aboutsummaryrefslogtreecommitdiff
path: root/freetype/include/config
diff options
context:
space:
mode:
Diffstat (limited to 'freetype/include/config')
-rw-r--r--freetype/include/config/ftconfig.h672
-rw-r--r--freetype/include/config/ftheader.h832
-rw-r--r--freetype/include/config/ftmodule.h32
-rw-r--r--freetype/include/config/ftoption.h846
-rw-r--r--freetype/include/config/ftstdlib.h174
5 files changed, 2556 insertions, 0 deletions
diff --git a/freetype/include/config/ftconfig.h b/freetype/include/config/ftconfig.h
new file mode 100644
index 000000000..48bd0b4bd
--- /dev/null
+++ b/freetype/include/config/ftconfig.h
@@ -0,0 +1,672 @@
+/***************************************************************************/
+/* */
+/* ftconfig.h */
+/* */
+/* ANSI-specific configuration file (specification only). */
+/* */
+/* Copyright 1996-2004, 2006-2008, 2010-2011, 2013, 2014 by */
+/* David Turner, Robert Wilhelm, and Werner Lemberg. */
+/* */
+/* This file is part of the FreeType project, and may only be used, */
+/* modified, and distributed under the terms of the FreeType project */
+/* license, LICENSE.TXT. By continuing to use, modify, or distribute */
+/* this file you indicate that you have read the license and */
+/* understand and accept it fully. */
+/* */
+/***************************************************************************/
+
+
+ /*************************************************************************/
+ /* */
+ /* This header file contains a number of macro definitions that are used */
+ /* by the rest of the engine. Most of the macros here are automatically */
+ /* determined at compile time, and you should not need to change it to */
+ /* port FreeType, except to compile the library with a non-ANSI */
+ /* compiler. */
+ /* */
+ /* Note however that if some specific modifications are needed, we */
+ /* advise you to place a modified copy in your build directory. */
+ /* */
+ /* The build directory is usually `builds/<system>', and contains */
+ /* system-specific files that are always included first when building */
+ /* the library. */
+ /* */
+ /* This ANSI version should stay in `include/config/'. */
+ /* */
+ /*************************************************************************/
+
+#ifndef __FTCONFIG_H__
+#define __FTCONFIG_H__
+
+#include <ft2build.h>
+#include <freetype/config/ftoption.h>
+#include <freetype/config/ftstdlib.h>
+
+
+FT_BEGIN_HEADER
+
+
+ /*************************************************************************/
+ /* */
+ /* PLATFORM-SPECIFIC CONFIGURATION MACROS */
+ /* */
+ /* These macros can be toggled to suit a specific system. The current */
+ /* ones are defaults used to compile FreeType in an ANSI C environment */
+ /* (16bit compilers are also supported). Copy this file to your own */
+ /* `builds/<system>' directory, and edit it to port the engine. */
+ /* */
+ /*************************************************************************/
+
+
+ /* There are systems (like the Texas Instruments 'C54x) where a `char' */
+ /* has 16 bits. ANSI C says that sizeof(char) is always 1. Since an */
+ /* `int' has 16 bits also for this system, sizeof(int) gives 1 which */
+ /* is probably unexpected. */
+ /* */
+ /* `CHAR_BIT' (defined in limits.h) gives the number of bits in a */
+ /* `char' type. */
+
+#ifndef FT_CHAR_BIT
+#define FT_CHAR_BIT CHAR_BIT
+#endif
+
+
+ /* The size of an `int' type. */
+#if FT_UINT_MAX == 0xFFFFUL
+#define FT_SIZEOF_INT (16 / FT_CHAR_BIT)
+#elif FT_UINT_MAX == 0xFFFFFFFFUL
+#define FT_SIZEOF_INT (32 / FT_CHAR_BIT)
+#elif FT_UINT_MAX > 0xFFFFFFFFUL && FT_UINT_MAX == 0xFFFFFFFFFFFFFFFFUL
+#define FT_SIZEOF_INT (64 / FT_CHAR_BIT)
+#else
+#error "Unsupported size of `int' type!"
+#endif
+
+ /* The size of a `long' type. A five-byte `long' (as used e.g. on the */
+ /* DM642) is recognized but avoided. */
+#if FT_ULONG_MAX == 0xFFFFFFFFUL
+#define FT_SIZEOF_LONG (32 / FT_CHAR_BIT)
+#elif FT_ULONG_MAX > 0xFFFFFFFFUL && FT_ULONG_MAX == 0xFFFFFFFFFFUL
+#define FT_SIZEOF_LONG (32 / FT_CHAR_BIT)
+#elif FT_ULONG_MAX > 0xFFFFFFFFUL && FT_ULONG_MAX == 0xFFFFFFFFFFFFFFFFUL
+#define FT_SIZEOF_LONG (64 / FT_CHAR_BIT)
+#else
+#error "Unsupported size of `long' type!"
+#endif
+
+
+ /* FT_UNUSED is a macro used to indicate that a given parameter is not */
+ /* used -- this is only used to get rid of unpleasant compiler warnings */
+#ifndef FT_UNUSED
+#define FT_UNUSED( arg ) ( (arg) = (arg) )
+#endif
+
+
+ /*************************************************************************/
+ /* */
+ /* AUTOMATIC CONFIGURATION MACROS */
+ /* */
+ /* These macros are computed from the ones defined above. Don't touch */
+ /* their definition, unless you know precisely what you are doing. No */
+ /* porter should need to mess with them. */
+ /* */
+ /*************************************************************************/
+
+
+ /*************************************************************************/
+ /* */
+ /* Mac support */
+ /* */
+ /* This is the only necessary change, so it is defined here instead */
+ /* providing a new configuration file. */
+ /* */
+#if defined( __APPLE__ ) || ( defined( __MWERKS__ ) && defined( macintosh ) )
+ /* no Carbon frameworks for 64bit 10.4.x */
+ /* AvailabilityMacros.h is available since Mac OS X 10.2, */
+ /* so guess the system version by maximum errno before inclusion */
+#include <errno.h>
+#ifdef ECANCELED /* defined since 10.2 */
+#include "AvailabilityMacros.h"
+#endif
+#if defined( __LP64__ ) && \
+ ( MAC_OS_X_VERSION_MIN_REQUIRED <= MAC_OS_X_VERSION_10_4 )
+#undef FT_MACINTOSH
+#endif
+
+#elif defined( __SC__ ) || defined( __MRC__ )
+ /* Classic MacOS compilers */
+#include "ConditionalMacros.h"
+#if TARGET_OS_MAC
+#define FT_MACINTOSH 1
+#endif
+
+#endif
+
+
+ /*************************************************************************/
+ /* */
+ /* <Section> */
+ /* basic_types */
+ /* */
+ /*************************************************************************/
+
+
+ /*************************************************************************/
+ /* */
+ /* <Type> */
+ /* FT_Int16 */
+ /* */
+ /* <Description> */
+ /* A typedef for a 16bit signed integer type. */
+ /* */
+ typedef signed short FT_Int16;
+
+
+ /*************************************************************************/
+ /* */
+ /* <Type> */
+ /* FT_UInt16 */
+ /* */
+ /* <Description> */
+ /* A typedef for a 16bit unsigned integer type. */
+ /* */
+ typedef unsigned short FT_UInt16;
+
+ /* */
+
+
+ /* this #if 0 ... #endif clause is for documentation purposes */
+#if 0
+
+ /*************************************************************************/
+ /* */
+ /* <Type> */
+ /* FT_Int32 */
+ /* */
+ /* <Description> */
+ /* A typedef for a 32bit signed integer type. The size depends on */
+ /* the configuration. */
+ /* */
+ typedef signed XXX FT_Int32;
+
+
+ /*************************************************************************/
+ /* */
+ /* <Type> */
+ /* FT_UInt32 */
+ /* */
+ /* A typedef for a 32bit unsigned integer type. The size depends on */
+ /* the configuration. */
+ /* */
+ typedef unsigned XXX FT_UInt32;
+
+
+ /*************************************************************************/
+ /* */
+ /* <Type> */
+ /* FT_Int64 */
+ /* */
+ /* A typedef for a 64bit signed integer type. The size depends on */
+ /* the configuration. Only defined if there is real 64bit support; */
+ /* otherwise, it gets emulated with a structure (if necessary). */
+ /* */
+ typedef signed XXX FT_Int64;
+
+
+ /*************************************************************************/
+ /* */
+ /* <Type> */
+ /* FT_UInt64 */
+ /* */
+ /* A typedef for a 64bit unsigned integer type. The size depends on */
+ /* the configuration. Only defined if there is real 64bit support; */
+ /* otherwise, it gets emulated with a structure (if necessary). */
+ /* */
+ typedef unsigned XXX FT_UInt64;
+
+ /* */
+
+#endif
+
+#if FT_SIZEOF_INT == (32 / FT_CHAR_BIT)
+
+ typedef signed int FT_Int32;
+ typedef unsigned int FT_UInt32;
+
+#elif FT_SIZEOF_LONG == (32 / FT_CHAR_BIT)
+
+ typedef signed long FT_Int32;
+ typedef unsigned long FT_UInt32;
+
+#else
+#error "no 32bit type found -- please check your configuration files"
+#endif
+
+
+ /* look up an integer type that is at least 32 bits */
+#if FT_SIZEOF_INT >= (32 / FT_CHAR_BIT)
+
+ typedef int FT_Fast;
+ typedef unsigned int FT_UFast;
+
+#elif FT_SIZEOF_LONG >= (32 / FT_CHAR_BIT)
+
+ typedef long FT_Fast;
+ typedef unsigned long FT_UFast;
+
+#endif
+
+
+ /* determine whether we have a 64-bit int type for platforms without */
+ /* Autoconf */
+#if FT_SIZEOF_LONG == (64 / FT_CHAR_BIT)
+
+ /* FT_LONG64 must be defined if a 64-bit type is available */
+#define FT_LONG64
+#define FT_INT64 long
+#define FT_UINT64 unsigned long
+
+#elif defined( _MSC_VER ) && _MSC_VER >= 900 /* Visual C++ (and Intel C++) */
+
+ /* this compiler provides the __int64 type */
+#define FT_LONG64
+#define FT_INT64 __int64
+#define FT_UINT64 unsigned __int64
+
+#elif defined( __BORLANDC__ ) /* Borland C++ */
+
+ /* XXXX: We should probably check the value of __BORLANDC__ in order */
+ /* to test the compiler version. */
+
+ /* this compiler provides the __int64 type */
+#define FT_LONG64
+#define FT_INT64 __int64
+#define FT_UINT64 unsigned __int64
+
+#elif defined( __WATCOMC__ ) /* Watcom C++ */
+
+ /* Watcom doesn't provide 64-bit data types */
+
+#elif defined( __MWERKS__ ) /* Metrowerks CodeWarrior */
+
+#define FT_LONG64
+#define FT_INT64 long long int
+#define FT_UINT64 unsigned long long int
+
+#elif defined( __GNUC__ )
+
+ /* GCC provides the `long long' type */
+#define FT_LONG64
+#define FT_INT64 long long int
+#define FT_UINT64 unsigned long long int
+
+#endif /* FT_SIZEOF_LONG == (64 / FT_CHAR_BIT) */
+
+
+ /*************************************************************************/
+ /* */
+ /* A 64-bit data type will create compilation problems if you compile */
+ /* in strict ANSI mode. To avoid them, we disable its use if __STDC__ */
+ /* is defined. You can however ignore this rule by defining the */
+ /* FT_CONFIG_OPTION_FORCE_INT64 configuration macro. */
+ /* */
+#if defined( FT_LONG64 ) && !defined( FT_CONFIG_OPTION_FORCE_INT64 )
+
+#ifdef __STDC__
+
+ /* undefine the 64-bit macros in strict ANSI compilation mode */
+#undef FT_LONG64
+#undef FT_INT64
+
+#endif /* __STDC__ */
+
+#endif /* FT_LONG64 && !FT_CONFIG_OPTION_FORCE_INT64 */
+
+#ifdef FT_LONG64
+ typedef FT_INT64 FT_Int64;
+ typedef FT_UINT64 FT_UInt64;
+#endif
+
+
+#define FT_BEGIN_STMNT do {
+#define FT_END_STMNT } while ( 0 )
+#define FT_DUMMY_STMNT FT_BEGIN_STMNT FT_END_STMNT
+
+
+#ifndef FT_CONFIG_OPTION_NO_ASSEMBLER
+ /* Provide assembler fragments for performance-critical functions. */
+ /* These must be defined `static __inline__' with GCC. */
+
+#if defined( __CC_ARM ) || defined( __ARMCC__ ) /* RVCT */
+
+#define FT_MULFIX_ASSEMBLER FT_MulFix_arm
+
+ /* documentation is in freetype.h */
+
+ static __inline FT_Int32
+ FT_MulFix_arm( FT_Int32 a,
+ FT_Int32 b )
+ {
+ register FT_Int32 t, t2;
+
+
+ __asm
+ {
+ smull t2, t, b, a /* (lo=t2,hi=t) = a*b */
+ mov a, t, asr #31 /* a = (hi >> 31) */
+ add a, a, #0x8000 /* a += 0x8000 */
+ adds t2, t2, a /* t2 += a */
+ adc t, t, #0 /* t += carry */
+ mov a, t2, lsr #16 /* a = t2 >> 16 */
+ orr a, a, t, lsl #16 /* a |= t << 16 */
+ }
+ return a;
+ }
+
+#endif /* __CC_ARM || __ARMCC__ */
+
+
+#ifdef __GNUC__
+
+#if defined( __arm__ ) && \
+ ( !defined( __thumb__ ) || defined( __thumb2__ ) ) && \
+ !( defined( __CC_ARM ) || defined( __ARMCC__ ) )
+
+#define FT_MULFIX_ASSEMBLER FT_MulFix_arm
+
+ /* documentation is in freetype.h */
+
+ static __inline__ FT_Int32
+ FT_MulFix_arm( FT_Int32 a,
+ FT_Int32 b )
+ {
+ register FT_Int32 t, t2;
+
+
+ __asm__ __volatile__ (
+ "smull %1, %2, %4, %3\n\t" /* (lo=%1,hi=%2) = a*b */
+ "mov %0, %2, asr #31\n\t" /* %0 = (hi >> 31) */
+#if defined( __clang__ ) && defined( __thumb2__ )
+ "add.w %0, %0, #0x8000\n\t" /* %0 += 0x8000 */
+#else
+ "add %0, %0, #0x8000\n\t" /* %0 += 0x8000 */
+#endif
+ "adds %1, %1, %0\n\t" /* %1 += %0 */
+ "adc %2, %2, #0\n\t" /* %2 += carry */
+ "mov %0, %1, lsr #16\n\t" /* %0 = %1 >> 16 */
+ "orr %0, %0, %2, lsl #16\n\t" /* %0 |= %2 << 16 */
+ : "=r"(a), "=&r"(t2), "=&r"(t)
+ : "r"(a), "r"(b)
+ : "cc" );
+ return a;
+ }
+
+#endif /* __arm__ && */
+ /* ( __thumb2__ || !__thumb__ ) && */
+ /* !( __CC_ARM || __ARMCC__ ) */
+
+
+#if defined( __i386__ )
+
+#define FT_MULFIX_ASSEMBLER FT_MulFix_i386
+
+ /* documentation is in freetype.h */
+
+ static __inline__ FT_Int32
+ FT_MulFix_i386( FT_Int32 a,
+ FT_Int32 b )
+ {
+ register FT_Int32 result;
+
+
+ __asm__ __volatile__ (
+ "imul %%edx\n"
+ "movl %%edx, %%ecx\n"
+ "sarl $31, %%ecx\n"
+ "addl $0x8000, %%ecx\n"
+ "addl %%ecx, %%eax\n"
+ "adcl $0, %%edx\n"
+ "shrl $16, %%eax\n"
+ "shll $16, %%edx\n"
+ "addl %%edx, %%eax\n"
+ : "=a"(result), "=d"(b)
+ : "a"(a), "d"(b)
+ : "%ecx", "cc" );
+ return result;
+ }
+
+#endif /* i386 */
+
+#endif /* __GNUC__ */
+
+
+#ifdef _MSC_VER /* Visual C++ */
+
+#ifdef _M_IX86
+
+#define FT_MULFIX_ASSEMBLER FT_MulFix_i386
+
+ /* documentation is in freetype.h */
+
+ static __inline FT_Int32
+ FT_MulFix_i386( FT_Int32 a,
+ FT_Int32 b )
+ {
+ register FT_Int32 result;
+
+ __asm
+ {
+ mov eax, a
+ mov edx, b
+ imul edx
+ mov ecx, edx
+ sar ecx, 31
+ add ecx, 8000h
+ add eax, ecx
+ adc edx, 0
+ shr eax, 16
+ shl edx, 16
+ add eax, edx
+ mov result, eax
+ }
+ return result;
+ }
+
+#endif /* _M_IX86 */
+
+#endif /* _MSC_VER */
+
+
+#if defined( __GNUC__ ) && defined( __x86_64__ )
+
+#define FT_MULFIX_ASSEMBLER FT_MulFix_x86_64
+
+ static __inline__ FT_Int32
+ FT_MulFix_x86_64( FT_Int32 a,
+ FT_Int32 b )
+ {
+ /* Temporarily disable the warning that C90 doesn't support */
+ /* `long long'. */
+#if ( __GNUC__ > 4 ) || ( ( __GNUC__ == 4 ) && ( __GNUC_MINOR__ >= 6 ) )
+#pragma GCC diagnostic push
+#pragma GCC diagnostic ignored "-Wlong-long"
+#endif
+
+#if 1
+ /* Technically not an assembly fragment, but GCC does a really good */
+ /* job at inlining it and generating good machine code for it. */
+ long long ret, tmp;
+
+
+ ret = (long long)a * b;
+ tmp = ret >> 63;
+ ret += 0x8000 + tmp;
+
+ return (FT_Int32)( ret >> 16 );
+#else
+
+ /* For some reason, GCC 4.6 on Ubuntu 12.04 generates invalid machine */
+ /* code from the lines below. The main issue is that `wide_a' is not */
+ /* properly initialized by sign-extending `a'. Instead, the generated */
+ /* machine code assumes that the register that contains `a' on input */
+ /* can be used directly as a 64-bit value, which is wrong most of the */
+ /* time. */
+ long long wide_a = (long long)a;
+ long long wide_b = (long long)b;
+ long long result;
+
+
+ __asm__ __volatile__ (
+ "imul %2, %1\n"
+ "mov %1, %0\n"
+ "sar $63, %0\n"
+ "lea 0x8000(%1, %0), %0\n"
+ "sar $16, %0\n"
+ : "=&r"(result), "=&r"(wide_a)
+ : "r"(wide_b)
+ : "cc" );
+
+ return (FT_Int32)result;
+#endif
+
+#if ( __GNUC__ > 4 ) || ( ( __GNUC__ == 4 ) && ( __GNUC_MINOR__ >= 6 ) )
+#pragma GCC diagnostic pop
+#endif
+ }
+
+#endif /* __GNUC__ && __x86_64__ */
+
+#endif /* !FT_CONFIG_OPTION_NO_ASSEMBLER */
+
+
+#ifdef FT_CONFIG_OPTION_INLINE_MULFIX
+#ifdef FT_MULFIX_ASSEMBLER
+#define FT_MULFIX_INLINED FT_MULFIX_ASSEMBLER
+#endif
+#endif
+
+
+#ifdef FT_MAKE_OPTION_SINGLE_OBJECT
+
+#define FT_LOCAL( x ) static x
+#define FT_LOCAL_DEF( x ) static x
+
+#else
+
+#ifdef __cplusplus
+#define FT_LOCAL( x ) extern "C" x
+#define FT_LOCAL_DEF( x ) extern "C" x
+#else
+#define FT_LOCAL( x ) extern x
+#define FT_LOCAL_DEF( x ) x
+#endif
+
+#endif /* FT_MAKE_OPTION_SINGLE_OBJECT */
+
+#define FT_LOCAL_ARRAY( x ) extern const x
+#define FT_LOCAL_ARRAY_DEF( x ) const x
+
+
+#ifndef FT_BASE
+
+#ifdef __cplusplus
+#define FT_BASE( x ) extern "C" x
+#else
+#define FT_BASE( x ) extern x
+#endif
+
+#endif /* !FT_BASE */
+
+
+#ifndef FT_BASE_DEF
+
+#ifdef __cplusplus
+#define FT_BASE_DEF( x ) x
+#else
+#define FT_BASE_DEF( x ) x
+#endif
+
+#endif /* !FT_BASE_DEF */
+
+
+#ifndef FT_EXPORT
+
+#ifdef __cplusplus
+#define FT_EXPORT( x ) extern "C" x
+#else
+#define FT_EXPORT( x ) extern x
+#endif
+
+#endif /* !FT_EXPORT */
+
+
+#ifndef FT_EXPORT_DEF
+
+#ifdef __cplusplus
+#define FT_EXPORT_DEF( x ) extern "C" x
+#else
+#define FT_EXPORT_DEF( x ) extern x
+#endif
+
+#endif /* !FT_EXPORT_DEF */
+
+
+#ifndef FT_EXPORT_VAR
+
+#ifdef __cplusplus
+#define FT_EXPORT_VAR( x ) extern "C" x
+#else
+#define FT_EXPORT_VAR( x ) extern x
+#endif
+
+#endif /* !FT_EXPORT_VAR */
+
+ /* The following macros are needed to compile the library with a */
+ /* C++ compiler and with 16bit compilers. */
+ /* */
+
+ /* This is special. Within C++, you must specify `extern "C"' for */
+ /* functions which are used via function pointers, and you also */
+ /* must do that for structures which contain function pointers to */
+ /* assure C linkage -- it's not possible to have (local) anonymous */
+ /* functions which are accessed by (global) function pointers. */
+ /* */
+ /* */
+ /* FT_CALLBACK_DEF is used to _define_ a callback function. */
+ /* */
+ /* FT_CALLBACK_TABLE is used to _declare_ a constant variable that */
+ /* contains pointers to callback functions. */
+ /* */
+ /* FT_CALLBACK_TABLE_DEF is used to _define_ a constant variable */
+ /* that contains pointers to callback functions. */
+ /* */
+ /* */
+ /* Some 16bit compilers have to redefine these macros to insert */
+ /* the infamous `_cdecl' or `__fastcall' declarations. */
+ /* */
+#ifndef FT_CALLBACK_DEF
+#ifdef __cplusplus
+#define FT_CALLBACK_DEF( x ) extern "C" x
+#else
+#define FT_CALLBACK_DEF( x ) static x
+#endif
+#endif /* FT_CALLBACK_DEF */
+
+#ifndef FT_CALLBACK_TABLE
+#ifdef __cplusplus
+#define FT_CALLBACK_TABLE extern "C"
+#define FT_CALLBACK_TABLE_DEF extern "C"
+#else
+#define FT_CALLBACK_TABLE extern
+#define FT_CALLBACK_TABLE_DEF /* nothing */
+#endif
+#endif /* FT_CALLBACK_TABLE */
+
+
+FT_END_HEADER
+
+
+#endif /* __FTCONFIG_H__ */
+
+
+/* END */
diff --git a/freetype/include/config/ftheader.h b/freetype/include/config/ftheader.h
new file mode 100644
index 000000000..b62362992
--- /dev/null
+++ b/freetype/include/config/ftheader.h
@@ -0,0 +1,832 @@
+/***************************************************************************/
+/* */
+/* ftheader.h */
+/* */
+/* Build macros of the FreeType 2 library. */
+/* */
+/* Copyright 1996-2008, 2010, 2012, 2013 by */
+/* David Turner, Robert Wilhelm, and Werner Lemberg. */
+/* */
+/* This file is part of the FreeType project, and may only be used, */
+/* modified, and distributed under the terms of the FreeType project */
+/* license, LICENSE.TXT. By continuing to use, modify, or distribute */
+/* this file you indicate that you have read the license and */
+/* understand and accept it fully. */
+/* */
+/***************************************************************************/
+
+#ifndef __FT_HEADER_H__
+#define __FT_HEADER_H__
+
+
+ /*@***********************************************************************/
+ /* */
+ /* <Macro> */
+ /* FT_BEGIN_HEADER */
+ /* */
+ /* <Description> */
+ /* This macro is used in association with @FT_END_HEADER in header */
+ /* files to ensure that the declarations within are properly */
+ /* encapsulated in an `extern "C" { .. }' block when included from a */
+ /* C++ compiler. */
+ /* */
+#ifdef __cplusplus
+#define FT_BEGIN_HEADER extern "C" {
+#else
+#define FT_BEGIN_HEADER /* nothing */
+#endif
+
+
+ /*@***********************************************************************/
+ /* */
+ /* <Macro> */
+ /* FT_END_HEADER */
+ /* */
+ /* <Description> */
+ /* This macro is used in association with @FT_BEGIN_HEADER in header */
+ /* files to ensure that the declarations within are properly */
+ /* encapsulated in an `extern "C" { .. }' block when included from a */
+ /* C++ compiler. */
+ /* */
+#ifdef __cplusplus
+#define FT_END_HEADER }
+#else
+#define FT_END_HEADER /* nothing */
+#endif
+
+
+ /*************************************************************************/
+ /* */
+ /* Aliases for the FreeType 2 public and configuration files. */
+ /* */
+ /*************************************************************************/
+
+ /*************************************************************************/
+ /* */
+ /* <Section> */
+ /* header_file_macros */
+ /* */
+ /* <Title> */
+ /* Header File Macros */
+ /* */
+ /* <Abstract> */
+ /* Macro definitions used to #include specific header files. */
+ /* */
+ /* <Description> */
+ /* The following macros are defined to the name of specific */
+ /* FreeType~2 header files. They can be used directly in #include */
+ /* statements as in: */
+ /* */
+ /* { */
+ /* #include FT_FREETYPE_H */
+ /* #include FT_MULTIPLE_MASTERS_H */
+ /* #include FT_GLYPH_H */
+ /* } */
+ /* */
+ /* There are several reasons why we are now using macros to name */
+ /* public header files. The first one is that such macros are not */
+ /* limited to the infamous 8.3~naming rule required by DOS (and */
+ /* `FT_MULTIPLE_MASTERS_H' is a lot more meaningful than `ftmm.h'). */
+ /* */
+ /* The second reason is that it allows for more flexibility in the */
+ /* way FreeType~2 is installed on a given system. */
+ /* */
+ /*************************************************************************/
+
+
+ /* configuration files */
+
+ /*************************************************************************
+ *
+ * @macro:
+ * FT_CONFIG_CONFIG_H
+ *
+ * @description:
+ * A macro used in #include statements to name the file containing
+ * FreeType~2 configuration data.
+ *
+ */
+#ifndef FT_CONFIG_CONFIG_H
+#define FT_CONFIG_CONFIG_H <config/ftconfig.h>
+#endif
+
+
+ /*************************************************************************
+ *
+ * @macro:
+ * FT_CONFIG_STANDARD_LIBRARY_H
+ *
+ * @description:
+ * A macro used in #include statements to name the file containing
+ * FreeType~2 interface to the standard C library functions.
+ *
+ */
+#ifndef FT_CONFIG_STANDARD_LIBRARY_H
+#define FT_CONFIG_STANDARD_LIBRARY_H <config/ftstdlib.h>
+#endif
+
+
+ /*************************************************************************
+ *
+ * @macro:
+ * FT_CONFIG_OPTIONS_H
+ *
+ * @description:
+ * A macro used in #include statements to name the file containing
+ * FreeType~2 project-specific configuration options.
+ *
+ */
+#ifndef FT_CONFIG_OPTIONS_H
+#define FT_CONFIG_OPTIONS_H <config/ftoption.h>
+#endif
+
+
+ /*************************************************************************
+ *
+ * @macro:
+ * FT_CONFIG_MODULES_H
+ *
+ * @description:
+ * A macro used in #include statements to name the file containing the
+ * list of FreeType~2 modules that are statically linked to new library
+ * instances in @FT_Init_FreeType.
+ *
+ */
+#ifndef FT_CONFIG_MODULES_H
+#define FT_CONFIG_MODULES_H <config/ftmodule.h>
+#endif
+
+ /* */
+
+ /* public headers */
+
+ /*************************************************************************
+ *
+ * @macro:
+ * FT_FREETYPE_H
+ *
+ * @description:
+ * A macro used in #include statements to name the file containing the
+ * base FreeType~2 API.
+ *
+ */
+#define FT_FREETYPE_H <freetype.h>
+
+
+ /*************************************************************************
+ *
+ * @macro:
+ * FT_ERRORS_H
+ *
+ * @description:
+ * A macro used in #include statements to name the file containing the
+ * list of FreeType~2 error codes (and messages).
+ *
+ * It is included by @FT_FREETYPE_H.
+ *
+ */
+#define FT_ERRORS_H <fterrors.h>
+
+
+ /*************************************************************************
+ *
+ * @macro:
+ * FT_MODULE_ERRORS_H
+ *
+ * @description:
+ * A macro used in #include statements to name the file containing the
+ * list of FreeType~2 module error offsets (and messages).
+ *
+ */
+#define FT_MODULE_ERRORS_H <ftmoderr.h>
+
+
+ /*************************************************************************
+ *
+ * @macro:
+ * FT_SYSTEM_H
+ *
+ * @description:
+ * A macro used in #include statements to name the file containing the
+ * FreeType~2 interface to low-level operations (i.e., memory management
+ * and stream i/o).
+ *
+ * It is included by @FT_FREETYPE_H.
+ *
+ */
+#define FT_SYSTEM_H <ftsystem.h>
+
+
+ /*************************************************************************
+ *
+ * @macro:
+ * FT_IMAGE_H
+ *
+ * @description:
+ * A macro used in #include statements to name the file containing type
+ * definitions related to glyph images (i.e., bitmaps, outlines,
+ * scan-converter parameters).
+ *
+ * It is included by @FT_FREETYPE_H.
+ *
+ */
+#define FT_IMAGE_H <ftimage.h>
+
+
+ /*************************************************************************
+ *
+ * @macro:
+ * FT_TYPES_H
+ *
+ * @description:
+ * A macro used in #include statements to name the file containing the
+ * basic data types defined by FreeType~2.
+ *
+ * It is included by @FT_FREETYPE_H.
+ *
+ */
+#define FT_TYPES_H <fttypes.h>
+
+
+ /*************************************************************************
+ *
+ * @macro:
+ * FT_LIST_H
+ *
+ * @description:
+ * A macro used in #include statements to name the file containing the
+ * list management API of FreeType~2.
+ *
+ * (Most applications will never need to include this file.)
+ *
+ */
+#define FT_LIST_H <ftlist.h>
+
+
+ /*************************************************************************
+ *
+ * @macro:
+ * FT_OUTLINE_H
+ *
+ * @description:
+ * A macro used in #include statements to name the file containing the
+ * scalable outline management API of FreeType~2.
+ *
+ */
+#define FT_OUTLINE_H <ftoutln.h>
+
+
+ /*************************************************************************
+ *
+ * @macro:
+ * FT_SIZES_H
+ *
+ * @description:
+ * A macro used in #include statements to name the file containing the
+ * API which manages multiple @FT_Size objects per face.
+ *
+ */
+#define FT_SIZES_H <ftsizes.h>
+
+
+ /*************************************************************************
+ *
+ * @macro:
+ * FT_MODULE_H
+ *
+ * @description:
+ * A macro used in #include statements to name the file containing the
+ * module management API of FreeType~2.
+ *
+ */
+#define FT_MODULE_H <ftmodapi.h>
+
+
+ /*************************************************************************
+ *
+ * @macro:
+ * FT_RENDER_H
+ *
+ * @description:
+ * A macro used in #include statements to name the file containing the
+ * renderer module management API of FreeType~2.
+ *
+ */
+#define FT_RENDER_H <ftrender.h>
+
+
+ /*************************************************************************
+ *
+ * @macro:
+ * FT_AUTOHINTER_H
+ *
+ * @description:
+ * A macro used in #include statements to name the file containing
+ * structures and macros related to the auto-hinting module.
+ *
+ */
+#define FT_AUTOHINTER_H <ftautoh.h>
+
+
+ /*************************************************************************
+ *
+ * @macro:
+ * FT_CFF_DRIVER_H
+ *
+ * @description:
+ * A macro used in #include statements to name the file containing
+ * structures and macros related to the CFF driver module.
+ *
+ */
+#define FT_CFF_DRIVER_H <ftcffdrv.h>
+
+
+ /*************************************************************************
+ *
+ * @macro:
+ * FT_TRUETYPE_DRIVER_H
+ *
+ * @description:
+ * A macro used in #include statements to name the file containing
+ * structures and macros related to the TrueType driver module.
+ *
+ */
+#define FT_TRUETYPE_DRIVER_H <ftttdrv.h>
+
+
+ /*************************************************************************
+ *
+ * @macro:
+ * FT_TYPE1_TABLES_H
+ *
+ * @description:
+ * A macro used in #include statements to name the file containing the
+ * types and API specific to the Type~1 format.
+ *
+ */
+#define FT_TYPE1_TABLES_H <t1tables.h>
+
+
+ /*************************************************************************
+ *
+ * @macro:
+ * FT_TRUETYPE_IDS_H
+ *
+ * @description:
+ * A macro used in #include statements to name the file containing the
+ * enumeration values which identify name strings, languages, encodings,
+ * etc. This file really contains a _large_ set of constant macro
+ * definitions, taken from the TrueType and OpenType specifications.
+ *
+ */
+#define FT_TRUETYPE_IDS_H <ttnameid.h>
+
+
+ /*************************************************************************
+ *
+ * @macro:
+ * FT_TRUETYPE_TABLES_H
+ *
+ * @description:
+ * A macro used in #include statements to name the file containing the
+ * types and API specific to the TrueType (as well as OpenType) format.
+ *
+ */
+#define FT_TRUETYPE_TABLES_H <tttables.h>
+
+
+ /*************************************************************************
+ *
+ * @macro:
+ * FT_TRUETYPE_TAGS_H
+ *
+ * @description:
+ * A macro used in #include statements to name the file containing the
+ * definitions of TrueType four-byte `tags' which identify blocks in
+ * SFNT-based font formats (i.e., TrueType and OpenType).
+ *
+ */
+#define FT_TRUETYPE_TAGS_H <tttags.h>
+
+
+ /*************************************************************************
+ *
+ * @macro:
+ * FT_BDF_H
+ *
+ * @description:
+ * A macro used in #include statements to name the file containing the
+ * definitions of an API which accesses BDF-specific strings from a
+ * face.
+ *
+ */
+#define FT_BDF_H <ftbdf.h>
+
+
+ /*************************************************************************
+ *
+ * @macro:
+ * FT_CID_H
+ *
+ * @description:
+ * A macro used in #include statements to name the file containing the
+ * definitions of an API which access CID font information from a
+ * face.
+ *
+ */
+#define FT_CID_H <ftcid.h>
+
+
+ /*************************************************************************
+ *
+ * @macro:
+ * FT_GZIP_H
+ *
+ * @description:
+ * A macro used in #include statements to name the file containing the
+ * definitions of an API which supports gzip-compressed files.
+ *
+ */
+#define FT_GZIP_H <ftgzip.h>
+
+
+ /*************************************************************************
+ *
+ * @macro:
+ * FT_LZW_H
+ *
+ * @description:
+ * A macro used in #include statements to name the file containing the
+ * definitions of an API which supports LZW-compressed files.
+ *
+ */
+#define FT_LZW_H <ftlzw.h>
+
+
+ /*************************************************************************
+ *
+ * @macro:
+ * FT_BZIP2_H
+ *
+ * @description:
+ * A macro used in #include statements to name the file containing the
+ * definitions of an API which supports bzip2-compressed files.
+ *
+ */
+#define FT_BZIP2_H <ftbzip2.h>
+
+
+ /*************************************************************************
+ *
+ * @macro:
+ * FT_WINFONTS_H
+ *
+ * @description:
+ * A macro used in #include statements to name the file containing the
+ * definitions of an API which supports Windows FNT files.
+ *
+ */
+#define FT_WINFONTS_H <ftwinfnt.h>
+
+
+ /*************************************************************************
+ *
+ * @macro:
+ * FT_GLYPH_H
+ *
+ * @description:
+ * A macro used in #include statements to name the file containing the
+ * API of the optional glyph management component.
+ *
+ */
+#define FT_GLYPH_H <ftglyph.h>
+
+
+ /*************************************************************************
+ *
+ * @macro:
+ * FT_BITMAP_H
+ *
+ * @description:
+ * A macro used in #include statements to name the file containing the
+ * API of the optional bitmap conversion component.
+ *
+ */
+#define FT_BITMAP_H <ftbitmap.h>
+
+
+ /*************************************************************************
+ *
+ * @macro:
+ * FT_BBOX_H
+ *
+ * @description:
+ * A macro used in #include statements to name the file containing the
+ * API of the optional exact bounding box computation routines.
+ *
+ */
+#define FT_BBOX_H <ftbbox.h>
+
+
+ /*************************************************************************
+ *
+ * @macro:
+ * FT_CACHE_H
+ *
+ * @description:
+ * A macro used in #include statements to name the file containing the
+ * API of the optional FreeType~2 cache sub-system.
+ *
+ */
+#define FT_CACHE_H <ftcache.h>
+
+
+ /*************************************************************************
+ *
+ * @macro:
+ * FT_CACHE_IMAGE_H
+ *
+ * @description:
+ * A macro used in #include statements to name the file containing the
+ * `glyph image' API of the FreeType~2 cache sub-system.
+ *
+ * It is used to define a cache for @FT_Glyph elements. You can also
+ * use the API defined in @FT_CACHE_SMALL_BITMAPS_H if you only need to
+ * store small glyph bitmaps, as it will use less memory.
+ *
+ * This macro is deprecated. Simply include @FT_CACHE_H to have all
+ * glyph image-related cache declarations.
+ *
+ */
+#define FT_CACHE_IMAGE_H FT_CACHE_H
+
+
+ /*************************************************************************
+ *
+ * @macro:
+ * FT_CACHE_SMALL_BITMAPS_H
+ *
+ * @description:
+ * A macro used in #include statements to name the file containing the
+ * `small bitmaps' API of the FreeType~2 cache sub-system.
+ *
+ * It is used to define a cache for small glyph bitmaps in a relatively
+ * memory-efficient way. You can also use the API defined in
+ * @FT_CACHE_IMAGE_H if you want to cache arbitrary glyph images,
+ * including scalable outlines.
+ *
+ * This macro is deprecated. Simply include @FT_CACHE_H to have all
+ * small bitmaps-related cache declarations.
+ *
+ */
+#define FT_CACHE_SMALL_BITMAPS_H FT_CACHE_H
+
+
+ /*************************************************************************
+ *
+ * @macro:
+ * FT_CACHE_CHARMAP_H
+ *
+ * @description:
+ * A macro used in #include statements to name the file containing the
+ * `charmap' API of the FreeType~2 cache sub-system.
+ *
+ * This macro is deprecated. Simply include @FT_CACHE_H to have all
+ * charmap-based cache declarations.
+ *
+ */
+#define FT_CACHE_CHARMAP_H FT_CACHE_H
+
+
+ /*************************************************************************
+ *
+ * @macro:
+ * FT_MAC_H
+ *
+ * @description:
+ * A macro used in #include statements to name the file containing the
+ * Macintosh-specific FreeType~2 API. The latter is used to access
+ * fonts embedded in resource forks.
+ *
+ * This header file must be explicitly included by client applications
+ * compiled on the Mac (note that the base API still works though).
+ *
+ */
+#define FT_MAC_H <ftmac.h>
+
+
+ /*************************************************************************
+ *
+ * @macro:
+ * FT_MULTIPLE_MASTERS_H
+ *
+ * @description:
+ * A macro used in #include statements to name the file containing the
+ * optional multiple-masters management API of FreeType~2.
+ *
+ */
+#define FT_MULTIPLE_MASTERS_H <ftmm.h>
+
+
+ /*************************************************************************
+ *
+ * @macro:
+ * FT_SFNT_NAMES_H
+ *
+ * @description:
+ * A macro used in #include statements to name the file containing the
+ * optional FreeType~2 API which accesses embedded `name' strings in
+ * SFNT-based font formats (i.e., TrueType and OpenType).
+ *
+ */
+#define FT_SFNT_NAMES_H <ftsnames.h>
+
+
+ /*************************************************************************
+ *
+ * @macro:
+ * FT_OPENTYPE_VALIDATE_H
+ *
+ * @description:
+ * A macro used in #include statements to name the file containing the
+ * optional FreeType~2 API which validates OpenType tables (BASE, GDEF,
+ * GPOS, GSUB, JSTF).
+ *
+ */
+#define FT_OPENTYPE_VALIDATE_H <ftotval.h>
+
+
+ /*************************************************************************
+ *
+ * @macro:
+ * FT_GX_VALIDATE_H
+ *
+ * @description:
+ * A macro used in #include statements to name the file containing the
+ * optional FreeType~2 API which validates TrueTypeGX/AAT tables (feat,
+ * mort, morx, bsln, just, kern, opbd, trak, prop).
+ *
+ */
+#define FT_GX_VALIDATE_H <ftgxval.h>
+
+
+ /*************************************************************************
+ *
+ * @macro:
+ * FT_PFR_H
+ *
+ * @description:
+ * A macro used in #include statements to name the file containing the
+ * FreeType~2 API which accesses PFR-specific data.
+ *
+ */
+#define FT_PFR_H <ftpfr.h>
+
+
+ /*************************************************************************
+ *
+ * @macro:
+ * FT_STROKER_H
+ *
+ * @description:
+ * A macro used in #include statements to name the file containing the
+ * FreeType~2 API which provides functions to stroke outline paths.
+ */
+#define FT_STROKER_H <ftstroke.h>
+
+
+ /*************************************************************************
+ *
+ * @macro:
+ * FT_SYNTHESIS_H
+ *
+ * @description:
+ * A macro used in #include statements to name the file containing the
+ * FreeType~2 API which performs artificial obliquing and emboldening.
+ */
+#define FT_SYNTHESIS_H <ftsynth.h>
+
+
+ /*************************************************************************
+ *
+ * @macro:
+ * FT_XFREE86_H
+ *
+ * @description:
+ * A macro used in #include statements to name the file containing the
+ * FreeType~2 API which provides functions specific to the XFree86 and
+ * X.Org X11 servers.
+ */
+#define FT_XFREE86_H <ftxf86.h>
+
+
+ /*************************************************************************
+ *
+ * @macro:
+ * FT_TRIGONOMETRY_H
+ *
+ * @description:
+ * A macro used in #include statements to name the file containing the
+ * FreeType~2 API which performs trigonometric computations (e.g.,
+ * cosines and arc tangents).
+ */
+#define FT_TRIGONOMETRY_H <fttrigon.h>
+
+
+ /*************************************************************************
+ *
+ * @macro:
+ * FT_LCD_FILTER_H
+ *
+ * @description:
+ * A macro used in #include statements to name the file containing the
+ * FreeType~2 API which performs color filtering for subpixel rendering.
+ */
+#define FT_LCD_FILTER_H <ftlcdfil.h>
+
+
+ /*************************************************************************
+ *
+ * @macro:
+ * FT_UNPATENTED_HINTING_H
+ *
+ * @description:
+ * A macro used in #include statements to name the file containing the
+ * FreeType~2 API which performs color filtering for subpixel rendering.
+ */
+#define FT_UNPATENTED_HINTING_H <ttunpat.h>
+
+
+ /*************************************************************************
+ *
+ * @macro:
+ * FT_INCREMENTAL_H
+ *
+ * @description:
+ * A macro used in #include statements to name the file containing the
+ * FreeType~2 API which performs color filtering for subpixel rendering.
+ */
+#define FT_INCREMENTAL_H <ftincrem.h>
+
+
+ /*************************************************************************
+ *
+ * @macro:
+ * FT_GASP_H
+ *
+ * @description:
+ * A macro used in #include statements to name the file containing the
+ * FreeType~2 API which returns entries from the TrueType GASP table.
+ */
+#define FT_GASP_H <ftgasp.h>
+
+
+ /*************************************************************************
+ *
+ * @macro:
+ * FT_ADVANCES_H
+ *
+ * @description:
+ * A macro used in #include statements to name the file containing the
+ * FreeType~2 API which returns individual and ranged glyph advances.
+ */
+#define FT_ADVANCES_H <ftadvanc.h>
+
+
+ /* */
+
+#define FT_ERROR_DEFINITIONS_H <fterrdef.h>
+
+
+ /* The internals of the cache sub-system are no longer exposed. We */
+ /* default to FT_CACHE_H at the moment just in case, but we know of */
+ /* no rogue client that uses them. */
+ /* */
+#define FT_CACHE_MANAGER_H <ftcache.h>
+#define FT_CACHE_INTERNAL_MRU_H <ftcache.h>
+#define FT_CACHE_INTERNAL_MANAGER_H <ftcache.h>
+#define FT_CACHE_INTERNAL_CACHE_H <ftcache.h>
+#define FT_CACHE_INTERNAL_GLYPH_H <ftcache.h>
+#define FT_CACHE_INTERNAL_IMAGE_H <ftcache.h>
+#define FT_CACHE_INTERNAL_SBITS_H <ftcache.h>
+
+
+#define FT_INCREMENTAL_H <ftincrem.h>
+
+#define FT_TRUETYPE_UNPATENTED_H <ttunpat.h>
+
+
+ /*
+ * Include internal headers definitions from <internal/...>
+ * only when building the library.
+ */
+#ifdef FT2_BUILD_LIBRARY
+#define FT_INTERNAL_INTERNAL_H <internal/internal.h>
+#include FT_INTERNAL_INTERNAL_H
+#endif /* FT2_BUILD_LIBRARY */
+
+
+#endif /* __FT2_BUILD_H__ */
+
+
+/* END */
diff --git a/freetype/include/config/ftmodule.h b/freetype/include/config/ftmodule.h
new file mode 100644
index 000000000..76d271a74
--- /dev/null
+++ b/freetype/include/config/ftmodule.h
@@ -0,0 +1,32 @@
+/*
+ * This file registers the FreeType modules compiled into the library.
+ *
+ * If you use GNU make, this file IS NOT USED! Instead, it is created in
+ * the objects directory (normally `<topdir>/objs/') based on information
+ * from `<topdir>/modules.cfg'.
+ *
+ * Please read `docs/INSTALL.ANY' and `docs/CUSTOMIZE' how to compile
+ * FreeType without GNU make.
+ *
+ */
+
+FT_USE_MODULE( FT_Module_Class, autofit_module_class )
+FT_USE_MODULE( FT_Driver_ClassRec, tt_driver_class )
+FT_USE_MODULE( FT_Driver_ClassRec, t1_driver_class )
+FT_USE_MODULE( FT_Driver_ClassRec, cff_driver_class )
+FT_USE_MODULE( FT_Driver_ClassRec, t1cid_driver_class )
+FT_USE_MODULE( FT_Driver_ClassRec, pfr_driver_class )
+FT_USE_MODULE( FT_Driver_ClassRec, t42_driver_class )
+FT_USE_MODULE( FT_Driver_ClassRec, winfnt_driver_class )
+FT_USE_MODULE( FT_Driver_ClassRec, pcf_driver_class )
+FT_USE_MODULE( FT_Module_Class, psaux_module_class )
+FT_USE_MODULE( FT_Module_Class, psnames_module_class )
+FT_USE_MODULE( FT_Module_Class, pshinter_module_class )
+FT_USE_MODULE( FT_Renderer_Class, ft_raster1_renderer_class )
+FT_USE_MODULE( FT_Module_Class, sfnt_module_class )
+FT_USE_MODULE( FT_Renderer_Class, ft_smooth_renderer_class )
+FT_USE_MODULE( FT_Renderer_Class, ft_smooth_lcd_renderer_class )
+FT_USE_MODULE( FT_Renderer_Class, ft_smooth_lcdv_renderer_class )
+FT_USE_MODULE( FT_Driver_ClassRec, bdf_driver_class )
+
+/* EOF */
diff --git a/freetype/include/config/ftoption.h b/freetype/include/config/ftoption.h
new file mode 100644
index 000000000..5b11f0e03
--- /dev/null
+++ b/freetype/include/config/ftoption.h
@@ -0,0 +1,846 @@
+/***************************************************************************/
+/* */
+/* ftoption.h */
+/* */
+/* User-selectable configuration macros (specification only). */
+/* */
+/* Copyright 1996-2013 by */
+/* David Turner, Robert Wilhelm, and Werner Lemberg. */
+/* */
+/* This file is part of the FreeType project, and may only be used, */
+/* modified, and distributed under the terms of the FreeType project */
+/* license, LICENSE.TXT. By continuing to use, modify, or distribute */
+/* this file you indicate that you have read the license and */
+/* understand and accept it fully. */
+/* */
+/***************************************************************************/
+
+
+#ifndef __FTOPTION_H__
+#define __FTOPTION_H__
+
+
+#include <ft2build.h>
+
+
+FT_BEGIN_HEADER
+
+ /*************************************************************************/
+ /* */
+ /* USER-SELECTABLE CONFIGURATION MACROS */
+ /* */
+ /* This file contains the default configuration macro definitions for */
+ /* a standard build of the FreeType library. There are three ways to */
+ /* use this file to build project-specific versions of the library: */
+ /* */
+ /* - You can modify this file by hand, but this is not recommended in */
+ /* cases where you would like to build several versions of the */
+ /* library from a single source directory. */
+ /* */
+ /* - You can put a copy of this file in your build directory, more */
+ /* precisely in `$BUILD/config/ftoption.h', where `$BUILD' is the */
+ /* name of a directory that is included _before_ the FreeType include */
+ /* path during compilation. */
+ /* */
+ /* The default FreeType Makefiles and Jamfiles use the build */
+ /* directory `builds/<system>' by default, but you can easily change */
+ /* that for your own projects. */
+ /* */
+ /* - Copy the file <ft2build.h> to `$BUILD/ft2build.h' and modify it */
+ /* slightly to pre-define the macro FT_CONFIG_OPTIONS_H used to */
+ /* locate this file during the build. For example, */
+ /* */
+ /* #define FT_CONFIG_OPTIONS_H <myftoptions.h> */
+ /* #include <config/ftheader.h> */
+ /* */
+ /* will use `$BUILD/myftoptions.h' instead of this file for macro */
+ /* definitions. */
+ /* */
+ /* Note also that you can similarly pre-define the macro */
+ /* FT_CONFIG_MODULES_H used to locate the file listing of the modules */
+ /* that are statically linked to the library at compile time. By */
+ /* default, this file is <config/ftmodule.h>. */
+ /* */
+ /* We highly recommend using the third method whenever possible. */
+ /* */
+ /*************************************************************************/
+
+
+ /*************************************************************************/
+ /*************************************************************************/
+ /**** ****/
+ /**** G E N E R A L F R E E T Y P E 2 C O N F I G U R A T I O N ****/
+ /**** ****/
+ /*************************************************************************/
+ /*************************************************************************/
+
+
+ /*************************************************************************/
+ /* */
+ /* Uncomment the line below if you want to activate sub-pixel rendering */
+ /* (a.k.a. LCD rendering, or ClearType) in this build of the library. */
+ /* */
+ /* Note that this feature is covered by several Microsoft patents */
+ /* and should not be activated in any default build of the library. */
+ /* */
+ /* This macro has no impact on the FreeType API, only on its */
+ /* _implementation_. For example, using FT_RENDER_MODE_LCD when calling */
+ /* FT_Render_Glyph still generates a bitmap that is 3 times wider than */
+ /* the original size in case this macro isn't defined; however, each */
+ /* triplet of subpixels has R=G=B. */
+ /* */
+ /* This is done to allow FreeType clients to run unmodified, forcing */
+ /* them to display normal gray-level anti-aliased glyphs. */
+ /* */
+/* #define FT_CONFIG_OPTION_SUBPIXEL_RENDERING */
+
+
+ /*************************************************************************/
+ /* */
+ /* Many compilers provide a non-ANSI 64-bit data type that can be used */
+ /* by FreeType to speed up some computations. However, this will create */
+ /* some problems when compiling the library in strict ANSI mode. */
+ /* */
+ /* For this reason, the use of 64-bit integers is normally disabled when */
+ /* the __STDC__ macro is defined. You can however disable this by */
+ /* defining the macro FT_CONFIG_OPTION_FORCE_INT64 here. */
+ /* */
+ /* For most compilers, this will only create compilation warnings when */
+ /* building the library. */
+ /* */
+ /* ObNote: The compiler-specific 64-bit integers are detected in the */
+ /* file `ftconfig.h' either statically or through the */
+ /* `configure' script on supported platforms. */
+ /* */
+#undef FT_CONFIG_OPTION_FORCE_INT64
+
+
+ /*************************************************************************/
+ /* */
+ /* If this macro is defined, do not try to use an assembler version of */
+ /* performance-critical functions (e.g. FT_MulFix). You should only do */
+ /* that to verify that the assembler function works properly, or to */
+ /* execute benchmark tests of the various implementations. */
+/* #define FT_CONFIG_OPTION_NO_ASSEMBLER */
+
+
+ /*************************************************************************/
+ /* */
+ /* If this macro is defined, try to use an inlined assembler version of */
+ /* the `FT_MulFix' function, which is a `hotspot' when loading and */
+ /* hinting glyphs, and which should be executed as fast as possible. */
+ /* */
+ /* Note that if your compiler or CPU is not supported, this will default */
+ /* to the standard and portable implementation found in `ftcalc.c'. */
+ /* */
+#define FT_CONFIG_OPTION_INLINE_MULFIX
+
+
+ /*************************************************************************/
+ /* */
+ /* LZW-compressed file support. */
+ /* */
+ /* FreeType now handles font files that have been compressed with the */
+ /* `compress' program. This is mostly used to parse many of the PCF */
+ /* files that come with various X11 distributions. The implementation */
+ /* uses NetBSD's `zopen' to partially uncompress the file on the fly */
+ /* (see src/lzw/ftgzip.c). */
+ /* */
+ /* Define this macro if you want to enable this `feature'. */
+ /* */
+#define FT_CONFIG_OPTION_USE_LZW
+
+
+ /*************************************************************************/
+ /* */
+ /* Gzip-compressed file support. */
+ /* */
+ /* FreeType now handles font files that have been compressed with the */
+ /* `gzip' program. This is mostly used to parse many of the PCF files */
+ /* that come with XFree86. The implementation uses `zlib' to */
+ /* partially uncompress the file on the fly (see src/gzip/ftgzip.c). */
+ /* */
+ /* Define this macro if you want to enable this `feature'. See also */
+ /* the macro FT_CONFIG_OPTION_SYSTEM_ZLIB below. */
+ /* */
+#define FT_CONFIG_OPTION_USE_ZLIB
+
+
+ /*************************************************************************/
+ /* */
+ /* ZLib library selection */
+ /* */
+ /* This macro is only used when FT_CONFIG_OPTION_USE_ZLIB is defined. */
+ /* It allows FreeType's `ftgzip' component to link to the system's */
+ /* installation of the ZLib library. This is useful on systems like */
+ /* Unix or VMS where it generally is already available. */
+ /* */
+ /* If you let it undefined, the component will use its own copy */
+ /* of the zlib sources instead. These have been modified to be */
+ /* included directly within the component and *not* export external */
+ /* function names. This allows you to link any program with FreeType */
+ /* _and_ ZLib without linking conflicts. */
+ /* */
+ /* Do not #undef this macro here since the build system might define */
+ /* it for certain configurations only. */
+ /* */
+/* #define FT_CONFIG_OPTION_SYSTEM_ZLIB */
+
+
+ /*************************************************************************/
+ /* */
+ /* Bzip2-compressed file support. */
+ /* */
+ /* FreeType now handles font files that have been compressed with the */
+ /* `bzip2' program. This is mostly used to parse many of the PCF */
+ /* files that come with XFree86. The implementation uses `libbz2' to */
+ /* partially uncompress the file on the fly (see src/bzip2/ftbzip2.c). */
+ /* Contrary to gzip, bzip2 currently is not included and need to use */
+ /* the system available bzip2 implementation. */
+ /* */
+ /* Define this macro if you want to enable this `feature'. */
+ /* */
+/* #define FT_CONFIG_OPTION_USE_BZIP2 */
+
+
+ /*************************************************************************/
+ /* */
+ /* Define to disable the use of file stream functions and types, FILE, */
+ /* fopen() etc. Enables the use of smaller system libraries on embedded */
+ /* systems that have multiple system libraries, some with or without */
+ /* file stream support, in the cases where file stream support is not */
+ /* necessary such as memory loading of font files. */
+ /* */
+/* #define FT_CONFIG_OPTION_DISABLE_STREAM_SUPPORT */
+
+
+ /*************************************************************************/
+ /* */
+ /* PNG bitmap support. */
+ /* */
+ /* FreeType now handles loading color bitmap glyphs in the PNG format. */
+ /* This requires help from the external libpng library. Uncompressed */
+ /* color bitmaps do not need any external libraries and will be */
+ /* supported regardless of this configuration. */
+ /* */
+ /* Define this macro if you want to enable this `feature'. */
+ /* */
+/* #define FT_CONFIG_OPTION_USE_PNG */
+
+
+ /*************************************************************************/
+ /* */
+ /* HarfBuzz support. */
+ /* */
+ /* FreeType uses the HarfBuzz library to improve auto-hinting of */
+ /* OpenType fonts. If available, many glyphs not directly addressable */
+ /* by a font's character map will be hinted also. */
+ /* */
+ /* Define this macro if you want to enable this `feature'. */
+ /* */
+/* #define FT_CONFIG_OPTION_USE_HARFBUZZ */
+
+
+ /*************************************************************************/
+ /* */
+ /* DLL export compilation */
+ /* */
+ /* When compiling FreeType as a DLL, some systems/compilers need a */
+ /* special keyword in front OR after the return type of function */
+ /* declarations. */
+ /* */
+ /* Two macros are used within the FreeType source code to define */
+ /* exported library functions: FT_EXPORT and FT_EXPORT_DEF. */
+ /* */
+ /* FT_EXPORT( return_type ) */
+ /* */
+ /* is used in a function declaration, as in */
+ /* */
+ /* FT_EXPORT( FT_Error ) */
+ /* FT_Init_FreeType( FT_Library* alibrary ); */
+ /* */
+ /* */
+ /* FT_EXPORT_DEF( return_type ) */
+ /* */
+ /* is used in a function definition, as in */
+ /* */
+ /* FT_EXPORT_DEF( FT_Error ) */
+ /* FT_Init_FreeType( FT_Library* alibrary ) */
+ /* { */
+ /* ... some code ... */
+ /* return FT_Err_Ok; */
+ /* } */
+ /* */
+ /* You can provide your own implementation of FT_EXPORT and */
+ /* FT_EXPORT_DEF here if you want. If you leave them undefined, they */
+ /* will be later automatically defined as `extern return_type' to */
+ /* allow normal compilation. */
+ /* */
+ /* Do not #undef these macros here since the build system might define */
+ /* them for certain configurations only. */
+ /* */
+/* #define FT_EXPORT(x) extern x */
+/* #define FT_EXPORT_DEF(x) x */
+
+
+ /*************************************************************************/
+ /* */
+ /* Glyph Postscript Names handling */
+ /* */
+ /* By default, FreeType 2 is compiled with the `psnames' module. This */
+ /* module is in charge of converting a glyph name string into a */
+ /* Unicode value, or return a Macintosh standard glyph name for the */
+ /* use with the TrueType `post' table. */
+ /* */
+ /* Undefine this macro if you do not want `psnames' compiled in your */
+ /* build of FreeType. This has the following effects: */
+ /* */
+ /* - The TrueType driver will provide its own set of glyph names, */
+ /* if you build it to support postscript names in the TrueType */
+ /* `post' table. */
+ /* */
+ /* - The Type 1 driver will not be able to synthesize a Unicode */
+ /* charmap out of the glyphs found in the fonts. */
+ /* */
+ /* You would normally undefine this configuration macro when building */
+ /* a version of FreeType that doesn't contain a Type 1 or CFF driver. */
+ /* */
+#define FT_CONFIG_OPTION_POSTSCRIPT_NAMES
+
+
+ /*************************************************************************/
+ /* */
+ /* Postscript Names to Unicode Values support */
+ /* */
+ /* By default, FreeType 2 is built with the `PSNames' module compiled */
+ /* in. Among other things, the module is used to convert a glyph name */
+ /* into a Unicode value. This is especially useful in order to */
+ /* synthesize on the fly a Unicode charmap from the CFF/Type 1 driver */
+ /* through a big table named the `Adobe Glyph List' (AGL). */
+ /* */
+ /* Undefine this macro if you do not want the Adobe Glyph List */
+ /* compiled in your `PSNames' module. The Type 1 driver will not be */
+ /* able to synthesize a Unicode charmap out of the glyphs found in the */
+ /* fonts. */
+ /* */
+#define FT_CONFIG_OPTION_ADOBE_GLYPH_LIST
+
+
+ /*************************************************************************/
+ /* */
+ /* Support for Mac fonts */
+ /* */
+ /* Define this macro if you want support for outline fonts in Mac */
+ /* format (mac dfont, mac resource, macbinary containing a mac */
+ /* resource) on non-Mac platforms. */
+ /* */
+ /* Note that the `FOND' resource isn't checked. */
+ /* */
+#define FT_CONFIG_OPTION_MAC_FONTS
+
+
+ /*************************************************************************/
+ /* */
+ /* Guessing methods to access embedded resource forks */
+ /* */
+ /* Enable extra Mac fonts support on non-Mac platforms (e.g. */
+ /* GNU/Linux). */
+ /* */
+ /* Resource forks which include fonts data are stored sometimes in */
+ /* locations which users or developers don't expected. In some cases, */
+ /* resource forks start with some offset from the head of a file. In */
+ /* other cases, the actual resource fork is stored in file different */
+ /* from what the user specifies. If this option is activated, */
+ /* FreeType tries to guess whether such offsets or different file */
+ /* names must be used. */
+ /* */
+ /* Note that normal, direct access of resource forks is controlled via */
+ /* the FT_CONFIG_OPTION_MAC_FONTS option. */
+ /* */
+#ifdef FT_CONFIG_OPTION_MAC_FONTS
+#define FT_CONFIG_OPTION_GUESSING_EMBEDDED_RFORK
+#endif
+
+
+ /*************************************************************************/
+ /* */
+ /* Allow the use of FT_Incremental_Interface to load typefaces that */
+ /* contain no glyph data, but supply it via a callback function. */
+ /* This is required by clients supporting document formats which */
+ /* supply font data incrementally as the document is parsed, such */
+ /* as the Ghostscript interpreter for the PostScript language. */
+ /* */
+#define FT_CONFIG_OPTION_INCREMENTAL
+
+
+ /*************************************************************************/
+ /* */
+ /* The size in bytes of the render pool used by the scan-line converter */
+ /* to do all of its work. */
+ /* */
+ /* This must be greater than 4KByte if you use FreeType to rasterize */
+ /* glyphs; otherwise, you may set it to zero to avoid unnecessary */
+ /* allocation of the render pool. */
+ /* */
+#define FT_RENDER_POOL_SIZE 16384L
+
+
+ /*************************************************************************/
+ /* */
+ /* FT_MAX_MODULES */
+ /* */
+ /* The maximum number of modules that can be registered in a single */
+ /* FreeType library object. 32 is the default. */
+ /* */
+#define FT_MAX_MODULES 32
+
+
+ /*************************************************************************/
+ /* */
+ /* Debug level */
+ /* */
+ /* FreeType can be compiled in debug or trace mode. In debug mode, */
+ /* errors are reported through the `ftdebug' component. In trace */
+ /* mode, additional messages are sent to the standard output during */
+ /* execution. */
+ /* */
+ /* Define FT_DEBUG_LEVEL_ERROR to build the library in debug mode. */
+ /* Define FT_DEBUG_LEVEL_TRACE to build it in trace mode. */
+ /* */
+ /* Don't define any of these macros to compile in `release' mode! */
+ /* */
+ /* Do not #undef these macros here since the build system might define */
+ /* them for certain configurations only. */
+ /* */
+/* #define FT_DEBUG_LEVEL_ERROR */
+/* #define FT_DEBUG_LEVEL_TRACE */
+
+
+ /*************************************************************************/
+ /* */
+ /* Autofitter debugging */
+ /* */
+ /* If FT_DEBUG_AUTOFIT is defined, FreeType provides some means to */
+ /* control the autofitter behaviour for debugging purposes with global */
+ /* boolean variables (consequently, you should *never* enable this */
+ /* while compiling in `release' mode): */
+ /* */
+ /* _af_debug_disable_horz_hints */
+ /* _af_debug_disable_vert_hints */
+ /* _af_debug_disable_blue_hints */
+ /* */
+ /* Additionally, the following functions provide dumps of various */
+ /* internal autofit structures to stdout (using `printf'): */
+ /* */
+ /* af_glyph_hints_dump_points */
+ /* af_glyph_hints_dump_segments */
+ /* af_glyph_hints_dump_edges */
+ /* */
+ /* As an argument, they use another global variable: */
+ /* */
+ /* _af_debug_hints */
+ /* */
+ /* Please have a look at the `ftgrid' demo program to see how those */
+ /* variables and macros should be used. */
+ /* */
+ /* Do not #undef these macros here since the build system might define */
+ /* them for certain configurations only. */
+ /* */
+/* #define FT_DEBUG_AUTOFIT */
+
+
+ /*************************************************************************/
+ /* */
+ /* Memory Debugging */
+ /* */
+ /* FreeType now comes with an integrated memory debugger that is */
+ /* capable of detecting simple errors like memory leaks or double */
+ /* deletes. To compile it within your build of the library, you */
+ /* should define FT_DEBUG_MEMORY here. */
+ /* */
+ /* Note that the memory debugger is only activated at runtime when */
+ /* when the _environment_ variable `FT2_DEBUG_MEMORY' is defined also! */
+ /* */
+ /* Do not #undef this macro here since the build system might define */
+ /* it for certain configurations only. */
+ /* */
+/* #define FT_DEBUG_MEMORY */
+
+
+ /*************************************************************************/
+ /* */
+ /* Module errors */
+ /* */
+ /* If this macro is set (which is _not_ the default), the higher byte */
+ /* of an error code gives the module in which the error has occurred, */
+ /* while the lower byte is the real error code. */
+ /* */
+ /* Setting this macro makes sense for debugging purposes only, since */
+ /* it would break source compatibility of certain programs that use */
+ /* FreeType 2. */
+ /* */
+ /* More details can be found in the files ftmoderr.h and fterrors.h. */
+ /* */
+#undef FT_CONFIG_OPTION_USE_MODULE_ERRORS
+
+
+ /*************************************************************************/
+ /* */
+ /* Position Independent Code */
+ /* */
+ /* If this macro is set (which is _not_ the default), FreeType2 will */
+ /* avoid creating constants that require address fixups. Instead the */
+ /* constants will be moved into a struct and additional intialization */
+ /* code will be used. */
+ /* */
+ /* Setting this macro is needed for systems that prohibit address */
+ /* fixups, such as BREW. */
+ /* */
+/* #define FT_CONFIG_OPTION_PIC */
+
+
+ /*************************************************************************/
+ /*************************************************************************/
+ /**** ****/
+ /**** S F N T D R I V E R C O N F I G U R A T I O N ****/
+ /**** ****/
+ /*************************************************************************/
+ /*************************************************************************/
+
+
+ /*************************************************************************/
+ /* */
+ /* Define TT_CONFIG_OPTION_EMBEDDED_BITMAPS if you want to support */
+ /* embedded bitmaps in all formats using the SFNT module (namely */
+ /* TrueType & OpenType). */
+ /* */
+#define TT_CONFIG_OPTION_EMBEDDED_BITMAPS
+
+
+ /*************************************************************************/
+ /* */
+ /* Define TT_CONFIG_OPTION_POSTSCRIPT_NAMES if you want to be able to */
+ /* load and enumerate the glyph Postscript names in a TrueType or */
+ /* OpenType file. */
+ /* */
+ /* Note that when you do not compile the `PSNames' module by undefining */
+ /* the above FT_CONFIG_OPTION_POSTSCRIPT_NAMES, the `sfnt' module will */
+ /* contain additional code used to read the PS Names table from a font. */
+ /* */
+ /* (By default, the module uses `PSNames' to extract glyph names.) */
+ /* */
+#define TT_CONFIG_OPTION_POSTSCRIPT_NAMES
+
+
+ /*************************************************************************/
+ /* */
+ /* Define TT_CONFIG_OPTION_SFNT_NAMES if your applications need to */
+ /* access the internal name table in a SFNT-based format like TrueType */
+ /* or OpenType. The name table contains various strings used to */
+ /* describe the font, like family name, copyright, version, etc. It */
+ /* does not contain any glyph name though. */
+ /* */
+ /* Accessing SFNT names is done through the functions declared in */
+ /* `ftsnames.h'. */
+ /* */
+#define TT_CONFIG_OPTION_SFNT_NAMES
+
+
+ /*************************************************************************/
+ /* */
+ /* TrueType CMap support */
+ /* */
+ /* Here you can fine-tune which TrueType CMap table format shall be */
+ /* supported. */
+#define TT_CONFIG_CMAP_FORMAT_0
+#define TT_CONFIG_CMAP_FORMAT_2
+#define TT_CONFIG_CMAP_FORMAT_4
+#define TT_CONFIG_CMAP_FORMAT_6
+#define TT_CONFIG_CMAP_FORMAT_8
+#define TT_CONFIG_CMAP_FORMAT_10
+#define TT_CONFIG_CMAP_FORMAT_12
+#define TT_CONFIG_CMAP_FORMAT_13
+#define TT_CONFIG_CMAP_FORMAT_14
+
+
+ /*************************************************************************/
+ /*************************************************************************/
+ /**** ****/
+ /**** T R U E T Y P E D R I V E R C O N F I G U R A T I O N ****/
+ /**** ****/
+ /*************************************************************************/
+ /*************************************************************************/
+
+ /*************************************************************************/
+ /* */
+ /* Define TT_CONFIG_OPTION_BYTECODE_INTERPRETER if you want to compile */
+ /* a bytecode interpreter in the TrueType driver. */
+ /* */
+ /* By undefining this, you will only compile the code necessary to load */
+ /* TrueType glyphs without hinting. */
+ /* */
+ /* Do not #undef this macro here, since the build system might */
+ /* define it for certain configurations only. */
+ /* */
+#define TT_CONFIG_OPTION_BYTECODE_INTERPRETER
+
+
+ /*************************************************************************/
+ /* */
+ /* Define TT_CONFIG_OPTION_SUBPIXEL_HINTING if you want to compile */
+ /* EXPERIMENTAL subpixel hinting support into the TrueType driver. This */
+ /* replaces the native TrueType hinting mechanism when anything but */
+ /* FT_RENDER_MODE_MONO is requested. */
+ /* */
+ /* Enabling this causes the TrueType driver to ignore instructions under */
+ /* certain conditions. This is done in accordance with the guide here, */
+ /* with some minor differences: */
+ /* */
+ /* http://www.microsoft.com/typography/cleartype/truetypecleartype.aspx */
+ /* */
+ /* By undefining this, you only compile the code necessary to hint */
+ /* TrueType glyphs with native TT hinting. */
+ /* */
+ /* This option requires TT_CONFIG_OPTION_BYTECODE_INTERPRETER to be */
+ /* defined. */
+ /* */
+/* #define TT_CONFIG_OPTION_SUBPIXEL_HINTING */
+
+
+ /*************************************************************************/
+ /* */
+ /* If you define TT_CONFIG_OPTION_UNPATENTED_HINTING, a special version */
+ /* of the TrueType bytecode interpreter is used that doesn't implement */
+ /* any of the patented opcodes and algorithms. The patents related to */
+ /* TrueType hinting have expired worldwide since May 2010; this option */
+ /* is now deprecated. */
+ /* */
+ /* Note that the TT_CONFIG_OPTION_UNPATENTED_HINTING macro is *ignored* */
+ /* if you define TT_CONFIG_OPTION_BYTECODE_INTERPRETER; in other words, */
+ /* either define TT_CONFIG_OPTION_BYTECODE_INTERPRETER or */
+ /* TT_CONFIG_OPTION_UNPATENTED_HINTING but not both at the same time. */
+ /* */
+ /* This macro is only useful for a small number of font files (mostly */
+ /* for Asian scripts) that require bytecode interpretation to properly */
+ /* load glyphs. For all other fonts, this produces unpleasant results, */
+ /* thus the unpatented interpreter is never used to load glyphs from */
+ /* TrueType fonts unless one of the following two options is used. */
+ /* */
+ /* - The unpatented interpreter is explicitly activated by the user */
+ /* through the FT_PARAM_TAG_UNPATENTED_HINTING parameter tag */
+ /* when opening the FT_Face. */
+ /* */
+ /* - FreeType detects that the FT_Face corresponds to one of the */
+ /* `trick' fonts (e.g., `Mingliu') it knows about. The font engine */
+ /* contains a hard-coded list of font names and other matching */
+ /* parameters (see function `tt_face_init' in file */
+ /* `src/truetype/ttobjs.c'). */
+ /* */
+ /* Here a sample code snippet for using FT_PARAM_TAG_UNPATENTED_HINTING. */
+ /* */
+ /* { */
+ /* FT_Parameter parameter; */
+ /* FT_Open_Args open_args; */
+ /* */
+ /* */
+ /* parameter.tag = FT_PARAM_TAG_UNPATENTED_HINTING; */
+ /* */
+ /* open_args.flags = FT_OPEN_PATHNAME | FT_OPEN_PARAMS; */
+ /* open_args.pathname = my_font_pathname; */
+ /* open_args.num_params = 1; */
+ /* open_args.params = &parameter; */
+ /* */
+ /* error = FT_Open_Face( library, &open_args, index, &face ); */
+ /* ... */
+ /* } */
+ /* */
+/* #define TT_CONFIG_OPTION_UNPATENTED_HINTING */
+
+
+ /*************************************************************************/
+ /* */
+ /* Define TT_CONFIG_OPTION_INTERPRETER_SWITCH to compile the TrueType */
+ /* bytecode interpreter with a huge switch statement, rather than a call */
+ /* table. This results in smaller and faster code for a number of */
+ /* architectures. */
+ /* */
+ /* Note however that on some compiler/processor combinations, undefining */
+ /* this macro will generate faster, though larger, code. */
+ /* */
+#define TT_CONFIG_OPTION_INTERPRETER_SWITCH
+
+
+ /*************************************************************************/
+ /* */
+ /* Define TT_CONFIG_OPTION_COMPONENT_OFFSET_SCALED to compile the */
+ /* TrueType glyph loader to use Apple's definition of how to handle */
+ /* component offsets in composite glyphs. */
+ /* */
+ /* Apple and MS disagree on the default behavior of component offsets */
+ /* in composites. Apple says that they should be scaled by the scaling */
+ /* factors in the transformation matrix (roughly, it's more complex) */
+ /* while MS says they should not. OpenType defines two bits in the */
+ /* composite flags array which can be used to disambiguate, but old */
+ /* fonts will not have them. */
+ /* */
+ /* http://www.microsoft.com/typography/otspec/glyf.htm */
+ /* http://fonts.apple.com/TTRefMan/RM06/Chap6glyf.html */
+ /* */
+#undef TT_CONFIG_OPTION_COMPONENT_OFFSET_SCALED
+
+
+ /*************************************************************************/
+ /* */
+ /* Define TT_CONFIG_OPTION_GX_VAR_SUPPORT if you want to include */
+ /* support for Apple's distortable font technology (fvar, gvar, cvar, */
+ /* and avar tables). This has many similarities to Type 1 Multiple */
+ /* Masters support. */
+ /* */
+#define TT_CONFIG_OPTION_GX_VAR_SUPPORT
+
+
+ /*************************************************************************/
+ /* */
+ /* Define TT_CONFIG_OPTION_BDF if you want to include support for */
+ /* an embedded `BDF ' table within SFNT-based bitmap formats. */
+ /* */
+#define TT_CONFIG_OPTION_BDF
+
+
+ /*************************************************************************/
+ /*************************************************************************/
+ /**** ****/
+ /**** T Y P E 1 D R I V E R C O N F I G U R A T I O N ****/
+ /**** ****/
+ /*************************************************************************/
+ /*************************************************************************/
+
+
+ /*************************************************************************/
+ /* */
+ /* T1_MAX_DICT_DEPTH is the maximum depth of nest dictionaries and */
+ /* arrays in the Type 1 stream (see t1load.c). A minimum of 4 is */
+ /* required. */
+ /* */
+#define T1_MAX_DICT_DEPTH 5
+
+
+ /*************************************************************************/
+ /* */
+ /* T1_MAX_SUBRS_CALLS details the maximum number of nested sub-routine */
+ /* calls during glyph loading. */
+ /* */
+#define T1_MAX_SUBRS_CALLS 16
+
+
+ /*************************************************************************/
+ /* */
+ /* T1_MAX_CHARSTRING_OPERANDS is the charstring stack's capacity. A */
+ /* minimum of 16 is required. */
+ /* */
+ /* The Chinese font MingTiEG-Medium (CNS 11643 character set) needs 256. */
+ /* */
+#define T1_MAX_CHARSTRINGS_OPERANDS 256
+
+
+ /*************************************************************************/
+ /* */
+ /* Define this configuration macro if you want to prevent the */
+ /* compilation of `t1afm', which is in charge of reading Type 1 AFM */
+ /* files into an existing face. Note that if set, the T1 driver will be */
+ /* unable to produce kerning distances. */
+ /* */
+#undef T1_CONFIG_OPTION_NO_AFM
+
+
+ /*************************************************************************/
+ /* */
+ /* Define this configuration macro if you want to prevent the */
+ /* compilation of the Multiple Masters font support in the Type 1 */
+ /* driver. */
+ /* */
+#undef T1_CONFIG_OPTION_NO_MM_SUPPORT
+
+
+ /*************************************************************************/
+ /*************************************************************************/
+ /**** ****/
+ /**** C F F D R I V E R C O N F I G U R A T I O N ****/
+ /**** ****/
+ /*************************************************************************/
+ /*************************************************************************/
+
+
+ /*************************************************************************/
+ /* */
+ /* CFF_CONFIG_OPTION_OLD_ENGINE controls whether the pre-Adobe CFF */
+ /* engine gets compiled into FreeType. If defined, it is possible to */
+ /* switch between the two engines using the `hinting-engine' property of */
+ /* the cff driver module. */
+ /* */
+/* #define CFF_CONFIG_OPTION_OLD_ENGINE */
+
+
+ /*************************************************************************/
+ /*************************************************************************/
+ /**** ****/
+ /**** A U T O F I T M O D U L E C O N F I G U R A T I O N ****/
+ /**** ****/
+ /*************************************************************************/
+ /*************************************************************************/
+
+
+ /*************************************************************************/
+ /* */
+ /* Compile autofit module with CJK (Chinese, Japanese, Korean) script */
+ /* support. */
+ /* */
+#define AF_CONFIG_OPTION_CJK
+
+ /*************************************************************************/
+ /* */
+ /* Compile autofit module with Indic script support. */
+ /* */
+#define AF_CONFIG_OPTION_INDIC
+
+ /*************************************************************************/
+ /* */
+ /* Compile autofit module with warp hinting. The idea of the warping */
+ /* code is to slightly scale and shift a glyph within a single dimension */
+ /* so that as much of its segments are aligned (more or less) on the */
+ /* grid. To find out the optimal scaling and shifting value, various */
+ /* parameter combinations are tried and scored. */
+ /* */
+ /* This experimental option is only active if the render mode is */
+ /* FT_RENDER_MODE_LIGHT. */
+ /* */
+/* #define AF_CONFIG_OPTION_USE_WARPER */
+
+ /* */
+
+
+ /*
+ * This macro is obsolete. Support has been removed in FreeType
+ * version 2.5.
+ */
+/* #define FT_CONFIG_OPTION_OLD_INTERNALS */
+
+
+ /*
+ * This macro is defined if either unpatented or native TrueType
+ * hinting is requested by the definitions above.
+ */
+#ifdef TT_CONFIG_OPTION_BYTECODE_INTERPRETER
+#define TT_USE_BYTECODE_INTERPRETER
+#undef TT_CONFIG_OPTION_UNPATENTED_HINTING
+#elif defined TT_CONFIG_OPTION_UNPATENTED_HINTING
+#define TT_USE_BYTECODE_INTERPRETER
+#endif
+
+FT_END_HEADER
+
+
+#endif /* __FTOPTION_H__ */
+
+
+/* END */
diff --git a/freetype/include/config/ftstdlib.h b/freetype/include/config/ftstdlib.h
new file mode 100644
index 000000000..b940efc42
--- /dev/null
+++ b/freetype/include/config/ftstdlib.h
@@ -0,0 +1,174 @@
+/***************************************************************************/
+/* */
+/* ftstdlib.h */
+/* */
+/* ANSI-specific library and header configuration file (specification */
+/* only). */
+/* */
+/* Copyright 2002-2007, 2009, 2011-2012 by */
+/* David Turner, Robert Wilhelm, and Werner Lemberg. */
+/* */
+/* This file is part of the FreeType project, and may only be used, */
+/* modified, and distributed under the terms of the FreeType project */
+/* license, LICENSE.TXT. By continuing to use, modify, or distribute */
+/* this file you indicate that you have read the license and */
+/* understand and accept it fully. */
+/* */
+/***************************************************************************/
+
+
+ /*************************************************************************/
+ /* */
+ /* This file is used to group all #includes to the ANSI C library that */
+ /* FreeType normally requires. It also defines macros to rename the */
+ /* standard functions within the FreeType source code. */
+ /* */
+ /* Load a file which defines __FTSTDLIB_H__ before this one to override */
+ /* it. */
+ /* */
+ /*************************************************************************/
+
+
+#ifndef __FTSTDLIB_H__
+#define __FTSTDLIB_H__
+
+
+#include <stddef.h>
+
+#define ft_ptrdiff_t ptrdiff_t
+
+
+ /**********************************************************************/
+ /* */
+ /* integer limits */
+ /* */
+ /* UINT_MAX and ULONG_MAX are used to automatically compute the size */
+ /* of `int' and `long' in bytes at compile-time. So far, this works */
+ /* for all platforms the library has been tested on. */
+ /* */
+ /* Note that on the extremely rare platforms that do not provide */
+ /* integer types that are _exactly_ 16 and 32 bits wide (e.g. some */
+ /* old Crays where `int' is 36 bits), we do not make any guarantee */
+ /* about the correct behaviour of FT2 with all fonts. */
+ /* */
+ /* In these case, `ftconfig.h' will refuse to compile anyway with a */
+ /* message like `couldn't find 32-bit type' or something similar. */
+ /* */
+ /**********************************************************************/
+
+
+#include <limits.h>
+
+#define FT_CHAR_BIT CHAR_BIT
+#define FT_USHORT_MAX USHRT_MAX
+#define FT_INT_MAX INT_MAX
+#define FT_INT_MIN INT_MIN
+#define FT_UINT_MAX UINT_MAX
+#define FT_ULONG_MAX ULONG_MAX
+
+
+ /**********************************************************************/
+ /* */
+ /* character and string processing */
+ /* */
+ /**********************************************************************/
+
+
+#include <string.h>
+
+#define ft_memchr memchr
+#define ft_memcmp memcmp
+#define ft_memcpy memcpy
+#define ft_memmove memmove
+#define ft_memset memset
+#define ft_strcat strcat
+#define ft_strcmp strcmp
+#define ft_strcpy strcpy
+#define ft_strlen strlen
+#define ft_strncmp strncmp
+#define ft_strncpy strncpy
+#define ft_strrchr strrchr
+#define ft_strstr strstr
+
+
+ /**********************************************************************/
+ /* */
+ /* file handling */
+ /* */
+ /**********************************************************************/
+
+
+#include <stdio.h>
+
+#define FT_FILE FILE
+#define ft_fclose fclose
+#define ft_fopen fopen
+#define ft_fread fread
+#define ft_fseek fseek
+#define ft_ftell ftell
+#define ft_sprintf sprintf
+
+
+ /**********************************************************************/
+ /* */
+ /* sorting */
+ /* */
+ /**********************************************************************/
+
+
+#include <stdlib.h>
+
+#define ft_qsort qsort
+
+
+ /**********************************************************************/
+ /* */
+ /* memory allocation */
+ /* */
+ /**********************************************************************/
+
+
+#define ft_scalloc calloc
+#define ft_sfree free
+#define ft_smalloc malloc
+#define ft_srealloc realloc
+
+
+ /**********************************************************************/
+ /* */
+ /* miscellaneous */
+ /* */
+ /**********************************************************************/
+
+
+#define ft_atol atol
+#define ft_labs labs
+
+
+ /**********************************************************************/
+ /* */
+ /* execution control */
+ /* */
+ /**********************************************************************/
+
+
+#include <setjmp.h>
+
+#define ft_jmp_buf jmp_buf /* note: this cannot be a typedef since */
+ /* jmp_buf is defined as a macro */
+ /* on certain platforms */
+
+#define ft_longjmp longjmp
+#define ft_setjmp( b ) setjmp( *(ft_jmp_buf*) &(b) ) /* same thing here */
+
+
+ /* the following is only used for debugging purposes, i.e., if */
+ /* FT_DEBUG_LEVEL_ERROR or FT_DEBUG_LEVEL_TRACE are defined */
+
+#include <stdarg.h>
+
+
+#endif /* __FTSTDLIB_H__ */
+
+
+/* END */