diff options
Diffstat (limited to 'X11/extensions/XI2proto.txt')
| -rw-r--r-- | X11/extensions/XI2proto.txt | 1605 |
1 files changed, 1605 insertions, 0 deletions
diff --git a/X11/extensions/XI2proto.txt b/X11/extensions/XI2proto.txt new file mode 100644 index 000000000..7c41debc8 --- /dev/null +++ b/X11/extensions/XI2proto.txt @@ -0,0 +1,1605 @@ + + The X Input Extension + Version 2.0 + + Peter Hutterer + peter.hutterer@redhat.com + Red Hat, Inc. + + + +1. Introduction + +The X Input Extension version 2.0 (XI2) is the second major release of the X +Input Extension. + +XI2 provides a number of enhancements over version 1.5, including: +- use of XGE and GenericEvents. GenericEvents are of flexible length with a + minimum length of 32 bytes. +- explicit device hierarchy of master and slave devices. See Section 4. +- use of multiple independent master devices (Multi-Poiner X or MPX). +- the ability for devices to change capabilities at runtime. +- raw device events + +XI2's intent is to replace both core input processing and prior versions of +the X Input Extension. Historically, the majority of applications employed the +core protocol requests and events to handle user input. The core protocol does +not provide information about which device generated the event. The X Input +Extension version up to 1.5 requires the differentiation between core and +extended devices. Extended devices may not be core devices and thus cannot be +used on applications employing the core protocol. XI2 addresses both of these +issues by enabling devices to be both extended and core devices and providing +device information in each event (with the exception of core events). + + ❧❧❧❧❧❧❧❧❧❧❧ + +2. Notations used in this document + +Notation for requests: +┌─── + Name of request + name of request field: type of request field + name of request field: type of request field + ▶ + name of reply field: type of reply field +└─── + +Notation for events: +┌─── + Name of event + name of field: type of field + name of field: type of field +└─── + +Complex fields are specified in the following notation: + name of field: COMPLEXFIELDTYPE +or, if multiple of these fields exist: + name of field: LISTofCOMPLEXFIELDTYPE + +COMPLEXFIELDTYPE: { name of subfield: type of subfield, + name of subfield: type of subfield } + + ❧❧❧❧❧❧❧❧❧❧❧ + +3. Interoperability between version 1.x and 2.0 + +FIXME + + ❧❧❧❧❧❧❧❧❧❧❧ + +4. The Master/Slave device hierarchy + +XI2 introduces a device hierarchy split up into so-called Master Devices (MD) +and Slave Devices (SD). + +4.1 Master devices +An MD is a virtual device created and managed by the server. MDs may send core +events and XI events. However, an MD does not represent a physical device and +relies on SDs for event generation. MDs come in two forms: as master pointers +or as master keyboards. A master pointer is represented by a visible cursor on +the screen. A master keyboard is represented by a keyboard focus. + +Each master pointer is paired with the respective master keyboard and vice +versa, and this pairing is constant for the lifetime of both input devices. +Clients can use this pairing behaviour to implement input paradigms that +require pointer and keyboard interation (e.g. SHIFT + Click). + +4.2 Slave devices +An SD is usually a physical device configured in the server. SDs are not +represented by a cursor or keyboard focus and may be attached to a master +pointer or master keyboard. SDs can only be attached to any master of the same +type (e.g. a physical pointer device can be attached to any master pointer). + +If an event is generated by an SD +- if the SD is attached to a master pointer, it changes the position and/or + button state of the master pointer. +- if the SD is attached to a master keyboard, it sends events to this + keyboard's focus window (if applicable) and/or changes the modifier state of + this keyboard. +- if the SD is not attached to an MD ("floating"), it does not change + any master device. The SD has its own (invisible) sprite and its own focus. + Both the sprite and the focus must be managed explicitly by the client + program. + +4.3 Event processing for attached slave devices + +Whenever an SD changes its logical state, +- the event is delivered as an XI event to any interested clients. If the + device is floating, event processing stops. + Otherwise, if the device is attached, +- the master device changes its classes to reflect the SD's capabilities. All + interested clients are notified of this device change. +- then, the event is delivered as an XI event from the MD to any interested + clients. If the event has been delivered, event processing stops. + Otherwise, +- the event is delivered as a core event to any interested clients. + +Given that W is the event window, and P the parent window of W, event delivery +to P is only attempted if neither the XI event, nor the core event has been +delivered on W. Once an event has been delivered as either XI or core event, +event processing stops. + + ❧❧❧❧❧❧❧❧❧❧❧ +5. Data types + +BUTTONMASK + A binary mask defined as (1 << button number). + A SETofBUTTONMASK is a binary OR of zero or more BUTTONMASK. + +DEVICE { DEVICEID, AllDevices, AllMasterDevices } + A DEVICE specifies either a DEVICEID or AllDevices or + AllMasterDevices. + +DEVICEID { CARD16 } + A DEVICEID is a numerical ID for a device currently available in the + server. The server may re-use a device ID after a device's removal. + The device IDs 0 and 1 are reserved. + AllDevices ........ 0 + AllMasterDevices .. 1 + +DEVICEUSE { MasterPointer, MasterKeyboard, SlavePointer, + SlaveKeyboard, FloatingSlave } + A DEVICEUSE field specifies the current use of a device in the MD/SD + device hierarchy. See Section 4 for more information. + +EVENTMASK + An EVENTMASK is a binary mask defined as (1 << event type). + A SETofEVENTMASK is a binary OR of zero or more EVENTMASK. + +FP1616 + Fixed point decimal in 16.16 format as one INT16 and one CARD16. + The INT16 contains the integral part, the CARD32 the decimal fraction + shifted by 16. + +FP3232 + Fixed point decimal in 32.32 format as one INT32 and one CARD32. + The INT32 contains the integral part, the CARD32 the decimal fraction + shifted by 32. + +VALUATORMASK + A binary mask defined as (1 << valuator number). + A SETofVALUATORMASK is a binary OR of zero or more VALUATORMASK. + + ❧❧❧❧❧❧❧❧❧❧❧ +6. Errors + +Errors are sent using core X error reports. + +Device + A value for a DEVICE argument does not specify a valid DEVICE. + + ❧❧❧❧❧❧❧❧❧❧❧ +7. Requests: + +The server does not guarantee that the length of a reply remains constant in +future revisions of XI2. A client must always retrieve the exact length of the +protocol reply from the connection, even if the reply is longer than defined +for the XI2 version supported by the client. +Additional bytes in a request may include data supported in later versions of +XI2. Clients should ignore this data. + +7.1 Requests introduced in version 2.0 + + ┌─── + XIQueryVersion + major_version: CARD16 + minor_version: CARD16 + ▶ + major_version: CARD16 + minor_version: CARD16 + └─── + + The client sends the highest supported version to the server and the + server sends the highest version it supports, but no higher than the + requested version. Major versions changes can introduce incompatibilities + in existing functionality, minor version changes introduce only backward + compatible changes. It is the clients responsibility to ensure that the + server supports a version which is compatible with its expectations. + + major_version + Major XI2 version. + minor_version + Minor XI2 version. + + If major_version is less than 2, a BadValue error occurs. + + ┌─── + XIQueryDevice + DEVICE deviceid + ▶ + num_devices: CARD16 + deviceinfo: LISTofDEVICEINFO + └─── + + DEVICEINFO { deviceid: DEVICEID + use: DEVICEUSE + attachment: DEVICEID + enabled: BOOL + num_classes: CARD16 + name_len: CARD16 + name: LISTofCHAR8 + classes: LISTofCLASS } + + CLASS { BUTTONCLASS KEYCLASS, AXISCLASS } + + BUTTONCLASS { type: ButtonClass + length: CARD16 + sourceid: CARD16 + buttons_len: CARD16 + state: SETofBUTTONMASK + labels: LISTofATOM } + + KEYCLASS { type: KeyClass + length: CARD16 + sourceid: CARD16 + num_keys: CARD16 + keys: LISTofCARD32 } + + AXISCLASS { type: AxisClass + length: CARD16 + sourceid: CARD16 + axisnumber: CARD16 + label: ATOM + min: FP3232 + max: FP3232 + value: FP3232 + resolution: CARD32 } + + XIQueryDevices details information about the requested input devices. + + devices + The device to list. If 'devices' is AllDevices, all enabled and + disabled devices are listed. If 'devices' is AllMasterDevices, all + enabled and disabled master devices are listed. If 'devices' is a + valid DEVICE, only this DEVICE is listed and 'num_devices' is 1. + num_devices + The number of 'deviceinfos' returned. + + Each 'deviceinfo' is detailed as follows: + deviceid + The unique ID of the device. Device IDs may get re-used when a device + is removed. + use + If the device is a master pointer, 'use' is MasterPointer. + If the device is a master keyboard, 'use' is MasterKeyboard. + If the device is a slave pointer, 'use' is SlavePointer. + If the device is a slave keyboard, 'use' is SlaveKeyboard. + If the device is a floating slave, 'use' is FloatingSlave. + + attachment + If the device is a master pointer or a master keyboard, 'attachment' + specifies the paired master keyboard, or the paired master pointer, + respectively. If the device is a non-floating slave device + 'attachment' specifies the master device this device is attached to. + If the device is a floating slave, 'attachment' is undefined. + + enabled + Zero if the device is disabled, non-zero otherwise. + num_classes + Number of 'classes' provided. + name_len + Length of the name in bytes. + classes + Details the available classes provided by the device in an undefined + order. + name + The device's name, padded to a multiple of 4 bytes. + + For all classes, 'type' specifies the device class. Clients are required + to ignore unknown device classes. The 'length' field specifies the length + of the class in 4 byte units. + The following classes may occur only once: ButtonClass, KeyClass + + ButtonClass: + type + Always ButtonClass. + length + Length in 4 byte units. + sourceid + The device this class originates from. + num_buttons + Number of buttons provided by the device. + labels + List of Atoms specifying the label for each button. An atom of None + specifies an unlabeled button. Buttons are listed in the device-native + order and potential button mappings are ignored. + state + The current button mask for this device. Each bit representing a + button is 1 if this button is logically down, or 0 otherwise. State a + multiple of 4-byte units and always contains at least num_buttons + bits. + + KeyClass: + type + Always KeyClass. + length + Length in 4 byte units. + sourceid + The device this class originates from. + num_keys + Number of keycodes provided by the device. + keys + List of keycodes provided. + + AxisClass: + type + Always AxisClass. + length + Length in 4 byte units. + sourceid + The device this class originates from. + axisnumber + Axis number of this axis. The axis number is in device-native + order and potential axis mappings are ignored. + label + Atom specifying the axis name. An Atom of None specifies an unlabeled + axis. + min + Minimum value. + max + Minimum value. + resolution + Resolution in counts/meter. + mode + Relative or Absolute. + value + Last published axis value (if mode is absolute). + + An axis in Relative mode may specify 'min' and 'max' as a hint to the + client. If no 'min' and 'max' information is available, both must be 0. + + ┌─── + XISelectEvents + window: Window + num_masks: CARD16 + masks: LISTofEVENTMASK + + └─── + + EVENTMASK { deviceid: DEVICE, + mask_len: CARD16, + mask: SETofEVENTMASK + + window + The window to select the events on. + num_masks + Number of items in mask. + deviceid + Numerical deviceid, or AllDevices, or AllMasterDevices. + mask_len + Length of mask in 4 byte units. + mask + Event mask. An event mask for an event type T is defined as (1 << T). + + XISelectEvents selects for XI2 events on 'window'. + + If 'num_masks' is 0, a BadValue error occurs. + + Each 'mask' sets the (and overwrites a previous) event mask for the DEVICE + specified through 'deviceid'. The device 'AllDevices' or + 'AllMasterDevices' is treated as a separate device by server. A client's + event mask is the union of 'AllDevices', 'AllMasterDevices' and the + per-device event mask. + The removal of device from the server unsets the event masks for the + device. If an event mask is set for AllDevices or AllMasterDevices, the + event mask is not cleared on device removal and affects all future + devices. + + If 'mask_len' is 0, the event mask for the given device is cleared. + + The mask for XIHierarchyEvents may only be selected for XIAllDevices. + Setting it for any other device results in a BadValue error. + + ┌─── + XIGetSelectedEvents + window: Window + ▶ + num_masks: CARD16 + masks: LISTofEVENTMASK + └─── + + + window + The window to select the events on. + num_masks + Number of items in mask. + masks + Selected event masks by this client. + + Masks are returned on a per-device basis, with masks for 'AllDevices' and + 'AllMasterDevices' returned separately. + + If 'num_masks' is 0, no events have been selected by this client on the + given window. + + ┌─── + XIQueryPointer + window: Window + deviceid: DEVICEID + ▶ + root: Window + child: Window + root_x: FP1616 + root_y: FP1616 + win_x: FP1616 + win_y: FP1616 + same_screen: BOOL + mods: MODIFIERINFO + group: GROUPINFO + buttons_len: CARD16 + buttons: SETofBUTTONMASK + └─── + + Query a master pointer device for its current position. + + root + The root window the pointer is logically on. + child + The child window of 'window' that contains the pointer or None. + root_x + root_y + Pointer position relative to the root window's origin. + win_x + win_y + Pointer position relative to 'window' or 0 if 'same_screen' is false. + same_screen + TRUE if 'window' is on the same screen as the pointer. + mods + XKB modifier state on the paired device. + group + XKB group state on the paired device. + buttons_len + The length of 'buttons' in 4 byte units. + buttons + Button state. + + ┌─── + XIWarpPointer + src_win: Window + dst_win: Window + src_x: FP1616 + src_y: FP1616 + src_width: INT16 + src_height: INT16 + dst_x: FP1616 + dst_y: FP1616 + deviceid: DEVICEID + └─── + + WarpPointer moves the pointer of 'deviceid' as if the user had moved + the pointer. WarpPointer can only be called for MasterPointer and + FloatingSlave devices. + + src_win + If src_window is not None, the move only takes place if src_window + contains the pointer and the pointer is contained in the specified + rectangle of src_window. + dst_win + If dst_win is None, this request moves the pointer by offsets + 'dst_x'/'dst_y' relative to the current position of the pointer. If + dst_window is a window, this request moves the pointer to + 'dst_x'/'dst_y' relative to dst_win's origin. + src_x + src_y + src_width + src_height + Specifies the source window rectangle. + dst_x + dst_y + The relative coordinates to move the pointer if 'dst_win' is None, or + the absolute coordinates if 'dst_win' is a window. + deviceid + The device to warp. + + This request cannot be used to move the pointer outside the confine-to + window of an active pointer grab. An attempt will only move the pointer as + far as the closest edge of the confine-to window. + + This request will generate events just as if the user had instantaneously + moved the pointer. + + ┌─── + XIChangeCursor + win: Window + cursor: Cursor + deviceid: DEVICEID + └─── + + Change a master pointer's cursor on the specified window. + + window + The window. + cursor + The new cursor or None. + deviceid + The master pointer device. + + Whenever 'device' enters a window W, the cursor shape is selected in the + following order: + - if the current window has a device cursor C(d) defined for 'device', + display this cursor C(d). + - otherwise, if the current window has a cursor C(w) defined in the core + protocol's window attributes, display cursor C(w). + - repeat on parent window until a cursor has been found. + + ┌─── + XIChangeHierarchy + num_changes: CARD8 + changes: LISTofHIERARCHYCHANGES + └─── + + HIERARCHYCHANGE { ADDMASTER, REMOVEMASTER, ATTACHSLAVE, DETACHSLAVE } + + HIERARCHYCHANGETYPE { AddMaster, RemoveMaster, AttachSlave, DetachSlave } + + CHANGEMODE { Float, Attach } + + ADDMASTER { type: HIERARCHYCHANGETYPE + length: CARD16 + name_len: CARD16 + send_core: BOOL + enable: BOOL + name: LISTofCHAR8 } + + REMOVEMASTER { type: HIERARCHYCHANGETYPE + length: CARD16 + deviceid: DEVICEID + return_mode: CHANGEMODE + return_pointer: DEVICEID + return_keyboard: DEVICEID } + + ATTACHSLAVE { type: HIERARCHYCHANGETYPE + length: CARD16 + deviceid: DEVICEID + master: DEVICEID } + + DETACHSLAVE { type: HIERARCHYCHANGETYPE + length: CARD16 + deviceid: DEVICEID } + + XIChangeHierarchy allows a client to modify the MD/SD device + hierarchy (see Section 4). + + num_changes + The number of changes to apply to the current hierarchy. + changes + The list of changes. + + The server processes the changes one by one and applies changes + immediately. If an error occurs, processing stops at the current change + and returns the number of successfully applied changes in the error. + + ADDMASTER creates a pair of master devices. + type + Always AddMaster. + length + Length in 4 byte units. + name_len + Length of 'name' in bytes. + send_core + TRUE if the device should send core events. + enable + TRUE if the device is to be enabled immediately. + name + The name for the new master devices. The master pointer's name is + automatically appended with " pointer", the master keyboard's name is + automatically appended with " keyboard". + + REMOVEMASTER removes an existing master device. + type + Always RemoveMaster. + length + Length in 4 byte units. + deviceid + The device to remove. + return_mode + Return mode for attached slave devices. + If 'return_mode' is Float, all slave devices are set to floating. + If 'return_mode' is Attach, slave pointers are attached to + 'return_pointer' and slave keyboards are attached to + 'return_keyboard'. + return_pointer + return_keyboard + The master pointer and master keyboard to attach slave devices to, if + 'return_mode' is Attach. + + Removing a master pointer removes the paired master keyboard and vice + versa. + + ATTACHSLAVE attaches a slave device to a given master device. + type + Always ChangeAttachment. + length + Length in 4 byte units. + deviceid + Deviceid of the slave device. + master + The new master device to attach this slave device to. + + DETACHSLAVE detaches a slave device from its current master device. + type + Always ChangeAttachment. + length + Length in 4 byte units. + deviceid + Deviceid of the slave device. + + ┌─── + XISetClientPointer + win: Window + deviceid: DEVICEID + └─── + + Set the ClientPointer for the client owning 'win' to the given device. + + win + Window or client ID. + deviceid + The master pointer or master keyboard that acts as ClientPointer. + + Some protocol requests are ambiguous and the server has to choose a device + to provide data for a request or a reply. By default, the server will + choose a client's ClientPointer device to provide the data, unless the + client currently has a grab on another device. + + If win is None, the ClientPointer for this client is set to the given + device. Otherwise, if win is a valid window, the ClientPointer for the + client owning this window is set to the given device. Otherwise, if win is + not a valid window but a client with the client mask equal to win exists, + this client's ClientPointer is set to the given device. + + If deviceid does not specify a master pointer or master keyboard, a + BadDevice error returned. + + If window does not specify a valid window or client ID and is not None, a + BadWindow error is returned. + + ┌─── + XIGetClientPointer + win: Window + ▶ + set: BOOL + deviceid: DEVICEID + └─── + + Query the ClientPointer for the client owning 'win'. + + win + The window or client ID. + set + TRUE if the client has an explicitly set ClientPointer. + deviceid + The master pointer that acts as a ClientPointer if 'set' is TRUE. + + ┌─── + XISetFocus + focus: Window + deviceid: DEVICEID + time: Time + └─── + + Set the focus for the given device to the given window. Future key events + from this device are sent to this window. + This request generates FocusIn and FocusOut events. + + focus + A viewable window or None. + deviceid + The device to modify the focus window for. + time + Specifies the time to change the focus or CurrentTime. + + If focus is None, key events from this device are discarded until a new + focus window is set. If focus is a viewable window, key events from this + device are sent to this window. If the window becomes unviewable, the + window's first viewable ancestor automatically becomes the focus window + and FocusIn and FocusOut events are sent as if a client had changed the + focus window. + This is equivalent to RevertToParent in the core XSetInputFocus window. + + This request has no effect if the specified time is earlier than the + current last-focus-change time or is later than the current X server time. + Otherwise, the last-focus-change time is set to the specified time. + + ┌─── + XIGetFocus + deviceid: DEVICEID + ▶ + focus: Window + └─── + + Return the current focus window for the given device. + + ┌─── + XIGrabDevice + deviceid: DEVICEID + grab_window: Window + owner_events: BOOL + grab_mode: { Synchronous, Asynchronous } + paired_device_mode: { Synchronous, Asynchronous } + time: TIMESTAMP or CurrentTime + cursor: Cursor + mask_len: CARD16 + masks: SETofEVENTMASK + ▶ + status: Success, AlreadyGrabbed, Frozen, InvalidTime, NotViewable + └─── + + This request actively grabs control of the specified input device. Further + input events from this device are reported only to the grabbing client. + This request overides any previous active grab by this client for this + device. + + deviceid + The device to grab. + grab_window + Events are reported relative to the grab window. + owner_events + Specifies whether event will be reported normally or relative to the + grab window. + grab_mode + Specifies if this device will be frozen as a result of the grab. + paired_device_mode + Specifies if the master device paired with this device will be frozen + as a result of the grab. + time + A valid server time or CurrentTime. + cursor + The cursor to display for the duration of the grab or None. + mask_len + Length of mask in 4 byte units. + mask + Event mask. An event mask for an event type T is defined as (1 << T). + status + Success or the reason why the grab could not be established. + + + The masks parameter specifies which events the client wishes to receive + while the device is grabbed. + + If owner-events is False, input events generated from this device are + reported with respect to grab-window, and are only reported if selected by + being included in the event-list. If owner-events is True, then if a + generated event would normally be reported to this client, it is reported + normally, otherwise the event is reported with respect to the grab-window, + and is only reported if selected by being included in the event-list. For + either value of owner-events, unreported events are discarded. + + If grab-mode is Asynchronous, device event processing continues normally. + If the device is currently frozen by this client, then processing of + device events is resumed. If grab-mode is Synchronous, the state of the + grabbed device (as seen by means of the protocol) appears to freeze, + and no further device events are generated by the server until the + grabbing client issues a releasing XIAllowEvents request or until the + device grab is released. Actual device input events are not lost while the + device is frozen; they are simply queued for later processing. + + If the device is a slave device, the paired-device-mode is ignored. + Otherwise, if this device is a master device and paired-device-mode is + Asynchronous, event processing is unaffected by activation of the grab. If + this device is a master device and paired-device-mode is Synchronous, the + state of the master device paired with this device (as seen by means of the + protocol) appears to freeze, and no further events are generated by the + server until the grabbing client issues a releasing XIAllowEvents request + or until the device grab is released. Actual events are not lost while the + devices are frozen; they are simply queued for later processing. + + If the cursor is not None and the device is a master pointer device, the + cursor will be displayed until the device is ungrabbed. + + This request fails and returns: + AlreadyGrabbed: If the device is actively grabbed by some other client. + NotViewable: If grab-window is not viewable. + InvalidTime: If the specified time is earlier than the last-grab-time for + the specified device or later than the current X server time. + Otherwise, the last-grab-time for the specified device is set + to the specified time and CurrentTime is replaced by the + current X server time. + Frozen: If the device is frozen by an active grab of another client. + + To release a grab of a device, use XIUngrabDevice. + + ┌─── + XIUngrabDevice + deviceid: DEVICEID + time: TIMESTAMP or CurrentTime + └─── + + This request releases the device if this client has it actively grabbed + (from either XIGrabDevice, XIGrabDeviceKey or XIGrabDeviceButton) and + releases any queued events. If any devices were frozen by the grab, + XIUngrabDevice thaws them. + + deviceid + The device to grab. + time + A valid server time or CurrentTime. + + The request has no effect if the specified time is earlier + than the last-device-grab time or is later than the current server time. + This request generates FocusIn and FocusOut events. + An XIUngrabDevice is performed automatically if the event window for an + active device grab becomes not viewable. + + ┌─── + XIAllowEvents: + deviceid: DEVICEID + time: TIMESTAMP or CurrentTime + event_mode: { AsyncDevice, SyncDevice, + AsyncPairedDevice, SyncPairedDevice, + ReplayDevice, AsyncPair, SyncPair } + └─── + + The XIAllowEvents request releases some queued events if the client + has caused a device to freeze. + + deviceid + The device to grab. + time + A valid server time or CurrentTime. + event_mode + Specifies whether a device is to be thawed and events are to be + replayed. + + The request has no effect if the specified time is earlier than the + last-grab time of the most recent active grab for the client, or if the + specified time is later than the current X server time. + + The following describes the processing that occurs depending on what constant + you pass to the event-mode argument: + AsyncDevice: + If the specified device is frozen by the client, event processing for that + device continues as usual. If the device is frozen multiple times by the + client on behalf of multiple separate grabs, AsyncDevice thaws for + all. + AsyncDevice has no effect if the specified device is not frozen by the + client, but the device need not be grabbed by the client. + SyncDevice: + If the specified device is frozen and actively grabbed by the client, + event processing for that device continues normally until the next + event is reported to the client. At this time, the specified device + again appears to freeze. However, if the reported event causes the + grab to be released, the specified device does not freeze. + SyncDevice has no effect if the specified device is not frozen by the + client or is not grabbed by the client. + ReplayDevice: + If the specified device is actively grabbed by the client and is frozen + as the result of an event having been sent to the client (either from + the activation of a XIGrabButton or from a previous XIAllowEvents with + mode SyncDevice, but not from a Grab), the grab is released and + that event is completely reprocessed. This time, however, the request + ignores any passive grabs at or above (towards the root) the + grab-window of the grab just released. + The request has no effect if the specified device is not grabbed by + the client or if it is not frozen as the result of an event. + AsyncPairedDevice + If the paired master device is frozen by the client, event processing + for it continues as usual. If the paired device is frozen multiple + times by the client on behalf of multiple separate grabs, + AsyncPairedDevice thaws for all. + AsyncPairedDevice has no effect if the device is not frozen by the + client, but those devices need not be grabbed by the client. + AsyncPairedDevice has no effect if deviceid specifies a slave device. + SyncPairedDevice + If the paired master device is frozen by the client, event processing (for + the paired master device) continues normally until the next button or key + event is reported to the client for the grabbed device (button event for + the grabbed device, key or motion event for the device), at which time + the device again appears to freeze. However, if the reported event causes + the grab to be released, then the device does not freeze. + SyncPairedDevice has no effect if the specified device is not grabbed + by the client or if it is no frozen as the result of an event. + SyncPairedDevice has no effect if deviceid specifies a slave device. + SyncPair + If both the device and the paired master device are frozen by the + client, event processing (for both devices) continues normally until + the next XIButtonPress, XIButtonRelease, XIKeyPress, or XIKeyRelease + event is reported to the client for a grabbed device (button event for + a pointer, key event for a keyboard), at which time the devices again + appear to freeze. However, if the reported event causes the grab to be + released, then the devices do not freeze (but if the other device is + still grabbed, then a subsequent event for it will still cause both + devices to freeze). + SyncPair has no effect unless both the device and the paired master + device are frozen by the client. If the device or paired master device + is frozen twice by the client on behalf of two separate grabs, + SyncPair thaws for both (but a subsequent freeze for SyncPair will + only freeze each device once). + SyncPair has no effect if deviceid specifies a slave device. + AsyncPair + If the device and the paired master device are frozen by the client, + event processing for both devices continues normally. If a device is + frozen twice by the client on behalf of two separate grabs, AsyncBoth + thaws for both. AsyncPair has no effect unless both the device and the + paired master device frozen by the client. + AsyncPair has no effect if deviceid specifies a slave device. + + ┌─── + XIPassiveGrabDevice + deviceid: DEVICEID + detail: CARD32 + grab_type: GRABTYPE + grab_window: Window + cursor: Cursor + owner_events: Bool + grab_mode: { Synchronous, Asynchronous } + paired_device_mode: { Synchronous, Asynchronous } + num_modifiers: INT16 + mask_len: CARD16 + masks: SETofEVENTMASK + modifiers: CARD32 or GrabAnyModifier + ▶ + num_modifiers_return: INT16 + modifiers_return: GRABMODIFIERINFO + └─── + + GRABTYPE { GrabtypeButton, GrabtypeKeycode, GrabtypeEnter, + GrabTypeFocusIn} + + GRABMODIFIERINFO { status: Access + modifiers: CARD32 } + + Establish an explicit passive grab for a button or keycode + on the specified input device. + + cursor + The cursor to display for the duration of the grab. If grab_type + is not GrabtypeButton, this argument is ignored. + deviceid + The device to establish the passive grab on. + detail + The button number, or key symbol to grab for. + Must be 0 for GrabtypeEnter and GrabtypeFocusIn. + grab_type + The type of grab to establish. + grab_window + Events are reported relative to the grab window. + grab_mode + If grab-mode is Asynchronous, device event processing continues + normally. If the device is currently frozen by this client, then + processing of device events is resumed. If grab-mode is + Synchronous, the state of the grabbed device (as seen by means of + the protocol) appears to freeze, and no further device events are + generated by the server until the grabbing client issues a + releasing XIAllowEvents request or until the device grab is + released. Actual device input events are not lost while the device + is frozen; they are simply queued for later processing. + mask_len + Length of mask in 4 byte units. + mask + Event mask. An event mask for an event type T is defined as (1 << T). + modifiers + XKB modifier state to activate this passive grab. + num_modifiers + Number of elements in modifiers. + owner_events + Specifies whether event will be reported normally or relative to the + grab window. + num_modifiers_return + Number of elements in modifiers_return + modifiers_return + XKB modifier state that could not be grabbed. + + If owner-events is False, input events generated from this device are + reported with respect to grab-window, and are only reported if + selected by being included in the event-list. If owner-events is + True, then if a generated event would normally be reported to this + client, it is reported normally, otherwise the event is reported + with respect to the grab-window, and is only reported if selected + by being included in the event-list. For either value of + owner-events, unreported events are discarded. + + If deviceid specifies a master pointer, the modifiers of the paired + master keyboard are used. If deviceid specifies a slave pointer + the modifiers of the master keyboard paired with the attached master + pointers are used. If deviceid specifies a slave keyboard, the + modifiers of the attached master keyboard are used. Note that + activating a grab on a slave device detaches the device from its + master. In this case, the modifiers after activation of the grab are + from the slave device only and may be different to the modifier state + when the grab was triggered. + + In the future, if grab_type is GrabtypeButton or GrabtypeKeyboard, the + device is actively grabbed if: + - the device is not grabbed, and + - the specified modifier keys are down, and + - the grab_type is GrabtypeButton and the button specified in detail + is logically pressed or the grab_type is GrabtypeKeycode and the + keycode specified in detail is logically pressed, and + - the grab_window contains the pointer, and + - a passive grab on the same button/keycode + modifier + combination does not exist on an ancestor of grab_window. + + Otherwise, if grab_type is GrabtypeEnter or GrabtypeFocusIn, the + device is actively grabbed if: + - the device is not actively grabbed, and + - the specified modifier keys are down, and + - the grab_type is GrabtypeEnter and the device's pointer has moved + into grab_window or a descendant of grab_window, or the grab_type is + GrabtypeFocusIn and the device's focus has been set to the + grab_window or a descendant of grab_window, + - a passive grab of the same grab_type + modifier combination does not + does not exist on an ancestor of grab_window. + + A modifier of GrabAnyModifier is equivalent to issuing the request for + all possible modifier combinations (including no modifiers). A client + may request a grab for GrabAnyModifier and explicit modifier + combinations in the same request. + + A GrabtypeButton or GrabtypeKeyboard grab is released when all buttons + or keycode are released, independent of the state of modifier keys. + A GrabtypeEnter or GrabtypeFocusIn grab is released when the + pointer or focus leaves the window and all of its descendants, + independent of the state of modifier keys. + Note that the logical state of a device (as seen by means of the + protocol) may lag the physical state if device event processing is + frozen. + + This request overrides all previous passive grabs by the same + client on the same button/key/enter/focus in + modifier combinations + on the same window. + + If some other client already has issued a XIPassiveGrabDevice request + with the same button or keycode and modifier combination, the + failed modifier combinations is returned in modifiers_return. If some + other client already has issued an XIPassiveGrabDevice request of + grab_type XIGrabtypeEnter or XIGrabtypeFocusIn with the same + grab_window and the same modifier combination, the failed modifier + combinations are returned in modifiers_return. If num_modifiers_return + is zero, all passive grabs have been successful. + + If a button grab or enter grab activates, EnterNotify and LeaveNotify + events with mode Grab are generated as if the pointer were to suddenly + warp from its current position some position in the grab_window. + However, the pointer does not warp, and the pointer position is used + as both the initial and final positions for the events. + + If a keycode grab or focus grab activates, FocusIn and FocusOut events + with mode Grab are generated as if the focus were to change from the + current window to the grab_window. + + If an enter or focus in grab activates, additional EnterNotify events + with mode XIPassiveGrabNotify are generated as if the pointer or focus + were to suddenly warp from its current position to some position in + the grab window. These events are sent to the grabbing client only + and only if the grab event mask has selected for it. If such a passive + grab deactivates, addional LeaveNotify events with mode + XIPassiveUngrabNotify are generated and sent to the grabbing client + before the grab deactivates. + + ┌─── + XIPassiveUngrabDevice + deviceid: DEVICEID + detail: CARD32 + grab_type: GRABTYPE + grab_window: Window + num_modifiers: INT16 + modifiers: MODIFIERINFO + └─── + + Release an explicit passive grab on the specified input device. + + deviceid + The device to establish the passive grab on. + detail + The button number or key symbol to ungrab. + Must be 0 for GrabtypeEnter and GrabtypeFocusIn. + grab_type + The type of grab to establish. + grab_window + Events are reported relative to the grab window. + modifiers + XKB modifier state to activate this passive grab. + num_modifiers + Number of elements in modifiers. + + This request has no effect if the client does not have a passive grab + of the same type, same button or keycode (if applicable) and modifier + combination on the grab_window. + + ┌─── + XIListProperties + deviceid: DEVICEID + ▶ + num_properties: INT16 + properties: LISTofATOM + └─── + + List the properties associated with the given device. + + deviceid + The device to list the properties for. + num_atoms + Number of atoms in the reply + atoms + All properties on the device. + + ┌─── + XIChangeProperty + deviceid: DEVICEID + property: ATOM + type: ATOM + format: { 8, 16, 32 } + mode: { Append, Prepend, Replace } + num_items: CARD32 + data: LISTofINT8, or LISTofINT16, or LISTofINT32 + └─── + + Change the given property on the given device. + + deviceid + The device to change the property on. + property + The property to modify. + type + The property's type. + mode + One of Append, Prepend, or Replace + num_items + Number of items following this request. + data + Property data (nitems * format/8 bytes) + + The type is uninterpreted by the server. The format specifies whether + the data should be viewed as a list of 8-bit, 16-bit, or 32-bit + quantities so that the server can correctly byte-swap as necessary. + + If the mode is Replace, the previous propert y value is discarded. If + the mode is Prepend or Append, then the type and format must match the + existing property value (or a Match error results). If the property is + undefined, it is treated as defined with the correct type and format + with zero-length data. For Prepend, the data is tacked on to the + beginning of the existing data, and for Append, it is tacked on to the + end of the existing data. + + The lifetime of a property is not tied to the storing client. Properties + remain until explicitly deleted, until the device is removed, or + until server reset. + + A property cannot be deleted by setting nitems to zero. To delete a + property, use XIDeleteDeviceProperty. + + This request generates an XIPropertyEvent. + + ┌─── + XIDeleteProperty + deviceid: DEVICEID + property: ATOM + └─── + + Deletes the given property on the given device. + + deviceid + The device to delete the property on. + property + The property to delete. + + If the property is deleted, an XIPropertyEvent is generated on the device. + If the property does not exist, this request does nothing. + + ┌─── + XIGetProperty + deviceid: DEVICEID + property: ATOM + type: Atom or AnyPropertyType + offset: CARD32 + len: CARD32 + delete: BOOL + ▶ + type: Atom + bytes_after: CARD32 + num_items: CARD32 + format: { 8, 16, 32 } + data: LISTofINT8, or LISTofINT16, or LISTofINT32 + └─── + + Get the data for the given property on the given device. + + deviceid + The device to retrieve the property data from. + property + The property to retrieve the data from.. + type + The property type to retrieve or AnyPropertyType + offset + The offset in 4-byte units. + len + Number of bytes to receive in 4-byte units. + delete + Delete the property after retrieving the data. + bytes_after + Number of unread bytes in the stored property + num_items + Number of items in data + format + 8, 16, or 32 + data + Property data (nitems * format/8 bytes) + + If the specified property does not exist for the specified device, then + the return type is None, the format and bytes-after are zero, and the value is + empty. The delete argument is ignored in this case. If the specified property + exists but its type does not match the specified type, then the return + type is the actual type of the property, the format is the actual format of the + property (never zero), the bytes-after is the length of the property in bytes + (even if the format is 16 or 32), and the value is empty. The delete + argument is ignored in this case. If the specified property exists and + either AnyPropertyType is specified or the specified type matches the actual + type of the property, then the return type is the actual type of the property, + the format is the actual format of the property + (never zero), and the bytes-after and value are as follows, given: + N = actual length of the stored property in bytes + (even if the format is 16 or 32) + I = 4 * long-offset + T = N−I + L = MINIMUM(T, 4 * long-length) + A = N − (I + L) + The returned value starts at byte index I in the property (indexing + from 0), and its length in bytes is L. However, it is a Value error if + offset is given such that L is negative. The value of bytes_after is A, + giving the number of trailing unread bytes in the stored property. If + delete is True and the bytes_after is zero, the property is also + deleted from the device, and a XIPropertyNotify event is generated on + the device. + + +8. Events: + +An event specifies its length in 4-byte units after the initial 32 bytes. +Future versions of the protocol may provide additional information +in the same event, thus increasing the event size. Clients are required to +always read the number of bytes specified by the event, not the size of the +event they may have been compiled against. + + +The following event types are available in XI2. + +Version 2.0: + HierarchyChanged + DeviceChanged + KeyPress + KeyRelease + ButtonPress + ButtonRelease + Motion + RawEvent + Enter + Leave + +All events have a set of common fields specified as EVENTHEADER. + + +EVENTHEADER { type: BYTE + extension: BYTE + sequenceNumber: CARD16 + length: CARD32 + evtype: CARD16 + deviceid: DEVICEID + time: Time } + + type + Always GenericEvent. + extension + Always the X Input extension offset. + sequenceNumber + Sequence number of last request processed by the server. + length + Length in 4-byte units after the initial 32 bytes. + evtype + XI-specific event type. + deviceid + Numerical device id for a device. + time + Time in ms. + + + ┌─── + HierarchyEvent: + EVENTHEADER + flags: SETofHIERARCHYMASK + num_info: CARD16 + info: LISTofHIERARCHYINFO + └─── + + + HIERARCHYMASK { MasterAdded, MasterRemoved, SlaveAttached, SlaveDetached, + SlaveAdded, SlaveRemoved, DeviceEnabled, DeviceDisabled } + + HIERARCHYINFO { deviceid: DEVICEID, + attachment: DEVICEID, + type: DEVICEUSE + enabled: BOOL + flags: SETofHIERARCHYMASK} + + flags + Set of the changes that have occured, causing this event. + num_info + The number of device info structs following the request. + info: + The current hierarchy information. + + An XIHierarchyEvent is sent whenever the device hierarchy been + changed. The 'flags' specify all types of hierarchy modifiations that have + occured. + For all devices, 'info' details the hierarchy information after the + modification of the hierarchy has occured. For each device specified with + 'deviceid': + - if 'type' is MasterPointer or MasterKeyboard, 'attachment' decribes the + pairing of this device. + - if 'type' is SlavePointer or SlaveKeyboard, 'attachment' describes the + master device this device is attached to. + - if 'type' is FloatingSlave device, 'attachment' is undefined. + + enabled + TRUE if the device is enabled and can send events. A disabled master + device will not forward events from an attached, enabled slave + device. + + Note: Multiple devices may be affected in one hierarchy change, + 'deviceid' in an XIHierarchyEvent is always the first affected + device. Clients should ignore deviceid and instead use the 'devices' list. + + ┌─── + DeviceChangedEvent: + EVENTHEADER + reason: CHANGEREASON + source: DEVICEID + num_classes: CARD16 + classes: LISTofCLASS + └─── + + CHANGEREASON { SlaveSwitch, DeviceChange } + + A DeviceChangeEvent is sent whenever a device changes it's capabilities. + This can happen either by a new slave device sending events through a + master device, or by a physical device changing capabilities at runtime. + + reason + The reason for generating this event. + If 'reason' is SlaveSwitch, the slave device sending events through + this device has changed and 'source' specifies the new slave device. + A SlaveSwitch 'reason' can only occur on a master device. + If 'reason' is DeviceChange, the device itself has changed through + other means (e.g. a physical device change) and 'source' is + undefined. + source + The source of the new classes. Only defined in 'reason' is + SlaveSwitch. + num_classes + Number of 'classes' provided. + classes + Details the available classes provided by the device. The order the + classes are provided in is undefined. + + For a detailed description of 'classes', see the XQueryInputDevice + request. + + ┌─── + DeviceEvent: + EVENTHEADER + detail: CARD32 + root: Window + event: Window + child: Window + root_x: FP1616 + root_y: FP1616 + event_x: FP1616 + event_y: FP1616 + buttons_len: CARD16 + valuators_len: CARD16 + sourceid: DEVICEID + mods: MODIFIERINFO + group: GROUPINFO + flags: DEVICEEEVENTFLAGS + buttons: SETofBUTTONMASK + valuators: SETofVALUATORMASK + axisvalues: LISTofFP3232 + └─── + + BUTTONBIT { (1 << Button1), (1 << Button2), ... , (1 << ButtonN) } + VALUATORBIT { (1 << 1), ( 1 << 2), ... ( 1 << n) } + + MODIFIERINFO { base_mods: CARD32, + latched_mods: CARD32, + locked_mods: CARD32, + effective_mods: CARD32} + GROUPINFO { base_group: CARD8, + latched_group: CARD8, + locked_group: CARD8, + effective_group: CARD8} + + DEVICEEVENTFLAGS (all events): none + DEVICEEVENTFLAGS (key events only): { KeyRepeat } + DEVICEEVENTFLAGS (pointer events only): none + + An XIDeviceEvent is generated whenever the logical state of a device + changes in response to a button press, a button release, a motion, a key + press or a key release. + + detail + The button number or key code, or 0. + root + event + child + The root window, event window or subwindow, respectively. See core + protocol specification for more detail. + root_x + root_y + The position of the pointer in screen coordinates (16.16 fixed point). + event_x + event_y + The position of the pointer in screen coordinates relative to the + event window (16.16 fixed point). + + buttons_len + The length of 'buttons' in 4 byte units. + valuators_len + The length of 'valuators' in 4 byte units. + sourceid + The source device that originally generated the event. + mods + XKB modifier state before the event occured. + group + XKB group state before the event. + buttons + Button state before the event. + valuators + Bitmask of valuators provided in 'axisvalues'. + axisvalues + Valuator data in device-native resolution. + flags + Miscellaneous information about this event; the union of the + common flag set and either the key or pointer flag set, + depending on the event type. + KeyRepeat means that this event is for repeating purposes, and + the physical state of the key has not changed. This is only + valid for KeyPress events. + + Modifier state in 'mods' is detailed as follows: + base_mods + XKB base modifier state. + latched_mods + XKB latched modifier state. + locked_mods + XKB locked modifier state. + + Group state in 'group' is detailed as follows: + base_group + XKB base group state. + latched_group + XKB latched group state. + locked_group + XKB locked group state. + + ┌─── + RawEvent + EVENTHEADER + detail: CARD32 + flags: DEVICEEVENTFLAGS + valuators_len: CARD16 + valuators: SETofVALUATORMASK + axisvalues: LISTofFP3232 + axisvalues_raw: LISTofFP3232 + └─── + + A RawDevice event provides the information provided by the driver to the + client. RawDevice provide both the raw data as supplied by the driver and + transformed data as used in the server. Transformations include, but are + not limited to, axis clipping and acceleration. + Transformed valuator data may be equivalent to raw data. In this case, + both raw and transformed valuator data is provided. + RawEvents are sent exclusively to all root windows or to the client + that grabbed the device only. + + eventtype + The type of event that occured on the device. + detail + The button number or keycode. + flags + Flags as described in DeviceEvent::flags. + valuators_len + The length of 'valuators' in 4 byte units. + valuators + Bitmask of valuators provided in 'axisvalues' and 'axisvalues_raw'. + axisvalues + Valuator data in device-native resolution. + axisvalues_raw + Untransformed valuator data in device-native resolution. + + ┌─── + Enter or Leave or FocusIn or FocusOut + EVENTHEADER + root: Window + event: Window + child: Window + sourceid: DEVICEID + root_x: FP1616 + root_y: FP1616 + event_x FP1616 + event_y: FP1616 + mode: NOTIFYMODE + detail: NOTIFYDETAIL + same_screen: BOOL + focus: BOOL + mods: MODIFIERINFO + group: GROUPINFO + buttons_len: CARD16 + buttons: SETofBUTTONMASK + └─── + + NOTIFYMODE { Normal, Grab, Ungrab } + NOTIFYDETAIL { Ancestor, Virtual, Inferior, Nonlinear, NonlinearVirtual, + Pointer, PointerRoot, None } + + Enter or Leave events are sent whenever a device's pointer enters or + leaves a window. + FocusIn or FocusOut events are sent whenever a device's focus is set to or + away from a window. + The enter/leave and focus in/out model is described in the core protocol + specification, Section 11. (EnterNotify, LeaveNotify events). + + For enter and leave events, the modifier and group state is the state of + the paired master device if the device is a master device, or the state of + the attached master keyboard if the device is an attached slave device, or + zero if the device is a floating slave device. + + For focus in and out events, the button state is the state of the paired + master device if the device is a master device, or the state of the + attached master keyboard if the device is an attached slave device, or + zero if the device is a floating slave device. + + root + event + child + The root window, event window, and child window, respectively. See the + core protocol specification for more detail. + sourceid + The device that caused the pointer to move. + root_x + root_y + The pointer coordinates relative to the root window. + event_x + event_y + The pointer coordinates relative to the event window. + mode + Normal pointer motion events have mode Normal. Pseudo-motion events + when a grab activates have mode Grab, and pseudo-motion events when a + grab deactivates have mode Ungrab. Pseudo-motion events caused by the + activation or deactivation of a passive enter or focus in grab have mode + XIPassiveGrabNotify or XIPassiveUngrabNotify. + detail + Specifies the relation of the event window to the window the pointer + entered or left. See the core protocol spec for details. + same_screen + TRUE if the event window is on the same screen as the pointer's root + window. + focus + If the event window is the focus window or an inferior of the focus + window, then focus is True. Otherwise, focus is False. This field is + unspecified for focus in/out events. + mods + XKB modifier state before the event occured. + group + XKB group state before the event. + buttons_len + The length of 'buttons' in 4 byte units. + buttons + Button state before the event. + + ┌─── + XIPropertyEvent + EVENTHEADER + property: ATOM + what: { PropertyCreated, PropertyDeleted, PropertyModified } + └─── + + XIPropertyEvents are sent whenever a device property is created, deleted or + modified by a client. + + property + The property that has been created, deleted, or modified + what + Specifies what has been changed. + + + ❧❧❧❧❧❧❧❧❧❧❧ |