diff options
Diffstat (limited to 'X11/xtrans/Xtrans.c')
| -rw-r--r-- | X11/xtrans/Xtrans.c | 2752 |
1 files changed, 1368 insertions, 1384 deletions
diff --git a/X11/xtrans/Xtrans.c b/X11/xtrans/Xtrans.c index e86b6c645..879a1d309 100644 --- a/X11/xtrans/Xtrans.c +++ b/X11/xtrans/Xtrans.c @@ -1,1384 +1,1368 @@ -/* - -Copyright 1993, 1994, 1998 The Open Group - -Permission to use, copy, modify, distribute, and sell this software and its -documentation for any purpose is hereby granted without fee, provided that -the above copyright notice appear in all copies and that both that -copyright notice and this permission notice appear in supporting -documentation. - -The above copyright notice and this permission notice shall be included -in all copies or substantial portions of the Software. - -THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS -OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF -MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. -IN NO EVENT SHALL THE OPEN GROUP BE LIABLE FOR ANY CLAIM, DAMAGES OR -OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, -ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR -OTHER DEALINGS IN THE SOFTWARE. - -Except as contained in this notice, the name of The Open Group shall -not be used in advertising or otherwise to promote the sale, use or -other dealings in this Software without prior written authorization -from The Open Group. - - * Copyright 1993, 1994 NCR Corporation - Dayton, Ohio, USA - * - * All Rights Reserved - * - * Permission to use, copy, modify, and distribute this software and its - * documentation for any purpose and without fee is hereby granted, provided - * that the above copyright notice appear in all copies and that both that - * copyright notice and this permission notice appear in supporting - * documentation, and that the name NCR not be used in advertising - * or publicity pertaining to distribution of the software without specific, - * written prior permission. NCR makes no representations about the - * suitability of this software for any purpose. It is provided "as is" - * without express or implied warranty. - * - * NCR DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE, - * INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN - * NO EVENT SHALL NCR BE LIABLE FOR ANY SPECIAL, INDIRECT OR - * CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS - * OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, - * NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN - * CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. - */ - -#include <ctype.h> - -#ifdef _MSC_VER -#include <X11\Xwinsock.h> -#endif -/* - * The transport table contains a definition for every transport (protocol) - * family. All operations that can be made on the transport go through this - * table. - * - * Each transport is assigned a unique transport id. - * - * New transports can be added by adding an entry in this table. - * For compatiblity, the transport ids should never be renumbered. - * Always add to the end of the list. - */ - -#define TRANS_TLI_INET_INDEX 1 -#define TRANS_TLI_TCP_INDEX 2 -#define TRANS_TLI_TLI_INDEX 3 -#define TRANS_SOCKET_UNIX_INDEX 4 -#define TRANS_SOCKET_LOCAL_INDEX 5 -#define TRANS_SOCKET_INET_INDEX 6 -#define TRANS_SOCKET_TCP_INDEX 7 -#define TRANS_DNET_INDEX 8 -#define TRANS_LOCAL_LOCAL_INDEX 9 -#define TRANS_LOCAL_PTS_INDEX 10 -#define TRANS_LOCAL_NAMED_INDEX 11 -/* 12 used to be ISC, but that's gone. */ -#define TRANS_LOCAL_SCO_INDEX 13 -#define TRANS_SOCKET_INET6_INDEX 14 -#define TRANS_LOCAL_PIPE_INDEX 15 - - -static -Xtransport_table Xtransports[] = { -#if defined(STREAMSCONN) - { &TRANS(TLITCPFuncs), TRANS_TLI_TCP_INDEX }, - { &TRANS(TLIINETFuncs), TRANS_TLI_INET_INDEX }, - { &TRANS(TLITLIFuncs), TRANS_TLI_TLI_INDEX }, -#endif /* STREAMSCONN */ -#if defined(TCPCONN) - { &TRANS(SocketTCPFuncs), TRANS_SOCKET_TCP_INDEX }, -#if defined(IPv6) && defined(AF_INET6) - { &TRANS(SocketINET6Funcs), TRANS_SOCKET_INET6_INDEX }, -#endif /* IPv6 */ - { &TRANS(SocketINETFuncs), TRANS_SOCKET_INET_INDEX }, -#endif /* TCPCONN */ -#if defined(UNIXCONN) -#if !defined(LOCALCONN) - { &TRANS(SocketLocalFuncs), TRANS_SOCKET_LOCAL_INDEX }, -#endif /* !LOCALCONN */ - { &TRANS(SocketUNIXFuncs), TRANS_SOCKET_UNIX_INDEX }, -#endif /* UNIXCONN */ -#if defined(LOCALCONN) - { &TRANS(LocalFuncs), TRANS_LOCAL_LOCAL_INDEX }, -#ifndef sun - { &TRANS(PTSFuncs), TRANS_LOCAL_PTS_INDEX }, -#endif /* sun */ -#if defined(SVR4) || defined(__SVR4) - { &TRANS(NAMEDFuncs), TRANS_LOCAL_NAMED_INDEX }, -#endif -#ifdef sun - { &TRANS(PIPEFuncs), TRANS_LOCAL_PIPE_INDEX }, -#endif /* sun */ -#if defined(__SCO__) || defined(__UNIXWARE__) - { &TRANS(SCOFuncs), TRANS_LOCAL_SCO_INDEX }, -#endif /* __SCO__ || __UNIXWARE__ */ -#endif /* LOCALCONN */ - { NULL, 0} -}; - -#define NUMTRANS (sizeof(Xtransports)/sizeof(Xtransport_table)-1) - - -#ifdef WIN32 -#define ioctl ioctlsocket -#endif - - - -/* - * These are a few utility function used by the public interface functions. - */ - -void -TRANS(FreeConnInfo) (XtransConnInfo ciptr) - -{ - PRMSG (3,"FreeConnInfo(%p)\n", ciptr, 0, 0); - - if (ciptr->addr) - xfree (ciptr->addr); - - if (ciptr->peeraddr) - xfree (ciptr->peeraddr); - - if (ciptr->port) - xfree (ciptr->port); - - xfree ((char *) ciptr); -} - - -#define PROTOBUFSIZE 20 - -static Xtransport * -TRANS(SelectTransport) (char *protocol) - -{ - char protobuf[PROTOBUFSIZE]; - int i; - - PRMSG (3,"SelectTransport(%s)\n", protocol, 0, 0); - - /* - * Force Protocol to be lowercase as a way of doing - * a case insensitive match. - */ - - strncpy (protobuf, protocol, PROTOBUFSIZE - 1); - protobuf[PROTOBUFSIZE-1] = '\0'; - - for (i = 0; i < PROTOBUFSIZE && protobuf[i] != '\0'; i++) - if (isupper (protobuf[i])) - protobuf[i] = tolower (protobuf[i]); - - /* Look at all of the configured protocols */ - - for (i = 0; i < NUMTRANS; i++) - { - if (!strcmp (protobuf, Xtransports[i].transport->TransName)) - return Xtransports[i].transport; - } - - return NULL; -} - -#ifndef TEST_t -static -#endif /* TEST_t */ -int -TRANS(ParseAddress) (char *address, char **protocol, char **host, char **port) - -{ - /* - * For the font library, the address is a string formatted - * as "protocol/host:port[/catalogue]". Note that the catologue - * is optional. At this time, the catologue info is ignored, but - * we have to parse it anyways. - * - * Other than fontlib, the address is a string formatted - * as "protocol/host:port". - * - * If the protocol part is missing, then assume TCP. - * If the protocol part and host part are missing, then assume local. - * If a "::" is found then assume DNET. - */ - - char *mybuf, *tmpptr; - char *_protocol, *_host, *_port; - char hostnamebuf[256]; - int _host_len; - - PRMSG (3,"ParseAddress(%s)\n", address, 0, 0); - - /* Copy the string so it can be changed */ - - tmpptr = mybuf = (char *) xalloc (strlen (address) + 1); - strcpy (mybuf, address); - - /* Parse the string to get each component */ - - /* Get the protocol part */ - - _protocol = mybuf; - - - if ( ((mybuf = strchr (mybuf,'/')) == NULL) && - ((mybuf = strrchr (tmpptr,':')) == NULL) ) - { - /* address is in a bad format */ - *protocol = NULL; - *host = NULL; - *port = NULL; - xfree (tmpptr); - return 0; - } - - if (*mybuf == ':') - { - /* - * If there is a hostname, then assume tcp, otherwise - * it must be local. - */ - if (mybuf == tmpptr) - { - /* There is neither a protocol or host specified */ - _protocol = "local"; - } - else - { - /* There is a hostname specified */ - _protocol = "tcp"; - mybuf = tmpptr; /* reset to the begining of the host ptr */ - } - } - else - { - /* *mybuf == '/' */ - - *mybuf ++= '\0'; /* put a null at the end of the protocol */ - - if (strlen(_protocol) == 0) - { - /* - * If there is a hostname, then assume tcp, otherwise - * it must be local. - */ - if (*mybuf != ':') - _protocol = "tcp"; - else - _protocol = "local"; - } - } - - /* Get the host part */ - - _host = mybuf; - - if ((mybuf = strrchr (mybuf,':')) == NULL) - { - *protocol = NULL; - *host = NULL; - *port = NULL; - xfree (tmpptr); - return 0; - } - - /* Check for DECnet */ - - if ((mybuf != _host) && (*(mybuf - 1) == ':') -#if defined(IPv6) && defined(AF_INET6) - /* An IPv6 address can end in :: so three : in a row is assumed to be - an IPv6 host and not a DECnet node with a : in it's name, unless - DECnet is specifically requested */ - && ( ((mybuf - 1) == _host) || (*(mybuf - 2) != ':') || - ((_protocol != NULL) && (strcmp(_protocol, "dnet") == 0)) ) -#endif - ) - { - _protocol = "dnet"; - *(mybuf - 1) = '\0'; - } - - *mybuf ++= '\0'; - - _host_len = strlen(_host); - if (_host_len == 0) - { - TRANS(GetHostname) (hostnamebuf, sizeof (hostnamebuf)); - _host = hostnamebuf; - } -#if defined(IPv6) && defined(AF_INET6) - /* hostname in IPv6 [numeric_addr]:0 form? */ - else if ( (_host_len > 3) && - ((strcmp(_protocol, "tcp") == 0) || (strcmp(_protocol, "inet6") == 0)) - && (*_host == '[') && (*(_host + _host_len - 1) == ']') ) { - struct sockaddr_in6 sin6; - - *(_host + _host_len - 1) = '\0'; - - /* Verify address is valid IPv6 numeric form */ - if (inet_pton(AF_INET6, _host + 1, &sin6) == 1) { - /* It is. Use it as such. */ - _host++; - _protocol = "inet6"; - } else { - /* It's not, restore it just in case some other code can use it. */ - *(_host + _host_len - 1) = ']'; - } - } -#endif - - - /* Get the port */ - - _port = mybuf; - -#if defined(FONT_t) || defined(FS_t) - /* - * Is there an optional catalogue list? - */ - - if ((mybuf = strchr (mybuf,'/')) != NULL) - *mybuf ++= '\0'; - - /* - * The rest, if any, is the (currently unused) catalogue list. - * - * _catalogue = mybuf; - */ -#endif - -#ifdef HAVE_LAUNCHD - /* launchd sockets will look like 'local//tmp/launch-XgkNns/:0' */ - if(address != NULL && strlen(address)>8 && (!strncmp(address,"local//",7))) { - _protocol="local"; - _host=""; - _port=address+6; - } -#endif - - /* - * Now that we have all of the components, allocate new - * string space for them. - */ - - if ((*protocol = (char *) xalloc(strlen (_protocol) + 1)) == NULL) - { - /* Malloc failed */ - *port = NULL; - *host = NULL; - *protocol = NULL; - xfree (tmpptr); - return 0; - } - else - strcpy (*protocol, _protocol); - - if ((*host = (char *) xalloc (strlen (_host) + 1)) == NULL) - { - /* Malloc failed */ - *port = NULL; - *host = NULL; - xfree (*protocol); - *protocol = NULL; - xfree (tmpptr); - return 0; - } - else - strcpy (*host, _host); - - if ((*port = (char *) xalloc (strlen (_port) + 1)) == NULL) - { - /* Malloc failed */ - *port = NULL; - xfree (*host); - *host = NULL; - xfree (*protocol); - *protocol = NULL; - xfree (tmpptr); - return 0; - } - else - strcpy (*port, _port); - - xfree (tmpptr); - - return 1; -} - - -/* - * TRANS(Open) does all of the real work opening a connection. The only - * funny part about this is the type parameter which is used to decide which - * type of open to perform. - */ - -static XtransConnInfo -TRANS(Open) (int type, char *address) - -{ - char *protocol = NULL, *host = NULL, *port = NULL; - XtransConnInfo ciptr = NULL; - Xtransport *thistrans; - - PRMSG (2,"Open(%d,%s)\n", type, address, 0); - -#if defined(WIN32) && defined(TCPCONN) - if (TRANS(WSAStartup)()) - { - PRMSG (1,"Open: WSAStartup failed\n", 0, 0, 0); - return NULL; - } -#endif - - /* Parse the Address */ - - if (TRANS(ParseAddress) (address, &protocol, &host, &port) == 0) - { - PRMSG (1,"Open: Unable to Parse address %s\n", address, 0, 0); - return NULL; - } - - /* Determine the transport type */ - - if ((thistrans = TRANS(SelectTransport) (protocol)) == NULL) - { - PRMSG (1,"Open: Unable to find transport for %s\n", - protocol, 0, 0); - - xfree (protocol); - xfree (host); - xfree (port); - return NULL; - } - - /* Open the transport */ - - switch (type) - { - case XTRANS_OPEN_COTS_CLIENT: -#ifdef TRANS_CLIENT - ciptr = thistrans->OpenCOTSClient(thistrans, protocol, host, port); -#endif /* TRANS_CLIENT */ - break; - case XTRANS_OPEN_COTS_SERVER: -#ifdef TRANS_SERVER - ciptr = thistrans->OpenCOTSServer(thistrans, protocol, host, port); -#endif /* TRANS_SERVER */ - break; - case XTRANS_OPEN_CLTS_CLIENT: -#ifdef TRANS_CLIENT - ciptr = thistrans->OpenCLTSClient(thistrans, protocol, host, port); -#endif /* TRANS_CLIENT */ - break; - case XTRANS_OPEN_CLTS_SERVER: -#ifdef TRANS_SERVER - ciptr = thistrans->OpenCLTSServer(thistrans, protocol, host, port); -#endif /* TRANS_SERVER */ - break; - default: - PRMSG (1,"Open: Unknown Open type %d\n", type, 0, 0); - } - - if (ciptr == NULL) - { - if (!(thistrans->flags & TRANS_DISABLED)) - { - PRMSG (1,"Open: transport open failed for %s/%s:%s\n", - protocol, host, port); - } - xfree (protocol); - xfree (host); - xfree (port); - return NULL; - } - - ciptr->transptr = thistrans; - ciptr->port = port; /* We need this for TRANS(Reopen) */ - - xfree (protocol); - xfree (host); - - return ciptr; -} - - -#ifdef TRANS_REOPEN - -/* - * We might want to create an XtransConnInfo object based on a previously - * opened connection. For example, the font server may clone itself and - * pass file descriptors to the parent. - */ - -static XtransConnInfo -TRANS(Reopen) (int type, int trans_id, int fd, char *port) - -{ - XtransConnInfo ciptr = NULL; - Xtransport *thistrans = NULL; - char *save_port; - int i; - - PRMSG (2,"Reopen(%d,%d,%s)\n", trans_id, fd, port); - - /* Determine the transport type */ - - for (i = 0; i < NUMTRANS; i++) - if (Xtransports[i].transport_id == trans_id) - { - thistrans = Xtransports[i].transport; - break; - } - - if (thistrans == NULL) - { - PRMSG (1,"Reopen: Unable to find transport id %d\n", - trans_id, 0, 0); - - return NULL; - } - - if ((save_port = (char *) xalloc (strlen (port) + 1)) == NULL) - { - PRMSG (1,"Reopen: Unable to malloc port string\n", 0, 0, 0); - - return NULL; - } - - strcpy (save_port, port); - - /* Get a new XtransConnInfo object */ - - switch (type) - { - case XTRANS_OPEN_COTS_SERVER: - ciptr = thistrans->ReopenCOTSServer(thistrans, fd, port); - break; - case XTRANS_OPEN_CLTS_SERVER: - ciptr = thistrans->ReopenCLTSServer(thistrans, fd, port); - break; - default: - PRMSG (1,"Reopen: Bad Open type %d\n", type, 0, 0); - } - - if (ciptr == NULL) - { - PRMSG (1,"Reopen: transport open failed\n", 0, 0, 0); - return NULL; - } - - ciptr->transptr = thistrans; - ciptr->port = save_port; - - return ciptr; -} - -#endif /* TRANS_REOPEN */ - - - -/* - * These are the public interfaces to this Transport interface. - * These are the only functions that should have knowledge of the transport - * table. - */ - -#ifdef TRANS_CLIENT - -XtransConnInfo -TRANS(OpenCOTSClient) (char *address) - -{ - PRMSG (2,"OpenCOTSClient(%s)\n", address, 0, 0); - return TRANS(Open) (XTRANS_OPEN_COTS_CLIENT, address); -} - -#endif /* TRANS_CLIENT */ - - -#ifdef TRANS_SERVER - -XtransConnInfo -TRANS(OpenCOTSServer) (char *address) - -{ - PRMSG (2,"OpenCOTSServer(%s)\n", address, 0, 0); - return TRANS(Open) (XTRANS_OPEN_COTS_SERVER, address); -} - -#endif /* TRANS_SERVER */ - - -#ifdef TRANS_CLIENT - -XtransConnInfo -TRANS(OpenCLTSClient) (char *address) - -{ - PRMSG (2,"OpenCLTSClient(%s)\n", address, 0, 0); - return TRANS(Open) (XTRANS_OPEN_CLTS_CLIENT, address); -} - -#endif /* TRANS_CLIENT */ - - -#ifdef TRANS_SERVER - -XtransConnInfo -TRANS(OpenCLTSServer) (char *address) - -{ - PRMSG (2,"OpenCLTSServer(%s)\n", address, 0, 0); - return TRANS(Open) (XTRANS_OPEN_CLTS_SERVER, address); -} - -#endif /* TRANS_SERVER */ - - -#ifdef TRANS_REOPEN - -XtransConnInfo -TRANS(ReopenCOTSServer) (int trans_id, int fd, char *port) - -{ - PRMSG (2,"ReopenCOTSServer(%d, %d, %s)\n", trans_id, fd, port); - return TRANS(Reopen) (XTRANS_OPEN_COTS_SERVER, trans_id, fd, port); -} - -XtransConnInfo -TRANS(ReopenCLTSServer) (int trans_id, int fd, char *port) - -{ - PRMSG (2,"ReopenCLTSServer(%d, %d, %s)\n", trans_id, fd, port); - return TRANS(Reopen) (XTRANS_OPEN_CLTS_SERVER, trans_id, fd, port); -} - - -int -TRANS(GetReopenInfo) (XtransConnInfo ciptr, - int *trans_id, int *fd, char **port) - -{ - int i; - - for (i = 0; i < NUMTRANS; i++) - if (Xtransports[i].transport == ciptr->transptr) - { - *trans_id = Xtransports[i].transport_id; - *fd = ciptr->fd; - - if ((*port = (char *) xalloc (strlen (ciptr->port) + 1)) == NULL) - return 0; - else - { - strcpy (*port, ciptr->port); - return 1; - } - } - - return 0; -} - -#endif /* TRANS_REOPEN */ - - -int -TRANS(SetOption) (XtransConnInfo ciptr, int option, int arg) - -{ - int fd = ciptr->fd; - int ret = 0; - - PRMSG (2,"SetOption(%d,%d,%d)\n", fd, option, arg); - - /* - * For now, all transport type use the same stuff for setting options. - * As long as this is true, we can put the common code here. Once a more - * complicated transport such as shared memory or an OSI implementation - * that uses the session and application libraries is implemented, this - * code may have to move to a transport dependent function. - * - * ret = ciptr->transptr->SetOption (ciptr, option, arg); - */ - - switch (option) - { - case TRANS_NONBLOCKING: - switch (arg) - { - case 0: - /* Set to blocking mode */ - break; - case 1: /* Set to non-blocking mode */ - -#if defined(O_NONBLOCK) && !defined(SCO325) - ret = fcntl (fd, F_GETFL, 0); - if (ret != -1) - ret = fcntl (fd, F_SETFL, ret | O_NONBLOCK); -#else -#ifdef FIOSNBIO - { - int arg; - arg = 1; - ret = ioctl (fd, FIOSNBIO, &arg); - } -#else -#if defined(WIN32) - { -#ifdef WIN32 - unsigned long arg; -#else - int arg; -#endif - arg = 1; -/* IBM TCP/IP understands this option too well: it causes TRANS(Read) to fail - * eventually with EWOULDBLOCK */ - ret = ioctl (fd, FIONBIO, &arg); - } -#else - ret = fcntl (fd, F_GETFL, 0); -#ifdef FNDELAY - ret = fcntl (fd, F_SETFL, ret | FNDELAY); -#else - ret = fcntl (fd, F_SETFL, ret | O_NDELAY); -#endif -#endif /* AIXV3 || uniosu */ -#endif /* FIOSNBIO */ -#endif /* O_NONBLOCK */ - break; - default: - /* Unknown option */ - break; - } - break; - case TRANS_CLOSEONEXEC: -#ifdef F_SETFD -#ifdef FD_CLOEXEC - ret = fcntl (fd, F_SETFD, FD_CLOEXEC); -#else - ret = fcntl (fd, F_SETFD, 1); -#endif /* FD_CLOEXEC */ -#endif /* F_SETFD */ - break; - } - - return ret; -} - -#ifdef TRANS_SERVER - -int -TRANS(CreateListener) (XtransConnInfo ciptr, char *port, unsigned int flags) - -{ - return ciptr->transptr->CreateListener (ciptr, port, flags); -} - -int -TRANS(NoListen) (char * protocol) - -{ - Xtransport *trans; - int i = 0, ret = 0; - - if ((trans = TRANS(SelectTransport)(protocol)) == NULL) - { - PRMSG (1,"TransNoListen: unable to find transport: %s\n", - protocol, 0, 0); - - return -1; - } - if (trans->flags & TRANS_ALIAS) { - if (trans->nolisten) - while (trans->nolisten[i]) { - ret |= TRANS(NoListen)(trans->nolisten[i]); - i++; - } - } - - trans->flags |= TRANS_NOLISTEN; - return ret; -} - -int -TRANS(ResetListener) (XtransConnInfo ciptr) - -{ - if (ciptr->transptr->ResetListener) - return ciptr->transptr->ResetListener (ciptr); - else - return TRANS_RESET_NOOP; -} - - -XtransConnInfo -TRANS(Accept) (XtransConnInfo ciptr, int *status) - -{ - XtransConnInfo newciptr; - - PRMSG (2,"Accept(%d)\n", ciptr->fd, 0, 0); - - newciptr = ciptr->transptr->Accept (ciptr, status); - - if (newciptr) - newciptr->transptr = ciptr->transptr; - - return newciptr; -} - -#endif /* TRANS_SERVER */ - - -#ifdef TRANS_CLIENT - -int -TRANS(Connect) (XtransConnInfo ciptr, char *address) - -{ - char *protocol; - char *host; - char *port; - int ret; - - PRMSG (2,"Connect(%d,%s)\n", ciptr->fd, address, 0); - - if (TRANS(ParseAddress) (address, &protocol, &host, &port) == 0) - { - PRMSG (1,"Connect: Unable to Parse address %s\n", - address, 0, 0); - return -1; - } - -#ifdef HAVE_LAUNCHD - if (!host) host=strdup(""); -#endif - - if (!port || !*port) - { - PRMSG (1,"Connect: Missing port specification in %s\n", - address, 0, 0); - if (protocol) xfree (protocol); - if (host) xfree (host); - return -1; - } - - ret = ciptr->transptr->Connect (ciptr, host, port); - - if (protocol) xfree (protocol); - if (host) xfree (host); - if (port) xfree (port); - - return ret; -} - -#endif /* TRANS_CLIENT */ - - -int -TRANS(BytesReadable) (XtransConnInfo ciptr, BytesReadable_t *pend) - -{ - return ciptr->transptr->BytesReadable (ciptr, pend); -} - -int -TRANS(Read) (XtransConnInfo ciptr, char *buf, int size) - -{ - return ciptr->transptr->Read (ciptr, buf, size); -} - -int -TRANS(Write) (XtransConnInfo ciptr, char *buf, int size) - -{ - return ciptr->transptr->Write (ciptr, buf, size); -} - -int -TRANS(Readv) (XtransConnInfo ciptr, struct iovec *buf, int size) - -{ - return ciptr->transptr->Readv (ciptr, buf, size); -} - -int -TRANS(Writev) (XtransConnInfo ciptr, struct iovec *buf, int size) - -{ - return ciptr->transptr->Writev (ciptr, buf, size); -} - -int -TRANS(Disconnect) (XtransConnInfo ciptr) - -{ - return ciptr->transptr->Disconnect (ciptr); -} - -int -TRANS(Close) (XtransConnInfo ciptr) - -{ - int ret; - - PRMSG (2,"Close(%d)\n", ciptr->fd, 0, 0); - - ret = ciptr->transptr->Close (ciptr); - - TRANS(FreeConnInfo) (ciptr); - - return ret; -} - -int -TRANS(CloseForCloning) (XtransConnInfo ciptr) - -{ - int ret; - - PRMSG (2,"CloseForCloning(%d)\n", ciptr->fd, 0, 0); - - ret = ciptr->transptr->CloseForCloning (ciptr); - - TRANS(FreeConnInfo) (ciptr); - - return ret; -} - -int -TRANS(IsLocal) (XtransConnInfo ciptr) - -{ - return (ciptr->family == AF_UNIX); -} - - -int -TRANS(GetMyAddr) (XtransConnInfo ciptr, int *familyp, int *addrlenp, - Xtransaddr **addrp) - -{ - PRMSG (2,"GetMyAddr(%d)\n", ciptr->fd, 0, 0); - - *familyp = ciptr->family; - *addrlenp = ciptr->addrlen; - - if ((*addrp = (Xtransaddr *) xalloc (ciptr->addrlen)) == NULL) - { - PRMSG (1,"GetMyAddr: malloc failed\n", 0, 0, 0); - return -1; - } - memcpy(*addrp, ciptr->addr, ciptr->addrlen); - - return 0; -} - -int -TRANS(GetPeerAddr) (XtransConnInfo ciptr, int *familyp, int *addrlenp, - Xtransaddr **addrp) - -{ - PRMSG (2,"GetPeerAddr(%d)\n", ciptr->fd, 0, 0); - - *familyp = ciptr->family; - *addrlenp = ciptr->peeraddrlen; - - if ((*addrp = (Xtransaddr *) xalloc (ciptr->peeraddrlen)) == NULL) - { - PRMSG (1,"GetPeerAddr: malloc failed\n", 0, 0, 0); - return -1; - } - memcpy(*addrp, ciptr->peeraddr, ciptr->peeraddrlen); - - return 0; -} - - -int -TRANS(GetConnectionNumber) (XtransConnInfo ciptr) - -{ - return ciptr->fd; -} - - -/* - * These functions are really utility functions, but they require knowledge - * of the internal data structures, so they have to be part of the Transport - * Independant API. - */ - -#ifdef TRANS_SERVER - -static int -complete_network_count (void) - -{ - int count = 0; - int found_local = 0; - int i; - - /* - * For a complete network, we only need one LOCALCONN transport to work - */ - - for (i = 0; i < NUMTRANS; i++) - { - if (Xtransports[i].transport->flags & TRANS_ALIAS - || Xtransports[i].transport->flags & TRANS_NOLISTEN) - continue; - - if (Xtransports[i].transport->flags & TRANS_LOCAL) - found_local = 1; - else - count++; - } - - return (count + found_local); -} - - -#ifdef XQUARTZ_EXPORTS_LAUNCHD_FD -extern int xquartz_launchd_fd; -#endif - -int -TRANS(MakeAllCOTSServerListeners) (char *port, int *partial, int *count_ret, - XtransConnInfo **ciptrs_ret) - -{ - char buffer[256]; /* ??? What size ?? */ - XtransConnInfo ciptr, temp_ciptrs[NUMTRANS]; - int status, i, j; - -#if defined(IPv6) && defined(AF_INET6) - int ipv6_succ = 0; -#endif - PRMSG (2,"MakeAllCOTSServerListeners(%s,%p)\n", - port ? port : "NULL", ciptrs_ret, 0); - - *count_ret = 0; - -#ifdef XQUARTZ_EXPORTS_LAUNCHD_FD - fprintf(stderr, "Launchd socket fd: %d\n", xquartz_launchd_fd); - if(xquartz_launchd_fd != -1) { - if((ciptr = TRANS(ReopenCOTSServer(TRANS_SOCKET_LOCAL_INDEX, - xquartz_launchd_fd, getenv("DISPLAY"))))==NULL) - fprintf(stderr,"Got NULL while trying to Reopen launchd port\n"); - else - temp_ciptrs[(*count_ret)++] = ciptr; - } -#endif - - for (i = 0; i < NUMTRANS; i++) - { - Xtransport *trans = Xtransports[i].transport; - unsigned int flags = 0; - - if (trans->flags&TRANS_ALIAS || trans->flags&TRANS_NOLISTEN) - continue; - - snprintf(buffer, sizeof(buffer), "%s/:%s", - trans->TransName, port ? port : ""); - - PRMSG (5,"MakeAllCOTSServerListeners: opening %s\n", - buffer, 0, 0); - - if ((ciptr = TRANS(OpenCOTSServer(buffer))) == NULL) - { - if (trans->flags & TRANS_DISABLED) - continue; - - PRMSG (1, - "MakeAllCOTSServerListeners: failed to open listener for %s\n", - trans->TransName, 0, 0); - continue; - } -#if defined(IPv6) && defined(AF_INET6) - if ((Xtransports[i].transport_id == TRANS_SOCKET_INET_INDEX - && ipv6_succ)) - flags |= ADDR_IN_USE_ALLOWED; -#endif - - if ((status = TRANS(CreateListener (ciptr, port, flags))) < 0) - { - if (status == TRANS_ADDR_IN_USE) - { - /* - * We failed to bind to the specified address because the - * address is in use. It must be that a server is already - * running at this address, and this function should fail. - */ - - PRMSG (1, - "MakeAllCOTSServerListeners: server already running\n", - 0, 0, 0); - - for (j = 0; j < *count_ret; j++) - TRANS(Close) (temp_ciptrs[j]); - - *count_ret = 0; - *ciptrs_ret = NULL; - *partial = 0; - return -1; - } - else - { - PRMSG (1, - "MakeAllCOTSServerListeners: failed to create listener for %s\n", - trans->TransName, 0, 0); - - continue; - } - } - -#if defined(IPv6) && defined(AF_INET6) - if (Xtransports[i].transport_id == TRANS_SOCKET_INET6_INDEX) - ipv6_succ = 1; -#endif - - PRMSG (5, - "MakeAllCOTSServerListeners: opened listener for %s, %d\n", - trans->TransName, ciptr->fd, 0); - - temp_ciptrs[*count_ret] = ciptr; - (*count_ret)++; - } - - *partial = (*count_ret < complete_network_count()); - - PRMSG (5, - "MakeAllCOTSServerListeners: partial=%d, actual=%d, complete=%d \n", - *partial, *count_ret, complete_network_count()); - - if (*count_ret > 0) - { - if ((*ciptrs_ret = (XtransConnInfo *) xalloc ( - *count_ret * sizeof (XtransConnInfo))) == NULL) - { - return -1; - } - - for (i = 0; i < *count_ret; i++) - { - (*ciptrs_ret)[i] = temp_ciptrs[i]; - } - } - else - *ciptrs_ret = NULL; - - return 0; -} - -int -TRANS(MakeAllCLTSServerListeners) (char *port, int *partial, int *count_ret, - XtransConnInfo **ciptrs_ret) - -{ - char buffer[256]; /* ??? What size ?? */ - XtransConnInfo ciptr, temp_ciptrs[NUMTRANS]; - int status, i, j; - - PRMSG (2,"MakeAllCLTSServerListeners(%s,%p)\n", - port ? port : "NULL", ciptrs_ret, 0); - - *count_ret = 0; - - for (i = 0; i < NUMTRANS; i++) - { - Xtransport *trans = Xtransports[i].transport; - - if (trans->flags&TRANS_ALIAS || trans->flags&TRANS_NOLISTEN) - continue; - - snprintf(buffer, sizeof(buffer), "%s/:%s", - trans->TransName, port ? port : ""); - - PRMSG (5,"MakeAllCLTSServerListeners: opening %s\n", - buffer, 0, 0); - - if ((ciptr = TRANS(OpenCLTSServer (buffer))) == NULL) - { - PRMSG (1, - "MakeAllCLTSServerListeners: failed to open listener for %s\n", - trans->TransName, 0, 0); - continue; - } - - if ((status = TRANS(CreateListener (ciptr, port, 0))) < 0) - { - if (status == TRANS_ADDR_IN_USE) - { - /* - * We failed to bind to the specified address because the - * address is in use. It must be that a server is already - * running at this address, and this function should fail. - */ - - PRMSG (1, - "MakeAllCLTSServerListeners: server already running\n", - 0, 0, 0); - - for (j = 0; j < *count_ret; j++) - TRANS(Close) (temp_ciptrs[j]); - - *count_ret = 0; - *ciptrs_ret = NULL; - *partial = 0; - return -1; - } - else - { - PRMSG (1, - "MakeAllCLTSServerListeners: failed to create listener for %s\n", - trans->TransName, 0, 0); - - continue; - } - } - - PRMSG (5, - "MakeAllCLTSServerListeners: opened listener for %s, %d\n", - trans->TransName, ciptr->fd, 0); - temp_ciptrs[*count_ret] = ciptr; - (*count_ret)++; - } - - *partial = (*count_ret < complete_network_count()); - - PRMSG (5, - "MakeAllCLTSServerListeners: partial=%d, actual=%d, complete=%d \n", - *partial, *count_ret, complete_network_count()); - - if (*count_ret > 0) - { - if ((*ciptrs_ret = (XtransConnInfo *) xalloc ( - *count_ret * sizeof (XtransConnInfo))) == NULL) - { - return -1; - } - - for (i = 0; i < *count_ret; i++) - { - (*ciptrs_ret)[i] = temp_ciptrs[i]; - } - } - else - *ciptrs_ret = NULL; - - return 0; -} - -#endif /* TRANS_SERVER */ - - - -/* - * These routines are not part of the X Transport Interface, but they - * may be used by it. - */ - - -#if defined(SYSV) && defined(__i386__) && !defined(__SCO__) && !defined(sun) || defined(WIN32) - -/* - * emulate readv - */ - -static int TRANS(ReadV) (XtransConnInfo ciptr, struct iovec *iov, int iovcnt) - -{ - int i, len, total; - char *base; - - ESET(0); - for (i = 0, total = 0; i < iovcnt; i++, iov++) { - len = iov->iov_len; - base = iov->iov_base; - while (len > 0) { - register int nbytes; - nbytes = TRANS(Read) (ciptr, base, len); - if (nbytes < 0 && total == 0) return -1; - if (nbytes <= 0) return total; - ESET(0); - len -= nbytes; - total += nbytes; - base += nbytes; - } - } - return total; -} - -#endif /* SYSV && __i386__ || WIN32 || __sxg__ */ - -#if defined(SYSV) && defined(__i386__) && !defined(__SCO__) && !defined(sun) || defined(WIN32) - -/* - * emulate writev - */ - -static int TRANS(WriteV) (XtransConnInfo ciptr, struct iovec *iov, int iovcnt) - -{ - int i, len, total; - char *base; - - ESET(0); - for (i = 0, total = 0; i < iovcnt; i++, iov++) { - len = iov->iov_len; - base = iov->iov_base; - while (len > 0) { - register int nbytes; - nbytes = TRANS(Write) (ciptr, base, len); - if (nbytes < 0 && total == 0) return -1; - if (nbytes <= 0) return total; - ESET(0); - len -= nbytes; - total += nbytes; - base += nbytes; - } - } - return total; -} - -#endif /* SYSV && __i386__ || WIN32 || __sxg__ */ - - -#if defined(_POSIX_SOURCE) || defined(USG) || defined(SVR4) || defined(__SVR4) || defined(__SCO__) -#ifndef NEED_UTSNAME -#define NEED_UTSNAME -#endif -#include <sys/utsname.h> -#endif - -/* - * TRANS(GetHostname) - similar to gethostname but allows special processing. - */ - -int TRANS(GetHostname) (char *buf, int maxlen) - -{ - int len; - -#ifdef NEED_UTSNAME - struct utsname name; - - uname (&name); - len = strlen (name.nodename); - if (len >= maxlen) len = maxlen - 1; - strncpy (buf, name.nodename, len); - buf[len] = '\0'; -#else - buf[0] = '\0'; - (void) gethostname (buf, maxlen); - buf [maxlen - 1] = '\0'; - len = strlen(buf); -#endif /* NEED_UTSNAME */ - return len; -} +/*
+
+Copyright 1993, 1994, 1998 The Open Group
+
+Permission to use, copy, modify, distribute, and sell this software and its
+documentation for any purpose is hereby granted without fee, provided that
+the above copyright notice appear in all copies and that both that
+copyright notice and this permission notice appear in supporting
+documentation.
+
+The above copyright notice and this permission notice shall be included
+in all copies or substantial portions of the Software.
+
+THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS
+OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.
+IN NO EVENT SHALL THE OPEN GROUP BE LIABLE FOR ANY CLAIM, DAMAGES OR
+OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
+ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+OTHER DEALINGS IN THE SOFTWARE.
+
+Except as contained in this notice, the name of The Open Group shall
+not be used in advertising or otherwise to promote the sale, use or
+other dealings in this Software without prior written authorization
+from The Open Group.
+
+ * Copyright 1993, 1994 NCR Corporation - Dayton, Ohio, USA
+ *
+ * All Rights Reserved
+ *
+ * Permission to use, copy, modify, and distribute this software and its
+ * documentation for any purpose and without fee is hereby granted, provided
+ * that the above copyright notice appear in all copies and that both that
+ * copyright notice and this permission notice appear in supporting
+ * documentation, and that the name NCR not be used in advertising
+ * or publicity pertaining to distribution of the software without specific,
+ * written prior permission. NCR makes no representations about the
+ * suitability of this software for any purpose. It is provided "as is"
+ * without express or implied warranty.
+ *
+ * NCR DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE,
+ * INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN
+ * NO EVENT SHALL NCR BE LIABLE FOR ANY SPECIAL, INDIRECT OR
+ * CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS
+ * OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT,
+ * NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN
+ * CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+
+#include <ctype.h>
+
+#ifdef _MSC_VER
+#include <X11\Xwinsock.h>
+#endif
+/*
+ * The transport table contains a definition for every transport (protocol)
+ * family. All operations that can be made on the transport go through this
+ * table.
+ *
+ * Each transport is assigned a unique transport id.
+ *
+ * New transports can be added by adding an entry in this table.
+ * For compatiblity, the transport ids should never be renumbered.
+ * Always add to the end of the list.
+ */
+
+#define TRANS_TLI_INET_INDEX 1
+#define TRANS_TLI_TCP_INDEX 2
+#define TRANS_TLI_TLI_INDEX 3
+#define TRANS_SOCKET_UNIX_INDEX 4
+#define TRANS_SOCKET_LOCAL_INDEX 5
+#define TRANS_SOCKET_INET_INDEX 6
+#define TRANS_SOCKET_TCP_INDEX 7
+#define TRANS_DNET_INDEX 8
+#define TRANS_LOCAL_LOCAL_INDEX 9
+#define TRANS_LOCAL_PTS_INDEX 10
+#define TRANS_LOCAL_NAMED_INDEX 11
+/* 12 used to be ISC, but that's gone. */
+#define TRANS_LOCAL_SCO_INDEX 13
+#define TRANS_SOCKET_INET6_INDEX 14
+#define TRANS_LOCAL_PIPE_INDEX 15
+
+
+static
+Xtransport_table Xtransports[] = {
+#if defined(STREAMSCONN)
+ { &TRANS(TLITCPFuncs), TRANS_TLI_TCP_INDEX },
+ { &TRANS(TLIINETFuncs), TRANS_TLI_INET_INDEX },
+ { &TRANS(TLITLIFuncs), TRANS_TLI_TLI_INDEX },
+#endif /* STREAMSCONN */
+#if defined(TCPCONN)
+ { &TRANS(SocketTCPFuncs), TRANS_SOCKET_TCP_INDEX },
+#if defined(IPv6) && defined(AF_INET6)
+ { &TRANS(SocketINET6Funcs), TRANS_SOCKET_INET6_INDEX },
+#endif /* IPv6 */
+ { &TRANS(SocketINETFuncs), TRANS_SOCKET_INET_INDEX },
+#endif /* TCPCONN */
+#if defined(UNIXCONN)
+#if !defined(LOCALCONN)
+ { &TRANS(SocketLocalFuncs), TRANS_SOCKET_LOCAL_INDEX },
+#endif /* !LOCALCONN */
+ { &TRANS(SocketUNIXFuncs), TRANS_SOCKET_UNIX_INDEX },
+#endif /* UNIXCONN */
+#if defined(LOCALCONN)
+ { &TRANS(LocalFuncs), TRANS_LOCAL_LOCAL_INDEX },
+#ifndef sun
+ { &TRANS(PTSFuncs), TRANS_LOCAL_PTS_INDEX },
+#endif /* sun */
+#if defined(SVR4) || defined(__SVR4)
+ { &TRANS(NAMEDFuncs), TRANS_LOCAL_NAMED_INDEX },
+#endif
+#ifdef sun
+ { &TRANS(PIPEFuncs), TRANS_LOCAL_PIPE_INDEX },
+#endif /* sun */
+#if defined(__SCO__) || defined(__UNIXWARE__)
+ { &TRANS(SCOFuncs), TRANS_LOCAL_SCO_INDEX },
+#endif /* __SCO__ || __UNIXWARE__ */
+#endif /* LOCALCONN */
+ { NULL, 0}
+};
+
+#define NUMTRANS (sizeof(Xtransports)/sizeof(Xtransport_table)-1)
+
+
+#ifdef WIN32
+#define ioctl ioctlsocket
+#endif
+
+
+
+/*
+ * These are a few utility function used by the public interface functions.
+ */
+
+void
+TRANS(FreeConnInfo) (XtransConnInfo ciptr)
+
+{
+ PRMSG (3,"FreeConnInfo(%p)\n", ciptr, 0, 0);
+
+ if (ciptr->addr)
+ xfree (ciptr->addr);
+
+ if (ciptr->peeraddr)
+ xfree (ciptr->peeraddr);
+
+ if (ciptr->port)
+ xfree (ciptr->port);
+
+ xfree ((char *) ciptr);
+}
+
+
+#define PROTOBUFSIZE 20
+
+static Xtransport *
+TRANS(SelectTransport) (char *protocol)
+
+{
+ char protobuf[PROTOBUFSIZE];
+ int i;
+
+ PRMSG (3,"SelectTransport(%s)\n", protocol, 0, 0);
+
+ /*
+ * Force Protocol to be lowercase as a way of doing
+ * a case insensitive match.
+ */
+
+ strncpy (protobuf, protocol, PROTOBUFSIZE - 1);
+ protobuf[PROTOBUFSIZE-1] = '\0';
+
+ for (i = 0; i < PROTOBUFSIZE && protobuf[i] != '\0'; i++)
+ if (isupper (protobuf[i]))
+ protobuf[i] = tolower (protobuf[i]);
+
+ /* Look at all of the configured protocols */
+
+ for (i = 0; i < NUMTRANS; i++)
+ {
+ if (!strcmp (protobuf, Xtransports[i].transport->TransName))
+ return Xtransports[i].transport;
+ }
+
+ return NULL;
+}
+
+#ifndef TEST_t
+static
+#endif /* TEST_t */
+int
+TRANS(ParseAddress) (char *address, char **protocol, char **host, char **port)
+
+{
+ /*
+ * For the font library, the address is a string formatted
+ * as "protocol/host:port[/catalogue]". Note that the catologue
+ * is optional. At this time, the catologue info is ignored, but
+ * we have to parse it anyways.
+ *
+ * Other than fontlib, the address is a string formatted
+ * as "protocol/host:port".
+ *
+ * If the protocol part is missing, then assume TCP.
+ * If the protocol part and host part are missing, then assume local.
+ * If a "::" is found then assume DNET.
+ */
+
+ char *mybuf, *tmpptr;
+ char *_protocol, *_host, *_port;
+ char hostnamebuf[256];
+ int _host_len;
+
+ PRMSG (3,"ParseAddress(%s)\n", address, 0, 0);
+
+ /* Copy the string so it can be changed */
+
+ tmpptr = mybuf = (char *) xalloc (strlen (address) + 1);
+ strcpy (mybuf, address);
+
+ /* Parse the string to get each component */
+
+ /* Get the protocol part */
+
+ _protocol = mybuf;
+
+
+ if ( ((mybuf = strchr (mybuf,'/')) == NULL) &&
+ ((mybuf = strrchr (tmpptr,':')) == NULL) )
+ {
+ /* address is in a bad format */
+ *protocol = NULL;
+ *host = NULL;
+ *port = NULL;
+ xfree (tmpptr);
+ return 0;
+ }
+
+ if (*mybuf == ':')
+ {
+ /*
+ * If there is a hostname, then assume tcp, otherwise
+ * it must be local.
+ */
+ if (mybuf == tmpptr)
+ {
+ /* There is neither a protocol or host specified */
+ _protocol = "local";
+ }
+ else
+ {
+ /* There is a hostname specified */
+ _protocol = "tcp";
+ mybuf = tmpptr; /* reset to the begining of the host ptr */
+ }
+ }
+ else
+ {
+ /* *mybuf == '/' */
+
+ *mybuf ++= '\0'; /* put a null at the end of the protocol */
+
+ if (strlen(_protocol) == 0)
+ {
+ /*
+ * If there is a hostname, then assume tcp, otherwise
+ * it must be local.
+ */
+ if (*mybuf != ':')
+ _protocol = "tcp";
+ else
+ _protocol = "local";
+ }
+ }
+
+ /* Get the host part */
+
+ _host = mybuf;
+
+ if ((mybuf = strrchr (mybuf,':')) == NULL)
+ {
+ *protocol = NULL;
+ *host = NULL;
+ *port = NULL;
+ xfree (tmpptr);
+ return 0;
+ }
+
+ *mybuf ++= '\0';
+
+ _host_len = strlen(_host);
+ if (_host_len == 0)
+ {
+ TRANS(GetHostname) (hostnamebuf, sizeof (hostnamebuf));
+ _host = hostnamebuf;
+ }
+#if defined(IPv6) && defined(AF_INET6)
+ /* hostname in IPv6 [numeric_addr]:0 form? */
+ else if ( (_host_len > 3) &&
+ ((strcmp(_protocol, "tcp") == 0) || (strcmp(_protocol, "inet6") == 0))
+ && (*_host == '[') && (*(_host + _host_len - 1) == ']') ) {
+ struct sockaddr_in6 sin6;
+
+ *(_host + _host_len - 1) = '\0';
+
+ /* Verify address is valid IPv6 numeric form */
+ if (inet_pton(AF_INET6, _host + 1, &sin6) == 1) {
+ /* It is. Use it as such. */
+ _host++;
+ _protocol = "inet6";
+ } else {
+ /* It's not, restore it just in case some other code can use it. */
+ *(_host + _host_len - 1) = ']';
+ }
+ }
+#endif
+
+
+ /* Get the port */
+
+ _port = mybuf;
+
+#if defined(FONT_t) || defined(FS_t)
+ /*
+ * Is there an optional catalogue list?
+ */
+
+ if ((mybuf = strchr (mybuf,'/')) != NULL)
+ *mybuf ++= '\0';
+
+ /*
+ * The rest, if any, is the (currently unused) catalogue list.
+ *
+ * _catalogue = mybuf;
+ */
+#endif
+
+#ifdef HAVE_LAUNCHD
+ /* launchd sockets will look like 'local//tmp/launch-XgkNns/:0' */
+ if(address != NULL && strlen(address)>8 && (!strncmp(address,"local//",7))) {
+ _protocol="local";
+ _host="";
+ _port=address+6;
+ }
+#endif
+
+ /*
+ * Now that we have all of the components, allocate new
+ * string space for them.
+ */
+
+ if ((*protocol = (char *) xalloc(strlen (_protocol) + 1)) == NULL)
+ {
+ /* Malloc failed */
+ *port = NULL;
+ *host = NULL;
+ *protocol = NULL;
+ xfree (tmpptr);
+ return 0;
+ }
+ else
+ strcpy (*protocol, _protocol);
+
+ if ((*host = (char *) xalloc (strlen (_host) + 1)) == NULL)
+ {
+ /* Malloc failed */
+ *port = NULL;
+ *host = NULL;
+ xfree (*protocol);
+ *protocol = NULL;
+ xfree (tmpptr);
+ return 0;
+ }
+ else
+ strcpy (*host, _host);
+
+ if ((*port = (char *) xalloc (strlen (_port) + 1)) == NULL)
+ {
+ /* Malloc failed */
+ *port = NULL;
+ xfree (*host);
+ *host = NULL;
+ xfree (*protocol);
+ *protocol = NULL;
+ xfree (tmpptr);
+ return 0;
+ }
+ else
+ strcpy (*port, _port);
+
+ xfree (tmpptr);
+
+ return 1;
+}
+
+
+/*
+ * TRANS(Open) does all of the real work opening a connection. The only
+ * funny part about this is the type parameter which is used to decide which
+ * type of open to perform.
+ */
+
+static XtransConnInfo
+TRANS(Open) (int type, char *address)
+
+{
+ char *protocol = NULL, *host = NULL, *port = NULL;
+ XtransConnInfo ciptr = NULL;
+ Xtransport *thistrans;
+
+ PRMSG (2,"Open(%d,%s)\n", type, address, 0);
+
+#if defined(WIN32) && defined(TCPCONN)
+ if (TRANS(WSAStartup)())
+ {
+ PRMSG (1,"Open: WSAStartup failed\n", 0, 0, 0);
+ return NULL;
+ }
+#endif
+
+ /* Parse the Address */
+
+ if (TRANS(ParseAddress) (address, &protocol, &host, &port) == 0)
+ {
+ PRMSG (1,"Open: Unable to Parse address %s\n", address, 0, 0);
+ return NULL;
+ }
+
+ /* Determine the transport type */
+
+ if ((thistrans = TRANS(SelectTransport) (protocol)) == NULL)
+ {
+ PRMSG (1,"Open: Unable to find transport for %s\n",
+ protocol, 0, 0);
+
+ xfree (protocol);
+ xfree (host);
+ xfree (port);
+ return NULL;
+ }
+
+ /* Open the transport */
+
+ switch (type)
+ {
+ case XTRANS_OPEN_COTS_CLIENT:
+#ifdef TRANS_CLIENT
+ ciptr = thistrans->OpenCOTSClient(thistrans, protocol, host, port);
+#endif /* TRANS_CLIENT */
+ break;
+ case XTRANS_OPEN_COTS_SERVER:
+#ifdef TRANS_SERVER
+ ciptr = thistrans->OpenCOTSServer(thistrans, protocol, host, port);
+#endif /* TRANS_SERVER */
+ break;
+ case XTRANS_OPEN_CLTS_CLIENT:
+#ifdef TRANS_CLIENT
+ ciptr = thistrans->OpenCLTSClient(thistrans, protocol, host, port);
+#endif /* TRANS_CLIENT */
+ break;
+ case XTRANS_OPEN_CLTS_SERVER:
+#ifdef TRANS_SERVER
+ ciptr = thistrans->OpenCLTSServer(thistrans, protocol, host, port);
+#endif /* TRANS_SERVER */
+ break;
+ default:
+ PRMSG (1,"Open: Unknown Open type %d\n", type, 0, 0);
+ }
+
+ if (ciptr == NULL)
+ {
+ if (!(thistrans->flags & TRANS_DISABLED))
+ {
+ PRMSG (1,"Open: transport open failed for %s/%s:%s\n",
+ protocol, host, port);
+ }
+ xfree (protocol);
+ xfree (host);
+ xfree (port);
+ return NULL;
+ }
+
+ ciptr->transptr = thistrans;
+ ciptr->port = port; /* We need this for TRANS(Reopen) */
+
+ xfree (protocol);
+ xfree (host);
+
+ return ciptr;
+}
+
+
+#ifdef TRANS_REOPEN
+
+/*
+ * We might want to create an XtransConnInfo object based on a previously
+ * opened connection. For example, the font server may clone itself and
+ * pass file descriptors to the parent.
+ */
+
+static XtransConnInfo
+TRANS(Reopen) (int type, int trans_id, int fd, char *port)
+
+{
+ XtransConnInfo ciptr = NULL;
+ Xtransport *thistrans = NULL;
+ char *save_port;
+ int i;
+
+ PRMSG (2,"Reopen(%d,%d,%s)\n", trans_id, fd, port);
+
+ /* Determine the transport type */
+
+ for (i = 0; i < NUMTRANS; i++)
+ if (Xtransports[i].transport_id == trans_id)
+ {
+ thistrans = Xtransports[i].transport;
+ break;
+ }
+
+ if (thistrans == NULL)
+ {
+ PRMSG (1,"Reopen: Unable to find transport id %d\n",
+ trans_id, 0, 0);
+
+ return NULL;
+ }
+
+ if ((save_port = (char *) xalloc (strlen (port) + 1)) == NULL)
+ {
+ PRMSG (1,"Reopen: Unable to malloc port string\n", 0, 0, 0);
+
+ return NULL;
+ }
+
+ strcpy (save_port, port);
+
+ /* Get a new XtransConnInfo object */
+
+ switch (type)
+ {
+ case XTRANS_OPEN_COTS_SERVER:
+ ciptr = thistrans->ReopenCOTSServer(thistrans, fd, port);
+ break;
+ case XTRANS_OPEN_CLTS_SERVER:
+ ciptr = thistrans->ReopenCLTSServer(thistrans, fd, port);
+ break;
+ default:
+ PRMSG (1,"Reopen: Bad Open type %d\n", type, 0, 0);
+ }
+
+ if (ciptr == NULL)
+ {
+ PRMSG (1,"Reopen: transport open failed\n", 0, 0, 0);
+ return NULL;
+ }
+
+ ciptr->transptr = thistrans;
+ ciptr->port = save_port;
+
+ return ciptr;
+}
+
+#endif /* TRANS_REOPEN */
+
+
+
+/*
+ * These are the public interfaces to this Transport interface.
+ * These are the only functions that should have knowledge of the transport
+ * table.
+ */
+
+#ifdef TRANS_CLIENT
+
+XtransConnInfo
+TRANS(OpenCOTSClient) (char *address)
+
+{
+ PRMSG (2,"OpenCOTSClient(%s)\n", address, 0, 0);
+ return TRANS(Open) (XTRANS_OPEN_COTS_CLIENT, address);
+}
+
+#endif /* TRANS_CLIENT */
+
+
+#ifdef TRANS_SERVER
+
+XtransConnInfo
+TRANS(OpenCOTSServer) (char *address)
+
+{
+ PRMSG (2,"OpenCOTSServer(%s)\n", address, 0, 0);
+ return TRANS(Open) (XTRANS_OPEN_COTS_SERVER, address);
+}
+
+#endif /* TRANS_SERVER */
+
+
+#ifdef TRANS_CLIENT
+
+XtransConnInfo
+TRANS(OpenCLTSClient) (char *address)
+
+{
+ PRMSG (2,"OpenCLTSClient(%s)\n", address, 0, 0);
+ return TRANS(Open) (XTRANS_OPEN_CLTS_CLIENT, address);
+}
+
+#endif /* TRANS_CLIENT */
+
+
+#ifdef TRANS_SERVER
+
+XtransConnInfo
+TRANS(OpenCLTSServer) (char *address)
+
+{
+ PRMSG (2,"OpenCLTSServer(%s)\n", address, 0, 0);
+ return TRANS(Open) (XTRANS_OPEN_CLTS_SERVER, address);
+}
+
+#endif /* TRANS_SERVER */
+
+
+#ifdef TRANS_REOPEN
+
+XtransConnInfo
+TRANS(ReopenCOTSServer) (int trans_id, int fd, char *port)
+
+{
+ PRMSG (2,"ReopenCOTSServer(%d, %d, %s)\n", trans_id, fd, port);
+ return TRANS(Reopen) (XTRANS_OPEN_COTS_SERVER, trans_id, fd, port);
+}
+
+XtransConnInfo
+TRANS(ReopenCLTSServer) (int trans_id, int fd, char *port)
+
+{
+ PRMSG (2,"ReopenCLTSServer(%d, %d, %s)\n", trans_id, fd, port);
+ return TRANS(Reopen) (XTRANS_OPEN_CLTS_SERVER, trans_id, fd, port);
+}
+
+
+int
+TRANS(GetReopenInfo) (XtransConnInfo ciptr,
+ int *trans_id, int *fd, char **port)
+
+{
+ int i;
+
+ for (i = 0; i < NUMTRANS; i++)
+ if (Xtransports[i].transport == ciptr->transptr)
+ {
+ *trans_id = Xtransports[i].transport_id;
+ *fd = ciptr->fd;
+
+ if ((*port = (char *) xalloc (strlen (ciptr->port) + 1)) == NULL)
+ return 0;
+ else
+ {
+ strcpy (*port, ciptr->port);
+ return 1;
+ }
+ }
+
+ return 0;
+}
+
+#endif /* TRANS_REOPEN */
+
+
+int
+TRANS(SetOption) (XtransConnInfo ciptr, int option, int arg)
+
+{
+ int fd = ciptr->fd;
+ int ret = 0;
+
+ PRMSG (2,"SetOption(%d,%d,%d)\n", fd, option, arg);
+
+ /*
+ * For now, all transport type use the same stuff for setting options.
+ * As long as this is true, we can put the common code here. Once a more
+ * complicated transport such as shared memory or an OSI implementation
+ * that uses the session and application libraries is implemented, this
+ * code may have to move to a transport dependent function.
+ *
+ * ret = ciptr->transptr->SetOption (ciptr, option, arg);
+ */
+
+ switch (option)
+ {
+ case TRANS_NONBLOCKING:
+ switch (arg)
+ {
+ case 0:
+ /* Set to blocking mode */
+ break;
+ case 1: /* Set to non-blocking mode */
+
+#if defined(O_NONBLOCK) && !defined(SCO325)
+ ret = fcntl (fd, F_GETFL, 0);
+ if (ret != -1)
+ ret = fcntl (fd, F_SETFL, ret | O_NONBLOCK);
+#else
+#ifdef FIOSNBIO
+ {
+ int arg;
+ arg = 1;
+ ret = ioctl (fd, FIOSNBIO, &arg);
+ }
+#else
+#if defined(WIN32)
+ {
+#ifdef WIN32
+ unsigned long arg;
+#else
+ int arg;
+#endif
+ arg = 1;
+/* IBM TCP/IP understands this option too well: it causes TRANS(Read) to fail
+ * eventually with EWOULDBLOCK */
+ ret = ioctl (fd, FIONBIO, &arg);
+ }
+#else
+ ret = fcntl (fd, F_GETFL, 0);
+#ifdef FNDELAY
+ ret = fcntl (fd, F_SETFL, ret | FNDELAY);
+#else
+ ret = fcntl (fd, F_SETFL, ret | O_NDELAY);
+#endif
+#endif /* AIXV3 || uniosu */
+#endif /* FIOSNBIO */
+#endif /* O_NONBLOCK */
+ break;
+ default:
+ /* Unknown option */
+ break;
+ }
+ break;
+ case TRANS_CLOSEONEXEC:
+#ifdef F_SETFD
+#ifdef FD_CLOEXEC
+ ret = fcntl (fd, F_SETFD, FD_CLOEXEC);
+#else
+ ret = fcntl (fd, F_SETFD, 1);
+#endif /* FD_CLOEXEC */
+#endif /* F_SETFD */
+ break;
+ }
+
+ return ret;
+}
+
+#ifdef TRANS_SERVER
+
+int
+TRANS(CreateListener) (XtransConnInfo ciptr, char *port, unsigned int flags)
+
+{
+ return ciptr->transptr->CreateListener (ciptr, port, flags);
+}
+
+int
+TRANS(NoListen) (char * protocol)
+
+{
+ Xtransport *trans;
+ int i = 0, ret = 0;
+
+ if ((trans = TRANS(SelectTransport)(protocol)) == NULL)
+ {
+ PRMSG (1,"TransNoListen: unable to find transport: %s\n",
+ protocol, 0, 0);
+
+ return -1;
+ }
+ if (trans->flags & TRANS_ALIAS) {
+ if (trans->nolisten)
+ while (trans->nolisten[i]) {
+ ret |= TRANS(NoListen)(trans->nolisten[i]);
+ i++;
+ }
+ }
+
+ trans->flags |= TRANS_NOLISTEN;
+ return ret;
+}
+
+int
+TRANS(ResetListener) (XtransConnInfo ciptr)
+
+{
+ if (ciptr->transptr->ResetListener)
+ return ciptr->transptr->ResetListener (ciptr);
+ else
+ return TRANS_RESET_NOOP;
+}
+
+
+XtransConnInfo
+TRANS(Accept) (XtransConnInfo ciptr, int *status)
+
+{
+ XtransConnInfo newciptr;
+
+ PRMSG (2,"Accept(%d)\n", ciptr->fd, 0, 0);
+
+ newciptr = ciptr->transptr->Accept (ciptr, status);
+
+ if (newciptr)
+ newciptr->transptr = ciptr->transptr;
+
+ return newciptr;
+}
+
+#endif /* TRANS_SERVER */
+
+
+#ifdef TRANS_CLIENT
+
+int
+TRANS(Connect) (XtransConnInfo ciptr, char *address)
+
+{
+ char *protocol;
+ char *host;
+ char *port;
+ int ret;
+
+ PRMSG (2,"Connect(%d,%s)\n", ciptr->fd, address, 0);
+
+ if (TRANS(ParseAddress) (address, &protocol, &host, &port) == 0)
+ {
+ PRMSG (1,"Connect: Unable to Parse address %s\n",
+ address, 0, 0);
+ return -1;
+ }
+
+#ifdef HAVE_LAUNCHD
+ if (!host) host=strdup("");
+#endif
+
+ if (!port || !*port)
+ {
+ PRMSG (1,"Connect: Missing port specification in %s\n",
+ address, 0, 0);
+ if (protocol) xfree (protocol);
+ if (host) xfree (host);
+ return -1;
+ }
+
+ ret = ciptr->transptr->Connect (ciptr, host, port);
+
+ if (protocol) xfree (protocol);
+ if (host) xfree (host);
+ if (port) xfree (port);
+
+ return ret;
+}
+
+#endif /* TRANS_CLIENT */
+
+
+int
+TRANS(BytesReadable) (XtransConnInfo ciptr, BytesReadable_t *pend)
+
+{
+ return ciptr->transptr->BytesReadable (ciptr, pend);
+}
+
+int
+TRANS(Read) (XtransConnInfo ciptr, char *buf, int size)
+
+{
+ return ciptr->transptr->Read (ciptr, buf, size);
+}
+
+int
+TRANS(Write) (XtransConnInfo ciptr, char *buf, int size)
+
+{
+ return ciptr->transptr->Write (ciptr, buf, size);
+}
+
+int
+TRANS(Readv) (XtransConnInfo ciptr, struct iovec *buf, int size)
+
+{
+ return ciptr->transptr->Readv (ciptr, buf, size);
+}
+
+int
+TRANS(Writev) (XtransConnInfo ciptr, struct iovec *buf, int size)
+
+{
+ return ciptr->transptr->Writev (ciptr, buf, size);
+}
+
+int
+TRANS(Disconnect) (XtransConnInfo ciptr)
+
+{
+ return ciptr->transptr->Disconnect (ciptr);
+}
+
+int
+TRANS(Close) (XtransConnInfo ciptr)
+
+{
+ int ret;
+
+ PRMSG (2,"Close(%d)\n", ciptr->fd, 0, 0);
+
+ ret = ciptr->transptr->Close (ciptr);
+
+ TRANS(FreeConnInfo) (ciptr);
+
+ return ret;
+}
+
+int
+TRANS(CloseForCloning) (XtransConnInfo ciptr)
+
+{
+ int ret;
+
+ PRMSG (2,"CloseForCloning(%d)\n", ciptr->fd, 0, 0);
+
+ ret = ciptr->transptr->CloseForCloning (ciptr);
+
+ TRANS(FreeConnInfo) (ciptr);
+
+ return ret;
+}
+
+int
+TRANS(IsLocal) (XtransConnInfo ciptr)
+
+{
+ return (ciptr->family == AF_UNIX);
+}
+
+
+int
+TRANS(GetMyAddr) (XtransConnInfo ciptr, int *familyp, int *addrlenp,
+ Xtransaddr **addrp)
+
+{
+ PRMSG (2,"GetMyAddr(%d)\n", ciptr->fd, 0, 0);
+
+ *familyp = ciptr->family;
+ *addrlenp = ciptr->addrlen;
+
+ if ((*addrp = (Xtransaddr *) xalloc (ciptr->addrlen)) == NULL)
+ {
+ PRMSG (1,"GetMyAddr: malloc failed\n", 0, 0, 0);
+ return -1;
+ }
+ memcpy(*addrp, ciptr->addr, ciptr->addrlen);
+
+ return 0;
+}
+
+int
+TRANS(GetPeerAddr) (XtransConnInfo ciptr, int *familyp, int *addrlenp,
+ Xtransaddr **addrp)
+
+{
+ PRMSG (2,"GetPeerAddr(%d)\n", ciptr->fd, 0, 0);
+
+ *familyp = ciptr->family;
+ *addrlenp = ciptr->peeraddrlen;
+
+ if ((*addrp = (Xtransaddr *) xalloc (ciptr->peeraddrlen)) == NULL)
+ {
+ PRMSG (1,"GetPeerAddr: malloc failed\n", 0, 0, 0);
+ return -1;
+ }
+ memcpy(*addrp, ciptr->peeraddr, ciptr->peeraddrlen);
+
+ return 0;
+}
+
+
+int
+TRANS(GetConnectionNumber) (XtransConnInfo ciptr)
+
+{
+ return ciptr->fd;
+}
+
+
+/*
+ * These functions are really utility functions, but they require knowledge
+ * of the internal data structures, so they have to be part of the Transport
+ * Independant API.
+ */
+
+#ifdef TRANS_SERVER
+
+static int
+complete_network_count (void)
+
+{
+ int count = 0;
+ int found_local = 0;
+ int i;
+
+ /*
+ * For a complete network, we only need one LOCALCONN transport to work
+ */
+
+ for (i = 0; i < NUMTRANS; i++)
+ {
+ if (Xtransports[i].transport->flags & TRANS_ALIAS
+ || Xtransports[i].transport->flags & TRANS_NOLISTEN)
+ continue;
+
+ if (Xtransports[i].transport->flags & TRANS_LOCAL)
+ found_local = 1;
+ else
+ count++;
+ }
+
+ return (count + found_local);
+}
+
+
+#ifdef XQUARTZ_EXPORTS_LAUNCHD_FD
+extern int xquartz_launchd_fd;
+#endif
+
+int
+TRANS(MakeAllCOTSServerListeners) (char *port, int *partial, int *count_ret,
+ XtransConnInfo **ciptrs_ret)
+
+{
+ char buffer[256]; /* ??? What size ?? */
+ XtransConnInfo ciptr, temp_ciptrs[NUMTRANS];
+ int status, i, j;
+
+#if defined(IPv6) && defined(AF_INET6)
+ int ipv6_succ = 0;
+#endif
+ PRMSG (2,"MakeAllCOTSServerListeners(%s,%p)\n",
+ port ? port : "NULL", ciptrs_ret, 0);
+
+ *count_ret = 0;
+
+#ifdef XQUARTZ_EXPORTS_LAUNCHD_FD
+ fprintf(stderr, "Launchd socket fd: %d\n", xquartz_launchd_fd);
+ if(xquartz_launchd_fd != -1) {
+ if((ciptr = TRANS(ReopenCOTSServer(TRANS_SOCKET_LOCAL_INDEX,
+ xquartz_launchd_fd, getenv("DISPLAY"))))==NULL)
+ fprintf(stderr,"Got NULL while trying to Reopen launchd port\n");
+ else
+ temp_ciptrs[(*count_ret)++] = ciptr;
+ }
+#endif
+
+ for (i = 0; i < NUMTRANS; i++)
+ {
+ Xtransport *trans = Xtransports[i].transport;
+ unsigned int flags = 0;
+
+ if (trans->flags&TRANS_ALIAS || trans->flags&TRANS_NOLISTEN)
+ continue;
+
+ snprintf(buffer, sizeof(buffer), "%s/:%s",
+ trans->TransName, port ? port : "");
+
+ PRMSG (5,"MakeAllCOTSServerListeners: opening %s\n",
+ buffer, 0, 0);
+
+ if ((ciptr = TRANS(OpenCOTSServer(buffer))) == NULL)
+ {
+ if (trans->flags & TRANS_DISABLED)
+ continue;
+
+ PRMSG (1,
+ "MakeAllCOTSServerListeners: failed to open listener for %s\n",
+ trans->TransName, 0, 0);
+ continue;
+ }
+#if defined(IPv6) && defined(AF_INET6)
+ if ((Xtransports[i].transport_id == TRANS_SOCKET_INET_INDEX
+ && ipv6_succ))
+ flags |= ADDR_IN_USE_ALLOWED;
+#endif
+
+ if ((status = TRANS(CreateListener (ciptr, port, flags))) < 0)
+ {
+ if (status == TRANS_ADDR_IN_USE)
+ {
+ /*
+ * We failed to bind to the specified address because the
+ * address is in use. It must be that a server is already
+ * running at this address, and this function should fail.
+ */
+
+ PRMSG (1,
+ "MakeAllCOTSServerListeners: server already running\n",
+ 0, 0, 0);
+
+ for (j = 0; j < *count_ret; j++)
+ TRANS(Close) (temp_ciptrs[j]);
+
+ *count_ret = 0;
+ *ciptrs_ret = NULL;
+ *partial = 0;
+ return -1;
+ }
+ else
+ {
+ PRMSG (1,
+ "MakeAllCOTSServerListeners: failed to create listener for %s\n",
+ trans->TransName, 0, 0);
+
+ continue;
+ }
+ }
+
+#if defined(IPv6) && defined(AF_INET6)
+ if (Xtransports[i].transport_id == TRANS_SOCKET_INET6_INDEX)
+ ipv6_succ = 1;
+#endif
+
+ PRMSG (5,
+ "MakeAllCOTSServerListeners: opened listener for %s, %d\n",
+ trans->TransName, ciptr->fd, 0);
+
+ temp_ciptrs[*count_ret] = ciptr;
+ (*count_ret)++;
+ }
+
+ *partial = (*count_ret < complete_network_count());
+
+ PRMSG (5,
+ "MakeAllCOTSServerListeners: partial=%d, actual=%d, complete=%d \n",
+ *partial, *count_ret, complete_network_count());
+
+ if (*count_ret > 0)
+ {
+ if ((*ciptrs_ret = (XtransConnInfo *) xalloc (
+ *count_ret * sizeof (XtransConnInfo))) == NULL)
+ {
+ return -1;
+ }
+
+ for (i = 0; i < *count_ret; i++)
+ {
+ (*ciptrs_ret)[i] = temp_ciptrs[i];
+ }
+ }
+ else
+ *ciptrs_ret = NULL;
+
+ return 0;
+}
+
+int
+TRANS(MakeAllCLTSServerListeners) (char *port, int *partial, int *count_ret,
+ XtransConnInfo **ciptrs_ret)
+
+{
+ char buffer[256]; /* ??? What size ?? */
+ XtransConnInfo ciptr, temp_ciptrs[NUMTRANS];
+ int status, i, j;
+
+ PRMSG (2,"MakeAllCLTSServerListeners(%s,%p)\n",
+ port ? port : "NULL", ciptrs_ret, 0);
+
+ *count_ret = 0;
+
+ for (i = 0; i < NUMTRANS; i++)
+ {
+ Xtransport *trans = Xtransports[i].transport;
+
+ if (trans->flags&TRANS_ALIAS || trans->flags&TRANS_NOLISTEN)
+ continue;
+
+ snprintf(buffer, sizeof(buffer), "%s/:%s",
+ trans->TransName, port ? port : "");
+
+ PRMSG (5,"MakeAllCLTSServerListeners: opening %s\n",
+ buffer, 0, 0);
+
+ if ((ciptr = TRANS(OpenCLTSServer (buffer))) == NULL)
+ {
+ PRMSG (1,
+ "MakeAllCLTSServerListeners: failed to open listener for %s\n",
+ trans->TransName, 0, 0);
+ continue;
+ }
+
+ if ((status = TRANS(CreateListener (ciptr, port, 0))) < 0)
+ {
+ if (status == TRANS_ADDR_IN_USE)
+ {
+ /*
+ * We failed to bind to the specified address because the
+ * address is in use. It must be that a server is already
+ * running at this address, and this function should fail.
+ */
+
+ PRMSG (1,
+ "MakeAllCLTSServerListeners: server already running\n",
+ 0, 0, 0);
+
+ for (j = 0; j < *count_ret; j++)
+ TRANS(Close) (temp_ciptrs[j]);
+
+ *count_ret = 0;
+ *ciptrs_ret = NULL;
+ *partial = 0;
+ return -1;
+ }
+ else
+ {
+ PRMSG (1,
+ "MakeAllCLTSServerListeners: failed to create listener for %s\n",
+ trans->TransName, 0, 0);
+
+ continue;
+ }
+ }
+
+ PRMSG (5,
+ "MakeAllCLTSServerListeners: opened listener for %s, %d\n",
+ trans->TransName, ciptr->fd, 0);
+ temp_ciptrs[*count_ret] = ciptr;
+ (*count_ret)++;
+ }
+
+ *partial = (*count_ret < complete_network_count());
+
+ PRMSG (5,
+ "MakeAllCLTSServerListeners: partial=%d, actual=%d, complete=%d \n",
+ *partial, *count_ret, complete_network_count());
+
+ if (*count_ret > 0)
+ {
+ if ((*ciptrs_ret = (XtransConnInfo *) xalloc (
+ *count_ret * sizeof (XtransConnInfo))) == NULL)
+ {
+ return -1;
+ }
+
+ for (i = 0; i < *count_ret; i++)
+ {
+ (*ciptrs_ret)[i] = temp_ciptrs[i];
+ }
+ }
+ else
+ *ciptrs_ret = NULL;
+
+ return 0;
+}
+
+#endif /* TRANS_SERVER */
+
+
+
+/*
+ * These routines are not part of the X Transport Interface, but they
+ * may be used by it.
+ */
+
+
+#if defined(SYSV) && defined(__i386__) && !defined(__SCO__) && !defined(sun) || defined(WIN32)
+
+/*
+ * emulate readv
+ */
+
+static int TRANS(ReadV) (XtransConnInfo ciptr, struct iovec *iov, int iovcnt)
+
+{
+ int i, len, total;
+ char *base;
+
+ ESET(0);
+ for (i = 0, total = 0; i < iovcnt; i++, iov++) {
+ len = iov->iov_len;
+ base = iov->iov_base;
+ while (len > 0) {
+ register int nbytes;
+ nbytes = TRANS(Read) (ciptr, base, len);
+ if (nbytes < 0 && total == 0) return -1;
+ if (nbytes <= 0) return total;
+ ESET(0);
+ len -= nbytes;
+ total += nbytes;
+ base += nbytes;
+ }
+ }
+ return total;
+}
+
+#endif /* SYSV && __i386__ || WIN32 || __sxg__ */
+
+#if defined(SYSV) && defined(__i386__) && !defined(__SCO__) && !defined(sun) || defined(WIN32)
+
+/*
+ * emulate writev
+ */
+
+static int TRANS(WriteV) (XtransConnInfo ciptr, struct iovec *iov, int iovcnt)
+
+{
+ int i, len, total;
+ char *base;
+
+ ESET(0);
+ for (i = 0, total = 0; i < iovcnt; i++, iov++) {
+ len = iov->iov_len;
+ base = iov->iov_base;
+ while (len > 0) {
+ register int nbytes;
+ nbytes = TRANS(Write) (ciptr, base, len);
+ if (nbytes < 0 && total == 0) return -1;
+ if (nbytes <= 0) return total;
+ ESET(0);
+ len -= nbytes;
+ total += nbytes;
+ base += nbytes;
+ }
+ }
+ return total;
+}
+
+#endif /* SYSV && __i386__ || WIN32 || __sxg__ */
+
+
+#if defined(_POSIX_SOURCE) || defined(USG) || defined(SVR4) || defined(__SVR4) || defined(__SCO__)
+#ifndef NEED_UTSNAME
+#define NEED_UTSNAME
+#endif
+#include <sys/utsname.h>
+#endif
+
+/*
+ * TRANS(GetHostname) - similar to gethostname but allows special processing.
+ */
+
+int TRANS(GetHostname) (char *buf, int maxlen)
+
+{
+ int len;
+
+#ifdef NEED_UTSNAME
+ struct utsname name;
+
+ uname (&name);
+ len = strlen (name.nodename);
+ if (len >= maxlen) len = maxlen - 1;
+ strncpy (buf, name.nodename, len);
+ buf[len] = '\0';
+#else
+ buf[0] = '\0';
+ (void) gethostname (buf, maxlen);
+ buf [maxlen - 1] = '\0';
+ len = strlen(buf);
+#endif /* NEED_UTSNAME */
+ return len;
+}
|