diff options
Diffstat (limited to 'fontconfig/doc/fcconfig.fncs')
| -rw-r--r-- | fontconfig/doc/fcconfig.fncs | 746 |
1 files changed, 373 insertions, 373 deletions
diff --git a/fontconfig/doc/fcconfig.fncs b/fontconfig/doc/fcconfig.fncs index fb55adece..6a8c8183d 100644 --- a/fontconfig/doc/fcconfig.fncs +++ b/fontconfig/doc/fcconfig.fncs @@ -1,373 +1,373 @@ -/* - * fontconfig/doc/fcconfig.fncs - * - * Copyright © 2003 Keith Packard - * - * Permission to use, copy, modify, distribute, and sell this software and its - * documentation for any purpose is hereby granted without fee, provided that - * the above copyright notice appear in all copies and that both that - * copyright notice and this permission notice appear in supporting - * documentation, and that the name of the author(s) not be used in - * advertising or publicity pertaining to distribution of the software without - * specific, written prior permission. The authors make no - * representations about the suitability of this software for any purpose. It - * is provided "as is" without express or implied warranty. - * - * THE AUTHOR(S) DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE, - * INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO - * EVENT SHALL THE AUTHOR(S) BE LIABLE FOR ANY SPECIAL, INDIRECT OR - * CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, - * DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER - * TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR - * PERFORMANCE OF THIS SOFTWARE. - */ -@RET@ FcConfig * -@FUNC@ FcConfigCreate -@TYPE1@ void -@PURPOSE@ Create a configuration -@DESC@ -Creates an empty configuration. -@@ - -@RET@ FcConfig * -@FUNC@ FcConfigReference -@TYPE1@ FcConfig * @ARG1@ config -@PURPOSE@ Increment config reference count -@DESC@ -Add another reference to <parameter>config</parameter>. Configs are freed only -when the reference count reaches zero. -If <parameter>config</parameter> is NULL, the current configuration is used. -In that case this function will be similar to FcConfigGetCurrent() except that -it increments the reference count before returning and the user is responsible -for destroying the configuration when not needed anymore. -@@ - -@RET@ void -@FUNC@ FcConfigDestroy -@TYPE1@ FcConfig * @ARG1@ config -@PURPOSE@ Destroy a configuration -@DESC@ -Decrements the config reference count. If all references are gone, destroys -the configuration and any data associated with it. -Note that calling this function with the return from FcConfigGetCurrent will -cause a new configuration to be created for use as current configuration. -@@ - -@RET@ FcBool -@FUNC@ FcConfigSetCurrent -@TYPE1@ FcConfig * @ARG1@ config -@PURPOSE@ Set configuration as default -@DESC@ -Sets the current default configuration to <parameter>config</parameter>. Implicitly calls -FcConfigBuildFonts if necessary, returning FcFalse if that call fails. -@@ - -@RET@ FcConfig * -@FUNC@ FcConfigGetCurrent -@TYPE1@ void -@PURPOSE@ Return current configuration -@DESC@ -Returns the current default configuration. -@@ - -@RET@ FcBool -@FUNC@ FcConfigUptoDate -@TYPE1@ FcConfig * @ARG1@ config -@PURPOSE@ Check timestamps on config files -@DESC@ -Checks all of the files related to <parameter>config</parameter> and returns -whether any of them has been modified since the configuration was created. -If <parameter>config</parameter> is NULL, the current configuration is used. -@@ - -@RET@ FcChar8 * -@FUNC@ FcConfigHome -@TYPE1@ void -@PURPOSE@ return the current home directory. -@DESC@ -Return the current user's home directory, if it is available, and if using it -is enabled, and NULL otherwise. -See also <function>FcConfigEnableHome</function>). -@@ - -@RET@ FcBool -@FUNC@ FcConfigEnableHome -@TYPE1@ FcBool% @ARG1@ enable -@PURPOSE@ controls use of the home directory. -@DESC@ -If <parameter>enable</parameter> is FcTrue, then Fontconfig will use various -files which are specified relative to the user's home directory (using the ~ -notation in the configuration). When <parameter>enable</parameter> is -FcFalse, then all use of the home directory in these contexts will be -disabled. The previous setting of the value is returned. -@@ - -@RET@ FcBool -@FUNC@ FcConfigBuildFonts -@TYPE1@ FcConfig * @ARG1@ config -@PURPOSE@ Build font database -@DESC@ -Builds the set of available fonts for the given configuration. Note that -any changes to the configuration after this call have indeterminate effects. -Returns FcFalse if this operation runs out of memory. -If <parameter>config</parameter> is NULL, the current configuration is used. -@@ - -@RET@ FcStrList * -@FUNC@ FcConfigGetConfigDirs -@TYPE1@ FcConfig * @ARG1@ config -@PURPOSE@ Get config directories -@DESC@ -Returns the list of font directories specified in the configuration files -for <parameter>config</parameter>. Does not include any subdirectories. -If <parameter>config</parameter> is NULL, the current configuration is used. -@@ - -@RET@ FcStrList * -@FUNC@ FcConfigGetFontDirs -@TYPE1@ FcConfig * @ARG1@ config -@PURPOSE@ Get font directories -@DESC@ -Returns the list of font directories in <parameter>config</parameter>. This includes the -configured font directories along with any directories below those in the -filesystem. -If <parameter>config</parameter> is NULL, the current configuration is used. -@@ - -@RET@ FcStrList * -@FUNC@ FcConfigGetConfigFiles -@TYPE1@ FcConfig * @ARG1@ config -@PURPOSE@ Get config files -@DESC@ -Returns the list of known configuration files used to generate <parameter>config</parameter>. -If <parameter>config</parameter> is NULL, the current configuration is used. -@@ - -@RET@ FcChar8 * -@FUNC@ FcConfigGetCache -@TYPE1@ FcConfig * @ARG1@ config -@PURPOSE@ DEPRECATED used to return per-user cache filename -@DESC@ -With fontconfig no longer using per-user cache files, this function now -simply returns NULL to indicate that no per-user file exists. -@@ - -@RET@ FcStrList * -@FUNC@ FcConfigGetCacheDirs -@TYPE1@ FcConfig * @ARG1@ config -@PURPOSE@ return the list of directories searched for cache files -@DESC@ -<function>FcConfigGetCacheDirs</function> returns a string list containing -all of the directories that fontconfig will search when attempting to load a -cache file for a font directory. -If <parameter>config</parameter> is NULL, the current configuration is used. -@@ - -@RET@ FcFontSet * -@FUNC@ FcConfigGetFonts -@TYPE1@ FcConfig * @ARG1@ config -@TYPE2@ FcSetName% @ARG2@ set -@PURPOSE@ Get config font set -@DESC@ -Returns one of the two sets of fonts from the configuration as specified -by <parameter>set</parameter>. This font set is owned by the library and must -not be modified or freed. -If <parameter>config</parameter> is NULL, the current configuration is used. -@@ - -@RET@ FcBlanks * -@FUNC@ FcConfigGetBlanks -@TYPE1@ FcConfig * @ARG1@ config -@PURPOSE@ Get config blanks -@DESC@ -Returns the FcBlanks object associated with the given configuration, if no -blanks were present in the configuration, this function will return 0. -The returned FcBlanks object if not NULL, is valid as long as the owning -FcConfig is alive. -If <parameter>config</parameter> is NULL, the current configuration is used. -@@ - -@RET@ int -@FUNC@ FcConfigGetRescanInterval -@TYPE1@ FcConfig * @ARG1@ config -@PURPOSE@ Get config rescan interval -@DESC@ -Returns the interval between automatic checks of the configuration (in -seconds) specified in <parameter>config</parameter>. The configuration is checked during -a call to FcFontList when this interval has passed since the last check. -An interval setting of zero disables automatic checks. -If <parameter>config</parameter> is NULL, the current configuration is used. -@@ - -@RET@ FcBool -@FUNC@ FcConfigSetRescanInterval -@TYPE1@ FcConfig * @ARG1@ config -@TYPE2@ int% @ARG2@ rescanInterval -@PURPOSE@ Set config rescan interval -@DESC@ -Sets the rescan interval. Returns FcFalse if the interval cannot be set (due -to allocation failure). Otherwise returns FcTrue. -An interval setting of zero disables automatic checks. -If <parameter>config</parameter> is NULL, the current configuration is used. -@@ - -@RET@ FcBool -@FUNC@ FcConfigAppFontAddFile -@TYPE1@ FcConfig * @ARG1@ config -@TYPE2@ const FcChar8 * @ARG2@ file -@PURPOSE@ Add font file to font database -@DESC@ -Adds an application-specific font to the configuration. Returns FcFalse -if the fonts cannot be added (due to allocation failure). Otherwise returns FcTrue. -If <parameter>config</parameter> is NULL, the current configuration is used. -@@ - -@RET@ FcBool -@FUNC@ FcConfigAppFontAddDir -@TYPE1@ FcConfig * @ARG1@ config -@TYPE2@ const FcChar8 * @ARG2@ dir -@PURPOSE@ Add fonts from directory to font database -@DESC@ -Scans the specified directory for fonts, adding each one found to the -application-specific set of fonts. Returns FcFalse -if the fonts cannot be added (due to allocation failure). Otherwise returns FcTrue. -If <parameter>config</parameter> is NULL, the current configuration is used. -@@ - -@RET@ void -@FUNC@ FcConfigAppFontClear -@TYPE1@ FcConfig * @ARG1@ config -@PURPOSE@ Remove all app fonts from font database -@DESC@ -Clears the set of application-specific fonts. -If <parameter>config</parameter> is NULL, the current configuration is used. -@@ - -@RET@ FcBool -@FUNC@ FcConfigSubstituteWithPat -@TYPE1@ FcConfig * @ARG1@ config -@TYPE2@ FcPattern * @ARG2@ p -@TYPE3@ FcPattern * @ARG3@ p_pat -@TYPE4@ FcMatchKind% @ARG4@ kind -@PURPOSE@ Execute substitutions -@DESC@ -Performs the sequence of pattern modification operations, if <parameter>kind</parameter> is -FcMatchPattern, then those tagged as pattern operations are applied, else -if <parameter>kind</parameter> is FcMatchFont, those tagged as font operations are applied and -p_pat is used for <test> elements with target=pattern. Returns FcFalse -if the substitution cannot be performed (due to allocation failure). Otherwise returns FcTrue. -If <parameter>config</parameter> is NULL, the current configuration is used. -@@ - -@RET@ FcBool -@FUNC@ FcConfigSubstitute -@TYPE1@ FcConfig * @ARG1@ config -@TYPE2@ FcPattern * @ARG2@ p -@TYPE3@ FcMatchKind% @ARG3@ kind -@PURPOSE@ Execute substitutions -@DESC@ -Calls FcConfigSubstituteWithPat setting p_pat to NULL. Returns FcFalse -if the substitution cannot be performed (due to allocation failure). Otherwise returns FcTrue. -If <parameter>config</parameter> is NULL, the current configuration is used. -@@ - -@RET@ FcPattern * -@FUNC@ FcFontMatch -@TYPE1@ FcConfig * @ARG1@ config -@TYPE2@ FcPattern * @ARG2@ p -@TYPE3@ FcResult * @ARG3@ result -@PURPOSE@ Return best font -@DESC@ -Finds the font in <parameter>sets</parameter> most closely matching -<parameter>pattern</parameter> and returns the result of -<function>FcFontRenderPrepare</function> for that font and the provided -pattern. This function should be called only after -<function>FcConfigSubstitute</function> and -<function>FcDefaultSubstitute</function> have been called for -<parameter>p</parameter>; otherwise the results will not be correct. -If <parameter>config</parameter> is NULL, the current configuration is used. -@@ - -@RET@ FcFontSet * -@FUNC@ FcFontSort -@TYPE1@ FcConfig * @ARG1@ config -@TYPE2@ FcPattern * @ARG2@ p -@TYPE3@ FcBool% @ARG3@ trim -@TYPE4@ FcCharSet ** @ARG4@ csp -@TYPE5@ FcResult * @ARG5@ result -@PURPOSE@ Return list of matching fonts -@DESC@ -Returns the list of fonts sorted by closeness to <parameter>p</parameter>. If <parameter>trim</parameter> is FcTrue, -elements in the list which don't include Unicode coverage not provided by -earlier elements in the list are elided. The union of Unicode coverage of -all of the fonts is returned in <parameter>csp</parameter>, if <parameter>csp</parameter> is not NULL. This function -should be called only after FcConfigSubstitute and FcDefaultSubstitute have -been called for <parameter>p</parameter>; otherwise the results will not be correct. - </para><para> -The returned FcFontSet references FcPattern structures which may be shared -by the return value from multiple FcFontSort calls, applications must not -modify these patterns. Instead, they should be passed, along with <parameter>p</parameter> to -<function>FcFontRenderPrepare</function> which combines them into a complete pattern. - </para><para> -The FcFontSet returned by FcFontSort is destroyed by calling FcFontSetDestroy. -If <parameter>config</parameter> is NULL, the current configuration is used. -@@ - -@RET@ FcPattern * -@FUNC@ FcFontRenderPrepare -@TYPE1@ FcConfig * @ARG1@ config -@TYPE2@ FcPattern * @ARG2@ pat -@TYPE3@ FcPattern * @ARG3@ font -@PURPOSE@ Prepare pattern for loading font file -@DESC@ -Creates a new pattern consisting of elements of <parameter>font</parameter> not appearing -in <parameter>pat</parameter>, elements of <parameter>pat</parameter> not appearing in <parameter>font</parameter> and the best matching -value from <parameter>pat</parameter> for elements appearing in both. The result is passed to -FcConfigSubstituteWithPat with <parameter>kind</parameter> FcMatchFont and then returned. -@@ - -@RET@ FcFontSet * -@FUNC@ FcFontList -@TYPE1@ FcConfig * @ARG1@ config -@TYPE2@ FcPattern * @ARG2@ p -@TYPE3@ FcObjectSet * @ARG3@ os -@PURPOSE@ List fonts -@DESC@ -Selects fonts matching <parameter>p</parameter>, creates patterns from those fonts containing -only the objects in <parameter>os</parameter> and returns the set of unique such patterns. -If <parameter>config</parameter> is NULL, the default configuration is checked -to be up to date, and used. -@@ - -@RET@ FcChar8 * -@FUNC@ FcConfigFilename -@TYPE1@ const FcChar8 * @ARG1@ name -@PURPOSE@ Find a config file -@DESC@ -Given the specified external entity name, return the associated filename. -This provides applications a way to convert various configuration file -references into filename form. - </para><para> -A null or empty <parameter>name</parameter> indicates that the default configuration file should -be used; which file this references can be overridden with the -FC_CONFIG_FILE environment variable. Next, if the name starts with <parameter>~</parameter>, it -refers to a file in the current users home directory. Otherwise if the name -doesn't start with '/', it refers to a file in the default configuration -directory; the built-in default directory can be overridden with the -FC_CONFIG_DIR environment variable. -@@ - -@RET@ FcBool -@FUNC@ FcConfigParseAndLoad -@TYPE1@ FcConfig * @ARG1@ config -@TYPE2@ const FcChar8 * @ARG2@ file -@TYPE3@ FcBool% @ARG3@ complain -@PURPOSE@ load a configuration file -@DESC@ -Walks the configuration in 'file' and constructs the internal representation -in 'config'. Any include files referenced from within 'file' will be loaded -and parsed. If 'complain' is FcFalse, no warning will be displayed if -'file' does not exist. Error and warning messages will be output to stderr. -Returns FcFalse if some error occurred while loading the file, either a -parse error, semantic error or allocation failure. Otherwise returns FcTrue. -@@ +/*
+ * fontconfig/doc/fcconfig.fncs
+ *
+ * Copyright © 2003 Keith Packard
+ *
+ * Permission to use, copy, modify, distribute, and sell this software and its
+ * documentation for any purpose is hereby granted without fee, provided that
+ * the above copyright notice appear in all copies and that both that
+ * copyright notice and this permission notice appear in supporting
+ * documentation, and that the name of the author(s) not be used in
+ * advertising or publicity pertaining to distribution of the software without
+ * specific, written prior permission. The authors make no
+ * representations about the suitability of this software for any purpose. It
+ * is provided "as is" without express or implied warranty.
+ *
+ * THE AUTHOR(S) DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE,
+ * INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO
+ * EVENT SHALL THE AUTHOR(S) BE LIABLE FOR ANY SPECIAL, INDIRECT OR
+ * CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE,
+ * DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER
+ * TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
+ * PERFORMANCE OF THIS SOFTWARE.
+ */
+@RET@ FcConfig *
+@FUNC@ FcConfigCreate
+@TYPE1@ void
+@PURPOSE@ Create a configuration
+@DESC@
+Creates an empty configuration.
+@@
+
+@RET@ FcConfig *
+@FUNC@ FcConfigReference
+@TYPE1@ FcConfig * @ARG1@ config
+@PURPOSE@ Increment config reference count
+@DESC@
+Add another reference to <parameter>config</parameter>. Configs are freed only
+when the reference count reaches zero.
+If <parameter>config</parameter> is NULL, the current configuration is used.
+In that case this function will be similar to FcConfigGetCurrent() except that
+it increments the reference count before returning and the user is responsible
+for destroying the configuration when not needed anymore.
+@@
+
+@RET@ void
+@FUNC@ FcConfigDestroy
+@TYPE1@ FcConfig * @ARG1@ config
+@PURPOSE@ Destroy a configuration
+@DESC@
+Decrements the config reference count. If all references are gone, destroys
+the configuration and any data associated with it.
+Note that calling this function with the return from FcConfigGetCurrent will
+cause a new configuration to be created for use as current configuration.
+@@
+
+@RET@ FcBool
+@FUNC@ FcConfigSetCurrent
+@TYPE1@ FcConfig * @ARG1@ config
+@PURPOSE@ Set configuration as default
+@DESC@
+Sets the current default configuration to <parameter>config</parameter>. Implicitly calls
+FcConfigBuildFonts if necessary, returning FcFalse if that call fails.
+@@
+
+@RET@ FcConfig *
+@FUNC@ FcConfigGetCurrent
+@TYPE1@ void
+@PURPOSE@ Return current configuration
+@DESC@
+Returns the current default configuration.
+@@
+
+@RET@ FcBool
+@FUNC@ FcConfigUptoDate
+@TYPE1@ FcConfig * @ARG1@ config
+@PURPOSE@ Check timestamps on config files
+@DESC@
+Checks all of the files related to <parameter>config</parameter> and returns
+whether any of them has been modified since the configuration was created.
+If <parameter>config</parameter> is NULL, the current configuration is used.
+@@
+
+@RET@ FcChar8 *
+@FUNC@ FcConfigHome
+@TYPE1@ void
+@PURPOSE@ return the current home directory.
+@DESC@
+Return the current user's home directory, if it is available, and if using it
+is enabled, and NULL otherwise.
+See also <function>FcConfigEnableHome</function>).
+@@
+
+@RET@ FcBool
+@FUNC@ FcConfigEnableHome
+@TYPE1@ FcBool% @ARG1@ enable
+@PURPOSE@ controls use of the home directory.
+@DESC@
+If <parameter>enable</parameter> is FcTrue, then Fontconfig will use various
+files which are specified relative to the user's home directory (using the ~
+notation in the configuration). When <parameter>enable</parameter> is
+FcFalse, then all use of the home directory in these contexts will be
+disabled. The previous setting of the value is returned.
+@@
+
+@RET@ FcBool
+@FUNC@ FcConfigBuildFonts
+@TYPE1@ FcConfig * @ARG1@ config
+@PURPOSE@ Build font database
+@DESC@
+Builds the set of available fonts for the given configuration. Note that
+any changes to the configuration after this call have indeterminate effects.
+Returns FcFalse if this operation runs out of memory.
+If <parameter>config</parameter> is NULL, the current configuration is used.
+@@
+
+@RET@ FcStrList *
+@FUNC@ FcConfigGetConfigDirs
+@TYPE1@ FcConfig * @ARG1@ config
+@PURPOSE@ Get config directories
+@DESC@
+Returns the list of font directories specified in the configuration files
+for <parameter>config</parameter>. Does not include any subdirectories.
+If <parameter>config</parameter> is NULL, the current configuration is used.
+@@
+
+@RET@ FcStrList *
+@FUNC@ FcConfigGetFontDirs
+@TYPE1@ FcConfig * @ARG1@ config
+@PURPOSE@ Get font directories
+@DESC@
+Returns the list of font directories in <parameter>config</parameter>. This includes the
+configured font directories along with any directories below those in the
+filesystem.
+If <parameter>config</parameter> is NULL, the current configuration is used.
+@@
+
+@RET@ FcStrList *
+@FUNC@ FcConfigGetConfigFiles
+@TYPE1@ FcConfig * @ARG1@ config
+@PURPOSE@ Get config files
+@DESC@
+Returns the list of known configuration files used to generate <parameter>config</parameter>.
+If <parameter>config</parameter> is NULL, the current configuration is used.
+@@
+
+@RET@ FcChar8 *
+@FUNC@ FcConfigGetCache
+@TYPE1@ FcConfig * @ARG1@ config
+@PURPOSE@ DEPRECATED used to return per-user cache filename
+@DESC@
+With fontconfig no longer using per-user cache files, this function now
+simply returns NULL to indicate that no per-user file exists.
+@@
+
+@RET@ FcStrList *
+@FUNC@ FcConfigGetCacheDirs
+@TYPE1@ FcConfig * @ARG1@ config
+@PURPOSE@ return the list of directories searched for cache files
+@DESC@
+<function>FcConfigGetCacheDirs</function> returns a string list containing
+all of the directories that fontconfig will search when attempting to load a
+cache file for a font directory.
+If <parameter>config</parameter> is NULL, the current configuration is used.
+@@
+
+@RET@ FcFontSet *
+@FUNC@ FcConfigGetFonts
+@TYPE1@ FcConfig * @ARG1@ config
+@TYPE2@ FcSetName% @ARG2@ set
+@PURPOSE@ Get config font set
+@DESC@
+Returns one of the two sets of fonts from the configuration as specified
+by <parameter>set</parameter>. This font set is owned by the library and must
+not be modified or freed.
+If <parameter>config</parameter> is NULL, the current configuration is used.
+@@
+
+@RET@ FcBlanks *
+@FUNC@ FcConfigGetBlanks
+@TYPE1@ FcConfig * @ARG1@ config
+@PURPOSE@ Get config blanks
+@DESC@
+Returns the FcBlanks object associated with the given configuration, if no
+blanks were present in the configuration, this function will return 0.
+The returned FcBlanks object if not NULL, is valid as long as the owning
+FcConfig is alive.
+If <parameter>config</parameter> is NULL, the current configuration is used.
+@@
+
+@RET@ int
+@FUNC@ FcConfigGetRescanInterval
+@TYPE1@ FcConfig * @ARG1@ config
+@PURPOSE@ Get config rescan interval
+@DESC@
+Returns the interval between automatic checks of the configuration (in
+seconds) specified in <parameter>config</parameter>. The configuration is checked during
+a call to FcFontList when this interval has passed since the last check.
+An interval setting of zero disables automatic checks.
+If <parameter>config</parameter> is NULL, the current configuration is used.
+@@
+
+@RET@ FcBool
+@FUNC@ FcConfigSetRescanInterval
+@TYPE1@ FcConfig * @ARG1@ config
+@TYPE2@ int% @ARG2@ rescanInterval
+@PURPOSE@ Set config rescan interval
+@DESC@
+Sets the rescan interval. Returns FcFalse if the interval cannot be set (due
+to allocation failure). Otherwise returns FcTrue.
+An interval setting of zero disables automatic checks.
+If <parameter>config</parameter> is NULL, the current configuration is used.
+@@
+
+@RET@ FcBool
+@FUNC@ FcConfigAppFontAddFile
+@TYPE1@ FcConfig * @ARG1@ config
+@TYPE2@ const FcChar8 * @ARG2@ file
+@PURPOSE@ Add font file to font database
+@DESC@
+Adds an application-specific font to the configuration. Returns FcFalse
+if the fonts cannot be added (due to allocation failure). Otherwise returns FcTrue.
+If <parameter>config</parameter> is NULL, the current configuration is used.
+@@
+
+@RET@ FcBool
+@FUNC@ FcConfigAppFontAddDir
+@TYPE1@ FcConfig * @ARG1@ config
+@TYPE2@ const FcChar8 * @ARG2@ dir
+@PURPOSE@ Add fonts from directory to font database
+@DESC@
+Scans the specified directory for fonts, adding each one found to the
+application-specific set of fonts. Returns FcFalse
+if the fonts cannot be added (due to allocation failure). Otherwise returns FcTrue.
+If <parameter>config</parameter> is NULL, the current configuration is used.
+@@
+
+@RET@ void
+@FUNC@ FcConfigAppFontClear
+@TYPE1@ FcConfig * @ARG1@ config
+@PURPOSE@ Remove all app fonts from font database
+@DESC@
+Clears the set of application-specific fonts.
+If <parameter>config</parameter> is NULL, the current configuration is used.
+@@
+
+@RET@ FcBool
+@FUNC@ FcConfigSubstituteWithPat
+@TYPE1@ FcConfig * @ARG1@ config
+@TYPE2@ FcPattern * @ARG2@ p
+@TYPE3@ FcPattern * @ARG3@ p_pat
+@TYPE4@ FcMatchKind% @ARG4@ kind
+@PURPOSE@ Execute substitutions
+@DESC@
+Performs the sequence of pattern modification operations, if <parameter>kind</parameter> is
+FcMatchPattern, then those tagged as pattern operations are applied, else
+if <parameter>kind</parameter> is FcMatchFont, those tagged as font operations are applied and
+p_pat is used for <test> elements with target=pattern. Returns FcFalse
+if the substitution cannot be performed (due to allocation failure). Otherwise returns FcTrue.
+If <parameter>config</parameter> is NULL, the current configuration is used.
+@@
+
+@RET@ FcBool
+@FUNC@ FcConfigSubstitute
+@TYPE1@ FcConfig * @ARG1@ config
+@TYPE2@ FcPattern * @ARG2@ p
+@TYPE3@ FcMatchKind% @ARG3@ kind
+@PURPOSE@ Execute substitutions
+@DESC@
+Calls FcConfigSubstituteWithPat setting p_pat to NULL. Returns FcFalse
+if the substitution cannot be performed (due to allocation failure). Otherwise returns FcTrue.
+If <parameter>config</parameter> is NULL, the current configuration is used.
+@@
+
+@RET@ FcPattern *
+@FUNC@ FcFontMatch
+@TYPE1@ FcConfig * @ARG1@ config
+@TYPE2@ FcPattern * @ARG2@ p
+@TYPE3@ FcResult * @ARG3@ result
+@PURPOSE@ Return best font
+@DESC@
+Finds the font in <parameter>sets</parameter> most closely matching
+<parameter>pattern</parameter> and returns the result of
+<function>FcFontRenderPrepare</function> for that font and the provided
+pattern. This function should be called only after
+<function>FcConfigSubstitute</function> and
+<function>FcDefaultSubstitute</function> have been called for
+<parameter>p</parameter>; otherwise the results will not be correct.
+If <parameter>config</parameter> is NULL, the current configuration is used.
+@@
+
+@RET@ FcFontSet *
+@FUNC@ FcFontSort
+@TYPE1@ FcConfig * @ARG1@ config
+@TYPE2@ FcPattern * @ARG2@ p
+@TYPE3@ FcBool% @ARG3@ trim
+@TYPE4@ FcCharSet ** @ARG4@ csp
+@TYPE5@ FcResult * @ARG5@ result
+@PURPOSE@ Return list of matching fonts
+@DESC@
+Returns the list of fonts sorted by closeness to <parameter>p</parameter>. If <parameter>trim</parameter> is FcTrue,
+elements in the list which don't include Unicode coverage not provided by
+earlier elements in the list are elided. The union of Unicode coverage of
+all of the fonts is returned in <parameter>csp</parameter>, if <parameter>csp</parameter> is not NULL. This function
+should be called only after FcConfigSubstitute and FcDefaultSubstitute have
+been called for <parameter>p</parameter>; otherwise the results will not be correct.
+ </para><para>
+The returned FcFontSet references FcPattern structures which may be shared
+by the return value from multiple FcFontSort calls, applications must not
+modify these patterns. Instead, they should be passed, along with <parameter>p</parameter> to
+<function>FcFontRenderPrepare</function> which combines them into a complete pattern.
+ </para><para>
+The FcFontSet returned by FcFontSort is destroyed by calling FcFontSetDestroy.
+If <parameter>config</parameter> is NULL, the current configuration is used.
+@@
+
+@RET@ FcPattern *
+@FUNC@ FcFontRenderPrepare
+@TYPE1@ FcConfig * @ARG1@ config
+@TYPE2@ FcPattern * @ARG2@ pat
+@TYPE3@ FcPattern * @ARG3@ font
+@PURPOSE@ Prepare pattern for loading font file
+@DESC@
+Creates a new pattern consisting of elements of <parameter>font</parameter> not appearing
+in <parameter>pat</parameter>, elements of <parameter>pat</parameter> not appearing in <parameter>font</parameter> and the best matching
+value from <parameter>pat</parameter> for elements appearing in both. The result is passed to
+FcConfigSubstituteWithPat with <parameter>kind</parameter> FcMatchFont and then returned.
+@@
+
+@RET@ FcFontSet *
+@FUNC@ FcFontList
+@TYPE1@ FcConfig * @ARG1@ config
+@TYPE2@ FcPattern * @ARG2@ p
+@TYPE3@ FcObjectSet * @ARG3@ os
+@PURPOSE@ List fonts
+@DESC@
+Selects fonts matching <parameter>p</parameter>, creates patterns from those fonts containing
+only the objects in <parameter>os</parameter> and returns the set of unique such patterns.
+If <parameter>config</parameter> is NULL, the default configuration is checked
+to be up to date, and used.
+@@
+
+@RET@ FcChar8 *
+@FUNC@ FcConfigFilename
+@TYPE1@ const FcChar8 * @ARG1@ name
+@PURPOSE@ Find a config file
+@DESC@
+Given the specified external entity name, return the associated filename.
+This provides applications a way to convert various configuration file
+references into filename form.
+ </para><para>
+A null or empty <parameter>name</parameter> indicates that the default configuration file should
+be used; which file this references can be overridden with the
+FC_CONFIG_FILE environment variable. Next, if the name starts with <parameter>~</parameter>, it
+refers to a file in the current users home directory. Otherwise if the name
+doesn't start with '/', it refers to a file in the default configuration
+directory; the built-in default directory can be overridden with the
+FC_CONFIG_DIR environment variable.
+@@
+
+@RET@ FcBool
+@FUNC@ FcConfigParseAndLoad
+@TYPE1@ FcConfig * @ARG1@ config
+@TYPE2@ const FcChar8 * @ARG2@ file
+@TYPE3@ FcBool% @ARG3@ complain
+@PURPOSE@ load a configuration file
+@DESC@
+Walks the configuration in 'file' and constructs the internal representation
+in 'config'. Any include files referenced from within 'file' will be loaded
+and parsed. If 'complain' is FcFalse, no warning will be displayed if
+'file' does not exist. Error and warning messages will be output to stderr.
+Returns FcFalse if some error occurred while loading the file, either a
+parse error, semantic error or allocation failure. Otherwise returns FcTrue.
+@@
|