD - ;; - esac -fi - - -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $_am_result" >&5 -$as_echo "$_am_result" >&6; } -rm -f confinc confmf - -# Check whether --enable-dependency-tracking was given. -if test "${enable_dependency_tracking+set}" = set; then : - enableval=$enable_dependency_tracking; -fi - -if test "x$enable_dependency_tracking" != xno; then - am_depcomp="$ac_aux_dir/depcomp" - AMDEPBACKSLASH='\' -fi - if test "x$enable_dependency_tracking" != xno; then - AMDEP_TRUE= - AMDEP_FALSE='#' -else - AMDEP_TRUE='#' - AMDEP_FALSE= -fi - - - -depcc="$CC" am_compiler_list= - -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking dependency style of $depcc" >&5 -$as_echo_n "checking dependency style of $depcc... " >&6; } -if test "${am_cv_CC_dependencies_compiler_type+set}" = set; then : - $as_echo_n "(cached) " >&6 -else - if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then - # We make a subdir and do the tests there. Otherwise we can end up - # making bogus files that we don't know about and never remove. For - # instance it was reported that on HP-UX the gcc test will end up - # making a dummy file named `D' -- because `-MD' means `put the output - # in D'. - mkdir conftest.dir - # Copy depcomp to subdir because otherwise we won't find it if we're - # using a relative directory. - cp "$am_depcomp" conftest.dir - cd conftest.dir - # We will build objects and dependencies in a subdirectory because - # it helps to detect inapplicable dependency modes. For instance - # both Tru64's cc and ICC support -MD to output dependencies as a - # side effect of compilation, but ICC will put the dependencies in - # the current directory while Tru64 will put them in the object - # directory. - mkdir sub - - am_cv_CC_dependencies_compiler_type=none - if test "$am_compiler_list" = ""; then - am_compiler_list=`sed -n 's/^#*\([a-zA-Z0-9]*\))$/\1/p' < ./depcomp` - fi - am__universal=false - case " $depcc " in #( - *\ -arch\ *\ -arch\ *) am__universal=true ;; - esac - - for depmode in $am_compiler_list; do - # Setup a source with many dependencies, because some compilers - # like to wrap large dependency lists on column 80 (with \), and - # we should not choose a depcomp mode which is confused by this. - # - # We need to recreate these files for each test, as the compiler may - # overwrite some of them when testing with obscure command lines. - # This happens at least with the AIX C compiler. - : > sub/conftest.c - for i in 1 2 3 4 5 6; do - echo '#include "conftst'$i'.h"' >> sub/conftest.c - # Using `: > sub/conftst$i.h' creates only sub/conftst1.h with - # Solaris 8's {/usr,}/bin/sh. - touch sub/conftst$i.h - done - echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf - - # We check with `-c' and `-o' for the sake of the "dashmstdout" - # mode. It turns out that the SunPro C++ compiler does not properly - # handle `-M -o', and we need to detect this. Also, some Intel - # versions had trouble with output in subdirs - am__obj=sub/conftest.${OBJEXT-o} - am__minus_obj="-o $am__obj" - case $depmode in - gcc) - # This depmode causes a compiler race in universal mode. - test "$am__universal" = false || continue - ;; - nosideeffect) - # after this tag, mechanisms are not by side-effect, so they'll - # only be used when explicitly requested - if test "x$enable_dependency_tracking" = xyes; then - continue - else - break - fi - ;; - msvisualcpp | msvcmsys) - # This compiler won't grok `-c -o', but also, the minuso test has - # not run yet. These depmodes are late enough in the game, and - # so weak that their functioning should not be impacted. - am__obj=conftest.${OBJEXT-o} - am__minus_obj= - ;; - none) break ;; - esac - if depmode=$depmode \ - source=sub/conftest.c object=$am__obj \ - depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \ - $SHELL ./depcomp $depcc -c $am__minus_obj sub/conftest.c \ - >/dev/null 2>conftest.err && - grep sub/conftst1.h sub/conftest.Po > /dev/null 2>&1 && - grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 && - grep $am__obj sub/conftest.Po > /dev/null 2>&1 && - ${MAKE-make} -s -f confmf > /dev/null 2>&1; then - # icc doesn't choke on unknown options, it will just issue warnings - # or remarks (even with -Werror). So we grep stderr for any message - # that says an option was ignored or not supported. - # When given -MP, icc 7.0 and 7.1 complain thusly: - # icc: Command line warning: ignoring option '-M'; no argument required - # The diagnosis changed in icc 8.0: - # icc: Command line remark: option '-MP' not supported - if (grep 'ignoring option' conftest.err || - grep 'not supported' conftest.err) >/dev/null 2>&1; then :; else - am_cv_CC_dependencies_compiler_type=$depmode - break - fi - fi - done - - cd .. - rm -rf conftest.dir -else - am_cv_CC_dependencies_compiler_type=none -fi - -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_CC_dependencies_compiler_type" >&5 -$as_echo "$am_cv_CC_dependencies_compiler_type" >&6; } -CCDEPMODE=depmode=$am_cv_CC_dependencies_compiler_type - - if - test "x$enable_dependency_tracking" != xno \ - && test "$am_cv_CC_dependencies_compiler_type" = gcc3; then - am__fastdepCC_TRUE= - am__fastdepCC_FALSE='#' -else - am__fastdepCC_TRUE='#' - am__fastdepCC_FALSE= -fi - - -# By default we simply use the C compiler to build assembly code. - -test "${CCAS+set}" = set || CCAS=$CC -test "${CCASFLAGS+set}" = set || CCASFLAGS=$CFLAGS - - - -depcc="$CCAS" am_compiler_list= - -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking dependency style of $depcc" >&5 -$as_echo_n "checking dependency style of $depcc... " >&6; } -if test "${am_cv_CCAS_dependencies_compiler_type+set}" = set; then : - $as_echo_n "(cached) " >&6 -else - if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then - # We make a subdir and do the tests there. Otherwise we can end up - # making bogus files that we don't know about and never remove. For - # instance it was reported that on HP-UX the gcc test will end up - # making a dummy file named `D' -- because `-MD' means `put the output - # in D'. - mkdir conftest.dir - # Copy depcomp to subdir because otherwise we won't find it if we're - # using a relative directory. - cp "$am_depcomp" conftest.dir - cd conftest.dir - # We will build objects and dependencies in a subdirectory because - # it helps to detect inapplicable dependency modes. For instance - # both Tru64's cc and ICC support -MD to output dependencies as a - # side effect of compilation, but ICC will put the dependencies in - # the current directory while Tru64 will put them in the object - # directory. - mkdir sub - - am_cv_CCAS_dependencies_compiler_type=none - if test "$am_compiler_list" = ""; then - am_compiler_list=`sed -n 's/^#*\([a-zA-Z0-9]*\))$/\1/p' < ./depcomp` - fi - am__universal=false - - - for depmode in $am_compiler_list; do - # Setup a source with many dependencies, because some compilers - # like to wrap large dependency lists on column 80 (with \), and - # we should not choose a depcomp mode which is confused by this. - # - # We need to recreate these files for each test, as the compiler may - # overwrite some of them when testing with obscure command lines. - # This happens at least with the AIX C compiler. - : > sub/conftest.c - for i in 1 2 3 4 5 6; do - echo '#include "conftst'$i'.h"' >> sub/conftest.c - # Using `: > sub/conftst$i.h' creates only sub/conftst1.h with - # Solaris 8's {/usr,}/bin/sh. - touch sub/conftst$i.h - done - echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf - - # We check with `-c' and `-o' for the sake of the "dashmstdout" - # mode. It turns out that the SunPro C++ compiler does not properly - # handle `-M -o', and we need to detect this. Also, some Intel - # versions had trouble with output in subdirs - am__obj=sub/conftest.${OBJEXT-o} - am__minus_obj="-o $am__obj" - case $depmode in - gcc) - # This depmode causes a compiler race in universal mode. - test "$am__universal" = false || continue - ;; - nosideeffect) - # after this tag, mechanisms are not by side-effect, so they'll - # only be used when explicitly requested - if test "x$enable_dependency_tracking" = xyes; then - continue - else - break - fi - ;; - msvisualcpp | msvcmsys) - # This compiler won't grok `-c -o', but also, the minuso test has - # not run yet. These depmodes are late enough in the game, and - # so weak that their functioning should not be impacted. - am__obj=conftest.${OBJEXT-o} - am__minus_obj= - ;; - none) break ;; - esac - if depmode=$depmode \ - source=sub/conftest.c object=$am__obj \ - depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \ - $SHELL ./depcomp $depcc -c $am__minus_obj sub/conftest.c \ - >/dev/null 2>conftest.err && - grep sub/conftst1.h sub/conftest.Po > /dev/null 2>&1 && - grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 && - grep $am__obj sub/conftest.Po > /dev/null 2>&1 && - ${MAKE-make} -s -f confmf > /dev/null 2>&1; then - # icc doesn't choke on unknown options, it will just issue warnings - # or remarks (even with -Werror). So we grep stderr for any message - # that says an option was ignored or not supported. - # When given -MP, icc 7.0 and 7.1 complain thusly: - # icc: Command line warning: ignoring option '-M'; no argument required - # The diagnosis changed in icc 8.0: - # icc: Command line remark: option '-MP' not supported - if (grep 'ignoring option' conftest.err || - grep 'not supported' conftest.err) >/dev/null 2>&1; then :; else - am_cv_CCAS_dependencies_compiler_type=$depmode - break - fi - fi - done - - cd .. - rm -rf conftest.dir -else - am_cv_CCAS_dependencies_compiler_type=none -fi - -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_CCAS_dependencies_compiler_type" >&5 -$as_echo "$am_cv_CCAS_dependencies_compiler_type" >&6; } -CCASDEPMODE=depmode=$am_cv_CCAS_dependencies_compiler_type - - if - test "x$enable_dependency_tracking" != xno \ - && test "$am_cv_CCAS_dependencies_compiler_type" = gcc3; then - am__fastdepCCAS_TRUE= - am__fastdepCCAS_FALSE='#' -else - am__fastdepCCAS_TRUE='#' - am__fastdepCCAS_FALSE= -fi - - -case `pwd` in - *\ * | *\ *) - { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: Libtool does not cope well with whitespace in \`pwd\`" >&5 -$as_echo "$as_me: WARNING: Libtool does not cope well with whitespace in \`pwd\`" >&2;} ;; -esac - - - -macro_version='2.2.6b' -macro_revision='1.3017' - - - - - - - - - - - - - -ltmain="$ac_aux_dir/ltmain.sh" - -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for a sed that does not truncate output" >&5 -$as_echo_n "checking for a sed that does not truncate output... " >&6; } -if test "${ac_cv_path_SED+set}" = set; then : - $as_echo_n "(cached) " >&6 -else - ac_script=s/aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa/bbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb/ - for ac_i in 1 2 3 4 5 6 7; do - ac_script="$ac_script$as_nl$ac_script" - done - echo "$ac_script" 2>/dev/null | sed 99q >conftest.sed - { ac_script=; unset ac_script;} - if test -z "$SED"; then - ac_path_SED_found=false - # Loop through the user's path and test for each of PROGNAME-LIST - as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_prog in sed gsed; do - for ac_exec_ext in '' $ac_executable_extensions; do - ac_path_SED="$as_dir/$ac_prog$ac_exec_ext" - { test -f "$ac_path_SED" && $as_test_x "$ac_path_SED"; } || continue -# Check for GNU ac_path_SED and select it if it is found. - # Check for GNU $ac_path_SED -case `"$ac_path_SED" --version 2>&1` in -*GNU*) - ac_cv_path_SED="$ac_path_SED" ac_path_SED_found=:;; -*) - ac_count=0 - $as_echo_n 0123456789 >"conftest.in" - while : - do - cat "conftest.in" "conftest.in" >"conftest.tmp" - mv "conftest.tmp" "conftest.in" - cp "conftest.in" "conftest.nl" - $as_echo '' >> "conftest.nl" - "$ac_path_SED" -f conftest.sed < "conftest.nl" >"conftest.out" 2>/dev/null || break - diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break - as_fn_arith $ac_count + 1 && ac_count=$as_val - if test $ac_count -gt ${ac_path_SED_max-0}; then - # Best one so far, save it but keep looking for a better one - ac_cv_path_SED="$ac_path_SED" - ac_path_SED_max=$ac_count - fi - # 10*(2^10) chars as input seems more than enough - test $ac_count -gt 10 && break - done - rm -f conftest.in conftest.tmp conftest.nl conftest.out;; -esac - - $ac_path_SED_found && break 3 - done - done - done -IFS=$as_save_IFS - if test -z "$ac_cv_path_SED"; then - as_fn_error "no acceptable sed could be found in \$PATH" "$LINENO" 5 - fi -else - ac_cv_path_SED=$SED -fi - -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_SED" >&5 -$as_echo "$ac_cv_path_SED" >&6; } - SED="$ac_cv_path_SED" - rm -f conftest.sed - -test -z "$SED" && SED=sed -Xsed="$SED -e 1s/^X//" - - - - - - - - - - - -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for grep that handles long lines and -e" >&5 -$as_echo_n "checking for grep that handles long lines and -e... " >&6; } -if test "${ac_cv_path_GREP+set}" = set; then : - $as_echo_n "(cached) " >&6 -else - if test -z "$GREP"; then - ac_path_GREP_found=false - # Loop through the user's path and test for each of PROGNAME-LIST - as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_prog in grep ggrep; do - for ac_exec_ext in '' $ac_executable_extensions; do - ac_path_GREP="$as_dir/$ac_prog$ac_exec_ext" - { test -f "$ac_path_GREP" && $as_test_x "$ac_path_GREP"; } || continue -# Check for GNU ac_path_GREP and select it if it is found. - # Check for GNU $ac_path_GREP -case `"$ac_path_GREP" --version 2>&1` in -*GNU*) - ac_cv_path_GREP="$ac_path_GREP" ac_path_GREP_found=:;; -*) - ac_count=0 - $as_echo_n 0123456789 >"conftest.in" - while : - do - cat "conftest.in" "conftest.in" >"conftest.tmp" - mv "conftest.tmp" "conftest.in" - cp "conftest.in" "conftest.nl" - $as_echo 'GREP' >> "conftest.nl" - "$ac_path_GREP" -e 'GREP$' -e '-(cannot match)-' < "conftest.nl" >"conftest.out" 2>/dev/null || break - diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break - as_fn_arith $ac_count + 1 && ac_count=$as_val - if test $ac_count -gt ${ac_path_GREP_max-0}; then - # Best one so far, save it but keep looking for a better one - ac_cv_path_GREP="$ac_path_GREP" - ac_path_GREP_max=$ac_count - fi - # 10*(2^10) chars as input seems more than enough - test $ac_count -gt 10 && break - done - rm -f conftest.in conftest.tmp conftest.nl conftest.out;; -esac - - $ac_path_GREP_found && break 3 - done - done - done -IFS=$as_save_IFS - if test -z "$ac_cv_path_GREP"; then - as_fn_error "no acceptable grep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" "$LINENO" 5 - fi -else - ac_cv_path_GREP=$GREP -fi - -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_GREP" >&5 -$as_echo "$ac_cv_path_GREP" >&6; } - GREP="$ac_cv_path_GREP" - - -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for egrep" >&5 -$as_echo_n "checking for egrep... " >&6; } -if test "${ac_cv_path_EGREP+set}" = set; then : - $as_echo_n "(cached) " >&6 -else - if echo a | $GREP -E '(a|b)' >/dev/null 2>&1 - then ac_cv_path_EGREP="$GREP -E" - else - if test -z "$EGREP"; then - ac_path_EGREP_found=false - # Loop through the user's path and test for each of PROGNAME-LIST - as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_prog in egrep; do - for ac_exec_ext in '' $ac_executable_extensions; do - ac_path_EGREP="$as_dir/$ac_prog$ac_exec_ext" - { test -f "$ac_path_EGREP" && $as_test_x "$ac_path_EGREP"; } || continue -# Check for GNU ac_path_EGREP and select it if it is found. - # Check for GNU $ac_path_EGREP -case `"$ac_path_EGREP" --version 2>&1` in -*GNU*) - ac_cv_path_EGREP="$ac_path_EGREP" ac_path_EGREP_found=:;; -*) - ac_count=0 - $as_echo_n 0123456789 >"conftest.in" - while : - do - cat "conftest.in" "conftest.in" >"conftest.tmp" - mv "conftest.tmp" "conftest.in" - cp "conftest.in" "conftest.nl" - $as_echo 'EGREP' >> "conftest.nl" - "$ac_path_EGREP" 'EGREP$' < "conftest.nl" >"conftest.out" 2>/dev/null || break - diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break - as_fn_arith $ac_count + 1 && ac_count=$as_val - if test $ac_count -gt ${ac_path_EGREP_max-0}; then - # Best one so far, save it but keep looking for a better one - ac_cv_path_EGREP="$ac_path_EGREP" - ac_path_EGREP_max=$ac_count - fi - # 10*(2^10) chars as input seems more than enough - test $ac_count -gt 10 && break - done - rm -f conftest.in conftest.tmp conftest.nl conftest.out;; -esac - - $ac_path_EGREP_found && break 3 - done - done - done -IFS=$as_save_IFS - if test -z "$ac_cv_path_EGREP"; then - as_fn_error "no acceptable egrep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" "$LINENO" 5 - fi -else - ac_cv_path_EGREP=$EGREP -fi - - fi -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_EGREP" >&5 -$as_echo "$ac_cv_path_EGREP" >&6; } - EGREP="$ac_cv_path_EGREP" - - -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for fgrep" >&5 -$as_echo_n "checking for fgrep... " >&6; } -if test "${ac_cv_path_FGREP+set}" = set; then : - $as_echo_n "(cached) " >&6 -else - if echo 'ab*c' | $GREP -F 'ab*c' >/dev/null 2>&1 - then ac_cv_path_FGREP="$GREP -F" - else - if test -z "$FGREP"; then - ac_path_FGREP_found=false - # Loop through the user's path and test for each of PROGNAME-LIST - as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_prog in fgrep; do - for ac_exec_ext in '' $ac_executable_extensions; do - ac_path_FGREP="$as_dir/$ac_prog$ac_exec_ext" - { test -f "$ac_path_FGREP" && $as_test_x "$ac_path_FGREP"; } || continue -# Check for GNU ac_path_FGREP and select it if it is found. - # Check for GNU $ac_path_FGREP -case `"$ac_path_FGREP" --version 2>&1` in -*GNU*) - ac_cv_path_FGREP="$ac_path_FGREP" ac_path_FGREP_found=:;; -*) - ac_count=0 - $as_echo_n 0123456789 >"conftest.in" - while : - do - cat "conftest.in" "conftest.in" >"conftest.tmp" - mv "conftest.tmp" "conftest.in" - cp "conftest.in" "conftest.nl" - $as_echo 'FGREP' >> "conftest.nl" - "$ac_path_FGREP" FGREP < "conftest.nl" >"conftest.out" 2>/dev/null || break - diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break - as_fn_arith $ac_count + 1 && ac_count=$as_val - if test $ac_count -gt ${ac_path_FGREP_max-0}; then - # Best one so far, save it but keep looking for a better one - ac_cv_path_FGREP="$ac_path_FGREP" - ac_path_FGREP_max=$ac_count - fi - # 10*(2^10) chars as input seems more than enough - test $ac_count -gt 10 && break - done - rm -f conftest.in conftest.tmp conftest.nl conftest.out;; -esac - - $ac_path_FGREP_found && break 3 - done - done - done -IFS=$as_save_IFS - if test -z "$ac_cv_path_FGREP"; then - as_fn_error "no acceptable fgrep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" "$LINENO" 5 - fi -else - ac_cv_path_FGREP=$FGREP -fi - - fi -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_FGREP" >&5 -$as_echo "$ac_cv_path_FGREP" >&6; } - FGREP="$ac_cv_path_FGREP" - - -test -z "$GREP" && GREP=grep - - - - - - - - - - - - - - - - - - - -# Check whether --with-gnu-ld was given. -if test "${with_gnu_ld+set}" = set; then : - withval=$with_gnu_ld; test "$withval" = no || with_gnu_ld=yes -else - with_gnu_ld=no -fi - -ac_prog=ld -if test "$GCC" = yes; then - # Check if gcc -print-prog-name=ld gives a path. - { $as_echo "$as_me:${as_lineno-$LINENO}: checking for ld used by $CC" >&5 -$as_echo_n "checking for ld used by $CC... " >&6; } - case $host in - *-*-mingw*) - # gcc leaves a trailing carriage return which upsets mingw - ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;; - *) - ac_prog=`($CC -print-prog-name=ld) 2>&5` ;; - esac - case $ac_prog in - # Accept absolute paths. - [\\/]* | ?:[\\/]*) - re_direlt='/[^/][^/]*/\.\./' - # Canonicalize the pathname of ld - ac_prog=`$ECHO "$ac_prog"| $SED 's%\\\\%/%g'` - while $ECHO "$ac_prog" | $GREP "$re_direlt" > /dev/null 2>&1; do - ac_prog=`$ECHO $ac_prog| $SED "s%$re_direlt%/%"` - done - test -z "$LD" && LD="$ac_prog" - ;; - "") - # If it fails, then pretend we aren't using GCC. - ac_prog=ld - ;; - *) - # If it is relative, then search for the first ld in PATH. - with_gnu_ld=unknown - ;; - esac -elif test "$with_gnu_ld" = yes; then - { $as_echo "$as_me:${as_lineno-$LINENO}: checking for GNU ld" >&5 -$as_echo_n "checking for GNU ld... " >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: checking for non-GNU ld" >&5 -$as_echo_n "checking for non-GNU ld... " >&6; } -fi -if test "${lt_cv_path_LD+set}" = set; then : - $as_echo_n "(cached) " >&6 -else - if test -z "$LD"; then - lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR - for ac_dir in $PATH; do - IFS="$lt_save_ifs" - test -z "$ac_dir" && ac_dir=. - if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then - lt_cv_path_LD="$ac_dir/$ac_prog" - # Check to see if the program is GNU ld. I'd rather use --version, - # but apparently some variants of GNU ld only accept -v. - # Break only if it was the GNU/non-GNU ld that we prefer. - case `"$lt_cv_path_LD" -v 2>&1 </dev/null` in - *GNU* | *'with BFD'*) - test "$with_gnu_ld" != no && break - ;; - *) - test "$with_gnu_ld" != yes && break - ;; - esac - fi - done - IFS="$lt_save_ifs" -else - lt_cv_path_LD="$LD" # Let the user override the test with a path. -fi -fi - -LD="$lt_cv_path_LD" -if test -n "$LD"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $LD" >&5 -$as_echo "$LD" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi -test -z "$LD" && as_fn_error "no acceptable ld found in \$PATH" "$LINENO" 5 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if the linker ($LD) is GNU ld" >&5 -$as_echo_n "checking if the linker ($LD) is GNU ld... " >&6; } -if test "${lt_cv_prog_gnu_ld+set}" = set; then : - $as_echo_n "(cached) " >&6 -else - # I'd rather use --version here, but apparently some GNU lds only accept -v. -case `$LD -v 2>&1 </dev/null` in -*GNU* | *'with BFD'*) - lt_cv_prog_gnu_ld=yes - ;; -*) - lt_cv_prog_gnu_ld=no - ;; -esac -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_gnu_ld" >&5 -$as_echo "$lt_cv_prog_gnu_ld" >&6; } -with_gnu_ld=$lt_cv_prog_gnu_ld - - - - - - - - - -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for BSD- or MS-compatible name lister (nm)" >&5 -$as_echo_n "checking for BSD- or MS-compatible name lister (nm)... " >&6; } -if test "${lt_cv_path_NM+set}" = set; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$NM"; then - # Let the user override the test. - lt_cv_path_NM="$NM" -else - lt_nm_to_check="${ac_tool_prefix}nm" - if test -n "$ac_tool_prefix" && test "$build" = "$host"; then - lt_nm_to_check="$lt_nm_to_check nm" - fi - for lt_tmp_nm in $lt_nm_to_check; do - lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR - for ac_dir in $PATH /usr/ccs/bin/elf /usr/ccs/bin /usr/ucb /bin; do - IFS="$lt_save_ifs" - test -z "$ac_dir" && ac_dir=. - tmp_nm="$ac_dir/$lt_tmp_nm" - if test -f "$tmp_nm" || test -f "$tmp_nm$ac_exeext" ; then - # Check to see if the nm accepts a BSD-compat flag. - # Adding the `sed 1q' prevents false positives on HP-UX, which says: - # nm: unknown option "B" ignored - # Tru64's nm complains that /dev/null is an invalid object file - case `"$tmp_nm" -B /dev/null 2>&1 | sed '1q'` in - */dev/null* | *'Invalid file or object type'*) - lt_cv_path_NM="$tmp_nm -B" - break - ;; - *) - case `"$tmp_nm" -p /dev/null 2>&1 | sed '1q'` in - */dev/null*) - lt_cv_path_NM="$tmp_nm -p" - break - ;; - *) - lt_cv_path_NM=${lt_cv_path_NM="$tmp_nm"} # keep the first match, but - continue # so that we can try to find one that supports BSD flags - ;; - esac - ;; - esac - fi - done - IFS="$lt_save_ifs" - done - : ${lt_cv_path_NM=no} -fi -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_path_NM" >&5 -$as_echo "$lt_cv_path_NM" >&6; } -if test "$lt_cv_path_NM" != "no"; then - NM="$lt_cv_path_NM" -else - # Didn't find any BSD compatible name lister, look for dumpbin. - if test -n "$ac_tool_prefix"; then - for ac_prog in "dumpbin -symbols" "link -dump -symbols" - do - # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args. -set dummy $ac_tool_prefix$ac_prog; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if test "${ac_cv_prog_DUMPBIN+set}" = set; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$DUMPBIN"; then - ac_cv_prog_DUMPBIN="$DUMPBIN" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_prog_DUMPBIN="$ac_tool_prefix$ac_prog" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -fi -fi -DUMPBIN=$ac_cv_prog_DUMPBIN -if test -n "$DUMPBIN"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $DUMPBIN" >&5 -$as_echo "$DUMPBIN" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - - test -n "$DUMPBIN" && break - done -fi -if test -z "$DUMPBIN"; then - ac_ct_DUMPBIN=$DUMPBIN - for ac_prog in "dumpbin -symbols" "link -dump -symbols" -do - # Extract the first word of "$ac_prog", so it can be a program name with args. -set dummy $ac_prog; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if test "${ac_cv_prog_ac_ct_DUMPBIN+set}" = set; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$ac_ct_DUMPBIN"; then - ac_cv_prog_ac_ct_DUMPBIN="$ac_ct_DUMPBIN" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_prog_ac_ct_DUMPBIN="$ac_prog" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -fi -fi -ac_ct_DUMPBIN=$ac_cv_prog_ac_ct_DUMPBIN -if test -n "$ac_ct_DUMPBIN"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_DUMPBIN" >&5 -$as_echo "$ac_ct_DUMPBIN" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - - test -n "$ac_ct_DUMPBIN" && break -done - - if test "x$ac_ct_DUMPBIN" = x; then - DUMPBIN=":" - else - case $cross_compiling:$ac_tool_warned in -yes:) -{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 -$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} -ac_tool_warned=yes ;; -esac - DUMPBIN=$ac_ct_DUMPBIN - fi -fi - - - if test "$DUMPBIN" != ":"; then - NM="$DUMPBIN" - fi -fi -test -z "$NM" && NM=nm - - - - - - -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking the name lister ($NM) interface" >&5 -$as_echo_n "checking the name lister ($NM) interface... " >&6; } -if test "${lt_cv_nm_interface+set}" = set; then : - $as_echo_n "(cached) " >&6 -else - lt_cv_nm_interface="BSD nm" - echo "int some_variable = 0;" > conftest.$ac_ext - (eval echo "\"\$as_me:4810: $ac_compile\"" >&5) - (eval "$ac_compile" 2>conftest.err) - cat conftest.err >&5 - (eval echo "\"\$as_me:4813: $NM \\\"conftest.$ac_objext\\\"\"" >&5) - (eval "$NM \"conftest.$ac_objext\"" 2>conftest.err > conftest.out) - cat conftest.err >&5 - (eval echo "\"\$as_me:4816: output\"" >&5) - cat conftest.out >&5 - if $GREP 'External.*some_variable' conftest.out > /dev/null; then - lt_cv_nm_interface="MS dumpbin" - fi - rm -f conftest* -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_nm_interface" >&5 -$as_echo "$lt_cv_nm_interface" >&6; } - -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether ln -s works" >&5 -$as_echo_n "checking whether ln -s works... " >&6; } -LN_S=$as_ln_s -if test "$LN_S" = "ln -s"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 -$as_echo "yes" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no, using $LN_S" >&5 -$as_echo "no, using $LN_S" >&6; } -fi - -# find the maximum length of command line arguments -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking the maximum length of command line arguments" >&5 -$as_echo_n "checking the maximum length of command line arguments... " >&6; } -if test "${lt_cv_sys_max_cmd_len+set}" = set; then : - $as_echo_n "(cached) " >&6 -else - i=0 - teststring="ABCD" - - case $build_os in - msdosdjgpp*) - # On DJGPP, this test can blow up pretty badly due to problems in libc - # (any single argument exceeding 2000 bytes causes a buffer overrun - # during glob expansion). Even if it were fixed, the result of this - # check would be larger than it should be. - lt_cv_sys_max_cmd_len=12288; # 12K is about right - ;; - - gnu*) - # Under GNU Hurd, this test is not required because there is - # no limit to the length of command line arguments. - # Libtool will interpret -1 as no limit whatsoever - lt_cv_sys_max_cmd_len=-1; - ;; - - cygwin* | mingw* | cegcc*) - # On Win9x/ME, this test blows up -- it succeeds, but takes - # about 5 minutes as the teststring grows exponentially. - # Worse, since 9x/ME are not pre-emptively multitasking, - # you end up with a "frozen" computer, even though with patience - # the test eventually succeeds (with a max line length of 256k). - # Instead, let's just punt: use the minimum linelength reported by - # all of the supported platforms: 8192 (on NT/2K/XP). - lt_cv_sys_max_cmd_len=8192; - ;; - - amigaos*) - # On AmigaOS with pdksh, this test takes hours, literally. - # So we just punt and use a minimum line length of 8192. - lt_cv_sys_max_cmd_len=8192; - ;; - - netbsd* | freebsd* | openbsd* | darwin* | dragonfly*) - # This has been around since 386BSD, at least. Likely further. - if test -x /sbin/sysctl; then - lt_cv_sys_max_cmd_len=`/sbin/sysctl -n kern.argmax` - elif test -x /usr/sbin/sysctl; then - lt_cv_sys_max_cmd_len=`/usr/sbin/sysctl -n kern.argmax` - else - lt_cv_sys_max_cmd_len=65536 # usable default for all BSDs - fi - # And add a safety zone - lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4` - lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3` - ;; - - interix*) - # We know the value 262144 and hardcode it with a safety zone (like BSD) - lt_cv_sys_max_cmd_len=196608 - ;; - - osf*) - # Dr. Hans Ekkehard Plesser reports seeing a kernel panic running configure - # due to this test when exec_disable_arg_limit is 1 on Tru64. It is not - # nice to cause kernel panics so lets avoid the loop below. - # First set a reasonable default. - lt_cv_sys_max_cmd_len=16384 - # - if test -x /sbin/sysconfig; then - case `/sbin/sysconfig -q proc exec_disable_arg_limit` in - *1*) lt_cv_sys_max_cmd_len=-1 ;; - esac - fi - ;; - sco3.2v5*) - lt_cv_sys_max_cmd_len=102400 - ;; - sysv5* | sco5v6* | sysv4.2uw2*) - kargmax=`grep ARG_MAX /etc/conf/cf.d/stune 2>/dev/null` - if test -n "$kargmax"; then - lt_cv_sys_max_cmd_len=`echo $kargmax | sed 's/.*[ ]//'` - else - lt_cv_sys_max_cmd_len=32768 - fi - ;; - *) - lt_cv_sys_max_cmd_len=`(getconf ARG_MAX) 2> /dev/null` - if test -n "$lt_cv_sys_max_cmd_len"; then - lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4` - lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3` - else - # Make teststring a little bigger before we do anything with it. - # a 1K string should be a reasonable start. - for i in 1 2 3 4 5 6 7 8 ; do - teststring=$teststring$teststring - done - SHELL=${SHELL-${CONFIG_SHELL-/bin/sh}} - # If test is not a shell built-in, we'll probably end up computing a - # maximum length that is only half of the actual maximum length, but - # we can't tell. - while { test "X"`$SHELL $0 --fallback-echo "X$teststring$teststring" 2>/dev/null` \ - = "XX$teststring$teststring"; } >/dev/null 2>&1 && - test $i != 17 # 1/2 MB should be enough - do - i=`expr $i + 1` - teststring=$teststring$teststring - done - # Only check the string length outside the loop. - lt_cv_sys_max_cmd_len=`expr "X$teststring" : ".*" 2>&1` - teststring= - # Add a significant safety factor because C++ compilers can tack on - # massive amounts of additional arguments before passing them to the - # linker. It appears as though 1/2 is a usable value. - lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 2` - fi - ;; - esac - -fi - -if test -n $lt_cv_sys_max_cmd_len ; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_sys_max_cmd_len" >&5 -$as_echo "$lt_cv_sys_max_cmd_len" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: none" >&5 -$as_echo "none" >&6; } -fi -max_cmd_len=$lt_cv_sys_max_cmd_len - - - - - - -: ${CP="cp -f"} -: ${MV="mv -f"} -: ${RM="rm -f"} - -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the shell understands some XSI constructs" >&5 -$as_echo_n "checking whether the shell understands some XSI constructs... " >&6; } -# Try some XSI features -xsi_shell=no -( _lt_dummy="a/b/c" - test "${_lt_dummy##*/},${_lt_dummy%/*},"${_lt_dummy%"$_lt_dummy"}, \ - = c,a/b,, \ - && eval 'test $(( 1 + 1 )) -eq 2 \ - && test "${#_lt_dummy}" -eq 5' ) >/dev/null 2>&1 \ - && xsi_shell=yes -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $xsi_shell" >&5 -$as_echo "$xsi_shell" >&6; } - - -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the shell understands \"+=\"" >&5 -$as_echo_n "checking whether the shell understands \"+=\"... " >&6; } -lt_shell_append=no -( foo=bar; set foo baz; eval "$1+=\$2" && test "$foo" = barbaz ) \ - >/dev/null 2>&1 \ - && lt_shell_append=yes -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_shell_append" >&5 -$as_echo "$lt_shell_append" >&6; } - - -if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then - lt_unset=unset -else - lt_unset=false -fi - - - - - -# test EBCDIC or ASCII -case `echo X|tr X '\101'` in - A) # ASCII based system - # \n is not interpreted correctly by Solaris 8 /usr/ucb/tr - lt_SP2NL='tr \040 \012' - lt_NL2SP='tr \015\012 \040\040' - ;; - *) # EBCDIC based system - lt_SP2NL='tr \100 \n' - lt_NL2SP='tr \r\n \100\100' - ;; -esac - - - - - - - - - -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $LD option to reload object files" >&5 -$as_echo_n "checking for $LD option to reload object files... " >&6; } -if test "${lt_cv_ld_reload_flag+set}" = set; then : - $as_echo_n "(cached) " >&6 -else - lt_cv_ld_reload_flag='-r' -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_ld_reload_flag" >&5 -$as_echo "$lt_cv_ld_reload_flag" >&6; } -reload_flag=$lt_cv_ld_reload_flag -case $reload_flag in -"" | " "*) ;; -*) reload_flag=" $reload_flag" ;; -esac -reload_cmds='$LD$reload_flag -o $output$reload_objs' -case $host_os in - darwin*) - if test "$GCC" = yes; then - reload_cmds='$LTCC $LTCFLAGS -nostdlib ${wl}-r -o $output$reload_objs' - else - reload_cmds='$LD$reload_flag -o $output$reload_objs' - fi - ;; -esac - - - - - - - - - -if test -n "$ac_tool_prefix"; then - # Extract the first word of "${ac_tool_prefix}objdump", so it can be a program name with args. -set dummy ${ac_tool_prefix}objdump; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if test "${ac_cv_prog_OBJDUMP+set}" = set; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$OBJDUMP"; then - ac_cv_prog_OBJDUMP="$OBJDUMP" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_prog_OBJDUMP="${ac_tool_prefix}objdump" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -fi -fi -OBJDUMP=$ac_cv_prog_OBJDUMP -if test -n "$OBJDUMP"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $OBJDUMP" >&5 -$as_echo "$OBJDUMP" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - -fi -if test -z "$ac_cv_prog_OBJDUMP"; then - ac_ct_OBJDUMP=$OBJDUMP - # Extract the first word of "objdump", so it can be a program name with args. -set dummy objdump; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if test "${ac_cv_prog_ac_ct_OBJDUMP+set}" = set; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$ac_ct_OBJDUMP"; then - ac_cv_prog_ac_ct_OBJDUMP="$ac_ct_OBJDUMP" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_prog_ac_ct_OBJDUMP="objdump" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -fi -fi -ac_ct_OBJDUMP=$ac_cv_prog_ac_ct_OBJDUMP -if test -n "$ac_ct_OBJDUMP"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_OBJDUMP" >&5 -$as_echo "$ac_ct_OBJDUMP" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - if test "x$ac_ct_OBJDUMP" = x; then - OBJDUMP="false" - else - case $cross_compiling:$ac_tool_warned in -yes:) -{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 -$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} -ac_tool_warned=yes ;; -esac - OBJDUMP=$ac_ct_OBJDUMP - fi -else - OBJDUMP="$ac_cv_prog_OBJDUMP" -fi - -test -z "$OBJDUMP" && OBJDUMP=objdump - - - - - - - - - -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to recognize dependent libraries" >&5 -$as_echo_n "checking how to recognize dependent libraries... " >&6; } -if test "${lt_cv_deplibs_check_method+set}" = set; then : - $as_echo_n "(cached) " >&6 -else - lt_cv_file_magic_cmd='$MAGIC_CMD' -lt_cv_file_magic_test_file= -lt_cv_deplibs_check_method='unknown' -# Need to set the preceding variable on all platforms that support -# interlibrary dependencies. -# 'none' -- dependencies not supported. -# `unknown' -- same as none, but documents that we really don't know. -# 'pass_all' -- all dependencies passed with no checks. -# 'test_compile' -- check by making test program. -# 'file_magic [[regex]]' -- check by looking for files in library path -# which responds to the $file_magic_cmd with a given extended regex. -# If you have `file' or equivalent on your system and you're not sure -# whether `pass_all' will *always* work, you probably want this one. - -case $host_os in -aix[4-9]*) - lt_cv_deplibs_check_method=pass_all - ;; - -beos*) - lt_cv_deplibs_check_method=pass_all - ;; - -bsdi[45]*) - lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (shared object|dynamic lib)' - lt_cv_file_magic_cmd='/usr/bin/file -L' - lt_cv_file_magic_test_file=/shlib/libc.so - ;; - -cygwin*) - # func_win32_libid is a shell function defined in ltmain.sh - lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL' - lt_cv_file_magic_cmd='func_win32_libid' - ;; - -mingw* | pw32*) - # Base MSYS/MinGW do not provide the 'file' command needed by - # func_win32_libid shell function, so use a weaker test based on 'objdump', - # unless we find 'file', for example because we are cross-compiling. - if ( file / ) >/dev/null 2>&1; then - lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL' - lt_cv_file_magic_cmd='func_win32_libid' - else - lt_cv_deplibs_check_method='file_magic file format pei*-i386(.*architecture: i386)?' - lt_cv_file_magic_cmd='$OBJDUMP -f' - fi - ;; - -cegcc) - # use the weaker test based on 'objdump'. See mingw*. - lt_cv_deplibs_check_method='file_magic file format pe-arm-.*little(.*architecture: arm)?' - lt_cv_file_magic_cmd='$OBJDUMP -f' - ;; - -darwin* | rhapsody*) - lt_cv_deplibs_check_method=pass_all - ;; - -freebsd* | dragonfly*) - if echo __ELF__ | $CC -E - | $GREP __ELF__ > /dev/null; then - case $host_cpu in - i*86 ) - # Not sure whether the presence of OpenBSD here was a mistake. - # Let's accept both of them until this is cleared up. - lt_cv_deplibs_check_method='file_magic (FreeBSD|OpenBSD|DragonFly)/i[3-9]86 (compact )?demand paged shared library' - lt_cv_file_magic_cmd=/usr/bin/file - lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*` - ;; - esac - else - lt_cv_deplibs_check_method=pass_all - fi - ;; - -gnu*) - lt_cv_deplibs_check_method=pass_all - ;; - -hpux10.20* | hpux11*) - lt_cv_file_magic_cmd=/usr/bin/file - case $host_cpu in - ia64*) - lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|ELF-[0-9][0-9]) shared object file - IA64' - lt_cv_file_magic_test_file=/usr/lib/hpux32/libc.so - ;; - hppa*64*) - lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|ELF-[0-9][0-9]) shared object file - PA-RISC [0-9].[0-9]' - lt_cv_file_magic_test_file=/usr/lib/pa20_64/libc.sl - ;; - *) - lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|PA-RISC[0-9].[0-9]) shared library' - lt_cv_file_magic_test_file=/usr/lib/libc.sl - ;; - esac - ;; - -interix[3-9]*) - # PIC code is broken on Interix 3.x, that's why |\.a not |_pic\.a here - lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so|\.a)$' - ;; - -irix5* | irix6* | nonstopux*) - case $LD in - *-32|*"-32 ") libmagic=32-bit;; - *-n32|*"-n32 ") libmagic=N32;; - *-64|*"-64 ") libmagic=64-bit;; - *) libmagic=never-match;; - esac - lt_cv_deplibs_check_method=pass_all - ;; - -# This must be Linux ELF. -linux* | k*bsd*-gnu) - lt_cv_deplibs_check_method=pass_all - ;; - -netbsd*) - if echo __ELF__ | $CC -E - | $GREP __ELF__ > /dev/null; then - lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so\.[0-9]+\.[0-9]+|_pic\.a)$' - else - lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so|_pic\.a)$' - fi - ;; - -newos6*) - lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (executable|dynamic lib)' - lt_cv_file_magic_cmd=/usr/bin/file - lt_cv_file_magic_test_file=/usr/lib/libnls.so - ;; - -*nto* | *qnx*) - lt_cv_deplibs_check_method=pass_all - ;; - -openbsd*) - if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then - lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so\.[0-9]+\.[0-9]+|\.so|_pic\.a)$' - else - lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so\.[0-9]+\.[0-9]+|_pic\.a)$' - fi - ;; - -osf3* | osf4* | osf5*) - lt_cv_deplibs_check_method=pass_all - ;; - -rdos*) - lt_cv_deplibs_check_method=pass_all - ;; - -solaris*) - lt_cv_deplibs_check_method=pass_all - ;; - -sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*) - lt_cv_deplibs_check_method=pass_all - ;; - -sysv4 | sysv4.3*) - case $host_vendor in - motorola) - lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (shared object|dynamic lib) M[0-9][0-9]* Version [0-9]' - lt_cv_file_magic_test_file=`echo /usr/lib/libc.so*` - ;; - ncr) - lt_cv_deplibs_check_method=pass_all - ;; - sequent) - lt_cv_file_magic_cmd='/bin/file' - lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [LM]SB (shared object|dynamic lib )' - ;; - sni) - lt_cv_file_magic_cmd='/bin/file' - lt_cv_deplibs_check_method="file_magic ELF [0-9][0-9]*-bit [LM]SB dynamic lib" - lt_cv_file_magic_test_file=/lib/libc.so - ;; - siemens) - lt_cv_deplibs_check_method=pass_all - ;; - pc) - lt_cv_deplibs_check_method=pass_all - ;; - esac - ;; - -tpf*) - lt_cv_deplibs_check_method=pass_all - ;; -esac - -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_deplibs_check_method" >&5 -$as_echo "$lt_cv_deplibs_check_method" >&6; } -file_magic_cmd=$lt_cv_file_magic_cmd -deplibs_check_method=$lt_cv_deplibs_check_method -test -z "$deplibs_check_method" && deplibs_check_method=unknown - - - - - - - - - - - - -if test -n "$ac_tool_prefix"; then - # Extract the first word of "${ac_tool_prefix}ar", so it can be a program name with args. -set dummy ${ac_tool_prefix}ar; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if test "${ac_cv_prog_AR+set}" = set; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$AR"; then - ac_cv_prog_AR="$AR" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_prog_AR="${ac_tool_prefix}ar" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -fi -fi -AR=$ac_cv_prog_AR -if test -n "$AR"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $AR" >&5 -$as_echo "$AR" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - -fi -if test -z "$ac_cv_prog_AR"; then - ac_ct_AR=$AR - # Extract the first word of "ar", so it can be a program name with args. -set dummy ar; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if test "${ac_cv_prog_ac_ct_AR+set}" = set; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$ac_ct_AR"; then - ac_cv_prog_ac_ct_AR="$ac_ct_AR" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_prog_ac_ct_AR="ar" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -fi -fi -ac_ct_AR=$ac_cv_prog_ac_ct_AR -if test -n "$ac_ct_AR"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_AR" >&5 -$as_echo "$ac_ct_AR" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - if test "x$ac_ct_AR" = x; then - AR="false" - else - case $cross_compiling:$ac_tool_warned in -yes:) -{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 -$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} -ac_tool_warned=yes ;; -esac - AR=$ac_ct_AR - fi -else - AR="$ac_cv_prog_AR" -fi - -test -z "$AR" && AR=ar -test -z "$AR_FLAGS" && AR_FLAGS=cru - - - - - - - - - - - -if test -n "$ac_tool_prefix"; then - # Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args. -set dummy ${ac_tool_prefix}strip; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if test "${ac_cv_prog_STRIP+set}" = set; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$STRIP"; then - ac_cv_prog_STRIP="$STRIP" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_prog_STRIP="${ac_tool_prefix}strip" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -fi -fi -STRIP=$ac_cv_prog_STRIP -if test -n "$STRIP"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $STRIP" >&5 -$as_echo "$STRIP" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - -fi -if test -z "$ac_cv_prog_STRIP"; then - ac_ct_STRIP=$STRIP - # Extract the first word of "strip", so it can be a program name with args. -set dummy strip; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if test "${ac_cv_prog_ac_ct_STRIP+set}" = set; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$ac_ct_STRIP"; then - ac_cv_prog_ac_ct_STRIP="$ac_ct_STRIP" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_prog_ac_ct_STRIP="strip" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -fi -fi -ac_ct_STRIP=$ac_cv_prog_ac_ct_STRIP -if test -n "$ac_ct_STRIP"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_STRIP" >&5 -$as_echo "$ac_ct_STRIP" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - if test "x$ac_ct_STRIP" = x; then - STRIP=":" - else - case $cross_compiling:$ac_tool_warned in -yes:) -{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 -$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} -ac_tool_warned=yes ;; -esac - STRIP=$ac_ct_STRIP - fi -else - STRIP="$ac_cv_prog_STRIP" -fi - -test -z "$STRIP" && STRIP=: - - - - - - -if test -n "$ac_tool_prefix"; then - # Extract the first word of "${ac_tool_prefix}ranlib", so it can be a program name with args. -set dummy ${ac_tool_prefix}ranlib; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if test "${ac_cv_prog_RANLIB+set}" = set; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$RANLIB"; then - ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_prog_RANLIB="${ac_tool_prefix}ranlib" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -fi -fi -RANLIB=$ac_cv_prog_RANLIB -if test -n "$RANLIB"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $RANLIB" >&5 -$as_echo "$RANLIB" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - -fi -if test -z "$ac_cv_prog_RANLIB"; then - ac_ct_RANLIB=$RANLIB - # Extract the first word of "ranlib", so it can be a program name with args. -set dummy ranlib; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if test "${ac_cv_prog_ac_ct_RANLIB+set}" = set; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$ac_ct_RANLIB"; then - ac_cv_prog_ac_ct_RANLIB="$ac_ct_RANLIB" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_prog_ac_ct_RANLIB="ranlib" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -fi -fi -ac_ct_RANLIB=$ac_cv_prog_ac_ct_RANLIB -if test -n "$ac_ct_RANLIB"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_RANLIB" >&5 -$as_echo "$ac_ct_RANLIB" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - if test "x$ac_ct_RANLIB" = x; then - RANLIB=":" - else - case $cross_compiling:$ac_tool_warned in -yes:) -{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 -$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} -ac_tool_warned=yes ;; -esac - RANLIB=$ac_ct_RANLIB - fi -else - RANLIB="$ac_cv_prog_RANLIB" -fi - -test -z "$RANLIB" && RANLIB=: - - - - - - -# Determine commands to create old-style static archives. -old_archive_cmds='$AR $AR_FLAGS $oldlib$oldobjs' -old_postinstall_cmds='chmod 644 $oldlib' -old_postuninstall_cmds= - -if test -n "$RANLIB"; then - case $host_os in - openbsd*) - old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB -t \$oldlib" - ;; - *) - old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB \$oldlib" - ;; - esac - old_archive_cmds="$old_archive_cmds~\$RANLIB \$oldlib" -fi - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -# If no C compiler was specified, use CC. -LTCC=${LTCC-"$CC"} - -# If no C compiler flags were specified, use CFLAGS. -LTCFLAGS=${LTCFLAGS-"$CFLAGS"} - -# Allow CC to be a program name with arguments. -compiler=$CC - - -# Check for command to grab the raw symbol name followed by C symbol from nm. -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking command to parse $NM output from $compiler object" >&5 -$as_echo_n "checking command to parse $NM output from $compiler object... " >&6; } -if test "${lt_cv_sys_global_symbol_pipe+set}" = set; then : - $as_echo_n "(cached) " >&6 -else - -# These are sane defaults that work on at least a few old systems. -# [They come from Ultrix. What could be older than Ultrix?!! ;)] - -# Character class describing NM global symbol codes. -symcode='[BCDEGRST]' - -# Regexp to match symbols that can be accessed directly from C. -sympat='\([_A-Za-z][_A-Za-z0-9]*\)' - -# Define system-specific variables. -case $host_os in -aix*) - symcode='[BCDT]' - ;; -cygwin* | mingw* | pw32* | cegcc*) - symcode='[ABCDGISTW]' - ;; -hpux*) - if test "$host_cpu" = ia64; then - symcode='[ABCDEGRST]' - fi - ;; -irix* | nonstopux*) - symcode='[BCDEGRST]' - ;; -osf*) - symcode='[BCDEGQRST]' - ;; -solaris*) - symcode='[BDRT]' - ;; -sco3.2v5*) - symcode='[DT]' - ;; -sysv4.2uw2*) - symcode='[DT]' - ;; -sysv5* | sco5v6* | unixware* | OpenUNIX*) - symcode='[ABDT]' - ;; -sysv4) - symcode='[DFNSTU]' - ;; -esac - -# If we're using GNU nm, then use its standard symbol codes. -case `$NM -V 2>&1` in -*GNU* | *'with BFD'*) - symcode='[ABCDGIRSTW]' ;; -esac - -# Transform an extracted symbol line into a proper C declaration. -# Some systems (esp. on ia64) link data and code symbols differently, -# so use this general approach. -lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern int \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'" - -# Transform an extracted symbol line into symbol name and symbol address -lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([^ ]*\) $/ {\\\"\1\\\", (void *) 0},/p' -e 's/^$symcode* \([^ ]*\) \([^ ]*\)$/ {\"\2\", (void *) \&\2},/p'" -lt_cv_sys_global_symbol_to_c_name_address_lib_prefix="sed -n -e 's/^: \([^ ]*\) $/ {\\\"\1\\\", (void *) 0},/p' -e 's/^$symcode* \([^ ]*\) \(lib[^ ]*\)$/ {\"\2\", (void *) \&\2},/p' -e 's/^$symcode* \([^ ]*\) \([^ ]*\)$/ {\"lib\2\", (void *) \&\2},/p'" - -# Handle CRLF in mingw tool chain -opt_cr= -case $build_os in -mingw*) - opt_cr=`$ECHO 'x\{0,1\}' | tr x '\015'` # option cr in regexp - ;; -esac - -# Try without a prefix underscore, then with it. -for ac_symprfx in "" "_"; do - - # Transform symcode, sympat, and symprfx into a raw symbol and a C symbol. - symxfrm="\\1 $ac_symprfx\\2 \\2" - - # Write the raw and C identifiers. - if test "$lt_cv_nm_interface" = "MS dumpbin"; then - # Fake it for dumpbin and say T for any non-static function - # and D for any global variable. - # Also find C++ and __fastcall symbols from MSVC++, - # which start with @ or ?. - lt_cv_sys_global_symbol_pipe="$AWK '"\ -" {last_section=section; section=\$ 3};"\ -" /Section length .*#relocs.*(pick any)/{hide[last_section]=1};"\ -" \$ 0!~/External *\|/{next};"\ -" / 0+ UNDEF /{next}; / UNDEF \([^|]\)*()/{next};"\ -" {if(hide[section]) next};"\ -" {f=0}; \$ 0~/\(\).*\|/{f=1}; {printf f ? \"T \" : \"D \"};"\ -" {split(\$ 0, a, /\||\r/); split(a[2], s)};"\ -" s[1]~/^[@?]/{print s[1], s[1]; next};"\ -" s[1]~prfx {split(s[1],t,\"@\"); print t[1], substr(t[1],length(prfx))}"\ -" ' prfx=^$ac_symprfx" - else - lt_cv_sys_global_symbol_pipe="sed -n -e 's/^.*[ ]\($symcode$symcode*\)[ ][ ]*$ac_symprfx$sympat$opt_cr$/$symxfrm/p'" - fi - - # Check to see that the pipe works correctly. - pipe_works=no - - rm -f conftest* - cat > conftest.$ac_ext <<_LT_EOF -#ifdef __cplusplus -extern "C" { -#endif -char nm_test_var; -void nm_test_func(void); -void nm_test_func(void){} -#ifdef __cplusplus -} -#endif -int main(){nm_test_var='a';nm_test_func();return(0);} -_LT_EOF - - if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5 - (eval $ac_compile) 2>&5 - ac_status=$? - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; }; then - # Now try to grab the symbols. - nlist=conftest.nm - if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$NM conftest.$ac_objext \| $lt_cv_sys_global_symbol_pipe \> $nlist\""; } >&5 - (eval $NM conftest.$ac_objext \| $lt_cv_sys_global_symbol_pipe \> $nlist) 2>&5 - ac_status=$? - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; } && test -s "$nlist"; then - # Try sorting and uniquifying the output. - if sort "$nlist" | uniq > "$nlist"T; then - mv -f "$nlist"T "$nlist" - else - rm -f "$nlist"T - fi - - # Make sure that we snagged all the symbols we need. - if $GREP ' nm_test_var$' "$nlist" >/dev/null; then - if $GREP ' nm_test_func$' "$nlist" >/dev/null; then - cat <<_LT_EOF > conftest.$ac_ext -#ifdef __cplusplus -extern "C" { -#endif - -_LT_EOF - # Now generate the symbol file. - eval "$lt_cv_sys_global_symbol_to_cdecl"' < "$nlist" | $GREP -v main >> conftest.$ac_ext' - - cat <<_LT_EOF >> conftest.$ac_ext - -/* The mapping between symbol names and symbols. */ -const struct { - const char *name; - void *address; -} -lt__PROGRAM__LTX_preloaded_symbols[] = -{ - { "@PROGRAM@", (void *) 0 }, -_LT_EOF - $SED "s/^$symcode$symcode* \(.*\) \(.*\)$/ {\"\2\", (void *) \&\2},/" < "$nlist" | $GREP -v main >> conftest.$ac_ext - cat <<\_LT_EOF >> conftest.$ac_ext - {0, (void *) 0} -}; - -/* This works around a problem in FreeBSD linker */ -#ifdef FREEBSD_WORKAROUND -static const void *lt_preloaded_setup() { - return lt__PROGRAM__LTX_preloaded_symbols; -} -#endif - -#ifdef __cplusplus -} -#endif -_LT_EOF - # Now try linking the two files. - mv conftest.$ac_objext conftstm.$ac_objext - lt_save_LIBS="$LIBS" - lt_save_CFLAGS="$CFLAGS" - LIBS="conftstm.$ac_objext" - CFLAGS="$CFLAGS$lt_prog_compiler_no_builtin_flag" - if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_link\""; } >&5 - (eval $ac_link) 2>&5 - ac_status=$? - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; } && test -s conftest${ac_exeext}; then - pipe_works=yes - fi - LIBS="$lt_save_LIBS" - CFLAGS="$lt_save_CFLAGS" - else - echo "cannot find nm_test_func in $nlist" >&5 - fi - else - echo "cannot find nm_test_var in $nlist" >&5 - fi - else - echo "cannot run $lt_cv_sys_global_symbol_pipe" >&5 - fi - else - echo "$progname: failed program was:" >&5 - cat conftest.$ac_ext >&5 - fi - rm -rf conftest* conftst* - - # Do not use the global_symbol_pipe unless it works. - if test "$pipe_works" = yes; then - break - else - lt_cv_sys_global_symbol_pipe= - fi -done - -fi - -if test -z "$lt_cv_sys_global_symbol_pipe"; then - lt_cv_sys_global_symbol_to_cdecl= -fi -if test -z "$lt_cv_sys_global_symbol_pipe$lt_cv_sys_global_symbol_to_cdecl"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: failed" >&5 -$as_echo "failed" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: ok" >&5 -$as_echo "ok" >&6; } -fi - - - - - - - - - - - - - - - - - - - - - - - -# Check whether --enable-libtool-lock was given. -if test "${enable_libtool_lock+set}" = set; then : - enableval=$enable_libtool_lock; -fi - -test "x$enable_libtool_lock" != xno && enable_libtool_lock=yes - -# Some flags need to be propagated to the compiler or linker for good -# libtool support. -case $host in -ia64-*-hpux*) - # Find out which ABI we are using. - echo 'int i;' > conftest.$ac_ext - if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5 - (eval $ac_compile) 2>&5 - ac_status=$? - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; }; then - case `/usr/bin/file conftest.$ac_objext` in - *ELF-32*) - HPUX_IA64_MODE="32" - ;; - *ELF-64*) - HPUX_IA64_MODE="64" - ;; - esac - fi - rm -rf conftest* - ;; -*-*-irix6*) - # Find out which ABI we are using. - echo '#line 6022 "configure"' > conftest.$ac_ext - if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5 - (eval $ac_compile) 2>&5 - ac_status=$? - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; }; then - if test "$lt_cv_prog_gnu_ld" = yes; then - case `/usr/bin/file conftest.$ac_objext` in - *32-bit*) - LD="${LD-ld} -melf32bsmip" - ;; - *N32*) - LD="${LD-ld} -melf32bmipn32" - ;; - *64-bit*) - LD="${LD-ld} -melf64bmip" - ;; - esac - else - case `/usr/bin/file conftest.$ac_objext` in - *32-bit*) - LD="${LD-ld} -32" - ;; - *N32*) - LD="${LD-ld} -n32" - ;; - *64-bit*) - LD="${LD-ld} -64" - ;; - esac - fi - fi - rm -rf conftest* - ;; - -x86_64-*kfreebsd*-gnu|x86_64-*linux*|ppc*-*linux*|powerpc*-*linux*| \ -s390*-*linux*|s390*-*tpf*|sparc*-*linux*) - # Find out which ABI we are using. - echo 'int i;' > conftest.$ac_ext - if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5 - (eval $ac_compile) 2>&5 - ac_status=$? - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; }; then - case `/usr/bin/file conftest.o` in - *32-bit*) - case $host in - x86_64-*kfreebsd*-gnu) - LD="${LD-ld} -m elf_i386_fbsd" - ;; - x86_64-*linux*) - LD="${LD-ld} -m elf_i386" - ;; - ppc64-*linux*|powerpc64-*linux*) - LD="${LD-ld} -m elf32ppclinux" - ;; - s390x-*linux*) - LD="${LD-ld} -m elf_s390" - ;; - sparc64-*linux*) - LD="${LD-ld} -m elf32_sparc" - ;; - esac - ;; - *64-bit*) - case $host in - x86_64-*kfreebsd*-gnu) - LD="${LD-ld} -m elf_x86_64_fbsd" - ;; - x86_64-*linux*) - LD="${LD-ld} -m elf_x86_64" - ;; - ppc*-*linux*|powerpc*-*linux*) - LD="${LD-ld} -m elf64ppc" - ;; - s390*-*linux*|s390*-*tpf*) - LD="${LD-ld} -m elf64_s390" - ;; - sparc*-*linux*) - LD="${LD-ld} -m elf64_sparc" - ;; - esac - ;; - esac - fi - rm -rf conftest* - ;; - -*-*-sco3.2v5*) - # On SCO OpenServer 5, we need -belf to get full-featured binaries. - SAVE_CFLAGS="$CFLAGS" - CFLAGS="$CFLAGS -belf" - { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the C compiler needs -belf" >&5 -$as_echo_n "checking whether the C compiler needs -belf... " >&6; } -if test "${lt_cv_cc_needs_belf+set}" = set; then : - $as_echo_n "(cached) " >&6 -else - ac_ext=c -ac_cpp='$CPP $CPPFLAGS' -ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' -ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_c_compiler_gnu - - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - -int -main () -{ - - ; - return 0; -} -_ACEOF -if ac_fn_c_try_link "$LINENO"; then : - lt_cv_cc_needs_belf=yes -else - lt_cv_cc_needs_belf=no -fi -rm -f core conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext - ac_ext=c -ac_cpp='$CPP $CPPFLAGS' -ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' -ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_c_compiler_gnu - -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_cc_needs_belf" >&5 -$as_echo "$lt_cv_cc_needs_belf" >&6; } - if test x"$lt_cv_cc_needs_belf" != x"yes"; then - # this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf - CFLAGS="$SAVE_CFLAGS" - fi - ;; -sparc*-*solaris*) - # Find out which ABI we are using. - echo 'int i;' > conftest.$ac_ext - if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5 - (eval $ac_compile) 2>&5 - ac_status=$? - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; }; then - case `/usr/bin/file conftest.o` in - *64-bit*) - case $lt_cv_prog_gnu_ld in - yes*) LD="${LD-ld} -m elf64_sparc" ;; - *) - if ${LD-ld} -64 -r -o conftest2.o conftest.o >/dev/null 2>&1; then - LD="${LD-ld} -64" - fi - ;; - esac - ;; - esac - fi - rm -rf conftest* - ;; -esac - -need_locks="$enable_libtool_lock" - - - case $host_os in - rhapsody* | darwin*) - if test -n "$ac_tool_prefix"; then - # Extract the first word of "${ac_tool_prefix}dsymutil", so it can be a program name with args. -set dummy ${ac_tool_prefix}dsymutil; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if test "${ac_cv_prog_DSYMUTIL+set}" = set; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$DSYMUTIL"; then - ac_cv_prog_DSYMUTIL="$DSYMUTIL" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_prog_DSYMUTIL="${ac_tool_prefix}dsymutil" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -fi -fi -DSYMUTIL=$ac_cv_prog_DSYMUTIL -if test -n "$DSYMUTIL"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $DSYMUTIL" >&5 -$as_echo "$DSYMUTIL" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - -fi -if test -z "$ac_cv_prog_DSYMUTIL"; then - ac_ct_DSYMUTIL=$DSYMUTIL - # Extract the first word of "dsymutil", so it can be a program name with args. -set dummy dsymutil; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if test "${ac_cv_prog_ac_ct_DSYMUTIL+set}" = set; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$ac_ct_DSYMUTIL"; then - ac_cv_prog_ac_ct_DSYMUTIL="$ac_ct_DSYMUTIL" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_prog_ac_ct_DSYMUTIL="dsymutil" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -fi -fi -ac_ct_DSYMUTIL=$ac_cv_prog_ac_ct_DSYMUTIL -if test -n "$ac_ct_DSYMUTIL"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_DSYMUTIL" >&5 -$as_echo "$ac_ct_DSYMUTIL" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - if test "x$ac_ct_DSYMUTIL" = x; then - DSYMUTIL=":" - else - case $cross_compiling:$ac_tool_warned in -yes:) -{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 -$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} -ac_tool_warned=yes ;; -esac - DSYMUTIL=$ac_ct_DSYMUTIL - fi -else - DSYMUTIL="$ac_cv_prog_DSYMUTIL" -fi - - if test -n "$ac_tool_prefix"; then - # Extract the first word of "${ac_tool_prefix}nmedit", so it can be a program name with args. -set dummy ${ac_tool_prefix}nmedit; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if test "${ac_cv_prog_NMEDIT+set}" = set; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$NMEDIT"; then - ac_cv_prog_NMEDIT="$NMEDIT" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_prog_NMEDIT="${ac_tool_prefix}nmedit" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -fi -fi -NMEDIT=$ac_cv_prog_NMEDIT -if test -n "$NMEDIT"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $NMEDIT" >&5 -$as_echo "$NMEDIT" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - -fi -if test -z "$ac_cv_prog_NMEDIT"; then - ac_ct_NMEDIT=$NMEDIT - # Extract the first word of "nmedit", so it can be a program name with args. -set dummy nmedit; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if test "${ac_cv_prog_ac_ct_NMEDIT+set}" = set; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$ac_ct_NMEDIT"; then - ac_cv_prog_ac_ct_NMEDIT="$ac_ct_NMEDIT" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_prog_ac_ct_NMEDIT="nmedit" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -fi -fi -ac_ct_NMEDIT=$ac_cv_prog_ac_ct_NMEDIT -if test -n "$ac_ct_NMEDIT"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_NMEDIT" >&5 -$as_echo "$ac_ct_NMEDIT" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - if test "x$ac_ct_NMEDIT" = x; then - NMEDIT=":" - else - case $cross_compiling:$ac_tool_warned in -yes:) -{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 -$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} -ac_tool_warned=yes ;; -esac - NMEDIT=$ac_ct_NMEDIT - fi -else - NMEDIT="$ac_cv_prog_NMEDIT" -fi - - if test -n "$ac_tool_prefix"; then - # Extract the first word of "${ac_tool_prefix}lipo", so it can be a program name with args. -set dummy ${ac_tool_prefix}lipo; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if test "${ac_cv_prog_LIPO+set}" = set; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$LIPO"; then - ac_cv_prog_LIPO="$LIPO" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_prog_LIPO="${ac_tool_prefix}lipo" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -fi -fi -LIPO=$ac_cv_prog_LIPO -if test -n "$LIPO"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $LIPO" >&5 -$as_echo "$LIPO" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - -fi -if test -z "$ac_cv_prog_LIPO"; then - ac_ct_LIPO=$LIPO - # Extract the first word of "lipo", so it can be a program name with args. -set dummy lipo; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if test "${ac_cv_prog_ac_ct_LIPO+set}" = set; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$ac_ct_LIPO"; then - ac_cv_prog_ac_ct_LIPO="$ac_ct_LIPO" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_prog_ac_ct_LIPO="lipo" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -fi -fi -ac_ct_LIPO=$ac_cv_prog_ac_ct_LIPO -if test -n "$ac_ct_LIPO"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_LIPO" >&5 -$as_echo "$ac_ct_LIPO" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - if test "x$ac_ct_LIPO" = x; then - LIPO=":" - else - case $cross_compiling:$ac_tool_warned in -yes:) -{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 -$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} -ac_tool_warned=yes ;; -esac - LIPO=$ac_ct_LIPO - fi -else - LIPO="$ac_cv_prog_LIPO" -fi - - if test -n "$ac_tool_prefix"; then - # Extract the first word of "${ac_tool_prefix}otool", so it can be a program name with args. -set dummy ${ac_tool_prefix}otool; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if test "${ac_cv_prog_OTOOL+set}" = set; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$OTOOL"; then - ac_cv_prog_OTOOL="$OTOOL" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_prog_OTOOL="${ac_tool_prefix}otool" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -fi -fi -OTOOL=$ac_cv_prog_OTOOL -if test -n "$OTOOL"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $OTOOL" >&5 -$as_echo "$OTOOL" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - -fi -if test -z "$ac_cv_prog_OTOOL"; then - ac_ct_OTOOL=$OTOOL - # Extract the first word of "otool", so it can be a program name with args. -set dummy otool; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if test "${ac_cv_prog_ac_ct_OTOOL+set}" = set; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$ac_ct_OTOOL"; then - ac_cv_prog_ac_ct_OTOOL="$ac_ct_OTOOL" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_prog_ac_ct_OTOOL="otool" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -fi -fi -ac_ct_OTOOL=$ac_cv_prog_ac_ct_OTOOL -if test -n "$ac_ct_OTOOL"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_OTOOL" >&5 -$as_echo "$ac_ct_OTOOL" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - if test "x$ac_ct_OTOOL" = x; then - OTOOL=":" - else - case $cross_compiling:$ac_tool_warned in -yes:) -{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 -$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} -ac_tool_warned=yes ;; -esac - OTOOL=$ac_ct_OTOOL - fi -else - OTOOL="$ac_cv_prog_OTOOL" -fi - - if test -n "$ac_tool_prefix"; then - # Extract the first word of "${ac_tool_prefix}otool64", so it can be a program name with args. -set dummy ${ac_tool_prefix}otool64; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if test "${ac_cv_prog_OTOOL64+set}" = set; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$OTOOL64"; then - ac_cv_prog_OTOOL64="$OTOOL64" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_prog_OTOOL64="${ac_tool_prefix}otool64" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -fi -fi -OTOOL64=$ac_cv_prog_OTOOL64 -if test -n "$OTOOL64"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $OTOOL64" >&5 -$as_echo "$OTOOL64" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - -fi -if test -z "$ac_cv_prog_OTOOL64"; then - ac_ct_OTOOL64=$OTOOL64 - # Extract the first word of "otool64", so it can be a program name with args. -set dummy otool64; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if test "${ac_cv_prog_ac_ct_OTOOL64+set}" = set; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$ac_ct_OTOOL64"; then - ac_cv_prog_ac_ct_OTOOL64="$ac_ct_OTOOL64" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_prog_ac_ct_OTOOL64="otool64" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -fi -fi -ac_ct_OTOOL64=$ac_cv_prog_ac_ct_OTOOL64 -if test -n "$ac_ct_OTOOL64"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_OTOOL64" >&5 -$as_echo "$ac_ct_OTOOL64" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - if test "x$ac_ct_OTOOL64" = x; then - OTOOL64=":" - else - case $cross_compiling:$ac_tool_warned in -yes:) -{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 -$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} -ac_tool_warned=yes ;; -esac - OTOOL64=$ac_ct_OTOOL64 - fi -else - OTOOL64="$ac_cv_prog_OTOOL64" -fi - - - - - - - - - - - - - - - - - - - - - - - - - - - - { $as_echo "$as_me:${as_lineno-$LINENO}: checking for -single_module linker flag" >&5 -$as_echo_n "checking for -single_module linker flag... " >&6; } -if test "${lt_cv_apple_cc_single_mod+set}" = set; then : - $as_echo_n "(cached) " >&6 -else - lt_cv_apple_cc_single_mod=no - if test -z "${LT_MULTI_MODULE}"; then - # By default we will add the -single_module flag. You can override - # by either setting the environment variable LT_MULTI_MODULE - # non-empty at configure time, or by adding -multi_module to the - # link flags. - rm -rf libconftest.dylib* - echo "int foo(void){return 1;}" > conftest.c - echo "$LTCC $LTCFLAGS $LDFLAGS -o libconftest.dylib \ --dynamiclib -Wl,-single_module conftest.c" >&5 - $LTCC $LTCFLAGS $LDFLAGS -o libconftest.dylib \ - -dynamiclib -Wl,-single_module conftest.c 2>conftest.err - _lt_result=$? - if test -f libconftest.dylib && test ! -s conftest.err && test $_lt_result = 0; then - lt_cv_apple_cc_single_mod=yes - else - cat conftest.err >&5 - fi - rm -rf libconftest.dylib* - rm -f conftest.* - fi -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_apple_cc_single_mod" >&5 -$as_echo "$lt_cv_apple_cc_single_mod" >&6; } - { $as_echo "$as_me:${as_lineno-$LINENO}: checking for -exported_symbols_list linker flag" >&5 -$as_echo_n "checking for -exported_symbols_list linker flag... " >&6; } -if test "${lt_cv_ld_exported_symbols_list+set}" = set; then : - $as_echo_n "(cached) " >&6 -else - lt_cv_ld_exported_symbols_list=no - save_LDFLAGS=$LDFLAGS - echo "_main" > conftest.sym - LDFLAGS="$LDFLAGS -Wl,-exported_symbols_list,conftest.sym" - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - -int -main () -{ - - ; - return 0; -} -_ACEOF -if ac_fn_c_try_link "$LINENO"; then : - lt_cv_ld_exported_symbols_list=yes -else - lt_cv_ld_exported_symbols_list=no -fi -rm -f core conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext - LDFLAGS="$save_LDFLAGS" - -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_ld_exported_symbols_list" >&5 -$as_echo "$lt_cv_ld_exported_symbols_list" >&6; } - case $host_os in - rhapsody* | darwin1.[012]) - _lt_dar_allow_undefined='${wl}-undefined ${wl}suppress' ;; - darwin1.*) - _lt_dar_allow_undefined='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' ;; - darwin*) # darwin 5.x on - # if running on 10.5 or later, the deployment target defaults - # to the OS version, if on x86, and 10.4, the deployment - # target defaults to 10.4. Don't you love it? - case ${MACOSX_DEPLOYMENT_TARGET-10.0},$host in - 10.0,*86*-darwin8*|10.0,*-darwin[91]*) - _lt_dar_allow_undefined='${wl}-undefined ${wl}dynamic_lookup' ;; - 10.[012]*) - _lt_dar_allow_undefined='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' ;; - 10.*) - _lt_dar_allow_undefined='${wl}-undefined ${wl}dynamic_lookup' ;; - esac - ;; - esac - if test "$lt_cv_apple_cc_single_mod" = "yes"; then - _lt_dar_single_mod='$single_module' - fi - if test "$lt_cv_ld_exported_symbols_list" = "yes"; then - _lt_dar_export_syms=' ${wl}-exported_symbols_list,$output_objdir/${libname}-symbols.expsym' - else - _lt_dar_export_syms='~$NMEDIT -s $output_objdir/${libname}-symbols.expsym ${lib}' - fi - if test "$DSYMUTIL" != ":"; then - _lt_dsymutil='~$DSYMUTIL $lib || :' - else - _lt_dsymutil= - fi - ;; - esac - -ac_ext=c -ac_cpp='$CPP $CPPFLAGS' -ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' -ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_c_compiler_gnu -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to run the C preprocessor" >&5 -$as_echo_n "checking how to run the C preprocessor... " >&6; } -# On Suns, sometimes $CPP names a directory. -if test -n "$CPP" && test -d "$CPP"; then - CPP= -fi -if test -z "$CPP"; then - if test "${ac_cv_prog_CPP+set}" = set; then : - $as_echo_n "(cached) " >&6 -else - # Double quotes because CPP needs to be expanded - for CPP in "$CC -E" "$CC -E -traditional-cpp" "/lib/cpp" - do - ac_preproc_ok=false -for ac_c_preproc_warn_flag in '' yes -do - # Use a header file that comes with gcc, so configuring glibc - # with a fresh cross-compiler works. - # Prefer <limits.h> to <assert.h> if __STDC__ is defined, since - # <limits.h> exists even on freestanding compilers. - # On the NeXT, cc -E runs the code through the compiler's parser, - # not just through cpp. "Syntax error" is here to catch this case. - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -#ifdef __STDC__ -# include <limits.h> -#else -# include <assert.h> -#endif - Syntax error -_ACEOF -if ac_fn_c_try_cpp "$LINENO"; then : - -else - # Broken: fails on valid input. -continue -fi -rm -f conftest.err conftest.$ac_ext - - # OK, works on sane cases. Now check whether nonexistent headers - # can be detected and how. - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -#include <ac_nonexistent.h> -_ACEOF -if ac_fn_c_try_cpp "$LINENO"; then : - # Broken: success on invalid input. -continue -else - # Passes both tests. -ac_preproc_ok=: -break -fi -rm -f conftest.err conftest.$ac_ext - -done -# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped. -rm -f conftest.err conftest.$ac_ext -if $ac_preproc_ok; then : - break -fi - - done - ac_cv_prog_CPP=$CPP - -fi - CPP=$ac_cv_prog_CPP -else - ac_cv_prog_CPP=$CPP -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $CPP" >&5 -$as_echo "$CPP" >&6; } -ac_preproc_ok=false -for ac_c_preproc_warn_flag in '' yes -do - # Use a header file that comes with gcc, so configuring glibc - # with a fresh cross-compiler works. - # Prefer <limits.h> to <assert.h> if __STDC__ is defined, since - # <limits.h> exists even on freestanding compilers. - # On the NeXT, cc -E runs the code through the compiler's parser, - # not just through cpp. "Syntax error" is here to catch this case. - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -#ifdef __STDC__ -# include <limits.h> -#else -# include <assert.h> -#endif - Syntax error -_ACEOF -if ac_fn_c_try_cpp "$LINENO"; then : - -else - # Broken: fails on valid input. -continue -fi -rm -f conftest.err conftest.$ac_ext - - # OK, works on sane cases. Now check whether nonexistent headers - # can be detected and how. - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -#include <ac_nonexistent.h> -_ACEOF -if ac_fn_c_try_cpp "$LINENO"; then : - # Broken: success on invalid input. -continue -else - # Passes both tests. -ac_preproc_ok=: -break -fi -rm -f conftest.err conftest.$ac_ext - -done -# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped. -rm -f conftest.err conftest.$ac_ext -if $ac_preproc_ok; then : - -else - { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 -$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} -as_fn_error "C preprocessor \"$CPP\" fails sanity check -See \`config.log' for more details." "$LINENO" 5; } -fi - -ac_ext=c -ac_cpp='$CPP $CPPFLAGS' -ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' -ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_c_compiler_gnu - - -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for ANSI C header files" >&5 -$as_echo_n "checking for ANSI C header files... " >&6; } -if test "${ac_cv_header_stdc+set}" = set; then : - $as_echo_n "(cached) " >&6 -else - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -#include <stdlib.h> -#include <stdarg.h> -#include <string.h> -#include <float.h> - -int -main () -{ - - ; - return 0; -} -_ACEOF -if ac_fn_c_try_compile "$LINENO"; then : - ac_cv_header_stdc=yes -else - ac_cv_header_stdc=no -fi -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext - -if test $ac_cv_header_stdc = yes; then - # SunOS 4.x string.h does not declare mem*, contrary to ANSI. - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -#include <string.h> - -_ACEOF -if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | - $EGREP "memchr" >/dev/null 2>&1; then : - -else - ac_cv_header_stdc=no -fi -rm -f conftest* - -fi - -if test $ac_cv_header_stdc = yes; then - # ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI. - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -#include <stdlib.h> - -_ACEOF -if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | - $EGREP "free" >/dev/null 2>&1; then : - -else - ac_cv_header_stdc=no -fi -rm -f conftest* - -fi - -if test $ac_cv_header_stdc = yes; then - # /bin/cc in Irix-4.0.5 gets non-ANSI ctype macros unless using -ansi. - if test "$cross_compiling" = yes; then : - : -else - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -#include <ctype.h> -#include <stdlib.h> -#if ((' ' & 0x0FF) == 0x020) -# define ISLOWER(c) ('a' <= (c) && (c) <= 'z') -# define TOUPPER(c) (ISLOWER(c) ? 'A' + ((c) - 'a') : (c)) -#else -# define ISLOWER(c) \ - (('a' <= (c) && (c) <= 'i') \ - || ('j' <= (c) && (c) <= 'r') \ - || ('s' <= (c) && (c) <= 'z')) -# define TOUPPER(c) (ISLOWER(c) ? ((c) | 0x40) : (c)) -#endif - -#define XOR(e, f) (((e) && !(f)) || (!(e) && (f))) -int -main () -{ - int i; - for (i = 0; i < 256; i++) - if (XOR (islower (i), ISLOWER (i)) - || toupper (i) != TOUPPER (i)) - return 2; - return 0; -} -_ACEOF -if ac_fn_c_try_run "$LINENO"; then : - -else - ac_cv_header_stdc=no -fi -rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \ - conftest.$ac_objext conftest.beam conftest.$ac_ext -fi - -fi -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_header_stdc" >&5 -$as_echo "$ac_cv_header_stdc" >&6; } -if test $ac_cv_header_stdc = yes; then - -$as_echo "#define STDC_HEADERS 1" >>confdefs.h - -fi - -# On IRIX 5.3, sys/types and inttypes.h are conflicting. -for ac_header in sys/types.h sys/stat.h stdlib.h string.h memory.h strings.h \ - inttypes.h stdint.h unistd.h -do : - as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh` -ac_fn_c_check_header_compile "$LINENO" "$ac_header" "$as_ac_Header" "$ac_includes_default -" -eval as_val=\$$as_ac_Header - if test "x$as_val" = x""yes; then : - cat >>confdefs.h <<_ACEOF -#define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1 -_ACEOF - -fi - -done - - -for ac_header in dlfcn.h -do : - ac_fn_c_check_header_compile "$LINENO" "dlfcn.h" "ac_cv_header_dlfcn_h" "$ac_includes_default -" -if test "x$ac_cv_header_dlfcn_h" = x""yes; then : - cat >>confdefs.h <<_ACEOF -#define HAVE_DLFCN_H 1 -_ACEOF - -fi - -done - - - -# Set options - - - - enable_dlopen=no - - - enable_win32_dll=no - - - # Check whether --enable-shared was given. -if test "${enable_shared+set}" = set; then : - enableval=$enable_shared; p=${PACKAGE-default} - case $enableval in - yes) enable_shared=yes ;; - no) enable_shared=no ;; - *) - enable_shared=no - # Look at the argument we got. We use all the common list separators. - lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR," - for pkg in $enableval; do - IFS="$lt_save_ifs" - if test "X$pkg" = "X$p"; then - enable_shared=yes - fi - done - IFS="$lt_save_ifs" - ;; - esac -else - enable_shared=yes -fi - - - - - - - - - - # Check whether --enable-static was given. -if test "${enable_static+set}" = set; then : - enableval=$enable_static; p=${PACKAGE-default} - case $enableval in - yes) enable_static=yes ;; - no) enable_static=no ;; - *) - enable_static=no - # Look at the argument we got. We use all the common list separators. - lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR," - for pkg in $enableval; do - IFS="$lt_save_ifs" - if test "X$pkg" = "X$p"; then - enable_static=yes - fi - done - IFS="$lt_save_ifs" - ;; - esac -else - enable_static=yes -fi - - - - - - - - - - -# Check whether --with-pic was given. -if test "${with_pic+set}" = set; then : - withval=$with_pic; pic_mode="$withval" -else - pic_mode=default -fi - - -test -z "$pic_mode" && pic_mode=default - - - - - - - - # Check whether --enable-fast-install was given. -if test "${enable_fast_install+set}" = set; then : - enableval=$enable_fast_install; p=${PACKAGE-default} - case $enableval in - yes) enable_fast_install=yes ;; - no) enable_fast_install=no ;; - *) - enable_fast_install=no - # Look at the argument we got. We use all the common list separators. - lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR," - for pkg in $enableval; do - IFS="$lt_save_ifs" - if test "X$pkg" = "X$p"; then - enable_fast_install=yes - fi - done - IFS="$lt_save_ifs" - ;; - esac -else - enable_fast_install=yes -fi - - - - - - - - - - - -# This can be used to rebuild libtool when needed -LIBTOOL_DEPS="$ltmain" - -# Always use our own libtool. -LIBTOOL='$(SHELL) $(top_builddir)/libtool' - - - - - - - - - - - - - - - - - - - - - - - - - -test -z "$LN_S" && LN_S="ln -s" - - - - - - - - - - - - - - -if test -n "${ZSH_VERSION+set}" ; then - setopt NO_GLOB_SUBST -fi - -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for objdir" >&5 -$as_echo_n "checking for objdir... " >&6; } -if test "${lt_cv_objdir+set}" = set; then : - $as_echo_n "(cached) " >&6 -else - rm -f .libs 2>/dev/null -mkdir .libs 2>/dev/null -if test -d .libs; then - lt_cv_objdir=.libs -else - # MS-DOS does not allow filenames that begin with a dot. - lt_cv_objdir=_libs -fi -rmdir .libs 2>/dev/null -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_objdir" >&5 -$as_echo "$lt_cv_objdir" >&6; } -objdir=$lt_cv_objdir - - - - - -cat >>confdefs.h <<_ACEOF -#define LT_OBJDIR "$lt_cv_objdir/" -_ACEOF - - - - - - - - - - - - - - - - - -case $host_os in -aix3*) - # AIX sometimes has problems with the GCC collect2 program. For some - # reason, if we set the COLLECT_NAMES environment variable, the problems - # vanish in a puff of smoke. - if test "X${COLLECT_NAMES+set}" != Xset; then - COLLECT_NAMES= - export COLLECT_NAMES - fi - ;; -esac - -# Sed substitution that helps us do robust quoting. It backslashifies -# metacharacters that are still active within double-quoted strings. -sed_quote_subst='s/\(["`$\\]\)/\\\1/g' - -# Same as above, but do not quote variable references. -double_quote_subst='s/\(["`\\]\)/\\\1/g' - -# Sed substitution to delay expansion of an escaped shell variable in a -# double_quote_subst'ed string. -delay_variable_subst='s/\\\\\\\\\\\$/\\\\\\$/g' - -# Sed substitution to delay expansion of an escaped single quote. -delay_single_quote_subst='s/'\''/'\'\\\\\\\'\''/g' - -# Sed substitution to avoid accidental globbing in evaled expressions -no_glob_subst='s/\*/\\\*/g' - -# Global variables: -ofile=libtool -can_build_shared=yes - -# All known linkers require a `.a' archive for static linking (except MSVC, -# which needs '.lib'). -libext=a - -with_gnu_ld="$lt_cv_prog_gnu_ld" - -old_CC="$CC" -old_CFLAGS="$CFLAGS" - -# Set sane defaults for various variables -test -z "$CC" && CC=cc -test -z "$LTCC" && LTCC=$CC -test -z "$LTCFLAGS" && LTCFLAGS=$CFLAGS -test -z "$LD" && LD=ld -test -z "$ac_objext" && ac_objext=o - -for cc_temp in $compiler""; do - case $cc_temp in - compile | *[\\/]compile | ccache | *[\\/]ccache ) ;; - distcc | *[\\/]distcc | purify | *[\\/]purify ) ;; - \-*) ;; - *) break;; - esac -done -cc_basename=`$ECHO "X$cc_temp" | $Xsed -e 's%.*/%%' -e "s%^$host_alias-%%"` - - -# Only perform the check for file, if the check method requires it -test -z "$MAGIC_CMD" && MAGIC_CMD=file -case $deplibs_check_method in -file_magic*) - if test "$file_magic_cmd" = '$MAGIC_CMD'; then - { $as_echo "$as_me:${as_lineno-$LINENO}: checking for ${ac_tool_prefix}file" >&5 -$as_echo_n "checking for ${ac_tool_prefix}file... " >&6; } -if test "${lt_cv_path_MAGIC_CMD+set}" = set; then : - $as_echo_n "(cached) " >&6 -else - case $MAGIC_CMD in -[\\/*] | ?:[\\/]*) - lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path. - ;; -*) - lt_save_MAGIC_CMD="$MAGIC_CMD" - lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR - ac_dummy="/usr/bin$PATH_SEPARATOR$PATH" - for ac_dir in $ac_dummy; do - IFS="$lt_save_ifs" - test -z "$ac_dir" && ac_dir=. - if test -f $ac_dir/${ac_tool_prefix}file; then - lt_cv_path_MAGIC_CMD="$ac_dir/${ac_tool_prefix}file" - if test -n "$file_magic_test_file"; then - case $deplibs_check_method in - "file_magic "*) - file_magic_regex=`expr "$deplibs_check_method" : "file_magic \(.*\)"` - MAGIC_CMD="$lt_cv_path_MAGIC_CMD" - if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null | - $EGREP "$file_magic_regex" > /dev/null; then - : - else - cat <<_LT_EOF 1>&2 - -*** Warning: the command libtool uses to detect shared libraries, -*** $file_magic_cmd, produces output that libtool cannot recognize. -*** The result is that libtool may fail to recognize shared libraries -*** as such. This will affect the creation of libtool libraries that -*** depend on shared libraries, but programs linked with such libtool -*** libraries will work regardless of this problem. Nevertheless, you -*** may want to report the problem to your system manager and/or to -*** bug-libtool@gnu.org - -_LT_EOF - fi ;; - esac - fi - break - fi - done - IFS="$lt_save_ifs" - MAGIC_CMD="$lt_save_MAGIC_CMD" - ;; -esac -fi - -MAGIC_CMD="$lt_cv_path_MAGIC_CMD" -if test -n "$MAGIC_CMD"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $MAGIC_CMD" >&5 -$as_echo "$MAGIC_CMD" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - - - - -if test -z "$lt_cv_path_MAGIC_CMD"; then - if test -n "$ac_tool_prefix"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: checking for file" >&5 -$as_echo_n "checking for file... " >&6; } -if test "${lt_cv_path_MAGIC_CMD+set}" = set; then : - $as_echo_n "(cached) " >&6 -else - case $MAGIC_CMD in -[\\/*] | ?:[\\/]*) - lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path. - ;; -*) - lt_save_MAGIC_CMD="$MAGIC_CMD" - lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR - ac_dummy="/usr/bin$PATH_SEPARATOR$PATH" - for ac_dir in $ac_dummy; do - IFS="$lt_save_ifs" - test -z "$ac_dir" && ac_dir=. - if test -f $ac_dir/file; then - lt_cv_path_MAGIC_CMD="$ac_dir/file" - if test -n "$file_magic_test_file"; then - case $deplibs_check_method in - "file_magic "*) - file_magic_regex=`expr "$deplibs_check_method" : "file_magic \(.*\)"` - MAGIC_CMD="$lt_cv_path_MAGIC_CMD" - if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null | - $EGREP "$file_magic_regex" > /dev/null; then - : - else - cat <<_LT_EOF 1>&2 - -*** Warning: the command libtool uses to detect shared libraries, -*** $file_magic_cmd, produces output that libtool cannot recognize. -*** The result is that libtool may fail to recognize shared libraries -*** as such. This will affect the creation of libtool libraries that -*** depend on shared libraries, but programs linked with such libtool -*** libraries will work regardless of this problem. Nevertheless, you -*** may want to report the problem to your system manager and/or to -*** bug-libtool@gnu.org - -_LT_EOF - fi ;; - esac - fi - break - fi - done - IFS="$lt_save_ifs" - MAGIC_CMD="$lt_save_MAGIC_CMD" - ;; -esac -fi - -MAGIC_CMD="$lt_cv_path_MAGIC_CMD" -if test -n "$MAGIC_CMD"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $MAGIC_CMD" >&5 -$as_echo "$MAGIC_CMD" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - - else - MAGIC_CMD=: - fi -fi - - fi - ;; -esac - -# Use C for the default configuration in the libtool script - -lt_save_CC="$CC" -ac_ext=c -ac_cpp='$CPP $CPPFLAGS' -ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' -ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_c_compiler_gnu - - -# Source file extension for C test sources. -ac_ext=c - -# Object file extension for compiled C test sources. -objext=o -objext=$objext - -# Code to be used in simple compile tests -lt_simple_compile_test_code="int some_variable = 0;" - -# Code to be used in simple link tests -lt_simple_link_test_code='int main(){return(0);}' - - - - - - - -# If no C compiler was specified, use CC. -LTCC=${LTCC-"$CC"} - -# If no C compiler flags were specified, use CFLAGS. -LTCFLAGS=${LTCFLAGS-"$CFLAGS"} - -# Allow CC to be a program name with arguments. -compiler=$CC - -# Save the default compiler, since it gets overwritten when the other -# tags are being tested, and _LT_TAGVAR(compiler, []) is a NOP. -compiler_DEFAULT=$CC - -# save warnings/boilerplate of simple test code -ac_outfile=conftest.$ac_objext -echo "$lt_simple_compile_test_code" >conftest.$ac_ext -eval "$ac_compile" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err -_lt_compiler_boilerplate=`cat conftest.err` -$RM conftest* - -ac_outfile=conftest.$ac_objext -echo "$lt_simple_link_test_code" >conftest.$ac_ext -eval "$ac_link" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err -_lt_linker_boilerplate=`cat conftest.err` -$RM -r conftest* - - -if test -n "$compiler"; then - -lt_prog_compiler_no_builtin_flag= - -if test "$GCC" = yes; then - lt_prog_compiler_no_builtin_flag=' -fno-builtin' - - { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler supports -fno-rtti -fno-exceptions" >&5 -$as_echo_n "checking if $compiler supports -fno-rtti -fno-exceptions... " >&6; } -if test "${lt_cv_prog_compiler_rtti_exceptions+set}" = set; then : - $as_echo_n "(cached) " >&6 -else - lt_cv_prog_compiler_rtti_exceptions=no - ac_outfile=conftest.$ac_objext - echo "$lt_simple_compile_test_code" > conftest.$ac_ext - lt_compiler_flag="-fno-rtti -fno-exceptions" - # Insert the option either (1) after the last *FLAGS variable, or - # (2) before a word containing "conftest.", or (3) at the end. - # Note that $ac_compile itself does not contain backslashes and begins - # with a dollar sign (not a hyphen), so the echo should work correctly. - # The option is referenced via a variable to avoid confusing sed. - lt_compile=`echo "$ac_compile" | $SED \ - -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ - -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ - -e 's:$: $lt_compiler_flag:'` - (eval echo "\"\$as_me:7548: $lt_compile\"" >&5) - (eval "$lt_compile" 2>conftest.err) - ac_status=$? - cat conftest.err >&5 - echo "$as_me:7552: \$? = $ac_status" >&5 - if (exit $ac_status) && test -s "$ac_outfile"; then - # The compiler can only warn and ignore the option if not recognized - # So say no if there are warnings other than the usual output. - $ECHO "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' >conftest.exp - $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2 - if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then - lt_cv_prog_compiler_rtti_exceptions=yes - fi - fi - $RM conftest* - -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_rtti_exceptions" >&5 -$as_echo "$lt_cv_prog_compiler_rtti_exceptions" >&6; } - -if test x"$lt_cv_prog_compiler_rtti_exceptions" = xyes; then - lt_prog_compiler_no_builtin_flag="$lt_prog_compiler_no_builtin_flag -fno-rtti -fno-exceptions" -else - : -fi - -fi - - - - - - - lt_prog_compiler_wl= -lt_prog_compiler_pic= -lt_prog_compiler_static= - -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $compiler option to produce PIC" >&5 -$as_echo_n "checking for $compiler option to produce PIC... " >&6; } - - if test "$GCC" = yes; then - lt_prog_compiler_wl='-Wl,' - lt_prog_compiler_static='-static' - - case $host_os in - aix*) - # All AIX code is PIC. - if test "$host_cpu" = ia64; then - # AIX 5 now supports IA64 processor - lt_prog_compiler_static='-Bstatic' - fi - ;; - - amigaos*) - case $host_cpu in - powerpc) - # see comment about AmigaOS4 .so support - lt_prog_compiler_pic='-fPIC' - ;; - m68k) - # FIXME: we need at least 68020 code to build shared libraries, but - # adding the `-m68020' flag to GCC prevents building anything better, - # like `-m68040'. - lt_prog_compiler_pic='-m68020 -resident32 -malways-restore-a4' - ;; - esac - ;; - - beos* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*) - # PIC is the default for these OSes. - ;; - - mingw* | cygwin* | pw32* | os2* | cegcc*) - # This hack is so that the source file can tell whether it is being - # built for inclusion in a dll (and should export symbols for example). - # Although the cygwin gcc ignores -fPIC, still need this for old-style - # (--disable-auto-import) libraries - lt_prog_compiler_pic='-DDLL_EXPORT' - ;; - - darwin* | rhapsody*) - # PIC is the default on this platform - # Common symbols not allowed in MH_DYLIB files - lt_prog_compiler_pic='-fno-common' - ;; - - hpux*) - # PIC is the default for 64-bit PA HP-UX, but not for 32-bit - # PA HP-UX. On IA64 HP-UX, PIC is the default but the pic flag - # sets the default TLS model and affects inlining. - case $host_cpu in - hppa*64*) - # +Z the default - ;; - *) - lt_prog_compiler_pic='-fPIC' - ;; - esac - ;; - - interix[3-9]*) - # Interix 3.x gcc -fpic/-fPIC options generate broken code. - # Instead, we relocate shared libraries at runtime. - ;; - - msdosdjgpp*) - # Just because we use GCC doesn't mean we suddenly get shared libraries - # on systems that don't support them. - lt_prog_compiler_can_build_shared=no - enable_shared=no - ;; - - *nto* | *qnx*) - # QNX uses GNU C++, but need to define -shared option too, otherwise - # it will coredump. - lt_prog_compiler_pic='-fPIC -shared' - ;; - - sysv4*MP*) - if test -d /usr/nec; then - lt_prog_compiler_pic=-Kconform_pic - fi - ;; - - *) - lt_prog_compiler_pic='-fPIC' - ;; - esac - else - # PORTME Check for flag to pass linker flags through the system compiler. - case $host_os in - aix*) - lt_prog_compiler_wl='-Wl,' - if test "$host_cpu" = ia64; then - # AIX 5 now supports IA64 processor - lt_prog_compiler_static='-Bstatic' - else - lt_prog_compiler_static='-bnso -bI:/lib/syscalls.exp' - fi - ;; - - mingw* | cygwin* | pw32* | os2* | cegcc*) - # This hack is so that the source file can tell whether it is being - # built for inclusion in a dll (and should export symbols for example). - lt_prog_compiler_pic='-DDLL_EXPORT' - ;; - - hpux9* | hpux10* | hpux11*) - lt_prog_compiler_wl='-Wl,' - # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but - # not for PA HP-UX. - case $host_cpu in - hppa*64*|ia64*) - # +Z the default - ;; - *) - lt_prog_compiler_pic='+Z' - ;; - esac - # Is there a better lt_prog_compiler_static that works with the bundled CC? - lt_prog_compiler_static='${wl}-a ${wl}archive' - ;; - - irix5* | irix6* | nonstopux*) - lt_prog_compiler_wl='-Wl,' - # PIC (with -KPIC) is the default. - lt_prog_compiler_static='-non_shared' - ;; - - linux* | k*bsd*-gnu) - case $cc_basename in - # old Intel for x86_64 which still supported -KPIC. - ecc*) - lt_prog_compiler_wl='-Wl,' - lt_prog_compiler_pic='-KPIC' - lt_prog_compiler_static='-static' - ;; - # icc used to be incompatible with GCC. - # ICC 10 doesn't accept -KPIC any more. - icc* | ifort*) - lt_prog_compiler_wl='-Wl,' - lt_prog_compiler_pic='-fPIC' - lt_prog_compiler_static='-static' - ;; - # Lahey Fortran 8.1. - lf95*) - lt_prog_compiler_wl='-Wl,' - lt_prog_compiler_pic='--shared' - lt_prog_compiler_static='--static' - ;; - pgcc* | pgf77* | pgf90* | pgf95*) - # Portland Group compilers (*not* the Pentium gcc compiler, - # which looks to be a dead project) - lt_prog_compiler_wl='-Wl,' - lt_prog_compiler_pic='-fpic' - lt_prog_compiler_static='-Bstatic' - ;; - ccc*) - lt_prog_compiler_wl='-Wl,' - # All Alpha code is PIC. - lt_prog_compiler_static='-non_shared' - ;; - xl*) - # IBM XL C 8.0/Fortran 10.1 on PPC - lt_prog_compiler_wl='-Wl,' - lt_prog_compiler_pic='-qpic' - lt_prog_compiler_static='-qstaticlink' - ;; - *) - case `$CC -V 2>&1 | sed 5q` in - *Sun\ C*) - # Sun C 5.9 - lt_prog_compiler_pic='-KPIC' - lt_prog_compiler_static='-Bstatic' - lt_prog_compiler_wl='-Wl,' - ;; - *Sun\ F*) - # Sun Fortran 8.3 passes all unrecognized flags to the linker - lt_prog_compiler_pic='-KPIC' - lt_prog_compiler_static='-Bstatic' - lt_prog_compiler_wl='' - ;; - esac - ;; - esac - ;; - - newsos6) - lt_prog_compiler_pic='-KPIC' - lt_prog_compiler_static='-Bstatic' - ;; - - *nto* | *qnx*) - # QNX uses GNU C++, but need to define -shared option too, otherwise - # it will coredump. - lt_prog_compiler_pic='-fPIC -shared' - ;; - - osf3* | osf4* | osf5*) - lt_prog_compiler_wl='-Wl,' - # All OSF/1 code is PIC. - lt_prog_compiler_static='-non_shared' - ;; - - rdos*) - lt_prog_compiler_static='-non_shared' - ;; - - solaris*) - lt_prog_compiler_pic='-KPIC' - lt_prog_compiler_static='-Bstatic' - case $cc_basename in - f77* | f90* | f95*) - lt_prog_compiler_wl='-Qoption ld ';; - *) - lt_prog_compiler_wl='-Wl,';; - esac - ;; - - sunos4*) - lt_prog_compiler_wl='-Qoption ld ' - lt_prog_compiler_pic='-PIC' - lt_prog_compiler_static='-Bstatic' - ;; - - sysv4 | sysv4.2uw2* | sysv4.3*) - lt_prog_compiler_wl='-Wl,' - lt_prog_compiler_pic='-KPIC' - lt_prog_compiler_static='-Bstatic' - ;; - - sysv4*MP*) - if test -d /usr/nec ;then - lt_prog_compiler_pic='-Kconform_pic' - lt_prog_compiler_static='-Bstatic' - fi - ;; - - sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*) - lt_prog_compiler_wl='-Wl,' - lt_prog_compiler_pic='-KPIC' - lt_prog_compiler_static='-Bstatic' - ;; - - unicos*) - lt_prog_compiler_wl='-Wl,' - lt_prog_compiler_can_build_shared=no - ;; - - uts4*) - lt_prog_compiler_pic='-pic' - lt_prog_compiler_static='-Bstatic' - ;; - - *) - lt_prog_compiler_can_build_shared=no - ;; - esac - fi - -case $host_os in - # For platforms which do not support PIC, -DPIC is meaningless: - *djgpp*) - lt_prog_compiler_pic= - ;; - *) - lt_prog_compiler_pic="$lt_prog_compiler_pic -DPIC" - ;; -esac -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_prog_compiler_pic" >&5 -$as_echo "$lt_prog_compiler_pic" >&6; } - - - - - - -# -# Check to make sure the PIC flag actually works. -# -if test -n "$lt_prog_compiler_pic"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler PIC flag $lt_prog_compiler_pic works" >&5 -$as_echo_n "checking if $compiler PIC flag $lt_prog_compiler_pic works... " >&6; } -if test "${lt_cv_prog_compiler_pic_works+set}" = set; then : - $as_echo_n "(cached) " >&6 -else - lt_cv_prog_compiler_pic_works=no - ac_outfile=conftest.$ac_objext - echo "$lt_simple_compile_test_code" > conftest.$ac_ext - lt_compiler_flag="$lt_prog_compiler_pic -DPIC" - # Insert the option either (1) after the last *FLAGS variable, or - # (2) before a word containing "conftest.", or (3) at the end. - # Note that $ac_compile itself does not contain backslashes and begins - # with a dollar sign (not a hyphen), so the echo should work correctly. - # The option is referenced via a variable to avoid confusing sed. - lt_compile=`echo "$ac_compile" | $SED \ - -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ - -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ - -e 's:$: $lt_compiler_flag:'` - (eval echo "\"\$as_me:7887: $lt_compile\"" >&5) - (eval "$lt_compile" 2>conftest.err) - ac_status=$? - cat conftest.err >&5 - echo "$as_me:7891: \$? = $ac_status" >&5 - if (exit $ac_status) && test -s "$ac_outfile"; then - # The compiler can only warn and ignore the option if not recognized - # So say no if there are warnings other than the usual output. - $ECHO "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' >conftest.exp - $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2 - if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then - lt_cv_prog_compiler_pic_works=yes - fi - fi - $RM conftest* - -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_pic_works" >&5 -$as_echo "$lt_cv_prog_compiler_pic_works" >&6; } - -if test x"$lt_cv_prog_compiler_pic_works" = xyes; then - case $lt_prog_compiler_pic in - "" | " "*) ;; - *) lt_prog_compiler_pic=" $lt_prog_compiler_pic" ;; - esac -else - lt_prog_compiler_pic= - lt_prog_compiler_can_build_shared=no -fi - -fi - - - - - - -# -# Check to make sure the static flag actually works. -# -wl=$lt_prog_compiler_wl eval lt_tmp_static_flag=\"$lt_prog_compiler_static\" -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler static flag $lt_tmp_static_flag works" >&5 -$as_echo_n "checking if $compiler static flag $lt_tmp_static_flag works... " >&6; } -if test "${lt_cv_prog_compiler_static_works+set}" = set; then : - $as_echo_n "(cached) " >&6 -else - lt_cv_prog_compiler_static_works=no - save_LDFLAGS="$LDFLAGS" - LDFLAGS="$LDFLAGS $lt_tmp_static_flag" - echo "$lt_simple_link_test_code" > conftest.$ac_ext - if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then - # The linker can only warn and ignore the option if not recognized - # So say no if there are warnings - if test -s conftest.err; then - # Append any errors to the config.log. - cat conftest.err 1>&5 - $ECHO "X$_lt_linker_boilerplate" | $Xsed -e '/^$/d' > conftest.exp - $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2 - if diff conftest.exp conftest.er2 >/dev/null; then - lt_cv_prog_compiler_static_works=yes - fi - else - lt_cv_prog_compiler_static_works=yes - fi - fi - $RM -r conftest* - LDFLAGS="$save_LDFLAGS" - -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_static_works" >&5 -$as_echo "$lt_cv_prog_compiler_static_works" >&6; } - -if test x"$lt_cv_prog_compiler_static_works" = xyes; then - : -else - lt_prog_compiler_static= -fi - - - - - - - - { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler supports -c -o file.$ac_objext" >&5 -$as_echo_n "checking if $compiler supports -c -o file.$ac_objext... " >&6; } -if test "${lt_cv_prog_compiler_c_o+set}" = set; then : - $as_echo_n "(cached) " >&6 -else - lt_cv_prog_compiler_c_o=no - $RM -r conftest 2>/dev/null - mkdir conftest - cd conftest - mkdir out - echo "$lt_simple_compile_test_code" > conftest.$ac_ext - - lt_compiler_flag="-o out/conftest2.$ac_objext" - # Insert the option either (1) after the last *FLAGS variable, or - # (2) before a word containing "conftest.", or (3) at the end. - # Note that $ac_compile itself does not contain backslashes and begins - # with a dollar sign (not a hyphen), so the echo should work correctly. - lt_compile=`echo "$ac_compile" | $SED \ - -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ - -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ - -e 's:$: $lt_compiler_flag:'` - (eval echo "\"\$as_me:7992: $lt_compile\"" >&5) - (eval "$lt_compile" 2>out/conftest.err) - ac_status=$? - cat out/conftest.err >&5 - echo "$as_me:7996: \$? = $ac_status" >&5 - if (exit $ac_status) && test -s out/conftest2.$ac_objext - then - # The compiler can only warn and ignore the option if not recognized - # So say no if there are warnings - $ECHO "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' > out/conftest.exp - $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2 - if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then - lt_cv_prog_compiler_c_o=yes - fi - fi - chmod u+w . 2>&5 - $RM conftest* - # SGI C++ compiler will create directory out/ii_files/ for - # template instantiation - test -d out/ii_files && $RM out/ii_files/* && rmdir out/ii_files - $RM out/* && rmdir out - cd .. - $RM -r conftest - $RM conftest* - -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_c_o" >&5 -$as_echo "$lt_cv_prog_compiler_c_o" >&6; } - - - - - - - { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler supports -c -o file.$ac_objext" >&5 -$as_echo_n "checking if $compiler supports -c -o file.$ac_objext... " >&6; } -if test "${lt_cv_prog_compiler_c_o+set}" = set; then : - $as_echo_n "(cached) " >&6 -else - lt_cv_prog_compiler_c_o=no - $RM -r conftest 2>/dev/null - mkdir conftest - cd conftest - mkdir out - echo "$lt_simple_compile_test_code" > conftest.$ac_ext - - lt_compiler_flag="-o out/conftest2.$ac_objext" - # Insert the option either (1) after the last *FLAGS variable, or - # (2) before a word containing "conftest.", or (3) at the end. - # Note that $ac_compile itself does not contain backslashes and begins - # with a dollar sign (not a hyphen), so the echo should work correctly. - lt_compile=`echo "$ac_compile" | $SED \ - -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ - -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ - -e 's:$: $lt_compiler_flag:'` - (eval echo "\"\$as_me:8047: $lt_compile\"" >&5) - (eval "$lt_compile" 2>out/conftest.err) - ac_status=$? - cat out/conftest.err >&5 - echo "$as_me:8051: \$? = $ac_status" >&5 - if (exit $ac_status) && test -s out/conftest2.$ac_objext - then - # The compiler can only warn and ignore the option if not recognized - # So say no if there are warnings - $ECHO "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' > out/conftest.exp - $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2 - if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then - lt_cv_prog_compiler_c_o=yes - fi - fi - chmod u+w . 2>&5 - $RM conftest* - # SGI C++ compiler will create directory out/ii_files/ for - # template instantiation - test -d out/ii_files && $RM out/ii_files/* && rmdir out/ii_files - $RM out/* && rmdir out - cd .. - $RM -r conftest - $RM conftest* - -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_c_o" >&5 -$as_echo "$lt_cv_prog_compiler_c_o" >&6; } - - - - -hard_links="nottested" -if test "$lt_cv_prog_compiler_c_o" = no && test "$need_locks" != no; then - # do not overwrite the value of need_locks provided by the user - { $as_echo "$as_me:${as_lineno-$LINENO}: checking if we can lock with hard links" >&5 -$as_echo_n "checking if we can lock with hard links... " >&6; } - hard_links=yes - $RM conftest* - ln conftest.a conftest.b 2>/dev/null && hard_links=no - touch conftest.a - ln conftest.a conftest.b 2>&5 || hard_links=no - ln conftest.a conftest.b 2>/dev/null && hard_links=no - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $hard_links" >&5 -$as_echo "$hard_links" >&6; } - if test "$hard_links" = no; then - { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&5 -$as_echo "$as_me: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&2;} - need_locks=warn - fi -else - need_locks=no -fi - - - - - - - { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the $compiler linker ($LD) supports shared libraries" >&5 -$as_echo_n "checking whether the $compiler linker ($LD) supports shared libraries... " >&6; } - - runpath_var= - allow_undefined_flag= - always_export_symbols=no - archive_cmds= - archive_expsym_cmds= - compiler_needs_object=no - enable_shared_with_static_runtimes=no - export_dynamic_flag_spec= - export_symbols_cmds='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols' - hardcode_automatic=no - hardcode_direct=no - hardcode_direct_absolute=no - hardcode_libdir_flag_spec= - hardcode_libdir_flag_spec_ld= - hardcode_libdir_separator= - hardcode_minus_L=no - hardcode_shlibpath_var=unsupported - inherit_rpath=no - link_all_deplibs=unknown - module_cmds= - module_expsym_cmds= - old_archive_from_new_cmds= - old_archive_from_expsyms_cmds= - thread_safe_flag_spec= - whole_archive_flag_spec= - # include_expsyms should be a list of space-separated symbols to be *always* - # included in the symbol list - include_expsyms= - # exclude_expsyms can be an extended regexp of symbols to exclude - # it will be wrapped by ` (' and `)$', so one must not match beginning or - # end of line. Example: `a|bc|.*d.*' will exclude the symbols `a' and `bc', - # as well as any symbol that contains `d'. - exclude_expsyms='_GLOBAL_OFFSET_TABLE_|_GLOBAL__F[ID]_.*' - # Although _GLOBAL_OFFSET_TABLE_ is a valid symbol C name, most a.out - # platforms (ab)use it in PIC code, but their linkers get confused if - # the symbol is explicitly referenced. Since portable code cannot - # rely on this symbol name, it's probably fine to never include it in - # preloaded symbol tables. - # Exclude shared library initialization/finalization symbols. - extract_expsyms_cmds= - - case $host_os in - cygwin* | mingw* | pw32* | cegcc*) - # FIXME: the MSVC++ port hasn't been tested in a loooong time - # When not using gcc, we currently assume that we are using - # Microsoft Visual C++. - if test "$GCC" != yes; then - with_gnu_ld=no - fi - ;; - interix*) - # we just hope/assume this is gcc and not c89 (= MSVC++) - with_gnu_ld=yes - ;; - openbsd*) - with_gnu_ld=no - ;; - esac - - ld_shlibs=yes - if test "$with_gnu_ld" = yes; then - # If archive_cmds runs LD, not CC, wlarc should be empty - wlarc='${wl}' - - # Set some defaults for GNU ld with shared library support. These - # are reset later if shared libraries are not supported. Putting them - # here allows them to be overridden if necessary. - runpath_var=LD_RUN_PATH - hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' - export_dynamic_flag_spec='${wl}--export-dynamic' - # ancient GNU ld didn't support --whole-archive et. al. - if $LD --help 2>&1 | $GREP 'no-whole-archive' > /dev/null; then - whole_archive_flag_spec="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive' - else - whole_archive_flag_spec= - fi - supports_anon_versioning=no - case `$LD -v 2>&1` in - *\ [01].* | *\ 2.[0-9].* | *\ 2.10.*) ;; # catch versions < 2.11 - *\ 2.11.93.0.2\ *) supports_anon_versioning=yes ;; # RH7.3 ... - *\ 2.11.92.0.12\ *) supports_anon_versioning=yes ;; # Mandrake 8.2 ... - *\ 2.11.*) ;; # other 2.11 versions - *) supports_anon_versioning=yes ;; - esac - - # See if GNU ld supports shared libraries. - case $host_os in - aix[3-9]*) - # On AIX/PPC, the GNU linker is very broken - if test "$host_cpu" != ia64; then - ld_shlibs=no - cat <<_LT_EOF 1>&2 - -*** Warning: the GNU linker, at least up to release 2.9.1, is reported -*** to be unable to reliably create shared libraries on AIX. -*** Therefore, libtool is disabling shared libraries support. If you -*** really care for shared libraries, you may want to modify your PATH -*** so that a non-GNU linker is found, and then restart. - -_LT_EOF - fi - ;; - - amigaos*) - case $host_cpu in - powerpc) - # see comment about AmigaOS4 .so support - archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' - archive_expsym_cmds='' - ;; - m68k) - archive_cmds='$RM $output_objdir/a2ixlibrary.data~$ECHO "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$ECHO "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$ECHO "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$ECHO "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)' - hardcode_libdir_flag_spec='-L$libdir' - hardcode_minus_L=yes - ;; - esac - ;; - - beos*) - if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then - allow_undefined_flag=unsupported - # Joseph Beckenbach <jrb3@best.com> says some releases of gcc - # support --undefined. This deserves some investigation. FIXME - archive_cmds='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' - else - ld_shlibs=no - fi - ;; - - cygwin* | mingw* | pw32* | cegcc*) - # _LT_TAGVAR(hardcode_libdir_flag_spec, ) is actually meaningless, - # as there is no search path for DLLs. - hardcode_libdir_flag_spec='-L$libdir' - allow_undefined_flag=unsupported - always_export_symbols=no - enable_shared_with_static_runtimes=yes - export_symbols_cmds='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[BCDGRS][ ]/s/.*[ ]\([^ ]*\)/\1 DATA/'\'' | $SED -e '\''/^[AITW][ ]/s/.*[ ]//'\'' | sort | uniq > $export_symbols' - - if $LD --help 2>&1 | $GREP 'auto-import' > /dev/null; then - archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' - # If the export-symbols file already is a .def file (1st line - # is EXPORTS), use it as is; otherwise, prepend... - archive_expsym_cmds='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then - cp $export_symbols $output_objdir/$soname.def; - else - echo EXPORTS > $output_objdir/$soname.def; - cat $export_symbols >> $output_objdir/$soname.def; - fi~ - $CC -shared $output_objdir/$soname.def $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' - else - ld_shlibs=no - fi - ;; - - interix[3-9]*) - hardcode_direct=no - hardcode_shlibpath_var=no - hardcode_libdir_flag_spec='${wl}-rpath,$libdir' - export_dynamic_flag_spec='${wl}-E' - # Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc. - # Instead, shared libraries are loaded at an image base (0x10000000 by - # default) and relocated if they conflict, which is a slow very memory - # consuming and fragmenting process. To avoid this, we pick a random, - # 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link - # time. Moving up from 0x10000000 also allows more sbrk(2) space. - archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' - archive_expsym_cmds='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' - ;; - - gnu* | linux* | tpf* | k*bsd*-gnu) - tmp_diet=no - if test "$host_os" = linux-dietlibc; then - case $cc_basename in - diet\ *) tmp_diet=yes;; # linux-dietlibc with static linking (!diet-dyn) - esac - fi - if $LD --help 2>&1 | $EGREP ': supported targets:.* elf' > /dev/null \ - && test "$tmp_diet" = no - then - tmp_addflag= - tmp_sharedflag='-shared' - case $cc_basename,$host_cpu in - pgcc*) # Portland Group C compiler - whole_archive_flag_spec='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $ECHO \"$new_convenience\"` ${wl}--no-whole-archive' - tmp_addflag=' $pic_flag' - ;; - pgf77* | pgf90* | pgf95*) # Portland Group f77 and f90 compilers - whole_archive_flag_spec='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $ECHO \"$new_convenience\"` ${wl}--no-whole-archive' - tmp_addflag=' $pic_flag -Mnomain' ;; - ecc*,ia64* | icc*,ia64*) # Intel C compiler on ia64 - tmp_addflag=' -i_dynamic' ;; - efc*,ia64* | ifort*,ia64*) # Intel Fortran compiler on ia64 - tmp_addflag=' -i_dynamic -nofor_main' ;; - ifc* | ifort*) # Intel Fortran compiler - tmp_addflag=' -nofor_main' ;; - lf95*) # Lahey Fortran 8.1 - whole_archive_flag_spec= - tmp_sharedflag='--shared' ;; - xl[cC]*) # IBM XL C 8.0 on PPC (deal with xlf below) - tmp_sharedflag='-qmkshrobj' - tmp_addflag= ;; - esac - case `$CC -V 2>&1 | sed 5q` in - *Sun\ C*) # Sun C 5.9 - whole_archive_flag_spec='${wl}--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; $ECHO \"$new_convenience\"` ${wl}--no-whole-archive' - compiler_needs_object=yes - tmp_sharedflag='-G' ;; - *Sun\ F*) # Sun Fortran 8.3 - tmp_sharedflag='-G' ;; - esac - archive_cmds='$CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' - - if test "x$supports_anon_versioning" = xyes; then - archive_expsym_cmds='echo "{ global:" > $output_objdir/$libname.ver~ - cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~ - echo "local: *; };" >> $output_objdir/$libname.ver~ - $CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib' - fi - - case $cc_basename in - xlf*) - # IBM XL Fortran 10.1 on PPC cannot create shared libs itself - whole_archive_flag_spec='--whole-archive$convenience --no-whole-archive' - hardcode_libdir_flag_spec= - hardcode_libdir_flag_spec_ld='-rpath $libdir' - archive_cmds='$LD -shared $libobjs $deplibs $compiler_flags -soname $soname -o $lib' - if test "x$supports_anon_versioning" = xyes; then - archive_expsym_cmds='echo "{ global:" > $output_objdir/$libname.ver~ - cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~ - echo "local: *; };" >> $output_objdir/$libname.ver~ - $LD -shared $libobjs $deplibs $compiler_flags -soname $soname -version-script $output_objdir/$libname.ver -o $lib' - fi - ;; - esac - else - ld_shlibs=no - fi - ;; - - netbsd*) - if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then - archive_cmds='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib' - wlarc= - else - archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' - archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' - fi - ;; - - solaris*) - if $LD -v 2>&1 | $GREP 'BFD 2\.8' > /dev/null; then - ld_shlibs=no - cat <<_LT_EOF 1>&2 - -*** Warning: The releases 2.8.* of the GNU linker cannot reliably -*** create shared libraries on Solaris systems. Therefore, libtool -*** is disabling shared libraries support. We urge you to upgrade GNU -*** binutils to release 2.9.1 or newer. Another option is to modify -*** your PATH or compiler configuration so that the native linker is -*** used, and then restart. - -_LT_EOF - elif $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then - archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' - archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' - else - ld_shlibs=no - fi - ;; - - sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX*) - case `$LD -v 2>&1` in - *\ [01].* | *\ 2.[0-9].* | *\ 2.1[0-5].*) - ld_shlibs=no - cat <<_LT_EOF 1>&2 - -*** Warning: Releases of the GNU linker prior to 2.16.91.0.3 can not -*** reliably create shared libraries on SCO systems. Therefore, libtool -*** is disabling shared libraries support. We urge you to upgrade GNU -*** binutils to release 2.16.91.0.3 or newer. Another option is to modify -*** your PATH or compiler configuration so that the native linker is -*** used, and then restart. - -_LT_EOF - ;; - *) - # For security reasons, it is highly recommended that you always - # use absolute paths for naming shared libraries, and exclude the - # DT_RUNPATH tag from executables and libraries. But doing so - # requires that you compile everything twice, which is a pain. - if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then - hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' - archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' - archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' - else - ld_shlibs=no - fi - ;; - esac - ;; - - sunos4*) - archive_cmds='$LD -assert pure-text -Bshareable -o $lib $libobjs $deplibs $linker_flags' - wlarc= - hardcode_direct=yes - hardcode_shlibpath_var=no - ;; - - *) - if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then - archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' - archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' - else - ld_shlibs=no - fi - ;; - esac - - if test "$ld_shlibs" = no; then - runpath_var= - hardcode_libdir_flag_spec= - export_dynamic_flag_spec= - whole_archive_flag_spec= - fi - else - # PORTME fill in a description of your system's linker (not GNU ld) - case $host_os in - aix3*) - allow_undefined_flag=unsupported - always_export_symbols=yes - archive_expsym_cmds='$LD -o $output_objdir/$soname $libobjs $deplibs $linker_flags -bE:$export_symbols -T512 -H512 -bM:SRE~$AR $AR_FLAGS $lib $output_objdir/$soname' - # Note: this linker hardcodes the directories in LIBPATH if there - # are no directories specified by -L. - hardcode_minus_L=yes - if test "$GCC" = yes && test -z "$lt_prog_compiler_static"; then - # Neither direct hardcoding nor static linking is supported with a - # broken collect2. - hardcode_direct=unsupported - fi - ;; - - aix[4-9]*) - if test "$host_cpu" = ia64; then - # On IA64, the linker does run time linking by default, so we don't - # have to do anything special. - aix_use_runtimelinking=no - exp_sym_flag='-Bexport' - no_entry_flag="" - else - # If we're using GNU nm, then we don't want the "-C" option. - # -C means demangle to AIX nm, but means don't demangle with GNU nm - if $NM -V 2>&1 | $GREP 'GNU' > /dev/null; then - export_symbols_cmds='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B")) && (substr(\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols' - else - export_symbols_cmds='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B")) && (substr(\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols' - fi - aix_use_runtimelinking=no - - # Test if we are trying to use run time linking or normal - # AIX style linking. If -brtl is somewhere in LDFLAGS, we - # need to do runtime linking. - case $host_os in aix4.[23]|aix4.[23].*|aix[5-9]*) - for ld_flag in $LDFLAGS; do - if (test $ld_flag = "-brtl" || test $ld_flag = "-Wl,-brtl"); then - aix_use_runtimelinking=yes - break - fi - done - ;; - esac - - exp_sym_flag='-bexport' - no_entry_flag='-bnoentry' - fi - - # When large executables or shared objects are built, AIX ld can - # have problems creating the table of contents. If linking a library - # or program results in "error TOC overflow" add -mminimal-toc to - # CXXFLAGS/CFLAGS for g++/gcc. In the cases where that is not - # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS. - - archive_cmds='' - hardcode_direct=yes - hardcode_direct_absolute=yes - hardcode_libdir_separator=':' - link_all_deplibs=yes - file_list_spec='${wl}-f,' - - if test "$GCC" = yes; then - case $host_os in aix4.[012]|aix4.[012].*) - # We only want to do this on AIX 4.2 and lower, the check - # below for broken collect2 doesn't work under 4.3+ - collect2name=`${CC} -print-prog-name=collect2` - if test -f "$collect2name" && - strings "$collect2name" | $GREP resolve_lib_name >/dev/null - then - # We have reworked collect2 - : - else - # We have old collect2 - hardcode_direct=unsupported - # It fails to find uninstalled libraries when the uninstalled - # path is not listed in the libpath. Setting hardcode_minus_L - # to unsupported forces relinking - hardcode_minus_L=yes - hardcode_libdir_flag_spec='-L$libdir' - hardcode_libdir_separator= - fi - ;; - esac - shared_flag='-shared' - if test "$aix_use_runtimelinking" = yes; then - shared_flag="$shared_flag "'${wl}-G' - fi - else - # not using gcc - if test "$host_cpu" = ia64; then - # VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release - # chokes on -Wl,-G. The following line is correct: - shared_flag='-G' - else - if test "$aix_use_runtimelinking" = yes; then - shared_flag='${wl}-G' - else - shared_flag='${wl}-bM:SRE' - fi - fi - fi - - export_dynamic_flag_spec='${wl}-bexpall' - # It seems that -bexpall does not export symbols beginning with - # underscore (_), so it is better to generate a list of symbols to export. - always_export_symbols=yes - if test "$aix_use_runtimelinking" = yes; then - # Warning - without using the other runtime loading flags (-brtl), - # -berok will link without error, but may produce a broken library. - allow_undefined_flag='-berok' - # Determine the default libpath from the value encoded in an - # empty executable. - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - -int -main () -{ - - ; - return 0; -} -_ACEOF -if ac_fn_c_try_link "$LINENO"; then : - -lt_aix_libpath_sed=' - /Import File Strings/,/^$/ { - /^0/ { - s/^0 *\(.*\)$/\1/ - p - } - }' -aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` -# Check for a 64-bit object if we didn't find anything. -if test -z "$aix_libpath"; then - aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` -fi -fi -rm -f core conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext -if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi - - hardcode_libdir_flag_spec='${wl}-blibpath:$libdir:'"$aix_libpath" - archive_expsym_cmds='$CC -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then $ECHO "X${wl}${allow_undefined_flag}" | $Xsed; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag" - else - if test "$host_cpu" = ia64; then - hardcode_libdir_flag_spec='${wl}-R $libdir:/usr/lib:/lib' - allow_undefined_flag="-z nodefs" - archive_expsym_cmds="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$exp_sym_flag:\$export_symbols" - else - # Determine the default libpath from the value encoded in an - # empty executable. - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - -int -main () -{ - - ; - return 0; -} -_ACEOF -if ac_fn_c_try_link "$LINENO"; then : - -lt_aix_libpath_sed=' - /Import File Strings/,/^$/ { - /^0/ { - s/^0 *\(.*\)$/\1/ - p - } - }' -aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` -# Check for a 64-bit object if we didn't find anything. -if test -z "$aix_libpath"; then - aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` -fi -fi -rm -f core conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext -if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi - - hardcode_libdir_flag_spec='${wl}-blibpath:$libdir:'"$aix_libpath" - # Warning - without using the other run time loading flags, - # -berok will link without error, but may produce a broken library. - no_undefined_flag=' ${wl}-bernotok' - allow_undefined_flag=' ${wl}-berok' - # Exported symbols can be pulled into shared objects from archives - whole_archive_flag_spec='$convenience' - archive_cmds_need_lc=yes - # This is similar to how AIX traditionally builds its shared libraries. - archive_expsym_cmds="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname' - fi - fi - ;; - - amigaos*) - case $host_cpu in - powerpc) - # see comment about AmigaOS4 .so support - archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' - archive_expsym_cmds='' - ;; - m68k) - archive_cmds='$RM $output_objdir/a2ixlibrary.data~$ECHO "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$ECHO "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$ECHO "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$ECHO "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)' - hardcode_libdir_flag_spec='-L$libdir' - hardcode_minus_L=yes - ;; - esac - ;; - - bsdi[45]*) - export_dynamic_flag_spec=-rdynamic - ;; - - cygwin* | mingw* | pw32* | cegcc*) - # When not using gcc, we currently assume that we are using - # Microsoft Visual C++. - # hardcode_libdir_flag_spec is actually meaningless, as there is - # no search path for DLLs. - hardcode_libdir_flag_spec=' ' - allow_undefined_flag=unsupported - # Tell ltmain to make .lib files, not .a files. - libext=lib - # Tell ltmain to make .dll files, not .so files. - shrext_cmds=".dll" - # FIXME: Setting linknames here is a bad hack. - archive_cmds='$CC -o $lib $libobjs $compiler_flags `$ECHO "X$deplibs" | $Xsed -e '\''s/ -lc$//'\''` -link -dll~linknames=' - # The linker will automatically build a .lib file if we build a DLL. - old_archive_from_new_cmds='true' - # FIXME: Should let the user specify the lib program. - old_archive_cmds='lib -OUT:$oldlib$oldobjs$old_deplibs' - fix_srcfile_path='`cygpath -w "$srcfile"`' - enable_shared_with_static_runtimes=yes - ;; - - darwin* | rhapsody*) - - - archive_cmds_need_lc=no - hardcode_direct=no - hardcode_automatic=yes - hardcode_shlibpath_var=unsupported - whole_archive_flag_spec='' - link_all_deplibs=yes - allow_undefined_flag="$_lt_dar_allow_undefined" - case $cc_basename in - ifort*) _lt_dar_can_shared=yes ;; - *) _lt_dar_can_shared=$GCC ;; - esac - if test "$_lt_dar_can_shared" = "yes"; then - output_verbose_link_cmd=echo - archive_cmds="\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring $_lt_dar_single_mod${_lt_dsymutil}" - module_cmds="\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dsymutil}" - archive_expsym_cmds="sed 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring ${_lt_dar_single_mod}${_lt_dar_export_syms}${_lt_dsymutil}" - module_expsym_cmds="sed -e 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dar_export_syms}${_lt_dsymutil}" - - else - ld_shlibs=no - fi - - ;; - - dgux*) - archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' - hardcode_libdir_flag_spec='-L$libdir' - hardcode_shlibpath_var=no - ;; - - freebsd1*) - ld_shlibs=no - ;; - - # FreeBSD 2.2.[012] allows us to include c++rt0.o to get C++ constructor - # support. Future versions do this automatically, but an explicit c++rt0.o - # does not break anything, and helps significantly (at the cost of a little - # extra space). - freebsd2.2*) - archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags /usr/lib/c++rt0.o' - hardcode_libdir_flag_spec='-R$libdir' - hardcode_direct=yes - hardcode_shlibpath_var=no - ;; - - # Unfortunately, older versions of FreeBSD 2 do not have this feature. - freebsd2*) - archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' - hardcode_direct=yes - hardcode_minus_L=yes - hardcode_shlibpath_var=no - ;; - - # FreeBSD 3 and greater uses gcc -shared to do shared libraries. - freebsd* | dragonfly*) - archive_cmds='$CC -shared -o $lib $libobjs $deplibs $compiler_flags' - hardcode_libdir_flag_spec='-R$libdir' - hardcode_direct=yes - hardcode_shlibpath_var=no - ;; - - hpux9*) - if test "$GCC" = yes; then - archive_cmds='$RM $output_objdir/$soname~$CC -shared -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' - else - archive_cmds='$RM $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' - fi - hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir' - hardcode_libdir_separator=: - hardcode_direct=yes - - # hardcode_minus_L: Not really in the search PATH, - # but as the default location of the library. - hardcode_minus_L=yes - export_dynamic_flag_spec='${wl}-E' - ;; - - hpux10*) - if test "$GCC" = yes -a "$with_gnu_ld" = no; then - archive_cmds='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags' - else - archive_cmds='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags' - fi - if test "$with_gnu_ld" = no; then - hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir' - hardcode_libdir_flag_spec_ld='+b $libdir' - hardcode_libdir_separator=: - hardcode_direct=yes - hardcode_direct_absolute=yes - export_dynamic_flag_spec='${wl}-E' - # hardcode_minus_L: Not really in the search PATH, - # but as the default location of the library. - hardcode_minus_L=yes - fi - ;; - - hpux11*) - if test "$GCC" = yes -a "$with_gnu_ld" = no; then - case $host_cpu in - hppa*64*) - archive_cmds='$CC -shared ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' - ;; - ia64*) - archive_cmds='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags' - ;; - *) - archive_cmds='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags' - ;; - esac - else - case $host_cpu in - hppa*64*) - archive_cmds='$CC -b ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' - ;; - ia64*) - archive_cmds='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags' - ;; - *) - archive_cmds='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags' - ;; - esac - fi - if test "$with_gnu_ld" = no; then - hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir' - hardcode_libdir_separator=: - - case $host_cpu in - hppa*64*|ia64*) - hardcode_direct=no - hardcode_shlibpath_var=no - ;; - *) - hardcode_direct=yes - hardcode_direct_absolute=yes - export_dynamic_flag_spec='${wl}-E' - - # hardcode_minus_L: Not really in the search PATH, - # but as the default location of the library. - hardcode_minus_L=yes - ;; - esac - fi - ;; - - irix5* | irix6* | nonstopux*) - if test "$GCC" = yes; then - archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' - # Try to use the -exported_symbol ld option, if it does not - # work, assume that -exports_file does not work either and - # implicitly export all symbols. - save_LDFLAGS="$LDFLAGS" - LDFLAGS="$LDFLAGS -shared ${wl}-exported_symbol ${wl}foo ${wl}-update_registry ${wl}/dev/null" - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -int foo(void) {} -_ACEOF -if ac_fn_c_try_link "$LINENO"; then : - archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations ${wl}-exports_file ${wl}$export_symbols -o $lib' - -fi -rm -f core conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext - LDFLAGS="$save_LDFLAGS" - else - archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib' - archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -exports_file $export_symbols -o $lib' - fi - archive_cmds_need_lc='no' - hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' - hardcode_libdir_separator=: - inherit_rpath=yes - link_all_deplibs=yes - ;; - - netbsd*) - if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then - archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' # a.out - else - archive_cmds='$LD -shared -o $lib $libobjs $deplibs $linker_flags' # ELF - fi - hardcode_libdir_flag_spec='-R$libdir' - hardcode_direct=yes - hardcode_shlibpath_var=no - ;; - - newsos6) - archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' - hardcode_direct=yes - hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' - hardcode_libdir_separator=: - hardcode_shlibpath_var=no - ;; - - *nto* | *qnx*) - ;; - - openbsd*) - if test -f /usr/libexec/ld.so; then - hardcode_direct=yes - hardcode_shlibpath_var=no - hardcode_direct_absolute=yes - if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then - archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags' - archive_expsym_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-retain-symbols-file,$export_symbols' - hardcode_libdir_flag_spec='${wl}-rpath,$libdir' - export_dynamic_flag_spec='${wl}-E' - else - case $host_os in - openbsd[01].* | openbsd2.[0-7] | openbsd2.[0-7].*) - archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' - hardcode_libdir_flag_spec='-R$libdir' - ;; - *) - archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags' - hardcode_libdir_flag_spec='${wl}-rpath,$libdir' - ;; - esac - fi - else - ld_shlibs=no - fi - ;; - - os2*) - hardcode_libdir_flag_spec='-L$libdir' - hardcode_minus_L=yes - allow_undefined_flag=unsupported - archive_cmds='$ECHO "LIBRARY $libname INITINSTANCE" > $output_objdir/$libname.def~$ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~$ECHO DATA >> $output_objdir/$libname.def~$ECHO " SINGLE NONSHARED" >> $output_objdir/$libname.def~$ECHO EXPORTS >> $output_objdir/$libname.def~emxexp $libobjs >> $output_objdir/$libname.def~$CC -Zdll -Zcrtdll -o $lib $libobjs $deplibs $compiler_flags $output_objdir/$libname.def' - old_archive_from_new_cmds='emximp -o $output_objdir/$libname.a $output_objdir/$libname.def' - ;; - - osf3*) - if test "$GCC" = yes; then - allow_undefined_flag=' ${wl}-expect_unresolved ${wl}\*' - archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' - else - allow_undefined_flag=' -expect_unresolved \*' - archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib' - fi - archive_cmds_need_lc='no' - hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' - hardcode_libdir_separator=: - ;; - - osf4* | osf5*) # as osf3* with the addition of -msym flag - if test "$GCC" = yes; then - allow_undefined_flag=' ${wl}-expect_unresolved ${wl}\*' - archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' - hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' - else - allow_undefined_flag=' -expect_unresolved \*' - archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags -msym -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib' - archive_expsym_cmds='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done; printf "%s\\n" "-hidden">> $lib.exp~ - $CC -shared${allow_undefined_flag} ${wl}-input ${wl}$lib.exp $compiler_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib~$RM $lib.exp' - - # Both c and cxx compiler support -rpath directly - hardcode_libdir_flag_spec='-rpath $libdir' - fi - archive_cmds_need_lc='no' - hardcode_libdir_separator=: - ;; - - solaris*) - no_undefined_flag=' -z defs' - if test "$GCC" = yes; then - wlarc='${wl}' - archive_cmds='$CC -shared ${wl}-z ${wl}text ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' - archive_expsym_cmds='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~ - $CC -shared ${wl}-z ${wl}text ${wl}-M ${wl}$lib.exp ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp' - else - case `$CC -V 2>&1` in - *"Compilers 5.0"*) - wlarc='' - archive_cmds='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags' - archive_expsym_cmds='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~ - $LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$RM $lib.exp' - ;; - *) - wlarc='${wl}' - archive_cmds='$CC -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $compiler_flags' - archive_expsym_cmds='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~ - $CC -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp' - ;; - esac - fi - hardcode_libdir_flag_spec='-R$libdir' - hardcode_shlibpath_var=no - case $host_os in - solaris2.[0-5] | solaris2.[0-5].*) ;; - *) - # The compiler driver will combine and reorder linker options, - # but understands `-z linker_flag'. GCC discards it without `$wl', - # but is careful enough not to reorder. - # Supported since Solaris 2.6 (maybe 2.5.1?) - if test "$GCC" = yes; then - whole_archive_flag_spec='${wl}-z ${wl}allextract$convenience ${wl}-z ${wl}defaultextract' - else - whole_archive_flag_spec='-z allextract$convenience -z defaultextract' - fi - ;; - esac - link_all_deplibs=yes - ;; - - sunos4*) - if test "x$host_vendor" = xsequent; then - # Use $CC to link under sequent, because it throws in some extra .o - # files that make .init and .fini sections work. - archive_cmds='$CC -G ${wl}-h $soname -o $lib $libobjs $deplibs $compiler_flags' - else - archive_cmds='$LD -assert pure-text -Bstatic -o $lib $libobjs $deplibs $linker_flags' - fi - hardcode_libdir_flag_spec='-L$libdir' - hardcode_direct=yes - hardcode_minus_L=yes - hardcode_shlibpath_var=no - ;; - - sysv4) - case $host_vendor in - sni) - archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' - hardcode_direct=yes # is this really true??? - ;; - siemens) - ## LD is ld it makes a PLAMLIB - ## CC just makes a GrossModule. - archive_cmds='$LD -G -o $lib $libobjs $deplibs $linker_flags' - reload_cmds='$CC -r -o $output$reload_objs' - hardcode_direct=no - ;; - motorola) - archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' - hardcode_direct=no #Motorola manual says yes, but my tests say they lie - ;; - esac - runpath_var='LD_RUN_PATH' - hardcode_shlibpath_var=no - ;; - - sysv4.3*) - archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' - hardcode_shlibpath_var=no - export_dynamic_flag_spec='-Bexport' - ;; - - sysv4*MP*) - if test -d /usr/nec; then - archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' - hardcode_shlibpath_var=no - runpath_var=LD_RUN_PATH - hardcode_runpath_var=yes - ld_shlibs=yes - fi - ;; - - sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[01].[10]* | unixware7* | sco3.2v5.0.[024]*) - no_undefined_flag='${wl}-z,text' - archive_cmds_need_lc=no - hardcode_shlibpath_var=no - runpath_var='LD_RUN_PATH' - - if test "$GCC" = yes; then - archive_cmds='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' - archive_expsym_cmds='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' - else - archive_cmds='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' - archive_expsym_cmds='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' - fi - ;; - - sysv5* | sco3.2v5* | sco5v6*) - # Note: We can NOT use -z defs as we might desire, because we do not - # link with -lc, and that would cause any symbols used from libc to - # always be unresolved, which means just about no library would - # ever link correctly. If we're not using GNU ld we use -z text - # though, which does catch some bad symbols but isn't as heavy-handed - # as -z defs. - no_undefined_flag='${wl}-z,text' - allow_undefined_flag='${wl}-z,nodefs' - archive_cmds_need_lc=no - hardcode_shlibpath_var=no - hardcode_libdir_flag_spec='${wl}-R,$libdir' - hardcode_libdir_separator=':' - link_all_deplibs=yes - export_dynamic_flag_spec='${wl}-Bexport' - runpath_var='LD_RUN_PATH' - - if test "$GCC" = yes; then - archive_cmds='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' - archive_expsym_cmds='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' - else - archive_cmds='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' - archive_expsym_cmds='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' - fi - ;; - - uts4*) - archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' - hardcode_libdir_flag_spec='-L$libdir' - hardcode_shlibpath_var=no - ;; - - *) - ld_shlibs=no - ;; - esac - - if test x$host_vendor = xsni; then - case $host in - sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*) - export_dynamic_flag_spec='${wl}-Blargedynsym' - ;; - esac - fi - fi - -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ld_shlibs" >&5 -$as_echo "$ld_shlibs" >&6; } -test "$ld_shlibs" = no && can_build_shared=no - -with_gnu_ld=$with_gnu_ld - - - - - - - - - - - - - - - -# -# Do we need to explicitly link libc? -# -case "x$archive_cmds_need_lc" in -x|xyes) - # Assume -lc should be added - archive_cmds_need_lc=yes - - if test "$enable_shared" = yes && test "$GCC" = yes; then - case $archive_cmds in - *'~'*) - # FIXME: we may have to deal with multi-command sequences. - ;; - '$CC '*) - # Test whether the compiler implicitly links with -lc since on some - # systems, -lgcc has to come before -lc. If gcc already passes -lc - # to ld, don't add -lc before -lgcc. - { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether -lc should be explicitly linked in" >&5 -$as_echo_n "checking whether -lc should be explicitly linked in... " >&6; } - $RM conftest* - echo "$lt_simple_compile_test_code" > conftest.$ac_ext - - if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5 - (eval $ac_compile) 2>&5 - ac_status=$? - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; } 2>conftest.err; then - soname=conftest - lib=conftest - libobjs=conftest.$ac_objext - deplibs= - wl=$lt_prog_compiler_wl - pic_flag=$lt_prog_compiler_pic - compiler_flags=-v - linker_flags=-v - verstring= - output_objdir=. - libname=conftest - lt_save_allow_undefined_flag=$allow_undefined_flag - allow_undefined_flag= - if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$archive_cmds 2\>\&1 \| $GREP \" -lc \" \>/dev/null 2\>\&1\""; } >&5 - (eval $archive_cmds 2\>\&1 \| $GREP \" -lc \" \>/dev/null 2\>\&1) 2>&5 - ac_status=$? - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; } - then - archive_cmds_need_lc=no - else - archive_cmds_need_lc=yes - fi - allow_undefined_flag=$lt_save_allow_undefined_flag - else - cat conftest.err 1>&5 - fi - $RM conftest* - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $archive_cmds_need_lc" >&5 -$as_echo "$archive_cmds_need_lc" >&6; } - ;; - esac - fi - ;; -esac - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - { $as_echo "$as_me:${as_lineno-$LINENO}: checking dynamic linker characteristics" >&5 -$as_echo_n "checking dynamic linker characteristics... " >&6; } - -if test "$GCC" = yes; then - case $host_os in - darwin*) lt_awk_arg="/^libraries:/,/LR/" ;; - *) lt_awk_arg="/^libraries:/" ;; - esac - lt_search_path_spec=`$CC -print-search-dirs | awk $lt_awk_arg | $SED -e "s/^libraries://" -e "s,=/,/,g"` - if $ECHO "$lt_search_path_spec" | $GREP ';' >/dev/null ; then - # if the path contains ";" then we assume it to be the separator - # otherwise default to the standard path separator (i.e. ":") - it is - # assumed that no part of a normal pathname contains ";" but that should - # okay in the real world where ";" in dirpaths is itself problematic. - lt_search_path_spec=`$ECHO "$lt_search_path_spec" | $SED -e 's/;/ /g'` - else - lt_search_path_spec=`$ECHO "$lt_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"` - fi - # Ok, now we have the path, separated by spaces, we can step through it - # and add multilib dir if necessary. - lt_tmp_lt_search_path_spec= - lt_multi_os_dir=`$CC $CPPFLAGS $CFLAGS $LDFLAGS -print-multi-os-directory 2>/dev/null` - for lt_sys_path in $lt_search_path_spec; do - if test -d "$lt_sys_path/$lt_multi_os_dir"; then - lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path/$lt_multi_os_dir" - else - test -d "$lt_sys_path" && \ - lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path" - fi - done - lt_search_path_spec=`$ECHO $lt_tmp_lt_search_path_spec | awk ' -BEGIN {RS=" "; FS="/|\n";} { - lt_foo=""; - lt_count=0; - for (lt_i = NF; lt_i > 0; lt_i--) { - if ($lt_i != "" && $lt_i != ".") { - if ($lt_i == "..") { - lt_count++; - } else { - if (lt_count == 0) { - lt_foo="/" $lt_i lt_foo; - } else { - lt_count--; - } - } - } - } - if (lt_foo != "") { lt_freq[lt_foo]++; } - if (lt_freq[lt_foo] == 1) { print lt_foo; } -}'` - sys_lib_search_path_spec=`$ECHO $lt_search_path_spec` -else - sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib" -fi -library_names_spec= -libname_spec='lib$name' -soname_spec= -shrext_cmds=".so" -postinstall_cmds= -postuninstall_cmds= -finish_cmds= -finish_eval= -shlibpath_var= -shlibpath_overrides_runpath=unknown -version_type=none -dynamic_linker="$host_os ld.so" -sys_lib_dlsearch_path_spec="/lib /usr/lib" -need_lib_prefix=unknown -hardcode_into_libs=no - -# when you set need_version to no, make sure it does not cause -set_version -# flags to be left without arguments -need_version=unknown - -case $host_os in -aix3*) - version_type=linux - library_names_spec='${libname}${release}${shared_ext}$versuffix $libname.a' - shlibpath_var=LIBPATH - - # AIX 3 has no versioning support, so we append a major version to the name. - soname_spec='${libname}${release}${shared_ext}$major' - ;; - -aix[4-9]*) - version_type=linux - need_lib_prefix=no - need_version=no - hardcode_into_libs=yes - if test "$host_cpu" = ia64; then - # AIX 5 supports IA64 - library_names_spec='${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext}$versuffix $libname${shared_ext}' - shlibpath_var=LD_LIBRARY_PATH - else - # With GCC up to 2.95.x, collect2 would create an import file - # for dependence libraries. The import file would start with - # the line `#! .'. This would cause the generated library to - # depend on `.', always an invalid library. This was fixed in - # development snapshots of GCC prior to 3.0. - case $host_os in - aix4 | aix4.[01] | aix4.[01].*) - if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)' - echo ' yes ' - echo '#endif'; } | ${CC} -E - | $GREP yes > /dev/null; then - : - else - can_build_shared=no - fi - ;; - esac - # AIX (on Power*) has no versioning support, so currently we can not hardcode correct - # soname into executable. Probably we can add versioning support to - # collect2, so additional links can be useful in future. - if test "$aix_use_runtimelinking" = yes; then - # If using run time linking (on AIX 4.2 or later) use lib<name>.so - # instead of lib<name>.a to let people know that these are not - # typical AIX shared libraries. - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - else - # We preserve .a as extension for shared libraries through AIX4.2 - # and later when we are not doing run time linking. - library_names_spec='${libname}${release}.a $libname.a' - soname_spec='${libname}${release}${shared_ext}$major' - fi - shlibpath_var=LIBPATH - fi - ;; - -amigaos*) - case $host_cpu in - powerpc) - # Since July 2007 AmigaOS4 officially supports .so libraries. - # When compiling the executable, add -use-dynld -Lsobjs: to the compileline. - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - ;; - m68k) - library_names_spec='$libname.ixlibrary $libname.a' - # Create ${libname}_ixlibrary.a entries in /sys/libs. - finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`$ECHO "X$lib" | $Xsed -e '\''s%^.*/\([^/]*\)\.ixlibrary$%\1%'\''`; test $RM /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done' - ;; - esac - ;; - -beos*) - library_names_spec='${libname}${shared_ext}' - dynamic_linker="$host_os ld.so" - shlibpath_var=LIBRARY_PATH - ;; - -bsdi[45]*) - version_type=linux - need_version=no - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - finish_cmds='PATH="\$PATH:/sbin" ldconfig $libdir' - shlibpath_var=LD_LIBRARY_PATH - sys_lib_search_path_spec="/shlib /usr/lib /usr/X11/lib /usr/contrib/lib /lib /usr/local/lib" - sys_lib_dlsearch_path_spec="/shlib /usr/lib /usr/local/lib" - # the default ld.so.conf also contains /usr/contrib/lib and - # /usr/X11R6/lib (/usr/X11 is a link to /usr/X11R6), but let us allow - # libtool to hard-code these into programs - ;; - -cygwin* | mingw* | pw32* | cegcc*) - version_type=windows - shrext_cmds=".dll" - need_version=no - need_lib_prefix=no - - case $GCC,$host_os in - yes,cygwin* | yes,mingw* | yes,pw32* | yes,cegcc*) - library_names_spec='$libname.dll.a' - # DLL is installed to $(libdir)/../bin by postinstall_cmds - postinstall_cmds='base_file=`basename \${file}`~ - dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i; echo \$dlname'\''`~ - dldir=$destdir/`dirname \$dlpath`~ - test -d \$dldir || mkdir -p \$dldir~ - $install_prog $dir/$dlname \$dldir/$dlname~ - chmod a+x \$dldir/$dlname~ - if test -n '\''$stripme'\'' && test -n '\''$striplib'\''; then - eval '\''$striplib \$dldir/$dlname'\'' || exit \$?; - fi' - postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~ - dlpath=$dir/\$dldll~ - $RM \$dlpath' - shlibpath_overrides_runpath=yes - - case $host_os in - cygwin*) - # Cygwin DLLs use 'cyg' prefix rather than 'lib' - soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}' - sys_lib_search_path_spec="/usr/lib /lib/w32api /lib /usr/local/lib" - ;; - mingw* | cegcc*) - # MinGW DLLs use traditional 'lib' prefix - soname_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}' - sys_lib_search_path_spec=`$CC -print-search-dirs | $GREP "^libraries:" | $SED -e "s/^libraries://" -e "s,=/,/,g"` - if $ECHO "$sys_lib_search_path_spec" | $GREP ';[c-zC-Z]:/' >/dev/null; then - # It is most probably a Windows format PATH printed by - # mingw gcc, but we are running on Cygwin. Gcc prints its search - # path with ; separators, and with drive letters. We can handle the - # drive letters (cygwin fileutils understands them), so leave them, - # especially as we might pass files found there to a mingw objdump, - # which wouldn't understand a cygwinified path. Ahh. - sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'` - else - sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"` - fi - ;; - pw32*) - # pw32 DLLs use 'pw' prefix rather than 'lib' - library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}' - ;; - esac - ;; - - *) - library_names_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext} $libname.lib' - ;; - esac - dynamic_linker='Win32 ld.exe' - # FIXME: first we should search . and the directory the executable is in - shlibpath_var=PATH - ;; - -darwin* | rhapsody*) - dynamic_linker="$host_os dyld" - version_type=darwin - need_lib_prefix=no - need_version=no - library_names_spec='${libname}${release}${major}$shared_ext ${libname}$shared_ext' - soname_spec='${libname}${release}${major}$shared_ext' - shlibpath_overrides_runpath=yes - shlibpath_var=DYLD_LIBRARY_PATH - shrext_cmds='`test .$module = .yes && echo .so || echo .dylib`' - - sys_lib_search_path_spec="$sys_lib_search_path_spec /usr/local/lib" - sys_lib_dlsearch_path_spec='/usr/local/lib /lib /usr/lib' - ;; - -dgux*) - version_type=linux - need_lib_prefix=no - need_version=no - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname$shared_ext' - soname_spec='${libname}${release}${shared_ext}$major' - shlibpath_var=LD_LIBRARY_PATH - ;; - -freebsd1*) - dynamic_linker=no - ;; - -freebsd* | dragonfly*) - # DragonFly does not have aout. When/if they implement a new - # versioning mechanism, adjust this. - if test -x /usr/bin/objformat; then - objformat=`/usr/bin/objformat` - else - case $host_os in - freebsd[123]*) objformat=aout ;; - *) objformat=elf ;; - esac - fi - version_type=freebsd-$objformat - case $version_type in - freebsd-elf*) - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}' - need_version=no - need_lib_prefix=no - ;; - freebsd-*) - library_names_spec='${libname}${release}${shared_ext}$versuffix $libname${shared_ext}$versuffix' - need_version=yes - ;; - esac - shlibpath_var=LD_LIBRARY_PATH - case $host_os in - freebsd2*) - shlibpath_overrides_runpath=yes - ;; - freebsd3.[01]* | freebsdelf3.[01]*) - shlibpath_overrides_runpath=yes - hardcode_into_libs=yes - ;; - freebsd3.[2-9]* | freebsdelf3.[2-9]* | \ - freebsd4.[0-5] | freebsdelf4.[0-5] | freebsd4.1.1 | freebsdelf4.1.1) - shlibpath_overrides_runpath=no - hardcode_into_libs=yes - ;; - *) # from 4.6 on, and DragonFly - shlibpath_overrides_runpath=yes - hardcode_into_libs=yes - ;; - esac - ;; - -gnu*) - version_type=linux - need_lib_prefix=no - need_version=no - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - shlibpath_var=LD_LIBRARY_PATH - hardcode_into_libs=yes - ;; - -hpux9* | hpux10* | hpux11*) - # Give a soname corresponding to the major version so that dld.sl refuses to - # link against other versions. - version_type=sunos - need_lib_prefix=no - need_version=no - case $host_cpu in - ia64*) - shrext_cmds='.so' - hardcode_into_libs=yes - dynamic_linker="$host_os dld.so" - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=yes # Unless +noenvvar is specified. - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - if test "X$HPUX_IA64_MODE" = X32; then - sys_lib_search_path_spec="/usr/lib/hpux32 /usr/local/lib/hpux32 /usr/local/lib" - else - sys_lib_search_path_spec="/usr/lib/hpux64 /usr/local/lib/hpux64" - fi - sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec - ;; - hppa*64*) - shrext_cmds='.sl' - hardcode_into_libs=yes - dynamic_linker="$host_os dld.sl" - shlibpath_var=LD_LIBRARY_PATH # How should we handle SHLIB_PATH - shlibpath_overrides_runpath=yes # Unless +noenvvar is specified. - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - sys_lib_search_path_spec="/usr/lib/pa20_64 /usr/ccs/lib/pa20_64" - sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec - ;; - *) - shrext_cmds='.sl' - dynamic_linker="$host_os dld.sl" - shlibpath_var=SHLIB_PATH - shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - ;; - esac - # HP-UX runs *really* slowly unless shared libraries are mode 555. - postinstall_cmds='chmod 555 $lib' - ;; - -interix[3-9]*) - version_type=linux - need_lib_prefix=no - need_version=no - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - dynamic_linker='Interix 3.x ld.so.1 (PE, like ELF)' - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=no - hardcode_into_libs=yes - ;; - -irix5* | irix6* | nonstopux*) - case $host_os in - nonstopux*) version_type=nonstopux ;; - *) - if test "$lt_cv_prog_gnu_ld" = yes; then - version_type=linux - else - version_type=irix - fi ;; - esac - need_lib_prefix=no - need_version=no - soname_spec='${libname}${release}${shared_ext}$major' - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext} $libname${shared_ext}' - case $host_os in - irix5* | nonstopux*) - libsuff= shlibsuff= - ;; - *) - case $LD in # libtool.m4 will add one of these switches to LD - *-32|*"-32 "|*-melf32bsmip|*"-melf32bsmip ") - libsuff= shlibsuff= libmagic=32-bit;; - *-n32|*"-n32 "|*-melf32bmipn32|*"-melf32bmipn32 ") - libsuff=32 shlibsuff=N32 libmagic=N32;; - *-64|*"-64 "|*-melf64bmip|*"-melf64bmip ") - libsuff=64 shlibsuff=64 libmagic=64-bit;; - *) libsuff= shlibsuff= libmagic=never-match;; - esac - ;; - esac - shlibpath_var=LD_LIBRARY${shlibsuff}_PATH - shlibpath_overrides_runpath=no - sys_lib_search_path_spec="/usr/lib${libsuff} /lib${libsuff} /usr/local/lib${libsuff}" - sys_lib_dlsearch_path_spec="/usr/lib${libsuff} /lib${libsuff}" - hardcode_into_libs=yes - ;; - -# No shared lib support for Linux oldld, aout, or coff. -linux*oldld* | linux*aout* | linux*coff*) - dynamic_linker=no - ;; - -# This must be Linux ELF. -linux* | k*bsd*-gnu) - version_type=linux - need_lib_prefix=no - need_version=no - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir' - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=no - # Some binutils ld are patched to set DT_RUNPATH - save_LDFLAGS=$LDFLAGS - save_libdir=$libdir - eval "libdir=/foo; wl=\"$lt_prog_compiler_wl\"; \ - LDFLAGS=\"\$LDFLAGS $hardcode_libdir_flag_spec\"" - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - -int -main () -{ - - ; - return 0; -} -_ACEOF -if ac_fn_c_try_link "$LINENO"; then : - if ($OBJDUMP -p conftest$ac_exeext) 2>/dev/null | grep "RUNPATH.*$libdir" >/dev/null; then : - shlibpath_overrides_runpath=yes -fi -fi -rm -f core conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext - LDFLAGS=$save_LDFLAGS - libdir=$save_libdir - - # This implies no fast_install, which is unacceptable. - # Some rework will be needed to allow for fast_install - # before this can be enabled. - hardcode_into_libs=yes - - # Add ABI-specific directories to the system library path. - sys_lib_dlsearch_path_spec="/lib64 /usr/lib64 /lib /usr/lib" - - # Append ld.so.conf contents to the search path - if test -f /etc/ld.so.conf; then - lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s 2>/dev/null", \$2)); skip = 1; } { if (!skip) print \$0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;/^[ ]*hwcap[ ]/d;s/[:, ]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;/^$/d' | tr '\n' ' '` - sys_lib_dlsearch_path_spec="$sys_lib_dlsearch_path_spec $lt_ld_extra" - fi - - # We used to test for /lib/ld.so.1 and disable shared libraries on - # powerpc, because MkLinux only supported shared libraries with the - # GNU dynamic linker. Since this was broken with cross compilers, - # most powerpc-linux boxes support dynamic linking these days and - # people can always --disable-shared, the test was removed, and we - # assume the GNU/Linux dynamic linker is in use. - dynamic_linker='GNU/Linux ld.so' - ;; - -netbsd*) - version_type=sunos - need_lib_prefix=no - need_version=no - if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' - finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir' - dynamic_linker='NetBSD (a.out) ld.so' - else - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - dynamic_linker='NetBSD ld.elf_so' - fi - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=yes - hardcode_into_libs=yes - ;; - -newsos6) - version_type=linux - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=yes - ;; - -*nto* | *qnx*) - version_type=qnx - need_lib_prefix=no - need_version=no - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=no - hardcode_into_libs=yes - dynamic_linker='ldqnx.so' - ;; - -openbsd*) - version_type=sunos - sys_lib_dlsearch_path_spec="/usr/lib" - need_lib_prefix=no - # Some older versions of OpenBSD (3.3 at least) *do* need versioned libs. - case $host_os in - openbsd3.3 | openbsd3.3.*) need_version=yes ;; - *) need_version=no ;; - esac - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' - finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir' - shlibpath_var=LD_LIBRARY_PATH - if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then - case $host_os in - openbsd2.[89] | openbsd2.[89].*) - shlibpath_overrides_runpath=no - ;; - *) - shlibpath_overrides_runpath=yes - ;; - esac - else - shlibpath_overrides_runpath=yes - fi - ;; - -os2*) - libname_spec='$name' - shrext_cmds=".dll" - need_lib_prefix=no - library_names_spec='$libname${shared_ext} $libname.a' - dynamic_linker='OS/2 ld.exe' - shlibpath_var=LIBPATH - ;; - -osf3* | osf4* | osf5*) - version_type=osf - need_lib_prefix=no - need_version=no - soname_spec='${libname}${release}${shared_ext}$major' - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - shlibpath_var=LD_LIBRARY_PATH - sys_lib_search_path_spec="/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib" - sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec" - ;; - -rdos*) - dynamic_linker=no - ;; - -solaris*) - version_type=linux - need_lib_prefix=no - need_version=no - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=yes - hardcode_into_libs=yes - # ldd complains unless libraries are executable - postinstall_cmds='chmod +x $lib' - ;; - -sunos4*) - version_type=sunos - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' - finish_cmds='PATH="\$PATH:/usr/etc" ldconfig $libdir' - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=yes - if test "$with_gnu_ld" = yes; then - need_lib_prefix=no - fi - need_version=yes - ;; - -sysv4 | sysv4.3*) - version_type=linux - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - shlibpath_var=LD_LIBRARY_PATH - case $host_vendor in - sni) - shlibpath_overrides_runpath=no - need_lib_prefix=no - runpath_var=LD_RUN_PATH - ;; - siemens) - need_lib_prefix=no - ;; - motorola) - need_lib_prefix=no - need_version=no - shlibpath_overrides_runpath=no - sys_lib_search_path_spec='/lib /usr/lib /usr/ccs/lib' - ;; - esac - ;; - -sysv4*MP*) - if test -d /usr/nec ;then - version_type=linux - library_names_spec='$libname${shared_ext}.$versuffix $libname${shared_ext}.$major $libname${shared_ext}' - soname_spec='$libname${shared_ext}.$major' - shlibpath_var=LD_LIBRARY_PATH - fi - ;; - -sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*) - version_type=freebsd-elf - need_lib_prefix=no - need_version=no - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=yes - hardcode_into_libs=yes - if test "$with_gnu_ld" = yes; then - sys_lib_search_path_spec='/usr/local/lib /usr/gnu/lib /usr/ccs/lib /usr/lib /lib' - else - sys_lib_search_path_spec='/usr/ccs/lib /usr/lib' - case $host_os in - sco3.2v5*) - sys_lib_search_path_spec="$sys_lib_search_path_spec /lib" - ;; - esac - fi - sys_lib_dlsearch_path_spec='/usr/lib' - ;; - -tpf*) - # TPF is a cross-target only. Preferred cross-host = GNU/Linux. - version_type=linux - need_lib_prefix=no - need_version=no - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=no - hardcode_into_libs=yes - ;; - -uts4*) - version_type=linux - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - shlibpath_var=LD_LIBRARY_PATH - ;; - -*) - dynamic_linker=no - ;; -esac -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $dynamic_linker" >&5 -$as_echo "$dynamic_linker" >&6; } -test "$dynamic_linker" = no && can_build_shared=no - -variables_saved_for_relink="PATH $shlibpath_var $runpath_var" -if test "$GCC" = yes; then - variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH" -fi - -if test "${lt_cv_sys_lib_search_path_spec+set}" = set; then - sys_lib_search_path_spec="$lt_cv_sys_lib_search_path_spec" -fi -if test "${lt_cv_sys_lib_dlsearch_path_spec+set}" = set; then - sys_lib_dlsearch_path_spec="$lt_cv_sys_lib_dlsearch_path_spec" -fi - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - { $as_echo "$as_me:${as_lineno-$LINENO}: checking how to hardcode library paths into programs" >&5 -$as_echo_n "checking how to hardcode library paths into programs... " >&6; } -hardcode_action= -if test -n "$hardcode_libdir_flag_spec" || - test -n "$runpath_var" || - test "X$hardcode_automatic" = "Xyes" ; then - - # We can hardcode non-existent directories. - if test "$hardcode_direct" != no && - # If the only mechanism to avoid hardcoding is shlibpath_var, we - # have to relink, otherwise we might link with an installed library - # when we should be linking with a yet-to-be-installed one - ## test "$_LT_TAGVAR(hardcode_shlibpath_var, )" != no && - test "$hardcode_minus_L" != no; then - # Linking always hardcodes the temporary library directory. - hardcode_action=relink - else - # We can link without hardcoding, and we can hardcode nonexisting dirs. - hardcode_action=immediate - fi -else - # We cannot hardcode anything, or else we can only hardcode existing - # directories. - hardcode_action=unsupported -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $hardcode_action" >&5 -$as_echo "$hardcode_action" >&6; } - -if test "$hardcode_action" = relink || - test "$inherit_rpath" = yes; then - # Fast installation is not supported - enable_fast_install=no -elif test "$shlibpath_overrides_runpath" = yes || - test "$enable_shared" = no; then - # Fast installation is not necessary - enable_fast_install=needless -fi - - - - - - - if test "x$enable_dlopen" != xyes; then - enable_dlopen=unknown - enable_dlopen_self=unknown - enable_dlopen_self_static=unknown -else - lt_cv_dlopen=no - lt_cv_dlopen_libs= - - case $host_os in - beos*) - lt_cv_dlopen="load_add_on" - lt_cv_dlopen_libs= - lt_cv_dlopen_self=yes - ;; - - mingw* | pw32* | cegcc*) - lt_cv_dlopen="LoadLibrary" - lt_cv_dlopen_libs= - ;; - - cygwin*) - lt_cv_dlopen="dlopen" - lt_cv_dlopen_libs= - ;; - - darwin*) - # if libdl is installed we need to link against it - { $as_echo "$as_me:${as_lineno-$LINENO}: checking for dlopen in -ldl" >&5 -$as_echo_n "checking for dlopen in -ldl... " >&6; } -if test "${ac_cv_lib_dl_dlopen+set}" = set; then : - $as_echo_n "(cached) " >&6 -else - ac_check_lib_save_LIBS=$LIBS -LIBS="-ldl $LIBS" -cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - -/* Override any GCC internal prototype to avoid an error. - Use char because int might match the return type of a GCC - builtin and then its argument prototype would still apply. */ -#ifdef __cplusplus -extern "C" -#endif -char dlopen (); -int -main () -{ -return dlopen (); - ; - return 0; -} -_ACEOF -if ac_fn_c_try_link "$LINENO"; then : - ac_cv_lib_dl_dlopen=yes -else - ac_cv_lib_dl_dlopen=no -fi -rm -f core conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext -LIBS=$ac_check_lib_save_LIBS -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_dl_dlopen" >&5 -$as_echo "$ac_cv_lib_dl_dlopen" >&6; } -if test "x$ac_cv_lib_dl_dlopen" = x""yes; then : - lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl" -else - - lt_cv_dlopen="dyld" - lt_cv_dlopen_libs= - lt_cv_dlopen_self=yes - -fi - - ;; - - *) - ac_fn_c_check_func "$LINENO" "shl_load" "ac_cv_func_shl_load" -if test "x$ac_cv_func_shl_load" = x""yes; then : - lt_cv_dlopen="shl_load" -else - { $as_echo "$as_me:${as_lineno-$LINENO}: checking for shl_load in -ldld" >&5 -$as_echo_n "checking for shl_load in -ldld... " >&6; } -if test "${ac_cv_lib_dld_shl_load+set}" = set; then : - $as_echo_n "(cached) " >&6 -else - ac_check_lib_save_LIBS=$LIBS -LIBS="-ldld $LIBS" -cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - -/* Override any GCC internal prototype to avoid an error. - Use char because int might match the return type of a GCC - builtin and then its argument prototype would still apply. */ -#ifdef __cplusplus -extern "C" -#endif -char shl_load (); -int -main () -{ -return shl_load (); - ; - return 0; -} -_ACEOF -if ac_fn_c_try_link "$LINENO"; then : - ac_cv_lib_dld_shl_load=yes -else - ac_cv_lib_dld_shl_load=no -fi -rm -f core conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext -LIBS=$ac_check_lib_save_LIBS -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_dld_shl_load" >&5 -$as_echo "$ac_cv_lib_dld_shl_load" >&6; } -if test "x$ac_cv_lib_dld_shl_load" = x""yes; then : - lt_cv_dlopen="shl_load" lt_cv_dlopen_libs="-ldld" -else - ac_fn_c_check_func "$LINENO" "dlopen" "ac_cv_func_dlopen" -if test "x$ac_cv_func_dlopen" = x""yes; then : - lt_cv_dlopen="dlopen" -else - { $as_echo "$as_me:${as_lineno-$LINENO}: checking for dlopen in -ldl" >&5 -$as_echo_n "checking for dlopen in -ldl... " >&6; } -if test "${ac_cv_lib_dl_dlopen+set}" = set; then : - $as_echo_n "(cached) " >&6 -else - ac_check_lib_save_LIBS=$LIBS -LIBS="-ldl $LIBS" -cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - -/* Override any GCC internal prototype to avoid an error. - Use char because int might match the return type of a GCC - builtin and then its argument prototype would still apply. */ -#ifdef __cplusplus -extern "C" -#endif -char dlopen (); -int -main () -{ -return dlopen (); - ; - return 0; -} -_ACEOF -if ac_fn_c_try_link "$LINENO"; then : - ac_cv_lib_dl_dlopen=yes -else - ac_cv_lib_dl_dlopen=no -fi -rm -f core conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext -LIBS=$ac_check_lib_save_LIBS -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_dl_dlopen" >&5 -$as_echo "$ac_cv_lib_dl_dlopen" >&6; } -if test "x$ac_cv_lib_dl_dlopen" = x""yes; then : - lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl" -else - { $as_echo "$as_me:${as_lineno-$LINENO}: checking for dlopen in -lsvld" >&5 -$as_echo_n "checking for dlopen in -lsvld... " >&6; } -if test "${ac_cv_lib_svld_dlopen+set}" = set; then : - $as_echo_n "(cached) " >&6 -else - ac_check_lib_save_LIBS=$LIBS -LIBS="-lsvld $LIBS" -cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - -/* Override any GCC internal prototype to avoid an error. - Use char because int might match the return type of a GCC - builtin and then its argument prototype would still apply. */ -#ifdef __cplusplus -extern "C" -#endif -char dlopen (); -int -main () -{ -return dlopen (); - ; - return 0; -} -_ACEOF -if ac_fn_c_try_link "$LINENO"; then : - ac_cv_lib_svld_dlopen=yes -else - ac_cv_lib_svld_dlopen=no -fi -rm -f core conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext -LIBS=$ac_check_lib_save_LIBS -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_svld_dlopen" >&5 -$as_echo "$ac_cv_lib_svld_dlopen" >&6; } -if test "x$ac_cv_lib_svld_dlopen" = x""yes; then : - lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-lsvld" -else - { $as_echo "$as_me:${as_lineno-$LINENO}: checking for dld_link in -ldld" >&5 -$as_echo_n "checking for dld_link in -ldld... " >&6; } -if test "${ac_cv_lib_dld_dld_link+set}" = set; then : - $as_echo_n "(cached) " >&6 -else - ac_check_lib_save_LIBS=$LIBS -LIBS="-ldld $LIBS" -cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - -/* Override any GCC internal prototype to avoid an error. - Use char because int might match the return type of a GCC - builtin and then its argument prototype would still apply. */ -#ifdef __cplusplus -extern "C" -#endif -char dld_link (); -int -main () -{ -return dld_link (); - ; - return 0; -} -_ACEOF -if ac_fn_c_try_link "$LINENO"; then : - ac_cv_lib_dld_dld_link=yes -else - ac_cv_lib_dld_dld_link=no -fi -rm -f core conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext -LIBS=$ac_check_lib_save_LIBS -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_dld_dld_link" >&5 -$as_echo "$ac_cv_lib_dld_dld_link" >&6; } -if test "x$ac_cv_lib_dld_dld_link" = x""yes; then : - lt_cv_dlopen="dld_link" lt_cv_dlopen_libs="-ldld" -fi - - -fi - - -fi - - -fi - - -fi - - -fi - - ;; - esac - - if test "x$lt_cv_dlopen" != xno; then - enable_dlopen=yes - else - enable_dlopen=no - fi - - case $lt_cv_dlopen in - dlopen) - save_CPPFLAGS="$CPPFLAGS" - test "x$ac_cv_header_dlfcn_h" = xyes && CPPFLAGS="$CPPFLAGS -DHAVE_DLFCN_H" - - save_LDFLAGS="$LDFLAGS" - wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $export_dynamic_flag_spec\" - - save_LIBS="$LIBS" - LIBS="$lt_cv_dlopen_libs $LIBS" - - { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether a program can dlopen itself" >&5 -$as_echo_n "checking whether a program can dlopen itself... " >&6; } -if test "${lt_cv_dlopen_self+set}" = set; then : - $as_echo_n "(cached) " >&6 -else - if test "$cross_compiling" = yes; then : - lt_cv_dlopen_self=cross -else - lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 - lt_status=$lt_dlunknown - cat > conftest.$ac_ext <<_LT_EOF -#line 10417 "configure" -#include "confdefs.h" - -#if HAVE_DLFCN_H -#include <dlfcn.h> -#endif - -#include <stdio.h> - -#ifdef RTLD_GLOBAL -# define LT_DLGLOBAL RTLD_GLOBAL -#else -# ifdef DL_GLOBAL -# define LT_DLGLOBAL DL_GLOBAL -# else -# define LT_DLGLOBAL 0 -# endif -#endif - -/* We may have to define LT_DLLAZY_OR_NOW in the command line if we - find out it does not work in some platform. */ -#ifndef LT_DLLAZY_OR_NOW -# ifdef RTLD_LAZY -# define LT_DLLAZY_OR_NOW RTLD_LAZY -# else -# ifdef DL_LAZY -# define LT_DLLAZY_OR_NOW DL_LAZY -# else -# ifdef RTLD_NOW -# define LT_DLLAZY_OR_NOW RTLD_NOW -# else -# ifdef DL_NOW -# define LT_DLLAZY_OR_NOW DL_NOW -# else -# define LT_DLLAZY_OR_NOW 0 -# endif -# endif -# endif -# endif -#endif - -void fnord() { int i=42;} -int main () -{ - void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW); - int status = $lt_dlunknown; - - if (self) - { - if (dlsym (self,"fnord")) status = $lt_dlno_uscore; - else if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore; - /* dlclose (self); */ - } - else - puts (dlerror ()); - - return status; -} -_LT_EOF - if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_link\""; } >&5 - (eval $ac_link) 2>&5 - ac_status=$? - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; } && test -s conftest${ac_exeext} 2>/dev/null; then - (./conftest; exit; ) >&5 2>/dev/null - lt_status=$? - case x$lt_status in - x$lt_dlno_uscore) lt_cv_dlopen_self=yes ;; - x$lt_dlneed_uscore) lt_cv_dlopen_self=yes ;; - x$lt_dlunknown|x*) lt_cv_dlopen_self=no ;; - esac - else : - # compilation failed - lt_cv_dlopen_self=no - fi -fi -rm -fr conftest* - - -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_dlopen_self" >&5 -$as_echo "$lt_cv_dlopen_self" >&6; } - - if test "x$lt_cv_dlopen_self" = xyes; then - wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $lt_prog_compiler_static\" - { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether a statically linked program can dlopen itself" >&5 -$as_echo_n "checking whether a statically linked program can dlopen itself... " >&6; } -if test "${lt_cv_dlopen_self_static+set}" = set; then : - $as_echo_n "(cached) " >&6 -else - if test "$cross_compiling" = yes; then : - lt_cv_dlopen_self_static=cross -else - lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 - lt_status=$lt_dlunknown - cat > conftest.$ac_ext <<_LT_EOF -#line 10513 "configure" -#include "confdefs.h" - -#if HAVE_DLFCN_H -#include <dlfcn.h> -#endif - -#include <stdio.h> - -#ifdef RTLD_GLOBAL -# define LT_DLGLOBAL RTLD_GLOBAL -#else -# ifdef DL_GLOBAL -# define LT_DLGLOBAL DL_GLOBAL -# else -# define LT_DLGLOBAL 0 -# endif -#endif - -/* We may have to define LT_DLLAZY_OR_NOW in the command line if we - find out it does not work in some platform. */ -#ifndef LT_DLLAZY_OR_NOW -# ifdef RTLD_LAZY -# define LT_DLLAZY_OR_NOW RTLD_LAZY -# else -# ifdef DL_LAZY -# define LT_DLLAZY_OR_NOW DL_LAZY -# else -# ifdef RTLD_NOW -# define LT_DLLAZY_OR_NOW RTLD_NOW -# else -# ifdef DL_NOW -# define LT_DLLAZY_OR_NOW DL_NOW -# else -# define LT_DLLAZY_OR_NOW 0 -# endif -# endif -# endif -# endif -#endif - -void fnord() { int i=42;} -int main () -{ - void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW); - int status = $lt_dlunknown; - - if (self) - { - if (dlsym (self,"fnord")) status = $lt_dlno_uscore; - else if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore; - /* dlclose (self); */ - } - else - puts (dlerror ()); - - return status; -} -_LT_EOF - if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_link\""; } >&5 - (eval $ac_link) 2>&5 - ac_status=$? - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; } && test -s conftest${ac_exeext} 2>/dev/null; then - (./conftest; exit; ) >&5 2>/dev/null - lt_status=$? - case x$lt_status in - x$lt_dlno_uscore) lt_cv_dlopen_self_static=yes ;; - x$lt_dlneed_uscore) lt_cv_dlopen_self_static=yes ;; - x$lt_dlunknown|x*) lt_cv_dlopen_self_static=no ;; - esac - else : - # compilation failed - lt_cv_dlopen_self_static=no - fi -fi -rm -fr conftest* - - -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_dlopen_self_static" >&5 -$as_echo "$lt_cv_dlopen_self_static" >&6; } - fi - - CPPFLAGS="$save_CPPFLAGS" - LDFLAGS="$save_LDFLAGS" - LIBS="$save_LIBS" - ;; - esac - - case $lt_cv_dlopen_self in - yes|no) enable_dlopen_self=$lt_cv_dlopen_self ;; - *) enable_dlopen_self=unknown ;; - esac - - case $lt_cv_dlopen_self_static in - yes|no) enable_dlopen_self_static=$lt_cv_dlopen_self_static ;; - *) enable_dlopen_self_static=unknown ;; - esac -fi - - - - - - - - - - - - - - - - - -striplib= -old_striplib= -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether stripping libraries is possible" >&5 -$as_echo_n "checking whether stripping libraries is possible... " >&6; } -if test -n "$STRIP" && $STRIP -V 2>&1 | $GREP "GNU strip" >/dev/null; then - test -z "$old_striplib" && old_striplib="$STRIP --strip-debug" - test -z "$striplib" && striplib="$STRIP --strip-unneeded" - { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 -$as_echo "yes" >&6; } -else -# FIXME - insert some real tests, host_os isn't really good enough - case $host_os in - darwin*) - if test -n "$STRIP" ; then - striplib="$STRIP -x" - old_striplib="$STRIP -S" - { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 -$as_echo "yes" >&6; } - else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } - fi - ;; - *) - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } - ;; - esac -fi - - - - - - - - - - - - - # Report which library types will actually be built - { $as_echo "$as_me:${as_lineno-$LINENO}: checking if libtool supports shared libraries" >&5 -$as_echo_n "checking if libtool supports shared libraries... " >&6; } - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $can_build_shared" >&5 -$as_echo "$can_build_shared" >&6; } - - { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to build shared libraries" >&5 -$as_echo_n "checking whether to build shared libraries... " >&6; } - test "$can_build_shared" = "no" && enable_shared=no - - # On AIX, shared libraries and static libraries use the same namespace, and - # are all built from PIC. - case $host_os in - aix3*) - test "$enable_shared" = yes && enable_static=no - if test -n "$RANLIB"; then - archive_cmds="$archive_cmds~\$RANLIB \$lib" - postinstall_cmds='$RANLIB $lib' - fi - ;; - - aix[4-9]*) - if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then - test "$enable_shared" = yes && enable_static=no - fi - ;; - esac - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $enable_shared" >&5 -$as_echo "$enable_shared" >&6; } - - { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to build static libraries" >&5 -$as_echo_n "checking whether to build static libraries... " >&6; } - # Make sure either enable_shared or enable_static is yes. - test "$enable_shared" = yes || enable_static=yes - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $enable_static" >&5 -$as_echo "$enable_static" >&6; } - - - - -fi -ac_ext=c -ac_cpp='$CPP $CPPFLAGS' -ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' -ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_c_compiler_gnu - -CC="$lt_save_CC" - - - - - - - - - - - - - - ac_config_commands="$ac_config_commands libtool" - - - - -# Only expand once: - - -for ac_func in getisax -do : - ac_fn_c_check_func "$LINENO" "getisax" "ac_cv_func_getisax" -if test "x$ac_cv_func_getisax" = x""yes; then : - cat >>confdefs.h <<_ACEOF -#define HAVE_GETISAX 1 -_ACEOF - -fi -done - - { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether byte ordering is bigendian" >&5 -$as_echo_n "checking whether byte ordering is bigendian... " >&6; } -if test "${ac_cv_c_bigendian+set}" = set; then : - $as_echo_n "(cached) " >&6 -else - ac_cv_c_bigendian=unknown - # See if we're dealing with a universal compiler. - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -#ifndef __APPLE_CC__ - not a universal capable compiler - #endif - typedef int dummy; - -_ACEOF -if ac_fn_c_try_compile "$LINENO"; then : - - # Check for potential -arch flags. It is not universal unless - # there are at least two -arch flags with different values. - ac_arch= - ac_prev= - for ac_word in $CC $CFLAGS $CPPFLAGS $LDFLAGS; do - if test -n "$ac_prev"; then - case $ac_word in - i?86 | x86_64 | ppc | ppc64) - if test -z "$ac_arch" || test "$ac_arch" = "$ac_word"; then - ac_arch=$ac_word - else - ac_cv_c_bigendian=universal - break - fi - ;; - esac - ac_prev= - elif test "x$ac_word" = "x-arch"; then - ac_prev=arch - fi - done -fi -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext - if test $ac_cv_c_bigendian = unknown; then - # See if sys/param.h defines the BYTE_ORDER macro. - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -#include <sys/types.h> - #include <sys/param.h> - -int -main () -{ -#if ! (defined BYTE_ORDER && defined BIG_ENDIAN \ - && defined LITTLE_ENDIAN && BYTE_ORDER && BIG_ENDIAN \ - && LITTLE_ENDIAN) - bogus endian macros - #endif - - ; - return 0; -} -_ACEOF -if ac_fn_c_try_compile "$LINENO"; then : - # It does; now see whether it defined to BIG_ENDIAN or not. - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -#include <sys/types.h> - #include <sys/param.h> - -int -main () -{ -#if BYTE_ORDER != BIG_ENDIAN - not big endian - #endif - - ; - return 0; -} -_ACEOF -if ac_fn_c_try_compile "$LINENO"; then : - ac_cv_c_bigendian=yes -else - ac_cv_c_bigendian=no -fi -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext -fi -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext - fi - if test $ac_cv_c_bigendian = unknown; then - # See if <limits.h> defines _LITTLE_ENDIAN or _BIG_ENDIAN (e.g., Solaris). - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -#include <limits.h> - -int -main () -{ -#if ! (defined _LITTLE_ENDIAN || defined _BIG_ENDIAN) - bogus endian macros - #endif - - ; - return 0; -} -_ACEOF -if ac_fn_c_try_compile "$LINENO"; then : - # It does; now see whether it defined to _BIG_ENDIAN or not. - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -#include <limits.h> - -int -main () -{ -#ifndef _BIG_ENDIAN - not big endian - #endif - - ; - return 0; -} -_ACEOF -if ac_fn_c_try_compile "$LINENO"; then : - ac_cv_c_bigendian=yes -else - ac_cv_c_bigendian=no -fi -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext -fi -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext - fi - if test $ac_cv_c_bigendian = unknown; then - # Compile a test program. - if test "$cross_compiling" = yes; then : - # Try to guess by grepping values from an object file. - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -short int ascii_mm[] = - { 0x4249, 0x4765, 0x6E44, 0x6961, 0x6E53, 0x7953, 0 }; - short int ascii_ii[] = - { 0x694C, 0x5454, 0x656C, 0x6E45, 0x6944, 0x6E61, 0 }; - int use_ascii (int i) { - return ascii_mm[i] + ascii_ii[i]; - } - short int ebcdic_ii[] = - { 0x89D3, 0xE3E3, 0x8593, 0x95C5, 0x89C4, 0x9581, 0 }; - short int ebcdic_mm[] = - { 0xC2C9, 0xC785, 0x95C4, 0x8981, 0x95E2, 0xA8E2, 0 }; - int use_ebcdic (int i) { - return ebcdic_mm[i] + ebcdic_ii[i]; - } - extern int foo; - -int -main () -{ -return use_ascii (foo) == use_ebcdic (foo); - ; - return 0; -} -_ACEOF -if ac_fn_c_try_compile "$LINENO"; then : - if grep BIGenDianSyS conftest.$ac_objext >/dev/null; then - ac_cv_c_bigendian=yes - fi - if grep LiTTleEnDian conftest.$ac_objext >/dev/null ; then - if test "$ac_cv_c_bigendian" = unknown; then - ac_cv_c_bigendian=no - else - # finding both strings is unlikely to happen, but who knows? - ac_cv_c_bigendian=unknown - fi - fi -fi -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext -else - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -$ac_includes_default -int -main () -{ - - /* Are we little or big endian? From Harbison&Steele. */ - union - { - long int l; - char c[sizeof (long int)]; - } u; - u.l = 1; - return u.c[sizeof (long int) - 1] == 1; - - ; - return 0; -} -_ACEOF -if ac_fn_c_try_run "$LINENO"; then : - ac_cv_c_bigendian=no -else - ac_cv_c_bigendian=yes -fi -rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \ - conftest.$ac_objext conftest.beam conftest.$ac_ext -fi - - fi -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_c_bigendian" >&5 -$as_echo "$ac_cv_c_bigendian" >&6; } - case $ac_cv_c_bigendian in #( - yes) - $as_echo "#define WORDS_BIGENDIAN 1" >>confdefs.h -;; #( - no) - ;; #( - universal) - -$as_echo "#define AC_APPLE_UNIVERSAL_BUILD 1" >>confdefs.h - - ;; #( - *) - as_fn_error "unknown endianness - presetting ac_cv_c_bigendian=no (or yes) will help" "$LINENO" 5 ;; - esac - -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for inline" >&5 -$as_echo_n "checking for inline... " >&6; } -if test "${ac_cv_c_inline+set}" = set; then : - $as_echo_n "(cached) " >&6 -else - ac_cv_c_inline=no -for ac_kw in inline __inline__ __inline; do - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -#ifndef __cplusplus -typedef int foo_t; -static $ac_kw foo_t static_foo () {return 0; } -$ac_kw foo_t foo () {return 0; } -#endif - -_ACEOF -if ac_fn_c_try_compile "$LINENO"; then : - ac_cv_c_inline=$ac_kw -fi -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext - test "$ac_cv_c_inline" != no && break -done - -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_c_inline" >&5 -$as_echo "$ac_cv_c_inline" >&6; } - -case $ac_cv_c_inline in - inline | yes) ;; - *) - case $ac_cv_c_inline in - no) ac_val=;; - *) ac_val=$ac_cv_c_inline;; - esac - cat >>confdefs.h <<_ACEOF -#ifndef __cplusplus -#define inline $ac_val -#endif -_ACEOF - ;; -esac - - -# The cast to long int works around a bug in the HP C Compiler -# version HP92453-01 B.11.11.23709.GP, which incorrectly rejects -# declarations like `int a3[[(sizeof (unsigned char)) >= 0]];'. -# This bug is HP SR number 8606223364. -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking size of long" >&5 -$as_echo_n "checking size of long... " >&6; } -if test "${ac_cv_sizeof_long+set}" = set; then : - $as_echo_n "(cached) " >&6 -else - if ac_fn_c_compute_int "$LINENO" "(long int) (sizeof (long))" "ac_cv_sizeof_long" "$ac_includes_default"; then : - -else - if test "$ac_cv_type_long" = yes; then - { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 -$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} -{ as_fn_set_status 77 -as_fn_error "cannot compute sizeof (long) -See \`config.log' for more details." "$LINENO" 5; }; } - else - ac_cv_sizeof_long=0 - fi -fi - -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_sizeof_long" >&5 -$as_echo "$ac_cv_sizeof_long" >&6; } - - - -cat >>confdefs.h <<_ACEOF -#define SIZEOF_LONG $ac_cv_sizeof_long -_ACEOF - - - -# Checks for Sun Studio compilers -ac_fn_c_check_decl "$LINENO" "__SUNPRO_C" "ac_cv_have_decl___SUNPRO_C" "$ac_includes_default" -if test "x$ac_cv_have_decl___SUNPRO_C" = x""yes; then : - SUNCC="yes" -else - SUNCC="no" -fi - -ac_fn_c_check_decl "$LINENO" "__amd64" "ac_cv_have_decl___amd64" "$ac_includes_default" -if test "x$ac_cv_have_decl___amd64" = x""yes; then : - AMD64_ABI="yes" -else - AMD64_ABI="no" -fi - - -# Default CFLAGS to -O -g rather than just the -g from AC_PROG_CC -# if we're using Sun Studio and neither the user nor a config.site -# has set CFLAGS. -if test $SUNCC = yes && \ - test "$test_CFLAGS" == "" && \ - test "$CFLAGS" = "-g" -then - CFLAGS="-O -g" -fi - -# -# We ignore pixman_major in the version here because the major version should -# always be encoded in the actual library name. Ie., the soname is: -# -# pixman-$(pixman_major).0.minor.micro -# - - - - -LT_VERSION_INFO="18:2:18" - -PIXMAN_VERSION_MAJOR=0 - -PIXMAN_VERSION_MINOR=18 - -PIXMAN_VERSION_MICRO=2 - - - - -# Check for dependencies -#PKG_CHECK_MODULES(DEP, x11) - -if test "x$GCC" = "xyes"; then - - case " $CFLAGS " in - *[\ \ ]-Wall[\ \ ]*) ;; - *) CFLAGS="$CFLAGS -Wall" ;; - esac - - case " $CFLAGS " in - *[\ \ ]-fno-strict-aliasing[\ \ ]*) ;; - *) CFLAGS="$CFLAGS -fno-strict-aliasing" ;; - esac - -fi -# Extract the first word of "perl", so it can be a program name with args. -set dummy perl; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if test "${ac_cv_path_PERL+set}" = set; then : - $as_echo_n "(cached) " >&6 -else - case $PERL in - [\\/]* | ?:[\\/]*) - ac_cv_path_PERL="$PERL" # Let the user override the test with a path. - ;; - *) - as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_path_PERL="$as_dir/$ac_word$ac_exec_ext" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - - test -z "$ac_cv_path_PERL" && ac_cv_path_PERL="no" - ;; -esac -fi -PERL=$ac_cv_path_PERL -if test -n "$PERL"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $PERL" >&5 -$as_echo "$PERL" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - -if test "x$PERL" = xno; then - as_fn_error "Perl is required to build pixman." "$LINENO" 5 -fi - - - -have_gcc4=no -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for -fvisibility" >&5 -$as_echo_n "checking for -fvisibility... " >&6; } -cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - -#if defined(__GNUC__) && (__GNUC__ >= 4) -#else -error Need GCC 4.0 for visibility -#endif -int main () { return 0; } - -_ACEOF -if ac_fn_c_try_compile "$LINENO"; then : - have_gcc4=yes -fi -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext - -if test "x$have_gcc4" = "xyes"; then - CFLAGS="$CFLAGS -fvisibility=hidden" -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $have_gcc4" >&5 -$as_echo "$have_gcc4" >&6; } - -have_sunstudio8=no -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for -xldscope (Sun compilers)" >&5 -$as_echo_n "checking for -xldscope (Sun compilers)... " >&6; } -cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - -#if defined(__SUNPRO_C) && (__SUNPRO_C >= 0x550) -#else -error Need Sun Studio 8 for visibility -#endif -int main () { return 0; } - -_ACEOF -if ac_fn_c_try_compile "$LINENO"; then : - have_sunstudio8=yes -fi -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext - -if test "x$have_sunstudio8" = "xyes"; then - CFLAGS="$CFLAGS -xldscope=hidden" -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $have_sunstudio8" >&5 -$as_echo "$have_sunstudio8" >&6; } - - -if test "x$MMX_CFLAGS" = "x" ; then - if test "x$SUNCC" = "xyes"; then - # Sun Studio doesn't have an -xarch=mmx flag, so we have to use sse - # but if we're building 64-bit, mmx & sse support is on by default and - # -xarch=sse throws an error instead - if test "$AMD64_ABI" = "no" ; then - MMX_CFLAGS="-xarch=sse" - fi - else - MMX_CFLAGS="-mmmx -Winline" - fi -fi - -have_mmx_intrinsics=no -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to use MMX intrinsics" >&5 -$as_echo_n "checking whether to use MMX intrinsics... " >&6; } -xserver_save_CFLAGS=$CFLAGS -CFLAGS="$MMX_CFLAGS $CFLAGS" -cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - -#if defined(__GNUC__) && (__GNUC__ < 3 || (__GNUC__ == 3 && __GNUC_MINOR__ < 4)) -error "Need GCC >= 3.4 for MMX intrinsics" -#endif -#include <mmintrin.h> -int main () { - __m64 v = _mm_cvtsi32_si64 (1); - return _mm_cvtsi64_si32 (v); -} -_ACEOF -if ac_fn_c_try_compile "$LINENO"; then : - have_mmx_intrinsics=yes -fi -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext -CFLAGS=$xserver_save_CFLAGS - -# Check whether --enable-mmx was given. -if test "${enable_mmx+set}" = set; then : - enableval=$enable_mmx; enable_mmx=$enableval -else - enable_mmx=auto -fi - - -if test $enable_mmx = no ; then - have_mmx_intrinsics=disabled -fi - -if test $have_mmx_intrinsics = yes ; then - -$as_echo "#define USE_MMX 1" >>confdefs.h - -else - MMX_CFLAGS= -fi - -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $have_mmx_intrinsics" >&5 -$as_echo "$have_mmx_intrinsics" >&6; } -if test $enable_mmx = yes && test $have_mmx_intrinsics = no ; then - as_fn_error "MMX intrinsics not detected" "$LINENO" 5 -fi - - if test $have_mmx_intrinsics = yes; then - USE_MMX_TRUE= - USE_MMX_FALSE='#' -else - USE_MMX_TRUE='#' - USE_MMX_FALSE= -fi - - - -if test "x$SSE2_CFLAGS" = "x" ; then - if test "x$SUNCC" = "xyes"; then - # SSE2 is enabled by default in the Sun Studio 64-bit environment - if test "$AMD64_ABI" = "no" ; then - SSE2_CFLAGS="-xarch=sse2" - fi - else - SSE2_CFLAGS="-mmmx -msse2 -Winline" - fi -fi - -have_sse2_intrinsics=no -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to use SSE2 intrinsics" >&5 -$as_echo_n "checking whether to use SSE2 intrinsics... " >&6; } -xserver_save_CFLAGS=$CFLAGS -CFLAGS="$SSE2_CFLAGS $CFLAGS" - -cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - -#if defined(__GNUC__) && (__GNUC__ < 4 || (__GNUC__ == 4 && __GNUC_MINOR__ < 2)) -# if !defined(__amd64__) && !defined(__x86_64__) -# error "Need GCC >= 4.2 for SSE2 intrinsics on x86" -# endif -#endif -#include <mmintrin.h> -#include <xmmintrin.h> -#include <emmintrin.h> -int main () { - __m128i a = _mm_set1_epi32 (0), b = _mm_set1_epi32 (0), c; - c = _mm_xor_si128 (a, b); - return 0; -} -_ACEOF -if ac_fn_c_try_compile "$LINENO"; then : - have_sse2_intrinsics=yes -fi -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext -CFLAGS=$xserver_save_CFLAGS - -# Check whether --enable-sse2 was given. -if test "${enable_sse2+set}" = set; then : - enableval=$enable_sse2; enable_sse2=$enableval -else - enable_sse2=auto -fi - - -if test $enable_sse2 = no ; then - have_sse2_intrinsics=disabled -fi - -if test $have_sse2_intrinsics = yes ; then - -$as_echo "#define USE_SSE2 1" >>confdefs.h - -fi - -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $have_sse2_intrinsics" >&5 -$as_echo "$have_sse2_intrinsics" >&6; } -if test $enable_sse2 = yes && test $have_sse2_intrinsics = no ; then - as_fn_error "SSE2 intrinsics not detected" "$LINENO" 5 -fi - - if test $have_sse2_intrinsics = yes; then - USE_SSE2_TRUE= - USE_SSE2_FALSE='#' -else - USE_SSE2_TRUE='#' - USE_SSE2_FALSE= -fi - - -case $host_os in - solaris*) - # When building 32-bit binaries, apply a mapfile to ensure that the - # binaries aren't flagged as only able to run on MMX+SSE capable CPUs - # since they check at runtime before using those instructions. - # Not all linkers grok the mapfile format so we check for that first. - if test "$AMD64_ABI" = "no" ; then - use_hwcap_mapfile=no - { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to use a hardware capability map file" >&5 -$as_echo_n "checking whether to use a hardware capability map file... " >&6; } - hwcap_save_LDFLAGS="$LDFLAGS" - HWCAP_LDFLAGS='-Wl,-M,$(srcdir)/solaris-hwcap.mapfile' - LDFLAGS="$LDFLAGS -Wl,-M,pixman/solaris-hwcap.mapfile" - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -int main() { return 0; } -_ACEOF -if ac_fn_c_try_link "$LINENO"; then : - use_hwcap_mapfile=yes -else - HWCAP_LDFLAGS="" -fi -rm -f core conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext - LDFLAGS="$hwcap_save_LDFLAGS" - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $use_hwcap_mapfile" >&5 -$as_echo "$use_hwcap_mapfile" >&6; } - fi - if test "x$MMX_LDFLAGS" = "x" ; then - MMX_LDFLAGS="$HWCAP_LDFLAGS" - fi - if test "x$SSE2_LDFLAGS" = "x" ; then - SSE2_LDFLAGS="$HWCAP_LDFLAGS" - fi - ;; -esac - - - - - - -if test -n "`$CC -v 2>&1 | grep version | grep Apple`"; then - VMX_CFLAGS="-faltivec" -else - VMX_CFLAGS="-maltivec -mabi=altivec" -fi - -have_vmx_intrinsics=no -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to use VMX/Altivec intrinsics" >&5 -$as_echo_n "checking whether to use VMX/Altivec intrinsics... " >&6; } -xserver_save_CFLAGS=$CFLAGS -CFLAGS="$VMX_CFLAGS $CFLAGS" -cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - -#if defined(__GNUC__) && (__GNUC__ < 3 || (__GNUC__ == 3 && __GNUC_MINOR__ < 4)) -error "Need GCC >= 3.4 for sane altivec support" -#endif -#include <altivec.h> -int main () { - vector unsigned int v = vec_splat_u32 (1); - v = vec_sub (v, v); - return 0; -} -_ACEOF -if ac_fn_c_try_compile "$LINENO"; then : - have_vmx_intrinsics=yes -fi -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext -CFLAGS=$xserver_save_CFLAGS - -# Check whether --enable-vmx was given. -if test "${enable_vmx+set}" = set; then : - enableval=$enable_vmx; enable_vmx=$enableval -else - enable_vmx=auto -fi - - -if test $enable_vmx = no ; then - have_vmx_intrinsics=disabled -fi - -if test $have_vmx_intrinsics = yes ; then - -$as_echo "#define USE_VMX 1" >>confdefs.h - -else - VMX_CFLAGS= -fi - -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $have_vmx_intrinsics" >&5 -$as_echo "$have_vmx_intrinsics" >&6; } -if test $enable_vmx = yes && test $have_vmx_intrinsics = no ; then - as_fn_error "VMX intrinsics not detected" "$LINENO" 5 -fi - - - - if test $have_vmx_intrinsics = yes; then - USE_VMX_TRUE= - USE_VMX_FALSE='#' -else - USE_VMX_TRUE='#' - USE_VMX_FALSE= -fi - - -have_arm_simd=no -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to use ARM SIMD assembler" >&5 -$as_echo_n "checking whether to use ARM SIMD assembler... " >&6; } -xserver_save_CFLAGS=$CFLAGS -CFLAGS="-x assembler-with-cpp $CFLAGS" -cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - -.text -.arch armv6 -.object_arch armv4 -.arm -.altmacro -#ifndef __ARM_EABI__ -#error EABI is required (to be sure that calling conventions are compatible) -#endif -pld [r0] -uqadd8 r0, r0, r0 -_ACEOF -if ac_fn_c_try_compile "$LINENO"; then : - have_arm_simd=yes -fi -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext -CFLAGS=$xserver_save_CFLAGS - -# Check whether --enable-arm-simd was given. -if test "${enable_arm_simd+set}" = set; then : - enableval=$enable_arm_simd; enable_arm_simd=$enableval -else - enable_arm_simd=auto -fi - - -if test $enable_arm_simd = no ; then - have_arm_simd=disabled -fi - -if test $have_arm_simd = yes ; then - -$as_echo "#define USE_ARM_SIMD 1" >>confdefs.h - -fi - - if test $have_arm_simd = yes; then - USE_ARM_SIMD_TRUE= - USE_ARM_SIMD_FALSE='#' -else - USE_ARM_SIMD_TRUE='#' - USE_ARM_SIMD_FALSE= -fi - - -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $have_arm_simd" >&5 -$as_echo "$have_arm_simd" >&6; } -if test $enable_arm_simd = yes && test $have_arm_simd = no ; then - as_fn_error "ARM SIMD intrinsics not detected" "$LINENO" 5 -fi - -have_arm_neon=no -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to use ARM NEON assembler" >&5 -$as_echo_n "checking whether to use ARM NEON assembler... " >&6; } -xserver_save_CFLAGS=$CFLAGS -CFLAGS="-x assembler-with-cpp $CFLAGS" -cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - -.text -.fpu neon -.arch armv7a -.object_arch armv4 -.eabi_attribute 10, 0 -.arm -.altmacro -#ifndef __ARM_EABI__ -#error EABI is required (to be sure that calling conventions are compatible) -#endif -pld [r0] -vmovn.u16 d0, q0 -_ACEOF -if ac_fn_c_try_compile "$LINENO"; then : - have_arm_neon=yes -fi -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext -CFLAGS=$xserver_save_CFLAGS - -# Check whether --enable-arm-neon was given. -if test "${enable_arm_neon+set}" = set; then : - enableval=$enable_arm_neon; enable_arm_neon=$enableval -else - enable_arm_neon=auto -fi - - -if test $enable_arm_neon = no ; then - have_arm_neon=disabled -fi - -if test $have_arm_neon = yes ; then - -$as_echo "#define USE_ARM_NEON 1" >>confdefs.h - -fi - - if test $have_arm_neon = yes; then - USE_ARM_NEON_TRUE= - USE_ARM_NEON_FALSE='#' -else - USE_ARM_NEON_TRUE='#' - USE_ARM_NEON_FALSE= -fi - - -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $have_arm_neon" >&5 -$as_echo "$have_arm_neon" >&6; } -if test $enable_arm_neon = yes && test $have_arm_neon = no ; then - as_fn_error "ARM NEON intrinsics not detected" "$LINENO" 5 -fi - - -have_gcc_inline_asm=no -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to use GNU-style inline assembler" >&5 -$as_echo_n "checking whether to use GNU-style inline assembler... " >&6; } -cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - -int main () { - /* Most modern architectures have a NOP instruction, so this is a fairly generic test. */ - asm volatile ( "\tnop\n" : : : "cc", "memory" ); - return 0; -} -_ACEOF -if ac_fn_c_try_compile "$LINENO"; then : - have_gcc_inline_asm=yes -fi -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext - -# Check whether --enable-gcc-inline-asm was given. -if test "${enable_gcc_inline_asm+set}" = set; then : - enableval=$enable_gcc_inline_asm; enable_gcc_inline_asm=$enableval -else - enable_gcc_inline_asm=auto -fi - - -if test $enable_gcc_inline_asm = no ; then - have_gcc_inline_asm=disabled -fi - -if test $have_gcc_inline_asm = yes ; then - -$as_echo "#define USE_GCC_INLINE_ASM 1" >>confdefs.h - -fi - -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $have_gcc_inline_asm" >&5 -$as_echo "$have_gcc_inline_asm" >&6; } -if test $enable_gcc_inline_asm = yes && test $have_gcc_inline_asm = no ; then - as_fn_error "GNU-style inline assembler not detected" "$LINENO" 5 -fi - - if test $have_gcc_inline_asm = yes; then - USE_GCC_INLINE_ASM_TRUE= - USE_GCC_INLINE_ASM_FALSE='#' -else - USE_GCC_INLINE_ASM_TRUE='#' - USE_GCC_INLINE_ASM_FALSE= -fi - - - -# Check whether --enable-timers was given. -if test "${enable_timers+set}" = set; then : - enableval=$enable_timers; enable_timers=$enableval -else - enable_timers=no -fi - - -if test $enable_timers = yes ; then - -$as_echo "#define PIXMAN_TIMERS 1" >>confdefs.h - -fi - - - -# Check whether --enable-gtk was given. -if test "${enable_gtk+set}" = set; then : - enableval=$enable_gtk; enable_gtk=$enableval -else - enable_gtk=auto -fi - - - - -if test "x$ac_cv_env_PKG_CONFIG_set" != "xset"; then - if test -n "$ac_tool_prefix"; then - # Extract the first word of "${ac_tool_prefix}pkg-config", so it can be a program name with args. -set dummy ${ac_tool_prefix}pkg-config; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if test "${ac_cv_path_PKG_CONFIG+set}" = set; then : - $as_echo_n "(cached) " >&6 -else - case $PKG_CONFIG in - [\\/]* | ?:[\\/]*) - ac_cv_path_PKG_CONFIG="$PKG_CONFIG" # Let the user override the test with a path. - ;; - *) - as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_path_PKG_CONFIG="$as_dir/$ac_word$ac_exec_ext" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - - ;; -esac -fi -PKG_CONFIG=$ac_cv_path_PKG_CONFIG -if test -n "$PKG_CONFIG"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $PKG_CONFIG" >&5 -$as_echo "$PKG_CONFIG" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - -fi -if test -z "$ac_cv_path_PKG_CONFIG"; then - ac_pt_PKG_CONFIG=$PKG_CONFIG - # Extract the first word of "pkg-config", so it can be a program name with args. -set dummy pkg-config; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if test "${ac_cv_path_ac_pt_PKG_CONFIG+set}" = set; then : - $as_echo_n "(cached) " >&6 -else - case $ac_pt_PKG_CONFIG in - [\\/]* | ?:[\\/]*) - ac_cv_path_ac_pt_PKG_CONFIG="$ac_pt_PKG_CONFIG" # Let the user override the test with a path. - ;; - *) - as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_path_ac_pt_PKG_CONFIG="$as_dir/$ac_word$ac_exec_ext" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - - ;; -esac -fi -ac_pt_PKG_CONFIG=$ac_cv_path_ac_pt_PKG_CONFIG -if test -n "$ac_pt_PKG_CONFIG"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_pt_PKG_CONFIG" >&5 -$as_echo "$ac_pt_PKG_CONFIG" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - if test "x$ac_pt_PKG_CONFIG" = x; then - PKG_CONFIG="" - else - case $cross_compiling:$ac_tool_warned in -yes:) -{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 -$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} -ac_tool_warned=yes ;; -esac - PKG_CONFIG=$ac_pt_PKG_CONFIG - fi -else - PKG_CONFIG="$ac_cv_path_PKG_CONFIG" -fi - -fi -if test -n "$PKG_CONFIG"; then - _pkg_min_version=0.9.0 - { $as_echo "$as_me:${as_lineno-$LINENO}: checking pkg-config is at least version $_pkg_min_version" >&5 -$as_echo_n "checking pkg-config is at least version $_pkg_min_version... " >&6; } - if $PKG_CONFIG --atleast-pkgconfig-version $_pkg_min_version; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 -$as_echo "yes" >&6; } - else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } - PKG_CONFIG="" - fi - -fi -if test $enable_gtk = auto ; then - if test -n "$PKG_CONFIG" && \ - { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"gtk+-2.0\""; } >&5 - ($PKG_CONFIG --exists --print-errors "gtk+-2.0") 2>&5 - ac_status=$? - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; }; then - enable_gtk=yes -else - enable_gtk=no -fi -fi -if test $enable_gtk = yes ; then - -pkg_failed=no -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for GTK" >&5 -$as_echo_n "checking for GTK... " >&6; } - -if test -n "$GTK_CFLAGS"; then - pkg_cv_GTK_CFLAGS="$GTK_CFLAGS" - elif test -n "$PKG_CONFIG"; then - if test -n "$PKG_CONFIG" && \ - { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"gtk+-2.0\""; } >&5 - ($PKG_CONFIG --exists --print-errors "gtk+-2.0") 2>&5 - ac_status=$? - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; }; then - pkg_cv_GTK_CFLAGS=`$PKG_CONFIG --cflags "gtk+-2.0" 2>/dev/null` -else - pkg_failed=yes -fi - else - pkg_failed=untried -fi -if test -n "$GTK_LIBS"; then - pkg_cv_GTK_LIBS="$GTK_LIBS" - elif test -n "$PKG_CONFIG"; then - if test -n "$PKG_CONFIG" && \ - { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"gtk+-2.0\""; } >&5 - ($PKG_CONFIG --exists --print-errors "gtk+-2.0") 2>&5 - ac_status=$? - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; }; then - pkg_cv_GTK_LIBS=`$PKG_CONFIG --libs "gtk+-2.0" 2>/dev/null` -else - pkg_failed=yes -fi - else - pkg_failed=untried -fi - - - -if test $pkg_failed = yes; then - -if $PKG_CONFIG --atleast-pkgconfig-version 0.20; then - _pkg_short_errors_supported=yes -else - _pkg_short_errors_supported=no -fi - if test $_pkg_short_errors_supported = yes; then - GTK_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors "gtk+-2.0" 2>&1` - else - GTK_PKG_ERRORS=`$PKG_CONFIG --print-errors "gtk+-2.0" 2>&1` - fi - # Put the nasty error message in config.log where it belongs - echo "$GTK_PKG_ERRORS" >&5 - - as_fn_error "Package requirements (gtk+-2.0) were not met: - -$GTK_PKG_ERRORS - -Consider adjusting the PKG_CONFIG_PATH environment variable if you -installed software in a non-standard prefix. - -Alternatively, you may set the environment variables GTK_CFLAGS -and GTK_LIBS to avoid the need to call pkg-config. -See the pkg-config man page for more details. -" "$LINENO" 5 -elif test $pkg_failed = untried; then - { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 -$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} -as_fn_error "The pkg-config script could not be found or is too old. Make sure it -is in your PATH or set the PKG_CONFIG environment variable to the full -path to pkg-config. - -Alternatively, you may set the environment variables GTK_CFLAGS -and GTK_LIBS to avoid the need to call pkg-config. -See the pkg-config man page for more details. - -To get pkg-config, see <http://pkg-config.freedesktop.org/>. -See \`config.log' for more details." "$LINENO" 5; } -else - GTK_CFLAGS=$pkg_cv_GTK_CFLAGS - GTK_LIBS=$pkg_cv_GTK_LIBS - { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 -$as_echo "yes" >&6; } - : -fi -fi - - if test "x$enable_gtk" = xyes; then - HAVE_GTK_TRUE= - HAVE_GTK_FALSE='#' -else - HAVE_GTK_TRUE='#' - HAVE_GTK_FALSE= -fi - - - - - - - - -ac_fn_c_check_func "$LINENO" "posix_memalign" "ac_cv_func_posix_memalign" -if test "x$ac_cv_func_posix_memalign" = x""yes; then : - have_posix_memalign=yes -else - have_posix_memalign=no -fi - -if test x$have_posix_memalign = xyes; then - -$as_echo "#define HAVE_POSIX_MEMALIGN 1" >>confdefs.h - -fi - - -support_for__thread=no - -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for __thread" >&5 -$as_echo_n "checking for __thread... " >&6; } -cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - -#ifdef __MINGW32__ -#error MinGW has broken __thread support -#endif -__thread int x ; -int main () { return 0; } - -_ACEOF -if ac_fn_c_try_compile "$LINENO"; then : - support_for__thread=yes -fi -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext - -if test $support_for__thread = yes; then - -$as_echo "#define TOOLCHAIN_SUPPORTS__THREAD /**/" >>confdefs.h - -fi - -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $support_for__thread" >&5 -$as_echo "$support_for__thread" >&6; } - - -if test $support_for__thread = no; then - -support_for_pthread_setspecific=no - -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for pthread_setspecific" >&5 -$as_echo_n "checking for pthread_setspecific... " >&6; } - -save_LDFLAGS=$LDFLAGS - -LDFLAGS="-pthread" - -cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - -#include <pthread.h> - -#include <stdlib.h> -#include <pthread.h> - -static pthread_once_t once_control = PTHREAD_ONCE_INIT; -static pthread_key_t key; - -static void -make_key (void) -{ - pthread_key_create (&key, NULL); -} - -int -main () -{ - void *value = NULL; - - if (pthread_once (&once_control, make_key) != 0) - { - value = NULL; - } - else - { - value = pthread_getspecific (key); - if (!value) - { - value = malloc (100); - pthread_setspecific (key, value); - } - } -} - -_ACEOF -if ac_fn_c_try_link "$LINENO"; then : - support_for_pthread_setspecific=yes -fi -rm -f core conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext; - -LDFLAGS=$save_LDFLAGS - -if test $support_for_pthread_setspecific = yes; then - PTHREAD_LDFLAGS="-pthread" - -$as_echo "#define HAVE_PTHREAD_SETSPECIFIC /**/" >>confdefs.h - -fi - -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $support_for_pthread_setspecific" >&5 -$as_echo "$support_for_pthread_setspecific" >&6; }; - -fi - - - - - -ac_config_files="$ac_config_files pixman-1.pc pixman-1-uninstalled.pc Makefile pixman/Makefile pixman/pixman-version.h test/Makefile" - -cat >confcache <<\_ACEOF -# This file is a shell script that caches the results of configure -# tests run on this system so they can be shared between configure -# scripts and configure runs, see configure's option --config-cache. -# It is not useful on other systems. If it contains results you don't -# want to keep, you may remove or edit it. -# -# config.status only pays attention to the cache file if you give it -# the --recheck option to rerun configure. -# -# `ac_cv_env_foo' variables (set or unset) will be overridden when -# loading this file, other *unset* `ac_cv_foo' will be assigned the -# following values. - -_ACEOF - -# The following way of writing the cache mishandles newlines in values, -# but we know of no workaround that is simple, portable, and efficient. -# So, we kill variables containing newlines. -# Ultrix sh set writes to stderr and can't be redirected directly, -# and sets the high bit in the cache file unless we assign to the vars. -( - for ac_var in `(set) 2>&1 | sed -n 's/^\([a-zA-Z_][a-zA-Z0-9_]*\)=.*/\1/p'`; do - eval ac_val=\$$ac_var - case $ac_val in #( - *${as_nl}*) - case $ac_var in #( - *_cv_*) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: cache variable $ac_var contains a newline" >&5 -$as_echo "$as_me: WARNING: cache variable $ac_var contains a newline" >&2;} ;; - esac - case $ac_var in #( - _ | IFS | as_nl) ;; #( - BASH_ARGV | BASH_SOURCE) eval $ac_var= ;; #( - *) { eval $ac_var=; unset $ac_var;} ;; - esac ;; - esac - done - - (set) 2>&1 | - case $as_nl`(ac_space=' '; set) 2>&1` in #( - *${as_nl}ac_space=\ *) - # `set' does not quote correctly, so add quotes: double-quote - # substitution turns \\\\ into \\, and sed turns \\ into \. - sed -n \ - "s/'/'\\\\''/g; - s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\\2'/p" - ;; #( - *) - # `set' quotes correctly as required by POSIX, so do not add quotes. - sed -n "/^[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*=/p" - ;; - esac | - sort -) | - sed ' - /^ac_cv_env_/b end - t clear - :clear - s/^\([^=]*\)=\(.*[{}].*\)$/test "${\1+set}" = set || &/ - t end - s/^\([^=]*\)=\(.*\)$/\1=${\1=\2}/ - :end' >>confcache -if diff "$cache_file" confcache >/dev/null 2>&1; then :; else - if test -w "$cache_file"; then - test "x$cache_file" != "x/dev/null" && - { $as_echo "$as_me:${as_lineno-$LINENO}: updating cache $cache_file" >&5 -$as_echo "$as_me: updating cache $cache_file" >&6;} - cat confcache >$cache_file - else - { $as_echo "$as_me:${as_lineno-$LINENO}: not updating unwritable cache $cache_file" >&5 -$as_echo "$as_me: not updating unwritable cache $cache_file" >&6;} - fi -fi -rm -f confcache - -test "x$prefix" = xNONE && prefix=$ac_default_prefix -# Let make expand exec_prefix. -test "x$exec_prefix" = xNONE && exec_prefix='${prefix}' - -DEFS=-DHAVE_CONFIG_H - -ac_libobjs= -ac_ltlibobjs= -for ac_i in : $LIBOBJS; do test "x$ac_i" = x: && continue - # 1. Remove the extension, and $U if already installed. - ac_script='s/\$U\././;s/\.o$//;s/\.obj$//' - ac_i=`$as_echo "$ac_i" | sed "$ac_script"` - # 2. Prepend LIBOBJDIR. When used with automake>=1.10 LIBOBJDIR - # will be set to the directory where LIBOBJS objects are built. - as_fn_append ac_libobjs " \${LIBOBJDIR}$ac_i\$U.$ac_objext" - as_fn_append ac_ltlibobjs " \${LIBOBJDIR}$ac_i"'$U.lo' -done -LIBOBJS=$ac_libobjs - -LTLIBOBJS=$ac_ltlibobjs - - - if test -n "$EXEEXT"; then - am__EXEEXT_TRUE= - am__EXEEXT_FALSE='#' -else - am__EXEEXT_TRUE='#' - am__EXEEXT_FALSE= -fi - -if test -z "${AMDEP_TRUE}" && test -z "${AMDEP_FALSE}"; then - as_fn_error "conditional \"AMDEP\" was never defined. -Usually this means the macro was only invoked conditionally." "$LINENO" 5 -fi -if test -z "${am__fastdepCC_TRUE}" && test -z "${am__fastdepCC_FALSE}"; then - as_fn_error "conditional \"am__fastdepCC\" was never defined. -Usually this means the macro was only invoked conditionally." "$LINENO" 5 -fi -if test -z "${am__fastdepCCAS_TRUE}" && test -z "${am__fastdepCCAS_FALSE}"; then - as_fn_error "conditional \"am__fastdepCCAS\" was never defined. -Usually this means the macro was only invoked conditionally." "$LINENO" 5 -fi - -if test -z "${USE_MMX_TRUE}" && test -z "${USE_MMX_FALSE}"; then - as_fn_error "conditional \"USE_MMX\" was never defined. -Usually this means the macro was only invoked conditionally." "$LINENO" 5 -fi -if test -z "${USE_SSE2_TRUE}" && test -z "${USE_SSE2_FALSE}"; then - as_fn_error "conditional \"USE_SSE2\" was never defined. -Usually this means the macro was only invoked conditionally." "$LINENO" 5 -fi -if test -z "${USE_VMX_TRUE}" && test -z "${USE_VMX_FALSE}"; then - as_fn_error "conditional \"USE_VMX\" was never defined. -Usually this means the macro was only invoked conditionally." "$LINENO" 5 -fi -if test -z "${USE_ARM_SIMD_TRUE}" && test -z "${USE_ARM_SIMD_FALSE}"; then - as_fn_error "conditional \"USE_ARM_SIMD\" was never defined. -Usually this means the macro was only invoked conditionally." "$LINENO" 5 -fi -if test -z "${USE_ARM_NEON_TRUE}" && test -z "${USE_ARM_NEON_FALSE}"; then - as_fn_error "conditional \"USE_ARM_NEON\" was never defined. -Usually this means the macro was only invoked conditionally." "$LINENO" 5 -fi -if test -z "${USE_GCC_INLINE_ASM_TRUE}" && test -z "${USE_GCC_INLINE_ASM_FALSE}"; then - as_fn_error "conditional \"USE_GCC_INLINE_ASM\" was never defined. -Usually this means the macro was only invoked conditionally." "$LINENO" 5 -fi -if test -z "${HAVE_GTK_TRUE}" && test -z "${HAVE_GTK_FALSE}"; then - as_fn_error "conditional \"HAVE_GTK\" was never defined. -Usually this means the macro was only invoked conditionally." "$LINENO" 5 -fi - -: ${CONFIG_STATUS=./config.status} -ac_write_fail=0 -ac_clean_files_save=$ac_clean_files -ac_clean_files="$ac_clean_files $CONFIG_STATUS" -{ $as_echo "$as_me:${as_lineno-$LINENO}: creating $CONFIG_STATUS" >&5 -$as_echo "$as_me: creating $CONFIG_STATUS" >&6;} -as_write_fail=0 -cat >$CONFIG_STATUS <<_ASEOF || as_write_fail=1 -#! $SHELL -# Generated by $as_me. -# Run this file to recreate the current configuration. -# Compiler output produced by configure, useful for debugging -# configure, is in config.log if it exists. - -debug=false -ac_cs_recheck=false -ac_cs_silent=false - -SHELL=\${CONFIG_SHELL-$SHELL} -export SHELL -_ASEOF -cat >>$CONFIG_STATUS <<\_ASEOF || as_write_fail=1 -## -------------------- ## -## M4sh Initialization. ## -## -------------------- ## - -# Be more Bourne compatible -DUALCASE=1; export DUALCASE # for MKS sh -if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then : - emulate sh - NULLCMD=: - # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which - # is contrary to our usage. Disable this feature. - alias -g '${1+"$@"}'='"$@"' - setopt NO_GLOB_SUBST -else - case `(set -o) 2>/dev/null` in #( - *posix*) : - set -o posix ;; #( - *) : - ;; -esac -fi - - -as_nl=' -' -export as_nl -# Printing a long string crashes Solaris 7 /usr/bin/printf. -as_echo='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\' -as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo -as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo$as_echo -# Prefer a ksh shell builtin over an external printf program on Solaris, -# but without wasting forks for bash or zsh. -if test -z "$BASH_VERSION$ZSH_VERSION" \ - && (test "X`print -r -- $as_echo`" = "X$as_echo") 2>/dev/null; then - as_echo='print -r --' - as_echo_n='print -rn --' -elif (test "X`printf %s $as_echo`" = "X$as_echo") 2>/dev/null; then - as_echo='printf %s\n' - as_echo_n='printf %s' -else - if test "X`(/usr/ucb/echo -n -n $as_echo) 2>/dev/null`" = "X-n $as_echo"; then - as_echo_body='eval /usr/ucb/echo -n "$1$as_nl"' - as_echo_n='/usr/ucb/echo -n' - else - as_echo_body='eval expr "X$1" : "X\\(.*\\)"' - as_echo_n_body='eval - arg=$1; - case $arg in #( - *"$as_nl"*) - expr "X$arg" : "X\\(.*\\)$as_nl"; - arg=`expr "X$arg" : ".*$as_nl\\(.*\\)"`;; - esac; - expr "X$arg" : "X\\(.*\\)" | tr -d "$as_nl" - ' - export as_echo_n_body - as_echo_n='sh -c $as_echo_n_body as_echo' - fi - export as_echo_body - as_echo='sh -c $as_echo_body as_echo' -fi - -# The user is always right. -if test "${PATH_SEPARATOR+set}" != set; then - PATH_SEPARATOR=: - (PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 && { - (PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 || - PATH_SEPARATOR=';' - } -fi - - -# IFS -# We need space, tab and new line, in precisely that order. Quoting is -# there to prevent editors from complaining about space-tab. -# (If _AS_PATH_WALK were called with IFS unset, it would disable word -# splitting by setting IFS to empty value.) -IFS=" "" $as_nl" - -# Find who we are. Look in the path if we contain no directory separator. -case $0 in #(( - *[\\/]* ) as_myself=$0 ;; - *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break - done -IFS=$as_save_IFS - - ;; -esac -# We did not find ourselves, most probably we were run as `sh COMMAND' -# in which case we are not to be found in the path. -if test "x$as_myself" = x; then - as_myself=$0 -fi -if test ! -f "$as_myself"; then - $as_echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2 - exit 1 -fi - -# Unset variables that we do not need and which cause bugs (e.g. in -# pre-3.0 UWIN ksh). But do not cause bugs in bash 2.01; the "|| exit 1" -# suppresses any "Segmentation fault" message there. '((' could -# trigger a bug in pdksh 5.2.14. -for as_var in BASH_ENV ENV MAIL MAILPATH -do eval test x\${$as_var+set} = xset \ - && ( (unset $as_var) || exit 1) >/dev/null 2>&1 && unset $as_var || : -done -PS1='$ ' -PS2='> ' -PS4='+ ' - -# NLS nuisances. -LC_ALL=C -export LC_ALL -LANGUAGE=C -export LANGUAGE - -# CDPATH. -(unset CDPATH) >/dev/null 2>&1 && unset CDPATH - - -# as_fn_error ERROR [LINENO LOG_FD] -# --------------------------------- -# Output "`basename $0`: error: ERROR" to stderr. If LINENO and LOG_FD are -# provided, also output the error to LOG_FD, referencing LINENO. Then exit the -# script with status $?, using 1 if that was 0. -as_fn_error () -{ - as_status=$?; test $as_status -eq 0 && as_status=1 - if test "$3"; then - as_lineno=${as_lineno-"$2"} as_lineno_stack=as_lineno_stack=$as_lineno_stack - $as_echo "$as_me:${as_lineno-$LINENO}: error: $1" >&$3 - fi - $as_echo "$as_me: error: $1" >&2 - as_fn_exit $as_status -} # as_fn_error - - -# as_fn_set_status STATUS -# ----------------------- -# Set $? to STATUS, without forking. -as_fn_set_status () -{ - return $1 -} # as_fn_set_status - -# as_fn_exit STATUS -# ----------------- -# Exit the shell with STATUS, even in a "trap 0" or "set -e" context. -as_fn_exit () -{ - set +e - as_fn_set_status $1 - exit $1 -} # as_fn_exit - -# as_fn_unset VAR -# --------------- -# Portably unset VAR. -as_fn_unset () -{ - { eval $1=; unset $1;} -} -as_unset=as_fn_unset -# as_fn_append VAR VALUE -# ---------------------- -# Append the text in VALUE to the end of the definition contained in VAR. Take -# advantage of any shell optimizations that allow amortized linear growth over -# repeated appends, instead of the typical quadratic growth present in naive -# implementations. -if (eval "as_var=1; as_var+=2; test x\$as_var = x12") 2>/dev/null; then : - eval 'as_fn_append () - { - eval $1+=\$2 - }' -else - as_fn_append () - { - eval $1=\$$1\$2 - } -fi # as_fn_append - -# as_fn_arith ARG... -# ------------------ -# Perform arithmetic evaluation on the ARGs, and store the result in the -# global $as_val. Take advantage of shells that can avoid forks. The arguments -# must be portable across $(()) and expr. -if (eval "test \$(( 1 + 1 )) = 2") 2>/dev/null; then : - eval 'as_fn_arith () - { - as_val=$(( $* )) - }' -else - as_fn_arith () - { - as_val=`expr "$@" || test $? -eq 1` - } -fi # as_fn_arith - - -if expr a : '\(a\)' >/dev/null 2>&1 && - test "X`expr 00001 : '.*\(...\)'`" = X001; then - as_expr=expr -else - as_expr=false -fi - -if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then - as_basename=basename -else - as_basename=false -fi - -if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then - as_dirname=dirname -else - as_dirname=false -fi - -as_me=`$as_basename -- "$0" || -$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \ - X"$0" : 'X\(//\)$' \| \ - X"$0" : 'X\(/\)' \| . 2>/dev/null || -$as_echo X/"$0" | - sed '/^.*\/\([^/][^/]*\)\/*$/{ - s//\1/ - q - } - /^X\/\(\/\/\)$/{ - s//\1/ - q - } - /^X\/\(\/\).*/{ - s//\1/ - q - } - s/.*/./; q'` - -# Avoid depending upon Character Ranges. -as_cr_letters='abcdefghijklmnopqrstuvwxyz' -as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ' -as_cr_Letters=$as_cr_letters$as_cr_LETTERS -as_cr_digits='0123456789' -as_cr_alnum=$as_cr_Letters$as_cr_digits - -ECHO_C= ECHO_N= ECHO_T= -case `echo -n x` in #((((( --n*) - case `echo 'xy\c'` in - *c*) ECHO_T=' ';; # ECHO_T is single tab character. - xy) ECHO_C='\c';; - *) echo `echo ksh88 bug on AIX 6.1` > /dev/null - ECHO_T=' ';; - esac;; -*) - ECHO_N='-n';; -esac - -rm -f conf$$ conf$$.exe conf$$.file -if test -d conf$$.dir; then - rm -f conf$$.dir/conf$$.file -else - rm -f conf$$.dir - mkdir conf$$.dir 2>/dev/null -fi -if (echo >conf$$.file) 2>/dev/null; then - if ln -s conf$$.file conf$$ 2>/dev/null; then - as_ln_s='ln -s' - # ... but there are two gotchas: - # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail. - # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable. - # In both cases, we have to default to `cp -p'. - ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe || - as_ln_s='cp -p' - elif ln conf$$.file conf$$ 2>/dev/null; then - as_ln_s=ln - else - as_ln_s='cp -p' - fi -else - as_ln_s='cp -p' -fi -rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file -rmdir conf$$.dir 2>/dev/null - - -# as_fn_mkdir_p -# ------------- -# Create "$as_dir" as a directory, including parents if necessary. -as_fn_mkdir_p () -{ - - case $as_dir in #( - -*) as_dir=./$as_dir;; - esac - test -d "$as_dir" || eval $as_mkdir_p || { - as_dirs= - while :; do - case $as_dir in #( - *\'*) as_qdir=`$as_echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #'( - *) as_qdir=$as_dir;; - esac - as_dirs="'$as_qdir' $as_dirs" - as_dir=`$as_dirname -- "$as_dir" || -$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ - X"$as_dir" : 'X\(//\)[^/]' \| \ - X"$as_dir" : 'X\(//\)$' \| \ - X"$as_dir" : 'X\(/\)' \| . 2>/dev/null || -$as_echo X"$as_dir" | - sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ - s//\1/ - q - } - /^X\(\/\/\)[^/].*/{ - s//\1/ - q - } - /^X\(\/\/\)$/{ - s//\1/ - q - } - /^X\(\/\).*/{ - s//\1/ - q - } - s/.*/./; q'` - test -d "$as_dir" && break - done - test -z "$as_dirs" || eval "mkdir $as_dirs" - } || test -d "$as_dir" || as_fn_error "cannot create directory $as_dir" - - -} # as_fn_mkdir_p -if mkdir -p . 2>/dev/null; then - as_mkdir_p='mkdir -p "$as_dir"' -else - test -d ./-p && rmdir ./-p - as_mkdir_p=false -fi - -if test -x / >/dev/null 2>&1; then - as_test_x='test -x' -else - if ls -dL / >/dev/null 2>&1; then - as_ls_L_option=L - else - as_ls_L_option= - fi - as_test_x=' - eval sh -c '\'' - if test -d "$1"; then - test -d "$1/."; - else - case $1 in #( - -*)set "./$1";; - esac; - case `ls -ld'$as_ls_L_option' "$1" 2>/dev/null` in #(( - ???[sx]*):;;*)false;;esac;fi - '\'' sh - ' -fi -as_executable_p=$as_test_x - -# Sed expression to map a string onto a valid CPP name. -as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'" - -# Sed expression to map a string onto a valid variable name. -as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'" - - -exec 6>&1 -## ----------------------------------- ## -## Main body of $CONFIG_STATUS script. ## -## ----------------------------------- ## -_ASEOF -test $as_write_fail = 0 && chmod +x $CONFIG_STATUS || ac_write_fail=1 - -cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 -# Save the log message, to keep $0 and so on meaningful, and to -# report actual input values of CONFIG_FILES etc. instead of their -# values after options handling. -ac_log=" -This file was extended by pixman $as_me 0.18.2, which was -generated by GNU Autoconf 2.65. Invocation command line was - - CONFIG_FILES = $CONFIG_FILES - CONFIG_HEADERS = $CONFIG_HEADERS - CONFIG_LINKS = $CONFIG_LINKS - CONFIG_COMMANDS = $CONFIG_COMMANDS - $ $0 $@ - -on `(hostname || uname -n) 2>/dev/null | sed 1q` -" - -_ACEOF - -case $ac_config_files in *" -"*) set x $ac_config_files; shift; ac_config_files=$*;; -esac - -case $ac_config_headers in *" -"*) set x $ac_config_headers; shift; ac_config_headers=$*;; -esac - - -cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 -# Files that config.status was made for. -config_files="$ac_config_files" -config_headers="$ac_config_headers" -config_commands="$ac_config_commands" - -_ACEOF - -cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 -ac_cs_usage="\ -\`$as_me' instantiates files and other configuration actions -from templates according to the current configuration. Unless the files -and actions are specified as TAGs, all are instantiated by default. - -Usage: $0 [OPTION]... [TAG]... - - -h, --help print this help, then exit - -V, --version print version number and configuration settings, then exit - --config print configuration, then exit - -q, --quiet, --silent - do not print progress messages - -d, --debug don't remove temporary files - --recheck update $as_me by reconfiguring in the same conditions - --file=FILE[:TEMPLATE] - instantiate the configuration file FILE - --header=FILE[:TEMPLATE] - instantiate the configuration header FILE - -Configuration files: -$config_files - -Configuration headers: -$config_headers - -Configuration commands: -$config_commands - -Report bugs to <"pixman@lists.freedesktop.org">." - -_ACEOF -cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 -ac_cs_config="`$as_echo "$ac_configure_args" | sed 's/^ //; s/[\\""\`\$]/\\\\&/g'`" -ac_cs_version="\\ -pixman config.status 0.18.2 -configured by $0, generated by GNU Autoconf 2.65, - with options \\"\$ac_cs_config\\" - -Copyright (C) 2009 Free Software Foundation, Inc. -This config.status script is free software; the Free Software Foundation -gives unlimited permission to copy, distribute and modify it." - -ac_pwd='$ac_pwd' -srcdir='$srcdir' -INSTALL='$INSTALL' -MKDIR_P='$MKDIR_P' -AWK='$AWK' -test -n "\$AWK" || AWK=awk -_ACEOF - -cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 -# The default lists apply if the user does not specify any file. -ac_need_defaults=: -while test $# != 0 -do - case $1 in - --*=*) - ac_option=`expr "X$1" : 'X\([^=]*\)='` - ac_optarg=`expr "X$1" : 'X[^=]*=\(.*\)'` - ac_shift=: - ;; - *) - ac_option=$1 - ac_optarg=$2 - ac_shift=shift - ;; - esac - - case $ac_option in - # Handling of the options. - -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r) - ac_cs_recheck=: ;; - --version | --versio | --versi | --vers | --ver | --ve | --v | -V ) - $as_echo "$ac_cs_version"; exit ;; - --config | --confi | --conf | --con | --co | --c ) - $as_echo "$ac_cs_config"; exit ;; - --debug | --debu | --deb | --de | --d | -d ) - debug=: ;; - --file | --fil | --fi | --f ) - $ac_shift - case $ac_optarg in - *\'*) ac_optarg=`$as_echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"` ;; - esac - as_fn_append CONFIG_FILES " '$ac_optarg'" - ac_need_defaults=false;; - --header | --heade | --head | --hea ) - $ac_shift - case $ac_optarg in - *\'*) ac_optarg=`$as_echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"` ;; - esac - as_fn_append CONFIG_HEADERS " '$ac_optarg'" - ac_need_defaults=false;; - --he | --h) - # Conflict between --help and --header - as_fn_error "ambiguous option: \`$1' -Try \`$0 --help' for more information.";; - --help | --hel | -h ) - $as_echo "$ac_cs_usage"; exit ;; - -q | -quiet | --quiet | --quie | --qui | --qu | --q \ - | -silent | --silent | --silen | --sile | --sil | --si | --s) - ac_cs_silent=: ;; - - # This is an error. - -*) as_fn_error "unrecognized option: \`$1' -Try \`$0 --help' for more information." ;; - - *) as_fn_append ac_config_targets " $1" - ac_need_defaults=false ;; - - esac - shift -done - -ac_configure_extra_args= - -if $ac_cs_silent; then - exec 6>/dev/null - ac_configure_extra_args="$ac_configure_extra_args --silent" -fi - -_ACEOF -cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 -if \$ac_cs_recheck; then - set X '$SHELL' '$0' $ac_configure_args \$ac_configure_extra_args --no-create --no-recursion - shift - \$as_echo "running CONFIG_SHELL=$SHELL \$*" >&6 - CONFIG_SHELL='$SHELL' - export CONFIG_SHELL - exec "\$@" -fi - -_ACEOF -cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 -exec 5>>config.log -{ - echo - sed 'h;s/./-/g;s/^.../## /;s/...$/ ##/;p;x;p;x' <<_ASBOX -## Running $as_me. ## -_ASBOX - $as_echo "$ac_log" -} >&5 - -_ACEOF -cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 -# -# INIT-COMMANDS -# -AMDEP_TRUE="$AMDEP_TRUE" ac_aux_dir="$ac_aux_dir" - - -# The HP-UX ksh and POSIX shell print the target directory to stdout -# if CDPATH is set. -(unset CDPATH) >/dev/null 2>&1 && unset CDPATH - -sed_quote_subst='$sed_quote_subst' -double_quote_subst='$double_quote_subst' -delay_variable_subst='$delay_variable_subst' -macro_version='`$ECHO "X$macro_version" | $Xsed -e "$delay_single_quote_subst"`' -macro_revision='`$ECHO "X$macro_revision" | $Xsed -e "$delay_single_quote_subst"`' -enable_shared='`$ECHO "X$enable_shared" | $Xsed -e "$delay_single_quote_subst"`' -enable_static='`$ECHO "X$enable_static" | $Xsed -e "$delay_single_quote_subst"`' -pic_mode='`$ECHO "X$pic_mode" | $Xsed -e "$delay_single_quote_subst"`' -enable_fast_install='`$ECHO "X$enable_fast_install" | $Xsed -e "$delay_single_quote_subst"`' -host_alias='`$ECHO "X$host_alias" | $Xsed -e "$delay_single_quote_subst"`' -host='`$ECHO "X$host" | $Xsed -e "$delay_single_quote_subst"`' -host_os='`$ECHO "X$host_os" | $Xsed -e "$delay_single_quote_subst"`' -build_alias='`$ECHO "X$build_alias" | $Xsed -e "$delay_single_quote_subst"`' -build='`$ECHO "X$build" | $Xsed -e "$delay_single_quote_subst"`' -build_os='`$ECHO "X$build_os" | $Xsed -e "$delay_single_quote_subst"`' -SED='`$ECHO "X$SED" | $Xsed -e "$delay_single_quote_subst"`' -Xsed='`$ECHO "X$Xsed" | $Xsed -e "$delay_single_quote_subst"`' -GREP='`$ECHO "X$GREP" | $Xsed -e "$delay_single_quote_subst"`' -EGREP='`$ECHO "X$EGREP" | $Xsed -e "$delay_single_quote_subst"`' -FGREP='`$ECHO "X$FGREP" | $Xsed -e "$delay_single_quote_subst"`' -LD='`$ECHO "X$LD" | $Xsed -e "$delay_single_quote_subst"`' -NM='`$ECHO "X$NM" | $Xsed -e "$delay_single_quote_subst"`' -LN_S='`$ECHO "X$LN_S" | $Xsed -e "$delay_single_quote_subst"`' -max_cmd_len='`$ECHO "X$max_cmd_len" | $Xsed -e "$delay_single_quote_subst"`' -ac_objext='`$ECHO "X$ac_objext" | $Xsed -e "$delay_single_quote_subst"`' -exeext='`$ECHO "X$exeext" | $Xsed -e "$delay_single_quote_subst"`' -lt_unset='`$ECHO "X$lt_unset" | $Xsed -e "$delay_single_quote_subst"`' -lt_SP2NL='`$ECHO "X$lt_SP2NL" | $Xsed -e "$delay_single_quote_subst"`' -lt_NL2SP='`$ECHO "X$lt_NL2SP" | $Xsed -e "$delay_single_quote_subst"`' -reload_flag='`$ECHO "X$reload_flag" | $Xsed -e "$delay_single_quote_subst"`' -reload_cmds='`$ECHO "X$reload_cmds" | $Xsed -e "$delay_single_quote_subst"`' -OBJDUMP='`$ECHO "X$OBJDUMP" | $Xsed -e "$delay_single_quote_subst"`' -deplibs_check_method='`$ECHO "X$deplibs_check_method" | $Xsed -e "$delay_single_quote_subst"`' -file_magic_cmd='`$ECHO "X$file_magic_cmd" | $Xsed -e "$delay_single_quote_subst"`' -AR='`$ECHO "X$AR" | $Xsed -e "$delay_single_quote_subst"`' -AR_FLAGS='`$ECHO "X$AR_FLAGS" | $Xsed -e "$delay_single_quote_subst"`' -STRIP='`$ECHO "X$STRIP" | $Xsed -e "$delay_single_quote_subst"`' -RANLIB='`$ECHO "X$RANLIB" | $Xsed -e "$delay_single_quote_subst"`' -old_postinstall_cmds='`$ECHO "X$old_postinstall_cmds" | $Xsed -e "$delay_single_quote_subst"`' -old_postuninstall_cmds='`$ECHO "X$old_postuninstall_cmds" | $Xsed -e "$delay_single_quote_subst"`' -old_archive_cmds='`$ECHO "X$old_archive_cmds" | $Xsed -e "$delay_single_quote_subst"`' -CC='`$ECHO "X$CC" | $Xsed -e "$delay_single_quote_subst"`' -CFLAGS='`$ECHO "X$CFLAGS" | $Xsed -e "$delay_single_quote_subst"`' -compiler='`$ECHO "X$compiler" | $Xsed -e "$delay_single_quote_subst"`' -GCC='`$ECHO "X$GCC" | $Xsed -e "$delay_single_quote_subst"`' -lt_cv_sys_global_symbol_pipe='`$ECHO "X$lt_cv_sys_global_symbol_pipe" | $Xsed -e "$delay_single_quote_subst"`' -lt_cv_sys_global_symbol_to_cdecl='`$ECHO "X$lt_cv_sys_global_symbol_to_cdecl" | $Xsed -e "$delay_single_quote_subst"`' -lt_cv_sys_global_symbol_to_c_name_address='`$ECHO "X$lt_cv_sys_global_symbol_to_c_name_address" | $Xsed -e "$delay_single_quote_subst"`' -lt_cv_sys_global_symbol_to_c_name_address_lib_prefix='`$ECHO "X$lt_cv_sys_global_symbol_to_c_name_address_lib_prefix" | $Xsed -e "$delay_single_quote_subst"`' -objdir='`$ECHO "X$objdir" | $Xsed -e "$delay_single_quote_subst"`' -SHELL='`$ECHO "X$SHELL" | $Xsed -e "$delay_single_quote_subst"`' -ECHO='`$ECHO "X$ECHO" | $Xsed -e "$delay_single_quote_subst"`' -MAGIC_CMD='`$ECHO "X$MAGIC_CMD" | $Xsed -e "$delay_single_quote_subst"`' -lt_prog_compiler_no_builtin_flag='`$ECHO "X$lt_prog_compiler_no_builtin_flag" | $Xsed -e "$delay_single_quote_subst"`' -lt_prog_compiler_wl='`$ECHO "X$lt_prog_compiler_wl" | $Xsed -e "$delay_single_quote_subst"`' -lt_prog_compiler_pic='`$ECHO "X$lt_prog_compiler_pic" | $Xsed -e "$delay_single_quote_subst"`' -lt_prog_compiler_static='`$ECHO "X$lt_prog_compiler_static" | $Xsed -e "$delay_single_quote_subst"`' -lt_cv_prog_compiler_c_o='`$ECHO "X$lt_cv_prog_compiler_c_o" | $Xsed -e "$delay_single_quote_subst"`' -need_locks='`$ECHO "X$need_locks" | $Xsed -e "$delay_single_quote_subst"`' -DSYMUTIL='`$ECHO "X$DSYMUTIL" | $Xsed -e "$delay_single_quote_subst"`' -NMEDIT='`$ECHO "X$NMEDIT" | $Xsed -e "$delay_single_quote_subst"`' -LIPO='`$ECHO "X$LIPO" | $Xsed -e "$delay_single_quote_subst"`' -OTOOL='`$ECHO "X$OTOOL" | $Xsed -e "$delay_single_quote_subst"`' -OTOOL64='`$ECHO "X$OTOOL64" | $Xsed -e "$delay_single_quote_subst"`' -libext='`$ECHO "X$libext" | $Xsed -e "$delay_single_quote_subst"`' -shrext_cmds='`$ECHO "X$shrext_cmds" | $Xsed -e "$delay_single_quote_subst"`' -extract_expsyms_cmds='`$ECHO "X$extract_expsyms_cmds" | $Xsed -e "$delay_single_quote_subst"`' -archive_cmds_need_lc='`$ECHO "X$archive_cmds_need_lc" | $Xsed -e "$delay_single_quote_subst"`' -enable_shared_with_static_runtimes='`$ECHO "X$enable_shared_with_static_runtimes" | $Xsed -e "$delay_single_quote_subst"`' -export_dynamic_flag_spec='`$ECHO "X$export_dynamic_flag_spec" | $Xsed -e "$delay_single_quote_subst"`' -whole_archive_flag_spec='`$ECHO "X$whole_archive_flag_spec" | $Xsed -e "$delay_single_quote_subst"`' -compiler_needs_object='`$ECHO "X$compiler_needs_object" | $Xsed -e "$delay_single_quote_subst"`' -old_archive_from_new_cmds='`$ECHO "X$old_archive_from_new_cmds" | $Xsed -e "$delay_single_quote_subst"`' -old_archive_from_expsyms_cmds='`$ECHO "X$old_archive_from_expsyms_cmds" | $Xsed -e "$delay_single_quote_subst"`' -archive_cmds='`$ECHO "X$archive_cmds" | $Xsed -e "$delay_single_quote_subst"`' -archive_expsym_cmds='`$ECHO "X$archive_expsym_cmds" | $Xsed -e "$delay_single_quote_subst"`' -module_cmds='`$ECHO "X$module_cmds" | $Xsed -e "$delay_single_quote_subst"`' -module_expsym_cmds='`$ECHO "X$module_expsym_cmds" | $Xsed -e "$delay_single_quote_subst"`' -with_gnu_ld='`$ECHO "X$with_gnu_ld" | $Xsed -e "$delay_single_quote_subst"`' -allow_undefined_flag='`$ECHO "X$allow_undefined_flag" | $Xsed -e "$delay_single_quote_subst"`' -no_undefined_flag='`$ECHO "X$no_undefined_flag" | $Xsed -e "$delay_single_quote_subst"`' -hardcode_libdir_flag_spec='`$ECHO "X$hardcode_libdir_flag_spec" | $Xsed -e "$delay_single_quote_subst"`' -hardcode_libdir_flag_spec_ld='`$ECHO "X$hardcode_libdir_flag_spec_ld" | $Xsed -e "$delay_single_quote_subst"`' -hardcode_libdir_separator='`$ECHO "X$hardcode_libdir_separator" | $Xsed -e "$delay_single_quote_subst"`' -hardcode_direct='`$ECHO "X$hardcode_direct" | $Xsed -e "$delay_single_quote_subst"`' -hardcode_direct_absolute='`$ECHO "X$hardcode_direct_absolute" | $Xsed -e "$delay_single_quote_subst"`' -hardcode_minus_L='`$ECHO "X$hardcode_minus_L" | $Xsed -e "$delay_single_quote_subst"`' -hardcode_shlibpath_var='`$ECHO "X$hardcode_shlibpath_var" | $Xsed -e "$delay_single_quote_subst"`' -hardcode_automatic='`$ECHO "X$hardcode_automatic" | $Xsed -e "$delay_single_quote_subst"`' -inherit_rpath='`$ECHO "X$inherit_rpath" | $Xsed -e "$delay_single_quote_subst"`' -link_all_deplibs='`$ECHO "X$link_all_deplibs" | $Xsed -e "$delay_single_quote_subst"`' -fix_srcfile_path='`$ECHO "X$fix_srcfile_path" | $Xsed -e "$delay_single_quote_subst"`' -always_export_symbols='`$ECHO "X$always_export_symbols" | $Xsed -e "$delay_single_quote_subst"`' -export_symbols_cmds='`$ECHO "X$export_symbols_cmds" | $Xsed -e "$delay_single_quote_subst"`' -exclude_expsyms='`$ECHO "X$exclude_expsyms" | $Xsed -e "$delay_single_quote_subst"`' -include_expsyms='`$ECHO "X$include_expsyms" | $Xsed -e "$delay_single_quote_subst"`' -prelink_cmds='`$ECHO "X$prelink_cmds" | $Xsed -e "$delay_single_quote_subst"`' -file_list_spec='`$ECHO "X$file_list_spec" | $Xsed -e "$delay_single_quote_subst"`' -variables_saved_for_relink='`$ECHO "X$variables_saved_for_relink" | $Xsed -e "$delay_single_quote_subst"`' -need_lib_prefix='`$ECHO "X$need_lib_prefix" | $Xsed -e "$delay_single_quote_subst"`' -need_version='`$ECHO "X$need_version" | $Xsed -e "$delay_single_quote_subst"`' -version_type='`$ECHO "X$version_type" | $Xsed -e "$delay_single_quote_subst"`' -runpath_var='`$ECHO "X$runpath_var" | $Xsed -e "$delay_single_quote_subst"`' -shlibpath_var='`$ECHO "X$shlibpath_var" | $Xsed -e "$delay_single_quote_subst"`' -shlibpath_overrides_runpath='`$ECHO "X$shlibpath_overrides_runpath" | $Xsed -e "$delay_single_quote_subst"`' -libname_spec='`$ECHO "X$libname_spec" | $Xsed -e "$delay_single_quote_subst"`' -library_names_spec='`$ECHO "X$library_names_spec" | $Xsed -e "$delay_single_quote_subst"`' -soname_spec='`$ECHO "X$soname_spec" | $Xsed -e "$delay_single_quote_subst"`' -postinstall_cmds='`$ECHO "X$postinstall_cmds" | $Xsed -e "$delay_single_quote_subst"`' -postuninstall_cmds='`$ECHO "X$postuninstall_cmds" | $Xsed -e "$delay_single_quote_subst"`' -finish_cmds='`$ECHO "X$finish_cmds" | $Xsed -e "$delay_single_quote_subst"`' -finish_eval='`$ECHO "X$finish_eval" | $Xsed -e "$delay_single_quote_subst"`' -hardcode_into_libs='`$ECHO "X$hardcode_into_libs" | $Xsed -e "$delay_single_quote_subst"`' -sys_lib_search_path_spec='`$ECHO "X$sys_lib_search_path_spec" | $Xsed -e "$delay_single_quote_subst"`' -sys_lib_dlsearch_path_spec='`$ECHO "X$sys_lib_dlsearch_path_spec" | $Xsed -e "$delay_single_quote_subst"`' -hardcode_action='`$ECHO "X$hardcode_action" | $Xsed -e "$delay_single_quote_subst"`' -enable_dlopen='`$ECHO "X$enable_dlopen" | $Xsed -e "$delay_single_quote_subst"`' -enable_dlopen_self='`$ECHO "X$enable_dlopen_self" | $Xsed -e "$delay_single_quote_subst"`' -enable_dlopen_self_static='`$ECHO "X$enable_dlopen_self_static" | $Xsed -e "$delay_single_quote_subst"`' -old_striplib='`$ECHO "X$old_striplib" | $Xsed -e "$delay_single_quote_subst"`' -striplib='`$ECHO "X$striplib" | $Xsed -e "$delay_single_quote_subst"`' - -LTCC='$LTCC' -LTCFLAGS='$LTCFLAGS' -compiler='$compiler_DEFAULT' - -# Quote evaled strings. -for var in SED \ -GREP \ -EGREP \ -FGREP \ -LD \ -NM \ -LN_S \ -lt_SP2NL \ -lt_NL2SP \ -reload_flag \ -OBJDUMP \ -deplibs_check_method \ -file_magic_cmd \ -AR \ -AR_FLAGS \ -STRIP \ -RANLIB \ -CC \ -CFLAGS \ -compiler \ -lt_cv_sys_global_symbol_pipe \ -lt_cv_sys_global_symbol_to_cdecl \ -lt_cv_sys_global_symbol_to_c_name_address \ -lt_cv_sys_global_symbol_to_c_name_address_lib_prefix \ -SHELL \ -ECHO \ -lt_prog_compiler_no_builtin_flag \ -lt_prog_compiler_wl \ -lt_prog_compiler_pic \ -lt_prog_compiler_static \ -lt_cv_prog_compiler_c_o \ -need_locks \ -DSYMUTIL \ -NMEDIT \ -LIPO \ -OTOOL \ -OTOOL64 \ -shrext_cmds \ -export_dynamic_flag_spec \ -whole_archive_flag_spec \ -compiler_needs_object \ -with_gnu_ld \ -allow_undefined_flag \ -no_undefined_flag \ -hardcode_libdir_flag_spec \ -hardcode_libdir_flag_spec_ld \ -hardcode_libdir_separator \ -fix_srcfile_path \ -exclude_expsyms \ -include_expsyms \ -file_list_spec \ -variables_saved_for_relink \ -libname_spec \ -library_names_spec \ -soname_spec \ -finish_eval \ -old_striplib \ -striplib; do - case \`eval \\\\\$ECHO "X\\\\\$\$var"\` in - *[\\\\\\\`\\"\\\$]*) - eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"X\\\$\$var\\" | \\\$Xsed -e \\"\\\$sed_quote_subst\\"\\\`\\\\\\"" - ;; - *) - eval "lt_\$var=\\\\\\"\\\$\$var\\\\\\"" - ;; - esac -done - -# Double-quote double-evaled strings. -for var in reload_cmds \ -old_postinstall_cmds \ -old_postuninstall_cmds \ -old_archive_cmds \ -extract_expsyms_cmds \ -old_archive_from_new_cmds \ -old_archive_from_expsyms_cmds \ -archive_cmds \ -archive_expsym_cmds \ -module_cmds \ -module_expsym_cmds \ -export_symbols_cmds \ -prelink_cmds \ -postinstall_cmds \ -postuninstall_cmds \ -finish_cmds \ -sys_lib_search_path_spec \ -sys_lib_dlsearch_path_spec; do - case \`eval \\\\\$ECHO "X\\\\\$\$var"\` in - *[\\\\\\\`\\"\\\$]*) - eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"X\\\$\$var\\" | \\\$Xsed -e \\"\\\$double_quote_subst\\" -e \\"\\\$sed_quote_subst\\" -e \\"\\\$delay_variable_subst\\"\\\`\\\\\\"" - ;; - *) - eval "lt_\$var=\\\\\\"\\\$\$var\\\\\\"" - ;; - esac -done - -# Fix-up fallback echo if it was mangled by the above quoting rules. -case \$lt_ECHO in -*'\\\$0 --fallback-echo"') lt_ECHO=\`\$ECHO "X\$lt_ECHO" | \$Xsed -e 's/\\\\\\\\\\\\\\\$0 --fallback-echo"\$/\$0 --fallback-echo"/'\` - ;; -esac - -ac_aux_dir='$ac_aux_dir' -xsi_shell='$xsi_shell' -lt_shell_append='$lt_shell_append' - -# See if we are running on zsh, and set the options which allow our -# commands through without removal of \ escapes INIT. -if test -n "\${ZSH_VERSION+set}" ; then - setopt NO_GLOB_SUBST -fi - - - PACKAGE='$PACKAGE' - VERSION='$VERSION' - TIMESTAMP='$TIMESTAMP' - RM='$RM' - ofile='$ofile' - - - - -_ACEOF - -cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 - -# Handling of arguments. -for ac_config_target in $ac_config_targets -do - case $ac_config_target in - "config.h") CONFIG_HEADERS="$CONFIG_HEADERS config.h" ;; - "depfiles") CONFIG_COMMANDS="$CONFIG_COMMANDS depfiles" ;; - "libtool") CONFIG_COMMANDS="$CONFIG_COMMANDS libtool" ;; - "pixman-1.pc") CONFIG_FILES="$CONFIG_FILES pixman-1.pc" ;; - "pixman-1-uninstalled.pc") CONFIG_FILES="$CONFIG_FILES pixman-1-uninstalled.pc" ;; - "Makefile") CONFIG_FILES="$CONFIG_FILES Makefile" ;; - "pixman/Makefile") CONFIG_FILES="$CONFIG_FILES pixman/Makefile" ;; - "pixman/pixman-version.h") CONFIG_FILES="$CONFIG_FILES pixman/pixman-version.h" ;; - "test/Makefile") CONFIG_FILES="$CONFIG_FILES test/Makefile" ;; - - *) as_fn_error "invalid argument: \`$ac_config_target'" "$LINENO" 5;; - esac -done - - -# If the user did not use the arguments to specify the items to instantiate, -# then the envvar interface is used. Set only those that are not. -# We use the long form for the default assignment because of an extremely -# bizarre bug on SunOS 4.1.3. -if $ac_need_defaults; then - test "${CONFIG_FILES+set}" = set || CONFIG_FILES=$config_files - test "${CONFIG_HEADERS+set}" = set || CONFIG_HEADERS=$config_headers - test "${CONFIG_COMMANDS+set}" = set || CONFIG_COMMANDS=$config_commands -fi - -# Have a temporary directory for convenience. Make it in the build tree -# simply because there is no reason against having it here, and in addition, -# creating and moving files from /tmp can sometimes cause problems. -# Hook for its removal unless debugging. -# Note that there is a small window in which the directory will not be cleaned: -# after its creation but before its name has been assigned to `$tmp'. -$debug || -{ - tmp= - trap 'exit_status=$? - { test -z "$tmp" || test ! -d "$tmp" || rm -fr "$tmp"; } && exit $exit_status -' 0 - trap 'as_fn_exit 1' 1 2 13 15 -} -# Create a (secure) tmp directory for tmp files. - -{ - tmp=`(umask 077 && mktemp -d "./confXXXXXX") 2>/dev/null` && - test -n "$tmp" && test -d "$tmp" -} || -{ - tmp=./conf$$-$RANDOM - (umask 077 && mkdir "$tmp") -} || as_fn_error "cannot create a temporary directory in ." "$LINENO" 5 - -# Set up the scripts for CONFIG_FILES section. -# No need to generate them if there are no CONFIG_FILES. -# This happens for instance with `./config.status config.h'. -if test -n "$CONFIG_FILES"; then - - -ac_cr=`echo X | tr X '\015'` -# On cygwin, bash can eat \r inside `` if the user requested igncr. -# But we know of no other shell where ac_cr would be empty at this -# point, so we can use a bashism as a fallback. -if test "x$ac_cr" = x; then - eval ac_cr=\$\'\\r\' -fi -ac_cs_awk_cr=`$AWK 'BEGIN { print "a\rb" }' </dev/null 2>/dev/null` -if test "$ac_cs_awk_cr" = "a${ac_cr}b"; then - ac_cs_awk_cr='\r' -else - ac_cs_awk_cr=$ac_cr -fi - -echo 'BEGIN {' >"$tmp/subs1.awk" && -_ACEOF - - -{ - echo "cat >conf$$subs.awk <<_ACEOF" && - echo "$ac_subst_vars" | sed 's/.*/&!$&$ac_delim/' && - echo "_ACEOF" -} >conf$$subs.sh || - as_fn_error "could not make $CONFIG_STATUS" "$LINENO" 5 -ac_delim_num=`echo "$ac_subst_vars" | grep -c '$'` -ac_delim='%!_!# ' -for ac_last_try in false false false false false :; do - . ./conf$$subs.sh || - as_fn_error "could not make $CONFIG_STATUS" "$LINENO" 5 - - ac_delim_n=`sed -n "s/.*$ac_delim\$/X/p" conf$$subs.awk | grep -c X` - if test $ac_delim_n = $ac_delim_num; then - break - elif $ac_last_try; then - as_fn_error "could not make $CONFIG_STATUS" "$LINENO" 5 - else - ac_delim="$ac_delim!$ac_delim _$ac_delim!! " - fi -done -rm -f conf$$subs.sh - -cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 -cat >>"\$tmp/subs1.awk" <<\\_ACAWK && -_ACEOF -sed -n ' -h -s/^/S["/; s/!.*/"]=/ -p -g -s/^[^!]*!// -:repl -t repl -s/'"$ac_delim"'$// -t delim -:nl -h -s/\(.\{148\}\)..*/\1/ -t more1 -s/["\\]/\\&/g; s/^/"/; s/$/\\n"\\/ -p -n -b repl -:more1 -s/["\\]/\\&/g; s/^/"/; s/$/"\\/ -p -g -s/.\{148\}// -t nl -:delim -h -s/\(.\{148\}\)..*/\1/ -t more2 -s/["\\]/\\&/g; s/^/"/; s/$/"/ -p -b -:more2 -s/["\\]/\\&/g; s/^/"/; s/$/"\\/ -p -g -s/.\{148\}// -t delim -' <conf$$subs.awk | sed ' -/^[^""]/{ - N - s/\n// -} -' >>$CONFIG_STATUS || ac_write_fail=1 -rm -f conf$$subs.awk -cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 -_ACAWK -cat >>"\$tmp/subs1.awk" <<_ACAWK && - for (key in S) S_is_set[key] = 1 - FS = "" - -} -{ - line = $ 0 - nfields = split(line, field, "@") - substed = 0 - len = length(field[1]) - for (i = 2; i < nfields; i++) { - key = field[i] - keylen = length(key) - if (S_is_set[key]) { - value = S[key] - line = substr(line, 1, len) "" value "" substr(line, len + keylen + 3) - len += length(value) + length(field[++i]) - substed = 1 - } else - len += 1 + keylen - } - - print line -} - -_ACAWK -_ACEOF -cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 -if sed "s/$ac_cr//" < /dev/null > /dev/null 2>&1; then - sed "s/$ac_cr\$//; s/$ac_cr/$ac_cs_awk_cr/g" -else - cat -fi < "$tmp/subs1.awk" > "$tmp/subs.awk" \ - || as_fn_error "could not setup config files machinery" "$LINENO" 5 -_ACEOF - -# VPATH may cause trouble with some makes, so we remove $(srcdir), -# ${srcdir} and @srcdir@ from VPATH if srcdir is ".", strip leading and -# trailing colons and then remove the whole line if VPATH becomes empty -# (actually we leave an empty line to preserve line numbers). -if test "x$srcdir" = x.; then - ac_vpsub='/^[ ]*VPATH[ ]*=/{ -s/:*\$(srcdir):*/:/ -s/:*\${srcdir}:*/:/ -s/:*@srcdir@:*/:/ -s/^\([^=]*=[ ]*\):*/\1/ -s/:*$// -s/^[^=]*=[ ]*$// -}' -fi - -cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 -fi # test -n "$CONFIG_FILES" - -# Set up the scripts for CONFIG_HEADERS section. -# No need to generate them if there are no CONFIG_HEADERS. -# This happens for instance with `./config.status Makefile'. -if test -n "$CONFIG_HEADERS"; then -cat >"$tmp/defines.awk" <<\_ACAWK || -BEGIN { -_ACEOF - -# Transform confdefs.h into an awk script `defines.awk', embedded as -# here-document in config.status, that substitutes the proper values into -# config.h.in to produce config.h. - -# Create a delimiter string that does not exist in confdefs.h, to ease -# handling of long lines. -ac_delim='%!_!# ' -for ac_last_try in false false :; do - ac_t=`sed -n "/$ac_delim/p" confdefs.h` - if test -z "$ac_t"; then - break - elif $ac_last_try; then - as_fn_error "could not make $CONFIG_HEADERS" "$LINENO" 5 - else - ac_delim="$ac_delim!$ac_delim _$ac_delim!! " - fi -done - -# For the awk script, D is an array of macro values keyed by name, -# likewise P contains macro parameters if any. Preserve backslash -# newline sequences. - -ac_word_re=[_$as_cr_Letters][_$as_cr_alnum]* -sed -n ' -s/.\{148\}/&'"$ac_delim"'/g -t rset -:rset -s/^[ ]*#[ ]*define[ ][ ]*/ / -t def -d -:def -s/\\$// -t bsnl -s/["\\]/\\&/g -s/^ \('"$ac_word_re"'\)\(([^()]*)\)[ ]*\(.*\)/P["\1"]="\2"\ -D["\1"]=" \3"/p -s/^ \('"$ac_word_re"'\)[ ]*\(.*\)/D["\1"]=" \2"/p -d -:bsnl -s/["\\]/\\&/g -s/^ \('"$ac_word_re"'\)\(([^()]*)\)[ ]*\(.*\)/P["\1"]="\2"\ -D["\1"]=" \3\\\\\\n"\\/p -t cont -s/^ \('"$ac_word_re"'\)[ ]*\(.*\)/D["\1"]=" \2\\\\\\n"\\/p -t cont -d -:cont -n -s/.\{148\}/&'"$ac_delim"'/g -t clear -:clear -s/\\$// -t bsnlc -s/["\\]/\\&/g; s/^/"/; s/$/"/p -d -:bsnlc -s/["\\]/\\&/g; s/^/"/; s/$/\\\\\\n"\\/p -b cont -' <confdefs.h | sed ' -s/'"$ac_delim"'/"\\\ -"/g' >>$CONFIG_STATUS || ac_write_fail=1 - -cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 - for (key in D) D_is_set[key] = 1 - FS = "" -} -/^[\t ]*#[\t ]*(define|undef)[\t ]+$ac_word_re([\t (]|\$)/ { - line = \$ 0 - split(line, arg, " ") - if (arg[1] == "#") { - defundef = arg[2] - mac1 = arg[3] - } else { - defundef = substr(arg[1], 2) - mac1 = arg[2] - } - split(mac1, mac2, "(") #) - macro = mac2[1] - prefix = substr(line, 1, index(line, defundef) - 1) - if (D_is_set[macro]) { - # Preserve the white space surrounding the "#". - print prefix "define", macro P[macro] D[macro] - next - } else { - # Replace #undef with comments. This is necessary, for example, - # in the case of _POSIX_SOURCE, which is predefined and required - # on some systems where configure will not decide to define it. - if (defundef == "undef") { - print "/*", prefix defundef, macro, "*/" - next - } - } -} -{ print } -_ACAWK -_ACEOF -cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 - as_fn_error "could not setup config headers machinery" "$LINENO" 5 -fi # test -n "$CONFIG_HEADERS" - - -eval set X " :F $CONFIG_FILES :H $CONFIG_HEADERS :C $CONFIG_COMMANDS" -shift -for ac_tag -do - case $ac_tag in - :[FHLC]) ac_mode=$ac_tag; continue;; - esac - case $ac_mode$ac_tag in - :[FHL]*:*);; - :L* | :C*:*) as_fn_error "invalid tag \`$ac_tag'" "$LINENO" 5;; - :[FH]-) ac_tag=-:-;; - :[FH]*) ac_tag=$ac_tag:$ac_tag.in;; - esac - ac_save_IFS=$IFS - IFS=: - set x $ac_tag - IFS=$ac_save_IFS - shift - ac_file=$1 - shift - - case $ac_mode in - :L) ac_source=$1;; - :[FH]) - ac_file_inputs= - for ac_f - do - case $ac_f in - -) ac_f="$tmp/stdin";; - *) # Look for the file first in the build tree, then in the source tree - # (if the path is not absolute). The absolute path cannot be DOS-style, - # because $ac_f cannot contain `:'. - test -f "$ac_f" || - case $ac_f in - [\\/$]*) false;; - *) test -f "$srcdir/$ac_f" && ac_f="$srcdir/$ac_f";; - esac || - as_fn_error "cannot find input file: \`$ac_f'" "$LINENO" 5;; - esac - case $ac_f in *\'*) ac_f=`$as_echo "$ac_f" | sed "s/'/'\\\\\\\\''/g"`;; esac - as_fn_append ac_file_inputs " '$ac_f'" - done - - # Let's still pretend it is `configure' which instantiates (i.e., don't - # use $as_me), people would be surprised to read: - # /* config.h. Generated by config.status. */ - configure_input='Generated from '` - $as_echo "$*" | sed 's|^[^:]*/||;s|:[^:]*/|, |g' - `' by configure.' - if test x"$ac_file" != x-; then - configure_input="$ac_file. $configure_input" - { $as_echo "$as_me:${as_lineno-$LINENO}: creating $ac_file" >&5 -$as_echo "$as_me: creating $ac_file" >&6;} - fi - # Neutralize special characters interpreted by sed in replacement strings. - case $configure_input in #( - *\&* | *\|* | *\\* ) - ac_sed_conf_input=`$as_echo "$configure_input" | - sed 's/[\\\\&|]/\\\\&/g'`;; #( - *) ac_sed_conf_input=$configure_input;; - esac - - case $ac_tag in - *:-:* | *:-) cat >"$tmp/stdin" \ - || as_fn_error "could not create $ac_file" "$LINENO" 5 ;; - esac - ;; - esac - - ac_dir=`$as_dirname -- "$ac_file" || -$as_expr X"$ac_file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ - X"$ac_file" : 'X\(//\)[^/]' \| \ - X"$ac_file" : 'X\(//\)$' \| \ - X"$ac_file" : 'X\(/\)' \| . 2>/dev/null || -$as_echo X"$ac_file" | - sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ - s//\1/ - q - } - /^X\(\/\/\)[^/].*/{ - s//\1/ - q - } - /^X\(\/\/\)$/{ - s//\1/ - q - } - /^X\(\/\).*/{ - s//\1/ - q - } - s/.*/./; q'` - as_dir="$ac_dir"; as_fn_mkdir_p - ac_builddir=. - -case "$ac_dir" in -.) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;; -*) - ac_dir_suffix=/`$as_echo "$ac_dir" | sed 's|^\.[\\/]||'` - # A ".." for each directory in $ac_dir_suffix. - ac_top_builddir_sub=`$as_echo "$ac_dir_suffix" | sed 's|/[^\\/]*|/..|g;s|/||'` - case $ac_top_builddir_sub in - "") ac_top_builddir_sub=. ac_top_build_prefix= ;; - *) ac_top_build_prefix=$ac_top_builddir_sub/ ;; - esac ;; -esac -ac_abs_top_builddir=$ac_pwd -ac_abs_builddir=$ac_pwd$ac_dir_suffix -# for backward compatibility: -ac_top_builddir=$ac_top_build_prefix - -case $srcdir in - .) # We are building in place. - ac_srcdir=. - ac_top_srcdir=$ac_top_builddir_sub - ac_abs_top_srcdir=$ac_pwd ;; - [\\/]* | ?:[\\/]* ) # Absolute name. - ac_srcdir=$srcdir$ac_dir_suffix; - ac_top_srcdir=$srcdir - ac_abs_top_srcdir=$srcdir ;; - *) # Relative name. - ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix - ac_top_srcdir=$ac_top_build_prefix$srcdir - ac_abs_top_srcdir=$ac_pwd/$srcdir ;; -esac -ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix - - - case $ac_mode in - :F) - # - # CONFIG_FILE - # - - case $INSTALL in - [\\/$]* | ?:[\\/]* ) ac_INSTALL=$INSTALL ;; - *) ac_INSTALL=$ac_top_build_prefix$INSTALL ;; - esac - ac_MKDIR_P=$MKDIR_P - case $MKDIR_P in - [\\/$]* | ?:[\\/]* ) ;; - */*) ac_MKDIR_P=$ac_top_build_prefix$MKDIR_P ;; - esac -_ACEOF - -cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 -# If the template does not know about datarootdir, expand it. -# FIXME: This hack should be removed a few years after 2.60. -ac_datarootdir_hack=; ac_datarootdir_seen= -ac_sed_dataroot=' -/datarootdir/ { - p - q -} -/@datadir@/p -/@docdir@/p -/@infodir@/p -/@localedir@/p -/@mandir@/p' -case `eval "sed -n \"\$ac_sed_dataroot\" $ac_file_inputs"` in -*datarootdir*) ac_datarootdir_seen=yes;; -*@datadir@*|*@docdir@*|*@infodir@*|*@localedir@*|*@mandir@*) - { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&5 -$as_echo "$as_me: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&2;} -_ACEOF -cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 - ac_datarootdir_hack=' - s&@datadir@&$datadir&g - s&@docdir@&$docdir&g - s&@infodir@&$infodir&g - s&@localedir@&$localedir&g - s&@mandir@&$mandir&g - s&\\\${datarootdir}&$datarootdir&g' ;; -esac -_ACEOF - -# Neutralize VPATH when `$srcdir' = `.'. -# Shell code in configure.ac might set extrasub. -# FIXME: do we really want to maintain this feature? -cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 -ac_sed_extra="$ac_vpsub -$extrasub -_ACEOF -cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 -:t -/@[a-zA-Z_][a-zA-Z_0-9]*@/!b -s|@configure_input@|$ac_sed_conf_input|;t t -s&@top_builddir@&$ac_top_builddir_sub&;t t -s&@top_build_prefix@&$ac_top_build_prefix&;t t -s&@srcdir@&$ac_srcdir&;t t -s&@abs_srcdir@&$ac_abs_srcdir&;t t -s&@top_srcdir@&$ac_top_srcdir&;t t -s&@abs_top_srcdir@&$ac_abs_top_srcdir&;t t -s&@builddir@&$ac_builddir&;t t -s&@abs_builddir@&$ac_abs_builddir&;t t -s&@abs_top_builddir@&$ac_abs_top_builddir&;t t -s&@INSTALL@&$ac_INSTALL&;t t -s&@MKDIR_P@&$ac_MKDIR_P&;t t -$ac_datarootdir_hack -" -eval sed \"\$ac_sed_extra\" "$ac_file_inputs" | $AWK -f "$tmp/subs.awk" >$tmp/out \ - || as_fn_error "could not create $ac_file" "$LINENO" 5 - -test -z "$ac_datarootdir_hack$ac_datarootdir_seen" && - { ac_out=`sed -n '/\${datarootdir}/p' "$tmp/out"`; test -n "$ac_out"; } && - { ac_out=`sed -n '/^[ ]*datarootdir[ ]*:*=/p' "$tmp/out"`; test -z "$ac_out"; } && - { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $ac_file contains a reference to the variable \`datarootdir' -which seems to be undefined. Please make sure it is defined." >&5 -$as_echo "$as_me: WARNING: $ac_file contains a reference to the variable \`datarootdir' -which seems to be undefined. Please make sure it is defined." >&2;} - - rm -f "$tmp/stdin" - case $ac_file in - -) cat "$tmp/out" && rm -f "$tmp/out";; - *) rm -f "$ac_file" && mv "$tmp/out" "$ac_file";; - esac \ - || as_fn_error "could not create $ac_file" "$LINENO" 5 - ;; - :H) - # - # CONFIG_HEADER - # - if test x"$ac_file" != x-; then - { - $as_echo "/* $configure_input */" \ - && eval '$AWK -f "$tmp/defines.awk"' "$ac_file_inputs" - } >"$tmp/config.h" \ - || as_fn_error "could not create $ac_file" "$LINENO" 5 - if diff "$ac_file" "$tmp/config.h" >/dev/null 2>&1; then - { $as_echo "$as_me:${as_lineno-$LINENO}: $ac_file is unchanged" >&5 -$as_echo "$as_me: $ac_file is unchanged" >&6;} - else - rm -f "$ac_file" - mv "$tmp/config.h" "$ac_file" \ - || as_fn_error "could not create $ac_file" "$LINENO" 5 - fi - else - $as_echo "/* $configure_input */" \ - && eval '$AWK -f "$tmp/defines.awk"' "$ac_file_inputs" \ - || as_fn_error "could not create -" "$LINENO" 5 - fi -# Compute "$ac_file"'s index in $config_headers. -_am_arg="$ac_file" -_am_stamp_count=1 -for _am_header in $config_headers :; do - case $_am_header in - $_am_arg | $_am_arg:* ) - break ;; - * ) - _am_stamp_count=`expr $_am_stamp_count + 1` ;; - esac -done -echo "timestamp for $_am_arg" >`$as_dirname -- "$_am_arg" || -$as_expr X"$_am_arg" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ - X"$_am_arg" : 'X\(//\)[^/]' \| \ - X"$_am_arg" : 'X\(//\)$' \| \ - X"$_am_arg" : 'X\(/\)' \| . 2>/dev/null || -$as_echo X"$_am_arg" | - sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ - s//\1/ - q - } - /^X\(\/\/\)[^/].*/{ - s//\1/ - q - } - /^X\(\/\/\)$/{ - s//\1/ - q - } - /^X\(\/\).*/{ - s//\1/ - q - } - s/.*/./; q'`/stamp-h$_am_stamp_count - ;; - - :C) { $as_echo "$as_me:${as_lineno-$LINENO}: executing $ac_file commands" >&5 -$as_echo "$as_me: executing $ac_file commands" >&6;} - ;; - esac - - - case $ac_file$ac_mode in - "depfiles":C) test x"$AMDEP_TRUE" != x"" || { - # Autoconf 2.62 quotes --file arguments for eval, but not when files - # are listed without --file. Let's play safe and only enable the eval - # if we detect the quoting. - case $CONFIG_FILES in - *\'*) eval set x "$CONFIG_FILES" ;; - *) set x $CONFIG_FILES ;; - esac - shift - for mf - do - # Strip MF so we end up with the name of the file. - mf=`echo "$mf" | sed -e 's/:.*$//'` - # Check whether this is an Automake generated Makefile or not. - # We used to match only the files named `Makefile.in', but - # some people rename them; so instead we look at the file content. - # Grep'ing the first line is not enough: some people post-process - # each Makefile.in and add a new line on top of each file to say so. - # Grep'ing the whole file is not good either: AIX grep has a line - # limit of 2048, but all sed's we know have understand at least 4000. - if sed -n 's,^#.*generated by automake.*,X,p' "$mf" | grep X >/dev/null 2>&1; then - dirpart=`$as_dirname -- "$mf" || -$as_expr X"$mf" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ - X"$mf" : 'X\(//\)[^/]' \| \ - X"$mf" : 'X\(//\)$' \| \ - X"$mf" : 'X\(/\)' \| . 2>/dev/null || -$as_echo X"$mf" | - sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ - s//\1/ - q - } - /^X\(\/\/\)[^/].*/{ - s//\1/ - q - } - /^X\(\/\/\)$/{ - s//\1/ - q - } - /^X\(\/\).*/{ - s//\1/ - q - } - s/.*/./; q'` - else - continue - fi - # Extract the definition of DEPDIR, am__include, and am__quote - # from the Makefile without running `make'. - DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"` - test -z "$DEPDIR" && continue - am__include=`sed -n 's/^am__include = //p' < "$mf"` - test -z "am__include" && continue - am__quote=`sed -n 's/^am__quote = //p' < "$mf"` - # When using ansi2knr, U may be empty or an underscore; expand it - U=`sed -n 's/^U = //p' < "$mf"` - # Find all dependency output files, they are included files with - # $(DEPDIR) in their names. We invoke sed twice because it is the - # simplest approach to changing $(DEPDIR) to its actual value in the - # expansion. - for file in `sed -n " - s/^$am__include $am__quote\(.*(DEPDIR).*\)$am__quote"'$/\1/p' <"$mf" | \ - sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g' -e 's/\$U/'"$U"'/g'`; do - # Make sure the directory exists. - test -f "$dirpart/$file" && continue - fdir=`$as_dirname -- "$file" || -$as_expr X"$file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ - X"$file" : 'X\(//\)[^/]' \| \ - X"$file" : 'X\(//\)$' \| \ - X"$file" : 'X\(/\)' \| . 2>/dev/null || -$as_echo X"$file" | - sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ - s//\1/ - q - } - /^X\(\/\/\)[^/].*/{ - s//\1/ - q - } - /^X\(\/\/\)$/{ - s//\1/ - q - } - /^X\(\/\).*/{ - s//\1/ - q - } - s/.*/./; q'` - as_dir=$dirpart/$fdir; as_fn_mkdir_p - # echo "creating $dirpart/$file" - echo '# dummy' > "$dirpart/$file" - done - done -} - ;; - "libtool":C) - - # See if we are running on zsh, and set the options which allow our - # commands through without removal of \ escapes. - if test -n "${ZSH_VERSION+set}" ; then - setopt NO_GLOB_SUBST - fi - - cfgfile="${ofile}T" - trap "$RM \"$cfgfile\"; exit 1" 1 2 15 - $RM "$cfgfile" - - cat <<_LT_EOF >> "$cfgfile" -#! $SHELL - -# `$ECHO "$ofile" | sed 's%^.*/%%'` - Provide generalized library-building support services. -# Generated automatically by $as_me ($PACKAGE$TIMESTAMP) $VERSION -# Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`: -# NOTE: Changes made to this file will be lost: look at ltmain.sh. -# -# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005, -# 2006, 2007, 2008 Free Software Foundation, Inc. -# Written by Gordon Matzigkeit, 1996 -# -# This file is part of GNU Libtool. -# -# GNU Libtool is free software; you can redistribute it and/or -# modify it under the terms of the GNU General Public License as -# published by the Free Software Foundation; either version 2 of -# the License, or (at your option) any later version. -# -# As a special exception to the GNU General Public License, -# if you distribute this file as part of a program or library that -# is built using GNU Libtool, you may include this file under the -# same distribution terms that you use for the rest of that program. -# -# GNU Libtool is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with GNU Libtool; see the file COPYING. If not, a copy -# can be downloaded from http://www.gnu.org/licenses/gpl.html, or -# obtained by writing to the Free Software Foundation, Inc., -# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. - - -# The names of the tagged configurations supported by this script. -available_tags="" - -# ### BEGIN LIBTOOL CONFIG - -# Which release of libtool.m4 was used? -macro_version=$macro_version -macro_revision=$macro_revision - -# Whether or not to build shared libraries. -build_libtool_libs=$enable_shared - -# Whether or not to build static libraries. -build_old_libs=$enable_static - -# What type of objects to build. -pic_mode=$pic_mode - -# Whether or not to optimize for fast installation. -fast_install=$enable_fast_install - -# The host system. -host_alias=$host_alias -host=$host -host_os=$host_os - -# The build system. -build_alias=$build_alias -build=$build -build_os=$build_os - -# A sed program that does not truncate output. -SED=$lt_SED - -# Sed that helps us avoid accidentally triggering echo(1) options like -n. -Xsed="\$SED -e 1s/^X//" - -# A grep program that handles long lines. -GREP=$lt_GREP - -# An ERE matcher. -EGREP=$lt_EGREP - -# A literal string matcher. -FGREP=$lt_FGREP - -# A BSD- or MS-compatible name lister. -NM=$lt_NM - -# Whether we need soft or hard links. -LN_S=$lt_LN_S - -# What is the maximum length of a command? -max_cmd_len=$max_cmd_len - -# Object file suffix (normally "o"). -objext=$ac_objext - -# Executable file suffix (normally ""). -exeext=$exeext - -# whether the shell understands "unset". -lt_unset=$lt_unset - -# turn spaces into newlines. -SP2NL=$lt_lt_SP2NL - -# turn newlines into spaces. -NL2SP=$lt_lt_NL2SP - -# How to create reloadable object files. -reload_flag=$lt_reload_flag -reload_cmds=$lt_reload_cmds - -# An object symbol dumper. -OBJDUMP=$lt_OBJDUMP - -# Method to check whether dependent libraries are shared objects. -deplibs_check_method=$lt_deplibs_check_method - -# Command to use when deplibs_check_method == "file_magic". -file_magic_cmd=$lt_file_magic_cmd - -# The archiver. -AR=$lt_AR -AR_FLAGS=$lt_AR_FLAGS - -# A symbol stripping program. -STRIP=$lt_STRIP - -# Commands used to install an old-style archive. -RANLIB=$lt_RANLIB -old_postinstall_cmds=$lt_old_postinstall_cmds -old_postuninstall_cmds=$lt_old_postuninstall_cmds - -# A C compiler. -LTCC=$lt_CC - -# LTCC compiler flags. -LTCFLAGS=$lt_CFLAGS - -# Take the output of nm and produce a listing of raw symbols and C names. -global_symbol_pipe=$lt_lt_cv_sys_global_symbol_pipe - -# Transform the output of nm in a proper C declaration. -global_symbol_to_cdecl=$lt_lt_cv_sys_global_symbol_to_cdecl - -# Transform the output of nm in a C name address pair. -global_symbol_to_c_name_address=$lt_lt_cv_sys_global_symbol_to_c_name_address - -# Transform the output of nm in a C name address pair when lib prefix is needed. -global_symbol_to_c_name_address_lib_prefix=$lt_lt_cv_sys_global_symbol_to_c_name_address_lib_prefix - -# The name of the directory that contains temporary libtool files. -objdir=$objdir - -# Shell to use when invoking shell scripts. -SHELL=$lt_SHELL - -# An echo program that does not interpret backslashes. -ECHO=$lt_ECHO - -# Used to examine libraries when file_magic_cmd begins with "file". -MAGIC_CMD=$MAGIC_CMD - -# Must we lock files when doing compilation? -need_locks=$lt_need_locks - -# Tool to manipulate archived DWARF debug symbol files on Mac OS X. -DSYMUTIL=$lt_DSYMUTIL - -# Tool to change global to local symbols on Mac OS X. -NMEDIT=$lt_NMEDIT - -# Tool to manipulate fat objects and archives on Mac OS X. -LIPO=$lt_LIPO - -# ldd/readelf like tool for Mach-O binaries on Mac OS X. -OTOOL=$lt_OTOOL - -# ldd/readelf like tool for 64 bit Mach-O binaries on Mac OS X 10.4. -OTOOL64=$lt_OTOOL64 - -# Old archive suffix (normally "a"). -libext=$libext - -# Shared library suffix (normally ".so"). -shrext_cmds=$lt_shrext_cmds - -# The commands to extract the exported symbol list from a shared archive. -extract_expsyms_cmds=$lt_extract_expsyms_cmds - -# Variables whose values should be saved in libtool wrapper scripts and -# restored at link time. -variables_saved_for_relink=$lt_variables_saved_for_relink - -# Do we need the "lib" prefix for modules? -need_lib_prefix=$need_lib_prefix - -# Do we need a version for libraries? -need_version=$need_version - -# Library versioning type. -version_type=$version_type - -# Shared library runtime path variable. -runpath_var=$runpath_var - -# Shared library path variable. -shlibpath_var=$shlibpath_var - -# Is shlibpath searched before the hard-coded library search path? -shlibpath_overrides_runpath=$shlibpath_overrides_runpath - -# Format of library name prefix. -libname_spec=$lt_libname_spec - -# List of archive names. First name is the real one, the rest are links. -# The last name is the one that the linker finds with -lNAME -library_names_spec=$lt_library_names_spec - -# The coded name of the library, if different from the real name. -soname_spec=$lt_soname_spec - -# Command to use after installation of a shared archive. -postinstall_cmds=$lt_postinstall_cmds - -# Command to use after uninstallation of a shared archive. -postuninstall_cmds=$lt_postuninstall_cmds - -# Commands used to finish a libtool library installation in a directory. -finish_cmds=$lt_finish_cmds - -# As "finish_cmds", except a single script fragment to be evaled but -# not shown. -finish_eval=$lt_finish_eval - -# Whether we should hardcode library paths into libraries. -hardcode_into_libs=$hardcode_into_libs - -# Compile-time system search path for libraries. -sys_lib_search_path_spec=$lt_sys_lib_search_path_spec - -# Run-time system search path for libraries. -sys_lib_dlsearch_path_spec=$lt_sys_lib_dlsearch_path_spec - -# Whether dlopen is supported. -dlopen_support=$enable_dlopen - -# Whether dlopen of programs is supported. -dlopen_self=$enable_dlopen_self - -# Whether dlopen of statically linked programs is supported. -dlopen_self_static=$enable_dlopen_self_static - -# Commands to strip libraries. -old_striplib=$lt_old_striplib -striplib=$lt_striplib - - -# The linker used to build libraries. -LD=$lt_LD - -# Commands used to build an old-style archive. -old_archive_cmds=$lt_old_archive_cmds - -# A language specific compiler. -CC=$lt_compiler - -# Is the compiler the GNU compiler? -with_gcc=$GCC - -# Compiler flag to turn off builtin functions. -no_builtin_flag=$lt_lt_prog_compiler_no_builtin_flag - -# How to pass a linker flag through the compiler. -wl=$lt_lt_prog_compiler_wl - -# Additional compiler flags for building library objects. -pic_flag=$lt_lt_prog_compiler_pic - -# Compiler flag to prevent dynamic linking. -link_static_flag=$lt_lt_prog_compiler_static - -# Does compiler simultaneously support -c and -o options? -compiler_c_o=$lt_lt_cv_prog_compiler_c_o - -# Whether or not to add -lc for building shared libraries. -build_libtool_need_lc=$archive_cmds_need_lc - -# Whether or not to disallow shared libs when runtime libs are static. -allow_libtool_libs_with_static_runtimes=$enable_shared_with_static_runtimes - -# Compiler flag to allow reflexive dlopens. -export_dynamic_flag_spec=$lt_export_dynamic_flag_spec - -# Compiler flag to generate shared objects directly from archives. -whole_archive_flag_spec=$lt_whole_archive_flag_spec - -# Whether the compiler copes with passing no objects directly. -compiler_needs_object=$lt_compiler_needs_object - -# Create an old-style archive from a shared archive. -old_archive_from_new_cmds=$lt_old_archive_from_new_cmds - -# Create a temporary old-style archive to link instead of a shared archive. -old_archive_from_expsyms_cmds=$lt_old_archive_from_expsyms_cmds - -# Commands used to build a shared archive. -archive_cmds=$lt_archive_cmds -archive_expsym_cmds=$lt_archive_expsym_cmds - -# Commands used to build a loadable module if different from building -# a shared archive. -module_cmds=$lt_module_cmds -module_expsym_cmds=$lt_module_expsym_cmds - -# Whether we are building with GNU ld or not. -with_gnu_ld=$lt_with_gnu_ld - -# Flag that allows shared libraries with undefined symbols to be built. -allow_undefined_flag=$lt_allow_undefined_flag - -# Flag that enforces no undefined symbols. -no_undefined_flag=$lt_no_undefined_flag - -# Flag to hardcode \$libdir into a binary during linking. -# This must work even if \$libdir does not exist -hardcode_libdir_flag_spec=$lt_hardcode_libdir_flag_spec - -# If ld is used when linking, flag to hardcode \$libdir into a binary -# during linking. This must work even if \$libdir does not exist. -hardcode_libdir_flag_spec_ld=$lt_hardcode_libdir_flag_spec_ld - -# Whether we need a single "-rpath" flag with a separated argument. -hardcode_libdir_separator=$lt_hardcode_libdir_separator - -# Set to "yes" if using DIR/libNAME\${shared_ext} during linking hardcodes -# DIR into the resulting binary. -hardcode_direct=$hardcode_direct - -# Set to "yes" if using DIR/libNAME\${shared_ext} during linking hardcodes -# DIR into the resulting binary and the resulting library dependency is -# "absolute",i.e impossible to change by setting \${shlibpath_var} if the -# library is relocated. -hardcode_direct_absolute=$hardcode_direct_absolute - -# Set to "yes" if using the -LDIR flag during linking hardcodes DIR -# into the resulting binary. -hardcode_minus_L=$hardcode_minus_L - -# Set to "yes" if using SHLIBPATH_VAR=DIR during linking hardcodes DIR -# into the resulting binary. -hardcode_shlibpath_var=$hardcode_shlibpath_var - -# Set to "yes" if building a shared library automatically hardcodes DIR -# into the library and all subsequent libraries and executables linked -# against it. -hardcode_automatic=$hardcode_automatic - -# Set to yes if linker adds runtime paths of dependent libraries -# to runtime path list. -inherit_rpath=$inherit_rpath - -# Whether libtool must link a program against all its dependency libraries. -link_all_deplibs=$link_all_deplibs - -# Fix the shell variable \$srcfile for the compiler. -fix_srcfile_path=$lt_fix_srcfile_path - -# Set to "yes" if exported symbols are required. -always_export_symbols=$always_export_symbols - -# The commands to list exported symbols. -export_symbols_cmds=$lt_export_symbols_cmds - -# Symbols that should not be listed in the preloaded symbols. -exclude_expsyms=$lt_exclude_expsyms - -# Symbols that must always be exported. -include_expsyms=$lt_include_expsyms - -# Commands necessary for linking programs (against libraries) with templates. -prelink_cmds=$lt_prelink_cmds - -# Specify filename containing input files. -file_list_spec=$lt_file_list_spec - -# How to hardcode a shared library path into an executable. -hardcode_action=$hardcode_action - -# ### END LIBTOOL CONFIG - -_LT_EOF - - case $host_os in - aix3*) - cat <<\_LT_EOF >> "$cfgfile" -# AIX sometimes has problems with the GCC collect2 program. For some -# reason, if we set the COLLECT_NAMES environment variable, the problems -# vanish in a puff of smoke. -if test "X${COLLECT_NAMES+set}" != Xset; then - COLLECT_NAMES= - export COLLECT_NAMES -fi -_LT_EOF - ;; - esac - - -ltmain="$ac_aux_dir/ltmain.sh" - - - # We use sed instead of cat because bash on DJGPP gets confused if - # if finds mixed CR/LF and LF-only lines. Since sed operates in - # text mode, it properly converts lines to CR/LF. This bash problem - # is reportedly fixed, but why not run on old versions too? - sed '/^# Generated shell functions inserted here/q' "$ltmain" >> "$cfgfile" \ - || (rm -f "$cfgfile"; exit 1) - - case $xsi_shell in - yes) - cat << \_LT_EOF >> "$cfgfile" - -# func_dirname file append nondir_replacement -# Compute the dirname of FILE. If nonempty, add APPEND to the result, -# otherwise set result to NONDIR_REPLACEMENT. -func_dirname () -{ - case ${1} in - */*) func_dirname_result="${1%/*}${2}" ;; - * ) func_dirname_result="${3}" ;; - esac -} - -# func_basename file -func_basename () -{ - func_basename_result="${1##*/}" -} - -# func_dirname_and_basename file append nondir_replacement -# perform func_basename and func_dirname in a single function -# call: -# dirname: Compute the dirname of FILE. If nonempty, -# add APPEND to the result, otherwise set result -# to NONDIR_REPLACEMENT. -# value returned in "$func_dirname_result" -# basename: Compute filename of FILE. -# value retuned in "$func_basename_result" -# Implementation must be kept synchronized with func_dirname -# and func_basename. For efficiency, we do not delegate to -# those functions but instead duplicate the functionality here. -func_dirname_and_basename () -{ - case ${1} in - */*) func_dirname_result="${1%/*}${2}" ;; - * ) func_dirname_result="${3}" ;; - esac - func_basename_result="${1##*/}" -} - -# func_stripname prefix suffix name -# strip PREFIX and SUFFIX off of NAME. -# PREFIX and SUFFIX must not contain globbing or regex special -# characters, hashes, percent signs, but SUFFIX may contain a leading -# dot (in which case that matches only a dot). -func_stripname () -{ - # pdksh 5.2.14 does not do ${X%$Y} correctly if both X and Y are - # positional parameters, so assign one to ordinary parameter first. - func_stripname_result=${3} - func_stripname_result=${func_stripname_result#"${1}"} - func_stripname_result=${func_stripname_result%"${2}"} -} - -# func_opt_split -func_opt_split () -{ - func_opt_split_opt=${1%%=*} - func_opt_split_arg=${1#*=} -} - -# func_lo2o object -func_lo2o () -{ - case ${1} in - *.lo) func_lo2o_result=${1%.lo}.${objext} ;; - *) func_lo2o_result=${1} ;; - esac -} - -# func_xform libobj-or-source -func_xform () -{ - func_xform_result=${1%.*}.lo -} - -# func_arith arithmetic-term... -func_arith () -{ - func_arith_result=$(( $* )) -} - -# func_len string -# STRING may not start with a hyphen. -func_len () -{ - func_len_result=${#1} -} - -_LT_EOF - ;; - *) # Bourne compatible functions. - cat << \_LT_EOF >> "$cfgfile" - -# func_dirname file append nondir_replacement -# Compute the dirname of FILE. If nonempty, add APPEND to the result, -# otherwise set result to NONDIR_REPLACEMENT. -func_dirname () -{ - # Extract subdirectory from the argument. - func_dirname_result=`$ECHO "X${1}" | $Xsed -e "$dirname"` - if test "X$func_dirname_result" = "X${1}"; then - func_dirname_result="${3}" - else - func_dirname_result="$func_dirname_result${2}" - fi -} - -# func_basename file -func_basename () -{ - func_basename_result=`$ECHO "X${1}" | $Xsed -e "$basename"` -} - - -# func_stripname prefix suffix name -# strip PREFIX and SUFFIX off of NAME. -# PREFIX and SUFFIX must not contain globbing or regex special -# characters, hashes, percent signs, but SUFFIX may contain a leading -# dot (in which case that matches only a dot). -# func_strip_suffix prefix name -func_stripname () -{ - case ${2} in - .*) func_stripname_result=`$ECHO "X${3}" \ - | $Xsed -e "s%^${1}%%" -e "s%\\\\${2}\$%%"`;; - *) func_stripname_result=`$ECHO "X${3}" \ - | $Xsed -e "s%^${1}%%" -e "s%${2}\$%%"`;; - esac -} - -# sed scripts: -my_sed_long_opt='1s/^\(-[^=]*\)=.*/\1/;q' -my_sed_long_arg='1s/^-[^=]*=//' - -# func_opt_split -func_opt_split () -{ - func_opt_split_opt=`$ECHO "X${1}" | $Xsed -e "$my_sed_long_opt"` - func_opt_split_arg=`$ECHO "X${1}" | $Xsed -e "$my_sed_long_arg"` -} - -# func_lo2o object -func_lo2o () -{ - func_lo2o_result=`$ECHO "X${1}" | $Xsed -e "$lo2o"` -} - -# func_xform libobj-or-source -func_xform () -{ - func_xform_result=`$ECHO "X${1}" | $Xsed -e 's/\.[^.]*$/.lo/'` -} - -# func_arith arithmetic-term... -func_arith () -{ - func_arith_result=`expr "$@"` -} - -# func_len string -# STRING may not start with a hyphen. -func_len () -{ - func_len_result=`expr "$1" : ".*" 2>/dev/null || echo $max_cmd_len` -} - -_LT_EOF -esac - -case $lt_shell_append in - yes) - cat << \_LT_EOF >> "$cfgfile" - -# func_append var value -# Append VALUE to the end of shell variable VAR. -func_append () -{ - eval "$1+=\$2" -} -_LT_EOF - ;; - *) - cat << \_LT_EOF >> "$cfgfile" - -# func_append var value -# Append VALUE to the end of shell variable VAR. -func_append () -{ - eval "$1=\$$1\$2" -} - -_LT_EOF - ;; - esac - - - sed -n '/^# Generated shell functions inserted here/,$p' "$ltmain" >> "$cfgfile" \ - || (rm -f "$cfgfile"; exit 1) - - mv -f "$cfgfile" "$ofile" || - (rm -f "$ofile" && cp "$cfgfile" "$ofile" && rm -f "$cfgfile") - chmod +x "$ofile" - - ;; - - esac -done # for ac_tag - - -as_fn_exit 0 -_ACEOF -ac_clean_files=$ac_clean_files_save - -test $ac_write_fail = 0 || - as_fn_error "write failure creating $CONFIG_STATUS" "$LINENO" 5 - - -# configure is writing to config.log, and then calls config.status. -# config.status does its own redirection, appending to config.log. -# Unfortunately, on DOS this fails, as config.log is still kept open -# by configure, so config.status won't be able to write to it; its -# output is simply discarded. So we exec the FD to /dev/null, -# effectively closing config.log, so it can be properly (re)opened and -# appended to by config.status. When coming back to configure, we -# need to make the FD available again. -if test "$no_create" != yes; then - ac_cs_success=: - ac_config_status_args= - test "$silent" = yes && - ac_config_status_args="$ac_config_status_args --quiet" - exec 5>/dev/null - $SHELL $CONFIG_STATUS $ac_config_status_args || ac_cs_success=false - exec 5>>config.log - # Use ||, not &&, to avoid exiting from the if with $? = 1, which - # would make configure fail if this is the last instruction. - $ac_cs_success || as_fn_exit $? -fi -if test -n "$ac_unrecognized_opts" && test "$enable_option_checking" != no; then - { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: unrecognized options: $ac_unrecognized_opts" >&5 -$as_echo "$as_me: WARNING: unrecognized options: $ac_unrecognized_opts" >&2;} -fi - diff --git a/pixman/configure.ac b/pixman/configure.ac index c89474de2..ae7b4ee15 100644 --- a/pixman/configure.ac +++ b/pixman/configure.ac @@ -1,608 +1,709 @@ -dnl Copyright 2005 Red Hat, Inc. -dnl -dnl Permission to use, copy, modify, distribute, and sell this software and its -dnl documentation for any purpose is hereby granted without fee, provided that -dnl the above copyright notice appear in all copies and that both that -dnl copyright notice and this permission notice appear in supporting -dnl documentation, and that the name of Red Hat not be used in -dnl advertising or publicity pertaining to distribution of the software without -dnl specific, written prior permission. Red Hat makes no -dnl representations about the suitability of this software for any purpose. It -dnl is provided "as is" without express or implied warranty. -dnl -dnl RED HAT DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE, -dnl INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO -dnl EVENT SHALL RED HAT BE LIABLE FOR ANY SPECIAL, INDIRECT OR -dnl CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, -dnl DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER -dnl TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR -dnl PERFORMANCE OF THIS SOFTWARE. -dnl -dnl Process this file with autoconf to create configure. - -AC_PREREQ([2.57]) - -# Pixman versioning scheme -# -# - The version in git has an odd MICRO version number -# -# - Released versions both development and stable have an even MICRO -# version number -# -# - Released development versions have an odd MINOR number -# -# - Released stable versions have an even MINOR number -# -# - Versions that break ABI must have a new MAJOR number -# -# - If you break the ABI, then at least this must be done: -# -# - increment MAJOR -# -# - In the first development release where you break ABI, find -# all instances of "pixman-n" and change them to pixman-(n+1) -# -# This needs to be done at least in -# configure.ac -# all Makefile.am's -# pixman-n.pc.in -# -# This ensures that binary incompatible versions can be installed -# in parallel. See http://www106.pair.com/rhp/parallel.html for -# more information -# - -m4_define([pixman_major], 0) -m4_define([pixman_minor], 18) -m4_define([pixman_micro], 2) - -m4_define([pixman_version],[pixman_major.pixman_minor.pixman_micro]) - -AC_INIT(pixman, pixman_version, "pixman@lists.freedesktop.org", pixman) -AM_INIT_AUTOMAKE([foreign dist-bzip2]) - -# Suppress verbose compile lines -m4_ifdef([AM_SILENT_RULES], [AM_SILENT_RULES([yes])]) - -AM_CONFIG_HEADER(config.h) - -AC_CANONICAL_HOST - -test_CFLAGS=${CFLAGS+set} # We may override autoconf default CFLAGS. - -AC_PROG_CC -AM_PROG_AS -AC_PROG_LIBTOOL -AC_CHECK_FUNCS([getisax]) -AC_C_BIGENDIAN -AC_C_INLINE - -AC_CHECK_SIZEOF(long) - -# Checks for Sun Studio compilers -AC_CHECK_DECL([__SUNPRO_C], [SUNCC="yes"], [SUNCC="no"]) -AC_CHECK_DECL([__amd64], [AMD64_ABI="yes"], [AMD64_ABI="no"]) - -# Default CFLAGS to -O -g rather than just the -g from AC_PROG_CC -# if we're using Sun Studio and neither the user nor a config.site -# has set CFLAGS. -if test $SUNCC = yes && \ - test "$test_CFLAGS" == "" && \ - test "$CFLAGS" = "-g" -then - CFLAGS="-O -g" -fi - -# -# We ignore pixman_major in the version here because the major version should -# always be encoded in the actual library name. Ie., the soname is: -# -# pixman-$(pixman_major).0.minor.micro -# -m4_define([lt_current], [pixman_minor]) -m4_define([lt_revision], [pixman_micro]) -m4_define([lt_age], [pixman_minor]) - -LT_VERSION_INFO="lt_current:lt_revision:lt_age" - -PIXMAN_VERSION_MAJOR=pixman_major() -AC_SUBST(PIXMAN_VERSION_MAJOR) -PIXMAN_VERSION_MINOR=pixman_minor() -AC_SUBST(PIXMAN_VERSION_MINOR) -PIXMAN_VERSION_MICRO=pixman_micro() -AC_SUBST(PIXMAN_VERSION_MICRO) - -AC_SUBST(LT_VERSION_INFO) - -# Check for dependencies -#PKG_CHECK_MODULES(DEP, x11) - -changequote(,)dnl -if test "x$GCC" = "xyes"; then - - case " $CFLAGS " in - *[\ \ ]-Wall[\ \ ]*) ;; - *) CFLAGS="$CFLAGS -Wall" ;; - esac - - case " $CFLAGS " in - *[\ \ ]-fno-strict-aliasing[\ \ ]*) ;; - *) CFLAGS="$CFLAGS -fno-strict-aliasing" ;; - esac - -fi changequote([,])dnl - -AC_PATH_PROG(PERL, perl, no) -if test "x$PERL" = xno; then - AC_MSG_ERROR([Perl is required to build pixman.]) -fi -AC_SUBST(PERL) - -dnl ========================================================================= -dnl -fvisibility stuff - -have_gcc4=no -AC_MSG_CHECKING(for -fvisibility) -AC_COMPILE_IFELSE([ -#if defined(__GNUC__) && (__GNUC__ >= 4) -#else -error Need GCC 4.0 for visibility -#endif -int main () { return 0; } -], have_gcc4=yes) - -if test "x$have_gcc4" = "xyes"; then - CFLAGS="$CFLAGS -fvisibility=hidden" -fi -AC_MSG_RESULT($have_gcc4) - -have_sunstudio8=no -AC_MSG_CHECKING([for -xldscope (Sun compilers)]) -AC_COMPILE_IFELSE([ -#if defined(__SUNPRO_C) && (__SUNPRO_C >= 0x550) -#else -error Need Sun Studio 8 for visibility -#endif -int main () { return 0; } -], have_sunstudio8=yes) - -if test "x$have_sunstudio8" = "xyes"; then - CFLAGS="$CFLAGS -xldscope=hidden" -fi -AC_MSG_RESULT($have_sunstudio8) - -dnl =========================================================================== -dnl Check for MMX - -if test "x$MMX_CFLAGS" = "x" ; then - if test "x$SUNCC" = "xyes"; then - # Sun Studio doesn't have an -xarch=mmx flag, so we have to use sse - # but if we're building 64-bit, mmx & sse support is on by default and - # -xarch=sse throws an error instead - if test "$AMD64_ABI" = "no" ; then - MMX_CFLAGS="-xarch=sse" - fi - else - MMX_CFLAGS="-mmmx -Winline" - fi -fi - -have_mmx_intrinsics=no -AC_MSG_CHECKING(whether to use MMX intrinsics) -xserver_save_CFLAGS=$CFLAGS -CFLAGS="$MMX_CFLAGS $CFLAGS" -AC_COMPILE_IFELSE([ -#if defined(__GNUC__) && (__GNUC__ < 3 || (__GNUC__ == 3 && __GNUC_MINOR__ < 4)) -error "Need GCC >= 3.4 for MMX intrinsics" -#endif -#include <mmintrin.h> -int main () { - __m64 v = _mm_cvtsi32_si64 (1); - return _mm_cvtsi64_si32 (v); -}], have_mmx_intrinsics=yes) -CFLAGS=$xserver_save_CFLAGS - -AC_ARG_ENABLE(mmx, - [AC_HELP_STRING([--disable-mmx], - [disable MMX fast paths])], - [enable_mmx=$enableval], [enable_mmx=auto]) - -if test $enable_mmx = no ; then - have_mmx_intrinsics=disabled -fi - -if test $have_mmx_intrinsics = yes ; then - AC_DEFINE(USE_MMX, 1, [use MMX compiler intrinsics]) -else - MMX_CFLAGS= -fi - -AC_MSG_RESULT($have_mmx_intrinsics) -if test $enable_mmx = yes && test $have_mmx_intrinsics = no ; then - AC_MSG_ERROR([MMX intrinsics not detected]) -fi - -AM_CONDITIONAL(USE_MMX, test $have_mmx_intrinsics = yes) - -dnl =========================================================================== -dnl Check for SSE2 - -if test "x$SSE2_CFLAGS" = "x" ; then - if test "x$SUNCC" = "xyes"; then - # SSE2 is enabled by default in the Sun Studio 64-bit environment - if test "$AMD64_ABI" = "no" ; then - SSE2_CFLAGS="-xarch=sse2" - fi - else - SSE2_CFLAGS="-mmmx -msse2 -Winline" - fi -fi - -have_sse2_intrinsics=no -AC_MSG_CHECKING(whether to use SSE2 intrinsics) -xserver_save_CFLAGS=$CFLAGS -CFLAGS="$SSE2_CFLAGS $CFLAGS" - -AC_COMPILE_IFELSE([ -#if defined(__GNUC__) && (__GNUC__ < 4 || (__GNUC__ == 4 && __GNUC_MINOR__ < 2)) -# if !defined(__amd64__) && !defined(__x86_64__) -# error "Need GCC >= 4.2 for SSE2 intrinsics on x86" -# endif -#endif -#include <mmintrin.h> -#include <xmmintrin.h> -#include <emmintrin.h> -int main () { - __m128i a = _mm_set1_epi32 (0), b = _mm_set1_epi32 (0), c; - c = _mm_xor_si128 (a, b); - return 0; -}], have_sse2_intrinsics=yes) -CFLAGS=$xserver_save_CFLAGS - -AC_ARG_ENABLE(sse2, - [AC_HELP_STRING([--disable-sse2], - [disable SSE2 fast paths])], - [enable_sse2=$enableval], [enable_sse2=auto]) - -if test $enable_sse2 = no ; then - have_sse2_intrinsics=disabled -fi - -if test $have_sse2_intrinsics = yes ; then - AC_DEFINE(USE_SSE2, 1, [use SSE2 compiler intrinsics]) -fi - -AC_MSG_RESULT($have_sse2_intrinsics) -if test $enable_sse2 = yes && test $have_sse2_intrinsics = no ; then - AC_MSG_ERROR([SSE2 intrinsics not detected]) -fi - -AM_CONDITIONAL(USE_SSE2, test $have_sse2_intrinsics = yes) - -dnl =========================================================================== -dnl Other special flags needed when building code using MMX or SSE instructions -case $host_os in - solaris*) - # When building 32-bit binaries, apply a mapfile to ensure that the - # binaries aren't flagged as only able to run on MMX+SSE capable CPUs - # since they check at runtime before using those instructions. - # Not all linkers grok the mapfile format so we check for that first. - if test "$AMD64_ABI" = "no" ; then - use_hwcap_mapfile=no - AC_MSG_CHECKING(whether to use a hardware capability map file) - hwcap_save_LDFLAGS="$LDFLAGS" - HWCAP_LDFLAGS='-Wl,-M,$(srcdir)/solaris-hwcap.mapfile' - LDFLAGS="$LDFLAGS -Wl,-M,pixman/solaris-hwcap.mapfile" - AC_LINK_IFELSE([int main() { return 0; }], - use_hwcap_mapfile=yes, - HWCAP_LDFLAGS="") - LDFLAGS="$hwcap_save_LDFLAGS" - AC_MSG_RESULT($use_hwcap_mapfile) - fi - if test "x$MMX_LDFLAGS" = "x" ; then - MMX_LDFLAGS="$HWCAP_LDFLAGS" - fi - if test "x$SSE2_LDFLAGS" = "x" ; then - SSE2_LDFLAGS="$HWCAP_LDFLAGS" - fi - ;; -esac - -AC_SUBST(MMX_CFLAGS) -AC_SUBST(MMX_LDFLAGS) -AC_SUBST(SSE2_CFLAGS) -AC_SUBST(SSE2_LDFLAGS) - -dnl =========================================================================== -dnl Check for VMX/Altivec -if test -n "`$CC -v 2>&1 | grep version | grep Apple`"; then - VMX_CFLAGS="-faltivec" -else - VMX_CFLAGS="-maltivec -mabi=altivec" -fi - -have_vmx_intrinsics=no -AC_MSG_CHECKING(whether to use VMX/Altivec intrinsics) -xserver_save_CFLAGS=$CFLAGS -CFLAGS="$VMX_CFLAGS $CFLAGS" -AC_COMPILE_IFELSE([ -#if defined(__GNUC__) && (__GNUC__ < 3 || (__GNUC__ == 3 && __GNUC_MINOR__ < 4)) -error "Need GCC >= 3.4 for sane altivec support" -#endif -#include <altivec.h> -int main () { - vector unsigned int v = vec_splat_u32 (1); - v = vec_sub (v, v); - return 0; -}], have_vmx_intrinsics=yes) -CFLAGS=$xserver_save_CFLAGS - -AC_ARG_ENABLE(vmx, - [AC_HELP_STRING([--disable-vmx], - [disable VMX fast paths])], - [enable_vmx=$enableval], [enable_vmx=auto]) - -if test $enable_vmx = no ; then - have_vmx_intrinsics=disabled -fi - -if test $have_vmx_intrinsics = yes ; then - AC_DEFINE(USE_VMX, 1, [use VMX compiler intrinsics]) -else - VMX_CFLAGS= -fi - -AC_MSG_RESULT($have_vmx_intrinsics) -if test $enable_vmx = yes && test $have_vmx_intrinsics = no ; then - AC_MSG_ERROR([VMX intrinsics not detected]) -fi - -AC_SUBST(VMX_CFLAGS) - -AM_CONDITIONAL(USE_VMX, test $have_vmx_intrinsics = yes) - -dnl ========================================================================== -dnl Check if assembler is gas compatible and supports ARM SIMD instructions -have_arm_simd=no -AC_MSG_CHECKING(whether to use ARM SIMD assembler) -xserver_save_CFLAGS=$CFLAGS -CFLAGS="-x assembler-with-cpp $CFLAGS" -AC_COMPILE_IFELSE([[ -.text -.arch armv6 -.object_arch armv4 -.arm -.altmacro -#ifndef __ARM_EABI__ -#error EABI is required (to be sure that calling conventions are compatible) -#endif -pld [r0] -uqadd8 r0, r0, r0]], have_arm_simd=yes) -CFLAGS=$xserver_save_CFLAGS - -AC_ARG_ENABLE(arm-simd, - [AC_HELP_STRING([--disable-arm-simd], - [disable ARM SIMD fast paths])], - [enable_arm_simd=$enableval], [enable_arm_simd=auto]) - -if test $enable_arm_simd = no ; then - have_arm_simd=disabled -fi - -if test $have_arm_simd = yes ; then - AC_DEFINE(USE_ARM_SIMD, 1, [use ARM SIMD assembly optimizations]) -fi - -AM_CONDITIONAL(USE_ARM_SIMD, test $have_arm_simd = yes) - -AC_MSG_RESULT($have_arm_simd) -if test $enable_arm_simd = yes && test $have_arm_simd = no ; then - AC_MSG_ERROR([ARM SIMD intrinsics not detected]) -fi - -dnl ========================================================================== -dnl Check if assembler is gas compatible and supports NEON instructions -have_arm_neon=no -AC_MSG_CHECKING(whether to use ARM NEON assembler) -xserver_save_CFLAGS=$CFLAGS -CFLAGS="-x assembler-with-cpp $CFLAGS" -AC_COMPILE_IFELSE([[ -.text -.fpu neon -.arch armv7a -.object_arch armv4 -.eabi_attribute 10, 0 -.arm -.altmacro -#ifndef __ARM_EABI__ -#error EABI is required (to be sure that calling conventions are compatible) -#endif -pld [r0] -vmovn.u16 d0, q0]], have_arm_neon=yes) -CFLAGS=$xserver_save_CFLAGS - -AC_ARG_ENABLE(arm-neon, - [AC_HELP_STRING([--disable-arm-neon], - [disable ARM NEON fast paths])], - [enable_arm_neon=$enableval], [enable_arm_neon=auto]) - -if test $enable_arm_neon = no ; then - have_arm_neon=disabled -fi - -if test $have_arm_neon = yes ; then - AC_DEFINE(USE_ARM_NEON, 1, [use ARM NEON assembly optimizations]) -fi - -AM_CONDITIONAL(USE_ARM_NEON, test $have_arm_neon = yes) - -AC_MSG_RESULT($have_arm_neon) -if test $enable_arm_neon = yes && test $have_arm_neon = no ; then - AC_MSG_ERROR([ARM NEON intrinsics not detected]) -fi - -dnl ========================================================================================= -dnl Check for GNU-style inline assembly support - -have_gcc_inline_asm=no -AC_MSG_CHECKING(whether to use GNU-style inline assembler) -AC_COMPILE_IFELSE([ -int main () { - /* Most modern architectures have a NOP instruction, so this is a fairly generic test. */ - asm volatile ( "\tnop\n" : : : "cc", "memory" ); - return 0; -}], have_gcc_inline_asm=yes) - -AC_ARG_ENABLE(gcc-inline-asm, - [AC_HELP_STRING([--disable-gcc-inline-asm], - [disable GNU-style inline assembler])], - [enable_gcc_inline_asm=$enableval], [enable_gcc_inline_asm=auto]) - -if test $enable_gcc_inline_asm = no ; then - have_gcc_inline_asm=disabled -fi - -if test $have_gcc_inline_asm = yes ; then - AC_DEFINE(USE_GCC_INLINE_ASM, 1, [use GNU-style inline assembler]) -fi - -AC_MSG_RESULT($have_gcc_inline_asm) -if test $enable_gcc_inline_asm = yes && test $have_gcc_inline_asm = no ; then - AC_MSG_ERROR([GNU-style inline assembler not detected]) -fi - -AM_CONDITIONAL(USE_GCC_INLINE_ASM, test $have_gcc_inline_asm = yes) - -dnl ============================================== -dnl Timers - -AC_ARG_ENABLE(timers, - [AC_HELP_STRING([--enable-timers], - [enable TIMER_BEGIN and TIMER_END macros [default=no]])], - [enable_timers=$enableval], [enable_timers=no]) - -if test $enable_timers = yes ; then - AC_DEFINE(PIXMAN_TIMERS, 1, [enable TIMER_BEGIN/TIMER_END macros]) -fi -AC_SUBST(PIXMAN_TIMERS) - -dnl =================================== -dnl GTK+ - -AC_ARG_ENABLE(gtk, - [AC_HELP_STRING([--enable-gtk], - [enable tests using GTK+ [default=auto]])], - [enable_gtk=$enableval], [enable_gtk=auto]) - -PKG_PROG_PKG_CONFIG -if test $enable_gtk = auto ; then - PKG_CHECK_EXISTS([gtk+-2.0], [enable_gtk=yes], [enable_gtk=no]) -fi -if test $enable_gtk = yes ; then - PKG_CHECK_MODULES(GTK, [gtk+-2.0]) -fi - -AM_CONDITIONAL(HAVE_GTK, [test "x$enable_gtk" = xyes]) - -AC_SUBST(GTK_CFLAGS) -AC_SUBST(GTK_LIBS) -AC_SUBST(DEP_CFLAGS) -AC_SUBST(DEP_LIBS) - -dnl ===================================== -dnl posix_memalign - -AC_CHECK_FUNC(posix_memalign, have_posix_memalign=yes, have_posix_memalign=no) -if test x$have_posix_memalign = xyes; then - AC_DEFINE(HAVE_POSIX_MEMALIGN, 1, [Whether we have posix_memalign()]) -fi - -dnl ===================================== -dnl Thread local storage - -support_for__thread=no - -AC_MSG_CHECKING(for __thread) -AC_COMPILE_IFELSE([ -#ifdef __MINGW32__ -#error MinGW has broken __thread support -#endif -__thread int x ; -int main () { return 0; } -], support_for__thread=yes) - -if test $support_for__thread = yes; then - AC_DEFINE([TOOLCHAIN_SUPPORTS__THREAD],[],[Whether the tool chain supports __thread]) -fi - -AC_MSG_RESULT($support_for__thread) - -dnl posix tls - -if test $support_for__thread = no; then - -support_for_pthread_setspecific=no - -AC_MSG_CHECKING(for pthread_setspecific) - -save_LDFLAGS=$LDFLAGS - -LDFLAGS="-pthread" - -AC_LINK_IFELSE([ -#include <pthread.h> - -#include <stdlib.h> -#include <pthread.h> - -static pthread_once_t once_control = PTHREAD_ONCE_INIT; -static pthread_key_t key; - -static void -make_key (void) -{ - pthread_key_create (&key, NULL); -} - -int -main () -{ - void *value = NULL; - - if (pthread_once (&once_control, make_key) != 0) - { - value = NULL; - } - else - { - value = pthread_getspecific (key); - if (!value) - { - value = malloc (100); - pthread_setspecific (key, value); - } - } -} -], support_for_pthread_setspecific=yes); - -LDFLAGS=$save_LDFLAGS - -if test $support_for_pthread_setspecific = yes; then - PTHREAD_LDFLAGS="-pthread" - AC_DEFINE([HAVE_PTHREAD_SETSPECIFIC], [], [Whether pthread_setspecific() is supported]) -fi - -AC_MSG_RESULT($support_for_pthread_setspecific); - -fi - -AC_SUBST(TOOLCHAIN_SUPPORTS__THREAD) -AC_SUBST(HAVE_PTHREAD_SETSPECIFIC) -AC_SUBST(PTHREAD_LDFLAGS) - -AC_OUTPUT([pixman-1.pc - pixman-1-uninstalled.pc - Makefile - pixman/Makefile - pixman/pixman-version.h - test/Makefile]) +dnl Copyright 2005 Red Hat, Inc.
+dnl
+dnl Permission to use, copy, modify, distribute, and sell this software and its
+dnl documentation for any purpose is hereby granted without fee, provided that
+dnl the above copyright notice appear in all copies and that both that
+dnl copyright notice and this permission notice appear in supporting
+dnl documentation, and that the name of Red Hat not be used in
+dnl advertising or publicity pertaining to distribution of the software without
+dnl specific, written prior permission. Red Hat makes no
+dnl representations about the suitability of this software for any purpose. It
+dnl is provided "as is" without express or implied warranty.
+dnl
+dnl RED HAT DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE,
+dnl INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO
+dnl EVENT SHALL RED HAT BE LIABLE FOR ANY SPECIAL, INDIRECT OR
+dnl CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE,
+dnl DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER
+dnl TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
+dnl PERFORMANCE OF THIS SOFTWARE.
+dnl
+dnl Process this file with autoconf to create configure.
+
+AC_PREREQ([2.57])
+
+# Pixman versioning scheme
+#
+# - The version in git has an odd MICRO version number
+#
+# - Released versions both development and stable have an even MICRO
+# version number
+#
+# - Released development versions have an odd MINOR number
+#
+# - Released stable versions have an even MINOR number
+#
+# - Versions that break ABI must have a new MAJOR number
+#
+# - If you break the ABI, then at least this must be done:
+#
+# - increment MAJOR
+#
+# - In the first development release where you break ABI, find
+# all instances of "pixman-n" and change them to pixman-(n+1)
+#
+# This needs to be done at least in
+# configure.ac
+# all Makefile.am's
+# pixman-n.pc.in
+#
+# This ensures that binary incompatible versions can be installed
+# in parallel. See http://www106.pair.com/rhp/parallel.html for
+# more information
+#
+
+m4_define([pixman_major], 0)
+m4_define([pixman_minor], 19)
+m4_define([pixman_micro], 1)
+
+m4_define([pixman_version],[pixman_major.pixman_minor.pixman_micro])
+
+AC_INIT(pixman, pixman_version, "pixman@lists.freedesktop.org", pixman)
+AM_INIT_AUTOMAKE([foreign dist-bzip2])
+
+# Suppress verbose compile lines
+m4_ifdef([AM_SILENT_RULES], [AM_SILENT_RULES([yes])])
+
+AM_CONFIG_HEADER(config.h)
+
+AC_CANONICAL_HOST
+
+test_CFLAGS=${CFLAGS+set} # We may override autoconf default CFLAGS.
+
+AC_PROG_CC
+AM_PROG_AS
+AC_PROG_LIBTOOL
+AC_CHECK_FUNCS([getisax])
+AC_C_BIGENDIAN
+AC_C_INLINE
+
+dnl PIXMAN_LINK_WITH_ENV(env-setup, program, true-action, false-action)
+dnl
+dnl Compiles and links the given program in the environment setup by env-setup
+dnl and executes true-action on success and false-action on failure.
+AC_DEFUN([PIXMAN_LINK_WITH_ENV],[dnl
+ save_CFLAGS="$CFLAGS"
+ save_LDFLAGS="$LDFLAGS"
+ save_LIBS="$LIBS"
+ CFLAGS=""
+ LDFLAGS=""
+ LIBS=""
+ $1
+ AC_LINK_IFELSE(
+ [$2],
+ [pixman_cc_stderr=`test -f conftest.err && cat conftest.err`
+ pixman_cc_flag=yes],
+ [pixman_cc_stderr=`test -f conftest.err && cat conftest.err`
+ pixman_cc_flag=no])
+
+ if test "x$pixman_cc_stderr" != "x"; then
+ pixman_cc_flag=no
+ fi
+
+ if test "x$pixman_cc_flag" = "xyes"; then
+ ifelse([$3], , :, [$3])
+ else
+ ifelse([$4], , :, [$4])
+ fi
+ CFLAGS="$save_CFLAGS"
+ LDFLAGS="$save_LDFLAGS"
+ LIBS="$save_LIBS"
+])
+
+dnl Find a -Werror for catching warnings.
+WERROR=
+for w in -Werror -errwarn; do
+ if test "z$WERROR" = "z"; then
+ AC_MSG_CHECKING([whether the compiler supports $w])
+ PIXMAN_LINK_WITH_ENV(
+ [CFLAGS=$w],
+ [int main(int c, char **v) { (void)c; (void)v; return 0; }],
+ [WERROR=$w; yesno=yes], [yesno=no])
+ AC_MSG_RESULT($_yesno)
+ fi
+done
+
+dnl PIXMAN_CHECK_CFLAG(flag, [program])
+dnl Adds flag to CFLAGS if the given program links without warnings or errors.
+AC_DEFUN([PIXMAN_CHECK_CFLAG], [dnl
+ AC_MSG_CHECKING([whether the compiler supports $1])
+ PIXMAN_LINK_WITH_ENV(
+ [CFLAGS="$WERROR $1"],
+ [$2
+ int main(int c, char **v) { (void)c; (void)v; return 0; }
+ ],
+ [_yesno=yes],
+ [_yesno=no])
+ if test "x$_yesno" = xyes; then
+ CFLAGS="$CFLAGS $1"
+ fi
+ AC_MSG_RESULT($_yesno)
+])
+
+AC_CHECK_SIZEOF(long)
+
+# Checks for Sun Studio compilers
+AC_CHECK_DECL([__SUNPRO_C], [SUNCC="yes"], [SUNCC="no"])
+AC_CHECK_DECL([__amd64], [AMD64_ABI="yes"], [AMD64_ABI="no"])
+
+# Default CFLAGS to -O -g rather than just the -g from AC_PROG_CC
+# if we're using Sun Studio and neither the user nor a config.site
+# has set CFLAGS.
+if test $SUNCC = yes && \
+ test "$test_CFLAGS" == "" && \
+ test "$CFLAGS" = "-g"
+then
+ CFLAGS="-O -g"
+fi
+
+#
+# We ignore pixman_major in the version here because the major version should
+# always be encoded in the actual library name. Ie., the soname is:
+#
+# pixman-$(pixman_major).0.minor.micro
+#
+m4_define([lt_current], [pixman_minor])
+m4_define([lt_revision], [pixman_micro])
+m4_define([lt_age], [pixman_minor])
+
+LT_VERSION_INFO="lt_current:lt_revision:lt_age"
+
+PIXMAN_VERSION_MAJOR=pixman_major()
+AC_SUBST(PIXMAN_VERSION_MAJOR)
+PIXMAN_VERSION_MINOR=pixman_minor()
+AC_SUBST(PIXMAN_VERSION_MINOR)
+PIXMAN_VERSION_MICRO=pixman_micro()
+AC_SUBST(PIXMAN_VERSION_MICRO)
+
+AC_SUBST(LT_VERSION_INFO)
+
+# Check for dependencies
+#PKG_CHECK_MODULES(DEP, x11)
+
+PIXMAN_CHECK_CFLAG([-Wall])
+PIXMAN_CHECK_CFLAG([-fno-strict-aliasing])
+
+AC_PATH_PROG(PERL, perl, no)
+if test "x$PERL" = xno; then
+ AC_MSG_ERROR([Perl is required to build pixman.])
+fi
+AC_SUBST(PERL)
+
+dnl =========================================================================
+dnl OpenMP for the test suite?
+dnl
+
+# Check for OpenMP support (only supported by autoconf >=2.62)
+OPENMP_CFLAGS=
+m4_ifdef([AC_OPENMP], [AC_OPENMP])
+
+m4_define([openmp_test_program],[dnl
+#include <stdio.h>
+
+extern unsigned int lcg_seed;
+#pragma omp threadprivate(lcg_seed)
+unsigned int lcg_seed;
+
+unsigned function(unsigned a, unsigned b)
+{
+ lcg_seed ^= b;
+ return ((a + b) ^ a ) + lcg_seed;
+}
+
+int main(int argc, char **argv)
+{
+ int i;
+ int n1 = 0, n2 = argc;
+ unsigned checksum = 0;
+ int verbose = argv != NULL;
+ unsigned (*test_function)(unsigned, unsigned);
+ test_function = function;
+ #pragma omp parallel for reduction(+:checksum) default(none) \
+ shared(n1, n2, test_function, verbose)
+ for (i = n1; i < n2; i++)
+ {
+ unsigned crc = test_function (i, 0);
+ if (verbose)
+ printf ("%d: %08X\n", i, crc);
+ checksum += crc;
+ }
+ printf("%u\n", checksum);
+ return 0;
+}
+])
+
+PIXMAN_LINK_WITH_ENV(
+ [CFLAGS="$OPENMP_CFLAGS" LDFLAGS="$OPENMP_CFLAGS"],
+ [openmp_test_program],
+ [have_openmp=yes],
+ [have_openmp=no])
+if test "x$have_openmp" = "xyes"; then
+ AC_DEFINE(USE_OPENMP, 1, [use OpenMP in the test suite])
+else
+ OPENMP_CFLAGS=""
+fi
+AC_SUBST(OPENMP_CFLAGS)
+
+dnl =========================================================================
+dnl -fvisibility stuff
+
+PIXMAN_CHECK_CFLAG([-fvisibility=hidden], [dnl
+#if defined(__GNUC__) && (__GNUC__ >= 4)
+#else
+error Need GCC 4.0 for visibility
+#endif
+])
+
+PIXMAN_CHECK_CFLAG([-xldscope=hidden], [dnl
+#if defined(__SUNPRO_C) && (__SUNPRO_C >= 0x550)
+#else
+error Need Sun Studio 8 for visibility
+#endif
+])
+
+dnl ===========================================================================
+dnl Check for MMX
+
+if test "x$MMX_CFLAGS" = "x" ; then
+ if test "x$SUNCC" = "xyes"; then
+ # Sun Studio doesn't have an -xarch=mmx flag, so we have to use sse
+ # but if we're building 64-bit, mmx & sse support is on by default and
+ # -xarch=sse throws an error instead
+ if test "$AMD64_ABI" = "no" ; then
+ MMX_CFLAGS="-xarch=sse"
+ fi
+ else
+ MMX_CFLAGS="-mmmx -Winline"
+ fi
+fi
+
+have_mmx_intrinsics=no
+AC_MSG_CHECKING(whether to use MMX intrinsics)
+xserver_save_CFLAGS=$CFLAGS
+CFLAGS="$MMX_CFLAGS $CFLAGS"
+AC_COMPILE_IFELSE([
+#if defined(__GNUC__) && (__GNUC__ < 3 || (__GNUC__ == 3 && __GNUC_MINOR__ < 4))
+error "Need GCC >= 3.4 for MMX intrinsics"
+#endif
+#include <mmintrin.h>
+int main () {
+ __m64 v = _mm_cvtsi32_si64 (1);
+ return _mm_cvtsi64_si32 (v);
+}], have_mmx_intrinsics=yes)
+CFLAGS=$xserver_save_CFLAGS
+
+AC_ARG_ENABLE(mmx,
+ [AC_HELP_STRING([--disable-mmx],
+ [disable MMX fast paths])],
+ [enable_mmx=$enableval], [enable_mmx=auto])
+
+if test $enable_mmx = no ; then
+ have_mmx_intrinsics=disabled
+fi
+
+if test $have_mmx_intrinsics = yes ; then
+ AC_DEFINE(USE_MMX, 1, [use MMX compiler intrinsics])
+else
+ MMX_CFLAGS=
+fi
+
+AC_MSG_RESULT($have_mmx_intrinsics)
+if test $enable_mmx = yes && test $have_mmx_intrinsics = no ; then
+ AC_MSG_ERROR([MMX intrinsics not detected])
+fi
+
+AM_CONDITIONAL(USE_MMX, test $have_mmx_intrinsics = yes)
+
+dnl ===========================================================================
+dnl Check for SSE2
+
+if test "x$SSE2_CFLAGS" = "x" ; then
+ if test "x$SUNCC" = "xyes"; then
+ # SSE2 is enabled by default in the Sun Studio 64-bit environment
+ if test "$AMD64_ABI" = "no" ; then
+ SSE2_CFLAGS="-xarch=sse2"
+ fi
+ else
+ SSE2_CFLAGS="-mmmx -msse2 -Winline"
+ fi
+fi
+
+have_sse2_intrinsics=no
+AC_MSG_CHECKING(whether to use SSE2 intrinsics)
+xserver_save_CFLAGS=$CFLAGS
+CFLAGS="$SSE2_CFLAGS $CFLAGS"
+
+AC_COMPILE_IFELSE([
+#if defined(__GNUC__) && (__GNUC__ < 4 || (__GNUC__ == 4 && __GNUC_MINOR__ < 2))
+# if !defined(__amd64__) && !defined(__x86_64__)
+# error "Need GCC >= 4.2 for SSE2 intrinsics on x86"
+# endif
+#endif
+#include <mmintrin.h>
+#include <xmmintrin.h>
+#include <emmintrin.h>
+int main () {
+ __m128i a = _mm_set1_epi32 (0), b = _mm_set1_epi32 (0), c;
+ c = _mm_xor_si128 (a, b);
+ return 0;
+}], have_sse2_intrinsics=yes)
+CFLAGS=$xserver_save_CFLAGS
+
+AC_ARG_ENABLE(sse2,
+ [AC_HELP_STRING([--disable-sse2],
+ [disable SSE2 fast paths])],
+ [enable_sse2=$enableval], [enable_sse2=auto])
+
+if test $enable_sse2 = no ; then
+ have_sse2_intrinsics=disabled
+fi
+
+if test $have_sse2_intrinsics = yes ; then
+ AC_DEFINE(USE_SSE2, 1, [use SSE2 compiler intrinsics])
+fi
+
+AC_MSG_RESULT($have_sse2_intrinsics)
+if test $enable_sse2 = yes && test $have_sse2_intrinsics = no ; then
+ AC_MSG_ERROR([SSE2 intrinsics not detected])
+fi
+
+AM_CONDITIONAL(USE_SSE2, test $have_sse2_intrinsics = yes)
+
+dnl ===========================================================================
+dnl Other special flags needed when building code using MMX or SSE instructions
+case $host_os in
+ solaris*)
+ # When building 32-bit binaries, apply a mapfile to ensure that the
+ # binaries aren't flagged as only able to run on MMX+SSE capable CPUs
+ # since they check at runtime before using those instructions.
+ # Not all linkers grok the mapfile format so we check for that first.
+ if test "$AMD64_ABI" = "no" ; then
+ use_hwcap_mapfile=no
+ AC_MSG_CHECKING(whether to use a hardware capability map file)
+ hwcap_save_LDFLAGS="$LDFLAGS"
+ HWCAP_LDFLAGS='-Wl,-M,$(srcdir)/solaris-hwcap.mapfile'
+ LDFLAGS="$LDFLAGS -Wl,-M,pixman/solaris-hwcap.mapfile"
+ AC_LINK_IFELSE([int main() { return 0; }],
+ use_hwcap_mapfile=yes,
+ HWCAP_LDFLAGS="")
+ LDFLAGS="$hwcap_save_LDFLAGS"
+ AC_MSG_RESULT($use_hwcap_mapfile)
+ fi
+ if test "x$MMX_LDFLAGS" = "x" ; then
+ MMX_LDFLAGS="$HWCAP_LDFLAGS"
+ fi
+ if test "x$SSE2_LDFLAGS" = "x" ; then
+ SSE2_LDFLAGS="$HWCAP_LDFLAGS"
+ fi
+ ;;
+esac
+
+AC_SUBST(MMX_CFLAGS)
+AC_SUBST(MMX_LDFLAGS)
+AC_SUBST(SSE2_CFLAGS)
+AC_SUBST(SSE2_LDFLAGS)
+
+dnl ===========================================================================
+dnl Check for VMX/Altivec
+if test -n "`$CC -v 2>&1 | grep version | grep Apple`"; then
+ VMX_CFLAGS="-faltivec"
+else
+ VMX_CFLAGS="-maltivec -mabi=altivec"
+fi
+
+have_vmx_intrinsics=no
+AC_MSG_CHECKING(whether to use VMX/Altivec intrinsics)
+xserver_save_CFLAGS=$CFLAGS
+CFLAGS="$VMX_CFLAGS $CFLAGS"
+AC_COMPILE_IFELSE([
+#if defined(__GNUC__) && (__GNUC__ < 3 || (__GNUC__ == 3 && __GNUC_MINOR__ < 4))
+error "Need GCC >= 3.4 for sane altivec support"
+#endif
+#include <altivec.h>
+int main () {
+ vector unsigned int v = vec_splat_u32 (1);
+ v = vec_sub (v, v);
+ return 0;
+}], have_vmx_intrinsics=yes)
+CFLAGS=$xserver_save_CFLAGS
+
+AC_ARG_ENABLE(vmx,
+ [AC_HELP_STRING([--disable-vmx],
+ [disable VMX fast paths])],
+ [enable_vmx=$enableval], [enable_vmx=auto])
+
+if test $enable_vmx = no ; then
+ have_vmx_intrinsics=disabled
+fi
+
+if test $have_vmx_intrinsics = yes ; then
+ AC_DEFINE(USE_VMX, 1, [use VMX compiler intrinsics])
+else
+ VMX_CFLAGS=
+fi
+
+AC_MSG_RESULT($have_vmx_intrinsics)
+if test $enable_vmx = yes && test $have_vmx_intrinsics = no ; then
+ AC_MSG_ERROR([VMX intrinsics not detected])
+fi
+
+AC_SUBST(VMX_CFLAGS)
+
+AM_CONDITIONAL(USE_VMX, test $have_vmx_intrinsics = yes)
+
+dnl ==========================================================================
+dnl Check if assembler is gas compatible and supports ARM SIMD instructions
+have_arm_simd=no
+AC_MSG_CHECKING(whether to use ARM SIMD assembler)
+xserver_save_CFLAGS=$CFLAGS
+CFLAGS="-x assembler-with-cpp $CFLAGS"
+AC_COMPILE_IFELSE([[
+.text
+.arch armv6
+.object_arch armv4
+.arm
+.altmacro
+#ifndef __ARM_EABI__
+#error EABI is required (to be sure that calling conventions are compatible)
+#endif
+pld [r0]
+uqadd8 r0, r0, r0]], have_arm_simd=yes)
+CFLAGS=$xserver_save_CFLAGS
+
+AC_ARG_ENABLE(arm-simd,
+ [AC_HELP_STRING([--disable-arm-simd],
+ [disable ARM SIMD fast paths])],
+ [enable_arm_simd=$enableval], [enable_arm_simd=auto])
+
+if test $enable_arm_simd = no ; then
+ have_arm_simd=disabled
+fi
+
+if test $have_arm_simd = yes ; then
+ AC_DEFINE(USE_ARM_SIMD, 1, [use ARM SIMD assembly optimizations])
+fi
+
+AM_CONDITIONAL(USE_ARM_SIMD, test $have_arm_simd = yes)
+
+AC_MSG_RESULT($have_arm_simd)
+if test $enable_arm_simd = yes && test $have_arm_simd = no ; then
+ AC_MSG_ERROR([ARM SIMD intrinsics not detected])
+fi
+
+dnl ==========================================================================
+dnl Check if assembler is gas compatible and supports NEON instructions
+have_arm_neon=no
+AC_MSG_CHECKING(whether to use ARM NEON assembler)
+xserver_save_CFLAGS=$CFLAGS
+CFLAGS="-x assembler-with-cpp $CFLAGS"
+AC_COMPILE_IFELSE([[
+.text
+.fpu neon
+.arch armv7a
+.object_arch armv4
+.eabi_attribute 10, 0
+.arm
+.altmacro
+#ifndef __ARM_EABI__
+#error EABI is required (to be sure that calling conventions are compatible)
+#endif
+pld [r0]
+vmovn.u16 d0, q0]], have_arm_neon=yes)
+CFLAGS=$xserver_save_CFLAGS
+
+AC_ARG_ENABLE(arm-neon,
+ [AC_HELP_STRING([--disable-arm-neon],
+ [disable ARM NEON fast paths])],
+ [enable_arm_neon=$enableval], [enable_arm_neon=auto])
+
+if test $enable_arm_neon = no ; then
+ have_arm_neon=disabled
+fi
+
+if test $have_arm_neon = yes ; then
+ AC_DEFINE(USE_ARM_NEON, 1, [use ARM NEON assembly optimizations])
+fi
+
+AM_CONDITIONAL(USE_ARM_NEON, test $have_arm_neon = yes)
+
+AC_MSG_RESULT($have_arm_neon)
+if test $enable_arm_neon = yes && test $have_arm_neon = no ; then
+ AC_MSG_ERROR([ARM NEON intrinsics not detected])
+fi
+
+dnl =========================================================================================
+dnl Check for GNU-style inline assembly support
+
+have_gcc_inline_asm=no
+AC_MSG_CHECKING(whether to use GNU-style inline assembler)
+AC_COMPILE_IFELSE([
+int main () {
+ /* Most modern architectures have a NOP instruction, so this is a fairly generic test. */
+ asm volatile ( "\tnop\n" : : : "cc", "memory" );
+ return 0;
+}], have_gcc_inline_asm=yes)
+
+AC_ARG_ENABLE(gcc-inline-asm,
+ [AC_HELP_STRING([--disable-gcc-inline-asm],
+ [disable GNU-style inline assembler])],
+ [enable_gcc_inline_asm=$enableval], [enable_gcc_inline_asm=auto])
+
+if test $enable_gcc_inline_asm = no ; then
+ have_gcc_inline_asm=disabled
+fi
+
+if test $have_gcc_inline_asm = yes ; then
+ AC_DEFINE(USE_GCC_INLINE_ASM, 1, [use GNU-style inline assembler])
+fi
+
+AC_MSG_RESULT($have_gcc_inline_asm)
+if test $enable_gcc_inline_asm = yes && test $have_gcc_inline_asm = no ; then
+ AC_MSG_ERROR([GNU-style inline assembler not detected])
+fi
+
+AM_CONDITIONAL(USE_GCC_INLINE_ASM, test $have_gcc_inline_asm = yes)
+
+dnl ==============================================
+dnl Timers
+
+AC_ARG_ENABLE(timers,
+ [AC_HELP_STRING([--enable-timers],
+ [enable TIMER_BEGIN and TIMER_END macros [default=no]])],
+ [enable_timers=$enableval], [enable_timers=no])
+
+if test $enable_timers = yes ; then
+ AC_DEFINE(PIXMAN_TIMERS, 1, [enable TIMER_BEGIN/TIMER_END macros])
+fi
+AC_SUBST(PIXMAN_TIMERS)
+
+dnl ===================================
+dnl GTK+
+
+AC_ARG_ENABLE(gtk,
+ [AC_HELP_STRING([--enable-gtk],
+ [enable tests using GTK+ [default=auto]])],
+ [enable_gtk=$enableval], [enable_gtk=auto])
+
+PKG_PROG_PKG_CONFIG
+if test $enable_gtk = auto ; then
+ PKG_CHECK_EXISTS([gtk+-2.0], [enable_gtk=yes], [enable_gtk=no])
+fi
+if test $enable_gtk = yes ; then
+ PKG_CHECK_MODULES(GTK, [gtk+-2.0])
+fi
+
+AM_CONDITIONAL(HAVE_GTK, [test "x$enable_gtk" = xyes])
+
+AC_SUBST(GTK_CFLAGS)
+AC_SUBST(GTK_LIBS)
+AC_SUBST(DEP_CFLAGS)
+AC_SUBST(DEP_LIBS)
+
+dnl =====================================
+dnl posix_memalign
+
+AC_CHECK_FUNC(posix_memalign, have_posix_memalign=yes, have_posix_memalign=no)
+if test x$have_posix_memalign = xyes; then
+ AC_DEFINE(HAVE_POSIX_MEMALIGN, 1, [Whether we have posix_memalign()])
+fi
+
+dnl =====================================
+dnl Thread local storage
+
+support_for__thread=no
+
+AC_MSG_CHECKING(for __thread)
+AC_LINK_IFELSE([
+#ifdef __MINGW32__
+#error MinGW has broken __thread support
+#endif
+#ifdef __OpenBSD__
+#error OpenBSD has broken __thread support
+#endif
+static __thread int x ;
+int main () { x = 123; return x; }
+], support_for__thread=yes)
+
+if test $support_for__thread = yes; then
+ AC_DEFINE([TOOLCHAIN_SUPPORTS__THREAD],[],[Whether the tool chain supports __thread])
+fi
+
+AC_MSG_RESULT($support_for__thread)
+
+dnl
+dnl posix tls
+dnl
+
+m4_define([pthread_test_program],[dnl
+#include <stdlib.h>
+#include <pthread.h>
+
+static pthread_once_t once_control = PTHREAD_ONCE_INIT;
+static pthread_key_t key;
+
+static void
+make_key (void)
+{
+ pthread_key_create (&key, NULL);
+}
+
+int
+main ()
+{
+ void *value = NULL;
+
+ if (pthread_once (&once_control, make_key) != 0)
+ {
+ value = NULL;
+ }
+ else
+ {
+ value = pthread_getspecific (key);
+ if (!value)
+ {
+ value = malloc (100);
+ pthread_setspecific (key, value);
+ }
+ }
+ return 0;
+}
+])
+
+AC_DEFUN([PIXMAN_CHECK_PTHREAD],[dnl
+ if test "z$support_for_pthread_setspecific" != "zyes"; then
+ PIXMAN_LINK_WITH_ENV(
+ [$1], [pthread_test_program],
+ [PTHREAD_CFLAGS="$CFLAGS"
+ PTHREAD_LIBS="$LIBS"
+ PTHREAD_LDFLAGS="$LDFLAGS"
+ support_for_pthread_setspecific=yes])
+ fi
+])
+
+if test $support_for__thread = no; then
+ support_for_pthread_setspecific=no
+
+ AC_MSG_CHECKING(for pthread_setspecific)
+
+ PIXMAN_CHECK_PTHREAD([CFLAGS="-D_REENTRANT"; LIBS="-lpthread"])
+ PIXMAN_CHECK_PTHREAD([CFLAGS="-pthread"; LDFLAGS="-pthread"])
+
+ if test $support_for_pthread_setspecific = yes; then
+ CFLAGS="$CFLAGS $PTHREAD_CFLAGS"
+ AC_DEFINE([HAVE_PTHREAD_SETSPECIFIC], [], [Whether pthread_setspecific() is supported])
+ fi
+
+ AC_MSG_RESULT($support_for_pthread_setspecific);
+fi
+
+AC_SUBST(TOOLCHAIN_SUPPORTS__THREAD)
+AC_SUBST(HAVE_PTHREAD_SETSPECIFIC)
+AC_SUBST(PTHREAD_LDFLAGS)
+AC_SUBST(PTHREAD_LIBS)
+
+AC_OUTPUT([pixman-1.pc
+ pixman-1-uninstalled.pc
+ Makefile
+ pixman/Makefile
+ pixman/pixman-version.h
+ test/Makefile])
diff --git a/pixman/depcomp b/pixman/depcomp deleted file mode 100644 index df8eea7e4..000000000 --- a/pixman/depcomp +++ /dev/null @@ -1,630 +0,0 @@ -#! /bin/sh -# depcomp - compile a program generating dependencies as side-effects - -scriptversion=2009-04-28.21; # UTC - -# Copyright (C) 1999, 2000, 2003, 2004, 2005, 2006, 2007, 2009 Free -# Software Foundation, Inc. - -# This program is free software; you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation; either version 2, or (at your option) -# any later version. - -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. - -# You should have received a copy of the GNU General Public License -# along with this program. If not, see <http://www.gnu.org/licenses/>. - -# As a special exception to the GNU General Public License, if you -# distribute this file as part of a program that contains a -# configuration script generated by Autoconf, you may include it under -# the same distribution terms that you use for the rest of that program. - -# Originally written by Alexandre Oliva <oliva@dcc.unicamp.br>. - -case $1 in - '') - echo "$0: No command. Try \`$0 --help' for more information." 1>&2 - exit 1; - ;; - -h | --h*) - cat <<\EOF -Usage: depcomp [--help] [--version] PROGRAM [ARGS] - -Run PROGRAMS ARGS to compile a file, generating dependencies -as side-effects. - -Environment variables: - depmode Dependency tracking mode. - source Source file read by `PROGRAMS ARGS'. - object Object file output by `PROGRAMS ARGS'. - DEPDIR directory where to store dependencies. - depfile Dependency file to output. - tmpdepfile Temporary file to use when outputing dependencies. - libtool Whether libtool is used (yes/no). - -Report bugs to <bug-automake@gnu.org>. -EOF - exit $? - ;; - -v | --v*) - echo "depcomp $scriptversion" - exit $? - ;; -esac - -if test -z "$depmode" || test -z "$source" || test -z "$object"; then - echo "depcomp: Variables source, object and depmode must be set" 1>&2 - exit 1 -fi - -# Dependencies for sub/bar.o or sub/bar.obj go into sub/.deps/bar.Po. -depfile=${depfile-`echo "$object" | - sed 's|[^\\/]*$|'${DEPDIR-.deps}'/&|;s|\.\([^.]*\)$|.P\1|;s|Pobj$|Po|'`} -tmpdepfile=${tmpdepfile-`echo "$depfile" | sed 's/\.\([^.]*\)$/.T\1/'`} - -rm -f "$tmpdepfile" - -# Some modes work just like other modes, but use different flags. We -# parameterize here, but still list the modes in the big case below, -# to make depend.m4 easier to write. Note that we *cannot* use a case -# here, because this file can only contain one case statement. -if test "$depmode" = hp; then - # HP compiler uses -M and no extra arg. - gccflag=-M - depmode=gcc -fi - -if test "$depmode" = dashXmstdout; then - # This is just like dashmstdout with a different argument. - dashmflag=-xM - depmode=dashmstdout -fi - -cygpath_u="cygpath -u -f -" -if test "$depmode" = msvcmsys; then - # This is just like msvisualcpp but w/o cygpath translation. - # Just convert the backslash-escaped backslashes to single forward - # slashes to satisfy depend.m4 - cygpath_u="sed s,\\\\\\\\,/,g" - depmode=msvisualcpp -fi - -case "$depmode" in -gcc3) -## gcc 3 implements dependency tracking that does exactly what -## we want. Yay! Note: for some reason libtool 1.4 doesn't like -## it if -MD -MP comes after the -MF stuff. Hmm. -## Unfortunately, FreeBSD c89 acceptance of flags depends upon -## the command line argument order; so add the flags where they -## appear in depend2.am. Note that the slowdown incurred here -## affects only configure: in makefiles, %FASTDEP% shortcuts this. - for arg - do - case $arg in - -c) set fnord "$@" -MT "$object" -MD -MP -MF "$tmpdepfile" "$arg" ;; - *) set fnord "$@" "$arg" ;; - esac - shift # fnord - shift # $arg - done - "$@" - stat=$? - if test $stat -eq 0; then : - else - rm -f "$tmpdepfile" - exit $stat - fi - mv "$tmpdepfile" "$depfile" - ;; - -gcc) -## There are various ways to get dependency output from gcc. Here's -## why we pick this rather obscure method: -## - Don't want to use -MD because we'd like the dependencies to end -## up in a subdir. Having to rename by hand is ugly. -## (We might end up doing this anyway to support other compilers.) -## - The DEPENDENCIES_OUTPUT environment variable makes gcc act like -## -MM, not -M (despite what the docs say). -## - Using -M directly means running the compiler twice (even worse -## than renaming). - if test -z "$gccflag"; then - gccflag=-MD, - fi - "$@" -Wp,"$gccflag$tmpdepfile" - stat=$? - if test $stat -eq 0; then : - else - rm -f "$tmpdepfile" - exit $stat - fi - rm -f "$depfile" - echo "$object : \\" > "$depfile" - alpha=ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz -## The second -e expression handles DOS-style file names with drive letters. - sed -e 's/^[^:]*: / /' \ - -e 's/^['$alpha']:\/[^:]*: / /' < "$tmpdepfile" >> "$depfile" -## This next piece of magic avoids the `deleted header file' problem. -## The problem is that when a header file which appears in a .P file -## is deleted, the dependency causes make to die (because there is -## typically no way to rebuild the header). We avoid this by adding -## dummy dependencies for each header file. Too bad gcc doesn't do -## this for us directly. - tr ' ' ' -' < "$tmpdepfile" | -## Some versions of gcc put a space before the `:'. On the theory -## that the space means something, we add a space to the output as -## well. -## Some versions of the HPUX 10.20 sed can't process this invocation -## correctly. Breaking it into two sed invocations is a workaround. - sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' | sed -e 's/$/ :/' >> "$depfile" - rm -f "$tmpdepfile" - ;; - -hp) - # This case exists only to let depend.m4 do its work. It works by - # looking at the text of this script. This case will never be run, - # since it is checked for above. - exit 1 - ;; - -sgi) - if test "$libtool" = yes; then - "$@" "-Wp,-MDupdate,$tmpdepfile" - else - "$@" -MDupdate "$tmpdepfile" - fi - stat=$? - if test $stat -eq 0; then : - else - rm -f "$tmpdepfile" - exit $stat - fi - rm -f "$depfile" - - if test -f "$tmpdepfile"; then # yes, the sourcefile depend on other files - echo "$object : \\" > "$depfile" - - # Clip off the initial element (the dependent). Don't try to be - # clever and replace this with sed code, as IRIX sed won't handle - # lines with more than a fixed number of characters (4096 in - # IRIX 6.2 sed, 8192 in IRIX 6.5). We also remove comment lines; - # the IRIX cc adds comments like `#:fec' to the end of the - # dependency line. - tr ' ' ' -' < "$tmpdepfile" \ - | sed -e 's/^.*\.o://' -e 's/#.*$//' -e '/^$/ d' | \ - tr ' -' ' ' >> "$depfile" - echo >> "$depfile" - - # The second pass generates a dummy entry for each header file. - tr ' ' ' -' < "$tmpdepfile" \ - | sed -e 's/^.*\.o://' -e 's/#.*$//' -e '/^$/ d' -e 's/$/:/' \ - >> "$depfile" - else - # The sourcefile does not contain any dependencies, so just - # store a dummy comment line, to avoid errors with the Makefile - # "include basename.Plo" scheme. - echo "#dummy" > "$depfile" - fi - rm -f "$tmpdepfile" - ;; - -aix) - # The C for AIX Compiler uses -M and outputs the dependencies - # in a .u file. In older versions, this file always lives in the - # current directory. Also, the AIX compiler puts `$object:' at the - # start of each line; $object doesn't have directory information. - # Version 6 uses the directory in both cases. - dir=`echo "$object" | sed -e 's|/[^/]*$|/|'` - test "x$dir" = "x$object" && dir= - base=`echo "$object" | sed -e 's|^.*/||' -e 's/\.o$//' -e 's/\.lo$//'` - if test "$libtool" = yes; then - tmpdepfile1=$dir$base.u - tmpdepfile2=$base.u - tmpdepfile3=$dir.libs/$base.u - "$@" -Wc,-M - else - tmpdepfile1=$dir$base.u - tmpdepfile2=$dir$base.u - tmpdepfile3=$dir$base.u - "$@" -M - fi - stat=$? - - if test $stat -eq 0; then : - else - rm -f "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3" - exit $stat - fi - - for tmpdepfile in "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3" - do - test -f "$tmpdepfile" && break - done - if test -f "$tmpdepfile"; then - # Each line is of the form `foo.o: dependent.h'. - # Do two passes, one to just change these to - # `$object: dependent.h' and one to simply `dependent.h:'. - sed -e "s,^.*\.[a-z]*:,$object:," < "$tmpdepfile" > "$depfile" - # That's a tab and a space in the []. - sed -e 's,^.*\.[a-z]*:[ ]*,,' -e 's,$,:,' < "$tmpdepfile" >> "$depfile" - else - # The sourcefile does not contain any dependencies, so just - # store a dummy comment line, to avoid errors with the Makefile - # "include basename.Plo" scheme. - echo "#dummy" > "$depfile" - fi - rm -f "$tmpdepfile" - ;; - -icc) - # Intel's C compiler understands `-MD -MF file'. However on - # icc -MD -MF foo.d -c -o sub/foo.o sub/foo.c - # ICC 7.0 will fill foo.d with something like - # foo.o: sub/foo.c - # foo.o: sub/foo.h - # which is wrong. We want: - # sub/foo.o: sub/foo.c - # sub/foo.o: sub/foo.h - # sub/foo.c: - # sub/foo.h: - # ICC 7.1 will output - # foo.o: sub/foo.c sub/foo.h - # and will wrap long lines using \ : - # foo.o: sub/foo.c ... \ - # sub/foo.h ... \ - # ... - - "$@" -MD -MF "$tmpdepfile" - stat=$? - if test $stat -eq 0; then : - else - rm -f "$tmpdepfile" - exit $stat - fi - rm -f "$depfile" - # Each line is of the form `foo.o: dependent.h', - # or `foo.o: dep1.h dep2.h \', or ` dep3.h dep4.h \'. - # Do two passes, one to just change these to - # `$object: dependent.h' and one to simply `dependent.h:'. - sed "s,^[^:]*:,$object :," < "$tmpdepfile" > "$depfile" - # Some versions of the HPUX 10.20 sed can't process this invocation - # correctly. Breaking it into two sed invocations is a workaround. - sed 's,^[^:]*: \(.*\)$,\1,;s/^\\$//;/^$/d;/:$/d' < "$tmpdepfile" | - sed -e 's/$/ :/' >> "$depfile" - rm -f "$tmpdepfile" - ;; - -hp2) - # The "hp" stanza above does not work with aCC (C++) and HP's ia64 - # compilers, which have integrated preprocessors. The correct option - # to use with these is +Maked; it writes dependencies to a file named - # 'foo.d', which lands next to the object file, wherever that - # happens to be. - # Much of this is similar to the tru64 case; see comments there. - dir=`echo "$object" | sed -e 's|/[^/]*$|/|'` - test "x$dir" = "x$object" && dir= - base=`echo "$object" | sed -e 's|^.*/||' -e 's/\.o$//' -e 's/\.lo$//'` - if test "$libtool" = yes; then - tmpdepfile1=$dir$base.d - tmpdepfile2=$dir.libs/$base.d - "$@" -Wc,+Maked - else - tmpdepfile1=$dir$base.d - tmpdepfile2=$dir$base.d - "$@" +Maked - fi - stat=$? - if test $stat -eq 0; then : - else - rm -f "$tmpdepfile1" "$tmpdepfile2" - exit $stat - fi - - for tmpdepfile in "$tmpdepfile1" "$tmpdepfile2" - do - test -f "$tmpdepfile" && break - done - if test -f "$tmpdepfile"; then - sed -e "s,^.*\.[a-z]*:,$object:," "$tmpdepfile" > "$depfile" - # Add `dependent.h:' lines. - sed -ne '2,${ - s/^ *// - s/ \\*$// - s/$/:/ - p - }' "$tmpdepfile" >> "$depfile" - else - echo "#dummy" > "$depfile" - fi - rm -f "$tmpdepfile" "$tmpdepfile2" - ;; - -tru64) - # The Tru64 compiler uses -MD to generate dependencies as a side - # effect. `cc -MD -o foo.o ...' puts the dependencies into `foo.o.d'. - # At least on Alpha/Redhat 6.1, Compaq CCC V6.2-504 seems to put - # dependencies in `foo.d' instead, so we check for that too. - # Subdirectories are respected. - dir=`echo "$object" | sed -e 's|/[^/]*$|/|'` - test "x$dir" = "x$object" && dir= - base=`echo "$object" | sed -e 's|^.*/||' -e 's/\.o$//' -e 's/\.lo$//'` - - if test "$libtool" = yes; then - # With Tru64 cc, shared objects can also be used to make a - # static library. This mechanism is used in libtool 1.4 series to - # handle both shared and static libraries in a single compilation. - # With libtool 1.4, dependencies were output in $dir.libs/$base.lo.d. - # - # With libtool 1.5 this exception was removed, and libtool now - # generates 2 separate objects for the 2 libraries. These two - # compilations output dependencies in $dir.libs/$base.o.d and - # in $dir$base.o.d. We have to check for both files, because - # one of the two compilations can be disabled. We should prefer - # $dir$base.o.d over $dir.libs/$base.o.d because the latter is - # automatically cleaned when .libs/ is deleted, while ignoring - # the former would cause a distcleancheck panic. - tmpdepfile1=$dir.libs/$base.lo.d # libtool 1.4 - tmpdepfile2=$dir$base.o.d # libtool 1.5 - tmpdepfile3=$dir.libs/$base.o.d # libtool 1.5 - tmpdepfile4=$dir.libs/$base.d # Compaq CCC V6.2-504 - "$@" -Wc,-MD - else - tmpdepfile1=$dir$base.o.d - tmpdepfile2=$dir$base.d - tmpdepfile3=$dir$base.d - tmpdepfile4=$dir$base.d - "$@" -MD - fi - - stat=$? - if test $stat -eq 0; then : - else - rm -f "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3" "$tmpdepfile4" - exit $stat - fi - - for tmpdepfile in "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3" "$tmpdepfile4" - do - test -f "$tmpdepfile" && break - done - if test -f "$tmpdepfile"; then - sed -e "s,^.*\.[a-z]*:,$object:," < "$tmpdepfile" > "$depfile" - # That's a tab and a space in the []. - sed -e 's,^.*\.[a-z]*:[ ]*,,' -e 's,$,:,' < "$tmpdepfile" >> "$depfile" - else - echo "#dummy" > "$depfile" - fi - rm -f "$tmpdepfile" - ;; - -#nosideeffect) - # This comment above is used by automake to tell side-effect - # dependency tracking mechanisms from slower ones. - -dashmstdout) - # Important note: in order to support this mode, a compiler *must* - # always write the preprocessed file to stdout, regardless of -o. - "$@" || exit $? - - # Remove the call to Libtool. - if test "$libtool" = yes; then - while test "X$1" != 'X--mode=compile'; do - shift - done - shift - fi - - # Remove `-o $object'. - IFS=" " - for arg - do - case $arg in - -o) - shift - ;; - $object) - shift - ;; - *) - set fnord "$@" "$arg" - shift # fnord - shift # $arg - ;; - esac - done - - test -z "$dashmflag" && dashmflag=-M - # Require at least two characters before searching for `:' - # in the target name. This is to cope with DOS-style filenames: - # a dependency such as `c:/foo/bar' could be seen as target `c' otherwise. - "$@" $dashmflag | - sed 's:^[ ]*[^: ][^:][^:]*\:[ ]*:'"$object"'\: :' > "$tmpdepfile" - rm -f "$depfile" - cat < "$tmpdepfile" > "$depfile" - tr ' ' ' -' < "$tmpdepfile" | \ -## Some versions of the HPUX 10.20 sed can't process this invocation -## correctly. Breaking it into two sed invocations is a workaround. - sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' | sed -e 's/$/ :/' >> "$depfile" - rm -f "$tmpdepfile" - ;; - -dashXmstdout) - # This case only exists to satisfy depend.m4. It is never actually - # run, as this mode is specially recognized in the preamble. - exit 1 - ;; - -makedepend) - "$@" || exit $? - # Remove any Libtool call - if test "$libtool" = yes; then - while test "X$1" != 'X--mode=compile'; do - shift - done - shift - fi - # X makedepend - shift - cleared=no eat=no - for arg - do - case $cleared in - no) - set ""; shift - cleared=yes ;; - esac - if test $eat = yes; then - eat=no - continue - fi - case "$arg" in - -D*|-I*) - set fnord "$@" "$arg"; shift ;; - # Strip any option that makedepend may not understand. Remove - # the object too, otherwise makedepend will parse it as a source file. - -arch) - eat=yes ;; - -*|$object) - ;; - *) - set fnord "$@" "$arg"; shift ;; - esac - done - obj_suffix=`echo "$object" | sed 's/^.*\././'` - touch "$tmpdepfile" - ${MAKEDEPEND-makedepend} -o"$obj_suffix" -f"$tmpdepfile" "$@" - rm -f "$depfile" - cat < "$tmpdepfile" > "$depfile" - sed '1,2d' "$tmpdepfile" | tr ' ' ' -' | \ -## Some versions of the HPUX 10.20 sed can't process this invocation -## correctly. Breaking it into two sed invocations is a workaround. - sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' | sed -e 's/$/ :/' >> "$depfile" - rm -f "$tmpdepfile" "$tmpdepfile".bak - ;; - -cpp) - # Important note: in order to support this mode, a compiler *must* - # always write the preprocessed file to stdout. - "$@" || exit $? - - # Remove the call to Libtool. - if test "$libtool" = yes; then - while test "X$1" != 'X--mode=compile'; do - shift - done - shift - fi - - # Remove `-o $object'. - IFS=" " - for arg - do - case $arg in - -o) - shift - ;; - $object) - shift - ;; - *) - set fnord "$@" "$arg" - shift # fnord - shift # $arg - ;; - esac - done - - "$@" -E | - sed -n -e '/^# [0-9][0-9]* "\([^"]*\)".*/ s:: \1 \\:p' \ - -e '/^#line [0-9][0-9]* "\([^"]*\)".*/ s:: \1 \\:p' | - sed '$ s: \\$::' > "$tmpdepfile" - rm -f "$depfile" - echo "$object : \\" > "$depfile" - cat < "$tmpdepfile" >> "$depfile" - sed < "$tmpdepfile" '/^$/d;s/^ //;s/ \\$//;s/$/ :/' >> "$depfile" - rm -f "$tmpdepfile" - ;; - -msvisualcpp) - # Important note: in order to support this mode, a compiler *must* - # always write the preprocessed file to stdout. - "$@" || exit $? - - # Remove the call to Libtool. - if test "$libtool" = yes; then - while test "X$1" != 'X--mode=compile'; do - shift - done - shift - fi - - IFS=" " - for arg - do - case "$arg" in - -o) - shift - ;; - $object) - shift - ;; - "-Gm"|"/Gm"|"-Gi"|"/Gi"|"-ZI"|"/ZI") - set fnord "$@" - shift - shift - ;; - *) - set fnord "$@" "$arg" - shift - shift - ;; - esac - done - "$@" -E 2>/dev/null | - sed -n '/^#line [0-9][0-9]* "\([^"]*\)"/ s::\1:p' | $cygpath_u | sort -u > "$tmpdepfile" - rm -f "$depfile" - echo "$object : \\" > "$depfile" - sed < "$tmpdepfile" -n -e 's% %\\ %g' -e '/^\(.*\)$/ s:: \1 \\:p' >> "$depfile" - echo " " >> "$depfile" - sed < "$tmpdepfile" -n -e 's% %\\ %g' -e '/^\(.*\)$/ s::\1\::p' >> "$depfile" - rm -f "$tmpdepfile" - ;; - -msvcmsys) - # This case exists only to let depend.m4 do its work. It works by - # looking at the text of this script. This case will never be run, - # since it is checked for above. - exit 1 - ;; - -none) - exec "$@" - ;; - -*) - echo "Unknown depmode $depmode" 1>&2 - exit 1 - ;; -esac - -exit 0 - -# Local Variables: -# mode: shell-script -# sh-indentation: 2 -# eval: (add-hook 'write-file-hooks 'time-stamp) -# time-stamp-start: "scriptversion=" -# time-stamp-format: "%:y-%02m-%02d.%02H" -# time-stamp-time-zone: "UTC" -# time-stamp-end: "; # UTC" -# End: diff --git a/pixman/install-sh b/pixman/install-sh deleted file mode 100644 index 6781b987b..000000000 --- a/pixman/install-sh +++ /dev/null @@ -1,520 +0,0 @@ -#!/bin/sh -# install - install a program, script, or datafile - -scriptversion=2009-04-28.21; # UTC - -# This originates from X11R5 (mit/util/scripts/install.sh), which was -# later released in X11R6 (xc/config/util/install.sh) with the -# following copyright and license. -# -# Copyright (C) 1994 X Consortium -# -# Permission is hereby granted, free of charge, to any person obtaining a copy -# of this software and associated documentation files (the "Software"), to -# deal in the Software without restriction, including without limitation the -# rights to use, copy, modify, merge, publish, distribute, sublicense, and/or -# sell copies of the Software, and to permit persons to whom the Software is -# furnished to do so, subject to the following conditions: -# -# The above copyright notice and this permission notice shall be included in -# all copies or substantial portions of the Software. -# -# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR -# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, -# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE -# X CONSORTIUM BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN -# AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNEC- -# TION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. -# -# Except as contained in this notice, the name of the X Consortium shall not -# be used in advertising or otherwise to promote the sale, use or other deal- -# ings in this Software without prior written authorization from the X Consor- -# tium. -# -# -# FSF changes to this file are in the public domain. -# -# Calling this script install-sh is preferred over install.sh, to prevent -# `make' implicit rules from creating a file called install from it -# when there is no Makefile. -# -# This script is compatible with the BSD install script, but was written -# from scratch. - -nl=' -' -IFS=" "" $nl" - -# set DOITPROG to echo to test this script - -# Don't use :- since 4.3BSD and earlier shells don't like it. -doit=${DOITPROG-} -if test -z "$doit"; then - doit_exec=exec -else - doit_exec=$doit -fi - -# Put in absolute file names if you don't have them in your path; -# or use environment vars. - -chgrpprog=${CHGRPPROG-chgrp} -chmodprog=${CHMODPROG-chmod} -chownprog=${CHOWNPROG-chown} -cmpprog=${CMPPROG-cmp} -cpprog=${CPPROG-cp} -mkdirprog=${MKDIRPROG-mkdir} -mvprog=${MVPROG-mv} -rmprog=${RMPROG-rm} -stripprog=${STRIPPROG-strip} - -posix_glob='?' -initialize_posix_glob=' - test "$posix_glob" != "?" || { - if (set -f) 2>/dev/null; then - posix_glob= - else - posix_glob=: - fi - } -' - -posix_mkdir= - -# Desired mode of installed file. -mode=0755 - -chgrpcmd= -chmodcmd=$chmodprog -chowncmd= -mvcmd=$mvprog -rmcmd="$rmprog -f" -stripcmd= - -src= -dst= -dir_arg= -dst_arg= - -copy_on_change=false -no_target_directory= - -usage="\ -Usage: $0 [OPTION]... [-T] SRCFILE DSTFILE - or: $0 [OPTION]... SRCFILES... DIRECTORY - or: $0 [OPTION]... -t DIRECTORY SRCFILES... - or: $0 [OPTION]... -d DIRECTORIES... - -In the 1st form, copy SRCFILE to DSTFILE. -In the 2nd and 3rd, copy all SRCFILES to DIRECTORY. -In the 4th, create DIRECTORIES. - -Options: - --help display this help and exit. - --version display version info and exit. - - -c (ignored) - -C install only if different (preserve the last data modification time) - -d create directories instead of installing files. - -g GROUP $chgrpprog installed files to GROUP. - -m MODE $chmodprog installed files to MODE. - -o USER $chownprog installed files to USER. - -s $stripprog installed files. - -t DIRECTORY install into DIRECTORY. - -T report an error if DSTFILE is a directory. - -Environment variables override the default commands: - CHGRPPROG CHMODPROG CHOWNPROG CMPPROG CPPROG MKDIRPROG MVPROG - RMPROG STRIPPROG -" - -while test $# -ne 0; do - case $1 in - -c) ;; - - -C) copy_on_change=true;; - - -d) dir_arg=true;; - - -g) chgrpcmd="$chgrpprog $2" - shift;; - - --help) echo "$usage"; exit $?;; - - -m) mode=$2 - case $mode in - *' '* | *' '* | *' -'* | *'*'* | *'?'* | *'['*) - echo "$0: invalid mode: $mode" >&2 - exit 1;; - esac - shift;; - - -o) chowncmd="$chownprog $2" - shift;; - - -s) stripcmd=$stripprog;; - - -t) dst_arg=$2 - shift;; - - -T) no_target_directory=true;; - - --version) echo "$0 $scriptversion"; exit $?;; - - --) shift - break;; - - -*) echo "$0: invalid option: $1" >&2 - exit 1;; - - *) break;; - esac - shift -done - -if test $# -ne 0 && test -z "$dir_arg$dst_arg"; then - # When -d is used, all remaining arguments are directories to create. - # When -t is used, the destination is already specified. - # Otherwise, the last argument is the destination. Remove it from $@. - for arg - do - if test -n "$dst_arg"; then - # $@ is not empty: it contains at least $arg. - set fnord "$@" "$dst_arg" - shift # fnord - fi - shift # arg - dst_arg=$arg - done -fi - -if test $# -eq 0; then - if test -z "$dir_arg"; then - echo "$0: no input file specified." >&2 - exit 1 - fi - # It's OK to call `install-sh -d' without argument. - # This can happen when creating conditional directories. - exit 0 -fi - -if test -z "$dir_arg"; then - trap '(exit $?); exit' 1 2 13 15 - - # Set umask so as not to create temps with too-generous modes. - # However, 'strip' requires both read and write access to temps. - case $mode in - # Optimize common cases. - *644) cp_umask=133;; - *755) cp_umask=22;; - - *[0-7]) - if test -z "$stripcmd"; then - u_plus_rw= - else - u_plus_rw='% 200' - fi - cp_umask=`expr '(' 777 - $mode % 1000 ')' $u_plus_rw`;; - *) - if test -z "$stripcmd"; then - u_plus_rw= - else - u_plus_rw=,u+rw - fi - cp_umask=$mode$u_plus_rw;; - esac -fi - -for src -do - # Protect names starting with `-'. - case $src in - -*) src=./$src;; - esac - - if test -n "$dir_arg"; then - dst=$src - dstdir=$dst - test -d "$dstdir" - dstdir_status=$? - else - - # Waiting for this to be detected by the "$cpprog $src $dsttmp" command - # might cause directories to be created, which would be especially bad - # if $src (and thus $dsttmp) contains '*'. - if test ! -f "$src" && test ! -d "$src"; then - echo "$0: $src does not exist." >&2 - exit 1 - fi - - if test -z "$dst_arg"; then - echo "$0: no destination specified." >&2 - exit 1 - fi - - dst=$dst_arg - # Protect names starting with `-'. - case $dst in - -*) dst=./$dst;; - esac - - # If destination is a directory, append the input filename; won't work - # if double slashes aren't ignored. - if test -d "$dst"; then - if test -n "$no_target_directory"; then - echo "$0: $dst_arg: Is a directory" >&2 - exit 1 - fi - dstdir=$dst - dst=$dstdir/`basename "$src"` - dstdir_status=0 - else - # Prefer dirname, but fall back on a substitute if dirname fails. - dstdir=` - (dirname "$dst") 2>/dev/null || - expr X"$dst" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ - X"$dst" : 'X\(//\)[^/]' \| \ - X"$dst" : 'X\(//\)$' \| \ - X"$dst" : 'X\(/\)' \| . 2>/dev/null || - echo X"$dst" | - sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ - s//\1/ - q - } - /^X\(\/\/\)[^/].*/{ - s//\1/ - q - } - /^X\(\/\/\)$/{ - s//\1/ - q - } - /^X\(\/\).*/{ - s//\1/ - q - } - s/.*/./; q' - ` - - test -d "$dstdir" - dstdir_status=$? - fi - fi - - obsolete_mkdir_used=false - - if test $dstdir_status != 0; then - case $posix_mkdir in - '') - # Create intermediate dirs using mode 755 as modified by the umask. - # This is like FreeBSD 'install' as of 1997-10-28. - umask=`umask` - case $stripcmd.$umask in - # Optimize common cases. - *[2367][2367]) mkdir_umask=$umask;; - .*0[02][02] | .[02][02] | .[02]) mkdir_umask=22;; - - *[0-7]) - mkdir_umask=`expr $umask + 22 \ - - $umask % 100 % 40 + $umask % 20 \ - - $umask % 10 % 4 + $umask % 2 - `;; - *) mkdir_umask=$umask,go-w;; - esac - - # With -d, create the new directory with the user-specified mode. - # Otherwise, rely on $mkdir_umask. - if test -n "$dir_arg"; then - mkdir_mode=-m$mode - else - mkdir_mode= - fi - - posix_mkdir=false - case $umask in - *[123567][0-7][0-7]) - # POSIX mkdir -p sets u+wx bits regardless of umask, which - # is incompatible with FreeBSD 'install' when (umask & 300) != 0. - ;; - *) - tmpdir=${TMPDIR-/tmp}/ins$RANDOM-$$ - trap 'ret=$?; rmdir "$tmpdir/d" "$tmpdir" 2>/dev/null; exit $ret' 0 - - if (umask $mkdir_umask && - exec $mkdirprog $mkdir_mode -p -- "$tmpdir/d") >/dev/null 2>&1 - then - if test -z "$dir_arg" || { - # Check for POSIX incompatibilities with -m. - # HP-UX 11.23 and IRIX 6.5 mkdir -m -p sets group- or - # other-writeable bit of parent directory when it shouldn't. - # FreeBSD 6.1 mkdir -m -p sets mode of existing directory. - ls_ld_tmpdir=`ls -ld "$tmpdir"` - case $ls_ld_tmpdir in - d????-?r-*) different_mode=700;; - d????-?--*) different_mode=755;; - *) false;; - esac && - $mkdirprog -m$different_mode -p -- "$tmpdir" && { - ls_ld_tmpdir_1=`ls -ld "$tmpdir"` - test "$ls_ld_tmpdir" = "$ls_ld_tmpdir_1" - } - } - then posix_mkdir=: - fi - rmdir "$tmpdir/d" "$tmpdir" - else - # Remove any dirs left behind by ancient mkdir implementations. - rmdir ./$mkdir_mode ./-p ./-- 2>/dev/null - fi - trap '' 0;; - esac;; - esac - - if - $posix_mkdir && ( - umask $mkdir_umask && - $doit_exec $mkdirprog $mkdir_mode -p -- "$dstdir" - ) - then : - else - - # The umask is ridiculous, or mkdir does not conform to POSIX, - # or it failed possibly due to a race condition. Create the - # directory the slow way, step by step, checking for races as we go. - - case $dstdir in - /*) prefix='/';; - -*) prefix='./';; - *) prefix='';; - esac - - eval "$initialize_posix_glob" - - oIFS=$IFS - IFS=/ - $posix_glob set -f - set fnord $dstdir - shift - $posix_glob set +f - IFS=$oIFS - - prefixes= - - for d - do - test -z "$d" && continue - - prefix=$prefix$d - if test -d "$prefix"; then - prefixes= - else - if $posix_mkdir; then - (umask=$mkdir_umask && - $doit_exec $mkdirprog $mkdir_mode -p -- "$dstdir") && break - # Don't fail if two instances are running concurrently. - test -d "$prefix" || exit 1 - else - case $prefix in - *\'*) qprefix=`echo "$prefix" | sed "s/'/'\\\\\\\\''/g"`;; - *) qprefix=$prefix;; - esac - prefixes="$prefixes '$qprefix'" - fi - fi - prefix=$prefix/ - done - - if test -n "$prefixes"; then - # Don't fail if two instances are running concurrently. - (umask $mkdir_umask && - eval "\$doit_exec \$mkdirprog $prefixes") || - test -d "$dstdir" || exit 1 - obsolete_mkdir_used=true - fi - fi - fi - - if test -n "$dir_arg"; then - { test -z "$chowncmd" || $doit $chowncmd "$dst"; } && - { test -z "$chgrpcmd" || $doit $chgrpcmd "$dst"; } && - { test "$obsolete_mkdir_used$chowncmd$chgrpcmd" = false || - test -z "$chmodcmd" || $doit $chmodcmd $mode "$dst"; } || exit 1 - else - - # Make a couple of temp file names in the proper directory. - dsttmp=$dstdir/_inst.$$_ - rmtmp=$dstdir/_rm.$$_ - - # Trap to clean up those temp files at exit. - trap 'ret=$?; rm -f "$dsttmp" "$rmtmp" && exit $ret' 0 - - # Copy the file name to the temp name. - (umask $cp_umask && $doit_exec $cpprog "$src" "$dsttmp") && - - # and set any options; do chmod last to preserve setuid bits. - # - # If any of these fail, we abort the whole thing. If we want to - # ignore errors from any of these, just make sure not to ignore - # errors from the above "$doit $cpprog $src $dsttmp" command. - # - { test -z "$chowncmd" || $doit $chowncmd "$dsttmp"; } && - { test -z "$chgrpcmd" || $doit $chgrpcmd "$dsttmp"; } && - { test -z "$stripcmd" || $doit $stripcmd "$dsttmp"; } && - { test -z "$chmodcmd" || $doit $chmodcmd $mode "$dsttmp"; } && - - # If -C, don't bother to copy if it wouldn't change the file. - if $copy_on_change && - old=`LC_ALL=C ls -dlL "$dst" 2>/dev/null` && - new=`LC_ALL=C ls -dlL "$dsttmp" 2>/dev/null` && - - eval "$initialize_posix_glob" && - $posix_glob set -f && - set X $old && old=:$2:$4:$5:$6 && - set X $new && new=:$2:$4:$5:$6 && - $posix_glob set +f && - - test "$old" = "$new" && - $cmpprog "$dst" "$dsttmp" >/dev/null 2>&1 - then - rm -f "$dsttmp" - else - # Rename the file to the real destination. - $doit $mvcmd -f "$dsttmp" "$dst" 2>/dev/null || - - # The rename failed, perhaps because mv can't rename something else - # to itself, or perhaps because mv is so ancient that it does not - # support -f. - { - # Now remove or move aside any old file at destination location. - # We try this two ways since rm can't unlink itself on some - # systems and the destination file might be busy for other - # reasons. In this case, the final cleanup might fail but the new - # file should still install successfully. - { - test ! -f "$dst" || - $doit $rmcmd -f "$dst" 2>/dev/null || - { $doit $mvcmd -f "$dst" "$rmtmp" 2>/dev/null && - { $doit $rmcmd -f "$rmtmp" 2>/dev/null; :; } - } || - { echo "$0: cannot unlink or rename $dst" >&2 - (exit 1); exit 1 - } - } && - - # Now rename the file to the real destination. - $doit $mvcmd "$dsttmp" "$dst" - } - fi || exit 1 - - trap '' 0 - fi -done - -# Local variables: -# eval: (add-hook 'write-file-hooks 'time-stamp) -# time-stamp-start: "scriptversion=" -# time-stamp-format: "%:y-%02m-%02d.%02H" -# time-stamp-time-zone: "UTC" -# time-stamp-end: "; # UTC" -# End: diff --git a/pixman/ltmain.sh b/pixman/ltmain.sh deleted file mode 100644 index a72f2fd78..000000000 --- a/pixman/ltmain.sh +++ /dev/null @@ -1,8406 +0,0 @@ -# Generated from ltmain.m4sh. - -# ltmain.sh (GNU libtool) 2.2.6b -# Written by Gordon Matzigkeit <gord@gnu.ai.mit.edu>, 1996 - -# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005, 2006, 2007 2008 Free Software Foundation, Inc. -# This is free software; see the source for copying conditions. There is NO -# warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. - -# GNU Libtool is free software; you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation; either version 2 of the License, or -# (at your option) any later version. -# -# As a special exception to the GNU General Public License, -# if you distribute this file as part of a program or library that -# is built using GNU Libtool, you may include this file under the -# same distribution terms that you use for the rest of that program. -# -# GNU Libtool is distributed in the hope that it will be useful, but -# WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU -# General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with GNU Libtool; see the file COPYING. If not, a copy -# can be downloaded from http://www.gnu.org/licenses/gpl.html, -# or obtained by writing to the Free Software Foundation, Inc., -# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. - -# Usage: $progname [OPTION]... [MODE-ARG]... -# -# Provide generalized library-building support services. -# -# --config show all configuration variables -# --debug enable verbose shell tracing -# -n, --dry-run display commands without modifying any files -# --features display basic configuration information and exit -# --mode=MODE use operation mode MODE -# --preserve-dup-deps don't remove duplicate dependency libraries -# --quiet, --silent don't print informational messages -# --tag=TAG use configuration variables from tag TAG -# -v, --verbose print informational messages (default) -# --version print version information -# -h, --help print short or long help message -# -# MODE must be one of the following: -# -# clean remove files from the build directory -# compile compile a source file into a libtool object -# execute automatically set library path, then run a program -# finish complete the installation of libtool libraries -# install install libraries or executables -# link create a library or an executable -# uninstall remove libraries from an installed directory -# -# MODE-ARGS vary depending on the MODE. -# Try `$progname --help --mode=MODE' for a more detailed description of MODE. -# -# When reporting a bug, please describe a test case to reproduce it and -# include the following information: -# -# host-triplet: $host -# shell: $SHELL -# compiler: $LTCC -# compiler flags: $LTCFLAGS -# linker: $LD (gnu? $with_gnu_ld) -# $progname: (GNU libtool) 2.2.6b -# automake: $automake_version -# autoconf: $autoconf_version -# -# Report bugs to <bug-libtool@gnu.org>. - -PROGRAM=ltmain.sh -PACKAGE=libtool -VERSION=2.2.6b -TIMESTAMP="" -package_revision=1.3017 - -# Be Bourne compatible -if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then - emulate sh - NULLCMD=: - # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which - # is contrary to our usage. Disable this feature. - alias -g '${1+"$@"}'='"$@"' - setopt NO_GLOB_SUBST -else - case `(set -o) 2>/dev/null` in *posix*) set -o posix;; esac -fi -BIN_SH=xpg4; export BIN_SH # for Tru64 -DUALCASE=1; export DUALCASE # for MKS sh - -# NLS nuisances: We save the old values to restore during execute mode. -# Only set LANG and LC_ALL to C if already set. -# These must not be set unconditionally because not all systems understand -# e.g. LANG=C (notably SCO). -lt_user_locale= -lt_safe_locale= -for lt_var in LANG LANGUAGE LC_ALL LC_CTYPE LC_COLLATE LC_MESSAGES -do - eval "if test \"\${$lt_var+set}\" = set; then - save_$lt_var=\$$lt_var - $lt_var=C - export $lt_var - lt_user_locale=\"$lt_var=\\\$save_\$lt_var; \$lt_user_locale\" - lt_safe_locale=\"$lt_var=C; \$lt_safe_locale\" - fi" -done - -$lt_unset CDPATH - - - - - -: ${CP="cp -f"} -: ${ECHO="echo"} -: ${EGREP="/bin/grep -E"} -: ${FGREP="/bin/grep -F"} -: ${GREP="/bin/grep"} -: ${LN_S="ln -s"} -: ${MAKE="make"} -: ${MKDIR="mkdir"} -: ${MV="mv -f"} -: ${RM="rm -f"} -: ${SED="/bin/sed"} -: ${SHELL="${CONFIG_SHELL-/bin/sh}"} -: ${Xsed="$SED -e 1s/^X//"} - -# Global variables: -EXIT_SUCCESS=0 -EXIT_FAILURE=1 -EXIT_MISMATCH=63 # $? = 63 is used to indicate version mismatch to missing. -EXIT_SKIP=77 # $? = 77 is used to indicate a skipped test to automake. - -exit_status=$EXIT_SUCCESS - -# Make sure IFS has a sensible default -lt_nl=' -' -IFS=" $lt_nl" - -dirname="s,/[^/]*$,," -basename="s,^.*/,," - -# func_dirname_and_basename file append nondir_replacement -# perform func_basename and func_dirname in a single function -# call: -# dirname: Compute the dirname of FILE. If nonempty, -# add APPEND to the result, otherwise set result -# to NONDIR_REPLACEMENT. -# value returned in "$func_dirname_result" -# basename: Compute filename of FILE. -# value retuned in "$func_basename_result" -# Implementation must be kept synchronized with func_dirname -# and func_basename. For efficiency, we do not delegate to -# those functions but instead duplicate the functionality here. -func_dirname_and_basename () -{ - # Extract subdirectory from the argument. - func_dirname_result=`$ECHO "X${1}" | $Xsed -e "$dirname"` - if test "X$func_dirname_result" = "X${1}"; then - func_dirname_result="${3}" - else - func_dirname_result="$func_dirname_result${2}" - fi - func_basename_result=`$ECHO "X${1}" | $Xsed -e "$basename"` -} - -# Generated shell functions inserted here. - -# Work around backward compatibility issue on IRIX 6.5. On IRIX 6.4+, sh -# is ksh but when the shell is invoked as "sh" and the current value of -# the _XPG environment variable is not equal to 1 (one), the special -# positional parameter $0, within a function call, is the name of the -# function. -progpath="$0" - -# The name of this program: -# In the unlikely event $progname began with a '-', it would play havoc with -# func_echo (imagine progname=-n), so we prepend ./ in that case: -func_dirname_and_basename "$progpath" -progname=$func_basename_result -case $progname in - -*) progname=./$progname ;; -esac - -# Make sure we have an absolute path for reexecution: -case $progpath in - [\\/]*|[A-Za-z]:\\*) ;; - *[\\/]*) - progdir=$func_dirname_result - progdir=`cd "$progdir" && pwd` - progpath="$progdir/$progname" - ;; - *) - save_IFS="$IFS" - IFS=: - for progdir in $PATH; do - IFS="$save_IFS" - test -x "$progdir/$progname" && break - done - IFS="$save_IFS" - test -n "$progdir" || progdir=`pwd` - progpath="$progdir/$progname" - ;; -esac - -# Sed substitution that helps us do robust quoting. It backslashifies -# metacharacters that are still active within double-quoted strings. -Xsed="${SED}"' -e 1s/^X//' -sed_quote_subst='s/\([`"$\\]\)/\\\1/g' - -# Same as above, but do not quote variable references. -double_quote_subst='s/\(["`\\]\)/\\\1/g' - -# Re-`\' parameter expansions in output of double_quote_subst that were -# `\'-ed in input to the same. If an odd number of `\' preceded a '$' -# in input to double_quote_subst, that '$' was protected from expansion. -# Since each input `\' is now two `\'s, look for any number of runs of -# four `\'s followed by two `\'s and then a '$'. `\' that '$'. -bs='\\' -bs2='\\\\' -bs4='\\\\\\\\' -dollar='\$' -sed_double_backslash="\ - s/$bs4/&\\ -/g - s/^$bs2$dollar/$bs&/ - s/\\([^$bs]\\)$bs2$dollar/\\1$bs2$bs$dollar/g - s/\n//g" - -# Standard options: -opt_dry_run=false -opt_help=false -opt_quiet=false -opt_verbose=false -opt_warning=: - -# func_echo arg... -# Echo program name prefixed message, along with the current mode -# name if it has been set yet. -func_echo () -{ - $ECHO "$progname${mode+: }$mode: $*" -} - -# func_verbose arg... -# Echo program name prefixed message in verbose mode only. -func_verbose () -{ - $opt_verbose && func_echo ${1+"$@"} - - # A bug in bash halts the script if the last line of a function - # fails when set -e is in force, so we need another command to - # work around that: - : -} - -# func_error arg... -# Echo program name prefixed message to standard error. -func_error () -{ - $ECHO "$progname${mode+: }$mode: "${1+"$@"} 1>&2 -} - -# func_warning arg... -# Echo program name prefixed warning message to standard error. -func_warning () -{ - $opt_warning && $ECHO "$progname${mode+: }$mode: warning: "${1+"$@"} 1>&2 - - # bash bug again: - : -} - -# func_fatal_error arg... -# Echo program name prefixed message to standard error, and exit. -func_fatal_error () -{ - func_error ${1+"$@"} - exit $EXIT_FAILURE -} - -# func_fatal_help arg... -# Echo program name prefixed message to standard error, followed by -# a help hint, and exit. -func_fatal_help () -{ - func_error ${1+"$@"} - func_fatal_error "$help" -} -help="Try \`$progname --help' for more information." ## default - - -# func_grep expression filename -# Check whether EXPRESSION matches any line of FILENAME, without output. -func_grep () -{ - $GREP "$1" "$2" >/dev/null 2>&1 -} - - -# func_mkdir_p directory-path -# Make sure the entire path to DIRECTORY-PATH is available. -func_mkdir_p () -{ - my_directory_path="$1" - my_dir_list= - - if test -n "$my_directory_path" && test "$opt_dry_run" != ":"; then - - # Protect directory names starting with `-' - case $my_directory_path in - -*) my_directory_path="./$my_directory_path" ;; - esac - - # While some portion of DIR does not yet exist... - while test ! -d "$my_directory_path"; do - # ...make a list in topmost first order. Use a colon delimited - # list incase some portion of path contains whitespace. - my_dir_list="$my_directory_path:$my_dir_list" - - # If the last portion added has no slash in it, the list is done - case $my_directory_path in */*) ;; *) break ;; esac - - # ...otherwise throw away the child directory and loop - my_directory_path=`$ECHO "X$my_directory_path" | $Xsed -e "$dirname"` - done - my_dir_list=`$ECHO "X$my_dir_list" | $Xsed -e 's,:*$,,'` - - save_mkdir_p_IFS="$IFS"; IFS=':' - for my_dir in $my_dir_list; do - IFS="$save_mkdir_p_IFS" - # mkdir can fail with a `File exist' error if two processes - # try to create one of the directories concurrently. Don't - # stop in that case! - $MKDIR "$my_dir" 2>/dev/null || : - done - IFS="$save_mkdir_p_IFS" - - # Bail out if we (or some other process) failed to create a directory. - test -d "$my_directory_path" || \ - func_fatal_error "Failed to create \`$1'" - fi -} - - -# func_mktempdir [string] -# Make a temporary directory that won't clash with other running -# libtool processes, and avoids race conditions if possible. If -# given, STRING is the basename for that directory. -func_mktempdir () -{ - my_template="${TMPDIR-/tmp}/${1-$progname}" - - if test "$opt_dry_run" = ":"; then - # Return a directory name, but don't create it in dry-run mode - my_tmpdir="${my_template}-$$" - else - - # If mktemp works, use that first and foremost - my_tmpdir=`mktemp -d "${my_template}-XXXXXXXX" 2>/dev/null` - - if test ! -d "$my_tmpdir"; then - # Failing that, at least try and use $RANDOM to avoid a race - my_tmpdir="${my_template}-${RANDOM-0}$$" - - save_mktempdir_umask=`umask` - umask 0077 - $MKDIR "$my_tmpdir" - umask $save_mktempdir_umask - fi - - # If we're not in dry-run mode, bomb out on failure - test -d "$my_tmpdir" || \ - func_fatal_error "cannot create temporary directory \`$my_tmpdir'" - fi - - $ECHO "X$my_tmpdir" | $Xsed -} - - -# func_quote_for_eval arg -# Aesthetically quote ARG to be evaled later. -# This function returns two values: FUNC_QUOTE_FOR_EVAL_RESULT -# is double-quoted, suitable for a subsequent eval, whereas -# FUNC_QUOTE_FOR_EVAL_UNQUOTED_RESULT has merely all characters -# which are still active within double quotes backslashified. -func_quote_for_eval () -{ - case $1 in - *[\\\`\"\$]*) - func_quote_for_eval_unquoted_result=`$ECHO "X$1" | $Xsed -e "$sed_quote_subst"` ;; - *) - func_quote_for_eval_unquoted_result="$1" ;; - esac - - case $func_quote_for_eval_unquoted_result in - # Double-quote args containing shell metacharacters to delay - # word splitting, command substitution and and variable - # expansion for a subsequent eval. - # Many Bourne shells cannot handle close brackets correctly - # in scan sets, so we specify it separately. - *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") - func_quote_for_eval_result="\"$func_quote_for_eval_unquoted_result\"" - ;; - *) - func_quote_for_eval_result="$func_quote_for_eval_unquoted_result" - esac -} - - -# func_quote_for_expand arg -# Aesthetically quote ARG to be evaled later; same as above, -# but do not quote variable references. -func_quote_for_expand () -{ - case $1 in - *[\\\`\"]*) - my_arg=`$ECHO "X$1" | $Xsed \ - -e "$double_quote_subst" -e "$sed_double_backslash"` ;; - *) - my_arg="$1" ;; - esac - - case $my_arg in - # Double-quote args containing shell metacharacters to delay - # word splitting and command substitution for a subsequent eval. - # Many Bourne shells cannot handle close brackets correctly - # in scan sets, so we specify it separately. - *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") - my_arg="\"$my_arg\"" - ;; - esac - - func_quote_for_expand_result="$my_arg" -} - - -# func_show_eval cmd [fail_exp] -# Unless opt_silent is true, then output CMD. Then, if opt_dryrun is -# not true, evaluate CMD. If the evaluation of CMD fails, and FAIL_EXP -# is given, then evaluate it. -func_show_eval () -{ - my_cmd="$1" - my_fail_exp="${2-:}" - - ${opt_silent-false} || { - func_quote_for_expand "$my_cmd" - eval "func_echo $func_quote_for_expand_result" - } - - if ${opt_dry_run-false}; then :; else - eval "$my_cmd" - my_status=$? - if test "$my_status" -eq 0; then :; else - eval "(exit $my_status); $my_fail_exp" - fi - fi -} - - -# func_show_eval_locale cmd [fail_exp] -# Unless opt_silent is true, then output CMD. Then, if opt_dryrun is -# not true, evaluate CMD. If the evaluation of CMD fails, and FAIL_EXP -# is given, then evaluate it. Use the saved locale for evaluation. -func_show_eval_locale () -{ - my_cmd="$1" - my_fail_exp="${2-:}" - - ${opt_silent-false} || { - func_quote_for_expand "$my_cmd" - eval "func_echo $func_quote_for_expand_result" - } - - if ${opt_dry_run-false}; then :; else - eval "$lt_user_locale - $my_cmd" - my_status=$? - eval "$lt_safe_locale" - if test "$my_status" -eq 0; then :; else - eval "(exit $my_status); $my_fail_exp" - fi - fi -} - - - - - -# func_version -# Echo version message to standard output and exit. -func_version () -{ - $SED -n '/^# '$PROGRAM' (GNU /,/# warranty; / { - s/^# // - s/^# *$// - s/\((C)\)[ 0-9,-]*\( [1-9][0-9]*\)/\1\2/ - p - }' < "$progpath" - exit $? -} - -# func_usage -# Echo short help message to standard output and exit. -func_usage () -{ - $SED -n '/^# Usage:/,/# -h/ { - s/^# // - s/^# *$// - s/\$progname/'$progname'/ - p - }' < "$progpath" - $ECHO - $ECHO "run \`$progname --help | more' for full usage" - exit $? -} - -# func_help -# Echo long help message to standard output and exit. -func_help () -{ - $SED -n '/^# Usage:/,/# Report bugs to/ { - s/^# // - s/^# *$// - s*\$progname*'$progname'* - s*\$host*'"$host"'* - s*\$SHELL*'"$SHELL"'* - s*\$LTCC*'"$LTCC"'* - s*\$LTCFLAGS*'"$LTCFLAGS"'* - s*\$LD*'"$LD"'* - s/\$with_gnu_ld/'"$with_gnu_ld"'/ - s/\$automake_version/'"`(automake --version) 2>/dev/null |$SED 1q`"'/ - s/\$autoconf_version/'"`(autoconf --version) 2>/dev/null |$SED 1q`"'/ - p - }' < "$progpath" - exit $? -} - -# func_missing_arg argname -# Echo program name prefixed message to standard error and set global -# exit_cmd. -func_missing_arg () -{ - func_error "missing argument for $1" - exit_cmd=exit -} - -exit_cmd=: - - - - - -# Check that we have a working $ECHO. -if test "X$1" = X--no-reexec; then - # Discard the --no-reexec flag, and continue. - shift -elif test "X$1" = X--fallback-echo; then - # Avoid inline document here, it may be left over - : -elif test "X`{ $ECHO '\t'; } 2>/dev/null`" = 'X\t'; then - # Yippee, $ECHO works! - : -else - # Restart under the correct shell, and then maybe $ECHO will work. - exec $SHELL "$progpath" --no-reexec ${1+"$@"} -fi - -if test "X$1" = X--fallback-echo; then - # used as fallback echo - shift - cat <<EOF -$* -EOF - exit $EXIT_SUCCESS -fi - -magic="%%%MAGIC variable%%%" -magic_exe="%%%MAGIC EXE variable%%%" - -# Global variables. -# $mode is unset -nonopt= -execute_dlfiles= -preserve_args= -lo2o="s/\\.lo\$/.${objext}/" -o2lo="s/\\.${objext}\$/.lo/" -extracted_archives= -extracted_serial=0 - -opt_dry_run=false -opt_duplicate_deps=false -opt_silent=false -opt_debug=: - -# If this variable is set in any of the actions, the command in it -# will be execed at the end. This prevents here-documents from being -# left over by shells. -exec_cmd= - -# func_fatal_configuration arg... -# Echo program name prefixed message to standard error, followed by -# a configuration failure hint, and exit. -func_fatal_configuration () -{ - func_error ${1+"$@"} - func_error "See the $PACKAGE documentation for more information." - func_fatal_error "Fatal configuration error." -} - - -# func_config -# Display the configuration for all the tags in this script. -func_config () -{ - re_begincf='^# ### BEGIN LIBTOOL' - re_endcf='^# ### END LIBTOOL' - - # Default configuration. - $SED "1,/$re_begincf CONFIG/d;/$re_endcf CONFIG/,\$d" < "$progpath" - - # Now print the configurations for the tags. - for tagname in $taglist; do - $SED -n "/$re_begincf TAG CONFIG: $tagname\$/,/$re_endcf TAG CONFIG: $tagname\$/p" < "$progpath" - done - - exit $? -} - -# func_features -# Display the features supported by this script. -func_features () -{ - $ECHO "host: $host" - if test "$build_libtool_libs" = yes; then - $ECHO "enable shared libraries" - else - $ECHO "disable shared libraries" - fi - if test "$build_old_libs" = yes; then - $ECHO "enable static libraries" - else - $ECHO "disable static libraries" - fi - - exit $? -} - -# func_enable_tag tagname -# Verify that TAGNAME is valid, and either flag an error and exit, or -# enable the TAGNAME tag. We also add TAGNAME to the global $taglist -# variable here. -func_enable_tag () -{ - # Global variable: - tagname="$1" - - re_begincf="^# ### BEGIN LIBTOOL TAG CONFIG: $tagname\$" - re_endcf="^# ### END LIBTOOL TAG CONFIG: $tagname\$" - sed_extractcf="/$re_begincf/,/$re_endcf/p" - - # Validate tagname. - case $tagname in - *[!-_A-Za-z0-9,/]*) - func_fatal_error "invalid tag name: $tagname" - ;; - esac - - # Don't test for the "default" C tag, as we know it's - # there but not specially marked. - case $tagname in - CC) ;; - *) - if $GREP "$re_begincf" "$progpath" >/dev/null 2>&1; then - taglist="$taglist $tagname" - - # Evaluate the configuration. Be careful to quote the path - # and the sed script, to avoid splitting on whitespace, but - # also don't use non-portable quotes within backquotes within - # quotes we have to do it in 2 steps: - extractedcf=`$SED -n -e "$sed_extractcf" < "$progpath"` - eval "$extractedcf" - else - func_error "ignoring unknown tag $tagname" - fi - ;; - esac -} - -# Parse options once, thoroughly. This comes as soon as possible in -# the script to make things like `libtool --version' happen quickly. -{ - - # Shorthand for --mode=foo, only valid as the first argument - case $1 in - clean|clea|cle|cl) - shift; set dummy --mode clean ${1+"$@"}; shift - ;; - compile|compil|compi|comp|com|co|c) - shift; set dummy --mode compile ${1+"$@"}; shift - ;; - execute|execut|execu|exec|exe|ex|e) - shift; set dummy --mode execute ${1+"$@"}; shift - ;; - finish|finis|fini|fin|fi|f) - shift; set dummy --mode finish ${1+"$@"}; shift - ;; - install|instal|insta|inst|ins|in|i) - shift; set dummy --mode install ${1+"$@"}; shift - ;; - link|lin|li|l) - shift; set dummy --mode link ${1+"$@"}; shift - ;; - uninstall|uninstal|uninsta|uninst|unins|unin|uni|un|u) - shift; set dummy --mode uninstall ${1+"$@"}; shift - ;; - esac - - # Parse non-mode specific arguments: - while test "$#" -gt 0; do - opt="$1" - shift - - case $opt in - --config) func_config ;; - - --debug) preserve_args="$preserve_args $opt" - func_echo "enabling shell trace mode" - opt_debug='set -x' - $opt_debug - ;; - - -dlopen) test "$#" -eq 0 && func_missing_arg "$opt" && break - execute_dlfiles="$execute_dlfiles $1" - shift - ;; - - --dry-run | -n) opt_dry_run=: ;; - --features) func_features ;; - --finish) mode="finish" ;; - - --mode) test "$#" -eq 0 && func_missing_arg "$opt" && break - case $1 in - # Valid mode arguments: - clean) ;; - compile) ;; - execute) ;; - finish) ;; - install) ;; - link) ;; - relink) ;; - uninstall) ;; - - # Catch anything else as an error - *) func_error "invalid argument for $opt" - exit_cmd=exit - break - ;; - esac - - mode="$1" - shift - ;; - - --preserve-dup-deps) - opt_duplicate_deps=: ;; - - --quiet|--silent) preserve_args="$preserve_args $opt" - opt_silent=: - ;; - - --verbose| -v) preserve_args="$preserve_args $opt" - opt_silent=false - ;; - - --tag) test "$#" -eq 0 && func_missing_arg "$opt" && break - preserve_args="$preserve_args $opt $1" - func_enable_tag "$1" # tagname is set here - shift - ;; - - # Separate optargs to long options: - -dlopen=*|--mode=*|--tag=*) - func_opt_split "$opt" - set dummy "$func_opt_split_opt" "$func_opt_split_arg" ${1+"$@"} - shift - ;; - - -\?|-h) func_usage ;; - --help) opt_help=: ;; - --version) func_version ;; - - -*) func_fatal_help "unrecognized option \`$opt'" ;; - - *) nonopt="$opt" - break - ;; - esac - done - - - case $host in - *cygwin* | *mingw* | *pw32* | *cegcc*) - # don't eliminate duplications in $postdeps and $predeps - opt_duplicate_compiler_generated_deps=: - ;; - *) - opt_duplicate_compiler_generated_deps=$opt_duplicate_deps - ;; - esac - - # Having warned about all mis-specified options, bail out if - # anything was wrong. - $exit_cmd $EXIT_FAILURE -} - -# func_check_version_match -# Ensure that we are using m4 macros, and libtool script from the same -# release of libtool. -func_check_version_match () -{ - if test "$package_revision" != "$macro_revision"; then - if test "$VERSION" != "$macro_version"; then - if test -z "$macro_version"; then - cat >&2 <<_LT_EOF -$progname: Version mismatch error. This is $PACKAGE $VERSION, but the -$progname: definition of this LT_INIT comes from an older release. -$progname: You should recreate aclocal.m4 with macros from $PACKAGE $VERSION -$progname: and run autoconf again. -_LT_EOF - else - cat >&2 <<_LT_EOF -$progname: Version mismatch error. This is $PACKAGE $VERSION, but the -$progname: definition of this LT_INIT comes from $PACKAGE $macro_version. -$progname: You should recreate aclocal.m4 with macros from $PACKAGE $VERSION -$progname: and run autoconf again. -_LT_EOF - fi - else - cat >&2 <<_LT_EOF -$progname: Version mismatch error. This is $PACKAGE $VERSION, revision $package_revision, -$progname: but the definition of this LT_INIT comes from revision $macro_revision. -$progname: You should recreate aclocal.m4 with macros from revision $package_revision -$progname: of $PACKAGE $VERSION and run autoconf again. -_LT_EOF - fi - - exit $EXIT_MISMATCH - fi -} - - -## ----------- ## -## Main. ## -## ----------- ## - -$opt_help || { - # Sanity checks first: - func_check_version_match - - if test "$build_libtool_libs" != yes && test "$build_old_libs" != yes; then - func_fatal_configuration "not configured to build any kind of library" - fi - - test -z "$mode" && func_fatal_error "error: you must specify a MODE." - - - # Darwin sucks - eval std_shrext=\"$shrext_cmds\" - - - # Only execute mode is allowed to have -dlopen flags. - if test -n "$execute_dlfiles" && test "$mode" != execute; then - func_error "unrecognized option \`-dlopen'" - $ECHO "$help" 1>&2 - exit $EXIT_FAILURE - fi - - # Change the help message to a mode-specific one. - generic_help="$help" - help="Try \`$progname --help --mode=$mode' for more information." -} - - -# func_lalib_p file -# True iff FILE is a libtool `.la' library or `.lo' object file. -# This function is only a basic sanity check; it will hardly flush out -# determined imposters. -func_lalib_p () -{ - test -f "$1" && - $SED -e 4q "$1" 2>/dev/null \ - | $GREP "^# Generated by .*$PACKAGE" > /dev/null 2>&1 -} - -# func_lalib_unsafe_p file -# True iff FILE is a libtool `.la' library or `.lo' object file. -# This function implements the same check as func_lalib_p without -# resorting to external programs. To this end, it redirects stdin and -# closes it afterwards, without saving the original file descriptor. -# As a safety measure, use it only where a negative result would be -# fatal anyway. Works if `file' does not exist. -func_lalib_unsafe_p () -{ - lalib_p=no - if test -f "$1" && test -r "$1" && exec 5<&0 <"$1"; then - for lalib_p_l in 1 2 3 4 - do - read lalib_p_line - case "$lalib_p_line" in - \#\ Generated\ by\ *$PACKAGE* ) lalib_p=yes; break;; - esac - done - exec 0<&5 5<&- - fi - test "$lalib_p" = yes -} - -# func_ltwrapper_script_p file -# True iff FILE is a libtool wrapper script -# This function is only a basic sanity check; it will hardly flush out -# determined imposters. -func_ltwrapper_script_p () -{ - func_lalib_p "$1" -} - -# func_ltwrapper_executable_p file -# True iff FILE is a libtool wrapper executable -# This function is only a basic sanity check; it will hardly flush out -# determined imposters. -func_ltwrapper_executable_p () -{ - func_ltwrapper_exec_suffix= - case $1 in - *.exe) ;; - *) func_ltwrapper_exec_suffix=.exe ;; - esac - $GREP "$magic_exe" "$1$func_ltwrapper_exec_suffix" >/dev/null 2>&1 -} - -# func_ltwrapper_scriptname file -# Assumes file is an ltwrapper_executable -# uses $file to determine the appropriate filename for a -# temporary ltwrapper_script. -func_ltwrapper_scriptname () -{ - func_ltwrapper_scriptname_result="" - if func_ltwrapper_executable_p "$1"; then - func_dirname_and_basename "$1" "" "." - func_stripname '' '.exe' "$func_basename_result" - func_ltwrapper_scriptname_result="$func_dirname_result/$objdir/${func_stripname_result}_ltshwrapper" - fi -} - -# func_ltwrapper_p file -# True iff FILE is a libtool wrapper script or wrapper executable -# This function is only a basic sanity check; it will hardly flush out -# determined imposters. -func_ltwrapper_p () -{ - func_ltwrapper_script_p "$1" || func_ltwrapper_executable_p "$1" -} - - -# func_execute_cmds commands fail_cmd -# Execute tilde-delimited COMMANDS. -# If FAIL_CMD is given, eval that upon failure. -# FAIL_CMD may read-access the current command in variable CMD! -func_execute_cmds () -{ - $opt_debug - save_ifs=$IFS; IFS='~' - for cmd in $1; do - IFS=$save_ifs - eval cmd=\"$cmd\" - func_show_eval "$cmd" "${2-:}" - done - IFS=$save_ifs -} - - -# func_source file -# Source FILE, adding directory component if necessary. -# Note that it is not necessary on cygwin/mingw to append a dot to -# FILE even if both FILE and FILE.exe exist: automatic-append-.exe -# behavior happens only for exec(3), not for open(2)! Also, sourcing -# `FILE.' does not work on cygwin managed mounts. -func_source () -{ - $opt_debug - case $1 in - */* | *\\*) . "$1" ;; - *) . "./$1" ;; - esac -} - - -# func_infer_tag arg -# Infer tagged configuration to use if any are available and -# if one wasn't chosen via the "--tag" command line option. -# Only attempt this if the compiler in the base compile -# command doesn't match the default compiler. -# arg is usually of the form 'gcc ...' -func_infer_tag () -{ - $opt_debug - if test -n "$available_tags" && test -z "$tagname"; then - CC_quoted= - for arg in $CC; do - func_quote_for_eval "$arg" - CC_quoted="$CC_quoted $func_quote_for_eval_result" - done - case $@ in - # Blanks in the command may have been stripped by the calling shell, - # but not from the CC environment variable when configure was run. - " $CC "* | "$CC "* | " `$ECHO $CC` "* | "`$ECHO $CC` "* | " $CC_quoted"* | "$CC_quoted "* | " `$ECHO $CC_quoted` "* | "`$ECHO $CC_quoted` "*) ;; - # Blanks at the start of $base_compile will cause this to fail - # if we don't check for them as well. - *) - for z in $available_tags; do - if $GREP "^# ### BEGIN LIBTOOL TAG CONFIG: $z$" < "$progpath" > /dev/null; then - # Evaluate the configuration. - eval "`${SED} -n -e '/^# ### BEGIN LIBTOOL TAG CONFIG: '$z'$/,/^# ### END LIBTOOL TAG CONFIG: '$z'$/p' < $progpath`" - CC_quoted= - for arg in $CC; do - # Double-quote args containing other shell metacharacters. - func_quote_for_eval "$arg" - CC_quoted="$CC_quoted $func_quote_for_eval_result" - done - case "$@ " in - " $CC "* | "$CC "* | " `$ECHO $CC` "* | "`$ECHO $CC` "* | " $CC_quoted"* | "$CC_quoted "* | " `$ECHO $CC_quoted` "* | "`$ECHO $CC_quoted` "*) - # The compiler in the base compile command matches - # the one in the tagged configuration. - # Assume this is the tagged configuration we want. - tagname=$z - break - ;; - esac - fi - done - # If $tagname still isn't set, then no tagged configuration - # was found and let the user know that the "--tag" command - # line option must be used. - if test -z "$tagname"; then - func_echo "unable to infer tagged configuration" - func_fatal_error "specify a tag with \`--tag'" -# else -# func_verbose "using $tagname tagged configuration" - fi - ;; - esac - fi -} - - - -# func_write_libtool_object output_name pic_name nonpic_name -# Create a libtool object file (analogous to a ".la" file), -# but don't create it if we're doing a dry run. -func_write_libtool_object () -{ - write_libobj=${1} - if test "$build_libtool_libs" = yes; then - write_lobj=\'${2}\' - else - write_lobj=none - fi - - if test "$build_old_libs" = yes; then - write_oldobj=\'${3}\' - else - write_oldobj=none - fi - - $opt_dry_run || { - cat >${write_libobj}T <<EOF -# $write_libobj - a libtool object file -# Generated by $PROGRAM (GNU $PACKAGE$TIMESTAMP) $VERSION -# -# Please DO NOT delete this file! -# It is necessary for linking the library. - -# Name of the PIC object. -pic_object=$write_lobj - -# Name of the non-PIC object -non_pic_object=$write_oldobj - -EOF - $MV "${write_libobj}T" "${write_libobj}" - } -} - -# func_mode_compile arg... -func_mode_compile () -{ - $opt_debug - # Get the compilation command and the source file. - base_compile= - srcfile="$nonopt" # always keep a non-empty value in "srcfile" - suppress_opt=yes - suppress_output= - arg_mode=normal - libobj= - later= - pie_flag= - - for arg - do - case $arg_mode in - arg ) - # do not "continue". Instead, add this to base_compile - lastarg="$arg" - arg_mode=normal - ;; - - target ) - libobj="$arg" - arg_mode=normal - continue - ;; - - normal ) - # Accept any command-line options. - case $arg in - -o) - test -n "$libobj" && \ - func_fatal_error "you cannot specify \`-o' more than once" - arg_mode=target - continue - ;; - - -pie | -fpie | -fPIE) - pie_flag="$pie_flag $arg" - continue - ;; - - -shared | -static | -prefer-pic | -prefer-non-pic) - later="$later $arg" - continue - ;; - - -no-suppress) - suppress_opt=no - continue - ;; - - -Xcompiler) - arg_mode=arg # the next one goes into the "base_compile" arg list - continue # The current "srcfile" will either be retained or - ;; # replaced later. I would guess that would be a bug. - - -Wc,*) - func_stripname '-Wc,' '' "$arg" - args=$func_stripname_result - lastarg= - save_ifs="$IFS"; IFS=',' - for arg in $args; do - IFS="$save_ifs" - func_quote_for_eval "$arg" - lastarg="$lastarg $func_quote_for_eval_result" - done - IFS="$save_ifs" - func_stripname ' ' '' "$lastarg" - lastarg=$func_stripname_result - - # Add the arguments to base_compile. - base_compile="$base_compile $lastarg" - continue - ;; - - *) - # Accept the current argument as the source file. - # The previous "srcfile" becomes the current argument. - # - lastarg="$srcfile" - srcfile="$arg" - ;; - esac # case $arg - ;; - esac # case $arg_mode - - # Aesthetically quote the previous argument. - func_quote_for_eval "$lastarg" - base_compile="$base_compile $func_quote_for_eval_result" - done # for arg - - case $arg_mode in - arg) - func_fatal_error "you must specify an argument for -Xcompile" - ;; - target) - func_fatal_error "you must specify a target with \`-o'" - ;; - *) - # Get the name of the library object. - test -z "$libobj" && { - func_basename "$srcfile" - libobj="$func_basename_result" - } - ;; - esac - - # Recognize several different file suffixes. - # If the user specifies -o file.o, it is replaced with file.lo - case $libobj in - *.[cCFSifmso] | \ - *.ada | *.adb | *.ads | *.asm | \ - *.c++ | *.cc | *.ii | *.class | *.cpp | *.cxx | \ - *.[fF][09]? | *.for | *.java | *.obj | *.sx) - func_xform "$libobj" - libobj=$func_xform_result - ;; - esac - - case $libobj in - *.lo) func_lo2o "$libobj"; obj=$func_lo2o_result ;; - *) - func_fatal_error "cannot determine name of library object from \`$libobj'" - ;; - esac - - func_infer_tag $base_compile - - for arg in $later; do - case $arg in - -shared) - test "$build_libtool_libs" != yes && \ - func_fatal_configuration "can not build a shared library" - build_old_libs=no - continue - ;; - - -static) - build_libtool_libs=no - build_old_libs=yes - continue - ;; - - -prefer-pic) - pic_mode=yes - continue - ;; - - -prefer-non-pic) - pic_mode=no - continue - ;; - esac - done - - func_quote_for_eval "$libobj" - test "X$libobj" != "X$func_quote_for_eval_result" \ - && $ECHO "X$libobj" | $GREP '[]~#^*{};<>?"'"'"' &()|`$[]' \ - && func_warning "libobj name \`$libobj' may not contain shell special characters." - func_dirname_and_basename "$obj" "/" "" - objname="$func_basename_result" - xdir="$func_dirname_result" - lobj=${xdir}$objdir/$objname - - test -z "$base_compile" && \ - func_fatal_help "you must specify a compilation command" - - # Delete any leftover library objects. - if test "$build_old_libs" = yes; then - removelist="$obj $lobj $libobj ${libobj}T" - else - removelist="$lobj $libobj ${libobj}T" - fi - - # On Cygwin there's no "real" PIC flag so we must build both object types - case $host_os in - cygwin* | mingw* | pw32* | os2* | cegcc*) - pic_mode=default - ;; - esac - if test "$pic_mode" = no && test "$deplibs_check_method" != pass_all; then - # non-PIC code in shared libraries is not supported - pic_mode=default - fi - - # Calculate the filename of the output object if compiler does - # not support -o with -c - if test "$compiler_c_o" = no; then - output_obj=`$ECHO "X$srcfile" | $Xsed -e 's%^.*/%%' -e 's%\.[^.]*$%%'`.${objext} - lockfile="$output_obj.lock" - else - output_obj= - need_locks=no - lockfile= - fi - - # Lock this critical section if it is needed - # We use this script file to make the link, it avoids creating a new file - if test "$need_locks" = yes; then - until $opt_dry_run || ln "$progpath" "$lockfile" 2>/dev/null; do - func_echo "Waiting for $lockfile to be removed" - sleep 2 - done - elif test "$need_locks" = warn; then - if test -f "$lockfile"; then - $ECHO "\ -*** ERROR, $lockfile exists and contains: -`cat $lockfile 2>/dev/null` - -This indicates that another process is trying to use the same -temporary object file, and libtool could not work around it because -your compiler does not support \`-c' and \`-o' together. If you -repeat this compilation, it may succeed, by chance, but you had better -avoid parallel builds (make -j) in this platform, or get a better -compiler." - - $opt_dry_run || $RM $removelist - exit $EXIT_FAILURE - fi - removelist="$removelist $output_obj" - $ECHO "$srcfile" > "$lockfile" - fi - - $opt_dry_run || $RM $removelist - removelist="$removelist $lockfile" - trap '$opt_dry_run || $RM $removelist; exit $EXIT_FAILURE' 1 2 15 - - if test -n "$fix_srcfile_path"; then - eval srcfile=\"$fix_srcfile_path\" - fi - func_quote_for_eval "$srcfile" - qsrcfile=$func_quote_for_eval_result - - # Only build a PIC object if we are building libtool libraries. - if test "$build_libtool_libs" = yes; then - # Without this assignment, base_compile gets emptied. - fbsd_hideous_sh_bug=$base_compile - - if test "$pic_mode" != no; then - command="$base_compile $qsrcfile $pic_flag" - else - # Don't build PIC code - command="$base_compile $qsrcfile" - fi - - func_mkdir_p "$xdir$objdir" - - if test -z "$output_obj"; then - # Place PIC objects in $objdir - command="$command -o $lobj" - fi - - func_show_eval_locale "$command" \ - 'test -n "$output_obj" && $RM $removelist; exit $EXIT_FAILURE' - - if test "$need_locks" = warn && - test "X`cat $lockfile 2>/dev/null`" != "X$srcfile"; then - $ECHO "\ -*** ERROR, $lockfile contains: -`cat $lockfile 2>/dev/null` - -but it should contain: -$srcfile - -This indicates that another process is trying to use the same -temporary object file, and libtool could not work around it because -your compiler does not support \`-c' and \`-o' together. If you -repeat this compilation, it may succeed, by chance, but you had better -avoid parallel builds (make -j) in this platform, or get a better -compiler." - - $opt_dry_run || $RM $removelist - exit $EXIT_FAILURE - fi - - # Just move the object if needed, then go on to compile the next one - if test -n "$output_obj" && test "X$output_obj" != "X$lobj"; then - func_show_eval '$MV "$output_obj" "$lobj"' \ - 'error=$?; $opt_dry_run || $RM $removelist; exit $error' - fi - - # Allow error messages only from the first compilation. - if test "$suppress_opt" = yes; then - suppress_output=' >/dev/null 2>&1' - fi - fi - - # Only build a position-dependent object if we build old libraries. - if test "$build_old_libs" = yes; then - if test "$pic_mode" != yes; then - # Don't build PIC code - command="$base_compile $qsrcfile$pie_flag" - else - command="$base_compile $qsrcfile $pic_flag" - fi - if test "$compiler_c_o" = yes; then - command="$command -o $obj" - fi - - # Suppress compiler output if we already did a PIC compilation. - command="$command$suppress_output" - func_show_eval_locale "$command" \ - '$opt_dry_run || $RM $removelist; exit $EXIT_FAILURE' - - if test "$need_locks" = warn && - test "X`cat $lockfile 2>/dev/null`" != "X$srcfile"; then - $ECHO "\ -*** ERROR, $lockfile contains: -`cat $lockfile 2>/dev/null` - -but it should contain: -$srcfile - -This indicates that another process is trying to use the same -temporary object file, and libtool could not work around it because -your compiler does not support \`-c' and \`-o' together. If you -repeat this compilation, it may succeed, by chance, but you had better -avoid parallel builds (make -j) in this platform, or get a better -compiler." - - $opt_dry_run || $RM $removelist - exit $EXIT_FAILURE - fi - - # Just move the object if needed - if test -n "$output_obj" && test "X$output_obj" != "X$obj"; then - func_show_eval '$MV "$output_obj" "$obj"' \ - 'error=$?; $opt_dry_run || $RM $removelist; exit $error' - fi - fi - - $opt_dry_run || { - func_write_libtool_object "$libobj" "$objdir/$objname" "$objname" - - # Unlock the critical section if it was locked - if test "$need_locks" != no; then - removelist=$lockfile - $RM "$lockfile" - fi - } - - exit $EXIT_SUCCESS -} - -$opt_help || { -test "$mode" = compile && func_mode_compile ${1+"$@"} -} - -func_mode_help () -{ - # We need to display help for each of the modes. - case $mode in - "") - # Generic help is extracted from the usage comments - # at the start of this file. - func_help - ;; - - clean) - $ECHO \ -"Usage: $progname [OPTION]... --mode=clean RM [RM-OPTION]... FILE... - -Remove files from the build directory. - -RM is the name of the program to use to delete files associated with each FILE -(typically \`/bin/rm'). RM-OPTIONS are options (such as \`-f') to be passed -to RM. - -If FILE is a libtool library, object or program, all the files associated -with it are deleted. Otherwise, only FILE itself is deleted using RM." - ;; - - compile) - $ECHO \ -"Usage: $progname [OPTION]... --mode=compile COMPILE-COMMAND... SOURCEFILE - -Compile a source file into a libtool library object. - -This mode accepts the following additional options: - - -o OUTPUT-FILE set the output file name to OUTPUT-FILE - -no-suppress do not suppress compiler output for multiple passes - -prefer-pic try to building PIC objects only - -prefer-non-pic try to building non-PIC objects only - -shared do not build a \`.o' file suitable for static linking - -static only build a \`.o' file suitable for static linking - -COMPILE-COMMAND is a command to be used in creating a \`standard' object file -from the given SOURCEFILE. - -The output file name is determined by removing the directory component from -SOURCEFILE, then substituting the C source code suffix \`.c' with the -library object suffix, \`.lo'." - ;; - - execute) - $ECHO \ -"Usage: $progname [OPTION]... --mode=execute COMMAND [ARGS]... - -Automatically set library path, then run a program. - -This mode accepts the following additional options: - - -dlopen FILE add the directory containing FILE to the library path - -This mode sets the library path environment variable according to \`-dlopen' -flags. - -If any of the ARGS are libtool executable wrappers, then they are translated -into their corresponding uninstalled binary, and any of their required library -directories are added to the library path. - -Then, COMMAND is executed, with ARGS as arguments." - ;; - - finish) - $ECHO \ -"Usage: $progname [OPTION]... --mode=finish [LIBDIR]... - -Complete the installation of libtool libraries. - -Each LIBDIR is a directory that contains libtool libraries. - -The commands that this mode executes may require superuser privileges. Use -the \`--dry-run' option if you just want to see what would be executed." - ;; - - install) - $ECHO \ -"Usage: $progname [OPTION]... --mode=install INSTALL-COMMAND... - -Install executables or libraries. - -INSTALL-COMMAND is the installation command. The first component should be -either the \`install' or \`cp' program. - -The following components of INSTALL-COMMAND are treated specially: - - -inst-prefix PREFIX-DIR Use PREFIX-DIR as a staging area for installation - -The rest of the components are interpreted as arguments to that command (only -BSD-compatible install options are recognized)." - ;; - - link) - $ECHO \ -"Usage: $progname [OPTION]... --mode=link LINK-COMMAND... - -Link object files or libraries together to form another library, or to -create an executable program. - -LINK-COMMAND is a command using the C compiler that you would use to create -a program from several object files. - -The following components of LINK-COMMAND are treated specially: - - -all-static do not do any dynamic linking at all - -avoid-version do not add a version suffix if possible - -dlopen FILE \`-dlpreopen' FILE if it cannot be dlopened at runtime - -dlpreopen FILE link in FILE and add its symbols to lt_preloaded_symbols - -export-dynamic allow symbols from OUTPUT-FILE to be resolved with dlsym(3) - -export-symbols SYMFILE - try to export only the symbols listed in SYMFILE - -export-symbols-regex REGEX - try to export only the symbols matching REGEX - -LLIBDIR search LIBDIR for required installed libraries - -lNAME OUTPUT-FILE requires the installed library libNAME - -module build a library that can dlopened - -no-fast-install disable the fast-install mode - -no-install link a not-installable executable - -no-undefined declare that a library does not refer to external symbols - -o OUTPUT-FILE create OUTPUT-FILE from the specified objects - -objectlist FILE Use a list of object files found in FILE to specify objects - -precious-files-regex REGEX - don't remove output files matching REGEX - -release RELEASE specify package release information - -rpath LIBDIR the created library will eventually be installed in LIBDIR - -R[ ]LIBDIR add LIBDIR to the runtime path of programs and libraries - -shared only do dynamic linking of libtool libraries - -shrext SUFFIX override the standard shared library file extension - -static do not do any dynamic linking of uninstalled libtool libraries - -static-libtool-libs - do not do any dynamic linking of libtool libraries - -version-info CURRENT[:REVISION[:AGE]] - specify library version info [each variable defaults to 0] - -weak LIBNAME declare that the target provides the LIBNAME interface - -All other options (arguments beginning with \`-') are ignored. - -Every other argument is treated as a filename. Files ending in \`.la' are -treated as uninstalled libtool libraries, other files are standard or library -object files. - -If the OUTPUT-FILE ends in \`.la', then a libtool library is created, -only library objects (\`.lo' files) may be specified, and \`-rpath' is -required, except when creating a convenience library. - -If OUTPUT-FILE ends in \`.a' or \`.lib', then a standard library is created -using \`ar' and \`ranlib', or on Windows using \`lib'. - -If OUTPUT-FILE ends in \`.lo' or \`.${objext}', then a reloadable object file -is created, otherwise an executable program is created." - ;; - - uninstall) - $ECHO \ -"Usage: $progname [OPTION]... --mode=uninstall RM [RM-OPTION]... FILE... - -Remove libraries from an installation directory. - -RM is the name of the program to use to delete files associated with each FILE -(typically \`/bin/rm'). RM-OPTIONS are options (such as \`-f') to be passed -to RM. - -If FILE is a libtool library, all the files associated with it are deleted. -Otherwise, only FILE itself is deleted using RM." - ;; - - *) - func_fatal_help "invalid operation mode \`$mode'" - ;; - esac - - $ECHO - $ECHO "Try \`$progname --help' for more information about other modes." - - exit $? -} - - # Now that we've collected a possible --mode arg, show help if necessary - $opt_help && func_mode_help - - -# func_mode_execute arg... -func_mode_execute () -{ - $opt_debug - # The first argument is the command name. - cmd="$nonopt" - test -z "$cmd" && \ - func_fatal_help "you must specify a COMMAND" - - # Handle -dlopen flags immediately. - for file in $execute_dlfiles; do - test -f "$file" \ - || func_fatal_help "\`$file' is not a file" - - dir= - case $file in - *.la) - # Check to see that this really is a libtool archive. - func_lalib_unsafe_p "$file" \ - || func_fatal_help "\`$lib' is not a valid libtool archive" - - # Read the libtool library. - dlname= - library_names= - func_source "$file" - - # Skip this library if it cannot be dlopened. - if test -z "$dlname"; then - # Warn if it was a shared library. - test -n "$library_names" && \ - func_warning "\`$file' was not linked with \`-export-dynamic'" - continue - fi - - func_dirname "$file" "" "." - dir="$func_dirname_result" - - if test -f "$dir/$objdir/$dlname"; then - dir="$dir/$objdir" - else - if test ! -f "$dir/$dlname"; then - func_fatal_error "cannot find \`$dlname' in \`$dir' or \`$dir/$objdir'" - fi - fi - ;; - - *.lo) - # Just add the directory containing the .lo file. - func_dirname "$file" "" "." - dir="$func_dirname_result" - ;; - - *) - func_warning "\`-dlopen' is ignored for non-libtool libraries and objects" - continue - ;; - esac - - # Get the absolute pathname. - absdir=`cd "$dir" && pwd` - test -n "$absdir" && dir="$absdir" - - # Now add the directory to shlibpath_var. - if eval "test -z \"\$$shlibpath_var\""; then - eval "$shlibpath_var=\"\$dir\"" - else - eval "$shlibpath_var=\"\$dir:\$$shlibpath_var\"" - fi - done - - # This variable tells wrapper scripts just to set shlibpath_var - # rather than running their programs. - libtool_execute_magic="$magic" - - # Check if any of the arguments is a wrapper script. - args= - for file - do - case $file in - -*) ;; - *) - # Do a test to see if this is really a libtool program. - if func_ltwrapper_script_p "$file"; then - func_source "$file" - # Transform arg to wrapped name. - file="$progdir/$program" - elif func_ltwrapper_executable_p "$file"; then - func_ltwrapper_scriptname "$file" - func_source "$func_ltwrapper_scriptname_result" - # Transform arg to wrapped name. - file="$progdir/$program" - fi - ;; - esac - # Quote arguments (to preserve shell metacharacters). - func_quote_for_eval "$file" - args="$args $func_quote_for_eval_result" - done - - if test "X$opt_dry_run" = Xfalse; then - if test -n "$shlibpath_var"; then - # Export the shlibpath_var. - eval "export $shlibpath_var" - fi - - # Restore saved environment variables - for lt_var in LANG LANGUAGE LC_ALL LC_CTYPE LC_COLLATE LC_MESSAGES - do - eval "if test \"\${save_$lt_var+set}\" = set; then - $lt_var=\$save_$lt_var; export $lt_var - else - $lt_unset $lt_var - fi" - done - - # Now prepare to actually exec the command. - exec_cmd="\$cmd$args" - else - # Display what would be done. - if test -n "$shlibpath_var"; then - eval "\$ECHO \"\$shlibpath_var=\$$shlibpath_var\"" - $ECHO "export $shlibpath_var" - fi - $ECHO "$cmd$args" - exit $EXIT_SUCCESS - fi -} - -test "$mode" = execute && func_mode_execute ${1+"$@"} - - -# func_mode_finish arg... -func_mode_finish () -{ - $opt_debug - libdirs="$nonopt" - admincmds= - - if test -n "$finish_cmds$finish_eval" && test -n "$libdirs"; then - for dir - do - libdirs="$libdirs $dir" - done - - for libdir in $libdirs; do - if test -n "$finish_cmds"; then - # Do each command in the finish commands. - func_execute_cmds "$finish_cmds" 'admincmds="$admincmds -'"$cmd"'"' - fi - if test -n "$finish_eval"; then - # Do the single finish_eval. - eval cmds=\"$finish_eval\" - $opt_dry_run || eval "$cmds" || admincmds="$admincmds - $cmds" - fi - done - fi - - # Exit here if they wanted silent mode. - $opt_silent && exit $EXIT_SUCCESS - - $ECHO "X----------------------------------------------------------------------" | $Xsed - $ECHO "Libraries have been installed in:" - for libdir in $libdirs; do - $ECHO " $libdir" - done - $ECHO - $ECHO "If you ever happen to want to link against installed libraries" - $ECHO "in a given directory, LIBDIR, you must either use libtool, and" - $ECHO "specify the full pathname of the library, or use the \`-LLIBDIR'" - $ECHO "flag during linking and do at least one of the following:" - if test -n "$shlibpath_var"; then - $ECHO " - add LIBDIR to the \`$shlibpath_var' environment variable" - $ECHO " during execution" - fi - if test -n "$runpath_var"; then - $ECHO " - add LIBDIR to the \`$runpath_var' environment variable" - $ECHO " during linking" - fi - if test -n "$hardcode_libdir_flag_spec"; then - libdir=LIBDIR - eval flag=\"$hardcode_libdir_flag_spec\" - - $ECHO " - use the \`$flag' linker flag" - fi - if test -n "$admincmds"; then - $ECHO " - have your system administrator run these commands:$admincmds" - fi - if test -f /etc/ld.so.conf; then - $ECHO " - have your system administrator add LIBDIR to \`/etc/ld.so.conf'" - fi - $ECHO - - $ECHO "See any operating system documentation about shared libraries for" - case $host in - solaris2.[6789]|solaris2.1[0-9]) - $ECHO "more information, such as the ld(1), crle(1) and ld.so(8) manual" - $ECHO "pages." - ;; - *) - $ECHO "more information, such as the ld(1) and ld.so(8) manual pages." - ;; - esac - $ECHO "X----------------------------------------------------------------------" | $Xsed - exit $EXIT_SUCCESS -} - -test "$mode" = finish && func_mode_finish ${1+"$@"} - - -# func_mode_install arg... -func_mode_install () -{ - $opt_debug - # There may be an optional sh(1) argument at the beginning of - # install_prog (especially on Windows NT). - if test "$nonopt" = "$SHELL" || test "$nonopt" = /bin/sh || - # Allow the use of GNU shtool's install command. - $ECHO "X$nonopt" | $GREP shtool >/dev/null; then - # Aesthetically quote it. - func_quote_for_eval "$nonopt" - install_prog="$func_quote_for_eval_result " - arg=$1 - shift - else - install_prog= - arg=$nonopt - fi - - # The real first argument should be the name of the installation program. - # Aesthetically quote it. - func_quote_for_eval "$arg" - install_prog="$install_prog$func_quote_for_eval_result" - - # We need to accept at least all the BSD install flags. - dest= - files= - opts= - prev= - install_type= - isdir=no - stripme= - for arg - do - if test -n "$dest"; then - files="$files $dest" - dest=$arg - continue - fi - - case $arg in - -d) isdir=yes ;; - -f) - case " $install_prog " in - *[\\\ /]cp\ *) ;; - *) prev=$arg ;; - esac - ;; - -g | -m | -o) - prev=$arg - ;; - -s) - stripme=" -s" - continue - ;; - -*) - ;; - *) - # If the previous option needed an argument, then skip it. - if test -n "$prev"; then - prev= - else - dest=$arg - continue - fi - ;; - esac - - # Aesthetically quote the argument. - func_quote_for_eval "$arg" - install_prog="$install_prog $func_quote_for_eval_result" - done - - test -z "$install_prog" && \ - func_fatal_help "you must specify an install program" - - test -n "$prev" && \ - func_fatal_help "the \`$prev' option requires an argument" - - if test -z "$files"; then - if test -z "$dest"; then - func_fatal_help "no file or destination specified" - else - func_fatal_help "you must specify a destination" - fi - fi - - # Strip any trailing slash from the destination. - func_stripname '' '/' "$dest" - dest=$func_stripname_result - - # Check to see that the destination is a directory. - test -d "$dest" && isdir=yes - if test "$isdir" = yes; then - destdir="$dest" - destname= - else - func_dirname_and_basename "$dest" "" "." - destdir="$func_dirname_result" - destname="$func_basename_result" - - # Not a directory, so check to see that there is only one file specified. - set dummy $files; shift - test "$#" -gt 1 && \ - func_fatal_help "\`$dest' is not a directory" - fi - case $destdir in - [\\/]* | [A-Za-z]:[\\/]*) ;; - *) - for file in $files; do - case $file in - *.lo) ;; - *) - func_fatal_help "\`$destdir' must be an absolute directory name" - ;; - esac - done - ;; - esac - - # This variable tells wrapper scripts just to set variables rather - # than running their programs. - libtool_install_magic="$magic" - - staticlibs= - future_libdirs= - current_libdirs= - for file in $files; do - - # Do each installation. - case $file in - *.$libext) - # Do the static libraries later. - staticlibs="$staticlibs $file" - ;; - - *.la) - # Check to see that this really is a libtool archive. - func_lalib_unsafe_p "$file" \ - || func_fatal_help "\`$file' is not a valid libtool archive" - - library_names= - old_library= - relink_command= - func_source "$file" - - # Add the libdir to current_libdirs if it is the destination. - if test "X$destdir" = "X$libdir"; then - case "$current_libdirs " in - *" $libdir "*) ;; - *) current_libdirs="$current_libdirs $libdir" ;; - esac - else - # Note the libdir as a future libdir. - case "$future_libdirs " in - *" $libdir "*) ;; - *) future_libdirs="$future_libdirs $libdir" ;; - esac - fi - - func_dirname "$file" "/" "" - dir="$func_dirname_result" - dir="$dir$objdir" - - if test -n "$relink_command"; then - # Determine the prefix the user has applied to our future dir. - inst_prefix_dir=`$ECHO "X$destdir" | $Xsed -e "s%$libdir\$%%"` - - # Don't allow the user to place us outside of our expected - # location b/c this prevents finding dependent libraries that - # are installed to the same prefix. - # At present, this check doesn't affect windows .dll's that - # are installed into $libdir/../bin (currently, that works fine) - # but it's something to keep an eye on. - test "$inst_prefix_dir" = "$destdir" && \ - func_fatal_error "error: cannot install \`$file' to a directory not ending in $libdir" - - if test -n "$inst_prefix_dir"; then - # Stick the inst_prefix_dir data into the link command. - relink_command=`$ECHO "X$relink_command" | $Xsed -e "s%@inst_prefix_dir@%-inst-prefix-dir $inst_prefix_dir%"` - else - relink_command=`$ECHO "X$relink_command" | $Xsed -e "s%@inst_prefix_dir@%%"` - fi - - func_warning "relinking \`$file'" - func_show_eval "$relink_command" \ - 'func_fatal_error "error: relink \`$file'\'' with the above command before installing it"' - fi - - # See the names of the shared library. - set dummy $library_names; shift - if test -n "$1"; then - realname="$1" - shift - - srcname="$realname" - test -n "$relink_command" && srcname="$realname"T - - # Install the shared library and build the symlinks. - func_show_eval "$install_prog $dir/$srcname $destdir/$realname" \ - 'exit $?' - tstripme="$stripme" - case $host_os in - cygwin* | mingw* | pw32* | cegcc*) - case $realname in - *.dll.a) - tstripme="" - ;; - esac - ;; - esac - if test -n "$tstripme" && test -n "$striplib"; then - func_show_eval "$striplib $destdir/$realname" 'exit $?' - fi - - if test "$#" -gt 0; then - # Delete the old symlinks, and create new ones. - # Try `ln -sf' first, because the `ln' binary might depend on - # the symlink we replace! Solaris /bin/ln does not understand -f, - # so we also need to try rm && ln -s. - for linkname - do - test "$linkname" != "$realname" \ - && func_show_eval "(cd $destdir && { $LN_S -f $realname $linkname || { $RM $linkname && $LN_S $realname $linkname; }; })" - done - fi - - # Do each command in the postinstall commands. - lib="$destdir/$realname" - func_execute_cmds "$postinstall_cmds" 'exit $?' - fi - - # Install the pseudo-library for information purposes. - func_basename "$file" - name="$func_basename_result" - instname="$dir/$name"i - func_show_eval "$install_prog $instname $destdir/$name" 'exit $?' - - # Maybe install the static library, too. - test -n "$old_library" && staticlibs="$staticlibs $dir/$old_library" - ;; - - *.lo) - # Install (i.e. copy) a libtool object. - - # Figure out destination file name, if it wasn't already specified. - if test -n "$destname"; then - destfile="$destdir/$destname" - else - func_basename "$file" - destfile="$func_basename_result" - destfile="$destdir/$destfile" - fi - - # Deduce the name of the destination old-style object file. - case $destfile in - *.lo) - func_lo2o "$destfile" - staticdest=$func_lo2o_result - ;; - *.$objext) - staticdest="$destfile" - destfile= - ;; - *) - func_fatal_help "cannot copy a libtool object to \`$destfile'" - ;; - esac - - # Install the libtool object if requested. - test -n "$destfile" && \ - func_show_eval "$install_prog $file $destfile" 'exit $?' - - # Install the old object if enabled. - if test "$build_old_libs" = yes; then - # Deduce the name of the old-style object file. - func_lo2o "$file" - staticobj=$func_lo2o_result - func_show_eval "$install_prog \$staticobj \$staticdest" 'exit $?' - fi - exit $EXIT_SUCCESS - ;; - - *) - # Figure out destination file name, if it wasn't already specified. - if test -n "$destname"; then - destfile="$destdir/$destname" - else - func_basename "$file" - destfile="$func_basename_result" - destfile="$destdir/$destfile" - fi - - # If the file is missing, and there is a .exe on the end, strip it - # because it is most likely a libtool script we actually want to - # install - stripped_ext="" - case $file in - *.exe) - if test ! -f "$file"; then - func_stripname '' '.exe' "$file" - file=$func_stripname_result - stripped_ext=".exe" - fi - ;; - esac - - # Do a test to see if this is really a libtool program. - case $host in - *cygwin* | *mingw*) - if func_ltwrapper_executable_p "$file"; then - func_ltwrapper_scriptname "$file" - wrapper=$func_ltwrapper_scriptname_result - else - func_stripname '' '.exe' "$file" - wrapper=$func_stripname_result - fi - ;; - *) - wrapper=$file - ;; - esac - if func_ltwrapper_script_p "$wrapper"; then - notinst_deplibs= - relink_command= - - func_source "$wrapper" - - # Check the variables that should have been set. - test -z "$generated_by_libtool_version" && \ - func_fatal_error "invalid libtool wrapper script \`$wrapper'" - - finalize=yes - for lib in $notinst_deplibs; do - # Check to see that each library is installed. - libdir= - if test -f "$lib"; then - func_source "$lib" - fi - libfile="$libdir/"`$ECHO "X$lib" | $Xsed -e 's%^.*/%%g'` ### testsuite: skip nested quoting test - if test -n "$libdir" && test ! -f "$libfile"; then - func_warning "\`$lib' has not been installed in \`$libdir'" - finalize=no - fi - done - - relink_command= - func_source "$wrapper" - - outputname= - if test "$fast_install" = no && test -n "$relink_command"; then - $opt_dry_run || { - if test "$finalize" = yes; then - tmpdir=`func_mktempdir` - func_basename "$file$stripped_ext" - file="$func_basename_result" - outputname="$tmpdir/$file" - # Replace the output file specification. - relink_command=`$ECHO "X$relink_command" | $Xsed -e 's%@OUTPUT@%'"$outputname"'%g'` - - $opt_silent || { - func_quote_for_expand "$relink_command" - eval "func_echo $func_quote_for_expand_result" - } - if eval "$relink_command"; then : - else - func_error "error: relink \`$file' with the above command before installing it" - $opt_dry_run || ${RM}r "$tmpdir" - continue - fi - file="$outputname" - else - func_warning "cannot relink \`$file'" - fi - } - else - # Install the binary that we compiled earlier. - file=`$ECHO "X$file$stripped_ext" | $Xsed -e "s%\([^/]*\)$%$objdir/\1%"` - fi - fi - - # remove .exe since cygwin /usr/bin/install will append another - # one anyway - case $install_prog,$host in - */usr/bin/install*,*cygwin*) - case $file:$destfile in - *.exe:*.exe) - # this is ok - ;; - *.exe:*) - destfile=$destfile.exe - ;; - *:*.exe) - func_stripname '' '.exe' "$destfile" - destfile=$func_stripname_result - ;; - esac - ;; - esac - func_show_eval "$install_prog\$stripme \$file \$destfile" 'exit $?' - $opt_dry_run || if test -n "$outputname"; then - ${RM}r "$tmpdir" - fi - ;; - esac - done - - for file in $staticlibs; do - func_basename "$file" - name="$func_basename_result" - - # Set up the ranlib parameters. - oldlib="$destdir/$name" - - func_show_eval "$install_prog \$file \$oldlib" 'exit $?' - - if test -n "$stripme" && test -n "$old_striplib"; then - func_show_eval "$old_striplib $oldlib" 'exit $?' - fi - - # Do each command in the postinstall commands. - func_execute_cmds "$old_postinstall_cmds" 'exit $?' - done - - test -n "$future_libdirs" && \ - func_warning "remember to run \`$progname --finish$future_libdirs'" - - if test -n "$current_libdirs"; then - # Maybe just do a dry run. - $opt_dry_run && current_libdirs=" -n$current_libdirs" - exec_cmd='$SHELL $progpath $preserve_args --finish$current_libdirs' - else - exit $EXIT_SUCCESS - fi -} - -test "$mode" = install && func_mode_install ${1+"$@"} - - -# func_generate_dlsyms outputname originator pic_p -# Extract symbols from dlprefiles and create ${outputname}S.o with -# a dlpreopen symbol table. -func_generate_dlsyms () -{ - $opt_debug - my_outputname="$1" - my_originator="$2" - my_pic_p="${3-no}" - my_prefix=`$ECHO "$my_originator" | sed 's%[^a-zA-Z0-9]%_%g'` - my_dlsyms= - - if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then - if test -n "$NM" && test -n "$global_symbol_pipe"; then - my_dlsyms="${my_outputname}S.c" - else - func_error "not configured to extract global symbols from dlpreopened files" - fi - fi - - if test -n "$my_dlsyms"; then - case $my_dlsyms in - "") ;; - *.c) - # Discover the nlist of each of the dlfiles. - nlist="$output_objdir/${my_outputname}.nm" - - func_show_eval "$RM $nlist ${nlist}S ${nlist}T" - - # Parse the name list into a source file. - func_verbose "creating $output_objdir/$my_dlsyms" - - $opt_dry_run || $ECHO > "$output_objdir/$my_dlsyms" "\ -/* $my_dlsyms - symbol resolution table for \`$my_outputname' dlsym emulation. */ -/* Generated by $PROGRAM (GNU $PACKAGE$TIMESTAMP) $VERSION */ - -#ifdef __cplusplus -extern \"C\" { -#endif - -/* External symbol declarations for the compiler. */\ -" - - if test "$dlself" = yes; then - func_verbose "generating symbol list for \`$output'" - - $opt_dry_run || echo ': @PROGRAM@ ' > "$nlist" - - # Add our own program objects to the symbol list. - progfiles=`$ECHO "X$objs$old_deplibs" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP` - for progfile in $progfiles; do - func_verbose "extracting global C symbols from \`$progfile'" - $opt_dry_run || eval "$NM $progfile | $global_symbol_pipe >> '$nlist'" - done - - if test -n "$exclude_expsyms"; then - $opt_dry_run || { - eval '$EGREP -v " ($exclude_expsyms)$" "$nlist" > "$nlist"T' - eval '$MV "$nlist"T "$nlist"' - } - fi - - if test -n "$export_symbols_regex"; then - $opt_dry_run || { - eval '$EGREP -e "$export_symbols_regex" "$nlist" > "$nlist"T' - eval '$MV "$nlist"T "$nlist"' - } - fi - - # Prepare the list of exported symbols - if test -z "$export_symbols"; then - export_symbols="$output_objdir/$outputname.exp" - $opt_dry_run || { - $RM $export_symbols - eval "${SED} -n -e '/^: @PROGRAM@ $/d' -e 's/^.* \(.*\)$/\1/p' "'< "$nlist" > "$export_symbols"' - case $host in - *cygwin* | *mingw* | *cegcc* ) - eval "echo EXPORTS "'> "$output_objdir/$outputname.def"' - eval 'cat "$export_symbols" >> "$output_objdir/$outputname.def"' - ;; - esac - } - else - $opt_dry_run || { - eval "${SED} -e 's/\([].[*^$]\)/\\\\\1/g' -e 's/^/ /' -e 's/$/$/'"' < "$export_symbols" > "$output_objdir/$outputname.exp"' - eval '$GREP -f "$output_objdir/$outputname.exp" < "$nlist" > "$nlist"T' - eval '$MV "$nlist"T "$nlist"' - case $host in - *cygwin | *mingw* | *cegcc* ) - eval "echo EXPORTS "'> "$output_objdir/$outputname.def"' - eval 'cat "$nlist" >> "$output_objdir/$outputname.def"' - ;; - esac - } - fi - fi - - for dlprefile in $dlprefiles; do - func_verbose "extracting global C symbols from \`$dlprefile'" - func_basename "$dlprefile" - name="$func_basename_result" - $opt_dry_run || { - eval '$ECHO ": $name " >> "$nlist"' - eval "$NM $dlprefile 2>/dev/null | $global_symbol_pipe >> '$nlist'" - } - done - - $opt_dry_run || { - # Make sure we have at least an empty file. - test -f "$nlist" || : > "$nlist" - - if test -n "$exclude_expsyms"; then - $EGREP -v " ($exclude_expsyms)$" "$nlist" > "$nlist"T - $MV "$nlist"T "$nlist" - fi - - # Try sorting and uniquifying the output. - if $GREP -v "^: " < "$nlist" | - if sort -k 3 </dev/null >/dev/null 2>&1; then - sort -k 3 - else - sort +2 - fi | - uniq > "$nlist"S; then - : - else - $GREP -v "^: " < "$nlist" > "$nlist"S - fi - - if test -f "$nlist"S; then - eval "$global_symbol_to_cdecl"' < "$nlist"S >> "$output_objdir/$my_dlsyms"' - else - $ECHO '/* NONE */' >> "$output_objdir/$my_dlsyms" - fi - - $ECHO >> "$output_objdir/$my_dlsyms" "\ - -/* The mapping between symbol names and symbols. */ -typedef struct { - const char *name; - void *address; -} lt_dlsymlist; -" - case $host in - *cygwin* | *mingw* | *cegcc* ) - $ECHO >> "$output_objdir/$my_dlsyms" "\ -/* DATA imports from DLLs on WIN32 con't be const, because - runtime relocations are performed -- see ld's documentation - on pseudo-relocs. */" - lt_dlsym_const= ;; - *osf5*) - echo >> "$output_objdir/$my_dlsyms" "\ -/* This system does not cope well with relocations in const data */" - lt_dlsym_const= ;; - *) - lt_dlsym_const=const ;; - esac - - $ECHO >> "$output_objdir/$my_dlsyms" "\ -extern $lt_dlsym_const lt_dlsymlist -lt_${my_prefix}_LTX_preloaded_symbols[]; -$lt_dlsym_const lt_dlsymlist -lt_${my_prefix}_LTX_preloaded_symbols[] = -{\ - { \"$my_originator\", (void *) 0 }," - - case $need_lib_prefix in - no) - eval "$global_symbol_to_c_name_address" < "$nlist" >> "$output_objdir/$my_dlsyms" - ;; - *) - eval "$global_symbol_to_c_name_address_lib_prefix" < "$nlist" >> "$output_objdir/$my_dlsyms" - ;; - esac - $ECHO >> "$output_objdir/$my_dlsyms" "\ - {0, (void *) 0} -}; - -/* This works around a problem in FreeBSD linker */ -#ifdef FREEBSD_WORKAROUND -static const void *lt_preloaded_setup() { - return lt_${my_prefix}_LTX_preloaded_symbols; -} -#endif - -#ifdef __cplusplus -} -#endif\ -" - } # !$opt_dry_run - - pic_flag_for_symtable= - case "$compile_command " in - *" -static "*) ;; - *) - case $host in - # compiling the symbol table file with pic_flag works around - # a FreeBSD bug that causes programs to crash when -lm is - # linked before any other PIC object. But we must not use - # pic_flag when linking with -static. The problem exists in - # FreeBSD 2.2.6 and is fixed in FreeBSD 3.1. - *-*-freebsd2*|*-*-freebsd3.0*|*-*-freebsdelf3.0*) - pic_flag_for_symtable=" $pic_flag -DFREEBSD_WORKAROUND" ;; - *-*-hpux*) - pic_flag_for_symtable=" $pic_flag" ;; - *) - if test "X$my_pic_p" != Xno; then - pic_flag_for_symtable=" $pic_flag" - fi - ;; - esac - ;; - esac - symtab_cflags= - for arg in $LTCFLAGS; do - case $arg in - -pie | -fpie | -fPIE) ;; - *) symtab_cflags="$symtab_cflags $arg" ;; - esac - done - - # Now compile the dynamic symbol file. - func_show_eval '(cd $output_objdir && $LTCC$symtab_cflags -c$no_builtin_flag$pic_flag_for_symtable "$my_dlsyms")' 'exit $?' - - # Clean up the generated files. - func_show_eval '$RM "$output_objdir/$my_dlsyms" "$nlist" "${nlist}S" "${nlist}T"' - - # Transform the symbol file into the correct name. - symfileobj="$output_objdir/${my_outputname}S.$objext" - case $host in - *cygwin* | *mingw* | *cegcc* ) - if test -f "$output_objdir/$my_outputname.def"; then - compile_command=`$ECHO "X$compile_command" | $Xsed -e "s%@SYMFILE@%$output_objdir/$my_outputname.def $symfileobj%"` - finalize_command=`$ECHO "X$finalize_command" | $Xsed -e "s%@SYMFILE@%$output_objdir/$my_outputname.def $symfileobj%"` - else - compile_command=`$ECHO "X$compile_command" | $Xsed -e "s%@SYMFILE@%$symfileobj%"` - finalize_command=`$ECHO "X$finalize_command" | $Xsed -e "s%@SYMFILE@%$symfileobj%"` - fi - ;; - *) - compile_command=`$ECHO "X$compile_command" | $Xsed -e "s%@SYMFILE@%$symfileobj%"` - finalize_command=`$ECHO "X$finalize_command" | $Xsed -e "s%@SYMFILE@%$symfileobj%"` - ;; - esac - ;; - *) - func_fatal_error "unknown suffix for \`$my_dlsyms'" - ;; - esac - else - # We keep going just in case the user didn't refer to - # lt_preloaded_symbols. The linker will fail if global_symbol_pipe - # really was required. - - # Nullify the symbol file. - compile_command=`$ECHO "X$compile_command" | $Xsed -e "s% @SYMFILE@%%"` - finalize_command=`$ECHO "X$finalize_command" | $Xsed -e "s% @SYMFILE@%%"` - fi -} - -# func_win32_libid arg -# return the library type of file 'arg' -# -# Need a lot of goo to handle *both* DLLs and import libs -# Has to be a shell function in order to 'eat' the argument -# that is supplied when $file_magic_command is called. -func_win32_libid () -{ - $opt_debug - win32_libid_type="unknown" - win32_fileres=`file -L $1 2>/dev/null` - case $win32_fileres in - *ar\ archive\ import\ library*) # definitely import - win32_libid_type="x86 archive import" - ;; - *ar\ archive*) # could be an import, or static - if eval $OBJDUMP -f $1 | $SED -e '10q' 2>/dev/null | - $EGREP 'file format pe-i386(.*architecture: i386)?' >/dev/null ; then - win32_nmres=`eval $NM -f posix -A $1 | - $SED -n -e ' - 1,100{ - / I /{ - s,.*,import, - p - q - } - }'` - case $win32_nmres in - import*) win32_libid_type="x86 archive import";; - *) win32_libid_type="x86 archive static";; - esac - fi - ;; - *DLL*) - win32_libid_type="x86 DLL" - ;; - *executable*) # but shell scripts are "executable" too... - case $win32_fileres in - *MS\ Windows\ PE\ Intel*) - win32_libid_type="x86 DLL" - ;; - esac - ;; - esac - $ECHO "$win32_libid_type" -} - - - -# func_extract_an_archive dir oldlib -func_extract_an_archive () -{ - $opt_debug - f_ex_an_ar_dir="$1"; shift - f_ex_an_ar_oldlib="$1" - func_show_eval "(cd \$f_ex_an_ar_dir && $AR x \"\$f_ex_an_ar_oldlib\")" 'exit $?' - if ($AR t "$f_ex_an_ar_oldlib" | sort | sort -uc >/dev/null 2>&1); then - : - else - func_fatal_error "object name conflicts in archive: $f_ex_an_ar_dir/$f_ex_an_ar_oldlib" - fi -} - - -# func_extract_archives gentop oldlib ... -func_extract_archives () -{ - $opt_debug - my_gentop="$1"; shift - my_oldlibs=${1+"$@"} - my_oldobjs="" - my_xlib="" - my_xabs="" - my_xdir="" - - for my_xlib in $my_oldlibs; do - # Extract the objects. - case $my_xlib in - [\\/]* | [A-Za-z]:[\\/]*) my_xabs="$my_xlib" ;; - *) my_xabs=`pwd`"/$my_xlib" ;; - esac - func_basename "$my_xlib" - my_xlib="$func_basename_result" - my_xlib_u=$my_xlib - while :; do - case " $extracted_archives " in - *" $my_xlib_u "*) - func_arith $extracted_serial + 1 - extracted_serial=$func_arith_result - my_xlib_u=lt$extracted_serial-$my_xlib ;; - *) break ;; - esac - done - extracted_archives="$extracted_archives $my_xlib_u" - my_xdir="$my_gentop/$my_xlib_u" - - func_mkdir_p "$my_xdir" - - case $host in - *-darwin*) - func_verbose "Extracting $my_xabs" - # Do not bother doing anything if just a dry run - $opt_dry_run || { - darwin_orig_dir=`pwd` - cd $my_xdir || exit $? - darwin_archive=$my_xabs - darwin_curdir=`pwd` - darwin_base_archive=`basename "$darwin_archive"` - darwin_arches=`$LIPO -info "$darwin_archive" 2>/dev/null | $GREP Architectures 2>/dev/null || true` - if test -n "$darwin_arches"; then - darwin_arches=`$ECHO "$darwin_arches" | $SED -e 's/.*are://'` - darwin_arch= - func_verbose "$darwin_base_archive has multiple architectures $darwin_arches" - for darwin_arch in $darwin_arches ; do - func_mkdir_p "unfat-$$/${darwin_base_archive}-${darwin_arch}" - $LIPO -thin $darwin_arch -output "unfat-$$/${darwin_base_archive}-${darwin_arch}/${darwin_base_archive}" "${darwin_archive}" - cd "unfat-$$/${darwin_base_archive}-${darwin_arch}" - func_extract_an_archive "`pwd`" "${darwin_base_archive}" - cd "$darwin_curdir" - $RM "unfat-$$/${darwin_base_archive}-${darwin_arch}/${darwin_base_archive}" - done # $darwin_arches - ## Okay now we've a bunch of thin objects, gotta fatten them up :) - darwin_filelist=`find unfat-$$ -type f -name \*.o -print -o -name \*.lo -print | $SED -e "$basename" | sort -u` - darwin_file= - darwin_files= - for darwin_file in $darwin_filelist; do - darwin_files=`find unfat-$$ -name $darwin_file -print | $NL2SP` - $LIPO -create -output "$darwin_file" $darwin_files - done # $darwin_filelist - $RM -rf unfat-$$ - cd "$darwin_orig_dir" - else - cd $darwin_orig_dir - func_extract_an_archive "$my_xdir" "$my_xabs" - fi # $darwin_arches - } # !$opt_dry_run - ;; - *) - func_extract_an_archive "$my_xdir" "$my_xabs" - ;; - esac - my_oldobjs="$my_oldobjs "`find $my_xdir -name \*.$objext -print -o -name \*.lo -print | $NL2SP` - done - - func_extract_archives_result="$my_oldobjs" -} - - - -# func_emit_wrapper_part1 [arg=no] -# -# Emit the first part of a libtool wrapper script on stdout. -# For more information, see the description associated with -# func_emit_wrapper(), below. -func_emit_wrapper_part1 () -{ - func_emit_wrapper_part1_arg1=no - if test -n "$1" ; then - func_emit_wrapper_part1_arg1=$1 - fi - - $ECHO "\ -#! $SHELL - -# $output - temporary wrapper script for $objdir/$outputname -# Generated by $PROGRAM (GNU $PACKAGE$TIMESTAMP) $VERSION -# -# The $output program cannot be directly executed until all the libtool -# libraries that it depends on are installed. -# -# This wrapper script should never be moved out of the build directory. -# If it is, it will not operate correctly. - -# Sed substitution that helps us do robust quoting. It backslashifies -# metacharacters that are still active within double-quoted strings. -Xsed='${SED} -e 1s/^X//' -sed_quote_subst='$sed_quote_subst' - -# Be Bourne compatible -if test -n \"\${ZSH_VERSION+set}\" && (emulate sh) >/dev/null 2>&1; then - emulate sh - NULLCMD=: - # Zsh 3.x and 4.x performs word splitting on \${1+\"\$@\"}, which - # is contrary to our usage. Disable this feature. - alias -g '\${1+\"\$@\"}'='\"\$@\"' - setopt NO_GLOB_SUBST -else - case \`(set -o) 2>/dev/null\` in *posix*) set -o posix;; esac -fi -BIN_SH=xpg4; export BIN_SH # for Tru64 -DUALCASE=1; export DUALCASE # for MKS sh - -# The HP-UX ksh and POSIX shell print the target directory to stdout -# if CDPATH is set. -(unset CDPATH) >/dev/null 2>&1 && unset CDPATH - -relink_command=\"$relink_command\" - -# This environment variable determines our operation mode. -if test \"\$libtool_install_magic\" = \"$magic\"; then - # install mode needs the following variables: - generated_by_libtool_version='$macro_version' - notinst_deplibs='$notinst_deplibs' -else - # When we are sourced in execute mode, \$file and \$ECHO are already set. - if test \"\$libtool_execute_magic\" != \"$magic\"; then - ECHO=\"$qecho\" - file=\"\$0\" - # Make sure echo works. - if test \"X\$1\" = X--no-reexec; then - # Discard the --no-reexec flag, and continue. - shift - elif test \"X\`{ \$ECHO '\t'; } 2>/dev/null\`\" = 'X\t'; then - # Yippee, \$ECHO works! - : - else - # Restart under the correct shell, and then maybe \$ECHO will work. - exec $SHELL \"\$0\" --no-reexec \${1+\"\$@\"} - fi - fi\ -" - $ECHO "\ - - # Find the directory that this script lives in. - thisdir=\`\$ECHO \"X\$file\" | \$Xsed -e 's%/[^/]*$%%'\` - test \"x\$thisdir\" = \"x\$file\" && thisdir=. - - # Follow symbolic links until we get to the real thisdir. - file=\`ls -ld \"\$file\" | ${SED} -n 's/.*-> //p'\` - while test -n \"\$file\"; do - destdir=\`\$ECHO \"X\$file\" | \$Xsed -e 's%/[^/]*\$%%'\` - - # If there was a directory component, then change thisdir. - if test \"x\$destdir\" != \"x\$file\"; then - case \"\$destdir\" in - [\\\\/]* | [A-Za-z]:[\\\\/]*) thisdir=\"\$destdir\" ;; - *) thisdir=\"\$thisdir/\$destdir\" ;; - esac - fi - - file=\`\$ECHO \"X\$file\" | \$Xsed -e 's%^.*/%%'\` - file=\`ls -ld \"\$thisdir/\$file\" | ${SED} -n 's/.*-> //p'\` - done -" -} -# end: func_emit_wrapper_part1 - -# func_emit_wrapper_part2 [arg=no] -# -# Emit the second part of a libtool wrapper script on stdout. -# For more information, see the description associated with -# func_emit_wrapper(), below. -func_emit_wrapper_part2 () -{ - func_emit_wrapper_part2_arg1=no - if test -n "$1" ; then - func_emit_wrapper_part2_arg1=$1 - fi - - $ECHO "\ - - # Usually 'no', except on cygwin/mingw when embedded into - # the cwrapper. - WRAPPER_SCRIPT_BELONGS_IN_OBJDIR=$func_emit_wrapper_part2_arg1 - if test \"\$WRAPPER_SCRIPT_BELONGS_IN_OBJDIR\" = \"yes\"; then - # special case for '.' - if test \"\$thisdir\" = \".\"; then - thisdir=\`pwd\` - fi - # remove .libs from thisdir - case \"\$thisdir\" in - *[\\\\/]$objdir ) thisdir=\`\$ECHO \"X\$thisdir\" | \$Xsed -e 's%[\\\\/][^\\\\/]*$%%'\` ;; - $objdir ) thisdir=. ;; - esac - fi - - # Try to get the absolute directory name. - absdir=\`cd \"\$thisdir\" && pwd\` - test -n \"\$absdir\" && thisdir=\"\$absdir\" -" - - if test "$fast_install" = yes; then - $ECHO "\ - program=lt-'$outputname'$exeext - progdir=\"\$thisdir/$objdir\" - - if test ! -f \"\$progdir/\$program\" || - { file=\`ls -1dt \"\$progdir/\$program\" \"\$progdir/../\$program\" 2>/dev/null | ${SED} 1q\`; \\ - test \"X\$file\" != \"X\$progdir/\$program\"; }; then - - file=\"\$\$-\$program\" - - if test ! -d \"\$progdir\"; then - $MKDIR \"\$progdir\" - else - $RM \"\$progdir/\$file\" - fi" - - $ECHO "\ - - # relink executable if necessary - if test -n \"\$relink_command\"; then - if relink_command_output=\`eval \$relink_command 2>&1\`; then : - else - $ECHO \"\$relink_command_output\" >&2 - $RM \"\$progdir/\$file\" - exit 1 - fi - fi - - $MV \"\$progdir/\$file\" \"\$progdir/\$program\" 2>/dev/null || - { $RM \"\$progdir/\$program\"; - $MV \"\$progdir/\$file\" \"\$progdir/\$program\"; } - $RM \"\$progdir/\$file\" - fi" - else - $ECHO "\ - program='$outputname' - progdir=\"\$thisdir/$objdir\" -" - fi - - $ECHO "\ - - if test -f \"\$progdir/\$program\"; then" - - # Export our shlibpath_var if we have one. - if test "$shlibpath_overrides_runpath" = yes && test -n "$shlibpath_var" && test -n "$temp_rpath"; then - $ECHO "\ - # Add our own library path to $shlibpath_var - $shlibpath_var=\"$temp_rpath\$$shlibpath_var\" - - # Some systems cannot cope with colon-terminated $shlibpath_var - # The second colon is a workaround for a bug in BeOS R4 sed - $shlibpath_var=\`\$ECHO \"X\$$shlibpath_var\" | \$Xsed -e 's/::*\$//'\` - - export $shlibpath_var -" - fi - - # fixup the dll searchpath if we need to. - if test -n "$dllsearchpath"; then - $ECHO "\ - # Add the dll search path components to the executable PATH - PATH=$dllsearchpath:\$PATH -" - fi - - $ECHO "\ - if test \"\$libtool_execute_magic\" != \"$magic\"; then - # Run the actual program with our arguments. -" - case $host in - # Backslashes separate directories on plain windows - *-*-mingw | *-*-os2* | *-cegcc*) - $ECHO "\ - exec \"\$progdir\\\\\$program\" \${1+\"\$@\"} -" - ;; - - *) - $ECHO "\ - exec \"\$progdir/\$program\" \${1+\"\$@\"} -" - ;; - esac - $ECHO "\ - \$ECHO \"\$0: cannot exec \$program \$*\" 1>&2 - exit 1 - fi - else - # The program doesn't exist. - \$ECHO \"\$0: error: \\\`\$progdir/\$program' does not exist\" 1>&2 - \$ECHO \"This script is just a wrapper for \$program.\" 1>&2 - $ECHO \"See the $PACKAGE documentation for more information.\" 1>&2 - exit 1 - fi -fi\ -" -} -# end: func_emit_wrapper_part2 - - -# func_emit_wrapper [arg=no] -# -# Emit a libtool wrapper script on stdout. -# Don't directly open a file because we may want to -# incorporate the script contents within a cygwin/mingw -# wrapper executable. Must ONLY be called from within -# func_mode_link because it depends on a number of variables -# set therein. -# -# ARG is the value that the WRAPPER_SCRIPT_BELONGS_IN_OBJDIR -# variable will take. If 'yes', then the emitted script -# will assume that the directory in which it is stored is -# the $objdir directory. This is a cygwin/mingw-specific -# behavior. -func_emit_wrapper () -{ - func_emit_wrapper_arg1=no - if test -n "$1" ; then - func_emit_wrapper_arg1=$1 - fi - - # split this up so that func_emit_cwrapperexe_src - # can call each part independently. - func_emit_wrapper_part1 "${func_emit_wrapper_arg1}" - func_emit_wrapper_part2 "${func_emit_wrapper_arg1}" -} - - -# func_to_host_path arg -# -# Convert paths to host format when used with build tools. -# Intended for use with "native" mingw (where libtool itself -# is running under the msys shell), or in the following cross- -# build environments: -# $build $host -# mingw (msys) mingw [e.g. native] -# cygwin mingw -# *nix + wine mingw -# where wine is equipped with the `winepath' executable. -# In the native mingw case, the (msys) shell automatically -# converts paths for any non-msys applications it launches, -# but that facility isn't available from inside the cwrapper. -# Similar accommodations are necessary for $host mingw and -# $build cygwin. Calling this function does no harm for other -# $host/$build combinations not listed above. -# -# ARG is the path (on $build) that should be converted to -# the proper representation for $host. The result is stored -# in $func_to_host_path_result. -func_to_host_path () -{ - func_to_host_path_result="$1" - if test -n "$1" ; then - case $host in - *mingw* ) - lt_sed_naive_backslashify='s|\\\\*|\\|g;s|/|\\|g;s|\\|\\\\|g' - case $build in - *mingw* ) # actually, msys - # awkward: cmd appends spaces to result - lt_sed_strip_trailing_spaces="s/[ ]*\$//" - func_to_host_path_tmp1=`( cmd //c echo "$1" |\ - $SED -e "$lt_sed_strip_trailing_spaces" ) 2>/dev/null || echo ""` - func_to_host_path_result=`echo "$func_to_host_path_tmp1" |\ - $SED -e "$lt_sed_naive_backslashify"` - ;; - *cygwin* ) - func_to_host_path_tmp1=`cygpath -w "$1"` - func_to_host_path_result=`echo "$func_to_host_path_tmp1" |\ - $SED -e "$lt_sed_naive_backslashify"` - ;; - * ) - # Unfortunately, winepath does not exit with a non-zero - # error code, so we are forced to check the contents of - # stdout. On the other hand, if the command is not - # found, the shell will set an exit code of 127 and print - # *an error message* to stdout. So we must check for both - # error code of zero AND non-empty stdout, which explains - # the odd construction: - func_to_host_path_tmp1=`winepath -w "$1" 2>/dev/null` - if test "$?" -eq 0 && test -n "${func_to_host_path_tmp1}"; then - func_to_host_path_result=`echo "$func_to_host_path_tmp1" |\ - $SED -e "$lt_sed_naive_backslashify"` - else - # Allow warning below. - func_to_host_path_result="" - fi - ;; - esac - if test -z "$func_to_host_path_result" ; then - func_error "Could not determine host path corresponding to" - func_error " '$1'" - func_error "Continuing, but uninstalled executables may not work." - # Fallback: - func_to_host_path_result="$1" - fi - ;; - esac - fi -} -# end: func_to_host_path - -# func_to_host_pathlist arg -# -# Convert pathlists to host format when used with build tools. -# See func_to_host_path(), above. This function supports the -# following $build/$host combinations (but does no harm for -# combinations not listed here): -# $build $host -# mingw (msys) mingw [e.g. native] -# cygwin mingw -# *nix + wine mingw -# -# Path separators are also converted from $build format to -# $host format. If ARG begins or ends with a path separator -# character, it is preserved (but converted to $host format) -# on output. -# -# ARG is a pathlist (on $build) that should be converted to -# the proper representation on $host. The result is stored -# in $func_to_host_pathlist_result. -func_to_host_pathlist () -{ - func_to_host_pathlist_result="$1" - if test -n "$1" ; then - case $host in - *mingw* ) - lt_sed_naive_backslashify='s|\\\\*|\\|g;s|/|\\|g;s|\\|\\\\|g' - # Remove leading and trailing path separator characters from - # ARG. msys behavior is inconsistent here, cygpath turns them - # into '.;' and ';.', and winepath ignores them completely. - func_to_host_pathlist_tmp2="$1" - # Once set for this call, this variable should not be - # reassigned. It is used in tha fallback case. - func_to_host_pathlist_tmp1=`echo "$func_to_host_pathlist_tmp2" |\ - $SED -e 's|^:*||' -e 's|:*$||'` - case $build in - *mingw* ) # Actually, msys. - # Awkward: cmd appends spaces to result. - lt_sed_strip_trailing_spaces="s/[ ]*\$//" - func_to_host_pathlist_tmp2=`( cmd //c echo "$func_to_host_pathlist_tmp1" |\ - $SED -e "$lt_sed_strip_trailing_spaces" ) 2>/dev/null || echo ""` - func_to_host_pathlist_result=`echo "$func_to_host_pathlist_tmp2" |\ - $SED -e "$lt_sed_naive_backslashify"` - ;; - *cygwin* ) - func_to_host_pathlist_tmp2=`cygpath -w -p "$func_to_host_pathlist_tmp1"` - func_to_host_pathlist_result=`echo "$func_to_host_pathlist_tmp2" |\ - $SED -e "$lt_sed_naive_backslashify"` - ;; - * ) - # unfortunately, winepath doesn't convert pathlists - func_to_host_pathlist_result="" - func_to_host_pathlist_oldIFS=$IFS - IFS=: - for func_to_host_pathlist_f in $func_to_host_pathlist_tmp1 ; do - IFS=$func_to_host_pathlist_oldIFS - if test -n "$func_to_host_pathlist_f" ; then - func_to_host_path "$func_to_host_pathlist_f" - if test -n "$func_to_host_path_result" ; then - if test -z "$func_to_host_pathlist_result" ; then - func_to_host_pathlist_result="$func_to_host_path_result" - else - func_to_host_pathlist_result="$func_to_host_pathlist_result;$func_to_host_path_result" - fi - fi - fi - IFS=: - done - IFS=$func_to_host_pathlist_oldIFS - ;; - esac - if test -z "$func_to_host_pathlist_result" ; then - func_error "Could not determine the host path(s) corresponding to" - func_error " '$1'" - func_error "Continuing, but uninstalled executables may not work." - # Fallback. This may break if $1 contains DOS-style drive - # specifications. The fix is not to complicate the expression - # below, but for the user to provide a working wine installation - # with winepath so that path translation in the cross-to-mingw - # case works properly. - lt_replace_pathsep_nix_to_dos="s|:|;|g" - func_to_host_pathlist_result=`echo "$func_to_host_pathlist_tmp1" |\ - $SED -e "$lt_replace_pathsep_nix_to_dos"` - fi - # Now, add the leading and trailing path separators back - case "$1" in - :* ) func_to_host_pathlist_result=";$func_to_host_pathlist_result" - ;; - esac - case "$1" in - *: ) func_to_host_pathlist_result="$func_to_host_pathlist_result;" - ;; - esac - ;; - esac - fi -} -# end: func_to_host_pathlist - -# func_emit_cwrapperexe_src -# emit the source code for a wrapper executable on stdout -# Must ONLY be called from within func_mode_link because -# it depends on a number of variable set therein. -func_emit_cwrapperexe_src () -{ - cat <<EOF - -/* $cwrappersource - temporary wrapper executable for $objdir/$outputname - Generated by $PROGRAM (GNU $PACKAGE$TIMESTAMP) $VERSION - - The $output program cannot be directly executed until all the libtool - libraries that it depends on are installed. - - This wrapper executable should never be moved out of the build directory. - If it is, it will not operate correctly. - - Currently, it simply execs the wrapper *script* "$SHELL $output", - but could eventually absorb all of the scripts functionality and - exec $objdir/$outputname directly. -*/ -EOF - cat <<"EOF" -#include <stdio.h> -#include <stdlib.h> -#ifdef _MSC_VER -# include <direct.h> -# include <process.h> -# include <io.h> -# define setmode _setmode -#else -# include <unistd.h> -# include <stdint.h> -# ifdef __CYGWIN__ -# include <io.h> -# define HAVE_SETENV -# ifdef __STRICT_ANSI__ -char *realpath (const char *, char *); -int putenv (char *); -int setenv (const char *, const char *, int); -# endif -# endif -#endif -#include <malloc.h> -#include <stdarg.h> -#include <assert.h> -#include <string.h> -#include <ctype.h> -#include <errno.h> -#include <fcntl.h> -#include <sys/stat.h> - -#if defined(PATH_MAX) -# define LT_PATHMAX PATH_MAX -#elif defined(MAXPATHLEN) -# define LT_PATHMAX MAXPATHLEN -#else -# define LT_PATHMAX 1024 -#endif - -#ifndef S_IXOTH -# define S_IXOTH 0 -#endif -#ifndef S_IXGRP -# define S_IXGRP 0 -#endif - -#ifdef _MSC_VER -# define S_IXUSR _S_IEXEC -# define stat _stat -# ifndef _INTPTR_T_DEFINED -# define intptr_t int -# endif -#endif - -#ifndef DIR_SEPARATOR -# define DIR_SEPARATOR '/' -# define PATH_SEPARATOR ':' -#endif - -#if defined (_WIN32) || defined (__MSDOS__) || defined (__DJGPP__) || \ - defined (__OS2__) -# define HAVE_DOS_BASED_FILE_SYSTEM -# define FOPEN_WB "wb" -# ifndef DIR_SEPARATOR_2 -# define DIR_SEPARATOR_2 '\\' -# endif -# ifndef PATH_SEPARATOR_2 -# define PATH_SEPARATOR_2 ';' -# endif -#endif - -#ifndef DIR_SEPARATOR_2 -# define IS_DIR_SEPARATOR(ch) ((ch) == DIR_SEPARATOR) -#else /* DIR_SEPARATOR_2 */ -# define IS_DIR_SEPARATOR(ch) \ - (((ch) == DIR_SEPARATOR) || ((ch) == DIR_SEPARATOR_2)) -#endif /* DIR_SEPARATOR_2 */ - -#ifndef PATH_SEPARATOR_2 -# define IS_PATH_SEPARATOR(ch) ((ch) == PATH_SEPARATOR) -#else /* PATH_SEPARATOR_2 */ -# define IS_PATH_SEPARATOR(ch) ((ch) == PATH_SEPARATOR_2) -#endif /* PATH_SEPARATOR_2 */ - -#ifdef __CYGWIN__ -# define FOPEN_WB "wb" -#endif - -#ifndef FOPEN_WB -# define FOPEN_WB "w" -#endif -#ifndef _O_BINARY -# define _O_BINARY 0 -#endif - -#define XMALLOC(type, num) ((type *) xmalloc ((num) * sizeof(type))) -#define XFREE(stale) do { \ - if (stale) { free ((void *) stale); stale = 0; } \ -} while (0) - -#undef LTWRAPPER_DEBUGPRINTF -#if defined DEBUGWRAPPER -# define LTWRAPPER_DEBUGPRINTF(args) ltwrapper_debugprintf args -static void -ltwrapper_debugprintf (const char *fmt, ...) -{ - va_list args; - va_start (args, fmt); - (void) vfprintf (stderr, fmt, args); - va_end (args); -} -#else -# define LTWRAPPER_DEBUGPRINTF(args) -#endif - -const char *program_name = NULL; - -void *xmalloc (size_t num); -char *xstrdup (const char *string); -const char *base_name (const char *name); -char *find_executable (const char *wrapper); -char *chase_symlinks (const char *pathspec); -int make_executable (const char *path); -int check_executable (const char *path); -char *strendzap (char *str, const char *pat); -void lt_fatal (const char *message, ...); -void lt_setenv (const char *name, const char *value); -char *lt_extend_str (const char *orig_value, const char *add, int to_end); -void lt_opt_process_env_set (const char *arg); -void lt_opt_process_env_prepend (const char *arg); -void lt_opt_process_env_append (const char *arg); -int lt_split_name_value (const char *arg, char** name, char** value); -void lt_update_exe_path (const char *name, const char *value); -void lt_update_lib_path (const char *name, const char *value); - -static const char *script_text_part1 = -EOF - - func_emit_wrapper_part1 yes | - $SED -e 's/\([\\"]\)/\\\1/g' \ - -e 's/^/ "/' -e 's/$/\\n"/' - echo ";" - cat <<EOF - -static const char *script_text_part2 = -EOF - func_emit_wrapper_part2 yes | - $SED -e 's/\([\\"]\)/\\\1/g' \ - -e 's/^/ "/' -e 's/$/\\n"/' - echo ";" - - cat <<EOF -const char * MAGIC_EXE = "$magic_exe"; -const char * LIB_PATH_VARNAME = "$shlibpath_var"; -EOF - - if test "$shlibpath_overrides_runpath" = yes && test -n "$shlibpath_var" && test -n "$temp_rpath"; then - func_to_host_pathlist "$temp_rpath" - cat <<EOF -const char * LIB_PATH_VALUE = "$func_to_host_pathlist_result"; -EOF - else - cat <<"EOF" -const char * LIB_PATH_VALUE = ""; -EOF - fi - - if test -n "$dllsearchpath"; then - func_to_host_pathlist "$dllsearchpath:" - cat <<EOF -const char * EXE_PATH_VARNAME = "PATH"; -const char * EXE_PATH_VALUE = "$func_to_host_pathlist_result"; -EOF - else - cat <<"EOF" -const char * EXE_PATH_VARNAME = ""; -const char * EXE_PATH_VALUE = ""; -EOF - fi - - if test "$fast_install" = yes; then - cat <<EOF -const char * TARGET_PROGRAM_NAME = "lt-$outputname"; /* hopefully, no .exe */ -EOF - else - cat <<EOF -const char * TARGET_PROGRAM_NAME = "$outputname"; /* hopefully, no .exe */ -EOF - fi - - - cat <<"EOF" - -#define LTWRAPPER_OPTION_PREFIX "--lt-" -#define LTWRAPPER_OPTION_PREFIX_LENGTH 5 - -static const size_t opt_prefix_len = LTWRAPPER_OPTION_PREFIX_LENGTH; -static const char *ltwrapper_option_prefix = LTWRAPPER_OPTION_PREFIX; - -static const char *dumpscript_opt = LTWRAPPER_OPTION_PREFIX "dump-script"; - -static const size_t env_set_opt_len = LTWRAPPER_OPTION_PREFIX_LENGTH + 7; -static const char *env_set_opt = LTWRAPPER_OPTION_PREFIX "env-set"; - /* argument is putenv-style "foo=bar", value of foo is set to bar */ - -static const size_t env_prepend_opt_len = LTWRAPPER_OPTION_PREFIX_LENGTH + 11; -static const char *env_prepend_opt = LTWRAPPER_OPTION_PREFIX "env-prepend"; - /* argument is putenv-style "foo=bar", new value of foo is bar${foo} */ - -static const size_t env_append_opt_len = LTWRAPPER_OPTION_PREFIX_LENGTH + 10; -static const char *env_append_opt = LTWRAPPER_OPTION_PREFIX "env-append"; - /* argument is putenv-style "foo=bar", new value of foo is ${foo}bar */ - -int -main (int argc, char *argv[]) -{ - char **newargz; - int newargc; - char *tmp_pathspec; - char *actual_cwrapper_path; - char *actual_cwrapper_name; - char *target_name; - char *lt_argv_zero; - intptr_t rval = 127; - - int i; - - program_name = (char *) xstrdup (base_name (argv[0])); - LTWRAPPER_DEBUGPRINTF (("(main) argv[0] : %s\n", argv[0])); - LTWRAPPER_DEBUGPRINTF (("(main) program_name : %s\n", program_name)); - - /* very simple arg parsing; don't want to rely on getopt */ - for (i = 1; i < argc; i++) - { - if (strcmp (argv[i], dumpscript_opt) == 0) - { -EOF - case "$host" in - *mingw* | *cygwin* ) - # make stdout use "unix" line endings - echo " setmode(1,_O_BINARY);" - ;; - esac - - cat <<"EOF" - printf ("%s", script_text_part1); - printf ("%s", script_text_part2); - return 0; - } - } - - newargz = XMALLOC (char *, argc + 1); - tmp_pathspec = find_executable (argv[0]); - if (tmp_pathspec == NULL) - lt_fatal ("Couldn't find %s", argv[0]); - LTWRAPPER_DEBUGPRINTF (("(main) found exe (before symlink chase) at : %s\n", - tmp_pathspec)); - - actual_cwrapper_path = chase_symlinks (tmp_pathspec); - LTWRAPPER_DEBUGPRINTF (("(main) found exe (after symlink chase) at : %s\n", - actual_cwrapper_path)); - XFREE (tmp_pathspec); - - actual_cwrapper_name = xstrdup( base_name (actual_cwrapper_path)); - strendzap (actual_cwrapper_path, actual_cwrapper_name); - - /* wrapper name transforms */ - strendzap (actual_cwrapper_name, ".exe"); - tmp_pathspec = lt_extend_str (actual_cwrapper_name, ".exe", 1); - XFREE (actual_cwrapper_name); - actual_cwrapper_name = tmp_pathspec; - tmp_pathspec = 0; - - /* target_name transforms -- use actual target program name; might have lt- prefix */ - target_name = xstrdup (base_name (TARGET_PROGRAM_NAME)); - strendzap (target_name, ".exe"); - tmp_pathspec = lt_extend_str (target_name, ".exe", 1); - XFREE (target_name); - target_name = tmp_pathspec; - tmp_pathspec = 0; - - LTWRAPPER_DEBUGPRINTF (("(main) libtool target name: %s\n", - target_name)); -EOF - - cat <<EOF - newargz[0] = - XMALLOC (char, (strlen (actual_cwrapper_path) + - strlen ("$objdir") + 1 + strlen (actual_cwrapper_name) + 1)); - strcpy (newargz[0], actual_cwrapper_path); - strcat (newargz[0], "$objdir"); - strcat (newargz[0], "/"); -EOF - - cat <<"EOF" - /* stop here, and copy so we don't have to do this twice */ - tmp_pathspec = xstrdup (newargz[0]); - - /* do NOT want the lt- prefix here, so use actual_cwrapper_name */ - strcat (newargz[0], actual_cwrapper_name); - - /* DO want the lt- prefix here if it exists, so use target_name */ - lt_argv_zero = lt_extend_str (tmp_pathspec, target_name, 1); - XFREE (tmp_pathspec); - tmp_pathspec = NULL; -EOF - - case $host_os in - mingw*) - cat <<"EOF" - { - char* p; - while ((p = strchr (newargz[0], '\\')) != NULL) - { - *p = '/'; - } - while ((p = strchr (lt_argv_zero, '\\')) != NULL) - { - *p = '/'; - } - } -EOF - ;; - esac - - cat <<"EOF" - XFREE (target_name); - XFREE (actual_cwrapper_path); - XFREE (actual_cwrapper_name); - - lt_setenv ("BIN_SH", "xpg4"); /* for Tru64 */ - lt_setenv ("DUALCASE", "1"); /* for MSK sh */ - lt_update_lib_path (LIB_PATH_VARNAME, LIB_PATH_VALUE); - lt_update_exe_path (EXE_PATH_VARNAME, EXE_PATH_VALUE); - - newargc=0; - for (i = 1; i < argc; i++) - { - if (strncmp (argv[i], env_set_opt, env_set_opt_len) == 0) - { - if (argv[i][env_set_opt_len] == '=') - { - const char *p = argv[i] + env_set_opt_len + 1; - lt_opt_process_env_set (p); - } - else if (argv[i][env_set_opt_len] == '\0' && i + 1 < argc) - { - lt_opt_process_env_set (argv[++i]); /* don't copy */ - } - else - lt_fatal ("%s missing required argument", env_set_opt); - continue; - } - if (strncmp (argv[i], env_prepend_opt, env_prepend_opt_len) == 0) - { - if (argv[i][env_prepend_opt_len] == '=') - { - const char *p = argv[i] + env_prepend_opt_len + 1; - lt_opt_process_env_prepend (p); - } - else if (argv[i][env_prepend_opt_len] == '\0' && i + 1 < argc) - { - lt_opt_process_env_prepend (argv[++i]); /* don't copy */ - } - else - lt_fatal ("%s missing required argument", env_prepend_opt); - continue; - } - if (strncmp (argv[i], env_append_opt, env_append_opt_len) == 0) - { - if (argv[i][env_append_opt_len] == '=') - { - const char *p = argv[i] + env_append_opt_len + 1; - lt_opt_process_env_append (p); - } - else if (argv[i][env_append_opt_len] == '\0' && i + 1 < argc) - { - lt_opt_process_env_append (argv[++i]); /* don't copy */ - } - else - lt_fatal ("%s missing required argument", env_append_opt); - continue; - } - if (strncmp (argv[i], ltwrapper_option_prefix, opt_prefix_len) == 0) - { - /* however, if there is an option in the LTWRAPPER_OPTION_PREFIX - namespace, but it is not one of the ones we know about and - have already dealt with, above (inluding dump-script), then - report an error. Otherwise, targets might begin to believe - they are allowed to use options in the LTWRAPPER_OPTION_PREFIX - namespace. The first time any user complains about this, we'll - need to make LTWRAPPER_OPTION_PREFIX a configure-time option - or a configure.ac-settable value. - */ - lt_fatal ("Unrecognized option in %s namespace: '%s'", - ltwrapper_option_prefix, argv[i]); - } - /* otherwise ... */ - newargz[++newargc] = xstrdup (argv[i]); - } - newargz[++newargc] = NULL; - - LTWRAPPER_DEBUGPRINTF (("(main) lt_argv_zero : %s\n", (lt_argv_zero ? lt_argv_zero : "<NULL>"))); - for (i = 0; i < newargc; i++) - { - LTWRAPPER_DEBUGPRINTF (("(main) newargz[%d] : %s\n", i, (newargz[i] ? newargz[i] : "<NULL>"))); - } - -EOF - - case $host_os in - mingw*) - cat <<"EOF" - /* execv doesn't actually work on mingw as expected on unix */ - rval = _spawnv (_P_WAIT, lt_argv_zero, (const char * const *) newargz); - if (rval == -1) - { - /* failed to start process */ - LTWRAPPER_DEBUGPRINTF (("(main) failed to launch target \"%s\": errno = %d\n", lt_argv_zero, errno)); - return 127; - } - return rval; -EOF - ;; - *) - cat <<"EOF" - execv (lt_argv_zero, newargz); - return rval; /* =127, but avoids unused variable warning */ -EOF - ;; - esac - - cat <<"EOF" -} - -void * -xmalloc (size_t num) -{ - void *p = (void *) malloc (num); - if (!p) - lt_fatal ("Memory exhausted"); - - return p; -} - -char * -xstrdup (const char *string) -{ - return string ? strcpy ((char *) xmalloc (strlen (string) + 1), - string) : NULL; -} - -const char * -base_name (const char *name) -{ - const char *base; - -#if defined (HAVE_DOS_BASED_FILE_SYSTEM) - /* Skip over the disk name in MSDOS pathnames. */ - if (isalpha ((unsigned char) name[0]) && name[1] == ':') - name += 2; -#endif - - for (base = name; *name; name++) - if (IS_DIR_SEPARATOR (*name)) - base = name + 1; - return base; -} - -int -check_executable (const char *path) -{ - struct stat st; - - LTWRAPPER_DEBUGPRINTF (("(check_executable) : %s\n", - path ? (*path ? path : "EMPTY!") : "NULL!")); - if ((!path) || (!*path)) - return 0; - - if ((stat (path, &st) >= 0) - && (st.st_mode & (S_IXUSR | S_IXGRP | S_IXOTH))) - return 1; - else - return 0; -} - -int -make_executable (const char *path) -{ - int rval = 0; - struct stat st; - - LTWRAPPER_DEBUGPRINTF (("(make_executable) : %s\n", - path ? (*path ? path : "EMPTY!") : "NULL!")); - if ((!path) || (!*path)) - return 0; - - if (stat (path, &st) >= 0) - { - rval = chmod (path, st.st_mode | S_IXOTH | S_IXGRP | S_IXUSR); - } - return rval; -} - -/* Searches for the full path of the wrapper. Returns - newly allocated full path name if found, NULL otherwise - Does not chase symlinks, even on platforms that support them. -*/ -char * -find_executable (const char *wrapper) -{ - int has_slash = 0; - const char *p; - const char *p_next; - /* static buffer for getcwd */ - char tmp[LT_PATHMAX + 1]; - int tmp_len; - char *concat_name; - - LTWRAPPER_DEBUGPRINTF (("(find_executable) : %s\n", - wrapper ? (*wrapper ? wrapper : "EMPTY!") : "NULL!")); - - if ((wrapper == NULL) || (*wrapper == '\0')) - return NULL; - - /* Absolute path? */ -#if defined (HAVE_DOS_BASED_FILE_SYSTEM) - if (isalpha ((unsigned char) wrapper[0]) && wrapper[1] == ':') - { - concat_name = xstrdup (wrapper); - if (check_executable (concat_name)) - return concat_name; - XFREE (concat_name); - } - else - { -#endif - if (IS_DIR_SEPARATOR (wrapper[0])) - { - concat_name = xstrdup (wrapper); - if (check_executable (concat_name)) - return concat_name; - XFREE (concat_name); - } -#if defined (HAVE_DOS_BASED_FILE_SYSTEM) - } -#endif - - for (p = wrapper; *p; p++) - if (*p == '/') - { - has_slash = 1; - break; - } - if (!has_slash) - { - /* no slashes; search PATH */ - const char *path = getenv ("PATH"); - if (path != NULL) - { - for (p = path; *p; p = p_next) - { - const char *q; - size_t p_len; - for (q = p; *q; q++) - if (IS_PATH_SEPARATOR (*q)) - break; - p_len = q - p; - p_next = (*q == '\0' ? q : q + 1); - if (p_len == 0) - { - /* empty path: current directory */ - if (getcwd (tmp, LT_PATHMAX) == NULL) - lt_fatal ("getcwd failed"); - tmp_len = strlen (tmp); - concat_name = - XMALLOC (char, tmp_len + 1 + strlen (wrapper) + 1); - memcpy (concat_name, tmp, tmp_len); - concat_name[tmp_len] = '/'; - strcpy (concat_name + tmp_len + 1, wrapper); - } - else - { - concat_name = - XMALLOC (char, p_len + 1 + strlen (wrapper) + 1); - memcpy (concat_name, p, p_len); - concat_name[p_len] = '/'; - strcpy (concat_name + p_len + 1, wrapper); - } - if (check_executable (concat_name)) - return concat_name; - XFREE (concat_name); - } - } - /* not found in PATH; assume curdir */ - } - /* Relative path | not found in path: prepend cwd */ - if (getcwd (tmp, LT_PATHMAX) == NULL) - lt_fatal ("getcwd failed"); - tmp_len = strlen (tmp); - concat_name = XMALLOC (char, tmp_len + 1 + strlen (wrapper) + 1); - memcpy (concat_name, tmp, tmp_len); - concat_name[tmp_len] = '/'; - strcpy (concat_name + tmp_len + 1, wrapper); - - if (check_executable (concat_name)) - return concat_name; - XFREE (concat_name); - return NULL; -} - -char * -chase_symlinks (const char *pathspec) -{ -#ifndef S_ISLNK - return xstrdup (pathspec); -#else - char buf[LT_PATHMAX]; - struct stat s; - char *tmp_pathspec = xstrdup (pathspec); - char *p; - int has_symlinks = 0; - while (strlen (tmp_pathspec) && !has_symlinks) - { - LTWRAPPER_DEBUGPRINTF (("checking path component for symlinks: %s\n", - tmp_pathspec)); - if (lstat (tmp_pathspec, &s) == 0) - { - if (S_ISLNK (s.st_mode) != 0) - { - has_symlinks = 1; - break; - } - - /* search backwards for last DIR_SEPARATOR */ - p = tmp_pathspec + strlen (tmp_pathspec) - 1; - while ((p > tmp_pathspec) && (!IS_DIR_SEPARATOR (*p))) - p--; - if ((p == tmp_pathspec) && (!IS_DIR_SEPARATOR (*p))) - { - /* no more DIR_SEPARATORS left */ - break; - } - *p = '\0'; - } - else - { - char *errstr = strerror (errno); - lt_fatal ("Error accessing file %s (%s)", tmp_pathspec, errstr); - } - } - XFREE (tmp_pathspec); - - if (!has_symlinks) - { - return xstrdup (pathspec); - } - - tmp_pathspec = realpath (pathspec, buf); - if (tmp_pathspec == 0) - { - lt_fatal ("Could not follow symlinks for %s", pathspec); - } - return xstrdup (tmp_pathspec); -#endif -} - -char * -strendzap (char *str, const char *pat) -{ - size_t len, patlen; - - assert (str != NULL); - assert (pat != NULL); - - len = strlen (str); - patlen = strlen (pat); - - if (patlen <= len) - { - str += len - patlen; - if (strcmp (str, pat) == 0) - *str = '\0'; - } - return str; -} - -static void -lt_error_core (int exit_status, const char *mode, - const char *message, va_list ap) -{ - fprintf (stderr, "%s: %s: ", program_name, mode); - vfprintf (stderr, message, ap); - fprintf (stderr, ".\n"); - - if (exit_status >= 0) - exit (exit_status); -} - -void -lt_fatal (const char *message, ...) -{ - va_list ap; - va_start (ap, message); - lt_error_core (EXIT_FAILURE, "FATAL", message, ap); - va_end (ap); -} - -void -lt_setenv (const char *name, const char *value) -{ - LTWRAPPER_DEBUGPRINTF (("(lt_setenv) setting '%s' to '%s'\n", - (name ? name : "<NULL>"), - (value ? value : "<NULL>"))); - { -#ifdef HAVE_SETENV - /* always make a copy, for consistency with !HAVE_SETENV */ - char *str = xstrdup (value); - setenv (name, str, 1); -#else - int len = strlen (name) + 1 + strlen (value) + 1; - char *str = XMALLOC (char, len); - sprintf (str, "%s=%s", name, value); - if (putenv (str) != EXIT_SUCCESS) - { - XFREE (str); - } -#endif - } -} - -char * -lt_extend_str (const char *orig_value, const char *add, int to_end) -{ - char *new_value; - if (orig_value && *orig_value) - { - int orig_value_len = strlen (orig_value); - int add_len = strlen (add); - new_value = XMALLOC (char, add_len + orig_value_len + 1); - if (to_end) - { - strcpy (new_value, orig_value); - strcpy (new_value + orig_value_len, add); - } - else - { - strcpy (new_value, add); - strcpy (new_value + add_len, orig_value); - } - } - else - { - new_value = xstrdup (add); - } - return new_value; -} - -int -lt_split_name_value (const char *arg, char** name, char** value) -{ - const char *p; - int len; - if (!arg || !*arg) - return 1; - - p = strchr (arg, (int)'='); - - if (!p) - return 1; - - *value = xstrdup (++p); - - len = strlen (arg) - strlen (*value); - *name = XMALLOC (char, len); - strncpy (*name, arg, len-1); - (*name)[len - 1] = '\0'; - - return 0; -} - -void -lt_opt_process_env_set (const char *arg) -{ - char *name = NULL; - char *value = NULL; - - if (lt_split_name_value (arg, &name, &value) != 0) - { - XFREE (name); - XFREE (value); - lt_fatal ("bad argument for %s: '%s'", env_set_opt, arg); - } - - lt_setenv (name, value); - XFREE (name); - XFREE (value); -} - -void -lt_opt_process_env_prepend (const char *arg) -{ - char *name = NULL; - char *value = NULL; - char *new_value = NULL; - - if (lt_split_name_value (arg, &name, &value) != 0) - { - XFREE (name); - XFREE (value); - lt_fatal ("bad argument for %s: '%s'", env_prepend_opt, arg); - } - - new_value = lt_extend_str (getenv (name), value, 0); - lt_setenv (name, new_value); - XFREE (new_value); - XFREE (name); - XFREE (value); -} - -void -lt_opt_process_env_append (const char *arg) -{ - char *name = NULL; - char *value = NULL; - char *new_value = NULL; - - if (lt_split_name_value (arg, &name, &value) != 0) - { - XFREE (name); - XFREE (value); - lt_fatal ("bad argument for %s: '%s'", env_append_opt, arg); - } - - new_value = lt_extend_str (getenv (name), value, 1); - lt_setenv (name, new_value); - XFREE (new_value); - XFREE (name); - XFREE (value); -} - -void -lt_update_exe_path (const char *name, const char *value) -{ - LTWRAPPER_DEBUGPRINTF (("(lt_update_exe_path) modifying '%s' by prepending '%s'\n", - (name ? name : "<NULL>"), - (value ? value : "<NULL>"))); - - if (name && *name && value && *value) - { - char *new_value = lt_extend_str (getenv (name), value, 0); - /* some systems can't cope with a ':'-terminated path #' */ - int len = strlen (new_value); - while (((len = strlen (new_value)) > 0) && IS_PATH_SEPARATOR (new_value[len-1])) - { - new_value[len-1] = '\0'; - } - lt_setenv (name, new_value); - XFREE (new_value); - } -} - -void -lt_update_lib_path (const char *name, const char *value) -{ - LTWRAPPER_DEBUGPRINTF (("(lt_update_lib_path) modifying '%s' by prepending '%s'\n", - (name ? name : "<NULL>"), - (value ? value : "<NULL>"))); - - if (name && *name && value && *value) - { - char *new_value = lt_extend_str (getenv (name), value, 0); - lt_setenv (name, new_value); - XFREE (new_value); - } -} - - -EOF -} -# end: func_emit_cwrapperexe_src - -# func_mode_link arg... -func_mode_link () -{ - $opt_debug - case $host in - *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-cegcc*) - # It is impossible to link a dll without this setting, and - # we shouldn't force the makefile maintainer to figure out - # which system we are compiling for in order to pass an extra - # flag for every libtool invocation. - # allow_undefined=no - - # FIXME: Unfortunately, there are problems with the above when trying - # to make a dll which has undefined symbols, in which case not - # even a static library is built. For now, we need to specify - # -no-undefined on the libtool link line when we can be certain - # that all symbols are satisfied, otherwise we get a static library. - allow_undefined=yes - ;; - *) - allow_undefined=yes - ;; - esac - libtool_args=$nonopt - base_compile="$nonopt $@" - compile_command=$nonopt - finalize_command=$nonopt - - compile_rpath= - finalize_rpath= - compile_shlibpath= - finalize_shlibpath= - convenience= - old_convenience= - deplibs= - old_deplibs= - compiler_flags= - linker_flags= - dllsearchpath= - lib_search_path=`pwd` - inst_prefix_dir= - new_inherited_linker_flags= - - avoid_version=no - dlfiles= - dlprefiles= - dlself=no - export_dynamic=no - export_symbols= - export_symbols_regex= - generated= - libobjs= - ltlibs= - module=no - no_install=no - objs= - non_pic_objects= - precious_files_regex= - prefer_static_libs=no - preload=no - prev= - prevarg= - release= - rpath= - xrpath= - perm_rpath= - temp_rpath= - thread_safe=no - vinfo= - vinfo_number=no - weak_libs= - single_module="${wl}-single_module" - func_infer_tag $base_compile - - # We need to know -static, to get the right output filenames. - for arg - do - case $arg in - -shared) - test "$build_libtool_libs" != yes && \ - func_fatal_configuration "can not build a shared library" - build_old_libs=no - break - ;; - -all-static | -static | -static-libtool-libs) - case $arg in - -all-static) - if test "$build_libtool_libs" = yes && test -z "$link_static_flag"; then - func_warning "complete static linking is impossible in this configuration" - fi - if test -n "$link_static_flag"; then - dlopen_self=$dlopen_self_static - fi - prefer_static_libs=yes - ;; - -static) - if test -z "$pic_flag" && test -n "$link_static_flag"; then - dlopen_self=$dlopen_self_static - fi - prefer_static_libs=built - ;; - -static-libtool-libs) - if test -z "$pic_flag" && test -n "$link_static_flag"; then - dlopen_self=$dlopen_self_static - fi - prefer_static_libs=yes - ;; - esac - build_libtool_libs=no - build_old_libs=yes - break - ;; - esac - done - - # See if our shared archives depend on static archives. - test -n "$old_archive_from_new_cmds" && build_old_libs=yes - - # Go through the arguments, transforming them on the way. - while test "$#" -gt 0; do - arg="$1" - shift - func_quote_for_eval "$arg" - qarg=$func_quote_for_eval_unquoted_result - func_append libtool_args " $func_quote_for_eval_result" - - # If the previous option needs an argument, assign it. - if test -n "$prev"; then - case $prev in - output) - func_append compile_command " @OUTPUT@" - func_append finalize_command " @OUTPUT@" - ;; - esac - - case $prev in - dlfiles|dlprefiles) - if test "$preload" = no; then - # Add the symbol object into the linking commands. - func_append compile_command " @SYMFILE@" - func_append finalize_command " @SYMFILE@" - preload=yes - fi - case $arg in - *.la | *.lo) ;; # We handle these cases below. - force) - if test "$dlself" = no; then - dlself=needless - export_dynamic=yes - fi - prev= - continue - ;; - self) - if test "$prev" = dlprefiles; then - dlself=yes - elif test "$prev" = dlfiles && test "$dlopen_self" != yes; then - dlself=yes - else - dlself=needless - export_dynamic=yes - fi - prev= - continue - ;; - *) - if test "$prev" = dlfiles; then - dlfiles="$dlfiles $arg" - else - dlprefiles="$dlprefiles $arg" - fi - prev= - continue - ;; - esac - ;; - expsyms) - export_symbols="$arg" - test -f "$arg" \ - || func_fatal_error "symbol file \`$arg' does not exist" - prev= - continue - ;; - expsyms_regex) - export_symbols_regex="$arg" - prev= - continue - ;; - framework) - case $host in - *-*-darwin*) - case "$deplibs " in - *" $qarg.ltframework "*) ;; - *) deplibs="$deplibs $qarg.ltframework" # this is fixed later - ;; - esac - ;; - esac - prev= - continue - ;; - inst_prefix) - inst_prefix_dir="$arg" - prev= - continue - ;; - objectlist) - if test -f "$arg"; then - save_arg=$arg - moreargs= - for fil in `cat "$save_arg"` - do -# moreargs="$moreargs $fil" - arg=$fil - # A libtool-controlled object. - - # Check to see that this really is a libtool object. - if func_lalib_unsafe_p "$arg"; then - pic_object= - non_pic_object= - - # Read the .lo file - func_source "$arg" - - if test -z "$pic_object" || - test -z "$non_pic_object" || - test "$pic_object" = none && - test "$non_pic_object" = none; then - func_fatal_error "cannot find name of object for \`$arg'" - fi - - # Extract subdirectory from the argument. - func_dirname "$arg" "/" "" - xdir="$func_dirname_result" - - if test "$pic_object" != none; then - # Prepend the subdirectory the object is found in. - pic_object="$xdir$pic_object" - - if test "$prev" = dlfiles; then - if test "$build_libtool_libs" = yes && test "$dlopen_support" = yes; then - dlfiles="$dlfiles $pic_object" - prev= - continue - else - # If libtool objects are unsupported, then we need to preload. - prev=dlprefiles - fi - fi - - # CHECK ME: I think I busted this. -Ossama - if test "$prev" = dlprefiles; then - # Preload the old-style object. - dlprefiles="$dlprefiles $pic_object" - prev= - fi - - # A PIC object. - func_append libobjs " $pic_object" - arg="$pic_object" - fi - - # Non-PIC object. - if test "$non_pic_object" != none; then - # Prepend the subdirectory the object is found in. - non_pic_object="$xdir$non_pic_object" - - # A standard non-PIC object - func_append non_pic_objects " $non_pic_object" - if test -z "$pic_object" || test "$pic_object" = none ; then - arg="$non_pic_object" - fi - else - # If the PIC object exists, use it instead. - # $xdir was prepended to $pic_object above. - non_pic_object="$pic_object" - func_append non_pic_objects " $non_pic_object" - fi - else - # Only an error if not doing a dry-run. - if $opt_dry_run; then - # Extract subdirectory from the argument. - func_dirname "$arg" "/" "" - xdir="$func_dirname_result" - - func_lo2o "$arg" - pic_object=$xdir$objdir/$func_lo2o_result - non_pic_object=$xdir$func_lo2o_result - func_append libobjs " $pic_object" - func_append non_pic_objects " $non_pic_object" - else - func_fatal_error "\`$arg' is not a valid libtool object" - fi - fi - done - else - func_fatal_error "link input file \`$arg' does not exist" - fi - arg=$save_arg - prev= - continue - ;; - precious_regex) - precious_files_regex="$arg" - prev= - continue - ;; - release) - release="-$arg" - prev= - continue - ;; - rpath | xrpath) - # We need an absolute path. - case $arg in - [\\/]* | [A-Za-z]:[\\/]*) ;; - *) - func_fatal_error "only absolute run-paths are allowed" - ;; - esac - if test "$prev" = rpath; then - case "$rpath " in - *" $arg "*) ;; - *) rpath="$rpath $arg" ;; - esac - else - case "$xrpath " in - *" $arg "*) ;; - *) xrpath="$xrpath $arg" ;; - esac - fi - prev= - continue - ;; - shrext) - shrext_cmds="$arg" - prev= - continue - ;; - weak) - weak_libs="$weak_libs $arg" - prev= - continue - ;; - xcclinker) - linker_flags="$linker_flags $qarg" - compiler_flags="$compiler_flags $qarg" - prev= - func_append compile_command " $qarg" - func_append finalize_command " $qarg" - continue - ;; - xcompiler) - compiler_flags="$compiler_flags $qarg" - prev= - func_append compile_command " $qarg" - func_append finalize_command " $qarg" - continue - ;; - xlinker) - linker_flags="$linker_flags $qarg" - compiler_flags="$compiler_flags $wl$qarg" - prev= - func_append compile_command " $wl$qarg" - func_append finalize_command " $wl$qarg" - continue - ;; - *) - eval "$prev=\"\$arg\"" - prev= - continue - ;; - esac - fi # test -n "$prev" - - prevarg="$arg" - - case $arg in - -all-static) - if test -n "$link_static_flag"; then - # See comment for -static flag below, for more details. - func_append compile_command " $link_static_flag" - func_append finalize_command " $link_static_flag" - fi - continue - ;; - - -allow-undefined) - # FIXME: remove this flag sometime in the future. - func_fatal_error "\`-allow-undefined' must not be used because it is the default" - ;; - - -avoid-version) - avoid_version=yes - continue - ;; - - -dlopen) - prev=dlfiles - continue - ;; - - -dlpreopen) - prev=dlprefiles - continue - ;; - - -export-dynamic) - export_dynamic=yes - continue - ;; - - -export-symbols | -export-symbols-regex) - if test -n "$export_symbols" || test -n "$export_symbols_regex"; then - func_fatal_error "more than one -exported-symbols argument is not allowed" - fi - if test "X$arg" = "X-export-symbols"; then - prev=expsyms - else - prev=expsyms_regex - fi - continue - ;; - - -framework) - prev=framework - continue - ;; - - -inst-prefix-dir) - prev=inst_prefix - continue - ;; - - # The native IRIX linker understands -LANG:*, -LIST:* and -LNO:* - # so, if we see these flags be careful not to treat them like -L - -L[A-Z][A-Z]*:*) - case $with_gcc/$host in - no/*-*-irix* | /*-*-irix*) - func_append compile_command " $arg" - func_append finalize_command " $arg" - ;; - esac - continue - ;; - - -L*) - func_stripname '-L' '' "$arg" - dir=$func_stripname_result - if test -z "$dir"; then - if test "$#" -gt 0; then - func_fatal_error "require no space between \`-L' and \`$1'" - else - func_fatal_error "need path for \`-L' option" - fi - fi - # We need an absolute path. - case $dir in - [\\/]* | [A-Za-z]:[\\/]*) ;; - *) - absdir=`cd "$dir" && pwd` - test -z "$absdir" && \ - func_fatal_error "cannot determine absolute directory name of \`$dir'" - dir="$absdir" - ;; - esac - case "$deplibs " in - *" -L$dir "*) ;; - *) - deplibs="$deplibs -L$dir" - lib_search_path="$lib_search_path $dir" - ;; - esac - case $host in - *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-cegcc*) - testbindir=`$ECHO "X$dir" | $Xsed -e 's*/lib$*/bin*'` - case :$dllsearchpath: in - *":$dir:"*) ;; - ::) dllsearchpath=$dir;; - *) dllsearchpath="$dllsearchpath:$dir";; - esac - case :$dllsearchpath: in - *":$testbindir:"*) ;; - ::) dllsearchpath=$testbindir;; - *) dllsearchpath="$dllsearchpath:$testbindir";; - esac - ;; - esac - continue - ;; - - -l*) - if test "X$arg" = "X-lc" || test "X$arg" = "X-lm"; then - case $host in - *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-beos* | *-cegcc*) - # These systems don't actually have a C or math library (as such) - continue - ;; - *-*-os2*) - # These systems don't actually have a C library (as such) - test "X$arg" = "X-lc" && continue - ;; - *-*-openbsd* | *-*-freebsd* | *-*-dragonfly*) - # Do not include libc due to us having libc/libc_r. - test "X$arg" = "X-lc" && continue - ;; - *-*-rhapsody* | *-*-darwin1.[012]) - # Rhapsody C and math libraries are in the System framework - deplibs="$deplibs System.ltframework" - continue - ;; - *-*-sco3.2v5* | *-*-sco5v6*) - # Causes problems with __ctype - test "X$arg" = "X-lc" && continue - ;; - *-*-sysv4.2uw2* | *-*-sysv5* | *-*-unixware* | *-*-OpenUNIX*) - # Compiler inserts libc in the correct place for threads to work - test "X$arg" = "X-lc" && continue - ;; - esac - elif test "X$arg" = "X-lc_r"; then - case $host in - *-*-openbsd* | *-*-freebsd* | *-*-dragonfly*) - # Do not include libc_r directly, use -pthread flag. - continue - ;; - esac - fi - deplibs="$deplibs $arg" - continue - ;; - - -module) - module=yes - continue - ;; - - # Tru64 UNIX uses -model [arg] to determine the layout of C++ - # classes, name mangling, and exception handling. - # Darwin uses the -arch flag to determine output architecture. - -model|-arch|-isysroot) - compiler_flags="$compiler_flags $arg" - func_append compile_command " $arg" - func_append finalize_command " $arg" - prev=xcompiler - continue - ;; - - -mt|-mthreads|-kthread|-Kthread|-pthread|-pthreads|--thread-safe|-threads) - compiler_flags="$compiler_flags $arg" - func_append compile_command " $arg" - func_append finalize_command " $arg" - case "$new_inherited_linker_flags " in - *" $arg "*) ;; - * ) new_inherited_linker_flags="$new_inherited_linker_flags $arg" ;; - esac - continue - ;; - - -multi_module) - single_module="${wl}-multi_module" - continue - ;; - - -no-fast-install) - fast_install=no - continue - ;; - - -no-install) - case $host in - *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-*-darwin* | *-cegcc*) - # The PATH hackery in wrapper scripts is required on Windows - # and Darwin in order for the loader to find any dlls it needs. - func_warning "\`-no-install' is ignored for $host" - func_warning "assuming \`-no-fast-install' instead" - fast_install=no - ;; - *) no_install=yes ;; - esac - continue - ;; - - -no-undefined) - allow_undefined=no - continue - ;; - - -objectlist) - prev=objectlist - continue - ;; - - -o) prev=output ;; - - -precious-files-regex) - prev=precious_regex - continue - ;; - - -release) - prev=release - continue - ;; - - -rpath) - prev=rpath - continue - ;; - - -R) - prev=xrpath - continue - ;; - - -R*) - func_stripname '-R' '' "$arg" - dir=$func_stripname_result - # We need an absolute path. - case $dir in - [\\/]* | [A-Za-z]:[\\/]*) ;; - *) - func_fatal_error "only absolute run-paths are allowed" - ;; - esac - case "$xrpath " in - *" $dir "*) ;; - *) xrpath="$xrpath $dir" ;; - esac - continue - ;; - - -shared) - # The effects of -shared are defined in a previous loop. - continue - ;; - - -shrext) - prev=shrext - continue - ;; - - -static | -static-libtool-libs) - # The effects of -static are defined in a previous loop. - # We used to do the same as -all-static on platforms that - # didn't have a PIC flag, but the assumption that the effects - # would be equivalent was wrong. It would break on at least - # Digital Unix and AIX. - continue - ;; - - -thread-safe) - thread_safe=yes - continue - ;; - - -version-info) - prev=vinfo - continue - ;; - - -version-number) - prev=vinfo - vinfo_number=yes - continue - ;; - - -weak) - prev=weak - continue - ;; - - -Wc,*) - func_stripname '-Wc,' '' "$arg" - args=$func_stripname_result - arg= - save_ifs="$IFS"; IFS=',' - for flag in $args; do - IFS="$save_ifs" - func_quote_for_eval "$flag" - arg="$arg $wl$func_quote_for_eval_result" - compiler_flags="$compiler_flags $func_quote_for_eval_result" - done - IFS="$save_ifs" - func_stripname ' ' '' "$arg" - arg=$func_stripname_result - ;; - - -Wl,*) - func_stripname '-Wl,' '' "$arg" - args=$func_stripname_result - arg= - save_ifs="$IFS"; IFS=',' - for flag in $args; do - IFS="$save_ifs" - func_quote_for_eval "$flag" - arg="$arg $wl$func_quote_for_eval_result" - compiler_flags="$compiler_flags $wl$func_quote_for_eval_result" - linker_flags="$linker_flags $func_quote_for_eval_result" - done - IFS="$save_ifs" - func_stripname ' ' '' "$arg" - arg=$func_stripname_result - ;; - - -Xcompiler) - prev=xcompiler - continue - ;; - - -Xlinker) - prev=xlinker - continue - ;; - - -XCClinker) - prev=xcclinker - continue - ;; - - # -msg_* for osf cc - -msg_*) - func_quote_for_eval "$arg" - arg="$func_quote_for_eval_result" - ;; - - # -64, -mips[0-9] enable 64-bit mode on the SGI compiler - # -r[0-9][0-9]* specifies the processor on the SGI compiler - # -xarch=*, -xtarget=* enable 64-bit mode on the Sun compiler - # +DA*, +DD* enable 64-bit mode on the HP compiler - # -q* pass through compiler args for the IBM compiler - # -m*, -t[45]*, -txscale* pass through architecture-specific - # compiler args for GCC - # -F/path gives path to uninstalled frameworks, gcc on darwin - # -p, -pg, --coverage, -fprofile-* pass through profiling flag for GCC - # @file GCC response files - -64|-mips[0-9]|-r[0-9][0-9]*|-xarch=*|-xtarget=*|+DA*|+DD*|-q*|-m*| \ - -t[45]*|-txscale*|-p|-pg|--coverage|-fprofile-*|-F*|@*) - func_quote_for_eval "$arg" - arg="$func_quote_for_eval_result" - func_append compile_command " $arg" - func_append finalize_command " $arg" - compiler_flags="$compiler_flags $arg" - continue - ;; - - # Some other compiler flag. - -* | +*) - func_quote_for_eval "$arg" - arg="$func_quote_for_eval_result" - ;; - - *.$objext) - # A standard object. - objs="$objs $arg" - ;; - - *.lo) - # A libtool-controlled object. - - # Check to see that this really is a libtool object. - if func_lalib_unsafe_p "$arg"; then - pic_object= - non_pic_object= - - # Read the .lo file - func_source "$arg" - - if test -z "$pic_object" || - test -z "$non_pic_object" || - test "$pic_object" = none && - test "$non_pic_object" = none; then - func_fatal_error "cannot find name of object for \`$arg'" - fi - - # Extract subdirectory from the argument. - func_dirname "$arg" "/" "" - xdir="$func_dirname_result" - - if test "$pic_object" != none; then - # Prepend the subdirectory the object is found in. - pic_object="$xdir$pic_object" - - if test "$prev" = dlfiles; then - if test "$build_libtool_libs" = yes && test "$dlopen_support" = yes; then - dlfiles="$dlfiles $pic_object" - prev= - continue - else - # If libtool objects are unsupported, then we need to preload. - prev=dlprefiles - fi - fi - - # CHECK ME: I think I busted this. -Ossama - if test "$prev" = dlprefiles; then - # Preload the old-style object. - dlprefiles="$dlprefiles $pic_object" - prev= - fi - - # A PIC object. - func_append libobjs " $pic_object" - arg="$pic_object" - fi - - # Non-PIC object. - if test "$non_pic_object" != none; then - # Prepend the subdirectory the object is found in. - non_pic_object="$xdir$non_pic_object" - - # A standard non-PIC object - func_append non_pic_objects " $non_pic_object" - if test -z "$pic_object" || test "$pic_object" = none ; then - arg="$non_pic_object" - fi - else - # If the PIC object exists, use it instead. - # $xdir was prepended to $pic_object above. - non_pic_object="$pic_object" - func_append non_pic_objects " $non_pic_object" - fi - else - # Only an error if not doing a dry-run. - if $opt_dry_run; then - # Extract subdirectory from the argument. - func_dirname "$arg" "/" "" - xdir="$func_dirname_result" - - func_lo2o "$arg" - pic_object=$xdir$objdir/$func_lo2o_result - non_pic_object=$xdir$func_lo2o_result - func_append libobjs " $pic_object" - func_append non_pic_objects " $non_pic_object" - else - func_fatal_error "\`$arg' is not a valid libtool object" - fi - fi - ;; - - *.$libext) - # An archive. - deplibs="$deplibs $arg" - old_deplibs="$old_deplibs $arg" - continue - ;; - - *.la) - # A libtool-controlled library. - - if test "$prev" = dlfiles; then - # This library was specified with -dlopen. - dlfiles="$dlfiles $arg" - prev= - elif test "$prev" = dlprefiles; then - # The library was specified with -dlpreopen. - dlprefiles="$dlprefiles $arg" - prev= - else - deplibs="$deplibs $arg" - fi - continue - ;; - - # Some other compiler argument. - *) - # Unknown arguments in both finalize_command and compile_command need - # to be aesthetically quoted because they are evaled later. - func_quote_for_eval "$arg" - arg="$func_quote_for_eval_result" - ;; - esac # arg - - # Now actually substitute the argument into the commands. - if test -n "$arg"; then - func_append compile_command " $arg" - func_append finalize_command " $arg" - fi - done # argument parsing loop - - test -n "$prev" && \ - func_fatal_help "the \`$prevarg' option requires an argument" - - if test "$export_dynamic" = yes && test -n "$export_dynamic_flag_spec"; then - eval arg=\"$export_dynamic_flag_spec\" - func_append compile_command " $arg" - func_append finalize_command " $arg" - fi - - oldlibs= - # calculate the name of the file, without its directory - func_basename "$output" - outputname="$func_basename_result" - libobjs_save="$libobjs" - - if test -n "$shlibpath_var"; then - # get the directories listed in $shlibpath_var - eval shlib_search_path=\`\$ECHO \"X\${$shlibpath_var}\" \| \$Xsed -e \'s/:/ /g\'\` - else - shlib_search_path= - fi - eval sys_lib_search_path=\"$sys_lib_search_path_spec\" - eval sys_lib_dlsearch_path=\"$sys_lib_dlsearch_path_spec\" - - func_dirname "$output" "/" "" - output_objdir="$func_dirname_result$objdir" - # Create the object directory. - func_mkdir_p "$output_objdir" - - # Determine the type of output - case $output in - "") - func_fatal_help "you must specify an output file" - ;; - *.$libext) linkmode=oldlib ;; - *.lo | *.$objext) linkmode=obj ;; - *.la) linkmode=lib ;; - *) linkmode=prog ;; # Anything else should be a program. - esac - - specialdeplibs= - - libs= - # Find all interdependent deplibs by searching for libraries - # that are linked more than once (e.g. -la -lb -la) - for deplib in $deplibs; do - if $opt_duplicate_deps ; then - case "$libs " in - *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;; - esac - fi - libs="$libs $deplib" - done - - if test "$linkmode" = lib; then - libs="$predeps $libs $compiler_lib_search_path $postdeps" - - # Compute libraries that are listed more than once in $predeps - # $postdeps and mark them as special (i.e., whose duplicates are - # not to be eliminated). - pre_post_deps= - if $opt_duplicate_compiler_generated_deps; then - for pre_post_dep in $predeps $postdeps; do - case "$pre_post_deps " in - *" $pre_post_dep "*) specialdeplibs="$specialdeplibs $pre_post_deps" ;; - esac - pre_post_deps="$pre_post_deps $pre_post_dep" - done - fi - pre_post_deps= - fi - - deplibs= - newdependency_libs= - newlib_search_path= - need_relink=no # whether we're linking any uninstalled libtool libraries - notinst_deplibs= # not-installed libtool libraries - notinst_path= # paths that contain not-installed libtool libraries - - case $linkmode in - lib) - passes="conv dlpreopen link" - for file in $dlfiles $dlprefiles; do - case $file in - *.la) ;; - *) - func_fatal_help "libraries can \`-dlopen' only libtool libraries: $file" - ;; - esac - done - ;; - prog) - compile_deplibs= - finalize_deplibs= - alldeplibs=no - newdlfiles= - newdlprefiles= - passes="conv scan dlopen dlpreopen link" - ;; - *) passes="conv" - ;; - esac - - for pass in $passes; do - # The preopen pass in lib mode reverses $deplibs; put it back here - # so that -L comes before libs that need it for instance... - if test "$linkmode,$pass" = "lib,link"; then - ## FIXME: Find the place where the list is rebuilt in the wrong - ## order, and fix it there properly - tmp_deplibs= - for deplib in $deplibs; do - tmp_deplibs="$deplib $tmp_deplibs" - done - deplibs="$tmp_deplibs" - fi - - if test "$linkmode,$pass" = "lib,link" || - test "$linkmode,$pass" = "prog,scan"; then - libs="$deplibs" - deplibs= - fi - if test "$linkmode" = prog; then - case $pass in - dlopen) libs="$dlfiles" ;; - dlpreopen) libs="$dlprefiles" ;; - link) libs="$deplibs %DEPLIBS% $dependency_libs" ;; - esac - fi - if test "$linkmode,$pass" = "lib,dlpreopen"; then - # Collect and forward deplibs of preopened libtool libs - for lib in $dlprefiles; do - # Ignore non-libtool-libs - dependency_libs= - case $lib in - *.la) func_source "$lib" ;; - esac - - # Collect preopened libtool deplibs, except any this library - # has declared as weak libs - for deplib in $dependency_libs; do - deplib_base=`$ECHO "X$deplib" | $Xsed -e "$basename"` - case " $weak_libs " in - *" $deplib_base "*) ;; - *) deplibs="$deplibs $deplib" ;; - esac - done - done - libs="$dlprefiles" - fi - if test "$pass" = dlopen; then - # Collect dlpreopened libraries - save_deplibs="$deplibs" - deplibs= - fi - - for deplib in $libs; do - lib= - found=no - case $deplib in - -mt|-mthreads|-kthread|-Kthread|-pthread|-pthreads|--thread-safe|-threads) - if test "$linkmode,$pass" = "prog,link"; then - compile_deplibs="$deplib $compile_deplibs" - finalize_deplibs="$deplib $finalize_deplibs" - else - compiler_flags="$compiler_flags $deplib" - if test "$linkmode" = lib ; then - case "$new_inherited_linker_flags " in - *" $deplib "*) ;; - * ) new_inherited_linker_flags="$new_inherited_linker_flags $deplib" ;; - esac - fi - fi - continue - ;; - -l*) - if test "$linkmode" != lib && test "$linkmode" != prog; then - func_warning "\`-l' is ignored for archives/objects" - continue - fi - func_stripname '-l' '' "$deplib" - name=$func_stripname_result - if test "$linkmode" = lib; then - searchdirs="$newlib_search_path $lib_search_path $compiler_lib_search_dirs $sys_lib_search_path $shlib_search_path" - else - searchdirs="$newlib_search_path $lib_search_path $sys_lib_search_path $shlib_search_path" - fi - for searchdir in $searchdirs; do - for search_ext in .la $std_shrext .so .a; do - # Search the libtool library - lib="$searchdir/lib${name}${search_ext}" - if test -f "$lib"; then - if test "$search_ext" = ".la"; then - found=yes - else - found=no - fi - break 2 - fi - done - done - if test "$found" != yes; then - # deplib doesn't seem to be a libtool library - if test "$linkmode,$pass" = "prog,link"; then - compile_deplibs="$deplib $compile_deplibs" - finalize_deplibs="$deplib $finalize_deplibs" - else - deplibs="$deplib $deplibs" - test "$linkmode" = lib && newdependency_libs="$deplib $newdependency_libs" - fi - continue - else # deplib is a libtool library - # If $allow_libtool_libs_with_static_runtimes && $deplib is a stdlib, - # We need to do some special things here, and not later. - if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then - case " $predeps $postdeps " in - *" $deplib "*) - if func_lalib_p "$lib"; then - library_names= - old_library= - func_source "$lib" - for l in $old_library $library_names; do - ll="$l" - done - if test "X$ll" = "X$old_library" ; then # only static version available - found=no - func_dirname "$lib" "" "." - ladir="$func_dirname_result" - lib=$ladir/$old_library - if test "$linkmode,$pass" = "prog,link"; then - compile_deplibs="$deplib $compile_deplibs" - finalize_deplibs="$deplib $finalize_deplibs" - else - deplibs="$deplib $deplibs" - test "$linkmode" = lib && newdependency_libs="$deplib $newdependency_libs" - fi - continue - fi - fi - ;; - *) ;; - esac - fi - fi - ;; # -l - *.ltframework) - if test "$linkmode,$pass" = "prog,link"; then - compile_deplibs="$deplib $compile_deplibs" - finalize_deplibs="$deplib $finalize_deplibs" - else - deplibs="$deplib $deplibs" - if test "$linkmode" = lib ; then - case "$new_inherited_linker_flags " in - *" $deplib "*) ;; - * ) new_inherited_linker_flags="$new_inherited_linker_flags $deplib" ;; - esac - fi - fi - continue - ;; - -L*) - case $linkmode in - lib) - deplibs="$deplib $deplibs" - test "$pass" = conv && continue - newdependency_libs="$deplib $newdependency_libs" - func_stripname '-L' '' "$deplib" - newlib_search_path="$newlib_search_path $func_stripname_result" - ;; - prog) - if test "$pass" = conv; then - deplibs="$deplib $deplibs" - continue - fi - if test "$pass" = scan; then - deplibs="$deplib $deplibs" - else - compile_deplibs="$deplib $compile_deplibs" - finalize_deplibs="$deplib $finalize_deplibs" - fi - func_stripname '-L' '' "$deplib" - newlib_search_path="$newlib_search_path $func_stripname_result" - ;; - *) - func_warning "\`-L' is ignored for archives/objects" - ;; - esac # linkmode - continue - ;; # -L - -R*) - if test "$pass" = link; then - func_stripname '-R' '' "$deplib" - dir=$func_stripname_result - # Make sure the xrpath contains only unique directories. - case "$xrpath " in - *" $dir "*) ;; - *) xrpath="$xrpath $dir" ;; - esac - fi - deplibs="$deplib $deplibs" - continue - ;; - *.la) lib="$deplib" ;; - *.$libext) - if test "$pass" = conv; then - deplibs="$deplib $deplibs" - continue - fi - case $linkmode in - lib) - # Linking convenience modules into shared libraries is allowed, - # but linking other static libraries is non-portable. - case " $dlpreconveniencelibs " in - *" $deplib "*) ;; - *) - valid_a_lib=no - case $deplibs_check_method in - match_pattern*) - set dummy $deplibs_check_method; shift - match_pattern_regex=`expr "$deplibs_check_method" : "$1 \(.*\)"` - if eval "\$ECHO \"X$deplib\"" 2>/dev/null | $Xsed -e 10q \ - | $EGREP "$match_pattern_regex" > /dev/null; then - valid_a_lib=yes - fi - ;; - pass_all) - valid_a_lib=yes - ;; - esac - if test "$valid_a_lib" != yes; then - $ECHO - $ECHO "*** Warning: Trying to link with static lib archive $deplib." - $ECHO "*** I have the capability to make that library automatically link in when" - $ECHO "*** you link to this library. But I can only do this if you have a" - $ECHO "*** shared version of the library, which you do not appear to have" - $ECHO "*** because the file extensions .$libext of this argument makes me believe" - $ECHO "*** that it is just a static archive that I should not use here." - else - $ECHO - $ECHO "*** Warning: Linking the shared library $output against the" - $ECHO "*** static library $deplib is not portable!" - deplibs="$deplib $deplibs" - fi - ;; - esac - continue - ;; - prog) - if test "$pass" != link; then - deplibs="$deplib $deplibs" - else - compile_deplibs="$deplib $compile_deplibs" - finalize_deplibs="$deplib $finalize_deplibs" - fi - continue - ;; - esac # linkmode - ;; # *.$libext - *.lo | *.$objext) - if test "$pass" = conv; then - deplibs="$deplib $deplibs" - elif test "$linkmode" = prog; then - if test "$pass" = dlpreopen || test "$dlopen_support" != yes || test "$build_libtool_libs" = no; then - # If there is no dlopen support or we're linking statically, - # we need to preload. - newdlprefiles="$newdlprefiles $deplib" - compile_deplibs="$deplib $compile_deplibs" - finalize_deplibs="$deplib $finalize_deplibs" - else - newdlfiles="$newdlfiles $deplib" - fi - fi - continue - ;; - %DEPLIBS%) - alldeplibs=yes - continue - ;; - esac # case $deplib - - if test "$found" = yes || test -f "$lib"; then : - else - func_fatal_error "cannot find the library \`$lib' or unhandled argument \`$deplib'" - fi - - # Check to see that this really is a libtool archive. - func_lalib_unsafe_p "$lib" \ - || func_fatal_error "\`$lib' is not a valid libtool archive" - - func_dirname "$lib" "" "." - ladir="$func_dirname_result" - - dlname= - dlopen= - dlpreopen= - libdir= - library_names= - old_library= - inherited_linker_flags= - # If the library was installed with an old release of libtool, - # it will not redefine variables installed, or shouldnotlink - installed=yes - shouldnotlink=no - avoidtemprpath= - - - # Read the .la file - func_source "$lib" - - # Convert "-framework foo" to "foo.ltframework" - if test -n "$inherited_linker_flags"; then - tmp_inherited_linker_flags=`$ECHO "X$inherited_linker_flags" | $Xsed -e 's/-framework \([^ $]*\)/\1.ltframework/g'` - for tmp_inherited_linker_flag in $tmp_inherited_linker_flags; do - case " $new_inherited_linker_flags " in - *" $tmp_inherited_linker_flag "*) ;; - *) new_inherited_linker_flags="$new_inherited_linker_flags $tmp_inherited_linker_flag";; - esac - done - fi - dependency_libs=`$ECHO "X $dependency_libs" | $Xsed -e 's% \([^ $]*\).ltframework% -framework \1%g'` - if test "$linkmode,$pass" = "lib,link" || - test "$linkmode,$pass" = "prog,scan" || - { test "$linkmode" != prog && test "$linkmode" != lib; }; then - test -n "$dlopen" && dlfiles="$dlfiles $dlopen" - test -n "$dlpreopen" && dlprefiles="$dlprefiles $dlpreopen" - fi - - if test "$pass" = conv; then - # Only check for convenience libraries - deplibs="$lib $deplibs" - if test -z "$libdir"; then - if test -z "$old_library"; then - func_fatal_error "cannot find name of link library for \`$lib'" - fi - # It is a libtool convenience library, so add in its objects. - convenience="$convenience $ladir/$objdir/$old_library" - old_convenience="$old_convenience $ladir/$objdir/$old_library" - elif test "$linkmode" != prog && test "$linkmode" != lib; then - func_fatal_error "\`$lib' is not a convenience library" - fi - tmp_libs= - for deplib in $dependency_libs; do - deplibs="$deplib $deplibs" - if $opt_duplicate_deps ; then - case "$tmp_libs " in - *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;; - esac - fi - tmp_libs="$tmp_libs $deplib" - done - continue - fi # $pass = conv - - - # Get the name of the library we link against. - linklib= - for l in $old_library $library_names; do - linklib="$l" - done - if test -z "$linklib"; then - func_fatal_error "cannot find name of link library for \`$lib'" - fi - - # This library was specified with -dlopen. - if test "$pass" = dlopen; then - if test -z "$libdir"; then - func_fatal_error "cannot -dlopen a convenience library: \`$lib'" - fi - if test -z "$dlname" || - test "$dlopen_support" != yes || - test "$build_libtool_libs" = no; then - # If there is no dlname, no dlopen support or we're linking - # statically, we need to preload. We also need to preload any - # dependent libraries so libltdl's deplib preloader doesn't - # bomb out in the load deplibs phase. - dlprefiles="$dlprefiles $lib $dependency_libs" - else - newdlfiles="$newdlfiles $lib" - fi - continue - fi # $pass = dlopen - - # We need an absolute path. - case $ladir in - [\\/]* | [A-Za-z]:[\\/]*) abs_ladir="$ladir" ;; - *) - abs_ladir=`cd "$ladir" && pwd` - if test -z "$abs_ladir"; then - func_warning "cannot determine absolute directory name of \`$ladir'" - func_warning "passing it literally to the linker, although it might fail" - abs_ladir="$ladir" - fi - ;; - esac - func_basename "$lib" - laname="$func_basename_result" - - # Find the relevant object directory and library name. - if test "X$installed" = Xyes; then - if test ! -f "$libdir/$linklib" && test -f "$abs_ladir/$linklib"; then - func_warning "library \`$lib' was moved." - dir="$ladir" - absdir="$abs_ladir" - libdir="$abs_ladir" - else - dir="$libdir" - absdir="$libdir" - fi - test "X$hardcode_automatic" = Xyes && avoidtemprpath=yes - else - if test ! -f "$ladir/$objdir/$linklib" && test -f "$abs_ladir/$linklib"; then - dir="$ladir" - absdir="$abs_ladir" - # Remove this search path later - notinst_path="$notinst_path $abs_ladir" - else - dir="$ladir/$objdir" - absdir="$abs_ladir/$objdir" - # Remove this search path later - notinst_path="$notinst_path $abs_ladir" - fi - fi # $installed = yes - func_stripname 'lib' '.la' "$laname" - name=$func_stripname_result - - # This library was specified with -dlpreopen. - if test "$pass" = dlpreopen; then - if test -z "$libdir" && test "$linkmode" = prog; then - func_fatal_error "only libraries may -dlpreopen a convenience library: \`$lib'" - fi - # Prefer using a static library (so that no silly _DYNAMIC symbols - # are required to link). - if test -n "$old_library"; then - newdlprefiles="$newdlprefiles $dir/$old_library" - # Keep a list of preopened convenience libraries to check - # that they are being used correctly in the link pass. - test -z "$libdir" && \ - dlpreconveniencelibs="$dlpreconveniencelibs $dir/$old_library" - # Otherwise, use the dlname, so that lt_dlopen finds it. - elif test -n "$dlname"; then - newdlprefiles="$newdlprefiles $dir/$dlname" - else - newdlprefiles="$newdlprefiles $dir/$linklib" - fi - fi # $pass = dlpreopen - - if test -z "$libdir"; then - # Link the convenience library - if test "$linkmode" = lib; then - deplibs="$dir/$old_library $deplibs" - elif test "$linkmode,$pass" = "prog,link"; then - compile_deplibs="$dir/$old_library $compile_deplibs" - finalize_deplibs="$dir/$old_library $finalize_deplibs" - else - deplibs="$lib $deplibs" # used for prog,scan pass - fi - continue - fi - - - if test "$linkmode" = prog && test "$pass" != link; then - newlib_search_path="$newlib_search_path $ladir" - deplibs="$lib $deplibs" - - linkalldeplibs=no - if test "$link_all_deplibs" != no || test -z "$library_names" || - test "$build_libtool_libs" = no; then - linkalldeplibs=yes - fi - - tmp_libs= - for deplib in $dependency_libs; do - case $deplib in - -L*) func_stripname '-L' '' "$deplib" - newlib_search_path="$newlib_search_path $func_stripname_result" - ;; - esac - # Need to link against all dependency_libs? - if test "$linkalldeplibs" = yes; then - deplibs="$deplib $deplibs" - else - # Need to hardcode shared library paths - # or/and link against static libraries - newdependency_libs="$deplib $newdependency_libs" - fi - if $opt_duplicate_deps ; then - case "$tmp_libs " in - *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;; - esac - fi - tmp_libs="$tmp_libs $deplib" - done # for deplib - continue - fi # $linkmode = prog... - - if test "$linkmode,$pass" = "prog,link"; then - if test -n "$library_names" && - { { test "$prefer_static_libs" = no || - test "$prefer_static_libs,$installed" = "built,yes"; } || - test -z "$old_library"; }; then - # We need to hardcode the library path - if test -n "$shlibpath_var" && test -z "$avoidtemprpath" ; then - # Make sure the rpath contains only unique directories. - case "$temp_rpath:" in - *"$absdir:"*) ;; - *) temp_rpath="$temp_rpath$absdir:" ;; - esac - fi - - # Hardcode the library path. - # Skip directories that are in the system default run-time - # search path. - case " $sys_lib_dlsearch_path " in - *" $absdir "*) ;; - *) - case "$compile_rpath " in - *" $absdir "*) ;; - *) compile_rpath="$compile_rpath $absdir" - esac - ;; - esac - case " $sys_lib_dlsearch_path " in - *" $libdir "*) ;; - *) - case "$finalize_rpath " in - *" $libdir "*) ;; - *) finalize_rpath="$finalize_rpath $libdir" - esac - ;; - esac - fi # $linkmode,$pass = prog,link... - - if test "$alldeplibs" = yes && - { test "$deplibs_check_method" = pass_all || - { test "$build_libtool_libs" = yes && - test -n "$library_names"; }; }; then - # We only need to search for static libraries - continue - fi - fi - - link_static=no # Whether the deplib will be linked statically - use_static_libs=$prefer_static_libs - if test "$use_static_libs" = built && test "$installed" = yes; then - use_static_libs=no - fi - if test -n "$library_names" && - { test "$use_static_libs" = no || test -z "$old_library"; }; then - case $host in - *cygwin* | *mingw* | *cegcc*) - # No point in relinking DLLs because paths are not encoded - notinst_deplibs="$notinst_deplibs $lib" - need_relink=no - ;; - *) - if test "$installed" = no; then - notinst_deplibs="$notinst_deplibs $lib" - need_relink=yes - fi - ;; - esac - # This is a shared library - - # Warn about portability, can't link against -module's on some - # systems (darwin). Don't bleat about dlopened modules though! - dlopenmodule="" - for dlpremoduletest in $dlprefiles; do - if test "X$dlpremoduletest" = "X$lib"; then - dlopenmodule="$dlpremoduletest" - break - fi - done - if test -z "$dlopenmodule" && test "$shouldnotlink" = yes && test "$pass" = link; then - $ECHO - if test "$linkmode" = prog; then - $ECHO "*** Warning: Linking the executable $output against the loadable module" - else - $ECHO "*** Warning: Linking the shared library $output against the loadable module" - fi - $ECHO "*** $linklib is not portable!" - fi - if test "$linkmode" = lib && - test "$hardcode_into_libs" = yes; then - # Hardcode the library path. - # Skip directories that are in the system default run-time - # search path. - case " $sys_lib_dlsearch_path " in - *" $absdir "*) ;; - *) - case "$compile_rpath " in - *" $absdir "*) ;; - *) compile_rpath="$compile_rpath $absdir" - esac - ;; - esac - case " $sys_lib_dlsearch_path " in - *" $libdir "*) ;; - *) - case "$finalize_rpath " in - *" $libdir "*) ;; - *) finalize_rpath="$finalize_rpath $libdir" - esac - ;; - esac - fi - - if test -n "$old_archive_from_expsyms_cmds"; then - # figure out the soname - set dummy $library_names - shift - realname="$1" - shift - libname=`eval "\\$ECHO \"$libname_spec\""` - # use dlname if we got it. it's perfectly good, no? - if test -n "$dlname"; then - soname="$dlname" - elif test -n "$soname_spec"; then - # bleh windows - case $host in - *cygwin* | mingw* | *cegcc*) - func_arith $current - $age - major=$func_arith_result - versuffix="-$major" - ;; - esac - eval soname=\"$soname_spec\" - else - soname="$realname" - fi - - # Make a new name for the extract_expsyms_cmds to use - soroot="$soname" - func_basename "$soroot" - soname="$func_basename_result" - func_stripname 'lib' '.dll' "$soname" - newlib=libimp-$func_stripname_result.a - - # If the library has no export list, then create one now - if test -f "$output_objdir/$soname-def"; then : - else - func_verbose "extracting exported symbol list from \`$soname'" - func_execute_cmds "$extract_expsyms_cmds" 'exit $?' - fi - - # Create $newlib - if test -f "$output_objdir/$newlib"; then :; else - func_verbose "generating import library for \`$soname'" - func_execute_cmds "$old_archive_from_expsyms_cmds" 'exit $?' - fi - # make sure the library variables are pointing to the new library - dir=$output_objdir - linklib=$newlib - fi # test -n "$old_archive_from_expsyms_cmds" - - if test "$linkmode" = prog || test "$mode" != relink; then - add_shlibpath= - add_dir= - add= - lib_linked=yes - case $hardcode_action in - immediate | unsupported) - if test "$hardcode_direct" = no; then - add="$dir/$linklib" - case $host in - *-*-sco3.2v5.0.[024]*) add_dir="-L$dir" ;; - *-*-sysv4*uw2*) add_dir="-L$dir" ;; - *-*-sysv5OpenUNIX* | *-*-sysv5UnixWare7.[01].[10]* | \ - *-*-unixware7*) add_dir="-L$dir" ;; - *-*-darwin* ) - # if the lib is a (non-dlopened) module then we can not - # link against it, someone is ignoring the earlier warnings - if /usr/bin/file -L $add 2> /dev/null | - $GREP ": [^:]* bundle" >/dev/null ; then - if test "X$dlopenmodule" != "X$lib"; then - $ECHO "*** Warning: lib $linklib is a module, not a shared library" - if test -z "$old_library" ; then - $ECHO - $ECHO "*** And there doesn't seem to be a static archive available" - $ECHO "*** The link will probably fail, sorry" - else - add="$dir/$old_library" - fi - elif test -n "$old_library"; then - add="$dir/$old_library" - fi - fi - esac - elif test "$hardcode_minus_L" = no; then - case $host in - *-*-sunos*) add_shlibpath="$dir" ;; - esac - add_dir="-L$dir" - add="-l$name" - elif test "$hardcode_shlibpath_var" = no; then - add_shlibpath="$dir" - add="-l$name" - else - lib_linked=no - fi - ;; - relink) - if test "$hardcode_direct" = yes && - test "$hardcode_direct_absolute" = no; then - add="$dir/$linklib" - elif test "$hardcode_minus_L" = yes; then - add_dir="-L$dir" - # Try looking first in the location we're being installed to. - if test -n "$inst_prefix_dir"; then - case $libdir in - [\\/]*) - add_dir="$add_dir -L$inst_prefix_dir$libdir" - ;; - esac - fi - add="-l$name" - elif test "$hardcode_shlibpath_var" = yes; then - add_shlibpath="$dir" - add="-l$name" - else - lib_linked=no - fi - ;; - *) lib_linked=no ;; - esac - - if test "$lib_linked" != yes; then - func_fatal_configuration "unsupported hardcode properties" - fi - - if test -n "$add_shlibpath"; then - case :$compile_shlibpath: in - *":$add_shlibpath:"*) ;; - *) compile_shlibpath="$compile_shlibpath$add_shlibpath:" ;; - esac - fi - if test "$linkmode" = prog; then - test -n "$add_dir" && compile_deplibs="$add_dir $compile_deplibs" - test -n "$add" && compile_deplibs="$add $compile_deplibs" - else - test -n "$add_dir" && deplibs="$add_dir $deplibs" - test -n "$add" && deplibs="$add $deplibs" - if test "$hardcode_direct" != yes && - test "$hardcode_minus_L" != yes && - test "$hardcode_shlibpath_var" = yes; then - case :$finalize_shlibpath: in - *":$libdir:"*) ;; - *) finalize_shlibpath="$finalize_shlibpath$libdir:" ;; - esac - fi - fi - fi - - if test "$linkmode" = prog || test "$mode" = relink; then - add_shlibpath= - add_dir= - add= - # Finalize command for both is simple: just hardcode it. - if test "$hardcode_direct" = yes && - test "$hardcode_direct_absolute" = no; then - add="$libdir/$linklib" - elif test "$hardcode_minus_L" = yes; then - add_dir="-L$libdir" - add="-l$name" - elif test "$hardcode_shlibpath_var" = yes; then - case :$finalize_shlibpath: in - *":$libdir:"*) ;; - *) finalize_shlibpath="$finalize_shlibpath$libdir:" ;; - esac - add="-l$name" - elif test "$hardcode_automatic" = yes; then - if test -n "$inst_prefix_dir" && - test -f "$inst_prefix_dir$libdir/$linklib" ; then - add="$inst_prefix_dir$libdir/$linklib" - else - add="$libdir/$linklib" - fi - else - # We cannot seem to hardcode it, guess we'll fake it. - add_dir="-L$libdir" - # Try looking first in the location we're being installed to. - if test -n "$inst_prefix_dir"; then - case $libdir in - [\\/]*) - add_dir="$add_dir -L$inst_prefix_dir$libdir" - ;; - esac - fi - add="-l$name" - fi - - if test "$linkmode" = prog; then - test -n "$add_dir" && finalize_deplibs="$add_dir $finalize_deplibs" - test -n "$add" && finalize_deplibs="$add $finalize_deplibs" - else - test -n "$add_dir" && deplibs="$add_dir $deplibs" - test -n "$add" && deplibs="$add $deplibs" - fi - fi - elif test "$linkmode" = prog; then - # Here we assume that one of hardcode_direct or hardcode_minus_L - # is not unsupported. This is valid on all known static and - # shared platforms. - if test "$hardcode_direct" != unsupported; then - test -n "$old_library" && linklib="$old_library" - compile_deplibs="$dir/$linklib $compile_deplibs" - finalize_deplibs="$dir/$linklib $finalize_deplibs" - else - compile_deplibs="-l$name -L$dir $compile_deplibs" - finalize_deplibs="-l$name -L$dir $finalize_deplibs" - fi - elif test "$build_libtool_libs" = yes; then - # Not a shared library - if test "$deplibs_check_method" != pass_all; then - # We're trying link a shared library against a static one - # but the system doesn't support it. - - # Just print a warning and add the library to dependency_libs so - # that the program can be linked against the static library. - $ECHO - $ECHO "*** Warning: This system can not link to static lib archive $lib." - $ECHO "*** I have the capability to make that library automatically link in when" - $ECHO "*** you link to this library. But I can only do this if you have a" - $ECHO "*** shared version of the library, which you do not appear to have." - if test "$module" = yes; then - $ECHO "*** But as you try to build a module library, libtool will still create " - $ECHO "*** a static module, that should work as long as the dlopening application" - $ECHO "*** is linked with the -dlopen flag to resolve symbols at runtime." - if test -z "$global_symbol_pipe"; then - $ECHO - $ECHO "*** However, this would only work if libtool was able to extract symbol" - $ECHO "*** lists from a program, using \`nm' or equivalent, but libtool could" - $ECHO "*** not find such a program. So, this module is probably useless." - $ECHO "*** \`nm' from GNU binutils and a full rebuild may help." - fi - if test "$build_old_libs" = no; then - build_libtool_libs=module - build_old_libs=yes - else - build_libtool_libs=no - fi - fi - else - deplibs="$dir/$old_library $deplibs" - link_static=yes - fi - fi # link shared/static library? - - if test "$linkmode" = lib; then - if test -n "$dependency_libs" && - { test "$hardcode_into_libs" != yes || - test "$build_old_libs" = yes || - test "$link_static" = yes; }; then - # Extract -R from dependency_libs - temp_deplibs= - for libdir in $dependency_libs; do - case $libdir in - -R*) func_stripname '-R' '' "$libdir" - temp_xrpath=$func_stripname_result - case " $xrpath " in - *" $temp_xrpath "*) ;; - *) xrpath="$xrpath $temp_xrpath";; - esac;; - *) temp_deplibs="$temp_deplibs $libdir";; - esac - done - dependency_libs="$temp_deplibs" - fi - - newlib_search_path="$newlib_search_path $absdir" - # Link against this library - test "$link_static" = no && newdependency_libs="$abs_ladir/$laname $newdependency_libs" - # ... and its dependency_libs - tmp_libs= - for deplib in $dependency_libs; do - newdependency_libs="$deplib $newdependency_libs" - if $opt_duplicate_deps ; then - case "$tmp_libs " in - *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;; - esac - fi - tmp_libs="$tmp_libs $deplib" - done - - if test "$link_all_deplibs" != no; then - # Add the search paths of all dependency libraries - for deplib in $dependency_libs; do - case $deplib in - -L*) path="$deplib" ;; - *.la) - func_dirname "$deplib" "" "." - dir="$func_dirname_result" - # We need an absolute path. - case $dir in - [\\/]* | [A-Za-z]:[\\/]*) absdir="$dir" ;; - *) - absdir=`cd "$dir" && pwd` - if test -z "$absdir"; then - func_warning "cannot determine absolute directory name of \`$dir'" - absdir="$dir" - fi - ;; - esac - if $GREP "^installed=no" $deplib > /dev/null; then - case $host in - *-*-darwin*) - depdepl= - eval deplibrary_names=`${SED} -n -e 's/^library_names=\(.*\)$/\1/p' $deplib` - if test -n "$deplibrary_names" ; then - for tmp in $deplibrary_names ; do - depdepl=$tmp - done - if test -f "$absdir/$objdir/$depdepl" ; then - depdepl="$absdir/$objdir/$depdepl" - darwin_install_name=`${OTOOL} -L $depdepl | awk '{if (NR == 2) {print $1;exit}}'` - if test -z "$darwin_install_name"; then - darwin_install_name=`${OTOOL64} -L $depdepl | awk '{if (NR == 2) {print $1;exit}}'` - fi - compiler_flags="$compiler_flags ${wl}-dylib_file ${wl}${darwin_install_name}:${depdepl}" - linker_flags="$linker_flags -dylib_file ${darwin_install_name}:${depdepl}" - path= - fi - fi - ;; - *) - path="-L$absdir/$objdir" - ;; - esac - else - eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $deplib` - test -z "$libdir" && \ - func_fatal_error "\`$deplib' is not a valid libtool archive" - test "$absdir" != "$libdir" && \ - func_warning "\`$deplib' seems to be moved" - - path="-L$absdir" - fi - ;; - esac - case " $deplibs " in - *" $path "*) ;; - *) deplibs="$path $deplibs" ;; - esac - done - fi # link_all_deplibs != no - fi # linkmode = lib - done # for deplib in $libs - if test "$pass" = link; then - if test "$linkmode" = "prog"; then - compile_deplibs="$new_inherited_linker_flags $compile_deplibs" - finalize_deplibs="$new_inherited_linker_flags $finalize_deplibs" - else - compiler_flags="$compiler_flags "`$ECHO "X $new_inherited_linker_flags" | $Xsed -e 's% \([^ $]*\).ltframework% -framework \1%g'` - fi - fi - dependency_libs="$newdependency_libs" - if test "$pass" = dlpreopen; then - # Link the dlpreopened libraries before other libraries - for deplib in $save_deplibs; do - deplibs="$deplib $deplibs" - done - fi - if test "$pass" != dlopen; then - if test "$pass" != conv; then - # Make sure lib_search_path contains only unique directories. - lib_search_path= - for dir in $newlib_search_path; do - case "$lib_search_path " in - *" $dir "*) ;; - *) lib_search_path="$lib_search_path $dir" ;; - esac - done - newlib_search_path= - fi - - if test "$linkmode,$pass" != "prog,link"; then - vars="deplibs" - else - vars="compile_deplibs finalize_deplibs" - fi - for var in $vars dependency_libs; do - # Add libraries to $var in reverse order - eval tmp_libs=\"\$$var\" - new_libs= - for deplib in $tmp_libs; do - # FIXME: Pedantically, this is the right thing to do, so - # that some nasty dependency loop isn't accidentally - # broken: - #new_libs="$deplib $new_libs" - # Pragmatically, this seems to cause very few problems in - # practice: - case $deplib in - -L*) new_libs="$deplib $new_libs" ;; - -R*) ;; - *) - # And here is the reason: when a library appears more - # than once as an explicit dependence of a library, or - # is implicitly linked in more than once by the - # compiler, it is considered special, and multiple - # occurrences thereof are not removed. Compare this - # with having the same library being listed as a - # dependency of multiple other libraries: in this case, - # we know (pedantically, we assume) the library does not - # need to be listed more than once, so we keep only the - # last copy. This is not always right, but it is rare - # enough that we require users that really mean to play - # such unportable linking tricks to link the library - # using -Wl,-lname, so that libtool does not consider it - # for duplicate removal. - case " $specialdeplibs " in - *" $deplib "*) new_libs="$deplib $new_libs" ;; - *) - case " $new_libs " in - *" $deplib "*) ;; - *) new_libs="$deplib $new_libs" ;; - esac - ;; - esac - ;; - esac - done - tmp_libs= - for deplib in $new_libs; do - case $deplib in - -L*) - case " $tmp_libs " in - *" $deplib "*) ;; - *) tmp_libs="$tmp_libs $deplib" ;; - esac - ;; - *) tmp_libs="$tmp_libs $deplib" ;; - esac - done - eval $var=\"$tmp_libs\" - done # for var - fi - # Last step: remove runtime libs from dependency_libs - # (they stay in deplibs) - tmp_libs= - for i in $dependency_libs ; do - case " $predeps $postdeps $compiler_lib_search_path " in - *" $i "*) - i="" - ;; - esac - if test -n "$i" ; then - tmp_libs="$tmp_libs $i" - fi - done - dependency_libs=$tmp_libs - done # for pass - if test "$linkmode" = prog; then - dlfiles="$newdlfiles" - fi - if test "$linkmode" = prog || test "$linkmode" = lib; then - dlprefiles="$newdlprefiles" - fi - - case $linkmode in - oldlib) - if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then - func_warning "\`-dlopen' is ignored for archives" - fi - - case " $deplibs" in - *\ -l* | *\ -L*) - func_warning "\`-l' and \`-L' are ignored for archives" ;; - esac - - test -n "$rpath" && \ - func_warning "\`-rpath' is ignored for archives" - - test -n "$xrpath" && \ - func_warning "\`-R' is ignored for archives" - - test -n "$vinfo" && \ - func_warning "\`-version-info/-version-number' is ignored for archives" - - test -n "$release" && \ - func_warning "\`-release' is ignored for archives" - - test -n "$export_symbols$export_symbols_regex" && \ - func_warning "\`-export-symbols' is ignored for archives" - - # Now set the variables for building old libraries. - build_libtool_libs=no - oldlibs="$output" - objs="$objs$old_deplibs" - ;; - - lib) - # Make sure we only generate libraries of the form `libNAME.la'. - case $outputname in - lib*) - func_stripname 'lib' '.la' "$outputname" - name=$func_stripname_result - eval shared_ext=\"$shrext_cmds\" - eval libname=\"$libname_spec\" - ;; - *) - test "$module" = no && \ - func_fatal_help "libtool library \`$output' must begin with \`lib'" - - if test "$need_lib_prefix" != no; then - # Add the "lib" prefix for modules if required - func_stripname '' '.la' "$outputname" - name=$func_stripname_result - eval shared_ext=\"$shrext_cmds\" - eval libname=\"$libname_spec\" - else - func_stripname '' '.la' "$outputname" - libname=$func_stripname_result - fi - ;; - esac - - if test -n "$objs"; then - if test "$deplibs_check_method" != pass_all; then - func_fatal_error "cannot build libtool library \`$output' from non-libtool objects on this host:$objs" - else - $ECHO - $ECHO "*** Warning: Linking the shared library $output against the non-libtool" - $ECHO "*** objects $objs is not portable!" - libobjs="$libobjs $objs" - fi - fi - - test "$dlself" != no && \ - func_warning "\`-dlopen self' is ignored for libtool libraries" - - set dummy $rpath - shift - test "$#" -gt 1 && \ - func_warning "ignoring multiple \`-rpath's for a libtool library" - - install_libdir="$1" - - oldlibs= - if test -z "$rpath"; then - if test "$build_libtool_libs" = yes; then - # Building a libtool convenience library. - # Some compilers have problems with a `.al' extension so - # convenience libraries should have the same extension an - # archive normally would. - oldlibs="$output_objdir/$libname.$libext $oldlibs" - build_libtool_libs=convenience - build_old_libs=yes - fi - - test -n "$vinfo" && \ - func_warning "\`-version-info/-version-number' is ignored for convenience libraries" - - test -n "$release" && \ - func_warning "\`-release' is ignored for convenience libraries" - else - - # Parse the version information argument. - save_ifs="$IFS"; IFS=':' - set dummy $vinfo 0 0 0 - shift - IFS="$save_ifs" - - test -n "$7" && \ - func_fatal_help "too many parameters to \`-version-info'" - - # convert absolute version numbers to libtool ages - # this retains compatibility with .la files and attempts - # to make the code below a bit more comprehensible - - case $vinfo_number in - yes) - number_major="$1" - number_minor="$2" - number_revision="$3" - # - # There are really only two kinds -- those that - # use the current revision as the major version - # and those that subtract age and use age as - # a minor version. But, then there is irix - # which has an extra 1 added just for fun - # - case $version_type in - darwin|linux|osf|windows|none) - func_arith $number_major + $number_minor - current=$func_arith_result - age="$number_minor" - revision="$number_revision" - ;; - freebsd-aout|freebsd-elf|sunos) - current="$number_major" - revision="$number_minor" - age="0" - ;; - irix|nonstopux) - func_arith $number_major + $number_minor - current=$func_arith_result - age="$number_minor" - revision="$number_minor" - lt_irix_increment=no - ;; - esac - ;; - no) - current="$1" - revision="$2" - age="$3" - ;; - esac - - # Check that each of the things are valid numbers. - case $current in - 0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;; - *) - func_error "CURRENT \`$current' must be a nonnegative integer" - func_fatal_error "\`$vinfo' is not valid version information" - ;; - esac - - case $revision in - 0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;; - *) - func_error "REVISION \`$revision' must be a nonnegative integer" - func_fatal_error "\`$vinfo' is not valid version information" - ;; - esac - - case $age in - 0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;; - *) - func_error "AGE \`$age' must be a nonnegative integer" - func_fatal_error "\`$vinfo' is not valid version information" - ;; - esac - - if test "$age" -gt "$current"; then - func_error "AGE \`$age' is greater than the current interface number \`$current'" - func_fatal_error "\`$vinfo' is not valid version information" - fi - - # Calculate the version variables. - major= - versuffix= - verstring= - case $version_type in - none) ;; - - darwin) - # Like Linux, but with the current version available in - # verstring for coding it into the library header - func_arith $current - $age - major=.$func_arith_result - versuffix="$major.$age.$revision" - # Darwin ld doesn't like 0 for these options... - func_arith $current + 1 - minor_current=$func_arith_result - xlcverstring="${wl}-compatibility_version ${wl}$minor_current ${wl}-current_version ${wl}$minor_current.$revision" - verstring="-compatibility_version $minor_current -current_version $minor_current.$revision" - ;; - - freebsd-aout) - major=".$current" - versuffix=".$current.$revision"; - ;; - - freebsd-elf) - major=".$current" - versuffix=".$current" - ;; - - irix | nonstopux) - if test "X$lt_irix_increment" = "Xno"; then - func_arith $current - $age - else - func_arith $current - $age + 1 - fi - major=$func_arith_result - - case $version_type in - nonstopux) verstring_prefix=nonstopux ;; - *) verstring_prefix=sgi ;; - esac - verstring="$verstring_prefix$major.$revision" - - # Add in all the interfaces that we are compatible with. - loop=$revision - while test "$loop" -ne 0; do - func_arith $revision - $loop - iface=$func_arith_result - func_arith $loop - 1 - loop=$func_arith_result - verstring="$verstring_prefix$major.$iface:$verstring" - done - - # Before this point, $major must not contain `.'. - major=.$major - versuffix="$major.$revision" - ;; - - linux) - func_arith $current - $age - major=.$func_arith_result - versuffix="$major.$age.$revision" - ;; - - osf) - func_arith $current - $age - major=.$func_arith_result - versuffix=".$current.$age.$revision" - verstring="$current.$age.$revision" - - # Add in all the interfaces that we are compatible with. - loop=$age - while test "$loop" -ne 0; do - func_arith $current - $loop - iface=$func_arith_result - func_arith $loop - 1 - loop=$func_arith_result - verstring="$verstring:${iface}.0" - done - - # Make executables depend on our current version. - verstring="$verstring:${current}.0" - ;; - - qnx) - major=".$current" - versuffix=".$current" - ;; - - sunos) - major=".$current" - versuffix=".$current.$revision" - ;; - - windows) - # Use '-' rather than '.', since we only want one - # extension on DOS 8.3 filesystems. - func_arith $current - $age - major=$func_arith_result - versuffix="-$major" - ;; - - *) - func_fatal_configuration "unknown library version type \`$version_type'" - ;; - esac - - # Clear the version info if we defaulted, and they specified a release. - if test -z "$vinfo" && test -n "$release"; then - major= - case $version_type in - darwin) - # we can't check for "0.0" in archive_cmds due to quoting - # problems, so we reset it completely - verstring= - ;; - *) - verstring="0.0" - ;; - esac - if test "$need_version" = no; then - versuffix= - else - versuffix=".0.0" - fi - fi - - # Remove version info from name if versioning should be avoided - if test "$avoid_version" = yes && test "$need_version" = no; then - major= - versuffix= - verstring="" - fi - - # Check to see if the archive will have undefined symbols. - if test "$allow_undefined" = yes; then - if test "$allow_undefined_flag" = unsupported; then - func_warning "undefined symbols not allowed in $host shared libraries" - build_libtool_libs=no - build_old_libs=yes - fi - else - # Don't allow undefined symbols. - allow_undefined_flag="$no_undefined_flag" - fi - - fi - - func_generate_dlsyms "$libname" "$libname" "yes" - libobjs="$libobjs $symfileobj" - test "X$libobjs" = "X " && libobjs= - - if test "$mode" != relink; then - # Remove our outputs, but don't remove object files since they - # may have been created when compiling PIC objects. - removelist= - tempremovelist=`$ECHO "$output_objdir/*"` - for p in $tempremovelist; do - case $p in - *.$objext | *.gcno) - ;; - $output_objdir/$outputname | $output_objdir/$libname.* | $output_objdir/${libname}${release}.*) - if test "X$precious_files_regex" != "X"; then - if $ECHO "$p" | $EGREP -e "$precious_files_regex" >/dev/null 2>&1 - then - continue - fi - fi - removelist="$removelist $p" - ;; - *) ;; - esac - done - test -n "$removelist" && \ - func_show_eval "${RM}r \$removelist" - fi - - # Now set the variables for building old libraries. - if test "$build_old_libs" = yes && test "$build_libtool_libs" != convenience ; then - oldlibs="$oldlibs $output_objdir/$libname.$libext" - - # Transform .lo files to .o files. - oldobjs="$objs "`$ECHO "X$libobjs" | $SP2NL | $Xsed -e '/\.'${libext}'$/d' -e "$lo2o" | $NL2SP` - fi - - # Eliminate all temporary directories. - #for path in $notinst_path; do - # lib_search_path=`$ECHO "X$lib_search_path " | $Xsed -e "s% $path % %g"` - # deplibs=`$ECHO "X$deplibs " | $Xsed -e "s% -L$path % %g"` - # dependency_libs=`$ECHO "X$dependency_libs " | $Xsed -e "s% -L$path % %g"` - #done - - if test -n "$xrpath"; then - # If the user specified any rpath flags, then add them. - temp_xrpath= - for libdir in $xrpath; do - temp_xrpath="$temp_xrpath -R$libdir" - case "$finalize_rpath " in - *" $libdir "*) ;; - *) finalize_rpath="$finalize_rpath $libdir" ;; - esac - done - if test "$hardcode_into_libs" != yes || test "$build_old_libs" = yes; then - dependency_libs="$temp_xrpath $dependency_libs" - fi - fi - - # Make sure dlfiles contains only unique files that won't be dlpreopened - old_dlfiles="$dlfiles" - dlfiles= - for lib in $old_dlfiles; do - case " $dlprefiles $dlfiles " in - *" $lib "*) ;; - *) dlfiles="$dlfiles $lib" ;; - esac - done - - # Make sure dlprefiles contains only unique files - old_dlprefiles="$dlprefiles" - dlprefiles= - for lib in $old_dlprefiles; do - case "$dlprefiles " in - *" $lib "*) ;; - *) dlprefiles="$dlprefiles $lib" ;; - esac - done - - if test "$build_libtool_libs" = yes; then - if test -n "$rpath"; then - case $host in - *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-*-beos* | *-cegcc*) - # these systems don't actually have a c library (as such)! - ;; - *-*-rhapsody* | *-*-darwin1.[012]) - # Rhapsody C library is in the System framework - deplibs="$deplibs System.ltframework" - ;; - *-*-netbsd*) - # Don't link with libc until the a.out ld.so is fixed. - ;; - *-*-openbsd* | *-*-freebsd* | *-*-dragonfly*) - # Do not include libc due to us having libc/libc_r. - ;; - *-*-sco3.2v5* | *-*-sco5v6*) - # Causes problems with __ctype - ;; - *-*-sysv4.2uw2* | *-*-sysv5* | *-*-unixware* | *-*-OpenUNIX*) - # Compiler inserts libc in the correct place for threads to work - ;; - *) - # Add libc to deplibs on all other systems if necessary. - if test "$build_libtool_need_lc" = "yes"; then - deplibs="$deplibs -lc" - fi - ;; - esac - fi - - # Transform deplibs into only deplibs that can be linked in shared. - name_save=$name - libname_save=$libname - release_save=$release - versuffix_save=$versuffix - major_save=$major - # I'm not sure if I'm treating the release correctly. I think - # release should show up in the -l (ie -lgmp5) so we don't want to - # add it in twice. Is that correct? - release="" - versuffix="" - major="" - newdeplibs= - droppeddeps=no - case $deplibs_check_method in - pass_all) - # Don't check for shared/static. Everything works. - # This might be a little naive. We might want to check - # whether the library exists or not. But this is on - # osf3 & osf4 and I'm not really sure... Just - # implementing what was already the behavior. - newdeplibs=$deplibs - ;; - test_compile) - # This code stresses the "libraries are programs" paradigm to its - # limits. Maybe even breaks it. We compile a program, linking it - # against the deplibs as a proxy for the library. Then we can check - # whether they linked in statically or dynamically with ldd. - $opt_dry_run || $RM conftest.c - cat > conftest.c <<EOF - int main() { return 0; } -EOF - $opt_dry_run || $RM conftest - if $LTCC $LTCFLAGS -o conftest conftest.c $deplibs; then - ldd_output=`ldd conftest` - for i in $deplibs; do - case $i in - -l*) - func_stripname -l '' "$i" - name=$func_stripname_result - if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then - case " $predeps $postdeps " in - *" $i "*) - newdeplibs="$newdeplibs $i" - i="" - ;; - esac - fi - if test -n "$i" ; then - libname=`eval "\\$ECHO \"$libname_spec\""` - deplib_matches=`eval "\\$ECHO \"$library_names_spec\""` - set dummy $deplib_matches; shift - deplib_match=$1 - if test `expr "$ldd_output" : ".*$deplib_match"` -ne 0 ; then - newdeplibs="$newdeplibs $i" - else - droppeddeps=yes - $ECHO - $ECHO "*** Warning: dynamic linker does not accept needed library $i." - $ECHO "*** I have the capability to make that library automatically link in when" - $ECHO "*** you link to this library. But I can only do this if you have a" - $ECHO "*** shared version of the library, which I believe you do not have" - $ECHO "*** because a test_compile did reveal that the linker did not use it for" - $ECHO "*** its dynamic dependency list that programs get resolved with at runtime." - fi - fi - ;; - *) - newdeplibs="$newdeplibs $i" - ;; - esac - done - else - # Error occurred in the first compile. Let's try to salvage - # the situation: Compile a separate program for each library. - for i in $deplibs; do - case $i in - -l*) - func_stripname -l '' "$i" - name=$func_stripname_result - $opt_dry_run || $RM conftest - if $LTCC $LTCFLAGS -o conftest conftest.c $i; then - ldd_output=`ldd conftest` - if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then - case " $predeps $postdeps " in - *" $i "*) - newdeplibs="$newdeplibs $i" - i="" - ;; - esac - fi - if test -n "$i" ; then - libname=`eval "\\$ECHO \"$libname_spec\""` - deplib_matches=`eval "\\$ECHO \"$library_names_spec\""` - set dummy $deplib_matches; shift - deplib_match=$1 - if test `expr "$ldd_output" : ".*$deplib_match"` -ne 0 ; then - newdeplibs="$newdeplibs $i" - else - droppeddeps=yes - $ECHO - $ECHO "*** Warning: dynamic linker does not accept needed library $i." - $ECHO "*** I have the capability to make that library automatically link in when" - $ECHO "*** you link to this library. But I can only do this if you have a" - $ECHO "*** shared version of the library, which you do not appear to have" - $ECHO "*** because a test_compile did reveal that the linker did not use this one" - $ECHO "*** as a dynamic dependency that programs can get resolved with at runtime." - fi - fi - else - droppeddeps=yes - $ECHO - $ECHO "*** Warning! Library $i is needed by this library but I was not able to" - $ECHO "*** make it link in! You will probably need to install it or some" - $ECHO "*** library that it depends on before this library will be fully" - $ECHO "*** functional. Installing it before continuing would be even better." - fi - ;; - *) - newdeplibs="$newdeplibs $i" - ;; - esac - done - fi - ;; - file_magic*) - set dummy $deplibs_check_method; shift - file_magic_regex=`expr "$deplibs_check_method" : "$1 \(.*\)"` - for a_deplib in $deplibs; do - case $a_deplib in - -l*) - func_stripname -l '' "$a_deplib" - name=$func_stripname_result - if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then - case " $predeps $postdeps " in - *" $a_deplib "*) - newdeplibs="$newdeplibs $a_deplib" - a_deplib="" - ;; - esac - fi - if test -n "$a_deplib" ; then - libname=`eval "\\$ECHO \"$libname_spec\""` - for i in $lib_search_path $sys_lib_search_path $shlib_search_path; do - potential_libs=`ls $i/$libname[.-]* 2>/dev/null` - for potent_lib in $potential_libs; do - # Follow soft links. - if ls -lLd "$potent_lib" 2>/dev/null | - $GREP " -> " >/dev/null; then - continue - fi - # The statement above tries to avoid entering an - # endless loop below, in case of cyclic links. - # We might still enter an endless loop, since a link - # loop can be closed while we follow links, - # but so what? - potlib="$potent_lib" - while test -h "$potlib" 2>/dev/null; do - potliblink=`ls -ld $potlib | ${SED} 's/.* -> //'` - case $potliblink in - [\\/]* | [A-Za-z]:[\\/]*) potlib="$potliblink";; - *) potlib=`$ECHO "X$potlib" | $Xsed -e 's,[^/]*$,,'`"$potliblink";; - esac - done - if eval $file_magic_cmd \"\$potlib\" 2>/dev/null | - $SED -e 10q | - $EGREP "$file_magic_regex" > /dev/null; then - newdeplibs="$newdeplibs $a_deplib" - a_deplib="" - break 2 - fi - done - done - fi - if test -n "$a_deplib" ; then - droppeddeps=yes - $ECHO - $ECHO "*** Warning: linker path does not have real file for library $a_deplib." - $ECHO "*** I have the capability to make that library automatically link in when" - $ECHO "*** you link to this library. But I can only do this if you have a" - $ECHO "*** shared version of the library, which you do not appear to have" - $ECHO "*** because I did check the linker path looking for a file starting" - if test -z "$potlib" ; then - $ECHO "*** with $libname but no candidates were found. (...for file magic test)" - else - $ECHO "*** with $libname and none of the candidates passed a file format test" - $ECHO "*** using a file magic. Last file checked: $potlib" - fi - fi - ;; - *) - # Add a -L argument. - newdeplibs="$newdeplibs $a_deplib" - ;; - esac - done # Gone through all deplibs. - ;; - match_pattern*) - set dummy $deplibs_check_method; shift - match_pattern_regex=`expr "$deplibs_check_method" : "$1 \(.*\)"` - for a_deplib in $deplibs; do - case $a_deplib in - -l*) - func_stripname -l '' "$a_deplib" - name=$func_stripname_result - if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then - case " $predeps $postdeps " in - *" $a_deplib "*) - newdeplibs="$newdeplibs $a_deplib" - a_deplib="" - ;; - esac - fi - if test -n "$a_deplib" ; then - libname=`eval "\\$ECHO \"$libname_spec\""` - for i in $lib_search_path $sys_lib_search_path $shlib_search_path; do - potential_libs=`ls $i/$libname[.-]* 2>/dev/null` - for potent_lib in $potential_libs; do - potlib="$potent_lib" # see symlink-check above in file_magic test - if eval "\$ECHO \"X$potent_lib\"" 2>/dev/null | $Xsed -e 10q | \ - $EGREP "$match_pattern_regex" > /dev/null; then - newdeplibs="$newdeplibs $a_deplib" - a_deplib="" - break 2 - fi - done - done - fi - if test -n "$a_deplib" ; then - droppeddeps=yes - $ECHO - $ECHO "*** Warning: linker path does not have real file for library $a_deplib." - $ECHO "*** I have the capability to make that library automatically link in when" - $ECHO "*** you link to this library. But I can only do this if you have a" - $ECHO "*** shared version of the library, which you do not appear to have" - $ECHO "*** because I did check the linker path looking for a file starting" - if test -z "$potlib" ; then - $ECHO "*** with $libname but no candidates were found. (...for regex pattern test)" - else - $ECHO "*** with $libname and none of the candidates passed a file format test" - $ECHO "*** using a regex pattern. Last file checked: $potlib" - fi - fi - ;; - *) - # Add a -L argument. - newdeplibs="$newdeplibs $a_deplib" - ;; - esac - done # Gone through all deplibs. - ;; - none | unknown | *) - newdeplibs="" - tmp_deplibs=`$ECHO "X $deplibs" | $Xsed \ - -e 's/ -lc$//' -e 's/ -[LR][^ ]*//g'` - if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then - for i in $predeps $postdeps ; do - # can't use Xsed below, because $i might contain '/' - tmp_deplibs=`$ECHO "X $tmp_deplibs" | $Xsed -e "s,$i,,"` - done - fi - if $ECHO "X $tmp_deplibs" | $Xsed -e 's/[ ]//g' | - $GREP . >/dev/null; then - $ECHO - if test "X$deplibs_check_method" = "Xnone"; then - $ECHO "*** Warning: inter-library dependencies are not supported in this platform." - else - $ECHO "*** Warning: inter-library dependencies are not known to be supported." - fi - $ECHO "*** All declared inter-library dependencies are being dropped." - droppeddeps=yes - fi - ;; - esac - versuffix=$versuffix_save - major=$major_save - release=$release_save - libname=$libname_save - name=$name_save - - case $host in - *-*-rhapsody* | *-*-darwin1.[012]) - # On Rhapsody replace the C library with the System framework - newdeplibs=`$ECHO "X $newdeplibs" | $Xsed -e 's/ -lc / System.ltframework /'` - ;; - esac - - if test "$droppeddeps" = yes; then - if test "$module" = yes; then - $ECHO - $ECHO "*** Warning: libtool could not satisfy all declared inter-library" - $ECHO "*** dependencies of module $libname. Therefore, libtool will create" - $ECHO "*** a static module, that should work as long as the dlopening" - $ECHO "*** application is linked with the -dlopen flag." - if test -z "$global_symbol_pipe"; then - $ECHO - $ECHO "*** However, this would only work if libtool was able to extract symbol" - $ECHO "*** lists from a program, using \`nm' or equivalent, but libtool could" - $ECHO "*** not find such a program. So, this module is probably useless." - $ECHO "*** \`nm' from GNU binutils and a full rebuild may help." - fi - if test "$build_old_libs" = no; then - oldlibs="$output_objdir/$libname.$libext" - build_libtool_libs=module - build_old_libs=yes - else - build_libtool_libs=no - fi - else - $ECHO "*** The inter-library dependencies that have been dropped here will be" - $ECHO "*** automatically added whenever a program is linked with this library" - $ECHO "*** or is declared to -dlopen it." - - if test "$allow_undefined" = no; then - $ECHO - $ECHO "*** Since this library must not contain undefined symbols," - $ECHO "*** because either the platform does not support them or" - $ECHO "*** it was explicitly requested with -no-undefined," - $ECHO "*** libtool will only create a static version of it." - if test "$build_old_libs" = no; then - oldlibs="$output_objdir/$libname.$libext" - build_libtool_libs=module - build_old_libs=yes - else - build_libtool_libs=no - fi - fi - fi - fi - # Done checking deplibs! - deplibs=$newdeplibs - fi - # Time to change all our "foo.ltframework" stuff back to "-framework foo" - case $host in - *-*-darwin*) - newdeplibs=`$ECHO "X $newdeplibs" | $Xsed -e 's% \([^ $]*\).ltframework% -framework \1%g'` - new_inherited_linker_flags=`$ECHO "X $new_inherited_linker_flags" | $Xsed -e 's% \([^ $]*\).ltframework% -framework \1%g'` - deplibs=`$ECHO "X $deplibs" | $Xsed -e 's% \([^ $]*\).ltframework% -framework \1%g'` - ;; - esac - - # move library search paths that coincide with paths to not yet - # installed libraries to the beginning of the library search list - new_libs= - for path in $notinst_path; do - case " $new_libs " in - *" -L$path/$objdir "*) ;; - *) - case " $deplibs " in - *" -L$path/$objdir "*) - new_libs="$new_libs -L$path/$objdir" ;; - esac - ;; - esac - done - for deplib in $deplibs; do - case $deplib in - -L*) - case " $new_libs " in - *" $deplib "*) ;; - *) new_libs="$new_libs $deplib" ;; - esac - ;; - *) new_libs="$new_libs $deplib" ;; - esac - done - deplibs="$new_libs" - - # All the library-specific variables (install_libdir is set above). - library_names= - old_library= - dlname= - - # Test again, we may have decided not to build it any more - if test "$build_libtool_libs" = yes; then - if test "$hardcode_into_libs" = yes; then - # Hardcode the library paths - hardcode_libdirs= - dep_rpath= - rpath="$finalize_rpath" - test "$mode" != relink && rpath="$compile_rpath$rpath" - for libdir in $rpath; do - if test -n "$hardcode_libdir_flag_spec"; then - if test -n "$hardcode_libdir_separator"; then - if test -z "$hardcode_libdirs"; then - hardcode_libdirs="$libdir" - else - # Just accumulate the unique libdirs. - case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in - *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*) - ;; - *) - hardcode_libdirs="$hardcode_libdirs$hardcode_libdir_separator$libdir" - ;; - esac - fi - else - eval flag=\"$hardcode_libdir_flag_spec\" - dep_rpath="$dep_rpath $flag" - fi - elif test -n "$runpath_var"; then - case "$perm_rpath " in - *" $libdir "*) ;; - *) perm_rpath="$perm_rpath $libdir" ;; - esac - fi - done - # Substitute the hardcoded libdirs into the rpath. - if test -n "$hardcode_libdir_separator" && - test -n "$hardcode_libdirs"; then - libdir="$hardcode_libdirs" - if test -n "$hardcode_libdir_flag_spec_ld"; then - eval dep_rpath=\"$hardcode_libdir_flag_spec_ld\" - else - eval dep_rpath=\"$hardcode_libdir_flag_spec\" - fi - fi - if test -n "$runpath_var" && test -n "$perm_rpath"; then - # We should set the runpath_var. - rpath= - for dir in $perm_rpath; do - rpath="$rpath$dir:" - done - eval "$runpath_var='$rpath\$$runpath_var'; export $runpath_var" - fi - test -n "$dep_rpath" && deplibs="$dep_rpath $deplibs" - fi - - shlibpath="$finalize_shlibpath" - test "$mode" != relink && shlibpath="$compile_shlibpath$shlibpath" - if test -n "$shlibpath"; then - eval "$shlibpath_var='$shlibpath\$$shlibpath_var'; export $shlibpath_var" - fi - - # Get the real and link names of the library. - eval shared_ext=\"$shrext_cmds\" - eval library_names=\"$library_names_spec\" - set dummy $library_names - shift - realname="$1" - shift - - if test -n "$soname_spec"; then - eval soname=\"$soname_spec\" - else - soname="$realname" - fi - if test -z "$dlname"; then - dlname=$soname - fi - - lib="$output_objdir/$realname" - linknames= - for link - do - linknames="$linknames $link" - done - - # Use standard objects if they are pic - test -z "$pic_flag" && libobjs=`$ECHO "X$libobjs" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP` - test "X$libobjs" = "X " && libobjs= - - delfiles= - if test -n "$export_symbols" && test -n "$include_expsyms"; then - $opt_dry_run || cp "$export_symbols" "$output_objdir/$libname.uexp" - export_symbols="$output_objdir/$libname.uexp" - delfiles="$delfiles $export_symbols" - fi - - orig_export_symbols= - case $host_os in - cygwin* | mingw* | cegcc*) - if test -n "$export_symbols" && test -z "$export_symbols_regex"; then - # exporting using user supplied symfile - if test "x`$SED 1q $export_symbols`" != xEXPORTS; then - # and it's NOT already a .def file. Must figure out - # which of the given symbols are data symbols and tag - # them as such. So, trigger use of export_symbols_cmds. - # export_symbols gets reassigned inside the "prepare - # the list of exported symbols" if statement, so the - # include_expsyms logic still works. - orig_export_symbols="$export_symbols" - export_symbols= - always_export_symbols=yes - fi - fi - ;; - esac - - # Prepare the list of exported symbols - if test -z "$export_symbols"; then - if test "$always_export_symbols" = yes || test -n "$export_symbols_regex"; then - func_verbose "generating symbol list for \`$libname.la'" - export_symbols="$output_objdir/$libname.exp" - $opt_dry_run || $RM $export_symbols - cmds=$export_symbols_cmds - save_ifs="$IFS"; IFS='~' - for cmd in $cmds; do - IFS="$save_ifs" - eval cmd=\"$cmd\" - func_len " $cmd" - len=$func_len_result - if test "$len" -lt "$max_cmd_len" || test "$max_cmd_len" -le -1; then - func_show_eval "$cmd" 'exit $?' - skipped_export=false - else - # The command line is too long to execute in one step. - func_verbose "using reloadable object file for export list..." - skipped_export=: - # Break out early, otherwise skipped_export may be - # set to false by a later but shorter cmd. - break - fi - done - IFS="$save_ifs" - if test -n "$export_symbols_regex" && test "X$skipped_export" != "X:"; then - func_show_eval '$EGREP -e "$export_symbols_regex" "$export_symbols" > "${export_symbols}T"' - func_show_eval '$MV "${export_symbols}T" "$export_symbols"' - fi - fi - fi - - if test -n "$export_symbols" && test -n "$include_expsyms"; then - tmp_export_symbols="$export_symbols" - test -n "$orig_export_symbols" && tmp_export_symbols="$orig_export_symbols" - $opt_dry_run || eval '$ECHO "X$include_expsyms" | $Xsed | $SP2NL >> "$tmp_export_symbols"' - fi - - if test "X$skipped_export" != "X:" && test -n "$orig_export_symbols"; then - # The given exports_symbols file has to be filtered, so filter it. - func_verbose "filter symbol list for \`$libname.la' to tag DATA exports" - # FIXME: $output_objdir/$libname.filter potentially contains lots of - # 's' commands which not all seds can handle. GNU sed should be fine - # though. Also, the filter scales superlinearly with the number of - # global variables. join(1) would be nice here, but unfortunately - # isn't a blessed tool. - $opt_dry_run || $SED -e '/[ ,]DATA/!d;s,\(.*\)\([ \,].*\),s|^\1$|\1\2|,' < $export_symbols > $output_objdir/$libname.filter - delfiles="$delfiles $export_symbols $output_objdir/$libname.filter" - export_symbols=$output_objdir/$libname.def - $opt_dry_run || $SED -f $output_objdir/$libname.filter < $orig_export_symbols > $export_symbols - fi - - tmp_deplibs= - for test_deplib in $deplibs; do - case " $convenience " in - *" $test_deplib "*) ;; - *) - tmp_deplibs="$tmp_deplibs $test_deplib" - ;; - esac - done - deplibs="$tmp_deplibs" - - if test -n "$convenience"; then - if test -n "$whole_archive_flag_spec" && - test "$compiler_needs_object" = yes && - test -z "$libobjs"; then - # extract the archives, so we have objects to list. - # TODO: could optimize this to just extract one archive. - whole_archive_flag_spec= - fi - if test -n "$whole_archive_flag_spec"; then - save_libobjs=$libobjs - eval libobjs=\"\$libobjs $whole_archive_flag_spec\" - test "X$libobjs" = "X " && libobjs= - else - gentop="$output_objdir/${outputname}x" - generated="$generated $gentop" - - func_extract_archives $gentop $convenience - libobjs="$libobjs $func_extract_archives_result" - test "X$libobjs" = "X " && libobjs= - fi - fi - - if test "$thread_safe" = yes && test -n "$thread_safe_flag_spec"; then - eval flag=\"$thread_safe_flag_spec\" - linker_flags="$linker_flags $flag" - fi - - # Make a backup of the uninstalled library when relinking - if test "$mode" = relink; then - $opt_dry_run || eval '(cd $output_objdir && $RM ${realname}U && $MV $realname ${realname}U)' || exit $? - fi - - # Do each of the archive commands. - if test "$module" = yes && test -n "$module_cmds" ; then - if test -n "$export_symbols" && test -n "$module_expsym_cmds"; then - eval test_cmds=\"$module_expsym_cmds\" - cmds=$module_expsym_cmds - else - eval test_cmds=\"$module_cmds\" - cmds=$module_cmds - fi - else - if test -n "$export_symbols" && test -n "$archive_expsym_cmds"; then - eval test_cmds=\"$archive_expsym_cmds\" - cmds=$archive_expsym_cmds - else - eval test_cmds=\"$archive_cmds\" - cmds=$archive_cmds - fi - fi - - if test "X$skipped_export" != "X:" && - func_len " $test_cmds" && - len=$func_len_result && - test "$len" -lt "$max_cmd_len" || test "$max_cmd_len" -le -1; then - : - else - # The command line is too long to link in one step, link piecewise - # or, if using GNU ld and skipped_export is not :, use a linker - # script. - - # Save the value of $output and $libobjs because we want to - # use them later. If we have whole_archive_flag_spec, we - # want to use save_libobjs as it was before - # whole_archive_flag_spec was expanded, because we can't - # assume the linker understands whole_archive_flag_spec. - # This may have to be revisited, in case too many - # convenience libraries get linked in and end up exceeding - # the spec. - if test -z "$convenience" || test -z "$whole_archive_flag_spec"; then - save_libobjs=$libobjs - fi - save_output=$output - output_la=`$ECHO "X$output" | $Xsed -e "$basename"` - - # Clear the reloadable object creation command queue and - # initialize k to one. - test_cmds= - concat_cmds= - objlist= - last_robj= - k=1 - - if test -n "$save_libobjs" && test "X$skipped_export" != "X:" && test "$with_gnu_ld" = yes; then - output=${output_objdir}/${output_la}.lnkscript - func_verbose "creating GNU ld script: $output" - $ECHO 'INPUT (' > $output - for obj in $save_libobjs - do - $ECHO "$obj" >> $output - done - $ECHO ')' >> $output - delfiles="$delfiles $output" - elif test -n "$save_libobjs" && test "X$skipped_export" != "X:" && test "X$file_list_spec" != X; then - output=${output_objdir}/${output_la}.lnk - func_verbose "creating linker input file list: $output" - : > $output - set x $save_libobjs - shift - firstobj= - if test "$compiler_needs_object" = yes; then - firstobj="$1 " - shift - fi - for obj - do - $ECHO "$obj" >> $output - done - delfiles="$delfiles $output" - output=$firstobj\"$file_list_spec$output\" - else - if test -n "$save_libobjs"; then - func_verbose "creating reloadable object files..." - output=$output_objdir/$output_la-${k}.$objext - eval test_cmds=\"$reload_cmds\" - func_len " $test_cmds" - len0=$func_len_result - len=$len0 - - # Loop over the list of objects to be linked. - for obj in $save_libobjs - do - func_len " $obj" - func_arith $len + $func_len_result - len=$func_arith_result - if test "X$objlist" = X || - test "$len" -lt "$max_cmd_len"; then - func_append objlist " $obj" - else - # The command $test_cmds is almost too long, add a - # command to the queue. - if test "$k" -eq 1 ; then - # The first file doesn't have a previous command to add. - eval concat_cmds=\"$reload_cmds $objlist $last_robj\" - else - # All subsequent reloadable object files will link in - # the last one created. - eval concat_cmds=\"\$concat_cmds~$reload_cmds $objlist $last_robj~\$RM $last_robj\" - fi - last_robj=$output_objdir/$output_la-${k}.$objext - func_arith $k + 1 - k=$func_arith_result - output=$output_objdir/$output_la-${k}.$objext - objlist=$obj - func_len " $last_robj" - func_arith $len0 + $func_len_result - len=$func_arith_result - fi - done - # Handle the remaining objects by creating one last - # reloadable object file. All subsequent reloadable object - # files will link in the last one created. - test -z "$concat_cmds" || concat_cmds=$concat_cmds~ - eval concat_cmds=\"\${concat_cmds}$reload_cmds $objlist $last_robj\" - if test -n "$last_robj"; then - eval concat_cmds=\"\${concat_cmds}~\$RM $last_robj\" - fi - delfiles="$delfiles $output" - - else - output= - fi - - if ${skipped_export-false}; then - func_verbose "generating symbol list for \`$libname.la'" - export_symbols="$output_objdir/$libname.exp" - $opt_dry_run || $RM $export_symbols - libobjs=$output - # Append the command to create the export file. - test -z "$concat_cmds" || concat_cmds=$concat_cmds~ - eval concat_cmds=\"\$concat_cmds$export_symbols_cmds\" - if test -n "$last_robj"; then - eval concat_cmds=\"\$concat_cmds~\$RM $last_robj\" - fi - fi - - test -n "$save_libobjs" && - func_verbose "creating a temporary reloadable object file: $output" - - # Loop through the commands generated above and execute them. - save_ifs="$IFS"; IFS='~' - for cmd in $concat_cmds; do - IFS="$save_ifs" - $opt_silent || { - func_quote_for_expand "$cmd" - eval "func_echo $func_quote_for_expand_result" - } - $opt_dry_run || eval "$cmd" || { - lt_exit=$? - - # Restore the uninstalled library and exit - if test "$mode" = relink; then - ( cd "$output_objdir" && \ - $RM "${realname}T" && \ - $MV "${realname}U" "$realname" ) - fi - - exit $lt_exit - } - done - IFS="$save_ifs" - - if test -n "$export_symbols_regex" && ${skipped_export-false}; then - func_show_eval '$EGREP -e "$export_symbols_regex" "$export_symbols" > "${export_symbols}T"' - func_show_eval '$MV "${export_symbols}T" "$export_symbols"' - fi - fi - - if ${skipped_export-false}; then - if test -n "$export_symbols" && test -n "$include_expsyms"; then - tmp_export_symbols="$export_symbols" - test -n "$orig_export_symbols" && tmp_export_symbols="$orig_export_symbols" - $opt_dry_run || eval '$ECHO "X$include_expsyms" | $Xsed | $SP2NL >> "$tmp_export_symbols"' - fi - - if test -n "$orig_export_symbols"; then - # The given exports_symbols file has to be filtered, so filter it. - func_verbose "filter symbol list for \`$libname.la' to tag DATA exports" - # FIXME: $output_objdir/$libname.filter potentially contains lots of - # 's' commands which not all seds can handle. GNU sed should be fine - # though. Also, the filter scales superlinearly with the number of - # global variables. join(1) would be nice here, but unfortunately - # isn't a blessed tool. - $opt_dry_run || $SED -e '/[ ,]DATA/!d;s,\(.*\)\([ \,].*\),s|^\1$|\1\2|,' < $export_symbols > $output_objdir/$libname.filter - delfiles="$delfiles $export_symbols $output_objdir/$libname.filter" - export_symbols=$output_objdir/$libname.def - $opt_dry_run || $SED -f $output_objdir/$libname.filter < $orig_export_symbols > $export_symbols - fi - fi - - libobjs=$output - # Restore the value of output. - output=$save_output - - if test -n "$convenience" && test -n "$whole_archive_flag_spec"; then - eval libobjs=\"\$libobjs $whole_archive_flag_spec\" - test "X$libobjs" = "X " && libobjs= - fi - # Expand the library linking commands again to reset the - # value of $libobjs for piecewise linking. - - # Do each of the archive commands. - if test "$module" = yes && test -n "$module_cmds" ; then - if test -n "$export_symbols" && test -n "$module_expsym_cmds"; then - cmds=$module_expsym_cmds - else - cmds=$module_cmds - fi - else - if test -n "$export_symbols" && test -n "$archive_expsym_cmds"; then - cmds=$archive_expsym_cmds - else - cmds=$archive_cmds - fi - fi - fi - - if test -n "$delfiles"; then - # Append the command to remove temporary files to $cmds. - eval cmds=\"\$cmds~\$RM $delfiles\" - fi - - # Add any objects from preloaded convenience libraries - if test -n "$dlprefiles"; then - gentop="$output_objdir/${outputname}x" - generated="$generated $gentop" - - func_extract_archives $gentop $dlprefiles - libobjs="$libobjs $func_extract_archives_result" - test "X$libobjs" = "X " && libobjs= - fi - - save_ifs="$IFS"; IFS='~' - for cmd in $cmds; do - IFS="$save_ifs" - eval cmd=\"$cmd\" - $opt_silent || { - func_quote_for_expand "$cmd" - eval "func_echo $func_quote_for_expand_result" - } - $opt_dry_run || eval "$cmd" || { - lt_exit=$? - - # Restore the uninstalled library and exit - if test "$mode" = relink; then - ( cd "$output_objdir" && \ - $RM "${realname}T" && \ - $MV "${realname}U" "$realname" ) - fi - - exit $lt_exit - } - done - IFS="$save_ifs" - - # Restore the uninstalled library and exit - if test "$mode" = relink; then - $opt_dry_run || eval '(cd $output_objdir && $RM ${realname}T && $MV $realname ${realname}T && $MV ${realname}U $realname)' || exit $? - - if test -n "$convenience"; then - if test -z "$whole_archive_flag_spec"; then - func_show_eval '${RM}r "$gentop"' - fi - fi - - exit $EXIT_SUCCESS - fi - - # Create links to the real library. - for linkname in $linknames; do - if test "$realname" != "$linkname"; then - func_show_eval '(cd "$output_objdir" && $RM "$linkname" && $LN_S "$realname" "$linkname")' 'exit $?' - fi - done - - # If -module or -export-dynamic was specified, set the dlname. - if test "$module" = yes || test "$export_dynamic" = yes; then - # On all known operating systems, these are identical. - dlname="$soname" - fi - fi - ;; - - obj) - if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then - func_warning "\`-dlopen' is ignored for objects" - fi - - case " $deplibs" in - *\ -l* | *\ -L*) - func_warning "\`-l' and \`-L' are ignored for objects" ;; - esac - - test -n "$rpath" && \ - func_warning "\`-rpath' is ignored for objects" - - test -n "$xrpath" && \ - func_warning "\`-R' is ignored for objects" - - test -n "$vinfo" && \ - func_warning "\`-version-info' is ignored for objects" - - test -n "$release" && \ - func_warning "\`-release' is ignored for objects" - - case $output in - *.lo) - test -n "$objs$old_deplibs" && \ - func_fatal_error "cannot build library object \`$output' from non-libtool objects" - - libobj=$output - func_lo2o "$libobj" - obj=$func_lo2o_result - ;; - *) - libobj= - obj="$output" - ;; - esac - - # Delete the old objects. - $opt_dry_run || $RM $obj $libobj - - # Objects from convenience libraries. This assumes - # single-version convenience libraries. Whenever we create - # different ones for PIC/non-PIC, this we'll have to duplicate - # the extraction. - reload_conv_objs= - gentop= - # reload_cmds runs $LD directly, so let us get rid of - # -Wl from whole_archive_flag_spec and hope we can get by with - # turning comma into space.. - wl= - - if test -n "$convenience"; then - if test -n "$whole_archive_flag_spec"; then - eval tmp_whole_archive_flags=\"$whole_archive_flag_spec\" - reload_conv_objs=$reload_objs\ `$ECHO "X$tmp_whole_archive_flags" | $Xsed -e 's|,| |g'` - else - gentop="$output_objdir/${obj}x" - generated="$generated $gentop" - - func_extract_archives $gentop $convenience - reload_conv_objs="$reload_objs $func_extract_archives_result" - fi - fi - - # Create the old-style object. - reload_objs="$objs$old_deplibs "`$ECHO "X$libobjs" | $SP2NL | $Xsed -e '/\.'${libext}$'/d' -e '/\.lib$/d' -e "$lo2o" | $NL2SP`" $reload_conv_objs" ### testsuite: skip nested quoting test - - output="$obj" - func_execute_cmds "$reload_cmds" 'exit $?' - - # Exit if we aren't doing a library object file. - if test -z "$libobj"; then - if test -n "$gentop"; then - func_show_eval '${RM}r "$gentop"' - fi - - exit $EXIT_SUCCESS - fi - - if test "$build_libtool_libs" != yes; then - if test -n "$gentop"; then - func_show_eval '${RM}r "$gentop"' - fi - - # Create an invalid libtool object if no PIC, so that we don't - # accidentally link it into a program. - # $show "echo timestamp > $libobj" - # $opt_dry_run || eval "echo timestamp > $libobj" || exit $? - exit $EXIT_SUCCESS - fi - - if test -n "$pic_flag" || test "$pic_mode" != default; then - # Only do commands if we really have different PIC objects. - reload_objs="$libobjs $reload_conv_objs" - output="$libobj" - func_execute_cmds "$reload_cmds" 'exit $?' - fi - - if test -n "$gentop"; then - func_show_eval '${RM}r "$gentop"' - fi - - exit $EXIT_SUCCESS - ;; - - prog) - case $host in - *cygwin*) func_stripname '' '.exe' "$output" - output=$func_stripname_result.exe;; - esac - test -n "$vinfo" && \ - func_warning "\`-version-info' is ignored for programs" - - test -n "$release" && \ - func_warning "\`-release' is ignored for programs" - - test "$preload" = yes \ - && test "$dlopen_support" = unknown \ - && test "$dlopen_self" = unknown \ - && test "$dlopen_self_static" = unknown && \ - func_warning "\`LT_INIT([dlopen])' not used. Assuming no dlopen support." - - case $host in - *-*-rhapsody* | *-*-darwin1.[012]) - # On Rhapsody replace the C library is the System framework - compile_deplibs=`$ECHO "X $compile_deplibs" | $Xsed -e 's/ -lc / System.ltframework /'` - finalize_deplibs=`$ECHO "X $finalize_deplibs" | $Xsed -e 's/ -lc / System.ltframework /'` - ;; - esac - - case $host in - *-*-darwin*) - # Don't allow lazy linking, it breaks C++ global constructors - # But is supposedly fixed on 10.4 or later (yay!). - if test "$tagname" = CXX ; then - case ${MACOSX_DEPLOYMENT_TARGET-10.0} in - 10.[0123]) - compile_command="$compile_command ${wl}-bind_at_load" - finalize_command="$finalize_command ${wl}-bind_at_load" - ;; - esac - fi - # Time to change all our "foo.ltframework" stuff back to "-framework foo" - compile_deplibs=`$ECHO "X $compile_deplibs" | $Xsed -e 's% \([^ $]*\).ltframework% -framework \1%g'` - finalize_deplibs=`$ECHO "X $finalize_deplibs" | $Xsed -e 's% \([^ $]*\).ltframework% -framework \1%g'` - ;; - esac - - - # move library search paths that coincide with paths to not yet - # installed libraries to the beginning of the library search list - new_libs= - for path in $notinst_path; do - case " $new_libs " in - *" -L$path/$objdir "*) ;; - *) - case " $compile_deplibs " in - *" -L$path/$objdir "*) - new_libs="$new_libs -L$path/$objdir" ;; - esac - ;; - esac - done - for deplib in $compile_deplibs; do - case $deplib in - -L*) - case " $new_libs " in - *" $deplib "*) ;; - *) new_libs="$new_libs $deplib" ;; - esac - ;; - *) new_libs="$new_libs $deplib" ;; - esac - done - compile_deplibs="$new_libs" - - - compile_command="$compile_command $compile_deplibs" - finalize_command="$finalize_command $finalize_deplibs" - - if test -n "$rpath$xrpath"; then - # If the user specified any rpath flags, then add them. - for libdir in $rpath $xrpath; do - # This is the magic to use -rpath. - case "$finalize_rpath " in - *" $libdir "*) ;; - *) finalize_rpath="$finalize_rpath $libdir" ;; - esac - done - fi - - # Now hardcode the library paths - rpath= - hardcode_libdirs= - for libdir in $compile_rpath $finalize_rpath; do - if test -n "$hardcode_libdir_flag_spec"; then - if test -n "$hardcode_libdir_separator"; then - if test -z "$hardcode_libdirs"; then - hardcode_libdirs="$libdir" - else - # Just accumulate the unique libdirs. - case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in - *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*) - ;; - *) - hardcode_libdirs="$hardcode_libdirs$hardcode_libdir_separator$libdir" - ;; - esac - fi - else - eval flag=\"$hardcode_libdir_flag_spec\" - rpath="$rpath $flag" - fi - elif test -n "$runpath_var"; then - case "$perm_rpath " in - *" $libdir "*) ;; - *) perm_rpath="$perm_rpath $libdir" ;; - esac - fi - case $host in - *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-cegcc*) - testbindir=`${ECHO} "$libdir" | ${SED} -e 's*/lib$*/bin*'` - case :$dllsearchpath: in - *":$libdir:"*) ;; - ::) dllsearchpath=$libdir;; - *) dllsearchpath="$dllsearchpath:$libdir";; - esac - case :$dllsearchpath: in - *":$testbindir:"*) ;; - ::) dllsearchpath=$testbindir;; - *) dllsearchpath="$dllsearchpath:$testbindir";; - esac - ;; - esac - done - # Substitute the hardcoded libdirs into the rpath. - if test -n "$hardcode_libdir_separator" && - test -n "$hardcode_libdirs"; then - libdir="$hardcode_libdirs" - eval rpath=\" $hardcode_libdir_flag_spec\" - fi - compile_rpath="$rpath" - - rpath= - hardcode_libdirs= - for libdir in $finalize_rpath; do - if test -n "$hardcode_libdir_flag_spec"; then - if test -n "$hardcode_libdir_separator"; then - if test -z "$hardcode_libdirs"; then - hardcode_libdirs="$libdir" - else - # Just accumulate the unique libdirs. - case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in - *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*) - ;; - *) - hardcode_libdirs="$hardcode_libdirs$hardcode_libdir_separator$libdir" - ;; - esac - fi - else - eval flag=\"$hardcode_libdir_flag_spec\" - rpath="$rpath $flag" - fi - elif test -n "$runpath_var"; then - case "$finalize_perm_rpath " in - *" $libdir "*) ;; - *) finalize_perm_rpath="$finalize_perm_rpath $libdir" ;; - esac - fi - done - # Substitute the hardcoded libdirs into the rpath. - if test -n "$hardcode_libdir_separator" && - test -n "$hardcode_libdirs"; then - libdir="$hardcode_libdirs" - eval rpath=\" $hardcode_libdir_flag_spec\" - fi - finalize_rpath="$rpath" - - if test -n "$libobjs" && test "$build_old_libs" = yes; then - # Transform all the library objects into standard objects. - compile_command=`$ECHO "X$compile_command" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP` - finalize_command=`$ECHO "X$finalize_command" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP` - fi - - func_generate_dlsyms "$outputname" "@PROGRAM@" "no" - - # template prelinking step - if test -n "$prelink_cmds"; then - func_execute_cmds "$prelink_cmds" 'exit $?' - fi - - wrappers_required=yes - case $host in - *cygwin* | *mingw* ) - if test "$build_libtool_libs" != yes; then - wrappers_required=no - fi - ;; - *cegcc) - # Disable wrappers for cegcc, we are cross compiling anyway. - wrappers_required=no - ;; - *) - if test "$need_relink" = no || test "$build_libtool_libs" != yes; then - wrappers_required=no - fi - ;; - esac - if test "$wrappers_required" = no; then - # Replace the output file specification. - compile_command=`$ECHO "X$compile_command" | $Xsed -e 's%@OUTPUT@%'"$output"'%g'` - link_command="$compile_command$compile_rpath" - - # We have no uninstalled library dependencies, so finalize right now. - exit_status=0 - func_show_eval "$link_command" 'exit_status=$?' - - # Delete the generated files. - if test -f "$output_objdir/${outputname}S.${objext}"; then - func_show_eval '$RM "$output_objdir/${outputname}S.${objext}"' - fi - - exit $exit_status - fi - - if test -n "$compile_shlibpath$finalize_shlibpath"; then - compile_command="$shlibpath_var=\"$compile_shlibpath$finalize_shlibpath\$$shlibpath_var\" $compile_command" - fi - if test -n "$finalize_shlibpath"; then - finalize_command="$shlibpath_var=\"$finalize_shlibpath\$$shlibpath_var\" $finalize_command" - fi - - compile_var= - finalize_var= - if test -n "$runpath_var"; then - if test -n "$perm_rpath"; then - # We should set the runpath_var. - rpath= - for dir in $perm_rpath; do - rpath="$rpath$dir:" - done - compile_var="$runpath_var=\"$rpath\$$runpath_var\" " - fi - if test -n "$finalize_perm_rpath"; then - # We should set the runpath_var. - rpath= - for dir in $finalize_perm_rpath; do - rpath="$rpath$dir:" - done - finalize_var="$runpath_var=\"$rpath\$$runpath_var\" " - fi - fi - - if test "$no_install" = yes; then - # We don't need to create a wrapper script. - link_command="$compile_var$compile_command$compile_rpath" - # Replace the output file specification. - link_command=`$ECHO "X$link_command" | $Xsed -e 's%@OUTPUT@%'"$output"'%g'` - # Delete the old output file. - $opt_dry_run || $RM $output - # Link the executable and exit - func_show_eval "$link_command" 'exit $?' - exit $EXIT_SUCCESS - fi - - if test "$hardcode_action" = relink; then - # Fast installation is not supported - link_command="$compile_var$compile_command$compile_rpath" - relink_command="$finalize_var$finalize_command$finalize_rpath" - - func_warning "this platform does not like uninstalled shared libraries" - func_warning "\`$output' will be relinked during installation" - else - if test "$fast_install" != no; then - link_command="$finalize_var$compile_command$finalize_rpath" - if test "$fast_install" = yes; then - relink_command=`$ECHO "X$compile_var$compile_command$compile_rpath" | $Xsed -e 's%@OUTPUT@%\$progdir/\$file%g'` - else - # fast_install is set to needless - relink_command= - fi - else - link_command="$compile_var$compile_command$compile_rpath" - relink_command="$finalize_var$finalize_command$finalize_rpath" - fi - fi - - # Replace the output file specification. - link_command=`$ECHO "X$link_command" | $Xsed -e 's%@OUTPUT@%'"$output_objdir/$outputname"'%g'` - - # Delete the old output files. - $opt_dry_run || $RM $output $output_objdir/$outputname $output_objdir/lt-$outputname - - func_show_eval "$link_command" 'exit $?' - - # Now create the wrapper script. - func_verbose "creating $output" - - # Quote the relink command for shipping. - if test -n "$relink_command"; then - # Preserve any variables that may affect compiler behavior - for var in $variables_saved_for_relink; do - if eval test -z \"\${$var+set}\"; then - relink_command="{ test -z \"\${$var+set}\" || $lt_unset $var || { $var=; export $var; }; }; $relink_command" - elif eval var_value=\$$var; test -z "$var_value"; then - relink_command="$var=; export $var; $relink_command" - else - func_quote_for_eval "$var_value" - relink_command="$var=$func_quote_for_eval_result; export $var; $relink_command" - fi - done - relink_command="(cd `pwd`; $relink_command)" - relink_command=`$ECHO "X$relink_command" | $Xsed -e "$sed_quote_subst"` - fi - - # Quote $ECHO for shipping. - if test "X$ECHO" = "X$SHELL $progpath --fallback-echo"; then - case $progpath in - [\\/]* | [A-Za-z]:[\\/]*) qecho="$SHELL $progpath --fallback-echo";; - *) qecho="$SHELL `pwd`/$progpath --fallback-echo";; - esac - qecho=`$ECHO "X$qecho" | $Xsed -e "$sed_quote_subst"` - else - qecho=`$ECHO "X$ECHO" | $Xsed -e "$sed_quote_subst"` - fi - - # Only actually do things if not in dry run mode. - $opt_dry_run || { - # win32 will think the script is a binary if it has - # a .exe suffix, so we strip it off here. - case $output in - *.exe) func_stripname '' '.exe' "$output" - output=$func_stripname_result ;; - esac - # test for cygwin because mv fails w/o .exe extensions - case $host in - *cygwin*) - exeext=.exe - func_stripname '' '.exe' "$outputname" - outputname=$func_stripname_result ;; - *) exeext= ;; - esac - case $host in - *cygwin* | *mingw* ) - func_dirname_and_basename "$output" "" "." - output_name=$func_basename_result - output_path=$func_dirname_result - cwrappersource="$output_path/$objdir/lt-$output_name.c" - cwrapper="$output_path/$output_name.exe" - $RM $cwrappersource $cwrapper - trap "$RM $cwrappersource $cwrapper; exit $EXIT_FAILURE" 1 2 15 - - func_emit_cwrapperexe_src > $cwrappersource - - # The wrapper executable is built using the $host compiler, - # because it contains $host paths and files. If cross- - # compiling, it, like the target executable, must be - # executed on the $host or under an emulation environment. - $opt_dry_run || { - $LTCC $LTCFLAGS -o $cwrapper $cwrappersource - $STRIP $cwrapper - } - - # Now, create the wrapper script for func_source use: - func_ltwrapper_scriptname $cwrapper - $RM $func_ltwrapper_scriptname_result - trap "$RM $func_ltwrapper_scriptname_result; exit $EXIT_FAILURE" 1 2 15 - $opt_dry_run || { - # note: this script will not be executed, so do not chmod. - if test "x$build" = "x$host" ; then - $cwrapper --lt-dump-script > $func_ltwrapper_scriptname_result - else - func_emit_wrapper no > $func_ltwrapper_scriptname_result - fi - } - ;; - * ) - $RM $output - trap "$RM $output; exit $EXIT_FAILURE" 1 2 15 - - func_emit_wrapper no > $output - chmod +x $output - ;; - esac - } - exit $EXIT_SUCCESS - ;; - esac - - # See if we need to build an old-fashioned archive. - for oldlib in $oldlibs; do - - if test "$build_libtool_libs" = convenience; then - oldobjs="$libobjs_save $symfileobj" - addlibs="$convenience" - build_libtool_libs=no - else - if test "$build_libtool_libs" = module; then - oldobjs="$libobjs_save" - build_libtool_libs=no - else - oldobjs="$old_deplibs $non_pic_objects" - if test "$preload" = yes && test -f "$symfileobj"; then - oldobjs="$oldobjs $symfileobj" - fi - fi - addlibs="$old_convenience" - fi - - if test -n "$addlibs"; then - gentop="$output_objdir/${outputname}x" - generated="$generated $gentop" - - func_extract_archives $gentop $addlibs - oldobjs="$oldobjs $func_extract_archives_result" - fi - - # Do each command in the archive commands. - if test -n "$old_archive_from_new_cmds" && test "$build_libtool_libs" = yes; then - cmds=$old_archive_from_new_cmds - else - - # Add any objects from preloaded convenience libraries - if test -n "$dlprefiles"; then - gentop="$output_objdir/${outputname}x" - generated="$generated $gentop" - - func_extract_archives $gentop $dlprefiles - oldobjs="$oldobjs $func_extract_archives_result" - fi - - # POSIX demands no paths to be encoded in archives. We have - # to avoid creating archives with duplicate basenames if we - # might have to extract them afterwards, e.g., when creating a - # static archive out of a convenience library, or when linking - # the entirety of a libtool archive into another (currently - # not supported by libtool). - if (for obj in $oldobjs - do - func_basename "$obj" - $ECHO "$func_basename_result" - done | sort | sort -uc >/dev/null 2>&1); then - : - else - $ECHO "copying selected object files to avoid basename conflicts..." - gentop="$output_objdir/${outputname}x" - generated="$generated $gentop" - func_mkdir_p "$gentop" - save_oldobjs=$oldobjs - oldobjs= - counter=1 - for obj in $save_oldobjs - do - func_basename "$obj" - objbase="$func_basename_result" - case " $oldobjs " in - " ") oldobjs=$obj ;; - *[\ /]"$objbase "*) - while :; do - # Make sure we don't pick an alternate name that also - # overlaps. - newobj=lt$counter-$objbase - func_arith $counter + 1 - counter=$func_arith_result - case " $oldobjs " in - *[\ /]"$newobj "*) ;; - *) if test ! -f "$gentop/$newobj"; then break; fi ;; - esac - done - func_show_eval "ln $obj $gentop/$newobj || cp $obj $gentop/$newobj" - oldobjs="$oldobjs $gentop/$newobj" - ;; - *) oldobjs="$oldobjs $obj" ;; - esac - done - fi - eval cmds=\"$old_archive_cmds\" - - func_len " $cmds" - len=$func_len_result - if test "$len" -lt "$max_cmd_len" || test "$max_cmd_len" -le -1; then - cmds=$old_archive_cmds - else - # the command line is too long to link in one step, link in parts - func_verbose "using piecewise archive linking..." - save_RANLIB=$RANLIB - RANLIB=: - objlist= - concat_cmds= - save_oldobjs=$oldobjs - oldobjs= - # Is there a better way of finding the last object in the list? - for obj in $save_oldobjs - do - last_oldobj=$obj - done - eval test_cmds=\"$old_archive_cmds\" - func_len " $test_cmds" - len0=$func_len_result - len=$len0 - for obj in $save_oldobjs - do - func_len " $obj" - func_arith $len + $func_len_result - len=$func_arith_result - func_append objlist " $obj" - if test "$len" -lt "$max_cmd_len"; then - : - else - # the above command should be used before it gets too long - oldobjs=$objlist - if test "$obj" = "$last_oldobj" ; then - RANLIB=$save_RANLIB - fi - test -z "$concat_cmds" || concat_cmds=$concat_cmds~ - eval concat_cmds=\"\${concat_cmds}$old_archive_cmds\" - objlist= - len=$len0 - fi - done - RANLIB=$save_RANLIB - oldobjs=$objlist - if test "X$oldobjs" = "X" ; then - eval cmds=\"\$concat_cmds\" - else - eval cmds=\"\$concat_cmds~\$old_archive_cmds\" - fi - fi - fi - func_execute_cmds "$cmds" 'exit $?' - done - - test -n "$generated" && \ - func_show_eval "${RM}r$generated" - - # Now create the libtool archive. - case $output in - *.la) - old_library= - test "$build_old_libs" = yes && old_library="$libname.$libext" - func_verbose "creating $output" - - # Preserve any variables that may affect compiler behavior - for var in $variables_saved_for_relink; do - if eval test -z \"\${$var+set}\"; then - relink_command="{ test -z \"\${$var+set}\" || $lt_unset $var || { $var=; export $var; }; }; $relink_command" - elif eval var_value=\$$var; test -z "$var_value"; then - relink_command="$var=; export $var; $relink_command" - else - func_quote_for_eval "$var_value" - relink_command="$var=$func_quote_for_eval_result; export $var; $relink_command" - fi - done - # Quote the link command for shipping. - relink_command="(cd `pwd`; $SHELL $progpath $preserve_args --mode=relink $libtool_args @inst_prefix_dir@)" - relink_command=`$ECHO "X$relink_command" | $Xsed -e "$sed_quote_subst"` - if test "$hardcode_automatic" = yes ; then - relink_command= - fi - - # Only create the output if not a dry run. - $opt_dry_run || { - for installed in no yes; do - if test "$installed" = yes; then - if test -z "$install_libdir"; then - break - fi - output="$output_objdir/$outputname"i - # Replace all uninstalled libtool libraries with the installed ones - newdependency_libs= - for deplib in $dependency_libs; do - case $deplib in - *.la) - func_basename "$deplib" - name="$func_basename_result" - eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $deplib` - test -z "$libdir" && \ - func_fatal_error "\`$deplib' is not a valid libtool archive" - newdependency_libs="$newdependency_libs $libdir/$name" - ;; - *) newdependency_libs="$newdependency_libs $deplib" ;; - esac - done - dependency_libs="$newdependency_libs" - newdlfiles= - - for lib in $dlfiles; do - case $lib in - *.la) - func_basename "$lib" - name="$func_basename_result" - eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $lib` - test -z "$libdir" && \ - func_fatal_error "\`$lib' is not a valid libtool archive" - newdlfiles="$newdlfiles $libdir/$name" - ;; - *) newdlfiles="$newdlfiles $lib" ;; - esac - done - dlfiles="$newdlfiles" - newdlprefiles= - for lib in $dlprefiles; do - case $lib in - *.la) - # Only pass preopened files to the pseudo-archive (for - # eventual linking with the app. that links it) if we - # didn't already link the preopened objects directly into - # the library: - func_basename "$lib" - name="$func_basename_result" - eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $lib` - test -z "$libdir" && \ - func_fatal_error "\`$lib' is not a valid libtool archive" - newdlprefiles="$newdlprefiles $libdir/$name" - ;; - esac - done - dlprefiles="$newdlprefiles" - else - newdlfiles= - for lib in $dlfiles; do - case $lib in - [\\/]* | [A-Za-z]:[\\/]*) abs="$lib" ;; - *) abs=`pwd`"/$lib" ;; - esac - newdlfiles="$newdlfiles $abs" - done - dlfiles="$newdlfiles" - newdlprefiles= - for lib in $dlprefiles; do - case $lib in - [\\/]* | [A-Za-z]:[\\/]*) abs="$lib" ;; - *) abs=`pwd`"/$lib" ;; - esac - newdlprefiles="$newdlprefiles $abs" - done - dlprefiles="$newdlprefiles" - fi - $RM $output - # place dlname in correct position for cygwin - tdlname=$dlname - case $host,$output,$installed,$module,$dlname in - *cygwin*,*lai,yes,no,*.dll | *mingw*,*lai,yes,no,*.dll | *cegcc*,*lai,yes,no,*.dll) tdlname=../bin/$dlname ;; - esac - $ECHO > $output "\ -# $outputname - a libtool library file -# Generated by $PROGRAM (GNU $PACKAGE$TIMESTAMP) $VERSION -# -# Please DO NOT delete this file! -# It is necessary for linking the library. - -# The name that we can dlopen(3). -dlname='$tdlname' - -# Names of this library. -library_names='$library_names' - -# The name of the static archive. -old_library='$old_library' - -# Linker flags that can not go in dependency_libs. -inherited_linker_flags='$new_inherited_linker_flags' - -# Libraries that this one depends upon. -dependency_libs='$dependency_libs' - -# Names of additional weak libraries provided by this library -weak_library_names='$weak_libs' - -# Version information for $libname. -current=$current -age=$age -revision=$revision - -# Is this an already installed library? -installed=$installed - -# Should we warn about portability when linking against -modules? -shouldnotlink=$module - -# Files to dlopen/dlpreopen -dlopen='$dlfiles' -dlpreopen='$dlprefiles' - -# Directory that this library needs to be installed in: -libdir='$install_libdir'" - if test "$installed" = no && test "$need_relink" = yes; then - $ECHO >> $output "\ -relink_command=\"$relink_command\"" - fi - done - } - - # Do a symbolic link so that the libtool archive can be found in - # LD_LIBRARY_PATH before the program is installed. - func_show_eval '( cd "$output_objdir" && $RM "$outputname" && $LN_S "../$outputname" "$outputname" )' 'exit $?' - ;; - esac - exit $EXIT_SUCCESS -} - -{ test "$mode" = link || test "$mode" = relink; } && - func_mode_link ${1+"$@"} - - -# func_mode_uninstall arg... -func_mode_uninstall () -{ - $opt_debug - RM="$nonopt" - files= - rmforce= - exit_status=0 - - # This variable tells wrapper scripts just to set variables rather - # than running their programs. - libtool_install_magic="$magic" - - for arg - do - case $arg in - -f) RM="$RM $arg"; rmforce=yes ;; - -*) RM="$RM $arg" ;; - *) files="$files $arg" ;; - esac - done - - test -z "$RM" && \ - func_fatal_help "you must specify an RM program" - - rmdirs= - - origobjdir="$objdir" - for file in $files; do - func_dirname "$file" "" "." - dir="$func_dirname_result" - if test "X$dir" = X.; then - objdir="$origobjdir" - else - objdir="$dir/$origobjdir" - fi - func_basename "$file" - name="$func_basename_result" - test "$mode" = uninstall && objdir="$dir" - - # Remember objdir for removal later, being careful to avoid duplicates - if test "$mode" = clean; then - case " $rmdirs " in - *" $objdir "*) ;; - *) rmdirs="$rmdirs $objdir" ;; - esac - fi - - # Don't error if the file doesn't exist and rm -f was used. - if { test -L "$file"; } >/dev/null 2>&1 || - { test -h "$file"; } >/dev/null 2>&1 || - test -f "$file"; then - : - elif test -d "$file"; then - exit_status=1 - continue - elif test "$rmforce" = yes; then - continue - fi - - rmfiles="$file" - - case $name in - *.la) - # Possibly a libtool archive, so verify it. - if func_lalib_p "$file"; then - func_source $dir/$name - - # Delete the libtool libraries and symlinks. - for n in $library_names; do - rmfiles="$rmfiles $objdir/$n" - done - test -n "$old_library" && rmfiles="$rmfiles $objdir/$old_library" - - case "$mode" in - clean) - case " $library_names " in - # " " in the beginning catches empty $dlname - *" $dlname "*) ;; - *) rmfiles="$rmfiles $objdir/$dlname" ;; - esac - test -n "$libdir" && rmfiles="$rmfiles $objdir/$name $objdir/${name}i" - ;; - uninstall) - if test -n "$library_names"; then - # Do each command in the postuninstall commands. - func_execute_cmds "$postuninstall_cmds" 'test "$rmforce" = yes || exit_status=1' - fi - - if test -n "$old_library"; then - # Do each command in the old_postuninstall commands. - func_execute_cmds "$old_postuninstall_cmds" 'test "$rmforce" = yes || exit_status=1' - fi - # FIXME: should reinstall the best remaining shared library. - ;; - esac - fi - ;; - - *.lo) - # Possibly a libtool object, so verify it. - if func_lalib_p "$file"; then - - # Read the .lo file - func_source $dir/$name - - # Add PIC object to the list of files to remove. - if test -n "$pic_object" && - test "$pic_object" != none; then - rmfiles="$rmfiles $dir/$pic_object" - fi - - # Add non-PIC object to the list of files to remove. - if test -n "$non_pic_object" && - test "$non_pic_object" != none; then - rmfiles="$rmfiles $dir/$non_pic_object" - fi - fi - ;; - - *) - if test "$mode" = clean ; then - noexename=$name - case $file in - *.exe) - func_stripname '' '.exe' "$file" - file=$func_stripname_result - func_stripname '' '.exe' "$name" - noexename=$func_stripname_result - # $file with .exe has already been added to rmfiles, - # add $file without .exe - rmfiles="$rmfiles $file" - ;; - esac - # Do a test to see if this is a libtool program. - if func_ltwrapper_p "$file"; then - if func_ltwrapper_executable_p "$file"; then - func_ltwrapper_scriptname "$file" - relink_command= - func_source $func_ltwrapper_scriptname_result - rmfiles="$rmfiles $func_ltwrapper_scriptname_result" - else - relink_command= - func_source $dir/$noexename - fi - - # note $name still contains .exe if it was in $file originally - # as does the version of $file that was added into $rmfiles - rmfiles="$rmfiles $objdir/$name $objdir/${name}S.${objext}" - if test "$fast_install" = yes && test -n "$relink_command"; then - rmfiles="$rmfiles $objdir/lt-$name" - fi - if test "X$noexename" != "X$name" ; then - rmfiles="$rmfiles $objdir/lt-${noexename}.c" - fi - fi - fi - ;; - esac - func_show_eval "$RM $rmfiles" 'exit_status=1' - done - objdir="$origobjdir" - - # Try to remove the ${objdir}s in the directories where we deleted files - for dir in $rmdirs; do - if test -d "$dir"; then - func_show_eval "rmdir $dir >/dev/null 2>&1" - fi - done - - exit $exit_status -} - -{ test "$mode" = uninstall || test "$mode" = clean; } && - func_mode_uninstall ${1+"$@"} - -test -z "$mode" && { - help="$generic_help" - func_fatal_help "you must specify a MODE" -} - -test -z "$exec_cmd" && \ - func_fatal_help "invalid operation mode \`$mode'" - -if test -n "$exec_cmd"; then - eval exec "$exec_cmd" - exit $EXIT_FAILURE -fi - -exit $exit_status - - -# The TAGs below are defined such that we never get into a situation -# in which we disable both kinds of libraries. Given conflicting -# choices, we go for a static library, that is the most portable, -# since we can't tell whether shared libraries were disabled because -# the user asked for that or because the platform doesn't support -# them. This is particularly important on AIX, because we don't -# support having both static and shared libraries enabled at the same -# time on that platform, so we default to a shared-only configuration. -# If a disable-shared tag is given, we'll fallback to a static-only -# configuration. But we'll never go from static-only to shared-only. - -# ### BEGIN LIBTOOL TAG CONFIG: disable-shared -build_libtool_libs=no -build_old_libs=yes -# ### END LIBTOOL TAG CONFIG: disable-shared - -# ### BEGIN LIBTOOL TAG CONFIG: disable-static -build_old_libs=`case $build_libtool_libs in yes) echo no;; *) echo yes;; esac` -# ### END LIBTOOL TAG CONFIG: disable-static - -# Local Variables: -# mode:shell-script -# sh-indentation:2 -# End: -# vi:sw=2 - diff --git a/pixman/missing b/pixman/missing deleted file mode 100644 index 28055d2ae..000000000 --- a/pixman/missing +++ /dev/null @@ -1,376 +0,0 @@ -#! /bin/sh -# Common stub for a few missing GNU programs while installing. - -scriptversion=2009-04-28.21; # UTC - -# Copyright (C) 1996, 1997, 1999, 2000, 2002, 2003, 2004, 2005, 2006, -# 2008, 2009 Free Software Foundation, Inc. -# Originally by Fran,cois Pinard <pinard@iro.umontreal.ca>, 1996. - -# This program is free software; you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation; either version 2, or (at your option) -# any later version. - -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. - -# You should have received a copy of the GNU General Public License -# along with this program. If not, see <http://www.gnu.org/licenses/>. - -# As a special exception to the GNU General Public License, if you -# distribute this file as part of a program that contains a -# configuration script generated by Autoconf, you may include it under -# the same distribution terms that you use for the rest of that program. - -if test $# -eq 0; then - echo 1>&2 "Try \`$0 --help' for more information" - exit 1 -fi - -run=: -sed_output='s/.* --output[ =]\([^ ]*\).*/\1/p' -sed_minuso='s/.* -o \([^ ]*\).*/\1/p' - -# In the cases where this matters, `missing' is being run in the -# srcdir already. -if test -f configure.ac; then - configure_ac=configure.ac -else - configure_ac=configure.in -fi - -msg="missing on your system" - -case $1 in ---run) - # Try to run requested program, and just exit if it succeeds. - run= - shift - "$@" && exit 0 - # Exit code 63 means version mismatch. This often happens - # when the user try to use an ancient version of a tool on - # a file that requires a minimum version. In this case we - # we should proceed has if the program had been absent, or - # if --run hadn't been passed. - if test $? = 63; then - run=: - msg="probably too old" - fi - ;; - - -h|--h|--he|--hel|--help) - echo "\ -$0 [OPTION]... PROGRAM [ARGUMENT]... - -Handle \`PROGRAM [ARGUMENT]...' for when PROGRAM is missing, or return an -error status if there is no known handling for PROGRAM. - -Options: - -h, --help display this help and exit - -v, --version output version information and exit - --run try to run the given command, and emulate it if it fails - -Supported PROGRAM values: - aclocal touch file \`aclocal.m4' - autoconf touch file \`configure' - autoheader touch file \`config.h.in' - autom4te touch the output file, or create a stub one - automake touch all \`Makefile.in' files - bison create \`y.tab.[ch]', if possible, from existing .[ch] - flex create \`lex.yy.c', if possible, from existing .c - help2man touch the output file - lex create \`lex.yy.c', if possible, from existing .c - makeinfo touch the output file - tar try tar, gnutar, gtar, then tar without non-portable flags - yacc create \`y.tab.[ch]', if possible, from existing .[ch] - -Version suffixes to PROGRAM as well as the prefixes \`gnu-', \`gnu', and -\`g' are ignored when checking the name. - -Send bug reports to <bug-automake@gnu.org>." - exit $? - ;; - - -v|--v|--ve|--ver|--vers|--versi|--versio|--version) - echo "missing $scriptversion (GNU Automake)" - exit $? - ;; - - -*) - echo 1>&2 "$0: Unknown \`$1' option" - echo 1>&2 "Try \`$0 --help' for more information" - exit 1 - ;; - -esac - -# normalize program name to check for. -program=`echo "$1" | sed ' - s/^gnu-//; t - s/^gnu//; t - s/^g//; t'` - -# Now exit if we have it, but it failed. Also exit now if we -# don't have it and --version was passed (most likely to detect -# the program). This is about non-GNU programs, so use $1 not -# $program. -case $1 in - lex*|yacc*) - # Not GNU programs, they don't have --version. - ;; - - tar*) - if test -n "$run"; then - echo 1>&2 "ERROR: \`tar' requires --run" - exit 1 - elif test "x$2" = "x--version" || test "x$2" = "x--help"; then - exit 1 - fi - ;; - - *) - if test -z "$run" && ($1 --version) > /dev/null 2>&1; then - # We have it, but it failed. - exit 1 - elif test "x$2" = "x--version" || test "x$2" = "x--help"; then - # Could not run --version or --help. This is probably someone - # running `$TOOL --version' or `$TOOL --help' to check whether - # $TOOL exists and not knowing $TOOL uses missing. - exit 1 - fi - ;; -esac - -# If it does not exist, or fails to run (possibly an outdated version), -# try to emulate it. -case $program in - aclocal*) - echo 1>&2 "\ -WARNING: \`$1' is $msg. You should only need it if - you modified \`acinclude.m4' or \`${configure_ac}'. You might want - to install the \`Automake' and \`Perl' packages. Grab them from - any GNU archive site." - touch aclocal.m4 - ;; - - autoconf*) - echo 1>&2 "\ -WARNING: \`$1' is $msg. You should only need it if - you modified \`${configure_ac}'. You might want to install the - \`Autoconf' and \`GNU m4' packages. Grab them from any GNU - archive site." - touch configure - ;; - - autoheader*) - echo 1>&2 "\ -WARNING: \`$1' is $msg. You should only need it if - you modified \`acconfig.h' or \`${configure_ac}'. You might want - to install the \`Autoconf' and \`GNU m4' packages. Grab them - from any GNU archive site." - files=`sed -n 's/^[ ]*A[CM]_CONFIG_HEADER(\([^)]*\)).*/\1/p' ${configure_ac}` - test -z "$files" && files="config.h" - touch_files= - for f in $files; do - case $f in - *:*) touch_files="$touch_files "`echo "$f" | - sed -e 's/^[^:]*://' -e 's/:.*//'`;; - *) touch_files="$touch_files $f.in";; - esac - done - touch $touch_files - ;; - - automake*) - echo 1>&2 "\ -WARNING: \`$1' is $msg. You should only need it if - you modified \`Makefile.am', \`acinclude.m4' or \`${configure_ac}'. - You might want to install the \`Automake' and \`Perl' packages. - Grab them from any GNU archive site." - find . -type f -name Makefile.am -print | - sed 's/\.am$/.in/' | - while read f; do touch "$f"; done - ;; - - autom4te*) - echo 1>&2 "\ -WARNING: \`$1' is needed, but is $msg. - You might have modified some files without having the - proper tools for further handling them. - You can get \`$1' as part of \`Autoconf' from any GNU - archive site." - - file=`echo "$*" | sed -n "$sed_output"` - test -z "$file" && file=`echo "$*" | sed -n "$sed_minuso"` - if test -f "$file"; then - touch $file - else - test -z "$file" || exec >$file - echo "#! /bin/sh" - echo "# Created by GNU Automake missing as a replacement of" - echo "# $ $@" - echo "exit 0" - chmod +x $file - exit 1 - fi - ;; - - bison*|yacc*) - echo 1>&2 "\ -WARNING: \`$1' $msg. You should only need it if - you modified a \`.y' file. You may need the \`Bison' package - in order for those modifications to take effect. You can get - \`Bison' from any GNU archive site." - rm -f y.tab.c y.tab.h - if test $# -ne 1; then - eval LASTARG="\${$#}" - case $LASTARG in - *.y) - SRCFILE=`echo "$LASTARG" | sed 's/y$/c/'` - if test -f "$SRCFILE"; then - cp "$SRCFILE" y.tab.c - fi - SRCFILE=`echo "$LASTARG" | sed 's/y$/h/'` - if test -f "$SRCFILE"; then - cp "$SRCFILE" y.tab.h - fi - ;; - esac - fi - if test ! -f y.tab.h; then - echo >y.tab.h - fi - if test ! -f y.tab.c; then - echo 'main() { return 0; }' >y.tab.c - fi - ;; - - lex*|flex*) - echo 1>&2 "\ -WARNING: \`$1' is $msg. You should only need it if - you modified a \`.l' file. You may need the \`Flex' package - in order for those modifications to take effect. You can get - \`Flex' from any GNU archive site." - rm -f lex.yy.c - if test $# -ne 1; then - eval LASTARG="\${$#}" - case $LASTARG in - *.l) - SRCFILE=`echo "$LASTARG" | sed 's/l$/c/'` - if test -f "$SRCFILE"; then - cp "$SRCFILE" lex.yy.c - fi - ;; - esac - fi - if test ! -f lex.yy.c; then - echo 'main() { return 0; }' >lex.yy.c - fi - ;; - - help2man*) - echo 1>&2 "\ -WARNING: \`$1' is $msg. You should only need it if - you modified a dependency of a manual page. You may need the - \`Help2man' package in order for those modifications to take - effect. You can get \`Help2man' from any GNU archive site." - - file=`echo "$*" | sed -n "$sed_output"` - test -z "$file" && file=`echo "$*" | sed -n "$sed_minuso"` - if test -f "$file"; then - touch $file - else - test -z "$file" || exec >$file - echo ".ab help2man is required to generate this page" - exit $? - fi - ;; - - makeinfo*) - echo 1>&2 "\ -WARNING: \`$1' is $msg. You should only need it if - you modified a \`.texi' or \`.texinfo' file, or any other file - indirectly affecting the aspect of the manual. The spurious - call might also be the consequence of using a buggy \`make' (AIX, - DU, IRIX). You might want to install the \`Texinfo' package or - the \`GNU make' package. Grab either from any GNU archive site." - # The file to touch is that specified with -o ... - file=`echo "$*" | sed -n "$sed_output"` - test -z "$file" && file=`echo "$*" | sed -n "$sed_minuso"` - if test -z "$file"; then - # ... or it is the one specified with @setfilename ... - infile=`echo "$*" | sed 's/.* \([^ ]*\) *$/\1/'` - file=`sed -n ' - /^@setfilename/{ - s/.* \([^ ]*\) *$/\1/ - p - q - }' $infile` - # ... or it is derived from the source name (dir/f.texi becomes f.info) - test -z "$file" && file=`echo "$infile" | sed 's,.*/,,;s,.[^.]*$,,'`.info - fi - # If the file does not exist, the user really needs makeinfo; - # let's fail without touching anything. - test -f $file || exit 1 - touch $file - ;; - - tar*) - shift - - # We have already tried tar in the generic part. - # Look for gnutar/gtar before invocation to avoid ugly error - # messages. - if (gnutar --version > /dev/null 2>&1); then - gnutar "$@" && exit 0 - fi - if (gtar --version > /dev/null 2>&1); then - gtar "$@" && exit 0 - fi - firstarg="$1" - if shift; then - case $firstarg in - *o*) - firstarg=`echo "$firstarg" | sed s/o//` - tar "$firstarg" "$@" && exit 0 - ;; - esac - case $firstarg in - *h*) - firstarg=`echo "$firstarg" | sed s/h//` - tar "$firstarg" "$@" && exit 0 - ;; - esac - fi - - echo 1>&2 "\ -WARNING: I can't seem to be able to run \`tar' with the given arguments. - You may want to install GNU tar or Free paxutils, or check the - command line arguments." - exit 1 - ;; - - *) - echo 1>&2 "\ -WARNING: \`$1' is needed, and is $msg. - You might have modified some files without having the - proper tools for further handling them. Check the \`README' file, - it often tells you about the needed prerequisites for installing - this package. You may also peek at any GNU archive site, in case - some other package would contain this missing \`$1' program." - exit 1 - ;; -esac - -exit 0 - -# Local variables: -# eval: (add-hook 'write-file-hooks 'time-stamp) -# time-stamp-start: "scriptversion=" -# time-stamp-format: "%:y-%02m-%02d.%02H" -# time-stamp-time-zone: "UTC" -# time-stamp-end: "; # UTC" -# End: diff --git a/pixman/pixman/Makefile.am b/pixman/pixman/Makefile.am index 66ad7f005..750556e79 100644 --- a/pixman/pixman/Makefile.am +++ b/pixman/pixman/Makefile.am @@ -1,126 +1,126 @@ -lib_LTLIBRARIES = libpixman-1.la -libpixman_1_la_LDFLAGS = -version-info $(LT_VERSION_INFO) -no-undefined @PTHREAD_LDFLAGS@ -libpixman_1_la_LIBADD = @DEP_LIBS@ -lm -libpixman_1_la_SOURCES = \ - pixman.h \ - pixman-accessor.h \ - pixman-access.c \ - pixman-access-accessors.c \ - pixman-cpu.c \ - pixman-gradient-walker.c \ - pixman-region16.c \ - pixman-region32.c \ - pixman-compiler.h \ - pixman-private.h \ - pixman-image.c \ - pixman-implementation.c \ - pixman-combine32.c \ - pixman-combine32.h \ - pixman-combine64.c \ - pixman-combine64.h \ - pixman-general.c \ - pixman.c \ - pixman-fast-path.c \ - pixman-solid-fill.c \ - pixman-conical-gradient.c \ - pixman-linear-gradient.c \ - pixman-radial-gradient.c \ - pixman-bits-image.c \ - pixman-utils.c \ - pixman-edge.c \ - pixman-edge-accessors.c \ - pixman-edge-imp.h \ - pixman-trap.c \ - pixman-timer.c \ - pixman-matrix.c - -libpixmanincludedir = $(includedir)/pixman-1/ -libpixmaninclude_HEADERS = pixman.h pixman-version.h -noinst_LTLIBRARIES = - -BUILT_SOURCES = pixman-combine32.h pixman-combine32.c pixman-combine64.h pixman-combine64.c - -pixman-combine32.c : pixman-combine.c.template pixman-combine32.h make-combine.pl - $(PERL) $(srcdir)/make-combine.pl 8 < $(srcdir)/pixman-combine.c.template > $@ || ($(RM) $@; exit 1) -pixman-combine32.h : pixman-combine.h.template make-combine.pl - $(PERL) $(srcdir)/make-combine.pl 8 < $(srcdir)/pixman-combine.h.template > $@ || ($(RM) $@; exit 1) - -pixman-combine64.c : pixman-combine.c.template pixman-combine64.h make-combine.pl - $(PERL) $(srcdir)/make-combine.pl 16 < $(srcdir)/pixman-combine.c.template > $@ || ($(RM) $@; exit 1) -pixman-combine64.h : pixman-combine.h.template make-combine.pl - $(PERL) $(srcdir)/make-combine.pl 16 < $(srcdir)/pixman-combine.h.template > $@ || ($(RM) $@; exit 1) - -EXTRA_DIST = Makefile.win32 pixman-combine.c.template make-combine.pl pixman-region.c \ - pixman-combine.h.template solaris-hwcap.mapfile pixman-x64-mmx-emulation.h -CLEANFILES = pixman-combine32.c pixman-combine64.c pixman-combine32.h pixman-combine64.h - -# mmx code -if USE_MMX -noinst_LTLIBRARIES += libpixman-mmx.la -libpixman_mmx_la_SOURCES = \ - pixman-mmx.c -libpixman_mmx_la_CFLAGS = $(DEP_CFLAGS) $(MMX_CFLAGS) -libpixman_mmx_la_LIBADD = $(DEP_LIBS) -libpixman_1_la_LDFLAGS += $(MMX_LDFLAGS) -libpixman_1_la_LIBADD += libpixman-mmx.la - -ASM_CFLAGS_mmx=$(MMX_CFLAGS) -endif - -# vmx code -if USE_VMX -noinst_LTLIBRARIES += libpixman-vmx.la -libpixman_vmx_la_SOURCES = \ - pixman-vmx.c \ - pixman-combine32.h -libpixman_vmx_la_CFLAGS = $(DEP_CFLAGS) $(VMX_CFLAGS) -libpixman_vmx_la_LIBADD = $(DEP_LIBS) -libpixman_1_la_LIBADD += libpixman-vmx.la - -ASM_CFLAGS_vmx=$(VMX_CFLAGS) -endif - -# sse2 code -if USE_SSE2 -noinst_LTLIBRARIES += libpixman-sse2.la -libpixman_sse2_la_SOURCES = \ - pixman-sse2.c -libpixman_sse2_la_CFLAGS = $(DEP_CFLAGS) $(SSE2_CFLAGS) -libpixman_sse2_la_LIBADD = $(DEP_LIBS) -libpixman_1_la_LDFLAGS += $(SSE2_LDFLAGS) -libpixman_1_la_LIBADD += libpixman-sse2.la - -ASM_CFLAGS_sse2=$(SSE2_CFLAGS) -endif - -# arm simd code -if USE_ARM_SIMD -noinst_LTLIBRARIES += libpixman-arm-simd.la -libpixman_arm_simd_la_SOURCES = \ - pixman-arm-simd.c \ - pixman-arm-common.h \ - pixman-arm-simd-asm.S -libpixman_arm_simd_la_CFLAGS = $(DEP_CFLAGS) -libpixman_arm_simd_la_LIBADD = $(DEP_LIBS) -libpixman_1_la_LIBADD += libpixman-arm-simd.la - -ASM_CFLAGS_arm_simd= -endif - -# arm neon code -if USE_ARM_NEON -noinst_LTLIBRARIES += libpixman-arm-neon.la -libpixman_arm_neon_la_SOURCES = \ - pixman-arm-neon.c \ - pixman-arm-common.h \ - pixman-arm-neon-asm.S \ - pixman-arm-neon-asm.h -libpixman_arm_neon_la_CFLAGS = $(DEP_CFLAGS) -libpixman_arm_neon_la_LIBADD = $(DEP_LIBS) -libpixman_1_la_LIBADD += libpixman-arm-neon.la - -ASM_CFLAGS_arm_neon= -endif - -.c.s : $(libpixmaninclude_HEADERS) $(BUILT_SOURCES) - $(CC) $(CFLAGS) $(ASM_CFLAGS_$(@:pixman-%.s=%)) $(ASM_CFLAGS_$(@:pixman-arm-%.s=arm_%)) -DHAVE_CONFIG_H -I$(srcdir) -I$(builddir) -I$(top_builddir) -S -o $@ $< +lib_LTLIBRARIES = libpixman-1.la
+libpixman_1_la_LDFLAGS = -version-info $(LT_VERSION_INFO) -no-undefined @PTHREAD_LDFLAGS@
+libpixman_1_la_LIBADD = @PTHREAD_LIBS@ @DEP_LIBS@ -lm
+libpixman_1_la_SOURCES = \
+ pixman.h \
+ pixman-accessor.h \
+ pixman-access.c \
+ pixman-access-accessors.c \
+ pixman-cpu.c \
+ pixman-gradient-walker.c \
+ pixman-region16.c \
+ pixman-region32.c \
+ pixman-compiler.h \
+ pixman-private.h \
+ pixman-image.c \
+ pixman-implementation.c \
+ pixman-combine32.c \
+ pixman-combine32.h \
+ pixman-combine64.c \
+ pixman-combine64.h \
+ pixman-general.c \
+ pixman.c \
+ pixman-fast-path.c \
+ pixman-solid-fill.c \
+ pixman-conical-gradient.c \
+ pixman-linear-gradient.c \
+ pixman-radial-gradient.c \
+ pixman-bits-image.c \
+ pixman-utils.c \
+ pixman-edge.c \
+ pixman-edge-accessors.c \
+ pixman-edge-imp.h \
+ pixman-trap.c \
+ pixman-timer.c \
+ pixman-matrix.c
+
+libpixmanincludedir = $(includedir)/pixman-1
+libpixmaninclude_HEADERS = pixman.h pixman-version.h
+noinst_LTLIBRARIES =
+
+BUILT_SOURCES = pixman-combine32.h pixman-combine32.c pixman-combine64.h pixman-combine64.c
+
+pixman-combine32.c : pixman-combine.c.template pixman-combine32.h make-combine.pl
+ $(PERL) $(srcdir)/make-combine.pl 8 < $(srcdir)/pixman-combine.c.template > $@ || ($(RM) $@; exit 1)
+pixman-combine32.h : pixman-combine.h.template make-combine.pl
+ $(PERL) $(srcdir)/make-combine.pl 8 < $(srcdir)/pixman-combine.h.template > $@ || ($(RM) $@; exit 1)
+
+pixman-combine64.c : pixman-combine.c.template pixman-combine64.h make-combine.pl
+ $(PERL) $(srcdir)/make-combine.pl 16 < $(srcdir)/pixman-combine.c.template > $@ || ($(RM) $@; exit 1)
+pixman-combine64.h : pixman-combine.h.template make-combine.pl
+ $(PERL) $(srcdir)/make-combine.pl 16 < $(srcdir)/pixman-combine.h.template > $@ || ($(RM) $@; exit 1)
+
+EXTRA_DIST = Makefile.win32 pixman-combine.c.template make-combine.pl pixman-region.c \
+ pixman-combine.h.template solaris-hwcap.mapfile pixman-x64-mmx-emulation.h
+CLEANFILES = pixman-combine32.c pixman-combine64.c pixman-combine32.h pixman-combine64.h
+
+# mmx code
+if USE_MMX
+noinst_LTLIBRARIES += libpixman-mmx.la
+libpixman_mmx_la_SOURCES = \
+ pixman-mmx.c
+libpixman_mmx_la_CFLAGS = $(DEP_CFLAGS) $(MMX_CFLAGS)
+libpixman_mmx_la_LIBADD = $(DEP_LIBS)
+libpixman_1_la_LDFLAGS += $(MMX_LDFLAGS)
+libpixman_1_la_LIBADD += libpixman-mmx.la
+
+ASM_CFLAGS_mmx=$(MMX_CFLAGS)
+endif
+
+# vmx code
+if USE_VMX
+noinst_LTLIBRARIES += libpixman-vmx.la
+libpixman_vmx_la_SOURCES = \
+ pixman-vmx.c \
+ pixman-combine32.h
+libpixman_vmx_la_CFLAGS = $(DEP_CFLAGS) $(VMX_CFLAGS)
+libpixman_vmx_la_LIBADD = $(DEP_LIBS)
+libpixman_1_la_LIBADD += libpixman-vmx.la
+
+ASM_CFLAGS_vmx=$(VMX_CFLAGS)
+endif
+
+# sse2 code
+if USE_SSE2
+noinst_LTLIBRARIES += libpixman-sse2.la
+libpixman_sse2_la_SOURCES = \
+ pixman-sse2.c
+libpixman_sse2_la_CFLAGS = $(DEP_CFLAGS) $(SSE2_CFLAGS)
+libpixman_sse2_la_LIBADD = $(DEP_LIBS)
+libpixman_1_la_LDFLAGS += $(SSE2_LDFLAGS)
+libpixman_1_la_LIBADD += libpixman-sse2.la
+
+ASM_CFLAGS_sse2=$(SSE2_CFLAGS)
+endif
+
+# arm simd code
+if USE_ARM_SIMD
+noinst_LTLIBRARIES += libpixman-arm-simd.la
+libpixman_arm_simd_la_SOURCES = \
+ pixman-arm-simd.c \
+ pixman-arm-common.h \
+ pixman-arm-simd-asm.S
+libpixman_arm_simd_la_CFLAGS = $(DEP_CFLAGS)
+libpixman_arm_simd_la_LIBADD = $(DEP_LIBS)
+libpixman_1_la_LIBADD += libpixman-arm-simd.la
+
+ASM_CFLAGS_arm_simd=
+endif
+
+# arm neon code
+if USE_ARM_NEON
+noinst_LTLIBRARIES += libpixman-arm-neon.la
+libpixman_arm_neon_la_SOURCES = \
+ pixman-arm-neon.c \
+ pixman-arm-common.h \
+ pixman-arm-neon-asm.S \
+ pixman-arm-neon-asm.h
+libpixman_arm_neon_la_CFLAGS = $(DEP_CFLAGS)
+libpixman_arm_neon_la_LIBADD = $(DEP_LIBS)
+libpixman_1_la_LIBADD += libpixman-arm-neon.la
+
+ASM_CFLAGS_arm_neon=
+endif
+
+.c.s : $(libpixmaninclude_HEADERS) $(BUILT_SOURCES)
+ $(CC) $(CFLAGS) $(ASM_CFLAGS_$(@:pixman-%.s=%)) $(ASM_CFLAGS_$(@:pixman-arm-%.s=arm_%)) -DHAVE_CONFIG_H -I$(srcdir) -I$(builddir) -I$(top_builddir) -S -o $@ $<
diff --git a/pixman/pixman/Makefile.in b/pixman/pixman/Makefile.in deleted file mode 100644 index 6519db85d..000000000 --- a/pixman/pixman/Makefile.in +++ /dev/null @@ -1,905 +0,0 @@ -# Makefile.in generated by automake 1.11.1 from Makefile.am. -# @configure_input@ - -# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, -# 2003, 2004, 2005, 2006, 2007, 2008, 2009 Free Software Foundation, -# Inc. -# This Makefile.in is free software; the Free Software Foundation -# gives unlimited permission to copy and/or distribute it, -# with or without modifications, as long as this notice is preserved. - -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY, to the extent permitted by law; without -# even the implied warranty of MERCHANTABILITY or FITNESS FOR A -# PARTICULAR PURPOSE. - -@SET_MAKE@ - - -VPATH = @srcdir@ -pkgdatadir = $(datadir)/@PACKAGE@ -pkgincludedir = $(includedir)/@PACKAGE@ -pkglibdir = $(libdir)/@PACKAGE@ -pkglibexecdir = $(libexecdir)/@PACKAGE@ -am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd -install_sh_DATA = $(install_sh) -c -m 644 -install_sh_PROGRAM = $(install_sh) -c -install_sh_SCRIPT = $(install_sh) -c -INSTALL_HEADER = $(INSTALL_DATA) -transform = $(program_transform_name) -NORMAL_INSTALL = : -PRE_INSTALL = : -POST_INSTALL = : -NORMAL_UNINSTALL = : -PRE_UNINSTALL = : -POST_UNINSTALL = : -build_triplet = @build@ -host_triplet = @host@ - -# mmx code -@USE_MMX_TRUE@am__append_1 = libpixman-mmx.la -@USE_MMX_TRUE@am__append_2 = $(MMX_LDFLAGS) -@USE_MMX_TRUE@am__append_3 = libpixman-mmx.la - -# vmx code -@USE_VMX_TRUE@am__append_4 = libpixman-vmx.la -@USE_VMX_TRUE@am__append_5 = libpixman-vmx.la - -# sse2 code -@USE_SSE2_TRUE@am__append_6 = libpixman-sse2.la -@USE_SSE2_TRUE@am__append_7 = $(SSE2_LDFLAGS) -@USE_SSE2_TRUE@am__append_8 = libpixman-sse2.la - -# arm simd code -@USE_ARM_SIMD_TRUE@am__append_9 = libpixman-arm-simd.la -@USE_ARM_SIMD_TRUE@am__append_10 = libpixman-arm-simd.la - -# arm neon code -@USE_ARM_NEON_TRUE@am__append_11 = libpixman-arm-neon.la -@USE_ARM_NEON_TRUE@am__append_12 = libpixman-arm-neon.la -subdir = pixman -DIST_COMMON = $(libpixmaninclude_HEADERS) $(srcdir)/Makefile.am \ - $(srcdir)/Makefile.in $(srcdir)/pixman-version.h.in -ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 -am__aclocal_m4_deps = $(top_srcdir)/configure.ac -am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ - $(ACLOCAL_M4) -mkinstalldirs = $(install_sh) -d -CONFIG_HEADER = $(top_builddir)/config.h -CONFIG_CLEAN_FILES = pixman-version.h -CONFIG_CLEAN_VPATH_FILES = -am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; -am__vpath_adj = case $$p in \ - $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \ - *) f=$$p;; \ - esac; -am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`; -am__install_max = 40 -am__nobase_strip_setup = \ - srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'` -am__nobase_strip = \ - for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||" -am__nobase_list = $(am__nobase_strip_setup); \ - for p in $$list; do echo "$$p $$p"; done | \ - sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \ - $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \ - if (++n[$$2] == $(am__install_max)) \ - { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \ - END { for (dir in files) print dir, files[dir] }' -am__base_list = \ - sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \ - sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g' -am__installdirs = "$(DESTDIR)$(libdir)" \ - "$(DESTDIR)$(libpixmanincludedir)" -LTLIBRARIES = $(lib_LTLIBRARIES) $(noinst_LTLIBRARIES) -libpixman_1_la_DEPENDENCIES = $(am__append_3) $(am__append_5) \ - $(am__append_8) $(am__append_10) $(am__append_12) -am_libpixman_1_la_OBJECTS = pixman-access.lo \ - pixman-access-accessors.lo pixman-cpu.lo \ - pixman-gradient-walker.lo pixman-region16.lo \ - pixman-region32.lo pixman-image.lo pixman-implementation.lo \ - pixman-combine32.lo pixman-combine64.lo pixman-general.lo \ - pixman.lo pixman-fast-path.lo pixman-solid-fill.lo \ - pixman-conical-gradient.lo pixman-linear-gradient.lo \ - pixman-radial-gradient.lo pixman-bits-image.lo pixman-utils.lo \ - pixman-edge.lo pixman-edge-accessors.lo pixman-trap.lo \ - pixman-timer.lo pixman-matrix.lo -libpixman_1_la_OBJECTS = $(am_libpixman_1_la_OBJECTS) -AM_V_lt = $(am__v_lt_$(V)) -am__v_lt_ = $(am__v_lt_$(AM_DEFAULT_VERBOSITY)) -am__v_lt_0 = --silent -libpixman_1_la_LINK = $(LIBTOOL) $(AM_V_lt) --tag=CC \ - $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=link $(CCLD) \ - $(AM_CFLAGS) $(CFLAGS) $(libpixman_1_la_LDFLAGS) $(LDFLAGS) -o \ - $@ -am__DEPENDENCIES_1 = -@USE_ARM_NEON_TRUE@libpixman_arm_neon_la_DEPENDENCIES = \ -@USE_ARM_NEON_TRUE@ $(am__DEPENDENCIES_1) -am__libpixman_arm_neon_la_SOURCES_DIST = pixman-arm-neon.c \ - pixman-arm-common.h pixman-arm-neon-asm.S \ - pixman-arm-neon-asm.h -@USE_ARM_NEON_TRUE@am_libpixman_arm_neon_la_OBJECTS = \ -@USE_ARM_NEON_TRUE@ libpixman_arm_neon_la-pixman-arm-neon.lo \ -@USE_ARM_NEON_TRUE@ pixman-arm-neon-asm.lo -libpixman_arm_neon_la_OBJECTS = $(am_libpixman_arm_neon_la_OBJECTS) -libpixman_arm_neon_la_LINK = $(LIBTOOL) $(AM_V_lt) --tag=CC \ - $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=link $(CCLD) \ - $(libpixman_arm_neon_la_CFLAGS) $(CFLAGS) $(AM_LDFLAGS) \ - $(LDFLAGS) -o $@ -@USE_ARM_NEON_TRUE@am_libpixman_arm_neon_la_rpath = -@USE_ARM_SIMD_TRUE@libpixman_arm_simd_la_DEPENDENCIES = \ -@USE_ARM_SIMD_TRUE@ $(am__DEPENDENCIES_1) -am__libpixman_arm_simd_la_SOURCES_DIST = pixman-arm-simd.c \ - pixman-arm-common.h pixman-arm-simd-asm.S -@USE_ARM_SIMD_TRUE@am_libpixman_arm_simd_la_OBJECTS = \ -@USE_ARM_SIMD_TRUE@ libpixman_arm_simd_la-pixman-arm-simd.lo \ -@USE_ARM_SIMD_TRUE@ pixman-arm-simd-asm.lo -libpixman_arm_simd_la_OBJECTS = $(am_libpixman_arm_simd_la_OBJECTS) -libpixman_arm_simd_la_LINK = $(LIBTOOL) $(AM_V_lt) --tag=CC \ - $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=link $(CCLD) \ - $(libpixman_arm_simd_la_CFLAGS) $(CFLAGS) $(AM_LDFLAGS) \ - $(LDFLAGS) -o $@ -@USE_ARM_SIMD_TRUE@am_libpixman_arm_simd_la_rpath = -@USE_MMX_TRUE@libpixman_mmx_la_DEPENDENCIES = $(am__DEPENDENCIES_1) -am__libpixman_mmx_la_SOURCES_DIST = pixman-mmx.c -@USE_MMX_TRUE@am_libpixman_mmx_la_OBJECTS = \ -@USE_MMX_TRUE@ libpixman_mmx_la-pixman-mmx.lo -libpixman_mmx_la_OBJECTS = $(am_libpixman_mmx_la_OBJECTS) -libpixman_mmx_la_LINK = $(LIBTOOL) $(AM_V_lt) --tag=CC \ - $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=link $(CCLD) \ - $(libpixman_mmx_la_CFLAGS) $(CFLAGS) $(AM_LDFLAGS) $(LDFLAGS) \ - -o $@ -@USE_MMX_TRUE@am_libpixman_mmx_la_rpath = -@USE_SSE2_TRUE@libpixman_sse2_la_DEPENDENCIES = $(am__DEPENDENCIES_1) -am__libpixman_sse2_la_SOURCES_DIST = pixman-sse2.c -@USE_SSE2_TRUE@am_libpixman_sse2_la_OBJECTS = \ -@USE_SSE2_TRUE@ libpixman_sse2_la-pixman-sse2.lo -libpixman_sse2_la_OBJECTS = $(am_libpixman_sse2_la_OBJECTS) -libpixman_sse2_la_LINK = $(LIBTOOL) $(AM_V_lt) --tag=CC \ - $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=link $(CCLD) \ - $(libpixman_sse2_la_CFLAGS) $(CFLAGS) $(AM_LDFLAGS) $(LDFLAGS) \ - -o $@ -@USE_SSE2_TRUE@am_libpixman_sse2_la_rpath = -@USE_VMX_TRUE@libpixman_vmx_la_DEPENDENCIES = $(am__DEPENDENCIES_1) -am__libpixman_vmx_la_SOURCES_DIST = pixman-vmx.c pixman-combine32.h -@USE_VMX_TRUE@am_libpixman_vmx_la_OBJECTS = \ -@USE_VMX_TRUE@ libpixman_vmx_la-pixman-vmx.lo -libpixman_vmx_la_OBJECTS = $(am_libpixman_vmx_la_OBJECTS) -libpixman_vmx_la_LINK = $(LIBTOOL) $(AM_V_lt) --tag=CC \ - $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=link $(CCLD) \ - $(libpixman_vmx_la_CFLAGS) $(CFLAGS) $(AM_LDFLAGS) $(LDFLAGS) \ - -o $@ -@USE_VMX_TRUE@am_libpixman_vmx_la_rpath = -DEFAULT_INCLUDES = -I.@am__isrc@ -I$(top_builddir) -depcomp = $(SHELL) $(top_srcdir)/depcomp -am__depfiles_maybe = depfiles -am__mv = mv -f -CPPASCOMPILE = $(CCAS) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) \ - $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CCASFLAGS) $(CCASFLAGS) -LTCPPASCOMPILE = $(LIBTOOL) $(AM_V_lt) $(AM_LIBTOOLFLAGS) \ - $(LIBTOOLFLAGS) --mode=compile $(CCAS) $(DEFS) \ - $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) \ - $(AM_CCASFLAGS) $(CCASFLAGS) -AM_V_CPPAS = $(am__v_CPPAS_$(V)) -am__v_CPPAS_ = $(am__v_CPPAS_$(AM_DEFAULT_VERBOSITY)) -am__v_CPPAS_0 = @echo " CPPAS " $@; -AM_V_at = $(am__v_at_$(V)) -am__v_at_ = $(am__v_at_$(AM_DEFAULT_VERBOSITY)) -am__v_at_0 = @ -COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \ - $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -LTCOMPILE = $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) \ - $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) \ - $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) \ - $(AM_CFLAGS) $(CFLAGS) -AM_V_CC = $(am__v_CC_$(V)) -am__v_CC_ = $(am__v_CC_$(AM_DEFAULT_VERBOSITY)) -am__v_CC_0 = @echo " CC " $@; -CCLD = $(CC) -LINK = $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) \ - $(LIBTOOLFLAGS) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \ - $(AM_LDFLAGS) $(LDFLAGS) -o $@ -AM_V_CCLD = $(am__v_CCLD_$(V)) -am__v_CCLD_ = $(am__v_CCLD_$(AM_DEFAULT_VERBOSITY)) -am__v_CCLD_0 = @echo " CCLD " $@; -AM_V_GEN = $(am__v_GEN_$(V)) -am__v_GEN_ = $(am__v_GEN_$(AM_DEFAULT_VERBOSITY)) -am__v_GEN_0 = @echo " GEN " $@; -SOURCES = $(libpixman_1_la_SOURCES) $(libpixman_arm_neon_la_SOURCES) \ - $(libpixman_arm_simd_la_SOURCES) $(libpixman_mmx_la_SOURCES) \ - $(libpixman_sse2_la_SOURCES) $(libpixman_vmx_la_SOURCES) -DIST_SOURCES = $(libpixman_1_la_SOURCES) \ - $(am__libpixman_arm_neon_la_SOURCES_DIST) \ - $(am__libpixman_arm_simd_la_SOURCES_DIST) \ - $(am__libpixman_mmx_la_SOURCES_DIST) \ - $(am__libpixman_sse2_la_SOURCES_DIST) \ - $(am__libpixman_vmx_la_SOURCES_DIST) -HEADERS = $(libpixmaninclude_HEADERS) -ETAGS = etags -CTAGS = ctags -DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) -ACLOCAL = @ACLOCAL@ -AMTAR = @AMTAR@ -AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@ -AR = @AR@ -AUTOCONF = @AUTOCONF@ -AUTOHEADER = @AUTOHEADER@ -AUTOMAKE = @AUTOMAKE@ -AWK = @AWK@ -CC = @CC@ -CCAS = @CCAS@ -CCASDEPMODE = @CCASDEPMODE@ -CCASFLAGS = @CCASFLAGS@ -CCDEPMODE = @CCDEPMODE@ -CFLAGS = @CFLAGS@ -CPP = @CPP@ -CPPFLAGS = @CPPFLAGS@ -CYGPATH_W = @CYGPATH_W@ -DEFS = @DEFS@ -DEPDIR = @DEPDIR@ -DEP_CFLAGS = @DEP_CFLAGS@ -DEP_LIBS = @DEP_LIBS@ -DSYMUTIL = @DSYMUTIL@ -DUMPBIN = @DUMPBIN@ -ECHO_C = @ECHO_C@ -ECHO_N = @ECHO_N@ -ECHO_T = @ECHO_T@ -EGREP = @EGREP@ -EXEEXT = @EXEEXT@ -FGREP = @FGREP@ -GREP = @GREP@ -GTK_CFLAGS = @GTK_CFLAGS@ -GTK_LIBS = @GTK_LIBS@ -HAVE_PTHREAD_SETSPECIFIC = @HAVE_PTHREAD_SETSPECIFIC@ -INSTALL = @INSTALL@ -INSTALL_DATA = @INSTALL_DATA@ -INSTALL_PROGRAM = @INSTALL_PROGRAM@ -INSTALL_SCRIPT = @INSTALL_SCRIPT@ -INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ -LD = @LD@ -LDFLAGS = @LDFLAGS@ -LIBOBJS = @LIBOBJS@ -LIBS = @LIBS@ -LIBTOOL = @LIBTOOL@ -LIPO = @LIPO@ -LN_S = @LN_S@ -LTLIBOBJS = @LTLIBOBJS@ -LT_VERSION_INFO = @LT_VERSION_INFO@ -MAKEINFO = @MAKEINFO@ -MKDIR_P = @MKDIR_P@ -MMX_CFLAGS = @MMX_CFLAGS@ -MMX_LDFLAGS = @MMX_LDFLAGS@ -NM = @NM@ -NMEDIT = @NMEDIT@ -OBJDUMP = @OBJDUMP@ -OBJEXT = @OBJEXT@ -OTOOL = @OTOOL@ -OTOOL64 = @OTOOL64@ -PACKAGE = @PACKAGE@ -PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ -PACKAGE_NAME = @PACKAGE_NAME@ -PACKAGE_STRING = @PACKAGE_STRING@ -PACKAGE_TARNAME = @PACKAGE_TARNAME@ -PACKAGE_URL = @PACKAGE_URL@ -PACKAGE_VERSION = @PACKAGE_VERSION@ -PATH_SEPARATOR = @PATH_SEPARATOR@ -PERL = @PERL@ -PIXMAN_TIMERS = @PIXMAN_TIMERS@ -PIXMAN_VERSION_MAJOR = @PIXMAN_VERSION_MAJOR@ -PIXMAN_VERSION_MICRO = @PIXMAN_VERSION_MICRO@ -PIXMAN_VERSION_MINOR = @PIXMAN_VERSION_MINOR@ -PKG_CONFIG = @PKG_CONFIG@ -PTHREAD_LDFLAGS = @PTHREAD_LDFLAGS@ -RANLIB = @RANLIB@ -SED = @SED@ -SET_MAKE = @SET_MAKE@ -SHELL = @SHELL@ -SSE2_CFLAGS = @SSE2_CFLAGS@ -SSE2_LDFLAGS = @SSE2_LDFLAGS@ -STRIP = @STRIP@ -TOOLCHAIN_SUPPORTS__THREAD = @TOOLCHAIN_SUPPORTS__THREAD@ -VERSION = @VERSION@ -VMX_CFLAGS = @VMX_CFLAGS@ -abs_builddir = @abs_builddir@ -abs_srcdir = @abs_srcdir@ -abs_top_builddir = @abs_top_builddir@ -abs_top_srcdir = @abs_top_srcdir@ -ac_ct_CC = @ac_ct_CC@ -ac_ct_DUMPBIN = @ac_ct_DUMPBIN@ -am__include = @am__include@ -am__leading_dot = @am__leading_dot@ -am__quote = @am__quote@ -am__tar = @am__tar@ -am__untar = @am__untar@ -bindir = @bindir@ -build = @build@ -build_alias = @build_alias@ -build_cpu = @build_cpu@ -build_os = @build_os@ -build_vendor = @build_vendor@ -builddir = @builddir@ -datadir = @datadir@ -datarootdir = @datarootdir@ -docdir = @docdir@ -dvidir = @dvidir@ -exec_prefix = @exec_prefix@ -host = @host@ -host_alias = @host_alias@ -host_cpu = @host_cpu@ -host_os = @host_os@ -host_vendor = @host_vendor@ -htmldir = @htmldir@ -includedir = @includedir@ -infodir = @infodir@ -install_sh = @install_sh@ -libdir = @libdir@ -libexecdir = @libexecdir@ -localedir = @localedir@ -localstatedir = @localstatedir@ -lt_ECHO = @lt_ECHO@ -mandir = @mandir@ -mkdir_p = @mkdir_p@ -oldincludedir = @oldincludedir@ -pdfdir = @pdfdir@ -prefix = @prefix@ -program_transform_name = @program_transform_name@ -psdir = @psdir@ -sbindir = @sbindir@ -sharedstatedir = @sharedstatedir@ -srcdir = @srcdir@ -sysconfdir = @sysconfdir@ -target_alias = @target_alias@ -top_build_prefix = @top_build_prefix@ -top_builddir = @top_builddir@ -top_srcdir = @top_srcdir@ -lib_LTLIBRARIES = libpixman-1.la -libpixman_1_la_LDFLAGS = -version-info $(LT_VERSION_INFO) \ - -no-undefined @PTHREAD_LDFLAGS@ $(am__append_2) \ - $(am__append_7) -libpixman_1_la_LIBADD = @DEP_LIBS@ -lm $(am__append_3) $(am__append_5) \ - $(am__append_8) $(am__append_10) $(am__append_12) -libpixman_1_la_SOURCES = \ - pixman.h \ - pixman-accessor.h \ - pixman-access.c \ - pixman-access-accessors.c \ - pixman-cpu.c \ - pixman-gradient-walker.c \ - pixman-region16.c \ - pixman-region32.c \ - pixman-compiler.h \ - pixman-private.h \ - pixman-image.c \ - pixman-implementation.c \ - pixman-combine32.c \ - pixman-combine32.h \ - pixman-combine64.c \ - pixman-combine64.h \ - pixman-general.c \ - pixman.c \ - pixman-fast-path.c \ - pixman-solid-fill.c \ - pixman-conical-gradient.c \ - pixman-linear-gradient.c \ - pixman-radial-gradient.c \ - pixman-bits-image.c \ - pixman-utils.c \ - pixman-edge.c \ - pixman-edge-accessors.c \ - pixman-edge-imp.h \ - pixman-trap.c \ - pixman-timer.c \ - pixman-matrix.c - -libpixmanincludedir = $(includedir)/pixman-1/ -libpixmaninclude_HEADERS = pixman.h pixman-version.h -noinst_LTLIBRARIES = $(am__append_1) $(am__append_4) $(am__append_6) \ - $(am__append_9) $(am__append_11) -BUILT_SOURCES = pixman-combine32.h pixman-combine32.c pixman-combine64.h pixman-combine64.c -EXTRA_DIST = Makefile.win32 pixman-combine.c.template make-combine.pl pixman-region.c \ - pixman-combine.h.template solaris-hwcap.mapfile pixman-x64-mmx-emulation.h - -CLEANFILES = pixman-combine32.c pixman-combine64.c pixman-combine32.h pixman-combine64.h -@USE_MMX_TRUE@libpixman_mmx_la_SOURCES = \ -@USE_MMX_TRUE@ pixman-mmx.c - -@USE_MMX_TRUE@libpixman_mmx_la_CFLAGS = $(DEP_CFLAGS) $(MMX_CFLAGS) -@USE_MMX_TRUE@libpixman_mmx_la_LIBADD = $(DEP_LIBS) -@USE_MMX_TRUE@ASM_CFLAGS_mmx = $(MMX_CFLAGS) -@USE_VMX_TRUE@libpixman_vmx_la_SOURCES = \ -@USE_VMX_TRUE@ pixman-vmx.c \ -@USE_VMX_TRUE@ pixman-combine32.h - -@USE_VMX_TRUE@libpixman_vmx_la_CFLAGS = $(DEP_CFLAGS) $(VMX_CFLAGS) -@USE_VMX_TRUE@libpixman_vmx_la_LIBADD = $(DEP_LIBS) -@USE_VMX_TRUE@ASM_CFLAGS_vmx = $(VMX_CFLAGS) -@USE_SSE2_TRUE@libpixman_sse2_la_SOURCES = \ -@USE_SSE2_TRUE@ pixman-sse2.c - -@USE_SSE2_TRUE@libpixman_sse2_la_CFLAGS = $(DEP_CFLAGS) $(SSE2_CFLAGS) -@USE_SSE2_TRUE@libpixman_sse2_la_LIBADD = $(DEP_LIBS) -@USE_SSE2_TRUE@ASM_CFLAGS_sse2 = $(SSE2_CFLAGS) -@USE_ARM_SIMD_TRUE@libpixman_arm_simd_la_SOURCES = \ -@USE_ARM_SIMD_TRUE@ pixman-arm-simd.c \ -@USE_ARM_SIMD_TRUE@ pixman-arm-common.h \ -@USE_ARM_SIMD_TRUE@ pixman-arm-simd-asm.S - -@USE_ARM_SIMD_TRUE@libpixman_arm_simd_la_CFLAGS = $(DEP_CFLAGS) -@USE_ARM_SIMD_TRUE@libpixman_arm_simd_la_LIBADD = $(DEP_LIBS) -@USE_ARM_SIMD_TRUE@ASM_CFLAGS_arm_simd = -@USE_ARM_NEON_TRUE@libpixman_arm_neon_la_SOURCES = \ -@USE_ARM_NEON_TRUE@ pixman-arm-neon.c \ -@USE_ARM_NEON_TRUE@ pixman-arm-common.h \ -@USE_ARM_NEON_TRUE@ pixman-arm-neon-asm.S \ -@USE_ARM_NEON_TRUE@ pixman-arm-neon-asm.h - -@USE_ARM_NEON_TRUE@libpixman_arm_neon_la_CFLAGS = $(DEP_CFLAGS) -@USE_ARM_NEON_TRUE@libpixman_arm_neon_la_LIBADD = $(DEP_LIBS) -@USE_ARM_NEON_TRUE@ASM_CFLAGS_arm_neon = -all: $(BUILT_SOURCES) - $(MAKE) $(AM_MAKEFLAGS) all-am - -.SUFFIXES: -.SUFFIXES: .S .c .lo .o .obj .s -$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps) - @for dep in $?; do \ - case '$(am__configure_deps)' in \ - *$$dep*) \ - ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \ - && { if test -f $@; then exit 0; else break; fi; }; \ - exit 1;; \ - esac; \ - done; \ - echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign pixman/Makefile'; \ - $(am__cd) $(top_srcdir) && \ - $(AUTOMAKE) --foreign pixman/Makefile -.PRECIOUS: Makefile -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status - @case '$?' in \ - *config.status*) \ - cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \ - *) \ - echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \ - cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \ - esac; - -$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) - cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh - -$(top_srcdir)/configure: $(am__configure_deps) - cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh -$(ACLOCAL_M4): $(am__aclocal_m4_deps) - cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh -$(am__aclocal_m4_deps): -pixman-version.h: $(top_builddir)/config.status $(srcdir)/pixman-version.h.in - cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ -install-libLTLIBRARIES: $(lib_LTLIBRARIES) - @$(NORMAL_INSTALL) - test -z "$(libdir)" || $(MKDIR_P) "$(DESTDIR)$(libdir)" - @list='$(lib_LTLIBRARIES)'; test -n "$(libdir)" || list=; \ - list2=; for p in $$list; do \ - if test -f $$p; then \ - list2="$$list2 $$p"; \ - else :; fi; \ - done; \ - test -z "$$list2" || { \ - echo " $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL) $(INSTALL_STRIP_FLAG) $$list2 '$(DESTDIR)$(libdir)'"; \ - $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL) $(INSTALL_STRIP_FLAG) $$list2 "$(DESTDIR)$(libdir)"; \ - } - -uninstall-libLTLIBRARIES: - @$(NORMAL_UNINSTALL) - @list='$(lib_LTLIBRARIES)'; test -n "$(libdir)" || list=; \ - for p in $$list; do \ - $(am__strip_dir) \ - echo " $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=uninstall rm -f '$(DESTDIR)$(libdir)/$$f'"; \ - $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=uninstall rm -f "$(DESTDIR)$(libdir)/$$f"; \ - done - -clean-libLTLIBRARIES: - -test -z "$(lib_LTLIBRARIES)" || rm -f $(lib_LTLIBRARIES) - @list='$(lib_LTLIBRARIES)'; for p in $$list; do \ - dir="`echo $$p | sed -e 's|/[^/]*$$||'`"; \ - test "$$dir" != "$$p" || dir=.; \ - echo "rm -f \"$${dir}/so_locations\""; \ - rm -f "$${dir}/so_locations"; \ - done - -clean-noinstLTLIBRARIES: - -test -z "$(noinst_LTLIBRARIES)" || rm -f $(noinst_LTLIBRARIES) - @list='$(noinst_LTLIBRARIES)'; for p in $$list; do \ - dir="`echo $$p | sed -e 's|/[^/]*$$||'`"; \ - test "$$dir" != "$$p" || dir=.; \ - echo "rm -f \"$${dir}/so_locations\""; \ - rm -f "$${dir}/so_locations"; \ - done -libpixman-1.la: $(libpixman_1_la_OBJECTS) $(libpixman_1_la_DEPENDENCIES) - $(AM_V_CCLD)$(libpixman_1_la_LINK) -rpath $(libdir) $(libpixman_1_la_OBJECTS) $(libpixman_1_la_LIBADD) $(LIBS) -libpixman-arm-neon.la: $(libpixman_arm_neon_la_OBJECTS) $(libpixman_arm_neon_la_DEPENDENCIES) - $(AM_V_CCLD)$(libpixman_arm_neon_la_LINK) $(am_libpixman_arm_neon_la_rpath) $(libpixman_arm_neon_la_OBJECTS) $(libpixman_arm_neon_la_LIBADD) $(LIBS) -libpixman-arm-simd.la: $(libpixman_arm_simd_la_OBJECTS) $(libpixman_arm_simd_la_DEPENDENCIES) - $(AM_V_CCLD)$(libpixman_arm_simd_la_LINK) $(am_libpixman_arm_simd_la_rpath) $(libpixman_arm_simd_la_OBJECTS) $(libpixman_arm_simd_la_LIBADD) $(LIBS) -libpixman-mmx.la: $(libpixman_mmx_la_OBJECTS) $(libpixman_mmx_la_DEPENDENCIES) - $(AM_V_CCLD)$(libpixman_mmx_la_LINK) $(am_libpixman_mmx_la_rpath) $(libpixman_mmx_la_OBJECTS) $(libpixman_mmx_la_LIBADD) $(LIBS) -libpixman-sse2.la: $(libpixman_sse2_la_OBJECTS) $(libpixman_sse2_la_DEPENDENCIES) - $(AM_V_CCLD)$(libpixman_sse2_la_LINK) $(am_libpixman_sse2_la_rpath) $(libpixman_sse2_la_OBJECTS) $(libpixman_sse2_la_LIBADD) $(LIBS) -libpixman-vmx.la: $(libpixman_vmx_la_OBJECTS) $(libpixman_vmx_la_DEPENDENCIES) - $(AM_V_CCLD)$(libpixman_vmx_la_LINK) $(am_libpixman_vmx_la_rpath) $(libpixman_vmx_la_OBJECTS) $(libpixman_vmx_la_LIBADD) $(LIBS) - -mostlyclean-compile: - -rm -f *.$(OBJEXT) - -distclean-compile: - -rm -f *.tab.c - -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/libpixman_arm_neon_la-pixman-arm-neon.Plo@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/libpixman_arm_simd_la-pixman-arm-simd.Plo@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/libpixman_mmx_la-pixman-mmx.Plo@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/libpixman_sse2_la-pixman-sse2.Plo@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/libpixman_vmx_la-pixman-vmx.Plo@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/pixman-access-accessors.Plo@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/pixman-access.Plo@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/pixman-arm-neon-asm.Plo@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/pixman-arm-simd-asm.Plo@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/pixman-bits-image.Plo@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/pixman-combine32.Plo@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/pixman-combine64.Plo@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/pixman-conical-gradient.Plo@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/pixman-cpu.Plo@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/pixman-edge-accessors.Plo@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/pixman-edge.Plo@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/pixman-fast-path.Plo@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/pixman-general.Plo@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/pixman-gradient-walker.Plo@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/pixman-image.Plo@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/pixman-implementation.Plo@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/pixman-linear-gradient.Plo@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/pixman-matrix.Plo@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/pixman-radial-gradient.Plo@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/pixman-region16.Plo@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/pixman-region32.Plo@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/pixman-solid-fill.Plo@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/pixman-timer.Plo@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/pixman-trap.Plo@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/pixman-utils.Plo@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/pixman.Plo@am__quote@ - -.S.o: -@am__fastdepCCAS_TRUE@ $(AM_V_CPPAS)$(CPPASCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $< -@am__fastdepCCAS_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po -@am__fastdepCCAS_FALSE@ $(AM_V_CPPAS) @AM_BACKSLASH@ -@AMDEP_TRUE@@am__fastdepCCAS_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCCAS_FALSE@ DEPDIR=$(DEPDIR) $(CCASDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCCAS_FALSE@ $(CPPASCOMPILE) -c -o $@ $< - -.S.obj: -@am__fastdepCCAS_TRUE@ $(AM_V_CPPAS)$(CPPASCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'` -@am__fastdepCCAS_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po -@am__fastdepCCAS_FALSE@ $(AM_V_CPPAS) @AM_BACKSLASH@ -@AMDEP_TRUE@@am__fastdepCCAS_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCCAS_FALSE@ DEPDIR=$(DEPDIR) $(CCASDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCCAS_FALSE@ $(CPPASCOMPILE) -c -o $@ `$(CYGPATH_W) '$<'` - -.S.lo: -@am__fastdepCCAS_TRUE@ $(AM_V_CPPAS)$(LTCPPASCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $< -@am__fastdepCCAS_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo -@am__fastdepCCAS_FALSE@ $(AM_V_CPPAS) @AM_BACKSLASH@ -@AMDEP_TRUE@@am__fastdepCCAS_FALSE@ source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCCAS_FALSE@ DEPDIR=$(DEPDIR) $(CCASDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCCAS_FALSE@ $(LTCPPASCOMPILE) -c -o $@ $< - -.c.o: -@am__fastdepCC_TRUE@ $(AM_V_CC)$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $< -@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po -@am__fastdepCC_FALSE@ $(AM_V_CC) @AM_BACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(COMPILE) -c $< - -.c.obj: -@am__fastdepCC_TRUE@ $(AM_V_CC)$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'` -@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po -@am__fastdepCC_FALSE@ $(AM_V_CC) @AM_BACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(COMPILE) -c `$(CYGPATH_W) '$<'` - -.c.lo: -@am__fastdepCC_TRUE@ $(AM_V_CC)$(LTCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $< -@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo -@am__fastdepCC_FALSE@ $(AM_V_CC) @AM_BACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(LTCOMPILE) -c -o $@ $< - -libpixman_arm_neon_la-pixman-arm-neon.lo: pixman-arm-neon.c -@am__fastdepCC_TRUE@ $(AM_V_CC)$(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libpixman_arm_neon_la_CFLAGS) $(CFLAGS) -MT libpixman_arm_neon_la-pixman-arm-neon.lo -MD -MP -MF $(DEPDIR)/libpixman_arm_neon_la-pixman-arm-neon.Tpo -c -o libpixman_arm_neon_la-pixman-arm-neon.lo `test -f 'pixman-arm-neon.c' || echo '$(srcdir)/'`pixman-arm-neon.c -@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/libpixman_arm_neon_la-pixman-arm-neon.Tpo $(DEPDIR)/libpixman_arm_neon_la-pixman-arm-neon.Plo -@am__fastdepCC_FALSE@ $(AM_V_CC) @AM_BACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='pixman-arm-neon.c' object='libpixman_arm_neon_la-pixman-arm-neon.lo' libtool=yes @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libpixman_arm_neon_la_CFLAGS) $(CFLAGS) -c -o libpixman_arm_neon_la-pixman-arm-neon.lo `test -f 'pixman-arm-neon.c' || echo '$(srcdir)/'`pixman-arm-neon.c - -libpixman_arm_simd_la-pixman-arm-simd.lo: pixman-arm-simd.c -@am__fastdepCC_TRUE@ $(AM_V_CC)$(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libpixman_arm_simd_la_CFLAGS) $(CFLAGS) -MT libpixman_arm_simd_la-pixman-arm-simd.lo -MD -MP -MF $(DEPDIR)/libpixman_arm_simd_la-pixman-arm-simd.Tpo -c -o libpixman_arm_simd_la-pixman-arm-simd.lo `test -f 'pixman-arm-simd.c' || echo '$(srcdir)/'`pixman-arm-simd.c -@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/libpixman_arm_simd_la-pixman-arm-simd.Tpo $(DEPDIR)/libpixman_arm_simd_la-pixman-arm-simd.Plo -@am__fastdepCC_FALSE@ $(AM_V_CC) @AM_BACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='pixman-arm-simd.c' object='libpixman_arm_simd_la-pixman-arm-simd.lo' libtool=yes @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libpixman_arm_simd_la_CFLAGS) $(CFLAGS) -c -o libpixman_arm_simd_la-pixman-arm-simd.lo `test -f 'pixman-arm-simd.c' || echo '$(srcdir)/'`pixman-arm-simd.c - -libpixman_mmx_la-pixman-mmx.lo: pixman-mmx.c -@am__fastdepCC_TRUE@ $(AM_V_CC)$(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libpixman_mmx_la_CFLAGS) $(CFLAGS) -MT libpixman_mmx_la-pixman-mmx.lo -MD -MP -MF $(DEPDIR)/libpixman_mmx_la-pixman-mmx.Tpo -c -o libpixman_mmx_la-pixman-mmx.lo `test -f 'pixman-mmx.c' || echo '$(srcdir)/'`pixman-mmx.c -@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/libpixman_mmx_la-pixman-mmx.Tpo $(DEPDIR)/libpixman_mmx_la-pixman-mmx.Plo -@am__fastdepCC_FALSE@ $(AM_V_CC) @AM_BACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='pixman-mmx.c' object='libpixman_mmx_la-pixman-mmx.lo' libtool=yes @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libpixman_mmx_la_CFLAGS) $(CFLAGS) -c -o libpixman_mmx_la-pixman-mmx.lo `test -f 'pixman-mmx.c' || echo '$(srcdir)/'`pixman-mmx.c - -libpixman_sse2_la-pixman-sse2.lo: pixman-sse2.c -@am__fastdepCC_TRUE@ $(AM_V_CC)$(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libpixman_sse2_la_CFLAGS) $(CFLAGS) -MT libpixman_sse2_la-pixman-sse2.lo -MD -MP -MF $(DEPDIR)/libpixman_sse2_la-pixman-sse2.Tpo -c -o libpixman_sse2_la-pixman-sse2.lo `test -f 'pixman-sse2.c' || echo '$(srcdir)/'`pixman-sse2.c -@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/libpixman_sse2_la-pixman-sse2.Tpo $(DEPDIR)/libpixman_sse2_la-pixman-sse2.Plo -@am__fastdepCC_FALSE@ $(AM_V_CC) @AM_BACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='pixman-sse2.c' object='libpixman_sse2_la-pixman-sse2.lo' libtool=yes @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libpixman_sse2_la_CFLAGS) $(CFLAGS) -c -o libpixman_sse2_la-pixman-sse2.lo `test -f 'pixman-sse2.c' || echo '$(srcdir)/'`pixman-sse2.c - -libpixman_vmx_la-pixman-vmx.lo: pixman-vmx.c -@am__fastdepCC_TRUE@ $(AM_V_CC)$(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libpixman_vmx_la_CFLAGS) $(CFLAGS) -MT libpixman_vmx_la-pixman-vmx.lo -MD -MP -MF $(DEPDIR)/libpixman_vmx_la-pixman-vmx.Tpo -c -o libpixman_vmx_la-pixman-vmx.lo `test -f 'pixman-vmx.c' || echo '$(srcdir)/'`pixman-vmx.c -@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/libpixman_vmx_la-pixman-vmx.Tpo $(DEPDIR)/libpixman_vmx_la-pixman-vmx.Plo -@am__fastdepCC_FALSE@ $(AM_V_CC) @AM_BACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='pixman-vmx.c' object='libpixman_vmx_la-pixman-vmx.lo' libtool=yes @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libpixman_vmx_la_CFLAGS) $(CFLAGS) -c -o libpixman_vmx_la-pixman-vmx.lo `test -f 'pixman-vmx.c' || echo '$(srcdir)/'`pixman-vmx.c - -mostlyclean-libtool: - -rm -f *.lo - -clean-libtool: - -rm -rf .libs _libs -install-libpixmanincludeHEADERS: $(libpixmaninclude_HEADERS) - @$(NORMAL_INSTALL) - test -z "$(libpixmanincludedir)" || $(MKDIR_P) "$(DESTDIR)$(libpixmanincludedir)" - @list='$(libpixmaninclude_HEADERS)'; test -n "$(libpixmanincludedir)" || list=; \ - for p in $$list; do \ - if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ - echo "$$d$$p"; \ - done | $(am__base_list) | \ - while read files; do \ - echo " $(INSTALL_HEADER) $$files '$(DESTDIR)$(libpixmanincludedir)'"; \ - $(INSTALL_HEADER) $$files "$(DESTDIR)$(libpixmanincludedir)" || exit $$?; \ - done - -uninstall-libpixmanincludeHEADERS: - @$(NORMAL_UNINSTALL) - @list='$(libpixmaninclude_HEADERS)'; test -n "$(libpixmanincludedir)" || list=; \ - files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \ - test -n "$$files" || exit 0; \ - echo " ( cd '$(DESTDIR)$(libpixmanincludedir)' && rm -f" $$files ")"; \ - cd "$(DESTDIR)$(libpixmanincludedir)" && rm -f $$files - -ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES) - list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ - unique=`for i in $$list; do \ - if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ - done | \ - $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ - END { if (nonempty) { for (i in files) print i; }; }'`; \ - mkid -fID $$unique -tags: TAGS - -TAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ - $(TAGS_FILES) $(LISP) - set x; \ - here=`pwd`; \ - list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ - unique=`for i in $$list; do \ - if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ - done | \ - $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ - END { if (nonempty) { for (i in files) print i; }; }'`; \ - shift; \ - if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \ - test -n "$$unique" || unique=$$empty_fix; \ - if test $$# -gt 0; then \ - $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ - "$$@" $$unique; \ - else \ - $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ - $$unique; \ - fi; \ - fi -ctags: CTAGS -CTAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ - $(TAGS_FILES) $(LISP) - list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ - unique=`for i in $$list; do \ - if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ - done | \ - $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ - END { if (nonempty) { for (i in files) print i; }; }'`; \ - test -z "$(CTAGS_ARGS)$$unique" \ - || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \ - $$unique - -GTAGS: - here=`$(am__cd) $(top_builddir) && pwd` \ - && $(am__cd) $(top_srcdir) \ - && gtags -i $(GTAGS_ARGS) "$$here" - -distclean-tags: - -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags - -distdir: $(DISTFILES) - @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ - topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ - list='$(DISTFILES)'; \ - dist_files=`for file in $$list; do echo $$file; done | \ - sed -e "s|^$$srcdirstrip/||;t" \ - -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ - case $$dist_files in \ - */*) $(MKDIR_P) `echo "$$dist_files" | \ - sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ - sort -u` ;; \ - esac; \ - for file in $$dist_files; do \ - if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ - if test -d $$d/$$file; then \ - dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ - if test -d "$(distdir)/$$file"; then \ - find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ - fi; \ - if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ - cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \ - find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ - fi; \ - cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \ - else \ - test -f "$(distdir)/$$file" \ - || cp -p $$d/$$file "$(distdir)/$$file" \ - || exit 1; \ - fi; \ - done -check-am: all-am -check: $(BUILT_SOURCES) - $(MAKE) $(AM_MAKEFLAGS) check-am -all-am: Makefile $(LTLIBRARIES) $(HEADERS) -installdirs: - for dir in "$(DESTDIR)$(libdir)" "$(DESTDIR)$(libpixmanincludedir)"; do \ - test -z "$$dir" || $(MKDIR_P) "$$dir"; \ - done -install: $(BUILT_SOURCES) - $(MAKE) $(AM_MAKEFLAGS) install-am -install-exec: install-exec-am -install-data: install-data-am -uninstall: uninstall-am - -install-am: all-am - @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am - -installcheck: installcheck-am -install-strip: - $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ - install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ - `test -z '$(STRIP)' || \ - echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install -mostlyclean-generic: - -clean-generic: - -test -z "$(CLEANFILES)" || rm -f $(CLEANFILES) - -distclean-generic: - -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) - -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES) - -maintainer-clean-generic: - @echo "This command is intended for maintainers to use" - @echo "it deletes files that may require special tools to rebuild." - -test -z "$(BUILT_SOURCES)" || rm -f $(BUILT_SOURCES) -clean: clean-am - -clean-am: clean-generic clean-libLTLIBRARIES clean-libtool \ - clean-noinstLTLIBRARIES mostlyclean-am - -distclean: distclean-am - -rm -rf ./$(DEPDIR) - -rm -f Makefile -distclean-am: clean-am distclean-compile distclean-generic \ - distclean-tags - -dvi: dvi-am - -dvi-am: - -html: html-am - -html-am: - -info: info-am - -info-am: - -install-data-am: install-libpixmanincludeHEADERS - -install-dvi: install-dvi-am - -install-dvi-am: - -install-exec-am: install-libLTLIBRARIES - -install-html: install-html-am - -install-html-am: - -install-info: install-info-am - -install-info-am: - -install-man: - -install-pdf: install-pdf-am - -install-pdf-am: - -install-ps: install-ps-am - -install-ps-am: - -installcheck-am: - -maintainer-clean: maintainer-clean-am - -rm -rf ./$(DEPDIR) - -rm -f Makefile -maintainer-clean-am: distclean-am maintainer-clean-generic - -mostlyclean: mostlyclean-am - -mostlyclean-am: mostlyclean-compile mostlyclean-generic \ - mostlyclean-libtool - -pdf: pdf-am - -pdf-am: - -ps: ps-am - -ps-am: - -uninstall-am: uninstall-libLTLIBRARIES \ - uninstall-libpixmanincludeHEADERS - -.MAKE: all check install install-am install-strip - -.PHONY: CTAGS GTAGS all all-am check check-am clean clean-generic \ - clean-libLTLIBRARIES clean-libtool clean-noinstLTLIBRARIES \ - ctags distclean distclean-compile distclean-generic \ - distclean-libtool distclean-tags distdir dvi dvi-am html \ - html-am info info-am install install-am install-data \ - install-data-am install-dvi install-dvi-am install-exec \ - install-exec-am install-html install-html-am install-info \ - install-info-am install-libLTLIBRARIES \ - install-libpixmanincludeHEADERS install-man install-pdf \ - install-pdf-am install-ps install-ps-am install-strip \ - installcheck installcheck-am installdirs maintainer-clean \ - maintainer-clean-generic mostlyclean mostlyclean-compile \ - mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \ - tags uninstall uninstall-am uninstall-libLTLIBRARIES \ - uninstall-libpixmanincludeHEADERS - - -pixman-combine32.c : pixman-combine.c.template pixman-combine32.h make-combine.pl - $(PERL) $(srcdir)/make-combine.pl 8 < $(srcdir)/pixman-combine.c.template > $@ || ($(RM) $@; exit 1) -pixman-combine32.h : pixman-combine.h.template make-combine.pl - $(PERL) $(srcdir)/make-combine.pl 8 < $(srcdir)/pixman-combine.h.template > $@ || ($(RM) $@; exit 1) - -pixman-combine64.c : pixman-combine.c.template pixman-combine64.h make-combine.pl - $(PERL) $(srcdir)/make-combine.pl 16 < $(srcdir)/pixman-combine.c.template > $@ || ($(RM) $@; exit 1) -pixman-combine64.h : pixman-combine.h.template make-combine.pl - $(PERL) $(srcdir)/make-combine.pl 16 < $(srcdir)/pixman-combine.h.template > $@ || ($(RM) $@; exit 1) - -.c.s : $(libpixmaninclude_HEADERS) $(BUILT_SOURCES) - $(CC) $(CFLAGS) $(ASM_CFLAGS_$(@:pixman-%.s=%)) $(ASM_CFLAGS_$(@:pixman-arm-%.s=arm_%)) -DHAVE_CONFIG_H -I$(srcdir) -I$(builddir) -I$(top_builddir) -S -o $@ $< - -# Tell versions [3.59,3.63) of GNU make to not export all variables. -# Otherwise a system limit (for SysV at least) may be exceeded. -.NOEXPORT: diff --git a/pixman/pixman/pixman-access.c b/pixman/pixman/pixman-access.c index fa0a2679f..33db7fd00 100644 --- a/pixman/pixman/pixman-access.c +++ b/pixman/pixman/pixman-access.c @@ -1,2902 +1,2989 @@ -/* - * - * Copyright © 2000 Keith Packard, member of The XFree86 Project, Inc. - * 2005 Lars Knoll & Zack Rusin, Trolltech - * 2008 Aaron Plattner, NVIDIA Corporation - * - * Permission to use, copy, modify, distribute, and sell this software and its - * documentation for any purpose is hereby granted without fee, provided that - * the above copyright notice appear in all copies and that both that - * copyright notice and this permission notice appear in supporting - * documentation, and that the name of Keith Packard not be used in - * advertising or publicity pertaining to distribution of the software without - * specific, written prior permission. Keith Packard makes no - * representations about the suitability of this software for any purpose. It - * is provided "as is" without express or implied warranty. - * - * THE COPYRIGHT HOLDERS DISCLAIM ALL WARRANTIES WITH REGARD TO THIS - * SOFTWARE, INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND - * FITNESS, IN NO EVENT SHALL THE COPYRIGHT HOLDERS BE LIABLE FOR ANY - * SPECIAL, INDIRECT OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES - * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN - * AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING - * OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS - * SOFTWARE. - */ - -#ifdef HAVE_CONFIG_H -#include <config.h> -#endif - -#include <stdlib.h> -#include <string.h> -#include <assert.h> - -#include "pixman-private.h" -#include "pixman-accessor.h" - -#define CONVERT_RGB24_TO_Y15(s) \ - (((((s) >> 16) & 0xff) * 153 + \ - (((s) >> 8) & 0xff) * 301 + \ - (((s) ) & 0xff) * 58) >> 2) - -#define CONVERT_RGB24_TO_RGB15(s) \ - ((((s) >> 3) & 0x001f) | \ - (((s) >> 6) & 0x03e0) | \ - (((s) >> 9) & 0x7c00)) - -#define RGB15_TO_ENTRY(mif,rgb15) \ - ((mif)->ent[rgb15]) - -#define RGB24_TO_ENTRY(mif,rgb24) \ - RGB15_TO_ENTRY (mif,CONVERT_RGB24_TO_RGB15 (rgb24)) - -#define RGB24_TO_ENTRY_Y(mif,rgb24) \ - ((mif)->ent[CONVERT_RGB24_TO_Y15 (rgb24)]) - -/* - * YV12 setup and access macros - */ - -#define YV12_SETUP(image) \ - bits_image_t *__bits_image = (bits_image_t *)image; \ - uint32_t *bits = __bits_image->bits; \ - int stride = __bits_image->rowstride; \ - int offset0 = stride < 0 ? \ - ((-stride) >> 1) * ((__bits_image->height - 1) >> 1) - stride : \ - stride * __bits_image->height; \ - int offset1 = stride < 0 ? \ - offset0 + ((-stride) >> 1) * ((__bits_image->height) >> 1) : \ - offset0 + (offset0 >> 2) - -/* Note no trailing semicolon on the above macro; if it's there, then - * the typical usage of YV12_SETUP(image); will have an extra trailing ; - * that some compilers will interpret as a statement -- and then any further - * variable declarations will cause an error. - */ - -#define YV12_Y(line) \ - ((uint8_t *) ((bits) + (stride) * (line))) - -#define YV12_U(line) \ - ((uint8_t *) ((bits) + offset1 + \ - ((stride) >> 1) * ((line) >> 1))) - -#define YV12_V(line) \ - ((uint8_t *) ((bits) + offset0 + \ - ((stride) >> 1) * ((line) >> 1))) - -/********************************** Fetch ************************************/ - -static void -fetch_scanline_a8r8g8b8 (pixman_image_t *image, - int x, - int y, - int width, - uint32_t * buffer, - const uint32_t *mask, - uint32_t mask_bits) -{ - const uint32_t *bits = image->bits.bits + y * image->bits.rowstride; - - MEMCPY_WRAPPED (image, - buffer, (const uint32_t *)bits + x, - width * sizeof(uint32_t)); -} - -static void -fetch_scanline_x8r8g8b8 (pixman_image_t *image, - int x, - int y, - int width, - uint32_t * buffer, - const uint32_t *mask, - uint32_t mask_bits) -{ - const uint32_t *bits = image->bits.bits + y * image->bits.rowstride; - const uint32_t *pixel = (const uint32_t *)bits + x; - const uint32_t *end = pixel + width; - - while (pixel < end) - *buffer++ = READ (image, pixel++) | 0xff000000; -} - -static void -fetch_scanline_a8b8g8r8 (pixman_image_t *image, - int x, - int y, - int width, - uint32_t * buffer, - const uint32_t *mask, - uint32_t mask_bits) -{ - const uint32_t *bits = image->bits.bits + y * image->bits.rowstride; - const uint32_t *pixel = (uint32_t *)bits + x; - const uint32_t *end = pixel + width; - - while (pixel < end) - { - uint32_t p = READ (image, pixel++); - - *buffer++ = (p & 0xff00ff00) | - ((p >> 16) & 0xff) | - ((p & 0xff) << 16); - } -} - -static void -fetch_scanline_x8b8g8r8 (pixman_image_t *image, - int x, - int y, - int width, - uint32_t * buffer, - const uint32_t *mask, - uint32_t mask_bits) -{ - const uint32_t *bits = image->bits.bits + y * image->bits.rowstride; - const uint32_t *pixel = (uint32_t *)bits + x; - const uint32_t *end = pixel + width; - - while (pixel < end) - { - uint32_t p = READ (image, pixel++); - - *buffer++ = 0xff000000 | - (p & 0x0000ff00) | - ((p >> 16) & 0xff) | - ((p & 0xff) << 16); - } -} - -static void -fetch_scanline_b8g8r8a8 (pixman_image_t *image, - int x, - int y, - int width, - uint32_t * buffer, - const uint32_t *mask, - uint32_t mask_bits) -{ - const uint32_t *bits = image->bits.bits + y * image->bits.rowstride; - const uint32_t *pixel = (uint32_t *)bits + x; - const uint32_t *end = pixel + width; - - while (pixel < end) - { - uint32_t p = READ (image, pixel++); - - *buffer++ = (((p & 0xff000000) >> 24) | - ((p & 0x00ff0000) >> 8) | - ((p & 0x0000ff00) << 8) | - ((p & 0x000000ff) << 24)); - } -} - -static void -fetch_scanline_b8g8r8x8 (pixman_image_t *image, - int x, - int y, - int width, - uint32_t * buffer, - const uint32_t *mask, - uint32_t mask_bits) -{ - const uint32_t *bits = image->bits.bits + y * image->bits.rowstride; - const uint32_t *pixel = (uint32_t *)bits + x; - const uint32_t *end = pixel + width; - - while (pixel < end) - { - uint32_t p = READ (image, pixel++); - - *buffer++ = (0xff000000 | - ((p & 0xff000000) >> 24) | - ((p & 0x00ff0000) >> 8) | - ((p & 0x0000ff00) << 8)); - } -} - -/* Expects a uint64_t buffer */ -static void -fetch_scanline_a2r10g10b10 (pixman_image_t *image, - int x, - int y, - int width, - uint32_t * b, - const uint32_t *mask, - uint32_t mask_bits) -{ - const uint32_t *bits = image->bits.bits + y * image->bits.rowstride; - const uint32_t *pixel = bits + x; - const uint32_t *end = pixel + width; - uint64_t *buffer = (uint64_t *)b; - - while (pixel < end) - { - uint32_t p = READ (image, pixel++); - uint64_t a = p >> 30; - uint64_t r = (p >> 20) & 0x3ff; - uint64_t g = (p >> 10) & 0x3ff; - uint64_t b = p & 0x3ff; - - r = r << 6 | r >> 4; - g = g << 6 | g >> 4; - b = b << 6 | b >> 4; - - a <<= 14; - a |= a >> 2; - a |= a >> 4; - a |= a >> 8; - - *buffer++ = a << 48 | r << 32 | g << 16 | b; - } -} - -/* Expects a uint64_t buffer */ -static void -fetch_scanline_x2r10g10b10 (pixman_image_t *image, - int x, - int y, - int width, - uint32_t * b, - const uint32_t *mask, - uint32_t mask_bits) -{ - const uint32_t *bits = image->bits.bits + y * image->bits.rowstride; - const uint32_t *pixel = (uint32_t *)bits + x; - const uint32_t *end = pixel + width; - uint64_t *buffer = (uint64_t *)b; - - while (pixel < end) - { - uint32_t p = READ (image, pixel++); - uint64_t r = (p >> 20) & 0x3ff; - uint64_t g = (p >> 10) & 0x3ff; - uint64_t b = p & 0x3ff; - - r = r << 6 | r >> 4; - g = g << 6 | g >> 4; - b = b << 6 | b >> 4; - - *buffer++ = 0xffffULL << 48 | r << 32 | g << 16 | b; - } -} - -/* Expects a uint64_t buffer */ -static void -fetch_scanline_a2b10g10r10 (pixman_image_t *image, - int x, - int y, - int width, - uint32_t * b, - const uint32_t *mask, - uint32_t mask_bits) -{ - const uint32_t *bits = image->bits.bits + y * image->bits.rowstride; - const uint32_t *pixel = bits + x; - const uint32_t *end = pixel + width; - uint64_t *buffer = (uint64_t *)b; - - while (pixel < end) - { - uint32_t p = READ (image, pixel++); - uint64_t a = p >> 30; - uint64_t b = (p >> 20) & 0x3ff; - uint64_t g = (p >> 10) & 0x3ff; - uint64_t r = p & 0x3ff; - - r = r << 6 | r >> 4; - g = g << 6 | g >> 4; - b = b << 6 | b >> 4; - - a <<= 14; - a |= a >> 2; - a |= a >> 4; - a |= a >> 8; - - *buffer++ = a << 48 | r << 32 | g << 16 | b; - } -} - -/* Expects a uint64_t buffer */ -static void -fetch_scanline_x2b10g10r10 (pixman_image_t *image, - int x, - int y, - int width, - uint32_t * b, - const uint32_t *mask, - uint32_t mask_bits) -{ - const uint32_t *bits = image->bits.bits + y * image->bits.rowstride; - const uint32_t *pixel = (uint32_t *)bits + x; - const uint32_t *end = pixel + width; - uint64_t *buffer = (uint64_t *)b; - - while (pixel < end) - { - uint32_t p = READ (image, pixel++); - uint64_t b = (p >> 20) & 0x3ff; - uint64_t g = (p >> 10) & 0x3ff; - uint64_t r = p & 0x3ff; - - r = r << 6 | r >> 4; - g = g << 6 | g >> 4; - b = b << 6 | b >> 4; - - *buffer++ = 0xffffULL << 48 | r << 32 | g << 16 | b; - } -} - -static void -fetch_scanline_r8g8b8 (pixman_image_t *image, - int x, - int y, - int width, - uint32_t * buffer, - const uint32_t *mask, - uint32_t mask_bits) -{ - const uint32_t *bits = image->bits.bits + y * image->bits.rowstride; - const uint8_t *pixel = (const uint8_t *)bits + 3 * x; - const uint8_t *end = pixel + 3 * width; - - while (pixel < end) - { - uint32_t b = 0xff000000; - -#ifdef WORDS_BIGENDIAN - b |= (READ (image, pixel++) << 16); - b |= (READ (image, pixel++) << 8); - b |= (READ (image, pixel++)); -#else - b |= (READ (image, pixel++)); - b |= (READ (image, pixel++) << 8); - b |= (READ (image, pixel++) << 16); -#endif - - *buffer++ = b; - } -} - -static void -fetch_scanline_b8g8r8 (pixman_image_t *image, - int x, - int y, - int width, - uint32_t * buffer, - const uint32_t *mask, - uint32_t mask_bits) -{ - const uint32_t *bits = image->bits.bits + y * image->bits.rowstride; - const uint8_t *pixel = (const uint8_t *)bits + 3 * x; - const uint8_t *end = pixel + 3 * width; - - while (pixel < end) - { - uint32_t b = 0xff000000; -#ifdef WORDS_BIGENDIAN - b |= (READ (image, pixel++)); - b |= (READ (image, pixel++) << 8); - b |= (READ (image, pixel++) << 16); -#else - b |= (READ (image, pixel++) << 16); - b |= (READ (image, pixel++) << 8); - b |= (READ (image, pixel++)); -#endif - *buffer++ = b; - } -} - -static void -fetch_scanline_r5g6b5 (pixman_image_t *image, - int x, - int y, - int width, - uint32_t * buffer, - const uint32_t *mask, - uint32_t mask_bits) -{ - const uint32_t *bits = image->bits.bits + y * image->bits.rowstride; - const uint16_t *pixel = (const uint16_t *)bits + x; - const uint16_t *end = pixel + width; - - while (pixel < end) - { - uint32_t p = READ (image, pixel++); - uint32_t r = (((p) << 3) & 0xf8) | - (((p) << 5) & 0xfc00) | - (((p) << 8) & 0xf80000); - - r |= (r >> 5) & 0x70007; - r |= (r >> 6) & 0x300; - - *buffer++ = 0xff000000 | r; - } -} - -static void -fetch_scanline_b5g6r5 (pixman_image_t *image, - int x, - int y, - int width, - uint32_t * buffer, - const uint32_t *mask, - uint32_t mask_bits) -{ - const uint32_t *bits = image->bits.bits + y * image->bits.rowstride; - const uint16_t *pixel = (const uint16_t *)bits + x; - const uint16_t *end = pixel + width; - - while (pixel < end) - { - uint32_t p = READ (image, pixel++); - uint32_t r, g, b; - - b = ((p & 0xf800) | ((p & 0xe000) >> 5)) >> 8; - g = ((p & 0x07e0) | ((p & 0x0600) >> 6)) << 5; - r = ((p & 0x001c) | ((p & 0x001f) << 5)) << 14; - - *buffer++ = 0xff000000 | r | g | b; - } -} - -static void -fetch_scanline_a1r5g5b5 (pixman_image_t *image, - int x, - int y, - int width, - uint32_t * buffer, - const uint32_t *mask, - uint32_t mask_bits) -{ - const uint32_t *bits = image->bits.bits + y * image->bits.rowstride; - const uint16_t *pixel = (const uint16_t *)bits + x; - const uint16_t *end = pixel + width; - - while (pixel < end) - { - uint32_t p = READ (image, pixel++); - uint32_t r, g, b, a; - - a = (uint32_t) ((uint8_t) (0 - ((p & 0x8000) >> 15))) << 24; - r = ((p & 0x7c00) | ((p & 0x7000) >> 5)) << 9; - g = ((p & 0x03e0) | ((p & 0x0380) >> 5)) << 6; - b = ((p & 0x001c) | ((p & 0x001f) << 5)) >> 2; - - *buffer++ = a | r | g | b; - } -} - -static void -fetch_scanline_x1r5g5b5 (pixman_image_t *image, - int x, - int y, - int width, - uint32_t * buffer, - const uint32_t *mask, - uint32_t mask_bits) -{ - const uint32_t *bits = image->bits.bits + y * image->bits.rowstride; - const uint16_t *pixel = (const uint16_t *)bits + x; - const uint16_t *end = pixel + width; - - while (pixel < end) - { - uint32_t p = READ (image, pixel++); - uint32_t r, g, b; - - r = ((p & 0x7c00) | ((p & 0x7000) >> 5)) << 9; - g = ((p & 0x03e0) | ((p & 0x0380) >> 5)) << 6; - b = ((p & 0x001c) | ((p & 0x001f) << 5)) >> 2; - - *buffer++ = 0xff000000 | r | g | b; - } -} - -static void -fetch_scanline_a1b5g5r5 (pixman_image_t *image, - int x, - int y, - int width, - uint32_t * buffer, - const uint32_t *mask, - uint32_t mask_bits) -{ - const uint32_t *bits = image->bits.bits + y * image->bits.rowstride; - const uint16_t *pixel = (const uint16_t *)bits + x; - const uint16_t *end = pixel + width; - uint32_t r, g, b, a; - - while (pixel < end) - { - uint32_t p = READ (image, pixel++); - - a = (uint32_t) ((uint8_t) (0 - ((p & 0x8000) >> 15))) << 24; - b = ((p & 0x7c00) | ((p & 0x7000) >> 5)) >> 7; - g = ((p & 0x03e0) | ((p & 0x0380) >> 5)) << 6; - r = ((p & 0x001c) | ((p & 0x001f) << 5)) << 14; - - *buffer++ = a | r | g | b; - } -} - -static void -fetch_scanline_x1b5g5r5 (pixman_image_t *image, - int x, - int y, - int width, - uint32_t * buffer, - const uint32_t *mask, - uint32_t mask_bits) -{ - const uint32_t *bits = image->bits.bits + y * image->bits.rowstride; - const uint16_t *pixel = (const uint16_t *)bits + x; - const uint16_t *end = pixel + width; - - while (pixel < end) - { - uint32_t p = READ (image, pixel++); - uint32_t r, g, b; - - b = ((p & 0x7c00) | ((p & 0x7000) >> 5)) >> 7; - g = ((p & 0x03e0) | ((p & 0x0380) >> 5)) << 6; - r = ((p & 0x001c) | ((p & 0x001f) << 5)) << 14; - - *buffer++ = 0xff000000 | r | g | b; - } -} - -static void -fetch_scanline_a4r4g4b4 (pixman_image_t *image, - int x, - int y, - int width, - uint32_t * buffer, - const uint32_t *mask, - uint32_t mask_bits) -{ - const uint32_t *bits = image->bits.bits + y * image->bits.rowstride; - const uint16_t *pixel = (const uint16_t *)bits + x; - const uint16_t *end = pixel + width; - - while (pixel < end) - { - uint32_t p = READ (image, pixel++); - uint32_t r, g, b, a; - - a = ((p & 0xf000) | ((p & 0xf000) >> 4)) << 16; - r = ((p & 0x0f00) | ((p & 0x0f00) >> 4)) << 12; - g = ((p & 0x00f0) | ((p & 0x00f0) >> 4)) << 8; - b = ((p & 0x000f) | ((p & 0x000f) << 4)); - - *buffer++ = a | r | g | b; - } -} - -static void -fetch_scanline_x4r4g4b4 (pixman_image_t *image, - int x, - int y, - int width, - uint32_t * buffer, - const uint32_t *mask, - uint32_t mask_bits) -{ - const uint32_t *bits = image->bits.bits + y * image->bits.rowstride; - const uint16_t *pixel = (const uint16_t *)bits + x; - const uint16_t *end = pixel + width; - - while (pixel < end) - { - uint32_t p = READ (image, pixel++); - uint32_t r, g, b; - - r = ((p & 0x0f00) | ((p & 0x0f00) >> 4)) << 12; - g = ((p & 0x00f0) | ((p & 0x00f0) >> 4)) << 8; - b = ((p & 0x000f) | ((p & 0x000f) << 4)); - - *buffer++ = 0xff000000 | r | g | b; - } -} - -static void -fetch_scanline_a4b4g4r4 (pixman_image_t *image, - int x, - int y, - int width, - uint32_t * buffer, - const uint32_t *mask, - uint32_t mask_bits) -{ - const uint32_t *bits = image->bits.bits + y * image->bits.rowstride; - const uint16_t *pixel = (const uint16_t *)bits + x; - const uint16_t *end = pixel + width; - - while (pixel < end) - { - uint32_t p = READ (image, pixel++); - uint32_t r, g, b, a; - - a = ((p & 0xf000) | ((p & 0xf000) >> 4)) << 16; - b = ((p & 0x0f00) | ((p & 0x0f00) >> 4)) >> 4; - g = ((p & 0x00f0) | ((p & 0x00f0) >> 4)) << 8; - r = ((p & 0x000f) | ((p & 0x000f) << 4)) << 16; - - *buffer++ = a | r | g | b; - } -} - -static void -fetch_scanline_x4b4g4r4 (pixman_image_t *image, - int x, - int y, - int width, - uint32_t * buffer, - const uint32_t *mask, - uint32_t mask_bits) -{ - const uint32_t *bits = image->bits.bits + y * image->bits.rowstride; - const uint16_t *pixel = (const uint16_t *)bits + x; - const uint16_t *end = pixel + width; - - while (pixel < end) - { - uint32_t p = READ (image, pixel++); - uint32_t r, g, b; - - b = ((p & 0x0f00) | ((p & 0x0f00) >> 4)) >> 4; - g = ((p & 0x00f0) | ((p & 0x00f0) >> 4)) << 8; - r = ((p & 0x000f) | ((p & 0x000f) << 4)) << 16; - - *buffer++ = 0xff000000 | r | g | b; - } -} - -static void -fetch_scanline_a8 (pixman_image_t *image, - int x, - int y, - int width, - uint32_t * buffer, - const uint32_t *mask, - uint32_t mask_bits) -{ - const uint32_t *bits = image->bits.bits + y * image->bits.rowstride; - const uint8_t *pixel = (const uint8_t *)bits + x; - const uint8_t *end = pixel + width; - - while (pixel < end) - *buffer++ = READ (image, pixel++) << 24; -} - -static void -fetch_scanline_r3g3b2 (pixman_image_t *image, - int x, - int y, - int width, - uint32_t * buffer, - const uint32_t *mask, - uint32_t mask_bits) -{ - const uint32_t *bits = image->bits.bits + y * image->bits.rowstride; - const uint8_t *pixel = (const uint8_t *)bits + x; - const uint8_t *end = pixel + width; - - while (pixel < end) - { - uint32_t p = READ (image, pixel++); - uint32_t r, g, b; - - r = ((p & 0xe0) | ((p & 0xe0) >> 3) | ((p & 0xc0) >> 6)) << 16; - g = ((p & 0x1c) | ((p & 0x18) >> 3) | ((p & 0x1c) << 3)) << 8; - b = (((p & 0x03) ) | - ((p & 0x03) << 2) | - ((p & 0x03) << 4) | - ((p & 0x03) << 6)); - - *buffer++ = 0xff000000 | r | g | b; - } -} - -static void -fetch_scanline_b2g3r3 (pixman_image_t *image, - int x, - int y, - int width, - uint32_t * buffer, - const uint32_t *mask, - uint32_t mask_bits) -{ - const uint32_t *bits = image->bits.bits + y * image->bits.rowstride; - const uint8_t *pixel = (const uint8_t *)bits + x; - const uint8_t *end = pixel + width; - - while (pixel < end) - { - uint32_t p = READ (image, pixel++); - uint32_t r, g, b; - - b = p & 0xc0; - b |= b >> 2; - b |= b >> 4; - b &= 0xff; - - g = (p & 0x38) << 10; - g |= g >> 3; - g |= g >> 6; - g &= 0xff00; - - r = (p & 0x7) << 21; - r |= r >> 3; - r |= r >> 6; - r &= 0xff0000; - - *buffer++ = 0xff000000 | r | g | b; - } -} - -static void -fetch_scanline_a2r2g2b2 (pixman_image_t *image, - int x, - int y, - int width, - uint32_t * buffer, - const uint32_t *mask, - uint32_t mask_bits) -{ - const uint32_t *bits = image->bits.bits + y * image->bits.rowstride; - const uint8_t *pixel = (const uint8_t *)bits + x; - const uint8_t *end = pixel + width; - - while (pixel < end) - { - uint32_t p = READ (image, pixel++); - uint32_t a, r, g, b; - - a = ((p & 0xc0) * 0x55) << 18; - r = ((p & 0x30) * 0x55) << 12; - g = ((p & 0x0c) * 0x55) << 6; - b = ((p & 0x03) * 0x55); - - *buffer++ = a | r | g | b; - } -} - -static void -fetch_scanline_a2b2g2r2 (pixman_image_t *image, - int x, - int y, - int width, - uint32_t * buffer, - const uint32_t *mask, - uint32_t mask_bits) -{ - const uint32_t *bits = image->bits.bits + y * image->bits.rowstride; - const uint8_t *pixel = (const uint8_t *)bits + x; - const uint8_t *end = pixel + width; - - while (pixel < end) - { - uint32_t p = READ (image, pixel++); - uint32_t a, r, g, b; - - a = ((p & 0xc0) * 0x55) << 18; - b = ((p & 0x30) * 0x55) >> 4; - g = ((p & 0x0c) * 0x55) << 6; - r = ((p & 0x03) * 0x55) << 16; - - *buffer++ = a | r | g | b; - } -} - -static void -fetch_scanline_c8 (pixman_image_t *image, - int x, - int y, - int width, - uint32_t * buffer, - const uint32_t *mask, - uint32_t mask_bits) -{ - const uint32_t *bits = image->bits.bits + y * image->bits.rowstride; - const pixman_indexed_t * indexed = image->bits.indexed; - const uint8_t *pixel = (const uint8_t *)bits + x; - const uint8_t *end = pixel + width; - - while (pixel < end) - { - uint32_t p = READ (image, pixel++); - - *buffer++ = indexed->rgba[p]; - } -} - -static void -fetch_scanline_x4a4 (pixman_image_t *image, - int x, - int y, - int width, - uint32_t * buffer, - const uint32_t *mask, - uint32_t mask_bits) -{ - const uint32_t *bits = image->bits.bits + y * image->bits.rowstride; - const uint8_t *pixel = (const uint8_t *)bits + x; - const uint8_t *end = pixel + width; - - while (pixel < end) - { - uint8_t p = READ (image, pixel++) & 0xf; - - *buffer++ = (p | (p << 4)) << 24; - } -} - -#define FETCH_8(img,l,o) (READ (img, (((uint8_t *)(l)) + ((o) >> 3)))) -#ifdef WORDS_BIGENDIAN -#define FETCH_4(img,l,o) \ - (((4 * (o)) & 4) ? (FETCH_8 (img,l, 4 * (o)) & 0xf) : (FETCH_8 (img,l,(4 * (o))) >> 4)) -#else -#define FETCH_4(img,l,o) \ - (((4 * (o)) & 4) ? (FETCH_8 (img, l, 4 * (o)) >> 4) : (FETCH_8 (img, l, (4 * (o))) & 0xf)) -#endif - -static void -fetch_scanline_a4 (pixman_image_t *image, - int x, - int y, - int width, - uint32_t * buffer, - const uint32_t *mask, - uint32_t mask_bits) -{ - const uint32_t *bits = image->bits.bits + y * image->bits.rowstride; - int i; - - for (i = 0; i < width; ++i) - { - uint32_t p = FETCH_4 (image, bits, i + x); - - p |= p << 4; - - *buffer++ = p << 24; - } -} - -static void -fetch_scanline_r1g2b1 (pixman_image_t *image, - int x, - int y, - int width, - uint32_t * buffer, - const uint32_t *mask, - uint32_t mask_bits) -{ - const uint32_t *bits = image->bits.bits + y * image->bits.rowstride; - int i; - - for (i = 0; i < width; ++i) - { - uint32_t p = FETCH_4 (image, bits, i + x); - uint32_t r, g, b; - - r = ((p & 0x8) * 0xff) << 13; - g = ((p & 0x6) * 0x55) << 7; - b = ((p & 0x1) * 0xff); - - *buffer++ = 0xff000000 | r | g | b; - } -} - -static void -fetch_scanline_b1g2r1 (pixman_image_t *image, - int x, - int y, - int width, - uint32_t * buffer, - const uint32_t *mask, - uint32_t mask_bits) -{ - const uint32_t *bits = image->bits.bits + y * image->bits.rowstride; - int i; - - for (i = 0; i < width; ++i) - { - uint32_t p = FETCH_4 (image, bits, i + x); - uint32_t r, g, b; - - b = ((p & 0x8) * 0xff) >> 3; - g = ((p & 0x6) * 0x55) << 7; - r = ((p & 0x1) * 0xff) << 16; - - *buffer++ = 0xff000000 | r | g | b; - } -} - -static void -fetch_scanline_a1r1g1b1 (pixman_image_t *image, - int x, - int y, - int width, - uint32_t * buffer, - const uint32_t *mask, - uint32_t mask_bits) -{ - uint32_t a, r, g, b; - const uint32_t *bits = image->bits.bits + y * image->bits.rowstride; - int i; - - for (i = 0; i < width; ++i) - { - uint32_t p = FETCH_4 (image, bits, i + x); - - a = ((p & 0x8) * 0xff) << 21; - r = ((p & 0x4) * 0xff) << 14; - g = ((p & 0x2) * 0xff) << 7; - b = ((p & 0x1) * 0xff); - - *buffer++ = a | r | g | b; - } -} - -static void -fetch_scanline_a1b1g1r1 (pixman_image_t *image, - int x, - int y, - int width, - uint32_t * buffer, - const uint32_t *mask, - uint32_t mask_bits) -{ - const uint32_t *bits = image->bits.bits + y * image->bits.rowstride; - int i; - - for (i = 0; i < width; ++i) - { - uint32_t p = FETCH_4 (image, bits, i + x); - uint32_t a, r, g, b; - - a = ((p & 0x8) * 0xff) << 21; - b = ((p & 0x4) * 0xff) >> 2; - g = ((p & 0x2) * 0xff) << 7; - r = ((p & 0x1) * 0xff) << 16; - - *buffer++ = a | r | g | b; - } -} - -static void -fetch_scanline_c4 (pixman_image_t *image, - int x, - int y, - int width, - uint32_t * buffer, - const uint32_t *mask, - uint32_t mask_bits) -{ - const uint32_t *bits = image->bits.bits + y * image->bits.rowstride; - const pixman_indexed_t * indexed = image->bits.indexed; - int i; - - for (i = 0; i < width; ++i) - { - uint32_t p = FETCH_4 (image, bits, i + x); - - *buffer++ = indexed->rgba[p]; - } -} - -static void -fetch_scanline_a1 (pixman_image_t *image, - int x, - int y, - int width, - uint32_t * buffer, - const uint32_t *mask, - uint32_t mask_bits) -{ - const uint32_t *bits = image->bits.bits + y * image->bits.rowstride; - int i; - - for (i = 0; i < width; ++i) - { - uint32_t p = READ (image, bits + ((i + x) >> 5)); - uint32_t a; - -#ifdef WORDS_BIGENDIAN - a = p >> (0x1f - ((i + x) & 0x1f)); -#else - a = p >> ((i + x) & 0x1f); -#endif - a = a & 1; - a |= a << 1; - a |= a << 2; - a |= a << 4; - - *buffer++ = a << 24; - } -} - -static void -fetch_scanline_g1 (pixman_image_t *image, - int x, - int y, - int width, - uint32_t * buffer, - const uint32_t *mask, - uint32_t mask_bits) -{ - const uint32_t *bits = image->bits.bits + y * image->bits.rowstride; - const pixman_indexed_t * indexed = image->bits.indexed; - int i; - - for (i = 0; i < width; ++i) - { - uint32_t p = READ (image, bits + ((i + x) >> 5)); - uint32_t a; - -#ifdef WORDS_BIGENDIAN - a = p >> (0x1f - ((i + x) & 0x1f)); -#else - a = p >> ((i + x) & 0x1f); -#endif - a = a & 1; - - *buffer++ = indexed->rgba[a]; - } -} - -static void -fetch_scanline_yuy2 (pixman_image_t *image, - int x, - int line, - int width, - uint32_t * buffer, - const uint32_t *mask, - uint32_t mask_bits) -{ - const uint32_t *bits = image->bits.bits + image->bits.rowstride * line; - int i; - - for (i = 0; i < width; i++) - { - int16_t y, u, v; - int32_t r, g, b; - - y = ((uint8_t *) bits)[(x + i) << 1] - 16; - u = ((uint8_t *) bits)[(((x + i) << 1) & - 4) + 1] - 128; - v = ((uint8_t *) bits)[(((x + i) << 1) & - 4) + 3] - 128; - - /* R = 1.164(Y - 16) + 1.596(V - 128) */ - r = 0x012b27 * y + 0x019a2e * v; - /* G = 1.164(Y - 16) - 0.813(V - 128) - 0.391(U - 128) */ - g = 0x012b27 * y - 0x00d0f2 * v - 0x00647e * u; - /* B = 1.164(Y - 16) + 2.018(U - 128) */ - b = 0x012b27 * y + 0x0206a2 * u; - - *buffer++ = 0xff000000 | - (r >= 0 ? r < 0x1000000 ? r & 0xff0000 : 0xff0000 : 0) | - (g >= 0 ? g < 0x1000000 ? (g >> 8) & 0x00ff00 : 0x00ff00 : 0) | - (b >= 0 ? b < 0x1000000 ? (b >> 16) & 0x0000ff : 0x0000ff : 0); - } -} - -static void -fetch_scanline_yv12 (pixman_image_t *image, - int x, - int line, - int width, - uint32_t * buffer, - const uint32_t *mask, - uint32_t mask_bits) -{ - YV12_SETUP (image); - uint8_t *y_line = YV12_Y (line); - uint8_t *u_line = YV12_U (line); - uint8_t *v_line = YV12_V (line); - int i; - - for (i = 0; i < width; i++) - { - int16_t y, u, v; - int32_t r, g, b; - - y = y_line[x + i] - 16; - u = u_line[(x + i) >> 1] - 128; - v = v_line[(x + i) >> 1] - 128; - - /* R = 1.164(Y - 16) + 1.596(V - 128) */ - r = 0x012b27 * y + 0x019a2e * v; - /* G = 1.164(Y - 16) - 0.813(V - 128) - 0.391(U - 128) */ - g = 0x012b27 * y - 0x00d0f2 * v - 0x00647e * u; - /* B = 1.164(Y - 16) + 2.018(U - 128) */ - b = 0x012b27 * y + 0x0206a2 * u; - - *buffer++ = 0xff000000 | - (r >= 0 ? r < 0x1000000 ? r & 0xff0000 : 0xff0000 : 0) | - (g >= 0 ? g < 0x1000000 ? (g >> 8) & 0x00ff00 : 0x00ff00 : 0) | - (b >= 0 ? b < 0x1000000 ? (b >> 16) & 0x0000ff : 0x0000ff : 0); - } -} - -/**************************** Pixel wise fetching *****************************/ - -/* Despite the type, expects a uint64_t buffer */ -static uint64_t -fetch_pixel_a2r10g10b10 (bits_image_t *image, - int offset, - int line) -{ - uint32_t *bits = image->bits + line * image->rowstride; - uint32_t p = READ (image, bits + offset); - uint64_t a = p >> 30; - uint64_t r = (p >> 20) & 0x3ff; - uint64_t g = (p >> 10) & 0x3ff; - uint64_t b = p & 0x3ff; - - r = r << 6 | r >> 4; - g = g << 6 | g >> 4; - b = b << 6 | b >> 4; - - a <<= 14; - a |= a >> 2; - a |= a >> 4; - a |= a >> 8; - - return a << 48 | r << 32 | g << 16 | b; -} - -/* Despite the type, this function expects a uint64_t buffer */ -static uint64_t -fetch_pixel_x2r10g10b10 (bits_image_t *image, - int offset, - int line) -{ - uint32_t *bits = image->bits + line * image->rowstride; - uint32_t p = READ (image, bits + offset); - uint64_t r = (p >> 20) & 0x3ff; - uint64_t g = (p >> 10) & 0x3ff; - uint64_t b = p & 0x3ff; - - r = r << 6 | r >> 4; - g = g << 6 | g >> 4; - b = b << 6 | b >> 4; - - return 0xffffULL << 48 | r << 32 | g << 16 | b; -} - -/* Despite the type, expects a uint64_t buffer */ -static uint64_t -fetch_pixel_a2b10g10r10 (bits_image_t *image, - int offset, - int line) -{ - uint32_t *bits = image->bits + line * image->rowstride; - uint32_t p = READ (image, bits + offset); - uint64_t a = p >> 30; - uint64_t b = (p >> 20) & 0x3ff; - uint64_t g = (p >> 10) & 0x3ff; - uint64_t r = p & 0x3ff; - - r = r << 6 | r >> 4; - g = g << 6 | g >> 4; - b = b << 6 | b >> 4; - - a <<= 14; - a |= a >> 2; - a |= a >> 4; - a |= a >> 8; - - return a << 48 | r << 32 | g << 16 | b; -} - -/* Despite the type, this function expects a uint64_t buffer */ -static uint64_t -fetch_pixel_x2b10g10r10 (bits_image_t *image, - int offset, - int line) -{ - uint32_t *bits = image->bits + line * image->rowstride; - uint32_t p = READ (image, bits + offset); - uint64_t b = (p >> 20) & 0x3ff; - uint64_t g = (p >> 10) & 0x3ff; - uint64_t r = p & 0x3ff; - - r = r << 6 | r >> 4; - g = g << 6 | g >> 4; - b = b << 6 | b >> 4; - - return 0xffffULL << 48 | r << 32 | g << 16 | b; -} - -static uint32_t -fetch_pixel_a8r8g8b8 (bits_image_t *image, - int offset, - int line) -{ - uint32_t *bits = image->bits + line * image->rowstride; - return READ (image, (uint32_t *)bits + offset); -} - -static uint32_t -fetch_pixel_x8r8g8b8 (bits_image_t *image, - int offset, - int line) -{ - uint32_t *bits = image->bits + line * image->rowstride; - - return READ (image, (uint32_t *)bits + offset) | 0xff000000; -} - -static uint32_t -fetch_pixel_a8b8g8r8 (bits_image_t *image, - int offset, - int line) -{ - uint32_t *bits = image->bits + line * image->rowstride; - uint32_t pixel = READ (image, (uint32_t *)bits + offset); - - return ((pixel & 0xff000000) | - ((pixel >> 16) & 0xff) | - (pixel & 0x0000ff00) | - ((pixel & 0xff) << 16)); -} - -static uint32_t -fetch_pixel_x8b8g8r8 (bits_image_t *image, - int offset, - int line) -{ - uint32_t *bits = image->bits + line * image->rowstride; - uint32_t pixel = READ (image, (uint32_t *)bits + offset); - - return ((0xff000000) | - ((pixel >> 16) & 0xff) | - (pixel & 0x0000ff00) | - ((pixel & 0xff) << 16)); -} - -static uint32_t -fetch_pixel_b8g8r8a8 (bits_image_t *image, - int offset, - int line) -{ - uint32_t *bits = image->bits + line * image->rowstride; - uint32_t pixel = READ (image, (uint32_t *)bits + offset); - - return ((pixel & 0xff000000) >> 24 | - (pixel & 0x00ff0000) >> 8 | - (pixel & 0x0000ff00) << 8 | - (pixel & 0x000000ff) << 24); -} - -static uint32_t -fetch_pixel_b8g8r8x8 (bits_image_t *image, - int offset, - int line) -{ - uint32_t *bits = image->bits + line * image->rowstride; - uint32_t pixel = READ (image, (uint32_t *)bits + offset); - - return ((0xff000000) | - (pixel & 0xff000000) >> 24 | - (pixel & 0x00ff0000) >> 8 | - (pixel & 0x0000ff00) << 8); -} - -static uint32_t -fetch_pixel_r8g8b8 (bits_image_t *image, - int offset, - int line) -{ - uint32_t *bits = image->bits + line * image->rowstride; - uint8_t *pixel = ((uint8_t *) bits) + (offset * 3); - -#ifdef WORDS_BIGENDIAN - return (0xff000000 | - (READ (image, pixel + 0) << 16) | - (READ (image, pixel + 1) << 8) | - (READ (image, pixel + 2))); -#else - return (0xff000000 | - (READ (image, pixel + 2) << 16) | - (READ (image, pixel + 1) << 8) | - (READ (image, pixel + 0))); -#endif -} - -static uint32_t -fetch_pixel_b8g8r8 (bits_image_t *image, - int offset, - int line) -{ - uint32_t *bits = image->bits + line * image->rowstride; - uint8_t *pixel = ((uint8_t *) bits) + (offset * 3); -#ifdef WORDS_BIGENDIAN - return (0xff000000 | - (READ (image, pixel + 2) << 16) | - (READ (image, pixel + 1) << 8) | - (READ (image, pixel + 0))); -#else - return (0xff000000 | - (READ (image, pixel + 0) << 16) | - (READ (image, pixel + 1) << 8) | - (READ (image, pixel + 2))); -#endif -} - -static uint32_t -fetch_pixel_r5g6b5 (bits_image_t *image, - int offset, - int line) -{ - uint32_t *bits = image->bits + line * image->rowstride; - uint32_t pixel = READ (image, (uint16_t *) bits + offset); - uint32_t r, g, b; - - r = ((pixel & 0xf800) | ((pixel & 0xe000) >> 5)) << 8; - g = ((pixel & 0x07e0) | ((pixel & 0x0600) >> 6)) << 5; - b = ((pixel & 0x001c) | ((pixel & 0x001f) << 5)) >> 2; - - return (0xff000000 | r | g | b); -} - -static uint32_t -fetch_pixel_b5g6r5 (bits_image_t *image, - int offset, - int line) -{ - uint32_t r, g, b; - uint32_t *bits = image->bits + line * image->rowstride; - uint32_t pixel = READ (image, (uint16_t *) bits + offset); - - b = ((pixel & 0xf800) | ((pixel & 0xe000) >> 5)) >> 8; - g = ((pixel & 0x07e0) | ((pixel & 0x0600) >> 6)) << 5; - r = ((pixel & 0x001c) | ((pixel & 0x001f) << 5)) << 14; - - return (0xff000000 | r | g | b); -} - -static uint32_t -fetch_pixel_a1r5g5b5 (bits_image_t *image, - int offset, - int line) -{ - uint32_t *bits = image->bits + line * image->rowstride; - uint32_t pixel = READ (image, (uint16_t *) bits + offset); - uint32_t a, r, g, b; - - a = (uint32_t) ((uint8_t) (0 - ((pixel & 0x8000) >> 15))) << 24; - r = ((pixel & 0x7c00) | ((pixel & 0x7000) >> 5)) << 9; - g = ((pixel & 0x03e0) | ((pixel & 0x0380) >> 5)) << 6; - b = ((pixel & 0x001c) | ((pixel & 0x001f) << 5)) >> 2; - - return (a | r | g | b); -} - -static uint32_t -fetch_pixel_x1r5g5b5 (bits_image_t *image, - int offset, - int line) -{ - uint32_t *bits = image->bits + line * image->rowstride; - uint32_t pixel = READ (image, (uint16_t *) bits + offset); - uint32_t r, g, b; - - r = ((pixel & 0x7c00) | ((pixel & 0x7000) >> 5)) << 9; - g = ((pixel & 0x03e0) | ((pixel & 0x0380) >> 5)) << 6; - b = ((pixel & 0x001c) | ((pixel & 0x001f) << 5)) >> 2; - - return (0xff000000 | r | g | b); -} - -static uint32_t -fetch_pixel_a1b5g5r5 (bits_image_t *image, - int offset, - int line) -{ - uint32_t *bits = image->bits + line * image->rowstride; - uint32_t pixel = READ (image, (uint16_t *) bits + offset); - uint32_t a, r, g, b; - - a = (uint32_t) ((uint8_t) (0 - ((pixel & 0x8000) >> 15))) << 24; - b = ((pixel & 0x7c00) | ((pixel & 0x7000) >> 5)) >> 7; - g = ((pixel & 0x03e0) | ((pixel & 0x0380) >> 5)) << 6; - r = ((pixel & 0x001c) | ((pixel & 0x001f) << 5)) << 14; - - return (a | r | g | b); -} - -static uint32_t -fetch_pixel_x1b5g5r5 (bits_image_t *image, - int offset, - int line) -{ - uint32_t *bits = image->bits + line * image->rowstride; - uint32_t pixel = READ (image, (uint16_t *) bits + offset); - uint32_t r, g, b; - - b = ((pixel & 0x7c00) | ((pixel & 0x7000) >> 5)) >> 7; - g = ((pixel & 0x03e0) | ((pixel & 0x0380) >> 5)) << 6; - r = ((pixel & 0x001c) | ((pixel & 0x001f) << 5)) << 14; - - return (0xff000000 | r | g | b); -} - -static uint32_t -fetch_pixel_a4r4g4b4 (bits_image_t *image, - int offset, - int line) -{ - uint32_t *bits = image->bits + line * image->rowstride; - uint32_t pixel = READ (image, (uint16_t *) bits + offset); - uint32_t a, r, g, b; - - a = ((pixel & 0xf000) | ((pixel & 0xf000) >> 4)) << 16; - r = ((pixel & 0x0f00) | ((pixel & 0x0f00) >> 4)) << 12; - g = ((pixel & 0x00f0) | ((pixel & 0x00f0) >> 4)) << 8; - b = ((pixel & 0x000f) | ((pixel & 0x000f) << 4)); - - return (a | r | g | b); -} - -static uint32_t -fetch_pixel_x4r4g4b4 (bits_image_t *image, - int offset, - int line) -{ - uint32_t *bits = image->bits + line * image->rowstride; - uint32_t pixel = READ (image, (uint16_t *) bits + offset); - uint32_t r, g, b; - - r = ((pixel & 0x0f00) | ((pixel & 0x0f00) >> 4)) << 12; - g = ((pixel & 0x00f0) | ((pixel & 0x00f0) >> 4)) << 8; - b = ((pixel & 0x000f) | ((pixel & 0x000f) << 4)); - - return (0xff000000 | r | g | b); -} - -static uint32_t -fetch_pixel_a4b4g4r4 (bits_image_t *image, - int offset, - int line) -{ - uint32_t *bits = image->bits + line * image->rowstride; - uint32_t pixel = READ (image, (uint16_t *) bits + offset); - uint32_t a, r, g, b; - - a = ((pixel & 0xf000) | ((pixel & 0xf000) >> 4)) << 16; - b = ((pixel & 0x0f00) | ((pixel & 0x0f00) >> 4)) >> 4; - g = ((pixel & 0x00f0) | ((pixel & 0x00f0) >> 4)) << 8; - r = ((pixel & 0x000f) | ((pixel & 0x000f) << 4)) << 16; - - return (a | r | g | b); -} - -static uint32_t -fetch_pixel_x4b4g4r4 (bits_image_t *image, - int offset, - int line) -{ - uint32_t *bits = image->bits + line * image->rowstride; - uint32_t pixel = READ (image, (uint16_t *) bits + offset); - uint32_t r, g, b; - - b = ((pixel & 0x0f00) | ((pixel & 0x0f00) >> 4)) >> 4; - g = ((pixel & 0x00f0) | ((pixel & 0x00f0) >> 4)) << 8; - r = ((pixel & 0x000f) | ((pixel & 0x000f) << 4)) << 16; - - return (0xff000000 | r | g | b); -} - -static uint32_t -fetch_pixel_a8 (bits_image_t *image, - int offset, - int line) -{ - uint32_t *bits = image->bits + line * image->rowstride; - uint32_t pixel = READ (image, (uint8_t *) bits + offset); - - return pixel << 24; -} - -static uint32_t -fetch_pixel_r3g3b2 (bits_image_t *image, - int offset, - int line) -{ - uint32_t *bits = image->bits + line * image->rowstride; - uint32_t pixel = READ (image, (uint8_t *) bits + offset); - uint32_t r, g, b; - - r = ((pixel & 0xe0) | - ((pixel & 0xe0) >> 3) | - ((pixel & 0xc0) >> 6)) << 16; - - g = ((pixel & 0x1c) | - ((pixel & 0x18) >> 3) | - ((pixel & 0x1c) << 3)) << 8; - - b = (((pixel & 0x03) ) | - ((pixel & 0x03) << 2) | - ((pixel & 0x03) << 4) | - ((pixel & 0x03) << 6)); - - return (0xff000000 | r | g | b); -} - -static uint32_t -fetch_pixel_b2g3r3 (bits_image_t *image, - int offset, - int line) -{ - uint32_t *bits = image->bits + line * image->rowstride; - uint32_t p = READ (image, (uint8_t *) bits + offset); - uint32_t r, g, b; - - b = p & 0xc0; - b |= b >> 2; - b |= b >> 4; - b &= 0xff; - - g = (p & 0x38) << 10; - g |= g >> 3; - g |= g >> 6; - g &= 0xff00; - - r = (p & 0x7) << 21; - r |= r >> 3; - r |= r >> 6; - r &= 0xff0000; - - return 0xff000000 | r | g | b; -} - -static uint32_t -fetch_pixel_a2r2g2b2 (bits_image_t *image, - int offset, - int line) -{ - uint32_t *bits = image->bits + line * image->rowstride; - uint32_t pixel = READ (image, (uint8_t *) bits + offset); - uint32_t a, r, g, b; - - a = ((pixel & 0xc0) * 0x55) << 18; - r = ((pixel & 0x30) * 0x55) << 12; - g = ((pixel & 0x0c) * 0x55) << 6; - b = ((pixel & 0x03) * 0x55); - - return a | r | g | b; -} - -static uint32_t -fetch_pixel_a2b2g2r2 (bits_image_t *image, - int offset, - int line) -{ - uint32_t *bits = image->bits + line * image->rowstride; - uint32_t pixel = READ (image, (uint8_t *) bits + offset); - uint32_t a, r, g, b; - - a = ((pixel & 0xc0) * 0x55) << 18; - b = ((pixel & 0x30) * 0x55) >> 4; - g = ((pixel & 0x0c) * 0x55) << 6; - r = ((pixel & 0x03) * 0x55) << 16; - - return a | r | g | b; -} - -static uint32_t -fetch_pixel_c8 (bits_image_t *image, - int offset, - int line) -{ - uint32_t *bits = image->bits + line * image->rowstride; - uint32_t pixel = READ (image, (uint8_t *) bits + offset); - const pixman_indexed_t * indexed = image->indexed; - - return indexed->rgba[pixel]; -} - -static uint32_t -fetch_pixel_x4a4 (bits_image_t *image, - int offset, - int line) -{ - uint32_t *bits = image->bits + line * image->rowstride; - uint32_t pixel = READ (image, (uint8_t *) bits + offset); - - return ((pixel & 0xf) | ((pixel & 0xf) << 4)) << 24; -} - -static uint32_t -fetch_pixel_a4 (bits_image_t *image, - int offset, - int line) -{ - uint32_t *bits = image->bits + line * image->rowstride; - uint32_t pixel = FETCH_4 (image, bits, offset); - - pixel |= pixel << 4; - return pixel << 24; -} - -static uint32_t -fetch_pixel_r1g2b1 (bits_image_t *image, - int offset, - int line) -{ - uint32_t *bits = image->bits + line * image->rowstride; - uint32_t pixel = FETCH_4 (image, bits, offset); - uint32_t r, g, b; - - r = ((pixel & 0x8) * 0xff) << 13; - g = ((pixel & 0x6) * 0x55) << 7; - b = ((pixel & 0x1) * 0xff); - - return 0xff000000 | r | g | b; -} - -static uint32_t -fetch_pixel_b1g2r1 (bits_image_t *image, - int offset, - int line) -{ - uint32_t *bits = image->bits + line * image->rowstride; - uint32_t pixel = FETCH_4 (image, bits, offset); - uint32_t r, g, b; - - b = ((pixel & 0x8) * 0xff) >> 3; - g = ((pixel & 0x6) * 0x55) << 7; - r = ((pixel & 0x1) * 0xff) << 16; - - return 0xff000000 | r | g | b; -} - -static uint32_t -fetch_pixel_a1r1g1b1 (bits_image_t *image, - int offset, - int line) -{ - uint32_t *bits = image->bits + line * image->rowstride; - uint32_t pixel = FETCH_4 (image, bits, offset); - uint32_t a, r, g, b; - - a = ((pixel & 0x8) * 0xff) << 21; - r = ((pixel & 0x4) * 0xff) << 14; - g = ((pixel & 0x2) * 0xff) << 7; - b = ((pixel & 0x1) * 0xff); - - return a | r | g | b; -} - -static uint32_t -fetch_pixel_a1b1g1r1 (bits_image_t *image, - int offset, - int line) -{ - uint32_t *bits = image->bits + line * image->rowstride; - uint32_t pixel = FETCH_4 (image, bits, offset); - uint32_t a, r, g, b; - - a = ((pixel & 0x8) * 0xff) << 21; - b = ((pixel & 0x4) * 0xff) >> 2; - g = ((pixel & 0x2) * 0xff) << 7; - r = ((pixel & 0x1) * 0xff) << 16; - - return a | r | g | b; -} - -static uint32_t -fetch_pixel_c4 (bits_image_t *image, - int offset, - int line) -{ - uint32_t *bits = image->bits + line * image->rowstride; - uint32_t pixel = FETCH_4 (image, bits, offset); - const pixman_indexed_t * indexed = image->indexed; - - return indexed->rgba[pixel]; -} - -static uint32_t -fetch_pixel_a1 (bits_image_t *image, - int offset, - int line) -{ - uint32_t *bits = image->bits + line * image->rowstride; - uint32_t pixel = READ (image, bits + (offset >> 5)); - uint32_t a; - -#ifdef WORDS_BIGENDIAN - a = pixel >> (0x1f - (offset & 0x1f)); -#else - a = pixel >> (offset & 0x1f); -#endif - a = a & 1; - a |= a << 1; - a |= a << 2; - a |= a << 4; - - return a << 24; -} - -static uint32_t -fetch_pixel_g1 (bits_image_t *image, - int offset, - int line) -{ - uint32_t *bits = image->bits + line * image->rowstride; - uint32_t pixel = READ (image, bits + (offset >> 5)); - const pixman_indexed_t * indexed = image->indexed; - uint32_t a; - -#ifdef WORDS_BIGENDIAN - a = pixel >> (0x1f - (offset & 0x1f)); -#else - a = pixel >> (offset & 0x1f); -#endif - a = a & 1; - - return indexed->rgba[a]; -} - -static uint32_t -fetch_pixel_yuy2 (bits_image_t *image, - int offset, - int line) -{ - const uint32_t *bits = image->bits + image->rowstride * line; - - int16_t y, u, v; - int32_t r, g, b; - - y = ((uint8_t *) bits)[offset << 1] - 16; - u = ((uint8_t *) bits)[((offset << 1) & - 4) + 1] - 128; - v = ((uint8_t *) bits)[((offset << 1) & - 4) + 3] - 128; - - /* R = 1.164(Y - 16) + 1.596(V - 128) */ - r = 0x012b27 * y + 0x019a2e * v; - - /* G = 1.164(Y - 16) - 0.813(V - 128) - 0.391(U - 128) */ - g = 0x012b27 * y - 0x00d0f2 * v - 0x00647e * u; - - /* B = 1.164(Y - 16) + 2.018(U - 128) */ - b = 0x012b27 * y + 0x0206a2 * u; - - return 0xff000000 | - (r >= 0 ? r < 0x1000000 ? r & 0xff0000 : 0xff0000 : 0) | - (g >= 0 ? g < 0x1000000 ? (g >> 8) & 0x00ff00 : 0x00ff00 : 0) | - (b >= 0 ? b < 0x1000000 ? (b >> 16) & 0x0000ff : 0x0000ff : 0); -} - -static uint32_t -fetch_pixel_yv12 (bits_image_t *image, - int offset, - int line) -{ - YV12_SETUP (image); - int16_t y = YV12_Y (line)[offset] - 16; - int16_t u = YV12_U (line)[offset >> 1] - 128; - int16_t v = YV12_V (line)[offset >> 1] - 128; - int32_t r, g, b; - - /* R = 1.164(Y - 16) + 1.596(V - 128) */ - r = 0x012b27 * y + 0x019a2e * v; - - /* G = 1.164(Y - 16) - 0.813(V - 128) - 0.391(U - 128) */ - g = 0x012b27 * y - 0x00d0f2 * v - 0x00647e * u; - - /* B = 1.164(Y - 16) + 2.018(U - 128) */ - b = 0x012b27 * y + 0x0206a2 * u; - - return 0xff000000 | - (r >= 0 ? r < 0x1000000 ? r & 0xff0000 : 0xff0000 : 0) | - (g >= 0 ? g < 0x1000000 ? (g >> 8) & 0x00ff00 : 0x00ff00 : 0) | - (b >= 0 ? b < 0x1000000 ? (b >> 16) & 0x0000ff : 0x0000ff : 0); -} - -/*********************************** Store ************************************/ - -#define SPLIT_A(v) \ - uint32_t a = ((v) >> 24), \ - r = ((v) >> 16) & 0xff, \ - g = ((v) >> 8) & 0xff, \ - b = (v) & 0xff - -#define SPLIT(v) \ - uint32_t r = ((v) >> 16) & 0xff, \ - g = ((v) >> 8) & 0xff, \ - b = (v) & 0xff - -static void -store_scanline_a2r10g10b10 (bits_image_t * image, - int x, - int y, - int width, - const uint32_t *v) -{ - uint32_t *bits = image->bits + image->rowstride * y; - uint32_t *pixel = bits + x; - uint64_t *values = (uint64_t *)v; - int i; - - for (i = 0; i < width; ++i) - { - WRITE (image, pixel++, - ((values[i] >> 32) & 0xc0000000) | - ((values[i] >> 18) & 0x3ff00000) | - ((values[i] >> 12) & 0xffc00) | - ((values[i] >> 6) & 0x3ff)); - } -} - -static void -store_scanline_x2r10g10b10 (bits_image_t * image, - int x, - int y, - int width, - const uint32_t *v) -{ - uint32_t *bits = image->bits + image->rowstride * y; - uint64_t *values = (uint64_t *)v; - uint32_t *pixel = bits + x; - int i; - - for (i = 0; i < width; ++i) - { - WRITE (image, pixel++, - ((values[i] >> 18) & 0x3ff00000) | - ((values[i] >> 12) & 0xffc00) | - ((values[i] >> 6) & 0x3ff)); - } -} - -static void -store_scanline_a2b10g10r10 (bits_image_t * image, - int x, - int y, - int width, - const uint32_t *v) -{ - uint32_t *bits = image->bits + image->rowstride * y; - uint32_t *pixel = bits + x; - uint64_t *values = (uint64_t *)v; - int i; - - for (i = 0; i < width; ++i) - { - WRITE (image, pixel++, - ((values[i] >> 32) & 0xc0000000) | - ((values[i] >> 38) & 0x3ff) | - ((values[i] >> 12) & 0xffc00) | - ((values[i] << 14) & 0x3ff00000)); - } -} - -static void -store_scanline_x2b10g10r10 (bits_image_t * image, - int x, - int y, - int width, - const uint32_t *v) -{ - uint32_t *bits = image->bits + image->rowstride * y; - uint64_t *values = (uint64_t *)v; - uint32_t *pixel = bits + x; - int i; - - for (i = 0; i < width; ++i) - { - WRITE (image, pixel++, - ((values[i] >> 38) & 0x3ff) | - ((values[i] >> 12) & 0xffc00) | - ((values[i] << 14) & 0x3ff00000)); - } -} - -static void -store_scanline_a8r8g8b8 (bits_image_t * image, - int x, - int y, - int width, - const uint32_t *values) -{ - uint32_t *bits = image->bits + image->rowstride * y; - - MEMCPY_WRAPPED (image, ((uint32_t *)bits) + x, values, - width * sizeof(uint32_t)); -} - -static void -store_scanline_x8r8g8b8 (bits_image_t * image, - int x, - int y, - int width, - const uint32_t *values) -{ - uint32_t *bits = image->bits + image->rowstride * y; - uint32_t *pixel = (uint32_t *)bits + x; - int i; - - for (i = 0; i < width; ++i) - WRITE (image, pixel++, values[i] & 0xffffff); -} - -static void -store_scanline_a8b8g8r8 (bits_image_t * image, - int x, - int y, - int width, - const uint32_t *values) -{ - uint32_t *bits = image->bits + image->rowstride * y; - uint32_t *pixel = (uint32_t *)bits + x; - int i; - - for (i = 0; i < width; ++i) - { - WRITE (image, pixel++, - (values[i] & 0xff00ff00) | - ((values[i] >> 16) & 0xff) | - ((values[i] & 0xff) << 16)); - } -} - -static void -store_scanline_x8b8g8r8 (bits_image_t * image, - int x, - int y, - int width, - const uint32_t *values) -{ - uint32_t *bits = image->bits + image->rowstride * y; - uint32_t *pixel = (uint32_t *)bits + x; - int i; - - for (i = 0; i < width; ++i) - { - WRITE (image, pixel++, - (values[i] & 0x0000ff00) | - ((values[i] >> 16) & 0xff) | - ((values[i] & 0xff) << 16)); - } -} - -static void -store_scanline_b8g8r8a8 (bits_image_t * image, - int x, - int y, - int width, - const uint32_t *values) -{ - uint32_t *bits = image->bits + image->rowstride * y; - uint32_t *pixel = (uint32_t *)bits + x; - int i; - - for (i = 0; i < width; ++i) - { - WRITE (image, pixel++, - ((values[i] >> 24) & 0x000000ff) | - ((values[i] >> 8) & 0x0000ff00) | - ((values[i] << 8) & 0x00ff0000) | - ((values[i] << 24) & 0xff000000)); - } -} - -static void -store_scanline_b8g8r8x8 (bits_image_t * image, - int x, - int y, - int width, - const uint32_t *values) -{ - uint32_t *bits = image->bits + image->rowstride * y; - uint32_t *pixel = (uint32_t *)bits + x; - int i; - - for (i = 0; i < width; ++i) - { - WRITE (image, pixel++, - ((values[i] >> 8) & 0x0000ff00) | - ((values[i] << 8) & 0x00ff0000) | - ((values[i] << 24) & 0xff000000)); - } -} - -static void -store_scanline_r8g8b8 (bits_image_t * image, - int x, - int y, - int width, - const uint32_t *values) -{ - uint32_t *bits = image->bits + image->rowstride * y; - uint8_t *pixel = ((uint8_t *) bits) + 3 * x; - int i; - - for (i = 0; i < width; ++i) - { - uint32_t val = values[i]; - -#ifdef WORDS_BIGENDIAN - WRITE (image, pixel++, (val & 0x00ff0000) >> 16); - WRITE (image, pixel++, (val & 0x0000ff00) >> 8); - WRITE (image, pixel++, (val & 0x000000ff) >> 0); -#else - WRITE (image, pixel++, (val & 0x000000ff) >> 0); - WRITE (image, pixel++, (val & 0x0000ff00) >> 8); - WRITE (image, pixel++, (val & 0x00ff0000) >> 16); -#endif - } -} - -static void -store_scanline_b8g8r8 (bits_image_t * image, - int x, - int y, - int width, - const uint32_t *values) -{ - uint32_t *bits = image->bits + image->rowstride * y; - uint8_t *pixel = ((uint8_t *) bits) + 3 * x; - int i; - - for (i = 0; i < width; ++i) - { - uint32_t val = values[i]; - -#ifdef WORDS_BIGENDIAN - WRITE (image, pixel++, (val & 0x000000ff) >> 0); - WRITE (image, pixel++, (val & 0x0000ff00) >> 8); - WRITE (image, pixel++, (val & 0x00ff0000) >> 16); -#else - WRITE (image, pixel++, (val & 0x00ff0000) >> 16); - WRITE (image, pixel++, (val & 0x0000ff00) >> 8); - WRITE (image, pixel++, (val & 0x000000ff) >> 0); -#endif - } -} - -static void -store_scanline_r5g6b5 (bits_image_t * image, - int x, - int y, - int width, - const uint32_t *values) -{ - uint32_t *bits = image->bits + image->rowstride * y; - uint16_t *pixel = ((uint16_t *) bits) + x; - int i; - - for (i = 0; i < width; ++i) - { - uint32_t s = values[i]; - - WRITE (image, pixel++, - ((s >> 3) & 0x001f) | - ((s >> 5) & 0x07e0) | - ((s >> 8) & 0xf800)); - } -} - -static void -store_scanline_b5g6r5 (bits_image_t * image, - int x, - int y, - int width, - const uint32_t *values) -{ - uint32_t *bits = image->bits + image->rowstride * y; - uint16_t *pixel = ((uint16_t *) bits) + x; - int i; - - for (i = 0; i < width; ++i) - { - SPLIT (values[i]); - - WRITE (image, pixel++, - ((b << 8) & 0xf800) | - ((g << 3) & 0x07e0) | - ((r >> 3) )); - } -} - -static void -store_scanline_a1r5g5b5 (bits_image_t * image, - int x, - int y, - int width, - const uint32_t *values) -{ - uint32_t *bits = image->bits + image->rowstride * y; - uint16_t *pixel = ((uint16_t *) bits) + x; - int i; - - for (i = 0; i < width; ++i) - { - SPLIT_A (values[i]); - - WRITE (image, pixel++, - ((a << 8) & 0x8000) | - ((r << 7) & 0x7c00) | - ((g << 2) & 0x03e0) | - ((b >> 3) )); - } -} - -static void -store_scanline_x1r5g5b5 (bits_image_t * image, - int x, - int y, - int width, - const uint32_t *values) -{ - uint32_t *bits = image->bits + image->rowstride * y; - uint16_t *pixel = ((uint16_t *) bits) + x; - int i; - - for (i = 0; i < width; ++i) - { - SPLIT (values[i]); - - WRITE (image, pixel++, - ((r << 7) & 0x7c00) | - ((g << 2) & 0x03e0) | - ((b >> 3) )); - } -} - -static void -store_scanline_a1b5g5r5 (bits_image_t * image, - int x, - int y, - int width, - const uint32_t *values) -{ - uint32_t *bits = image->bits + image->rowstride * y; - uint16_t *pixel = ((uint16_t *) bits) + x; - int i; - - for (i = 0; i < width; ++i) - { - SPLIT_A (values[i]); - - WRITE (image, pixel++, - ((a << 8) & 0x8000) | - ((b << 7) & 0x7c00) | - ((g << 2) & 0x03e0) | - ((r >> 3) )); - } -} - -static void -store_scanline_x1b5g5r5 (bits_image_t * image, - int x, - int y, - int width, - const uint32_t *values) -{ - uint32_t *bits = image->bits + image->rowstride * y; - uint16_t *pixel = ((uint16_t *) bits) + x; - int i; - - for (i = 0; i < width; ++i) - { - SPLIT (values[i]); - - WRITE (image, pixel++, ((b << 7) & 0x7c00) | - ((g << 2) & 0x03e0) | - ((r >> 3) )); - } -} - -static void -store_scanline_a4r4g4b4 (bits_image_t * image, - int x, - int y, - int width, - const uint32_t *values) -{ - uint32_t *bits = image->bits + image->rowstride * y; - uint16_t *pixel = ((uint16_t *) bits) + x; - int i; - - for (i = 0; i < width; ++i) - { - SPLIT_A (values[i]); - - WRITE (image, pixel++, - ((a << 8) & 0xf000) | - ((r << 4) & 0x0f00) | - ((g ) & 0x00f0) | - ((b >> 4) )); - } -} - -static void -store_scanline_x4r4g4b4 (bits_image_t * image, - int x, - int y, - int width, - const uint32_t *values) -{ - uint32_t *bits = image->bits + image->rowstride * y; - uint16_t *pixel = ((uint16_t *) bits) + x; - int i; - - for (i = 0; i < width; ++i) - { - SPLIT (values[i]); - - WRITE (image, pixel++, - ((r << 4) & 0x0f00) | - ((g ) & 0x00f0) | - ((b >> 4) )); - } -} - -static void -store_scanline_a4b4g4r4 (bits_image_t * image, - int x, - int y, - int width, - const uint32_t *values) -{ - uint32_t *bits = image->bits + image->rowstride * y; - uint16_t *pixel = ((uint16_t *) bits) + x; - int i; - - for (i = 0; i < width; ++i) - { - SPLIT_A (values[i]); - WRITE (image, pixel++, ((a << 8) & 0xf000) | - ((b << 4) & 0x0f00) | - ((g ) & 0x00f0) | - ((r >> 4) )); - } -} - -static void -store_scanline_x4b4g4r4 (bits_image_t * image, - int x, - int y, - int width, - const uint32_t *values) -{ - uint32_t *bits = image->bits + image->rowstride * y; - uint16_t *pixel = ((uint16_t *) bits) + x; - int i; - - for (i = 0; i < width; ++i) - { - SPLIT (values[i]); - - WRITE (image, pixel++, - ((b << 4) & 0x0f00) | - ((g ) & 0x00f0) | - ((r >> 4) )); - } -} - -static void -store_scanline_a8 (bits_image_t * image, - int x, - int y, - int width, - const uint32_t *values) -{ - uint32_t *bits = image->bits + image->rowstride * y; - uint8_t *pixel = ((uint8_t *) bits) + x; - int i; - - for (i = 0; i < width; ++i) - { - WRITE (image, pixel++, values[i] >> 24); - } -} - -static void -store_scanline_r3g3b2 (bits_image_t * image, - int x, - int y, - int width, - const uint32_t *values) -{ - uint32_t *bits = image->bits + image->rowstride * y; - uint8_t *pixel = ((uint8_t *) bits) + x; - int i; - - for (i = 0; i < width; ++i) - { - SPLIT (values[i]); - - WRITE (image, pixel++, - ((r ) & 0xe0) | - ((g >> 3) & 0x1c) | - ((b >> 6) )); - } -} - -static void -store_scanline_b2g3r3 (bits_image_t * image, - int x, - int y, - int width, - const uint32_t *values) -{ - uint32_t *bits = image->bits + image->rowstride * y; - uint8_t *pixel = ((uint8_t *) bits) + x; - int i; - - for (i = 0; i < width; ++i) - { - SPLIT (values[i]); - - WRITE (image, pixel++, - ((b ) & 0xc0) | - ((g >> 2) & 0x38) | - ((r >> 5) )); - } -} - -static void -store_scanline_a2r2g2b2 (bits_image_t * image, - int x, - int y, - int width, - const uint32_t *values) -{ - uint32_t *bits = image->bits + image->rowstride * y; - uint8_t *pixel = ((uint8_t *) bits) + x; - int i; - - for (i = 0; i < width; ++i) - { - SPLIT_A (values[i]); - - WRITE (image, pixel++, - ((a ) & 0xc0) | - ((r >> 2) & 0x30) | - ((g >> 4) & 0x0c) | - ((b >> 6) )); - } -} - -static void -store_scanline_a2b2g2r2 (bits_image_t * image, - int x, - int y, - int width, - const uint32_t *values) -{ - uint32_t *bits = image->bits + image->rowstride * y; - uint8_t *pixel = ((uint8_t *) bits) + x; - int i; - - for (i = 0; i < width; ++i) - { - SPLIT_A (values[i]); - - *(pixel++) = - ((a ) & 0xc0) | - ((b >> 2) & 0x30) | - ((g >> 4) & 0x0c) | - ((r >> 6) ); - } -} - -static void -store_scanline_c8 (bits_image_t * image, - int x, - int y, - int width, - const uint32_t *values) -{ - uint32_t *bits = image->bits + image->rowstride * y; - uint8_t *pixel = ((uint8_t *) bits) + x; - const pixman_indexed_t *indexed = image->indexed; - int i; - - for (i = 0; i < width; ++i) - WRITE (image, pixel++, RGB24_TO_ENTRY (indexed,values[i])); -} - -static void -store_scanline_x4a4 (bits_image_t * image, - int x, - int y, - int width, - const uint32_t *values) -{ - uint32_t *bits = image->bits + image->rowstride * y; - uint8_t *pixel = ((uint8_t *) bits) + x; - int i; - - for (i = 0; i < width; ++i) - WRITE (image, pixel++, values[i] >> 28); -} - -#define STORE_8(img,l,o,v) (WRITE (img, (uint8_t *)(l) + ((o) >> 3), (v))) -#ifdef WORDS_BIGENDIAN - -#define STORE_4(img,l,o,v) \ - do \ - { \ - int bo = 4 * (o); \ - int v4 = (v) & 0x0f; \ - \ - STORE_8 (img, l, bo, ( \ - bo & 4 ? \ - (FETCH_8 (img, l, bo) & 0xf0) | (v4) : \ - (FETCH_8 (img, l, bo) & 0x0f) | (v4 << 4))); \ - } while (0) -#else - -#define STORE_4(img,l,o,v) \ - do \ - { \ - int bo = 4 * (o); \ - int v4 = (v) & 0x0f; \ - \ - STORE_8 (img, l, bo, ( \ - bo & 4 ? \ - (FETCH_8 (img, l, bo) & 0x0f) | (v4 << 4) : \ - (FETCH_8 (img, l, bo) & 0xf0) | (v4))); \ - } while (0) -#endif - -static void -store_scanline_a4 (bits_image_t * image, - int x, - int y, - int width, - const uint32_t *values) -{ - uint32_t *bits = image->bits + image->rowstride * y; - int i; - - for (i = 0; i < width; ++i) - STORE_4 (image, bits, i + x, values[i] >> 28); -} - -static void -store_scanline_r1g2b1 (bits_image_t * image, - int x, - int y, - int width, - const uint32_t *values) -{ - uint32_t *bits = image->bits + image->rowstride * y; - int i; - - for (i = 0; i < width; ++i) - { - uint32_t pixel; - - SPLIT (values[i]); - pixel = (((r >> 4) & 0x8) | - ((g >> 5) & 0x6) | - ((b >> 7) )); - STORE_4 (image, bits, i + x, pixel); - } -} - -static void -store_scanline_b1g2r1 (bits_image_t * image, - int x, - int y, - int width, - const uint32_t *values) -{ - uint32_t *bits = image->bits + image->rowstride * y; - int i; - - for (i = 0; i < width; ++i) - { - uint32_t pixel; - - SPLIT (values[i]); - pixel = (((b >> 4) & 0x8) | - ((g >> 5) & 0x6) | - ((r >> 7) )); - STORE_4 (image, bits, i + x, pixel); - } -} - -static void -store_scanline_a1r1g1b1 (bits_image_t * image, - int x, - int y, - int width, - const uint32_t *values) -{ - uint32_t *bits = image->bits + image->rowstride * y; - int i; - - for (i = 0; i < width; ++i) - { - uint32_t pixel; - - SPLIT_A (values[i]); - pixel = (((a >> 4) & 0x8) | - ((r >> 5) & 0x4) | - ((g >> 6) & 0x2) | - ((b >> 7) )); - - STORE_4 (image, bits, i + x, pixel); - } -} - -static void -store_scanline_a1b1g1r1 (bits_image_t * image, - int x, - int y, - int width, - const uint32_t *values) -{ - uint32_t *bits = image->bits + image->rowstride * y; - int i; - - for (i = 0; i < width; ++i) - { - uint32_t pixel; - - SPLIT_A (values[i]); - pixel = (((a >> 4) & 0x8) | - ((b >> 5) & 0x4) | - ((g >> 6) & 0x2) | - ((r >> 7) )); - - STORE_4 (image, bits, i + x, pixel); - } -} - -static void -store_scanline_c4 (bits_image_t * image, - int x, - int y, - int width, - const uint32_t *values) -{ - uint32_t *bits = image->bits + image->rowstride * y; - const pixman_indexed_t *indexed = image->indexed; - int i; - - for (i = 0; i < width; ++i) - { - uint32_t pixel; - - pixel = RGB24_TO_ENTRY (indexed, values[i]); - STORE_4 (image, bits, i + x, pixel); - } -} - -static void -store_scanline_a1 (bits_image_t * image, - int x, - int y, - int width, - const uint32_t *values) -{ - uint32_t *bits = image->bits + image->rowstride * y; - int i; - - for (i = 0; i < width; ++i) - { - uint32_t *pixel = ((uint32_t *) bits) + ((i + x) >> 5); - uint32_t mask, v; - -#ifdef WORDS_BIGENDIAN - mask = 1 << (0x1f - ((i + x) & 0x1f)); -#else - mask = 1 << ((i + x) & 0x1f); -#endif - v = values[i] & 0x80000000 ? mask : 0; - - WRITE (image, pixel, (READ (image, pixel) & ~mask) | v); - } -} - -static void -store_scanline_g1 (bits_image_t * image, - int x, - int y, - int width, - const uint32_t *values) -{ - uint32_t *bits = image->bits + image->rowstride * y; - const pixman_indexed_t *indexed = image->indexed; - int i; - - for (i = 0; i < width; ++i) - { - uint32_t *pixel = ((uint32_t *) bits) + ((i + x) >> 5); - uint32_t mask, v; - -#ifdef WORDS_BIGENDIAN - mask = 1 << (0x1f - ((i + x) & 0x1f)); -#else - mask = 1 << ((i + x) & 0x1f); -#endif - v = RGB24_TO_ENTRY_Y (indexed, values[i]) ? mask : 0; - - WRITE (image, pixel, (READ (image, pixel) & ~mask) | v); - } -} - -/* - * Contracts a 64bpp image to 32bpp and then stores it using a regular 32-bit - * store proc. Despite the type, this function expects a uint64_t buffer. - */ -static void -store_scanline_generic_64 (bits_image_t * image, - int x, - int y, - int width, - const uint32_t *values) -{ - uint32_t *argb8_pixels; - - assert (image->common.type == BITS); - - argb8_pixels = pixman_malloc_ab (width, sizeof(uint32_t)); - if (!argb8_pixels) - return; - - /* Contract the scanline. We could do this in place if values weren't - * const. - */ - pixman_contract (argb8_pixels, (uint64_t *)values, width); - - image->store_scanline_raw_32 (image, x, y, width, argb8_pixels); - - free (argb8_pixels); -} - -/* Despite the type, this function expects both buffer - * and mask to be uint64_t - */ -static void -fetch_scanline_generic_64 (pixman_image_t *image, - int x, - int y, - int width, - uint32_t * buffer, - const uint32_t *mask, - uint32_t mask_bits) -{ - /* Fetch the pixels into the first half of buffer and then expand them in - * place. - */ - image->bits.fetch_scanline_raw_32 (image, x, y, width, buffer, NULL, 0); - - pixman_expand ((uint64_t *)buffer, buffer, image->bits.format, width); -} - -/* Despite the type, this function expects a uint64_t *buffer */ -static uint64_t -fetch_pixel_generic_64 (bits_image_t *image, - int offset, - int line) -{ - uint32_t pixel32 = image->fetch_pixel_raw_32 (image, offset, line); - uint64_t result; - - pixman_expand ((uint64_t *)&result, &pixel32, image->format, 1); - - return result; -} - -/* - * XXX: The transformed fetch path only works at 32-bpp so far. When all - * paths have wide versions, this can be removed. - * - * WARNING: This function loses precision! - */ -static uint32_t -fetch_pixel_generic_lossy_32 (bits_image_t *image, - int offset, - int line) -{ - uint64_t pixel64 = image->fetch_pixel_raw_64 (image, offset, line); - uint32_t result; - - pixman_contract (&result, &pixel64, 1); - - return result; -} - -typedef struct -{ - pixman_format_code_t format; - fetch_scanline_t fetch_scanline_raw_32; - fetch_scanline_t fetch_scanline_raw_64; - fetch_pixel_32_t fetch_pixel_raw_32; - fetch_pixel_64_t fetch_pixel_raw_64; - store_scanline_t store_scanline_raw_32; - store_scanline_t store_scanline_raw_64; -} format_info_t; - -#define FORMAT_INFO(format) \ - { \ - PIXMAN_ ## format, \ - fetch_scanline_ ## format, \ - fetch_scanline_generic_64, \ - fetch_pixel_ ## format, fetch_pixel_generic_64, \ - store_scanline_ ## format, store_scanline_generic_64 \ - } - -static const format_info_t accessors[] = -{ -/* 32 bpp formats */ - FORMAT_INFO (a8r8g8b8), - FORMAT_INFO (x8r8g8b8), - FORMAT_INFO (a8b8g8r8), - FORMAT_INFO (x8b8g8r8), - FORMAT_INFO (b8g8r8a8), - FORMAT_INFO (b8g8r8x8), - -/* 24bpp formats */ - FORMAT_INFO (r8g8b8), - FORMAT_INFO (b8g8r8), - -/* 16bpp formats */ - FORMAT_INFO (r5g6b5), - FORMAT_INFO (b5g6r5), - - FORMAT_INFO (a1r5g5b5), - FORMAT_INFO (x1r5g5b5), - FORMAT_INFO (a1b5g5r5), - FORMAT_INFO (x1b5g5r5), - FORMAT_INFO (a4r4g4b4), - FORMAT_INFO (x4r4g4b4), - FORMAT_INFO (a4b4g4r4), - FORMAT_INFO (x4b4g4r4), - -/* 8bpp formats */ - FORMAT_INFO (a8), - FORMAT_INFO (r3g3b2), - FORMAT_INFO (b2g3r3), - FORMAT_INFO (a2r2g2b2), - FORMAT_INFO (a2b2g2r2), - - FORMAT_INFO (c8), - -#define fetch_scanline_g8 fetch_scanline_c8 -#define fetch_pixel_g8 fetch_pixel_c8 -#define store_scanline_g8 store_scanline_c8 - FORMAT_INFO (g8), - -#define fetch_scanline_x4c4 fetch_scanline_c8 -#define fetch_pixel_x4c4 fetch_pixel_c8 -#define store_scanline_x4c4 store_scanline_c8 - FORMAT_INFO (x4c4), - -#define fetch_scanline_x4g4 fetch_scanline_c8 -#define fetch_pixel_x4g4 fetch_pixel_c8 -#define store_scanline_x4g4 store_scanline_c8 - FORMAT_INFO (x4g4), - - FORMAT_INFO (x4a4), - -/* 4bpp formats */ - FORMAT_INFO (a4), - FORMAT_INFO (r1g2b1), - FORMAT_INFO (b1g2r1), - FORMAT_INFO (a1r1g1b1), - FORMAT_INFO (a1b1g1r1), - - FORMAT_INFO (c4), - -#define fetch_scanline_g4 fetch_scanline_c4 -#define fetch_pixel_g4 fetch_pixel_c4 -#define store_scanline_g4 store_scanline_c4 - FORMAT_INFO (g4), - -/* 1bpp formats */ - FORMAT_INFO (a1), - FORMAT_INFO (g1), - -/* Wide formats */ - - { PIXMAN_a2r10g10b10, - NULL, fetch_scanline_a2r10g10b10, - fetch_pixel_generic_lossy_32, fetch_pixel_a2r10g10b10, - NULL, store_scanline_a2r10g10b10 }, - - { PIXMAN_x2r10g10b10, - NULL, fetch_scanline_x2r10g10b10, - fetch_pixel_generic_lossy_32, fetch_pixel_x2r10g10b10, - NULL, store_scanline_x2r10g10b10 }, - - { PIXMAN_a2b10g10r10, - NULL, fetch_scanline_a2b10g10r10, - fetch_pixel_generic_lossy_32, fetch_pixel_a2b10g10r10, - NULL, store_scanline_a2b10g10r10 }, - - { PIXMAN_x2b10g10r10, - NULL, fetch_scanline_x2b10g10r10, - fetch_pixel_generic_lossy_32, fetch_pixel_x2b10g10r10, - NULL, store_scanline_x2b10g10r10 }, - -/* YUV formats */ - { PIXMAN_yuy2, - fetch_scanline_yuy2, fetch_scanline_generic_64, - fetch_pixel_yuy2, fetch_pixel_generic_64, - NULL, NULL }, - - { PIXMAN_yv12, - fetch_scanline_yv12, fetch_scanline_generic_64, - fetch_pixel_yv12, fetch_pixel_generic_64, - NULL, NULL }, - - { PIXMAN_null }, -}; - -static void -setup_accessors (bits_image_t *image) -{ - const format_info_t *info = accessors; - - while (info->format != PIXMAN_null) - { - if (info->format == image->format) - { - image->fetch_scanline_raw_32 = info->fetch_scanline_raw_32; - image->fetch_scanline_raw_64 = info->fetch_scanline_raw_64; - image->fetch_pixel_raw_32 = info->fetch_pixel_raw_32; - image->fetch_pixel_raw_64 = info->fetch_pixel_raw_64; - image->store_scanline_raw_32 = info->store_scanline_raw_32; - image->store_scanline_raw_64 = info->store_scanline_raw_64; - - return; - } - - info++; - } -} - -#ifndef PIXMAN_FB_ACCESSORS -void -_pixman_bits_image_setup_raw_accessors_accessors (bits_image_t *image); - -void -_pixman_bits_image_setup_raw_accessors (bits_image_t *image) -{ - if (image->read_func || image->write_func) - _pixman_bits_image_setup_raw_accessors_accessors (image); - else - setup_accessors (image); -} - -#else - -void -_pixman_bits_image_setup_raw_accessors_accessors (bits_image_t *image) -{ - setup_accessors (image); -} - -#endif +/*
+ *
+ * Copyright © 2000 Keith Packard, member of The XFree86 Project, Inc.
+ * 2005 Lars Knoll & Zack Rusin, Trolltech
+ * 2008 Aaron Plattner, NVIDIA Corporation
+ *
+ * Permission to use, copy, modify, distribute, and sell this software and its
+ * documentation for any purpose is hereby granted without fee, provided that
+ * the above copyright notice appear in all copies and that both that
+ * copyright notice and this permission notice appear in supporting
+ * documentation, and that the name of Keith Packard not be used in
+ * advertising or publicity pertaining to distribution of the software without
+ * specific, written prior permission. Keith Packard makes no
+ * representations about the suitability of this software for any purpose. It
+ * is provided "as is" without express or implied warranty.
+ *
+ * THE COPYRIGHT HOLDERS DISCLAIM ALL WARRANTIES WITH REGARD TO THIS
+ * SOFTWARE, INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND
+ * FITNESS, IN NO EVENT SHALL THE COPYRIGHT HOLDERS BE LIABLE FOR ANY
+ * SPECIAL, INDIRECT OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN
+ * AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING
+ * OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS
+ * SOFTWARE.
+ */
+
+#ifdef HAVE_CONFIG_H
+#include <config.h>
+#endif
+
+#include <stdlib.h>
+#include <string.h>
+#include <assert.h>
+
+#include "pixman-private.h"
+#include "pixman-accessor.h"
+
+#define CONVERT_RGB24_TO_Y15(s) \
+ (((((s) >> 16) & 0xff) * 153 + \
+ (((s) >> 8) & 0xff) * 301 + \
+ (((s) ) & 0xff) * 58) >> 2)
+
+#define CONVERT_RGB24_TO_RGB15(s) \
+ ((((s) >> 3) & 0x001f) | \
+ (((s) >> 6) & 0x03e0) | \
+ (((s) >> 9) & 0x7c00))
+
+#define RGB15_TO_ENTRY(mif,rgb15) \
+ ((mif)->ent[rgb15])
+
+#define RGB24_TO_ENTRY(mif,rgb24) \
+ RGB15_TO_ENTRY (mif,CONVERT_RGB24_TO_RGB15 (rgb24))
+
+#define RGB24_TO_ENTRY_Y(mif,rgb24) \
+ ((mif)->ent[CONVERT_RGB24_TO_Y15 (rgb24)])
+
+/*
+ * YV12 setup and access macros
+ */
+
+#define YV12_SETUP(image) \
+ bits_image_t *__bits_image = (bits_image_t *)image; \
+ uint32_t *bits = __bits_image->bits; \
+ int stride = __bits_image->rowstride; \
+ int offset0 = stride < 0 ? \
+ ((-stride) >> 1) * ((__bits_image->height - 1) >> 1) - stride : \
+ stride * __bits_image->height; \
+ int offset1 = stride < 0 ? \
+ offset0 + ((-stride) >> 1) * ((__bits_image->height) >> 1) : \
+ offset0 + (offset0 >> 2)
+
+/* Note no trailing semicolon on the above macro; if it's there, then
+ * the typical usage of YV12_SETUP(image); will have an extra trailing ;
+ * that some compilers will interpret as a statement -- and then any further
+ * variable declarations will cause an error.
+ */
+
+#define YV12_Y(line) \
+ ((uint8_t *) ((bits) + (stride) * (line)))
+
+#define YV12_U(line) \
+ ((uint8_t *) ((bits) + offset1 + \
+ ((stride) >> 1) * ((line) >> 1)))
+
+#define YV12_V(line) \
+ ((uint8_t *) ((bits) + offset0 + \
+ ((stride) >> 1) * ((line) >> 1)))
+
+/********************************** Fetch ************************************/
+
+static void
+fetch_scanline_a8r8g8b8 (pixman_image_t *image,
+ int x,
+ int y,
+ int width,
+ uint32_t * buffer,
+ const uint32_t *mask)
+{
+ const uint32_t *bits = image->bits.bits + y * image->bits.rowstride;
+
+ MEMCPY_WRAPPED (image,
+ buffer, (const uint32_t *)bits + x,
+ width * sizeof(uint32_t));
+}
+
+static void
+fetch_scanline_x8r8g8b8 (pixman_image_t *image,
+ int x,
+ int y,
+ int width,
+ uint32_t * buffer,
+ const uint32_t *mask)
+{
+ const uint32_t *bits = image->bits.bits + y * image->bits.rowstride;
+ const uint32_t *pixel = (const uint32_t *)bits + x;
+ const uint32_t *end = pixel + width;
+
+ while (pixel < end)
+ *buffer++ = READ (image, pixel++) | 0xff000000;
+}
+
+static void
+fetch_scanline_a8b8g8r8 (pixman_image_t *image,
+ int x,
+ int y,
+ int width,
+ uint32_t * buffer,
+ const uint32_t *mask)
+{
+ const uint32_t *bits = image->bits.bits + y * image->bits.rowstride;
+ const uint32_t *pixel = (uint32_t *)bits + x;
+ const uint32_t *end = pixel + width;
+
+ while (pixel < end)
+ {
+ uint32_t p = READ (image, pixel++);
+
+ *buffer++ = (p & 0xff00ff00) |
+ ((p >> 16) & 0xff) |
+ ((p & 0xff) << 16);
+ }
+}
+
+static void
+fetch_scanline_x8b8g8r8 (pixman_image_t *image,
+ int x,
+ int y,
+ int width,
+ uint32_t * buffer,
+ const uint32_t *mask)
+{
+ const uint32_t *bits = image->bits.bits + y * image->bits.rowstride;
+ const uint32_t *pixel = (uint32_t *)bits + x;
+ const uint32_t *end = pixel + width;
+
+ while (pixel < end)
+ {
+ uint32_t p = READ (image, pixel++);
+
+ *buffer++ = 0xff000000 |
+ (p & 0x0000ff00) |
+ ((p >> 16) & 0xff) |
+ ((p & 0xff) << 16);
+ }
+}
+
+static void
+fetch_scanline_b8g8r8a8 (pixman_image_t *image,
+ int x,
+ int y,
+ int width,
+ uint32_t * buffer,
+ const uint32_t *mask)
+{
+ const uint32_t *bits = image->bits.bits + y * image->bits.rowstride;
+ const uint32_t *pixel = (uint32_t *)bits + x;
+ const uint32_t *end = pixel + width;
+
+ while (pixel < end)
+ {
+ uint32_t p = READ (image, pixel++);
+
+ *buffer++ = (((p & 0xff000000) >> 24) |
+ ((p & 0x00ff0000) >> 8) |
+ ((p & 0x0000ff00) << 8) |
+ ((p & 0x000000ff) << 24));
+ }
+}
+
+static void
+fetch_scanline_b8g8r8x8 (pixman_image_t *image,
+ int x,
+ int y,
+ int width,
+ uint32_t * buffer,
+ const uint32_t *mask)
+{
+ const uint32_t *bits = image->bits.bits + y * image->bits.rowstride;
+ const uint32_t *pixel = (uint32_t *)bits + x;
+ const uint32_t *end = pixel + width;
+
+ while (pixel < end)
+ {
+ uint32_t p = READ (image, pixel++);
+
+ *buffer++ = (0xff000000 |
+ ((p & 0xff000000) >> 24) |
+ ((p & 0x00ff0000) >> 8) |
+ ((p & 0x0000ff00) << 8));
+ }
+}
+
+static void
+fetch_scanline_x14r6g6b6 (pixman_image_t *image,
+ int x,
+ int y,
+ int width,
+ uint32_t * buffer,
+ const uint32_t *mask)
+{
+ const uint32_t *bits = image->bits.bits + y * image->bits.rowstride;
+ const uint32_t *pixel = (const uint32_t *)bits + x;
+ const uint32_t *end = pixel + width;
+
+ while (pixel < end)
+ {
+ uint32_t p = READ (image, pixel++);
+ uint32_t r, g, b;
+
+ r = ((p & 0x3f000) << 6) | ((p & 0x30000));
+ g = ((p & 0x00fc0) << 4) | ((p & 0x00c00) >> 2);
+ b = ((p & 0x0003f) << 2) | ((p & 0x00030) >> 4);
+
+ *buffer++ = 0xff000000 | r | g | b;
+ }
+}
+
+/* Expects a uint64_t buffer */
+static void
+fetch_scanline_a2r10g10b10 (pixman_image_t *image,
+ int x,
+ int y,
+ int width,
+ uint32_t * b,
+ const uint32_t *mask)
+{
+ const uint32_t *bits = image->bits.bits + y * image->bits.rowstride;
+ const uint32_t *pixel = bits + x;
+ const uint32_t *end = pixel + width;
+ uint64_t *buffer = (uint64_t *)b;
+
+ while (pixel < end)
+ {
+ uint32_t p = READ (image, pixel++);
+ uint64_t a = p >> 30;
+ uint64_t r = (p >> 20) & 0x3ff;
+ uint64_t g = (p >> 10) & 0x3ff;
+ uint64_t b = p & 0x3ff;
+
+ r = r << 6 | r >> 4;
+ g = g << 6 | g >> 4;
+ b = b << 6 | b >> 4;
+
+ a <<= 14;
+ a |= a >> 2;
+ a |= a >> 4;
+ a |= a >> 8;
+
+ *buffer++ = a << 48 | r << 32 | g << 16 | b;
+ }
+}
+
+/* Expects a uint64_t buffer */
+static void
+fetch_scanline_x2r10g10b10 (pixman_image_t *image,
+ int x,
+ int y,
+ int width,
+ uint32_t * b,
+ const uint32_t *mask)
+{
+ const uint32_t *bits = image->bits.bits + y * image->bits.rowstride;
+ const uint32_t *pixel = (uint32_t *)bits + x;
+ const uint32_t *end = pixel + width;
+ uint64_t *buffer = (uint64_t *)b;
+
+ while (pixel < end)
+ {
+ uint32_t p = READ (image, pixel++);
+ uint64_t r = (p >> 20) & 0x3ff;
+ uint64_t g = (p >> 10) & 0x3ff;
+ uint64_t b = p & 0x3ff;
+
+ r = r << 6 | r >> 4;
+ g = g << 6 | g >> 4;
+ b = b << 6 | b >> 4;
+
+ *buffer++ = 0xffffULL << 48 | r << 32 | g << 16 | b;
+ }
+}
+
+/* Expects a uint64_t buffer */
+static void
+fetch_scanline_a2b10g10r10 (pixman_image_t *image,
+ int x,
+ int y,
+ int width,
+ uint32_t * b,
+ const uint32_t *mask)
+{
+ const uint32_t *bits = image->bits.bits + y * image->bits.rowstride;
+ const uint32_t *pixel = bits + x;
+ const uint32_t *end = pixel + width;
+ uint64_t *buffer = (uint64_t *)b;
+
+ while (pixel < end)
+ {
+ uint32_t p = READ (image, pixel++);
+ uint64_t a = p >> 30;
+ uint64_t b = (p >> 20) & 0x3ff;
+ uint64_t g = (p >> 10) & 0x3ff;
+ uint64_t r = p & 0x3ff;
+
+ r = r << 6 | r >> 4;
+ g = g << 6 | g >> 4;
+ b = b << 6 | b >> 4;
+
+ a <<= 14;
+ a |= a >> 2;
+ a |= a >> 4;
+ a |= a >> 8;
+
+ *buffer++ = a << 48 | r << 32 | g << 16 | b;
+ }
+}
+
+/* Expects a uint64_t buffer */
+static void
+fetch_scanline_x2b10g10r10 (pixman_image_t *image,
+ int x,
+ int y,
+ int width,
+ uint32_t * b,
+ const uint32_t *mask)
+{
+ const uint32_t *bits = image->bits.bits + y * image->bits.rowstride;
+ const uint32_t *pixel = (uint32_t *)bits + x;
+ const uint32_t *end = pixel + width;
+ uint64_t *buffer = (uint64_t *)b;
+
+ while (pixel < end)
+ {
+ uint32_t p = READ (image, pixel++);
+ uint64_t b = (p >> 20) & 0x3ff;
+ uint64_t g = (p >> 10) & 0x3ff;
+ uint64_t r = p & 0x3ff;
+
+ r = r << 6 | r >> 4;
+ g = g << 6 | g >> 4;
+ b = b << 6 | b >> 4;
+
+ *buffer++ = 0xffffULL << 48 | r << 32 | g << 16 | b;
+ }
+}
+
+static void
+fetch_scanline_r8g8b8 (pixman_image_t *image,
+ int x,
+ int y,
+ int width,
+ uint32_t * buffer,
+ const uint32_t *mask)
+{
+ const uint32_t *bits = image->bits.bits + y * image->bits.rowstride;
+ const uint8_t *pixel = (const uint8_t *)bits + 3 * x;
+ const uint8_t *end = pixel + 3 * width;
+
+ while (pixel < end)
+ {
+ uint32_t b = 0xff000000;
+
+#ifdef WORDS_BIGENDIAN
+ b |= (READ (image, pixel++) << 16);
+ b |= (READ (image, pixel++) << 8);
+ b |= (READ (image, pixel++));
+#else
+ b |= (READ (image, pixel++));
+ b |= (READ (image, pixel++) << 8);
+ b |= (READ (image, pixel++) << 16);
+#endif
+
+ *buffer++ = b;
+ }
+}
+
+static void
+fetch_scanline_b8g8r8 (pixman_image_t *image,
+ int x,
+ int y,
+ int width,
+ uint32_t * buffer,
+ const uint32_t *mask)
+{
+ const uint32_t *bits = image->bits.bits + y * image->bits.rowstride;
+ const uint8_t *pixel = (const uint8_t *)bits + 3 * x;
+ const uint8_t *end = pixel + 3 * width;
+
+ while (pixel < end)
+ {
+ uint32_t b = 0xff000000;
+#ifdef WORDS_BIGENDIAN
+ b |= (READ (image, pixel++));
+ b |= (READ (image, pixel++) << 8);
+ b |= (READ (image, pixel++) << 16);
+#else
+ b |= (READ (image, pixel++) << 16);
+ b |= (READ (image, pixel++) << 8);
+ b |= (READ (image, pixel++));
+#endif
+ *buffer++ = b;
+ }
+}
+
+static void
+fetch_scanline_r5g6b5 (pixman_image_t *image,
+ int x,
+ int y,
+ int width,
+ uint32_t * buffer,
+ const uint32_t *mask)
+{
+ const uint32_t *bits = image->bits.bits + y * image->bits.rowstride;
+ const uint16_t *pixel = (const uint16_t *)bits + x;
+ const uint16_t *end = pixel + width;
+
+ while (pixel < end)
+ {
+ uint32_t p = READ (image, pixel++);
+ uint32_t r = (((p) << 3) & 0xf8) |
+ (((p) << 5) & 0xfc00) |
+ (((p) << 8) & 0xf80000);
+
+ r |= (r >> 5) & 0x70007;
+ r |= (r >> 6) & 0x300;
+
+ *buffer++ = 0xff000000 | r;
+ }
+}
+
+static void
+fetch_scanline_b5g6r5 (pixman_image_t *image,
+ int x,
+ int y,
+ int width,
+ uint32_t * buffer,
+ const uint32_t *mask)
+{
+ const uint32_t *bits = image->bits.bits + y * image->bits.rowstride;
+ const uint16_t *pixel = (const uint16_t *)bits + x;
+ const uint16_t *end = pixel + width;
+
+ while (pixel < end)
+ {
+ uint32_t p = READ (image, pixel++);
+ uint32_t r, g, b;
+
+ b = ((p & 0xf800) | ((p & 0xe000) >> 5)) >> 8;
+ g = ((p & 0x07e0) | ((p & 0x0600) >> 6)) << 5;
+ r = ((p & 0x001c) | ((p & 0x001f) << 5)) << 14;
+
+ *buffer++ = 0xff000000 | r | g | b;
+ }
+}
+
+static void
+fetch_scanline_a1r5g5b5 (pixman_image_t *image,
+ int x,
+ int y,
+ int width,
+ uint32_t * buffer,
+ const uint32_t *mask)
+{
+ const uint32_t *bits = image->bits.bits + y * image->bits.rowstride;
+ const uint16_t *pixel = (const uint16_t *)bits + x;
+ const uint16_t *end = pixel + width;
+
+ while (pixel < end)
+ {
+ uint32_t p = READ (image, pixel++);
+ uint32_t r, g, b, a;
+
+ a = (uint32_t) ((uint8_t) (0 - ((p & 0x8000) >> 15))) << 24;
+ r = ((p & 0x7c00) | ((p & 0x7000) >> 5)) << 9;
+ g = ((p & 0x03e0) | ((p & 0x0380) >> 5)) << 6;
+ b = ((p & 0x001c) | ((p & 0x001f) << 5)) >> 2;
+
+ *buffer++ = a | r | g | b;
+ }
+}
+
+static void
+fetch_scanline_x1r5g5b5 (pixman_image_t *image,
+ int x,
+ int y,
+ int width,
+ uint32_t * buffer,
+ const uint32_t *mask)
+{
+ const uint32_t *bits = image->bits.bits + y * image->bits.rowstride;
+ const uint16_t *pixel = (const uint16_t *)bits + x;
+ const uint16_t *end = pixel + width;
+
+ while (pixel < end)
+ {
+ uint32_t p = READ (image, pixel++);
+ uint32_t r, g, b;
+
+ r = ((p & 0x7c00) | ((p & 0x7000) >> 5)) << 9;
+ g = ((p & 0x03e0) | ((p & 0x0380) >> 5)) << 6;
+ b = ((p & 0x001c) | ((p & 0x001f) << 5)) >> 2;
+
+ *buffer++ = 0xff000000 | r | g | b;
+ }
+}
+
+static void
+fetch_scanline_a1b5g5r5 (pixman_image_t *image,
+ int x,
+ int y,
+ int width,
+ uint32_t * buffer,
+ const uint32_t *mask)
+{
+ const uint32_t *bits = image->bits.bits + y * image->bits.rowstride;
+ const uint16_t *pixel = (const uint16_t *)bits + x;
+ const uint16_t *end = pixel + width;
+ uint32_t r, g, b, a;
+
+ while (pixel < end)
+ {
+ uint32_t p = READ (image, pixel++);
+
+ a = (uint32_t) ((uint8_t) (0 - ((p & 0x8000) >> 15))) << 24;
+ b = ((p & 0x7c00) | ((p & 0x7000) >> 5)) >> 7;
+ g = ((p & 0x03e0) | ((p & 0x0380) >> 5)) << 6;
+ r = ((p & 0x001c) | ((p & 0x001f) << 5)) << 14;
+
+ *buffer++ = a | r | g | b;
+ }
+}
+
+static void
+fetch_scanline_x1b5g5r5 (pixman_image_t *image,
+ int x,
+ int y,
+ int width,
+ uint32_t * buffer,
+ const uint32_t *mask)
+{
+ const uint32_t *bits = image->bits.bits + y * image->bits.rowstride;
+ const uint16_t *pixel = (const uint16_t *)bits + x;
+ const uint16_t *end = pixel + width;
+
+ while (pixel < end)
+ {
+ uint32_t p = READ (image, pixel++);
+ uint32_t r, g, b;
+
+ b = ((p & 0x7c00) | ((p & 0x7000) >> 5)) >> 7;
+ g = ((p & 0x03e0) | ((p & 0x0380) >> 5)) << 6;
+ r = ((p & 0x001c) | ((p & 0x001f) << 5)) << 14;
+
+ *buffer++ = 0xff000000 | r | g | b;
+ }
+}
+
+static void
+fetch_scanline_a4r4g4b4 (pixman_image_t *image,
+ int x,
+ int y,
+ int width,
+ uint32_t * buffer,
+ const uint32_t *mask)
+{
+ const uint32_t *bits = image->bits.bits + y * image->bits.rowstride;
+ const uint16_t *pixel = (const uint16_t *)bits + x;
+ const uint16_t *end = pixel + width;
+
+ while (pixel < end)
+ {
+ uint32_t p = READ (image, pixel++);
+ uint32_t r, g, b, a;
+
+ a = ((p & 0xf000) | ((p & 0xf000) >> 4)) << 16;
+ r = ((p & 0x0f00) | ((p & 0x0f00) >> 4)) << 12;
+ g = ((p & 0x00f0) | ((p & 0x00f0) >> 4)) << 8;
+ b = ((p & 0x000f) | ((p & 0x000f) << 4));
+
+ *buffer++ = a | r | g | b;
+ }
+}
+
+static void
+fetch_scanline_x4r4g4b4 (pixman_image_t *image,
+ int x,
+ int y,
+ int width,
+ uint32_t * buffer,
+ const uint32_t *mask)
+{
+ const uint32_t *bits = image->bits.bits + y * image->bits.rowstride;
+ const uint16_t *pixel = (const uint16_t *)bits + x;
+ const uint16_t *end = pixel + width;
+
+ while (pixel < end)
+ {
+ uint32_t p = READ (image, pixel++);
+ uint32_t r, g, b;
+
+ r = ((p & 0x0f00) | ((p & 0x0f00) >> 4)) << 12;
+ g = ((p & 0x00f0) | ((p & 0x00f0) >> 4)) << 8;
+ b = ((p & 0x000f) | ((p & 0x000f) << 4));
+
+ *buffer++ = 0xff000000 | r | g | b;
+ }
+}
+
+static void
+fetch_scanline_a4b4g4r4 (pixman_image_t *image,
+ int x,
+ int y,
+ int width,
+ uint32_t * buffer,
+ const uint32_t *mask)
+{
+ const uint32_t *bits = image->bits.bits + y * image->bits.rowstride;
+ const uint16_t *pixel = (const uint16_t *)bits + x;
+ const uint16_t *end = pixel + width;
+
+ while (pixel < end)
+ {
+ uint32_t p = READ (image, pixel++);
+ uint32_t r, g, b, a;
+
+ a = ((p & 0xf000) | ((p & 0xf000) >> 4)) << 16;
+ b = ((p & 0x0f00) | ((p & 0x0f00) >> 4)) >> 4;
+ g = ((p & 0x00f0) | ((p & 0x00f0) >> 4)) << 8;
+ r = ((p & 0x000f) | ((p & 0x000f) << 4)) << 16;
+
+ *buffer++ = a | r | g | b;
+ }
+}
+
+static void
+fetch_scanline_x4b4g4r4 (pixman_image_t *image,
+ int x,
+ int y,
+ int width,
+ uint32_t * buffer,
+ const uint32_t *mask)
+{
+ const uint32_t *bits = image->bits.bits + y * image->bits.rowstride;
+ const uint16_t *pixel = (const uint16_t *)bits + x;
+ const uint16_t *end = pixel + width;
+
+ while (pixel < end)
+ {
+ uint32_t p = READ (image, pixel++);
+ uint32_t r, g, b;
+
+ b = ((p & 0x0f00) | ((p & 0x0f00) >> 4)) >> 4;
+ g = ((p & 0x00f0) | ((p & 0x00f0) >> 4)) << 8;
+ r = ((p & 0x000f) | ((p & 0x000f) << 4)) << 16;
+
+ *buffer++ = 0xff000000 | r | g | b;
+ }
+}
+
+static void
+fetch_scanline_a8 (pixman_image_t *image,
+ int x,
+ int y,
+ int width,
+ uint32_t * buffer,
+ const uint32_t *mask)
+{
+ const uint32_t *bits = image->bits.bits + y * image->bits.rowstride;
+ const uint8_t *pixel = (const uint8_t *)bits + x;
+ const uint8_t *end = pixel + width;
+
+ while (pixel < end)
+ *buffer++ = READ (image, pixel++) << 24;
+}
+
+static void
+fetch_scanline_r3g3b2 (pixman_image_t *image,
+ int x,
+ int y,
+ int width,
+ uint32_t * buffer,
+ const uint32_t *mask)
+{
+ const uint32_t *bits = image->bits.bits + y * image->bits.rowstride;
+ const uint8_t *pixel = (const uint8_t *)bits + x;
+ const uint8_t *end = pixel + width;
+
+ while (pixel < end)
+ {
+ uint32_t p = READ (image, pixel++);
+ uint32_t r, g, b;
+
+ r = ((p & 0xe0) | ((p & 0xe0) >> 3) | ((p & 0xc0) >> 6)) << 16;
+ g = ((p & 0x1c) | ((p & 0x18) >> 3) | ((p & 0x1c) << 3)) << 8;
+ b = (((p & 0x03) ) |
+ ((p & 0x03) << 2) |
+ ((p & 0x03) << 4) |
+ ((p & 0x03) << 6));
+
+ *buffer++ = 0xff000000 | r | g | b;
+ }
+}
+
+static void
+fetch_scanline_b2g3r3 (pixman_image_t *image,
+ int x,
+ int y,
+ int width,
+ uint32_t * buffer,
+ const uint32_t *mask)
+{
+ const uint32_t *bits = image->bits.bits + y * image->bits.rowstride;
+ const uint8_t *pixel = (const uint8_t *)bits + x;
+ const uint8_t *end = pixel + width;
+
+ while (pixel < end)
+ {
+ uint32_t p = READ (image, pixel++);
+ uint32_t r, g, b;
+
+ b = p & 0xc0;
+ b |= b >> 2;
+ b |= b >> 4;
+ b &= 0xff;
+
+ g = (p & 0x38) << 10;
+ g |= g >> 3;
+ g |= g >> 6;
+ g &= 0xff00;
+
+ r = (p & 0x7) << 21;
+ r |= r >> 3;
+ r |= r >> 6;
+ r &= 0xff0000;
+
+ *buffer++ = 0xff000000 | r | g | b;
+ }
+}
+
+static void
+fetch_scanline_a2r2g2b2 (pixman_image_t *image,
+ int x,
+ int y,
+ int width,
+ uint32_t * buffer,
+ const uint32_t *mask)
+{
+ const uint32_t *bits = image->bits.bits + y * image->bits.rowstride;
+ const uint8_t *pixel = (const uint8_t *)bits + x;
+ const uint8_t *end = pixel + width;
+
+ while (pixel < end)
+ {
+ uint32_t p = READ (image, pixel++);
+ uint32_t a, r, g, b;
+
+ a = ((p & 0xc0) * 0x55) << 18;
+ r = ((p & 0x30) * 0x55) << 12;
+ g = ((p & 0x0c) * 0x55) << 6;
+ b = ((p & 0x03) * 0x55);
+
+ *buffer++ = a | r | g | b;
+ }
+}
+
+static void
+fetch_scanline_a2b2g2r2 (pixman_image_t *image,
+ int x,
+ int y,
+ int width,
+ uint32_t * buffer,
+ const uint32_t *mask)
+{
+ const uint32_t *bits = image->bits.bits + y * image->bits.rowstride;
+ const uint8_t *pixel = (const uint8_t *)bits + x;
+ const uint8_t *end = pixel + width;
+
+ while (pixel < end)
+ {
+ uint32_t p = READ (image, pixel++);
+ uint32_t a, r, g, b;
+
+ a = ((p & 0xc0) * 0x55) << 18;
+ b = ((p & 0x30) * 0x55) >> 4;
+ g = ((p & 0x0c) * 0x55) << 6;
+ r = ((p & 0x03) * 0x55) << 16;
+
+ *buffer++ = a | r | g | b;
+ }
+}
+
+static void
+fetch_scanline_c8 (pixman_image_t *image,
+ int x,
+ int y,
+ int width,
+ uint32_t * buffer,
+ const uint32_t *mask)
+{
+ const uint32_t *bits = image->bits.bits + y * image->bits.rowstride;
+ const pixman_indexed_t * indexed = image->bits.indexed;
+ const uint8_t *pixel = (const uint8_t *)bits + x;
+ const uint8_t *end = pixel + width;
+
+ while (pixel < end)
+ {
+ uint32_t p = READ (image, pixel++);
+
+ *buffer++ = indexed->rgba[p];
+ }
+}
+
+static void
+fetch_scanline_x4a4 (pixman_image_t *image,
+ int x,
+ int y,
+ int width,
+ uint32_t * buffer,
+ const uint32_t *mask)
+{
+ const uint32_t *bits = image->bits.bits + y * image->bits.rowstride;
+ const uint8_t *pixel = (const uint8_t *)bits + x;
+ const uint8_t *end = pixel + width;
+
+ while (pixel < end)
+ {
+ uint8_t p = READ (image, pixel++) & 0xf;
+
+ *buffer++ = (p | (p << 4)) << 24;
+ }
+}
+
+#define FETCH_8(img,l,o) (READ (img, (((uint8_t *)(l)) + ((o) >> 3))))
+#ifdef WORDS_BIGENDIAN
+#define FETCH_4(img,l,o) \
+ (((4 * (o)) & 4) ? (FETCH_8 (img,l, 4 * (o)) & 0xf) : (FETCH_8 (img,l,(4 * (o))) >> 4))
+#else
+#define FETCH_4(img,l,o) \
+ (((4 * (o)) & 4) ? (FETCH_8 (img, l, 4 * (o)) >> 4) : (FETCH_8 (img, l, (4 * (o))) & 0xf))
+#endif
+
+static void
+fetch_scanline_a4 (pixman_image_t *image,
+ int x,
+ int y,
+ int width,
+ uint32_t * buffer,
+ const uint32_t *mask)
+{
+ const uint32_t *bits = image->bits.bits + y * image->bits.rowstride;
+ int i;
+
+ for (i = 0; i < width; ++i)
+ {
+ uint32_t p = FETCH_4 (image, bits, i + x);
+
+ p |= p << 4;
+
+ *buffer++ = p << 24;
+ }
+}
+
+static void
+fetch_scanline_r1g2b1 (pixman_image_t *image,
+ int x,
+ int y,
+ int width,
+ uint32_t * buffer,
+ const uint32_t *mask)
+{
+ const uint32_t *bits = image->bits.bits + y * image->bits.rowstride;
+ int i;
+
+ for (i = 0; i < width; ++i)
+ {
+ uint32_t p = FETCH_4 (image, bits, i + x);
+ uint32_t r, g, b;
+
+ r = ((p & 0x8) * 0xff) << 13;
+ g = ((p & 0x6) * 0x55) << 7;
+ b = ((p & 0x1) * 0xff);
+
+ *buffer++ = 0xff000000 | r | g | b;
+ }
+}
+
+static void
+fetch_scanline_b1g2r1 (pixman_image_t *image,
+ int x,
+ int y,
+ int width,
+ uint32_t * buffer,
+ const uint32_t *mask)
+{
+ const uint32_t *bits = image->bits.bits + y * image->bits.rowstride;
+ int i;
+
+ for (i = 0; i < width; ++i)
+ {
+ uint32_t p = FETCH_4 (image, bits, i + x);
+ uint32_t r, g, b;
+
+ b = ((p & 0x8) * 0xff) >> 3;
+ g = ((p & 0x6) * 0x55) << 7;
+ r = ((p & 0x1) * 0xff) << 16;
+
+ *buffer++ = 0xff000000 | r | g | b;
+ }
+}
+
+static void
+fetch_scanline_a1r1g1b1 (pixman_image_t *image,
+ int x,
+ int y,
+ int width,
+ uint32_t * buffer,
+ const uint32_t *mask)
+{
+ uint32_t a, r, g, b;
+ const uint32_t *bits = image->bits.bits + y * image->bits.rowstride;
+ int i;
+
+ for (i = 0; i < width; ++i)
+ {
+ uint32_t p = FETCH_4 (image, bits, i + x);
+
+ a = ((p & 0x8) * 0xff) << 21;
+ r = ((p & 0x4) * 0xff) << 14;
+ g = ((p & 0x2) * 0xff) << 7;
+ b = ((p & 0x1) * 0xff);
+
+ *buffer++ = a | r | g | b;
+ }
+}
+
+static void
+fetch_scanline_a1b1g1r1 (pixman_image_t *image,
+ int x,
+ int y,
+ int width,
+ uint32_t * buffer,
+ const uint32_t *mask)
+{
+ const uint32_t *bits = image->bits.bits + y * image->bits.rowstride;
+ int i;
+
+ for (i = 0; i < width; ++i)
+ {
+ uint32_t p = FETCH_4 (image, bits, i + x);
+ uint32_t a, r, g, b;
+
+ a = ((p & 0x8) * 0xff) << 21;
+ b = ((p & 0x4) * 0xff) >> 2;
+ g = ((p & 0x2) * 0xff) << 7;
+ r = ((p & 0x1) * 0xff) << 16;
+
+ *buffer++ = a | r | g | b;
+ }
+}
+
+static void
+fetch_scanline_c4 (pixman_image_t *image,
+ int x,
+ int y,
+ int width,
+ uint32_t * buffer,
+ const uint32_t *mask)
+{
+ const uint32_t *bits = image->bits.bits + y * image->bits.rowstride;
+ const pixman_indexed_t * indexed = image->bits.indexed;
+ int i;
+
+ for (i = 0; i < width; ++i)
+ {
+ uint32_t p = FETCH_4 (image, bits, i + x);
+
+ *buffer++ = indexed->rgba[p];
+ }
+}
+
+static void
+fetch_scanline_a1 (pixman_image_t *image,
+ int x,
+ int y,
+ int width,
+ uint32_t * buffer,
+ const uint32_t *mask)
+{
+ const uint32_t *bits = image->bits.bits + y * image->bits.rowstride;
+ int i;
+
+ for (i = 0; i < width; ++i)
+ {
+ uint32_t p = READ (image, bits + ((i + x) >> 5));
+ uint32_t a;
+
+#ifdef WORDS_BIGENDIAN
+ a = p >> (0x1f - ((i + x) & 0x1f));
+#else
+ a = p >> ((i + x) & 0x1f);
+#endif
+ a = a & 1;
+ a |= a << 1;
+ a |= a << 2;
+ a |= a << 4;
+
+ *buffer++ = a << 24;
+ }
+}
+
+static void
+fetch_scanline_g1 (pixman_image_t *image,
+ int x,
+ int y,
+ int width,
+ uint32_t * buffer,
+ const uint32_t *mask)
+{
+ const uint32_t *bits = image->bits.bits + y * image->bits.rowstride;
+ const pixman_indexed_t * indexed = image->bits.indexed;
+ int i;
+
+ for (i = 0; i < width; ++i)
+ {
+ uint32_t p = READ (image, bits + ((i + x) >> 5));
+ uint32_t a;
+
+#ifdef WORDS_BIGENDIAN
+ a = p >> (0x1f - ((i + x) & 0x1f));
+#else
+ a = p >> ((i + x) & 0x1f);
+#endif
+ a = a & 1;
+
+ *buffer++ = indexed->rgba[a];
+ }
+}
+
+static void
+fetch_scanline_yuy2 (pixman_image_t *image,
+ int x,
+ int line,
+ int width,
+ uint32_t * buffer,
+ const uint32_t *mask)
+{
+ const uint32_t *bits = image->bits.bits + image->bits.rowstride * line;
+ int i;
+
+ for (i = 0; i < width; i++)
+ {
+ int16_t y, u, v;
+ int32_t r, g, b;
+
+ y = ((uint8_t *) bits)[(x + i) << 1] - 16;
+ u = ((uint8_t *) bits)[(((x + i) << 1) & - 4) + 1] - 128;
+ v = ((uint8_t *) bits)[(((x + i) << 1) & - 4) + 3] - 128;
+
+ /* R = 1.164(Y - 16) + 1.596(V - 128) */
+ r = 0x012b27 * y + 0x019a2e * v;
+ /* G = 1.164(Y - 16) - 0.813(V - 128) - 0.391(U - 128) */
+ g = 0x012b27 * y - 0x00d0f2 * v - 0x00647e * u;
+ /* B = 1.164(Y - 16) + 2.018(U - 128) */
+ b = 0x012b27 * y + 0x0206a2 * u;
+
+ *buffer++ = 0xff000000 |
+ (r >= 0 ? r < 0x1000000 ? r & 0xff0000 : 0xff0000 : 0) |
+ (g >= 0 ? g < 0x1000000 ? (g >> 8) & 0x00ff00 : 0x00ff00 : 0) |
+ (b >= 0 ? b < 0x1000000 ? (b >> 16) & 0x0000ff : 0x0000ff : 0);
+ }
+}
+
+static void
+fetch_scanline_yv12 (pixman_image_t *image,
+ int x,
+ int line,
+ int width,
+ uint32_t * buffer,
+ const uint32_t *mask)
+{
+ YV12_SETUP (image);
+ uint8_t *y_line = YV12_Y (line);
+ uint8_t *u_line = YV12_U (line);
+ uint8_t *v_line = YV12_V (line);
+ int i;
+
+ for (i = 0; i < width; i++)
+ {
+ int16_t y, u, v;
+ int32_t r, g, b;
+
+ y = y_line[x + i] - 16;
+ u = u_line[(x + i) >> 1] - 128;
+ v = v_line[(x + i) >> 1] - 128;
+
+ /* R = 1.164(Y - 16) + 1.596(V - 128) */
+ r = 0x012b27 * y + 0x019a2e * v;
+ /* G = 1.164(Y - 16) - 0.813(V - 128) - 0.391(U - 128) */
+ g = 0x012b27 * y - 0x00d0f2 * v - 0x00647e * u;
+ /* B = 1.164(Y - 16) + 2.018(U - 128) */
+ b = 0x012b27 * y + 0x0206a2 * u;
+
+ *buffer++ = 0xff000000 |
+ (r >= 0 ? r < 0x1000000 ? r & 0xff0000 : 0xff0000 : 0) |
+ (g >= 0 ? g < 0x1000000 ? (g >> 8) & 0x00ff00 : 0x00ff00 : 0) |
+ (b >= 0 ? b < 0x1000000 ? (b >> 16) & 0x0000ff : 0x0000ff : 0);
+ }
+}
+
+/**************************** Pixel wise fetching *****************************/
+
+/* Despite the type, expects a uint64_t buffer */
+static uint64_t
+fetch_pixel_a2r10g10b10 (bits_image_t *image,
+ int offset,
+ int line)
+{
+ uint32_t *bits = image->bits + line * image->rowstride;
+ uint32_t p = READ (image, bits + offset);
+ uint64_t a = p >> 30;
+ uint64_t r = (p >> 20) & 0x3ff;
+ uint64_t g = (p >> 10) & 0x3ff;
+ uint64_t b = p & 0x3ff;
+
+ r = r << 6 | r >> 4;
+ g = g << 6 | g >> 4;
+ b = b << 6 | b >> 4;
+
+ a <<= 14;
+ a |= a >> 2;
+ a |= a >> 4;
+ a |= a >> 8;
+
+ return a << 48 | r << 32 | g << 16 | b;
+}
+
+/* Despite the type, this function expects a uint64_t buffer */
+static uint64_t
+fetch_pixel_x2r10g10b10 (bits_image_t *image,
+ int offset,
+ int line)
+{
+ uint32_t *bits = image->bits + line * image->rowstride;
+ uint32_t p = READ (image, bits + offset);
+ uint64_t r = (p >> 20) & 0x3ff;
+ uint64_t g = (p >> 10) & 0x3ff;
+ uint64_t b = p & 0x3ff;
+
+ r = r << 6 | r >> 4;
+ g = g << 6 | g >> 4;
+ b = b << 6 | b >> 4;
+
+ return 0xffffULL << 48 | r << 32 | g << 16 | b;
+}
+
+/* Despite the type, expects a uint64_t buffer */
+static uint64_t
+fetch_pixel_a2b10g10r10 (bits_image_t *image,
+ int offset,
+ int line)
+{
+ uint32_t *bits = image->bits + line * image->rowstride;
+ uint32_t p = READ (image, bits + offset);
+ uint64_t a = p >> 30;
+ uint64_t b = (p >> 20) & 0x3ff;
+ uint64_t g = (p >> 10) & 0x3ff;
+ uint64_t r = p & 0x3ff;
+
+ r = r << 6 | r >> 4;
+ g = g << 6 | g >> 4;
+ b = b << 6 | b >> 4;
+
+ a <<= 14;
+ a |= a >> 2;
+ a |= a >> 4;
+ a |= a >> 8;
+
+ return a << 48 | r << 32 | g << 16 | b;
+}
+
+/* Despite the type, this function expects a uint64_t buffer */
+static uint64_t
+fetch_pixel_x2b10g10r10 (bits_image_t *image,
+ int offset,
+ int line)
+{
+ uint32_t *bits = image->bits + line * image->rowstride;
+ uint32_t p = READ (image, bits + offset);
+ uint64_t b = (p >> 20) & 0x3ff;
+ uint64_t g = (p >> 10) & 0x3ff;
+ uint64_t r = p & 0x3ff;
+
+ r = r << 6 | r >> 4;
+ g = g << 6 | g >> 4;
+ b = b << 6 | b >> 4;
+
+ return 0xffffULL << 48 | r << 32 | g << 16 | b;
+}
+
+static uint32_t
+fetch_pixel_a8r8g8b8 (bits_image_t *image,
+ int offset,
+ int line)
+{
+ uint32_t *bits = image->bits + line * image->rowstride;
+ return READ (image, (uint32_t *)bits + offset);
+}
+
+static uint32_t
+fetch_pixel_x8r8g8b8 (bits_image_t *image,
+ int offset,
+ int line)
+{
+ uint32_t *bits = image->bits + line * image->rowstride;
+
+ return READ (image, (uint32_t *)bits + offset) | 0xff000000;
+}
+
+static uint32_t
+fetch_pixel_a8b8g8r8 (bits_image_t *image,
+ int offset,
+ int line)
+{
+ uint32_t *bits = image->bits + line * image->rowstride;
+ uint32_t pixel = READ (image, (uint32_t *)bits + offset);
+
+ return ((pixel & 0xff000000) |
+ ((pixel >> 16) & 0xff) |
+ (pixel & 0x0000ff00) |
+ ((pixel & 0xff) << 16));
+}
+
+static uint32_t
+fetch_pixel_x8b8g8r8 (bits_image_t *image,
+ int offset,
+ int line)
+{
+ uint32_t *bits = image->bits + line * image->rowstride;
+ uint32_t pixel = READ (image, (uint32_t *)bits + offset);
+
+ return ((0xff000000) |
+ ((pixel >> 16) & 0xff) |
+ (pixel & 0x0000ff00) |
+ ((pixel & 0xff) << 16));
+}
+
+static uint32_t
+fetch_pixel_b8g8r8a8 (bits_image_t *image,
+ int offset,
+ int line)
+{
+ uint32_t *bits = image->bits + line * image->rowstride;
+ uint32_t pixel = READ (image, (uint32_t *)bits + offset);
+
+ return ((pixel & 0xff000000) >> 24 |
+ (pixel & 0x00ff0000) >> 8 |
+ (pixel & 0x0000ff00) << 8 |
+ (pixel & 0x000000ff) << 24);
+}
+
+static uint32_t
+fetch_pixel_b8g8r8x8 (bits_image_t *image,
+ int offset,
+ int line)
+{
+ uint32_t *bits = image->bits + line * image->rowstride;
+ uint32_t pixel = READ (image, (uint32_t *)bits + offset);
+
+ return ((0xff000000) |
+ (pixel & 0xff000000) >> 24 |
+ (pixel & 0x00ff0000) >> 8 |
+ (pixel & 0x0000ff00) << 8);
+}
+
+static uint32_t
+fetch_pixel_x14r6g6b6 (bits_image_t *image,
+ int offset,
+ int line)
+{
+ uint32_t *bits = image->bits + line * image->rowstride;
+ uint32_t pixel = READ (image, (uint32_t *) bits + offset);
+ uint32_t r, g, b;
+
+ r = ((pixel & 0x3f000) << 6) | ((pixel & 0x30000));
+ g = ((pixel & 0x00fc0) << 4) | ((pixel & 0x00c00) >> 2);
+ b = ((pixel & 0x0003f) << 2) | ((pixel & 0x00030) >> 4);
+
+ return 0xff000000 | r | g | b;
+}
+
+static uint32_t
+fetch_pixel_r8g8b8 (bits_image_t *image,
+ int offset,
+ int line)
+{
+ uint32_t *bits = image->bits + line * image->rowstride;
+ uint8_t *pixel = ((uint8_t *) bits) + (offset * 3);
+
+#ifdef WORDS_BIGENDIAN
+ return (0xff000000 |
+ (READ (image, pixel + 0) << 16) |
+ (READ (image, pixel + 1) << 8) |
+ (READ (image, pixel + 2)));
+#else
+ return (0xff000000 |
+ (READ (image, pixel + 2) << 16) |
+ (READ (image, pixel + 1) << 8) |
+ (READ (image, pixel + 0)));
+#endif
+}
+
+static uint32_t
+fetch_pixel_b8g8r8 (bits_image_t *image,
+ int offset,
+ int line)
+{
+ uint32_t *bits = image->bits + line * image->rowstride;
+ uint8_t *pixel = ((uint8_t *) bits) + (offset * 3);
+#ifdef WORDS_BIGENDIAN
+ return (0xff000000 |
+ (READ (image, pixel + 2) << 16) |
+ (READ (image, pixel + 1) << 8) |
+ (READ (image, pixel + 0)));
+#else
+ return (0xff000000 |
+ (READ (image, pixel + 0) << 16) |
+ (READ (image, pixel + 1) << 8) |
+ (READ (image, pixel + 2)));
+#endif
+}
+
+static uint32_t
+fetch_pixel_r5g6b5 (bits_image_t *image,
+ int offset,
+ int line)
+{
+ uint32_t *bits = image->bits + line * image->rowstride;
+ uint32_t pixel = READ (image, (uint16_t *) bits + offset);
+ uint32_t r, g, b;
+
+ r = ((pixel & 0xf800) | ((pixel & 0xe000) >> 5)) << 8;
+ g = ((pixel & 0x07e0) | ((pixel & 0x0600) >> 6)) << 5;
+ b = ((pixel & 0x001c) | ((pixel & 0x001f) << 5)) >> 2;
+
+ return (0xff000000 | r | g | b);
+}
+
+static uint32_t
+fetch_pixel_b5g6r5 (bits_image_t *image,
+ int offset,
+ int line)
+{
+ uint32_t r, g, b;
+ uint32_t *bits = image->bits + line * image->rowstride;
+ uint32_t pixel = READ (image, (uint16_t *) bits + offset);
+
+ b = ((pixel & 0xf800) | ((pixel & 0xe000) >> 5)) >> 8;
+ g = ((pixel & 0x07e0) | ((pixel & 0x0600) >> 6)) << 5;
+ r = ((pixel & 0x001c) | ((pixel & 0x001f) << 5)) << 14;
+
+ return (0xff000000 | r | g | b);
+}
+
+static uint32_t
+fetch_pixel_a1r5g5b5 (bits_image_t *image,
+ int offset,
+ int line)
+{
+ uint32_t *bits = image->bits + line * image->rowstride;
+ uint32_t pixel = READ (image, (uint16_t *) bits + offset);
+ uint32_t a, r, g, b;
+
+ a = (uint32_t) ((uint8_t) (0 - ((pixel & 0x8000) >> 15))) << 24;
+ r = ((pixel & 0x7c00) | ((pixel & 0x7000) >> 5)) << 9;
+ g = ((pixel & 0x03e0) | ((pixel & 0x0380) >> 5)) << 6;
+ b = ((pixel & 0x001c) | ((pixel & 0x001f) << 5)) >> 2;
+
+ return (a | r | g | b);
+}
+
+static uint32_t
+fetch_pixel_x1r5g5b5 (bits_image_t *image,
+ int offset,
+ int line)
+{
+ uint32_t *bits = image->bits + line * image->rowstride;
+ uint32_t pixel = READ (image, (uint16_t *) bits + offset);
+ uint32_t r, g, b;
+
+ r = ((pixel & 0x7c00) | ((pixel & 0x7000) >> 5)) << 9;
+ g = ((pixel & 0x03e0) | ((pixel & 0x0380) >> 5)) << 6;
+ b = ((pixel & 0x001c) | ((pixel & 0x001f) << 5)) >> 2;
+
+ return (0xff000000 | r | g | b);
+}
+
+static uint32_t
+fetch_pixel_a1b5g5r5 (bits_image_t *image,
+ int offset,
+ int line)
+{
+ uint32_t *bits = image->bits + line * image->rowstride;
+ uint32_t pixel = READ (image, (uint16_t *) bits + offset);
+ uint32_t a, r, g, b;
+
+ a = (uint32_t) ((uint8_t) (0 - ((pixel & 0x8000) >> 15))) << 24;
+ b = ((pixel & 0x7c00) | ((pixel & 0x7000) >> 5)) >> 7;
+ g = ((pixel & 0x03e0) | ((pixel & 0x0380) >> 5)) << 6;
+ r = ((pixel & 0x001c) | ((pixel & 0x001f) << 5)) << 14;
+
+ return (a | r | g | b);
+}
+
+static uint32_t
+fetch_pixel_x1b5g5r5 (bits_image_t *image,
+ int offset,
+ int line)
+{
+ uint32_t *bits = image->bits + line * image->rowstride;
+ uint32_t pixel = READ (image, (uint16_t *) bits + offset);
+ uint32_t r, g, b;
+
+ b = ((pixel & 0x7c00) | ((pixel & 0x7000) >> 5)) >> 7;
+ g = ((pixel & 0x03e0) | ((pixel & 0x0380) >> 5)) << 6;
+ r = ((pixel & 0x001c) | ((pixel & 0x001f) << 5)) << 14;
+
+ return (0xff000000 | r | g | b);
+}
+
+static uint32_t
+fetch_pixel_a4r4g4b4 (bits_image_t *image,
+ int offset,
+ int line)
+{
+ uint32_t *bits = image->bits + line * image->rowstride;
+ uint32_t pixel = READ (image, (uint16_t *) bits + offset);
+ uint32_t a, r, g, b;
+
+ a = ((pixel & 0xf000) | ((pixel & 0xf000) >> 4)) << 16;
+ r = ((pixel & 0x0f00) | ((pixel & 0x0f00) >> 4)) << 12;
+ g = ((pixel & 0x00f0) | ((pixel & 0x00f0) >> 4)) << 8;
+ b = ((pixel & 0x000f) | ((pixel & 0x000f) << 4));
+
+ return (a | r | g | b);
+}
+
+static uint32_t
+fetch_pixel_x4r4g4b4 (bits_image_t *image,
+ int offset,
+ int line)
+{
+ uint32_t *bits = image->bits + line * image->rowstride;
+ uint32_t pixel = READ (image, (uint16_t *) bits + offset);
+ uint32_t r, g, b;
+
+ r = ((pixel & 0x0f00) | ((pixel & 0x0f00) >> 4)) << 12;
+ g = ((pixel & 0x00f0) | ((pixel & 0x00f0) >> 4)) << 8;
+ b = ((pixel & 0x000f) | ((pixel & 0x000f) << 4));
+
+ return (0xff000000 | r | g | b);
+}
+
+static uint32_t
+fetch_pixel_a4b4g4r4 (bits_image_t *image,
+ int offset,
+ int line)
+{
+ uint32_t *bits = image->bits + line * image->rowstride;
+ uint32_t pixel = READ (image, (uint16_t *) bits + offset);
+ uint32_t a, r, g, b;
+
+ a = ((pixel & 0xf000) | ((pixel & 0xf000) >> 4)) << 16;
+ b = ((pixel & 0x0f00) | ((pixel & 0x0f00) >> 4)) >> 4;
+ g = ((pixel & 0x00f0) | ((pixel & 0x00f0) >> 4)) << 8;
+ r = ((pixel & 0x000f) | ((pixel & 0x000f) << 4)) << 16;
+
+ return (a | r | g | b);
+}
+
+static uint32_t
+fetch_pixel_x4b4g4r4 (bits_image_t *image,
+ int offset,
+ int line)
+{
+ uint32_t *bits = image->bits + line * image->rowstride;
+ uint32_t pixel = READ (image, (uint16_t *) bits + offset);
+ uint32_t r, g, b;
+
+ b = ((pixel & 0x0f00) | ((pixel & 0x0f00) >> 4)) >> 4;
+ g = ((pixel & 0x00f0) | ((pixel & 0x00f0) >> 4)) << 8;
+ r = ((pixel & 0x000f) | ((pixel & 0x000f) << 4)) << 16;
+
+ return (0xff000000 | r | g | b);
+}
+
+static uint32_t
+fetch_pixel_a8 (bits_image_t *image,
+ int offset,
+ int line)
+{
+ uint32_t *bits = image->bits + line * image->rowstride;
+ uint32_t pixel = READ (image, (uint8_t *) bits + offset);
+
+ return pixel << 24;
+}
+
+static uint32_t
+fetch_pixel_r3g3b2 (bits_image_t *image,
+ int offset,
+ int line)
+{
+ uint32_t *bits = image->bits + line * image->rowstride;
+ uint32_t pixel = READ (image, (uint8_t *) bits + offset);
+ uint32_t r, g, b;
+
+ r = ((pixel & 0xe0) |
+ ((pixel & 0xe0) >> 3) |
+ ((pixel & 0xc0) >> 6)) << 16;
+
+ g = ((pixel & 0x1c) |
+ ((pixel & 0x18) >> 3) |
+ ((pixel & 0x1c) << 3)) << 8;
+
+ b = (((pixel & 0x03) ) |
+ ((pixel & 0x03) << 2) |
+ ((pixel & 0x03) << 4) |
+ ((pixel & 0x03) << 6));
+
+ return (0xff000000 | r | g | b);
+}
+
+static uint32_t
+fetch_pixel_b2g3r3 (bits_image_t *image,
+ int offset,
+ int line)
+{
+ uint32_t *bits = image->bits + line * image->rowstride;
+ uint32_t p = READ (image, (uint8_t *) bits + offset);
+ uint32_t r, g, b;
+
+ b = p & 0xc0;
+ b |= b >> 2;
+ b |= b >> 4;
+ b &= 0xff;
+
+ g = (p & 0x38) << 10;
+ g |= g >> 3;
+ g |= g >> 6;
+ g &= 0xff00;
+
+ r = (p & 0x7) << 21;
+ r |= r >> 3;
+ r |= r >> 6;
+ r &= 0xff0000;
+
+ return 0xff000000 | r | g | b;
+}
+
+static uint32_t
+fetch_pixel_a2r2g2b2 (bits_image_t *image,
+ int offset,
+ int line)
+{
+ uint32_t *bits = image->bits + line * image->rowstride;
+ uint32_t pixel = READ (image, (uint8_t *) bits + offset);
+ uint32_t a, r, g, b;
+
+ a = ((pixel & 0xc0) * 0x55) << 18;
+ r = ((pixel & 0x30) * 0x55) << 12;
+ g = ((pixel & 0x0c) * 0x55) << 6;
+ b = ((pixel & 0x03) * 0x55);
+
+ return a | r | g | b;
+}
+
+static uint32_t
+fetch_pixel_a2b2g2r2 (bits_image_t *image,
+ int offset,
+ int line)
+{
+ uint32_t *bits = image->bits + line * image->rowstride;
+ uint32_t pixel = READ (image, (uint8_t *) bits + offset);
+ uint32_t a, r, g, b;
+
+ a = ((pixel & 0xc0) * 0x55) << 18;
+ b = ((pixel & 0x30) * 0x55) >> 4;
+ g = ((pixel & 0x0c) * 0x55) << 6;
+ r = ((pixel & 0x03) * 0x55) << 16;
+
+ return a | r | g | b;
+}
+
+static uint32_t
+fetch_pixel_c8 (bits_image_t *image,
+ int offset,
+ int line)
+{
+ uint32_t *bits = image->bits + line * image->rowstride;
+ uint32_t pixel = READ (image, (uint8_t *) bits + offset);
+ const pixman_indexed_t * indexed = image->indexed;
+
+ return indexed->rgba[pixel];
+}
+
+static uint32_t
+fetch_pixel_x4a4 (bits_image_t *image,
+ int offset,
+ int line)
+{
+ uint32_t *bits = image->bits + line * image->rowstride;
+ uint32_t pixel = READ (image, (uint8_t *) bits + offset);
+
+ return ((pixel & 0xf) | ((pixel & 0xf) << 4)) << 24;
+}
+
+static uint32_t
+fetch_pixel_a4 (bits_image_t *image,
+ int offset,
+ int line)
+{
+ uint32_t *bits = image->bits + line * image->rowstride;
+ uint32_t pixel = FETCH_4 (image, bits, offset);
+
+ pixel |= pixel << 4;
+ return pixel << 24;
+}
+
+static uint32_t
+fetch_pixel_r1g2b1 (bits_image_t *image,
+ int offset,
+ int line)
+{
+ uint32_t *bits = image->bits + line * image->rowstride;
+ uint32_t pixel = FETCH_4 (image, bits, offset);
+ uint32_t r, g, b;
+
+ r = ((pixel & 0x8) * 0xff) << 13;
+ g = ((pixel & 0x6) * 0x55) << 7;
+ b = ((pixel & 0x1) * 0xff);
+
+ return 0xff000000 | r | g | b;
+}
+
+static uint32_t
+fetch_pixel_b1g2r1 (bits_image_t *image,
+ int offset,
+ int line)
+{
+ uint32_t *bits = image->bits + line * image->rowstride;
+ uint32_t pixel = FETCH_4 (image, bits, offset);
+ uint32_t r, g, b;
+
+ b = ((pixel & 0x8) * 0xff) >> 3;
+ g = ((pixel & 0x6) * 0x55) << 7;
+ r = ((pixel & 0x1) * 0xff) << 16;
+
+ return 0xff000000 | r | g | b;
+}
+
+static uint32_t
+fetch_pixel_a1r1g1b1 (bits_image_t *image,
+ int offset,
+ int line)
+{
+ uint32_t *bits = image->bits + line * image->rowstride;
+ uint32_t pixel = FETCH_4 (image, bits, offset);
+ uint32_t a, r, g, b;
+
+ a = ((pixel & 0x8) * 0xff) << 21;
+ r = ((pixel & 0x4) * 0xff) << 14;
+ g = ((pixel & 0x2) * 0xff) << 7;
+ b = ((pixel & 0x1) * 0xff);
+
+ return a | r | g | b;
+}
+
+static uint32_t
+fetch_pixel_a1b1g1r1 (bits_image_t *image,
+ int offset,
+ int line)
+{
+ uint32_t *bits = image->bits + line * image->rowstride;
+ uint32_t pixel = FETCH_4 (image, bits, offset);
+ uint32_t a, r, g, b;
+
+ a = ((pixel & 0x8) * 0xff) << 21;
+ b = ((pixel & 0x4) * 0xff) >> 2;
+ g = ((pixel & 0x2) * 0xff) << 7;
+ r = ((pixel & 0x1) * 0xff) << 16;
+
+ return a | r | g | b;
+}
+
+static uint32_t
+fetch_pixel_c4 (bits_image_t *image,
+ int offset,
+ int line)
+{
+ uint32_t *bits = image->bits + line * image->rowstride;
+ uint32_t pixel = FETCH_4 (image, bits, offset);
+ const pixman_indexed_t * indexed = image->indexed;
+
+ return indexed->rgba[pixel];
+}
+
+static uint32_t
+fetch_pixel_a1 (bits_image_t *image,
+ int offset,
+ int line)
+{
+ uint32_t *bits = image->bits + line * image->rowstride;
+ uint32_t pixel = READ (image, bits + (offset >> 5));
+ uint32_t a;
+
+#ifdef WORDS_BIGENDIAN
+ a = pixel >> (0x1f - (offset & 0x1f));
+#else
+ a = pixel >> (offset & 0x1f);
+#endif
+ a = a & 1;
+ a |= a << 1;
+ a |= a << 2;
+ a |= a << 4;
+
+ return a << 24;
+}
+
+static uint32_t
+fetch_pixel_g1 (bits_image_t *image,
+ int offset,
+ int line)
+{
+ uint32_t *bits = image->bits + line * image->rowstride;
+ uint32_t pixel = READ (image, bits + (offset >> 5));
+ const pixman_indexed_t * indexed = image->indexed;
+ uint32_t a;
+
+#ifdef WORDS_BIGENDIAN
+ a = pixel >> (0x1f - (offset & 0x1f));
+#else
+ a = pixel >> (offset & 0x1f);
+#endif
+ a = a & 1;
+
+ return indexed->rgba[a];
+}
+
+static uint32_t
+fetch_pixel_yuy2 (bits_image_t *image,
+ int offset,
+ int line)
+{
+ const uint32_t *bits = image->bits + image->rowstride * line;
+
+ int16_t y, u, v;
+ int32_t r, g, b;
+
+ y = ((uint8_t *) bits)[offset << 1] - 16;
+ u = ((uint8_t *) bits)[((offset << 1) & - 4) + 1] - 128;
+ v = ((uint8_t *) bits)[((offset << 1) & - 4) + 3] - 128;
+
+ /* R = 1.164(Y - 16) + 1.596(V - 128) */
+ r = 0x012b27 * y + 0x019a2e * v;
+
+ /* G = 1.164(Y - 16) - 0.813(V - 128) - 0.391(U - 128) */
+ g = 0x012b27 * y - 0x00d0f2 * v - 0x00647e * u;
+
+ /* B = 1.164(Y - 16) + 2.018(U - 128) */
+ b = 0x012b27 * y + 0x0206a2 * u;
+
+ return 0xff000000 |
+ (r >= 0 ? r < 0x1000000 ? r & 0xff0000 : 0xff0000 : 0) |
+ (g >= 0 ? g < 0x1000000 ? (g >> 8) & 0x00ff00 : 0x00ff00 : 0) |
+ (b >= 0 ? b < 0x1000000 ? (b >> 16) & 0x0000ff : 0x0000ff : 0);
+}
+
+static uint32_t
+fetch_pixel_yv12 (bits_image_t *image,
+ int offset,
+ int line)
+{
+ YV12_SETUP (image);
+ int16_t y = YV12_Y (line)[offset] - 16;
+ int16_t u = YV12_U (line)[offset >> 1] - 128;
+ int16_t v = YV12_V (line)[offset >> 1] - 128;
+ int32_t r, g, b;
+
+ /* R = 1.164(Y - 16) + 1.596(V - 128) */
+ r = 0x012b27 * y + 0x019a2e * v;
+
+ /* G = 1.164(Y - 16) - 0.813(V - 128) - 0.391(U - 128) */
+ g = 0x012b27 * y - 0x00d0f2 * v - 0x00647e * u;
+
+ /* B = 1.164(Y - 16) + 2.018(U - 128) */
+ b = 0x012b27 * y + 0x0206a2 * u;
+
+ return 0xff000000 |
+ (r >= 0 ? r < 0x1000000 ? r & 0xff0000 : 0xff0000 : 0) |
+ (g >= 0 ? g < 0x1000000 ? (g >> 8) & 0x00ff00 : 0x00ff00 : 0) |
+ (b >= 0 ? b < 0x1000000 ? (b >> 16) & 0x0000ff : 0x0000ff : 0);
+}
+
+/*********************************** Store ************************************/
+
+#define SPLIT_A(v) \
+ uint32_t a = ((v) >> 24), \
+ r = ((v) >> 16) & 0xff, \
+ g = ((v) >> 8) & 0xff, \
+ b = (v) & 0xff
+
+#define SPLIT(v) \
+ uint32_t r = ((v) >> 16) & 0xff, \
+ g = ((v) >> 8) & 0xff, \
+ b = (v) & 0xff
+
+static void
+store_scanline_a2r10g10b10 (bits_image_t * image,
+ int x,
+ int y,
+ int width,
+ const uint32_t *v)
+{
+ uint32_t *bits = image->bits + image->rowstride * y;
+ uint32_t *pixel = bits + x;
+ uint64_t *values = (uint64_t *)v;
+ int i;
+
+ for (i = 0; i < width; ++i)
+ {
+ WRITE (image, pixel++,
+ ((values[i] >> 32) & 0xc0000000) |
+ ((values[i] >> 18) & 0x3ff00000) |
+ ((values[i] >> 12) & 0xffc00) |
+ ((values[i] >> 6) & 0x3ff));
+ }
+}
+
+static void
+store_scanline_x2r10g10b10 (bits_image_t * image,
+ int x,
+ int y,
+ int width,
+ const uint32_t *v)
+{
+ uint32_t *bits = image->bits + image->rowstride * y;
+ uint64_t *values = (uint64_t *)v;
+ uint32_t *pixel = bits + x;
+ int i;
+
+ for (i = 0; i < width; ++i)
+ {
+ WRITE (image, pixel++,
+ ((values[i] >> 18) & 0x3ff00000) |
+ ((values[i] >> 12) & 0xffc00) |
+ ((values[i] >> 6) & 0x3ff));
+ }
+}
+
+static void
+store_scanline_a2b10g10r10 (bits_image_t * image,
+ int x,
+ int y,
+ int width,
+ const uint32_t *v)
+{
+ uint32_t *bits = image->bits + image->rowstride * y;
+ uint32_t *pixel = bits + x;
+ uint64_t *values = (uint64_t *)v;
+ int i;
+
+ for (i = 0; i < width; ++i)
+ {
+ WRITE (image, pixel++,
+ ((values[i] >> 32) & 0xc0000000) |
+ ((values[i] >> 38) & 0x3ff) |
+ ((values[i] >> 12) & 0xffc00) |
+ ((values[i] << 14) & 0x3ff00000));
+ }
+}
+
+static void
+store_scanline_x2b10g10r10 (bits_image_t * image,
+ int x,
+ int y,
+ int width,
+ const uint32_t *v)
+{
+ uint32_t *bits = image->bits + image->rowstride * y;
+ uint64_t *values = (uint64_t *)v;
+ uint32_t *pixel = bits + x;
+ int i;
+
+ for (i = 0; i < width; ++i)
+ {
+ WRITE (image, pixel++,
+ ((values[i] >> 38) & 0x3ff) |
+ ((values[i] >> 12) & 0xffc00) |
+ ((values[i] << 14) & 0x3ff00000));
+ }
+}
+
+static void
+store_scanline_a8r8g8b8 (bits_image_t * image,
+ int x,
+ int y,
+ int width,
+ const uint32_t *values)
+{
+ uint32_t *bits = image->bits + image->rowstride * y;
+
+ MEMCPY_WRAPPED (image, ((uint32_t *)bits) + x, values,
+ width * sizeof(uint32_t));
+}
+
+static void
+store_scanline_x8r8g8b8 (bits_image_t * image,
+ int x,
+ int y,
+ int width,
+ const uint32_t *values)
+{
+ uint32_t *bits = image->bits + image->rowstride * y;
+ uint32_t *pixel = (uint32_t *)bits + x;
+ int i;
+
+ for (i = 0; i < width; ++i)
+ WRITE (image, pixel++, values[i] & 0xffffff);
+}
+
+static void
+store_scanline_a8b8g8r8 (bits_image_t * image,
+ int x,
+ int y,
+ int width,
+ const uint32_t *values)
+{
+ uint32_t *bits = image->bits + image->rowstride * y;
+ uint32_t *pixel = (uint32_t *)bits + x;
+ int i;
+
+ for (i = 0; i < width; ++i)
+ {
+ WRITE (image, pixel++,
+ (values[i] & 0xff00ff00) |
+ ((values[i] >> 16) & 0xff) |
+ ((values[i] & 0xff) << 16));
+ }
+}
+
+static void
+store_scanline_x8b8g8r8 (bits_image_t * image,
+ int x,
+ int y,
+ int width,
+ const uint32_t *values)
+{
+ uint32_t *bits = image->bits + image->rowstride * y;
+ uint32_t *pixel = (uint32_t *)bits + x;
+ int i;
+
+ for (i = 0; i < width; ++i)
+ {
+ WRITE (image, pixel++,
+ (values[i] & 0x0000ff00) |
+ ((values[i] >> 16) & 0xff) |
+ ((values[i] & 0xff) << 16));
+ }
+}
+
+static void
+store_scanline_b8g8r8a8 (bits_image_t * image,
+ int x,
+ int y,
+ int width,
+ const uint32_t *values)
+{
+ uint32_t *bits = image->bits + image->rowstride * y;
+ uint32_t *pixel = (uint32_t *)bits + x;
+ int i;
+
+ for (i = 0; i < width; ++i)
+ {
+ WRITE (image, pixel++,
+ ((values[i] >> 24) & 0x000000ff) |
+ ((values[i] >> 8) & 0x0000ff00) |
+ ((values[i] << 8) & 0x00ff0000) |
+ ((values[i] << 24) & 0xff000000));
+ }
+}
+
+static void
+store_scanline_b8g8r8x8 (bits_image_t * image,
+ int x,
+ int y,
+ int width,
+ const uint32_t *values)
+{
+ uint32_t *bits = image->bits + image->rowstride * y;
+ uint32_t *pixel = (uint32_t *)bits + x;
+ int i;
+
+ for (i = 0; i < width; ++i)
+ {
+ WRITE (image, pixel++,
+ ((values[i] >> 8) & 0x0000ff00) |
+ ((values[i] << 8) & 0x00ff0000) |
+ ((values[i] << 24) & 0xff000000));
+ }
+}
+
+static void
+store_scanline_x14r6g6b6 (bits_image_t * image,
+ int x,
+ int y,
+ int width,
+ const uint32_t *values)
+{
+ uint32_t *bits = image->bits + image->rowstride * y;
+ uint32_t *pixel = ((uint32_t *) bits) + x;
+ int i;
+
+ for (i = 0; i < width; ++i)
+ {
+ uint32_t s = values[i];
+ uint32_t r, g, b;
+
+ r = (s & 0xfc0000) >> 6;
+ g = (s & 0x00fc00) >> 4;
+ b = (s & 0x0000fc) >> 2;
+
+ WRITE (image, pixel++, r | g | b);
+ }
+}
+
+static void
+store_scanline_r8g8b8 (bits_image_t * image,
+ int x,
+ int y,
+ int width,
+ const uint32_t *values)
+{
+ uint32_t *bits = image->bits + image->rowstride * y;
+ uint8_t *pixel = ((uint8_t *) bits) + 3 * x;
+ int i;
+
+ for (i = 0; i < width; ++i)
+ {
+ uint32_t val = values[i];
+
+#ifdef WORDS_BIGENDIAN
+ WRITE (image, pixel++, (val & 0x00ff0000) >> 16);
+ WRITE (image, pixel++, (val & 0x0000ff00) >> 8);
+ WRITE (image, pixel++, (val & 0x000000ff) >> 0);
+#else
+ WRITE (image, pixel++, (val & 0x000000ff) >> 0);
+ WRITE (image, pixel++, (val & 0x0000ff00) >> 8);
+ WRITE (image, pixel++, (val & 0x00ff0000) >> 16);
+#endif
+ }
+}
+
+static void
+store_scanline_b8g8r8 (bits_image_t * image,
+ int x,
+ int y,
+ int width,
+ const uint32_t *values)
+{
+ uint32_t *bits = image->bits + image->rowstride * y;
+ uint8_t *pixel = ((uint8_t *) bits) + 3 * x;
+ int i;
+
+ for (i = 0; i < width; ++i)
+ {
+ uint32_t val = values[i];
+
+#ifdef WORDS_BIGENDIAN
+ WRITE (image, pixel++, (val & 0x000000ff) >> 0);
+ WRITE (image, pixel++, (val & 0x0000ff00) >> 8);
+ WRITE (image, pixel++, (val & 0x00ff0000) >> 16);
+#else
+ WRITE (image, pixel++, (val & 0x00ff0000) >> 16);
+ WRITE (image, pixel++, (val & 0x0000ff00) >> 8);
+ WRITE (image, pixel++, (val & 0x000000ff) >> 0);
+#endif
+ }
+}
+
+static void
+store_scanline_r5g6b5 (bits_image_t * image,
+ int x,
+ int y,
+ int width,
+ const uint32_t *values)
+{
+ uint32_t *bits = image->bits + image->rowstride * y;
+ uint16_t *pixel = ((uint16_t *) bits) + x;
+ int i;
+
+ for (i = 0; i < width; ++i)
+ {
+ uint32_t s = values[i];
+
+ WRITE (image, pixel++,
+ ((s >> 3) & 0x001f) |
+ ((s >> 5) & 0x07e0) |
+ ((s >> 8) & 0xf800));
+ }
+}
+
+static void
+store_scanline_b5g6r5 (bits_image_t * image,
+ int x,
+ int y,
+ int width,
+ const uint32_t *values)
+{
+ uint32_t *bits = image->bits + image->rowstride * y;
+ uint16_t *pixel = ((uint16_t *) bits) + x;
+ int i;
+
+ for (i = 0; i < width; ++i)
+ {
+ SPLIT (values[i]);
+
+ WRITE (image, pixel++,
+ ((b << 8) & 0xf800) |
+ ((g << 3) & 0x07e0) |
+ ((r >> 3) ));
+ }
+}
+
+static void
+store_scanline_a1r5g5b5 (bits_image_t * image,
+ int x,
+ int y,
+ int width,
+ const uint32_t *values)
+{
+ uint32_t *bits = image->bits + image->rowstride * y;
+ uint16_t *pixel = ((uint16_t *) bits) + x;
+ int i;
+
+ for (i = 0; i < width; ++i)
+ {
+ SPLIT_A (values[i]);
+
+ WRITE (image, pixel++,
+ ((a << 8) & 0x8000) |
+ ((r << 7) & 0x7c00) |
+ ((g << 2) & 0x03e0) |
+ ((b >> 3) ));
+ }
+}
+
+static void
+store_scanline_x1r5g5b5 (bits_image_t * image,
+ int x,
+ int y,
+ int width,
+ const uint32_t *values)
+{
+ uint32_t *bits = image->bits + image->rowstride * y;
+ uint16_t *pixel = ((uint16_t *) bits) + x;
+ int i;
+
+ for (i = 0; i < width; ++i)
+ {
+ SPLIT (values[i]);
+
+ WRITE (image, pixel++,
+ ((r << 7) & 0x7c00) |
+ ((g << 2) & 0x03e0) |
+ ((b >> 3) ));
+ }
+}
+
+static void
+store_scanline_a1b5g5r5 (bits_image_t * image,
+ int x,
+ int y,
+ int width,
+ const uint32_t *values)
+{
+ uint32_t *bits = image->bits + image->rowstride * y;
+ uint16_t *pixel = ((uint16_t *) bits) + x;
+ int i;
+
+ for (i = 0; i < width; ++i)
+ {
+ SPLIT_A (values[i]);
+
+ WRITE (image, pixel++,
+ ((a << 8) & 0x8000) |
+ ((b << 7) & 0x7c00) |
+ ((g << 2) & 0x03e0) |
+ ((r >> 3) ));
+ }
+}
+
+static void
+store_scanline_x1b5g5r5 (bits_image_t * image,
+ int x,
+ int y,
+ int width,
+ const uint32_t *values)
+{
+ uint32_t *bits = image->bits + image->rowstride * y;
+ uint16_t *pixel = ((uint16_t *) bits) + x;
+ int i;
+
+ for (i = 0; i < width; ++i)
+ {
+ SPLIT (values[i]);
+
+ WRITE (image, pixel++, ((b << 7) & 0x7c00) |
+ ((g << 2) & 0x03e0) |
+ ((r >> 3) ));
+ }
+}
+
+static void
+store_scanline_a4r4g4b4 (bits_image_t * image,
+ int x,
+ int y,
+ int width,
+ const uint32_t *values)
+{
+ uint32_t *bits = image->bits + image->rowstride * y;
+ uint16_t *pixel = ((uint16_t *) bits) + x;
+ int i;
+
+ for (i = 0; i < width; ++i)
+ {
+ SPLIT_A (values[i]);
+
+ WRITE (image, pixel++,
+ ((a << 8) & 0xf000) |
+ ((r << 4) & 0x0f00) |
+ ((g ) & 0x00f0) |
+ ((b >> 4) ));
+ }
+}
+
+static void
+store_scanline_x4r4g4b4 (bits_image_t * image,
+ int x,
+ int y,
+ int width,
+ const uint32_t *values)
+{
+ uint32_t *bits = image->bits + image->rowstride * y;
+ uint16_t *pixel = ((uint16_t *) bits) + x;
+ int i;
+
+ for (i = 0; i < width; ++i)
+ {
+ SPLIT (values[i]);
+
+ WRITE (image, pixel++,
+ ((r << 4) & 0x0f00) |
+ ((g ) & 0x00f0) |
+ ((b >> 4) ));
+ }
+}
+
+static void
+store_scanline_a4b4g4r4 (bits_image_t * image,
+ int x,
+ int y,
+ int width,
+ const uint32_t *values)
+{
+ uint32_t *bits = image->bits + image->rowstride * y;
+ uint16_t *pixel = ((uint16_t *) bits) + x;
+ int i;
+
+ for (i = 0; i < width; ++i)
+ {
+ SPLIT_A (values[i]);
+ WRITE (image, pixel++, ((a << 8) & 0xf000) |
+ ((b << 4) & 0x0f00) |
+ ((g ) & 0x00f0) |
+ ((r >> 4) ));
+ }
+}
+
+static void
+store_scanline_x4b4g4r4 (bits_image_t * image,
+ int x,
+ int y,
+ int width,
+ const uint32_t *values)
+{
+ uint32_t *bits = image->bits + image->rowstride * y;
+ uint16_t *pixel = ((uint16_t *) bits) + x;
+ int i;
+
+ for (i = 0; i < width; ++i)
+ {
+ SPLIT (values[i]);
+
+ WRITE (image, pixel++,
+ ((b << 4) & 0x0f00) |
+ ((g ) & 0x00f0) |
+ ((r >> 4) ));
+ }
+}
+
+static void
+store_scanline_a8 (bits_image_t * image,
+ int x,
+ int y,
+ int width,
+ const uint32_t *values)
+{
+ uint32_t *bits = image->bits + image->rowstride * y;
+ uint8_t *pixel = ((uint8_t *) bits) + x;
+ int i;
+
+ for (i = 0; i < width; ++i)
+ {
+ WRITE (image, pixel++, values[i] >> 24);
+ }
+}
+
+static void
+store_scanline_r3g3b2 (bits_image_t * image,
+ int x,
+ int y,
+ int width,
+ const uint32_t *values)
+{
+ uint32_t *bits = image->bits + image->rowstride * y;
+ uint8_t *pixel = ((uint8_t *) bits) + x;
+ int i;
+
+ for (i = 0; i < width; ++i)
+ {
+ SPLIT (values[i]);
+
+ WRITE (image, pixel++,
+ ((r ) & 0xe0) |
+ ((g >> 3) & 0x1c) |
+ ((b >> 6) ));
+ }
+}
+
+static void
+store_scanline_b2g3r3 (bits_image_t * image,
+ int x,
+ int y,
+ int width,
+ const uint32_t *values)
+{
+ uint32_t *bits = image->bits + image->rowstride * y;
+ uint8_t *pixel = ((uint8_t *) bits) + x;
+ int i;
+
+ for (i = 0; i < width; ++i)
+ {
+ SPLIT (values[i]);
+
+ WRITE (image, pixel++,
+ ((b ) & 0xc0) |
+ ((g >> 2) & 0x38) |
+ ((r >> 5) ));
+ }
+}
+
+static void
+store_scanline_a2r2g2b2 (bits_image_t * image,
+ int x,
+ int y,
+ int width,
+ const uint32_t *values)
+{
+ uint32_t *bits = image->bits + image->rowstride * y;
+ uint8_t *pixel = ((uint8_t *) bits) + x;
+ int i;
+
+ for (i = 0; i < width; ++i)
+ {
+ SPLIT_A (values[i]);
+
+ WRITE (image, pixel++,
+ ((a ) & 0xc0) |
+ ((r >> 2) & 0x30) |
+ ((g >> 4) & 0x0c) |
+ ((b >> 6) ));
+ }
+}
+
+static void
+store_scanline_a2b2g2r2 (bits_image_t * image,
+ int x,
+ int y,
+ int width,
+ const uint32_t *values)
+{
+ uint32_t *bits = image->bits + image->rowstride * y;
+ uint8_t *pixel = ((uint8_t *) bits) + x;
+ int i;
+
+ for (i = 0; i < width; ++i)
+ {
+ SPLIT_A (values[i]);
+
+ *(pixel++) =
+ ((a ) & 0xc0) |
+ ((b >> 2) & 0x30) |
+ ((g >> 4) & 0x0c) |
+ ((r >> 6) );
+ }
+}
+
+static void
+store_scanline_c8 (bits_image_t * image,
+ int x,
+ int y,
+ int width,
+ const uint32_t *values)
+{
+ uint32_t *bits = image->bits + image->rowstride * y;
+ uint8_t *pixel = ((uint8_t *) bits) + x;
+ const pixman_indexed_t *indexed = image->indexed;
+ int i;
+
+ for (i = 0; i < width; ++i)
+ WRITE (image, pixel++, RGB24_TO_ENTRY (indexed,values[i]));
+}
+
+static void
+store_scanline_g8 (bits_image_t * image,
+ int x,
+ int y,
+ int width,
+ const uint32_t *values)
+{
+ uint32_t *bits = image->bits + image->rowstride * y;
+ uint8_t *pixel = ((uint8_t *) bits) + x;
+ const pixman_indexed_t *indexed = image->indexed;
+ int i;
+
+ for (i = 0; i < width; ++i)
+ WRITE (image, pixel++, RGB24_TO_ENTRY_Y (indexed,values[i]));
+}
+
+static void
+store_scanline_x4a4 (bits_image_t * image,
+ int x,
+ int y,
+ int width,
+ const uint32_t *values)
+{
+ uint32_t *bits = image->bits + image->rowstride * y;
+ uint8_t *pixel = ((uint8_t *) bits) + x;
+ int i;
+
+ for (i = 0; i < width; ++i)
+ WRITE (image, pixel++, values[i] >> 28);
+}
+
+#define STORE_8(img,l,o,v) (WRITE (img, (uint8_t *)(l) + ((o) >> 3), (v)))
+#ifdef WORDS_BIGENDIAN
+
+#define STORE_4(img,l,o,v) \
+ do \
+ { \
+ int bo = 4 * (o); \
+ int v4 = (v) & 0x0f; \
+ \
+ STORE_8 (img, l, bo, ( \
+ bo & 4 ? \
+ (FETCH_8 (img, l, bo) & 0xf0) | (v4) : \
+ (FETCH_8 (img, l, bo) & 0x0f) | (v4 << 4))); \
+ } while (0)
+#else
+
+#define STORE_4(img,l,o,v) \
+ do \
+ { \
+ int bo = 4 * (o); \
+ int v4 = (v) & 0x0f; \
+ \
+ STORE_8 (img, l, bo, ( \
+ bo & 4 ? \
+ (FETCH_8 (img, l, bo) & 0x0f) | (v4 << 4) : \
+ (FETCH_8 (img, l, bo) & 0xf0) | (v4))); \
+ } while (0)
+#endif
+
+static void
+store_scanline_a4 (bits_image_t * image,
+ int x,
+ int y,
+ int width,
+ const uint32_t *values)
+{
+ uint32_t *bits = image->bits + image->rowstride * y;
+ int i;
+
+ for (i = 0; i < width; ++i)
+ STORE_4 (image, bits, i + x, values[i] >> 28);
+}
+
+static void
+store_scanline_r1g2b1 (bits_image_t * image,
+ int x,
+ int y,
+ int width,
+ const uint32_t *values)
+{
+ uint32_t *bits = image->bits + image->rowstride * y;
+ int i;
+
+ for (i = 0; i < width; ++i)
+ {
+ uint32_t pixel;
+
+ SPLIT (values[i]);
+ pixel = (((r >> 4) & 0x8) |
+ ((g >> 5) & 0x6) |
+ ((b >> 7) ));
+ STORE_4 (image, bits, i + x, pixel);
+ }
+}
+
+static void
+store_scanline_b1g2r1 (bits_image_t * image,
+ int x,
+ int y,
+ int width,
+ const uint32_t *values)
+{
+ uint32_t *bits = image->bits + image->rowstride * y;
+ int i;
+
+ for (i = 0; i < width; ++i)
+ {
+ uint32_t pixel;
+
+ SPLIT (values[i]);
+ pixel = (((b >> 4) & 0x8) |
+ ((g >> 5) & 0x6) |
+ ((r >> 7) ));
+ STORE_4 (image, bits, i + x, pixel);
+ }
+}
+
+static void
+store_scanline_a1r1g1b1 (bits_image_t * image,
+ int x,
+ int y,
+ int width,
+ const uint32_t *values)
+{
+ uint32_t *bits = image->bits + image->rowstride * y;
+ int i;
+
+ for (i = 0; i < width; ++i)
+ {
+ uint32_t pixel;
+
+ SPLIT_A (values[i]);
+ pixel = (((a >> 4) & 0x8) |
+ ((r >> 5) & 0x4) |
+ ((g >> 6) & 0x2) |
+ ((b >> 7) ));
+
+ STORE_4 (image, bits, i + x, pixel);
+ }
+}
+
+static void
+store_scanline_a1b1g1r1 (bits_image_t * image,
+ int x,
+ int y,
+ int width,
+ const uint32_t *values)
+{
+ uint32_t *bits = image->bits + image->rowstride * y;
+ int i;
+
+ for (i = 0; i < width; ++i)
+ {
+ uint32_t pixel;
+
+ SPLIT_A (values[i]);
+ pixel = (((a >> 4) & 0x8) |
+ ((b >> 5) & 0x4) |
+ ((g >> 6) & 0x2) |
+ ((r >> 7) ));
+
+ STORE_4 (image, bits, i + x, pixel);
+ }
+}
+
+static void
+store_scanline_c4 (bits_image_t * image,
+ int x,
+ int y,
+ int width,
+ const uint32_t *values)
+{
+ uint32_t *bits = image->bits + image->rowstride * y;
+ const pixman_indexed_t *indexed = image->indexed;
+ int i;
+
+ for (i = 0; i < width; ++i)
+ {
+ uint32_t pixel;
+
+ pixel = RGB24_TO_ENTRY (indexed, values[i]);
+ STORE_4 (image, bits, i + x, pixel);
+ }
+}
+
+static void
+store_scanline_g4 (bits_image_t * image,
+ int x,
+ int y,
+ int width,
+ const uint32_t *values)
+{
+ uint32_t *bits = image->bits + image->rowstride * y;
+ const pixman_indexed_t *indexed = image->indexed;
+ int i;
+
+ for (i = 0; i < width; ++i)
+ {
+ uint32_t pixel;
+
+ pixel = RGB24_TO_ENTRY_Y (indexed, values[i]);
+ STORE_4 (image, bits, i + x, pixel);
+ }
+}
+
+static void
+store_scanline_a1 (bits_image_t * image,
+ int x,
+ int y,
+ int width,
+ const uint32_t *values)
+{
+ uint32_t *bits = image->bits + image->rowstride * y;
+ int i;
+
+ for (i = 0; i < width; ++i)
+ {
+ uint32_t *pixel = ((uint32_t *) bits) + ((i + x) >> 5);
+ uint32_t mask, v;
+
+#ifdef WORDS_BIGENDIAN
+ mask = 1 << (0x1f - ((i + x) & 0x1f));
+#else
+ mask = 1 << ((i + x) & 0x1f);
+#endif
+ v = values[i] & 0x80000000 ? mask : 0;
+
+ WRITE (image, pixel, (READ (image, pixel) & ~mask) | v);
+ }
+}
+
+static void
+store_scanline_g1 (bits_image_t * image,
+ int x,
+ int y,
+ int width,
+ const uint32_t *values)
+{
+ uint32_t *bits = image->bits + image->rowstride * y;
+ const pixman_indexed_t *indexed = image->indexed;
+ int i;
+
+ for (i = 0; i < width; ++i)
+ {
+ uint32_t *pixel = ((uint32_t *) bits) + ((i + x) >> 5);
+ uint32_t mask, v;
+
+#ifdef WORDS_BIGENDIAN
+ mask = 1 << (0x1f - ((i + x) & 0x1f));
+#else
+ mask = 1 << ((i + x) & 0x1f);
+#endif
+ v = RGB24_TO_ENTRY_Y (indexed, values[i]) & 0x1 ? mask : 0;
+
+ WRITE (image, pixel, (READ (image, pixel) & ~mask) | v);
+ }
+}
+
+/*
+ * Contracts a 64bpp image to 32bpp and then stores it using a regular 32-bit
+ * store proc. Despite the type, this function expects a uint64_t buffer.
+ */
+static void
+store_scanline_generic_64 (bits_image_t * image,
+ int x,
+ int y,
+ int width,
+ const uint32_t *values)
+{
+ uint32_t *argb8_pixels;
+
+ assert (image->common.type == BITS);
+
+ argb8_pixels = pixman_malloc_ab (width, sizeof(uint32_t));
+ if (!argb8_pixels)
+ return;
+
+ /* Contract the scanline. We could do this in place if values weren't
+ * const.
+ */
+ pixman_contract (argb8_pixels, (uint64_t *)values, width);
+
+ image->store_scanline_raw_32 (image, x, y, width, argb8_pixels);
+
+ free (argb8_pixels);
+}
+
+/* Despite the type, this function expects both buffer
+ * and mask to be uint64_t
+ */
+static void
+fetch_scanline_generic_64 (pixman_image_t *image,
+ int x,
+ int y,
+ int width,
+ uint32_t * buffer,
+ const uint32_t *mask)
+{
+ pixman_format_code_t format;
+
+ /* Fetch the pixels into the first half of buffer and then expand them in
+ * place.
+ */
+ image->bits.fetch_scanline_raw_32 (image, x, y, width, buffer, NULL);
+
+ format = image->bits.format;
+ if (PIXMAN_FORMAT_TYPE (format) == PIXMAN_TYPE_COLOR ||
+ PIXMAN_FORMAT_TYPE (format) == PIXMAN_TYPE_GRAY)
+ {
+ /* Indexed formats are mapped to a8r8g8b8 with full
+ * precision, so when expanding we shouldn't correct
+ * for the width of the channels
+ */
+
+ format = PIXMAN_a8r8g8b8;
+ }
+
+ pixman_expand ((uint64_t *)buffer, buffer, format, width);
+}
+
+/* Despite the type, this function expects a uint64_t *buffer */
+static uint64_t
+fetch_pixel_generic_64 (bits_image_t *image,
+ int offset,
+ int line)
+{
+ uint32_t pixel32 = image->fetch_pixel_raw_32 (image, offset, line);
+ uint64_t result;
+ pixman_format_code_t format;
+
+ format = image->format;
+ if (PIXMAN_FORMAT_TYPE (format) == PIXMAN_TYPE_COLOR ||
+ PIXMAN_FORMAT_TYPE (format) == PIXMAN_TYPE_GRAY)
+ {
+ /* Indexed formats are mapped to a8r8g8b8 with full
+ * precision, so when expanding we shouldn't correct
+ * for the width of the channels
+ */
+
+ format = PIXMAN_a8r8g8b8;
+ }
+
+ pixman_expand ((uint64_t *)&result, &pixel32, format, 1);
+
+ return result;
+}
+
+/*
+ * XXX: The transformed fetch path only works at 32-bpp so far. When all
+ * paths have wide versions, this can be removed.
+ *
+ * WARNING: This function loses precision!
+ */
+static uint32_t
+fetch_pixel_generic_lossy_32 (bits_image_t *image,
+ int offset,
+ int line)
+{
+ uint64_t pixel64 = image->fetch_pixel_raw_64 (image, offset, line);
+ uint32_t result;
+
+ pixman_contract (&result, &pixel64, 1);
+
+ return result;
+}
+
+typedef struct
+{
+ pixman_format_code_t format;
+ fetch_scanline_t fetch_scanline_raw_32;
+ fetch_scanline_t fetch_scanline_raw_64;
+ fetch_pixel_32_t fetch_pixel_raw_32;
+ fetch_pixel_64_t fetch_pixel_raw_64;
+ store_scanline_t store_scanline_raw_32;
+ store_scanline_t store_scanline_raw_64;
+} format_info_t;
+
+#define FORMAT_INFO(format) \
+ { \
+ PIXMAN_ ## format, \
+ fetch_scanline_ ## format, \
+ fetch_scanline_generic_64, \
+ fetch_pixel_ ## format, fetch_pixel_generic_64, \
+ store_scanline_ ## format, store_scanline_generic_64 \
+ }
+
+static const format_info_t accessors[] =
+{
+/* 32 bpp formats */
+ FORMAT_INFO (a8r8g8b8),
+ FORMAT_INFO (x8r8g8b8),
+ FORMAT_INFO (a8b8g8r8),
+ FORMAT_INFO (x8b8g8r8),
+ FORMAT_INFO (b8g8r8a8),
+ FORMAT_INFO (b8g8r8x8),
+ FORMAT_INFO (x14r6g6b6),
+
+/* 24bpp formats */
+ FORMAT_INFO (r8g8b8),
+ FORMAT_INFO (b8g8r8),
+
+/* 16bpp formats */
+ FORMAT_INFO (r5g6b5),
+ FORMAT_INFO (b5g6r5),
+
+ FORMAT_INFO (a1r5g5b5),
+ FORMAT_INFO (x1r5g5b5),
+ FORMAT_INFO (a1b5g5r5),
+ FORMAT_INFO (x1b5g5r5),
+ FORMAT_INFO (a4r4g4b4),
+ FORMAT_INFO (x4r4g4b4),
+ FORMAT_INFO (a4b4g4r4),
+ FORMAT_INFO (x4b4g4r4),
+
+/* 8bpp formats */
+ FORMAT_INFO (a8),
+ FORMAT_INFO (r3g3b2),
+ FORMAT_INFO (b2g3r3),
+ FORMAT_INFO (a2r2g2b2),
+ FORMAT_INFO (a2b2g2r2),
+
+ FORMAT_INFO (c8),
+
+#define fetch_scanline_g8 fetch_scanline_c8
+#define fetch_pixel_g8 fetch_pixel_c8
+ FORMAT_INFO (g8),
+
+#define fetch_scanline_x4c4 fetch_scanline_c8
+#define fetch_pixel_x4c4 fetch_pixel_c8
+#define store_scanline_x4c4 store_scanline_c8
+ FORMAT_INFO (x4c4),
+
+#define fetch_scanline_x4g4 fetch_scanline_c8
+#define fetch_pixel_x4g4 fetch_pixel_c8
+#define store_scanline_x4g4 store_scanline_g8
+ FORMAT_INFO (x4g4),
+
+ FORMAT_INFO (x4a4),
+
+/* 4bpp formats */
+ FORMAT_INFO (a4),
+ FORMAT_INFO (r1g2b1),
+ FORMAT_INFO (b1g2r1),
+ FORMAT_INFO (a1r1g1b1),
+ FORMAT_INFO (a1b1g1r1),
+
+ FORMAT_INFO (c4),
+
+#define fetch_scanline_g4 fetch_scanline_c4
+#define fetch_pixel_g4 fetch_pixel_c4
+ FORMAT_INFO (g4),
+
+/* 1bpp formats */
+ FORMAT_INFO (a1),
+ FORMAT_INFO (g1),
+
+/* Wide formats */
+
+ { PIXMAN_a2r10g10b10,
+ NULL, fetch_scanline_a2r10g10b10,
+ fetch_pixel_generic_lossy_32, fetch_pixel_a2r10g10b10,
+ NULL, store_scanline_a2r10g10b10 },
+
+ { PIXMAN_x2r10g10b10,
+ NULL, fetch_scanline_x2r10g10b10,
+ fetch_pixel_generic_lossy_32, fetch_pixel_x2r10g10b10,
+ NULL, store_scanline_x2r10g10b10 },
+
+ { PIXMAN_a2b10g10r10,
+ NULL, fetch_scanline_a2b10g10r10,
+ fetch_pixel_generic_lossy_32, fetch_pixel_a2b10g10r10,
+ NULL, store_scanline_a2b10g10r10 },
+
+ { PIXMAN_x2b10g10r10,
+ NULL, fetch_scanline_x2b10g10r10,
+ fetch_pixel_generic_lossy_32, fetch_pixel_x2b10g10r10,
+ NULL, store_scanline_x2b10g10r10 },
+
+/* YUV formats */
+ { PIXMAN_yuy2,
+ fetch_scanline_yuy2, fetch_scanline_generic_64,
+ fetch_pixel_yuy2, fetch_pixel_generic_64,
+ NULL, NULL },
+
+ { PIXMAN_yv12,
+ fetch_scanline_yv12, fetch_scanline_generic_64,
+ fetch_pixel_yv12, fetch_pixel_generic_64,
+ NULL, NULL },
+
+ { PIXMAN_null },
+};
+
+static void
+setup_accessors (bits_image_t *image)
+{
+ const format_info_t *info = accessors;
+
+ while (info->format != PIXMAN_null)
+ {
+ if (info->format == image->format)
+ {
+ image->fetch_scanline_raw_32 = info->fetch_scanline_raw_32;
+ image->fetch_scanline_raw_64 = info->fetch_scanline_raw_64;
+ image->fetch_pixel_raw_32 = info->fetch_pixel_raw_32;
+ image->fetch_pixel_raw_64 = info->fetch_pixel_raw_64;
+ image->store_scanline_raw_32 = info->store_scanline_raw_32;
+ image->store_scanline_raw_64 = info->store_scanline_raw_64;
+
+ return;
+ }
+
+ info++;
+ }
+}
+
+#ifndef PIXMAN_FB_ACCESSORS
+void
+_pixman_bits_image_setup_raw_accessors_accessors (bits_image_t *image);
+
+void
+_pixman_bits_image_setup_raw_accessors (bits_image_t *image)
+{
+ if (image->read_func || image->write_func)
+ _pixman_bits_image_setup_raw_accessors_accessors (image);
+ else
+ setup_accessors (image);
+}
+
+#else
+
+void
+_pixman_bits_image_setup_raw_accessors_accessors (bits_image_t *image)
+{
+ setup_accessors (image);
+}
+
+#endif
diff --git a/pixman/pixman/pixman-arm-detect-win32.asm b/pixman/pixman/pixman-arm-detect-win32.asm new file mode 100644 index 000000000..8f5d5eb2a --- /dev/null +++ b/pixman/pixman/pixman-arm-detect-win32.asm @@ -0,0 +1,21 @@ + area pixman_msvc, code, readonly
+
+ export pixman_msvc_try_arm_simd_op
+
+pixman_msvc_try_arm_simd_op
+ ;; I don't think the msvc arm asm knows how to do SIMD insns
+ ;; uqadd8 r3,r3,r3
+ dcd 0xe6633f93
+ mov pc,lr
+ endp
+
+ export pixman_msvc_try_arm_neon_op
+
+pixman_msvc_try_arm_neon_op
+ ;; I don't think the msvc arm asm knows how to do NEON insns
+ ;; veor d0,d0,d0
+ dcd 0xf3000110
+ mov pc,lr
+ endp
+
+ end
diff --git a/pixman/pixman/pixman-bits-image.c b/pixman/pixman/pixman-bits-image.c index 3d78ff079..f8a76a5a3 100644 --- a/pixman/pixman/pixman-bits-image.c +++ b/pixman/pixman/pixman-bits-image.c @@ -1,1033 +1,1037 @@ -/* - * Copyright © 2000 Keith Packard, member of The XFree86 Project, Inc. - * 2005 Lars Knoll & Zack Rusin, Trolltech - * 2008 Aaron Plattner, NVIDIA Corporation - * Copyright © 2000 SuSE, Inc. - * Copyright © 2007, 2009 Red Hat, Inc. - * Copyright © 2008 André Tupinambá <andrelrt@gmail.com> - * - * Permission to use, copy, modify, distribute, and sell this software and its - * documentation for any purpose is hereby granted without fee, provided that - * the above copyright notice appear in all copies and that both that - * copyright notice and this permission notice appear in supporting - * documentation, and that the name of Keith Packard not be used in - * advertising or publicity pertaining to distribution of the software without - * specific, written prior permission. Keith Packard makes no - * representations about the suitability of this software for any purpose. It - * is provided "as is" without express or implied warranty. - * - * THE COPYRIGHT HOLDERS DISCLAIM ALL WARRANTIES WITH REGARD TO THIS - * SOFTWARE, INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND - * FITNESS, IN NO EVENT SHALL THE COPYRIGHT HOLDERS BE LIABLE FOR ANY - * SPECIAL, INDIRECT OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES - * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN - * AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING - * OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS - * SOFTWARE. - */ - -#ifdef HAVE_CONFIG_H -#include <config.h> -#endif -#include <stdio.h> -#include <stdlib.h> -#include <string.h> -#include "pixman-private.h" -#include "pixman-combine32.h" - -/* Store functions */ - -static void -bits_image_store_scanline_32 (bits_image_t * image, - int x, - int y, - int width, - const uint32_t *buffer) -{ - image->store_scanline_raw_32 (image, x, y, width, buffer); - - if (image->common.alpha_map) - { - x -= image->common.alpha_origin_x; - y -= image->common.alpha_origin_y; - - bits_image_store_scanline_32 (image->common.alpha_map, x, y, width, buffer); - } -} - -static void -bits_image_store_scanline_64 (bits_image_t * image, - int x, - int y, - int width, - const uint32_t *buffer) -{ - image->store_scanline_raw_64 (image, x, y, width, buffer); - - if (image->common.alpha_map) - { - x -= image->common.alpha_origin_x; - y -= image->common.alpha_origin_y; - - bits_image_store_scanline_64 (image->common.alpha_map, x, y, width, buffer); - } -} - -void -_pixman_image_store_scanline_32 (bits_image_t * image, - int x, - int y, - int width, - const uint32_t *buffer) -{ - image->store_scanline_32 (image, x, y, width, buffer); -} - -void -_pixman_image_store_scanline_64 (bits_image_t * image, - int x, - int y, - int width, - const uint32_t *buffer) -{ - image->store_scanline_64 (image, x, y, width, buffer); -} - -/* Fetch functions */ - -static uint32_t -bits_image_fetch_pixel_alpha (bits_image_t *image, int x, int y) -{ - uint32_t pixel; - uint32_t pixel_a; - - pixel = image->fetch_pixel_raw_32 (image, x, y); - - assert (image->common.alpha_map); - - x -= image->common.alpha_origin_x; - y -= image->common.alpha_origin_y; - - if (x < 0 || x >= image->common.alpha_map->width || - y < 0 || y >= image->common.alpha_map->height) - { - pixel_a = 0; - } - else - { - pixel_a = image->common.alpha_map->fetch_pixel_raw_32 ( - image->common.alpha_map, x, y); - pixel_a = ALPHA_8 (pixel_a); - } - - pixel &= 0x00ffffff; - pixel |= (pixel_a << 24); - - return pixel; -} - -static force_inline uint32_t -get_pixel (bits_image_t *image, int x, int y, pixman_bool_t check_bounds) -{ - if (check_bounds && - (x < 0 || x >= image->width || y < 0 || y >= image->height)) - { - return 0; - } - - return image->fetch_pixel_32 (image, x, y); -} - -static force_inline void -repeat (pixman_repeat_t repeat, int size, int *coord) -{ - switch (repeat) - { - case PIXMAN_REPEAT_NORMAL: - *coord = MOD (*coord, size); - break; - - case PIXMAN_REPEAT_PAD: - *coord = CLIP (*coord, 0, size - 1); - break; - - case PIXMAN_REPEAT_REFLECT: - *coord = MOD (*coord, size * 2); - - if (*coord >= size) - *coord = size * 2 - *coord - 1; - break; - - case PIXMAN_REPEAT_NONE: - break; - - default: - break; - } -} - -static force_inline uint32_t -bits_image_fetch_pixel_nearest (bits_image_t *image, - pixman_fixed_t x, - pixman_fixed_t y) -{ - int x0 = pixman_fixed_to_int (x - pixman_fixed_e); - int y0 = pixman_fixed_to_int (y - pixman_fixed_e); - - if (image->common.repeat != PIXMAN_REPEAT_NONE) - { - repeat (image->common.repeat, image->width, &x0); - repeat (image->common.repeat, image->height, &y0); - - return get_pixel (image, x0, y0, FALSE); - } - else - { - return get_pixel (image, x0, y0, TRUE); - } -} - -#if SIZEOF_LONG > 4 - -static force_inline uint32_t -bilinear_interpolation (uint32_t tl, uint32_t tr, - uint32_t bl, uint32_t br, - int distx, int disty) -{ - uint64_t distxy, distxiy, distixy, distixiy; - uint64_t tl64, tr64, bl64, br64; - uint64_t f, r; - - distxy = distx * disty; - distxiy = distx * (256 - disty); - distixy = (256 - distx) * disty; - distixiy = (256 - distx) * (256 - disty); - - /* Alpha and Blue */ - tl64 = tl & 0xff0000ff; - tr64 = tr & 0xff0000ff; - bl64 = bl & 0xff0000ff; - br64 = br & 0xff0000ff; - - f = tl64 * distixiy + tr64 * distxiy + bl64 * distixy + br64 * distxy; - r = f & 0x0000ff0000ff0000ull; - - /* Red and Green */ - tl64 = tl; - tl64 = ((tl64 << 16) & 0x000000ff00000000ull) | (tl64 & 0x0000ff00ull); - - tr64 = tr; - tr64 = ((tr64 << 16) & 0x000000ff00000000ull) | (tr64 & 0x0000ff00ull); - - bl64 = bl; - bl64 = ((bl64 << 16) & 0x000000ff00000000ull) | (bl64 & 0x0000ff00ull); - - br64 = br; - br64 = ((br64 << 16) & 0x000000ff00000000ull) | (br64 & 0x0000ff00ull); - - f = tl64 * distixiy + tr64 * distxiy + bl64 * distixy + br64 * distxy; - r |= ((f >> 16) & 0x000000ff00000000ull) | (f & 0xff000000ull); - - return (uint32_t)(r >> 16); -} - -#else - -static force_inline uint32_t -bilinear_interpolation (uint32_t tl, uint32_t tr, - uint32_t bl, uint32_t br, - int distx, int disty) -{ - int distxy, distxiy, distixy, distixiy; - uint32_t f, r; - - distxy = distx * disty; - distxiy = (distx << 8) - distxy; /* distx * (256 - disty) */ - distixy = (disty << 8) - distxy; /* disty * (256 - distx) */ - distixiy = - 256 * 256 - (disty << 8) - - (distx << 8) + distxy; /* (256 - distx) * (256 - disty) */ - - /* Blue */ - r = (tl & 0x000000ff) * distixiy + (tr & 0x000000ff) * distxiy - + (bl & 0x000000ff) * distixy + (br & 0x000000ff) * distxy; - - /* Green */ - f = (tl & 0x0000ff00) * distixiy + (tr & 0x0000ff00) * distxiy - + (bl & 0x0000ff00) * distixy + (br & 0x0000ff00) * distxy; - r |= f & 0xff000000; - - tl >>= 16; - tr >>= 16; - bl >>= 16; - br >>= 16; - r >>= 16; - - /* Red */ - f = (tl & 0x000000ff) * distixiy + (tr & 0x000000ff) * distxiy - + (bl & 0x000000ff) * distixy + (br & 0x000000ff) * distxy; - r |= f & 0x00ff0000; - - /* Alpha */ - f = (tl & 0x0000ff00) * distixiy + (tr & 0x0000ff00) * distxiy - + (bl & 0x0000ff00) * distixy + (br & 0x0000ff00) * distxy; - r |= f & 0xff000000; - - return r; -} - -#endif - -static force_inline uint32_t -bits_image_fetch_pixel_bilinear (bits_image_t *image, - pixman_fixed_t x, - pixman_fixed_t y) -{ - pixman_repeat_t repeat_mode = image->common.repeat; - int width = image->width; - int height = image->height; - int x1, y1, x2, y2; - uint32_t tl, tr, bl, br; - int32_t distx, disty; - - x1 = x - pixman_fixed_1 / 2; - y1 = y - pixman_fixed_1 / 2; - - distx = (x1 >> 8) & 0xff; - disty = (y1 >> 8) & 0xff; - - x1 = pixman_fixed_to_int (x1); - y1 = pixman_fixed_to_int (y1); - x2 = x1 + 1; - y2 = y1 + 1; - - if (repeat_mode != PIXMAN_REPEAT_NONE) - { - repeat (repeat_mode, width, &x1); - repeat (repeat_mode, height, &y1); - repeat (repeat_mode, width, &x2); - repeat (repeat_mode, height, &y2); - - tl = get_pixel (image, x1, y1, FALSE); - bl = get_pixel (image, x1, y2, FALSE); - tr = get_pixel (image, x2, y1, FALSE); - br = get_pixel (image, x2, y2, FALSE); - } - else - { - tl = get_pixel (image, x1, y1, TRUE); - tr = get_pixel (image, x2, y1, TRUE); - bl = get_pixel (image, x1, y2, TRUE); - br = get_pixel (image, x2, y2, TRUE); - } - - return bilinear_interpolation (tl, tr, bl, br, distx, disty); -} - -static void -bits_image_fetch_bilinear_no_repeat_8888 (pixman_image_t * ima, - int offset, - int line, - int width, - uint32_t * buffer, - const uint32_t * mask, - uint32_t mask_bits) -{ - bits_image_t *bits = &ima->bits; - pixman_fixed_t x_top, x_bottom, x; - pixman_fixed_t ux_top, ux_bottom, ux; - pixman_vector_t v; - uint32_t top_mask, bottom_mask; - uint32_t *top_row; - uint32_t *bottom_row; - uint32_t *end; - uint32_t zero[2] = { 0, 0 }; - int y, y1, y2; - int disty; - int mask_inc; - int w; - - /* reference point is the center of the pixel */ - v.vector[0] = pixman_int_to_fixed (offset) + pixman_fixed_1 / 2; - v.vector[1] = pixman_int_to_fixed (line) + pixman_fixed_1 / 2; - v.vector[2] = pixman_fixed_1; - - if (!pixman_transform_point_3d (bits->common.transform, &v)) - return; - - ux = ux_top = ux_bottom = bits->common.transform->matrix[0][0]; - x = x_top = x_bottom = v.vector[0] - pixman_fixed_1/2; - - y = v.vector[1] - pixman_fixed_1/2; - disty = (y >> 8) & 0xff; - - /* Load the pointers to the first and second lines from the source - * image that bilinear code must read. - * - * The main trick in this code is about the check if any line are - * outside of the image; - * - * When I realize that a line (any one) is outside, I change - * the pointer to a dummy area with zeros. Once I change this, I - * must be sure the pointer will not change, so I set the - * variables to each pointer increments inside the loop. - */ - y1 = pixman_fixed_to_int (y); - y2 = y1 + 1; - - if (y1 < 0 || y1 >= bits->height) - { - top_row = zero; - x_top = 0; - ux_top = 0; - } - else - { - top_row = bits->bits + y1 * bits->rowstride; - x_top = x; - ux_top = ux; - } - - if (y2 < 0 || y2 >= bits->height) - { - bottom_row = zero; - x_bottom = 0; - ux_bottom = 0; - } - else - { - bottom_row = bits->bits + y2 * bits->rowstride; - x_bottom = x; - ux_bottom = ux; - } - - /* Instead of checking whether the operation uses the mast in - * each loop iteration, verify this only once and prepare the - * variables to make the code smaller inside the loop. - */ - if (!mask) - { - mask_inc = 0; - mask_bits = 1; - mask = &mask_bits; - } - else - { - /* If have a mask, prepare the variables to check it */ - mask_inc = 1; - } - - /* If both are zero, then the whole thing is zero */ - if (top_row == zero && bottom_row == zero) - { - memset (buffer, 0, width * sizeof (uint32_t)); - return; - } - else if (bits->format == PIXMAN_x8r8g8b8) - { - if (top_row == zero) - { - top_mask = 0; - bottom_mask = 0xff000000; - } - else if (bottom_row == zero) - { - top_mask = 0xff000000; - bottom_mask = 0; - } - else - { - top_mask = 0xff000000; - bottom_mask = 0xff000000; - } - } - else - { - top_mask = 0; - bottom_mask = 0; - } - - end = buffer + width; - - /* Zero fill to the left of the image */ - while (buffer < end && x < pixman_fixed_minus_1) - { - *buffer++ = 0; - x += ux; - x_top += ux_top; - x_bottom += ux_bottom; - mask += mask_inc; - } - - /* Left edge - */ - while (buffer < end && x < 0) - { - uint32_t tr, br; - int32_t distx; - - tr = top_row[pixman_fixed_to_int (x_top) + 1] | top_mask; - br = bottom_row[pixman_fixed_to_int (x_bottom) + 1] | bottom_mask; - - distx = (x >> 8) & 0xff; - - *buffer++ = bilinear_interpolation (0, tr, 0, br, distx, disty); - - x += ux; - x_top += ux_top; - x_bottom += ux_bottom; - mask += mask_inc; - } - - /* Main part */ - w = pixman_int_to_fixed (bits->width - 1); - - while (buffer < end && x < w) - { - if (*mask) - { - uint32_t tl, tr, bl, br; - int32_t distx; - - tl = top_row [pixman_fixed_to_int (x_top)] | top_mask; - tr = top_row [pixman_fixed_to_int (x_top) + 1] | top_mask; - bl = bottom_row [pixman_fixed_to_int (x_bottom)] | bottom_mask; - br = bottom_row [pixman_fixed_to_int (x_bottom) + 1] | bottom_mask; - - distx = (x >> 8) & 0xff; - - *buffer = bilinear_interpolation (tl, tr, bl, br, distx, disty); - } - - buffer++; - x += ux; - x_top += ux_top; - x_bottom += ux_bottom; - mask += mask_inc; - } - - /* Right Edge */ - w = pixman_int_to_fixed (bits->width); - while (buffer < end && x < w) - { - if (*mask) - { - uint32_t tl, bl; - int32_t distx; - - tl = top_row [pixman_fixed_to_int (x_top)] | top_mask; - bl = bottom_row [pixman_fixed_to_int (x_bottom)] | bottom_mask; - - distx = (x >> 8) & 0xff; - - *buffer = bilinear_interpolation (tl, 0, bl, 0, distx, disty); - } - - buffer++; - x += ux; - x_top += ux_top; - x_bottom += ux_bottom; - mask += mask_inc; - } - - /* Zero fill to the left of the image */ - while (buffer < end) - *buffer++ = 0; -} - -static force_inline uint32_t -bits_image_fetch_pixel_convolution (bits_image_t *image, - pixman_fixed_t x, - pixman_fixed_t y) -{ - pixman_fixed_t *params = image->common.filter_params; - int x_off = (params[0] - pixman_fixed_1) >> 1; - int y_off = (params[1] - pixman_fixed_1) >> 1; - int32_t cwidth = pixman_fixed_to_int (params[0]); - int32_t cheight = pixman_fixed_to_int (params[1]); - int32_t srtot, sgtot, sbtot, satot; - int32_t i, j, x1, x2, y1, y2; - pixman_repeat_t repeat_mode = image->common.repeat; - int width = image->width; - int height = image->height; - - params += 2; - - x1 = pixman_fixed_to_int (x - pixman_fixed_e - x_off); - y1 = pixman_fixed_to_int (y - pixman_fixed_e - y_off); - x2 = x1 + cwidth; - y2 = y1 + cheight; - - srtot = sgtot = sbtot = satot = 0; - - for (i = y1; i < y2; ++i) - { - for (j = x1; j < x2; ++j) - { - int rx = j; - int ry = i; - - pixman_fixed_t f = *params; - - if (f) - { - uint32_t pixel; - - if (repeat_mode != PIXMAN_REPEAT_NONE) - { - repeat (repeat_mode, width, &rx); - repeat (repeat_mode, height, &ry); - - pixel = get_pixel (image, rx, ry, FALSE); - } - else - { - pixel = get_pixel (image, rx, ry, TRUE); - } - - srtot += RED_8 (pixel) * f; - sgtot += GREEN_8 (pixel) * f; - sbtot += BLUE_8 (pixel) * f; - satot += ALPHA_8 (pixel) * f; - } - - params++; - } - } - - satot >>= 16; - srtot >>= 16; - sgtot >>= 16; - sbtot >>= 16; - - satot = CLIP (satot, 0, 0xff); - srtot = CLIP (srtot, 0, 0xff); - sgtot = CLIP (sgtot, 0, 0xff); - sbtot = CLIP (sbtot, 0, 0xff); - - return ((satot << 24) | (srtot << 16) | (sgtot << 8) | (sbtot)); -} - -static force_inline uint32_t -bits_image_fetch_pixel_filtered (bits_image_t *image, - pixman_fixed_t x, - pixman_fixed_t y) -{ - switch (image->common.filter) - { - case PIXMAN_FILTER_NEAREST: - case PIXMAN_FILTER_FAST: - return bits_image_fetch_pixel_nearest (image, x, y); - break; - - case PIXMAN_FILTER_BILINEAR: - case PIXMAN_FILTER_GOOD: - case PIXMAN_FILTER_BEST: - return bits_image_fetch_pixel_bilinear (image, x, y); - break; - - case PIXMAN_FILTER_CONVOLUTION: - return bits_image_fetch_pixel_convolution (image, x, y); - break; - - default: - break; - } - - return 0; -} - -static void -bits_image_fetch_transformed (pixman_image_t * image, - int offset, - int line, - int width, - uint32_t * buffer, - const uint32_t * mask, - uint32_t mask_bits) -{ - pixman_fixed_t x, y, w; - pixman_fixed_t ux, uy, uw; - pixman_vector_t v; - int i; - - /* reference point is the center of the pixel */ - v.vector[0] = pixman_int_to_fixed (offset) + pixman_fixed_1 / 2; - v.vector[1] = pixman_int_to_fixed (line) + pixman_fixed_1 / 2; - v.vector[2] = pixman_fixed_1; - - /* when using convolution filters or PIXMAN_REPEAT_PAD one - * might get here without a transform */ - if (image->common.transform) - { - if (!pixman_transform_point_3d (image->common.transform, &v)) - return; - - ux = image->common.transform->matrix[0][0]; - uy = image->common.transform->matrix[1][0]; - uw = image->common.transform->matrix[2][0]; - } - else - { - ux = pixman_fixed_1; - uy = 0; - uw = 0; - } - - x = v.vector[0]; - y = v.vector[1]; - w = v.vector[2]; - - if (w == pixman_fixed_1 && uw == 0) /* Affine */ - { - for (i = 0; i < width; ++i) - { - if (!mask || (mask[i] & mask_bits)) - { - buffer[i] = - bits_image_fetch_pixel_filtered (&image->bits, x, y); - } - - x += ux; - y += uy; - } - } - else - { - for (i = 0; i < width; ++i) - { - pixman_fixed_t x0, y0; - - if (!mask || (mask[i] & mask_bits)) - { - x0 = ((pixman_fixed_48_16_t)x << 16) / w; - y0 = ((pixman_fixed_48_16_t)y << 16) / w; - - buffer[i] = - bits_image_fetch_pixel_filtered (&image->bits, x0, y0); - } - - x += ux; - y += uy; - w += uw; - } - } -} - -static void -bits_image_fetch_solid_32 (pixman_image_t * image, - int x, - int y, - int width, - uint32_t * buffer, - const uint32_t * mask, - uint32_t mask_bits) -{ - uint32_t color; - uint32_t *end; - - color = image->bits.fetch_pixel_raw_32 (&image->bits, 0, 0); - - end = buffer + width; - while (buffer < end) - *(buffer++) = color; -} - -static void -bits_image_fetch_solid_64 (pixman_image_t * image, - int x, - int y, - int width, - uint32_t * b, - const uint32_t * unused, - uint32_t unused2) -{ - uint64_t color; - uint64_t *buffer = (uint64_t *)b; - uint64_t *end; - - color = image->bits.fetch_pixel_raw_64 (&image->bits, 0, 0); - - end = buffer + width; - while (buffer < end) - *(buffer++) = color; -} - -static void -bits_image_fetch_untransformed_repeat_none (bits_image_t *image, - pixman_bool_t wide, - int x, - int y, - int width, - uint32_t * buffer) -{ - uint32_t w; - - if (y < 0 || y >= image->height) - { - memset (buffer, 0, width * (wide? 8 : 4)); - return; - } - - if (x < 0) - { - w = MIN (width, -x); - - memset (buffer, 0, w * (wide ? 8 : 4)); - - width -= w; - buffer += w * (wide? 2 : 1); - x += w; - } - - if (x < image->width) - { - w = MIN (width, image->width - x); - - if (wide) - image->fetch_scanline_raw_64 ((pixman_image_t *)image, x, y, w, buffer, NULL, 0); - else - image->fetch_scanline_raw_32 ((pixman_image_t *)image, x, y, w, buffer, NULL, 0); - - width -= w; - buffer += w * (wide? 2 : 1); - x += w; - } - - memset (buffer, 0, width * (wide ? 8 : 4)); -} - -static void -bits_image_fetch_untransformed_repeat_normal (bits_image_t *image, - pixman_bool_t wide, - int x, - int y, - int width, - uint32_t * buffer) -{ - uint32_t w; - - while (y < 0) - y += image->height; - - while (y >= image->height) - y -= image->height; - - while (width) - { - while (x < 0) - x += image->width; - while (x >= image->width) - x -= image->width; - - w = MIN (width, image->width - x); - - if (wide) - image->fetch_scanline_raw_64 ((pixman_image_t *)image, x, y, w, buffer, NULL, 0); - else - image->fetch_scanline_raw_32 ((pixman_image_t *)image, x, y, w, buffer, NULL, 0); - - buffer += w * (wide? 2 : 1); - x += w; - width -= w; - } -} - -static void -bits_image_fetch_untransformed_32 (pixman_image_t * image, - int x, - int y, - int width, - uint32_t * buffer, - const uint32_t * mask, - uint32_t mask_bits) -{ - if (image->common.repeat == PIXMAN_REPEAT_NONE) - { - bits_image_fetch_untransformed_repeat_none ( - &image->bits, FALSE, x, y, width, buffer); - } - else - { - bits_image_fetch_untransformed_repeat_normal ( - &image->bits, FALSE, x, y, width, buffer); - } -} - -static void -bits_image_fetch_untransformed_64 (pixman_image_t * image, - int x, - int y, - int width, - uint32_t * buffer, - const uint32_t * unused, - uint32_t unused2) -{ - if (image->common.repeat == PIXMAN_REPEAT_NONE) - { - bits_image_fetch_untransformed_repeat_none ( - &image->bits, TRUE, x, y, width, buffer); - } - else - { - bits_image_fetch_untransformed_repeat_normal ( - &image->bits, TRUE, x, y, width, buffer); - } -} - -static void -bits_image_property_changed (pixman_image_t *image) -{ - bits_image_t *bits = (bits_image_t *)image; - - _pixman_bits_image_setup_raw_accessors (bits); - - image->bits.fetch_pixel_32 = image->bits.fetch_pixel_raw_32; - - if (bits->common.alpha_map) - { - image->common.get_scanline_64 = - _pixman_image_get_scanline_generic_64; - image->common.get_scanline_32 = - bits_image_fetch_transformed; - - image->bits.fetch_pixel_32 = bits_image_fetch_pixel_alpha; - } - else if ((bits->common.repeat != PIXMAN_REPEAT_NONE) && - bits->width == 1 && - bits->height == 1) - { - image->common.get_scanline_64 = bits_image_fetch_solid_64; - image->common.get_scanline_32 = bits_image_fetch_solid_32; - } - else if (!bits->common.transform && - bits->common.filter != PIXMAN_FILTER_CONVOLUTION && - (bits->common.repeat == PIXMAN_REPEAT_NONE || - bits->common.repeat == PIXMAN_REPEAT_NORMAL)) - { - image->common.get_scanline_64 = bits_image_fetch_untransformed_64; - image->common.get_scanline_32 = bits_image_fetch_untransformed_32; - } - else if (bits->common.transform && - bits->common.transform->matrix[2][0] == 0 && - bits->common.transform->matrix[2][1] == 0 && - bits->common.transform->matrix[2][2] == pixman_fixed_1 && - bits->common.transform->matrix[0][0] > 0 && - bits->common.transform->matrix[1][0] == 0 && - (bits->common.filter == PIXMAN_FILTER_BILINEAR || - bits->common.filter == PIXMAN_FILTER_GOOD || - bits->common.filter == PIXMAN_FILTER_BEST) && - bits->common.repeat == PIXMAN_REPEAT_NONE && - (bits->format == PIXMAN_a8r8g8b8 || - bits->format == PIXMAN_x8r8g8b8)) - { - image->common.get_scanline_64 = - _pixman_image_get_scanline_generic_64; - image->common.get_scanline_32 = - bits_image_fetch_bilinear_no_repeat_8888; - } - else - { - image->common.get_scanline_64 = - _pixman_image_get_scanline_generic_64; - image->common.get_scanline_32 = - bits_image_fetch_transformed; - } - - bits->store_scanline_64 = bits_image_store_scanline_64; - bits->store_scanline_32 = bits_image_store_scanline_32; -} - -static uint32_t * -create_bits (pixman_format_code_t format, - int width, - int height, - int * rowstride_bytes) -{ - int stride; - int buf_size; - int bpp; - - /* what follows is a long-winded way, avoiding any possibility of integer - * overflows, of saying: - * stride = ((width * bpp + 0x1f) >> 5) * sizeof (uint32_t); - */ - - bpp = PIXMAN_FORMAT_BPP (format); - if (pixman_multiply_overflows_int (width, bpp)) - return NULL; - - stride = width * bpp; - if (pixman_addition_overflows_int (stride, 0x1f)) - return NULL; - - stride += 0x1f; - stride >>= 5; - - stride *= sizeof (uint32_t); - - if (pixman_multiply_overflows_int (height, stride)) - return NULL; - - buf_size = height * stride; - - if (rowstride_bytes) - *rowstride_bytes = stride; - - return calloc (buf_size, 1); -} - -PIXMAN_EXPORT pixman_image_t * -pixman_image_create_bits (pixman_format_code_t format, - int width, - int height, - uint32_t * bits, - int rowstride_bytes) -{ - pixman_image_t *image; - uint32_t *free_me = NULL; - - /* must be a whole number of uint32_t's - */ - return_val_if_fail ( - bits == NULL || (rowstride_bytes % sizeof (uint32_t)) == 0, NULL); - - return_val_if_fail (PIXMAN_FORMAT_BPP (format) >= PIXMAN_FORMAT_DEPTH (format), NULL); - - if (!bits && width && height) - { - free_me = bits = create_bits (format, width, height, &rowstride_bytes); - if (!bits) - return NULL; - } - - image = _pixman_image_allocate (); - - if (!image) - { - if (free_me) - free (free_me); - - return NULL; - } - - image->type = BITS; - image->bits.format = format; - image->bits.width = width; - image->bits.height = height; - image->bits.bits = bits; - image->bits.free_me = free_me; - image->bits.read_func = NULL; - image->bits.write_func = NULL; - - /* The rowstride is stored in number of uint32_t */ - image->bits.rowstride = rowstride_bytes / (int) sizeof (uint32_t); - - image->bits.indexed = NULL; - - image->common.property_changed = bits_image_property_changed; - - _pixman_image_reset_clip_region (image); - - return image; -} +/*
+ * Copyright © 2000 Keith Packard, member of The XFree86 Project, Inc.
+ * 2005 Lars Knoll & Zack Rusin, Trolltech
+ * 2008 Aaron Plattner, NVIDIA Corporation
+ * Copyright © 2000 SuSE, Inc.
+ * Copyright © 2007, 2009 Red Hat, Inc.
+ * Copyright © 2008 André Tupinambá <andrelrt@gmail.com>
+ *
+ * Permission to use, copy, modify, distribute, and sell this software and its
+ * documentation for any purpose is hereby granted without fee, provided that
+ * the above copyright notice appear in all copies and that both that
+ * copyright notice and this permission notice appear in supporting
+ * documentation, and that the name of Keith Packard not be used in
+ * advertising or publicity pertaining to distribution of the software without
+ * specific, written prior permission. Keith Packard makes no
+ * representations about the suitability of this software for any purpose. It
+ * is provided "as is" without express or implied warranty.
+ *
+ * THE COPYRIGHT HOLDERS DISCLAIM ALL WARRANTIES WITH REGARD TO THIS
+ * SOFTWARE, INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND
+ * FITNESS, IN NO EVENT SHALL THE COPYRIGHT HOLDERS BE LIABLE FOR ANY
+ * SPECIAL, INDIRECT OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN
+ * AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING
+ * OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS
+ * SOFTWARE.
+ */
+
+#ifdef HAVE_CONFIG_H
+#include <config.h>
+#endif
+#include <stdio.h>
+#include <stdlib.h>
+#include <string.h>
+#include "pixman-private.h"
+#include "pixman-combine32.h"
+
+/* Store functions */
+
+static void
+bits_image_store_scanline_32 (bits_image_t * image,
+ int x,
+ int y,
+ int width,
+ const uint32_t *buffer)
+{
+ image->store_scanline_raw_32 (image, x, y, width, buffer);
+
+ if (image->common.alpha_map)
+ {
+ x -= image->common.alpha_origin_x;
+ y -= image->common.alpha_origin_y;
+
+ bits_image_store_scanline_32 (image->common.alpha_map, x, y, width, buffer);
+ }
+}
+
+static void
+bits_image_store_scanline_64 (bits_image_t * image,
+ int x,
+ int y,
+ int width,
+ const uint32_t *buffer)
+{
+ image->store_scanline_raw_64 (image, x, y, width, buffer);
+
+ if (image->common.alpha_map)
+ {
+ x -= image->common.alpha_origin_x;
+ y -= image->common.alpha_origin_y;
+
+ bits_image_store_scanline_64 (image->common.alpha_map, x, y, width, buffer);
+ }
+}
+
+void
+_pixman_image_store_scanline_32 (bits_image_t * image,
+ int x,
+ int y,
+ int width,
+ const uint32_t *buffer)
+{
+ image->store_scanline_32 (image, x, y, width, buffer);
+}
+
+void
+_pixman_image_store_scanline_64 (bits_image_t * image,
+ int x,
+ int y,
+ int width,
+ const uint32_t *buffer)
+{
+ image->store_scanline_64 (image, x, y, width, buffer);
+}
+
+/* Fetch functions */
+
+static uint32_t
+bits_image_fetch_pixel_alpha (bits_image_t *image, int x, int y)
+{
+ uint32_t pixel;
+ uint32_t pixel_a;
+
+ pixel = image->fetch_pixel_raw_32 (image, x, y);
+
+ assert (image->common.alpha_map);
+
+ x -= image->common.alpha_origin_x;
+ y -= image->common.alpha_origin_y;
+
+ if (x < 0 || x >= image->common.alpha_map->width ||
+ y < 0 || y >= image->common.alpha_map->height)
+ {
+ pixel_a = 0;
+ }
+ else
+ {
+ pixel_a = image->common.alpha_map->fetch_pixel_raw_32 (
+ image->common.alpha_map, x, y);
+ pixel_a = ALPHA_8 (pixel_a);
+ }
+
+ pixel &= 0x00ffffff;
+ pixel |= (pixel_a << 24);
+
+ return pixel;
+}
+
+static force_inline uint32_t
+get_pixel (bits_image_t *image, int x, int y, pixman_bool_t check_bounds)
+{
+ if (check_bounds &&
+ (x < 0 || x >= image->width || y < 0 || y >= image->height))
+ {
+ return 0;
+ }
+
+ return image->fetch_pixel_32 (image, x, y);
+}
+
+static force_inline void
+repeat (pixman_repeat_t repeat, int size, int *coord)
+{
+ switch (repeat)
+ {
+ case PIXMAN_REPEAT_NORMAL:
+ *coord = MOD (*coord, size);
+ break;
+
+ case PIXMAN_REPEAT_PAD:
+ *coord = CLIP (*coord, 0, size - 1);
+ break;
+
+ case PIXMAN_REPEAT_REFLECT:
+ *coord = MOD (*coord, size * 2);
+
+ if (*coord >= size)
+ *coord = size * 2 - *coord - 1;
+ break;
+
+ case PIXMAN_REPEAT_NONE:
+ break;
+
+ default:
+ break;
+ }
+}
+
+static force_inline uint32_t
+bits_image_fetch_pixel_nearest (bits_image_t *image,
+ pixman_fixed_t x,
+ pixman_fixed_t y)
+{
+ int x0 = pixman_fixed_to_int (x - pixman_fixed_e);
+ int y0 = pixman_fixed_to_int (y - pixman_fixed_e);
+
+ if (image->common.repeat != PIXMAN_REPEAT_NONE)
+ {
+ repeat (image->common.repeat, image->width, &x0);
+ repeat (image->common.repeat, image->height, &y0);
+
+ return get_pixel (image, x0, y0, FALSE);
+ }
+ else
+ {
+ return get_pixel (image, x0, y0, TRUE);
+ }
+}
+
+#if SIZEOF_LONG > 4
+
+static force_inline uint32_t
+bilinear_interpolation (uint32_t tl, uint32_t tr,
+ uint32_t bl, uint32_t br,
+ int distx, int disty)
+{
+ uint64_t distxy, distxiy, distixy, distixiy;
+ uint64_t tl64, tr64, bl64, br64;
+ uint64_t f, r;
+
+ distxy = distx * disty;
+ distxiy = distx * (256 - disty);
+ distixy = (256 - distx) * disty;
+ distixiy = (256 - distx) * (256 - disty);
+
+ /* Alpha and Blue */
+ tl64 = tl & 0xff0000ff;
+ tr64 = tr & 0xff0000ff;
+ bl64 = bl & 0xff0000ff;
+ br64 = br & 0xff0000ff;
+
+ f = tl64 * distixiy + tr64 * distxiy + bl64 * distixy + br64 * distxy;
+ r = f & 0x0000ff0000ff0000ull;
+
+ /* Red and Green */
+ tl64 = tl;
+ tl64 = ((tl64 << 16) & 0x000000ff00000000ull) | (tl64 & 0x0000ff00ull);
+
+ tr64 = tr;
+ tr64 = ((tr64 << 16) & 0x000000ff00000000ull) | (tr64 & 0x0000ff00ull);
+
+ bl64 = bl;
+ bl64 = ((bl64 << 16) & 0x000000ff00000000ull) | (bl64 & 0x0000ff00ull);
+
+ br64 = br;
+ br64 = ((br64 << 16) & 0x000000ff00000000ull) | (br64 & 0x0000ff00ull);
+
+ f = tl64 * distixiy + tr64 * distxiy + bl64 * distixy + br64 * distxy;
+ r |= ((f >> 16) & 0x000000ff00000000ull) | (f & 0xff000000ull);
+
+ return (uint32_t)(r >> 16);
+}
+
+#else
+
+static force_inline uint32_t
+bilinear_interpolation (uint32_t tl, uint32_t tr,
+ uint32_t bl, uint32_t br,
+ int distx, int disty)
+{
+ int distxy, distxiy, distixy, distixiy;
+ uint32_t f, r;
+
+ distxy = distx * disty;
+ distxiy = (distx << 8) - distxy; /* distx * (256 - disty) */
+ distixy = (disty << 8) - distxy; /* disty * (256 - distx) */
+ distixiy =
+ 256 * 256 - (disty << 8) -
+ (distx << 8) + distxy; /* (256 - distx) * (256 - disty) */
+
+ /* Blue */
+ r = (tl & 0x000000ff) * distixiy + (tr & 0x000000ff) * distxiy
+ + (bl & 0x000000ff) * distixy + (br & 0x000000ff) * distxy;
+
+ /* Green */
+ f = (tl & 0x0000ff00) * distixiy + (tr & 0x0000ff00) * distxiy
+ + (bl & 0x0000ff00) * distixy + (br & 0x0000ff00) * distxy;
+ r |= f & 0xff000000;
+
+ tl >>= 16;
+ tr >>= 16;
+ bl >>= 16;
+ br >>= 16;
+ r >>= 16;
+
+ /* Red */
+ f = (tl & 0x000000ff) * distixiy + (tr & 0x000000ff) * distxiy
+ + (bl & 0x000000ff) * distixy + (br & 0x000000ff) * distxy;
+ r |= f & 0x00ff0000;
+
+ /* Alpha */
+ f = (tl & 0x0000ff00) * distixiy + (tr & 0x0000ff00) * distxiy
+ + (bl & 0x0000ff00) * distixy + (br & 0x0000ff00) * distxy;
+ r |= f & 0xff000000;
+
+ return r;
+}
+
+#endif
+
+static force_inline uint32_t
+bits_image_fetch_pixel_bilinear (bits_image_t *image,
+ pixman_fixed_t x,
+ pixman_fixed_t y)
+{
+ pixman_repeat_t repeat_mode = image->common.repeat;
+ int width = image->width;
+ int height = image->height;
+ int x1, y1, x2, y2;
+ uint32_t tl, tr, bl, br;
+ int32_t distx, disty;
+
+ x1 = x - pixman_fixed_1 / 2;
+ y1 = y - pixman_fixed_1 / 2;
+
+ distx = (x1 >> 8) & 0xff;
+ disty = (y1 >> 8) & 0xff;
+
+ x1 = pixman_fixed_to_int (x1);
+ y1 = pixman_fixed_to_int (y1);
+ x2 = x1 + 1;
+ y2 = y1 + 1;
+
+ if (repeat_mode != PIXMAN_REPEAT_NONE)
+ {
+ repeat (repeat_mode, width, &x1);
+ repeat (repeat_mode, height, &y1);
+ repeat (repeat_mode, width, &x2);
+ repeat (repeat_mode, height, &y2);
+
+ tl = get_pixel (image, x1, y1, FALSE);
+ bl = get_pixel (image, x1, y2, FALSE);
+ tr = get_pixel (image, x2, y1, FALSE);
+ br = get_pixel (image, x2, y2, FALSE);
+ }
+ else
+ {
+ tl = get_pixel (image, x1, y1, TRUE);
+ tr = get_pixel (image, x2, y1, TRUE);
+ bl = get_pixel (image, x1, y2, TRUE);
+ br = get_pixel (image, x2, y2, TRUE);
+ }
+
+ return bilinear_interpolation (tl, tr, bl, br, distx, disty);
+}
+
+static void
+bits_image_fetch_bilinear_no_repeat_8888 (pixman_image_t * ima,
+ int offset,
+ int line,
+ int width,
+ uint32_t * buffer,
+ const uint32_t * mask)
+{
+ bits_image_t *bits = &ima->bits;
+ pixman_fixed_t x_top, x_bottom, x;
+ pixman_fixed_t ux_top, ux_bottom, ux;
+ pixman_vector_t v;
+ uint32_t top_mask, bottom_mask;
+ uint32_t *top_row;
+ uint32_t *bottom_row;
+ uint32_t *end;
+ uint32_t zero[2] = { 0, 0 };
+ int y, y1, y2;
+ int disty;
+ int mask_inc;
+ int w;
+
+ /* reference point is the center of the pixel */
+ v.vector[0] = pixman_int_to_fixed (offset) + pixman_fixed_1 / 2;
+ v.vector[1] = pixman_int_to_fixed (line) + pixman_fixed_1 / 2;
+ v.vector[2] = pixman_fixed_1;
+
+ if (!pixman_transform_point_3d (bits->common.transform, &v))
+ return;
+
+ ux = ux_top = ux_bottom = bits->common.transform->matrix[0][0];
+ x = x_top = x_bottom = v.vector[0] - pixman_fixed_1/2;
+
+ y = v.vector[1] - pixman_fixed_1/2;
+ disty = (y >> 8) & 0xff;
+
+ /* Load the pointers to the first and second lines from the source
+ * image that bilinear code must read.
+ *
+ * The main trick in this code is about the check if any line are
+ * outside of the image;
+ *
+ * When I realize that a line (any one) is outside, I change
+ * the pointer to a dummy area with zeros. Once I change this, I
+ * must be sure the pointer will not change, so I set the
+ * variables to each pointer increments inside the loop.
+ */
+ y1 = pixman_fixed_to_int (y);
+ y2 = y1 + 1;
+
+ if (y1 < 0 || y1 >= bits->height)
+ {
+ top_row = zero;
+ x_top = 0;
+ ux_top = 0;
+ }
+ else
+ {
+ top_row = bits->bits + y1 * bits->rowstride;
+ x_top = x;
+ ux_top = ux;
+ }
+
+ if (y2 < 0 || y2 >= bits->height)
+ {
+ bottom_row = zero;
+ x_bottom = 0;
+ ux_bottom = 0;
+ }
+ else
+ {
+ bottom_row = bits->bits + y2 * bits->rowstride;
+ x_bottom = x;
+ ux_bottom = ux;
+ }
+
+ /* Instead of checking whether the operation uses the mast in
+ * each loop iteration, verify this only once and prepare the
+ * variables to make the code smaller inside the loop.
+ */
+ if (!mask)
+ {
+ uint32_t mask_bits = 1;
+
+ mask_inc = 0;
+ mask = &mask_bits;
+ }
+ else
+ {
+ /* If have a mask, prepare the variables to check it */
+ mask_inc = 1;
+ }
+
+ /* If both are zero, then the whole thing is zero */
+ if (top_row == zero && bottom_row == zero)
+ {
+ memset (buffer, 0, width * sizeof (uint32_t));
+ return;
+ }
+ else if (bits->format == PIXMAN_x8r8g8b8)
+ {
+ if (top_row == zero)
+ {
+ top_mask = 0;
+ bottom_mask = 0xff000000;
+ }
+ else if (bottom_row == zero)
+ {
+ top_mask = 0xff000000;
+ bottom_mask = 0;
+ }
+ else
+ {
+ top_mask = 0xff000000;
+ bottom_mask = 0xff000000;
+ }
+ }
+ else
+ {
+ top_mask = 0;
+ bottom_mask = 0;
+ }
+
+ end = buffer + width;
+
+ /* Zero fill to the left of the image */
+ while (buffer < end && x < pixman_fixed_minus_1)
+ {
+ *buffer++ = 0;
+ x += ux;
+ x_top += ux_top;
+ x_bottom += ux_bottom;
+ mask += mask_inc;
+ }
+
+ /* Left edge
+ */
+ while (buffer < end && x < 0)
+ {
+ uint32_t tr, br;
+ int32_t distx;
+
+ tr = top_row[pixman_fixed_to_int (x_top) + 1] | top_mask;
+ br = bottom_row[pixman_fixed_to_int (x_bottom) + 1] | bottom_mask;
+
+ distx = (x >> 8) & 0xff;
+
+ *buffer++ = bilinear_interpolation (0, tr, 0, br, distx, disty);
+
+ x += ux;
+ x_top += ux_top;
+ x_bottom += ux_bottom;
+ mask += mask_inc;
+ }
+
+ /* Main part */
+ w = pixman_int_to_fixed (bits->width - 1);
+
+ while (buffer < end && x < w)
+ {
+ if (*mask)
+ {
+ uint32_t tl, tr, bl, br;
+ int32_t distx;
+
+ tl = top_row [pixman_fixed_to_int (x_top)] | top_mask;
+ tr = top_row [pixman_fixed_to_int (x_top) + 1] | top_mask;
+ bl = bottom_row [pixman_fixed_to_int (x_bottom)] | bottom_mask;
+ br = bottom_row [pixman_fixed_to_int (x_bottom) + 1] | bottom_mask;
+
+ distx = (x >> 8) & 0xff;
+
+ *buffer = bilinear_interpolation (tl, tr, bl, br, distx, disty);
+ }
+
+ buffer++;
+ x += ux;
+ x_top += ux_top;
+ x_bottom += ux_bottom;
+ mask += mask_inc;
+ }
+
+ /* Right Edge */
+ w = pixman_int_to_fixed (bits->width);
+ while (buffer < end && x < w)
+ {
+ if (*mask)
+ {
+ uint32_t tl, bl;
+ int32_t distx;
+
+ tl = top_row [pixman_fixed_to_int (x_top)] | top_mask;
+ bl = bottom_row [pixman_fixed_to_int (x_bottom)] | bottom_mask;
+
+ distx = (x >> 8) & 0xff;
+
+ *buffer = bilinear_interpolation (tl, 0, bl, 0, distx, disty);
+ }
+
+ buffer++;
+ x += ux;
+ x_top += ux_top;
+ x_bottom += ux_bottom;
+ mask += mask_inc;
+ }
+
+ /* Zero fill to the left of the image */
+ while (buffer < end)
+ *buffer++ = 0;
+}
+
+static force_inline uint32_t
+bits_image_fetch_pixel_convolution (bits_image_t *image,
+ pixman_fixed_t x,
+ pixman_fixed_t y)
+{
+ pixman_fixed_t *params = image->common.filter_params;
+ int x_off = (params[0] - pixman_fixed_1) >> 1;
+ int y_off = (params[1] - pixman_fixed_1) >> 1;
+ int32_t cwidth = pixman_fixed_to_int (params[0]);
+ int32_t cheight = pixman_fixed_to_int (params[1]);
+ int32_t srtot, sgtot, sbtot, satot;
+ int32_t i, j, x1, x2, y1, y2;
+ pixman_repeat_t repeat_mode = image->common.repeat;
+ int width = image->width;
+ int height = image->height;
+
+ params += 2;
+
+ x1 = pixman_fixed_to_int (x - pixman_fixed_e - x_off);
+ y1 = pixman_fixed_to_int (y - pixman_fixed_e - y_off);
+ x2 = x1 + cwidth;
+ y2 = y1 + cheight;
+
+ srtot = sgtot = sbtot = satot = 0;
+
+ for (i = y1; i < y2; ++i)
+ {
+ for (j = x1; j < x2; ++j)
+ {
+ int rx = j;
+ int ry = i;
+
+ pixman_fixed_t f = *params;
+
+ if (f)
+ {
+ uint32_t pixel;
+
+ if (repeat_mode != PIXMAN_REPEAT_NONE)
+ {
+ repeat (repeat_mode, width, &rx);
+ repeat (repeat_mode, height, &ry);
+
+ pixel = get_pixel (image, rx, ry, FALSE);
+ }
+ else
+ {
+ pixel = get_pixel (image, rx, ry, TRUE);
+ }
+
+ srtot += RED_8 (pixel) * f;
+ sgtot += GREEN_8 (pixel) * f;
+ sbtot += BLUE_8 (pixel) * f;
+ satot += ALPHA_8 (pixel) * f;
+ }
+
+ params++;
+ }
+ }
+
+ satot >>= 16;
+ srtot >>= 16;
+ sgtot >>= 16;
+ sbtot >>= 16;
+
+ satot = CLIP (satot, 0, 0xff);
+ srtot = CLIP (srtot, 0, 0xff);
+ sgtot = CLIP (sgtot, 0, 0xff);
+ sbtot = CLIP (sbtot, 0, 0xff);
+
+ return ((satot << 24) | (srtot << 16) | (sgtot << 8) | (sbtot));
+}
+
+static force_inline uint32_t
+bits_image_fetch_pixel_filtered (bits_image_t *image,
+ pixman_fixed_t x,
+ pixman_fixed_t y)
+{
+ switch (image->common.filter)
+ {
+ case PIXMAN_FILTER_NEAREST:
+ case PIXMAN_FILTER_FAST:
+ return bits_image_fetch_pixel_nearest (image, x, y);
+ break;
+
+ case PIXMAN_FILTER_BILINEAR:
+ case PIXMAN_FILTER_GOOD:
+ case PIXMAN_FILTER_BEST:
+ return bits_image_fetch_pixel_bilinear (image, x, y);
+ break;
+
+ case PIXMAN_FILTER_CONVOLUTION:
+ return bits_image_fetch_pixel_convolution (image, x, y);
+ break;
+
+ default:
+ break;
+ }
+
+ return 0;
+}
+
+static void
+bits_image_fetch_transformed (pixman_image_t * image,
+ int offset,
+ int line,
+ int width,
+ uint32_t * buffer,
+ const uint32_t * mask)
+{
+ pixman_fixed_t x, y, w;
+ pixman_fixed_t ux, uy, uw;
+ pixman_vector_t v;
+ int i;
+
+ /* reference point is the center of the pixel */
+ v.vector[0] = pixman_int_to_fixed (offset) + pixman_fixed_1 / 2;
+ v.vector[1] = pixman_int_to_fixed (line) + pixman_fixed_1 / 2;
+ v.vector[2] = pixman_fixed_1;
+
+ /* when using convolution filters or PIXMAN_REPEAT_PAD one
+ * might get here without a transform */
+ if (image->common.transform)
+ {
+ if (!pixman_transform_point_3d (image->common.transform, &v))
+ return;
+
+ ux = image->common.transform->matrix[0][0];
+ uy = image->common.transform->matrix[1][0];
+ uw = image->common.transform->matrix[2][0];
+ }
+ else
+ {
+ ux = pixman_fixed_1;
+ uy = 0;
+ uw = 0;
+ }
+
+ x = v.vector[0];
+ y = v.vector[1];
+ w = v.vector[2];
+
+ if (w == pixman_fixed_1 && uw == 0) /* Affine */
+ {
+ for (i = 0; i < width; ++i)
+ {
+ if (!mask || mask[i])
+ {
+ buffer[i] =
+ bits_image_fetch_pixel_filtered (&image->bits, x, y);
+ }
+
+ x += ux;
+ y += uy;
+ }
+ }
+ else
+ {
+ for (i = 0; i < width; ++i)
+ {
+ if (!mask || mask[i])
+ {
+ pixman_fixed_t x0, y0;
+
+ if (w != 0)
+ {
+ x0 = ((pixman_fixed_48_16_t)x << 16) / w;
+ y0 = ((pixman_fixed_48_16_t)y << 16) / w;
+ }
+ else
+ {
+ x0 = 0;
+ y0 = 0;
+ }
+
+ buffer[i] =
+ bits_image_fetch_pixel_filtered (&image->bits, x0, y0);
+ }
+
+ x += ux;
+ y += uy;
+ w += uw;
+ }
+ }
+}
+
+static void
+bits_image_fetch_solid_32 (pixman_image_t * image,
+ int x,
+ int y,
+ int width,
+ uint32_t * buffer,
+ const uint32_t * mask)
+{
+ uint32_t color;
+ uint32_t *end;
+
+ color = image->bits.fetch_pixel_raw_32 (&image->bits, 0, 0);
+
+ end = buffer + width;
+ while (buffer < end)
+ *(buffer++) = color;
+}
+
+static void
+bits_image_fetch_solid_64 (pixman_image_t * image,
+ int x,
+ int y,
+ int width,
+ uint32_t * b,
+ const uint32_t * unused)
+{
+ uint64_t color;
+ uint64_t *buffer = (uint64_t *)b;
+ uint64_t *end;
+
+ color = image->bits.fetch_pixel_raw_64 (&image->bits, 0, 0);
+
+ end = buffer + width;
+ while (buffer < end)
+ *(buffer++) = color;
+}
+
+static void
+bits_image_fetch_untransformed_repeat_none (bits_image_t *image,
+ pixman_bool_t wide,
+ int x,
+ int y,
+ int width,
+ uint32_t * buffer)
+{
+ uint32_t w;
+
+ if (y < 0 || y >= image->height)
+ {
+ memset (buffer, 0, width * (wide? 8 : 4));
+ return;
+ }
+
+ if (x < 0)
+ {
+ w = MIN (width, -x);
+
+ memset (buffer, 0, w * (wide ? 8 : 4));
+
+ width -= w;
+ buffer += w * (wide? 2 : 1);
+ x += w;
+ }
+
+ if (x < image->width)
+ {
+ w = MIN (width, image->width - x);
+
+ if (wide)
+ image->fetch_scanline_raw_64 ((pixman_image_t *)image, x, y, w, buffer, NULL);
+ else
+ image->fetch_scanline_raw_32 ((pixman_image_t *)image, x, y, w, buffer, NULL);
+
+ width -= w;
+ buffer += w * (wide? 2 : 1);
+ x += w;
+ }
+
+ memset (buffer, 0, width * (wide ? 8 : 4));
+}
+
+static void
+bits_image_fetch_untransformed_repeat_normal (bits_image_t *image,
+ pixman_bool_t wide,
+ int x,
+ int y,
+ int width,
+ uint32_t * buffer)
+{
+ uint32_t w;
+
+ while (y < 0)
+ y += image->height;
+
+ while (y >= image->height)
+ y -= image->height;
+
+ while (width)
+ {
+ while (x < 0)
+ x += image->width;
+ while (x >= image->width)
+ x -= image->width;
+
+ w = MIN (width, image->width - x);
+
+ if (wide)
+ image->fetch_scanline_raw_64 ((pixman_image_t *)image, x, y, w, buffer, NULL);
+ else
+ image->fetch_scanline_raw_32 ((pixman_image_t *)image, x, y, w, buffer, NULL);
+
+ buffer += w * (wide? 2 : 1);
+ x += w;
+ width -= w;
+ }
+}
+
+static void
+bits_image_fetch_untransformed_32 (pixman_image_t * image,
+ int x,
+ int y,
+ int width,
+ uint32_t * buffer,
+ const uint32_t * mask)
+{
+ if (image->common.repeat == PIXMAN_REPEAT_NONE)
+ {
+ bits_image_fetch_untransformed_repeat_none (
+ &image->bits, FALSE, x, y, width, buffer);
+ }
+ else
+ {
+ bits_image_fetch_untransformed_repeat_normal (
+ &image->bits, FALSE, x, y, width, buffer);
+ }
+}
+
+static void
+bits_image_fetch_untransformed_64 (pixman_image_t * image,
+ int x,
+ int y,
+ int width,
+ uint32_t * buffer,
+ const uint32_t * unused)
+{
+ if (image->common.repeat == PIXMAN_REPEAT_NONE)
+ {
+ bits_image_fetch_untransformed_repeat_none (
+ &image->bits, TRUE, x, y, width, buffer);
+ }
+ else
+ {
+ bits_image_fetch_untransformed_repeat_normal (
+ &image->bits, TRUE, x, y, width, buffer);
+ }
+}
+
+static void
+bits_image_property_changed (pixman_image_t *image)
+{
+ bits_image_t *bits = (bits_image_t *)image;
+
+ _pixman_bits_image_setup_raw_accessors (bits);
+
+ image->bits.fetch_pixel_32 = image->bits.fetch_pixel_raw_32;
+
+ if (bits->common.alpha_map)
+ {
+ image->common.get_scanline_64 =
+ _pixman_image_get_scanline_generic_64;
+ image->common.get_scanline_32 =
+ bits_image_fetch_transformed;
+
+ image->bits.fetch_pixel_32 = bits_image_fetch_pixel_alpha;
+ }
+ else if ((bits->common.repeat != PIXMAN_REPEAT_NONE) &&
+ bits->width == 1 &&
+ bits->height == 1)
+ {
+ image->common.get_scanline_64 = bits_image_fetch_solid_64;
+ image->common.get_scanline_32 = bits_image_fetch_solid_32;
+ }
+ else if (!bits->common.transform &&
+ bits->common.filter != PIXMAN_FILTER_CONVOLUTION &&
+ (bits->common.repeat == PIXMAN_REPEAT_NONE ||
+ bits->common.repeat == PIXMAN_REPEAT_NORMAL))
+ {
+ image->common.get_scanline_64 = bits_image_fetch_untransformed_64;
+ image->common.get_scanline_32 = bits_image_fetch_untransformed_32;
+ }
+ else if (bits->common.transform &&
+ bits->common.transform->matrix[2][0] == 0 &&
+ bits->common.transform->matrix[2][1] == 0 &&
+ bits->common.transform->matrix[2][2] == pixman_fixed_1 &&
+ bits->common.transform->matrix[0][0] > 0 &&
+ bits->common.transform->matrix[1][0] == 0 &&
+ !bits->read_func &&
+ (bits->common.filter == PIXMAN_FILTER_BILINEAR ||
+ bits->common.filter == PIXMAN_FILTER_GOOD ||
+ bits->common.filter == PIXMAN_FILTER_BEST) &&
+ bits->common.repeat == PIXMAN_REPEAT_NONE &&
+ (bits->format == PIXMAN_a8r8g8b8 ||
+ bits->format == PIXMAN_x8r8g8b8))
+ {
+ image->common.get_scanline_64 =
+ _pixman_image_get_scanline_generic_64;
+ image->common.get_scanline_32 =
+ bits_image_fetch_bilinear_no_repeat_8888;
+ }
+ else
+ {
+ image->common.get_scanline_64 =
+ _pixman_image_get_scanline_generic_64;
+ image->common.get_scanline_32 =
+ bits_image_fetch_transformed;
+ }
+
+ bits->store_scanline_64 = bits_image_store_scanline_64;
+ bits->store_scanline_32 = bits_image_store_scanline_32;
+}
+
+static uint32_t *
+create_bits (pixman_format_code_t format,
+ int width,
+ int height,
+ int * rowstride_bytes)
+{
+ int stride;
+ int buf_size;
+ int bpp;
+
+ /* what follows is a long-winded way, avoiding any possibility of integer
+ * overflows, of saying:
+ * stride = ((width * bpp + 0x1f) >> 5) * sizeof (uint32_t);
+ */
+
+ bpp = PIXMAN_FORMAT_BPP (format);
+ if (pixman_multiply_overflows_int (width, bpp))
+ return NULL;
+
+ stride = width * bpp;
+ if (pixman_addition_overflows_int (stride, 0x1f))
+ return NULL;
+
+ stride += 0x1f;
+ stride >>= 5;
+
+ stride *= sizeof (uint32_t);
+
+ if (pixman_multiply_overflows_int (height, stride))
+ return NULL;
+
+ buf_size = height * stride;
+
+ if (rowstride_bytes)
+ *rowstride_bytes = stride;
+
+ return calloc (buf_size, 1);
+}
+
+PIXMAN_EXPORT pixman_image_t *
+pixman_image_create_bits (pixman_format_code_t format,
+ int width,
+ int height,
+ uint32_t * bits,
+ int rowstride_bytes)
+{
+ pixman_image_t *image;
+ uint32_t *free_me = NULL;
+
+ /* must be a whole number of uint32_t's
+ */
+ return_val_if_fail (
+ bits == NULL || (rowstride_bytes % sizeof (uint32_t)) == 0, NULL);
+
+ return_val_if_fail (PIXMAN_FORMAT_BPP (format) >= PIXMAN_FORMAT_DEPTH (format), NULL);
+
+ if (!bits && width && height)
+ {
+ free_me = bits = create_bits (format, width, height, &rowstride_bytes);
+ if (!bits)
+ return NULL;
+ }
+
+ image = _pixman_image_allocate ();
+
+ if (!image)
+ {
+ if (free_me)
+ free (free_me);
+
+ return NULL;
+ }
+
+ image->type = BITS;
+ image->bits.format = format;
+ image->bits.width = width;
+ image->bits.height = height;
+ image->bits.bits = bits;
+ image->bits.free_me = free_me;
+ image->bits.read_func = NULL;
+ image->bits.write_func = NULL;
+
+ /* The rowstride is stored in number of uint32_t */
+ image->bits.rowstride = rowstride_bytes / (int) sizeof (uint32_t);
+
+ image->bits.indexed = NULL;
+
+ image->common.property_changed = bits_image_property_changed;
+
+ _pixman_image_reset_clip_region (image);
+
+ return image;
+}
diff --git a/pixman/pixman/pixman-combine.h.template b/pixman/pixman/pixman-combine.h.template index 2f6392f96..c5b6dcdc6 100644 --- a/pixman/pixman/pixman-combine.h.template +++ b/pixman/pixman/pixman-combine.h.template @@ -1,226 +1,226 @@ - -#define COMPONENT_SIZE -#define MASK -#define ONE_HALF - -#define A_SHIFT -#define R_SHIFT -#define G_SHIFT -#define A_MASK -#define R_MASK -#define G_MASK - -#define RB_MASK -#define AG_MASK -#define RB_ONE_HALF -#define RB_MASK_PLUS_ONE - -#define ALPHA_c(x) ((x) >> A_SHIFT) -#define RED_c(x) (((x) >> R_SHIFT) & MASK) -#define GREEN_c(x) (((x) >> G_SHIFT) & MASK) -#define BLUE_c(x) ((x) & MASK) - -/* - * Helper macros. - */ - -#define MUL_UNc(a, b, t) \ - ((t) = (a) * (b) + ONE_HALF, ((((t) >> G_SHIFT ) + (t) ) >> G_SHIFT )) - -#define DIV_UNc(a, b) \ - (((comp2_t) (a) * MASK) / (b)) - -#define ADD_UNc(x, y, t) \ - ((t) = x + y, \ - (comp4_t) (comp1_t) ((t) | (0 - ((t) >> G_SHIFT)))) - -#define DIV_ONE_UNc(x) \ - (((x) + ONE_HALF + (((x) + ONE_HALF) >> G_SHIFT)) >> G_SHIFT) - -/* - * The methods below use some tricks to be able to do two color - * components at the same time. - */ - -/* - * x_rb = (x_rb * a) / 255 - */ -#define UNc_rb_MUL_UNc(x, a, t) \ - do \ - { \ - t = ((x) & RB_MASK) * (a); \ - t += RB_ONE_HALF; \ - x = (t + ((t >> G_SHIFT) & RB_MASK)) >> G_SHIFT; \ - x &= RB_MASK; \ - } while (0) - -/* - * x_rb = min (x_rb + y_rb, 255) - */ -#define UNc_rb_ADD_UNc_rb(x, y, t) \ - do \ - { \ - t = ((x) + (y)); \ - t |= RB_MASK_PLUS_ONE - ((t >> G_SHIFT) & RB_MASK); \ - x = (t & RB_MASK); \ - } while (0) - -/* - * x_rb = (x_rb * a_rb) / 255 - */ -#define UNc_rb_MUL_UNc_rb(x, a, t) \ - do \ - { \ - t = (x & MASK) * (a & MASK); \ - t |= (x & R_MASK) * ((a >> R_SHIFT) & MASK); \ - t += RB_ONE_HALF; \ - t = (t + ((t >> G_SHIFT) & RB_MASK)) >> G_SHIFT; \ - x = t & RB_MASK; \ - } while (0) - -/* - * x_c = (x_c * a) / 255 - */ -#define UNcx4_MUL_UNc(x, a) \ - do \ - { \ - comp4_t r1, r2, t; \ - \ - r1 = (x); \ - UNc_rb_MUL_UNc (r1, a, t); \ - \ - r2 = (x) >> G_SHIFT; \ - UNc_rb_MUL_UNc (r2, a, t); \ - \ - x = r1 | (r2 << G_SHIFT); \ - } while (0) - -/* - * x_c = (x_c * a) / 255 + y_c - */ -#define UNcx4_MUL_UNc_ADD_UNcx4(x, a, y) \ - do \ - { \ - comp4_t r1, r2, r3, t; \ - \ - r1 = (x); \ - r2 = (y) & RB_MASK; \ - UNc_rb_MUL_UNc (r1, a, t); \ - UNc_rb_ADD_UNc_rb (r1, r2, t); \ - \ - r2 = (x) >> G_SHIFT; \ - r3 = ((y) >> G_SHIFT) & RB_MASK; \ - UNc_rb_MUL_UNc (r2, a, t); \ - UNc_rb_ADD_UNc_rb (r2, r3, t); \ - \ - x = r1 | (r2 << G_SHIFT); \ - } while (0) - -/* - * x_c = (x_c * a + y_c * b) / 255 - */ -#define UNcx4_MUL_UNc_ADD_UNcx4_MUL_UNc(x, a, y, b) \ - do \ - { \ - comp4_t r1, r2, r3, t; \ - \ - r1 = x; \ - r2 = y; \ - UNc_rb_MUL_UNc (r1, a, t); \ - UNc_rb_MUL_UNc (r2, b, t); \ - UNc_rb_ADD_UNc_rb (r1, r2, t); \ - \ - r2 = (x >> G_SHIFT); \ - r3 = (y >> G_SHIFT); \ - UNc_rb_MUL_UNc (r2, a, t); \ - UNc_rb_MUL_UNc (r3, b, t); \ - UNc_rb_ADD_UNc_rb (r2, r3, t); \ - \ - x = r1 | (r2 << G_SHIFT); \ - } while (0) - -/* - * x_c = (x_c * a_c) / 255 - */ -#define UNcx4_MUL_UNcx4(x, a) \ - do \ - { \ - comp4_t r1, r2, r3, t; \ - \ - r1 = x; \ - r2 = a; \ - UNc_rb_MUL_UNc_rb (r1, r2, t); \ - \ - r2 = x >> G_SHIFT; \ - r3 = a >> G_SHIFT; \ - UNc_rb_MUL_UNc_rb (r2, r3, t); \ - \ - x = r1 | (r2 << G_SHIFT); \ - } while (0) - -/* - * x_c = (x_c * a_c) / 255 + y_c - */ -#define UNcx4_MUL_UNcx4_ADD_UNcx4(x, a, y) \ - do \ - { \ - comp4_t r1, r2, r3, t; \ - \ - r1 = x; \ - r2 = a; \ - UNc_rb_MUL_UNc_rb (r1, r2, t); \ - r2 = y & RB_MASK; \ - UNc_rb_ADD_UNc_rb (r1, r2, t); \ - \ - r2 = (x >> G_SHIFT); \ - r3 = (a >> G_SHIFT); \ - UNc_rb_MUL_UNc_rb (r2, r3, t); \ - r3 = (y >> G_SHIFT) & RB_MASK; \ - UNc_rb_ADD_UNc_rb (r2, r3, t); \ - \ - x = r1 | (r2 << G_SHIFT); \ - } while (0) - -/* - * x_c = (x_c * a_c + y_c * b) / 255 - */ -#define UNcx4_MUL_UNcx4_ADD_UNcx4_MUL_UNc(x, a, y, b) \ - do \ - { \ - comp4_t r1, r2, r3, t; \ - \ - r1 = x; \ - r2 = a; \ - UNc_rb_MUL_UNc_rb (r1, r2, t); \ - r2 = y; \ - UNc_rb_MUL_UNc (r2, b, t); \ - UNc_rb_ADD_UNc_rb (r1, r2, t); \ - \ - r2 = x >> G_SHIFT; \ - r3 = a >> G_SHIFT; \ - UNc_rb_MUL_UNc_rb (r2, r3, t); \ - r3 = y >> G_SHIFT; \ - UNc_rb_MUL_UNc (r3, b, t); \ - UNc_rb_ADD_UNc_rb (r2, r3, t); \ - \ - x = r1 | (r2 << G_SHIFT); \ - } while (0) - -/* - x_c = min(x_c + y_c, 255) - */ -#define UNcx4_ADD_UNcx4(x, y) \ - do \ - { \ - comp4_t r1, r2, r3, t; \ - \ - r1 = x & RB_MASK; \ - r2 = y & RB_MASK; \ - UNc_rb_ADD_UNc_rb (r1, r2, t); \ - \ - r2 = (x >> G_SHIFT) & RB_MASK; \ - r3 = (y >> G_SHIFT) & RB_MASK; \ - UNc_rb_ADD_UNc_rb (r2, r3, t); \ - \ - x = r1 | (r2 << G_SHIFT); \ - } while (0) +
+#define COMPONENT_SIZE
+#define MASK
+#define ONE_HALF
+
+#define A_SHIFT
+#define R_SHIFT
+#define G_SHIFT
+#define A_MASK
+#define R_MASK
+#define G_MASK
+
+#define RB_MASK
+#define AG_MASK
+#define RB_ONE_HALF
+#define RB_MASK_PLUS_ONE
+
+#define ALPHA_c(x) ((x) >> A_SHIFT)
+#define RED_c(x) (((x) >> R_SHIFT) & MASK)
+#define GREEN_c(x) (((x) >> G_SHIFT) & MASK)
+#define BLUE_c(x) ((x) & MASK)
+
+/*
+ * Helper macros.
+ */
+
+#define MUL_UNc(a, b, t) \
+ ((t) = (a) * (b) + ONE_HALF, ((((t) >> G_SHIFT ) + (t) ) >> G_SHIFT ))
+
+#define DIV_UNc(a, b) \
+ (((comp2_t) (a) * MASK) / (b))
+
+#define ADD_UNc(x, y, t) \
+ ((t) = (x) + (y), \
+ (comp4_t) (comp1_t) ((t) | (0 - ((t) >> G_SHIFT))))
+
+#define DIV_ONE_UNc(x) \
+ (((x) + ONE_HALF + (((x) + ONE_HALF) >> G_SHIFT)) >> G_SHIFT)
+
+/*
+ * The methods below use some tricks to be able to do two color
+ * components at the same time.
+ */
+
+/*
+ * x_rb = (x_rb * a) / 255
+ */
+#define UNc_rb_MUL_UNc(x, a, t) \
+ do \
+ { \
+ t = ((x) & RB_MASK) * (a); \
+ t += RB_ONE_HALF; \
+ x = (t + ((t >> G_SHIFT) & RB_MASK)) >> G_SHIFT; \
+ x &= RB_MASK; \
+ } while (0)
+
+/*
+ * x_rb = min (x_rb + y_rb, 255)
+ */
+#define UNc_rb_ADD_UNc_rb(x, y, t) \
+ do \
+ { \
+ t = ((x) + (y)); \
+ t |= RB_MASK_PLUS_ONE - ((t >> G_SHIFT) & RB_MASK); \
+ x = (t & RB_MASK); \
+ } while (0)
+
+/*
+ * x_rb = (x_rb * a_rb) / 255
+ */
+#define UNc_rb_MUL_UNc_rb(x, a, t) \
+ do \
+ { \
+ t = (x & MASK) * (a & MASK); \
+ t |= (x & R_MASK) * ((a >> R_SHIFT) & MASK); \
+ t += RB_ONE_HALF; \
+ t = (t + ((t >> G_SHIFT) & RB_MASK)) >> G_SHIFT; \
+ x = t & RB_MASK; \
+ } while (0)
+
+/*
+ * x_c = (x_c * a) / 255
+ */
+#define UNcx4_MUL_UNc(x, a) \
+ do \
+ { \
+ comp4_t r1__, r2__, t__; \
+ \
+ r1__ = (x); \
+ UNc_rb_MUL_UNc (r1__, (a), t__); \
+ \
+ r2__ = (x) >> G_SHIFT; \
+ UNc_rb_MUL_UNc (r2__, (a), t__); \
+ \
+ (x) = r1__ | (r2__ << G_SHIFT); \
+ } while (0)
+
+/*
+ * x_c = (x_c * a) / 255 + y_c
+ */
+#define UNcx4_MUL_UNc_ADD_UNcx4(x, a, y) \
+ do \
+ { \
+ comp4_t r1__, r2__, r3__, t__; \
+ \
+ r1__ = (x); \
+ r2__ = (y) & RB_MASK; \
+ UNc_rb_MUL_UNc (r1__, (a), t__); \
+ UNc_rb_ADD_UNc_rb (r1__, r2__, t__); \
+ \
+ r2__ = (x) >> G_SHIFT; \
+ r3__ = ((y) >> G_SHIFT) & RB_MASK; \
+ UNc_rb_MUL_UNc (r2__, (a), t__); \
+ UNc_rb_ADD_UNc_rb (r2__, r3__, t__); \
+ \
+ (x) = r1__ | (r2__ << G_SHIFT); \
+ } while (0)
+
+/*
+ * x_c = (x_c * a + y_c * b) / 255
+ */
+#define UNcx4_MUL_UNc_ADD_UNcx4_MUL_UNc(x, a, y, b) \
+ do \
+ { \
+ comp4_t r1__, r2__, r3__, t__; \
+ \
+ r1__ = (x); \
+ r2__ = (y); \
+ UNc_rb_MUL_UNc (r1__, (a), t__); \
+ UNc_rb_MUL_UNc (r2__, (b), t__); \
+ UNc_rb_ADD_UNc_rb (r1__, r2__, t__); \
+ \
+ r2__ = ((x) >> G_SHIFT); \
+ r3__ = ((y) >> G_SHIFT); \
+ UNc_rb_MUL_UNc (r2__, (a), t__); \
+ UNc_rb_MUL_UNc (r3__, (b), t__); \
+ UNc_rb_ADD_UNc_rb (r2__, r3__, t__); \
+ \
+ (x) = r1__ | (r2__ << G_SHIFT); \
+ } while (0)
+
+/*
+ * x_c = (x_c * a_c) / 255
+ */
+#define UNcx4_MUL_UNcx4(x, a) \
+ do \
+ { \
+ comp4_t r1__, r2__, r3__, t__; \
+ \
+ r1__ = (x); \
+ r2__ = (a); \
+ UNc_rb_MUL_UNc_rb (r1__, r2__, t__); \
+ \
+ r2__ = (x) >> G_SHIFT; \
+ r3__ = (a) >> G_SHIFT; \
+ UNc_rb_MUL_UNc_rb (r2__, r3__, t__); \
+ \
+ (x) = r1__ | (r2__ << G_SHIFT); \
+ } while (0)
+
+/*
+ * x_c = (x_c * a_c) / 255 + y_c
+ */
+#define UNcx4_MUL_UNcx4_ADD_UNcx4(x, a, y) \
+ do \
+ { \
+ comp4_t r1__, r2__, r3__, t__; \
+ \
+ r1__ = (x); \
+ r2__ = (a); \
+ UNc_rb_MUL_UNc_rb (r1__, r2__, t__); \
+ r2__ = (y) & RB_MASK; \
+ UNc_rb_ADD_UNc_rb (r1__, r2__, t__); \
+ \
+ r2__ = ((x) >> G_SHIFT); \
+ r3__ = ((a) >> G_SHIFT); \
+ UNc_rb_MUL_UNc_rb (r2__, r3__, t__); \
+ r3__ = ((y) >> G_SHIFT) & RB_MASK; \
+ UNc_rb_ADD_UNc_rb (r2__, r3__, t__); \
+ \
+ (x) = r1__ | (r2__ << G_SHIFT); \
+ } while (0)
+
+/*
+ * x_c = (x_c * a_c + y_c * b) / 255
+ */
+#define UNcx4_MUL_UNcx4_ADD_UNcx4_MUL_UNc(x, a, y, b) \
+ do \
+ { \
+ comp4_t r1__, r2__, r3__, t__; \
+ \
+ r1__ = (x); \
+ r2__ = (a); \
+ UNc_rb_MUL_UNc_rb (r1__, r2__, t__); \
+ r2__ = (y); \
+ UNc_rb_MUL_UNc (r2__, (b), t__); \
+ UNc_rb_ADD_UNc_rb (r1__, r2__, t__); \
+ \
+ r2__ = (x) >> G_SHIFT; \
+ r3__ = (a) >> G_SHIFT; \
+ UNc_rb_MUL_UNc_rb (r2__, r3__, t__); \
+ r3__ = (y) >> G_SHIFT; \
+ UNc_rb_MUL_UNc (r3__, (b), t__); \
+ UNc_rb_ADD_UNc_rb (r2__, r3__, t__); \
+ \
+ x = r1__ | (r2__ << G_SHIFT); \
+ } while (0)
+
+/*
+ x_c = min(x_c + y_c, 255)
+*/
+#define UNcx4_ADD_UNcx4(x, y) \
+ do \
+ { \
+ comp4_t r1__, r2__, r3__, t__; \
+ \
+ r1__ = (x) & RB_MASK; \
+ r2__ = (y) & RB_MASK; \
+ UNc_rb_ADD_UNc_rb (r1__, r2__, t__); \
+ \
+ r2__ = ((x) >> G_SHIFT) & RB_MASK; \
+ r3__ = ((y) >> G_SHIFT) & RB_MASK; \
+ UNc_rb_ADD_UNc_rb (r2__, r3__, t__); \
+ \
+ x = r1__ | (r2__ << G_SHIFT); \
+ } while (0)
diff --git a/pixman/pixman/pixman-combine32.c b/pixman/pixman/pixman-combine32.c deleted file mode 100644 index ab145e405..000000000 --- a/pixman/pixman/pixman-combine32.c +++ /dev/null @@ -1,2440 +0,0 @@ -/* WARNING: This file is generated by combine.pl from combine.inc. - Please edit one of those files rather than this one. */ - -#line 1 "pixman-combine.c.template" -#ifdef HAVE_CONFIG_H -#include <config.h> -#endif - -#include <math.h> -#include <string.h> - -#include "pixman-private.h" - -#include "pixman-combine32.h" - -/*** per channel helper functions ***/ - -static void -combine_mask_ca (uint32_t *src, uint32_t *mask) -{ - uint32_t a = *mask; - - uint32_t x; - uint16_t xa; - - if (!a) - { - *(src) = 0; - return; - } - - x = *(src); - if (a == ~0) - { - x = x >> A_SHIFT; - x |= x << G_SHIFT; - x |= x << R_SHIFT; - *(mask) = x; - return; - } - - xa = x >> A_SHIFT; - UN8x4_MUL_UN8x4 (x, a); - *(src) = x; - - UN8x4_MUL_UN8 (a, xa); - *(mask) = a; -} - -static void -combine_mask_value_ca (uint32_t *src, const uint32_t *mask) -{ - uint32_t a = *mask; - uint32_t x; - - if (!a) - { - *(src) = 0; - return; - } - - if (a == ~0) - return; - - x = *(src); - UN8x4_MUL_UN8x4 (x, a); - *(src) = x; -} - -static void -combine_mask_alpha_ca (const uint32_t *src, uint32_t *mask) -{ - uint32_t a = *(mask); - uint32_t x; - - if (!a) - return; - - x = *(src) >> A_SHIFT; - if (x == MASK) - return; - - if (a == ~0) - { - x |= x << G_SHIFT; - x |= x << R_SHIFT; - *(mask) = x; - return; - } - - UN8x4_MUL_UN8 (a, x); - *(mask) = a; -} - -/* - * There are two ways of handling alpha -- either as a single unified value or - * a separate value for each component, hence each macro must have two - * versions. The unified alpha version has a 'U' at the end of the name, - * the component version has a 'C'. Similarly, functions which deal with - * this difference will have two versions using the same convention. - */ - -/* - * All of the composing functions - */ - -static force_inline uint32_t -combine_mask (const uint32_t *src, const uint32_t *mask, int i) -{ - uint32_t s, m; - - if (mask) - { - m = *(mask + i) >> A_SHIFT; - - if (!m) - return 0; - } - - s = *(src + i); - - if (mask) - UN8x4_MUL_UN8 (s, m); - - return s; -} - -static void -combine_clear (pixman_implementation_t *imp, - pixman_op_t op, - uint32_t * dest, - const uint32_t * src, - const uint32_t * mask, - int width) -{ - memset (dest, 0, width * sizeof(uint32_t)); -} - -static void -combine_src_u (pixman_implementation_t *imp, - pixman_op_t op, - uint32_t * dest, - const uint32_t * src, - const uint32_t * mask, - int width) -{ - int i; - - if (!mask) - memcpy (dest, src, width * sizeof (uint32_t)); - else - { - for (i = 0; i < width; ++i) - { - uint32_t s = combine_mask (src, mask, i); - - *(dest + i) = s; - } - } -} - -/* if the Src is opaque, call combine_src_u */ -static void -combine_over_u (pixman_implementation_t *imp, - pixman_op_t op, - uint32_t * dest, - const uint32_t * src, - const uint32_t * mask, - int width) -{ - int i; - - for (i = 0; i < width; ++i) - { - uint32_t s = combine_mask (src, mask, i); - uint32_t d = *(dest + i); - uint32_t ia = ALPHA_8 (~s); - - UN8x4_MUL_UN8_ADD_UN8x4 (d, ia, s); - *(dest + i) = d; - } -} - -/* if the Dst is opaque, this is a noop */ -static void -combine_over_reverse_u (pixman_implementation_t *imp, - pixman_op_t op, - uint32_t * dest, - const uint32_t * src, - const uint32_t * mask, - int width) -{ - int i; - - for (i = 0; i < width; ++i) - { - uint32_t s = combine_mask (src, mask, i); - uint32_t d = *(dest + i); - uint32_t ia = ALPHA_8 (~*(dest + i)); - UN8x4_MUL_UN8_ADD_UN8x4 (s, ia, d); - *(dest + i) = s; - } -} - -/* if the Dst is opaque, call combine_src_u */ -static void -combine_in_u (pixman_implementation_t *imp, - pixman_op_t op, - uint32_t * dest, - const uint32_t * src, - const uint32_t * mask, - int width) -{ - int i; - - for (i = 0; i < width; ++i) - { - uint32_t s = combine_mask (src, mask, i); - uint32_t a = ALPHA_8 (*(dest + i)); - UN8x4_MUL_UN8 (s, a); - *(dest + i) = s; - } -} - -/* if the Src is opaque, this is a noop */ -static void -combine_in_reverse_u (pixman_implementation_t *imp, - pixman_op_t op, - uint32_t * dest, - const uint32_t * src, - const uint32_t * mask, - int width) -{ - int i; - - for (i = 0; i < width; ++i) - { - uint32_t s = combine_mask (src, mask, i); - uint32_t d = *(dest + i); - uint32_t a = ALPHA_8 (s); - UN8x4_MUL_UN8 (d, a); - *(dest + i) = d; - } -} - -/* if the Dst is opaque, call combine_clear */ -static void -combine_out_u (pixman_implementation_t *imp, - pixman_op_t op, - uint32_t * dest, - const uint32_t * src, - const uint32_t * mask, - int width) -{ - int i; - - for (i = 0; i < width; ++i) - { - uint32_t s = combine_mask (src, mask, i); - uint32_t a = ALPHA_8 (~*(dest + i)); - UN8x4_MUL_UN8 (s, a); - *(dest + i) = s; - } -} - -/* if the Src is opaque, call combine_clear */ -static void -combine_out_reverse_u (pixman_implementation_t *imp, - pixman_op_t op, - uint32_t * dest, - const uint32_t * src, - const uint32_t * mask, - int width) -{ - int i; - - for (i = 0; i < width; ++i) - { - uint32_t s = combine_mask (src, mask, i); - uint32_t d = *(dest + i); - uint32_t a = ALPHA_8 (~s); - UN8x4_MUL_UN8 (d, a); - *(dest + i) = d; - } -} - -/* if the Src is opaque, call combine_in_u */ -/* if the Dst is opaque, call combine_over_u */ -/* if both the Src and Dst are opaque, call combine_src_u */ -static void -combine_atop_u (pixman_implementation_t *imp, - pixman_op_t op, - uint32_t * dest, - const uint32_t * src, - const uint32_t * mask, - int width) -{ - int i; - - for (i = 0; i < width; ++i) - { - uint32_t s = combine_mask (src, mask, i); - uint32_t d = *(dest + i); - uint32_t dest_a = ALPHA_8 (d); - uint32_t src_ia = ALPHA_8 (~s); - - UN8x4_MUL_UN8_ADD_UN8x4_MUL_UN8 (s, dest_a, d, src_ia); - *(dest + i) = s; - } -} - -/* if the Src is opaque, call combine_over_reverse_u */ -/* if the Dst is opaque, call combine_in_reverse_u */ -/* if both the Src and Dst are opaque, call combine_dst_u */ -static void -combine_atop_reverse_u (pixman_implementation_t *imp, - pixman_op_t op, - uint32_t * dest, - const uint32_t * src, - const uint32_t * mask, - int width) -{ - int i; - - for (i = 0; i < width; ++i) - { - uint32_t s = combine_mask (src, mask, i); - uint32_t d = *(dest + i); - uint32_t src_a = ALPHA_8 (s); - uint32_t dest_ia = ALPHA_8 (~d); - - UN8x4_MUL_UN8_ADD_UN8x4_MUL_UN8 (s, dest_ia, d, src_a); - *(dest + i) = s; - } -} - -/* if the Src is opaque, call combine_over_u */ -/* if the Dst is opaque, call combine_over_reverse_u */ -/* if both the Src and Dst are opaque, call combine_clear */ -static void -combine_xor_u (pixman_implementation_t *imp, - pixman_op_t op, - uint32_t * dest, - const uint32_t * src, - const uint32_t * mask, - int width) -{ - int i; - - for (i = 0; i < width; ++i) - { - uint32_t s = combine_mask (src, mask, i); - uint32_t d = *(dest + i); - uint32_t src_ia = ALPHA_8 (~s); - uint32_t dest_ia = ALPHA_8 (~d); - - UN8x4_MUL_UN8_ADD_UN8x4_MUL_UN8 (s, dest_ia, d, src_ia); - *(dest + i) = s; - } -} - -static void -combine_add_u (pixman_implementation_t *imp, - pixman_op_t op, - uint32_t * dest, - const uint32_t * src, - const uint32_t * mask, - int width) -{ - int i; - - for (i = 0; i < width; ++i) - { - uint32_t s = combine_mask (src, mask, i); - uint32_t d = *(dest + i); - UN8x4_ADD_UN8x4 (d, s); - *(dest + i) = d; - } -} - -/* if the Src is opaque, call combine_add_u */ -/* if the Dst is opaque, call combine_add_u */ -/* if both the Src and Dst are opaque, call combine_add_u */ -static void -combine_saturate_u (pixman_implementation_t *imp, - pixman_op_t op, - uint32_t * dest, - const uint32_t * src, - const uint32_t * mask, - int width) -{ - int i; - - for (i = 0; i < width; ++i) - { - uint32_t s = combine_mask (src, mask, i); - uint32_t d = *(dest + i); - uint16_t sa, da; - - sa = s >> A_SHIFT; - da = ~d >> A_SHIFT; - if (sa > da) - { - sa = DIV_UN8 (da, sa); - UN8x4_MUL_UN8 (s, sa); - } - ; - UN8x4_ADD_UN8x4 (d, s); - *(dest + i) = d; - } -} - -/* - * PDF blend modes: - * The following blend modes have been taken from the PDF ISO 32000 - * specification, which at this point in time is available from - * http://www.adobe.com/devnet/acrobat/pdfs/PDF32000_2008.pdf - * The relevant chapters are 11.3.5 and 11.3.6. - * The formula for computing the final pixel color given in 11.3.6 is: - * αr × Cr = (1 – αs) × αb × Cb + (1 – αb) × αs × Cs + αb × αs × B(Cb, Cs) - * with B() being the blend function. - * Note that OVER is a special case of this operation, using B(Cb, Cs) = Cs - * - * These blend modes should match the SVG filter draft specification, as - * it has been designed to mirror ISO 32000. Note that at the current point - * no released draft exists that shows this, as the formulas have not been - * updated yet after the release of ISO 32000. - * - * The default implementation here uses the PDF_SEPARABLE_BLEND_MODE and - * PDF_NON_SEPARABLE_BLEND_MODE macros, which take the blend function as an - * argument. Note that this implementation operates on premultiplied colors, - * while the PDF specification does not. Therefore the code uses the formula - * ar.Cra = (1 – as) . Dca + (1 – ad) . Sca + B(Dca, ad, Sca, as) - */ - -/* - * Multiply - * B(Dca, ad, Sca, as) = Dca.Sca - */ - -static void -combine_multiply_u (pixman_implementation_t *imp, - pixman_op_t op, - uint32_t * dest, - const uint32_t * src, - const uint32_t * mask, - int width) -{ - int i; - - for (i = 0; i < width; ++i) - { - uint32_t s = combine_mask (src, mask, i); - uint32_t d = *(dest + i); - uint32_t ss = s; - uint32_t src_ia = ALPHA_8 (~s); - uint32_t dest_ia = ALPHA_8 (~d); - - UN8x4_MUL_UN8_ADD_UN8x4_MUL_UN8 (ss, dest_ia, d, src_ia); - UN8x4_MUL_UN8x4 (d, s); - UN8x4_ADD_UN8x4 (d, ss); - - *(dest + i) = d; - } -} - -static void -combine_multiply_ca (pixman_implementation_t *imp, - pixman_op_t op, - uint32_t * dest, - const uint32_t * src, - const uint32_t * mask, - int width) -{ - int i; - - for (i = 0; i < width; ++i) - { - uint32_t m = *(mask + i); - uint32_t s = *(src + i); - uint32_t d = *(dest + i); - uint32_t r = d; - uint32_t dest_ia = ALPHA_8 (~d); - - combine_mask_value_ca (&s, &m); - - UN8x4_MUL_UN8x4_ADD_UN8x4_MUL_UN8 (r, ~m, s, dest_ia); - UN8x4_MUL_UN8x4 (d, s); - UN8x4_ADD_UN8x4 (r, d); - - *(dest + i) = r; - } -} - -#define PDF_SEPARABLE_BLEND_MODE(name) \ - static void \ - combine_ ## name ## _u (pixman_implementation_t *imp, \ - pixman_op_t op, \ - uint32_t * dest, \ - const uint32_t * src, \ - const uint32_t * mask, \ - int width) \ - { \ - int i; \ - for (i = 0; i < width; ++i) { \ - uint32_t s = combine_mask (src, mask, i); \ - uint32_t d = *(dest + i); \ - uint8_t sa = ALPHA_8 (s); \ - uint8_t isa = ~sa; \ - uint8_t da = ALPHA_8 (d); \ - uint8_t ida = ~da; \ - uint32_t result; \ - \ - result = d; \ - UN8x4_MUL_UN8_ADD_UN8x4_MUL_UN8 (result, isa, s, ida); \ - \ - *(dest + i) = result + \ - (DIV_ONE_UN8 (sa * da) << A_SHIFT) + \ - (blend_ ## name (RED_8 (d), da, RED_8 (s), sa) << R_SHIFT) + \ - (blend_ ## name (GREEN_8 (d), da, GREEN_8 (s), sa) << G_SHIFT) + \ - (blend_ ## name (BLUE_8 (d), da, BLUE_8 (s), sa)); \ - } \ - } \ - \ - static void \ - combine_ ## name ## _ca (pixman_implementation_t *imp, \ - pixman_op_t op, \ - uint32_t * dest, \ - const uint32_t * src, \ - const uint32_t * mask, \ - int width) \ - { \ - int i; \ - for (i = 0; i < width; ++i) { \ - uint32_t m = *(mask + i); \ - uint32_t s = *(src + i); \ - uint32_t d = *(dest + i); \ - uint8_t da = ALPHA_8 (d); \ - uint8_t ida = ~da; \ - uint32_t result; \ - \ - combine_mask_value_ca (&s, &m); \ - \ - result = d; \ - UN8x4_MUL_UN8x4_ADD_UN8x4_MUL_UN8 (result, ~m, s, ida); \ - \ - result += \ - (DIV_ONE_UN8 (ALPHA_8 (m) * da) << A_SHIFT) + \ - (blend_ ## name (RED_8 (d), da, RED_8 (s), RED_8 (m)) << R_SHIFT) + \ - (blend_ ## name (GREEN_8 (d), da, GREEN_8 (s), GREEN_8 (m)) << G_SHIFT) + \ - (blend_ ## name (BLUE_8 (d), da, BLUE_8 (s), BLUE_8 (m))); \ - \ - *(dest + i) = result; \ - } \ - } - -/* - * Screen - * B(Dca, ad, Sca, as) = Dca.sa + Sca.da - Dca.Sca - */ -static inline uint32_t -blend_screen (uint32_t dca, uint32_t da, uint32_t sca, uint32_t sa) -{ - return DIV_ONE_UN8 (sca * da + dca * sa - sca * dca); -} - -PDF_SEPARABLE_BLEND_MODE (screen) - -/* - * Overlay - * B(Dca, Da, Sca, Sa) = - * if 2.Dca < Da - * 2.Sca.Dca - * otherwise - * Sa.Da - 2.(Da - Dca).(Sa - Sca) - */ -static inline uint32_t -blend_overlay (uint32_t dca, uint32_t da, uint32_t sca, uint32_t sa) -{ - uint32_t rca; - - if (2 * dca < da) - rca = 2 * sca * dca; - else - rca = sa * da - 2 * (da - dca) * (sa - sca); - return DIV_ONE_UN8 (rca); -} - -PDF_SEPARABLE_BLEND_MODE (overlay) - -/* - * Darken - * B(Dca, Da, Sca, Sa) = min (Sca.Da, Dca.Sa) - */ -static inline uint32_t -blend_darken (uint32_t dca, uint32_t da, uint32_t sca, uint32_t sa) -{ - uint32_t s, d; - - s = sca * da; - d = dca * sa; - return DIV_ONE_UN8 (s > d ? d : s); -} - -PDF_SEPARABLE_BLEND_MODE (darken) - -/* - * Lighten - * B(Dca, Da, Sca, Sa) = max (Sca.Da, Dca.Sa) - */ -static inline uint32_t -blend_lighten (uint32_t dca, uint32_t da, uint32_t sca, uint32_t sa) -{ - uint32_t s, d; - - s = sca * da; - d = dca * sa; - return DIV_ONE_UN8 (s > d ? s : d); -} - -PDF_SEPARABLE_BLEND_MODE (lighten) - -/* - * Color dodge - * B(Dca, Da, Sca, Sa) = - * if Dca == 0 - * 0 - * if Sca == Sa - * Sa.Da - * otherwise - * Sa.Da. min (1, Dca / Da / (1 - Sca/Sa)) - */ -static inline uint32_t -blend_color_dodge (uint32_t dca, uint32_t da, uint32_t sca, uint32_t sa) -{ - if (sca >= sa) - { - return dca == 0 ? 0 : DIV_ONE_UN8 (sa * da); - } - else - { - uint32_t rca = dca * sa / (sa - sca); - return DIV_ONE_UN8 (sa * MIN (rca, da)); - } -} - -PDF_SEPARABLE_BLEND_MODE (color_dodge) - -/* - * Color burn - * B(Dca, Da, Sca, Sa) = - * if Dca == Da - * Sa.Da - * if Sca == 0 - * 0 - * otherwise - * Sa.Da.(1 - min (1, (1 - Dca/Da).Sa / Sca)) - */ -static inline uint32_t -blend_color_burn (uint32_t dca, uint32_t da, uint32_t sca, uint32_t sa) -{ - if (sca == 0) - { - return dca < da ? 0 : DIV_ONE_UN8 (sa * da); - } - else - { - uint32_t rca = (da - dca) * sa / sca; - return DIV_ONE_UN8 (sa * (MAX (rca, da) - rca)); - } -} - -PDF_SEPARABLE_BLEND_MODE (color_burn) - -/* - * Hard light - * B(Dca, Da, Sca, Sa) = - * if 2.Sca < Sa - * 2.Sca.Dca - * otherwise - * Sa.Da - 2.(Da - Dca).(Sa - Sca) - */ -static inline uint32_t -blend_hard_light (uint32_t dca, uint32_t da, uint32_t sca, uint32_t sa) -{ - if (2 * sca < sa) - return DIV_ONE_UN8 (2 * sca * dca); - else - return DIV_ONE_UN8 (sa * da - 2 * (da - dca) * (sa - sca)); -} - -PDF_SEPARABLE_BLEND_MODE (hard_light) - -/* - * Soft light - * B(Dca, Da, Sca, Sa) = - * if (2.Sca <= Sa) - * Dca.(Sa - (1 - Dca/Da).(2.Sca - Sa)) - * otherwise if Dca.4 <= Da - * Dca.(Sa + (2.Sca - Sa).((16.Dca/Da - 12).Dca/Da + 3) - * otherwise - * (Dca.Sa + (SQRT (Dca/Da).Da - Dca).(2.Sca - Sa)) - */ -static inline uint32_t -blend_soft_light (uint32_t dca_org, - uint32_t da_org, - uint32_t sca_org, - uint32_t sa_org) -{ - double dca = dca_org * (1.0 / MASK); - double da = da_org * (1.0 / MASK); - double sca = sca_org * (1.0 / MASK); - double sa = sa_org * (1.0 / MASK); - double rca; - - if (2 * sca < sa) - { - if (da == 0) - rca = dca * sa; - else - rca = dca * sa - dca * (da - dca) * (sa - 2 * sca) / da; - } - else if (da == 0) - { - rca = 0; - } - else if (4 * dca <= da) - { - rca = dca * sa + - (2 * sca - sa) * dca * ((16 * dca / da - 12) * dca / da + 3); - } - else - { - rca = dca * sa + (sqrt (dca * da) - dca) * (2 * sca - sa); - } - return rca * MASK + 0.5; -} - -PDF_SEPARABLE_BLEND_MODE (soft_light) - -/* - * Difference - * B(Dca, Da, Sca, Sa) = abs (Dca.Sa - Sca.Da) - */ -static inline uint32_t -blend_difference (uint32_t dca, uint32_t da, uint32_t sca, uint32_t sa) -{ - uint32_t dcasa = dca * sa; - uint32_t scada = sca * da; - - if (scada < dcasa) - return DIV_ONE_UN8 (dcasa - scada); - else - return DIV_ONE_UN8 (scada - dcasa); -} - -PDF_SEPARABLE_BLEND_MODE (difference) - -/* - * Exclusion - * B(Dca, Da, Sca, Sa) = (Sca.Da + Dca.Sa - 2.Sca.Dca) - */ - -/* This can be made faster by writing it directly and not using - * PDF_SEPARABLE_BLEND_MODE, but that's a performance optimization */ - -static inline uint32_t -blend_exclusion (uint32_t dca, uint32_t da, uint32_t sca, uint32_t sa) -{ - return DIV_ONE_UN8 (sca * da + dca * sa - 2 * dca * sca); -} - -PDF_SEPARABLE_BLEND_MODE (exclusion) - -#undef PDF_SEPARABLE_BLEND_MODE - -/* - * PDF nonseperable blend modes are implemented using the following functions - * to operate in Hsl space, with Cmax, Cmid, Cmin referring to the max, mid - * and min value of the red, green and blue components. - * - * LUM (C) = 0.3 × Cred + 0.59 × Cgreen + 0.11 × Cblue - * - * clip_color (C): - * l = LUM (C) - * min = Cmin - * max = Cmax - * if n < 0.0 - * C = l + ( ( ( C – l ) × l ) ⁄ ( l – min ) ) - * if x > 1.0 - * C = l + ( ( ( C – l ) × ( 1 – l ) ) ⁄ ( max – l ) ) - * return C - * - * set_lum (C, l): - * d = l – LUM (C) - * C += d - * return clip_color (C) - * - * SAT (C) = CH_MAX (C) - CH_MIN (C) - * - * set_sat (C, s): - * if Cmax > Cmin - * Cmid = ( ( ( Cmid – Cmin ) × s ) ⁄ ( Cmax – Cmin ) ) - * Cmax = s - * else - * Cmid = Cmax = 0.0 - * Cmin = 0.0 - * return C - */ - -/* For premultiplied colors, we need to know what happens when C is - * multiplied by a real number. LUM and SAT are linear: - * - * LUM (r × C) = r × LUM (C) SAT (r * C) = r * SAT (C) - * - * If we extend clip_color with an extra argument a and change - * - * if x >= 1.0 - * - * into - * - * if x >= a - * - * then clip_color is also linear: - * - * r * clip_color (C, a) = clip_color (r_c, ra); - * - * for positive r. - * - * Similarly, we can extend set_lum with an extra argument that is just passed - * on to clip_color: - * - * r * set_lum ( C, l, a) - * - * = r × clip_color ( C + l - LUM (C), a) - * - * = clip_color ( r * C + r × l - r * LUM (C), r * a) - * - * = set_lum ( r * C, r * l, r * a) - * - * Finally, set_sat: - * - * r * set_sat (C, s) = set_sat (x * C, r * s) - * - * The above holds for all non-zero x, because they x'es in the fraction for - * C_mid cancel out. Specifically, it holds for x = r: - * - * r * set_sat (C, s) = set_sat (r_c, rs) - * - */ - -/* So, for the non-separable PDF blend modes, we have (using s, d for - * non-premultiplied colors, and S, D for premultiplied: - * - * Color: - * - * a_s * a_d * B(s, d) - * = a_s * a_d * set_lum (S/a_s, LUM (D/a_d), 1) - * = set_lum (S * a_d, a_s * LUM (D), a_s * a_d) - * - * - * Luminosity: - * - * a_s * a_d * B(s, d) - * = a_s * a_d * set_lum (D/a_d, LUM(S/a_s), 1) - * = set_lum (a_s * D, a_d * LUM(S), a_s * a_d) - * - * - * Saturation: - * - * a_s * a_d * B(s, d) - * = a_s * a_d * set_lum (set_sat (D/a_d, SAT (S/a_s)), LUM (D/a_d), 1) - * = set_lum (a_s * a_d * set_sat (D/a_d, SAT (S/a_s)), - * a_s * LUM (D), a_s * a_d) - * = set_lum (set_sat (a_s * D, a_d * SAT (S), a_s * LUM (D), a_s * a_d)) - * - * Hue: - * - * a_s * a_d * B(s, d) - * = a_s * a_d * set_lum (set_sat (S/a_s, SAT (D/a_d)), LUM (D/a_d), 1) - * = a_s * a_d * set_lum (set_sat (a_d * S, a_s * SAT (D)), - * a_s * LUM (D), a_s * a_d) - * - */ - -#define CH_MIN(c) (c[0] < c[1] ? (c[0] < c[2] ? c[0] : c[2]) : (c[1] < c[2] ? c[1] : c[2])) -#define CH_MAX(c) (c[0] > c[1] ? (c[0] > c[2] ? c[0] : c[2]) : (c[1] > c[2] ? c[1] : c[2])) -#define LUM(c) ((c[0] * 30 + c[1] * 59 + c[2] * 11) / 100) -#define SAT(c) (CH_MAX (c) - CH_MIN (c)) - -#define PDF_NON_SEPARABLE_BLEND_MODE(name) \ - static void \ - combine_ ## name ## _u (pixman_implementation_t *imp, \ - pixman_op_t op, \ - uint32_t *dest, \ - const uint32_t *src, \ - const uint32_t *mask, \ - int width) \ - { \ - int i; \ - for (i = 0; i < width; ++i) \ - { \ - uint32_t s = combine_mask (src, mask, i); \ - uint32_t d = *(dest + i); \ - uint8_t sa = ALPHA_8 (s); \ - uint8_t isa = ~sa; \ - uint8_t da = ALPHA_8 (d); \ - uint8_t ida = ~da; \ - uint32_t result; \ - uint32_t sc[3], dc[3], c[3]; \ - \ - result = d; \ - UN8x4_MUL_UN8_ADD_UN8x4_MUL_UN8 (result, isa, s, ida); \ - dc[0] = RED_8 (d); \ - sc[0] = RED_8 (s); \ - dc[1] = GREEN_8 (d); \ - sc[1] = GREEN_8 (s); \ - dc[2] = BLUE_8 (d); \ - sc[2] = BLUE_8 (s); \ - blend_ ## name (c, dc, da, sc, sa); \ - \ - *(dest + i) = result + \ - (DIV_ONE_UN8 (sa * da) << A_SHIFT) + \ - (DIV_ONE_UN8 (c[0]) << R_SHIFT) + \ - (DIV_ONE_UN8 (c[1]) << G_SHIFT) + \ - (DIV_ONE_UN8 (c[2])); \ - } \ - } - -static void -set_lum (uint32_t dest[3], uint32_t src[3], uint32_t sa, uint32_t lum) -{ - double a, l, min, max; - double tmp[3]; - - a = sa * (1.0 / MASK); - - l = lum * (1.0 / MASK); - tmp[0] = src[0] * (1.0 / MASK); - tmp[1] = src[1] * (1.0 / MASK); - tmp[2] = src[2] * (1.0 / MASK); - - l = l - LUM (tmp); - tmp[0] += l; - tmp[1] += l; - tmp[2] += l; - - /* clip_color */ - l = LUM (tmp); - min = CH_MIN (tmp); - max = CH_MAX (tmp); - - if (min < 0) - { - tmp[0] = l + (tmp[0] - l) * l / (l - min); - tmp[1] = l + (tmp[1] - l) * l / (l - min); - tmp[2] = l + (tmp[2] - l) * l / (l - min); - } - if (max > a) - { - tmp[0] = l + (tmp[0] - l) * (a - l) / (max - l); - tmp[1] = l + (tmp[1] - l) * (a - l) / (max - l); - tmp[2] = l + (tmp[2] - l) * (a - l) / (max - l); - } - - dest[0] = tmp[0] * MASK + 0.5; - dest[1] = tmp[1] * MASK + 0.5; - dest[2] = tmp[2] * MASK + 0.5; -} - -static void -set_sat (uint32_t dest[3], uint32_t src[3], uint32_t sat) -{ - int id[3]; - uint32_t min, max; - - if (src[0] > src[1]) - { - if (src[0] > src[2]) - { - id[0] = 0; - if (src[1] > src[2]) - { - id[1] = 1; - id[2] = 2; - } - else - { - id[1] = 2; - id[2] = 1; - } - } - else - { - id[0] = 2; - id[1] = 0; - id[2] = 1; - } - } - else - { - if (src[0] > src[2]) - { - id[0] = 1; - id[1] = 0; - id[2] = 2; - } - else - { - id[2] = 0; - if (src[1] > src[2]) - { - id[0] = 1; - id[1] = 2; - } - else - { - id[0] = 2; - id[1] = 1; - } - } - } - - max = dest[id[0]]; - min = dest[id[2]]; - if (max > min) - { - dest[id[1]] = (dest[id[1]] - min) * sat / (max - min); - dest[id[0]] = sat; - dest[id[2]] = 0; - } - else - { - dest[0] = dest[1] = dest[2] = 0; - } -} - -/* - * Hue: - * B(Cb, Cs) = set_lum (set_sat (Cs, SAT (Cb)), LUM (Cb)) - */ -static inline void -blend_hsl_hue (uint32_t c[3], - uint32_t dc[3], - uint32_t da, - uint32_t sc[3], - uint32_t sa) -{ - c[0] = sc[0] * da; - c[1] = sc[1] * da; - c[2] = sc[2] * da; - set_sat (c, c, SAT (dc) * sa); - set_lum (c, c, sa * da, LUM (dc) * sa); -} - -PDF_NON_SEPARABLE_BLEND_MODE (hsl_hue) - -/* - * Saturation: - * B(Cb, Cs) = set_lum (set_sat (Cb, SAT (Cs)), LUM (Cb)) - */ -static inline void -blend_hsl_saturation (uint32_t c[3], - uint32_t dc[3], - uint32_t da, - uint32_t sc[3], - uint32_t sa) -{ - c[0] = dc[0] * sa; - c[1] = dc[1] * sa; - c[2] = dc[2] * sa; - set_sat (c, c, SAT (sc) * da); - set_lum (c, c, sa * da, LUM (dc) * sa); -} - -PDF_NON_SEPARABLE_BLEND_MODE (hsl_saturation) - -/* - * Color: - * B(Cb, Cs) = set_lum (Cs, LUM (Cb)) - */ -static inline void -blend_hsl_color (uint32_t c[3], - uint32_t dc[3], - uint32_t da, - uint32_t sc[3], - uint32_t sa) -{ - c[0] = sc[0] * da; - c[1] = sc[1] * da; - c[2] = sc[2] * da; - set_lum (c, c, sa * da, LUM (dc) * sa); -} - -PDF_NON_SEPARABLE_BLEND_MODE (hsl_color) - -/* - * Luminosity: - * B(Cb, Cs) = set_lum (Cb, LUM (Cs)) - */ -static inline void -blend_hsl_luminosity (uint32_t c[3], - uint32_t dc[3], - uint32_t da, - uint32_t sc[3], - uint32_t sa) -{ - c[0] = dc[0] * sa; - c[1] = dc[1] * sa; - c[2] = dc[2] * sa; - set_lum (c, c, sa * da, LUM (sc) * da); -} - -PDF_NON_SEPARABLE_BLEND_MODE (hsl_luminosity) - -#undef SAT -#undef LUM -#undef CH_MAX -#undef CH_MIN -#undef PDF_NON_SEPARABLE_BLEND_MODE - -/* Overlay - * - * All of the disjoint composing functions - * - * The four entries in the first column indicate what source contributions - * come from each of the four areas of the picture -- areas covered by neither - * A nor B, areas covered only by A, areas covered only by B and finally - * areas covered by both A and B. - * - * Disjoint Conjoint - * Fa Fb Fa Fb - * (0,0,0,0) 0 0 0 0 - * (0,A,0,A) 1 0 1 0 - * (0,0,B,B) 0 1 0 1 - * (0,A,B,A) 1 min((1-a)/b,1) 1 max(1-a/b,0) - * (0,A,B,B) min((1-b)/a,1) 1 max(1-b/a,0) 1 - * (0,0,0,A) max(1-(1-b)/a,0) 0 min(1,b/a) 0 - * (0,0,0,B) 0 max(1-(1-a)/b,0) 0 min(a/b,1) - * (0,A,0,0) min(1,(1-b)/a) 0 max(1-b/a,0) 0 - * (0,0,B,0) 0 min(1,(1-a)/b) 0 max(1-a/b,0) - * (0,0,B,A) max(1-(1-b)/a,0) min(1,(1-a)/b) min(1,b/a) max(1-a/b,0) - * (0,A,0,B) min(1,(1-b)/a) max(1-(1-a)/b,0) max(1-b/a,0) min(1,a/b) - * (0,A,B,0) min(1,(1-b)/a) min(1,(1-a)/b) max(1-b/a,0) max(1-a/b,0) - */ - -#define COMBINE_A_OUT 1 -#define COMBINE_A_IN 2 -#define COMBINE_B_OUT 4 -#define COMBINE_B_IN 8 - -#define COMBINE_CLEAR 0 -#define COMBINE_A (COMBINE_A_OUT | COMBINE_A_IN) -#define COMBINE_B (COMBINE_B_OUT | COMBINE_B_IN) -#define COMBINE_A_OVER (COMBINE_A_OUT | COMBINE_B_OUT | COMBINE_A_IN) -#define COMBINE_B_OVER (COMBINE_A_OUT | COMBINE_B_OUT | COMBINE_B_IN) -#define COMBINE_A_ATOP (COMBINE_B_OUT | COMBINE_A_IN) -#define COMBINE_B_ATOP (COMBINE_A_OUT | COMBINE_B_IN) -#define COMBINE_XOR (COMBINE_A_OUT | COMBINE_B_OUT) - -/* portion covered by a but not b */ -static uint8_t -combine_disjoint_out_part (uint8_t a, uint8_t b) -{ - /* min (1, (1-b) / a) */ - - b = ~b; /* 1 - b */ - if (b >= a) /* 1 - b >= a -> (1-b)/a >= 1 */ - return MASK; /* 1 */ - return DIV_UN8 (b, a); /* (1-b) / a */ -} - -/* portion covered by both a and b */ -static uint8_t -combine_disjoint_in_part (uint8_t a, uint8_t b) -{ - /* max (1-(1-b)/a,0) */ - /* = - min ((1-b)/a - 1, 0) */ - /* = 1 - min (1, (1-b)/a) */ - - b = ~b; /* 1 - b */ - if (b >= a) /* 1 - b >= a -> (1-b)/a >= 1 */ - return 0; /* 1 - 1 */ - return ~DIV_UN8(b, a); /* 1 - (1-b) / a */ -} - -/* portion covered by a but not b */ -static uint8_t -combine_conjoint_out_part (uint8_t a, uint8_t b) -{ - /* max (1-b/a,0) */ - /* = 1-min(b/a,1) */ - - /* min (1, (1-b) / a) */ - - if (b >= a) /* b >= a -> b/a >= 1 */ - return 0x00; /* 0 */ - return ~DIV_UN8(b, a); /* 1 - b/a */ -} - -/* portion covered by both a and b */ -static uint8_t -combine_conjoint_in_part (uint8_t a, uint8_t b) -{ - /* min (1,b/a) */ - - if (b >= a) /* b >= a -> b/a >= 1 */ - return MASK; /* 1 */ - return DIV_UN8 (b, a); /* b/a */ -} - -#define GET_COMP(v, i) ((uint16_t) (uint8_t) ((v) >> i)) - -#define ADD(x, y, i, t) \ - ((t) = GET_COMP (x, i) + GET_COMP (y, i), \ - (uint32_t) ((uint8_t) ((t) | (0 - ((t) >> G_SHIFT)))) << (i)) - -#define GENERIC(x, y, i, ax, ay, t, u, v) \ - ((t) = (MUL_UN8 (GET_COMP (y, i), ay, (u)) + \ - MUL_UN8 (GET_COMP (x, i), ax, (v))), \ - (uint32_t) ((uint8_t) ((t) | \ - (0 - ((t) >> G_SHIFT)))) << (i)) - -static void -combine_disjoint_general_u (uint32_t * dest, - const uint32_t *src, - const uint32_t *mask, - int width, - uint8_t combine) -{ - int i; - - for (i = 0; i < width; ++i) - { - uint32_t s = combine_mask (src, mask, i); - uint32_t d = *(dest + i); - uint32_t m, n, o, p; - uint16_t Fa, Fb, t, u, v; - uint8_t sa = s >> A_SHIFT; - uint8_t da = d >> A_SHIFT; - - switch (combine & COMBINE_A) - { - default: - Fa = 0; - break; - - case COMBINE_A_OUT: - Fa = combine_disjoint_out_part (sa, da); - break; - - case COMBINE_A_IN: - Fa = combine_disjoint_in_part (sa, da); - break; - - case COMBINE_A: - Fa = MASK; - break; - } - - switch (combine & COMBINE_B) - { - default: - Fb = 0; - break; - - case COMBINE_B_OUT: - Fb = combine_disjoint_out_part (da, sa); - break; - - case COMBINE_B_IN: - Fb = combine_disjoint_in_part (da, sa); - break; - - case COMBINE_B: - Fb = MASK; - break; - } - m = GENERIC (s, d, 0, Fa, Fb, t, u, v); - n = GENERIC (s, d, G_SHIFT, Fa, Fb, t, u, v); - o = GENERIC (s, d, R_SHIFT, Fa, Fb, t, u, v); - p = GENERIC (s, d, A_SHIFT, Fa, Fb, t, u, v); - s = m | n | o | p; - *(dest + i) = s; - } -} - -static void -combine_disjoint_over_u (pixman_implementation_t *imp, - pixman_op_t op, - uint32_t * dest, - const uint32_t * src, - const uint32_t * mask, - int width) -{ - int i; - - for (i = 0; i < width; ++i) - { - uint32_t s = combine_mask (src, mask, i); - uint16_t a = s >> A_SHIFT; - - if (a != 0x00) - { - if (a != MASK) - { - uint32_t d = *(dest + i); - a = combine_disjoint_out_part (d >> A_SHIFT, a); - UN8x4_MUL_UN8_ADD_UN8x4 (d, a, s); - s = d; - } - - *(dest + i) = s; - } - } -} - -static void -combine_disjoint_in_u (pixman_implementation_t *imp, - pixman_op_t op, - uint32_t * dest, - const uint32_t * src, - const uint32_t * mask, - int width) -{ - combine_disjoint_general_u (dest, src, mask, width, COMBINE_A_IN); -} - -static void -combine_disjoint_in_reverse_u (pixman_implementation_t *imp, - pixman_op_t op, - uint32_t * dest, - const uint32_t * src, - const uint32_t * mask, - int width) -{ - combine_disjoint_general_u (dest, src, mask, width, COMBINE_B_IN); -} - -static void -combine_disjoint_out_u (pixman_implementation_t *imp, - pixman_op_t op, - uint32_t * dest, - const uint32_t * src, - const uint32_t * mask, - int width) -{ - combine_disjoint_general_u (dest, src, mask, width, COMBINE_A_OUT); -} - -static void -combine_disjoint_out_reverse_u (pixman_implementation_t *imp, - pixman_op_t op, - uint32_t * dest, - const uint32_t * src, - const uint32_t * mask, - int width) -{ - combine_disjoint_general_u (dest, src, mask, width, COMBINE_B_OUT); -} - -static void -combine_disjoint_atop_u (pixman_implementation_t *imp, - pixman_op_t op, - uint32_t * dest, - const uint32_t * src, - const uint32_t * mask, - int width) -{ - combine_disjoint_general_u (dest, src, mask, width, COMBINE_A_ATOP); -} - -static void -combine_disjoint_atop_reverse_u (pixman_implementation_t *imp, - pixman_op_t op, - uint32_t * dest, - const uint32_t * src, - const uint32_t * mask, - int width) -{ - combine_disjoint_general_u (dest, src, mask, width, COMBINE_B_ATOP); -} - -static void -combine_disjoint_xor_u (pixman_implementation_t *imp, - pixman_op_t op, - uint32_t * dest, - const uint32_t * src, - const uint32_t * mask, - int width) -{ - combine_disjoint_general_u (dest, src, mask, width, COMBINE_XOR); -} - -static void -combine_conjoint_general_u (uint32_t * dest, - const uint32_t *src, - const uint32_t *mask, - int width, - uint8_t combine) -{ - int i; - - for (i = 0; i < width; ++i) - { - uint32_t s = combine_mask (src, mask, i); - uint32_t d = *(dest + i); - uint32_t m, n, o, p; - uint16_t Fa, Fb, t, u, v; - uint8_t sa = s >> A_SHIFT; - uint8_t da = d >> A_SHIFT; - - switch (combine & COMBINE_A) - { - default: - Fa = 0; - break; - - case COMBINE_A_OUT: - Fa = combine_conjoint_out_part (sa, da); - break; - - case COMBINE_A_IN: - Fa = combine_conjoint_in_part (sa, da); - break; - - case COMBINE_A: - Fa = MASK; - break; - } - - switch (combine & COMBINE_B) - { - default: - Fb = 0; - break; - - case COMBINE_B_OUT: - Fb = combine_conjoint_out_part (da, sa); - break; - - case COMBINE_B_IN: - Fb = combine_conjoint_in_part (da, sa); - break; - - case COMBINE_B: - Fb = MASK; - break; - } - - m = GENERIC (s, d, 0, Fa, Fb, t, u, v); - n = GENERIC (s, d, G_SHIFT, Fa, Fb, t, u, v); - o = GENERIC (s, d, R_SHIFT, Fa, Fb, t, u, v); - p = GENERIC (s, d, A_SHIFT, Fa, Fb, t, u, v); - - s = m | n | o | p; - - *(dest + i) = s; - } -} - -static void -combine_conjoint_over_u (pixman_implementation_t *imp, - pixman_op_t op, - uint32_t * dest, - const uint32_t * src, - const uint32_t * mask, - int width) -{ - combine_conjoint_general_u (dest, src, mask, width, COMBINE_A_OVER); -} - -static void -combine_conjoint_over_reverse_u (pixman_implementation_t *imp, - pixman_op_t op, - uint32_t * dest, - const uint32_t * src, - const uint32_t * mask, - int width) -{ - combine_conjoint_general_u (dest, src, mask, width, COMBINE_B_OVER); -} - -static void -combine_conjoint_in_u (pixman_implementation_t *imp, - pixman_op_t op, - uint32_t * dest, - const uint32_t * src, - const uint32_t * mask, - int width) -{ - combine_conjoint_general_u (dest, src, mask, width, COMBINE_A_IN); -} - -static void -combine_conjoint_in_reverse_u (pixman_implementation_t *imp, - pixman_op_t op, - uint32_t * dest, - const uint32_t * src, - const uint32_t * mask, - int width) -{ - combine_conjoint_general_u (dest, src, mask, width, COMBINE_B_IN); -} - -static void -combine_conjoint_out_u (pixman_implementation_t *imp, - pixman_op_t op, - uint32_t * dest, - const uint32_t * src, - const uint32_t * mask, - int width) -{ - combine_conjoint_general_u (dest, src, mask, width, COMBINE_A_OUT); -} - -static void -combine_conjoint_out_reverse_u (pixman_implementation_t *imp, - pixman_op_t op, - uint32_t * dest, - const uint32_t * src, - const uint32_t * mask, - int width) -{ - combine_conjoint_general_u (dest, src, mask, width, COMBINE_B_OUT); -} - -static void -combine_conjoint_atop_u (pixman_implementation_t *imp, - pixman_op_t op, - uint32_t * dest, - const uint32_t * src, - const uint32_t * mask, - int width) -{ - combine_conjoint_general_u (dest, src, mask, width, COMBINE_A_ATOP); -} - -static void -combine_conjoint_atop_reverse_u (pixman_implementation_t *imp, - pixman_op_t op, - uint32_t * dest, - const uint32_t * src, - const uint32_t * mask, - int width) -{ - combine_conjoint_general_u (dest, src, mask, width, COMBINE_B_ATOP); -} - -static void -combine_conjoint_xor_u (pixman_implementation_t *imp, - pixman_op_t op, - uint32_t * dest, - const uint32_t * src, - const uint32_t * mask, - int width) -{ - combine_conjoint_general_u (dest, src, mask, width, COMBINE_XOR); -} - -/************************************************************************/ -/*********************** Per Channel functions **************************/ -/************************************************************************/ - -static void -combine_clear_ca (pixman_implementation_t *imp, - pixman_op_t op, - uint32_t * dest, - const uint32_t * src, - const uint32_t * mask, - int width) -{ - memset (dest, 0, width * sizeof(uint32_t)); -} - -static void -combine_src_ca (pixman_implementation_t *imp, - pixman_op_t op, - uint32_t * dest, - const uint32_t * src, - const uint32_t * mask, - int width) -{ - int i; - - for (i = 0; i < width; ++i) - { - uint32_t s = *(src + i); - uint32_t m = *(mask + i); - - combine_mask_value_ca (&s, &m); - - *(dest + i) = s; - } -} - -static void -combine_over_ca (pixman_implementation_t *imp, - pixman_op_t op, - uint32_t * dest, - const uint32_t * src, - const uint32_t * mask, - int width) -{ - int i; - - for (i = 0; i < width; ++i) - { - uint32_t s = *(src + i); - uint32_t m = *(mask + i); - uint32_t a; - - combine_mask_ca (&s, &m); - - a = ~m; - if (a) - { - uint32_t d = *(dest + i); - UN8x4_MUL_UN8x4_ADD_UN8x4 (d, a, s); - s = d; - } - - *(dest + i) = s; - } -} - -static void -combine_over_reverse_ca (pixman_implementation_t *imp, - pixman_op_t op, - uint32_t * dest, - const uint32_t * src, - const uint32_t * mask, - int width) -{ - int i; - - for (i = 0; i < width; ++i) - { - uint32_t d = *(dest + i); - uint32_t a = ~d >> A_SHIFT; - - if (a) - { - uint32_t s = *(src + i); - uint32_t m = *(mask + i); - - UN8x4_MUL_UN8x4 (s, m); - UN8x4_MUL_UN8_ADD_UN8x4 (s, a, d); - - *(dest + i) = s; - } - } -} - -static void -combine_in_ca (pixman_implementation_t *imp, - pixman_op_t op, - uint32_t * dest, - const uint32_t * src, - const uint32_t * mask, - int width) -{ - int i; - - for (i = 0; i < width; ++i) - { - uint32_t d = *(dest + i); - uint16_t a = d >> A_SHIFT; - uint32_t s = 0; - - if (a) - { - uint32_t m = *(mask + i); - - s = *(src + i); - combine_mask_value_ca (&s, &m); - - if (a != MASK) - UN8x4_MUL_UN8 (s, a); - } - - *(dest + i) = s; - } -} - -static void -combine_in_reverse_ca (pixman_implementation_t *imp, - pixman_op_t op, - uint32_t * dest, - const uint32_t * src, - const uint32_t * mask, - int width) -{ - int i; - - for (i = 0; i < width; ++i) - { - uint32_t s = *(src + i); - uint32_t m = *(mask + i); - uint32_t a; - - combine_mask_alpha_ca (&s, &m); - - a = m; - if (a != ~0) - { - uint32_t d = 0; - - if (a) - { - d = *(dest + i); - UN8x4_MUL_UN8x4 (d, a); - } - - *(dest + i) = d; - } - } -} - -static void -combine_out_ca (pixman_implementation_t *imp, - pixman_op_t op, - uint32_t * dest, - const uint32_t * src, - const uint32_t * mask, - int width) -{ - int i; - - for (i = 0; i < width; ++i) - { - uint32_t d = *(dest + i); - uint16_t a = ~d >> A_SHIFT; - uint32_t s = 0; - - if (a) - { - uint32_t m = *(mask + i); - - s = *(src + i); - combine_mask_value_ca (&s, &m); - - if (a != MASK) - UN8x4_MUL_UN8 (s, a); - } - - *(dest + i) = s; - } -} - -static void -combine_out_reverse_ca (pixman_implementation_t *imp, - pixman_op_t op, - uint32_t * dest, - const uint32_t * src, - const uint32_t * mask, - int width) -{ - int i; - - for (i = 0; i < width; ++i) - { - uint32_t s = *(src + i); - uint32_t m = *(mask + i); - uint32_t a; - - combine_mask_alpha_ca (&s, &m); - - a = ~m; - if (a != ~0) - { - uint32_t d = 0; - - if (a) - { - d = *(dest + i); - UN8x4_MUL_UN8x4 (d, a); - } - - *(dest + i) = d; - } - } -} - -static void -combine_atop_ca (pixman_implementation_t *imp, - pixman_op_t op, - uint32_t * dest, - const uint32_t * src, - const uint32_t * mask, - int width) -{ - int i; - - for (i = 0; i < width; ++i) - { - uint32_t d = *(dest + i); - uint32_t s = *(src + i); - uint32_t m = *(mask + i); - uint32_t ad; - uint16_t as = d >> A_SHIFT; - - combine_mask_ca (&s, &m); - - ad = ~m; - - UN8x4_MUL_UN8x4_ADD_UN8x4_MUL_UN8 (d, ad, s, as); - - *(dest + i) = d; - } -} - -static void -combine_atop_reverse_ca (pixman_implementation_t *imp, - pixman_op_t op, - uint32_t * dest, - const uint32_t * src, - const uint32_t * mask, - int width) -{ - int i; - - for (i = 0; i < width; ++i) - { - uint32_t d = *(dest + i); - uint32_t s = *(src + i); - uint32_t m = *(mask + i); - uint32_t ad; - uint16_t as = ~d >> A_SHIFT; - - combine_mask_ca (&s, &m); - - ad = m; - - UN8x4_MUL_UN8x4_ADD_UN8x4_MUL_UN8 (d, ad, s, as); - - *(dest + i) = d; - } -} - -static void -combine_xor_ca (pixman_implementation_t *imp, - pixman_op_t op, - uint32_t * dest, - const uint32_t * src, - const uint32_t * mask, - int width) -{ - int i; - - for (i = 0; i < width; ++i) - { - uint32_t d = *(dest + i); - uint32_t s = *(src + i); - uint32_t m = *(mask + i); - uint32_t ad; - uint16_t as = ~d >> A_SHIFT; - - combine_mask_ca (&s, &m); - - ad = ~m; - - UN8x4_MUL_UN8x4_ADD_UN8x4_MUL_UN8 (d, ad, s, as); - - *(dest + i) = d; - } -} - -static void -combine_add_ca (pixman_implementation_t *imp, - pixman_op_t op, - uint32_t * dest, - const uint32_t * src, - const uint32_t * mask, - int width) -{ - int i; - - for (i = 0; i < width; ++i) - { - uint32_t s = *(src + i); - uint32_t m = *(mask + i); - uint32_t d = *(dest + i); - - combine_mask_value_ca (&s, &m); - - UN8x4_ADD_UN8x4 (d, s); - - *(dest + i) = d; - } -} - -static void -combine_saturate_ca (pixman_implementation_t *imp, - pixman_op_t op, - uint32_t * dest, - const uint32_t * src, - const uint32_t * mask, - int width) -{ - int i; - - for (i = 0; i < width; ++i) - { - uint32_t s, d; - uint16_t sa, sr, sg, sb, da; - uint16_t t, u, v; - uint32_t m, n, o, p; - - d = *(dest + i); - s = *(src + i); - m = *(mask + i); - - combine_mask_ca (&s, &m); - - sa = (m >> A_SHIFT); - sr = (m >> R_SHIFT) & MASK; - sg = (m >> G_SHIFT) & MASK; - sb = m & MASK; - da = ~d >> A_SHIFT; - - if (sb <= da) - m = ADD (s, d, 0, t); - else - m = GENERIC (s, d, 0, (da << G_SHIFT) / sb, MASK, t, u, v); - - if (sg <= da) - n = ADD (s, d, G_SHIFT, t); - else - n = GENERIC (s, d, G_SHIFT, (da << G_SHIFT) / sg, MASK, t, u, v); - - if (sr <= da) - o = ADD (s, d, R_SHIFT, t); - else - o = GENERIC (s, d, R_SHIFT, (da << G_SHIFT) / sr, MASK, t, u, v); - - if (sa <= da) - p = ADD (s, d, A_SHIFT, t); - else - p = GENERIC (s, d, A_SHIFT, (da << G_SHIFT) / sa, MASK, t, u, v); - - *(dest + i) = m | n | o | p; - } -} - -static void -combine_disjoint_general_ca (uint32_t * dest, - const uint32_t *src, - const uint32_t *mask, - int width, - uint8_t combine) -{ - int i; - - for (i = 0; i < width; ++i) - { - uint32_t s, d; - uint32_t m, n, o, p; - uint32_t Fa, Fb; - uint16_t t, u, v; - uint32_t sa; - uint8_t da; - - s = *(src + i); - m = *(mask + i); - d = *(dest + i); - da = d >> A_SHIFT; - - combine_mask_ca (&s, &m); - - sa = m; - - switch (combine & COMBINE_A) - { - default: - Fa = 0; - break; - - case COMBINE_A_OUT: - m = (uint32_t)combine_disjoint_out_part ((uint8_t) (sa >> 0), da); - n = (uint32_t)combine_disjoint_out_part ((uint8_t) (sa >> G_SHIFT), da) << G_SHIFT; - o = (uint32_t)combine_disjoint_out_part ((uint8_t) (sa >> R_SHIFT), da) << R_SHIFT; - p = (uint32_t)combine_disjoint_out_part ((uint8_t) (sa >> A_SHIFT), da) << A_SHIFT; - Fa = m | n | o | p; - break; - - case COMBINE_A_IN: - m = (uint32_t)combine_disjoint_in_part ((uint8_t) (sa >> 0), da); - n = (uint32_t)combine_disjoint_in_part ((uint8_t) (sa >> G_SHIFT), da) << G_SHIFT; - o = (uint32_t)combine_disjoint_in_part ((uint8_t) (sa >> R_SHIFT), da) << R_SHIFT; - p = (uint32_t)combine_disjoint_in_part ((uint8_t) (sa >> A_SHIFT), da) << A_SHIFT; - Fa = m | n | o | p; - break; - - case COMBINE_A: - Fa = ~0; - break; - } - - switch (combine & COMBINE_B) - { - default: - Fb = 0; - break; - - case COMBINE_B_OUT: - m = (uint32_t)combine_disjoint_out_part (da, (uint8_t) (sa >> 0)); - n = (uint32_t)combine_disjoint_out_part (da, (uint8_t) (sa >> G_SHIFT)) << G_SHIFT; - o = (uint32_t)combine_disjoint_out_part (da, (uint8_t) (sa >> R_SHIFT)) << R_SHIFT; - p = (uint32_t)combine_disjoint_out_part (da, (uint8_t) (sa >> A_SHIFT)) << A_SHIFT; - Fb = m | n | o | p; - break; - - case COMBINE_B_IN: - m = (uint32_t)combine_disjoint_in_part (da, (uint8_t) (sa >> 0)); - n = (uint32_t)combine_disjoint_in_part (da, (uint8_t) (sa >> G_SHIFT)) << G_SHIFT; - o = (uint32_t)combine_disjoint_in_part (da, (uint8_t) (sa >> R_SHIFT)) << R_SHIFT; - p = (uint32_t)combine_disjoint_in_part (da, (uint8_t) (sa >> A_SHIFT)) << A_SHIFT; - Fb = m | n | o | p; - break; - - case COMBINE_B: - Fb = ~0; - break; - } - m = GENERIC (s, d, 0, GET_COMP (Fa, 0), GET_COMP (Fb, 0), t, u, v); - n = GENERIC (s, d, G_SHIFT, GET_COMP (Fa, G_SHIFT), GET_COMP (Fb, G_SHIFT), t, u, v); - o = GENERIC (s, d, R_SHIFT, GET_COMP (Fa, R_SHIFT), GET_COMP (Fb, R_SHIFT), t, u, v); - p = GENERIC (s, d, A_SHIFT, GET_COMP (Fa, A_SHIFT), GET_COMP (Fb, A_SHIFT), t, u, v); - - s = m | n | o | p; - - *(dest + i) = s; - } -} - -static void -combine_disjoint_over_ca (pixman_implementation_t *imp, - pixman_op_t op, - uint32_t * dest, - const uint32_t * src, - const uint32_t * mask, - int width) -{ - combine_disjoint_general_ca (dest, src, mask, width, COMBINE_A_OVER); -} - -static void -combine_disjoint_in_ca (pixman_implementation_t *imp, - pixman_op_t op, - uint32_t * dest, - const uint32_t * src, - const uint32_t * mask, - int width) -{ - combine_disjoint_general_ca (dest, src, mask, width, COMBINE_A_IN); -} - -static void -combine_disjoint_in_reverse_ca (pixman_implementation_t *imp, - pixman_op_t op, - uint32_t * dest, - const uint32_t * src, - const uint32_t * mask, - int width) -{ - combine_disjoint_general_ca (dest, src, mask, width, COMBINE_B_IN); -} - -static void -combine_disjoint_out_ca (pixman_implementation_t *imp, - pixman_op_t op, - uint32_t * dest, - const uint32_t * src, - const uint32_t * mask, - int width) -{ - combine_disjoint_general_ca (dest, src, mask, width, COMBINE_A_OUT); -} - -static void -combine_disjoint_out_reverse_ca (pixman_implementation_t *imp, - pixman_op_t op, - uint32_t * dest, - const uint32_t * src, - const uint32_t * mask, - int width) -{ - combine_disjoint_general_ca (dest, src, mask, width, COMBINE_B_OUT); -} - -static void -combine_disjoint_atop_ca (pixman_implementation_t *imp, - pixman_op_t op, - uint32_t * dest, - const uint32_t * src, - const uint32_t * mask, - int width) -{ - combine_disjoint_general_ca (dest, src, mask, width, COMBINE_A_ATOP); -} - -static void -combine_disjoint_atop_reverse_ca (pixman_implementation_t *imp, - pixman_op_t op, - uint32_t * dest, - const uint32_t * src, - const uint32_t * mask, - int width) -{ - combine_disjoint_general_ca (dest, src, mask, width, COMBINE_B_ATOP); -} - -static void -combine_disjoint_xor_ca (pixman_implementation_t *imp, - pixman_op_t op, - uint32_t * dest, - const uint32_t * src, - const uint32_t * mask, - int width) -{ - combine_disjoint_general_ca (dest, src, mask, width, COMBINE_XOR); -} - -static void -combine_conjoint_general_ca (uint32_t * dest, - const uint32_t *src, - const uint32_t *mask, - int width, - uint8_t combine) -{ - int i; - - for (i = 0; i < width; ++i) - { - uint32_t s, d; - uint32_t m, n, o, p; - uint32_t Fa, Fb; - uint16_t t, u, v; - uint32_t sa; - uint8_t da; - - s = *(src + i); - m = *(mask + i); - d = *(dest + i); - da = d >> A_SHIFT; - - combine_mask_ca (&s, &m); - - sa = m; - - switch (combine & COMBINE_A) - { - default: - Fa = 0; - break; - - case COMBINE_A_OUT: - m = (uint32_t)combine_conjoint_out_part ((uint8_t) (sa >> 0), da); - n = (uint32_t)combine_conjoint_out_part ((uint8_t) (sa >> G_SHIFT), da) << G_SHIFT; - o = (uint32_t)combine_conjoint_out_part ((uint8_t) (sa >> R_SHIFT), da) << R_SHIFT; - p = (uint32_t)combine_conjoint_out_part ((uint8_t) (sa >> A_SHIFT), da) << A_SHIFT; - Fa = m | n | o | p; - break; - - case COMBINE_A_IN: - m = (uint32_t)combine_conjoint_in_part ((uint8_t) (sa >> 0), da); - n = (uint32_t)combine_conjoint_in_part ((uint8_t) (sa >> G_SHIFT), da) << G_SHIFT; - o = (uint32_t)combine_conjoint_in_part ((uint8_t) (sa >> R_SHIFT), da) << R_SHIFT; - p = (uint32_t)combine_conjoint_in_part ((uint8_t) (sa >> A_SHIFT), da) << A_SHIFT; - Fa = m | n | o | p; - break; - - case COMBINE_A: - Fa = ~0; - break; - } - - switch (combine & COMBINE_B) - { - default: - Fb = 0; - break; - - case COMBINE_B_OUT: - m = (uint32_t)combine_conjoint_out_part (da, (uint8_t) (sa >> 0)); - n = (uint32_t)combine_conjoint_out_part (da, (uint8_t) (sa >> G_SHIFT)) << G_SHIFT; - o = (uint32_t)combine_conjoint_out_part (da, (uint8_t) (sa >> R_SHIFT)) << R_SHIFT; - p = (uint32_t)combine_conjoint_out_part (da, (uint8_t) (sa >> A_SHIFT)) << A_SHIFT; - Fb = m | n | o | p; - break; - - case COMBINE_B_IN: - m = (uint32_t)combine_conjoint_in_part (da, (uint8_t) (sa >> 0)); - n = (uint32_t)combine_conjoint_in_part (da, (uint8_t) (sa >> G_SHIFT)) << G_SHIFT; - o = (uint32_t)combine_conjoint_in_part (da, (uint8_t) (sa >> R_SHIFT)) << R_SHIFT; - p = (uint32_t)combine_conjoint_in_part (da, (uint8_t) (sa >> A_SHIFT)) << A_SHIFT; - Fb = m | n | o | p; - break; - - case COMBINE_B: - Fb = ~0; - break; - } - m = GENERIC (s, d, 0, GET_COMP (Fa, 0), GET_COMP (Fb, 0), t, u, v); - n = GENERIC (s, d, G_SHIFT, GET_COMP (Fa, G_SHIFT), GET_COMP (Fb, G_SHIFT), t, u, v); - o = GENERIC (s, d, R_SHIFT, GET_COMP (Fa, R_SHIFT), GET_COMP (Fb, R_SHIFT), t, u, v); - p = GENERIC (s, d, A_SHIFT, GET_COMP (Fa, A_SHIFT), GET_COMP (Fb, A_SHIFT), t, u, v); - - s = m | n | o | p; - - *(dest + i) = s; - } -} - -static void -combine_conjoint_over_ca (pixman_implementation_t *imp, - pixman_op_t op, - uint32_t * dest, - const uint32_t * src, - const uint32_t * mask, - int width) -{ - combine_conjoint_general_ca (dest, src, mask, width, COMBINE_A_OVER); -} - -static void -combine_conjoint_over_reverse_ca (pixman_implementation_t *imp, - pixman_op_t op, - uint32_t * dest, - const uint32_t * src, - const uint32_t * mask, - int width) -{ - combine_conjoint_general_ca (dest, src, mask, width, COMBINE_B_OVER); -} - -static void -combine_conjoint_in_ca (pixman_implementation_t *imp, - pixman_op_t op, - uint32_t * dest, - const uint32_t * src, - const uint32_t * mask, - int width) -{ - combine_conjoint_general_ca (dest, src, mask, width, COMBINE_A_IN); -} - -static void -combine_conjoint_in_reverse_ca (pixman_implementation_t *imp, - pixman_op_t op, - uint32_t * dest, - const uint32_t * src, - const uint32_t * mask, - int width) -{ - combine_conjoint_general_ca (dest, src, mask, width, COMBINE_B_IN); -} - -static void -combine_conjoint_out_ca (pixman_implementation_t *imp, - pixman_op_t op, - uint32_t * dest, - const uint32_t * src, - const uint32_t * mask, - int width) -{ - combine_conjoint_general_ca (dest, src, mask, width, COMBINE_A_OUT); -} - -static void -combine_conjoint_out_reverse_ca (pixman_implementation_t *imp, - pixman_op_t op, - uint32_t * dest, - const uint32_t * src, - const uint32_t * mask, - int width) -{ - combine_conjoint_general_ca (dest, src, mask, width, COMBINE_B_OUT); -} - -static void -combine_conjoint_atop_ca (pixman_implementation_t *imp, - pixman_op_t op, - uint32_t * dest, - const uint32_t * src, - const uint32_t * mask, - int width) -{ - combine_conjoint_general_ca (dest, src, mask, width, COMBINE_A_ATOP); -} - -static void -combine_conjoint_atop_reverse_ca (pixman_implementation_t *imp, - pixman_op_t op, - uint32_t * dest, - const uint32_t * src, - const uint32_t * mask, - int width) -{ - combine_conjoint_general_ca (dest, src, mask, width, COMBINE_B_ATOP); -} - -static void -combine_conjoint_xor_ca (pixman_implementation_t *imp, - pixman_op_t op, - uint32_t * dest, - const uint32_t * src, - const uint32_t * mask, - int width) -{ - combine_conjoint_general_ca (dest, src, mask, width, COMBINE_XOR); -} - -void -_pixman_setup_combiner_functions_32 (pixman_implementation_t *imp) -{ - /* Unified alpha */ - imp->combine_32[PIXMAN_OP_CLEAR] = combine_clear; - imp->combine_32[PIXMAN_OP_SRC] = combine_src_u; - /* dest */ - imp->combine_32[PIXMAN_OP_OVER] = combine_over_u; - imp->combine_32[PIXMAN_OP_OVER_REVERSE] = combine_over_reverse_u; - imp->combine_32[PIXMAN_OP_IN] = combine_in_u; - imp->combine_32[PIXMAN_OP_IN_REVERSE] = combine_in_reverse_u; - imp->combine_32[PIXMAN_OP_OUT] = combine_out_u; - imp->combine_32[PIXMAN_OP_OUT_REVERSE] = combine_out_reverse_u; - imp->combine_32[PIXMAN_OP_ATOP] = combine_atop_u; - imp->combine_32[PIXMAN_OP_ATOP_REVERSE] = combine_atop_reverse_u; - imp->combine_32[PIXMAN_OP_XOR] = combine_xor_u; - imp->combine_32[PIXMAN_OP_ADD] = combine_add_u; - imp->combine_32[PIXMAN_OP_SATURATE] = combine_saturate_u; - - /* Disjoint, unified */ - imp->combine_32[PIXMAN_OP_DISJOINT_CLEAR] = combine_clear; - imp->combine_32[PIXMAN_OP_DISJOINT_SRC] = combine_src_u; - /* dest */ - imp->combine_32[PIXMAN_OP_DISJOINT_OVER] = combine_disjoint_over_u; - imp->combine_32[PIXMAN_OP_DISJOINT_OVER_REVERSE] = combine_saturate_u; - imp->combine_32[PIXMAN_OP_DISJOINT_IN] = combine_disjoint_in_u; - imp->combine_32[PIXMAN_OP_DISJOINT_IN_REVERSE] = combine_disjoint_in_reverse_u; - imp->combine_32[PIXMAN_OP_DISJOINT_OUT] = combine_disjoint_out_u; - imp->combine_32[PIXMAN_OP_DISJOINT_OUT_REVERSE] = combine_disjoint_out_reverse_u; - imp->combine_32[PIXMAN_OP_DISJOINT_ATOP] = combine_disjoint_atop_u; - imp->combine_32[PIXMAN_OP_DISJOINT_ATOP_REVERSE] = combine_disjoint_atop_reverse_u; - imp->combine_32[PIXMAN_OP_DISJOINT_XOR] = combine_disjoint_xor_u; - - /* Conjoint, unified */ - imp->combine_32[PIXMAN_OP_CONJOINT_CLEAR] = combine_clear; - imp->combine_32[PIXMAN_OP_CONJOINT_SRC] = combine_src_u; - /* dest */ - imp->combine_32[PIXMAN_OP_CONJOINT_OVER] = combine_conjoint_over_u; - imp->combine_32[PIXMAN_OP_CONJOINT_OVER_REVERSE] = combine_conjoint_over_reverse_u; - imp->combine_32[PIXMAN_OP_CONJOINT_IN] = combine_conjoint_in_u; - imp->combine_32[PIXMAN_OP_CONJOINT_IN_REVERSE] = combine_conjoint_in_reverse_u; - imp->combine_32[PIXMAN_OP_CONJOINT_OUT] = combine_conjoint_out_u; - imp->combine_32[PIXMAN_OP_CONJOINT_OUT_REVERSE] = combine_conjoint_out_reverse_u; - imp->combine_32[PIXMAN_OP_CONJOINT_ATOP] = combine_conjoint_atop_u; - imp->combine_32[PIXMAN_OP_CONJOINT_ATOP_REVERSE] = combine_conjoint_atop_reverse_u; - imp->combine_32[PIXMAN_OP_CONJOINT_XOR] = combine_conjoint_xor_u; - - imp->combine_32[PIXMAN_OP_MULTIPLY] = combine_multiply_u; - imp->combine_32[PIXMAN_OP_SCREEN] = combine_screen_u; - imp->combine_32[PIXMAN_OP_OVERLAY] = combine_overlay_u; - imp->combine_32[PIXMAN_OP_DARKEN] = combine_darken_u; - imp->combine_32[PIXMAN_OP_LIGHTEN] = combine_lighten_u; - imp->combine_32[PIXMAN_OP_COLOR_DODGE] = combine_color_dodge_u; - imp->combine_32[PIXMAN_OP_COLOR_BURN] = combine_color_burn_u; - imp->combine_32[PIXMAN_OP_HARD_LIGHT] = combine_hard_light_u; - imp->combine_32[PIXMAN_OP_SOFT_LIGHT] = combine_soft_light_u; - imp->combine_32[PIXMAN_OP_DIFFERENCE] = combine_difference_u; - imp->combine_32[PIXMAN_OP_EXCLUSION] = combine_exclusion_u; - imp->combine_32[PIXMAN_OP_HSL_HUE] = combine_hsl_hue_u; - imp->combine_32[PIXMAN_OP_HSL_SATURATION] = combine_hsl_saturation_u; - imp->combine_32[PIXMAN_OP_HSL_COLOR] = combine_hsl_color_u; - imp->combine_32[PIXMAN_OP_HSL_LUMINOSITY] = combine_hsl_luminosity_u; - - /* Component alpha combiners */ - imp->combine_32_ca[PIXMAN_OP_CLEAR] = combine_clear_ca; - imp->combine_32_ca[PIXMAN_OP_SRC] = combine_src_ca; - /* dest */ - imp->combine_32_ca[PIXMAN_OP_OVER] = combine_over_ca; - imp->combine_32_ca[PIXMAN_OP_OVER_REVERSE] = combine_over_reverse_ca; - imp->combine_32_ca[PIXMAN_OP_IN] = combine_in_ca; - imp->combine_32_ca[PIXMAN_OP_IN_REVERSE] = combine_in_reverse_ca; - imp->combine_32_ca[PIXMAN_OP_OUT] = combine_out_ca; - imp->combine_32_ca[PIXMAN_OP_OUT_REVERSE] = combine_out_reverse_ca; - imp->combine_32_ca[PIXMAN_OP_ATOP] = combine_atop_ca; - imp->combine_32_ca[PIXMAN_OP_ATOP_REVERSE] = combine_atop_reverse_ca; - imp->combine_32_ca[PIXMAN_OP_XOR] = combine_xor_ca; - imp->combine_32_ca[PIXMAN_OP_ADD] = combine_add_ca; - imp->combine_32_ca[PIXMAN_OP_SATURATE] = combine_saturate_ca; - - /* Disjoint CA */ - imp->combine_32_ca[PIXMAN_OP_DISJOINT_CLEAR] = combine_clear_ca; - imp->combine_32_ca[PIXMAN_OP_DISJOINT_SRC] = combine_src_ca; - /* dest */ - imp->combine_32_ca[PIXMAN_OP_DISJOINT_OVER] = combine_disjoint_over_ca; - imp->combine_32_ca[PIXMAN_OP_DISJOINT_OVER_REVERSE] = combine_saturate_ca; - imp->combine_32_ca[PIXMAN_OP_DISJOINT_IN] = combine_disjoint_in_ca; - imp->combine_32_ca[PIXMAN_OP_DISJOINT_IN_REVERSE] = combine_disjoint_in_reverse_ca; - imp->combine_32_ca[PIXMAN_OP_DISJOINT_OUT] = combine_disjoint_out_ca; - imp->combine_32_ca[PIXMAN_OP_DISJOINT_OUT_REVERSE] = combine_disjoint_out_reverse_ca; - imp->combine_32_ca[PIXMAN_OP_DISJOINT_ATOP] = combine_disjoint_atop_ca; - imp->combine_32_ca[PIXMAN_OP_DISJOINT_ATOP_REVERSE] = combine_disjoint_atop_reverse_ca; - imp->combine_32_ca[PIXMAN_OP_DISJOINT_XOR] = combine_disjoint_xor_ca; - - /* Conjoint CA */ - imp->combine_32_ca[PIXMAN_OP_CONJOINT_CLEAR] = combine_clear_ca; - imp->combine_32_ca[PIXMAN_OP_CONJOINT_SRC] = combine_src_ca; - /* dest */ - imp->combine_32_ca[PIXMAN_OP_CONJOINT_OVER] = combine_conjoint_over_ca; - imp->combine_32_ca[PIXMAN_OP_CONJOINT_OVER_REVERSE] = combine_conjoint_over_reverse_ca; - imp->combine_32_ca[PIXMAN_OP_CONJOINT_IN] = combine_conjoint_in_ca; - imp->combine_32_ca[PIXMAN_OP_CONJOINT_IN_REVERSE] = combine_conjoint_in_reverse_ca; - imp->combine_32_ca[PIXMAN_OP_CONJOINT_OUT] = combine_conjoint_out_ca; - imp->combine_32_ca[PIXMAN_OP_CONJOINT_OUT_REVERSE] = combine_conjoint_out_reverse_ca; - imp->combine_32_ca[PIXMAN_OP_CONJOINT_ATOP] = combine_conjoint_atop_ca; - imp->combine_32_ca[PIXMAN_OP_CONJOINT_ATOP_REVERSE] = combine_conjoint_atop_reverse_ca; - imp->combine_32_ca[PIXMAN_OP_CONJOINT_XOR] = combine_conjoint_xor_ca; - - imp->combine_32_ca[PIXMAN_OP_MULTIPLY] = combine_multiply_ca; - imp->combine_32_ca[PIXMAN_OP_SCREEN] = combine_screen_ca; - imp->combine_32_ca[PIXMAN_OP_OVERLAY] = combine_overlay_ca; - imp->combine_32_ca[PIXMAN_OP_DARKEN] = combine_darken_ca; - imp->combine_32_ca[PIXMAN_OP_LIGHTEN] = combine_lighten_ca; - imp->combine_32_ca[PIXMAN_OP_COLOR_DODGE] = combine_color_dodge_ca; - imp->combine_32_ca[PIXMAN_OP_COLOR_BURN] = combine_color_burn_ca; - imp->combine_32_ca[PIXMAN_OP_HARD_LIGHT] = combine_hard_light_ca; - imp->combine_32_ca[PIXMAN_OP_SOFT_LIGHT] = combine_soft_light_ca; - imp->combine_32_ca[PIXMAN_OP_DIFFERENCE] = combine_difference_ca; - imp->combine_32_ca[PIXMAN_OP_EXCLUSION] = combine_exclusion_ca; - - /* It is not clear that these make sense, so leave them out for now */ - imp->combine_32_ca[PIXMAN_OP_HSL_HUE] = NULL; - imp->combine_32_ca[PIXMAN_OP_HSL_SATURATION] = NULL; - imp->combine_32_ca[PIXMAN_OP_HSL_COLOR] = NULL; - imp->combine_32_ca[PIXMAN_OP_HSL_LUMINOSITY] = NULL; -} - diff --git a/pixman/pixman/pixman-combine32.h b/pixman/pixman/pixman-combine32.h deleted file mode 100644 index 4c2f4cdf0..000000000 --- a/pixman/pixman/pixman-combine32.h +++ /dev/null @@ -1,230 +0,0 @@ -/* WARNING: This file is generated by combine.pl from combine.inc. - Please edit one of those files rather than this one. */ - -#line 1 "pixman-combine.c.template" - -#define COMPONENT_SIZE 8 -#define MASK 0xff -#define ONE_HALF 0x80 - -#define A_SHIFT 8 * 3 -#define R_SHIFT 8 * 2 -#define G_SHIFT 8 -#define A_MASK 0xff000000 -#define R_MASK 0xff0000 -#define G_MASK 0xff00 - -#define RB_MASK 0xff00ff -#define AG_MASK 0xff00ff00 -#define RB_ONE_HALF 0x800080 -#define RB_MASK_PLUS_ONE 0x10000100 - -#define ALPHA_8(x) ((x) >> A_SHIFT) -#define RED_8(x) (((x) >> R_SHIFT) & MASK) -#define GREEN_8(x) (((x) >> G_SHIFT) & MASK) -#define BLUE_8(x) ((x) & MASK) - -/* - * Helper macros. - */ - -#define MUL_UN8(a, b, t) \ - ((t) = (a) * (b) + ONE_HALF, ((((t) >> G_SHIFT ) + (t) ) >> G_SHIFT )) - -#define DIV_UN8(a, b) \ - (((uint16_t) (a) * MASK) / (b)) - -#define ADD_UN8(x, y, t) \ - ((t) = x + y, \ - (uint32_t) (uint8_t) ((t) | (0 - ((t) >> G_SHIFT)))) - -#define DIV_ONE_UN8(x) \ - (((x) + ONE_HALF + (((x) + ONE_HALF) >> G_SHIFT)) >> G_SHIFT) - -/* - * The methods below use some tricks to be able to do two color - * components at the same time. - */ - -/* - * x_rb = (x_rb * a) / 255 - */ -#define UN8_rb_MUL_UN8(x, a, t) \ - do \ - { \ - t = ((x) & RB_MASK) * (a); \ - t += RB_ONE_HALF; \ - x = (t + ((t >> G_SHIFT) & RB_MASK)) >> G_SHIFT; \ - x &= RB_MASK; \ - } while (0) - -/* - * x_rb = min (x_rb + y_rb, 255) - */ -#define UN8_rb_ADD_UN8_rb(x, y, t) \ - do \ - { \ - t = ((x) + (y)); \ - t |= RB_MASK_PLUS_ONE - ((t >> G_SHIFT) & RB_MASK); \ - x = (t & RB_MASK); \ - } while (0) - -/* - * x_rb = (x_rb * a_rb) / 255 - */ -#define UN8_rb_MUL_UN8_rb(x, a, t) \ - do \ - { \ - t = (x & MASK) * (a & MASK); \ - t |= (x & R_MASK) * ((a >> R_SHIFT) & MASK); \ - t += RB_ONE_HALF; \ - t = (t + ((t >> G_SHIFT) & RB_MASK)) >> G_SHIFT; \ - x = t & RB_MASK; \ - } while (0) - -/* - * x_c = (x_c * a) / 255 - */ -#define UN8x4_MUL_UN8(x, a) \ - do \ - { \ - uint32_t r1, r2, t; \ - \ - r1 = (x); \ - UN8_rb_MUL_UN8 (r1, a, t); \ - \ - r2 = (x) >> G_SHIFT; \ - UN8_rb_MUL_UN8 (r2, a, t); \ - \ - x = r1 | (r2 << G_SHIFT); \ - } while (0) - -/* - * x_c = (x_c * a) / 255 + y_c - */ -#define UN8x4_MUL_UN8_ADD_UN8x4(x, a, y) \ - do \ - { \ - uint32_t r1, r2, r3, t; \ - \ - r1 = (x); \ - r2 = (y) & RB_MASK; \ - UN8_rb_MUL_UN8 (r1, a, t); \ - UN8_rb_ADD_UN8_rb (r1, r2, t); \ - \ - r2 = (x) >> G_SHIFT; \ - r3 = ((y) >> G_SHIFT) & RB_MASK; \ - UN8_rb_MUL_UN8 (r2, a, t); \ - UN8_rb_ADD_UN8_rb (r2, r3, t); \ - \ - x = r1 | (r2 << G_SHIFT); \ - } while (0) - -/* - * x_c = (x_c * a + y_c * b) / 255 - */ -#define UN8x4_MUL_UN8_ADD_UN8x4_MUL_UN8(x, a, y, b) \ - do \ - { \ - uint32_t r1, r2, r3, t; \ - \ - r1 = x; \ - r2 = y; \ - UN8_rb_MUL_UN8 (r1, a, t); \ - UN8_rb_MUL_UN8 (r2, b, t); \ - UN8_rb_ADD_UN8_rb (r1, r2, t); \ - \ - r2 = (x >> G_SHIFT); \ - r3 = (y >> G_SHIFT); \ - UN8_rb_MUL_UN8 (r2, a, t); \ - UN8_rb_MUL_UN8 (r3, b, t); \ - UN8_rb_ADD_UN8_rb (r2, r3, t); \ - \ - x = r1 | (r2 << G_SHIFT); \ - } while (0) - -/* - * x_c = (x_c * a_c) / 255 - */ -#define UN8x4_MUL_UN8x4(x, a) \ - do \ - { \ - uint32_t r1, r2, r3, t; \ - \ - r1 = x; \ - r2 = a; \ - UN8_rb_MUL_UN8_rb (r1, r2, t); \ - \ - r2 = x >> G_SHIFT; \ - r3 = a >> G_SHIFT; \ - UN8_rb_MUL_UN8_rb (r2, r3, t); \ - \ - x = r1 | (r2 << G_SHIFT); \ - } while (0) - -/* - * x_c = (x_c * a_c) / 255 + y_c - */ -#define UN8x4_MUL_UN8x4_ADD_UN8x4(x, a, y) \ - do \ - { \ - uint32_t r1, r2, r3, t; \ - \ - r1 = x; \ - r2 = a; \ - UN8_rb_MUL_UN8_rb (r1, r2, t); \ - r2 = y & RB_MASK; \ - UN8_rb_ADD_UN8_rb (r1, r2, t); \ - \ - r2 = (x >> G_SHIFT); \ - r3 = (a >> G_SHIFT); \ - UN8_rb_MUL_UN8_rb (r2, r3, t); \ - r3 = (y >> G_SHIFT) & RB_MASK; \ - UN8_rb_ADD_UN8_rb (r2, r3, t); \ - \ - x = r1 | (r2 << G_SHIFT); \ - } while (0) - -/* - * x_c = (x_c * a_c + y_c * b) / 255 - */ -#define UN8x4_MUL_UN8x4_ADD_UN8x4_MUL_UN8(x, a, y, b) \ - do \ - { \ - uint32_t r1, r2, r3, t; \ - \ - r1 = x; \ - r2 = a; \ - UN8_rb_MUL_UN8_rb (r1, r2, t); \ - r2 = y; \ - UN8_rb_MUL_UN8 (r2, b, t); \ - UN8_rb_ADD_UN8_rb (r1, r2, t); \ - \ - r2 = x >> G_SHIFT; \ - r3 = a >> G_SHIFT; \ - UN8_rb_MUL_UN8_rb (r2, r3, t); \ - r3 = y >> G_SHIFT; \ - UN8_rb_MUL_UN8 (r3, b, t); \ - UN8_rb_ADD_UN8_rb (r2, r3, t); \ - \ - x = r1 | (r2 << G_SHIFT); \ - } while (0) - -/* - x_c = min(x_c + y_c, 255) - */ -#define UN8x4_ADD_UN8x4(x, y) \ - do \ - { \ - uint32_t r1, r2, r3, t; \ - \ - r1 = x & RB_MASK; \ - r2 = y & RB_MASK; \ - UN8_rb_ADD_UN8_rb (r1, r2, t); \ - \ - r2 = (x >> G_SHIFT) & RB_MASK; \ - r3 = (y >> G_SHIFT) & RB_MASK; \ - UN8_rb_ADD_UN8_rb (r2, r3, t); \ - \ - x = r1 | (r2 << G_SHIFT); \ - } while (0) diff --git a/pixman/pixman/pixman-combine64.c b/pixman/pixman/pixman-combine64.c deleted file mode 100644 index 03e271b95..000000000 --- a/pixman/pixman/pixman-combine64.c +++ /dev/null @@ -1,2440 +0,0 @@ -/* WARNING: This file is generated by combine.pl from combine.inc. - Please edit one of those files rather than this one. */ - -#line 1 "pixman-combine.c.template" -#ifdef HAVE_CONFIG_H -#include <config.h> -#endif - -#include <math.h> -#include <string.h> - -#include "pixman-private.h" - -#include "pixman-combine64.h" - -/*** per channel helper functions ***/ - -static void -combine_mask_ca (uint64_t *src, uint64_t *mask) -{ - uint64_t a = *mask; - - uint64_t x; - uint32_t xa; - - if (!a) - { - *(src) = 0; - return; - } - - x = *(src); - if (a == ~0) - { - x = x >> A_SHIFT; - x |= x << G_SHIFT; - x |= x << R_SHIFT; - *(mask) = x; - return; - } - - xa = x >> A_SHIFT; - UN16x4_MUL_UN16x4 (x, a); - *(src) = x; - - UN16x4_MUL_UN16 (a, xa); - *(mask) = a; -} - -static void -combine_mask_value_ca (uint64_t *src, const uint64_t *mask) -{ - uint64_t a = *mask; - uint64_t x; - - if (!a) - { - *(src) = 0; - return; - } - - if (a == ~0) - return; - - x = *(src); - UN16x4_MUL_UN16x4 (x, a); - *(src) = x; -} - -static void -combine_mask_alpha_ca (const uint64_t *src, uint64_t *mask) -{ - uint64_t a = *(mask); - uint64_t x; - - if (!a) - return; - - x = *(src) >> A_SHIFT; - if (x == MASK) - return; - - if (a == ~0) - { - x |= x << G_SHIFT; - x |= x << R_SHIFT; - *(mask) = x; - return; - } - - UN16x4_MUL_UN16 (a, x); - *(mask) = a; -} - -/* - * There are two ways of handling alpha -- either as a single unified value or - * a separate value for each component, hence each macro must have two - * versions. The unified alpha version has a 'U' at the end of the name, - * the component version has a 'C'. Similarly, functions which deal with - * this difference will have two versions using the same convention. - */ - -/* - * All of the composing functions - */ - -static force_inline uint64_t -combine_mask (const uint64_t *src, const uint64_t *mask, int i) -{ - uint64_t s, m; - - if (mask) - { - m = *(mask + i) >> A_SHIFT; - - if (!m) - return 0; - } - - s = *(src + i); - - if (mask) - UN16x4_MUL_UN16 (s, m); - - return s; -} - -static void -combine_clear (pixman_implementation_t *imp, - pixman_op_t op, - uint64_t * dest, - const uint64_t * src, - const uint64_t * mask, - int width) -{ - memset (dest, 0, width * sizeof(uint64_t)); -} - -static void -combine_src_u (pixman_implementation_t *imp, - pixman_op_t op, - uint64_t * dest, - const uint64_t * src, - const uint64_t * mask, - int width) -{ - int i; - - if (!mask) - memcpy (dest, src, width * sizeof (uint64_t)); - else - { - for (i = 0; i < width; ++i) - { - uint64_t s = combine_mask (src, mask, i); - - *(dest + i) = s; - } - } -} - -/* if the Src is opaque, call combine_src_u */ -static void -combine_over_u (pixman_implementation_t *imp, - pixman_op_t op, - uint64_t * dest, - const uint64_t * src, - const uint64_t * mask, - int width) -{ - int i; - - for (i = 0; i < width; ++i) - { - uint64_t s = combine_mask (src, mask, i); - uint64_t d = *(dest + i); - uint64_t ia = ALPHA_16 (~s); - - UN16x4_MUL_UN16_ADD_UN16x4 (d, ia, s); - *(dest + i) = d; - } -} - -/* if the Dst is opaque, this is a noop */ -static void -combine_over_reverse_u (pixman_implementation_t *imp, - pixman_op_t op, - uint64_t * dest, - const uint64_t * src, - const uint64_t * mask, - int width) -{ - int i; - - for (i = 0; i < width; ++i) - { - uint64_t s = combine_mask (src, mask, i); - uint64_t d = *(dest + i); - uint64_t ia = ALPHA_16 (~*(dest + i)); - UN16x4_MUL_UN16_ADD_UN16x4 (s, ia, d); - *(dest + i) = s; - } -} - -/* if the Dst is opaque, call combine_src_u */ -static void -combine_in_u (pixman_implementation_t *imp, - pixman_op_t op, - uint64_t * dest, - const uint64_t * src, - const uint64_t * mask, - int width) -{ - int i; - - for (i = 0; i < width; ++i) - { - uint64_t s = combine_mask (src, mask, i); - uint64_t a = ALPHA_16 (*(dest + i)); - UN16x4_MUL_UN16 (s, a); - *(dest + i) = s; - } -} - -/* if the Src is opaque, this is a noop */ -static void -combine_in_reverse_u (pixman_implementation_t *imp, - pixman_op_t op, - uint64_t * dest, - const uint64_t * src, - const uint64_t * mask, - int width) -{ - int i; - - for (i = 0; i < width; ++i) - { - uint64_t s = combine_mask (src, mask, i); - uint64_t d = *(dest + i); - uint64_t a = ALPHA_16 (s); - UN16x4_MUL_UN16 (d, a); - *(dest + i) = d; - } -} - -/* if the Dst is opaque, call combine_clear */ -static void -combine_out_u (pixman_implementation_t *imp, - pixman_op_t op, - uint64_t * dest, - const uint64_t * src, - const uint64_t * mask, - int width) -{ - int i; - - for (i = 0; i < width; ++i) - { - uint64_t s = combine_mask (src, mask, i); - uint64_t a = ALPHA_16 (~*(dest + i)); - UN16x4_MUL_UN16 (s, a); - *(dest + i) = s; - } -} - -/* if the Src is opaque, call combine_clear */ -static void -combine_out_reverse_u (pixman_implementation_t *imp, - pixman_op_t op, - uint64_t * dest, - const uint64_t * src, - const uint64_t * mask, - int width) -{ - int i; - - for (i = 0; i < width; ++i) - { - uint64_t s = combine_mask (src, mask, i); - uint64_t d = *(dest + i); - uint64_t a = ALPHA_16 (~s); - UN16x4_MUL_UN16 (d, a); - *(dest + i) = d; - } -} - -/* if the Src is opaque, call combine_in_u */ -/* if the Dst is opaque, call combine_over_u */ -/* if both the Src and Dst are opaque, call combine_src_u */ -static void -combine_atop_u (pixman_implementation_t *imp, - pixman_op_t op, - uint64_t * dest, - const uint64_t * src, - const uint64_t * mask, - int width) -{ - int i; - - for (i = 0; i < width; ++i) - { - uint64_t s = combine_mask (src, mask, i); - uint64_t d = *(dest + i); - uint64_t dest_a = ALPHA_16 (d); - uint64_t src_ia = ALPHA_16 (~s); - - UN16x4_MUL_UN16_ADD_UN16x4_MUL_UN16 (s, dest_a, d, src_ia); - *(dest + i) = s; - } -} - -/* if the Src is opaque, call combine_over_reverse_u */ -/* if the Dst is opaque, call combine_in_reverse_u */ -/* if both the Src and Dst are opaque, call combine_dst_u */ -static void -combine_atop_reverse_u (pixman_implementation_t *imp, - pixman_op_t op, - uint64_t * dest, - const uint64_t * src, - const uint64_t * mask, - int width) -{ - int i; - - for (i = 0; i < width; ++i) - { - uint64_t s = combine_mask (src, mask, i); - uint64_t d = *(dest + i); - uint64_t src_a = ALPHA_16 (s); - uint64_t dest_ia = ALPHA_16 (~d); - - UN16x4_MUL_UN16_ADD_UN16x4_MUL_UN16 (s, dest_ia, d, src_a); - *(dest + i) = s; - } -} - -/* if the Src is opaque, call combine_over_u */ -/* if the Dst is opaque, call combine_over_reverse_u */ -/* if both the Src and Dst are opaque, call combine_clear */ -static void -combine_xor_u (pixman_implementation_t *imp, - pixman_op_t op, - uint64_t * dest, - const uint64_t * src, - const uint64_t * mask, - int width) -{ - int i; - - for (i = 0; i < width; ++i) - { - uint64_t s = combine_mask (src, mask, i); - uint64_t d = *(dest + i); - uint64_t src_ia = ALPHA_16 (~s); - uint64_t dest_ia = ALPHA_16 (~d); - - UN16x4_MUL_UN16_ADD_UN16x4_MUL_UN16 (s, dest_ia, d, src_ia); - *(dest + i) = s; - } -} - -static void -combine_add_u (pixman_implementation_t *imp, - pixman_op_t op, - uint64_t * dest, - const uint64_t * src, - const uint64_t * mask, - int width) -{ - int i; - - for (i = 0; i < width; ++i) - { - uint64_t s = combine_mask (src, mask, i); - uint64_t d = *(dest + i); - UN16x4_ADD_UN16x4 (d, s); - *(dest + i) = d; - } -} - -/* if the Src is opaque, call combine_add_u */ -/* if the Dst is opaque, call combine_add_u */ -/* if both the Src and Dst are opaque, call combine_add_u */ -static void -combine_saturate_u (pixman_implementation_t *imp, - pixman_op_t op, - uint64_t * dest, - const uint64_t * src, - const uint64_t * mask, - int width) -{ - int i; - - for (i = 0; i < width; ++i) - { - uint64_t s = combine_mask (src, mask, i); - uint64_t d = *(dest + i); - uint32_t sa, da; - - sa = s >> A_SHIFT; - da = ~d >> A_SHIFT; - if (sa > da) - { - sa = DIV_UN16 (da, sa); - UN16x4_MUL_UN16 (s, sa); - } - ; - UN16x4_ADD_UN16x4 (d, s); - *(dest + i) = d; - } -} - -/* - * PDF blend modes: - * The following blend modes have been taken from the PDF ISO 32000 - * specification, which at this point in time is available from - * http://www.adobe.com/devnet/acrobat/pdfs/PDF32000_2008.pdf - * The relevant chapters are 11.3.5 and 11.3.6. - * The formula for computing the final pixel color given in 11.3.6 is: - * αr × Cr = (1 – αs) × αb × Cb + (1 – αb) × αs × Cs + αb × αs × B(Cb, Cs) - * with B() being the blend function. - * Note that OVER is a special case of this operation, using B(Cb, Cs) = Cs - * - * These blend modes should match the SVG filter draft specification, as - * it has been designed to mirror ISO 32000. Note that at the current point - * no released draft exists that shows this, as the formulas have not been - * updated yet after the release of ISO 32000. - * - * The default implementation here uses the PDF_SEPARABLE_BLEND_MODE and - * PDF_NON_SEPARABLE_BLEND_MODE macros, which take the blend function as an - * argument. Note that this implementation operates on premultiplied colors, - * while the PDF specification does not. Therefore the code uses the formula - * ar.Cra = (1 – as) . Dca + (1 – ad) . Sca + B(Dca, ad, Sca, as) - */ - -/* - * Multiply - * B(Dca, ad, Sca, as) = Dca.Sca - */ - -static void -combine_multiply_u (pixman_implementation_t *imp, - pixman_op_t op, - uint64_t * dest, - const uint64_t * src, - const uint64_t * mask, - int width) -{ - int i; - - for (i = 0; i < width; ++i) - { - uint64_t s = combine_mask (src, mask, i); - uint64_t d = *(dest + i); - uint64_t ss = s; - uint64_t src_ia = ALPHA_16 (~s); - uint64_t dest_ia = ALPHA_16 (~d); - - UN16x4_MUL_UN16_ADD_UN16x4_MUL_UN16 (ss, dest_ia, d, src_ia); - UN16x4_MUL_UN16x4 (d, s); - UN16x4_ADD_UN16x4 (d, ss); - - *(dest + i) = d; - } -} - -static void -combine_multiply_ca (pixman_implementation_t *imp, - pixman_op_t op, - uint64_t * dest, - const uint64_t * src, - const uint64_t * mask, - int width) -{ - int i; - - for (i = 0; i < width; ++i) - { - uint64_t m = *(mask + i); - uint64_t s = *(src + i); - uint64_t d = *(dest + i); - uint64_t r = d; - uint64_t dest_ia = ALPHA_16 (~d); - - combine_mask_value_ca (&s, &m); - - UN16x4_MUL_UN16x4_ADD_UN16x4_MUL_UN16 (r, ~m, s, dest_ia); - UN16x4_MUL_UN16x4 (d, s); - UN16x4_ADD_UN16x4 (r, d); - - *(dest + i) = r; - } -} - -#define PDF_SEPARABLE_BLEND_MODE(name) \ - static void \ - combine_ ## name ## _u (pixman_implementation_t *imp, \ - pixman_op_t op, \ - uint64_t * dest, \ - const uint64_t * src, \ - const uint64_t * mask, \ - int width) \ - { \ - int i; \ - for (i = 0; i < width; ++i) { \ - uint64_t s = combine_mask (src, mask, i); \ - uint64_t d = *(dest + i); \ - uint16_t sa = ALPHA_16 (s); \ - uint16_t isa = ~sa; \ - uint16_t da = ALPHA_16 (d); \ - uint16_t ida = ~da; \ - uint64_t result; \ - \ - result = d; \ - UN16x4_MUL_UN16_ADD_UN16x4_MUL_UN16 (result, isa, s, ida); \ - \ - *(dest + i) = result + \ - (DIV_ONE_UN16 (sa * da) << A_SHIFT) + \ - (blend_ ## name (RED_16 (d), da, RED_16 (s), sa) << R_SHIFT) + \ - (blend_ ## name (GREEN_16 (d), da, GREEN_16 (s), sa) << G_SHIFT) + \ - (blend_ ## name (BLUE_16 (d), da, BLUE_16 (s), sa)); \ - } \ - } \ - \ - static void \ - combine_ ## name ## _ca (pixman_implementation_t *imp, \ - pixman_op_t op, \ - uint64_t * dest, \ - const uint64_t * src, \ - const uint64_t * mask, \ - int width) \ - { \ - int i; \ - for (i = 0; i < width; ++i) { \ - uint64_t m = *(mask + i); \ - uint64_t s = *(src + i); \ - uint64_t d = *(dest + i); \ - uint16_t da = ALPHA_16 (d); \ - uint16_t ida = ~da; \ - uint64_t result; \ - \ - combine_mask_value_ca (&s, &m); \ - \ - result = d; \ - UN16x4_MUL_UN16x4_ADD_UN16x4_MUL_UN16 (result, ~m, s, ida); \ - \ - result += \ - (DIV_ONE_UN16 (ALPHA_16 (m) * da) << A_SHIFT) + \ - (blend_ ## name (RED_16 (d), da, RED_16 (s), RED_16 (m)) << R_SHIFT) + \ - (blend_ ## name (GREEN_16 (d), da, GREEN_16 (s), GREEN_16 (m)) << G_SHIFT) + \ - (blend_ ## name (BLUE_16 (d), da, BLUE_16 (s), BLUE_16 (m))); \ - \ - *(dest + i) = result; \ - } \ - } - -/* - * Screen - * B(Dca, ad, Sca, as) = Dca.sa + Sca.da - Dca.Sca - */ -static inline uint64_t -blend_screen (uint64_t dca, uint64_t da, uint64_t sca, uint64_t sa) -{ - return DIV_ONE_UN16 (sca * da + dca * sa - sca * dca); -} - -PDF_SEPARABLE_BLEND_MODE (screen) - -/* - * Overlay - * B(Dca, Da, Sca, Sa) = - * if 2.Dca < Da - * 2.Sca.Dca - * otherwise - * Sa.Da - 2.(Da - Dca).(Sa - Sca) - */ -static inline uint64_t -blend_overlay (uint64_t dca, uint64_t da, uint64_t sca, uint64_t sa) -{ - uint64_t rca; - - if (2 * dca < da) - rca = 2 * sca * dca; - else - rca = sa * da - 2 * (da - dca) * (sa - sca); - return DIV_ONE_UN16 (rca); -} - -PDF_SEPARABLE_BLEND_MODE (overlay) - -/* - * Darken - * B(Dca, Da, Sca, Sa) = min (Sca.Da, Dca.Sa) - */ -static inline uint64_t -blend_darken (uint64_t dca, uint64_t da, uint64_t sca, uint64_t sa) -{ - uint64_t s, d; - - s = sca * da; - d = dca * sa; - return DIV_ONE_UN16 (s > d ? d : s); -} - -PDF_SEPARABLE_BLEND_MODE (darken) - -/* - * Lighten - * B(Dca, Da, Sca, Sa) = max (Sca.Da, Dca.Sa) - */ -static inline uint64_t -blend_lighten (uint64_t dca, uint64_t da, uint64_t sca, uint64_t sa) -{ - uint64_t s, d; - - s = sca * da; - d = dca * sa; - return DIV_ONE_UN16 (s > d ? s : d); -} - -PDF_SEPARABLE_BLEND_MODE (lighten) - -/* - * Color dodge - * B(Dca, Da, Sca, Sa) = - * if Dca == 0 - * 0 - * if Sca == Sa - * Sa.Da - * otherwise - * Sa.Da. min (1, Dca / Da / (1 - Sca/Sa)) - */ -static inline uint64_t -blend_color_dodge (uint64_t dca, uint64_t da, uint64_t sca, uint64_t sa) -{ - if (sca >= sa) - { - return dca == 0 ? 0 : DIV_ONE_UN16 (sa * da); - } - else - { - uint64_t rca = dca * sa / (sa - sca); - return DIV_ONE_UN16 (sa * MIN (rca, da)); - } -} - -PDF_SEPARABLE_BLEND_MODE (color_dodge) - -/* - * Color burn - * B(Dca, Da, Sca, Sa) = - * if Dca == Da - * Sa.Da - * if Sca == 0 - * 0 - * otherwise - * Sa.Da.(1 - min (1, (1 - Dca/Da).Sa / Sca)) - */ -static inline uint64_t -blend_color_burn (uint64_t dca, uint64_t da, uint64_t sca, uint64_t sa) -{ - if (sca == 0) - { - return dca < da ? 0 : DIV_ONE_UN16 (sa * da); - } - else - { - uint64_t rca = (da - dca) * sa / sca; - return DIV_ONE_UN16 (sa * (MAX (rca, da) - rca)); - } -} - -PDF_SEPARABLE_BLEND_MODE (color_burn) - -/* - * Hard light - * B(Dca, Da, Sca, Sa) = - * if 2.Sca < Sa - * 2.Sca.Dca - * otherwise - * Sa.Da - 2.(Da - Dca).(Sa - Sca) - */ -static inline uint64_t -blend_hard_light (uint64_t dca, uint64_t da, uint64_t sca, uint64_t sa) -{ - if (2 * sca < sa) - return DIV_ONE_UN16 (2 * sca * dca); - else - return DIV_ONE_UN16 (sa * da - 2 * (da - dca) * (sa - sca)); -} - -PDF_SEPARABLE_BLEND_MODE (hard_light) - -/* - * Soft light - * B(Dca, Da, Sca, Sa) = - * if (2.Sca <= Sa) - * Dca.(Sa - (1 - Dca/Da).(2.Sca - Sa)) - * otherwise if Dca.4 <= Da - * Dca.(Sa + (2.Sca - Sa).((16.Dca/Da - 12).Dca/Da + 3) - * otherwise - * (Dca.Sa + (SQRT (Dca/Da).Da - Dca).(2.Sca - Sa)) - */ -static inline uint64_t -blend_soft_light (uint64_t dca_org, - uint64_t da_org, - uint64_t sca_org, - uint64_t sa_org) -{ - double dca = dca_org * (1.0 / MASK); - double da = da_org * (1.0 / MASK); - double sca = sca_org * (1.0 / MASK); - double sa = sa_org * (1.0 / MASK); - double rca; - - if (2 * sca < sa) - { - if (da == 0) - rca = dca * sa; - else - rca = dca * sa - dca * (da - dca) * (sa - 2 * sca) / da; - } - else if (da == 0) - { - rca = 0; - } - else if (4 * dca <= da) - { - rca = dca * sa + - (2 * sca - sa) * dca * ((16 * dca / da - 12) * dca / da + 3); - } - else - { - rca = dca * sa + (sqrt (dca * da) - dca) * (2 * sca - sa); - } - return rca * MASK + 0.5; -} - -PDF_SEPARABLE_BLEND_MODE (soft_light) - -/* - * Difference - * B(Dca, Da, Sca, Sa) = abs (Dca.Sa - Sca.Da) - */ -static inline uint64_t -blend_difference (uint64_t dca, uint64_t da, uint64_t sca, uint64_t sa) -{ - uint64_t dcasa = dca * sa; - uint64_t scada = sca * da; - - if (scada < dcasa) - return DIV_ONE_UN16 (dcasa - scada); - else - return DIV_ONE_UN16 (scada - dcasa); -} - -PDF_SEPARABLE_BLEND_MODE (difference) - -/* - * Exclusion - * B(Dca, Da, Sca, Sa) = (Sca.Da + Dca.Sa - 2.Sca.Dca) - */ - -/* This can be made faster by writing it directly and not using - * PDF_SEPARABLE_BLEND_MODE, but that's a performance optimization */ - -static inline uint64_t -blend_exclusion (uint64_t dca, uint64_t da, uint64_t sca, uint64_t sa) -{ - return DIV_ONE_UN16 (sca * da + dca * sa - 2 * dca * sca); -} - -PDF_SEPARABLE_BLEND_MODE (exclusion) - -#undef PDF_SEPARABLE_BLEND_MODE - -/* - * PDF nonseperable blend modes are implemented using the following functions - * to operate in Hsl space, with Cmax, Cmid, Cmin referring to the max, mid - * and min value of the red, green and blue components. - * - * LUM (C) = 0.3 × Cred + 0.59 × Cgreen + 0.11 × Cblue - * - * clip_color (C): - * l = LUM (C) - * min = Cmin - * max = Cmax - * if n < 0.0 - * C = l + ( ( ( C – l ) × l ) ⁄ ( l – min ) ) - * if x > 1.0 - * C = l + ( ( ( C – l ) × ( 1 – l ) ) ⁄ ( max – l ) ) - * return C - * - * set_lum (C, l): - * d = l – LUM (C) - * C += d - * return clip_color (C) - * - * SAT (C) = CH_MAX (C) - CH_MIN (C) - * - * set_sat (C, s): - * if Cmax > Cmin - * Cmid = ( ( ( Cmid – Cmin ) × s ) ⁄ ( Cmax – Cmin ) ) - * Cmax = s - * else - * Cmid = Cmax = 0.0 - * Cmin = 0.0 - * return C - */ - -/* For premultiplied colors, we need to know what happens when C is - * multiplied by a real number. LUM and SAT are linear: - * - * LUM (r × C) = r × LUM (C) SAT (r * C) = r * SAT (C) - * - * If we extend clip_color with an extra argument a and change - * - * if x >= 1.0 - * - * into - * - * if x >= a - * - * then clip_color is also linear: - * - * r * clip_color (C, a) = clip_color (r_c, ra); - * - * for positive r. - * - * Similarly, we can extend set_lum with an extra argument that is just passed - * on to clip_color: - * - * r * set_lum ( C, l, a) - * - * = r × clip_color ( C + l - LUM (C), a) - * - * = clip_color ( r * C + r × l - r * LUM (C), r * a) - * - * = set_lum ( r * C, r * l, r * a) - * - * Finally, set_sat: - * - * r * set_sat (C, s) = set_sat (x * C, r * s) - * - * The above holds for all non-zero x, because they x'es in the fraction for - * C_mid cancel out. Specifically, it holds for x = r: - * - * r * set_sat (C, s) = set_sat (r_c, rs) - * - */ - -/* So, for the non-separable PDF blend modes, we have (using s, d for - * non-premultiplied colors, and S, D for premultiplied: - * - * Color: - * - * a_s * a_d * B(s, d) - * = a_s * a_d * set_lum (S/a_s, LUM (D/a_d), 1) - * = set_lum (S * a_d, a_s * LUM (D), a_s * a_d) - * - * - * Luminosity: - * - * a_s * a_d * B(s, d) - * = a_s * a_d * set_lum (D/a_d, LUM(S/a_s), 1) - * = set_lum (a_s * D, a_d * LUM(S), a_s * a_d) - * - * - * Saturation: - * - * a_s * a_d * B(s, d) - * = a_s * a_d * set_lum (set_sat (D/a_d, SAT (S/a_s)), LUM (D/a_d), 1) - * = set_lum (a_s * a_d * set_sat (D/a_d, SAT (S/a_s)), - * a_s * LUM (D), a_s * a_d) - * = set_lum (set_sat (a_s * D, a_d * SAT (S), a_s * LUM (D), a_s * a_d)) - * - * Hue: - * - * a_s * a_d * B(s, d) - * = a_s * a_d * set_lum (set_sat (S/a_s, SAT (D/a_d)), LUM (D/a_d), 1) - * = a_s * a_d * set_lum (set_sat (a_d * S, a_s * SAT (D)), - * a_s * LUM (D), a_s * a_d) - * - */ - -#define CH_MIN(c) (c[0] < c[1] ? (c[0] < c[2] ? c[0] : c[2]) : (c[1] < c[2] ? c[1] : c[2])) -#define CH_MAX(c) (c[0] > c[1] ? (c[0] > c[2] ? c[0] : c[2]) : (c[1] > c[2] ? c[1] : c[2])) -#define LUM(c) ((c[0] * 30 + c[1] * 59 + c[2] * 11) / 100) -#define SAT(c) (CH_MAX (c) - CH_MIN (c)) - -#define PDF_NON_SEPARABLE_BLEND_MODE(name) \ - static void \ - combine_ ## name ## _u (pixman_implementation_t *imp, \ - pixman_op_t op, \ - uint64_t *dest, \ - const uint64_t *src, \ - const uint64_t *mask, \ - int width) \ - { \ - int i; \ - for (i = 0; i < width; ++i) \ - { \ - uint64_t s = combine_mask (src, mask, i); \ - uint64_t d = *(dest + i); \ - uint16_t sa = ALPHA_16 (s); \ - uint16_t isa = ~sa; \ - uint16_t da = ALPHA_16 (d); \ - uint16_t ida = ~da; \ - uint64_t result; \ - uint64_t sc[3], dc[3], c[3]; \ - \ - result = d; \ - UN16x4_MUL_UN16_ADD_UN16x4_MUL_UN16 (result, isa, s, ida); \ - dc[0] = RED_16 (d); \ - sc[0] = RED_16 (s); \ - dc[1] = GREEN_16 (d); \ - sc[1] = GREEN_16 (s); \ - dc[2] = BLUE_16 (d); \ - sc[2] = BLUE_16 (s); \ - blend_ ## name (c, dc, da, sc, sa); \ - \ - *(dest + i) = result + \ - (DIV_ONE_UN16 (sa * da) << A_SHIFT) + \ - (DIV_ONE_UN16 (c[0]) << R_SHIFT) + \ - (DIV_ONE_UN16 (c[1]) << G_SHIFT) + \ - (DIV_ONE_UN16 (c[2])); \ - } \ - } - -static void -set_lum (uint64_t dest[3], uint64_t src[3], uint64_t sa, uint64_t lum) -{ - double a, l, min, max; - double tmp[3]; - - a = sa * (1.0 / MASK); - - l = lum * (1.0 / MASK); - tmp[0] = src[0] * (1.0 / MASK); - tmp[1] = src[1] * (1.0 / MASK); - tmp[2] = src[2] * (1.0 / MASK); - - l = l - LUM (tmp); - tmp[0] += l; - tmp[1] += l; - tmp[2] += l; - - /* clip_color */ - l = LUM (tmp); - min = CH_MIN (tmp); - max = CH_MAX (tmp); - - if (min < 0) - { - tmp[0] = l + (tmp[0] - l) * l / (l - min); - tmp[1] = l + (tmp[1] - l) * l / (l - min); - tmp[2] = l + (tmp[2] - l) * l / (l - min); - } - if (max > a) - { - tmp[0] = l + (tmp[0] - l) * (a - l) / (max - l); - tmp[1] = l + (tmp[1] - l) * (a - l) / (max - l); - tmp[2] = l + (tmp[2] - l) * (a - l) / (max - l); - } - - dest[0] = tmp[0] * MASK + 0.5; - dest[1] = tmp[1] * MASK + 0.5; - dest[2] = tmp[2] * MASK + 0.5; -} - -static void -set_sat (uint64_t dest[3], uint64_t src[3], uint64_t sat) -{ - int id[3]; - uint64_t min, max; - - if (src[0] > src[1]) - { - if (src[0] > src[2]) - { - id[0] = 0; - if (src[1] > src[2]) - { - id[1] = 1; - id[2] = 2; - } - else - { - id[1] = 2; - id[2] = 1; - } - } - else - { - id[0] = 2; - id[1] = 0; - id[2] = 1; - } - } - else - { - if (src[0] > src[2]) - { - id[0] = 1; - id[1] = 0; - id[2] = 2; - } - else - { - id[2] = 0; - if (src[1] > src[2]) - { - id[0] = 1; - id[1] = 2; - } - else - { - id[0] = 2; - id[1] = 1; - } - } - } - - max = dest[id[0]]; - min = dest[id[2]]; - if (max > min) - { - dest[id[1]] = (dest[id[1]] - min) * sat / (max - min); - dest[id[0]] = sat; - dest[id[2]] = 0; - } - else - { - dest[0] = dest[1] = dest[2] = 0; - } -} - -/* - * Hue: - * B(Cb, Cs) = set_lum (set_sat (Cs, SAT (Cb)), LUM (Cb)) - */ -static inline void -blend_hsl_hue (uint64_t c[3], - uint64_t dc[3], - uint64_t da, - uint64_t sc[3], - uint64_t sa) -{ - c[0] = sc[0] * da; - c[1] = sc[1] * da; - c[2] = sc[2] * da; - set_sat (c, c, SAT (dc) * sa); - set_lum (c, c, sa * da, LUM (dc) * sa); -} - -PDF_NON_SEPARABLE_BLEND_MODE (hsl_hue) - -/* - * Saturation: - * B(Cb, Cs) = set_lum (set_sat (Cb, SAT (Cs)), LUM (Cb)) - */ -static inline void -blend_hsl_saturation (uint64_t c[3], - uint64_t dc[3], - uint64_t da, - uint64_t sc[3], - uint64_t sa) -{ - c[0] = dc[0] * sa; - c[1] = dc[1] * sa; - c[2] = dc[2] * sa; - set_sat (c, c, SAT (sc) * da); - set_lum (c, c, sa * da, LUM (dc) * sa); -} - -PDF_NON_SEPARABLE_BLEND_MODE (hsl_saturation) - -/* - * Color: - * B(Cb, Cs) = set_lum (Cs, LUM (Cb)) - */ -static inline void -blend_hsl_color (uint64_t c[3], - uint64_t dc[3], - uint64_t da, - uint64_t sc[3], - uint64_t sa) -{ - c[0] = sc[0] * da; - c[1] = sc[1] * da; - c[2] = sc[2] * da; - set_lum (c, c, sa * da, LUM (dc) * sa); -} - -PDF_NON_SEPARABLE_BLEND_MODE (hsl_color) - -/* - * Luminosity: - * B(Cb, Cs) = set_lum (Cb, LUM (Cs)) - */ -static inline void -blend_hsl_luminosity (uint64_t c[3], - uint64_t dc[3], - uint64_t da, - uint64_t sc[3], - uint64_t sa) -{ - c[0] = dc[0] * sa; - c[1] = dc[1] * sa; - c[2] = dc[2] * sa; - set_lum (c, c, sa * da, LUM (sc) * da); -} - -PDF_NON_SEPARABLE_BLEND_MODE (hsl_luminosity) - -#undef SAT -#undef LUM -#undef CH_MAX -#undef CH_MIN -#undef PDF_NON_SEPARABLE_BLEND_MODE - -/* Overlay - * - * All of the disjoint composing functions - * - * The four entries in the first column indicate what source contributions - * come from each of the four areas of the picture -- areas covered by neither - * A nor B, areas covered only by A, areas covered only by B and finally - * areas covered by both A and B. - * - * Disjoint Conjoint - * Fa Fb Fa Fb - * (0,0,0,0) 0 0 0 0 - * (0,A,0,A) 1 0 1 0 - * (0,0,B,B) 0 1 0 1 - * (0,A,B,A) 1 min((1-a)/b,1) 1 max(1-a/b,0) - * (0,A,B,B) min((1-b)/a,1) 1 max(1-b/a,0) 1 - * (0,0,0,A) max(1-(1-b)/a,0) 0 min(1,b/a) 0 - * (0,0,0,B) 0 max(1-(1-a)/b,0) 0 min(a/b,1) - * (0,A,0,0) min(1,(1-b)/a) 0 max(1-b/a,0) 0 - * (0,0,B,0) 0 min(1,(1-a)/b) 0 max(1-a/b,0) - * (0,0,B,A) max(1-(1-b)/a,0) min(1,(1-a)/b) min(1,b/a) max(1-a/b,0) - * (0,A,0,B) min(1,(1-b)/a) max(1-(1-a)/b,0) max(1-b/a,0) min(1,a/b) - * (0,A,B,0) min(1,(1-b)/a) min(1,(1-a)/b) max(1-b/a,0) max(1-a/b,0) - */ - -#define COMBINE_A_OUT 1 -#define COMBINE_A_IN 2 -#define COMBINE_B_OUT 4 -#define COMBINE_B_IN 8 - -#define COMBINE_CLEAR 0 -#define COMBINE_A (COMBINE_A_OUT | COMBINE_A_IN) -#define COMBINE_B (COMBINE_B_OUT | COMBINE_B_IN) -#define COMBINE_A_OVER (COMBINE_A_OUT | COMBINE_B_OUT | COMBINE_A_IN) -#define COMBINE_B_OVER (COMBINE_A_OUT | COMBINE_B_OUT | COMBINE_B_IN) -#define COMBINE_A_ATOP (COMBINE_B_OUT | COMBINE_A_IN) -#define COMBINE_B_ATOP (COMBINE_A_OUT | COMBINE_B_IN) -#define COMBINE_XOR (COMBINE_A_OUT | COMBINE_B_OUT) - -/* portion covered by a but not b */ -static uint16_t -combine_disjoint_out_part (uint16_t a, uint16_t b) -{ - /* min (1, (1-b) / a) */ - - b = ~b; /* 1 - b */ - if (b >= a) /* 1 - b >= a -> (1-b)/a >= 1 */ - return MASK; /* 1 */ - return DIV_UN16 (b, a); /* (1-b) / a */ -} - -/* portion covered by both a and b */ -static uint16_t -combine_disjoint_in_part (uint16_t a, uint16_t b) -{ - /* max (1-(1-b)/a,0) */ - /* = - min ((1-b)/a - 1, 0) */ - /* = 1 - min (1, (1-b)/a) */ - - b = ~b; /* 1 - b */ - if (b >= a) /* 1 - b >= a -> (1-b)/a >= 1 */ - return 0; /* 1 - 1 */ - return ~DIV_UN16(b, a); /* 1 - (1-b) / a */ -} - -/* portion covered by a but not b */ -static uint16_t -combine_conjoint_out_part (uint16_t a, uint16_t b) -{ - /* max (1-b/a,0) */ - /* = 1-min(b/a,1) */ - - /* min (1, (1-b) / a) */ - - if (b >= a) /* b >= a -> b/a >= 1 */ - return 0x00; /* 0 */ - return ~DIV_UN16(b, a); /* 1 - b/a */ -} - -/* portion covered by both a and b */ -static uint16_t -combine_conjoint_in_part (uint16_t a, uint16_t b) -{ - /* min (1,b/a) */ - - if (b >= a) /* b >= a -> b/a >= 1 */ - return MASK; /* 1 */ - return DIV_UN16 (b, a); /* b/a */ -} - -#define GET_COMP(v, i) ((uint32_t) (uint16_t) ((v) >> i)) - -#define ADD(x, y, i, t) \ - ((t) = GET_COMP (x, i) + GET_COMP (y, i), \ - (uint64_t) ((uint16_t) ((t) | (0 - ((t) >> G_SHIFT)))) << (i)) - -#define GENERIC(x, y, i, ax, ay, t, u, v) \ - ((t) = (MUL_UN16 (GET_COMP (y, i), ay, (u)) + \ - MUL_UN16 (GET_COMP (x, i), ax, (v))), \ - (uint64_t) ((uint16_t) ((t) | \ - (0 - ((t) >> G_SHIFT)))) << (i)) - -static void -combine_disjoint_general_u (uint64_t * dest, - const uint64_t *src, - const uint64_t *mask, - int width, - uint16_t combine) -{ - int i; - - for (i = 0; i < width; ++i) - { - uint64_t s = combine_mask (src, mask, i); - uint64_t d = *(dest + i); - uint64_t m, n, o, p; - uint32_t Fa, Fb, t, u, v; - uint16_t sa = s >> A_SHIFT; - uint16_t da = d >> A_SHIFT; - - switch (combine & COMBINE_A) - { - default: - Fa = 0; - break; - - case COMBINE_A_OUT: - Fa = combine_disjoint_out_part (sa, da); - break; - - case COMBINE_A_IN: - Fa = combine_disjoint_in_part (sa, da); - break; - - case COMBINE_A: - Fa = MASK; - break; - } - - switch (combine & COMBINE_B) - { - default: - Fb = 0; - break; - - case COMBINE_B_OUT: - Fb = combine_disjoint_out_part (da, sa); - break; - - case COMBINE_B_IN: - Fb = combine_disjoint_in_part (da, sa); - break; - - case COMBINE_B: - Fb = MASK; - break; - } - m = GENERIC (s, d, 0, Fa, Fb, t, u, v); - n = GENERIC (s, d, G_SHIFT, Fa, Fb, t, u, v); - o = GENERIC (s, d, R_SHIFT, Fa, Fb, t, u, v); - p = GENERIC (s, d, A_SHIFT, Fa, Fb, t, u, v); - s = m | n | o | p; - *(dest + i) = s; - } -} - -static void -combine_disjoint_over_u (pixman_implementation_t *imp, - pixman_op_t op, - uint64_t * dest, - const uint64_t * src, - const uint64_t * mask, - int width) -{ - int i; - - for (i = 0; i < width; ++i) - { - uint64_t s = combine_mask (src, mask, i); - uint32_t a = s >> A_SHIFT; - - if (a != 0x00) - { - if (a != MASK) - { - uint64_t d = *(dest + i); - a = combine_disjoint_out_part (d >> A_SHIFT, a); - UN16x4_MUL_UN16_ADD_UN16x4 (d, a, s); - s = d; - } - - *(dest + i) = s; - } - } -} - -static void -combine_disjoint_in_u (pixman_implementation_t *imp, - pixman_op_t op, - uint64_t * dest, - const uint64_t * src, - const uint64_t * mask, - int width) -{ - combine_disjoint_general_u (dest, src, mask, width, COMBINE_A_IN); -} - -static void -combine_disjoint_in_reverse_u (pixman_implementation_t *imp, - pixman_op_t op, - uint64_t * dest, - const uint64_t * src, - const uint64_t * mask, - int width) -{ - combine_disjoint_general_u (dest, src, mask, width, COMBINE_B_IN); -} - -static void -combine_disjoint_out_u (pixman_implementation_t *imp, - pixman_op_t op, - uint64_t * dest, - const uint64_t * src, - const uint64_t * mask, - int width) -{ - combine_disjoint_general_u (dest, src, mask, width, COMBINE_A_OUT); -} - -static void -combine_disjoint_out_reverse_u (pixman_implementation_t *imp, - pixman_op_t op, - uint64_t * dest, - const uint64_t * src, - const uint64_t * mask, - int width) -{ - combine_disjoint_general_u (dest, src, mask, width, COMBINE_B_OUT); -} - -static void -combine_disjoint_atop_u (pixman_implementation_t *imp, - pixman_op_t op, - uint64_t * dest, - const uint64_t * src, - const uint64_t * mask, - int width) -{ - combine_disjoint_general_u (dest, src, mask, width, COMBINE_A_ATOP); -} - -static void -combine_disjoint_atop_reverse_u (pixman_implementation_t *imp, - pixman_op_t op, - uint64_t * dest, - const uint64_t * src, - const uint64_t * mask, - int width) -{ - combine_disjoint_general_u (dest, src, mask, width, COMBINE_B_ATOP); -} - -static void -combine_disjoint_xor_u (pixman_implementation_t *imp, - pixman_op_t op, - uint64_t * dest, - const uint64_t * src, - const uint64_t * mask, - int width) -{ - combine_disjoint_general_u (dest, src, mask, width, COMBINE_XOR); -} - -static void -combine_conjoint_general_u (uint64_t * dest, - const uint64_t *src, - const uint64_t *mask, - int width, - uint16_t combine) -{ - int i; - - for (i = 0; i < width; ++i) - { - uint64_t s = combine_mask (src, mask, i); - uint64_t d = *(dest + i); - uint64_t m, n, o, p; - uint32_t Fa, Fb, t, u, v; - uint16_t sa = s >> A_SHIFT; - uint16_t da = d >> A_SHIFT; - - switch (combine & COMBINE_A) - { - default: - Fa = 0; - break; - - case COMBINE_A_OUT: - Fa = combine_conjoint_out_part (sa, da); - break; - - case COMBINE_A_IN: - Fa = combine_conjoint_in_part (sa, da); - break; - - case COMBINE_A: - Fa = MASK; - break; - } - - switch (combine & COMBINE_B) - { - default: - Fb = 0; - break; - - case COMBINE_B_OUT: - Fb = combine_conjoint_out_part (da, sa); - break; - - case COMBINE_B_IN: - Fb = combine_conjoint_in_part (da, sa); - break; - - case COMBINE_B: - Fb = MASK; - break; - } - - m = GENERIC (s, d, 0, Fa, Fb, t, u, v); - n = GENERIC (s, d, G_SHIFT, Fa, Fb, t, u, v); - o = GENERIC (s, d, R_SHIFT, Fa, Fb, t, u, v); - p = GENERIC (s, d, A_SHIFT, Fa, Fb, t, u, v); - - s = m | n | o | p; - - *(dest + i) = s; - } -} - -static void -combine_conjoint_over_u (pixman_implementation_t *imp, - pixman_op_t op, - uint64_t * dest, - const uint64_t * src, - const uint64_t * mask, - int width) -{ - combine_conjoint_general_u (dest, src, mask, width, COMBINE_A_OVER); -} - -static void -combine_conjoint_over_reverse_u (pixman_implementation_t *imp, - pixman_op_t op, - uint64_t * dest, - const uint64_t * src, - const uint64_t * mask, - int width) -{ - combine_conjoint_general_u (dest, src, mask, width, COMBINE_B_OVER); -} - -static void -combine_conjoint_in_u (pixman_implementation_t *imp, - pixman_op_t op, - uint64_t * dest, - const uint64_t * src, - const uint64_t * mask, - int width) -{ - combine_conjoint_general_u (dest, src, mask, width, COMBINE_A_IN); -} - -static void -combine_conjoint_in_reverse_u (pixman_implementation_t *imp, - pixman_op_t op, - uint64_t * dest, - const uint64_t * src, - const uint64_t * mask, - int width) -{ - combine_conjoint_general_u (dest, src, mask, width, COMBINE_B_IN); -} - -static void -combine_conjoint_out_u (pixman_implementation_t *imp, - pixman_op_t op, - uint64_t * dest, - const uint64_t * src, - const uint64_t * mask, - int width) -{ - combine_conjoint_general_u (dest, src, mask, width, COMBINE_A_OUT); -} - -static void -combine_conjoint_out_reverse_u (pixman_implementation_t *imp, - pixman_op_t op, - uint64_t * dest, - const uint64_t * src, - const uint64_t * mask, - int width) -{ - combine_conjoint_general_u (dest, src, mask, width, COMBINE_B_OUT); -} - -static void -combine_conjoint_atop_u (pixman_implementation_t *imp, - pixman_op_t op, - uint64_t * dest, - const uint64_t * src, - const uint64_t * mask, - int width) -{ - combine_conjoint_general_u (dest, src, mask, width, COMBINE_A_ATOP); -} - -static void -combine_conjoint_atop_reverse_u (pixman_implementation_t *imp, - pixman_op_t op, - uint64_t * dest, - const uint64_t * src, - const uint64_t * mask, - int width) -{ - combine_conjoint_general_u (dest, src, mask, width, COMBINE_B_ATOP); -} - -static void -combine_conjoint_xor_u (pixman_implementation_t *imp, - pixman_op_t op, - uint64_t * dest, - const uint64_t * src, - const uint64_t * mask, - int width) -{ - combine_conjoint_general_u (dest, src, mask, width, COMBINE_XOR); -} - -/************************************************************************/ -/*********************** Per Channel functions **************************/ -/************************************************************************/ - -static void -combine_clear_ca (pixman_implementation_t *imp, - pixman_op_t op, - uint64_t * dest, - const uint64_t * src, - const uint64_t * mask, - int width) -{ - memset (dest, 0, width * sizeof(uint64_t)); -} - -static void -combine_src_ca (pixman_implementation_t *imp, - pixman_op_t op, - uint64_t * dest, - const uint64_t * src, - const uint64_t * mask, - int width) -{ - int i; - - for (i = 0; i < width; ++i) - { - uint64_t s = *(src + i); - uint64_t m = *(mask + i); - - combine_mask_value_ca (&s, &m); - - *(dest + i) = s; - } -} - -static void -combine_over_ca (pixman_implementation_t *imp, - pixman_op_t op, - uint64_t * dest, - const uint64_t * src, - const uint64_t * mask, - int width) -{ - int i; - - for (i = 0; i < width; ++i) - { - uint64_t s = *(src + i); - uint64_t m = *(mask + i); - uint64_t a; - - combine_mask_ca (&s, &m); - - a = ~m; - if (a) - { - uint64_t d = *(dest + i); - UN16x4_MUL_UN16x4_ADD_UN16x4 (d, a, s); - s = d; - } - - *(dest + i) = s; - } -} - -static void -combine_over_reverse_ca (pixman_implementation_t *imp, - pixman_op_t op, - uint64_t * dest, - const uint64_t * src, - const uint64_t * mask, - int width) -{ - int i; - - for (i = 0; i < width; ++i) - { - uint64_t d = *(dest + i); - uint64_t a = ~d >> A_SHIFT; - - if (a) - { - uint64_t s = *(src + i); - uint64_t m = *(mask + i); - - UN16x4_MUL_UN16x4 (s, m); - UN16x4_MUL_UN16_ADD_UN16x4 (s, a, d); - - *(dest + i) = s; - } - } -} - -static void -combine_in_ca (pixman_implementation_t *imp, - pixman_op_t op, - uint64_t * dest, - const uint64_t * src, - const uint64_t * mask, - int width) -{ - int i; - - for (i = 0; i < width; ++i) - { - uint64_t d = *(dest + i); - uint32_t a = d >> A_SHIFT; - uint64_t s = 0; - - if (a) - { - uint64_t m = *(mask + i); - - s = *(src + i); - combine_mask_value_ca (&s, &m); - - if (a != MASK) - UN16x4_MUL_UN16 (s, a); - } - - *(dest + i) = s; - } -} - -static void -combine_in_reverse_ca (pixman_implementation_t *imp, - pixman_op_t op, - uint64_t * dest, - const uint64_t * src, - const uint64_t * mask, - int width) -{ - int i; - - for (i = 0; i < width; ++i) - { - uint64_t s = *(src + i); - uint64_t m = *(mask + i); - uint64_t a; - - combine_mask_alpha_ca (&s, &m); - - a = m; - if (a != ~0) - { - uint64_t d = 0; - - if (a) - { - d = *(dest + i); - UN16x4_MUL_UN16x4 (d, a); - } - - *(dest + i) = d; - } - } -} - -static void -combine_out_ca (pixman_implementation_t *imp, - pixman_op_t op, - uint64_t * dest, - const uint64_t * src, - const uint64_t * mask, - int width) -{ - int i; - - for (i = 0; i < width; ++i) - { - uint64_t d = *(dest + i); - uint32_t a = ~d >> A_SHIFT; - uint64_t s = 0; - - if (a) - { - uint64_t m = *(mask + i); - - s = *(src + i); - combine_mask_value_ca (&s, &m); - - if (a != MASK) - UN16x4_MUL_UN16 (s, a); - } - - *(dest + i) = s; - } -} - -static void -combine_out_reverse_ca (pixman_implementation_t *imp, - pixman_op_t op, - uint64_t * dest, - const uint64_t * src, - const uint64_t * mask, - int width) -{ - int i; - - for (i = 0; i < width; ++i) - { - uint64_t s = *(src + i); - uint64_t m = *(mask + i); - uint64_t a; - - combine_mask_alpha_ca (&s, &m); - - a = ~m; - if (a != ~0) - { - uint64_t d = 0; - - if (a) - { - d = *(dest + i); - UN16x4_MUL_UN16x4 (d, a); - } - - *(dest + i) = d; - } - } -} - -static void -combine_atop_ca (pixman_implementation_t *imp, - pixman_op_t op, - uint64_t * dest, - const uint64_t * src, - const uint64_t * mask, - int width) -{ - int i; - - for (i = 0; i < width; ++i) - { - uint64_t d = *(dest + i); - uint64_t s = *(src + i); - uint64_t m = *(mask + i); - uint64_t ad; - uint32_t as = d >> A_SHIFT; - - combine_mask_ca (&s, &m); - - ad = ~m; - - UN16x4_MUL_UN16x4_ADD_UN16x4_MUL_UN16 (d, ad, s, as); - - *(dest + i) = d; - } -} - -static void -combine_atop_reverse_ca (pixman_implementation_t *imp, - pixman_op_t op, - uint64_t * dest, - const uint64_t * src, - const uint64_t * mask, - int width) -{ - int i; - - for (i = 0; i < width; ++i) - { - uint64_t d = *(dest + i); - uint64_t s = *(src + i); - uint64_t m = *(mask + i); - uint64_t ad; - uint32_t as = ~d >> A_SHIFT; - - combine_mask_ca (&s, &m); - - ad = m; - - UN16x4_MUL_UN16x4_ADD_UN16x4_MUL_UN16 (d, ad, s, as); - - *(dest + i) = d; - } -} - -static void -combine_xor_ca (pixman_implementation_t *imp, - pixman_op_t op, - uint64_t * dest, - const uint64_t * src, - const uint64_t * mask, - int width) -{ - int i; - - for (i = 0; i < width; ++i) - { - uint64_t d = *(dest + i); - uint64_t s = *(src + i); - uint64_t m = *(mask + i); - uint64_t ad; - uint32_t as = ~d >> A_SHIFT; - - combine_mask_ca (&s, &m); - - ad = ~m; - - UN16x4_MUL_UN16x4_ADD_UN16x4_MUL_UN16 (d, ad, s, as); - - *(dest + i) = d; - } -} - -static void -combine_add_ca (pixman_implementation_t *imp, - pixman_op_t op, - uint64_t * dest, - const uint64_t * src, - const uint64_t * mask, - int width) -{ - int i; - - for (i = 0; i < width; ++i) - { - uint64_t s = *(src + i); - uint64_t m = *(mask + i); - uint64_t d = *(dest + i); - - combine_mask_value_ca (&s, &m); - - UN16x4_ADD_UN16x4 (d, s); - - *(dest + i) = d; - } -} - -static void -combine_saturate_ca (pixman_implementation_t *imp, - pixman_op_t op, - uint64_t * dest, - const uint64_t * src, - const uint64_t * mask, - int width) -{ - int i; - - for (i = 0; i < width; ++i) - { - uint64_t s, d; - uint32_t sa, sr, sg, sb, da; - uint32_t t, u, v; - uint64_t m, n, o, p; - - d = *(dest + i); - s = *(src + i); - m = *(mask + i); - - combine_mask_ca (&s, &m); - - sa = (m >> A_SHIFT); - sr = (m >> R_SHIFT) & MASK; - sg = (m >> G_SHIFT) & MASK; - sb = m & MASK; - da = ~d >> A_SHIFT; - - if (sb <= da) - m = ADD (s, d, 0, t); - else - m = GENERIC (s, d, 0, (da << G_SHIFT) / sb, MASK, t, u, v); - - if (sg <= da) - n = ADD (s, d, G_SHIFT, t); - else - n = GENERIC (s, d, G_SHIFT, (da << G_SHIFT) / sg, MASK, t, u, v); - - if (sr <= da) - o = ADD (s, d, R_SHIFT, t); - else - o = GENERIC (s, d, R_SHIFT, (da << G_SHIFT) / sr, MASK, t, u, v); - - if (sa <= da) - p = ADD (s, d, A_SHIFT, t); - else - p = GENERIC (s, d, A_SHIFT, (da << G_SHIFT) / sa, MASK, t, u, v); - - *(dest + i) = m | n | o | p; - } -} - -static void -combine_disjoint_general_ca (uint64_t * dest, - const uint64_t *src, - const uint64_t *mask, - int width, - uint16_t combine) -{ - int i; - - for (i = 0; i < width; ++i) - { - uint64_t s, d; - uint64_t m, n, o, p; - uint64_t Fa, Fb; - uint32_t t, u, v; - uint64_t sa; - uint16_t da; - - s = *(src + i); - m = *(mask + i); - d = *(dest + i); - da = d >> A_SHIFT; - - combine_mask_ca (&s, &m); - - sa = m; - - switch (combine & COMBINE_A) - { - default: - Fa = 0; - break; - - case COMBINE_A_OUT: - m = (uint64_t)combine_disjoint_out_part ((uint16_t) (sa >> 0), da); - n = (uint64_t)combine_disjoint_out_part ((uint16_t) (sa >> G_SHIFT), da) << G_SHIFT; - o = (uint64_t)combine_disjoint_out_part ((uint16_t) (sa >> R_SHIFT), da) << R_SHIFT; - p = (uint64_t)combine_disjoint_out_part ((uint16_t) (sa >> A_SHIFT), da) << A_SHIFT; - Fa = m | n | o | p; - break; - - case COMBINE_A_IN: - m = (uint64_t)combine_disjoint_in_part ((uint16_t) (sa >> 0), da); - n = (uint64_t)combine_disjoint_in_part ((uint16_t) (sa >> G_SHIFT), da) << G_SHIFT; - o = (uint64_t)combine_disjoint_in_part ((uint16_t) (sa >> R_SHIFT), da) << R_SHIFT; - p = (uint64_t)combine_disjoint_in_part ((uint16_t) (sa >> A_SHIFT), da) << A_SHIFT; - Fa = m | n | o | p; - break; - - case COMBINE_A: - Fa = ~0; - break; - } - - switch (combine & COMBINE_B) - { - default: - Fb = 0; - break; - - case COMBINE_B_OUT: - m = (uint64_t)combine_disjoint_out_part (da, (uint16_t) (sa >> 0)); - n = (uint64_t)combine_disjoint_out_part (da, (uint16_t) (sa >> G_SHIFT)) << G_SHIFT; - o = (uint64_t)combine_disjoint_out_part (da, (uint16_t) (sa >> R_SHIFT)) << R_SHIFT; - p = (uint64_t)combine_disjoint_out_part (da, (uint16_t) (sa >> A_SHIFT)) << A_SHIFT; - Fb = m | n | o | p; - break; - - case COMBINE_B_IN: - m = (uint64_t)combine_disjoint_in_part (da, (uint16_t) (sa >> 0)); - n = (uint64_t)combine_disjoint_in_part (da, (uint16_t) (sa >> G_SHIFT)) << G_SHIFT; - o = (uint64_t)combine_disjoint_in_part (da, (uint16_t) (sa >> R_SHIFT)) << R_SHIFT; - p = (uint64_t)combine_disjoint_in_part (da, (uint16_t) (sa >> A_SHIFT)) << A_SHIFT; - Fb = m | n | o | p; - break; - - case COMBINE_B: - Fb = ~0; - break; - } - m = GENERIC (s, d, 0, GET_COMP (Fa, 0), GET_COMP (Fb, 0), t, u, v); - n = GENERIC (s, d, G_SHIFT, GET_COMP (Fa, G_SHIFT), GET_COMP (Fb, G_SHIFT), t, u, v); - o = GENERIC (s, d, R_SHIFT, GET_COMP (Fa, R_SHIFT), GET_COMP (Fb, R_SHIFT), t, u, v); - p = GENERIC (s, d, A_SHIFT, GET_COMP (Fa, A_SHIFT), GET_COMP (Fb, A_SHIFT), t, u, v); - - s = m | n | o | p; - - *(dest + i) = s; - } -} - -static void -combine_disjoint_over_ca (pixman_implementation_t *imp, - pixman_op_t op, - uint64_t * dest, - const uint64_t * src, - const uint64_t * mask, - int width) -{ - combine_disjoint_general_ca (dest, src, mask, width, COMBINE_A_OVER); -} - -static void -combine_disjoint_in_ca (pixman_implementation_t *imp, - pixman_op_t op, - uint64_t * dest, - const uint64_t * src, - const uint64_t * mask, - int width) -{ - combine_disjoint_general_ca (dest, src, mask, width, COMBINE_A_IN); -} - -static void -combine_disjoint_in_reverse_ca (pixman_implementation_t *imp, - pixman_op_t op, - uint64_t * dest, - const uint64_t * src, - const uint64_t * mask, - int width) -{ - combine_disjoint_general_ca (dest, src, mask, width, COMBINE_B_IN); -} - -static void -combine_disjoint_out_ca (pixman_implementation_t *imp, - pixman_op_t op, - uint64_t * dest, - const uint64_t * src, - const uint64_t * mask, - int width) -{ - combine_disjoint_general_ca (dest, src, mask, width, COMBINE_A_OUT); -} - -static void -combine_disjoint_out_reverse_ca (pixman_implementation_t *imp, - pixman_op_t op, - uint64_t * dest, - const uint64_t * src, - const uint64_t * mask, - int width) -{ - combine_disjoint_general_ca (dest, src, mask, width, COMBINE_B_OUT); -} - -static void -combine_disjoint_atop_ca (pixman_implementation_t *imp, - pixman_op_t op, - uint64_t * dest, - const uint64_t * src, - const uint64_t * mask, - int width) -{ - combine_disjoint_general_ca (dest, src, mask, width, COMBINE_A_ATOP); -} - -static void -combine_disjoint_atop_reverse_ca (pixman_implementation_t *imp, - pixman_op_t op, - uint64_t * dest, - const uint64_t * src, - const uint64_t * mask, - int width) -{ - combine_disjoint_general_ca (dest, src, mask, width, COMBINE_B_ATOP); -} - -static void -combine_disjoint_xor_ca (pixman_implementation_t *imp, - pixman_op_t op, - uint64_t * dest, - const uint64_t * src, - const uint64_t * mask, - int width) -{ - combine_disjoint_general_ca (dest, src, mask, width, COMBINE_XOR); -} - -static void -combine_conjoint_general_ca (uint64_t * dest, - const uint64_t *src, - const uint64_t *mask, - int width, - uint16_t combine) -{ - int i; - - for (i = 0; i < width; ++i) - { - uint64_t s, d; - uint64_t m, n, o, p; - uint64_t Fa, Fb; - uint32_t t, u, v; - uint64_t sa; - uint16_t da; - - s = *(src + i); - m = *(mask + i); - d = *(dest + i); - da = d >> A_SHIFT; - - combine_mask_ca (&s, &m); - - sa = m; - - switch (combine & COMBINE_A) - { - default: - Fa = 0; - break; - - case COMBINE_A_OUT: - m = (uint64_t)combine_conjoint_out_part ((uint16_t) (sa >> 0), da); - n = (uint64_t)combine_conjoint_out_part ((uint16_t) (sa >> G_SHIFT), da) << G_SHIFT; - o = (uint64_t)combine_conjoint_out_part ((uint16_t) (sa >> R_SHIFT), da) << R_SHIFT; - p = (uint64_t)combine_conjoint_out_part ((uint16_t) (sa >> A_SHIFT), da) << A_SHIFT; - Fa = m | n | o | p; - break; - - case COMBINE_A_IN: - m = (uint64_t)combine_conjoint_in_part ((uint16_t) (sa >> 0), da); - n = (uint64_t)combine_conjoint_in_part ((uint16_t) (sa >> G_SHIFT), da) << G_SHIFT; - o = (uint64_t)combine_conjoint_in_part ((uint16_t) (sa >> R_SHIFT), da) << R_SHIFT; - p = (uint64_t)combine_conjoint_in_part ((uint16_t) (sa >> A_SHIFT), da) << A_SHIFT; - Fa = m | n | o | p; - break; - - case COMBINE_A: - Fa = ~0; - break; - } - - switch (combine & COMBINE_B) - { - default: - Fb = 0; - break; - - case COMBINE_B_OUT: - m = (uint64_t)combine_conjoint_out_part (da, (uint16_t) (sa >> 0)); - n = (uint64_t)combine_conjoint_out_part (da, (uint16_t) (sa >> G_SHIFT)) << G_SHIFT; - o = (uint64_t)combine_conjoint_out_part (da, (uint16_t) (sa >> R_SHIFT)) << R_SHIFT; - p = (uint64_t)combine_conjoint_out_part (da, (uint16_t) (sa >> A_SHIFT)) << A_SHIFT; - Fb = m | n | o | p; - break; - - case COMBINE_B_IN: - m = (uint64_t)combine_conjoint_in_part (da, (uint16_t) (sa >> 0)); - n = (uint64_t)combine_conjoint_in_part (da, (uint16_t) (sa >> G_SHIFT)) << G_SHIFT; - o = (uint64_t)combine_conjoint_in_part (da, (uint16_t) (sa >> R_SHIFT)) << R_SHIFT; - p = (uint64_t)combine_conjoint_in_part (da, (uint16_t) (sa >> A_SHIFT)) << A_SHIFT; - Fb = m | n | o | p; - break; - - case COMBINE_B: - Fb = ~0; - break; - } - m = GENERIC (s, d, 0, GET_COMP (Fa, 0), GET_COMP (Fb, 0), t, u, v); - n = GENERIC (s, d, G_SHIFT, GET_COMP (Fa, G_SHIFT), GET_COMP (Fb, G_SHIFT), t, u, v); - o = GENERIC (s, d, R_SHIFT, GET_COMP (Fa, R_SHIFT), GET_COMP (Fb, R_SHIFT), t, u, v); - p = GENERIC (s, d, A_SHIFT, GET_COMP (Fa, A_SHIFT), GET_COMP (Fb, A_SHIFT), t, u, v); - - s = m | n | o | p; - - *(dest + i) = s; - } -} - -static void -combine_conjoint_over_ca (pixman_implementation_t *imp, - pixman_op_t op, - uint64_t * dest, - const uint64_t * src, - const uint64_t * mask, - int width) -{ - combine_conjoint_general_ca (dest, src, mask, width, COMBINE_A_OVER); -} - -static void -combine_conjoint_over_reverse_ca (pixman_implementation_t *imp, - pixman_op_t op, - uint64_t * dest, - const uint64_t * src, - const uint64_t * mask, - int width) -{ - combine_conjoint_general_ca (dest, src, mask, width, COMBINE_B_OVER); -} - -static void -combine_conjoint_in_ca (pixman_implementation_t *imp, - pixman_op_t op, - uint64_t * dest, - const uint64_t * src, - const uint64_t * mask, - int width) -{ - combine_conjoint_general_ca (dest, src, mask, width, COMBINE_A_IN); -} - -static void -combine_conjoint_in_reverse_ca (pixman_implementation_t *imp, - pixman_op_t op, - uint64_t * dest, - const uint64_t * src, - const uint64_t * mask, - int width) -{ - combine_conjoint_general_ca (dest, src, mask, width, COMBINE_B_IN); -} - -static void -combine_conjoint_out_ca (pixman_implementation_t *imp, - pixman_op_t op, - uint64_t * dest, - const uint64_t * src, - const uint64_t * mask, - int width) -{ - combine_conjoint_general_ca (dest, src, mask, width, COMBINE_A_OUT); -} - -static void -combine_conjoint_out_reverse_ca (pixman_implementation_t *imp, - pixman_op_t op, - uint64_t * dest, - const uint64_t * src, - const uint64_t * mask, - int width) -{ - combine_conjoint_general_ca (dest, src, mask, width, COMBINE_B_OUT); -} - -static void -combine_conjoint_atop_ca (pixman_implementation_t *imp, - pixman_op_t op, - uint64_t * dest, - const uint64_t * src, - const uint64_t * mask, - int width) -{ - combine_conjoint_general_ca (dest, src, mask, width, COMBINE_A_ATOP); -} - -static void -combine_conjoint_atop_reverse_ca (pixman_implementation_t *imp, - pixman_op_t op, - uint64_t * dest, - const uint64_t * src, - const uint64_t * mask, - int width) -{ - combine_conjoint_general_ca (dest, src, mask, width, COMBINE_B_ATOP); -} - -static void -combine_conjoint_xor_ca (pixman_implementation_t *imp, - pixman_op_t op, - uint64_t * dest, - const uint64_t * src, - const uint64_t * mask, - int width) -{ - combine_conjoint_general_ca (dest, src, mask, width, COMBINE_XOR); -} - -void -_pixman_setup_combiner_functions_64 (pixman_implementation_t *imp) -{ - /* Unified alpha */ - imp->combine_64[PIXMAN_OP_CLEAR] = combine_clear; - imp->combine_64[PIXMAN_OP_SRC] = combine_src_u; - /* dest */ - imp->combine_64[PIXMAN_OP_OVER] = combine_over_u; - imp->combine_64[PIXMAN_OP_OVER_REVERSE] = combine_over_reverse_u; - imp->combine_64[PIXMAN_OP_IN] = combine_in_u; - imp->combine_64[PIXMAN_OP_IN_REVERSE] = combine_in_reverse_u; - imp->combine_64[PIXMAN_OP_OUT] = combine_out_u; - imp->combine_64[PIXMAN_OP_OUT_REVERSE] = combine_out_reverse_u; - imp->combine_64[PIXMAN_OP_ATOP] = combine_atop_u; - imp->combine_64[PIXMAN_OP_ATOP_REVERSE] = combine_atop_reverse_u; - imp->combine_64[PIXMAN_OP_XOR] = combine_xor_u; - imp->combine_64[PIXMAN_OP_ADD] = combine_add_u; - imp->combine_64[PIXMAN_OP_SATURATE] = combine_saturate_u; - - /* Disjoint, unified */ - imp->combine_64[PIXMAN_OP_DISJOINT_CLEAR] = combine_clear; - imp->combine_64[PIXMAN_OP_DISJOINT_SRC] = combine_src_u; - /* dest */ - imp->combine_64[PIXMAN_OP_DISJOINT_OVER] = combine_disjoint_over_u; - imp->combine_64[PIXMAN_OP_DISJOINT_OVER_REVERSE] = combine_saturate_u; - imp->combine_64[PIXMAN_OP_DISJOINT_IN] = combine_disjoint_in_u; - imp->combine_64[PIXMAN_OP_DISJOINT_IN_REVERSE] = combine_disjoint_in_reverse_u; - imp->combine_64[PIXMAN_OP_DISJOINT_OUT] = combine_disjoint_out_u; - imp->combine_64[PIXMAN_OP_DISJOINT_OUT_REVERSE] = combine_disjoint_out_reverse_u; - imp->combine_64[PIXMAN_OP_DISJOINT_ATOP] = combine_disjoint_atop_u; - imp->combine_64[PIXMAN_OP_DISJOINT_ATOP_REVERSE] = combine_disjoint_atop_reverse_u; - imp->combine_64[PIXMAN_OP_DISJOINT_XOR] = combine_disjoint_xor_u; - - /* Conjoint, unified */ - imp->combine_64[PIXMAN_OP_CONJOINT_CLEAR] = combine_clear; - imp->combine_64[PIXMAN_OP_CONJOINT_SRC] = combine_src_u; - /* dest */ - imp->combine_64[PIXMAN_OP_CONJOINT_OVER] = combine_conjoint_over_u; - imp->combine_64[PIXMAN_OP_CONJOINT_OVER_REVERSE] = combine_conjoint_over_reverse_u; - imp->combine_64[PIXMAN_OP_CONJOINT_IN] = combine_conjoint_in_u; - imp->combine_64[PIXMAN_OP_CONJOINT_IN_REVERSE] = combine_conjoint_in_reverse_u; - imp->combine_64[PIXMAN_OP_CONJOINT_OUT] = combine_conjoint_out_u; - imp->combine_64[PIXMAN_OP_CONJOINT_OUT_REVERSE] = combine_conjoint_out_reverse_u; - imp->combine_64[PIXMAN_OP_CONJOINT_ATOP] = combine_conjoint_atop_u; - imp->combine_64[PIXMAN_OP_CONJOINT_ATOP_REVERSE] = combine_conjoint_atop_reverse_u; - imp->combine_64[PIXMAN_OP_CONJOINT_XOR] = combine_conjoint_xor_u; - - imp->combine_64[PIXMAN_OP_MULTIPLY] = combine_multiply_u; - imp->combine_64[PIXMAN_OP_SCREEN] = combine_screen_u; - imp->combine_64[PIXMAN_OP_OVERLAY] = combine_overlay_u; - imp->combine_64[PIXMAN_OP_DARKEN] = combine_darken_u; - imp->combine_64[PIXMAN_OP_LIGHTEN] = combine_lighten_u; - imp->combine_64[PIXMAN_OP_COLOR_DODGE] = combine_color_dodge_u; - imp->combine_64[PIXMAN_OP_COLOR_BURN] = combine_color_burn_u; - imp->combine_64[PIXMAN_OP_HARD_LIGHT] = combine_hard_light_u; - imp->combine_64[PIXMAN_OP_SOFT_LIGHT] = combine_soft_light_u; - imp->combine_64[PIXMAN_OP_DIFFERENCE] = combine_difference_u; - imp->combine_64[PIXMAN_OP_EXCLUSION] = combine_exclusion_u; - imp->combine_64[PIXMAN_OP_HSL_HUE] = combine_hsl_hue_u; - imp->combine_64[PIXMAN_OP_HSL_SATURATION] = combine_hsl_saturation_u; - imp->combine_64[PIXMAN_OP_HSL_COLOR] = combine_hsl_color_u; - imp->combine_64[PIXMAN_OP_HSL_LUMINOSITY] = combine_hsl_luminosity_u; - - /* Component alpha combiners */ - imp->combine_64_ca[PIXMAN_OP_CLEAR] = combine_clear_ca; - imp->combine_64_ca[PIXMAN_OP_SRC] = combine_src_ca; - /* dest */ - imp->combine_64_ca[PIXMAN_OP_OVER] = combine_over_ca; - imp->combine_64_ca[PIXMAN_OP_OVER_REVERSE] = combine_over_reverse_ca; - imp->combine_64_ca[PIXMAN_OP_IN] = combine_in_ca; - imp->combine_64_ca[PIXMAN_OP_IN_REVERSE] = combine_in_reverse_ca; - imp->combine_64_ca[PIXMAN_OP_OUT] = combine_out_ca; - imp->combine_64_ca[PIXMAN_OP_OUT_REVERSE] = combine_out_reverse_ca; - imp->combine_64_ca[PIXMAN_OP_ATOP] = combine_atop_ca; - imp->combine_64_ca[PIXMAN_OP_ATOP_REVERSE] = combine_atop_reverse_ca; - imp->combine_64_ca[PIXMAN_OP_XOR] = combine_xor_ca; - imp->combine_64_ca[PIXMAN_OP_ADD] = combine_add_ca; - imp->combine_64_ca[PIXMAN_OP_SATURATE] = combine_saturate_ca; - - /* Disjoint CA */ - imp->combine_64_ca[PIXMAN_OP_DISJOINT_CLEAR] = combine_clear_ca; - imp->combine_64_ca[PIXMAN_OP_DISJOINT_SRC] = combine_src_ca; - /* dest */ - imp->combine_64_ca[PIXMAN_OP_DISJOINT_OVER] = combine_disjoint_over_ca; - imp->combine_64_ca[PIXMAN_OP_DISJOINT_OVER_REVERSE] = combine_saturate_ca; - imp->combine_64_ca[PIXMAN_OP_DISJOINT_IN] = combine_disjoint_in_ca; - imp->combine_64_ca[PIXMAN_OP_DISJOINT_IN_REVERSE] = combine_disjoint_in_reverse_ca; - imp->combine_64_ca[PIXMAN_OP_DISJOINT_OUT] = combine_disjoint_out_ca; - imp->combine_64_ca[PIXMAN_OP_DISJOINT_OUT_REVERSE] = combine_disjoint_out_reverse_ca; - imp->combine_64_ca[PIXMAN_OP_DISJOINT_ATOP] = combine_disjoint_atop_ca; - imp->combine_64_ca[PIXMAN_OP_DISJOINT_ATOP_REVERSE] = combine_disjoint_atop_reverse_ca; - imp->combine_64_ca[PIXMAN_OP_DISJOINT_XOR] = combine_disjoint_xor_ca; - - /* Conjoint CA */ - imp->combine_64_ca[PIXMAN_OP_CONJOINT_CLEAR] = combine_clear_ca; - imp->combine_64_ca[PIXMAN_OP_CONJOINT_SRC] = combine_src_ca; - /* dest */ - imp->combine_64_ca[PIXMAN_OP_CONJOINT_OVER] = combine_conjoint_over_ca; - imp->combine_64_ca[PIXMAN_OP_CONJOINT_OVER_REVERSE] = combine_conjoint_over_reverse_ca; - imp->combine_64_ca[PIXMAN_OP_CONJOINT_IN] = combine_conjoint_in_ca; - imp->combine_64_ca[PIXMAN_OP_CONJOINT_IN_REVERSE] = combine_conjoint_in_reverse_ca; - imp->combine_64_ca[PIXMAN_OP_CONJOINT_OUT] = combine_conjoint_out_ca; - imp->combine_64_ca[PIXMAN_OP_CONJOINT_OUT_REVERSE] = combine_conjoint_out_reverse_ca; - imp->combine_64_ca[PIXMAN_OP_CONJOINT_ATOP] = combine_conjoint_atop_ca; - imp->combine_64_ca[PIXMAN_OP_CONJOINT_ATOP_REVERSE] = combine_conjoint_atop_reverse_ca; - imp->combine_64_ca[PIXMAN_OP_CONJOINT_XOR] = combine_conjoint_xor_ca; - - imp->combine_64_ca[PIXMAN_OP_MULTIPLY] = combine_multiply_ca; - imp->combine_64_ca[PIXMAN_OP_SCREEN] = combine_screen_ca; - imp->combine_64_ca[PIXMAN_OP_OVERLAY] = combine_overlay_ca; - imp->combine_64_ca[PIXMAN_OP_DARKEN] = combine_darken_ca; - imp->combine_64_ca[PIXMAN_OP_LIGHTEN] = combine_lighten_ca; - imp->combine_64_ca[PIXMAN_OP_COLOR_DODGE] = combine_color_dodge_ca; - imp->combine_64_ca[PIXMAN_OP_COLOR_BURN] = combine_color_burn_ca; - imp->combine_64_ca[PIXMAN_OP_HARD_LIGHT] = combine_hard_light_ca; - imp->combine_64_ca[PIXMAN_OP_SOFT_LIGHT] = combine_soft_light_ca; - imp->combine_64_ca[PIXMAN_OP_DIFFERENCE] = combine_difference_ca; - imp->combine_64_ca[PIXMAN_OP_EXCLUSION] = combine_exclusion_ca; - - /* It is not clear that these make sense, so leave them out for now */ - imp->combine_64_ca[PIXMAN_OP_HSL_HUE] = NULL; - imp->combine_64_ca[PIXMAN_OP_HSL_SATURATION] = NULL; - imp->combine_64_ca[PIXMAN_OP_HSL_COLOR] = NULL; - imp->combine_64_ca[PIXMAN_OP_HSL_LUMINOSITY] = NULL; -} - diff --git a/pixman/pixman/pixman-combine64.h b/pixman/pixman/pixman-combine64.h deleted file mode 100644 index bb222a4d7..000000000 --- a/pixman/pixman/pixman-combine64.h +++ /dev/null @@ -1,230 +0,0 @@ -/* WARNING: This file is generated by combine.pl from combine.inc. - Please edit one of those files rather than this one. */ - -#line 1 "pixman-combine.c.template" - -#define COMPONENT_SIZE 16 -#define MASK 0xffffULL -#define ONE_HALF 0x8000ULL - -#define A_SHIFT 16 * 3 -#define R_SHIFT 16 * 2 -#define G_SHIFT 16 -#define A_MASK 0xffff000000000000ULL -#define R_MASK 0xffff00000000ULL -#define G_MASK 0xffff0000ULL - -#define RB_MASK 0xffff0000ffffULL -#define AG_MASK 0xffff0000ffff0000ULL -#define RB_ONE_HALF 0x800000008000ULL -#define RB_MASK_PLUS_ONE 0x10000000010000ULL - -#define ALPHA_16(x) ((x) >> A_SHIFT) -#define RED_16(x) (((x) >> R_SHIFT) & MASK) -#define GREEN_16(x) (((x) >> G_SHIFT) & MASK) -#define BLUE_16(x) ((x) & MASK) - -/* - * Helper macros. - */ - -#define MUL_UN16(a, b, t) \ - ((t) = (a) * (b) + ONE_HALF, ((((t) >> G_SHIFT ) + (t) ) >> G_SHIFT )) - -#define DIV_UN16(a, b) \ - (((uint32_t) (a) * MASK) / (b)) - -#define ADD_UN16(x, y, t) \ - ((t) = x + y, \ - (uint64_t) (uint16_t) ((t) | (0 - ((t) >> G_SHIFT)))) - -#define DIV_ONE_UN16(x) \ - (((x) + ONE_HALF + (((x) + ONE_HALF) >> G_SHIFT)) >> G_SHIFT) - -/* - * The methods below use some tricks to be able to do two color - * components at the same time. - */ - -/* - * x_rb = (x_rb * a) / 255 - */ -#define UN16_rb_MUL_UN16(x, a, t) \ - do \ - { \ - t = ((x) & RB_MASK) * (a); \ - t += RB_ONE_HALF; \ - x = (t + ((t >> G_SHIFT) & RB_MASK)) >> G_SHIFT; \ - x &= RB_MASK; \ - } while (0) - -/* - * x_rb = min (x_rb + y_rb, 255) - */ -#define UN16_rb_ADD_UN16_rb(x, y, t) \ - do \ - { \ - t = ((x) + (y)); \ - t |= RB_MASK_PLUS_ONE - ((t >> G_SHIFT) & RB_MASK); \ - x = (t & RB_MASK); \ - } while (0) - -/* - * x_rb = (x_rb * a_rb) / 255 - */ -#define UN16_rb_MUL_UN16_rb(x, a, t) \ - do \ - { \ - t = (x & MASK) * (a & MASK); \ - t |= (x & R_MASK) * ((a >> R_SHIFT) & MASK); \ - t += RB_ONE_HALF; \ - t = (t + ((t >> G_SHIFT) & RB_MASK)) >> G_SHIFT; \ - x = t & RB_MASK; \ - } while (0) - -/* - * x_c = (x_c * a) / 255 - */ -#define UN16x4_MUL_UN16(x, a) \ - do \ - { \ - uint64_t r1, r2, t; \ - \ - r1 = (x); \ - UN16_rb_MUL_UN16 (r1, a, t); \ - \ - r2 = (x) >> G_SHIFT; \ - UN16_rb_MUL_UN16 (r2, a, t); \ - \ - x = r1 | (r2 << G_SHIFT); \ - } while (0) - -/* - * x_c = (x_c * a) / 255 + y_c - */ -#define UN16x4_MUL_UN16_ADD_UN16x4(x, a, y) \ - do \ - { \ - uint64_t r1, r2, r3, t; \ - \ - r1 = (x); \ - r2 = (y) & RB_MASK; \ - UN16_rb_MUL_UN16 (r1, a, t); \ - UN16_rb_ADD_UN16_rb (r1, r2, t); \ - \ - r2 = (x) >> G_SHIFT; \ - r3 = ((y) >> G_SHIFT) & RB_MASK; \ - UN16_rb_MUL_UN16 (r2, a, t); \ - UN16_rb_ADD_UN16_rb (r2, r3, t); \ - \ - x = r1 | (r2 << G_SHIFT); \ - } while (0) - -/* - * x_c = (x_c * a + y_c * b) / 255 - */ -#define UN16x4_MUL_UN16_ADD_UN16x4_MUL_UN16(x, a, y, b) \ - do \ - { \ - uint64_t r1, r2, r3, t; \ - \ - r1 = x; \ - r2 = y; \ - UN16_rb_MUL_UN16 (r1, a, t); \ - UN16_rb_MUL_UN16 (r2, b, t); \ - UN16_rb_ADD_UN16_rb (r1, r2, t); \ - \ - r2 = (x >> G_SHIFT); \ - r3 = (y >> G_SHIFT); \ - UN16_rb_MUL_UN16 (r2, a, t); \ - UN16_rb_MUL_UN16 (r3, b, t); \ - UN16_rb_ADD_UN16_rb (r2, r3, t); \ - \ - x = r1 | (r2 << G_SHIFT); \ - } while (0) - -/* - * x_c = (x_c * a_c) / 255 - */ -#define UN16x4_MUL_UN16x4(x, a) \ - do \ - { \ - uint64_t r1, r2, r3, t; \ - \ - r1 = x; \ - r2 = a; \ - UN16_rb_MUL_UN16_rb (r1, r2, t); \ - \ - r2 = x >> G_SHIFT; \ - r3 = a >> G_SHIFT; \ - UN16_rb_MUL_UN16_rb (r2, r3, t); \ - \ - x = r1 | (r2 << G_SHIFT); \ - } while (0) - -/* - * x_c = (x_c * a_c) / 255 + y_c - */ -#define UN16x4_MUL_UN16x4_ADD_UN16x4(x, a, y) \ - do \ - { \ - uint64_t r1, r2, r3, t; \ - \ - r1 = x; \ - r2 = a; \ - UN16_rb_MUL_UN16_rb (r1, r2, t); \ - r2 = y & RB_MASK; \ - UN16_rb_ADD_UN16_rb (r1, r2, t); \ - \ - r2 = (x >> G_SHIFT); \ - r3 = (a >> G_SHIFT); \ - UN16_rb_MUL_UN16_rb (r2, r3, t); \ - r3 = (y >> G_SHIFT) & RB_MASK; \ - UN16_rb_ADD_UN16_rb (r2, r3, t); \ - \ - x = r1 | (r2 << G_SHIFT); \ - } while (0) - -/* - * x_c = (x_c * a_c + y_c * b) / 255 - */ -#define UN16x4_MUL_UN16x4_ADD_UN16x4_MUL_UN16(x, a, y, b) \ - do \ - { \ - uint64_t r1, r2, r3, t; \ - \ - r1 = x; \ - r2 = a; \ - UN16_rb_MUL_UN16_rb (r1, r2, t); \ - r2 = y; \ - UN16_rb_MUL_UN16 (r2, b, t); \ - UN16_rb_ADD_UN16_rb (r1, r2, t); \ - \ - r2 = x >> G_SHIFT; \ - r3 = a >> G_SHIFT; \ - UN16_rb_MUL_UN16_rb (r2, r3, t); \ - r3 = y >> G_SHIFT; \ - UN16_rb_MUL_UN16 (r3, b, t); \ - UN16_rb_ADD_UN16_rb (r2, r3, t); \ - \ - x = r1 | (r2 << G_SHIFT); \ - } while (0) - -/* - x_c = min(x_c + y_c, 255) - */ -#define UN16x4_ADD_UN16x4(x, y) \ - do \ - { \ - uint64_t r1, r2, r3, t; \ - \ - r1 = x & RB_MASK; \ - r2 = y & RB_MASK; \ - UN16_rb_ADD_UN16_rb (r1, r2, t); \ - \ - r2 = (x >> G_SHIFT) & RB_MASK; \ - r3 = (y >> G_SHIFT) & RB_MASK; \ - UN16_rb_ADD_UN16_rb (r2, r3, t); \ - \ - x = r1 | (r2 << G_SHIFT); \ - } while (0) diff --git a/pixman/pixman/pixman-compiler.h b/pixman/pixman/pixman-compiler.h index 1a1350ddc..005f60e05 100644 --- a/pixman/pixman/pixman-compiler.h +++ b/pixman/pixman/pixman-compiler.h @@ -1,196 +1,210 @@ -/* Pixman uses some non-standard compiler features. This file ensures - * they exist - * - * The features are: - * - * FUNC must be defined to expand to the current function - * PIXMAN_EXPORT should be defined to whatever is required to - * export functions from a shared library - * limits limits for various types must be defined - * inline must be defined - * force_inline must be defined - */ -#if defined (__GNUC__) -# define FUNC ((const char*) (__PRETTY_FUNCTION__)) -#elif defined (__sun) || (defined (__STDC_VERSION__) && __STDC_VERSION__ >= 199901L) -# define FUNC ((const char*) (__func__)) -#else -# define FUNC ((const char*) ("???")) -#endif - -#ifndef INT16_MIN -# define INT16_MIN (-32767-1) -#endif - -#ifndef INT16_MAX -# define INT16_MAX (32767) -#endif - -#ifndef INT32_MIN -# define INT32_MIN (-2147483647-1) -#endif - -#ifndef INT32_MAX -# define INT32_MAX (2147483647) -#endif - -#ifndef UINT32_MIN -# define UINT32_MIN (0) -#endif - -#ifndef UINT32_MAX -# define UINT32_MAX (4294967295U) -#endif - -#ifndef M_PI -# define M_PI 3.14159265358979323846 -#endif - -#ifdef _MSC_VER -/* 'inline' is available only in C++ in MSVC */ -# define inline __inline -# define force_inline __forceinline -#elif defined __GNUC__ || (defined(__SUNPRO_C) && (__SUNPRO_C >= 0x590)) -# define inline __inline__ -# define force_inline __inline__ __attribute__ ((__always_inline__)) -#else -# ifndef force_inline -# define force_inline inline -# endif -#endif - -/* GCC visibility */ -#if defined(__GNUC__) && __GNUC__ >= 4 -# define PIXMAN_EXPORT __attribute__ ((visibility("default"))) -/* Sun Studio 8 visibility */ -#elif defined(__SUNPRO_C) && (__SUNPRO_C >= 0x550) -# define PIXMAN_EXPORT __global -#else -# define PIXMAN_EXPORT -#endif - -/* TLS */ -#if defined(TOOLCHAIN_SUPPORTS__THREAD) - -# define PIXMAN_DEFINE_THREAD_LOCAL(type, name) \ - static __thread type name -# define PIXMAN_GET_THREAD_LOCAL(name) \ - (&name) - -#elif defined(__MINGW32__) && !defined(__WIN64) - -/* We can't include <windows.h> as it causes carious clashes with - * identifiers in pixman, sigh. So just declare the functions we need - * here. - */ -extern __stdcall long InterlockedCompareExchange(long volatile *, long, long); -#define InterlockedCompareExchangePointer(d,e,c) \ - (void *)InterlockedCompareExchange((long volatile *)(d),(long)(e),(long)(c)) -extern __stdcall int TlsAlloc (void); -extern __stdcall void *TlsGetValue (unsigned); -extern __stdcall int TlsSetValue (unsigned, void *); -extern __stdcall void *CreateMutexA(void *, int, char *); -extern __stdcall int CloseHandle(void *); -extern __stdcall unsigned WaitForSingleObject (void *, unsigned); -extern __stdcall int ReleaseMutex (void *); - -# define PIXMAN_DEFINE_THREAD_LOCAL(type, name) \ - static volatile int tls_ ## name ## _initialized = 0; \ - static void *tls_ ## name ## _mutex = NULL; \ - static unsigned tls_ ## name ## _index; \ - \ - static type * \ - tls_ ## name ## _alloc (void) \ - { \ - type *value = calloc (1, sizeof (type)); \ - if (value) \ - TlsSetValue (tls_ ## name ## _index, value); \ - return value; \ - } \ - \ - static force_inline type * \ - tls_ ## name ## _get (void) \ - { \ - type *value; \ - if (!tls_ ## name ## _initialized) \ - { \ - if (!tls_ ## name ## _mutex) \ - { \ - void *mutex = CreateMutexA (NULL, 0, NULL); \ - if (InterlockedCompareExchangePointer ( \ - &tls_ ## name ## _mutex, mutex, NULL) != NULL) \ - { \ - CloseHandle (mutex); \ - } \ - } \ - WaitForSingleObject (tls_ ## name ## _mutex, 0xFFFFFFFF); \ - if (!tls_ ## name ## _initialized) \ - { \ - tls_ ## name ## _index = TlsAlloc (); \ - tls_ ## name ## _initialized = 1; \ - } \ - ReleaseMutex (tls_ ## name ## _mutex); \ - } \ - if (tls_ ## name ## _index == 0xFFFFFFFF) \ - return NULL; \ - value = TlsGetValue (tls_ ## name ## _index); \ - if (!value) \ - value = tls_ ## name ## _alloc (); \ - return value; \ - } - -# define PIXMAN_GET_THREAD_LOCAL(name) \ - tls_ ## name ## _get () - -#elif defined(_MSC_VER) - -# define PIXMAN_DEFINE_THREAD_LOCAL(type, name) \ - static __declspec(thread) type name -# define PIXMAN_GET_THREAD_LOCAL(name) \ - (&name) - -#elif defined(HAVE_PTHREAD_SETSPECIFIC) - -#include <pthread.h> - -# define PIXMAN_DEFINE_THREAD_LOCAL(type, name) \ - static pthread_once_t tls_ ## name ## _once_control = PTHREAD_ONCE_INIT; \ - static pthread_key_t tls_ ## name ## _key; \ - \ - static void \ - tls_ ## name ## _make_key (void) \ - { \ - pthread_key_create (&tls_ ## name ## _key, NULL); \ - } \ - \ - static type * \ - tls_ ## name ## _alloc (void) \ - { \ - type *value = calloc (1, sizeof (type)); \ - if (value) \ - pthread_setspecific (tls_ ## name ## _key, value); \ - return value; \ - } \ - \ - static force_inline type * \ - tls_ ## name ## _get (void) \ - { \ - type *value = NULL; \ - if (pthread_once (&tls_ ## name ## _once_control, \ - tls_ ## name ## _make_key) == 0) \ - { \ - value = pthread_getspecific (tls_ ## name ## _key); \ - if (!value) \ - value = tls_ ## name ## _alloc (); \ - } \ - return value; \ - } - -# define PIXMAN_GET_THREAD_LOCAL(name) \ - tls_ ## name ## _get () - -#else - -# error "Unknown thread local support for this system" - -#endif +/* Pixman uses some non-standard compiler features. This file ensures
+ * they exist
+ *
+ * The features are:
+ *
+ * FUNC must be defined to expand to the current function
+ * PIXMAN_EXPORT should be defined to whatever is required to
+ * export functions from a shared library
+ * limits limits for various types must be defined
+ * inline must be defined
+ * force_inline must be defined
+ */
+#if defined (__GNUC__)
+# define FUNC ((const char*) (__PRETTY_FUNCTION__))
+#elif defined (__sun) || (defined (__STDC_VERSION__) && __STDC_VERSION__ >= 199901L)
+# define FUNC ((const char*) (__func__))
+#else
+# define FUNC ((const char*) ("???"))
+#endif
+
+#ifndef INT16_MIN
+# define INT16_MIN (-32767-1)
+#endif
+
+#ifndef INT16_MAX
+# define INT16_MAX (32767)
+#endif
+
+#ifndef INT32_MIN
+# define INT32_MIN (-2147483647-1)
+#endif
+
+#ifndef INT32_MAX
+# define INT32_MAX (2147483647)
+#endif
+
+#ifndef UINT32_MIN
+# define UINT32_MIN (0)
+#endif
+
+#ifndef UINT32_MAX
+# define UINT32_MAX (4294967295U)
+#endif
+
+#ifndef M_PI
+# define M_PI 3.14159265358979323846
+#endif
+
+#ifdef _MSC_VER
+/* 'inline' is available only in C++ in MSVC */
+# define inline __inline
+# define force_inline __forceinline
+#elif defined __GNUC__ || (defined(__SUNPRO_C) && (__SUNPRO_C >= 0x590))
+# define inline __inline__
+# define force_inline __inline__ __attribute__ ((__always_inline__))
+#else
+# ifndef force_inline
+# define force_inline inline
+# endif
+#endif
+
+/* GCC visibility */
+#if defined(__GNUC__) && __GNUC__ >= 4
+# define PIXMAN_EXPORT __attribute__ ((visibility("default")))
+/* Sun Studio 8 visibility */
+#elif defined(__SUNPRO_C) && (__SUNPRO_C >= 0x550)
+# define PIXMAN_EXPORT __global
+#else
+# define PIXMAN_EXPORT
+#endif
+
+/* TLS */
+#if defined(PIXMAN_NO_TLS)
+
+# define PIXMAN_DEFINE_THREAD_LOCAL(type, name) \
+ static type name
+# define PIXMAN_GET_THREAD_LOCAL(name) \
+ (&name)
+
+#elif defined(TOOLCHAIN_SUPPORTS__THREAD)
+
+# define PIXMAN_DEFINE_THREAD_LOCAL(type, name) \
+ static __thread type name
+# define PIXMAN_GET_THREAD_LOCAL(name) \
+ (&name)
+
+#elif defined(__MINGW32__) && !defined(__WIN64)
+
+/* We can't include <windows.h> as it causes carious clashes with
+ * identifiers in pixman, sigh. So just declare the functions we need
+ * here.
+ */
+extern __stdcall long InterlockedCompareExchange(long volatile *, long, long);
+#define InterlockedCompareExchangePointer(d,e,c) \
+ (void *)InterlockedCompareExchange((long volatile *)(d),(long)(e),(long)(c))
+extern __stdcall int TlsAlloc (void);
+extern __stdcall void *TlsGetValue (unsigned);
+extern __stdcall int TlsSetValue (unsigned, void *);
+extern __stdcall void *CreateMutexA(void *, int, char *);
+extern __stdcall int CloseHandle(void *);
+extern __stdcall unsigned WaitForSingleObject (void *, unsigned);
+extern __stdcall int ReleaseMutex (void *);
+
+# define PIXMAN_DEFINE_THREAD_LOCAL(type, name) \
+ static volatile int tls_ ## name ## _initialized = 0; \
+ static void *tls_ ## name ## _mutex = NULL; \
+ static unsigned tls_ ## name ## _index; \
+ \
+ static type * \
+ tls_ ## name ## _alloc (void) \
+ { \
+ type *value = calloc (1, sizeof (type)); \
+ if (value) \
+ TlsSetValue (tls_ ## name ## _index, value); \
+ return value; \
+ } \
+ \
+ static force_inline type * \
+ tls_ ## name ## _get (void) \
+ { \
+ type *value; \
+ if (!tls_ ## name ## _initialized) \
+ { \
+ if (!tls_ ## name ## _mutex) \
+ { \
+ void *mutex = CreateMutexA (NULL, 0, NULL); \
+ if (InterlockedCompareExchangePointer ( \
+ &tls_ ## name ## _mutex, mutex, NULL) != NULL) \
+ { \
+ CloseHandle (mutex); \
+ } \
+ } \
+ WaitForSingleObject (tls_ ## name ## _mutex, 0xFFFFFFFF); \
+ if (!tls_ ## name ## _initialized) \
+ { \
+ tls_ ## name ## _index = TlsAlloc (); \
+ tls_ ## name ## _initialized = 1; \
+ } \
+ ReleaseMutex (tls_ ## name ## _mutex); \
+ } \
+ if (tls_ ## name ## _index == 0xFFFFFFFF) \
+ return NULL; \
+ value = TlsGetValue (tls_ ## name ## _index); \
+ if (!value) \
+ value = tls_ ## name ## _alloc (); \
+ return value; \
+ }
+
+# define PIXMAN_GET_THREAD_LOCAL(name) \
+ tls_ ## name ## _get ()
+
+#elif defined(_MSC_VER)
+
+# define PIXMAN_DEFINE_THREAD_LOCAL(type, name) \
+ static __declspec(thread) type name
+# define PIXMAN_GET_THREAD_LOCAL(name) \
+ (&name)
+
+#elif defined(HAVE_PTHREAD_SETSPECIFIC)
+
+#include <pthread.h>
+
+# define PIXMAN_DEFINE_THREAD_LOCAL(type, name) \
+ static pthread_once_t tls_ ## name ## _once_control = PTHREAD_ONCE_INIT; \
+ static pthread_key_t tls_ ## name ## _key; \
+ \
+ static void \
+ tls_ ## name ## _destroy_value (void *value) \
+ { \
+ free (value); \
+ } \
+ \
+ static void \
+ tls_ ## name ## _make_key (void) \
+ { \
+ pthread_key_create (&tls_ ## name ## _key, \
+ tls_ ## name ## _destroy_value); \
+ } \
+ \
+ static type * \
+ tls_ ## name ## _alloc (void) \
+ { \
+ type *value = calloc (1, sizeof (type)); \
+ if (value) \
+ pthread_setspecific (tls_ ## name ## _key, value); \
+ return value; \
+ } \
+ \
+ static force_inline type * \
+ tls_ ## name ## _get (void) \
+ { \
+ type *value = NULL; \
+ if (pthread_once (&tls_ ## name ## _once_control, \
+ tls_ ## name ## _make_key) == 0) \
+ { \
+ value = pthread_getspecific (tls_ ## name ## _key); \
+ if (!value) \
+ value = tls_ ## name ## _alloc (); \
+ } \
+ return value; \
+ }
+
+# define PIXMAN_GET_THREAD_LOCAL(name) \
+ tls_ ## name ## _get ()
+
+#else
+
+# error "Unknown thread local support for this system. Pixman will not work with multiple threads. Define PIXMAN_NO_TLS to acknowledge and accept this limitation and compile pixman without thread-safety support."
+
+#endif
diff --git a/pixman/pixman/pixman-conical-gradient.c b/pixman/pixman/pixman-conical-gradient.c index 0341a8ebf..648f3569d 100644 --- a/pixman/pixman/pixman-conical-gradient.c +++ b/pixman/pixman/pixman-conical-gradient.c @@ -1,184 +1,198 @@ -/* - * Copyright © 2000 SuSE, Inc. - * Copyright © 2007 Red Hat, Inc. - * Copyright © 2000 Keith Packard, member of The XFree86 Project, Inc. - * 2005 Lars Knoll & Zack Rusin, Trolltech - * - * Permission to use, copy, modify, distribute, and sell this software and its - * documentation for any purpose is hereby granted without fee, provided that - * the above copyright notice appear in all copies and that both that - * copyright notice and this permission notice appear in supporting - * documentation, and that the name of Keith Packard not be used in - * advertising or publicity pertaining to distribution of the software without - * specific, written prior permission. Keith Packard makes no - * representations about the suitability of this software for any purpose. It - * is provided "as is" without express or implied warranty. - * - * THE COPYRIGHT HOLDERS DISCLAIM ALL WARRANTIES WITH REGARD TO THIS - * SOFTWARE, INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND - * FITNESS, IN NO EVENT SHALL THE COPYRIGHT HOLDERS BE LIABLE FOR ANY - * SPECIAL, INDIRECT OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES - * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN - * AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING - * OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS - * SOFTWARE. - */ - -#ifdef HAVE_CONFIG_H -#include <config.h> -#endif - -#include <stdlib.h> -#include <math.h> -#include "pixman-private.h" - -static void -conical_gradient_get_scanline_32 (pixman_image_t *image, - int x, - int y, - int width, - uint32_t * buffer, - const uint32_t *mask, - uint32_t mask_bits) -{ - source_image_t *source = (source_image_t *)image; - gradient_t *gradient = (gradient_t *)source; - conical_gradient_t *conical = (conical_gradient_t *)image; - uint32_t *end = buffer + width; - pixman_gradient_walker_t walker; - pixman_bool_t affine = TRUE; - double cx = 1.; - double cy = 0.; - double cz = 0.; - double rx = x + 0.5; - double ry = y + 0.5; - double rz = 1.; - double a = (conical->angle * M_PI) / (180. * 65536); - - _pixman_gradient_walker_init (&walker, gradient, source->common.repeat); - - if (source->common.transform) - { - pixman_vector_t v; - - /* reference point is the center of the pixel */ - v.vector[0] = pixman_int_to_fixed (x) + pixman_fixed_1 / 2; - v.vector[1] = pixman_int_to_fixed (y) + pixman_fixed_1 / 2; - v.vector[2] = pixman_fixed_1; - - if (!pixman_transform_point_3d (source->common.transform, &v)) - return; - - cx = source->common.transform->matrix[0][0] / 65536.; - cy = source->common.transform->matrix[1][0] / 65536.; - cz = source->common.transform->matrix[2][0] / 65536.; - - rx = v.vector[0] / 65536.; - ry = v.vector[1] / 65536.; - rz = v.vector[2] / 65536.; - - affine = - source->common.transform->matrix[2][0] == 0 && - v.vector[2] == pixman_fixed_1; - } - - if (affine) - { - rx -= conical->center.x / 65536.; - ry -= conical->center.y / 65536.; - - while (buffer < end) - { - double angle; - - if (!mask || *mask++ & mask_bits) - { - pixman_fixed_48_16_t t; - - angle = atan2 (ry, rx) + a; - t = (pixman_fixed_48_16_t) (angle * (65536. / (2 * M_PI))); - - *buffer = _pixman_gradient_walker_pixel (&walker, t); - } - - ++buffer; - - rx += cx; - ry += cy; - } - } - else - { - while (buffer < end) - { - double x, y; - double angle; - - if (!mask || *mask++ & mask_bits) - { - pixman_fixed_48_16_t t; - - if (rz != 0) - { - x = rx / rz; - y = ry / rz; - } - else - { - x = y = 0.; - } - - x -= conical->center.x / 65536.; - y -= conical->center.y / 65536.; - - angle = atan2 (y, x) + a; - t = (pixman_fixed_48_16_t) (angle * (65536. / (2 * M_PI))); - - *buffer = _pixman_gradient_walker_pixel (&walker, t); - } - - ++buffer; - - rx += cx; - ry += cy; - rz += cz; - } - } -} - -static void -conical_gradient_property_changed (pixman_image_t *image) -{ - image->common.get_scanline_32 = conical_gradient_get_scanline_32; - image->common.get_scanline_64 = _pixman_image_get_scanline_generic_64; -} - -PIXMAN_EXPORT pixman_image_t * -pixman_image_create_conical_gradient (pixman_point_fixed_t * center, - pixman_fixed_t angle, - const pixman_gradient_stop_t *stops, - int n_stops) -{ - pixman_image_t *image = _pixman_image_allocate (); - conical_gradient_t *conical; - - if (!image) - return NULL; - - conical = &image->conical; - - if (!_pixman_init_gradient (&conical->common, stops, n_stops)) - { - free (image); - return NULL; - } - - image->type = CONICAL; - conical->center = *center; - conical->angle = angle; - - image->common.property_changed = conical_gradient_property_changed; - - return image; -} - +/*
+ * Copyright © 2000 SuSE, Inc.
+ * Copyright © 2007 Red Hat, Inc.
+ * Copyright © 2000 Keith Packard, member of The XFree86 Project, Inc.
+ * 2005 Lars Knoll & Zack Rusin, Trolltech
+ *
+ * Permission to use, copy, modify, distribute, and sell this software and its
+ * documentation for any purpose is hereby granted without fee, provided that
+ * the above copyright notice appear in all copies and that both that
+ * copyright notice and this permission notice appear in supporting
+ * documentation, and that the name of Keith Packard not be used in
+ * advertising or publicity pertaining to distribution of the software without
+ * specific, written prior permission. Keith Packard makes no
+ * representations about the suitability of this software for any purpose. It
+ * is provided "as is" without express or implied warranty.
+ *
+ * THE COPYRIGHT HOLDERS DISCLAIM ALL WARRANTIES WITH REGARD TO THIS
+ * SOFTWARE, INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND
+ * FITNESS, IN NO EVENT SHALL THE COPYRIGHT HOLDERS BE LIABLE FOR ANY
+ * SPECIAL, INDIRECT OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN
+ * AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING
+ * OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS
+ * SOFTWARE.
+ */
+
+#ifdef HAVE_CONFIG_H
+#include <config.h>
+#endif
+
+#include <stdlib.h>
+#include <math.h>
+#include "pixman-private.h"
+
+static force_inline double
+coordinates_to_parameter (double x, double y, double angle)
+{
+ double t;
+
+ t = atan2 (y, x) + angle;
+
+ while (t < 0)
+ t += 2 * M_PI;
+
+ while (t >= 2 * M_PI)
+ t -= 2 * M_PI;
+
+ return 1 - t * (1 / (2 * M_PI)); /* Scale t to [0, 1] and
+ * make rotation CCW
+ */
+}
+
+static void
+conical_gradient_get_scanline_32 (pixman_image_t *image,
+ int x,
+ int y,
+ int width,
+ uint32_t * buffer,
+ const uint32_t *mask)
+{
+ source_image_t *source = (source_image_t *)image;
+ gradient_t *gradient = (gradient_t *)source;
+ conical_gradient_t *conical = (conical_gradient_t *)image;
+ uint32_t *end = buffer + width;
+ pixman_gradient_walker_t walker;
+ pixman_bool_t affine = TRUE;
+ double cx = 1.;
+ double cy = 0.;
+ double cz = 0.;
+ double rx = x + 0.5;
+ double ry = y + 0.5;
+ double rz = 1.;
+
+ _pixman_gradient_walker_init (&walker, gradient, source->common.repeat);
+
+ if (source->common.transform)
+ {
+ pixman_vector_t v;
+
+ /* reference point is the center of the pixel */
+ v.vector[0] = pixman_int_to_fixed (x) + pixman_fixed_1 / 2;
+ v.vector[1] = pixman_int_to_fixed (y) + pixman_fixed_1 / 2;
+ v.vector[2] = pixman_fixed_1;
+
+ if (!pixman_transform_point_3d (source->common.transform, &v))
+ return;
+
+ cx = source->common.transform->matrix[0][0] / 65536.;
+ cy = source->common.transform->matrix[1][0] / 65536.;
+ cz = source->common.transform->matrix[2][0] / 65536.;
+
+ rx = v.vector[0] / 65536.;
+ ry = v.vector[1] / 65536.;
+ rz = v.vector[2] / 65536.;
+
+ affine =
+ source->common.transform->matrix[2][0] == 0 &&
+ v.vector[2] == pixman_fixed_1;
+ }
+
+ if (affine)
+ {
+ rx -= conical->center.x / 65536.;
+ ry -= conical->center.y / 65536.;
+
+ while (buffer < end)
+ {
+ if (!mask || *mask++)
+ {
+ double t = coordinates_to_parameter (rx, ry, conical->angle);
+
+ *buffer = _pixman_gradient_walker_pixel (
+ &walker, (pixman_fixed_48_16_t)pixman_double_to_fixed (t));
+ }
+
+ ++buffer;
+
+ rx += cx;
+ ry += cy;
+ }
+ }
+ else
+ {
+ while (buffer < end)
+ {
+ double x, y;
+
+ if (!mask || *mask++)
+ {
+ double t;
+
+ if (rz != 0)
+ {
+ x = rx / rz;
+ y = ry / rz;
+ }
+ else
+ {
+ x = y = 0.;
+ }
+
+ x -= conical->center.x / 65536.;
+ y -= conical->center.y / 65536.;
+
+ t = coordinates_to_parameter (x, y, conical->angle);
+
+ *buffer = _pixman_gradient_walker_pixel (
+ &walker, (pixman_fixed_48_16_t)pixman_double_to_fixed (t));
+ }
+
+ ++buffer;
+
+ rx += cx;
+ ry += cy;
+ rz += cz;
+ }
+ }
+}
+
+static void
+conical_gradient_property_changed (pixman_image_t *image)
+{
+ image->common.get_scanline_32 = conical_gradient_get_scanline_32;
+ image->common.get_scanline_64 = _pixman_image_get_scanline_generic_64;
+}
+
+PIXMAN_EXPORT pixman_image_t *
+pixman_image_create_conical_gradient (pixman_point_fixed_t * center,
+ pixman_fixed_t angle,
+ const pixman_gradient_stop_t *stops,
+ int n_stops)
+{
+ pixman_image_t *image = _pixman_image_allocate ();
+ conical_gradient_t *conical;
+
+ if (!image)
+ return NULL;
+
+ conical = &image->conical;
+
+ if (!_pixman_init_gradient (&conical->common, stops, n_stops))
+ {
+ free (image);
+ return NULL;
+ }
+
+ angle = MOD (angle, pixman_int_to_fixed (360));
+
+ image->type = CONICAL;
+
+ conical->center = *center;
+ conical->angle = (pixman_fixed_to_double (angle) / 180.0) * M_PI;
+
+ image->common.property_changed = conical_gradient_property_changed;
+
+ return image;
+}
+
diff --git a/pixman/pixman/pixman-cpu.c b/pixman/pixman/pixman-cpu.c index e96b140bd..8032fb42c 100644 --- a/pixman/pixman/pixman-cpu.c +++ b/pixman/pixman/pixman-cpu.c @@ -1,575 +1,598 @@ -/* - * Copyright © 2000 SuSE, Inc. - * Copyright © 2007 Red Hat, Inc. - * - * Permission to use, copy, modify, distribute, and sell this software and its - * documentation for any purpose is hereby granted without fee, provided that - * the above copyright notice appear in all copies and that both that - * copyright notice and this permission notice appear in supporting - * documentation, and that the name of SuSE not be used in advertising or - * publicity pertaining to distribution of the software without specific, - * written prior permission. SuSE makes no representations about the - * suitability of this software for any purpose. It is provided "as is" - * without express or implied warranty. - * - * SuSE DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE, INCLUDING ALL - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO EVENT SHALL SuSE - * BE LIABLE FOR ANY SPECIAL, INDIRECT OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES - * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION - * OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN - * CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. - */ -#ifdef HAVE_CONFIG_H -#include <config.h> -#endif - -#include <string.h> - -#if defined(USE_ARM_SIMD) && defined(_MSC_VER) -/* Needed for EXCEPTION_ILLEGAL_INSTRUCTION */ -#include <windows.h> -#endif - -#include "pixman-private.h" - -#ifdef USE_VMX - -/* The CPU detection code needs to be in a file not compiled with - * "-maltivec -mabi=altivec", as gcc would try to save vector register - * across function calls causing SIGILL on cpus without Altivec/vmx. - */ -static pixman_bool_t initialized = FALSE; -static volatile pixman_bool_t have_vmx = TRUE; - -#ifdef __APPLE__ -#include <sys/sysctl.h> - -static pixman_bool_t -pixman_have_vmx (void) -{ - if (!initialized) - { - size_t length = sizeof(have_vmx); - int error = - sysctlbyname ("hw.optional.altivec", &have_vmx, &length, NULL, 0); - - if (error) - have_vmx = FALSE; - - initialized = TRUE; - } - return have_vmx; -} - -#elif defined (__linux__) -#include <sys/types.h> -#include <sys/stat.h> -#include <fcntl.h> -#include <unistd.h> -#include <stdio.h> -#include <linux/auxvec.h> -#include <asm/cputable.h> - -static pixman_bool_t -pixman_have_vmx (void) -{ - if (!initialized) - { - char fname[64]; - unsigned long buf[64]; - ssize_t count = 0; - pid_t pid; - int fd, i; - - pid = getpid (); - snprintf (fname, sizeof(fname) - 1, "/proc/%d/auxv", pid); - - fd = open (fname, O_RDONLY); - if (fd >= 0) - { - for (i = 0; i <= (count / sizeof(unsigned long)); i += 2) - { - /* Read more if buf is empty... */ - if (i == (count / sizeof(unsigned long))) - { - count = read (fd, buf, sizeof(buf)); - if (count <= 0) - break; - i = 0; - } - - if (buf[i] == AT_HWCAP) - { - have_vmx = !!(buf[i + 1] & PPC_FEATURE_HAS_ALTIVEC); - initialized = TRUE; - break; - } - else if (buf[i] == AT_NULL) - { - break; - } - } - close (fd); - } - } - if (!initialized) - { - /* Something went wrong. Assume 'no' rather than playing - fragile tricks with catching SIGILL. */ - have_vmx = FALSE; - initialized = TRUE; - } - - return have_vmx; -} - -#else /* !__APPLE__ && !__linux__ */ -#include <signal.h> -#include <setjmp.h> - -static jmp_buf jump_env; - -static void -vmx_test (int sig, - siginfo_t *si, - void * unused) -{ - longjmp (jump_env, 1); -} - -static pixman_bool_t -pixman_have_vmx (void) -{ - struct sigaction sa, osa; - int jmp_result; - - if (!initialized) - { - sa.sa_flags = SA_SIGINFO; - sigemptyset (&sa.sa_mask); - sa.sa_sigaction = vmx_test; - sigaction (SIGILL, &sa, &osa); - jmp_result = setjmp (jump_env); - if (jmp_result == 0) - { - asm volatile ( "vor 0, 0, 0" ); - } - sigaction (SIGILL, &osa, NULL); - have_vmx = (jmp_result == 0); - initialized = TRUE; - } - return have_vmx; -} - -#endif /* __APPLE__ */ -#endif /* USE_VMX */ - -#if defined(USE_ARM_SIMD) || defined(USE_ARM_NEON) - -#if defined(_MSC_VER) - -#if defined(USE_ARM_SIMD) -extern int pixman_msvc_try_arm_simd_op (); - -pixman_bool_t -pixman_have_arm_simd (void) -{ - static pixman_bool_t initialized = FALSE; - static pixman_bool_t have_arm_simd = FALSE; - - if (!initialized) - { - __try { - pixman_msvc_try_arm_simd_op (); - have_arm_simd = TRUE; - } __except (GetExceptionCode () == EXCEPTION_ILLEGAL_INSTRUCTION) { - have_arm_simd = FALSE; - } - initialized = TRUE; - } - - return have_arm_simd; -} - -#endif /* USE_ARM_SIMD */ - -#if defined(USE_ARM_NEON) -extern int pixman_msvc_try_arm_neon_op (); - -pixman_bool_t -pixman_have_arm_neon (void) -{ - static pixman_bool_t initialized = FALSE; - static pixman_bool_t have_arm_neon = FALSE; - - if (!initialized) - { - __try - { - pixman_msvc_try_arm_neon_op (); - have_arm_neon = TRUE; - } - __except (GetExceptionCode () == EXCEPTION_ILLEGAL_INSTRUCTION) - { - have_arm_neon = FALSE; - } - initialized = TRUE; - } - - return have_arm_neon; -} - -#endif /* USE_ARM_NEON */ - -#else /* linux ELF */ - -#include <stdlib.h> -#include <unistd.h> -#include <sys/types.h> -#include <sys/stat.h> -#include <sys/mman.h> -#include <fcntl.h> -#include <string.h> -#include <elf.h> - -static pixman_bool_t arm_has_v7 = FALSE; -static pixman_bool_t arm_has_v6 = FALSE; -static pixman_bool_t arm_has_vfp = FALSE; -static pixman_bool_t arm_has_neon = FALSE; -static pixman_bool_t arm_has_iwmmxt = FALSE; -static pixman_bool_t arm_tests_initialized = FALSE; - -static void -pixman_arm_read_auxv () -{ - int fd; - Elf32_auxv_t aux; - - fd = open ("/proc/self/auxv", O_RDONLY); - if (fd >= 0) - { - while (read (fd, &aux, sizeof(Elf32_auxv_t)) == sizeof(Elf32_auxv_t)) - { - if (aux.a_type == AT_HWCAP) - { - uint32_t hwcap = aux.a_un.a_val; - /* hardcode these values to avoid depending on specific - * versions of the hwcap header, e.g. HWCAP_NEON - */ - arm_has_vfp = (hwcap & 64) != 0; - arm_has_iwmmxt = (hwcap & 512) != 0; - /* this flag is only present on kernel 2.6.29 */ - arm_has_neon = (hwcap & 4096) != 0; - } - else if (aux.a_type == AT_PLATFORM) - { - const char *plat = (const char*) aux.a_un.a_val; - if (strncmp (plat, "v7l", 3) == 0) - { - arm_has_v7 = TRUE; - arm_has_v6 = TRUE; - } - else if (strncmp (plat, "v6l", 3) == 0) - { - arm_has_v6 = TRUE; - } - } - } - close (fd); - } - - arm_tests_initialized = TRUE; -} - -#if defined(USE_ARM_SIMD) -pixman_bool_t -pixman_have_arm_simd (void) -{ - if (!arm_tests_initialized) - pixman_arm_read_auxv (); - - return arm_has_v6; -} - -#endif /* USE_ARM_SIMD */ - -#if defined(USE_ARM_NEON) -pixman_bool_t -pixman_have_arm_neon (void) -{ - if (!arm_tests_initialized) - pixman_arm_read_auxv (); - - return arm_has_neon; -} - -#endif /* USE_ARM_NEON */ - -#endif /* linux */ - -#endif /* USE_ARM_SIMD || USE_ARM_NEON */ - -#if defined(USE_MMX) || defined(USE_SSE2) -/* The CPU detection code needs to be in a file not compiled with - * "-mmmx -msse", as gcc would generate CMOV instructions otherwise - * that would lead to SIGILL instructions on old CPUs that don't have - * it. - */ -#if !defined(__amd64__) && !defined(__x86_64__) && !defined(_M_AMD64) - -#ifdef HAVE_GETISAX -#include <sys/auxv.h> -#endif - -typedef enum -{ - NO_FEATURES = 0, - MMX = 0x1, - MMX_EXTENSIONS = 0x2, - SSE = 0x6, - SSE2 = 0x8, - CMOV = 0x10 -} cpu_features_t; - - -static unsigned int -detect_cpu_features (void) -{ - unsigned int features = 0; - unsigned int result = 0; - -#ifdef HAVE_GETISAX - if (getisax (&result, 1)) - { - if (result & AV_386_CMOV) - features |= CMOV; - if (result & AV_386_MMX) - features |= MMX; - if (result & AV_386_AMD_MMX) - features |= MMX_EXTENSIONS; - if (result & AV_386_SSE) - features |= SSE; - if (result & AV_386_SSE2) - features |= SSE2; - } -#else - char vendor[13]; -#ifdef _MSC_VER - int vendor0 = 0, vendor1, vendor2; -#endif - vendor[0] = 0; - vendor[12] = 0; - -#ifdef __GNUC__ - /* see p. 118 of amd64 instruction set manual Vol3 */ - /* We need to be careful about the handling of %ebx and - * %esp here. We can't declare either one as clobbered - * since they are special registers (%ebx is the "PIC - * register" holding an offset to global data, %esp the - * stack pointer), so we need to make sure they have their - * original values when we access the output operands. - */ - __asm__ ( - "pushf\n" - "pop %%eax\n" - "mov %%eax, %%ecx\n" - "xor $0x00200000, %%eax\n" - "push %%eax\n" - "popf\n" - "pushf\n" - "pop %%eax\n" - "mov $0x0, %%edx\n" - "xor %%ecx, %%eax\n" - "jz 1f\n" - - "mov $0x00000000, %%eax\n" - "push %%ebx\n" - "cpuid\n" - "mov %%ebx, %%eax\n" - "pop %%ebx\n" - "mov %%eax, %1\n" - "mov %%edx, %2\n" - "mov %%ecx, %3\n" - "mov $0x00000001, %%eax\n" - "push %%ebx\n" - "cpuid\n" - "pop %%ebx\n" - "1:\n" - "mov %%edx, %0\n" - : "=r" (result), - "=m" (vendor[0]), - "=m" (vendor[4]), - "=m" (vendor[8]) - : - : "%eax", "%ecx", "%edx" - ); - -#elif defined (_MSC_VER) - - _asm { - pushfd - pop eax - mov ecx, eax - xor eax, 00200000h - push eax - popfd - pushfd - pop eax - mov edx, 0 - xor eax, ecx - jz nocpuid - - mov eax, 0 - push ebx - cpuid - mov eax, ebx - pop ebx - mov vendor0, eax - mov vendor1, edx - mov vendor2, ecx - mov eax, 1 - push ebx - cpuid - pop ebx - nocpuid: - mov result, edx - } - memmove (vendor + 0, &vendor0, 4); - memmove (vendor + 4, &vendor1, 4); - memmove (vendor + 8, &vendor2, 4); - -#else -# error unsupported compiler -#endif - - features = 0; - if (result) - { - /* result now contains the standard feature bits */ - if (result & (1 << 15)) - features |= CMOV; - if (result & (1 << 23)) - features |= MMX; - if (result & (1 << 25)) - features |= SSE; - if (result & (1 << 26)) - features |= SSE2; - if ((features & MMX) && !(features & SSE) && - (strcmp (vendor, "AuthenticAMD") == 0 || - strcmp (vendor, "Geode by NSC") == 0)) - { - /* check for AMD MMX extensions */ -#ifdef __GNUC__ - __asm__ ( - " push %%ebx\n" - " mov $0x80000000, %%eax\n" - " cpuid\n" - " xor %%edx, %%edx\n" - " cmp $0x1, %%eax\n" - " jge 2f\n" - " mov $0x80000001, %%eax\n" - " cpuid\n" - "2:\n" - " pop %%ebx\n" - " mov %%edx, %0\n" - : "=r" (result) - : - : "%eax", "%ecx", "%edx" - ); -#elif defined _MSC_VER - _asm { - push ebx - mov eax, 80000000h - cpuid - xor edx, edx - cmp eax, 1 - jge notamd - mov eax, 80000001h - cpuid - notamd: - pop ebx - mov result, edx - } -#endif - if (result & (1 << 22)) - features |= MMX_EXTENSIONS; - } - } -#endif /* HAVE_GETISAX */ - - return features; -} - -static pixman_bool_t -pixman_have_mmx (void) -{ - static pixman_bool_t initialized = FALSE; - static pixman_bool_t mmx_present; - - if (!initialized) - { - unsigned int features = detect_cpu_features (); - mmx_present = (features & (MMX | MMX_EXTENSIONS)) == (MMX | MMX_EXTENSIONS); - initialized = TRUE; - } - - return mmx_present; -} - -#ifdef USE_SSE2 -static pixman_bool_t -pixman_have_sse2 (void) -{ - static pixman_bool_t initialized = FALSE; - static pixman_bool_t sse2_present; - - if (!initialized) - { - unsigned int features = detect_cpu_features (); - sse2_present = (features & (MMX | MMX_EXTENSIONS | SSE | SSE2)) == (MMX | MMX_EXTENSIONS | SSE | SSE2); - initialized = TRUE; - } - - return sse2_present; -} - -#endif - -#else /* __amd64__ */ -#ifdef USE_MMX -#define pixman_have_mmx() TRUE -#endif -#ifdef USE_SSE2 -#define pixman_have_sse2() TRUE -#endif -#endif /* __amd64__ */ -#endif - -pixman_implementation_t * -_pixman_choose_implementation (void) -{ -#ifdef USE_SSE2 - if (pixman_have_sse2 ()) - return _pixman_implementation_create_sse2 (); -#endif -#ifdef USE_MMX - if (pixman_have_mmx ()) - return _pixman_implementation_create_mmx (); -#endif - -#ifdef USE_ARM_NEON - if (pixman_have_arm_neon ()) - return _pixman_implementation_create_arm_neon (); -#endif -#ifdef USE_ARM_SIMD - if (pixman_have_arm_simd ()) - return _pixman_implementation_create_arm_simd (); -#endif -#ifdef USE_VMX - if (pixman_have_vmx ()) - return _pixman_implementation_create_vmx (); -#endif - - return _pixman_implementation_create_fast_path (); -} - +/*
+ * Copyright © 2000 SuSE, Inc.
+ * Copyright © 2007 Red Hat, Inc.
+ *
+ * Permission to use, copy, modify, distribute, and sell this software and its
+ * documentation for any purpose is hereby granted without fee, provided that
+ * the above copyright notice appear in all copies and that both that
+ * copyright notice and this permission notice appear in supporting
+ * documentation, and that the name of SuSE not be used in advertising or
+ * publicity pertaining to distribution of the software without specific,
+ * written prior permission. SuSE makes no representations about the
+ * suitability of this software for any purpose. It is provided "as is"
+ * without express or implied warranty.
+ *
+ * SuSE DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE, INCLUDING ALL
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO EVENT SHALL SuSE
+ * BE LIABLE FOR ANY SPECIAL, INDIRECT OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION
+ * OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN
+ * CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+#ifdef HAVE_CONFIG_H
+#include <config.h>
+#endif
+
+#include <string.h>
+
+#if defined(USE_ARM_SIMD) && defined(_MSC_VER)
+/* Needed for EXCEPTION_ILLEGAL_INSTRUCTION */
+#include <windows.h>
+#endif
+
+#include "pixman-private.h"
+
+#ifdef USE_VMX
+
+/* The CPU detection code needs to be in a file not compiled with
+ * "-maltivec -mabi=altivec", as gcc would try to save vector register
+ * across function calls causing SIGILL on cpus without Altivec/vmx.
+ */
+static pixman_bool_t initialized = FALSE;
+static volatile pixman_bool_t have_vmx = TRUE;
+
+#ifdef __APPLE__
+#include <sys/sysctl.h>
+
+static pixman_bool_t
+pixman_have_vmx (void)
+{
+ if (!initialized)
+ {
+ size_t length = sizeof(have_vmx);
+ int error =
+ sysctlbyname ("hw.optional.altivec", &have_vmx, &length, NULL, 0);
+
+ if (error)
+ have_vmx = FALSE;
+
+ initialized = TRUE;
+ }
+ return have_vmx;
+}
+
+#elif defined (__OpenBSD__)
+#include <sys/param.h>
+#include <sys/sysctl.h>
+#include <machine/cpu.h>
+
+static pixman_bool_t
+pixman_have_vmx (void)
+{
+ if (!initialized)
+ {
+ int mib[2] = { CTL_MACHDEP, CPU_ALTIVEC };
+ size_t length = sizeof(have_vmx);
+ int error =
+ sysctl (mib, 2, &have_vmx, &length, NULL, 0);
+
+ if (error != 0)
+ have_vmx = FALSE;
+
+ initialized = TRUE;
+ }
+ return have_vmx;
+}
+
+#elif defined (__linux__)
+#include <sys/types.h>
+#include <sys/stat.h>
+#include <fcntl.h>
+#include <unistd.h>
+#include <stdio.h>
+#include <linux/auxvec.h>
+#include <asm/cputable.h>
+
+static pixman_bool_t
+pixman_have_vmx (void)
+{
+ if (!initialized)
+ {
+ char fname[64];
+ unsigned long buf[64];
+ ssize_t count = 0;
+ pid_t pid;
+ int fd, i;
+
+ pid = getpid ();
+ snprintf (fname, sizeof(fname) - 1, "/proc/%d/auxv", pid);
+
+ fd = open (fname, O_RDONLY);
+ if (fd >= 0)
+ {
+ for (i = 0; i <= (count / sizeof(unsigned long)); i += 2)
+ {
+ /* Read more if buf is empty... */
+ if (i == (count / sizeof(unsigned long)))
+ {
+ count = read (fd, buf, sizeof(buf));
+ if (count <= 0)
+ break;
+ i = 0;
+ }
+
+ if (buf[i] == AT_HWCAP)
+ {
+ have_vmx = !!(buf[i + 1] & PPC_FEATURE_HAS_ALTIVEC);
+ initialized = TRUE;
+ break;
+ }
+ else if (buf[i] == AT_NULL)
+ {
+ break;
+ }
+ }
+ close (fd);
+ }
+ }
+ if (!initialized)
+ {
+ /* Something went wrong. Assume 'no' rather than playing
+ fragile tricks with catching SIGILL. */
+ have_vmx = FALSE;
+ initialized = TRUE;
+ }
+
+ return have_vmx;
+}
+
+#else /* !__APPLE__ && !__OpenBSD__ && !__linux__ */
+#include <signal.h>
+#include <setjmp.h>
+
+static jmp_buf jump_env;
+
+static void
+vmx_test (int sig,
+ siginfo_t *si,
+ void * unused)
+{
+ longjmp (jump_env, 1);
+}
+
+static pixman_bool_t
+pixman_have_vmx (void)
+{
+ struct sigaction sa, osa;
+ int jmp_result;
+
+ if (!initialized)
+ {
+ sa.sa_flags = SA_SIGINFO;
+ sigemptyset (&sa.sa_mask);
+ sa.sa_sigaction = vmx_test;
+ sigaction (SIGILL, &sa, &osa);
+ jmp_result = setjmp (jump_env);
+ if (jmp_result == 0)
+ {
+ asm volatile ( "vor 0, 0, 0" );
+ }
+ sigaction (SIGILL, &osa, NULL);
+ have_vmx = (jmp_result == 0);
+ initialized = TRUE;
+ }
+ return have_vmx;
+}
+
+#endif /* __APPLE__ */
+#endif /* USE_VMX */
+
+#if defined(USE_ARM_SIMD) || defined(USE_ARM_NEON)
+
+#if defined(_MSC_VER)
+
+#if defined(USE_ARM_SIMD)
+extern int pixman_msvc_try_arm_simd_op ();
+
+pixman_bool_t
+pixman_have_arm_simd (void)
+{
+ static pixman_bool_t initialized = FALSE;
+ static pixman_bool_t have_arm_simd = FALSE;
+
+ if (!initialized)
+ {
+ __try {
+ pixman_msvc_try_arm_simd_op ();
+ have_arm_simd = TRUE;
+ } __except (GetExceptionCode () == EXCEPTION_ILLEGAL_INSTRUCTION) {
+ have_arm_simd = FALSE;
+ }
+ initialized = TRUE;
+ }
+
+ return have_arm_simd;
+}
+
+#endif /* USE_ARM_SIMD */
+
+#if defined(USE_ARM_NEON)
+extern int pixman_msvc_try_arm_neon_op ();
+
+pixman_bool_t
+pixman_have_arm_neon (void)
+{
+ static pixman_bool_t initialized = FALSE;
+ static pixman_bool_t have_arm_neon = FALSE;
+
+ if (!initialized)
+ {
+ __try
+ {
+ pixman_msvc_try_arm_neon_op ();
+ have_arm_neon = TRUE;
+ }
+ __except (GetExceptionCode () == EXCEPTION_ILLEGAL_INSTRUCTION)
+ {
+ have_arm_neon = FALSE;
+ }
+ initialized = TRUE;
+ }
+
+ return have_arm_neon;
+}
+
+#endif /* USE_ARM_NEON */
+
+#else /* linux ELF */
+
+#include <stdlib.h>
+#include <unistd.h>
+#include <sys/types.h>
+#include <sys/stat.h>
+#include <sys/mman.h>
+#include <fcntl.h>
+#include <string.h>
+#include <elf.h>
+
+static pixman_bool_t arm_has_v7 = FALSE;
+static pixman_bool_t arm_has_v6 = FALSE;
+static pixman_bool_t arm_has_vfp = FALSE;
+static pixman_bool_t arm_has_neon = FALSE;
+static pixman_bool_t arm_has_iwmmxt = FALSE;
+static pixman_bool_t arm_tests_initialized = FALSE;
+
+static void
+pixman_arm_read_auxv ()
+{
+ int fd;
+ Elf32_auxv_t aux;
+
+ fd = open ("/proc/self/auxv", O_RDONLY);
+ if (fd >= 0)
+ {
+ while (read (fd, &aux, sizeof(Elf32_auxv_t)) == sizeof(Elf32_auxv_t))
+ {
+ if (aux.a_type == AT_HWCAP)
+ {
+ uint32_t hwcap = aux.a_un.a_val;
+ /* hardcode these values to avoid depending on specific
+ * versions of the hwcap header, e.g. HWCAP_NEON
+ */
+ arm_has_vfp = (hwcap & 64) != 0;
+ arm_has_iwmmxt = (hwcap & 512) != 0;
+ /* this flag is only present on kernel 2.6.29 */
+ arm_has_neon = (hwcap & 4096) != 0;
+ }
+ else if (aux.a_type == AT_PLATFORM)
+ {
+ const char *plat = (const char*) aux.a_un.a_val;
+ if (strncmp (plat, "v7l", 3) == 0)
+ {
+ arm_has_v7 = TRUE;
+ arm_has_v6 = TRUE;
+ }
+ else if (strncmp (plat, "v6l", 3) == 0)
+ {
+ arm_has_v6 = TRUE;
+ }
+ }
+ }
+ close (fd);
+ }
+
+ arm_tests_initialized = TRUE;
+}
+
+#if defined(USE_ARM_SIMD)
+pixman_bool_t
+pixman_have_arm_simd (void)
+{
+ if (!arm_tests_initialized)
+ pixman_arm_read_auxv ();
+
+ return arm_has_v6;
+}
+
+#endif /* USE_ARM_SIMD */
+
+#if defined(USE_ARM_NEON)
+pixman_bool_t
+pixman_have_arm_neon (void)
+{
+ if (!arm_tests_initialized)
+ pixman_arm_read_auxv ();
+
+ return arm_has_neon;
+}
+
+#endif /* USE_ARM_NEON */
+
+#endif /* linux */
+
+#endif /* USE_ARM_SIMD || USE_ARM_NEON */
+
+#if defined(USE_MMX) || defined(USE_SSE2)
+/* The CPU detection code needs to be in a file not compiled with
+ * "-mmmx -msse", as gcc would generate CMOV instructions otherwise
+ * that would lead to SIGILL instructions on old CPUs that don't have
+ * it.
+ */
+#if !defined(__amd64__) && !defined(__x86_64__) && !defined(_M_AMD64)
+
+#ifdef HAVE_GETISAX
+#include <sys/auxv.h>
+#endif
+
+typedef enum
+{
+ NO_FEATURES = 0,
+ MMX = 0x1,
+ MMX_EXTENSIONS = 0x2,
+ SSE = 0x6,
+ SSE2 = 0x8,
+ CMOV = 0x10
+} cpu_features_t;
+
+
+static unsigned int
+detect_cpu_features (void)
+{
+ unsigned int features = 0;
+ unsigned int result = 0;
+
+#ifdef HAVE_GETISAX
+ if (getisax (&result, 1))
+ {
+ if (result & AV_386_CMOV)
+ features |= CMOV;
+ if (result & AV_386_MMX)
+ features |= MMX;
+ if (result & AV_386_AMD_MMX)
+ features |= MMX_EXTENSIONS;
+ if (result & AV_386_SSE)
+ features |= SSE;
+ if (result & AV_386_SSE2)
+ features |= SSE2;
+ }
+#else
+ char vendor[13];
+#ifdef _MSC_VER
+ int vendor0 = 0, vendor1, vendor2;
+#endif
+ vendor[0] = 0;
+ vendor[12] = 0;
+
+#ifdef __GNUC__
+ /* see p. 118 of amd64 instruction set manual Vol3 */
+ /* We need to be careful about the handling of %ebx and
+ * %esp here. We can't declare either one as clobbered
+ * since they are special registers (%ebx is the "PIC
+ * register" holding an offset to global data, %esp the
+ * stack pointer), so we need to make sure they have their
+ * original values when we access the output operands.
+ */
+ __asm__ (
+ "pushf\n"
+ "pop %%eax\n"
+ "mov %%eax, %%ecx\n"
+ "xor $0x00200000, %%eax\n"
+ "push %%eax\n"
+ "popf\n"
+ "pushf\n"
+ "pop %%eax\n"
+ "mov $0x0, %%edx\n"
+ "xor %%ecx, %%eax\n"
+ "jz 1f\n"
+
+ "mov $0x00000000, %%eax\n"
+ "push %%ebx\n"
+ "cpuid\n"
+ "mov %%ebx, %%eax\n"
+ "pop %%ebx\n"
+ "mov %%eax, %1\n"
+ "mov %%edx, %2\n"
+ "mov %%ecx, %3\n"
+ "mov $0x00000001, %%eax\n"
+ "push %%ebx\n"
+ "cpuid\n"
+ "pop %%ebx\n"
+ "1:\n"
+ "mov %%edx, %0\n"
+ : "=r" (result),
+ "=m" (vendor[0]),
+ "=m" (vendor[4]),
+ "=m" (vendor[8])
+ :
+ : "%eax", "%ecx", "%edx"
+ );
+
+#elif defined (_MSC_VER)
+
+ _asm {
+ pushfd
+ pop eax
+ mov ecx, eax
+ xor eax, 00200000h
+ push eax
+ popfd
+ pushfd
+ pop eax
+ mov edx, 0
+ xor eax, ecx
+ jz nocpuid
+
+ mov eax, 0
+ push ebx
+ cpuid
+ mov eax, ebx
+ pop ebx
+ mov vendor0, eax
+ mov vendor1, edx
+ mov vendor2, ecx
+ mov eax, 1
+ push ebx
+ cpuid
+ pop ebx
+ nocpuid:
+ mov result, edx
+ }
+ memmove (vendor + 0, &vendor0, 4);
+ memmove (vendor + 4, &vendor1, 4);
+ memmove (vendor + 8, &vendor2, 4);
+
+#else
+# error unsupported compiler
+#endif
+
+ features = 0;
+ if (result)
+ {
+ /* result now contains the standard feature bits */
+ if (result & (1 << 15))
+ features |= CMOV;
+ if (result & (1 << 23))
+ features |= MMX;
+ if (result & (1 << 25))
+ features |= SSE;
+ if (result & (1 << 26))
+ features |= SSE2;
+ if ((features & MMX) && !(features & SSE) &&
+ (strcmp (vendor, "AuthenticAMD") == 0 ||
+ strcmp (vendor, "Geode by NSC") == 0))
+ {
+ /* check for AMD MMX extensions */
+#ifdef __GNUC__
+ __asm__ (
+ " push %%ebx\n"
+ " mov $0x80000000, %%eax\n"
+ " cpuid\n"
+ " xor %%edx, %%edx\n"
+ " cmp $0x1, %%eax\n"
+ " jge 2f\n"
+ " mov $0x80000001, %%eax\n"
+ " cpuid\n"
+ "2:\n"
+ " pop %%ebx\n"
+ " mov %%edx, %0\n"
+ : "=r" (result)
+ :
+ : "%eax", "%ecx", "%edx"
+ );
+#elif defined _MSC_VER
+ _asm {
+ push ebx
+ mov eax, 80000000h
+ cpuid
+ xor edx, edx
+ cmp eax, 1
+ jge notamd
+ mov eax, 80000001h
+ cpuid
+ notamd:
+ pop ebx
+ mov result, edx
+ }
+#endif
+ if (result & (1 << 22))
+ features |= MMX_EXTENSIONS;
+ }
+ }
+#endif /* HAVE_GETISAX */
+
+ return features;
+}
+
+static pixman_bool_t
+pixman_have_mmx (void)
+{
+ static pixman_bool_t initialized = FALSE;
+ static pixman_bool_t mmx_present;
+
+ if (!initialized)
+ {
+ unsigned int features = detect_cpu_features ();
+ mmx_present = (features & (MMX | MMX_EXTENSIONS)) == (MMX | MMX_EXTENSIONS);
+ initialized = TRUE;
+ }
+
+ return mmx_present;
+}
+
+#ifdef USE_SSE2
+static pixman_bool_t
+pixman_have_sse2 (void)
+{
+ static pixman_bool_t initialized = FALSE;
+ static pixman_bool_t sse2_present;
+
+ if (!initialized)
+ {
+ unsigned int features = detect_cpu_features ();
+ sse2_present = (features & (MMX | MMX_EXTENSIONS | SSE | SSE2)) == (MMX | MMX_EXTENSIONS | SSE | SSE2);
+ initialized = TRUE;
+ }
+
+ return sse2_present;
+}
+
+#endif
+
+#else /* __amd64__ */
+#ifdef USE_MMX
+#define pixman_have_mmx() TRUE
+#endif
+#ifdef USE_SSE2
+#define pixman_have_sse2() TRUE
+#endif
+#endif /* __amd64__ */
+#endif
+
+pixman_implementation_t *
+_pixman_choose_implementation (void)
+{
+#ifdef USE_SSE2
+ if (pixman_have_sse2 ())
+ return _pixman_implementation_create_sse2 ();
+#endif
+#ifdef USE_MMX
+ if (pixman_have_mmx ())
+ return _pixman_implementation_create_mmx ();
+#endif
+
+#ifdef USE_ARM_NEON
+ if (pixman_have_arm_neon ())
+ return _pixman_implementation_create_arm_neon ();
+#endif
+#ifdef USE_ARM_SIMD
+ if (pixman_have_arm_simd ())
+ return _pixman_implementation_create_arm_simd ();
+#endif
+#ifdef USE_VMX
+ if (pixman_have_vmx ())
+ return _pixman_implementation_create_vmx ();
+#endif
+
+ return _pixman_implementation_create_fast_path ();
+}
+
diff --git a/pixman/pixman/pixman-fast-path.c b/pixman/pixman/pixman-fast-path.c index bf5b298c8..cd39980fc 100644 --- a/pixman/pixman/pixman-fast-path.c +++ b/pixman/pixman/pixman-fast-path.c @@ -1,2000 +1,2063 @@ -/* -*- Mode: c; c-basic-offset: 4; tab-width: 8; indent-tabs-mode: t; -*- */ -/* - * Copyright © 2000 SuSE, Inc. - * Copyright © 2007 Red Hat, Inc. - * - * Permission to use, copy, modify, distribute, and sell this software and its - * documentation for any purpose is hereby granted without fee, provided that - * the above copyright notice appear in all copies and that both that - * copyright notice and this permission notice appear in supporting - * documentation, and that the name of SuSE not be used in advertising or - * publicity pertaining to distribution of the software without specific, - * written prior permission. SuSE makes no representations about the - * suitability of this software for any purpose. It is provided "as is" - * without express or implied warranty. - * - * SuSE DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE, INCLUDING ALL - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO EVENT SHALL SuSE - * BE LIABLE FOR ANY SPECIAL, INDIRECT OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES - * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION - * OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN - * CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. - * - * Author: Keith Packard, SuSE, Inc. - */ - -#ifdef HAVE_CONFIG_H -#include <config.h> -#endif -#include <string.h> -#include <stdlib.h> -#include "pixman-private.h" -#include "pixman-combine32.h" - -static force_inline uint32_t -fetch_24 (uint8_t *a) -{ - if (((unsigned long)a) & 1) - { -#ifdef WORDS_BIGENDIAN - return (*a << 16) | (*(uint16_t *)(a + 1)); -#else - return *a | (*(uint16_t *)(a + 1) << 8); -#endif - } - else - { -#ifdef WORDS_BIGENDIAN - return (*(uint16_t *)a << 8) | *(a + 2); -#else - return *(uint16_t *)a | (*(a + 2) << 16); -#endif - } -} - -static force_inline void -store_24 (uint8_t *a, - uint32_t v) -{ - if (((unsigned long)a) & 1) - { -#ifdef WORDS_BIGENDIAN - *a = (uint8_t) (v >> 16); - *(uint16_t *)(a + 1) = (uint16_t) (v); -#else - *a = (uint8_t) (v); - *(uint16_t *)(a + 1) = (uint16_t) (v >> 8); -#endif - } - else - { -#ifdef WORDS_BIGENDIAN - *(uint16_t *)a = (uint16_t)(v >> 8); - *(a + 2) = (uint8_t)v; -#else - *(uint16_t *)a = (uint16_t)v; - *(a + 2) = (uint8_t)(v >> 16); -#endif - } -} - -static force_inline uint32_t -over (uint32_t src, - uint32_t dest) -{ - uint32_t a = ~src >> 24; - - UN8x4_MUL_UN8_ADD_UN8x4 (dest, a, src); - - return dest; -} - -static uint32_t -in (uint32_t x, - uint8_t y) -{ - uint16_t a = y; - - UN8x4_MUL_UN8 (x, a); - - return x; -} - -/* - * Naming convention: - * - * op_src_mask_dest - */ -static void -fast_composite_over_x888_8_8888 (pixman_implementation_t *imp, - pixman_op_t op, - pixman_image_t * src_image, - pixman_image_t * mask_image, - pixman_image_t * dst_image, - int32_t src_x, - int32_t src_y, - int32_t mask_x, - int32_t mask_y, - int32_t dest_x, - int32_t dest_y, - int32_t width, - int32_t height) -{ - uint32_t *src, *src_line; - uint32_t *dst, *dst_line; - uint8_t *mask, *mask_line; - int src_stride, mask_stride, dst_stride; - uint8_t m; - uint32_t s, d; - int32_t w; - - PIXMAN_IMAGE_GET_LINE (dst_image, dest_x, dest_y, uint32_t, dst_stride, dst_line, 1); - PIXMAN_IMAGE_GET_LINE (mask_image, mask_x, mask_y, uint8_t, mask_stride, mask_line, 1); - PIXMAN_IMAGE_GET_LINE (src_image, src_x, src_y, uint32_t, src_stride, src_line, 1); - - while (height--) - { - src = src_line; - src_line += src_stride; - dst = dst_line; - dst_line += dst_stride; - mask = mask_line; - mask_line += mask_stride; - - w = width; - while (w--) - { - m = *mask++; - if (m) - { - s = *src | 0xff000000; - - if (m == 0xff) - { - *dst = s; - } - else - { - d = in (s, m); - *dst = over (d, *dst); - } - } - src++; - dst++; - } - } -} - -static void -fast_composite_in_n_8_8 (pixman_implementation_t *imp, - pixman_op_t op, - pixman_image_t * src_image, - pixman_image_t * mask_image, - pixman_image_t * dest_image, - int32_t src_x, - int32_t src_y, - int32_t mask_x, - int32_t mask_y, - int32_t dest_x, - int32_t dest_y, - int32_t width, - int32_t height) -{ - uint32_t src, srca; - uint8_t *dst_line, *dst; - uint8_t *mask_line, *mask, m; - int dst_stride, mask_stride; - int32_t w; - uint16_t t; - - src = _pixman_image_get_solid (src_image, dest_image->bits.format); - - srca = src >> 24; - - PIXMAN_IMAGE_GET_LINE (dest_image, dest_x, dest_y, uint8_t, dst_stride, dst_line, 1); - PIXMAN_IMAGE_GET_LINE (mask_image, mask_x, mask_y, uint8_t, mask_stride, mask_line, 1); - - if (srca == 0xff) - { - while (height--) - { - dst = dst_line; - dst_line += dst_stride; - mask = mask_line; - mask_line += mask_stride; - w = width; - - while (w--) - { - m = *mask++; - - if (m == 0) - *dst = 0; - else if (m != 0xff) - *dst = MUL_UN8 (m, *dst, t); - - dst++; - } - } - } - else - { - while (height--) - { - dst = dst_line; - dst_line += dst_stride; - mask = mask_line; - mask_line += mask_stride; - w = width; - - while (w--) - { - m = *mask++; - m = MUL_UN8 (m, srca, t); - - if (m == 0) - *dst = 0; - else if (m != 0xff) - *dst = MUL_UN8 (m, *dst, t); - - dst++; - } - } - } -} - -static void -fast_composite_in_8_8 (pixman_implementation_t *imp, - pixman_op_t op, - pixman_image_t * src_image, - pixman_image_t * mask_image, - pixman_image_t * dest_image, - int32_t src_x, - int32_t src_y, - int32_t mask_x, - int32_t mask_y, - int32_t dest_x, - int32_t dest_y, - int32_t width, - int32_t height) -{ - uint8_t *dst_line, *dst; - uint8_t *src_line, *src; - int dst_stride, src_stride; - int32_t w; - uint8_t s; - uint16_t t; - - PIXMAN_IMAGE_GET_LINE (src_image, src_x, src_y, uint8_t, src_stride, src_line, 1); - PIXMAN_IMAGE_GET_LINE (dest_image, dest_x, dest_y, uint8_t, dst_stride, dst_line, 1); - - while (height--) - { - dst = dst_line; - dst_line += dst_stride; - src = src_line; - src_line += src_stride; - w = width; - - while (w--) - { - s = *src++; - - if (s == 0) - *dst = 0; - else if (s != 0xff) - *dst = MUL_UN8 (s, *dst, t); - - dst++; - } - } -} - -static void -fast_composite_over_n_8_8888 (pixman_implementation_t *imp, - pixman_op_t op, - pixman_image_t * src_image, - pixman_image_t * mask_image, - pixman_image_t * dst_image, - int32_t src_x, - int32_t src_y, - int32_t mask_x, - int32_t mask_y, - int32_t dest_x, - int32_t dest_y, - int32_t width, - int32_t height) -{ - uint32_t src, srca; - uint32_t *dst_line, *dst, d; - uint8_t *mask_line, *mask, m; - int dst_stride, mask_stride; - int32_t w; - - src = _pixman_image_get_solid (src_image, dst_image->bits.format); - - srca = src >> 24; - if (src == 0) - return; - - PIXMAN_IMAGE_GET_LINE (dst_image, dest_x, dest_y, uint32_t, dst_stride, dst_line, 1); - PIXMAN_IMAGE_GET_LINE (mask_image, mask_x, mask_y, uint8_t, mask_stride, mask_line, 1); - - while (height--) - { - dst = dst_line; - dst_line += dst_stride; - mask = mask_line; - mask_line += mask_stride; - w = width; - - while (w--) - { - m = *mask++; - if (m == 0xff) - { - if (srca == 0xff) - *dst = src; - else - *dst = over (src, *dst); - } - else if (m) - { - d = in (src, m); - *dst = over (d, *dst); - } - dst++; - } - } -} - -static void -fast_composite_add_n_8888_8888_ca (pixman_implementation_t *imp, - pixman_op_t op, - pixman_image_t * src_image, - pixman_image_t * mask_image, - pixman_image_t * dst_image, - int32_t src_x, - int32_t src_y, - int32_t mask_x, - int32_t mask_y, - int32_t dest_x, - int32_t dest_y, - int32_t width, - int32_t height) -{ - uint32_t src, srca, s; - uint32_t *dst_line, *dst, d; - uint32_t *mask_line, *mask, ma; - int dst_stride, mask_stride; - int32_t w; - - src = _pixman_image_get_solid (src_image, dst_image->bits.format); - - srca = src >> 24; - if (src == 0) - return; - - PIXMAN_IMAGE_GET_LINE (dst_image, dest_x, dest_y, uint32_t, dst_stride, dst_line, 1); - PIXMAN_IMAGE_GET_LINE (mask_image, mask_x, mask_y, uint32_t, mask_stride, mask_line, 1); - - while (height--) - { - dst = dst_line; - dst_line += dst_stride; - mask = mask_line; - mask_line += mask_stride; - w = width; - - while (w--) - { - ma = *mask++; - - if (ma) - { - d = *dst; - s = src; - - UN8x4_MUL_UN8x4_ADD_UN8x4 (s, ma, d); - - *dst = s; - } - - dst++; - } - } -} - -static void -fast_composite_over_n_8888_8888_ca (pixman_implementation_t *imp, - pixman_op_t op, - pixman_image_t * src_image, - pixman_image_t * mask_image, - pixman_image_t * dst_image, - int32_t src_x, - int32_t src_y, - int32_t mask_x, - int32_t mask_y, - int32_t dest_x, - int32_t dest_y, - int32_t width, - int32_t height) -{ - uint32_t src, srca, s; - uint32_t *dst_line, *dst, d; - uint32_t *mask_line, *mask, ma; - int dst_stride, mask_stride; - int32_t w; - - src = _pixman_image_get_solid (src_image, dst_image->bits.format); - - srca = src >> 24; - if (src == 0) - return; - - PIXMAN_IMAGE_GET_LINE (dst_image, dest_x, dest_y, uint32_t, dst_stride, dst_line, 1); - PIXMAN_IMAGE_GET_LINE (mask_image, mask_x, mask_y, uint32_t, mask_stride, mask_line, 1); - - while (height--) - { - dst = dst_line; - dst_line += dst_stride; - mask = mask_line; - mask_line += mask_stride; - w = width; - - while (w--) - { - ma = *mask++; - if (ma == 0xffffffff) - { - if (srca == 0xff) - *dst = src; - else - *dst = over (src, *dst); - } - else if (ma) - { - d = *dst; - s = src; - - UN8x4_MUL_UN8x4 (s, ma); - UN8x4_MUL_UN8 (ma, srca); - ma = ~ma; - UN8x4_MUL_UN8x4_ADD_UN8x4 (d, ma, s); - - *dst = d; - } - - dst++; - } - } -} - -static void -fast_composite_over_n_8_0888 (pixman_implementation_t *imp, - pixman_op_t op, - pixman_image_t * src_image, - pixman_image_t * mask_image, - pixman_image_t * dst_image, - int32_t src_x, - int32_t src_y, - int32_t mask_x, - int32_t mask_y, - int32_t dest_x, - int32_t dest_y, - int32_t width, - int32_t height) -{ - uint32_t src, srca; - uint8_t *dst_line, *dst; - uint32_t d; - uint8_t *mask_line, *mask, m; - int dst_stride, mask_stride; - int32_t w; - - src = _pixman_image_get_solid (src_image, dst_image->bits.format); - - srca = src >> 24; - if (src == 0) - return; - - PIXMAN_IMAGE_GET_LINE (dst_image, dest_x, dest_y, uint8_t, dst_stride, dst_line, 3); - PIXMAN_IMAGE_GET_LINE (mask_image, mask_x, mask_y, uint8_t, mask_stride, mask_line, 1); - - while (height--) - { - dst = dst_line; - dst_line += dst_stride; - mask = mask_line; - mask_line += mask_stride; - w = width; - - while (w--) - { - m = *mask++; - if (m == 0xff) - { - if (srca == 0xff) - { - d = src; - } - else - { - d = fetch_24 (dst); - d = over (src, d); - } - store_24 (dst, d); - } - else if (m) - { - d = over (in (src, m), fetch_24 (dst)); - store_24 (dst, d); - } - dst += 3; - } - } -} - -static void -fast_composite_over_n_8_0565 (pixman_implementation_t *imp, - pixman_op_t op, - pixman_image_t * src_image, - pixman_image_t * mask_image, - pixman_image_t * dst_image, - int32_t src_x, - int32_t src_y, - int32_t mask_x, - int32_t mask_y, - int32_t dest_x, - int32_t dest_y, - int32_t width, - int32_t height) -{ - uint32_t src, srca; - uint16_t *dst_line, *dst; - uint32_t d; - uint8_t *mask_line, *mask, m; - int dst_stride, mask_stride; - int32_t w; - - src = _pixman_image_get_solid (src_image, dst_image->bits.format); - - srca = src >> 24; - if (src == 0) - return; - - PIXMAN_IMAGE_GET_LINE (dst_image, dest_x, dest_y, uint16_t, dst_stride, dst_line, 1); - PIXMAN_IMAGE_GET_LINE (mask_image, mask_x, mask_y, uint8_t, mask_stride, mask_line, 1); - - while (height--) - { - dst = dst_line; - dst_line += dst_stride; - mask = mask_line; - mask_line += mask_stride; - w = width; - - while (w--) - { - m = *mask++; - if (m == 0xff) - { - if (srca == 0xff) - { - d = src; - } - else - { - d = *dst; - d = over (src, CONVERT_0565_TO_0888 (d)); - } - *dst = CONVERT_8888_TO_0565 (d); - } - else if (m) - { - d = *dst; - d = over (in (src, m), CONVERT_0565_TO_0888 (d)); - *dst = CONVERT_8888_TO_0565 (d); - } - dst++; - } - } -} - -static void -fast_composite_over_n_8888_0565_ca (pixman_implementation_t *imp, - pixman_op_t op, - pixman_image_t * src_image, - pixman_image_t * mask_image, - pixman_image_t * dst_image, - int32_t src_x, - int32_t src_y, - int32_t mask_x, - int32_t mask_y, - int32_t dest_x, - int32_t dest_y, - int32_t width, - int32_t height) -{ - uint32_t src, srca, s; - uint16_t src16; - uint16_t *dst_line, *dst; - uint32_t d; - uint32_t *mask_line, *mask, ma; - int dst_stride, mask_stride; - int32_t w; - - src = _pixman_image_get_solid (src_image, dst_image->bits.format); - - srca = src >> 24; - if (src == 0) - return; - - src16 = CONVERT_8888_TO_0565 (src); - - PIXMAN_IMAGE_GET_LINE (dst_image, dest_x, dest_y, uint16_t, dst_stride, dst_line, 1); - PIXMAN_IMAGE_GET_LINE (mask_image, mask_x, mask_y, uint32_t, mask_stride, mask_line, 1); - - while (height--) - { - dst = dst_line; - dst_line += dst_stride; - mask = mask_line; - mask_line += mask_stride; - w = width; - - while (w--) - { - ma = *mask++; - if (ma == 0xffffffff) - { - if (srca == 0xff) - { - *dst = src16; - } - else - { - d = *dst; - d = over (src, CONVERT_0565_TO_0888 (d)); - *dst = CONVERT_8888_TO_0565 (d); - } - } - else if (ma) - { - d = *dst; - d = CONVERT_0565_TO_0888 (d); - - s = src; - - UN8x4_MUL_UN8x4 (s, ma); - UN8x4_MUL_UN8 (ma, srca); - ma = ~ma; - UN8x4_MUL_UN8x4_ADD_UN8x4 (d, ma, s); - - *dst = CONVERT_8888_TO_0565 (d); - } - dst++; - } - } -} - -static void -fast_composite_over_8888_8888 (pixman_implementation_t *imp, - pixman_op_t op, - pixman_image_t * src_image, - pixman_image_t * mask_image, - pixman_image_t * dst_image, - int32_t src_x, - int32_t src_y, - int32_t mask_x, - int32_t mask_y, - int32_t dest_x, - int32_t dest_y, - int32_t width, - int32_t height) -{ - uint32_t *dst_line, *dst; - uint32_t *src_line, *src, s; - int dst_stride, src_stride; - uint8_t a; - int32_t w; - - PIXMAN_IMAGE_GET_LINE (dst_image, dest_x, dest_y, uint32_t, dst_stride, dst_line, 1); - PIXMAN_IMAGE_GET_LINE (src_image, src_x, src_y, uint32_t, src_stride, src_line, 1); - - while (height--) - { - dst = dst_line; - dst_line += dst_stride; - src = src_line; - src_line += src_stride; - w = width; - - while (w--) - { - s = *src++; - a = s >> 24; - if (a == 0xff) - *dst = s; - else if (s) - *dst = over (s, *dst); - dst++; - } - } -} - -#if 0 -static void -fast_composite_over_8888_0888 (pixman_implementation_t *imp, - pixman_op_t op, - pixman_image_t * src_image, - pixman_image_t * mask_image, - pixman_image_t * dst_image, - int32_t src_x, - int32_t src_y, - int32_t mask_x, - int32_t mask_y, - int32_t dest_x, - int32_t dest_y, - int32_t width, - int32_t height) -{ - uint8_t *dst_line, *dst; - uint32_t d; - uint32_t *src_line, *src, s; - uint8_t a; - int dst_stride, src_stride; - int32_t w; - - PIXMAN_IMAGE_GET_LINE (dst_image, dest_x, dest_y, uint8_t, dst_stride, dst_line, 3); - PIXMAN_IMAGE_GET_LINE (src_image, src_x, src_y, uint32_t, src_stride, src_line, 1); - - while (height--) - { - dst = dst_line; - dst_line += dst_stride; - src = src_line; - src_line += src_stride; - w = width; - - while (w--) - { - s = *src++; - a = s >> 24; - if (a) - { - if (a == 0xff) - d = s; - else - d = over (s, fetch_24 (dst)); - - store_24 (dst, d); - } - dst += 3; - } - } -} -#endif - -static void -fast_composite_over_8888_0565 (pixman_implementation_t *imp, - pixman_op_t op, - pixman_image_t * src_image, - pixman_image_t * mask_image, - pixman_image_t * dst_image, - int32_t src_x, - int32_t src_y, - int32_t mask_x, - int32_t mask_y, - int32_t dest_x, - int32_t dest_y, - int32_t width, - int32_t height) -{ - uint16_t *dst_line, *dst; - uint32_t d; - uint32_t *src_line, *src, s; - uint8_t a; - int dst_stride, src_stride; - int32_t w; - - PIXMAN_IMAGE_GET_LINE (src_image, src_x, src_y, uint32_t, src_stride, src_line, 1); - PIXMAN_IMAGE_GET_LINE (dst_image, dest_x, dest_y, uint16_t, dst_stride, dst_line, 1); - - while (height--) - { - dst = dst_line; - dst_line += dst_stride; - src = src_line; - src_line += src_stride; - w = width; - - while (w--) - { - s = *src++; - a = s >> 24; - if (s) - { - if (a == 0xff) - { - d = s; - } - else - { - d = *dst; - d = over (s, CONVERT_0565_TO_0888 (d)); - } - *dst = CONVERT_8888_TO_0565 (d); - } - dst++; - } - } -} - -static void -fast_composite_src_x888_0565 (pixman_implementation_t *imp, - pixman_op_t op, - pixman_image_t * src_image, - pixman_image_t * mask_image, - pixman_image_t * dst_image, - int32_t src_x, - int32_t src_y, - int32_t mask_x, - int32_t mask_y, - int32_t dest_x, - int32_t dest_y, - int32_t width, - int32_t height) -{ - uint16_t *dst_line, *dst; - uint32_t *src_line, *src, s; - int dst_stride, src_stride; - int32_t w; - - PIXMAN_IMAGE_GET_LINE (src_image, src_x, src_y, uint32_t, src_stride, src_line, 1); - PIXMAN_IMAGE_GET_LINE (dst_image, dest_x, dest_y, uint16_t, dst_stride, dst_line, 1); - - while (height--) - { - dst = dst_line; - dst_line += dst_stride; - src = src_line; - src_line += src_stride; - w = width; - - while (w--) - { - s = *src++; - *dst = CONVERT_8888_TO_0565 (s); - dst++; - } - } -} - -static void -fast_composite_add_8000_8000 (pixman_implementation_t *imp, - pixman_op_t op, - pixman_image_t * src_image, - pixman_image_t * mask_image, - pixman_image_t * dst_image, - int32_t src_x, - int32_t src_y, - int32_t mask_x, - int32_t mask_y, - int32_t dest_x, - int32_t dest_y, - int32_t width, - int32_t height) -{ - uint8_t *dst_line, *dst; - uint8_t *src_line, *src; - int dst_stride, src_stride; - int32_t w; - uint8_t s, d; - uint16_t t; - - PIXMAN_IMAGE_GET_LINE (src_image, src_x, src_y, uint8_t, src_stride, src_line, 1); - PIXMAN_IMAGE_GET_LINE (dst_image, dest_x, dest_y, uint8_t, dst_stride, dst_line, 1); - - while (height--) - { - dst = dst_line; - dst_line += dst_stride; - src = src_line; - src_line += src_stride; - w = width; - - while (w--) - { - s = *src++; - if (s) - { - if (s != 0xff) - { - d = *dst; - t = d + s; - s = t | (0 - (t >> 8)); - } - *dst = s; - } - dst++; - } - } -} - -static void -fast_composite_add_8888_8888 (pixman_implementation_t *imp, - pixman_op_t op, - pixman_image_t * src_image, - pixman_image_t * mask_image, - pixman_image_t * dst_image, - int32_t src_x, - int32_t src_y, - int32_t mask_x, - int32_t mask_y, - int32_t dest_x, - int32_t dest_y, - int32_t width, - int32_t height) -{ - uint32_t *dst_line, *dst; - uint32_t *src_line, *src; - int dst_stride, src_stride; - int32_t w; - uint32_t s, d; - - PIXMAN_IMAGE_GET_LINE (src_image, src_x, src_y, uint32_t, src_stride, src_line, 1); - PIXMAN_IMAGE_GET_LINE (dst_image, dest_x, dest_y, uint32_t, dst_stride, dst_line, 1); - - while (height--) - { - dst = dst_line; - dst_line += dst_stride; - src = src_line; - src_line += src_stride; - w = width; - - while (w--) - { - s = *src++; - if (s) - { - if (s != 0xffffffff) - { - d = *dst; - if (d) - UN8x4_ADD_UN8x4 (s, d); - } - *dst = s; - } - dst++; - } - } -} - -static void -fast_composite_add_n_8_8 (pixman_implementation_t *imp, - pixman_op_t op, - pixman_image_t * src_image, - pixman_image_t * mask_image, - pixman_image_t * dst_image, - int32_t src_x, - int32_t src_y, - int32_t mask_x, - int32_t mask_y, - int32_t dest_x, - int32_t dest_y, - int32_t width, - int32_t height) -{ - uint8_t *dst_line, *dst; - uint8_t *mask_line, *mask; - int dst_stride, mask_stride; - int32_t w; - uint32_t src; - uint8_t sa; - - PIXMAN_IMAGE_GET_LINE (dst_image, dest_x, dest_y, uint8_t, dst_stride, dst_line, 1); - PIXMAN_IMAGE_GET_LINE (mask_image, mask_x, mask_y, uint8_t, mask_stride, mask_line, 1); - src = _pixman_image_get_solid (src_image, dst_image->bits.format); - sa = (src >> 24); - - while (height--) - { - dst = dst_line; - dst_line += dst_stride; - mask = mask_line; - mask_line += mask_stride; - w = width; - - while (w--) - { - uint16_t tmp; - uint16_t a; - uint32_t m, d; - uint32_t r; - - a = *mask++; - d = *dst; - - m = MUL_UN8 (sa, a, tmp); - r = ADD_UN8 (m, d, tmp); - - *dst++ = r; - } - } -} - -#ifdef WORDS_BIGENDIAN -#define CREATE_BITMASK(n) (0x80000000 >> (n)) -#define UPDATE_BITMASK(n) ((n) >> 1) -#else -#define CREATE_BITMASK(n) (1 << (n)) -#define UPDATE_BITMASK(n) ((n) << 1) -#endif - -#define TEST_BIT(p, n) \ - (*((p) + ((n) >> 5)) & CREATE_BITMASK ((n) & 31)) -#define SET_BIT(p, n) \ - do { *((p) + ((n) >> 5)) |= CREATE_BITMASK ((n) & 31); } while (0); - -static void -fast_composite_add_1000_1000 (pixman_implementation_t *imp, - pixman_op_t op, - pixman_image_t * src_image, - pixman_image_t * mask_image, - pixman_image_t * dst_image, - int32_t src_x, - int32_t src_y, - int32_t mask_x, - int32_t mask_y, - int32_t dest_x, - int32_t dest_y, - int32_t width, - int32_t height) -{ - uint32_t *dst_line, *dst; - uint32_t *src_line, *src; - int dst_stride, src_stride; - int32_t w; - - PIXMAN_IMAGE_GET_LINE (src_image, 0, src_y, uint32_t, - src_stride, src_line, 1); - PIXMAN_IMAGE_GET_LINE (dst_image, 0, dest_y, uint32_t, - dst_stride, dst_line, 1); - - while (height--) - { - dst = dst_line; - dst_line += dst_stride; - src = src_line; - src_line += src_stride; - w = width; - - while (w--) - { - /* - * TODO: improve performance by processing uint32_t data instead - * of individual bits - */ - if (TEST_BIT (src, src_x + w)) - SET_BIT (dst, dest_x + w); - } - } -} - -static void -fast_composite_over_n_1_8888 (pixman_implementation_t *imp, - pixman_op_t op, - pixman_image_t * src_image, - pixman_image_t * mask_image, - pixman_image_t * dst_image, - int32_t src_x, - int32_t src_y, - int32_t mask_x, - int32_t mask_y, - int32_t dest_x, - int32_t dest_y, - int32_t width, - int32_t height) -{ - uint32_t src, srca; - uint32_t *dst, *dst_line; - uint32_t *mask, *mask_line; - int mask_stride, dst_stride; - uint32_t bitcache, bitmask; - int32_t w; - - if (width <= 0) - return; - - src = _pixman_image_get_solid (src_image, dst_image->bits.format); - srca = src >> 24; - if (src == 0) - return; - - PIXMAN_IMAGE_GET_LINE (dst_image, dest_x, dest_y, uint32_t, - dst_stride, dst_line, 1); - PIXMAN_IMAGE_GET_LINE (mask_image, 0, mask_y, uint32_t, - mask_stride, mask_line, 1); - mask_line += mask_x >> 5; - - if (srca == 0xff) - { - while (height--) - { - dst = dst_line; - dst_line += dst_stride; - mask = mask_line; - mask_line += mask_stride; - w = width; - - bitcache = *mask++; - bitmask = CREATE_BITMASK (mask_x & 31); - - while (w--) - { - if (bitmask == 0) - { - bitcache = *mask++; - bitmask = CREATE_BITMASK (0); - } - if (bitcache & bitmask) - *dst = src; - bitmask = UPDATE_BITMASK (bitmask); - dst++; - } - } - } - else - { - while (height--) - { - dst = dst_line; - dst_line += dst_stride; - mask = mask_line; - mask_line += mask_stride; - w = width; - - bitcache = *mask++; - bitmask = CREATE_BITMASK (mask_x & 31); - - while (w--) - { - if (bitmask == 0) - { - bitcache = *mask++; - bitmask = CREATE_BITMASK (0); - } - if (bitcache & bitmask) - *dst = over (src, *dst); - bitmask = UPDATE_BITMASK (bitmask); - dst++; - } - } - } -} - -static void -fast_composite_over_n_1_0565 (pixman_implementation_t *imp, - pixman_op_t op, - pixman_image_t * src_image, - pixman_image_t * mask_image, - pixman_image_t * dst_image, - int32_t src_x, - int32_t src_y, - int32_t mask_x, - int32_t mask_y, - int32_t dest_x, - int32_t dest_y, - int32_t width, - int32_t height) -{ - uint32_t src, srca; - uint16_t *dst, *dst_line; - uint32_t *mask, *mask_line; - int mask_stride, dst_stride; - uint32_t bitcache, bitmask; - int32_t w; - uint32_t d; - uint16_t src565; - - if (width <= 0) - return; - - src = _pixman_image_get_solid (src_image, dst_image->bits.format); - srca = src >> 24; - if (src == 0) - return; - - PIXMAN_IMAGE_GET_LINE (dst_image, dest_x, dest_y, uint16_t, - dst_stride, dst_line, 1); - PIXMAN_IMAGE_GET_LINE (mask_image, 0, mask_y, uint32_t, - mask_stride, mask_line, 1); - mask_line += mask_x >> 5; - - if (srca == 0xff) - { - src565 = CONVERT_8888_TO_0565 (src); - while (height--) - { - dst = dst_line; - dst_line += dst_stride; - mask = mask_line; - mask_line += mask_stride; - w = width; - - bitcache = *mask++; - bitmask = CREATE_BITMASK (mask_x & 31); - - while (w--) - { - if (bitmask == 0) - { - bitcache = *mask++; - bitmask = CREATE_BITMASK (0); - } - if (bitcache & bitmask) - *dst = src565; - bitmask = UPDATE_BITMASK (bitmask); - dst++; - } - } - } - else - { - while (height--) - { - dst = dst_line; - dst_line += dst_stride; - mask = mask_line; - mask_line += mask_stride; - w = width; - - bitcache = *mask++; - bitmask = CREATE_BITMASK (mask_x & 31); - - while (w--) - { - if (bitmask == 0) - { - bitcache = *mask++; - bitmask = CREATE_BITMASK (0); - } - if (bitcache & bitmask) - { - d = over (src, CONVERT_0565_TO_0888 (*dst)); - *dst = CONVERT_8888_TO_0565 (d); - } - bitmask = UPDATE_BITMASK (bitmask); - dst++; - } - } - } -} - -/* - * Simple bitblt - */ - -static void -fast_composite_solid_fill (pixman_implementation_t *imp, - pixman_op_t op, - pixman_image_t * src_image, - pixman_image_t * mask_image, - pixman_image_t * dst_image, - int32_t src_x, - int32_t src_y, - int32_t mask_x, - int32_t mask_y, - int32_t dest_x, - int32_t dest_y, - int32_t width, - int32_t height) -{ - uint32_t src; - - src = _pixman_image_get_solid (src_image, dst_image->bits.format); - - if (dst_image->bits.format == PIXMAN_a8) - { - src = src >> 24; - } - else if (dst_image->bits.format == PIXMAN_r5g6b5 || - dst_image->bits.format == PIXMAN_b5g6r5) - { - src = CONVERT_8888_TO_0565 (src); - } - - pixman_fill (dst_image->bits.bits, dst_image->bits.rowstride, - PIXMAN_FORMAT_BPP (dst_image->bits.format), - dest_x, dest_y, - width, height, - src); -} - -static void -fast_composite_src_8888_x888 (pixman_implementation_t *imp, - pixman_op_t op, - pixman_image_t * src_image, - pixman_image_t * mask_image, - pixman_image_t * dst_image, - int32_t src_x, - int32_t src_y, - int32_t mask_x, - int32_t mask_y, - int32_t dest_x, - int32_t dest_y, - int32_t width, - int32_t height) -{ - uint32_t *dst; - uint32_t *src; - int dst_stride, src_stride; - uint32_t n_bytes = width * sizeof (uint32_t); - - PIXMAN_IMAGE_GET_LINE (src_image, src_x, src_y, uint32_t, src_stride, src, 1); - PIXMAN_IMAGE_GET_LINE (dst_image, dest_x, dest_y, uint32_t, dst_stride, dst, 1); - - while (height--) - { - memcpy (dst, src, n_bytes); - - dst += dst_stride; - src += src_stride; - } -} - -static force_inline pixman_bool_t -repeat (pixman_repeat_t repeat, int *c, int size) -{ - if (repeat == PIXMAN_REPEAT_NONE) - { - if (*c < 0 || *c >= size) - return FALSE; - } - else if (repeat == PIXMAN_REPEAT_NORMAL) - { - while (*c >= size) - *c -= size; - while (*c < 0) - *c += size; - } - else if (repeat == PIXMAN_REPEAT_PAD) - { - *c = CLIP (*c, 0, size - 1); - } - else /* REFLECT */ - { - *c = MOD (*c, size * 2); - if (*c >= size) - *c = size * 2 - *c - 1; - } - return TRUE; -} - -/* A macroified version of specialized nearest scalers for some - * common 8888 and 565 formats. It supports SRC and OVER ops. - * - * There are two repeat versions, one that handles repeat normal, - * and one without repeat handling that only works if the src region - * used is completely covered by the pre-repeated source samples. - * - * The loops are unrolled to process two pixels per iteration for better - * performance on most CPU architectures (superscalar processors - * can issue several operations simultaneously, other processors can hide - * instructions latencies by pipelining operations). Unrolling more - * does not make much sense because the compiler will start running out - * of spare registers soon. - */ - -#define GET_8888_ALPHA(s) ((s) >> 24) - /* This is not actually used since we don't have an OVER with - 565 source, but it is needed to build. */ -#define GET_0565_ALPHA(s) 0xff - -#define FAST_NEAREST(scale_func_name, SRC_FORMAT, DST_FORMAT, \ - src_type_t, dst_type_t, OP, do_repeat) \ -static void \ -fast_composite_scaled_nearest_ ## scale_func_name ## _ ## OP (pixman_implementation_t *imp, \ - pixman_op_t op, \ - pixman_image_t * src_image, \ - pixman_image_t * mask_image, \ - pixman_image_t * dst_image, \ - int32_t src_x, \ - int32_t src_y, \ - int32_t mask_x, \ - int32_t mask_y, \ - int32_t dst_x, \ - int32_t dst_y, \ - int32_t width, \ - int32_t height) \ -{ \ - dst_type_t *dst_line; \ - src_type_t *src_first_line; \ - uint32_t d; \ - src_type_t s1, s2; \ - uint8_t a1, a2; \ - int w; \ - int x1, x2, y; \ - pixman_fixed_t orig_vx; \ - pixman_fixed_t max_vx, max_vy; \ - pixman_vector_t v; \ - pixman_fixed_t vx, vy; \ - pixman_fixed_t unit_x, unit_y; \ - \ - src_type_t *src; \ - dst_type_t *dst; \ - int src_stride, dst_stride; \ - \ - if (PIXMAN_OP_ ## OP != PIXMAN_OP_SRC && PIXMAN_OP_ ## OP != PIXMAN_OP_OVER) \ - abort(); \ - \ - PIXMAN_IMAGE_GET_LINE (dst_image, dst_x, dst_y, dst_type_t, dst_stride, dst_line, 1); \ - /* pass in 0 instead of src_x and src_y because src_x and src_y need to be \ - * transformed from destination space to source space */ \ - PIXMAN_IMAGE_GET_LINE (src_image, 0, 0, src_type_t, src_stride, src_first_line, 1); \ - \ - /* reference point is the center of the pixel */ \ - v.vector[0] = pixman_int_to_fixed (src_x) + pixman_fixed_1 / 2; \ - v.vector[1] = pixman_int_to_fixed (src_y) + pixman_fixed_1 / 2; \ - v.vector[2] = pixman_fixed_1; \ - \ - if (!pixman_transform_point_3d (src_image->common.transform, &v)) \ - return; \ - \ - unit_x = src_image->common.transform->matrix[0][0]; \ - unit_y = src_image->common.transform->matrix[1][1]; \ - \ - /* Round down to closest integer, ensuring that 0.5 rounds to 0, not 1 */ \ - v.vector[0] -= pixman_fixed_e; \ - v.vector[1] -= pixman_fixed_e; \ - \ - vx = v.vector[0]; \ - vy = v.vector[1]; \ - \ - if (do_repeat) \ - { \ - /* Clamp repeating positions inside the actual samples */ \ - max_vx = src_image->bits.width << 16; \ - max_vy = src_image->bits.height << 16; \ - \ - repeat (PIXMAN_REPEAT_NORMAL, &vx, max_vx); \ - repeat (PIXMAN_REPEAT_NORMAL, &vy, max_vy); \ - } \ - \ - orig_vx = vx; \ - \ - while (--height >= 0) \ - { \ - dst = dst_line; \ - dst_line += dst_stride; \ - \ - y = vy >> 16; \ - vy += unit_y; \ - if (do_repeat) \ - repeat (PIXMAN_REPEAT_NORMAL, &vy, max_vy); \ - \ - src = src_first_line + src_stride * y; \ - \ - w = width; \ - vx = orig_vx; \ - while ((w -= 2) >= 0) \ - { \ - x1 = vx >> 16; \ - vx += unit_x; \ - if (do_repeat) \ - { \ - /* This works because we know that unit_x is positive */ \ - while (vx >= max_vx) \ - vx -= max_vx; \ - } \ - s1 = src[x1]; \ - \ - x2 = vx >> 16; \ - vx += unit_x; \ - if (do_repeat) \ - { \ - /* This works because we know that unit_x is positive */ \ - while (vx >= max_vx) \ - vx -= max_vx; \ - } \ - s2 = src[x2]; \ - \ - if (PIXMAN_OP_ ## OP == PIXMAN_OP_OVER) \ - { \ - a1 = GET_ ## SRC_FORMAT ## _ALPHA(s1); \ - a2 = GET_ ## SRC_FORMAT ## _ALPHA(s2); \ - \ - if (a1 == 0xff) \ - { \ - *dst = CONVERT_ ## SRC_FORMAT ## _TO_ ## DST_FORMAT (s1); \ - } \ - else if (s1) \ - { \ - d = CONVERT_## DST_FORMAT ## _TO_8888 (*dst); \ - a1 ^= 0xff; \ - UN8x4_MUL_UN8_ADD_UN8x4 (d, a1, s1); \ - *dst = CONVERT_8888_TO_ ## DST_FORMAT (d); \ - } \ - dst++; \ - \ - if (a2 == 0xff) \ - { \ - *dst = CONVERT_ ## SRC_FORMAT ## _TO_ ## DST_FORMAT (s2); \ - } \ - else if (s2) \ - { \ - d = CONVERT_## DST_FORMAT ## _TO_8888 (*dst); \ - a2 ^= 0xff; \ - UN8x4_MUL_UN8_ADD_UN8x4 (d, a2, s2); \ - *dst = CONVERT_8888_TO_ ## DST_FORMAT (d); \ - } \ - dst++; \ - } \ - else /* PIXMAN_OP_SRC */ \ - { \ - *dst++ = CONVERT_ ## SRC_FORMAT ## _TO_ ## DST_FORMAT (s1); \ - *dst++ = CONVERT_ ## SRC_FORMAT ## _TO_ ## DST_FORMAT (s2); \ - } \ - } \ - \ - if (w & 1) \ - { \ - x1 = vx >> 16; \ - vx += unit_x; \ - if (do_repeat) \ - { \ - /* This works because we know that unit_x is positive */ \ - while (vx >= max_vx) \ - vx -= max_vx; \ - } \ - s1 = src[x1]; \ - \ - if (PIXMAN_OP_ ## OP == PIXMAN_OP_OVER) \ - { \ - a1 = GET_ ## SRC_FORMAT ## _ALPHA(s1); \ - \ - if (a1 == 0xff) \ - { \ - *dst = CONVERT_ ## SRC_FORMAT ## _TO_ ## DST_FORMAT (s1); \ - } \ - else if (s1) \ - { \ - d = CONVERT_## DST_FORMAT ## _TO_8888 (*dst); \ - a1 ^= 0xff; \ - UN8x4_MUL_UN8_ADD_UN8x4 (d, a1, s1); \ - *dst = CONVERT_8888_TO_ ## DST_FORMAT (d); \ - } \ - dst++; \ - } \ - else /* PIXMAN_OP_SRC */ \ - { \ - *dst++ = CONVERT_ ## SRC_FORMAT ## _TO_ ## DST_FORMAT (s1); \ - } \ - } \ - } \ -} - -FAST_NEAREST(x888_x888_none, 8888, 8888, uint32_t, uint32_t, SRC, /*repeat: */ 0); -FAST_NEAREST(x888_x888_normal, 8888, 8888, uint32_t, uint32_t, SRC, /*repeat: */ 1); -FAST_NEAREST(x888_x888_none, 8888, 8888, uint32_t, uint32_t, OVER, /*repeat: */ 0); -FAST_NEAREST(x888_x888_normal, 8888, 8888, uint32_t, uint32_t, OVER, /*repeat: */ 1); -FAST_NEAREST(x888_565_none, 8888, 0565, uint32_t, uint16_t, SRC, /*repeat: */ 0); -FAST_NEAREST(x888_565_normal, 8888, 0565, uint32_t, uint16_t, SRC, /*repeat: */ 1); -FAST_NEAREST(565_565_none, 0565, 0565, uint16_t, uint16_t, SRC, /*repeat: */ 0); -FAST_NEAREST(565_565_normal, 0565, 0565, uint16_t, uint16_t, SRC, /*repeat: */ 1); -FAST_NEAREST(8888_565_none, 8888, 0565, uint32_t, uint16_t, OVER, /*repeat: */ 0); -FAST_NEAREST(8888_565_normal, 8888, 0565, uint32_t, uint16_t, OVER, /*repeat: */ 1); - -static force_inline uint32_t -fetch_nearest (pixman_repeat_t src_repeat, - pixman_format_code_t format, - uint32_t *src, int x, int src_width) -{ - if (repeat (src_repeat, &x, src_width)) - { - if (format == PIXMAN_x8r8g8b8) - return *(src + x) | 0xff000000; - else - return *(src + x); - } - else - { - return 0; - } -} - -static force_inline void -combine_over (uint32_t s, uint32_t *dst) -{ - if (s) - { - uint8_t ia = 0xff - (s >> 24); - - if (ia) - UN8x4_MUL_UN8_ADD_UN8x4 (*dst, ia, s); - else - *dst = s; - } -} - -static force_inline void -combine_src (uint32_t s, uint32_t *dst) -{ - *dst = s; -} - -static void -fast_composite_scaled_nearest (pixman_implementation_t *imp, - pixman_op_t op, - pixman_image_t * src_image, - pixman_image_t * mask_image, - pixman_image_t * dst_image, - int32_t src_x, - int32_t src_y, - int32_t mask_x, - int32_t mask_y, - int32_t dest_x, - int32_t dest_y, - int32_t width, - int32_t height) -{ - uint32_t *dst_line; - uint32_t *src_line; - int dst_stride, src_stride; - int src_width, src_height; - pixman_repeat_t src_repeat; - pixman_fixed_t unit_x, unit_y; - pixman_format_code_t src_format; - pixman_vector_t v; - pixman_fixed_t vy; - - PIXMAN_IMAGE_GET_LINE (dst_image, dest_x, dest_y, uint32_t, dst_stride, dst_line, 1); - /* pass in 0 instead of src_x and src_y because src_x and src_y need to be - * transformed from destination space to source space - */ - PIXMAN_IMAGE_GET_LINE (src_image, 0, 0, uint32_t, src_stride, src_line, 1); - - /* reference point is the center of the pixel */ - v.vector[0] = pixman_int_to_fixed (src_x) + pixman_fixed_1 / 2; - v.vector[1] = pixman_int_to_fixed (src_y) + pixman_fixed_1 / 2; - v.vector[2] = pixman_fixed_1; - - if (!pixman_transform_point_3d (src_image->common.transform, &v)) - return; - - unit_x = src_image->common.transform->matrix[0][0]; - unit_y = src_image->common.transform->matrix[1][1]; - - /* Round down to closest integer, ensuring that 0.5 rounds to 0, not 1 */ - v.vector[0] -= pixman_fixed_e; - v.vector[1] -= pixman_fixed_e; - - src_height = src_image->bits.height; - src_width = src_image->bits.width; - src_repeat = src_image->common.repeat; - src_format = src_image->bits.format; - - vy = v.vector[1]; - while (height--) - { - pixman_fixed_t vx = v.vector[0]; - int y = pixman_fixed_to_int (vy); - uint32_t *dst = dst_line; - - dst_line += dst_stride; - - /* adjust the y location by a unit vector in the y direction - * this is equivalent to transforming y+1 of the destination point to source space */ - vy += unit_y; - - if (!repeat (src_repeat, &y, src_height)) - { - if (op == PIXMAN_OP_SRC) - memset (dst, 0, sizeof (*dst) * width); - } - else - { - int w = width; - - uint32_t *src = src_line + y * src_stride; - - while (w >= 2) - { - uint32_t s1, s2; - int x1, x2; - - x1 = pixman_fixed_to_int (vx); - vx += unit_x; - - x2 = pixman_fixed_to_int (vx); - vx += unit_x; - - w -= 2; - - s1 = fetch_nearest (src_repeat, src_format, src, x1, src_width); - s2 = fetch_nearest (src_repeat, src_format, src, x2, src_width); - - if (op == PIXMAN_OP_OVER) - { - combine_over (s1, dst++); - combine_over (s2, dst++); - } - else - { - combine_src (s1, dst++); - combine_src (s2, dst++); - } - } - - while (w--) - { - uint32_t s; - int x; - - x = pixman_fixed_to_int (vx); - vx += unit_x; - - s = fetch_nearest (src_repeat, src_format, src, x, src_width); - - if (op == PIXMAN_OP_OVER) - combine_over (s, dst++); - else - combine_src (s, dst++); - } - } - } -} - -static const pixman_fast_path_t c_fast_paths[] = -{ - PIXMAN_STD_FAST_PATH (OVER, solid, a8, r5g6b5, fast_composite_over_n_8_0565), - PIXMAN_STD_FAST_PATH (OVER, solid, a8, b5g6r5, fast_composite_over_n_8_0565), - PIXMAN_STD_FAST_PATH (OVER, solid, a8, r8g8b8, fast_composite_over_n_8_0888), - PIXMAN_STD_FAST_PATH (OVER, solid, a8, b8g8r8, fast_composite_over_n_8_0888), - PIXMAN_STD_FAST_PATH (OVER, solid, a8, a8r8g8b8, fast_composite_over_n_8_8888), - PIXMAN_STD_FAST_PATH (OVER, solid, a8, x8r8g8b8, fast_composite_over_n_8_8888), - PIXMAN_STD_FAST_PATH (OVER, solid, a8, a8b8g8r8, fast_composite_over_n_8_8888), - PIXMAN_STD_FAST_PATH (OVER, solid, a8, x8b8g8r8, fast_composite_over_n_8_8888), - PIXMAN_STD_FAST_PATH (OVER, solid, a1, a8r8g8b8, fast_composite_over_n_1_8888), - PIXMAN_STD_FAST_PATH (OVER, solid, a1, x8r8g8b8, fast_composite_over_n_1_8888), - PIXMAN_STD_FAST_PATH (OVER, solid, a1, a8b8g8r8, fast_composite_over_n_1_8888), - PIXMAN_STD_FAST_PATH (OVER, solid, a1, x8b8g8r8, fast_composite_over_n_1_8888), - PIXMAN_STD_FAST_PATH (OVER, solid, a1, r5g6b5, fast_composite_over_n_1_0565), - PIXMAN_STD_FAST_PATH (OVER, solid, a1, b5g6r5, fast_composite_over_n_1_0565), - PIXMAN_STD_FAST_PATH_CA (OVER, solid, a8r8g8b8, a8r8g8b8, fast_composite_over_n_8888_8888_ca), - PIXMAN_STD_FAST_PATH_CA (OVER, solid, a8r8g8b8, x8r8g8b8, fast_composite_over_n_8888_8888_ca), - PIXMAN_STD_FAST_PATH_CA (OVER, solid, a8r8g8b8, r5g6b5, fast_composite_over_n_8888_0565_ca), - PIXMAN_STD_FAST_PATH_CA (OVER, solid, a8b8g8r8, a8b8g8r8, fast_composite_over_n_8888_8888_ca), - PIXMAN_STD_FAST_PATH_CA (OVER, solid, a8b8g8r8, x8b8g8r8, fast_composite_over_n_8888_8888_ca), - PIXMAN_STD_FAST_PATH_CA (OVER, solid, a8b8g8r8, b5g6r5, fast_composite_over_n_8888_0565_ca), - PIXMAN_STD_FAST_PATH (OVER, x8r8g8b8, a8, x8r8g8b8, fast_composite_over_x888_8_8888), - PIXMAN_STD_FAST_PATH (OVER, x8r8g8b8, a8, a8r8g8b8, fast_composite_over_x888_8_8888), - PIXMAN_STD_FAST_PATH (OVER, x8b8g8r8, a8, x8b8g8r8, fast_composite_over_x888_8_8888), - PIXMAN_STD_FAST_PATH (OVER, x8b8g8r8, a8, a8b8g8r8, fast_composite_over_x888_8_8888), - PIXMAN_STD_FAST_PATH (OVER, a8r8g8b8, null, a8r8g8b8, fast_composite_over_8888_8888), - PIXMAN_STD_FAST_PATH (OVER, a8r8g8b8, null, x8r8g8b8, fast_composite_over_8888_8888), - PIXMAN_STD_FAST_PATH (OVER, a8r8g8b8, null, r5g6b5, fast_composite_over_8888_0565), - PIXMAN_STD_FAST_PATH (OVER, a8b8g8r8, null, a8b8g8r8, fast_composite_over_8888_8888), - PIXMAN_STD_FAST_PATH (OVER, a8b8g8r8, null, x8b8g8r8, fast_composite_over_8888_8888), - PIXMAN_STD_FAST_PATH (OVER, a8b8g8r8, null, b5g6r5, fast_composite_over_8888_0565), - PIXMAN_STD_FAST_PATH (ADD, a8r8g8b8, null, a8r8g8b8, fast_composite_add_8888_8888), - PIXMAN_STD_FAST_PATH (ADD, a8b8g8r8, null, a8b8g8r8, fast_composite_add_8888_8888), - PIXMAN_STD_FAST_PATH (ADD, a8, null, a8, fast_composite_add_8000_8000), - PIXMAN_STD_FAST_PATH (ADD, a1, null, a1, fast_composite_add_1000_1000), - PIXMAN_STD_FAST_PATH_CA (ADD, solid, a8r8g8b8, a8r8g8b8, fast_composite_add_n_8888_8888_ca), - PIXMAN_STD_FAST_PATH (ADD, solid, a8, a8, fast_composite_add_n_8_8), - PIXMAN_STD_FAST_PATH (SRC, solid, null, a8r8g8b8, fast_composite_solid_fill), - PIXMAN_STD_FAST_PATH (SRC, solid, null, x8r8g8b8, fast_composite_solid_fill), - PIXMAN_STD_FAST_PATH (SRC, solid, null, a8b8g8r8, fast_composite_solid_fill), - PIXMAN_STD_FAST_PATH (SRC, solid, null, x8b8g8r8, fast_composite_solid_fill), - PIXMAN_STD_FAST_PATH (SRC, solid, null, a8, fast_composite_solid_fill), - PIXMAN_STD_FAST_PATH (SRC, solid, null, r5g6b5, fast_composite_solid_fill), - PIXMAN_STD_FAST_PATH (SRC, a8r8g8b8, null, x8r8g8b8, fast_composite_src_8888_x888), - PIXMAN_STD_FAST_PATH (SRC, x8r8g8b8, null, x8r8g8b8, fast_composite_src_8888_x888), - PIXMAN_STD_FAST_PATH (SRC, a8b8g8r8, null, x8b8g8r8, fast_composite_src_8888_x888), - PIXMAN_STD_FAST_PATH (SRC, x8b8g8r8, null, x8b8g8r8, fast_composite_src_8888_x888), - PIXMAN_STD_FAST_PATH (SRC, a8r8g8b8, null, r5g6b5, fast_composite_src_x888_0565), - PIXMAN_STD_FAST_PATH (SRC, x8r8g8b8, null, r5g6b5, fast_composite_src_x888_0565), - PIXMAN_STD_FAST_PATH (SRC, a8b8g8r8, null, b5g6r5, fast_composite_src_x888_0565), - PIXMAN_STD_FAST_PATH (SRC, x8b8g8r8, null, b5g6r5, fast_composite_src_x888_0565), - PIXMAN_STD_FAST_PATH (IN, a8, null, a8, fast_composite_in_8_8), - PIXMAN_STD_FAST_PATH (IN, solid, a8, a8, fast_composite_in_n_8_8), - -#define SCALED_NEAREST_FLAGS \ - (FAST_PATH_SCALE_TRANSFORM | \ - FAST_PATH_NO_ALPHA_MAP | \ - FAST_PATH_NEAREST_FILTER | \ - FAST_PATH_NO_ACCESSORS | \ - FAST_PATH_NO_WIDE_FORMAT) - -#define HAS_NORMAL_REPEAT_FLAGS \ - (FAST_PATH_NO_REFLECT_REPEAT | \ - FAST_PATH_NO_PAD_REPEAT | \ - FAST_PATH_NO_NONE_REPEAT) - -#define SIMPLE_NEAREST_FAST_PATH(op,s,d,func) \ - { PIXMAN_OP_ ## op, \ - PIXMAN_ ## s, \ - SCALED_NEAREST_FLAGS | HAS_NORMAL_REPEAT_FLAGS | FAST_PATH_16BIT_SAFE | FAST_PATH_X_UNIT_POSITIVE, \ - PIXMAN_null, 0, \ - PIXMAN_ ## d, FAST_PATH_STD_DEST_FLAGS, \ - fast_composite_scaled_nearest_ ## func ## _normal ## _ ## op, \ - }, \ - { PIXMAN_OP_ ## op, \ - PIXMAN_ ## s, \ - SCALED_NEAREST_FLAGS | FAST_PATH_SAMPLES_COVER_CLIP, \ - PIXMAN_null, 0, \ - PIXMAN_ ## d, FAST_PATH_STD_DEST_FLAGS, \ - fast_composite_scaled_nearest_ ## func ## _none ## _ ## op, \ - } - SIMPLE_NEAREST_FAST_PATH (SRC, x8r8g8b8, x8r8g8b8, x888_x888), - SIMPLE_NEAREST_FAST_PATH (SRC, a8r8g8b8, x8r8g8b8, x888_x888), - SIMPLE_NEAREST_FAST_PATH (SRC, x8b8g8r8, x8b8g8r8, x888_x888), - SIMPLE_NEAREST_FAST_PATH (SRC, a8b8g8r8, x8b8g8r8, x888_x888), - - SIMPLE_NEAREST_FAST_PATH (SRC, a8r8g8b8, a8r8g8b8, x888_x888), - SIMPLE_NEAREST_FAST_PATH (SRC, a8b8g8r8, a8b8g8r8, x888_x888), - - SIMPLE_NEAREST_FAST_PATH (SRC, x8r8g8b8, r5g6b5, x888_565), - SIMPLE_NEAREST_FAST_PATH (SRC, a8r8g8b8, r5g6b5, x888_565), - - SIMPLE_NEAREST_FAST_PATH (SRC, r5g6b5, r5g6b5, 565_565), - - SIMPLE_NEAREST_FAST_PATH (OVER, a8r8g8b8, x8r8g8b8, x888_x888), - SIMPLE_NEAREST_FAST_PATH (OVER, a8b8g8r8, x8b8g8r8, x888_x888), - SIMPLE_NEAREST_FAST_PATH (OVER, a8r8g8b8, a8r8g8b8, x888_x888), - SIMPLE_NEAREST_FAST_PATH (OVER, a8b8g8r8, a8b8g8r8, x888_x888), - - SIMPLE_NEAREST_FAST_PATH (OVER, a8r8g8b8, r5g6b5, 8888_565), - -#define NEAREST_FAST_PATH(op,s,d) \ - { PIXMAN_OP_ ## op, \ - PIXMAN_ ## s, SCALED_NEAREST_FLAGS, \ - PIXMAN_null, 0, \ - PIXMAN_ ## d, FAST_PATH_STD_DEST_FLAGS, \ - fast_composite_scaled_nearest, \ - } - - NEAREST_FAST_PATH (SRC, x8r8g8b8, x8r8g8b8), - NEAREST_FAST_PATH (SRC, a8r8g8b8, x8r8g8b8), - NEAREST_FAST_PATH (SRC, x8b8g8r8, x8b8g8r8), - NEAREST_FAST_PATH (SRC, a8b8g8r8, x8b8g8r8), - - NEAREST_FAST_PATH (SRC, x8r8g8b8, a8r8g8b8), - NEAREST_FAST_PATH (SRC, a8r8g8b8, a8r8g8b8), - NEAREST_FAST_PATH (SRC, x8b8g8r8, a8b8g8r8), - NEAREST_FAST_PATH (SRC, a8b8g8r8, a8b8g8r8), - - NEAREST_FAST_PATH (OVER, x8r8g8b8, x8r8g8b8), - NEAREST_FAST_PATH (OVER, a8r8g8b8, x8r8g8b8), - NEAREST_FAST_PATH (OVER, x8b8g8r8, x8b8g8r8), - NEAREST_FAST_PATH (OVER, a8b8g8r8, x8b8g8r8), - - NEAREST_FAST_PATH (OVER, x8r8g8b8, a8r8g8b8), - NEAREST_FAST_PATH (OVER, a8r8g8b8, a8r8g8b8), - NEAREST_FAST_PATH (OVER, x8b8g8r8, a8b8g8r8), - NEAREST_FAST_PATH (OVER, a8b8g8r8, a8b8g8r8), - - { PIXMAN_OP_NONE }, -}; - -static void -pixman_fill8 (uint32_t *bits, - int stride, - int x, - int y, - int width, - int height, - uint32_t xor) -{ - int byte_stride = stride * (int) sizeof (uint32_t); - uint8_t *dst = (uint8_t *) bits; - uint8_t v = xor & 0xff; - int i; - - dst = dst + y * byte_stride + x; - - while (height--) - { - for (i = 0; i < width; ++i) - dst[i] = v; - - dst += byte_stride; - } -} - -static void -pixman_fill16 (uint32_t *bits, - int stride, - int x, - int y, - int width, - int height, - uint32_t xor) -{ - int short_stride = - (stride * (int)sizeof (uint32_t)) / (int)sizeof (uint16_t); - uint16_t *dst = (uint16_t *)bits; - uint16_t v = xor & 0xffff; - int i; - - dst = dst + y * short_stride + x; - - while (height--) - { - for (i = 0; i < width; ++i) - dst[i] = v; - - dst += short_stride; - } -} - -static void -pixman_fill32 (uint32_t *bits, - int stride, - int x, - int y, - int width, - int height, - uint32_t xor) -{ - int i; - - bits = bits + y * stride + x; - - while (height--) - { - for (i = 0; i < width; ++i) - bits[i] = xor; - - bits += stride; - } -} - -static pixman_bool_t -fast_path_fill (pixman_implementation_t *imp, - uint32_t * bits, - int stride, - int bpp, - int x, - int y, - int width, - int height, - uint32_t xor) -{ - switch (bpp) - { - case 8: - pixman_fill8 (bits, stride, x, y, width, height, xor); - break; - - case 16: - pixman_fill16 (bits, stride, x, y, width, height, xor); - break; - - case 32: - pixman_fill32 (bits, stride, x, y, width, height, xor); - break; - - default: - return _pixman_implementation_fill ( - imp->delegate, bits, stride, bpp, x, y, width, height, xor); - break; - } - - return TRUE; -} - -pixman_implementation_t * -_pixman_implementation_create_fast_path (void) -{ - pixman_implementation_t *general = _pixman_implementation_create_general (); - pixman_implementation_t *imp = _pixman_implementation_create (general, c_fast_paths); - - imp->fill = fast_path_fill; - - return imp; -} +/* -*- Mode: c; c-basic-offset: 4; tab-width: 8; indent-tabs-mode: t; -*- */
+/*
+ * Copyright © 2000 SuSE, Inc.
+ * Copyright © 2007 Red Hat, Inc.
+ *
+ * Permission to use, copy, modify, distribute, and sell this software and its
+ * documentation for any purpose is hereby granted without fee, provided that
+ * the above copyright notice appear in all copies and that both that
+ * copyright notice and this permission notice appear in supporting
+ * documentation, and that the name of SuSE not be used in advertising or
+ * publicity pertaining to distribution of the software without specific,
+ * written prior permission. SuSE makes no representations about the
+ * suitability of this software for any purpose. It is provided "as is"
+ * without express or implied warranty.
+ *
+ * SuSE DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE, INCLUDING ALL
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO EVENT SHALL SuSE
+ * BE LIABLE FOR ANY SPECIAL, INDIRECT OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION
+ * OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN
+ * CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ *
+ * Author: Keith Packard, SuSE, Inc.
+ */
+
+#ifdef HAVE_CONFIG_H
+#include <config.h>
+#endif
+#include <string.h>
+#include <stdlib.h>
+#include "pixman-private.h"
+#include "pixman-combine32.h"
+
+static force_inline uint32_t
+fetch_24 (uint8_t *a)
+{
+ if (((unsigned long)a) & 1)
+ {
+#ifdef WORDS_BIGENDIAN
+ return (*a << 16) | (*(uint16_t *)(a + 1));
+#else
+ return *a | (*(uint16_t *)(a + 1) << 8);
+#endif
+ }
+ else
+ {
+#ifdef WORDS_BIGENDIAN
+ return (*(uint16_t *)a << 8) | *(a + 2);
+#else
+ return *(uint16_t *)a | (*(a + 2) << 16);
+#endif
+ }
+}
+
+static force_inline void
+store_24 (uint8_t *a,
+ uint32_t v)
+{
+ if (((unsigned long)a) & 1)
+ {
+#ifdef WORDS_BIGENDIAN
+ *a = (uint8_t) (v >> 16);
+ *(uint16_t *)(a + 1) = (uint16_t) (v);
+#else
+ *a = (uint8_t) (v);
+ *(uint16_t *)(a + 1) = (uint16_t) (v >> 8);
+#endif
+ }
+ else
+ {
+#ifdef WORDS_BIGENDIAN
+ *(uint16_t *)a = (uint16_t)(v >> 8);
+ *(a + 2) = (uint8_t)v;
+#else
+ *(uint16_t *)a = (uint16_t)v;
+ *(a + 2) = (uint8_t)(v >> 16);
+#endif
+ }
+}
+
+static force_inline uint32_t
+over (uint32_t src,
+ uint32_t dest)
+{
+ uint32_t a = ~src >> 24;
+
+ UN8x4_MUL_UN8_ADD_UN8x4 (dest, a, src);
+
+ return dest;
+}
+
+static uint32_t
+in (uint32_t x,
+ uint8_t y)
+{
+ uint16_t a = y;
+
+ UN8x4_MUL_UN8 (x, a);
+
+ return x;
+}
+
+/*
+ * Naming convention:
+ *
+ * op_src_mask_dest
+ */
+static void
+fast_composite_over_x888_8_8888 (pixman_implementation_t *imp,
+ pixman_op_t op,
+ pixman_image_t * src_image,
+ pixman_image_t * mask_image,
+ pixman_image_t * dst_image,
+ int32_t src_x,
+ int32_t src_y,
+ int32_t mask_x,
+ int32_t mask_y,
+ int32_t dest_x,
+ int32_t dest_y,
+ int32_t width,
+ int32_t height)
+{
+ uint32_t *src, *src_line;
+ uint32_t *dst, *dst_line;
+ uint8_t *mask, *mask_line;
+ int src_stride, mask_stride, dst_stride;
+ uint8_t m;
+ uint32_t s, d;
+ int32_t w;
+
+ PIXMAN_IMAGE_GET_LINE (dst_image, dest_x, dest_y, uint32_t, dst_stride, dst_line, 1);
+ PIXMAN_IMAGE_GET_LINE (mask_image, mask_x, mask_y, uint8_t, mask_stride, mask_line, 1);
+ PIXMAN_IMAGE_GET_LINE (src_image, src_x, src_y, uint32_t, src_stride, src_line, 1);
+
+ while (height--)
+ {
+ src = src_line;
+ src_line += src_stride;
+ dst = dst_line;
+ dst_line += dst_stride;
+ mask = mask_line;
+ mask_line += mask_stride;
+
+ w = width;
+ while (w--)
+ {
+ m = *mask++;
+ if (m)
+ {
+ s = *src | 0xff000000;
+
+ if (m == 0xff)
+ {
+ *dst = s;
+ }
+ else
+ {
+ d = in (s, m);
+ *dst = over (d, *dst);
+ }
+ }
+ src++;
+ dst++;
+ }
+ }
+}
+
+static void
+fast_composite_in_n_8_8 (pixman_implementation_t *imp,
+ pixman_op_t op,
+ pixman_image_t * src_image,
+ pixman_image_t * mask_image,
+ pixman_image_t * dest_image,
+ int32_t src_x,
+ int32_t src_y,
+ int32_t mask_x,
+ int32_t mask_y,
+ int32_t dest_x,
+ int32_t dest_y,
+ int32_t width,
+ int32_t height)
+{
+ uint32_t src, srca;
+ uint8_t *dst_line, *dst;
+ uint8_t *mask_line, *mask, m;
+ int dst_stride, mask_stride;
+ int32_t w;
+ uint16_t t;
+
+ src = _pixman_image_get_solid (src_image, dest_image->bits.format);
+
+ srca = src >> 24;
+
+ PIXMAN_IMAGE_GET_LINE (dest_image, dest_x, dest_y, uint8_t, dst_stride, dst_line, 1);
+ PIXMAN_IMAGE_GET_LINE (mask_image, mask_x, mask_y, uint8_t, mask_stride, mask_line, 1);
+
+ if (srca == 0xff)
+ {
+ while (height--)
+ {
+ dst = dst_line;
+ dst_line += dst_stride;
+ mask = mask_line;
+ mask_line += mask_stride;
+ w = width;
+
+ while (w--)
+ {
+ m = *mask++;
+
+ if (m == 0)
+ *dst = 0;
+ else if (m != 0xff)
+ *dst = MUL_UN8 (m, *dst, t);
+
+ dst++;
+ }
+ }
+ }
+ else
+ {
+ while (height--)
+ {
+ dst = dst_line;
+ dst_line += dst_stride;
+ mask = mask_line;
+ mask_line += mask_stride;
+ w = width;
+
+ while (w--)
+ {
+ m = *mask++;
+ m = MUL_UN8 (m, srca, t);
+
+ if (m == 0)
+ *dst = 0;
+ else if (m != 0xff)
+ *dst = MUL_UN8 (m, *dst, t);
+
+ dst++;
+ }
+ }
+ }
+}
+
+static void
+fast_composite_in_8_8 (pixman_implementation_t *imp,
+ pixman_op_t op,
+ pixman_image_t * src_image,
+ pixman_image_t * mask_image,
+ pixman_image_t * dest_image,
+ int32_t src_x,
+ int32_t src_y,
+ int32_t mask_x,
+ int32_t mask_y,
+ int32_t dest_x,
+ int32_t dest_y,
+ int32_t width,
+ int32_t height)
+{
+ uint8_t *dst_line, *dst;
+ uint8_t *src_line, *src;
+ int dst_stride, src_stride;
+ int32_t w;
+ uint8_t s;
+ uint16_t t;
+
+ PIXMAN_IMAGE_GET_LINE (src_image, src_x, src_y, uint8_t, src_stride, src_line, 1);
+ PIXMAN_IMAGE_GET_LINE (dest_image, dest_x, dest_y, uint8_t, dst_stride, dst_line, 1);
+
+ while (height--)
+ {
+ dst = dst_line;
+ dst_line += dst_stride;
+ src = src_line;
+ src_line += src_stride;
+ w = width;
+
+ while (w--)
+ {
+ s = *src++;
+
+ if (s == 0)
+ *dst = 0;
+ else if (s != 0xff)
+ *dst = MUL_UN8 (s, *dst, t);
+
+ dst++;
+ }
+ }
+}
+
+static void
+fast_composite_over_n_8_8888 (pixman_implementation_t *imp,
+ pixman_op_t op,
+ pixman_image_t * src_image,
+ pixman_image_t * mask_image,
+ pixman_image_t * dst_image,
+ int32_t src_x,
+ int32_t src_y,
+ int32_t mask_x,
+ int32_t mask_y,
+ int32_t dest_x,
+ int32_t dest_y,
+ int32_t width,
+ int32_t height)
+{
+ uint32_t src, srca;
+ uint32_t *dst_line, *dst, d;
+ uint8_t *mask_line, *mask, m;
+ int dst_stride, mask_stride;
+ int32_t w;
+
+ src = _pixman_image_get_solid (src_image, dst_image->bits.format);
+
+ srca = src >> 24;
+ if (src == 0)
+ return;
+
+ PIXMAN_IMAGE_GET_LINE (dst_image, dest_x, dest_y, uint32_t, dst_stride, dst_line, 1);
+ PIXMAN_IMAGE_GET_LINE (mask_image, mask_x, mask_y, uint8_t, mask_stride, mask_line, 1);
+
+ while (height--)
+ {
+ dst = dst_line;
+ dst_line += dst_stride;
+ mask = mask_line;
+ mask_line += mask_stride;
+ w = width;
+
+ while (w--)
+ {
+ m = *mask++;
+ if (m == 0xff)
+ {
+ if (srca == 0xff)
+ *dst = src;
+ else
+ *dst = over (src, *dst);
+ }
+ else if (m)
+ {
+ d = in (src, m);
+ *dst = over (d, *dst);
+ }
+ dst++;
+ }
+ }
+}
+
+static void
+fast_composite_add_n_8888_8888_ca (pixman_implementation_t *imp,
+ pixman_op_t op,
+ pixman_image_t * src_image,
+ pixman_image_t * mask_image,
+ pixman_image_t * dst_image,
+ int32_t src_x,
+ int32_t src_y,
+ int32_t mask_x,
+ int32_t mask_y,
+ int32_t dest_x,
+ int32_t dest_y,
+ int32_t width,
+ int32_t height)
+{
+ uint32_t src, srca, s;
+ uint32_t *dst_line, *dst, d;
+ uint32_t *mask_line, *mask, ma;
+ int dst_stride, mask_stride;
+ int32_t w;
+
+ src = _pixman_image_get_solid (src_image, dst_image->bits.format);
+
+ srca = src >> 24;
+ if (src == 0)
+ return;
+
+ PIXMAN_IMAGE_GET_LINE (dst_image, dest_x, dest_y, uint32_t, dst_stride, dst_line, 1);
+ PIXMAN_IMAGE_GET_LINE (mask_image, mask_x, mask_y, uint32_t, mask_stride, mask_line, 1);
+
+ while (height--)
+ {
+ dst = dst_line;
+ dst_line += dst_stride;
+ mask = mask_line;
+ mask_line += mask_stride;
+ w = width;
+
+ while (w--)
+ {
+ ma = *mask++;
+
+ if (ma)
+ {
+ d = *dst;
+ s = src;
+
+ UN8x4_MUL_UN8x4_ADD_UN8x4 (s, ma, d);
+
+ *dst = s;
+ }
+
+ dst++;
+ }
+ }
+}
+
+static void
+fast_composite_over_n_8888_8888_ca (pixman_implementation_t *imp,
+ pixman_op_t op,
+ pixman_image_t * src_image,
+ pixman_image_t * mask_image,
+ pixman_image_t * dst_image,
+ int32_t src_x,
+ int32_t src_y,
+ int32_t mask_x,
+ int32_t mask_y,
+ int32_t dest_x,
+ int32_t dest_y,
+ int32_t width,
+ int32_t height)
+{
+ uint32_t src, srca, s;
+ uint32_t *dst_line, *dst, d;
+ uint32_t *mask_line, *mask, ma;
+ int dst_stride, mask_stride;
+ int32_t w;
+
+ src = _pixman_image_get_solid (src_image, dst_image->bits.format);
+
+ srca = src >> 24;
+ if (src == 0)
+ return;
+
+ PIXMAN_IMAGE_GET_LINE (dst_image, dest_x, dest_y, uint32_t, dst_stride, dst_line, 1);
+ PIXMAN_IMAGE_GET_LINE (mask_image, mask_x, mask_y, uint32_t, mask_stride, mask_line, 1);
+
+ while (height--)
+ {
+ dst = dst_line;
+ dst_line += dst_stride;
+ mask = mask_line;
+ mask_line += mask_stride;
+ w = width;
+
+ while (w--)
+ {
+ ma = *mask++;
+ if (ma == 0xffffffff)
+ {
+ if (srca == 0xff)
+ *dst = src;
+ else
+ *dst = over (src, *dst);
+ }
+ else if (ma)
+ {
+ d = *dst;
+ s = src;
+
+ UN8x4_MUL_UN8x4 (s, ma);
+ UN8x4_MUL_UN8 (ma, srca);
+ ma = ~ma;
+ UN8x4_MUL_UN8x4_ADD_UN8x4 (d, ma, s);
+
+ *dst = d;
+ }
+
+ dst++;
+ }
+ }
+}
+
+static void
+fast_composite_over_n_8_0888 (pixman_implementation_t *imp,
+ pixman_op_t op,
+ pixman_image_t * src_image,
+ pixman_image_t * mask_image,
+ pixman_image_t * dst_image,
+ int32_t src_x,
+ int32_t src_y,
+ int32_t mask_x,
+ int32_t mask_y,
+ int32_t dest_x,
+ int32_t dest_y,
+ int32_t width,
+ int32_t height)
+{
+ uint32_t src, srca;
+ uint8_t *dst_line, *dst;
+ uint32_t d;
+ uint8_t *mask_line, *mask, m;
+ int dst_stride, mask_stride;
+ int32_t w;
+
+ src = _pixman_image_get_solid (src_image, dst_image->bits.format);
+
+ srca = src >> 24;
+ if (src == 0)
+ return;
+
+ PIXMAN_IMAGE_GET_LINE (dst_image, dest_x, dest_y, uint8_t, dst_stride, dst_line, 3);
+ PIXMAN_IMAGE_GET_LINE (mask_image, mask_x, mask_y, uint8_t, mask_stride, mask_line, 1);
+
+ while (height--)
+ {
+ dst = dst_line;
+ dst_line += dst_stride;
+ mask = mask_line;
+ mask_line += mask_stride;
+ w = width;
+
+ while (w--)
+ {
+ m = *mask++;
+ if (m == 0xff)
+ {
+ if (srca == 0xff)
+ {
+ d = src;
+ }
+ else
+ {
+ d = fetch_24 (dst);
+ d = over (src, d);
+ }
+ store_24 (dst, d);
+ }
+ else if (m)
+ {
+ d = over (in (src, m), fetch_24 (dst));
+ store_24 (dst, d);
+ }
+ dst += 3;
+ }
+ }
+}
+
+static void
+fast_composite_over_n_8_0565 (pixman_implementation_t *imp,
+ pixman_op_t op,
+ pixman_image_t * src_image,
+ pixman_image_t * mask_image,
+ pixman_image_t * dst_image,
+ int32_t src_x,
+ int32_t src_y,
+ int32_t mask_x,
+ int32_t mask_y,
+ int32_t dest_x,
+ int32_t dest_y,
+ int32_t width,
+ int32_t height)
+{
+ uint32_t src, srca;
+ uint16_t *dst_line, *dst;
+ uint32_t d;
+ uint8_t *mask_line, *mask, m;
+ int dst_stride, mask_stride;
+ int32_t w;
+
+ src = _pixman_image_get_solid (src_image, dst_image->bits.format);
+
+ srca = src >> 24;
+ if (src == 0)
+ return;
+
+ PIXMAN_IMAGE_GET_LINE (dst_image, dest_x, dest_y, uint16_t, dst_stride, dst_line, 1);
+ PIXMAN_IMAGE_GET_LINE (mask_image, mask_x, mask_y, uint8_t, mask_stride, mask_line, 1);
+
+ while (height--)
+ {
+ dst = dst_line;
+ dst_line += dst_stride;
+ mask = mask_line;
+ mask_line += mask_stride;
+ w = width;
+
+ while (w--)
+ {
+ m = *mask++;
+ if (m == 0xff)
+ {
+ if (srca == 0xff)
+ {
+ d = src;
+ }
+ else
+ {
+ d = *dst;
+ d = over (src, CONVERT_0565_TO_0888 (d));
+ }
+ *dst = CONVERT_8888_TO_0565 (d);
+ }
+ else if (m)
+ {
+ d = *dst;
+ d = over (in (src, m), CONVERT_0565_TO_0888 (d));
+ *dst = CONVERT_8888_TO_0565 (d);
+ }
+ dst++;
+ }
+ }
+}
+
+static void
+fast_composite_over_n_8888_0565_ca (pixman_implementation_t *imp,
+ pixman_op_t op,
+ pixman_image_t * src_image,
+ pixman_image_t * mask_image,
+ pixman_image_t * dst_image,
+ int32_t src_x,
+ int32_t src_y,
+ int32_t mask_x,
+ int32_t mask_y,
+ int32_t dest_x,
+ int32_t dest_y,
+ int32_t width,
+ int32_t height)
+{
+ uint32_t src, srca, s;
+ uint16_t src16;
+ uint16_t *dst_line, *dst;
+ uint32_t d;
+ uint32_t *mask_line, *mask, ma;
+ int dst_stride, mask_stride;
+ int32_t w;
+
+ src = _pixman_image_get_solid (src_image, dst_image->bits.format);
+
+ srca = src >> 24;
+ if (src == 0)
+ return;
+
+ src16 = CONVERT_8888_TO_0565 (src);
+
+ PIXMAN_IMAGE_GET_LINE (dst_image, dest_x, dest_y, uint16_t, dst_stride, dst_line, 1);
+ PIXMAN_IMAGE_GET_LINE (mask_image, mask_x, mask_y, uint32_t, mask_stride, mask_line, 1);
+
+ while (height--)
+ {
+ dst = dst_line;
+ dst_line += dst_stride;
+ mask = mask_line;
+ mask_line += mask_stride;
+ w = width;
+
+ while (w--)
+ {
+ ma = *mask++;
+ if (ma == 0xffffffff)
+ {
+ if (srca == 0xff)
+ {
+ *dst = src16;
+ }
+ else
+ {
+ d = *dst;
+ d = over (src, CONVERT_0565_TO_0888 (d));
+ *dst = CONVERT_8888_TO_0565 (d);
+ }
+ }
+ else if (ma)
+ {
+ d = *dst;
+ d = CONVERT_0565_TO_0888 (d);
+
+ s = src;
+
+ UN8x4_MUL_UN8x4 (s, ma);
+ UN8x4_MUL_UN8 (ma, srca);
+ ma = ~ma;
+ UN8x4_MUL_UN8x4_ADD_UN8x4 (d, ma, s);
+
+ *dst = CONVERT_8888_TO_0565 (d);
+ }
+ dst++;
+ }
+ }
+}
+
+static void
+fast_composite_over_8888_8888 (pixman_implementation_t *imp,
+ pixman_op_t op,
+ pixman_image_t * src_image,
+ pixman_image_t * mask_image,
+ pixman_image_t * dst_image,
+ int32_t src_x,
+ int32_t src_y,
+ int32_t mask_x,
+ int32_t mask_y,
+ int32_t dest_x,
+ int32_t dest_y,
+ int32_t width,
+ int32_t height)
+{
+ uint32_t *dst_line, *dst;
+ uint32_t *src_line, *src, s;
+ int dst_stride, src_stride;
+ uint8_t a;
+ int32_t w;
+
+ PIXMAN_IMAGE_GET_LINE (dst_image, dest_x, dest_y, uint32_t, dst_stride, dst_line, 1);
+ PIXMAN_IMAGE_GET_LINE (src_image, src_x, src_y, uint32_t, src_stride, src_line, 1);
+
+ while (height--)
+ {
+ dst = dst_line;
+ dst_line += dst_stride;
+ src = src_line;
+ src_line += src_stride;
+ w = width;
+
+ while (w--)
+ {
+ s = *src++;
+ a = s >> 24;
+ if (a == 0xff)
+ *dst = s;
+ else if (s)
+ *dst = over (s, *dst);
+ dst++;
+ }
+ }
+}
+
+static void
+fast_composite_src_x888_8888 (pixman_implementation_t *imp,
+ pixman_op_t op,
+ pixman_image_t * src_image,
+ pixman_image_t * mask_image,
+ pixman_image_t * dst_image,
+ int32_t src_x,
+ int32_t src_y,
+ int32_t mask_x,
+ int32_t mask_y,
+ int32_t dest_x,
+ int32_t dest_y,
+ int32_t width,
+ int32_t height)
+{
+ uint32_t *dst_line, *dst;
+ uint32_t *src_line, *src;
+ int dst_stride, src_stride;
+ int32_t w;
+
+ PIXMAN_IMAGE_GET_LINE (dst_image, dest_x, dest_y, uint32_t, dst_stride, dst_line, 1);
+ PIXMAN_IMAGE_GET_LINE (src_image, src_x, src_y, uint32_t, src_stride, src_line, 1);
+
+ while (height--)
+ {
+ dst = dst_line;
+ dst_line += dst_stride;
+ src = src_line;
+ src_line += src_stride;
+ w = width;
+
+ while (w--)
+ *dst++ = (*src++) | 0xff000000;
+ }
+}
+
+#if 0
+static void
+fast_composite_over_8888_0888 (pixman_implementation_t *imp,
+ pixman_op_t op,
+ pixman_image_t * src_image,
+ pixman_image_t * mask_image,
+ pixman_image_t * dst_image,
+ int32_t src_x,
+ int32_t src_y,
+ int32_t mask_x,
+ int32_t mask_y,
+ int32_t dest_x,
+ int32_t dest_y,
+ int32_t width,
+ int32_t height)
+{
+ uint8_t *dst_line, *dst;
+ uint32_t d;
+ uint32_t *src_line, *src, s;
+ uint8_t a;
+ int dst_stride, src_stride;
+ int32_t w;
+
+ PIXMAN_IMAGE_GET_LINE (dst_image, dest_x, dest_y, uint8_t, dst_stride, dst_line, 3);
+ PIXMAN_IMAGE_GET_LINE (src_image, src_x, src_y, uint32_t, src_stride, src_line, 1);
+
+ while (height--)
+ {
+ dst = dst_line;
+ dst_line += dst_stride;
+ src = src_line;
+ src_line += src_stride;
+ w = width;
+
+ while (w--)
+ {
+ s = *src++;
+ a = s >> 24;
+ if (a)
+ {
+ if (a == 0xff)
+ d = s;
+ else
+ d = over (s, fetch_24 (dst));
+
+ store_24 (dst, d);
+ }
+ dst += 3;
+ }
+ }
+}
+#endif
+
+static void
+fast_composite_over_8888_0565 (pixman_implementation_t *imp,
+ pixman_op_t op,
+ pixman_image_t * src_image,
+ pixman_image_t * mask_image,
+ pixman_image_t * dst_image,
+ int32_t src_x,
+ int32_t src_y,
+ int32_t mask_x,
+ int32_t mask_y,
+ int32_t dest_x,
+ int32_t dest_y,
+ int32_t width,
+ int32_t height)
+{
+ uint16_t *dst_line, *dst;
+ uint32_t d;
+ uint32_t *src_line, *src, s;
+ uint8_t a;
+ int dst_stride, src_stride;
+ int32_t w;
+
+ PIXMAN_IMAGE_GET_LINE (src_image, src_x, src_y, uint32_t, src_stride, src_line, 1);
+ PIXMAN_IMAGE_GET_LINE (dst_image, dest_x, dest_y, uint16_t, dst_stride, dst_line, 1);
+
+ while (height--)
+ {
+ dst = dst_line;
+ dst_line += dst_stride;
+ src = src_line;
+ src_line += src_stride;
+ w = width;
+
+ while (w--)
+ {
+ s = *src++;
+ a = s >> 24;
+ if (s)
+ {
+ if (a == 0xff)
+ {
+ d = s;
+ }
+ else
+ {
+ d = *dst;
+ d = over (s, CONVERT_0565_TO_0888 (d));
+ }
+ *dst = CONVERT_8888_TO_0565 (d);
+ }
+ dst++;
+ }
+ }
+}
+
+static void
+fast_composite_src_x888_0565 (pixman_implementation_t *imp,
+ pixman_op_t op,
+ pixman_image_t * src_image,
+ pixman_image_t * mask_image,
+ pixman_image_t * dst_image,
+ int32_t src_x,
+ int32_t src_y,
+ int32_t mask_x,
+ int32_t mask_y,
+ int32_t dest_x,
+ int32_t dest_y,
+ int32_t width,
+ int32_t height)
+{
+ uint16_t *dst_line, *dst;
+ uint32_t *src_line, *src, s;
+ int dst_stride, src_stride;
+ int32_t w;
+
+ PIXMAN_IMAGE_GET_LINE (src_image, src_x, src_y, uint32_t, src_stride, src_line, 1);
+ PIXMAN_IMAGE_GET_LINE (dst_image, dest_x, dest_y, uint16_t, dst_stride, dst_line, 1);
+
+ while (height--)
+ {
+ dst = dst_line;
+ dst_line += dst_stride;
+ src = src_line;
+ src_line += src_stride;
+ w = width;
+
+ while (w--)
+ {
+ s = *src++;
+ *dst = CONVERT_8888_TO_0565 (s);
+ dst++;
+ }
+ }
+}
+
+static void
+fast_composite_add_8000_8000 (pixman_implementation_t *imp,
+ pixman_op_t op,
+ pixman_image_t * src_image,
+ pixman_image_t * mask_image,
+ pixman_image_t * dst_image,
+ int32_t src_x,
+ int32_t src_y,
+ int32_t mask_x,
+ int32_t mask_y,
+ int32_t dest_x,
+ int32_t dest_y,
+ int32_t width,
+ int32_t height)
+{
+ uint8_t *dst_line, *dst;
+ uint8_t *src_line, *src;
+ int dst_stride, src_stride;
+ int32_t w;
+ uint8_t s, d;
+ uint16_t t;
+
+ PIXMAN_IMAGE_GET_LINE (src_image, src_x, src_y, uint8_t, src_stride, src_line, 1);
+ PIXMAN_IMAGE_GET_LINE (dst_image, dest_x, dest_y, uint8_t, dst_stride, dst_line, 1);
+
+ while (height--)
+ {
+ dst = dst_line;
+ dst_line += dst_stride;
+ src = src_line;
+ src_line += src_stride;
+ w = width;
+
+ while (w--)
+ {
+ s = *src++;
+ if (s)
+ {
+ if (s != 0xff)
+ {
+ d = *dst;
+ t = d + s;
+ s = t | (0 - (t >> 8));
+ }
+ *dst = s;
+ }
+ dst++;
+ }
+ }
+}
+
+static void
+fast_composite_add_8888_8888 (pixman_implementation_t *imp,
+ pixman_op_t op,
+ pixman_image_t * src_image,
+ pixman_image_t * mask_image,
+ pixman_image_t * dst_image,
+ int32_t src_x,
+ int32_t src_y,
+ int32_t mask_x,
+ int32_t mask_y,
+ int32_t dest_x,
+ int32_t dest_y,
+ int32_t width,
+ int32_t height)
+{
+ uint32_t *dst_line, *dst;
+ uint32_t *src_line, *src;
+ int dst_stride, src_stride;
+ int32_t w;
+ uint32_t s, d;
+
+ PIXMAN_IMAGE_GET_LINE (src_image, src_x, src_y, uint32_t, src_stride, src_line, 1);
+ PIXMAN_IMAGE_GET_LINE (dst_image, dest_x, dest_y, uint32_t, dst_stride, dst_line, 1);
+
+ while (height--)
+ {
+ dst = dst_line;
+ dst_line += dst_stride;
+ src = src_line;
+ src_line += src_stride;
+ w = width;
+
+ while (w--)
+ {
+ s = *src++;
+ if (s)
+ {
+ if (s != 0xffffffff)
+ {
+ d = *dst;
+ if (d)
+ UN8x4_ADD_UN8x4 (s, d);
+ }
+ *dst = s;
+ }
+ dst++;
+ }
+ }
+}
+
+static void
+fast_composite_add_n_8_8 (pixman_implementation_t *imp,
+ pixman_op_t op,
+ pixman_image_t * src_image,
+ pixman_image_t * mask_image,
+ pixman_image_t * dst_image,
+ int32_t src_x,
+ int32_t src_y,
+ int32_t mask_x,
+ int32_t mask_y,
+ int32_t dest_x,
+ int32_t dest_y,
+ int32_t width,
+ int32_t height)
+{
+ uint8_t *dst_line, *dst;
+ uint8_t *mask_line, *mask;
+ int dst_stride, mask_stride;
+ int32_t w;
+ uint32_t src;
+ uint8_t sa;
+
+ PIXMAN_IMAGE_GET_LINE (dst_image, dest_x, dest_y, uint8_t, dst_stride, dst_line, 1);
+ PIXMAN_IMAGE_GET_LINE (mask_image, mask_x, mask_y, uint8_t, mask_stride, mask_line, 1);
+ src = _pixman_image_get_solid (src_image, dst_image->bits.format);
+ sa = (src >> 24);
+
+ while (height--)
+ {
+ dst = dst_line;
+ dst_line += dst_stride;
+ mask = mask_line;
+ mask_line += mask_stride;
+ w = width;
+
+ while (w--)
+ {
+ uint16_t tmp;
+ uint16_t a;
+ uint32_t m, d;
+ uint32_t r;
+
+ a = *mask++;
+ d = *dst;
+
+ m = MUL_UN8 (sa, a, tmp);
+ r = ADD_UN8 (m, d, tmp);
+
+ *dst++ = r;
+ }
+ }
+}
+
+#ifdef WORDS_BIGENDIAN
+#define CREATE_BITMASK(n) (0x80000000 >> (n))
+#define UPDATE_BITMASK(n) ((n) >> 1)
+#else
+#define CREATE_BITMASK(n) (1 << (n))
+#define UPDATE_BITMASK(n) ((n) << 1)
+#endif
+
+#define TEST_BIT(p, n) \
+ (*((p) + ((n) >> 5)) & CREATE_BITMASK ((n) & 31))
+#define SET_BIT(p, n) \
+ do { *((p) + ((n) >> 5)) |= CREATE_BITMASK ((n) & 31); } while (0);
+
+static void
+fast_composite_add_1000_1000 (pixman_implementation_t *imp,
+ pixman_op_t op,
+ pixman_image_t * src_image,
+ pixman_image_t * mask_image,
+ pixman_image_t * dst_image,
+ int32_t src_x,
+ int32_t src_y,
+ int32_t mask_x,
+ int32_t mask_y,
+ int32_t dest_x,
+ int32_t dest_y,
+ int32_t width,
+ int32_t height)
+{
+ uint32_t *dst_line, *dst;
+ uint32_t *src_line, *src;
+ int dst_stride, src_stride;
+ int32_t w;
+
+ PIXMAN_IMAGE_GET_LINE (src_image, 0, src_y, uint32_t,
+ src_stride, src_line, 1);
+ PIXMAN_IMAGE_GET_LINE (dst_image, 0, dest_y, uint32_t,
+ dst_stride, dst_line, 1);
+
+ while (height--)
+ {
+ dst = dst_line;
+ dst_line += dst_stride;
+ src = src_line;
+ src_line += src_stride;
+ w = width;
+
+ while (w--)
+ {
+ /*
+ * TODO: improve performance by processing uint32_t data instead
+ * of individual bits
+ */
+ if (TEST_BIT (src, src_x + w))
+ SET_BIT (dst, dest_x + w);
+ }
+ }
+}
+
+static void
+fast_composite_over_n_1_8888 (pixman_implementation_t *imp,
+ pixman_op_t op,
+ pixman_image_t * src_image,
+ pixman_image_t * mask_image,
+ pixman_image_t * dst_image,
+ int32_t src_x,
+ int32_t src_y,
+ int32_t mask_x,
+ int32_t mask_y,
+ int32_t dest_x,
+ int32_t dest_y,
+ int32_t width,
+ int32_t height)
+{
+ uint32_t src, srca;
+ uint32_t *dst, *dst_line;
+ uint32_t *mask, *mask_line;
+ int mask_stride, dst_stride;
+ uint32_t bitcache, bitmask;
+ int32_t w;
+
+ if (width <= 0)
+ return;
+
+ src = _pixman_image_get_solid (src_image, dst_image->bits.format);
+ srca = src >> 24;
+ if (src == 0)
+ return;
+
+ PIXMAN_IMAGE_GET_LINE (dst_image, dest_x, dest_y, uint32_t,
+ dst_stride, dst_line, 1);
+ PIXMAN_IMAGE_GET_LINE (mask_image, 0, mask_y, uint32_t,
+ mask_stride, mask_line, 1);
+ mask_line += mask_x >> 5;
+
+ if (srca == 0xff)
+ {
+ while (height--)
+ {
+ dst = dst_line;
+ dst_line += dst_stride;
+ mask = mask_line;
+ mask_line += mask_stride;
+ w = width;
+
+ bitcache = *mask++;
+ bitmask = CREATE_BITMASK (mask_x & 31);
+
+ while (w--)
+ {
+ if (bitmask == 0)
+ {
+ bitcache = *mask++;
+ bitmask = CREATE_BITMASK (0);
+ }
+ if (bitcache & bitmask)
+ *dst = src;
+ bitmask = UPDATE_BITMASK (bitmask);
+ dst++;
+ }
+ }
+ }
+ else
+ {
+ while (height--)
+ {
+ dst = dst_line;
+ dst_line += dst_stride;
+ mask = mask_line;
+ mask_line += mask_stride;
+ w = width;
+
+ bitcache = *mask++;
+ bitmask = CREATE_BITMASK (mask_x & 31);
+
+ while (w--)
+ {
+ if (bitmask == 0)
+ {
+ bitcache = *mask++;
+ bitmask = CREATE_BITMASK (0);
+ }
+ if (bitcache & bitmask)
+ *dst = over (src, *dst);
+ bitmask = UPDATE_BITMASK (bitmask);
+ dst++;
+ }
+ }
+ }
+}
+
+static void
+fast_composite_over_n_1_0565 (pixman_implementation_t *imp,
+ pixman_op_t op,
+ pixman_image_t * src_image,
+ pixman_image_t * mask_image,
+ pixman_image_t * dst_image,
+ int32_t src_x,
+ int32_t src_y,
+ int32_t mask_x,
+ int32_t mask_y,
+ int32_t dest_x,
+ int32_t dest_y,
+ int32_t width,
+ int32_t height)
+{
+ uint32_t src, srca;
+ uint16_t *dst, *dst_line;
+ uint32_t *mask, *mask_line;
+ int mask_stride, dst_stride;
+ uint32_t bitcache, bitmask;
+ int32_t w;
+ uint32_t d;
+ uint16_t src565;
+
+ if (width <= 0)
+ return;
+
+ src = _pixman_image_get_solid (src_image, dst_image->bits.format);
+ srca = src >> 24;
+ if (src == 0)
+ return;
+
+ PIXMAN_IMAGE_GET_LINE (dst_image, dest_x, dest_y, uint16_t,
+ dst_stride, dst_line, 1);
+ PIXMAN_IMAGE_GET_LINE (mask_image, 0, mask_y, uint32_t,
+ mask_stride, mask_line, 1);
+ mask_line += mask_x >> 5;
+
+ if (srca == 0xff)
+ {
+ src565 = CONVERT_8888_TO_0565 (src);
+ while (height--)
+ {
+ dst = dst_line;
+ dst_line += dst_stride;
+ mask = mask_line;
+ mask_line += mask_stride;
+ w = width;
+
+ bitcache = *mask++;
+ bitmask = CREATE_BITMASK (mask_x & 31);
+
+ while (w--)
+ {
+ if (bitmask == 0)
+ {
+ bitcache = *mask++;
+ bitmask = CREATE_BITMASK (0);
+ }
+ if (bitcache & bitmask)
+ *dst = src565;
+ bitmask = UPDATE_BITMASK (bitmask);
+ dst++;
+ }
+ }
+ }
+ else
+ {
+ while (height--)
+ {
+ dst = dst_line;
+ dst_line += dst_stride;
+ mask = mask_line;
+ mask_line += mask_stride;
+ w = width;
+
+ bitcache = *mask++;
+ bitmask = CREATE_BITMASK (mask_x & 31);
+
+ while (w--)
+ {
+ if (bitmask == 0)
+ {
+ bitcache = *mask++;
+ bitmask = CREATE_BITMASK (0);
+ }
+ if (bitcache & bitmask)
+ {
+ d = over (src, CONVERT_0565_TO_0888 (*dst));
+ *dst = CONVERT_8888_TO_0565 (d);
+ }
+ bitmask = UPDATE_BITMASK (bitmask);
+ dst++;
+ }
+ }
+ }
+}
+
+/*
+ * Simple bitblt
+ */
+
+static void
+fast_composite_solid_fill (pixman_implementation_t *imp,
+ pixman_op_t op,
+ pixman_image_t * src_image,
+ pixman_image_t * mask_image,
+ pixman_image_t * dst_image,
+ int32_t src_x,
+ int32_t src_y,
+ int32_t mask_x,
+ int32_t mask_y,
+ int32_t dest_x,
+ int32_t dest_y,
+ int32_t width,
+ int32_t height)
+{
+ uint32_t src;
+
+ src = _pixman_image_get_solid (src_image, dst_image->bits.format);
+
+ if (dst_image->bits.format == PIXMAN_a8)
+ {
+ src = src >> 24;
+ }
+ else if (dst_image->bits.format == PIXMAN_r5g6b5 ||
+ dst_image->bits.format == PIXMAN_b5g6r5)
+ {
+ src = CONVERT_8888_TO_0565 (src);
+ }
+
+ pixman_fill (dst_image->bits.bits, dst_image->bits.rowstride,
+ PIXMAN_FORMAT_BPP (dst_image->bits.format),
+ dest_x, dest_y,
+ width, height,
+ src);
+}
+
+static void
+fast_composite_src_memcpy (pixman_implementation_t *imp,
+ pixman_op_t op,
+ pixman_image_t * src_image,
+ pixman_image_t * mask_image,
+ pixman_image_t * dst_image,
+ int32_t src_x,
+ int32_t src_y,
+ int32_t mask_x,
+ int32_t mask_y,
+ int32_t dest_x,
+ int32_t dest_y,
+ int32_t width,
+ int32_t height)
+{
+ int bpp = PIXMAN_FORMAT_BPP (dst_image->bits.format) / 8;
+ uint32_t n_bytes = width * bpp;
+ int dst_stride, src_stride;
+ uint8_t *dst;
+ uint8_t *src;
+
+ src_stride = src_image->bits.rowstride * 4;
+ dst_stride = dst_image->bits.rowstride * 4;
+
+ src = (uint8_t *)src_image->bits.bits + src_y * src_stride + src_x * bpp;
+ dst = (uint8_t *)dst_image->bits.bits + dest_y * dst_stride + dest_x * bpp;
+
+ while (height--)
+ {
+ memcpy (dst, src, n_bytes);
+
+ dst += dst_stride;
+ src += src_stride;
+ }
+}
+
+static force_inline pixman_bool_t
+repeat (pixman_repeat_t repeat, int *c, int size)
+{
+ if (repeat == PIXMAN_REPEAT_NONE)
+ {
+ if (*c < 0 || *c >= size)
+ return FALSE;
+ }
+ else if (repeat == PIXMAN_REPEAT_NORMAL)
+ {
+ while (*c >= size)
+ *c -= size;
+ while (*c < 0)
+ *c += size;
+ }
+ else if (repeat == PIXMAN_REPEAT_PAD)
+ {
+ *c = CLIP (*c, 0, size - 1);
+ }
+ else /* REFLECT */
+ {
+ *c = MOD (*c, size * 2);
+ if (*c >= size)
+ *c = size * 2 - *c - 1;
+ }
+ return TRUE;
+}
+
+/* A macroified version of specialized nearest scalers for some
+ * common 8888 and 565 formats. It supports SRC and OVER ops.
+ *
+ * There are two repeat versions, one that handles repeat normal,
+ * and one without repeat handling that only works if the src region
+ * used is completely covered by the pre-repeated source samples.
+ *
+ * The loops are unrolled to process two pixels per iteration for better
+ * performance on most CPU architectures (superscalar processors
+ * can issue several operations simultaneously, other processors can hide
+ * instructions latencies by pipelining operations). Unrolling more
+ * does not make much sense because the compiler will start running out
+ * of spare registers soon.
+ */
+
+#define GET_8888_ALPHA(s) ((s) >> 24)
+ /* This is not actually used since we don't have an OVER with
+ 565 source, but it is needed to build. */
+#define GET_0565_ALPHA(s) 0xff
+
+#define FAST_NEAREST(scale_func_name, SRC_FORMAT, DST_FORMAT, \
+ src_type_t, dst_type_t, OP, repeat_mode) \
+static void \
+fast_composite_scaled_nearest_ ## scale_func_name ## _ ## OP (pixman_implementation_t *imp, \
+ pixman_op_t op, \
+ pixman_image_t * src_image, \
+ pixman_image_t * mask_image, \
+ pixman_image_t * dst_image, \
+ int32_t src_x, \
+ int32_t src_y, \
+ int32_t mask_x, \
+ int32_t mask_y, \
+ int32_t dst_x, \
+ int32_t dst_y, \
+ int32_t width, \
+ int32_t height) \
+{ \
+ dst_type_t *dst_line; \
+ src_type_t *src_first_line; \
+ uint32_t d; \
+ src_type_t s1, s2; \
+ uint8_t a1, a2; \
+ int w; \
+ int x1, x2, y; \
+ pixman_fixed_t orig_vx; \
+ pixman_fixed_t max_vx, max_vy; \
+ pixman_vector_t v; \
+ pixman_fixed_t vx, vy; \
+ pixman_fixed_t unit_x, unit_y; \
+ \
+ src_type_t *src; \
+ dst_type_t *dst; \
+ int src_stride, dst_stride; \
+ \
+ if (PIXMAN_OP_ ## OP != PIXMAN_OP_SRC && PIXMAN_OP_ ## OP != PIXMAN_OP_OVER) \
+ abort(); \
+ \
+ if (PIXMAN_REPEAT_ ## repeat_mode != PIXMAN_REPEAT_NORMAL && \
+ PIXMAN_REPEAT_ ## repeat_mode != PIXMAN_REPEAT_NONE) \
+ { \
+ abort(); \
+ } \
+ \
+ PIXMAN_IMAGE_GET_LINE (dst_image, dst_x, dst_y, dst_type_t, dst_stride, dst_line, 1); \
+ /* pass in 0 instead of src_x and src_y because src_x and src_y need to be \
+ * transformed from destination space to source space */ \
+ PIXMAN_IMAGE_GET_LINE (src_image, 0, 0, src_type_t, src_stride, src_first_line, 1); \
+ \
+ /* reference point is the center of the pixel */ \
+ v.vector[0] = pixman_int_to_fixed (src_x) + pixman_fixed_1 / 2; \
+ v.vector[1] = pixman_int_to_fixed (src_y) + pixman_fixed_1 / 2; \
+ v.vector[2] = pixman_fixed_1; \
+ \
+ if (!pixman_transform_point_3d (src_image->common.transform, &v)) \
+ return; \
+ \
+ unit_x = src_image->common.transform->matrix[0][0]; \
+ unit_y = src_image->common.transform->matrix[1][1]; \
+ \
+ /* Round down to closest integer, ensuring that 0.5 rounds to 0, not 1 */ \
+ v.vector[0] -= pixman_fixed_e; \
+ v.vector[1] -= pixman_fixed_e; \
+ \
+ vx = v.vector[0]; \
+ vy = v.vector[1]; \
+ \
+ if (PIXMAN_REPEAT_ ## repeat_mode == PIXMAN_REPEAT_NORMAL) \
+ { \
+ /* Clamp repeating positions inside the actual samples */ \
+ max_vx = src_image->bits.width << 16; \
+ max_vy = src_image->bits.height << 16; \
+ \
+ repeat (PIXMAN_REPEAT_NORMAL, &vx, max_vx); \
+ repeat (PIXMAN_REPEAT_NORMAL, &vy, max_vy); \
+ } \
+ \
+ orig_vx = vx; \
+ \
+ while (--height >= 0) \
+ { \
+ dst = dst_line; \
+ dst_line += dst_stride; \
+ \
+ y = vy >> 16; \
+ vy += unit_y; \
+ if (PIXMAN_REPEAT_ ## repeat_mode == PIXMAN_REPEAT_NORMAL) \
+ repeat (PIXMAN_REPEAT_NORMAL, &vy, max_vy); \
+ \
+ src = src_first_line + src_stride * y; \
+ \
+ w = width; \
+ vx = orig_vx; \
+ while ((w -= 2) >= 0) \
+ { \
+ x1 = vx >> 16; \
+ vx += unit_x; \
+ if (PIXMAN_REPEAT_ ## repeat_mode == PIXMAN_REPEAT_NORMAL) \
+ { \
+ /* This works because we know that unit_x is positive */ \
+ while (vx >= max_vx) \
+ vx -= max_vx; \
+ } \
+ s1 = src[x1]; \
+ \
+ x2 = vx >> 16; \
+ vx += unit_x; \
+ if (PIXMAN_REPEAT_ ## repeat_mode == PIXMAN_REPEAT_NORMAL) \
+ { \
+ /* This works because we know that unit_x is positive */ \
+ while (vx >= max_vx) \
+ vx -= max_vx; \
+ } \
+ s2 = src[x2]; \
+ \
+ if (PIXMAN_OP_ ## OP == PIXMAN_OP_OVER) \
+ { \
+ a1 = GET_ ## SRC_FORMAT ## _ALPHA(s1); \
+ a2 = GET_ ## SRC_FORMAT ## _ALPHA(s2); \
+ \
+ if (a1 == 0xff) \
+ { \
+ *dst = CONVERT_ ## SRC_FORMAT ## _TO_ ## DST_FORMAT (s1); \
+ } \
+ else if (s1) \
+ { \
+ d = CONVERT_ ## DST_FORMAT ## _TO_8888 (*dst); \
+ s1 = CONVERT_ ## SRC_FORMAT ## _TO_8888 (s1); \
+ a1 ^= 0xff; \
+ UN8x4_MUL_UN8_ADD_UN8x4 (d, a1, s1); \
+ *dst = CONVERT_8888_TO_ ## DST_FORMAT (d); \
+ } \
+ dst++; \
+ \
+ if (a2 == 0xff) \
+ { \
+ *dst = CONVERT_ ## SRC_FORMAT ## _TO_ ## DST_FORMAT (s2); \
+ } \
+ else if (s2) \
+ { \
+ d = CONVERT_## DST_FORMAT ## _TO_8888 (*dst); \
+ s2 = CONVERT_## SRC_FORMAT ## _TO_8888 (s2); \
+ a2 ^= 0xff; \
+ UN8x4_MUL_UN8_ADD_UN8x4 (d, a2, s2); \
+ *dst = CONVERT_8888_TO_ ## DST_FORMAT (d); \
+ } \
+ dst++; \
+ } \
+ else /* PIXMAN_OP_SRC */ \
+ { \
+ *dst++ = CONVERT_ ## SRC_FORMAT ## _TO_ ## DST_FORMAT (s1); \
+ *dst++ = CONVERT_ ## SRC_FORMAT ## _TO_ ## DST_FORMAT (s2); \
+ } \
+ } \
+ \
+ if (w & 1) \
+ { \
+ x1 = vx >> 16; \
+ vx += unit_x; \
+ if (PIXMAN_REPEAT_ ## repeat_mode == PIXMAN_REPEAT_NORMAL) \
+ { \
+ /* This works because we know that unit_x is positive */ \
+ while (vx >= max_vx) \
+ vx -= max_vx; \
+ } \
+ s1 = src[x1]; \
+ \
+ if (PIXMAN_OP_ ## OP == PIXMAN_OP_OVER) \
+ { \
+ a1 = GET_ ## SRC_FORMAT ## _ALPHA(s1); \
+ \
+ if (a1 == 0xff) \
+ { \
+ *dst = CONVERT_ ## SRC_FORMAT ## _TO_ ## DST_FORMAT (s1); \
+ } \
+ else if (s1) \
+ { \
+ d = CONVERT_## DST_FORMAT ## _TO_8888 (*dst); \
+ s1 = CONVERT_ ## SRC_FORMAT ## _TO_8888 (s1); \
+ a1 ^= 0xff; \
+ UN8x4_MUL_UN8_ADD_UN8x4 (d, a1, s1); \
+ *dst = CONVERT_8888_TO_ ## DST_FORMAT (d); \
+ } \
+ dst++; \
+ } \
+ else /* PIXMAN_OP_SRC */ \
+ { \
+ *dst++ = CONVERT_ ## SRC_FORMAT ## _TO_ ## DST_FORMAT (s1); \
+ } \
+ } \
+ } \
+}
+
+FAST_NEAREST (8888_8888_none, 8888, 8888, uint32_t, uint32_t, SRC, NONE);
+FAST_NEAREST (8888_8888_normal, 8888, 8888, uint32_t, uint32_t, SRC, NORMAL);
+FAST_NEAREST (8888_8888_none, 8888, 8888, uint32_t, uint32_t, OVER, NONE);
+FAST_NEAREST (8888_8888_normal, 8888, 8888, uint32_t, uint32_t, OVER, NORMAL);
+FAST_NEAREST (8888_565_none, 8888, 0565, uint32_t, uint16_t, SRC, NONE);
+FAST_NEAREST (8888_565_normal, 8888, 0565, uint32_t, uint16_t, SRC, NORMAL);
+FAST_NEAREST (565_565_none, 0565, 0565, uint16_t, uint16_t, SRC, NONE);
+FAST_NEAREST (565_565_normal, 0565, 0565, uint16_t, uint16_t, SRC, NORMAL);
+FAST_NEAREST (8888_565_none, 8888, 0565, uint32_t, uint16_t, OVER, NONE);
+FAST_NEAREST (8888_565_normal, 8888, 0565, uint32_t, uint16_t, OVER, NORMAL);
+
+static force_inline uint32_t
+fetch_nearest (pixman_repeat_t src_repeat,
+ pixman_format_code_t format,
+ uint32_t *src, int x, int src_width)
+{
+ if (repeat (src_repeat, &x, src_width))
+ {
+ if (format == PIXMAN_x8r8g8b8)
+ return *(src + x) | 0xff000000;
+ else
+ return *(src + x);
+ }
+ else
+ {
+ return 0;
+ }
+}
+
+static force_inline void
+combine_over (uint32_t s, uint32_t *dst)
+{
+ if (s)
+ {
+ uint8_t ia = 0xff - (s >> 24);
+
+ if (ia)
+ UN8x4_MUL_UN8_ADD_UN8x4 (*dst, ia, s);
+ else
+ *dst = s;
+ }
+}
+
+static force_inline void
+combine_src (uint32_t s, uint32_t *dst)
+{
+ *dst = s;
+}
+
+static void
+fast_composite_scaled_nearest (pixman_implementation_t *imp,
+ pixman_op_t op,
+ pixman_image_t * src_image,
+ pixman_image_t * mask_image,
+ pixman_image_t * dst_image,
+ int32_t src_x,
+ int32_t src_y,
+ int32_t mask_x,
+ int32_t mask_y,
+ int32_t dest_x,
+ int32_t dest_y,
+ int32_t width,
+ int32_t height)
+{
+ uint32_t *dst_line;
+ uint32_t *src_line;
+ int dst_stride, src_stride;
+ int src_width, src_height;
+ pixman_repeat_t src_repeat;
+ pixman_fixed_t unit_x, unit_y;
+ pixman_format_code_t src_format;
+ pixman_vector_t v;
+ pixman_fixed_t vy;
+
+ PIXMAN_IMAGE_GET_LINE (dst_image, dest_x, dest_y, uint32_t, dst_stride, dst_line, 1);
+ /* pass in 0 instead of src_x and src_y because src_x and src_y need to be
+ * transformed from destination space to source space
+ */
+ PIXMAN_IMAGE_GET_LINE (src_image, 0, 0, uint32_t, src_stride, src_line, 1);
+
+ /* reference point is the center of the pixel */
+ v.vector[0] = pixman_int_to_fixed (src_x) + pixman_fixed_1 / 2;
+ v.vector[1] = pixman_int_to_fixed (src_y) + pixman_fixed_1 / 2;
+ v.vector[2] = pixman_fixed_1;
+
+ if (!pixman_transform_point_3d (src_image->common.transform, &v))
+ return;
+
+ unit_x = src_image->common.transform->matrix[0][0];
+ unit_y = src_image->common.transform->matrix[1][1];
+
+ /* Round down to closest integer, ensuring that 0.5 rounds to 0, not 1 */
+ v.vector[0] -= pixman_fixed_e;
+ v.vector[1] -= pixman_fixed_e;
+
+ src_height = src_image->bits.height;
+ src_width = src_image->bits.width;
+ src_repeat = src_image->common.repeat;
+ src_format = src_image->bits.format;
+
+ vy = v.vector[1];
+ while (height--)
+ {
+ pixman_fixed_t vx = v.vector[0];
+ int y = pixman_fixed_to_int (vy);
+ uint32_t *dst = dst_line;
+
+ dst_line += dst_stride;
+
+ /* adjust the y location by a unit vector in the y direction
+ * this is equivalent to transforming y+1 of the destination point to source space */
+ vy += unit_y;
+
+ if (!repeat (src_repeat, &y, src_height))
+ {
+ if (op == PIXMAN_OP_SRC)
+ memset (dst, 0, sizeof (*dst) * width);
+ }
+ else
+ {
+ int w = width;
+
+ uint32_t *src = src_line + y * src_stride;
+
+ while (w >= 2)
+ {
+ uint32_t s1, s2;
+ int x1, x2;
+
+ x1 = pixman_fixed_to_int (vx);
+ vx += unit_x;
+
+ x2 = pixman_fixed_to_int (vx);
+ vx += unit_x;
+
+ w -= 2;
+
+ s1 = fetch_nearest (src_repeat, src_format, src, x1, src_width);
+ s2 = fetch_nearest (src_repeat, src_format, src, x2, src_width);
+
+ if (op == PIXMAN_OP_OVER)
+ {
+ combine_over (s1, dst++);
+ combine_over (s2, dst++);
+ }
+ else
+ {
+ combine_src (s1, dst++);
+ combine_src (s2, dst++);
+ }
+ }
+
+ while (w--)
+ {
+ uint32_t s;
+ int x;
+
+ x = pixman_fixed_to_int (vx);
+ vx += unit_x;
+
+ s = fetch_nearest (src_repeat, src_format, src, x, src_width);
+
+ if (op == PIXMAN_OP_OVER)
+ combine_over (s, dst++);
+ else
+ combine_src (s, dst++);
+ }
+ }
+ }
+}
+
+static const pixman_fast_path_t c_fast_paths[] =
+{
+ PIXMAN_STD_FAST_PATH (OVER, solid, a8, r5g6b5, fast_composite_over_n_8_0565),
+ PIXMAN_STD_FAST_PATH (OVER, solid, a8, b5g6r5, fast_composite_over_n_8_0565),
+ PIXMAN_STD_FAST_PATH (OVER, solid, a8, r8g8b8, fast_composite_over_n_8_0888),
+ PIXMAN_STD_FAST_PATH (OVER, solid, a8, b8g8r8, fast_composite_over_n_8_0888),
+ PIXMAN_STD_FAST_PATH (OVER, solid, a8, a8r8g8b8, fast_composite_over_n_8_8888),
+ PIXMAN_STD_FAST_PATH (OVER, solid, a8, x8r8g8b8, fast_composite_over_n_8_8888),
+ PIXMAN_STD_FAST_PATH (OVER, solid, a8, a8b8g8r8, fast_composite_over_n_8_8888),
+ PIXMAN_STD_FAST_PATH (OVER, solid, a8, x8b8g8r8, fast_composite_over_n_8_8888),
+ PIXMAN_STD_FAST_PATH (OVER, solid, a1, a8r8g8b8, fast_composite_over_n_1_8888),
+ PIXMAN_STD_FAST_PATH (OVER, solid, a1, x8r8g8b8, fast_composite_over_n_1_8888),
+ PIXMAN_STD_FAST_PATH (OVER, solid, a1, a8b8g8r8, fast_composite_over_n_1_8888),
+ PIXMAN_STD_FAST_PATH (OVER, solid, a1, x8b8g8r8, fast_composite_over_n_1_8888),
+ PIXMAN_STD_FAST_PATH (OVER, solid, a1, r5g6b5, fast_composite_over_n_1_0565),
+ PIXMAN_STD_FAST_PATH (OVER, solid, a1, b5g6r5, fast_composite_over_n_1_0565),
+ PIXMAN_STD_FAST_PATH_CA (OVER, solid, a8r8g8b8, a8r8g8b8, fast_composite_over_n_8888_8888_ca),
+ PIXMAN_STD_FAST_PATH_CA (OVER, solid, a8r8g8b8, x8r8g8b8, fast_composite_over_n_8888_8888_ca),
+ PIXMAN_STD_FAST_PATH_CA (OVER, solid, a8r8g8b8, r5g6b5, fast_composite_over_n_8888_0565_ca),
+ PIXMAN_STD_FAST_PATH_CA (OVER, solid, a8b8g8r8, a8b8g8r8, fast_composite_over_n_8888_8888_ca),
+ PIXMAN_STD_FAST_PATH_CA (OVER, solid, a8b8g8r8, x8b8g8r8, fast_composite_over_n_8888_8888_ca),
+ PIXMAN_STD_FAST_PATH_CA (OVER, solid, a8b8g8r8, b5g6r5, fast_composite_over_n_8888_0565_ca),
+ PIXMAN_STD_FAST_PATH (OVER, x8r8g8b8, a8, x8r8g8b8, fast_composite_over_x888_8_8888),
+ PIXMAN_STD_FAST_PATH (OVER, x8r8g8b8, a8, a8r8g8b8, fast_composite_over_x888_8_8888),
+ PIXMAN_STD_FAST_PATH (OVER, x8b8g8r8, a8, x8b8g8r8, fast_composite_over_x888_8_8888),
+ PIXMAN_STD_FAST_PATH (OVER, x8b8g8r8, a8, a8b8g8r8, fast_composite_over_x888_8_8888),
+ PIXMAN_STD_FAST_PATH (OVER, a8r8g8b8, null, a8r8g8b8, fast_composite_over_8888_8888),
+ PIXMAN_STD_FAST_PATH (OVER, a8r8g8b8, null, x8r8g8b8, fast_composite_over_8888_8888),
+ PIXMAN_STD_FAST_PATH (OVER, a8r8g8b8, null, r5g6b5, fast_composite_over_8888_0565),
+ PIXMAN_STD_FAST_PATH (OVER, a8b8g8r8, null, a8b8g8r8, fast_composite_over_8888_8888),
+ PIXMAN_STD_FAST_PATH (OVER, a8b8g8r8, null, x8b8g8r8, fast_composite_over_8888_8888),
+ PIXMAN_STD_FAST_PATH (OVER, a8b8g8r8, null, b5g6r5, fast_composite_over_8888_0565),
+ PIXMAN_STD_FAST_PATH (ADD, a8r8g8b8, null, a8r8g8b8, fast_composite_add_8888_8888),
+ PIXMAN_STD_FAST_PATH (ADD, a8b8g8r8, null, a8b8g8r8, fast_composite_add_8888_8888),
+ PIXMAN_STD_FAST_PATH (ADD, a8, null, a8, fast_composite_add_8000_8000),
+ PIXMAN_STD_FAST_PATH (ADD, a1, null, a1, fast_composite_add_1000_1000),
+ PIXMAN_STD_FAST_PATH_CA (ADD, solid, a8r8g8b8, a8r8g8b8, fast_composite_add_n_8888_8888_ca),
+ PIXMAN_STD_FAST_PATH (ADD, solid, a8, a8, fast_composite_add_n_8_8),
+ PIXMAN_STD_FAST_PATH (SRC, solid, null, a8r8g8b8, fast_composite_solid_fill),
+ PIXMAN_STD_FAST_PATH (SRC, solid, null, x8r8g8b8, fast_composite_solid_fill),
+ PIXMAN_STD_FAST_PATH (SRC, solid, null, a8b8g8r8, fast_composite_solid_fill),
+ PIXMAN_STD_FAST_PATH (SRC, solid, null, x8b8g8r8, fast_composite_solid_fill),
+ PIXMAN_STD_FAST_PATH (SRC, solid, null, a8, fast_composite_solid_fill),
+ PIXMAN_STD_FAST_PATH (SRC, solid, null, r5g6b5, fast_composite_solid_fill),
+ PIXMAN_STD_FAST_PATH (SRC, x8r8g8b8, null, a8r8g8b8, fast_composite_src_x888_8888),
+ PIXMAN_STD_FAST_PATH (SRC, x8b8g8r8, null, a8b8g8r8, fast_composite_src_x888_8888),
+ PIXMAN_STD_FAST_PATH (SRC, a8r8g8b8, null, x8r8g8b8, fast_composite_src_memcpy),
+ PIXMAN_STD_FAST_PATH (SRC, a8r8g8b8, null, a8r8g8b8, fast_composite_src_memcpy),
+ PIXMAN_STD_FAST_PATH (SRC, x8r8g8b8, null, x8r8g8b8, fast_composite_src_memcpy),
+ PIXMAN_STD_FAST_PATH (SRC, a8b8g8r8, null, x8b8g8r8, fast_composite_src_memcpy),
+ PIXMAN_STD_FAST_PATH (SRC, a8b8g8r8, null, a8b8g8r8, fast_composite_src_memcpy),
+ PIXMAN_STD_FAST_PATH (SRC, x8b8g8r8, null, x8b8g8r8, fast_composite_src_memcpy),
+ PIXMAN_STD_FAST_PATH (SRC, b8g8r8a8, null, b8g8r8x8, fast_composite_src_memcpy),
+ PIXMAN_STD_FAST_PATH (SRC, b8g8r8a8, null, b8g8r8a8, fast_composite_src_memcpy),
+ PIXMAN_STD_FAST_PATH (SRC, b8g8r8x8, null, b8g8r8x8, fast_composite_src_memcpy),
+ PIXMAN_STD_FAST_PATH (SRC, r5g6b5, null, r5g6b5, fast_composite_src_memcpy),
+ PIXMAN_STD_FAST_PATH (SRC, b5g6r5, null, b5g6r5, fast_composite_src_memcpy),
+ PIXMAN_STD_FAST_PATH (SRC, r8g8b8, null, r8g8b8, fast_composite_src_memcpy),
+ PIXMAN_STD_FAST_PATH (SRC, b8g8r8, null, b8g8r8, fast_composite_src_memcpy),
+ PIXMAN_STD_FAST_PATH (SRC, x1r5g5b5, null, x1r5g5b5, fast_composite_src_memcpy),
+ PIXMAN_STD_FAST_PATH (SRC, a1r5g5b5, null, x1r5g5b5, fast_composite_src_memcpy),
+ PIXMAN_STD_FAST_PATH (SRC, a8, null, a8, fast_composite_src_memcpy),
+ PIXMAN_STD_FAST_PATH (SRC, a8r8g8b8, null, r5g6b5, fast_composite_src_x888_0565),
+ PIXMAN_STD_FAST_PATH (SRC, x8r8g8b8, null, r5g6b5, fast_composite_src_x888_0565),
+ PIXMAN_STD_FAST_PATH (SRC, a8b8g8r8, null, b5g6r5, fast_composite_src_x888_0565),
+ PIXMAN_STD_FAST_PATH (SRC, x8b8g8r8, null, b5g6r5, fast_composite_src_x888_0565),
+ PIXMAN_STD_FAST_PATH (IN, a8, null, a8, fast_composite_in_8_8),
+ PIXMAN_STD_FAST_PATH (IN, solid, a8, a8, fast_composite_in_n_8_8),
+
+#define SCALED_NEAREST_FLAGS \
+ (FAST_PATH_SCALE_TRANSFORM | \
+ FAST_PATH_NO_ALPHA_MAP | \
+ FAST_PATH_NEAREST_FILTER | \
+ FAST_PATH_NO_ACCESSORS | \
+ FAST_PATH_NO_WIDE_FORMAT)
+
+#define HAS_NORMAL_REPEAT_FLAGS \
+ (FAST_PATH_NO_REFLECT_REPEAT | \
+ FAST_PATH_NO_PAD_REPEAT | \
+ FAST_PATH_NO_NONE_REPEAT)
+
+#define SIMPLE_NEAREST_FAST_PATH(op,s,d,func) \
+ { PIXMAN_OP_ ## op, \
+ PIXMAN_ ## s, \
+ SCALED_NEAREST_FLAGS | HAS_NORMAL_REPEAT_FLAGS | FAST_PATH_16BIT_SAFE | FAST_PATH_X_UNIT_POSITIVE, \
+ PIXMAN_null, 0, \
+ PIXMAN_ ## d, FAST_PATH_STD_DEST_FLAGS, \
+ fast_composite_scaled_nearest_ ## func ## _normal ## _ ## op, \
+ }, \
+ { PIXMAN_OP_ ## op, \
+ PIXMAN_ ## s, \
+ SCALED_NEAREST_FLAGS | FAST_PATH_SAMPLES_COVER_CLIP, \
+ PIXMAN_null, 0, \
+ PIXMAN_ ## d, FAST_PATH_STD_DEST_FLAGS, \
+ fast_composite_scaled_nearest_ ## func ## _none ## _ ## op, \
+ }
+ SIMPLE_NEAREST_FAST_PATH (SRC, x8r8g8b8, x8r8g8b8, 8888_8888),
+ SIMPLE_NEAREST_FAST_PATH (SRC, a8r8g8b8, x8r8g8b8, 8888_8888),
+ SIMPLE_NEAREST_FAST_PATH (SRC, x8b8g8r8, x8b8g8r8, 8888_8888),
+ SIMPLE_NEAREST_FAST_PATH (SRC, a8b8g8r8, x8b8g8r8, 8888_8888),
+
+ SIMPLE_NEAREST_FAST_PATH (SRC, a8r8g8b8, a8r8g8b8, 8888_8888),
+ SIMPLE_NEAREST_FAST_PATH (SRC, a8b8g8r8, a8b8g8r8, 8888_8888),
+
+ SIMPLE_NEAREST_FAST_PATH (SRC, x8r8g8b8, r5g6b5, 8888_565),
+ SIMPLE_NEAREST_FAST_PATH (SRC, a8r8g8b8, r5g6b5, 8888_565),
+
+ SIMPLE_NEAREST_FAST_PATH (SRC, r5g6b5, r5g6b5, 565_565),
+
+ SIMPLE_NEAREST_FAST_PATH (OVER, a8r8g8b8, x8r8g8b8, 8888_8888),
+ SIMPLE_NEAREST_FAST_PATH (OVER, a8b8g8r8, x8b8g8r8, 8888_8888),
+ SIMPLE_NEAREST_FAST_PATH (OVER, a8r8g8b8, a8r8g8b8, 8888_8888),
+ SIMPLE_NEAREST_FAST_PATH (OVER, a8b8g8r8, a8b8g8r8, 8888_8888),
+
+ SIMPLE_NEAREST_FAST_PATH (OVER, a8r8g8b8, r5g6b5, 8888_565),
+
+#define NEAREST_FAST_PATH(op,s,d) \
+ { PIXMAN_OP_ ## op, \
+ PIXMAN_ ## s, SCALED_NEAREST_FLAGS, \
+ PIXMAN_null, 0, \
+ PIXMAN_ ## d, FAST_PATH_STD_DEST_FLAGS, \
+ fast_composite_scaled_nearest, \
+ }
+
+ NEAREST_FAST_PATH (SRC, x8r8g8b8, x8r8g8b8),
+ NEAREST_FAST_PATH (SRC, a8r8g8b8, x8r8g8b8),
+ NEAREST_FAST_PATH (SRC, x8b8g8r8, x8b8g8r8),
+ NEAREST_FAST_PATH (SRC, a8b8g8r8, x8b8g8r8),
+
+ NEAREST_FAST_PATH (SRC, x8r8g8b8, a8r8g8b8),
+ NEAREST_FAST_PATH (SRC, a8r8g8b8, a8r8g8b8),
+ NEAREST_FAST_PATH (SRC, x8b8g8r8, a8b8g8r8),
+ NEAREST_FAST_PATH (SRC, a8b8g8r8, a8b8g8r8),
+
+ NEAREST_FAST_PATH (OVER, x8r8g8b8, x8r8g8b8),
+ NEAREST_FAST_PATH (OVER, a8r8g8b8, x8r8g8b8),
+ NEAREST_FAST_PATH (OVER, x8b8g8r8, x8b8g8r8),
+ NEAREST_FAST_PATH (OVER, a8b8g8r8, x8b8g8r8),
+
+ NEAREST_FAST_PATH (OVER, x8r8g8b8, a8r8g8b8),
+ NEAREST_FAST_PATH (OVER, a8r8g8b8, a8r8g8b8),
+ NEAREST_FAST_PATH (OVER, x8b8g8r8, a8b8g8r8),
+ NEAREST_FAST_PATH (OVER, a8b8g8r8, a8b8g8r8),
+
+ { PIXMAN_OP_NONE },
+};
+
+static void
+pixman_fill8 (uint32_t *bits,
+ int stride,
+ int x,
+ int y,
+ int width,
+ int height,
+ uint32_t xor)
+{
+ int byte_stride = stride * (int) sizeof (uint32_t);
+ uint8_t *dst = (uint8_t *) bits;
+ uint8_t v = xor & 0xff;
+ int i;
+
+ dst = dst + y * byte_stride + x;
+
+ while (height--)
+ {
+ for (i = 0; i < width; ++i)
+ dst[i] = v;
+
+ dst += byte_stride;
+ }
+}
+
+static void
+pixman_fill16 (uint32_t *bits,
+ int stride,
+ int x,
+ int y,
+ int width,
+ int height,
+ uint32_t xor)
+{
+ int short_stride =
+ (stride * (int)sizeof (uint32_t)) / (int)sizeof (uint16_t);
+ uint16_t *dst = (uint16_t *)bits;
+ uint16_t v = xor & 0xffff;
+ int i;
+
+ dst = dst + y * short_stride + x;
+
+ while (height--)
+ {
+ for (i = 0; i < width; ++i)
+ dst[i] = v;
+
+ dst += short_stride;
+ }
+}
+
+static void
+pixman_fill32 (uint32_t *bits,
+ int stride,
+ int x,
+ int y,
+ int width,
+ int height,
+ uint32_t xor)
+{
+ int i;
+
+ bits = bits + y * stride + x;
+
+ while (height--)
+ {
+ for (i = 0; i < width; ++i)
+ bits[i] = xor;
+
+ bits += stride;
+ }
+}
+
+static pixman_bool_t
+fast_path_fill (pixman_implementation_t *imp,
+ uint32_t * bits,
+ int stride,
+ int bpp,
+ int x,
+ int y,
+ int width,
+ int height,
+ uint32_t xor)
+{
+ switch (bpp)
+ {
+ case 8:
+ pixman_fill8 (bits, stride, x, y, width, height, xor);
+ break;
+
+ case 16:
+ pixman_fill16 (bits, stride, x, y, width, height, xor);
+ break;
+
+ case 32:
+ pixman_fill32 (bits, stride, x, y, width, height, xor);
+ break;
+
+ default:
+ return _pixman_implementation_fill (
+ imp->delegate, bits, stride, bpp, x, y, width, height, xor);
+ break;
+ }
+
+ return TRUE;
+}
+
+pixman_implementation_t *
+_pixman_implementation_create_fast_path (void)
+{
+ pixman_implementation_t *general = _pixman_implementation_create_general ();
+ pixman_implementation_t *imp = _pixman_implementation_create (general, c_fast_paths);
+
+ imp->fill = fast_path_fill;
+
+ return imp;
+}
diff --git a/pixman/pixman/pixman-general.c b/pixman/pixman/pixman-general.c index bddf79aae..fa22049df 100644 --- a/pixman/pixman/pixman-general.c +++ b/pixman/pixman/pixman-general.c @@ -1,320 +1,319 @@ -/* - * Copyright © 2009 Red Hat, Inc. - * Copyright © 2000 SuSE, Inc. - * Copyright © 2007 Red Hat, Inc. - * Copyright © 2000 Keith Packard, member of The XFree86 Project, Inc. - * 2005 Lars Knoll & Zack Rusin, Trolltech - * 2008 Aaron Plattner, NVIDIA Corporation - * - * Permission to use, copy, modify, distribute, and sell this software and its - * documentation for any purpose is hereby granted without fee, provided that - * the above copyright notice appear in all copies and that both that - * copyright notice and this permission notice appear in supporting - * documentation, and that the name of Red Hat not be used in advertising or - * publicity pertaining to distribution of the software without specific, - * written prior permission. Red Hat makes no representations about the - * suitability of this software for any purpose. It is provided "as is" - * without express or implied warranty. - * - * THE COPYRIGHT HOLDERS DISCLAIM ALL WARRANTIES WITH REGARD TO THIS - * SOFTWARE, INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND - * FITNESS, IN NO EVENT SHALL THE COPYRIGHT HOLDERS BE LIABLE FOR ANY - * SPECIAL, INDIRECT OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES - * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN - * AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING - * OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS - * SOFTWARE. - */ -#ifdef HAVE_CONFIG_H -#include <config.h> -#endif -#include <stdlib.h> -#include <string.h> -#include <math.h> -#include <limits.h> -#include <stdio.h> -#include <stdlib.h> -#include <string.h> -#include "pixman-private.h" -#include "pixman-combine32.h" -#include "pixman-private.h" - -#define SCANLINE_BUFFER_LENGTH 8192 - -static void -general_composite_rect (pixman_implementation_t *imp, - pixman_op_t op, - pixman_image_t * src, - pixman_image_t * mask, - pixman_image_t * dest, - int32_t src_x, - int32_t src_y, - int32_t mask_x, - int32_t mask_y, - int32_t dest_x, - int32_t dest_y, - int32_t width, - int32_t height) -{ - uint8_t stack_scanline_buffer[SCANLINE_BUFFER_LENGTH * 3]; - const pixman_format_code_t src_format = - src->type == BITS ? src->bits.format : 0; - const pixman_format_code_t mask_format = - mask && mask->type == BITS ? mask->bits.format : 0; - const pixman_format_code_t dest_format = - dest->type == BITS ? dest->bits.format : 0; - const int src_wide = PIXMAN_FORMAT_IS_WIDE (src_format); - const int mask_wide = mask && PIXMAN_FORMAT_IS_WIDE (mask_format); - const int dest_wide = PIXMAN_FORMAT_IS_WIDE (dest_format); - const int wide = src_wide || mask_wide || dest_wide; - const int Bpp = wide ? 8 : 4; - uint8_t *scanline_buffer = stack_scanline_buffer; - uint8_t *src_buffer, *mask_buffer, *dest_buffer; - fetch_scanline_t fetch_src = NULL, fetch_mask = NULL, fetch_dest = NULL; - pixman_combine_32_func_t compose; - store_scanline_t store; - source_image_class_t src_class, mask_class; - pixman_bool_t component_alpha; - uint32_t *bits; - int32_t stride; - int i; - - if (width * Bpp > SCANLINE_BUFFER_LENGTH) - { - scanline_buffer = pixman_malloc_abc (width, 3, Bpp); - - if (!scanline_buffer) - return; - } - - src_buffer = scanline_buffer; - mask_buffer = src_buffer + width * Bpp; - dest_buffer = mask_buffer + width * Bpp; - - src_class = _pixman_image_classify (src, - src_x, src_y, - width, height); - - mask_class = SOURCE_IMAGE_CLASS_UNKNOWN; - - if (mask) - { - mask_class = _pixman_image_classify (mask, - src_x, src_y, - width, height); - } - - if (op == PIXMAN_OP_CLEAR) - fetch_src = NULL; - else if (wide) - fetch_src = _pixman_image_get_scanline_64; - else - fetch_src = _pixman_image_get_scanline_32; - - if (!mask || op == PIXMAN_OP_CLEAR) - fetch_mask = NULL; - else if (wide) - fetch_mask = _pixman_image_get_scanline_64; - else - fetch_mask = _pixman_image_get_scanline_32; - - if (op == PIXMAN_OP_CLEAR || op == PIXMAN_OP_SRC) - fetch_dest = NULL; - else if (wide) - fetch_dest = _pixman_image_get_scanline_64; - else - fetch_dest = _pixman_image_get_scanline_32; - - if (wide) - store = _pixman_image_store_scanline_64; - else - store = _pixman_image_store_scanline_32; - - /* Skip the store step and composite directly into the - * destination if the output format of the compose func matches - * the destination format. - * - * If the destination format is a8r8g8b8 then we can always do - * this. If it is x8r8g8b8, then we can only do it if the - * operator doesn't make use of destination alpha. - */ - if ((dest->bits.format == PIXMAN_a8r8g8b8) || - (dest->bits.format == PIXMAN_x8r8g8b8 && - (op == PIXMAN_OP_OVER || - op == PIXMAN_OP_ADD || - op == PIXMAN_OP_SRC || - op == PIXMAN_OP_CLEAR || - op == PIXMAN_OP_IN_REVERSE || - op == PIXMAN_OP_OUT_REVERSE || - op == PIXMAN_OP_DST))) - { - if (!wide && - !dest->common.alpha_map && - !dest->bits.write_func) - { - store = NULL; - } - } - - if (!store) - { - bits = dest->bits.bits; - stride = dest->bits.rowstride; - } - else - { - bits = NULL; - stride = 0; - } - - component_alpha = - fetch_src && - fetch_mask && - mask && - mask->common.type == BITS && - mask->common.component_alpha && - PIXMAN_FORMAT_RGB (mask->bits.format); - - if (wide) - { - if (component_alpha) - compose = (pixman_combine_32_func_t)_pixman_implementation_combine_64_ca; - else - compose = (pixman_combine_32_func_t)_pixman_implementation_combine_64; - } - else - { - if (component_alpha) - compose = _pixman_implementation_combine_32_ca; - else - compose = _pixman_implementation_combine_32; - } - - if (!compose) - return; - - if (!fetch_mask) - mask_buffer = NULL; - - for (i = 0; i < height; ++i) - { - /* fill first half of scanline with source */ - if (fetch_src) - { - if (fetch_mask) - { - /* fetch mask before source so that fetching of - source can be optimized */ - fetch_mask (mask, mask_x, mask_y + i, - width, (void *)mask_buffer, 0, 0); - - if (mask_class == SOURCE_IMAGE_CLASS_HORIZONTAL) - fetch_mask = NULL; - } - - if (src_class == SOURCE_IMAGE_CLASS_HORIZONTAL) - { - fetch_src (src, src_x, src_y + i, - width, (void *)src_buffer, 0, 0); - fetch_src = NULL; - } - else - { - fetch_src (src, src_x, src_y + i, - width, (void *)src_buffer, (void *)mask_buffer, - 0xffffffff); - } - } - else if (fetch_mask) - { - fetch_mask (mask, mask_x, mask_y + i, - width, (void *)mask_buffer, 0, 0); - } - - if (store) - { - /* fill dest into second half of scanline */ - if (fetch_dest) - { - fetch_dest (dest, dest_x, dest_y + i, - width, (void *)dest_buffer, 0, 0); - } - - /* blend */ - compose (imp->toplevel, op, - (void *)dest_buffer, - (void *)src_buffer, - (void *)mask_buffer, - width); - - /* write back */ - store (&(dest->bits), dest_x, dest_y + i, width, - (void *)dest_buffer); - } - else - { - /* blend */ - compose (imp->toplevel, op, - bits + (dest_y + i) * stride + dest_x, - (void *)src_buffer, (void *)mask_buffer, width); - } - } - - if (scanline_buffer != stack_scanline_buffer) - free (scanline_buffer); -} - -static const pixman_fast_path_t general_fast_path[] = -{ - { PIXMAN_OP_any, PIXMAN_any, 0, PIXMAN_any, 0, PIXMAN_any, 0, general_composite_rect }, - { PIXMAN_OP_NONE } -}; - -static pixman_bool_t -general_blt (pixman_implementation_t *imp, - uint32_t * src_bits, - uint32_t * dst_bits, - int src_stride, - int dst_stride, - int src_bpp, - int dst_bpp, - int src_x, - int src_y, - int dst_x, - int dst_y, - int width, - int height) -{ - /* We can't blit unless we have sse2 or mmx */ - - return FALSE; -} - -static pixman_bool_t -general_fill (pixman_implementation_t *imp, - uint32_t * bits, - int stride, - int bpp, - int x, - int y, - int width, - int height, - uint32_t xor) -{ - return FALSE; -} - -pixman_implementation_t * -_pixman_implementation_create_general (void) -{ - pixman_implementation_t *imp = _pixman_implementation_create (NULL, general_fast_path); - - _pixman_setup_combiner_functions_32 (imp); - _pixman_setup_combiner_functions_64 (imp); - - imp->blt = general_blt; - imp->fill = general_fill; - - return imp; -} - +/*
+ * Copyright © 2009 Red Hat, Inc.
+ * Copyright © 2000 SuSE, Inc.
+ * Copyright © 2007 Red Hat, Inc.
+ * Copyright © 2000 Keith Packard, member of The XFree86 Project, Inc.
+ * 2005 Lars Knoll & Zack Rusin, Trolltech
+ * 2008 Aaron Plattner, NVIDIA Corporation
+ *
+ * Permission to use, copy, modify, distribute, and sell this software and its
+ * documentation for any purpose is hereby granted without fee, provided that
+ * the above copyright notice appear in all copies and that both that
+ * copyright notice and this permission notice appear in supporting
+ * documentation, and that the name of Red Hat not be used in advertising or
+ * publicity pertaining to distribution of the software without specific,
+ * written prior permission. Red Hat makes no representations about the
+ * suitability of this software for any purpose. It is provided "as is"
+ * without express or implied warranty.
+ *
+ * THE COPYRIGHT HOLDERS DISCLAIM ALL WARRANTIES WITH REGARD TO THIS
+ * SOFTWARE, INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND
+ * FITNESS, IN NO EVENT SHALL THE COPYRIGHT HOLDERS BE LIABLE FOR ANY
+ * SPECIAL, INDIRECT OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN
+ * AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING
+ * OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS
+ * SOFTWARE.
+ */
+#ifdef HAVE_CONFIG_H
+#include <config.h>
+#endif
+#include <stdlib.h>
+#include <string.h>
+#include <math.h>
+#include <limits.h>
+#include <stdio.h>
+#include <stdlib.h>
+#include <string.h>
+#include "pixman-private.h"
+#include "pixman-combine32.h"
+#include "pixman-private.h"
+
+#define SCANLINE_BUFFER_LENGTH 8192
+
+static void
+general_composite_rect (pixman_implementation_t *imp,
+ pixman_op_t op,
+ pixman_image_t * src,
+ pixman_image_t * mask,
+ pixman_image_t * dest,
+ int32_t src_x,
+ int32_t src_y,
+ int32_t mask_x,
+ int32_t mask_y,
+ int32_t dest_x,
+ int32_t dest_y,
+ int32_t width,
+ int32_t height)
+{
+ uint8_t stack_scanline_buffer[SCANLINE_BUFFER_LENGTH * 3];
+ const pixman_format_code_t src_format =
+ src->type == BITS ? src->bits.format : 0;
+ const pixman_format_code_t mask_format =
+ mask && mask->type == BITS ? mask->bits.format : 0;
+ const pixman_format_code_t dest_format =
+ dest->type == BITS ? dest->bits.format : 0;
+ const int src_wide = PIXMAN_FORMAT_IS_WIDE (src_format);
+ const int mask_wide = mask && PIXMAN_FORMAT_IS_WIDE (mask_format);
+ const int dest_wide = PIXMAN_FORMAT_IS_WIDE (dest_format);
+ const int wide = src_wide || mask_wide || dest_wide;
+ const int Bpp = wide ? 8 : 4;
+ uint8_t *scanline_buffer = stack_scanline_buffer;
+ uint8_t *src_buffer, *mask_buffer, *dest_buffer;
+ fetch_scanline_t fetch_src = NULL, fetch_mask = NULL, fetch_dest = NULL;
+ pixman_combine_32_func_t compose;
+ store_scanline_t store;
+ source_image_class_t src_class, mask_class;
+ pixman_bool_t component_alpha;
+ uint32_t *bits;
+ int32_t stride;
+ int i;
+
+ if (width * Bpp > SCANLINE_BUFFER_LENGTH)
+ {
+ scanline_buffer = pixman_malloc_abc (width, 3, Bpp);
+
+ if (!scanline_buffer)
+ return;
+ }
+
+ src_buffer = scanline_buffer;
+ mask_buffer = src_buffer + width * Bpp;
+ dest_buffer = mask_buffer + width * Bpp;
+
+ src_class = _pixman_image_classify (src,
+ src_x, src_y,
+ width, height);
+
+ mask_class = SOURCE_IMAGE_CLASS_UNKNOWN;
+
+ if (mask)
+ {
+ mask_class = _pixman_image_classify (mask,
+ src_x, src_y,
+ width, height);
+ }
+
+ if (op == PIXMAN_OP_CLEAR)
+ fetch_src = NULL;
+ else if (wide)
+ fetch_src = _pixman_image_get_scanline_64;
+ else
+ fetch_src = _pixman_image_get_scanline_32;
+
+ if (!mask || op == PIXMAN_OP_CLEAR)
+ fetch_mask = NULL;
+ else if (wide)
+ fetch_mask = _pixman_image_get_scanline_64;
+ else
+ fetch_mask = _pixman_image_get_scanline_32;
+
+ if (op == PIXMAN_OP_CLEAR || op == PIXMAN_OP_SRC)
+ fetch_dest = NULL;
+ else if (wide)
+ fetch_dest = _pixman_image_get_scanline_64;
+ else
+ fetch_dest = _pixman_image_get_scanline_32;
+
+ if (wide)
+ store = _pixman_image_store_scanline_64;
+ else
+ store = _pixman_image_store_scanline_32;
+
+ /* Skip the store step and composite directly into the
+ * destination if the output format of the compose func matches
+ * the destination format.
+ *
+ * If the destination format is a8r8g8b8 then we can always do
+ * this. If it is x8r8g8b8, then we can only do it if the
+ * operator doesn't make use of destination alpha.
+ */
+ if ((dest->bits.format == PIXMAN_a8r8g8b8) ||
+ (dest->bits.format == PIXMAN_x8r8g8b8 &&
+ (op == PIXMAN_OP_OVER ||
+ op == PIXMAN_OP_ADD ||
+ op == PIXMAN_OP_SRC ||
+ op == PIXMAN_OP_CLEAR ||
+ op == PIXMAN_OP_IN_REVERSE ||
+ op == PIXMAN_OP_OUT_REVERSE ||
+ op == PIXMAN_OP_DST)))
+ {
+ if (!wide &&
+ !dest->common.alpha_map &&
+ !dest->bits.write_func)
+ {
+ store = NULL;
+ }
+ }
+
+ if (!store)
+ {
+ bits = dest->bits.bits;
+ stride = dest->bits.rowstride;
+ }
+ else
+ {
+ bits = NULL;
+ stride = 0;
+ }
+
+ component_alpha =
+ fetch_src &&
+ fetch_mask &&
+ mask &&
+ mask->common.type == BITS &&
+ mask->common.component_alpha &&
+ PIXMAN_FORMAT_RGB (mask->bits.format);
+
+ if (wide)
+ {
+ if (component_alpha)
+ compose = (pixman_combine_32_func_t)_pixman_implementation_combine_64_ca;
+ else
+ compose = (pixman_combine_32_func_t)_pixman_implementation_combine_64;
+ }
+ else
+ {
+ if (component_alpha)
+ compose = _pixman_implementation_combine_32_ca;
+ else
+ compose = _pixman_implementation_combine_32;
+ }
+
+ if (!compose)
+ return;
+
+ if (!fetch_mask)
+ mask_buffer = NULL;
+
+ for (i = 0; i < height; ++i)
+ {
+ /* fill first half of scanline with source */
+ if (fetch_src)
+ {
+ if (fetch_mask)
+ {
+ /* fetch mask before source so that fetching of
+ source can be optimized */
+ fetch_mask (mask, mask_x, mask_y + i,
+ width, (void *)mask_buffer, 0);
+
+ if (mask_class == SOURCE_IMAGE_CLASS_HORIZONTAL)
+ fetch_mask = NULL;
+ }
+
+ if (src_class == SOURCE_IMAGE_CLASS_HORIZONTAL)
+ {
+ fetch_src (src, src_x, src_y + i,
+ width, (void *)src_buffer, 0);
+ fetch_src = NULL;
+ }
+ else
+ {
+ fetch_src (src, src_x, src_y + i,
+ width, (void *)src_buffer, (void *)mask_buffer);
+ }
+ }
+ else if (fetch_mask)
+ {
+ fetch_mask (mask, mask_x, mask_y + i,
+ width, (void *)mask_buffer, 0);
+ }
+
+ if (store)
+ {
+ /* fill dest into second half of scanline */
+ if (fetch_dest)
+ {
+ fetch_dest (dest, dest_x, dest_y + i,
+ width, (void *)dest_buffer, 0);
+ }
+
+ /* blend */
+ compose (imp->toplevel, op,
+ (void *)dest_buffer,
+ (void *)src_buffer,
+ (void *)mask_buffer,
+ width);
+
+ /* write back */
+ store (&(dest->bits), dest_x, dest_y + i, width,
+ (void *)dest_buffer);
+ }
+ else
+ {
+ /* blend */
+ compose (imp->toplevel, op,
+ bits + (dest_y + i) * stride + dest_x,
+ (void *)src_buffer, (void *)mask_buffer, width);
+ }
+ }
+
+ if (scanline_buffer != stack_scanline_buffer)
+ free (scanline_buffer);
+}
+
+static const pixman_fast_path_t general_fast_path[] =
+{
+ { PIXMAN_OP_any, PIXMAN_any, 0, PIXMAN_any, 0, PIXMAN_any, 0, general_composite_rect },
+ { PIXMAN_OP_NONE }
+};
+
+static pixman_bool_t
+general_blt (pixman_implementation_t *imp,
+ uint32_t * src_bits,
+ uint32_t * dst_bits,
+ int src_stride,
+ int dst_stride,
+ int src_bpp,
+ int dst_bpp,
+ int src_x,
+ int src_y,
+ int dst_x,
+ int dst_y,
+ int width,
+ int height)
+{
+ /* We can't blit unless we have sse2 or mmx */
+
+ return FALSE;
+}
+
+static pixman_bool_t
+general_fill (pixman_implementation_t *imp,
+ uint32_t * bits,
+ int stride,
+ int bpp,
+ int x,
+ int y,
+ int width,
+ int height,
+ uint32_t xor)
+{
+ return FALSE;
+}
+
+pixman_implementation_t *
+_pixman_implementation_create_general (void)
+{
+ pixman_implementation_t *imp = _pixman_implementation_create (NULL, general_fast_path);
+
+ _pixman_setup_combiner_functions_32 (imp);
+ _pixman_setup_combiner_functions_64 (imp);
+
+ imp->blt = general_blt;
+ imp->fill = general_fill;
+
+ return imp;
+}
+
diff --git a/pixman/pixman/pixman-image.c b/pixman/pixman/pixman-image.c index 03a39db87..971859318 100644 --- a/pixman/pixman/pixman-image.c +++ b/pixman/pixman/pixman-image.c @@ -1,762 +1,773 @@ -/* - * Copyright © 2000 SuSE, Inc. - * Copyright © 2007 Red Hat, Inc. - * - * Permission to use, copy, modify, distribute, and sell this software and its - * documentation for any purpose is hereby granted without fee, provided that - * the above copyright notice appear in all copies and that both that - * copyright notice and this permission notice appear in supporting - * documentation, and that the name of SuSE not be used in advertising or - * publicity pertaining to distribution of the software without specific, - * written prior permission. SuSE makes no representations about the - * suitability of this software for any purpose. It is provided "as is" - * without express or implied warranty. - * - * SuSE DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE, INCLUDING ALL - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO EVENT SHALL SuSE - * BE LIABLE FOR ANY SPECIAL, INDIRECT OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES - * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION - * OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN - * CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. - */ - -#ifdef HAVE_CONFIG_H -#include <config.h> -#endif - -#include <stdlib.h> -#include <stdio.h> -#include <string.h> -#include <assert.h> - -#include "pixman-private.h" -#include "pixman-combine32.h" - -pixman_bool_t -_pixman_init_gradient (gradient_t * gradient, - const pixman_gradient_stop_t *stops, - int n_stops) -{ - return_val_if_fail (n_stops > 0, FALSE); - - gradient->stops = pixman_malloc_ab (n_stops, sizeof (pixman_gradient_stop_t)); - if (!gradient->stops) - return FALSE; - - memcpy (gradient->stops, stops, n_stops * sizeof (pixman_gradient_stop_t)); - - gradient->n_stops = n_stops; - - gradient->stop_range = 0xffff; - gradient->common.class = SOURCE_IMAGE_CLASS_UNKNOWN; - - return TRUE; -} - -/* - * By default, just evaluate the image at 32bpp and expand. Individual image - * types can plug in a better scanline getter if they want to. For example - * we could produce smoother gradients by evaluating them at higher color - * depth, but that's a project for the future. - */ -void -_pixman_image_get_scanline_generic_64 (pixman_image_t * image, - int x, - int y, - int width, - uint32_t * buffer, - const uint32_t * mask, - uint32_t mask_bits) -{ - uint32_t *mask8 = NULL; - - /* Contract the mask image, if one exists, so that the 32-bit fetch - * function can use it. - */ - if (mask) - { - mask8 = pixman_malloc_ab (width, sizeof(uint32_t)); - if (!mask8) - return; - - pixman_contract (mask8, (uint64_t *)mask, width); - } - - /* Fetch the source image into the first half of buffer. */ - _pixman_image_get_scanline_32 (image, x, y, width, (uint32_t*)buffer, mask8, - mask_bits); - - /* Expand from 32bpp to 64bpp in place. */ - pixman_expand ((uint64_t *)buffer, buffer, PIXMAN_a8r8g8b8, width); - - free (mask8); -} - -pixman_image_t * -_pixman_image_allocate (void) -{ - pixman_image_t *image = malloc (sizeof (pixman_image_t)); - - if (image) - { - image_common_t *common = &image->common; - - pixman_region32_init (&common->clip_region); - - common->have_clip_region = FALSE; - common->clip_sources = FALSE; - common->transform = NULL; - common->repeat = PIXMAN_REPEAT_NONE; - common->filter = PIXMAN_FILTER_NEAREST; - common->filter_params = NULL; - common->n_filter_params = 0; - common->alpha_map = NULL; - common->component_alpha = FALSE; - common->ref_count = 1; - common->classify = NULL; - common->client_clip = FALSE; - common->destroy_func = NULL; - common->destroy_data = NULL; - common->dirty = TRUE; - } - - return image; -} - -source_image_class_t -_pixman_image_classify (pixman_image_t *image, - int x, - int y, - int width, - int height) -{ - if (image->common.classify) - return image->common.classify (image, x, y, width, height); - else - return SOURCE_IMAGE_CLASS_UNKNOWN; -} - -void -_pixman_image_get_scanline_32 (pixman_image_t *image, - int x, - int y, - int width, - uint32_t * buffer, - const uint32_t *mask, - uint32_t mask_bits) -{ - image->common.get_scanline_32 (image, x, y, width, buffer, mask, mask_bits); -} - -/* Even thought the type of buffer is uint32_t *, the function actually expects - * a uint64_t *buffer. - */ -void -_pixman_image_get_scanline_64 (pixman_image_t *image, - int x, - int y, - int width, - uint32_t * buffer, - const uint32_t *unused, - uint32_t unused2) -{ - image->common.get_scanline_64 (image, x, y, width, buffer, unused, unused2); -} - -static void -image_property_changed (pixman_image_t *image) -{ - image->common.dirty = TRUE; -} - -/* Ref Counting */ -PIXMAN_EXPORT pixman_image_t * -pixman_image_ref (pixman_image_t *image) -{ - image->common.ref_count++; - - return image; -} - -/* returns TRUE when the image is freed */ -PIXMAN_EXPORT pixman_bool_t -pixman_image_unref (pixman_image_t *image) -{ - image_common_t *common = (image_common_t *)image; - - common->ref_count--; - - if (common->ref_count == 0) - { - if (image->common.destroy_func) - image->common.destroy_func (image, image->common.destroy_data); - - pixman_region32_fini (&common->clip_region); - - if (common->transform) - free (common->transform); - - if (common->filter_params) - free (common->filter_params); - - if (common->alpha_map) - pixman_image_unref ((pixman_image_t *)common->alpha_map); - - if (image->type == LINEAR || - image->type == RADIAL || - image->type == CONICAL) - { - if (image->gradient.stops) - free (image->gradient.stops); - } - - if (image->type == BITS && image->bits.free_me) - free (image->bits.free_me); - - free (image); - - return TRUE; - } - - return FALSE; -} - -PIXMAN_EXPORT void -pixman_image_set_destroy_function (pixman_image_t * image, - pixman_image_destroy_func_t func, - void * data) -{ - image->common.destroy_func = func; - image->common.destroy_data = data; -} - -PIXMAN_EXPORT void * -pixman_image_get_destroy_data (pixman_image_t *image) -{ - return image->common.destroy_data; -} - -void -_pixman_image_reset_clip_region (pixman_image_t *image) -{ - image->common.have_clip_region = FALSE; -} - -static pixman_bool_t out_of_bounds_workaround = TRUE; - -/* Old X servers rely on out-of-bounds accesses when they are asked - * to composite with a window as the source. They create a pixman image - * pointing to some bogus position in memory, but then they set a clip - * region to the position where the actual bits are. - * - * Due to a bug in old versions of pixman, where it would not clip - * against the image bounds when a clip region was set, this would - * actually work. So by default we allow certain out-of-bound access - * to happen unless explicitly disabled. - * - * Fixed X servers should call this function to disable the workaround. - */ -PIXMAN_EXPORT void -pixman_disable_out_of_bounds_workaround (void) -{ - out_of_bounds_workaround = FALSE; -} - -static pixman_bool_t -source_image_needs_out_of_bounds_workaround (bits_image_t *image) -{ - if (image->common.clip_sources && - image->common.repeat == PIXMAN_REPEAT_NONE && - image->common.have_clip_region && - out_of_bounds_workaround) - { - if (!image->common.client_clip) - { - /* There is no client clip, so if the clip region extends beyond the - * drawable geometry, it must be because the X server generated the - * bogus clip region. - */ - const pixman_box32_t *extents = - pixman_region32_extents (&image->common.clip_region); - - if (extents->x1 >= 0 && extents->x2 <= image->width && - extents->y1 >= 0 && extents->y2 <= image->height) - { - return FALSE; - } - } - - return TRUE; - } - - return FALSE; -} - -static void -compute_image_info (pixman_image_t *image) -{ - pixman_format_code_t code; - uint32_t flags = 0; - - /* Transform */ - if (!image->common.transform) - { - flags |= (FAST_PATH_ID_TRANSFORM | FAST_PATH_X_UNIT_POSITIVE); - } - else - { - if (image->common.transform->matrix[0][1] == 0 && - image->common.transform->matrix[1][0] == 0 && - image->common.transform->matrix[2][0] == 0 && - image->common.transform->matrix[2][1] == 0 && - image->common.transform->matrix[2][2] == pixman_fixed_1) - { - flags |= FAST_PATH_SCALE_TRANSFORM; - } - - if (image->common.transform->matrix[0][0] > 0) - flags |= FAST_PATH_X_UNIT_POSITIVE; - } - - /* Alpha map */ - if (!image->common.alpha_map) - flags |= FAST_PATH_NO_ALPHA_MAP; - - /* Filter */ - switch (image->common.filter) - { - case PIXMAN_FILTER_NEAREST: - case PIXMAN_FILTER_FAST: - flags |= (FAST_PATH_NEAREST_FILTER | FAST_PATH_NO_CONVOLUTION_FILTER); - break; - - case PIXMAN_FILTER_CONVOLUTION: - break; - - default: - flags |= FAST_PATH_NO_CONVOLUTION_FILTER; - break; - } - - /* Repeat mode */ - switch (image->common.repeat) - { - case PIXMAN_REPEAT_NONE: - flags |= FAST_PATH_NO_REFLECT_REPEAT | FAST_PATH_NO_PAD_REPEAT; - break; - - case PIXMAN_REPEAT_REFLECT: - flags |= FAST_PATH_NO_PAD_REPEAT | FAST_PATH_NO_NONE_REPEAT; - break; - - case PIXMAN_REPEAT_PAD: - flags |= FAST_PATH_NO_REFLECT_REPEAT | FAST_PATH_NO_NONE_REPEAT; - break; - - default: - flags |= FAST_PATH_NO_REFLECT_REPEAT | FAST_PATH_NO_PAD_REPEAT | FAST_PATH_NO_NONE_REPEAT; - break; - } - - /* Component alpha */ - if (image->common.component_alpha) - flags |= FAST_PATH_COMPONENT_ALPHA; - else - flags |= FAST_PATH_UNIFIED_ALPHA; - - flags |= (FAST_PATH_NO_ACCESSORS | FAST_PATH_NO_WIDE_FORMAT); - - /* Type specific checks */ - switch (image->type) - { - case SOLID: - code = PIXMAN_solid; - - if (image->solid.color.alpha == 0xffff) - flags |= FAST_PATH_IS_OPAQUE; - break; - - case BITS: - if (image->bits.width == 1 && - image->bits.height == 1 && - image->common.repeat != PIXMAN_REPEAT_NONE) - { - code = PIXMAN_solid; - } - else - { - code = image->bits.format; - - if (!image->common.transform && - image->common.repeat == PIXMAN_REPEAT_NORMAL) - { - flags |= FAST_PATH_SIMPLE_REPEAT; - } - } - - if (image->common.repeat != PIXMAN_REPEAT_NONE && - !PIXMAN_FORMAT_A (image->bits.format) && - PIXMAN_FORMAT_TYPE (image->bits.format) != PIXMAN_TYPE_GRAY && - PIXMAN_FORMAT_TYPE (image->bits.format) != PIXMAN_TYPE_COLOR) - { - flags |= FAST_PATH_IS_OPAQUE; - } - - if (source_image_needs_out_of_bounds_workaround (&image->bits)) - flags |= FAST_PATH_NEEDS_WORKAROUND; - - if (image->bits.read_func || image->bits.write_func) - flags &= ~FAST_PATH_NO_ACCESSORS; - - if (PIXMAN_FORMAT_IS_WIDE (image->bits.format)) - flags &= ~FAST_PATH_NO_WIDE_FORMAT; - break; - - case LINEAR: - case RADIAL: - code = PIXMAN_unknown; - - if (image->common.repeat != PIXMAN_REPEAT_NONE) - { - int i; - - flags |= FAST_PATH_IS_OPAQUE; - for (i = 0; i < image->gradient.n_stops; ++i) - { - if (image->gradient.stops[i].color.alpha != 0xffff) - { - flags &= ~FAST_PATH_IS_OPAQUE; - break; - } - } - } - break; - - default: - code = PIXMAN_unknown; - break; - } - - /* Both alpha maps and convolution filters can introduce - * non-opaqueness in otherwise opaque images. Also - * an image with component alpha turned on is only opaque - * if all channels are opaque, so we simply turn it off - * unconditionally for those images. - */ - if (image->common.alpha_map || - image->common.filter == PIXMAN_FILTER_CONVOLUTION || - image->common.component_alpha) - { - flags &= ~FAST_PATH_IS_OPAQUE; - } - - image->common.flags = flags; - image->common.extended_format_code = code; -} - -void -_pixman_image_validate (pixman_image_t *image) -{ - if (image->common.dirty) - { - compute_image_info (image); - - /* It is important that property_changed is - * called *after* compute_image_info() because - * property_changed() can make use of the flags - * to set up accessors etc. - */ - image->common.property_changed (image); - - image->common.dirty = FALSE; - } - - if (image->common.alpha_map) - _pixman_image_validate ((pixman_image_t *)image->common.alpha_map); -} - -PIXMAN_EXPORT pixman_bool_t -pixman_image_set_clip_region32 (pixman_image_t * image, - pixman_region32_t *region) -{ - image_common_t *common = (image_common_t *)image; - pixman_bool_t result; - - if (region) - { - if ((result = pixman_region32_copy (&common->clip_region, region))) - image->common.have_clip_region = TRUE; - } - else - { - _pixman_image_reset_clip_region (image); - - result = TRUE; - } - - image_property_changed (image); - - return result; -} - -PIXMAN_EXPORT pixman_bool_t -pixman_image_set_clip_region (pixman_image_t * image, - pixman_region16_t *region) -{ - image_common_t *common = (image_common_t *)image; - pixman_bool_t result; - - if (region) - { - if ((result = pixman_region32_copy_from_region16 (&common->clip_region, region))) - image->common.have_clip_region = TRUE; - } - else - { - _pixman_image_reset_clip_region (image); - - result = TRUE; - } - - image_property_changed (image); - - return result; -} - -PIXMAN_EXPORT void -pixman_image_set_has_client_clip (pixman_image_t *image, - pixman_bool_t client_clip) -{ - image->common.client_clip = client_clip; -} - -PIXMAN_EXPORT pixman_bool_t -pixman_image_set_transform (pixman_image_t * image, - const pixman_transform_t *transform) -{ - static const pixman_transform_t id = - { - { { pixman_fixed_1, 0, 0 }, - { 0, pixman_fixed_1, 0 }, - { 0, 0, pixman_fixed_1 } } - }; - - image_common_t *common = (image_common_t *)image; - pixman_bool_t result; - - if (common->transform == transform) - return TRUE; - - if (memcmp (&id, transform, sizeof (pixman_transform_t)) == 0) - { - free (common->transform); - common->transform = NULL; - result = TRUE; - - goto out; - } - - if (common->transform == NULL) - common->transform = malloc (sizeof (pixman_transform_t)); - - if (common->transform == NULL) - { - result = FALSE; - - goto out; - } - - memcpy (common->transform, transform, sizeof(pixman_transform_t)); - - result = TRUE; - -out: - image_property_changed (image); - - return result; -} - -PIXMAN_EXPORT void -pixman_image_set_repeat (pixman_image_t *image, - pixman_repeat_t repeat) -{ - image->common.repeat = repeat; - - image_property_changed (image); -} - -PIXMAN_EXPORT pixman_bool_t -pixman_image_set_filter (pixman_image_t * image, - pixman_filter_t filter, - const pixman_fixed_t *params, - int n_params) -{ - image_common_t *common = (image_common_t *)image; - pixman_fixed_t *new_params; - - if (params == common->filter_params && filter == common->filter) - return TRUE; - - new_params = NULL; - if (params) - { - new_params = pixman_malloc_ab (n_params, sizeof (pixman_fixed_t)); - if (!new_params) - return FALSE; - - memcpy (new_params, - params, n_params * sizeof (pixman_fixed_t)); - } - - common->filter = filter; - - if (common->filter_params) - free (common->filter_params); - - common->filter_params = new_params; - common->n_filter_params = n_params; - - image_property_changed (image); - return TRUE; -} - -PIXMAN_EXPORT void -pixman_image_set_source_clipping (pixman_image_t *image, - pixman_bool_t clip_sources) -{ - image->common.clip_sources = clip_sources; - - image_property_changed (image); -} - -/* Unlike all the other property setters, this function does not - * copy the content of indexed. Doing this copying is simply - * way, way too expensive. - */ -PIXMAN_EXPORT void -pixman_image_set_indexed (pixman_image_t * image, - const pixman_indexed_t *indexed) -{ - bits_image_t *bits = (bits_image_t *)image; - - bits->indexed = indexed; - - image_property_changed (image); -} - -PIXMAN_EXPORT void -pixman_image_set_alpha_map (pixman_image_t *image, - pixman_image_t *alpha_map, - int16_t x, - int16_t y) -{ - image_common_t *common = (image_common_t *)image; - - return_if_fail (!alpha_map || alpha_map->type == BITS); - - if (common->alpha_map != (bits_image_t *)alpha_map) - { - if (common->alpha_map) - pixman_image_unref ((pixman_image_t *)common->alpha_map); - - if (alpha_map) - common->alpha_map = (bits_image_t *)pixman_image_ref (alpha_map); - else - common->alpha_map = NULL; - } - - common->alpha_origin_x = x; - common->alpha_origin_y = y; - - image_property_changed (image); -} - -PIXMAN_EXPORT void -pixman_image_set_component_alpha (pixman_image_t *image, - pixman_bool_t component_alpha) -{ - image->common.component_alpha = component_alpha; - - image_property_changed (image); -} - -PIXMAN_EXPORT void -pixman_image_set_accessors (pixman_image_t * image, - pixman_read_memory_func_t read_func, - pixman_write_memory_func_t write_func) -{ - return_if_fail (image != NULL); - - if (image->type == BITS) - { - image->bits.read_func = read_func; - image->bits.write_func = write_func; - - image_property_changed (image); - } -} - -PIXMAN_EXPORT uint32_t * -pixman_image_get_data (pixman_image_t *image) -{ - if (image->type == BITS) - return image->bits.bits; - - return NULL; -} - -PIXMAN_EXPORT int -pixman_image_get_width (pixman_image_t *image) -{ - if (image->type == BITS) - return image->bits.width; - - return 0; -} - -PIXMAN_EXPORT int -pixman_image_get_height (pixman_image_t *image) -{ - if (image->type == BITS) - return image->bits.height; - - return 0; -} - -PIXMAN_EXPORT int -pixman_image_get_stride (pixman_image_t *image) -{ - if (image->type == BITS) - return image->bits.rowstride * (int) sizeof (uint32_t); - - return 0; -} - -PIXMAN_EXPORT int -pixman_image_get_depth (pixman_image_t *image) -{ - if (image->type == BITS) - return PIXMAN_FORMAT_DEPTH (image->bits.format); - - return 0; -} - -uint32_t -_pixman_image_get_solid (pixman_image_t * image, - pixman_format_code_t format) -{ - uint32_t result; - - _pixman_image_get_scanline_32 (image, 0, 0, 1, &result, NULL, 0); - - /* If necessary, convert RGB <--> BGR. */ - if (PIXMAN_FORMAT_TYPE (format) != PIXMAN_TYPE_ARGB) - { - result = (((result & 0xff000000) >> 0) | - ((result & 0x00ff0000) >> 16) | - ((result & 0x0000ff00) >> 0) | - ((result & 0x000000ff) << 16)); - } - - return result; -} +/*
+ * Copyright © 2000 SuSE, Inc.
+ * Copyright © 2007 Red Hat, Inc.
+ *
+ * Permission to use, copy, modify, distribute, and sell this software and its
+ * documentation for any purpose is hereby granted without fee, provided that
+ * the above copyright notice appear in all copies and that both that
+ * copyright notice and this permission notice appear in supporting
+ * documentation, and that the name of SuSE not be used in advertising or
+ * publicity pertaining to distribution of the software without specific,
+ * written prior permission. SuSE makes no representations about the
+ * suitability of this software for any purpose. It is provided "as is"
+ * without express or implied warranty.
+ *
+ * SuSE DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE, INCLUDING ALL
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO EVENT SHALL SuSE
+ * BE LIABLE FOR ANY SPECIAL, INDIRECT OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION
+ * OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN
+ * CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+
+#ifdef HAVE_CONFIG_H
+#include <config.h>
+#endif
+
+#include <stdlib.h>
+#include <stdio.h>
+#include <string.h>
+#include <assert.h>
+
+#include "pixman-private.h"
+#include "pixman-combine32.h"
+
+pixman_bool_t
+_pixman_init_gradient (gradient_t * gradient,
+ const pixman_gradient_stop_t *stops,
+ int n_stops)
+{
+ return_val_if_fail (n_stops > 0, FALSE);
+
+ gradient->stops = pixman_malloc_ab (n_stops, sizeof (pixman_gradient_stop_t));
+ if (!gradient->stops)
+ return FALSE;
+
+ memcpy (gradient->stops, stops, n_stops * sizeof (pixman_gradient_stop_t));
+
+ gradient->n_stops = n_stops;
+
+ gradient->stop_range = 0xffff;
+ gradient->common.class = SOURCE_IMAGE_CLASS_UNKNOWN;
+
+ return TRUE;
+}
+
+/*
+ * By default, just evaluate the image at 32bpp and expand. Individual image
+ * types can plug in a better scanline getter if they want to. For example
+ * we could produce smoother gradients by evaluating them at higher color
+ * depth, but that's a project for the future.
+ */
+void
+_pixman_image_get_scanline_generic_64 (pixman_image_t * image,
+ int x,
+ int y,
+ int width,
+ uint32_t * buffer,
+ const uint32_t * mask)
+{
+ uint32_t *mask8 = NULL;
+
+ /* Contract the mask image, if one exists, so that the 32-bit fetch
+ * function can use it.
+ */
+ if (mask)
+ {
+ mask8 = pixman_malloc_ab (width, sizeof(uint32_t));
+ if (!mask8)
+ return;
+
+ pixman_contract (mask8, (uint64_t *)mask, width);
+ }
+
+ /* Fetch the source image into the first half of buffer. */
+ _pixman_image_get_scanline_32 (image, x, y, width, (uint32_t*)buffer, mask8);
+
+ /* Expand from 32bpp to 64bpp in place. */
+ pixman_expand ((uint64_t *)buffer, buffer, PIXMAN_a8r8g8b8, width);
+
+ free (mask8);
+}
+
+pixman_image_t *
+_pixman_image_allocate (void)
+{
+ pixman_image_t *image = malloc (sizeof (pixman_image_t));
+
+ if (image)
+ {
+ image_common_t *common = &image->common;
+
+ pixman_region32_init (&common->clip_region);
+
+ common->have_clip_region = FALSE;
+ common->clip_sources = FALSE;
+ common->transform = NULL;
+ common->repeat = PIXMAN_REPEAT_NONE;
+ common->filter = PIXMAN_FILTER_NEAREST;
+ common->filter_params = NULL;
+ common->n_filter_params = 0;
+ common->alpha_map = NULL;
+ common->component_alpha = FALSE;
+ common->ref_count = 1;
+ common->classify = NULL;
+ common->client_clip = FALSE;
+ common->destroy_func = NULL;
+ common->destroy_data = NULL;
+ common->dirty = TRUE;
+ }
+
+ return image;
+}
+
+source_image_class_t
+_pixman_image_classify (pixman_image_t *image,
+ int x,
+ int y,
+ int width,
+ int height)
+{
+ if (image->common.classify)
+ return image->common.classify (image, x, y, width, height);
+ else
+ return SOURCE_IMAGE_CLASS_UNKNOWN;
+}
+
+void
+_pixman_image_get_scanline_32 (pixman_image_t *image,
+ int x,
+ int y,
+ int width,
+ uint32_t * buffer,
+ const uint32_t *mask)
+{
+ image->common.get_scanline_32 (image, x, y, width, buffer, mask);
+}
+
+/* Even thought the type of buffer is uint32_t *, the function actually expects
+ * a uint64_t *buffer.
+ */
+void
+_pixman_image_get_scanline_64 (pixman_image_t *image,
+ int x,
+ int y,
+ int width,
+ uint32_t * buffer,
+ const uint32_t *unused)
+{
+ image->common.get_scanline_64 (image, x, y, width, buffer, unused);
+}
+
+static void
+image_property_changed (pixman_image_t *image)
+{
+ image->common.dirty = TRUE;
+}
+
+/* Ref Counting */
+PIXMAN_EXPORT pixman_image_t *
+pixman_image_ref (pixman_image_t *image)
+{
+ image->common.ref_count++;
+
+ return image;
+}
+
+/* returns TRUE when the image is freed */
+PIXMAN_EXPORT pixman_bool_t
+pixman_image_unref (pixman_image_t *image)
+{
+ image_common_t *common = (image_common_t *)image;
+
+ common->ref_count--;
+
+ if (common->ref_count == 0)
+ {
+ if (image->common.destroy_func)
+ image->common.destroy_func (image, image->common.destroy_data);
+
+ pixman_region32_fini (&common->clip_region);
+
+ if (common->transform)
+ free (common->transform);
+
+ if (common->filter_params)
+ free (common->filter_params);
+
+ if (common->alpha_map)
+ pixman_image_unref ((pixman_image_t *)common->alpha_map);
+
+ if (image->type == LINEAR ||
+ image->type == RADIAL ||
+ image->type == CONICAL)
+ {
+ if (image->gradient.stops)
+ free (image->gradient.stops);
+ }
+
+ if (image->type == BITS && image->bits.free_me)
+ free (image->bits.free_me);
+
+ free (image);
+
+ return TRUE;
+ }
+
+ return FALSE;
+}
+
+PIXMAN_EXPORT void
+pixman_image_set_destroy_function (pixman_image_t * image,
+ pixman_image_destroy_func_t func,
+ void * data)
+{
+ image->common.destroy_func = func;
+ image->common.destroy_data = data;
+}
+
+PIXMAN_EXPORT void *
+pixman_image_get_destroy_data (pixman_image_t *image)
+{
+ return image->common.destroy_data;
+}
+
+void
+_pixman_image_reset_clip_region (pixman_image_t *image)
+{
+ image->common.have_clip_region = FALSE;
+}
+
+static pixman_bool_t out_of_bounds_workaround = TRUE;
+
+/* Old X servers rely on out-of-bounds accesses when they are asked
+ * to composite with a window as the source. They create a pixman image
+ * pointing to some bogus position in memory, but then they set a clip
+ * region to the position where the actual bits are.
+ *
+ * Due to a bug in old versions of pixman, where it would not clip
+ * against the image bounds when a clip region was set, this would
+ * actually work. So by default we allow certain out-of-bound access
+ * to happen unless explicitly disabled.
+ *
+ * Fixed X servers should call this function to disable the workaround.
+ */
+PIXMAN_EXPORT void
+pixman_disable_out_of_bounds_workaround (void)
+{
+ out_of_bounds_workaround = FALSE;
+}
+
+static pixman_bool_t
+source_image_needs_out_of_bounds_workaround (bits_image_t *image)
+{
+ if (image->common.clip_sources &&
+ image->common.repeat == PIXMAN_REPEAT_NONE &&
+ image->common.have_clip_region &&
+ out_of_bounds_workaround)
+ {
+ if (!image->common.client_clip)
+ {
+ /* There is no client clip, so if the clip region extends beyond the
+ * drawable geometry, it must be because the X server generated the
+ * bogus clip region.
+ */
+ const pixman_box32_t *extents =
+ pixman_region32_extents (&image->common.clip_region);
+
+ if (extents->x1 >= 0 && extents->x2 <= image->width &&
+ extents->y1 >= 0 && extents->y2 <= image->height)
+ {
+ return FALSE;
+ }
+ }
+
+ return TRUE;
+ }
+
+ return FALSE;
+}
+
+static void
+compute_image_info (pixman_image_t *image)
+{
+ pixman_format_code_t code;
+ uint32_t flags = 0;
+
+ /* Transform */
+ if (!image->common.transform)
+ {
+ flags |= (FAST_PATH_ID_TRANSFORM | FAST_PATH_X_UNIT_POSITIVE);
+ }
+ else
+ {
+ if (image->common.transform->matrix[0][1] == 0 &&
+ image->common.transform->matrix[1][0] == 0 &&
+ image->common.transform->matrix[2][0] == 0 &&
+ image->common.transform->matrix[2][1] == 0 &&
+ image->common.transform->matrix[2][2] == pixman_fixed_1)
+ {
+ flags |= FAST_PATH_SCALE_TRANSFORM;
+ }
+
+ if (image->common.transform->matrix[0][0] > 0)
+ flags |= FAST_PATH_X_UNIT_POSITIVE;
+ }
+
+ /* Alpha map */
+ if (!image->common.alpha_map)
+ flags |= FAST_PATH_NO_ALPHA_MAP;
+
+ /* Filter */
+ switch (image->common.filter)
+ {
+ case PIXMAN_FILTER_NEAREST:
+ case PIXMAN_FILTER_FAST:
+ flags |= (FAST_PATH_NEAREST_FILTER | FAST_PATH_NO_CONVOLUTION_FILTER);
+ break;
+
+ case PIXMAN_FILTER_CONVOLUTION:
+ break;
+
+ default:
+ flags |= FAST_PATH_NO_CONVOLUTION_FILTER;
+ break;
+ }
+
+ /* Repeat mode */
+ switch (image->common.repeat)
+ {
+ case PIXMAN_REPEAT_NONE:
+ flags |= FAST_PATH_NO_REFLECT_REPEAT | FAST_PATH_NO_PAD_REPEAT;
+ break;
+
+ case PIXMAN_REPEAT_REFLECT:
+ flags |= FAST_PATH_NO_PAD_REPEAT | FAST_PATH_NO_NONE_REPEAT;
+ break;
+
+ case PIXMAN_REPEAT_PAD:
+ flags |= FAST_PATH_NO_REFLECT_REPEAT | FAST_PATH_NO_NONE_REPEAT;
+ break;
+
+ default:
+ flags |= FAST_PATH_NO_REFLECT_REPEAT | FAST_PATH_NO_PAD_REPEAT | FAST_PATH_NO_NONE_REPEAT;
+ break;
+ }
+
+ /* Component alpha */
+ if (image->common.component_alpha)
+ flags |= FAST_PATH_COMPONENT_ALPHA;
+ else
+ flags |= FAST_PATH_UNIFIED_ALPHA;
+
+ flags |= (FAST_PATH_NO_ACCESSORS | FAST_PATH_NO_WIDE_FORMAT);
+
+ /* Type specific checks */
+ switch (image->type)
+ {
+ case SOLID:
+ code = PIXMAN_solid;
+
+ if (image->solid.color.alpha == 0xffff)
+ flags |= FAST_PATH_IS_OPAQUE;
+ break;
+
+ case BITS:
+ if (image->bits.width == 1 &&
+ image->bits.height == 1 &&
+ image->common.repeat != PIXMAN_REPEAT_NONE)
+ {
+ code = PIXMAN_solid;
+ }
+ else
+ {
+ code = image->bits.format;
+
+ if (!image->common.transform &&
+ image->common.repeat == PIXMAN_REPEAT_NORMAL)
+ {
+ flags |= FAST_PATH_SIMPLE_REPEAT;
+ }
+ }
+
+ if (image->common.repeat != PIXMAN_REPEAT_NONE &&
+ !PIXMAN_FORMAT_A (image->bits.format) &&
+ PIXMAN_FORMAT_TYPE (image->bits.format) != PIXMAN_TYPE_GRAY &&
+ PIXMAN_FORMAT_TYPE (image->bits.format) != PIXMAN_TYPE_COLOR)
+ {
+ flags |= FAST_PATH_IS_OPAQUE;
+ }
+
+ if (source_image_needs_out_of_bounds_workaround (&image->bits))
+ flags |= FAST_PATH_NEEDS_WORKAROUND;
+
+ if (image->bits.read_func || image->bits.write_func)
+ flags &= ~FAST_PATH_NO_ACCESSORS;
+
+ if (PIXMAN_FORMAT_IS_WIDE (image->bits.format))
+ flags &= ~FAST_PATH_NO_WIDE_FORMAT;
+ break;
+
+ case LINEAR:
+ case RADIAL:
+ code = PIXMAN_unknown;
+
+ if (image->common.repeat != PIXMAN_REPEAT_NONE)
+ {
+ int i;
+
+ flags |= FAST_PATH_IS_OPAQUE;
+ for (i = 0; i < image->gradient.n_stops; ++i)
+ {
+ if (image->gradient.stops[i].color.alpha != 0xffff)
+ {
+ flags &= ~FAST_PATH_IS_OPAQUE;
+ break;
+ }
+ }
+ }
+ break;
+
+ default:
+ code = PIXMAN_unknown;
+ break;
+ }
+
+ /* Both alpha maps and convolution filters can introduce
+ * non-opaqueness in otherwise opaque images. Also
+ * an image with component alpha turned on is only opaque
+ * if all channels are opaque, so we simply turn it off
+ * unconditionally for those images.
+ */
+ if (image->common.alpha_map ||
+ image->common.filter == PIXMAN_FILTER_CONVOLUTION ||
+ image->common.component_alpha)
+ {
+ flags &= ~FAST_PATH_IS_OPAQUE;
+ }
+
+ image->common.flags = flags;
+ image->common.extended_format_code = code;
+}
+
+void
+_pixman_image_validate (pixman_image_t *image)
+{
+ if (image->common.dirty)
+ {
+ compute_image_info (image);
+
+ /* It is important that property_changed is
+ * called *after* compute_image_info() because
+ * property_changed() can make use of the flags
+ * to set up accessors etc.
+ */
+ image->common.property_changed (image);
+
+ image->common.dirty = FALSE;
+ }
+
+ if (image->common.alpha_map)
+ _pixman_image_validate ((pixman_image_t *)image->common.alpha_map);
+}
+
+PIXMAN_EXPORT pixman_bool_t
+pixman_image_set_clip_region32 (pixman_image_t * image,
+ pixman_region32_t *region)
+{
+ image_common_t *common = (image_common_t *)image;
+ pixman_bool_t result;
+
+ if (region)
+ {
+ if ((result = pixman_region32_copy (&common->clip_region, region)))
+ image->common.have_clip_region = TRUE;
+ }
+ else
+ {
+ _pixman_image_reset_clip_region (image);
+
+ result = TRUE;
+ }
+
+ image_property_changed (image);
+
+ return result;
+}
+
+PIXMAN_EXPORT pixman_bool_t
+pixman_image_set_clip_region (pixman_image_t * image,
+ pixman_region16_t *region)
+{
+ image_common_t *common = (image_common_t *)image;
+ pixman_bool_t result;
+
+ if (region)
+ {
+ if ((result = pixman_region32_copy_from_region16 (&common->clip_region, region)))
+ image->common.have_clip_region = TRUE;
+ }
+ else
+ {
+ _pixman_image_reset_clip_region (image);
+
+ result = TRUE;
+ }
+
+ image_property_changed (image);
+
+ return result;
+}
+
+PIXMAN_EXPORT void
+pixman_image_set_has_client_clip (pixman_image_t *image,
+ pixman_bool_t client_clip)
+{
+ image->common.client_clip = client_clip;
+}
+
+PIXMAN_EXPORT pixman_bool_t
+pixman_image_set_transform (pixman_image_t * image,
+ const pixman_transform_t *transform)
+{
+ static const pixman_transform_t id =
+ {
+ { { pixman_fixed_1, 0, 0 },
+ { 0, pixman_fixed_1, 0 },
+ { 0, 0, pixman_fixed_1 } }
+ };
+
+ image_common_t *common = (image_common_t *)image;
+ pixman_bool_t result;
+
+ if (common->transform == transform)
+ return TRUE;
+
+ if (memcmp (&id, transform, sizeof (pixman_transform_t)) == 0)
+ {
+ free (common->transform);
+ common->transform = NULL;
+ result = TRUE;
+
+ goto out;
+ }
+
+ if (common->transform == NULL)
+ common->transform = malloc (sizeof (pixman_transform_t));
+
+ if (common->transform == NULL)
+ {
+ result = FALSE;
+
+ goto out;
+ }
+
+ memcpy (common->transform, transform, sizeof(pixman_transform_t));
+
+ result = TRUE;
+
+out:
+ image_property_changed (image);
+
+ return result;
+}
+
+PIXMAN_EXPORT void
+pixman_image_set_repeat (pixman_image_t *image,
+ pixman_repeat_t repeat)
+{
+ image->common.repeat = repeat;
+
+ image_property_changed (image);
+}
+
+PIXMAN_EXPORT pixman_bool_t
+pixman_image_set_filter (pixman_image_t * image,
+ pixman_filter_t filter,
+ const pixman_fixed_t *params,
+ int n_params)
+{
+ image_common_t *common = (image_common_t *)image;
+ pixman_fixed_t *new_params;
+
+ if (params == common->filter_params && filter == common->filter)
+ return TRUE;
+
+ new_params = NULL;
+ if (params)
+ {
+ new_params = pixman_malloc_ab (n_params, sizeof (pixman_fixed_t));
+ if (!new_params)
+ return FALSE;
+
+ memcpy (new_params,
+ params, n_params * sizeof (pixman_fixed_t));
+ }
+
+ common->filter = filter;
+
+ if (common->filter_params)
+ free (common->filter_params);
+
+ common->filter_params = new_params;
+ common->n_filter_params = n_params;
+
+ image_property_changed (image);
+ return TRUE;
+}
+
+PIXMAN_EXPORT void
+pixman_image_set_source_clipping (pixman_image_t *image,
+ pixman_bool_t clip_sources)
+{
+ image->common.clip_sources = clip_sources;
+
+ image_property_changed (image);
+}
+
+/* Unlike all the other property setters, this function does not
+ * copy the content of indexed. Doing this copying is simply
+ * way, way too expensive.
+ */
+PIXMAN_EXPORT void
+pixman_image_set_indexed (pixman_image_t * image,
+ const pixman_indexed_t *indexed)
+{
+ bits_image_t *bits = (bits_image_t *)image;
+
+ bits->indexed = indexed;
+
+ image_property_changed (image);
+}
+
+PIXMAN_EXPORT void
+pixman_image_set_alpha_map (pixman_image_t *image,
+ pixman_image_t *alpha_map,
+ int16_t x,
+ int16_t y)
+{
+ image_common_t *common = (image_common_t *)image;
+
+ return_if_fail (!alpha_map || alpha_map->type == BITS);
+
+ if (common->alpha_map != (bits_image_t *)alpha_map)
+ {
+ if (common->alpha_map)
+ pixman_image_unref ((pixman_image_t *)common->alpha_map);
+
+ if (alpha_map)
+ common->alpha_map = (bits_image_t *)pixman_image_ref (alpha_map);
+ else
+ common->alpha_map = NULL;
+ }
+
+ common->alpha_origin_x = x;
+ common->alpha_origin_y = y;
+
+ image_property_changed (image);
+}
+
+PIXMAN_EXPORT void
+pixman_image_set_component_alpha (pixman_image_t *image,
+ pixman_bool_t component_alpha)
+{
+ image->common.component_alpha = component_alpha;
+
+ image_property_changed (image);
+}
+
+PIXMAN_EXPORT pixman_bool_t
+pixman_image_get_component_alpha (pixman_image_t *image)
+{
+ return image->common.component_alpha;
+}
+
+PIXMAN_EXPORT void
+pixman_image_set_accessors (pixman_image_t * image,
+ pixman_read_memory_func_t read_func,
+ pixman_write_memory_func_t write_func)
+{
+ return_if_fail (image != NULL);
+
+ if (image->type == BITS)
+ {
+ image->bits.read_func = read_func;
+ image->bits.write_func = write_func;
+
+ image_property_changed (image);
+ }
+}
+
+PIXMAN_EXPORT uint32_t *
+pixman_image_get_data (pixman_image_t *image)
+{
+ if (image->type == BITS)
+ return image->bits.bits;
+
+ return NULL;
+}
+
+PIXMAN_EXPORT int
+pixman_image_get_width (pixman_image_t *image)
+{
+ if (image->type == BITS)
+ return image->bits.width;
+
+ return 0;
+}
+
+PIXMAN_EXPORT int
+pixman_image_get_height (pixman_image_t *image)
+{
+ if (image->type == BITS)
+ return image->bits.height;
+
+ return 0;
+}
+
+PIXMAN_EXPORT int
+pixman_image_get_stride (pixman_image_t *image)
+{
+ if (image->type == BITS)
+ return image->bits.rowstride * (int) sizeof (uint32_t);
+
+ return 0;
+}
+
+PIXMAN_EXPORT int
+pixman_image_get_depth (pixman_image_t *image)
+{
+ if (image->type == BITS)
+ return PIXMAN_FORMAT_DEPTH (image->bits.format);
+
+ return 0;
+}
+
+PIXMAN_EXPORT pixman_format_code_t
+pixman_image_get_format (pixman_image_t *image)
+{
+ if (image->type == BITS)
+ return image->bits.format;
+
+ return 0;
+}
+
+uint32_t
+_pixman_image_get_solid (pixman_image_t * image,
+ pixman_format_code_t format)
+{
+ uint32_t result;
+
+ _pixman_image_get_scanline_32 (image, 0, 0, 1, &result, NULL);
+
+ /* If necessary, convert RGB <--> BGR. */
+ if (PIXMAN_FORMAT_TYPE (format) != PIXMAN_TYPE_ARGB)
+ {
+ result = (((result & 0xff000000) >> 0) |
+ ((result & 0x00ff0000) >> 16) |
+ ((result & 0x0000ff00) >> 0) |
+ ((result & 0x000000ff) << 16));
+ }
+
+ return result;
+}
diff --git a/pixman/pixman/pixman-linear-gradient.c b/pixman/pixman/pixman-linear-gradient.c index d9409fe50..20a8b7827 100644 --- a/pixman/pixman/pixman-linear-gradient.c +++ b/pixman/pixman/pixman-linear-gradient.c @@ -1,294 +1,291 @@ -/* - * Copyright © 2000 SuSE, Inc. - * Copyright © 2007 Red Hat, Inc. - * Copyright © 2000 Keith Packard, member of The XFree86 Project, Inc. - * 2005 Lars Knoll & Zack Rusin, Trolltech - * - * Permission to use, copy, modify, distribute, and sell this software and its - * documentation for any purpose is hereby granted without fee, provided that - * the above copyright notice appear in all copies and that both that - * copyright notice and this permission notice appear in supporting - * documentation, and that the name of Keith Packard not be used in - * advertising or publicity pertaining to distribution of the software without - * specific, written prior permission. Keith Packard makes no - * representations about the suitability of this software for any purpose. It - * is provided "as is" without express or implied warranty. - * - * THE COPYRIGHT HOLDERS DISCLAIM ALL WARRANTIES WITH REGARD TO THIS - * SOFTWARE, INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND - * FITNESS, IN NO EVENT SHALL THE COPYRIGHT HOLDERS BE LIABLE FOR ANY - * SPECIAL, INDIRECT OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES - * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN - * AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING - * OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS - * SOFTWARE. - */ - -#ifdef HAVE_CONFIG_H -#include <config.h> -#endif -#include <stdlib.h> -#include "pixman-private.h" - -static source_image_class_t -linear_gradient_classify (pixman_image_t *image, - int x, - int y, - int width, - int height) -{ - linear_gradient_t *linear = (linear_gradient_t *)image; - pixman_vector_t v; - pixman_fixed_32_32_t l; - pixman_fixed_48_16_t dx, dy, a, b, off; - pixman_fixed_48_16_t factors[4]; - int i; - - image->source.class = SOURCE_IMAGE_CLASS_UNKNOWN; - - dx = linear->p2.x - linear->p1.x; - dy = linear->p2.y - linear->p1.y; - - l = dx * dx + dy * dy; - - if (l) - { - a = (dx << 32) / l; - b = (dy << 32) / l; - } - else - { - a = b = 0; - } - - off = (-a * linear->p1.x - -b * linear->p1.y) >> 16; - - for (i = 0; i < 3; i++) - { - v.vector[0] = pixman_int_to_fixed ((i % 2) * (width - 1) + x); - v.vector[1] = pixman_int_to_fixed ((i / 2) * (height - 1) + y); - v.vector[2] = pixman_fixed_1; - - if (image->common.transform) - { - if (!pixman_transform_point_3d (image->common.transform, &v)) - { - image->source.class = SOURCE_IMAGE_CLASS_UNKNOWN; - - return image->source.class; - } - } - - factors[i] = ((a * v.vector[0] + b * v.vector[1]) >> 16) + off; - } - - if (factors[2] == factors[0]) - image->source.class = SOURCE_IMAGE_CLASS_HORIZONTAL; - else if (factors[1] == factors[0]) - image->source.class = SOURCE_IMAGE_CLASS_VERTICAL; - - return image->source.class; -} - -static void -linear_gradient_get_scanline_32 (pixman_image_t *image, - int x, - int y, - int width, - uint32_t * buffer, - const uint32_t *mask, - uint32_t mask_bits) -{ - pixman_vector_t v, unit; - pixman_fixed_32_32_t l; - pixman_fixed_48_16_t dx, dy, a, b, off; - gradient_t *gradient = (gradient_t *)image; - source_image_t *source = (source_image_t *)image; - linear_gradient_t *linear = (linear_gradient_t *)image; - uint32_t *end = buffer + width; - pixman_gradient_walker_t walker; - - _pixman_gradient_walker_init (&walker, gradient, source->common.repeat); - - /* reference point is the center of the pixel */ - v.vector[0] = pixman_int_to_fixed (x) + pixman_fixed_1 / 2; - v.vector[1] = pixman_int_to_fixed (y) + pixman_fixed_1 / 2; - v.vector[2] = pixman_fixed_1; - - if (source->common.transform) - { - if (!pixman_transform_point_3d (source->common.transform, &v)) - return; - - unit.vector[0] = source->common.transform->matrix[0][0]; - unit.vector[1] = source->common.transform->matrix[1][0]; - unit.vector[2] = source->common.transform->matrix[2][0]; - } - else - { - unit.vector[0] = pixman_fixed_1; - unit.vector[1] = 0; - unit.vector[2] = 0; - } - - dx = linear->p2.x - linear->p1.x; - dy = linear->p2.y - linear->p1.y; - - l = dx * dx + dy * dy; - - if (l != 0) - { - a = (dx << 32) / l; - b = (dy << 32) / l; - off = (-a * linear->p1.x - -b * linear->p1.y) >> 16; - } - - if (l == 0 || (unit.vector[2] == 0 && v.vector[2] == pixman_fixed_1)) - { - pixman_fixed_48_16_t inc, t; - - /* affine transformation only */ - if (l == 0) - { - t = 0; - inc = 0; - } - else - { - t = ((a * v.vector[0] + b * v.vector[1]) >> 16) + off; - inc = (a * unit.vector[0] + b * unit.vector[1]) >> 16; - } - - if (source->class == SOURCE_IMAGE_CLASS_VERTICAL) - { - register uint32_t color; - - color = _pixman_gradient_walker_pixel (&walker, t); - while (buffer < end) - *buffer++ = color; - } - else - { - if (!mask) - { - while (buffer < end) - { - *buffer++ = _pixman_gradient_walker_pixel (&walker, t); - - t += inc; - } - } - else - { - while (buffer < end) - { - if (*mask++ & mask_bits) - *buffer = _pixman_gradient_walker_pixel (&walker, t); - - buffer++; - t += inc; - } - } - } - } - else - { - /* projective transformation */ - pixman_fixed_48_16_t t; - - if (source->class == SOURCE_IMAGE_CLASS_VERTICAL) - { - register uint32_t color; - - if (v.vector[2] == 0) - { - t = 0; - } - else - { - pixman_fixed_48_16_t x, y; - - x = ((pixman_fixed_48_16_t) v.vector[0] << 16) / v.vector[2]; - y = ((pixman_fixed_48_16_t) v.vector[1] << 16) / v.vector[2]; - t = ((a * x + b * y) >> 16) + off; - } - - color = _pixman_gradient_walker_pixel (&walker, t); - while (buffer < end) - *buffer++ = color; - } - else - { - while (buffer < end) - { - if (!mask || *mask++ & mask_bits) - { - if (v.vector[2] == 0) - { - t = 0; - } - else - { - pixman_fixed_48_16_t x, y; - x = ((pixman_fixed_48_16_t)v.vector[0] << 16) / v.vector[2]; - y = ((pixman_fixed_48_16_t)v.vector[1] << 16) / v.vector[2]; - t = ((a * x + b * y) >> 16) + off; - } - - *buffer = _pixman_gradient_walker_pixel (&walker, t); - } - - ++buffer; - - v.vector[0] += unit.vector[0]; - v.vector[1] += unit.vector[1]; - v.vector[2] += unit.vector[2]; - } - } - } -} - -static void -linear_gradient_property_changed (pixman_image_t *image) -{ - image->common.get_scanline_32 = linear_gradient_get_scanline_32; - image->common.get_scanline_64 = _pixman_image_get_scanline_generic_64; -} - -PIXMAN_EXPORT pixman_image_t * -pixman_image_create_linear_gradient (pixman_point_fixed_t * p1, - pixman_point_fixed_t * p2, - const pixman_gradient_stop_t *stops, - int n_stops) -{ - pixman_image_t *image; - linear_gradient_t *linear; - - return_val_if_fail (n_stops >= 2, NULL); - - image = _pixman_image_allocate (); - - if (!image) - return NULL; - - linear = &image->linear; - - if (!_pixman_init_gradient (&linear->common, stops, n_stops)) - { - free (image); - return NULL; - } - - linear->p1 = *p1; - linear->p2 = *p2; - - image->type = LINEAR; - image->source.class = SOURCE_IMAGE_CLASS_UNKNOWN; - image->common.classify = linear_gradient_classify; - image->common.property_changed = linear_gradient_property_changed; - - return image; -} - +/*
+ * Copyright © 2000 SuSE, Inc.
+ * Copyright © 2007 Red Hat, Inc.
+ * Copyright © 2000 Keith Packard, member of The XFree86 Project, Inc.
+ * 2005 Lars Knoll & Zack Rusin, Trolltech
+ *
+ * Permission to use, copy, modify, distribute, and sell this software and its
+ * documentation for any purpose is hereby granted without fee, provided that
+ * the above copyright notice appear in all copies and that both that
+ * copyright notice and this permission notice appear in supporting
+ * documentation, and that the name of Keith Packard not be used in
+ * advertising or publicity pertaining to distribution of the software without
+ * specific, written prior permission. Keith Packard makes no
+ * representations about the suitability of this software for any purpose. It
+ * is provided "as is" without express or implied warranty.
+ *
+ * THE COPYRIGHT HOLDERS DISCLAIM ALL WARRANTIES WITH REGARD TO THIS
+ * SOFTWARE, INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND
+ * FITNESS, IN NO EVENT SHALL THE COPYRIGHT HOLDERS BE LIABLE FOR ANY
+ * SPECIAL, INDIRECT OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN
+ * AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING
+ * OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS
+ * SOFTWARE.
+ */
+
+#ifdef HAVE_CONFIG_H
+#include <config.h>
+#endif
+#include <stdlib.h>
+#include "pixman-private.h"
+
+static source_image_class_t
+linear_gradient_classify (pixman_image_t *image,
+ int x,
+ int y,
+ int width,
+ int height)
+{
+ linear_gradient_t *linear = (linear_gradient_t *)image;
+ pixman_vector_t v;
+ pixman_fixed_32_32_t l;
+ pixman_fixed_48_16_t dx, dy, a, b, off;
+ pixman_fixed_48_16_t factors[4];
+ int i;
+
+ image->source.class = SOURCE_IMAGE_CLASS_UNKNOWN;
+
+ dx = linear->p2.x - linear->p1.x;
+ dy = linear->p2.y - linear->p1.y;
+
+ l = dx * dx + dy * dy;
+
+ if (l)
+ {
+ a = (dx << 32) / l;
+ b = (dy << 32) / l;
+ }
+ else
+ {
+ a = b = 0;
+ }
+
+ off = (-a * linear->p1.x
+ -b * linear->p1.y) >> 16;
+
+ for (i = 0; i < 3; i++)
+ {
+ v.vector[0] = pixman_int_to_fixed ((i % 2) * (width - 1) + x);
+ v.vector[1] = pixman_int_to_fixed ((i / 2) * (height - 1) + y);
+ v.vector[2] = pixman_fixed_1;
+
+ if (image->common.transform)
+ {
+ if (!pixman_transform_point_3d (image->common.transform, &v))
+ {
+ image->source.class = SOURCE_IMAGE_CLASS_UNKNOWN;
+
+ return image->source.class;
+ }
+ }
+
+ factors[i] = ((a * v.vector[0] + b * v.vector[1]) >> 16) + off;
+ }
+
+ if (factors[2] == factors[0])
+ image->source.class = SOURCE_IMAGE_CLASS_HORIZONTAL;
+ else if (factors[1] == factors[0])
+ image->source.class = SOURCE_IMAGE_CLASS_VERTICAL;
+
+ return image->source.class;
+}
+
+static void
+linear_gradient_get_scanline_32 (pixman_image_t *image,
+ int x,
+ int y,
+ int width,
+ uint32_t * buffer,
+ const uint32_t *mask)
+{
+ pixman_vector_t v, unit;
+ pixman_fixed_32_32_t l;
+ pixman_fixed_48_16_t dx, dy, a, b, off;
+ gradient_t *gradient = (gradient_t *)image;
+ source_image_t *source = (source_image_t *)image;
+ linear_gradient_t *linear = (linear_gradient_t *)image;
+ uint32_t *end = buffer + width;
+ pixman_gradient_walker_t walker;
+
+ _pixman_gradient_walker_init (&walker, gradient, source->common.repeat);
+
+ /* reference point is the center of the pixel */
+ v.vector[0] = pixman_int_to_fixed (x) + pixman_fixed_1 / 2;
+ v.vector[1] = pixman_int_to_fixed (y) + pixman_fixed_1 / 2;
+ v.vector[2] = pixman_fixed_1;
+
+ if (source->common.transform)
+ {
+ if (!pixman_transform_point_3d (source->common.transform, &v))
+ return;
+
+ unit.vector[0] = source->common.transform->matrix[0][0];
+ unit.vector[1] = source->common.transform->matrix[1][0];
+ unit.vector[2] = source->common.transform->matrix[2][0];
+ }
+ else
+ {
+ unit.vector[0] = pixman_fixed_1;
+ unit.vector[1] = 0;
+ unit.vector[2] = 0;
+ }
+
+ dx = linear->p2.x - linear->p1.x;
+ dy = linear->p2.y - linear->p1.y;
+
+ l = dx * dx + dy * dy;
+
+ if (l != 0)
+ {
+ a = (dx << 32) / l;
+ b = (dy << 32) / l;
+ off = (-a * linear->p1.x
+ -b * linear->p1.y) >> 16;
+ }
+
+ if (l == 0 || (unit.vector[2] == 0 && v.vector[2] == pixman_fixed_1))
+ {
+ pixman_fixed_48_16_t inc, t;
+
+ /* affine transformation only */
+ if (l == 0)
+ {
+ t = 0;
+ inc = 0;
+ }
+ else
+ {
+ t = ((a * v.vector[0] + b * v.vector[1]) >> 16) + off;
+ inc = (a * unit.vector[0] + b * unit.vector[1]) >> 16;
+ }
+
+ if (source->class == SOURCE_IMAGE_CLASS_VERTICAL)
+ {
+ register uint32_t color;
+
+ color = _pixman_gradient_walker_pixel (&walker, t);
+ while (buffer < end)
+ *buffer++ = color;
+ }
+ else
+ {
+ if (!mask)
+ {
+ while (buffer < end)
+ {
+ *buffer++ = _pixman_gradient_walker_pixel (&walker, t);
+
+ t += inc;
+ }
+ }
+ else
+ {
+ while (buffer < end)
+ {
+ if (*mask++)
+ *buffer = _pixman_gradient_walker_pixel (&walker, t);
+
+ buffer++;
+ t += inc;
+ }
+ }
+ }
+ }
+ else
+ {
+ /* projective transformation */
+ pixman_fixed_48_16_t t;
+
+ if (source->class == SOURCE_IMAGE_CLASS_VERTICAL)
+ {
+ register uint32_t color;
+
+ if (v.vector[2] == 0)
+ {
+ t = 0;
+ }
+ else
+ {
+ pixman_fixed_48_16_t x, y;
+
+ x = ((pixman_fixed_48_16_t) v.vector[0] << 16) / v.vector[2];
+ y = ((pixman_fixed_48_16_t) v.vector[1] << 16) / v.vector[2];
+ t = ((a * x + b * y) >> 16) + off;
+ }
+
+ color = _pixman_gradient_walker_pixel (&walker, t);
+ while (buffer < end)
+ *buffer++ = color;
+ }
+ else
+ {
+ while (buffer < end)
+ {
+ if (!mask || *mask++)
+ {
+ if (v.vector[2] == 0)
+ {
+ t = 0;
+ }
+ else
+ {
+ pixman_fixed_48_16_t x, y;
+ x = ((pixman_fixed_48_16_t)v.vector[0] << 16) / v.vector[2];
+ y = ((pixman_fixed_48_16_t)v.vector[1] << 16) / v.vector[2];
+ t = ((a * x + b * y) >> 16) + off;
+ }
+
+ *buffer = _pixman_gradient_walker_pixel (&walker, t);
+ }
+
+ ++buffer;
+
+ v.vector[0] += unit.vector[0];
+ v.vector[1] += unit.vector[1];
+ v.vector[2] += unit.vector[2];
+ }
+ }
+ }
+}
+
+static void
+linear_gradient_property_changed (pixman_image_t *image)
+{
+ image->common.get_scanline_32 = linear_gradient_get_scanline_32;
+ image->common.get_scanline_64 = _pixman_image_get_scanline_generic_64;
+}
+
+PIXMAN_EXPORT pixman_image_t *
+pixman_image_create_linear_gradient (pixman_point_fixed_t * p1,
+ pixman_point_fixed_t * p2,
+ const pixman_gradient_stop_t *stops,
+ int n_stops)
+{
+ pixman_image_t *image;
+ linear_gradient_t *linear;
+
+ image = _pixman_image_allocate ();
+
+ if (!image)
+ return NULL;
+
+ linear = &image->linear;
+
+ if (!_pixman_init_gradient (&linear->common, stops, n_stops))
+ {
+ free (image);
+ return NULL;
+ }
+
+ linear->p1 = *p1;
+ linear->p2 = *p2;
+
+ image->type = LINEAR;
+ image->source.class = SOURCE_IMAGE_CLASS_UNKNOWN;
+ image->common.classify = linear_gradient_classify;
+ image->common.property_changed = linear_gradient_property_changed;
+
+ return image;
+}
+
diff --git a/pixman/pixman/pixman-private.h b/pixman/pixman/pixman-private.h index d5767af48..450f7654e 100644 --- a/pixman/pixman/pixman-private.h +++ b/pixman/pixman/pixman-private.h @@ -1,870 +1,866 @@ -#ifndef PACKAGE -# error config.h must be included before pixman-private.h -#endif - -#ifndef PIXMAN_PRIVATE_H -#define PIXMAN_PRIVATE_H - -#define PIXMAN_DISABLE_DEPRECATED -#define PIXMAN_USE_INTERNAL_API - -#include "pixman.h" -#include <time.h> -#include <assert.h> -#include <stdio.h> -#include <string.h> - -#include "pixman-compiler.h" - -/* - * Images - */ -typedef struct image_common image_common_t; -typedef struct source_image source_image_t; -typedef struct solid_fill solid_fill_t; -typedef struct gradient gradient_t; -typedef struct linear_gradient linear_gradient_t; -typedef struct horizontal_gradient horizontal_gradient_t; -typedef struct vertical_gradient vertical_gradient_t; -typedef struct conical_gradient conical_gradient_t; -typedef struct radial_gradient radial_gradient_t; -typedef struct bits_image bits_image_t; -typedef struct circle circle_t; - -typedef void (*fetch_scanline_t) (pixman_image_t *image, - int x, - int y, - int width, - uint32_t *buffer, - const uint32_t *mask, - uint32_t mask_bits); - -typedef uint32_t (*fetch_pixel_32_t) (bits_image_t *image, - int x, - int y); - -typedef uint64_t (*fetch_pixel_64_t) (bits_image_t *image, - int x, - int y); - -typedef void (*store_scanline_t) (bits_image_t * image, - int x, - int y, - int width, - const uint32_t *values); - -typedef enum -{ - BITS, - LINEAR, - CONICAL, - RADIAL, - SOLID -} image_type_t; - -typedef enum -{ - SOURCE_IMAGE_CLASS_UNKNOWN, - SOURCE_IMAGE_CLASS_HORIZONTAL, - SOURCE_IMAGE_CLASS_VERTICAL, -} source_image_class_t; - -typedef source_image_class_t (*classify_func_t) (pixman_image_t *image, - int x, - int y, - int width, - int height); -typedef void (*property_changed_func_t) (pixman_image_t *image); - -struct image_common -{ - image_type_t type; - int32_t ref_count; - pixman_region32_t clip_region; - pixman_bool_t have_clip_region; /* FALSE if there is no clip */ - pixman_bool_t client_clip; /* Whether the source clip was - set by a client */ - pixman_bool_t clip_sources; /* Whether the clip applies when - * the image is used as a source - */ - pixman_bool_t dirty; - pixman_transform_t * transform; - pixman_repeat_t repeat; - pixman_filter_t filter; - pixman_fixed_t * filter_params; - int n_filter_params; - bits_image_t * alpha_map; - int alpha_origin_x; - int alpha_origin_y; - pixman_bool_t component_alpha; - classify_func_t classify; - property_changed_func_t property_changed; - fetch_scanline_t get_scanline_32; - fetch_scanline_t get_scanline_64; - - pixman_image_destroy_func_t destroy_func; - void * destroy_data; - - uint32_t flags; - pixman_format_code_t extended_format_code; -}; - -struct source_image -{ - image_common_t common; - source_image_class_t class; -}; - -struct solid_fill -{ - source_image_t common; - pixman_color_t color; - - uint32_t color_32; - uint64_t color_64; -}; - -struct gradient -{ - source_image_t common; - int n_stops; - pixman_gradient_stop_t *stops; - int stop_range; -}; - -struct linear_gradient -{ - gradient_t common; - pixman_point_fixed_t p1; - pixman_point_fixed_t p2; -}; - -struct circle -{ - pixman_fixed_t x; - pixman_fixed_t y; - pixman_fixed_t radius; -}; - -struct radial_gradient -{ - gradient_t common; - - circle_t c1; - circle_t c2; - double cdx; - double cdy; - double dr; - double A; -}; - -struct conical_gradient -{ - gradient_t common; - pixman_point_fixed_t center; - pixman_fixed_t angle; -}; - -struct bits_image -{ - image_common_t common; - pixman_format_code_t format; - const pixman_indexed_t * indexed; - int width; - int height; - uint32_t * bits; - uint32_t * free_me; - int rowstride; /* in number of uint32_t's */ - - /* Fetch a pixel, disregarding alpha maps, transformations etc. */ - fetch_pixel_32_t fetch_pixel_raw_32; - fetch_pixel_64_t fetch_pixel_raw_64; - - /* Fetch a pixel, taking alpha maps into account */ - fetch_pixel_32_t fetch_pixel_32; - fetch_pixel_64_t fetch_pixel_64; - - /* Fetch raw scanlines, with no regard for transformations, alpha maps etc. */ - fetch_scanline_t fetch_scanline_raw_32; - fetch_scanline_t fetch_scanline_raw_64; - - /* Store scanlines with no regard for alpha maps */ - store_scanline_t store_scanline_raw_32; - store_scanline_t store_scanline_raw_64; - - /* Store a scanline, taking alpha maps into account */ - store_scanline_t store_scanline_32; - store_scanline_t store_scanline_64; - - /* Used for indirect access to the bits */ - pixman_read_memory_func_t read_func; - pixman_write_memory_func_t write_func; -}; - -union pixman_image -{ - image_type_t type; - image_common_t common; - bits_image_t bits; - source_image_t source; - gradient_t gradient; - linear_gradient_t linear; - conical_gradient_t conical; - radial_gradient_t radial; - solid_fill_t solid; -}; - - -void -_pixman_bits_image_setup_raw_accessors (bits_image_t *image); - -void -_pixman_image_get_scanline_generic_64 (pixman_image_t *image, - int x, - int y, - int width, - uint32_t * buffer, - const uint32_t *mask, - uint32_t mask_bits); - -source_image_class_t -_pixman_image_classify (pixman_image_t *image, - int x, - int y, - int width, - int height); - -void -_pixman_image_get_scanline_32 (pixman_image_t *image, - int x, - int y, - int width, - uint32_t * buffer, - const uint32_t *mask, - uint32_t mask_bits); - -/* Even thought the type of buffer is uint32_t *, the function actually expects - * a uint64_t *buffer. - */ -void -_pixman_image_get_scanline_64 (pixman_image_t *image, - int x, - int y, - int width, - uint32_t * buffer, - const uint32_t *unused, - uint32_t unused2); - -void -_pixman_image_store_scanline_32 (bits_image_t * image, - int x, - int y, - int width, - const uint32_t *buffer); - -/* Even though the type of buffer is uint32_t *, the function - * actually expects a uint64_t *buffer. - */ -void -_pixman_image_store_scanline_64 (bits_image_t * image, - int x, - int y, - int width, - const uint32_t *buffer); - -pixman_image_t * -_pixman_image_allocate (void); - -pixman_bool_t -_pixman_init_gradient (gradient_t * gradient, - const pixman_gradient_stop_t *stops, - int n_stops); -void -_pixman_image_reset_clip_region (pixman_image_t *image); - -void -_pixman_image_validate (pixman_image_t *image); - -uint32_t -_pixman_image_get_solid (pixman_image_t * image, - pixman_format_code_t format); - -#define PIXMAN_IMAGE_GET_LINE(image, x, y, type, out_stride, line, mul) \ - do \ - { \ - uint32_t *__bits__; \ - int __stride__; \ - \ - __bits__ = image->bits.bits; \ - __stride__ = image->bits.rowstride; \ - (out_stride) = \ - __stride__ * (int) sizeof (uint32_t) / (int) sizeof (type); \ - (line) = \ - ((type *) __bits__) + (out_stride) * (y) + (mul) * (x); \ - } while (0) - -/* - * Gradient walker - */ -typedef struct -{ - uint32_t left_ag; - uint32_t left_rb; - uint32_t right_ag; - uint32_t right_rb; - int32_t left_x; - int32_t right_x; - int32_t stepper; - - pixman_gradient_stop_t *stops; - int num_stops; - unsigned int spread; - - int need_reset; -} pixman_gradient_walker_t; - -void -_pixman_gradient_walker_init (pixman_gradient_walker_t *walker, - gradient_t * gradient, - unsigned int spread); - -void -_pixman_gradient_walker_reset (pixman_gradient_walker_t *walker, - pixman_fixed_32_32_t pos); - -uint32_t -_pixman_gradient_walker_pixel (pixman_gradient_walker_t *walker, - pixman_fixed_32_32_t x); - -/* - * Edges - */ - -#define MAX_ALPHA(n) ((1 << (n)) - 1) -#define N_Y_FRAC(n) ((n) == 1 ? 1 : (1 << ((n) / 2)) - 1) -#define N_X_FRAC(n) ((n) == 1 ? 1 : (1 << ((n) / 2)) + 1) - -#define STEP_Y_SMALL(n) (pixman_fixed_1 / N_Y_FRAC (n)) -#define STEP_Y_BIG(n) (pixman_fixed_1 - (N_Y_FRAC (n) - 1) * STEP_Y_SMALL (n)) - -#define Y_FRAC_FIRST(n) (STEP_Y_BIG (n) / 2) -#define Y_FRAC_LAST(n) (Y_FRAC_FIRST (n) + (N_Y_FRAC (n) - 1) * STEP_Y_SMALL (n)) - -#define STEP_X_SMALL(n) (pixman_fixed_1 / N_X_FRAC (n)) -#define STEP_X_BIG(n) (pixman_fixed_1 - (N_X_FRAC (n) - 1) * STEP_X_SMALL (n)) - -#define X_FRAC_FIRST(n) (STEP_X_BIG (n) / 2) -#define X_FRAC_LAST(n) (X_FRAC_FIRST (n) + (N_X_FRAC (n) - 1) * STEP_X_SMALL (n)) - -#define RENDER_SAMPLES_X(x, n) \ - ((n) == 1? 0 : (pixman_fixed_frac (x) + \ - X_FRAC_FIRST (n)) / STEP_X_SMALL (n)) - -void -pixman_rasterize_edges_accessors (pixman_image_t *image, - pixman_edge_t * l, - pixman_edge_t * r, - pixman_fixed_t t, - pixman_fixed_t b); - -/* - * Implementations - */ -typedef struct pixman_implementation_t pixman_implementation_t; - -typedef void (*pixman_combine_32_func_t) (pixman_implementation_t *imp, - pixman_op_t op, - uint32_t * dest, - const uint32_t * src, - const uint32_t * mask, - int width); - -typedef void (*pixman_combine_64_func_t) (pixman_implementation_t *imp, - pixman_op_t op, - uint64_t * dest, - const uint64_t * src, - const uint64_t * mask, - int width); - -typedef void (*pixman_composite_func_t) (pixman_implementation_t *imp, - pixman_op_t op, - pixman_image_t * src, - pixman_image_t * mask, - pixman_image_t * dest, - int32_t src_x, - int32_t src_y, - int32_t mask_x, - int32_t mask_y, - int32_t dest_x, - int32_t dest_y, - int32_t width, - int32_t height); -typedef pixman_bool_t (*pixman_blt_func_t) (pixman_implementation_t *imp, - uint32_t * src_bits, - uint32_t * dst_bits, - int src_stride, - int dst_stride, - int src_bpp, - int dst_bpp, - int src_x, - int src_y, - int dst_x, - int dst_y, - int width, - int height); -typedef pixman_bool_t (*pixman_fill_func_t) (pixman_implementation_t *imp, - uint32_t * bits, - int stride, - int bpp, - int x, - int y, - int width, - int height, - uint32_t xor); - -void _pixman_setup_combiner_functions_32 (pixman_implementation_t *imp); -void _pixman_setup_combiner_functions_64 (pixman_implementation_t *imp); - -typedef struct -{ - pixman_op_t op; - pixman_format_code_t src_format; - uint32_t src_flags; - pixman_format_code_t mask_format; - uint32_t mask_flags; - pixman_format_code_t dest_format; - uint32_t dest_flags; - pixman_composite_func_t func; -} pixman_fast_path_t; - -struct pixman_implementation_t -{ - pixman_implementation_t * toplevel; - pixman_implementation_t * delegate; - const pixman_fast_path_t * fast_paths; - - pixman_blt_func_t blt; - pixman_fill_func_t fill; - - pixman_combine_32_func_t combine_32[PIXMAN_N_OPERATORS]; - pixman_combine_32_func_t combine_32_ca[PIXMAN_N_OPERATORS]; - pixman_combine_64_func_t combine_64[PIXMAN_N_OPERATORS]; - pixman_combine_64_func_t combine_64_ca[PIXMAN_N_OPERATORS]; -}; - -pixman_implementation_t * -_pixman_implementation_create (pixman_implementation_t *delegate, - const pixman_fast_path_t *fast_paths); - -void -_pixman_implementation_combine_32 (pixman_implementation_t *imp, - pixman_op_t op, - uint32_t * dest, - const uint32_t * src, - const uint32_t * mask, - int width); -void -_pixman_implementation_combine_64 (pixman_implementation_t *imp, - pixman_op_t op, - uint64_t * dest, - const uint64_t * src, - const uint64_t * mask, - int width); -void -_pixman_implementation_combine_32_ca (pixman_implementation_t *imp, - pixman_op_t op, - uint32_t * dest, - const uint32_t * src, - const uint32_t * mask, - int width); -void -_pixman_implementation_combine_64_ca (pixman_implementation_t *imp, - pixman_op_t op, - uint64_t * dest, - const uint64_t * src, - const uint64_t * mask, - int width); - -pixman_bool_t -_pixman_implementation_blt (pixman_implementation_t *imp, - uint32_t * src_bits, - uint32_t * dst_bits, - int src_stride, - int dst_stride, - int src_bpp, - int dst_bpp, - int src_x, - int src_y, - int dst_x, - int dst_y, - int width, - int height); - -pixman_bool_t -_pixman_implementation_fill (pixman_implementation_t *imp, - uint32_t * bits, - int stride, - int bpp, - int x, - int y, - int width, - int height, - uint32_t xor); - -/* Specific implementations */ -pixman_implementation_t * -_pixman_implementation_create_general (void); - -pixman_implementation_t * -_pixman_implementation_create_fast_path (void); - -#ifdef USE_MMX -pixman_implementation_t * -_pixman_implementation_create_mmx (void); -#endif - -#ifdef USE_SSE2 -pixman_implementation_t * -_pixman_implementation_create_sse2 (void); -#endif - -#ifdef USE_ARM_SIMD -pixman_implementation_t * -_pixman_implementation_create_arm_simd (void); -#endif - -#ifdef USE_ARM_NEON -pixman_implementation_t * -_pixman_implementation_create_arm_neon (void); -#endif - -#ifdef USE_VMX -pixman_implementation_t * -_pixman_implementation_create_vmx (void); -#endif - -pixman_implementation_t * -_pixman_choose_implementation (void); - - - -/* - * Utilities - */ - -/* These "formats" all have depth 0, so they - * will never clash with any real ones - */ -#define PIXMAN_null PIXMAN_FORMAT (0, 0, 0, 0, 0, 0) -#define PIXMAN_solid PIXMAN_FORMAT (0, 1, 0, 0, 0, 0) -#define PIXMAN_pixbuf PIXMAN_FORMAT (0, 2, 0, 0, 0, 0) -#define PIXMAN_rpixbuf PIXMAN_FORMAT (0, 3, 0, 0, 0, 0) -#define PIXMAN_unknown PIXMAN_FORMAT (0, 4, 0, 0, 0, 0) -#define PIXMAN_any PIXMAN_FORMAT (0, 5, 0, 0, 0, 0) - -#define PIXMAN_OP_any (PIXMAN_N_OPERATORS + 1) - -#define FAST_PATH_ID_TRANSFORM (1 << 0) -#define FAST_PATH_NO_ALPHA_MAP (1 << 1) -#define FAST_PATH_NO_CONVOLUTION_FILTER (1 << 2) -#define FAST_PATH_NO_PAD_REPEAT (1 << 3) -#define FAST_PATH_NO_REFLECT_REPEAT (1 << 4) -#define FAST_PATH_NO_ACCESSORS (1 << 5) -#define FAST_PATH_NO_WIDE_FORMAT (1 << 6) -#define FAST_PATH_COVERS_CLIP (1 << 7) -#define FAST_PATH_COMPONENT_ALPHA (1 << 8) -#define FAST_PATH_UNIFIED_ALPHA (1 << 9) -#define FAST_PATH_SCALE_TRANSFORM (1 << 10) -#define FAST_PATH_NEAREST_FILTER (1 << 11) -#define FAST_PATH_SIMPLE_REPEAT (1 << 12) -#define FAST_PATH_IS_OPAQUE (1 << 13) -#define FAST_PATH_NEEDS_WORKAROUND (1 << 14) -#define FAST_PATH_NO_NONE_REPEAT (1 << 15) -#define FAST_PATH_SAMPLES_COVER_CLIP (1 << 16) -#define FAST_PATH_16BIT_SAFE (1 << 17) -#define FAST_PATH_X_UNIT_POSITIVE (1 << 18) - -#define _FAST_PATH_STANDARD_FLAGS \ - (FAST_PATH_ID_TRANSFORM | \ - FAST_PATH_NO_ALPHA_MAP | \ - FAST_PATH_NO_CONVOLUTION_FILTER | \ - FAST_PATH_NO_PAD_REPEAT | \ - FAST_PATH_NO_REFLECT_REPEAT | \ - FAST_PATH_NO_ACCESSORS | \ - FAST_PATH_NO_WIDE_FORMAT | \ - FAST_PATH_COVERS_CLIP) - -#define FAST_PATH_STD_SRC_FLAGS \ - _FAST_PATH_STANDARD_FLAGS -#define FAST_PATH_STD_MASK_U_FLAGS \ - (_FAST_PATH_STANDARD_FLAGS | \ - FAST_PATH_UNIFIED_ALPHA) -#define FAST_PATH_STD_MASK_CA_FLAGS \ - (_FAST_PATH_STANDARD_FLAGS | \ - FAST_PATH_COMPONENT_ALPHA) -#define FAST_PATH_STD_DEST_FLAGS \ - (FAST_PATH_NO_ACCESSORS | \ - FAST_PATH_NO_WIDE_FORMAT) - -#define FAST_PATH(op, src, src_flags, mask, mask_flags, dest, dest_flags, func) \ - PIXMAN_OP_ ## op, \ - PIXMAN_ ## src, \ - src_flags, \ - PIXMAN_ ## mask, \ - mask_flags, \ - PIXMAN_ ## dest, \ - dest_flags, \ - func - -#define PIXMAN_STD_FAST_PATH(op, src, mask, dest, func) \ - { FAST_PATH ( \ - op, \ - src, FAST_PATH_STD_SRC_FLAGS, \ - mask, (PIXMAN_ ## mask) ? FAST_PATH_STD_MASK_U_FLAGS : 0, \ - dest, FAST_PATH_STD_DEST_FLAGS, \ - func) } - -#define PIXMAN_STD_FAST_PATH_CA(op, src, mask, dest, func) \ - { FAST_PATH ( \ - op, \ - src, FAST_PATH_STD_SRC_FLAGS, \ - mask, FAST_PATH_STD_MASK_CA_FLAGS, \ - dest, FAST_PATH_STD_DEST_FLAGS, \ - func) } - -/* Memory allocation helpers */ -void * -pixman_malloc_ab (unsigned int n, unsigned int b); - -void * -pixman_malloc_abc (unsigned int a, unsigned int b, unsigned int c); - -pixman_bool_t -pixman_multiply_overflows_int (unsigned int a, unsigned int b); - -pixman_bool_t -pixman_addition_overflows_int (unsigned int a, unsigned int b); - -/* Compositing utilities */ -void -pixman_expand (uint64_t * dst, - const uint32_t * src, - pixman_format_code_t format, - int width); - -void -pixman_contract (uint32_t * dst, - const uint64_t *src, - int width); - - -/* Region Helpers */ -pixman_bool_t -pixman_region32_copy_from_region16 (pixman_region32_t *dst, - pixman_region16_t *src); - -pixman_bool_t -pixman_region16_copy_from_region32 (pixman_region16_t *dst, - pixman_region32_t *src); - - -/* Misc macros */ - -#ifndef FALSE -# define FALSE 0 -#endif - -#ifndef TRUE -# define TRUE 1 -#endif - -#ifndef MIN -# define MIN(a, b) ((a < b) ? a : b) -#endif - -#ifndef MAX -# define MAX(a, b) ((a > b) ? a : b) -#endif - -/* Integer division that rounds towards -infinity */ -#define DIV(a, b) \ - ((((a) < 0) == ((b) < 0)) ? (a) / (b) : \ - ((a) - (b) + 1 - (((b) < 0) << 1)) / (b)) - -/* Modulus that produces the remainder wrt. DIV */ -#define MOD(a, b) ((a) < 0 ? ((b) - ((-(a) - 1) % (b))) - 1 : (a) % (b)) - -#define CLIP(v, low, high) ((v) < (low) ? (low) : ((v) > (high) ? (high) : (v))) - -/* Conversion between 8888 and 0565 */ - -#define CONVERT_8888_TO_0565(s) \ - ((((s) >> 3) & 0x001f) | \ - (((s) >> 5) & 0x07e0) | \ - (((s) >> 8) & 0xf800)) - -#define CONVERT_0565_TO_0888(s) \ - (((((s) << 3) & 0xf8) | (((s) >> 2) & 0x7)) | \ - ((((s) << 5) & 0xfc00) | (((s) >> 1) & 0x300)) | \ - ((((s) << 8) & 0xf80000) | (((s) << 3) & 0x70000))) - -#define CONVERT_0565_TO_8888(s) (CONVERT_0565_TO_0888(s) | 0xff000000) - -/* Trivial versions that are useful in macros */ -#define CONVERT_8888_TO_8888(s) (s) -#define CONVERT_0565_TO_0565(s) (s) - -#define PIXMAN_FORMAT_IS_WIDE(f) \ - (PIXMAN_FORMAT_A (f) > 8 || \ - PIXMAN_FORMAT_R (f) > 8 || \ - PIXMAN_FORMAT_G (f) > 8 || \ - PIXMAN_FORMAT_B (f) > 8) - -#ifdef WORDS_BIGENDIAN -# define SCREEN_SHIFT_LEFT(x,n) ((x) << (n)) -# define SCREEN_SHIFT_RIGHT(x,n) ((x) >> (n)) -#else -# define SCREEN_SHIFT_LEFT(x,n) ((x) >> (n)) -# define SCREEN_SHIFT_RIGHT(x,n) ((x) << (n)) -#endif - -/* - * Various debugging code - */ - -#undef DEBUG - -/* Turn on debugging depending on what type of release this is - */ -#if (((PIXMAN_VERSION_MICRO % 2) == 0) && ((PIXMAN_VERSION_MINOR % 2) == 1)) - -/* Debugging gets turned on for development releases because these - * are the things that end up in bleeding edge distributions such - * as Rawhide etc. - * - * For performance reasons we don't turn it on for stable releases or - * random git checkouts. (Random git checkouts are often used for - * performance work). - */ - -# define DEBUG - -#endif - -#ifdef DEBUG - -void -_pixman_log_error (const char *function, const char *message); - -#define return_if_fail(expr) \ - do \ - { \ - if (!(expr)) \ - { \ - _pixman_log_error (FUNC, "The expression " # expr " was false"); \ - return; \ - } \ - } \ - while (0) - -#define return_val_if_fail(expr, retval) \ - do \ - { \ - if (!(expr)) \ - { \ - _pixman_log_error (FUNC, "The expression " # expr " was false"); \ - return (retval); \ - } \ - } \ - while (0) - -#define critical_if_fail(expr) \ - do \ - { \ - if (!(expr)) \ - _pixman_log_error (FUNC, "The expression " # expr " was false"); \ - } \ - while (0) - - -#else - -#define _pixman_log_error(f,m) do { } while (0) \ - -#define return_if_fail(expr) \ - do \ - { \ - if (!(expr)) \ - return; \ - } \ - while (0) - -#define return_val_if_fail(expr, retval) \ - do \ - { \ - if (!(expr)) \ - return (retval); \ - } \ - while (0) - -#define critical_if_fail(expr) \ - do \ - { \ - } \ - while (0) -#endif - -/* - * Timers - */ - -#ifdef PIXMAN_TIMERS - -static inline uint64_t -oil_profile_stamp_rdtsc (void) -{ - uint64_t ts; - - __asm__ __volatile__ ("rdtsc\n" : "=A" (ts)); - return ts; -} - -#define OIL_STAMP oil_profile_stamp_rdtsc - -typedef struct pixman_timer_t pixman_timer_t; - -struct pixman_timer_t -{ - int initialized; - const char * name; - uint64_t n_times; - uint64_t total; - pixman_timer_t *next; -}; - -extern int timer_defined; - -void pixman_timer_register (pixman_timer_t *timer); - -#define TIMER_BEGIN(tname) \ - { \ - static pixman_timer_t timer ## tname; \ - uint64_t begin ## tname; \ - \ - if (!timer ## tname.initialized) \ - { \ - timer ## tname.initialized = 1; \ - timer ## tname.name = # tname; \ - pixman_timer_register (&timer ## tname); \ - } \ - \ - timer ## tname.n_times++; \ - begin ## tname = OIL_STAMP (); - -#define TIMER_END(tname) \ - timer ## tname.total += OIL_STAMP () - begin ## tname; \ - } - -#endif /* PIXMAN_TIMERS */ - -#endif /* PIXMAN_PRIVATE_H */ +#ifndef PACKAGE
+# error config.h must be included before pixman-private.h
+#endif
+
+#ifndef PIXMAN_PRIVATE_H
+#define PIXMAN_PRIVATE_H
+
+#define PIXMAN_DISABLE_DEPRECATED
+#define PIXMAN_USE_INTERNAL_API
+
+#include "pixman.h"
+#include <time.h>
+#include <assert.h>
+#include <stdio.h>
+#include <string.h>
+
+#include "pixman-compiler.h"
+
+/*
+ * Images
+ */
+typedef struct image_common image_common_t;
+typedef struct source_image source_image_t;
+typedef struct solid_fill solid_fill_t;
+typedef struct gradient gradient_t;
+typedef struct linear_gradient linear_gradient_t;
+typedef struct horizontal_gradient horizontal_gradient_t;
+typedef struct vertical_gradient vertical_gradient_t;
+typedef struct conical_gradient conical_gradient_t;
+typedef struct radial_gradient radial_gradient_t;
+typedef struct bits_image bits_image_t;
+typedef struct circle circle_t;
+
+typedef void (*fetch_scanline_t) (pixman_image_t *image,
+ int x,
+ int y,
+ int width,
+ uint32_t *buffer,
+ const uint32_t *mask);
+
+typedef uint32_t (*fetch_pixel_32_t) (bits_image_t *image,
+ int x,
+ int y);
+
+typedef uint64_t (*fetch_pixel_64_t) (bits_image_t *image,
+ int x,
+ int y);
+
+typedef void (*store_scanline_t) (bits_image_t * image,
+ int x,
+ int y,
+ int width,
+ const uint32_t *values);
+
+typedef enum
+{
+ BITS,
+ LINEAR,
+ CONICAL,
+ RADIAL,
+ SOLID
+} image_type_t;
+
+typedef enum
+{
+ SOURCE_IMAGE_CLASS_UNKNOWN,
+ SOURCE_IMAGE_CLASS_HORIZONTAL,
+ SOURCE_IMAGE_CLASS_VERTICAL,
+} source_image_class_t;
+
+typedef source_image_class_t (*classify_func_t) (pixman_image_t *image,
+ int x,
+ int y,
+ int width,
+ int height);
+typedef void (*property_changed_func_t) (pixman_image_t *image);
+
+struct image_common
+{
+ image_type_t type;
+ int32_t ref_count;
+ pixman_region32_t clip_region;
+ pixman_bool_t have_clip_region; /* FALSE if there is no clip */
+ pixman_bool_t client_clip; /* Whether the source clip was
+ set by a client */
+ pixman_bool_t clip_sources; /* Whether the clip applies when
+ * the image is used as a source
+ */
+ pixman_bool_t dirty;
+ pixman_transform_t * transform;
+ pixman_repeat_t repeat;
+ pixman_filter_t filter;
+ pixman_fixed_t * filter_params;
+ int n_filter_params;
+ bits_image_t * alpha_map;
+ int alpha_origin_x;
+ int alpha_origin_y;
+ pixman_bool_t component_alpha;
+ classify_func_t classify;
+ property_changed_func_t property_changed;
+ fetch_scanline_t get_scanline_32;
+ fetch_scanline_t get_scanline_64;
+
+ pixman_image_destroy_func_t destroy_func;
+ void * destroy_data;
+
+ uint32_t flags;
+ pixman_format_code_t extended_format_code;
+};
+
+struct source_image
+{
+ image_common_t common;
+ source_image_class_t class;
+};
+
+struct solid_fill
+{
+ source_image_t common;
+ pixman_color_t color;
+
+ uint32_t color_32;
+ uint64_t color_64;
+};
+
+struct gradient
+{
+ source_image_t common;
+ int n_stops;
+ pixman_gradient_stop_t *stops;
+ int stop_range;
+};
+
+struct linear_gradient
+{
+ gradient_t common;
+ pixman_point_fixed_t p1;
+ pixman_point_fixed_t p2;
+};
+
+struct circle
+{
+ pixman_fixed_t x;
+ pixman_fixed_t y;
+ pixman_fixed_t radius;
+};
+
+struct radial_gradient
+{
+ gradient_t common;
+
+ circle_t c1;
+ circle_t c2;
+ double cdx;
+ double cdy;
+ double dr;
+ double A;
+};
+
+struct conical_gradient
+{
+ gradient_t common;
+ pixman_point_fixed_t center;
+ double angle;
+};
+
+struct bits_image
+{
+ image_common_t common;
+ pixman_format_code_t format;
+ const pixman_indexed_t * indexed;
+ int width;
+ int height;
+ uint32_t * bits;
+ uint32_t * free_me;
+ int rowstride; /* in number of uint32_t's */
+
+ /* Fetch a pixel, disregarding alpha maps, transformations etc. */
+ fetch_pixel_32_t fetch_pixel_raw_32;
+ fetch_pixel_64_t fetch_pixel_raw_64;
+
+ /* Fetch a pixel, taking alpha maps into account */
+ fetch_pixel_32_t fetch_pixel_32;
+ fetch_pixel_64_t fetch_pixel_64;
+
+ /* Fetch raw scanlines, with no regard for transformations, alpha maps etc. */
+ fetch_scanline_t fetch_scanline_raw_32;
+ fetch_scanline_t fetch_scanline_raw_64;
+
+ /* Store scanlines with no regard for alpha maps */
+ store_scanline_t store_scanline_raw_32;
+ store_scanline_t store_scanline_raw_64;
+
+ /* Store a scanline, taking alpha maps into account */
+ store_scanline_t store_scanline_32;
+ store_scanline_t store_scanline_64;
+
+ /* Used for indirect access to the bits */
+ pixman_read_memory_func_t read_func;
+ pixman_write_memory_func_t write_func;
+};
+
+union pixman_image
+{
+ image_type_t type;
+ image_common_t common;
+ bits_image_t bits;
+ source_image_t source;
+ gradient_t gradient;
+ linear_gradient_t linear;
+ conical_gradient_t conical;
+ radial_gradient_t radial;
+ solid_fill_t solid;
+};
+
+
+void
+_pixman_bits_image_setup_raw_accessors (bits_image_t *image);
+
+void
+_pixman_image_get_scanline_generic_64 (pixman_image_t *image,
+ int x,
+ int y,
+ int width,
+ uint32_t * buffer,
+ const uint32_t *mask);
+
+source_image_class_t
+_pixman_image_classify (pixman_image_t *image,
+ int x,
+ int y,
+ int width,
+ int height);
+
+void
+_pixman_image_get_scanline_32 (pixman_image_t *image,
+ int x,
+ int y,
+ int width,
+ uint32_t * buffer,
+ const uint32_t *mask);
+
+/* Even thought the type of buffer is uint32_t *, the function actually expects
+ * a uint64_t *buffer.
+ */
+void
+_pixman_image_get_scanline_64 (pixman_image_t *image,
+ int x,
+ int y,
+ int width,
+ uint32_t * buffer,
+ const uint32_t *unused);
+
+void
+_pixman_image_store_scanline_32 (bits_image_t * image,
+ int x,
+ int y,
+ int width,
+ const uint32_t *buffer);
+
+/* Even though the type of buffer is uint32_t *, the function
+ * actually expects a uint64_t *buffer.
+ */
+void
+_pixman_image_store_scanline_64 (bits_image_t * image,
+ int x,
+ int y,
+ int width,
+ const uint32_t *buffer);
+
+pixman_image_t *
+_pixman_image_allocate (void);
+
+pixman_bool_t
+_pixman_init_gradient (gradient_t * gradient,
+ const pixman_gradient_stop_t *stops,
+ int n_stops);
+void
+_pixman_image_reset_clip_region (pixman_image_t *image);
+
+void
+_pixman_image_validate (pixman_image_t *image);
+
+uint32_t
+_pixman_image_get_solid (pixman_image_t * image,
+ pixman_format_code_t format);
+
+#define PIXMAN_IMAGE_GET_LINE(image, x, y, type, out_stride, line, mul) \
+ do \
+ { \
+ uint32_t *__bits__; \
+ int __stride__; \
+ \
+ __bits__ = image->bits.bits; \
+ __stride__ = image->bits.rowstride; \
+ (out_stride) = \
+ __stride__ * (int) sizeof (uint32_t) / (int) sizeof (type); \
+ (line) = \
+ ((type *) __bits__) + (out_stride) * (y) + (mul) * (x); \
+ } while (0)
+
+/*
+ * Gradient walker
+ */
+typedef struct
+{
+ uint32_t left_ag;
+ uint32_t left_rb;
+ uint32_t right_ag;
+ uint32_t right_rb;
+ int32_t left_x;
+ int32_t right_x;
+ int32_t stepper;
+
+ pixman_gradient_stop_t *stops;
+ int num_stops;
+ unsigned int spread;
+
+ int need_reset;
+} pixman_gradient_walker_t;
+
+void
+_pixman_gradient_walker_init (pixman_gradient_walker_t *walker,
+ gradient_t * gradient,
+ unsigned int spread);
+
+void
+_pixman_gradient_walker_reset (pixman_gradient_walker_t *walker,
+ pixman_fixed_32_32_t pos);
+
+uint32_t
+_pixman_gradient_walker_pixel (pixman_gradient_walker_t *walker,
+ pixman_fixed_32_32_t x);
+
+/*
+ * Edges
+ */
+
+#define MAX_ALPHA(n) ((1 << (n)) - 1)
+#define N_Y_FRAC(n) ((n) == 1 ? 1 : (1 << ((n) / 2)) - 1)
+#define N_X_FRAC(n) ((n) == 1 ? 1 : (1 << ((n) / 2)) + 1)
+
+#define STEP_Y_SMALL(n) (pixman_fixed_1 / N_Y_FRAC (n))
+#define STEP_Y_BIG(n) (pixman_fixed_1 - (N_Y_FRAC (n) - 1) * STEP_Y_SMALL (n))
+
+#define Y_FRAC_FIRST(n) (STEP_Y_BIG (n) / 2)
+#define Y_FRAC_LAST(n) (Y_FRAC_FIRST (n) + (N_Y_FRAC (n) - 1) * STEP_Y_SMALL (n))
+
+#define STEP_X_SMALL(n) (pixman_fixed_1 / N_X_FRAC (n))
+#define STEP_X_BIG(n) (pixman_fixed_1 - (N_X_FRAC (n) - 1) * STEP_X_SMALL (n))
+
+#define X_FRAC_FIRST(n) (STEP_X_BIG (n) / 2)
+#define X_FRAC_LAST(n) (X_FRAC_FIRST (n) + (N_X_FRAC (n) - 1) * STEP_X_SMALL (n))
+
+#define RENDER_SAMPLES_X(x, n) \
+ ((n) == 1? 0 : (pixman_fixed_frac (x) + \
+ X_FRAC_FIRST (n)) / STEP_X_SMALL (n))
+
+void
+pixman_rasterize_edges_accessors (pixman_image_t *image,
+ pixman_edge_t * l,
+ pixman_edge_t * r,
+ pixman_fixed_t t,
+ pixman_fixed_t b);
+
+/*
+ * Implementations
+ */
+typedef struct pixman_implementation_t pixman_implementation_t;
+
+typedef void (*pixman_combine_32_func_t) (pixman_implementation_t *imp,
+ pixman_op_t op,
+ uint32_t * dest,
+ const uint32_t * src,
+ const uint32_t * mask,
+ int width);
+
+typedef void (*pixman_combine_64_func_t) (pixman_implementation_t *imp,
+ pixman_op_t op,
+ uint64_t * dest,
+ const uint64_t * src,
+ const uint64_t * mask,
+ int width);
+
+typedef void (*pixman_composite_func_t) (pixman_implementation_t *imp,
+ pixman_op_t op,
+ pixman_image_t * src,
+ pixman_image_t * mask,
+ pixman_image_t * dest,
+ int32_t src_x,
+ int32_t src_y,
+ int32_t mask_x,
+ int32_t mask_y,
+ int32_t dest_x,
+ int32_t dest_y,
+ int32_t width,
+ int32_t height);
+typedef pixman_bool_t (*pixman_blt_func_t) (pixman_implementation_t *imp,
+ uint32_t * src_bits,
+ uint32_t * dst_bits,
+ int src_stride,
+ int dst_stride,
+ int src_bpp,
+ int dst_bpp,
+ int src_x,
+ int src_y,
+ int dst_x,
+ int dst_y,
+ int width,
+ int height);
+typedef pixman_bool_t (*pixman_fill_func_t) (pixman_implementation_t *imp,
+ uint32_t * bits,
+ int stride,
+ int bpp,
+ int x,
+ int y,
+ int width,
+ int height,
+ uint32_t xor);
+
+void _pixman_setup_combiner_functions_32 (pixman_implementation_t *imp);
+void _pixman_setup_combiner_functions_64 (pixman_implementation_t *imp);
+
+typedef struct
+{
+ pixman_op_t op;
+ pixman_format_code_t src_format;
+ uint32_t src_flags;
+ pixman_format_code_t mask_format;
+ uint32_t mask_flags;
+ pixman_format_code_t dest_format;
+ uint32_t dest_flags;
+ pixman_composite_func_t func;
+} pixman_fast_path_t;
+
+struct pixman_implementation_t
+{
+ pixman_implementation_t * toplevel;
+ pixman_implementation_t * delegate;
+ const pixman_fast_path_t * fast_paths;
+
+ pixman_blt_func_t blt;
+ pixman_fill_func_t fill;
+
+ pixman_combine_32_func_t combine_32[PIXMAN_N_OPERATORS];
+ pixman_combine_32_func_t combine_32_ca[PIXMAN_N_OPERATORS];
+ pixman_combine_64_func_t combine_64[PIXMAN_N_OPERATORS];
+ pixman_combine_64_func_t combine_64_ca[PIXMAN_N_OPERATORS];
+};
+
+pixman_implementation_t *
+_pixman_implementation_create (pixman_implementation_t *delegate,
+ const pixman_fast_path_t *fast_paths);
+
+void
+_pixman_implementation_combine_32 (pixman_implementation_t *imp,
+ pixman_op_t op,
+ uint32_t * dest,
+ const uint32_t * src,
+ const uint32_t * mask,
+ int width);
+void
+_pixman_implementation_combine_64 (pixman_implementation_t *imp,
+ pixman_op_t op,
+ uint64_t * dest,
+ const uint64_t * src,
+ const uint64_t * mask,
+ int width);
+void
+_pixman_implementation_combine_32_ca (pixman_implementation_t *imp,
+ pixman_op_t op,
+ uint32_t * dest,
+ const uint32_t * src,
+ const uint32_t * mask,
+ int width);
+void
+_pixman_implementation_combine_64_ca (pixman_implementation_t *imp,
+ pixman_op_t op,
+ uint64_t * dest,
+ const uint64_t * src,
+ const uint64_t * mask,
+ int width);
+
+pixman_bool_t
+_pixman_implementation_blt (pixman_implementation_t *imp,
+ uint32_t * src_bits,
+ uint32_t * dst_bits,
+ int src_stride,
+ int dst_stride,
+ int src_bpp,
+ int dst_bpp,
+ int src_x,
+ int src_y,
+ int dst_x,
+ int dst_y,
+ int width,
+ int height);
+
+pixman_bool_t
+_pixman_implementation_fill (pixman_implementation_t *imp,
+ uint32_t * bits,
+ int stride,
+ int bpp,
+ int x,
+ int y,
+ int width,
+ int height,
+ uint32_t xor);
+
+/* Specific implementations */
+pixman_implementation_t *
+_pixman_implementation_create_general (void);
+
+pixman_implementation_t *
+_pixman_implementation_create_fast_path (void);
+
+#ifdef USE_MMX
+pixman_implementation_t *
+_pixman_implementation_create_mmx (void);
+#endif
+
+#ifdef USE_SSE2
+pixman_implementation_t *
+_pixman_implementation_create_sse2 (void);
+#endif
+
+#ifdef USE_ARM_SIMD
+pixman_implementation_t *
+_pixman_implementation_create_arm_simd (void);
+#endif
+
+#ifdef USE_ARM_NEON
+pixman_implementation_t *
+_pixman_implementation_create_arm_neon (void);
+#endif
+
+#ifdef USE_VMX
+pixman_implementation_t *
+_pixman_implementation_create_vmx (void);
+#endif
+
+pixman_implementation_t *
+_pixman_choose_implementation (void);
+
+
+
+/*
+ * Utilities
+ */
+
+/* These "formats" all have depth 0, so they
+ * will never clash with any real ones
+ */
+#define PIXMAN_null PIXMAN_FORMAT (0, 0, 0, 0, 0, 0)
+#define PIXMAN_solid PIXMAN_FORMAT (0, 1, 0, 0, 0, 0)
+#define PIXMAN_pixbuf PIXMAN_FORMAT (0, 2, 0, 0, 0, 0)
+#define PIXMAN_rpixbuf PIXMAN_FORMAT (0, 3, 0, 0, 0, 0)
+#define PIXMAN_unknown PIXMAN_FORMAT (0, 4, 0, 0, 0, 0)
+#define PIXMAN_any PIXMAN_FORMAT (0, 5, 0, 0, 0, 0)
+
+#define PIXMAN_OP_any (PIXMAN_N_OPERATORS + 1)
+
+#define FAST_PATH_ID_TRANSFORM (1 << 0)
+#define FAST_PATH_NO_ALPHA_MAP (1 << 1)
+#define FAST_PATH_NO_CONVOLUTION_FILTER (1 << 2)
+#define FAST_PATH_NO_PAD_REPEAT (1 << 3)
+#define FAST_PATH_NO_REFLECT_REPEAT (1 << 4)
+#define FAST_PATH_NO_ACCESSORS (1 << 5)
+#define FAST_PATH_NO_WIDE_FORMAT (1 << 6)
+#define FAST_PATH_COVERS_CLIP (1 << 7)
+#define FAST_PATH_COMPONENT_ALPHA (1 << 8)
+#define FAST_PATH_UNIFIED_ALPHA (1 << 9)
+#define FAST_PATH_SCALE_TRANSFORM (1 << 10)
+#define FAST_PATH_NEAREST_FILTER (1 << 11)
+#define FAST_PATH_SIMPLE_REPEAT (1 << 12)
+#define FAST_PATH_IS_OPAQUE (1 << 13)
+#define FAST_PATH_NEEDS_WORKAROUND (1 << 14)
+#define FAST_PATH_NO_NONE_REPEAT (1 << 15)
+#define FAST_PATH_SAMPLES_COVER_CLIP (1 << 16)
+#define FAST_PATH_16BIT_SAFE (1 << 17)
+#define FAST_PATH_X_UNIT_POSITIVE (1 << 18)
+
+#define _FAST_PATH_STANDARD_FLAGS \
+ (FAST_PATH_ID_TRANSFORM | \
+ FAST_PATH_NO_ALPHA_MAP | \
+ FAST_PATH_NO_CONVOLUTION_FILTER | \
+ FAST_PATH_NO_PAD_REPEAT | \
+ FAST_PATH_NO_REFLECT_REPEAT | \
+ FAST_PATH_NO_ACCESSORS | \
+ FAST_PATH_NO_WIDE_FORMAT | \
+ FAST_PATH_COVERS_CLIP)
+
+#define FAST_PATH_STD_SRC_FLAGS \
+ _FAST_PATH_STANDARD_FLAGS
+#define FAST_PATH_STD_MASK_U_FLAGS \
+ (_FAST_PATH_STANDARD_FLAGS | \
+ FAST_PATH_UNIFIED_ALPHA)
+#define FAST_PATH_STD_MASK_CA_FLAGS \
+ (_FAST_PATH_STANDARD_FLAGS | \
+ FAST_PATH_COMPONENT_ALPHA)
+#define FAST_PATH_STD_DEST_FLAGS \
+ (FAST_PATH_NO_ACCESSORS | \
+ FAST_PATH_NO_WIDE_FORMAT)
+
+#define FAST_PATH(op, src, src_flags, mask, mask_flags, dest, dest_flags, func) \
+ PIXMAN_OP_ ## op, \
+ PIXMAN_ ## src, \
+ src_flags, \
+ PIXMAN_ ## mask, \
+ mask_flags, \
+ PIXMAN_ ## dest, \
+ dest_flags, \
+ func
+
+#define PIXMAN_STD_FAST_PATH(op, src, mask, dest, func) \
+ { FAST_PATH ( \
+ op, \
+ src, FAST_PATH_STD_SRC_FLAGS, \
+ mask, (PIXMAN_ ## mask) ? FAST_PATH_STD_MASK_U_FLAGS : 0, \
+ dest, FAST_PATH_STD_DEST_FLAGS, \
+ func) }
+
+#define PIXMAN_STD_FAST_PATH_CA(op, src, mask, dest, func) \
+ { FAST_PATH ( \
+ op, \
+ src, FAST_PATH_STD_SRC_FLAGS, \
+ mask, FAST_PATH_STD_MASK_CA_FLAGS, \
+ dest, FAST_PATH_STD_DEST_FLAGS, \
+ func) }
+
+/* Memory allocation helpers */
+void *
+pixman_malloc_ab (unsigned int n, unsigned int b);
+
+void *
+pixman_malloc_abc (unsigned int a, unsigned int b, unsigned int c);
+
+pixman_bool_t
+pixman_multiply_overflows_int (unsigned int a, unsigned int b);
+
+pixman_bool_t
+pixman_addition_overflows_int (unsigned int a, unsigned int b);
+
+/* Compositing utilities */
+void
+pixman_expand (uint64_t * dst,
+ const uint32_t * src,
+ pixman_format_code_t format,
+ int width);
+
+void
+pixman_contract (uint32_t * dst,
+ const uint64_t *src,
+ int width);
+
+
+/* Region Helpers */
+pixman_bool_t
+pixman_region32_copy_from_region16 (pixman_region32_t *dst,
+ pixman_region16_t *src);
+
+pixman_bool_t
+pixman_region16_copy_from_region32 (pixman_region16_t *dst,
+ pixman_region32_t *src);
+
+
+/* Misc macros */
+
+#ifndef FALSE
+# define FALSE 0
+#endif
+
+#ifndef TRUE
+# define TRUE 1
+#endif
+
+#ifndef MIN
+# define MIN(a, b) ((a < b) ? a : b)
+#endif
+
+#ifndef MAX
+# define MAX(a, b) ((a > b) ? a : b)
+#endif
+
+/* Integer division that rounds towards -infinity */
+#define DIV(a, b) \
+ ((((a) < 0) == ((b) < 0)) ? (a) / (b) : \
+ ((a) - (b) + 1 - (((b) < 0) << 1)) / (b))
+
+/* Modulus that produces the remainder wrt. DIV */
+#define MOD(a, b) ((a) < 0 ? ((b) - ((-(a) - 1) % (b))) - 1 : (a) % (b))
+
+#define CLIP(v, low, high) ((v) < (low) ? (low) : ((v) > (high) ? (high) : (v)))
+
+/* Conversion between 8888 and 0565 */
+
+#define CONVERT_8888_TO_0565(s) \
+ ((((s) >> 3) & 0x001f) | \
+ (((s) >> 5) & 0x07e0) | \
+ (((s) >> 8) & 0xf800))
+
+#define CONVERT_0565_TO_0888(s) \
+ (((((s) << 3) & 0xf8) | (((s) >> 2) & 0x7)) | \
+ ((((s) << 5) & 0xfc00) | (((s) >> 1) & 0x300)) | \
+ ((((s) << 8) & 0xf80000) | (((s) << 3) & 0x70000)))
+
+#define CONVERT_0565_TO_8888(s) (CONVERT_0565_TO_0888(s) | 0xff000000)
+
+/* Trivial versions that are useful in macros */
+#define CONVERT_8888_TO_8888(s) (s)
+#define CONVERT_0565_TO_0565(s) (s)
+
+#define PIXMAN_FORMAT_IS_WIDE(f) \
+ (PIXMAN_FORMAT_A (f) > 8 || \
+ PIXMAN_FORMAT_R (f) > 8 || \
+ PIXMAN_FORMAT_G (f) > 8 || \
+ PIXMAN_FORMAT_B (f) > 8)
+
+#ifdef WORDS_BIGENDIAN
+# define SCREEN_SHIFT_LEFT(x,n) ((x) << (n))
+# define SCREEN_SHIFT_RIGHT(x,n) ((x) >> (n))
+#else
+# define SCREEN_SHIFT_LEFT(x,n) ((x) >> (n))
+# define SCREEN_SHIFT_RIGHT(x,n) ((x) << (n))
+#endif
+
+/*
+ * Various debugging code
+ */
+
+#undef DEBUG
+
+/* Turn on debugging depending on what type of release this is
+ */
+#if (((PIXMAN_VERSION_MICRO % 2) == 0) && ((PIXMAN_VERSION_MINOR % 2) == 1))
+
+/* Debugging gets turned on for development releases because these
+ * are the things that end up in bleeding edge distributions such
+ * as Rawhide etc.
+ *
+ * For performance reasons we don't turn it on for stable releases or
+ * random git checkouts. (Random git checkouts are often used for
+ * performance work).
+ */
+
+# define DEBUG
+
+#endif
+
+#ifdef DEBUG
+
+void
+_pixman_log_error (const char *function, const char *message);
+
+#define return_if_fail(expr) \
+ do \
+ { \
+ if (!(expr)) \
+ { \
+ _pixman_log_error (FUNC, "The expression " # expr " was false"); \
+ return; \
+ } \
+ } \
+ while (0)
+
+#define return_val_if_fail(expr, retval) \
+ do \
+ { \
+ if (!(expr)) \
+ { \
+ _pixman_log_error (FUNC, "The expression " # expr " was false"); \
+ return (retval); \
+ } \
+ } \
+ while (0)
+
+#define critical_if_fail(expr) \
+ do \
+ { \
+ if (!(expr)) \
+ _pixman_log_error (FUNC, "The expression " # expr " was false"); \
+ } \
+ while (0)
+
+
+#else
+
+#define _pixman_log_error(f,m) do { } while (0) \
+
+#define return_if_fail(expr) \
+ do \
+ { \
+ if (!(expr)) \
+ return; \
+ } \
+ while (0)
+
+#define return_val_if_fail(expr, retval) \
+ do \
+ { \
+ if (!(expr)) \
+ return (retval); \
+ } \
+ while (0)
+
+#define critical_if_fail(expr) \
+ do \
+ { \
+ } \
+ while (0)
+#endif
+
+/*
+ * Timers
+ */
+
+#ifdef PIXMAN_TIMERS
+
+static inline uint64_t
+oil_profile_stamp_rdtsc (void)
+{
+ uint64_t ts;
+
+ __asm__ __volatile__ ("rdtsc\n" : "=A" (ts));
+ return ts;
+}
+
+#define OIL_STAMP oil_profile_stamp_rdtsc
+
+typedef struct pixman_timer_t pixman_timer_t;
+
+struct pixman_timer_t
+{
+ int initialized;
+ const char * name;
+ uint64_t n_times;
+ uint64_t total;
+ pixman_timer_t *next;
+};
+
+extern int timer_defined;
+
+void pixman_timer_register (pixman_timer_t *timer);
+
+#define TIMER_BEGIN(tname) \
+ { \
+ static pixman_timer_t timer ## tname; \
+ uint64_t begin ## tname; \
+ \
+ if (!timer ## tname.initialized) \
+ { \
+ timer ## tname.initialized = 1; \
+ timer ## tname.name = # tname; \
+ pixman_timer_register (&timer ## tname); \
+ } \
+ \
+ timer ## tname.n_times++; \
+ begin ## tname = OIL_STAMP ();
+
+#define TIMER_END(tname) \
+ timer ## tname.total += OIL_STAMP () - begin ## tname; \
+ }
+
+#endif /* PIXMAN_TIMERS */
+
+#endif /* PIXMAN_PRIVATE_H */
diff --git a/pixman/pixman/pixman-radial-gradient.c b/pixman/pixman/pixman-radial-gradient.c index 022157b9b..6f00c4113 100644 --- a/pixman/pixman/pixman-radial-gradient.c +++ b/pixman/pixman/pixman-radial-gradient.c @@ -1,368 +1,365 @@ -/* - * - * Copyright © 2000 Keith Packard, member of The XFree86 Project, Inc. - * Copyright © 2000 SuSE, Inc. - * 2005 Lars Knoll & Zack Rusin, Trolltech - * Copyright © 2007 Red Hat, Inc. - * - * - * Permission to use, copy, modify, distribute, and sell this software and its - * documentation for any purpose is hereby granted without fee, provided that - * the above copyright notice appear in all copies and that both that - * copyright notice and this permission notice appear in supporting - * documentation, and that the name of Keith Packard not be used in - * advertising or publicity pertaining to distribution of the software without - * specific, written prior permission. Keith Packard makes no - * representations about the suitability of this software for any purpose. It - * is provided "as is" without express or implied warranty. - * - * THE COPYRIGHT HOLDERS DISCLAIM ALL WARRANTIES WITH REGARD TO THIS - * SOFTWARE, INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND - * FITNESS, IN NO EVENT SHALL THE COPYRIGHT HOLDERS BE LIABLE FOR ANY - * SPECIAL, INDIRECT OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES - * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN - * AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING - * OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS - * SOFTWARE. - */ - -#ifdef HAVE_CONFIG_H -#include <config.h> -#endif -#include <stdlib.h> -#include <math.h> -#include "pixman-private.h" - -static void -radial_gradient_get_scanline_32 (pixman_image_t *image, - int x, - int y, - int width, - uint32_t * buffer, - const uint32_t *mask, - uint32_t mask_bits) -{ - /* - * In the radial gradient problem we are given two circles (c₁,r₁) and - * (c₂,r₂) that define the gradient itself. Then, for any point p, we - * must compute the value(s) of t within [0.0, 1.0] representing the - * circle(s) that would color the point. - * - * There are potentially two values of t since the point p can be - * colored by both sides of the circle, (which happens whenever one - * circle is not entirely contained within the other). - * - * If we solve for a value of t that is outside of [0.0, 1.0] then we - * use the extend mode (NONE, REPEAT, REFLECT, or PAD) to map to a - * value within [0.0, 1.0]. - * - * Here is an illustration of the problem: - * - * p₂ - * p • - * • ╲ - * · ╲r₂ - * p₁ · ╲ - * • θ╲ - * ╲ ╌╌• - * ╲r₁ · c₂ - * θ╲ · - * ╌╌• - * c₁ - * - * Given (c₁,r₁), (c₂,r₂) and p, we must find an angle θ such that two - * points p₁ and p₂ on the two circles are collinear with p. Then, the - * desired value of t is the ratio of the length of p₁p to the length - * of p₁p₂. - * - * So, we have six unknown values: (p₁x, p₁y), (p₂x, p₂y), θ and t. - * We can also write six equations that constrain the problem: - * - * Point p₁ is a distance r₁ from c₁ at an angle of θ: - * - * 1. p₁x = c₁x + r₁·cos θ - * 2. p₁y = c₁y + r₁·sin θ - * - * Point p₂ is a distance r₂ from c₂ at an angle of θ: - * - * 3. p₂x = c₂x + r2·cos θ - * 4. p₂y = c₂y + r2·sin θ - * - * Point p lies at a fraction t along the line segment p₁p₂: - * - * 5. px = t·p₂x + (1-t)·p₁x - * 6. py = t·p₂y + (1-t)·p₁y - * - * To solve, first subtitute 1-4 into 5 and 6: - * - * px = t·(c₂x + r₂·cos θ) + (1-t)·(c₁x + r₁·cos θ) - * py = t·(c₂y + r₂·sin θ) + (1-t)·(c₁y + r₁·sin θ) - * - * Then solve each for cos θ and sin θ expressed as a function of t: - * - * cos θ = (-(c₂x - c₁x)·t + (px - c₁x)) / ((r₂-r₁)·t + r₁) - * sin θ = (-(c₂y - c₁y)·t + (py - c₁y)) / ((r₂-r₁)·t + r₁) - * - * To simplify this a bit, we define new variables for several of the - * common terms as shown below: - * - * p₂ - * p • - * • ╲ - * · ┆ ╲r₂ - * p₁ · ┆ ╲ - * • pdy┆ ╲ - * ╲ ┆ •c₂ - * ╲r₁ ┆ · ┆ - * ╲ ·┆ ┆cdy - * •╌╌╌╌┴╌╌╌╌╌╌╌┘ - * c₁ pdx cdx - * - * cdx = (c₂x - c₁x) - * cdy = (c₂y - c₁y) - * dr = r₂-r₁ - * pdx = px - c₁x - * pdy = py - c₁y - * - * Note that cdx, cdy, and dr do not depend on point p at all, so can - * be pre-computed for the entire gradient. The simplifed equations - * are now: - * - * cos θ = (-cdx·t + pdx) / (dr·t + r₁) - * sin θ = (-cdy·t + pdy) / (dr·t + r₁) - * - * Finally, to get a single function of t and eliminate the last - * unknown θ, we use the identity sin²θ + cos²θ = 1. First, square - * each equation, (we knew a quadratic was coming since it must be - * possible to obtain two solutions in some cases): - * - * cos²θ = (cdx²t² - 2·cdx·pdx·t + pdx²) / (dr²·t² + 2·r₁·dr·t + r₁²) - * sin²θ = (cdy²t² - 2·cdy·pdy·t + pdy²) / (dr²·t² + 2·r₁·dr·t + r₁²) - * - * Then add both together, set the result equal to 1, and express as a - * standard quadratic equation in t of the form At² + Bt + C = 0 - * - * (cdx² + cdy² - dr²)·t² - 2·(cdx·pdx + cdy·pdy + r₁·dr)·t + (pdx² + pdy² - r₁²) = 0 - * - * In other words: - * - * A = cdx² + cdy² - dr² - * B = -2·(pdx·cdx + pdy·cdy + r₁·dr) - * C = pdx² + pdy² - r₁² - * - * And again, notice that A does not depend on p, so can be - * precomputed. From here we just use the quadratic formula to solve - * for t: - * - * t = (-2·B ± ⎷(B² - 4·A·C)) / 2·A - */ - - gradient_t *gradient = (gradient_t *)image; - source_image_t *source = (source_image_t *)image; - radial_gradient_t *radial = (radial_gradient_t *)image; - uint32_t *end = buffer + width; - pixman_gradient_walker_t walker; - pixman_bool_t affine = TRUE; - double cx = 1.; - double cy = 0.; - double cz = 0.; - double rx = x + 0.5; - double ry = y + 0.5; - double rz = 1.; - - _pixman_gradient_walker_init (&walker, gradient, source->common.repeat); - - if (source->common.transform) - { - pixman_vector_t v; - /* reference point is the center of the pixel */ - v.vector[0] = pixman_int_to_fixed (x) + pixman_fixed_1 / 2; - v.vector[1] = pixman_int_to_fixed (y) + pixman_fixed_1 / 2; - v.vector[2] = pixman_fixed_1; - - if (!pixman_transform_point_3d (source->common.transform, &v)) - return; - - cx = source->common.transform->matrix[0][0] / 65536.; - cy = source->common.transform->matrix[1][0] / 65536.; - cz = source->common.transform->matrix[2][0] / 65536.; - - rx = v.vector[0] / 65536.; - ry = v.vector[1] / 65536.; - rz = v.vector[2] / 65536.; - - affine = - source->common.transform->matrix[2][0] == 0 && - v.vector[2] == pixman_fixed_1; - } - - if (affine) - { - /* When computing t over a scanline, we notice that some expressions - * are constant so we can compute them just once. Given: - * - * t = (-2·B ± ⎷(B² - 4·A·C)) / 2·A - * - * where - * - * A = cdx² + cdy² - dr² [precomputed as radial->A] - * B = -2·(pdx·cdx + pdy·cdy + r₁·dr) - * C = pdx² + pdy² - r₁² - * - * Since we have an affine transformation, we know that (pdx, pdy) - * increase linearly with each pixel, - * - * pdx = pdx₀ + n·cx, - * pdy = pdy₀ + n·cy, - * - * we can then express B in terms of an linear increment along - * the scanline: - * - * B = B₀ + n·cB, with - * B₀ = -2·(pdx₀·cdx + pdy₀·cdy + r₁·dr) and - * cB = -2·(cx·cdx + cy·cdy) - * - * Thus we can replace the full evaluation of B per-pixel (4 multiplies, - * 2 additions) with a single addition. - */ - double r1 = radial->c1.radius / 65536.; - double r1sq = r1 * r1; - double pdx = rx - radial->c1.x / 65536.; - double pdy = ry - radial->c1.y / 65536.; - double A = radial->A; - double invA = -65536. / (2. * A); - double A4 = -4. * A; - double B = -2. * (pdx*radial->cdx + pdy*radial->cdy + r1*radial->dr); - double cB = -2. * (cx*radial->cdx + cy*radial->cdy); - pixman_bool_t invert = A * radial->dr < 0; - - while (buffer < end) - { - if (!mask || *mask++ & mask_bits) - { - pixman_fixed_48_16_t t; - double det = B * B + A4 * (pdx * pdx + pdy * pdy - r1sq); - if (det <= 0.) - t = (pixman_fixed_48_16_t) (B * invA); - else if (invert) - t = (pixman_fixed_48_16_t) ((B + sqrt (det)) * invA); - else - t = (pixman_fixed_48_16_t) ((B - sqrt (det)) * invA); - - *buffer = _pixman_gradient_walker_pixel (&walker, t); - } - ++buffer; - - pdx += cx; - pdy += cy; - B += cB; - } - } - else - { - /* projective */ - while (buffer < end) - { - if (!mask || *mask++ & mask_bits) - { - double pdx, pdy; - double B, C; - double det; - double c1x = radial->c1.x / 65536.0; - double c1y = radial->c1.y / 65536.0; - double r1 = radial->c1.radius / 65536.0; - pixman_fixed_48_16_t t; - double x, y; - - if (rz != 0) - { - x = rx / rz; - y = ry / rz; - } - else - { - x = y = 0.; - } - - pdx = x - c1x; - pdy = y - c1y; - - B = -2 * (pdx * radial->cdx + - pdy * radial->cdy + - r1 * radial->dr); - C = (pdx * pdx + pdy * pdy - r1 * r1); - - det = (B * B) - (4 * radial->A * C); - if (det < 0.0) - det = 0.0; - - if (radial->A * radial->dr < 0) - t = (pixman_fixed_48_16_t) ((-B - sqrt (det)) / (2.0 * radial->A) * 65536); - else - t = (pixman_fixed_48_16_t) ((-B + sqrt (det)) / (2.0 * radial->A) * 65536); - - *buffer = _pixman_gradient_walker_pixel (&walker, t); - } - - ++buffer; - - rx += cx; - ry += cy; - rz += cz; - } - } -} - -static void -radial_gradient_property_changed (pixman_image_t *image) -{ - image->common.get_scanline_32 = radial_gradient_get_scanline_32; - image->common.get_scanline_64 = _pixman_image_get_scanline_generic_64; -} - -PIXMAN_EXPORT pixman_image_t * -pixman_image_create_radial_gradient (pixman_point_fixed_t * inner, - pixman_point_fixed_t * outer, - pixman_fixed_t inner_radius, - pixman_fixed_t outer_radius, - const pixman_gradient_stop_t *stops, - int n_stops) -{ - pixman_image_t *image; - radial_gradient_t *radial; - - return_val_if_fail (n_stops >= 2, NULL); - - image = _pixman_image_allocate (); - - if (!image) - return NULL; - - radial = &image->radial; - - if (!_pixman_init_gradient (&radial->common, stops, n_stops)) - { - free (image); - return NULL; - } - - image->type = RADIAL; - - radial->c1.x = inner->x; - radial->c1.y = inner->y; - radial->c1.radius = inner_radius; - radial->c2.x = outer->x; - radial->c2.y = outer->y; - radial->c2.radius = outer_radius; - radial->cdx = pixman_fixed_to_double (radial->c2.x - radial->c1.x); - radial->cdy = pixman_fixed_to_double (radial->c2.y - radial->c1.y); - radial->dr = pixman_fixed_to_double (radial->c2.radius - radial->c1.radius); - radial->A = (radial->cdx * radial->cdx + - radial->cdy * radial->cdy - - radial->dr * radial->dr); - - image->common.property_changed = radial_gradient_property_changed; - - return image; -} - +/*
+ *
+ * Copyright © 2000 Keith Packard, member of The XFree86 Project, Inc.
+ * Copyright © 2000 SuSE, Inc.
+ * 2005 Lars Knoll & Zack Rusin, Trolltech
+ * Copyright © 2007 Red Hat, Inc.
+ *
+ *
+ * Permission to use, copy, modify, distribute, and sell this software and its
+ * documentation for any purpose is hereby granted without fee, provided that
+ * the above copyright notice appear in all copies and that both that
+ * copyright notice and this permission notice appear in supporting
+ * documentation, and that the name of Keith Packard not be used in
+ * advertising or publicity pertaining to distribution of the software without
+ * specific, written prior permission. Keith Packard makes no
+ * representations about the suitability of this software for any purpose. It
+ * is provided "as is" without express or implied warranty.
+ *
+ * THE COPYRIGHT HOLDERS DISCLAIM ALL WARRANTIES WITH REGARD TO THIS
+ * SOFTWARE, INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND
+ * FITNESS, IN NO EVENT SHALL THE COPYRIGHT HOLDERS BE LIABLE FOR ANY
+ * SPECIAL, INDIRECT OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN
+ * AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING
+ * OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS
+ * SOFTWARE.
+ */
+
+#ifdef HAVE_CONFIG_H
+#include <config.h>
+#endif
+#include <stdlib.h>
+#include <math.h>
+#include "pixman-private.h"
+
+static void
+radial_gradient_get_scanline_32 (pixman_image_t *image,
+ int x,
+ int y,
+ int width,
+ uint32_t * buffer,
+ const uint32_t *mask)
+{
+ /*
+ * In the radial gradient problem we are given two circles (c₁,r₁) and
+ * (c₂,r₂) that define the gradient itself. Then, for any point p, we
+ * must compute the value(s) of t within [0.0, 1.0] representing the
+ * circle(s) that would color the point.
+ *
+ * There are potentially two values of t since the point p can be
+ * colored by both sides of the circle, (which happens whenever one
+ * circle is not entirely contained within the other).
+ *
+ * If we solve for a value of t that is outside of [0.0, 1.0] then we
+ * use the extend mode (NONE, REPEAT, REFLECT, or PAD) to map to a
+ * value within [0.0, 1.0].
+ *
+ * Here is an illustration of the problem:
+ *
+ * p₂
+ * p •
+ * • ╲
+ * · ╲r₂
+ * p₁ · ╲
+ * • θ╲
+ * ╲ ╌╌•
+ * ╲r₁ · c₂
+ * θ╲ ·
+ * ╌╌•
+ * c₁
+ *
+ * Given (c₁,r₁), (c₂,r₂) and p, we must find an angle θ such that two
+ * points p₁ and p₂ on the two circles are collinear with p. Then, the
+ * desired value of t is the ratio of the length of p₁p to the length
+ * of p₁p₂.
+ *
+ * So, we have six unknown values: (p₁x, p₁y), (p₂x, p₂y), θ and t.
+ * We can also write six equations that constrain the problem:
+ *
+ * Point p₁ is a distance r₁ from c₁ at an angle of θ:
+ *
+ * 1. p₁x = c₁x + r₁·cos θ
+ * 2. p₁y = c₁y + r₁·sin θ
+ *
+ * Point p₂ is a distance r₂ from c₂ at an angle of θ:
+ *
+ * 3. p₂x = c₂x + r2·cos θ
+ * 4. p₂y = c₂y + r2·sin θ
+ *
+ * Point p lies at a fraction t along the line segment p₁p₂:
+ *
+ * 5. px = t·p₂x + (1-t)·p₁x
+ * 6. py = t·p₂y + (1-t)·p₁y
+ *
+ * To solve, first subtitute 1-4 into 5 and 6:
+ *
+ * px = t·(c₂x + r₂·cos θ) + (1-t)·(c₁x + r₁·cos θ)
+ * py = t·(c₂y + r₂·sin θ) + (1-t)·(c₁y + r₁·sin θ)
+ *
+ * Then solve each for cos θ and sin θ expressed as a function of t:
+ *
+ * cos θ = (-(c₂x - c₁x)·t + (px - c₁x)) / ((r₂-r₁)·t + r₁)
+ * sin θ = (-(c₂y - c₁y)·t + (py - c₁y)) / ((r₂-r₁)·t + r₁)
+ *
+ * To simplify this a bit, we define new variables for several of the
+ * common terms as shown below:
+ *
+ * p₂
+ * p •
+ * • ╲
+ * · ┆ ╲r₂
+ * p₁ · ┆ ╲
+ * • pdy┆ ╲
+ * ╲ ┆ •c₂
+ * ╲r₁ ┆ · ┆
+ * ╲ ·┆ ┆cdy
+ * •╌╌╌╌┴╌╌╌╌╌╌╌┘
+ * c₁ pdx cdx
+ *
+ * cdx = (c₂x - c₁x)
+ * cdy = (c₂y - c₁y)
+ * dr = r₂-r₁
+ * pdx = px - c₁x
+ * pdy = py - c₁y
+ *
+ * Note that cdx, cdy, and dr do not depend on point p at all, so can
+ * be pre-computed for the entire gradient. The simplifed equations
+ * are now:
+ *
+ * cos θ = (-cdx·t + pdx) / (dr·t + r₁)
+ * sin θ = (-cdy·t + pdy) / (dr·t + r₁)
+ *
+ * Finally, to get a single function of t and eliminate the last
+ * unknown θ, we use the identity sin²θ + cos²θ = 1. First, square
+ * each equation, (we knew a quadratic was coming since it must be
+ * possible to obtain two solutions in some cases):
+ *
+ * cos²θ = (cdx²t² - 2·cdx·pdx·t + pdx²) / (dr²·t² + 2·r₁·dr·t + r₁²)
+ * sin²θ = (cdy²t² - 2·cdy·pdy·t + pdy²) / (dr²·t² + 2·r₁·dr·t + r₁²)
+ *
+ * Then add both together, set the result equal to 1, and express as a
+ * standard quadratic equation in t of the form At² + Bt + C = 0
+ *
+ * (cdx² + cdy² - dr²)·t² - 2·(cdx·pdx + cdy·pdy + r₁·dr)·t + (pdx² + pdy² - r₁²) = 0
+ *
+ * In other words:
+ *
+ * A = cdx² + cdy² - dr²
+ * B = -2·(pdx·cdx + pdy·cdy + r₁·dr)
+ * C = pdx² + pdy² - r₁²
+ *
+ * And again, notice that A does not depend on p, so can be
+ * precomputed. From here we just use the quadratic formula to solve
+ * for t:
+ *
+ * t = (-2·B ± ⎷(B² - 4·A·C)) / 2·A
+ */
+
+ gradient_t *gradient = (gradient_t *)image;
+ source_image_t *source = (source_image_t *)image;
+ radial_gradient_t *radial = (radial_gradient_t *)image;
+ uint32_t *end = buffer + width;
+ pixman_gradient_walker_t walker;
+ pixman_bool_t affine = TRUE;
+ double cx = 1.;
+ double cy = 0.;
+ double cz = 0.;
+ double rx = x + 0.5;
+ double ry = y + 0.5;
+ double rz = 1.;
+
+ _pixman_gradient_walker_init (&walker, gradient, source->common.repeat);
+
+ if (source->common.transform)
+ {
+ pixman_vector_t v;
+ /* reference point is the center of the pixel */
+ v.vector[0] = pixman_int_to_fixed (x) + pixman_fixed_1 / 2;
+ v.vector[1] = pixman_int_to_fixed (y) + pixman_fixed_1 / 2;
+ v.vector[2] = pixman_fixed_1;
+
+ if (!pixman_transform_point_3d (source->common.transform, &v))
+ return;
+
+ cx = source->common.transform->matrix[0][0] / 65536.;
+ cy = source->common.transform->matrix[1][0] / 65536.;
+ cz = source->common.transform->matrix[2][0] / 65536.;
+
+ rx = v.vector[0] / 65536.;
+ ry = v.vector[1] / 65536.;
+ rz = v.vector[2] / 65536.;
+
+ affine =
+ source->common.transform->matrix[2][0] == 0 &&
+ v.vector[2] == pixman_fixed_1;
+ }
+
+ if (affine)
+ {
+ /* When computing t over a scanline, we notice that some expressions
+ * are constant so we can compute them just once. Given:
+ *
+ * t = (-2·B ± ⎷(B² - 4·A·C)) / 2·A
+ *
+ * where
+ *
+ * A = cdx² + cdy² - dr² [precomputed as radial->A]
+ * B = -2·(pdx·cdx + pdy·cdy + r₁·dr)
+ * C = pdx² + pdy² - r₁²
+ *
+ * Since we have an affine transformation, we know that (pdx, pdy)
+ * increase linearly with each pixel,
+ *
+ * pdx = pdx₀ + n·cx,
+ * pdy = pdy₀ + n·cy,
+ *
+ * we can then express B in terms of an linear increment along
+ * the scanline:
+ *
+ * B = B₀ + n·cB, with
+ * B₀ = -2·(pdx₀·cdx + pdy₀·cdy + r₁·dr) and
+ * cB = -2·(cx·cdx + cy·cdy)
+ *
+ * Thus we can replace the full evaluation of B per-pixel (4 multiplies,
+ * 2 additions) with a single addition.
+ */
+ double r1 = radial->c1.radius / 65536.;
+ double r1sq = r1 * r1;
+ double pdx = rx - radial->c1.x / 65536.;
+ double pdy = ry - radial->c1.y / 65536.;
+ double A = radial->A;
+ double invA = -65536. / (2. * A);
+ double A4 = -4. * A;
+ double B = -2. * (pdx*radial->cdx + pdy*radial->cdy + r1*radial->dr);
+ double cB = -2. * (cx*radial->cdx + cy*radial->cdy);
+ pixman_bool_t invert = A * radial->dr < 0;
+
+ while (buffer < end)
+ {
+ if (!mask || *mask++)
+ {
+ pixman_fixed_48_16_t t;
+ double det = B * B + A4 * (pdx * pdx + pdy * pdy - r1sq);
+ if (det <= 0.)
+ t = (pixman_fixed_48_16_t) (B * invA);
+ else if (invert)
+ t = (pixman_fixed_48_16_t) ((B + sqrt (det)) * invA);
+ else
+ t = (pixman_fixed_48_16_t) ((B - sqrt (det)) * invA);
+
+ *buffer = _pixman_gradient_walker_pixel (&walker, t);
+ }
+ ++buffer;
+
+ pdx += cx;
+ pdy += cy;
+ B += cB;
+ }
+ }
+ else
+ {
+ /* projective */
+ while (buffer < end)
+ {
+ if (!mask || *mask++)
+ {
+ double pdx, pdy;
+ double B, C;
+ double det;
+ double c1x = radial->c1.x / 65536.0;
+ double c1y = radial->c1.y / 65536.0;
+ double r1 = radial->c1.radius / 65536.0;
+ pixman_fixed_48_16_t t;
+ double x, y;
+
+ if (rz != 0)
+ {
+ x = rx / rz;
+ y = ry / rz;
+ }
+ else
+ {
+ x = y = 0.;
+ }
+
+ pdx = x - c1x;
+ pdy = y - c1y;
+
+ B = -2 * (pdx * radial->cdx +
+ pdy * radial->cdy +
+ r1 * radial->dr);
+ C = (pdx * pdx + pdy * pdy - r1 * r1);
+
+ det = (B * B) - (4 * radial->A * C);
+ if (det < 0.0)
+ det = 0.0;
+
+ if (radial->A * radial->dr < 0)
+ t = (pixman_fixed_48_16_t) ((-B - sqrt (det)) / (2.0 * radial->A) * 65536);
+ else
+ t = (pixman_fixed_48_16_t) ((-B + sqrt (det)) / (2.0 * radial->A) * 65536);
+
+ *buffer = _pixman_gradient_walker_pixel (&walker, t);
+ }
+
+ ++buffer;
+
+ rx += cx;
+ ry += cy;
+ rz += cz;
+ }
+ }
+}
+
+static void
+radial_gradient_property_changed (pixman_image_t *image)
+{
+ image->common.get_scanline_32 = radial_gradient_get_scanline_32;
+ image->common.get_scanline_64 = _pixman_image_get_scanline_generic_64;
+}
+
+PIXMAN_EXPORT pixman_image_t *
+pixman_image_create_radial_gradient (pixman_point_fixed_t * inner,
+ pixman_point_fixed_t * outer,
+ pixman_fixed_t inner_radius,
+ pixman_fixed_t outer_radius,
+ const pixman_gradient_stop_t *stops,
+ int n_stops)
+{
+ pixman_image_t *image;
+ radial_gradient_t *radial;
+
+ image = _pixman_image_allocate ();
+
+ if (!image)
+ return NULL;
+
+ radial = &image->radial;
+
+ if (!_pixman_init_gradient (&radial->common, stops, n_stops))
+ {
+ free (image);
+ return NULL;
+ }
+
+ image->type = RADIAL;
+
+ radial->c1.x = inner->x;
+ radial->c1.y = inner->y;
+ radial->c1.radius = inner_radius;
+ radial->c2.x = outer->x;
+ radial->c2.y = outer->y;
+ radial->c2.radius = outer_radius;
+ radial->cdx = pixman_fixed_to_double (radial->c2.x - radial->c1.x);
+ radial->cdy = pixman_fixed_to_double (radial->c2.y - radial->c1.y);
+ radial->dr = pixman_fixed_to_double (radial->c2.radius - radial->c1.radius);
+ radial->A = (radial->cdx * radial->cdx +
+ radial->cdy * radial->cdy -
+ radial->dr * radial->dr);
+
+ image->common.property_changed = radial_gradient_property_changed;
+
+ return image;
+}
+
diff --git a/pixman/pixman/pixman-region.c b/pixman/pixman/pixman-region.c index a6a400581..4f694b63b 100644 --- a/pixman/pixman/pixman-region.c +++ b/pixman/pixman/pixman-region.c @@ -1,2751 +1,2769 @@ -/* - * Copyright 1987, 1988, 1989, 1998 The Open Group - * - * Permission to use, copy, modify, distribute, and sell this software and its - * documentation for any purpose is hereby granted without fee, provided that - * the above copyright notice appear in all copies and that both that - * copyright notice and this permission notice appear in supporting - * documentation. - * - * The above copyright notice and this permission notice shall be included in - * all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR - * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, - * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE - * OPEN GROUP BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN - * AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN - * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. - * - * Except as contained in this notice, the name of The Open Group shall not be - * used in advertising or otherwise to promote the sale, use or other dealings - * in this Software without prior written authorization from The Open Group. - * - * Copyright 1987, 1988, 1989 by - * Digital Equipment Corporation, Maynard, Massachusetts. - * - * All Rights Reserved - * - * Permission to use, copy, modify, and distribute this software and its - * documentation for any purpose and without fee is hereby granted, - * provided that the above copyright notice appear in all copies and that - * both that copyright notice and this permission notice appear in - * supporting documentation, and that the name of Digital not be - * used in advertising or publicity pertaining to distribution of the - * software without specific, written prior permission. - * - * DIGITAL DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE, INCLUDING - * ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO EVENT SHALL - * DIGITAL BE LIABLE FOR ANY SPECIAL, INDIRECT OR CONSEQUENTIAL DAMAGES OR - * ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, - * WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, - * ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS - * SOFTWARE. - * - * Copyright © 1998 Keith Packard - * - * Permission to use, copy, modify, distribute, and sell this software and its - * documentation for any purpose is hereby granted without fee, provided that - * the above copyright notice appear in all copies and that both that - * copyright notice and this permission notice appear in supporting - * documentation, and that the name of Keith Packard not be used in - * advertising or publicity pertaining to distribution of the software without - * specific, written prior permission. Keith Packard makes no - * representations about the suitability of this software for any purpose. It - * is provided "as is" without express or implied warranty. - * - * KEITH PACKARD DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE, - * INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO - * EVENT SHALL KEITH PACKARD BE LIABLE FOR ANY SPECIAL, INDIRECT OR - * CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, - * DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER - * TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR - * PERFORMANCE OF THIS SOFTWARE. - */ - -#include <stdlib.h> -#include <limits.h> -#include <string.h> -#include <stdio.h> -#include "pixman-private.h" - -#define PIXREGION_NIL(reg) ((reg)->data && !(reg)->data->numRects) -/* not a region */ -#define PIXREGION_NAR(reg) ((reg)->data == pixman_broken_data) -#define PIXREGION_NUMRECTS(reg) ((reg)->data ? (reg)->data->numRects : 1) -#define PIXREGION_SIZE(reg) ((reg)->data ? (reg)->data->size : 0) -#define PIXREGION_RECTS(reg) \ - ((reg)->data ? (box_type_t *)((reg)->data + 1) \ - : &(reg)->extents) -#define PIXREGION_BOXPTR(reg) ((box_type_t *)((reg)->data + 1)) -#define PIXREGION_BOX(reg, i) (&PIXREGION_BOXPTR (reg)[i]) -#define PIXREGION_TOP(reg) PIXREGION_BOX (reg, (reg)->data->numRects) -#define PIXREGION_END(reg) PIXREGION_BOX (reg, (reg)->data->numRects - 1) - -#define GOOD_RECT(rect) ((rect)->x1 < (rect)->x2 && (rect)->y1 < (rect)->y2) -#define BAD_RECT(rect) ((rect)->x1 > (rect)->x2 || (rect)->y1 > (rect)->y2) - -#ifdef DEBUG - -#define GOOD(reg) \ - do \ - { \ - if (!PREFIX (_selfcheck (reg))) \ - _pixman_log_error (FUNC, "Malformed region " # reg); \ - } while (0) - -#else - -#define GOOD(reg) - -#endif - -static const box_type_t PREFIX (_empty_box_) = { 0, 0, 0, 0 }; -static const region_data_type_t PREFIX (_empty_data_) = { 0, 0 }; -static const region_data_type_t PREFIX (_broken_data_) = { 0, 0 }; - -static box_type_t *pixman_region_empty_box = - (box_type_t *)&PREFIX (_empty_box_); -static region_data_type_t *pixman_region_empty_data = - (region_data_type_t *)&PREFIX (_empty_data_); -static region_data_type_t *pixman_broken_data = - (region_data_type_t *)&PREFIX (_broken_data_); - -static pixman_bool_t -pixman_break (region_type_t *region); - -/* - * The functions in this file implement the Region abstraction used extensively - * throughout the X11 sample server. A Region is simply a set of disjoint - * (non-overlapping) rectangles, plus an "extent" rectangle which is the - * smallest single rectangle that contains all the non-overlapping rectangles. - * - * A Region is implemented as a "y-x-banded" array of rectangles. This array - * imposes two degrees of order. First, all rectangles are sorted by top side - * y coordinate first (y1), and then by left side x coordinate (x1). - * - * Furthermore, the rectangles are grouped into "bands". Each rectangle in a - * band has the same top y coordinate (y1), and each has the same bottom y - * coordinate (y2). Thus all rectangles in a band differ only in their left - * and right side (x1 and x2). Bands are implicit in the array of rectangles: - * there is no separate list of band start pointers. - * - * The y-x band representation does not minimize rectangles. In particular, - * if a rectangle vertically crosses a band (the rectangle has scanlines in - * the y1 to y2 area spanned by the band), then the rectangle may be broken - * down into two or more smaller rectangles stacked one atop the other. - * - * ----------- ----------- - * | | | | band 0 - * | | -------- ----------- -------- - * | | | | in y-x banded | | | | band 1 - * | | | | form is | | | | - * ----------- | | ----------- -------- - * | | | | band 2 - * -------- -------- - * - * An added constraint on the rectangles is that they must cover as much - * horizontal area as possible: no two rectangles within a band are allowed - * to touch. - * - * Whenever possible, bands will be merged together to cover a greater vertical - * distance (and thus reduce the number of rectangles). Two bands can be merged - * only if the bottom of one touches the top of the other and they have - * rectangles in the same places (of the same width, of course). - * - * Adam de Boor wrote most of the original region code. Joel McCormack - * substantially modified or rewrote most of the core arithmetic routines, and - * added pixman_region_validate in order to support several speed improvements - * to pixman_region_validate_tree. Bob Scheifler changed the representation - * to be more compact when empty or a single rectangle, and did a bunch of - * gratuitous reformatting. Carl Worth did further gratuitous reformatting - * while re-merging the server and client region code into libpixregion. - * Soren Sandmann did even more gratuitous reformatting. - */ - -/* true iff two Boxes overlap */ -#define EXTENTCHECK(r1, r2) \ - (!( ((r1)->x2 <= (r2)->x1) || \ - ((r1)->x1 >= (r2)->x2) || \ - ((r1)->y2 <= (r2)->y1) || \ - ((r1)->y1 >= (r2)->y2) ) ) - -/* true iff (x,y) is in Box */ -#define INBOX(r, x, y) \ - ( ((r)->x2 > x) && \ - ((r)->x1 <= x) && \ - ((r)->y2 > y) && \ - ((r)->y1 <= y) ) - -/* true iff Box r1 contains Box r2 */ -#define SUBSUMES(r1, r2) \ - ( ((r1)->x1 <= (r2)->x1) && \ - ((r1)->x2 >= (r2)->x2) && \ - ((r1)->y1 <= (r2)->y1) && \ - ((r1)->y2 >= (r2)->y2) ) - -static size_t -PIXREGION_SZOF (size_t n) -{ - size_t size = n * sizeof(box_type_t); - - if (n > UINT32_MAX / sizeof(box_type_t)) - return 0; - - if (sizeof(region_data_type_t) > UINT32_MAX - size) - return 0; - - return size + sizeof(region_data_type_t); -} - -static void * -alloc_data (size_t n) -{ - size_t sz = PIXREGION_SZOF (n); - - if (!sz) - return NULL; - - return malloc (sz); -} - -#define FREE_DATA(reg) if ((reg)->data && (reg)->data->size) free ((reg)->data) - -#define RECTALLOC_BAIL(region, n, bail) \ - do \ - { \ - if (!(region)->data || \ - (((region)->data->numRects + (n)) > (region)->data->size)) \ - { \ - if (!pixman_rect_alloc (region, n)) \ - goto bail; \ - } \ - } while (0) - -#define RECTALLOC(region, n) \ - do \ - { \ - if (!(region)->data || \ - (((region)->data->numRects + (n)) > (region)->data->size)) \ - { \ - if (!pixman_rect_alloc (region, n)) { \ - return FALSE; \ - } \ - } \ - } while (0) - -#define ADDRECT(next_rect, nx1, ny1, nx2, ny2) \ - do \ - { \ - next_rect->x1 = nx1; \ - next_rect->y1 = ny1; \ - next_rect->x2 = nx2; \ - next_rect->y2 = ny2; \ - next_rect++; \ - } \ - while (0) - -#define NEWRECT(region, next_rect, nx1, ny1, nx2, ny2) \ - do \ - { \ - if (!(region)->data || \ - ((region)->data->numRects == (region)->data->size)) \ - { \ - if (!pixman_rect_alloc (region, 1)) \ - return FALSE; \ - next_rect = PIXREGION_TOP (region); \ - } \ - ADDRECT (next_rect, nx1, ny1, nx2, ny2); \ - region->data->numRects++; \ - critical_if_fail (region->data->numRects <= region->data->size); \ - } while (0) - -#define DOWNSIZE(reg, numRects) \ - do \ - { \ - if (((numRects) < ((reg)->data->size >> 1)) && \ - ((reg)->data->size > 50)) \ - { \ - region_data_type_t * new_data; \ - size_t data_size = PIXREGION_SZOF (numRects); \ - \ - if (!data_size) \ - { \ - new_data = NULL; \ - } \ - else \ - { \ - new_data = (region_data_type_t *) \ - realloc ((reg)->data, data_size); \ - } \ - \ - if (new_data) \ - { \ - new_data->size = (numRects); \ - (reg)->data = new_data; \ - } \ - } \ - } while (0) - -PIXMAN_EXPORT pixman_bool_t -PREFIX (_equal) (region_type_t *reg1, region_type_t *reg2) -{ - int i; - box_type_t *rects1; - box_type_t *rects2; - - if (reg1->extents.x1 != reg2->extents.x1) - return FALSE; - - if (reg1->extents.x2 != reg2->extents.x2) - return FALSE; - - if (reg1->extents.y1 != reg2->extents.y1) - return FALSE; - - if (reg1->extents.y2 != reg2->extents.y2) - return FALSE; - - if (PIXREGION_NUMRECTS (reg1) != PIXREGION_NUMRECTS (reg2)) - return FALSE; - - rects1 = PIXREGION_RECTS (reg1); - rects2 = PIXREGION_RECTS (reg2); - - for (i = 0; i != PIXREGION_NUMRECTS (reg1); i++) - { - if (rects1[i].x1 != rects2[i].x1) - return FALSE; - - if (rects1[i].x2 != rects2[i].x2) - return FALSE; - - if (rects1[i].y1 != rects2[i].y1) - return FALSE; - - if (rects1[i].y2 != rects2[i].y2) - return FALSE; - } - - return TRUE; -} - -int -PREFIX (_print) (region_type_t *rgn) -{ - int num, size; - int i; - box_type_t * rects; - - num = PIXREGION_NUMRECTS (rgn); - size = PIXREGION_SIZE (rgn); - rects = PIXREGION_RECTS (rgn); - - fprintf (stderr, "num: %d size: %d\n", num, size); - fprintf (stderr, "extents: %d %d %d %d\n", - rgn->extents.x1, - rgn->extents.y1, - rgn->extents.x2, - rgn->extents.y2); - - for (i = 0; i < num; i++) - { - fprintf (stderr, "%d %d %d %d \n", - rects[i].x1, rects[i].y1, rects[i].x2, rects[i].y2); - } - - fprintf (stderr, "\n"); - - return(num); -} - - -PIXMAN_EXPORT void -PREFIX (_init) (region_type_t *region) -{ - region->extents = *pixman_region_empty_box; - region->data = pixman_region_empty_data; -} - -PIXMAN_EXPORT void -PREFIX (_init_rect) (region_type_t * region, - int x, - int y, - unsigned int width, - unsigned int height) -{ - region->extents.x1 = x; - region->extents.y1 = y; - region->extents.x2 = x + width; - region->extents.y2 = y + height; - - if (!GOOD_RECT (®ion->extents)) - { - if (BAD_RECT (®ion->extents)) - _pixman_log_error (FUNC, "Invalid rectangle passed"); - PREFIX (_init) (region); - return; - } - - region->data = NULL; -} - -PIXMAN_EXPORT void -PREFIX (_init_with_extents) (region_type_t *region, box_type_t *extents) -{ - if (!GOOD_RECT (extents)) - { - if (BAD_RECT (extents)) - _pixman_log_error (FUNC, "Invalid rectangle passed"); - PREFIX (_init) (region); - return; - } - region->extents = *extents; - - region->data = NULL; -} - -PIXMAN_EXPORT void -PREFIX (_fini) (region_type_t *region) -{ - GOOD (region); - FREE_DATA (region); -} - -PIXMAN_EXPORT int -PREFIX (_n_rects) (region_type_t *region) -{ - return PIXREGION_NUMRECTS (region); -} - -PIXMAN_EXPORT box_type_t * -PREFIX (_rectangles) (region_type_t *region, - int *n_rects) -{ - if (n_rects) - *n_rects = PIXREGION_NUMRECTS (region); - - return PIXREGION_RECTS (region); -} - -static pixman_bool_t -pixman_break (region_type_t *region) -{ - FREE_DATA (region); - - region->extents = *pixman_region_empty_box; - region->data = pixman_broken_data; - - return FALSE; -} - -static pixman_bool_t -pixman_rect_alloc (region_type_t * region, - int n) -{ - region_data_type_t *data; - - if (!region->data) - { - n++; - region->data = alloc_data (n); - - if (!region->data) - return pixman_break (region); - - region->data->numRects = 1; - *PIXREGION_BOXPTR (region) = region->extents; - } - else if (!region->data->size) - { - region->data = alloc_data (n); - - if (!region->data) - return pixman_break (region); - - region->data->numRects = 0; - } - else - { - size_t data_size; - - if (n == 1) - { - n = region->data->numRects; - if (n > 500) /* XXX pick numbers out of a hat */ - n = 250; - } - - n += region->data->numRects; - data_size = PIXREGION_SZOF (n); - - if (!data_size) - { - data = NULL; - } - else - { - data = (region_data_type_t *) - realloc (region->data, PIXREGION_SZOF (n)); - } - - if (!data) - return pixman_break (region); - - region->data = data; - } - - region->data->size = n; - - return TRUE; -} - -PIXMAN_EXPORT pixman_bool_t -PREFIX (_copy) (region_type_t *dst, region_type_t *src) -{ - GOOD (dst); - GOOD (src); - - if (dst == src) - return TRUE; - - dst->extents = src->extents; - - if (!src->data || !src->data->size) - { - FREE_DATA (dst); - dst->data = src->data; - return TRUE; - } - - if (!dst->data || (dst->data->size < src->data->numRects)) - { - FREE_DATA (dst); - - dst->data = alloc_data (src->data->numRects); - - if (!dst->data) - return pixman_break (dst); - - dst->data->size = src->data->numRects; - } - - dst->data->numRects = src->data->numRects; - - memmove ((char *)PIXREGION_BOXPTR (dst), (char *)PIXREGION_BOXPTR (src), - dst->data->numRects * sizeof(box_type_t)); - - return TRUE; -} - -/*====================================================================== - * Generic Region Operator - *====================================================================*/ - -/*- - *----------------------------------------------------------------------- - * pixman_coalesce -- - * Attempt to merge the boxes in the current band with those in the - * previous one. We are guaranteed that the current band extends to - * the end of the rects array. Used only by pixman_op. - * - * Results: - * The new index for the previous band. - * - * Side Effects: - * If coalescing takes place: - * - rectangles in the previous band will have their y2 fields - * altered. - * - region->data->numRects will be decreased. - * - *----------------------------------------------------------------------- - */ -static inline int -pixman_coalesce (region_type_t * region, /* Region to coalesce */ - int prev_start, /* Index of start of previous band */ - int cur_start) /* Index of start of current band */ -{ - box_type_t *prev_box; /* Current box in previous band */ - box_type_t *cur_box; /* Current box in current band */ - int numRects; /* Number rectangles in both bands */ - int y2; /* Bottom of current band */ - - /* - * Figure out how many rectangles are in the band. - */ - numRects = cur_start - prev_start; - critical_if_fail (numRects == region->data->numRects - cur_start); - - if (!numRects) return cur_start; - - /* - * The bands may only be coalesced if the bottom of the previous - * matches the top scanline of the current. - */ - prev_box = PIXREGION_BOX (region, prev_start); - cur_box = PIXREGION_BOX (region, cur_start); - if (prev_box->y2 != cur_box->y1) return cur_start; - - /* - * Make sure the bands have boxes in the same places. This - * assumes that boxes have been added in such a way that they - * cover the most area possible. I.e. two boxes in a band must - * have some horizontal space between them. - */ - y2 = cur_box->y2; - - do - { - if ((prev_box->x1 != cur_box->x1) || (prev_box->x2 != cur_box->x2)) - return (cur_start); - - prev_box++; - cur_box++; - numRects--; - } - while (numRects); - - /* - * The bands may be merged, so set the bottom y of each box - * in the previous band to the bottom y of the current band. - */ - numRects = cur_start - prev_start; - region->data->numRects -= numRects; - - do - { - prev_box--; - prev_box->y2 = y2; - numRects--; - } - while (numRects); - - return prev_start; -} - -/* Quicky macro to avoid trivial reject procedure calls to pixman_coalesce */ - -#define COALESCE(new_reg, prev_band, cur_band) \ - do \ - { \ - if (cur_band - prev_band == new_reg->data->numRects - cur_band) \ - prev_band = pixman_coalesce (new_reg, prev_band, cur_band); \ - else \ - prev_band = cur_band; \ - } while (0) - -/*- - *----------------------------------------------------------------------- - * pixman_region_append_non_o -- - * Handle a non-overlapping band for the union and subtract operations. - * Just adds the (top/bottom-clipped) rectangles into the region. - * Doesn't have to check for subsumption or anything. - * - * Results: - * None. - * - * Side Effects: - * region->data->numRects is incremented and the rectangles overwritten - * with the rectangles we're passed. - * - *----------------------------------------------------------------------- - */ -static inline pixman_bool_t -pixman_region_append_non_o (region_type_t * region, - box_type_t * r, - box_type_t * r_end, - int y1, - int y2) -{ - box_type_t *next_rect; - int new_rects; - - new_rects = r_end - r; - - critical_if_fail (y1 < y2); - critical_if_fail (new_rects != 0); - - /* Make sure we have enough space for all rectangles to be added */ - RECTALLOC (region, new_rects); - next_rect = PIXREGION_TOP (region); - region->data->numRects += new_rects; - - do - { - critical_if_fail (r->x1 < r->x2); - ADDRECT (next_rect, r->x1, y1, r->x2, y2); - r++; - } - while (r != r_end); - - return TRUE; -} - -#define FIND_BAND(r, r_band_end, r_end, ry1) \ - do \ - { \ - ry1 = r->y1; \ - r_band_end = r + 1; \ - while ((r_band_end != r_end) && (r_band_end->y1 == ry1)) { \ - r_band_end++; \ - } \ - } while (0) - -#define APPEND_REGIONS(new_reg, r, r_end) \ - do \ - { \ - int new_rects; \ - if ((new_rects = r_end - r)) { \ - RECTALLOC_BAIL (new_reg, new_rects, bail); \ - memmove ((char *)PIXREGION_TOP (new_reg), (char *)r, \ - new_rects * sizeof(box_type_t)); \ - new_reg->data->numRects += new_rects; \ - } \ - } while (0) - -/*- - *----------------------------------------------------------------------- - * pixman_op -- - * Apply an operation to two regions. Called by pixman_region_union, pixman_region_inverse, - * pixman_region_subtract, pixman_region_intersect.... Both regions MUST have at least one - * rectangle, and cannot be the same object. - * - * Results: - * TRUE if successful. - * - * Side Effects: - * The new region is overwritten. - * overlap set to TRUE if overlap_func ever returns TRUE. - * - * Notes: - * The idea behind this function is to view the two regions as sets. - * Together they cover a rectangle of area that this function divides - * into horizontal bands where points are covered only by one region - * or by both. For the first case, the non_overlap_func is called with - * each the band and the band's upper and lower extents. For the - * second, the overlap_func is called to process the entire band. It - * is responsible for clipping the rectangles in the band, though - * this function provides the boundaries. - * At the end of each band, the new region is coalesced, if possible, - * to reduce the number of rectangles in the region. - * - *----------------------------------------------------------------------- - */ - -typedef pixman_bool_t (*overlap_proc_ptr) (region_type_t *region, - box_type_t * r1, - box_type_t * r1_end, - box_type_t * r2, - box_type_t * r2_end, - int y1, - int y2, - int * overlap); - -static pixman_bool_t -pixman_op (region_type_t * new_reg, /* Place to store result */ - region_type_t * reg1, /* First region in operation */ - region_type_t * reg2, /* 2d region in operation */ - overlap_proc_ptr overlap_func, /* Function to call for over- - * lapping bands */ - int append_non1, /* Append non-overlapping bands - * in region 1 ? - */ - int append_non2, /* Append non-overlapping bands - * in region 2 ? - */ - int * overlap) -{ - box_type_t *r1; /* Pointer into first region */ - box_type_t *r2; /* Pointer into 2d region */ - box_type_t *r1_end; /* End of 1st region */ - box_type_t *r2_end; /* End of 2d region */ - int ybot; /* Bottom of intersection */ - int ytop; /* Top of intersection */ - region_data_type_t *old_data; /* Old data for new_reg */ - int prev_band; /* Index of start of - * previous band in new_reg */ - int cur_band; /* Index of start of current - * band in new_reg */ - box_type_t * r1_band_end; /* End of current band in r1 */ - box_type_t * r2_band_end; /* End of current band in r2 */ - int top; /* Top of non-overlapping band */ - int bot; /* Bottom of non-overlapping band*/ - int r1y1; /* Temps for r1->y1 and r2->y1 */ - int r2y1; - int new_size; - int numRects; - - /* - * Break any region computed from a broken region - */ - if (PIXREGION_NAR (reg1) || PIXREGION_NAR (reg2)) - return pixman_break (new_reg); - - /* - * Initialization: - * set r1, r2, r1_end and r2_end appropriately, save the rectangles - * of the destination region until the end in case it's one of - * the two source regions, then mark the "new" region empty, allocating - * another array of rectangles for it to use. - */ - - r1 = PIXREGION_RECTS (reg1); - new_size = PIXREGION_NUMRECTS (reg1); - r1_end = r1 + new_size; - - numRects = PIXREGION_NUMRECTS (reg2); - r2 = PIXREGION_RECTS (reg2); - r2_end = r2 + numRects; - - critical_if_fail (r1 != r1_end); - critical_if_fail (r2 != r2_end); - - old_data = (region_data_type_t *)NULL; - - if (((new_reg == reg1) && (new_size > 1)) || - ((new_reg == reg2) && (numRects > 1))) - { - old_data = new_reg->data; - new_reg->data = pixman_region_empty_data; - } - - /* guess at new size */ - if (numRects > new_size) - new_size = numRects; - - new_size <<= 1; - - if (!new_reg->data) - new_reg->data = pixman_region_empty_data; - else if (new_reg->data->size) - new_reg->data->numRects = 0; - - if (new_size > new_reg->data->size) - { - if (!pixman_rect_alloc (new_reg, new_size)) - { - if (old_data) - free (old_data); - return FALSE; - } - } - - /* - * Initialize ybot. - * In the upcoming loop, ybot and ytop serve different functions depending - * on whether the band being handled is an overlapping or non-overlapping - * band. - * In the case of a non-overlapping band (only one of the regions - * has points in the band), ybot is the bottom of the most recent - * intersection and thus clips the top of the rectangles in that band. - * ytop is the top of the next intersection between the two regions and - * serves to clip the bottom of the rectangles in the current band. - * For an overlapping band (where the two regions intersect), ytop clips - * the top of the rectangles of both regions and ybot clips the bottoms. - */ - - ybot = MIN (r1->y1, r2->y1); - - /* - * prev_band serves to mark the start of the previous band so rectangles - * can be coalesced into larger rectangles. qv. pixman_coalesce, above. - * In the beginning, there is no previous band, so prev_band == cur_band - * (cur_band is set later on, of course, but the first band will always - * start at index 0). prev_band and cur_band must be indices because of - * the possible expansion, and resultant moving, of the new region's - * array of rectangles. - */ - prev_band = 0; - - do - { - /* - * This algorithm proceeds one source-band (as opposed to a - * destination band, which is determined by where the two regions - * intersect) at a time. r1_band_end and r2_band_end serve to mark the - * rectangle after the last one in the current band for their - * respective regions. - */ - critical_if_fail (r1 != r1_end); - critical_if_fail (r2 != r2_end); - - FIND_BAND (r1, r1_band_end, r1_end, r1y1); - FIND_BAND (r2, r2_band_end, r2_end, r2y1); - - /* - * First handle the band that doesn't intersect, if any. - * - * Note that attention is restricted to one band in the - * non-intersecting region at once, so if a region has n - * bands between the current position and the next place it overlaps - * the other, this entire loop will be passed through n times. - */ - if (r1y1 < r2y1) - { - if (append_non1) - { - top = MAX (r1y1, ybot); - bot = MIN (r1->y2, r2y1); - if (top != bot) - { - cur_band = new_reg->data->numRects; - if (!pixman_region_append_non_o (new_reg, r1, r1_band_end, top, bot)) - goto bail; - COALESCE (new_reg, prev_band, cur_band); - } - } - ytop = r2y1; - } - else if (r2y1 < r1y1) - { - if (append_non2) - { - top = MAX (r2y1, ybot); - bot = MIN (r2->y2, r1y1); - - if (top != bot) - { - cur_band = new_reg->data->numRects; - - if (!pixman_region_append_non_o (new_reg, r2, r2_band_end, top, bot)) - goto bail; - - COALESCE (new_reg, prev_band, cur_band); - } - } - ytop = r1y1; - } - else - { - ytop = r1y1; - } - - /* - * Now see if we've hit an intersecting band. The two bands only - * intersect if ybot > ytop - */ - ybot = MIN (r1->y2, r2->y2); - if (ybot > ytop) - { - cur_band = new_reg->data->numRects; - - if (!(*overlap_func)(new_reg, - r1, r1_band_end, - r2, r2_band_end, - ytop, ybot, - overlap)) - { - goto bail; - } - - COALESCE (new_reg, prev_band, cur_band); - } - - /* - * If we've finished with a band (y2 == ybot) we skip forward - * in the region to the next band. - */ - if (r1->y2 == ybot) - r1 = r1_band_end; - - if (r2->y2 == ybot) - r2 = r2_band_end; - - } - while (r1 != r1_end && r2 != r2_end); - - /* - * Deal with whichever region (if any) still has rectangles left. - * - * We only need to worry about banding and coalescing for the very first - * band left. After that, we can just group all remaining boxes, - * regardless of how many bands, into one final append to the list. - */ - - if ((r1 != r1_end) && append_non1) - { - /* Do first non_overlap1Func call, which may be able to coalesce */ - FIND_BAND (r1, r1_band_end, r1_end, r1y1); - - cur_band = new_reg->data->numRects; - - if (!pixman_region_append_non_o (new_reg, - r1, r1_band_end, - MAX (r1y1, ybot), r1->y2)) - { - goto bail; - } - - COALESCE (new_reg, prev_band, cur_band); - - /* Just append the rest of the boxes */ - APPEND_REGIONS (new_reg, r1_band_end, r1_end); - } - else if ((r2 != r2_end) && append_non2) - { - /* Do first non_overlap2Func call, which may be able to coalesce */ - FIND_BAND (r2, r2_band_end, r2_end, r2y1); - - cur_band = new_reg->data->numRects; - - if (!pixman_region_append_non_o (new_reg, - r2, r2_band_end, - MAX (r2y1, ybot), r2->y2)) - { - goto bail; - } - - COALESCE (new_reg, prev_band, cur_band); - - /* Append rest of boxes */ - APPEND_REGIONS (new_reg, r2_band_end, r2_end); - } - - if (old_data) - free (old_data); - - if (!(numRects = new_reg->data->numRects)) - { - FREE_DATA (new_reg); - new_reg->data = pixman_region_empty_data; - } - else if (numRects == 1) - { - new_reg->extents = *PIXREGION_BOXPTR (new_reg); - FREE_DATA (new_reg); - new_reg->data = (region_data_type_t *)NULL; - } - else - { - DOWNSIZE (new_reg, numRects); - } - - return TRUE; - -bail: - if (old_data) - free (old_data); - - return pixman_break (new_reg); -} - -/*- - *----------------------------------------------------------------------- - * pixman_set_extents -- - * Reset the extents of a region to what they should be. Called by - * pixman_region_subtract and pixman_region_intersect as they can't - * figure it out along the way or do so easily, as pixman_region_union can. - * - * Results: - * None. - * - * Side Effects: - * The region's 'extents' structure is overwritten. - * - *----------------------------------------------------------------------- - */ -static void -pixman_set_extents (region_type_t *region) -{ - box_type_t *box, *box_end; - - if (!region->data) - return; - - if (!region->data->size) - { - region->extents.x2 = region->extents.x1; - region->extents.y2 = region->extents.y1; - return; - } - - box = PIXREGION_BOXPTR (region); - box_end = PIXREGION_END (region); - - /* - * Since box is the first rectangle in the region, it must have the - * smallest y1 and since box_end is the last rectangle in the region, - * it must have the largest y2, because of banding. Initialize x1 and - * x2 from box and box_end, resp., as good things to initialize them - * to... - */ - region->extents.x1 = box->x1; - region->extents.y1 = box->y1; - region->extents.x2 = box_end->x2; - region->extents.y2 = box_end->y2; - - critical_if_fail (region->extents.y1 < region->extents.y2); - - while (box <= box_end) - { - if (box->x1 < region->extents.x1) - region->extents.x1 = box->x1; - if (box->x2 > region->extents.x2) - region->extents.x2 = box->x2; - box++; - } - - critical_if_fail (region->extents.x1 < region->extents.x2); -} - -/*====================================================================== - * Region Intersection - *====================================================================*/ -/*- - *----------------------------------------------------------------------- - * pixman_region_intersect_o -- - * Handle an overlapping band for pixman_region_intersect. - * - * Results: - * TRUE if successful. - * - * Side Effects: - * Rectangles may be added to the region. - * - *----------------------------------------------------------------------- - */ -/*ARGSUSED*/ -static pixman_bool_t -pixman_region_intersect_o (region_type_t *region, - box_type_t * r1, - box_type_t * r1_end, - box_type_t * r2, - box_type_t * r2_end, - int y1, - int y2, - int * overlap) -{ - int x1; - int x2; - box_type_t * next_rect; - - next_rect = PIXREGION_TOP (region); - - critical_if_fail (y1 < y2); - critical_if_fail (r1 != r1_end && r2 != r2_end); - - do - { - x1 = MAX (r1->x1, r2->x1); - x2 = MIN (r1->x2, r2->x2); - - /* - * If there's any overlap between the two rectangles, add that - * overlap to the new region. - */ - if (x1 < x2) - NEWRECT (region, next_rect, x1, y1, x2, y2); - - /* - * Advance the pointer(s) with the leftmost right side, since the next - * rectangle on that list may still overlap the other region's - * current rectangle. - */ - if (r1->x2 == x2) - { - r1++; - } - if (r2->x2 == x2) - { - r2++; - } - } - while ((r1 != r1_end) && (r2 != r2_end)); - - return TRUE; -} - -PIXMAN_EXPORT pixman_bool_t -PREFIX (_intersect) (region_type_t * new_reg, - region_type_t * reg1, - region_type_t * reg2) -{ - GOOD (reg1); - GOOD (reg2); - GOOD (new_reg); - - /* check for trivial reject */ - if (PIXREGION_NIL (reg1) || PIXREGION_NIL (reg2) || - !EXTENTCHECK (®1->extents, ®2->extents)) - { - /* Covers about 20% of all cases */ - FREE_DATA (new_reg); - new_reg->extents.x2 = new_reg->extents.x1; - new_reg->extents.y2 = new_reg->extents.y1; - if (PIXREGION_NAR (reg1) || PIXREGION_NAR (reg2)) - { - new_reg->data = pixman_broken_data; - return FALSE; - } - else - { - new_reg->data = pixman_region_empty_data; - } - } - else if (!reg1->data && !reg2->data) - { - /* Covers about 80% of cases that aren't trivially rejected */ - new_reg->extents.x1 = MAX (reg1->extents.x1, reg2->extents.x1); - new_reg->extents.y1 = MAX (reg1->extents.y1, reg2->extents.y1); - new_reg->extents.x2 = MIN (reg1->extents.x2, reg2->extents.x2); - new_reg->extents.y2 = MIN (reg1->extents.y2, reg2->extents.y2); - - FREE_DATA (new_reg); - - new_reg->data = (region_data_type_t *)NULL; - } - else if (!reg2->data && SUBSUMES (®2->extents, ®1->extents)) - { - return PREFIX (_copy) (new_reg, reg1); - } - else if (!reg1->data && SUBSUMES (®1->extents, ®2->extents)) - { - return PREFIX (_copy) (new_reg, reg2); - } - else if (reg1 == reg2) - { - return PREFIX (_copy) (new_reg, reg1); - } - else - { - /* General purpose intersection */ - int overlap; /* result ignored */ - - if (!pixman_op (new_reg, reg1, reg2, pixman_region_intersect_o, FALSE, FALSE, - &overlap)) - { - return FALSE; - } - - pixman_set_extents (new_reg); - } - - GOOD (new_reg); - return(TRUE); -} - -#define MERGERECT(r) \ - do \ - { \ - if (r->x1 <= x2) \ - { \ - /* Merge with current rectangle */ \ - if (r->x1 < x2) \ - *overlap = TRUE; \ - \ - if (x2 < r->x2) \ - x2 = r->x2; \ - } \ - else \ - { \ - /* Add current rectangle, start new one */ \ - NEWRECT (region, next_rect, x1, y1, x2, y2); \ - x1 = r->x1; \ - x2 = r->x2; \ - } \ - r++; \ - } while (0) - -/*====================================================================== - * Region Union - *====================================================================*/ - -/*- - *----------------------------------------------------------------------- - * pixman_region_union_o -- - * Handle an overlapping band for the union operation. Picks the - * left-most rectangle each time and merges it into the region. - * - * Results: - * TRUE if successful. - * - * Side Effects: - * region is overwritten. - * overlap is set to TRUE if any boxes overlap. - * - *----------------------------------------------------------------------- - */ -static pixman_bool_t -pixman_region_union_o (region_type_t *region, - box_type_t * r1, - box_type_t * r1_end, - box_type_t * r2, - box_type_t * r2_end, - int y1, - int y2, - int * overlap) -{ - box_type_t *next_rect; - int x1; /* left and right side of current union */ - int x2; - - critical_if_fail (y1 < y2); - critical_if_fail (r1 != r1_end && r2 != r2_end); - - next_rect = PIXREGION_TOP (region); - - /* Start off current rectangle */ - if (r1->x1 < r2->x1) - { - x1 = r1->x1; - x2 = r1->x2; - r1++; - } - else - { - x1 = r2->x1; - x2 = r2->x2; - r2++; - } - while (r1 != r1_end && r2 != r2_end) - { - if (r1->x1 < r2->x1) - MERGERECT (r1); - else - MERGERECT (r2); - } - - /* Finish off whoever (if any) is left */ - if (r1 != r1_end) - { - do - { - MERGERECT (r1); - } - while (r1 != r1_end); - } - else if (r2 != r2_end) - { - do - { - MERGERECT (r2); - } - while (r2 != r2_end); - } - - /* Add current rectangle */ - NEWRECT (region, next_rect, x1, y1, x2, y2); - - return TRUE; -} - -/* Convenience function for performing union of region with a - * single rectangle - */ -PIXMAN_EXPORT pixman_bool_t -PREFIX (_union_rect) (region_type_t *dest, - region_type_t *source, - int x, - int y, - unsigned int width, - unsigned int height) -{ - region_type_t region; - - region.extents.x1 = x; - region.extents.y1 = y; - region.extents.x2 = x + width; - region.extents.y2 = y + height; - - if (!GOOD_RECT (®ion.extents)) - { - if (BAD_RECT (®ion.extents)) - _pixman_log_error (FUNC, "Invalid rectangle passed"); - return PREFIX (_copy) (dest, source); - } - - region.data = NULL; - - return PREFIX (_union) (dest, source, ®ion); -} - -PIXMAN_EXPORT pixman_bool_t -PREFIX (_union) (region_type_t *new_reg, - region_type_t *reg1, - region_type_t *reg2) -{ - int overlap; /* result ignored */ - - /* Return TRUE if some overlap - * between reg1, reg2 - */ - GOOD (reg1); - GOOD (reg2); - GOOD (new_reg); - - /* checks all the simple cases */ - - /* - * Region 1 and 2 are the same - */ - if (reg1 == reg2) - return PREFIX (_copy) (new_reg, reg1); - - /* - * Region 1 is empty - */ - if (PIXREGION_NIL (reg1)) - { - if (PIXREGION_NAR (reg1)) - return pixman_break (new_reg); - - if (new_reg != reg2) - return PREFIX (_copy) (new_reg, reg2); - - return TRUE; - } - - /* - * Region 2 is empty - */ - if (PIXREGION_NIL (reg2)) - { - if (PIXREGION_NAR (reg2)) - return pixman_break (new_reg); - - if (new_reg != reg1) - return PREFIX (_copy) (new_reg, reg1); - - return TRUE; - } - - /* - * Region 1 completely subsumes region 2 - */ - if (!reg1->data && SUBSUMES (®1->extents, ®2->extents)) - { - if (new_reg != reg1) - return PREFIX (_copy) (new_reg, reg1); - - return TRUE; - } - - /* - * Region 2 completely subsumes region 1 - */ - if (!reg2->data && SUBSUMES (®2->extents, ®1->extents)) - { - if (new_reg != reg2) - return PREFIX (_copy) (new_reg, reg2); - - return TRUE; - } - - if (!pixman_op (new_reg, reg1, reg2, pixman_region_union_o, TRUE, TRUE, &overlap)) - return FALSE; - - new_reg->extents.x1 = MIN (reg1->extents.x1, reg2->extents.x1); - new_reg->extents.y1 = MIN (reg1->extents.y1, reg2->extents.y1); - new_reg->extents.x2 = MAX (reg1->extents.x2, reg2->extents.x2); - new_reg->extents.y2 = MAX (reg1->extents.y2, reg2->extents.y2); - - GOOD (new_reg); - - return TRUE; -} - -/*====================================================================== - * Batch Rectangle Union - *====================================================================*/ - -#define EXCHANGE_RECTS(a, b) \ - { \ - box_type_t t; \ - t = rects[a]; \ - rects[a] = rects[b]; \ - rects[b] = t; \ - } - -static void -quick_sort_rects ( - box_type_t rects[], - int numRects) -{ - int y1; - int x1; - int i, j; - box_type_t *r; - - /* Always called with numRects > 1 */ - - do - { - if (numRects == 2) - { - if (rects[0].y1 > rects[1].y1 || - (rects[0].y1 == rects[1].y1 && rects[0].x1 > rects[1].x1)) - { - EXCHANGE_RECTS (0, 1); - } - - return; - } - - /* Choose partition element, stick in location 0 */ - EXCHANGE_RECTS (0, numRects >> 1); - y1 = rects[0].y1; - x1 = rects[0].x1; - - /* Partition array */ - i = 0; - j = numRects; - - do - { - r = &(rects[i]); - do - { - r++; - i++; - } - - while (i != numRects && (r->y1 < y1 || (r->y1 == y1 && r->x1 < x1))) - ; - - r = &(rects[j]); - do - { - r--; - j--; - } - while (y1 < r->y1 || (y1 == r->y1 && x1 < r->x1)); - - if (i < j) - EXCHANGE_RECTS (i, j); - } - while (i < j); - - /* Move partition element back to middle */ - EXCHANGE_RECTS (0, j); - - /* Recurse */ - if (numRects - j - 1 > 1) - quick_sort_rects (&rects[j + 1], numRects - j - 1); - - numRects = j; - } - while (numRects > 1); -} - -/*- - *----------------------------------------------------------------------- - * pixman_region_validate -- - * - * Take a ``region'' which is a non-y-x-banded random collection of - * rectangles, and compute a nice region which is the union of all the - * rectangles. - * - * Results: - * TRUE if successful. - * - * Side Effects: - * The passed-in ``region'' may be modified. - * overlap set to TRUE if any retangles overlapped, - * else FALSE; - * - * Strategy: - * Step 1. Sort the rectangles into ascending order with primary key y1 - * and secondary key x1. - * - * Step 2. Split the rectangles into the minimum number of proper y-x - * banded regions. This may require horizontally merging - * rectangles, and vertically coalescing bands. With any luck, - * this step in an identity transformation (ala the Box widget), - * or a coalescing into 1 box (ala Menus). - * - * Step 3. Merge the separate regions down to a single region by calling - * pixman_region_union. Maximize the work each pixman_region_union call does by using - * a binary merge. - * - *----------------------------------------------------------------------- - */ - -static pixman_bool_t -validate (region_type_t * badreg, - int * overlap) -{ - /* Descriptor for regions under construction in Step 2. */ - typedef struct - { - region_type_t reg; - int prev_band; - int cur_band; - } region_info_t; - - region_info_t stack_regions[64]; - - int numRects; /* Original numRects for badreg */ - region_info_t *ri; /* Array of current regions */ - int num_ri; /* Number of entries used in ri */ - int size_ri; /* Number of entries available in ri */ - int i; /* Index into rects */ - int j; /* Index into ri */ - region_info_t *rit; /* &ri[j] */ - region_type_t *reg; /* ri[j].reg */ - box_type_t *box; /* Current box in rects */ - box_type_t *ri_box; /* Last box in ri[j].reg */ - region_type_t *hreg; /* ri[j_half].reg */ - pixman_bool_t ret = TRUE; - - *overlap = FALSE; - if (!badreg->data) - { - GOOD (badreg); - return TRUE; - } - - numRects = badreg->data->numRects; - if (!numRects) - { - if (PIXREGION_NAR (badreg)) - return FALSE; - GOOD (badreg); - return TRUE; - } - - if (badreg->extents.x1 < badreg->extents.x2) - { - if ((numRects) == 1) - { - FREE_DATA (badreg); - badreg->data = (region_data_type_t *) NULL; - } - else - { - DOWNSIZE (badreg, numRects); - } - - GOOD (badreg); - - return TRUE; - } - - /* Step 1: Sort the rects array into ascending (y1, x1) order */ - quick_sort_rects (PIXREGION_BOXPTR (badreg), numRects); - - /* Step 2: Scatter the sorted array into the minimum number of regions */ - - /* Set up the first region to be the first rectangle in badreg */ - /* Note that step 2 code will never overflow the ri[0].reg rects array */ - ri = stack_regions; - size_ri = sizeof (stack_regions) / sizeof (stack_regions[0]); - num_ri = 1; - ri[0].prev_band = 0; - ri[0].cur_band = 0; - ri[0].reg = *badreg; - box = PIXREGION_BOXPTR (&ri[0].reg); - ri[0].reg.extents = *box; - ri[0].reg.data->numRects = 1; - badreg->extents = *pixman_region_empty_box; - badreg->data = pixman_region_empty_data; - - /* Now scatter rectangles into the minimum set of valid regions. If the - * next rectangle to be added to a region would force an existing rectangle - * in the region to be split up in order to maintain y-x banding, just - * forget it. Try the next region. If it doesn't fit cleanly into any - * region, make a new one. - */ - - for (i = numRects; --i > 0;) - { - box++; - /* Look for a region to append box to */ - for (j = num_ri, rit = ri; --j >= 0; rit++) - { - reg = &rit->reg; - ri_box = PIXREGION_END (reg); - - if (box->y1 == ri_box->y1 && box->y2 == ri_box->y2) - { - /* box is in same band as ri_box. Merge or append it */ - if (box->x1 <= ri_box->x2) - { - /* Merge it with ri_box */ - if (box->x1 < ri_box->x2) - *overlap = TRUE; - - if (box->x2 > ri_box->x2) - ri_box->x2 = box->x2; - } - else - { - RECTALLOC_BAIL (reg, 1, bail); - *PIXREGION_TOP (reg) = *box; - reg->data->numRects++; - } - - goto next_rect; /* So sue me */ - } - else if (box->y1 >= ri_box->y2) - { - /* Put box into new band */ - if (reg->extents.x2 < ri_box->x2) - reg->extents.x2 = ri_box->x2; - - if (reg->extents.x1 > box->x1) - reg->extents.x1 = box->x1; - - COALESCE (reg, rit->prev_band, rit->cur_band); - rit->cur_band = reg->data->numRects; - RECTALLOC_BAIL (reg, 1, bail); - *PIXREGION_TOP (reg) = *box; - reg->data->numRects++; - - goto next_rect; - } - /* Well, this region was inappropriate. Try the next one. */ - } /* for j */ - - /* Uh-oh. No regions were appropriate. Create a new one. */ - if (size_ri == num_ri) - { - size_t data_size; - - /* Oops, allocate space for new region information */ - size_ri <<= 1; - - data_size = size_ri * sizeof(region_info_t); - if (data_size / size_ri != sizeof(region_info_t)) - goto bail; - - if (ri == stack_regions) - { - rit = malloc (data_size); - if (!rit) - goto bail; - memcpy (rit, ri, num_ri * sizeof (region_info_t)); - } - else - { - rit = (region_info_t *) realloc (ri, data_size); - if (!rit) - goto bail; - } - ri = rit; - rit = &ri[num_ri]; - } - num_ri++; - rit->prev_band = 0; - rit->cur_band = 0; - rit->reg.extents = *box; - rit->reg.data = (region_data_type_t *)NULL; - - /* MUST force allocation */ - if (!pixman_rect_alloc (&rit->reg, (i + num_ri) / num_ri)) - goto bail; - - next_rect: ; - } /* for i */ - - /* Make a final pass over each region in order to COALESCE and set - * extents.x2 and extents.y2 - */ - for (j = num_ri, rit = ri; --j >= 0; rit++) - { - reg = &rit->reg; - ri_box = PIXREGION_END (reg); - reg->extents.y2 = ri_box->y2; - - if (reg->extents.x2 < ri_box->x2) - reg->extents.x2 = ri_box->x2; - - COALESCE (reg, rit->prev_band, rit->cur_band); - - if (reg->data->numRects == 1) /* keep unions happy below */ - { - FREE_DATA (reg); - reg->data = (region_data_type_t *)NULL; - } - } - - /* Step 3: Union all regions into a single region */ - while (num_ri > 1) - { - int half = num_ri / 2; - for (j = num_ri & 1; j < (half + (num_ri & 1)); j++) - { - reg = &ri[j].reg; - hreg = &ri[j + half].reg; - - if (!pixman_op (reg, reg, hreg, pixman_region_union_o, TRUE, TRUE, overlap)) - ret = FALSE; - - if (hreg->extents.x1 < reg->extents.x1) - reg->extents.x1 = hreg->extents.x1; - - if (hreg->extents.y1 < reg->extents.y1) - reg->extents.y1 = hreg->extents.y1; - - if (hreg->extents.x2 > reg->extents.x2) - reg->extents.x2 = hreg->extents.x2; - - if (hreg->extents.y2 > reg->extents.y2) - reg->extents.y2 = hreg->extents.y2; - - FREE_DATA (hreg); - } - - num_ri -= half; - - if (!ret) - goto bail; - } - - *badreg = ri[0].reg; - - if (ri != stack_regions) - free (ri); - - GOOD (badreg); - return ret; - -bail: - for (i = 0; i < num_ri; i++) - FREE_DATA (&ri[i].reg); - - if (ri != stack_regions) - free (ri); - - return pixman_break (badreg); -} - -/*====================================================================== - * Region Subtraction - *====================================================================*/ - -/*- - *----------------------------------------------------------------------- - * pixman_region_subtract_o -- - * Overlapping band subtraction. x1 is the left-most point not yet - * checked. - * - * Results: - * TRUE if successful. - * - * Side Effects: - * region may have rectangles added to it. - * - *----------------------------------------------------------------------- - */ -/*ARGSUSED*/ -static pixman_bool_t -pixman_region_subtract_o (region_type_t * region, - box_type_t * r1, - box_type_t * r1_end, - box_type_t * r2, - box_type_t * r2_end, - int y1, - int y2, - int * overlap) -{ - box_type_t * next_rect; - int x1; - - x1 = r1->x1; - - critical_if_fail (y1 < y2); - critical_if_fail (r1 != r1_end && r2 != r2_end); - - next_rect = PIXREGION_TOP (region); - - do - { - if (r2->x2 <= x1) - { - /* - * Subtrahend entirely to left of minuend: go to next subtrahend. - */ - r2++; - } - else if (r2->x1 <= x1) - { - /* - * Subtrahend preceeds minuend: nuke left edge of minuend. - */ - x1 = r2->x2; - if (x1 >= r1->x2) - { - /* - * Minuend completely covered: advance to next minuend and - * reset left fence to edge of new minuend. - */ - r1++; - if (r1 != r1_end) - x1 = r1->x1; - } - else - { - /* - * Subtrahend now used up since it doesn't extend beyond - * minuend - */ - r2++; - } - } - else if (r2->x1 < r1->x2) - { - /* - * Left part of subtrahend covers part of minuend: add uncovered - * part of minuend to region and skip to next subtrahend. - */ - critical_if_fail (x1 < r2->x1); - NEWRECT (region, next_rect, x1, y1, r2->x1, y2); - - x1 = r2->x2; - if (x1 >= r1->x2) - { - /* - * Minuend used up: advance to new... - */ - r1++; - if (r1 != r1_end) - x1 = r1->x1; - } - else - { - /* - * Subtrahend used up - */ - r2++; - } - } - else - { - /* - * Minuend used up: add any remaining piece before advancing. - */ - if (r1->x2 > x1) - NEWRECT (region, next_rect, x1, y1, r1->x2, y2); - - r1++; - - if (r1 != r1_end) - x1 = r1->x1; - } - } - while ((r1 != r1_end) && (r2 != r2_end)); - - /* - * Add remaining minuend rectangles to region. - */ - while (r1 != r1_end) - { - critical_if_fail (x1 < r1->x2); - - NEWRECT (region, next_rect, x1, y1, r1->x2, y2); - - r1++; - if (r1 != r1_end) - x1 = r1->x1; - } - return TRUE; -} - -/*- - *----------------------------------------------------------------------- - * pixman_region_subtract -- - * Subtract reg_s from reg_m and leave the result in reg_d. - * S stands for subtrahend, M for minuend and D for difference. - * - * Results: - * TRUE if successful. - * - * Side Effects: - * reg_d is overwritten. - * - *----------------------------------------------------------------------- - */ -PIXMAN_EXPORT pixman_bool_t -PREFIX (_subtract) (region_type_t *reg_d, - region_type_t *reg_m, - region_type_t *reg_s) -{ - int overlap; /* result ignored */ - - GOOD (reg_m); - GOOD (reg_s); - GOOD (reg_d); - - /* check for trivial rejects */ - if (PIXREGION_NIL (reg_m) || PIXREGION_NIL (reg_s) || - !EXTENTCHECK (®_m->extents, ®_s->extents)) - { - if (PIXREGION_NAR (reg_s)) - return pixman_break (reg_d); - - return PREFIX (_copy) (reg_d, reg_m); - } - else if (reg_m == reg_s) - { - FREE_DATA (reg_d); - reg_d->extents.x2 = reg_d->extents.x1; - reg_d->extents.y2 = reg_d->extents.y1; - reg_d->data = pixman_region_empty_data; - - return TRUE; - } - - /* Add those rectangles in region 1 that aren't in region 2, - do yucky substraction for overlaps, and - just throw away rectangles in region 2 that aren't in region 1 */ - if (!pixman_op (reg_d, reg_m, reg_s, pixman_region_subtract_o, TRUE, FALSE, &overlap)) - return FALSE; - - /* - * Can't alter reg_d's extents before we call pixman_op because - * it might be one of the source regions and pixman_op depends - * on the extents of those regions being unaltered. Besides, this - * way there's no checking against rectangles that will be nuked - * due to coalescing, so we have to examine fewer rectangles. - */ - pixman_set_extents (reg_d); - GOOD (reg_d); - return TRUE; -} - -/*====================================================================== - * Region Inversion - *====================================================================*/ - -/*- - *----------------------------------------------------------------------- - * pixman_region_inverse -- - * Take a region and a box and return a region that is everything - * in the box but not in the region. The careful reader will note - * that this is the same as subtracting the region from the box... - * - * Results: - * TRUE. - * - * Side Effects: - * new_reg is overwritten. - * - *----------------------------------------------------------------------- - */ -pixman_bool_t -PIXMAN_EXPORT PREFIX (_inverse) (region_type_t *new_reg, /* Destination region */ - region_type_t *reg1, /* Region to invert */ - box_type_t * inv_rect) /* Bounding box for inversion */ -{ - region_type_t inv_reg; /* Quick and dirty region made from the - * bounding box */ - int overlap; /* result ignored */ - - GOOD (reg1); - GOOD (new_reg); - - /* check for trivial rejects */ - if (PIXREGION_NIL (reg1) || !EXTENTCHECK (inv_rect, ®1->extents)) - { - if (PIXREGION_NAR (reg1)) - return pixman_break (new_reg); - - new_reg->extents = *inv_rect; - FREE_DATA (new_reg); - new_reg->data = (region_data_type_t *)NULL; - - return TRUE; - } - - /* Add those rectangles in region 1 that aren't in region 2, - * do yucky substraction for overlaps, and - * just throw away rectangles in region 2 that aren't in region 1 - */ - inv_reg.extents = *inv_rect; - inv_reg.data = (region_data_type_t *)NULL; - if (!pixman_op (new_reg, &inv_reg, reg1, pixman_region_subtract_o, TRUE, FALSE, &overlap)) - return FALSE; - - /* - * Can't alter new_reg's extents before we call pixman_op because - * it might be one of the source regions and pixman_op depends - * on the extents of those regions being unaltered. Besides, this - * way there's no checking against rectangles that will be nuked - * due to coalescing, so we have to examine fewer rectangles. - */ - pixman_set_extents (new_reg); - GOOD (new_reg); - return TRUE; -} - -/* - * rect_in(region, rect) - * This routine takes a pointer to a region and a pointer to a box - * and determines if the box is outside/inside/partly inside the region. - * - * The idea is to travel through the list of rectangles trying to cover the - * passed box with them. Anytime a piece of the rectangle isn't covered - * by a band of rectangles, part_out is set TRUE. Any time a rectangle in - * the region covers part of the box, part_in is set TRUE. The process ends - * when either the box has been completely covered (we reached a band that - * doesn't overlap the box, part_in is TRUE and part_out is false), the - * box has been partially covered (part_in == part_out == TRUE -- because of - * the banding, the first time this is true we know the box is only - * partially in the region) or is outside the region (we reached a band - * that doesn't overlap the box at all and part_in is false) - */ - -pixman_region_overlap_t -PIXMAN_EXPORT PREFIX (_contains_rectangle) (region_type_t * region, - box_type_t * prect) -{ - box_type_t * pbox; - box_type_t * pbox_end; - int part_in, part_out; - int numRects; - int x, y; - - GOOD (region); - - numRects = PIXREGION_NUMRECTS (region); - - /* useful optimization */ - if (!numRects || !EXTENTCHECK (®ion->extents, prect)) - return(PIXMAN_REGION_OUT); - - if (numRects == 1) - { - /* We know that it must be PIXMAN_REGION_IN or PIXMAN_REGION_PART */ - if (SUBSUMES (®ion->extents, prect)) - return(PIXMAN_REGION_IN); - else - return(PIXMAN_REGION_PART); - } - - part_out = FALSE; - part_in = FALSE; - - /* (x,y) starts at upper left of rect, moving to the right and down */ - x = prect->x1; - y = prect->y1; - - /* can stop when both part_out and part_in are TRUE, or we reach prect->y2 */ - for (pbox = PIXREGION_BOXPTR (region), pbox_end = pbox + numRects; - pbox != pbox_end; - pbox++) - { - - if (pbox->y2 <= y) - continue; /* getting up to speed or skipping remainder of band */ - - if (pbox->y1 > y) - { - part_out = TRUE; /* missed part of rectangle above */ - if (part_in || (pbox->y1 >= prect->y2)) - break; - y = pbox->y1; /* x guaranteed to be == prect->x1 */ - } - - if (pbox->x2 <= x) - continue; /* not far enough over yet */ - - if (pbox->x1 > x) - { - part_out = TRUE; /* missed part of rectangle to left */ - if (part_in) - break; - } - - if (pbox->x1 < prect->x2) - { - part_in = TRUE; /* definitely overlap */ - if (part_out) - break; - } - - if (pbox->x2 >= prect->x2) - { - y = pbox->y2; /* finished with this band */ - if (y >= prect->y2) - break; - x = prect->x1; /* reset x out to left again */ - } - else - { - /* - * Because boxes in a band are maximal width, if the first box - * to overlap the rectangle doesn't completely cover it in that - * band, the rectangle must be partially out, since some of it - * will be uncovered in that band. part_in will have been set true - * by now... - */ - part_out = TRUE; - break; - } - } - - if (part_in) - { - if (y < prect->y2) - return PIXMAN_REGION_PART; - else - return PIXMAN_REGION_IN; - } - else - { - return PIXMAN_REGION_OUT; - } -} - -/* PREFIX(_translate) (region, x, y) - * translates in place - */ - -PIXMAN_EXPORT void -PREFIX (_translate) (region_type_t *region, int x, int y) -{ - int x1, x2, y1, y2; - int nbox; - box_type_t * pbox; - - GOOD (region); - region->extents.x1 = x1 = region->extents.x1 + x; - region->extents.y1 = y1 = region->extents.y1 + y; - region->extents.x2 = x2 = region->extents.x2 + x; - region->extents.y2 = y2 = region->extents.y2 + y; - - if (((x1 - SHRT_MIN) | (y1 - SHRT_MIN) | (SHRT_MAX - x2) | (SHRT_MAX - y2)) >= 0) - { - if (region->data && (nbox = region->data->numRects)) - { - for (pbox = PIXREGION_BOXPTR (region); nbox--; pbox++) - { - pbox->x1 += x; - pbox->y1 += y; - pbox->x2 += x; - pbox->y2 += y; - } - } - return; - } - - if (((x2 - SHRT_MIN) | (y2 - SHRT_MIN) | (SHRT_MAX - x1) | (SHRT_MAX - y1)) <= 0) - { - region->extents.x2 = region->extents.x1; - region->extents.y2 = region->extents.y1; - FREE_DATA (region); - region->data = pixman_region_empty_data; - return; - } - - if (x1 < SHRT_MIN) - region->extents.x1 = SHRT_MIN; - else if (x2 > SHRT_MAX) - region->extents.x2 = SHRT_MAX; - - if (y1 < SHRT_MIN) - region->extents.y1 = SHRT_MIN; - else if (y2 > SHRT_MAX) - region->extents.y2 = SHRT_MAX; - - if (region->data && (nbox = region->data->numRects)) - { - box_type_t * pbox_out; - - for (pbox_out = pbox = PIXREGION_BOXPTR (region); nbox--; pbox++) - { - pbox_out->x1 = x1 = pbox->x1 + x; - pbox_out->y1 = y1 = pbox->y1 + y; - pbox_out->x2 = x2 = pbox->x2 + x; - pbox_out->y2 = y2 = pbox->y2 + y; - - if (((x2 - SHRT_MIN) | (y2 - SHRT_MIN) | - (SHRT_MAX - x1) | (SHRT_MAX - y1)) <= 0) - { - region->data->numRects--; - continue; - } - - if (x1 < SHRT_MIN) - pbox_out->x1 = SHRT_MIN; - else if (x2 > SHRT_MAX) - pbox_out->x2 = SHRT_MAX; - - if (y1 < SHRT_MIN) - pbox_out->y1 = SHRT_MIN; - else if (y2 > SHRT_MAX) - pbox_out->y2 = SHRT_MAX; - - pbox_out++; - } - - if (pbox_out != pbox) - { - if (region->data->numRects == 1) - { - region->extents = *PIXREGION_BOXPTR (region); - FREE_DATA (region); - region->data = (region_data_type_t *)NULL; - } - else - { - pixman_set_extents (region); - } - } - } - - GOOD (region); -} - -PIXMAN_EXPORT void -PREFIX (_reset) (region_type_t *region, box_type_t *box) -{ - GOOD (region); - - critical_if_fail (GOOD_RECT (box)); - - region->extents = *box; - - FREE_DATA (region); - - region->data = NULL; -} - -/* box is "return" value */ -PIXMAN_EXPORT int -PREFIX (_contains_point) (region_type_t * region, - int x, int y, - box_type_t * box) -{ - box_type_t *pbox, *pbox_end; - int numRects; - - GOOD (region); - numRects = PIXREGION_NUMRECTS (region); - - if (!numRects || !INBOX (®ion->extents, x, y)) - return(FALSE); - - if (numRects == 1) - { - if (box) - *box = region->extents; - - return(TRUE); - } - - for (pbox = PIXREGION_BOXPTR (region), pbox_end = pbox + numRects; - pbox != pbox_end; - pbox++) - { - if (y >= pbox->y2) - continue; /* not there yet */ - - if ((y < pbox->y1) || (x < pbox->x1)) - break; /* missed it */ - - if (x >= pbox->x2) - continue; /* not there yet */ - - if (box) - *box = *pbox; - - return(TRUE); - } - - return(FALSE); -} - -PIXMAN_EXPORT int -PREFIX (_not_empty) (region_type_t * region) -{ - GOOD (region); - - return(!PIXREGION_NIL (region)); -} - -PIXMAN_EXPORT box_type_t * -PREFIX (_extents) (region_type_t * region) -{ - GOOD (region); - - return(®ion->extents); -} - -/* - * Clip a list of scanlines to a region. The caller has allocated the - * space. FSorted is non-zero if the scanline origins are in ascending order. - * - * returns the number of new, clipped scanlines. - */ - -PIXMAN_EXPORT pixman_bool_t -PREFIX (_selfcheck) (region_type_t *reg) -{ - int i, numRects; - - if ((reg->extents.x1 > reg->extents.x2) || - (reg->extents.y1 > reg->extents.y2)) - { - return FALSE; - } - - numRects = PIXREGION_NUMRECTS (reg); - if (!numRects) - { - return ((reg->extents.x1 == reg->extents.x2) && - (reg->extents.y1 == reg->extents.y2) && - (reg->data->size || (reg->data == pixman_region_empty_data))); - } - else if (numRects == 1) - { - return (!reg->data); - } - else - { - box_type_t * pbox_p, * pbox_n; - box_type_t box; - - pbox_p = PIXREGION_RECTS (reg); - box = *pbox_p; - box.y2 = pbox_p[numRects - 1].y2; - pbox_n = pbox_p + 1; - - for (i = numRects; --i > 0; pbox_p++, pbox_n++) - { - if ((pbox_n->x1 >= pbox_n->x2) || - (pbox_n->y1 >= pbox_n->y2)) - { - return FALSE; - } - - if (pbox_n->x1 < box.x1) - box.x1 = pbox_n->x1; - - if (pbox_n->x2 > box.x2) - box.x2 = pbox_n->x2; - - if ((pbox_n->y1 < pbox_p->y1) || - ((pbox_n->y1 == pbox_p->y1) && - ((pbox_n->x1 < pbox_p->x2) || (pbox_n->y2 != pbox_p->y2)))) - { - return FALSE; - } - } - - return ((box.x1 == reg->extents.x1) && - (box.x2 == reg->extents.x2) && - (box.y1 == reg->extents.y1) && - (box.y2 == reg->extents.y2)); - } -} - -PIXMAN_EXPORT pixman_bool_t -PREFIX (_init_rects) (region_type_t *region, - const box_type_t *boxes, int count) -{ - box_type_t *rects; - int displacement; - int i; - - /* if it's 1, then we just want to set the extents, so call - * the existing method. */ - if (count == 1) - { - PREFIX (_init_rect) (region, - boxes[0].x1, - boxes[0].y1, - boxes[0].x2 - boxes[0].x1, - boxes[0].y2 - boxes[0].y1); - return TRUE; - } - - PREFIX (_init) (region); - - /* if it's 0, don't call pixman_rect_alloc -- 0 rectangles is - * a special case, and causing pixman_rect_alloc would cause - * us to leak memory (because the 0-rect case should be the - * static pixman_region_empty_data data). - */ - if (count == 0) - return TRUE; - - if (!pixman_rect_alloc (region, count)) - return FALSE; - - rects = PIXREGION_RECTS (region); - - /* Copy in the rects */ - memcpy (rects, boxes, sizeof(box_type_t) * count); - region->data->numRects = count; - - /* Eliminate empty and malformed rectangles */ - displacement = 0; - - for (i = 0; i < count; ++i) - { - box_type_t *box = &rects[i]; - - if (box->x1 >= box->x2 || box->y1 >= box->y2) - displacement++; - else if (displacement) - rects[i - displacement] = rects[i]; - } - - region->data->numRects -= displacement; - - /* If eliminating empty rectangles caused there - * to be only 0 or 1 rectangles, deal with that. - */ - if (region->data->numRects == 0) - { - FREE_DATA (region); - PREFIX (_init) (region); - - return TRUE; - } - - if (region->data->numRects == 1) - { - region->extents = rects[0]; - - FREE_DATA (region); - region->data = NULL; - - GOOD (region); - - return TRUE; - } - - /* Validate */ - region->extents.x1 = region->extents.x2 = 0; - - return validate (region, &i); -} - -#define READ(_ptr) (*(_ptr)) - -static inline box_type_t * -bitmap_addrect (region_type_t *reg, - box_type_t *r, - box_type_t **first_rect, - int rx1, int ry1, - int rx2, int ry2) -{ - if ((rx1 < rx2) && (ry1 < ry2) && - (!(reg->data->numRects && - ((r-1)->y1 == ry1) && ((r-1)->y2 == ry2) && - ((r-1)->x1 <= rx1) && ((r-1)->x2 >= rx2)))) - { - if (!reg->data || - reg->data->numRects == reg->data->size) - { - if (!pixman_rect_alloc (reg, 1)) - return NULL; - *first_rect = PIXREGION_BOXPTR(reg); - r = *first_rect + reg->data->numRects; - } - r->x1 = rx1; - r->y1 = ry1; - r->x2 = rx2; - r->y2 = ry2; - reg->data->numRects++; - if (r->x1 < reg->extents.x1) - reg->extents.x1 = r->x1; - if (r->x2 > reg->extents.x2) - reg->extents.x2 = r->x2; - r++; - } - return r; -} - -/* Convert bitmap clip mask into clipping region. - * First, goes through each line and makes boxes by noting the transitions - * from 0 to 1 and 1 to 0. - * Then it coalesces the current line with the previous if they have boxes - * at the same X coordinates. - * Stride is in number of uint32_t per line. - */ -PIXMAN_EXPORT void -PREFIX (_init_from_image) (region_type_t *region, - pixman_image_t *image) -{ - uint32_t mask0 = 0xffffffff & ~SCREEN_SHIFT_RIGHT(0xffffffff, 1); - box_type_t *first_rect, *rects, *prect_line_start; - box_type_t *old_rect, *new_rect; - uint32_t *pw, w, *pw_line, *pw_line_end; - int irect_prev_start, irect_line_start; - int h, base, rx1 = 0, crects; - int ib; - pixman_bool_t in_box, same; - int width, height, stride; - - PREFIX(_init) (region); - - return_if_fail (image->type == BITS); - return_if_fail (image->bits.format == PIXMAN_a1); - - pw_line = pixman_image_get_data (image); - width = pixman_image_get_width (image); - height = pixman_image_get_height (image); - stride = pixman_image_get_stride (image) / 4; - - first_rect = PIXREGION_BOXPTR(region); - rects = first_rect; - - region->extents.x1 = width - 1; - region->extents.x2 = 0; - irect_prev_start = -1; - for (h = 0; h < height; h++) - { - pw = pw_line; - pw_line += stride; - irect_line_start = rects - first_rect; - - /* If the Screen left most bit of the word is set, we're starting in - * a box */ - if (READ(pw) & mask0) - { - in_box = TRUE; - rx1 = 0; - } - else - { - in_box = FALSE; - } - - /* Process all words which are fully in the pixmap */ - pw_line_end = pw + (width >> 5); - for (base = 0; pw < pw_line_end; base += 32) - { - w = READ(pw++); - if (in_box) - { - if (!~w) - continue; - } - else - { - if (!w) - continue; - } - for (ib = 0; ib < 32; ib++) - { - /* If the Screen left most bit of the word is set, we're - * starting a box */ - if (w & mask0) - { - if (!in_box) - { - rx1 = base + ib; - /* start new box */ - in_box = TRUE; - } - } - else - { - if (in_box) - { - /* end box */ - rects = bitmap_addrect (region, rects, &first_rect, - rx1, h, base + ib, h + 1); - if (rects == NULL) - goto error; - in_box = FALSE; - } - } - /* Shift the word VISUALLY left one. */ - w = SCREEN_SHIFT_LEFT(w, 1); - } - } - - if (width & 31) - { - /* Process final partial word on line */ - w = READ(pw++); - for (ib = 0; ib < (width & 31); ib++) - { - /* If the Screen left most bit of the word is set, we're - * starting a box */ - if (w & mask0) - { - if (!in_box) - { - rx1 = base + ib; - /* start new box */ - in_box = TRUE; - } - } - else - { - if (in_box) - { - /* end box */ - rects = bitmap_addrect(region, rects, &first_rect, - rx1, h, base + ib, h + 1); - if (rects == NULL) - goto error; - in_box = FALSE; - } - } - /* Shift the word VISUALLY left one. */ - w = SCREEN_SHIFT_LEFT(w, 1); - } - } - /* If scanline ended with last bit set, end the box */ - if (in_box) - { - rects = bitmap_addrect(region, rects, &first_rect, - rx1, h, base + (width & 31), h + 1); - if (rects == NULL) - goto error; - } - /* if all rectangles on this line have the same x-coords as - * those on the previous line, then add 1 to all the previous y2s and - * throw away all the rectangles from this line - */ - same = FALSE; - if (irect_prev_start != -1) - { - crects = irect_line_start - irect_prev_start; - if (crects != 0 && - crects == ((rects - first_rect) - irect_line_start)) - { - old_rect = first_rect + irect_prev_start; - new_rect = prect_line_start = first_rect + irect_line_start; - same = TRUE; - while (old_rect < prect_line_start) - { - if ((old_rect->x1 != new_rect->x1) || - (old_rect->x2 != new_rect->x2)) - { - same = FALSE; - break; - } - old_rect++; - new_rect++; - } - if (same) - { - old_rect = first_rect + irect_prev_start; - while (old_rect < prect_line_start) - { - old_rect->y2 += 1; - old_rect++; - } - rects -= crects; - region->data->numRects -= crects; - } - } - } - if(!same) - irect_prev_start = irect_line_start; - } - if (!region->data->numRects) - { - region->extents.x1 = region->extents.x2 = 0; - } - else - { - region->extents.y1 = PIXREGION_BOXPTR(region)->y1; - region->extents.y2 = PIXREGION_END(region)->y2; - if (region->data->numRects == 1) - { - free (region->data); - region->data = NULL; - } - } - - error: - return; -} +/*
+ * Copyright 1987, 1988, 1989, 1998 The Open Group
+ *
+ * Permission to use, copy, modify, distribute, and sell this software and its
+ * documentation for any purpose is hereby granted without fee, provided that
+ * the above copyright notice appear in all copies and that both that
+ * copyright notice and this permission notice appear in supporting
+ * documentation.
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ * OPEN GROUP BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN
+ * AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
+ *
+ * Except as contained in this notice, the name of The Open Group shall not be
+ * used in advertising or otherwise to promote the sale, use or other dealings
+ * in this Software without prior written authorization from The Open Group.
+ *
+ * Copyright 1987, 1988, 1989 by
+ * Digital Equipment Corporation, Maynard, Massachusetts.
+ *
+ * All Rights Reserved
+ *
+ * Permission to use, copy, modify, and distribute this software and its
+ * documentation for any purpose and without fee is hereby granted,
+ * provided that the above copyright notice appear in all copies and that
+ * both that copyright notice and this permission notice appear in
+ * supporting documentation, and that the name of Digital not be
+ * used in advertising or publicity pertaining to distribution of the
+ * software without specific, written prior permission.
+ *
+ * DIGITAL DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE, INCLUDING
+ * ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO EVENT SHALL
+ * DIGITAL BE LIABLE FOR ANY SPECIAL, INDIRECT OR CONSEQUENTIAL DAMAGES OR
+ * ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS,
+ * WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION,
+ * ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS
+ * SOFTWARE.
+ *
+ * Copyright © 1998 Keith Packard
+ *
+ * Permission to use, copy, modify, distribute, and sell this software and its
+ * documentation for any purpose is hereby granted without fee, provided that
+ * the above copyright notice appear in all copies and that both that
+ * copyright notice and this permission notice appear in supporting
+ * documentation, and that the name of Keith Packard not be used in
+ * advertising or publicity pertaining to distribution of the software without
+ * specific, written prior permission. Keith Packard makes no
+ * representations about the suitability of this software for any purpose. It
+ * is provided "as is" without express or implied warranty.
+ *
+ * KEITH PACKARD DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE,
+ * INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO
+ * EVENT SHALL KEITH PACKARD BE LIABLE FOR ANY SPECIAL, INDIRECT OR
+ * CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE,
+ * DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER
+ * TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
+ * PERFORMANCE OF THIS SOFTWARE.
+ */
+
+#include <stdlib.h>
+#include <limits.h>
+#include <string.h>
+#include <stdio.h>
+#include "pixman-private.h"
+
+#define PIXREGION_NIL(reg) ((reg)->data && !(reg)->data->numRects)
+/* not a region */
+#define PIXREGION_NAR(reg) ((reg)->data == pixman_broken_data)
+#define PIXREGION_NUMRECTS(reg) ((reg)->data ? (reg)->data->numRects : 1)
+#define PIXREGION_SIZE(reg) ((reg)->data ? (reg)->data->size : 0)
+#define PIXREGION_RECTS(reg) \
+ ((reg)->data ? (box_type_t *)((reg)->data + 1) \
+ : &(reg)->extents)
+#define PIXREGION_BOXPTR(reg) ((box_type_t *)((reg)->data + 1))
+#define PIXREGION_BOX(reg, i) (&PIXREGION_BOXPTR (reg)[i])
+#define PIXREGION_TOP(reg) PIXREGION_BOX (reg, (reg)->data->numRects)
+#define PIXREGION_END(reg) PIXREGION_BOX (reg, (reg)->data->numRects - 1)
+
+#define GOOD_RECT(rect) ((rect)->x1 < (rect)->x2 && (rect)->y1 < (rect)->y2)
+#define BAD_RECT(rect) ((rect)->x1 > (rect)->x2 || (rect)->y1 > (rect)->y2)
+
+#ifdef DEBUG
+
+#define GOOD(reg) \
+ do \
+ { \
+ if (!PREFIX (_selfcheck (reg))) \
+ _pixman_log_error (FUNC, "Malformed region " # reg); \
+ } while (0)
+
+#else
+
+#define GOOD(reg)
+
+#endif
+
+static const box_type_t PREFIX (_empty_box_) = { 0, 0, 0, 0 };
+static const region_data_type_t PREFIX (_empty_data_) = { 0, 0 };
+static const region_data_type_t PREFIX (_broken_data_) = { 0, 0 };
+
+static box_type_t *pixman_region_empty_box =
+ (box_type_t *)&PREFIX (_empty_box_);
+static region_data_type_t *pixman_region_empty_data =
+ (region_data_type_t *)&PREFIX (_empty_data_);
+static region_data_type_t *pixman_broken_data =
+ (region_data_type_t *)&PREFIX (_broken_data_);
+
+static pixman_bool_t
+pixman_break (region_type_t *region);
+
+/*
+ * The functions in this file implement the Region abstraction used extensively
+ * throughout the X11 sample server. A Region is simply a set of disjoint
+ * (non-overlapping) rectangles, plus an "extent" rectangle which is the
+ * smallest single rectangle that contains all the non-overlapping rectangles.
+ *
+ * A Region is implemented as a "y-x-banded" array of rectangles. This array
+ * imposes two degrees of order. First, all rectangles are sorted by top side
+ * y coordinate first (y1), and then by left side x coordinate (x1).
+ *
+ * Furthermore, the rectangles are grouped into "bands". Each rectangle in a
+ * band has the same top y coordinate (y1), and each has the same bottom y
+ * coordinate (y2). Thus all rectangles in a band differ only in their left
+ * and right side (x1 and x2). Bands are implicit in the array of rectangles:
+ * there is no separate list of band start pointers.
+ *
+ * The y-x band representation does not minimize rectangles. In particular,
+ * if a rectangle vertically crosses a band (the rectangle has scanlines in
+ * the y1 to y2 area spanned by the band), then the rectangle may be broken
+ * down into two or more smaller rectangles stacked one atop the other.
+ *
+ * ----------- -----------
+ * | | | | band 0
+ * | | -------- ----------- --------
+ * | | | | in y-x banded | | | | band 1
+ * | | | | form is | | | |
+ * ----------- | | ----------- --------
+ * | | | | band 2
+ * -------- --------
+ *
+ * An added constraint on the rectangles is that they must cover as much
+ * horizontal area as possible: no two rectangles within a band are allowed
+ * to touch.
+ *
+ * Whenever possible, bands will be merged together to cover a greater vertical
+ * distance (and thus reduce the number of rectangles). Two bands can be merged
+ * only if the bottom of one touches the top of the other and they have
+ * rectangles in the same places (of the same width, of course).
+ *
+ * Adam de Boor wrote most of the original region code. Joel McCormack
+ * substantially modified or rewrote most of the core arithmetic routines, and
+ * added pixman_region_validate in order to support several speed improvements
+ * to pixman_region_validate_tree. Bob Scheifler changed the representation
+ * to be more compact when empty or a single rectangle, and did a bunch of
+ * gratuitous reformatting. Carl Worth did further gratuitous reformatting
+ * while re-merging the server and client region code into libpixregion.
+ * Soren Sandmann did even more gratuitous reformatting.
+ */
+
+/* true iff two Boxes overlap */
+#define EXTENTCHECK(r1, r2) \
+ (!( ((r1)->x2 <= (r2)->x1) || \
+ ((r1)->x1 >= (r2)->x2) || \
+ ((r1)->y2 <= (r2)->y1) || \
+ ((r1)->y1 >= (r2)->y2) ) )
+
+/* true iff (x,y) is in Box */
+#define INBOX(r, x, y) \
+ ( ((r)->x2 > x) && \
+ ((r)->x1 <= x) && \
+ ((r)->y2 > y) && \
+ ((r)->y1 <= y) )
+
+/* true iff Box r1 contains Box r2 */
+#define SUBSUMES(r1, r2) \
+ ( ((r1)->x1 <= (r2)->x1) && \
+ ((r1)->x2 >= (r2)->x2) && \
+ ((r1)->y1 <= (r2)->y1) && \
+ ((r1)->y2 >= (r2)->y2) )
+
+static size_t
+PIXREGION_SZOF (size_t n)
+{
+ size_t size = n * sizeof(box_type_t);
+
+ if (n > UINT32_MAX / sizeof(box_type_t))
+ return 0;
+
+ if (sizeof(region_data_type_t) > UINT32_MAX - size)
+ return 0;
+
+ return size + sizeof(region_data_type_t);
+}
+
+static void *
+alloc_data (size_t n)
+{
+ size_t sz = PIXREGION_SZOF (n);
+
+ if (!sz)
+ return NULL;
+
+ return malloc (sz);
+}
+
+#define FREE_DATA(reg) if ((reg)->data && (reg)->data->size) free ((reg)->data)
+
+#define RECTALLOC_BAIL(region, n, bail) \
+ do \
+ { \
+ if (!(region)->data || \
+ (((region)->data->numRects + (n)) > (region)->data->size)) \
+ { \
+ if (!pixman_rect_alloc (region, n)) \
+ goto bail; \
+ } \
+ } while (0)
+
+#define RECTALLOC(region, n) \
+ do \
+ { \
+ if (!(region)->data || \
+ (((region)->data->numRects + (n)) > (region)->data->size)) \
+ { \
+ if (!pixman_rect_alloc (region, n)) { \
+ return FALSE; \
+ } \
+ } \
+ } while (0)
+
+#define ADDRECT(next_rect, nx1, ny1, nx2, ny2) \
+ do \
+ { \
+ next_rect->x1 = nx1; \
+ next_rect->y1 = ny1; \
+ next_rect->x2 = nx2; \
+ next_rect->y2 = ny2; \
+ next_rect++; \
+ } \
+ while (0)
+
+#define NEWRECT(region, next_rect, nx1, ny1, nx2, ny2) \
+ do \
+ { \
+ if (!(region)->data || \
+ ((region)->data->numRects == (region)->data->size)) \
+ { \
+ if (!pixman_rect_alloc (region, 1)) \
+ return FALSE; \
+ next_rect = PIXREGION_TOP (region); \
+ } \
+ ADDRECT (next_rect, nx1, ny1, nx2, ny2); \
+ region->data->numRects++; \
+ critical_if_fail (region->data->numRects <= region->data->size); \
+ } while (0)
+
+#define DOWNSIZE(reg, numRects) \
+ do \
+ { \
+ if (((numRects) < ((reg)->data->size >> 1)) && \
+ ((reg)->data->size > 50)) \
+ { \
+ region_data_type_t * new_data; \
+ size_t data_size = PIXREGION_SZOF (numRects); \
+ \
+ if (!data_size) \
+ { \
+ new_data = NULL; \
+ } \
+ else \
+ { \
+ new_data = (region_data_type_t *) \
+ realloc ((reg)->data, data_size); \
+ } \
+ \
+ if (new_data) \
+ { \
+ new_data->size = (numRects); \
+ (reg)->data = new_data; \
+ } \
+ } \
+ } while (0)
+
+PIXMAN_EXPORT pixman_bool_t
+PREFIX (_equal) (region_type_t *reg1, region_type_t *reg2)
+{
+ int i;
+ box_type_t *rects1;
+ box_type_t *rects2;
+
+ if (reg1->extents.x1 != reg2->extents.x1)
+ return FALSE;
+
+ if (reg1->extents.x2 != reg2->extents.x2)
+ return FALSE;
+
+ if (reg1->extents.y1 != reg2->extents.y1)
+ return FALSE;
+
+ if (reg1->extents.y2 != reg2->extents.y2)
+ return FALSE;
+
+ if (PIXREGION_NUMRECTS (reg1) != PIXREGION_NUMRECTS (reg2))
+ return FALSE;
+
+ rects1 = PIXREGION_RECTS (reg1);
+ rects2 = PIXREGION_RECTS (reg2);
+
+ for (i = 0; i != PIXREGION_NUMRECTS (reg1); i++)
+ {
+ if (rects1[i].x1 != rects2[i].x1)
+ return FALSE;
+
+ if (rects1[i].x2 != rects2[i].x2)
+ return FALSE;
+
+ if (rects1[i].y1 != rects2[i].y1)
+ return FALSE;
+
+ if (rects1[i].y2 != rects2[i].y2)
+ return FALSE;
+ }
+
+ return TRUE;
+}
+
+int
+PREFIX (_print) (region_type_t *rgn)
+{
+ int num, size;
+ int i;
+ box_type_t * rects;
+
+ num = PIXREGION_NUMRECTS (rgn);
+ size = PIXREGION_SIZE (rgn);
+ rects = PIXREGION_RECTS (rgn);
+
+ fprintf (stderr, "num: %d size: %d\n", num, size);
+ fprintf (stderr, "extents: %d %d %d %d\n",
+ rgn->extents.x1,
+ rgn->extents.y1,
+ rgn->extents.x2,
+ rgn->extents.y2);
+
+ for (i = 0; i < num; i++)
+ {
+ fprintf (stderr, "%d %d %d %d \n",
+ rects[i].x1, rects[i].y1, rects[i].x2, rects[i].y2);
+ }
+
+ fprintf (stderr, "\n");
+
+ return(num);
+}
+
+
+PIXMAN_EXPORT void
+PREFIX (_init) (region_type_t *region)
+{
+ region->extents = *pixman_region_empty_box;
+ region->data = pixman_region_empty_data;
+}
+
+PIXMAN_EXPORT void
+PREFIX (_init_rect) (region_type_t * region,
+ int x,
+ int y,
+ unsigned int width,
+ unsigned int height)
+{
+ region->extents.x1 = x;
+ region->extents.y1 = y;
+ region->extents.x2 = x + width;
+ region->extents.y2 = y + height;
+
+ if (!GOOD_RECT (®ion->extents))
+ {
+ if (BAD_RECT (®ion->extents))
+ _pixman_log_error (FUNC, "Invalid rectangle passed");
+ PREFIX (_init) (region);
+ return;
+ }
+
+ region->data = NULL;
+}
+
+PIXMAN_EXPORT void
+PREFIX (_init_with_extents) (region_type_t *region, box_type_t *extents)
+{
+ if (!GOOD_RECT (extents))
+ {
+ if (BAD_RECT (extents))
+ _pixman_log_error (FUNC, "Invalid rectangle passed");
+ PREFIX (_init) (region);
+ return;
+ }
+ region->extents = *extents;
+
+ region->data = NULL;
+}
+
+PIXMAN_EXPORT void
+PREFIX (_fini) (region_type_t *region)
+{
+ GOOD (region);
+ FREE_DATA (region);
+}
+
+PIXMAN_EXPORT int
+PREFIX (_n_rects) (region_type_t *region)
+{
+ return PIXREGION_NUMRECTS (region);
+}
+
+PIXMAN_EXPORT box_type_t *
+PREFIX (_rectangles) (region_type_t *region,
+ int *n_rects)
+{
+ if (n_rects)
+ *n_rects = PIXREGION_NUMRECTS (region);
+
+ return PIXREGION_RECTS (region);
+}
+
+static pixman_bool_t
+pixman_break (region_type_t *region)
+{
+ FREE_DATA (region);
+
+ region->extents = *pixman_region_empty_box;
+ region->data = pixman_broken_data;
+
+ return FALSE;
+}
+
+static pixman_bool_t
+pixman_rect_alloc (region_type_t * region,
+ int n)
+{
+ region_data_type_t *data;
+
+ if (!region->data)
+ {
+ n++;
+ region->data = alloc_data (n);
+
+ if (!region->data)
+ return pixman_break (region);
+
+ region->data->numRects = 1;
+ *PIXREGION_BOXPTR (region) = region->extents;
+ }
+ else if (!region->data->size)
+ {
+ region->data = alloc_data (n);
+
+ if (!region->data)
+ return pixman_break (region);
+
+ region->data->numRects = 0;
+ }
+ else
+ {
+ size_t data_size;
+
+ if (n == 1)
+ {
+ n = region->data->numRects;
+ if (n > 500) /* XXX pick numbers out of a hat */
+ n = 250;
+ }
+
+ n += region->data->numRects;
+ data_size = PIXREGION_SZOF (n);
+
+ if (!data_size)
+ {
+ data = NULL;
+ }
+ else
+ {
+ data = (region_data_type_t *)
+ realloc (region->data, PIXREGION_SZOF (n));
+ }
+
+ if (!data)
+ return pixman_break (region);
+
+ region->data = data;
+ }
+
+ region->data->size = n;
+
+ return TRUE;
+}
+
+PIXMAN_EXPORT pixman_bool_t
+PREFIX (_copy) (region_type_t *dst, region_type_t *src)
+{
+ GOOD (dst);
+ GOOD (src);
+
+ if (dst == src)
+ return TRUE;
+
+ dst->extents = src->extents;
+
+ if (!src->data || !src->data->size)
+ {
+ FREE_DATA (dst);
+ dst->data = src->data;
+ return TRUE;
+ }
+
+ if (!dst->data || (dst->data->size < src->data->numRects))
+ {
+ FREE_DATA (dst);
+
+ dst->data = alloc_data (src->data->numRects);
+
+ if (!dst->data)
+ return pixman_break (dst);
+
+ dst->data->size = src->data->numRects;
+ }
+
+ dst->data->numRects = src->data->numRects;
+
+ memmove ((char *)PIXREGION_BOXPTR (dst), (char *)PIXREGION_BOXPTR (src),
+ dst->data->numRects * sizeof(box_type_t));
+
+ return TRUE;
+}
+
+/*======================================================================
+ * Generic Region Operator
+ *====================================================================*/
+
+/*-
+ *-----------------------------------------------------------------------
+ * pixman_coalesce --
+ * Attempt to merge the boxes in the current band with those in the
+ * previous one. We are guaranteed that the current band extends to
+ * the end of the rects array. Used only by pixman_op.
+ *
+ * Results:
+ * The new index for the previous band.
+ *
+ * Side Effects:
+ * If coalescing takes place:
+ * - rectangles in the previous band will have their y2 fields
+ * altered.
+ * - region->data->numRects will be decreased.
+ *
+ *-----------------------------------------------------------------------
+ */
+static inline int
+pixman_coalesce (region_type_t * region, /* Region to coalesce */
+ int prev_start, /* Index of start of previous band */
+ int cur_start) /* Index of start of current band */
+{
+ box_type_t *prev_box; /* Current box in previous band */
+ box_type_t *cur_box; /* Current box in current band */
+ int numRects; /* Number rectangles in both bands */
+ int y2; /* Bottom of current band */
+
+ /*
+ * Figure out how many rectangles are in the band.
+ */
+ numRects = cur_start - prev_start;
+ critical_if_fail (numRects == region->data->numRects - cur_start);
+
+ if (!numRects) return cur_start;
+
+ /*
+ * The bands may only be coalesced if the bottom of the previous
+ * matches the top scanline of the current.
+ */
+ prev_box = PIXREGION_BOX (region, prev_start);
+ cur_box = PIXREGION_BOX (region, cur_start);
+ if (prev_box->y2 != cur_box->y1) return cur_start;
+
+ /*
+ * Make sure the bands have boxes in the same places. This
+ * assumes that boxes have been added in such a way that they
+ * cover the most area possible. I.e. two boxes in a band must
+ * have some horizontal space between them.
+ */
+ y2 = cur_box->y2;
+
+ do
+ {
+ if ((prev_box->x1 != cur_box->x1) || (prev_box->x2 != cur_box->x2))
+ return (cur_start);
+
+ prev_box++;
+ cur_box++;
+ numRects--;
+ }
+ while (numRects);
+
+ /*
+ * The bands may be merged, so set the bottom y of each box
+ * in the previous band to the bottom y of the current band.
+ */
+ numRects = cur_start - prev_start;
+ region->data->numRects -= numRects;
+
+ do
+ {
+ prev_box--;
+ prev_box->y2 = y2;
+ numRects--;
+ }
+ while (numRects);
+
+ return prev_start;
+}
+
+/* Quicky macro to avoid trivial reject procedure calls to pixman_coalesce */
+
+#define COALESCE(new_reg, prev_band, cur_band) \
+ do \
+ { \
+ if (cur_band - prev_band == new_reg->data->numRects - cur_band) \
+ prev_band = pixman_coalesce (new_reg, prev_band, cur_band); \
+ else \
+ prev_band = cur_band; \
+ } while (0)
+
+/*-
+ *-----------------------------------------------------------------------
+ * pixman_region_append_non_o --
+ * Handle a non-overlapping band for the union and subtract operations.
+ * Just adds the (top/bottom-clipped) rectangles into the region.
+ * Doesn't have to check for subsumption or anything.
+ *
+ * Results:
+ * None.
+ *
+ * Side Effects:
+ * region->data->numRects is incremented and the rectangles overwritten
+ * with the rectangles we're passed.
+ *
+ *-----------------------------------------------------------------------
+ */
+static inline pixman_bool_t
+pixman_region_append_non_o (region_type_t * region,
+ box_type_t * r,
+ box_type_t * r_end,
+ int y1,
+ int y2)
+{
+ box_type_t *next_rect;
+ int new_rects;
+
+ new_rects = r_end - r;
+
+ critical_if_fail (y1 < y2);
+ critical_if_fail (new_rects != 0);
+
+ /* Make sure we have enough space for all rectangles to be added */
+ RECTALLOC (region, new_rects);
+ next_rect = PIXREGION_TOP (region);
+ region->data->numRects += new_rects;
+
+ do
+ {
+ critical_if_fail (r->x1 < r->x2);
+ ADDRECT (next_rect, r->x1, y1, r->x2, y2);
+ r++;
+ }
+ while (r != r_end);
+
+ return TRUE;
+}
+
+#define FIND_BAND(r, r_band_end, r_end, ry1) \
+ do \
+ { \
+ ry1 = r->y1; \
+ r_band_end = r + 1; \
+ while ((r_band_end != r_end) && (r_band_end->y1 == ry1)) { \
+ r_band_end++; \
+ } \
+ } while (0)
+
+#define APPEND_REGIONS(new_reg, r, r_end) \
+ do \
+ { \
+ int new_rects; \
+ if ((new_rects = r_end - r)) { \
+ RECTALLOC_BAIL (new_reg, new_rects, bail); \
+ memmove ((char *)PIXREGION_TOP (new_reg), (char *)r, \
+ new_rects * sizeof(box_type_t)); \
+ new_reg->data->numRects += new_rects; \
+ } \
+ } while (0)
+
+/*-
+ *-----------------------------------------------------------------------
+ * pixman_op --
+ * Apply an operation to two regions. Called by pixman_region_union, pixman_region_inverse,
+ * pixman_region_subtract, pixman_region_intersect.... Both regions MUST have at least one
+ * rectangle, and cannot be the same object.
+ *
+ * Results:
+ * TRUE if successful.
+ *
+ * Side Effects:
+ * The new region is overwritten.
+ * overlap set to TRUE if overlap_func ever returns TRUE.
+ *
+ * Notes:
+ * The idea behind this function is to view the two regions as sets.
+ * Together they cover a rectangle of area that this function divides
+ * into horizontal bands where points are covered only by one region
+ * or by both. For the first case, the non_overlap_func is called with
+ * each the band and the band's upper and lower extents. For the
+ * second, the overlap_func is called to process the entire band. It
+ * is responsible for clipping the rectangles in the band, though
+ * this function provides the boundaries.
+ * At the end of each band, the new region is coalesced, if possible,
+ * to reduce the number of rectangles in the region.
+ *
+ *-----------------------------------------------------------------------
+ */
+
+typedef pixman_bool_t (*overlap_proc_ptr) (region_type_t *region,
+ box_type_t * r1,
+ box_type_t * r1_end,
+ box_type_t * r2,
+ box_type_t * r2_end,
+ int y1,
+ int y2,
+ int * overlap);
+
+static pixman_bool_t
+pixman_op (region_type_t * new_reg, /* Place to store result */
+ region_type_t * reg1, /* First region in operation */
+ region_type_t * reg2, /* 2d region in operation */
+ overlap_proc_ptr overlap_func, /* Function to call for over-
+ * lapping bands */
+ int append_non1, /* Append non-overlapping bands
+ * in region 1 ?
+ */
+ int append_non2, /* Append non-overlapping bands
+ * in region 2 ?
+ */
+ int * overlap)
+{
+ box_type_t *r1; /* Pointer into first region */
+ box_type_t *r2; /* Pointer into 2d region */
+ box_type_t *r1_end; /* End of 1st region */
+ box_type_t *r2_end; /* End of 2d region */
+ int ybot; /* Bottom of intersection */
+ int ytop; /* Top of intersection */
+ region_data_type_t *old_data; /* Old data for new_reg */
+ int prev_band; /* Index of start of
+ * previous band in new_reg */
+ int cur_band; /* Index of start of current
+ * band in new_reg */
+ box_type_t * r1_band_end; /* End of current band in r1 */
+ box_type_t * r2_band_end; /* End of current band in r2 */
+ int top; /* Top of non-overlapping band */
+ int bot; /* Bottom of non-overlapping band*/
+ int r1y1; /* Temps for r1->y1 and r2->y1 */
+ int r2y1;
+ int new_size;
+ int numRects;
+
+ /*
+ * Break any region computed from a broken region
+ */
+ if (PIXREGION_NAR (reg1) || PIXREGION_NAR (reg2))
+ return pixman_break (new_reg);
+
+ /*
+ * Initialization:
+ * set r1, r2, r1_end and r2_end appropriately, save the rectangles
+ * of the destination region until the end in case it's one of
+ * the two source regions, then mark the "new" region empty, allocating
+ * another array of rectangles for it to use.
+ */
+
+ r1 = PIXREGION_RECTS (reg1);
+ new_size = PIXREGION_NUMRECTS (reg1);
+ r1_end = r1 + new_size;
+
+ numRects = PIXREGION_NUMRECTS (reg2);
+ r2 = PIXREGION_RECTS (reg2);
+ r2_end = r2 + numRects;
+
+ critical_if_fail (r1 != r1_end);
+ critical_if_fail (r2 != r2_end);
+
+ old_data = (region_data_type_t *)NULL;
+
+ if (((new_reg == reg1) && (new_size > 1)) ||
+ ((new_reg == reg2) && (numRects > 1)))
+ {
+ old_data = new_reg->data;
+ new_reg->data = pixman_region_empty_data;
+ }
+
+ /* guess at new size */
+ if (numRects > new_size)
+ new_size = numRects;
+
+ new_size <<= 1;
+
+ if (!new_reg->data)
+ new_reg->data = pixman_region_empty_data;
+ else if (new_reg->data->size)
+ new_reg->data->numRects = 0;
+
+ if (new_size > new_reg->data->size)
+ {
+ if (!pixman_rect_alloc (new_reg, new_size))
+ {
+ if (old_data)
+ free (old_data);
+ return FALSE;
+ }
+ }
+
+ /*
+ * Initialize ybot.
+ * In the upcoming loop, ybot and ytop serve different functions depending
+ * on whether the band being handled is an overlapping or non-overlapping
+ * band.
+ * In the case of a non-overlapping band (only one of the regions
+ * has points in the band), ybot is the bottom of the most recent
+ * intersection and thus clips the top of the rectangles in that band.
+ * ytop is the top of the next intersection between the two regions and
+ * serves to clip the bottom of the rectangles in the current band.
+ * For an overlapping band (where the two regions intersect), ytop clips
+ * the top of the rectangles of both regions and ybot clips the bottoms.
+ */
+
+ ybot = MIN (r1->y1, r2->y1);
+
+ /*
+ * prev_band serves to mark the start of the previous band so rectangles
+ * can be coalesced into larger rectangles. qv. pixman_coalesce, above.
+ * In the beginning, there is no previous band, so prev_band == cur_band
+ * (cur_band is set later on, of course, but the first band will always
+ * start at index 0). prev_band and cur_band must be indices because of
+ * the possible expansion, and resultant moving, of the new region's
+ * array of rectangles.
+ */
+ prev_band = 0;
+
+ do
+ {
+ /*
+ * This algorithm proceeds one source-band (as opposed to a
+ * destination band, which is determined by where the two regions
+ * intersect) at a time. r1_band_end and r2_band_end serve to mark the
+ * rectangle after the last one in the current band for their
+ * respective regions.
+ */
+ critical_if_fail (r1 != r1_end);
+ critical_if_fail (r2 != r2_end);
+
+ FIND_BAND (r1, r1_band_end, r1_end, r1y1);
+ FIND_BAND (r2, r2_band_end, r2_end, r2y1);
+
+ /*
+ * First handle the band that doesn't intersect, if any.
+ *
+ * Note that attention is restricted to one band in the
+ * non-intersecting region at once, so if a region has n
+ * bands between the current position and the next place it overlaps
+ * the other, this entire loop will be passed through n times.
+ */
+ if (r1y1 < r2y1)
+ {
+ if (append_non1)
+ {
+ top = MAX (r1y1, ybot);
+ bot = MIN (r1->y2, r2y1);
+ if (top != bot)
+ {
+ cur_band = new_reg->data->numRects;
+ if (!pixman_region_append_non_o (new_reg, r1, r1_band_end, top, bot))
+ goto bail;
+ COALESCE (new_reg, prev_band, cur_band);
+ }
+ }
+ ytop = r2y1;
+ }
+ else if (r2y1 < r1y1)
+ {
+ if (append_non2)
+ {
+ top = MAX (r2y1, ybot);
+ bot = MIN (r2->y2, r1y1);
+
+ if (top != bot)
+ {
+ cur_band = new_reg->data->numRects;
+
+ if (!pixman_region_append_non_o (new_reg, r2, r2_band_end, top, bot))
+ goto bail;
+
+ COALESCE (new_reg, prev_band, cur_band);
+ }
+ }
+ ytop = r1y1;
+ }
+ else
+ {
+ ytop = r1y1;
+ }
+
+ /*
+ * Now see if we've hit an intersecting band. The two bands only
+ * intersect if ybot > ytop
+ */
+ ybot = MIN (r1->y2, r2->y2);
+ if (ybot > ytop)
+ {
+ cur_band = new_reg->data->numRects;
+
+ if (!(*overlap_func)(new_reg,
+ r1, r1_band_end,
+ r2, r2_band_end,
+ ytop, ybot,
+ overlap))
+ {
+ goto bail;
+ }
+
+ COALESCE (new_reg, prev_band, cur_band);
+ }
+
+ /*
+ * If we've finished with a band (y2 == ybot) we skip forward
+ * in the region to the next band.
+ */
+ if (r1->y2 == ybot)
+ r1 = r1_band_end;
+
+ if (r2->y2 == ybot)
+ r2 = r2_band_end;
+
+ }
+ while (r1 != r1_end && r2 != r2_end);
+
+ /*
+ * Deal with whichever region (if any) still has rectangles left.
+ *
+ * We only need to worry about banding and coalescing for the very first
+ * band left. After that, we can just group all remaining boxes,
+ * regardless of how many bands, into one final append to the list.
+ */
+
+ if ((r1 != r1_end) && append_non1)
+ {
+ /* Do first non_overlap1Func call, which may be able to coalesce */
+ FIND_BAND (r1, r1_band_end, r1_end, r1y1);
+
+ cur_band = new_reg->data->numRects;
+
+ if (!pixman_region_append_non_o (new_reg,
+ r1, r1_band_end,
+ MAX (r1y1, ybot), r1->y2))
+ {
+ goto bail;
+ }
+
+ COALESCE (new_reg, prev_band, cur_band);
+
+ /* Just append the rest of the boxes */
+ APPEND_REGIONS (new_reg, r1_band_end, r1_end);
+ }
+ else if ((r2 != r2_end) && append_non2)
+ {
+ /* Do first non_overlap2Func call, which may be able to coalesce */
+ FIND_BAND (r2, r2_band_end, r2_end, r2y1);
+
+ cur_band = new_reg->data->numRects;
+
+ if (!pixman_region_append_non_o (new_reg,
+ r2, r2_band_end,
+ MAX (r2y1, ybot), r2->y2))
+ {
+ goto bail;
+ }
+
+ COALESCE (new_reg, prev_band, cur_band);
+
+ /* Append rest of boxes */
+ APPEND_REGIONS (new_reg, r2_band_end, r2_end);
+ }
+
+ if (old_data)
+ free (old_data);
+
+ if (!(numRects = new_reg->data->numRects))
+ {
+ FREE_DATA (new_reg);
+ new_reg->data = pixman_region_empty_data;
+ }
+ else if (numRects == 1)
+ {
+ new_reg->extents = *PIXREGION_BOXPTR (new_reg);
+ FREE_DATA (new_reg);
+ new_reg->data = (region_data_type_t *)NULL;
+ }
+ else
+ {
+ DOWNSIZE (new_reg, numRects);
+ }
+
+ return TRUE;
+
+bail:
+ if (old_data)
+ free (old_data);
+
+ return pixman_break (new_reg);
+}
+
+/*-
+ *-----------------------------------------------------------------------
+ * pixman_set_extents --
+ * Reset the extents of a region to what they should be. Called by
+ * pixman_region_subtract and pixman_region_intersect as they can't
+ * figure it out along the way or do so easily, as pixman_region_union can.
+ *
+ * Results:
+ * None.
+ *
+ * Side Effects:
+ * The region's 'extents' structure is overwritten.
+ *
+ *-----------------------------------------------------------------------
+ */
+static void
+pixman_set_extents (region_type_t *region)
+{
+ box_type_t *box, *box_end;
+
+ if (!region->data)
+ return;
+
+ if (!region->data->size)
+ {
+ region->extents.x2 = region->extents.x1;
+ region->extents.y2 = region->extents.y1;
+ return;
+ }
+
+ box = PIXREGION_BOXPTR (region);
+ box_end = PIXREGION_END (region);
+
+ /*
+ * Since box is the first rectangle in the region, it must have the
+ * smallest y1 and since box_end is the last rectangle in the region,
+ * it must have the largest y2, because of banding. Initialize x1 and
+ * x2 from box and box_end, resp., as good things to initialize them
+ * to...
+ */
+ region->extents.x1 = box->x1;
+ region->extents.y1 = box->y1;
+ region->extents.x2 = box_end->x2;
+ region->extents.y2 = box_end->y2;
+
+ critical_if_fail (region->extents.y1 < region->extents.y2);
+
+ while (box <= box_end)
+ {
+ if (box->x1 < region->extents.x1)
+ region->extents.x1 = box->x1;
+ if (box->x2 > region->extents.x2)
+ region->extents.x2 = box->x2;
+ box++;
+ }
+
+ critical_if_fail (region->extents.x1 < region->extents.x2);
+}
+
+/*======================================================================
+ * Region Intersection
+ *====================================================================*/
+/*-
+ *-----------------------------------------------------------------------
+ * pixman_region_intersect_o --
+ * Handle an overlapping band for pixman_region_intersect.
+ *
+ * Results:
+ * TRUE if successful.
+ *
+ * Side Effects:
+ * Rectangles may be added to the region.
+ *
+ *-----------------------------------------------------------------------
+ */
+/*ARGSUSED*/
+static pixman_bool_t
+pixman_region_intersect_o (region_type_t *region,
+ box_type_t * r1,
+ box_type_t * r1_end,
+ box_type_t * r2,
+ box_type_t * r2_end,
+ int y1,
+ int y2,
+ int * overlap)
+{
+ int x1;
+ int x2;
+ box_type_t * next_rect;
+
+ next_rect = PIXREGION_TOP (region);
+
+ critical_if_fail (y1 < y2);
+ critical_if_fail (r1 != r1_end && r2 != r2_end);
+
+ do
+ {
+ x1 = MAX (r1->x1, r2->x1);
+ x2 = MIN (r1->x2, r2->x2);
+
+ /*
+ * If there's any overlap between the two rectangles, add that
+ * overlap to the new region.
+ */
+ if (x1 < x2)
+ NEWRECT (region, next_rect, x1, y1, x2, y2);
+
+ /*
+ * Advance the pointer(s) with the leftmost right side, since the next
+ * rectangle on that list may still overlap the other region's
+ * current rectangle.
+ */
+ if (r1->x2 == x2)
+ {
+ r1++;
+ }
+ if (r2->x2 == x2)
+ {
+ r2++;
+ }
+ }
+ while ((r1 != r1_end) && (r2 != r2_end));
+
+ return TRUE;
+}
+
+PIXMAN_EXPORT pixman_bool_t
+PREFIX (_intersect) (region_type_t * new_reg,
+ region_type_t * reg1,
+ region_type_t * reg2)
+{
+ GOOD (reg1);
+ GOOD (reg2);
+ GOOD (new_reg);
+
+ /* check for trivial reject */
+ if (PIXREGION_NIL (reg1) || PIXREGION_NIL (reg2) ||
+ !EXTENTCHECK (®1->extents, ®2->extents))
+ {
+ /* Covers about 20% of all cases */
+ FREE_DATA (new_reg);
+ new_reg->extents.x2 = new_reg->extents.x1;
+ new_reg->extents.y2 = new_reg->extents.y1;
+ if (PIXREGION_NAR (reg1) || PIXREGION_NAR (reg2))
+ {
+ new_reg->data = pixman_broken_data;
+ return FALSE;
+ }
+ else
+ {
+ new_reg->data = pixman_region_empty_data;
+ }
+ }
+ else if (!reg1->data && !reg2->data)
+ {
+ /* Covers about 80% of cases that aren't trivially rejected */
+ new_reg->extents.x1 = MAX (reg1->extents.x1, reg2->extents.x1);
+ new_reg->extents.y1 = MAX (reg1->extents.y1, reg2->extents.y1);
+ new_reg->extents.x2 = MIN (reg1->extents.x2, reg2->extents.x2);
+ new_reg->extents.y2 = MIN (reg1->extents.y2, reg2->extents.y2);
+
+ FREE_DATA (new_reg);
+
+ new_reg->data = (region_data_type_t *)NULL;
+ }
+ else if (!reg2->data && SUBSUMES (®2->extents, ®1->extents))
+ {
+ return PREFIX (_copy) (new_reg, reg1);
+ }
+ else if (!reg1->data && SUBSUMES (®1->extents, ®2->extents))
+ {
+ return PREFIX (_copy) (new_reg, reg2);
+ }
+ else if (reg1 == reg2)
+ {
+ return PREFIX (_copy) (new_reg, reg1);
+ }
+ else
+ {
+ /* General purpose intersection */
+ int overlap; /* result ignored */
+
+ if (!pixman_op (new_reg, reg1, reg2, pixman_region_intersect_o, FALSE, FALSE,
+ &overlap))
+ {
+ return FALSE;
+ }
+
+ pixman_set_extents (new_reg);
+ }
+
+ GOOD (new_reg);
+ return(TRUE);
+}
+
+#define MERGERECT(r) \
+ do \
+ { \
+ if (r->x1 <= x2) \
+ { \
+ /* Merge with current rectangle */ \
+ if (r->x1 < x2) \
+ *overlap = TRUE; \
+ \
+ if (x2 < r->x2) \
+ x2 = r->x2; \
+ } \
+ else \
+ { \
+ /* Add current rectangle, start new one */ \
+ NEWRECT (region, next_rect, x1, y1, x2, y2); \
+ x1 = r->x1; \
+ x2 = r->x2; \
+ } \
+ r++; \
+ } while (0)
+
+/*======================================================================
+ * Region Union
+ *====================================================================*/
+
+/*-
+ *-----------------------------------------------------------------------
+ * pixman_region_union_o --
+ * Handle an overlapping band for the union operation. Picks the
+ * left-most rectangle each time and merges it into the region.
+ *
+ * Results:
+ * TRUE if successful.
+ *
+ * Side Effects:
+ * region is overwritten.
+ * overlap is set to TRUE if any boxes overlap.
+ *
+ *-----------------------------------------------------------------------
+ */
+static pixman_bool_t
+pixman_region_union_o (region_type_t *region,
+ box_type_t * r1,
+ box_type_t * r1_end,
+ box_type_t * r2,
+ box_type_t * r2_end,
+ int y1,
+ int y2,
+ int * overlap)
+{
+ box_type_t *next_rect;
+ int x1; /* left and right side of current union */
+ int x2;
+
+ critical_if_fail (y1 < y2);
+ critical_if_fail (r1 != r1_end && r2 != r2_end);
+
+ next_rect = PIXREGION_TOP (region);
+
+ /* Start off current rectangle */
+ if (r1->x1 < r2->x1)
+ {
+ x1 = r1->x1;
+ x2 = r1->x2;
+ r1++;
+ }
+ else
+ {
+ x1 = r2->x1;
+ x2 = r2->x2;
+ r2++;
+ }
+ while (r1 != r1_end && r2 != r2_end)
+ {
+ if (r1->x1 < r2->x1)
+ MERGERECT (r1);
+ else
+ MERGERECT (r2);
+ }
+
+ /* Finish off whoever (if any) is left */
+ if (r1 != r1_end)
+ {
+ do
+ {
+ MERGERECT (r1);
+ }
+ while (r1 != r1_end);
+ }
+ else if (r2 != r2_end)
+ {
+ do
+ {
+ MERGERECT (r2);
+ }
+ while (r2 != r2_end);
+ }
+
+ /* Add current rectangle */
+ NEWRECT (region, next_rect, x1, y1, x2, y2);
+
+ return TRUE;
+}
+
+PIXMAN_EXPORT pixman_bool_t
+PREFIX(_intersect_rect) (region_type_t *dest,
+ region_type_t *source,
+ int x, int y,
+ unsigned int width,
+ unsigned int height)
+{
+ region_type_t region;
+
+ region.data = NULL;
+ region.extents.x1 = x;
+ region.extents.y1 = y;
+ region.extents.x2 = x + width;
+ region.extents.y2 = y + height;
+
+ return PREFIX(_intersect) (dest, source, ®ion);
+}
+
+/* Convenience function for performing union of region with a
+ * single rectangle
+ */
+PIXMAN_EXPORT pixman_bool_t
+PREFIX (_union_rect) (region_type_t *dest,
+ region_type_t *source,
+ int x,
+ int y,
+ unsigned int width,
+ unsigned int height)
+{
+ region_type_t region;
+
+ region.extents.x1 = x;
+ region.extents.y1 = y;
+ region.extents.x2 = x + width;
+ region.extents.y2 = y + height;
+
+ if (!GOOD_RECT (®ion.extents))
+ {
+ if (BAD_RECT (®ion.extents))
+ _pixman_log_error (FUNC, "Invalid rectangle passed");
+ return PREFIX (_copy) (dest, source);
+ }
+
+ region.data = NULL;
+
+ return PREFIX (_union) (dest, source, ®ion);
+}
+
+PIXMAN_EXPORT pixman_bool_t
+PREFIX (_union) (region_type_t *new_reg,
+ region_type_t *reg1,
+ region_type_t *reg2)
+{
+ int overlap; /* result ignored */
+
+ /* Return TRUE if some overlap
+ * between reg1, reg2
+ */
+ GOOD (reg1);
+ GOOD (reg2);
+ GOOD (new_reg);
+
+ /* checks all the simple cases */
+
+ /*
+ * Region 1 and 2 are the same
+ */
+ if (reg1 == reg2)
+ return PREFIX (_copy) (new_reg, reg1);
+
+ /*
+ * Region 1 is empty
+ */
+ if (PIXREGION_NIL (reg1))
+ {
+ if (PIXREGION_NAR (reg1))
+ return pixman_break (new_reg);
+
+ if (new_reg != reg2)
+ return PREFIX (_copy) (new_reg, reg2);
+
+ return TRUE;
+ }
+
+ /*
+ * Region 2 is empty
+ */
+ if (PIXREGION_NIL (reg2))
+ {
+ if (PIXREGION_NAR (reg2))
+ return pixman_break (new_reg);
+
+ if (new_reg != reg1)
+ return PREFIX (_copy) (new_reg, reg1);
+
+ return TRUE;
+ }
+
+ /*
+ * Region 1 completely subsumes region 2
+ */
+ if (!reg1->data && SUBSUMES (®1->extents, ®2->extents))
+ {
+ if (new_reg != reg1)
+ return PREFIX (_copy) (new_reg, reg1);
+
+ return TRUE;
+ }
+
+ /*
+ * Region 2 completely subsumes region 1
+ */
+ if (!reg2->data && SUBSUMES (®2->extents, ®1->extents))
+ {
+ if (new_reg != reg2)
+ return PREFIX (_copy) (new_reg, reg2);
+
+ return TRUE;
+ }
+
+ if (!pixman_op (new_reg, reg1, reg2, pixman_region_union_o, TRUE, TRUE, &overlap))
+ return FALSE;
+
+ new_reg->extents.x1 = MIN (reg1->extents.x1, reg2->extents.x1);
+ new_reg->extents.y1 = MIN (reg1->extents.y1, reg2->extents.y1);
+ new_reg->extents.x2 = MAX (reg1->extents.x2, reg2->extents.x2);
+ new_reg->extents.y2 = MAX (reg1->extents.y2, reg2->extents.y2);
+
+ GOOD (new_reg);
+
+ return TRUE;
+}
+
+/*======================================================================
+ * Batch Rectangle Union
+ *====================================================================*/
+
+#define EXCHANGE_RECTS(a, b) \
+ { \
+ box_type_t t; \
+ t = rects[a]; \
+ rects[a] = rects[b]; \
+ rects[b] = t; \
+ }
+
+static void
+quick_sort_rects (
+ box_type_t rects[],
+ int numRects)
+{
+ int y1;
+ int x1;
+ int i, j;
+ box_type_t *r;
+
+ /* Always called with numRects > 1 */
+
+ do
+ {
+ if (numRects == 2)
+ {
+ if (rects[0].y1 > rects[1].y1 ||
+ (rects[0].y1 == rects[1].y1 && rects[0].x1 > rects[1].x1))
+ {
+ EXCHANGE_RECTS (0, 1);
+ }
+
+ return;
+ }
+
+ /* Choose partition element, stick in location 0 */
+ EXCHANGE_RECTS (0, numRects >> 1);
+ y1 = rects[0].y1;
+ x1 = rects[0].x1;
+
+ /* Partition array */
+ i = 0;
+ j = numRects;
+
+ do
+ {
+ r = &(rects[i]);
+ do
+ {
+ r++;
+ i++;
+ }
+
+ while (i != numRects && (r->y1 < y1 || (r->y1 == y1 && r->x1 < x1)))
+ ;
+
+ r = &(rects[j]);
+ do
+ {
+ r--;
+ j--;
+ }
+ while (y1 < r->y1 || (y1 == r->y1 && x1 < r->x1));
+
+ if (i < j)
+ EXCHANGE_RECTS (i, j);
+ }
+ while (i < j);
+
+ /* Move partition element back to middle */
+ EXCHANGE_RECTS (0, j);
+
+ /* Recurse */
+ if (numRects - j - 1 > 1)
+ quick_sort_rects (&rects[j + 1], numRects - j - 1);
+
+ numRects = j;
+ }
+ while (numRects > 1);
+}
+
+/*-
+ *-----------------------------------------------------------------------
+ * pixman_region_validate --
+ *
+ * Take a ``region'' which is a non-y-x-banded random collection of
+ * rectangles, and compute a nice region which is the union of all the
+ * rectangles.
+ *
+ * Results:
+ * TRUE if successful.
+ *
+ * Side Effects:
+ * The passed-in ``region'' may be modified.
+ * overlap set to TRUE if any retangles overlapped,
+ * else FALSE;
+ *
+ * Strategy:
+ * Step 1. Sort the rectangles into ascending order with primary key y1
+ * and secondary key x1.
+ *
+ * Step 2. Split the rectangles into the minimum number of proper y-x
+ * banded regions. This may require horizontally merging
+ * rectangles, and vertically coalescing bands. With any luck,
+ * this step in an identity transformation (ala the Box widget),
+ * or a coalescing into 1 box (ala Menus).
+ *
+ * Step 3. Merge the separate regions down to a single region by calling
+ * pixman_region_union. Maximize the work each pixman_region_union call does by using
+ * a binary merge.
+ *
+ *-----------------------------------------------------------------------
+ */
+
+static pixman_bool_t
+validate (region_type_t * badreg,
+ int * overlap)
+{
+ /* Descriptor for regions under construction in Step 2. */
+ typedef struct
+ {
+ region_type_t reg;
+ int prev_band;
+ int cur_band;
+ } region_info_t;
+
+ region_info_t stack_regions[64];
+
+ int numRects; /* Original numRects for badreg */
+ region_info_t *ri; /* Array of current regions */
+ int num_ri; /* Number of entries used in ri */
+ int size_ri; /* Number of entries available in ri */
+ int i; /* Index into rects */
+ int j; /* Index into ri */
+ region_info_t *rit; /* &ri[j] */
+ region_type_t *reg; /* ri[j].reg */
+ box_type_t *box; /* Current box in rects */
+ box_type_t *ri_box; /* Last box in ri[j].reg */
+ region_type_t *hreg; /* ri[j_half].reg */
+ pixman_bool_t ret = TRUE;
+
+ *overlap = FALSE;
+ if (!badreg->data)
+ {
+ GOOD (badreg);
+ return TRUE;
+ }
+
+ numRects = badreg->data->numRects;
+ if (!numRects)
+ {
+ if (PIXREGION_NAR (badreg))
+ return FALSE;
+ GOOD (badreg);
+ return TRUE;
+ }
+
+ if (badreg->extents.x1 < badreg->extents.x2)
+ {
+ if ((numRects) == 1)
+ {
+ FREE_DATA (badreg);
+ badreg->data = (region_data_type_t *) NULL;
+ }
+ else
+ {
+ DOWNSIZE (badreg, numRects);
+ }
+
+ GOOD (badreg);
+
+ return TRUE;
+ }
+
+ /* Step 1: Sort the rects array into ascending (y1, x1) order */
+ quick_sort_rects (PIXREGION_BOXPTR (badreg), numRects);
+
+ /* Step 2: Scatter the sorted array into the minimum number of regions */
+
+ /* Set up the first region to be the first rectangle in badreg */
+ /* Note that step 2 code will never overflow the ri[0].reg rects array */
+ ri = stack_regions;
+ size_ri = sizeof (stack_regions) / sizeof (stack_regions[0]);
+ num_ri = 1;
+ ri[0].prev_band = 0;
+ ri[0].cur_band = 0;
+ ri[0].reg = *badreg;
+ box = PIXREGION_BOXPTR (&ri[0].reg);
+ ri[0].reg.extents = *box;
+ ri[0].reg.data->numRects = 1;
+ badreg->extents = *pixman_region_empty_box;
+ badreg->data = pixman_region_empty_data;
+
+ /* Now scatter rectangles into the minimum set of valid regions. If the
+ * next rectangle to be added to a region would force an existing rectangle
+ * in the region to be split up in order to maintain y-x banding, just
+ * forget it. Try the next region. If it doesn't fit cleanly into any
+ * region, make a new one.
+ */
+
+ for (i = numRects; --i > 0;)
+ {
+ box++;
+ /* Look for a region to append box to */
+ for (j = num_ri, rit = ri; --j >= 0; rit++)
+ {
+ reg = &rit->reg;
+ ri_box = PIXREGION_END (reg);
+
+ if (box->y1 == ri_box->y1 && box->y2 == ri_box->y2)
+ {
+ /* box is in same band as ri_box. Merge or append it */
+ if (box->x1 <= ri_box->x2)
+ {
+ /* Merge it with ri_box */
+ if (box->x1 < ri_box->x2)
+ *overlap = TRUE;
+
+ if (box->x2 > ri_box->x2)
+ ri_box->x2 = box->x2;
+ }
+ else
+ {
+ RECTALLOC_BAIL (reg, 1, bail);
+ *PIXREGION_TOP (reg) = *box;
+ reg->data->numRects++;
+ }
+
+ goto next_rect; /* So sue me */
+ }
+ else if (box->y1 >= ri_box->y2)
+ {
+ /* Put box into new band */
+ if (reg->extents.x2 < ri_box->x2)
+ reg->extents.x2 = ri_box->x2;
+
+ if (reg->extents.x1 > box->x1)
+ reg->extents.x1 = box->x1;
+
+ COALESCE (reg, rit->prev_band, rit->cur_band);
+ rit->cur_band = reg->data->numRects;
+ RECTALLOC_BAIL (reg, 1, bail);
+ *PIXREGION_TOP (reg) = *box;
+ reg->data->numRects++;
+
+ goto next_rect;
+ }
+ /* Well, this region was inappropriate. Try the next one. */
+ } /* for j */
+
+ /* Uh-oh. No regions were appropriate. Create a new one. */
+ if (size_ri == num_ri)
+ {
+ size_t data_size;
+
+ /* Oops, allocate space for new region information */
+ size_ri <<= 1;
+
+ data_size = size_ri * sizeof(region_info_t);
+ if (data_size / size_ri != sizeof(region_info_t))
+ goto bail;
+
+ if (ri == stack_regions)
+ {
+ rit = malloc (data_size);
+ if (!rit)
+ goto bail;
+ memcpy (rit, ri, num_ri * sizeof (region_info_t));
+ }
+ else
+ {
+ rit = (region_info_t *) realloc (ri, data_size);
+ if (!rit)
+ goto bail;
+ }
+ ri = rit;
+ rit = &ri[num_ri];
+ }
+ num_ri++;
+ rit->prev_band = 0;
+ rit->cur_band = 0;
+ rit->reg.extents = *box;
+ rit->reg.data = (region_data_type_t *)NULL;
+
+ /* MUST force allocation */
+ if (!pixman_rect_alloc (&rit->reg, (i + num_ri) / num_ri))
+ goto bail;
+
+ next_rect: ;
+ } /* for i */
+
+ /* Make a final pass over each region in order to COALESCE and set
+ * extents.x2 and extents.y2
+ */
+ for (j = num_ri, rit = ri; --j >= 0; rit++)
+ {
+ reg = &rit->reg;
+ ri_box = PIXREGION_END (reg);
+ reg->extents.y2 = ri_box->y2;
+
+ if (reg->extents.x2 < ri_box->x2)
+ reg->extents.x2 = ri_box->x2;
+
+ COALESCE (reg, rit->prev_band, rit->cur_band);
+
+ if (reg->data->numRects == 1) /* keep unions happy below */
+ {
+ FREE_DATA (reg);
+ reg->data = (region_data_type_t *)NULL;
+ }
+ }
+
+ /* Step 3: Union all regions into a single region */
+ while (num_ri > 1)
+ {
+ int half = num_ri / 2;
+ for (j = num_ri & 1; j < (half + (num_ri & 1)); j++)
+ {
+ reg = &ri[j].reg;
+ hreg = &ri[j + half].reg;
+
+ if (!pixman_op (reg, reg, hreg, pixman_region_union_o, TRUE, TRUE, overlap))
+ ret = FALSE;
+
+ if (hreg->extents.x1 < reg->extents.x1)
+ reg->extents.x1 = hreg->extents.x1;
+
+ if (hreg->extents.y1 < reg->extents.y1)
+ reg->extents.y1 = hreg->extents.y1;
+
+ if (hreg->extents.x2 > reg->extents.x2)
+ reg->extents.x2 = hreg->extents.x2;
+
+ if (hreg->extents.y2 > reg->extents.y2)
+ reg->extents.y2 = hreg->extents.y2;
+
+ FREE_DATA (hreg);
+ }
+
+ num_ri -= half;
+
+ if (!ret)
+ goto bail;
+ }
+
+ *badreg = ri[0].reg;
+
+ if (ri != stack_regions)
+ free (ri);
+
+ GOOD (badreg);
+ return ret;
+
+bail:
+ for (i = 0; i < num_ri; i++)
+ FREE_DATA (&ri[i].reg);
+
+ if (ri != stack_regions)
+ free (ri);
+
+ return pixman_break (badreg);
+}
+
+/*======================================================================
+ * Region Subtraction
+ *====================================================================*/
+
+/*-
+ *-----------------------------------------------------------------------
+ * pixman_region_subtract_o --
+ * Overlapping band subtraction. x1 is the left-most point not yet
+ * checked.
+ *
+ * Results:
+ * TRUE if successful.
+ *
+ * Side Effects:
+ * region may have rectangles added to it.
+ *
+ *-----------------------------------------------------------------------
+ */
+/*ARGSUSED*/
+static pixman_bool_t
+pixman_region_subtract_o (region_type_t * region,
+ box_type_t * r1,
+ box_type_t * r1_end,
+ box_type_t * r2,
+ box_type_t * r2_end,
+ int y1,
+ int y2,
+ int * overlap)
+{
+ box_type_t * next_rect;
+ int x1;
+
+ x1 = r1->x1;
+
+ critical_if_fail (y1 < y2);
+ critical_if_fail (r1 != r1_end && r2 != r2_end);
+
+ next_rect = PIXREGION_TOP (region);
+
+ do
+ {
+ if (r2->x2 <= x1)
+ {
+ /*
+ * Subtrahend entirely to left of minuend: go to next subtrahend.
+ */
+ r2++;
+ }
+ else if (r2->x1 <= x1)
+ {
+ /*
+ * Subtrahend preceeds minuend: nuke left edge of minuend.
+ */
+ x1 = r2->x2;
+ if (x1 >= r1->x2)
+ {
+ /*
+ * Minuend completely covered: advance to next minuend and
+ * reset left fence to edge of new minuend.
+ */
+ r1++;
+ if (r1 != r1_end)
+ x1 = r1->x1;
+ }
+ else
+ {
+ /*
+ * Subtrahend now used up since it doesn't extend beyond
+ * minuend
+ */
+ r2++;
+ }
+ }
+ else if (r2->x1 < r1->x2)
+ {
+ /*
+ * Left part of subtrahend covers part of minuend: add uncovered
+ * part of minuend to region and skip to next subtrahend.
+ */
+ critical_if_fail (x1 < r2->x1);
+ NEWRECT (region, next_rect, x1, y1, r2->x1, y2);
+
+ x1 = r2->x2;
+ if (x1 >= r1->x2)
+ {
+ /*
+ * Minuend used up: advance to new...
+ */
+ r1++;
+ if (r1 != r1_end)
+ x1 = r1->x1;
+ }
+ else
+ {
+ /*
+ * Subtrahend used up
+ */
+ r2++;
+ }
+ }
+ else
+ {
+ /*
+ * Minuend used up: add any remaining piece before advancing.
+ */
+ if (r1->x2 > x1)
+ NEWRECT (region, next_rect, x1, y1, r1->x2, y2);
+
+ r1++;
+
+ if (r1 != r1_end)
+ x1 = r1->x1;
+ }
+ }
+ while ((r1 != r1_end) && (r2 != r2_end));
+
+ /*
+ * Add remaining minuend rectangles to region.
+ */
+ while (r1 != r1_end)
+ {
+ critical_if_fail (x1 < r1->x2);
+
+ NEWRECT (region, next_rect, x1, y1, r1->x2, y2);
+
+ r1++;
+ if (r1 != r1_end)
+ x1 = r1->x1;
+ }
+ return TRUE;
+}
+
+/*-
+ *-----------------------------------------------------------------------
+ * pixman_region_subtract --
+ * Subtract reg_s from reg_m and leave the result in reg_d.
+ * S stands for subtrahend, M for minuend and D for difference.
+ *
+ * Results:
+ * TRUE if successful.
+ *
+ * Side Effects:
+ * reg_d is overwritten.
+ *
+ *-----------------------------------------------------------------------
+ */
+PIXMAN_EXPORT pixman_bool_t
+PREFIX (_subtract) (region_type_t *reg_d,
+ region_type_t *reg_m,
+ region_type_t *reg_s)
+{
+ int overlap; /* result ignored */
+
+ GOOD (reg_m);
+ GOOD (reg_s);
+ GOOD (reg_d);
+
+ /* check for trivial rejects */
+ if (PIXREGION_NIL (reg_m) || PIXREGION_NIL (reg_s) ||
+ !EXTENTCHECK (®_m->extents, ®_s->extents))
+ {
+ if (PIXREGION_NAR (reg_s))
+ return pixman_break (reg_d);
+
+ return PREFIX (_copy) (reg_d, reg_m);
+ }
+ else if (reg_m == reg_s)
+ {
+ FREE_DATA (reg_d);
+ reg_d->extents.x2 = reg_d->extents.x1;
+ reg_d->extents.y2 = reg_d->extents.y1;
+ reg_d->data = pixman_region_empty_data;
+
+ return TRUE;
+ }
+
+ /* Add those rectangles in region 1 that aren't in region 2,
+ do yucky substraction for overlaps, and
+ just throw away rectangles in region 2 that aren't in region 1 */
+ if (!pixman_op (reg_d, reg_m, reg_s, pixman_region_subtract_o, TRUE, FALSE, &overlap))
+ return FALSE;
+
+ /*
+ * Can't alter reg_d's extents before we call pixman_op because
+ * it might be one of the source regions and pixman_op depends
+ * on the extents of those regions being unaltered. Besides, this
+ * way there's no checking against rectangles that will be nuked
+ * due to coalescing, so we have to examine fewer rectangles.
+ */
+ pixman_set_extents (reg_d);
+ GOOD (reg_d);
+ return TRUE;
+}
+
+/*======================================================================
+ * Region Inversion
+ *====================================================================*/
+
+/*-
+ *-----------------------------------------------------------------------
+ * pixman_region_inverse --
+ * Take a region and a box and return a region that is everything
+ * in the box but not in the region. The careful reader will note
+ * that this is the same as subtracting the region from the box...
+ *
+ * Results:
+ * TRUE.
+ *
+ * Side Effects:
+ * new_reg is overwritten.
+ *
+ *-----------------------------------------------------------------------
+ */
+pixman_bool_t
+PIXMAN_EXPORT PREFIX (_inverse) (region_type_t *new_reg, /* Destination region */
+ region_type_t *reg1, /* Region to invert */
+ box_type_t * inv_rect) /* Bounding box for inversion */
+{
+ region_type_t inv_reg; /* Quick and dirty region made from the
+ * bounding box */
+ int overlap; /* result ignored */
+
+ GOOD (reg1);
+ GOOD (new_reg);
+
+ /* check for trivial rejects */
+ if (PIXREGION_NIL (reg1) || !EXTENTCHECK (inv_rect, ®1->extents))
+ {
+ if (PIXREGION_NAR (reg1))
+ return pixman_break (new_reg);
+
+ new_reg->extents = *inv_rect;
+ FREE_DATA (new_reg);
+ new_reg->data = (region_data_type_t *)NULL;
+
+ return TRUE;
+ }
+
+ /* Add those rectangles in region 1 that aren't in region 2,
+ * do yucky substraction for overlaps, and
+ * just throw away rectangles in region 2 that aren't in region 1
+ */
+ inv_reg.extents = *inv_rect;
+ inv_reg.data = (region_data_type_t *)NULL;
+ if (!pixman_op (new_reg, &inv_reg, reg1, pixman_region_subtract_o, TRUE, FALSE, &overlap))
+ return FALSE;
+
+ /*
+ * Can't alter new_reg's extents before we call pixman_op because
+ * it might be one of the source regions and pixman_op depends
+ * on the extents of those regions being unaltered. Besides, this
+ * way there's no checking against rectangles that will be nuked
+ * due to coalescing, so we have to examine fewer rectangles.
+ */
+ pixman_set_extents (new_reg);
+ GOOD (new_reg);
+ return TRUE;
+}
+
+/*
+ * rect_in(region, rect)
+ * This routine takes a pointer to a region and a pointer to a box
+ * and determines if the box is outside/inside/partly inside the region.
+ *
+ * The idea is to travel through the list of rectangles trying to cover the
+ * passed box with them. Anytime a piece of the rectangle isn't covered
+ * by a band of rectangles, part_out is set TRUE. Any time a rectangle in
+ * the region covers part of the box, part_in is set TRUE. The process ends
+ * when either the box has been completely covered (we reached a band that
+ * doesn't overlap the box, part_in is TRUE and part_out is false), the
+ * box has been partially covered (part_in == part_out == TRUE -- because of
+ * the banding, the first time this is true we know the box is only
+ * partially in the region) or is outside the region (we reached a band
+ * that doesn't overlap the box at all and part_in is false)
+ */
+
+pixman_region_overlap_t
+PIXMAN_EXPORT PREFIX (_contains_rectangle) (region_type_t * region,
+ box_type_t * prect)
+{
+ box_type_t * pbox;
+ box_type_t * pbox_end;
+ int part_in, part_out;
+ int numRects;
+ int x, y;
+
+ GOOD (region);
+
+ numRects = PIXREGION_NUMRECTS (region);
+
+ /* useful optimization */
+ if (!numRects || !EXTENTCHECK (®ion->extents, prect))
+ return(PIXMAN_REGION_OUT);
+
+ if (numRects == 1)
+ {
+ /* We know that it must be PIXMAN_REGION_IN or PIXMAN_REGION_PART */
+ if (SUBSUMES (®ion->extents, prect))
+ return(PIXMAN_REGION_IN);
+ else
+ return(PIXMAN_REGION_PART);
+ }
+
+ part_out = FALSE;
+ part_in = FALSE;
+
+ /* (x,y) starts at upper left of rect, moving to the right and down */
+ x = prect->x1;
+ y = prect->y1;
+
+ /* can stop when both part_out and part_in are TRUE, or we reach prect->y2 */
+ for (pbox = PIXREGION_BOXPTR (region), pbox_end = pbox + numRects;
+ pbox != pbox_end;
+ pbox++)
+ {
+
+ if (pbox->y2 <= y)
+ continue; /* getting up to speed or skipping remainder of band */
+
+ if (pbox->y1 > y)
+ {
+ part_out = TRUE; /* missed part of rectangle above */
+ if (part_in || (pbox->y1 >= prect->y2))
+ break;
+ y = pbox->y1; /* x guaranteed to be == prect->x1 */
+ }
+
+ if (pbox->x2 <= x)
+ continue; /* not far enough over yet */
+
+ if (pbox->x1 > x)
+ {
+ part_out = TRUE; /* missed part of rectangle to left */
+ if (part_in)
+ break;
+ }
+
+ if (pbox->x1 < prect->x2)
+ {
+ part_in = TRUE; /* definitely overlap */
+ if (part_out)
+ break;
+ }
+
+ if (pbox->x2 >= prect->x2)
+ {
+ y = pbox->y2; /* finished with this band */
+ if (y >= prect->y2)
+ break;
+ x = prect->x1; /* reset x out to left again */
+ }
+ else
+ {
+ /*
+ * Because boxes in a band are maximal width, if the first box
+ * to overlap the rectangle doesn't completely cover it in that
+ * band, the rectangle must be partially out, since some of it
+ * will be uncovered in that band. part_in will have been set true
+ * by now...
+ */
+ part_out = TRUE;
+ break;
+ }
+ }
+
+ if (part_in)
+ {
+ if (y < prect->y2)
+ return PIXMAN_REGION_PART;
+ else
+ return PIXMAN_REGION_IN;
+ }
+ else
+ {
+ return PIXMAN_REGION_OUT;
+ }
+}
+
+/* PREFIX(_translate) (region, x, y)
+ * translates in place
+ */
+
+PIXMAN_EXPORT void
+PREFIX (_translate) (region_type_t *region, int x, int y)
+{
+ int x1, x2, y1, y2;
+ int nbox;
+ box_type_t * pbox;
+
+ GOOD (region);
+ region->extents.x1 = x1 = region->extents.x1 + x;
+ region->extents.y1 = y1 = region->extents.y1 + y;
+ region->extents.x2 = x2 = region->extents.x2 + x;
+ region->extents.y2 = y2 = region->extents.y2 + y;
+
+ if (((x1 - SHRT_MIN) | (y1 - SHRT_MIN) | (SHRT_MAX - x2) | (SHRT_MAX - y2)) >= 0)
+ {
+ if (region->data && (nbox = region->data->numRects))
+ {
+ for (pbox = PIXREGION_BOXPTR (region); nbox--; pbox++)
+ {
+ pbox->x1 += x;
+ pbox->y1 += y;
+ pbox->x2 += x;
+ pbox->y2 += y;
+ }
+ }
+ return;
+ }
+
+ if (((x2 - SHRT_MIN) | (y2 - SHRT_MIN) | (SHRT_MAX - x1) | (SHRT_MAX - y1)) <= 0)
+ {
+ region->extents.x2 = region->extents.x1;
+ region->extents.y2 = region->extents.y1;
+ FREE_DATA (region);
+ region->data = pixman_region_empty_data;
+ return;
+ }
+
+ if (x1 < SHRT_MIN)
+ region->extents.x1 = SHRT_MIN;
+ else if (x2 > SHRT_MAX)
+ region->extents.x2 = SHRT_MAX;
+
+ if (y1 < SHRT_MIN)
+ region->extents.y1 = SHRT_MIN;
+ else if (y2 > SHRT_MAX)
+ region->extents.y2 = SHRT_MAX;
+
+ if (region->data && (nbox = region->data->numRects))
+ {
+ box_type_t * pbox_out;
+
+ for (pbox_out = pbox = PIXREGION_BOXPTR (region); nbox--; pbox++)
+ {
+ pbox_out->x1 = x1 = pbox->x1 + x;
+ pbox_out->y1 = y1 = pbox->y1 + y;
+ pbox_out->x2 = x2 = pbox->x2 + x;
+ pbox_out->y2 = y2 = pbox->y2 + y;
+
+ if (((x2 - SHRT_MIN) | (y2 - SHRT_MIN) |
+ (SHRT_MAX - x1) | (SHRT_MAX - y1)) <= 0)
+ {
+ region->data->numRects--;
+ continue;
+ }
+
+ if (x1 < SHRT_MIN)
+ pbox_out->x1 = SHRT_MIN;
+ else if (x2 > SHRT_MAX)
+ pbox_out->x2 = SHRT_MAX;
+
+ if (y1 < SHRT_MIN)
+ pbox_out->y1 = SHRT_MIN;
+ else if (y2 > SHRT_MAX)
+ pbox_out->y2 = SHRT_MAX;
+
+ pbox_out++;
+ }
+
+ if (pbox_out != pbox)
+ {
+ if (region->data->numRects == 1)
+ {
+ region->extents = *PIXREGION_BOXPTR (region);
+ FREE_DATA (region);
+ region->data = (region_data_type_t *)NULL;
+ }
+ else
+ {
+ pixman_set_extents (region);
+ }
+ }
+ }
+
+ GOOD (region);
+}
+
+PIXMAN_EXPORT void
+PREFIX (_reset) (region_type_t *region, box_type_t *box)
+{
+ GOOD (region);
+
+ critical_if_fail (GOOD_RECT (box));
+
+ region->extents = *box;
+
+ FREE_DATA (region);
+
+ region->data = NULL;
+}
+
+/* box is "return" value */
+PIXMAN_EXPORT int
+PREFIX (_contains_point) (region_type_t * region,
+ int x, int y,
+ box_type_t * box)
+{
+ box_type_t *pbox, *pbox_end;
+ int numRects;
+
+ GOOD (region);
+ numRects = PIXREGION_NUMRECTS (region);
+
+ if (!numRects || !INBOX (®ion->extents, x, y))
+ return(FALSE);
+
+ if (numRects == 1)
+ {
+ if (box)
+ *box = region->extents;
+
+ return(TRUE);
+ }
+
+ for (pbox = PIXREGION_BOXPTR (region), pbox_end = pbox + numRects;
+ pbox != pbox_end;
+ pbox++)
+ {
+ if (y >= pbox->y2)
+ continue; /* not there yet */
+
+ if ((y < pbox->y1) || (x < pbox->x1))
+ break; /* missed it */
+
+ if (x >= pbox->x2)
+ continue; /* not there yet */
+
+ if (box)
+ *box = *pbox;
+
+ return(TRUE);
+ }
+
+ return(FALSE);
+}
+
+PIXMAN_EXPORT int
+PREFIX (_not_empty) (region_type_t * region)
+{
+ GOOD (region);
+
+ return(!PIXREGION_NIL (region));
+}
+
+PIXMAN_EXPORT box_type_t *
+PREFIX (_extents) (region_type_t * region)
+{
+ GOOD (region);
+
+ return(®ion->extents);
+}
+
+/*
+ * Clip a list of scanlines to a region. The caller has allocated the
+ * space. FSorted is non-zero if the scanline origins are in ascending order.
+ *
+ * returns the number of new, clipped scanlines.
+ */
+
+PIXMAN_EXPORT pixman_bool_t
+PREFIX (_selfcheck) (region_type_t *reg)
+{
+ int i, numRects;
+
+ if ((reg->extents.x1 > reg->extents.x2) ||
+ (reg->extents.y1 > reg->extents.y2))
+ {
+ return FALSE;
+ }
+
+ numRects = PIXREGION_NUMRECTS (reg);
+ if (!numRects)
+ {
+ return ((reg->extents.x1 == reg->extents.x2) &&
+ (reg->extents.y1 == reg->extents.y2) &&
+ (reg->data->size || (reg->data == pixman_region_empty_data)));
+ }
+ else if (numRects == 1)
+ {
+ return (!reg->data);
+ }
+ else
+ {
+ box_type_t * pbox_p, * pbox_n;
+ box_type_t box;
+
+ pbox_p = PIXREGION_RECTS (reg);
+ box = *pbox_p;
+ box.y2 = pbox_p[numRects - 1].y2;
+ pbox_n = pbox_p + 1;
+
+ for (i = numRects; --i > 0; pbox_p++, pbox_n++)
+ {
+ if ((pbox_n->x1 >= pbox_n->x2) ||
+ (pbox_n->y1 >= pbox_n->y2))
+ {
+ return FALSE;
+ }
+
+ if (pbox_n->x1 < box.x1)
+ box.x1 = pbox_n->x1;
+
+ if (pbox_n->x2 > box.x2)
+ box.x2 = pbox_n->x2;
+
+ if ((pbox_n->y1 < pbox_p->y1) ||
+ ((pbox_n->y1 == pbox_p->y1) &&
+ ((pbox_n->x1 < pbox_p->x2) || (pbox_n->y2 != pbox_p->y2))))
+ {
+ return FALSE;
+ }
+ }
+
+ return ((box.x1 == reg->extents.x1) &&
+ (box.x2 == reg->extents.x2) &&
+ (box.y1 == reg->extents.y1) &&
+ (box.y2 == reg->extents.y2));
+ }
+}
+
+PIXMAN_EXPORT pixman_bool_t
+PREFIX (_init_rects) (region_type_t *region,
+ const box_type_t *boxes, int count)
+{
+ box_type_t *rects;
+ int displacement;
+ int i;
+
+ /* if it's 1, then we just want to set the extents, so call
+ * the existing method. */
+ if (count == 1)
+ {
+ PREFIX (_init_rect) (region,
+ boxes[0].x1,
+ boxes[0].y1,
+ boxes[0].x2 - boxes[0].x1,
+ boxes[0].y2 - boxes[0].y1);
+ return TRUE;
+ }
+
+ PREFIX (_init) (region);
+
+ /* if it's 0, don't call pixman_rect_alloc -- 0 rectangles is
+ * a special case, and causing pixman_rect_alloc would cause
+ * us to leak memory (because the 0-rect case should be the
+ * static pixman_region_empty_data data).
+ */
+ if (count == 0)
+ return TRUE;
+
+ if (!pixman_rect_alloc (region, count))
+ return FALSE;
+
+ rects = PIXREGION_RECTS (region);
+
+ /* Copy in the rects */
+ memcpy (rects, boxes, sizeof(box_type_t) * count);
+ region->data->numRects = count;
+
+ /* Eliminate empty and malformed rectangles */
+ displacement = 0;
+
+ for (i = 0; i < count; ++i)
+ {
+ box_type_t *box = &rects[i];
+
+ if (box->x1 >= box->x2 || box->y1 >= box->y2)
+ displacement++;
+ else if (displacement)
+ rects[i - displacement] = rects[i];
+ }
+
+ region->data->numRects -= displacement;
+
+ /* If eliminating empty rectangles caused there
+ * to be only 0 or 1 rectangles, deal with that.
+ */
+ if (region->data->numRects == 0)
+ {
+ FREE_DATA (region);
+ PREFIX (_init) (region);
+
+ return TRUE;
+ }
+
+ if (region->data->numRects == 1)
+ {
+ region->extents = rects[0];
+
+ FREE_DATA (region);
+ region->data = NULL;
+
+ GOOD (region);
+
+ return TRUE;
+ }
+
+ /* Validate */
+ region->extents.x1 = region->extents.x2 = 0;
+
+ return validate (region, &i);
+}
+
+#define READ(_ptr) (*(_ptr))
+
+static inline box_type_t *
+bitmap_addrect (region_type_t *reg,
+ box_type_t *r,
+ box_type_t **first_rect,
+ int rx1, int ry1,
+ int rx2, int ry2)
+{
+ if ((rx1 < rx2) && (ry1 < ry2) &&
+ (!(reg->data->numRects &&
+ ((r-1)->y1 == ry1) && ((r-1)->y2 == ry2) &&
+ ((r-1)->x1 <= rx1) && ((r-1)->x2 >= rx2))))
+ {
+ if (!reg->data ||
+ reg->data->numRects == reg->data->size)
+ {
+ if (!pixman_rect_alloc (reg, 1))
+ return NULL;
+ *first_rect = PIXREGION_BOXPTR(reg);
+ r = *first_rect + reg->data->numRects;
+ }
+ r->x1 = rx1;
+ r->y1 = ry1;
+ r->x2 = rx2;
+ r->y2 = ry2;
+ reg->data->numRects++;
+ if (r->x1 < reg->extents.x1)
+ reg->extents.x1 = r->x1;
+ if (r->x2 > reg->extents.x2)
+ reg->extents.x2 = r->x2;
+ r++;
+ }
+ return r;
+}
+
+/* Convert bitmap clip mask into clipping region.
+ * First, goes through each line and makes boxes by noting the transitions
+ * from 0 to 1 and 1 to 0.
+ * Then it coalesces the current line with the previous if they have boxes
+ * at the same X coordinates.
+ * Stride is in number of uint32_t per line.
+ */
+PIXMAN_EXPORT void
+PREFIX (_init_from_image) (region_type_t *region,
+ pixman_image_t *image)
+{
+ uint32_t mask0 = 0xffffffff & ~SCREEN_SHIFT_RIGHT(0xffffffff, 1);
+ box_type_t *first_rect, *rects, *prect_line_start;
+ box_type_t *old_rect, *new_rect;
+ uint32_t *pw, w, *pw_line, *pw_line_end;
+ int irect_prev_start, irect_line_start;
+ int h, base, rx1 = 0, crects;
+ int ib;
+ pixman_bool_t in_box, same;
+ int width, height, stride;
+
+ PREFIX(_init) (region);
+
+ return_if_fail (image->type == BITS);
+ return_if_fail (image->bits.format == PIXMAN_a1);
+
+ pw_line = pixman_image_get_data (image);
+ width = pixman_image_get_width (image);
+ height = pixman_image_get_height (image);
+ stride = pixman_image_get_stride (image) / 4;
+
+ first_rect = PIXREGION_BOXPTR(region);
+ rects = first_rect;
+
+ region->extents.x1 = width - 1;
+ region->extents.x2 = 0;
+ irect_prev_start = -1;
+ for (h = 0; h < height; h++)
+ {
+ pw = pw_line;
+ pw_line += stride;
+ irect_line_start = rects - first_rect;
+
+ /* If the Screen left most bit of the word is set, we're starting in
+ * a box */
+ if (READ(pw) & mask0)
+ {
+ in_box = TRUE;
+ rx1 = 0;
+ }
+ else
+ {
+ in_box = FALSE;
+ }
+
+ /* Process all words which are fully in the pixmap */
+ pw_line_end = pw + (width >> 5);
+ for (base = 0; pw < pw_line_end; base += 32)
+ {
+ w = READ(pw++);
+ if (in_box)
+ {
+ if (!~w)
+ continue;
+ }
+ else
+ {
+ if (!w)
+ continue;
+ }
+ for (ib = 0; ib < 32; ib++)
+ {
+ /* If the Screen left most bit of the word is set, we're
+ * starting a box */
+ if (w & mask0)
+ {
+ if (!in_box)
+ {
+ rx1 = base + ib;
+ /* start new box */
+ in_box = TRUE;
+ }
+ }
+ else
+ {
+ if (in_box)
+ {
+ /* end box */
+ rects = bitmap_addrect (region, rects, &first_rect,
+ rx1, h, base + ib, h + 1);
+ if (rects == NULL)
+ goto error;
+ in_box = FALSE;
+ }
+ }
+ /* Shift the word VISUALLY left one. */
+ w = SCREEN_SHIFT_LEFT(w, 1);
+ }
+ }
+
+ if (width & 31)
+ {
+ /* Process final partial word on line */
+ w = READ(pw++);
+ for (ib = 0; ib < (width & 31); ib++)
+ {
+ /* If the Screen left most bit of the word is set, we're
+ * starting a box */
+ if (w & mask0)
+ {
+ if (!in_box)
+ {
+ rx1 = base + ib;
+ /* start new box */
+ in_box = TRUE;
+ }
+ }
+ else
+ {
+ if (in_box)
+ {
+ /* end box */
+ rects = bitmap_addrect(region, rects, &first_rect,
+ rx1, h, base + ib, h + 1);
+ if (rects == NULL)
+ goto error;
+ in_box = FALSE;
+ }
+ }
+ /* Shift the word VISUALLY left one. */
+ w = SCREEN_SHIFT_LEFT(w, 1);
+ }
+ }
+ /* If scanline ended with last bit set, end the box */
+ if (in_box)
+ {
+ rects = bitmap_addrect(region, rects, &first_rect,
+ rx1, h, base + (width & 31), h + 1);
+ if (rects == NULL)
+ goto error;
+ }
+ /* if all rectangles on this line have the same x-coords as
+ * those on the previous line, then add 1 to all the previous y2s and
+ * throw away all the rectangles from this line
+ */
+ same = FALSE;
+ if (irect_prev_start != -1)
+ {
+ crects = irect_line_start - irect_prev_start;
+ if (crects != 0 &&
+ crects == ((rects - first_rect) - irect_line_start))
+ {
+ old_rect = first_rect + irect_prev_start;
+ new_rect = prect_line_start = first_rect + irect_line_start;
+ same = TRUE;
+ while (old_rect < prect_line_start)
+ {
+ if ((old_rect->x1 != new_rect->x1) ||
+ (old_rect->x2 != new_rect->x2))
+ {
+ same = FALSE;
+ break;
+ }
+ old_rect++;
+ new_rect++;
+ }
+ if (same)
+ {
+ old_rect = first_rect + irect_prev_start;
+ while (old_rect < prect_line_start)
+ {
+ old_rect->y2 += 1;
+ old_rect++;
+ }
+ rects -= crects;
+ region->data->numRects -= crects;
+ }
+ }
+ }
+ if(!same)
+ irect_prev_start = irect_line_start;
+ }
+ if (!region->data->numRects)
+ {
+ region->extents.x1 = region->extents.x2 = 0;
+ }
+ else
+ {
+ region->extents.y1 = PIXREGION_BOXPTR(region)->y1;
+ region->extents.y2 = PIXREGION_END(region)->y2;
+ if (region->data->numRects == 1)
+ {
+ free (region->data);
+ region->data = NULL;
+ }
+ }
+
+ error:
+ return;
+}
diff --git a/pixman/pixman/pixman-solid-fill.c b/pixman/pixman/pixman-solid-fill.c index 48c999a0e..89dcfe3b6 100644 --- a/pixman/pixman/pixman-solid-fill.c +++ b/pixman/pixman/pixman-solid-fill.c @@ -1,120 +1,118 @@ -/* - * Copyright © 2000 SuSE, Inc. - * Copyright © 2007, 2009 Red Hat, Inc. - * Copyright © 2009 Soren Sandmann - * - * Permission to use, copy, modify, distribute, and sell this software and its - * documentation for any purpose is hereby granted without fee, provided that - * the above copyright notice appear in all copies and that both that - * copyright notice and this permission notice appear in supporting - * documentation, and that the name of SuSE not be used in advertising or - * publicity pertaining to distribution of the software without specific, - * written prior permission. SuSE makes no representations about the - * suitability of this software for any purpose. It is provided "as is" - * without express or implied warranty. - * - * SuSE DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE, INCLUDING ALL - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO EVENT SHALL SuSE - * BE LIABLE FOR ANY SPECIAL, INDIRECT OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES - * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION - * OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN - * CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. - */ - -#ifdef HAVE_CONFIG_H -#include <config.h> -#endif -#include "pixman-private.h" - -static void -solid_fill_get_scanline_32 (pixman_image_t *image, - int x, - int y, - int width, - uint32_t * buffer, - const uint32_t *mask, - uint32_t mask_bits) -{ - uint32_t *end = buffer + width; - uint32_t color = image->solid.color_32; - - while (buffer < end) - *(buffer++) = color; - - return; -} - -static void -solid_fill_get_scanline_64 (pixman_image_t *image, - int x, - int y, - int width, - uint32_t * buffer, - const uint32_t *mask, - uint32_t mask_bits) -{ - uint64_t *b = (uint64_t *)buffer; - uint64_t *e = b + width; - uint64_t color = image->solid.color_64; - - while (b < e) - *(b++) = color; -} - -static source_image_class_t -solid_fill_classify (pixman_image_t *image, - int x, - int y, - int width, - int height) -{ - return (image->source.class = SOURCE_IMAGE_CLASS_HORIZONTAL); -} - -static void -solid_fill_property_changed (pixman_image_t *image) -{ - image->common.get_scanline_32 = solid_fill_get_scanline_32; - image->common.get_scanline_64 = solid_fill_get_scanline_64; -} - -static uint32_t -color_to_uint32 (const pixman_color_t *color) -{ - return - (color->alpha >> 8 << 24) | - (color->red >> 8 << 16) | - (color->green & 0xff00) | - (color->blue >> 8); -} - -static uint64_t -color_to_uint64 (const pixman_color_t *color) -{ - return - ((uint64_t)color->alpha << 48) | - ((uint64_t)color->red << 32) | - ((uint64_t)color->green << 16) | - ((uint64_t)color->blue); -} - -PIXMAN_EXPORT pixman_image_t * -pixman_image_create_solid_fill (pixman_color_t *color) -{ - pixman_image_t *img = _pixman_image_allocate (); - - if (!img) - return NULL; - - img->type = SOLID; - img->solid.color = *color; - img->solid.color_32 = color_to_uint32 (color); - img->solid.color_64 = color_to_uint64 (color); - - img->source.class = SOURCE_IMAGE_CLASS_UNKNOWN; - img->common.classify = solid_fill_classify; - img->common.property_changed = solid_fill_property_changed; - - return img; -} - +/*
+ * Copyright © 2000 SuSE, Inc.
+ * Copyright © 2007, 2009 Red Hat, Inc.
+ * Copyright © 2009 Soren Sandmann
+ *
+ * Permission to use, copy, modify, distribute, and sell this software and its
+ * documentation for any purpose is hereby granted without fee, provided that
+ * the above copyright notice appear in all copies and that both that
+ * copyright notice and this permission notice appear in supporting
+ * documentation, and that the name of SuSE not be used in advertising or
+ * publicity pertaining to distribution of the software without specific,
+ * written prior permission. SuSE makes no representations about the
+ * suitability of this software for any purpose. It is provided "as is"
+ * without express or implied warranty.
+ *
+ * SuSE DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE, INCLUDING ALL
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO EVENT SHALL SuSE
+ * BE LIABLE FOR ANY SPECIAL, INDIRECT OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION
+ * OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN
+ * CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+
+#ifdef HAVE_CONFIG_H
+#include <config.h>
+#endif
+#include "pixman-private.h"
+
+static void
+solid_fill_get_scanline_32 (pixman_image_t *image,
+ int x,
+ int y,
+ int width,
+ uint32_t * buffer,
+ const uint32_t *mask)
+{
+ uint32_t *end = buffer + width;
+ uint32_t color = image->solid.color_32;
+
+ while (buffer < end)
+ *(buffer++) = color;
+
+ return;
+}
+
+static void
+solid_fill_get_scanline_64 (pixman_image_t *image,
+ int x,
+ int y,
+ int width,
+ uint32_t * buffer,
+ const uint32_t *mask)
+{
+ uint64_t *b = (uint64_t *)buffer;
+ uint64_t *e = b + width;
+ uint64_t color = image->solid.color_64;
+
+ while (b < e)
+ *(b++) = color;
+}
+
+static source_image_class_t
+solid_fill_classify (pixman_image_t *image,
+ int x,
+ int y,
+ int width,
+ int height)
+{
+ return (image->source.class = SOURCE_IMAGE_CLASS_HORIZONTAL);
+}
+
+static void
+solid_fill_property_changed (pixman_image_t *image)
+{
+ image->common.get_scanline_32 = solid_fill_get_scanline_32;
+ image->common.get_scanline_64 = solid_fill_get_scanline_64;
+}
+
+static uint32_t
+color_to_uint32 (const pixman_color_t *color)
+{
+ return
+ (color->alpha >> 8 << 24) |
+ (color->red >> 8 << 16) |
+ (color->green & 0xff00) |
+ (color->blue >> 8);
+}
+
+static uint64_t
+color_to_uint64 (const pixman_color_t *color)
+{
+ return
+ ((uint64_t)color->alpha << 48) |
+ ((uint64_t)color->red << 32) |
+ ((uint64_t)color->green << 16) |
+ ((uint64_t)color->blue);
+}
+
+PIXMAN_EXPORT pixman_image_t *
+pixman_image_create_solid_fill (pixman_color_t *color)
+{
+ pixman_image_t *img = _pixman_image_allocate ();
+
+ if (!img)
+ return NULL;
+
+ img->type = SOLID;
+ img->solid.color = *color;
+ img->solid.color_32 = color_to_uint32 (color);
+ img->solid.color_64 = color_to_uint64 (color);
+
+ img->source.class = SOURCE_IMAGE_CLASS_UNKNOWN;
+ img->common.classify = solid_fill_classify;
+ img->common.property_changed = solid_fill_property_changed;
+
+ return img;
+}
+
diff --git a/pixman/pixman/pixman-sse2.c b/pixman/pixman/pixman-sse2.c index 946e7ba37..cfef466c8 100644 --- a/pixman/pixman/pixman-sse2.c +++ b/pixman/pixman/pixman-sse2.c @@ -1,5972 +1,6562 @@ -/* - * Copyright © 2008 Rodrigo Kumpera - * Copyright © 2008 André Tupinambá - * - * Permission to use, copy, modify, distribute, and sell this software and its - * documentation for any purpose is hereby granted without fee, provided that - * the above copyright notice appear in all copies and that both that - * copyright notice and this permission notice appear in supporting - * documentation, and that the name of Red Hat not be used in advertising or - * publicity pertaining to distribution of the software without specific, - * written prior permission. Red Hat makes no representations about the - * suitability of this software for any purpose. It is provided "as is" - * without express or implied warranty. - * - * THE COPYRIGHT HOLDERS DISCLAIM ALL WARRANTIES WITH REGARD TO THIS - * SOFTWARE, INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND - * FITNESS, IN NO EVENT SHALL THE COPYRIGHT HOLDERS BE LIABLE FOR ANY - * SPECIAL, INDIRECT OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES - * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN - * AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING - * OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS - * SOFTWARE. - * - * Author: Rodrigo Kumpera (kumpera@gmail.com) - * André Tupinambá (andrelrt@gmail.com) - * - * Based on work by Owen Taylor and Søren Sandmann - */ -#ifdef HAVE_CONFIG_H -#include <config.h> -#endif - -#include <mmintrin.h> -#include <xmmintrin.h> /* for _mm_shuffle_pi16 and _MM_SHUFFLE */ -#include <emmintrin.h> /* for SSE2 intrinsics */ -#include "pixman-private.h" -#include "pixman-combine32.h" - -#if defined(_MSC_VER) && defined(_M_AMD64) -/* Windows 64 doesn't allow MMX to be used, so - * the pixman-x64-mmx-emulation.h file contains - * implementations of those MMX intrinsics that - * are used in the SSE2 implementation. - */ -# include "pixman-x64-mmx-emulation.h" -#endif - -#ifdef USE_SSE2 - -/* -------------------------------------------------------------------- - * Locals - */ - -static __m64 mask_x0080; -static __m64 mask_x00ff; -static __m64 mask_x0101; -static __m64 mask_x_alpha; - -static __m64 mask_x565_rgb; -static __m64 mask_x565_unpack; - -static __m128i mask_0080; -static __m128i mask_00ff; -static __m128i mask_0101; -static __m128i mask_ffff; -static __m128i mask_ff000000; -static __m128i mask_alpha; - -static __m128i mask_565_r; -static __m128i mask_565_g1, mask_565_g2; -static __m128i mask_565_b; -static __m128i mask_red; -static __m128i mask_green; -static __m128i mask_blue; - -static __m128i mask_565_fix_rb; -static __m128i mask_565_fix_g; - -/* ---------------------------------------------------------------------- - * SSE2 Inlines - */ -static force_inline __m128i -unpack_32_1x128 (uint32_t data) -{ - return _mm_unpacklo_epi8 (_mm_cvtsi32_si128 (data), _mm_setzero_si128 ()); -} - -static force_inline void -unpack_128_2x128 (__m128i data, __m128i* data_lo, __m128i* data_hi) -{ - *data_lo = _mm_unpacklo_epi8 (data, _mm_setzero_si128 ()); - *data_hi = _mm_unpackhi_epi8 (data, _mm_setzero_si128 ()); -} - -static force_inline __m128i -unpack_565_to_8888 (__m128i lo) -{ - __m128i r, g, b, rb, t; - - r = _mm_and_si128 (_mm_slli_epi32 (lo, 8), mask_red); - g = _mm_and_si128 (_mm_slli_epi32 (lo, 5), mask_green); - b = _mm_and_si128 (_mm_slli_epi32 (lo, 3), mask_blue); - - rb = _mm_or_si128 (r, b); - t = _mm_and_si128 (rb, mask_565_fix_rb); - t = _mm_srli_epi32 (t, 5); - rb = _mm_or_si128 (rb, t); - - t = _mm_and_si128 (g, mask_565_fix_g); - t = _mm_srli_epi32 (t, 6); - g = _mm_or_si128 (g, t); - - return _mm_or_si128 (rb, g); -} - -static force_inline void -unpack_565_128_4x128 (__m128i data, - __m128i* data0, - __m128i* data1, - __m128i* data2, - __m128i* data3) -{ - __m128i lo, hi; - - lo = _mm_unpacklo_epi16 (data, _mm_setzero_si128 ()); - hi = _mm_unpackhi_epi16 (data, _mm_setzero_si128 ()); - - lo = unpack_565_to_8888 (lo); - hi = unpack_565_to_8888 (hi); - - unpack_128_2x128 (lo, data0, data1); - unpack_128_2x128 (hi, data2, data3); -} - -static force_inline uint16_t -pack_565_32_16 (uint32_t pixel) -{ - return (uint16_t) (((pixel >> 8) & 0xf800) | - ((pixel >> 5) & 0x07e0) | - ((pixel >> 3) & 0x001f)); -} - -static force_inline __m128i -pack_2x128_128 (__m128i lo, __m128i hi) -{ - return _mm_packus_epi16 (lo, hi); -} - -static force_inline __m128i -pack_565_2x128_128 (__m128i lo, __m128i hi) -{ - __m128i data; - __m128i r, g1, g2, b; - - data = pack_2x128_128 (lo, hi); - - r = _mm_and_si128 (data, mask_565_r); - g1 = _mm_and_si128 (_mm_slli_epi32 (data, 3), mask_565_g1); - g2 = _mm_and_si128 (_mm_srli_epi32 (data, 5), mask_565_g2); - b = _mm_and_si128 (_mm_srli_epi32 (data, 3), mask_565_b); - - return _mm_or_si128 (_mm_or_si128 (_mm_or_si128 (r, g1), g2), b); -} - -static force_inline __m128i -pack_565_4x128_128 (__m128i* xmm0, __m128i* xmm1, __m128i* xmm2, __m128i* xmm3) -{ - return _mm_packus_epi16 (pack_565_2x128_128 (*xmm0, *xmm1), - pack_565_2x128_128 (*xmm2, *xmm3)); -} - -static force_inline int -is_opaque (__m128i x) -{ - __m128i ffs = _mm_cmpeq_epi8 (x, x); - - return (_mm_movemask_epi8 (_mm_cmpeq_epi8 (x, ffs)) & 0x8888) == 0x8888; -} - -static force_inline int -is_zero (__m128i x) -{ - return _mm_movemask_epi8 ( - _mm_cmpeq_epi8 (x, _mm_setzero_si128 ())) == 0xffff; -} - -static force_inline int -is_transparent (__m128i x) -{ - return (_mm_movemask_epi8 ( - _mm_cmpeq_epi8 (x, _mm_setzero_si128 ())) & 0x8888) == 0x8888; -} - -static force_inline __m128i -expand_pixel_32_1x128 (uint32_t data) -{ - return _mm_shuffle_epi32 (unpack_32_1x128 (data), _MM_SHUFFLE (1, 0, 1, 0)); -} - -static force_inline __m128i -expand_alpha_1x128 (__m128i data) -{ - return _mm_shufflehi_epi16 (_mm_shufflelo_epi16 (data, - _MM_SHUFFLE (3, 3, 3, 3)), - _MM_SHUFFLE (3, 3, 3, 3)); -} - -static force_inline void -expand_alpha_2x128 (__m128i data_lo, - __m128i data_hi, - __m128i* alpha_lo, - __m128i* alpha_hi) -{ - __m128i lo, hi; - - lo = _mm_shufflelo_epi16 (data_lo, _MM_SHUFFLE (3, 3, 3, 3)); - hi = _mm_shufflelo_epi16 (data_hi, _MM_SHUFFLE (3, 3, 3, 3)); - - *alpha_lo = _mm_shufflehi_epi16 (lo, _MM_SHUFFLE (3, 3, 3, 3)); - *alpha_hi = _mm_shufflehi_epi16 (hi, _MM_SHUFFLE (3, 3, 3, 3)); -} - -static force_inline void -expand_alpha_rev_2x128 (__m128i data_lo, - __m128i data_hi, - __m128i* alpha_lo, - __m128i* alpha_hi) -{ - __m128i lo, hi; - - lo = _mm_shufflelo_epi16 (data_lo, _MM_SHUFFLE (0, 0, 0, 0)); - hi = _mm_shufflelo_epi16 (data_hi, _MM_SHUFFLE (0, 0, 0, 0)); - *alpha_lo = _mm_shufflehi_epi16 (lo, _MM_SHUFFLE (0, 0, 0, 0)); - *alpha_hi = _mm_shufflehi_epi16 (hi, _MM_SHUFFLE (0, 0, 0, 0)); -} - -static force_inline void -pix_multiply_2x128 (__m128i* data_lo, - __m128i* data_hi, - __m128i* alpha_lo, - __m128i* alpha_hi, - __m128i* ret_lo, - __m128i* ret_hi) -{ - __m128i lo, hi; - - lo = _mm_mullo_epi16 (*data_lo, *alpha_lo); - hi = _mm_mullo_epi16 (*data_hi, *alpha_hi); - lo = _mm_adds_epu16 (lo, mask_0080); - hi = _mm_adds_epu16 (hi, mask_0080); - *ret_lo = _mm_mulhi_epu16 (lo, mask_0101); - *ret_hi = _mm_mulhi_epu16 (hi, mask_0101); -} - -static force_inline void -pix_add_multiply_2x128 (__m128i* src_lo, - __m128i* src_hi, - __m128i* alpha_dst_lo, - __m128i* alpha_dst_hi, - __m128i* dst_lo, - __m128i* dst_hi, - __m128i* alpha_src_lo, - __m128i* alpha_src_hi, - __m128i* ret_lo, - __m128i* ret_hi) -{ - __m128i t1_lo, t1_hi; - __m128i t2_lo, t2_hi; - - pix_multiply_2x128 (src_lo, src_hi, alpha_dst_lo, alpha_dst_hi, &t1_lo, &t1_hi); - pix_multiply_2x128 (dst_lo, dst_hi, alpha_src_lo, alpha_src_hi, &t2_lo, &t2_hi); - - *ret_lo = _mm_adds_epu8 (t1_lo, t2_lo); - *ret_hi = _mm_adds_epu8 (t1_hi, t2_hi); -} - -static force_inline void -negate_2x128 (__m128i data_lo, - __m128i data_hi, - __m128i* neg_lo, - __m128i* neg_hi) -{ - *neg_lo = _mm_xor_si128 (data_lo, mask_00ff); - *neg_hi = _mm_xor_si128 (data_hi, mask_00ff); -} - -static force_inline void -invert_colors_2x128 (__m128i data_lo, - __m128i data_hi, - __m128i* inv_lo, - __m128i* inv_hi) -{ - __m128i lo, hi; - - lo = _mm_shufflelo_epi16 (data_lo, _MM_SHUFFLE (3, 0, 1, 2)); - hi = _mm_shufflelo_epi16 (data_hi, _MM_SHUFFLE (3, 0, 1, 2)); - *inv_lo = _mm_shufflehi_epi16 (lo, _MM_SHUFFLE (3, 0, 1, 2)); - *inv_hi = _mm_shufflehi_epi16 (hi, _MM_SHUFFLE (3, 0, 1, 2)); -} - -static force_inline void -over_2x128 (__m128i* src_lo, - __m128i* src_hi, - __m128i* alpha_lo, - __m128i* alpha_hi, - __m128i* dst_lo, - __m128i* dst_hi) -{ - __m128i t1, t2; - - negate_2x128 (*alpha_lo, *alpha_hi, &t1, &t2); - - pix_multiply_2x128 (dst_lo, dst_hi, &t1, &t2, dst_lo, dst_hi); - - *dst_lo = _mm_adds_epu8 (*src_lo, *dst_lo); - *dst_hi = _mm_adds_epu8 (*src_hi, *dst_hi); -} - -static force_inline void -over_rev_non_pre_2x128 (__m128i src_lo, - __m128i src_hi, - __m128i* dst_lo, - __m128i* dst_hi) -{ - __m128i lo, hi; - __m128i alpha_lo, alpha_hi; - - expand_alpha_2x128 (src_lo, src_hi, &alpha_lo, &alpha_hi); - - lo = _mm_or_si128 (alpha_lo, mask_alpha); - hi = _mm_or_si128 (alpha_hi, mask_alpha); - - invert_colors_2x128 (src_lo, src_hi, &src_lo, &src_hi); - - pix_multiply_2x128 (&src_lo, &src_hi, &lo, &hi, &lo, &hi); - - over_2x128 (&lo, &hi, &alpha_lo, &alpha_hi, dst_lo, dst_hi); -} - -static force_inline void -in_over_2x128 (__m128i* src_lo, - __m128i* src_hi, - __m128i* alpha_lo, - __m128i* alpha_hi, - __m128i* mask_lo, - __m128i* mask_hi, - __m128i* dst_lo, - __m128i* dst_hi) -{ - __m128i s_lo, s_hi; - __m128i a_lo, a_hi; - - pix_multiply_2x128 (src_lo, src_hi, mask_lo, mask_hi, &s_lo, &s_hi); - pix_multiply_2x128 (alpha_lo, alpha_hi, mask_lo, mask_hi, &a_lo, &a_hi); - - over_2x128 (&s_lo, &s_hi, &a_lo, &a_hi, dst_lo, dst_hi); -} - -static force_inline void -cache_prefetch (__m128i* addr) -{ - _mm_prefetch ((void const*)addr, _MM_HINT_T0); -} - -static force_inline void -cache_prefetch_next (__m128i* addr) -{ - _mm_prefetch ((void const *)(addr + 4), _MM_HINT_T0); /* 64 bytes ahead */ -} - -/* prefetching NULL is very slow on some systems. don't do that. */ - -static force_inline void -maybe_prefetch (__m128i* addr) -{ - if (addr) - cache_prefetch (addr); -} - -static force_inline void -maybe_prefetch_next (__m128i* addr) -{ - if (addr) - cache_prefetch_next (addr); -} - -/* load 4 pixels from a 16-byte boundary aligned address */ -static force_inline __m128i -load_128_aligned (__m128i* src) -{ - return _mm_load_si128 (src); -} - -/* load 4 pixels from a unaligned address */ -static force_inline __m128i -load_128_unaligned (const __m128i* src) -{ - return _mm_loadu_si128 (src); -} - -/* save 4 pixels using Write Combining memory on a 16-byte - * boundary aligned address - */ -static force_inline void -save_128_write_combining (__m128i* dst, - __m128i data) -{ - _mm_stream_si128 (dst, data); -} - -/* save 4 pixels on a 16-byte boundary aligned address */ -static force_inline void -save_128_aligned (__m128i* dst, - __m128i data) -{ - _mm_store_si128 (dst, data); -} - -/* save 4 pixels on a unaligned address */ -static force_inline void -save_128_unaligned (__m128i* dst, - __m128i data) -{ - _mm_storeu_si128 (dst, data); -} - -/* ------------------------------------------------------------------ - * MMX inlines - */ - -static force_inline __m64 -load_32_1x64 (uint32_t data) -{ - return _mm_cvtsi32_si64 (data); -} - -static force_inline __m64 -unpack_32_1x64 (uint32_t data) -{ - return _mm_unpacklo_pi8 (load_32_1x64 (data), _mm_setzero_si64 ()); -} - -static force_inline __m64 -expand_alpha_1x64 (__m64 data) -{ - return _mm_shuffle_pi16 (data, _MM_SHUFFLE (3, 3, 3, 3)); -} - -static force_inline __m64 -expand_alpha_rev_1x64 (__m64 data) -{ - return _mm_shuffle_pi16 (data, _MM_SHUFFLE (0, 0, 0, 0)); -} - -static force_inline __m64 -expand_pixel_8_1x64 (uint8_t data) -{ - return _mm_shuffle_pi16 ( - unpack_32_1x64 ((uint32_t)data), _MM_SHUFFLE (0, 0, 0, 0)); -} - -static force_inline __m64 -pix_multiply_1x64 (__m64 data, - __m64 alpha) -{ - return _mm_mulhi_pu16 (_mm_adds_pu16 (_mm_mullo_pi16 (data, alpha), - mask_x0080), - mask_x0101); -} - -static force_inline __m64 -pix_add_multiply_1x64 (__m64* src, - __m64* alpha_dst, - __m64* dst, - __m64* alpha_src) -{ - __m64 t1 = pix_multiply_1x64 (*src, *alpha_dst); - __m64 t2 = pix_multiply_1x64 (*dst, *alpha_src); - - return _mm_adds_pu8 (t1, t2); -} - -static force_inline __m64 -negate_1x64 (__m64 data) -{ - return _mm_xor_si64 (data, mask_x00ff); -} - -static force_inline __m64 -invert_colors_1x64 (__m64 data) -{ - return _mm_shuffle_pi16 (data, _MM_SHUFFLE (3, 0, 1, 2)); -} - -static force_inline __m64 -over_1x64 (__m64 src, __m64 alpha, __m64 dst) -{ - return _mm_adds_pu8 (src, pix_multiply_1x64 (dst, negate_1x64 (alpha))); -} - -static force_inline __m64 -in_over_1x64 (__m64* src, __m64* alpha, __m64* mask, __m64* dst) -{ - return over_1x64 (pix_multiply_1x64 (*src, *mask), - pix_multiply_1x64 (*alpha, *mask), - *dst); -} - -static force_inline __m64 -over_rev_non_pre_1x64 (__m64 src, __m64 dst) -{ - __m64 alpha = expand_alpha_1x64 (src); - - return over_1x64 (pix_multiply_1x64 (invert_colors_1x64 (src), - _mm_or_si64 (alpha, mask_x_alpha)), - alpha, - dst); -} - -static force_inline uint32_t -pack_1x64_32 (__m64 data) -{ - return _mm_cvtsi64_si32 (_mm_packs_pu16 (data, _mm_setzero_si64 ())); -} - -/* Expand 16 bits positioned at @pos (0-3) of a mmx register into - * - * 00RR00GG00BB - * - * --- Expanding 565 in the low word --- - * - * m = (m << (32 - 3)) | (m << (16 - 5)) | m; - * m = m & (01f0003f001f); - * m = m * (008404100840); - * m = m >> 8; - * - * Note the trick here - the top word is shifted by another nibble to - * avoid it bumping into the middle word - */ -static force_inline __m64 -expand565_16_1x64 (uint16_t pixel) -{ - __m64 p; - __m64 t1, t2; - - p = _mm_cvtsi32_si64 ((uint32_t) pixel); - - t1 = _mm_slli_si64 (p, 36 - 11); - t2 = _mm_slli_si64 (p, 16 - 5); - - p = _mm_or_si64 (t1, p); - p = _mm_or_si64 (t2, p); - p = _mm_and_si64 (p, mask_x565_rgb); - p = _mm_mullo_pi16 (p, mask_x565_unpack); - - return _mm_srli_pi16 (p, 8); -} - -/* ---------------------------------------------------------------------------- - * Compose Core transformations - */ -static force_inline uint32_t -core_combine_over_u_pixel_sse2 (uint32_t src, uint32_t dst) -{ - uint8_t a; - __m64 ms; - - a = src >> 24; - - if (a == 0xff) - { - return src; - } - else if (src) - { - ms = unpack_32_1x64 (src); - return pack_1x64_32 ( - over_1x64 (ms, expand_alpha_1x64 (ms), unpack_32_1x64 (dst))); - } - - return dst; -} - -static force_inline uint32_t -combine1 (const uint32_t *ps, const uint32_t *pm) -{ - uint32_t s = *ps; - - if (pm) - { - __m64 ms, mm; - - mm = unpack_32_1x64 (*pm); - mm = expand_alpha_1x64 (mm); - - ms = unpack_32_1x64 (s); - ms = pix_multiply_1x64 (ms, mm); - - s = pack_1x64_32 (ms); - } - - return s; -} - -static force_inline __m128i -combine4 (const __m128i *ps, const __m128i *pm) -{ - __m128i xmm_src_lo, xmm_src_hi; - __m128i xmm_msk_lo, xmm_msk_hi; - __m128i s; - - if (pm) - { - xmm_msk_lo = load_128_unaligned (pm); - - if (is_transparent (xmm_msk_lo)) - return _mm_setzero_si128 (); - } - - s = load_128_unaligned (ps); - - if (pm) - { - unpack_128_2x128 (s, &xmm_src_lo, &xmm_src_hi); - unpack_128_2x128 (xmm_msk_lo, &xmm_msk_lo, &xmm_msk_hi); - - expand_alpha_2x128 (xmm_msk_lo, xmm_msk_hi, &xmm_msk_lo, &xmm_msk_hi); - - pix_multiply_2x128 (&xmm_src_lo, &xmm_src_hi, - &xmm_msk_lo, &xmm_msk_hi, - &xmm_src_lo, &xmm_src_hi); - - s = pack_2x128_128 (xmm_src_lo, xmm_src_hi); - } - - return s; -} - -static force_inline void -core_combine_over_u_sse2 (uint32_t* pd, - const uint32_t* ps, - const uint32_t* pm, - int w) -{ - uint32_t s, d; - - __m128i xmm_dst_lo, xmm_dst_hi; - __m128i xmm_src_lo, xmm_src_hi; - __m128i xmm_alpha_lo, xmm_alpha_hi; - - /* call prefetch hint to optimize cache load*/ - cache_prefetch ((__m128i*)ps); - cache_prefetch ((__m128i*)pd); - maybe_prefetch ((__m128i*)pm); - - /* Align dst on a 16-byte boundary */ - while (w && ((unsigned long)pd & 15)) - { - d = *pd; - s = combine1 (ps, pm); - - *pd++ = core_combine_over_u_pixel_sse2 (s, d); - ps++; - if (pm) - pm++; - w--; - } - - /* call prefetch hint to optimize cache load*/ - cache_prefetch ((__m128i*)ps); - cache_prefetch ((__m128i*)pd); - maybe_prefetch ((__m128i*)pm); - - while (w >= 4) - { - /* fill cache line with next memory */ - cache_prefetch_next ((__m128i*)ps); - cache_prefetch_next ((__m128i*)pd); - maybe_prefetch_next ((__m128i*)pm); - - /* I'm loading unaligned because I'm not sure about - * the address alignment. - */ - xmm_src_hi = combine4 ((__m128i*)ps, (__m128i*)pm); - - if (is_opaque (xmm_src_hi)) - { - save_128_aligned ((__m128i*)pd, xmm_src_hi); - } - else if (!is_zero (xmm_src_hi)) - { - xmm_dst_hi = load_128_aligned ((__m128i*) pd); - - unpack_128_2x128 (xmm_src_hi, &xmm_src_lo, &xmm_src_hi); - unpack_128_2x128 (xmm_dst_hi, &xmm_dst_lo, &xmm_dst_hi); - - expand_alpha_2x128 ( - xmm_src_lo, xmm_src_hi, &xmm_alpha_lo, &xmm_alpha_hi); - - over_2x128 (&xmm_src_lo, &xmm_src_hi, - &xmm_alpha_lo, &xmm_alpha_hi, - &xmm_dst_lo, &xmm_dst_hi); - - /* rebuid the 4 pixel data and save*/ - save_128_aligned ((__m128i*)pd, - pack_2x128_128 (xmm_dst_lo, xmm_dst_hi)); - } - - w -= 4; - ps += 4; - pd += 4; - if (pm) - pm += 4; - } - - while (w) - { - d = *pd; - s = combine1 (ps, pm); - - *pd++ = core_combine_over_u_pixel_sse2 (s, d); - ps++; - if (pm) - pm++; - - w--; - } -} - -static force_inline void -core_combine_over_reverse_u_sse2 (uint32_t* pd, - const uint32_t* ps, - const uint32_t* pm, - int w) -{ - uint32_t s, d; - - __m128i xmm_dst_lo, xmm_dst_hi; - __m128i xmm_src_lo, xmm_src_hi; - __m128i xmm_alpha_lo, xmm_alpha_hi; - - /* call prefetch hint to optimize cache load*/ - cache_prefetch ((__m128i*)ps); - cache_prefetch ((__m128i*)pd); - maybe_prefetch ((__m128i*)pm); - - /* Align dst on a 16-byte boundary */ - while (w && - ((unsigned long)pd & 15)) - { - d = *pd; - s = combine1 (ps, pm); - - *pd++ = core_combine_over_u_pixel_sse2 (d, s); - w--; - ps++; - if (pm) - pm++; - } - - /* call prefetch hint to optimize cache load*/ - cache_prefetch ((__m128i*)ps); - cache_prefetch ((__m128i*)pd); - maybe_prefetch ((__m128i*)pm); - - while (w >= 4) - { - /* fill cache line with next memory */ - cache_prefetch_next ((__m128i*)ps); - cache_prefetch_next ((__m128i*)pd); - maybe_prefetch_next ((__m128i*)pm); - - /* I'm loading unaligned because I'm not sure - * about the address alignment. - */ - xmm_src_hi = combine4 ((__m128i*)ps, (__m128i*)pm); - xmm_dst_hi = load_128_aligned ((__m128i*) pd); - - unpack_128_2x128 (xmm_src_hi, &xmm_src_lo, &xmm_src_hi); - unpack_128_2x128 (xmm_dst_hi, &xmm_dst_lo, &xmm_dst_hi); - - expand_alpha_2x128 (xmm_dst_lo, xmm_dst_hi, - &xmm_alpha_lo, &xmm_alpha_hi); - - over_2x128 (&xmm_dst_lo, &xmm_dst_hi, - &xmm_alpha_lo, &xmm_alpha_hi, - &xmm_src_lo, &xmm_src_hi); - - /* rebuid the 4 pixel data and save*/ - save_128_aligned ((__m128i*)pd, - pack_2x128_128 (xmm_src_lo, xmm_src_hi)); - - w -= 4; - ps += 4; - pd += 4; - - if (pm) - pm += 4; - } - - while (w) - { - d = *pd; - s = combine1 (ps, pm); - - *pd++ = core_combine_over_u_pixel_sse2 (d, s); - ps++; - w--; - if (pm) - pm++; - } -} - -static force_inline uint32_t -core_combine_in_u_pixelsse2 (uint32_t src, uint32_t dst) -{ - uint32_t maska = src >> 24; - - if (maska == 0) - { - return 0; - } - else if (maska != 0xff) - { - return pack_1x64_32 ( - pix_multiply_1x64 (unpack_32_1x64 (dst), - expand_alpha_1x64 (unpack_32_1x64 (src)))); - } - - return dst; -} - -static force_inline void -core_combine_in_u_sse2 (uint32_t* pd, - const uint32_t* ps, - const uint32_t* pm, - int w) -{ - uint32_t s, d; - - __m128i xmm_src_lo, xmm_src_hi; - __m128i xmm_dst_lo, xmm_dst_hi; - - /* call prefetch hint to optimize cache load*/ - cache_prefetch ((__m128i*)ps); - cache_prefetch ((__m128i*)pd); - maybe_prefetch ((__m128i*)pm); - - while (w && ((unsigned long) pd & 15)) - { - s = combine1 (ps, pm); - d = *pd; - - *pd++ = core_combine_in_u_pixelsse2 (d, s); - w--; - ps++; - if (pm) - pm++; - } - - /* call prefetch hint to optimize cache load*/ - cache_prefetch ((__m128i*)ps); - cache_prefetch ((__m128i*)pd); - maybe_prefetch ((__m128i*)pm); - - while (w >= 4) - { - /* fill cache line with next memory */ - cache_prefetch_next ((__m128i*)ps); - cache_prefetch_next ((__m128i*)pd); - maybe_prefetch_next ((__m128i*)pm); - - xmm_dst_hi = load_128_aligned ((__m128i*) pd); - xmm_src_hi = combine4 ((__m128i*) ps, (__m128i*) pm); - - unpack_128_2x128 (xmm_dst_hi, &xmm_dst_lo, &xmm_dst_hi); - expand_alpha_2x128 (xmm_dst_lo, xmm_dst_hi, &xmm_dst_lo, &xmm_dst_hi); - - unpack_128_2x128 (xmm_src_hi, &xmm_src_lo, &xmm_src_hi); - pix_multiply_2x128 (&xmm_src_lo, &xmm_src_hi, - &xmm_dst_lo, &xmm_dst_hi, - &xmm_dst_lo, &xmm_dst_hi); - - save_128_aligned ((__m128i*)pd, - pack_2x128_128 (xmm_dst_lo, xmm_dst_hi)); - - ps += 4; - pd += 4; - w -= 4; - if (pm) - pm += 4; - } - - while (w) - { - s = combine1 (ps, pm); - d = *pd; - - *pd++ = core_combine_in_u_pixelsse2 (d, s); - w--; - ps++; - if (pm) - pm++; - } -} - -static force_inline void -core_combine_reverse_in_u_sse2 (uint32_t* pd, - const uint32_t* ps, - const uint32_t *pm, - int w) -{ - uint32_t s, d; - - __m128i xmm_src_lo, xmm_src_hi; - __m128i xmm_dst_lo, xmm_dst_hi; - - /* call prefetch hint to optimize cache load*/ - cache_prefetch ((__m128i*)ps); - cache_prefetch ((__m128i*)pd); - maybe_prefetch ((__m128i*)pm); - - while (w && ((unsigned long) pd & 15)) - { - s = combine1 (ps, pm); - d = *pd; - - *pd++ = core_combine_in_u_pixelsse2 (s, d); - ps++; - w--; - if (pm) - pm++; - } - - /* call prefetch hint to optimize cache load*/ - cache_prefetch ((__m128i*)ps); - cache_prefetch ((__m128i*)pd); - maybe_prefetch ((__m128i*)pm); - - while (w >= 4) - { - /* fill cache line with next memory */ - cache_prefetch_next ((__m128i*)ps); - cache_prefetch_next ((__m128i*)pd); - maybe_prefetch_next ((__m128i*)pm); - - xmm_dst_hi = load_128_aligned ((__m128i*) pd); - xmm_src_hi = combine4 ((__m128i*) ps, (__m128i*)pm); - - unpack_128_2x128 (xmm_src_hi, &xmm_src_lo, &xmm_src_hi); - expand_alpha_2x128 (xmm_src_lo, xmm_src_hi, &xmm_src_lo, &xmm_src_hi); - - unpack_128_2x128 (xmm_dst_hi, &xmm_dst_lo, &xmm_dst_hi); - pix_multiply_2x128 (&xmm_dst_lo, &xmm_dst_hi, - &xmm_src_lo, &xmm_src_hi, - &xmm_dst_lo, &xmm_dst_hi); - - save_128_aligned ( - (__m128i*)pd, pack_2x128_128 (xmm_dst_lo, xmm_dst_hi)); - - ps += 4; - pd += 4; - w -= 4; - if (pm) - pm += 4; - } - - while (w) - { - s = combine1 (ps, pm); - d = *pd; - - *pd++ = core_combine_in_u_pixelsse2 (s, d); - w--; - ps++; - if (pm) - pm++; - } -} - -static force_inline void -core_combine_reverse_out_u_sse2 (uint32_t* pd, - const uint32_t* ps, - const uint32_t* pm, - int w) -{ - /* call prefetch hint to optimize cache load*/ - cache_prefetch ((__m128i*)ps); - cache_prefetch ((__m128i*)pd); - maybe_prefetch ((__m128i*)pm); - - while (w && ((unsigned long) pd & 15)) - { - uint32_t s = combine1 (ps, pm); - uint32_t d = *pd; - - *pd++ = pack_1x64_32 ( - pix_multiply_1x64 ( - unpack_32_1x64 (d), negate_1x64 ( - expand_alpha_1x64 (unpack_32_1x64 (s))))); - - if (pm) - pm++; - ps++; - w--; - } - - /* call prefetch hint to optimize cache load*/ - cache_prefetch ((__m128i*)ps); - cache_prefetch ((__m128i*)pd); - maybe_prefetch ((__m128i*)pm); - - while (w >= 4) - { - __m128i xmm_src_lo, xmm_src_hi; - __m128i xmm_dst_lo, xmm_dst_hi; - - /* fill cache line with next memory */ - cache_prefetch_next ((__m128i*)ps); - cache_prefetch_next ((__m128i*)pd); - maybe_prefetch_next ((__m128i*)pm); - - xmm_src_hi = combine4 ((__m128i*)ps, (__m128i*)pm); - xmm_dst_hi = load_128_aligned ((__m128i*) pd); - - unpack_128_2x128 (xmm_src_hi, &xmm_src_lo, &xmm_src_hi); - unpack_128_2x128 (xmm_dst_hi, &xmm_dst_lo, &xmm_dst_hi); - - expand_alpha_2x128 (xmm_src_lo, xmm_src_hi, &xmm_src_lo, &xmm_src_hi); - negate_2x128 (xmm_src_lo, xmm_src_hi, &xmm_src_lo, &xmm_src_hi); - - pix_multiply_2x128 (&xmm_dst_lo, &xmm_dst_hi, - &xmm_src_lo, &xmm_src_hi, - &xmm_dst_lo, &xmm_dst_hi); - - save_128_aligned ( - (__m128i*)pd, pack_2x128_128 (xmm_dst_lo, xmm_dst_hi)); - - ps += 4; - pd += 4; - if (pm) - pm += 4; - - w -= 4; - } - - while (w) - { - uint32_t s = combine1 (ps, pm); - uint32_t d = *pd; - - *pd++ = pack_1x64_32 ( - pix_multiply_1x64 ( - unpack_32_1x64 (d), negate_1x64 ( - expand_alpha_1x64 (unpack_32_1x64 (s))))); - ps++; - if (pm) - pm++; - w--; - } -} - -static force_inline void -core_combine_out_u_sse2 (uint32_t* pd, - const uint32_t* ps, - const uint32_t* pm, - int w) -{ - /* call prefetch hint to optimize cache load*/ - cache_prefetch ((__m128i*)ps); - cache_prefetch ((__m128i*)pd); - maybe_prefetch ((__m128i*)pm); - - while (w && ((unsigned long) pd & 15)) - { - uint32_t s = combine1 (ps, pm); - uint32_t d = *pd; - - *pd++ = pack_1x64_32 ( - pix_multiply_1x64 ( - unpack_32_1x64 (s), negate_1x64 ( - expand_alpha_1x64 (unpack_32_1x64 (d))))); - w--; - ps++; - if (pm) - pm++; - } - - /* call prefetch hint to optimize cache load*/ - cache_prefetch ((__m128i*)ps); - cache_prefetch ((__m128i*)pd); - maybe_prefetch ((__m128i*)pm); - - while (w >= 4) - { - __m128i xmm_src_lo, xmm_src_hi; - __m128i xmm_dst_lo, xmm_dst_hi; - - /* fill cache line with next memory */ - cache_prefetch_next ((__m128i*)ps); - cache_prefetch_next ((__m128i*)pd); - maybe_prefetch_next ((__m128i*)pm); - - xmm_src_hi = combine4 ((__m128i*) ps, (__m128i*)pm); - xmm_dst_hi = load_128_aligned ((__m128i*) pd); - - unpack_128_2x128 (xmm_src_hi, &xmm_src_lo, &xmm_src_hi); - unpack_128_2x128 (xmm_dst_hi, &xmm_dst_lo, &xmm_dst_hi); - - expand_alpha_2x128 (xmm_dst_lo, xmm_dst_hi, &xmm_dst_lo, &xmm_dst_hi); - negate_2x128 (xmm_dst_lo, xmm_dst_hi, &xmm_dst_lo, &xmm_dst_hi); - - pix_multiply_2x128 (&xmm_src_lo, &xmm_src_hi, - &xmm_dst_lo, &xmm_dst_hi, - &xmm_dst_lo, &xmm_dst_hi); - - save_128_aligned ( - (__m128i*)pd, pack_2x128_128 (xmm_dst_lo, xmm_dst_hi)); - - ps += 4; - pd += 4; - w -= 4; - if (pm) - pm += 4; - } - - while (w) - { - uint32_t s = combine1 (ps, pm); - uint32_t d = *pd; - - *pd++ = pack_1x64_32 ( - pix_multiply_1x64 ( - unpack_32_1x64 (s), negate_1x64 ( - expand_alpha_1x64 (unpack_32_1x64 (d))))); - w--; - ps++; - if (pm) - pm++; - } -} - -static force_inline uint32_t -core_combine_atop_u_pixel_sse2 (uint32_t src, - uint32_t dst) -{ - __m64 s = unpack_32_1x64 (src); - __m64 d = unpack_32_1x64 (dst); - - __m64 sa = negate_1x64 (expand_alpha_1x64 (s)); - __m64 da = expand_alpha_1x64 (d); - - return pack_1x64_32 (pix_add_multiply_1x64 (&s, &da, &d, &sa)); -} - -static force_inline void -core_combine_atop_u_sse2 (uint32_t* pd, - const uint32_t* ps, - const uint32_t* pm, - int w) -{ - uint32_t s, d; - - __m128i xmm_src_lo, xmm_src_hi; - __m128i xmm_dst_lo, xmm_dst_hi; - __m128i xmm_alpha_src_lo, xmm_alpha_src_hi; - __m128i xmm_alpha_dst_lo, xmm_alpha_dst_hi; - - /* call prefetch hint to optimize cache load*/ - cache_prefetch ((__m128i*)ps); - cache_prefetch ((__m128i*)pd); - maybe_prefetch ((__m128i*)pm); - - while (w && ((unsigned long) pd & 15)) - { - s = combine1 (ps, pm); - d = *pd; - - *pd++ = core_combine_atop_u_pixel_sse2 (s, d); - w--; - ps++; - if (pm) - pm++; - } - - /* call prefetch hint to optimize cache load*/ - cache_prefetch ((__m128i*)ps); - cache_prefetch ((__m128i*)pd); - maybe_prefetch ((__m128i*)pm); - - while (w >= 4) - { - /* fill cache line with next memory */ - cache_prefetch_next ((__m128i*)ps); - cache_prefetch_next ((__m128i*)pd); - maybe_prefetch_next ((__m128i*)pm); - - xmm_src_hi = combine4 ((__m128i*)ps, (__m128i*)pm); - xmm_dst_hi = load_128_aligned ((__m128i*) pd); - - unpack_128_2x128 (xmm_src_hi, &xmm_src_lo, &xmm_src_hi); - unpack_128_2x128 (xmm_dst_hi, &xmm_dst_lo, &xmm_dst_hi); - - expand_alpha_2x128 (xmm_src_lo, xmm_src_hi, - &xmm_alpha_src_lo, &xmm_alpha_src_hi); - expand_alpha_2x128 (xmm_dst_lo, xmm_dst_hi, - &xmm_alpha_dst_lo, &xmm_alpha_dst_hi); - - negate_2x128 (xmm_alpha_src_lo, xmm_alpha_src_hi, - &xmm_alpha_src_lo, &xmm_alpha_src_hi); - - pix_add_multiply_2x128 ( - &xmm_src_lo, &xmm_src_hi, &xmm_alpha_dst_lo, &xmm_alpha_dst_hi, - &xmm_dst_lo, &xmm_dst_hi, &xmm_alpha_src_lo, &xmm_alpha_src_hi, - &xmm_dst_lo, &xmm_dst_hi); - - save_128_aligned ( - (__m128i*)pd, pack_2x128_128 (xmm_dst_lo, xmm_dst_hi)); - - ps += 4; - pd += 4; - w -= 4; - if (pm) - pm += 4; - } - - while (w) - { - s = combine1 (ps, pm); - d = *pd; - - *pd++ = core_combine_atop_u_pixel_sse2 (s, d); - w--; - ps++; - if (pm) - pm++; - } -} - -static force_inline uint32_t -core_combine_reverse_atop_u_pixel_sse2 (uint32_t src, - uint32_t dst) -{ - __m64 s = unpack_32_1x64 (src); - __m64 d = unpack_32_1x64 (dst); - - __m64 sa = expand_alpha_1x64 (s); - __m64 da = negate_1x64 (expand_alpha_1x64 (d)); - - return pack_1x64_32 (pix_add_multiply_1x64 (&s, &da, &d, &sa)); -} - -static force_inline void -core_combine_reverse_atop_u_sse2 (uint32_t* pd, - const uint32_t* ps, - const uint32_t* pm, - int w) -{ - uint32_t s, d; - - __m128i xmm_src_lo, xmm_src_hi; - __m128i xmm_dst_lo, xmm_dst_hi; - __m128i xmm_alpha_src_lo, xmm_alpha_src_hi; - __m128i xmm_alpha_dst_lo, xmm_alpha_dst_hi; - - /* call prefetch hint to optimize cache load*/ - cache_prefetch ((__m128i*)ps); - cache_prefetch ((__m128i*)pd); - maybe_prefetch ((__m128i*)pm); - - while (w && ((unsigned long) pd & 15)) - { - s = combine1 (ps, pm); - d = *pd; - - *pd++ = core_combine_reverse_atop_u_pixel_sse2 (s, d); - ps++; - w--; - if (pm) - pm++; - } - - /* call prefetch hint to optimize cache load*/ - cache_prefetch ((__m128i*)ps); - cache_prefetch ((__m128i*)pd); - maybe_prefetch ((__m128i*)pm); - - while (w >= 4) - { - /* fill cache line with next memory */ - cache_prefetch_next ((__m128i*)ps); - cache_prefetch_next ((__m128i*)pd); - maybe_prefetch_next ((__m128i*)pm); - - xmm_src_hi = combine4 ((__m128i*)ps, (__m128i*)pm); - xmm_dst_hi = load_128_aligned ((__m128i*) pd); - - unpack_128_2x128 (xmm_src_hi, &xmm_src_lo, &xmm_src_hi); - unpack_128_2x128 (xmm_dst_hi, &xmm_dst_lo, &xmm_dst_hi); - - expand_alpha_2x128 (xmm_src_lo, xmm_src_hi, - &xmm_alpha_src_lo, &xmm_alpha_src_hi); - expand_alpha_2x128 (xmm_dst_lo, xmm_dst_hi, - &xmm_alpha_dst_lo, &xmm_alpha_dst_hi); - - negate_2x128 (xmm_alpha_dst_lo, xmm_alpha_dst_hi, - &xmm_alpha_dst_lo, &xmm_alpha_dst_hi); - - pix_add_multiply_2x128 ( - &xmm_src_lo, &xmm_src_hi, &xmm_alpha_dst_lo, &xmm_alpha_dst_hi, - &xmm_dst_lo, &xmm_dst_hi, &xmm_alpha_src_lo, &xmm_alpha_src_hi, - &xmm_dst_lo, &xmm_dst_hi); - - save_128_aligned ( - (__m128i*)pd, pack_2x128_128 (xmm_dst_lo, xmm_dst_hi)); - - ps += 4; - pd += 4; - w -= 4; - if (pm) - pm += 4; - } - - while (w) - { - s = combine1 (ps, pm); - d = *pd; - - *pd++ = core_combine_reverse_atop_u_pixel_sse2 (s, d); - ps++; - w--; - if (pm) - pm++; - } -} - -static force_inline uint32_t -core_combine_xor_u_pixel_sse2 (uint32_t src, - uint32_t dst) -{ - __m64 s = unpack_32_1x64 (src); - __m64 d = unpack_32_1x64 (dst); - - __m64 neg_d = negate_1x64 (expand_alpha_1x64 (d)); - __m64 neg_s = negate_1x64 (expand_alpha_1x64 (s)); - - return pack_1x64_32 (pix_add_multiply_1x64 (&s, &neg_d, &d, &neg_s)); -} - -static force_inline void -core_combine_xor_u_sse2 (uint32_t* dst, - const uint32_t* src, - const uint32_t *mask, - int width) -{ - int w = width; - uint32_t s, d; - uint32_t* pd = dst; - const uint32_t* ps = src; - const uint32_t* pm = mask; - - __m128i xmm_src, xmm_src_lo, xmm_src_hi; - __m128i xmm_dst, xmm_dst_lo, xmm_dst_hi; - __m128i xmm_alpha_src_lo, xmm_alpha_src_hi; - __m128i xmm_alpha_dst_lo, xmm_alpha_dst_hi; - - /* call prefetch hint to optimize cache load*/ - cache_prefetch ((__m128i*)ps); - cache_prefetch ((__m128i*)pd); - maybe_prefetch ((__m128i*)pm); - - while (w && ((unsigned long) pd & 15)) - { - s = combine1 (ps, pm); - d = *pd; - - *pd++ = core_combine_xor_u_pixel_sse2 (s, d); - w--; - ps++; - if (pm) - pm++; - } - - /* call prefetch hint to optimize cache load*/ - cache_prefetch ((__m128i*)ps); - cache_prefetch ((__m128i*)pd); - maybe_prefetch ((__m128i*)pm); - - while (w >= 4) - { - /* fill cache line with next memory */ - cache_prefetch_next ((__m128i*)ps); - cache_prefetch_next ((__m128i*)pd); - maybe_prefetch_next ((__m128i*)pm); - - xmm_src = combine4 ((__m128i*) ps, (__m128i*) pm); - xmm_dst = load_128_aligned ((__m128i*) pd); - - unpack_128_2x128 (xmm_src, &xmm_src_lo, &xmm_src_hi); - unpack_128_2x128 (xmm_dst, &xmm_dst_lo, &xmm_dst_hi); - - expand_alpha_2x128 (xmm_src_lo, xmm_src_hi, - &xmm_alpha_src_lo, &xmm_alpha_src_hi); - expand_alpha_2x128 (xmm_dst_lo, xmm_dst_hi, - &xmm_alpha_dst_lo, &xmm_alpha_dst_hi); - - negate_2x128 (xmm_alpha_src_lo, xmm_alpha_src_hi, - &xmm_alpha_src_lo, &xmm_alpha_src_hi); - negate_2x128 (xmm_alpha_dst_lo, xmm_alpha_dst_hi, - &xmm_alpha_dst_lo, &xmm_alpha_dst_hi); - - pix_add_multiply_2x128 ( - &xmm_src_lo, &xmm_src_hi, &xmm_alpha_dst_lo, &xmm_alpha_dst_hi, - &xmm_dst_lo, &xmm_dst_hi, &xmm_alpha_src_lo, &xmm_alpha_src_hi, - &xmm_dst_lo, &xmm_dst_hi); - - save_128_aligned ( - (__m128i*)pd, pack_2x128_128 (xmm_dst_lo, xmm_dst_hi)); - - ps += 4; - pd += 4; - w -= 4; - if (pm) - pm += 4; - } - - while (w) - { - s = combine1 (ps, pm); - d = *pd; - - *pd++ = core_combine_xor_u_pixel_sse2 (s, d); - w--; - ps++; - if (pm) - pm++; - } -} - -static force_inline void -core_combine_add_u_sse2 (uint32_t* dst, - const uint32_t* src, - const uint32_t* mask, - int width) -{ - int w = width; - uint32_t s, d; - uint32_t* pd = dst; - const uint32_t* ps = src; - const uint32_t* pm = mask; - - /* call prefetch hint to optimize cache load*/ - cache_prefetch ((__m128i*)ps); - cache_prefetch ((__m128i*)pd); - maybe_prefetch ((__m128i*)pm); - - while (w && (unsigned long)pd & 15) - { - s = combine1 (ps, pm); - d = *pd; - - ps++; - if (pm) - pm++; - *pd++ = _mm_cvtsi64_si32 ( - _mm_adds_pu8 (_mm_cvtsi32_si64 (s), _mm_cvtsi32_si64 (d))); - w--; - } - - /* call prefetch hint to optimize cache load*/ - cache_prefetch ((__m128i*)ps); - cache_prefetch ((__m128i*)pd); - maybe_prefetch ((__m128i*)pm); - - while (w >= 4) - { - __m128i s; - - /* fill cache line with next memory */ - cache_prefetch_next ((__m128i*)ps); - cache_prefetch_next ((__m128i*)pd); - maybe_prefetch_next ((__m128i*)pm); - - s = combine4 ((__m128i*)ps, (__m128i*)pm); - - save_128_aligned ( - (__m128i*)pd, _mm_adds_epu8 (s, load_128_aligned ((__m128i*)pd))); - - pd += 4; - ps += 4; - if (pm) - pm += 4; - w -= 4; - } - - while (w--) - { - s = combine1 (ps, pm); - d = *pd; - - ps++; - *pd++ = _mm_cvtsi64_si32 ( - _mm_adds_pu8 (_mm_cvtsi32_si64 (s), _mm_cvtsi32_si64 (d))); - if (pm) - pm++; - } -} - -static force_inline uint32_t -core_combine_saturate_u_pixel_sse2 (uint32_t src, - uint32_t dst) -{ - __m64 ms = unpack_32_1x64 (src); - __m64 md = unpack_32_1x64 (dst); - uint32_t sa = src >> 24; - uint32_t da = ~dst >> 24; - - if (sa > da) - { - ms = pix_multiply_1x64 ( - ms, expand_alpha_1x64 (unpack_32_1x64 (DIV_UN8 (da, sa) << 24))); - } - - return pack_1x64_32 (_mm_adds_pu16 (md, ms)); -} - -static force_inline void -core_combine_saturate_u_sse2 (uint32_t * pd, - const uint32_t *ps, - const uint32_t *pm, - int w) -{ - uint32_t s, d; - - uint32_t pack_cmp; - __m128i xmm_src, xmm_dst; - - /* call prefetch hint to optimize cache load*/ - cache_prefetch ((__m128i*)ps); - cache_prefetch ((__m128i*)pd); - maybe_prefetch ((__m128i*)pm); - - while (w && (unsigned long)pd & 15) - { - s = combine1 (ps, pm); - d = *pd; - - *pd++ = core_combine_saturate_u_pixel_sse2 (s, d); - w--; - ps++; - if (pm) - pm++; - } - - /* call prefetch hint to optimize cache load*/ - cache_prefetch ((__m128i*)ps); - cache_prefetch ((__m128i*)pd); - maybe_prefetch ((__m128i*)pm); - - while (w >= 4) - { - /* fill cache line with next memory */ - cache_prefetch_next ((__m128i*)ps); - cache_prefetch_next ((__m128i*)pd); - maybe_prefetch_next ((__m128i*)pm); - - xmm_dst = load_128_aligned ((__m128i*)pd); - xmm_src = combine4 ((__m128i*)ps, (__m128i*)pm); - - pack_cmp = _mm_movemask_epi8 ( - _mm_cmpgt_epi32 ( - _mm_srli_epi32 (xmm_src, 24), - _mm_srli_epi32 (_mm_xor_si128 (xmm_dst, mask_ff000000), 24))); - - /* if some alpha src is grater than respective ~alpha dst */ - if (pack_cmp) - { - s = combine1 (ps++, pm); - d = *pd; - *pd++ = core_combine_saturate_u_pixel_sse2 (s, d); - if (pm) - pm++; - - s = combine1 (ps++, pm); - d = *pd; - *pd++ = core_combine_saturate_u_pixel_sse2 (s, d); - if (pm) - pm++; - - s = combine1 (ps++, pm); - d = *pd; - *pd++ = core_combine_saturate_u_pixel_sse2 (s, d); - if (pm) - pm++; - - s = combine1 (ps++, pm); - d = *pd; - *pd++ = core_combine_saturate_u_pixel_sse2 (s, d); - if (pm) - pm++; - } - else - { - save_128_aligned ((__m128i*)pd, _mm_adds_epu8 (xmm_dst, xmm_src)); - - pd += 4; - ps += 4; - if (pm) - pm += 4; - } - - w -= 4; - } - - while (w--) - { - s = combine1 (ps, pm); - d = *pd; - - *pd++ = core_combine_saturate_u_pixel_sse2 (s, d); - ps++; - if (pm) - pm++; - } -} - -static force_inline void -core_combine_src_ca_sse2 (uint32_t* pd, - const uint32_t* ps, - const uint32_t *pm, - int w) -{ - uint32_t s, m; - - __m128i xmm_src_lo, xmm_src_hi; - __m128i xmm_mask_lo, xmm_mask_hi; - __m128i xmm_dst_lo, xmm_dst_hi; - - /* call prefetch hint to optimize cache load*/ - cache_prefetch ((__m128i*)ps); - cache_prefetch ((__m128i*)pd); - cache_prefetch ((__m128i*)pm); - - while (w && (unsigned long)pd & 15) - { - s = *ps++; - m = *pm++; - *pd++ = pack_1x64_32 ( - pix_multiply_1x64 (unpack_32_1x64 (s), unpack_32_1x64 (m))); - w--; - } - - /* call prefetch hint to optimize cache load*/ - cache_prefetch ((__m128i*)ps); - cache_prefetch ((__m128i*)pd); - cache_prefetch ((__m128i*)pm); - - while (w >= 4) - { - /* fill cache line with next memory */ - cache_prefetch_next ((__m128i*)ps); - cache_prefetch_next ((__m128i*)pd); - cache_prefetch_next ((__m128i*)pm); - - xmm_src_hi = load_128_unaligned ((__m128i*)ps); - xmm_mask_hi = load_128_unaligned ((__m128i*)pm); - - unpack_128_2x128 (xmm_src_hi, &xmm_src_lo, &xmm_src_hi); - unpack_128_2x128 (xmm_mask_hi, &xmm_mask_lo, &xmm_mask_hi); - - pix_multiply_2x128 (&xmm_src_lo, &xmm_src_hi, - &xmm_mask_lo, &xmm_mask_hi, - &xmm_dst_lo, &xmm_dst_hi); - - save_128_aligned ( - (__m128i*)pd, pack_2x128_128 (xmm_dst_lo, xmm_dst_hi)); - - ps += 4; - pd += 4; - pm += 4; - w -= 4; - } - - while (w) - { - s = *ps++; - m = *pm++; - *pd++ = pack_1x64_32 ( - pix_multiply_1x64 (unpack_32_1x64 (s), unpack_32_1x64 (m))); - w--; - } -} - -static force_inline uint32_t -core_combine_over_ca_pixel_sse2 (uint32_t src, - uint32_t mask, - uint32_t dst) -{ - __m64 s = unpack_32_1x64 (src); - __m64 expAlpha = expand_alpha_1x64 (s); - __m64 unpk_mask = unpack_32_1x64 (mask); - __m64 unpk_dst = unpack_32_1x64 (dst); - - return pack_1x64_32 (in_over_1x64 (&s, &expAlpha, &unpk_mask, &unpk_dst)); -} - -static force_inline void -core_combine_over_ca_sse2 (uint32_t* pd, - const uint32_t* ps, - const uint32_t *pm, - int w) -{ - uint32_t s, m, d; - - __m128i xmm_alpha_lo, xmm_alpha_hi; - __m128i xmm_src_lo, xmm_src_hi; - __m128i xmm_dst_lo, xmm_dst_hi; - __m128i xmm_mask_lo, xmm_mask_hi; - - /* call prefetch hint to optimize cache load*/ - cache_prefetch ((__m128i*)ps); - cache_prefetch ((__m128i*)pd); - cache_prefetch ((__m128i*)pm); - - while (w && (unsigned long)pd & 15) - { - s = *ps++; - m = *pm++; - d = *pd; - - *pd++ = core_combine_over_ca_pixel_sse2 (s, m, d); - w--; - } - - /* call prefetch hint to optimize cache load*/ - cache_prefetch ((__m128i*)ps); - cache_prefetch ((__m128i*)pd); - cache_prefetch ((__m128i*)pm); - - while (w >= 4) - { - /* fill cache line with next memory */ - cache_prefetch_next ((__m128i*)ps); - cache_prefetch_next ((__m128i*)pd); - cache_prefetch_next ((__m128i*)pm); - - xmm_dst_hi = load_128_aligned ((__m128i*)pd); - xmm_src_hi = load_128_unaligned ((__m128i*)ps); - xmm_mask_hi = load_128_unaligned ((__m128i*)pm); - - unpack_128_2x128 (xmm_dst_hi, &xmm_dst_lo, &xmm_dst_hi); - unpack_128_2x128 (xmm_src_hi, &xmm_src_lo, &xmm_src_hi); - unpack_128_2x128 (xmm_mask_hi, &xmm_mask_lo, &xmm_mask_hi); - - expand_alpha_2x128 (xmm_src_lo, xmm_src_hi, - &xmm_alpha_lo, &xmm_alpha_hi); - - in_over_2x128 (&xmm_src_lo, &xmm_src_hi, - &xmm_alpha_lo, &xmm_alpha_hi, - &xmm_mask_lo, &xmm_mask_hi, - &xmm_dst_lo, &xmm_dst_hi); - - save_128_aligned ( - (__m128i*)pd, pack_2x128_128 (xmm_dst_lo, xmm_dst_hi)); - - ps += 4; - pd += 4; - pm += 4; - w -= 4; - } - - while (w) - { - s = *ps++; - m = *pm++; - d = *pd; - - *pd++ = core_combine_over_ca_pixel_sse2 (s, m, d); - w--; - } -} - -static force_inline uint32_t -core_combine_over_reverse_ca_pixel_sse2 (uint32_t src, - uint32_t mask, - uint32_t dst) -{ - __m64 d = unpack_32_1x64 (dst); - - return pack_1x64_32 ( - over_1x64 (d, expand_alpha_1x64 (d), - pix_multiply_1x64 (unpack_32_1x64 (src), - unpack_32_1x64 (mask)))); -} - -static force_inline void -core_combine_over_reverse_ca_sse2 (uint32_t* pd, - const uint32_t* ps, - const uint32_t *pm, - int w) -{ - uint32_t s, m, d; - - __m128i xmm_alpha_lo, xmm_alpha_hi; - __m128i xmm_src_lo, xmm_src_hi; - __m128i xmm_dst_lo, xmm_dst_hi; - __m128i xmm_mask_lo, xmm_mask_hi; - - /* call prefetch hint to optimize cache load*/ - cache_prefetch ((__m128i*)ps); - cache_prefetch ((__m128i*)pd); - cache_prefetch ((__m128i*)pm); - - while (w && (unsigned long)pd & 15) - { - s = *ps++; - m = *pm++; - d = *pd; - - *pd++ = core_combine_over_reverse_ca_pixel_sse2 (s, m, d); - w--; - } - - /* call prefetch hint to optimize cache load*/ - cache_prefetch ((__m128i*)ps); - cache_prefetch ((__m128i*)pd); - cache_prefetch ((__m128i*)pm); - - while (w >= 4) - { - /* fill cache line with next memory */ - cache_prefetch_next ((__m128i*)ps); - cache_prefetch_next ((__m128i*)pd); - cache_prefetch_next ((__m128i*)pm); - - xmm_dst_hi = load_128_aligned ((__m128i*)pd); - xmm_src_hi = load_128_unaligned ((__m128i*)ps); - xmm_mask_hi = load_128_unaligned ((__m128i*)pm); - - unpack_128_2x128 (xmm_dst_hi, &xmm_dst_lo, &xmm_dst_hi); - unpack_128_2x128 (xmm_src_hi, &xmm_src_lo, &xmm_src_hi); - unpack_128_2x128 (xmm_mask_hi, &xmm_mask_lo, &xmm_mask_hi); - - expand_alpha_2x128 (xmm_dst_lo, xmm_dst_hi, - &xmm_alpha_lo, &xmm_alpha_hi); - pix_multiply_2x128 (&xmm_src_lo, &xmm_src_hi, - &xmm_mask_lo, &xmm_mask_hi, - &xmm_mask_lo, &xmm_mask_hi); - - over_2x128 (&xmm_dst_lo, &xmm_dst_hi, - &xmm_alpha_lo, &xmm_alpha_hi, - &xmm_mask_lo, &xmm_mask_hi); - - save_128_aligned ( - (__m128i*)pd, pack_2x128_128 (xmm_mask_lo, xmm_mask_hi)); - - ps += 4; - pd += 4; - pm += 4; - w -= 4; - } - - while (w) - { - s = *ps++; - m = *pm++; - d = *pd; - - *pd++ = core_combine_over_reverse_ca_pixel_sse2 (s, m, d); - w--; - } -} - -static force_inline void -core_combine_in_ca_sse2 (uint32_t * pd, - const uint32_t *ps, - const uint32_t *pm, - int w) -{ - uint32_t s, m, d; - - __m128i xmm_alpha_lo, xmm_alpha_hi; - __m128i xmm_src_lo, xmm_src_hi; - __m128i xmm_dst_lo, xmm_dst_hi; - __m128i xmm_mask_lo, xmm_mask_hi; - - /* call prefetch hint to optimize cache load*/ - cache_prefetch ((__m128i*)ps); - cache_prefetch ((__m128i*)pd); - cache_prefetch ((__m128i*)pm); - - while (w && (unsigned long)pd & 15) - { - s = *ps++; - m = *pm++; - d = *pd; - - *pd++ = pack_1x64_32 ( - pix_multiply_1x64 ( - pix_multiply_1x64 (unpack_32_1x64 (s), unpack_32_1x64 (m)), - expand_alpha_1x64 (unpack_32_1x64 (d)))); - - w--; - } - - /* call prefetch hint to optimize cache load*/ - cache_prefetch ((__m128i*)ps); - cache_prefetch ((__m128i*)pd); - cache_prefetch ((__m128i*)pm); - - while (w >= 4) - { - /* fill cache line with next memory */ - cache_prefetch_next ((__m128i*)ps); - cache_prefetch_next ((__m128i*)pd); - cache_prefetch_next ((__m128i*)pm); - - xmm_dst_hi = load_128_aligned ((__m128i*)pd); - xmm_src_hi = load_128_unaligned ((__m128i*)ps); - xmm_mask_hi = load_128_unaligned ((__m128i*)pm); - - unpack_128_2x128 (xmm_dst_hi, &xmm_dst_lo, &xmm_dst_hi); - unpack_128_2x128 (xmm_src_hi, &xmm_src_lo, &xmm_src_hi); - unpack_128_2x128 (xmm_mask_hi, &xmm_mask_lo, &xmm_mask_hi); - - expand_alpha_2x128 (xmm_dst_lo, xmm_dst_hi, - &xmm_alpha_lo, &xmm_alpha_hi); - - pix_multiply_2x128 (&xmm_src_lo, &xmm_src_hi, - &xmm_mask_lo, &xmm_mask_hi, - &xmm_dst_lo, &xmm_dst_hi); - - pix_multiply_2x128 (&xmm_dst_lo, &xmm_dst_hi, - &xmm_alpha_lo, &xmm_alpha_hi, - &xmm_dst_lo, &xmm_dst_hi); - - save_128_aligned ( - (__m128i*)pd, pack_2x128_128 (xmm_dst_lo, xmm_dst_hi)); - - ps += 4; - pd += 4; - pm += 4; - w -= 4; - } - - while (w) - { - s = *ps++; - m = *pm++; - d = *pd; - - *pd++ = pack_1x64_32 ( - pix_multiply_1x64 ( - pix_multiply_1x64 ( - unpack_32_1x64 (s), unpack_32_1x64 (m)), - expand_alpha_1x64 (unpack_32_1x64 (d)))); - - w--; - } -} - -static force_inline void -core_combine_in_reverse_ca_sse2 (uint32_t * pd, - const uint32_t *ps, - const uint32_t *pm, - int w) -{ - uint32_t s, m, d; - - __m128i xmm_alpha_lo, xmm_alpha_hi; - __m128i xmm_src_lo, xmm_src_hi; - __m128i xmm_dst_lo, xmm_dst_hi; - __m128i xmm_mask_lo, xmm_mask_hi; - - /* call prefetch hint to optimize cache load*/ - cache_prefetch ((__m128i*)ps); - cache_prefetch ((__m128i*)pd); - cache_prefetch ((__m128i*)pm); - - while (w && (unsigned long)pd & 15) - { - s = *ps++; - m = *pm++; - d = *pd; - - *pd++ = pack_1x64_32 ( - pix_multiply_1x64 ( - unpack_32_1x64 (d), - pix_multiply_1x64 (unpack_32_1x64 (m), - expand_alpha_1x64 (unpack_32_1x64 (s))))); - w--; - } - - /* call prefetch hint to optimize cache load*/ - cache_prefetch ((__m128i*)ps); - cache_prefetch ((__m128i*)pd); - cache_prefetch ((__m128i*)pm); - - while (w >= 4) - { - /* fill cache line with next memory */ - cache_prefetch_next ((__m128i*)ps); - cache_prefetch_next ((__m128i*)pd); - cache_prefetch_next ((__m128i*)pm); - - xmm_dst_hi = load_128_aligned ((__m128i*)pd); - xmm_src_hi = load_128_unaligned ((__m128i*)ps); - xmm_mask_hi = load_128_unaligned ((__m128i*)pm); - - unpack_128_2x128 (xmm_dst_hi, &xmm_dst_lo, &xmm_dst_hi); - unpack_128_2x128 (xmm_src_hi, &xmm_src_lo, &xmm_src_hi); - unpack_128_2x128 (xmm_mask_hi, &xmm_mask_lo, &xmm_mask_hi); - - expand_alpha_2x128 (xmm_src_lo, xmm_src_hi, - &xmm_alpha_lo, &xmm_alpha_hi); - pix_multiply_2x128 (&xmm_mask_lo, &xmm_mask_hi, - &xmm_alpha_lo, &xmm_alpha_hi, - &xmm_alpha_lo, &xmm_alpha_hi); - - pix_multiply_2x128 (&xmm_dst_lo, &xmm_dst_hi, - &xmm_alpha_lo, &xmm_alpha_hi, - &xmm_dst_lo, &xmm_dst_hi); - - save_128_aligned ( - (__m128i*)pd, pack_2x128_128 (xmm_dst_lo, xmm_dst_hi)); - - ps += 4; - pd += 4; - pm += 4; - w -= 4; - } - - while (w) - { - s = *ps++; - m = *pm++; - d = *pd; - - *pd++ = pack_1x64_32 ( - pix_multiply_1x64 ( - unpack_32_1x64 (d), - pix_multiply_1x64 (unpack_32_1x64 (m), - expand_alpha_1x64 (unpack_32_1x64 (s))))); - w--; - } -} - -static force_inline void -core_combine_out_ca_sse2 (uint32_t * pd, - const uint32_t *ps, - const uint32_t *pm, - int w) -{ - uint32_t s, m, d; - - __m128i xmm_alpha_lo, xmm_alpha_hi; - __m128i xmm_src_lo, xmm_src_hi; - __m128i xmm_dst_lo, xmm_dst_hi; - __m128i xmm_mask_lo, xmm_mask_hi; - - /* call prefetch hint to optimize cache load*/ - cache_prefetch ((__m128i*)ps); - cache_prefetch ((__m128i*)pd); - cache_prefetch ((__m128i*)pm); - - while (w && (unsigned long)pd & 15) - { - s = *ps++; - m = *pm++; - d = *pd; - - *pd++ = pack_1x64_32 ( - pix_multiply_1x64 ( - pix_multiply_1x64 ( - unpack_32_1x64 (s), unpack_32_1x64 (m)), - negate_1x64 (expand_alpha_1x64 (unpack_32_1x64 (d))))); - w--; - } - - /* call prefetch hint to optimize cache load*/ - cache_prefetch ((__m128i*)ps); - cache_prefetch ((__m128i*)pd); - cache_prefetch ((__m128i*)pm); - - while (w >= 4) - { - /* fill cache line with next memory */ - cache_prefetch_next ((__m128i*)ps); - cache_prefetch_next ((__m128i*)pd); - cache_prefetch_next ((__m128i*)pm); - - xmm_dst_hi = load_128_aligned ((__m128i*)pd); - xmm_src_hi = load_128_unaligned ((__m128i*)ps); - xmm_mask_hi = load_128_unaligned ((__m128i*)pm); - - unpack_128_2x128 (xmm_dst_hi, &xmm_dst_lo, &xmm_dst_hi); - unpack_128_2x128 (xmm_src_hi, &xmm_src_lo, &xmm_src_hi); - unpack_128_2x128 (xmm_mask_hi, &xmm_mask_lo, &xmm_mask_hi); - - expand_alpha_2x128 (xmm_dst_lo, xmm_dst_hi, - &xmm_alpha_lo, &xmm_alpha_hi); - negate_2x128 (xmm_alpha_lo, xmm_alpha_hi, - &xmm_alpha_lo, &xmm_alpha_hi); - - pix_multiply_2x128 (&xmm_src_lo, &xmm_src_hi, - &xmm_mask_lo, &xmm_mask_hi, - &xmm_dst_lo, &xmm_dst_hi); - pix_multiply_2x128 (&xmm_dst_lo, &xmm_dst_hi, - &xmm_alpha_lo, &xmm_alpha_hi, - &xmm_dst_lo, &xmm_dst_hi); - - save_128_aligned ( - (__m128i*)pd, pack_2x128_128 (xmm_dst_lo, xmm_dst_hi)); - - ps += 4; - pd += 4; - pm += 4; - w -= 4; - } - - while (w) - { - s = *ps++; - m = *pm++; - d = *pd; - - *pd++ = pack_1x64_32 ( - pix_multiply_1x64 ( - pix_multiply_1x64 ( - unpack_32_1x64 (s), unpack_32_1x64 (m)), - negate_1x64 (expand_alpha_1x64 (unpack_32_1x64 (d))))); - - w--; - } -} - -static force_inline void -core_combine_out_reverse_ca_sse2 (uint32_t * pd, - const uint32_t *ps, - const uint32_t *pm, - int w) -{ - uint32_t s, m, d; - - __m128i xmm_alpha_lo, xmm_alpha_hi; - __m128i xmm_src_lo, xmm_src_hi; - __m128i xmm_dst_lo, xmm_dst_hi; - __m128i xmm_mask_lo, xmm_mask_hi; - - /* call prefetch hint to optimize cache load*/ - cache_prefetch ((__m128i*)ps); - cache_prefetch ((__m128i*)pd); - cache_prefetch ((__m128i*)pm); - - while (w && (unsigned long)pd & 15) - { - s = *ps++; - m = *pm++; - d = *pd; - - *pd++ = pack_1x64_32 ( - pix_multiply_1x64 ( - unpack_32_1x64 (d), - negate_1x64 (pix_multiply_1x64 ( - unpack_32_1x64 (m), - expand_alpha_1x64 (unpack_32_1x64 (s)))))); - w--; - } - - /* call prefetch hint to optimize cache load*/ - cache_prefetch ((__m128i*)ps); - cache_prefetch ((__m128i*)pd); - cache_prefetch ((__m128i*)pm); - - while (w >= 4) - { - /* fill cache line with next memory */ - cache_prefetch_next ((__m128i*)ps); - cache_prefetch_next ((__m128i*)pd); - cache_prefetch_next ((__m128i*)pm); - - xmm_dst_hi = load_128_aligned ((__m128i*)pd); - xmm_src_hi = load_128_unaligned ((__m128i*)ps); - xmm_mask_hi = load_128_unaligned ((__m128i*)pm); - - unpack_128_2x128 (xmm_dst_hi, &xmm_dst_lo, &xmm_dst_hi); - unpack_128_2x128 (xmm_src_hi, &xmm_src_lo, &xmm_src_hi); - unpack_128_2x128 (xmm_mask_hi, &xmm_mask_lo, &xmm_mask_hi); - - expand_alpha_2x128 (xmm_src_lo, xmm_src_hi, - &xmm_alpha_lo, &xmm_alpha_hi); - - pix_multiply_2x128 (&xmm_mask_lo, &xmm_mask_hi, - &xmm_alpha_lo, &xmm_alpha_hi, - &xmm_mask_lo, &xmm_mask_hi); - - negate_2x128 (xmm_mask_lo, xmm_mask_hi, - &xmm_mask_lo, &xmm_mask_hi); - - pix_multiply_2x128 (&xmm_dst_lo, &xmm_dst_hi, - &xmm_mask_lo, &xmm_mask_hi, - &xmm_dst_lo, &xmm_dst_hi); - - save_128_aligned ( - (__m128i*)pd, pack_2x128_128 (xmm_dst_lo, xmm_dst_hi)); - - ps += 4; - pd += 4; - pm += 4; - w -= 4; - } - - while (w) - { - s = *ps++; - m = *pm++; - d = *pd; - - *pd++ = pack_1x64_32 ( - pix_multiply_1x64 ( - unpack_32_1x64 (d), - negate_1x64 (pix_multiply_1x64 ( - unpack_32_1x64 (m), - expand_alpha_1x64 (unpack_32_1x64 (s)))))); - w--; - } -} - -static force_inline uint32_t -core_combine_atop_ca_pixel_sse2 (uint32_t src, - uint32_t mask, - uint32_t dst) -{ - __m64 m = unpack_32_1x64 (mask); - __m64 s = unpack_32_1x64 (src); - __m64 d = unpack_32_1x64 (dst); - __m64 sa = expand_alpha_1x64 (s); - __m64 da = expand_alpha_1x64 (d); - - s = pix_multiply_1x64 (s, m); - m = negate_1x64 (pix_multiply_1x64 (m, sa)); - - return pack_1x64_32 (pix_add_multiply_1x64 (&d, &m, &s, &da)); -} - -static force_inline void -core_combine_atop_ca_sse2 (uint32_t * pd, - const uint32_t *ps, - const uint32_t *pm, - int w) -{ - uint32_t s, m, d; - - __m128i xmm_src_lo, xmm_src_hi; - __m128i xmm_dst_lo, xmm_dst_hi; - __m128i xmm_alpha_src_lo, xmm_alpha_src_hi; - __m128i xmm_alpha_dst_lo, xmm_alpha_dst_hi; - __m128i xmm_mask_lo, xmm_mask_hi; - - /* call prefetch hint to optimize cache load*/ - cache_prefetch ((__m128i*)ps); - cache_prefetch ((__m128i*)pd); - cache_prefetch ((__m128i*)pm); - - while (w && (unsigned long)pd & 15) - { - s = *ps++; - m = *pm++; - d = *pd; - - *pd++ = core_combine_atop_ca_pixel_sse2 (s, m, d); - w--; - } - - /* call prefetch hint to optimize cache load*/ - cache_prefetch ((__m128i*)ps); - cache_prefetch ((__m128i*)pd); - cache_prefetch ((__m128i*)pm); - - while (w >= 4) - { - /* fill cache line with next memory */ - cache_prefetch_next ((__m128i*)ps); - cache_prefetch_next ((__m128i*)pd); - cache_prefetch_next ((__m128i*)pm); - - xmm_dst_hi = load_128_aligned ((__m128i*)pd); - xmm_src_hi = load_128_unaligned ((__m128i*)ps); - xmm_mask_hi = load_128_unaligned ((__m128i*)pm); - - unpack_128_2x128 (xmm_dst_hi, &xmm_dst_lo, &xmm_dst_hi); - unpack_128_2x128 (xmm_src_hi, &xmm_src_lo, &xmm_src_hi); - unpack_128_2x128 (xmm_mask_hi, &xmm_mask_lo, &xmm_mask_hi); - - expand_alpha_2x128 (xmm_src_lo, xmm_src_hi, - &xmm_alpha_src_lo, &xmm_alpha_src_hi); - expand_alpha_2x128 (xmm_dst_lo, xmm_dst_hi, - &xmm_alpha_dst_lo, &xmm_alpha_dst_hi); - - pix_multiply_2x128 (&xmm_src_lo, &xmm_src_hi, - &xmm_mask_lo, &xmm_mask_hi, - &xmm_src_lo, &xmm_src_hi); - pix_multiply_2x128 (&xmm_mask_lo, &xmm_mask_hi, - &xmm_alpha_src_lo, &xmm_alpha_src_hi, - &xmm_mask_lo, &xmm_mask_hi); - - negate_2x128 (xmm_mask_lo, xmm_mask_hi, &xmm_mask_lo, &xmm_mask_hi); - - pix_add_multiply_2x128 ( - &xmm_dst_lo, &xmm_dst_hi, &xmm_mask_lo, &xmm_mask_hi, - &xmm_src_lo, &xmm_src_hi, &xmm_alpha_dst_lo, &xmm_alpha_dst_hi, - &xmm_dst_lo, &xmm_dst_hi); - - save_128_aligned ( - (__m128i*)pd, pack_2x128_128 (xmm_dst_lo, xmm_dst_hi)); - - ps += 4; - pd += 4; - pm += 4; - w -= 4; - } - - while (w) - { - s = *ps++; - m = *pm++; - d = *pd; - - *pd++ = core_combine_atop_ca_pixel_sse2 (s, m, d); - w--; - } -} - -static force_inline uint32_t -core_combine_reverse_atop_ca_pixel_sse2 (uint32_t src, - uint32_t mask, - uint32_t dst) -{ - __m64 m = unpack_32_1x64 (mask); - __m64 s = unpack_32_1x64 (src); - __m64 d = unpack_32_1x64 (dst); - - __m64 da = negate_1x64 (expand_alpha_1x64 (d)); - __m64 sa = expand_alpha_1x64 (s); - - s = pix_multiply_1x64 (s, m); - m = pix_multiply_1x64 (m, sa); - - return pack_1x64_32 (pix_add_multiply_1x64 (&d, &m, &s, &da)); -} - -static force_inline void -core_combine_reverse_atop_ca_sse2 (uint32_t * pd, - const uint32_t *ps, - const uint32_t *pm, - int w) -{ - uint32_t s, m, d; - - __m128i xmm_src_lo, xmm_src_hi; - __m128i xmm_dst_lo, xmm_dst_hi; - __m128i xmm_alpha_src_lo, xmm_alpha_src_hi; - __m128i xmm_alpha_dst_lo, xmm_alpha_dst_hi; - __m128i xmm_mask_lo, xmm_mask_hi; - - /* call prefetch hint to optimize cache load*/ - cache_prefetch ((__m128i*)ps); - cache_prefetch ((__m128i*)pd); - cache_prefetch ((__m128i*)pm); - - while (w && (unsigned long)pd & 15) - { - s = *ps++; - m = *pm++; - d = *pd; - - *pd++ = core_combine_reverse_atop_ca_pixel_sse2 (s, m, d); - w--; - } - - /* call prefetch hint to optimize cache load*/ - cache_prefetch ((__m128i*)ps); - cache_prefetch ((__m128i*)pd); - cache_prefetch ((__m128i*)pm); - - while (w >= 4) - { - /* fill cache line with next memory */ - cache_prefetch_next ((__m128i*)ps); - cache_prefetch_next ((__m128i*)pd); - cache_prefetch_next ((__m128i*)pm); - - xmm_dst_hi = load_128_aligned ((__m128i*)pd); - xmm_src_hi = load_128_unaligned ((__m128i*)ps); - xmm_mask_hi = load_128_unaligned ((__m128i*)pm); - - unpack_128_2x128 (xmm_dst_hi, &xmm_dst_lo, &xmm_dst_hi); - unpack_128_2x128 (xmm_src_hi, &xmm_src_lo, &xmm_src_hi); - unpack_128_2x128 (xmm_mask_hi, &xmm_mask_lo, &xmm_mask_hi); - - expand_alpha_2x128 (xmm_src_lo, xmm_src_hi, - &xmm_alpha_src_lo, &xmm_alpha_src_hi); - expand_alpha_2x128 (xmm_dst_lo, xmm_dst_hi, - &xmm_alpha_dst_lo, &xmm_alpha_dst_hi); - - pix_multiply_2x128 (&xmm_src_lo, &xmm_src_hi, - &xmm_mask_lo, &xmm_mask_hi, - &xmm_src_lo, &xmm_src_hi); - pix_multiply_2x128 (&xmm_mask_lo, &xmm_mask_hi, - &xmm_alpha_src_lo, &xmm_alpha_src_hi, - &xmm_mask_lo, &xmm_mask_hi); - - negate_2x128 (xmm_alpha_dst_lo, xmm_alpha_dst_hi, - &xmm_alpha_dst_lo, &xmm_alpha_dst_hi); - - pix_add_multiply_2x128 ( - &xmm_dst_lo, &xmm_dst_hi, &xmm_mask_lo, &xmm_mask_hi, - &xmm_src_lo, &xmm_src_hi, &xmm_alpha_dst_lo, &xmm_alpha_dst_hi, - &xmm_dst_lo, &xmm_dst_hi); - - save_128_aligned ( - (__m128i*)pd, pack_2x128_128 (xmm_dst_lo, xmm_dst_hi)); - - ps += 4; - pd += 4; - pm += 4; - w -= 4; - } - - while (w) - { - s = *ps++; - m = *pm++; - d = *pd; - - *pd++ = core_combine_reverse_atop_ca_pixel_sse2 (s, m, d); - w--; - } -} - -static force_inline uint32_t -core_combine_xor_ca_pixel_sse2 (uint32_t src, - uint32_t mask, - uint32_t dst) -{ - __m64 a = unpack_32_1x64 (mask); - __m64 s = unpack_32_1x64 (src); - __m64 d = unpack_32_1x64 (dst); - - __m64 alpha_dst = negate_1x64 (pix_multiply_1x64 ( - a, expand_alpha_1x64 (s))); - __m64 dest = pix_multiply_1x64 (s, a); - __m64 alpha_src = negate_1x64 (expand_alpha_1x64 (d)); - - return pack_1x64_32 (pix_add_multiply_1x64 (&d, - &alpha_dst, - &dest, - &alpha_src)); -} - -static force_inline void -core_combine_xor_ca_sse2 (uint32_t * pd, - const uint32_t *ps, - const uint32_t *pm, - int w) -{ - uint32_t s, m, d; - - __m128i xmm_src_lo, xmm_src_hi; - __m128i xmm_dst_lo, xmm_dst_hi; - __m128i xmm_alpha_src_lo, xmm_alpha_src_hi; - __m128i xmm_alpha_dst_lo, xmm_alpha_dst_hi; - __m128i xmm_mask_lo, xmm_mask_hi; - - /* call prefetch hint to optimize cache load*/ - cache_prefetch ((__m128i*)ps); - cache_prefetch ((__m128i*)pd); - cache_prefetch ((__m128i*)pm); - - while (w && (unsigned long)pd & 15) - { - s = *ps++; - m = *pm++; - d = *pd; - - *pd++ = core_combine_xor_ca_pixel_sse2 (s, m, d); - w--; - } - - /* call prefetch hint to optimize cache load*/ - cache_prefetch ((__m128i*)ps); - cache_prefetch ((__m128i*)pd); - cache_prefetch ((__m128i*)pm); - - while (w >= 4) - { - /* fill cache line with next memory */ - cache_prefetch_next ((__m128i*)ps); - cache_prefetch_next ((__m128i*)pd); - cache_prefetch_next ((__m128i*)pm); - - xmm_dst_hi = load_128_aligned ((__m128i*)pd); - xmm_src_hi = load_128_unaligned ((__m128i*)ps); - xmm_mask_hi = load_128_unaligned ((__m128i*)pm); - - unpack_128_2x128 (xmm_dst_hi, &xmm_dst_lo, &xmm_dst_hi); - unpack_128_2x128 (xmm_src_hi, &xmm_src_lo, &xmm_src_hi); - unpack_128_2x128 (xmm_mask_hi, &xmm_mask_lo, &xmm_mask_hi); - - expand_alpha_2x128 (xmm_src_lo, xmm_src_hi, - &xmm_alpha_src_lo, &xmm_alpha_src_hi); - expand_alpha_2x128 (xmm_dst_lo, xmm_dst_hi, - &xmm_alpha_dst_lo, &xmm_alpha_dst_hi); - - pix_multiply_2x128 (&xmm_src_lo, &xmm_src_hi, - &xmm_mask_lo, &xmm_mask_hi, - &xmm_src_lo, &xmm_src_hi); - pix_multiply_2x128 (&xmm_mask_lo, &xmm_mask_hi, - &xmm_alpha_src_lo, &xmm_alpha_src_hi, - &xmm_mask_lo, &xmm_mask_hi); - - negate_2x128 (xmm_alpha_dst_lo, xmm_alpha_dst_hi, - &xmm_alpha_dst_lo, &xmm_alpha_dst_hi); - negate_2x128 (xmm_mask_lo, xmm_mask_hi, - &xmm_mask_lo, &xmm_mask_hi); - - pix_add_multiply_2x128 ( - &xmm_dst_lo, &xmm_dst_hi, &xmm_mask_lo, &xmm_mask_hi, - &xmm_src_lo, &xmm_src_hi, &xmm_alpha_dst_lo, &xmm_alpha_dst_hi, - &xmm_dst_lo, &xmm_dst_hi); - - save_128_aligned ( - (__m128i*)pd, pack_2x128_128 (xmm_dst_lo, xmm_dst_hi)); - - ps += 4; - pd += 4; - pm += 4; - w -= 4; - } - - while (w) - { - s = *ps++; - m = *pm++; - d = *pd; - - *pd++ = core_combine_xor_ca_pixel_sse2 (s, m, d); - w--; - } -} - -static force_inline void -core_combine_add_ca_sse2 (uint32_t * pd, - const uint32_t *ps, - const uint32_t *pm, - int w) -{ - uint32_t s, m, d; - - __m128i xmm_src_lo, xmm_src_hi; - __m128i xmm_dst_lo, xmm_dst_hi; - __m128i xmm_mask_lo, xmm_mask_hi; - - /* call prefetch hint to optimize cache load*/ - cache_prefetch ((__m128i*)ps); - cache_prefetch ((__m128i*)pd); - cache_prefetch ((__m128i*)pm); - - while (w && (unsigned long)pd & 15) - { - s = *ps++; - m = *pm++; - d = *pd; - - *pd++ = pack_1x64_32 ( - _mm_adds_pu8 (pix_multiply_1x64 (unpack_32_1x64 (s), - unpack_32_1x64 (m)), - unpack_32_1x64 (d))); - w--; - } - - /* call prefetch hint to optimize cache load*/ - cache_prefetch ((__m128i*)ps); - cache_prefetch ((__m128i*)pd); - cache_prefetch ((__m128i*)pm); - - while (w >= 4) - { - /* fill cache line with next memory */ - cache_prefetch_next ((__m128i*)ps); - cache_prefetch_next ((__m128i*)pd); - cache_prefetch_next ((__m128i*)pm); - - xmm_src_hi = load_128_unaligned ((__m128i*)ps); - xmm_mask_hi = load_128_unaligned ((__m128i*)pm); - xmm_dst_hi = load_128_aligned ((__m128i*)pd); - - unpack_128_2x128 (xmm_src_hi, &xmm_src_lo, &xmm_src_hi); - unpack_128_2x128 (xmm_mask_hi, &xmm_mask_lo, &xmm_mask_hi); - unpack_128_2x128 (xmm_dst_hi, &xmm_dst_lo, &xmm_dst_hi); - - pix_multiply_2x128 (&xmm_src_lo, &xmm_src_hi, - &xmm_mask_lo, &xmm_mask_hi, - &xmm_src_lo, &xmm_src_hi); - - save_128_aligned ( - (__m128i*)pd, pack_2x128_128 ( - _mm_adds_epu8 (xmm_src_lo, xmm_dst_lo), - _mm_adds_epu8 (xmm_src_hi, xmm_dst_hi))); - - ps += 4; - pd += 4; - pm += 4; - w -= 4; - } - - while (w) - { - s = *ps++; - m = *pm++; - d = *pd; - - *pd++ = pack_1x64_32 ( - _mm_adds_pu8 (pix_multiply_1x64 (unpack_32_1x64 (s), - unpack_32_1x64 (m)), - unpack_32_1x64 (d))); - w--; - } -} - -/* --------------------------------------------------- - * fb_compose_setup_sSE2 - */ -static force_inline __m64 -create_mask_16_64 (uint16_t mask) -{ - return _mm_set1_pi16 (mask); -} - -static force_inline __m128i -create_mask_16_128 (uint16_t mask) -{ - return _mm_set1_epi16 (mask); -} - -static force_inline __m64 -create_mask_2x32_64 (uint32_t mask0, - uint32_t mask1) -{ - return _mm_set_pi32 (mask0, mask1); -} - -/* Work around a code generation bug in Sun Studio 12. */ -#if defined(__SUNPRO_C) && (__SUNPRO_C >= 0x590) -# define create_mask_2x32_128(mask0, mask1) \ - (_mm_set_epi32 ((mask0), (mask1), (mask0), (mask1))) -#else -static force_inline __m128i -create_mask_2x32_128 (uint32_t mask0, - uint32_t mask1) -{ - return _mm_set_epi32 (mask0, mask1, mask0, mask1); -} -#endif - -/* SSE2 code patch for fbcompose.c */ - -static void -sse2_combine_over_u (pixman_implementation_t *imp, - pixman_op_t op, - uint32_t * dst, - const uint32_t * src, - const uint32_t * mask, - int width) -{ - core_combine_over_u_sse2 (dst, src, mask, width); - _mm_empty (); -} - -static void -sse2_combine_over_reverse_u (pixman_implementation_t *imp, - pixman_op_t op, - uint32_t * dst, - const uint32_t * src, - const uint32_t * mask, - int width) -{ - core_combine_over_reverse_u_sse2 (dst, src, mask, width); - _mm_empty (); -} - -static void -sse2_combine_in_u (pixman_implementation_t *imp, - pixman_op_t op, - uint32_t * dst, - const uint32_t * src, - const uint32_t * mask, - int width) -{ - core_combine_in_u_sse2 (dst, src, mask, width); - _mm_empty (); -} - -static void -sse2_combine_in_reverse_u (pixman_implementation_t *imp, - pixman_op_t op, - uint32_t * dst, - const uint32_t * src, - const uint32_t * mask, - int width) -{ - core_combine_reverse_in_u_sse2 (dst, src, mask, width); - _mm_empty (); -} - -static void -sse2_combine_out_u (pixman_implementation_t *imp, - pixman_op_t op, - uint32_t * dst, - const uint32_t * src, - const uint32_t * mask, - int width) -{ - core_combine_out_u_sse2 (dst, src, mask, width); - _mm_empty (); -} - -static void -sse2_combine_out_reverse_u (pixman_implementation_t *imp, - pixman_op_t op, - uint32_t * dst, - const uint32_t * src, - const uint32_t * mask, - int width) -{ - core_combine_reverse_out_u_sse2 (dst, src, mask, width); - _mm_empty (); -} - -static void -sse2_combine_atop_u (pixman_implementation_t *imp, - pixman_op_t op, - uint32_t * dst, - const uint32_t * src, - const uint32_t * mask, - int width) -{ - core_combine_atop_u_sse2 (dst, src, mask, width); - _mm_empty (); -} - -static void -sse2_combine_atop_reverse_u (pixman_implementation_t *imp, - pixman_op_t op, - uint32_t * dst, - const uint32_t * src, - const uint32_t * mask, - int width) -{ - core_combine_reverse_atop_u_sse2 (dst, src, mask, width); - _mm_empty (); -} - -static void -sse2_combine_xor_u (pixman_implementation_t *imp, - pixman_op_t op, - uint32_t * dst, - const uint32_t * src, - const uint32_t * mask, - int width) -{ - core_combine_xor_u_sse2 (dst, src, mask, width); - _mm_empty (); -} - -static void -sse2_combine_add_u (pixman_implementation_t *imp, - pixman_op_t op, - uint32_t * dst, - const uint32_t * src, - const uint32_t * mask, - int width) -{ - core_combine_add_u_sse2 (dst, src, mask, width); - _mm_empty (); -} - -static void -sse2_combine_saturate_u (pixman_implementation_t *imp, - pixman_op_t op, - uint32_t * dst, - const uint32_t * src, - const uint32_t * mask, - int width) -{ - core_combine_saturate_u_sse2 (dst, src, mask, width); - _mm_empty (); -} - -static void -sse2_combine_src_ca (pixman_implementation_t *imp, - pixman_op_t op, - uint32_t * dst, - const uint32_t * src, - const uint32_t * mask, - int width) -{ - core_combine_src_ca_sse2 (dst, src, mask, width); - _mm_empty (); -} - -static void -sse2_combine_over_ca (pixman_implementation_t *imp, - pixman_op_t op, - uint32_t * dst, - const uint32_t * src, - const uint32_t * mask, - int width) -{ - core_combine_over_ca_sse2 (dst, src, mask, width); - _mm_empty (); -} - -static void -sse2_combine_over_reverse_ca (pixman_implementation_t *imp, - pixman_op_t op, - uint32_t * dst, - const uint32_t * src, - const uint32_t * mask, - int width) -{ - core_combine_over_reverse_ca_sse2 (dst, src, mask, width); - _mm_empty (); -} - -static void -sse2_combine_in_ca (pixman_implementation_t *imp, - pixman_op_t op, - uint32_t * dst, - const uint32_t * src, - const uint32_t * mask, - int width) -{ - core_combine_in_ca_sse2 (dst, src, mask, width); - _mm_empty (); -} - -static void -sse2_combine_in_reverse_ca (pixman_implementation_t *imp, - pixman_op_t op, - uint32_t * dst, - const uint32_t * src, - const uint32_t * mask, - int width) -{ - core_combine_in_reverse_ca_sse2 (dst, src, mask, width); - _mm_empty (); -} - -static void -sse2_combine_out_ca (pixman_implementation_t *imp, - pixman_op_t op, - uint32_t * dst, - const uint32_t * src, - const uint32_t * mask, - int width) -{ - core_combine_out_ca_sse2 (dst, src, mask, width); - _mm_empty (); -} - -static void -sse2_combine_out_reverse_ca (pixman_implementation_t *imp, - pixman_op_t op, - uint32_t * dst, - const uint32_t * src, - const uint32_t * mask, - int width) -{ - core_combine_out_reverse_ca_sse2 (dst, src, mask, width); - _mm_empty (); -} - -static void -sse2_combine_atop_ca (pixman_implementation_t *imp, - pixman_op_t op, - uint32_t * dst, - const uint32_t * src, - const uint32_t * mask, - int width) -{ - core_combine_atop_ca_sse2 (dst, src, mask, width); - _mm_empty (); -} - -static void -sse2_combine_atop_reverse_ca (pixman_implementation_t *imp, - pixman_op_t op, - uint32_t * dst, - const uint32_t * src, - const uint32_t * mask, - int width) -{ - core_combine_reverse_atop_ca_sse2 (dst, src, mask, width); - _mm_empty (); -} - -static void -sse2_combine_xor_ca (pixman_implementation_t *imp, - pixman_op_t op, - uint32_t * dst, - const uint32_t * src, - const uint32_t * mask, - int width) -{ - core_combine_xor_ca_sse2 (dst, src, mask, width); - _mm_empty (); -} - -static void -sse2_combine_add_ca (pixman_implementation_t *imp, - pixman_op_t op, - uint32_t * dst, - const uint32_t * src, - const uint32_t * mask, - int width) -{ - core_combine_add_ca_sse2 (dst, src, mask, width); - _mm_empty (); -} - -/* ------------------------------------------------------------------- - * composite_over_n_8888 - */ - -static void -sse2_composite_over_n_8888 (pixman_implementation_t *imp, - pixman_op_t op, - pixman_image_t * src_image, - pixman_image_t * mask_image, - pixman_image_t * dst_image, - int32_t src_x, - int32_t src_y, - int32_t mask_x, - int32_t mask_y, - int32_t dest_x, - int32_t dest_y, - int32_t width, - int32_t height) -{ - uint32_t src; - uint32_t *dst_line, *dst, d; - int32_t w; - int dst_stride; - __m128i xmm_src, xmm_alpha; - __m128i xmm_dst, xmm_dst_lo, xmm_dst_hi; - - src = _pixman_image_get_solid (src_image, dst_image->bits.format); - - if (src == 0) - return; - - PIXMAN_IMAGE_GET_LINE ( - dst_image, dest_x, dest_y, uint32_t, dst_stride, dst_line, 1); - - xmm_src = expand_pixel_32_1x128 (src); - xmm_alpha = expand_alpha_1x128 (xmm_src); - - while (height--) - { - dst = dst_line; - - /* call prefetch hint to optimize cache load*/ - cache_prefetch ((__m128i*)dst); - - dst_line += dst_stride; - w = width; - - while (w && (unsigned long)dst & 15) - { - d = *dst; - *dst++ = pack_1x64_32 (over_1x64 (_mm_movepi64_pi64 (xmm_src), - _mm_movepi64_pi64 (xmm_alpha), - unpack_32_1x64 (d))); - w--; - } - - cache_prefetch ((__m128i*)dst); - - while (w >= 4) - { - /* fill cache line with next memory */ - cache_prefetch_next ((__m128i*)dst); - - xmm_dst = load_128_aligned ((__m128i*)dst); - - unpack_128_2x128 (xmm_dst, &xmm_dst_lo, &xmm_dst_hi); - - over_2x128 (&xmm_src, &xmm_src, - &xmm_alpha, &xmm_alpha, - &xmm_dst_lo, &xmm_dst_hi); - - /* rebuid the 4 pixel data and save*/ - save_128_aligned ( - (__m128i*)dst, pack_2x128_128 (xmm_dst_lo, xmm_dst_hi)); - - w -= 4; - dst += 4; - } - - while (w) - { - d = *dst; - *dst++ = pack_1x64_32 (over_1x64 (_mm_movepi64_pi64 (xmm_src), - _mm_movepi64_pi64 (xmm_alpha), - unpack_32_1x64 (d))); - w--; - } - - } - _mm_empty (); -} - -/* --------------------------------------------------------------------- - * composite_over_n_0565 - */ -static void -sse2_composite_over_n_0565 (pixman_implementation_t *imp, - pixman_op_t op, - pixman_image_t * src_image, - pixman_image_t * mask_image, - pixman_image_t * dst_image, - int32_t src_x, - int32_t src_y, - int32_t mask_x, - int32_t mask_y, - int32_t dest_x, - int32_t dest_y, - int32_t width, - int32_t height) -{ - uint32_t src; - uint16_t *dst_line, *dst, d; - int32_t w; - int dst_stride; - __m128i xmm_src, xmm_alpha; - __m128i xmm_dst, xmm_dst0, xmm_dst1, xmm_dst2, xmm_dst3; - - src = _pixman_image_get_solid (src_image, dst_image->bits.format); - - if (src == 0) - return; - - PIXMAN_IMAGE_GET_LINE ( - dst_image, dest_x, dest_y, uint16_t, dst_stride, dst_line, 1); - - xmm_src = expand_pixel_32_1x128 (src); - xmm_alpha = expand_alpha_1x128 (xmm_src); - - while (height--) - { - dst = dst_line; - - /* call prefetch hint to optimize cache load*/ - cache_prefetch ((__m128i*)dst); - - dst_line += dst_stride; - w = width; - - while (w && (unsigned long)dst & 15) - { - d = *dst; - - *dst++ = pack_565_32_16 ( - pack_1x64_32 (over_1x64 (_mm_movepi64_pi64 (xmm_src), - _mm_movepi64_pi64 (xmm_alpha), - expand565_16_1x64 (d)))); - w--; - } - - /* call prefetch hint to optimize cache load*/ - cache_prefetch ((__m128i*)dst); - - while (w >= 8) - { - /* fill cache line with next memory */ - cache_prefetch_next ((__m128i*)dst); - - xmm_dst = load_128_aligned ((__m128i*)dst); - - unpack_565_128_4x128 (xmm_dst, - &xmm_dst0, &xmm_dst1, &xmm_dst2, &xmm_dst3); - - over_2x128 (&xmm_src, &xmm_src, - &xmm_alpha, &xmm_alpha, - &xmm_dst0, &xmm_dst1); - over_2x128 (&xmm_src, &xmm_src, - &xmm_alpha, &xmm_alpha, - &xmm_dst2, &xmm_dst3); - - xmm_dst = pack_565_4x128_128 ( - &xmm_dst0, &xmm_dst1, &xmm_dst2, &xmm_dst3); - - save_128_aligned ((__m128i*)dst, xmm_dst); - - dst += 8; - w -= 8; - } - - while (w--) - { - d = *dst; - *dst++ = pack_565_32_16 ( - pack_1x64_32 (over_1x64 (_mm_movepi64_pi64 (xmm_src), - _mm_movepi64_pi64 (xmm_alpha), - expand565_16_1x64 (d)))); - } - } - - _mm_empty (); -} - -/* ------------------------------ - * composite_add_n_8888_8888_ca - */ -static void -sse2_composite_add_n_8888_8888_ca (pixman_implementation_t *imp, - pixman_op_t op, - pixman_image_t * src_image, - pixman_image_t * mask_image, - pixman_image_t * dst_image, - int32_t src_x, - int32_t src_y, - int32_t mask_x, - int32_t mask_y, - int32_t dest_x, - int32_t dest_y, - int32_t width, - int32_t height) -{ - uint32_t src, srca; - uint32_t *dst_line, d; - uint32_t *mask_line, m; - uint32_t pack_cmp; - int dst_stride, mask_stride; - - __m128i xmm_src, xmm_alpha; - __m128i xmm_dst; - __m128i xmm_mask, xmm_mask_lo, xmm_mask_hi; - - __m64 mmx_src, mmx_alpha, mmx_mask, mmx_dest; - - src = _pixman_image_get_solid (src_image, dst_image->bits.format); - srca = src >> 24; - - if (src == 0) - return; - - PIXMAN_IMAGE_GET_LINE ( - dst_image, dest_x, dest_y, uint32_t, dst_stride, dst_line, 1); - PIXMAN_IMAGE_GET_LINE ( - mask_image, mask_x, mask_y, uint32_t, mask_stride, mask_line, 1); - - xmm_src = _mm_unpacklo_epi8 ( - create_mask_2x32_128 (src, src), _mm_setzero_si128 ()); - xmm_alpha = expand_alpha_1x128 (xmm_src); - mmx_src = _mm_movepi64_pi64 (xmm_src); - mmx_alpha = _mm_movepi64_pi64 (xmm_alpha); - - while (height--) - { - int w = width; - const uint32_t *pm = (uint32_t *)mask_line; - uint32_t *pd = (uint32_t *)dst_line; - - dst_line += dst_stride; - mask_line += mask_stride; - - /* call prefetch hint to optimize cache load*/ - cache_prefetch ((__m128i*)pd); - cache_prefetch ((__m128i*)pm); - - while (w && (unsigned long)pd & 15) - { - m = *pm++; - - if (m) - { - d = *pd; - - mmx_mask = unpack_32_1x64 (m); - mmx_dest = unpack_32_1x64 (d); - - *pd = pack_1x64_32 ( - _mm_adds_pu8 (pix_multiply_1x64 (mmx_mask, mmx_src), mmx_dest)); - } - - pd++; - w--; - } - - /* call prefetch hint to optimize cache load*/ - cache_prefetch ((__m128i*)pd); - cache_prefetch ((__m128i*)pm); - - while (w >= 4) - { - /* fill cache line with next memory */ - cache_prefetch_next ((__m128i*)pd); - cache_prefetch_next ((__m128i*)pm); - - xmm_mask = load_128_unaligned ((__m128i*)pm); - - pack_cmp = - _mm_movemask_epi8 ( - _mm_cmpeq_epi32 (xmm_mask, _mm_setzero_si128 ())); - - /* if all bits in mask are zero, pack_cmp are equal to 0xffff */ - if (pack_cmp != 0xffff) - { - xmm_dst = load_128_aligned ((__m128i*)pd); - - unpack_128_2x128 (xmm_mask, &xmm_mask_lo, &xmm_mask_hi); - - pix_multiply_2x128 (&xmm_src, &xmm_src, - &xmm_mask_lo, &xmm_mask_hi, - &xmm_mask_lo, &xmm_mask_hi); - xmm_mask_hi = pack_2x128_128 (xmm_mask_lo, xmm_mask_hi); - - save_128_aligned ( - (__m128i*)pd, _mm_adds_epu8 (xmm_mask_hi, xmm_dst)); - } - - pd += 4; - pm += 4; - w -= 4; - } - - while (w) - { - m = *pm++; - - if (m) - { - d = *pd; - - mmx_mask = unpack_32_1x64 (m); - mmx_dest = unpack_32_1x64 (d); - - *pd = pack_1x64_32 ( - _mm_adds_pu8 (pix_multiply_1x64 (mmx_mask, mmx_src), mmx_dest)); - } - - pd++; - w--; - } - } - - _mm_empty (); -} - -/* --------------------------------------------------------------------------- - * composite_over_n_8888_8888_ca - */ - -static void -sse2_composite_over_n_8888_8888_ca (pixman_implementation_t *imp, - pixman_op_t op, - pixman_image_t * src_image, - pixman_image_t * mask_image, - pixman_image_t * dst_image, - int32_t src_x, - int32_t src_y, - int32_t mask_x, - int32_t mask_y, - int32_t dest_x, - int32_t dest_y, - int32_t width, - int32_t height) -{ - uint32_t src; - uint32_t *dst_line, d; - uint32_t *mask_line, m; - uint32_t pack_cmp; - int dst_stride, mask_stride; - - __m128i xmm_src, xmm_alpha; - __m128i xmm_dst, xmm_dst_lo, xmm_dst_hi; - __m128i xmm_mask, xmm_mask_lo, xmm_mask_hi; - - __m64 mmx_src, mmx_alpha, mmx_mask, mmx_dest; - - src = _pixman_image_get_solid (src_image, dst_image->bits.format); - - if (src == 0) - return; - - PIXMAN_IMAGE_GET_LINE ( - dst_image, dest_x, dest_y, uint32_t, dst_stride, dst_line, 1); - PIXMAN_IMAGE_GET_LINE ( - mask_image, mask_x, mask_y, uint32_t, mask_stride, mask_line, 1); - - xmm_src = _mm_unpacklo_epi8 ( - create_mask_2x32_128 (src, src), _mm_setzero_si128 ()); - xmm_alpha = expand_alpha_1x128 (xmm_src); - mmx_src = _mm_movepi64_pi64 (xmm_src); - mmx_alpha = _mm_movepi64_pi64 (xmm_alpha); - - while (height--) - { - int w = width; - const uint32_t *pm = (uint32_t *)mask_line; - uint32_t *pd = (uint32_t *)dst_line; - - dst_line += dst_stride; - mask_line += mask_stride; - - /* call prefetch hint to optimize cache load*/ - cache_prefetch ((__m128i*)pd); - cache_prefetch ((__m128i*)pm); - - while (w && (unsigned long)pd & 15) - { - m = *pm++; - - if (m) - { - d = *pd; - mmx_mask = unpack_32_1x64 (m); - mmx_dest = unpack_32_1x64 (d); - - *pd = pack_1x64_32 (in_over_1x64 (&mmx_src, - &mmx_alpha, - &mmx_mask, - &mmx_dest)); - } - - pd++; - w--; - } - - /* call prefetch hint to optimize cache load*/ - cache_prefetch ((__m128i*)pd); - cache_prefetch ((__m128i*)pm); - - while (w >= 4) - { - /* fill cache line with next memory */ - cache_prefetch_next ((__m128i*)pd); - cache_prefetch_next ((__m128i*)pm); - - xmm_mask = load_128_unaligned ((__m128i*)pm); - - pack_cmp = - _mm_movemask_epi8 ( - _mm_cmpeq_epi32 (xmm_mask, _mm_setzero_si128 ())); - - /* if all bits in mask are zero, pack_cmp are equal to 0xffff */ - if (pack_cmp != 0xffff) - { - xmm_dst = load_128_aligned ((__m128i*)pd); - - unpack_128_2x128 (xmm_mask, &xmm_mask_lo, &xmm_mask_hi); - unpack_128_2x128 (xmm_dst, &xmm_dst_lo, &xmm_dst_hi); - - in_over_2x128 (&xmm_src, &xmm_src, - &xmm_alpha, &xmm_alpha, - &xmm_mask_lo, &xmm_mask_hi, - &xmm_dst_lo, &xmm_dst_hi); - - save_128_aligned ( - (__m128i*)pd, pack_2x128_128 (xmm_dst_lo, xmm_dst_hi)); - } - - pd += 4; - pm += 4; - w -= 4; - } - - while (w) - { - m = *pm++; - - if (m) - { - d = *pd; - mmx_mask = unpack_32_1x64 (m); - mmx_dest = unpack_32_1x64 (d); - - *pd = pack_1x64_32 ( - in_over_1x64 (&mmx_src, &mmx_alpha, &mmx_mask, &mmx_dest)); - } - - pd++; - w--; - } - } - - _mm_empty (); -} - -/*--------------------------------------------------------------------- - * composite_over_8888_n_8888 - */ - -static void -sse2_composite_over_8888_n_8888 (pixman_implementation_t *imp, - pixman_op_t op, - pixman_image_t * src_image, - pixman_image_t * mask_image, - pixman_image_t * dst_image, - int32_t src_x, - int32_t src_y, - int32_t mask_x, - int32_t mask_y, - int32_t dest_x, - int32_t dest_y, - int32_t width, - int32_t height) -{ - uint32_t *dst_line, *dst; - uint32_t *src_line, *src; - uint32_t mask; - int32_t w; - int dst_stride, src_stride; - - __m128i xmm_mask; - __m128i xmm_src, xmm_src_lo, xmm_src_hi; - __m128i xmm_dst, xmm_dst_lo, xmm_dst_hi; - __m128i xmm_alpha_lo, xmm_alpha_hi; - - PIXMAN_IMAGE_GET_LINE ( - dst_image, dest_x, dest_y, uint32_t, dst_stride, dst_line, 1); - PIXMAN_IMAGE_GET_LINE ( - src_image, src_x, src_y, uint32_t, src_stride, src_line, 1); - - mask = _pixman_image_get_solid (mask_image, PIXMAN_a8r8g8b8); - - xmm_mask = create_mask_16_128 (mask >> 24); - - while (height--) - { - dst = dst_line; - dst_line += dst_stride; - src = src_line; - src_line += src_stride; - w = width; - - /* call prefetch hint to optimize cache load*/ - cache_prefetch ((__m128i*)dst); - cache_prefetch ((__m128i*)src); - - while (w && (unsigned long)dst & 15) - { - uint32_t s = *src++; - uint32_t d = *dst; - - __m64 ms = unpack_32_1x64 (s); - __m64 alpha = expand_alpha_1x64 (ms); - __m64 dest = _mm_movepi64_pi64 (xmm_mask); - __m64 alpha_dst = unpack_32_1x64 (d); - - *dst++ = pack_1x64_32 ( - in_over_1x64 (&ms, &alpha, &dest, &alpha_dst)); - - w--; - } - - /* call prefetch hint to optimize cache load*/ - cache_prefetch ((__m128i*)dst); - cache_prefetch ((__m128i*)src); - - while (w >= 4) - { - /* fill cache line with next memory */ - cache_prefetch_next ((__m128i*)dst); - cache_prefetch_next ((__m128i*)src); - - xmm_src = load_128_unaligned ((__m128i*)src); - xmm_dst = load_128_aligned ((__m128i*)dst); - - unpack_128_2x128 (xmm_src, &xmm_src_lo, &xmm_src_hi); - unpack_128_2x128 (xmm_dst, &xmm_dst_lo, &xmm_dst_hi); - expand_alpha_2x128 (xmm_src_lo, xmm_src_hi, - &xmm_alpha_lo, &xmm_alpha_hi); - - in_over_2x128 (&xmm_src_lo, &xmm_src_hi, - &xmm_alpha_lo, &xmm_alpha_hi, - &xmm_mask, &xmm_mask, - &xmm_dst_lo, &xmm_dst_hi); - - save_128_aligned ( - (__m128i*)dst, pack_2x128_128 (xmm_dst_lo, xmm_dst_hi)); - - dst += 4; - src += 4; - w -= 4; - } - - while (w) - { - uint32_t s = *src++; - uint32_t d = *dst; - - __m64 ms = unpack_32_1x64 (s); - __m64 alpha = expand_alpha_1x64 (ms); - __m64 mask = _mm_movepi64_pi64 (xmm_mask); - __m64 dest = unpack_32_1x64 (d); - - *dst++ = pack_1x64_32 ( - in_over_1x64 (&ms, &alpha, &mask, &dest)); - - w--; - } - } - - _mm_empty (); -} - -/* --------------------------------------------------------------------- - * composite_over_x888_n_8888 - */ -static void -sse2_composite_over_x888_n_8888 (pixman_implementation_t *imp, - pixman_op_t op, - pixman_image_t * src_image, - pixman_image_t * mask_image, - pixman_image_t * dst_image, - int32_t src_x, - int32_t src_y, - int32_t mask_x, - int32_t mask_y, - int32_t dest_x, - int32_t dest_y, - int32_t width, - int32_t height) -{ - uint32_t *dst_line, *dst; - uint32_t *src_line, *src; - uint32_t mask; - int dst_stride, src_stride; - int32_t w; - - __m128i xmm_mask, xmm_alpha; - __m128i xmm_src, xmm_src_lo, xmm_src_hi; - __m128i xmm_dst, xmm_dst_lo, xmm_dst_hi; - - PIXMAN_IMAGE_GET_LINE ( - dst_image, dest_x, dest_y, uint32_t, dst_stride, dst_line, 1); - PIXMAN_IMAGE_GET_LINE ( - src_image, src_x, src_y, uint32_t, src_stride, src_line, 1); - - mask = _pixman_image_get_solid (mask_image, PIXMAN_a8r8g8b8); - - xmm_mask = create_mask_16_128 (mask >> 24); - xmm_alpha = mask_00ff; - - while (height--) - { - dst = dst_line; - dst_line += dst_stride; - src = src_line; - src_line += src_stride; - w = width; - - /* call prefetch hint to optimize cache load*/ - cache_prefetch ((__m128i*)dst); - cache_prefetch ((__m128i*)src); - - while (w && (unsigned long)dst & 15) - { - uint32_t s = (*src++) | 0xff000000; - uint32_t d = *dst; - - __m64 src = unpack_32_1x64 (s); - __m64 alpha = _mm_movepi64_pi64 (xmm_alpha); - __m64 mask = _mm_movepi64_pi64 (xmm_mask); - __m64 dest = unpack_32_1x64 (d); - - *dst++ = pack_1x64_32 ( - in_over_1x64 (&src, &alpha, &mask, &dest)); - - w--; - } - - /* call prefetch hint to optimize cache load*/ - cache_prefetch ((__m128i*)dst); - cache_prefetch ((__m128i*)src); - - while (w >= 4) - { - /* fill cache line with next memory */ - cache_prefetch_next ((__m128i*)dst); - cache_prefetch_next ((__m128i*)src); - - xmm_src = _mm_or_si128 ( - load_128_unaligned ((__m128i*)src), mask_ff000000); - xmm_dst = load_128_aligned ((__m128i*)dst); - - unpack_128_2x128 (xmm_src, &xmm_src_lo, &xmm_src_hi); - unpack_128_2x128 (xmm_dst, &xmm_dst_lo, &xmm_dst_hi); - - in_over_2x128 (&xmm_src_lo, &xmm_src_hi, - &xmm_alpha, &xmm_alpha, - &xmm_mask, &xmm_mask, - &xmm_dst_lo, &xmm_dst_hi); - - save_128_aligned ( - (__m128i*)dst, pack_2x128_128 (xmm_dst_lo, xmm_dst_hi)); - - dst += 4; - src += 4; - w -= 4; - - } - - while (w) - { - uint32_t s = (*src++) | 0xff000000; - uint32_t d = *dst; - - __m64 src = unpack_32_1x64 (s); - __m64 alpha = _mm_movepi64_pi64 (xmm_alpha); - __m64 mask = _mm_movepi64_pi64 (xmm_mask); - __m64 dest = unpack_32_1x64 (d); - - *dst++ = pack_1x64_32 ( - in_over_1x64 (&src, &alpha, &mask, &dest)); - - w--; - } - } - - _mm_empty (); -} - -/* -------------------------------------------------------------------- - * composite_over_8888_8888 - */ -static void -sse2_composite_over_8888_8888 (pixman_implementation_t *imp, - pixman_op_t op, - pixman_image_t * src_image, - pixman_image_t * mask_image, - pixman_image_t * dst_image, - int32_t src_x, - int32_t src_y, - int32_t mask_x, - int32_t mask_y, - int32_t dest_x, - int32_t dest_y, - int32_t width, - int32_t height) -{ - int dst_stride, src_stride; - uint32_t *dst_line, *dst; - uint32_t *src_line, *src; - - PIXMAN_IMAGE_GET_LINE ( - dst_image, dest_x, dest_y, uint32_t, dst_stride, dst_line, 1); - PIXMAN_IMAGE_GET_LINE ( - src_image, src_x, src_y, uint32_t, src_stride, src_line, 1); - - dst = dst_line; - src = src_line; - - while (height--) - { - core_combine_over_u_sse2 (dst, src, NULL, width); - - dst += dst_stride; - src += src_stride; - } - _mm_empty (); -} - -/* ------------------------------------------------------------------ - * composite_over_8888_0565 - */ -static force_inline uint16_t -composite_over_8888_0565pixel (uint32_t src, uint16_t dst) -{ - __m64 ms; - - ms = unpack_32_1x64 (src); - return pack_565_32_16 ( - pack_1x64_32 ( - over_1x64 ( - ms, expand_alpha_1x64 (ms), expand565_16_1x64 (dst)))); -} - -static void -sse2_composite_over_8888_0565 (pixman_implementation_t *imp, - pixman_op_t op, - pixman_image_t * src_image, - pixman_image_t * mask_image, - pixman_image_t * dst_image, - int32_t src_x, - int32_t src_y, - int32_t mask_x, - int32_t mask_y, - int32_t dest_x, - int32_t dest_y, - int32_t width, - int32_t height) -{ - uint16_t *dst_line, *dst, d; - uint32_t *src_line, *src, s; - int dst_stride, src_stride; - int32_t w; - - __m128i xmm_alpha_lo, xmm_alpha_hi; - __m128i xmm_src, xmm_src_lo, xmm_src_hi; - __m128i xmm_dst, xmm_dst0, xmm_dst1, xmm_dst2, xmm_dst3; - - PIXMAN_IMAGE_GET_LINE ( - dst_image, dest_x, dest_y, uint16_t, dst_stride, dst_line, 1); - PIXMAN_IMAGE_GET_LINE ( - src_image, src_x, src_y, uint32_t, src_stride, src_line, 1); - -#if 0 - /* FIXME - * - * I copy the code from MMX one and keep the fixme. - * If it's a problem there, probably is a problem here. - */ - assert (src_image->drawable == mask_image->drawable); -#endif - - while (height--) - { - dst = dst_line; - src = src_line; - - /* call prefetch hint to optimize cache load*/ - cache_prefetch ((__m128i*)src); - cache_prefetch ((__m128i*)dst); - - dst_line += dst_stride; - src_line += src_stride; - w = width; - - /* Align dst on a 16-byte boundary */ - while (w && - ((unsigned long)dst & 15)) - { - s = *src++; - d = *dst; - - *dst++ = composite_over_8888_0565pixel (s, d); - w--; - } - - /* call prefetch hint to optimize cache load*/ - cache_prefetch ((__m128i*)src); - cache_prefetch ((__m128i*)dst); - - /* It's a 8 pixel loop */ - while (w >= 8) - { - /* fill cache line with next memory */ - cache_prefetch_next ((__m128i*)src); - cache_prefetch_next ((__m128i*)dst); - - /* I'm loading unaligned because I'm not sure - * about the address alignment. - */ - xmm_src = load_128_unaligned ((__m128i*) src); - xmm_dst = load_128_aligned ((__m128i*) dst); - - /* Unpacking */ - unpack_128_2x128 (xmm_src, &xmm_src_lo, &xmm_src_hi); - unpack_565_128_4x128 (xmm_dst, - &xmm_dst0, &xmm_dst1, &xmm_dst2, &xmm_dst3); - expand_alpha_2x128 (xmm_src_lo, xmm_src_hi, - &xmm_alpha_lo, &xmm_alpha_hi); - - /* I'm loading next 4 pixels from memory - * before to optimze the memory read. - */ - xmm_src = load_128_unaligned ((__m128i*) (src + 4)); - - over_2x128 (&xmm_src_lo, &xmm_src_hi, - &xmm_alpha_lo, &xmm_alpha_hi, - &xmm_dst0, &xmm_dst1); - - /* Unpacking */ - unpack_128_2x128 (xmm_src, &xmm_src_lo, &xmm_src_hi); - expand_alpha_2x128 (xmm_src_lo, xmm_src_hi, - &xmm_alpha_lo, &xmm_alpha_hi); - - over_2x128 (&xmm_src_lo, &xmm_src_hi, - &xmm_alpha_lo, &xmm_alpha_hi, - &xmm_dst2, &xmm_dst3); - - save_128_aligned ( - (__m128i*)dst, pack_565_4x128_128 ( - &xmm_dst0, &xmm_dst1, &xmm_dst2, &xmm_dst3)); - - w -= 8; - dst += 8; - src += 8; - } - - while (w--) - { - s = *src++; - d = *dst; - - *dst++ = composite_over_8888_0565pixel (s, d); - } - } - - _mm_empty (); -} - -/* ----------------------------------------------------------------- - * composite_over_n_8_8888 - */ - -static void -sse2_composite_over_n_8_8888 (pixman_implementation_t *imp, - pixman_op_t op, - pixman_image_t * src_image, - pixman_image_t * mask_image, - pixman_image_t * dst_image, - int32_t src_x, - int32_t src_y, - int32_t mask_x, - int32_t mask_y, - int32_t dest_x, - int32_t dest_y, - int32_t width, - int32_t height) -{ - uint32_t src, srca; - uint32_t *dst_line, *dst; - uint8_t *mask_line, *mask; - int dst_stride, mask_stride; - int32_t w; - uint32_t m, d; - - __m128i xmm_src, xmm_alpha, xmm_def; - __m128i xmm_dst, xmm_dst_lo, xmm_dst_hi; - __m128i xmm_mask, xmm_mask_lo, xmm_mask_hi; - - __m64 mmx_src, mmx_alpha, mmx_mask, mmx_dest; - - src = _pixman_image_get_solid (src_image, dst_image->bits.format); - - srca = src >> 24; - if (src == 0) - return; - - PIXMAN_IMAGE_GET_LINE ( - dst_image, dest_x, dest_y, uint32_t, dst_stride, dst_line, 1); - PIXMAN_IMAGE_GET_LINE ( - mask_image, mask_x, mask_y, uint8_t, mask_stride, mask_line, 1); - - xmm_def = create_mask_2x32_128 (src, src); - xmm_src = expand_pixel_32_1x128 (src); - xmm_alpha = expand_alpha_1x128 (xmm_src); - mmx_src = _mm_movepi64_pi64 (xmm_src); - mmx_alpha = _mm_movepi64_pi64 (xmm_alpha); - - while (height--) - { - dst = dst_line; - dst_line += dst_stride; - mask = mask_line; - mask_line += mask_stride; - w = width; - - /* call prefetch hint to optimize cache load*/ - cache_prefetch ((__m128i*)mask); - cache_prefetch ((__m128i*)dst); - - while (w && (unsigned long)dst & 15) - { - uint8_t m = *mask++; - - if (m) - { - d = *dst; - mmx_mask = expand_pixel_8_1x64 (m); - mmx_dest = unpack_32_1x64 (d); - - *dst = pack_1x64_32 (in_over_1x64 (&mmx_src, - &mmx_alpha, - &mmx_mask, - &mmx_dest)); - } - - w--; - dst++; - } - - /* call prefetch hint to optimize cache load*/ - cache_prefetch ((__m128i*)mask); - cache_prefetch ((__m128i*)dst); - - while (w >= 4) - { - /* fill cache line with next memory */ - cache_prefetch_next ((__m128i*)mask); - cache_prefetch_next ((__m128i*)dst); - - m = *((uint32_t*)mask); - - if (srca == 0xff && m == 0xffffffff) - { - save_128_aligned ((__m128i*)dst, xmm_def); - } - else if (m) - { - xmm_dst = load_128_aligned ((__m128i*) dst); - xmm_mask = unpack_32_1x128 (m); - xmm_mask = _mm_unpacklo_epi8 (xmm_mask, _mm_setzero_si128 ()); - - /* Unpacking */ - unpack_128_2x128 (xmm_dst, &xmm_dst_lo, &xmm_dst_hi); - unpack_128_2x128 (xmm_mask, &xmm_mask_lo, &xmm_mask_hi); - - expand_alpha_rev_2x128 (xmm_mask_lo, xmm_mask_hi, - &xmm_mask_lo, &xmm_mask_hi); - - in_over_2x128 (&xmm_src, &xmm_src, - &xmm_alpha, &xmm_alpha, - &xmm_mask_lo, &xmm_mask_hi, - &xmm_dst_lo, &xmm_dst_hi); - - save_128_aligned ( - (__m128i*)dst, pack_2x128_128 (xmm_dst_lo, xmm_dst_hi)); - } - - w -= 4; - dst += 4; - mask += 4; - } - - while (w) - { - uint8_t m = *mask++; - - if (m) - { - d = *dst; - mmx_mask = expand_pixel_8_1x64 (m); - mmx_dest = unpack_32_1x64 (d); - - *dst = pack_1x64_32 (in_over_1x64 (&mmx_src, - &mmx_alpha, - &mmx_mask, - &mmx_dest)); - } - - w--; - dst++; - } - } - - _mm_empty (); -} - -/* ---------------------------------------------------------------- - * composite_over_n_8_8888 - */ - -pixman_bool_t -pixman_fill_sse2 (uint32_t *bits, - int stride, - int bpp, - int x, - int y, - int width, - int height, - uint32_t data) -{ - uint32_t byte_width; - uint8_t *byte_line; - - __m128i xmm_def; - - if (bpp != 16 && bpp != 32) - return FALSE; - - if (bpp == 16) - { - stride = stride * (int) sizeof (uint32_t) / 2; - byte_line = (uint8_t *)(((uint16_t *)bits) + stride * y + x); - byte_width = 2 * width; - stride *= 2; - data = (data & 0xffff) * 0x00010001; - } - else - { - stride = stride * (int) sizeof (uint32_t) / 4; - byte_line = (uint8_t *)(((uint32_t *)bits) + stride * y + x); - byte_width = 4 * width; - stride *= 4; - } - - cache_prefetch ((__m128i*)byte_line); - xmm_def = create_mask_2x32_128 (data, data); - - while (height--) - { - int w; - uint8_t *d = byte_line; - byte_line += stride; - w = byte_width; - - - cache_prefetch_next ((__m128i*)d); - - while (w >= 2 && ((unsigned long)d & 3)) - { - *(uint16_t *)d = data; - w -= 2; - d += 2; - } - - while (w >= 4 && ((unsigned long)d & 15)) - { - *(uint32_t *)d = data; - - w -= 4; - d += 4; - } - - cache_prefetch_next ((__m128i*)d); - - while (w >= 128) - { - cache_prefetch (((__m128i*)d) + 12); - - save_128_aligned ((__m128i*)(d), xmm_def); - save_128_aligned ((__m128i*)(d + 16), xmm_def); - save_128_aligned ((__m128i*)(d + 32), xmm_def); - save_128_aligned ((__m128i*)(d + 48), xmm_def); - save_128_aligned ((__m128i*)(d + 64), xmm_def); - save_128_aligned ((__m128i*)(d + 80), xmm_def); - save_128_aligned ((__m128i*)(d + 96), xmm_def); - save_128_aligned ((__m128i*)(d + 112), xmm_def); - - d += 128; - w -= 128; - } - - if (w >= 64) - { - cache_prefetch (((__m128i*)d) + 8); - - save_128_aligned ((__m128i*)(d), xmm_def); - save_128_aligned ((__m128i*)(d + 16), xmm_def); - save_128_aligned ((__m128i*)(d + 32), xmm_def); - save_128_aligned ((__m128i*)(d + 48), xmm_def); - - d += 64; - w -= 64; - } - - cache_prefetch_next ((__m128i*)d); - - if (w >= 32) - { - save_128_aligned ((__m128i*)(d), xmm_def); - save_128_aligned ((__m128i*)(d + 16), xmm_def); - - d += 32; - w -= 32; - } - - if (w >= 16) - { - save_128_aligned ((__m128i*)(d), xmm_def); - - d += 16; - w -= 16; - } - - cache_prefetch_next ((__m128i*)d); - - while (w >= 4) - { - *(uint32_t *)d = data; - - w -= 4; - d += 4; - } - - if (w >= 2) - { - *(uint16_t *)d = data; - w -= 2; - d += 2; - } - } - - _mm_empty (); - return TRUE; -} - -static void -sse2_composite_src_n_8_8888 (pixman_implementation_t *imp, - pixman_op_t op, - pixman_image_t * src_image, - pixman_image_t * mask_image, - pixman_image_t * dst_image, - int32_t src_x, - int32_t src_y, - int32_t mask_x, - int32_t mask_y, - int32_t dest_x, - int32_t dest_y, - int32_t width, - int32_t height) -{ - uint32_t src, srca; - uint32_t *dst_line, *dst; - uint8_t *mask_line, *mask; - int dst_stride, mask_stride; - int32_t w; - uint32_t m; - - __m128i xmm_src, xmm_def; - __m128i xmm_mask, xmm_mask_lo, xmm_mask_hi; - - src = _pixman_image_get_solid (src_image, dst_image->bits.format); - - srca = src >> 24; - if (src == 0) - { - pixman_fill_sse2 (dst_image->bits.bits, dst_image->bits.rowstride, - PIXMAN_FORMAT_BPP (dst_image->bits.format), - dest_x, dest_y, width, height, 0); - return; - } - - PIXMAN_IMAGE_GET_LINE ( - dst_image, dest_x, dest_y, uint32_t, dst_stride, dst_line, 1); - PIXMAN_IMAGE_GET_LINE ( - mask_image, mask_x, mask_y, uint8_t, mask_stride, mask_line, 1); - - xmm_def = create_mask_2x32_128 (src, src); - xmm_src = expand_pixel_32_1x128 (src); - - while (height--) - { - dst = dst_line; - dst_line += dst_stride; - mask = mask_line; - mask_line += mask_stride; - w = width; - - /* call prefetch hint to optimize cache load*/ - cache_prefetch ((__m128i*)mask); - cache_prefetch ((__m128i*)dst); - - while (w && (unsigned long)dst & 15) - { - uint8_t m = *mask++; - - if (m) - { - *dst = pack_1x64_32 ( - pix_multiply_1x64 ( - _mm_movepi64_pi64 (xmm_src), expand_pixel_8_1x64 (m))); - } - else - { - *dst = 0; - } - - w--; - dst++; - } - - /* call prefetch hint to optimize cache load*/ - cache_prefetch ((__m128i*)mask); - cache_prefetch ((__m128i*)dst); - - while (w >= 4) - { - /* fill cache line with next memory */ - cache_prefetch_next ((__m128i*)mask); - cache_prefetch_next ((__m128i*)dst); - - m = *((uint32_t*)mask); - - if (srca == 0xff && m == 0xffffffff) - { - save_128_aligned ((__m128i*)dst, xmm_def); - } - else if (m) - { - xmm_mask = unpack_32_1x128 (m); - xmm_mask = _mm_unpacklo_epi8 (xmm_mask, _mm_setzero_si128 ()); - - /* Unpacking */ - unpack_128_2x128 (xmm_mask, &xmm_mask_lo, &xmm_mask_hi); - - expand_alpha_rev_2x128 (xmm_mask_lo, xmm_mask_hi, - &xmm_mask_lo, &xmm_mask_hi); - - pix_multiply_2x128 (&xmm_src, &xmm_src, - &xmm_mask_lo, &xmm_mask_hi, - &xmm_mask_lo, &xmm_mask_hi); - - save_128_aligned ( - (__m128i*)dst, pack_2x128_128 (xmm_mask_lo, xmm_mask_hi)); - } - else - { - save_128_aligned ((__m128i*)dst, _mm_setzero_si128 ()); - } - - w -= 4; - dst += 4; - mask += 4; - } - - while (w) - { - uint8_t m = *mask++; - - if (m) - { - *dst = pack_1x64_32 ( - pix_multiply_1x64 ( - _mm_movepi64_pi64 (xmm_src), expand_pixel_8_1x64 (m))); - } - else - { - *dst = 0; - } - - w--; - dst++; - } - } - - _mm_empty (); -} - -/*----------------------------------------------------------------------- - * composite_over_n_8_0565 - */ - -static void -sse2_composite_over_n_8_0565 (pixman_implementation_t *imp, - pixman_op_t op, - pixman_image_t * src_image, - pixman_image_t * mask_image, - pixman_image_t * dst_image, - int32_t src_x, - int32_t src_y, - int32_t mask_x, - int32_t mask_y, - int32_t dest_x, - int32_t dest_y, - int32_t width, - int32_t height) -{ - uint32_t src, srca; - uint16_t *dst_line, *dst, d; - uint8_t *mask_line, *mask; - int dst_stride, mask_stride; - int32_t w; - uint32_t m; - __m64 mmx_src, mmx_alpha, mmx_mask, mmx_dest; - - __m128i xmm_src, xmm_alpha; - __m128i xmm_mask, xmm_mask_lo, xmm_mask_hi; - __m128i xmm_dst, xmm_dst0, xmm_dst1, xmm_dst2, xmm_dst3; - - src = _pixman_image_get_solid (src_image, dst_image->bits.format); - - srca = src >> 24; - if (src == 0) - return; - - PIXMAN_IMAGE_GET_LINE ( - dst_image, dest_x, dest_y, uint16_t, dst_stride, dst_line, 1); - PIXMAN_IMAGE_GET_LINE ( - mask_image, mask_x, mask_y, uint8_t, mask_stride, mask_line, 1); - - xmm_src = expand_pixel_32_1x128 (src); - xmm_alpha = expand_alpha_1x128 (xmm_src); - mmx_src = _mm_movepi64_pi64 (xmm_src); - mmx_alpha = _mm_movepi64_pi64 (xmm_alpha); - - while (height--) - { - dst = dst_line; - dst_line += dst_stride; - mask = mask_line; - mask_line += mask_stride; - w = width; - - /* call prefetch hint to optimize cache load*/ - cache_prefetch ((__m128i*)mask); - cache_prefetch ((__m128i*)dst); - - while (w && (unsigned long)dst & 15) - { - m = *mask++; - - if (m) - { - d = *dst; - mmx_mask = expand_alpha_rev_1x64 (unpack_32_1x64 (m)); - mmx_dest = expand565_16_1x64 (d); - - *dst = pack_565_32_16 ( - pack_1x64_32 ( - in_over_1x64 ( - &mmx_src, &mmx_alpha, &mmx_mask, &mmx_dest))); - } - - w--; - dst++; - } - - /* call prefetch hint to optimize cache load*/ - cache_prefetch ((__m128i*)mask); - cache_prefetch ((__m128i*)dst); - - while (w >= 8) - { - /* fill cache line with next memory */ - cache_prefetch_next ((__m128i*)mask); - cache_prefetch_next ((__m128i*)dst); - - xmm_dst = load_128_aligned ((__m128i*) dst); - unpack_565_128_4x128 (xmm_dst, - &xmm_dst0, &xmm_dst1, &xmm_dst2, &xmm_dst3); - - m = *((uint32_t*)mask); - mask += 4; - - if (m) - { - xmm_mask = unpack_32_1x128 (m); - xmm_mask = _mm_unpacklo_epi8 (xmm_mask, _mm_setzero_si128 ()); - - /* Unpacking */ - unpack_128_2x128 (xmm_mask, &xmm_mask_lo, &xmm_mask_hi); - - expand_alpha_rev_2x128 (xmm_mask_lo, xmm_mask_hi, - &xmm_mask_lo, &xmm_mask_hi); - - in_over_2x128 (&xmm_src, &xmm_src, - &xmm_alpha, &xmm_alpha, - &xmm_mask_lo, &xmm_mask_hi, - &xmm_dst0, &xmm_dst1); - } - - m = *((uint32_t*)mask); - mask += 4; - - if (m) - { - xmm_mask = unpack_32_1x128 (m); - xmm_mask = _mm_unpacklo_epi8 (xmm_mask, _mm_setzero_si128 ()); - - /* Unpacking */ - unpack_128_2x128 (xmm_mask, &xmm_mask_lo, &xmm_mask_hi); - - expand_alpha_rev_2x128 (xmm_mask_lo, xmm_mask_hi, - &xmm_mask_lo, &xmm_mask_hi); - in_over_2x128 (&xmm_src, &xmm_src, - &xmm_alpha, &xmm_alpha, - &xmm_mask_lo, &xmm_mask_hi, - &xmm_dst2, &xmm_dst3); - } - - save_128_aligned ( - (__m128i*)dst, pack_565_4x128_128 ( - &xmm_dst0, &xmm_dst1, &xmm_dst2, &xmm_dst3)); - - w -= 8; - dst += 8; - } - - while (w) - { - m = *mask++; - - if (m) - { - d = *dst; - mmx_mask = expand_alpha_rev_1x64 (unpack_32_1x64 (m)); - mmx_dest = expand565_16_1x64 (d); - - *dst = pack_565_32_16 ( - pack_1x64_32 ( - in_over_1x64 ( - &mmx_src, &mmx_alpha, &mmx_mask, &mmx_dest))); - } - - w--; - dst++; - } - } - - _mm_empty (); -} - -/* ----------------------------------------------------------------------- - * composite_over_pixbuf_0565 - */ - -static void -sse2_composite_over_pixbuf_0565 (pixman_implementation_t *imp, - pixman_op_t op, - pixman_image_t * src_image, - pixman_image_t * mask_image, - pixman_image_t * dst_image, - int32_t src_x, - int32_t src_y, - int32_t mask_x, - int32_t mask_y, - int32_t dest_x, - int32_t dest_y, - int32_t width, - int32_t height) -{ - uint16_t *dst_line, *dst, d; - uint32_t *src_line, *src, s; - int dst_stride, src_stride; - int32_t w; - uint32_t opaque, zero; - - __m64 ms; - __m128i xmm_src, xmm_src_lo, xmm_src_hi; - __m128i xmm_dst, xmm_dst0, xmm_dst1, xmm_dst2, xmm_dst3; - - PIXMAN_IMAGE_GET_LINE ( - dst_image, dest_x, dest_y, uint16_t, dst_stride, dst_line, 1); - PIXMAN_IMAGE_GET_LINE ( - src_image, src_x, src_y, uint32_t, src_stride, src_line, 1); - -#if 0 - /* FIXME - * - * I copy the code from MMX one and keep the fixme. - * If it's a problem there, probably is a problem here. - */ - assert (src_image->drawable == mask_image->drawable); -#endif - - while (height--) - { - dst = dst_line; - dst_line += dst_stride; - src = src_line; - src_line += src_stride; - w = width; - - /* call prefetch hint to optimize cache load*/ - cache_prefetch ((__m128i*)src); - cache_prefetch ((__m128i*)dst); - - while (w && (unsigned long)dst & 15) - { - s = *src++; - d = *dst; - - ms = unpack_32_1x64 (s); - - *dst++ = pack_565_32_16 ( - pack_1x64_32 ( - over_rev_non_pre_1x64 (ms, expand565_16_1x64 (d)))); - w--; - } - - /* call prefetch hint to optimize cache load*/ - cache_prefetch ((__m128i*)src); - cache_prefetch ((__m128i*)dst); - - while (w >= 8) - { - /* fill cache line with next memory */ - cache_prefetch_next ((__m128i*)src); - cache_prefetch_next ((__m128i*)dst); - - /* First round */ - xmm_src = load_128_unaligned ((__m128i*)src); - xmm_dst = load_128_aligned ((__m128i*)dst); - - opaque = is_opaque (xmm_src); - zero = is_zero (xmm_src); - - unpack_565_128_4x128 (xmm_dst, - &xmm_dst0, &xmm_dst1, &xmm_dst2, &xmm_dst3); - unpack_128_2x128 (xmm_src, &xmm_src_lo, &xmm_src_hi); - - /* preload next round*/ - xmm_src = load_128_unaligned ((__m128i*)(src + 4)); - - if (opaque) - { - invert_colors_2x128 (xmm_src_lo, xmm_src_hi, - &xmm_dst0, &xmm_dst1); - } - else if (!zero) - { - over_rev_non_pre_2x128 (xmm_src_lo, xmm_src_hi, - &xmm_dst0, &xmm_dst1); - } - - /* Second round */ - opaque = is_opaque (xmm_src); - zero = is_zero (xmm_src); - - unpack_128_2x128 (xmm_src, &xmm_src_lo, &xmm_src_hi); - - if (opaque) - { - invert_colors_2x128 (xmm_src_lo, xmm_src_hi, - &xmm_dst2, &xmm_dst3); - } - else if (!zero) - { - over_rev_non_pre_2x128 (xmm_src_lo, xmm_src_hi, - &xmm_dst2, &xmm_dst3); - } - - save_128_aligned ( - (__m128i*)dst, pack_565_4x128_128 ( - &xmm_dst0, &xmm_dst1, &xmm_dst2, &xmm_dst3)); - - w -= 8; - src += 8; - dst += 8; - } - - while (w) - { - s = *src++; - d = *dst; - - ms = unpack_32_1x64 (s); - - *dst++ = pack_565_32_16 ( - pack_1x64_32 ( - over_rev_non_pre_1x64 (ms, expand565_16_1x64 (d)))); - w--; - } - } - - _mm_empty (); -} - -/* ------------------------------------------------------------------------- - * composite_over_pixbuf_8888 - */ - -static void -sse2_composite_over_pixbuf_8888 (pixman_implementation_t *imp, - pixman_op_t op, - pixman_image_t * src_image, - pixman_image_t * mask_image, - pixman_image_t * dst_image, - int32_t src_x, - int32_t src_y, - int32_t mask_x, - int32_t mask_y, - int32_t dest_x, - int32_t dest_y, - int32_t width, - int32_t height) -{ - uint32_t *dst_line, *dst, d; - uint32_t *src_line, *src, s; - int dst_stride, src_stride; - int32_t w; - uint32_t opaque, zero; - - __m128i xmm_src_lo, xmm_src_hi; - __m128i xmm_dst_lo, xmm_dst_hi; - - PIXMAN_IMAGE_GET_LINE ( - dst_image, dest_x, dest_y, uint32_t, dst_stride, dst_line, 1); - PIXMAN_IMAGE_GET_LINE ( - src_image, src_x, src_y, uint32_t, src_stride, src_line, 1); - -#if 0 - /* FIXME - * - * I copy the code from MMX one and keep the fixme. - * If it's a problem there, probably is a problem here. - */ - assert (src_image->drawable == mask_image->drawable); -#endif - - while (height--) - { - dst = dst_line; - dst_line += dst_stride; - src = src_line; - src_line += src_stride; - w = width; - - /* call prefetch hint to optimize cache load*/ - cache_prefetch ((__m128i*)src); - cache_prefetch ((__m128i*)dst); - - while (w && (unsigned long)dst & 15) - { - s = *src++; - d = *dst; - - *dst++ = pack_1x64_32 ( - over_rev_non_pre_1x64 ( - unpack_32_1x64 (s), unpack_32_1x64 (d))); - - w--; - } - - /* call prefetch hint to optimize cache load*/ - cache_prefetch ((__m128i*)src); - cache_prefetch ((__m128i*)dst); - - while (w >= 4) - { - /* fill cache line with next memory */ - cache_prefetch_next ((__m128i*)src); - cache_prefetch_next ((__m128i*)dst); - - xmm_src_hi = load_128_unaligned ((__m128i*)src); - - opaque = is_opaque (xmm_src_hi); - zero = is_zero (xmm_src_hi); - - unpack_128_2x128 (xmm_src_hi, &xmm_src_lo, &xmm_src_hi); - - if (opaque) - { - invert_colors_2x128 (xmm_src_lo, xmm_src_hi, - &xmm_dst_lo, &xmm_dst_hi); - - save_128_aligned ( - (__m128i*)dst, pack_2x128_128 (xmm_dst_lo, xmm_dst_hi)); - } - else if (!zero) - { - xmm_dst_hi = load_128_aligned ((__m128i*)dst); - - unpack_128_2x128 (xmm_dst_hi, &xmm_dst_lo, &xmm_dst_hi); - - over_rev_non_pre_2x128 (xmm_src_lo, xmm_src_hi, - &xmm_dst_lo, &xmm_dst_hi); - - save_128_aligned ( - (__m128i*)dst, pack_2x128_128 (xmm_dst_lo, xmm_dst_hi)); - } - - w -= 4; - dst += 4; - src += 4; - } - - while (w) - { - s = *src++; - d = *dst; - - *dst++ = pack_1x64_32 ( - over_rev_non_pre_1x64 ( - unpack_32_1x64 (s), unpack_32_1x64 (d))); - - w--; - } - } - - _mm_empty (); -} - -/* ------------------------------------------------------------------------------------------------- - * composite_over_n_8888_0565_ca - */ - -static void -sse2_composite_over_n_8888_0565_ca (pixman_implementation_t *imp, - pixman_op_t op, - pixman_image_t * src_image, - pixman_image_t * mask_image, - pixman_image_t * dst_image, - int32_t src_x, - int32_t src_y, - int32_t mask_x, - int32_t mask_y, - int32_t dest_x, - int32_t dest_y, - int32_t width, - int32_t height) -{ - uint32_t src; - uint16_t *dst_line, *dst, d; - uint32_t *mask_line, *mask, m; - int dst_stride, mask_stride; - int w; - uint32_t pack_cmp; - - __m128i xmm_src, xmm_alpha; - __m128i xmm_mask, xmm_mask_lo, xmm_mask_hi; - __m128i xmm_dst, xmm_dst0, xmm_dst1, xmm_dst2, xmm_dst3; - - __m64 mmx_src, mmx_alpha, mmx_mask, mmx_dest; - - src = _pixman_image_get_solid (src_image, dst_image->bits.format); - - if (src == 0) - return; - - PIXMAN_IMAGE_GET_LINE ( - dst_image, dest_x, dest_y, uint16_t, dst_stride, dst_line, 1); - PIXMAN_IMAGE_GET_LINE ( - mask_image, mask_x, mask_y, uint32_t, mask_stride, mask_line, 1); - - xmm_src = expand_pixel_32_1x128 (src); - xmm_alpha = expand_alpha_1x128 (xmm_src); - mmx_src = _mm_movepi64_pi64 (xmm_src); - mmx_alpha = _mm_movepi64_pi64 (xmm_alpha); - - while (height--) - { - w = width; - mask = mask_line; - dst = dst_line; - mask_line += mask_stride; - dst_line += dst_stride; - - /* call prefetch hint to optimize cache load*/ - cache_prefetch ((__m128i*)mask); - cache_prefetch ((__m128i*)dst); - - while (w && ((unsigned long)dst & 15)) - { - m = *(uint32_t *) mask; - - if (m) - { - d = *dst; - mmx_mask = unpack_32_1x64 (m); - mmx_dest = expand565_16_1x64 (d); - - *dst = pack_565_32_16 ( - pack_1x64_32 ( - in_over_1x64 ( - &mmx_src, &mmx_alpha, &mmx_mask, &mmx_dest))); - } - - w--; - dst++; - mask++; - } - - /* call prefetch hint to optimize cache load*/ - cache_prefetch ((__m128i*)mask); - cache_prefetch ((__m128i*)dst); - - while (w >= 8) - { - /* fill cache line with next memory */ - cache_prefetch_next ((__m128i*)mask); - cache_prefetch_next ((__m128i*)dst); - - /* First round */ - xmm_mask = load_128_unaligned ((__m128i*)mask); - xmm_dst = load_128_aligned ((__m128i*)dst); - - pack_cmp = _mm_movemask_epi8 ( - _mm_cmpeq_epi32 (xmm_mask, _mm_setzero_si128 ())); - - unpack_565_128_4x128 (xmm_dst, - &xmm_dst0, &xmm_dst1, &xmm_dst2, &xmm_dst3); - unpack_128_2x128 (xmm_mask, &xmm_mask_lo, &xmm_mask_hi); - - /* preload next round */ - xmm_mask = load_128_unaligned ((__m128i*)(mask + 4)); - - /* preload next round */ - if (pack_cmp != 0xffff) - { - in_over_2x128 (&xmm_src, &xmm_src, - &xmm_alpha, &xmm_alpha, - &xmm_mask_lo, &xmm_mask_hi, - &xmm_dst0, &xmm_dst1); - } - - /* Second round */ - pack_cmp = _mm_movemask_epi8 ( - _mm_cmpeq_epi32 (xmm_mask, _mm_setzero_si128 ())); - - unpack_128_2x128 (xmm_mask, &xmm_mask_lo, &xmm_mask_hi); - - if (pack_cmp != 0xffff) - { - in_over_2x128 (&xmm_src, &xmm_src, - &xmm_alpha, &xmm_alpha, - &xmm_mask_lo, &xmm_mask_hi, - &xmm_dst2, &xmm_dst3); - } - - save_128_aligned ( - (__m128i*)dst, pack_565_4x128_128 ( - &xmm_dst0, &xmm_dst1, &xmm_dst2, &xmm_dst3)); - - w -= 8; - dst += 8; - mask += 8; - } - - while (w) - { - m = *(uint32_t *) mask; - - if (m) - { - d = *dst; - mmx_mask = unpack_32_1x64 (m); - mmx_dest = expand565_16_1x64 (d); - - *dst = pack_565_32_16 ( - pack_1x64_32 ( - in_over_1x64 ( - &mmx_src, &mmx_alpha, &mmx_mask, &mmx_dest))); - } - - w--; - dst++; - mask++; - } - } - - _mm_empty (); -} - -/* ----------------------------------------------------------------------- - * composite_in_n_8_8 - */ - -static void -sse2_composite_in_n_8_8 (pixman_implementation_t *imp, - pixman_op_t op, - pixman_image_t * src_image, - pixman_image_t * mask_image, - pixman_image_t * dst_image, - int32_t src_x, - int32_t src_y, - int32_t mask_x, - int32_t mask_y, - int32_t dest_x, - int32_t dest_y, - int32_t width, - int32_t height) -{ - uint8_t *dst_line, *dst; - uint8_t *mask_line, *mask; - int dst_stride, mask_stride; - uint32_t d, m; - uint32_t src; - uint8_t sa; - int32_t w; - - __m128i xmm_alpha; - __m128i xmm_mask, xmm_mask_lo, xmm_mask_hi; - __m128i xmm_dst, xmm_dst_lo, xmm_dst_hi; - - PIXMAN_IMAGE_GET_LINE ( - dst_image, dest_x, dest_y, uint8_t, dst_stride, dst_line, 1); - PIXMAN_IMAGE_GET_LINE ( - mask_image, mask_x, mask_y, uint8_t, mask_stride, mask_line, 1); - - src = _pixman_image_get_solid (src_image, dst_image->bits.format); - - sa = src >> 24; - - xmm_alpha = expand_alpha_1x128 (expand_pixel_32_1x128 (src)); - - while (height--) - { - dst = dst_line; - dst_line += dst_stride; - mask = mask_line; - mask_line += mask_stride; - w = width; - - /* call prefetch hint to optimize cache load*/ - cache_prefetch ((__m128i*)mask); - cache_prefetch ((__m128i*)dst); - - while (w && ((unsigned long)dst & 15)) - { - m = (uint32_t) *mask++; - d = (uint32_t) *dst; - - *dst++ = (uint8_t) pack_1x64_32 ( - pix_multiply_1x64 ( - pix_multiply_1x64 (_mm_movepi64_pi64 (xmm_alpha), - unpack_32_1x64 (m)), - unpack_32_1x64 (d))); - w--; - } - - /* call prefetch hint to optimize cache load*/ - cache_prefetch ((__m128i*)mask); - cache_prefetch ((__m128i*)dst); - - while (w >= 16) - { - /* fill cache line with next memory */ - cache_prefetch_next ((__m128i*)mask); - cache_prefetch_next ((__m128i*)dst); - - xmm_mask = load_128_unaligned ((__m128i*)mask); - xmm_dst = load_128_aligned ((__m128i*)dst); - - unpack_128_2x128 (xmm_mask, &xmm_mask_lo, &xmm_mask_hi); - unpack_128_2x128 (xmm_dst, &xmm_dst_lo, &xmm_dst_hi); - - pix_multiply_2x128 (&xmm_alpha, &xmm_alpha, - &xmm_mask_lo, &xmm_mask_hi, - &xmm_mask_lo, &xmm_mask_hi); - - pix_multiply_2x128 (&xmm_mask_lo, &xmm_mask_hi, - &xmm_dst_lo, &xmm_dst_hi, - &xmm_dst_lo, &xmm_dst_hi); - - save_128_aligned ( - (__m128i*)dst, pack_2x128_128 (xmm_dst_lo, xmm_dst_hi)); - - mask += 16; - dst += 16; - w -= 16; - } - - while (w) - { - m = (uint32_t) *mask++; - d = (uint32_t) *dst; - - *dst++ = (uint8_t) pack_1x64_32 ( - pix_multiply_1x64 ( - pix_multiply_1x64 ( - _mm_movepi64_pi64 (xmm_alpha), unpack_32_1x64 (m)), - unpack_32_1x64 (d))); - w--; - } - } - - _mm_empty (); -} - -/* --------------------------------------------------------------------------- - * composite_in_8_8 - */ - -static void -sse2_composite_in_8_8 (pixman_implementation_t *imp, - pixman_op_t op, - pixman_image_t * src_image, - pixman_image_t * mask_image, - pixman_image_t * dst_image, - int32_t src_x, - int32_t src_y, - int32_t mask_x, - int32_t mask_y, - int32_t dest_x, - int32_t dest_y, - int32_t width, - int32_t height) -{ - uint8_t *dst_line, *dst; - uint8_t *src_line, *src; - int src_stride, dst_stride; - int32_t w; - uint32_t s, d; - - __m128i xmm_src, xmm_src_lo, xmm_src_hi; - __m128i xmm_dst, xmm_dst_lo, xmm_dst_hi; - - PIXMAN_IMAGE_GET_LINE ( - dst_image, dest_x, dest_y, uint8_t, dst_stride, dst_line, 1); - PIXMAN_IMAGE_GET_LINE ( - src_image, src_x, src_y, uint8_t, src_stride, src_line, 1); - - while (height--) - { - dst = dst_line; - dst_line += dst_stride; - src = src_line; - src_line += src_stride; - w = width; - - /* call prefetch hint to optimize cache load*/ - cache_prefetch ((__m128i*)src); - cache_prefetch ((__m128i*)dst); - - while (w && ((unsigned long)dst & 15)) - { - s = (uint32_t) *src++; - d = (uint32_t) *dst; - - *dst++ = (uint8_t) pack_1x64_32 ( - pix_multiply_1x64 ( - unpack_32_1x64 (s), unpack_32_1x64 (d))); - w--; - } - - /* call prefetch hint to optimize cache load*/ - cache_prefetch ((__m128i*)src); - cache_prefetch ((__m128i*)dst); - - while (w >= 16) - { - /* fill cache line with next memory */ - cache_prefetch_next ((__m128i*)src); - cache_prefetch_next ((__m128i*)dst); - - xmm_src = load_128_unaligned ((__m128i*)src); - xmm_dst = load_128_aligned ((__m128i*)dst); - - unpack_128_2x128 (xmm_src, &xmm_src_lo, &xmm_src_hi); - unpack_128_2x128 (xmm_dst, &xmm_dst_lo, &xmm_dst_hi); - - pix_multiply_2x128 (&xmm_src_lo, &xmm_src_hi, - &xmm_dst_lo, &xmm_dst_hi, - &xmm_dst_lo, &xmm_dst_hi); - - save_128_aligned ( - (__m128i*)dst, pack_2x128_128 (xmm_dst_lo, xmm_dst_hi)); - - src += 16; - dst += 16; - w -= 16; - } - - while (w) - { - s = (uint32_t) *src++; - d = (uint32_t) *dst; - - *dst++ = (uint8_t) pack_1x64_32 ( - pix_multiply_1x64 (unpack_32_1x64 (s), unpack_32_1x64 (d))); - w--; - } - } - - _mm_empty (); -} - -/* ------------------------------------------------------------------------- - * composite_add_n_8_8 - */ - -static void -sse2_composite_add_n_8_8 (pixman_implementation_t *imp, - pixman_op_t op, - pixman_image_t * src_image, - pixman_image_t * mask_image, - pixman_image_t * dst_image, - int32_t src_x, - int32_t src_y, - int32_t mask_x, - int32_t mask_y, - int32_t dest_x, - int32_t dest_y, - int32_t width, - int32_t height) -{ - uint8_t *dst_line, *dst; - uint8_t *mask_line, *mask; - int dst_stride, mask_stride; - int32_t w; - uint32_t src; - uint8_t sa; - uint32_t m, d; - - __m128i xmm_alpha; - __m128i xmm_mask, xmm_mask_lo, xmm_mask_hi; - __m128i xmm_dst, xmm_dst_lo, xmm_dst_hi; - - PIXMAN_IMAGE_GET_LINE ( - dst_image, dest_x, dest_y, uint8_t, dst_stride, dst_line, 1); - PIXMAN_IMAGE_GET_LINE ( - mask_image, mask_x, mask_y, uint8_t, mask_stride, mask_line, 1); - - src = _pixman_image_get_solid (src_image, dst_image->bits.format); - - sa = src >> 24; - - xmm_alpha = expand_alpha_1x128 (expand_pixel_32_1x128 (src)); - - while (height--) - { - dst = dst_line; - dst_line += dst_stride; - mask = mask_line; - mask_line += mask_stride; - w = width; - - /* call prefetch hint to optimize cache load*/ - cache_prefetch ((__m128i*)mask); - cache_prefetch ((__m128i*)dst); - - while (w && ((unsigned long)dst & 15)) - { - m = (uint32_t) *mask++; - d = (uint32_t) *dst; - - *dst++ = (uint8_t) pack_1x64_32 ( - _mm_adds_pu16 ( - pix_multiply_1x64 ( - _mm_movepi64_pi64 (xmm_alpha), unpack_32_1x64 (m)), - unpack_32_1x64 (d))); - w--; - } - - /* call prefetch hint to optimize cache load*/ - cache_prefetch ((__m128i*)mask); - cache_prefetch ((__m128i*)dst); - - while (w >= 16) - { - /* fill cache line with next memory */ - cache_prefetch_next ((__m128i*)mask); - cache_prefetch_next ((__m128i*)dst); - - xmm_mask = load_128_unaligned ((__m128i*)mask); - xmm_dst = load_128_aligned ((__m128i*)dst); - - unpack_128_2x128 (xmm_mask, &xmm_mask_lo, &xmm_mask_hi); - unpack_128_2x128 (xmm_dst, &xmm_dst_lo, &xmm_dst_hi); - - pix_multiply_2x128 (&xmm_alpha, &xmm_alpha, - &xmm_mask_lo, &xmm_mask_hi, - &xmm_mask_lo, &xmm_mask_hi); - - xmm_dst_lo = _mm_adds_epu16 (xmm_mask_lo, xmm_dst_lo); - xmm_dst_hi = _mm_adds_epu16 (xmm_mask_hi, xmm_dst_hi); - - save_128_aligned ( - (__m128i*)dst, pack_2x128_128 (xmm_dst_lo, xmm_dst_hi)); - - mask += 16; - dst += 16; - w -= 16; - } - - while (w) - { - m = (uint32_t) *mask++; - d = (uint32_t) *dst; - - *dst++ = (uint8_t) pack_1x64_32 ( - _mm_adds_pu16 ( - pix_multiply_1x64 ( - _mm_movepi64_pi64 (xmm_alpha), unpack_32_1x64 (m)), - unpack_32_1x64 (d))); - - w--; - } - } - - _mm_empty (); -} - -/* ---------------------------------------------------------------------- - * composite_add_8000_8000 - */ - -static void -sse2_composite_add_8000_8000 (pixman_implementation_t *imp, - pixman_op_t op, - pixman_image_t * src_image, - pixman_image_t * mask_image, - pixman_image_t * dst_image, - int32_t src_x, - int32_t src_y, - int32_t mask_x, - int32_t mask_y, - int32_t dest_x, - int32_t dest_y, - int32_t width, - int32_t height) -{ - uint8_t *dst_line, *dst; - uint8_t *src_line, *src; - int dst_stride, src_stride; - int32_t w; - uint16_t t; - - PIXMAN_IMAGE_GET_LINE ( - src_image, src_x, src_y, uint8_t, src_stride, src_line, 1); - PIXMAN_IMAGE_GET_LINE ( - dst_image, dest_x, dest_y, uint8_t, dst_stride, dst_line, 1); - - while (height--) - { - dst = dst_line; - src = src_line; - - /* call prefetch hint to optimize cache load*/ - cache_prefetch ((__m128i*)src); - cache_prefetch ((__m128i*)dst); - - dst_line += dst_stride; - src_line += src_stride; - w = width; - - /* Small head */ - while (w && (unsigned long)dst & 3) - { - t = (*dst) + (*src++); - *dst++ = t | (0 - (t >> 8)); - w--; - } - - core_combine_add_u_sse2 ((uint32_t*)dst, (uint32_t*)src, NULL, w >> 2); - - /* Small tail */ - dst += w & 0xfffc; - src += w & 0xfffc; - - w &= 3; - - while (w) - { - t = (*dst) + (*src++); - *dst++ = t | (0 - (t >> 8)); - w--; - } - } - - _mm_empty (); -} - -/* --------------------------------------------------------------------- - * composite_add_8888_8888 - */ -static void -sse2_composite_add_8888_8888 (pixman_implementation_t *imp, - pixman_op_t op, - pixman_image_t * src_image, - pixman_image_t * mask_image, - pixman_image_t * dst_image, - int32_t src_x, - int32_t src_y, - int32_t mask_x, - int32_t mask_y, - int32_t dest_x, - int32_t dest_y, - int32_t width, - int32_t height) -{ - uint32_t *dst_line, *dst; - uint32_t *src_line, *src; - int dst_stride, src_stride; - - PIXMAN_IMAGE_GET_LINE ( - src_image, src_x, src_y, uint32_t, src_stride, src_line, 1); - PIXMAN_IMAGE_GET_LINE ( - dst_image, dest_x, dest_y, uint32_t, dst_stride, dst_line, 1); - - while (height--) - { - dst = dst_line; - dst_line += dst_stride; - src = src_line; - src_line += src_stride; - - core_combine_add_u_sse2 (dst, src, NULL, width); - } - - _mm_empty (); -} - -/* ------------------------------------------------------------------------------------------------- - * sse2_composite_copy_area - */ - -static pixman_bool_t -pixman_blt_sse2 (uint32_t *src_bits, - uint32_t *dst_bits, - int src_stride, - int dst_stride, - int src_bpp, - int dst_bpp, - int src_x, - int src_y, - int dst_x, - int dst_y, - int width, - int height) -{ - uint8_t * src_bytes; - uint8_t * dst_bytes; - int byte_width; - - if (src_bpp != dst_bpp) - return FALSE; - - if (src_bpp == 16) - { - src_stride = src_stride * (int) sizeof (uint32_t) / 2; - dst_stride = dst_stride * (int) sizeof (uint32_t) / 2; - src_bytes =(uint8_t *)(((uint16_t *)src_bits) + src_stride * (src_y) + (src_x)); - dst_bytes = (uint8_t *)(((uint16_t *)dst_bits) + dst_stride * (dst_y) + (dst_x)); - byte_width = 2 * width; - src_stride *= 2; - dst_stride *= 2; - } - else if (src_bpp == 32) - { - src_stride = src_stride * (int) sizeof (uint32_t) / 4; - dst_stride = dst_stride * (int) sizeof (uint32_t) / 4; - src_bytes = (uint8_t *)(((uint32_t *)src_bits) + src_stride * (src_y) + (src_x)); - dst_bytes = (uint8_t *)(((uint32_t *)dst_bits) + dst_stride * (dst_y) + (dst_x)); - byte_width = 4 * width; - src_stride *= 4; - dst_stride *= 4; - } - else - { - return FALSE; - } - - cache_prefetch ((__m128i*)src_bytes); - cache_prefetch ((__m128i*)dst_bytes); - - while (height--) - { - int w; - uint8_t *s = src_bytes; - uint8_t *d = dst_bytes; - src_bytes += src_stride; - dst_bytes += dst_stride; - w = byte_width; - - cache_prefetch_next ((__m128i*)s); - cache_prefetch_next ((__m128i*)d); - - while (w >= 2 && ((unsigned long)d & 3)) - { - *(uint16_t *)d = *(uint16_t *)s; - w -= 2; - s += 2; - d += 2; - } - - while (w >= 4 && ((unsigned long)d & 15)) - { - *(uint32_t *)d = *(uint32_t *)s; - - w -= 4; - s += 4; - d += 4; - } - - cache_prefetch_next ((__m128i*)s); - cache_prefetch_next ((__m128i*)d); - - while (w >= 64) - { - __m128i xmm0, xmm1, xmm2, xmm3; - - /* 128 bytes ahead */ - cache_prefetch (((__m128i*)s) + 8); - cache_prefetch (((__m128i*)d) + 8); - - xmm0 = load_128_unaligned ((__m128i*)(s)); - xmm1 = load_128_unaligned ((__m128i*)(s + 16)); - xmm2 = load_128_unaligned ((__m128i*)(s + 32)); - xmm3 = load_128_unaligned ((__m128i*)(s + 48)); - - save_128_aligned ((__m128i*)(d), xmm0); - save_128_aligned ((__m128i*)(d + 16), xmm1); - save_128_aligned ((__m128i*)(d + 32), xmm2); - save_128_aligned ((__m128i*)(d + 48), xmm3); - - s += 64; - d += 64; - w -= 64; - } - - cache_prefetch_next ((__m128i*)s); - cache_prefetch_next ((__m128i*)d); - - while (w >= 16) - { - save_128_aligned ((__m128i*)d, load_128_unaligned ((__m128i*)s) ); - - w -= 16; - d += 16; - s += 16; - } - - cache_prefetch_next ((__m128i*)s); - cache_prefetch_next ((__m128i*)d); - - while (w >= 4) - { - *(uint32_t *)d = *(uint32_t *)s; - - w -= 4; - s += 4; - d += 4; - } - - if (w >= 2) - { - *(uint16_t *)d = *(uint16_t *)s; - w -= 2; - s += 2; - d += 2; - } - } - - _mm_empty (); - - return TRUE; -} - -static void -sse2_composite_copy_area (pixman_implementation_t *imp, - pixman_op_t op, - pixman_image_t * src_image, - pixman_image_t * mask_image, - pixman_image_t * dst_image, - int32_t src_x, - int32_t src_y, - int32_t mask_x, - int32_t mask_y, - int32_t dest_x, - int32_t dest_y, - int32_t width, - int32_t height) -{ - pixman_blt_sse2 (src_image->bits.bits, - dst_image->bits.bits, - src_image->bits.rowstride, - dst_image->bits.rowstride, - PIXMAN_FORMAT_BPP (src_image->bits.format), - PIXMAN_FORMAT_BPP (dst_image->bits.format), - src_x, src_y, dest_x, dest_y, width, height); -} - -static void -sse2_composite_over_x888_8_8888 (pixman_implementation_t *imp, - pixman_op_t op, - pixman_image_t * src_image, - pixman_image_t * mask_image, - pixman_image_t * dst_image, - int32_t src_x, - int32_t src_y, - int32_t mask_x, - int32_t mask_y, - int32_t dest_x, - int32_t dest_y, - int32_t width, - int32_t height) -{ - uint32_t *src, *src_line, s; - uint32_t *dst, *dst_line, d; - uint8_t *mask, *mask_line; - uint32_t m; - int src_stride, mask_stride, dst_stride; - int32_t w; - __m64 ms; - - __m128i xmm_src, xmm_src_lo, xmm_src_hi; - __m128i xmm_dst, xmm_dst_lo, xmm_dst_hi; - __m128i xmm_mask, xmm_mask_lo, xmm_mask_hi; - - PIXMAN_IMAGE_GET_LINE ( - dst_image, dest_x, dest_y, uint32_t, dst_stride, dst_line, 1); - PIXMAN_IMAGE_GET_LINE ( - mask_image, mask_x, mask_y, uint8_t, mask_stride, mask_line, 1); - PIXMAN_IMAGE_GET_LINE ( - src_image, src_x, src_y, uint32_t, src_stride, src_line, 1); - - while (height--) - { - src = src_line; - src_line += src_stride; - dst = dst_line; - dst_line += dst_stride; - mask = mask_line; - mask_line += mask_stride; - - w = width; - - /* call prefetch hint to optimize cache load*/ - cache_prefetch ((__m128i*)src); - cache_prefetch ((__m128i*)dst); - cache_prefetch ((__m128i*)mask); - - while (w && (unsigned long)dst & 15) - { - s = 0xff000000 | *src++; - m = (uint32_t) *mask++; - d = *dst; - ms = unpack_32_1x64 (s); - - if (m != 0xff) - { - __m64 ma = expand_alpha_rev_1x64 (unpack_32_1x64 (m)); - __m64 md = unpack_32_1x64 (d); - - ms = in_over_1x64 (&ms, &mask_x00ff, &ma, &md); - } - - *dst++ = pack_1x64_32 (ms); - w--; - } - - /* call prefetch hint to optimize cache load*/ - cache_prefetch ((__m128i*)src); - cache_prefetch ((__m128i*)dst); - cache_prefetch ((__m128i*)mask); - - while (w >= 4) - { - /* fill cache line with next memory */ - cache_prefetch_next ((__m128i*)src); - cache_prefetch_next ((__m128i*)dst); - cache_prefetch_next ((__m128i*)mask); - - m = *(uint32_t*) mask; - xmm_src = _mm_or_si128 (load_128_unaligned ((__m128i*)src), mask_ff000000); - - if (m == 0xffffffff) - { - save_128_aligned ((__m128i*)dst, xmm_src); - } - else - { - xmm_dst = load_128_aligned ((__m128i*)dst); - - xmm_mask = _mm_unpacklo_epi16 (unpack_32_1x128 (m), _mm_setzero_si128()); - - unpack_128_2x128 (xmm_src, &xmm_src_lo, &xmm_src_hi); - unpack_128_2x128 (xmm_mask, &xmm_mask_lo, &xmm_mask_hi); - unpack_128_2x128 (xmm_dst, &xmm_dst_lo, &xmm_dst_hi); - - expand_alpha_rev_2x128 (xmm_mask_lo, xmm_mask_hi, &xmm_mask_lo, &xmm_mask_hi); - - in_over_2x128 (&xmm_src_lo, &xmm_src_hi, &mask_00ff, &mask_00ff, &xmm_mask_lo, &xmm_mask_hi, &xmm_dst_lo, &xmm_dst_hi); - - save_128_aligned ((__m128i*)dst, pack_2x128_128 (xmm_dst_lo, xmm_dst_hi)); - } - - src += 4; - dst += 4; - mask += 4; - w -= 4; - } - - while (w) - { - m = (uint32_t) *mask++; - - if (m) - { - s = 0xff000000 | *src; - - if (m == 0xff) - { - *dst = s; - } - else - { - __m64 ma, md, ms; - - d = *dst; - - ma = expand_alpha_rev_1x64 (unpack_32_1x64 (m)); - md = unpack_32_1x64 (d); - ms = unpack_32_1x64 (s); - - *dst = pack_1x64_32 (in_over_1x64 (&ms, &mask_x00ff, &ma, &md)); - } - - } - - src++; - dst++; - w--; - } - } - - _mm_empty (); -} - -static void -sse2_composite_over_8888_8_8888 (pixman_implementation_t *imp, - pixman_op_t op, - pixman_image_t * src_image, - pixman_image_t * mask_image, - pixman_image_t * dst_image, - int32_t src_x, - int32_t src_y, - int32_t mask_x, - int32_t mask_y, - int32_t dest_x, - int32_t dest_y, - int32_t width, - int32_t height) -{ - uint32_t *src, *src_line, s; - uint32_t *dst, *dst_line, d; - uint8_t *mask, *mask_line; - uint32_t m; - int src_stride, mask_stride, dst_stride; - int32_t w; - - __m128i xmm_src, xmm_src_lo, xmm_src_hi, xmm_srca_lo, xmm_srca_hi; - __m128i xmm_dst, xmm_dst_lo, xmm_dst_hi; - __m128i xmm_mask, xmm_mask_lo, xmm_mask_hi; - - PIXMAN_IMAGE_GET_LINE ( - dst_image, dest_x, dest_y, uint32_t, dst_stride, dst_line, 1); - PIXMAN_IMAGE_GET_LINE ( - mask_image, mask_x, mask_y, uint8_t, mask_stride, mask_line, 1); - PIXMAN_IMAGE_GET_LINE ( - src_image, src_x, src_y, uint32_t, src_stride, src_line, 1); - - while (height--) - { - src = src_line; - src_line += src_stride; - dst = dst_line; - dst_line += dst_stride; - mask = mask_line; - mask_line += mask_stride; - - w = width; - - /* call prefetch hint to optimize cache load*/ - cache_prefetch ((__m128i *)src); - cache_prefetch ((__m128i *)dst); - cache_prefetch ((__m128i *)mask); - - while (w && (unsigned long)dst & 15) - { - uint32_t sa; - - s = *src++; - m = (uint32_t) *mask++; - d = *dst; - - sa = s >> 24; - - if (m) - { - if (sa == 0xff && m == 0xff) - { - *dst = s; - } - else - { - __m64 ms, md, ma, msa; - - ma = expand_alpha_rev_1x64 (load_32_1x64 (m)); - ms = unpack_32_1x64 (s); - md = unpack_32_1x64 (d); - - msa = expand_alpha_rev_1x64 (load_32_1x64 (sa)); - - *dst = pack_1x64_32 (in_over_1x64 (&ms, &msa, &ma, &md)); - } - } - - dst++; - w--; - } - - /* call prefetch hint to optimize cache load*/ - cache_prefetch ((__m128i *)src); - cache_prefetch ((__m128i *)dst); - cache_prefetch ((__m128i *)mask); - - while (w >= 4) - { - /* fill cache line with next memory */ - cache_prefetch_next ((__m128i *)src); - cache_prefetch_next ((__m128i *)dst); - cache_prefetch_next ((__m128i *)mask); - - m = *(uint32_t *) mask; - - if (m) - { - xmm_src = load_128_unaligned ((__m128i*)src); - - if (m == 0xffffffff && is_opaque (xmm_src)) - { - save_128_aligned ((__m128i *)dst, xmm_src); - } - else - { - xmm_dst = load_128_aligned ((__m128i *)dst); - - xmm_mask = _mm_unpacklo_epi16 (unpack_32_1x128 (m), _mm_setzero_si128()); - - unpack_128_2x128 (xmm_src, &xmm_src_lo, &xmm_src_hi); - unpack_128_2x128 (xmm_mask, &xmm_mask_lo, &xmm_mask_hi); - unpack_128_2x128 (xmm_dst, &xmm_dst_lo, &xmm_dst_hi); - - expand_alpha_2x128 (xmm_src_lo, xmm_src_hi, &xmm_srca_lo, &xmm_srca_hi); - expand_alpha_rev_2x128 (xmm_mask_lo, xmm_mask_hi, &xmm_mask_lo, &xmm_mask_hi); - - in_over_2x128 (&xmm_src_lo, &xmm_src_hi, &xmm_srca_lo, &xmm_srca_hi, - &xmm_mask_lo, &xmm_mask_hi, &xmm_dst_lo, &xmm_dst_hi); - - save_128_aligned ((__m128i*)dst, pack_2x128_128 (xmm_dst_lo, xmm_dst_hi)); - } - } - - src += 4; - dst += 4; - mask += 4; - w -= 4; - } - - while (w) - { - uint32_t sa; - - s = *src++; - m = (uint32_t) *mask++; - d = *dst; - - sa = s >> 24; - - if (m) - { - if (sa == 0xff && m == 0xff) - { - *dst = s; - } - else - { - __m64 ms, md, ma, msa; - - ma = expand_alpha_rev_1x64 (load_32_1x64 (m)); - ms = unpack_32_1x64 (s); - md = unpack_32_1x64 (d); - - msa = expand_alpha_rev_1x64 (load_32_1x64 (sa)); - - *dst = pack_1x64_32 (in_over_1x64 (&ms, &msa, &ma, &md)); - } - } - - dst++; - w--; - } - } - - _mm_empty (); -} - -static const pixman_fast_path_t sse2_fast_paths[] = -{ - /* PIXMAN_OP_OVER */ - PIXMAN_STD_FAST_PATH (OVER, solid, a8, r5g6b5, sse2_composite_over_n_8_0565), - PIXMAN_STD_FAST_PATH (OVER, solid, a8, b5g6r5, sse2_composite_over_n_8_0565), - PIXMAN_STD_FAST_PATH (OVER, solid, null, a8r8g8b8, sse2_composite_over_n_8888), - PIXMAN_STD_FAST_PATH (OVER, solid, null, x8r8g8b8, sse2_composite_over_n_8888), - PIXMAN_STD_FAST_PATH (OVER, solid, null, r5g6b5, sse2_composite_over_n_0565), - PIXMAN_STD_FAST_PATH (OVER, a8r8g8b8, null, a8r8g8b8, sse2_composite_over_8888_8888), - PIXMAN_STD_FAST_PATH (OVER, a8r8g8b8, null, x8r8g8b8, sse2_composite_over_8888_8888), - PIXMAN_STD_FAST_PATH (OVER, a8b8g8r8, null, a8b8g8r8, sse2_composite_over_8888_8888), - PIXMAN_STD_FAST_PATH (OVER, a8b8g8r8, null, x8b8g8r8, sse2_composite_over_8888_8888), - PIXMAN_STD_FAST_PATH (OVER, a8r8g8b8, null, r5g6b5, sse2_composite_over_8888_0565), - PIXMAN_STD_FAST_PATH (OVER, a8b8g8r8, null, b5g6r5, sse2_composite_over_8888_0565), - PIXMAN_STD_FAST_PATH (OVER, solid, a8, a8r8g8b8, sse2_composite_over_n_8_8888), - PIXMAN_STD_FAST_PATH (OVER, solid, a8, x8r8g8b8, sse2_composite_over_n_8_8888), - PIXMAN_STD_FAST_PATH (OVER, solid, a8, a8b8g8r8, sse2_composite_over_n_8_8888), - PIXMAN_STD_FAST_PATH (OVER, solid, a8, x8b8g8r8, sse2_composite_over_n_8_8888), - PIXMAN_STD_FAST_PATH (OVER, a8r8g8b8, a8, x8r8g8b8, sse2_composite_over_8888_8_8888), - PIXMAN_STD_FAST_PATH (OVER, a8r8g8b8, a8, a8r8g8b8, sse2_composite_over_8888_8_8888), - PIXMAN_STD_FAST_PATH (OVER, a8b8g8r8, a8, x8b8g8r8, sse2_composite_over_8888_8_8888), - PIXMAN_STD_FAST_PATH (OVER, a8b8g8r8, a8, a8b8g8r8, sse2_composite_over_8888_8_8888), - PIXMAN_STD_FAST_PATH (OVER, x8r8g8b8, a8, x8r8g8b8, sse2_composite_over_x888_8_8888), - PIXMAN_STD_FAST_PATH (OVER, x8r8g8b8, a8, a8r8g8b8, sse2_composite_over_x888_8_8888), - PIXMAN_STD_FAST_PATH (OVER, x8b8g8r8, a8, x8b8g8r8, sse2_composite_over_x888_8_8888), - PIXMAN_STD_FAST_PATH (OVER, x8b8g8r8, a8, a8b8g8r8, sse2_composite_over_x888_8_8888), - PIXMAN_STD_FAST_PATH (OVER, x8r8g8b8, solid, a8r8g8b8, sse2_composite_over_x888_n_8888), - PIXMAN_STD_FAST_PATH (OVER, x8r8g8b8, solid, x8r8g8b8, sse2_composite_over_x888_n_8888), - PIXMAN_STD_FAST_PATH (OVER, x8b8g8r8, solid, a8b8g8r8, sse2_composite_over_x888_n_8888), - PIXMAN_STD_FAST_PATH (OVER, x8b8g8r8, solid, x8b8g8r8, sse2_composite_over_x888_n_8888), - PIXMAN_STD_FAST_PATH (OVER, a8r8g8b8, solid, a8r8g8b8, sse2_composite_over_8888_n_8888), - PIXMAN_STD_FAST_PATH (OVER, a8r8g8b8, solid, x8r8g8b8, sse2_composite_over_8888_n_8888), - PIXMAN_STD_FAST_PATH (OVER, a8b8g8r8, solid, a8b8g8r8, sse2_composite_over_8888_n_8888), - PIXMAN_STD_FAST_PATH (OVER, a8b8g8r8, solid, x8b8g8r8, sse2_composite_over_8888_n_8888), - PIXMAN_STD_FAST_PATH_CA (OVER, solid, a8r8g8b8, a8r8g8b8, sse2_composite_over_n_8888_8888_ca), - PIXMAN_STD_FAST_PATH_CA (OVER, solid, a8r8g8b8, x8r8g8b8, sse2_composite_over_n_8888_8888_ca), - PIXMAN_STD_FAST_PATH_CA (OVER, solid, a8b8g8r8, a8b8g8r8, sse2_composite_over_n_8888_8888_ca), - PIXMAN_STD_FAST_PATH_CA (OVER, solid, a8b8g8r8, x8b8g8r8, sse2_composite_over_n_8888_8888_ca), - PIXMAN_STD_FAST_PATH_CA (OVER, solid, a8r8g8b8, r5g6b5, sse2_composite_over_n_8888_0565_ca), - PIXMAN_STD_FAST_PATH_CA (OVER, solid, a8b8g8r8, b5g6r5, sse2_composite_over_n_8888_0565_ca), - PIXMAN_STD_FAST_PATH (OVER, pixbuf, pixbuf, a8r8g8b8, sse2_composite_over_pixbuf_8888), - PIXMAN_STD_FAST_PATH (OVER, pixbuf, pixbuf, x8r8g8b8, sse2_composite_over_pixbuf_8888), - PIXMAN_STD_FAST_PATH (OVER, rpixbuf, rpixbuf, a8b8g8r8, sse2_composite_over_pixbuf_8888), - PIXMAN_STD_FAST_PATH (OVER, rpixbuf, rpixbuf, x8b8g8r8, sse2_composite_over_pixbuf_8888), - PIXMAN_STD_FAST_PATH (OVER, pixbuf, pixbuf, r5g6b5, sse2_composite_over_pixbuf_0565), - PIXMAN_STD_FAST_PATH (OVER, rpixbuf, rpixbuf, b5g6r5, sse2_composite_over_pixbuf_0565), - PIXMAN_STD_FAST_PATH (OVER, x8r8g8b8, null, x8r8g8b8, sse2_composite_copy_area), - PIXMAN_STD_FAST_PATH (OVER, x8b8g8r8, null, x8b8g8r8, sse2_composite_copy_area), - - /* PIXMAN_OP_ADD */ - PIXMAN_STD_FAST_PATH_CA (ADD, solid, a8r8g8b8, a8r8g8b8, sse2_composite_add_n_8888_8888_ca), - PIXMAN_STD_FAST_PATH (ADD, a8, null, a8, sse2_composite_add_8000_8000), - PIXMAN_STD_FAST_PATH (ADD, a8r8g8b8, null, a8r8g8b8, sse2_composite_add_8888_8888), - PIXMAN_STD_FAST_PATH (ADD, a8b8g8r8, null, a8b8g8r8, sse2_composite_add_8888_8888), - PIXMAN_STD_FAST_PATH (ADD, solid, a8, a8, sse2_composite_add_n_8_8), - - /* PIXMAN_OP_SRC */ - PIXMAN_STD_FAST_PATH (SRC, solid, a8, a8r8g8b8, sse2_composite_src_n_8_8888), - PIXMAN_STD_FAST_PATH (SRC, solid, a8, x8r8g8b8, sse2_composite_src_n_8_8888), - PIXMAN_STD_FAST_PATH (SRC, solid, a8, a8b8g8r8, sse2_composite_src_n_8_8888), - PIXMAN_STD_FAST_PATH (SRC, solid, a8, x8b8g8r8, sse2_composite_src_n_8_8888), - PIXMAN_STD_FAST_PATH (SRC, a8r8g8b8, null, a8r8g8b8, sse2_composite_copy_area), - PIXMAN_STD_FAST_PATH (SRC, a8b8g8r8, null, a8b8g8r8, sse2_composite_copy_area), - PIXMAN_STD_FAST_PATH (SRC, a8r8g8b8, null, x8r8g8b8, sse2_composite_copy_area), - PIXMAN_STD_FAST_PATH (SRC, a8b8g8r8, null, x8b8g8r8, sse2_composite_copy_area), - PIXMAN_STD_FAST_PATH (SRC, x8r8g8b8, null, x8r8g8b8, sse2_composite_copy_area), - PIXMAN_STD_FAST_PATH (SRC, x8b8g8r8, null, x8b8g8r8, sse2_composite_copy_area), - PIXMAN_STD_FAST_PATH (SRC, r5g6b5, null, r5g6b5, sse2_composite_copy_area), - PIXMAN_STD_FAST_PATH (SRC, b5g6r5, null, b5g6r5, sse2_composite_copy_area), - - /* PIXMAN_OP_IN */ - PIXMAN_STD_FAST_PATH (IN, a8, null, a8, sse2_composite_in_8_8), - PIXMAN_STD_FAST_PATH (IN, solid, a8, a8, sse2_composite_in_n_8_8), - - { PIXMAN_OP_NONE }, -}; - -static pixman_bool_t -sse2_blt (pixman_implementation_t *imp, - uint32_t * src_bits, - uint32_t * dst_bits, - int src_stride, - int dst_stride, - int src_bpp, - int dst_bpp, - int src_x, - int src_y, - int dst_x, - int dst_y, - int width, - int height) -{ - if (!pixman_blt_sse2 ( - src_bits, dst_bits, src_stride, dst_stride, src_bpp, dst_bpp, - src_x, src_y, dst_x, dst_y, width, height)) - - { - return _pixman_implementation_blt ( - imp->delegate, - src_bits, dst_bits, src_stride, dst_stride, src_bpp, dst_bpp, - src_x, src_y, dst_x, dst_y, width, height); - } - - return TRUE; -} - -#if defined(__GNUC__) && !defined(__x86_64__) && !defined(__amd64__) -__attribute__((__force_align_arg_pointer__)) -#endif -static pixman_bool_t -sse2_fill (pixman_implementation_t *imp, - uint32_t * bits, - int stride, - int bpp, - int x, - int y, - int width, - int height, - uint32_t xor) -{ - if (!pixman_fill_sse2 (bits, stride, bpp, x, y, width, height, xor)) - { - return _pixman_implementation_fill ( - imp->delegate, bits, stride, bpp, x, y, width, height, xor); - } - - return TRUE; -} - -#if defined(__GNUC__) && !defined(__x86_64__) && !defined(__amd64__) -__attribute__((__force_align_arg_pointer__)) -#endif -pixman_implementation_t * -_pixman_implementation_create_sse2 (void) -{ -#ifdef USE_MMX - pixman_implementation_t *fallback = _pixman_implementation_create_mmx (); -#else - pixman_implementation_t *fallback = _pixman_implementation_create_fast_path (); -#endif - pixman_implementation_t *imp = _pixman_implementation_create (fallback, sse2_fast_paths); - - /* SSE2 constants */ - mask_565_r = create_mask_2x32_128 (0x00f80000, 0x00f80000); - mask_565_g1 = create_mask_2x32_128 (0x00070000, 0x00070000); - mask_565_g2 = create_mask_2x32_128 (0x000000e0, 0x000000e0); - mask_565_b = create_mask_2x32_128 (0x0000001f, 0x0000001f); - mask_red = create_mask_2x32_128 (0x00f80000, 0x00f80000); - mask_green = create_mask_2x32_128 (0x0000fc00, 0x0000fc00); - mask_blue = create_mask_2x32_128 (0x000000f8, 0x000000f8); - mask_565_fix_rb = create_mask_2x32_128 (0x00e000e0, 0x00e000e0); - mask_565_fix_g = create_mask_2x32_128 (0x0000c000, 0x0000c000); - mask_0080 = create_mask_16_128 (0x0080); - mask_00ff = create_mask_16_128 (0x00ff); - mask_0101 = create_mask_16_128 (0x0101); - mask_ffff = create_mask_16_128 (0xffff); - mask_ff000000 = create_mask_2x32_128 (0xff000000, 0xff000000); - mask_alpha = create_mask_2x32_128 (0x00ff0000, 0x00000000); - - /* MMX constants */ - mask_x565_rgb = create_mask_2x32_64 (0x000001f0, 0x003f001f); - mask_x565_unpack = create_mask_2x32_64 (0x00000084, 0x04100840); - - mask_x0080 = create_mask_16_64 (0x0080); - mask_x00ff = create_mask_16_64 (0x00ff); - mask_x0101 = create_mask_16_64 (0x0101); - mask_x_alpha = create_mask_2x32_64 (0x00ff0000, 0x00000000); - - _mm_empty (); - - /* Set up function pointers */ - - /* SSE code patch for fbcompose.c */ - imp->combine_32[PIXMAN_OP_OVER] = sse2_combine_over_u; - imp->combine_32[PIXMAN_OP_OVER_REVERSE] = sse2_combine_over_reverse_u; - imp->combine_32[PIXMAN_OP_IN] = sse2_combine_in_u; - imp->combine_32[PIXMAN_OP_IN_REVERSE] = sse2_combine_in_reverse_u; - imp->combine_32[PIXMAN_OP_OUT] = sse2_combine_out_u; - imp->combine_32[PIXMAN_OP_OUT_REVERSE] = sse2_combine_out_reverse_u; - imp->combine_32[PIXMAN_OP_ATOP] = sse2_combine_atop_u; - imp->combine_32[PIXMAN_OP_ATOP_REVERSE] = sse2_combine_atop_reverse_u; - imp->combine_32[PIXMAN_OP_XOR] = sse2_combine_xor_u; - imp->combine_32[PIXMAN_OP_ADD] = sse2_combine_add_u; - - imp->combine_32[PIXMAN_OP_SATURATE] = sse2_combine_saturate_u; - - imp->combine_32_ca[PIXMAN_OP_SRC] = sse2_combine_src_ca; - imp->combine_32_ca[PIXMAN_OP_OVER] = sse2_combine_over_ca; - imp->combine_32_ca[PIXMAN_OP_OVER_REVERSE] = sse2_combine_over_reverse_ca; - imp->combine_32_ca[PIXMAN_OP_IN] = sse2_combine_in_ca; - imp->combine_32_ca[PIXMAN_OP_IN_REVERSE] = sse2_combine_in_reverse_ca; - imp->combine_32_ca[PIXMAN_OP_OUT] = sse2_combine_out_ca; - imp->combine_32_ca[PIXMAN_OP_OUT_REVERSE] = sse2_combine_out_reverse_ca; - imp->combine_32_ca[PIXMAN_OP_ATOP] = sse2_combine_atop_ca; - imp->combine_32_ca[PIXMAN_OP_ATOP_REVERSE] = sse2_combine_atop_reverse_ca; - imp->combine_32_ca[PIXMAN_OP_XOR] = sse2_combine_xor_ca; - imp->combine_32_ca[PIXMAN_OP_ADD] = sse2_combine_add_ca; - - imp->blt = sse2_blt; - imp->fill = sse2_fill; - - return imp; -} - -#endif /* USE_SSE2 */ +/*
+ * Copyright © 2008 Rodrigo Kumpera
+ * Copyright © 2008 André Tupinambá
+ *
+ * Permission to use, copy, modify, distribute, and sell this software and its
+ * documentation for any purpose is hereby granted without fee, provided that
+ * the above copyright notice appear in all copies and that both that
+ * copyright notice and this permission notice appear in supporting
+ * documentation, and that the name of Red Hat not be used in advertising or
+ * publicity pertaining to distribution of the software without specific,
+ * written prior permission. Red Hat makes no representations about the
+ * suitability of this software for any purpose. It is provided "as is"
+ * without express or implied warranty.
+ *
+ * THE COPYRIGHT HOLDERS DISCLAIM ALL WARRANTIES WITH REGARD TO THIS
+ * SOFTWARE, INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND
+ * FITNESS, IN NO EVENT SHALL THE COPYRIGHT HOLDERS BE LIABLE FOR ANY
+ * SPECIAL, INDIRECT OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN
+ * AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING
+ * OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS
+ * SOFTWARE.
+ *
+ * Author: Rodrigo Kumpera (kumpera@gmail.com)
+ * André Tupinambá (andrelrt@gmail.com)
+ *
+ * Based on work by Owen Taylor and Søren Sandmann
+ */
+#ifdef HAVE_CONFIG_H
+#include <config.h>
+#endif
+
+#include <mmintrin.h>
+#include <xmmintrin.h> /* for _mm_shuffle_pi16 and _MM_SHUFFLE */
+#include <emmintrin.h> /* for SSE2 intrinsics */
+#include "pixman-private.h"
+#include "pixman-combine32.h"
+
+#if defined(_MSC_VER) && defined(_M_AMD64)
+/* Windows 64 doesn't allow MMX to be used, so
+ * the pixman-x64-mmx-emulation.h file contains
+ * implementations of those MMX intrinsics that
+ * are used in the SSE2 implementation.
+ */
+# include "pixman-x64-mmx-emulation.h"
+#endif
+
+#ifdef USE_SSE2
+
+/* --------------------------------------------------------------------
+ * Locals
+ */
+
+static __m64 mask_x0080;
+static __m64 mask_x00ff;
+static __m64 mask_x0101;
+static __m64 mask_x_alpha;
+
+static __m64 mask_x565_rgb;
+static __m64 mask_x565_unpack;
+
+static __m128i mask_0080;
+static __m128i mask_00ff;
+static __m128i mask_0101;
+static __m128i mask_ffff;
+static __m128i mask_ff000000;
+static __m128i mask_alpha;
+
+static __m128i mask_565_r;
+static __m128i mask_565_g1, mask_565_g2;
+static __m128i mask_565_b;
+static __m128i mask_red;
+static __m128i mask_green;
+static __m128i mask_blue;
+
+static __m128i mask_565_fix_rb;
+static __m128i mask_565_fix_g;
+
+/* ----------------------------------------------------------------------
+ * SSE2 Inlines
+ */
+static force_inline __m128i
+unpack_32_1x128 (uint32_t data)
+{
+ return _mm_unpacklo_epi8 (_mm_cvtsi32_si128 (data), _mm_setzero_si128 ());
+}
+
+static force_inline void
+unpack_128_2x128 (__m128i data, __m128i* data_lo, __m128i* data_hi)
+{
+ *data_lo = _mm_unpacklo_epi8 (data, _mm_setzero_si128 ());
+ *data_hi = _mm_unpackhi_epi8 (data, _mm_setzero_si128 ());
+}
+
+static force_inline __m128i
+unpack_565_to_8888 (__m128i lo)
+{
+ __m128i r, g, b, rb, t;
+
+ r = _mm_and_si128 (_mm_slli_epi32 (lo, 8), mask_red);
+ g = _mm_and_si128 (_mm_slli_epi32 (lo, 5), mask_green);
+ b = _mm_and_si128 (_mm_slli_epi32 (lo, 3), mask_blue);
+
+ rb = _mm_or_si128 (r, b);
+ t = _mm_and_si128 (rb, mask_565_fix_rb);
+ t = _mm_srli_epi32 (t, 5);
+ rb = _mm_or_si128 (rb, t);
+
+ t = _mm_and_si128 (g, mask_565_fix_g);
+ t = _mm_srli_epi32 (t, 6);
+ g = _mm_or_si128 (g, t);
+
+ return _mm_or_si128 (rb, g);
+}
+
+static force_inline void
+unpack_565_128_4x128 (__m128i data,
+ __m128i* data0,
+ __m128i* data1,
+ __m128i* data2,
+ __m128i* data3)
+{
+ __m128i lo, hi;
+
+ lo = _mm_unpacklo_epi16 (data, _mm_setzero_si128 ());
+ hi = _mm_unpackhi_epi16 (data, _mm_setzero_si128 ());
+
+ lo = unpack_565_to_8888 (lo);
+ hi = unpack_565_to_8888 (hi);
+
+ unpack_128_2x128 (lo, data0, data1);
+ unpack_128_2x128 (hi, data2, data3);
+}
+
+static force_inline uint16_t
+pack_565_32_16 (uint32_t pixel)
+{
+ return (uint16_t) (((pixel >> 8) & 0xf800) |
+ ((pixel >> 5) & 0x07e0) |
+ ((pixel >> 3) & 0x001f));
+}
+
+static force_inline __m128i
+pack_2x128_128 (__m128i lo, __m128i hi)
+{
+ return _mm_packus_epi16 (lo, hi);
+}
+
+static force_inline __m128i
+pack_565_2x128_128 (__m128i lo, __m128i hi)
+{
+ __m128i data;
+ __m128i r, g1, g2, b;
+
+ data = pack_2x128_128 (lo, hi);
+
+ r = _mm_and_si128 (data, mask_565_r);
+ g1 = _mm_and_si128 (_mm_slli_epi32 (data, 3), mask_565_g1);
+ g2 = _mm_and_si128 (_mm_srli_epi32 (data, 5), mask_565_g2);
+ b = _mm_and_si128 (_mm_srli_epi32 (data, 3), mask_565_b);
+
+ return _mm_or_si128 (_mm_or_si128 (_mm_or_si128 (r, g1), g2), b);
+}
+
+static force_inline __m128i
+pack_565_4x128_128 (__m128i* xmm0, __m128i* xmm1, __m128i* xmm2, __m128i* xmm3)
+{
+ return _mm_packus_epi16 (pack_565_2x128_128 (*xmm0, *xmm1),
+ pack_565_2x128_128 (*xmm2, *xmm3));
+}
+
+static force_inline int
+is_opaque (__m128i x)
+{
+ __m128i ffs = _mm_cmpeq_epi8 (x, x);
+
+ return (_mm_movemask_epi8 (_mm_cmpeq_epi8 (x, ffs)) & 0x8888) == 0x8888;
+}
+
+static force_inline int
+is_zero (__m128i x)
+{
+ return _mm_movemask_epi8 (
+ _mm_cmpeq_epi8 (x, _mm_setzero_si128 ())) == 0xffff;
+}
+
+static force_inline int
+is_transparent (__m128i x)
+{
+ return (_mm_movemask_epi8 (
+ _mm_cmpeq_epi8 (x, _mm_setzero_si128 ())) & 0x8888) == 0x8888;
+}
+
+static force_inline __m128i
+expand_pixel_32_1x128 (uint32_t data)
+{
+ return _mm_shuffle_epi32 (unpack_32_1x128 (data), _MM_SHUFFLE (1, 0, 1, 0));
+}
+
+static force_inline __m128i
+expand_alpha_1x128 (__m128i data)
+{
+ return _mm_shufflehi_epi16 (_mm_shufflelo_epi16 (data,
+ _MM_SHUFFLE (3, 3, 3, 3)),
+ _MM_SHUFFLE (3, 3, 3, 3));
+}
+
+static force_inline void
+expand_alpha_2x128 (__m128i data_lo,
+ __m128i data_hi,
+ __m128i* alpha_lo,
+ __m128i* alpha_hi)
+{
+ __m128i lo, hi;
+
+ lo = _mm_shufflelo_epi16 (data_lo, _MM_SHUFFLE (3, 3, 3, 3));
+ hi = _mm_shufflelo_epi16 (data_hi, _MM_SHUFFLE (3, 3, 3, 3));
+
+ *alpha_lo = _mm_shufflehi_epi16 (lo, _MM_SHUFFLE (3, 3, 3, 3));
+ *alpha_hi = _mm_shufflehi_epi16 (hi, _MM_SHUFFLE (3, 3, 3, 3));
+}
+
+static force_inline void
+expand_alpha_rev_2x128 (__m128i data_lo,
+ __m128i data_hi,
+ __m128i* alpha_lo,
+ __m128i* alpha_hi)
+{
+ __m128i lo, hi;
+
+ lo = _mm_shufflelo_epi16 (data_lo, _MM_SHUFFLE (0, 0, 0, 0));
+ hi = _mm_shufflelo_epi16 (data_hi, _MM_SHUFFLE (0, 0, 0, 0));
+ *alpha_lo = _mm_shufflehi_epi16 (lo, _MM_SHUFFLE (0, 0, 0, 0));
+ *alpha_hi = _mm_shufflehi_epi16 (hi, _MM_SHUFFLE (0, 0, 0, 0));
+}
+
+static force_inline void
+pix_multiply_2x128 (__m128i* data_lo,
+ __m128i* data_hi,
+ __m128i* alpha_lo,
+ __m128i* alpha_hi,
+ __m128i* ret_lo,
+ __m128i* ret_hi)
+{
+ __m128i lo, hi;
+
+ lo = _mm_mullo_epi16 (*data_lo, *alpha_lo);
+ hi = _mm_mullo_epi16 (*data_hi, *alpha_hi);
+ lo = _mm_adds_epu16 (lo, mask_0080);
+ hi = _mm_adds_epu16 (hi, mask_0080);
+ *ret_lo = _mm_mulhi_epu16 (lo, mask_0101);
+ *ret_hi = _mm_mulhi_epu16 (hi, mask_0101);
+}
+
+static force_inline void
+pix_add_multiply_2x128 (__m128i* src_lo,
+ __m128i* src_hi,
+ __m128i* alpha_dst_lo,
+ __m128i* alpha_dst_hi,
+ __m128i* dst_lo,
+ __m128i* dst_hi,
+ __m128i* alpha_src_lo,
+ __m128i* alpha_src_hi,
+ __m128i* ret_lo,
+ __m128i* ret_hi)
+{
+ __m128i t1_lo, t1_hi;
+ __m128i t2_lo, t2_hi;
+
+ pix_multiply_2x128 (src_lo, src_hi, alpha_dst_lo, alpha_dst_hi, &t1_lo, &t1_hi);
+ pix_multiply_2x128 (dst_lo, dst_hi, alpha_src_lo, alpha_src_hi, &t2_lo, &t2_hi);
+
+ *ret_lo = _mm_adds_epu8 (t1_lo, t2_lo);
+ *ret_hi = _mm_adds_epu8 (t1_hi, t2_hi);
+}
+
+static force_inline void
+negate_2x128 (__m128i data_lo,
+ __m128i data_hi,
+ __m128i* neg_lo,
+ __m128i* neg_hi)
+{
+ *neg_lo = _mm_xor_si128 (data_lo, mask_00ff);
+ *neg_hi = _mm_xor_si128 (data_hi, mask_00ff);
+}
+
+static force_inline void
+invert_colors_2x128 (__m128i data_lo,
+ __m128i data_hi,
+ __m128i* inv_lo,
+ __m128i* inv_hi)
+{
+ __m128i lo, hi;
+
+ lo = _mm_shufflelo_epi16 (data_lo, _MM_SHUFFLE (3, 0, 1, 2));
+ hi = _mm_shufflelo_epi16 (data_hi, _MM_SHUFFLE (3, 0, 1, 2));
+ *inv_lo = _mm_shufflehi_epi16 (lo, _MM_SHUFFLE (3, 0, 1, 2));
+ *inv_hi = _mm_shufflehi_epi16 (hi, _MM_SHUFFLE (3, 0, 1, 2));
+}
+
+static force_inline void
+over_2x128 (__m128i* src_lo,
+ __m128i* src_hi,
+ __m128i* alpha_lo,
+ __m128i* alpha_hi,
+ __m128i* dst_lo,
+ __m128i* dst_hi)
+{
+ __m128i t1, t2;
+
+ negate_2x128 (*alpha_lo, *alpha_hi, &t1, &t2);
+
+ pix_multiply_2x128 (dst_lo, dst_hi, &t1, &t2, dst_lo, dst_hi);
+
+ *dst_lo = _mm_adds_epu8 (*src_lo, *dst_lo);
+ *dst_hi = _mm_adds_epu8 (*src_hi, *dst_hi);
+}
+
+static force_inline void
+over_rev_non_pre_2x128 (__m128i src_lo,
+ __m128i src_hi,
+ __m128i* dst_lo,
+ __m128i* dst_hi)
+{
+ __m128i lo, hi;
+ __m128i alpha_lo, alpha_hi;
+
+ expand_alpha_2x128 (src_lo, src_hi, &alpha_lo, &alpha_hi);
+
+ lo = _mm_or_si128 (alpha_lo, mask_alpha);
+ hi = _mm_or_si128 (alpha_hi, mask_alpha);
+
+ invert_colors_2x128 (src_lo, src_hi, &src_lo, &src_hi);
+
+ pix_multiply_2x128 (&src_lo, &src_hi, &lo, &hi, &lo, &hi);
+
+ over_2x128 (&lo, &hi, &alpha_lo, &alpha_hi, dst_lo, dst_hi);
+}
+
+static force_inline void
+in_over_2x128 (__m128i* src_lo,
+ __m128i* src_hi,
+ __m128i* alpha_lo,
+ __m128i* alpha_hi,
+ __m128i* mask_lo,
+ __m128i* mask_hi,
+ __m128i* dst_lo,
+ __m128i* dst_hi)
+{
+ __m128i s_lo, s_hi;
+ __m128i a_lo, a_hi;
+
+ pix_multiply_2x128 (src_lo, src_hi, mask_lo, mask_hi, &s_lo, &s_hi);
+ pix_multiply_2x128 (alpha_lo, alpha_hi, mask_lo, mask_hi, &a_lo, &a_hi);
+
+ over_2x128 (&s_lo, &s_hi, &a_lo, &a_hi, dst_lo, dst_hi);
+}
+
+static force_inline void
+cache_prefetch (__m128i* addr)
+{
+ _mm_prefetch ((void const*)addr, _MM_HINT_T0);
+}
+
+static force_inline void
+cache_prefetch_next (__m128i* addr)
+{
+ _mm_prefetch ((void const *)(addr + 4), _MM_HINT_T0); /* 64 bytes ahead */
+}
+
+/* prefetching NULL is very slow on some systems. don't do that. */
+
+static force_inline void
+maybe_prefetch (__m128i* addr)
+{
+ if (addr)
+ cache_prefetch (addr);
+}
+
+static force_inline void
+maybe_prefetch_next (__m128i* addr)
+{
+ if (addr)
+ cache_prefetch_next (addr);
+}
+
+/* load 4 pixels from a 16-byte boundary aligned address */
+static force_inline __m128i
+load_128_aligned (__m128i* src)
+{
+ return _mm_load_si128 (src);
+}
+
+/* load 4 pixels from a unaligned address */
+static force_inline __m128i
+load_128_unaligned (const __m128i* src)
+{
+ return _mm_loadu_si128 (src);
+}
+
+/* save 4 pixels using Write Combining memory on a 16-byte
+ * boundary aligned address
+ */
+static force_inline void
+save_128_write_combining (__m128i* dst,
+ __m128i data)
+{
+ _mm_stream_si128 (dst, data);
+}
+
+/* save 4 pixels on a 16-byte boundary aligned address */
+static force_inline void
+save_128_aligned (__m128i* dst,
+ __m128i data)
+{
+ _mm_store_si128 (dst, data);
+}
+
+/* save 4 pixels on a unaligned address */
+static force_inline void
+save_128_unaligned (__m128i* dst,
+ __m128i data)
+{
+ _mm_storeu_si128 (dst, data);
+}
+
+/* ------------------------------------------------------------------
+ * MMX inlines
+ */
+
+static force_inline __m64
+load_32_1x64 (uint32_t data)
+{
+ return _mm_cvtsi32_si64 (data);
+}
+
+static force_inline __m64
+unpack_32_1x64 (uint32_t data)
+{
+ return _mm_unpacklo_pi8 (load_32_1x64 (data), _mm_setzero_si64 ());
+}
+
+static force_inline __m64
+expand_alpha_1x64 (__m64 data)
+{
+ return _mm_shuffle_pi16 (data, _MM_SHUFFLE (3, 3, 3, 3));
+}
+
+static force_inline __m64
+expand_alpha_rev_1x64 (__m64 data)
+{
+ return _mm_shuffle_pi16 (data, _MM_SHUFFLE (0, 0, 0, 0));
+}
+
+static force_inline __m64
+expand_pixel_8_1x64 (uint8_t data)
+{
+ return _mm_shuffle_pi16 (
+ unpack_32_1x64 ((uint32_t)data), _MM_SHUFFLE (0, 0, 0, 0));
+}
+
+static force_inline __m64
+pix_multiply_1x64 (__m64 data,
+ __m64 alpha)
+{
+ return _mm_mulhi_pu16 (_mm_adds_pu16 (_mm_mullo_pi16 (data, alpha),
+ mask_x0080),
+ mask_x0101);
+}
+
+static force_inline __m64
+pix_add_multiply_1x64 (__m64* src,
+ __m64* alpha_dst,
+ __m64* dst,
+ __m64* alpha_src)
+{
+ __m64 t1 = pix_multiply_1x64 (*src, *alpha_dst);
+ __m64 t2 = pix_multiply_1x64 (*dst, *alpha_src);
+
+ return _mm_adds_pu8 (t1, t2);
+}
+
+static force_inline __m64
+negate_1x64 (__m64 data)
+{
+ return _mm_xor_si64 (data, mask_x00ff);
+}
+
+static force_inline __m64
+invert_colors_1x64 (__m64 data)
+{
+ return _mm_shuffle_pi16 (data, _MM_SHUFFLE (3, 0, 1, 2));
+}
+
+static force_inline __m64
+over_1x64 (__m64 src, __m64 alpha, __m64 dst)
+{
+ return _mm_adds_pu8 (src, pix_multiply_1x64 (dst, negate_1x64 (alpha)));
+}
+
+static force_inline __m64
+in_over_1x64 (__m64* src, __m64* alpha, __m64* mask, __m64* dst)
+{
+ return over_1x64 (pix_multiply_1x64 (*src, *mask),
+ pix_multiply_1x64 (*alpha, *mask),
+ *dst);
+}
+
+static force_inline __m64
+over_rev_non_pre_1x64 (__m64 src, __m64 dst)
+{
+ __m64 alpha = expand_alpha_1x64 (src);
+
+ return over_1x64 (pix_multiply_1x64 (invert_colors_1x64 (src),
+ _mm_or_si64 (alpha, mask_x_alpha)),
+ alpha,
+ dst);
+}
+
+static force_inline uint32_t
+pack_1x64_32 (__m64 data)
+{
+ return _mm_cvtsi64_si32 (_mm_packs_pu16 (data, _mm_setzero_si64 ()));
+}
+
+/* Expand 16 bits positioned at @pos (0-3) of a mmx register into
+ *
+ * 00RR00GG00BB
+ *
+ * --- Expanding 565 in the low word ---
+ *
+ * m = (m << (32 - 3)) | (m << (16 - 5)) | m;
+ * m = m & (01f0003f001f);
+ * m = m * (008404100840);
+ * m = m >> 8;
+ *
+ * Note the trick here - the top word is shifted by another nibble to
+ * avoid it bumping into the middle word
+ */
+static force_inline __m64
+expand565_16_1x64 (uint16_t pixel)
+{
+ __m64 p;
+ __m64 t1, t2;
+
+ p = _mm_cvtsi32_si64 ((uint32_t) pixel);
+
+ t1 = _mm_slli_si64 (p, 36 - 11);
+ t2 = _mm_slli_si64 (p, 16 - 5);
+
+ p = _mm_or_si64 (t1, p);
+ p = _mm_or_si64 (t2, p);
+ p = _mm_and_si64 (p, mask_x565_rgb);
+ p = _mm_mullo_pi16 (p, mask_x565_unpack);
+
+ return _mm_srli_pi16 (p, 8);
+}
+
+/* ----------------------------------------------------------------------------
+ * Compose Core transformations
+ */
+static force_inline uint32_t
+core_combine_over_u_pixel_sse2 (uint32_t src, uint32_t dst)
+{
+ uint8_t a;
+ __m64 ms;
+
+ a = src >> 24;
+
+ if (a == 0xff)
+ {
+ return src;
+ }
+ else if (src)
+ {
+ ms = unpack_32_1x64 (src);
+ return pack_1x64_32 (
+ over_1x64 (ms, expand_alpha_1x64 (ms), unpack_32_1x64 (dst)));
+ }
+
+ return dst;
+}
+
+static force_inline uint32_t
+combine1 (const uint32_t *ps, const uint32_t *pm)
+{
+ uint32_t s = *ps;
+
+ if (pm)
+ {
+ __m64 ms, mm;
+
+ mm = unpack_32_1x64 (*pm);
+ mm = expand_alpha_1x64 (mm);
+
+ ms = unpack_32_1x64 (s);
+ ms = pix_multiply_1x64 (ms, mm);
+
+ s = pack_1x64_32 (ms);
+ }
+
+ return s;
+}
+
+static force_inline __m128i
+combine4 (const __m128i *ps, const __m128i *pm)
+{
+ __m128i xmm_src_lo, xmm_src_hi;
+ __m128i xmm_msk_lo, xmm_msk_hi;
+ __m128i s;
+
+ if (pm)
+ {
+ xmm_msk_lo = load_128_unaligned (pm);
+
+ if (is_transparent (xmm_msk_lo))
+ return _mm_setzero_si128 ();
+ }
+
+ s = load_128_unaligned (ps);
+
+ if (pm)
+ {
+ unpack_128_2x128 (s, &xmm_src_lo, &xmm_src_hi);
+ unpack_128_2x128 (xmm_msk_lo, &xmm_msk_lo, &xmm_msk_hi);
+
+ expand_alpha_2x128 (xmm_msk_lo, xmm_msk_hi, &xmm_msk_lo, &xmm_msk_hi);
+
+ pix_multiply_2x128 (&xmm_src_lo, &xmm_src_hi,
+ &xmm_msk_lo, &xmm_msk_hi,
+ &xmm_src_lo, &xmm_src_hi);
+
+ s = pack_2x128_128 (xmm_src_lo, xmm_src_hi);
+ }
+
+ return s;
+}
+
+static force_inline void
+core_combine_over_u_sse2 (uint32_t* pd,
+ const uint32_t* ps,
+ const uint32_t* pm,
+ int w)
+{
+ uint32_t s, d;
+
+ __m128i xmm_dst_lo, xmm_dst_hi;
+ __m128i xmm_src_lo, xmm_src_hi;
+ __m128i xmm_alpha_lo, xmm_alpha_hi;
+
+ /* call prefetch hint to optimize cache load*/
+ cache_prefetch ((__m128i*)ps);
+ cache_prefetch ((__m128i*)pd);
+ maybe_prefetch ((__m128i*)pm);
+
+ /* Align dst on a 16-byte boundary */
+ while (w && ((unsigned long)pd & 15))
+ {
+ d = *pd;
+ s = combine1 (ps, pm);
+
+ *pd++ = core_combine_over_u_pixel_sse2 (s, d);
+ ps++;
+ if (pm)
+ pm++;
+ w--;
+ }
+
+ /* call prefetch hint to optimize cache load*/
+ cache_prefetch ((__m128i*)ps);
+ cache_prefetch ((__m128i*)pd);
+ maybe_prefetch ((__m128i*)pm);
+
+ while (w >= 4)
+ {
+ /* fill cache line with next memory */
+ cache_prefetch_next ((__m128i*)ps);
+ cache_prefetch_next ((__m128i*)pd);
+ maybe_prefetch_next ((__m128i*)pm);
+
+ /* I'm loading unaligned because I'm not sure about
+ * the address alignment.
+ */
+ xmm_src_hi = combine4 ((__m128i*)ps, (__m128i*)pm);
+
+ if (is_opaque (xmm_src_hi))
+ {
+ save_128_aligned ((__m128i*)pd, xmm_src_hi);
+ }
+ else if (!is_zero (xmm_src_hi))
+ {
+ xmm_dst_hi = load_128_aligned ((__m128i*) pd);
+
+ unpack_128_2x128 (xmm_src_hi, &xmm_src_lo, &xmm_src_hi);
+ unpack_128_2x128 (xmm_dst_hi, &xmm_dst_lo, &xmm_dst_hi);
+
+ expand_alpha_2x128 (
+ xmm_src_lo, xmm_src_hi, &xmm_alpha_lo, &xmm_alpha_hi);
+
+ over_2x128 (&xmm_src_lo, &xmm_src_hi,
+ &xmm_alpha_lo, &xmm_alpha_hi,
+ &xmm_dst_lo, &xmm_dst_hi);
+
+ /* rebuid the 4 pixel data and save*/
+ save_128_aligned ((__m128i*)pd,
+ pack_2x128_128 (xmm_dst_lo, xmm_dst_hi));
+ }
+
+ w -= 4;
+ ps += 4;
+ pd += 4;
+ if (pm)
+ pm += 4;
+ }
+
+ while (w)
+ {
+ d = *pd;
+ s = combine1 (ps, pm);
+
+ *pd++ = core_combine_over_u_pixel_sse2 (s, d);
+ ps++;
+ if (pm)
+ pm++;
+
+ w--;
+ }
+}
+
+static force_inline void
+core_combine_over_reverse_u_sse2 (uint32_t* pd,
+ const uint32_t* ps,
+ const uint32_t* pm,
+ int w)
+{
+ uint32_t s, d;
+
+ __m128i xmm_dst_lo, xmm_dst_hi;
+ __m128i xmm_src_lo, xmm_src_hi;
+ __m128i xmm_alpha_lo, xmm_alpha_hi;
+
+ /* call prefetch hint to optimize cache load*/
+ cache_prefetch ((__m128i*)ps);
+ cache_prefetch ((__m128i*)pd);
+ maybe_prefetch ((__m128i*)pm);
+
+ /* Align dst on a 16-byte boundary */
+ while (w &&
+ ((unsigned long)pd & 15))
+ {
+ d = *pd;
+ s = combine1 (ps, pm);
+
+ *pd++ = core_combine_over_u_pixel_sse2 (d, s);
+ w--;
+ ps++;
+ if (pm)
+ pm++;
+ }
+
+ /* call prefetch hint to optimize cache load*/
+ cache_prefetch ((__m128i*)ps);
+ cache_prefetch ((__m128i*)pd);
+ maybe_prefetch ((__m128i*)pm);
+
+ while (w >= 4)
+ {
+ /* fill cache line with next memory */
+ cache_prefetch_next ((__m128i*)ps);
+ cache_prefetch_next ((__m128i*)pd);
+ maybe_prefetch_next ((__m128i*)pm);
+
+ /* I'm loading unaligned because I'm not sure
+ * about the address alignment.
+ */
+ xmm_src_hi = combine4 ((__m128i*)ps, (__m128i*)pm);
+ xmm_dst_hi = load_128_aligned ((__m128i*) pd);
+
+ unpack_128_2x128 (xmm_src_hi, &xmm_src_lo, &xmm_src_hi);
+ unpack_128_2x128 (xmm_dst_hi, &xmm_dst_lo, &xmm_dst_hi);
+
+ expand_alpha_2x128 (xmm_dst_lo, xmm_dst_hi,
+ &xmm_alpha_lo, &xmm_alpha_hi);
+
+ over_2x128 (&xmm_dst_lo, &xmm_dst_hi,
+ &xmm_alpha_lo, &xmm_alpha_hi,
+ &xmm_src_lo, &xmm_src_hi);
+
+ /* rebuid the 4 pixel data and save*/
+ save_128_aligned ((__m128i*)pd,
+ pack_2x128_128 (xmm_src_lo, xmm_src_hi));
+
+ w -= 4;
+ ps += 4;
+ pd += 4;
+
+ if (pm)
+ pm += 4;
+ }
+
+ while (w)
+ {
+ d = *pd;
+ s = combine1 (ps, pm);
+
+ *pd++ = core_combine_over_u_pixel_sse2 (d, s);
+ ps++;
+ w--;
+ if (pm)
+ pm++;
+ }
+}
+
+static force_inline uint32_t
+core_combine_in_u_pixelsse2 (uint32_t src, uint32_t dst)
+{
+ uint32_t maska = src >> 24;
+
+ if (maska == 0)
+ {
+ return 0;
+ }
+ else if (maska != 0xff)
+ {
+ return pack_1x64_32 (
+ pix_multiply_1x64 (unpack_32_1x64 (dst),
+ expand_alpha_1x64 (unpack_32_1x64 (src))));
+ }
+
+ return dst;
+}
+
+static force_inline void
+core_combine_in_u_sse2 (uint32_t* pd,
+ const uint32_t* ps,
+ const uint32_t* pm,
+ int w)
+{
+ uint32_t s, d;
+
+ __m128i xmm_src_lo, xmm_src_hi;
+ __m128i xmm_dst_lo, xmm_dst_hi;
+
+ /* call prefetch hint to optimize cache load*/
+ cache_prefetch ((__m128i*)ps);
+ cache_prefetch ((__m128i*)pd);
+ maybe_prefetch ((__m128i*)pm);
+
+ while (w && ((unsigned long) pd & 15))
+ {
+ s = combine1 (ps, pm);
+ d = *pd;
+
+ *pd++ = core_combine_in_u_pixelsse2 (d, s);
+ w--;
+ ps++;
+ if (pm)
+ pm++;
+ }
+
+ /* call prefetch hint to optimize cache load*/
+ cache_prefetch ((__m128i*)ps);
+ cache_prefetch ((__m128i*)pd);
+ maybe_prefetch ((__m128i*)pm);
+
+ while (w >= 4)
+ {
+ /* fill cache line with next memory */
+ cache_prefetch_next ((__m128i*)ps);
+ cache_prefetch_next ((__m128i*)pd);
+ maybe_prefetch_next ((__m128i*)pm);
+
+ xmm_dst_hi = load_128_aligned ((__m128i*) pd);
+ xmm_src_hi = combine4 ((__m128i*) ps, (__m128i*) pm);
+
+ unpack_128_2x128 (xmm_dst_hi, &xmm_dst_lo, &xmm_dst_hi);
+ expand_alpha_2x128 (xmm_dst_lo, xmm_dst_hi, &xmm_dst_lo, &xmm_dst_hi);
+
+ unpack_128_2x128 (xmm_src_hi, &xmm_src_lo, &xmm_src_hi);
+ pix_multiply_2x128 (&xmm_src_lo, &xmm_src_hi,
+ &xmm_dst_lo, &xmm_dst_hi,
+ &xmm_dst_lo, &xmm_dst_hi);
+
+ save_128_aligned ((__m128i*)pd,
+ pack_2x128_128 (xmm_dst_lo, xmm_dst_hi));
+
+ ps += 4;
+ pd += 4;
+ w -= 4;
+ if (pm)
+ pm += 4;
+ }
+
+ while (w)
+ {
+ s = combine1 (ps, pm);
+ d = *pd;
+
+ *pd++ = core_combine_in_u_pixelsse2 (d, s);
+ w--;
+ ps++;
+ if (pm)
+ pm++;
+ }
+}
+
+static force_inline void
+core_combine_reverse_in_u_sse2 (uint32_t* pd,
+ const uint32_t* ps,
+ const uint32_t *pm,
+ int w)
+{
+ uint32_t s, d;
+
+ __m128i xmm_src_lo, xmm_src_hi;
+ __m128i xmm_dst_lo, xmm_dst_hi;
+
+ /* call prefetch hint to optimize cache load*/
+ cache_prefetch ((__m128i*)ps);
+ cache_prefetch ((__m128i*)pd);
+ maybe_prefetch ((__m128i*)pm);
+
+ while (w && ((unsigned long) pd & 15))
+ {
+ s = combine1 (ps, pm);
+ d = *pd;
+
+ *pd++ = core_combine_in_u_pixelsse2 (s, d);
+ ps++;
+ w--;
+ if (pm)
+ pm++;
+ }
+
+ /* call prefetch hint to optimize cache load*/
+ cache_prefetch ((__m128i*)ps);
+ cache_prefetch ((__m128i*)pd);
+ maybe_prefetch ((__m128i*)pm);
+
+ while (w >= 4)
+ {
+ /* fill cache line with next memory */
+ cache_prefetch_next ((__m128i*)ps);
+ cache_prefetch_next ((__m128i*)pd);
+ maybe_prefetch_next ((__m128i*)pm);
+
+ xmm_dst_hi = load_128_aligned ((__m128i*) pd);
+ xmm_src_hi = combine4 ((__m128i*) ps, (__m128i*)pm);
+
+ unpack_128_2x128 (xmm_src_hi, &xmm_src_lo, &xmm_src_hi);
+ expand_alpha_2x128 (xmm_src_lo, xmm_src_hi, &xmm_src_lo, &xmm_src_hi);
+
+ unpack_128_2x128 (xmm_dst_hi, &xmm_dst_lo, &xmm_dst_hi);
+ pix_multiply_2x128 (&xmm_dst_lo, &xmm_dst_hi,
+ &xmm_src_lo, &xmm_src_hi,
+ &xmm_dst_lo, &xmm_dst_hi);
+
+ save_128_aligned (
+ (__m128i*)pd, pack_2x128_128 (xmm_dst_lo, xmm_dst_hi));
+
+ ps += 4;
+ pd += 4;
+ w -= 4;
+ if (pm)
+ pm += 4;
+ }
+
+ while (w)
+ {
+ s = combine1 (ps, pm);
+ d = *pd;
+
+ *pd++ = core_combine_in_u_pixelsse2 (s, d);
+ w--;
+ ps++;
+ if (pm)
+ pm++;
+ }
+}
+
+static force_inline void
+core_combine_reverse_out_u_sse2 (uint32_t* pd,
+ const uint32_t* ps,
+ const uint32_t* pm,
+ int w)
+{
+ /* call prefetch hint to optimize cache load*/
+ cache_prefetch ((__m128i*)ps);
+ cache_prefetch ((__m128i*)pd);
+ maybe_prefetch ((__m128i*)pm);
+
+ while (w && ((unsigned long) pd & 15))
+ {
+ uint32_t s = combine1 (ps, pm);
+ uint32_t d = *pd;
+
+ *pd++ = pack_1x64_32 (
+ pix_multiply_1x64 (
+ unpack_32_1x64 (d), negate_1x64 (
+ expand_alpha_1x64 (unpack_32_1x64 (s)))));
+
+ if (pm)
+ pm++;
+ ps++;
+ w--;
+ }
+
+ /* call prefetch hint to optimize cache load*/
+ cache_prefetch ((__m128i*)ps);
+ cache_prefetch ((__m128i*)pd);
+ maybe_prefetch ((__m128i*)pm);
+
+ while (w >= 4)
+ {
+ __m128i xmm_src_lo, xmm_src_hi;
+ __m128i xmm_dst_lo, xmm_dst_hi;
+
+ /* fill cache line with next memory */
+ cache_prefetch_next ((__m128i*)ps);
+ cache_prefetch_next ((__m128i*)pd);
+ maybe_prefetch_next ((__m128i*)pm);
+
+ xmm_src_hi = combine4 ((__m128i*)ps, (__m128i*)pm);
+ xmm_dst_hi = load_128_aligned ((__m128i*) pd);
+
+ unpack_128_2x128 (xmm_src_hi, &xmm_src_lo, &xmm_src_hi);
+ unpack_128_2x128 (xmm_dst_hi, &xmm_dst_lo, &xmm_dst_hi);
+
+ expand_alpha_2x128 (xmm_src_lo, xmm_src_hi, &xmm_src_lo, &xmm_src_hi);
+ negate_2x128 (xmm_src_lo, xmm_src_hi, &xmm_src_lo, &xmm_src_hi);
+
+ pix_multiply_2x128 (&xmm_dst_lo, &xmm_dst_hi,
+ &xmm_src_lo, &xmm_src_hi,
+ &xmm_dst_lo, &xmm_dst_hi);
+
+ save_128_aligned (
+ (__m128i*)pd, pack_2x128_128 (xmm_dst_lo, xmm_dst_hi));
+
+ ps += 4;
+ pd += 4;
+ if (pm)
+ pm += 4;
+
+ w -= 4;
+ }
+
+ while (w)
+ {
+ uint32_t s = combine1 (ps, pm);
+ uint32_t d = *pd;
+
+ *pd++ = pack_1x64_32 (
+ pix_multiply_1x64 (
+ unpack_32_1x64 (d), negate_1x64 (
+ expand_alpha_1x64 (unpack_32_1x64 (s)))));
+ ps++;
+ if (pm)
+ pm++;
+ w--;
+ }
+}
+
+static force_inline void
+core_combine_out_u_sse2 (uint32_t* pd,
+ const uint32_t* ps,
+ const uint32_t* pm,
+ int w)
+{
+ /* call prefetch hint to optimize cache load*/
+ cache_prefetch ((__m128i*)ps);
+ cache_prefetch ((__m128i*)pd);
+ maybe_prefetch ((__m128i*)pm);
+
+ while (w && ((unsigned long) pd & 15))
+ {
+ uint32_t s = combine1 (ps, pm);
+ uint32_t d = *pd;
+
+ *pd++ = pack_1x64_32 (
+ pix_multiply_1x64 (
+ unpack_32_1x64 (s), negate_1x64 (
+ expand_alpha_1x64 (unpack_32_1x64 (d)))));
+ w--;
+ ps++;
+ if (pm)
+ pm++;
+ }
+
+ /* call prefetch hint to optimize cache load*/
+ cache_prefetch ((__m128i*)ps);
+ cache_prefetch ((__m128i*)pd);
+ maybe_prefetch ((__m128i*)pm);
+
+ while (w >= 4)
+ {
+ __m128i xmm_src_lo, xmm_src_hi;
+ __m128i xmm_dst_lo, xmm_dst_hi;
+
+ /* fill cache line with next memory */
+ cache_prefetch_next ((__m128i*)ps);
+ cache_prefetch_next ((__m128i*)pd);
+ maybe_prefetch_next ((__m128i*)pm);
+
+ xmm_src_hi = combine4 ((__m128i*) ps, (__m128i*)pm);
+ xmm_dst_hi = load_128_aligned ((__m128i*) pd);
+
+ unpack_128_2x128 (xmm_src_hi, &xmm_src_lo, &xmm_src_hi);
+ unpack_128_2x128 (xmm_dst_hi, &xmm_dst_lo, &xmm_dst_hi);
+
+ expand_alpha_2x128 (xmm_dst_lo, xmm_dst_hi, &xmm_dst_lo, &xmm_dst_hi);
+ negate_2x128 (xmm_dst_lo, xmm_dst_hi, &xmm_dst_lo, &xmm_dst_hi);
+
+ pix_multiply_2x128 (&xmm_src_lo, &xmm_src_hi,
+ &xmm_dst_lo, &xmm_dst_hi,
+ &xmm_dst_lo, &xmm_dst_hi);
+
+ save_128_aligned (
+ (__m128i*)pd, pack_2x128_128 (xmm_dst_lo, xmm_dst_hi));
+
+ ps += 4;
+ pd += 4;
+ w -= 4;
+ if (pm)
+ pm += 4;
+ }
+
+ while (w)
+ {
+ uint32_t s = combine1 (ps, pm);
+ uint32_t d = *pd;
+
+ *pd++ = pack_1x64_32 (
+ pix_multiply_1x64 (
+ unpack_32_1x64 (s), negate_1x64 (
+ expand_alpha_1x64 (unpack_32_1x64 (d)))));
+ w--;
+ ps++;
+ if (pm)
+ pm++;
+ }
+}
+
+static force_inline uint32_t
+core_combine_atop_u_pixel_sse2 (uint32_t src,
+ uint32_t dst)
+{
+ __m64 s = unpack_32_1x64 (src);
+ __m64 d = unpack_32_1x64 (dst);
+
+ __m64 sa = negate_1x64 (expand_alpha_1x64 (s));
+ __m64 da = expand_alpha_1x64 (d);
+
+ return pack_1x64_32 (pix_add_multiply_1x64 (&s, &da, &d, &sa));
+}
+
+static force_inline void
+core_combine_atop_u_sse2 (uint32_t* pd,
+ const uint32_t* ps,
+ const uint32_t* pm,
+ int w)
+{
+ uint32_t s, d;
+
+ __m128i xmm_src_lo, xmm_src_hi;
+ __m128i xmm_dst_lo, xmm_dst_hi;
+ __m128i xmm_alpha_src_lo, xmm_alpha_src_hi;
+ __m128i xmm_alpha_dst_lo, xmm_alpha_dst_hi;
+
+ /* call prefetch hint to optimize cache load*/
+ cache_prefetch ((__m128i*)ps);
+ cache_prefetch ((__m128i*)pd);
+ maybe_prefetch ((__m128i*)pm);
+
+ while (w && ((unsigned long) pd & 15))
+ {
+ s = combine1 (ps, pm);
+ d = *pd;
+
+ *pd++ = core_combine_atop_u_pixel_sse2 (s, d);
+ w--;
+ ps++;
+ if (pm)
+ pm++;
+ }
+
+ /* call prefetch hint to optimize cache load*/
+ cache_prefetch ((__m128i*)ps);
+ cache_prefetch ((__m128i*)pd);
+ maybe_prefetch ((__m128i*)pm);
+
+ while (w >= 4)
+ {
+ /* fill cache line with next memory */
+ cache_prefetch_next ((__m128i*)ps);
+ cache_prefetch_next ((__m128i*)pd);
+ maybe_prefetch_next ((__m128i*)pm);
+
+ xmm_src_hi = combine4 ((__m128i*)ps, (__m128i*)pm);
+ xmm_dst_hi = load_128_aligned ((__m128i*) pd);
+
+ unpack_128_2x128 (xmm_src_hi, &xmm_src_lo, &xmm_src_hi);
+ unpack_128_2x128 (xmm_dst_hi, &xmm_dst_lo, &xmm_dst_hi);
+
+ expand_alpha_2x128 (xmm_src_lo, xmm_src_hi,
+ &xmm_alpha_src_lo, &xmm_alpha_src_hi);
+ expand_alpha_2x128 (xmm_dst_lo, xmm_dst_hi,
+ &xmm_alpha_dst_lo, &xmm_alpha_dst_hi);
+
+ negate_2x128 (xmm_alpha_src_lo, xmm_alpha_src_hi,
+ &xmm_alpha_src_lo, &xmm_alpha_src_hi);
+
+ pix_add_multiply_2x128 (
+ &xmm_src_lo, &xmm_src_hi, &xmm_alpha_dst_lo, &xmm_alpha_dst_hi,
+ &xmm_dst_lo, &xmm_dst_hi, &xmm_alpha_src_lo, &xmm_alpha_src_hi,
+ &xmm_dst_lo, &xmm_dst_hi);
+
+ save_128_aligned (
+ (__m128i*)pd, pack_2x128_128 (xmm_dst_lo, xmm_dst_hi));
+
+ ps += 4;
+ pd += 4;
+ w -= 4;
+ if (pm)
+ pm += 4;
+ }
+
+ while (w)
+ {
+ s = combine1 (ps, pm);
+ d = *pd;
+
+ *pd++ = core_combine_atop_u_pixel_sse2 (s, d);
+ w--;
+ ps++;
+ if (pm)
+ pm++;
+ }
+}
+
+static force_inline uint32_t
+core_combine_reverse_atop_u_pixel_sse2 (uint32_t src,
+ uint32_t dst)
+{
+ __m64 s = unpack_32_1x64 (src);
+ __m64 d = unpack_32_1x64 (dst);
+
+ __m64 sa = expand_alpha_1x64 (s);
+ __m64 da = negate_1x64 (expand_alpha_1x64 (d));
+
+ return pack_1x64_32 (pix_add_multiply_1x64 (&s, &da, &d, &sa));
+}
+
+static force_inline void
+core_combine_reverse_atop_u_sse2 (uint32_t* pd,
+ const uint32_t* ps,
+ const uint32_t* pm,
+ int w)
+{
+ uint32_t s, d;
+
+ __m128i xmm_src_lo, xmm_src_hi;
+ __m128i xmm_dst_lo, xmm_dst_hi;
+ __m128i xmm_alpha_src_lo, xmm_alpha_src_hi;
+ __m128i xmm_alpha_dst_lo, xmm_alpha_dst_hi;
+
+ /* call prefetch hint to optimize cache load*/
+ cache_prefetch ((__m128i*)ps);
+ cache_prefetch ((__m128i*)pd);
+ maybe_prefetch ((__m128i*)pm);
+
+ while (w && ((unsigned long) pd & 15))
+ {
+ s = combine1 (ps, pm);
+ d = *pd;
+
+ *pd++ = core_combine_reverse_atop_u_pixel_sse2 (s, d);
+ ps++;
+ w--;
+ if (pm)
+ pm++;
+ }
+
+ /* call prefetch hint to optimize cache load*/
+ cache_prefetch ((__m128i*)ps);
+ cache_prefetch ((__m128i*)pd);
+ maybe_prefetch ((__m128i*)pm);
+
+ while (w >= 4)
+ {
+ /* fill cache line with next memory */
+ cache_prefetch_next ((__m128i*)ps);
+ cache_prefetch_next ((__m128i*)pd);
+ maybe_prefetch_next ((__m128i*)pm);
+
+ xmm_src_hi = combine4 ((__m128i*)ps, (__m128i*)pm);
+ xmm_dst_hi = load_128_aligned ((__m128i*) pd);
+
+ unpack_128_2x128 (xmm_src_hi, &xmm_src_lo, &xmm_src_hi);
+ unpack_128_2x128 (xmm_dst_hi, &xmm_dst_lo, &xmm_dst_hi);
+
+ expand_alpha_2x128 (xmm_src_lo, xmm_src_hi,
+ &xmm_alpha_src_lo, &xmm_alpha_src_hi);
+ expand_alpha_2x128 (xmm_dst_lo, xmm_dst_hi,
+ &xmm_alpha_dst_lo, &xmm_alpha_dst_hi);
+
+ negate_2x128 (xmm_alpha_dst_lo, xmm_alpha_dst_hi,
+ &xmm_alpha_dst_lo, &xmm_alpha_dst_hi);
+
+ pix_add_multiply_2x128 (
+ &xmm_src_lo, &xmm_src_hi, &xmm_alpha_dst_lo, &xmm_alpha_dst_hi,
+ &xmm_dst_lo, &xmm_dst_hi, &xmm_alpha_src_lo, &xmm_alpha_src_hi,
+ &xmm_dst_lo, &xmm_dst_hi);
+
+ save_128_aligned (
+ (__m128i*)pd, pack_2x128_128 (xmm_dst_lo, xmm_dst_hi));
+
+ ps += 4;
+ pd += 4;
+ w -= 4;
+ if (pm)
+ pm += 4;
+ }
+
+ while (w)
+ {
+ s = combine1 (ps, pm);
+ d = *pd;
+
+ *pd++ = core_combine_reverse_atop_u_pixel_sse2 (s, d);
+ ps++;
+ w--;
+ if (pm)
+ pm++;
+ }
+}
+
+static force_inline uint32_t
+core_combine_xor_u_pixel_sse2 (uint32_t src,
+ uint32_t dst)
+{
+ __m64 s = unpack_32_1x64 (src);
+ __m64 d = unpack_32_1x64 (dst);
+
+ __m64 neg_d = negate_1x64 (expand_alpha_1x64 (d));
+ __m64 neg_s = negate_1x64 (expand_alpha_1x64 (s));
+
+ return pack_1x64_32 (pix_add_multiply_1x64 (&s, &neg_d, &d, &neg_s));
+}
+
+static force_inline void
+core_combine_xor_u_sse2 (uint32_t* dst,
+ const uint32_t* src,
+ const uint32_t *mask,
+ int width)
+{
+ int w = width;
+ uint32_t s, d;
+ uint32_t* pd = dst;
+ const uint32_t* ps = src;
+ const uint32_t* pm = mask;
+
+ __m128i xmm_src, xmm_src_lo, xmm_src_hi;
+ __m128i xmm_dst, xmm_dst_lo, xmm_dst_hi;
+ __m128i xmm_alpha_src_lo, xmm_alpha_src_hi;
+ __m128i xmm_alpha_dst_lo, xmm_alpha_dst_hi;
+
+ /* call prefetch hint to optimize cache load*/
+ cache_prefetch ((__m128i*)ps);
+ cache_prefetch ((__m128i*)pd);
+ maybe_prefetch ((__m128i*)pm);
+
+ while (w && ((unsigned long) pd & 15))
+ {
+ s = combine1 (ps, pm);
+ d = *pd;
+
+ *pd++ = core_combine_xor_u_pixel_sse2 (s, d);
+ w--;
+ ps++;
+ if (pm)
+ pm++;
+ }
+
+ /* call prefetch hint to optimize cache load*/
+ cache_prefetch ((__m128i*)ps);
+ cache_prefetch ((__m128i*)pd);
+ maybe_prefetch ((__m128i*)pm);
+
+ while (w >= 4)
+ {
+ /* fill cache line with next memory */
+ cache_prefetch_next ((__m128i*)ps);
+ cache_prefetch_next ((__m128i*)pd);
+ maybe_prefetch_next ((__m128i*)pm);
+
+ xmm_src = combine4 ((__m128i*) ps, (__m128i*) pm);
+ xmm_dst = load_128_aligned ((__m128i*) pd);
+
+ unpack_128_2x128 (xmm_src, &xmm_src_lo, &xmm_src_hi);
+ unpack_128_2x128 (xmm_dst, &xmm_dst_lo, &xmm_dst_hi);
+
+ expand_alpha_2x128 (xmm_src_lo, xmm_src_hi,
+ &xmm_alpha_src_lo, &xmm_alpha_src_hi);
+ expand_alpha_2x128 (xmm_dst_lo, xmm_dst_hi,
+ &xmm_alpha_dst_lo, &xmm_alpha_dst_hi);
+
+ negate_2x128 (xmm_alpha_src_lo, xmm_alpha_src_hi,
+ &xmm_alpha_src_lo, &xmm_alpha_src_hi);
+ negate_2x128 (xmm_alpha_dst_lo, xmm_alpha_dst_hi,
+ &xmm_alpha_dst_lo, &xmm_alpha_dst_hi);
+
+ pix_add_multiply_2x128 (
+ &xmm_src_lo, &xmm_src_hi, &xmm_alpha_dst_lo, &xmm_alpha_dst_hi,
+ &xmm_dst_lo, &xmm_dst_hi, &xmm_alpha_src_lo, &xmm_alpha_src_hi,
+ &xmm_dst_lo, &xmm_dst_hi);
+
+ save_128_aligned (
+ (__m128i*)pd, pack_2x128_128 (xmm_dst_lo, xmm_dst_hi));
+
+ ps += 4;
+ pd += 4;
+ w -= 4;
+ if (pm)
+ pm += 4;
+ }
+
+ while (w)
+ {
+ s = combine1 (ps, pm);
+ d = *pd;
+
+ *pd++ = core_combine_xor_u_pixel_sse2 (s, d);
+ w--;
+ ps++;
+ if (pm)
+ pm++;
+ }
+}
+
+static force_inline void
+core_combine_add_u_sse2 (uint32_t* dst,
+ const uint32_t* src,
+ const uint32_t* mask,
+ int width)
+{
+ int w = width;
+ uint32_t s, d;
+ uint32_t* pd = dst;
+ const uint32_t* ps = src;
+ const uint32_t* pm = mask;
+
+ /* call prefetch hint to optimize cache load*/
+ cache_prefetch ((__m128i*)ps);
+ cache_prefetch ((__m128i*)pd);
+ maybe_prefetch ((__m128i*)pm);
+
+ while (w && (unsigned long)pd & 15)
+ {
+ s = combine1 (ps, pm);
+ d = *pd;
+
+ ps++;
+ if (pm)
+ pm++;
+ *pd++ = _mm_cvtsi64_si32 (
+ _mm_adds_pu8 (_mm_cvtsi32_si64 (s), _mm_cvtsi32_si64 (d)));
+ w--;
+ }
+
+ /* call prefetch hint to optimize cache load*/
+ cache_prefetch ((__m128i*)ps);
+ cache_prefetch ((__m128i*)pd);
+ maybe_prefetch ((__m128i*)pm);
+
+ while (w >= 4)
+ {
+ __m128i s;
+
+ /* fill cache line with next memory */
+ cache_prefetch_next ((__m128i*)ps);
+ cache_prefetch_next ((__m128i*)pd);
+ maybe_prefetch_next ((__m128i*)pm);
+
+ s = combine4 ((__m128i*)ps, (__m128i*)pm);
+
+ save_128_aligned (
+ (__m128i*)pd, _mm_adds_epu8 (s, load_128_aligned ((__m128i*)pd)));
+
+ pd += 4;
+ ps += 4;
+ if (pm)
+ pm += 4;
+ w -= 4;
+ }
+
+ while (w--)
+ {
+ s = combine1 (ps, pm);
+ d = *pd;
+
+ ps++;
+ *pd++ = _mm_cvtsi64_si32 (
+ _mm_adds_pu8 (_mm_cvtsi32_si64 (s), _mm_cvtsi32_si64 (d)));
+ if (pm)
+ pm++;
+ }
+}
+
+static force_inline uint32_t
+core_combine_saturate_u_pixel_sse2 (uint32_t src,
+ uint32_t dst)
+{
+ __m64 ms = unpack_32_1x64 (src);
+ __m64 md = unpack_32_1x64 (dst);
+ uint32_t sa = src >> 24;
+ uint32_t da = ~dst >> 24;
+
+ if (sa > da)
+ {
+ ms = pix_multiply_1x64 (
+ ms, expand_alpha_1x64 (unpack_32_1x64 (DIV_UN8 (da, sa) << 24)));
+ }
+
+ return pack_1x64_32 (_mm_adds_pu16 (md, ms));
+}
+
+static force_inline void
+core_combine_saturate_u_sse2 (uint32_t * pd,
+ const uint32_t *ps,
+ const uint32_t *pm,
+ int w)
+{
+ uint32_t s, d;
+
+ uint32_t pack_cmp;
+ __m128i xmm_src, xmm_dst;
+
+ /* call prefetch hint to optimize cache load*/
+ cache_prefetch ((__m128i*)ps);
+ cache_prefetch ((__m128i*)pd);
+ maybe_prefetch ((__m128i*)pm);
+
+ while (w && (unsigned long)pd & 15)
+ {
+ s = combine1 (ps, pm);
+ d = *pd;
+
+ *pd++ = core_combine_saturate_u_pixel_sse2 (s, d);
+ w--;
+ ps++;
+ if (pm)
+ pm++;
+ }
+
+ /* call prefetch hint to optimize cache load*/
+ cache_prefetch ((__m128i*)ps);
+ cache_prefetch ((__m128i*)pd);
+ maybe_prefetch ((__m128i*)pm);
+
+ while (w >= 4)
+ {
+ /* fill cache line with next memory */
+ cache_prefetch_next ((__m128i*)ps);
+ cache_prefetch_next ((__m128i*)pd);
+ maybe_prefetch_next ((__m128i*)pm);
+
+ xmm_dst = load_128_aligned ((__m128i*)pd);
+ xmm_src = combine4 ((__m128i*)ps, (__m128i*)pm);
+
+ pack_cmp = _mm_movemask_epi8 (
+ _mm_cmpgt_epi32 (
+ _mm_srli_epi32 (xmm_src, 24),
+ _mm_srli_epi32 (_mm_xor_si128 (xmm_dst, mask_ff000000), 24)));
+
+ /* if some alpha src is grater than respective ~alpha dst */
+ if (pack_cmp)
+ {
+ s = combine1 (ps++, pm);
+ d = *pd;
+ *pd++ = core_combine_saturate_u_pixel_sse2 (s, d);
+ if (pm)
+ pm++;
+
+ s = combine1 (ps++, pm);
+ d = *pd;
+ *pd++ = core_combine_saturate_u_pixel_sse2 (s, d);
+ if (pm)
+ pm++;
+
+ s = combine1 (ps++, pm);
+ d = *pd;
+ *pd++ = core_combine_saturate_u_pixel_sse2 (s, d);
+ if (pm)
+ pm++;
+
+ s = combine1 (ps++, pm);
+ d = *pd;
+ *pd++ = core_combine_saturate_u_pixel_sse2 (s, d);
+ if (pm)
+ pm++;
+ }
+ else
+ {
+ save_128_aligned ((__m128i*)pd, _mm_adds_epu8 (xmm_dst, xmm_src));
+
+ pd += 4;
+ ps += 4;
+ if (pm)
+ pm += 4;
+ }
+
+ w -= 4;
+ }
+
+ while (w--)
+ {
+ s = combine1 (ps, pm);
+ d = *pd;
+
+ *pd++ = core_combine_saturate_u_pixel_sse2 (s, d);
+ ps++;
+ if (pm)
+ pm++;
+ }
+}
+
+static force_inline void
+core_combine_src_ca_sse2 (uint32_t* pd,
+ const uint32_t* ps,
+ const uint32_t *pm,
+ int w)
+{
+ uint32_t s, m;
+
+ __m128i xmm_src_lo, xmm_src_hi;
+ __m128i xmm_mask_lo, xmm_mask_hi;
+ __m128i xmm_dst_lo, xmm_dst_hi;
+
+ /* call prefetch hint to optimize cache load*/
+ cache_prefetch ((__m128i*)ps);
+ cache_prefetch ((__m128i*)pd);
+ cache_prefetch ((__m128i*)pm);
+
+ while (w && (unsigned long)pd & 15)
+ {
+ s = *ps++;
+ m = *pm++;
+ *pd++ = pack_1x64_32 (
+ pix_multiply_1x64 (unpack_32_1x64 (s), unpack_32_1x64 (m)));
+ w--;
+ }
+
+ /* call prefetch hint to optimize cache load*/
+ cache_prefetch ((__m128i*)ps);
+ cache_prefetch ((__m128i*)pd);
+ cache_prefetch ((__m128i*)pm);
+
+ while (w >= 4)
+ {
+ /* fill cache line with next memory */
+ cache_prefetch_next ((__m128i*)ps);
+ cache_prefetch_next ((__m128i*)pd);
+ cache_prefetch_next ((__m128i*)pm);
+
+ xmm_src_hi = load_128_unaligned ((__m128i*)ps);
+ xmm_mask_hi = load_128_unaligned ((__m128i*)pm);
+
+ unpack_128_2x128 (xmm_src_hi, &xmm_src_lo, &xmm_src_hi);
+ unpack_128_2x128 (xmm_mask_hi, &xmm_mask_lo, &xmm_mask_hi);
+
+ pix_multiply_2x128 (&xmm_src_lo, &xmm_src_hi,
+ &xmm_mask_lo, &xmm_mask_hi,
+ &xmm_dst_lo, &xmm_dst_hi);
+
+ save_128_aligned (
+ (__m128i*)pd, pack_2x128_128 (xmm_dst_lo, xmm_dst_hi));
+
+ ps += 4;
+ pd += 4;
+ pm += 4;
+ w -= 4;
+ }
+
+ while (w)
+ {
+ s = *ps++;
+ m = *pm++;
+ *pd++ = pack_1x64_32 (
+ pix_multiply_1x64 (unpack_32_1x64 (s), unpack_32_1x64 (m)));
+ w--;
+ }
+}
+
+static force_inline uint32_t
+core_combine_over_ca_pixel_sse2 (uint32_t src,
+ uint32_t mask,
+ uint32_t dst)
+{
+ __m64 s = unpack_32_1x64 (src);
+ __m64 expAlpha = expand_alpha_1x64 (s);
+ __m64 unpk_mask = unpack_32_1x64 (mask);
+ __m64 unpk_dst = unpack_32_1x64 (dst);
+
+ return pack_1x64_32 (in_over_1x64 (&s, &expAlpha, &unpk_mask, &unpk_dst));
+}
+
+static force_inline void
+core_combine_over_ca_sse2 (uint32_t* pd,
+ const uint32_t* ps,
+ const uint32_t *pm,
+ int w)
+{
+ uint32_t s, m, d;
+
+ __m128i xmm_alpha_lo, xmm_alpha_hi;
+ __m128i xmm_src_lo, xmm_src_hi;
+ __m128i xmm_dst_lo, xmm_dst_hi;
+ __m128i xmm_mask_lo, xmm_mask_hi;
+
+ /* call prefetch hint to optimize cache load*/
+ cache_prefetch ((__m128i*)ps);
+ cache_prefetch ((__m128i*)pd);
+ cache_prefetch ((__m128i*)pm);
+
+ while (w && (unsigned long)pd & 15)
+ {
+ s = *ps++;
+ m = *pm++;
+ d = *pd;
+
+ *pd++ = core_combine_over_ca_pixel_sse2 (s, m, d);
+ w--;
+ }
+
+ /* call prefetch hint to optimize cache load*/
+ cache_prefetch ((__m128i*)ps);
+ cache_prefetch ((__m128i*)pd);
+ cache_prefetch ((__m128i*)pm);
+
+ while (w >= 4)
+ {
+ /* fill cache line with next memory */
+ cache_prefetch_next ((__m128i*)ps);
+ cache_prefetch_next ((__m128i*)pd);
+ cache_prefetch_next ((__m128i*)pm);
+
+ xmm_dst_hi = load_128_aligned ((__m128i*)pd);
+ xmm_src_hi = load_128_unaligned ((__m128i*)ps);
+ xmm_mask_hi = load_128_unaligned ((__m128i*)pm);
+
+ unpack_128_2x128 (xmm_dst_hi, &xmm_dst_lo, &xmm_dst_hi);
+ unpack_128_2x128 (xmm_src_hi, &xmm_src_lo, &xmm_src_hi);
+ unpack_128_2x128 (xmm_mask_hi, &xmm_mask_lo, &xmm_mask_hi);
+
+ expand_alpha_2x128 (xmm_src_lo, xmm_src_hi,
+ &xmm_alpha_lo, &xmm_alpha_hi);
+
+ in_over_2x128 (&xmm_src_lo, &xmm_src_hi,
+ &xmm_alpha_lo, &xmm_alpha_hi,
+ &xmm_mask_lo, &xmm_mask_hi,
+ &xmm_dst_lo, &xmm_dst_hi);
+
+ save_128_aligned (
+ (__m128i*)pd, pack_2x128_128 (xmm_dst_lo, xmm_dst_hi));
+
+ ps += 4;
+ pd += 4;
+ pm += 4;
+ w -= 4;
+ }
+
+ while (w)
+ {
+ s = *ps++;
+ m = *pm++;
+ d = *pd;
+
+ *pd++ = core_combine_over_ca_pixel_sse2 (s, m, d);
+ w--;
+ }
+}
+
+static force_inline uint32_t
+core_combine_over_reverse_ca_pixel_sse2 (uint32_t src,
+ uint32_t mask,
+ uint32_t dst)
+{
+ __m64 d = unpack_32_1x64 (dst);
+
+ return pack_1x64_32 (
+ over_1x64 (d, expand_alpha_1x64 (d),
+ pix_multiply_1x64 (unpack_32_1x64 (src),
+ unpack_32_1x64 (mask))));
+}
+
+static force_inline void
+core_combine_over_reverse_ca_sse2 (uint32_t* pd,
+ const uint32_t* ps,
+ const uint32_t *pm,
+ int w)
+{
+ uint32_t s, m, d;
+
+ __m128i xmm_alpha_lo, xmm_alpha_hi;
+ __m128i xmm_src_lo, xmm_src_hi;
+ __m128i xmm_dst_lo, xmm_dst_hi;
+ __m128i xmm_mask_lo, xmm_mask_hi;
+
+ /* call prefetch hint to optimize cache load*/
+ cache_prefetch ((__m128i*)ps);
+ cache_prefetch ((__m128i*)pd);
+ cache_prefetch ((__m128i*)pm);
+
+ while (w && (unsigned long)pd & 15)
+ {
+ s = *ps++;
+ m = *pm++;
+ d = *pd;
+
+ *pd++ = core_combine_over_reverse_ca_pixel_sse2 (s, m, d);
+ w--;
+ }
+
+ /* call prefetch hint to optimize cache load*/
+ cache_prefetch ((__m128i*)ps);
+ cache_prefetch ((__m128i*)pd);
+ cache_prefetch ((__m128i*)pm);
+
+ while (w >= 4)
+ {
+ /* fill cache line with next memory */
+ cache_prefetch_next ((__m128i*)ps);
+ cache_prefetch_next ((__m128i*)pd);
+ cache_prefetch_next ((__m128i*)pm);
+
+ xmm_dst_hi = load_128_aligned ((__m128i*)pd);
+ xmm_src_hi = load_128_unaligned ((__m128i*)ps);
+ xmm_mask_hi = load_128_unaligned ((__m128i*)pm);
+
+ unpack_128_2x128 (xmm_dst_hi, &xmm_dst_lo, &xmm_dst_hi);
+ unpack_128_2x128 (xmm_src_hi, &xmm_src_lo, &xmm_src_hi);
+ unpack_128_2x128 (xmm_mask_hi, &xmm_mask_lo, &xmm_mask_hi);
+
+ expand_alpha_2x128 (xmm_dst_lo, xmm_dst_hi,
+ &xmm_alpha_lo, &xmm_alpha_hi);
+ pix_multiply_2x128 (&xmm_src_lo, &xmm_src_hi,
+ &xmm_mask_lo, &xmm_mask_hi,
+ &xmm_mask_lo, &xmm_mask_hi);
+
+ over_2x128 (&xmm_dst_lo, &xmm_dst_hi,
+ &xmm_alpha_lo, &xmm_alpha_hi,
+ &xmm_mask_lo, &xmm_mask_hi);
+
+ save_128_aligned (
+ (__m128i*)pd, pack_2x128_128 (xmm_mask_lo, xmm_mask_hi));
+
+ ps += 4;
+ pd += 4;
+ pm += 4;
+ w -= 4;
+ }
+
+ while (w)
+ {
+ s = *ps++;
+ m = *pm++;
+ d = *pd;
+
+ *pd++ = core_combine_over_reverse_ca_pixel_sse2 (s, m, d);
+ w--;
+ }
+}
+
+static force_inline void
+core_combine_in_ca_sse2 (uint32_t * pd,
+ const uint32_t *ps,
+ const uint32_t *pm,
+ int w)
+{
+ uint32_t s, m, d;
+
+ __m128i xmm_alpha_lo, xmm_alpha_hi;
+ __m128i xmm_src_lo, xmm_src_hi;
+ __m128i xmm_dst_lo, xmm_dst_hi;
+ __m128i xmm_mask_lo, xmm_mask_hi;
+
+ /* call prefetch hint to optimize cache load*/
+ cache_prefetch ((__m128i*)ps);
+ cache_prefetch ((__m128i*)pd);
+ cache_prefetch ((__m128i*)pm);
+
+ while (w && (unsigned long)pd & 15)
+ {
+ s = *ps++;
+ m = *pm++;
+ d = *pd;
+
+ *pd++ = pack_1x64_32 (
+ pix_multiply_1x64 (
+ pix_multiply_1x64 (unpack_32_1x64 (s), unpack_32_1x64 (m)),
+ expand_alpha_1x64 (unpack_32_1x64 (d))));
+
+ w--;
+ }
+
+ /* call prefetch hint to optimize cache load*/
+ cache_prefetch ((__m128i*)ps);
+ cache_prefetch ((__m128i*)pd);
+ cache_prefetch ((__m128i*)pm);
+
+ while (w >= 4)
+ {
+ /* fill cache line with next memory */
+ cache_prefetch_next ((__m128i*)ps);
+ cache_prefetch_next ((__m128i*)pd);
+ cache_prefetch_next ((__m128i*)pm);
+
+ xmm_dst_hi = load_128_aligned ((__m128i*)pd);
+ xmm_src_hi = load_128_unaligned ((__m128i*)ps);
+ xmm_mask_hi = load_128_unaligned ((__m128i*)pm);
+
+ unpack_128_2x128 (xmm_dst_hi, &xmm_dst_lo, &xmm_dst_hi);
+ unpack_128_2x128 (xmm_src_hi, &xmm_src_lo, &xmm_src_hi);
+ unpack_128_2x128 (xmm_mask_hi, &xmm_mask_lo, &xmm_mask_hi);
+
+ expand_alpha_2x128 (xmm_dst_lo, xmm_dst_hi,
+ &xmm_alpha_lo, &xmm_alpha_hi);
+
+ pix_multiply_2x128 (&xmm_src_lo, &xmm_src_hi,
+ &xmm_mask_lo, &xmm_mask_hi,
+ &xmm_dst_lo, &xmm_dst_hi);
+
+ pix_multiply_2x128 (&xmm_dst_lo, &xmm_dst_hi,
+ &xmm_alpha_lo, &xmm_alpha_hi,
+ &xmm_dst_lo, &xmm_dst_hi);
+
+ save_128_aligned (
+ (__m128i*)pd, pack_2x128_128 (xmm_dst_lo, xmm_dst_hi));
+
+ ps += 4;
+ pd += 4;
+ pm += 4;
+ w -= 4;
+ }
+
+ while (w)
+ {
+ s = *ps++;
+ m = *pm++;
+ d = *pd;
+
+ *pd++ = pack_1x64_32 (
+ pix_multiply_1x64 (
+ pix_multiply_1x64 (
+ unpack_32_1x64 (s), unpack_32_1x64 (m)),
+ expand_alpha_1x64 (unpack_32_1x64 (d))));
+
+ w--;
+ }
+}
+
+static force_inline void
+core_combine_in_reverse_ca_sse2 (uint32_t * pd,
+ const uint32_t *ps,
+ const uint32_t *pm,
+ int w)
+{
+ uint32_t s, m, d;
+
+ __m128i xmm_alpha_lo, xmm_alpha_hi;
+ __m128i xmm_src_lo, xmm_src_hi;
+ __m128i xmm_dst_lo, xmm_dst_hi;
+ __m128i xmm_mask_lo, xmm_mask_hi;
+
+ /* call prefetch hint to optimize cache load*/
+ cache_prefetch ((__m128i*)ps);
+ cache_prefetch ((__m128i*)pd);
+ cache_prefetch ((__m128i*)pm);
+
+ while (w && (unsigned long)pd & 15)
+ {
+ s = *ps++;
+ m = *pm++;
+ d = *pd;
+
+ *pd++ = pack_1x64_32 (
+ pix_multiply_1x64 (
+ unpack_32_1x64 (d),
+ pix_multiply_1x64 (unpack_32_1x64 (m),
+ expand_alpha_1x64 (unpack_32_1x64 (s)))));
+ w--;
+ }
+
+ /* call prefetch hint to optimize cache load*/
+ cache_prefetch ((__m128i*)ps);
+ cache_prefetch ((__m128i*)pd);
+ cache_prefetch ((__m128i*)pm);
+
+ while (w >= 4)
+ {
+ /* fill cache line with next memory */
+ cache_prefetch_next ((__m128i*)ps);
+ cache_prefetch_next ((__m128i*)pd);
+ cache_prefetch_next ((__m128i*)pm);
+
+ xmm_dst_hi = load_128_aligned ((__m128i*)pd);
+ xmm_src_hi = load_128_unaligned ((__m128i*)ps);
+ xmm_mask_hi = load_128_unaligned ((__m128i*)pm);
+
+ unpack_128_2x128 (xmm_dst_hi, &xmm_dst_lo, &xmm_dst_hi);
+ unpack_128_2x128 (xmm_src_hi, &xmm_src_lo, &xmm_src_hi);
+ unpack_128_2x128 (xmm_mask_hi, &xmm_mask_lo, &xmm_mask_hi);
+
+ expand_alpha_2x128 (xmm_src_lo, xmm_src_hi,
+ &xmm_alpha_lo, &xmm_alpha_hi);
+ pix_multiply_2x128 (&xmm_mask_lo, &xmm_mask_hi,
+ &xmm_alpha_lo, &xmm_alpha_hi,
+ &xmm_alpha_lo, &xmm_alpha_hi);
+
+ pix_multiply_2x128 (&xmm_dst_lo, &xmm_dst_hi,
+ &xmm_alpha_lo, &xmm_alpha_hi,
+ &xmm_dst_lo, &xmm_dst_hi);
+
+ save_128_aligned (
+ (__m128i*)pd, pack_2x128_128 (xmm_dst_lo, xmm_dst_hi));
+
+ ps += 4;
+ pd += 4;
+ pm += 4;
+ w -= 4;
+ }
+
+ while (w)
+ {
+ s = *ps++;
+ m = *pm++;
+ d = *pd;
+
+ *pd++ = pack_1x64_32 (
+ pix_multiply_1x64 (
+ unpack_32_1x64 (d),
+ pix_multiply_1x64 (unpack_32_1x64 (m),
+ expand_alpha_1x64 (unpack_32_1x64 (s)))));
+ w--;
+ }
+}
+
+static force_inline void
+core_combine_out_ca_sse2 (uint32_t * pd,
+ const uint32_t *ps,
+ const uint32_t *pm,
+ int w)
+{
+ uint32_t s, m, d;
+
+ __m128i xmm_alpha_lo, xmm_alpha_hi;
+ __m128i xmm_src_lo, xmm_src_hi;
+ __m128i xmm_dst_lo, xmm_dst_hi;
+ __m128i xmm_mask_lo, xmm_mask_hi;
+
+ /* call prefetch hint to optimize cache load*/
+ cache_prefetch ((__m128i*)ps);
+ cache_prefetch ((__m128i*)pd);
+ cache_prefetch ((__m128i*)pm);
+
+ while (w && (unsigned long)pd & 15)
+ {
+ s = *ps++;
+ m = *pm++;
+ d = *pd;
+
+ *pd++ = pack_1x64_32 (
+ pix_multiply_1x64 (
+ pix_multiply_1x64 (
+ unpack_32_1x64 (s), unpack_32_1x64 (m)),
+ negate_1x64 (expand_alpha_1x64 (unpack_32_1x64 (d)))));
+ w--;
+ }
+
+ /* call prefetch hint to optimize cache load*/
+ cache_prefetch ((__m128i*)ps);
+ cache_prefetch ((__m128i*)pd);
+ cache_prefetch ((__m128i*)pm);
+
+ while (w >= 4)
+ {
+ /* fill cache line with next memory */
+ cache_prefetch_next ((__m128i*)ps);
+ cache_prefetch_next ((__m128i*)pd);
+ cache_prefetch_next ((__m128i*)pm);
+
+ xmm_dst_hi = load_128_aligned ((__m128i*)pd);
+ xmm_src_hi = load_128_unaligned ((__m128i*)ps);
+ xmm_mask_hi = load_128_unaligned ((__m128i*)pm);
+
+ unpack_128_2x128 (xmm_dst_hi, &xmm_dst_lo, &xmm_dst_hi);
+ unpack_128_2x128 (xmm_src_hi, &xmm_src_lo, &xmm_src_hi);
+ unpack_128_2x128 (xmm_mask_hi, &xmm_mask_lo, &xmm_mask_hi);
+
+ expand_alpha_2x128 (xmm_dst_lo, xmm_dst_hi,
+ &xmm_alpha_lo, &xmm_alpha_hi);
+ negate_2x128 (xmm_alpha_lo, xmm_alpha_hi,
+ &xmm_alpha_lo, &xmm_alpha_hi);
+
+ pix_multiply_2x128 (&xmm_src_lo, &xmm_src_hi,
+ &xmm_mask_lo, &xmm_mask_hi,
+ &xmm_dst_lo, &xmm_dst_hi);
+ pix_multiply_2x128 (&xmm_dst_lo, &xmm_dst_hi,
+ &xmm_alpha_lo, &xmm_alpha_hi,
+ &xmm_dst_lo, &xmm_dst_hi);
+
+ save_128_aligned (
+ (__m128i*)pd, pack_2x128_128 (xmm_dst_lo, xmm_dst_hi));
+
+ ps += 4;
+ pd += 4;
+ pm += 4;
+ w -= 4;
+ }
+
+ while (w)
+ {
+ s = *ps++;
+ m = *pm++;
+ d = *pd;
+
+ *pd++ = pack_1x64_32 (
+ pix_multiply_1x64 (
+ pix_multiply_1x64 (
+ unpack_32_1x64 (s), unpack_32_1x64 (m)),
+ negate_1x64 (expand_alpha_1x64 (unpack_32_1x64 (d)))));
+
+ w--;
+ }
+}
+
+static force_inline void
+core_combine_out_reverse_ca_sse2 (uint32_t * pd,
+ const uint32_t *ps,
+ const uint32_t *pm,
+ int w)
+{
+ uint32_t s, m, d;
+
+ __m128i xmm_alpha_lo, xmm_alpha_hi;
+ __m128i xmm_src_lo, xmm_src_hi;
+ __m128i xmm_dst_lo, xmm_dst_hi;
+ __m128i xmm_mask_lo, xmm_mask_hi;
+
+ /* call prefetch hint to optimize cache load*/
+ cache_prefetch ((__m128i*)ps);
+ cache_prefetch ((__m128i*)pd);
+ cache_prefetch ((__m128i*)pm);
+
+ while (w && (unsigned long)pd & 15)
+ {
+ s = *ps++;
+ m = *pm++;
+ d = *pd;
+
+ *pd++ = pack_1x64_32 (
+ pix_multiply_1x64 (
+ unpack_32_1x64 (d),
+ negate_1x64 (pix_multiply_1x64 (
+ unpack_32_1x64 (m),
+ expand_alpha_1x64 (unpack_32_1x64 (s))))));
+ w--;
+ }
+
+ /* call prefetch hint to optimize cache load*/
+ cache_prefetch ((__m128i*)ps);
+ cache_prefetch ((__m128i*)pd);
+ cache_prefetch ((__m128i*)pm);
+
+ while (w >= 4)
+ {
+ /* fill cache line with next memory */
+ cache_prefetch_next ((__m128i*)ps);
+ cache_prefetch_next ((__m128i*)pd);
+ cache_prefetch_next ((__m128i*)pm);
+
+ xmm_dst_hi = load_128_aligned ((__m128i*)pd);
+ xmm_src_hi = load_128_unaligned ((__m128i*)ps);
+ xmm_mask_hi = load_128_unaligned ((__m128i*)pm);
+
+ unpack_128_2x128 (xmm_dst_hi, &xmm_dst_lo, &xmm_dst_hi);
+ unpack_128_2x128 (xmm_src_hi, &xmm_src_lo, &xmm_src_hi);
+ unpack_128_2x128 (xmm_mask_hi, &xmm_mask_lo, &xmm_mask_hi);
+
+ expand_alpha_2x128 (xmm_src_lo, xmm_src_hi,
+ &xmm_alpha_lo, &xmm_alpha_hi);
+
+ pix_multiply_2x128 (&xmm_mask_lo, &xmm_mask_hi,
+ &xmm_alpha_lo, &xmm_alpha_hi,
+ &xmm_mask_lo, &xmm_mask_hi);
+
+ negate_2x128 (xmm_mask_lo, xmm_mask_hi,
+ &xmm_mask_lo, &xmm_mask_hi);
+
+ pix_multiply_2x128 (&xmm_dst_lo, &xmm_dst_hi,
+ &xmm_mask_lo, &xmm_mask_hi,
+ &xmm_dst_lo, &xmm_dst_hi);
+
+ save_128_aligned (
+ (__m128i*)pd, pack_2x128_128 (xmm_dst_lo, xmm_dst_hi));
+
+ ps += 4;
+ pd += 4;
+ pm += 4;
+ w -= 4;
+ }
+
+ while (w)
+ {
+ s = *ps++;
+ m = *pm++;
+ d = *pd;
+
+ *pd++ = pack_1x64_32 (
+ pix_multiply_1x64 (
+ unpack_32_1x64 (d),
+ negate_1x64 (pix_multiply_1x64 (
+ unpack_32_1x64 (m),
+ expand_alpha_1x64 (unpack_32_1x64 (s))))));
+ w--;
+ }
+}
+
+static force_inline uint32_t
+core_combine_atop_ca_pixel_sse2 (uint32_t src,
+ uint32_t mask,
+ uint32_t dst)
+{
+ __m64 m = unpack_32_1x64 (mask);
+ __m64 s = unpack_32_1x64 (src);
+ __m64 d = unpack_32_1x64 (dst);
+ __m64 sa = expand_alpha_1x64 (s);
+ __m64 da = expand_alpha_1x64 (d);
+
+ s = pix_multiply_1x64 (s, m);
+ m = negate_1x64 (pix_multiply_1x64 (m, sa));
+
+ return pack_1x64_32 (pix_add_multiply_1x64 (&d, &m, &s, &da));
+}
+
+static force_inline void
+core_combine_atop_ca_sse2 (uint32_t * pd,
+ const uint32_t *ps,
+ const uint32_t *pm,
+ int w)
+{
+ uint32_t s, m, d;
+
+ __m128i xmm_src_lo, xmm_src_hi;
+ __m128i xmm_dst_lo, xmm_dst_hi;
+ __m128i xmm_alpha_src_lo, xmm_alpha_src_hi;
+ __m128i xmm_alpha_dst_lo, xmm_alpha_dst_hi;
+ __m128i xmm_mask_lo, xmm_mask_hi;
+
+ /* call prefetch hint to optimize cache load*/
+ cache_prefetch ((__m128i*)ps);
+ cache_prefetch ((__m128i*)pd);
+ cache_prefetch ((__m128i*)pm);
+
+ while (w && (unsigned long)pd & 15)
+ {
+ s = *ps++;
+ m = *pm++;
+ d = *pd;
+
+ *pd++ = core_combine_atop_ca_pixel_sse2 (s, m, d);
+ w--;
+ }
+
+ /* call prefetch hint to optimize cache load*/
+ cache_prefetch ((__m128i*)ps);
+ cache_prefetch ((__m128i*)pd);
+ cache_prefetch ((__m128i*)pm);
+
+ while (w >= 4)
+ {
+ /* fill cache line with next memory */
+ cache_prefetch_next ((__m128i*)ps);
+ cache_prefetch_next ((__m128i*)pd);
+ cache_prefetch_next ((__m128i*)pm);
+
+ xmm_dst_hi = load_128_aligned ((__m128i*)pd);
+ xmm_src_hi = load_128_unaligned ((__m128i*)ps);
+ xmm_mask_hi = load_128_unaligned ((__m128i*)pm);
+
+ unpack_128_2x128 (xmm_dst_hi, &xmm_dst_lo, &xmm_dst_hi);
+ unpack_128_2x128 (xmm_src_hi, &xmm_src_lo, &xmm_src_hi);
+ unpack_128_2x128 (xmm_mask_hi, &xmm_mask_lo, &xmm_mask_hi);
+
+ expand_alpha_2x128 (xmm_src_lo, xmm_src_hi,
+ &xmm_alpha_src_lo, &xmm_alpha_src_hi);
+ expand_alpha_2x128 (xmm_dst_lo, xmm_dst_hi,
+ &xmm_alpha_dst_lo, &xmm_alpha_dst_hi);
+
+ pix_multiply_2x128 (&xmm_src_lo, &xmm_src_hi,
+ &xmm_mask_lo, &xmm_mask_hi,
+ &xmm_src_lo, &xmm_src_hi);
+ pix_multiply_2x128 (&xmm_mask_lo, &xmm_mask_hi,
+ &xmm_alpha_src_lo, &xmm_alpha_src_hi,
+ &xmm_mask_lo, &xmm_mask_hi);
+
+ negate_2x128 (xmm_mask_lo, xmm_mask_hi, &xmm_mask_lo, &xmm_mask_hi);
+
+ pix_add_multiply_2x128 (
+ &xmm_dst_lo, &xmm_dst_hi, &xmm_mask_lo, &xmm_mask_hi,
+ &xmm_src_lo, &xmm_src_hi, &xmm_alpha_dst_lo, &xmm_alpha_dst_hi,
+ &xmm_dst_lo, &xmm_dst_hi);
+
+ save_128_aligned (
+ (__m128i*)pd, pack_2x128_128 (xmm_dst_lo, xmm_dst_hi));
+
+ ps += 4;
+ pd += 4;
+ pm += 4;
+ w -= 4;
+ }
+
+ while (w)
+ {
+ s = *ps++;
+ m = *pm++;
+ d = *pd;
+
+ *pd++ = core_combine_atop_ca_pixel_sse2 (s, m, d);
+ w--;
+ }
+}
+
+static force_inline uint32_t
+core_combine_reverse_atop_ca_pixel_sse2 (uint32_t src,
+ uint32_t mask,
+ uint32_t dst)
+{
+ __m64 m = unpack_32_1x64 (mask);
+ __m64 s = unpack_32_1x64 (src);
+ __m64 d = unpack_32_1x64 (dst);
+
+ __m64 da = negate_1x64 (expand_alpha_1x64 (d));
+ __m64 sa = expand_alpha_1x64 (s);
+
+ s = pix_multiply_1x64 (s, m);
+ m = pix_multiply_1x64 (m, sa);
+
+ return pack_1x64_32 (pix_add_multiply_1x64 (&d, &m, &s, &da));
+}
+
+static force_inline void
+core_combine_reverse_atop_ca_sse2 (uint32_t * pd,
+ const uint32_t *ps,
+ const uint32_t *pm,
+ int w)
+{
+ uint32_t s, m, d;
+
+ __m128i xmm_src_lo, xmm_src_hi;
+ __m128i xmm_dst_lo, xmm_dst_hi;
+ __m128i xmm_alpha_src_lo, xmm_alpha_src_hi;
+ __m128i xmm_alpha_dst_lo, xmm_alpha_dst_hi;
+ __m128i xmm_mask_lo, xmm_mask_hi;
+
+ /* call prefetch hint to optimize cache load*/
+ cache_prefetch ((__m128i*)ps);
+ cache_prefetch ((__m128i*)pd);
+ cache_prefetch ((__m128i*)pm);
+
+ while (w && (unsigned long)pd & 15)
+ {
+ s = *ps++;
+ m = *pm++;
+ d = *pd;
+
+ *pd++ = core_combine_reverse_atop_ca_pixel_sse2 (s, m, d);
+ w--;
+ }
+
+ /* call prefetch hint to optimize cache load*/
+ cache_prefetch ((__m128i*)ps);
+ cache_prefetch ((__m128i*)pd);
+ cache_prefetch ((__m128i*)pm);
+
+ while (w >= 4)
+ {
+ /* fill cache line with next memory */
+ cache_prefetch_next ((__m128i*)ps);
+ cache_prefetch_next ((__m128i*)pd);
+ cache_prefetch_next ((__m128i*)pm);
+
+ xmm_dst_hi = load_128_aligned ((__m128i*)pd);
+ xmm_src_hi = load_128_unaligned ((__m128i*)ps);
+ xmm_mask_hi = load_128_unaligned ((__m128i*)pm);
+
+ unpack_128_2x128 (xmm_dst_hi, &xmm_dst_lo, &xmm_dst_hi);
+ unpack_128_2x128 (xmm_src_hi, &xmm_src_lo, &xmm_src_hi);
+ unpack_128_2x128 (xmm_mask_hi, &xmm_mask_lo, &xmm_mask_hi);
+
+ expand_alpha_2x128 (xmm_src_lo, xmm_src_hi,
+ &xmm_alpha_src_lo, &xmm_alpha_src_hi);
+ expand_alpha_2x128 (xmm_dst_lo, xmm_dst_hi,
+ &xmm_alpha_dst_lo, &xmm_alpha_dst_hi);
+
+ pix_multiply_2x128 (&xmm_src_lo, &xmm_src_hi,
+ &xmm_mask_lo, &xmm_mask_hi,
+ &xmm_src_lo, &xmm_src_hi);
+ pix_multiply_2x128 (&xmm_mask_lo, &xmm_mask_hi,
+ &xmm_alpha_src_lo, &xmm_alpha_src_hi,
+ &xmm_mask_lo, &xmm_mask_hi);
+
+ negate_2x128 (xmm_alpha_dst_lo, xmm_alpha_dst_hi,
+ &xmm_alpha_dst_lo, &xmm_alpha_dst_hi);
+
+ pix_add_multiply_2x128 (
+ &xmm_dst_lo, &xmm_dst_hi, &xmm_mask_lo, &xmm_mask_hi,
+ &xmm_src_lo, &xmm_src_hi, &xmm_alpha_dst_lo, &xmm_alpha_dst_hi,
+ &xmm_dst_lo, &xmm_dst_hi);
+
+ save_128_aligned (
+ (__m128i*)pd, pack_2x128_128 (xmm_dst_lo, xmm_dst_hi));
+
+ ps += 4;
+ pd += 4;
+ pm += 4;
+ w -= 4;
+ }
+
+ while (w)
+ {
+ s = *ps++;
+ m = *pm++;
+ d = *pd;
+
+ *pd++ = core_combine_reverse_atop_ca_pixel_sse2 (s, m, d);
+ w--;
+ }
+}
+
+static force_inline uint32_t
+core_combine_xor_ca_pixel_sse2 (uint32_t src,
+ uint32_t mask,
+ uint32_t dst)
+{
+ __m64 a = unpack_32_1x64 (mask);
+ __m64 s = unpack_32_1x64 (src);
+ __m64 d = unpack_32_1x64 (dst);
+
+ __m64 alpha_dst = negate_1x64 (pix_multiply_1x64 (
+ a, expand_alpha_1x64 (s)));
+ __m64 dest = pix_multiply_1x64 (s, a);
+ __m64 alpha_src = negate_1x64 (expand_alpha_1x64 (d));
+
+ return pack_1x64_32 (pix_add_multiply_1x64 (&d,
+ &alpha_dst,
+ &dest,
+ &alpha_src));
+}
+
+static force_inline void
+core_combine_xor_ca_sse2 (uint32_t * pd,
+ const uint32_t *ps,
+ const uint32_t *pm,
+ int w)
+{
+ uint32_t s, m, d;
+
+ __m128i xmm_src_lo, xmm_src_hi;
+ __m128i xmm_dst_lo, xmm_dst_hi;
+ __m128i xmm_alpha_src_lo, xmm_alpha_src_hi;
+ __m128i xmm_alpha_dst_lo, xmm_alpha_dst_hi;
+ __m128i xmm_mask_lo, xmm_mask_hi;
+
+ /* call prefetch hint to optimize cache load*/
+ cache_prefetch ((__m128i*)ps);
+ cache_prefetch ((__m128i*)pd);
+ cache_prefetch ((__m128i*)pm);
+
+ while (w && (unsigned long)pd & 15)
+ {
+ s = *ps++;
+ m = *pm++;
+ d = *pd;
+
+ *pd++ = core_combine_xor_ca_pixel_sse2 (s, m, d);
+ w--;
+ }
+
+ /* call prefetch hint to optimize cache load*/
+ cache_prefetch ((__m128i*)ps);
+ cache_prefetch ((__m128i*)pd);
+ cache_prefetch ((__m128i*)pm);
+
+ while (w >= 4)
+ {
+ /* fill cache line with next memory */
+ cache_prefetch_next ((__m128i*)ps);
+ cache_prefetch_next ((__m128i*)pd);
+ cache_prefetch_next ((__m128i*)pm);
+
+ xmm_dst_hi = load_128_aligned ((__m128i*)pd);
+ xmm_src_hi = load_128_unaligned ((__m128i*)ps);
+ xmm_mask_hi = load_128_unaligned ((__m128i*)pm);
+
+ unpack_128_2x128 (xmm_dst_hi, &xmm_dst_lo, &xmm_dst_hi);
+ unpack_128_2x128 (xmm_src_hi, &xmm_src_lo, &xmm_src_hi);
+ unpack_128_2x128 (xmm_mask_hi, &xmm_mask_lo, &xmm_mask_hi);
+
+ expand_alpha_2x128 (xmm_src_lo, xmm_src_hi,
+ &xmm_alpha_src_lo, &xmm_alpha_src_hi);
+ expand_alpha_2x128 (xmm_dst_lo, xmm_dst_hi,
+ &xmm_alpha_dst_lo, &xmm_alpha_dst_hi);
+
+ pix_multiply_2x128 (&xmm_src_lo, &xmm_src_hi,
+ &xmm_mask_lo, &xmm_mask_hi,
+ &xmm_src_lo, &xmm_src_hi);
+ pix_multiply_2x128 (&xmm_mask_lo, &xmm_mask_hi,
+ &xmm_alpha_src_lo, &xmm_alpha_src_hi,
+ &xmm_mask_lo, &xmm_mask_hi);
+
+ negate_2x128 (xmm_alpha_dst_lo, xmm_alpha_dst_hi,
+ &xmm_alpha_dst_lo, &xmm_alpha_dst_hi);
+ negate_2x128 (xmm_mask_lo, xmm_mask_hi,
+ &xmm_mask_lo, &xmm_mask_hi);
+
+ pix_add_multiply_2x128 (
+ &xmm_dst_lo, &xmm_dst_hi, &xmm_mask_lo, &xmm_mask_hi,
+ &xmm_src_lo, &xmm_src_hi, &xmm_alpha_dst_lo, &xmm_alpha_dst_hi,
+ &xmm_dst_lo, &xmm_dst_hi);
+
+ save_128_aligned (
+ (__m128i*)pd, pack_2x128_128 (xmm_dst_lo, xmm_dst_hi));
+
+ ps += 4;
+ pd += 4;
+ pm += 4;
+ w -= 4;
+ }
+
+ while (w)
+ {
+ s = *ps++;
+ m = *pm++;
+ d = *pd;
+
+ *pd++ = core_combine_xor_ca_pixel_sse2 (s, m, d);
+ w--;
+ }
+}
+
+static force_inline void
+core_combine_add_ca_sse2 (uint32_t * pd,
+ const uint32_t *ps,
+ const uint32_t *pm,
+ int w)
+{
+ uint32_t s, m, d;
+
+ __m128i xmm_src_lo, xmm_src_hi;
+ __m128i xmm_dst_lo, xmm_dst_hi;
+ __m128i xmm_mask_lo, xmm_mask_hi;
+
+ /* call prefetch hint to optimize cache load*/
+ cache_prefetch ((__m128i*)ps);
+ cache_prefetch ((__m128i*)pd);
+ cache_prefetch ((__m128i*)pm);
+
+ while (w && (unsigned long)pd & 15)
+ {
+ s = *ps++;
+ m = *pm++;
+ d = *pd;
+
+ *pd++ = pack_1x64_32 (
+ _mm_adds_pu8 (pix_multiply_1x64 (unpack_32_1x64 (s),
+ unpack_32_1x64 (m)),
+ unpack_32_1x64 (d)));
+ w--;
+ }
+
+ /* call prefetch hint to optimize cache load*/
+ cache_prefetch ((__m128i*)ps);
+ cache_prefetch ((__m128i*)pd);
+ cache_prefetch ((__m128i*)pm);
+
+ while (w >= 4)
+ {
+ /* fill cache line with next memory */
+ cache_prefetch_next ((__m128i*)ps);
+ cache_prefetch_next ((__m128i*)pd);
+ cache_prefetch_next ((__m128i*)pm);
+
+ xmm_src_hi = load_128_unaligned ((__m128i*)ps);
+ xmm_mask_hi = load_128_unaligned ((__m128i*)pm);
+ xmm_dst_hi = load_128_aligned ((__m128i*)pd);
+
+ unpack_128_2x128 (xmm_src_hi, &xmm_src_lo, &xmm_src_hi);
+ unpack_128_2x128 (xmm_mask_hi, &xmm_mask_lo, &xmm_mask_hi);
+ unpack_128_2x128 (xmm_dst_hi, &xmm_dst_lo, &xmm_dst_hi);
+
+ pix_multiply_2x128 (&xmm_src_lo, &xmm_src_hi,
+ &xmm_mask_lo, &xmm_mask_hi,
+ &xmm_src_lo, &xmm_src_hi);
+
+ save_128_aligned (
+ (__m128i*)pd, pack_2x128_128 (
+ _mm_adds_epu8 (xmm_src_lo, xmm_dst_lo),
+ _mm_adds_epu8 (xmm_src_hi, xmm_dst_hi)));
+
+ ps += 4;
+ pd += 4;
+ pm += 4;
+ w -= 4;
+ }
+
+ while (w)
+ {
+ s = *ps++;
+ m = *pm++;
+ d = *pd;
+
+ *pd++ = pack_1x64_32 (
+ _mm_adds_pu8 (pix_multiply_1x64 (unpack_32_1x64 (s),
+ unpack_32_1x64 (m)),
+ unpack_32_1x64 (d)));
+ w--;
+ }
+}
+
+/* ---------------------------------------------------
+ * fb_compose_setup_sSE2
+ */
+static force_inline __m64
+create_mask_16_64 (uint16_t mask)
+{
+ return _mm_set1_pi16 (mask);
+}
+
+static force_inline __m128i
+create_mask_16_128 (uint16_t mask)
+{
+ return _mm_set1_epi16 (mask);
+}
+
+static force_inline __m64
+create_mask_2x32_64 (uint32_t mask0,
+ uint32_t mask1)
+{
+ return _mm_set_pi32 (mask0, mask1);
+}
+
+/* Work around a code generation bug in Sun Studio 12. */
+#if defined(__SUNPRO_C) && (__SUNPRO_C >= 0x590)
+# define create_mask_2x32_128(mask0, mask1) \
+ (_mm_set_epi32 ((mask0), (mask1), (mask0), (mask1)))
+#else
+static force_inline __m128i
+create_mask_2x32_128 (uint32_t mask0,
+ uint32_t mask1)
+{
+ return _mm_set_epi32 (mask0, mask1, mask0, mask1);
+}
+#endif
+
+/* SSE2 code patch for fbcompose.c */
+
+static void
+sse2_combine_over_u (pixman_implementation_t *imp,
+ pixman_op_t op,
+ uint32_t * dst,
+ const uint32_t * src,
+ const uint32_t * mask,
+ int width)
+{
+ core_combine_over_u_sse2 (dst, src, mask, width);
+ _mm_empty ();
+}
+
+static void
+sse2_combine_over_reverse_u (pixman_implementation_t *imp,
+ pixman_op_t op,
+ uint32_t * dst,
+ const uint32_t * src,
+ const uint32_t * mask,
+ int width)
+{
+ core_combine_over_reverse_u_sse2 (dst, src, mask, width);
+ _mm_empty ();
+}
+
+static void
+sse2_combine_in_u (pixman_implementation_t *imp,
+ pixman_op_t op,
+ uint32_t * dst,
+ const uint32_t * src,
+ const uint32_t * mask,
+ int width)
+{
+ core_combine_in_u_sse2 (dst, src, mask, width);
+ _mm_empty ();
+}
+
+static void
+sse2_combine_in_reverse_u (pixman_implementation_t *imp,
+ pixman_op_t op,
+ uint32_t * dst,
+ const uint32_t * src,
+ const uint32_t * mask,
+ int width)
+{
+ core_combine_reverse_in_u_sse2 (dst, src, mask, width);
+ _mm_empty ();
+}
+
+static void
+sse2_combine_out_u (pixman_implementation_t *imp,
+ pixman_op_t op,
+ uint32_t * dst,
+ const uint32_t * src,
+ const uint32_t * mask,
+ int width)
+{
+ core_combine_out_u_sse2 (dst, src, mask, width);
+ _mm_empty ();
+}
+
+static void
+sse2_combine_out_reverse_u (pixman_implementation_t *imp,
+ pixman_op_t op,
+ uint32_t * dst,
+ const uint32_t * src,
+ const uint32_t * mask,
+ int width)
+{
+ core_combine_reverse_out_u_sse2 (dst, src, mask, width);
+ _mm_empty ();
+}
+
+static void
+sse2_combine_atop_u (pixman_implementation_t *imp,
+ pixman_op_t op,
+ uint32_t * dst,
+ const uint32_t * src,
+ const uint32_t * mask,
+ int width)
+{
+ core_combine_atop_u_sse2 (dst, src, mask, width);
+ _mm_empty ();
+}
+
+static void
+sse2_combine_atop_reverse_u (pixman_implementation_t *imp,
+ pixman_op_t op,
+ uint32_t * dst,
+ const uint32_t * src,
+ const uint32_t * mask,
+ int width)
+{
+ core_combine_reverse_atop_u_sse2 (dst, src, mask, width);
+ _mm_empty ();
+}
+
+static void
+sse2_combine_xor_u (pixman_implementation_t *imp,
+ pixman_op_t op,
+ uint32_t * dst,
+ const uint32_t * src,
+ const uint32_t * mask,
+ int width)
+{
+ core_combine_xor_u_sse2 (dst, src, mask, width);
+ _mm_empty ();
+}
+
+static void
+sse2_combine_add_u (pixman_implementation_t *imp,
+ pixman_op_t op,
+ uint32_t * dst,
+ const uint32_t * src,
+ const uint32_t * mask,
+ int width)
+{
+ core_combine_add_u_sse2 (dst, src, mask, width);
+ _mm_empty ();
+}
+
+static void
+sse2_combine_saturate_u (pixman_implementation_t *imp,
+ pixman_op_t op,
+ uint32_t * dst,
+ const uint32_t * src,
+ const uint32_t * mask,
+ int width)
+{
+ core_combine_saturate_u_sse2 (dst, src, mask, width);
+ _mm_empty ();
+}
+
+static void
+sse2_combine_src_ca (pixman_implementation_t *imp,
+ pixman_op_t op,
+ uint32_t * dst,
+ const uint32_t * src,
+ const uint32_t * mask,
+ int width)
+{
+ core_combine_src_ca_sse2 (dst, src, mask, width);
+ _mm_empty ();
+}
+
+static void
+sse2_combine_over_ca (pixman_implementation_t *imp,
+ pixman_op_t op,
+ uint32_t * dst,
+ const uint32_t * src,
+ const uint32_t * mask,
+ int width)
+{
+ core_combine_over_ca_sse2 (dst, src, mask, width);
+ _mm_empty ();
+}
+
+static void
+sse2_combine_over_reverse_ca (pixman_implementation_t *imp,
+ pixman_op_t op,
+ uint32_t * dst,
+ const uint32_t * src,
+ const uint32_t * mask,
+ int width)
+{
+ core_combine_over_reverse_ca_sse2 (dst, src, mask, width);
+ _mm_empty ();
+}
+
+static void
+sse2_combine_in_ca (pixman_implementation_t *imp,
+ pixman_op_t op,
+ uint32_t * dst,
+ const uint32_t * src,
+ const uint32_t * mask,
+ int width)
+{
+ core_combine_in_ca_sse2 (dst, src, mask, width);
+ _mm_empty ();
+}
+
+static void
+sse2_combine_in_reverse_ca (pixman_implementation_t *imp,
+ pixman_op_t op,
+ uint32_t * dst,
+ const uint32_t * src,
+ const uint32_t * mask,
+ int width)
+{
+ core_combine_in_reverse_ca_sse2 (dst, src, mask, width);
+ _mm_empty ();
+}
+
+static void
+sse2_combine_out_ca (pixman_implementation_t *imp,
+ pixman_op_t op,
+ uint32_t * dst,
+ const uint32_t * src,
+ const uint32_t * mask,
+ int width)
+{
+ core_combine_out_ca_sse2 (dst, src, mask, width);
+ _mm_empty ();
+}
+
+static void
+sse2_combine_out_reverse_ca (pixman_implementation_t *imp,
+ pixman_op_t op,
+ uint32_t * dst,
+ const uint32_t * src,
+ const uint32_t * mask,
+ int width)
+{
+ core_combine_out_reverse_ca_sse2 (dst, src, mask, width);
+ _mm_empty ();
+}
+
+static void
+sse2_combine_atop_ca (pixman_implementation_t *imp,
+ pixman_op_t op,
+ uint32_t * dst,
+ const uint32_t * src,
+ const uint32_t * mask,
+ int width)
+{
+ core_combine_atop_ca_sse2 (dst, src, mask, width);
+ _mm_empty ();
+}
+
+static void
+sse2_combine_atop_reverse_ca (pixman_implementation_t *imp,
+ pixman_op_t op,
+ uint32_t * dst,
+ const uint32_t * src,
+ const uint32_t * mask,
+ int width)
+{
+ core_combine_reverse_atop_ca_sse2 (dst, src, mask, width);
+ _mm_empty ();
+}
+
+static void
+sse2_combine_xor_ca (pixman_implementation_t *imp,
+ pixman_op_t op,
+ uint32_t * dst,
+ const uint32_t * src,
+ const uint32_t * mask,
+ int width)
+{
+ core_combine_xor_ca_sse2 (dst, src, mask, width);
+ _mm_empty ();
+}
+
+static void
+sse2_combine_add_ca (pixman_implementation_t *imp,
+ pixman_op_t op,
+ uint32_t * dst,
+ const uint32_t * src,
+ const uint32_t * mask,
+ int width)
+{
+ core_combine_add_ca_sse2 (dst, src, mask, width);
+ _mm_empty ();
+}
+
+/* -------------------------------------------------------------------
+ * composite_over_n_8888
+ */
+
+static void
+sse2_composite_over_n_8888 (pixman_implementation_t *imp,
+ pixman_op_t op,
+ pixman_image_t * src_image,
+ pixman_image_t * mask_image,
+ pixman_image_t * dst_image,
+ int32_t src_x,
+ int32_t src_y,
+ int32_t mask_x,
+ int32_t mask_y,
+ int32_t dest_x,
+ int32_t dest_y,
+ int32_t width,
+ int32_t height)
+{
+ uint32_t src;
+ uint32_t *dst_line, *dst, d;
+ int32_t w;
+ int dst_stride;
+ __m128i xmm_src, xmm_alpha;
+ __m128i xmm_dst, xmm_dst_lo, xmm_dst_hi;
+
+ src = _pixman_image_get_solid (src_image, dst_image->bits.format);
+
+ if (src == 0)
+ return;
+
+ PIXMAN_IMAGE_GET_LINE (
+ dst_image, dest_x, dest_y, uint32_t, dst_stride, dst_line, 1);
+
+ xmm_src = expand_pixel_32_1x128 (src);
+ xmm_alpha = expand_alpha_1x128 (xmm_src);
+
+ while (height--)
+ {
+ dst = dst_line;
+
+ /* call prefetch hint to optimize cache load*/
+ cache_prefetch ((__m128i*)dst);
+
+ dst_line += dst_stride;
+ w = width;
+
+ while (w && (unsigned long)dst & 15)
+ {
+ d = *dst;
+ *dst++ = pack_1x64_32 (over_1x64 (_mm_movepi64_pi64 (xmm_src),
+ _mm_movepi64_pi64 (xmm_alpha),
+ unpack_32_1x64 (d)));
+ w--;
+ }
+
+ cache_prefetch ((__m128i*)dst);
+
+ while (w >= 4)
+ {
+ /* fill cache line with next memory */
+ cache_prefetch_next ((__m128i*)dst);
+
+ xmm_dst = load_128_aligned ((__m128i*)dst);
+
+ unpack_128_2x128 (xmm_dst, &xmm_dst_lo, &xmm_dst_hi);
+
+ over_2x128 (&xmm_src, &xmm_src,
+ &xmm_alpha, &xmm_alpha,
+ &xmm_dst_lo, &xmm_dst_hi);
+
+ /* rebuid the 4 pixel data and save*/
+ save_128_aligned (
+ (__m128i*)dst, pack_2x128_128 (xmm_dst_lo, xmm_dst_hi));
+
+ w -= 4;
+ dst += 4;
+ }
+
+ while (w)
+ {
+ d = *dst;
+ *dst++ = pack_1x64_32 (over_1x64 (_mm_movepi64_pi64 (xmm_src),
+ _mm_movepi64_pi64 (xmm_alpha),
+ unpack_32_1x64 (d)));
+ w--;
+ }
+
+ }
+ _mm_empty ();
+}
+
+/* ---------------------------------------------------------------------
+ * composite_over_n_0565
+ */
+static void
+sse2_composite_over_n_0565 (pixman_implementation_t *imp,
+ pixman_op_t op,
+ pixman_image_t * src_image,
+ pixman_image_t * mask_image,
+ pixman_image_t * dst_image,
+ int32_t src_x,
+ int32_t src_y,
+ int32_t mask_x,
+ int32_t mask_y,
+ int32_t dest_x,
+ int32_t dest_y,
+ int32_t width,
+ int32_t height)
+{
+ uint32_t src;
+ uint16_t *dst_line, *dst, d;
+ int32_t w;
+ int dst_stride;
+ __m128i xmm_src, xmm_alpha;
+ __m128i xmm_dst, xmm_dst0, xmm_dst1, xmm_dst2, xmm_dst3;
+
+ src = _pixman_image_get_solid (src_image, dst_image->bits.format);
+
+ if (src == 0)
+ return;
+
+ PIXMAN_IMAGE_GET_LINE (
+ dst_image, dest_x, dest_y, uint16_t, dst_stride, dst_line, 1);
+
+ xmm_src = expand_pixel_32_1x128 (src);
+ xmm_alpha = expand_alpha_1x128 (xmm_src);
+
+ while (height--)
+ {
+ dst = dst_line;
+
+ /* call prefetch hint to optimize cache load*/
+ cache_prefetch ((__m128i*)dst);
+
+ dst_line += dst_stride;
+ w = width;
+
+ while (w && (unsigned long)dst & 15)
+ {
+ d = *dst;
+
+ *dst++ = pack_565_32_16 (
+ pack_1x64_32 (over_1x64 (_mm_movepi64_pi64 (xmm_src),
+ _mm_movepi64_pi64 (xmm_alpha),
+ expand565_16_1x64 (d))));
+ w--;
+ }
+
+ /* call prefetch hint to optimize cache load*/
+ cache_prefetch ((__m128i*)dst);
+
+ while (w >= 8)
+ {
+ /* fill cache line with next memory */
+ cache_prefetch_next ((__m128i*)dst);
+
+ xmm_dst = load_128_aligned ((__m128i*)dst);
+
+ unpack_565_128_4x128 (xmm_dst,
+ &xmm_dst0, &xmm_dst1, &xmm_dst2, &xmm_dst3);
+
+ over_2x128 (&xmm_src, &xmm_src,
+ &xmm_alpha, &xmm_alpha,
+ &xmm_dst0, &xmm_dst1);
+ over_2x128 (&xmm_src, &xmm_src,
+ &xmm_alpha, &xmm_alpha,
+ &xmm_dst2, &xmm_dst3);
+
+ xmm_dst = pack_565_4x128_128 (
+ &xmm_dst0, &xmm_dst1, &xmm_dst2, &xmm_dst3);
+
+ save_128_aligned ((__m128i*)dst, xmm_dst);
+
+ dst += 8;
+ w -= 8;
+ }
+
+ while (w--)
+ {
+ d = *dst;
+ *dst++ = pack_565_32_16 (
+ pack_1x64_32 (over_1x64 (_mm_movepi64_pi64 (xmm_src),
+ _mm_movepi64_pi64 (xmm_alpha),
+ expand565_16_1x64 (d))));
+ }
+ }
+
+ _mm_empty ();
+}
+
+/* ------------------------------
+ * composite_add_n_8888_8888_ca
+ */
+static void
+sse2_composite_add_n_8888_8888_ca (pixman_implementation_t *imp,
+ pixman_op_t op,
+ pixman_image_t * src_image,
+ pixman_image_t * mask_image,
+ pixman_image_t * dst_image,
+ int32_t src_x,
+ int32_t src_y,
+ int32_t mask_x,
+ int32_t mask_y,
+ int32_t dest_x,
+ int32_t dest_y,
+ int32_t width,
+ int32_t height)
+{
+ uint32_t src, srca;
+ uint32_t *dst_line, d;
+ uint32_t *mask_line, m;
+ uint32_t pack_cmp;
+ int dst_stride, mask_stride;
+
+ __m128i xmm_src, xmm_alpha;
+ __m128i xmm_dst;
+ __m128i xmm_mask, xmm_mask_lo, xmm_mask_hi;
+
+ __m64 mmx_src, mmx_alpha, mmx_mask, mmx_dest;
+
+ src = _pixman_image_get_solid (src_image, dst_image->bits.format);
+ srca = src >> 24;
+
+ if (src == 0)
+ return;
+
+ PIXMAN_IMAGE_GET_LINE (
+ dst_image, dest_x, dest_y, uint32_t, dst_stride, dst_line, 1);
+ PIXMAN_IMAGE_GET_LINE (
+ mask_image, mask_x, mask_y, uint32_t, mask_stride, mask_line, 1);
+
+ xmm_src = _mm_unpacklo_epi8 (
+ create_mask_2x32_128 (src, src), _mm_setzero_si128 ());
+ xmm_alpha = expand_alpha_1x128 (xmm_src);
+ mmx_src = _mm_movepi64_pi64 (xmm_src);
+ mmx_alpha = _mm_movepi64_pi64 (xmm_alpha);
+
+ while (height--)
+ {
+ int w = width;
+ const uint32_t *pm = (uint32_t *)mask_line;
+ uint32_t *pd = (uint32_t *)dst_line;
+
+ dst_line += dst_stride;
+ mask_line += mask_stride;
+
+ /* call prefetch hint to optimize cache load*/
+ cache_prefetch ((__m128i*)pd);
+ cache_prefetch ((__m128i*)pm);
+
+ while (w && (unsigned long)pd & 15)
+ {
+ m = *pm++;
+
+ if (m)
+ {
+ d = *pd;
+
+ mmx_mask = unpack_32_1x64 (m);
+ mmx_dest = unpack_32_1x64 (d);
+
+ *pd = pack_1x64_32 (
+ _mm_adds_pu8 (pix_multiply_1x64 (mmx_mask, mmx_src), mmx_dest));
+ }
+
+ pd++;
+ w--;
+ }
+
+ /* call prefetch hint to optimize cache load*/
+ cache_prefetch ((__m128i*)pd);
+ cache_prefetch ((__m128i*)pm);
+
+ while (w >= 4)
+ {
+ /* fill cache line with next memory */
+ cache_prefetch_next ((__m128i*)pd);
+ cache_prefetch_next ((__m128i*)pm);
+
+ xmm_mask = load_128_unaligned ((__m128i*)pm);
+
+ pack_cmp =
+ _mm_movemask_epi8 (
+ _mm_cmpeq_epi32 (xmm_mask, _mm_setzero_si128 ()));
+
+ /* if all bits in mask are zero, pack_cmp are equal to 0xffff */
+ if (pack_cmp != 0xffff)
+ {
+ xmm_dst = load_128_aligned ((__m128i*)pd);
+
+ unpack_128_2x128 (xmm_mask, &xmm_mask_lo, &xmm_mask_hi);
+
+ pix_multiply_2x128 (&xmm_src, &xmm_src,
+ &xmm_mask_lo, &xmm_mask_hi,
+ &xmm_mask_lo, &xmm_mask_hi);
+ xmm_mask_hi = pack_2x128_128 (xmm_mask_lo, xmm_mask_hi);
+
+ save_128_aligned (
+ (__m128i*)pd, _mm_adds_epu8 (xmm_mask_hi, xmm_dst));
+ }
+
+ pd += 4;
+ pm += 4;
+ w -= 4;
+ }
+
+ while (w)
+ {
+ m = *pm++;
+
+ if (m)
+ {
+ d = *pd;
+
+ mmx_mask = unpack_32_1x64 (m);
+ mmx_dest = unpack_32_1x64 (d);
+
+ *pd = pack_1x64_32 (
+ _mm_adds_pu8 (pix_multiply_1x64 (mmx_mask, mmx_src), mmx_dest));
+ }
+
+ pd++;
+ w--;
+ }
+ }
+
+ _mm_empty ();
+}
+
+/* ---------------------------------------------------------------------------
+ * composite_over_n_8888_8888_ca
+ */
+
+static void
+sse2_composite_over_n_8888_8888_ca (pixman_implementation_t *imp,
+ pixman_op_t op,
+ pixman_image_t * src_image,
+ pixman_image_t * mask_image,
+ pixman_image_t * dst_image,
+ int32_t src_x,
+ int32_t src_y,
+ int32_t mask_x,
+ int32_t mask_y,
+ int32_t dest_x,
+ int32_t dest_y,
+ int32_t width,
+ int32_t height)
+{
+ uint32_t src;
+ uint32_t *dst_line, d;
+ uint32_t *mask_line, m;
+ uint32_t pack_cmp;
+ int dst_stride, mask_stride;
+
+ __m128i xmm_src, xmm_alpha;
+ __m128i xmm_dst, xmm_dst_lo, xmm_dst_hi;
+ __m128i xmm_mask, xmm_mask_lo, xmm_mask_hi;
+
+ __m64 mmx_src, mmx_alpha, mmx_mask, mmx_dest;
+
+ src = _pixman_image_get_solid (src_image, dst_image->bits.format);
+
+ if (src == 0)
+ return;
+
+ PIXMAN_IMAGE_GET_LINE (
+ dst_image, dest_x, dest_y, uint32_t, dst_stride, dst_line, 1);
+ PIXMAN_IMAGE_GET_LINE (
+ mask_image, mask_x, mask_y, uint32_t, mask_stride, mask_line, 1);
+
+ xmm_src = _mm_unpacklo_epi8 (
+ create_mask_2x32_128 (src, src), _mm_setzero_si128 ());
+ xmm_alpha = expand_alpha_1x128 (xmm_src);
+ mmx_src = _mm_movepi64_pi64 (xmm_src);
+ mmx_alpha = _mm_movepi64_pi64 (xmm_alpha);
+
+ while (height--)
+ {
+ int w = width;
+ const uint32_t *pm = (uint32_t *)mask_line;
+ uint32_t *pd = (uint32_t *)dst_line;
+
+ dst_line += dst_stride;
+ mask_line += mask_stride;
+
+ /* call prefetch hint to optimize cache load*/
+ cache_prefetch ((__m128i*)pd);
+ cache_prefetch ((__m128i*)pm);
+
+ while (w && (unsigned long)pd & 15)
+ {
+ m = *pm++;
+
+ if (m)
+ {
+ d = *pd;
+ mmx_mask = unpack_32_1x64 (m);
+ mmx_dest = unpack_32_1x64 (d);
+
+ *pd = pack_1x64_32 (in_over_1x64 (&mmx_src,
+ &mmx_alpha,
+ &mmx_mask,
+ &mmx_dest));
+ }
+
+ pd++;
+ w--;
+ }
+
+ /* call prefetch hint to optimize cache load*/
+ cache_prefetch ((__m128i*)pd);
+ cache_prefetch ((__m128i*)pm);
+
+ while (w >= 4)
+ {
+ /* fill cache line with next memory */
+ cache_prefetch_next ((__m128i*)pd);
+ cache_prefetch_next ((__m128i*)pm);
+
+ xmm_mask = load_128_unaligned ((__m128i*)pm);
+
+ pack_cmp =
+ _mm_movemask_epi8 (
+ _mm_cmpeq_epi32 (xmm_mask, _mm_setzero_si128 ()));
+
+ /* if all bits in mask are zero, pack_cmp are equal to 0xffff */
+ if (pack_cmp != 0xffff)
+ {
+ xmm_dst = load_128_aligned ((__m128i*)pd);
+
+ unpack_128_2x128 (xmm_mask, &xmm_mask_lo, &xmm_mask_hi);
+ unpack_128_2x128 (xmm_dst, &xmm_dst_lo, &xmm_dst_hi);
+
+ in_over_2x128 (&xmm_src, &xmm_src,
+ &xmm_alpha, &xmm_alpha,
+ &xmm_mask_lo, &xmm_mask_hi,
+ &xmm_dst_lo, &xmm_dst_hi);
+
+ save_128_aligned (
+ (__m128i*)pd, pack_2x128_128 (xmm_dst_lo, xmm_dst_hi));
+ }
+
+ pd += 4;
+ pm += 4;
+ w -= 4;
+ }
+
+ while (w)
+ {
+ m = *pm++;
+
+ if (m)
+ {
+ d = *pd;
+ mmx_mask = unpack_32_1x64 (m);
+ mmx_dest = unpack_32_1x64 (d);
+
+ *pd = pack_1x64_32 (
+ in_over_1x64 (&mmx_src, &mmx_alpha, &mmx_mask, &mmx_dest));
+ }
+
+ pd++;
+ w--;
+ }
+ }
+
+ _mm_empty ();
+}
+
+/*---------------------------------------------------------------------
+ * composite_over_8888_n_8888
+ */
+
+static void
+sse2_composite_over_8888_n_8888 (pixman_implementation_t *imp,
+ pixman_op_t op,
+ pixman_image_t * src_image,
+ pixman_image_t * mask_image,
+ pixman_image_t * dst_image,
+ int32_t src_x,
+ int32_t src_y,
+ int32_t mask_x,
+ int32_t mask_y,
+ int32_t dest_x,
+ int32_t dest_y,
+ int32_t width,
+ int32_t height)
+{
+ uint32_t *dst_line, *dst;
+ uint32_t *src_line, *src;
+ uint32_t mask;
+ int32_t w;
+ int dst_stride, src_stride;
+
+ __m128i xmm_mask;
+ __m128i xmm_src, xmm_src_lo, xmm_src_hi;
+ __m128i xmm_dst, xmm_dst_lo, xmm_dst_hi;
+ __m128i xmm_alpha_lo, xmm_alpha_hi;
+
+ PIXMAN_IMAGE_GET_LINE (
+ dst_image, dest_x, dest_y, uint32_t, dst_stride, dst_line, 1);
+ PIXMAN_IMAGE_GET_LINE (
+ src_image, src_x, src_y, uint32_t, src_stride, src_line, 1);
+
+ mask = _pixman_image_get_solid (mask_image, PIXMAN_a8r8g8b8);
+
+ xmm_mask = create_mask_16_128 (mask >> 24);
+
+ while (height--)
+ {
+ dst = dst_line;
+ dst_line += dst_stride;
+ src = src_line;
+ src_line += src_stride;
+ w = width;
+
+ /* call prefetch hint to optimize cache load*/
+ cache_prefetch ((__m128i*)dst);
+ cache_prefetch ((__m128i*)src);
+
+ while (w && (unsigned long)dst & 15)
+ {
+ uint32_t s = *src++;
+ uint32_t d = *dst;
+
+ __m64 ms = unpack_32_1x64 (s);
+ __m64 alpha = expand_alpha_1x64 (ms);
+ __m64 dest = _mm_movepi64_pi64 (xmm_mask);
+ __m64 alpha_dst = unpack_32_1x64 (d);
+
+ *dst++ = pack_1x64_32 (
+ in_over_1x64 (&ms, &alpha, &dest, &alpha_dst));
+
+ w--;
+ }
+
+ /* call prefetch hint to optimize cache load*/
+ cache_prefetch ((__m128i*)dst);
+ cache_prefetch ((__m128i*)src);
+
+ while (w >= 4)
+ {
+ /* fill cache line with next memory */
+ cache_prefetch_next ((__m128i*)dst);
+ cache_prefetch_next ((__m128i*)src);
+
+ xmm_src = load_128_unaligned ((__m128i*)src);
+ xmm_dst = load_128_aligned ((__m128i*)dst);
+
+ unpack_128_2x128 (xmm_src, &xmm_src_lo, &xmm_src_hi);
+ unpack_128_2x128 (xmm_dst, &xmm_dst_lo, &xmm_dst_hi);
+ expand_alpha_2x128 (xmm_src_lo, xmm_src_hi,
+ &xmm_alpha_lo, &xmm_alpha_hi);
+
+ in_over_2x128 (&xmm_src_lo, &xmm_src_hi,
+ &xmm_alpha_lo, &xmm_alpha_hi,
+ &xmm_mask, &xmm_mask,
+ &xmm_dst_lo, &xmm_dst_hi);
+
+ save_128_aligned (
+ (__m128i*)dst, pack_2x128_128 (xmm_dst_lo, xmm_dst_hi));
+
+ dst += 4;
+ src += 4;
+ w -= 4;
+ }
+
+ while (w)
+ {
+ uint32_t s = *src++;
+ uint32_t d = *dst;
+
+ __m64 ms = unpack_32_1x64 (s);
+ __m64 alpha = expand_alpha_1x64 (ms);
+ __m64 mask = _mm_movepi64_pi64 (xmm_mask);
+ __m64 dest = unpack_32_1x64 (d);
+
+ *dst++ = pack_1x64_32 (
+ in_over_1x64 (&ms, &alpha, &mask, &dest));
+
+ w--;
+ }
+ }
+
+ _mm_empty ();
+}
+
+/*---------------------------------------------------------------------
+ * composite_over_8888_n_8888
+ */
+
+static void
+sse2_composite_src_x888_8888 (pixman_implementation_t *imp,
+ pixman_op_t op,
+ pixman_image_t * src_image,
+ pixman_image_t * mask_image,
+ pixman_image_t * dst_image,
+ int32_t src_x,
+ int32_t src_y,
+ int32_t mask_x,
+ int32_t mask_y,
+ int32_t dest_x,
+ int32_t dest_y,
+ int32_t width,
+ int32_t height)
+{
+ uint32_t *dst_line, *dst;
+ uint32_t *src_line, *src;
+ int32_t w;
+ int dst_stride, src_stride;
+
+
+ PIXMAN_IMAGE_GET_LINE (
+ dst_image, dest_x, dest_y, uint32_t, dst_stride, dst_line, 1);
+ PIXMAN_IMAGE_GET_LINE (
+ src_image, src_x, src_y, uint32_t, src_stride, src_line, 1);
+
+ while (height--)
+ {
+ dst = dst_line;
+ dst_line += dst_stride;
+ src = src_line;
+ src_line += src_stride;
+ w = width;
+
+ /* call prefetch hint to optimize cache load*/
+ cache_prefetch ((__m128i*)src);
+
+ while (w && (unsigned long)dst & 15)
+ {
+ *dst++ = *src++ | 0xff000000;
+ w--;
+ }
+
+ /* call prefetch hint to optimize cache load*/
+ cache_prefetch ((__m128i*)src);
+
+ while (w >= 16)
+ {
+ __m128i xmm_src1, xmm_src2, xmm_src3, xmm_src4;
+
+ /* fill cache line with next memory */
+ cache_prefetch_next ((__m128i*)src);
+
+ xmm_src1 = load_128_unaligned ((__m128i*)src + 0);
+ xmm_src2 = load_128_unaligned ((__m128i*)src + 1);
+ xmm_src3 = load_128_unaligned ((__m128i*)src + 2);
+ xmm_src4 = load_128_unaligned ((__m128i*)src + 3);
+
+ save_128_aligned ((__m128i*)dst + 0, _mm_or_si128 (xmm_src1, mask_ff000000));
+ save_128_aligned ((__m128i*)dst + 1, _mm_or_si128 (xmm_src2, mask_ff000000));
+ save_128_aligned ((__m128i*)dst + 2, _mm_or_si128 (xmm_src3, mask_ff000000));
+ save_128_aligned ((__m128i*)dst + 3, _mm_or_si128 (xmm_src4, mask_ff000000));
+
+ dst += 16;
+ src += 16;
+ w -= 16;
+ }
+
+ while (w)
+ {
+ *dst++ = *src++ | 0xff000000;
+ w--;
+ }
+ }
+
+ _mm_empty ();
+}
+
+/* ---------------------------------------------------------------------
+ * composite_over_x888_n_8888
+ */
+static void
+sse2_composite_over_x888_n_8888 (pixman_implementation_t *imp,
+ pixman_op_t op,
+ pixman_image_t * src_image,
+ pixman_image_t * mask_image,
+ pixman_image_t * dst_image,
+ int32_t src_x,
+ int32_t src_y,
+ int32_t mask_x,
+ int32_t mask_y,
+ int32_t dest_x,
+ int32_t dest_y,
+ int32_t width,
+ int32_t height)
+{
+ uint32_t *dst_line, *dst;
+ uint32_t *src_line, *src;
+ uint32_t mask;
+ int dst_stride, src_stride;
+ int32_t w;
+
+ __m128i xmm_mask, xmm_alpha;
+ __m128i xmm_src, xmm_src_lo, xmm_src_hi;
+ __m128i xmm_dst, xmm_dst_lo, xmm_dst_hi;
+
+ PIXMAN_IMAGE_GET_LINE (
+ dst_image, dest_x, dest_y, uint32_t, dst_stride, dst_line, 1);
+ PIXMAN_IMAGE_GET_LINE (
+ src_image, src_x, src_y, uint32_t, src_stride, src_line, 1);
+
+ mask = _pixman_image_get_solid (mask_image, PIXMAN_a8r8g8b8);
+
+ xmm_mask = create_mask_16_128 (mask >> 24);
+ xmm_alpha = mask_00ff;
+
+ while (height--)
+ {
+ dst = dst_line;
+ dst_line += dst_stride;
+ src = src_line;
+ src_line += src_stride;
+ w = width;
+
+ /* call prefetch hint to optimize cache load*/
+ cache_prefetch ((__m128i*)dst);
+ cache_prefetch ((__m128i*)src);
+
+ while (w && (unsigned long)dst & 15)
+ {
+ uint32_t s = (*src++) | 0xff000000;
+ uint32_t d = *dst;
+
+ __m64 src = unpack_32_1x64 (s);
+ __m64 alpha = _mm_movepi64_pi64 (xmm_alpha);
+ __m64 mask = _mm_movepi64_pi64 (xmm_mask);
+ __m64 dest = unpack_32_1x64 (d);
+
+ *dst++ = pack_1x64_32 (
+ in_over_1x64 (&src, &alpha, &mask, &dest));
+
+ w--;
+ }
+
+ /* call prefetch hint to optimize cache load*/
+ cache_prefetch ((__m128i*)dst);
+ cache_prefetch ((__m128i*)src);
+
+ while (w >= 4)
+ {
+ /* fill cache line with next memory */
+ cache_prefetch_next ((__m128i*)dst);
+ cache_prefetch_next ((__m128i*)src);
+
+ xmm_src = _mm_or_si128 (
+ load_128_unaligned ((__m128i*)src), mask_ff000000);
+ xmm_dst = load_128_aligned ((__m128i*)dst);
+
+ unpack_128_2x128 (xmm_src, &xmm_src_lo, &xmm_src_hi);
+ unpack_128_2x128 (xmm_dst, &xmm_dst_lo, &xmm_dst_hi);
+
+ in_over_2x128 (&xmm_src_lo, &xmm_src_hi,
+ &xmm_alpha, &xmm_alpha,
+ &xmm_mask, &xmm_mask,
+ &xmm_dst_lo, &xmm_dst_hi);
+
+ save_128_aligned (
+ (__m128i*)dst, pack_2x128_128 (xmm_dst_lo, xmm_dst_hi));
+
+ dst += 4;
+ src += 4;
+ w -= 4;
+
+ }
+
+ while (w)
+ {
+ uint32_t s = (*src++) | 0xff000000;
+ uint32_t d = *dst;
+
+ __m64 src = unpack_32_1x64 (s);
+ __m64 alpha = _mm_movepi64_pi64 (xmm_alpha);
+ __m64 mask = _mm_movepi64_pi64 (xmm_mask);
+ __m64 dest = unpack_32_1x64 (d);
+
+ *dst++ = pack_1x64_32 (
+ in_over_1x64 (&src, &alpha, &mask, &dest));
+
+ w--;
+ }
+ }
+
+ _mm_empty ();
+}
+
+/* --------------------------------------------------------------------
+ * composite_over_8888_8888
+ */
+static void
+sse2_composite_over_8888_8888 (pixman_implementation_t *imp,
+ pixman_op_t op,
+ pixman_image_t * src_image,
+ pixman_image_t * mask_image,
+ pixman_image_t * dst_image,
+ int32_t src_x,
+ int32_t src_y,
+ int32_t mask_x,
+ int32_t mask_y,
+ int32_t dest_x,
+ int32_t dest_y,
+ int32_t width,
+ int32_t height)
+{
+ int dst_stride, src_stride;
+ uint32_t *dst_line, *dst;
+ uint32_t *src_line, *src;
+
+ PIXMAN_IMAGE_GET_LINE (
+ dst_image, dest_x, dest_y, uint32_t, dst_stride, dst_line, 1);
+ PIXMAN_IMAGE_GET_LINE (
+ src_image, src_x, src_y, uint32_t, src_stride, src_line, 1);
+
+ dst = dst_line;
+ src = src_line;
+
+ while (height--)
+ {
+ core_combine_over_u_sse2 (dst, src, NULL, width);
+
+ dst += dst_stride;
+ src += src_stride;
+ }
+ _mm_empty ();
+}
+
+/* ------------------------------------------------------------------
+ * composite_over_8888_0565
+ */
+static force_inline uint16_t
+composite_over_8888_0565pixel (uint32_t src, uint16_t dst)
+{
+ __m64 ms;
+
+ ms = unpack_32_1x64 (src);
+ return pack_565_32_16 (
+ pack_1x64_32 (
+ over_1x64 (
+ ms, expand_alpha_1x64 (ms), expand565_16_1x64 (dst))));
+}
+
+static void
+sse2_composite_over_8888_0565 (pixman_implementation_t *imp,
+ pixman_op_t op,
+ pixman_image_t * src_image,
+ pixman_image_t * mask_image,
+ pixman_image_t * dst_image,
+ int32_t src_x,
+ int32_t src_y,
+ int32_t mask_x,
+ int32_t mask_y,
+ int32_t dest_x,
+ int32_t dest_y,
+ int32_t width,
+ int32_t height)
+{
+ uint16_t *dst_line, *dst, d;
+ uint32_t *src_line, *src, s;
+ int dst_stride, src_stride;
+ int32_t w;
+
+ __m128i xmm_alpha_lo, xmm_alpha_hi;
+ __m128i xmm_src, xmm_src_lo, xmm_src_hi;
+ __m128i xmm_dst, xmm_dst0, xmm_dst1, xmm_dst2, xmm_dst3;
+
+ PIXMAN_IMAGE_GET_LINE (
+ dst_image, dest_x, dest_y, uint16_t, dst_stride, dst_line, 1);
+ PIXMAN_IMAGE_GET_LINE (
+ src_image, src_x, src_y, uint32_t, src_stride, src_line, 1);
+
+#if 0
+ /* FIXME
+ *
+ * I copy the code from MMX one and keep the fixme.
+ * If it's a problem there, probably is a problem here.
+ */
+ assert (src_image->drawable == mask_image->drawable);
+#endif
+
+ while (height--)
+ {
+ dst = dst_line;
+ src = src_line;
+
+ /* call prefetch hint to optimize cache load*/
+ cache_prefetch ((__m128i*)src);
+ cache_prefetch ((__m128i*)dst);
+
+ dst_line += dst_stride;
+ src_line += src_stride;
+ w = width;
+
+ /* Align dst on a 16-byte boundary */
+ while (w &&
+ ((unsigned long)dst & 15))
+ {
+ s = *src++;
+ d = *dst;
+
+ *dst++ = composite_over_8888_0565pixel (s, d);
+ w--;
+ }
+
+ /* call prefetch hint to optimize cache load*/
+ cache_prefetch ((__m128i*)src);
+ cache_prefetch ((__m128i*)dst);
+
+ /* It's a 8 pixel loop */
+ while (w >= 8)
+ {
+ /* fill cache line with next memory */
+ cache_prefetch_next ((__m128i*)src);
+ cache_prefetch_next ((__m128i*)dst);
+
+ /* I'm loading unaligned because I'm not sure
+ * about the address alignment.
+ */
+ xmm_src = load_128_unaligned ((__m128i*) src);
+ xmm_dst = load_128_aligned ((__m128i*) dst);
+
+ /* Unpacking */
+ unpack_128_2x128 (xmm_src, &xmm_src_lo, &xmm_src_hi);
+ unpack_565_128_4x128 (xmm_dst,
+ &xmm_dst0, &xmm_dst1, &xmm_dst2, &xmm_dst3);
+ expand_alpha_2x128 (xmm_src_lo, xmm_src_hi,
+ &xmm_alpha_lo, &xmm_alpha_hi);
+
+ /* I'm loading next 4 pixels from memory
+ * before to optimze the memory read.
+ */
+ xmm_src = load_128_unaligned ((__m128i*) (src + 4));
+
+ over_2x128 (&xmm_src_lo, &xmm_src_hi,
+ &xmm_alpha_lo, &xmm_alpha_hi,
+ &xmm_dst0, &xmm_dst1);
+
+ /* Unpacking */
+ unpack_128_2x128 (xmm_src, &xmm_src_lo, &xmm_src_hi);
+ expand_alpha_2x128 (xmm_src_lo, xmm_src_hi,
+ &xmm_alpha_lo, &xmm_alpha_hi);
+
+ over_2x128 (&xmm_src_lo, &xmm_src_hi,
+ &xmm_alpha_lo, &xmm_alpha_hi,
+ &xmm_dst2, &xmm_dst3);
+
+ save_128_aligned (
+ (__m128i*)dst, pack_565_4x128_128 (
+ &xmm_dst0, &xmm_dst1, &xmm_dst2, &xmm_dst3));
+
+ w -= 8;
+ dst += 8;
+ src += 8;
+ }
+
+ while (w--)
+ {
+ s = *src++;
+ d = *dst;
+
+ *dst++ = composite_over_8888_0565pixel (s, d);
+ }
+ }
+
+ _mm_empty ();
+}
+
+/* -----------------------------------------------------------------
+ * composite_over_n_8_8888
+ */
+
+static void
+sse2_composite_over_n_8_8888 (pixman_implementation_t *imp,
+ pixman_op_t op,
+ pixman_image_t * src_image,
+ pixman_image_t * mask_image,
+ pixman_image_t * dst_image,
+ int32_t src_x,
+ int32_t src_y,
+ int32_t mask_x,
+ int32_t mask_y,
+ int32_t dest_x,
+ int32_t dest_y,
+ int32_t width,
+ int32_t height)
+{
+ uint32_t src, srca;
+ uint32_t *dst_line, *dst;
+ uint8_t *mask_line, *mask;
+ int dst_stride, mask_stride;
+ int32_t w;
+ uint32_t m, d;
+
+ __m128i xmm_src, xmm_alpha, xmm_def;
+ __m128i xmm_dst, xmm_dst_lo, xmm_dst_hi;
+ __m128i xmm_mask, xmm_mask_lo, xmm_mask_hi;
+
+ __m64 mmx_src, mmx_alpha, mmx_mask, mmx_dest;
+
+ src = _pixman_image_get_solid (src_image, dst_image->bits.format);
+
+ srca = src >> 24;
+ if (src == 0)
+ return;
+
+ PIXMAN_IMAGE_GET_LINE (
+ dst_image, dest_x, dest_y, uint32_t, dst_stride, dst_line, 1);
+ PIXMAN_IMAGE_GET_LINE (
+ mask_image, mask_x, mask_y, uint8_t, mask_stride, mask_line, 1);
+
+ xmm_def = create_mask_2x32_128 (src, src);
+ xmm_src = expand_pixel_32_1x128 (src);
+ xmm_alpha = expand_alpha_1x128 (xmm_src);
+ mmx_src = _mm_movepi64_pi64 (xmm_src);
+ mmx_alpha = _mm_movepi64_pi64 (xmm_alpha);
+
+ while (height--)
+ {
+ dst = dst_line;
+ dst_line += dst_stride;
+ mask = mask_line;
+ mask_line += mask_stride;
+ w = width;
+
+ /* call prefetch hint to optimize cache load*/
+ cache_prefetch ((__m128i*)mask);
+ cache_prefetch ((__m128i*)dst);
+
+ while (w && (unsigned long)dst & 15)
+ {
+ uint8_t m = *mask++;
+
+ if (m)
+ {
+ d = *dst;
+ mmx_mask = expand_pixel_8_1x64 (m);
+ mmx_dest = unpack_32_1x64 (d);
+
+ *dst = pack_1x64_32 (in_over_1x64 (&mmx_src,
+ &mmx_alpha,
+ &mmx_mask,
+ &mmx_dest));
+ }
+
+ w--;
+ dst++;
+ }
+
+ /* call prefetch hint to optimize cache load*/
+ cache_prefetch ((__m128i*)mask);
+ cache_prefetch ((__m128i*)dst);
+
+ while (w >= 4)
+ {
+ /* fill cache line with next memory */
+ cache_prefetch_next ((__m128i*)mask);
+ cache_prefetch_next ((__m128i*)dst);
+
+ m = *((uint32_t*)mask);
+
+ if (srca == 0xff && m == 0xffffffff)
+ {
+ save_128_aligned ((__m128i*)dst, xmm_def);
+ }
+ else if (m)
+ {
+ xmm_dst = load_128_aligned ((__m128i*) dst);
+ xmm_mask = unpack_32_1x128 (m);
+ xmm_mask = _mm_unpacklo_epi8 (xmm_mask, _mm_setzero_si128 ());
+
+ /* Unpacking */
+ unpack_128_2x128 (xmm_dst, &xmm_dst_lo, &xmm_dst_hi);
+ unpack_128_2x128 (xmm_mask, &xmm_mask_lo, &xmm_mask_hi);
+
+ expand_alpha_rev_2x128 (xmm_mask_lo, xmm_mask_hi,
+ &xmm_mask_lo, &xmm_mask_hi);
+
+ in_over_2x128 (&xmm_src, &xmm_src,
+ &xmm_alpha, &xmm_alpha,
+ &xmm_mask_lo, &xmm_mask_hi,
+ &xmm_dst_lo, &xmm_dst_hi);
+
+ save_128_aligned (
+ (__m128i*)dst, pack_2x128_128 (xmm_dst_lo, xmm_dst_hi));
+ }
+
+ w -= 4;
+ dst += 4;
+ mask += 4;
+ }
+
+ while (w)
+ {
+ uint8_t m = *mask++;
+
+ if (m)
+ {
+ d = *dst;
+ mmx_mask = expand_pixel_8_1x64 (m);
+ mmx_dest = unpack_32_1x64 (d);
+
+ *dst = pack_1x64_32 (in_over_1x64 (&mmx_src,
+ &mmx_alpha,
+ &mmx_mask,
+ &mmx_dest));
+ }
+
+ w--;
+ dst++;
+ }
+ }
+
+ _mm_empty ();
+}
+
+/* ----------------------------------------------------------------
+ * composite_over_n_8_8888
+ */
+
+pixman_bool_t
+pixman_fill_sse2 (uint32_t *bits,
+ int stride,
+ int bpp,
+ int x,
+ int y,
+ int width,
+ int height,
+ uint32_t data)
+{
+ uint32_t byte_width;
+ uint8_t *byte_line;
+
+ __m128i xmm_def;
+
+ if (bpp == 8)
+ {
+ uint8_t b;
+ uint16_t w;
+
+ stride = stride * (int) sizeof (uint32_t) / 1;
+ byte_line = (uint8_t *)(((uint8_t *)bits) + stride * y + x);
+ byte_width = width;
+ stride *= 1;
+
+ b = data & 0xff;
+ w = (b << 8) | b;
+ data = (w << 16) | w;
+ }
+ else if (bpp == 16)
+ {
+ stride = stride * (int) sizeof (uint32_t) / 2;
+ byte_line = (uint8_t *)(((uint16_t *)bits) + stride * y + x);
+ byte_width = 2 * width;
+ stride *= 2;
+
+ data = (data & 0xffff) * 0x00010001;
+ }
+ else if (bpp == 32)
+ {
+ stride = stride * (int) sizeof (uint32_t) / 4;
+ byte_line = (uint8_t *)(((uint32_t *)bits) + stride * y + x);
+ byte_width = 4 * width;
+ stride *= 4;
+ }
+ else
+ {
+ return FALSE;
+ }
+
+ cache_prefetch ((__m128i*)byte_line);
+ xmm_def = create_mask_2x32_128 (data, data);
+
+ while (height--)
+ {
+ int w;
+ uint8_t *d = byte_line;
+ byte_line += stride;
+ w = byte_width;
+
+ cache_prefetch_next ((__m128i*)d);
+
+ while (w >= 1 && ((unsigned long)d & 1))
+ {
+ *(uint8_t *)d = data;
+ w -= 1;
+ d += 1;
+ }
+
+ while (w >= 2 && ((unsigned long)d & 3))
+ {
+ *(uint16_t *)d = data;
+ w -= 2;
+ d += 2;
+ }
+
+ while (w >= 4 && ((unsigned long)d & 15))
+ {
+ *(uint32_t *)d = data;
+
+ w -= 4;
+ d += 4;
+ }
+
+ cache_prefetch_next ((__m128i*)d);
+
+ while (w >= 128)
+ {
+ cache_prefetch (((__m128i*)d) + 12);
+
+ save_128_aligned ((__m128i*)(d), xmm_def);
+ save_128_aligned ((__m128i*)(d + 16), xmm_def);
+ save_128_aligned ((__m128i*)(d + 32), xmm_def);
+ save_128_aligned ((__m128i*)(d + 48), xmm_def);
+ save_128_aligned ((__m128i*)(d + 64), xmm_def);
+ save_128_aligned ((__m128i*)(d + 80), xmm_def);
+ save_128_aligned ((__m128i*)(d + 96), xmm_def);
+ save_128_aligned ((__m128i*)(d + 112), xmm_def);
+
+ d += 128;
+ w -= 128;
+ }
+
+ if (w >= 64)
+ {
+ cache_prefetch (((__m128i*)d) + 8);
+
+ save_128_aligned ((__m128i*)(d), xmm_def);
+ save_128_aligned ((__m128i*)(d + 16), xmm_def);
+ save_128_aligned ((__m128i*)(d + 32), xmm_def);
+ save_128_aligned ((__m128i*)(d + 48), xmm_def);
+
+ d += 64;
+ w -= 64;
+ }
+
+ cache_prefetch_next ((__m128i*)d);
+
+ if (w >= 32)
+ {
+ save_128_aligned ((__m128i*)(d), xmm_def);
+ save_128_aligned ((__m128i*)(d + 16), xmm_def);
+
+ d += 32;
+ w -= 32;
+ }
+
+ if (w >= 16)
+ {
+ save_128_aligned ((__m128i*)(d), xmm_def);
+
+ d += 16;
+ w -= 16;
+ }
+
+ cache_prefetch_next ((__m128i*)d);
+
+ while (w >= 4)
+ {
+ *(uint32_t *)d = data;
+
+ w -= 4;
+ d += 4;
+ }
+
+ if (w >= 2)
+ {
+ *(uint16_t *)d = data;
+ w -= 2;
+ d += 2;
+ }
+
+ if (w >= 1)
+ {
+ *(uint8_t *)d = data;
+ w -= 1;
+ d += 1;
+ }
+ }
+
+ _mm_empty ();
+ return TRUE;
+}
+
+static void
+sse2_composite_src_n_8_8888 (pixman_implementation_t *imp,
+ pixman_op_t op,
+ pixman_image_t * src_image,
+ pixman_image_t * mask_image,
+ pixman_image_t * dst_image,
+ int32_t src_x,
+ int32_t src_y,
+ int32_t mask_x,
+ int32_t mask_y,
+ int32_t dest_x,
+ int32_t dest_y,
+ int32_t width,
+ int32_t height)
+{
+ uint32_t src, srca;
+ uint32_t *dst_line, *dst;
+ uint8_t *mask_line, *mask;
+ int dst_stride, mask_stride;
+ int32_t w;
+ uint32_t m;
+
+ __m128i xmm_src, xmm_def;
+ __m128i xmm_mask, xmm_mask_lo, xmm_mask_hi;
+
+ src = _pixman_image_get_solid (src_image, dst_image->bits.format);
+
+ srca = src >> 24;
+ if (src == 0)
+ {
+ pixman_fill_sse2 (dst_image->bits.bits, dst_image->bits.rowstride,
+ PIXMAN_FORMAT_BPP (dst_image->bits.format),
+ dest_x, dest_y, width, height, 0);
+ return;
+ }
+
+ PIXMAN_IMAGE_GET_LINE (
+ dst_image, dest_x, dest_y, uint32_t, dst_stride, dst_line, 1);
+ PIXMAN_IMAGE_GET_LINE (
+ mask_image, mask_x, mask_y, uint8_t, mask_stride, mask_line, 1);
+
+ xmm_def = create_mask_2x32_128 (src, src);
+ xmm_src = expand_pixel_32_1x128 (src);
+
+ while (height--)
+ {
+ dst = dst_line;
+ dst_line += dst_stride;
+ mask = mask_line;
+ mask_line += mask_stride;
+ w = width;
+
+ /* call prefetch hint to optimize cache load*/
+ cache_prefetch ((__m128i*)mask);
+ cache_prefetch ((__m128i*)dst);
+
+ while (w && (unsigned long)dst & 15)
+ {
+ uint8_t m = *mask++;
+
+ if (m)
+ {
+ *dst = pack_1x64_32 (
+ pix_multiply_1x64 (
+ _mm_movepi64_pi64 (xmm_src), expand_pixel_8_1x64 (m)));
+ }
+ else
+ {
+ *dst = 0;
+ }
+
+ w--;
+ dst++;
+ }
+
+ /* call prefetch hint to optimize cache load*/
+ cache_prefetch ((__m128i*)mask);
+ cache_prefetch ((__m128i*)dst);
+
+ while (w >= 4)
+ {
+ /* fill cache line with next memory */
+ cache_prefetch_next ((__m128i*)mask);
+ cache_prefetch_next ((__m128i*)dst);
+
+ m = *((uint32_t*)mask);
+
+ if (srca == 0xff && m == 0xffffffff)
+ {
+ save_128_aligned ((__m128i*)dst, xmm_def);
+ }
+ else if (m)
+ {
+ xmm_mask = unpack_32_1x128 (m);
+ xmm_mask = _mm_unpacklo_epi8 (xmm_mask, _mm_setzero_si128 ());
+
+ /* Unpacking */
+ unpack_128_2x128 (xmm_mask, &xmm_mask_lo, &xmm_mask_hi);
+
+ expand_alpha_rev_2x128 (xmm_mask_lo, xmm_mask_hi,
+ &xmm_mask_lo, &xmm_mask_hi);
+
+ pix_multiply_2x128 (&xmm_src, &xmm_src,
+ &xmm_mask_lo, &xmm_mask_hi,
+ &xmm_mask_lo, &xmm_mask_hi);
+
+ save_128_aligned (
+ (__m128i*)dst, pack_2x128_128 (xmm_mask_lo, xmm_mask_hi));
+ }
+ else
+ {
+ save_128_aligned ((__m128i*)dst, _mm_setzero_si128 ());
+ }
+
+ w -= 4;
+ dst += 4;
+ mask += 4;
+ }
+
+ while (w)
+ {
+ uint8_t m = *mask++;
+
+ if (m)
+ {
+ *dst = pack_1x64_32 (
+ pix_multiply_1x64 (
+ _mm_movepi64_pi64 (xmm_src), expand_pixel_8_1x64 (m)));
+ }
+ else
+ {
+ *dst = 0;
+ }
+
+ w--;
+ dst++;
+ }
+ }
+
+ _mm_empty ();
+}
+
+/*-----------------------------------------------------------------------
+ * composite_over_n_8_0565
+ */
+
+static void
+sse2_composite_over_n_8_0565 (pixman_implementation_t *imp,
+ pixman_op_t op,
+ pixman_image_t * src_image,
+ pixman_image_t * mask_image,
+ pixman_image_t * dst_image,
+ int32_t src_x,
+ int32_t src_y,
+ int32_t mask_x,
+ int32_t mask_y,
+ int32_t dest_x,
+ int32_t dest_y,
+ int32_t width,
+ int32_t height)
+{
+ uint32_t src, srca;
+ uint16_t *dst_line, *dst, d;
+ uint8_t *mask_line, *mask;
+ int dst_stride, mask_stride;
+ int32_t w;
+ uint32_t m;
+ __m64 mmx_src, mmx_alpha, mmx_mask, mmx_dest;
+
+ __m128i xmm_src, xmm_alpha;
+ __m128i xmm_mask, xmm_mask_lo, xmm_mask_hi;
+ __m128i xmm_dst, xmm_dst0, xmm_dst1, xmm_dst2, xmm_dst3;
+
+ src = _pixman_image_get_solid (src_image, dst_image->bits.format);
+
+ srca = src >> 24;
+ if (src == 0)
+ return;
+
+ PIXMAN_IMAGE_GET_LINE (
+ dst_image, dest_x, dest_y, uint16_t, dst_stride, dst_line, 1);
+ PIXMAN_IMAGE_GET_LINE (
+ mask_image, mask_x, mask_y, uint8_t, mask_stride, mask_line, 1);
+
+ xmm_src = expand_pixel_32_1x128 (src);
+ xmm_alpha = expand_alpha_1x128 (xmm_src);
+ mmx_src = _mm_movepi64_pi64 (xmm_src);
+ mmx_alpha = _mm_movepi64_pi64 (xmm_alpha);
+
+ while (height--)
+ {
+ dst = dst_line;
+ dst_line += dst_stride;
+ mask = mask_line;
+ mask_line += mask_stride;
+ w = width;
+
+ /* call prefetch hint to optimize cache load*/
+ cache_prefetch ((__m128i*)mask);
+ cache_prefetch ((__m128i*)dst);
+
+ while (w && (unsigned long)dst & 15)
+ {
+ m = *mask++;
+
+ if (m)
+ {
+ d = *dst;
+ mmx_mask = expand_alpha_rev_1x64 (unpack_32_1x64 (m));
+ mmx_dest = expand565_16_1x64 (d);
+
+ *dst = pack_565_32_16 (
+ pack_1x64_32 (
+ in_over_1x64 (
+ &mmx_src, &mmx_alpha, &mmx_mask, &mmx_dest)));
+ }
+
+ w--;
+ dst++;
+ }
+
+ /* call prefetch hint to optimize cache load*/
+ cache_prefetch ((__m128i*)mask);
+ cache_prefetch ((__m128i*)dst);
+
+ while (w >= 8)
+ {
+ /* fill cache line with next memory */
+ cache_prefetch_next ((__m128i*)mask);
+ cache_prefetch_next ((__m128i*)dst);
+
+ xmm_dst = load_128_aligned ((__m128i*) dst);
+ unpack_565_128_4x128 (xmm_dst,
+ &xmm_dst0, &xmm_dst1, &xmm_dst2, &xmm_dst3);
+
+ m = *((uint32_t*)mask);
+ mask += 4;
+
+ if (m)
+ {
+ xmm_mask = unpack_32_1x128 (m);
+ xmm_mask = _mm_unpacklo_epi8 (xmm_mask, _mm_setzero_si128 ());
+
+ /* Unpacking */
+ unpack_128_2x128 (xmm_mask, &xmm_mask_lo, &xmm_mask_hi);
+
+ expand_alpha_rev_2x128 (xmm_mask_lo, xmm_mask_hi,
+ &xmm_mask_lo, &xmm_mask_hi);
+
+ in_over_2x128 (&xmm_src, &xmm_src,
+ &xmm_alpha, &xmm_alpha,
+ &xmm_mask_lo, &xmm_mask_hi,
+ &xmm_dst0, &xmm_dst1);
+ }
+
+ m = *((uint32_t*)mask);
+ mask += 4;
+
+ if (m)
+ {
+ xmm_mask = unpack_32_1x128 (m);
+ xmm_mask = _mm_unpacklo_epi8 (xmm_mask, _mm_setzero_si128 ());
+
+ /* Unpacking */
+ unpack_128_2x128 (xmm_mask, &xmm_mask_lo, &xmm_mask_hi);
+
+ expand_alpha_rev_2x128 (xmm_mask_lo, xmm_mask_hi,
+ &xmm_mask_lo, &xmm_mask_hi);
+ in_over_2x128 (&xmm_src, &xmm_src,
+ &xmm_alpha, &xmm_alpha,
+ &xmm_mask_lo, &xmm_mask_hi,
+ &xmm_dst2, &xmm_dst3);
+ }
+
+ save_128_aligned (
+ (__m128i*)dst, pack_565_4x128_128 (
+ &xmm_dst0, &xmm_dst1, &xmm_dst2, &xmm_dst3));
+
+ w -= 8;
+ dst += 8;
+ }
+
+ while (w)
+ {
+ m = *mask++;
+
+ if (m)
+ {
+ d = *dst;
+ mmx_mask = expand_alpha_rev_1x64 (unpack_32_1x64 (m));
+ mmx_dest = expand565_16_1x64 (d);
+
+ *dst = pack_565_32_16 (
+ pack_1x64_32 (
+ in_over_1x64 (
+ &mmx_src, &mmx_alpha, &mmx_mask, &mmx_dest)));
+ }
+
+ w--;
+ dst++;
+ }
+ }
+
+ _mm_empty ();
+}
+
+/* -----------------------------------------------------------------------
+ * composite_over_pixbuf_0565
+ */
+
+static void
+sse2_composite_over_pixbuf_0565 (pixman_implementation_t *imp,
+ pixman_op_t op,
+ pixman_image_t * src_image,
+ pixman_image_t * mask_image,
+ pixman_image_t * dst_image,
+ int32_t src_x,
+ int32_t src_y,
+ int32_t mask_x,
+ int32_t mask_y,
+ int32_t dest_x,
+ int32_t dest_y,
+ int32_t width,
+ int32_t height)
+{
+ uint16_t *dst_line, *dst, d;
+ uint32_t *src_line, *src, s;
+ int dst_stride, src_stride;
+ int32_t w;
+ uint32_t opaque, zero;
+
+ __m64 ms;
+ __m128i xmm_src, xmm_src_lo, xmm_src_hi;
+ __m128i xmm_dst, xmm_dst0, xmm_dst1, xmm_dst2, xmm_dst3;
+
+ PIXMAN_IMAGE_GET_LINE (
+ dst_image, dest_x, dest_y, uint16_t, dst_stride, dst_line, 1);
+ PIXMAN_IMAGE_GET_LINE (
+ src_image, src_x, src_y, uint32_t, src_stride, src_line, 1);
+
+#if 0
+ /* FIXME
+ *
+ * I copy the code from MMX one and keep the fixme.
+ * If it's a problem there, probably is a problem here.
+ */
+ assert (src_image->drawable == mask_image->drawable);
+#endif
+
+ while (height--)
+ {
+ dst = dst_line;
+ dst_line += dst_stride;
+ src = src_line;
+ src_line += src_stride;
+ w = width;
+
+ /* call prefetch hint to optimize cache load*/
+ cache_prefetch ((__m128i*)src);
+ cache_prefetch ((__m128i*)dst);
+
+ while (w && (unsigned long)dst & 15)
+ {
+ s = *src++;
+ d = *dst;
+
+ ms = unpack_32_1x64 (s);
+
+ *dst++ = pack_565_32_16 (
+ pack_1x64_32 (
+ over_rev_non_pre_1x64 (ms, expand565_16_1x64 (d))));
+ w--;
+ }
+
+ /* call prefetch hint to optimize cache load*/
+ cache_prefetch ((__m128i*)src);
+ cache_prefetch ((__m128i*)dst);
+
+ while (w >= 8)
+ {
+ /* fill cache line with next memory */
+ cache_prefetch_next ((__m128i*)src);
+ cache_prefetch_next ((__m128i*)dst);
+
+ /* First round */
+ xmm_src = load_128_unaligned ((__m128i*)src);
+ xmm_dst = load_128_aligned ((__m128i*)dst);
+
+ opaque = is_opaque (xmm_src);
+ zero = is_zero (xmm_src);
+
+ unpack_565_128_4x128 (xmm_dst,
+ &xmm_dst0, &xmm_dst1, &xmm_dst2, &xmm_dst3);
+ unpack_128_2x128 (xmm_src, &xmm_src_lo, &xmm_src_hi);
+
+ /* preload next round*/
+ xmm_src = load_128_unaligned ((__m128i*)(src + 4));
+
+ if (opaque)
+ {
+ invert_colors_2x128 (xmm_src_lo, xmm_src_hi,
+ &xmm_dst0, &xmm_dst1);
+ }
+ else if (!zero)
+ {
+ over_rev_non_pre_2x128 (xmm_src_lo, xmm_src_hi,
+ &xmm_dst0, &xmm_dst1);
+ }
+
+ /* Second round */
+ opaque = is_opaque (xmm_src);
+ zero = is_zero (xmm_src);
+
+ unpack_128_2x128 (xmm_src, &xmm_src_lo, &xmm_src_hi);
+
+ if (opaque)
+ {
+ invert_colors_2x128 (xmm_src_lo, xmm_src_hi,
+ &xmm_dst2, &xmm_dst3);
+ }
+ else if (!zero)
+ {
+ over_rev_non_pre_2x128 (xmm_src_lo, xmm_src_hi,
+ &xmm_dst2, &xmm_dst3);
+ }
+
+ save_128_aligned (
+ (__m128i*)dst, pack_565_4x128_128 (
+ &xmm_dst0, &xmm_dst1, &xmm_dst2, &xmm_dst3));
+
+ w -= 8;
+ src += 8;
+ dst += 8;
+ }
+
+ while (w)
+ {
+ s = *src++;
+ d = *dst;
+
+ ms = unpack_32_1x64 (s);
+
+ *dst++ = pack_565_32_16 (
+ pack_1x64_32 (
+ over_rev_non_pre_1x64 (ms, expand565_16_1x64 (d))));
+ w--;
+ }
+ }
+
+ _mm_empty ();
+}
+
+/* -------------------------------------------------------------------------
+ * composite_over_pixbuf_8888
+ */
+
+static void
+sse2_composite_over_pixbuf_8888 (pixman_implementation_t *imp,
+ pixman_op_t op,
+ pixman_image_t * src_image,
+ pixman_image_t * mask_image,
+ pixman_image_t * dst_image,
+ int32_t src_x,
+ int32_t src_y,
+ int32_t mask_x,
+ int32_t mask_y,
+ int32_t dest_x,
+ int32_t dest_y,
+ int32_t width,
+ int32_t height)
+{
+ uint32_t *dst_line, *dst, d;
+ uint32_t *src_line, *src, s;
+ int dst_stride, src_stride;
+ int32_t w;
+ uint32_t opaque, zero;
+
+ __m128i xmm_src_lo, xmm_src_hi;
+ __m128i xmm_dst_lo, xmm_dst_hi;
+
+ PIXMAN_IMAGE_GET_LINE (
+ dst_image, dest_x, dest_y, uint32_t, dst_stride, dst_line, 1);
+ PIXMAN_IMAGE_GET_LINE (
+ src_image, src_x, src_y, uint32_t, src_stride, src_line, 1);
+
+#if 0
+ /* FIXME
+ *
+ * I copy the code from MMX one and keep the fixme.
+ * If it's a problem there, probably is a problem here.
+ */
+ assert (src_image->drawable == mask_image->drawable);
+#endif
+
+ while (height--)
+ {
+ dst = dst_line;
+ dst_line += dst_stride;
+ src = src_line;
+ src_line += src_stride;
+ w = width;
+
+ /* call prefetch hint to optimize cache load*/
+ cache_prefetch ((__m128i*)src);
+ cache_prefetch ((__m128i*)dst);
+
+ while (w && (unsigned long)dst & 15)
+ {
+ s = *src++;
+ d = *dst;
+
+ *dst++ = pack_1x64_32 (
+ over_rev_non_pre_1x64 (
+ unpack_32_1x64 (s), unpack_32_1x64 (d)));
+
+ w--;
+ }
+
+ /* call prefetch hint to optimize cache load*/
+ cache_prefetch ((__m128i*)src);
+ cache_prefetch ((__m128i*)dst);
+
+ while (w >= 4)
+ {
+ /* fill cache line with next memory */
+ cache_prefetch_next ((__m128i*)src);
+ cache_prefetch_next ((__m128i*)dst);
+
+ xmm_src_hi = load_128_unaligned ((__m128i*)src);
+
+ opaque = is_opaque (xmm_src_hi);
+ zero = is_zero (xmm_src_hi);
+
+ unpack_128_2x128 (xmm_src_hi, &xmm_src_lo, &xmm_src_hi);
+
+ if (opaque)
+ {
+ invert_colors_2x128 (xmm_src_lo, xmm_src_hi,
+ &xmm_dst_lo, &xmm_dst_hi);
+
+ save_128_aligned (
+ (__m128i*)dst, pack_2x128_128 (xmm_dst_lo, xmm_dst_hi));
+ }
+ else if (!zero)
+ {
+ xmm_dst_hi = load_128_aligned ((__m128i*)dst);
+
+ unpack_128_2x128 (xmm_dst_hi, &xmm_dst_lo, &xmm_dst_hi);
+
+ over_rev_non_pre_2x128 (xmm_src_lo, xmm_src_hi,
+ &xmm_dst_lo, &xmm_dst_hi);
+
+ save_128_aligned (
+ (__m128i*)dst, pack_2x128_128 (xmm_dst_lo, xmm_dst_hi));
+ }
+
+ w -= 4;
+ dst += 4;
+ src += 4;
+ }
+
+ while (w)
+ {
+ s = *src++;
+ d = *dst;
+
+ *dst++ = pack_1x64_32 (
+ over_rev_non_pre_1x64 (
+ unpack_32_1x64 (s), unpack_32_1x64 (d)));
+
+ w--;
+ }
+ }
+
+ _mm_empty ();
+}
+
+/* -------------------------------------------------------------------------------------------------
+ * composite_over_n_8888_0565_ca
+ */
+
+static void
+sse2_composite_over_n_8888_0565_ca (pixman_implementation_t *imp,
+ pixman_op_t op,
+ pixman_image_t * src_image,
+ pixman_image_t * mask_image,
+ pixman_image_t * dst_image,
+ int32_t src_x,
+ int32_t src_y,
+ int32_t mask_x,
+ int32_t mask_y,
+ int32_t dest_x,
+ int32_t dest_y,
+ int32_t width,
+ int32_t height)
+{
+ uint32_t src;
+ uint16_t *dst_line, *dst, d;
+ uint32_t *mask_line, *mask, m;
+ int dst_stride, mask_stride;
+ int w;
+ uint32_t pack_cmp;
+
+ __m128i xmm_src, xmm_alpha;
+ __m128i xmm_mask, xmm_mask_lo, xmm_mask_hi;
+ __m128i xmm_dst, xmm_dst0, xmm_dst1, xmm_dst2, xmm_dst3;
+
+ __m64 mmx_src, mmx_alpha, mmx_mask, mmx_dest;
+
+ src = _pixman_image_get_solid (src_image, dst_image->bits.format);
+
+ if (src == 0)
+ return;
+
+ PIXMAN_IMAGE_GET_LINE (
+ dst_image, dest_x, dest_y, uint16_t, dst_stride, dst_line, 1);
+ PIXMAN_IMAGE_GET_LINE (
+ mask_image, mask_x, mask_y, uint32_t, mask_stride, mask_line, 1);
+
+ xmm_src = expand_pixel_32_1x128 (src);
+ xmm_alpha = expand_alpha_1x128 (xmm_src);
+ mmx_src = _mm_movepi64_pi64 (xmm_src);
+ mmx_alpha = _mm_movepi64_pi64 (xmm_alpha);
+
+ while (height--)
+ {
+ w = width;
+ mask = mask_line;
+ dst = dst_line;
+ mask_line += mask_stride;
+ dst_line += dst_stride;
+
+ /* call prefetch hint to optimize cache load*/
+ cache_prefetch ((__m128i*)mask);
+ cache_prefetch ((__m128i*)dst);
+
+ while (w && ((unsigned long)dst & 15))
+ {
+ m = *(uint32_t *) mask;
+
+ if (m)
+ {
+ d = *dst;
+ mmx_mask = unpack_32_1x64 (m);
+ mmx_dest = expand565_16_1x64 (d);
+
+ *dst = pack_565_32_16 (
+ pack_1x64_32 (
+ in_over_1x64 (
+ &mmx_src, &mmx_alpha, &mmx_mask, &mmx_dest)));
+ }
+
+ w--;
+ dst++;
+ mask++;
+ }
+
+ /* call prefetch hint to optimize cache load*/
+ cache_prefetch ((__m128i*)mask);
+ cache_prefetch ((__m128i*)dst);
+
+ while (w >= 8)
+ {
+ /* fill cache line with next memory */
+ cache_prefetch_next ((__m128i*)mask);
+ cache_prefetch_next ((__m128i*)dst);
+
+ /* First round */
+ xmm_mask = load_128_unaligned ((__m128i*)mask);
+ xmm_dst = load_128_aligned ((__m128i*)dst);
+
+ pack_cmp = _mm_movemask_epi8 (
+ _mm_cmpeq_epi32 (xmm_mask, _mm_setzero_si128 ()));
+
+ unpack_565_128_4x128 (xmm_dst,
+ &xmm_dst0, &xmm_dst1, &xmm_dst2, &xmm_dst3);
+ unpack_128_2x128 (xmm_mask, &xmm_mask_lo, &xmm_mask_hi);
+
+ /* preload next round */
+ xmm_mask = load_128_unaligned ((__m128i*)(mask + 4));
+
+ /* preload next round */
+ if (pack_cmp != 0xffff)
+ {
+ in_over_2x128 (&xmm_src, &xmm_src,
+ &xmm_alpha, &xmm_alpha,
+ &xmm_mask_lo, &xmm_mask_hi,
+ &xmm_dst0, &xmm_dst1);
+ }
+
+ /* Second round */
+ pack_cmp = _mm_movemask_epi8 (
+ _mm_cmpeq_epi32 (xmm_mask, _mm_setzero_si128 ()));
+
+ unpack_128_2x128 (xmm_mask, &xmm_mask_lo, &xmm_mask_hi);
+
+ if (pack_cmp != 0xffff)
+ {
+ in_over_2x128 (&xmm_src, &xmm_src,
+ &xmm_alpha, &xmm_alpha,
+ &xmm_mask_lo, &xmm_mask_hi,
+ &xmm_dst2, &xmm_dst3);
+ }
+
+ save_128_aligned (
+ (__m128i*)dst, pack_565_4x128_128 (
+ &xmm_dst0, &xmm_dst1, &xmm_dst2, &xmm_dst3));
+
+ w -= 8;
+ dst += 8;
+ mask += 8;
+ }
+
+ while (w)
+ {
+ m = *(uint32_t *) mask;
+
+ if (m)
+ {
+ d = *dst;
+ mmx_mask = unpack_32_1x64 (m);
+ mmx_dest = expand565_16_1x64 (d);
+
+ *dst = pack_565_32_16 (
+ pack_1x64_32 (
+ in_over_1x64 (
+ &mmx_src, &mmx_alpha, &mmx_mask, &mmx_dest)));
+ }
+
+ w--;
+ dst++;
+ mask++;
+ }
+ }
+
+ _mm_empty ();
+}
+
+/* -----------------------------------------------------------------------
+ * composite_in_n_8_8
+ */
+
+static void
+sse2_composite_in_n_8_8 (pixman_implementation_t *imp,
+ pixman_op_t op,
+ pixman_image_t * src_image,
+ pixman_image_t * mask_image,
+ pixman_image_t * dst_image,
+ int32_t src_x,
+ int32_t src_y,
+ int32_t mask_x,
+ int32_t mask_y,
+ int32_t dest_x,
+ int32_t dest_y,
+ int32_t width,
+ int32_t height)
+{
+ uint8_t *dst_line, *dst;
+ uint8_t *mask_line, *mask;
+ int dst_stride, mask_stride;
+ uint32_t d, m;
+ uint32_t src;
+ uint8_t sa;
+ int32_t w;
+
+ __m128i xmm_alpha;
+ __m128i xmm_mask, xmm_mask_lo, xmm_mask_hi;
+ __m128i xmm_dst, xmm_dst_lo, xmm_dst_hi;
+
+ PIXMAN_IMAGE_GET_LINE (
+ dst_image, dest_x, dest_y, uint8_t, dst_stride, dst_line, 1);
+ PIXMAN_IMAGE_GET_LINE (
+ mask_image, mask_x, mask_y, uint8_t, mask_stride, mask_line, 1);
+
+ src = _pixman_image_get_solid (src_image, dst_image->bits.format);
+
+ sa = src >> 24;
+
+ xmm_alpha = expand_alpha_1x128 (expand_pixel_32_1x128 (src));
+
+ while (height--)
+ {
+ dst = dst_line;
+ dst_line += dst_stride;
+ mask = mask_line;
+ mask_line += mask_stride;
+ w = width;
+
+ /* call prefetch hint to optimize cache load*/
+ cache_prefetch ((__m128i*)mask);
+ cache_prefetch ((__m128i*)dst);
+
+ while (w && ((unsigned long)dst & 15))
+ {
+ m = (uint32_t) *mask++;
+ d = (uint32_t) *dst;
+
+ *dst++ = (uint8_t) pack_1x64_32 (
+ pix_multiply_1x64 (
+ pix_multiply_1x64 (_mm_movepi64_pi64 (xmm_alpha),
+ unpack_32_1x64 (m)),
+ unpack_32_1x64 (d)));
+ w--;
+ }
+
+ /* call prefetch hint to optimize cache load*/
+ cache_prefetch ((__m128i*)mask);
+ cache_prefetch ((__m128i*)dst);
+
+ while (w >= 16)
+ {
+ /* fill cache line with next memory */
+ cache_prefetch_next ((__m128i*)mask);
+ cache_prefetch_next ((__m128i*)dst);
+
+ xmm_mask = load_128_unaligned ((__m128i*)mask);
+ xmm_dst = load_128_aligned ((__m128i*)dst);
+
+ unpack_128_2x128 (xmm_mask, &xmm_mask_lo, &xmm_mask_hi);
+ unpack_128_2x128 (xmm_dst, &xmm_dst_lo, &xmm_dst_hi);
+
+ pix_multiply_2x128 (&xmm_alpha, &xmm_alpha,
+ &xmm_mask_lo, &xmm_mask_hi,
+ &xmm_mask_lo, &xmm_mask_hi);
+
+ pix_multiply_2x128 (&xmm_mask_lo, &xmm_mask_hi,
+ &xmm_dst_lo, &xmm_dst_hi,
+ &xmm_dst_lo, &xmm_dst_hi);
+
+ save_128_aligned (
+ (__m128i*)dst, pack_2x128_128 (xmm_dst_lo, xmm_dst_hi));
+
+ mask += 16;
+ dst += 16;
+ w -= 16;
+ }
+
+ while (w)
+ {
+ m = (uint32_t) *mask++;
+ d = (uint32_t) *dst;
+
+ *dst++ = (uint8_t) pack_1x64_32 (
+ pix_multiply_1x64 (
+ pix_multiply_1x64 (
+ _mm_movepi64_pi64 (xmm_alpha), unpack_32_1x64 (m)),
+ unpack_32_1x64 (d)));
+ w--;
+ }
+ }
+
+ _mm_empty ();
+}
+
+/* -----------------------------------------------------------------------
+ * composite_in_n_8
+ */
+
+static void
+sse2_composite_in_n_8 (pixman_implementation_t *imp,
+ pixman_op_t op,
+ pixman_image_t * src_image,
+ pixman_image_t * mask_image,
+ pixman_image_t * dst_image,
+ int32_t src_x,
+ int32_t src_y,
+ int32_t mask_x,
+ int32_t mask_y,
+ int32_t dest_x,
+ int32_t dest_y,
+ int32_t width,
+ int32_t height)
+{
+ uint8_t *dst_line, *dst;
+ int dst_stride;
+ uint32_t d;
+ uint32_t src;
+ int32_t w;
+
+ __m128i xmm_alpha;
+ __m128i xmm_dst, xmm_dst_lo, xmm_dst_hi;
+
+ PIXMAN_IMAGE_GET_LINE (
+ dst_image, dest_x, dest_y, uint8_t, dst_stride, dst_line, 1);
+
+ src = _pixman_image_get_solid (src_image, dst_image->bits.format);
+
+ xmm_alpha = expand_alpha_1x128 (expand_pixel_32_1x128 (src));
+
+ src = src >> 24;
+
+ if (src == 0xff)
+ return;
+
+ if (src == 0x00)
+ {
+ pixman_fill (dst_image->bits.bits, dst_image->bits.rowstride,
+ 8, dest_x, dest_y, width, height, src);
+
+ return;
+ }
+
+ while (height--)
+ {
+ dst = dst_line;
+ dst_line += dst_stride;
+ w = width;
+
+ /* call prefetch hint to optimize cache load*/
+ cache_prefetch ((__m128i*)dst);
+
+ while (w && ((unsigned long)dst & 15))
+ {
+ d = (uint32_t) *dst;
+
+ *dst++ = (uint8_t) pack_1x64_32 (
+ pix_multiply_1x64 (
+ _mm_movepi64_pi64 (xmm_alpha),
+ unpack_32_1x64 (d)));
+ w--;
+ }
+
+ /* call prefetch hint to optimize cache load*/
+ cache_prefetch ((__m128i*)dst);
+
+ while (w >= 16)
+ {
+ /* fill cache line with next memory */
+ cache_prefetch_next ((__m128i*)dst);
+
+ xmm_dst = load_128_aligned ((__m128i*)dst);
+
+ unpack_128_2x128 (xmm_dst, &xmm_dst_lo, &xmm_dst_hi);
+
+ pix_multiply_2x128 (&xmm_alpha, &xmm_alpha,
+ &xmm_dst_lo, &xmm_dst_hi,
+ &xmm_dst_lo, &xmm_dst_hi);
+
+ save_128_aligned (
+ (__m128i*)dst, pack_2x128_128 (xmm_dst_lo, xmm_dst_hi));
+
+ dst += 16;
+ w -= 16;
+ }
+
+ while (w)
+ {
+ d = (uint32_t) *dst;
+
+ *dst++ = (uint8_t) pack_1x64_32 (
+ pix_multiply_1x64 (
+ _mm_movepi64_pi64 (xmm_alpha),
+ unpack_32_1x64 (d)));
+ w--;
+ }
+ }
+
+ _mm_empty ();
+}
+
+/* ---------------------------------------------------------------------------
+ * composite_in_8_8
+ */
+
+static void
+sse2_composite_in_8_8 (pixman_implementation_t *imp,
+ pixman_op_t op,
+ pixman_image_t * src_image,
+ pixman_image_t * mask_image,
+ pixman_image_t * dst_image,
+ int32_t src_x,
+ int32_t src_y,
+ int32_t mask_x,
+ int32_t mask_y,
+ int32_t dest_x,
+ int32_t dest_y,
+ int32_t width,
+ int32_t height)
+{
+ uint8_t *dst_line, *dst;
+ uint8_t *src_line, *src;
+ int src_stride, dst_stride;
+ int32_t w;
+ uint32_t s, d;
+
+ __m128i xmm_src, xmm_src_lo, xmm_src_hi;
+ __m128i xmm_dst, xmm_dst_lo, xmm_dst_hi;
+
+ PIXMAN_IMAGE_GET_LINE (
+ dst_image, dest_x, dest_y, uint8_t, dst_stride, dst_line, 1);
+ PIXMAN_IMAGE_GET_LINE (
+ src_image, src_x, src_y, uint8_t, src_stride, src_line, 1);
+
+ while (height--)
+ {
+ dst = dst_line;
+ dst_line += dst_stride;
+ src = src_line;
+ src_line += src_stride;
+ w = width;
+
+ /* call prefetch hint to optimize cache load*/
+ cache_prefetch ((__m128i*)src);
+ cache_prefetch ((__m128i*)dst);
+
+ while (w && ((unsigned long)dst & 15))
+ {
+ s = (uint32_t) *src++;
+ d = (uint32_t) *dst;
+
+ *dst++ = (uint8_t) pack_1x64_32 (
+ pix_multiply_1x64 (
+ unpack_32_1x64 (s), unpack_32_1x64 (d)));
+ w--;
+ }
+
+ /* call prefetch hint to optimize cache load*/
+ cache_prefetch ((__m128i*)src);
+ cache_prefetch ((__m128i*)dst);
+
+ while (w >= 16)
+ {
+ /* fill cache line with next memory */
+ cache_prefetch_next ((__m128i*)src);
+ cache_prefetch_next ((__m128i*)dst);
+
+ xmm_src = load_128_unaligned ((__m128i*)src);
+ xmm_dst = load_128_aligned ((__m128i*)dst);
+
+ unpack_128_2x128 (xmm_src, &xmm_src_lo, &xmm_src_hi);
+ unpack_128_2x128 (xmm_dst, &xmm_dst_lo, &xmm_dst_hi);
+
+ pix_multiply_2x128 (&xmm_src_lo, &xmm_src_hi,
+ &xmm_dst_lo, &xmm_dst_hi,
+ &xmm_dst_lo, &xmm_dst_hi);
+
+ save_128_aligned (
+ (__m128i*)dst, pack_2x128_128 (xmm_dst_lo, xmm_dst_hi));
+
+ src += 16;
+ dst += 16;
+ w -= 16;
+ }
+
+ while (w)
+ {
+ s = (uint32_t) *src++;
+ d = (uint32_t) *dst;
+
+ *dst++ = (uint8_t) pack_1x64_32 (
+ pix_multiply_1x64 (unpack_32_1x64 (s), unpack_32_1x64 (d)));
+ w--;
+ }
+ }
+
+ _mm_empty ();
+}
+
+/* -------------------------------------------------------------------------
+ * composite_add_n_8_8
+ */
+
+static void
+sse2_composite_add_n_8_8 (pixman_implementation_t *imp,
+ pixman_op_t op,
+ pixman_image_t * src_image,
+ pixman_image_t * mask_image,
+ pixman_image_t * dst_image,
+ int32_t src_x,
+ int32_t src_y,
+ int32_t mask_x,
+ int32_t mask_y,
+ int32_t dest_x,
+ int32_t dest_y,
+ int32_t width,
+ int32_t height)
+{
+ uint8_t *dst_line, *dst;
+ uint8_t *mask_line, *mask;
+ int dst_stride, mask_stride;
+ int32_t w;
+ uint32_t src;
+ uint8_t sa;
+ uint32_t m, d;
+
+ __m128i xmm_alpha;
+ __m128i xmm_mask, xmm_mask_lo, xmm_mask_hi;
+ __m128i xmm_dst, xmm_dst_lo, xmm_dst_hi;
+
+ PIXMAN_IMAGE_GET_LINE (
+ dst_image, dest_x, dest_y, uint8_t, dst_stride, dst_line, 1);
+ PIXMAN_IMAGE_GET_LINE (
+ mask_image, mask_x, mask_y, uint8_t, mask_stride, mask_line, 1);
+
+ src = _pixman_image_get_solid (src_image, dst_image->bits.format);
+
+ sa = src >> 24;
+
+ xmm_alpha = expand_alpha_1x128 (expand_pixel_32_1x128 (src));
+
+ while (height--)
+ {
+ dst = dst_line;
+ dst_line += dst_stride;
+ mask = mask_line;
+ mask_line += mask_stride;
+ w = width;
+
+ /* call prefetch hint to optimize cache load*/
+ cache_prefetch ((__m128i*)mask);
+ cache_prefetch ((__m128i*)dst);
+
+ while (w && ((unsigned long)dst & 15))
+ {
+ m = (uint32_t) *mask++;
+ d = (uint32_t) *dst;
+
+ *dst++ = (uint8_t) pack_1x64_32 (
+ _mm_adds_pu16 (
+ pix_multiply_1x64 (
+ _mm_movepi64_pi64 (xmm_alpha), unpack_32_1x64 (m)),
+ unpack_32_1x64 (d)));
+ w--;
+ }
+
+ /* call prefetch hint to optimize cache load*/
+ cache_prefetch ((__m128i*)mask);
+ cache_prefetch ((__m128i*)dst);
+
+ while (w >= 16)
+ {
+ /* fill cache line with next memory */
+ cache_prefetch_next ((__m128i*)mask);
+ cache_prefetch_next ((__m128i*)dst);
+
+ xmm_mask = load_128_unaligned ((__m128i*)mask);
+ xmm_dst = load_128_aligned ((__m128i*)dst);
+
+ unpack_128_2x128 (xmm_mask, &xmm_mask_lo, &xmm_mask_hi);
+ unpack_128_2x128 (xmm_dst, &xmm_dst_lo, &xmm_dst_hi);
+
+ pix_multiply_2x128 (&xmm_alpha, &xmm_alpha,
+ &xmm_mask_lo, &xmm_mask_hi,
+ &xmm_mask_lo, &xmm_mask_hi);
+
+ xmm_dst_lo = _mm_adds_epu16 (xmm_mask_lo, xmm_dst_lo);
+ xmm_dst_hi = _mm_adds_epu16 (xmm_mask_hi, xmm_dst_hi);
+
+ save_128_aligned (
+ (__m128i*)dst, pack_2x128_128 (xmm_dst_lo, xmm_dst_hi));
+
+ mask += 16;
+ dst += 16;
+ w -= 16;
+ }
+
+ while (w)
+ {
+ m = (uint32_t) *mask++;
+ d = (uint32_t) *dst;
+
+ *dst++ = (uint8_t) pack_1x64_32 (
+ _mm_adds_pu16 (
+ pix_multiply_1x64 (
+ _mm_movepi64_pi64 (xmm_alpha), unpack_32_1x64 (m)),
+ unpack_32_1x64 (d)));
+
+ w--;
+ }
+ }
+
+ _mm_empty ();
+}
+
+/* -------------------------------------------------------------------------
+ * composite_add_n_8_8
+ */
+
+static void
+sse2_composite_add_n_8 (pixman_implementation_t *imp,
+ pixman_op_t op,
+ pixman_image_t * src_image,
+ pixman_image_t * mask_image,
+ pixman_image_t * dst_image,
+ int32_t src_x,
+ int32_t src_y,
+ int32_t mask_x,
+ int32_t mask_y,
+ int32_t dest_x,
+ int32_t dest_y,
+ int32_t width,
+ int32_t height)
+{
+ uint8_t *dst_line, *dst;
+ int dst_stride;
+ int32_t w;
+ uint32_t src;
+
+ __m128i xmm_src;
+
+ PIXMAN_IMAGE_GET_LINE (
+ dst_image, dest_x, dest_y, uint8_t, dst_stride, dst_line, 1);
+
+ src = _pixman_image_get_solid (src_image, dst_image->bits.format);
+
+ src >>= 24;
+
+ if (src == 0x00)
+ return;
+
+ if (src == 0xff)
+ {
+ pixman_fill (dst_image->bits.bits, dst_image->bits.rowstride,
+ 8, dest_x, dest_y, width, height, 0xff);
+
+ return;
+ }
+
+ src = (src << 24) | (src << 16) | (src << 8) | src;
+ xmm_src = _mm_set_epi32 (src, src, src, src);
+
+ while (height--)
+ {
+ dst = dst_line;
+ dst_line += dst_stride;
+ w = width;
+
+ /* call prefetch hint to optimize cache load*/
+ cache_prefetch ((__m128i*)dst);
+
+ while (w && ((unsigned long)dst & 15))
+ {
+ *dst = (uint8_t)_mm_cvtsi64_si32 (
+ _mm_adds_pu8 (
+ _mm_movepi64_pi64 (xmm_src),
+ _mm_cvtsi32_si64 (*dst)));
+
+ w--;
+ dst++;
+ }
+
+ /* call prefetch hint to optimize cache load*/
+ cache_prefetch ((__m128i*)dst);
+
+ while (w >= 16)
+ {
+ /* fill cache line with next memory */
+ cache_prefetch_next ((__m128i*)dst);
+
+ save_128_aligned (
+ (__m128i*)dst, _mm_adds_epu8 (xmm_src, load_128_aligned ((__m128i*)dst)));
+
+ dst += 16;
+ w -= 16;
+ }
+
+ while (w)
+ {
+ *dst = (uint8_t)_mm_cvtsi64_si32 (
+ _mm_adds_pu8 (
+ _mm_movepi64_pi64 (xmm_src),
+ _mm_cvtsi32_si64 (*dst)));
+
+ w--;
+ dst++;
+ }
+ }
+
+ _mm_empty ();
+}
+
+/* ----------------------------------------------------------------------
+ * composite_add_8000_8000
+ */
+
+static void
+sse2_composite_add_8000_8000 (pixman_implementation_t *imp,
+ pixman_op_t op,
+ pixman_image_t * src_image,
+ pixman_image_t * mask_image,
+ pixman_image_t * dst_image,
+ int32_t src_x,
+ int32_t src_y,
+ int32_t mask_x,
+ int32_t mask_y,
+ int32_t dest_x,
+ int32_t dest_y,
+ int32_t width,
+ int32_t height)
+{
+ uint8_t *dst_line, *dst;
+ uint8_t *src_line, *src;
+ int dst_stride, src_stride;
+ int32_t w;
+ uint16_t t;
+
+ PIXMAN_IMAGE_GET_LINE (
+ src_image, src_x, src_y, uint8_t, src_stride, src_line, 1);
+ PIXMAN_IMAGE_GET_LINE (
+ dst_image, dest_x, dest_y, uint8_t, dst_stride, dst_line, 1);
+
+ while (height--)
+ {
+ dst = dst_line;
+ src = src_line;
+
+ /* call prefetch hint to optimize cache load*/
+ cache_prefetch ((__m128i*)src);
+ cache_prefetch ((__m128i*)dst);
+
+ dst_line += dst_stride;
+ src_line += src_stride;
+ w = width;
+
+ /* Small head */
+ while (w && (unsigned long)dst & 3)
+ {
+ t = (*dst) + (*src++);
+ *dst++ = t | (0 - (t >> 8));
+ w--;
+ }
+
+ core_combine_add_u_sse2 ((uint32_t*)dst, (uint32_t*)src, NULL, w >> 2);
+
+ /* Small tail */
+ dst += w & 0xfffc;
+ src += w & 0xfffc;
+
+ w &= 3;
+
+ while (w)
+ {
+ t = (*dst) + (*src++);
+ *dst++ = t | (0 - (t >> 8));
+ w--;
+ }
+ }
+
+ _mm_empty ();
+}
+
+/* ---------------------------------------------------------------------
+ * composite_add_8888_8888
+ */
+static void
+sse2_composite_add_8888_8888 (pixman_implementation_t *imp,
+ pixman_op_t op,
+ pixman_image_t * src_image,
+ pixman_image_t * mask_image,
+ pixman_image_t * dst_image,
+ int32_t src_x,
+ int32_t src_y,
+ int32_t mask_x,
+ int32_t mask_y,
+ int32_t dest_x,
+ int32_t dest_y,
+ int32_t width,
+ int32_t height)
+{
+ uint32_t *dst_line, *dst;
+ uint32_t *src_line, *src;
+ int dst_stride, src_stride;
+
+ PIXMAN_IMAGE_GET_LINE (
+ src_image, src_x, src_y, uint32_t, src_stride, src_line, 1);
+ PIXMAN_IMAGE_GET_LINE (
+ dst_image, dest_x, dest_y, uint32_t, dst_stride, dst_line, 1);
+
+ while (height--)
+ {
+ dst = dst_line;
+ dst_line += dst_stride;
+ src = src_line;
+ src_line += src_stride;
+
+ core_combine_add_u_sse2 (dst, src, NULL, width);
+ }
+
+ _mm_empty ();
+}
+
+/* -------------------------------------------------------------------------------------------------
+ * sse2_composite_copy_area
+ */
+
+static pixman_bool_t
+pixman_blt_sse2 (uint32_t *src_bits,
+ uint32_t *dst_bits,
+ int src_stride,
+ int dst_stride,
+ int src_bpp,
+ int dst_bpp,
+ int src_x,
+ int src_y,
+ int dst_x,
+ int dst_y,
+ int width,
+ int height)
+{
+ uint8_t * src_bytes;
+ uint8_t * dst_bytes;
+ int byte_width;
+
+ if (src_bpp != dst_bpp)
+ return FALSE;
+
+ if (src_bpp == 16)
+ {
+ src_stride = src_stride * (int) sizeof (uint32_t) / 2;
+ dst_stride = dst_stride * (int) sizeof (uint32_t) / 2;
+ src_bytes =(uint8_t *)(((uint16_t *)src_bits) + src_stride * (src_y) + (src_x));
+ dst_bytes = (uint8_t *)(((uint16_t *)dst_bits) + dst_stride * (dst_y) + (dst_x));
+ byte_width = 2 * width;
+ src_stride *= 2;
+ dst_stride *= 2;
+ }
+ else if (src_bpp == 32)
+ {
+ src_stride = src_stride * (int) sizeof (uint32_t) / 4;
+ dst_stride = dst_stride * (int) sizeof (uint32_t) / 4;
+ src_bytes = (uint8_t *)(((uint32_t *)src_bits) + src_stride * (src_y) + (src_x));
+ dst_bytes = (uint8_t *)(((uint32_t *)dst_bits) + dst_stride * (dst_y) + (dst_x));
+ byte_width = 4 * width;
+ src_stride *= 4;
+ dst_stride *= 4;
+ }
+ else
+ {
+ return FALSE;
+ }
+
+ cache_prefetch ((__m128i*)src_bytes);
+ cache_prefetch ((__m128i*)dst_bytes);
+
+ while (height--)
+ {
+ int w;
+ uint8_t *s = src_bytes;
+ uint8_t *d = dst_bytes;
+ src_bytes += src_stride;
+ dst_bytes += dst_stride;
+ w = byte_width;
+
+ cache_prefetch_next ((__m128i*)s);
+ cache_prefetch_next ((__m128i*)d);
+
+ while (w >= 2 && ((unsigned long)d & 3))
+ {
+ *(uint16_t *)d = *(uint16_t *)s;
+ w -= 2;
+ s += 2;
+ d += 2;
+ }
+
+ while (w >= 4 && ((unsigned long)d & 15))
+ {
+ *(uint32_t *)d = *(uint32_t *)s;
+
+ w -= 4;
+ s += 4;
+ d += 4;
+ }
+
+ cache_prefetch_next ((__m128i*)s);
+ cache_prefetch_next ((__m128i*)d);
+
+ while (w >= 64)
+ {
+ __m128i xmm0, xmm1, xmm2, xmm3;
+
+ /* 128 bytes ahead */
+ cache_prefetch (((__m128i*)s) + 8);
+ cache_prefetch (((__m128i*)d) + 8);
+
+ xmm0 = load_128_unaligned ((__m128i*)(s));
+ xmm1 = load_128_unaligned ((__m128i*)(s + 16));
+ xmm2 = load_128_unaligned ((__m128i*)(s + 32));
+ xmm3 = load_128_unaligned ((__m128i*)(s + 48));
+
+ save_128_aligned ((__m128i*)(d), xmm0);
+ save_128_aligned ((__m128i*)(d + 16), xmm1);
+ save_128_aligned ((__m128i*)(d + 32), xmm2);
+ save_128_aligned ((__m128i*)(d + 48), xmm3);
+
+ s += 64;
+ d += 64;
+ w -= 64;
+ }
+
+ cache_prefetch_next ((__m128i*)s);
+ cache_prefetch_next ((__m128i*)d);
+
+ while (w >= 16)
+ {
+ save_128_aligned ((__m128i*)d, load_128_unaligned ((__m128i*)s) );
+
+ w -= 16;
+ d += 16;
+ s += 16;
+ }
+
+ cache_prefetch_next ((__m128i*)s);
+ cache_prefetch_next ((__m128i*)d);
+
+ while (w >= 4)
+ {
+ *(uint32_t *)d = *(uint32_t *)s;
+
+ w -= 4;
+ s += 4;
+ d += 4;
+ }
+
+ if (w >= 2)
+ {
+ *(uint16_t *)d = *(uint16_t *)s;
+ w -= 2;
+ s += 2;
+ d += 2;
+ }
+ }
+
+ _mm_empty ();
+
+ return TRUE;
+}
+
+static void
+sse2_composite_copy_area (pixman_implementation_t *imp,
+ pixman_op_t op,
+ pixman_image_t * src_image,
+ pixman_image_t * mask_image,
+ pixman_image_t * dst_image,
+ int32_t src_x,
+ int32_t src_y,
+ int32_t mask_x,
+ int32_t mask_y,
+ int32_t dest_x,
+ int32_t dest_y,
+ int32_t width,
+ int32_t height)
+{
+ pixman_blt_sse2 (src_image->bits.bits,
+ dst_image->bits.bits,
+ src_image->bits.rowstride,
+ dst_image->bits.rowstride,
+ PIXMAN_FORMAT_BPP (src_image->bits.format),
+ PIXMAN_FORMAT_BPP (dst_image->bits.format),
+ src_x, src_y, dest_x, dest_y, width, height);
+}
+
+static void
+sse2_composite_over_x888_8_8888 (pixman_implementation_t *imp,
+ pixman_op_t op,
+ pixman_image_t * src_image,
+ pixman_image_t * mask_image,
+ pixman_image_t * dst_image,
+ int32_t src_x,
+ int32_t src_y,
+ int32_t mask_x,
+ int32_t mask_y,
+ int32_t dest_x,
+ int32_t dest_y,
+ int32_t width,
+ int32_t height)
+{
+ uint32_t *src, *src_line, s;
+ uint32_t *dst, *dst_line, d;
+ uint8_t *mask, *mask_line;
+ uint32_t m;
+ int src_stride, mask_stride, dst_stride;
+ int32_t w;
+ __m64 ms;
+
+ __m128i xmm_src, xmm_src_lo, xmm_src_hi;
+ __m128i xmm_dst, xmm_dst_lo, xmm_dst_hi;
+ __m128i xmm_mask, xmm_mask_lo, xmm_mask_hi;
+
+ PIXMAN_IMAGE_GET_LINE (
+ dst_image, dest_x, dest_y, uint32_t, dst_stride, dst_line, 1);
+ PIXMAN_IMAGE_GET_LINE (
+ mask_image, mask_x, mask_y, uint8_t, mask_stride, mask_line, 1);
+ PIXMAN_IMAGE_GET_LINE (
+ src_image, src_x, src_y, uint32_t, src_stride, src_line, 1);
+
+ while (height--)
+ {
+ src = src_line;
+ src_line += src_stride;
+ dst = dst_line;
+ dst_line += dst_stride;
+ mask = mask_line;
+ mask_line += mask_stride;
+
+ w = width;
+
+ /* call prefetch hint to optimize cache load*/
+ cache_prefetch ((__m128i*)src);
+ cache_prefetch ((__m128i*)dst);
+ cache_prefetch ((__m128i*)mask);
+
+ while (w && (unsigned long)dst & 15)
+ {
+ s = 0xff000000 | *src++;
+ m = (uint32_t) *mask++;
+ d = *dst;
+ ms = unpack_32_1x64 (s);
+
+ if (m != 0xff)
+ {
+ __m64 ma = expand_alpha_rev_1x64 (unpack_32_1x64 (m));
+ __m64 md = unpack_32_1x64 (d);
+
+ ms = in_over_1x64 (&ms, &mask_x00ff, &ma, &md);
+ }
+
+ *dst++ = pack_1x64_32 (ms);
+ w--;
+ }
+
+ /* call prefetch hint to optimize cache load*/
+ cache_prefetch ((__m128i*)src);
+ cache_prefetch ((__m128i*)dst);
+ cache_prefetch ((__m128i*)mask);
+
+ while (w >= 4)
+ {
+ /* fill cache line with next memory */
+ cache_prefetch_next ((__m128i*)src);
+ cache_prefetch_next ((__m128i*)dst);
+ cache_prefetch_next ((__m128i*)mask);
+
+ m = *(uint32_t*) mask;
+ xmm_src = _mm_or_si128 (load_128_unaligned ((__m128i*)src), mask_ff000000);
+
+ if (m == 0xffffffff)
+ {
+ save_128_aligned ((__m128i*)dst, xmm_src);
+ }
+ else
+ {
+ xmm_dst = load_128_aligned ((__m128i*)dst);
+
+ xmm_mask = _mm_unpacklo_epi16 (unpack_32_1x128 (m), _mm_setzero_si128());
+
+ unpack_128_2x128 (xmm_src, &xmm_src_lo, &xmm_src_hi);
+ unpack_128_2x128 (xmm_mask, &xmm_mask_lo, &xmm_mask_hi);
+ unpack_128_2x128 (xmm_dst, &xmm_dst_lo, &xmm_dst_hi);
+
+ expand_alpha_rev_2x128 (xmm_mask_lo, xmm_mask_hi, &xmm_mask_lo, &xmm_mask_hi);
+
+ in_over_2x128 (&xmm_src_lo, &xmm_src_hi, &mask_00ff, &mask_00ff, &xmm_mask_lo, &xmm_mask_hi, &xmm_dst_lo, &xmm_dst_hi);
+
+ save_128_aligned ((__m128i*)dst, pack_2x128_128 (xmm_dst_lo, xmm_dst_hi));
+ }
+
+ src += 4;
+ dst += 4;
+ mask += 4;
+ w -= 4;
+ }
+
+ while (w)
+ {
+ m = (uint32_t) *mask++;
+
+ if (m)
+ {
+ s = 0xff000000 | *src;
+
+ if (m == 0xff)
+ {
+ *dst = s;
+ }
+ else
+ {
+ __m64 ma, md, ms;
+
+ d = *dst;
+
+ ma = expand_alpha_rev_1x64 (unpack_32_1x64 (m));
+ md = unpack_32_1x64 (d);
+ ms = unpack_32_1x64 (s);
+
+ *dst = pack_1x64_32 (in_over_1x64 (&ms, &mask_x00ff, &ma, &md));
+ }
+
+ }
+
+ src++;
+ dst++;
+ w--;
+ }
+ }
+
+ _mm_empty ();
+}
+
+static void
+sse2_composite_over_8888_8_8888 (pixman_implementation_t *imp,
+ pixman_op_t op,
+ pixman_image_t * src_image,
+ pixman_image_t * mask_image,
+ pixman_image_t * dst_image,
+ int32_t src_x,
+ int32_t src_y,
+ int32_t mask_x,
+ int32_t mask_y,
+ int32_t dest_x,
+ int32_t dest_y,
+ int32_t width,
+ int32_t height)
+{
+ uint32_t *src, *src_line, s;
+ uint32_t *dst, *dst_line, d;
+ uint8_t *mask, *mask_line;
+ uint32_t m;
+ int src_stride, mask_stride, dst_stride;
+ int32_t w;
+
+ __m128i xmm_src, xmm_src_lo, xmm_src_hi, xmm_srca_lo, xmm_srca_hi;
+ __m128i xmm_dst, xmm_dst_lo, xmm_dst_hi;
+ __m128i xmm_mask, xmm_mask_lo, xmm_mask_hi;
+
+ PIXMAN_IMAGE_GET_LINE (
+ dst_image, dest_x, dest_y, uint32_t, dst_stride, dst_line, 1);
+ PIXMAN_IMAGE_GET_LINE (
+ mask_image, mask_x, mask_y, uint8_t, mask_stride, mask_line, 1);
+ PIXMAN_IMAGE_GET_LINE (
+ src_image, src_x, src_y, uint32_t, src_stride, src_line, 1);
+
+ while (height--)
+ {
+ src = src_line;
+ src_line += src_stride;
+ dst = dst_line;
+ dst_line += dst_stride;
+ mask = mask_line;
+ mask_line += mask_stride;
+
+ w = width;
+
+ /* call prefetch hint to optimize cache load*/
+ cache_prefetch ((__m128i *)src);
+ cache_prefetch ((__m128i *)dst);
+ cache_prefetch ((__m128i *)mask);
+
+ while (w && (unsigned long)dst & 15)
+ {
+ uint32_t sa;
+
+ s = *src++;
+ m = (uint32_t) *mask++;
+ d = *dst;
+
+ sa = s >> 24;
+
+ if (m)
+ {
+ if (sa == 0xff && m == 0xff)
+ {
+ *dst = s;
+ }
+ else
+ {
+ __m64 ms, md, ma, msa;
+
+ ma = expand_alpha_rev_1x64 (load_32_1x64 (m));
+ ms = unpack_32_1x64 (s);
+ md = unpack_32_1x64 (d);
+
+ msa = expand_alpha_rev_1x64 (load_32_1x64 (sa));
+
+ *dst = pack_1x64_32 (in_over_1x64 (&ms, &msa, &ma, &md));
+ }
+ }
+
+ dst++;
+ w--;
+ }
+
+ /* call prefetch hint to optimize cache load*/
+ cache_prefetch ((__m128i *)src);
+ cache_prefetch ((__m128i *)dst);
+ cache_prefetch ((__m128i *)mask);
+
+ while (w >= 4)
+ {
+ /* fill cache line with next memory */
+ cache_prefetch_next ((__m128i *)src);
+ cache_prefetch_next ((__m128i *)dst);
+ cache_prefetch_next ((__m128i *)mask);
+
+ m = *(uint32_t *) mask;
+
+ if (m)
+ {
+ xmm_src = load_128_unaligned ((__m128i*)src);
+
+ if (m == 0xffffffff && is_opaque (xmm_src))
+ {
+ save_128_aligned ((__m128i *)dst, xmm_src);
+ }
+ else
+ {
+ xmm_dst = load_128_aligned ((__m128i *)dst);
+
+ xmm_mask = _mm_unpacklo_epi16 (unpack_32_1x128 (m), _mm_setzero_si128());
+
+ unpack_128_2x128 (xmm_src, &xmm_src_lo, &xmm_src_hi);
+ unpack_128_2x128 (xmm_mask, &xmm_mask_lo, &xmm_mask_hi);
+ unpack_128_2x128 (xmm_dst, &xmm_dst_lo, &xmm_dst_hi);
+
+ expand_alpha_2x128 (xmm_src_lo, xmm_src_hi, &xmm_srca_lo, &xmm_srca_hi);
+ expand_alpha_rev_2x128 (xmm_mask_lo, xmm_mask_hi, &xmm_mask_lo, &xmm_mask_hi);
+
+ in_over_2x128 (&xmm_src_lo, &xmm_src_hi, &xmm_srca_lo, &xmm_srca_hi,
+ &xmm_mask_lo, &xmm_mask_hi, &xmm_dst_lo, &xmm_dst_hi);
+
+ save_128_aligned ((__m128i*)dst, pack_2x128_128 (xmm_dst_lo, xmm_dst_hi));
+ }
+ }
+
+ src += 4;
+ dst += 4;
+ mask += 4;
+ w -= 4;
+ }
+
+ while (w)
+ {
+ uint32_t sa;
+
+ s = *src++;
+ m = (uint32_t) *mask++;
+ d = *dst;
+
+ sa = s >> 24;
+
+ if (m)
+ {
+ if (sa == 0xff && m == 0xff)
+ {
+ *dst = s;
+ }
+ else
+ {
+ __m64 ms, md, ma, msa;
+
+ ma = expand_alpha_rev_1x64 (load_32_1x64 (m));
+ ms = unpack_32_1x64 (s);
+ md = unpack_32_1x64 (d);
+
+ msa = expand_alpha_rev_1x64 (load_32_1x64 (sa));
+
+ *dst = pack_1x64_32 (in_over_1x64 (&ms, &msa, &ma, &md));
+ }
+ }
+
+ dst++;
+ w--;
+ }
+ }
+
+ _mm_empty ();
+}
+
+static void
+sse2_composite_over_reverse_n_8888 (pixman_implementation_t *imp,
+ pixman_op_t op,
+ pixman_image_t * src_image,
+ pixman_image_t * mask_image,
+ pixman_image_t * dst_image,
+ int32_t src_x,
+ int32_t src_y,
+ int32_t mask_x,
+ int32_t mask_y,
+ int32_t dest_x,
+ int32_t dest_y,
+ int32_t width,
+ int32_t height)
+{
+ uint32_t src;
+ uint32_t *dst_line, *dst;
+ __m128i xmm_src;
+ __m128i xmm_dst, xmm_dst_lo, xmm_dst_hi;
+ __m128i xmm_dsta_hi, xmm_dsta_lo;
+ int dst_stride;
+ int32_t w;
+
+ src = _pixman_image_get_solid (src_image, dst_image->bits.format);
+
+ if (src == 0)
+ return;
+
+ PIXMAN_IMAGE_GET_LINE (
+ dst_image, dest_x, dest_y, uint32_t, dst_stride, dst_line, 1);
+
+ xmm_src = expand_pixel_32_1x128 (src);
+
+ while (height--)
+ {
+ dst = dst_line;
+
+ /* call prefetch hint to optimize cache load*/
+ cache_prefetch ((__m128i*)dst);
+
+ dst_line += dst_stride;
+ w = width;
+
+ while (w && (unsigned long)dst & 15)
+ {
+ __m64 vd;
+
+ vd = unpack_32_1x64 (*dst);
+
+ *dst = pack_1x64_32 (over_1x64 (vd, expand_alpha_1x64 (vd),
+ _mm_movepi64_pi64 (xmm_src)));
+ w--;
+ dst++;
+ }
+
+ cache_prefetch ((__m128i*)dst);
+
+ while (w >= 4)
+ {
+ __m128i tmp_lo, tmp_hi;
+
+ /* fill cache line with next memory */
+ cache_prefetch_next ((__m128i*)(dst + 4));
+
+ xmm_dst = load_128_aligned ((__m128i*)dst);
+
+ unpack_128_2x128 (xmm_dst, &xmm_dst_lo, &xmm_dst_hi);
+ expand_alpha_2x128 (xmm_dst_lo, xmm_dst_hi, &xmm_dsta_lo, &xmm_dsta_hi);
+
+ tmp_lo = xmm_src;
+ tmp_hi = xmm_src;
+
+ over_2x128 (&xmm_dst_lo, &xmm_dst_hi,
+ &xmm_dsta_lo, &xmm_dsta_hi,
+ &tmp_lo, &tmp_hi);
+
+ save_128_aligned (
+ (__m128i*)dst, pack_2x128_128 (tmp_lo, tmp_hi));
+
+ w -= 4;
+ dst += 4;
+ }
+
+ while (w)
+ {
+ __m64 vd;
+
+ vd = unpack_32_1x64 (*dst);
+
+ *dst = pack_1x64_32 (over_1x64 (vd, expand_alpha_1x64 (vd),
+ _mm_movepi64_pi64 (xmm_src)));
+ w--;
+ dst++;
+ }
+
+ }
+
+ _mm_empty ();
+}
+
+static void
+sse2_composite_over_8888_8888_8888 (pixman_implementation_t *imp,
+ pixman_op_t op,
+ pixman_image_t * src_image,
+ pixman_image_t * mask_image,
+ pixman_image_t * dst_image,
+ int32_t src_x,
+ int32_t src_y,
+ int32_t mask_x,
+ int32_t mask_y,
+ int32_t dest_x,
+ int32_t dest_y,
+ int32_t width,
+ int32_t height)
+{
+ uint32_t *src, *src_line, s;
+ uint32_t *dst, *dst_line, d;
+ uint32_t *mask, *mask_line;
+ uint32_t m;
+ int src_stride, mask_stride, dst_stride;
+ int32_t w;
+
+ __m128i xmm_src, xmm_src_lo, xmm_src_hi, xmm_srca_lo, xmm_srca_hi;
+ __m128i xmm_dst, xmm_dst_lo, xmm_dst_hi;
+ __m128i xmm_mask, xmm_mask_lo, xmm_mask_hi;
+
+ PIXMAN_IMAGE_GET_LINE (
+ dst_image, dest_x, dest_y, uint32_t, dst_stride, dst_line, 1);
+ PIXMAN_IMAGE_GET_LINE (
+ mask_image, mask_x, mask_y, uint32_t, mask_stride, mask_line, 1);
+ PIXMAN_IMAGE_GET_LINE (
+ src_image, src_x, src_y, uint32_t, src_stride, src_line, 1);
+
+ while (height--)
+ {
+ src = src_line;
+ src_line += src_stride;
+ dst = dst_line;
+ dst_line += dst_stride;
+ mask = mask_line;
+ mask_line += mask_stride;
+
+ w = width;
+
+ /* call prefetch hint to optimize cache load*/
+ cache_prefetch ((__m128i *)src);
+ cache_prefetch ((__m128i *)dst);
+ cache_prefetch ((__m128i *)mask);
+
+ while (w && (unsigned long)dst & 15)
+ {
+ uint32_t sa;
+
+ s = *src++;
+ m = (*mask++) >> 24;
+ d = *dst;
+
+ sa = s >> 24;
+
+ if (m)
+ {
+ if (sa == 0xff && m == 0xff)
+ {
+ *dst = s;
+ }
+ else
+ {
+ __m64 ms, md, ma, msa;
+
+ ma = expand_alpha_rev_1x64 (load_32_1x64 (m));
+ ms = unpack_32_1x64 (s);
+ md = unpack_32_1x64 (d);
+
+ msa = expand_alpha_rev_1x64 (load_32_1x64 (sa));
+
+ *dst = pack_1x64_32 (in_over_1x64 (&ms, &msa, &ma, &md));
+ }
+ }
+
+ dst++;
+ w--;
+ }
+
+ /* call prefetch hint to optimize cache load*/
+ cache_prefetch ((__m128i *)src);
+ cache_prefetch ((__m128i *)dst);
+ cache_prefetch ((__m128i *)mask);
+
+ while (w >= 4)
+ {
+ /* fill cache line with next memory */
+ cache_prefetch_next ((__m128i *)src);
+ cache_prefetch_next ((__m128i *)dst);
+ cache_prefetch_next ((__m128i *)mask);
+
+ xmm_mask = load_128_unaligned ((__m128i*)mask);
+
+ if (!is_transparent (xmm_mask))
+ {
+ xmm_src = load_128_unaligned ((__m128i*)src);
+
+ if (is_opaque (xmm_mask) && is_opaque (xmm_src))
+ {
+ save_128_aligned ((__m128i *)dst, xmm_src);
+ }
+ else
+ {
+ xmm_dst = load_128_aligned ((__m128i *)dst);
+
+ unpack_128_2x128 (xmm_src, &xmm_src_lo, &xmm_src_hi);
+ unpack_128_2x128 (xmm_mask, &xmm_mask_lo, &xmm_mask_hi);
+ unpack_128_2x128 (xmm_dst, &xmm_dst_lo, &xmm_dst_hi);
+
+ expand_alpha_2x128 (xmm_src_lo, xmm_src_hi, &xmm_srca_lo, &xmm_srca_hi);
+ expand_alpha_2x128 (xmm_mask_lo, xmm_mask_hi, &xmm_mask_lo, &xmm_mask_hi);
+
+ in_over_2x128 (&xmm_src_lo, &xmm_src_hi, &xmm_srca_lo, &xmm_srca_hi,
+ &xmm_mask_lo, &xmm_mask_hi, &xmm_dst_lo, &xmm_dst_hi);
+
+ save_128_aligned ((__m128i*)dst, pack_2x128_128 (xmm_dst_lo, xmm_dst_hi));
+ }
+ }
+
+ src += 4;
+ dst += 4;
+ mask += 4;
+ w -= 4;
+ }
+
+ while (w)
+ {
+ uint32_t sa;
+
+ s = *src++;
+ m = (*mask++) >> 24;
+ d = *dst;
+
+ sa = s >> 24;
+
+ if (m)
+ {
+ if (sa == 0xff && m == 0xff)
+ {
+ *dst = s;
+ }
+ else
+ {
+ __m64 ms, md, ma, msa;
+
+ ma = expand_alpha_rev_1x64 (load_32_1x64 (m));
+ ms = unpack_32_1x64 (s);
+ md = unpack_32_1x64 (d);
+
+ msa = expand_alpha_rev_1x64 (load_32_1x64 (sa));
+
+ *dst = pack_1x64_32 (in_over_1x64 (&ms, &msa, &ma, &md));
+ }
+ }
+
+ dst++;
+ w--;
+ }
+ }
+
+ _mm_empty ();
+}
+
+static const pixman_fast_path_t sse2_fast_paths[] =
+{
+ /* PIXMAN_OP_OVER */
+ PIXMAN_STD_FAST_PATH (OVER, solid, a8, r5g6b5, sse2_composite_over_n_8_0565),
+ PIXMAN_STD_FAST_PATH (OVER, solid, a8, b5g6r5, sse2_composite_over_n_8_0565),
+ PIXMAN_STD_FAST_PATH (OVER, solid, null, a8r8g8b8, sse2_composite_over_n_8888),
+ PIXMAN_STD_FAST_PATH (OVER, solid, null, x8r8g8b8, sse2_composite_over_n_8888),
+ PIXMAN_STD_FAST_PATH (OVER, solid, null, r5g6b5, sse2_composite_over_n_0565),
+ PIXMAN_STD_FAST_PATH (OVER, a8r8g8b8, null, a8r8g8b8, sse2_composite_over_8888_8888),
+ PIXMAN_STD_FAST_PATH (OVER, a8r8g8b8, null, x8r8g8b8, sse2_composite_over_8888_8888),
+ PIXMAN_STD_FAST_PATH (OVER, a8b8g8r8, null, a8b8g8r8, sse2_composite_over_8888_8888),
+ PIXMAN_STD_FAST_PATH (OVER, a8b8g8r8, null, x8b8g8r8, sse2_composite_over_8888_8888),
+ PIXMAN_STD_FAST_PATH (OVER, a8r8g8b8, null, r5g6b5, sse2_composite_over_8888_0565),
+ PIXMAN_STD_FAST_PATH (OVER, a8b8g8r8, null, b5g6r5, sse2_composite_over_8888_0565),
+ PIXMAN_STD_FAST_PATH (OVER, solid, a8, a8r8g8b8, sse2_composite_over_n_8_8888),
+ PIXMAN_STD_FAST_PATH (OVER, solid, a8, x8r8g8b8, sse2_composite_over_n_8_8888),
+ PIXMAN_STD_FAST_PATH (OVER, solid, a8, a8b8g8r8, sse2_composite_over_n_8_8888),
+ PIXMAN_STD_FAST_PATH (OVER, solid, a8, x8b8g8r8, sse2_composite_over_n_8_8888),
+ PIXMAN_STD_FAST_PATH (OVER, a8r8g8b8, a8r8g8b8, a8r8g8b8, sse2_composite_over_8888_8888_8888),
+ PIXMAN_STD_FAST_PATH (OVER, a8r8g8b8, a8, x8r8g8b8, sse2_composite_over_8888_8_8888),
+ PIXMAN_STD_FAST_PATH (OVER, a8r8g8b8, a8, a8r8g8b8, sse2_composite_over_8888_8_8888),
+ PIXMAN_STD_FAST_PATH (OVER, a8b8g8r8, a8, x8b8g8r8, sse2_composite_over_8888_8_8888),
+ PIXMAN_STD_FAST_PATH (OVER, a8b8g8r8, a8, a8b8g8r8, sse2_composite_over_8888_8_8888),
+ PIXMAN_STD_FAST_PATH (OVER, x8r8g8b8, a8, x8r8g8b8, sse2_composite_over_x888_8_8888),
+ PIXMAN_STD_FAST_PATH (OVER, x8r8g8b8, a8, a8r8g8b8, sse2_composite_over_x888_8_8888),
+ PIXMAN_STD_FAST_PATH (OVER, x8b8g8r8, a8, x8b8g8r8, sse2_composite_over_x888_8_8888),
+ PIXMAN_STD_FAST_PATH (OVER, x8b8g8r8, a8, a8b8g8r8, sse2_composite_over_x888_8_8888),
+ PIXMAN_STD_FAST_PATH (OVER, x8r8g8b8, solid, a8r8g8b8, sse2_composite_over_x888_n_8888),
+ PIXMAN_STD_FAST_PATH (OVER, x8r8g8b8, solid, x8r8g8b8, sse2_composite_over_x888_n_8888),
+ PIXMAN_STD_FAST_PATH (OVER, x8b8g8r8, solid, a8b8g8r8, sse2_composite_over_x888_n_8888),
+ PIXMAN_STD_FAST_PATH (OVER, x8b8g8r8, solid, x8b8g8r8, sse2_composite_over_x888_n_8888),
+ PIXMAN_STD_FAST_PATH (OVER, a8r8g8b8, solid, a8r8g8b8, sse2_composite_over_8888_n_8888),
+ PIXMAN_STD_FAST_PATH (OVER, a8r8g8b8, solid, x8r8g8b8, sse2_composite_over_8888_n_8888),
+ PIXMAN_STD_FAST_PATH (OVER, a8b8g8r8, solid, a8b8g8r8, sse2_composite_over_8888_n_8888),
+ PIXMAN_STD_FAST_PATH (OVER, a8b8g8r8, solid, x8b8g8r8, sse2_composite_over_8888_n_8888),
+ PIXMAN_STD_FAST_PATH_CA (OVER, solid, a8r8g8b8, a8r8g8b8, sse2_composite_over_n_8888_8888_ca),
+ PIXMAN_STD_FAST_PATH_CA (OVER, solid, a8r8g8b8, x8r8g8b8, sse2_composite_over_n_8888_8888_ca),
+ PIXMAN_STD_FAST_PATH_CA (OVER, solid, a8b8g8r8, a8b8g8r8, sse2_composite_over_n_8888_8888_ca),
+ PIXMAN_STD_FAST_PATH_CA (OVER, solid, a8b8g8r8, x8b8g8r8, sse2_composite_over_n_8888_8888_ca),
+ PIXMAN_STD_FAST_PATH_CA (OVER, solid, a8r8g8b8, r5g6b5, sse2_composite_over_n_8888_0565_ca),
+ PIXMAN_STD_FAST_PATH_CA (OVER, solid, a8b8g8r8, b5g6r5, sse2_composite_over_n_8888_0565_ca),
+ PIXMAN_STD_FAST_PATH (OVER, pixbuf, pixbuf, a8r8g8b8, sse2_composite_over_pixbuf_8888),
+ PIXMAN_STD_FAST_PATH (OVER, pixbuf, pixbuf, x8r8g8b8, sse2_composite_over_pixbuf_8888),
+ PIXMAN_STD_FAST_PATH (OVER, rpixbuf, rpixbuf, a8b8g8r8, sse2_composite_over_pixbuf_8888),
+ PIXMAN_STD_FAST_PATH (OVER, rpixbuf, rpixbuf, x8b8g8r8, sse2_composite_over_pixbuf_8888),
+ PIXMAN_STD_FAST_PATH (OVER, pixbuf, pixbuf, r5g6b5, sse2_composite_over_pixbuf_0565),
+ PIXMAN_STD_FAST_PATH (OVER, rpixbuf, rpixbuf, b5g6r5, sse2_composite_over_pixbuf_0565),
+ PIXMAN_STD_FAST_PATH (OVER, x8r8g8b8, null, x8r8g8b8, sse2_composite_copy_area),
+ PIXMAN_STD_FAST_PATH (OVER, x8b8g8r8, null, x8b8g8r8, sse2_composite_copy_area),
+
+ /* PIXMAN_OP_OVER_REVERSE */
+ PIXMAN_STD_FAST_PATH (OVER_REVERSE, solid, null, a8r8g8b8, sse2_composite_over_reverse_n_8888),
+ PIXMAN_STD_FAST_PATH (OVER_REVERSE, solid, null, a8b8g8r8, sse2_composite_over_reverse_n_8888),
+
+ /* PIXMAN_OP_ADD */
+ PIXMAN_STD_FAST_PATH_CA (ADD, solid, a8r8g8b8, a8r8g8b8, sse2_composite_add_n_8888_8888_ca),
+ PIXMAN_STD_FAST_PATH (ADD, a8, null, a8, sse2_composite_add_8000_8000),
+ PIXMAN_STD_FAST_PATH (ADD, a8r8g8b8, null, a8r8g8b8, sse2_composite_add_8888_8888),
+ PIXMAN_STD_FAST_PATH (ADD, a8b8g8r8, null, a8b8g8r8, sse2_composite_add_8888_8888),
+ PIXMAN_STD_FAST_PATH (ADD, solid, a8, a8, sse2_composite_add_n_8_8),
+ PIXMAN_STD_FAST_PATH (ADD, solid, null, a8, sse2_composite_add_n_8),
+
+ /* PIXMAN_OP_SRC */
+ PIXMAN_STD_FAST_PATH (SRC, solid, a8, a8r8g8b8, sse2_composite_src_n_8_8888),
+ PIXMAN_STD_FAST_PATH (SRC, solid, a8, x8r8g8b8, sse2_composite_src_n_8_8888),
+ PIXMAN_STD_FAST_PATH (SRC, solid, a8, a8b8g8r8, sse2_composite_src_n_8_8888),
+ PIXMAN_STD_FAST_PATH (SRC, solid, a8, x8b8g8r8, sse2_composite_src_n_8_8888),
+ PIXMAN_STD_FAST_PATH (SRC, x8r8g8b8, null, a8r8g8b8, sse2_composite_src_x888_8888),
+ PIXMAN_STD_FAST_PATH (SRC, x8b8g8r8, null, a8b8g8r8, sse2_composite_src_x888_8888),
+ PIXMAN_STD_FAST_PATH (SRC, a8r8g8b8, null, a8r8g8b8, sse2_composite_copy_area),
+ PIXMAN_STD_FAST_PATH (SRC, a8b8g8r8, null, a8b8g8r8, sse2_composite_copy_area),
+ PIXMAN_STD_FAST_PATH (SRC, a8r8g8b8, null, x8r8g8b8, sse2_composite_copy_area),
+ PIXMAN_STD_FAST_PATH (SRC, a8b8g8r8, null, x8b8g8r8, sse2_composite_copy_area),
+ PIXMAN_STD_FAST_PATH (SRC, x8r8g8b8, null, x8r8g8b8, sse2_composite_copy_area),
+ PIXMAN_STD_FAST_PATH (SRC, x8b8g8r8, null, x8b8g8r8, sse2_composite_copy_area),
+ PIXMAN_STD_FAST_PATH (SRC, r5g6b5, null, r5g6b5, sse2_composite_copy_area),
+ PIXMAN_STD_FAST_PATH (SRC, b5g6r5, null, b5g6r5, sse2_composite_copy_area),
+
+ /* PIXMAN_OP_IN */
+ PIXMAN_STD_FAST_PATH (IN, a8, null, a8, sse2_composite_in_8_8),
+ PIXMAN_STD_FAST_PATH (IN, solid, a8, a8, sse2_composite_in_n_8_8),
+ PIXMAN_STD_FAST_PATH (IN, solid, null, a8, sse2_composite_in_n_8),
+
+ { PIXMAN_OP_NONE },
+};
+
+static pixman_bool_t
+sse2_blt (pixman_implementation_t *imp,
+ uint32_t * src_bits,
+ uint32_t * dst_bits,
+ int src_stride,
+ int dst_stride,
+ int src_bpp,
+ int dst_bpp,
+ int src_x,
+ int src_y,
+ int dst_x,
+ int dst_y,
+ int width,
+ int height)
+{
+ if (!pixman_blt_sse2 (
+ src_bits, dst_bits, src_stride, dst_stride, src_bpp, dst_bpp,
+ src_x, src_y, dst_x, dst_y, width, height))
+
+ {
+ return _pixman_implementation_blt (
+ imp->delegate,
+ src_bits, dst_bits, src_stride, dst_stride, src_bpp, dst_bpp,
+ src_x, src_y, dst_x, dst_y, width, height);
+ }
+
+ return TRUE;
+}
+
+#if defined(__GNUC__) && !defined(__x86_64__) && !defined(__amd64__)
+__attribute__((__force_align_arg_pointer__))
+#endif
+static pixman_bool_t
+sse2_fill (pixman_implementation_t *imp,
+ uint32_t * bits,
+ int stride,
+ int bpp,
+ int x,
+ int y,
+ int width,
+ int height,
+ uint32_t xor)
+{
+ if (!pixman_fill_sse2 (bits, stride, bpp, x, y, width, height, xor))
+ {
+ return _pixman_implementation_fill (
+ imp->delegate, bits, stride, bpp, x, y, width, height, xor);
+ }
+
+ return TRUE;
+}
+
+#if defined(__GNUC__) && !defined(__x86_64__) && !defined(__amd64__)
+__attribute__((__force_align_arg_pointer__))
+#endif
+pixman_implementation_t *
+_pixman_implementation_create_sse2 (void)
+{
+#ifdef USE_MMX
+ pixman_implementation_t *fallback = _pixman_implementation_create_mmx ();
+#else
+ pixman_implementation_t *fallback = _pixman_implementation_create_fast_path ();
+#endif
+ pixman_implementation_t *imp = _pixman_implementation_create (fallback, sse2_fast_paths);
+
+ /* SSE2 constants */
+ mask_565_r = create_mask_2x32_128 (0x00f80000, 0x00f80000);
+ mask_565_g1 = create_mask_2x32_128 (0x00070000, 0x00070000);
+ mask_565_g2 = create_mask_2x32_128 (0x000000e0, 0x000000e0);
+ mask_565_b = create_mask_2x32_128 (0x0000001f, 0x0000001f);
+ mask_red = create_mask_2x32_128 (0x00f80000, 0x00f80000);
+ mask_green = create_mask_2x32_128 (0x0000fc00, 0x0000fc00);
+ mask_blue = create_mask_2x32_128 (0x000000f8, 0x000000f8);
+ mask_565_fix_rb = create_mask_2x32_128 (0x00e000e0, 0x00e000e0);
+ mask_565_fix_g = create_mask_2x32_128 (0x0000c000, 0x0000c000);
+ mask_0080 = create_mask_16_128 (0x0080);
+ mask_00ff = create_mask_16_128 (0x00ff);
+ mask_0101 = create_mask_16_128 (0x0101);
+ mask_ffff = create_mask_16_128 (0xffff);
+ mask_ff000000 = create_mask_2x32_128 (0xff000000, 0xff000000);
+ mask_alpha = create_mask_2x32_128 (0x00ff0000, 0x00000000);
+
+ /* MMX constants */
+ mask_x565_rgb = create_mask_2x32_64 (0x000001f0, 0x003f001f);
+ mask_x565_unpack = create_mask_2x32_64 (0x00000084, 0x04100840);
+
+ mask_x0080 = create_mask_16_64 (0x0080);
+ mask_x00ff = create_mask_16_64 (0x00ff);
+ mask_x0101 = create_mask_16_64 (0x0101);
+ mask_x_alpha = create_mask_2x32_64 (0x00ff0000, 0x00000000);
+
+ _mm_empty ();
+
+ /* Set up function pointers */
+
+ /* SSE code patch for fbcompose.c */
+ imp->combine_32[PIXMAN_OP_OVER] = sse2_combine_over_u;
+ imp->combine_32[PIXMAN_OP_OVER_REVERSE] = sse2_combine_over_reverse_u;
+ imp->combine_32[PIXMAN_OP_IN] = sse2_combine_in_u;
+ imp->combine_32[PIXMAN_OP_IN_REVERSE] = sse2_combine_in_reverse_u;
+ imp->combine_32[PIXMAN_OP_OUT] = sse2_combine_out_u;
+ imp->combine_32[PIXMAN_OP_OUT_REVERSE] = sse2_combine_out_reverse_u;
+ imp->combine_32[PIXMAN_OP_ATOP] = sse2_combine_atop_u;
+ imp->combine_32[PIXMAN_OP_ATOP_REVERSE] = sse2_combine_atop_reverse_u;
+ imp->combine_32[PIXMAN_OP_XOR] = sse2_combine_xor_u;
+ imp->combine_32[PIXMAN_OP_ADD] = sse2_combine_add_u;
+
+ imp->combine_32[PIXMAN_OP_SATURATE] = sse2_combine_saturate_u;
+
+ imp->combine_32_ca[PIXMAN_OP_SRC] = sse2_combine_src_ca;
+ imp->combine_32_ca[PIXMAN_OP_OVER] = sse2_combine_over_ca;
+ imp->combine_32_ca[PIXMAN_OP_OVER_REVERSE] = sse2_combine_over_reverse_ca;
+ imp->combine_32_ca[PIXMAN_OP_IN] = sse2_combine_in_ca;
+ imp->combine_32_ca[PIXMAN_OP_IN_REVERSE] = sse2_combine_in_reverse_ca;
+ imp->combine_32_ca[PIXMAN_OP_OUT] = sse2_combine_out_ca;
+ imp->combine_32_ca[PIXMAN_OP_OUT_REVERSE] = sse2_combine_out_reverse_ca;
+ imp->combine_32_ca[PIXMAN_OP_ATOP] = sse2_combine_atop_ca;
+ imp->combine_32_ca[PIXMAN_OP_ATOP_REVERSE] = sse2_combine_atop_reverse_ca;
+ imp->combine_32_ca[PIXMAN_OP_XOR] = sse2_combine_xor_ca;
+ imp->combine_32_ca[PIXMAN_OP_ADD] = sse2_combine_add_ca;
+
+ imp->blt = sse2_blt;
+ imp->fill = sse2_fill;
+
+ return imp;
+}
+
+#endif /* USE_SSE2 */
diff --git a/pixman/pixman/pixman-version.h b/pixman/pixman/pixman-version.h deleted file mode 100644 index 4d67673d4..000000000 --- a/pixman/pixman/pixman-version.h +++ /dev/null @@ -1,50 +0,0 @@ -/* - * Copyright © 2008 Red Hat, Inc. - * - * Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, copy, - * modify, merge, publish, distribute, sublicense, and/or sell copies - * of the Software, and to permit persons to whom the Software is - * furnished to do so, subject to the following conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF - * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS - * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN - * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN - * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE - * SOFTWARE. - * - * Author: Carl D. Worth <cworth@cworth.org> - */ - -#ifndef PIXMAN_VERSION_H__ -#define PIXMAN_VERSION_H__ - -#ifndef PIXMAN_H__ -# error pixman-version.h should only be included by pixman.h -#endif - -#define PIXMAN_VERSION_MAJOR 0 -#define PIXMAN_VERSION_MINOR 18 -#define PIXMAN_VERSION_MICRO 2 - -#define PIXMAN_VERSION_STRING "0.18.2" - -#define PIXMAN_VERSION_ENCODE(major, minor, micro) ( \ - ((major) * 10000) \ - + ((minor) * 100) \ - + ((micro) * 1)) - -#define PIXMAN_VERSION PIXMAN_VERSION_ENCODE( \ - PIXMAN_VERSION_MAJOR, \ - PIXMAN_VERSION_MINOR, \ - PIXMAN_VERSION_MICRO) - -#endif /* PIXMAN_VERSION_H__ */ diff --git a/pixman/pixman/pixman.c b/pixman/pixman/pixman.c index 56c95368e..a27e33b2c 100644 --- a/pixman/pixman/pixman.c +++ b/pixman/pixman/pixman.c @@ -1,1221 +1,1245 @@ -/* -*- Mode: c; c-basic-offset: 4; tab-width: 8; indent-tabs-mode: t; -*- */ -/* - * Copyright © 2000 SuSE, Inc. - * Copyright © 2007 Red Hat, Inc. - * - * Permission to use, copy, modify, distribute, and sell this software and its - * documentation for any purpose is hereby granted without fee, provided that - * the above copyright notice appear in all copies and that both that - * copyright notice and this permission notice appear in supporting - * documentation, and that the name of SuSE not be used in advertising or - * publicity pertaining to distribution of the software without specific, - * written prior permission. SuSE makes no representations about the - * suitability of this software for any purpose. It is provided "as is" - * without express or implied warranty. - * - * SuSE DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE, INCLUDING ALL - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO EVENT SHALL SuSE - * BE LIABLE FOR ANY SPECIAL, INDIRECT OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES - * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION - * OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN - * CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. - * - * Author: Keith Packard, SuSE, Inc. - */ - -#ifdef HAVE_CONFIG_H -#include <config.h> -#endif -#include "pixman-private.h" - -#include <stdlib.h> - -static pixman_implementation_t *imp; - -typedef struct operator_info_t operator_info_t; - -struct operator_info_t -{ - uint8_t opaque_info[4]; -}; - -#define PACK(neither, src, dest, both) \ - {{ (uint8_t)PIXMAN_OP_ ## neither, \ - (uint8_t)PIXMAN_OP_ ## src, \ - (uint8_t)PIXMAN_OP_ ## dest, \ - (uint8_t)PIXMAN_OP_ ## both }} - -static const operator_info_t operator_table[] = -{ - /* Neither Opaque Src Opaque Dst Opaque Both Opaque */ - PACK (CLEAR, CLEAR, CLEAR, CLEAR), - PACK (SRC, SRC, SRC, SRC), - PACK (DST, DST, DST, DST), - PACK (OVER, SRC, OVER, SRC), - PACK (OVER_REVERSE, OVER_REVERSE, DST, DST), - PACK (IN, IN, SRC, SRC), - PACK (IN_REVERSE, DST, IN_REVERSE, DST), - PACK (OUT, OUT, CLEAR, CLEAR), - PACK (OUT_REVERSE, CLEAR, OUT_REVERSE, CLEAR), - PACK (ATOP, IN, OVER, SRC), - PACK (ATOP_REVERSE, OVER_REVERSE, IN_REVERSE, DST), - PACK (XOR, OUT, OUT_REVERSE, CLEAR), - PACK (ADD, ADD, ADD, ADD), - PACK (SATURATE, OVER_REVERSE, DST, DST), - - {{ 0 /* 0x0e */ }}, - {{ 0 /* 0x0f */ }}, - - PACK (CLEAR, CLEAR, CLEAR, CLEAR), - PACK (SRC, SRC, SRC, SRC), - PACK (DST, DST, DST, DST), - PACK (DISJOINT_OVER, DISJOINT_OVER, DISJOINT_OVER, DISJOINT_OVER), - PACK (DISJOINT_OVER_REVERSE, DISJOINT_OVER_REVERSE, DISJOINT_OVER_REVERSE, DISJOINT_OVER_REVERSE), - PACK (DISJOINT_IN, DISJOINT_IN, DISJOINT_IN, DISJOINT_IN), - PACK (DISJOINT_IN_REVERSE, DISJOINT_IN_REVERSE, DISJOINT_IN_REVERSE, DISJOINT_IN_REVERSE), - PACK (DISJOINT_OUT, DISJOINT_OUT, DISJOINT_OUT, DISJOINT_OUT), - PACK (DISJOINT_OUT_REVERSE, DISJOINT_OUT_REVERSE, DISJOINT_OUT_REVERSE, DISJOINT_OUT_REVERSE), - PACK (DISJOINT_ATOP, DISJOINT_ATOP, DISJOINT_ATOP, DISJOINT_ATOP), - PACK (DISJOINT_ATOP_REVERSE, DISJOINT_ATOP_REVERSE, DISJOINT_ATOP_REVERSE, DISJOINT_ATOP_REVERSE), - PACK (DISJOINT_XOR, DISJOINT_XOR, DISJOINT_XOR, DISJOINT_XOR), - - {{ 0 /* 0x1c */ }}, - {{ 0 /* 0x1d */ }}, - {{ 0 /* 0x1e */ }}, - {{ 0 /* 0x1f */ }}, - - PACK (CLEAR, CLEAR, CLEAR, CLEAR), - PACK (SRC, SRC, SRC, SRC), - PACK (DST, DST, DST, DST), - PACK (CONJOINT_OVER, CONJOINT_OVER, CONJOINT_OVER, CONJOINT_OVER), - PACK (CONJOINT_OVER_REVERSE, CONJOINT_OVER_REVERSE, CONJOINT_OVER_REVERSE, CONJOINT_OVER_REVERSE), - PACK (CONJOINT_IN, CONJOINT_IN, CONJOINT_IN, CONJOINT_IN), - PACK (CONJOINT_IN_REVERSE, CONJOINT_IN_REVERSE, CONJOINT_IN_REVERSE, CONJOINT_IN_REVERSE), - PACK (CONJOINT_OUT, CONJOINT_OUT, CONJOINT_OUT, CONJOINT_OUT), - PACK (CONJOINT_OUT_REVERSE, CONJOINT_OUT_REVERSE, CONJOINT_OUT_REVERSE, CONJOINT_OUT_REVERSE), - PACK (CONJOINT_ATOP, CONJOINT_ATOP, CONJOINT_ATOP, CONJOINT_ATOP), - PACK (CONJOINT_ATOP_REVERSE, CONJOINT_ATOP_REVERSE, CONJOINT_ATOP_REVERSE, CONJOINT_ATOP_REVERSE), - PACK (CONJOINT_XOR, CONJOINT_XOR, CONJOINT_XOR, CONJOINT_XOR), - - {{ 0 /* 0x2c */ }}, - {{ 0 /* 0x2d */ }}, - {{ 0 /* 0x2e */ }}, - {{ 0 /* 0x2f */ }}, - - PACK (MULTIPLY, MULTIPLY, MULTIPLY, MULTIPLY), - PACK (SCREEN, SCREEN, SCREEN, SCREEN), - PACK (OVERLAY, OVERLAY, OVERLAY, OVERLAY), - PACK (DARKEN, DARKEN, DARKEN, DARKEN), - PACK (LIGHTEN, LIGHTEN, LIGHTEN, LIGHTEN), - PACK (COLOR_DODGE, COLOR_DODGE, COLOR_DODGE, COLOR_DODGE), - PACK (COLOR_BURN, COLOR_BURN, COLOR_BURN, COLOR_BURN), - PACK (HARD_LIGHT, HARD_LIGHT, HARD_LIGHT, HARD_LIGHT), - PACK (SOFT_LIGHT, SOFT_LIGHT, SOFT_LIGHT, SOFT_LIGHT), - PACK (DIFFERENCE, DIFFERENCE, DIFFERENCE, DIFFERENCE), - PACK (EXCLUSION, EXCLUSION, EXCLUSION, EXCLUSION), - PACK (HSL_HUE, HSL_HUE, HSL_HUE, HSL_HUE), - PACK (HSL_SATURATION, HSL_SATURATION, HSL_SATURATION, HSL_SATURATION), - PACK (HSL_COLOR, HSL_COLOR, HSL_COLOR, HSL_COLOR), - PACK (HSL_LUMINOSITY, HSL_LUMINOSITY, HSL_LUMINOSITY, HSL_LUMINOSITY), -}; - -/* - * Optimize the current operator based on opacity of source or destination - * The output operator should be mathematically equivalent to the source. - */ -static pixman_op_t -optimize_operator (pixman_op_t op, - uint32_t src_flags, - uint32_t mask_flags, - uint32_t dst_flags) -{ - pixman_bool_t is_source_opaque, is_dest_opaque; - int opaqueness; - - is_source_opaque = ((src_flags & mask_flags) & FAST_PATH_IS_OPAQUE) != 0; - is_dest_opaque = (dst_flags & FAST_PATH_IS_OPAQUE) != 0; - - opaqueness = ((is_dest_opaque << 1) | is_source_opaque); - - return operator_table[op].opaque_info[opaqueness]; -} - -static void -apply_workaround (pixman_image_t *image, - int32_t * x, - int32_t * y, - uint32_t ** save_bits, - int * save_dx, - int * save_dy) -{ - if (image && (image->common.flags & FAST_PATH_NEEDS_WORKAROUND)) - { - /* Some X servers generate images that point to the - * wrong place in memory, but then set the clip region - * to point to the right place. Because of an old bug - * in pixman, this would actually work. - * - * Here we try and undo the damage - */ - int bpp = PIXMAN_FORMAT_BPP (image->bits.format) / 8; - pixman_box32_t *extents; - uint8_t *t; - int dx, dy; - - extents = pixman_region32_extents (&(image->common.clip_region)); - dx = extents->x1; - dy = extents->y1; - - *save_bits = image->bits.bits; - - *x -= dx; - *y -= dy; - pixman_region32_translate (&(image->common.clip_region), -dx, -dy); - - t = (uint8_t *)image->bits.bits; - t += dy * image->bits.rowstride * 4 + dx * bpp; - image->bits.bits = (uint32_t *)t; - - *save_dx = dx; - *save_dy = dy; - } -} - -static void -unapply_workaround (pixman_image_t *image, uint32_t *bits, int dx, int dy) -{ - if (image && (image->common.flags & FAST_PATH_NEEDS_WORKAROUND)) - { - image->bits.bits = bits; - pixman_region32_translate (&image->common.clip_region, dx, dy); - } -} - -/* - * Computing composite region - */ -static inline pixman_bool_t -clip_general_image (pixman_region32_t * region, - pixman_region32_t * clip, - int dx, - int dy) -{ - if (pixman_region32_n_rects (region) == 1 && - pixman_region32_n_rects (clip) == 1) - { - pixman_box32_t * rbox = pixman_region32_rectangles (region, NULL); - pixman_box32_t * cbox = pixman_region32_rectangles (clip, NULL); - int v; - - if (rbox->x1 < (v = cbox->x1 + dx)) - rbox->x1 = v; - if (rbox->x2 > (v = cbox->x2 + dx)) - rbox->x2 = v; - if (rbox->y1 < (v = cbox->y1 + dy)) - rbox->y1 = v; - if (rbox->y2 > (v = cbox->y2 + dy)) - rbox->y2 = v; - if (rbox->x1 >= rbox->x2 || rbox->y1 >= rbox->y2) - { - pixman_region32_init (region); - return FALSE; - } - } - else if (!pixman_region32_not_empty (clip)) - { - return FALSE; - } - else - { - if (dx || dy) - pixman_region32_translate (region, -dx, -dy); - - if (!pixman_region32_intersect (region, region, clip)) - return FALSE; - - if (dx || dy) - pixman_region32_translate (region, dx, dy); - } - - return pixman_region32_not_empty (region); -} - -static inline pixman_bool_t -clip_source_image (pixman_region32_t * region, - pixman_image_t * image, - int dx, - int dy) -{ - /* Source clips are ignored, unless they are explicitly turned on - * and the clip in question was set by an X client. (Because if - * the clip was not set by a client, then it is a hierarchy - * clip and those should always be ignored for sources). - */ - if (!image->common.clip_sources || !image->common.client_clip) - return TRUE; - - return clip_general_image (region, - &image->common.clip_region, - dx, dy); -} - -/* - * returns FALSE if the final region is empty. Indistinguishable from - * an allocation failure, but rendering ignores those anyways. - */ -static pixman_bool_t -pixman_compute_composite_region32 (pixman_region32_t * region, - pixman_image_t * src_image, - pixman_image_t * mask_image, - pixman_image_t * dst_image, - int32_t src_x, - int32_t src_y, - int32_t mask_x, - int32_t mask_y, - int32_t dest_x, - int32_t dest_y, - int32_t width, - int32_t height) -{ - region->extents.x1 = dest_x; - region->extents.x2 = dest_x + width; - region->extents.y1 = dest_y; - region->extents.y2 = dest_y + height; - - region->extents.x1 = MAX (region->extents.x1, 0); - region->extents.y1 = MAX (region->extents.y1, 0); - region->extents.x2 = MIN (region->extents.x2, dst_image->bits.width); - region->extents.y2 = MIN (region->extents.y2, dst_image->bits.height); - - region->data = 0; - - /* Check for empty operation */ - if (region->extents.x1 >= region->extents.x2 || - region->extents.y1 >= region->extents.y2) - { - pixman_region32_init (region); - return FALSE; - } - - if (dst_image->common.have_clip_region) - { - if (!clip_general_image (region, &dst_image->common.clip_region, 0, 0)) - { - pixman_region32_fini (region); - return FALSE; - } - } - - if (dst_image->common.alpha_map && dst_image->common.alpha_map->common.have_clip_region) - { - if (!clip_general_image (region, &dst_image->common.alpha_map->common.clip_region, - -dst_image->common.alpha_origin_x, - -dst_image->common.alpha_origin_y)) - { - pixman_region32_fini (region); - return FALSE; - } - } - - /* clip against src */ - if (src_image->common.have_clip_region) - { - if (!clip_source_image (region, src_image, dest_x - src_x, dest_y - src_y)) - { - pixman_region32_fini (region); - return FALSE; - } - } - if (src_image->common.alpha_map && src_image->common.alpha_map->common.have_clip_region) - { - if (!clip_source_image (region, (pixman_image_t *)src_image->common.alpha_map, - dest_x - (src_x - src_image->common.alpha_origin_x), - dest_y - (src_y - src_image->common.alpha_origin_y))) - { - pixman_region32_fini (region); - return FALSE; - } - } - /* clip against mask */ - if (mask_image && mask_image->common.have_clip_region) - { - if (!clip_source_image (region, mask_image, dest_x - mask_x, dest_y - mask_y)) - { - pixman_region32_fini (region); - return FALSE; - } - if (mask_image->common.alpha_map && mask_image->common.alpha_map->common.have_clip_region) - { - if (!clip_source_image (region, (pixman_image_t *)mask_image->common.alpha_map, - dest_x - (mask_x - mask_image->common.alpha_origin_x), - dest_y - (mask_y - mask_image->common.alpha_origin_y))) - { - pixman_region32_fini (region); - return FALSE; - } - } - } - - return TRUE; -} - -static void -walk_region_internal (pixman_implementation_t *imp, - pixman_op_t op, - pixman_image_t * src_image, - pixman_image_t * mask_image, - pixman_image_t * dst_image, - int32_t src_x, - int32_t src_y, - int32_t mask_x, - int32_t mask_y, - int32_t dest_x, - int32_t dest_y, - int32_t width, - int32_t height, - pixman_bool_t src_repeat, - pixman_bool_t mask_repeat, - pixman_region32_t * region, - pixman_composite_func_t composite_rect) -{ - int w, h, w_this, h_this; - int x_msk, y_msk, x_src, y_src, x_dst, y_dst; - int src_dy = src_y - dest_y; - int src_dx = src_x - dest_x; - int mask_dy = mask_y - dest_y; - int mask_dx = mask_x - dest_x; - const pixman_box32_t *pbox; - int n; - - pbox = pixman_region32_rectangles (region, &n); - - /* Fast path for non-repeating sources */ - if (!src_repeat && !mask_repeat) - { - while (n--) - { - (*composite_rect) (imp, op, - src_image, mask_image, dst_image, - pbox->x1 + src_dx, - pbox->y1 + src_dy, - pbox->x1 + mask_dx, - pbox->y1 + mask_dy, - pbox->x1, - pbox->y1, - pbox->x2 - pbox->x1, - pbox->y2 - pbox->y1); - - pbox++; - } - - return; - } - - while (n--) - { - h = pbox->y2 - pbox->y1; - y_src = pbox->y1 + src_dy; - y_msk = pbox->y1 + mask_dy; - y_dst = pbox->y1; - - while (h) - { - h_this = h; - w = pbox->x2 - pbox->x1; - x_src = pbox->x1 + src_dx; - x_msk = pbox->x1 + mask_dx; - x_dst = pbox->x1; - - if (mask_repeat) - { - y_msk = MOD (y_msk, mask_image->bits.height); - if (h_this > mask_image->bits.height - y_msk) - h_this = mask_image->bits.height - y_msk; - } - - if (src_repeat) - { - y_src = MOD (y_src, src_image->bits.height); - if (h_this > src_image->bits.height - y_src) - h_this = src_image->bits.height - y_src; - } - - while (w) - { - w_this = w; - - if (mask_repeat) - { - x_msk = MOD (x_msk, mask_image->bits.width); - if (w_this > mask_image->bits.width - x_msk) - w_this = mask_image->bits.width - x_msk; - } - - if (src_repeat) - { - x_src = MOD (x_src, src_image->bits.width); - if (w_this > src_image->bits.width - x_src) - w_this = src_image->bits.width - x_src; - } - - (*composite_rect) (imp, op, - src_image, mask_image, dst_image, - x_src, y_src, x_msk, y_msk, x_dst, y_dst, - w_this, h_this); - w -= w_this; - - x_src += w_this; - x_msk += w_this; - x_dst += w_this; - } - - h -= h_this; - y_src += h_this; - y_msk += h_this; - y_dst += h_this; - } - - pbox++; - } -} - -#define IS_16BIT(x) (((x) >= INT16_MIN) && ((x) <= INT16_MAX)) - -static force_inline uint32_t -compute_src_extents_flags (pixman_image_t *image, - pixman_box32_t *extents, - int x, - int y) -{ - pixman_box16_t extents16; - uint32_t flags; - - flags = FAST_PATH_COVERS_CLIP; - - if (image->common.type != BITS) - return flags; - - if (image->common.repeat == PIXMAN_REPEAT_NONE && - (x > extents->x1 || y > extents->y1 || - x + image->bits.width < extents->x2 || - y + image->bits.height < extents->y2)) - { - flags &= ~FAST_PATH_COVERS_CLIP; - } - - if (IS_16BIT (extents->x1 - x) && - IS_16BIT (extents->y1 - y) && - IS_16BIT (extents->x2 - x) && - IS_16BIT (extents->y2 - y)) - { - extents16.x1 = extents->x1 - x; - extents16.y1 = extents->y1 - y; - extents16.x2 = extents->x2 - x; - extents16.y2 = extents->y2 - y; - - if (!image->common.transform || - pixman_transform_bounds (image->common.transform, &extents16)) - { - if (extents16.x1 >= 0 && extents16.y1 >= 0 && - extents16.x2 <= image->bits.width && - extents16.y2 <= image->bits.height) - { - flags |= FAST_PATH_SAMPLES_COVER_CLIP; - } - } - } - - if (IS_16BIT (extents->x1 - x - 1) && - IS_16BIT (extents->y1 - y - 1) && - IS_16BIT (extents->x2 - x + 1) && - IS_16BIT (extents->y2 - y + 1)) - { - extents16.x1 = extents->x1 - x - 1; - extents16.y1 = extents->y1 - y - 1; - extents16.x2 = extents->x2 - x + 1; - extents16.y2 = extents->y2 - y + 1; - - if (/* src space expanded by one in dest space fits in 16 bit */ - (!image->common.transform || - pixman_transform_bounds (image->common.transform, &extents16)) && - /* And src image size can be used as 16.16 fixed point */ - image->bits.width < 0x7fff && - image->bits.height < 0x7fff) - { - /* Then we're "16bit safe" */ - flags |= FAST_PATH_16BIT_SAFE; - } - } - - return flags; -} - -#define N_CACHED_FAST_PATHS 8 - -typedef struct -{ - pixman_fast_path_t cache [N_CACHED_FAST_PATHS]; -} cache_t; - -PIXMAN_DEFINE_THREAD_LOCAL (cache_t, fast_path_cache); - -static void -do_composite (pixman_implementation_t *imp, - pixman_op_t op, - pixman_image_t *src, - pixman_image_t *mask, - pixman_image_t *dest, - int src_x, - int src_y, - int mask_x, - int mask_y, - int dest_x, - int dest_y, - int width, - int height) -{ - pixman_format_code_t src_format, mask_format, dest_format; - uint32_t src_flags, mask_flags, dest_flags; - pixman_region32_t region; - pixman_box32_t *extents; - uint32_t *src_bits; - int src_dx, src_dy; - uint32_t *mask_bits; - int mask_dx, mask_dy; - uint32_t *dest_bits; - int dest_dx, dest_dy; - pixman_bool_t need_workaround; - const pixman_fast_path_t *info; - cache_t *cache; - int i; - - src_format = src->common.extended_format_code; - src_flags = src->common.flags; - - if (mask) - { - mask_format = mask->common.extended_format_code; - mask_flags = mask->common.flags; - } - else - { - mask_format = PIXMAN_null; - mask_flags = FAST_PATH_IS_OPAQUE; - } - - dest_format = dest->common.extended_format_code; - dest_flags = dest->common.flags; - - /* Check for pixbufs */ - if ((mask_format == PIXMAN_a8r8g8b8 || mask_format == PIXMAN_a8b8g8r8) && - (src->type == BITS && src->bits.bits == mask->bits.bits) && - (src->common.repeat == mask->common.repeat) && - (src_x == mask_x && src_y == mask_y)) - { - if (src_format == PIXMAN_x8b8g8r8) - src_format = mask_format = PIXMAN_pixbuf; - else if (src_format == PIXMAN_x8r8g8b8) - src_format = mask_format = PIXMAN_rpixbuf; - } - - /* Check for workaround */ - need_workaround = (src_flags | mask_flags | dest_flags) & FAST_PATH_NEEDS_WORKAROUND; - - if (need_workaround) - { - apply_workaround (src, &src_x, &src_y, &src_bits, &src_dx, &src_dy); - apply_workaround (mask, &mask_x, &mask_y, &mask_bits, &mask_dx, &mask_dy); - apply_workaround (dest, &dest_x, &dest_y, &dest_bits, &dest_dx, &dest_dy); - } - - pixman_region32_init (®ion); - - if (!pixman_compute_composite_region32 ( - ®ion, src, mask, dest, - src_x, src_y, mask_x, mask_y, dest_x, dest_y, width, height)) - { - return; - } - - extents = pixman_region32_extents (®ion); - - src_flags |= compute_src_extents_flags (src, extents, dest_x - src_x, dest_y - src_y); - - if (mask) - mask_flags |= compute_src_extents_flags (mask, extents, dest_x - mask_x, dest_y - mask_y); - - /* - * Check if we can replace our operator by a simpler one - * if the src or dest are opaque. The output operator should be - * mathematically equivalent to the source. - */ - op = optimize_operator (op, src_flags, mask_flags, dest_flags); - if (op == PIXMAN_OP_DST) - return; - - /* Check cache for fast paths */ - cache = PIXMAN_GET_THREAD_LOCAL (fast_path_cache); - - for (i = 0; i < N_CACHED_FAST_PATHS; ++i) - { - info = &(cache->cache[i]); - - /* Note that we check for equality here, not whether - * the cached fast path matches. This is to prevent - * us from selecting an overly general fast path - * when a more specific one would work. - */ - if (info->op == op && - info->src_format == src_format && - info->mask_format == mask_format && - info->dest_format == dest_format && - info->src_flags == src_flags && - info->mask_flags == mask_flags && - info->dest_flags == dest_flags && - info->func) - { - goto found; - } - } - - while (imp) - { - info = imp->fast_paths; - - while (info->op != PIXMAN_OP_NONE) - { - if ((info->op == op || info->op == PIXMAN_OP_any) && - /* Formats */ - ((info->src_format == src_format) || - (info->src_format == PIXMAN_any)) && - ((info->mask_format == mask_format) || - (info->mask_format == PIXMAN_any)) && - ((info->dest_format == dest_format) || - (info->dest_format == PIXMAN_any)) && - /* Flags */ - (info->src_flags & src_flags) == info->src_flags && - (info->mask_flags & mask_flags) == info->mask_flags && - (info->dest_flags & dest_flags) == info->dest_flags) - { - /* Set i to the last spot in the cache so that the - * move-to-front code below will work - */ - i = N_CACHED_FAST_PATHS - 1; - - goto found; - } - - ++info; - } - - imp = imp->delegate; - } - - /* We didn't find a compositing routine. This should not happen, but if - * it somehow does, just exit rather than crash. - */ - goto out; - -found: - walk_region_internal (imp, op, - src, mask, dest, - src_x, src_y, mask_x, mask_y, - dest_x, dest_y, - width, height, - (src_flags & FAST_PATH_SIMPLE_REPEAT), - (mask_flags & FAST_PATH_SIMPLE_REPEAT), - ®ion, info->func); - - if (i) - { - /* Make a copy of info->func, because info->func may change when - * we update the cache. - */ - pixman_composite_func_t func = info->func; - - while (i--) - cache->cache[i + 1] = cache->cache[i]; - - cache->cache[0].op = op; - cache->cache[0].src_format = src_format; - cache->cache[0].src_flags = src_flags; - cache->cache[0].mask_format = mask_format; - cache->cache[0].mask_flags = mask_flags; - cache->cache[0].dest_format = dest_format; - cache->cache[0].dest_flags = dest_flags; - cache->cache[0].func = func; - } - -out: - if (need_workaround) - { - unapply_workaround (src, src_bits, src_dx, src_dy); - unapply_workaround (mask, mask_bits, mask_dx, mask_dy); - unapply_workaround (dest, dest_bits, dest_dx, dest_dy); - } - - pixman_region32_fini (®ion); -} - -PIXMAN_EXPORT void -pixman_image_composite (pixman_op_t op, - pixman_image_t * src, - pixman_image_t * mask, - pixman_image_t * dest, - int16_t src_x, - int16_t src_y, - int16_t mask_x, - int16_t mask_y, - int16_t dest_x, - int16_t dest_y, - uint16_t width, - uint16_t height) -{ - pixman_image_composite32 (op, src, mask, dest, src_x, src_y, - mask_x, mask_y, dest_x, dest_y, width, height); -} - -/* - * Work around GCC bug causing crashes in Mozilla with SSE2 - * - * When using -msse, gcc generates movdqa instructions assuming that - * the stack is 16 byte aligned. Unfortunately some applications, such - * as Mozilla and Mono, end up aligning the stack to 4 bytes, which - * causes the movdqa instructions to fail. - * - * The __force_align_arg_pointer__ makes gcc generate a prologue that - * realigns the stack pointer to 16 bytes. - * - * On x86-64 this is not necessary because the standard ABI already - * calls for a 16 byte aligned stack. - * - * See https://bugs.freedesktop.org/show_bug.cgi?id=15693 - */ -#if defined (USE_SSE2) && defined(__GNUC__) && !defined(__x86_64__) && !defined(__amd64__) -__attribute__((__force_align_arg_pointer__)) -#endif -PIXMAN_EXPORT void -pixman_image_composite32 (pixman_op_t op, - pixman_image_t * src, - pixman_image_t * mask, - pixman_image_t * dest, - int32_t src_x, - int32_t src_y, - int32_t mask_x, - int32_t mask_y, - int32_t dest_x, - int32_t dest_y, - int32_t width, - int32_t height) -{ - _pixman_image_validate (src); - if (mask) - _pixman_image_validate (mask); - _pixman_image_validate (dest); - - if (!imp) - imp = _pixman_choose_implementation (); - - do_composite (imp, op, - src, mask, dest, - src_x, src_y, - mask_x, mask_y, - dest_x, dest_y, - width, height); -} - -PIXMAN_EXPORT pixman_bool_t -pixman_blt (uint32_t *src_bits, - uint32_t *dst_bits, - int src_stride, - int dst_stride, - int src_bpp, - int dst_bpp, - int src_x, - int src_y, - int dst_x, - int dst_y, - int width, - int height) -{ - if (!imp) - imp = _pixman_choose_implementation (); - - return _pixman_implementation_blt (imp, src_bits, dst_bits, src_stride, dst_stride, - src_bpp, dst_bpp, - src_x, src_y, - dst_x, dst_y, - width, height); -} - -PIXMAN_EXPORT pixman_bool_t -pixman_fill (uint32_t *bits, - int stride, - int bpp, - int x, - int y, - int width, - int height, - uint32_t xor) -{ - if (!imp) - imp = _pixman_choose_implementation (); - - return _pixman_implementation_fill (imp, bits, stride, bpp, x, y, width, height, xor); -} - -static uint32_t -color_to_uint32 (const pixman_color_t *color) -{ - return - (color->alpha >> 8 << 24) | - (color->red >> 8 << 16) | - (color->green & 0xff00) | - (color->blue >> 8); -} - -static pixman_bool_t -color_to_pixel (pixman_color_t * color, - uint32_t * pixel, - pixman_format_code_t format) -{ - uint32_t c = color_to_uint32 (color); - - if (!(format == PIXMAN_a8r8g8b8 || - format == PIXMAN_x8r8g8b8 || - format == PIXMAN_a8b8g8r8 || - format == PIXMAN_x8b8g8r8 || - format == PIXMAN_b8g8r8a8 || - format == PIXMAN_b8g8r8x8 || - format == PIXMAN_r5g6b5 || - format == PIXMAN_b5g6r5 || - format == PIXMAN_a8)) - { - return FALSE; - } - - if (PIXMAN_FORMAT_TYPE (format) == PIXMAN_TYPE_ABGR) - { - c = ((c & 0xff000000) >> 0) | - ((c & 0x00ff0000) >> 16) | - ((c & 0x0000ff00) >> 0) | - ((c & 0x000000ff) << 16); - } - if (PIXMAN_FORMAT_TYPE (format) == PIXMAN_TYPE_BGRA) - { - c = ((c & 0xff000000) >> 24) | - ((c & 0x00ff0000) >> 8) | - ((c & 0x0000ff00) << 8) | - ((c & 0x000000ff) << 24); - } - - if (format == PIXMAN_a8) - c = c >> 24; - else if (format == PIXMAN_r5g6b5 || - format == PIXMAN_b5g6r5) - c = CONVERT_8888_TO_0565 (c); - -#if 0 - printf ("color: %x %x %x %x\n", color->alpha, color->red, color->green, color->blue); - printf ("pixel: %x\n", c); -#endif - - *pixel = c; - return TRUE; -} - -PIXMAN_EXPORT pixman_bool_t -pixman_image_fill_rectangles (pixman_op_t op, - pixman_image_t * dest, - pixman_color_t * color, - int n_rects, - const pixman_rectangle16_t *rects) -{ - pixman_box32_t stack_boxes[6]; - pixman_box32_t *boxes; - pixman_bool_t result; - int i; - - if (n_rects > 6) - { - boxes = pixman_malloc_ab (sizeof (pixman_box32_t), n_rects); - if (boxes == NULL) - return FALSE; - } - else - { - boxes = stack_boxes; - } - - for (i = 0; i < n_rects; ++i) - { - boxes[i].x1 = rects[i].x; - boxes[i].y1 = rects[i].y; - boxes[i].x2 = boxes[i].x1 + rects[i].width; - boxes[i].y2 = boxes[i].y1 + rects[i].height; - } - - result = pixman_image_fill_boxes (op, dest, color, n_rects, boxes); - - if (boxes != stack_boxes) - free (boxes); - - return result; -} - -PIXMAN_EXPORT pixman_bool_t -pixman_image_fill_boxes (pixman_op_t op, - pixman_image_t * dest, - pixman_color_t * color, - int n_boxes, - const pixman_box32_t *boxes) -{ - pixman_image_t *solid; - pixman_color_t c; - int i; - - _pixman_image_validate (dest); - - if (color->alpha == 0xffff) - { - if (op == PIXMAN_OP_OVER) - op = PIXMAN_OP_SRC; - } - - if (op == PIXMAN_OP_CLEAR) - { - c.red = 0; - c.green = 0; - c.blue = 0; - c.alpha = 0; - - color = &c; - - op = PIXMAN_OP_SRC; - } - - if (op == PIXMAN_OP_SRC) - { - uint32_t pixel; - - if (color_to_pixel (color, &pixel, dest->bits.format)) - { - pixman_region32_t fill_region; - int n_rects, j; - pixman_box32_t *rects; - - if (!pixman_region32_init_rects (&fill_region, boxes, n_boxes)) - return FALSE; - - if (dest->common.have_clip_region) - { - if (!pixman_region32_intersect (&fill_region, - &fill_region, - &dest->common.clip_region)) - return FALSE; - } - - rects = pixman_region32_rectangles (&fill_region, &n_rects); - for (j = 0; j < n_rects; ++j) - { - const pixman_box32_t *rect = &(rects[j]); - pixman_fill (dest->bits.bits, dest->bits.rowstride, PIXMAN_FORMAT_BPP (dest->bits.format), - rect->x1, rect->y1, rect->x2 - rect->x1, rect->y2 - rect->y1, - pixel); - } - - pixman_region32_fini (&fill_region); - return TRUE; - } - } - - solid = pixman_image_create_solid_fill (color); - if (!solid) - return FALSE; - - for (i = 0; i < n_boxes; ++i) - { - const pixman_box32_t *box = &(boxes[i]); - - pixman_image_composite32 (op, solid, NULL, dest, - 0, 0, 0, 0, - box->x1, box->y1, - box->x2 - box->x1, box->y2 - box->y1); - } - - pixman_image_unref (solid); - - return TRUE; -} - -/** - * pixman_version: - * - * Returns the version of the pixman library encoded in a single - * integer as per %PIXMAN_VERSION_ENCODE. The encoding ensures that - * later versions compare greater than earlier versions. - * - * A run-time comparison to check that pixman's version is greater than - * or equal to version X.Y.Z could be performed as follows: - * - * <informalexample><programlisting> - * if (pixman_version() >= PIXMAN_VERSION_ENCODE(X,Y,Z)) {...} - * </programlisting></informalexample> - * - * See also pixman_version_string() as well as the compile-time - * equivalents %PIXMAN_VERSION and %PIXMAN_VERSION_STRING. - * - * Return value: the encoded version. - **/ -PIXMAN_EXPORT int -pixman_version (void) -{ - return PIXMAN_VERSION; -} - -/** - * pixman_version_string: - * - * Returns the version of the pixman library as a human-readable string - * of the form "X.Y.Z". - * - * See also pixman_version() as well as the compile-time equivalents - * %PIXMAN_VERSION_STRING and %PIXMAN_VERSION. - * - * Return value: a string containing the version. - **/ -PIXMAN_EXPORT const char* -pixman_version_string (void) -{ - return PIXMAN_VERSION_STRING; -} - -/** - * pixman_format_supported_source: - * @format: A pixman_format_code_t format - * - * Return value: whether the provided format code is a supported - * format for a pixman surface used as a source in - * rendering. - * - * Currently, all pixman_format_code_t values are supported. - **/ -PIXMAN_EXPORT pixman_bool_t -pixman_format_supported_source (pixman_format_code_t format) -{ - switch (format) - { - /* 32 bpp formats */ - case PIXMAN_a2b10g10r10: - case PIXMAN_x2b10g10r10: - case PIXMAN_a2r10g10b10: - case PIXMAN_x2r10g10b10: - case PIXMAN_a8r8g8b8: - case PIXMAN_x8r8g8b8: - case PIXMAN_a8b8g8r8: - case PIXMAN_x8b8g8r8: - case PIXMAN_b8g8r8a8: - case PIXMAN_b8g8r8x8: - case PIXMAN_r8g8b8: - case PIXMAN_b8g8r8: - case PIXMAN_r5g6b5: - case PIXMAN_b5g6r5: - /* 16 bpp formats */ - case PIXMAN_a1r5g5b5: - case PIXMAN_x1r5g5b5: - case PIXMAN_a1b5g5r5: - case PIXMAN_x1b5g5r5: - case PIXMAN_a4r4g4b4: - case PIXMAN_x4r4g4b4: - case PIXMAN_a4b4g4r4: - case PIXMAN_x4b4g4r4: - /* 8bpp formats */ - case PIXMAN_a8: - case PIXMAN_r3g3b2: - case PIXMAN_b2g3r3: - case PIXMAN_a2r2g2b2: - case PIXMAN_a2b2g2r2: - case PIXMAN_c8: - case PIXMAN_g8: - case PIXMAN_x4a4: - /* Collides with PIXMAN_c8 - case PIXMAN_x4c4: - */ - /* Collides with PIXMAN_g8 - case PIXMAN_x4g4: - */ - /* 4bpp formats */ - case PIXMAN_a4: - case PIXMAN_r1g2b1: - case PIXMAN_b1g2r1: - case PIXMAN_a1r1g1b1: - case PIXMAN_a1b1g1r1: - case PIXMAN_c4: - case PIXMAN_g4: - /* 1bpp formats */ - case PIXMAN_a1: - case PIXMAN_g1: - /* YUV formats */ - case PIXMAN_yuy2: - case PIXMAN_yv12: - return TRUE; - - default: - return FALSE; - } -} - -/** - * pixman_format_supported_destination: - * @format: A pixman_format_code_t format - * - * Return value: whether the provided format code is a supported - * format for a pixman surface used as a destination in - * rendering. - * - * Currently, all pixman_format_code_t values are supported - * except for the YUV formats. - **/ -PIXMAN_EXPORT pixman_bool_t -pixman_format_supported_destination (pixman_format_code_t format) -{ - /* YUV formats cannot be written to at the moment */ - if (format == PIXMAN_yuy2 || format == PIXMAN_yv12) - return FALSE; - - return pixman_format_supported_source (format); -} - -PIXMAN_EXPORT pixman_bool_t -pixman_compute_composite_region (pixman_region16_t * region, - pixman_image_t * src_image, - pixman_image_t * mask_image, - pixman_image_t * dst_image, - int16_t src_x, - int16_t src_y, - int16_t mask_x, - int16_t mask_y, - int16_t dest_x, - int16_t dest_y, - uint16_t width, - uint16_t height) -{ - pixman_region32_t r32; - pixman_bool_t retval; - - pixman_region32_init (&r32); - - retval = pixman_compute_composite_region32 ( - &r32, src_image, mask_image, dst_image, - src_x, src_y, mask_x, mask_y, dest_x, dest_y, - width, height); - - if (retval) - { - if (!pixman_region16_copy_from_region32 (region, &r32)) - retval = FALSE; - } - - pixman_region32_fini (&r32); - return retval; -} +/* -*- Mode: c; c-basic-offset: 4; tab-width: 8; indent-tabs-mode: t; -*- */
+/*
+ * Copyright © 2000 SuSE, Inc.
+ * Copyright © 2007 Red Hat, Inc.
+ *
+ * Permission to use, copy, modify, distribute, and sell this software and its
+ * documentation for any purpose is hereby granted without fee, provided that
+ * the above copyright notice appear in all copies and that both that
+ * copyright notice and this permission notice appear in supporting
+ * documentation, and that the name of SuSE not be used in advertising or
+ * publicity pertaining to distribution of the software without specific,
+ * written prior permission. SuSE makes no representations about the
+ * suitability of this software for any purpose. It is provided "as is"
+ * without express or implied warranty.
+ *
+ * SuSE DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE, INCLUDING ALL
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO EVENT SHALL SuSE
+ * BE LIABLE FOR ANY SPECIAL, INDIRECT OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION
+ * OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN
+ * CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ *
+ * Author: Keith Packard, SuSE, Inc.
+ */
+
+#ifdef HAVE_CONFIG_H
+#include <config.h>
+#endif
+#include "pixman-private.h"
+
+#include <stdlib.h>
+
+static force_inline pixman_implementation_t *
+get_implementation (void)
+{
+ static pixman_implementation_t *global_implementation;
+
+ if (!global_implementation)
+ global_implementation = _pixman_choose_implementation ();
+
+ return global_implementation;
+}
+
+typedef struct operator_info_t operator_info_t;
+
+struct operator_info_t
+{
+ uint8_t opaque_info[4];
+};
+
+#define PACK(neither, src, dest, both) \
+ {{ (uint8_t)PIXMAN_OP_ ## neither, \
+ (uint8_t)PIXMAN_OP_ ## src, \
+ (uint8_t)PIXMAN_OP_ ## dest, \
+ (uint8_t)PIXMAN_OP_ ## both }}
+
+static const operator_info_t operator_table[] =
+{
+ /* Neither Opaque Src Opaque Dst Opaque Both Opaque */
+ PACK (CLEAR, CLEAR, CLEAR, CLEAR),
+ PACK (SRC, SRC, SRC, SRC),
+ PACK (DST, DST, DST, DST),
+ PACK (OVER, SRC, OVER, SRC),
+ PACK (OVER_REVERSE, OVER_REVERSE, DST, DST),
+ PACK (IN, IN, SRC, SRC),
+ PACK (IN_REVERSE, DST, IN_REVERSE, DST),
+ PACK (OUT, OUT, CLEAR, CLEAR),
+ PACK (OUT_REVERSE, CLEAR, OUT_REVERSE, CLEAR),
+ PACK (ATOP, IN, OVER, SRC),
+ PACK (ATOP_REVERSE, OVER_REVERSE, IN_REVERSE, DST),
+ PACK (XOR, OUT, OUT_REVERSE, CLEAR),
+ PACK (ADD, ADD, ADD, ADD),
+ PACK (SATURATE, OVER_REVERSE, DST, DST),
+
+ {{ 0 /* 0x0e */ }},
+ {{ 0 /* 0x0f */ }},
+
+ PACK (CLEAR, CLEAR, CLEAR, CLEAR),
+ PACK (SRC, SRC, SRC, SRC),
+ PACK (DST, DST, DST, DST),
+ PACK (DISJOINT_OVER, DISJOINT_OVER, DISJOINT_OVER, DISJOINT_OVER),
+ PACK (DISJOINT_OVER_REVERSE, DISJOINT_OVER_REVERSE, DISJOINT_OVER_REVERSE, DISJOINT_OVER_REVERSE),
+ PACK (DISJOINT_IN, DISJOINT_IN, DISJOINT_IN, DISJOINT_IN),
+ PACK (DISJOINT_IN_REVERSE, DISJOINT_IN_REVERSE, DISJOINT_IN_REVERSE, DISJOINT_IN_REVERSE),
+ PACK (DISJOINT_OUT, DISJOINT_OUT, DISJOINT_OUT, DISJOINT_OUT),
+ PACK (DISJOINT_OUT_REVERSE, DISJOINT_OUT_REVERSE, DISJOINT_OUT_REVERSE, DISJOINT_OUT_REVERSE),
+ PACK (DISJOINT_ATOP, DISJOINT_ATOP, DISJOINT_ATOP, DISJOINT_ATOP),
+ PACK (DISJOINT_ATOP_REVERSE, DISJOINT_ATOP_REVERSE, DISJOINT_ATOP_REVERSE, DISJOINT_ATOP_REVERSE),
+ PACK (DISJOINT_XOR, DISJOINT_XOR, DISJOINT_XOR, DISJOINT_XOR),
+
+ {{ 0 /* 0x1c */ }},
+ {{ 0 /* 0x1d */ }},
+ {{ 0 /* 0x1e */ }},
+ {{ 0 /* 0x1f */ }},
+
+ PACK (CLEAR, CLEAR, CLEAR, CLEAR),
+ PACK (SRC, SRC, SRC, SRC),
+ PACK (DST, DST, DST, DST),
+ PACK (CONJOINT_OVER, CONJOINT_OVER, CONJOINT_OVER, CONJOINT_OVER),
+ PACK (CONJOINT_OVER_REVERSE, CONJOINT_OVER_REVERSE, CONJOINT_OVER_REVERSE, CONJOINT_OVER_REVERSE),
+ PACK (CONJOINT_IN, CONJOINT_IN, CONJOINT_IN, CONJOINT_IN),
+ PACK (CONJOINT_IN_REVERSE, CONJOINT_IN_REVERSE, CONJOINT_IN_REVERSE, CONJOINT_IN_REVERSE),
+ PACK (CONJOINT_OUT, CONJOINT_OUT, CONJOINT_OUT, CONJOINT_OUT),
+ PACK (CONJOINT_OUT_REVERSE, CONJOINT_OUT_REVERSE, CONJOINT_OUT_REVERSE, CONJOINT_OUT_REVERSE),
+ PACK (CONJOINT_ATOP, CONJOINT_ATOP, CONJOINT_ATOP, CONJOINT_ATOP),
+ PACK (CONJOINT_ATOP_REVERSE, CONJOINT_ATOP_REVERSE, CONJOINT_ATOP_REVERSE, CONJOINT_ATOP_REVERSE),
+ PACK (CONJOINT_XOR, CONJOINT_XOR, CONJOINT_XOR, CONJOINT_XOR),
+
+ {{ 0 /* 0x2c */ }},
+ {{ 0 /* 0x2d */ }},
+ {{ 0 /* 0x2e */ }},
+ {{ 0 /* 0x2f */ }},
+
+ PACK (MULTIPLY, MULTIPLY, MULTIPLY, MULTIPLY),
+ PACK (SCREEN, SCREEN, SCREEN, SCREEN),
+ PACK (OVERLAY, OVERLAY, OVERLAY, OVERLAY),
+ PACK (DARKEN, DARKEN, DARKEN, DARKEN),
+ PACK (LIGHTEN, LIGHTEN, LIGHTEN, LIGHTEN),
+ PACK (COLOR_DODGE, COLOR_DODGE, COLOR_DODGE, COLOR_DODGE),
+ PACK (COLOR_BURN, COLOR_BURN, COLOR_BURN, COLOR_BURN),
+ PACK (HARD_LIGHT, HARD_LIGHT, HARD_LIGHT, HARD_LIGHT),
+ PACK (SOFT_LIGHT, SOFT_LIGHT, SOFT_LIGHT, SOFT_LIGHT),
+ PACK (DIFFERENCE, DIFFERENCE, DIFFERENCE, DIFFERENCE),
+ PACK (EXCLUSION, EXCLUSION, EXCLUSION, EXCLUSION),
+ PACK (HSL_HUE, HSL_HUE, HSL_HUE, HSL_HUE),
+ PACK (HSL_SATURATION, HSL_SATURATION, HSL_SATURATION, HSL_SATURATION),
+ PACK (HSL_COLOR, HSL_COLOR, HSL_COLOR, HSL_COLOR),
+ PACK (HSL_LUMINOSITY, HSL_LUMINOSITY, HSL_LUMINOSITY, HSL_LUMINOSITY),
+};
+
+/*
+ * Optimize the current operator based on opacity of source or destination
+ * The output operator should be mathematically equivalent to the source.
+ */
+static pixman_op_t
+optimize_operator (pixman_op_t op,
+ uint32_t src_flags,
+ uint32_t mask_flags,
+ uint32_t dst_flags)
+{
+ pixman_bool_t is_source_opaque, is_dest_opaque;
+ int opaqueness;
+
+ is_source_opaque = ((src_flags & mask_flags) & FAST_PATH_IS_OPAQUE) != 0;
+ is_dest_opaque = (dst_flags & FAST_PATH_IS_OPAQUE) != 0;
+
+ opaqueness = ((is_dest_opaque << 1) | is_source_opaque);
+
+ return operator_table[op].opaque_info[opaqueness];
+}
+
+static void
+apply_workaround (pixman_image_t *image,
+ int32_t * x,
+ int32_t * y,
+ uint32_t ** save_bits,
+ int * save_dx,
+ int * save_dy)
+{
+ if (image && (image->common.flags & FAST_PATH_NEEDS_WORKAROUND))
+ {
+ /* Some X servers generate images that point to the
+ * wrong place in memory, but then set the clip region
+ * to point to the right place. Because of an old bug
+ * in pixman, this would actually work.
+ *
+ * Here we try and undo the damage
+ */
+ int bpp = PIXMAN_FORMAT_BPP (image->bits.format) / 8;
+ pixman_box32_t *extents;
+ uint8_t *t;
+ int dx, dy;
+
+ extents = pixman_region32_extents (&(image->common.clip_region));
+ dx = extents->x1;
+ dy = extents->y1;
+
+ *save_bits = image->bits.bits;
+
+ *x -= dx;
+ *y -= dy;
+ pixman_region32_translate (&(image->common.clip_region), -dx, -dy);
+
+ t = (uint8_t *)image->bits.bits;
+ t += dy * image->bits.rowstride * 4 + dx * bpp;
+ image->bits.bits = (uint32_t *)t;
+
+ *save_dx = dx;
+ *save_dy = dy;
+ }
+}
+
+static void
+unapply_workaround (pixman_image_t *image, uint32_t *bits, int dx, int dy)
+{
+ if (image && (image->common.flags & FAST_PATH_NEEDS_WORKAROUND))
+ {
+ image->bits.bits = bits;
+ pixman_region32_translate (&image->common.clip_region, dx, dy);
+ }
+}
+
+/*
+ * Computing composite region
+ */
+static inline pixman_bool_t
+clip_general_image (pixman_region32_t * region,
+ pixman_region32_t * clip,
+ int dx,
+ int dy)
+{
+ if (pixman_region32_n_rects (region) == 1 &&
+ pixman_region32_n_rects (clip) == 1)
+ {
+ pixman_box32_t * rbox = pixman_region32_rectangles (region, NULL);
+ pixman_box32_t * cbox = pixman_region32_rectangles (clip, NULL);
+ int v;
+
+ if (rbox->x1 < (v = cbox->x1 + dx))
+ rbox->x1 = v;
+ if (rbox->x2 > (v = cbox->x2 + dx))
+ rbox->x2 = v;
+ if (rbox->y1 < (v = cbox->y1 + dy))
+ rbox->y1 = v;
+ if (rbox->y2 > (v = cbox->y2 + dy))
+ rbox->y2 = v;
+ if (rbox->x1 >= rbox->x2 || rbox->y1 >= rbox->y2)
+ {
+ pixman_region32_init (region);
+ return FALSE;
+ }
+ }
+ else if (!pixman_region32_not_empty (clip))
+ {
+ return FALSE;
+ }
+ else
+ {
+ if (dx || dy)
+ pixman_region32_translate (region, -dx, -dy);
+
+ if (!pixman_region32_intersect (region, region, clip))
+ return FALSE;
+
+ if (dx || dy)
+ pixman_region32_translate (region, dx, dy);
+ }
+
+ return pixman_region32_not_empty (region);
+}
+
+static inline pixman_bool_t
+clip_source_image (pixman_region32_t * region,
+ pixman_image_t * image,
+ int dx,
+ int dy)
+{
+ /* Source clips are ignored, unless they are explicitly turned on
+ * and the clip in question was set by an X client. (Because if
+ * the clip was not set by a client, then it is a hierarchy
+ * clip and those should always be ignored for sources).
+ */
+ if (!image->common.clip_sources || !image->common.client_clip)
+ return TRUE;
+
+ return clip_general_image (region,
+ &image->common.clip_region,
+ dx, dy);
+}
+
+/*
+ * returns FALSE if the final region is empty. Indistinguishable from
+ * an allocation failure, but rendering ignores those anyways.
+ */
+static pixman_bool_t
+pixman_compute_composite_region32 (pixman_region32_t * region,
+ pixman_image_t * src_image,
+ pixman_image_t * mask_image,
+ pixman_image_t * dst_image,
+ int32_t src_x,
+ int32_t src_y,
+ int32_t mask_x,
+ int32_t mask_y,
+ int32_t dest_x,
+ int32_t dest_y,
+ int32_t width,
+ int32_t height)
+{
+ region->extents.x1 = dest_x;
+ region->extents.x2 = dest_x + width;
+ region->extents.y1 = dest_y;
+ region->extents.y2 = dest_y + height;
+
+ region->extents.x1 = MAX (region->extents.x1, 0);
+ region->extents.y1 = MAX (region->extents.y1, 0);
+ region->extents.x2 = MIN (region->extents.x2, dst_image->bits.width);
+ region->extents.y2 = MIN (region->extents.y2, dst_image->bits.height);
+
+ region->data = 0;
+
+ /* Check for empty operation */
+ if (region->extents.x1 >= region->extents.x2 ||
+ region->extents.y1 >= region->extents.y2)
+ {
+ pixman_region32_init (region);
+ return FALSE;
+ }
+
+ if (dst_image->common.have_clip_region)
+ {
+ if (!clip_general_image (region, &dst_image->common.clip_region, 0, 0))
+ {
+ pixman_region32_fini (region);
+ return FALSE;
+ }
+ }
+
+ if (dst_image->common.alpha_map && dst_image->common.alpha_map->common.have_clip_region)
+ {
+ if (!clip_general_image (region, &dst_image->common.alpha_map->common.clip_region,
+ -dst_image->common.alpha_origin_x,
+ -dst_image->common.alpha_origin_y))
+ {
+ pixman_region32_fini (region);
+ return FALSE;
+ }
+ }
+
+ /* clip against src */
+ if (src_image->common.have_clip_region)
+ {
+ if (!clip_source_image (region, src_image, dest_x - src_x, dest_y - src_y))
+ {
+ pixman_region32_fini (region);
+ return FALSE;
+ }
+ }
+ if (src_image->common.alpha_map && src_image->common.alpha_map->common.have_clip_region)
+ {
+ if (!clip_source_image (region, (pixman_image_t *)src_image->common.alpha_map,
+ dest_x - (src_x - src_image->common.alpha_origin_x),
+ dest_y - (src_y - src_image->common.alpha_origin_y)))
+ {
+ pixman_region32_fini (region);
+ return FALSE;
+ }
+ }
+ /* clip against mask */
+ if (mask_image && mask_image->common.have_clip_region)
+ {
+ if (!clip_source_image (region, mask_image, dest_x - mask_x, dest_y - mask_y))
+ {
+ pixman_region32_fini (region);
+ return FALSE;
+ }
+ if (mask_image->common.alpha_map && mask_image->common.alpha_map->common.have_clip_region)
+ {
+ if (!clip_source_image (region, (pixman_image_t *)mask_image->common.alpha_map,
+ dest_x - (mask_x - mask_image->common.alpha_origin_x),
+ dest_y - (mask_y - mask_image->common.alpha_origin_y)))
+ {
+ pixman_region32_fini (region);
+ return FALSE;
+ }
+ }
+ }
+
+ return TRUE;
+}
+
+static void
+walk_region_internal (pixman_implementation_t *imp,
+ pixman_op_t op,
+ pixman_image_t * src_image,
+ pixman_image_t * mask_image,
+ pixman_image_t * dst_image,
+ int32_t src_x,
+ int32_t src_y,
+ int32_t mask_x,
+ int32_t mask_y,
+ int32_t dest_x,
+ int32_t dest_y,
+ int32_t width,
+ int32_t height,
+ pixman_bool_t src_repeat,
+ pixman_bool_t mask_repeat,
+ pixman_region32_t * region,
+ pixman_composite_func_t composite_rect)
+{
+ int w, h, w_this, h_this;
+ int x_msk, y_msk, x_src, y_src, x_dst, y_dst;
+ int src_dy = src_y - dest_y;
+ int src_dx = src_x - dest_x;
+ int mask_dy = mask_y - dest_y;
+ int mask_dx = mask_x - dest_x;
+ const pixman_box32_t *pbox;
+ int n;
+
+ pbox = pixman_region32_rectangles (region, &n);
+
+ /* Fast path for non-repeating sources */
+ if (!src_repeat && !mask_repeat)
+ {
+ while (n--)
+ {
+ (*composite_rect) (imp, op,
+ src_image, mask_image, dst_image,
+ pbox->x1 + src_dx,
+ pbox->y1 + src_dy,
+ pbox->x1 + mask_dx,
+ pbox->y1 + mask_dy,
+ pbox->x1,
+ pbox->y1,
+ pbox->x2 - pbox->x1,
+ pbox->y2 - pbox->y1);
+
+ pbox++;
+ }
+
+ return;
+ }
+
+ while (n--)
+ {
+ h = pbox->y2 - pbox->y1;
+ y_src = pbox->y1 + src_dy;
+ y_msk = pbox->y1 + mask_dy;
+ y_dst = pbox->y1;
+
+ while (h)
+ {
+ h_this = h;
+ w = pbox->x2 - pbox->x1;
+ x_src = pbox->x1 + src_dx;
+ x_msk = pbox->x1 + mask_dx;
+ x_dst = pbox->x1;
+
+ if (mask_repeat)
+ {
+ y_msk = MOD (y_msk, mask_image->bits.height);
+ if (h_this > mask_image->bits.height - y_msk)
+ h_this = mask_image->bits.height - y_msk;
+ }
+
+ if (src_repeat)
+ {
+ y_src = MOD (y_src, src_image->bits.height);
+ if (h_this > src_image->bits.height - y_src)
+ h_this = src_image->bits.height - y_src;
+ }
+
+ while (w)
+ {
+ w_this = w;
+
+ if (mask_repeat)
+ {
+ x_msk = MOD (x_msk, mask_image->bits.width);
+ if (w_this > mask_image->bits.width - x_msk)
+ w_this = mask_image->bits.width - x_msk;
+ }
+
+ if (src_repeat)
+ {
+ x_src = MOD (x_src, src_image->bits.width);
+ if (w_this > src_image->bits.width - x_src)
+ w_this = src_image->bits.width - x_src;
+ }
+
+ (*composite_rect) (imp, op,
+ src_image, mask_image, dst_image,
+ x_src, y_src, x_msk, y_msk, x_dst, y_dst,
+ w_this, h_this);
+ w -= w_this;
+
+ x_src += w_this;
+ x_msk += w_this;
+ x_dst += w_this;
+ }
+
+ h -= h_this;
+ y_src += h_this;
+ y_msk += h_this;
+ y_dst += h_this;
+ }
+
+ pbox++;
+ }
+}
+
+#define IS_16BIT(x) (((x) >= INT16_MIN) && ((x) <= INT16_MAX))
+
+static force_inline uint32_t
+compute_src_extents_flags (pixman_image_t *image,
+ pixman_box32_t *extents,
+ int x,
+ int y)
+{
+ pixman_box16_t extents16;
+ uint32_t flags;
+
+ flags = FAST_PATH_COVERS_CLIP;
+
+ if (image->common.type != BITS)
+ return flags;
+
+ if (image->common.repeat == PIXMAN_REPEAT_NONE &&
+ (x > extents->x1 || y > extents->y1 ||
+ x + image->bits.width < extents->x2 ||
+ y + image->bits.height < extents->y2))
+ {
+ flags &= ~FAST_PATH_COVERS_CLIP;
+ }
+
+ if (IS_16BIT (extents->x1 - x) &&
+ IS_16BIT (extents->y1 - y) &&
+ IS_16BIT (extents->x2 - x) &&
+ IS_16BIT (extents->y2 - y))
+ {
+ extents16.x1 = extents->x1 - x;
+ extents16.y1 = extents->y1 - y;
+ extents16.x2 = extents->x2 - x;
+ extents16.y2 = extents->y2 - y;
+
+ if (!image->common.transform ||
+ pixman_transform_bounds (image->common.transform, &extents16))
+ {
+ if (extents16.x1 >= 0 && extents16.y1 >= 0 &&
+ extents16.x2 <= image->bits.width &&
+ extents16.y2 <= image->bits.height)
+ {
+ flags |= FAST_PATH_SAMPLES_COVER_CLIP;
+ }
+ }
+ }
+
+ if (IS_16BIT (extents->x1 - x - 1) &&
+ IS_16BIT (extents->y1 - y - 1) &&
+ IS_16BIT (extents->x2 - x + 1) &&
+ IS_16BIT (extents->y2 - y + 1))
+ {
+ extents16.x1 = extents->x1 - x - 1;
+ extents16.y1 = extents->y1 - y - 1;
+ extents16.x2 = extents->x2 - x + 1;
+ extents16.y2 = extents->y2 - y + 1;
+
+ if (/* src space expanded by one in dest space fits in 16 bit */
+ (!image->common.transform ||
+ pixman_transform_bounds (image->common.transform, &extents16)) &&
+ /* And src image size can be used as 16.16 fixed point */
+ image->bits.width < 0x7fff &&
+ image->bits.height < 0x7fff)
+ {
+ /* Then we're "16bit safe" */
+ flags |= FAST_PATH_16BIT_SAFE;
+ }
+ }
+
+ return flags;
+}
+
+#define N_CACHED_FAST_PATHS 8
+
+typedef struct
+{
+ struct
+ {
+ pixman_implementation_t * imp;
+ pixman_fast_path_t fast_path;
+ } cache [N_CACHED_FAST_PATHS];
+} cache_t;
+
+PIXMAN_DEFINE_THREAD_LOCAL (cache_t, fast_path_cache);
+
+static force_inline void
+lookup_composite_function (pixman_op_t op,
+ pixman_format_code_t src_format,
+ uint32_t src_flags,
+ pixman_format_code_t mask_format,
+ uint32_t mask_flags,
+ pixman_format_code_t dest_format,
+ uint32_t dest_flags,
+ pixman_implementation_t **out_imp,
+ pixman_composite_func_t *out_func)
+{
+ pixman_implementation_t *imp;
+ cache_t *cache;
+ int i;
+
+ /* Check cache for fast paths */
+ cache = PIXMAN_GET_THREAD_LOCAL (fast_path_cache);
+
+ for (i = 0; i < N_CACHED_FAST_PATHS; ++i)
+ {
+ const pixman_fast_path_t *info = &(cache->cache[i].fast_path);
+
+ /* Note that we check for equality here, not whether
+ * the cached fast path matches. This is to prevent
+ * us from selecting an overly general fast path
+ * when a more specific one would work.
+ */
+ if (info->op == op &&
+ info->src_format == src_format &&
+ info->mask_format == mask_format &&
+ info->dest_format == dest_format &&
+ info->src_flags == src_flags &&
+ info->mask_flags == mask_flags &&
+ info->dest_flags == dest_flags &&
+ info->func)
+ {
+ *out_imp = cache->cache[i].imp;
+ *out_func = cache->cache[i].fast_path.func;
+
+ goto update_cache;
+ }
+ }
+
+ for (imp = get_implementation (); imp != NULL; imp = imp->delegate)
+ {
+ const pixman_fast_path_t *info = imp->fast_paths;
+
+ while (info->op != PIXMAN_OP_NONE)
+ {
+ if ((info->op == op || info->op == PIXMAN_OP_any) &&
+ /* Formats */
+ ((info->src_format == src_format) ||
+ (info->src_format == PIXMAN_any)) &&
+ ((info->mask_format == mask_format) ||
+ (info->mask_format == PIXMAN_any)) &&
+ ((info->dest_format == dest_format) ||
+ (info->dest_format == PIXMAN_any)) &&
+ /* Flags */
+ (info->src_flags & src_flags) == info->src_flags &&
+ (info->mask_flags & mask_flags) == info->mask_flags &&
+ (info->dest_flags & dest_flags) == info->dest_flags)
+ {
+ *out_imp = imp;
+ *out_func = info->func;
+
+ /* Set i to the last spot in the cache so that the
+ * move-to-front code below will work
+ */
+ i = N_CACHED_FAST_PATHS - 1;
+
+ goto update_cache;
+ }
+
+ ++info;
+ }
+ }
+ return;
+
+update_cache:
+ if (i)
+ {
+ while (i--)
+ cache->cache[i + 1] = cache->cache[i];
+
+ cache->cache[0].imp = *out_imp;
+ cache->cache[0].fast_path.op = op;
+ cache->cache[0].fast_path.src_format = src_format;
+ cache->cache[0].fast_path.src_flags = src_flags;
+ cache->cache[0].fast_path.mask_format = mask_format;
+ cache->cache[0].fast_path.mask_flags = mask_flags;
+ cache->cache[0].fast_path.dest_format = dest_format;
+ cache->cache[0].fast_path.dest_flags = dest_flags;
+ cache->cache[0].fast_path.func = *out_func;
+ }
+}
+
+
+static void
+do_composite (pixman_op_t op,
+ pixman_image_t *src,
+ pixman_image_t *mask,
+ pixman_image_t *dest,
+ int src_x,
+ int src_y,
+ int mask_x,
+ int mask_y,
+ int dest_x,
+ int dest_y,
+ int width,
+ int height)
+{
+ pixman_format_code_t src_format, mask_format, dest_format;
+ uint32_t src_flags, mask_flags, dest_flags;
+ pixman_region32_t region;
+ pixman_box32_t *extents;
+ uint32_t *src_bits;
+ int src_dx, src_dy;
+ uint32_t *mask_bits;
+ int mask_dx, mask_dy;
+ uint32_t *dest_bits;
+ int dest_dx, dest_dy;
+ pixman_bool_t need_workaround;
+ pixman_implementation_t *imp;
+ pixman_composite_func_t func;
+
+ src_format = src->common.extended_format_code;
+ src_flags = src->common.flags;
+
+ if (mask)
+ {
+ mask_format = mask->common.extended_format_code;
+ mask_flags = mask->common.flags;
+ }
+ else
+ {
+ mask_format = PIXMAN_null;
+ mask_flags = FAST_PATH_IS_OPAQUE;
+ }
+
+ dest_format = dest->common.extended_format_code;
+ dest_flags = dest->common.flags;
+
+ /* Check for pixbufs */
+ if ((mask_format == PIXMAN_a8r8g8b8 || mask_format == PIXMAN_a8b8g8r8) &&
+ (src->type == BITS && src->bits.bits == mask->bits.bits) &&
+ (src->common.repeat == mask->common.repeat) &&
+ (src_x == mask_x && src_y == mask_y))
+ {
+ if (src_format == PIXMAN_x8b8g8r8)
+ src_format = mask_format = PIXMAN_pixbuf;
+ else if (src_format == PIXMAN_x8r8g8b8)
+ src_format = mask_format = PIXMAN_rpixbuf;
+ }
+
+ /* Check for workaround */
+ need_workaround = (src_flags | mask_flags | dest_flags) & FAST_PATH_NEEDS_WORKAROUND;
+
+ if (need_workaround)
+ {
+ apply_workaround (src, &src_x, &src_y, &src_bits, &src_dx, &src_dy);
+ apply_workaround (mask, &mask_x, &mask_y, &mask_bits, &mask_dx, &mask_dy);
+ apply_workaround (dest, &dest_x, &dest_y, &dest_bits, &dest_dx, &dest_dy);
+ }
+
+ pixman_region32_init (®ion);
+
+ if (!pixman_compute_composite_region32 (
+ ®ion, src, mask, dest,
+ src_x, src_y, mask_x, mask_y, dest_x, dest_y, width, height))
+ {
+ goto out;
+ }
+
+ extents = pixman_region32_extents (®ion);
+
+ src_flags |= compute_src_extents_flags (src, extents, dest_x - src_x, dest_y - src_y);
+
+ if (mask)
+ mask_flags |= compute_src_extents_flags (mask, extents, dest_x - mask_x, dest_y - mask_y);
+
+ /*
+ * Check if we can replace our operator by a simpler one
+ * if the src or dest are opaque. The output operator should be
+ * mathematically equivalent to the source.
+ */
+ op = optimize_operator (op, src_flags, mask_flags, dest_flags);
+ if (op == PIXMAN_OP_DST)
+ goto out;
+
+ lookup_composite_function (op,
+ src_format, src_flags,
+ mask_format, mask_flags,
+ dest_format, dest_flags,
+ &imp, &func);
+
+ walk_region_internal (imp, op,
+ src, mask, dest,
+ src_x, src_y, mask_x, mask_y,
+ dest_x, dest_y,
+ width, height,
+ (src_flags & FAST_PATH_SIMPLE_REPEAT),
+ (mask_flags & FAST_PATH_SIMPLE_REPEAT),
+ ®ion, func);
+
+out:
+ if (need_workaround)
+ {
+ unapply_workaround (src, src_bits, src_dx, src_dy);
+ unapply_workaround (mask, mask_bits, mask_dx, mask_dy);
+ unapply_workaround (dest, dest_bits, dest_dx, dest_dy);
+ }
+
+ pixman_region32_fini (®ion);
+}
+
+PIXMAN_EXPORT void
+pixman_image_composite (pixman_op_t op,
+ pixman_image_t * src,
+ pixman_image_t * mask,
+ pixman_image_t * dest,
+ int16_t src_x,
+ int16_t src_y,
+ int16_t mask_x,
+ int16_t mask_y,
+ int16_t dest_x,
+ int16_t dest_y,
+ uint16_t width,
+ uint16_t height)
+{
+ pixman_image_composite32 (op, src, mask, dest, src_x, src_y,
+ mask_x, mask_y, dest_x, dest_y, width, height);
+}
+
+/*
+ * Work around GCC bug causing crashes in Mozilla with SSE2
+ *
+ * When using -msse, gcc generates movdqa instructions assuming that
+ * the stack is 16 byte aligned. Unfortunately some applications, such
+ * as Mozilla and Mono, end up aligning the stack to 4 bytes, which
+ * causes the movdqa instructions to fail.
+ *
+ * The __force_align_arg_pointer__ makes gcc generate a prologue that
+ * realigns the stack pointer to 16 bytes.
+ *
+ * On x86-64 this is not necessary because the standard ABI already
+ * calls for a 16 byte aligned stack.
+ *
+ * See https://bugs.freedesktop.org/show_bug.cgi?id=15693
+ */
+#if defined (USE_SSE2) && defined(__GNUC__) && !defined(__x86_64__) && !defined(__amd64__)
+__attribute__((__force_align_arg_pointer__))
+#endif
+PIXMAN_EXPORT void
+pixman_image_composite32 (pixman_op_t op,
+ pixman_image_t * src,
+ pixman_image_t * mask,
+ pixman_image_t * dest,
+ int32_t src_x,
+ int32_t src_y,
+ int32_t mask_x,
+ int32_t mask_y,
+ int32_t dest_x,
+ int32_t dest_y,
+ int32_t width,
+ int32_t height)
+{
+ _pixman_image_validate (src);
+ if (mask)
+ _pixman_image_validate (mask);
+ _pixman_image_validate (dest);
+
+ do_composite (op,
+ src, mask, dest,
+ src_x, src_y,
+ mask_x, mask_y,
+ dest_x, dest_y,
+ width, height);
+}
+
+PIXMAN_EXPORT pixman_bool_t
+pixman_blt (uint32_t *src_bits,
+ uint32_t *dst_bits,
+ int src_stride,
+ int dst_stride,
+ int src_bpp,
+ int dst_bpp,
+ int src_x,
+ int src_y,
+ int dst_x,
+ int dst_y,
+ int width,
+ int height)
+{
+ return _pixman_implementation_blt (get_implementation(),
+ src_bits, dst_bits, src_stride, dst_stride,
+ src_bpp, dst_bpp,
+ src_x, src_y,
+ dst_x, dst_y,
+ width, height);
+}
+
+PIXMAN_EXPORT pixman_bool_t
+pixman_fill (uint32_t *bits,
+ int stride,
+ int bpp,
+ int x,
+ int y,
+ int width,
+ int height,
+ uint32_t xor)
+{
+ return _pixman_implementation_fill (
+ get_implementation(), bits, stride, bpp, x, y, width, height, xor);
+}
+
+static uint32_t
+color_to_uint32 (const pixman_color_t *color)
+{
+ return
+ (color->alpha >> 8 << 24) |
+ (color->red >> 8 << 16) |
+ (color->green & 0xff00) |
+ (color->blue >> 8);
+}
+
+static pixman_bool_t
+color_to_pixel (pixman_color_t * color,
+ uint32_t * pixel,
+ pixman_format_code_t format)
+{
+ uint32_t c = color_to_uint32 (color);
+
+ if (!(format == PIXMAN_a8r8g8b8 ||
+ format == PIXMAN_x8r8g8b8 ||
+ format == PIXMAN_a8b8g8r8 ||
+ format == PIXMAN_x8b8g8r8 ||
+ format == PIXMAN_b8g8r8a8 ||
+ format == PIXMAN_b8g8r8x8 ||
+ format == PIXMAN_r5g6b5 ||
+ format == PIXMAN_b5g6r5 ||
+ format == PIXMAN_a8))
+ {
+ return FALSE;
+ }
+
+ if (PIXMAN_FORMAT_TYPE (format) == PIXMAN_TYPE_ABGR)
+ {
+ c = ((c & 0xff000000) >> 0) |
+ ((c & 0x00ff0000) >> 16) |
+ ((c & 0x0000ff00) >> 0) |
+ ((c & 0x000000ff) << 16);
+ }
+ if (PIXMAN_FORMAT_TYPE (format) == PIXMAN_TYPE_BGRA)
+ {
+ c = ((c & 0xff000000) >> 24) |
+ ((c & 0x00ff0000) >> 8) |
+ ((c & 0x0000ff00) << 8) |
+ ((c & 0x000000ff) << 24);
+ }
+
+ if (format == PIXMAN_a8)
+ c = c >> 24;
+ else if (format == PIXMAN_r5g6b5 ||
+ format == PIXMAN_b5g6r5)
+ c = CONVERT_8888_TO_0565 (c);
+
+#if 0
+ printf ("color: %x %x %x %x\n", color->alpha, color->red, color->green, color->blue);
+ printf ("pixel: %x\n", c);
+#endif
+
+ *pixel = c;
+ return TRUE;
+}
+
+PIXMAN_EXPORT pixman_bool_t
+pixman_image_fill_rectangles (pixman_op_t op,
+ pixman_image_t * dest,
+ pixman_color_t * color,
+ int n_rects,
+ const pixman_rectangle16_t *rects)
+{
+ pixman_box32_t stack_boxes[6];
+ pixman_box32_t *boxes;
+ pixman_bool_t result;
+ int i;
+
+ if (n_rects > 6)
+ {
+ boxes = pixman_malloc_ab (sizeof (pixman_box32_t), n_rects);
+ if (boxes == NULL)
+ return FALSE;
+ }
+ else
+ {
+ boxes = stack_boxes;
+ }
+
+ for (i = 0; i < n_rects; ++i)
+ {
+ boxes[i].x1 = rects[i].x;
+ boxes[i].y1 = rects[i].y;
+ boxes[i].x2 = boxes[i].x1 + rects[i].width;
+ boxes[i].y2 = boxes[i].y1 + rects[i].height;
+ }
+
+ result = pixman_image_fill_boxes (op, dest, color, n_rects, boxes);
+
+ if (boxes != stack_boxes)
+ free (boxes);
+
+ return result;
+}
+
+PIXMAN_EXPORT pixman_bool_t
+pixman_image_fill_boxes (pixman_op_t op,
+ pixman_image_t * dest,
+ pixman_color_t * color,
+ int n_boxes,
+ const pixman_box32_t *boxes)
+{
+ pixman_image_t *solid;
+ pixman_color_t c;
+ int i;
+
+ _pixman_image_validate (dest);
+
+ if (color->alpha == 0xffff)
+ {
+ if (op == PIXMAN_OP_OVER)
+ op = PIXMAN_OP_SRC;
+ }
+
+ if (op == PIXMAN_OP_CLEAR)
+ {
+ c.red = 0;
+ c.green = 0;
+ c.blue = 0;
+ c.alpha = 0;
+
+ color = &c;
+
+ op = PIXMAN_OP_SRC;
+ }
+
+ if (op == PIXMAN_OP_SRC)
+ {
+ uint32_t pixel;
+
+ if (color_to_pixel (color, &pixel, dest->bits.format))
+ {
+ pixman_region32_t fill_region;
+ int n_rects, j;
+ pixman_box32_t *rects;
+
+ if (!pixman_region32_init_rects (&fill_region, boxes, n_boxes))
+ return FALSE;
+
+ if (dest->common.have_clip_region)
+ {
+ if (!pixman_region32_intersect (&fill_region,
+ &fill_region,
+ &dest->common.clip_region))
+ return FALSE;
+ }
+
+ rects = pixman_region32_rectangles (&fill_region, &n_rects);
+ for (j = 0; j < n_rects; ++j)
+ {
+ const pixman_box32_t *rect = &(rects[j]);
+ pixman_fill (dest->bits.bits, dest->bits.rowstride, PIXMAN_FORMAT_BPP (dest->bits.format),
+ rect->x1, rect->y1, rect->x2 - rect->x1, rect->y2 - rect->y1,
+ pixel);
+ }
+
+ pixman_region32_fini (&fill_region);
+ return TRUE;
+ }
+ }
+
+ solid = pixman_image_create_solid_fill (color);
+ if (!solid)
+ return FALSE;
+
+ for (i = 0; i < n_boxes; ++i)
+ {
+ const pixman_box32_t *box = &(boxes[i]);
+
+ pixman_image_composite32 (op, solid, NULL, dest,
+ 0, 0, 0, 0,
+ box->x1, box->y1,
+ box->x2 - box->x1, box->y2 - box->y1);
+ }
+
+ pixman_image_unref (solid);
+
+ return TRUE;
+}
+
+/**
+ * pixman_version:
+ *
+ * Returns the version of the pixman library encoded in a single
+ * integer as per %PIXMAN_VERSION_ENCODE. The encoding ensures that
+ * later versions compare greater than earlier versions.
+ *
+ * A run-time comparison to check that pixman's version is greater than
+ * or equal to version X.Y.Z could be performed as follows:
+ *
+ * <informalexample><programlisting>
+ * if (pixman_version() >= PIXMAN_VERSION_ENCODE(X,Y,Z)) {...}
+ * </programlisting></informalexample>
+ *
+ * See also pixman_version_string() as well as the compile-time
+ * equivalents %PIXMAN_VERSION and %PIXMAN_VERSION_STRING.
+ *
+ * Return value: the encoded version.
+ **/
+PIXMAN_EXPORT int
+pixman_version (void)
+{
+ return PIXMAN_VERSION;
+}
+
+/**
+ * pixman_version_string:
+ *
+ * Returns the version of the pixman library as a human-readable string
+ * of the form "X.Y.Z".
+ *
+ * See also pixman_version() as well as the compile-time equivalents
+ * %PIXMAN_VERSION_STRING and %PIXMAN_VERSION.
+ *
+ * Return value: a string containing the version.
+ **/
+PIXMAN_EXPORT const char*
+pixman_version_string (void)
+{
+ return PIXMAN_VERSION_STRING;
+}
+
+/**
+ * pixman_format_supported_source:
+ * @format: A pixman_format_code_t format
+ *
+ * Return value: whether the provided format code is a supported
+ * format for a pixman surface used as a source in
+ * rendering.
+ *
+ * Currently, all pixman_format_code_t values are supported.
+ **/
+PIXMAN_EXPORT pixman_bool_t
+pixman_format_supported_source (pixman_format_code_t format)
+{
+ switch (format)
+ {
+ /* 32 bpp formats */
+ case PIXMAN_a2b10g10r10:
+ case PIXMAN_x2b10g10r10:
+ case PIXMAN_a2r10g10b10:
+ case PIXMAN_x2r10g10b10:
+ case PIXMAN_a8r8g8b8:
+ case PIXMAN_x8r8g8b8:
+ case PIXMAN_a8b8g8r8:
+ case PIXMAN_x8b8g8r8:
+ case PIXMAN_b8g8r8a8:
+ case PIXMAN_b8g8r8x8:
+ case PIXMAN_r8g8b8:
+ case PIXMAN_b8g8r8:
+ case PIXMAN_r5g6b5:
+ case PIXMAN_b5g6r5:
+ case PIXMAN_x14r6g6b6:
+ /* 16 bpp formats */
+ case PIXMAN_a1r5g5b5:
+ case PIXMAN_x1r5g5b5:
+ case PIXMAN_a1b5g5r5:
+ case PIXMAN_x1b5g5r5:
+ case PIXMAN_a4r4g4b4:
+ case PIXMAN_x4r4g4b4:
+ case PIXMAN_a4b4g4r4:
+ case PIXMAN_x4b4g4r4:
+ /* 8bpp formats */
+ case PIXMAN_a8:
+ case PIXMAN_r3g3b2:
+ case PIXMAN_b2g3r3:
+ case PIXMAN_a2r2g2b2:
+ case PIXMAN_a2b2g2r2:
+ case PIXMAN_c8:
+ case PIXMAN_g8:
+ case PIXMAN_x4a4:
+ /* Collides with PIXMAN_c8
+ case PIXMAN_x4c4:
+ */
+ /* Collides with PIXMAN_g8
+ case PIXMAN_x4g4:
+ */
+ /* 4bpp formats */
+ case PIXMAN_a4:
+ case PIXMAN_r1g2b1:
+ case PIXMAN_b1g2r1:
+ case PIXMAN_a1r1g1b1:
+ case PIXMAN_a1b1g1r1:
+ case PIXMAN_c4:
+ case PIXMAN_g4:
+ /* 1bpp formats */
+ case PIXMAN_a1:
+ case PIXMAN_g1:
+ /* YUV formats */
+ case PIXMAN_yuy2:
+ case PIXMAN_yv12:
+ return TRUE;
+
+ default:
+ return FALSE;
+ }
+}
+
+/**
+ * pixman_format_supported_destination:
+ * @format: A pixman_format_code_t format
+ *
+ * Return value: whether the provided format code is a supported
+ * format for a pixman surface used as a destination in
+ * rendering.
+ *
+ * Currently, all pixman_format_code_t values are supported
+ * except for the YUV formats.
+ **/
+PIXMAN_EXPORT pixman_bool_t
+pixman_format_supported_destination (pixman_format_code_t format)
+{
+ /* YUV formats cannot be written to at the moment */
+ if (format == PIXMAN_yuy2 || format == PIXMAN_yv12)
+ return FALSE;
+
+ return pixman_format_supported_source (format);
+}
+
+PIXMAN_EXPORT pixman_bool_t
+pixman_compute_composite_region (pixman_region16_t * region,
+ pixman_image_t * src_image,
+ pixman_image_t * mask_image,
+ pixman_image_t * dst_image,
+ int16_t src_x,
+ int16_t src_y,
+ int16_t mask_x,
+ int16_t mask_y,
+ int16_t dest_x,
+ int16_t dest_y,
+ uint16_t width,
+ uint16_t height)
+{
+ pixman_region32_t r32;
+ pixman_bool_t retval;
+
+ pixman_region32_init (&r32);
+
+ retval = pixman_compute_composite_region32 (
+ &r32, src_image, mask_image, dst_image,
+ src_x, src_y, mask_x, mask_y, dest_x, dest_y,
+ width, height);
+
+ if (retval)
+ {
+ if (!pixman_region16_copy_from_region32 (region, &r32))
+ retval = FALSE;
+ }
+
+ pixman_region32_fini (&r32);
+ return retval;
+}
diff --git a/pixman/pixman/pixman.h b/pixman/pixman/pixman.h index 964d04ab9..08494c467 100644 --- a/pixman/pixman/pixman.h +++ b/pixman/pixman/pixman.h @@ -1,936 +1,950 @@ -/*********************************************************** - -Copyright 1987, 1998 The Open Group - -Permission to use, copy, modify, distribute, and sell this software and its -documentation for any purpose is hereby granted without fee, provided that -the above copyright notice appear in all copies and that both that -copyright notice and this permission notice appear in supporting -documentation. - -The above copyright notice and this permission notice shall be included in -all copies or substantial portions of the Software. - -THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR -IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, -FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE -OPEN GROUP BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN -AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN -CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. - -Except as contained in this notice, the name of The Open Group shall not be -used in advertising or otherwise to promote the sale, use or other dealings -in this Software without prior written authorization from The Open Group. - -Copyright 1987 by Digital Equipment Corporation, Maynard, Massachusetts. - - All Rights Reserved - -Permission to use, copy, modify, and distribute this software and its -documentation for any purpose and without fee is hereby granted, -provided that the above copyright notice appear in all copies and that -both that copyright notice and this permission notice appear in -supporting documentation, and that the name of Digital not be -used in advertising or publicity pertaining to distribution of the -software without specific, written prior permission. - -DIGITAL DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE, INCLUDING -ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO EVENT SHALL -DIGITAL BE LIABLE FOR ANY SPECIAL, INDIRECT OR CONSEQUENTIAL DAMAGES OR -ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, -WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, -ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS -SOFTWARE. - -******************************************************************/ -/* - * Copyright © 1998, 2004 Keith Packard - * Copyright 2007 Red Hat, Inc. - * - * Permission to use, copy, modify, distribute, and sell this software and its - * documentation for any purpose is hereby granted without fee, provided that - * the above copyright notice appear in all copies and that both that - * copyright notice and this permission notice appear in supporting - * documentation, and that the name of Keith Packard not be used in - * advertising or publicity pertaining to distribution of the software without - * specific, written prior permission. Keith Packard makes no - * representations about the suitability of this software for any purpose. It - * is provided "as is" without express or implied warranty. - * - * KEITH PACKARD DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE, - * INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO - * EVENT SHALL KEITH PACKARD BE LIABLE FOR ANY SPECIAL, INDIRECT OR - * CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, - * DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER - * TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR - * PERFORMANCE OF THIS SOFTWARE. - */ - -#ifndef PIXMAN_H__ -#define PIXMAN_H__ - -#include <pixman-version.h> - -#ifdef __cplusplus -#define PIXMAN_BEGIN_DECLS extern "C" { -#define PIXMAN_END_DECLS } -#else -#define PIXMAN_BEGIN_DECLS -#define PIXMAN_END_DECLS -#endif - -PIXMAN_BEGIN_DECLS - -/* - * Standard integers - */ - -#if !defined (PIXMAN_DONT_DEFINE_STDINT) - -#if defined (_SVR4) || defined (SVR4) || defined (__OpenBSD__) || defined (_sgi) || defined (__sun) || defined (sun) || defined (__digital__) || defined (__HP_cc) -# include <inttypes.h> -/* VS 2010 (_MSC_VER 1600) has stdint.h */ -#elif defined (_MSC_VER) && _MSC_VER < 1600 -typedef __int8 int8_t; -typedef unsigned __int8 uint8_t; -typedef __int16 int16_t; -typedef unsigned __int16 uint16_t; -typedef __int32 int32_t; -typedef unsigned __int32 uint32_t; -typedef __int64 int64_t; -typedef unsigned __int64 uint64_t; -#elif defined (_AIX) -# include <sys/inttypes.h> -#else -# include <stdint.h> -#endif - -#endif - -/* - * Boolean - */ -typedef int pixman_bool_t; - -/* - * Fixpoint numbers - */ -typedef int64_t pixman_fixed_32_32_t; -typedef pixman_fixed_32_32_t pixman_fixed_48_16_t; -typedef uint32_t pixman_fixed_1_31_t; -typedef uint32_t pixman_fixed_1_16_t; -typedef int32_t pixman_fixed_16_16_t; -typedef pixman_fixed_16_16_t pixman_fixed_t; - -#define pixman_fixed_e ((pixman_fixed_t) 1) -#define pixman_fixed_1 (pixman_int_to_fixed(1)) -#define pixman_fixed_1_minus_e (pixman_fixed_1 - pixman_fixed_e) -#define pixman_fixed_minus_1 (pixman_int_to_fixed(-1)) -#define pixman_fixed_to_int(f) ((int) ((f) >> 16)) -#define pixman_int_to_fixed(i) ((pixman_fixed_t) ((i) << 16)) -#define pixman_fixed_to_double(f) (double) ((f) / (double) pixman_fixed_1) -#define pixman_double_to_fixed(d) ((pixman_fixed_t) ((d) * 65536.0)) -#define pixman_fixed_frac(f) ((f) & pixman_fixed_1_minus_e) -#define pixman_fixed_floor(f) ((f) & ~pixman_fixed_1_minus_e) -#define pixman_fixed_ceil(f) pixman_fixed_floor ((f) + pixman_fixed_1_minus_e) -#define pixman_fixed_fraction(f) ((f) & pixman_fixed_1_minus_e) -#define pixman_fixed_mod_2(f) ((f) & (pixman_fixed1 | pixman_fixed_1_minus_e)) -#define pixman_max_fixed_48_16 ((pixman_fixed_48_16_t) 0x7fffffff) -#define pixman_min_fixed_48_16 (-((pixman_fixed_48_16_t) 1 << 31)) - -/* - * Misc structs - */ -typedef struct pixman_color pixman_color_t; -typedef struct pixman_point_fixed pixman_point_fixed_t; -typedef struct pixman_line_fixed pixman_line_fixed_t; -typedef struct pixman_vector pixman_vector_t; -typedef struct pixman_transform pixman_transform_t; - -struct pixman_color -{ - uint16_t red; - uint16_t green; - uint16_t blue; - uint16_t alpha; -}; - -struct pixman_point_fixed -{ - pixman_fixed_t x; - pixman_fixed_t y; -}; - -struct pixman_line_fixed -{ - pixman_point_fixed_t p1, p2; -}; - -/* - * Fixed point matrices - */ - -struct pixman_vector -{ - pixman_fixed_t vector[3]; -}; - -struct pixman_transform -{ - pixman_fixed_t matrix[3][3]; -}; - -/* forward declaration (sorry) */ -struct pixman_box16; -typedef union pixman_image pixman_image_t; - -void pixman_transform_init_identity (struct pixman_transform *matrix); -pixman_bool_t pixman_transform_point_3d (const struct pixman_transform *transform, - struct pixman_vector *vector); -pixman_bool_t pixman_transform_point (const struct pixman_transform *transform, - struct pixman_vector *vector); -pixman_bool_t pixman_transform_multiply (struct pixman_transform *dst, - const struct pixman_transform *l, - const struct pixman_transform *r); -void pixman_transform_init_scale (struct pixman_transform *t, - pixman_fixed_t sx, - pixman_fixed_t sy); -pixman_bool_t pixman_transform_scale (struct pixman_transform *forward, - struct pixman_transform *reverse, - pixman_fixed_t sx, - pixman_fixed_t sy); -void pixman_transform_init_rotate (struct pixman_transform *t, - pixman_fixed_t cos, - pixman_fixed_t sin); -pixman_bool_t pixman_transform_rotate (struct pixman_transform *forward, - struct pixman_transform *reverse, - pixman_fixed_t c, - pixman_fixed_t s); -void pixman_transform_init_translate (struct pixman_transform *t, - pixman_fixed_t tx, - pixman_fixed_t ty); -pixman_bool_t pixman_transform_translate (struct pixman_transform *forward, - struct pixman_transform *reverse, - pixman_fixed_t tx, - pixman_fixed_t ty); -pixman_bool_t pixman_transform_bounds (const struct pixman_transform *matrix, - struct pixman_box16 *b); -pixman_bool_t pixman_transform_invert (struct pixman_transform *dst, - const struct pixman_transform *src); -pixman_bool_t pixman_transform_is_identity (const struct pixman_transform *t); -pixman_bool_t pixman_transform_is_scale (const struct pixman_transform *t); -pixman_bool_t pixman_transform_is_int_translate (const struct pixman_transform *t); -pixman_bool_t pixman_transform_is_inverse (const struct pixman_transform *a, - const struct pixman_transform *b); - -/* - * Floating point matrices - */ -struct pixman_f_vector -{ - double v[3]; -}; - -struct pixman_f_transform -{ - double m[3][3]; -}; - -pixman_bool_t pixman_transform_from_pixman_f_transform (struct pixman_transform *t, - const struct pixman_f_transform *ft); -void pixman_f_transform_from_pixman_transform (struct pixman_f_transform *ft, - const struct pixman_transform *t); -pixman_bool_t pixman_f_transform_invert (struct pixman_f_transform *dst, - const struct pixman_f_transform *src); -pixman_bool_t pixman_f_transform_point (const struct pixman_f_transform *t, - struct pixman_f_vector *v); -void pixman_f_transform_point_3d (const struct pixman_f_transform *t, - struct pixman_f_vector *v); -void pixman_f_transform_multiply (struct pixman_f_transform *dst, - const struct pixman_f_transform *l, - const struct pixman_f_transform *r); -void pixman_f_transform_init_scale (struct pixman_f_transform *t, - double sx, - double sy); -pixman_bool_t pixman_f_transform_scale (struct pixman_f_transform *forward, - struct pixman_f_transform *reverse, - double sx, - double sy); -void pixman_f_transform_init_rotate (struct pixman_f_transform *t, - double cos, - double sin); -pixman_bool_t pixman_f_transform_rotate (struct pixman_f_transform *forward, - struct pixman_f_transform *reverse, - double c, - double s); -void pixman_f_transform_init_translate (struct pixman_f_transform *t, - double tx, - double ty); -pixman_bool_t pixman_f_transform_translate (struct pixman_f_transform *forward, - struct pixman_f_transform *reverse, - double tx, - double ty); -pixman_bool_t pixman_f_transform_bounds (const struct pixman_f_transform *t, - struct pixman_box16 *b); -void pixman_f_transform_init_identity (struct pixman_f_transform *t); - -typedef enum -{ - PIXMAN_REPEAT_NONE, - PIXMAN_REPEAT_NORMAL, - PIXMAN_REPEAT_PAD, - PIXMAN_REPEAT_REFLECT -} pixman_repeat_t; - -typedef enum -{ - PIXMAN_FILTER_FAST, - PIXMAN_FILTER_GOOD, - PIXMAN_FILTER_BEST, - PIXMAN_FILTER_NEAREST, - PIXMAN_FILTER_BILINEAR, - PIXMAN_FILTER_CONVOLUTION -} pixman_filter_t; - -typedef enum -{ - PIXMAN_OP_CLEAR = 0x00, - PIXMAN_OP_SRC = 0x01, - PIXMAN_OP_DST = 0x02, - PIXMAN_OP_OVER = 0x03, - PIXMAN_OP_OVER_REVERSE = 0x04, - PIXMAN_OP_IN = 0x05, - PIXMAN_OP_IN_REVERSE = 0x06, - PIXMAN_OP_OUT = 0x07, - PIXMAN_OP_OUT_REVERSE = 0x08, - PIXMAN_OP_ATOP = 0x09, - PIXMAN_OP_ATOP_REVERSE = 0x0a, - PIXMAN_OP_XOR = 0x0b, - PIXMAN_OP_ADD = 0x0c, - PIXMAN_OP_SATURATE = 0x0d, - - PIXMAN_OP_DISJOINT_CLEAR = 0x10, - PIXMAN_OP_DISJOINT_SRC = 0x11, - PIXMAN_OP_DISJOINT_DST = 0x12, - PIXMAN_OP_DISJOINT_OVER = 0x13, - PIXMAN_OP_DISJOINT_OVER_REVERSE = 0x14, - PIXMAN_OP_DISJOINT_IN = 0x15, - PIXMAN_OP_DISJOINT_IN_REVERSE = 0x16, - PIXMAN_OP_DISJOINT_OUT = 0x17, - PIXMAN_OP_DISJOINT_OUT_REVERSE = 0x18, - PIXMAN_OP_DISJOINT_ATOP = 0x19, - PIXMAN_OP_DISJOINT_ATOP_REVERSE = 0x1a, - PIXMAN_OP_DISJOINT_XOR = 0x1b, - - PIXMAN_OP_CONJOINT_CLEAR = 0x20, - PIXMAN_OP_CONJOINT_SRC = 0x21, - PIXMAN_OP_CONJOINT_DST = 0x22, - PIXMAN_OP_CONJOINT_OVER = 0x23, - PIXMAN_OP_CONJOINT_OVER_REVERSE = 0x24, - PIXMAN_OP_CONJOINT_IN = 0x25, - PIXMAN_OP_CONJOINT_IN_REVERSE = 0x26, - PIXMAN_OP_CONJOINT_OUT = 0x27, - PIXMAN_OP_CONJOINT_OUT_REVERSE = 0x28, - PIXMAN_OP_CONJOINT_ATOP = 0x29, - PIXMAN_OP_CONJOINT_ATOP_REVERSE = 0x2a, - PIXMAN_OP_CONJOINT_XOR = 0x2b, - - PIXMAN_OP_MULTIPLY = 0x30, - PIXMAN_OP_SCREEN = 0x31, - PIXMAN_OP_OVERLAY = 0x32, - PIXMAN_OP_DARKEN = 0x33, - PIXMAN_OP_LIGHTEN = 0x34, - PIXMAN_OP_COLOR_DODGE = 0x35, - PIXMAN_OP_COLOR_BURN = 0x36, - PIXMAN_OP_HARD_LIGHT = 0x37, - PIXMAN_OP_SOFT_LIGHT = 0x38, - PIXMAN_OP_DIFFERENCE = 0x39, - PIXMAN_OP_EXCLUSION = 0x3a, - PIXMAN_OP_HSL_HUE = 0x3b, - PIXMAN_OP_HSL_SATURATION = 0x3c, - PIXMAN_OP_HSL_COLOR = 0x3d, - PIXMAN_OP_HSL_LUMINOSITY = 0x3e - -#ifdef PIXMAN_USE_INTERNAL_API - , - PIXMAN_N_OPERATORS, - PIXMAN_OP_NONE = PIXMAN_N_OPERATORS -#endif -} pixman_op_t; - -/* - * Regions - */ -typedef struct pixman_region16_data pixman_region16_data_t; -typedef struct pixman_box16 pixman_box16_t; -typedef struct pixman_rectangle16 pixman_rectangle16_t; -typedef struct pixman_region16 pixman_region16_t; - -struct pixman_region16_data { - long size; - long numRects; -/* pixman_box16_t rects[size]; in memory but not explicitly declared */ -}; - -struct pixman_rectangle16 -{ - int16_t x, y; - uint16_t width, height; -}; - -struct pixman_box16 -{ - int16_t x1, y1, x2, y2; -}; - -struct pixman_region16 -{ - pixman_box16_t extents; - pixman_region16_data_t *data; -}; - -typedef enum -{ - PIXMAN_REGION_OUT, - PIXMAN_REGION_IN, - PIXMAN_REGION_PART -} pixman_region_overlap_t; - -/* This function exists only to make it possible to preserve - * the X ABI - it should go away at first opportunity. - */ -void pixman_region_set_static_pointers (pixman_box16_t *empty_box, - pixman_region16_data_t *empty_data, - pixman_region16_data_t *broken_data); - -/* creation/destruction */ -void pixman_region_init (pixman_region16_t *region); -void pixman_region_init_rect (pixman_region16_t *region, - int x, - int y, - unsigned int width, - unsigned int height); -pixman_bool_t pixman_region_init_rects (pixman_region16_t *region, - const pixman_box16_t *boxes, - int count); -void pixman_region_init_with_extents (pixman_region16_t *region, - pixman_box16_t *extents); -void pixman_region_init_from_image (pixman_region16_t *region, - pixman_image_t *image); -void pixman_region_fini (pixman_region16_t *region); - - - -/* manipulation */ -void pixman_region_translate (pixman_region16_t *region, - int x, - int y); -pixman_bool_t pixman_region_copy (pixman_region16_t *dest, - pixman_region16_t *source); -pixman_bool_t pixman_region_intersect (pixman_region16_t *new_reg, - pixman_region16_t *reg1, - pixman_region16_t *reg2); -pixman_bool_t pixman_region_union (pixman_region16_t *new_reg, - pixman_region16_t *reg1, - pixman_region16_t *reg2); -pixman_bool_t pixman_region_union_rect (pixman_region16_t *dest, - pixman_region16_t *source, - int x, - int y, - unsigned int width, - unsigned int height); -pixman_bool_t pixman_region_subtract (pixman_region16_t *reg_d, - pixman_region16_t *reg_m, - pixman_region16_t *reg_s); -pixman_bool_t pixman_region_inverse (pixman_region16_t *new_reg, - pixman_region16_t *reg1, - pixman_box16_t *inv_rect); -pixman_bool_t pixman_region_contains_point (pixman_region16_t *region, - int x, - int y, - pixman_box16_t *box); -pixman_region_overlap_t pixman_region_contains_rectangle (pixman_region16_t *region, - pixman_box16_t *prect); -pixman_bool_t pixman_region_not_empty (pixman_region16_t *region); -pixman_box16_t * pixman_region_extents (pixman_region16_t *region); -int pixman_region_n_rects (pixman_region16_t *region); -pixman_box16_t * pixman_region_rectangles (pixman_region16_t *region, - int *n_rects); -pixman_bool_t pixman_region_equal (pixman_region16_t *region1, - pixman_region16_t *region2); -pixman_bool_t pixman_region_selfcheck (pixman_region16_t *region); -void pixman_region_reset (pixman_region16_t *region, - pixman_box16_t *box); -/* - * 32 bit regions - */ -typedef struct pixman_region32_data pixman_region32_data_t; -typedef struct pixman_box32 pixman_box32_t; -typedef struct pixman_rectangle32 pixman_rectangle32_t; -typedef struct pixman_region32 pixman_region32_t; - -struct pixman_region32_data { - long size; - long numRects; -/* pixman_box32_t rects[size]; in memory but not explicitly declared */ -}; - -struct pixman_rectangle32 -{ - int32_t x, y; - uint32_t width, height; -}; - -struct pixman_box32 -{ - int32_t x1, y1, x2, y2; -}; - -struct pixman_region32 -{ - pixman_box32_t extents; - pixman_region32_data_t *data; -}; - -/* creation/destruction */ -void pixman_region32_init (pixman_region32_t *region); -void pixman_region32_init_rect (pixman_region32_t *region, - int x, - int y, - unsigned int width, - unsigned int height); -pixman_bool_t pixman_region32_init_rects (pixman_region32_t *region, - const pixman_box32_t *boxes, - int count); -void pixman_region32_init_with_extents (pixman_region32_t *region, - pixman_box32_t *extents); -void pixman_region32_init_from_image (pixman_region32_t *region, - pixman_image_t *image); -void pixman_region32_fini (pixman_region32_t *region); - - -/* manipulation */ -void pixman_region32_translate (pixman_region32_t *region, - int x, - int y); -pixman_bool_t pixman_region32_copy (pixman_region32_t *dest, - pixman_region32_t *source); -pixman_bool_t pixman_region32_intersect (pixman_region32_t *new_reg, - pixman_region32_t *reg1, - pixman_region32_t *reg2); -pixman_bool_t pixman_region32_union (pixman_region32_t *new_reg, - pixman_region32_t *reg1, - pixman_region32_t *reg2); -pixman_bool_t pixman_region32_union_rect (pixman_region32_t *dest, - pixman_region32_t *source, - int x, - int y, - unsigned int width, - unsigned int height); -pixman_bool_t pixman_region32_subtract (pixman_region32_t *reg_d, - pixman_region32_t *reg_m, - pixman_region32_t *reg_s); -pixman_bool_t pixman_region32_inverse (pixman_region32_t *new_reg, - pixman_region32_t *reg1, - pixman_box32_t *inv_rect); -pixman_bool_t pixman_region32_contains_point (pixman_region32_t *region, - int x, - int y, - pixman_box32_t *box); -pixman_region_overlap_t pixman_region32_contains_rectangle (pixman_region32_t *region, - pixman_box32_t *prect); -pixman_bool_t pixman_region32_not_empty (pixman_region32_t *region); -pixman_box32_t * pixman_region32_extents (pixman_region32_t *region); -int pixman_region32_n_rects (pixman_region32_t *region); -pixman_box32_t * pixman_region32_rectangles (pixman_region32_t *region, - int *n_rects); -pixman_bool_t pixman_region32_equal (pixman_region32_t *region1, - pixman_region32_t *region2); -pixman_bool_t pixman_region32_selfcheck (pixman_region32_t *region); -void pixman_region32_reset (pixman_region32_t *region, - pixman_box32_t *box); - - -/* Copy / Fill / Misc */ -pixman_bool_t pixman_blt (uint32_t *src_bits, - uint32_t *dst_bits, - int src_stride, - int dst_stride, - int src_bpp, - int dst_bpp, - int src_x, - int src_y, - int dst_x, - int dst_y, - int width, - int height); -pixman_bool_t pixman_fill (uint32_t *bits, - int stride, - int bpp, - int x, - int y, - int width, - int height, - uint32_t _xor); - -int pixman_version (void); -const char* pixman_version_string (void); - -/* - * Images - */ -typedef struct pixman_indexed pixman_indexed_t; -typedef struct pixman_gradient_stop pixman_gradient_stop_t; - -typedef uint32_t (* pixman_read_memory_func_t) (const void *src, int size); -typedef void (* pixman_write_memory_func_t) (void *dst, uint32_t value, int size); - -typedef void (* pixman_image_destroy_func_t) (pixman_image_t *image, void *data); - -struct pixman_gradient_stop { - pixman_fixed_t x; - pixman_color_t color; -}; - -#define PIXMAN_MAX_INDEXED 256 /* XXX depth must be <= 8 */ - -#if PIXMAN_MAX_INDEXED <= 256 -typedef uint8_t pixman_index_type; -#endif - -struct pixman_indexed -{ - pixman_bool_t color; - uint32_t rgba[PIXMAN_MAX_INDEXED]; - pixman_index_type ent[32768]; -}; - -/* - * While the protocol is generous in format support, the - * sample implementation allows only packed RGB and GBR - * representations for data to simplify software rendering, - */ -#define PIXMAN_FORMAT(bpp,type,a,r,g,b) (((bpp) << 24) | \ - ((type) << 16) | \ - ((a) << 12) | \ - ((r) << 8) | \ - ((g) << 4) | \ - ((b))) - -#define PIXMAN_FORMAT_BPP(f) (((f) >> 24) ) -#define PIXMAN_FORMAT_TYPE(f) (((f) >> 16) & 0xff) -#define PIXMAN_FORMAT_A(f) (((f) >> 12) & 0x0f) -#define PIXMAN_FORMAT_R(f) (((f) >> 8) & 0x0f) -#define PIXMAN_FORMAT_G(f) (((f) >> 4) & 0x0f) -#define PIXMAN_FORMAT_B(f) (((f) ) & 0x0f) -#define PIXMAN_FORMAT_RGB(f) (((f) ) & 0xfff) -#define PIXMAN_FORMAT_VIS(f) (((f) ) & 0xffff) -#define PIXMAN_FORMAT_DEPTH(f) (PIXMAN_FORMAT_A(f) + \ - PIXMAN_FORMAT_R(f) + \ - PIXMAN_FORMAT_G(f) + \ - PIXMAN_FORMAT_B(f)) - -#define PIXMAN_TYPE_OTHER 0 -#define PIXMAN_TYPE_A 1 -#define PIXMAN_TYPE_ARGB 2 -#define PIXMAN_TYPE_ABGR 3 -#define PIXMAN_TYPE_COLOR 4 -#define PIXMAN_TYPE_GRAY 5 -#define PIXMAN_TYPE_YUY2 6 -#define PIXMAN_TYPE_YV12 7 -#define PIXMAN_TYPE_BGRA 8 - -#define PIXMAN_FORMAT_COLOR(f) \ - (PIXMAN_FORMAT_TYPE(f) == PIXMAN_TYPE_ARGB || \ - PIXMAN_FORMAT_TYPE(f) == PIXMAN_TYPE_ABGR || \ - PIXMAN_FORMAT_TYPE(f) == PIXMAN_TYPE_BGRA) - -/* 32bpp formats */ -typedef enum { - PIXMAN_a8r8g8b8 = PIXMAN_FORMAT(32,PIXMAN_TYPE_ARGB,8,8,8,8), - PIXMAN_x8r8g8b8 = PIXMAN_FORMAT(32,PIXMAN_TYPE_ARGB,0,8,8,8), - PIXMAN_a8b8g8r8 = PIXMAN_FORMAT(32,PIXMAN_TYPE_ABGR,8,8,8,8), - PIXMAN_x8b8g8r8 = PIXMAN_FORMAT(32,PIXMAN_TYPE_ABGR,0,8,8,8), - PIXMAN_b8g8r8a8 = PIXMAN_FORMAT(32,PIXMAN_TYPE_BGRA,8,8,8,8), - PIXMAN_b8g8r8x8 = PIXMAN_FORMAT(32,PIXMAN_TYPE_BGRA,0,8,8,8), - PIXMAN_x2r10g10b10 = PIXMAN_FORMAT(32,PIXMAN_TYPE_ARGB,0,10,10,10), - PIXMAN_a2r10g10b10 = PIXMAN_FORMAT(32,PIXMAN_TYPE_ARGB,2,10,10,10), - PIXMAN_x2b10g10r10 = PIXMAN_FORMAT(32,PIXMAN_TYPE_ABGR,0,10,10,10), - PIXMAN_a2b10g10r10 = PIXMAN_FORMAT(32,PIXMAN_TYPE_ABGR,2,10,10,10), - -/* 24bpp formats */ - PIXMAN_r8g8b8 = PIXMAN_FORMAT(24,PIXMAN_TYPE_ARGB,0,8,8,8), - PIXMAN_b8g8r8 = PIXMAN_FORMAT(24,PIXMAN_TYPE_ABGR,0,8,8,8), - -/* 16bpp formats */ - PIXMAN_r5g6b5 = PIXMAN_FORMAT(16,PIXMAN_TYPE_ARGB,0,5,6,5), - PIXMAN_b5g6r5 = PIXMAN_FORMAT(16,PIXMAN_TYPE_ABGR,0,5,6,5), - - PIXMAN_a1r5g5b5 = PIXMAN_FORMAT(16,PIXMAN_TYPE_ARGB,1,5,5,5), - PIXMAN_x1r5g5b5 = PIXMAN_FORMAT(16,PIXMAN_TYPE_ARGB,0,5,5,5), - PIXMAN_a1b5g5r5 = PIXMAN_FORMAT(16,PIXMAN_TYPE_ABGR,1,5,5,5), - PIXMAN_x1b5g5r5 = PIXMAN_FORMAT(16,PIXMAN_TYPE_ABGR,0,5,5,5), - PIXMAN_a4r4g4b4 = PIXMAN_FORMAT(16,PIXMAN_TYPE_ARGB,4,4,4,4), - PIXMAN_x4r4g4b4 = PIXMAN_FORMAT(16,PIXMAN_TYPE_ARGB,0,4,4,4), - PIXMAN_a4b4g4r4 = PIXMAN_FORMAT(16,PIXMAN_TYPE_ABGR,4,4,4,4), - PIXMAN_x4b4g4r4 = PIXMAN_FORMAT(16,PIXMAN_TYPE_ABGR,0,4,4,4), - -/* 8bpp formats */ - PIXMAN_a8 = PIXMAN_FORMAT(8,PIXMAN_TYPE_A,8,0,0,0), - PIXMAN_r3g3b2 = PIXMAN_FORMAT(8,PIXMAN_TYPE_ARGB,0,3,3,2), - PIXMAN_b2g3r3 = PIXMAN_FORMAT(8,PIXMAN_TYPE_ABGR,0,3,3,2), - PIXMAN_a2r2g2b2 = PIXMAN_FORMAT(8,PIXMAN_TYPE_ARGB,2,2,2,2), - PIXMAN_a2b2g2r2 = PIXMAN_FORMAT(8,PIXMAN_TYPE_ABGR,2,2,2,2), - - PIXMAN_c8 = PIXMAN_FORMAT(8,PIXMAN_TYPE_COLOR,0,0,0,0), - PIXMAN_g8 = PIXMAN_FORMAT(8,PIXMAN_TYPE_GRAY,0,0,0,0), - - PIXMAN_x4a4 = PIXMAN_FORMAT(8,PIXMAN_TYPE_A,4,0,0,0), - - PIXMAN_x4c4 = PIXMAN_FORMAT(8,PIXMAN_TYPE_COLOR,0,0,0,0), - PIXMAN_x4g4 = PIXMAN_FORMAT(8,PIXMAN_TYPE_GRAY,0,0,0,0), - -/* 4bpp formats */ - PIXMAN_a4 = PIXMAN_FORMAT(4,PIXMAN_TYPE_A,4,0,0,0), - PIXMAN_r1g2b1 = PIXMAN_FORMAT(4,PIXMAN_TYPE_ARGB,0,1,2,1), - PIXMAN_b1g2r1 = PIXMAN_FORMAT(4,PIXMAN_TYPE_ABGR,0,1,2,1), - PIXMAN_a1r1g1b1 = PIXMAN_FORMAT(4,PIXMAN_TYPE_ARGB,1,1,1,1), - PIXMAN_a1b1g1r1 = PIXMAN_FORMAT(4,PIXMAN_TYPE_ABGR,1,1,1,1), - - PIXMAN_c4 = PIXMAN_FORMAT(4,PIXMAN_TYPE_COLOR,0,0,0,0), - PIXMAN_g4 = PIXMAN_FORMAT(4,PIXMAN_TYPE_GRAY,0,0,0,0), - -/* 1bpp formats */ - PIXMAN_a1 = PIXMAN_FORMAT(1,PIXMAN_TYPE_A,1,0,0,0), - - PIXMAN_g1 = PIXMAN_FORMAT(1,PIXMAN_TYPE_GRAY,0,0,0,0), - -/* YUV formats */ - PIXMAN_yuy2 = PIXMAN_FORMAT(16,PIXMAN_TYPE_YUY2,0,0,0,0), - PIXMAN_yv12 = PIXMAN_FORMAT(12,PIXMAN_TYPE_YV12,0,0,0,0) -} pixman_format_code_t; - -/* Querying supported format values. */ -pixman_bool_t pixman_format_supported_destination (pixman_format_code_t format); -pixman_bool_t pixman_format_supported_source (pixman_format_code_t format); - -/* Constructors */ -pixman_image_t *pixman_image_create_solid_fill (pixman_color_t *color); -pixman_image_t *pixman_image_create_linear_gradient (pixman_point_fixed_t *p1, - pixman_point_fixed_t *p2, - const pixman_gradient_stop_t *stops, - int n_stops); -pixman_image_t *pixman_image_create_radial_gradient (pixman_point_fixed_t *inner, - pixman_point_fixed_t *outer, - pixman_fixed_t inner_radius, - pixman_fixed_t outer_radius, - const pixman_gradient_stop_t *stops, - int n_stops); -pixman_image_t *pixman_image_create_conical_gradient (pixman_point_fixed_t *center, - pixman_fixed_t angle, - const pixman_gradient_stop_t *stops, - int n_stops); -pixman_image_t *pixman_image_create_bits (pixman_format_code_t format, - int width, - int height, - uint32_t *bits, - int rowstride_bytes); - -/* Destructor */ -pixman_image_t *pixman_image_ref (pixman_image_t *image); -pixman_bool_t pixman_image_unref (pixman_image_t *image); - -void pixman_image_set_destroy_function (pixman_image_t *image, - pixman_image_destroy_func_t function, - void *data); -void * pixman_image_get_destroy_data (pixman_image_t *image); - -/* Set properties */ -pixman_bool_t pixman_image_set_clip_region (pixman_image_t *image, - pixman_region16_t *region); -pixman_bool_t pixman_image_set_clip_region32 (pixman_image_t *image, - pixman_region32_t *region); -void pixman_image_set_has_client_clip (pixman_image_t *image, - pixman_bool_t clien_clip); -pixman_bool_t pixman_image_set_transform (pixman_image_t *image, - const pixman_transform_t *transform); -void pixman_image_set_repeat (pixman_image_t *image, - pixman_repeat_t repeat); -pixman_bool_t pixman_image_set_filter (pixman_image_t *image, - pixman_filter_t filter, - const pixman_fixed_t *filter_params, - int n_filter_params); -void pixman_image_set_source_clipping (pixman_image_t *image, - pixman_bool_t source_clipping); -void pixman_image_set_alpha_map (pixman_image_t *image, - pixman_image_t *alpha_map, - int16_t x, - int16_t y); -void pixman_image_set_component_alpha (pixman_image_t *image, - pixman_bool_t component_alpha); -void pixman_image_set_accessors (pixman_image_t *image, - pixman_read_memory_func_t read_func, - pixman_write_memory_func_t write_func); -void pixman_image_set_indexed (pixman_image_t *image, - const pixman_indexed_t *indexed); -uint32_t *pixman_image_get_data (pixman_image_t *image); -int pixman_image_get_width (pixman_image_t *image); -int pixman_image_get_height (pixman_image_t *image); -int pixman_image_get_stride (pixman_image_t *image); /* in bytes */ -int pixman_image_get_depth (pixman_image_t *image); -pixman_bool_t pixman_image_fill_rectangles (pixman_op_t op, - pixman_image_t *image, - pixman_color_t *color, - int n_rects, - const pixman_rectangle16_t *rects); -pixman_bool_t pixman_image_fill_boxes (pixman_op_t op, - pixman_image_t *dest, - pixman_color_t *color, - int n_boxes, - const pixman_box32_t *boxes); - -/* Composite */ -pixman_bool_t pixman_compute_composite_region (pixman_region16_t *region, - pixman_image_t *src_image, - pixman_image_t *mask_image, - pixman_image_t *dst_image, - int16_t src_x, - int16_t src_y, - int16_t mask_x, - int16_t mask_y, - int16_t dest_x, - int16_t dest_y, - uint16_t width, - uint16_t height); -void pixman_image_composite (pixman_op_t op, - pixman_image_t *src, - pixman_image_t *mask, - pixman_image_t *dest, - int16_t src_x, - int16_t src_y, - int16_t mask_x, - int16_t mask_y, - int16_t dest_x, - int16_t dest_y, - uint16_t width, - uint16_t height); -void pixman_image_composite32 (pixman_op_t op, - pixman_image_t *src, - pixman_image_t *mask, - pixman_image_t *dest, - int32_t src_x, - int32_t src_y, - int32_t mask_x, - int32_t mask_y, - int32_t dest_x, - int32_t dest_y, - int32_t width, - int32_t height); - -/* Old X servers rely on out-of-bounds accesses when they are asked - * to composite with a window as the source. They create a pixman image - * pointing to some bogus position in memory, but then they set a clip - * region to the position where the actual bits are. - * - * Due to a bug in old versions of pixman, where it would not clip - * against the image bounds when a clip region was set, this would - * actually work. So by default we allow certain out-of-bound access - * to happen unless explicitly disabled. - * - * Fixed X servers should call this function to disable the workaround. - */ -void pixman_disable_out_of_bounds_workaround (void); - -/* - * Trapezoids - */ -typedef struct pixman_edge pixman_edge_t; -typedef struct pixman_trapezoid pixman_trapezoid_t; -typedef struct pixman_trap pixman_trap_t; -typedef struct pixman_span_fix pixman_span_fix_t; - -/* - * An edge structure. This represents a single polygon edge - * and can be quickly stepped across small or large gaps in the - * sample grid - */ -struct pixman_edge -{ - pixman_fixed_t x; - pixman_fixed_t e; - pixman_fixed_t stepx; - pixman_fixed_t signdx; - pixman_fixed_t dy; - pixman_fixed_t dx; - - pixman_fixed_t stepx_small; - pixman_fixed_t stepx_big; - pixman_fixed_t dx_small; - pixman_fixed_t dx_big; -}; - -struct pixman_trapezoid -{ - pixman_fixed_t top, bottom; - pixman_line_fixed_t left, right; -}; - - -/* whether 't' is a well defined not obviously empty trapezoid */ -#define pixman_trapezoid_valid(t) \ - ((t)->left.p1.y != (t)->left.p2.y && \ - (t)->right.p1.y != (t)->right.p2.y && \ - (int) ((t)->bottom - (t)->top) > 0) - -struct pixman_span_fix -{ - pixman_fixed_t l, r, y; -}; - -struct pixman_trap -{ - pixman_span_fix_t top, bot; -}; - -pixman_fixed_t pixman_sample_ceil_y (pixman_fixed_t y, - int bpp); -pixman_fixed_t pixman_sample_floor_y (pixman_fixed_t y, - int bpp); -void pixman_edge_step (pixman_edge_t *e, - int n); -void pixman_edge_init (pixman_edge_t *e, - int bpp, - pixman_fixed_t y_start, - pixman_fixed_t x_top, - pixman_fixed_t y_top, - pixman_fixed_t x_bot, - pixman_fixed_t y_bot); -void pixman_line_fixed_edge_init (pixman_edge_t *e, - int bpp, - pixman_fixed_t y, - const pixman_line_fixed_t *line, - int x_off, - int y_off); -void pixman_rasterize_edges (pixman_image_t *image, - pixman_edge_t *l, - pixman_edge_t *r, - pixman_fixed_t t, - pixman_fixed_t b); -void pixman_add_traps (pixman_image_t *image, - int16_t x_off, - int16_t y_off, - int ntrap, - pixman_trap_t *traps); -void pixman_add_trapezoids (pixman_image_t *image, - int16_t x_off, - int y_off, - int ntraps, - const pixman_trapezoid_t *traps); -void pixman_rasterize_trapezoid (pixman_image_t *image, - const pixman_trapezoid_t *trap, - int x_off, - int y_off); - -PIXMAN_END_DECLS - -#endif /* PIXMAN_H__ */ +/***********************************************************
+
+Copyright 1987, 1998 The Open Group
+
+Permission to use, copy, modify, distribute, and sell this software and its
+documentation for any purpose is hereby granted without fee, provided that
+the above copyright notice appear in all copies and that both that
+copyright notice and this permission notice appear in supporting
+documentation.
+
+The above copyright notice and this permission notice shall be included in
+all copies or substantial portions of the Software.
+
+THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+OPEN GROUP BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN
+AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
+
+Except as contained in this notice, the name of The Open Group shall not be
+used in advertising or otherwise to promote the sale, use or other dealings
+in this Software without prior written authorization from The Open Group.
+
+Copyright 1987 by Digital Equipment Corporation, Maynard, Massachusetts.
+
+ All Rights Reserved
+
+Permission to use, copy, modify, and distribute this software and its
+documentation for any purpose and without fee is hereby granted,
+provided that the above copyright notice appear in all copies and that
+both that copyright notice and this permission notice appear in
+supporting documentation, and that the name of Digital not be
+used in advertising or publicity pertaining to distribution of the
+software without specific, written prior permission.
+
+DIGITAL DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE, INCLUDING
+ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO EVENT SHALL
+DIGITAL BE LIABLE FOR ANY SPECIAL, INDIRECT OR CONSEQUENTIAL DAMAGES OR
+ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS,
+WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION,
+ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS
+SOFTWARE.
+
+******************************************************************/
+/*
+ * Copyright © 1998, 2004 Keith Packard
+ * Copyright 2007 Red Hat, Inc.
+ *
+ * Permission to use, copy, modify, distribute, and sell this software and its
+ * documentation for any purpose is hereby granted without fee, provided that
+ * the above copyright notice appear in all copies and that both that
+ * copyright notice and this permission notice appear in supporting
+ * documentation, and that the name of Keith Packard not be used in
+ * advertising or publicity pertaining to distribution of the software without
+ * specific, written prior permission. Keith Packard makes no
+ * representations about the suitability of this software for any purpose. It
+ * is provided "as is" without express or implied warranty.
+ *
+ * KEITH PACKARD DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE,
+ * INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO
+ * EVENT SHALL KEITH PACKARD BE LIABLE FOR ANY SPECIAL, INDIRECT OR
+ * CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE,
+ * DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER
+ * TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
+ * PERFORMANCE OF THIS SOFTWARE.
+ */
+
+#ifndef PIXMAN_H__
+#define PIXMAN_H__
+
+#include <pixman-version.h>
+
+#ifdef __cplusplus
+#define PIXMAN_BEGIN_DECLS extern "C" {
+#define PIXMAN_END_DECLS }
+#else
+#define PIXMAN_BEGIN_DECLS
+#define PIXMAN_END_DECLS
+#endif
+
+PIXMAN_BEGIN_DECLS
+
+/*
+ * Standard integers
+ */
+
+#if !defined (PIXMAN_DONT_DEFINE_STDINT)
+
+#if defined (_SVR4) || defined (SVR4) || defined (__OpenBSD__) || defined (_sgi) || defined (__sun) || defined (sun) || defined (__digital__) || defined (__HP_cc)
+# include <inttypes.h>
+/* VS 2010 (_MSC_VER 1600) has stdint.h */
+#elif defined (_MSC_VER) && _MSC_VER < 1600
+typedef __int8 int8_t;
+typedef unsigned __int8 uint8_t;
+typedef __int16 int16_t;
+typedef unsigned __int16 uint16_t;
+typedef __int32 int32_t;
+typedef unsigned __int32 uint32_t;
+typedef __int64 int64_t;
+typedef unsigned __int64 uint64_t;
+#elif defined (_AIX)
+# include <sys/inttypes.h>
+#else
+# include <stdint.h>
+#endif
+
+#endif
+
+/*
+ * Boolean
+ */
+typedef int pixman_bool_t;
+
+/*
+ * Fixpoint numbers
+ */
+typedef int64_t pixman_fixed_32_32_t;
+typedef pixman_fixed_32_32_t pixman_fixed_48_16_t;
+typedef uint32_t pixman_fixed_1_31_t;
+typedef uint32_t pixman_fixed_1_16_t;
+typedef int32_t pixman_fixed_16_16_t;
+typedef pixman_fixed_16_16_t pixman_fixed_t;
+
+#define pixman_fixed_e ((pixman_fixed_t) 1)
+#define pixman_fixed_1 (pixman_int_to_fixed(1))
+#define pixman_fixed_1_minus_e (pixman_fixed_1 - pixman_fixed_e)
+#define pixman_fixed_minus_1 (pixman_int_to_fixed(-1))
+#define pixman_fixed_to_int(f) ((int) ((f) >> 16))
+#define pixman_int_to_fixed(i) ((pixman_fixed_t) ((i) << 16))
+#define pixman_fixed_to_double(f) (double) ((f) / (double) pixman_fixed_1)
+#define pixman_double_to_fixed(d) ((pixman_fixed_t) ((d) * 65536.0))
+#define pixman_fixed_frac(f) ((f) & pixman_fixed_1_minus_e)
+#define pixman_fixed_floor(f) ((f) & ~pixman_fixed_1_minus_e)
+#define pixman_fixed_ceil(f) pixman_fixed_floor ((f) + pixman_fixed_1_minus_e)
+#define pixman_fixed_fraction(f) ((f) & pixman_fixed_1_minus_e)
+#define pixman_fixed_mod_2(f) ((f) & (pixman_fixed1 | pixman_fixed_1_minus_e))
+#define pixman_max_fixed_48_16 ((pixman_fixed_48_16_t) 0x7fffffff)
+#define pixman_min_fixed_48_16 (-((pixman_fixed_48_16_t) 1 << 31))
+
+/*
+ * Misc structs
+ */
+typedef struct pixman_color pixman_color_t;
+typedef struct pixman_point_fixed pixman_point_fixed_t;
+typedef struct pixman_line_fixed pixman_line_fixed_t;
+typedef struct pixman_vector pixman_vector_t;
+typedef struct pixman_transform pixman_transform_t;
+
+struct pixman_color
+{
+ uint16_t red;
+ uint16_t green;
+ uint16_t blue;
+ uint16_t alpha;
+};
+
+struct pixman_point_fixed
+{
+ pixman_fixed_t x;
+ pixman_fixed_t y;
+};
+
+struct pixman_line_fixed
+{
+ pixman_point_fixed_t p1, p2;
+};
+
+/*
+ * Fixed point matrices
+ */
+
+struct pixman_vector
+{
+ pixman_fixed_t vector[3];
+};
+
+struct pixman_transform
+{
+ pixman_fixed_t matrix[3][3];
+};
+
+/* forward declaration (sorry) */
+struct pixman_box16;
+typedef union pixman_image pixman_image_t;
+
+void pixman_transform_init_identity (struct pixman_transform *matrix);
+pixman_bool_t pixman_transform_point_3d (const struct pixman_transform *transform,
+ struct pixman_vector *vector);
+pixman_bool_t pixman_transform_point (const struct pixman_transform *transform,
+ struct pixman_vector *vector);
+pixman_bool_t pixman_transform_multiply (struct pixman_transform *dst,
+ const struct pixman_transform *l,
+ const struct pixman_transform *r);
+void pixman_transform_init_scale (struct pixman_transform *t,
+ pixman_fixed_t sx,
+ pixman_fixed_t sy);
+pixman_bool_t pixman_transform_scale (struct pixman_transform *forward,
+ struct pixman_transform *reverse,
+ pixman_fixed_t sx,
+ pixman_fixed_t sy);
+void pixman_transform_init_rotate (struct pixman_transform *t,
+ pixman_fixed_t cos,
+ pixman_fixed_t sin);
+pixman_bool_t pixman_transform_rotate (struct pixman_transform *forward,
+ struct pixman_transform *reverse,
+ pixman_fixed_t c,
+ pixman_fixed_t s);
+void pixman_transform_init_translate (struct pixman_transform *t,
+ pixman_fixed_t tx,
+ pixman_fixed_t ty);
+pixman_bool_t pixman_transform_translate (struct pixman_transform *forward,
+ struct pixman_transform *reverse,
+ pixman_fixed_t tx,
+ pixman_fixed_t ty);
+pixman_bool_t pixman_transform_bounds (const struct pixman_transform *matrix,
+ struct pixman_box16 *b);
+pixman_bool_t pixman_transform_invert (struct pixman_transform *dst,
+ const struct pixman_transform *src);
+pixman_bool_t pixman_transform_is_identity (const struct pixman_transform *t);
+pixman_bool_t pixman_transform_is_scale (const struct pixman_transform *t);
+pixman_bool_t pixman_transform_is_int_translate (const struct pixman_transform *t);
+pixman_bool_t pixman_transform_is_inverse (const struct pixman_transform *a,
+ const struct pixman_transform *b);
+
+/*
+ * Floating point matrices
+ */
+struct pixman_f_vector
+{
+ double v[3];
+};
+
+struct pixman_f_transform
+{
+ double m[3][3];
+};
+
+pixman_bool_t pixman_transform_from_pixman_f_transform (struct pixman_transform *t,
+ const struct pixman_f_transform *ft);
+void pixman_f_transform_from_pixman_transform (struct pixman_f_transform *ft,
+ const struct pixman_transform *t);
+pixman_bool_t pixman_f_transform_invert (struct pixman_f_transform *dst,
+ const struct pixman_f_transform *src);
+pixman_bool_t pixman_f_transform_point (const struct pixman_f_transform *t,
+ struct pixman_f_vector *v);
+void pixman_f_transform_point_3d (const struct pixman_f_transform *t,
+ struct pixman_f_vector *v);
+void pixman_f_transform_multiply (struct pixman_f_transform *dst,
+ const struct pixman_f_transform *l,
+ const struct pixman_f_transform *r);
+void pixman_f_transform_init_scale (struct pixman_f_transform *t,
+ double sx,
+ double sy);
+pixman_bool_t pixman_f_transform_scale (struct pixman_f_transform *forward,
+ struct pixman_f_transform *reverse,
+ double sx,
+ double sy);
+void pixman_f_transform_init_rotate (struct pixman_f_transform *t,
+ double cos,
+ double sin);
+pixman_bool_t pixman_f_transform_rotate (struct pixman_f_transform *forward,
+ struct pixman_f_transform *reverse,
+ double c,
+ double s);
+void pixman_f_transform_init_translate (struct pixman_f_transform *t,
+ double tx,
+ double ty);
+pixman_bool_t pixman_f_transform_translate (struct pixman_f_transform *forward,
+ struct pixman_f_transform *reverse,
+ double tx,
+ double ty);
+pixman_bool_t pixman_f_transform_bounds (const struct pixman_f_transform *t,
+ struct pixman_box16 *b);
+void pixman_f_transform_init_identity (struct pixman_f_transform *t);
+
+typedef enum
+{
+ PIXMAN_REPEAT_NONE,
+ PIXMAN_REPEAT_NORMAL,
+ PIXMAN_REPEAT_PAD,
+ PIXMAN_REPEAT_REFLECT
+} pixman_repeat_t;
+
+typedef enum
+{
+ PIXMAN_FILTER_FAST,
+ PIXMAN_FILTER_GOOD,
+ PIXMAN_FILTER_BEST,
+ PIXMAN_FILTER_NEAREST,
+ PIXMAN_FILTER_BILINEAR,
+ PIXMAN_FILTER_CONVOLUTION
+} pixman_filter_t;
+
+typedef enum
+{
+ PIXMAN_OP_CLEAR = 0x00,
+ PIXMAN_OP_SRC = 0x01,
+ PIXMAN_OP_DST = 0x02,
+ PIXMAN_OP_OVER = 0x03,
+ PIXMAN_OP_OVER_REVERSE = 0x04,
+ PIXMAN_OP_IN = 0x05,
+ PIXMAN_OP_IN_REVERSE = 0x06,
+ PIXMAN_OP_OUT = 0x07,
+ PIXMAN_OP_OUT_REVERSE = 0x08,
+ PIXMAN_OP_ATOP = 0x09,
+ PIXMAN_OP_ATOP_REVERSE = 0x0a,
+ PIXMAN_OP_XOR = 0x0b,
+ PIXMAN_OP_ADD = 0x0c,
+ PIXMAN_OP_SATURATE = 0x0d,
+
+ PIXMAN_OP_DISJOINT_CLEAR = 0x10,
+ PIXMAN_OP_DISJOINT_SRC = 0x11,
+ PIXMAN_OP_DISJOINT_DST = 0x12,
+ PIXMAN_OP_DISJOINT_OVER = 0x13,
+ PIXMAN_OP_DISJOINT_OVER_REVERSE = 0x14,
+ PIXMAN_OP_DISJOINT_IN = 0x15,
+ PIXMAN_OP_DISJOINT_IN_REVERSE = 0x16,
+ PIXMAN_OP_DISJOINT_OUT = 0x17,
+ PIXMAN_OP_DISJOINT_OUT_REVERSE = 0x18,
+ PIXMAN_OP_DISJOINT_ATOP = 0x19,
+ PIXMAN_OP_DISJOINT_ATOP_REVERSE = 0x1a,
+ PIXMAN_OP_DISJOINT_XOR = 0x1b,
+
+ PIXMAN_OP_CONJOINT_CLEAR = 0x20,
+ PIXMAN_OP_CONJOINT_SRC = 0x21,
+ PIXMAN_OP_CONJOINT_DST = 0x22,
+ PIXMAN_OP_CONJOINT_OVER = 0x23,
+ PIXMAN_OP_CONJOINT_OVER_REVERSE = 0x24,
+ PIXMAN_OP_CONJOINT_IN = 0x25,
+ PIXMAN_OP_CONJOINT_IN_REVERSE = 0x26,
+ PIXMAN_OP_CONJOINT_OUT = 0x27,
+ PIXMAN_OP_CONJOINT_OUT_REVERSE = 0x28,
+ PIXMAN_OP_CONJOINT_ATOP = 0x29,
+ PIXMAN_OP_CONJOINT_ATOP_REVERSE = 0x2a,
+ PIXMAN_OP_CONJOINT_XOR = 0x2b,
+
+ PIXMAN_OP_MULTIPLY = 0x30,
+ PIXMAN_OP_SCREEN = 0x31,
+ PIXMAN_OP_OVERLAY = 0x32,
+ PIXMAN_OP_DARKEN = 0x33,
+ PIXMAN_OP_LIGHTEN = 0x34,
+ PIXMAN_OP_COLOR_DODGE = 0x35,
+ PIXMAN_OP_COLOR_BURN = 0x36,
+ PIXMAN_OP_HARD_LIGHT = 0x37,
+ PIXMAN_OP_SOFT_LIGHT = 0x38,
+ PIXMAN_OP_DIFFERENCE = 0x39,
+ PIXMAN_OP_EXCLUSION = 0x3a,
+ PIXMAN_OP_HSL_HUE = 0x3b,
+ PIXMAN_OP_HSL_SATURATION = 0x3c,
+ PIXMAN_OP_HSL_COLOR = 0x3d,
+ PIXMAN_OP_HSL_LUMINOSITY = 0x3e
+
+#ifdef PIXMAN_USE_INTERNAL_API
+ ,
+ PIXMAN_N_OPERATORS,
+ PIXMAN_OP_NONE = PIXMAN_N_OPERATORS
+#endif
+} pixman_op_t;
+
+/*
+ * Regions
+ */
+typedef struct pixman_region16_data pixman_region16_data_t;
+typedef struct pixman_box16 pixman_box16_t;
+typedef struct pixman_rectangle16 pixman_rectangle16_t;
+typedef struct pixman_region16 pixman_region16_t;
+
+struct pixman_region16_data {
+ long size;
+ long numRects;
+/* pixman_box16_t rects[size]; in memory but not explicitly declared */
+};
+
+struct pixman_rectangle16
+{
+ int16_t x, y;
+ uint16_t width, height;
+};
+
+struct pixman_box16
+{
+ int16_t x1, y1, x2, y2;
+};
+
+struct pixman_region16
+{
+ pixman_box16_t extents;
+ pixman_region16_data_t *data;
+};
+
+typedef enum
+{
+ PIXMAN_REGION_OUT,
+ PIXMAN_REGION_IN,
+ PIXMAN_REGION_PART
+} pixman_region_overlap_t;
+
+/* This function exists only to make it possible to preserve
+ * the X ABI - it should go away at first opportunity.
+ */
+void pixman_region_set_static_pointers (pixman_box16_t *empty_box,
+ pixman_region16_data_t *empty_data,
+ pixman_region16_data_t *broken_data);
+
+/* creation/destruction */
+void pixman_region_init (pixman_region16_t *region);
+void pixman_region_init_rect (pixman_region16_t *region,
+ int x,
+ int y,
+ unsigned int width,
+ unsigned int height);
+pixman_bool_t pixman_region_init_rects (pixman_region16_t *region,
+ const pixman_box16_t *boxes,
+ int count);
+void pixman_region_init_with_extents (pixman_region16_t *region,
+ pixman_box16_t *extents);
+void pixman_region_init_from_image (pixman_region16_t *region,
+ pixman_image_t *image);
+void pixman_region_fini (pixman_region16_t *region);
+
+
+/* manipulation */
+void pixman_region_translate (pixman_region16_t *region,
+ int x,
+ int y);
+pixman_bool_t pixman_region_copy (pixman_region16_t *dest,
+ pixman_region16_t *source);
+pixman_bool_t pixman_region_intersect (pixman_region16_t *new_reg,
+ pixman_region16_t *reg1,
+ pixman_region16_t *reg2);
+pixman_bool_t pixman_region_union (pixman_region16_t *new_reg,
+ pixman_region16_t *reg1,
+ pixman_region16_t *reg2);
+pixman_bool_t pixman_region_union_rect (pixman_region16_t *dest,
+ pixman_region16_t *source,
+ int x,
+ int y,
+ unsigned int width,
+ unsigned int height);
+pixman_bool_t pixman_region_intersect_rect (pixman_region16_t *dest,
+ pixman_region16_t *source,
+ int x,
+ int y,
+ unsigned int width,
+ unsigned int height);
+pixman_bool_t pixman_region_subtract (pixman_region16_t *reg_d,
+ pixman_region16_t *reg_m,
+ pixman_region16_t *reg_s);
+pixman_bool_t pixman_region_inverse (pixman_region16_t *new_reg,
+ pixman_region16_t *reg1,
+ pixman_box16_t *inv_rect);
+pixman_bool_t pixman_region_contains_point (pixman_region16_t *region,
+ int x,
+ int y,
+ pixman_box16_t *box);
+pixman_region_overlap_t pixman_region_contains_rectangle (pixman_region16_t *region,
+ pixman_box16_t *prect);
+pixman_bool_t pixman_region_not_empty (pixman_region16_t *region);
+pixman_box16_t * pixman_region_extents (pixman_region16_t *region);
+int pixman_region_n_rects (pixman_region16_t *region);
+pixman_box16_t * pixman_region_rectangles (pixman_region16_t *region,
+ int *n_rects);
+pixman_bool_t pixman_region_equal (pixman_region16_t *region1,
+ pixman_region16_t *region2);
+pixman_bool_t pixman_region_selfcheck (pixman_region16_t *region);
+void pixman_region_reset (pixman_region16_t *region,
+ pixman_box16_t *box);
+/*
+ * 32 bit regions
+ */
+typedef struct pixman_region32_data pixman_region32_data_t;
+typedef struct pixman_box32 pixman_box32_t;
+typedef struct pixman_rectangle32 pixman_rectangle32_t;
+typedef struct pixman_region32 pixman_region32_t;
+
+struct pixman_region32_data {
+ long size;
+ long numRects;
+/* pixman_box32_t rects[size]; in memory but not explicitly declared */
+};
+
+struct pixman_rectangle32
+{
+ int32_t x, y;
+ uint32_t width, height;
+};
+
+struct pixman_box32
+{
+ int32_t x1, y1, x2, y2;
+};
+
+struct pixman_region32
+{
+ pixman_box32_t extents;
+ pixman_region32_data_t *data;
+};
+
+/* creation/destruction */
+void pixman_region32_init (pixman_region32_t *region);
+void pixman_region32_init_rect (pixman_region32_t *region,
+ int x,
+ int y,
+ unsigned int width,
+ unsigned int height);
+pixman_bool_t pixman_region32_init_rects (pixman_region32_t *region,
+ const pixman_box32_t *boxes,
+ int count);
+void pixman_region32_init_with_extents (pixman_region32_t *region,
+ pixman_box32_t *extents);
+void pixman_region32_init_from_image (pixman_region32_t *region,
+ pixman_image_t *image);
+void pixman_region32_fini (pixman_region32_t *region);
+
+
+/* manipulation */
+void pixman_region32_translate (pixman_region32_t *region,
+ int x,
+ int y);
+pixman_bool_t pixman_region32_copy (pixman_region32_t *dest,
+ pixman_region32_t *source);
+pixman_bool_t pixman_region32_intersect (pixman_region32_t *new_reg,
+ pixman_region32_t *reg1,
+ pixman_region32_t *reg2);
+pixman_bool_t pixman_region32_union (pixman_region32_t *new_reg,
+ pixman_region32_t *reg1,
+ pixman_region32_t *reg2);
+pixman_bool_t pixman_region32_intersect_rect (pixman_region32_t *dest,
+ pixman_region32_t *source,
+ int x,
+ int y,
+ unsigned int width,
+ unsigned int height);
+pixman_bool_t pixman_region32_union_rect (pixman_region32_t *dest,
+ pixman_region32_t *source,
+ int x,
+ int y,
+ unsigned int width,
+ unsigned int height);
+pixman_bool_t pixman_region32_subtract (pixman_region32_t *reg_d,
+ pixman_region32_t *reg_m,
+ pixman_region32_t *reg_s);
+pixman_bool_t pixman_region32_inverse (pixman_region32_t *new_reg,
+ pixman_region32_t *reg1,
+ pixman_box32_t *inv_rect);
+pixman_bool_t pixman_region32_contains_point (pixman_region32_t *region,
+ int x,
+ int y,
+ pixman_box32_t *box);
+pixman_region_overlap_t pixman_region32_contains_rectangle (pixman_region32_t *region,
+ pixman_box32_t *prect);
+pixman_bool_t pixman_region32_not_empty (pixman_region32_t *region);
+pixman_box32_t * pixman_region32_extents (pixman_region32_t *region);
+int pixman_region32_n_rects (pixman_region32_t *region);
+pixman_box32_t * pixman_region32_rectangles (pixman_region32_t *region,
+ int *n_rects);
+pixman_bool_t pixman_region32_equal (pixman_region32_t *region1,
+ pixman_region32_t *region2);
+pixman_bool_t pixman_region32_selfcheck (pixman_region32_t *region);
+void pixman_region32_reset (pixman_region32_t *region,
+ pixman_box32_t *box);
+
+
+/* Copy / Fill / Misc */
+pixman_bool_t pixman_blt (uint32_t *src_bits,
+ uint32_t *dst_bits,
+ int src_stride,
+ int dst_stride,
+ int src_bpp,
+ int dst_bpp,
+ int src_x,
+ int src_y,
+ int dst_x,
+ int dst_y,
+ int width,
+ int height);
+pixman_bool_t pixman_fill (uint32_t *bits,
+ int stride,
+ int bpp,
+ int x,
+ int y,
+ int width,
+ int height,
+ uint32_t _xor);
+
+int pixman_version (void);
+const char* pixman_version_string (void);
+
+/*
+ * Images
+ */
+typedef struct pixman_indexed pixman_indexed_t;
+typedef struct pixman_gradient_stop pixman_gradient_stop_t;
+
+typedef uint32_t (* pixman_read_memory_func_t) (const void *src, int size);
+typedef void (* pixman_write_memory_func_t) (void *dst, uint32_t value, int size);
+
+typedef void (* pixman_image_destroy_func_t) (pixman_image_t *image, void *data);
+
+struct pixman_gradient_stop {
+ pixman_fixed_t x;
+ pixman_color_t color;
+};
+
+#define PIXMAN_MAX_INDEXED 256 /* XXX depth must be <= 8 */
+
+#if PIXMAN_MAX_INDEXED <= 256
+typedef uint8_t pixman_index_type;
+#endif
+
+struct pixman_indexed
+{
+ pixman_bool_t color;
+ uint32_t rgba[PIXMAN_MAX_INDEXED];
+ pixman_index_type ent[32768];
+};
+
+/*
+ * While the protocol is generous in format support, the
+ * sample implementation allows only packed RGB and GBR
+ * representations for data to simplify software rendering,
+ */
+#define PIXMAN_FORMAT(bpp,type,a,r,g,b) (((bpp) << 24) | \
+ ((type) << 16) | \
+ ((a) << 12) | \
+ ((r) << 8) | \
+ ((g) << 4) | \
+ ((b)))
+
+#define PIXMAN_FORMAT_BPP(f) (((f) >> 24) )
+#define PIXMAN_FORMAT_TYPE(f) (((f) >> 16) & 0xff)
+#define PIXMAN_FORMAT_A(f) (((f) >> 12) & 0x0f)
+#define PIXMAN_FORMAT_R(f) (((f) >> 8) & 0x0f)
+#define PIXMAN_FORMAT_G(f) (((f) >> 4) & 0x0f)
+#define PIXMAN_FORMAT_B(f) (((f) ) & 0x0f)
+#define PIXMAN_FORMAT_RGB(f) (((f) ) & 0xfff)
+#define PIXMAN_FORMAT_VIS(f) (((f) ) & 0xffff)
+#define PIXMAN_FORMAT_DEPTH(f) (PIXMAN_FORMAT_A(f) + \
+ PIXMAN_FORMAT_R(f) + \
+ PIXMAN_FORMAT_G(f) + \
+ PIXMAN_FORMAT_B(f))
+
+#define PIXMAN_TYPE_OTHER 0
+#define PIXMAN_TYPE_A 1
+#define PIXMAN_TYPE_ARGB 2
+#define PIXMAN_TYPE_ABGR 3
+#define PIXMAN_TYPE_COLOR 4
+#define PIXMAN_TYPE_GRAY 5
+#define PIXMAN_TYPE_YUY2 6
+#define PIXMAN_TYPE_YV12 7
+#define PIXMAN_TYPE_BGRA 8
+
+#define PIXMAN_FORMAT_COLOR(f) \
+ (PIXMAN_FORMAT_TYPE(f) == PIXMAN_TYPE_ARGB || \
+ PIXMAN_FORMAT_TYPE(f) == PIXMAN_TYPE_ABGR || \
+ PIXMAN_FORMAT_TYPE(f) == PIXMAN_TYPE_BGRA)
+
+/* 32bpp formats */
+typedef enum {
+ PIXMAN_a8r8g8b8 = PIXMAN_FORMAT(32,PIXMAN_TYPE_ARGB,8,8,8,8),
+ PIXMAN_x8r8g8b8 = PIXMAN_FORMAT(32,PIXMAN_TYPE_ARGB,0,8,8,8),
+ PIXMAN_a8b8g8r8 = PIXMAN_FORMAT(32,PIXMAN_TYPE_ABGR,8,8,8,8),
+ PIXMAN_x8b8g8r8 = PIXMAN_FORMAT(32,PIXMAN_TYPE_ABGR,0,8,8,8),
+ PIXMAN_b8g8r8a8 = PIXMAN_FORMAT(32,PIXMAN_TYPE_BGRA,8,8,8,8),
+ PIXMAN_b8g8r8x8 = PIXMAN_FORMAT(32,PIXMAN_TYPE_BGRA,0,8,8,8),
+ PIXMAN_x14r6g6b6 = PIXMAN_FORMAT(32,PIXMAN_TYPE_ARGB,0,6,6,6),
+ PIXMAN_x2r10g10b10 = PIXMAN_FORMAT(32,PIXMAN_TYPE_ARGB,0,10,10,10),
+ PIXMAN_a2r10g10b10 = PIXMAN_FORMAT(32,PIXMAN_TYPE_ARGB,2,10,10,10),
+ PIXMAN_x2b10g10r10 = PIXMAN_FORMAT(32,PIXMAN_TYPE_ABGR,0,10,10,10),
+ PIXMAN_a2b10g10r10 = PIXMAN_FORMAT(32,PIXMAN_TYPE_ABGR,2,10,10,10),
+
+/* 24bpp formats */
+ PIXMAN_r8g8b8 = PIXMAN_FORMAT(24,PIXMAN_TYPE_ARGB,0,8,8,8),
+ PIXMAN_b8g8r8 = PIXMAN_FORMAT(24,PIXMAN_TYPE_ABGR,0,8,8,8),
+
+/* 16bpp formats */
+ PIXMAN_r5g6b5 = PIXMAN_FORMAT(16,PIXMAN_TYPE_ARGB,0,5,6,5),
+ PIXMAN_b5g6r5 = PIXMAN_FORMAT(16,PIXMAN_TYPE_ABGR,0,5,6,5),
+
+ PIXMAN_a1r5g5b5 = PIXMAN_FORMAT(16,PIXMAN_TYPE_ARGB,1,5,5,5),
+ PIXMAN_x1r5g5b5 = PIXMAN_FORMAT(16,PIXMAN_TYPE_ARGB,0,5,5,5),
+ PIXMAN_a1b5g5r5 = PIXMAN_FORMAT(16,PIXMAN_TYPE_ABGR,1,5,5,5),
+ PIXMAN_x1b5g5r5 = PIXMAN_FORMAT(16,PIXMAN_TYPE_ABGR,0,5,5,5),
+ PIXMAN_a4r4g4b4 = PIXMAN_FORMAT(16,PIXMAN_TYPE_ARGB,4,4,4,4),
+ PIXMAN_x4r4g4b4 = PIXMAN_FORMAT(16,PIXMAN_TYPE_ARGB,0,4,4,4),
+ PIXMAN_a4b4g4r4 = PIXMAN_FORMAT(16,PIXMAN_TYPE_ABGR,4,4,4,4),
+ PIXMAN_x4b4g4r4 = PIXMAN_FORMAT(16,PIXMAN_TYPE_ABGR,0,4,4,4),
+
+/* 8bpp formats */
+ PIXMAN_a8 = PIXMAN_FORMAT(8,PIXMAN_TYPE_A,8,0,0,0),
+ PIXMAN_r3g3b2 = PIXMAN_FORMAT(8,PIXMAN_TYPE_ARGB,0,3,3,2),
+ PIXMAN_b2g3r3 = PIXMAN_FORMAT(8,PIXMAN_TYPE_ABGR,0,3,3,2),
+ PIXMAN_a2r2g2b2 = PIXMAN_FORMAT(8,PIXMAN_TYPE_ARGB,2,2,2,2),
+ PIXMAN_a2b2g2r2 = PIXMAN_FORMAT(8,PIXMAN_TYPE_ABGR,2,2,2,2),
+
+ PIXMAN_c8 = PIXMAN_FORMAT(8,PIXMAN_TYPE_COLOR,0,0,0,0),
+ PIXMAN_g8 = PIXMAN_FORMAT(8,PIXMAN_TYPE_GRAY,0,0,0,0),
+
+ PIXMAN_x4a4 = PIXMAN_FORMAT(8,PIXMAN_TYPE_A,4,0,0,0),
+
+ PIXMAN_x4c4 = PIXMAN_FORMAT(8,PIXMAN_TYPE_COLOR,0,0,0,0),
+ PIXMAN_x4g4 = PIXMAN_FORMAT(8,PIXMAN_TYPE_GRAY,0,0,0,0),
+
+/* 4bpp formats */
+ PIXMAN_a4 = PIXMAN_FORMAT(4,PIXMAN_TYPE_A,4,0,0,0),
+ PIXMAN_r1g2b1 = PIXMAN_FORMAT(4,PIXMAN_TYPE_ARGB,0,1,2,1),
+ PIXMAN_b1g2r1 = PIXMAN_FORMAT(4,PIXMAN_TYPE_ABGR,0,1,2,1),
+ PIXMAN_a1r1g1b1 = PIXMAN_FORMAT(4,PIXMAN_TYPE_ARGB,1,1,1,1),
+ PIXMAN_a1b1g1r1 = PIXMAN_FORMAT(4,PIXMAN_TYPE_ABGR,1,1,1,1),
+
+ PIXMAN_c4 = PIXMAN_FORMAT(4,PIXMAN_TYPE_COLOR,0,0,0,0),
+ PIXMAN_g4 = PIXMAN_FORMAT(4,PIXMAN_TYPE_GRAY,0,0,0,0),
+
+/* 1bpp formats */
+ PIXMAN_a1 = PIXMAN_FORMAT(1,PIXMAN_TYPE_A,1,0,0,0),
+
+ PIXMAN_g1 = PIXMAN_FORMAT(1,PIXMAN_TYPE_GRAY,0,0,0,0),
+
+/* YUV formats */
+ PIXMAN_yuy2 = PIXMAN_FORMAT(16,PIXMAN_TYPE_YUY2,0,0,0,0),
+ PIXMAN_yv12 = PIXMAN_FORMAT(12,PIXMAN_TYPE_YV12,0,0,0,0)
+} pixman_format_code_t;
+
+/* Querying supported format values. */
+pixman_bool_t pixman_format_supported_destination (pixman_format_code_t format);
+pixman_bool_t pixman_format_supported_source (pixman_format_code_t format);
+
+/* Constructors */
+pixman_image_t *pixman_image_create_solid_fill (pixman_color_t *color);
+pixman_image_t *pixman_image_create_linear_gradient (pixman_point_fixed_t *p1,
+ pixman_point_fixed_t *p2,
+ const pixman_gradient_stop_t *stops,
+ int n_stops);
+pixman_image_t *pixman_image_create_radial_gradient (pixman_point_fixed_t *inner,
+ pixman_point_fixed_t *outer,
+ pixman_fixed_t inner_radius,
+ pixman_fixed_t outer_radius,
+ const pixman_gradient_stop_t *stops,
+ int n_stops);
+pixman_image_t *pixman_image_create_conical_gradient (pixman_point_fixed_t *center,
+ pixman_fixed_t angle,
+ const pixman_gradient_stop_t *stops,
+ int n_stops);
+pixman_image_t *pixman_image_create_bits (pixman_format_code_t format,
+ int width,
+ int height,
+ uint32_t *bits,
+ int rowstride_bytes);
+
+/* Destructor */
+pixman_image_t *pixman_image_ref (pixman_image_t *image);
+pixman_bool_t pixman_image_unref (pixman_image_t *image);
+
+void pixman_image_set_destroy_function (pixman_image_t *image,
+ pixman_image_destroy_func_t function,
+ void *data);
+void * pixman_image_get_destroy_data (pixman_image_t *image);
+
+/* Set properties */
+pixman_bool_t pixman_image_set_clip_region (pixman_image_t *image,
+ pixman_region16_t *region);
+pixman_bool_t pixman_image_set_clip_region32 (pixman_image_t *image,
+ pixman_region32_t *region);
+void pixman_image_set_has_client_clip (pixman_image_t *image,
+ pixman_bool_t clien_clip);
+pixman_bool_t pixman_image_set_transform (pixman_image_t *image,
+ const pixman_transform_t *transform);
+void pixman_image_set_repeat (pixman_image_t *image,
+ pixman_repeat_t repeat);
+pixman_bool_t pixman_image_set_filter (pixman_image_t *image,
+ pixman_filter_t filter,
+ const pixman_fixed_t *filter_params,
+ int n_filter_params);
+void pixman_image_set_source_clipping (pixman_image_t *image,
+ pixman_bool_t source_clipping);
+void pixman_image_set_alpha_map (pixman_image_t *image,
+ pixman_image_t *alpha_map,
+ int16_t x,
+ int16_t y);
+void pixman_image_set_component_alpha (pixman_image_t *image,
+ pixman_bool_t component_alpha);
+pixman_bool_t pixman_image_get_component_alpha (pixman_image_t *image);
+void pixman_image_set_accessors (pixman_image_t *image,
+ pixman_read_memory_func_t read_func,
+ pixman_write_memory_func_t write_func);
+void pixman_image_set_indexed (pixman_image_t *image,
+ const pixman_indexed_t *indexed);
+uint32_t *pixman_image_get_data (pixman_image_t *image);
+int pixman_image_get_width (pixman_image_t *image);
+int pixman_image_get_height (pixman_image_t *image);
+int pixman_image_get_stride (pixman_image_t *image); /* in bytes */
+int pixman_image_get_depth (pixman_image_t *image);
+pixman_format_code_t pixman_image_get_format (pixman_image_t *image);
+pixman_bool_t pixman_image_fill_rectangles (pixman_op_t op,
+ pixman_image_t *image,
+ pixman_color_t *color,
+ int n_rects,
+ const pixman_rectangle16_t *rects);
+pixman_bool_t pixman_image_fill_boxes (pixman_op_t op,
+ pixman_image_t *dest,
+ pixman_color_t *color,
+ int n_boxes,
+ const pixman_box32_t *boxes);
+
+/* Composite */
+pixman_bool_t pixman_compute_composite_region (pixman_region16_t *region,
+ pixman_image_t *src_image,
+ pixman_image_t *mask_image,
+ pixman_image_t *dst_image,
+ int16_t src_x,
+ int16_t src_y,
+ int16_t mask_x,
+ int16_t mask_y,
+ int16_t dest_x,
+ int16_t dest_y,
+ uint16_t width,
+ uint16_t height);
+void pixman_image_composite (pixman_op_t op,
+ pixman_image_t *src,
+ pixman_image_t *mask,
+ pixman_image_t *dest,
+ int16_t src_x,
+ int16_t src_y,
+ int16_t mask_x,
+ int16_t mask_y,
+ int16_t dest_x,
+ int16_t dest_y,
+ uint16_t width,
+ uint16_t height);
+void pixman_image_composite32 (pixman_op_t op,
+ pixman_image_t *src,
+ pixman_image_t *mask,
+ pixman_image_t *dest,
+ int32_t src_x,
+ int32_t src_y,
+ int32_t mask_x,
+ int32_t mask_y,
+ int32_t dest_x,
+ int32_t dest_y,
+ int32_t width,
+ int32_t height);
+
+/* Old X servers rely on out-of-bounds accesses when they are asked
+ * to composite with a window as the source. They create a pixman image
+ * pointing to some bogus position in memory, but then they set a clip
+ * region to the position where the actual bits are.
+ *
+ * Due to a bug in old versions of pixman, where it would not clip
+ * against the image bounds when a clip region was set, this would
+ * actually work. So by default we allow certain out-of-bound access
+ * to happen unless explicitly disabled.
+ *
+ * Fixed X servers should call this function to disable the workaround.
+ */
+void pixman_disable_out_of_bounds_workaround (void);
+
+/*
+ * Trapezoids
+ */
+typedef struct pixman_edge pixman_edge_t;
+typedef struct pixman_trapezoid pixman_trapezoid_t;
+typedef struct pixman_trap pixman_trap_t;
+typedef struct pixman_span_fix pixman_span_fix_t;
+
+/*
+ * An edge structure. This represents a single polygon edge
+ * and can be quickly stepped across small or large gaps in the
+ * sample grid
+ */
+struct pixman_edge
+{
+ pixman_fixed_t x;
+ pixman_fixed_t e;
+ pixman_fixed_t stepx;
+ pixman_fixed_t signdx;
+ pixman_fixed_t dy;
+ pixman_fixed_t dx;
+
+ pixman_fixed_t stepx_small;
+ pixman_fixed_t stepx_big;
+ pixman_fixed_t dx_small;
+ pixman_fixed_t dx_big;
+};
+
+struct pixman_trapezoid
+{
+ pixman_fixed_t top, bottom;
+ pixman_line_fixed_t left, right;
+};
+
+
+/* whether 't' is a well defined not obviously empty trapezoid */
+#define pixman_trapezoid_valid(t) \
+ ((t)->left.p1.y != (t)->left.p2.y && \
+ (t)->right.p1.y != (t)->right.p2.y && \
+ (int) ((t)->bottom - (t)->top) > 0)
+
+struct pixman_span_fix
+{
+ pixman_fixed_t l, r, y;
+};
+
+struct pixman_trap
+{
+ pixman_span_fix_t top, bot;
+};
+
+pixman_fixed_t pixman_sample_ceil_y (pixman_fixed_t y,
+ int bpp);
+pixman_fixed_t pixman_sample_floor_y (pixman_fixed_t y,
+ int bpp);
+void pixman_edge_step (pixman_edge_t *e,
+ int n);
+void pixman_edge_init (pixman_edge_t *e,
+ int bpp,
+ pixman_fixed_t y_start,
+ pixman_fixed_t x_top,
+ pixman_fixed_t y_top,
+ pixman_fixed_t x_bot,
+ pixman_fixed_t y_bot);
+void pixman_line_fixed_edge_init (pixman_edge_t *e,
+ int bpp,
+ pixman_fixed_t y,
+ const pixman_line_fixed_t *line,
+ int x_off,
+ int y_off);
+void pixman_rasterize_edges (pixman_image_t *image,
+ pixman_edge_t *l,
+ pixman_edge_t *r,
+ pixman_fixed_t t,
+ pixman_fixed_t b);
+void pixman_add_traps (pixman_image_t *image,
+ int16_t x_off,
+ int16_t y_off,
+ int ntrap,
+ pixman_trap_t *traps);
+void pixman_add_trapezoids (pixman_image_t *image,
+ int16_t x_off,
+ int y_off,
+ int ntraps,
+ const pixman_trapezoid_t *traps);
+void pixman_rasterize_trapezoid (pixman_image_t *image,
+ const pixman_trapezoid_t *trap,
+ int x_off,
+ int y_off);
+
+PIXMAN_END_DECLS
+
+#endif /* PIXMAN_H__ */
diff --git a/pixman/pixman/refactor b/pixman/pixman/refactor new file mode 100644 index 000000000..b93b75c08 --- /dev/null +++ b/pixman/pixman/refactor @@ -0,0 +1,478 @@ +Roadmap
+
+- Move all the fetchers etc. into pixman-image to make pixman-compose.c
+ less intimidating.
+
+ DONE
+
+- Make combiners for unified alpha take a mask argument. That way
+ we won't need two separate paths for unified vs component in the
+ general compositing code.
+
+ DONE, except that the Altivec code needs to be updated. Luca is
+ looking into that.
+
+- Delete separate 'unified alpha' path
+
+ DONE
+
+- Split images into their own files
+
+ DONE
+
+- Split the gradient walker code out into its own file
+
+ DONE
+
+- Add scanline getters per image
+
+ DONE
+
+- Generic 64 bit fetcher
+
+ DONE
+
+- Split fast path tables into their respective architecture dependent
+ files.
+
+See "Render Algorithm" below for rationale
+
+Images will eventually have these virtual functions:
+
+ get_scanline()
+ get_scanline_wide()
+ get_pixel()
+ get_pixel_wide()
+ get_untransformed_pixel()
+ get_untransformed_pixel_wide()
+ get_unfiltered_pixel()
+ get_unfiltered_pixel_wide()
+
+ store_scanline()
+ store_scanline_wide()
+
+1.
+
+Initially we will just have get_scanline() and get_scanline_wide();
+these will be based on the ones in pixman-compose. Hopefully this will
+reduce the complexity in pixman_composite_rect_general().
+
+Note that there is access considerations - the compose function is
+being compiled twice.
+
+
+2.
+
+Split image types into their own source files. Export noop virtual
+reinit() call. Call this whenever a property of the image changes.
+
+
+3.
+
+Split the get_scanline() call into smaller functions that are
+initialized by the reinit() call.
+
+The Render Algorithm:
+ (first repeat, then filter, then transform, then clip)
+
+Starting from a destination pixel (x, y), do
+
+ 1 x = x - xDst + xSrc
+ y = y - yDst + ySrc
+
+ 2 reject pixel that is outside the clip
+
+ This treats clipping as something that happens after
+ transformation, which I think is correct for client clips. For
+ hierarchy clips it is wrong, but who really cares? Without
+ GraphicsExposes hierarchy clips are basically irrelevant. Yes,
+ you could imagine cases where the pixels of a subwindow of a
+ redirected, transformed window should be treated as
+ transparent. I don't really care
+
+ Basically, I think the render spec should say that pixels that
+ are unavailable due to the hierarcy have undefined content,
+ and that GraphicsExposes are not generated. Ie., basically
+ that using non-redirected windows as sources is fail. This is
+ at least consistent with the current implementation and we can
+ update the spec later if someone makes it work.
+
+ The implication for render is that it should stop passing the
+ hierarchy clip to pixman. In pixman, if a souce image has a
+ clip it should be used in computing the composite region and
+ nowhere else, regardless of what "has_client_clip" says. The
+ default should be for there to not be any clip.
+
+ I would really like to get rid of the client clip as well for
+ source images, but unfortunately there is at least one
+ application in the wild that uses them.
+
+ 3 Transform pixel: (x, y) = T(x, y)
+
+ 4 Call p = GetUntransformedPixel (x, y)
+
+ 5 If the image has an alpha map, then
+
+ Call GetUntransformedPixel (x, y) on the alpha map
+
+ add resulting alpha channel to p
+
+ return p
+
+ Where GetUnTransformedPixel is:
+
+ 6 switch (filter)
+ {
+ case NEAREST:
+ return GetUnfilteredPixel (x, y);
+ break;
+
+ case BILINEAR:
+ return GetUnfilteredPixel (...) // 4 times
+ break;
+
+ case CONVOLUTION:
+ return GetUnfilteredPixel (...) // as many times as necessary.
+ break;
+ }
+
+ Where GetUnfilteredPixel (x, y) is
+
+ 7 switch (repeat)
+ {
+ case REPEAT_NORMAL:
+ case REPEAT_PAD:
+ case REPEAT_REFLECT:
+ // adjust x, y as appropriate
+ break;
+
+ case REPEAT_NONE:
+ if (x, y) is outside image bounds
+ return 0;
+ break;
+ }
+
+ return GetRawPixel(x, y)
+
+ Where GetRawPixel (x, y) is
+
+ 8 Compute the pixel in question, depending on image type.
+
+For gradients, repeat has a totally different meaning, so
+UnfilteredPixel() and RawPixel() must be the same function so that
+gradients can do their own repeat algorithm.
+
+So, the GetRawPixel
+
+ for bits must deal with repeats
+ for gradients must deal with repeats (differently)
+ for solids, should ignore repeats.
+
+ for polygons, when we add them, either ignore repeats or do
+ something similar to bits (in which case, we may want an extra
+ layer of indirection to modify the coordinates).
+
+It is then possible to build things like "get scanline" or "get tile" on
+top of this. In the simplest case, just repeatedly calling GetPixel()
+would work, but specialized get_scanline()s or get_tile()s could be
+plugged in for common cases.
+
+By not plugging anything in for images with access functions, we only
+have to compile the pixel functions twice, not the scanline functions.
+
+And we can get rid of fetchers for the bizarre formats that no one
+uses. Such as b2g3r3 etc. r1g2b1? Seriously? It is also worth
+considering a generic format based pixel fetcher for these edge cases.
+
+Since the actual routines depend on the image attributes, the images
+must be notified when those change and update their function pointers
+appropriately. So there should probably be a virtual function called
+(* reinit) or something like that.
+
+There will also be wide fetchers for both pixels and lines. The line
+fetcher will just call the wide pixel fetcher. The wide pixel fetcher
+will just call expand, except for 10 bit formats.
+
+Rendering pipeline:
+
+Drawable:
+ 0. if (picture has alpha map)
+ 0.1. Position alpha map according to the alpha_x/alpha_y
+ 0.2. Where the two drawables intersect, the alpha channel
+ Replace the alpha channel of source with the one
+ from the alpha map. Replacement only takes place
+ in the intersection of the two drawables' geometries.
+ 1. Repeat the drawable according to the repeat attribute
+ 2. Reconstruct a continuous image according to the filter
+ 3. Transform according to the transform attribute
+ 4. Position image such that src_x, src_y is over dst_x, dst_y
+ 5. Sample once per destination pixel
+ 6. Clip. If a pixel is not within the source clip, then no
+ compositing takes place at that pixel. (Ie., it's *not*
+ treated as 0).
+
+ Sampling a drawable:
+
+ - If the channel does not have an alpha channel, the pixels in it
+ are treated as opaque.
+
+ Note on reconstruction:
+
+ - The top left pixel has coordinates (0.5, 0.5) and pixels are
+ spaced 1 apart.
+
+Gradient:
+ 1. Unless gradient type is conical, repeat the underlying (0, 1)
+ gradient according to the repeat attribute
+ 2. Integrate the gradient across the plane according to type.
+ 3. Transform according to transform attribute
+ 4. Position gradient
+ 5. Sample once per destination pixel.
+ 6. Clip
+
+Solid Fill:
+ 1. Repeat has no effect
+ 2. Image is already continuous and defined for the entire plane
+ 3. Transform has no effect
+ 4. Positioning has no effect
+ 5. Sample once per destination pixel.
+ 6. Clip
+
+Polygon:
+ 1. Repeat has no effect
+ 2. Image is already continuous and defined on the whole plane
+ 3. Transform according to transform attribute
+ 4. Position image
+ 5. Supersample 15x17 per destination pixel.
+ 6. Clip
+
+Possibly interesting additions:
+ - More general transformations, such as warping, or general
+ shading.
+
+ - Shader image where a function is called to generate the
+ pixel (ie., uploading assembly code).
+
+ - Resampling kernels
+
+ In principle the polygon image uses a 15x17 box filter for
+ resampling. If we allow general resampling filters, then we
+ get all the various antialiasing types for free.
+
+ Bilinear downsampling looks terrible and could be much
+ improved by a resampling filter. NEAREST reconstruction
+ combined with a box resampling filter is what GdkPixbuf
+ does, I believe.
+
+ Useful for high frequency gradients as well.
+
+ (Note that the difference between a reconstruction and a
+ resampling filter is mainly where in the pipeline they
+ occur. High quality resampling should use a correctly
+ oriented kernel so it should happen after transformation.
+
+ An implementation can transform the resampling kernel and
+ convolve it with the reconstruction if it so desires, but it
+ will need to deal with the fact that the resampling kernel
+ will not necessarily be pixel aligned.
+
+ "Output kernels"
+
+ One could imagine doing the resampling after compositing,
+ ie., for each destination pixel sample each source image 16
+ times, then composite those subpixels individually, then
+ finally apply a kernel.
+
+ However, this is effectively the same as full screen
+ antialiasing, which is a simpler way to think about it. So
+ resampling kernels may make sense for individual images, but
+ not as a post-compositing step.
+
+ Fullscreen AA is inefficient without chained compositing
+ though. Consider an (image scaled up to oversample size IN
+ some polygon) scaled down to screen size. With the current
+ implementation, there will be a huge temporary. With chained
+ compositing, the whole thing ends up being equivalent to the
+ output kernel from above.
+
+ - Color space conversion
+
+ The complete model here is that each surface has a color
+ space associated with it and that the compositing operation
+ also has one associated with it. Note also that gradients
+ should have associcated colorspaces.
+
+ - Dithering
+
+ If people dither something that is already dithered, it will
+ look terrible, but don't do that, then. (Dithering happens
+ after resampling if at all - what is the relationship
+ with color spaces? Presumably dithering should happen in linear
+ intensity space).
+
+ - Floating point surfaces, 16, 32 and possibly 64 bit per
+ channel.
+
+ Maybe crack:
+
+ - Glyph polygons
+
+ If glyphs could be given as polygons, they could be
+ positioned and rasterized more accurately. The glyph
+ structure would need subpixel positioning though.
+
+ - Luminance vs. coverage for the alpha channel
+
+ Whether the alpha channel should be interpreted as luminance
+ modulation or as coverage (intensity modulation). This is a
+ bit of a departure from the rendering model though. It could
+ also be considered whether it should be possible to have
+ both channels in the same drawable.
+
+ - Alternative for component alpha
+
+ - Set component-alpha on the output image.
+
+ - This means each of the components are sampled
+ independently and composited in the corresponding
+ channel only.
+
+ - Have 3 x oversampled mask
+
+ - Scale it down by 3 horizontally, with [ 1/3, 1/3, 1/3 ]
+ resampling filter.
+
+ Is this equivalent to just using a component alpha mask?
+
+ Incompatible changes:
+
+ - Gradients could be specified with premultiplied colors. (You
+ can use a mask to get things like gradients from solid red to
+ transparent red.
+
+Refactoring pixman
+
+The pixman code is not particularly nice to put it mildly. Among the
+issues are
+
+- inconsistent naming style (fb vs Fb, camelCase vs
+ underscore_naming). Sometimes there is even inconsistency *within*
+ one name.
+
+ fetchProc32 ACCESS(pixman_fetchProcForPicture32)
+
+ may be one of the uglies names ever created.
+
+ coding style:
+ use the one from cairo except that pixman uses this brace style:
+
+ while (blah)
+ {
+ }
+
+ Format do while like this:
+
+ do
+ {
+
+ }
+ while (...);
+
+- PIXMAN_COMPOSITE_RECT_GENERAL() is horribly complex
+
+- switch case logic in pixman-access.c
+
+ Instead it would be better to just store function pointers in the
+ image objects themselves,
+
+ get_pixel()
+ get_scanline()
+
+- Much of the scanline fetching code is for formats that no one
+ ever uses. a2r2g2b2 anyone?
+
+ It would probably be worthwhile having a generic fetcher for any
+ pixman format whatsoever.
+
+- Code related to particular image types should be split into individual
+ files.
+
+ pixman-bits-image.c
+ pixman-linear-gradient-image.c
+ pixman-radial-gradient-image.c
+ pixman-solid-image.c
+
+- Fast path code should be split into files based on architecture:
+
+ pixman-mmx-fastpath.c
+ pixman-sse2-fastpath.c
+ pixman-c-fastpath.c
+
+ etc.
+
+ Each of these files should then export a fastpath table, which would
+ be declared in pixman-private.h. This should allow us to get rid
+ of the pixman-mmx.h files.
+
+ The fast path table should describe each fast path. Ie there should
+ be bitfields indicating what things the fast path can handle, rather than
+ like now where it is only allowed to take one format per src/mask/dest. Ie.,
+
+ {
+ FAST_a8r8g8b8 | FAST_x8r8g8b8,
+ FAST_null,
+ FAST_x8r8g8b8,
+ FAST_repeat_normal | FAST_repeat_none,
+ the_fast_path
+ }
+
+There should then be *one* file that implements pixman_image_composite().
+This should do this:
+
+ optimize_operator();
+
+ convert 1x1 repeat to solid (actually this should be done at
+ image creation time).
+
+ is there a useful fastpath?
+
+There should be a file called pixman-cpu.c that contains all the
+architecture specific stuff to detect what CPU features we have.
+
+Issues that must be kept in mind:
+
+ - we need accessor code to be preserved
+
+ - maybe there should be a "store_scanline" too?
+
+ Is this sufficient?
+
+ We should preserve the optimization where the
+ compositing happens directly in the destination
+ whenever possible.
+
+ - It should be possible to create GPU samplers from the
+ images.
+
+The "horizontal" classification should be a bit in the image, the
+"vertical" classification should just happen inside the gradient
+file. Note though that
+
+ (a) these will change if the tranformation/repeat changes.
+
+ (b) at the moment the optimization for linear gradients
+ takes the source rectangle into account. Presumably
+ this is to also optimize the case where the gradient
+ is close enough to horizontal?
+
+Who is responsible for repeats? In principle it should be the scanline
+fetch. Right now NORMAL repeats are handled by walk_composite_region()
+while other repeats are handled by the scanline code.
+
+
+(Random note on filtering: do you filter before or after
+transformation? Hardware is going to filter after transformation;
+this is also what pixman does currently). It's not completely clear
+what filtering *after* transformation means. One thing that might look
+good would be to do *supersampling*, ie., compute multiple subpixels
+per destination pixel, then average them together.
diff --git a/pixman/test/Makefile.am b/pixman/test/Makefile.am index 841ff8d7d..efd9cd91a 100644 --- a/pixman/test/Makefile.am +++ b/pixman/test/Makefile.am @@ -1,84 +1,90 @@ -TEST_LDADD = $(top_builddir)/pixman/libpixman-1.la -INCLUDES = -I$(top_srcdir)/pixman -I$(top_builddir)/pixman - -TESTPROGRAMS = \ - a1-trap-test \ - region-test \ - fetch-test \ - oob-test \ - window-test \ - trap-crasher \ - alphamap \ - blitters-test \ - scaling-test \ - composite - -a1_trap_test_LDADD = $(TEST_LDADD) -fetch_test_LDADD = $(TEST_LDADD) -composite_LDADD = $(TEST_LDADD) -trap_crasher_LDADD = $(TEST_LDADD) -oob_test_LDADD = $(TEST_LDADD) -window_test_LDADD = $(TEST_LDADD) - -region_test_LDADD = $(TEST_LDADD) -region_test_SOURCES = region-test.c utils.c utils.h - -blitters_test_LDADD = $(TEST_LDADD) -blitters_test_SOURCES = blitters-test.c utils.c utils.h - -scaling_test_LDADD = $(TEST_LDADD) -scaling_test_SOURCES = scaling-test.c utils.c utils.h - -alphamap_LDADD = $(TEST_LDADD) -alphamap_SOURCES = alphamap.c utils.c utils.h - -# GTK using test programs - -if HAVE_GTK - -GTK_LDADD = $(TEST_LDADD) $(GTK_LIBS) -GTK_UTILS = gtk-utils.c gtk-utils.h - -TESTPROGRAMS_GTK = \ - clip-test \ - clip-in \ - composite-test \ - gradient-test \ - alpha-test \ - screen-test \ - convolution-test \ - trap-test \ - alphamap - -INCLUDES += $(GTK_CFLAGS) - -gradient_test_LDADD = $(GTK_LDADD) -gradient_test_SOURCES = gradient-test.c $(GTK_UTILS) - -alpha_test_LDADD = $(GTK_LDADD) -alpha_test_SOURCES = alpha-test.c $(GTK_UTILS) - -composite_test_LDADD = $(GTK_LDADD) -composite_test_SOURCES = composite-test.c $(GTK_UTILS) - -clip_test_LDADD = $(GTK_LDADD) -clip_test_SOURCES = clip-test.c $(GTK_UTILS) - -clip_in_LDADD = $(GTK_LDADD) -clip_in_SOURCES = clip-in.c $(GTK_UTILS) - -trap_test_LDADD = $(GTK_LDADD) -trap_test_SOURCES = trap-test.c $(GTK_UTILS) - -screen_test_LDADD = $(GTK_LDADD) -screen_test_SOURCES = screen-test.c $(GTK_UTILS) - -convolution_test_LDADD = $(GTK_LDADD) -convolution_test_SOURCES = convolution-test.c $(GTK_UTILS) - -endif - -noinst_PROGRAMS = $(TESTPROGRAMS) $(TESTPROGRAMS_GTK) - -TESTS = $(TESTPROGRAMS) - +AM_CFLAGS = @OPENMP_CFLAGS@
+AM_LDFLAGS = @OPENMP_CFLAGS@
+
+TEST_LDADD = $(top_builddir)/pixman/libpixman-1.la
+INCLUDES = -I$(top_srcdir)/pixman -I$(top_builddir)/pixman
+
+TESTPROGRAMS = \
+ a1-trap-test \
+ region-test \
+ fetch-test \
+ oob-test \
+ window-test \
+ gradient-crash-test \
+ trap-crasher \
+ alphamap \
+ scaling-crash-test \
+ blitters-test \
+ scaling-test \
+ composite
+
+a1_trap_test_LDADD = $(TEST_LDADD)
+fetch_test_LDADD = $(TEST_LDADD)
+composite_LDADD = $(TEST_LDADD)
+gradient_crash_test_LDADD = $(TEST_LDADD)
+trap_crasher_LDADD = $(TEST_LDADD)
+oob_test_LDADD = $(TEST_LDADD)
+window_test_LDADD = $(TEST_LDADD)
+scaling_crash_test_LDADD = $(TEST_LDADD)
+
+region_test_LDADD = $(TEST_LDADD)
+region_test_SOURCES = region-test.c utils.c utils.h
+
+blitters_test_LDADD = $(TEST_LDADD)
+blitters_test_SOURCES = blitters-test.c utils.c utils.h
+
+scaling_test_LDADD = $(TEST_LDADD)
+scaling_test_SOURCES = scaling-test.c utils.c utils.h
+
+alphamap_LDADD = $(TEST_LDADD)
+alphamap_SOURCES = alphamap.c utils.c utils.h
+
+# GTK using test programs
+
+if HAVE_GTK
+
+GTK_LDADD = $(TEST_LDADD) $(GTK_LIBS)
+GTK_UTILS = gtk-utils.c gtk-utils.h
+
+TESTPROGRAMS_GTK = \
+ clip-test \
+ clip-in \
+ composite-test \
+ gradient-test \
+ alpha-test \
+ screen-test \
+ convolution-test \
+ trap-test
+
+INCLUDES += $(GTK_CFLAGS)
+
+gradient_test_LDADD = $(GTK_LDADD)
+gradient_test_SOURCES = gradient-test.c $(GTK_UTILS)
+
+alpha_test_LDADD = $(GTK_LDADD)
+alpha_test_SOURCES = alpha-test.c $(GTK_UTILS)
+
+composite_test_LDADD = $(GTK_LDADD)
+composite_test_SOURCES = composite-test.c $(GTK_UTILS)
+
+clip_test_LDADD = $(GTK_LDADD)
+clip_test_SOURCES = clip-test.c $(GTK_UTILS)
+
+clip_in_LDADD = $(GTK_LDADD)
+clip_in_SOURCES = clip-in.c $(GTK_UTILS)
+
+trap_test_LDADD = $(GTK_LDADD)
+trap_test_SOURCES = trap-test.c $(GTK_UTILS)
+
+screen_test_LDADD = $(GTK_LDADD)
+screen_test_SOURCES = screen-test.c $(GTK_UTILS)
+
+convolution_test_LDADD = $(GTK_LDADD)
+convolution_test_SOURCES = convolution-test.c $(GTK_UTILS)
+
+endif
+
+noinst_PROGRAMS = $(TESTPROGRAMS) $(TESTPROGRAMS_GTK)
+
+TESTS = $(TESTPROGRAMS)
+
diff --git a/pixman/test/Makefile.in b/pixman/test/Makefile.in deleted file mode 100644 index 8d2292ac8..000000000 --- a/pixman/test/Makefile.in +++ /dev/null @@ -1,829 +0,0 @@ -# Makefile.in generated by automake 1.11.1 from Makefile.am. -# @configure_input@ - -# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, -# 2003, 2004, 2005, 2006, 2007, 2008, 2009 Free Software Foundation, -# Inc. -# This Makefile.in is free software; the Free Software Foundation -# gives unlimited permission to copy and/or distribute it, -# with or without modifications, as long as this notice is preserved. - -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY, to the extent permitted by law; without -# even the implied warranty of MERCHANTABILITY or FITNESS FOR A -# PARTICULAR PURPOSE. - -@SET_MAKE@ - -VPATH = @srcdir@ -pkgdatadir = $(datadir)/@PACKAGE@ -pkgincludedir = $(includedir)/@PACKAGE@ -pkglibdir = $(libdir)/@PACKAGE@ -pkglibexecdir = $(libexecdir)/@PACKAGE@ -am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd -install_sh_DATA = $(install_sh) -c -m 644 -install_sh_PROGRAM = $(install_sh) -c -install_sh_SCRIPT = $(install_sh) -c -INSTALL_HEADER = $(INSTALL_DATA) -transform = $(program_transform_name) -NORMAL_INSTALL = : -PRE_INSTALL = : -POST_INSTALL = : -NORMAL_UNINSTALL = : -PRE_UNINSTALL = : -POST_UNINSTALL = : -build_triplet = @build@ -host_triplet = @host@ -@HAVE_GTK_TRUE@am__append_1 = $(GTK_CFLAGS) -noinst_PROGRAMS = $(am__EXEEXT_1) $(am__EXEEXT_2) -TESTS = $(am__EXEEXT_1) -subdir = test -DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in -ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 -am__aclocal_m4_deps = $(top_srcdir)/configure.ac -am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ - $(ACLOCAL_M4) -mkinstalldirs = $(install_sh) -d -CONFIG_HEADER = $(top_builddir)/config.h -CONFIG_CLEAN_FILES = -CONFIG_CLEAN_VPATH_FILES = -am__EXEEXT_1 = a1-trap-test$(EXEEXT) region-test$(EXEEXT) \ - fetch-test$(EXEEXT) oob-test$(EXEEXT) window-test$(EXEEXT) \ - trap-crasher$(EXEEXT) alphamap$(EXEEXT) blitters-test$(EXEEXT) \ - scaling-test$(EXEEXT) composite$(EXEEXT) -@HAVE_GTK_TRUE@am__EXEEXT_2 = clip-test$(EXEEXT) clip-in$(EXEEXT) \ -@HAVE_GTK_TRUE@ composite-test$(EXEEXT) gradient-test$(EXEEXT) \ -@HAVE_GTK_TRUE@ alpha-test$(EXEEXT) screen-test$(EXEEXT) \ -@HAVE_GTK_TRUE@ convolution-test$(EXEEXT) trap-test$(EXEEXT) \ -@HAVE_GTK_TRUE@ alphamap$(EXEEXT) -PROGRAMS = $(noinst_PROGRAMS) -a1_trap_test_SOURCES = a1-trap-test.c -a1_trap_test_OBJECTS = a1-trap-test.$(OBJEXT) -a1_trap_test_DEPENDENCIES = $(TEST_LDADD) -AM_V_lt = $(am__v_lt_$(V)) -am__v_lt_ = $(am__v_lt_$(AM_DEFAULT_VERBOSITY)) -am__v_lt_0 = --silent -am__alpha_test_SOURCES_DIST = alpha-test.c gtk-utils.c gtk-utils.h -@HAVE_GTK_TRUE@am__objects_1 = gtk-utils.$(OBJEXT) -@HAVE_GTK_TRUE@am_alpha_test_OBJECTS = alpha-test.$(OBJEXT) \ -@HAVE_GTK_TRUE@ $(am__objects_1) -alpha_test_OBJECTS = $(am_alpha_test_OBJECTS) -am__DEPENDENCIES_1 = -@HAVE_GTK_TRUE@am__DEPENDENCIES_2 = $(TEST_LDADD) \ -@HAVE_GTK_TRUE@ $(am__DEPENDENCIES_1) -@HAVE_GTK_TRUE@alpha_test_DEPENDENCIES = $(am__DEPENDENCIES_2) -am_alphamap_OBJECTS = alphamap.$(OBJEXT) utils.$(OBJEXT) -alphamap_OBJECTS = $(am_alphamap_OBJECTS) -alphamap_DEPENDENCIES = $(TEST_LDADD) -am_blitters_test_OBJECTS = blitters-test.$(OBJEXT) utils.$(OBJEXT) -blitters_test_OBJECTS = $(am_blitters_test_OBJECTS) -blitters_test_DEPENDENCIES = $(TEST_LDADD) -am__clip_in_SOURCES_DIST = clip-in.c gtk-utils.c gtk-utils.h -@HAVE_GTK_TRUE@am_clip_in_OBJECTS = clip-in.$(OBJEXT) $(am__objects_1) -clip_in_OBJECTS = $(am_clip_in_OBJECTS) -@HAVE_GTK_TRUE@clip_in_DEPENDENCIES = $(am__DEPENDENCIES_2) -am__clip_test_SOURCES_DIST = clip-test.c gtk-utils.c gtk-utils.h -@HAVE_GTK_TRUE@am_clip_test_OBJECTS = clip-test.$(OBJEXT) \ -@HAVE_GTK_TRUE@ $(am__objects_1) -clip_test_OBJECTS = $(am_clip_test_OBJECTS) -@HAVE_GTK_TRUE@clip_test_DEPENDENCIES = $(am__DEPENDENCIES_2) -composite_SOURCES = composite.c -composite_OBJECTS = composite.$(OBJEXT) -composite_DEPENDENCIES = $(TEST_LDADD) -am__composite_test_SOURCES_DIST = composite-test.c gtk-utils.c \ - gtk-utils.h -@HAVE_GTK_TRUE@am_composite_test_OBJECTS = composite-test.$(OBJEXT) \ -@HAVE_GTK_TRUE@ $(am__objects_1) -composite_test_OBJECTS = $(am_composite_test_OBJECTS) -@HAVE_GTK_TRUE@composite_test_DEPENDENCIES = $(am__DEPENDENCIES_2) -am__convolution_test_SOURCES_DIST = convolution-test.c gtk-utils.c \ - gtk-utils.h -@HAVE_GTK_TRUE@am_convolution_test_OBJECTS = \ -@HAVE_GTK_TRUE@ convolution-test.$(OBJEXT) $(am__objects_1) -convolution_test_OBJECTS = $(am_convolution_test_OBJECTS) -@HAVE_GTK_TRUE@convolution_test_DEPENDENCIES = $(am__DEPENDENCIES_2) -fetch_test_SOURCES = fetch-test.c -fetch_test_OBJECTS = fetch-test.$(OBJEXT) -fetch_test_DEPENDENCIES = $(TEST_LDADD) -am__gradient_test_SOURCES_DIST = gradient-test.c gtk-utils.c \ - gtk-utils.h -@HAVE_GTK_TRUE@am_gradient_test_OBJECTS = gradient-test.$(OBJEXT) \ -@HAVE_GTK_TRUE@ $(am__objects_1) -gradient_test_OBJECTS = $(am_gradient_test_OBJECTS) -@HAVE_GTK_TRUE@gradient_test_DEPENDENCIES = $(am__DEPENDENCIES_2) -oob_test_SOURCES = oob-test.c -oob_test_OBJECTS = oob-test.$(OBJEXT) -oob_test_DEPENDENCIES = $(TEST_LDADD) -am_region_test_OBJECTS = region-test.$(OBJEXT) utils.$(OBJEXT) -region_test_OBJECTS = $(am_region_test_OBJECTS) -region_test_DEPENDENCIES = $(TEST_LDADD) -am_scaling_test_OBJECTS = scaling-test.$(OBJEXT) utils.$(OBJEXT) -scaling_test_OBJECTS = $(am_scaling_test_OBJECTS) -scaling_test_DEPENDENCIES = $(TEST_LDADD) -am__screen_test_SOURCES_DIST = screen-test.c gtk-utils.c gtk-utils.h -@HAVE_GTK_TRUE@am_screen_test_OBJECTS = screen-test.$(OBJEXT) \ -@HAVE_GTK_TRUE@ $(am__objects_1) -screen_test_OBJECTS = $(am_screen_test_OBJECTS) -@HAVE_GTK_TRUE@screen_test_DEPENDENCIES = $(am__DEPENDENCIES_2) -trap_crasher_SOURCES = trap-crasher.c -trap_crasher_OBJECTS = trap-crasher.$(OBJEXT) -trap_crasher_DEPENDENCIES = $(TEST_LDADD) -am__trap_test_SOURCES_DIST = trap-test.c gtk-utils.c gtk-utils.h -@HAVE_GTK_TRUE@am_trap_test_OBJECTS = trap-test.$(OBJEXT) \ -@HAVE_GTK_TRUE@ $(am__objects_1) -trap_test_OBJECTS = $(am_trap_test_OBJECTS) -@HAVE_GTK_TRUE@trap_test_DEPENDENCIES = $(am__DEPENDENCIES_2) -window_test_SOURCES = window-test.c -window_test_OBJECTS = window-test.$(OBJEXT) -window_test_DEPENDENCIES = $(TEST_LDADD) -DEFAULT_INCLUDES = -I.@am__isrc@ -I$(top_builddir) -depcomp = $(SHELL) $(top_srcdir)/depcomp -am__depfiles_maybe = depfiles -am__mv = mv -f -COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \ - $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -LTCOMPILE = $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) \ - $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) \ - $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) \ - $(AM_CFLAGS) $(CFLAGS) -AM_V_CC = $(am__v_CC_$(V)) -am__v_CC_ = $(am__v_CC_$(AM_DEFAULT_VERBOSITY)) -am__v_CC_0 = @echo " CC " $@; -AM_V_at = $(am__v_at_$(V)) -am__v_at_ = $(am__v_at_$(AM_DEFAULT_VERBOSITY)) -am__v_at_0 = @ -CCLD = $(CC) -LINK = $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) \ - $(LIBTOOLFLAGS) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \ - $(AM_LDFLAGS) $(LDFLAGS) -o $@ -AM_V_CCLD = $(am__v_CCLD_$(V)) -am__v_CCLD_ = $(am__v_CCLD_$(AM_DEFAULT_VERBOSITY)) -am__v_CCLD_0 = @echo " CCLD " $@; -AM_V_GEN = $(am__v_GEN_$(V)) -am__v_GEN_ = $(am__v_GEN_$(AM_DEFAULT_VERBOSITY)) -am__v_GEN_0 = @echo " GEN " $@; -SOURCES = a1-trap-test.c $(alpha_test_SOURCES) $(alphamap_SOURCES) \ - $(blitters_test_SOURCES) $(clip_in_SOURCES) \ - $(clip_test_SOURCES) composite.c $(composite_test_SOURCES) \ - $(convolution_test_SOURCES) fetch-test.c \ - $(gradient_test_SOURCES) oob-test.c $(region_test_SOURCES) \ - $(scaling_test_SOURCES) $(screen_test_SOURCES) trap-crasher.c \ - $(trap_test_SOURCES) window-test.c -DIST_SOURCES = a1-trap-test.c $(am__alpha_test_SOURCES_DIST) \ - $(alphamap_SOURCES) $(blitters_test_SOURCES) \ - $(am__clip_in_SOURCES_DIST) $(am__clip_test_SOURCES_DIST) \ - composite.c $(am__composite_test_SOURCES_DIST) \ - $(am__convolution_test_SOURCES_DIST) fetch-test.c \ - $(am__gradient_test_SOURCES_DIST) oob-test.c \ - $(region_test_SOURCES) $(scaling_test_SOURCES) \ - $(am__screen_test_SOURCES_DIST) trap-crasher.c \ - $(am__trap_test_SOURCES_DIST) window-test.c -ETAGS = etags -CTAGS = ctags -am__tty_colors = \ -red=; grn=; lgn=; blu=; std= -DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) -ACLOCAL = @ACLOCAL@ -AMTAR = @AMTAR@ -AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@ -AR = @AR@ -AUTOCONF = @AUTOCONF@ -AUTOHEADER = @AUTOHEADER@ -AUTOMAKE = @AUTOMAKE@ -AWK = @AWK@ -CC = @CC@ -CCAS = @CCAS@ -CCASDEPMODE = @CCASDEPMODE@ -CCASFLAGS = @CCASFLAGS@ -CCDEPMODE = @CCDEPMODE@ -CFLAGS = @CFLAGS@ -CPP = @CPP@ -CPPFLAGS = @CPPFLAGS@ -CYGPATH_W = @CYGPATH_W@ -DEFS = @DEFS@ -DEPDIR = @DEPDIR@ -DEP_CFLAGS = @DEP_CFLAGS@ -DEP_LIBS = @DEP_LIBS@ -DSYMUTIL = @DSYMUTIL@ -DUMPBIN = @DUMPBIN@ -ECHO_C = @ECHO_C@ -ECHO_N = @ECHO_N@ -ECHO_T = @ECHO_T@ -EGREP = @EGREP@ -EXEEXT = @EXEEXT@ -FGREP = @FGREP@ -GREP = @GREP@ -GTK_CFLAGS = @GTK_CFLAGS@ -GTK_LIBS = @GTK_LIBS@ -HAVE_PTHREAD_SETSPECIFIC = @HAVE_PTHREAD_SETSPECIFIC@ -INSTALL = @INSTALL@ -INSTALL_DATA = @INSTALL_DATA@ -INSTALL_PROGRAM = @INSTALL_PROGRAM@ -INSTALL_SCRIPT = @INSTALL_SCRIPT@ -INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ -LD = @LD@ -LDFLAGS = @LDFLAGS@ -LIBOBJS = @LIBOBJS@ -LIBS = @LIBS@ -LIBTOOL = @LIBTOOL@ -LIPO = @LIPO@ -LN_S = @LN_S@ -LTLIBOBJS = @LTLIBOBJS@ -LT_VERSION_INFO = @LT_VERSION_INFO@ -MAKEINFO = @MAKEINFO@ -MKDIR_P = @MKDIR_P@ -MMX_CFLAGS = @MMX_CFLAGS@ -MMX_LDFLAGS = @MMX_LDFLAGS@ -NM = @NM@ -NMEDIT = @NMEDIT@ -OBJDUMP = @OBJDUMP@ -OBJEXT = @OBJEXT@ -OTOOL = @OTOOL@ -OTOOL64 = @OTOOL64@ -PACKAGE = @PACKAGE@ -PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ -PACKAGE_NAME = @PACKAGE_NAME@ -PACKAGE_STRING = @PACKAGE_STRING@ -PACKAGE_TARNAME = @PACKAGE_TARNAME@ -PACKAGE_URL = @PACKAGE_URL@ -PACKAGE_VERSION = @PACKAGE_VERSION@ -PATH_SEPARATOR = @PATH_SEPARATOR@ -PERL = @PERL@ -PIXMAN_TIMERS = @PIXMAN_TIMERS@ -PIXMAN_VERSION_MAJOR = @PIXMAN_VERSION_MAJOR@ -PIXMAN_VERSION_MICRO = @PIXMAN_VERSION_MICRO@ -PIXMAN_VERSION_MINOR = @PIXMAN_VERSION_MINOR@ -PKG_CONFIG = @PKG_CONFIG@ -PTHREAD_LDFLAGS = @PTHREAD_LDFLAGS@ -RANLIB = @RANLIB@ -SED = @SED@ -SET_MAKE = @SET_MAKE@ -SHELL = @SHELL@ -SSE2_CFLAGS = @SSE2_CFLAGS@ -SSE2_LDFLAGS = @SSE2_LDFLAGS@ -STRIP = @STRIP@ -TOOLCHAIN_SUPPORTS__THREAD = @TOOLCHAIN_SUPPORTS__THREAD@ -VERSION = @VERSION@ -VMX_CFLAGS = @VMX_CFLAGS@ -abs_builddir = @abs_builddir@ -abs_srcdir = @abs_srcdir@ -abs_top_builddir = @abs_top_builddir@ -abs_top_srcdir = @abs_top_srcdir@ -ac_ct_CC = @ac_ct_CC@ -ac_ct_DUMPBIN = @ac_ct_DUMPBIN@ -am__include = @am__include@ -am__leading_dot = @am__leading_dot@ -am__quote = @am__quote@ -am__tar = @am__tar@ -am__untar = @am__untar@ -bindir = @bindir@ -build = @build@ -build_alias = @build_alias@ -build_cpu = @build_cpu@ -build_os = @build_os@ -build_vendor = @build_vendor@ -builddir = @builddir@ -datadir = @datadir@ -datarootdir = @datarootdir@ -docdir = @docdir@ -dvidir = @dvidir@ -exec_prefix = @exec_prefix@ -host = @host@ -host_alias = @host_alias@ -host_cpu = @host_cpu@ -host_os = @host_os@ -host_vendor = @host_vendor@ -htmldir = @htmldir@ -includedir = @includedir@ -infodir = @infodir@ -install_sh = @install_sh@ -libdir = @libdir@ -libexecdir = @libexecdir@ -localedir = @localedir@ -localstatedir = @localstatedir@ -lt_ECHO = @lt_ECHO@ -mandir = @mandir@ -mkdir_p = @mkdir_p@ -oldincludedir = @oldincludedir@ -pdfdir = @pdfdir@ -prefix = @prefix@ -program_transform_name = @program_transform_name@ -psdir = @psdir@ -sbindir = @sbindir@ -sharedstatedir = @sharedstatedir@ -srcdir = @srcdir@ -sysconfdir = @sysconfdir@ -target_alias = @target_alias@ -top_build_prefix = @top_build_prefix@ -top_builddir = @top_builddir@ -top_srcdir = @top_srcdir@ -TEST_LDADD = $(top_builddir)/pixman/libpixman-1.la -INCLUDES = -I$(top_srcdir)/pixman -I$(top_builddir)/pixman \ - $(am__append_1) -TESTPROGRAMS = \ - a1-trap-test \ - region-test \ - fetch-test \ - oob-test \ - window-test \ - trap-crasher \ - alphamap \ - blitters-test \ - scaling-test \ - composite - -a1_trap_test_LDADD = $(TEST_LDADD) -fetch_test_LDADD = $(TEST_LDADD) -composite_LDADD = $(TEST_LDADD) -trap_crasher_LDADD = $(TEST_LDADD) -oob_test_LDADD = $(TEST_LDADD) -window_test_LDADD = $(TEST_LDADD) -region_test_LDADD = $(TEST_LDADD) -region_test_SOURCES = region-test.c utils.c utils.h -blitters_test_LDADD = $(TEST_LDADD) -blitters_test_SOURCES = blitters-test.c utils.c utils.h -scaling_test_LDADD = $(TEST_LDADD) -scaling_test_SOURCES = scaling-test.c utils.c utils.h -alphamap_LDADD = $(TEST_LDADD) -alphamap_SOURCES = alphamap.c utils.c utils.h - -# GTK using test programs -@HAVE_GTK_TRUE@GTK_LDADD = $(TEST_LDADD) $(GTK_LIBS) -@HAVE_GTK_TRUE@GTK_UTILS = gtk-utils.c gtk-utils.h -@HAVE_GTK_TRUE@TESTPROGRAMS_GTK = \ -@HAVE_GTK_TRUE@ clip-test \ -@HAVE_GTK_TRUE@ clip-in \ -@HAVE_GTK_TRUE@ composite-test \ -@HAVE_GTK_TRUE@ gradient-test \ -@HAVE_GTK_TRUE@ alpha-test \ -@HAVE_GTK_TRUE@ screen-test \ -@HAVE_GTK_TRUE@ convolution-test \ -@HAVE_GTK_TRUE@ trap-test \ -@HAVE_GTK_TRUE@ alphamap - -@HAVE_GTK_TRUE@gradient_test_LDADD = $(GTK_LDADD) -@HAVE_GTK_TRUE@gradient_test_SOURCES = gradient-test.c $(GTK_UTILS) -@HAVE_GTK_TRUE@alpha_test_LDADD = $(GTK_LDADD) -@HAVE_GTK_TRUE@alpha_test_SOURCES = alpha-test.c $(GTK_UTILS) -@HAVE_GTK_TRUE@composite_test_LDADD = $(GTK_LDADD) -@HAVE_GTK_TRUE@composite_test_SOURCES = composite-test.c $(GTK_UTILS) -@HAVE_GTK_TRUE@clip_test_LDADD = $(GTK_LDADD) -@HAVE_GTK_TRUE@clip_test_SOURCES = clip-test.c $(GTK_UTILS) -@HAVE_GTK_TRUE@clip_in_LDADD = $(GTK_LDADD) -@HAVE_GTK_TRUE@clip_in_SOURCES = clip-in.c $(GTK_UTILS) -@HAVE_GTK_TRUE@trap_test_LDADD = $(GTK_LDADD) -@HAVE_GTK_TRUE@trap_test_SOURCES = trap-test.c $(GTK_UTILS) -@HAVE_GTK_TRUE@screen_test_LDADD = $(GTK_LDADD) -@HAVE_GTK_TRUE@screen_test_SOURCES = screen-test.c $(GTK_UTILS) -@HAVE_GTK_TRUE@convolution_test_LDADD = $(GTK_LDADD) -@HAVE_GTK_TRUE@convolution_test_SOURCES = convolution-test.c $(GTK_UTILS) -all: all-am - -.SUFFIXES: -.SUFFIXES: .c .lo .o .obj -$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps) - @for dep in $?; do \ - case '$(am__configure_deps)' in \ - *$$dep*) \ - ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \ - && { if test -f $@; then exit 0; else break; fi; }; \ - exit 1;; \ - esac; \ - done; \ - echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign test/Makefile'; \ - $(am__cd) $(top_srcdir) && \ - $(AUTOMAKE) --foreign test/Makefile -.PRECIOUS: Makefile -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status - @case '$?' in \ - *config.status*) \ - cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \ - *) \ - echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \ - cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \ - esac; - -$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) - cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh - -$(top_srcdir)/configure: $(am__configure_deps) - cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh -$(ACLOCAL_M4): $(am__aclocal_m4_deps) - cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh -$(am__aclocal_m4_deps): - -clean-noinstPROGRAMS: - @list='$(noinst_PROGRAMS)'; test -n "$$list" || exit 0; \ - echo " rm -f" $$list; \ - rm -f $$list || exit $$?; \ - test -n "$(EXEEXT)" || exit 0; \ - list=`for p in $$list; do echo "$$p"; done | sed 's/$(EXEEXT)$$//'`; \ - echo " rm -f" $$list; \ - rm -f $$list -a1-trap-test$(EXEEXT): $(a1_trap_test_OBJECTS) $(a1_trap_test_DEPENDENCIES) - @rm -f a1-trap-test$(EXEEXT) - $(AM_V_CCLD)$(LINK) $(a1_trap_test_OBJECTS) $(a1_trap_test_LDADD) $(LIBS) -alpha-test$(EXEEXT): $(alpha_test_OBJECTS) $(alpha_test_DEPENDENCIES) - @rm -f alpha-test$(EXEEXT) - $(AM_V_CCLD)$(LINK) $(alpha_test_OBJECTS) $(alpha_test_LDADD) $(LIBS) -alphamap$(EXEEXT): $(alphamap_OBJECTS) $(alphamap_DEPENDENCIES) - @rm -f alphamap$(EXEEXT) - $(AM_V_CCLD)$(LINK) $(alphamap_OBJECTS) $(alphamap_LDADD) $(LIBS) -blitters-test$(EXEEXT): $(blitters_test_OBJECTS) $(blitters_test_DEPENDENCIES) - @rm -f blitters-test$(EXEEXT) - $(AM_V_CCLD)$(LINK) $(blitters_test_OBJECTS) $(blitters_test_LDADD) $(LIBS) -clip-in$(EXEEXT): $(clip_in_OBJECTS) $(clip_in_DEPENDENCIES) - @rm -f clip-in$(EXEEXT) - $(AM_V_CCLD)$(LINK) $(clip_in_OBJECTS) $(clip_in_LDADD) $(LIBS) -clip-test$(EXEEXT): $(clip_test_OBJECTS) $(clip_test_DEPENDENCIES) - @rm -f clip-test$(EXEEXT) - $(AM_V_CCLD)$(LINK) $(clip_test_OBJECTS) $(clip_test_LDADD) $(LIBS) -composite$(EXEEXT): $(composite_OBJECTS) $(composite_DEPENDENCIES) - @rm -f composite$(EXEEXT) - $(AM_V_CCLD)$(LINK) $(composite_OBJECTS) $(composite_LDADD) $(LIBS) -composite-test$(EXEEXT): $(composite_test_OBJECTS) $(composite_test_DEPENDENCIES) - @rm -f composite-test$(EXEEXT) - $(AM_V_CCLD)$(LINK) $(composite_test_OBJECTS) $(composite_test_LDADD) $(LIBS) -convolution-test$(EXEEXT): $(convolution_test_OBJECTS) $(convolution_test_DEPENDENCIES) - @rm -f convolution-test$(EXEEXT) - $(AM_V_CCLD)$(LINK) $(convolution_test_OBJECTS) $(convolution_test_LDADD) $(LIBS) -fetch-test$(EXEEXT): $(fetch_test_OBJECTS) $(fetch_test_DEPENDENCIES) - @rm -f fetch-test$(EXEEXT) - $(AM_V_CCLD)$(LINK) $(fetch_test_OBJECTS) $(fetch_test_LDADD) $(LIBS) -gradient-test$(EXEEXT): $(gradient_test_OBJECTS) $(gradient_test_DEPENDENCIES) - @rm -f gradient-test$(EXEEXT) - $(AM_V_CCLD)$(LINK) $(gradient_test_OBJECTS) $(gradient_test_LDADD) $(LIBS) -oob-test$(EXEEXT): $(oob_test_OBJECTS) $(oob_test_DEPENDENCIES) - @rm -f oob-test$(EXEEXT) - $(AM_V_CCLD)$(LINK) $(oob_test_OBJECTS) $(oob_test_LDADD) $(LIBS) -region-test$(EXEEXT): $(region_test_OBJECTS) $(region_test_DEPENDENCIES) - @rm -f region-test$(EXEEXT) - $(AM_V_CCLD)$(LINK) $(region_test_OBJECTS) $(region_test_LDADD) $(LIBS) -scaling-test$(EXEEXT): $(scaling_test_OBJECTS) $(scaling_test_DEPENDENCIES) - @rm -f scaling-test$(EXEEXT) - $(AM_V_CCLD)$(LINK) $(scaling_test_OBJECTS) $(scaling_test_LDADD) $(LIBS) -screen-test$(EXEEXT): $(screen_test_OBJECTS) $(screen_test_DEPENDENCIES) - @rm -f screen-test$(EXEEXT) - $(AM_V_CCLD)$(LINK) $(screen_test_OBJECTS) $(screen_test_LDADD) $(LIBS) -trap-crasher$(EXEEXT): $(trap_crasher_OBJECTS) $(trap_crasher_DEPENDENCIES) - @rm -f trap-crasher$(EXEEXT) - $(AM_V_CCLD)$(LINK) $(trap_crasher_OBJECTS) $(trap_crasher_LDADD) $(LIBS) -trap-test$(EXEEXT): $(trap_test_OBJECTS) $(trap_test_DEPENDENCIES) - @rm -f trap-test$(EXEEXT) - $(AM_V_CCLD)$(LINK) $(trap_test_OBJECTS) $(trap_test_LDADD) $(LIBS) -window-test$(EXEEXT): $(window_test_OBJECTS) $(window_test_DEPENDENCIES) - @rm -f window-test$(EXEEXT) - $(AM_V_CCLD)$(LINK) $(window_test_OBJECTS) $(window_test_LDADD) $(LIBS) - -mostlyclean-compile: - -rm -f *.$(OBJEXT) - -distclean-compile: - -rm -f *.tab.c - -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/a1-trap-test.Po@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/alpha-test.Po@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/alphamap.Po@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/blitters-test.Po@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/clip-in.Po@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/clip-test.Po@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/composite-test.Po@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/composite.Po@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/convolution-test.Po@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/fetch-test.Po@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/gradient-test.Po@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/gtk-utils.Po@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/oob-test.Po@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/region-test.Po@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/scaling-test.Po@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/screen-test.Po@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/trap-crasher.Po@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/trap-test.Po@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/utils.Po@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/window-test.Po@am__quote@ - -.c.o: -@am__fastdepCC_TRUE@ $(AM_V_CC)$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $< -@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po -@am__fastdepCC_FALSE@ $(AM_V_CC) @AM_BACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(COMPILE) -c $< - -.c.obj: -@am__fastdepCC_TRUE@ $(AM_V_CC)$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'` -@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po -@am__fastdepCC_FALSE@ $(AM_V_CC) @AM_BACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(COMPILE) -c `$(CYGPATH_W) '$<'` - -.c.lo: -@am__fastdepCC_TRUE@ $(AM_V_CC)$(LTCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $< -@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo -@am__fastdepCC_FALSE@ $(AM_V_CC) @AM_BACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(LTCOMPILE) -c -o $@ $< - -mostlyclean-libtool: - -rm -f *.lo - -clean-libtool: - -rm -rf .libs _libs - -ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES) - list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ - unique=`for i in $$list; do \ - if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ - done | \ - $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ - END { if (nonempty) { for (i in files) print i; }; }'`; \ - mkid -fID $$unique -tags: TAGS - -TAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ - $(TAGS_FILES) $(LISP) - set x; \ - here=`pwd`; \ - list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ - unique=`for i in $$list; do \ - if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ - done | \ - $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ - END { if (nonempty) { for (i in files) print i; }; }'`; \ - shift; \ - if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \ - test -n "$$unique" || unique=$$empty_fix; \ - if test $$# -gt 0; then \ - $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ - "$$@" $$unique; \ - else \ - $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ - $$unique; \ - fi; \ - fi -ctags: CTAGS -CTAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ - $(TAGS_FILES) $(LISP) - list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ - unique=`for i in $$list; do \ - if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ - done | \ - $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ - END { if (nonempty) { for (i in files) print i; }; }'`; \ - test -z "$(CTAGS_ARGS)$$unique" \ - || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \ - $$unique - -GTAGS: - here=`$(am__cd) $(top_builddir) && pwd` \ - && $(am__cd) $(top_srcdir) \ - && gtags -i $(GTAGS_ARGS) "$$here" - -distclean-tags: - -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags - -check-TESTS: $(TESTS) - @failed=0; all=0; xfail=0; xpass=0; skip=0; \ - srcdir=$(srcdir); export srcdir; \ - list=' $(TESTS) '; \ - $(am__tty_colors); \ - if test -n "$$list"; then \ - for tst in $$list; do \ - if test -f ./$$tst; then dir=./; \ - elif test -f $$tst; then dir=; \ - else dir="$(srcdir)/"; fi; \ - if $(TESTS_ENVIRONMENT) $${dir}$$tst; then \ - all=`expr $$all + 1`; \ - case " $(XFAIL_TESTS) " in \ - *[\ \ ]$$tst[\ \ ]*) \ - xpass=`expr $$xpass + 1`; \ - failed=`expr $$failed + 1`; \ - col=$$red; res=XPASS; \ - ;; \ - *) \ - col=$$grn; res=PASS; \ - ;; \ - esac; \ - elif test $$? -ne 77; then \ - all=`expr $$all + 1`; \ - case " $(XFAIL_TESTS) " in \ - *[\ \ ]$$tst[\ \ ]*) \ - xfail=`expr $$xfail + 1`; \ - col=$$lgn; res=XFAIL; \ - ;; \ - *) \ - failed=`expr $$failed + 1`; \ - col=$$red; res=FAIL; \ - ;; \ - esac; \ - else \ - skip=`expr $$skip + 1`; \ - col=$$blu; res=SKIP; \ - fi; \ - echo "$${col}$$res$${std}: $$tst"; \ - done; \ - if test "$$all" -eq 1; then \ - tests="test"; \ - All=""; \ - else \ - tests="tests"; \ - All="All "; \ - fi; \ - if test "$$failed" -eq 0; then \ - if test "$$xfail" -eq 0; then \ - banner="$$All$$all $$tests passed"; \ - else \ - if test "$$xfail" -eq 1; then failures=failure; else failures=failures; fi; \ - banner="$$All$$all $$tests behaved as expected ($$xfail expected $$failures)"; \ - fi; \ - else \ - if test "$$xpass" -eq 0; then \ - banner="$$failed of $$all $$tests failed"; \ - else \ - if test "$$xpass" -eq 1; then passes=pass; else passes=passes; fi; \ - banner="$$failed of $$all $$tests did not behave as expected ($$xpass unexpected $$passes)"; \ - fi; \ - fi; \ - dashes="$$banner"; \ - skipped=""; \ - if test "$$skip" -ne 0; then \ - if test "$$skip" -eq 1; then \ - skipped="($$skip test was not run)"; \ - else \ - skipped="($$skip tests were not run)"; \ - fi; \ - test `echo "$$skipped" | wc -c` -le `echo "$$banner" | wc -c` || \ - dashes="$$skipped"; \ - fi; \ - report=""; \ - if test "$$failed" -ne 0 && test -n "$(PACKAGE_BUGREPORT)"; then \ - report="Please report to $(PACKAGE_BUGREPORT)"; \ - test `echo "$$report" | wc -c` -le `echo "$$banner" | wc -c` || \ - dashes="$$report"; \ - fi; \ - dashes=`echo "$$dashes" | sed s/./=/g`; \ - if test "$$failed" -eq 0; then \ - echo "$$grn$$dashes"; \ - else \ - echo "$$red$$dashes"; \ - fi; \ - echo "$$banner"; \ - test -z "$$skipped" || echo "$$skipped"; \ - test -z "$$report" || echo "$$report"; \ - echo "$$dashes$$std"; \ - test "$$failed" -eq 0; \ - else :; fi - -distdir: $(DISTFILES) - @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ - topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ - list='$(DISTFILES)'; \ - dist_files=`for file in $$list; do echo $$file; done | \ - sed -e "s|^$$srcdirstrip/||;t" \ - -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ - case $$dist_files in \ - */*) $(MKDIR_P) `echo "$$dist_files" | \ - sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ - sort -u` ;; \ - esac; \ - for file in $$dist_files; do \ - if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ - if test -d $$d/$$file; then \ - dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ - if test -d "$(distdir)/$$file"; then \ - find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ - fi; \ - if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ - cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \ - find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ - fi; \ - cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \ - else \ - test -f "$(distdir)/$$file" \ - || cp -p $$d/$$file "$(distdir)/$$file" \ - || exit 1; \ - fi; \ - done -check-am: all-am - $(MAKE) $(AM_MAKEFLAGS) check-TESTS -check: check-am -all-am: Makefile $(PROGRAMS) -installdirs: -install: install-am -install-exec: install-exec-am -install-data: install-data-am -uninstall: uninstall-am - -install-am: all-am - @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am - -installcheck: installcheck-am -install-strip: - $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ - install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ - `test -z '$(STRIP)' || \ - echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install -mostlyclean-generic: - -clean-generic: - -distclean-generic: - -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) - -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES) - -maintainer-clean-generic: - @echo "This command is intended for maintainers to use" - @echo "it deletes files that may require special tools to rebuild." -clean: clean-am - -clean-am: clean-generic clean-libtool clean-noinstPROGRAMS \ - mostlyclean-am - -distclean: distclean-am - -rm -rf ./$(DEPDIR) - -rm -f Makefile -distclean-am: clean-am distclean-compile distclean-generic \ - distclean-tags - -dvi: dvi-am - -dvi-am: - -html: html-am - -html-am: - -info: info-am - -info-am: - -install-data-am: - -install-dvi: install-dvi-am - -install-dvi-am: - -install-exec-am: - -install-html: install-html-am - -install-html-am: - -install-info: install-info-am - -install-info-am: - -install-man: - -install-pdf: install-pdf-am - -install-pdf-am: - -install-ps: install-ps-am - -install-ps-am: - -installcheck-am: - -maintainer-clean: maintainer-clean-am - -rm -rf ./$(DEPDIR) - -rm -f Makefile -maintainer-clean-am: distclean-am maintainer-clean-generic - -mostlyclean: mostlyclean-am - -mostlyclean-am: mostlyclean-compile mostlyclean-generic \ - mostlyclean-libtool - -pdf: pdf-am - -pdf-am: - -ps: ps-am - -ps-am: - -uninstall-am: - -.MAKE: check-am install-am install-strip - -.PHONY: CTAGS GTAGS all all-am check check-TESTS check-am clean \ - clean-generic clean-libtool clean-noinstPROGRAMS ctags \ - distclean distclean-compile distclean-generic \ - distclean-libtool distclean-tags distdir dvi dvi-am html \ - html-am info info-am install install-am install-data \ - install-data-am install-dvi install-dvi-am install-exec \ - install-exec-am install-html install-html-am install-info \ - install-info-am install-man install-pdf install-pdf-am \ - install-ps install-ps-am install-strip installcheck \ - installcheck-am installdirs maintainer-clean \ - maintainer-clean-generic mostlyclean mostlyclean-compile \ - mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \ - tags uninstall uninstall-am - - -# Tell versions [3.59,3.63) of GNU make to not export all variables. -# Otherwise a system limit (for SysV at least) may be exceeded. -.NOEXPORT: diff --git a/pixman/test/blitters-test.c b/pixman/test/blitters-test.c index 18f871eae..1340e081a 100644 --- a/pixman/test/blitters-test.c +++ b/pixman/test/blitters-test.c @@ -1,497 +1,484 @@ -/* - * Test program, which stresses the use of different color formats and - * compositing operations. - * - * Just run it without any command line arguments, and it will report either - * "blitters test passed" - everything is ok - * "blitters test failed!" - there is some problem - * - * In the case of failure, finding the problem involves the following steps: - * 1. Get the reference 'blitters-test' binary. It makes sense to disable all - * the cpu specific optimizations in pixman and also configure it with - * '--disable-shared' option. Those who are paranoid can also tweak the - * sources to disable all fastpath functions. The resulting binary - * can be renamed to something like 'blitters-test.ref'. - * 2. Compile the buggy binary (also with the '--disable-shared' option). - * 3. Run 'ruby blitters-test-bisect.rb ./blitters-test.ref ./blitters-test' - * 4. Look at the information about failed case (destination buffer content - * will be shown) and try to figure out what is wrong. Loading - * test program in gdb, specifying failed test number in the command - * line with '-' character prepended and setting breakpoint on - * 'pixman_image_composite' function can provide detailed information - * about function arguments - */ -#include <assert.h> -#include <stdlib.h> -#include <stdio.h> -#include <config.h> -#include "utils.h" - -static pixman_indexed_t palette; - -static void * -aligned_malloc (size_t align, size_t size) -{ - void *result; - -#ifdef HAVE_POSIX_MEMALIGN - if (posix_memalign (&result, align, size) != 0) - result = NULL; -#else - result = malloc (size); -#endif - - return result; -} - -/* Create random image for testing purposes */ -static pixman_image_t * -create_random_image (pixman_format_code_t *allowed_formats, - int max_width, - int max_height, - int max_extra_stride, - pixman_format_code_t *used_fmt) -{ - int n = 0, i, width, height, stride; - pixman_format_code_t fmt; - uint32_t *buf; - pixman_image_t *img; - - while (allowed_formats[n] != -1) - n++; - fmt = allowed_formats[lcg_rand_n (n)]; - - width = lcg_rand_n (max_width) + 1; - height = lcg_rand_n (max_height) + 1; - stride = (width * PIXMAN_FORMAT_BPP (fmt) + 7) / 8 + - lcg_rand_n (max_extra_stride + 1); - stride = (stride + 3) & ~3; - - /* do the allocation */ - buf = aligned_malloc (64, stride * height); - - /* initialize image with random data */ - for (i = 0; i < stride * height; i++) - { - /* generation is biased to having more 0 or 255 bytes as - * they are more likely to be special-cased in code - */ - *((uint8_t *)buf + i) = lcg_rand_n (4) ? lcg_rand_n (256) : - (lcg_rand_n (2) ? 0 : 255); - } - - img = pixman_image_create_bits (fmt, width, height, buf, stride); - - if (PIXMAN_FORMAT_TYPE (fmt) == PIXMAN_TYPE_COLOR || - PIXMAN_FORMAT_TYPE (fmt) == PIXMAN_TYPE_GRAY) - { - pixman_image_set_indexed (img, &palette); - } - - image_endian_swap (img, PIXMAN_FORMAT_BPP (fmt)); - - if (used_fmt) *used_fmt = fmt; - return img; -} - -/* Free random image, and optionally update crc32 based on its data */ -static uint32_t -free_random_image (uint32_t initcrc, - pixman_image_t *img, - pixman_format_code_t fmt) -{ - uint32_t crc32 = 0; - int stride = pixman_image_get_stride (img); - uint32_t *data = pixman_image_get_data (img); - int height = pixman_image_get_height (img); - - if (fmt != -1) - { - /* mask unused 'x' part */ - if (PIXMAN_FORMAT_BPP (fmt) - PIXMAN_FORMAT_DEPTH (fmt) && - PIXMAN_FORMAT_DEPTH (fmt) != 0) - { - int i; - uint32_t *data = pixman_image_get_data (img); - uint32_t mask = (1 << PIXMAN_FORMAT_DEPTH (fmt)) - 1; - - if (PIXMAN_FORMAT_TYPE (fmt) == PIXMAN_TYPE_BGRA) - mask <<= (PIXMAN_FORMAT_BPP (fmt) - PIXMAN_FORMAT_DEPTH (fmt)); - - for (i = 0; i < 32; i++) - mask |= mask << (i * PIXMAN_FORMAT_BPP (fmt)); - - for (i = 0; i < stride * height / 4; i++) - data[i] &= mask; - } - - /* swap endiannes in order to provide identical results on both big - * and litte endian systems - */ - image_endian_swap (img, PIXMAN_FORMAT_BPP (fmt)); - crc32 = compute_crc32 (initcrc, data, stride * height); - } - - pixman_image_unref (img); - free (data); - - return crc32; -} - -static pixman_op_t op_list[] = { - PIXMAN_OP_SRC, - PIXMAN_OP_OVER, - PIXMAN_OP_ADD, - PIXMAN_OP_CLEAR, - PIXMAN_OP_SRC, - PIXMAN_OP_DST, - PIXMAN_OP_OVER, - PIXMAN_OP_OVER_REVERSE, - PIXMAN_OP_IN, - PIXMAN_OP_IN_REVERSE, - PIXMAN_OP_OUT, - PIXMAN_OP_OUT_REVERSE, - PIXMAN_OP_ATOP, - PIXMAN_OP_ATOP_REVERSE, - PIXMAN_OP_XOR, - PIXMAN_OP_ADD, - PIXMAN_OP_SATURATE, - PIXMAN_OP_DISJOINT_CLEAR, - PIXMAN_OP_DISJOINT_SRC, - PIXMAN_OP_DISJOINT_DST, - PIXMAN_OP_DISJOINT_OVER, - PIXMAN_OP_DISJOINT_OVER_REVERSE, - PIXMAN_OP_DISJOINT_IN, - PIXMAN_OP_DISJOINT_IN_REVERSE, - PIXMAN_OP_DISJOINT_OUT, - PIXMAN_OP_DISJOINT_OUT_REVERSE, - PIXMAN_OP_DISJOINT_ATOP, - PIXMAN_OP_DISJOINT_ATOP_REVERSE, - PIXMAN_OP_DISJOINT_XOR, - PIXMAN_OP_CONJOINT_CLEAR, - PIXMAN_OP_CONJOINT_SRC, - PIXMAN_OP_CONJOINT_DST, - PIXMAN_OP_CONJOINT_OVER, - PIXMAN_OP_CONJOINT_OVER_REVERSE, - PIXMAN_OP_CONJOINT_IN, - PIXMAN_OP_CONJOINT_IN_REVERSE, - PIXMAN_OP_CONJOINT_OUT, - PIXMAN_OP_CONJOINT_OUT_REVERSE, - PIXMAN_OP_CONJOINT_ATOP, - PIXMAN_OP_CONJOINT_ATOP_REVERSE, - PIXMAN_OP_CONJOINT_XOR, - PIXMAN_OP_MULTIPLY, - PIXMAN_OP_SCREEN, - PIXMAN_OP_OVERLAY, - PIXMAN_OP_DARKEN, - PIXMAN_OP_LIGHTEN, - PIXMAN_OP_COLOR_DODGE, - PIXMAN_OP_COLOR_BURN, - PIXMAN_OP_HARD_LIGHT, - PIXMAN_OP_DIFFERENCE, - PIXMAN_OP_EXCLUSION, -#if 0 /* these use floating point math and are not always bitexact on different platforms */ - PIXMAN_OP_SOFT_LIGHT, - PIXMAN_OP_HSL_HUE, - PIXMAN_OP_HSL_SATURATION, - PIXMAN_OP_HSL_COLOR, - PIXMAN_OP_HSL_LUMINOSITY, -#endif -}; - -static pixman_format_code_t img_fmt_list[] = { - PIXMAN_a8r8g8b8, - PIXMAN_x8r8g8b8, - PIXMAN_r5g6b5, - PIXMAN_r3g3b2, - PIXMAN_a8, - PIXMAN_a8b8g8r8, - PIXMAN_x8b8g8r8, - PIXMAN_b8g8r8a8, - PIXMAN_b8g8r8x8, - PIXMAN_r8g8b8, - PIXMAN_b8g8r8, - PIXMAN_r5g6b5, - PIXMAN_b5g6r5, - PIXMAN_x2r10g10b10, - PIXMAN_a2r10g10b10, - PIXMAN_x2b10g10r10, - PIXMAN_a2b10g10r10, - PIXMAN_a1r5g5b5, - PIXMAN_x1r5g5b5, - PIXMAN_a1b5g5r5, - PIXMAN_x1b5g5r5, - PIXMAN_a4r4g4b4, - PIXMAN_x4r4g4b4, - PIXMAN_a4b4g4r4, - PIXMAN_x4b4g4r4, - PIXMAN_a8, - PIXMAN_r3g3b2, - PIXMAN_b2g3r3, - PIXMAN_a2r2g2b2, - PIXMAN_a2b2g2r2, - PIXMAN_c8, - PIXMAN_g8, - PIXMAN_x4c4, - PIXMAN_x4g4, - PIXMAN_c4, - PIXMAN_g4, - PIXMAN_g1, - PIXMAN_x4a4, - PIXMAN_a4, - PIXMAN_r1g2b1, - PIXMAN_b1g2r1, - PIXMAN_a1r1g1b1, - PIXMAN_a1b1g1r1, - PIXMAN_a1, - -1 -}; - -static pixman_format_code_t mask_fmt_list[] = { - PIXMAN_a8r8g8b8, - PIXMAN_a8, - PIXMAN_a4, - PIXMAN_a1, - -1 -}; - - -/* - * Composite operation with pseudorandom images - */ -uint32_t -test_composite (uint32_t initcrc, int testnum, int verbose) -{ - int i; - pixman_image_t *src_img = NULL; - pixman_image_t *dst_img = NULL; - pixman_image_t *mask_img = NULL; - int src_width, src_height; - int dst_width, dst_height; - int src_stride, dst_stride; - int src_x, src_y; - int dst_x, dst_y; - int mask_x, mask_y; - int w, h; - int op; - pixman_format_code_t src_fmt, dst_fmt, mask_fmt; - uint32_t *dstbuf, *srcbuf, *maskbuf; - uint32_t crc32; - int max_width, max_height, max_extra_stride; - - max_width = max_height = 24 + testnum / 10000; - max_extra_stride = 4 + testnum / 1000000; - - if (max_width > 256) - max_width = 256; - - if (max_height > 16) - max_height = 16; - - if (max_extra_stride > 8) - max_extra_stride = 8; - - lcg_srand (testnum); - - op = op_list[lcg_rand_n (sizeof (op_list) / sizeof (op_list[0]))]; - - if (lcg_rand_n (8)) - { - /* normal image */ - src_img = create_random_image (img_fmt_list, max_width, max_height, - max_extra_stride, &src_fmt); - } - else - { - /* solid case */ - src_img = create_random_image (img_fmt_list, 1, 1, - max_extra_stride, &src_fmt); - - pixman_image_set_repeat (src_img, PIXMAN_REPEAT_NORMAL); - } - - dst_img = create_random_image (img_fmt_list, max_width, max_height, - max_extra_stride, &dst_fmt); - - src_width = pixman_image_get_width (src_img); - src_height = pixman_image_get_height (src_img); - src_stride = pixman_image_get_stride (src_img); - - dst_width = pixman_image_get_width (dst_img); - dst_height = pixman_image_get_height (dst_img); - dst_stride = pixman_image_get_stride (dst_img); - - dstbuf = pixman_image_get_data (dst_img); - srcbuf = pixman_image_get_data (src_img); - - src_x = lcg_rand_n (src_width); - src_y = lcg_rand_n (src_height); - dst_x = lcg_rand_n (dst_width); - dst_y = lcg_rand_n (dst_height); - - mask_img = NULL; - mask_fmt = -1; - mask_x = 0; - mask_y = 0; - maskbuf = NULL; - - if ((src_fmt == PIXMAN_x8r8g8b8 || src_fmt == PIXMAN_x8b8g8r8) && - (lcg_rand_n (4) == 0)) - { - /* PIXBUF */ - mask_fmt = lcg_rand_n (2) ? PIXMAN_a8r8g8b8 : PIXMAN_a8b8g8r8; - mask_img = pixman_image_create_bits (mask_fmt, - src_width, - src_height, - srcbuf, - src_stride); - mask_x = src_x; - mask_y = src_y; - maskbuf = srcbuf; - } - else if (lcg_rand_n (2)) - { - if (lcg_rand_n (2)) - { - mask_img = create_random_image (mask_fmt_list, max_width, max_height, - max_extra_stride, &mask_fmt); - } - else - { - /* solid case */ - mask_img = create_random_image (mask_fmt_list, 1, 1, - max_extra_stride, &mask_fmt); - pixman_image_set_repeat (mask_img, PIXMAN_REPEAT_NORMAL); - } - - if (lcg_rand_n (2)) - pixman_image_set_component_alpha (mask_img, 1); - - mask_x = lcg_rand_n (pixman_image_get_width (mask_img)); - mask_y = lcg_rand_n (pixman_image_get_height (mask_img)); - } - - - w = lcg_rand_n (dst_width - dst_x + 1); - h = lcg_rand_n (dst_height - dst_y + 1); - - if (verbose) - { - printf ("op=%d, src_fmt=%08X, dst_fmt=%08X, mask_fmt=%08X\n", - op, src_fmt, dst_fmt, mask_fmt); - printf ("src_width=%d, src_height=%d, dst_width=%d, dst_height=%d\n", - src_width, src_height, dst_width, dst_height); - printf ("src_x=%d, src_y=%d, dst_x=%d, dst_y=%d\n", - src_x, src_y, dst_x, dst_y); - printf ("src_stride=%d, dst_stride=%d\n", - src_stride, dst_stride); - printf ("w=%d, h=%d\n", w, h); - } - - pixman_image_composite (op, src_img, mask_img, dst_img, - src_x, src_y, mask_x, mask_y, dst_x, dst_y, w, h); - - if (verbose) - { - int j; - - printf ("---\n"); - for (i = 0; i < dst_height; i++) - { - for (j = 0; j < dst_stride; j++) - { - if (j == (dst_width * PIXMAN_FORMAT_BPP (dst_fmt) + 7) / 8) - printf ("| "); - - printf ("%02X ", *((uint8_t *)dstbuf + i * dst_stride + j)); - } - printf ("\n"); - } - printf ("---\n"); - } - - free_random_image (initcrc, src_img, -1); - crc32 = free_random_image (initcrc, dst_img, dst_fmt); - - if (mask_img) - { - if (srcbuf == maskbuf) - pixman_image_unref(mask_img); - else - free_random_image (initcrc, mask_img, -1); - } - - - return crc32; -} - -static void -initialize_palette (void) -{ - int i; - - for (i = 0; i < PIXMAN_MAX_INDEXED; ++i) - palette.rgba[i] = lcg_rand (); - - for (i = 0; i < 32768; ++i) - palette.ent[i] = lcg_rand() & 0xff; -} - -int -main (int argc, char *argv[]) -{ - int i, n1 = 1, n2 = 0; - uint32_t crc = 0; - int verbose = getenv ("VERBOSE") != NULL; - - initialize_palette(); - - if (argc >= 3) - { - n1 = atoi (argv[1]); - n2 = atoi (argv[2]); - } - else if (argc >= 2) - { - n2 = atoi (argv[1]); - } - else - { - n1 = 1; - n2 = 2000000; - } - - if (n2 < 0) - { - crc = test_composite (0, abs (n2), 1); - printf ("crc32=%08X\n", crc); - } - else - { - for (i = n1; i <= n2; i++) - { - crc = test_composite (crc, i, 0); - - if (verbose) - printf ("%d: %08X\n", i, crc); - } - printf ("crc32=%08X\n", crc); - - if (n2 == 2000000) - { - /* Predefined value for running with all the fastpath functions - disabled. It needs to be updated every time when changes are - introduced to this program or behavior of pixman changes! */ - if (crc == 0x8F9F7DC1) - { - printf ("blitters test passed\n"); - } - else - { - printf ("blitters test failed!\n"); - return 1; - } - } - } - return 0; -} +/*
+ * Test program, which stresses the use of different color formats and
+ * compositing operations.
+ *
+ * Script 'fuzzer-find-diff.pl' can be used to narrow down the problem in
+ * the case of test failure.
+ */
+#include <assert.h>
+#include <stdlib.h>
+#include <stdio.h>
+#include <config.h>
+#include "utils.h"
+
+static pixman_indexed_t rgb_palette[9];
+static pixman_indexed_t y_palette[9];
+
+static void *
+aligned_malloc (size_t align, size_t size)
+{
+ void *result;
+
+#ifdef HAVE_POSIX_MEMALIGN
+ if (posix_memalign (&result, align, size) != 0)
+ result = NULL;
+#else
+ result = malloc (size);
+#endif
+
+ return result;
+}
+
+/* Create random image for testing purposes */
+static pixman_image_t *
+create_random_image (pixman_format_code_t *allowed_formats,
+ int max_width,
+ int max_height,
+ int max_extra_stride,
+ pixman_format_code_t *used_fmt)
+{
+ int n = 0, i, width, height, stride;
+ pixman_format_code_t fmt;
+ uint32_t *buf;
+ pixman_image_t *img;
+
+ while (allowed_formats[n] != -1)
+ n++;
+ fmt = allowed_formats[lcg_rand_n (n)];
+
+ width = lcg_rand_n (max_width) + 1;
+ height = lcg_rand_n (max_height) + 1;
+ stride = (width * PIXMAN_FORMAT_BPP (fmt) + 7) / 8 +
+ lcg_rand_n (max_extra_stride + 1);
+ stride = (stride + 3) & ~3;
+
+ /* do the allocation */
+ buf = aligned_malloc (64, stride * height);
+
+ /* initialize image with random data */
+ for (i = 0; i < stride * height; i++)
+ {
+ /* generation is biased to having more 0 or 255 bytes as
+ * they are more likely to be special-cased in code
+ */
+ *((uint8_t *)buf + i) = lcg_rand_n (4) ? lcg_rand_n (256) :
+ (lcg_rand_n (2) ? 0 : 255);
+ }
+
+ img = pixman_image_create_bits (fmt, width, height, buf, stride);
+
+ if (PIXMAN_FORMAT_TYPE (fmt) == PIXMAN_TYPE_COLOR)
+ {
+ pixman_image_set_indexed (img, &(rgb_palette[PIXMAN_FORMAT_BPP (fmt)]));
+ }
+ else if (PIXMAN_FORMAT_TYPE (fmt) == PIXMAN_TYPE_GRAY)
+ {
+ pixman_image_set_indexed (img, &(y_palette[PIXMAN_FORMAT_BPP (fmt)]));
+ }
+
+ image_endian_swap (img, PIXMAN_FORMAT_BPP (fmt));
+
+ if (used_fmt) *used_fmt = fmt;
+ return img;
+}
+
+/* Free random image, and optionally update crc32 based on its data */
+static uint32_t
+free_random_image (uint32_t initcrc,
+ pixman_image_t *img,
+ pixman_format_code_t fmt)
+{
+ uint32_t crc32 = 0;
+ int stride = pixman_image_get_stride (img);
+ uint32_t *data = pixman_image_get_data (img);
+ int height = pixman_image_get_height (img);
+
+ if (fmt != -1)
+ {
+ /* mask unused 'x' part */
+ if (PIXMAN_FORMAT_BPP (fmt) - PIXMAN_FORMAT_DEPTH (fmt) &&
+ PIXMAN_FORMAT_DEPTH (fmt) != 0)
+ {
+ int i;
+ uint32_t *data = pixman_image_get_data (img);
+ uint32_t mask = (1 << PIXMAN_FORMAT_DEPTH (fmt)) - 1;
+
+ if (PIXMAN_FORMAT_TYPE (fmt) == PIXMAN_TYPE_BGRA)
+ mask <<= (PIXMAN_FORMAT_BPP (fmt) - PIXMAN_FORMAT_DEPTH (fmt));
+
+ for (i = 0; i < 32; i++)
+ mask |= mask << (i * PIXMAN_FORMAT_BPP (fmt));
+
+ for (i = 0; i < stride * height / 4; i++)
+ data[i] &= mask;
+ }
+
+ /* swap endiannes in order to provide identical results on both big
+ * and litte endian systems
+ */
+ image_endian_swap (img, PIXMAN_FORMAT_BPP (fmt));
+ crc32 = compute_crc32 (initcrc, data, stride * height);
+ }
+
+ pixman_image_unref (img);
+ free (data);
+
+ return crc32;
+}
+
+static pixman_op_t op_list[] = {
+ PIXMAN_OP_SRC,
+ PIXMAN_OP_OVER,
+ PIXMAN_OP_ADD,
+ PIXMAN_OP_CLEAR,
+ PIXMAN_OP_SRC,
+ PIXMAN_OP_DST,
+ PIXMAN_OP_OVER,
+ PIXMAN_OP_OVER_REVERSE,
+ PIXMAN_OP_IN,
+ PIXMAN_OP_IN_REVERSE,
+ PIXMAN_OP_OUT,
+ PIXMAN_OP_OUT_REVERSE,
+ PIXMAN_OP_ATOP,
+ PIXMAN_OP_ATOP_REVERSE,
+ PIXMAN_OP_XOR,
+ PIXMAN_OP_ADD,
+ PIXMAN_OP_SATURATE,
+ PIXMAN_OP_DISJOINT_CLEAR,
+ PIXMAN_OP_DISJOINT_SRC,
+ PIXMAN_OP_DISJOINT_DST,
+ PIXMAN_OP_DISJOINT_OVER,
+ PIXMAN_OP_DISJOINT_OVER_REVERSE,
+ PIXMAN_OP_DISJOINT_IN,
+ PIXMAN_OP_DISJOINT_IN_REVERSE,
+ PIXMAN_OP_DISJOINT_OUT,
+ PIXMAN_OP_DISJOINT_OUT_REVERSE,
+ PIXMAN_OP_DISJOINT_ATOP,
+ PIXMAN_OP_DISJOINT_ATOP_REVERSE,
+ PIXMAN_OP_DISJOINT_XOR,
+ PIXMAN_OP_CONJOINT_CLEAR,
+ PIXMAN_OP_CONJOINT_SRC,
+ PIXMAN_OP_CONJOINT_DST,
+ PIXMAN_OP_CONJOINT_OVER,
+ PIXMAN_OP_CONJOINT_OVER_REVERSE,
+ PIXMAN_OP_CONJOINT_IN,
+ PIXMAN_OP_CONJOINT_IN_REVERSE,
+ PIXMAN_OP_CONJOINT_OUT,
+ PIXMAN_OP_CONJOINT_OUT_REVERSE,
+ PIXMAN_OP_CONJOINT_ATOP,
+ PIXMAN_OP_CONJOINT_ATOP_REVERSE,
+ PIXMAN_OP_CONJOINT_XOR,
+ PIXMAN_OP_MULTIPLY,
+ PIXMAN_OP_SCREEN,
+ PIXMAN_OP_OVERLAY,
+ PIXMAN_OP_DARKEN,
+ PIXMAN_OP_LIGHTEN,
+ PIXMAN_OP_COLOR_DODGE,
+ PIXMAN_OP_COLOR_BURN,
+ PIXMAN_OP_HARD_LIGHT,
+ PIXMAN_OP_DIFFERENCE,
+ PIXMAN_OP_EXCLUSION,
+#if 0 /* these use floating point math and are not always bitexact on different platforms */
+ PIXMAN_OP_SOFT_LIGHT,
+ PIXMAN_OP_HSL_HUE,
+ PIXMAN_OP_HSL_SATURATION,
+ PIXMAN_OP_HSL_COLOR,
+ PIXMAN_OP_HSL_LUMINOSITY,
+#endif
+};
+
+static pixman_format_code_t img_fmt_list[] = {
+ PIXMAN_a8r8g8b8,
+ PIXMAN_x8r8g8b8,
+ PIXMAN_r5g6b5,
+ PIXMAN_r3g3b2,
+ PIXMAN_a8,
+ PIXMAN_a8b8g8r8,
+ PIXMAN_x8b8g8r8,
+ PIXMAN_b8g8r8a8,
+ PIXMAN_b8g8r8x8,
+ PIXMAN_x14r6g6b6,
+ PIXMAN_r8g8b8,
+ PIXMAN_b8g8r8,
+ PIXMAN_r5g6b5,
+ PIXMAN_b5g6r5,
+ PIXMAN_x2r10g10b10,
+ PIXMAN_a2r10g10b10,
+ PIXMAN_x2b10g10r10,
+ PIXMAN_a2b10g10r10,
+ PIXMAN_a1r5g5b5,
+ PIXMAN_x1r5g5b5,
+ PIXMAN_a1b5g5r5,
+ PIXMAN_x1b5g5r5,
+ PIXMAN_a4r4g4b4,
+ PIXMAN_x4r4g4b4,
+ PIXMAN_a4b4g4r4,
+ PIXMAN_x4b4g4r4,
+ PIXMAN_a8,
+ PIXMAN_r3g3b2,
+ PIXMAN_b2g3r3,
+ PIXMAN_a2r2g2b2,
+ PIXMAN_a2b2g2r2,
+ PIXMAN_c8,
+ PIXMAN_g8,
+ PIXMAN_x4c4,
+ PIXMAN_x4g4,
+ PIXMAN_c4,
+ PIXMAN_g4,
+ PIXMAN_g1,
+ PIXMAN_x4a4,
+ PIXMAN_a4,
+ PIXMAN_r1g2b1,
+ PIXMAN_b1g2r1,
+ PIXMAN_a1r1g1b1,
+ PIXMAN_a1b1g1r1,
+ PIXMAN_a1,
+ -1
+};
+
+static pixman_format_code_t mask_fmt_list[] = {
+ PIXMAN_a8r8g8b8,
+ PIXMAN_a8,
+ PIXMAN_a4,
+ PIXMAN_a1,
+ -1
+};
+
+
+/*
+ * Composite operation with pseudorandom images
+ */
+uint32_t
+test_composite (int testnum, int verbose)
+{
+ int i;
+ pixman_image_t *src_img = NULL;
+ pixman_image_t *dst_img = NULL;
+ pixman_image_t *mask_img = NULL;
+ int src_width, src_height;
+ int dst_width, dst_height;
+ int src_stride, dst_stride;
+ int src_x, src_y;
+ int dst_x, dst_y;
+ int mask_x, mask_y;
+ int w, h;
+ int op;
+ pixman_format_code_t src_fmt, dst_fmt, mask_fmt;
+ uint32_t *dstbuf, *srcbuf, *maskbuf;
+ uint32_t crc32;
+ int max_width, max_height, max_extra_stride;
+
+ max_width = max_height = 24 + testnum / 10000;
+ max_extra_stride = 4 + testnum / 1000000;
+
+ if (max_width > 256)
+ max_width = 256;
+
+ if (max_height > 16)
+ max_height = 16;
+
+ if (max_extra_stride > 8)
+ max_extra_stride = 8;
+
+ lcg_srand (testnum);
+
+ op = op_list[lcg_rand_n (sizeof (op_list) / sizeof (op_list[0]))];
+
+ if (lcg_rand_n (8))
+ {
+ /* normal image */
+ src_img = create_random_image (img_fmt_list, max_width, max_height,
+ max_extra_stride, &src_fmt);
+ }
+ else
+ {
+ /* solid case */
+ src_img = create_random_image (img_fmt_list, 1, 1,
+ max_extra_stride, &src_fmt);
+
+ pixman_image_set_repeat (src_img, PIXMAN_REPEAT_NORMAL);
+ }
+
+ dst_img = create_random_image (img_fmt_list, max_width, max_height,
+ max_extra_stride, &dst_fmt);
+
+ src_width = pixman_image_get_width (src_img);
+ src_height = pixman_image_get_height (src_img);
+ src_stride = pixman_image_get_stride (src_img);
+
+ dst_width = pixman_image_get_width (dst_img);
+ dst_height = pixman_image_get_height (dst_img);
+ dst_stride = pixman_image_get_stride (dst_img);
+
+ dstbuf = pixman_image_get_data (dst_img);
+ srcbuf = pixman_image_get_data (src_img);
+
+ src_x = lcg_rand_n (src_width);
+ src_y = lcg_rand_n (src_height);
+ dst_x = lcg_rand_n (dst_width);
+ dst_y = lcg_rand_n (dst_height);
+
+ mask_img = NULL;
+ mask_fmt = -1;
+ mask_x = 0;
+ mask_y = 0;
+ maskbuf = NULL;
+
+ if ((src_fmt == PIXMAN_x8r8g8b8 || src_fmt == PIXMAN_x8b8g8r8) &&
+ (lcg_rand_n (4) == 0))
+ {
+ /* PIXBUF */
+ mask_fmt = lcg_rand_n (2) ? PIXMAN_a8r8g8b8 : PIXMAN_a8b8g8r8;
+ mask_img = pixman_image_create_bits (mask_fmt,
+ src_width,
+ src_height,
+ srcbuf,
+ src_stride);
+ mask_x = src_x;
+ mask_y = src_y;
+ maskbuf = srcbuf;
+ }
+ else if (lcg_rand_n (2))
+ {
+ if (lcg_rand_n (2))
+ {
+ mask_img = create_random_image (mask_fmt_list, max_width, max_height,
+ max_extra_stride, &mask_fmt);
+ }
+ else
+ {
+ /* solid case */
+ mask_img = create_random_image (mask_fmt_list, 1, 1,
+ max_extra_stride, &mask_fmt);
+ pixman_image_set_repeat (mask_img, PIXMAN_REPEAT_NORMAL);
+ }
+
+ if (lcg_rand_n (2))
+ pixman_image_set_component_alpha (mask_img, 1);
+
+ mask_x = lcg_rand_n (pixman_image_get_width (mask_img));
+ mask_y = lcg_rand_n (pixman_image_get_height (mask_img));
+ }
+
+
+ w = lcg_rand_n (dst_width - dst_x + 1);
+ h = lcg_rand_n (dst_height - dst_y + 1);
+
+ if (verbose)
+ {
+ printf ("op=%d, src_fmt=%08X, dst_fmt=%08X, mask_fmt=%08X\n",
+ op, src_fmt, dst_fmt, mask_fmt);
+ printf ("src_width=%d, src_height=%d, dst_width=%d, dst_height=%d\n",
+ src_width, src_height, dst_width, dst_height);
+ printf ("src_x=%d, src_y=%d, dst_x=%d, dst_y=%d\n",
+ src_x, src_y, dst_x, dst_y);
+ printf ("src_stride=%d, dst_stride=%d\n",
+ src_stride, dst_stride);
+ printf ("w=%d, h=%d\n", w, h);
+ }
+
+ pixman_image_composite (op, src_img, mask_img, dst_img,
+ src_x, src_y, mask_x, mask_y, dst_x, dst_y, w, h);
+
+ if (verbose)
+ {
+ int j;
+
+ printf ("---\n");
+ for (i = 0; i < dst_height; i++)
+ {
+ for (j = 0; j < dst_stride; j++)
+ {
+ if (j == (dst_width * PIXMAN_FORMAT_BPP (dst_fmt) + 7) / 8)
+ printf ("| ");
+
+ printf ("%02X ", *((uint8_t *)dstbuf + i * dst_stride + j));
+ }
+ printf ("\n");
+ }
+ printf ("---\n");
+ }
+
+ free_random_image (0, src_img, -1);
+ crc32 = free_random_image (0, dst_img, dst_fmt);
+
+ if (mask_img)
+ {
+ if (srcbuf == maskbuf)
+ pixman_image_unref(mask_img);
+ else
+ free_random_image (0, mask_img, -1);
+ }
+
+
+ return crc32;
+}
+
+#define CONVERT_15(c, is_rgb) \
+ (is_rgb? \
+ ((((c) >> 3) & 0x001f) | \
+ (((c) >> 6) & 0x03e0) | \
+ (((c) >> 9) & 0x7c00)) : \
+ (((((c) >> 16) & 0xff) * 153 + \
+ (((c) >> 8) & 0xff) * 301 + \
+ (((c) ) & 0xff) * 58) >> 2))
+
+static void
+initialize_palette (pixman_indexed_t *palette, uint32_t mask, int is_rgb)
+{
+ int i;
+
+ for (i = 0; i < 32768; ++i)
+ palette->ent[i] = lcg_rand() & mask;
+
+ for (i = 0; i < mask + 1; ++i)
+ {
+ uint32_t rgba24;
+ pixman_bool_t retry;
+ uint32_t i15;
+
+ /* We filled the rgb->index map with random numbers, but we
+ * do need the ability to round trip, that is if some indexed
+ * color expands to an argb24, then the 15 bit version of that
+ * color must map back to the index. Anything else, we don't
+ * care about too much.
+ */
+ do
+ {
+ uint32_t old_idx;
+
+ rgba24 = lcg_rand();
+ i15 = CONVERT_15 (rgba24, is_rgb);
+
+ old_idx = palette->ent[i15];
+ if (CONVERT_15 (palette->rgba[old_idx], is_rgb) == i15)
+ retry = 1;
+ else
+ retry = 0;
+ } while (retry);
+
+ palette->rgba[i] = rgba24;
+ palette->ent[i15] = i;
+ }
+
+ for (i = 0; i < mask + 1; ++i)
+ {
+ assert (palette->ent[CONVERT_15 (palette->rgba[i], is_rgb)] == i);
+ }
+}
+
+int
+main (int argc, const char *argv[])
+{
+ int i;
+
+ for (i = 1; i <= 8; i++)
+ {
+ initialize_palette (&(rgb_palette[i]), (1 << i) - 1, TRUE);
+ initialize_palette (&(y_palette[i]), (1 << i) - 1, FALSE);
+ }
+
+ return fuzzer_test_main("blitters", 2000000,
+ 0x217CF14A,
+ test_composite, argc, argv);
+}
diff --git a/pixman/test/fuzzer-find-diff.pl b/pixman/test/fuzzer-find-diff.pl new file mode 100644 index 000000000..a43f6fb83 --- /dev/null +++ b/pixman/test/fuzzer-find-diff.pl @@ -0,0 +1,68 @@ +#!/usr/bin/env perl
+
+$usage = "Usage:
+ fuzzer-find-diff.pl reference_binary new_binary [number_of_tests_to_run]
+
+The first two input arguments are the commands to run the test programs
+based on fuzzer_test_main() function from 'util.c' (preferably they should
+be statically compiled, this can be achieved via '--disable-shared' pixman
+configure option). The third optional argument is the number of test rounds
+to run (if not specified, then testing runs infinitely or until some problem
+is detected).
+
+Usage examples:
+ fuzzer-find-diff.pl ./blitters-test-with-sse-disabled ./blitters-test 9000000
+ fuzzer-find-diff.pl ./blitters-test \"ssh ppc64_host /path/to/blitters-test\"
+";
+
+$#ARGV >= 1 or die $usage;
+
+$batch_size = 10000;
+
+if ($#ARGV >= 2) {
+ $number_of_tests = int($ARGV[2]);
+} else {
+ $number_of_tests = -1
+}
+
+sub test_range {
+ my $min = shift;
+ my $max = shift;
+
+ if (`$ARGV[0] $min $max 2>/dev/null` eq `$ARGV[1] $min $max 2>/dev/null`) {
+ return;
+ }
+
+ while ($max != $min + 1) {
+ my $avg = int(($min + $max) / 2);
+ my $res1 = `$ARGV[0] $min $avg 2>/dev/null`;
+ my $res2 = `$ARGV[1] $min $avg 2>/dev/null`;
+ if ($res1 ne $res2) {
+ $max = $avg;
+ } else {
+ $min = $avg;
+ }
+ }
+ return $max;
+}
+
+$base = 1;
+while ($number_of_tests <= 0 || $base <= $number_of_tests) {
+ printf("testing %-12d\r", $base + $batch_size - 1);
+ my $res = test_range($base, $base + $batch_size - 1);
+ if ($res) {
+ printf("Failure: results are different for test %d:\n", $res);
+
+ printf("\n-- ref --\n");
+ print `$ARGV[0] $res`;
+ printf("-- new --\n");
+ print `$ARGV[1] $res`;
+
+ printf("The problematic conditions can be reproduced by running:\n");
+ printf("$ARGV[1] %d\n", $res);
+
+ exit(1);
+ }
+ $base += $batch_size;
+}
+printf("Success: %d tests finished\n", $base - 1);
diff --git a/pixman/test/gradient-crash-test.c b/pixman/test/gradient-crash-test.c new file mode 100644 index 000000000..88424dee9 --- /dev/null +++ b/pixman/test/gradient-crash-test.c @@ -0,0 +1,117 @@ +#include <stdio.h>
+#include <stdlib.h>
+#include "pixman.h"
+
+int
+main (int argc, char **argv)
+{
+#define WIDTH 400
+#define HEIGHT 200
+
+ uint32_t *dest = malloc (WIDTH * HEIGHT * 4);
+ pixman_image_t *src_img;
+ pixman_image_t *dest_img;
+ int i, j;
+
+ pixman_gradient_stop_t onestop[1] =
+ {
+ { pixman_int_to_fixed (1), { 0xffff, 0xeeee, 0xeeee, 0xeeee } },
+ };
+
+ pixman_gradient_stop_t subsetstops[2] =
+ {
+ { pixman_int_to_fixed (1), { 0xffff, 0xeeee, 0xeeee, 0xeeee } },
+ { pixman_int_to_fixed (1), { 0xffff, 0xeeee, 0xeeee, 0xeeee } },
+ };
+
+ pixman_gradient_stop_t stops01[2] =
+ {
+ { pixman_int_to_fixed (0), { 0xffff, 0xeeee, 0xeeee, 0xeeee } },
+ { pixman_int_to_fixed (1), { 0xffff, 0x1111, 0x1111, 0x1111 } }
+ };
+
+ pixman_point_fixed_t p1 = { pixman_double_to_fixed (0), 0 };
+ pixman_point_fixed_t p2 = { pixman_double_to_fixed (WIDTH / 8.),
+ pixman_int_to_fixed (0) };
+
+#if 0
+ pixman_transform_t trans = {
+ { { pixman_double_to_fixed (2), pixman_double_to_fixed (0.5), pixman_double_to_fixed (-100), },
+ { pixman_double_to_fixed (0), pixman_double_to_fixed (3), pixman_double_to_fixed (0), },
+ { pixman_double_to_fixed (0), pixman_double_to_fixed (0.000), pixman_double_to_fixed (1.0) }
+ }
+ };
+#else
+ pixman_transform_t trans = {
+ { { pixman_fixed_1, 0, 0 },
+ { 0, pixman_fixed_1, 0 },
+ { 0, 0, pixman_fixed_1 } }
+ };
+#endif
+
+ pixman_point_fixed_t c_inner;
+ pixman_point_fixed_t c_outer;
+ pixman_fixed_t r_inner;
+ pixman_fixed_t r_outer;
+
+ for (i = 0; i < WIDTH * HEIGHT; ++i)
+ dest[i] = 0x4f00004f; /* pale blue */
+
+ dest_img = pixman_image_create_bits (PIXMAN_a8r8g8b8,
+ WIDTH, HEIGHT,
+ dest,
+ WIDTH * 4);
+
+ c_inner.x = pixman_double_to_fixed (50.0);
+ c_inner.y = pixman_double_to_fixed (50.0);
+ c_outer.x = pixman_double_to_fixed (50.0);
+ c_outer.y = pixman_double_to_fixed (50.0);
+ r_inner = 0;
+ r_outer = pixman_double_to_fixed (50.0);
+
+ for (i = 0; i < 3; ++i)
+ {
+ pixman_gradient_stop_t *stops;
+ int num_stops;
+ if (i == 0)
+ {
+ stops = onestop;
+ num_stops = sizeof(onestop) / sizeof(onestop[0]);
+ }
+ else if (i == 1)
+ {
+ stops = subsetstops;
+ num_stops = sizeof(subsetstops) / sizeof(subsetstops[0]);
+ }
+ else
+ {
+ stops = stops01;
+ num_stops = sizeof(stops01) / sizeof(stops01[0]);
+ }
+
+ for (j = 0; j < 3; ++j)
+ {
+ if (j == 0)
+ src_img = pixman_image_create_conical_gradient (&c_inner, r_inner,
+ stops, num_stops);
+ else if (j == 1)
+ src_img = pixman_image_create_radial_gradient (&c_inner, &c_outer,
+ r_inner, r_outer,
+ stops, num_stops);
+ else
+ src_img = pixman_image_create_linear_gradient (&p1, &p2,
+ stops, num_stops);
+ pixman_image_set_transform (src_img, &trans);
+ pixman_image_set_repeat (src_img, PIXMAN_REPEAT_NONE);
+ pixman_image_composite (PIXMAN_OP_OVER, src_img, NULL, dest_img,
+ 0, 0, 0, 0, 0, 0, 10 * WIDTH, HEIGHT);
+
+ }
+ pixman_image_unref (src_img);
+ }
+
+ pixman_image_unref (dest_img);
+ free (dest);
+
+ return 0;
+}
diff --git a/pixman/test/gtk-utils.c b/pixman/test/gtk-utils.c index 751a164c0..f45cdc912 100644 --- a/pixman/test/gtk-utils.c +++ b/pixman/test/gtk-utils.c @@ -1,113 +1,115 @@ -#include <gtk/gtk.h> -#include <config.h> -#include "pixman-private.h" /* For image->bits.format - * FIXME: there should probably be public API for this - */ -#include "gtk-utils.h" - -GdkPixbuf * -pixbuf_from_argb32 (uint32_t *bits, - gboolean has_alpha, - int width, - int height, - int stride) -{ - GdkPixbuf *pixbuf = gdk_pixbuf_new (GDK_COLORSPACE_RGB, TRUE, - 8, width, height); - int p_stride = gdk_pixbuf_get_rowstride (pixbuf); - guint32 *p_bits = (guint32 *)gdk_pixbuf_get_pixels (pixbuf); - int w, h; - - for (h = 0; h < height; ++h) - { - for (w = 0; w < width; ++w) - { - uint32_t argb = bits[h * (stride / 4) + w]; - guint r, g, b, a; - char *pb = (char *)p_bits; - - pb += h * p_stride + w * 4; - - r = (argb & 0x00ff0000) >> 16; - g = (argb & 0x0000ff00) >> 8; - b = (argb & 0x000000ff) >> 0; - a = has_alpha? (argb & 0xff000000) >> 24 : 0xff; - - if (a) - { - r = (r * 255) / a; - g = (g * 255) / a; - b = (b * 255) / a; - } - - if (r > 255) r = 255; - if (g > 255) g = 255; - if (b > 255) b = 255; - - pb[0] = r; - pb[1] = g; - pb[2] = b; - pb[3] = a; - } - } - - return pixbuf; -} - - -static gboolean -on_expose (GtkWidget *widget, GdkEventExpose *expose, gpointer data) -{ - GdkPixbuf *pixbuf = data; - - gdk_draw_pixbuf (widget->window, NULL, - pixbuf, 0, 0, 0, 0, - gdk_pixbuf_get_width (pixbuf), - gdk_pixbuf_get_height (pixbuf), - GDK_RGB_DITHER_NONE, - 0, 0); - - return TRUE; -} - -void -show_image (pixman_image_t *image) -{ - GtkWidget *window; - GdkPixbuf *pixbuf; - int width, height, stride; - int argc; - char **argv; - char *arg0 = g_strdup ("pixman-test-program"); - gboolean has_alpha; - pixman_format_code_t format; - - argc = 1; - argv = (char **)&arg0; - - gtk_init (&argc, &argv); - - window = gtk_window_new (GTK_WINDOW_TOPLEVEL); - width = pixman_image_get_width (image); - height = pixman_image_get_height (image); - stride = pixman_image_get_stride (image); - - format = image->bits.format; - - if (format == PIXMAN_a8r8g8b8) - has_alpha = TRUE; - else if (format == PIXMAN_x8r8g8b8) - has_alpha = FALSE; - else - g_error ("Can't deal with this format: %x\n", format); - - pixbuf = pixbuf_from_argb32 (pixman_image_get_data (image), has_alpha, - width, height, stride); - - g_signal_connect (window, "expose_event", G_CALLBACK (on_expose), pixbuf); - g_signal_connect (window, "delete_event", G_CALLBACK (gtk_main_quit), NULL); - - gtk_widget_show (window); - - gtk_main (); -} +#include <gtk/gtk.h>
+#include <config.h>
+#include "pixman-private.h" /* For image->bits.format
+ * FIXME: there should probably be public API for this
+ */
+#include "gtk-utils.h"
+
+GdkPixbuf *
+pixbuf_from_argb32 (uint32_t *bits,
+ gboolean has_alpha,
+ int width,
+ int height,
+ int stride)
+{
+ GdkPixbuf *pixbuf = gdk_pixbuf_new (GDK_COLORSPACE_RGB, TRUE,
+ 8, width, height);
+ int p_stride = gdk_pixbuf_get_rowstride (pixbuf);
+ guint32 *p_bits = (guint32 *)gdk_pixbuf_get_pixels (pixbuf);
+ int w, h;
+
+ for (h = 0; h < height; ++h)
+ {
+ for (w = 0; w < width; ++w)
+ {
+ uint32_t argb = bits[h * (stride / 4) + w];
+ guint r, g, b, a;
+ char *pb = (char *)p_bits;
+
+ pb += h * p_stride + w * 4;
+
+ r = (argb & 0x00ff0000) >> 16;
+ g = (argb & 0x0000ff00) >> 8;
+ b = (argb & 0x000000ff) >> 0;
+ a = has_alpha? (argb & 0xff000000) >> 24 : 0xff;
+
+ if (a)
+ {
+ r = (r * 255) / a;
+ g = (g * 255) / a;
+ b = (b * 255) / a;
+ }
+
+ if (r > 255) r = 255;
+ if (g > 255) g = 255;
+ if (b > 255) b = 255;
+
+ pb[0] = r;
+ pb[1] = g;
+ pb[2] = b;
+ pb[3] = a;
+ }
+ }
+
+ return pixbuf;
+}
+
+
+static gboolean
+on_expose (GtkWidget *widget, GdkEventExpose *expose, gpointer data)
+{
+ GdkPixbuf *pixbuf = data;
+
+ gdk_draw_pixbuf (widget->window, NULL,
+ pixbuf, 0, 0, 0, 0,
+ gdk_pixbuf_get_width (pixbuf),
+ gdk_pixbuf_get_height (pixbuf),
+ GDK_RGB_DITHER_NONE,
+ 0, 0);
+
+ return TRUE;
+}
+
+void
+show_image (pixman_image_t *image)
+{
+ GtkWidget *window;
+ GdkPixbuf *pixbuf;
+ int width, height, stride;
+ int argc;
+ char **argv;
+ char *arg0 = g_strdup ("pixman-test-program");
+ gboolean has_alpha;
+ pixman_format_code_t format;
+
+ argc = 1;
+ argv = (char **)&arg0;
+
+ gtk_init (&argc, &argv);
+
+ window = gtk_window_new (GTK_WINDOW_TOPLEVEL);
+ width = pixman_image_get_width (image);
+ height = pixman_image_get_height (image);
+ stride = pixman_image_get_stride (image);
+
+ gtk_window_set_default_size (GTK_WINDOW (window), width, height);
+
+ format = image->bits.format;
+
+ if (format == PIXMAN_a8r8g8b8)
+ has_alpha = TRUE;
+ else if (format == PIXMAN_x8r8g8b8)
+ has_alpha = FALSE;
+ else
+ g_error ("Can't deal with this format: %x\n", format);
+
+ pixbuf = pixbuf_from_argb32 (pixman_image_get_data (image), has_alpha,
+ width, height, stride);
+
+ g_signal_connect (window, "expose_event", G_CALLBACK (on_expose), pixbuf);
+ g_signal_connect (window, "delete_event", G_CALLBACK (gtk_main_quit), NULL);
+
+ gtk_widget_show (window);
+
+ gtk_main ();
+}
diff --git a/pixman/test/scaling-crash-test.c b/pixman/test/scaling-crash-test.c new file mode 100644 index 000000000..7e8b6d56b --- /dev/null +++ b/pixman/test/scaling-crash-test.c @@ -0,0 +1,124 @@ +#include <assert.h>
+#include <stdlib.h>
+#include <stdio.h>
+#include <string.h>
+#include "pixman.h"
+
+/*
+ * We have a source image filled with solid color, set NORMAL or PAD repeat,
+ * and some transform which results in nearest neighbour scaling.
+ *
+ * The expected result is the destination image filled with this solid
+ * color.
+ */
+static int
+do_test (int32_t dst_size,
+ int32_t src_size,
+ int32_t src_offs,
+ int32_t scale_factor,
+ pixman_repeat_t repeat)
+{
+ int i;
+ pixman_image_t * src_img;
+ pixman_image_t * dst_img;
+ pixman_transform_t transform;
+ uint32_t * srcbuf;
+ uint32_t * dstbuf;
+
+ srcbuf = (uint32_t *)malloc (src_size * 4);
+ dstbuf = (uint32_t *)malloc (dst_size * 4);
+
+ /* horizontal test */
+ memset (srcbuf, 0xCC, src_size * 4);
+ memset (dstbuf, 0x33, dst_size * 4);
+
+ src_img = pixman_image_create_bits (
+ PIXMAN_a8r8g8b8, src_size, 1, srcbuf, src_size * 4);
+ dst_img = pixman_image_create_bits (
+ PIXMAN_a8r8g8b8, dst_size, 1, dstbuf, dst_size * 4);
+
+ pixman_transform_init_scale (&transform, scale_factor, 65536);
+ pixman_image_set_transform (src_img, &transform);
+ pixman_image_set_repeat (src_img, repeat);
+ pixman_image_set_filter (src_img, PIXMAN_FILTER_NEAREST, NULL, 0);
+
+ pixman_image_composite (PIXMAN_OP_SRC, src_img, NULL, dst_img,
+ src_offs, 0, 0, 0, 0, 0, dst_size, 1);
+
+ pixman_image_unref (src_img);
+ pixman_image_unref (dst_img);
+
+ for (i = 0; i < dst_size; i++)
+ {
+ if (dstbuf[i] != 0xCCCCCCCC)
+ {
+ free (srcbuf);
+ free (dstbuf);
+ return 1;
+ }
+ }
+
+ /* vertical test */
+ memset (srcbuf, 0xCC, src_size * 4);
+ memset (dstbuf, 0x33, dst_size * 4);
+
+ src_img = pixman_image_create_bits (
+ PIXMAN_a8r8g8b8, 1, src_size, srcbuf, 4);
+ dst_img = pixman_image_create_bits (
+ PIXMAN_a8r8g8b8, 1, dst_size, dstbuf, 4);
+
+ pixman_transform_init_scale (&transform, 65536, scale_factor);
+ pixman_image_set_transform (src_img, &transform);
+ pixman_image_set_repeat (src_img, repeat);
+ pixman_image_set_filter (src_img, PIXMAN_FILTER_NEAREST, NULL, 0);
+
+ pixman_image_composite (PIXMAN_OP_SRC, src_img, NULL, dst_img,
+ 0, src_offs, 0, 0, 0, 0, 1, dst_size);
+
+ pixman_image_unref (src_img);
+ pixman_image_unref (dst_img);
+
+ for (i = 0; i < dst_size; i++)
+ {
+ if (dstbuf[i] != 0xCCCCCCCC)
+ {
+ free (srcbuf);
+ free (dstbuf);
+ return 1;
+ }
+ }
+
+ free (srcbuf);
+ free (dstbuf);
+ return 0;
+}
+
+int
+main (int argc, char *argv[])
+{
+ pixman_disable_out_of_bounds_workaround ();
+
+ /* can potentially crash */
+ assert (do_test (
+ 48000, 32767, 1, 65536 * 128, PIXMAN_REPEAT_NORMAL) == 0);
+
+ /* can potentially get into a deadloop */
+ assert (do_test (
+ 16384, 65536, 32, 32768, PIXMAN_REPEAT_NORMAL) == 0);
+
+#if 0
+ /* can potentially access memory outside source image buffer */
+ assert (do_test (
+ 10, 10, 0, 1, PIXMAN_REPEAT_PAD) == 0);
+ assert (do_test (
+ 10, 10, 0, 0, PIXMAN_REPEAT_PAD) == 0);
+#endif
+
+#if 0
+ /* can potentially provide invalid results (out of range matrix stuff) */
+ assert (do_test (
+ 48000, 32767, 16384, 65536 * 128, PIXMAN_REPEAT_NORMAL) == 0);
+#endif
+
+ return 0;
+}
diff --git a/pixman/test/scaling-test.c b/pixman/test/scaling-test.c index 29772906d..54236faa3 100644 --- a/pixman/test/scaling-test.c +++ b/pixman/test/scaling-test.c @@ -1,291 +1,247 @@ -/* - * Test program, which can detect problems with nearest neighbout scaling - * implementation. Also SRC and OVER opetations tested for 16bpp and 32bpp - * images. - * - * Just run it without any command line arguments, and it will report either - * "scaling test passed" - everything is ok - * "scaling test failed!" - there is some problem - * - * In the case of failure, finding the problem involves the following steps: - * 1. Get the reference 'scaling-test' binary. It makes sense to disable all - * the cpu specific optimizations in pixman and also configure it with - * '--disable-shared' option. Those who are paranoid can also tweak the - * sources to disable all fastpath functions. The resulting binary - * can be renamed to something like 'scaling-test.ref'. - * 2. Compile the buggy binary (also with the '--disable-shared' option). - * 3. Run 'ruby scaling-test-bisect.rb ./scaling-test.ref ./scaling-test' - * 4. Look at the information about failed case (destination buffer content - * will be shown) and try to figure out what is wrong. It is possible - * to use debugging print to stderr in pixman to get more information, - * this does not interfere with the testing script. - */ -#include <assert.h> -#include <stdlib.h> -#include <stdio.h> -#include "utils.h" - -#define MAX_SRC_WIDTH 10 -#define MAX_SRC_HEIGHT 10 -#define MAX_DST_WIDTH 10 -#define MAX_DST_HEIGHT 10 -#define MAX_STRIDE 4 - -/* - * Composite operation with pseudorandom images - */ -uint32_t -test_composite (uint32_t initcrc, - int testnum, - int verbose) -{ - int i; - pixman_image_t * src_img; - pixman_image_t * dst_img; - pixman_transform_t transform; - pixman_region16_t clip; - int src_width, src_height; - int dst_width, dst_height; - int src_stride, dst_stride; - int src_x, src_y; - int dst_x, dst_y; - int src_bpp; - int dst_bpp; - int w, h; - int scale_x = 32768, scale_y = 32768; - int op; - int repeat = 0; - int src_fmt, dst_fmt; - uint32_t * srcbuf; - uint32_t * dstbuf; - uint32_t crc32; - - lcg_srand (testnum); - - src_bpp = (lcg_rand_n (2) == 0) ? 2 : 4; - dst_bpp = (lcg_rand_n (2) == 0) ? 2 : 4; - op = (lcg_rand_n (2) == 0) ? PIXMAN_OP_SRC : PIXMAN_OP_OVER; - - src_width = lcg_rand_n (MAX_SRC_WIDTH) + 1; - src_height = lcg_rand_n (MAX_SRC_HEIGHT) + 1; - dst_width = lcg_rand_n (MAX_DST_WIDTH) + 1; - dst_height = lcg_rand_n (MAX_DST_HEIGHT) + 1; - src_stride = src_width * src_bpp + lcg_rand_n (MAX_STRIDE) * src_bpp; - dst_stride = dst_width * dst_bpp + lcg_rand_n (MAX_STRIDE) * dst_bpp; - - if (src_stride & 3) - src_stride += 2; - - if (dst_stride & 3) - dst_stride += 2; - - src_x = -(src_width / 4) + lcg_rand_n (src_width * 3 / 2); - src_y = -(src_height / 4) + lcg_rand_n (src_height * 3 / 2); - dst_x = -(dst_width / 4) + lcg_rand_n (dst_width * 3 / 2); - dst_y = -(dst_height / 4) + lcg_rand_n (dst_height * 3 / 2); - w = lcg_rand_n (dst_width * 3 / 2 - dst_x); - h = lcg_rand_n (dst_height * 3 / 2 - dst_y); - - srcbuf = (uint32_t *)malloc (src_stride * src_height); - dstbuf = (uint32_t *)malloc (dst_stride * dst_height); - - for (i = 0; i < src_stride * src_height; i++) - *((uint8_t *)srcbuf + i) = lcg_rand_n (256); - - for (i = 0; i < dst_stride * dst_height; i++) - *((uint8_t *)dstbuf + i) = lcg_rand_n (256); - - src_fmt = src_bpp == 4 ? (lcg_rand_n (2) == 0 ? - PIXMAN_a8r8g8b8 : PIXMAN_x8r8g8b8) : PIXMAN_r5g6b5; - - dst_fmt = dst_bpp == 4 ? (lcg_rand_n (2) == 0 ? - PIXMAN_a8r8g8b8 : PIXMAN_x8r8g8b8) : PIXMAN_r5g6b5; - - src_img = pixman_image_create_bits ( - src_fmt, src_width, src_height, srcbuf, src_stride); - - dst_img = pixman_image_create_bits ( - dst_fmt, dst_width, dst_height, dstbuf, dst_stride); - - image_endian_swap (src_img, src_bpp * 8); - image_endian_swap (dst_img, dst_bpp * 8); - - if (lcg_rand_n (8) > 0) - { - scale_x = 32768 + lcg_rand_n (65536); - scale_y = 32768 + lcg_rand_n (65536); - pixman_transform_init_scale (&transform, scale_x, scale_y); - pixman_image_set_transform (src_img, &transform); - } - - switch (lcg_rand_n (4)) - { - case 0: - repeat = PIXMAN_REPEAT_NONE; - break; - - case 1: - repeat = PIXMAN_REPEAT_NORMAL; - break; - - case 2: - repeat = PIXMAN_REPEAT_PAD; - break; - - case 3: - repeat = PIXMAN_REPEAT_REFLECT; - break; - - default: - break; - } - pixman_image_set_repeat (src_img, repeat); - - if (lcg_rand_n (2)) - pixman_image_set_filter (src_img, PIXMAN_FILTER_NEAREST, NULL, 0); - else - pixman_image_set_filter (src_img, PIXMAN_FILTER_BILINEAR, NULL, 0); - - if (verbose) - { - printf ("src_fmt=%08X, dst_fmt=%08X\n", src_fmt, dst_fmt); - printf ("op=%d, scale_x=%d, scale_y=%d, repeat=%d\n", - op, scale_x, scale_y, repeat); - printf ("src_width=%d, src_height=%d, dst_width=%d, dst_height=%d\n", - src_width, src_height, dst_width, dst_height); - printf ("src_x=%d, src_y=%d, dst_x=%d, dst_y=%d\n", - src_x, src_y, dst_x, dst_y); - printf ("w=%d, h=%d\n", w, h); - } - - if (lcg_rand_n (8) == 0) - { - pixman_box16_t clip_boxes[2]; - int n = lcg_rand_n (2) + 1; - - for (i = 0; i < n; i++) - { - clip_boxes[i].x1 = lcg_rand_n (src_width); - clip_boxes[i].y1 = lcg_rand_n (src_height); - clip_boxes[i].x2 = - clip_boxes[i].x1 + lcg_rand_n (src_width - clip_boxes[i].x1); - clip_boxes[i].y2 = - clip_boxes[i].y1 + lcg_rand_n (src_height - clip_boxes[i].y1); - - if (verbose) - { - printf ("source clip box: [%d,%d-%d,%d]\n", - clip_boxes[i].x1, clip_boxes[i].y1, - clip_boxes[i].x2, clip_boxes[i].y2); - } - } - - pixman_region_init_rects (&clip, clip_boxes, n); - pixman_image_set_clip_region (src_img, &clip); - pixman_image_set_source_clipping (src_img, 1); - pixman_region_fini (&clip); - } - - if (lcg_rand_n (8) == 0) - { - pixman_box16_t clip_boxes[2]; - int n = lcg_rand_n (2) + 1; - for (i = 0; i < n; i++) - { - clip_boxes[i].x1 = lcg_rand_n (dst_width); - clip_boxes[i].y1 = lcg_rand_n (dst_height); - clip_boxes[i].x2 = - clip_boxes[i].x1 + lcg_rand_n (dst_width - clip_boxes[i].x1); - clip_boxes[i].y2 = - clip_boxes[i].y1 + lcg_rand_n (dst_height - clip_boxes[i].y1); - - if (verbose) - { - printf ("destination clip box: [%d,%d-%d,%d]\n", - clip_boxes[i].x1, clip_boxes[i].y1, - clip_boxes[i].x2, clip_boxes[i].y2); - } - } - pixman_region_init_rects (&clip, clip_boxes, n); - pixman_image_set_clip_region (dst_img, &clip); - pixman_region_fini (&clip); - } - - pixman_image_composite (op, src_img, NULL, dst_img, - src_x, src_y, 0, 0, dst_x, dst_y, w, h); - - if (dst_fmt == PIXMAN_x8r8g8b8) - { - /* ignore unused part */ - for (i = 0; i < dst_stride * dst_height / 4; i++) - dstbuf[i] &= 0xFFFFFF; - } - - image_endian_swap (dst_img, dst_bpp * 8); - - if (verbose) - { - int j; - - for (i = 0; i < dst_height; i++) - { - for (j = 0; j < dst_stride; j++) - printf ("%02X ", *((uint8_t *)dstbuf + i * dst_stride + j)); - - printf ("\n"); - } - } - - pixman_image_unref (src_img); - pixman_image_unref (dst_img); - - crc32 = compute_crc32 (initcrc, dstbuf, dst_stride * dst_height); - free (srcbuf); - free (dstbuf); - return crc32; -} - -int -main (int argc, char *argv[]) -{ - int i, n = 0; - uint32_t crc = 0; - - pixman_disable_out_of_bounds_workaround (); - - if (argc >= 2) - n = atoi (argv[1]); - - if (n == 0) n = 3000000; - - if (n < 0) - { - crc = test_composite (0, -n, 1); - printf ("crc32=%08X\n", crc); - } - else - { - for (i = 1; i <= n; i++) - crc = test_composite (crc, i, 0); - - printf ("crc32=%08X\n", crc); - - if (n == 3000000) - { - /* predefined value for running with all the fastpath functions disabled */ - /* it needs to be updated every time changes are introduced to this program! */ - - if (crc == 0x2168ACD1) - { - printf ("scaling test passed\n"); - } - else - { - printf ("scaling test failed!\n"); - return 1; - } - } - } - - return 0; -} +/*
+ * Test program, which can detect some problems with nearest neighbour
+ * and bilinear scaling in pixman. Testing is done by running lots
+ * of random SRC and OVER compositing operations a8r8g8b8, x8a8r8g8b8
+ * and r5g6b5 color formats.
+ *
+ * Script 'fuzzer-find-diff.pl' can be used to narrow down the problem in
+ * the case of test failure.
+ */
+#include <assert.h>
+#include <stdlib.h>
+#include <stdio.h>
+#include "utils.h"
+
+#define MAX_SRC_WIDTH 16
+#define MAX_SRC_HEIGHT 16
+#define MAX_DST_WIDTH 16
+#define MAX_DST_HEIGHT 16
+#define MAX_STRIDE 4
+
+/*
+ * Composite operation with pseudorandom images
+ */
+uint32_t
+test_composite (int testnum,
+ int verbose)
+{
+ int i;
+ pixman_image_t * src_img;
+ pixman_image_t * dst_img;
+ pixman_transform_t transform;
+ pixman_region16_t clip;
+ int src_width, src_height;
+ int dst_width, dst_height;
+ int src_stride, dst_stride;
+ int src_x, src_y;
+ int dst_x, dst_y;
+ int src_bpp;
+ int dst_bpp;
+ int w, h;
+ pixman_fixed_t scale_x = 65536, scale_y = 65536;
+ pixman_fixed_t translate_x = 0, translate_y = 0;
+ int op;
+ int repeat = 0;
+ int src_fmt, dst_fmt;
+ uint32_t * srcbuf;
+ uint32_t * dstbuf;
+ uint32_t crc32;
+
+ lcg_srand (testnum);
+
+ src_bpp = (lcg_rand_n (2) == 0) ? 2 : 4;
+ dst_bpp = (lcg_rand_n (2) == 0) ? 2 : 4;
+ op = (lcg_rand_n (2) == 0) ? PIXMAN_OP_SRC : PIXMAN_OP_OVER;
+
+ src_width = lcg_rand_n (MAX_SRC_WIDTH) + 1;
+ src_height = lcg_rand_n (MAX_SRC_HEIGHT) + 1;
+ dst_width = lcg_rand_n (MAX_DST_WIDTH) + 1;
+ dst_height = lcg_rand_n (MAX_DST_HEIGHT) + 1;
+ src_stride = src_width * src_bpp + lcg_rand_n (MAX_STRIDE) * src_bpp;
+ dst_stride = dst_width * dst_bpp + lcg_rand_n (MAX_STRIDE) * dst_bpp;
+
+ if (src_stride & 3)
+ src_stride += 2;
+
+ if (dst_stride & 3)
+ dst_stride += 2;
+
+ src_x = -(src_width / 4) + lcg_rand_n (src_width * 3 / 2);
+ src_y = -(src_height / 4) + lcg_rand_n (src_height * 3 / 2);
+ dst_x = -(dst_width / 4) + lcg_rand_n (dst_width * 3 / 2);
+ dst_y = -(dst_height / 4) + lcg_rand_n (dst_height * 3 / 2);
+ w = lcg_rand_n (dst_width * 3 / 2 - dst_x);
+ h = lcg_rand_n (dst_height * 3 / 2 - dst_y);
+
+ srcbuf = (uint32_t *)malloc (src_stride * src_height);
+ dstbuf = (uint32_t *)malloc (dst_stride * dst_height);
+
+ for (i = 0; i < src_stride * src_height; i++)
+ *((uint8_t *)srcbuf + i) = lcg_rand_n (256);
+
+ for (i = 0; i < dst_stride * dst_height; i++)
+ *((uint8_t *)dstbuf + i) = lcg_rand_n (256);
+
+ src_fmt = src_bpp == 4 ? (lcg_rand_n (2) == 0 ?
+ PIXMAN_a8r8g8b8 : PIXMAN_x8r8g8b8) : PIXMAN_r5g6b5;
+
+ dst_fmt = dst_bpp == 4 ? (lcg_rand_n (2) == 0 ?
+ PIXMAN_a8r8g8b8 : PIXMAN_x8r8g8b8) : PIXMAN_r5g6b5;
+
+ src_img = pixman_image_create_bits (
+ src_fmt, src_width, src_height, srcbuf, src_stride);
+
+ dst_img = pixman_image_create_bits (
+ dst_fmt, dst_width, dst_height, dstbuf, dst_stride);
+
+ image_endian_swap (src_img, src_bpp * 8);
+ image_endian_swap (dst_img, dst_bpp * 8);
+
+ if (lcg_rand_n (8) > 0)
+ {
+ scale_x = -32768 * 3 + lcg_rand_N (65536 * 5);
+ scale_y = -32768 * 3 + lcg_rand_N (65536 * 5);
+ translate_x = lcg_rand_N (65536);
+ translate_y = lcg_rand_N (65536);
+ pixman_transform_init_scale (&transform, scale_x, scale_y);
+ pixman_transform_translate (&transform, NULL, translate_x, translate_y);
+ pixman_image_set_transform (src_img, &transform);
+ }
+
+ switch (lcg_rand_n (4))
+ {
+ case 0:
+ repeat = PIXMAN_REPEAT_NONE;
+ break;
+
+ case 1:
+ repeat = PIXMAN_REPEAT_NORMAL;
+ break;
+
+ case 2:
+ repeat = PIXMAN_REPEAT_PAD;
+ break;
+
+ case 3:
+ repeat = PIXMAN_REPEAT_REFLECT;
+ break;
+
+ default:
+ break;
+ }
+ pixman_image_set_repeat (src_img, repeat);
+
+ if (lcg_rand_n (2))
+ pixman_image_set_filter (src_img, PIXMAN_FILTER_NEAREST, NULL, 0);
+ else
+ pixman_image_set_filter (src_img, PIXMAN_FILTER_BILINEAR, NULL, 0);
+
+ if (verbose)
+ {
+ printf ("src_fmt=%08X, dst_fmt=%08X\n", src_fmt, dst_fmt);
+ printf ("op=%d, scale_x=%d, scale_y=%d, repeat=%d\n",
+ op, scale_x, scale_y, repeat);
+ printf ("translate_x=%d, translate_y=%d\n",
+ translate_x, translate_y);
+ printf ("src_width=%d, src_height=%d, dst_width=%d, dst_height=%d\n",
+ src_width, src_height, dst_width, dst_height);
+ printf ("src_x=%d, src_y=%d, dst_x=%d, dst_y=%d\n",
+ src_x, src_y, dst_x, dst_y);
+ printf ("w=%d, h=%d\n", w, h);
+ }
+
+ if (lcg_rand_n (8) == 0)
+ {
+ pixman_box16_t clip_boxes[2];
+ int n = lcg_rand_n (2) + 1;
+
+ for (i = 0; i < n; i++)
+ {
+ clip_boxes[i].x1 = lcg_rand_n (src_width);
+ clip_boxes[i].y1 = lcg_rand_n (src_height);
+ clip_boxes[i].x2 =
+ clip_boxes[i].x1 + lcg_rand_n (src_width - clip_boxes[i].x1);
+ clip_boxes[i].y2 =
+ clip_boxes[i].y1 + lcg_rand_n (src_height - clip_boxes[i].y1);
+
+ if (verbose)
+ {
+ printf ("source clip box: [%d,%d-%d,%d]\n",
+ clip_boxes[i].x1, clip_boxes[i].y1,
+ clip_boxes[i].x2, clip_boxes[i].y2);
+ }
+ }
+
+ pixman_region_init_rects (&clip, clip_boxes, n);
+ pixman_image_set_clip_region (src_img, &clip);
+ pixman_image_set_source_clipping (src_img, 1);
+ pixman_region_fini (&clip);
+ }
+
+ if (lcg_rand_n (8) == 0)
+ {
+ pixman_box16_t clip_boxes[2];
+ int n = lcg_rand_n (2) + 1;
+ for (i = 0; i < n; i++)
+ {
+ clip_boxes[i].x1 = lcg_rand_n (dst_width);
+ clip_boxes[i].y1 = lcg_rand_n (dst_height);
+ clip_boxes[i].x2 =
+ clip_boxes[i].x1 + lcg_rand_n (dst_width - clip_boxes[i].x1);
+ clip_boxes[i].y2 =
+ clip_boxes[i].y1 + lcg_rand_n (dst_height - clip_boxes[i].y1);
+
+ if (verbose)
+ {
+ printf ("destination clip box: [%d,%d-%d,%d]\n",
+ clip_boxes[i].x1, clip_boxes[i].y1,
+ clip_boxes[i].x2, clip_boxes[i].y2);
+ }
+ }
+ pixman_region_init_rects (&clip, clip_boxes, n);
+ pixman_image_set_clip_region (dst_img, &clip);
+ pixman_region_fini (&clip);
+ }
+
+ pixman_image_composite (op, src_img, NULL, dst_img,
+ src_x, src_y, 0, 0, dst_x, dst_y, w, h);
+
+ if (dst_fmt == PIXMAN_x8r8g8b8)
+ {
+ /* ignore unused part */
+ for (i = 0; i < dst_stride * dst_height / 4; i++)
+ dstbuf[i] &= 0xFFFFFF;
+ }
+
+ image_endian_swap (dst_img, dst_bpp * 8);
+
+ if (verbose)
+ {
+ int j;
+
+ for (i = 0; i < dst_height; i++)
+ {
+ for (j = 0; j < dst_stride; j++)
+ printf ("%02X ", *((uint8_t *)dstbuf + i * dst_stride + j));
+
+ printf ("\n");
+ }
+ }
+
+ pixman_image_unref (src_img);
+ pixman_image_unref (dst_img);
+
+ crc32 = compute_crc32 (0, dstbuf, dst_stride * dst_height);
+ free (srcbuf);
+ free (dstbuf);
+ return crc32;
+}
+
+int
+main (int argc, const char *argv[])
+{
+ pixman_disable_out_of_bounds_workaround ();
+
+ return fuzzer_test_main("scaling", 8000000, 0x7F1AB59F,
+ test_composite, argc, argv);
+}
diff --git a/pixman/test/utils.c b/pixman/test/utils.c index 58cd100e2..4b68debff 100644 --- a/pixman/test/utils.c +++ b/pixman/test/utils.c @@ -1,208 +1,321 @@ -#include "utils.h" - -/* Random number seed - */ - -uint32_t lcg_seed; - -/*----------------------------------------------------------------------------*\ - * CRC-32 version 2.0.0 by Craig Bruce, 2006-04-29. - * - * This program generates the CRC-32 values for the files named in the - * command-line arguments. These are the same CRC-32 values used by GZIP, - * PKZIP, and ZMODEM. The Crc32_ComputeBuf () can also be detached and - * used independently. - * - * THIS PROGRAM IS PUBLIC-DOMAIN SOFTWARE. - * - * Based on the byte-oriented implementation "File Verification Using CRC" - * by Mark R. Nelson in Dr. Dobb's Journal, May 1992, pp. 64-67. - * - * v1.0.0: original release. - * v1.0.1: fixed printf formats. - * v1.0.2: fixed something else. - * v1.0.3: replaced CRC constant table by generator function. - * v1.0.4: reformatted code, made ANSI C. 1994-12-05. - * v2.0.0: rewrote to use memory buffer & static table, 2006-04-29. -\*----------------------------------------------------------------------------*/ - -/*----------------------------------------------------------------------------*\ - * NAME: - * Crc32_ComputeBuf () - computes the CRC-32 value of a memory buffer - * DESCRIPTION: - * Computes or accumulates the CRC-32 value for a memory buffer. - * The 'inCrc32' gives a previously accumulated CRC-32 value to allow - * a CRC to be generated for multiple sequential buffer-fuls of data. - * The 'inCrc32' for the first buffer must be zero. - * ARGUMENTS: - * inCrc32 - accumulated CRC-32 value, must be 0 on first call - * buf - buffer to compute CRC-32 value for - * bufLen - number of bytes in buffer - * RETURNS: - * crc32 - computed CRC-32 value - * ERRORS: - * (no errors are possible) -\*----------------------------------------------------------------------------*/ - -uint32_t -compute_crc32 (uint32_t in_crc32, - const void *buf, - size_t buf_len) -{ - static const uint32_t crc_table[256] = { - 0x00000000, 0x77073096, 0xEE0E612C, 0x990951BA, 0x076DC419, 0x706AF48F, - 0xE963A535, 0x9E6495A3, 0x0EDB8832, 0x79DCB8A4, 0xE0D5E91E, 0x97D2D988, - 0x09B64C2B, 0x7EB17CBD, 0xE7B82D07, 0x90BF1D91, 0x1DB71064, 0x6AB020F2, - 0xF3B97148, 0x84BE41DE, 0x1ADAD47D, 0x6DDDE4EB, 0xF4D4B551, 0x83D385C7, - 0x136C9856, 0x646BA8C0, 0xFD62F97A, 0x8A65C9EC, 0x14015C4F, 0x63066CD9, - 0xFA0F3D63, 0x8D080DF5, 0x3B6E20C8, 0x4C69105E, 0xD56041E4, 0xA2677172, - 0x3C03E4D1, 0x4B04D447, 0xD20D85FD, 0xA50AB56B, 0x35B5A8FA, 0x42B2986C, - 0xDBBBC9D6, 0xACBCF940, 0x32D86CE3, 0x45DF5C75, 0xDCD60DCF, 0xABD13D59, - 0x26D930AC, 0x51DE003A, 0xC8D75180, 0xBFD06116, 0x21B4F4B5, 0x56B3C423, - 0xCFBA9599, 0xB8BDA50F, 0x2802B89E, 0x5F058808, 0xC60CD9B2, 0xB10BE924, - 0x2F6F7C87, 0x58684C11, 0xC1611DAB, 0xB6662D3D, 0x76DC4190, 0x01DB7106, - 0x98D220BC, 0xEFD5102A, 0x71B18589, 0x06B6B51F, 0x9FBFE4A5, 0xE8B8D433, - 0x7807C9A2, 0x0F00F934, 0x9609A88E, 0xE10E9818, 0x7F6A0DBB, 0x086D3D2D, - 0x91646C97, 0xE6635C01, 0x6B6B51F4, 0x1C6C6162, 0x856530D8, 0xF262004E, - 0x6C0695ED, 0x1B01A57B, 0x8208F4C1, 0xF50FC457, 0x65B0D9C6, 0x12B7E950, - 0x8BBEB8EA, 0xFCB9887C, 0x62DD1DDF, 0x15DA2D49, 0x8CD37CF3, 0xFBD44C65, - 0x4DB26158, 0x3AB551CE, 0xA3BC0074, 0xD4BB30E2, 0x4ADFA541, 0x3DD895D7, - 0xA4D1C46D, 0xD3D6F4FB, 0x4369E96A, 0x346ED9FC, 0xAD678846, 0xDA60B8D0, - 0x44042D73, 0x33031DE5, 0xAA0A4C5F, 0xDD0D7CC9, 0x5005713C, 0x270241AA, - 0xBE0B1010, 0xC90C2086, 0x5768B525, 0x206F85B3, 0xB966D409, 0xCE61E49F, - 0x5EDEF90E, 0x29D9C998, 0xB0D09822, 0xC7D7A8B4, 0x59B33D17, 0x2EB40D81, - 0xB7BD5C3B, 0xC0BA6CAD, 0xEDB88320, 0x9ABFB3B6, 0x03B6E20C, 0x74B1D29A, - 0xEAD54739, 0x9DD277AF, 0x04DB2615, 0x73DC1683, 0xE3630B12, 0x94643B84, - 0x0D6D6A3E, 0x7A6A5AA8, 0xE40ECF0B, 0x9309FF9D, 0x0A00AE27, 0x7D079EB1, - 0xF00F9344, 0x8708A3D2, 0x1E01F268, 0x6906C2FE, 0xF762575D, 0x806567CB, - 0x196C3671, 0x6E6B06E7, 0xFED41B76, 0x89D32BE0, 0x10DA7A5A, 0x67DD4ACC, - 0xF9B9DF6F, 0x8EBEEFF9, 0x17B7BE43, 0x60B08ED5, 0xD6D6A3E8, 0xA1D1937E, - 0x38D8C2C4, 0x4FDFF252, 0xD1BB67F1, 0xA6BC5767, 0x3FB506DD, 0x48B2364B, - 0xD80D2BDA, 0xAF0A1B4C, 0x36034AF6, 0x41047A60, 0xDF60EFC3, 0xA867DF55, - 0x316E8EEF, 0x4669BE79, 0xCB61B38C, 0xBC66831A, 0x256FD2A0, 0x5268E236, - 0xCC0C7795, 0xBB0B4703, 0x220216B9, 0x5505262F, 0xC5BA3BBE, 0xB2BD0B28, - 0x2BB45A92, 0x5CB36A04, 0xC2D7FFA7, 0xB5D0CF31, 0x2CD99E8B, 0x5BDEAE1D, - 0x9B64C2B0, 0xEC63F226, 0x756AA39C, 0x026D930A, 0x9C0906A9, 0xEB0E363F, - 0x72076785, 0x05005713, 0x95BF4A82, 0xE2B87A14, 0x7BB12BAE, 0x0CB61B38, - 0x92D28E9B, 0xE5D5BE0D, 0x7CDCEFB7, 0x0BDBDF21, 0x86D3D2D4, 0xF1D4E242, - 0x68DDB3F8, 0x1FDA836E, 0x81BE16CD, 0xF6B9265B, 0x6FB077E1, 0x18B74777, - 0x88085AE6, 0xFF0F6A70, 0x66063BCA, 0x11010B5C, 0x8F659EFF, 0xF862AE69, - 0x616BFFD3, 0x166CCF45, 0xA00AE278, 0xD70DD2EE, 0x4E048354, 0x3903B3C2, - 0xA7672661, 0xD06016F7, 0x4969474D, 0x3E6E77DB, 0xAED16A4A, 0xD9D65ADC, - 0x40DF0B66, 0x37D83BF0, 0xA9BCAE53, 0xDEBB9EC5, 0x47B2CF7F, 0x30B5FFE9, - 0xBDBDF21C, 0xCABAC28A, 0x53B39330, 0x24B4A3A6, 0xBAD03605, 0xCDD70693, - 0x54DE5729, 0x23D967BF, 0xB3667A2E, 0xC4614AB8, 0x5D681B02, 0x2A6F2B94, - 0xB40BBE37, 0xC30C8EA1, 0x5A05DF1B, 0x2D02EF8D - }; - - uint32_t crc32; - unsigned char * byte_buf; - size_t i; - - /* accumulate crc32 for buffer */ - crc32 = in_crc32 ^ 0xFFFFFFFF; - byte_buf = (unsigned char*) buf; - - for (i = 0; i < buf_len; i++) - crc32 = (crc32 >> 8) ^ crc_table[(crc32 ^ byte_buf[i]) & 0xFF]; - - return (crc32 ^ 0xFFFFFFFF); -} - -/* perform endian conversion of pixel data - */ -void -image_endian_swap (pixman_image_t *img, int bpp) -{ - int stride = pixman_image_get_stride (img); - uint32_t *data = pixman_image_get_data (img); - int height = pixman_image_get_height (img); - int i, j; - - /* swap bytes only on big endian systems */ - volatile uint16_t endian_check_var = 0x1234; - if (*(volatile uint8_t *)&endian_check_var != 0x12) - return; - - for (i = 0; i < height; i++) - { - uint8_t *line_data = (uint8_t *)data + stride * i; - /* swap bytes only for 16, 24 and 32 bpp for now */ - switch (bpp) - { - case 1: - for (j = 0; j < stride; j++) - { - line_data[j] = - ((line_data[j] & 0x80) >> 7) | - ((line_data[j] & 0x40) >> 5) | - ((line_data[j] & 0x20) >> 3) | - ((line_data[j] & 0x10) >> 1) | - ((line_data[j] & 0x08) << 1) | - ((line_data[j] & 0x04) << 3) | - ((line_data[j] & 0x02) << 5) | - ((line_data[j] & 0x01) << 7); - } - break; - case 4: - for (j = 0; j < stride; j++) - { - line_data[j] = (line_data[j] >> 4) | (line_data[j] << 4); - } - break; - case 16: - for (j = 0; j + 2 <= stride; j += 2) - { - char t1 = line_data[j + 0]; - char t2 = line_data[j + 1]; - - line_data[j + 1] = t1; - line_data[j + 0] = t2; - } - break; - case 24: - for (j = 0; j + 3 <= stride; j += 3) - { - char t1 = line_data[j + 0]; - char t2 = line_data[j + 1]; - char t3 = line_data[j + 2]; - - line_data[j + 2] = t1; - line_data[j + 1] = t2; - line_data[j + 0] = t3; - } - break; - case 32: - for (j = 0; j + 4 <= stride; j += 4) - { - char t1 = line_data[j + 0]; - char t2 = line_data[j + 1]; - char t3 = line_data[j + 2]; - char t4 = line_data[j + 3]; - - line_data[j + 3] = t1; - line_data[j + 2] = t2; - line_data[j + 1] = t3; - line_data[j + 0] = t4; - } - break; - default: - break; - } - } -} - -uint8_t * -make_random_bytes (int n_bytes) -{ - uint8_t *bytes = malloc (n_bytes); - int i; - - if (!bytes) - return NULL; - - for (i = 0; i < n_bytes; ++i) - bytes[i] = lcg_rand () & 0xff; - - return bytes; -} +#include "utils.h"
+
+/* Random number seed
+ */
+
+uint32_t lcg_seed;
+
+/*----------------------------------------------------------------------------*\
+ * CRC-32 version 2.0.0 by Craig Bruce, 2006-04-29.
+ *
+ * This program generates the CRC-32 values for the files named in the
+ * command-line arguments. These are the same CRC-32 values used by GZIP,
+ * PKZIP, and ZMODEM. The Crc32_ComputeBuf () can also be detached and
+ * used independently.
+ *
+ * THIS PROGRAM IS PUBLIC-DOMAIN SOFTWARE.
+ *
+ * Based on the byte-oriented implementation "File Verification Using CRC"
+ * by Mark R. Nelson in Dr. Dobb's Journal, May 1992, pp. 64-67.
+ *
+ * v1.0.0: original release.
+ * v1.0.1: fixed printf formats.
+ * v1.0.2: fixed something else.
+ * v1.0.3: replaced CRC constant table by generator function.
+ * v1.0.4: reformatted code, made ANSI C. 1994-12-05.
+ * v2.0.0: rewrote to use memory buffer & static table, 2006-04-29.
+\*----------------------------------------------------------------------------*/
+
+/*----------------------------------------------------------------------------*\
+ * NAME:
+ * Crc32_ComputeBuf () - computes the CRC-32 value of a memory buffer
+ * DESCRIPTION:
+ * Computes or accumulates the CRC-32 value for a memory buffer.
+ * The 'inCrc32' gives a previously accumulated CRC-32 value to allow
+ * a CRC to be generated for multiple sequential buffer-fuls of data.
+ * The 'inCrc32' for the first buffer must be zero.
+ * ARGUMENTS:
+ * inCrc32 - accumulated CRC-32 value, must be 0 on first call
+ * buf - buffer to compute CRC-32 value for
+ * bufLen - number of bytes in buffer
+ * RETURNS:
+ * crc32 - computed CRC-32 value
+ * ERRORS:
+ * (no errors are possible)
+\*----------------------------------------------------------------------------*/
+
+uint32_t
+compute_crc32 (uint32_t in_crc32,
+ const void *buf,
+ size_t buf_len)
+{
+ static const uint32_t crc_table[256] = {
+ 0x00000000, 0x77073096, 0xEE0E612C, 0x990951BA, 0x076DC419, 0x706AF48F,
+ 0xE963A535, 0x9E6495A3, 0x0EDB8832, 0x79DCB8A4, 0xE0D5E91E, 0x97D2D988,
+ 0x09B64C2B, 0x7EB17CBD, 0xE7B82D07, 0x90BF1D91, 0x1DB71064, 0x6AB020F2,
+ 0xF3B97148, 0x84BE41DE, 0x1ADAD47D, 0x6DDDE4EB, 0xF4D4B551, 0x83D385C7,
+ 0x136C9856, 0x646BA8C0, 0xFD62F97A, 0x8A65C9EC, 0x14015C4F, 0x63066CD9,
+ 0xFA0F3D63, 0x8D080DF5, 0x3B6E20C8, 0x4C69105E, 0xD56041E4, 0xA2677172,
+ 0x3C03E4D1, 0x4B04D447, 0xD20D85FD, 0xA50AB56B, 0x35B5A8FA, 0x42B2986C,
+ 0xDBBBC9D6, 0xACBCF940, 0x32D86CE3, 0x45DF5C75, 0xDCD60DCF, 0xABD13D59,
+ 0x26D930AC, 0x51DE003A, 0xC8D75180, 0xBFD06116, 0x21B4F4B5, 0x56B3C423,
+ 0xCFBA9599, 0xB8BDA50F, 0x2802B89E, 0x5F058808, 0xC60CD9B2, 0xB10BE924,
+ 0x2F6F7C87, 0x58684C11, 0xC1611DAB, 0xB6662D3D, 0x76DC4190, 0x01DB7106,
+ 0x98D220BC, 0xEFD5102A, 0x71B18589, 0x06B6B51F, 0x9FBFE4A5, 0xE8B8D433,
+ 0x7807C9A2, 0x0F00F934, 0x9609A88E, 0xE10E9818, 0x7F6A0DBB, 0x086D3D2D,
+ 0x91646C97, 0xE6635C01, 0x6B6B51F4, 0x1C6C6162, 0x856530D8, 0xF262004E,
+ 0x6C0695ED, 0x1B01A57B, 0x8208F4C1, 0xF50FC457, 0x65B0D9C6, 0x12B7E950,
+ 0x8BBEB8EA, 0xFCB9887C, 0x62DD1DDF, 0x15DA2D49, 0x8CD37CF3, 0xFBD44C65,
+ 0x4DB26158, 0x3AB551CE, 0xA3BC0074, 0xD4BB30E2, 0x4ADFA541, 0x3DD895D7,
+ 0xA4D1C46D, 0xD3D6F4FB, 0x4369E96A, 0x346ED9FC, 0xAD678846, 0xDA60B8D0,
+ 0x44042D73, 0x33031DE5, 0xAA0A4C5F, 0xDD0D7CC9, 0x5005713C, 0x270241AA,
+ 0xBE0B1010, 0xC90C2086, 0x5768B525, 0x206F85B3, 0xB966D409, 0xCE61E49F,
+ 0x5EDEF90E, 0x29D9C998, 0xB0D09822, 0xC7D7A8B4, 0x59B33D17, 0x2EB40D81,
+ 0xB7BD5C3B, 0xC0BA6CAD, 0xEDB88320, 0x9ABFB3B6, 0x03B6E20C, 0x74B1D29A,
+ 0xEAD54739, 0x9DD277AF, 0x04DB2615, 0x73DC1683, 0xE3630B12, 0x94643B84,
+ 0x0D6D6A3E, 0x7A6A5AA8, 0xE40ECF0B, 0x9309FF9D, 0x0A00AE27, 0x7D079EB1,
+ 0xF00F9344, 0x8708A3D2, 0x1E01F268, 0x6906C2FE, 0xF762575D, 0x806567CB,
+ 0x196C3671, 0x6E6B06E7, 0xFED41B76, 0x89D32BE0, 0x10DA7A5A, 0x67DD4ACC,
+ 0xF9B9DF6F, 0x8EBEEFF9, 0x17B7BE43, 0x60B08ED5, 0xD6D6A3E8, 0xA1D1937E,
+ 0x38D8C2C4, 0x4FDFF252, 0xD1BB67F1, 0xA6BC5767, 0x3FB506DD, 0x48B2364B,
+ 0xD80D2BDA, 0xAF0A1B4C, 0x36034AF6, 0x41047A60, 0xDF60EFC3, 0xA867DF55,
+ 0x316E8EEF, 0x4669BE79, 0xCB61B38C, 0xBC66831A, 0x256FD2A0, 0x5268E236,
+ 0xCC0C7795, 0xBB0B4703, 0x220216B9, 0x5505262F, 0xC5BA3BBE, 0xB2BD0B28,
+ 0x2BB45A92, 0x5CB36A04, 0xC2D7FFA7, 0xB5D0CF31, 0x2CD99E8B, 0x5BDEAE1D,
+ 0x9B64C2B0, 0xEC63F226, 0x756AA39C, 0x026D930A, 0x9C0906A9, 0xEB0E363F,
+ 0x72076785, 0x05005713, 0x95BF4A82, 0xE2B87A14, 0x7BB12BAE, 0x0CB61B38,
+ 0x92D28E9B, 0xE5D5BE0D, 0x7CDCEFB7, 0x0BDBDF21, 0x86D3D2D4, 0xF1D4E242,
+ 0x68DDB3F8, 0x1FDA836E, 0x81BE16CD, 0xF6B9265B, 0x6FB077E1, 0x18B74777,
+ 0x88085AE6, 0xFF0F6A70, 0x66063BCA, 0x11010B5C, 0x8F659EFF, 0xF862AE69,
+ 0x616BFFD3, 0x166CCF45, 0xA00AE278, 0xD70DD2EE, 0x4E048354, 0x3903B3C2,
+ 0xA7672661, 0xD06016F7, 0x4969474D, 0x3E6E77DB, 0xAED16A4A, 0xD9D65ADC,
+ 0x40DF0B66, 0x37D83BF0, 0xA9BCAE53, 0xDEBB9EC5, 0x47B2CF7F, 0x30B5FFE9,
+ 0xBDBDF21C, 0xCABAC28A, 0x53B39330, 0x24B4A3A6, 0xBAD03605, 0xCDD70693,
+ 0x54DE5729, 0x23D967BF, 0xB3667A2E, 0xC4614AB8, 0x5D681B02, 0x2A6F2B94,
+ 0xB40BBE37, 0xC30C8EA1, 0x5A05DF1B, 0x2D02EF8D
+ };
+
+ uint32_t crc32;
+ unsigned char * byte_buf;
+ size_t i;
+
+ /* accumulate crc32 for buffer */
+ crc32 = in_crc32 ^ 0xFFFFFFFF;
+ byte_buf = (unsigned char*) buf;
+
+ for (i = 0; i < buf_len; i++)
+ crc32 = (crc32 >> 8) ^ crc_table[(crc32 ^ byte_buf[i]) & 0xFF];
+
+ return (crc32 ^ 0xFFFFFFFF);
+}
+
+/* perform endian conversion of pixel data
+ */
+void
+image_endian_swap (pixman_image_t *img, int bpp)
+{
+ int stride = pixman_image_get_stride (img);
+ uint32_t *data = pixman_image_get_data (img);
+ int height = pixman_image_get_height (img);
+ int i, j;
+
+ /* swap bytes only on big endian systems */
+ volatile uint16_t endian_check_var = 0x1234;
+ if (*(volatile uint8_t *)&endian_check_var != 0x12)
+ return;
+
+ for (i = 0; i < height; i++)
+ {
+ uint8_t *line_data = (uint8_t *)data + stride * i;
+ /* swap bytes only for 16, 24 and 32 bpp for now */
+ switch (bpp)
+ {
+ case 1:
+ for (j = 0; j < stride; j++)
+ {
+ line_data[j] =
+ ((line_data[j] & 0x80) >> 7) |
+ ((line_data[j] & 0x40) >> 5) |
+ ((line_data[j] & 0x20) >> 3) |
+ ((line_data[j] & 0x10) >> 1) |
+ ((line_data[j] & 0x08) << 1) |
+ ((line_data[j] & 0x04) << 3) |
+ ((line_data[j] & 0x02) << 5) |
+ ((line_data[j] & 0x01) << 7);
+ }
+ break;
+ case 4:
+ for (j = 0; j < stride; j++)
+ {
+ line_data[j] = (line_data[j] >> 4) | (line_data[j] << 4);
+ }
+ break;
+ case 16:
+ for (j = 0; j + 2 <= stride; j += 2)
+ {
+ char t1 = line_data[j + 0];
+ char t2 = line_data[j + 1];
+
+ line_data[j + 1] = t1;
+ line_data[j + 0] = t2;
+ }
+ break;
+ case 24:
+ for (j = 0; j + 3 <= stride; j += 3)
+ {
+ char t1 = line_data[j + 0];
+ char t2 = line_data[j + 1];
+ char t3 = line_data[j + 2];
+
+ line_data[j + 2] = t1;
+ line_data[j + 1] = t2;
+ line_data[j + 0] = t3;
+ }
+ break;
+ case 32:
+ for (j = 0; j + 4 <= stride; j += 4)
+ {
+ char t1 = line_data[j + 0];
+ char t2 = line_data[j + 1];
+ char t3 = line_data[j + 2];
+ char t4 = line_data[j + 3];
+
+ line_data[j + 3] = t1;
+ line_data[j + 2] = t2;
+ line_data[j + 1] = t3;
+ line_data[j + 0] = t4;
+ }
+ break;
+ default:
+ break;
+ }
+ }
+}
+
+uint8_t *
+make_random_bytes (int n_bytes)
+{
+ uint8_t *bytes = malloc (n_bytes);
+ int i;
+
+ if (!bytes)
+ return NULL;
+
+ for (i = 0; i < n_bytes; ++i)
+ bytes[i] = lcg_rand () & 0xff;
+
+ return bytes;
+}
+
+/*
+ * A function, which can be used as a core part of the test programs,
+ * intended to detect various problems with the help of fuzzing input
+ * to pixman API (according to some templates, aka "smart" fuzzing).
+ * Some general information about such testing can be found here:
+ * http://en.wikipedia.org/wiki/Fuzz_testing
+ *
+ * It may help detecting:
+ * - crashes on bad handling of valid or reasonably invalid input to
+ * pixman API.
+ * - deviations from the behavior of older pixman releases.
+ * - deviations from the behavior of the same pixman release, but
+ * configured in a different way (for example with SIMD optimizations
+ * disabled), or running on a different OS or hardware.
+ *
+ * The test is performed by calling a callback function a huge number
+ * of times. The callback function is expected to run some snippet of
+ * pixman code with pseudorandom variations to the data feeded to
+ * pixman API. A result of running each callback function should be
+ * some deterministic value which depends on test number (test number
+ * can be used as a seed for PRNG). When 'verbose' argument is nonzero,
+ * callback function is expected to print to stdout some information
+ * about what it does.
+ *
+ * Return values from many small tests are accumulated together and
+ * used as final checksum, which can be compared to some expected
+ * value. Running the tests not individually, but in a batch helps
+ * to reduce process start overhead and also allows to parallelize
+ * testing and utilize multiple CPU cores.
+ *
+ * The resulting executable can be run without any arguments. In
+ * this case it runs a batch of tests starting from 1 and up to
+ * 'default_number_of_iterations'. The resulting checksum is
+ * compared with 'expected_checksum' and FAIL or PASS verdict
+ * depends on the result of this comparison.
+ *
+ * If the executable is run with 2 numbers provided as command line
+ * arguments, they specify the starting and ending numbers for a test
+ * batch.
+ *
+ * If the executable is run with only one number provided as a command
+ * line argument, then this number is used to call the callback function
+ * once, and also with verbose flag set.
+ */
+int
+fuzzer_test_main (const char *test_name,
+ int default_number_of_iterations,
+ uint32_t expected_checksum,
+ uint32_t (*test_function)(int testnum, int verbose),
+ int argc,
+ const char *argv[])
+{
+ int i, n1 = 1, n2 = 0;
+ uint32_t checksum = 0;
+ int verbose = getenv ("VERBOSE") != NULL;
+
+ if (argc >= 3)
+ {
+ n1 = atoi (argv[1]);
+ n2 = atoi (argv[2]);
+ if (n2 < n1)
+ {
+ printf ("invalid test range\n");
+ return 1;
+ }
+ }
+ else if (argc >= 2)
+ {
+ n2 = atoi (argv[1]);
+ checksum = test_function (n2, 1);
+ printf ("%d: checksum=%08X\n", n2, checksum);
+ return 0;
+ }
+ else
+ {
+ n1 = 1;
+ n2 = default_number_of_iterations;
+ }
+
+#ifdef USE_OPENMP
+ #pragma omp parallel for reduction(+:checksum) default(none) \
+ shared(n1, n2, test_function, verbose)
+#endif
+ for (i = n1; i <= n2; i++)
+ {
+ uint32_t crc = test_function (i, 0);
+ if (verbose)
+ printf ("%d: %08X\n", i, crc);
+ checksum += crc;
+ }
+
+ if (n1 == 1 && n2 == default_number_of_iterations)
+ {
+ if (checksum == expected_checksum)
+ {
+ printf ("%s test passed (checksum=%08X)\n",
+ test_name, checksum);
+ }
+ else
+ {
+ printf ("%s test failed! (checksum=%08X, expected %08X)\n",
+ test_name, checksum, expected_checksum);
+ return 1;
+ }
+ }
+ else
+ {
+ printf ("%d-%d: checksum=%08X\n", n1, n2, checksum);
+ }
+
+ return 0;
+}
diff --git a/pixman/test/utils.h b/pixman/test/utils.h index fb1ccec48..39b49b2c1 100644 --- a/pixman/test/utils.h +++ b/pixman/test/utils.h @@ -1,45 +1,64 @@ -#include <stdlib.h> -#include <config.h> -#include "pixman-private.h" /* For 'inline' definition */ - -/* A primitive pseudorandom number generator, - * taken from POSIX.1-2001 example - */ - -extern uint32_t lcg_seed; - -static inline uint32_t -lcg_rand (void) -{ - lcg_seed = lcg_seed * 1103515245 + 12345; - return ((uint32_t)(lcg_seed / 65536) % 32768); -} - -static inline void -lcg_srand (uint32_t seed) -{ - lcg_seed = seed; -} - -static inline uint32_t -lcg_rand_n (int max) -{ - return lcg_rand () % max; -} - - -/* CRC 32 computation - */ -uint32_t -compute_crc32 (uint32_t in_crc32, - const void *buf, - size_t buf_len); - -/* perform endian conversion of pixel data - */ -void -image_endian_swap (pixman_image_t *img, int bpp); - -/* Generate n_bytes random bytes in malloced memory */ -uint8_t * -make_random_bytes (int n_bytes); +#include <stdlib.h>
+#include <config.h>
+#include "pixman-private.h" /* For 'inline' definition */
+
+/* A primitive pseudorandom number generator,
+ * taken from POSIX.1-2001 example
+ */
+
+extern uint32_t lcg_seed;
+#ifdef USE_OPENMP
+#pragma omp threadprivate(lcg_seed)
+#endif
+
+static inline uint32_t
+lcg_rand (void)
+{
+ lcg_seed = lcg_seed * 1103515245 + 12345;
+ return ((uint32_t)(lcg_seed / 65536) % 32768);
+}
+
+static inline void
+lcg_srand (uint32_t seed)
+{
+ lcg_seed = seed;
+}
+
+static inline uint32_t
+lcg_rand_n (int max)
+{
+ return lcg_rand () % max;
+}
+
+static inline uint32_t
+lcg_rand_N (int max)
+{
+ uint32_t lo = lcg_rand ();
+ uint32_t hi = lcg_rand () << 15;
+ return (lo | hi) % max;
+}
+
+/* CRC 32 computation
+ */
+uint32_t
+compute_crc32 (uint32_t in_crc32,
+ const void *buf,
+ size_t buf_len);
+
+/* perform endian conversion of pixel data
+ */
+void
+image_endian_swap (pixman_image_t *img, int bpp);
+
+/* Generate n_bytes random bytes in malloced memory */
+uint8_t *
+make_random_bytes (int n_bytes);
+
+/* main body of the fuzzer test */
+int
+fuzzer_test_main (const char *test_name,
+ int default_number_of_iterations,
+ uint32_t expected_checksum,
+ uint32_t (*test_function)(int testnum, int verbose),
+ int argc,
+ const char *argv[]);
diff --git a/updategit.bat b/updategit.bat index b10401c28..92f94a6c1 100644 --- a/updategit.bat +++ b/updategit.bat @@ -12,6 +12,7 @@ git clone git://anongit.freedesktop.org/xorg/lib/libfontenc git clone git://anongit.freedesktop.org/xorg/lib/libXinerama
git clone git://anongit.freedesktop.org/xorg/lib/libXau
git clone git://anongit.freedesktop.org/xorg/app/xkbcomp
+git clone git://anongit.freedesktop.org/pixman
:noclone
pushd .
@@ -57,7 +58,11 @@ pushd libXau |& tee /a d:\updategit.log git pull |& tee /a d:\updategit.log
popd
echo Updating xkbcomp |& tee /a d:\updategit.log
-pushd xkbcomp |& tee /a d:\updategit.log
+pushd xkbcomp |& tee /a d:\updategit.log
+git pull |& tee /a d:\updategit.log
+popd
+echo Updating pixman |& tee /a d:\updategit.log
+pushd pixman |& tee /a d:\updategit.log
git pull |& tee /a d:\updategit.log
popd
popd
|