diff options
Diffstat (limited to 'X11')
| -rw-r--r-- | X11/extensions/XIproto.txt | 2542 | ||||
| -rw-r--r-- | X11/extensions/compositeproto.h | 2 |
2 files changed, 2544 insertions, 0 deletions
diff --git a/X11/extensions/XIproto.txt b/X11/extensions/XIproto.txt new file mode 100644 index 000000000..20cc02a03 --- /dev/null +++ b/X11/extensions/XIproto.txt @@ -0,0 +1,2542 @@ + X11 Input Extension Protocol Specification + Version 1.0 + X Consortium Standard + X Version 11, Release 6.8 + Mark Patrick, Ardent Computer + George Sachs, Hewlett-Packard + + Version 1.5 + Peter Hutterer + + Copyright © 1989, 1990, 1991 by Hewlett-Packard Company and + Ardent Computer + + Permission to use, copy, modify, and distribute this + documentation for any purpose and without fee is hereby + granted, provided that the above copyright notice and this + permission notice appear in all copies. Ardent and + Hewlett-Packard make no representations about the suitability + for any purpose of the information in this document. It is + provided "as is" without express or implied warranty. Copyright + © 1989, 1990, 1991, 1992 X Consortium + + Permission is hereby granted, free of charge, to any person + obtaining a copy of this software and associated documentation + files (the “Software”), to deal in the Software without + restriction, including without limitation the rights to use, + copy, modify, merge, publish, distribute, sublicense, and/or + sell copies of the Software, and to permit persons to whom the + Software is furnished to do so, subject to the following + conditions: + + The above copyright notice and this permission notice shall be + included in all copies or substantial portions of the Software. + + THE SOFTWARE IS PROVIDED “AS IS”, WITHOUT WARRANTY OF ANY KIND, + EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + NONINFRINGEMENT. IN NO EVENT SHALL THE X CONSORTIUM BE LIABLE + FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION + OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN + CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + THE SOFTWARE. + + Except as contained in this notice, the name of the X + Consortium shall not be used in advertising or otherwise to + promote the sale, use or other dealings in this Software + without prior written authorization from the X Consortium. X + Window System is a trademark of The Open Group. + + Copyright © 2008 by Peter Hutterer + + Permission is hereby granted, free of charge, to any person + obtaining a copy of this software and associated documentation + files (the "Software"), to deal in the Software without + restriction, including without limitation the rights to use, + copy, modify, merge, publish, distribute, sublicense, and/or + sell copies of the Software, and to permit persons to whom the + Software is furnished to do so, subject to the following + conditions: + + The above copyright notice and this permission notice + (including the next paragraph) shall be included in all copies + or substantial portions of the Software. + + THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + OTHER DEALINGS IN THE SOFTWARE. + +1. Input Extension Overview + + This document defines an extension to the X11 protocol to + support input devices other than the core X keyboard and + pointer. An accompanying document defines a corresponding + extension to Xlib (similar extensions for languages other than + C are anticipated). This first section gives an overview of the + input extension. The next section defines the new protocol + requests defined by the extension. We conclude with a + description of the new input events generated by the additional + input devices. + + This document only describes the behaviour of servers supporting + up to the X Input Extension 1.5. For servers supporting the X + Input Extensions 2.0, see XI2proto.txt. New clients are discouraged + from using this protocol specification. Instead, the use of XI 2.x + is recommended. + +1.1 Design Approach + + The design approach of the extension is to define requests and + events analogous to the core requests and events. This allows + extension input devices to be individually distinguishable from + each other and from the core input devices. These requests and + events make use of a device identifier and support the + reporting of n-dimensional motion data as well as other data + that is not reportable via the core input events. + +1.2 Core Input Devices + + The X server core protocol supports two input devices: a + pointer and a keyboard. The pointer device has two major + functions. First, it may be used to generate motion information + that client programs can detect. Second, it may also be used to + indicate the current location and focus of the X keyboard. To + accomplish this, the server echoes a cursor at the current + position of the X pointer. Unless the X keyboard has been + explicitly focused, this cursor also shows the current location + and focus of the X keyboard. The X keyboard is used to generate + input that client programs can detect. + + In servers supporting XI 1.4 and above, the core pointer and + the core keyboard are virtual devices that do not represent a + physical device connected to the host computer. + In servers supporting XI 2.0 and above, there may be multiple + core pointers and keyboards. Refer to XI2proto.txt for more + information. + + The X keyboard and X pointer are referred to in this document + as the core devices, and the input events they generate + (KeyPress, KeyRelease, ButtonPress, ButtonRelease, and + MotionNotify) are known as the core input events. All other + input devices are referred to as extension input devices and + the input events they generate are referred to as extension + input events. + + In servers supporting only XI 1.x, this input extension does + not change the behavior or functionality of the core input + devices, core events, or core protocol requests, with the + exception of the core grab requests. These requests may affect + the synchronization of events from extension devices. See the + explanation in the section titled "Event Synchronization and + Core Grabs". + + Selection of the physical devices to be initially used by the + server as the core devices is left implementation-dependent. + Requests are defined that allow client programs to change which + physical devices are used as the core devices. + +1.3 Extension Input Devices + + The input extension v1.x controls access to input devices other + than the X keyboard and X pointer. It allows client programs to + select input from these devices independently from each other + and independently from the core devices. + + A client that wishes to access a specific device must first + determine whether that device is connected to the X server. + This is done through the ListInputDevices request, which will + return a list of all devices that can be opened by the X + server. A client can then open one or more of these devices + using the OpenDevice request, specify what events they are + interested in receiving, and receive and process input events + from extension devices in the same way as events from the X + keyboard and X pointer. Input events from these devices are of + extension types ( DeviceKeyPress, DeviceKeyRelease, + DeviceButtonPress, DeviceButtonRelease, DeviceMotionNotify, + etc.) and contain a device identifier so that events of the + same type coming from different input devices can be + distinguished. + + Any kind of input device may be used as an extension input + device. Extension input devices may have 0 or more keys, 0 or + more buttons, and may report 0 or more axes of motion. Motion + may be reported as relative movements from a previous position + or as an absolute position. All valuators reporting motion + information for a given extension input device must report the + same kind of motion information (absolute or relative). + + This extension is designed to accommodate new types of input + devices that may be added in the future. The protocol requests + that refer to specific characteristics of input devices + organize that information by input classes. Server implementors + may add new classes of input devices without changing the + protocol requests. Input classes are unique numbers registered + with the X Consortium. Each extension input device may support + multiple input classes. + + In XI 1.x, all extension input devices are treated like the + core X keyboard in determining their location and focus. The + server does not track the location of these devices on an + individual basis, and therefore does not echo a cursor to + indicate their current location. Instead, their location is + determined by the location of the core X pointer. Like the core + X keyboard, some may be explicitly focused. If they are not + explicitly focused, their focus is determined by the location + of the core X pointer. + + Most input events reported by the server to a client are of + fixed size (32 bytes). In order to represent the change in + state of an input device the extension may need to generate a + sequence of input events. A client side library (such as Xlib) + will typically take these raw input events and format them into + a form more convenient to the client. + +1.4 Event Classes + + In the core protocol a client registers interest in receiving + certain input events directed to a window by modifying that + window's event-mask. Most of the bits in the event mask are + already used to specify interest in core X events. The input + extension specifies a different mechanism by which a client can + express interest in events generated by this extension. + + When a client opens a extension input device via the OpenDevice + request, an XDevice structure is returned. Macros are provided + that extract 32-bit numbers called event classes from that + structure, that a client can use to register interest in + extension events via the SelectExtensionEvent request. The + event class combines the desired event type and device id, and + may be thought of as the equivalent of core event masks. + +1.5 Input Classes + + Some of the input extension requests divide input devices into + classes based on their functionality. This is intended to allow + new classes of input devices to be defined at a later time + without changing the semantics of these requests. The following + input device classes are currently defined: + + KEY + The device reports key events. + + BUTTON + The device reports button events. + + VALUATOR + The device reports valuator data in motion events. + + PROXIMITY + The device reports proximity events. + + FOCUS + The device can be focused and reports focus events. + + FEEDBACK + The device supports feedbacks. + + OTHER + The ChangeDeviceNotify, DeviceMappingNotify, and + DeviceStateNotify macros may be invoked passing the + XDevice structure returned for this device. + + Each extension input device may support multiple input classes. + Additional classes may be added in the future. Requests that + support multiple input classes, such as the ListInputDevices + function that lists all available input devices, organize the + data they return by input class. Client programs that use these + requests should not access data unless it matches a class + defined at the time those clients were compiled. In this way, + new classes can be added without forcing existing clients that + use these requests to be recompiled. + +2. Requests + + Extension input devices are accessed by client programs through + the use of new protocol requests. This section summarizes the + new requests defined by this extension. The syntax and type + definitions used below follow the notation used for the X11 + core protocol. + +2.1 Getting the Extension Version + + The GetExtensionVersion request returns version information + about the input extension. + + GetExtensionVersion + name: STRING + => + present: BOOL + protocol-major-version: CARD16 + protocol-minor-version: CARD16 + + The protocol version numbers returned indicate the version of + the input extension supported by the target X server. The + version numbers can be compared to constants defined in the + header file XI.h. Each version is a superset of the previous + versions. + + The name must be the name of the Input Extension as defined + in the header file XI.h. + +2.2 Listing Available Devices + + A client that wishes to access a specific device must first + determine whether that device is connected to the X server. + This is done through the ListInputDevices request, which will + return a list of all devices that can be opened by the X + server. + + ListInputDevices + => + input-devices: ListOfDeviceInfo + + where + + DEVICEINFO: + [type: ATOM + id: CARD8 + num_classes: CARD8 + use: {IsXKeyboard, IsXPointer, IsXExtensionPointer, + IsXExtensionKeyboard, IsExtensionDevice} + info: LISTofINPUTINFO + name: STRING8] + + INPUTINFO: {KEYINFO, BUTTONINFO, VALUATORINFO} + KEYINFO: + [class: CARD8 + length: CARD8 + min-keycode: KEYCODE + max-keycode: KEYCODE + num-keys: CARD16] + BUTTONINFO: + [class: CARD8 + length: CARD8 + num-buttons: CARD16] + VALUATORINFO: + [class: CARD8 + length: CARD8 + num_axes: CARD8 + mode: SETofDEVICEMODE + motion_buffer_size: CARD32 + axes: LISTofAXISINFO] + + AXISINFO: + [resolution: CARD32 + min-val: CARD32 + max-val: CARD32] + DEVICEMODE: {Absolute, Relative} + + Errors: None + + This request returns a list of all devices that can be opened + by the X server, including the core X keyboard and X pointer. + Some implementations may open all input devices as part of X + initialization, while others may not open an input device until + requested to do so by a client program. + + The information returned for each device is as follows: + + type + The type field is of type Atom and indicates the nature + of the device. Clients may determine device types by + invoking the XInternAtom request passing one of the + names defined in the header file XI.h. The following + names have been defined to date: + + MOUSE + TABLET + KEYBOARD + TOUCHSCREEN + TOUCHPAD + BUTTONBOX + BARCODE + KNOB_BOX + TRACKBALL + QUADRATURE + SPACEBALL + DATAGLOVE + EYETRACKER + CURSORKEYS + FOOTMOUSE + ID_MODULE + ONE_KNOB + NINE_KNOB + JOYSTICK + + + id + The id is a small cardinal value in the range 0-128 that + uniquely identifies the device. It is assigned to the + device when it is initialized by the server. Some + implementations may not open an input device until + requested by a client program, and may close the device + when the last client accessing it requests that it be + closed. If a device is opened by a client program via + XOpenDevice, then closed via XCloseDevice, then opened + again, it is not guaranteed to have the same id after + the second open request. + + num_classes + The num_classes field is a small cardinal value in the + range 0-255 that specifies the number of input classes + supported by the device for which information is + returned by ListInputDevices. Some input classes, such + as class Focus and class Proximity do not have any + information to be returned by ListInputDevices. + + use + The use field specifies how the device is currently + being used. If the value is IsXKeyboard, the device is + currently being used as the X keyboard. If the value is + IsXPointer, the device is currently being used as the X + pointer. If the value is IsXExtensionPointer, the device + is available for use as an extension pointer. If the value + is IsXExtensionKeyboard, the device is available for use as + and extension keyboard. + Older versions of XI report all extension devices as + IsXExtensionDevice. + + name + The name field contains a pointer to a null-terminated + string that corresponds to one of the defined device + types. + + InputInfo + InputInfo is one of: KeyInfo, ButtonInfo or + ValuatorInfo. The first two fields are common to all + three: + + class + The class field is a cardinal value in the range + 0-255. It uniquely identifies the class of input + for which information is returned. + + length + The length field is a cardinal value in the range + 0-255. It specifies the number of bytes of data + that are contained in this input class. The length + includes the class and length fields. + + The remaining information returned for input class + KEYCLASS is as follows: + + min_keycode + min_keycode is of type KEYCODE. It specifies the + minimum keycode that the device will report. The + minimum keycode will not be smaller than 8. + + max_keycode + max_keycode is of type KEYCODE. It specifies the + maximum keycode that the device will report. The + maximum keycode will not be larger than 255. + + num_keys + num_keys is a cardinal value that specifies the + number of keys that the device has. + + The remaining information returned for input class + BUTTONCLASS is as follows: + + num_buttons + num_buttons is a cardinal value that specifies the + number of buttons that the device has. + + The remaining information returned for input class + VALUATORCLASS is as follows: + + mode + mode is a constant that has one of the following + values: Absolute or Relative. Some devices allow + the mode to be changed dynamically via the + SetDeviceMode request. + + motion_buffer_size + motion_buffer_size is a cardinal number that + specifies the number of elements that can be + contained in the motion history buffer for the + device. + + axes + The axes field contains a pointer to an AXISINFO + struture. + + The information returned for each axis reported by the + device is: + + resolution + The resolution is a cardinal value in + counts/meter. + + min_val + The min_val field is a cardinal value in that + contains the minimum value the device reports for + this axis. For devices whose mode is Relative, the + min_val field will contain 0. + + max_val + The max_val field is a cardinal value in that + contains the maximum value the device reports for + this axis. For devices whose mode is Relative, the + max_val field will contain 0. + +2.3 Enabling Devices + + Client programs that wish to access an extension device must + request that the server open that device. This is done via the + OpenDevice request. + + OpenDevice + id: CARD8 + => + DEVICE: + [device_id: XID + num_classes: INT32 + classes: LISTofINPUTCLASSINFO] + INPUTCLASSINFO: + [input_class: CARD8 + event_type_base: CARD8] + + Errors: Device + + This request returns the event classes to be used by the client + to indicate which events the client program wishes to receive. + Each input class may report several event classes. For example, + input class Keys reports DeviceKeyPress and DeviceKeyRelease + event classes. Input classes are unique numbers registered with + the X Consortium. Input class Other exists to report event + classes that are not specific to any one input class, such as + DeviceMappingNotify, ChangeDeviceNotify, and DeviceStateNotify. + + The information returned for each device is as follows: + + device_id + The device_id is a number that uniquely identifies the + device. + + num_classes + The num_classes field contains the number of input + classes supported by this device. + + For each class of input supported by the device, the + InputClassInfo structure contains the following information: + + input_class + The input_class is a small cardinal number that + identifies the class of input. + + event_type_base + The event_type_base is a small cardinal number that + specifies the event type of one of the events reported + by this input class. This information is not directly + used by client programs. Instead, the Device is used by + macros that return extension event types and event + classes. This is described in the section of this + document entitled "Selecting Extension Device Events". + + The information in the InputClassInfo reflects the state of + this device at the time the request was processed. + + Before it exits, the client program should explicitly request + that the server close the device. This is done via the + CloseDevice request. + + A client may open the same extension device more than once. + Requests after the first successful one return an additional + XDevice structure with the same information as the first, but + otherwise have no effect. A single CloseDevice request will + terminate that client's access to the device. + + Closing a device releases any active or passive grabs the + requesting client has established. If the device is frozen only + by an active grab of the requesting client, the queued events + are released when the client terminates. + + If a client program terminates without closing a device, the + server will automatically close that device on behalf of the + client. This does not affect any other clients that may be + accessing that device. + + CloseDevice: + device: DEVICE + + Errors: Device + +2.4 Changing The Mode Of A Device + + Some devices are capable of reporting either relative or + absolute motion data. To change the mode of a device from + relative to absolute, use the SetDeviceMode request. The valid + values are Absolute or Relative. + + This request will fail and return DeviceBusy if another client + already has the device open with a different mode. It will fail + and return AlreadyGrabbed if another client has the device + grabbed. The request will fail with a BadMatch error if the + requested mode is not supported by the device. + + SetDeviceMode + device:DEVICE + mode: {Absolute, Relative} + => + status: {Success, DeviceBusy, AlreadyGrabbed} + + Errors: Device, Match, Mode + +2.5 Initializing Valuators on an Input Device + + Some devices that report absolute positional data can be + initialized to a starting value. Devices that are capable of + reporting relative motion or absolute positional data may + require that their valuators be initialized to a starting value + after the mode of the device is changed to Absolute. To + initialize the valuators on such a device, use the + SetDeviceValuators request. + + SetDeviceValuators + device: DEVICE + first_valuator: CARD8 + num_valuators: CARD8 + valuators: LISTOFINT32 + => + status: {Success, AlreadyGrabbed} + + Errors: Length, Device, Match, Value + + This request initializes the specified valuators on the + specified extension input device. Valuators are numbered + beginning with zero. Only the valuators in the range specified + by first_valuator and num_valuators are set. If the number of + valuators supported by the device is less than the expression + first_valuator + num_valuators, a Value error will result. + + If the request succeeds, Success is returned. If the specifed + device is grabbed by some other client, the request will fail + and a status of AlreadyGrabbed will be returned. + +2.6 Getting Input Device Controls + + GetDeviceControl + device: DEVICE + control: XID + => + controlState: {DeviceState} + + where + + DeviceState: DeviceResolutionState + + Errors: Length, Device, Match, Value + + This request returns the current state of the specified device + control. The device control must be supported by the target + server and device or an error will result. + + If the request is successful, a pointer to a generic + DeviceState structure will be returned. The information + returned varies according to the specified control and is + mapped by a structure appropriate for that control. + + GetDeviceControl will fail with a BadValue error if the server + does not support the specified control. It will fail with a + BadMatch error if the device does not support the specified + control. + + Supported device controls and the information returned for them + include: + + DEVICE_RESOLUTION: + [control: CARD16 + length: CARD16 + num_valuators: CARD8 + resolutions: LISTofCARD32 + min_resolutions: LISTofCARD32 + max_resolutions: LISTofCARD32] + + This device control returns a list of valuators and the range + of valid resolutions allowed for each. Valuators are numbered + beginning with 0. Resolutions for all valuators on the device + are returned. For each valuator i on the device, resolutions[i] + returns the current setting of the resolution, + min_resolutions[i] returns the minimum valid setting, and + max_resolutions[i] returns the maximum valid setting. + + When this control is specified, XGetDeviceControl will fail + with a BadMatch error if the specified device has no valuators. + + ChangeDeviceControl: + device: DEVICE + XID: controlId + control: DeviceControl + + where + + DeviceControl: DeviceResolutionControl + => + status: {Success, DeviceBusy, AlreadyGrabbed} + + Errors: Length, Device, Match, Value + + ChangeDeviceControl changes the specifed device control + according to the values specified in the DeviceControl + structure. The device control must be supported by the target + server and device or an error will result. + + The information passed with this request varies according to + the specified control and is mapped by a structure appropriate + for that control. + + ChangeDeviceControl will fail with a BadValue error if the + server does not support the specified control. It will fail + with a BadMatch error if the server supports the specified + control, but the requested device does not. The request will + fail and return a status of DeviceBusy if another client + already has the device open with a device control state that + conflicts with the one specified in the request. It will fail + with a status of AlreadyGrabbed if some other client has + grabbed the specified device. If the request succeeds, Success + is returned. If it fails, the device control is left unchanged. + + Supported device controls and the information specified for + them include: + + DEVICE_RESOLUTION: + [control: CARD16 + length: CARD16 + first_valuator: CARD8 + num_valuators: CARD8 + resolutions: LISTofCARD32] + + This device control changes the resolution of the specified + valuators on the specified extension input device. Valuators + are numbered beginning with zero. Only the valuators in the + range specified by first_valuator and num_valuators are set. A + value of -1 in the resolutions list indicates that the + resolution for this valuator is not to be changed. + num_valuators specifies the number of valuators in the + resolutions list. + + When this control is specified, XChangeDeviceControl will fail + with a BadMatch error if the specified device has no valuators. + If a resolution is specified that is not within the range of + valid values (as returned by XGetDeviceControl) the request + will fail with a BadValue error. If the number of valuators + supported by the device is less than the expression + first_valuator + num_valuators, a BadValue error will result. + + If the request fails for any reason, none of the valuator + resolutions will be changed. + + ChangeDeviceControl causes the server to send a DevicePresence + event to interested clients. + +2.7 Selecting Extension Device Events + + Extension input events are selected using the + SelectExtensionEvent request. + + SelectExtensionEvent + interest: LISTofEVENTCLASS + window: WINDOW + + Errors: Window, Class, Access + + This request specifies to the server the events within the + specified window which are of interest to the client. As with + the core XSelectInput function, multiple clients can select + input on the same window. + + XSelectExtensionEvent requires a list of event classes. An + event class is a 32-bit number that combines an event type and + device id, and is used to indicate which event a client wishes + to receive and from which device it wishes to receive it. + Macros are provided to obtain event classes from the data + returned by the XOpenDevice request. The names of these macros + correspond to the desired events, i.e. the DeviceKeyPress is + used to obtain the event class for DeviceKeyPress events. The + syntax of the macro invocation is: + DeviceKeyPress (device, event_type, event_class); + device: DEVICE + event_type: INT + event_class: INT + + The value returned in event_type is the value that will be + contained in the event type field of the XDeviceKeyPressEvent + when it is received by the client. The value returned in + event_class is the value that should be passed in making an + XSelectExtensionEvent request to receive DeviceKeyPress events. + + For DeviceButtonPress events, the client may specify whether or + not an implicit passive grab should be done when the button is + pressed. If the client wants to guarantee that it will receive + a DeviceButtonRelease event for each DeviceButtonPress event it + receives, it should specify the DeviceButtonPressGrab event + class as well as the DeviceButtonPress event class. This + restricts the client in that only one client at a time may + request DeviceButtonPress events from the same device and + window if any client specifies this class. + + If any client has specified the DeviceButtonPressGrab class, + any requests by any other client that specify the same device + and window and specify DeviceButtonPress or + DeviceButtonPressGrab will cause an Access error to be + generated. + + If only the DeviceButtonPress class is specified, no implicit + passive grab will be done when a button is pressed on the + device. Multiple clients may use this class to specify the same + device and window combination. + + A client may also specify the DeviceOwnerGrabButton class. If + it has specified both the DeviceButtonPressGrab and the + DeviceOwnerGrabButton classes, implicit passive grabs will + activate with owner_events set to True. If only the + DeviceButtonPressGrab class is specified, implicit passive + grabs will activate with owner_events set to False. + + The client may select DeviceMotion events only when a button is + down. It does this by specifying the event classes + Button1Motion through Button5Motion, or ButtonMotion. An input + device will only support as many button motion classes as it + has buttons. + +2.8 Determining Selected Events + + To determine which extension events are currently selected from + a given window, use GetSelectedExtensionEvents. + + GetSelectedExtensionEvents + window: WINDOW + => + this-client: LISTofEVENTCLASS + all-clients: LISTofEVENTCLASS + + Errors: Window + + This request returns two lists specifying the events selected + on the specified window. One list gives the extension events + selected by this client from the specified window. The other + list gives the extension events selected by all clients from + the specified window. This information is equivalent to that + returned by your-event-mask and all-event-masks in a + GetWindowAttributes request. + +2.9 Controlling Event Propagation + + Extension events propagate up the window hierarchy in the same + manner as core events. If a window is not interested in an + extension event, it usually propagates to the closest ancestor + that is interested, unless the dont_propagate list prohibits + it. Grabs of extension devices may alter the set of windows + that receive a particular extension event. + + Client programs may control extension event propagation through + the use of the following two requests. + + XChangeDeviceDontPropagateList adds an event to or deletes an + event from the do_not_propagate list of extension events for + the specified window. This list is maintained for the life of + the window, and is not altered if the client terminates. + + ChangeDeviceDontPropagateList + window: WINDOW + eventclass: LISTofEVENTCLASS + mode: {AddToList, DeleteFromList} + + Errors: Window, Class, Mode + + This function modifies the list specifying the events that are + not propagated to the ancestors of the specified window. You + may use the modes AddToList or DeleteFromList. + + GetDeviceDontPropagateList + window: WINDOW + Errors: Window + => + dont-propagate-list: LISTofEVENTCLASS + + This function returns a list specifying the events that are not + propagated to the ancestors of the specified window. + +2.10 Sending Extension Events + + One client program may send an event to another via the + XSendExtensionEvent function. + + The event in the XEvent structure must be one of the events + defined by the input extension, so that the X server can + correctly byte swap the contents as necessary. The contents of + the event are otherwise unaltered and unchecked by the X server + except to force send_event to True in the forwarded event and + to set the sequence number in the event correctly. + + XSendExtensionEvent returns zero if the conversion-to-wire + protocol failed, otherwise it returns nonzero. + + SendExtensionEvent + device: DEVICE + destination: WINDOW + propagate: BOOL + eventclass: LISTofEVENTCLASS + event: XEVENT + + Errors: Device, Value, Class, Window + +2.11 Getting Motion History + + GetDeviceMotionEvents + device: DEVICE + start, stop: TIMESTAMP or CurrentTime + => + nevents_return: CARD32 + mode_return: {Absolute, Relative} + axis_count_return: CARD8 + events: LISTofDEVICETIMECOORD + + where + + DEVICETIMECOORD: + [data: LISTofINT32 + time: TIMESTAMP] + + Errors: Device, Match + + This request returns all positions in the device's motion + history buffer that fall between the specified start and stop + times inclusive. If the start time is in the future, or is + later than the stop time, no positions are returned. + + The data field of the DEVICETIMECOORD structure is a sequence + of data items. Each item is of type INT32, and there is one + data item per axis of motion reported by the device. The number + of axes reported by the device is returned in the axis_count + variable. + + The value of the data items depends on the mode of the device, + which is returned in the mode variable. If the mode is + Absolute, the data items are the raw values generated by the + device. These may be scaled by the client program using the + maximum values that the device can generate for each axis of + motion that it reports. The maximum and minimum values for each + axis are reported by the ListInputDevices request. + + If the mode is Relative, the data items are the relative values + generated by the device. The client program must choose an + initial position for the device and maintain a current position + by accumulating these relative values. + +2.12 Changing The Core Devices + + These requests are provided to change which physical device is + used as the X pointer or X keyboard. These requests are + deprecated in servers supporting XI 1.4 and above, and will + always return a a BadDevice error. + + Using these requests may change the characteristics of the core + devices. The new pointer device may have a different number of + buttons than the old one did, or the new keyboard device may + have a different number of keys or report a different range of + keycodes. Client programs may be running that depend on those + characteristics. For example, a client program could allocate + an array based on the number of buttons on the pointer device, + and then use the button numbers received in button events as + indicies into that array. Changing the core devices could cause + such client programs to behave improperly or abnormally + terminate. + + These requests change the X keyboard or X pointer device and + generate an ChangeDeviceNotify event and a MappingNotify event. + The ChangeDeviceNotify event is sent only to those clients that + have expressed an interest in receiving that event via the + XSelectExtensionEvent request. The specified device becomes the + new X keyboard or X pointer device. The location of the core + device does not change as a result of this request. + + These requests fail and return AlreadyGrabbed if either the + specified device or the core device it would replace are + grabbed by some other client. They fail and return GrabFrozen + if either device is frozen by the active grab of another + client. + + These requests fail with a BadDevice error if the specified + device is invalid, or has not previously been opened via + OpenDevice. To change the X keyboard device, use the + ChangeKeyboardDevice request. The specified device must support + input class Keys (as reported in the ListInputDevices request) + or the request will fail with a BadMatch error. Once the device + has successfully replaced one of the core devices, it is + treated as a core device until it is in turn replaced by + another ChangeDevice request, or until the server terminates. + The termination of the client that changed the device will not + cause it to change back. Attempts to use the CloseDevice + request to close the new core device will fail with a BadDevice + error. + + The focus state of the new keyboard is the same as the focus + state of the old X keyboard. If the new keyboard was not + initialized with a FocusRec, one is added by the + ChangeKeyboardDevice request. The X keyboard is assumed to have + a KbdFeedbackClassRec. If the device was initialized without a + KbdFeedbackClassRec, one will be added by this request. The + KbdFeedbackClassRec will specify a null routine as the control + procedure and the bell procedure. + + ChangeKeyboardDevice + device: DEVICE + Errors: Device, Match + => + status: Success, AlreadyGrabbed, Frozen + + To change the X pointer device, use the ChangePointerDevice + request. The specified device must support input class + Valuators (as reported in the ListInputDevices request) or the + request will fail with a BadMatch error. The valuators to be + used as the x- and y-axes of the pointer device must be + specified. Data from other valuators on the device will be + ignored. + + The X pointer device does not contain a FocusRec. If the new + pointer was initialized with a FocusRec, it is freed by the + ChangePointerDevice request. The X pointer is assumed to have a + ButtonClassRec and a PtrFeedbackClassRec. If the device was + initialized without a ButtonClassRec or a PtrFeedbackClassRec, + one will be added by this request. The ButtonClassRec added + will have no buttons, and the PtrFeedbackClassRec will specify + a null routine as the control procedure. + + If the specified device reports absolute positional + information, and the server implementation does not allow such + a device to be used as the X pointer, the request will fail + with a BadDevice error. + + Once the device has successfully replaced one of the core + devices, it is treated as a core device until it is in turn + replaced by another ChangeDevice request, or until the server + terminates. The termination of the client that changed the + device will not cause it to change back. Attempts to use the + CloseDevice request to close the new core device will fail with + a BadDevice error. + + ChangePointerDevice + device: DEVICE + xaxis: CARD8 + yaxis: CARD8 + => + status: Success, AlreadyGrabbed, Frozen + + Errors: Device, Match + +2.12 Event Synchronization And Core Grabs + + Implementation of the input extension requires an extension of + the meaning of event synchronization for the core grab + requests. This is necessary in order to allow window managers + to freeze all input devices with a single request. + + The core grab requests require a pointer_mode and keyboard_mode + argument. The meaning of these modes is changed by the input + extension. For the XGrabPointer and XGrabButton requests, + pointer_mode controls synchronization of the pointer device, + and keyboard_mode controls the synchronization of all other + input devices. For the XGrabKeyboard and XGrabKey requests, + pointer_mode controls the synchronization of all input devices + except the X keyboard, while keyboard_mode controls the + synchronization of the keyboard. When using one of the core + grab requests, the synchronization of extension devices is + controlled by the mode specified for the device not being + grabbed. + +2.13 Extension Active Grabs + + Active grabs of extension devices are supported via the + GrabDevice request in the same way that core devices are + grabbed using the core GrabKeyboard request, except that a + Device is passed as a function parameter. A list of events that + the client wishes to receive is also passed. The UngrabDevice + request allows a previous active grab for an extension device + to be released. + + To grab an extension device, use the GrabDevice request. The + device must have previously been opened using the OpenDevice + request. + + GrabDevice + device: DEVICE + grab-window: WINDOW + owner-events: BOOL + event-list: LISTofEVENTCLASS + this-device-mode: {Synchronous, Asynchronous} + other-device-mode: {Synchronous, Asynchronous} + time:TIMESTAMP or CurrentTime + => + status: Success, AlreadyGrabbed, Frozen, + InvalidTime, NotViewable + + Errors: Device, Window, Value + + This request actively grabs control of the specified input + device. Further input events from this device are reported only + to the grabbing client. This request overrides any previous + active grab by this client for this device. + + The event-list parameter is a pointer to a list of event + classes. These are used to indicate which events the client + wishes to receive while the device is grabbed. Only event + classes obtained from the grabbed device are valid. + + If owner-events is False, input events generated from this + device are reported with respect to grab-window, and are only + reported if selected by being included in the event-list. If + owner-events is True, then if a generated event would normally + be reported to this client, it is reported normally, otherwise + the event is reported with respect to the grab-window, and is + only reported if selected by being included in the event-list. + For either value of owner-events, unreported events are + discarded. + + If this-device-mode is Asynchronous, device event processing + continues normally. If the device is currently frozen by this + client, then processing of device events is resumed. If + this-device-mode is Synchronous, the state of the grabbed + device (as seen by means of the protocol) appears to freeze, + and no further device events are generated by the server until + the grabbing client issues a releasing AllowDeviceEvents + request or until the device grab is released. Actual device + input events are not lost while the device is frozen; they are + simply queued for later processing. + + If other-device-mode is Asynchronous, event processing is + unaffected by activation of the grab. If other-device-mode is + Synchronous, the state of all input devices except the grabbed + one (as seen by means of the protocol) appears to freeze, and + no further events are generated by the server until the + grabbing client issues a releasing AllowDeviceEvents request or + until the device grab is released. Actual events are not lost + while the devices are frozen; they are simply queued for later + processing. + + This request generates DeviceFocusIn and DeviceFocusOut events. + + This request fails and returns: + + AlreadyGrabbed + If the device is actively grabbed by some other client. + + NotViewable + If grab-window is not viewable. + + InvalidTime + If the specified time is earlier than the last-grab-time + for the specified device or later than the current X + server time. Otherwise, the last-grab-time for the + specified device is set to the specified time and + CurrentTime is replaced by the current X server time. + + Frozen + If the device is frozen by an active grab of another + client. + + If a grabbed device is closed by a client while an active grab + by that client is in effect, that active grab will be released. + Any passive grabs established by that client will be released. + If the device is frozen only by an active grab of the + requesting client, it is thawed. + + To release a grab of an extension device, use UngrabDevice. + + UngrabDevice + device: DEVICE + time: TIMESTAMP or CurrentTime + + Errors: Device + + This request releases the device if this client has it actively + grabbed (from either GrabDevice or GrabDeviceKey) and releases + any queued events. If any devices were frozen by the grab, + UngrabDevice thaws them. The request has no effect if the + specified time is earlier than the last-device-grab time or is + later than the current server time. + + This request generates DeviceFocusIn and DeviceFocusOut events. + + An UngrabDevice is performed automatically if the event window + for an active device grab becomes not viewable. + +2.14 Passively Grabbing A Key + + Passive grabs of buttons and keys on extension devices are + supported via the GrabDeviceButton and GrabDeviceKey requests. + These passive grabs are released via the UngrabDeviceKey and + UngrabDeviceButton requests. + + To passively grab a single key on an extension device, use + GrabDeviceKey. That device must have previously been opened + using the OpenDevice request. + + GrabDeviceKey + device: DEVICE + keycode: KEYCODE or AnyKey + modifiers: SETofKEYMASK or AnyModifier + modifier-device: DEVICE or NULL + grab-window: WINDOW + owner-events: BOOL + event-list: LISTofEVENTCLASS + this-device-mode: {Synchronous, Asynchronous} + other-device-mode: {Synchronous, Asynchronous} + + Errors: Device, Match, Access, Window, Value + + This request is analogous to the core GrabKey request. It + establishes a passive grab on a device. Consequently, in the + future: + * IF the device is not grabbed and the specified key, which + itself can be a modifier key, is logically pressed when the + specified modifier keys logically are down on the specified + modifier device (and no other keys are down), + * AND no other modifier keys logically are down, + * AND EITHER the grab window is an ancestor of (or is) the + focus window OR the grab window is a descendent of the + focus window and contains the pointer, + * AND a passive grab on the same device and key combination + does not exist on any ancestor of the grab window, + * THEN the device is actively grabbed, as for GrabDevice, the + last-device-grab time is set to the time at which the key + was pressed (as transmitted in the DeviceKeyPress event), + and the DeviceKeyPress event is reported. + + The interpretation of the remaining arguments is as for + GrabDevice. The active grab is terminated automatically when + logical state of the device has the specified key released + (independent of the logical state of the modifier keys). + + Note that the logical state of a device (as seen by means of + the X protocol) may lag the physical state if device event + processing is frozen. + + A modifier of AnyModifier is equivalent to issuing the request + for all possible modifier combinations (including the + combination of no modifiers). It is not required that all + modifiers specified have currently assigned keycodes. A key of + AnyKey is equivalent to issuing the request for all possible + keycodes. Otherwise, the key must be in the range specified by + min-keycode and max-keycode in the ListInputDevices request. If + it is not within that range, GrabDeviceKey generates a Value + error. + + NULL may be passed for the modifier_device. If the + modifier_device is NULL, the core X keyboard is used as the + modifier_device. + + An Access error is generated if some other client has issued a + GrabDeviceKey with the same device and key combination on the + same window. When using AnyModifier or AnyKey, the request + fails completely and the X server generates a Access error and + no grabs are established if there is a conflicting grab for any + combination. + + This request cannot be used to grab a key on the X keyboard + device. The core GrabKey request should be used for that + purpose. + + To release a passive grab of a single key on an extension + device, use UngrabDeviceKey. + + UngrabDeviceKey + device: DEVICE + keycode: KEYCODE or AnyKey + modifiers: SETofKEYMASK or AnyModifier + modifier-device: DEVICE or NULL + grab-window: WINDOW + + Errors: Device, Match, Window, Value, Alloc + + This request is analogous to the core UngrabKey request. It + releases the key combination on the specified window if it was + grabbed by this client. A modifier of AnyModifier is equivalent + to issuing the request for all possible modifier combinations + (including the combination of no modifiers). A key of AnyKey is + equivalent to issuing the request for all possible keycodes. + This request has no effect on an active grab. + + NULL may be passed for the modifier_device. If the + modifier_device is NULL, the core X keyboard is used as the + modifier_device. + +2.15 Passively Grabbing A Button + + To establish a passive grab for a single button on an extension + device, use GrabDeviceButton. + + GrabDeviceButton + device: DEVICE + button: BUTTON or AnyButton + modifiers: SETofKEYMASK or AnyModifier + modifier-device: DEVICE or NULL + grab-window: WINDOW + owner-events: BOOL + event-list: LISTofEVENTCLASS + this-device-mode: {Synchronous, Asynchr + onous} + other-device-mode: {Synchronous, Asynch + ronous} + + Errors: Device, Match, Window, Access, Value + + This request is analogous to the core GrabButton request. It + establishes an explicit passive grab for a button on an + extension input device. Since the server does not track + extension devices, no cursor is specified with this request. + For the same reason, there is no confine-to parameter. The + device must have previously been opened using the OpenDevice + request. + + The GrabDeviceButton request establishes a passive grab on a + device. Consequently, in the future, + + • + IF the device is not grabbed and the specified button is + logically pressed when the specified modifier keys + logically are down (and no other buttons or modifier + keys are down), + + • + AND the grab window contains the device, + + • + AND a passive grab on the same device and button/ key + combination does not exist on any ancestor of the grab + window, + + • + THEN the device is actively grabbed, as for GrabDevice, + the last-grab time is set to the time at which the + button was pressed (as transmitted in the + DeviceButtonPress event), and the DeviceButtonPress + event is reported. + + The interpretation of the remaining arguments is as for + GrabDevice. The active grab is terminated automatically when + logical state of the device has all buttons released + (independent of the logical state of the modifier keys). + + Note that the logical state of a device (as seen by means of + the X protocol) may lag the physical state if device event + processing is frozen. + + A modifier of AnyModifier is equivalent to issuing the request + for all possible modifier combinations (including the + combination of no modifiers). It is not required that all + modifiers specified have currently assigned keycodes. A button + of AnyButton is equivalent to issuing the request for all + possible buttons. It is not required that the specified button + be assigned to a physical button. + + NULL may be passed for the modifier_device. If the + modifier_device is NULL, the core X keyboard is used as the + modifier_device. + + An Access error is generated if some other client has issued a + GrabDeviceButton with the same device and button combination on + the same window. When using AnyModifier or AnyButton, the + request fails completely and the X server generates a Access + error and no grabs are established if there is a conflicting + grab for any combination. The request has no effect on an + active grab. + + This request cannot be used to grab a button on the X pointer + device. The core GrabButton request should be used for that + purpose. + + To release a passive grab of a button on an extension device, + use UngrabDeviceButton. + + UngrabDeviceButton + device: DEVICE + button: BUTTON or AnyButton + modifiers: SETofKEYMASK or AnyModifier + modifier-device: DEVICE or NULL + grab-window: WINDOW + + Errors: Device, Match, Window, Value, Alloc + + This request is analogous to the core UngrabButton request. It + releases the passive button/key combination on the specified + window if it was grabbed by the client. A modifiers of + AnyModifier is equivalent to issuing the request for all + possible modifier combinations (including the combination of no + modifiers). A button of AnyButton is equivalent to issuing the + request for all possible buttons. This request has no effect on + an active grab. The device must have previously been opened + using the OpenDevice request otherwise a Device error will be + generated. + + NULL may be passed for the modifier_device. If the + modifier_device is NULL, the core X keyboard is used as the + modifier_device. + + This request cannot be used to ungrab a button on the X pointer + device. The core UngrabButton request should be used for that + purpose. + +2.16 Thawing A Device + + To allow further events to be processed when a device has been + frozen, use AllowDeviceEvents. + + AllowDeviceEvents + device: DEVICE + event-mode: {AsyncThisDevice, SyncThisD + evice, AsyncOtherDevices, + ReplayThisdevice, AsyncAll, or SyncAll} + time:TIMESTAMP or CurrentTime + + Errors: Device, Value + + The AllowDeviceEvents request releases some queued events if + the client has caused a device to freeze. The request has no + effect if the specified time is earlier than the last-grab time + of the most recent active grab for the client, or if the + specified time is later than the current X server time. + + The following describes the processing that occurs depending on + what constant you pass to the event-mode argument: + + * If the specified device is frozen by the client, event + processing for that device continues as usual. If the + device is frozen multiple times by the client on behalf + of multiple separate grabs, AsyncThisDevice thaws for + all. AsyncThisDevice has no effect if the specified + device is not frozen by the client, but the device need + not be grabbed by the client. + + * If the specified device is frozen and actively grabbed + by the client, event processing for that device + continues normally until the next button or key event is + reported to the client. At this time, the specified + device again appears to freeze. However, if the reported + event causes the grab to be released, the specified + device does not freeze. SyncThisDevice has no effect if + the specified device is not frozen by the client or is + not grabbed by the client. + + * If the specified device is actively grabbed by the + client and is frozen as the result of an event having + been sent to the client (either from the activation of a + GrabDeviceButton or from a previous AllowDeviceEvents + with mode SyncThisDevice, but not from a Grab), the grab + is released and that event is completely reprocessed. + This time, however, the request ignores any passive + grabs at or above (towards the root) the grab-window of + the grab just released. The request has no effect if the + specified device is not grabbed by the client or if it + is not frozen as the result of an event. + + * If the remaining devices are frozen by the client, event + processing for them continues as usual. If the other + devices are frozen multiple times by the client on + behalf of multiple separate grabs, AsyncOtherDevices + “thaws” for all. AsyncOtherDevices has no effect if the + devices are not frozen by the client, but those devices + need not be grabbed by the client. + + * If all devices are frozen by the client, event + processing (for all devices) continues normally until + the next button or key event is reported to the client + for a grabbed device (button event for the grabbed + device, key or motion event for the device), at which + time the devices again appear to freeze. However, if the + reported event causes the grab to be released, then the + devices do not freeze (but if any device is still + grabbed, then a subsequent event for it will still cause + all devices to freeze). SyncAll has no effect unless all + devices are frozen by the client. If any device is + frozen twice by the client on behalf of two separate + grabs, SyncAll "thaws" for both (but a subsequent freeze + for SyncAll will only freeze each device once). + + * If all devices are frozen by the client, event + processing (for all devices) continues normally. If any + device is frozen multiple times by the client on behalf + of multiple separate grabs, AsyncAll "thaws" for all. + AsyncAll has no effect unless all devices are frozen by + the client. + + AsyncThisDevice, SyncThisDevice, and ReplayThisDevice + have no effect on the processing of events from the + remaining devices. AsyncOtherDevices has no effect on + the processing of events from the specified device. When + the event_mode is SyncAll or AsyncAll, the device + parameter is ignored. + + It is possible for several grabs of different devices + (by the same or different clients) to be active + simultaneously. If a device is frozen on behalf of any + grab, no event processing is performed for the device. + It is possible for a single device to be frozen because + of several grabs. In this case, the freeze must be + released on behalf of each grab before events can again + be processed. + +2.17 Controlling Device Focus + + The current focus window for an extension input device can be + determined using the GetDeviceFocus request. Extension devices + are focused using the SetDeviceFocus request in the same way + that the keyboard is focused using the SetInputFocus request, + except that a device is specified as part of the request. One + additional focus state, FollowKeyboard, is provided for + extension devices. + + To get the current focus state, revert state, and focus time of + an extension device, use GetDeviceFocus. + + GetDeviceFocus + device: DEVICE + => + focus: WINDOW, PointerRoot, FollowKeyboard, or None + revert-to: Parent, PointerRoot, FollowKeyboard, or None + focus-time: TIMESTAMP + + Errors: Device, Match + + This request returns the current focus state, revert-to state, + and last-focus-time of an extension device. + + To set the focus of an extension device, use SetDeviceFocus. + + SetDeviceFocus + device: DEVICE + focus: WINDOW, PointerRoot, FollowKeyboard, or None + revert-to: Parent, PointerRoot, FollowKeyboard, or None + focus-time: TIMESTAMP + + Errors: Device, Window, Value, Match + + This request changes the focus for an extension input device + and the last-focus-change-time. The request has no effect if + the specified time is earlier than the last-focus-change-time + or is later than the current X server time. Otherwise, the + last-focus-change-time is set to the specified time, with + CurrentTime replaced by the current server time. + + The action taken by the server when this request is requested + depends on the value of the focus argument: + + * If the focus argument is None, all input events from + this device will be discarded until a new focus window + is set. In this case, the revert-to argument is ignored. + + * If a window ID is assigned to the focus argument, it + becomes the focus window of the device. If an input + event from the device would normally be reported to this + window or to one of its inferiors, the event is reported + normally. Otherwise, the event is reported relative to + the focus window. + + * If you assign PointerRoot to the focus argument, the + focus window is dynamically taken to be the root window + of whatever screen the pointer is on at each input + event. In this case, the revert-to argument is ignored. + + * If you assign FollowKeyboard to the focus argument, the + focus window is dynamically taken to be the same as the + focus of the X keyboard at each input event. + + The specified focus window must be viewable at the time + of the request (else a Match error). If the focus window + later becomes not viewable, the X server evaluates the + revert-to argument to determine the new focus window. + + * If you assign RevertToParent to the revert-to argument, + the focus reverts to the parent (or the closest viewable + ancestor), and the new revert-to value is taken to be + RevertToNone. + + * If you assign RevertToPointerRoot, + RevertToFollowKeyboard, or RevertToNone to the revert-to + argument, the focus reverts to that value. + + When the focus reverts, the X server generates DeviceFocusIn + and DeviceFocusOut events, but the last-focus-change time is + not affected. + + This request causes the X server to generate DeviceFocusIn and + DeviceFocusOut events. + +2.18 Controlling Device Feedback + + To get the settings of feedbacks on an extension device, use + GetFeedbackControl. This request provides functionality + equivalent to the core GetKeyboardControl and GetPointerControl + functions. It also provides a way to control displays + associated with an input device that are capable of displaying + an integer or string. + + GetFeedbackControl + device: DEVICE + => + num_feedbacks_return: CARD16 + return_value: LISTofFEEDBACKSTATE + + where + + FEEDBACKSTATE: {KbdFeedbackState, PtrFeedbackState, + IntegerFeedbackState, StringFeedbackState, + BellFeedbackState, LedFeedbackState} + + Feedbacks are reported by class. Those feedbacks that are + reported for the core keyboard device are in class KbdFeedback, + and are returned in the KbdFeedbackState structure. The members + of that structure are as follows: + + CLASS Kbd: + [class: CARD8 + length: CARD16 + feedback id: CARD8 + key_click_percent: CARD8 + bell_percent: CARD8 + bell_pitch: CARD16 + bell_duration: CARD16 + led_value: BITMASK + global_auto_repeat: {AutoRepeatModeOn, AutoRepeatModeOff} + auto_repeats: LISTofCARD8] + + Those feedbacks that are equivalent to those reported for the + core pointer are in feedback class PtrFeedback and are reported + in the PtrFeedbackState structure. The members of that + structure are: + + CLASS Ptr: + [class: CARD8 + length: CARD16 + feedback id: CARD8 + accelNumerator: CARD16 + accelDenominator: CARD16 + threshold: CARD16] + + Some input devices provide a means of displaying an integer. + Those devices will support feedback class IntegerFeedback, + which is reported in the IntegerFeedbackState structure. The + members of that structure are: + + CLASS Integer: + [class: CARD8 + length: CARD16 + feedback id: CARD8 + resolution: CARD32 + min-val: INT32 + max-val: INT32] + + Some input devices provide a means of displaying a string. + Those devices will support feedback class StringFeedback, which + is reported in the StringFeedbackState structure. The members + of that structure are: + + CLASS String: + [class: CARD8 + length: CARD16 + feedback id: CARD8 + max_symbols: CARD16 + num_keysyms_supported: CARD16 + keysyms_supported: LISTofKEYSYM] + + Some input devices contain a bell. Those devices will support + feedback class BellFeedback, which is reported in the + BellFeedbackState structure. The members of that structure are: + + CLASS String: + [class: CARD8 + length: CARD16 + feedback id: CARD8 + percent: CARD8 + pitch: CARD16 + duration: CARD16] + + The percent sets the base volume for the bell between 0 (off) + and 100 (loud) inclusive, if possible. Setting to -1 restores + the default. Other negative values generate a Value error. + + The pitch sets the pitch (specified in Hz) of the bell, if + possible. Setting to -1 restores the default. Other negative + values generate a Value error. + + The duration sets the duration (specified in milliseconds) of + the bell, if possible. Setting to -1 restores the default. + Other negative values generate a Value error. + + A bell generator connected with the console but not directly on + the device is treated as if it were part of the device. Some + input devices contain LEDs. Those devices will support feedback + class Led, which is reported in the LedFeedbackState structure. + The members of that structure are: + + CLASS String: + [class: CARD8 + length: CARD16 + feedback id: CARD8 + led_mask: BITMASK + led_value: BITMASK] + + Each bit in led_mask indicates that the corresponding led is + supported by the feedback. At most 32 LEDs per feedback are + supported. No standard interpretation of LEDs is defined. + + This function will fail with a BadMatch error if the device + specified in the request does not support feedbacks. + + Errors: Device, Match + + To change the settings of a feedback on an extension device, + use ChangeFeedbackControl. + + ChangeFeedbackControl + device: DEVICE + feedbackid: CARD8 + value-mask: BITMASK + value: FEEDBACKCONTROL + FEEDBACKCONTROL: {KBDFEEDBACKCONTROL, + PTRFEEDBACKCONTROL, + INTEGERFEEDBACKCONTROL, + STRINGFEEDBACKCONTROL, + BELLFEEDBACKCONTROL, + LEDFEEDBACKCONTROL} + + Errors: Device, Match, Value + + Feedback controls are grouped by class. Those feedbacks that + are equivalent to those supported by the core keyboard are + controlled by feedback class KbdFeedbackClass using the + KbdFeedbackControl structure. The members of that structure + are: + + KBDFEEDBACKCTL + [class: CARD8 + length: CARD16 + feedback id: CARD8 + key_click_percent: INT8 + bell_percent: INT8 + bell_pitch: INT16 + bell_duration: INT16 + led_mask: INT32 + led_value: INT32 + key: KEYCODE + auto_repeat_mode: {AutoRepeatModeOn, AutoRepeatModeOff, + AutoRepeatModeDefault}] + + The key_click_percent sets the volume for key clicks between 0 + (off) and 100 (loud) inclusive, if possible. Setting to -1 + restores the default. Other negative values generate a Value + error. + + If both auto_repeat_mode and key are specified, then the + auto_repeat_mode of that key is changed, if possible. If only + auto_repeat_mode is specified, then the global auto-repeat mode + for the entire keyboard is changed, if possible, without + affecting the per-key settings. It is a Match error if a key is + specified without an auto_repeat_mode. + + The order in which controls are verified and altered is + server-dependent. If an error is generated, a subset of the + controls may have been altered. + + Those feedback controls equivalent to those of the core pointer + are controlled by feedback class PtrFeedbackClass using the + PtrFeedbackControl structure. The members of that structure are + as follows: + + PTRFEEDBACKCTL: + [class: CARD8 + length: CARD16 + feedback id: CARD8 + accelNumerator: INT16 + accelDenominator: INT16 + threshold: INT16] + + The acceleration, expressed as a fraction, is a multiplier for + movement. For example, specifying 3/1 means the device moves + three times as fast as normal. The fraction may be rounded + arbitrarily by the X server. Acceleration only takes effect if + the device moves more than threshold pixels at once and only + applies to the amount beyond the value in the threshold + argument. Setting a value to -1 restores the default. The + values of the do-accel and do-threshold arguments must be + nonzero for the device values to be set. Otherwise, the + parameters will be unchanged. Negative values generate a Value + error, as does a zero value for the accel-denominator argument. + + Some devices are capable of displaying an integer. This is done + using feedback class IntegerFeedbackClass using the + IntegerFeedbackControl structure. The members of that structure + are as follows: + + INTEGERCTL: + [class: CARD8 + length: CARD16 + feedback id: CARD8 + int_to_display: INT32] + + Some devices are capable of displaying an string. This is done + using feedback class StringFeedbackClass using the + StringFeedbackCtl structure. The members of that structure are + as follows: + + STRINGCTL: + [class: CARD8 + length: CARD16 + feedback id: CARD8 + syms_to_display: LISTofKEYSYMS] + + Some devices contain a bell. This is done using feedback class + BellFeedbackClass using the BellFeedbackControl structure. The + members of that structure are as follows: + + BELLCTL: + [class: CARD8 + length: CARD16 + feedback id: CARD8 + percent: INT8 + pitch: INT16 + duration: INT16] + + Some devices contain leds. These can be turned on and off using + the LedFeedbackControl structure. The members of that structure + are as follows: + + LEDCTL: + [class: CARD8 + length: CARD16 + feedback id: CARD8 + led_mask: BITMASK + led_value: BITMASK] + + Errors: Device, Match, Value + +2.20 Ringing a Bell on an Input Device + + To ring a bell on an extension input device, use DeviceBell. + + DeviceBell: + device: DEVICE + feedbackclass: CARD8 + feedbackid: CARD8 + percent: INT8 + + Errors: Device, Value + + This request is analogous to the core Bell request. It rings + the specified bell on the specified input device feedback, + using the specified volume. The specified volume is relative to + the base volume for the feedback. If the value for the percent + argument is not in the range -100 to 100 inclusive, a Value + error results. The volume at which the bell rings when the + percent argument is nonnegative is: + + base - [(base * percent) / 100] + percent + + The volume at which the bell rings when the percent argument is + negative is: + + base + [(base * percent) / 100] + + To change the base volume of the bell, use + ChangeFeedbackControl request. + +Controlling Device Encoding + + To get the keyboard mapping of an extension device that has + keys, use GetDeviceKeyMapping. + + GetDeviceKeyMapping + device: DEVICE + first-keycode: KEYCODE + count: CARD8 + => + keysyms-per-keycode: CARD8 + keysyms: LISTofKEYSYM + + Errors: Device, Match, Value + + This request returns the symbols for the specified number of + keycodes for the specified extension device, starting with the + specified keycode. The first-keycode must be greater than or + equal to min-keycode as returned in the connection setup (else + a Value error), and + + first-keycode + count - 1 + + must be less than or equal to max-keycode as returned in the + connection setup (else a Value error). The number of elements + in the keysyms list is + + count * keysyms-per-keycode + + and KEYSYM number N (counting from zero) for keycode K has an + index (counting from zero) of + + (K - first-keycode) * keysyms-per-keycode + N + + in keysyms. The keysyms-per-keycode value is chosen arbitrarily + by the server to be large enough to report all requested + symbols. A special KEYSYM value of NoSymbol is used to fill in + unused elements for individual keycodes. + + If the specified device has not first been opened by this + client via OpenDevice, or if that device does not support input + class Keys, this request will fail with a Device error. + + To change the keyboard mapping of an extension device that has + keys, use ChangeDeviceKeyMapping. + + ChangeDeviceKeyMapping + device: DEVICE + first-keycode: KEYCODE + keysyms-per-keycode: CARD8 + keysyms: LISTofKEYSYM + num_codes: CARD8 + + Errors: Device, Match, Value, Alloc + + This request is analogous to the core ChangeKeyMapping request. + It defines the symbols for the specified number of keycodes for + the specified extension device. If the specified device has not + first been opened by this client via OpenDevice, or if that + device does not support input class Keys, this request will + fail with a Device error. + + The number of elements in the keysyms list must be a multiple + of keysyms_per_keycode. Otherwise, ChangeDeviceKeyMapping + generates a Length error. The specified first_keycode must be + greater than or equal to the min_keycode value returned by the + ListInputDevices request, or this request will fail with a + Value error. In addition, if the following expression is not + less than the max_keycode value returned by the + ListInputDevices request, the request will fail with a Value + error: + + first_keycode + (num_codes / keysyms_per_keycode) - 1 + + To obtain the keycodes that are used as modifiers on an + extension device that has keys, use GetDeviceModifierMapping. + + GetDeviceModifierMapping + device: DEVICE + => + keycodes-per-modifier: CARD8 + keycodes: LISTofKEYCODE + + Errors: Device, Match + + This request is analogous to the core GetModifierMapping + request. This request returns the keycodes of the keys being + used as modifiers. The number of keycodes in the list is + 8*keycodes-per-modifier. The keycodes are divided into eight + sets, with each set containing keycodes-per-modifier elements. + The sets are assigned in order to the modifiers Shift, Lock, + Control, Mod1, Mod2, Mod3, Mod4, and Mod5. The + keycodes-per-modifier value is chosen arbitrarily by the + server; zeroes are used to fill in unused elements within each + set. If only zero values are given in a set, the use of the + corresponding modifier has been disabled. The order of keycodes + within each set is chosen arbitrarily by the server. + + To set which keycodes that are to be used as modifiers for an + extension device, use SetDeviceModifierMapping. + + SetDeviceModifierMapping + device: DEVICE + keycodes-per-modifier: CARD8 + keycodes: LISTofKEYCODE + => + status: {Success, Busy, Failed} + + Errors: Device, Match, Value, Alloc + + This request is analogous to the core SetModifierMapping + request. This request specifies the keycodes (if any) of the + keys to be used as modifiers. The number of keycodes in the + list must be 8*keycodes-per-modifier (else a Length error). The + keycodes are divided into eight sets, with the sets, with each + set containing keycodes-per-modifier elements. The sets are + assigned in order to the modifiers Shift, Lock, Control, Mod1, + Mod2, Mod3, Mod4, and Mod5. Only non-zero keycode values are + used within each set; zero values are ignored. All of the + non-zero keycodes must be in the range specified by min-keycode + and max-keycode in the ListInputDevices request (else a Value + error). The order of keycodes within a set does not matter. If + no non-zero values are specified in a set, the use of the + corresponding modifier is disabled, and the modifier bit will + always be zero. Otherwise, the modifier bit will be one + whenever at least one of the keys in the corresponding set is + in the down position. + + A server can impose restrictions on how modifiers can be + changed (for example, if certain keys do not generate up + transitions in hardware or if multiple keys per modifier are + not supported). The status reply is Failed if some such + restriction is violated, and none of the modifiers are changed. + + If the new non-zero keycodes specified for a modifier differ + from those currently defined, and any (current or new) keys for + that modifier are logically in the down state, then the status + reply is Busy, and none of the modifiers are changed. + + This request generates a DeviceMappingNotify event on a Success + status. The DeviceMappingNotify event will be sent only to + those clients that have expressed an interest in receiving that + event via the XSelectExtensionEvent request. + + A X server can impose restrictions on how modifiers can be + changed, for example, if certain keys do not generate up + transitions in hardware or if multiple modifier keys are not + supported. If some such restriction is violated, the status + reply is MappingFailed , and none of the modifiers are changed. + If the new keycodes specified for a modifier differ from those + currently defined and any (current or new) keys for that + modifier are in the logically down state, the status reply is + MappingBusy, and none of the modifiers are changed. + +2.20 Controlling Button Mapping + + These requests are analogous to the core GetPointerMapping and + ChangePointerMapping requests. They allow a client to determine + the current mapping of buttons on an extension device, and to + change that mapping. + + To get the current button mapping for an extension device, use + GetDeviceButtonMapping. + + GetDeviceButtonMapping + device: DEVICE + nmap: CARD8 + => + map_return: LISTofCARD8 + + Errors: Device, Match + + The GetDeviceButtonMapping function returns the current mapping + of the buttons on the specified device. Elements of the list + are indexed starting from one. The length of the list indicates + the number of physical buttons. The nominal mapping is the + identity mapping map[i]=i. + + nmap indicates the number of elements in the map_return array. + Only the first nmap entries will be copied by the library into + the map_return array. + + To set the button mapping for an extension device, use + SetDeviceButtonMapping. + + SetDeviceButtonMapping + device: DEVICE + map: LISTofCARD8 + nmap: CARD8 + => + status: CARD8 + + Errors: Device, Match, Value + + The SetDeviceButtonMapping function sets the mapping of the + specified device and causes the X server to generate a + DeviceMappingNotify event on a status of MappingSuccess. + Elements of the list are indexed starting from one. The length + of the list, specified in nmap, must be the same as + GetDeviceButtonMapping would return. Otherwise, + SetDeviceButtonMapping generates a Value error. A zero element + disables a button, and elements are not restricted in value by + the number of physical buttons. If any of the buttons to be + altered are in the down state, the status reply is MappingBusy + and the mapping is not changed. + + In servers supporting XI 1.x, no two elements can have the same + nonzero value. Otherwise, this function generates a Value + error. + +2.21 Obtaining The State Of A Device + + To obtain vectors that describe the state of the keys, buttons + and valuators of an extension device, use QueryDeviceState. + + QueryDeviceState + device: DEVICE + => + device-id: CARD8 + data: LISTofINPUTCLASS + + where + + INPUTCLASS: {VALUATOR, BUTTON, KEY} + CLASS VALUATOR: + [class: CARD8 + num_valuators: CARD8 + mode: CARD8 + #x01 device mode (0 = Relative, 1 = Absolute) + #x02 proximity state (0 = InProximity, 1 = OutOfProximity) + valuators: LISTofINT32] + CLASS BUTTON: + [class: CARD8 + num_buttons: CARD8 + buttons: LISTofCARD8] + CLASS KEY: + [class: CARD8 + num_keys: CARD8 + keys: LISTofCARD8] + + Errors: Device + + The QueryDeviceState request returns the current logical state + of the buttons, keys, and valuators on the specified input + device. The buttons and keys arrays, byte N (from 0) contains + the bits for key or button 8N to 8N+7 with the least + significant bit in the byte representing key or button 8N. + + If the device has valuators, a bit in the mode field indicates + whether the device is reporting Absolute or Relative data. If + it is reporting Absolute data, the valuators array will contain + the current value of the valuators. If it is reporting Relative + data, the valuators array will contain undefined data. + + If the device reports proximity information, a bit in the mode + field indicates whether the device is InProximity or + OutOfProximity. + +2.22 Listing Device Properties + + Introduced with XI 1.5 + + ListDeviceProperties + deviceid: CARD8 + => + nAtoms: CARD16 + Atoms: LISTofATOM + + Errors: Device + + Each device can store an arbitrary number of properties. These + properties can be allocated by either the client or the driver. + The client can change device properties and the server + guarantees that the device driver is notified about a change of + the device's properties. + + ListDeviceProperties returns all properties of a device. The + client is expected to retrieve details about the properties it + is interested in separately. + +2.23 Getting a Device Property + + Introduced with XI 1.5 + + GetDeviceProperty: + property: ATOM + type: ATOM + longOffset: CARD32 + longLength: CARD32 + deviceid: CARD8 + delete: BOOL + => + propertyType: ATOM + bytesAfter: CARD32 + nItems: CARD32 + format: CARD8 + deviceid: CARD8 + data: [LISTofCARD8] + + Errors: Atom, Device, Value, Access + + Retrieve the value for a property. If the property does not + exist, propertyType is None and all other fields are undefined. + + If type is not AnyPropertyType and does not match the + property's actual type, the propertyType, bytesAfter, and + format are returned but not the actual data. + + longOffset and longLength specify the offset and length + respectively in 32-bit multiples of the data to retrieve. + + If delete is True, the property is deleted after querying its + data. If the property cannot be deleted, a BadAccess error is + returned. + + propertyType returns the atom identifier that defines the + actual type of the property. + + If bytesAfter is non-zero, it specifies the number of data + 4-byte units after the retrieved chunk of data. + + format specifies whether the data should be viewed as a list of + 8-bit, 16-bit, or 32-bit quantities. Possible values are 8, 16, + and 32. This information allows the X server to correctly + perform byte-swap operations as necessary. + + nItem specifies the number of 8-bit, 16-bit, or 32-bit items + returned after the request. + +2.24 Changing a Device Property + + Introduced with XI 1.5 + + ChangeDeviceProperty: + property: ATOM + type: ATOM + deviceid: CARD8 + format: CARD8 + mode: CARD8 + nUnits: CARD32 + + Errors: Atom, Device, Value, Match, Access + + Changes the value of a specified property. + + The type specifies the atom identifier that defines the type of + the property. If mode is not PropModeReplace, the type must + match the current type of the property or a BadMatch error is + returned. + + format specifies whether the data should be viewed as a list of + 8-bit, 16-bit, or 32-bit quantities. Possible values are 8, 16, + and 32. This information allows the X server to correctly + perform byte-swap operations as necessary. + + If mode is PropModeReplace, a preexising value for this + property is replaced with the new value. If mode is + PropModePrepend or PropModeAppend, the value is prepended or + appended, respectively, to the current value of the property. + + nUnits specifies the number of 8-bit, 16-bit, or 32-bit items + supplied after the reply. + + Changing a device property results in a + DevicePropertyNotifyEvent being sent to all clients. + +2.25 Deleting a Device Property + + Introduced with XI 1.5 + + DeleteDeviceProperty: + property: ATOM + deviceid: CARD8 + + Errors: Atom, Device, Match, Access. + + Deletes the specified property. If the property cannot be + deleted by the client, a BadAccess error is returned. + +3. Events + + The input extension creates input events analogous to the core + input events. These extension input events are generated by + manipulating one of the extension input devices. + +3.1 Button, Key, and Motion Events + + DeviceKeyPress + DeviceKeyRelease + DeviceButtonPress, + DeviceButtonRelease + DeviceMotionNotify + device: CARD8 + root, event: WINDOW + child: Window or None + same-screen: BOOL + root-x, root-y, event-x, event-y: INT16 + detail: <see below> + state: SETofKEYBUTMASK + time: TIMESTAMP + + These events are generated when a key, button, or valuator + logically changes state. The generation of these logical + changes may lag the physical changes, if device event + processing is frozen. Note that DeviceKeyPress and + DeviceKeyRelease are generated for all keys, even those mapped + to modifier bits. The “source” of the event is the window the + pointer is in. The window with respect to which the event is + normally reported is found by looking up the hierarchy + (starting with the source window) for the first window on which + any client has selected interest in the event. The actual + window used for reporting can be modified by active grabs and + by the focus window.The window the event is reported with + respect to is called the “event” window. + + The root is the root window of the “source” window, and root-x + and root-y are the pointer coordinates relative to root's + origin at the time of the event. Event is the “event” window. + If the event window is on the same screen as root, then event-x + and event-y are the pointer coordinates relative to the event + window's origin. Otherwise, event-x and event-y are zero. If + the source window is an inferior of the event window, then + child is set to the child of the event window that is an + ancestor of (or is) the source window. Otherwise, it is set to + None. + + The state component gives the logical state of the buttons on + the X pointer and modifier keys on the core X keyboard just + before the event. + + The detail component type varies with the event type: + Event Component + DeviceKeyPress KEYCODE + DeviceKeyRelease KEYCODE + DeviceButtonPress BUTTON + DeviceButtonRelease BUTTON + DeviceMotionNotify { Normal , Hint } + + The granularity of motion events is not guaranteed, but a + client selecting for motion events is guaranteed to get at + least one event when a valuator changes. If DeviceMotionHint is + selected, the server is free to send only one + DeviceMotionNotify event (with detail Hint) to the client for + the event window, until either a key or button changes state, + the pointer leaves the event window, or the client issues a + QueryDeviceState or GetDeviceMotionEvents request. + +3.2 DeviceValuator Event + + DeviceValuator + device: CARD8 + device_state: SETofKEYBUTMASK + num_valuators: CARD8 + first_valuator: CARD8 + valuators: LISTofINT32 + + DeviceValuator events are generated to contain valuator + information for which there is insufficient space in DeviceKey, + DeviceButton, DeviceMotion, and Proximity wire events. For + events of these types, a second event of type DeviceValuator + follows immediately. The library combines these events into a + single event that a client can receive via XNextEvent. + DeviceValuator events are not selected for by clients, they + only exist to contain information that will not fit into some + event selected by clients. + + The device_state component gives the state of the buttons and + modifiers on the device generating the event. + + Extension motion devices may report motion data for a variable + number of axes. The valuators array contains the values of all + axes reported by the device. If more than 6 axes are reported, + more than one DeviceValuator event will be sent by the server, + and more than one DeviceKey, DeviceButton, DeviceMotion, or + Proximity event will be reported by the library. Clients should + examine the corresponding fields of the event reported by the + library to determine the total number of axes reported, and the + first axis reported in the current event. Axes are numbered + beginning with zero. + + For Button, Key and Motion events on a device reporting + absolute motion data the current value of the device's + valuators is reported. For devices that report relative data, + Button and Key events may be followed by a DeviceValuator event + that contains 0s in the num_valuators field. In this case, only + the device_state component will have meaning. + +3.3 Device Focus Events + + DeviceFocusIn + DeviceFocusOut + device: CARD8 + time: TIMESTAMP + event: WINDOW + mode: { Normal, WhileGrabbed, Grab, Ungrab} + detail: { Ancestor, Virtual, Inferior, Nonlinear, + NonlinearVirtual, Pointer, PointerRoot, None} + + These events are generated when the input focus changes and are + reported to clients selecting DeviceFocusChange for the + specified device and window. Events generated by SetDeviceFocus + when the device is not grabbed have mode Normal. Events + generated by SetDeviceFocus when the device is grabbed have + mode WhileGrabbed. Events generated when a device grab actives + have mode Grab, and events generated when a device grab + deactivates have mode Ungrab. + + All DeviceFocusOut events caused by a window unmap are + generated after any UnmapNotify event, but the ordering of + DeviceFocusOut with respect to generated EnterNotify, + LeaveNotify, VisibilityNotify and Expose events is not + constrained. + + DeviceFocusIn and DeviceFocusOut events are generated for focus + changes of extension devices in the same manner as focus events + for the core devices are generated. + +3.4 Device State Notify Event + + DeviceStateNotify + time: TIMESTAMP + device: CARD8 + num_keys: CARD8 + num_buttons: CARD8 + num_valuators: CARD8 + classes_reported: CARD8 {SetOfDeviceMode | SetOfInputClass} + SetOfDeviceMode: + #x80 ProximityState 0 = InProxmity, 1 = OutOfProximity + #x40 Device Mode (0 = Relative, 1 = Absolute) + SetOfInputClass: #x04 reporting valuators + #x02 reporting buttons + #x01 reporting keys + buttons: LISTofCARD8 + keys: LISTofCARD8 + valuators: LISTofCARD32 + + This event reports the state of the device just as in the + QueryDeviceState request. This event is reported to clients + selecting DeviceStateNotify for the device and window and is + generated immediately after every EnterNotify and + DeviceFocusIn. If the device has no more than 32 buttons, no + more than 32 keys, and no more than 3 valuators, This event can + report the state of the device. If the device has more than 32 + buttons, the event will be immediately followed by a + DeviceButtonStateNotify event. If the device has more than 32 + keys, the event will be followed by a DeviceKeyStateNotify + event. If the device has more than 3 valuators, the event will + be followed by one or more DeviceValuator events. + +3.5 Device KeyState and ButtonState Notify Events + + DeviceKeyStateNotify + device: CARD8 + keys: LISTofCARD8 + DeviceButtonStateNotify + device: CARD8 + buttons: LISTofCARD8 + + These events contain information about the state of keys and + buttons on a device that will not fit into the + DeviceStateNotify wire event. These events are not selected by + clients, rather they may immediately follow a DeviceStateNotify + wire event and be combined with it into a single + DeviceStateNotify client event that a client may receive via + XNextEvent. + +3.6 DeviceMappingNotify Event + + DeviceMappingNotify + time: TIMESTAMP + device: CARD8 + request: CARD8 + first_keycode: CARD8 + count: CARD8 + + This event reports a change in the mapping of keys, modifiers, + or buttons on an extension device. This event is reported to + clients selecting DeviceMappingNotify for the device and window + and is generated after every client SetDeviceButtonMapping, + ChangeDeviceKeyMapping, or ChangeDeviceModifierMapping request. + +3.7 ChangeDeviceNotify Event + + ChangeDeviceNotify + device: CARD8 + time: TIMESTAMP + request: CARD8 + + This event reports a change in the physical device being used + as the core X keyboard or X pointer device. ChangeDeviceNotify + events are reported to clients selecting ChangeDeviceNotify for + the device and window and is generated after every client + ChangeKeyboardDevice or ChangePointerDevice request. + +3.7 Proximity Events + + ProximityIn + ProximityOut + device: CARD8 + root, event: WINDOW + child: Window or None + same-screen: BOOL + root-x, root-y, event-x, event-y: INT16 + state: SETofKEYBUTMASK + time: TIMESTAMP + device-state: SETofKEYBUTMASK + axis-count: CARD8 + first-axis: CARD8 + axis-data: LISTofINT32 + + These events are generated by some devices (such as graphics + tablets or touchscreens) to indicate that a stylus has moved + into or out of contact with a positional sensing surface. + + The “source” of the event is the window the pointer is in. The + window with respect to which the event is normally reported is + found by looking up the hierarchy (starting with the source + window) for the first window on which any client has selected + interest in the event. The actual window used for reporting can + be modified by active grabs and by the focus window.The window + the event is reported with respect to is called the “event” + window. + + The root is the root window of the “source” window, and root-x + and root-y are the pointer coordinates relative to root's + origin at the time of the event. Event is the “event” window. + If the event window is on the same screen as root, then event-x + and event-y are the pointer coordinates relative to the event + window's origin. Otherwise, event-x and event-y are zero. If + the source window is an inferior of the event window, then + child is set to the child of the event window that is an + ancestor of (or is) the source window. Otherwise, it is set to + None. The state component gives the logical state of the + buttons on the core X pointer and modifier keys on the core X + keyboard just before the event. The device-state component + gives the state of the buttons and modifiers on the device + generating the event. + +3.8 DevicePresenceEvents + + Introduced with XI 1.4. + + DevicePresence + time: TIMESTAMP + devchange: BYTE + #x00: DeviceAdded + #x01: DeviceRemoved + #x02: DeviceEnabled + #x03: DeviceDisabled + #x04: DeviceUnrecoverable + #x05: DeviceControlChanged + deviceid: BYTE + control: CARD16 + + DevicePresence events are sent when the server adds or removes, + or enables or disables an input device. The client is expected + to query the server for the list of input devices using the + ListInputDevices request to obtain the updated list of input + devices. DevicePresence events are also sent when a control on + the device has been changed. + + The devchange field specifies the type of operation. In case of + DeviceAdded, a new device has been added to the server, but + this device does not yet send events. If devchange is set to + DeviceEnabled, the device is enabled and will generate events. + If the field is DeviceDisabled or DeviceRemoved, the given + device is disabled and stops sending events or was removed from + the server, respectively. If the field is DeviceUnrecoverable, + an IO-error has occured on the device and the device is + forcibly disabled and removed by the server. If devchange is + DeviceControlChanged, control specifies the type of control + that has been changed. + +3.9 DevicePropertyNotifyEvent + + Introduced with XI 1.5. + + DevicePropertyNotifyEvent + deviceid: CARD8 + state: CARD8 + time: TIMESTAMP + atom: ATOM + + A DevicePropertyNotifyEvent is sent to all clients when a + property on the device is created, deleted, or changes value. + + The deviceid specifies the device which's property has been + modified. + + The atom specifies the named identifier of the property that + has been altered. + + If state is PropertyNewValue, the given property has a new + value or has been newly created. If state is PropertyDeleted, + the given property has been deleted. diff --git a/X11/extensions/compositeproto.h b/X11/extensions/compositeproto.h index c57628c9d..2e392e2eb 100644 --- a/X11/extensions/compositeproto.h +++ b/X11/extensions/compositeproto.h @@ -51,6 +51,7 @@ #define Window CARD32 #define Region CARD32 +#define Pixmap CARD32 /* * requests and replies @@ -187,5 +188,6 @@ typedef struct { #undef Window #undef Region +#undef Pixmap #endif /* _COMPOSITEPROTO_H_ */ |