diff options
Diffstat (limited to 'libXfont/Makefile.in')
| -rw-r--r-- | libXfont/Makefile.in | 840 |
1 files changed, 0 insertions, 840 deletions
diff --git a/libXfont/Makefile.in b/libXfont/Makefile.in deleted file mode 100644 index ff9b887b0..000000000 --- a/libXfont/Makefile.in +++ /dev/null @@ -1,840 +0,0 @@ -# Makefile.in generated by automake 1.10.2 from Makefile.am. -# @configure_input@ - -# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, -# 2003, 2004, 2005, 2006, 2007, 2008 Free Software Foundation, Inc. -# This Makefile.in is free software; the Free Software Foundation -# gives unlimited permission to copy and/or distribute it, -# with or without modifications, as long as this notice is preserved. - -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY, to the extent permitted by law; without -# even the implied warranty of MERCHANTABILITY or FITNESS FOR A -# PARTICULAR PURPOSE. - -@SET_MAKE@ - -# -# Copyright © 2003 Keith Packard, Noah Levitt -# -# Permission to use, copy, modify, distribute, and sell this software and its -# documentation for any purpose is hereby granted without fee, provided that -# the above copyright notice appear in all copies and that both that -# copyright notice and this permission notice appear in supporting -# documentation, and that the name of Keith Packard not be used in -# advertising or publicity pertaining to distribution of the software without -# specific, written prior permission. Keith Packard makes no -# representations about the suitability of this software for any purpose. It -# is provided "as is" without express or implied warranty. -# -# KEITH PACKARD DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE, -# INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO -# EVENT SHALL KEITH PACKARD BE LIABLE FOR ANY SPECIAL, INDIRECT OR -# CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, -# DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER -# TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR -# PERFORMANCE OF THIS SOFTWARE. - - -VPATH = @srcdir@ -pkgdatadir = $(datadir)/@PACKAGE@ -pkglibdir = $(libdir)/@PACKAGE@ -pkgincludedir = $(includedir)/@PACKAGE@ -am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd -install_sh_DATA = $(install_sh) -c -m 644 -install_sh_PROGRAM = $(install_sh) -c -install_sh_SCRIPT = $(install_sh) -c -INSTALL_HEADER = $(INSTALL_DATA) -transform = $(program_transform_name) -NORMAL_INSTALL = : -PRE_INSTALL = : -POST_INSTALL = : -NORMAL_UNINSTALL = : -PRE_UNINSTALL = : -POST_UNINSTALL = : -build_triplet = @build@ -host_triplet = @host@ -@ENABLE_DEVEL_DOCS_TRUE@@HAVE_FOP_TRUE@@HAVE_XMLTO_TRUE@am__append_1 = doc/fontlib.pdf doc/fontlib.ps -subdir = . -DIST_COMMON = README $(am__configure_deps) $(libXfontinclude_HEADERS) \ - $(srcdir)/Makefile.am $(srcdir)/Makefile.in \ - $(srcdir)/config.h.in $(srcdir)/xfont.pc.in \ - $(top_srcdir)/configure \ - $(top_srcdir)/include/X11/fonts/fontconf.h.in AUTHORS COPYING \ - ChangeLog INSTALL config.guess config.sub depcomp install-sh \ - ltmain.sh missing -ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 -am__aclocal_m4_deps = $(top_srcdir)/configure.ac -am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ - $(ACLOCAL_M4) -am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \ - configure.lineno config.status.lineno -mkinstalldirs = $(install_sh) -d -CONFIG_HEADER = config.h $(top_builddir)/include/X11/fonts/fontconf.h -CONFIG_CLEAN_FILES = xfont.pc -SOURCES = -DIST_SOURCES = -RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \ - html-recursive info-recursive install-data-recursive \ - install-dvi-recursive install-exec-recursive \ - install-html-recursive install-info-recursive \ - install-pdf-recursive install-ps-recursive install-recursive \ - installcheck-recursive installdirs-recursive pdf-recursive \ - ps-recursive uninstall-recursive -am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; -am__vpath_adj = case $$p in \ - $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \ - *) f=$$p;; \ - esac; -am__strip_dir = `echo $$p | sed -e 's|^.*/||'`; -am__installdirs = "$(DESTDIR)$(pkgconfigdir)" \ - "$(DESTDIR)$(libXfontincludedir)" \ - "$(DESTDIR)$(libXfontincludedir)" -pkgconfigDATA_INSTALL = $(INSTALL_DATA) -DATA = $(noinst_DATA) $(pkgconfig_DATA) -libXfontincludeHEADERS_INSTALL = $(INSTALL_HEADER) -nodist_libXfontincludeHEADERS_INSTALL = $(INSTALL_HEADER) -HEADERS = $(libXfontinclude_HEADERS) $(nodist_libXfontinclude_HEADERS) -RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \ - distclean-recursive maintainer-clean-recursive -ETAGS = etags -CTAGS = ctags -DIST_SUBDIRS = $(SUBDIRS) -DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) -distdir = $(PACKAGE)-$(VERSION) -top_distdir = $(distdir) -am__remove_distdir = \ - { test ! -d $(distdir) \ - || { find $(distdir) -type d ! -perm -200 -exec chmod u+w {} ';' \ - && rm -fr $(distdir); }; } -DIST_ARCHIVES = $(distdir).tar.gz $(distdir).tar.bz2 -GZIP_ENV = --best -distuninstallcheck_listfiles = find . -type f -print -distcleancheck_listfiles = find . -type f -print -ACLOCAL = @ACLOCAL@ -ADMIN_MAN_DIR = @ADMIN_MAN_DIR@ -ADMIN_MAN_SUFFIX = @ADMIN_MAN_SUFFIX@ -AMTAR = @AMTAR@ -AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@ -APP_MAN_DIR = @APP_MAN_DIR@ -APP_MAN_SUFFIX = @APP_MAN_SUFFIX@ -AR = @AR@ -AUTOCONF = @AUTOCONF@ -AUTOHEADER = @AUTOHEADER@ -AUTOMAKE = @AUTOMAKE@ -AWK = @AWK@ -CC = @CC@ -CCDEPMODE = @CCDEPMODE@ -CFLAGS = @CFLAGS@ -CHANGELOG_CMD = @CHANGELOG_CMD@ -CPP = @CPP@ -CPPFLAGS = @CPPFLAGS@ -CWARNFLAGS = @CWARNFLAGS@ -CYGPATH_W = @CYGPATH_W@ -DEFS = @DEFS@ -DEPDIR = @DEPDIR@ -DRIVER_MAN_DIR = @DRIVER_MAN_DIR@ -DRIVER_MAN_SUFFIX = @DRIVER_MAN_SUFFIX@ -DSYMUTIL = @DSYMUTIL@ -DUMPBIN = @DUMPBIN@ -ECHO_C = @ECHO_C@ -ECHO_N = @ECHO_N@ -ECHO_T = @ECHO_T@ -EGREP = @EGREP@ -EXEEXT = @EXEEXT@ -FGREP = @FGREP@ -FILE_MAN_DIR = @FILE_MAN_DIR@ -FILE_MAN_SUFFIX = @FILE_MAN_SUFFIX@ -FOP = @FOP@ -FREETYPE_CFLAGS = @FREETYPE_CFLAGS@ -FREETYPE_LIBS = @FREETYPE_LIBS@ -FREETYPE_REQUIRES = @FREETYPE_REQUIRES@ -GREP = @GREP@ -INSTALL = @INSTALL@ -INSTALL_CMD = @INSTALL_CMD@ -INSTALL_DATA = @INSTALL_DATA@ -INSTALL_PROGRAM = @INSTALL_PROGRAM@ -INSTALL_SCRIPT = @INSTALL_SCRIPT@ -INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ -LD = @LD@ -LDFLAGS = @LDFLAGS@ -LIBOBJS = @LIBOBJS@ -LIBS = @LIBS@ -LIBTOOL = @LIBTOOL@ -LIB_MAN_DIR = @LIB_MAN_DIR@ -LIB_MAN_SUFFIX = @LIB_MAN_SUFFIX@ -LIPO = @LIPO@ -LN_S = @LN_S@ -LTLIBOBJS = @LTLIBOBJS@ -MAINT = @MAINT@ -MAKEINFO = @MAKEINFO@ -MAN_SUBSTS = @MAN_SUBSTS@ -MATH_LIBS = @MATH_LIBS@ -MISC_MAN_DIR = @MISC_MAN_DIR@ -MISC_MAN_SUFFIX = @MISC_MAN_SUFFIX@ -MKDIR_P = @MKDIR_P@ -NM = @NM@ -NMEDIT = @NMEDIT@ -OBJDUMP = @OBJDUMP@ -OBJEXT = @OBJEXT@ -OS_CFLAGS = @OS_CFLAGS@ -OTOOL = @OTOOL@ -OTOOL64 = @OTOOL64@ -PACKAGE = @PACKAGE@ -PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ -PACKAGE_NAME = @PACKAGE_NAME@ -PACKAGE_STRING = @PACKAGE_STRING@ -PACKAGE_TARNAME = @PACKAGE_TARNAME@ -PACKAGE_VERSION = @PACKAGE_VERSION@ -PATH_SEPARATOR = @PATH_SEPARATOR@ -PKG_CONFIG = @PKG_CONFIG@ -RANLIB = @RANLIB@ -SED = @SED@ -SET_MAKE = @SET_MAKE@ -SHELL = @SHELL@ -STRIP = @STRIP@ -VERSION = @VERSION@ -XFONT_CFLAGS = @XFONT_CFLAGS@ -XFONT_LIBS = @XFONT_LIBS@ -XMLTO = @XMLTO@ -XORG_MAN_PAGE = @XORG_MAN_PAGE@ -X_GZIP_FONT_COMPRESSION = @X_GZIP_FONT_COMPRESSION@ -Z_LIBS = @Z_LIBS@ -abs_builddir = @abs_builddir@ -abs_srcdir = @abs_srcdir@ -abs_top_builddir = @abs_top_builddir@ -abs_top_srcdir = @abs_top_srcdir@ -ac_ct_CC = @ac_ct_CC@ -ac_ct_DUMPBIN = @ac_ct_DUMPBIN@ -am__include = @am__include@ -am__leading_dot = @am__leading_dot@ -am__quote = @am__quote@ -am__tar = @am__tar@ -am__untar = @am__untar@ -bindir = @bindir@ -build = @build@ -build_alias = @build_alias@ -build_cpu = @build_cpu@ -build_os = @build_os@ -build_vendor = @build_vendor@ -builddir = @builddir@ -datadir = @datadir@ -datarootdir = @datarootdir@ -docdir = @docdir@ -dvidir = @dvidir@ -exec_prefix = @exec_prefix@ -ft_config = @ft_config@ -host = @host@ -host_alias = @host_alias@ -host_cpu = @host_cpu@ -host_os = @host_os@ -host_vendor = @host_vendor@ -htmldir = @htmldir@ -includedir = @includedir@ -infodir = @infodir@ -install_sh = @install_sh@ -libdir = @libdir@ -libexecdir = @libexecdir@ -localedir = @localedir@ -localstatedir = @localstatedir@ -lt_ECHO = @lt_ECHO@ -mandir = @mandir@ -mkdir_p = @mkdir_p@ -oldincludedir = @oldincludedir@ -pdfdir = @pdfdir@ -prefix = @prefix@ -program_transform_name = @program_transform_name@ -psdir = @psdir@ -sbindir = @sbindir@ -sharedstatedir = @sharedstatedir@ -srcdir = @srcdir@ -sysconfdir = @sysconfdir@ -target_alias = @target_alias@ -top_build_prefix = @top_build_prefix@ -top_builddir = @top_builddir@ -top_srcdir = @top_srcdir@ -SUBDIRS = src -libXfontincludedir = $(includedir)/X11/fonts -libXfontinclude_HEADERS = \ - include/X11/fonts/bdfint.h \ - include/X11/fonts/bitmap.h \ - include/X11/fonts/bufio.h \ - include/X11/fonts/fntfil.h \ - include/X11/fonts/fntfilio.h \ - include/X11/fonts/fntfilst.h \ - include/X11/fonts/fontencc.h \ - include/X11/fonts/fontmisc.h \ - include/X11/fonts/fontshow.h \ - include/X11/fonts/fontutil.h \ - include/X11/fonts/fontxlfd.h \ - include/X11/fonts/pcf.h \ - src/FreeType/ft.h \ - src/FreeType/ftfuncs.h - -nodist_libXfontinclude_HEADERS = \ - include/X11/fonts/fontconf.h - -pkgconfigdir = $(libdir)/pkgconfig -pkgconfig_DATA = xfont.pc -MAINTAINERCLEANFILES = ChangeLog INSTALL - -# Developer documentation - not installed on system -EXTRA_DIST = doc/fontlib.xml doc/fontlib.xsl doc/fontlib.css -@ENABLE_DEVEL_DOCS_TRUE@@HAVE_XMLTO_TRUE@noinst_DATA = \ -@ENABLE_DEVEL_DOCS_TRUE@@HAVE_XMLTO_TRUE@ doc/fontlib.txt \ -@ENABLE_DEVEL_DOCS_TRUE@@HAVE_XMLTO_TRUE@ doc/fontlib.html \ -@ENABLE_DEVEL_DOCS_TRUE@@HAVE_XMLTO_TRUE@ $(srcdir)/doc/fontlib.css \ -@ENABLE_DEVEL_DOCS_TRUE@@HAVE_XMLTO_TRUE@ $(am__append_1) -@ENABLE_DEVEL_DOCS_TRUE@@HAVE_XMLTO_TRUE@CLEANFILES = doc/fontlib.txt doc/fontlib.html doc/fontlib.pdf doc/fontlib.ps -all: config.h - $(MAKE) $(AM_MAKEFLAGS) all-recursive - -.SUFFIXES: -am--refresh: - @: -$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(am__configure_deps) - @for dep in $?; do \ - case '$(am__configure_deps)' in \ - *$$dep*) \ - echo ' cd $(srcdir) && $(AUTOMAKE) --foreign '; \ - cd $(srcdir) && $(AUTOMAKE) --foreign \ - && exit 0; \ - exit 1;; \ - esac; \ - done; \ - echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign Makefile'; \ - cd $(top_srcdir) && \ - $(AUTOMAKE) --foreign Makefile -.PRECIOUS: Makefile -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status - @case '$?' in \ - *config.status*) \ - echo ' $(SHELL) ./config.status'; \ - $(SHELL) ./config.status;; \ - *) \ - echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe)'; \ - cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe);; \ - esac; - -$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) - $(SHELL) ./config.status --recheck - -$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps) - cd $(srcdir) && $(AUTOCONF) -$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps) - cd $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS) - -config.h: stamp-h1 - @if test ! -f $@; then \ - rm -f stamp-h1; \ - $(MAKE) $(AM_MAKEFLAGS) stamp-h1; \ - else :; fi - -stamp-h1: $(srcdir)/config.h.in $(top_builddir)/config.status - @rm -f stamp-h1 - cd $(top_builddir) && $(SHELL) ./config.status config.h -$(srcdir)/config.h.in: @MAINTAINER_MODE_TRUE@ $(am__configure_deps) - cd $(top_srcdir) && $(AUTOHEADER) - rm -f stamp-h1 - touch $@ - -include/X11/fonts/fontconf.h: include/X11/fonts/stamp-h2 - @if test ! -f $@; then \ - rm -f include/X11/fonts/stamp-h2; \ - $(MAKE) $(AM_MAKEFLAGS) include/X11/fonts/stamp-h2; \ - else :; fi - -include/X11/fonts/stamp-h2: $(top_srcdir)/include/X11/fonts/fontconf.h.in $(top_builddir)/config.status - @rm -f include/X11/fonts/stamp-h2 - cd $(top_builddir) && $(SHELL) ./config.status include/X11/fonts/fontconf.h - -distclean-hdr: - -rm -f config.h stamp-h1 include/X11/fonts/fontconf.h include/X11/fonts/stamp-h2 -xfont.pc: $(top_builddir)/config.status $(srcdir)/xfont.pc.in - cd $(top_builddir) && $(SHELL) ./config.status $@ - -mostlyclean-libtool: - -rm -f *.lo - -clean-libtool: - -rm -rf .libs _libs - -distclean-libtool: - -rm -f libtool config.lt -install-pkgconfigDATA: $(pkgconfig_DATA) - @$(NORMAL_INSTALL) - test -z "$(pkgconfigdir)" || $(MKDIR_P) "$(DESTDIR)$(pkgconfigdir)" - @list='$(pkgconfig_DATA)'; for p in $$list; do \ - if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ - f=$(am__strip_dir) \ - echo " $(pkgconfigDATA_INSTALL) '$$d$$p' '$(DESTDIR)$(pkgconfigdir)/$$f'"; \ - $(pkgconfigDATA_INSTALL) "$$d$$p" "$(DESTDIR)$(pkgconfigdir)/$$f"; \ - done - -uninstall-pkgconfigDATA: - @$(NORMAL_UNINSTALL) - @list='$(pkgconfig_DATA)'; for p in $$list; do \ - f=$(am__strip_dir) \ - echo " rm -f '$(DESTDIR)$(pkgconfigdir)/$$f'"; \ - rm -f "$(DESTDIR)$(pkgconfigdir)/$$f"; \ - done -install-libXfontincludeHEADERS: $(libXfontinclude_HEADERS) - @$(NORMAL_INSTALL) - test -z "$(libXfontincludedir)" || $(MKDIR_P) "$(DESTDIR)$(libXfontincludedir)" - @list='$(libXfontinclude_HEADERS)'; for p in $$list; do \ - if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ - f=$(am__strip_dir) \ - echo " $(libXfontincludeHEADERS_INSTALL) '$$d$$p' '$(DESTDIR)$(libXfontincludedir)/$$f'"; \ - $(libXfontincludeHEADERS_INSTALL) "$$d$$p" "$(DESTDIR)$(libXfontincludedir)/$$f"; \ - done - -uninstall-libXfontincludeHEADERS: - @$(NORMAL_UNINSTALL) - @list='$(libXfontinclude_HEADERS)'; for p in $$list; do \ - f=$(am__strip_dir) \ - echo " rm -f '$(DESTDIR)$(libXfontincludedir)/$$f'"; \ - rm -f "$(DESTDIR)$(libXfontincludedir)/$$f"; \ - done -install-nodist_libXfontincludeHEADERS: $(nodist_libXfontinclude_HEADERS) - @$(NORMAL_INSTALL) - test -z "$(libXfontincludedir)" || $(MKDIR_P) "$(DESTDIR)$(libXfontincludedir)" - @list='$(nodist_libXfontinclude_HEADERS)'; for p in $$list; do \ - if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ - f=$(am__strip_dir) \ - echo " $(nodist_libXfontincludeHEADERS_INSTALL) '$$d$$p' '$(DESTDIR)$(libXfontincludedir)/$$f'"; \ - $(nodist_libXfontincludeHEADERS_INSTALL) "$$d$$p" "$(DESTDIR)$(libXfontincludedir)/$$f"; \ - done - -uninstall-nodist_libXfontincludeHEADERS: - @$(NORMAL_UNINSTALL) - @list='$(nodist_libXfontinclude_HEADERS)'; for p in $$list; do \ - f=$(am__strip_dir) \ - echo " rm -f '$(DESTDIR)$(libXfontincludedir)/$$f'"; \ - rm -f "$(DESTDIR)$(libXfontincludedir)/$$f"; \ - done - -# This directory's subdirectories are mostly independent; you can cd -# into them and run `make' without going through this Makefile. -# To change the values of `make' variables: instead of editing Makefiles, -# (1) if the variable is set in `config.status', edit `config.status' -# (which will cause the Makefiles to be regenerated when you run `make'); -# (2) otherwise, pass the desired values on the `make' command line. -$(RECURSIVE_TARGETS): - @failcom='exit 1'; \ - for f in x $$MAKEFLAGS; do \ - case $$f in \ - *=* | --[!k]*);; \ - *k*) failcom='fail=yes';; \ - esac; \ - done; \ - dot_seen=no; \ - target=`echo $@ | sed s/-recursive//`; \ - list='$(SUBDIRS)'; for subdir in $$list; do \ - echo "Making $$target in $$subdir"; \ - if test "$$subdir" = "."; then \ - dot_seen=yes; \ - local_target="$$target-am"; \ - else \ - local_target="$$target"; \ - fi; \ - (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ - || eval $$failcom; \ - done; \ - if test "$$dot_seen" = "no"; then \ - $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \ - fi; test -z "$$fail" - -$(RECURSIVE_CLEAN_TARGETS): - @failcom='exit 1'; \ - for f in x $$MAKEFLAGS; do \ - case $$f in \ - *=* | --[!k]*);; \ - *k*) failcom='fail=yes';; \ - esac; \ - done; \ - dot_seen=no; \ - case "$@" in \ - distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \ - *) list='$(SUBDIRS)' ;; \ - esac; \ - rev=''; for subdir in $$list; do \ - if test "$$subdir" = "."; then :; else \ - rev="$$subdir $$rev"; \ - fi; \ - done; \ - rev="$$rev ."; \ - target=`echo $@ | sed s/-recursive//`; \ - for subdir in $$rev; do \ - echo "Making $$target in $$subdir"; \ - if test "$$subdir" = "."; then \ - local_target="$$target-am"; \ - else \ - local_target="$$target"; \ - fi; \ - (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ - || eval $$failcom; \ - done && test -z "$$fail" -tags-recursive: - list='$(SUBDIRS)'; for subdir in $$list; do \ - test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \ - done -ctags-recursive: - list='$(SUBDIRS)'; for subdir in $$list; do \ - test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \ - done - -ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES) - list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ - unique=`for i in $$list; do \ - if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ - done | \ - $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ - END { if (nonempty) { for (i in files) print i; }; }'`; \ - mkid -fID $$unique -tags: TAGS - -TAGS: tags-recursive $(HEADERS) $(SOURCES) config.h.in $(TAGS_DEPENDENCIES) \ - $(TAGS_FILES) $(LISP) - tags=; \ - here=`pwd`; \ - if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \ - include_option=--etags-include; \ - empty_fix=.; \ - else \ - include_option=--include; \ - empty_fix=; \ - fi; \ - list='$(SUBDIRS)'; for subdir in $$list; do \ - if test "$$subdir" = .; then :; else \ - test ! -f $$subdir/TAGS || \ - tags="$$tags $$include_option=$$here/$$subdir/TAGS"; \ - fi; \ - done; \ - list='$(SOURCES) $(HEADERS) config.h.in $(LISP) $(TAGS_FILES)'; \ - unique=`for i in $$list; do \ - if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ - done | \ - $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ - END { if (nonempty) { for (i in files) print i; }; }'`; \ - if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \ - test -n "$$unique" || unique=$$empty_fix; \ - $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ - $$tags $$unique; \ - fi -ctags: CTAGS -CTAGS: ctags-recursive $(HEADERS) $(SOURCES) config.h.in $(TAGS_DEPENDENCIES) \ - $(TAGS_FILES) $(LISP) - tags=; \ - list='$(SOURCES) $(HEADERS) config.h.in $(LISP) $(TAGS_FILES)'; \ - unique=`for i in $$list; do \ - if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ - done | \ - $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ - END { if (nonempty) { for (i in files) print i; }; }'`; \ - test -z "$(CTAGS_ARGS)$$tags$$unique" \ - || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \ - $$tags $$unique - -GTAGS: - here=`$(am__cd) $(top_builddir) && pwd` \ - && cd $(top_srcdir) \ - && gtags -i $(GTAGS_ARGS) $$here - -distclean-tags: - -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags - -distdir: $(DISTFILES) - $(am__remove_distdir) - test -d $(distdir) || mkdir $(distdir) - @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ - topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ - list='$(DISTFILES)'; \ - dist_files=`for file in $$list; do echo $$file; done | \ - sed -e "s|^$$srcdirstrip/||;t" \ - -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ - case $$dist_files in \ - */*) $(MKDIR_P) `echo "$$dist_files" | \ - sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ - sort -u` ;; \ - esac; \ - for file in $$dist_files; do \ - if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ - if test -d $$d/$$file; then \ - dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ - if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ - cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \ - fi; \ - cp -pR $$d/$$file $(distdir)$$dir || exit 1; \ - else \ - test -f $(distdir)/$$file \ - || cp -p $$d/$$file $(distdir)/$$file \ - || exit 1; \ - fi; \ - done - list='$(DIST_SUBDIRS)'; for subdir in $$list; do \ - if test "$$subdir" = .; then :; else \ - test -d "$(distdir)/$$subdir" \ - || $(MKDIR_P) "$(distdir)/$$subdir" \ - || exit 1; \ - distdir=`$(am__cd) $(distdir) && pwd`; \ - top_distdir=`$(am__cd) $(top_distdir) && pwd`; \ - (cd $$subdir && \ - $(MAKE) $(AM_MAKEFLAGS) \ - top_distdir="$$top_distdir" \ - distdir="$$distdir/$$subdir" \ - am__remove_distdir=: \ - am__skip_length_check=: \ - distdir) \ - || exit 1; \ - fi; \ - done - $(MAKE) $(AM_MAKEFLAGS) \ - top_distdir="$(top_distdir)" distdir="$(distdir)" \ - dist-hook - -find $(distdir) -type d ! -perm -777 -exec chmod a+rwx {} \; -o \ - ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \ - ! -type d ! -perm -400 -exec chmod a+r {} \; -o \ - ! -type d ! -perm -444 -exec $(install_sh) -c -m a+r {} {} \; \ - || chmod -R a+r $(distdir) -dist-gzip: distdir - tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz - $(am__remove_distdir) -dist-bzip2: distdir - tardir=$(distdir) && $(am__tar) | bzip2 -9 -c >$(distdir).tar.bz2 - $(am__remove_distdir) - -dist-lzma: distdir - tardir=$(distdir) && $(am__tar) | lzma -9 -c >$(distdir).tar.lzma - $(am__remove_distdir) - -dist-tarZ: distdir - tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z - $(am__remove_distdir) - -dist-shar: distdir - shar $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).shar.gz - $(am__remove_distdir) - -dist-zip: distdir - -rm -f $(distdir).zip - zip -rq $(distdir).zip $(distdir) - $(am__remove_distdir) - -dist dist-all: distdir - tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz - tardir=$(distdir) && $(am__tar) | bzip2 -9 -c >$(distdir).tar.bz2 - $(am__remove_distdir) - -# This target untars the dist file and tries a VPATH configuration. Then -# it guarantees that the distribution is self-contained by making another -# tarfile. -distcheck: dist - case '$(DIST_ARCHIVES)' in \ - *.tar.gz*) \ - GZIP=$(GZIP_ENV) gunzip -c $(distdir).tar.gz | $(am__untar) ;;\ - *.tar.bz2*) \ - bunzip2 -c $(distdir).tar.bz2 | $(am__untar) ;;\ - *.tar.lzma*) \ - unlzma -c $(distdir).tar.lzma | $(am__untar) ;;\ - *.tar.Z*) \ - uncompress -c $(distdir).tar.Z | $(am__untar) ;;\ - *.shar.gz*) \ - GZIP=$(GZIP_ENV) gunzip -c $(distdir).shar.gz | unshar ;;\ - *.zip*) \ - unzip $(distdir).zip ;;\ - esac - chmod -R a-w $(distdir); chmod a+w $(distdir) - mkdir $(distdir)/_build - mkdir $(distdir)/_inst - chmod a-w $(distdir) - dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \ - && dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \ - && cd $(distdir)/_build \ - && ../configure --srcdir=.. --prefix="$$dc_install_base" \ - $(DISTCHECK_CONFIGURE_FLAGS) \ - && $(MAKE) $(AM_MAKEFLAGS) \ - && $(MAKE) $(AM_MAKEFLAGS) dvi \ - && $(MAKE) $(AM_MAKEFLAGS) check \ - && $(MAKE) $(AM_MAKEFLAGS) install \ - && $(MAKE) $(AM_MAKEFLAGS) installcheck \ - && $(MAKE) $(AM_MAKEFLAGS) uninstall \ - && $(MAKE) $(AM_MAKEFLAGS) distuninstallcheck_dir="$$dc_install_base" \ - distuninstallcheck \ - && chmod -R a-w "$$dc_install_base" \ - && ({ \ - (cd ../.. && umask 077 && mkdir "$$dc_destdir") \ - && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" install \ - && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" uninstall \ - && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" \ - distuninstallcheck_dir="$$dc_destdir" distuninstallcheck; \ - } || { rm -rf "$$dc_destdir"; exit 1; }) \ - && rm -rf "$$dc_destdir" \ - && $(MAKE) $(AM_MAKEFLAGS) dist \ - && rm -rf $(DIST_ARCHIVES) \ - && $(MAKE) $(AM_MAKEFLAGS) distcleancheck - $(am__remove_distdir) - @(echo "$(distdir) archives ready for distribution: "; \ - list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \ - sed -e 1h -e 1s/./=/g -e 1p -e 1x -e '$$p' -e '$$x' -distuninstallcheck: - @cd $(distuninstallcheck_dir) \ - && test `$(distuninstallcheck_listfiles) | wc -l` -le 1 \ - || { echo "ERROR: files left after uninstall:" ; \ - if test -n "$(DESTDIR)"; then \ - echo " (check DESTDIR support)"; \ - fi ; \ - $(distuninstallcheck_listfiles) ; \ - exit 1; } >&2 -distcleancheck: distclean - @if test '$(srcdir)' = . ; then \ - echo "ERROR: distcleancheck can only run from a VPATH build" ; \ - exit 1 ; \ - fi - @test `$(distcleancheck_listfiles) | wc -l` -eq 0 \ - || { echo "ERROR: files left in build directory after distclean:" ; \ - $(distcleancheck_listfiles) ; \ - exit 1; } >&2 -check-am: all-am -check: check-recursive -all-am: Makefile $(DATA) $(HEADERS) config.h -installdirs: installdirs-recursive -installdirs-am: - for dir in "$(DESTDIR)$(pkgconfigdir)" "$(DESTDIR)$(libXfontincludedir)" "$(DESTDIR)$(libXfontincludedir)"; do \ - test -z "$$dir" || $(MKDIR_P) "$$dir"; \ - done -install: install-recursive -install-exec: install-exec-recursive -install-data: install-data-recursive -uninstall: uninstall-recursive - -install-am: all-am - @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am - -installcheck: installcheck-recursive -install-strip: - $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ - install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ - `test -z '$(STRIP)' || \ - echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install -mostlyclean-generic: - -clean-generic: - -test -z "$(CLEANFILES)" || rm -f $(CLEANFILES) - -distclean-generic: - -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) - -maintainer-clean-generic: - @echo "This command is intended for maintainers to use" - @echo "it deletes files that may require special tools to rebuild." - -test -z "$(MAINTAINERCLEANFILES)" || rm -f $(MAINTAINERCLEANFILES) -clean: clean-recursive - -clean-am: clean-generic clean-libtool mostlyclean-am - -distclean: distclean-recursive - -rm -f $(am__CONFIG_DISTCLEAN_FILES) - -rm -f Makefile -distclean-am: clean-am distclean-generic distclean-hdr \ - distclean-libtool distclean-tags - -dvi: dvi-recursive - -dvi-am: - -html: html-recursive - -info: info-recursive - -info-am: - -install-data-am: install-libXfontincludeHEADERS \ - install-nodist_libXfontincludeHEADERS install-pkgconfigDATA - -install-dvi: install-dvi-recursive - -install-exec-am: - -install-html: install-html-recursive - -install-info: install-info-recursive - -install-man: - -install-pdf: install-pdf-recursive - -install-ps: install-ps-recursive - -installcheck-am: - -maintainer-clean: maintainer-clean-recursive - -rm -f $(am__CONFIG_DISTCLEAN_FILES) - -rm -rf $(top_srcdir)/autom4te.cache - -rm -f Makefile -maintainer-clean-am: distclean-am maintainer-clean-generic - -mostlyclean: mostlyclean-recursive - -mostlyclean-am: mostlyclean-generic mostlyclean-libtool - -pdf: pdf-recursive - -pdf-am: - -ps: ps-recursive - -ps-am: - -uninstall-am: uninstall-libXfontincludeHEADERS \ - uninstall-nodist_libXfontincludeHEADERS \ - uninstall-pkgconfigDATA - -.MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) install-am \ - install-strip - -.PHONY: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) CTAGS GTAGS \ - all all-am am--refresh check check-am clean clean-generic \ - clean-libtool ctags ctags-recursive dist dist-all dist-bzip2 \ - dist-gzip dist-hook dist-lzma dist-shar dist-tarZ dist-zip \ - distcheck distclean distclean-generic distclean-hdr \ - distclean-libtool distclean-tags distcleancheck distdir \ - distuninstallcheck dvi dvi-am html html-am info info-am \ - install install-am install-data install-data-am install-dvi \ - install-dvi-am install-exec install-exec-am install-html \ - install-html-am install-info install-info-am \ - install-libXfontincludeHEADERS install-man \ - install-nodist_libXfontincludeHEADERS install-pdf \ - install-pdf-am install-pkgconfigDATA install-ps install-ps-am \ - install-strip installcheck installcheck-am installdirs \ - installdirs-am maintainer-clean maintainer-clean-generic \ - mostlyclean mostlyclean-generic mostlyclean-libtool pdf pdf-am \ - ps ps-am tags tags-recursive uninstall uninstall-am \ - uninstall-libXfontincludeHEADERS \ - uninstall-nodist_libXfontincludeHEADERS \ - uninstall-pkgconfigDATA - - -.PHONY: ChangeLog INSTALL - -INSTALL: - $(INSTALL_CMD) - -ChangeLog: - $(CHANGELOG_CMD) - -dist-hook: ChangeLog INSTALL - -@ENABLE_DEVEL_DOCS_TRUE@@HAVE_XMLTO_TRUE@doc/fontlib.txt: $(srcdir)/doc/fontlib.xml $(srcdir)/doc/fontlib.xsl -@ENABLE_DEVEL_DOCS_TRUE@@HAVE_XMLTO_TRUE@ $(AM_V_GEN)$(XMLTO) -m $(srcdir)/doc/fontlib.xsl -o doc txt $(srcdir)/doc/fontlib.xml - -@ENABLE_DEVEL_DOCS_TRUE@@HAVE_XMLTO_TRUE@doc/fontlib.html: $(srcdir)/doc/fontlib.xml $(srcdir)/doc/fontlib.xsl -@ENABLE_DEVEL_DOCS_TRUE@@HAVE_XMLTO_TRUE@ $(AM_V_GEN)$(XMLTO) -m $(srcdir)/doc/fontlib.xsl -o doc xhtml-nochunks $(srcdir)/doc/fontlib.xml - -@ENABLE_DEVEL_DOCS_TRUE@@HAVE_XMLTO_TRUE@doc/fontlib.pdf: $(srcdir)/doc/fontlib.xml $(srcdir)/doc/fontlib.xsl -@ENABLE_DEVEL_DOCS_TRUE@@HAVE_XMLTO_TRUE@ $(AM_V_GEN)$(XMLTO) --with-fop -m $(srcdir)/doc/fontlib.xsl -o doc pdf $(srcdir)/doc/fontlib.xml - -@ENABLE_DEVEL_DOCS_TRUE@@HAVE_XMLTO_TRUE@doc/fontlib.ps: $(srcdir)/doc/fontlib.xml $(srcdir)/doc/fontlib.xsl -@ENABLE_DEVEL_DOCS_TRUE@@HAVE_XMLTO_TRUE@ $(AM_V_GEN)$(XMLTO) --with-fop -m $(srcdir)/doc/fontlib.xsl -o doc ps $(srcdir)/doc/fontlib.xml -# Tell versions [3.59,3.63) of GNU make to not export all variables. -# Otherwise a system limit (for SysV at least) may be exceeded. -.NOEXPORT: |