aboutsummaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--xorg-server/dix/devices.c3
-rw-r--r--xorg-server/hw/xfree86/common/xf86.h57
-rw-r--r--xorg-server/hw/xfree86/common/xf86AutoConfig.c248
-rw-r--r--xorg-server/hw/xfree86/common/xf86Bus.c39
-rw-r--r--xorg-server/hw/xfree86/common/xf86Bus.h151
-rw-r--r--xorg-server/hw/xfree86/common/xf86Configure.c2
-rw-r--r--xorg-server/hw/xfree86/common/xf86Helper.c505
-rw-r--r--xorg-server/hw/xfree86/common/xf86Priv.h4
-rw-r--r--xorg-server/hw/xfree86/common/xf86Xinput.c6
-rw-r--r--xorg-server/hw/xfree86/common/xf86pciBus.c746
-rw-r--r--xorg-server/hw/xfree86/common/xf86pciBus.h1
-rw-r--r--xorg-server/hw/xfree86/common/xf86str.h1836
-rw-r--r--xorg-server/hw/xfree86/doc/Makefile.am17
-rw-r--r--xorg-server/hw/xfree86/doc/README.DRI1256
-rw-r--r--xorg-server/hw/xfree86/doc/README.rapidaccess48
-rw-r--r--xorg-server/hw/xfree86/doc/man/xorg.conf.man.pre3
-rw-r--r--xorg-server/hw/xfree86/modes/xf86Crtc.c61
-rw-r--r--xorg-server/hw/xfree86/os-support/bus/Pci.c315
-rw-r--r--xorg-server/hw/xfree86/os-support/bus/Pci.h330
-rw-r--r--xorg-server/hw/xfree86/vbe/vbe.c1
-rw-r--r--xorg-server/hw/xfree86/vbe/vbe.h2
-rw-r--r--xorg-server/mi/midispcur.c2
-rw-r--r--xorg-server/xfixes/cursor.c39
-rw-r--r--xorg-server/xorg-server.pc.in40
24 files changed, 2167 insertions, 3545 deletions
diff --git a/xorg-server/dix/devices.c b/xorg-server/dix/devices.c
index c8b2940bc..58eee47ca 100644
--- a/xorg-server/dix/devices.c
+++ b/xorg-server/dix/devices.c
@@ -463,7 +463,8 @@ ActivateDevice(DeviceIntPtr dev, BOOL sendevent)
/* Initialize memory for sprites. */
if (IsMaster(dev) && dev->spriteInfo->spriteOwner)
- pScreen->DeviceCursorInitialize(dev, pScreen);
+ if (!pScreen->DeviceCursorInitialize(dev, pScreen))
+ ret = BadAlloc;
SendDevicePresenceEvent(dev->id, DeviceAdded);
if (sendevent)
diff --git a/xorg-server/hw/xfree86/common/xf86.h b/xorg-server/hw/xfree86/common/xf86.h
index 2a8b7e0a9..b7a884b2a 100644
--- a/xorg-server/hw/xfree86/common/xf86.h
+++ b/xorg-server/hw/xfree86/common/xf86.h
@@ -41,8 +41,6 @@
#include <dix-config.h>
#endif
-#include <pciaccess.h>
-
#include "xf86str.h"
#include "xf86Opt.h"
#include <X11/Xfuncproto.h>
@@ -62,7 +60,6 @@ extern _X_EXPORT DevPrivateKey xf86CreateRootWindowKey;
extern _X_EXPORT DevPrivateKey xf86PixmapKey;
extern _X_EXPORT ScrnInfoPtr *xf86Screens; /* List of pointers to ScrnInfoRecs */
extern _X_EXPORT const unsigned char byte_reversed[256];
-extern _X_EXPORT Bool pciSlotClaimed;
extern _X_EXPORT Bool fbSlotClaimed;
#if (defined(__sparc__) || defined(__sparc)) && !defined(__OpenBSD__)
extern _X_EXPORT Bool sbusSlotClaimed;
@@ -91,21 +88,39 @@ extern _X_EXPORT Bool VTSwitchEnabled; /* kbd driver */
/* Function Prototypes */
#ifndef _NO_XF86_PROTOTYPES
-/* xf86Bus.c */
+/* PCI related */
+#include <pciaccess.h>
+extern _X_EXPORT Bool pciSlotClaimed;
-extern _X_EXPORT Bool xf86CheckPciSlot( const struct pci_device * );
-extern _X_EXPORT int xf86ClaimPciSlot( struct pci_device *, DriverPtr drvp,
- int chipset, GDevPtr dev, Bool active);
+extern _X_EXPORT Bool xf86CheckPciSlot(const struct pci_device *);
+extern _X_EXPORT int xf86ClaimPciSlot(struct pci_device *, DriverPtr drvp,
+ int chipset, GDevPtr dev, Bool active);
extern _X_EXPORT void xf86UnclaimPciSlot(struct pci_device *);
-extern _X_EXPORT Bool xf86ParsePciBusString(const char *busID, int *bus, int *device,
- int *func);
-extern _X_EXPORT Bool xf86ComparePciBusString(const char *busID, int bus, int device, int func);
+extern _X_EXPORT Bool xf86ParsePciBusString(const char *busID, int *bus,
+ int *device, int *func);
+extern _X_EXPORT Bool xf86ComparePciBusString(const char *busID, int bus,
+ int device, int func);
extern _X_EXPORT void xf86FormatPciBusNumber(int busnum, char *buffer);
+extern _X_EXPORT Bool xf86IsPrimaryPci(struct pci_device * pPci);
+extern _X_EXPORT Bool xf86CheckPciMemBase(struct pci_device * pPci,
+ memType base);
+extern _X_EXPORT struct pci_device * xf86GetPciInfoForEntity(int entityIndex);
+extern _X_EXPORT int xf86MatchPciInstances(const char *driverName,
+ int vendorID, SymTabPtr chipsets, PciChipsets *PCIchipsets,
+ GDevPtr *devList, int numDevs, DriverPtr drvp, int **foundEntities);
+extern _X_EXPORT ScrnInfoPtr xf86ConfigPciEntity(ScrnInfoPtr pScrn,
+ int scrnFlag, int entityIndex,PciChipsets *p_chip, void *dummy,
+ EntityProc init, EntityProc enter, EntityProc leave, pointer private);
+/* Obsolete! don't use */
+extern _X_EXPORT Bool xf86ConfigActivePciEntity(ScrnInfoPtr pScrn,
+ int entityIndex,PciChipsets *p_chip, void *dummy, EntityProc init,
+ EntityProc enter, EntityProc leave, pointer private);
+
+/* xf86Bus.c */
+
extern _X_EXPORT int xf86GetFbInfoForScreen(int scrnIndex);
extern _X_EXPORT int xf86ClaimFbSlot(DriverPtr drvp, int chipset, GDevPtr dev, Bool active);
extern _X_EXPORT int xf86ClaimNoSlot(DriverPtr drvp, int chipset, GDevPtr dev, Bool active);
-extern _X_EXPORT Bool xf86IsPrimaryPci(struct pci_device * pPci);
-/* new RAC */
extern _X_EXPORT Bool xf86DriverHasEntities(DriverPtr drvp);
extern _X_EXPORT void xf86AddEntityToScreen(ScrnInfoPtr pScrn, int entityIndex);
extern _X_EXPORT void xf86SetEntityInstanceForScreen(ScrnInfoPtr pScrn, int entityIndex,
@@ -114,10 +129,8 @@ extern _X_EXPORT int xf86GetNumEntityInstances(int entityIndex);
extern _X_EXPORT GDevPtr xf86GetDevFromEntity(int entityIndex, int instance);
extern _X_EXPORT void xf86RemoveEntityFromScreen(ScrnInfoPtr pScrn, int entityIndex);
extern _X_EXPORT EntityInfoPtr xf86GetEntityInfo(int entityIndex);
-extern _X_EXPORT struct pci_device * xf86GetPciInfoForEntity(int entityIndex);
extern _X_EXPORT Bool xf86SetEntityFuncs(int entityIndex, EntityProc init,
EntityProc enter, EntityProc leave, pointer);
-extern _X_EXPORT Bool xf86CheckPciMemBase(struct pci_device * pPci, memType base);
extern _X_EXPORT Bool xf86IsEntityPrimary(int entityIndex);
extern _X_EXPORT void xf86EnterServerState(xf86State state);
extern _X_EXPORT ScrnInfoPtr xf86FindScreenForEntity(int entityIndex);
@@ -223,10 +236,6 @@ extern _X_EXPORT void xf86ShowClocks(ScrnInfoPtr scrp, MessageType from);
extern _X_EXPORT void xf86PrintChipsets(const char *drvname, const char *drvmsg,
SymTabPtr chips);
extern _X_EXPORT int xf86MatchDevice(const char *drivername, GDevPtr **driversectlist);
-extern _X_EXPORT int xf86MatchPciInstances(const char *driverName, int vendorID,
- SymTabPtr chipsets, PciChipsets *PCIchipsets,
- GDevPtr *devList, int numDevs, DriverPtr drvp,
- int **foundEntities);
extern _X_EXPORT void xf86GetClocks(ScrnInfoPtr pScrn, int num,
Bool (*ClockFunc)(ScrnInfoPtr, int),
void (*ProtectRegs)(ScrnInfoPtr, Bool),
@@ -265,23 +274,11 @@ extern _X_EXPORT void xf86SetSilkenMouse(ScreenPtr pScreen);
extern _X_EXPORT pointer xf86FindXvOptions(int scrnIndex, int adapt_index, char *port_name,
char **adaptor_name, pointer *adaptor_options);
extern _X_EXPORT void xf86GetOS(const char **name, int *major, int *minor, int *teeny);
-extern _X_EXPORT ScrnInfoPtr xf86ConfigPciEntity(ScrnInfoPtr pScrn, int scrnFlag,
- int entityIndex,PciChipsets *p_chip,
- void *dummy, EntityProc init,
- EntityProc enter, EntityProc leave,
- pointer private);
extern _X_EXPORT ScrnInfoPtr xf86ConfigFbEntity(ScrnInfoPtr pScrn, int scrnFlag,
int entityIndex, EntityProc init,
EntityProc enter, EntityProc leave,
pointer private);
-/* Obsolete! don't use */
-extern _X_EXPORT Bool xf86ConfigActivePciEntity(ScrnInfoPtr pScrn,
- int entityIndex,PciChipsets *p_chip,
- void *dummy, EntityProc init,
- EntityProc enter, EntityProc leave,
- pointer private);
-
extern _X_EXPORT Bool xf86IsScreenPrimary(int scrnIndex);
extern _X_EXPORT int xf86RegisterRootWindowProperty(int ScrnIndex, Atom property, Atom type,
int format, unsigned long len,
diff --git a/xorg-server/hw/xfree86/common/xf86AutoConfig.c b/xorg-server/hw/xfree86/common/xf86AutoConfig.c
index 88891e5a7..9f6348681 100644
--- a/xorg-server/hw/xfree86/common/xf86AutoConfig.c
+++ b/xorg-server/hw/xfree86/common/xf86AutoConfig.c
@@ -39,10 +39,10 @@
#include "xf86Config.h"
#include "xf86Priv.h"
#include "xf86_OSlib.h"
+#include "xf86pciBus.h"
#ifdef __sparc__
# include "xf86sbusBus.h"
#endif
-#include "dirent.h"
#ifdef sun
# include <sys/visual_io.h>
@@ -140,102 +140,6 @@ AppendToConfig(const char *s)
AppendToList(s, &builtinConfig, &builtinLines);
}
-static int
-videoPtrToDriverList(struct pci_device *dev,
- char *returnList[], int returnListMax)
-{
- int i;
- /* Add more entries here if we ever return more than 4 drivers for
- any device */
- char *driverList[5] = { NULL, NULL, NULL, NULL, NULL };
-
- switch (dev->vendor_id)
- {
- /* AMD Geode LX */
- case 0x1022:
- if (dev->device_id == 0x2081)
- driverList[0] = "geode";
- break;
- /* older Geode products acquired by AMD still carry an NSC vendor_id */
- case 0x100b:
- if (dev->device_id == 0x0030) {
- /* NSC Geode GX2 specifically */
- driverList[0] = "geode";
- /* GX2 support started its life in the NSC tree and was later
- forked by AMD for GEODE so we keep it as a backup */
- driverList[1] = "nsc";
- } else
- /* other NSC variant e.g. 0x0104 (SC1400), 0x0504 (SCx200) */
- driverList[0] = "nsc";
- break;
- /* Cyrix Geode GX1 */
- case 0x1078:
- if (dev->device_id == 0x0104)
- driverList[0] = "cyrix";
- break;
- case 0x1142: driverList[0] = "apm"; break;
- case 0xedd8: driverList[0] = "ark"; break;
- case 0x1a03: driverList[0] = "ast"; break;
- case 0x1002: driverList[0] = "ati"; break;
- case 0x102c: driverList[0] = "chips"; break;
- case 0x1013: driverList[0] = "cirrus"; break;
- case 0x3d3d: driverList[0] = "glint"; break;
- case 0x105d: driverList[0] = "i128"; break;
- case 0x8086:
- if ((dev->device_id == 0x00d1) || (dev->device_id == 0x7800)) {
- driverList[0] = "i740";
- } else if (dev->device_id == 0x8108) {
- break; /* "hooray" for poulsbo */
- } else {
- driverList[0] = "intel";
- }
- break;
- case 0x102b: driverList[0] = "mga"; break;
- case 0x10c8: driverList[0] = "neomagic"; break;
- case 0x10de: case 0x12d2: driverList[0] = "nv"; break;
- case 0x1106: driverList[0] = "openchrome"; break;
- case 0x1b36: driverList[0] = "qxl"; break;
- case 0x1163: driverList[0] = "rendition"; break;
- case 0x5333:
- switch (dev->device_id)
- {
- case 0x88d0: case 0x88d1: case 0x88f0: case 0x8811:
- case 0x8812: case 0x8814: case 0x8901:
- driverList[0] = "s3"; break;
- case 0x5631: case 0x883d: case 0x8a01: case 0x8a10:
- case 0x8c01: case 0x8c03: case 0x8904: case 0x8a13:
- driverList[0] = "s3virge"; break;
- default:
- driverList[0] = "savage"; break;
- }
- break;
- case 0x1039: driverList[0] = "sis"; break;
- case 0x126f: driverList[0] = "siliconmotion"; break;
- case 0x121a:
- if (dev->device_id < 0x0003)
- driverList[0] = "voodoo";
- else
- driverList[0] = "tdfx";
- break;
- case 0x1011: driverList[0] = "tga"; break;
- case 0x1023: driverList[0] = "trident"; break;
- case 0x100c: driverList[0] = "tseng"; break;
- case 0x80ee: driverList[0] = "vboxvideo"; break;
- case 0x15ad: driverList[0] = "vmware"; break;
- case 0x18ca:
- if (dev->device_id == 0x47)
- driverList[0] = "xgixp";
- else
- driverList[0] = "xgi";
- break;
- default: break;
- }
- for (i = 0; (i < returnListMax) && (driverList[i] != NULL); i++) {
- returnList[i] = xnfstrdup(driverList[i]);
- }
- return i; /* Number of entries added */
-}
-
Bool
xf86AutoConfig(void)
{
@@ -285,132 +189,9 @@ xf86AutoConfig(void)
return (ret == CONFIG_OK);
}
-static int
-xchomp(char *line)
-{
- size_t len = 0;
-
- if (!line) {
- return 1;
- }
-
- len = strlen(line);
- if (line[len - 1] == '\n' && len > 0) {
- line[len - 1] = '\0';
- }
- return 0;
-}
-
-#ifdef __linux__
-/* This function is used to provide a workaround for binary drivers that
- * don't export their PCI ID's properly. If distros don't end up using this
- * feature it can and should be removed because the symbol-based resolution
- * scheme should be the primary one */
-static void
-matchDriverFromFiles (char** matches, uint16_t match_vendor, uint16_t match_chip)
-{
- DIR *idsdir;
- FILE *fp;
- struct dirent *direntry;
- char *line = NULL;
- size_t len;
- ssize_t read;
- char path_name[256], vendor_str[5], chip_str[5];
- uint16_t vendor, chip;
- int i, j;
-
- idsdir = opendir(PCI_TXT_IDS_PATH);
- if (!idsdir)
- return;
-
- xf86Msg(X_INFO, "Scanning %s directory for additional PCI ID's supported by the drivers\n", PCI_TXT_IDS_PATH);
- direntry = readdir(idsdir);
- /* Read the directory */
- while (direntry) {
- if (direntry->d_name[0] == '.') {
- direntry = readdir(idsdir);
- continue;
- }
- len = strlen(direntry->d_name);
- /* A tiny bit of sanity checking. We should probably do better */
- if (strncmp(&(direntry->d_name[len-4]), ".ids", 4) == 0) {
- /* We need the full path name to open the file */
- strncpy(path_name, PCI_TXT_IDS_PATH, 256);
- strncat(path_name, "/", 1);
- strncat(path_name, direntry->d_name, (256 - strlen(path_name) - 1));
- fp = fopen(path_name, "r");
- if (fp == NULL) {
- xf86Msg(X_ERROR, "Could not open %s for reading. Exiting.\n", path_name);
- goto end;
- }
- /* Read the file */
-#ifdef __GLIBC__
- while ((read = getline(&line, &len, fp)) != -1) {
-#else
- while ((line = fgetln(fp, &len)) != (char *)NULL) {
-#endif /* __GLIBC __ */
- xchomp(line);
- if (isdigit(line[0])) {
- strncpy(vendor_str, line, 4);
- vendor_str[4] = '\0';
- vendor = (int)strtol(vendor_str, NULL, 16);
- if ((strlen(&line[4])) == 0) {
- chip_str[0] = '\0';
- chip = -1;
- } else {
- /* Handle trailing whitespace */
- if (isspace(line[4])) {
- chip_str[0] = '\0';
- chip = -1;
- } else {
- /* Ok, it's a real ID */
- strncpy(chip_str, &line[4], 4);
- chip_str[4] = '\0';
- chip = (int)strtol(chip_str, NULL, 16);
- }
- }
- if (vendor == match_vendor && chip == match_chip ) {
- i = 0;
- while (matches[i]) {
- i++;
- }
- matches[i] = (char*)malloc(sizeof(char) * strlen(direntry->d_name) - 3);
- if (!matches[i]) {
- xf86Msg(X_ERROR, "Could not allocate space for the module name. Exiting.\n");
- goto end;
- }
- /* hack off the .ids suffix. This should guard
- * against other problems, but it will end up
- * taking off anything after the first '.' */
- for (j = 0; j < (strlen(direntry->d_name) - 3) ; j++) {
- if (direntry->d_name[j] == '.') {
- matches[i][j] = '\0';
- break;
- } else {
- matches[i][j] = direntry->d_name[j];
- }
- }
- xf86Msg(X_INFO, "Matched %s from file name %s\n", matches[i], direntry->d_name);
- }
- } else {
- /* TODO Handle driver overrides here */
- }
- }
- fclose(fp);
- }
- direntry = readdir(idsdir);
- }
- end:
- free(line);
- closedir(idsdir);
-}
-#endif /* __linux__ */
-
static void
listPossibleVideoDrivers(char *matches[], int nmatches)
{
- struct pci_device * info = NULL;
- struct pci_device_iterator *iter;
int i;
for (i = 0 ; i < nmatches ; i++) {
@@ -476,32 +257,7 @@ listPossibleVideoDrivers(char *matches[], int nmatches)
}
#endif
- /* Find the primary device, and get some information about it. */
- iter = pci_slot_match_iterator_create(NULL);
- while ((info = pci_device_next(iter)) != NULL) {
- if (xf86IsPrimaryPci(info)) {
- break;
- }
- }
-
- pci_iterator_destroy(iter);
-
- if (!info) {
- ErrorF("Primary device is not PCI\n");
- }
-#ifdef __linux__
- else {
- matchDriverFromFiles(matches, info->vendor_id, info->device_id);
- }
-#endif /* __linux__ */
-
- for (i = 0; (i < nmatches) && (matches[i]); i++) {
- /* find end of matches list */
- }
-
- if ((info != NULL) && (i < nmatches)) {
- i += videoPtrToDriverList(info, &(matches[i]), nmatches - i);
- }
+ xf86PciMatchDriver(matches, nmatches);
/* Fallback to platform default hardware */
if (i < (nmatches - 1)) {
diff --git a/xorg-server/hw/xfree86/common/xf86Bus.c b/xorg-server/hw/xfree86/common/xf86Bus.c
index 09b94654c..77693d742 100644
--- a/xorg-server/hw/xfree86/common/xf86Bus.c
+++ b/xorg-server/hw/xfree86/common/xf86Bus.c
@@ -49,8 +49,6 @@
#include "xf86_OSproc.h"
#include "xf86VGAarbiter.h"
-#include "Pci.h"
-
/* Entity data */
EntityPtr *xf86Entities = NULL; /* Bus slots claimed by drivers */
int xf86NumEntities = 0;
@@ -113,10 +111,6 @@ xf86BusConfig(void)
if (xorgHWAccess)
xorgHWAccess = xf86EnableIO();
- /* Locate bus slot that had register IO enabled at server startup */
- if (xorgHWAccess)
- xf86FindPrimaryDevice();
-
/*
* Now call each of the Probe functions. Each successful probe will
* result in an extra entry added to the xf86Screens[] list for each
@@ -559,39 +553,6 @@ xf86PostScreenInit(void)
xf86EnterServerState(OPERATING);
}
-/*
- * xf86FindPrimaryDevice() - Find the display device which
- * was active when the server was started.
- */
-void
-xf86FindPrimaryDevice(void)
-{
- if (primaryBus.type != BUS_NONE) {
- char *bus;
- char loc[16];
-
- switch (primaryBus.type) {
- case BUS_PCI:
- bus = "PCI";
- snprintf(loc, sizeof(loc), " %2.2x@%2.2x:%2.2x:%1.1x",
- primaryBus.id.pci->bus,
- primaryBus.id.pci->domain,
- primaryBus.id.pci->dev,
- primaryBus.id.pci->func);
- break;
- case BUS_SBUS:
- bus = "SBUS";
- snprintf(loc, sizeof(loc), " %2.2x", primaryBus.id.sbus.fbNum);
- break;
- default:
- bus = "";
- loc[0] = '\0';
- }
-
- xf86MsgVerb(X_INFO, 2, "Primary Device is: %s%s\n",bus,loc);
- }
-}
-
int
xf86GetLastScrnFlag(int entityIndex)
{
diff --git a/xorg-server/hw/xfree86/common/xf86Bus.h b/xorg-server/hw/xfree86/common/xf86Bus.h
index b22e2e772..4e3d7d7cb 100644
--- a/xorg-server/hw/xfree86/common/xf86Bus.h
+++ b/xorg-server/hw/xfree86/common/xf86Bus.h
@@ -1,76 +1,75 @@
-/*
- * Copyright (c) 1997-2003 by The XFree86 Project, Inc.
- *
- * Permission is hereby granted, free of charge, to any person obtaining a
- * copy of this software and associated documentation files (the "Software"),
- * to deal in the Software without restriction, including without limitation
- * the rights to use, copy, modify, merge, publish, distribute, sublicense,
- * and/or sell copies of the Software, and to permit persons to whom the
- * Software is furnished to do so, subject to the following conditions:
- *
- * The above copyright notice and this permission notice shall be included in
- * all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
- * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
- * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
- * THE COPYRIGHT HOLDER(S) OR AUTHOR(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR
- * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
- * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- * OTHER DEALINGS IN THE SOFTWARE.
- *
- * Except as contained in this notice, the name of the copyright holder(s)
- * and author(s) shall not be used in advertising or otherwise to promote
- * the sale, use or other dealings in this Software without prior written
- * authorization from the copyright holder(s) and author(s).
- */
-
-/*
- * This file contains definitions of the bus-related data structures/types.
- * Everything contained here is private to xf86Bus.c. In particular the
- * video drivers must not include this file.
- */
-
-#ifdef HAVE_XORG_CONFIG_H
-#include <xorg-config.h>
-#endif
-
-#ifndef _XF86_BUS_H
-#define _XF86_BUS_H
-
-#include "xf86pciBus.h"
-#if defined(__sparc__) || defined(__sparc)
-#include "xf86sbusBus.h"
-#endif
-
-typedef struct {
- DriverPtr driver;
- int chipset;
- int entityProp;
- EntityProc entityInit;
- EntityProc entityEnter;
- EntityProc entityLeave;
- pointer private;
- Bool active;
- Bool inUse;
- BusRec bus;
- pointer busAcc;
- int lastScrnFlag;
- DevUnion * entityPrivates;
- int numInstances;
- GDevPtr * devices;
- IOADDRESS domainIO;
-} EntityRec, *EntityPtr;
-
-#define ACCEL_IS_SHARABLE 0x100
-#define IS_SHARED_ACCEL 0x200
-#define SA_PRIM_INIT_DONE 0x400
-
-extern EntityPtr *xf86Entities;
-extern int xf86NumEntities;
-extern BusRec primaryBus;
-
-int xf86AllocateEntity(void);
-BusType StringToBusType(const char* busID, const char **retID);
-
-#endif /* _XF86_BUS_H */
+/*
+ * Copyright (c) 1997-2003 by The XFree86 Project, Inc.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+ * THE COPYRIGHT HOLDER(S) OR AUTHOR(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR
+ * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
+ * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ *
+ * Except as contained in this notice, the name of the copyright holder(s)
+ * and author(s) shall not be used in advertising or otherwise to promote
+ * the sale, use or other dealings in this Software without prior written
+ * authorization from the copyright holder(s) and author(s).
+ */
+
+/*
+ * This file contains definitions of the bus-related data structures/types.
+ * Everything contained here is private to xf86Bus.c. In particular the
+ * video drivers must not include this file.
+ */
+
+#ifdef HAVE_XORG_CONFIG_H
+#include <xorg-config.h>
+#endif
+
+#ifndef _XF86_BUS_H
+#define _XF86_BUS_H
+
+#include "xf86pciBus.h"
+#if defined(__sparc__) || defined(__sparc)
+#include "xf86sbusBus.h"
+#endif
+
+typedef struct {
+ DriverPtr driver;
+ int chipset;
+ int entityProp;
+ EntityProc entityInit;
+ EntityProc entityEnter;
+ EntityProc entityLeave;
+ pointer private;
+ Bool active;
+ Bool inUse;
+ BusRec bus;
+ int lastScrnFlag;
+ DevUnion * entityPrivates;
+ int numInstances;
+ GDevPtr * devices;
+ IOADDRESS domainIO;
+} EntityRec, *EntityPtr;
+
+#define ACCEL_IS_SHARABLE 0x100
+#define IS_SHARED_ACCEL 0x200
+#define SA_PRIM_INIT_DONE 0x400
+
+extern EntityPtr *xf86Entities;
+extern int xf86NumEntities;
+extern BusRec primaryBus;
+
+int xf86AllocateEntity(void);
+BusType StringToBusType(const char* busID, const char **retID);
+
+#endif /* _XF86_BUS_H */
diff --git a/xorg-server/hw/xfree86/common/xf86Configure.c b/xorg-server/hw/xfree86/common/xf86Configure.c
index 11dfcb848..c2b7464cd 100644
--- a/xorg-server/hw/xfree86/common/xf86Configure.c
+++ b/xorg-server/hw/xfree86/common/xf86Configure.c
@@ -681,8 +681,6 @@ DoConfigure(void)
xorgHWAccess = FALSE;
}
- xf86FindPrimaryDevice();
-
/* Create XF86Config file structure */
xf86config = calloc(1, sizeof(XF86ConfigRec));
diff --git a/xorg-server/hw/xfree86/common/xf86Helper.c b/xorg-server/hw/xfree86/common/xf86Helper.c
index 4cc543fc4..1b9bd1f1e 100644
--- a/xorg-server/hw/xfree86/common/xf86Helper.c
+++ b/xorg-server/hw/xfree86/common/xf86Helper.c
@@ -38,9 +38,6 @@
#include <xorg-config.h>
#endif
-#include <pciaccess.h>
-#include "Pci.h"
-
#include <X11/X.h>
#include "os.h"
#include "servermd.h"
@@ -57,7 +54,6 @@
#include "xf86Xinput.h"
#include "xf86InPriv.h"
#include "mivalidate.h"
-#include "xf86Bus.h"
#include "xf86Crtc.h"
/* For xf86GetClocks */
@@ -1444,8 +1440,6 @@ xf86MatchDevice(const char *drivername, GDevPtr **sectlist)
if (sectlist)
*sectlist = NULL;
- if (xf86DoConfigure && xf86DoConfigurePass1) return 1;
-
/*
* This is a very important function that matches the device sections
* as they show up in the config file with the drivers that the server
@@ -1506,420 +1500,6 @@ xf86MatchDevice(const char *drivername, GDevPtr **sectlist)
return i;
}
-static Bool
-pciDeviceHasBars(struct pci_device *pci)
-{
- int i;
-
- for (i = 0; i < 6; i++)
- if (pci->regions[i].size)
- return TRUE;
-
- if (pci->rom_size)
- return TRUE;
-
- return FALSE;
-}
-
-struct Inst {
- struct pci_device * pci;
- GDevPtr dev;
- Bool foundHW; /* PCIid in list of supported chipsets */
- Bool claimed; /* BusID matches with a device section */
- int chip;
- int screen;
-};
-
-
-/**
- * Find set of unclaimed devices matching a given vendor ID.
- *
- * Used by drivers to find as yet unclaimed devices matching the specified
- * vendor ID.
- *
- * \param driverName Name of the driver. This is used to find Device
- * sections in the config file.
- * \param vendorID PCI vendor ID of associated devices. If zero, then
- * the true vendor ID must be encoded in the \c PCIid
- * fields of the \c PCIchipsets entries.
- * \param chipsets Symbol table used to associate chipset names with
- * PCI IDs.
- * \param devList List of Device sections parsed from the config file.
- * \param numDevs Number of entries in \c devList.
- * \param drvp Pointer the driver's control structure.
- * \param foundEntities Returned list of entity indicies associated with the
- * driver.
- *
- * \returns
- * The number of elements in returned in \c foundEntities on success or zero
- * on failure.
- *
- * \todo
- * This function does a bit more than short description says. Fill in some
- * more of the details of its operation.
- *
- * \todo
- * The \c driverName parameter is redundant. It is the same as
- * \c DriverRec::driverName. In a future version of this function, remove
- * that parameter.
- */
-int
-xf86MatchPciInstances(const char *driverName, int vendorID,
- SymTabPtr chipsets, PciChipsets *PCIchipsets,
- GDevPtr *devList, int numDevs, DriverPtr drvp,
- int **foundEntities)
-{
- int i,j;
- struct pci_device * pPci;
- struct pci_device_iterator *iter;
- struct Inst *instances = NULL;
- int numClaimedInstances = 0;
- int allocatedInstances = 0;
- int numFound = 0;
- SymTabRec *c;
- PciChipsets *id;
- int *retEntities = NULL;
-
- *foundEntities = NULL;
-
-
- /* Each PCI device will contribute at least one entry. Each device
- * section can contribute at most one entry. The sum of the two is
- * guaranteed to be larger than the maximum possible number of entries.
- * Do this calculation and memory allocation once now to eliminate the
- * need for realloc calls inside the loop.
- */
- if (!(xf86DoConfigure && xf86DoConfigurePass1)) {
- unsigned max_entries = numDevs;
-
- iter = pci_slot_match_iterator_create(NULL);
- while ((pPci = pci_device_next(iter)) != NULL) {
- max_entries++;
- }
-
- pci_iterator_destroy(iter);
- instances = xnfalloc(max_entries * sizeof(struct Inst));
- }
-
- iter = pci_slot_match_iterator_create(NULL);
- while ((pPci = pci_device_next(iter)) != NULL) {
- unsigned device_class = pPci->device_class;
- Bool foundVendor = FALSE;
-
-
- /* Convert the pre-PCI 2.0 device class for a VGA adapter to the
- * 2.0 version of the same class.
- */
- if ( device_class == 0x00000101 ) {
- device_class = 0x00030000;
- }
-
-
- /* Find PCI devices that match the given vendor ID. The vendor ID is
- * either specified explicitly as a parameter to the function or
- * implicitly encoded in the high bits of id->PCIid.
- *
- * The first device with a matching vendor is recorded, even if the
- * device ID doesn't match. This is done because the Device section
- * in the xorg.conf file can over-ride the device ID. A matching PCI
- * ID might not be found now, but after the device ID over-ride is
- * applied there /might/ be a match.
- */
- for (id = PCIchipsets; id->PCIid != -1; id++) {
- const unsigned vendor_id = ((id->PCIid & 0xFFFF0000) >> 16)
- | vendorID;
- const unsigned device_id = (id->PCIid & 0x0000FFFF);
- const unsigned match_class = 0x00030000 | id->PCIid;
-
- if ((vendor_id == pPci->vendor_id)
- || ((vendorID == PCI_VENDOR_GENERIC) && (match_class == device_class))) {
- if (!foundVendor && (instances != NULL)) {
- ++allocatedInstances;
- instances[allocatedInstances - 1].pci = pPci;
- instances[allocatedInstances - 1].dev = NULL;
- instances[allocatedInstances - 1].claimed = FALSE;
- instances[allocatedInstances - 1].foundHW = FALSE;
- instances[allocatedInstances - 1].screen = 0;
- }
-
- foundVendor = TRUE;
-
- if ( (device_id == pPci->device_id)
- || ((vendorID == PCI_VENDOR_GENERIC)
- && (match_class == device_class)) ) {
- if ( instances != NULL ) {
- instances[allocatedInstances - 1].foundHW = TRUE;
- instances[allocatedInstances - 1].chip = id->numChipset;
- }
-
-
- if ( xf86DoConfigure && xf86DoConfigurePass1 ) {
- if (xf86CheckPciSlot(pPci)) {
- GDevPtr pGDev =
- xf86AddBusDeviceToConfigure(drvp->driverName,
- BUS_PCI, pPci, -1);
- if (pGDev) {
- /* After configure pass 1, chipID and chipRev
- * are treated as over-rides, so clobber them
- * here.
- */
- pGDev->chipID = -1;
- pGDev->chipRev = -1;
- }
-
- numFound++;
- }
- }
- else {
- numFound++;
- }
-
- break;
- }
- }
- }
- }
-
- pci_iterator_destroy(iter);
-
-
- /* In "probe only" or "configure" mode (signaled by instances being NULL),
- * our work is done. Return the number of detected devices.
- */
- if ( instances == NULL ) {
- return numFound;
- }
-
-
- /*
- * This may be debatable, but if no PCI devices with a matching vendor
- * type is found, return zero now. It is probably not desirable to
- * allow the config file to override this.
- */
- if (allocatedInstances <= 0) {
- free(instances);
- return 0;
- }
-
-
- DebugF("%s instances found: %d\n", driverName, allocatedInstances);
-
- /*
- * Check for devices that need duplicated instances. This is required
- * when there is more than one screen per entity.
- *
- * XXX This currently doesn't work for cases where the BusID isn't
- * specified explicitly in the config file.
- */
-
- for (j = 0; j < numDevs; j++) {
- if (devList[j]->screen > 0 && devList[j]->busID
- && *devList[j]->busID) {
- for (i = 0; i < allocatedInstances; i++) {
- pPci = instances[i].pci;
- if (xf86ComparePciBusString(devList[j]->busID,
- PCI_MAKE_BUS( pPci->domain, pPci->bus ),
- pPci->dev,
- pPci->func)) {
- allocatedInstances++;
- instances[allocatedInstances - 1] = instances[i];
- instances[allocatedInstances - 1].screen =
- devList[j]->screen;
- numFound++;
- break;
- }
- }
- }
- }
-
- for (i = 0; i < allocatedInstances; i++) {
- GDevPtr dev = NULL;
- GDevPtr devBus = NULL;
-
- pPci = instances[i].pci;
- for (j = 0; j < numDevs; j++) {
- if (devList[j]->busID && *devList[j]->busID) {
- if (xf86ComparePciBusString(devList[j]->busID,
- PCI_MAKE_BUS( pPci->domain, pPci->bus ),
- pPci->dev,
- pPci->func) &&
- devList[j]->screen == instances[i].screen) {
-
- if (devBus)
- xf86MsgVerb(X_WARNING,0,
- "%s: More than one matching Device section for "
- "instances\n\t(BusID: %s) found: %s\n",
- driverName, devList[j]->busID,
- devList[j]->identifier);
- else
- devBus = devList[j];
- }
- } else {
- /*
- * if device section without BusID is found
- * only assign to it to the primary device.
- */
- if (xf86IsPrimaryPci(pPci)) {
- xf86Msg(X_PROBED, "Assigning device section with no busID"
- " to primary device\n");
- if (dev || devBus)
- xf86MsgVerb(X_WARNING, 0,
- "%s: More than one matching Device section "
- "found: %s\n", driverName, devList[j]->identifier);
- else
- dev = devList[j];
- }
- }
- }
- if (devBus) dev = devBus; /* busID preferred */
- if (!dev) {
- if (xf86CheckPciSlot(pPci) && pciDeviceHasBars(pPci)) {
- xf86MsgVerb(X_WARNING, 0, "%s: No matching Device section "
- "for instance (BusID PCI:%u@%u:%u:%u) found\n",
- driverName, pPci->domain, pPci->bus, pPci->dev,
- pPci->func);
- }
- } else {
- numClaimedInstances++;
- instances[i].claimed = TRUE;
- instances[i].dev = dev;
- }
- }
- DebugF("%s instances found: %d\n", driverName, numClaimedInstances);
- /*
- * Now check that a chipset or chipID override in the device section
- * is valid. Chipset has precedence over chipID.
- * If chipset is not valid ignore BusSlot completely.
- */
- for (i = 0; i < allocatedInstances && numClaimedInstances > 0; i++) {
- MessageType from = X_PROBED;
-
- if (!instances[i].claimed) {
- continue;
- }
- if (instances[i].dev->chipset) {
- for (c = chipsets; c->token >= 0; c++) {
- if (xf86NameCmp(c->name, instances[i].dev->chipset) == 0)
- break;
- }
- if (c->token == -1) {
- instances[i].claimed = FALSE;
- numClaimedInstances--;
- xf86MsgVerb(X_WARNING, 0, "%s: Chipset \"%s\" in Device "
- "section \"%s\" isn't valid for this driver\n",
- driverName, instances[i].dev->chipset,
- instances[i].dev->identifier);
- } else {
- instances[i].chip = c->token;
-
- for (id = PCIchipsets; id->numChipset >= 0; id++) {
- if (id->numChipset == instances[i].chip)
- break;
- }
- if(id->numChipset >=0){
- xf86Msg(X_CONFIG,"Chipset override: %s\n",
- instances[i].dev->chipset);
- from = X_CONFIG;
- } else {
- instances[i].claimed = FALSE;
- numClaimedInstances--;
- xf86MsgVerb(X_WARNING, 0, "%s: Chipset \"%s\" in Device "
- "section \"%s\" isn't a valid PCI chipset\n",
- driverName, instances[i].dev->chipset,
- instances[i].dev->identifier);
- }
- }
- } else if (instances[i].dev->chipID > 0) {
- for (id = PCIchipsets; id->numChipset >= 0; id++) {
- if (id->PCIid == instances[i].dev->chipID)
- break;
- }
- if (id->numChipset == -1) {
- instances[i].claimed = FALSE;
- numClaimedInstances--;
- xf86MsgVerb(X_WARNING, 0, "%s: ChipID 0x%04X in Device "
- "section \"%s\" isn't valid for this driver\n",
- driverName, instances[i].dev->chipID,
- instances[i].dev->identifier);
- } else {
- instances[i].chip = id->numChipset;
-
- xf86Msg( X_CONFIG,"ChipID override: 0x%04X\n",
- instances[i].dev->chipID);
- from = X_CONFIG;
- }
- } else if (!instances[i].foundHW) {
- /*
- * This means that there was no override and the PCI chipType
- * doesn't match one that is supported
- */
- instances[i].claimed = FALSE;
- numClaimedInstances--;
- }
- if (instances[i].claimed == TRUE){
- for (c = chipsets; c->token >= 0; c++) {
- if (c->token == instances[i].chip)
- break;
- }
- xf86Msg(from,"Chipset %s found\n",
- c->name);
- }
- }
-
- /*
- * Of the claimed instances, check that another driver hasn't already
- * claimed its slot.
- */
- numFound = 0;
- for (i = 0; i < allocatedInstances && numClaimedInstances > 0; i++) {
-
- if (!instances[i].claimed)
- continue;
- pPci = instances[i].pci;
-
-
- /*
- * Allow the same entity to be used more than once for devices with
- * multiple screens per entity. This assumes implicitly that there
- * will be a screen == 0 instance.
- *
- * XXX Need to make sure that two different drivers don't claim
- * the same screen > 0 instance.
- */
- if (instances[i].screen == 0 && !xf86CheckPciSlot( pPci ))
- continue;
-
- DebugF("%s: card at %d:%d:%d is claimed by a Device section\n",
- driverName, pPci->bus, pPci->dev, pPci->func);
-
- /* Allocate an entry in the lists to be returned */
- numFound++;
- retEntities = xnfrealloc(retEntities, numFound * sizeof(int));
- retEntities[numFound - 1] = xf86ClaimPciSlot( pPci, drvp,
- instances[i].chip,
- instances[i].dev,
- instances[i].dev->active);
- if (retEntities[numFound - 1] == -1 && instances[i].screen > 0) {
- for (j = 0; j < xf86NumEntities; j++) {
- EntityPtr pEnt = xf86Entities[j];
- if (pEnt->bus.type != BUS_PCI)
- continue;
- if (pEnt->bus.id.pci == pPci) {
- retEntities[numFound - 1] = j;
- xf86AddDevToEntity(j, instances[i].dev);
- break;
- }
- }
- }
- }
- free(instances);
- if (numFound > 0) {
- *foundEntities = retEntities;
- }
-
- return numFound;
-}
-
/*
* xf86GetClocks -- get the dot-clocks via a BIG BAD hack ...
*/
@@ -2349,28 +1929,6 @@ xf86FindXvOptions(int scrnIndex, int adaptor_index, char *port_name,
#define LoaderGetOS xf86GetOS
#include "loader/os.c"
-/* new RAC */
-/*
- * xf86ConfigPciEntityInactive() -- This function can be used
- * to configure an inactive entity as well as to reconfigure an
- * previously active entity inactive. If the entity has been
- * assigned to a screen before it will be removed. If p_chip is
- * non-NULL all static resources listed there will be registered.
- */
-static void
-xf86ConfigPciEntityInactive(EntityInfoPtr pEnt, PciChipsets *p_chip,
- EntityProc init, EntityProc enter,
- EntityProc leave, pointer private)
-{
- ScrnInfoPtr pScrn;
-
- if ((pScrn = xf86FindScreenForEntity(pEnt->index)))
- xf86RemoveEntityFromScreen(pScrn,pEnt->index);
-
- /* shared resources are only needed when entity is active: remove */
- xf86SetEntityFuncs(pEnt->index,init,enter,leave,private);
-}
-
static void
xf86ConfigFbEntityInactive(EntityInfoPtr pEnt, EntityProc init,
EntityProc enter, EntityProc leave, pointer private)
@@ -2383,42 +1941,6 @@ xf86ConfigFbEntityInactive(EntityInfoPtr pEnt, EntityProc init,
}
ScrnInfoPtr
-xf86ConfigPciEntity(ScrnInfoPtr pScrn, int scrnFlag, int entityIndex,
- PciChipsets *p_chip, void *dummy, EntityProc init,
- EntityProc enter, EntityProc leave, pointer private)
-{
- EntityInfoPtr pEnt = xf86GetEntityInfo(entityIndex);
- if (!pEnt) return pScrn;
-
- if (!(pEnt->location.type == BUS_PCI)
- || !xf86GetPciInfoForEntity(entityIndex)) {
- free(pEnt);
- return pScrn;
- }
- if (!pEnt->active) {
- xf86ConfigPciEntityInactive(pEnt, p_chip, init, enter,
- leave, private);
- free(pEnt);
- return pScrn;
- }
-
- if (!pScrn)
- pScrn = xf86AllocateScreen(pEnt->driver,scrnFlag);
- if (xf86IsEntitySharable(entityIndex)) {
- xf86SetEntityShared(entityIndex);
- }
- xf86AddEntityToScreen(pScrn,entityIndex);
- if (xf86IsEntityShared(entityIndex)) {
- return pScrn;
- }
- free(pEnt);
-
- xf86SetEntityFuncs(entityIndex,init,enter,leave,private);
-
- return pScrn;
-}
-
-ScrnInfoPtr
xf86ConfigFbEntity(ScrnInfoPtr pScrn, int scrnFlag, int entityIndex,
EntityProc init, EntityProc enter, EntityProc leave,
pointer private)
@@ -2446,33 +1968,6 @@ xf86ConfigFbEntity(ScrnInfoPtr pScrn, int scrnFlag, int entityIndex,
return pScrn;
}
-/*
- *
- * OBSOLETE ! xf86ConfigActivePciEntity() is an obsolete function.
- * It is likely to be removed. Don't use!
- */
-
-Bool
-xf86ConfigActivePciEntity(ScrnInfoPtr pScrn, int entityIndex,
- PciChipsets *p_chip, void *dummy, EntityProc init,
- EntityProc enter, EntityProc leave, pointer private)
-{
- EntityInfoPtr pEnt = xf86GetEntityInfo(entityIndex);
- if (!pEnt) return FALSE;
-
- if (!pEnt->active || !(pEnt->location.type == BUS_PCI)) {
- free(pEnt);
- return FALSE;
- }
- xf86AddEntityToScreen(pScrn,entityIndex);
-
- free(pEnt);
- if (!xf86SetEntityFuncs(entityIndex,init,enter,leave,private))
- return FALSE;
-
- return TRUE;
-}
-
Bool
xf86IsScreenPrimary(int scrnIndex)
{
diff --git a/xorg-server/hw/xfree86/common/xf86Priv.h b/xorg-server/hw/xfree86/common/xf86Priv.h
index b0a0f44cc..17fd5aaa9 100644
--- a/xorg-server/hw/xfree86/common/xf86Priv.h
+++ b/xorg-server/hw/xfree86/common/xf86Priv.h
@@ -110,14 +110,10 @@ extern _X_EXPORT RootWinPropPtr *xf86RegisteredPropertiesTable;
#ifndef _NO_XF86_PROTOTYPES
/* xf86Bus.c */
-
extern _X_EXPORT Bool xf86BusConfig(void);
extern _X_EXPORT void xf86BusProbe(void);
extern _X_EXPORT void xf86AccessEnter(void);
extern _X_EXPORT void xf86AccessLeave(void);
-
-extern _X_EXPORT void xf86FindPrimaryDevice(void);
-/* new RAC */
extern _X_EXPORT void xf86PostProbe(void);
extern _X_EXPORT void xf86ClearEntityListForScreen(int scrnIndex);
extern _X_EXPORT void xf86AddDevToEntity(int entityIndex, GDevPtr dev);
diff --git a/xorg-server/hw/xfree86/common/xf86Xinput.c b/xorg-server/hw/xfree86/common/xf86Xinput.c
index f1096f1a5..55cd49c1f 100644
--- a/xorg-server/hw/xfree86/common/xf86Xinput.c
+++ b/xorg-server/hw/xfree86/common/xf86Xinput.c
@@ -551,9 +551,9 @@ InputClassMatches(XF86ConfInputClassPtr iclass, InputAttributes *attrs)
return FALSE;
for (cur = iclass->match_tag, match = FALSE; *cur && !match; cur++) {
- const char *tag;
- for(tag = *attrs->tags; *tag; tag++) {
- if (!strcmp(tag, *cur)) {
+ char * const *tag;
+ for(tag = attrs->tags; *tag; tag++) {
+ if (!strcmp(*tag, *cur)) {
match = TRUE;
break;
}
diff --git a/xorg-server/hw/xfree86/common/xf86pciBus.c b/xorg-server/hw/xfree86/common/xf86pciBus.c
index 925751256..8d968dc39 100644
--- a/xorg-server/hw/xfree86/common/xf86pciBus.c
+++ b/xorg-server/hw/xfree86/common/xf86pciBus.c
@@ -41,6 +41,7 @@
#include "Pci.h"
#include "xf86.h"
#include "xf86Priv.h"
+#include "dirent.h" /* DIR, FILE type definitions */
/* Bus-specific headers */
#include "xf86Bus.h"
@@ -581,3 +582,748 @@ xf86PciIsolateDevice(char *argument)
} else
FatalError("Invalid isolated device specification\n");
}
+
+static Bool
+pciDeviceHasBars(struct pci_device *pci)
+{
+ int i;
+
+ for (i = 0; i < 6; i++)
+ if (pci->regions[i].size)
+ return TRUE;
+
+ if (pci->rom_size)
+ return TRUE;
+
+ return FALSE;
+}
+
+struct Inst {
+ struct pci_device * pci;
+ GDevPtr dev;
+ Bool foundHW; /* PCIid in list of supported chipsets */
+ Bool claimed; /* BusID matches with a device section */
+ int chip;
+ int screen;
+};
+
+
+/**
+ * Find set of unclaimed devices matching a given vendor ID.
+ *
+ * Used by drivers to find as yet unclaimed devices matching the specified
+ * vendor ID.
+ *
+ * \param driverName Name of the driver. This is used to find Device
+ * sections in the config file.
+ * \param vendorID PCI vendor ID of associated devices. If zero, then
+ * the true vendor ID must be encoded in the \c PCIid
+ * fields of the \c PCIchipsets entries.
+ * \param chipsets Symbol table used to associate chipset names with
+ * PCI IDs.
+ * \param devList List of Device sections parsed from the config file.
+ * \param numDevs Number of entries in \c devList.
+ * \param drvp Pointer the driver's control structure.
+ * \param foundEntities Returned list of entity indicies associated with the
+ * driver.
+ *
+ * \returns
+ * The number of elements in returned in \c foundEntities on success or zero
+ * on failure.
+ *
+ * \todo
+ * This function does a bit more than short description says. Fill in some
+ * more of the details of its operation.
+ *
+ * \todo
+ * The \c driverName parameter is redundant. It is the same as
+ * \c DriverRec::driverName. In a future version of this function, remove
+ * that parameter.
+ */
+int
+xf86MatchPciInstances(const char *driverName, int vendorID,
+ SymTabPtr chipsets, PciChipsets *PCIchipsets,
+ GDevPtr *devList, int numDevs, DriverPtr drvp,
+ int **foundEntities)
+{
+ int i,j;
+ struct pci_device * pPci;
+ struct pci_device_iterator *iter;
+ struct Inst *instances = NULL;
+ int numClaimedInstances = 0;
+ int allocatedInstances = 0;
+ int numFound = 0;
+ SymTabRec *c;
+ PciChipsets *id;
+ int *retEntities = NULL;
+
+ *foundEntities = NULL;
+
+
+ /* Each PCI device will contribute at least one entry. Each device
+ * section can contribute at most one entry. The sum of the two is
+ * guaranteed to be larger than the maximum possible number of entries.
+ * Do this calculation and memory allocation once now to eliminate the
+ * need for realloc calls inside the loop.
+ */
+ if (!(xf86DoConfigure && xf86DoConfigurePass1)) {
+ unsigned max_entries = numDevs;
+
+ iter = pci_slot_match_iterator_create(NULL);
+ while ((pPci = pci_device_next(iter)) != NULL) {
+ max_entries++;
+ }
+
+ pci_iterator_destroy(iter);
+ instances = xnfalloc(max_entries * sizeof(struct Inst));
+ }
+
+ iter = pci_slot_match_iterator_create(NULL);
+ while ((pPci = pci_device_next(iter)) != NULL) {
+ unsigned device_class = pPci->device_class;
+ Bool foundVendor = FALSE;
+
+
+ /* Convert the pre-PCI 2.0 device class for a VGA adapter to the
+ * 2.0 version of the same class.
+ */
+ if ( device_class == 0x00000101 ) {
+ device_class = 0x00030000;
+ }
+
+
+ /* Find PCI devices that match the given vendor ID. The vendor ID is
+ * either specified explicitly as a parameter to the function or
+ * implicitly encoded in the high bits of id->PCIid.
+ *
+ * The first device with a matching vendor is recorded, even if the
+ * device ID doesn't match. This is done because the Device section
+ * in the xorg.conf file can over-ride the device ID. A matching PCI
+ * ID might not be found now, but after the device ID over-ride is
+ * applied there /might/ be a match.
+ */
+ for (id = PCIchipsets; id->PCIid != -1; id++) {
+ const unsigned vendor_id = ((id->PCIid & 0xFFFF0000) >> 16)
+ | vendorID;
+ const unsigned device_id = (id->PCIid & 0x0000FFFF);
+ const unsigned match_class = 0x00030000 | id->PCIid;
+
+ if ((vendor_id == pPci->vendor_id)
+ || ((vendorID == PCI_VENDOR_GENERIC) && (match_class == device_class))) {
+ if (!foundVendor && (instances != NULL)) {
+ ++allocatedInstances;
+ instances[allocatedInstances - 1].pci = pPci;
+ instances[allocatedInstances - 1].dev = NULL;
+ instances[allocatedInstances - 1].claimed = FALSE;
+ instances[allocatedInstances - 1].foundHW = FALSE;
+ instances[allocatedInstances - 1].screen = 0;
+ }
+
+ foundVendor = TRUE;
+
+ if ( (device_id == pPci->device_id)
+ || ((vendorID == PCI_VENDOR_GENERIC)
+ && (match_class == device_class)) ) {
+ if ( instances != NULL ) {
+ instances[allocatedInstances - 1].foundHW = TRUE;
+ instances[allocatedInstances - 1].chip = id->numChipset;
+ }
+
+
+ if ( xf86DoConfigure && xf86DoConfigurePass1 ) {
+ if (xf86CheckPciSlot(pPci)) {
+ GDevPtr pGDev =
+ xf86AddBusDeviceToConfigure(drvp->driverName,
+ BUS_PCI, pPci, -1);
+ if (pGDev) {
+ /* After configure pass 1, chipID and chipRev
+ * are treated as over-rides, so clobber them
+ * here.
+ */
+ pGDev->chipID = -1;
+ pGDev->chipRev = -1;
+ }
+
+ numFound++;
+ }
+ }
+ else {
+ numFound++;
+ }
+
+ break;
+ }
+ }
+ }
+ }
+
+ pci_iterator_destroy(iter);
+
+
+ /* In "probe only" or "configure" mode (signaled by instances being NULL),
+ * our work is done. Return the number of detected devices.
+ */
+ if ( instances == NULL ) {
+ return numFound;
+ }
+
+
+ /*
+ * This may be debatable, but if no PCI devices with a matching vendor
+ * type is found, return zero now. It is probably not desirable to
+ * allow the config file to override this.
+ */
+ if (allocatedInstances <= 0) {
+ free(instances);
+ return 0;
+ }
+
+
+ DebugF("%s instances found: %d\n", driverName, allocatedInstances);
+
+ /*
+ * Check for devices that need duplicated instances. This is required
+ * when there is more than one screen per entity.
+ *
+ * XXX This currently doesn't work for cases where the BusID isn't
+ * specified explicitly in the config file.
+ */
+
+ for (j = 0; j < numDevs; j++) {
+ if (devList[j]->screen > 0 && devList[j]->busID
+ && *devList[j]->busID) {
+ for (i = 0; i < allocatedInstances; i++) {
+ pPci = instances[i].pci;
+ if (xf86ComparePciBusString(devList[j]->busID,
+ PCI_MAKE_BUS( pPci->domain, pPci->bus ),
+ pPci->dev,
+ pPci->func)) {
+ allocatedInstances++;
+ instances[allocatedInstances - 1] = instances[i];
+ instances[allocatedInstances - 1].screen = devList[j]->screen;
+ numFound++;
+ break;
+ }
+ }
+ }
+ }
+
+ for (i = 0; i < allocatedInstances; i++) {
+ GDevPtr dev = NULL;
+ GDevPtr devBus = NULL;
+
+ pPci = instances[i].pci;
+ for (j = 0; j < numDevs; j++) {
+ if (devList[j]->busID && *devList[j]->busID) {
+ if (xf86ComparePciBusString(devList[j]->busID,
+ PCI_MAKE_BUS( pPci->domain, pPci->bus ),
+ pPci->dev,
+ pPci->func) &&
+ devList[j]->screen == instances[i].screen) {
+
+ if (devBus)
+ xf86MsgVerb(X_WARNING,0,
+ "%s: More than one matching Device section for "
+ "instances\n\t(BusID: %s) found: %s\n",
+ driverName, devList[j]->busID,
+ devList[j]->identifier);
+ else
+ devBus = devList[j];
+ }
+ } else {
+ /*
+ * if device section without BusID is found
+ * only assign to it to the primary device.
+ */
+ if (xf86IsPrimaryPci(pPci)) {
+ xf86Msg(X_PROBED, "Assigning device section with no busID"
+ " to primary device\n");
+ if (dev || devBus)
+ xf86MsgVerb(X_WARNING, 0,
+ "%s: More than one matching Device section "
+ "found: %s\n", driverName, devList[j]->identifier);
+ else
+ dev = devList[j];
+ }
+ }
+ }
+ if (devBus) dev = devBus; /* busID preferred */
+ if (!dev) {
+ if (xf86CheckPciSlot(pPci) && pciDeviceHasBars(pPci)) {
+ xf86MsgVerb(X_WARNING, 0, "%s: No matching Device section "
+ "for instance (BusID PCI:%u@%u:%u:%u) found\n",
+ driverName, pPci->domain, pPci->bus, pPci->dev,
+ pPci->func);
+ }
+ } else {
+ numClaimedInstances++;
+ instances[i].claimed = TRUE;
+ instances[i].dev = dev;
+ }
+ }
+ DebugF("%s instances found: %d\n", driverName, numClaimedInstances);
+ /*
+ * Now check that a chipset or chipID override in the device section
+ * is valid. Chipset has precedence over chipID.
+ * If chipset is not valid ignore BusSlot completely.
+ */
+ for (i = 0; i < allocatedInstances && numClaimedInstances > 0; i++) {
+ MessageType from = X_PROBED;
+
+ if (!instances[i].claimed) {
+ continue;
+ }
+ if (instances[i].dev->chipset) {
+ for (c = chipsets; c->token >= 0; c++) {
+ if (xf86NameCmp(c->name, instances[i].dev->chipset) == 0)
+ break;
+ }
+ if (c->token == -1) {
+ instances[i].claimed = FALSE;
+ numClaimedInstances--;
+ xf86MsgVerb(X_WARNING, 0, "%s: Chipset \"%s\" in Device "
+ "section \"%s\" isn't valid for this driver\n",
+ driverName, instances[i].dev->chipset,
+ instances[i].dev->identifier);
+ } else {
+ instances[i].chip = c->token;
+
+ for (id = PCIchipsets; id->numChipset >= 0; id++) {
+ if (id->numChipset == instances[i].chip)
+ break;
+ }
+ if(id->numChipset >=0){
+ xf86Msg(X_CONFIG,"Chipset override: %s\n",
+ instances[i].dev->chipset);
+ from = X_CONFIG;
+ } else {
+ instances[i].claimed = FALSE;
+ numClaimedInstances--;
+ xf86MsgVerb(X_WARNING, 0, "%s: Chipset \"%s\" in Device "
+ "section \"%s\" isn't a valid PCI chipset\n",
+ driverName, instances[i].dev->chipset,
+ instances[i].dev->identifier);
+ }
+ }
+ } else if (instances[i].dev->chipID > 0) {
+ for (id = PCIchipsets; id->numChipset >= 0; id++) {
+ if (id->PCIid == instances[i].dev->chipID)
+ break;
+ }
+ if (id->numChipset == -1) {
+ instances[i].claimed = FALSE;
+ numClaimedInstances--;
+ xf86MsgVerb(X_WARNING, 0, "%s: ChipID 0x%04X in Device "
+ "section \"%s\" isn't valid for this driver\n",
+ driverName, instances[i].dev->chipID,
+ instances[i].dev->identifier);
+ } else {
+ instances[i].chip = id->numChipset;
+
+ xf86Msg( X_CONFIG,"ChipID override: 0x%04X\n",
+ instances[i].dev->chipID);
+ from = X_CONFIG;
+ }
+ } else if (!instances[i].foundHW) {
+ /*
+ * This means that there was no override and the PCI chipType
+ * doesn't match one that is supported
+ */
+ instances[i].claimed = FALSE;
+ numClaimedInstances--;
+ }
+ if (instances[i].claimed == TRUE){
+ for (c = chipsets; c->token >= 0; c++) {
+ if (c->token == instances[i].chip)
+ break;
+ }
+ xf86Msg(from,"Chipset %s found\n",
+ c->name);
+ }
+ }
+
+ /*
+ * Of the claimed instances, check that another driver hasn't already
+ * claimed its slot.
+ */
+ numFound = 0;
+ for (i = 0; i < allocatedInstances && numClaimedInstances > 0; i++) {
+ if (!instances[i].claimed)
+ continue;
+ pPci = instances[i].pci;
+
+
+ /*
+ * Allow the same entity to be used more than once for devices with
+ * multiple screens per entity. This assumes implicitly that there
+ * will be a screen == 0 instance.
+ *
+ * XXX Need to make sure that two different drivers don't claim
+ * the same screen > 0 instance.
+ */
+ if (instances[i].screen == 0 && !xf86CheckPciSlot( pPci ))
+ continue;
+
+ DebugF("%s: card at %d:%d:%d is claimed by a Device section\n",
+ driverName, pPci->bus, pPci->dev, pPci->func);
+
+ /* Allocate an entry in the lists to be returned */
+ numFound++;
+ retEntities = xnfrealloc(retEntities, numFound * sizeof(int));
+ retEntities[numFound - 1] = xf86ClaimPciSlot( pPci, drvp,
+ instances[i].chip,
+ instances[i].dev,
+ instances[i].dev->active);
+ if (retEntities[numFound - 1] == -1 && instances[i].screen > 0) {
+ for (j = 0; j < xf86NumEntities; j++) {
+ EntityPtr pEnt = xf86Entities[j];
+ if (pEnt->bus.type != BUS_PCI)
+ continue;
+ if (pEnt->bus.id.pci == pPci) {
+ retEntities[numFound - 1] = j;
+ xf86AddDevToEntity(j, instances[i].dev);
+ break;
+ }
+ }
+ }
+ }
+ free(instances);
+ if (numFound > 0) {
+ *foundEntities = retEntities;
+ }
+
+ return numFound;
+}
+
+/*
+ * xf86ConfigPciEntityInactive() -- This function can be used
+ * to configure an inactive entity as well as to reconfigure an
+ * previously active entity inactive. If the entity has been
+ * assigned to a screen before it will be removed. If p_chip is
+ * non-NULL all static resources listed there will be registered.
+ */
+static void
+xf86ConfigPciEntityInactive(EntityInfoPtr pEnt, PciChipsets *p_chip,
+ EntityProc init, EntityProc enter,
+ EntityProc leave, pointer private)
+{
+ ScrnInfoPtr pScrn;
+
+ if ((pScrn = xf86FindScreenForEntity(pEnt->index)))
+ xf86RemoveEntityFromScreen(pScrn,pEnt->index);
+
+ /* shared resources are only needed when entity is active: remove */
+ xf86SetEntityFuncs(pEnt->index,init,enter,leave,private);
+}
+
+ScrnInfoPtr
+xf86ConfigPciEntity(ScrnInfoPtr pScrn, int scrnFlag, int entityIndex,
+ PciChipsets *p_chip, void *dummy, EntityProc init,
+ EntityProc enter, EntityProc leave, pointer private)
+{
+ EntityInfoPtr pEnt = xf86GetEntityInfo(entityIndex);
+ if (!pEnt) return pScrn;
+
+ if (!(pEnt->location.type == BUS_PCI)
+ || !xf86GetPciInfoForEntity(entityIndex)) {
+ free(pEnt);
+ return pScrn;
+ }
+ if (!pEnt->active) {
+ xf86ConfigPciEntityInactive(pEnt, p_chip, init, enter,
+ leave, private);
+ free(pEnt);
+ return pScrn;
+ }
+
+ if (!pScrn)
+ pScrn = xf86AllocateScreen(pEnt->driver,scrnFlag);
+ if (xf86IsEntitySharable(entityIndex)) {
+ xf86SetEntityShared(entityIndex);
+ }
+ xf86AddEntityToScreen(pScrn,entityIndex);
+ if (xf86IsEntityShared(entityIndex)) {
+ return pScrn;
+ }
+ free(pEnt);
+
+ xf86SetEntityFuncs(entityIndex,init,enter,leave,private);
+
+ return pScrn;
+}
+
+/*
+ * OBSOLETE ! xf86ConfigActivePciEntity() is an obsolete function.
+ * It is likely to be removed. Don't use!
+ */
+Bool
+xf86ConfigActivePciEntity(ScrnInfoPtr pScrn, int entityIndex,
+ PciChipsets *p_chip, void *dummy, EntityProc init,
+ EntityProc enter, EntityProc leave, pointer private)
+{
+ EntityInfoPtr pEnt = xf86GetEntityInfo(entityIndex);
+ if (!pEnt) return FALSE;
+
+ if (!pEnt->active || !(pEnt->location.type == BUS_PCI)) {
+ free(pEnt);
+ return FALSE;
+ }
+ xf86AddEntityToScreen(pScrn,entityIndex);
+
+ free(pEnt);
+ if (!xf86SetEntityFuncs(entityIndex,init,enter,leave,private))
+ return FALSE;
+
+ return TRUE;
+}
+
+static int
+videoPtrToDriverList(struct pci_device *dev,
+ char *returnList[], int returnListMax)
+{
+ int i;
+ /* Add more entries here if we ever return more than 4 drivers for
+ any device */
+ char *driverList[5] = { NULL, NULL, NULL, NULL, NULL };
+
+ switch (dev->vendor_id)
+ {
+ /* AMD Geode LX */
+ case 0x1022:
+ if (dev->device_id == 0x2081)
+ driverList[0] = "geode";
+ break;
+ /* older Geode products acquired by AMD still carry an NSC vendor_id */
+ case 0x100b:
+ if (dev->device_id == 0x0030) {
+ /* NSC Geode GX2 specifically */
+ driverList[0] = "geode";
+ /* GX2 support started its life in the NSC tree and was later
+ forked by AMD for GEODE so we keep it as a backup */
+ driverList[1] = "nsc";
+ } else
+ /* other NSC variant e.g. 0x0104 (SC1400), 0x0504 (SCx200) */
+ driverList[0] = "nsc";
+ break;
+ /* Cyrix Geode GX1 */
+ case 0x1078:
+ if (dev->device_id == 0x0104)
+ driverList[0] = "cyrix";
+ break;
+ case 0x1142: driverList[0] = "apm"; break;
+ case 0xedd8: driverList[0] = "ark"; break;
+ case 0x1a03: driverList[0] = "ast"; break;
+ case 0x1002: driverList[0] = "ati"; break;
+ case 0x102c: driverList[0] = "chips"; break;
+ case 0x1013: driverList[0] = "cirrus"; break;
+ case 0x3d3d: driverList[0] = "glint"; break;
+ case 0x105d: driverList[0] = "i128"; break;
+ case 0x8086:
+ if ((dev->device_id == 0x00d1) || (dev->device_id == 0x7800)) {
+ driverList[0] = "i740";
+ } else if (dev->device_id == 0x8108) {
+ break; /* "hooray" for poulsbo */
+ } else {
+ driverList[0] = "intel";
+ }
+ break;
+ case 0x102b: driverList[0] = "mga"; break;
+ case 0x10c8: driverList[0] = "neomagic"; break;
+ case 0x10de: case 0x12d2: driverList[0] = "nv"; break;
+ case 0x1106: driverList[0] = "openchrome"; break;
+ case 0x1b36: driverList[0] = "qxl"; break;
+ case 0x1163: driverList[0] = "rendition"; break;
+ case 0x5333:
+ switch (dev->device_id)
+ {
+ case 0x88d0: case 0x88d1: case 0x88f0: case 0x8811:
+ case 0x8812: case 0x8814: case 0x8901:
+ driverList[0] = "s3"; break;
+ case 0x5631: case 0x883d: case 0x8a01: case 0x8a10:
+ case 0x8c01: case 0x8c03: case 0x8904: case 0x8a13:
+ driverList[0] = "s3virge"; break;
+ default:
+ driverList[0] = "savage"; break;
+ }
+ break;
+ case 0x1039: driverList[0] = "sis"; break;
+ case 0x126f: driverList[0] = "siliconmotion"; break;
+ case 0x121a:
+ if (dev->device_id < 0x0003)
+ driverList[0] = "voodoo";
+ else
+ driverList[0] = "tdfx";
+ break;
+ case 0x1011: driverList[0] = "tga"; break;
+ case 0x1023: driverList[0] = "trident"; break;
+ case 0x100c: driverList[0] = "tseng"; break;
+ case 0x80ee: driverList[0] = "vboxvideo"; break;
+ case 0x15ad: driverList[0] = "vmware"; break;
+ case 0x18ca:
+ if (dev->device_id == 0x47)
+ driverList[0] = "xgixp";
+ else
+ driverList[0] = "xgi";
+ break;
+ default: break;
+ }
+ for (i = 0; (i < returnListMax) && (driverList[i] != NULL); i++) {
+ returnList[i] = xnfstrdup(driverList[i]);
+ }
+ return i; /* Number of entries added */
+}
+
+static int
+xchomp(char *line)
+{
+ size_t len = 0;
+
+ if (!line) {
+ return 1;
+ }
+
+ len = strlen(line);
+ if (line[len - 1] == '\n' && len > 0) {
+ line[len - 1] = '\0';
+ }
+ return 0;
+}
+
+#ifdef __linux__
+/* This function is used to provide a workaround for binary drivers that
+ * don't export their PCI ID's properly. If distros don't end up using this
+ * feature it can and should be removed because the symbol-based resolution
+ * scheme should be the primary one */
+static void
+matchDriverFromFiles (char** matches, uint16_t match_vendor, uint16_t match_chip)
+{
+ DIR *idsdir;
+ FILE *fp;
+ struct dirent *direntry;
+ char *line = NULL;
+ size_t len;
+ ssize_t read;
+ char path_name[256], vendor_str[5], chip_str[5];
+ uint16_t vendor, chip;
+ int i, j;
+
+ idsdir = opendir(PCI_TXT_IDS_PATH);
+ if (!idsdir)
+ return;
+
+ xf86Msg(X_INFO, "Scanning %s directory for additional PCI ID's supported by the drivers\n", PCI_TXT_IDS_PATH);
+ direntry = readdir(idsdir);
+ /* Read the directory */
+ while (direntry) {
+ if (direntry->d_name[0] == '.') {
+ direntry = readdir(idsdir);
+ continue;
+ }
+ len = strlen(direntry->d_name);
+ /* A tiny bit of sanity checking. We should probably do better */
+ if (strncmp(&(direntry->d_name[len-4]), ".ids", 4) == 0) {
+ /* We need the full path name to open the file */
+ strncpy(path_name, PCI_TXT_IDS_PATH, 256);
+ strncat(path_name, "/", 1);
+ strncat(path_name, direntry->d_name, (256 - strlen(path_name) - 1));
+ fp = fopen(path_name, "r");
+ if (fp == NULL) {
+ xf86Msg(X_ERROR, "Could not open %s for reading. Exiting.\n", path_name);
+ goto end;
+ }
+ /* Read the file */
+#ifdef __GLIBC__
+ while ((read = getline(&line, &len, fp)) != -1) {
+#else
+ while ((line = fgetln(fp, &len)) != (char *)NULL) {
+#endif /* __GLIBC __ */
+ xchomp(line);
+ if (isdigit(line[0])) {
+ strncpy(vendor_str, line, 4);
+ vendor_str[4] = '\0';
+ vendor = (int)strtol(vendor_str, NULL, 16);
+ if ((strlen(&line[4])) == 0) {
+ chip_str[0] = '\0';
+ chip = -1;
+ } else {
+ /* Handle trailing whitespace */
+ if (isspace(line[4])) {
+ chip_str[0] = '\0';
+ chip = -1;
+ } else {
+ /* Ok, it's a real ID */
+ strncpy(chip_str, &line[4], 4);
+ chip_str[4] = '\0';
+ chip = (int)strtol(chip_str, NULL, 16);
+ }
+ }
+ if (vendor == match_vendor && chip == match_chip ) {
+ i = 0;
+ while (matches[i]) {
+ i++;
+ }
+ matches[i] = (char*)malloc(sizeof(char) * strlen(direntry->d_name) - 3);
+ if (!matches[i]) {
+ xf86Msg(X_ERROR, "Could not allocate space for the module name. Exiting.\n");
+ goto end;
+ }
+ /* hack off the .ids suffix. This should guard
+ * against other problems, but it will end up
+ * taking off anything after the first '.' */
+ for (j = 0; j < (strlen(direntry->d_name) - 3) ; j++) {
+ if (direntry->d_name[j] == '.') {
+ matches[i][j] = '\0';
+ break;
+ } else {
+ matches[i][j] = direntry->d_name[j];
+ }
+ }
+ xf86Msg(X_INFO, "Matched %s from file name %s\n", matches[i], direntry->d_name);
+ }
+ } else {
+ /* TODO Handle driver overrides here */
+ }
+ }
+ fclose(fp);
+ }
+ direntry = readdir(idsdir);
+ }
+ end:
+ free(line);
+ closedir(idsdir);
+}
+#endif /* __linux__ */
+
+void
+xf86PciMatchDriver(char* matches[], int nmatches) {
+ int i;
+ struct pci_device * info = NULL;
+ struct pci_device_iterator *iter;
+
+ /* Find the primary device, and get some information about it. */
+ iter = pci_slot_match_iterator_create(NULL);
+ while ((info = pci_device_next(iter)) != NULL) {
+ if (xf86IsPrimaryPci(info)) {
+ break;
+ }
+ }
+
+ pci_iterator_destroy(iter);
+
+ if (!info) {
+ ErrorF("Primary device is not PCI\n");
+ }
+#ifdef __linux__
+ else {
+ matchDriverFromFiles(matches, info->vendor_id, info->device_id);
+ }
+#endif /* __linux__ */
+
+ for (i = 0; (i < nmatches) && (matches[i]); i++) {
+ /* find end of matches list */
+ }
+
+ if ((info != NULL) && (i < nmatches)) {
+ i += videoPtrToDriverList(info, &(matches[i]), nmatches - i);
+ }
+}
diff --git a/xorg-server/hw/xfree86/common/xf86pciBus.h b/xorg-server/hw/xfree86/common/xf86pciBus.h
index b534645ee..c8a2eebdd 100644
--- a/xorg-server/hw/xfree86/common/xf86pciBus.h
+++ b/xorg-server/hw/xfree86/common/xf86pciBus.h
@@ -37,5 +37,6 @@ void xf86PciProbe(void);
Bool xf86PciAddMatchingDev(DriverPtr drvp);
Bool xf86PciProbeDev(DriverPtr drvp);
void xf86PciIsolateDevice(char *argument);
+void xf86PciMatchDriver(char* matches[], int nmatches);
#endif /* _XF86_PCI_BUS_H */
diff --git a/xorg-server/hw/xfree86/common/xf86str.h b/xorg-server/hw/xfree86/common/xf86str.h
index de1f1b60a..c4fbe0403 100644
--- a/xorg-server/hw/xfree86/common/xf86str.h
+++ b/xorg-server/hw/xfree86/common/xf86str.h
@@ -1,919 +1,917 @@
-
-/*
- * Copyright (c) 1997-2003 by The XFree86 Project, Inc.
- *
- * Permission is hereby granted, free of charge, to any person obtaining a
- * copy of this software and associated documentation files (the "Software"),
- * to deal in the Software without restriction, including without limitation
- * the rights to use, copy, modify, merge, publish, distribute, sublicense,
- * and/or sell copies of the Software, and to permit persons to whom the
- * Software is furnished to do so, subject to the following conditions:
- *
- * The above copyright notice and this permission notice shall be included in
- * all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
- * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
- * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
- * THE COPYRIGHT HOLDER(S) OR AUTHOR(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR
- * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
- * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- * OTHER DEALINGS IN THE SOFTWARE.
- *
- * Except as contained in this notice, the name of the copyright holder(s)
- * and author(s) shall not be used in advertising or otherwise to promote
- * the sale, use or other dealings in this Software without prior written
- * authorization from the copyright holder(s) and author(s).
- */
-
-/*
- * This file contains definitions of the public XFree86 data structures/types.
- * Any data structures that video drivers need to access should go here.
- */
-
-#ifndef _XF86STR_H
-#define _XF86STR_H
-
-#include "misc.h"
-#include "input.h"
-#include "scrnintstr.h"
-#include "pixmapstr.h"
-#include "colormapst.h"
-#include "xf86Module.h"
-#include "xf86Opt.h"
-#include "xf86Pci.h"
-
-#include <pciaccess.h>
-
-/**
- * Integer type that is of the size of the addressable memory (machine size).
- * On most platforms \c uintptr_t will suffice. However, on some mixed
- * 32-bit / 64-bit platforms, such as 32-bit binaries on 64-bit PowerPC, this
- * must be 64-bits.
- */
-#include <inttypes.h>
-#if defined(__powerpc__)
-typedef uint64_t memType;
-#else
-typedef uintptr_t memType;
-#endif
-
-
-/* Video mode flags */
-
-typedef enum {
- V_PHSYNC = 0x0001,
- V_NHSYNC = 0x0002,
- V_PVSYNC = 0x0004,
- V_NVSYNC = 0x0008,
- V_INTERLACE = 0x0010,
- V_DBLSCAN = 0x0020,
- V_CSYNC = 0x0040,
- V_PCSYNC = 0x0080,
- V_NCSYNC = 0x0100,
- V_HSKEW = 0x0200, /* hskew provided */
- V_BCAST = 0x0400,
- V_PIXMUX = 0x1000,
- V_DBLCLK = 0x2000,
- V_CLKDIV2 = 0x4000
-} ModeFlags;
-
-typedef enum {
- INTERLACE_HALVE_V = 0x0001 /* Halve V values for interlacing */
-} CrtcAdjustFlags;
-
-/* Flags passed to ChipValidMode() */
-typedef enum {
- MODECHECK_INITIAL = 0,
- MODECHECK_FINAL = 1
-} ModeCheckFlags;
-
-/* These are possible return values for xf86CheckMode() and ValidMode() */
-typedef enum {
- MODE_OK = 0, /* Mode OK */
- MODE_HSYNC, /* hsync out of range */
- MODE_VSYNC, /* vsync out of range */
- MODE_H_ILLEGAL, /* mode has illegal horizontal timings */
- MODE_V_ILLEGAL, /* mode has illegal horizontal timings */
- MODE_BAD_WIDTH, /* requires an unsupported linepitch */
- MODE_NOMODE, /* no mode with a maching name */
- MODE_NO_INTERLACE, /* interlaced mode not supported */
- MODE_NO_DBLESCAN, /* doublescan mode not supported */
- MODE_NO_VSCAN, /* multiscan mode not supported */
- MODE_MEM, /* insufficient video memory */
- MODE_VIRTUAL_X, /* mode width too large for specified virtual size */
- MODE_VIRTUAL_Y, /* mode height too large for specified virtual size */
- MODE_MEM_VIRT, /* insufficient video memory given virtual size */
- MODE_NOCLOCK, /* no fixed clock available */
- MODE_CLOCK_HIGH, /* clock required is too high */
- MODE_CLOCK_LOW, /* clock required is too low */
- MODE_CLOCK_RANGE, /* clock/mode isn't in a ClockRange */
- MODE_BAD_HVALUE, /* horizontal timing was out of range */
- MODE_BAD_VVALUE, /* vertical timing was out of range */
- MODE_BAD_VSCAN, /* VScan value out of range */
- MODE_HSYNC_NARROW, /* horizontal sync too narrow */
- MODE_HSYNC_WIDE, /* horizontal sync too wide */
- MODE_HBLANK_NARROW, /* horizontal blanking too narrow */
- MODE_HBLANK_WIDE, /* horizontal blanking too wide */
- MODE_VSYNC_NARROW, /* vertical sync too narrow */
- MODE_VSYNC_WIDE, /* vertical sync too wide */
- MODE_VBLANK_NARROW, /* vertical blanking too narrow */
- MODE_VBLANK_WIDE, /* vertical blanking too wide */
- MODE_PANEL, /* exceeds panel dimensions */
- MODE_INTERLACE_WIDTH, /* width too large for interlaced mode */
- MODE_ONE_WIDTH, /* only one width is supported */
- MODE_ONE_HEIGHT, /* only one height is supported */
- MODE_ONE_SIZE, /* only one resolution is supported */
- MODE_NO_REDUCED, /* monitor doesn't accept reduced blanking */
- MODE_BANDWIDTH, /* mode requires too much memory bandwidth */
- MODE_BAD = -2, /* unspecified reason */
- MODE_ERROR = -1 /* error condition */
-} ModeStatus;
-
-/*
- * The mode sets are, from best to worst: USERDEF, DRIVER, and DEFAULT/BUILTIN.
- * Preferred will bubble a mode to the top within a set.
- */
-# define M_T_BUILTIN 0x01 /* built-in mode */
-# define M_T_CLOCK_C (0x02 | M_T_BUILTIN) /* built-in mode - configure clock */
-# define M_T_CRTC_C (0x04 | M_T_BUILTIN) /* built-in mode - configure CRTC */
-# define M_T_CLOCK_CRTC_C (M_T_CLOCK_C | M_T_CRTC_C)
- /* built-in mode - configure CRTC and clock */
-# define M_T_PREFERRED 0x08 /* preferred mode within a set */
-# define M_T_DEFAULT 0x10 /* (VESA) default modes */
-# define M_T_USERDEF 0x20 /* One of the modes from the config file */
-# define M_T_DRIVER 0x40 /* Supplied by the driver (EDID, etc) */
-# define M_T_USERPREF 0x80 /* mode preferred by the user config */
-
-/* Video mode */
-typedef struct _DisplayModeRec {
- struct _DisplayModeRec * prev;
- struct _DisplayModeRec * next;
- char * name; /* identifier for the mode */
- ModeStatus status;
- int type;
-
- /* These are the values that the user sees/provides */
- int Clock; /* pixel clock freq (kHz) */
- int HDisplay; /* horizontal timing */
- int HSyncStart;
- int HSyncEnd;
- int HTotal;
- int HSkew;
- int VDisplay; /* vertical timing */
- int VSyncStart;
- int VSyncEnd;
- int VTotal;
- int VScan;
- int Flags;
-
- /* These are the values the hardware uses */
- int ClockIndex;
- int SynthClock; /* Actual clock freq to
- * be programmed (kHz) */
- int CrtcHDisplay;
- int CrtcHBlankStart;
- int CrtcHSyncStart;
- int CrtcHSyncEnd;
- int CrtcHBlankEnd;
- int CrtcHTotal;
- int CrtcHSkew;
- int CrtcVDisplay;
- int CrtcVBlankStart;
- int CrtcVSyncStart;
- int CrtcVSyncEnd;
- int CrtcVBlankEnd;
- int CrtcVTotal;
- Bool CrtcHAdjusted;
- Bool CrtcVAdjusted;
- int PrivSize;
- INT32 * Private;
- int PrivFlags;
-
- float HSync, VRefresh;
-} DisplayModeRec, *DisplayModePtr;
-
-/* The monitor description */
-
-#define MAX_HSYNC 8
-#define MAX_VREFRESH 8
-
-typedef struct { float hi, lo; } range;
-
-typedef struct { CARD32 red, green, blue; } rgb;
-
-typedef struct { float red, green, blue; } Gamma;
-
-/* The permitted gamma range is 1 / GAMMA_MAX <= g <= GAMMA_MAX */
-#define GAMMA_MAX 10.0
-#define GAMMA_MIN (1.0 / GAMMA_MAX)
-#define GAMMA_ZERO (GAMMA_MIN / 100.0)
-
-typedef struct {
- char * id;
- char * vendor;
- char * model;
- int nHsync;
- range hsync[MAX_HSYNC];
- int nVrefresh;
- range vrefresh[MAX_VREFRESH];
- DisplayModePtr Modes; /* Start of the monitor's mode list */
- DisplayModePtr Last; /* End of the monitor's mode list */
- Gamma gamma; /* Gamma of the monitor */
- int widthmm;
- int heightmm;
- pointer options;
- pointer DDC;
- Bool reducedblanking; /* Allow CVT reduced blanking modes? */
- int maxPixClock; /* in kHz, like mode->Clock */
-} MonRec, *MonPtr;
-
-/* the list of clock ranges */
-typedef struct x_ClockRange {
- struct x_ClockRange *next;
- int minClock; /* (kHz) */
- int maxClock; /* (kHz) */
- int clockIndex; /* -1 for programmable clocks */
- Bool interlaceAllowed;
- Bool doubleScanAllowed;
- int ClockMulFactor;
- int ClockDivFactor;
- int PrivFlags;
-} ClockRange, *ClockRangePtr;
-
-/*
- * The driverFunc. xorgDriverFuncOp specifies the action driver should
- * perform. If requested option is not supported function should return
- * FALSE. pointer can be used to pass arguments to the function or
- * to return data to the caller.
- */
-typedef struct _ScrnInfoRec *ScrnInfoPtr;
-
-/* do not change order */
-typedef enum {
- RR_GET_INFO,
- RR_SET_CONFIG,
- RR_GET_MODE_MM,
- GET_REQUIRED_HW_INTERFACES = 10
-} xorgDriverFuncOp;
-
-typedef Bool xorgDriverFuncProc (ScrnInfoPtr, xorgDriverFuncOp,
- pointer);
-
-/* RR_GET_INFO, RR_SET_CONFIG */
-typedef struct {
- int rotation;
- int rate;
- int width;
- int height;
-} xorgRRConfig;
-
-typedef union {
- short RRRotations;
- xorgRRConfig RRConfig;
-} xorgRRRotation, *xorgRRRotationPtr;
-
-/* RR_GET_MODE_MM */
-typedef struct {
- DisplayModePtr mode;
- int virtX;
- int virtY;
- int mmWidth;
- int mmHeight;
-} xorgRRModeMM, *xorgRRModeMMPtr;
-
-/* GET_REQUIRED_HW_INTERFACES */
-#define HW_IO 1
-#define HW_MMIO 2
-#define HW_SKIP_CONSOLE 4
-#define NEED_IO_ENABLED(x) (x & HW_IO)
-
-typedef CARD32 xorgHWFlags;
-
-/*
- * The driver list struct. This contains the information required for each
- * driver before a ScrnInfoRec has been allocated.
- */
-struct _DriverRec;
-
-typedef struct {
- int driverVersion;
- char * driverName;
- void (*Identify)(int flags);
- Bool (*Probe)(struct _DriverRec *drv, int flags);
- const OptionInfoRec * (*AvailableOptions)(int chipid, int bustype);
- pointer module;
- int refCount;
-} DriverRec1;
-
-struct _SymTabRec;
-struct _PciChipsets;
-
-typedef struct _DriverRec {
- int driverVersion;
- char * driverName;
- void (*Identify)(int flags);
- Bool (*Probe)(struct _DriverRec *drv, int flags);
- const OptionInfoRec * (*AvailableOptions)(int chipid, int bustype);
- pointer module;
- int refCount;
- xorgDriverFuncProc *driverFunc;
-
- const struct pci_id_match * supported_devices;
- Bool (*PciProbe)( struct _DriverRec * drv, int entity_num,
- struct pci_device * dev, intptr_t match_data );
-} DriverRec, *DriverPtr;
-
-/*
- * AddDriver flags
- */
-#define HaveDriverFuncs 1
-
-/*
- * These are the private bus types. New types can be added here. Types
- * required for the public interface should be added to xf86str.h, with
- * function prototypes added to xf86.h.
- */
-
-/* Tolerate prior #include <linux/input.h> */
-#if defined(linux) && defined(_INPUT_H)
-#undef BUS_NONE
-#undef BUS_ISA
-#undef BUS_PCI
-#undef BUS_SBUS
-#undef BUS_last
-#endif
-
-typedef enum {
- BUS_NONE,
- BUS_ISA,
- BUS_PCI,
- BUS_SBUS,
- BUS_last /* Keep last */
-} BusType;
-
-struct pci_device;
-
-typedef struct {
- int fbNum;
-} SbusBusId;
-
-typedef struct _bus {
- BusType type;
- union {
- struct pci_device *pci;
- SbusBusId sbus;
- } id;
-} BusRec, *BusPtr;
-
-#define MAXCLOCKS 128
-typedef enum {
- DAC_BPP8 = 0,
- DAC_BPP16,
- DAC_BPP24,
- DAC_BPP32,
- MAXDACSPEEDS
-} DacSpeedIndex;
-
-typedef struct {
- char * identifier;
- char * vendor;
- char * board;
- char * chipset;
- char * ramdac;
- char * driver;
- struct _confscreenrec * myScreenSection;
- Bool claimed;
- int dacSpeeds[MAXDACSPEEDS];
- int numclocks;
- int clock[MAXCLOCKS];
- char * clockchip;
- char * busID;
- Bool active;
- Bool inUse;
- int videoRam;
- int textClockFreq;
- unsigned long BiosBase; /* Base address of video BIOS */
- unsigned long MemBase; /* Frame buffer base address */
- unsigned long IOBase;
- int chipID;
- int chipRev;
- pointer options;
- int irq;
- int screen; /* For multi-CRTC cards */
-} GDevRec, *GDevPtr;
-
-typedef struct {
- char * identifier;
- char * driver;
- pointer commonOptions;
- pointer extraOptions;
-} IDevRec, *IDevPtr;
-
-typedef struct {
- int frameX0;
- int frameY0;
- int virtualX;
- int virtualY;
- int depth;
- int fbbpp;
- rgb weight;
- rgb blackColour;
- rgb whiteColour;
- int defaultVisual;
- char ** modes;
- pointer options;
-} DispRec, *DispPtr;
-
-typedef struct _confxvportrec {
- char * identifier;
- pointer options;
-} confXvPortRec, *confXvPortPtr;
-
-typedef struct _confxvadaptrec {
- char * identifier;
- int numports;
- confXvPortPtr ports;
- pointer options;
-} confXvAdaptorRec, *confXvAdaptorPtr;
-
-typedef struct _confscreenrec {
- char * id;
- int screennum;
- int defaultdepth;
- int defaultbpp;
- int defaultfbbpp;
- MonPtr monitor;
- GDevPtr device;
- int numdisplays;
- DispPtr displays;
- int numxvadaptors;
- confXvAdaptorPtr xvadaptors;
- pointer options;
-} confScreenRec, *confScreenPtr;
-
-typedef enum {
- PosObsolete = -1,
- PosAbsolute = 0,
- PosRightOf,
- PosLeftOf,
- PosAbove,
- PosBelow,
- PosRelative
-} PositionType;
-
-typedef struct _screenlayoutrec {
- confScreenPtr screen;
- char * topname;
- confScreenPtr top;
- char * bottomname;
- confScreenPtr bottom;
- char * leftname;
- confScreenPtr left;
- char * rightname;
- confScreenPtr right;
- PositionType where;
- int x;
- int y;
- char * refname;
- confScreenPtr refscreen;
-} screenLayoutRec, *screenLayoutPtr;
-
-typedef struct _serverlayoutrec {
- char * id;
- screenLayoutPtr screens;
- GDevPtr inactives;
- IDevPtr* inputs; /* NULL terminated */
- pointer options;
-} serverLayoutRec, *serverLayoutPtr;
-
-typedef struct _confdribufferrec {
- int count;
- int size;
- enum {
- XF86DRI_WC_HINT = 0x0001 /* Placeholder: not implemented */
- } flags;
-} confDRIBufferRec, *confDRIBufferPtr;
-
-typedef struct _confdrirec {
- int group;
- int mode;
- int bufs_count;
- confDRIBufferRec *bufs;
-} confDRIRec, *confDRIPtr;
-
-/* These values should be adjusted when new fields are added to ScrnInfoRec */
-#define NUM_RESERVED_INTS 16
-#define NUM_RESERVED_POINTERS 14
-#define NUM_RESERVED_FUNCS 11
-
-typedef pointer (*funcPointer)(void);
-
-/* flags for depth 24 pixmap options */
-typedef enum {
- Pix24DontCare = 0,
- Pix24Use24,
- Pix24Use32
-} Pix24Flags;
-
-/* Power management events: so far we only support APM */
-
-typedef enum {
- XF86_APM_UNKNOWN = -1,
- XF86_APM_SYS_STANDBY,
- XF86_APM_SYS_SUSPEND,
- XF86_APM_CRITICAL_SUSPEND,
- XF86_APM_USER_STANDBY,
- XF86_APM_USER_SUSPEND,
- XF86_APM_STANDBY_RESUME,
- XF86_APM_NORMAL_RESUME,
- XF86_APM_CRITICAL_RESUME,
- XF86_APM_LOW_BATTERY,
- XF86_APM_POWER_STATUS_CHANGE,
- XF86_APM_UPDATE_TIME,
- XF86_APM_CAPABILITY_CHANGED,
- XF86_APM_STANDBY_FAILED,
- XF86_APM_SUSPEND_FAILED
-} pmEvent;
-
-typedef enum {
- PM_WAIT,
- PM_CONTINUE,
- PM_FAILED,
- PM_NONE
-} pmWait;
-
-typedef struct _PciChipsets {
- /**
- * Key used to match this device with its name in an array of
- * \c SymTabRec.
- */
- int numChipset;
-
- /**
- * This value is quirky. Depending on the driver, it can take on one of
- * three meanings. In drivers that have exactly one vendor ID (e.g.,
- * radeon, mga, i810) the low 16-bits are the device ID.
- *
- * In drivers that can have multiple vendor IDs (e.g., the glint driver
- * can have either 3dlabs' ID or TI's ID, the i740 driver can have either
- * Intel's ID or Real3D's ID, etc.) the low 16-bits are the device ID and
- * the high 16-bits are the vendor ID.
- *
- * In drivers that don't have a specific vendor (e.g., vga) contains the
- * device ID for either the generic VGA or generic 8514 devices. This
- * turns out to be the same as the subclass and programming interface
- * value (e.g., the full 24-bit class for the VGA device is 0x030000 (or
- * 0x000101) and for 8514 is 0x030001).
- */
- int PCIid;
-
-/* dummy place holders for drivers to build against old/new servers */
-#define RES_UNDEFINED NULL
-#define RES_EXCLUSIVE_VGA NULL
-#define RES_SHARED_VGA NULL
- void *dummy;
-} PciChipsets;
-
-
-/* Entity properties */
-typedef void (*EntityProc)(int entityIndex,pointer private);
-
-typedef struct _entityInfo {
- int index;
- BusRec location;
- int chipset;
- Bool active;
- GDevPtr device;
- DriverPtr driver;
-} EntityInfoRec, *EntityInfoPtr;
-
-/* server states */
-
-typedef enum {
- SETUP,
- OPERATING
-} xf86State;
-
-/* DGA */
-
-typedef struct {
- int num; /* A unique identifier for the mode (num > 0) */
- DisplayModePtr mode;
- int flags; /* DGA_CONCURRENT_ACCESS, etc... */
- int imageWidth; /* linear accessible portion (pixels) */
- int imageHeight;
- int pixmapWidth; /* Xlib accessible portion (pixels) */
- int pixmapHeight; /* both fields ignored if no concurrent access */
- int bytesPerScanline;
- int byteOrder; /* MSBFirst, LSBFirst */
- int depth;
- int bitsPerPixel;
- unsigned long red_mask;
- unsigned long green_mask;
- unsigned long blue_mask;
- short visualClass;
- int viewportWidth;
- int viewportHeight;
- int xViewportStep; /* viewport position granularity */
- int yViewportStep;
- int maxViewportX; /* max viewport origin */
- int maxViewportY;
- int viewportFlags; /* types of page flipping possible */
- int offset; /* offset into physical memory */
- unsigned char *address; /* server's mapped framebuffer */
- int reserved1;
- int reserved2;
-} DGAModeRec, *DGAModePtr;
-
-typedef struct {
- DGAModePtr mode;
- PixmapPtr pPix;
-} DGADeviceRec, *DGADevicePtr;
-
-/*
- * Flags for driver Probe() functions.
- */
-#define PROBE_DEFAULT 0x00
-#define PROBE_DETECT 0x01
-#define PROBE_TRYHARD 0x02
-
-/*
- * Driver entry point types
- */
-
-typedef Bool xf86ProbeProc (DriverPtr, int);
-typedef Bool xf86PreInitProc (ScrnInfoPtr, int);
-typedef Bool xf86ScreenInitProc (int, ScreenPtr, int, char**);
-typedef Bool xf86SwitchModeProc (int, DisplayModePtr, int);
-typedef void xf86AdjustFrameProc (int, int, int, int);
-typedef Bool xf86EnterVTProc (int, int);
-typedef void xf86LeaveVTProc (int, int);
-typedef void xf86FreeScreenProc (int, int);
-typedef ModeStatus xf86ValidModeProc (int, DisplayModePtr, Bool, int);
-typedef void xf86EnableDisableFBAccessProc(int, Bool);
-typedef int xf86SetDGAModeProc (int, int, DGADevicePtr);
-typedef int xf86ChangeGammaProc (int, Gamma);
-typedef void xf86PointerMovedProc (int, int, int);
-typedef Bool xf86PMEventProc (int, pmEvent, Bool);
-typedef void xf86DPMSSetProc (ScrnInfoPtr, int, int);
-typedef void xf86LoadPaletteProc (ScrnInfoPtr, int, int *, LOCO *, VisualPtr);
-typedef void xf86SetOverscanProc (ScrnInfoPtr, int);
-
-
-/*
- * ScrnInfoRec
- *
- * There is one of these for each screen, and it holds all the screen-specific
- * information.
- *
- * Note: the size and layout must be kept the same across versions. New
- * fields are to be added in place of the "reserved*" fields. No fields
- * are to be dependent on compile-time defines.
- */
-
-
-typedef struct _ScrnInfoRec {
- int driverVersion;
- char * driverName; /* canonical name used in */
- /* the config file */
- ScreenPtr pScreen; /* Pointer to the ScreenRec */
- int scrnIndex; /* Number of this screen */
- Bool configured; /* Is this screen valid */
- int origIndex; /* initial number assigned to
- * this screen before
- * finalising the number of
- * available screens */
-
- /* Display-wide screenInfo values needed by this screen */
- int imageByteOrder;
- int bitmapScanlineUnit;
- int bitmapScanlinePad;
- int bitmapBitOrder;
- int numFormats;
- PixmapFormatRec formats[MAXFORMATS];
- PixmapFormatRec fbFormat;
-
- int bitsPerPixel; /* fb bpp */
- Pix24Flags pixmap24; /* pixmap pref for depth 24 */
- int depth; /* depth of default visual */
- MessageType depthFrom; /* set from config? */
- MessageType bitsPerPixelFrom; /* set from config? */
- rgb weight; /* r/g/b weights */
- rgb mask; /* rgb masks */
- rgb offset; /* rgb offsets */
- int rgbBits; /* Number of bits in r/g/b */
- Gamma gamma; /* Gamma of the monitor */
- int defaultVisual; /* default visual class */
- int maxHValue; /* max horizontal timing */
- int maxVValue; /* max vertical timing value */
- int virtualX; /* Virtual width */
- int virtualY; /* Virtual height */
- int xInc; /* Horizontal timing increment */
- MessageType virtualFrom; /* set from config? */
- int displayWidth; /* memory pitch */
- int frameX0; /* viewport position */
- int frameY0;
- int frameX1;
- int frameY1;
- int zoomLocked; /* Disallow mode changes */
- DisplayModePtr modePool; /* list of compatible modes */
- DisplayModePtr modes; /* list of actual modes */
- DisplayModePtr currentMode; /* current mode
- * This was previously
- * overloaded with the modes
- * field, which is a pointer
- * into a circular list */
- confScreenPtr confScreen; /* Screen config info */
- MonPtr monitor; /* Monitor information */
- DispPtr display; /* Display information */
- int * entityList; /* List of device entities */
- int numEntities;
- int widthmm; /* physical display dimensions
- * in mm */
- int heightmm;
- int xDpi; /* width DPI */
- int yDpi; /* height DPI */
- char * name; /* Name to prefix messages */
- pointer driverPrivate; /* Driver private area */
- DevUnion * privates; /* Other privates can hook in
- * here */
- DriverPtr drv; /* xf86DriverList[] entry */
- pointer module; /* Pointer to module head */
- int colorKey;
- int overlayFlags;
-
- /* Some of these may be moved out of here into the driver private area */
-
- char * chipset; /* chipset name */
- char * ramdac; /* ramdac name */
- char * clockchip; /* clock name */
- Bool progClock; /* clock is programmable */
- int numClocks; /* number of clocks */
- int clock[MAXCLOCKS]; /* list of clock frequencies */
- int videoRam; /* amount of video ram (kb) */
- unsigned long biosBase; /* Base address of video BIOS */
- unsigned long memPhysBase; /* Physical address of FB */
- unsigned long fbOffset; /* Offset of FB in the above */
- IOADDRESS domainIOBase; /* Domain I/O base address */
- int memClk; /* memory clock */
- int textClockFreq; /* clock of text mode */
- Bool flipPixels; /* swap default black/white */
- pointer options;
-
- int chipID;
- int chipRev;
-
- /* Allow screens to be enabled/disabled individually */
- Bool vtSema;
- DevUnion pixmapPrivate; /* saved devPrivate from pixmap */
-
- /* hw cursor moves at SIGIO time */
- Bool silkenMouse;
-
- /* Storage for clockRanges and adjustFlags for use with the VidMode ext */
- ClockRangePtr clockRanges;
- int adjustFlags;
-
- /*
- * These can be used when the minor ABI version is incremented.
- * The NUM_* parameters must be reduced appropriately to keep the
- * structure size and alignment unchanged.
- */
- int reservedInt[NUM_RESERVED_INTS];
-
- int * entityInstanceList;
- struct pci_device *vgaDev;
-
- pointer reservedPtr[NUM_RESERVED_POINTERS];
-
- /*
- * Driver entry points.
- *
- */
-
- xf86ProbeProc *Probe;
- xf86PreInitProc *PreInit;
- xf86ScreenInitProc *ScreenInit;
- xf86SwitchModeProc *SwitchMode;
- xf86AdjustFrameProc *AdjustFrame;
- xf86EnterVTProc *EnterVT;
- xf86LeaveVTProc *LeaveVT;
- xf86FreeScreenProc *FreeScreen;
- xf86ValidModeProc *ValidMode;
- xf86EnableDisableFBAccessProc *EnableDisableFBAccess;
- xf86SetDGAModeProc *SetDGAMode;
- xf86ChangeGammaProc *ChangeGamma;
- xf86PointerMovedProc *PointerMoved;
- xf86PMEventProc *PMEvent;
- xf86DPMSSetProc *DPMSSet;
- xf86LoadPaletteProc *LoadPalette;
- xf86SetOverscanProc *SetOverscan;
- xorgDriverFuncProc *DriverFunc;
-
- /*
- * This can be used when the minor ABI version is incremented.
- * The NUM_* parameter must be reduced appropriately to keep the
- * structure size and alignment unchanged.
- */
- funcPointer reservedFuncs[NUM_RESERVED_FUNCS];
-
-} ScrnInfoRec;
-
-
-typedef struct {
- Bool (*OpenFramebuffer)(
- ScrnInfoPtr pScrn,
- char **name,
- unsigned char **mem,
- int *size,
- int *offset,
- int *extra
- );
- void (*CloseFramebuffer)(ScrnInfoPtr pScrn);
- Bool (*SetMode)(ScrnInfoPtr pScrn, DGAModePtr pMode);
- void (*SetViewport)(ScrnInfoPtr pScrn, int x, int y, int flags);
- int (*GetViewport)(ScrnInfoPtr pScrn);
- void (*Sync)(ScrnInfoPtr);
- void (*FillRect)(
- ScrnInfoPtr pScrn,
- int x, int y, int w, int h,
- unsigned long color
- );
- void (*BlitRect)(
- ScrnInfoPtr pScrn,
- int srcx, int srcy,
- int w, int h,
- int dstx, int dsty
- );
- void (*BlitTransRect)(
- ScrnInfoPtr pScrn,
- int srcx, int srcy,
- int w, int h,
- int dstx, int dsty,
- unsigned long color
- );
-} DGAFunctionRec, *DGAFunctionPtr;
-
-typedef struct _SymTabRec {
- int token; /* id of the token */
- const char * name; /* token name */
-} SymTabRec, *SymTabPtr;
-
-/* flags for xf86LookupMode */
-typedef enum {
- LOOKUP_DEFAULT = 0, /* Use default mode lookup method */
- LOOKUP_BEST_REFRESH, /* Pick modes with best refresh */
- LOOKUP_CLOSEST_CLOCK, /* Pick modes with the closest clock */
- LOOKUP_LIST_ORDER, /* Pick first useful mode in list */
- LOOKUP_CLKDIV2 = 0x0100, /* Allow half clocks */
- LOOKUP_OPTIONAL_TOLERANCES = 0x0200 /* Allow missing hsync/vrefresh */
-} LookupModeFlags;
-
-#define NoDepth24Support 0x00
-#define Support24bppFb 0x01 /* 24bpp framebuffer supported */
-#define Support32bppFb 0x02 /* 32bpp framebuffer supported */
-#define SupportConvert24to32 0x04 /* Can convert 24bpp pixmap to 32bpp */
-#define SupportConvert32to24 0x08 /* Can convert 32bpp pixmap to 24bpp */
-#define PreferConvert24to32 0x10 /* prefer 24bpp pixmap to 32bpp conv */
-#define PreferConvert32to24 0x20 /* prefer 32bpp pixmap to 24bpp conv */
-
-
-/* For DPMS */
-typedef void (*DPMSSetProcPtr)(ScrnInfoPtr, int, int);
-
-/* Input handler proc */
-typedef void (*InputHandlerProc)(int fd, pointer data);
-
-/* These are used by xf86GetClocks */
-#define CLK_REG_SAVE -1
-#define CLK_REG_RESTORE -2
-
-/*
- * misc constants
- */
-#define INTERLACE_REFRESH_WEIGHT 1.5
-#define SYNC_TOLERANCE 0.01 /* 1 percent */
-#define CLOCK_TOLERANCE 2000 /* Clock matching tolerance (2MHz) */
-
-
-#define OVERLAY_8_32_DUALFB 0x00000001
-#define OVERLAY_8_24_DUALFB 0x00000002
-#define OVERLAY_8_16_DUALFB 0x00000004
-#define OVERLAY_8_32_PLANAR 0x00000008
-
-/* Values of xf86Info.mouseFlags */
-#define MF_CLEAR_DTR 1
-#define MF_CLEAR_RTS 2
-
-/* Action Events */
-typedef enum {
- ACTION_TERMINATE = 0, /* Terminate Server */
- ACTION_NEXT_MODE = 10, /* Switch to next video mode */
- ACTION_PREV_MODE,
- ACTION_SWITCHSCREEN = 100, /* VT switch */
- ACTION_SWITCHSCREEN_NEXT,
- ACTION_SWITCHSCREEN_PREV,
-} ActionEvent;
-
-#endif /* _XF86STR_H */
+
+/*
+ * Copyright (c) 1997-2003 by The XFree86 Project, Inc.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+ * THE COPYRIGHT HOLDER(S) OR AUTHOR(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR
+ * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
+ * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ *
+ * Except as contained in this notice, the name of the copyright holder(s)
+ * and author(s) shall not be used in advertising or otherwise to promote
+ * the sale, use or other dealings in this Software without prior written
+ * authorization from the copyright holder(s) and author(s).
+ */
+
+/*
+ * This file contains definitions of the public XFree86 data structures/types.
+ * Any data structures that video drivers need to access should go here.
+ */
+
+#ifndef _XF86STR_H
+#define _XF86STR_H
+
+#include "misc.h"
+#include "input.h"
+#include "scrnintstr.h"
+#include "pixmapstr.h"
+#include "colormapst.h"
+#include "xf86Module.h"
+#include "xf86Opt.h"
+#include "xf86Pci.h"
+
+#include <pciaccess.h>
+
+/**
+ * Integer type that is of the size of the addressable memory (machine size).
+ * On most platforms \c uintptr_t will suffice. However, on some mixed
+ * 32-bit / 64-bit platforms, such as 32-bit binaries on 64-bit PowerPC, this
+ * must be 64-bits.
+ */
+#include <inttypes.h>
+#if defined(__powerpc__)
+typedef uint64_t memType;
+#else
+typedef uintptr_t memType;
+#endif
+
+
+/* Video mode flags */
+
+typedef enum {
+ V_PHSYNC = 0x0001,
+ V_NHSYNC = 0x0002,
+ V_PVSYNC = 0x0004,
+ V_NVSYNC = 0x0008,
+ V_INTERLACE = 0x0010,
+ V_DBLSCAN = 0x0020,
+ V_CSYNC = 0x0040,
+ V_PCSYNC = 0x0080,
+ V_NCSYNC = 0x0100,
+ V_HSKEW = 0x0200, /* hskew provided */
+ V_BCAST = 0x0400,
+ V_PIXMUX = 0x1000,
+ V_DBLCLK = 0x2000,
+ V_CLKDIV2 = 0x4000
+} ModeFlags;
+
+typedef enum {
+ INTERLACE_HALVE_V = 0x0001 /* Halve V values for interlacing */
+} CrtcAdjustFlags;
+
+/* Flags passed to ChipValidMode() */
+typedef enum {
+ MODECHECK_INITIAL = 0,
+ MODECHECK_FINAL = 1
+} ModeCheckFlags;
+
+/* These are possible return values for xf86CheckMode() and ValidMode() */
+typedef enum {
+ MODE_OK = 0, /* Mode OK */
+ MODE_HSYNC, /* hsync out of range */
+ MODE_VSYNC, /* vsync out of range */
+ MODE_H_ILLEGAL, /* mode has illegal horizontal timings */
+ MODE_V_ILLEGAL, /* mode has illegal horizontal timings */
+ MODE_BAD_WIDTH, /* requires an unsupported linepitch */
+ MODE_NOMODE, /* no mode with a maching name */
+ MODE_NO_INTERLACE, /* interlaced mode not supported */
+ MODE_NO_DBLESCAN, /* doublescan mode not supported */
+ MODE_NO_VSCAN, /* multiscan mode not supported */
+ MODE_MEM, /* insufficient video memory */
+ MODE_VIRTUAL_X, /* mode width too large for specified virtual size */
+ MODE_VIRTUAL_Y, /* mode height too large for specified virtual size */
+ MODE_MEM_VIRT, /* insufficient video memory given virtual size */
+ MODE_NOCLOCK, /* no fixed clock available */
+ MODE_CLOCK_HIGH, /* clock required is too high */
+ MODE_CLOCK_LOW, /* clock required is too low */
+ MODE_CLOCK_RANGE, /* clock/mode isn't in a ClockRange */
+ MODE_BAD_HVALUE, /* horizontal timing was out of range */
+ MODE_BAD_VVALUE, /* vertical timing was out of range */
+ MODE_BAD_VSCAN, /* VScan value out of range */
+ MODE_HSYNC_NARROW, /* horizontal sync too narrow */
+ MODE_HSYNC_WIDE, /* horizontal sync too wide */
+ MODE_HBLANK_NARROW, /* horizontal blanking too narrow */
+ MODE_HBLANK_WIDE, /* horizontal blanking too wide */
+ MODE_VSYNC_NARROW, /* vertical sync too narrow */
+ MODE_VSYNC_WIDE, /* vertical sync too wide */
+ MODE_VBLANK_NARROW, /* vertical blanking too narrow */
+ MODE_VBLANK_WIDE, /* vertical blanking too wide */
+ MODE_PANEL, /* exceeds panel dimensions */
+ MODE_INTERLACE_WIDTH, /* width too large for interlaced mode */
+ MODE_ONE_WIDTH, /* only one width is supported */
+ MODE_ONE_HEIGHT, /* only one height is supported */
+ MODE_ONE_SIZE, /* only one resolution is supported */
+ MODE_NO_REDUCED, /* monitor doesn't accept reduced blanking */
+ MODE_BANDWIDTH, /* mode requires too much memory bandwidth */
+ MODE_BAD = -2, /* unspecified reason */
+ MODE_ERROR = -1 /* error condition */
+} ModeStatus;
+
+/*
+ * The mode sets are, from best to worst: USERDEF, DRIVER, and DEFAULT/BUILTIN.
+ * Preferred will bubble a mode to the top within a set.
+ */
+# define M_T_BUILTIN 0x01 /* built-in mode */
+# define M_T_CLOCK_C (0x02 | M_T_BUILTIN) /* built-in mode - configure clock */
+# define M_T_CRTC_C (0x04 | M_T_BUILTIN) /* built-in mode - configure CRTC */
+# define M_T_CLOCK_CRTC_C (M_T_CLOCK_C | M_T_CRTC_C)
+ /* built-in mode - configure CRTC and clock */
+# define M_T_PREFERRED 0x08 /* preferred mode within a set */
+# define M_T_DEFAULT 0x10 /* (VESA) default modes */
+# define M_T_USERDEF 0x20 /* One of the modes from the config file */
+# define M_T_DRIVER 0x40 /* Supplied by the driver (EDID, etc) */
+# define M_T_USERPREF 0x80 /* mode preferred by the user config */
+
+/* Video mode */
+typedef struct _DisplayModeRec {
+ struct _DisplayModeRec * prev;
+ struct _DisplayModeRec * next;
+ char * name; /* identifier for the mode */
+ ModeStatus status;
+ int type;
+
+ /* These are the values that the user sees/provides */
+ int Clock; /* pixel clock freq (kHz) */
+ int HDisplay; /* horizontal timing */
+ int HSyncStart;
+ int HSyncEnd;
+ int HTotal;
+ int HSkew;
+ int VDisplay; /* vertical timing */
+ int VSyncStart;
+ int VSyncEnd;
+ int VTotal;
+ int VScan;
+ int Flags;
+
+ /* These are the values the hardware uses */
+ int ClockIndex;
+ int SynthClock; /* Actual clock freq to
+ * be programmed (kHz) */
+ int CrtcHDisplay;
+ int CrtcHBlankStart;
+ int CrtcHSyncStart;
+ int CrtcHSyncEnd;
+ int CrtcHBlankEnd;
+ int CrtcHTotal;
+ int CrtcHSkew;
+ int CrtcVDisplay;
+ int CrtcVBlankStart;
+ int CrtcVSyncStart;
+ int CrtcVSyncEnd;
+ int CrtcVBlankEnd;
+ int CrtcVTotal;
+ Bool CrtcHAdjusted;
+ Bool CrtcVAdjusted;
+ int PrivSize;
+ INT32 * Private;
+ int PrivFlags;
+
+ float HSync, VRefresh;
+} DisplayModeRec, *DisplayModePtr;
+
+/* The monitor description */
+
+#define MAX_HSYNC 8
+#define MAX_VREFRESH 8
+
+typedef struct { float hi, lo; } range;
+
+typedef struct { CARD32 red, green, blue; } rgb;
+
+typedef struct { float red, green, blue; } Gamma;
+
+/* The permitted gamma range is 1 / GAMMA_MAX <= g <= GAMMA_MAX */
+#define GAMMA_MAX 10.0
+#define GAMMA_MIN (1.0 / GAMMA_MAX)
+#define GAMMA_ZERO (GAMMA_MIN / 100.0)
+
+typedef struct {
+ char * id;
+ char * vendor;
+ char * model;
+ int nHsync;
+ range hsync[MAX_HSYNC];
+ int nVrefresh;
+ range vrefresh[MAX_VREFRESH];
+ DisplayModePtr Modes; /* Start of the monitor's mode list */
+ DisplayModePtr Last; /* End of the monitor's mode list */
+ Gamma gamma; /* Gamma of the monitor */
+ int widthmm;
+ int heightmm;
+ pointer options;
+ pointer DDC;
+ Bool reducedblanking; /* Allow CVT reduced blanking modes? */
+ int maxPixClock; /* in kHz, like mode->Clock */
+} MonRec, *MonPtr;
+
+/* the list of clock ranges */
+typedef struct x_ClockRange {
+ struct x_ClockRange *next;
+ int minClock; /* (kHz) */
+ int maxClock; /* (kHz) */
+ int clockIndex; /* -1 for programmable clocks */
+ Bool interlaceAllowed;
+ Bool doubleScanAllowed;
+ int ClockMulFactor;
+ int ClockDivFactor;
+ int PrivFlags;
+} ClockRange, *ClockRangePtr;
+
+/*
+ * The driverFunc. xorgDriverFuncOp specifies the action driver should
+ * perform. If requested option is not supported function should return
+ * FALSE. pointer can be used to pass arguments to the function or
+ * to return data to the caller.
+ */
+typedef struct _ScrnInfoRec *ScrnInfoPtr;
+
+/* do not change order */
+typedef enum {
+ RR_GET_INFO,
+ RR_SET_CONFIG,
+ RR_GET_MODE_MM,
+ GET_REQUIRED_HW_INTERFACES = 10
+} xorgDriverFuncOp;
+
+typedef Bool xorgDriverFuncProc (ScrnInfoPtr, xorgDriverFuncOp,
+ pointer);
+
+/* RR_GET_INFO, RR_SET_CONFIG */
+typedef struct {
+ int rotation;
+ int rate;
+ int width;
+ int height;
+} xorgRRConfig;
+
+typedef union {
+ short RRRotations;
+ xorgRRConfig RRConfig;
+} xorgRRRotation, *xorgRRRotationPtr;
+
+/* RR_GET_MODE_MM */
+typedef struct {
+ DisplayModePtr mode;
+ int virtX;
+ int virtY;
+ int mmWidth;
+ int mmHeight;
+} xorgRRModeMM, *xorgRRModeMMPtr;
+
+/* GET_REQUIRED_HW_INTERFACES */
+#define HW_IO 1
+#define HW_MMIO 2
+#define HW_SKIP_CONSOLE 4
+#define NEED_IO_ENABLED(x) (x & HW_IO)
+
+typedef CARD32 xorgHWFlags;
+
+/*
+ * The driver list struct. This contains the information required for each
+ * driver before a ScrnInfoRec has been allocated.
+ */
+struct _DriverRec;
+
+typedef struct {
+ int driverVersion;
+ char * driverName;
+ void (*Identify)(int flags);
+ Bool (*Probe)(struct _DriverRec *drv, int flags);
+ const OptionInfoRec * (*AvailableOptions)(int chipid, int bustype);
+ pointer module;
+ int refCount;
+} DriverRec1;
+
+struct _SymTabRec;
+struct _PciChipsets;
+
+typedef struct _DriverRec {
+ int driverVersion;
+ char * driverName;
+ void (*Identify)(int flags);
+ Bool (*Probe)(struct _DriverRec *drv, int flags);
+ const OptionInfoRec * (*AvailableOptions)(int chipid, int bustype);
+ pointer module;
+ int refCount;
+ xorgDriverFuncProc *driverFunc;
+
+ const struct pci_id_match * supported_devices;
+ Bool (*PciProbe)( struct _DriverRec * drv, int entity_num,
+ struct pci_device * dev, intptr_t match_data );
+} DriverRec, *DriverPtr;
+
+/*
+ * AddDriver flags
+ */
+#define HaveDriverFuncs 1
+
+/*
+ * These are the private bus types. New types can be added here. Types
+ * required for the public interface should be added to xf86str.h, with
+ * function prototypes added to xf86.h.
+ */
+
+/* Tolerate prior #include <linux/input.h> */
+#if defined(linux) && defined(_INPUT_H)
+#undef BUS_NONE
+#undef BUS_PCI
+#undef BUS_SBUS
+#undef BUS_last
+#endif
+
+typedef enum {
+ BUS_NONE,
+ BUS_PCI,
+ BUS_SBUS,
+ BUS_last /* Keep last */
+} BusType;
+
+struct pci_device;
+
+typedef struct {
+ int fbNum;
+} SbusBusId;
+
+typedef struct _bus {
+ BusType type;
+ union {
+ struct pci_device *pci;
+ SbusBusId sbus;
+ } id;
+} BusRec, *BusPtr;
+
+#define MAXCLOCKS 128
+typedef enum {
+ DAC_BPP8 = 0,
+ DAC_BPP16,
+ DAC_BPP24,
+ DAC_BPP32,
+ MAXDACSPEEDS
+} DacSpeedIndex;
+
+typedef struct {
+ char * identifier;
+ char * vendor;
+ char * board;
+ char * chipset;
+ char * ramdac;
+ char * driver;
+ struct _confscreenrec * myScreenSection;
+ Bool claimed;
+ int dacSpeeds[MAXDACSPEEDS];
+ int numclocks;
+ int clock[MAXCLOCKS];
+ char * clockchip;
+ char * busID;
+ Bool active;
+ Bool inUse;
+ int videoRam;
+ int textClockFreq;
+ unsigned long BiosBase; /* Base address of video BIOS */
+ unsigned long MemBase; /* Frame buffer base address */
+ unsigned long IOBase;
+ int chipID;
+ int chipRev;
+ pointer options;
+ int irq;
+ int screen; /* For multi-CRTC cards */
+} GDevRec, *GDevPtr;
+
+typedef struct {
+ char * identifier;
+ char * driver;
+ pointer commonOptions;
+ pointer extraOptions;
+} IDevRec, *IDevPtr;
+
+typedef struct {
+ int frameX0;
+ int frameY0;
+ int virtualX;
+ int virtualY;
+ int depth;
+ int fbbpp;
+ rgb weight;
+ rgb blackColour;
+ rgb whiteColour;
+ int defaultVisual;
+ char ** modes;
+ pointer options;
+} DispRec, *DispPtr;
+
+typedef struct _confxvportrec {
+ char * identifier;
+ pointer options;
+} confXvPortRec, *confXvPortPtr;
+
+typedef struct _confxvadaptrec {
+ char * identifier;
+ int numports;
+ confXvPortPtr ports;
+ pointer options;
+} confXvAdaptorRec, *confXvAdaptorPtr;
+
+typedef struct _confscreenrec {
+ char * id;
+ int screennum;
+ int defaultdepth;
+ int defaultbpp;
+ int defaultfbbpp;
+ MonPtr monitor;
+ GDevPtr device;
+ int numdisplays;
+ DispPtr displays;
+ int numxvadaptors;
+ confXvAdaptorPtr xvadaptors;
+ pointer options;
+} confScreenRec, *confScreenPtr;
+
+typedef enum {
+ PosObsolete = -1,
+ PosAbsolute = 0,
+ PosRightOf,
+ PosLeftOf,
+ PosAbove,
+ PosBelow,
+ PosRelative
+} PositionType;
+
+typedef struct _screenlayoutrec {
+ confScreenPtr screen;
+ char * topname;
+ confScreenPtr top;
+ char * bottomname;
+ confScreenPtr bottom;
+ char * leftname;
+ confScreenPtr left;
+ char * rightname;
+ confScreenPtr right;
+ PositionType where;
+ int x;
+ int y;
+ char * refname;
+ confScreenPtr refscreen;
+} screenLayoutRec, *screenLayoutPtr;
+
+typedef struct _serverlayoutrec {
+ char * id;
+ screenLayoutPtr screens;
+ GDevPtr inactives;
+ IDevPtr* inputs; /* NULL terminated */
+ pointer options;
+} serverLayoutRec, *serverLayoutPtr;
+
+typedef struct _confdribufferrec {
+ int count;
+ int size;
+ enum {
+ XF86DRI_WC_HINT = 0x0001 /* Placeholder: not implemented */
+ } flags;
+} confDRIBufferRec, *confDRIBufferPtr;
+
+typedef struct _confdrirec {
+ int group;
+ int mode;
+ int bufs_count;
+ confDRIBufferRec *bufs;
+} confDRIRec, *confDRIPtr;
+
+/* These values should be adjusted when new fields are added to ScrnInfoRec */
+#define NUM_RESERVED_INTS 16
+#define NUM_RESERVED_POINTERS 14
+#define NUM_RESERVED_FUNCS 11
+
+typedef pointer (*funcPointer)(void);
+
+/* flags for depth 24 pixmap options */
+typedef enum {
+ Pix24DontCare = 0,
+ Pix24Use24,
+ Pix24Use32
+} Pix24Flags;
+
+/* Power management events: so far we only support APM */
+
+typedef enum {
+ XF86_APM_UNKNOWN = -1,
+ XF86_APM_SYS_STANDBY,
+ XF86_APM_SYS_SUSPEND,
+ XF86_APM_CRITICAL_SUSPEND,
+ XF86_APM_USER_STANDBY,
+ XF86_APM_USER_SUSPEND,
+ XF86_APM_STANDBY_RESUME,
+ XF86_APM_NORMAL_RESUME,
+ XF86_APM_CRITICAL_RESUME,
+ XF86_APM_LOW_BATTERY,
+ XF86_APM_POWER_STATUS_CHANGE,
+ XF86_APM_UPDATE_TIME,
+ XF86_APM_CAPABILITY_CHANGED,
+ XF86_APM_STANDBY_FAILED,
+ XF86_APM_SUSPEND_FAILED
+} pmEvent;
+
+typedef enum {
+ PM_WAIT,
+ PM_CONTINUE,
+ PM_FAILED,
+ PM_NONE
+} pmWait;
+
+typedef struct _PciChipsets {
+ /**
+ * Key used to match this device with its name in an array of
+ * \c SymTabRec.
+ */
+ int numChipset;
+
+ /**
+ * This value is quirky. Depending on the driver, it can take on one of
+ * three meanings. In drivers that have exactly one vendor ID (e.g.,
+ * radeon, mga, i810) the low 16-bits are the device ID.
+ *
+ * In drivers that can have multiple vendor IDs (e.g., the glint driver
+ * can have either 3dlabs' ID or TI's ID, the i740 driver can have either
+ * Intel's ID or Real3D's ID, etc.) the low 16-bits are the device ID and
+ * the high 16-bits are the vendor ID.
+ *
+ * In drivers that don't have a specific vendor (e.g., vga) contains the
+ * device ID for either the generic VGA or generic 8514 devices. This
+ * turns out to be the same as the subclass and programming interface
+ * value (e.g., the full 24-bit class for the VGA device is 0x030000 (or
+ * 0x000101) and for 8514 is 0x030001).
+ */
+ int PCIid;
+
+/* dummy place holders for drivers to build against old/new servers */
+#define RES_UNDEFINED NULL
+#define RES_EXCLUSIVE_VGA NULL
+#define RES_SHARED_VGA NULL
+ void *dummy;
+} PciChipsets;
+
+
+/* Entity properties */
+typedef void (*EntityProc)(int entityIndex,pointer private);
+
+typedef struct _entityInfo {
+ int index;
+ BusRec location;
+ int chipset;
+ Bool active;
+ GDevPtr device;
+ DriverPtr driver;
+} EntityInfoRec, *EntityInfoPtr;
+
+/* server states */
+
+typedef enum {
+ SETUP,
+ OPERATING
+} xf86State;
+
+/* DGA */
+
+typedef struct {
+ int num; /* A unique identifier for the mode (num > 0) */
+ DisplayModePtr mode;
+ int flags; /* DGA_CONCURRENT_ACCESS, etc... */
+ int imageWidth; /* linear accessible portion (pixels) */
+ int imageHeight;
+ int pixmapWidth; /* Xlib accessible portion (pixels) */
+ int pixmapHeight; /* both fields ignored if no concurrent access */
+ int bytesPerScanline;
+ int byteOrder; /* MSBFirst, LSBFirst */
+ int depth;
+ int bitsPerPixel;
+ unsigned long red_mask;
+ unsigned long green_mask;
+ unsigned long blue_mask;
+ short visualClass;
+ int viewportWidth;
+ int viewportHeight;
+ int xViewportStep; /* viewport position granularity */
+ int yViewportStep;
+ int maxViewportX; /* max viewport origin */
+ int maxViewportY;
+ int viewportFlags; /* types of page flipping possible */
+ int offset; /* offset into physical memory */
+ unsigned char *address; /* server's mapped framebuffer */
+ int reserved1;
+ int reserved2;
+} DGAModeRec, *DGAModePtr;
+
+typedef struct {
+ DGAModePtr mode;
+ PixmapPtr pPix;
+} DGADeviceRec, *DGADevicePtr;
+
+/*
+ * Flags for driver Probe() functions.
+ */
+#define PROBE_DEFAULT 0x00
+#define PROBE_DETECT 0x01
+#define PROBE_TRYHARD 0x02
+
+/*
+ * Driver entry point types
+ */
+
+typedef Bool xf86ProbeProc (DriverPtr, int);
+typedef Bool xf86PreInitProc (ScrnInfoPtr, int);
+typedef Bool xf86ScreenInitProc (int, ScreenPtr, int, char**);
+typedef Bool xf86SwitchModeProc (int, DisplayModePtr, int);
+typedef void xf86AdjustFrameProc (int, int, int, int);
+typedef Bool xf86EnterVTProc (int, int);
+typedef void xf86LeaveVTProc (int, int);
+typedef void xf86FreeScreenProc (int, int);
+typedef ModeStatus xf86ValidModeProc (int, DisplayModePtr, Bool, int);
+typedef void xf86EnableDisableFBAccessProc(int, Bool);
+typedef int xf86SetDGAModeProc (int, int, DGADevicePtr);
+typedef int xf86ChangeGammaProc (int, Gamma);
+typedef void xf86PointerMovedProc (int, int, int);
+typedef Bool xf86PMEventProc (int, pmEvent, Bool);
+typedef void xf86DPMSSetProc (ScrnInfoPtr, int, int);
+typedef void xf86LoadPaletteProc (ScrnInfoPtr, int, int *, LOCO *, VisualPtr);
+typedef void xf86SetOverscanProc (ScrnInfoPtr, int);
+
+
+/*
+ * ScrnInfoRec
+ *
+ * There is one of these for each screen, and it holds all the screen-specific
+ * information.
+ *
+ * Note: the size and layout must be kept the same across versions. New
+ * fields are to be added in place of the "reserved*" fields. No fields
+ * are to be dependent on compile-time defines.
+ */
+
+
+typedef struct _ScrnInfoRec {
+ int driverVersion;
+ char * driverName; /* canonical name used in */
+ /* the config file */
+ ScreenPtr pScreen; /* Pointer to the ScreenRec */
+ int scrnIndex; /* Number of this screen */
+ Bool configured; /* Is this screen valid */
+ int origIndex; /* initial number assigned to
+ * this screen before
+ * finalising the number of
+ * available screens */
+
+ /* Display-wide screenInfo values needed by this screen */
+ int imageByteOrder;
+ int bitmapScanlineUnit;
+ int bitmapScanlinePad;
+ int bitmapBitOrder;
+ int numFormats;
+ PixmapFormatRec formats[MAXFORMATS];
+ PixmapFormatRec fbFormat;
+
+ int bitsPerPixel; /* fb bpp */
+ Pix24Flags pixmap24; /* pixmap pref for depth 24 */
+ int depth; /* depth of default visual */
+ MessageType depthFrom; /* set from config? */
+ MessageType bitsPerPixelFrom; /* set from config? */
+ rgb weight; /* r/g/b weights */
+ rgb mask; /* rgb masks */
+ rgb offset; /* rgb offsets */
+ int rgbBits; /* Number of bits in r/g/b */
+ Gamma gamma; /* Gamma of the monitor */
+ int defaultVisual; /* default visual class */
+ int maxHValue; /* max horizontal timing */
+ int maxVValue; /* max vertical timing value */
+ int virtualX; /* Virtual width */
+ int virtualY; /* Virtual height */
+ int xInc; /* Horizontal timing increment */
+ MessageType virtualFrom; /* set from config? */
+ int displayWidth; /* memory pitch */
+ int frameX0; /* viewport position */
+ int frameY0;
+ int frameX1;
+ int frameY1;
+ int zoomLocked; /* Disallow mode changes */
+ DisplayModePtr modePool; /* list of compatible modes */
+ DisplayModePtr modes; /* list of actual modes */
+ DisplayModePtr currentMode; /* current mode
+ * This was previously
+ * overloaded with the modes
+ * field, which is a pointer
+ * into a circular list */
+ confScreenPtr confScreen; /* Screen config info */
+ MonPtr monitor; /* Monitor information */
+ DispPtr display; /* Display information */
+ int * entityList; /* List of device entities */
+ int numEntities;
+ int widthmm; /* physical display dimensions
+ * in mm */
+ int heightmm;
+ int xDpi; /* width DPI */
+ int yDpi; /* height DPI */
+ char * name; /* Name to prefix messages */
+ pointer driverPrivate; /* Driver private area */
+ DevUnion * privates; /* Other privates can hook in
+ * here */
+ DriverPtr drv; /* xf86DriverList[] entry */
+ pointer module; /* Pointer to module head */
+ int colorKey;
+ int overlayFlags;
+
+ /* Some of these may be moved out of here into the driver private area */
+
+ char * chipset; /* chipset name */
+ char * ramdac; /* ramdac name */
+ char * clockchip; /* clock name */
+ Bool progClock; /* clock is programmable */
+ int numClocks; /* number of clocks */
+ int clock[MAXCLOCKS]; /* list of clock frequencies */
+ int videoRam; /* amount of video ram (kb) */
+ unsigned long biosBase; /* Base address of video BIOS */
+ unsigned long memPhysBase; /* Physical address of FB */
+ unsigned long fbOffset; /* Offset of FB in the above */
+ IOADDRESS domainIOBase; /* Domain I/O base address */
+ int memClk; /* memory clock */
+ int textClockFreq; /* clock of text mode */
+ Bool flipPixels; /* swap default black/white */
+ pointer options;
+
+ int chipID;
+ int chipRev;
+
+ /* Allow screens to be enabled/disabled individually */
+ Bool vtSema;
+ DevUnion pixmapPrivate; /* saved devPrivate from pixmap */
+
+ /* hw cursor moves at SIGIO time */
+ Bool silkenMouse;
+
+ /* Storage for clockRanges and adjustFlags for use with the VidMode ext */
+ ClockRangePtr clockRanges;
+ int adjustFlags;
+
+ /*
+ * These can be used when the minor ABI version is incremented.
+ * The NUM_* parameters must be reduced appropriately to keep the
+ * structure size and alignment unchanged.
+ */
+ int reservedInt[NUM_RESERVED_INTS];
+
+ int * entityInstanceList;
+ struct pci_device *vgaDev;
+
+ pointer reservedPtr[NUM_RESERVED_POINTERS];
+
+ /*
+ * Driver entry points.
+ *
+ */
+
+ xf86ProbeProc *Probe;
+ xf86PreInitProc *PreInit;
+ xf86ScreenInitProc *ScreenInit;
+ xf86SwitchModeProc *SwitchMode;
+ xf86AdjustFrameProc *AdjustFrame;
+ xf86EnterVTProc *EnterVT;
+ xf86LeaveVTProc *LeaveVT;
+ xf86FreeScreenProc *FreeScreen;
+ xf86ValidModeProc *ValidMode;
+ xf86EnableDisableFBAccessProc *EnableDisableFBAccess;
+ xf86SetDGAModeProc *SetDGAMode;
+ xf86ChangeGammaProc *ChangeGamma;
+ xf86PointerMovedProc *PointerMoved;
+ xf86PMEventProc *PMEvent;
+ xf86DPMSSetProc *DPMSSet;
+ xf86LoadPaletteProc *LoadPalette;
+ xf86SetOverscanProc *SetOverscan;
+ xorgDriverFuncProc *DriverFunc;
+
+ /*
+ * This can be used when the minor ABI version is incremented.
+ * The NUM_* parameter must be reduced appropriately to keep the
+ * structure size and alignment unchanged.
+ */
+ funcPointer reservedFuncs[NUM_RESERVED_FUNCS];
+
+} ScrnInfoRec;
+
+
+typedef struct {
+ Bool (*OpenFramebuffer)(
+ ScrnInfoPtr pScrn,
+ char **name,
+ unsigned char **mem,
+ int *size,
+ int *offset,
+ int *extra
+ );
+ void (*CloseFramebuffer)(ScrnInfoPtr pScrn);
+ Bool (*SetMode)(ScrnInfoPtr pScrn, DGAModePtr pMode);
+ void (*SetViewport)(ScrnInfoPtr pScrn, int x, int y, int flags);
+ int (*GetViewport)(ScrnInfoPtr pScrn);
+ void (*Sync)(ScrnInfoPtr);
+ void (*FillRect)(
+ ScrnInfoPtr pScrn,
+ int x, int y, int w, int h,
+ unsigned long color
+ );
+ void (*BlitRect)(
+ ScrnInfoPtr pScrn,
+ int srcx, int srcy,
+ int w, int h,
+ int dstx, int dsty
+ );
+ void (*BlitTransRect)(
+ ScrnInfoPtr pScrn,
+ int srcx, int srcy,
+ int w, int h,
+ int dstx, int dsty,
+ unsigned long color
+ );
+} DGAFunctionRec, *DGAFunctionPtr;
+
+typedef struct _SymTabRec {
+ int token; /* id of the token */
+ const char * name; /* token name */
+} SymTabRec, *SymTabPtr;
+
+/* flags for xf86LookupMode */
+typedef enum {
+ LOOKUP_DEFAULT = 0, /* Use default mode lookup method */
+ LOOKUP_BEST_REFRESH, /* Pick modes with best refresh */
+ LOOKUP_CLOSEST_CLOCK, /* Pick modes with the closest clock */
+ LOOKUP_LIST_ORDER, /* Pick first useful mode in list */
+ LOOKUP_CLKDIV2 = 0x0100, /* Allow half clocks */
+ LOOKUP_OPTIONAL_TOLERANCES = 0x0200 /* Allow missing hsync/vrefresh */
+} LookupModeFlags;
+
+#define NoDepth24Support 0x00
+#define Support24bppFb 0x01 /* 24bpp framebuffer supported */
+#define Support32bppFb 0x02 /* 32bpp framebuffer supported */
+#define SupportConvert24to32 0x04 /* Can convert 24bpp pixmap to 32bpp */
+#define SupportConvert32to24 0x08 /* Can convert 32bpp pixmap to 24bpp */
+#define PreferConvert24to32 0x10 /* prefer 24bpp pixmap to 32bpp conv */
+#define PreferConvert32to24 0x20 /* prefer 32bpp pixmap to 24bpp conv */
+
+
+/* For DPMS */
+typedef void (*DPMSSetProcPtr)(ScrnInfoPtr, int, int);
+
+/* Input handler proc */
+typedef void (*InputHandlerProc)(int fd, pointer data);
+
+/* These are used by xf86GetClocks */
+#define CLK_REG_SAVE -1
+#define CLK_REG_RESTORE -2
+
+/*
+ * misc constants
+ */
+#define INTERLACE_REFRESH_WEIGHT 1.5
+#define SYNC_TOLERANCE 0.01 /* 1 percent */
+#define CLOCK_TOLERANCE 2000 /* Clock matching tolerance (2MHz) */
+
+
+#define OVERLAY_8_32_DUALFB 0x00000001
+#define OVERLAY_8_24_DUALFB 0x00000002
+#define OVERLAY_8_16_DUALFB 0x00000004
+#define OVERLAY_8_32_PLANAR 0x00000008
+
+/* Values of xf86Info.mouseFlags */
+#define MF_CLEAR_DTR 1
+#define MF_CLEAR_RTS 2
+
+/* Action Events */
+typedef enum {
+ ACTION_TERMINATE = 0, /* Terminate Server */
+ ACTION_NEXT_MODE = 10, /* Switch to next video mode */
+ ACTION_PREV_MODE,
+ ACTION_SWITCHSCREEN = 100, /* VT switch */
+ ACTION_SWITCHSCREEN_NEXT,
+ ACTION_SWITCHSCREEN_PREV,
+} ActionEvent;
+
+#endif /* _XF86STR_H */
diff --git a/xorg-server/hw/xfree86/doc/Makefile.am b/xorg-server/hw/xfree86/doc/Makefile.am
index 5809fa05f..a8cbc3c6b 100644
--- a/xorg-server/hw/xfree86/doc/Makefile.am
+++ b/xorg-server/hw/xfree86/doc/Makefile.am
@@ -1,9 +1,8 @@
-if BUILDDOCS
-SUBDIRS = devel man sgml
-else
-SUBDIRS = man
-endif
-
-EXTRA_DIST = \
- README.DRI \
- README.rapidaccess
+if BUILDDOCS
+SUBDIRS = devel man sgml
+else
+SUBDIRS = man
+endif
+
+EXTRA_DIST = \
+ README.modes
diff --git a/xorg-server/hw/xfree86/doc/README.DRI b/xorg-server/hw/xfree86/doc/README.DRI
deleted file mode 100644
index 7fc52eb32..000000000
--- a/xorg-server/hw/xfree86/doc/README.DRI
+++ /dev/null
@@ -1,1256 +0,0 @@
- DRI User Guide
-
- VA Linux Systems, Inc. Professional Services - Graphics.
-
- 15 June 2001
-
-1. Preamble
-
-1.1 Copyright
-
-Copyright 2000-2001 by VA Linux Systems, Inc. All Rights Reserved.
-
-Permission is granted to make and distribute verbatim copies of this document
-provided the copyright notice and this permission notice are preserved on all
-copies.
-
-1.2 Trademarks
-
-OpenGL is a registered trademark and SGI is a trademark of Silicon Graphics,
-Inc. Unix is a registered trademark of The Open Group. The `X' device and X
-Window System are trademarks of The Open Group. XFree86 is a trademark of
-The XFree86 Project. Linux is a registered trademark of Linus Torvalds.
-Intel is a registered trademark of Intel Corporation. 3Dlabs, GLINT, and
-Oxygen are either registered trademarks or trademarks of 3Dlabs Inc. Ltd.
-3dfx, Voodoo3, Voodoo4, and Voodoo5 are registered trademarks of 3dfx Inter-
-active, Incorporated. Matrox is a registered trademark of Matrox Electronic
-Systems Ltd. ATI Rage and Radeon are registered trademarks of ATI Technolo-
-gies, Inc. All other trademarks mentioned are the property of their respec-
-tive owners.
-
-2. Introduction
-
-With XFree86 4.x and the Direct Rendering Interface (DRI), hardware acceler-
-ated 3D graphics can be considered a standard feature on Linux workstations.
-Support for other operating systems, such as FreeBSD, is underway.
-
-This document describes how to use the DRI system and troubleshoot problems
-which may occur. Readers should have a basic understanding of Linux, X and
-OpenGL. See the resources section at the end for more documentation and
-software downloads.
-
-This document does not cover compilation or installation of XFree86 4.x. It
-is assumed that you've already installed a Linux distribution which includes
-XFree86 4.x or that you're an experienced Linux developer who has compiled
-the DRI for himself. DRI download, compilation and installation instructions
-can be found at http://dri.sourceforge.net/DRIcompile.html
-
-Edits, corrections and updates to this document may be mailed to <brian@tung-
-stengrahpics.com>.
-
-3. Supported Architectures & Hardware
-
-3.1 CPU Architectures
-
-The architectures currently supported by the DRI have grown from the initial
-Intel i386 systems to now include the Alpha Processor and the Sun SPARC
-machines.
-
-Intel's SSE (a.k.a. Katmai) instructions are used in optimized vertex trans-
-formation functions in Mesa-based drivers. This requires a recent Linux ker-
-nel both at compile and runtime. See the DRI Compile Guide for compile-time
-requirements. At runtime a check is made to determine if the CPU can execute
-SSE instructions. They're disabled otherwise.
-
-AMD's 3DNow! instructions are also used in optimized vertex transformation
-functions in the Mesa-based DRI drivers. 3DNow! is supported in most ver-
-sions of Linux. Like the SSE optimizations, a runtime check is made to
-determine if the CPU can execute 3DNow! instructions.
-
-Alpha-based systems can use Compaq's optimized math library for improved 3D
-performance. See the DRI Compilation Guide for details.
-
-3.2 Graphics Hardware
-
-XFree86 4.2 (or later versions) includes 3D acceleration for the following
-graphics hardware:
-
- o 3dfx, supported on Intel x86, AMD and Alpha:
-
- o Voodoo5 5500
-
- o Voodoo4 4500
-
- o Voodoo3 3500 TV
-
- o Voodoo3 3000 AGP
-
- o Voodoo3 3000 PCI
-
- o Voodoo3 2000 AGP
-
- o Voodoo3 2000 PCI
-
- o Voodoo Banshee
-
- o Velocity 100/200
-
- There are many configurations of 3dfx cards on the market. Not all have
- been tested.
-
- o Matrox, supported on Intel x86 and AMD:
-
- o Matrox G200
-
- o Matrox G400
-
- o Intel i810/i815/i830 (motherboard chipsets)
-
- o i810
-
- o i810-dc100
-
- o i810e
-
- o i815
-
- o i830
-
- o ATI Rage 128, supported on Intel x86, AMD and Alpha:
-
- o Rage Fury
-
- o Rage Magnum
-
- o XPERT 2000
-
- o XPERT 128
-
- o XPERT 99
-
- o All-in-Wonder 128
-
- o Rage 128 PCI (Alpha-based systems)
-
- Note that both PCI and AGP versions of Rage 128 based cards are sup-
- ported at this time.
-
- o ATI Radeon, supported on Intel x86, AMD and Alpha:
-
- o Radeon SDR AGP
-
- o Radeon DDR AGP
-
- o Radeon 32MB SDR PCI (Alpha-based systems)
-
- o Radeon 7000, M6 (RV100)
-
- o Radeon 7200 (R100)
-
- o Radeon 7500, M7 (RV200)
-
- o Radeon 8500, 9100 (R200)
-
- o Radeon 9000, M9 (RV250)
-
- o 3Dlabs, supported on Intel x86 and AMD:
-
- o Oxygen GMX 2000 (MX/Gamma based). Note: this driver is no longer
- being actively developed.
-
-Support for other hardware is underway. Most of the DRI development work is
-funded by contracts with IHVs. These contracts often prevent us from
-announcing drivers before they're released. Queries about upcoming drivers
-may not be answerable.
-
-4. Prerequisite Software
-
- o The DRI is available in XFree86 4.0 and later.
-
- o Some hardware drivers require specific versions of the Linux kernel for
- AGP support, etc. See section 10 for specifics.
-
- o You DO NOT need to install Mesa separately. The parts of Mesa needed
- for hardware acceleration are already in the XFree86/DRI project.
-
-5. Kernel Modules
-
-3D hardware acceleration requires a DRI kernel module that's specific to your
-graphics hardware.
-
-The DRI kernel module version must exactly match your running kernel version.
-Since there are so many versions of the kernel, it's difficult to provide
-precompiled kernel modules.
-
-While the Linux source tree includes the DRI kernel module sources, the lat-
-est DRI kernel sources will be found in the DRI source tree.
-
-See the DRI Compilation Guide for information on compiling the DRI kernel
-modules.
-
-XFree86 4.0.1 added automatic kernel module loading to the X server. On
-Linux, the X server uses modprobe to load kernel modules. In Linux 2.4.x the
-DRM kernel modules should be kept in /lib/modules/2.4.x/ker-
-nel/drivers/char/drm/ for automatic loading to work.
-
-Optionally, DRM kernel modules can be loaded manually with insmod prior to
-starting the X server.
-
-You can verify that the kernel module was installed with lsmod, checking the
-X server startup log, and checking that /proc/dri/0 exists.
-
-6. XF86Config file
-
-The XFree86 configuration file is usually found in /etc/X11/XF86Config. This
-section describes the parts which must be specially set for the DRI.
-
-First, the XF86Config file must load the GLX and DRI modules:
-
- Section "Module"
- ...
- # This loads the GLX module
- Load "glx"
- # This loads the DRI module
- Load "dri"
- EndSection
-
-Next, the DRI section can be used to restrict access to direct rendering. A
-client can only use direct rendering if it has permission to open the
-/dev/dri/card? file(s). The permissions on these DRI device files is con-
-trolled by the "DRI" section in the XF86Config file.
-
-If you want all of the users on your system to be able to use direct-render-
-ing, then use a simple DRI section like this:
-
- Section "DRI"
- Mode 0666
- EndSection
-
-This section will allow any user with a current connection to the X server to
-use direct rendering.
-
-If you want to restrict the use of direct-rendering to a certain group of
-users, then create a group for those users by editing the /etc/group file on
-your system. For example, you may want to create a group called xf86dri and
-place two users (e.g., fred and jane) in that group. To do that, you might
-add the following line to /etc/group:
-
- xf86dri:x:8000:fred,jane
-
-You have to be careful that the group id (8000 in this example) is unique.
-
-Then you would use the following DRI section:
-
- Section "DRI"
- Group "xf86dri"
- Mode 0660
- EndSection
-
-This would limit access to direct-rendering to those users in the xf86dri
-group (fred and jane in this example). When other users tried to use direct
-rendering, they would fall back to unaccelerated indirect rendering.
-
-[Note that there is a known bug in XFree86 4.0 that prevents some changes to
-the DRI section from taking effect. Until this bug is fixed, if you change
-the DRI section, please also remove the /dev/dri directory with the rm -rf
-/dev/dri command.]
-
-Finally, the XF86Config file needs Device and Screen sections specific to
-your hardware. Look in section 10: Hardware-Specific Information and Trou-
-bleshooting for details.
-
-7. Memory usage
-
-Using the 3D features of a graphics card requires more memory than when it's
-just used as a 2D device. Double buffering, depth buffering, stencil
-buffers, textures, etc. all require extra graphics memory. These features
-may require four times the memory used for a simple 2D display.
-
-If your graphics card doesn't have a lot of memory (less than 16MB, for exam-
-ple), you may have to reduce your screen size and/or color depth in order to
-use 3D features. Reducing the screen resolution will also leave more space
-for texture images, possibly improving 3D performance. If, for example, you
-play Quake3 at 1024x768 but start your display at 1600x1200 you might con-
-sider restarting X at 1024x768 in order to maximize your texture memory
-space.
-
-The documentation included with your card should have information about maxi-
-mum screen size when using 3D.
-
-8. Using 3D Acceleration
-
-This section describes how to link your application with libGL.so and verify
-that you are in fact using 3D acceleration.
-
-8.1 libGL.so
-
-Your OpenGL program must link with the libGL.so.1.2 library provided by
-XFree86. The libGL.so.1.2 library contains a GLX protocol encoder for indi-
-rect/remote rendering and DRI code for accessing hardware drivers. In par-
-ticular, be sure you're not using libGL.so from another source such as Mesa
-or the Utah GLX project.
-
-Unless it was built in a special way, the libGL.so library does not contain
-any 3D hardware driver code. Instead, libGL.so dynamically loads the appro-
-priate 3D driver during initialization.
-
-Most simple OpenGL programs also use the GLUT and GLU libraries. A source
-for these libraries is listed in the Resources section below.
-
-8.2 Compiling and linking an OpenGL program
-
-A simple GLUT/OpenGL program may be compiled and linked as follows:
-
- gcc program.c -I/usr/local/include -L/usr/local/lib -L/usr/X11R6/lib -lglut -lGLU -lGL -o program
-
-The -I option is used to specify where the GL/glut.h (and possibly the
-GL/gl.h and GL/glu.h) header file may be found.
-
-The -L options specify where the libglut.so and the X libraries are located.
-libGL.so and libGLU.so should be in /usr/lib, as specified by the
-Linux/OpenGL ABI standard.
-
-The -lglut -lGLU -lGL arguments specify that the application should link with
-the GLUT, GLU and GL libraries, in that order.
-
-8.3 Running your OpenGL program
-
-Simply typing ./program in your shell should execute the program.
-
-If you get an error message such as
-
- gears: error in loading shared libraries: libGL.so.1: cannot
- open shared object file: No such file or directory
-
-if means that the libGL.so.1 file is not the right location. Proceed to the
-trouble shooting section.
-
-8.4 libOSMesa.so
-
-OSMesa (Off-Screen Mesa) is an interface and driver for rendering 3D images
-into a user-allocated block of memory rather than an on-screen window. It
-was originally developed for Mesa before Mesa became part of the XFree86/DRI
-project. It can now be used with the XFree86/DRI libGL.so as well.
-
-libOSMesa.so implements the OSMesa interface and it must be linked with your
-application if you want to use the OSMesa functions. You must also link with
-libGL.so. For example:
-
- gcc osdemo.c -lOSMesa -lGLU -lGL -o osdemo
-
-In stand-alone Mesa this interface was compiled into the monolithic libGL.so
-(formerly libMesaGL.so) library. In XFree86 4.0.1 and later this interface
-is implemented in a separate library.
-
-8.5 glxinfo
-
-glxinfo is a useful program for checking which version of libGL you're using
-as well as which DRI-based driver. Simply type glxinfo and examine the
-OpenGL vendor, renderer, and version lines. Among the output you should see
-something like this:
-
- OpenGL vendor string: VA Linux Systems, Inc.
- OpenGL renderer string: Mesa DRI Voodoo3 20000224
- OpenGL version string: 1.2 Mesa 3.4
-
-or this:
-
- OpenGL vendor string: VA Linux Systems, Inc.
- OpenGL renderer string: Mesa GLX Indirect
- OpenGL version string: 1.2 Mesa 3.4
-
-The first example indicates that the 3dfx driver is using Voodoo3 hardware.
-The second example indicates that no hardware driver was found and indirect,
-unaccelerated rendering is being used.
-
-If you see that indirect rendering is being used when direct rendering was
-expected, proceed to the troubleshooting section.
-
-glxinfo also lists all of the GLX-enhanced visuals available so you can
-determine which visuals are double-bufferd, have depth (Z) buffers, stencil
-buffers, accumulation buffers, etc.
-
-8.6 Environment Variables
-
-The libGL.so library recognizes three environment variables. Normally, none
-of them need to be defined. If you're using the csh or tcsh shells, type
-setenv VARNAME value to set the variable. Otherwise, if you're using sh or
-bash, type export VARNAME=value.
-
- 1. LIBGL_DEBUG, if defined will cause libGL.so to print error and diagnos-
- tic messages. This can help to solve problems. Setting LIBGL_DEBUG to
- verbose may provide additional information.
-
- 2. LIBGL_ALWAYS_INDIRECT, if defined this will force libGL.so to always
- use indirect rendering instead of hardware acceleration. This can be
- useful to isolate rendering errors.
-
- 3. LIBGL_DRIVERS_PATH can be used to override the default directories
- which are searched for 3D drivers. The value is one or more paths sep-
- arated by colons. In a typical XFree86 installation, the 3D drivers
- should be in /usr/X11R6/lib/modules/dri/ and LIBGL_DRIVERS_PATH need
- not be defined. Note that this feature is disabled for set-uid pro-
- grams. This variable replaces the LIBGL_DRIVERS_DIR env var used in
- XFree86 4.0.
-
- 4. MESA_DEBUG, if defined, will cause Mesa-based 3D drivers to print user
- error messages to stderr. These are errors that you'd otherwise detect
- by calling glGetError.
-
-Mesa-based drivers (this includes most of the drivers listed above) also
-observe many of the existing Mesa environment variables. These include the
-MESA_DEBUG and MESA_INFO variables.
-
-9. General Trouble Shooting
-
-This section contains information to help you diagnose general problems. See
-below for additional information for specific hardware.
-
-9.1 Bus Mastering
-
-DMA-based DRI drivers (that's most DRI drivers) cannot function unless bus
-mastering is enabled for your graphics card. By default, some systems don't
-having bus mastering on. You should enable it in your BIOS.
-
-Alternately, you can check the status of bus mastering and change the setting
-from within Linux. There may be similar procedures for other operating sys-
-tems.
-
-Run lspci (as root) and find the information describing your graphics
-adapter. For example:
-
- 00:00.0 Host bridge: Intel Corporation 440BX/ZX - 82443BX/ZX Host bridge (rev 03)
- 00:01.0 PCI bridge: Intel Corporation 440BX/ZX - 82443BX/ZX AGP bridge (rev 03)
- 00:07.0 ISA bridge: Intel Corporation 82371AB PIIX4 ISA (rev 02)
- 00:07.1 IDE interface: Intel Corporation 82371AB PIIX4 IDE (rev 01)
- 00:07.2 USB Controller: Intel Corporation 82371AB PIIX4 USB (rev 01)
- 00:07.3 Bridge: Intel Corporation 82371AB PIIX4 ACPI (rev 02)
- 00:11.0 Ethernet controller: Intel Corporation 82557 [Ethernet Pro 100] (rev 08)
- 00:12.0 SCSI storage controller: Symbios Logic Inc. (formerly NCR) 53c895 (rev 02)
- 00:14.0 Multimedia audio controller: Ensoniq ES1371 [AudioPCI-97] (rev 08)
- 01:00.0 VGA compatible controller: 3Dfx Interactive, Inc.: Unknown device 0009 (rev 01)
-
-The bus, device, and function number comprise the device id, which is conven-
-tionally written in the form bus:dev.func, or in this case 01:00.0.
-
-Use the setpci command to examine bit two of register 4 for your graphics
-card. This will indicate whether or not bus mastering is enabled.
-
- setpci -s 01:00.0 4.w
-
-A hexadecimal value will be printed. Convert the least significant digit to
-binary. For example, if you see 3, that's 0011 in binary (bit two is 0). If
-you see 7, that's 0111 in binary (bit two is 1). In the first example, bus
-mastering is disabled. It's enabled in the second example.
-
-The following shell script will enabled bus mastering for your graphics card
-and host bridge. Run it as root.
-
- #!/bin/bash
- dev=01:00.0 # change as appropriate
- echo Enabling bus mastering on device $dev
- setpci -s $dev 4.w=$(printf %x $((0x$(setpci -s $dev 4.w)|4)))
- dev=00:00.0
- echo Enabling bus mastering on host bridge $dev
- setpci -s $dev 4.w=$(printf %x $((0x$(setpci -s $dev 4.w)|4)))
-
-You can check if this worked by running the first setpci command again.
-
-9.2 The X Server
-
- 1. Before you start the X server, verify the appropriate 3D kernel module
- is installed. Type lsmod and look for the appropriate kernel module.
- For 3dfx hardware you should see tdfx, for example.
-
- 2. Verify you're running XFree86 4.0 (or newer) and not an older version.
- If you run xdpyinfo and look for the following line near the top:
-
- vendor release number: 4000
-
- 3. Verify that your XF86Config file (usually found at /etc/X11/XF86Config)
- loads the glx and dri modules and has a DRI section.
-
- See the Software Resources section below for sample XF86Config files.
-
- 4. Examine the messages printed during X server startup and check that the
- DRM module loaded. Using the Voodoo3 as an example:
-
- (==) TDFX(0): Write-combining range (0xf0000000,0x2000000)
- (II) TDFX(0): Textures Memory 7.93 MB
- (0): [drm] created "tdfx" driver at busid "PCI:1:0:0"
- (0): [drm] added 4096 byte SAREA at 0xc65dd000
- (0): [drm] mapped SAREA 0xc65dd000 to 0x40013000
- (0): [drm] framebuffer handle = 0xf0000000
- (0): [drm] added 1 reserved context for kernel
- (II) TDFX(0): [drm] Registers = 0xfc000000
- (II) TDFX(0): visual configs initialized
- (II) TDFX(0): Using XFree86 Acceleration Architecture (XAA)
- Screen to screen bit blits
- Solid filled rectangles
- 8x8 mono pattern filled rectangles
- Indirect CPU to Screen color expansion
- Solid Lines
- Dashed Lines
- Offscreen Pixmaps
- Driver provided NonTEGlyphRenderer replacement
- Setting up tile and stipple cache:
- 10 128x128 slots
- (==) TDFX(0): Backing store disabled
- (==) TDFX(0): Silken mouse enabled
- (0): X context handle = 0x00000001
- (0): [drm] installed DRM signal handler
- (0): [DRI] installation complete
- (II) TDFX(0): direct rendering enabled
-
- 5. After the X server has started, verify that the required X server
- extensions are loaded. Run xdpyinfo and look for the following entries
- in the extensions list:
-
- GLX
- SGI-GLX
- XFree86-DRI
-
-9.3 Linking, running and verifying 3D acceleration
-
-After you've verified that the X server and DRI have started correctly it's
-time to verify that the GL library and hardware drivers are working cor-
-rectly.
-
- 1. Verify that you're using the correct libGL.so library with ldd. The
- /usr/lib and /usr/X11R6/lib directories are expected locations for
- libGL.so.
-
- Example:
-
- % ldd /usr/local/bin/glxinfo
- libglut.so.3 => /usr/local/lib/libglut.so.3 (0x40019000)
- libGLU.so.1 => /usr/local/lib/libGLU.so.1 (0x40051000)
- libGL.so.1 => /usr/lib/libGL.so.1 (0x40076000)
- libXmu.so.6 => /usr/X11R6/lib/libXmu.so.6 (0x402ee000)
- libXi.so.6 => /usr/X11R6/lib/libXi.so.6 (0x40301000)
- libm.so.6 => /lib/libm.so.6 (0x40309000)
- libc.so.6 => /lib/libc.so.6 (0x40325000)
- libX11.so.6 => /usr/X11R6/lib/libX11.so.6 (0x40419000)
- libXt.so.6 => /usr/X11R6/lib/libXt.so.6 (0x404bd000)
- libSM.so.6 => /usr/X11R6/lib/libSM.so.6 (0x40509000)
- libICE.so.6 => /usr/X11R6/lib/libICE.so.6 (0x40512000)
- libXext.so.6 => /usr/X11R6/lib/libXext.so.6 (0x40529000)
- libvga.so.1 => /usr/lib/libvga.so.1 (0x40537000)
- libpthread.so.0 => /lib/libpthread.so.0 (0x4057d000)
- /lib/ld-linux.so.2 => /lib/ld-linux.so.2 (0x40000000)
-
- 2. You may also double check that libGL.so is in fact DRI-capable. Run
- strings libGL.so.1.2 | grep DRI and look for symbols prefixed with
- "XF86DRI", such as "XF86DRIQueryExtension".
-
- 3. To be safe one should run ldconfig after installing libGL.so to be sure
- the runtime loader will find the proper library.
-
- 4. Verify that the appropriate 3D driver is in /usr/X11R6/lib/modules/dri/
- For example, the 3dfx driver will be named tdfx_dri.so.
-
- 5. Set the LIBGL_DEBUG environment variable. This will cause libGL.so to
- print an error message if it fails to load a DRI driver. Any error
- message printed should be self-explanatory.
-
- 6. Run glxinfo. Note the line labeled "OpenGL renderer string". It
- should have a value which starts with "Mesa DRI" followed by the name
- of your hardware.
-
- 7. Older Linux OpenGL applications may have been linked against Mesa's GL
- library and will not automatically use libGL.so. In some cases, making
- symbolic links from the Mesa GL library to libGL.so.1 will solve the
- problem:
-
- ln -s libGL.so.1 libMesaGL.so.3
-
- In other cases, the application will have to be relinked against the
- new XFree86 libGL.so.
-
- It is reported that part of the problem is that running ldconfig will
- silently rewrite symbolic links based on the SONAME field in libraries.
-
-If you're still having trouble, look in the next section for information spe-
-cific to your graphics card.
-
-10. Hardware-Specific Information and Troubleshooting
-
-This section presents hardware-specific information for normal use and trou-
-bleshooting.
-
-10.1 3dfx Banshee, Voodoo3, Voodoo4 and Voodoo5 Series
-
-10.1.1 Requirements
-
-The 3dfx DRI driver requires special versions of the 3dfx Glide library.
-Different versions of Glide are needed for Banshee/Voodoo3 than for
-Voodoo4/5. The Glide libraries can be downloaded from the DRI website.
-
-10.1.2 Configuration
-
-Your XF86Config file's device section must specify the tdfx device. For
-example:
-
- Section "Device"
- Identifier "Voodoo3"
- VendorName "3dfx"
- Driver "tdfx"
- EndSection
-
-Or,
-
- Section "Device"
- Identifier "Voodoo5"
- VendorName "3dfx"
- Driver "tdfx"
- EndSection
-
-The Screen section should then reference the Voodoo device:
-
- Section "Screen"
- Identifier "Screen 1"
- Device "Voodoo3"
- Monitor "High Res Monitor"
- DefaultDepth 16
- Subsection "Display"
- Depth 16
- Modes "1280x1024" "1024x768" "800x600" "640x480"
- ViewPort 0 0
- EndSubsection
- EndSection
-
-Or,
-
- Section "Screen"
- Identifier "Screen 1"
- Device "Voodoo5"
- Monitor "High Res Monitor"
- DefaultDepth 24
- Subsection "Display"
- Depth 16
- Modes "1280x1024" "1024x768" "800x600" "640x480"
- ViewPort 0 0
- EndSubsection
- Subsection "Display"
- Depth 24
- Modes "1280x1024" "1024x768" "800x600" "640x480"
- ViewPort 0 0
- EndSubsection
- EndSection
-
-The kernel module for 3dfx hardware is named tdfx.o and should be installed
-in /lib/modules/2.4.x/kernel/drivers/char/drm/. It will be automatically
-loaded by the Xserver if needed.
-
-The DRI 3D driver for 3dfx hardware should be in /usr/X11R6/lib/mod-
-ules/dri/tdfx_dri.so. This will be automatically loaded by libGL.so.
-
-The Voodoo5 supports 3D rendering in 16 and 32 bpp modes. When running in
-32bpp mode an 8-bit stencil buffer and 24-bit Z (depth) buffer are offered.
-When running in 16bpp mode only a 16-bit Z (depth) buffer is offered and
-stencil is implemented in software.
-
-A software-based accumulation buffer is available in both 16 and 32bpp modes.
-
-10.1.3 Troubleshooting
-
- o If you try to run an OpenGL application and see an error message similar
- to
-
- gd error (glide): gd error (glide): grSstSelect: non-existent SSTgd error (glide): grSstSelect: non-existent SSTS
-
- it means that you have the wrong version of the Glide library for your
- hardware.
-
- o 3D acceleration for Banshee and Voodoo3 is only supported in the 16
- bit/pixel screen mode. Use xdpyinfo to verify that all your visuals are
- depth 16. Edit your XF86Config file if needed.
-
- o The /dev/3dfx device is not used for DRI; it's only for Glide on older
- 3dfx hardware.
-
- o Different versions of Glide are needed for Voodoo3 and Voodoo5. See the
- DRI website's resources page to download the right version of Glide.
-
- o Voodoo4/5 may be run at 24bpp (instead of 32bpp, the default) but 3D
- acceleration is not supported in that mode. 32bpp mode is fully 3D
- accelerated.
-
-10.1.4 Performance and Features
-
- o Normally, buffer swapping in double-buffered applications is synchro-
- nized to your monitor's refresh rate. This may be overridden by setting
- the FX_GLIDE_SWAPINTERVAL environment variable. The value of this vari-
- able indicates the maximum number of swap buffer commands can be
- buffered. Zero allows maximum frame rate.
-
- o On Voodoo4/5, rendering with 16-bits/texel textures is faster than using
- 32-bit per texel textures. The internalFormat parameter to glTexImage2D
- can be used to control texel size. Quake3 and other games let you con-
- trol this as well.
-
- o The glTexEnv mode GL_BLEND is not directly supported by the Voodoo3
- hardware. It can be accomplished with a multipass algorithm but it's
- not implemented at this time. Applications which use that mode, such as
- the Performer Town demo, may become sluggish when falling back to soft-
- ware rendering to render in that mode.
-
- o The Voodoo3/Banshee driver reverts to software rendering under the fol-
- lowing conditions:
-
- o Setting GL_LIGHT_MODEL_COLOR_CONTROL to GL_SEPARATE_SPECULAR_COLOR.
-
- o Enabling line stippling or polygon stippling.
-
- o Enabling point smoothing or polygon smoothing.
-
- o Enabling line smoothing when line width is not 1.0. That is,
- antialiased lines are done in hardware only when the line width is
- 1.0.
-
- o Using 1-D or 3-D texture maps.
-
- o Using the GL_BLEND texture environment.
-
- o Using stencil operations.
-
- o Using the accumulation buffer.
-
- o Using glBlendEquation(GL_LOGIC_OP).
-
- o Using glDrawBuffer(GL_FRONT_AND_BACK).
-
- o Using glPolygonMode(face, GL_POINT) or glPolygonMode(face,
- GL_LINE).
-
- o Using point size attenuation (i.e. GL_DISTANCE_ATTENUATION_EXT).
-
- o Using glColorMask(r, g, b, a) when r!=g or g!=b.
-
- o The Voodoo5 driver reverts to software rendering under the same condi-
- tions Voodoo3 with three exceptions. First, stencil operations are
- implemented in hardware when the screen is configured for 32 bits/pixel.
- Second, the GL_BLEND texture env mode is fully supported in hardware.
- Third, glColorMask is fully supported in hardware when the screen is
- configured for 32 bits/pixel.
-
- o As of January, 2001 the second VSA-100 chip on the Voodoo5 is not yet
- operational. Therefore, the board isn't being used to its full capac-
- ity. The second VSA-100 chip will allow Scan-Line Interleave (SLI) mode
- for full-screen applications and games, potentially doubling the sys-
- tem's fill rate. When the second VSA-100 chip is activated glGet-
- String(GL_RENDERER) will report Voodoo5 instead of Voodoo4.
-
- o The lowest mipmap level is sometimes miscolored in trilinear- sampled
- polygons.
-
- o The GL_EXT_texture_env_combine extension is supported on the Voodoo4 and
- Voodoo5.
-
-10.1.5 Known Problems
-
- o The lowest mipmap level is sometimes miscolored in trilinear- sampled
- polygons (Voodoo3/Banshee).
-
- o Fog doesn't work with orthographic projections.
-
- o The accuracy of blending operations on Voodoo4/5 isn't always very good.
- If you run Glean, you'll find some test failures.
-
- o The Glide library cannot be used directly; it's only meant to be used
- via the tdfx DRI driver.
-
- o SSystem has problems because of poorly set near and far clipping planes.
- The office.unc Performer model also suffers from this problem.
-
-10.2 Intel i810
-
-10.2.1 Requirements
-
-A kernel with AGP GART support (such as Linux 2.4.x) is needed.
-
-10.2.2 Configuration
-
-Your XF86Config file's device section must specify the i810 device, and spec-
-ify a usable amount of video ram to reserve.
-
- Section "Device"
- Identifier "i810"
- VendorName "Intel"
- Driver "i810"
- Option "AGPMode" "1"
- VideoRam 10000
- EndSection
-
-The Screen section should then reference the i810 device:
-
- Section "Screen"
- Identifier "Screen 1"
- Device "i810"
- Monitor "High Res Monitor"
- DefaultDepth 16
- Subsection "Display"
- Depth 16
- Modes "1280x1024" "1024x768" "800x600" "640x480"
- ViewPort 0 0
- EndSubsection
- EndSection
-
-The kernel module for the i810 is named i810.o and should be installed in
-/lib/modules/2.4.x/kernel/drivers/char/drm/. It will be automatically loaded
-by the Xserver if needed.
-
-The DRI 3D driver for the i810 should be in /usr/X11R6/lib/mod-
-ules/dri/i810_dri.so. This will be automatically loaded by libGL.so.
-
-10.2.3 Troubleshooting
-
- o 3D acceleration for the i810 is only available in the 16 bit/pixel
- screen mode at this time. 32bpp acceleration is not supported by this
- hardware. Use xdpyinfo to verify that all your visuals are depth 16.
- Edit your XF86Config file if needed.
-
- o The i810 uses system ram for video and 3d graphics. The X server will
- ordinarily reserve 4mb of ram for graphics, which is too little for an
- effective 3d setup. To tell the driver to use a larger amount, specify
- a VideoRam option in the Device section of your XF86Config file. A num-
- ber between 10000 and 16384 seems adequate for most requirements. If
- too little memory is available for DMA buffers, back and depth buffers
- and textures, direct rendering will be disabled.
-
-10.2.4 Performance and Features
-
-Basically all of the i810 features which can be exposed through OpenGL 1.2
-are implemented. However, the following OpenGL features are implemented in
-software and will be slow:
-
- o Stencil buffer and accumulation buffer operations
-
- o Blend subtract, min/max and logic op blend modes
-
- o glColorMask when any mask is set to false
-
- o GL_SEPARATE_SPECULAR_COLOR lighting mode
-
- o glDrawBuffer(GL_FRONT_AND_BACK)
-
- o Using 1D or 3D textures
-
- o Using texture borders
-
-10.3 Matrox G200 and G400
-
-10.3.1 Requirements
-
-A kernel with AGP GART support (such as Linux 2.4.x) is needed.
-
-10.3.2 Configuration
-
-Your XF86Config file's device section must specify the mga device:
-
- Section "Device"
- Identifier "MGA"
- VendorName "Matrox"
- Driver "mga"
- Option "AGPMode" "1"
- VideoRam 32768
- EndSection
-
-The Screen section should then reference the MGA device:
-
- Section "Screen"
- Identifier "Screen 1"
- Device "MGA"
- Monitor "High Res Monitor"
- DefaultDepth 16
- Subsection "Display"
- Depth 16
- Modes "1280x1024" "1024x768" "800x600" "640x480"
- ViewPort 0 0
- EndSubsection
- EndSection
-
-To use a 32bpp screen mode, use this Screen section instead:
-
- Section "Screen"
- Identifier "Screen 1"
- Device "MGA"
- Monitor "High Res Monitor"
- DefaultDepth 24
- DefaultFbBpp 32
- Subsection "Display"
- Depth 24
- Modes "1280x1024" "1024x768" "800x600" "640x480"
- ViewPort 0 0
- EndSubsection
- EndSection
-
-The kernel module for the G200/G400 is named mga.o and should be installed in
-/lib/modules/2.4.x/kernel/drivers/char/drm/. It will be automatically loaded
-by the Xserver if needed.
-
-The DRI 3D driver for the G200/G400 should be in /usr/X11R6/lib/mod-
-ules/dri/mga_dri.so. This will be automatically loaded by libGL.so.
-
-10.3.3 Performance and Features
-
-Software rendering will be used under any of the following conditions:
-
- o Using glDrawBuffer(GL_FRONT_AND_BACK).
-
- o Using point, line, or triangle smoothing.
-
- o Using glLogicOp.
-
- o Using glPolygonStipple or glLineStipple.
-
- o Using 1D or 3D textures.
-
- o Using texture borders.
-
- o Using glDepthFunc(GL_NEVER).
-
- o Using the accumulation buffer.
-
-The AGP mode may be set to 1, 2, or 4. One is used by default. Higher AGP
-speeds may result in unreliable performance depending on your motherboard.
-
-Compaq has funded the implementation of AGP accelerated ReadPixels and Draw-
-Pixels in this driver. With this implementation, on a G400 drawing directly
-from AGP memory (exported to the client), throughput of up to 1 GB/sec has
-been measured.
-
-Additionally Compaq's funding has produced several new extensions in Mesa,
-including one (packed_depth_stencil_MESA) which enables Read/DrawPixels func-
-tionality to operate directly on the packed 24/8 depth/stencil buffers of
-this hardware.
-
-In order to access this functionality, the application must ensure that all
-pixel processing operations are disabled. There are in addition a fairly
-complex set of rules regarding which packing/unpacking modes must be used,
-and which data formats are supported, and alignment constraints. See the
-files in lib/GL/mesa/src/drv/mga/DOCS for a summary of these. The extension
-definitions are included in the Mesa 3.4 source distribution.
-
-10.3.4 IRQ Assignment
-
-There have been problems in the past with the MGA driver being very sluggish
-when the DRI is enabled (to the point of being unusable.) This is caused by
-the graphics card not having an interrupt assigned to it. The current DRI
-trunk will attempt to detect this condition and bail out gracefully.
-
-The solution to the above problem is to assign an interrupt to your graphics
-card. This is something you must turn on in your system BIOS configuration.
-Please consult your system BIOS manual for instructions on how to enable an
-interrupt for your graphics card.
-
-10.3.5 MGA HAL lib
-
-MGAHALlib.a is a binary library Matrox has provided for use under Linux to
-expose functionality for which they can not provide documentation. (For
-example TV-Out requires MacroVision be enabled on the output.) This binary
-library also sets the pixel/memory clocks to the optimal settings for your
-Matrox card.
-
-Currently the MGAHAL library is required for the G450 to work. You can down-
-load this from the driver section on Matrox's website: www.matrox.com/mga
-
-Here modifications to the DRI build instructions which make the mga ddx
-driver use the MGAHAL library:
-
- 1.Put the following define in your host.def file
- #define UseMatroxHal YES
- 2. Place mgaHALlib.a in the following directory
- xc/programs/Xserver/hw/xfree86/drivers/mga/HALlib/
-
-You can use DualHead on the G400/G450 DH cards by creating two device sec-
-tions which both point to the same BusID. For most AGP devices the BusID
-will be "PCI:1:0:0". Configure your screen section as you would normally
-configure XFree86 4.x Multihead. It should be noted that currently the sec-
-ond head does not support direct rendering.
-
-10.3.6 Known Problems
-
-None.
-
-10.4 ATI Rage 128
-
-10.4.1 Requirements
-
-A kernel with AGP GART support (such as Linux 2.4.x) is needed.
-
-10.4.2 Configuration
-
-Your XF86Config file's device section must specify the ati device:
-
- Section "Device"
- Identifier "Rage128"
- VendorName "ATI"
- Driver "ati"
- Option "AGPMode" "1"
- Option "UseCCEFor2D" "false"
- EndSection
-
-The Screen section should then reference the Rage 128 device:
-
- Section "Screen"
- Identifier "Screen 1"
- Device "Rage128"
- Monitor "High Res Monitor"
- DefaultDepth 16
- Subsection "Display"
- Depth 16
- Modes "1280x1024" "1024x768" "800x600" "640x480"
- ViewPort 0 0
- EndSubsection
- Subsection "Display"
- Depth 32
- Modes "1280x1024" "1024x768" "800x600" "640x480"
- ViewPort 0 0
- EndSubsection
- EndSection
-
-The kernel module for the Rage 128 is named r128.o and should be installed in
-/lib/modules/2.4.x/kernel/drivers/char/drm/. It will be automatically loaded
-by the Xserver if needed.
-
-The DRI 3D driver for the Rage 128 should be in /usr/X11R6/lib/mod-
-ules/dri/r128_dri.so. This will be automatically loaded by libGL.so.
-
-You may also set your screen depth to 32 for 32bpp mode.
-
-10.4.3 Performance and Features
-
-While PCI Rage 128 based cards are supported, they do not yet support PCI
-GART, so they will not perform as well as their AGP counterparts.
-
-For AGP cards, the AGP mode may be set to 1, 2, or 4. One is used by
-default. Higher AGP speeds may result in unreliable performance depending on
-your motherboard.
-
-Note that even at 32bpp there is no alpha channel.
-
-The following OpenGL features are implemented in software and will be slow:
-
- o accumulation buffer operations
-
- o stencil, when using a 16bpp screen
-
- o Blend subtract, min/max and logic op blend modes
-
- o GL_SEPARATE_SPECULAR_COLOR lighting mode
-
- o glDrawBuffer(GL_FRONT_AND_BACK)
-
- o Using 1D or 3D textures
-
- o Using texture borders
-
-10.4.4 Known Problems
-
-If you experience stability problems you may try setting the UseCCEFor2D
-option to true. This will effectively disable 2D hardware acceleration.
-Performance will be degraded, of course.
-
-10.5 ATI Radeon
-
-10.5.1 Requirements
-
-A kernel with AGP GART support (such as Linux 2.4.x) is needed.
-
-10.5.2 Configuration
-
-Your XF86Config file's device section must specify the ati device:
-
- Section "Device"
- Identifier "Radeon"
- VendorName "ATI"
- Driver "ati"
- Option "AGPMode" "1"
- EndSection
-
-The Screen section should then reference the Radeon device:
-
- Section "Screen"
- Identifier "Screen 1"
- Device "Radeon"
- Monitor "High Res Monitor"
- DefaultDepth 16
- Subsection "Display"
- Depth 16
- Modes "1280x1024" "1024x768" "800x600" "640x480"
- ViewPort 0 0
- EndSubsection
- Subsection "Display"
- Depth 32
- Modes "1280x1024" "1024x768" "800x600" "640x480"
- ViewPort 0 0
- EndSubsection
- EndSection
-
-The kernel module for the Radeon is named radeon.o and should be installed in
-/lib/modules/2.4.x/kernel/drivers/char/drm/. It will be automatically loaded
-by the Xserver if needed.
-
-The DRI 3D driver for the Radeon should be in /usr/X11R6/lib/mod-
-ules/dri/radeon_dri.so. This will be automatically loaded by libGL.so.
-
-You may also set your screen depth to 32 for 32bpp mode.
-
-10.5.3 Performance and Features
-
-While this driver supports many of the features of ATI Radeon cards, we do
-not yet fully support the card's TCL features. This work is progressing, but
-is not yet ready.
-
-The AGP mode may be set to 1, 2, or 4. One is used by default. Higher AGP
-speeds may result in unreliable performance depending on your motherboard.
-
-The following OpenGL features are implemented in software and will be slow:
-
- o Blend subtract, blend min/max and blend logicops
-
- o Stencil and accumulation operations
-
- o 1D and 3D textures
-
- o Texture borders
-
-The GL_EXT_texture_env_combine, GL_EXT_texture_env_add and GL_EXT_tex-
-ture_env_dot3 extensions are supported (or will be soon supported in the new
-driver based on Mesa 3.5).
-
-We hope to implement support for the following features in the future:
-
- o Vertex transformation, clipping and lighting (TCL)
-
- o Hardware stencil buffer
-
- o Cube map textures
-
- o 3D textures
-
- o Three texture units
-
-10.5.4 Known Problems
-
-Certain (early?) revisions of the AMD Irongate chipset have AGPGART problems
-which effect Radeon, and other graphics cards. The card may work unreliably,
-or not work at all. If the DRM kernel module is not loaded, the 2D Xserver
-may work. There's hope that this can be fixed in the future.
-
-10.6 3DLabs Oxygen GMX 2000
-
-The driver for this hardware was experimental and is no longer being devel-
-oped or supported.
-
-11. General Limitations and Known Bugs
-
-11.1 OpenGL
-
-The following OpenGL features are not supported at this time: overlays,
-stereo, hardware-accelerated indirect rendering.
-
-OpenGL-like functionality is provided with the Mesa library. XFree86 4.1.0
-uses Mesa 3.4.2. Subsequent releases of XFree86 will use newer versions of
-Mesa. When newer versions of Mesa are available, the 3D drivers can be
-updated without reinstalling XFree86 or libGL.so.
-
-11.2 GLX
-
-The GLX 1.3 API is exported but none of the new 1.3 functions are opera-
-tional.
-
-The new glXGetProcAddressARB function is fully supported.
-
-GLXPixmap rendering is only supported for indirect rendering contexts. This
-is a common OpenGL limitation. Attempting to use a direct rendering context
-with a GLXPixmap will result in an X protocol error.
-
-11.3 Debugging
-
-Debugging DRI drivers with gdb can be difficult because of the locking
-involved. When debugging OpenGL applications, you should avoid stepping
-inside the GL functions. If you're trying to debug a DRI driver it's recom-
-mended that you do so remotely, from a second system.
-
-11.4 Scheduling
-
-When you run multiple GL applications at once you may notice poor time slic-
-ing. This is due to an interaction problem with the Linux scheduler which
-will be addressed in the future.
-
-11.5 libGL.so and dlopen()
-
-A number of popular OpenGL applications on Linux (such as Quake3, HereticII,
-Heavy Gear 2, etc) dynamically open the libGL.so library at runtime with
-dlopen(), rather than linking with -lGL at compile/link time.
-
-If dynamic loading of libGL.so is not implemented carefully, there can be a
-number of serious problems. Here are the things to be careful of in your
-application:
-
- o Specify the RTLD_GLOBAL flag to dlopen(). If you don't do this then
- you'll likely see a runtime error message complaining that _glapi_Con-
- text is undefined when libGL.so tries to open a hardware-specific
- driver. Without this flag, nested opening of dynamic libraries does not
- work.
-
- o Do not close the library with dlclose() until after XCloseDisplay() has
- been called. When libGL.so initializes itself it registers several
- callbacks functions with Xlib. When XCloseDisplay() is called those
- callback functions are called. If libGL.so has already been unloaded
- with dlclose() this will cause a segmentation fault.
-
- o Your application should link with -lpthread. On Linux, libGL.so uses
- the pthreads library in order to provide thread safety. There is appar-
- ently a bug in the dlopen()/dlclose() code which causes crashes if the
- library uses pthreads but the parent application doesn't. The only
- known work-around is to link the application with -lpthread.
-
-Some applications don't yet incorporate these procedures and may fail. For
-example, changing the graphics settings in some video games will expose this
-problem. The DRI developers are working with game vendors to prevent this
-problem in the future.
-
-11.6 Bug Database
-
-The DRI bug database which includes bugs related to specific drivers is at
-the SourceForge DRI Bug Database
-
-Please scan both the open and closed bug lists to determine if your problem
-has already been reported and perhaps fixed.
-
-12. Resources
-
-12.1 Software
-
-A collection of useful configuration files, libraries, headers, utilities and
-demo programs is available from http://dri.sourceforge.net/res.phtml
-
-12.2 Documentation
-
- o General OpenGL information is available at the OpenGL Home Page
-
- o XFree86 information is available at the XFree86 Home Page
-
- o Information about the design of the DRI is available from Precision
- Insight, Inc.
-
- o Visit the DRI project on SourceForge.net for the latest development news
- about the DRI and 3D drivers.
-
- o The DRI Compilation Guide explains how to download, compile and install
- the DRI for yourself.
-
-12.3 Support
-
- o The DRI-users mailing list at SourceForge is a forum for people to dis-
- cuss DRI problems.
-
- o In the future there may be IHV and Linux vendor support resources for
- the DRI.
-
- Generated from XFree86: xc/programs/Xserver/hw/xfree86/doc/sgml/DRI.sgml,v 1.28 dawes Exp $
-
-
diff --git a/xorg-server/hw/xfree86/doc/README.rapidaccess b/xorg-server/hw/xfree86/doc/README.rapidaccess
deleted file mode 100644
index 39f515ee2..000000000
--- a/xorg-server/hw/xfree86/doc/README.rapidaccess
+++ /dev/null
@@ -1,48 +0,0 @@
-The IBM Rapid Access keyboard have some extra buttons
-on it to launch programs, control a cd-player and so on.
-
-These buttons is not functional when the computer is turned
-on but have to be activated by sending the codes 0xea 0x71
-to it.
-
-I've written the following hack to send codes to the keyboard:
-
---------------------------------------------------------------
-/* gcc -O2 -s -Wall -osend_to_keyboard send_to_keyboard.c */
-#include <stdlib.h>
-#include <unistd.h>
-#include <sys/io.h>
-
-int main( int argc, char *argv[] )
-{
- int i;
-
- ioperm( 0x60, 3, 1 );
-
- for( i = 1; i < argc; i++ ) {
- int x = strtol( argv[i], 0, 16 );
-
- usleep( 300 );
- outb( x, 0x60 );
- }
-
- return 0;
-}
---------------------------------------------------------------
-
-As root you can then call this program (in your boot scripts)
-as "send_to_keyboard ea 71" to turn on the extra buttons.
-
-It's not a good idea to run several instances of this program
-at the same time. It is a hack but it works. If you try to
-send other codes to the keyboard it probably will lock up.
-For other codes see:
-
-http://www.win.tue.nl/~aeb/linux/kbd/scancodes-2.html#ss2.22
-
---
-Dennis Björklund <db@zigo.dhs.org>
-
-
-
-$XFree86$
diff --git a/xorg-server/hw/xfree86/doc/man/xorg.conf.man.pre b/xorg-server/hw/xfree86/doc/man/xorg.conf.man.pre
index 2eb52ae4d..bf1adc4e8 100644
--- a/xorg-server/hw/xfree86/doc/man/xorg.conf.man.pre
+++ b/xorg-server/hw/xfree86/doc/man/xorg.conf.man.pre
@@ -2342,8 +2342,7 @@ section for a dual headed configuration with two mice:
.SH "DRI SECTION"
This optional section is used to provide some information for the
Direct Rendering Infrastructure.
-Details about the format of this section
-can be found in the README.DRI document, which is also available on-line at
+Details about the format of this section can be found on-line at
.IR <http://dri.freedesktop.org/> .
.SH "VENDOR SECTION"
The optional
diff --git a/xorg-server/hw/xfree86/modes/xf86Crtc.c b/xorg-server/hw/xfree86/modes/xf86Crtc.c
index 417a75ff6..5705d7da3 100644
--- a/xorg-server/hw/xfree86/modes/xf86Crtc.c
+++ b/xorg-server/hw/xfree86/modes/xf86Crtc.c
@@ -46,6 +46,8 @@
#include "xf86xv.h"
+#define NO_OUTPUT_DEFAULT_WIDTH 1024
+#define NO_OUTPUT_DEFAULT_HEIGHT 768
/*
* Initialize xf86CrtcConfig structure
*/
@@ -1923,7 +1925,7 @@ xf86SetScrnInfoModes (ScrnInfoPtr scrn)
#endif
}
-static void
+static Bool
xf86CollectEnabledOutputs(ScrnInfoPtr scrn, xf86CrtcConfigPtr config,
Bool *enabled)
{
@@ -1938,8 +1940,10 @@ xf86CollectEnabledOutputs(ScrnInfoPtr scrn, xf86CrtcConfigPtr config,
"No outputs definitely connected, trying again...\n");
for (o = 0; o < config->num_output; o++)
- enabled[o] = xf86OutputEnabled(config->output[o], FALSE);
+ any_enabled |= enabled[o] = xf86OutputEnabled(config->output[o], FALSE);
}
+
+ return any_enabled;
}
static Bool
@@ -2339,6 +2343,8 @@ xf86InitialConfiguration (ScrnInfoPtr scrn, Bool canGrow)
Bool *enabled;
int width, height;
int i = scrn->scrnIndex;
+ Bool have_outputs = TRUE;
+ Bool ret;
/* Set up the device options */
config->options = xnfalloc (sizeof (xf86DeviceOptions));
@@ -2364,18 +2370,23 @@ xf86InitialConfiguration (ScrnInfoPtr scrn, Bool canGrow)
modes = xnfcalloc (config->num_output, sizeof (DisplayModePtr));
enabled = xnfcalloc (config->num_output, sizeof (Bool));
- xf86CollectEnabledOutputs(scrn, config, enabled);
-
- if (xf86TargetUserpref(scrn, config, modes, enabled, width, height))
- xf86DrvMsg(i, X_INFO, "Using user preference for initial modes\n");
- else if (xf86TargetPreferred(scrn, config, modes, enabled, width, height))
- xf86DrvMsg(i, X_INFO, "Using exact sizes for initial modes\n");
- else if (xf86TargetAspect(scrn, config, modes, enabled, width, height))
- xf86DrvMsg(i, X_INFO, "Using fuzzy aspect match for initial modes\n");
- else if (xf86TargetFallback(scrn, config, modes, enabled, width, height))
- xf86DrvMsg(i, X_INFO, "Using sloppy heuristic for initial modes\n");
- else
- xf86DrvMsg(i, X_WARNING, "Unable to find initial modes\n");
+ ret = xf86CollectEnabledOutputs(scrn, config, enabled);
+ if (ret == FALSE && canGrow) {
+ xf86DrvMsg(i, X_WARNING, "Unable to find connected outputs - setting %dx%d initial framebuffer\n",
+ NO_OUTPUT_DEFAULT_WIDTH, NO_OUTPUT_DEFAULT_HEIGHT);
+ have_outputs = FALSE;
+ } else {
+ if (xf86TargetUserpref(scrn, config, modes, enabled, width, height))
+ xf86DrvMsg(i, X_INFO, "Using user preference for initial modes\n");
+ else if (xf86TargetPreferred(scrn, config, modes, enabled, width, height))
+ xf86DrvMsg(i, X_INFO, "Using exact sizes for initial modes\n");
+ else if (xf86TargetAspect(scrn, config, modes, enabled, width, height))
+ xf86DrvMsg(i, X_INFO, "Using fuzzy aspect match for initial modes\n");
+ else if (xf86TargetFallback(scrn, config, modes, enabled, width, height))
+ xf86DrvMsg(i, X_INFO, "Using sloppy heuristic for initial modes\n");
+ else
+ xf86DrvMsg(i, X_WARNING, "Unable to find initial modes\n");
+ }
for (o = -1; nextEnabledOutput(config, enabled, &o); ) {
if (!modes[o])
@@ -2406,7 +2417,7 @@ xf86InitialConfiguration (ScrnInfoPtr scrn, Bool canGrow)
/*
* Assign CRTCs to fit output configuration
*/
- if (!xf86PickCrtcs (scrn, crtcs, modes, 0, width, height))
+ if (have_outputs && !xf86PickCrtcs (scrn, crtcs, modes, 0, width, height))
{
free(crtcs);
free(modes);
@@ -2468,6 +2479,13 @@ xf86InitialConfiguration (ScrnInfoPtr scrn, Bool canGrow)
*/
xf86DefaultScreenLimits (scrn, &width, &height, canGrow);
+ if (have_outputs == FALSE) {
+ if (width < NO_OUTPUT_DEFAULT_WIDTH && height < NO_OUTPUT_DEFAULT_HEIGHT) {
+ width = NO_OUTPUT_DEFAULT_WIDTH;
+ height = NO_OUTPUT_DEFAULT_HEIGHT;
+ }
+ }
+
scrn->display->virtualX = width;
scrn->display->virtualY = height;
}
@@ -2493,8 +2511,17 @@ xf86InitialConfiguration (ScrnInfoPtr scrn, Bool canGrow)
width, height);
}
- /* Mirror output modes to scrn mode list */
- xf86SetScrnInfoModes (scrn);
+ if (have_outputs) {
+ /* Mirror output modes to scrn mode list */
+ xf86SetScrnInfoModes (scrn);
+ } else {
+ /* Clear any existing modes from scrn->modes */
+ while (scrn->modes != NULL)
+ xf86DeleteMode(&scrn->modes, scrn->modes);
+ scrn->modes = xf86ModesAdd(scrn->modes,
+ xf86CVTMode(width, height, 60, 0, 0));
+ }
+
free(crtcs);
free(modes);
diff --git a/xorg-server/hw/xfree86/os-support/bus/Pci.c b/xorg-server/hw/xfree86/os-support/bus/Pci.c
index b7fa25f71..7151cc885 100644
--- a/xorg-server/hw/xfree86/os-support/bus/Pci.c
+++ b/xorg-server/hw/xfree86/os-support/bus/Pci.c
@@ -1,158 +1,157 @@
-/*
- * Copyright 1998 by Concurrent Computer Corporation
- *
- * Permission to use, copy, modify, distribute, and sell this software
- * and its documentation for any purpose is hereby granted without fee,
- * provided that the above copyright notice appear in all copies and that
- * both that copyright notice and this permission notice appear in
- * supporting documentation, and that the name of Concurrent Computer
- * Corporation not be used in advertising or publicity pertaining to
- * distribution of the software without specific, written prior
- * permission. Concurrent Computer Corporation makes no representations
- * about the suitability of this software for any purpose. It is
- * provided "as is" without express or implied warranty.
- *
- * CONCURRENT COMPUTER CORPORATION DISCLAIMS ALL WARRANTIES WITH REGARD
- * TO THIS SOFTWARE, INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY
- * AND FITNESS, IN NO EVENT SHALL CONCURRENT COMPUTER CORPORATION BE
- * LIABLE FOR ANY SPECIAL, INDIRECT OR CONSEQUENTIAL DAMAGES OR ANY
- * DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS,
- * WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION,
- * ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS
- * SOFTWARE.
- *
- * Copyright 1998 by Metro Link Incorporated
- *
- * Permission to use, copy, modify, distribute, and sell this software
- * and its documentation for any purpose is hereby granted without fee,
- * provided that the above copyright notice appear in all copies and that
- * both that copyright notice and this permission notice appear in
- * supporting documentation, and that the name of Metro Link
- * Incorporated not be used in advertising or publicity pertaining to
- * distribution of the software without specific, written prior
- * permission. Metro Link Incorporated makes no representations
- * about the suitability of this software for any purpose. It is
- * provided "as is" without express or implied warranty.
- *
- * METRO LINK INCORPORATED DISCLAIMS ALL WARRANTIES WITH REGARD
- * TO THIS SOFTWARE, INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY
- * AND FITNESS, IN NO EVENT SHALL METRO LINK INCORPORATED BE
- * LIABLE FOR ANY SPECIAL, INDIRECT OR CONSEQUENTIAL DAMAGES OR ANY
- * DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS,
- * WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION,
- * ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS
- * SOFTWARE.
- *
- * This software is derived from the original XFree86 PCI code
- * which includes the following copyright notices as well:
- *
- * Copyright 1995 by Robin Cutshaw <robin@XFree86.Org>
- *
- * Permission to use, copy, modify, distribute, and sell this software and its
- * documentation for any purpose is hereby granted without fee, provided that
- * the above copyright notice appear in all copies and that both that
- * copyright notice and this permission notice appear in supporting
- * documentation, and that the names of the above listed copyright holder(s)
- * not be used in advertising or publicity pertaining to distribution of
- * the software without specific, written prior permission. The above listed
- * copyright holder(s) make(s) no representations about the suitability of this
- * software for any purpose. It is provided "as is" without express or
- * implied warranty.
- *
- * THE ABOVE LISTED COPYRIGHT HOLDER(S) DISCLAIM(S) ALL WARRANTIES WITH REGARD
- * TO THIS SOFTWARE, INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY
- * AND FITNESS, IN NO EVENT SHALL THE ABOVE LISTED COPYRIGHT HOLDER(S) BE
- * LIABLE FOR ANY SPECIAL, INDIRECT OR CONSEQUENTIAL DAMAGES OR ANY
- * DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER
- * IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING
- * OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
- *
- * This code is also based heavily on the code in FreeBSD-current, which was
- * written by Wolfgang Stanglmeier, and contains the following copyright:
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- * notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- * notice, this list of conditions and the following disclaimer in the
- * documentation and/or other materials provided with the distribution.
- * 3. The name of the author may not be used to endorse or promote products
- * derived from this software without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
- * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
- * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
- * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
- * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
- * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- */
-/*
- * Copyright (c) 1999-2003 by The XFree86 Project, Inc.
- *
- * Permission is hereby granted, free of charge, to any person obtaining a
- * copy of this software and associated documentation files (the "Software"),
- * to deal in the Software without restriction, including without limitation
- * the rights to use, copy, modify, merge, publish, distribute, sublicense,
- * and/or sell copies of the Software, and to permit persons to whom the
- * Software is furnished to do so, subject to the following conditions:
- *
- * The above copyright notice and this permission notice shall be included in
- * all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
- * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
- * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
- * THE COPYRIGHT HOLDER(S) OR AUTHOR(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR
- * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
- * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- * OTHER DEALINGS IN THE SOFTWARE.
- *
- * Except as contained in this notice, the name of the copyright holder(s)
- * and author(s) shall not be used in advertising or otherwise to promote
- * the sale, use or other dealings in this Software without prior written
- * authorization from the copyright holder(s) and author(s).
- */
-
-#ifdef HAVE_XORG_CONFIG_H
-#include <xorg-config.h>
-#endif
-
-#include <errno.h>
-#include <signal.h>
-#include <X11/Xarch.h>
-#include "compiler.h"
-#include "xf86.h"
-#include "xf86Priv.h"
-#define XF86_OS_PRIVS
-#include "xf86_OSproc.h"
-#include "Pci.h"
-
-#include <pciaccess.h>
-
-/* Global data */
-
-PCITAG
-pciTag(int busnum, int devnum, int funcnum)
-{
- return(PCI_MAKE_TAG(busnum,devnum,funcnum));
-}
-
-Bool
-xf86scanpci(void)
-{
- Bool success = FALSE;
-
- success = (pci_system_init() == 0);
-
- /* choose correct platform/OS specific PCI init routine */
- ARCH_PCI_INIT();
-
- return success;
-}
+/*
+ * Copyright 1998 by Concurrent Computer Corporation
+ *
+ * Permission to use, copy, modify, distribute, and sell this software
+ * and its documentation for any purpose is hereby granted without fee,
+ * provided that the above copyright notice appear in all copies and that
+ * both that copyright notice and this permission notice appear in
+ * supporting documentation, and that the name of Concurrent Computer
+ * Corporation not be used in advertising or publicity pertaining to
+ * distribution of the software without specific, written prior
+ * permission. Concurrent Computer Corporation makes no representations
+ * about the suitability of this software for any purpose. It is
+ * provided "as is" without express or implied warranty.
+ *
+ * CONCURRENT COMPUTER CORPORATION DISCLAIMS ALL WARRANTIES WITH REGARD
+ * TO THIS SOFTWARE, INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY
+ * AND FITNESS, IN NO EVENT SHALL CONCURRENT COMPUTER CORPORATION BE
+ * LIABLE FOR ANY SPECIAL, INDIRECT OR CONSEQUENTIAL DAMAGES OR ANY
+ * DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS,
+ * WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION,
+ * ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS
+ * SOFTWARE.
+ *
+ * Copyright 1998 by Metro Link Incorporated
+ *
+ * Permission to use, copy, modify, distribute, and sell this software
+ * and its documentation for any purpose is hereby granted without fee,
+ * provided that the above copyright notice appear in all copies and that
+ * both that copyright notice and this permission notice appear in
+ * supporting documentation, and that the name of Metro Link
+ * Incorporated not be used in advertising or publicity pertaining to
+ * distribution of the software without specific, written prior
+ * permission. Metro Link Incorporated makes no representations
+ * about the suitability of this software for any purpose. It is
+ * provided "as is" without express or implied warranty.
+ *
+ * METRO LINK INCORPORATED DISCLAIMS ALL WARRANTIES WITH REGARD
+ * TO THIS SOFTWARE, INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY
+ * AND FITNESS, IN NO EVENT SHALL METRO LINK INCORPORATED BE
+ * LIABLE FOR ANY SPECIAL, INDIRECT OR CONSEQUENTIAL DAMAGES OR ANY
+ * DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS,
+ * WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION,
+ * ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS
+ * SOFTWARE.
+ *
+ * This software is derived from the original XFree86 PCI code
+ * which includes the following copyright notices as well:
+ *
+ * Copyright 1995 by Robin Cutshaw <robin@XFree86.Org>
+ *
+ * Permission to use, copy, modify, distribute, and sell this software and its
+ * documentation for any purpose is hereby granted without fee, provided that
+ * the above copyright notice appear in all copies and that both that
+ * copyright notice and this permission notice appear in supporting
+ * documentation, and that the names of the above listed copyright holder(s)
+ * not be used in advertising or publicity pertaining to distribution of
+ * the software without specific, written prior permission. The above listed
+ * copyright holder(s) make(s) no representations about the suitability of this
+ * software for any purpose. It is provided "as is" without express or
+ * implied warranty.
+ *
+ * THE ABOVE LISTED COPYRIGHT HOLDER(S) DISCLAIM(S) ALL WARRANTIES WITH REGARD
+ * TO THIS SOFTWARE, INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY
+ * AND FITNESS, IN NO EVENT SHALL THE ABOVE LISTED COPYRIGHT HOLDER(S) BE
+ * LIABLE FOR ANY SPECIAL, INDIRECT OR CONSEQUENTIAL DAMAGES OR ANY
+ * DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER
+ * IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING
+ * OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ *
+ * This code is also based heavily on the code in FreeBSD-current, which was
+ * written by Wolfgang Stanglmeier, and contains the following copyright:
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * 3. The name of the author may not be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
+ * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
+ * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
+ * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ */
+/*
+ * Copyright (c) 1999-2003 by The XFree86 Project, Inc.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+ * THE COPYRIGHT HOLDER(S) OR AUTHOR(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR
+ * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
+ * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ *
+ * Except as contained in this notice, the name of the copyright holder(s)
+ * and author(s) shall not be used in advertising or otherwise to promote
+ * the sale, use or other dealings in this Software without prior written
+ * authorization from the copyright holder(s) and author(s).
+ */
+
+#ifdef HAVE_XORG_CONFIG_H
+#include <xorg-config.h>
+#endif
+
+#include <errno.h>
+#include <signal.h>
+#include "compiler.h"
+#include "xf86.h"
+#include "xf86Priv.h"
+#define XF86_OS_PRIVS
+#include "xf86_OSproc.h"
+#include "Pci.h"
+
+#include <pciaccess.h>
+
+/* Global data */
+
+PCITAG
+pciTag(int busnum, int devnum, int funcnum)
+{
+ return(PCI_MAKE_TAG(busnum,devnum,funcnum));
+}
+
+Bool
+xf86scanpci(void)
+{
+ Bool success = FALSE;
+
+ success = (pci_system_init() == 0);
+
+ /* choose correct platform/OS specific PCI init routine */
+ ARCH_PCI_INIT();
+
+ return success;
+}
diff --git a/xorg-server/hw/xfree86/os-support/bus/Pci.h b/xorg-server/hw/xfree86/os-support/bus/Pci.h
index b52a6cfae..618dd3783 100644
--- a/xorg-server/hw/xfree86/os-support/bus/Pci.h
+++ b/xorg-server/hw/xfree86/os-support/bus/Pci.h
@@ -1,169 +1,161 @@
-/*
- * Copyright 1998 by Concurrent Computer Corporation
- *
- * Permission to use, copy, modify, distribute, and sell this software
- * and its documentation for any purpose is hereby granted without fee,
- * provided that the above copyright notice appear in all copies and that
- * both that copyright notice and this permission notice appear in
- * supporting documentation, and that the name of Concurrent Computer
- * Corporation not be used in advertising or publicity pertaining to
- * distribution of the software without specific, written prior
- * permission. Concurrent Computer Corporation makes no representations
- * about the suitability of this software for any purpose. It is
- * provided "as is" without express or implied warranty.
- *
- * CONCURRENT COMPUTER CORPORATION DISCLAIMS ALL WARRANTIES WITH REGARD
- * TO THIS SOFTWARE, INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY
- * AND FITNESS, IN NO EVENT SHALL CONCURRENT COMPUTER CORPORATION BE
- * LIABLE FOR ANY SPECIAL, INDIRECT OR CONSEQUENTIAL DAMAGES OR ANY
- * DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS,
- * WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION,
- * ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS
- * SOFTWARE.
- *
- * Copyright 1998 by Metro Link Incorporated
- *
- * Permission to use, copy, modify, distribute, and sell this software
- * and its documentation for any purpose is hereby granted without fee,
- * provided that the above copyright notice appear in all copies and that
- * both that copyright notice and this permission notice appear in
- * supporting documentation, and that the name of Metro Link
- * Incorporated not be used in advertising or publicity pertaining to
- * distribution of the software without specific, written prior
- * permission. Metro Link Incorporated makes no representations
- * about the suitability of this software for any purpose. It is
- * provided "as is" without express or implied warranty.
- *
- * METRO LINK INCORPORATED DISCLAIMS ALL WARRANTIES WITH REGARD
- * TO THIS SOFTWARE, INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY
- * AND FITNESS, IN NO EVENT SHALL METRO LINK INCORPORATED BE
- * LIABLE FOR ANY SPECIAL, INDIRECT OR CONSEQUENTIAL DAMAGES OR ANY
- * DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS,
- * WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION,
- * ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS
- * SOFTWARE.
- *
- * This file is derived in part from the original xf86_PCI.h that included
- * following copyright message:
- *
- * Copyright 1995 by Robin Cutshaw <robin@XFree86.Org>
- *
- * Permission to use, copy, modify, distribute, and sell this software and its
- * documentation for any purpose is hereby granted without fee, provided that
- * the above copyright notice appear in all copies and that both that
- * copyright notice and this permission notice appear in supporting
- * documentation, and that the names of the above listed copyright holder(s)
- * not be used in advertising or publicity pertaining to distribution of
- * the software without specific, written prior permission. The above listed
- * copyright holder(s) make(s) no representations about the suitability of this
- * software for any purpose. It is provided "as is" without express or
- * implied warranty.
- *
- * THE ABOVE LISTED COPYRIGHT HOLDER(S) DISCLAIM(S) ALL WARRANTIES WITH REGARD
- * TO THIS SOFTWARE, INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY
- * AND FITNESS, IN NO EVENT SHALL THE ABOVE LISTED COPYRIGHT HOLDER(S) BE
- * LIABLE FOR ANY SPECIAL, INDIRECT OR CONSEQUENTIAL DAMAGES OR ANY
- * DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER
- * IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING
- * OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
- *
- */
-/*
- * Copyright (c) 1999-2003 by The XFree86 Project, Inc.
- *
- * Permission is hereby granted, free of charge, to any person obtaining a
- * copy of this software and associated documentation files (the "Software"),
- * to deal in the Software without restriction, including without limitation
- * the rights to use, copy, modify, merge, publish, distribute, sublicense,
- * and/or sell copies of the Software, and to permit persons to whom the
- * Software is furnished to do so, subject to the following conditions:
- *
- * The above copyright notice and this permission notice shall be included in
- * all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
- * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
- * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
- * THE COPYRIGHT HOLDER(S) OR AUTHOR(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR
- * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
- * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- * OTHER DEALINGS IN THE SOFTWARE.
- *
- * Except as contained in this notice, the name of the copyright holder(s)
- * and author(s) shall not be used in advertising or otherwise to promote
- * the sale, use or other dealings in this Software without prior written
- * authorization from the copyright holder(s) and author(s).
- */
-
-
-/*
- * This file has the private Pci definitions. The public ones are imported
- * from xf86Pci.h. Drivers should not use this file.
- */
-#ifdef HAVE_XORG_CONFIG_H
-#include <xorg-config.h>
-#endif
-
-#ifndef _PCI_H
-#define _PCI_H 1
-
-#include <X11/Xarch.h>
-#include <X11/Xfuncproto.h>
-#include "xf86Pci.h"
-#include "xf86PciInfo.h"
-
-/*
- * Global Definitions
- */
-#if (defined(__alpha__) || defined(__ia64__)) && defined (linux)
-#define PCI_DOM_MASK 0x01fful
-#else
-#define PCI_DOM_MASK 0x0ffu
-#endif
-
-#define DEVID(vendor, device) \
- ((CARD32)((PCI_##device << 16) | PCI_##vendor))
-
-#ifndef PCI_DOM_MASK
-# define PCI_DOM_MASK 0x0ffu
-#endif
-#define PCI_DOMBUS_MASK (((PCI_DOM_MASK) << 8) | 0x0ffu)
-
-/*
- * "b" contains an optional domain number.
- */
-#define PCI_MAKE_TAG(b,d,f) ((((b) & (PCI_DOMBUS_MASK)) << 16) | \
- (((d) & 0x00001fu) << 11) | \
- (((f) & 0x000007u) << 8))
-
-#define PCI_MAKE_BUS(d,b) ((((d) & (PCI_DOM_MASK)) << 8) | ((b) & 0xffu))
-
-#define PCI_DOM_FROM_TAG(tag) (((tag) >> 24) & (PCI_DOM_MASK))
-#define PCI_BUS_FROM_TAG(tag) (((tag) >> 16) & (PCI_DOMBUS_MASK))
-#define PCI_DEV_FROM_TAG(tag) (((tag) & 0x0000f800u) >> 11)
-#define PCI_FUNC_FROM_TAG(tag) (((tag) & 0x00000700u) >> 8)
-
-#define PCI_DFN_FROM_TAG(tag) (((tag) & 0x0000ff00u) >> 8)
-#define PCI_BDEV_FROM_TAG(tag) ((tag) & 0x00fff800u)
-
-#define PCI_DOM_FROM_BUS(bus) (((bus) >> 8) & (PCI_DOM_MASK))
-#define PCI_BUS_NO_DOMAIN(bus) ((bus) & 0xffu)
-#define PCI_TAG_NO_DOMAIN(tag) ((tag) & 0x00ffff00u)
-
-#if defined(__FreeBSD__) || defined(__FreeBSD_kernel__) || \
- defined(__OpenBSD__) || defined(__NetBSD__) || \
- defined(__DragonFly__) || defined(__sun) || defined(__GNU__)
-#define ARCH_PCI_INIT bsdPciInit
-#endif
-
-#if defined(linux)
-#define ARCH_PCI_INIT linuxPciInit
-#endif /* defined(linux) */
-
-#ifndef ARCH_PCI_INIT
-#error No PCI support available for this architecture/OS combination
-#endif
-
-extern void ARCH_PCI_INIT(void);
-
-#endif /* _PCI_H */
+/*
+ * Copyright 1998 by Concurrent Computer Corporation
+ *
+ * Permission to use, copy, modify, distribute, and sell this software
+ * and its documentation for any purpose is hereby granted without fee,
+ * provided that the above copyright notice appear in all copies and that
+ * both that copyright notice and this permission notice appear in
+ * supporting documentation, and that the name of Concurrent Computer
+ * Corporation not be used in advertising or publicity pertaining to
+ * distribution of the software without specific, written prior
+ * permission. Concurrent Computer Corporation makes no representations
+ * about the suitability of this software for any purpose. It is
+ * provided "as is" without express or implied warranty.
+ *
+ * CONCURRENT COMPUTER CORPORATION DISCLAIMS ALL WARRANTIES WITH REGARD
+ * TO THIS SOFTWARE, INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY
+ * AND FITNESS, IN NO EVENT SHALL CONCURRENT COMPUTER CORPORATION BE
+ * LIABLE FOR ANY SPECIAL, INDIRECT OR CONSEQUENTIAL DAMAGES OR ANY
+ * DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS,
+ * WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION,
+ * ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS
+ * SOFTWARE.
+ *
+ * Copyright 1998 by Metro Link Incorporated
+ *
+ * Permission to use, copy, modify, distribute, and sell this software
+ * and its documentation for any purpose is hereby granted without fee,
+ * provided that the above copyright notice appear in all copies and that
+ * both that copyright notice and this permission notice appear in
+ * supporting documentation, and that the name of Metro Link
+ * Incorporated not be used in advertising or publicity pertaining to
+ * distribution of the software without specific, written prior
+ * permission. Metro Link Incorporated makes no representations
+ * about the suitability of this software for any purpose. It is
+ * provided "as is" without express or implied warranty.
+ *
+ * METRO LINK INCORPORATED DISCLAIMS ALL WARRANTIES WITH REGARD
+ * TO THIS SOFTWARE, INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY
+ * AND FITNESS, IN NO EVENT SHALL METRO LINK INCORPORATED BE
+ * LIABLE FOR ANY SPECIAL, INDIRECT OR CONSEQUENTIAL DAMAGES OR ANY
+ * DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS,
+ * WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION,
+ * ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS
+ * SOFTWARE.
+ *
+ * This file is derived in part from the original xf86_PCI.h that included
+ * following copyright message:
+ *
+ * Copyright 1995 by Robin Cutshaw <robin@XFree86.Org>
+ *
+ * Permission to use, copy, modify, distribute, and sell this software and its
+ * documentation for any purpose is hereby granted without fee, provided that
+ * the above copyright notice appear in all copies and that both that
+ * copyright notice and this permission notice appear in supporting
+ * documentation, and that the names of the above listed copyright holder(s)
+ * not be used in advertising or publicity pertaining to distribution of
+ * the software without specific, written prior permission. The above listed
+ * copyright holder(s) make(s) no representations about the suitability of this
+ * software for any purpose. It is provided "as is" without express or
+ * implied warranty.
+ *
+ * THE ABOVE LISTED COPYRIGHT HOLDER(S) DISCLAIM(S) ALL WARRANTIES WITH REGARD
+ * TO THIS SOFTWARE, INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY
+ * AND FITNESS, IN NO EVENT SHALL THE ABOVE LISTED COPYRIGHT HOLDER(S) BE
+ * LIABLE FOR ANY SPECIAL, INDIRECT OR CONSEQUENTIAL DAMAGES OR ANY
+ * DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER
+ * IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING
+ * OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ *
+ */
+/*
+ * Copyright (c) 1999-2003 by The XFree86 Project, Inc.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+ * THE COPYRIGHT HOLDER(S) OR AUTHOR(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR
+ * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
+ * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ *
+ * Except as contained in this notice, the name of the copyright holder(s)
+ * and author(s) shall not be used in advertising or otherwise to promote
+ * the sale, use or other dealings in this Software without prior written
+ * authorization from the copyright holder(s) and author(s).
+ */
+
+
+/*
+ * This file has the private Pci definitions. The public ones are imported
+ * from xf86Pci.h. Drivers should not use this file.
+ */
+#ifdef HAVE_XORG_CONFIG_H
+#include <xorg-config.h>
+#endif
+
+#ifndef _PCI_H
+#define _PCI_H 1
+
+#include "xf86Pci.h"
+#include "xf86PciInfo.h"
+
+/*
+ * Global Definitions
+ */
+#if (defined(__alpha__) || defined(__ia64__)) && defined (linux)
+#define PCI_DOM_MASK 0x01fful
+#else
+#define PCI_DOM_MASK 0x0ffu
+#endif
+
+#ifndef PCI_DOM_MASK
+# define PCI_DOM_MASK 0x0ffu
+#endif
+#define PCI_DOMBUS_MASK (((PCI_DOM_MASK) << 8) | 0x0ffu)
+
+/*
+ * "b" contains an optional domain number.
+ */
+#define PCI_MAKE_TAG(b,d,f) ((((b) & (PCI_DOMBUS_MASK)) << 16) | \
+ (((d) & 0x00001fu) << 11) | \
+ (((f) & 0x000007u) << 8))
+
+#define PCI_MAKE_BUS(d,b) ((((d) & (PCI_DOM_MASK)) << 8) | ((b) & 0xffu))
+
+#define PCI_DOM_FROM_TAG(tag) (((tag) >> 24) & (PCI_DOM_MASK))
+#define PCI_BUS_FROM_TAG(tag) (((tag) >> 16) & (PCI_DOMBUS_MASK))
+#define PCI_DEV_FROM_TAG(tag) (((tag) & 0x0000f800u) >> 11)
+#define PCI_FUNC_FROM_TAG(tag) (((tag) & 0x00000700u) >> 8)
+
+#define PCI_DOM_FROM_BUS(bus) (((bus) >> 8) & (PCI_DOM_MASK))
+#define PCI_BUS_NO_DOMAIN(bus) ((bus) & 0xffu)
+#define PCI_TAG_NO_DOMAIN(tag) ((tag) & 0x00ffff00u)
+
+#if defined(__FreeBSD__) || defined(__FreeBSD_kernel__) || \
+ defined(__OpenBSD__) || defined(__NetBSD__) || \
+ defined(__DragonFly__) || defined(__sun) || defined(__GNU__)
+#define ARCH_PCI_INIT bsdPciInit
+#endif
+
+#if defined(linux)
+#define ARCH_PCI_INIT linuxPciInit
+#endif /* defined(linux) */
+
+#ifndef ARCH_PCI_INIT
+#error No PCI support available for this architecture/OS combination
+#endif
+
+extern void ARCH_PCI_INIT(void);
+
+#endif /* _PCI_H */
diff --git a/xorg-server/hw/xfree86/vbe/vbe.c b/xorg-server/hw/xfree86/vbe/vbe.c
index bb88b86cf..21fe0c812 100644
--- a/xorg-server/hw/xfree86/vbe/vbe.c
+++ b/xorg-server/hw/xfree86/vbe/vbe.c
@@ -17,7 +17,6 @@
#include "xf86.h"
#include "vbe.h"
-#include <X11/Xarch.h>
#include <X11/extensions/dpmsconst.h>
#define VERSION(x) VBE_VERSION_MAJOR(x),VBE_VERSION_MINOR(x)
diff --git a/xorg-server/hw/xfree86/vbe/vbe.h b/xorg-server/hw/xfree86/vbe/vbe.h
index 4786709ea..5bb163df8 100644
--- a/xorg-server/hw/xfree86/vbe/vbe.h
+++ b/xorg-server/hw/xfree86/vbe/vbe.h
@@ -65,7 +65,7 @@ typedef struct vbeControllerInfoBlock {
#pragma pack(0)
#endif
-#ifndef __GNUC__
+#if !( defined(__GNUC__) || (defined(__SUNPRO_C) && (__SUNPRO_C >= 0x590)) )
#define __attribute__(a)
#endif
diff --git a/xorg-server/mi/midispcur.c b/xorg-server/mi/midispcur.c
index d8fe26ada..8b26765a8 100644
--- a/xorg-server/mi/midispcur.c
+++ b/xorg-server/mi/midispcur.c
@@ -742,7 +742,7 @@ miDCDeviceInitialize(DeviceIntPtr pDev, ScreenPtr pScreen)
{
pScreen = screenInfo.screens[i];
- pBuffer = malloc(sizeof(miDCBufferRec));
+ pBuffer = calloc(1, sizeof(miDCBufferRec));
if (!pBuffer)
goto failure;
diff --git a/xorg-server/xfixes/cursor.c b/xorg-server/xfixes/cursor.c
index 5f0fe9c88..c2c489e3f 100644
--- a/xorg-server/xfixes/cursor.c
+++ b/xorg-server/xfixes/cursor.c
@@ -60,7 +60,6 @@ static RESTYPE CursorClientType;
static RESTYPE CursorHideCountType;
static RESTYPE CursorWindowType;
static CursorPtr CursorCurrent[MAXDEVICES];
-static CursorPtr pInvisibleCursor = NULL;
static int CursorScreenPrivateKeyIndex;
static DevPrivateKey CursorScreenPrivateKey = &CursorScreenPrivateKeyIndex;
@@ -150,8 +149,7 @@ CursorDisplayCursor (DeviceIntPtr pDev,
CursorVisible = EnableCursor;
if (cs->pCursorHideCounts != NULL || !CursorVisible) {
- ret = ((*pScreen->RealizeCursor)(pDev, pScreen, pInvisibleCursor) &&
- (*pScreen->DisplayCursor) (pDev, pScreen, pInvisibleCursor));
+ ret = (*pScreen->DisplayCursor) (pDev, pScreen, NullCursor);
} else {
ret = (*pScreen->DisplayCursor) (pDev, pScreen, pCursor);
}
@@ -1033,37 +1031,6 @@ CursorFreeWindow (pointer data, XID id)
return 1;
}
-static CursorPtr
-createInvisibleCursor (void)
-{
- CursorPtr pCursor;
- unsigned char *psrcbits, *pmaskbits;
- CursorMetricRec cm;
-
- psrcbits = (unsigned char *) calloc(4, 1);
- pmaskbits = (unsigned char *) calloc(4, 1);
- if (psrcbits == NULL || pmaskbits == NULL) {
- return NULL;
- }
-
- cm.width = 1;
- cm.height = 1;
- cm.xhot = 0;
- cm.yhot = 0;
-
- if (AllocARGBCursor(psrcbits, pmaskbits,
- NULL, &cm,
- 0, 0, 0,
- 0, 0, 0,
- &pCursor, serverClient, (XID)0) != Success)
- return NullCursor;
-
- if (!AddResource(FakeClientID(0), RT_CURSOR, (pointer) pCursor))
- return NullCursor;
-
- return pCursor;
-}
-
Bool
XFixesCursorInit (void)
{
@@ -1092,10 +1059,6 @@ XFixesCursorInit (void)
CursorWindowType = CreateNewResourceType(CursorFreeWindow,
"XFixesCursorWindow");
- pInvisibleCursor = createInvisibleCursor();
- if (pInvisibleCursor == NULL)
- return BadAlloc;
-
return CursorClientType && CursorHideCountType && CursorWindowType;
}
diff --git a/xorg-server/xorg-server.pc.in b/xorg-server/xorg-server.pc.in
index 376cb933d..e1a7e1ea3 100644
--- a/xorg-server/xorg-server.pc.in
+++ b/xorg-server/xorg-server.pc.in
@@ -1,20 +1,20 @@
-prefix=@prefix@
-exec_prefix=@exec_prefix@
-libdir=@libdir@
-includedir=@includedir@
-datarootdir=@datarootdir@
-moduledir=@moduledir@
-sdkdir=@sdkdir@
-sysconfigdir=@sysconfigdir@
-
-abi_ansic=@abi_ansic@
-abi_videodrv=@abi_videodrv@
-abi_xinput=@abi_xinput@
-abi_extension=@abi_extension@
-
-Name: xorg-server
-Description: Modular X.Org X Server
-Version: @PACKAGE_VERSION@
-Requires: pixman-1 pciaccess
-Cflags: -I${sdkdir} @symbol_visibility@
-Libs: -L${libdir}
+prefix=@prefix@
+exec_prefix=@exec_prefix@
+libdir=@libdir@
+includedir=@includedir@
+datarootdir=@datarootdir@
+moduledir=@moduledir@
+sdkdir=@sdkdir@
+sysconfigdir=@sysconfigdir@
+
+abi_ansic=@abi_ansic@
+abi_videodrv=@abi_videodrv@
+abi_xinput=@abi_xinput@
+abi_extension=@abi_extension@
+
+Name: xorg-server
+Description: Modular X.Org X Server
+Version: @PACKAGE_VERSION@
+Requires: pixman-1 pciaccess xproto >= 7.0.17
+Cflags: -I${sdkdir} @symbol_visibility@
+Libs: -L${libdir}