aboutsummaryrefslogtreecommitdiff
path: root/libXfont/ltmain.sh
diff options
context:
space:
mode:
Diffstat (limited to 'libXfont/ltmain.sh')
-rw-r--r--libXfont/ltmain.sh9636
1 files changed, 9636 insertions, 0 deletions
diff --git a/libXfont/ltmain.sh b/libXfont/ltmain.sh
new file mode 100644
index 000000000..3061e3c5a
--- /dev/null
+++ b/libXfont/ltmain.sh
@@ -0,0 +1,9636 @@
+
+# libtool (GNU libtool) 2.4
+# Written by Gordon Matzigkeit <gord@gnu.ai.mit.edu>, 1996
+
+# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005, 2006,
+# 2007, 2008, 2009, 2010 Free Software Foundation, Inc.
+# This is free software; see the source for copying conditions. There is NO
+# warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+
+# GNU Libtool is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+#
+# As a special exception to the GNU General Public License,
+# if you distribute this file as part of a program or library that
+# is built using GNU Libtool, you may include this file under the
+# same distribution terms that you use for the rest of that program.
+#
+# GNU Libtool is distributed in the hope that it will be useful, but
+# WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+# General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with GNU Libtool; see the file COPYING. If not, a copy
+# can be downloaded from http://www.gnu.org/licenses/gpl.html,
+# or obtained by writing to the Free Software Foundation, Inc.,
+# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+
+# Usage: $progname [OPTION]... [MODE-ARG]...
+#
+# Provide generalized library-building support services.
+#
+# --config show all configuration variables
+# --debug enable verbose shell tracing
+# -n, --dry-run display commands without modifying any files
+# --features display basic configuration information and exit
+# --mode=MODE use operation mode MODE
+# --preserve-dup-deps don't remove duplicate dependency libraries
+# --quiet, --silent don't print informational messages
+# --no-quiet, --no-silent
+# print informational messages (default)
+# --tag=TAG use configuration variables from tag TAG
+# -v, --verbose print more informational messages than default
+# --no-verbose don't print the extra informational messages
+# --version print version information
+# -h, --help, --help-all print short, long, or detailed help message
+#
+# MODE must be one of the following:
+#
+# clean remove files from the build directory
+# compile compile a source file into a libtool object
+# execute automatically set library path, then run a program
+# finish complete the installation of libtool libraries
+# install install libraries or executables
+# link create a library or an executable
+# uninstall remove libraries from an installed directory
+#
+# MODE-ARGS vary depending on the MODE. When passed as first option,
+# `--mode=MODE' may be abbreviated as `MODE' or a unique abbreviation of that.
+# Try `$progname --help --mode=MODE' for a more detailed description of MODE.
+#
+# When reporting a bug, please describe a test case to reproduce it and
+# include the following information:
+#
+# host-triplet: $host
+# shell: $SHELL
+# compiler: $LTCC
+# compiler flags: $LTCFLAGS
+# linker: $LD (gnu? $with_gnu_ld)
+# $progname: (GNU libtool) 2.4
+# automake: $automake_version
+# autoconf: $autoconf_version
+#
+# Report bugs to <bug-libtool@gnu.org>.
+# GNU libtool home page: <http://www.gnu.org/software/libtool/>.
+# General help using GNU software: <http://www.gnu.org/gethelp/>.
+
+PROGRAM=libtool
+PACKAGE=libtool
+VERSION=2.4
+TIMESTAMP=""
+package_revision=1.3293
+
+# Be Bourne compatible
+if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
+ emulate sh
+ NULLCMD=:
+ # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which
+ # is contrary to our usage. Disable this feature.
+ alias -g '${1+"$@"}'='"$@"'
+ setopt NO_GLOB_SUBST
+else
+ case `(set -o) 2>/dev/null` in *posix*) set -o posix;; esac
+fi
+BIN_SH=xpg4; export BIN_SH # for Tru64
+DUALCASE=1; export DUALCASE # for MKS sh
+
+# A function that is used when there is no print builtin or printf.
+func_fallback_echo ()
+{
+ eval 'cat <<_LTECHO_EOF
+$1
+_LTECHO_EOF'
+}
+
+# NLS nuisances: We save the old values to restore during execute mode.
+lt_user_locale=
+lt_safe_locale=
+for lt_var in LANG LANGUAGE LC_ALL LC_CTYPE LC_COLLATE LC_MESSAGES
+do
+ eval "if test \"\${$lt_var+set}\" = set; then
+ save_$lt_var=\$$lt_var
+ $lt_var=C
+ export $lt_var
+ lt_user_locale=\"$lt_var=\\\$save_\$lt_var; \$lt_user_locale\"
+ lt_safe_locale=\"$lt_var=C; \$lt_safe_locale\"
+ fi"
+done
+LC_ALL=C
+LANGUAGE=C
+export LANGUAGE LC_ALL
+
+$lt_unset CDPATH
+
+
+# Work around backward compatibility issue on IRIX 6.5. On IRIX 6.4+, sh
+# is ksh but when the shell is invoked as "sh" and the current value of
+# the _XPG environment variable is not equal to 1 (one), the special
+# positional parameter $0, within a function call, is the name of the
+# function.
+progpath="$0"
+
+
+
+: ${CP="cp -f"}
+test "${ECHO+set}" = set || ECHO=${as_echo-'printf %s\n'}
+: ${EGREP="grep -E"}
+: ${FGREP="grep -F"}
+: ${GREP="grep"}
+: ${LN_S="ln -s"}
+: ${MAKE="make"}
+: ${MKDIR="mkdir"}
+: ${MV="mv -f"}
+: ${RM="rm -f"}
+: ${SED="sed"}
+: ${SHELL="${CONFIG_SHELL-/bin/sh}"}
+: ${Xsed="$SED -e 1s/^X//"}
+
+# Global variables:
+EXIT_SUCCESS=0
+EXIT_FAILURE=1
+EXIT_MISMATCH=63 # $? = 63 is used to indicate version mismatch to missing.
+EXIT_SKIP=77 # $? = 77 is used to indicate a skipped test to automake.
+
+exit_status=$EXIT_SUCCESS
+
+# Make sure IFS has a sensible default
+lt_nl='
+'
+IFS=" $lt_nl"
+
+dirname="s,/[^/]*$,,"
+basename="s,^.*/,,"
+
+# func_dirname file append nondir_replacement
+# Compute the dirname of FILE. If nonempty, add APPEND to the result,
+# otherwise set result to NONDIR_REPLACEMENT.
+func_dirname ()
+{
+ func_dirname_result=`$ECHO "${1}" | $SED "$dirname"`
+ if test "X$func_dirname_result" = "X${1}"; then
+ func_dirname_result="${3}"
+ else
+ func_dirname_result="$func_dirname_result${2}"
+ fi
+} # func_dirname may be replaced by extended shell implementation
+
+
+# func_basename file
+func_basename ()
+{
+ func_basename_result=`$ECHO "${1}" | $SED "$basename"`
+} # func_basename may be replaced by extended shell implementation
+
+
+# func_dirname_and_basename file append nondir_replacement
+# perform func_basename and func_dirname in a single function
+# call:
+# dirname: Compute the dirname of FILE. If nonempty,
+# add APPEND to the result, otherwise set result
+# to NONDIR_REPLACEMENT.
+# value returned in "$func_dirname_result"
+# basename: Compute filename of FILE.
+# value retuned in "$func_basename_result"
+# Implementation must be kept synchronized with func_dirname
+# and func_basename. For efficiency, we do not delegate to
+# those functions but instead duplicate the functionality here.
+func_dirname_and_basename ()
+{
+ # Extract subdirectory from the argument.
+ func_dirname_result=`$ECHO "${1}" | $SED -e "$dirname"`
+ if test "X$func_dirname_result" = "X${1}"; then
+ func_dirname_result="${3}"
+ else
+ func_dirname_result="$func_dirname_result${2}"
+ fi
+ func_basename_result=`$ECHO "${1}" | $SED -e "$basename"`
+} # func_dirname_and_basename may be replaced by extended shell implementation
+
+
+# func_stripname prefix suffix name
+# strip PREFIX and SUFFIX off of NAME.
+# PREFIX and SUFFIX must not contain globbing or regex special
+# characters, hashes, percent signs, but SUFFIX may contain a leading
+# dot (in which case that matches only a dot).
+# func_strip_suffix prefix name
+func_stripname ()
+{
+ case ${2} in
+ .*) func_stripname_result=`$ECHO "${3}" | $SED "s%^${1}%%; s%\\\\${2}\$%%"`;;
+ *) func_stripname_result=`$ECHO "${3}" | $SED "s%^${1}%%; s%${2}\$%%"`;;
+ esac
+} # func_stripname may be replaced by extended shell implementation
+
+
+# These SED scripts presuppose an absolute path with a trailing slash.
+pathcar='s,^/\([^/]*\).*$,\1,'
+pathcdr='s,^/[^/]*,,'
+removedotparts=':dotsl
+ s@/\./@/@g
+ t dotsl
+ s,/\.$,/,'
+collapseslashes='s@/\{1,\}@/@g'
+finalslash='s,/*$,/,'
+
+# func_normal_abspath PATH
+# Remove doubled-up and trailing slashes, "." path components,
+# and cancel out any ".." path components in PATH after making
+# it an absolute path.
+# value returned in "$func_normal_abspath_result"
+func_normal_abspath ()
+{
+ # Start from root dir and reassemble the path.
+ func_normal_abspath_result=
+ func_normal_abspath_tpath=$1
+ func_normal_abspath_altnamespace=
+ case $func_normal_abspath_tpath in
+ "")
+ # Empty path, that just means $cwd.
+ func_stripname '' '/' "`pwd`"
+ func_normal_abspath_result=$func_stripname_result
+ return
+ ;;
+ # The next three entries are used to spot a run of precisely
+ # two leading slashes without using negated character classes;
+ # we take advantage of case's first-match behaviour.
+ ///*)
+ # Unusual form of absolute path, do nothing.
+ ;;
+ //*)
+ # Not necessarily an ordinary path; POSIX reserves leading '//'
+ # and for example Cygwin uses it to access remote file shares
+ # over CIFS/SMB, so we conserve a leading double slash if found.
+ func_normal_abspath_altnamespace=/
+ ;;
+ /*)
+ # Absolute path, do nothing.
+ ;;
+ *)
+ # Relative path, prepend $cwd.
+ func_normal_abspath_tpath=`pwd`/$func_normal_abspath_tpath
+ ;;
+ esac
+ # Cancel out all the simple stuff to save iterations. We also want
+ # the path to end with a slash for ease of parsing, so make sure
+ # there is one (and only one) here.
+ func_normal_abspath_tpath=`$ECHO "$func_normal_abspath_tpath" | $SED \
+ -e "$removedotparts" -e "$collapseslashes" -e "$finalslash"`
+ while :; do
+ # Processed it all yet?
+ if test "$func_normal_abspath_tpath" = / ; then
+ # If we ascended to the root using ".." the result may be empty now.
+ if test -z "$func_normal_abspath_result" ; then
+ func_normal_abspath_result=/
+ fi
+ break
+ fi
+ func_normal_abspath_tcomponent=`$ECHO "$func_normal_abspath_tpath" | $SED \
+ -e "$pathcar"`
+ func_normal_abspath_tpath=`$ECHO "$func_normal_abspath_tpath" | $SED \
+ -e "$pathcdr"`
+ # Figure out what to do with it
+ case $func_normal_abspath_tcomponent in
+ "")
+ # Trailing empty path component, ignore it.
+ ;;
+ ..)
+ # Parent dir; strip last assembled component from result.
+ func_dirname "$func_normal_abspath_result"
+ func_normal_abspath_result=$func_dirname_result
+ ;;
+ *)
+ # Actual path component, append it.
+ func_normal_abspath_result=$func_normal_abspath_result/$func_normal_abspath_tcomponent
+ ;;
+ esac
+ done
+ # Restore leading double-slash if one was found on entry.
+ func_normal_abspath_result=$func_normal_abspath_altnamespace$func_normal_abspath_result
+}
+
+# func_relative_path SRCDIR DSTDIR
+# generates a relative path from SRCDIR to DSTDIR, with a trailing
+# slash if non-empty, suitable for immediately appending a filename
+# without needing to append a separator.
+# value returned in "$func_relative_path_result"
+func_relative_path ()
+{
+ func_relative_path_result=
+ func_normal_abspath "$1"
+ func_relative_path_tlibdir=$func_normal_abspath_result
+ func_normal_abspath "$2"
+ func_relative_path_tbindir=$func_normal_abspath_result
+
+ # Ascend the tree starting from libdir
+ while :; do
+ # check if we have found a prefix of bindir
+ case $func_relative_path_tbindir in
+ $func_relative_path_tlibdir)
+ # found an exact match
+ func_relative_path_tcancelled=
+ break
+ ;;
+ $func_relative_path_tlibdir*)
+ # found a matching prefix
+ func_stripname "$func_relative_path_tlibdir" '' "$func_relative_path_tbindir"
+ func_relative_path_tcancelled=$func_stripname_result
+ if test -z "$func_relative_path_result"; then
+ func_relative_path_result=.
+ fi
+ break
+ ;;
+ *)
+ func_dirname $func_relative_path_tlibdir
+ func_relative_path_tlibdir=${func_dirname_result}
+ if test "x$func_relative_path_tlibdir" = x ; then
+ # Have to descend all the way to the root!
+ func_relative_path_result=../$func_relative_path_result
+ func_relative_path_tcancelled=$func_relative_path_tbindir
+ break
+ fi
+ func_relative_path_result=../$func_relative_path_result
+ ;;
+ esac
+ done
+
+ # Now calculate path; take care to avoid doubling-up slashes.
+ func_stripname '' '/' "$func_relative_path_result"
+ func_relative_path_result=$func_stripname_result
+ func_stripname '/' '/' "$func_relative_path_tcancelled"
+ if test "x$func_stripname_result" != x ; then
+ func_relative_path_result=${func_relative_path_result}/${func_stripname_result}
+ fi
+
+ # Normalisation. If bindir is libdir, return empty string,
+ # else relative path ending with a slash; either way, target
+ # file name can be directly appended.
+ if test ! -z "$func_relative_path_result"; then
+ func_stripname './' '' "$func_relative_path_result/"
+ func_relative_path_result=$func_stripname_result
+ fi
+}
+
+# The name of this program:
+func_dirname_and_basename "$progpath"
+progname=$func_basename_result
+
+# Make sure we have an absolute path for reexecution:
+case $progpath in
+ [\\/]*|[A-Za-z]:\\*) ;;
+ *[\\/]*)
+ progdir=$func_dirname_result
+ progdir=`cd "$progdir" && pwd`
+ progpath="$progdir/$progname"
+ ;;
+ *)
+ save_IFS="$IFS"
+ IFS=:
+ for progdir in $PATH; do
+ IFS="$save_IFS"
+ test -x "$progdir/$progname" && break
+ done
+ IFS="$save_IFS"
+ test -n "$progdir" || progdir=`pwd`
+ progpath="$progdir/$progname"
+ ;;
+esac
+
+# Sed substitution that helps us do robust quoting. It backslashifies
+# metacharacters that are still active within double-quoted strings.
+Xsed="${SED}"' -e 1s/^X//'
+sed_quote_subst='s/\([`"$\\]\)/\\\1/g'
+
+# Same as above, but do not quote variable references.
+double_quote_subst='s/\(["`\\]\)/\\\1/g'
+
+# Sed substitution that turns a string into a regex matching for the
+# string literally.
+sed_make_literal_regex='s,[].[^$\\*\/],\\&,g'
+
+# Sed substitution that converts a w32 file name or path
+# which contains forward slashes, into one that contains
+# (escaped) backslashes. A very naive implementation.
+lt_sed_naive_backslashify='s|\\\\*|\\|g;s|/|\\|g;s|\\|\\\\|g'
+
+# Re-`\' parameter expansions in output of double_quote_subst that were
+# `\'-ed in input to the same. If an odd number of `\' preceded a '$'
+# in input to double_quote_subst, that '$' was protected from expansion.
+# Since each input `\' is now two `\'s, look for any number of runs of
+# four `\'s followed by two `\'s and then a '$'. `\' that '$'.
+bs='\\'
+bs2='\\\\'
+bs4='\\\\\\\\'
+dollar='\$'
+sed_double_backslash="\
+ s/$bs4/&\\
+/g
+ s/^$bs2$dollar/$bs&/
+ s/\\([^$bs]\\)$bs2$dollar/\\1$bs2$bs$dollar/g
+ s/\n//g"
+
+# Standard options:
+opt_dry_run=false
+opt_help=false
+opt_quiet=false
+opt_verbose=false
+opt_warning=:
+
+# func_echo arg...
+# Echo program name prefixed message, along with the current mode
+# name if it has been set yet.
+func_echo ()
+{
+ $ECHO "$progname: ${opt_mode+$opt_mode: }$*"
+}
+
+# func_verbose arg...
+# Echo program name prefixed message in verbose mode only.
+func_verbose ()
+{
+ $opt_verbose && func_echo ${1+"$@"}
+
+ # A bug in bash halts the script if the last line of a function
+ # fails when set -e is in force, so we need another command to
+ # work around that:
+ :
+}
+
+# func_echo_all arg...
+# Invoke $ECHO with all args, space-separated.
+func_echo_all ()
+{
+ $ECHO "$*"
+}
+
+# func_error arg...
+# Echo program name prefixed message to standard error.
+func_error ()
+{
+ $ECHO "$progname: ${opt_mode+$opt_mode: }"${1+"$@"} 1>&2
+}
+
+# func_warning arg...
+# Echo program name prefixed warning message to standard error.
+func_warning ()
+{
+ $opt_warning && $ECHO "$progname: ${opt_mode+$opt_mode: }warning: "${1+"$@"} 1>&2
+
+ # bash bug again:
+ :
+}
+
+# func_fatal_error arg...
+# Echo program name prefixed message to standard error, and exit.
+func_fatal_error ()
+{
+ func_error ${1+"$@"}
+ exit $EXIT_FAILURE
+}
+
+# func_fatal_help arg...
+# Echo program name prefixed message to standard error, followed by
+# a help hint, and exit.
+func_fatal_help ()
+{
+ func_error ${1+"$@"}
+ func_fatal_error "$help"
+}
+help="Try \`$progname --help' for more information." ## default
+
+
+# func_grep expression filename
+# Check whether EXPRESSION matches any line of FILENAME, without output.
+func_grep ()
+{
+ $GREP "$1" "$2" >/dev/null 2>&1
+}
+
+
+# func_mkdir_p directory-path
+# Make sure the entire path to DIRECTORY-PATH is available.
+func_mkdir_p ()
+{
+ my_directory_path="$1"
+ my_dir_list=
+
+ if test -n "$my_directory_path" && test "$opt_dry_run" != ":"; then
+
+ # Protect directory names starting with `-'
+ case $my_directory_path in
+ -*) my_directory_path="./$my_directory_path" ;;
+ esac
+
+ # While some portion of DIR does not yet exist...
+ while test ! -d "$my_directory_path"; do
+ # ...make a list in topmost first order. Use a colon delimited
+ # list incase some portion of path contains whitespace.
+ my_dir_list="$my_directory_path:$my_dir_list"
+
+ # If the last portion added has no slash in it, the list is done
+ case $my_directory_path in */*) ;; *) break ;; esac
+
+ # ...otherwise throw away the child directory and loop
+ my_directory_path=`$ECHO "$my_directory_path" | $SED -e "$dirname"`
+ done
+ my_dir_list=`$ECHO "$my_dir_list" | $SED 's,:*$,,'`
+
+ save_mkdir_p_IFS="$IFS"; IFS=':'
+ for my_dir in $my_dir_list; do
+ IFS="$save_mkdir_p_IFS"
+ # mkdir can fail with a `File exist' error if two processes
+ # try to create one of the directories concurrently. Don't
+ # stop in that case!
+ $MKDIR "$my_dir" 2>/dev/null || :
+ done
+ IFS="$save_mkdir_p_IFS"
+
+ # Bail out if we (or some other process) failed to create a directory.
+ test -d "$my_directory_path" || \
+ func_fatal_error "Failed to create \`$1'"
+ fi
+}
+
+
+# func_mktempdir [string]
+# Make a temporary directory that won't clash with other running
+# libtool processes, and avoids race conditions if possible. If
+# given, STRING is the basename for that directory.
+func_mktempdir ()
+{
+ my_template="${TMPDIR-/tmp}/${1-$progname}"
+
+ if test "$opt_dry_run" = ":"; then
+ # Return a directory name, but don't create it in dry-run mode
+ my_tmpdir="${my_template}-$$"
+ else
+
+ # If mktemp works, use that first and foremost
+ my_tmpdir=`mktemp -d "${my_template}-XXXXXXXX" 2>/dev/null`
+
+ if test ! -d "$my_tmpdir"; then
+ # Failing that, at least try and use $RANDOM to avoid a race
+ my_tmpdir="${my_template}-${RANDOM-0}$$"
+
+ save_mktempdir_umask=`umask`
+ umask 0077
+ $MKDIR "$my_tmpdir"
+ umask $save_mktempdir_umask
+ fi
+
+ # If we're not in dry-run mode, bomb out on failure
+ test -d "$my_tmpdir" || \
+ func_fatal_error "cannot create temporary directory \`$my_tmpdir'"
+ fi
+
+ $ECHO "$my_tmpdir"
+}
+
+
+# func_quote_for_eval arg
+# Aesthetically quote ARG to be evaled later.
+# This function returns two values: FUNC_QUOTE_FOR_EVAL_RESULT
+# is double-quoted, suitable for a subsequent eval, whereas
+# FUNC_QUOTE_FOR_EVAL_UNQUOTED_RESULT has merely all characters
+# which are still active within double quotes backslashified.
+func_quote_for_eval ()
+{
+ case $1 in
+ *[\\\`\"\$]*)
+ func_quote_for_eval_unquoted_result=`$ECHO "$1" | $SED "$sed_quote_subst"` ;;
+ *)
+ func_quote_for_eval_unquoted_result="$1" ;;
+ esac
+
+ case $func_quote_for_eval_unquoted_result in
+ # Double-quote args containing shell metacharacters to delay
+ # word splitting, command substitution and and variable
+ # expansion for a subsequent eval.
+ # Many Bourne shells cannot handle close brackets correctly
+ # in scan sets, so we specify it separately.
+ *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"")
+ func_quote_for_eval_result="\"$func_quote_for_eval_unquoted_result\""
+ ;;
+ *)
+ func_quote_for_eval_result="$func_quote_for_eval_unquoted_result"
+ esac
+}
+
+
+# func_quote_for_expand arg
+# Aesthetically quote ARG to be evaled later; same as above,
+# but do not quote variable references.
+func_quote_for_expand ()
+{
+ case $1 in
+ *[\\\`\"]*)
+ my_arg=`$ECHO "$1" | $SED \
+ -e "$double_quote_subst" -e "$sed_double_backslash"` ;;
+ *)
+ my_arg="$1" ;;
+ esac
+
+ case $my_arg in
+ # Double-quote args containing shell metacharacters to delay
+ # word splitting and command substitution for a subsequent eval.
+ # Many Bourne shells cannot handle close brackets correctly
+ # in scan sets, so we specify it separately.
+ *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"")
+ my_arg="\"$my_arg\""
+ ;;
+ esac
+
+ func_quote_for_expand_result="$my_arg"
+}
+
+
+# func_show_eval cmd [fail_exp]
+# Unless opt_silent is true, then output CMD. Then, if opt_dryrun is
+# not true, evaluate CMD. If the evaluation of CMD fails, and FAIL_EXP
+# is given, then evaluate it.
+func_show_eval ()
+{
+ my_cmd="$1"
+ my_fail_exp="${2-:}"
+
+ ${opt_silent-false} || {
+ func_quote_for_expand "$my_cmd"
+ eval "func_echo $func_quote_for_expand_result"
+ }
+
+ if ${opt_dry_run-false}; then :; else
+ eval "$my_cmd"
+ my_status=$?
+ if test "$my_status" -eq 0; then :; else
+ eval "(exit $my_status); $my_fail_exp"
+ fi
+ fi
+}
+
+
+# func_show_eval_locale cmd [fail_exp]
+# Unless opt_silent is true, then output CMD. Then, if opt_dryrun is
+# not true, evaluate CMD. If the evaluation of CMD fails, and FAIL_EXP
+# is given, then evaluate it. Use the saved locale for evaluation.
+func_show_eval_locale ()
+{
+ my_cmd="$1"
+ my_fail_exp="${2-:}"
+
+ ${opt_silent-false} || {
+ func_quote_for_expand "$my_cmd"
+ eval "func_echo $func_quote_for_expand_result"
+ }
+
+ if ${opt_dry_run-false}; then :; else
+ eval "$lt_user_locale
+ $my_cmd"
+ my_status=$?
+ eval "$lt_safe_locale"
+ if test "$my_status" -eq 0; then :; else
+ eval "(exit $my_status); $my_fail_exp"
+ fi
+ fi
+}
+
+# func_tr_sh
+# Turn $1 into a string suitable for a shell variable name.
+# Result is stored in $func_tr_sh_result. All characters
+# not in the set a-zA-Z0-9_ are replaced with '_'. Further,
+# if $1 begins with a digit, a '_' is prepended as well.
+func_tr_sh ()
+{
+ case $1 in
+ [0-9]* | *[!a-zA-Z0-9_]*)
+ func_tr_sh_result=`$ECHO "$1" | $SED 's/^\([0-9]\)/_\1/; s/[^a-zA-Z0-9_]/_/g'`
+ ;;
+ * )
+ func_tr_sh_result=$1
+ ;;
+ esac
+}
+
+
+# func_version
+# Echo version message to standard output and exit.
+func_version ()
+{
+ $opt_debug
+
+ $SED -n '/(C)/!b go
+ :more
+ /\./!{
+ N
+ s/\n# / /
+ b more
+ }
+ :go
+ /^# '$PROGRAM' (GNU /,/# warranty; / {
+ s/^# //
+ s/^# *$//
+ s/\((C)\)[ 0-9,-]*\( [1-9][0-9]*\)/\1\2/
+ p
+ }' < "$progpath"
+ exit $?
+}
+
+# func_usage
+# Echo short help message to standard output and exit.
+func_usage ()
+{
+ $opt_debug
+
+ $SED -n '/^# Usage:/,/^# *.*--help/ {
+ s/^# //
+ s/^# *$//
+ s/\$progname/'$progname'/
+ p
+ }' < "$progpath"
+ echo
+ $ECHO "run \`$progname --help | more' for full usage"
+ exit $?
+}
+
+# func_help [NOEXIT]
+# Echo long help message to standard output and exit,
+# unless 'noexit' is passed as argument.
+func_help ()
+{
+ $opt_debug
+
+ $SED -n '/^# Usage:/,/# Report bugs to/ {
+ :print
+ s/^# //
+ s/^# *$//
+ s*\$progname*'$progname'*
+ s*\$host*'"$host"'*
+ s*\$SHELL*'"$SHELL"'*
+ s*\$LTCC*'"$LTCC"'*
+ s*\$LTCFLAGS*'"$LTCFLAGS"'*
+ s*\$LD*'"$LD"'*
+ s/\$with_gnu_ld/'"$with_gnu_ld"'/
+ s/\$automake_version/'"`(automake --version) 2>/dev/null |$SED 1q`"'/
+ s/\$autoconf_version/'"`(autoconf --version) 2>/dev/null |$SED 1q`"'/
+ p
+ d
+ }
+ /^# .* home page:/b print
+ /^# General help using/b print
+ ' < "$progpath"
+ ret=$?
+ if test -z "$1"; then
+ exit $ret
+ fi
+}
+
+# func_missing_arg argname
+# Echo program name prefixed message to standard error and set global
+# exit_cmd.
+func_missing_arg ()
+{
+ $opt_debug
+
+ func_error "missing argument for $1."
+ exit_cmd=exit
+}
+
+
+# func_split_short_opt shortopt
+# Set func_split_short_opt_name and func_split_short_opt_arg shell
+# variables after splitting SHORTOPT after the 2nd character.
+func_split_short_opt ()
+{
+ my_sed_short_opt='1s/^\(..\).*$/\1/;q'
+ my_sed_short_rest='1s/^..\(.*\)$/\1/;q'
+
+ func_split_short_opt_name=`$ECHO "$1" | $SED "$my_sed_short_opt"`
+ func_split_short_opt_arg=`$ECHO "$1" | $SED "$my_sed_short_rest"`
+} # func_split_short_opt may be replaced by extended shell implementation
+
+
+# func_split_long_opt longopt
+# Set func_split_long_opt_name and func_split_long_opt_arg shell
+# variables after splitting LONGOPT at the `=' sign.
+func_split_long_opt ()
+{
+ my_sed_long_opt='1s/^\(--[^=]*\)=.*/\1/;q'
+ my_sed_long_arg='1s/^--[^=]*=//'
+
+ func_split_long_opt_name=`$ECHO "$1" | $SED "$my_sed_long_opt"`
+ func_split_long_opt_arg=`$ECHO "$1" | $SED "$my_sed_long_arg"`
+} # func_split_long_opt may be replaced by extended shell implementation
+
+exit_cmd=:
+
+
+
+
+
+magic="%%%MAGIC variable%%%"
+magic_exe="%%%MAGIC EXE variable%%%"
+
+# Global variables.
+nonopt=
+preserve_args=
+lo2o="s/\\.lo\$/.${objext}/"
+o2lo="s/\\.${objext}\$/.lo/"
+extracted_archives=
+extracted_serial=0
+
+# If this variable is set in any of the actions, the command in it
+# will be execed at the end. This prevents here-documents from being
+# left over by shells.
+exec_cmd=
+
+# func_append var value
+# Append VALUE to the end of shell variable VAR.
+func_append ()
+{
+ eval "${1}=\$${1}\${2}"
+} # func_append may be replaced by extended shell implementation
+
+# func_append_quoted var value
+# Quote VALUE and append to the end of shell variable VAR, separated
+# by a space.
+func_append_quoted ()
+{
+ func_quote_for_eval "${2}"
+ eval "${1}=\$${1}\\ \$func_quote_for_eval_result"
+} # func_append_quoted may be replaced by extended shell implementation
+
+
+# func_arith arithmetic-term...
+func_arith ()
+{
+ func_arith_result=`expr "${@}"`
+} # func_arith may be replaced by extended shell implementation
+
+
+# func_len string
+# STRING may not start with a hyphen.
+func_len ()
+{
+ func_len_result=`expr "${1}" : ".*" 2>/dev/null || echo $max_cmd_len`
+} # func_len may be replaced by extended shell implementation
+
+
+# func_lo2o object
+func_lo2o ()
+{
+ func_lo2o_result=`$ECHO "${1}" | $SED "$lo2o"`
+} # func_lo2o may be replaced by extended shell implementation
+
+
+# func_xform libobj-or-source
+func_xform ()
+{
+ func_xform_result=`$ECHO "${1}" | $SED 's/\.[^.]*$/.lo/'`
+} # func_xform may be replaced by extended shell implementation
+
+
+# func_fatal_configuration arg...
+# Echo program name prefixed message to standard error, followed by
+# a configuration failure hint, and exit.
+func_fatal_configuration ()
+{
+ func_error ${1+"$@"}
+ func_error "See the $PACKAGE documentation for more information."
+ func_fatal_error "Fatal configuration error."
+}
+
+
+# func_config
+# Display the configuration for all the tags in this script.
+func_config ()
+{
+ re_begincf='^# ### BEGIN LIBTOOL'
+ re_endcf='^# ### END LIBTOOL'
+
+ # Default configuration.
+ $SED "1,/$re_begincf CONFIG/d;/$re_endcf CONFIG/,\$d" < "$progpath"
+
+ # Now print the configurations for the tags.
+ for tagname in $taglist; do
+ $SED -n "/$re_begincf TAG CONFIG: $tagname\$/,/$re_endcf TAG CONFIG: $tagname\$/p" < "$progpath"
+ done
+
+ exit $?
+}
+
+# func_features
+# Display the features supported by this script.
+func_features ()
+{
+ echo "host: $host"
+ if test "$build_libtool_libs" = yes; then
+ echo "enable shared libraries"
+ else
+ echo "disable shared libraries"
+ fi
+ if test "$build_old_libs" = yes; then
+ echo "enable static libraries"
+ else
+ echo "disable static libraries"
+ fi
+
+ exit $?
+}
+
+# func_enable_tag tagname
+# Verify that TAGNAME is valid, and either flag an error and exit, or
+# enable the TAGNAME tag. We also add TAGNAME to the global $taglist
+# variable here.
+func_enable_tag ()
+{
+ # Global variable:
+ tagname="$1"
+
+ re_begincf="^# ### BEGIN LIBTOOL TAG CONFIG: $tagname\$"
+ re_endcf="^# ### END LIBTOOL TAG CONFIG: $tagname\$"
+ sed_extractcf="/$re_begincf/,/$re_endcf/p"
+
+ # Validate tagname.
+ case $tagname in
+ *[!-_A-Za-z0-9,/]*)
+ func_fatal_error "invalid tag name: $tagname"
+ ;;
+ esac
+
+ # Don't test for the "default" C tag, as we know it's
+ # there but not specially marked.
+ case $tagname in
+ CC) ;;
+ *)
+ if $GREP "$re_begincf" "$progpath" >/dev/null 2>&1; then
+ taglist="$taglist $tagname"
+
+ # Evaluate the configuration. Be careful to quote the path
+ # and the sed script, to avoid splitting on whitespace, but
+ # also don't use non-portable quotes within backquotes within
+ # quotes we have to do it in 2 steps:
+ extractedcf=`$SED -n -e "$sed_extractcf" < "$progpath"`
+ eval "$extractedcf"
+ else
+ func_error "ignoring unknown tag $tagname"
+ fi
+ ;;
+ esac
+}
+
+# func_check_version_match
+# Ensure that we are using m4 macros, and libtool script from the same
+# release of libtool.
+func_check_version_match ()
+{
+ if test "$package_revision" != "$macro_revision"; then
+ if test "$VERSION" != "$macro_version"; then
+ if test -z "$macro_version"; then
+ cat >&2 <<_LT_EOF
+$progname: Version mismatch error. This is $PACKAGE $VERSION, but the
+$progname: definition of this LT_INIT comes from an older release.
+$progname: You should recreate aclocal.m4 with macros from $PACKAGE $VERSION
+$progname: and run autoconf again.
+_LT_EOF
+ else
+ cat >&2 <<_LT_EOF
+$progname: Version mismatch error. This is $PACKAGE $VERSION, but the
+$progname: definition of this LT_INIT comes from $PACKAGE $macro_version.
+$progname: You should recreate aclocal.m4 with macros from $PACKAGE $VERSION
+$progname: and run autoconf again.
+_LT_EOF
+ fi
+ else
+ cat >&2 <<_LT_EOF
+$progname: Version mismatch error. This is $PACKAGE $VERSION, revision $package_revision,
+$progname: but the definition of this LT_INIT comes from revision $macro_revision.
+$progname: You should recreate aclocal.m4 with macros from revision $package_revision
+$progname: of $PACKAGE $VERSION and run autoconf again.
+_LT_EOF
+ fi
+
+ exit $EXIT_MISMATCH
+ fi
+}
+
+
+# Shorthand for --mode=foo, only valid as the first argument
+case $1 in
+clean|clea|cle|cl)
+ shift; set dummy --mode clean ${1+"$@"}; shift
+ ;;
+compile|compil|compi|comp|com|co|c)
+ shift; set dummy --mode compile ${1+"$@"}; shift
+ ;;
+execute|execut|execu|exec|exe|ex|e)
+ shift; set dummy --mode execute ${1+"$@"}; shift
+ ;;
+finish|finis|fini|fin|fi|f)
+ shift; set dummy --mode finish ${1+"$@"}; shift
+ ;;
+install|instal|insta|inst|ins|in|i)
+ shift; set dummy --mode install ${1+"$@"}; shift
+ ;;
+link|lin|li|l)
+ shift; set dummy --mode link ${1+"$@"}; shift
+ ;;
+uninstall|uninstal|uninsta|uninst|unins|unin|uni|un|u)
+ shift; set dummy --mode uninstall ${1+"$@"}; shift
+ ;;
+esac
+
+
+
+# Option defaults:
+opt_debug=:
+opt_dry_run=false
+opt_config=false
+opt_preserve_dup_deps=false
+opt_features=false
+opt_finish=false
+opt_help=false
+opt_help_all=false
+opt_silent=:
+opt_verbose=:
+opt_silent=false
+opt_verbose=false
+
+
+# Parse options once, thoroughly. This comes as soon as possible in the
+# script to make things like `--version' happen as quickly as we can.
+{
+ # this just eases exit handling
+ while test $# -gt 0; do
+ opt="$1"
+ shift
+ case $opt in
+ --debug|-x) opt_debug='set -x'
+ func_echo "enabling shell trace mode"
+ $opt_debug
+ ;;
+ --dry-run|--dryrun|-n)
+ opt_dry_run=:
+ ;;
+ --config)
+ opt_config=:
+func_config
+ ;;
+ --dlopen|-dlopen)
+ optarg="$1"
+ opt_dlopen="${opt_dlopen+$opt_dlopen
+}$optarg"
+ shift
+ ;;
+ --preserve-dup-deps)
+ opt_preserve_dup_deps=:
+ ;;
+ --features)
+ opt_features=:
+func_features
+ ;;
+ --finish)
+ opt_finish=:
+set dummy --mode finish ${1+"$@"}; shift
+ ;;
+ --help)
+ opt_help=:
+ ;;
+ --help-all)
+ opt_help_all=:
+opt_help=': help-all'
+ ;;
+ --mode)
+ test $# = 0 && func_missing_arg $opt && break
+ optarg="$1"
+ opt_mode="$optarg"
+case $optarg in
+ # Valid mode arguments:
+ clean|compile|execute|finish|install|link|relink|uninstall) ;;
+
+ # Catch anything else as an error
+ *) func_error "invalid argument for $opt"
+ exit_cmd=exit
+ break
+ ;;
+esac
+ shift
+ ;;
+ --no-silent|--no-quiet)
+ opt_silent=false
+func_append preserve_args " $opt"
+ ;;
+ --no-verbose)
+ opt_verbose=false
+func_append preserve_args " $opt"
+ ;;
+ --silent|--quiet)
+ opt_silent=:
+func_append preserve_args " $opt"
+ opt_verbose=false
+ ;;
+ --verbose|-v)
+ opt_verbose=:
+func_append preserve_args " $opt"
+opt_silent=false
+ ;;
+ --tag)
+ test $# = 0 && func_missing_arg $opt && break
+ optarg="$1"
+ opt_tag="$optarg"
+func_append preserve_args " $opt $optarg"
+func_enable_tag "$optarg"
+ shift
+ ;;
+
+ -\?|-h) func_usage ;;
+ --help) func_help ;;
+ --version) func_version ;;
+
+ # Separate optargs to long options:
+ --*=*)
+ func_split_long_opt "$opt"
+ set dummy "$func_split_long_opt_name" "$func_split_long_opt_arg" ${1+"$@"}
+ shift
+ ;;
+
+ # Separate non-argument short options:
+ -\?*|-h*|-n*|-v*)
+ func_split_short_opt "$opt"
+ set dummy "$func_split_short_opt_name" "-$func_split_short_opt_arg" ${1+"$@"}
+ shift
+ ;;
+
+ --) break ;;
+ -*) func_fatal_help "unrecognized option \`$opt'" ;;
+ *) set dummy "$opt" ${1+"$@"}; shift; break ;;
+ esac
+ done
+
+ # Validate options:
+
+ # save first non-option argument
+ if test "$#" -gt 0; then
+ nonopt="$opt"
+ shift
+ fi
+
+ # preserve --debug
+ test "$opt_debug" = : || func_append preserve_args " --debug"
+
+ case $host in
+ *cygwin* | *mingw* | *pw32* | *cegcc*)
+ # don't eliminate duplications in $postdeps and $predeps
+ opt_duplicate_compiler_generated_deps=:
+ ;;
+ *)
+ opt_duplicate_compiler_generated_deps=$opt_preserve_dup_deps
+ ;;
+ esac
+
+ $opt_help || {
+ # Sanity checks first:
+ func_check_version_match
+
+ if test "$build_libtool_libs" != yes && test "$build_old_libs" != yes; then
+ func_fatal_configuration "not configured to build any kind of library"
+ fi
+
+ # Darwin sucks
+ eval std_shrext=\"$shrext_cmds\"
+
+ # Only execute mode is allowed to have -dlopen flags.
+ if test -n "$opt_dlopen" && test "$opt_mode" != execute; then
+ func_error "unrecognized option \`-dlopen'"
+ $ECHO "$help" 1>&2
+ exit $EXIT_FAILURE
+ fi
+
+ # Change the help message to a mode-specific one.
+ generic_help="$help"
+ help="Try \`$progname --help --mode=$opt_mode' for more information."
+ }
+
+
+ # Bail if the options were screwed
+ $exit_cmd $EXIT_FAILURE
+}
+
+
+
+
+## ----------- ##
+## Main. ##
+## ----------- ##
+
+# func_lalib_p file
+# True iff FILE is a libtool `.la' library or `.lo' object file.
+# This function is only a basic sanity check; it will hardly flush out
+# determined imposters.
+func_lalib_p ()
+{
+ test -f "$1" &&
+ $SED -e 4q "$1" 2>/dev/null \
+ | $GREP "^# Generated by .*$PACKAGE" > /dev/null 2>&1
+}
+
+# func_lalib_unsafe_p file
+# True iff FILE is a libtool `.la' library or `.lo' object file.
+# This function implements the same check as func_lalib_p without
+# resorting to external programs. To this end, it redirects stdin and
+# closes it afterwards, without saving the original file descriptor.
+# As a safety measure, use it only where a negative result would be
+# fatal anyway. Works if `file' does not exist.
+func_lalib_unsafe_p ()
+{
+ lalib_p=no
+ if test -f "$1" && test -r "$1" && exec 5<&0 <"$1"; then
+ for lalib_p_l in 1 2 3 4
+ do
+ read lalib_p_line
+ case "$lalib_p_line" in
+ \#\ Generated\ by\ *$PACKAGE* ) lalib_p=yes; break;;
+ esac
+ done
+ exec 0<&5 5<&-
+ fi
+ test "$lalib_p" = yes
+}
+
+# func_ltwrapper_script_p file
+# True iff FILE is a libtool wrapper script
+# This function is only a basic sanity check; it will hardly flush out
+# determined imposters.
+func_ltwrapper_script_p ()
+{
+ func_lalib_p "$1"
+}
+
+# func_ltwrapper_executable_p file
+# True iff FILE is a libtool wrapper executable
+# This function is only a basic sanity check; it will hardly flush out
+# determined imposters.
+func_ltwrapper_executable_p ()
+{
+ func_ltwrapper_exec_suffix=
+ case $1 in
+ *.exe) ;;
+ *) func_ltwrapper_exec_suffix=.exe ;;
+ esac
+ $GREP "$magic_exe" "$1$func_ltwrapper_exec_suffix" >/dev/null 2>&1
+}
+
+# func_ltwrapper_scriptname file
+# Assumes file is an ltwrapper_executable
+# uses $file to determine the appropriate filename for a
+# temporary ltwrapper_script.
+func_ltwrapper_scriptname ()
+{
+ func_dirname_and_basename "$1" "" "."
+ func_stripname '' '.exe' "$func_basename_result"
+ func_ltwrapper_scriptname_result="$func_dirname_result/$objdir/${func_stripname_result}_ltshwrapper"
+}
+
+# func_ltwrapper_p file
+# True iff FILE is a libtool wrapper script or wrapper executable
+# This function is only a basic sanity check; it will hardly flush out
+# determined imposters.
+func_ltwrapper_p ()
+{
+ func_ltwrapper_script_p "$1" || func_ltwrapper_executable_p "$1"
+}
+
+
+# func_execute_cmds commands fail_cmd
+# Execute tilde-delimited COMMANDS.
+# If FAIL_CMD is given, eval that upon failure.
+# FAIL_CMD may read-access the current command in variable CMD!
+func_execute_cmds ()
+{
+ $opt_debug
+ save_ifs=$IFS; IFS='~'
+ for cmd in $1; do
+ IFS=$save_ifs
+ eval cmd=\"$cmd\"
+ func_show_eval "$cmd" "${2-:}"
+ done
+ IFS=$save_ifs
+}
+
+
+# func_source file
+# Source FILE, adding directory component if necessary.
+# Note that it is not necessary on cygwin/mingw to append a dot to
+# FILE even if both FILE and FILE.exe exist: automatic-append-.exe
+# behavior happens only for exec(3), not for open(2)! Also, sourcing
+# `FILE.' does not work on cygwin managed mounts.
+func_source ()
+{
+ $opt_debug
+ case $1 in
+ */* | *\\*) . "$1" ;;
+ *) . "./$1" ;;
+ esac
+}
+
+
+# func_resolve_sysroot PATH
+# Replace a leading = in PATH with a sysroot. Store the result into
+# func_resolve_sysroot_result
+func_resolve_sysroot ()
+{
+ func_resolve_sysroot_result=$1
+ case $func_resolve_sysroot_result in
+ =*)
+ func_stripname '=' '' "$func_resolve_sysroot_result"
+ func_resolve_sysroot_result=$lt_sysroot$func_stripname_result
+ ;;
+ esac
+}
+
+# func_replace_sysroot PATH
+# If PATH begins with the sysroot, replace it with = and
+# store the result into func_replace_sysroot_result.
+func_replace_sysroot ()
+{
+ case "$lt_sysroot:$1" in
+ ?*:"$lt_sysroot"*)
+ func_stripname "$lt_sysroot" '' "$1"
+ func_replace_sysroot_result="=$func_stripname_result"
+ ;;
+ *)
+ # Including no sysroot.
+ func_replace_sysroot_result=$1
+ ;;
+ esac
+}
+
+# func_infer_tag arg
+# Infer tagged configuration to use if any are available and
+# if one wasn't chosen via the "--tag" command line option.
+# Only attempt this if the compiler in the base compile
+# command doesn't match the default compiler.
+# arg is usually of the form 'gcc ...'
+func_infer_tag ()
+{
+ $opt_debug
+ if test -n "$available_tags" && test -z "$tagname"; then
+ CC_quoted=
+ for arg in $CC; do
+ func_append_quoted CC_quoted "$arg"
+ done
+ CC_expanded=`func_echo_all $CC`
+ CC_quoted_expanded=`func_echo_all $CC_quoted`
+ case $@ in
+ # Blanks in the command may have been stripped by the calling shell,
+ # but not from the CC environment variable when configure was run.
+ " $CC "* | "$CC "* | " $CC_expanded "* | "$CC_expanded "* | \
+ " $CC_quoted"* | "$CC_quoted "* | " $CC_quoted_expanded "* | "$CC_quoted_expanded "*) ;;
+ # Blanks at the start of $base_compile will cause this to fail
+ # if we don't check for them as well.
+ *)
+ for z in $available_tags; do
+ if $GREP "^# ### BEGIN LIBTOOL TAG CONFIG: $z$" < "$progpath" > /dev/null; then
+ # Evaluate the configuration.
+ eval "`${SED} -n -e '/^# ### BEGIN LIBTOOL TAG CONFIG: '$z'$/,/^# ### END LIBTOOL TAG CONFIG: '$z'$/p' < $progpath`"
+ CC_quoted=
+ for arg in $CC; do
+ # Double-quote args containing other shell metacharacters.
+ func_append_quoted CC_quoted "$arg"
+ done
+ CC_expanded=`func_echo_all $CC`
+ CC_quoted_expanded=`func_echo_all $CC_quoted`
+ case "$@ " in
+ " $CC "* | "$CC "* | " $CC_expanded "* | "$CC_expanded "* | \
+ " $CC_quoted"* | "$CC_quoted "* | " $CC_quoted_expanded "* | "$CC_quoted_expanded "*)
+ # The compiler in the base compile command matches
+ # the one in the tagged configuration.
+ # Assume this is the tagged configuration we want.
+ tagname=$z
+ break
+ ;;
+ esac
+ fi
+ done
+ # If $tagname still isn't set, then no tagged configuration
+ # was found and let the user know that the "--tag" command
+ # line option must be used.
+ if test -z "$tagname"; then
+ func_echo "unable to infer tagged configuration"
+ func_fatal_error "specify a tag with \`--tag'"
+# else
+# func_verbose "using $tagname tagged configuration"
+ fi
+ ;;
+ esac
+ fi
+}
+
+
+
+# func_write_libtool_object output_name pic_name nonpic_name
+# Create a libtool object file (analogous to a ".la" file),
+# but don't create it if we're doing a dry run.
+func_write_libtool_object ()
+{
+ write_libobj=${1}
+ if test "$build_libtool_libs" = yes; then
+ write_lobj=\'${2}\'
+ else
+ write_lobj=none
+ fi
+
+ if test "$build_old_libs" = yes; then
+ write_oldobj=\'${3}\'
+ else
+ write_oldobj=none
+ fi
+
+ $opt_dry_run || {
+ cat >${write_libobj}T <<EOF
+# $write_libobj - a libtool object file
+# Generated by $PROGRAM (GNU $PACKAGE$TIMESTAMP) $VERSION
+#
+# Please DO NOT delete this file!
+# It is necessary for linking the library.
+
+# Name of the PIC object.
+pic_object=$write_lobj
+
+# Name of the non-PIC object
+non_pic_object=$write_oldobj
+
+EOF
+ $MV "${write_libobj}T" "${write_libobj}"
+ }
+}
+
+
+##################################################
+# FILE NAME AND PATH CONVERSION HELPER FUNCTIONS #
+##################################################
+
+# func_convert_core_file_wine_to_w32 ARG
+# Helper function used by file name conversion functions when $build is *nix,
+# and $host is mingw, cygwin, or some other w32 environment. Relies on a
+# correctly configured wine environment available, with the winepath program
+# in $build's $PATH.
+#
+# ARG is the $build file name to be converted to w32 format.
+# Result is available in $func_convert_core_file_wine_to_w32_result, and will
+# be empty on error (or when ARG is empty)
+func_convert_core_file_wine_to_w32 ()
+{
+ $opt_debug
+ func_convert_core_file_wine_to_w32_result="$1"
+ if test -n "$1"; then
+ # Unfortunately, winepath does not exit with a non-zero error code, so we
+ # are forced to check the contents of stdout. On the other hand, if the
+ # command is not found, the shell will set an exit code of 127 and print
+ # *an error message* to stdout. So we must check for both error code of
+ # zero AND non-empty stdout, which explains the odd construction:
+ func_convert_core_file_wine_to_w32_tmp=`winepath -w "$1" 2>/dev/null`
+ if test "$?" -eq 0 && test -n "${func_convert_core_file_wine_to_w32_tmp}"; then
+ func_convert_core_file_wine_to_w32_result=`$ECHO "$func_convert_core_file_wine_to_w32_tmp" |
+ $SED -e "$lt_sed_naive_backslashify"`
+ else
+ func_convert_core_file_wine_to_w32_result=
+ fi
+ fi
+}
+# end: func_convert_core_file_wine_to_w32
+
+
+# func_convert_core_path_wine_to_w32 ARG
+# Helper function used by path conversion functions when $build is *nix, and
+# $host is mingw, cygwin, or some other w32 environment. Relies on a correctly
+# configured wine environment available, with the winepath program in $build's
+# $PATH. Assumes ARG has no leading or trailing path separator characters.
+#
+# ARG is path to be converted from $build format to win32.
+# Result is available in $func_convert_core_path_wine_to_w32_result.
+# Unconvertible file (directory) names in ARG are skipped; if no directory names
+# are convertible, then the result may be empty.
+func_convert_core_path_wine_to_w32 ()
+{
+ $opt_debug
+ # unfortunately, winepath doesn't convert paths, only file names
+ func_convert_core_path_wine_to_w32_result=""
+ if test -n "$1"; then
+ oldIFS=$IFS
+ IFS=:
+ for func_convert_core_path_wine_to_w32_f in $1; do
+ IFS=$oldIFS
+ func_convert_core_file_wine_to_w32 "$func_convert_core_path_wine_to_w32_f"
+ if test -n "$func_convert_core_file_wine_to_w32_result" ; then
+ if test -z "$func_convert_core_path_wine_to_w32_result"; then
+ func_convert_core_path_wine_to_w32_result="$func_convert_core_file_wine_to_w32_result"
+ else
+ func_append func_convert_core_path_wine_to_w32_result ";$func_convert_core_file_wine_to_w32_result"
+ fi
+ fi
+ done
+ IFS=$oldIFS
+ fi
+}
+# end: func_convert_core_path_wine_to_w32
+
+
+# func_cygpath ARGS...
+# Wrapper around calling the cygpath program via LT_CYGPATH. This is used when
+# when (1) $build is *nix and Cygwin is hosted via a wine environment; or (2)
+# $build is MSYS and $host is Cygwin, or (3) $build is Cygwin. In case (1) or
+# (2), returns the Cygwin file name or path in func_cygpath_result (input
+# file name or path is assumed to be in w32 format, as previously converted
+# from $build's *nix or MSYS format). In case (3), returns the w32 file name
+# or path in func_cygpath_result (input file name or path is assumed to be in
+# Cygwin format). Returns an empty string on error.
+#
+# ARGS are passed to cygpath, with the last one being the file name or path to
+# be converted.
+#
+# Specify the absolute *nix (or w32) name to cygpath in the LT_CYGPATH
+# environment variable; do not put it in $PATH.
+func_cygpath ()
+{
+ $opt_debug
+ if test -n "$LT_CYGPATH" && test -f "$LT_CYGPATH"; then
+ func_cygpath_result=`$LT_CYGPATH "$@" 2>/dev/null`
+ if test "$?" -ne 0; then
+ # on failure, ensure result is empty
+ func_cygpath_result=
+ fi
+ else
+ func_cygpath_result=
+ func_error "LT_CYGPATH is empty or specifies non-existent file: \`$LT_CYGPATH'"
+ fi
+}
+#end: func_cygpath
+
+
+# func_convert_core_msys_to_w32 ARG
+# Convert file name or path ARG from MSYS format to w32 format. Return
+# result in func_convert_core_msys_to_w32_result.
+func_convert_core_msys_to_w32 ()
+{
+ $opt_debug
+ # awkward: cmd appends spaces to result
+ func_convert_core_msys_to_w32_result=`( cmd //c echo "$1" ) 2>/dev/null |
+ $SED -e 's/[ ]*$//' -e "$lt_sed_naive_backslashify"`
+}
+#end: func_convert_core_msys_to_w32
+
+
+# func_convert_file_check ARG1 ARG2
+# Verify that ARG1 (a file name in $build format) was converted to $host
+# format in ARG2. Otherwise, emit an error message, but continue (resetting
+# func_to_host_file_result to ARG1).
+func_convert_file_check ()
+{
+ $opt_debug
+ if test -z "$2" && test -n "$1" ; then
+ func_error "Could not determine host file name corresponding to"
+ func_error " \`$1'"
+ func_error "Continuing, but uninstalled executables may not work."
+ # Fallback:
+ func_to_host_file_result="$1"
+ fi
+}
+# end func_convert_file_check
+
+
+# func_convert_path_check FROM_PATHSEP TO_PATHSEP FROM_PATH TO_PATH
+# Verify that FROM_PATH (a path in $build format) was converted to $host
+# format in TO_PATH. Otherwise, emit an error message, but continue, resetting
+# func_to_host_file_result to a simplistic fallback value (see below).
+func_convert_path_check ()
+{
+ $opt_debug
+ if test -z "$4" && test -n "$3"; then
+ func_error "Could not determine the host path corresponding to"
+ func_error " \`$3'"
+ func_error "Continuing, but uninstalled executables may not work."
+ # Fallback. This is a deliberately simplistic "conversion" and
+ # should not be "improved". See libtool.info.
+ if test "x$1" != "x$2"; then
+ lt_replace_pathsep_chars="s|$1|$2|g"
+ func_to_host_path_result=`echo "$3" |
+ $SED -e "$lt_replace_pathsep_chars"`
+ else
+ func_to_host_path_result="$3"
+ fi
+ fi
+}
+# end func_convert_path_check
+
+
+# func_convert_path_front_back_pathsep FRONTPAT BACKPAT REPL ORIG
+# Modifies func_to_host_path_result by prepending REPL if ORIG matches FRONTPAT
+# and appending REPL if ORIG matches BACKPAT.
+func_convert_path_front_back_pathsep ()
+{
+ $opt_debug
+ case $4 in
+ $1 ) func_to_host_path_result="$3$func_to_host_path_result"
+ ;;
+ esac
+ case $4 in
+ $2 ) func_append func_to_host_path_result "$3"
+ ;;
+ esac
+}
+# end func_convert_path_front_back_pathsep
+
+
+##################################################
+# $build to $host FILE NAME CONVERSION FUNCTIONS #
+##################################################
+# invoked via `$to_host_file_cmd ARG'
+#
+# In each case, ARG is the path to be converted from $build to $host format.
+# Result will be available in $func_to_host_file_result.
+
+
+# func_to_host_file ARG
+# Converts the file name ARG from $build format to $host format. Return result
+# in func_to_host_file_result.
+func_to_host_file ()
+{
+ $opt_debug
+ $to_host_file_cmd "$1"
+}
+# end func_to_host_file
+
+
+# func_to_tool_file ARG LAZY
+# converts the file name ARG from $build format to toolchain format. Return
+# result in func_to_tool_file_result. If the conversion in use is listed
+# in (the comma separated) LAZY, no conversion takes place.
+func_to_tool_file ()
+{
+ $opt_debug
+ case ,$2, in
+ *,"$to_tool_file_cmd",*)
+ func_to_tool_file_result=$1
+ ;;
+ *)
+ $to_tool_file_cmd "$1"
+ func_to_tool_file_result=$func_to_host_file_result
+ ;;
+ esac
+}
+# end func_to_tool_file
+
+
+# func_convert_file_noop ARG
+# Copy ARG to func_to_host_file_result.
+func_convert_file_noop ()
+{
+ func_to_host_file_result="$1"
+}
+# end func_convert_file_noop
+
+
+# func_convert_file_msys_to_w32 ARG
+# Convert file name ARG from (mingw) MSYS to (mingw) w32 format; automatic
+# conversion to w32 is not available inside the cwrapper. Returns result in
+# func_to_host_file_result.
+func_convert_file_msys_to_w32 ()
+{
+ $opt_debug
+ func_to_host_file_result="$1"
+ if test -n "$1"; then
+ func_convert_core_msys_to_w32 "$1"
+ func_to_host_file_result="$func_convert_core_msys_to_w32_result"
+ fi
+ func_convert_file_check "$1" "$func_to_host_file_result"
+}
+# end func_convert_file_msys_to_w32
+
+
+# func_convert_file_cygwin_to_w32 ARG
+# Convert file name ARG from Cygwin to w32 format. Returns result in
+# func_to_host_file_result.
+func_convert_file_cygwin_to_w32 ()
+{
+ $opt_debug
+ func_to_host_file_result="$1"
+ if test -n "$1"; then
+ # because $build is cygwin, we call "the" cygpath in $PATH; no need to use
+ # LT_CYGPATH in this case.
+ func_to_host_file_result=`cygpath -m "$1"`
+ fi
+ func_convert_file_check "$1" "$func_to_host_file_result"
+}
+# end func_convert_file_cygwin_to_w32
+
+
+# func_convert_file_nix_to_w32 ARG
+# Convert file name ARG from *nix to w32 format. Requires a wine environment
+# and a working winepath. Returns result in func_to_host_file_result.
+func_convert_file_nix_to_w32 ()
+{
+ $opt_debug
+ func_to_host_file_result="$1"
+ if test -n "$1"; then
+ func_convert_core_file_wine_to_w32 "$1"
+ func_to_host_file_result="$func_convert_core_file_wine_to_w32_result"
+ fi
+ func_convert_file_check "$1" "$func_to_host_file_result"
+}
+# end func_convert_file_nix_to_w32
+
+
+# func_convert_file_msys_to_cygwin ARG
+# Convert file name ARG from MSYS to Cygwin format. Requires LT_CYGPATH set.
+# Returns result in func_to_host_file_result.
+func_convert_file_msys_to_cygwin ()
+{
+ $opt_debug
+ func_to_host_file_result="$1"
+ if test -n "$1"; then
+ func_convert_core_msys_to_w32 "$1"
+ func_cygpath -u "$func_convert_core_msys_to_w32_result"
+ func_to_host_file_result="$func_cygpath_result"
+ fi
+ func_convert_file_check "$1" "$func_to_host_file_result"
+}
+# end func_convert_file_msys_to_cygwin
+
+
+# func_convert_file_nix_to_cygwin ARG
+# Convert file name ARG from *nix to Cygwin format. Requires Cygwin installed
+# in a wine environment, working winepath, and LT_CYGPATH set. Returns result
+# in func_to_host_file_result.
+func_convert_file_nix_to_cygwin ()
+{
+ $opt_debug
+ func_to_host_file_result="$1"
+ if test -n "$1"; then
+ # convert from *nix to w32, then use cygpath to convert from w32 to cygwin.
+ func_convert_core_file_wine_to_w32 "$1"
+ func_cygpath -u "$func_convert_core_file_wine_to_w32_result"
+ func_to_host_file_result="$func_cygpath_result"
+ fi
+ func_convert_file_check "$1" "$func_to_host_file_result"
+}
+# end func_convert_file_nix_to_cygwin
+
+
+#############################################
+# $build to $host PATH CONVERSION FUNCTIONS #
+#############################################
+# invoked via `$to_host_path_cmd ARG'
+#
+# In each case, ARG is the path to be converted from $build to $host format.
+# The result will be available in $func_to_host_path_result.
+#
+# Path separators are also converted from $build format to $host format. If
+# ARG begins or ends with a path separator character, it is preserved (but
+# converted to $host format) on output.
+#
+# All path conversion functions are named using the following convention:
+# file name conversion function : func_convert_file_X_to_Y ()
+# path conversion function : func_convert_path_X_to_Y ()
+# where, for any given $build/$host combination the 'X_to_Y' value is the
+# same. If conversion functions are added for new $build/$host combinations,
+# the two new functions must follow this pattern, or func_init_to_host_path_cmd
+# will break.
+
+
+# func_init_to_host_path_cmd
+# Ensures that function "pointer" variable $to_host_path_cmd is set to the
+# appropriate value, based on the value of $to_host_file_cmd.
+to_host_path_cmd=
+func_init_to_host_path_cmd ()
+{
+ $opt_debug
+ if test -z "$to_host_path_cmd"; then
+ func_stripname 'func_convert_file_' '' "$to_host_file_cmd"
+ to_host_path_cmd="func_convert_path_${func_stripname_result}"
+ fi
+}
+
+
+# func_to_host_path ARG
+# Converts the path ARG from $build format to $host format. Return result
+# in func_to_host_path_result.
+func_to_host_path ()
+{
+ $opt_debug
+ func_init_to_host_path_cmd
+ $to_host_path_cmd "$1"
+}
+# end func_to_host_path
+
+
+# func_convert_path_noop ARG
+# Copy ARG to func_to_host_path_result.
+func_convert_path_noop ()
+{
+ func_to_host_path_result="$1"
+}
+# end func_convert_path_noop
+
+
+# func_convert_path_msys_to_w32 ARG
+# Convert path ARG from (mingw) MSYS to (mingw) w32 format; automatic
+# conversion to w32 is not available inside the cwrapper. Returns result in
+# func_to_host_path_result.
+func_convert_path_msys_to_w32 ()
+{
+ $opt_debug
+ func_to_host_path_result="$1"
+ if test -n "$1"; then
+ # Remove leading and trailing path separator characters from ARG. MSYS
+ # behavior is inconsistent here; cygpath turns them into '.;' and ';.';
+ # and winepath ignores them completely.
+ func_stripname : : "$1"
+ func_to_host_path_tmp1=$func_stripname_result
+ func_convert_core_msys_to_w32 "$func_to_host_path_tmp1"
+ func_to_host_path_result="$func_convert_core_msys_to_w32_result"
+ func_convert_path_check : ";" \
+ "$func_to_host_path_tmp1" "$func_to_host_path_result"
+ func_convert_path_front_back_pathsep ":*" "*:" ";" "$1"
+ fi
+}
+# end func_convert_path_msys_to_w32
+
+
+# func_convert_path_cygwin_to_w32 ARG
+# Convert path ARG from Cygwin to w32 format. Returns result in
+# func_to_host_file_result.
+func_convert_path_cygwin_to_w32 ()
+{
+ $opt_debug
+ func_to_host_path_result="$1"
+ if test -n "$1"; then
+ # See func_convert_path_msys_to_w32:
+ func_stripname : : "$1"
+ func_to_host_path_tmp1=$func_stripname_result
+ func_to_host_path_result=`cygpath -m -p "$func_to_host_path_tmp1"`
+ func_convert_path_check : ";" \
+ "$func_to_host_path_tmp1" "$func_to_host_path_result"
+ func_convert_path_front_back_pathsep ":*" "*:" ";" "$1"
+ fi
+}
+# end func_convert_path_cygwin_to_w32
+
+
+# func_convert_path_nix_to_w32 ARG
+# Convert path ARG from *nix to w32 format. Requires a wine environment and
+# a working winepath. Returns result in func_to_host_file_result.
+func_convert_path_nix_to_w32 ()
+{
+ $opt_debug
+ func_to_host_path_result="$1"
+ if test -n "$1"; then
+ # See func_convert_path_msys_to_w32:
+ func_stripname : : "$1"
+ func_to_host_path_tmp1=$func_stripname_result
+ func_convert_core_path_wine_to_w32 "$func_to_host_path_tmp1"
+ func_to_host_path_result="$func_convert_core_path_wine_to_w32_result"
+ func_convert_path_check : ";" \
+ "$func_to_host_path_tmp1" "$func_to_host_path_result"
+ func_convert_path_front_back_pathsep ":*" "*:" ";" "$1"
+ fi
+}
+# end func_convert_path_nix_to_w32
+
+
+# func_convert_path_msys_to_cygwin ARG
+# Convert path ARG from MSYS to Cygwin format. Requires LT_CYGPATH set.
+# Returns result in func_to_host_file_result.
+func_convert_path_msys_to_cygwin ()
+{
+ $opt_debug
+ func_to_host_path_result="$1"
+ if test -n "$1"; then
+ # See func_convert_path_msys_to_w32:
+ func_stripname : : "$1"
+ func_to_host_path_tmp1=$func_stripname_result
+ func_convert_core_msys_to_w32 "$func_to_host_path_tmp1"
+ func_cygpath -u -p "$func_convert_core_msys_to_w32_result"
+ func_to_host_path_result="$func_cygpath_result"
+ func_convert_path_check : : \
+ "$func_to_host_path_tmp1" "$func_to_host_path_result"
+ func_convert_path_front_back_pathsep ":*" "*:" : "$1"
+ fi
+}
+# end func_convert_path_msys_to_cygwin
+
+
+# func_convert_path_nix_to_cygwin ARG
+# Convert path ARG from *nix to Cygwin format. Requires Cygwin installed in a
+# a wine environment, working winepath, and LT_CYGPATH set. Returns result in
+# func_to_host_file_result.
+func_convert_path_nix_to_cygwin ()
+{
+ $opt_debug
+ func_to_host_path_result="$1"
+ if test -n "$1"; then
+ # Remove leading and trailing path separator characters from
+ # ARG. msys behavior is inconsistent here, cygpath turns them
+ # into '.;' and ';.', and winepath ignores them completely.
+ func_stripname : : "$1"
+ func_to_host_path_tmp1=$func_stripname_result
+ func_convert_core_path_wine_to_w32 "$func_to_host_path_tmp1"
+ func_cygpath -u -p "$func_convert_core_path_wine_to_w32_result"
+ func_to_host_path_result="$func_cygpath_result"
+ func_convert_path_check : : \
+ "$func_to_host_path_tmp1" "$func_to_host_path_result"
+ func_convert_path_front_back_pathsep ":*" "*:" : "$1"
+ fi
+}
+# end func_convert_path_nix_to_cygwin
+
+
+# func_mode_compile arg...
+func_mode_compile ()
+{
+ $opt_debug
+ # Get the compilation command and the source file.
+ base_compile=
+ srcfile="$nonopt" # always keep a non-empty value in "srcfile"
+ suppress_opt=yes
+ suppress_output=
+ arg_mode=normal
+ libobj=
+ later=
+ pie_flag=
+
+ for arg
+ do
+ case $arg_mode in
+ arg )
+ # do not "continue". Instead, add this to base_compile
+ lastarg="$arg"
+ arg_mode=normal
+ ;;
+
+ target )
+ libobj="$arg"
+ arg_mode=normal
+ continue
+ ;;
+
+ normal )
+ # Accept any command-line options.
+ case $arg in
+ -o)
+ test -n "$libobj" && \
+ func_fatal_error "you cannot specify \`-o' more than once"
+ arg_mode=target
+ continue
+ ;;
+
+ -pie | -fpie | -fPIE)
+ func_append pie_flag " $arg"
+ continue
+ ;;
+
+ -shared | -static | -prefer-pic | -prefer-non-pic)
+ func_append later " $arg"
+ continue
+ ;;
+
+ -no-suppress)
+ suppress_opt=no
+ continue
+ ;;
+
+ -Xcompiler)
+ arg_mode=arg # the next one goes into the "base_compile" arg list
+ continue # The current "srcfile" will either be retained or
+ ;; # replaced later. I would guess that would be a bug.
+
+ -Wc,*)
+ func_stripname '-Wc,' '' "$arg"
+ args=$func_stripname_result
+ lastarg=
+ save_ifs="$IFS"; IFS=','
+ for arg in $args; do
+ IFS="$save_ifs"
+ func_append_quoted lastarg "$arg"
+ done
+ IFS="$save_ifs"
+ func_stripname ' ' '' "$lastarg"
+ lastarg=$func_stripname_result
+
+ # Add the arguments to base_compile.
+ func_append base_compile " $lastarg"
+ continue
+ ;;
+
+ *)
+ # Accept the current argument as the source file.
+ # The previous "srcfile" becomes the current argument.
+ #
+ lastarg="$srcfile"
+ srcfile="$arg"
+ ;;
+ esac # case $arg
+ ;;
+ esac # case $arg_mode
+
+ # Aesthetically quote the previous argument.
+ func_append_quoted base_compile "$lastarg"
+ done # for arg
+
+ case $arg_mode in
+ arg)
+ func_fatal_error "you must specify an argument for -Xcompile"
+ ;;
+ target)
+ func_fatal_error "you must specify a target with \`-o'"
+ ;;
+ *)
+ # Get the name of the library object.
+ test -z "$libobj" && {
+ func_basename "$srcfile"
+ libobj="$func_basename_result"
+ }
+ ;;
+ esac
+
+ # Recognize several different file suffixes.
+ # If the user specifies -o file.o, it is replaced with file.lo
+ case $libobj in
+ *.[cCFSifmso] | \
+ *.ada | *.adb | *.ads | *.asm | \
+ *.c++ | *.cc | *.ii | *.class | *.cpp | *.cxx | \
+ *.[fF][09]? | *.for | *.java | *.obj | *.sx | *.cu | *.cup)
+ func_xform "$libobj"
+ libobj=$func_xform_result
+ ;;
+ esac
+
+ case $libobj in
+ *.lo) func_lo2o "$libobj"; obj=$func_lo2o_result ;;
+ *)
+ func_fatal_error "cannot determine name of library object from \`$libobj'"
+ ;;
+ esac
+
+ func_infer_tag $base_compile
+
+ for arg in $later; do
+ case $arg in
+ -shared)
+ test "$build_libtool_libs" != yes && \
+ func_fatal_configuration "can not build a shared library"
+ build_old_libs=no
+ continue
+ ;;
+
+ -static)
+ build_libtool_libs=no
+ build_old_libs=yes
+ continue
+ ;;
+
+ -prefer-pic)
+ pic_mode=yes
+ continue
+ ;;
+
+ -prefer-non-pic)
+ pic_mode=no
+ continue
+ ;;
+ esac
+ done
+
+ func_quote_for_eval "$libobj"
+ test "X$libobj" != "X$func_quote_for_eval_result" \
+ && $ECHO "X$libobj" | $GREP '[]~#^*{};<>?"'"'"' &()|`$[]' \
+ && func_warning "libobj name \`$libobj' may not contain shell special characters."
+ func_dirname_and_basename "$obj" "/" ""
+ objname="$func_basename_result"
+ xdir="$func_dirname_result"
+ lobj=${xdir}$objdir/$objname
+
+ test -z "$base_compile" && \
+ func_fatal_help "you must specify a compilation command"
+
+ # Delete any leftover library objects.
+ if test "$build_old_libs" = yes; then
+ removelist="$obj $lobj $libobj ${libobj}T"
+ else
+ removelist="$lobj $libobj ${libobj}T"
+ fi
+
+ # On Cygwin there's no "real" PIC flag so we must build both object types
+ case $host_os in
+ cygwin* | mingw* | pw32* | os2* | cegcc*)
+ pic_mode=default
+ ;;
+ esac
+ if test "$pic_mode" = no && test "$deplibs_check_method" != pass_all; then
+ # non-PIC code in shared libraries is not supported
+ pic_mode=default
+ fi
+
+ # Calculate the filename of the output object if compiler does
+ # not support -o with -c
+ if test "$compiler_c_o" = no; then
+ output_obj=`$ECHO "$srcfile" | $SED 's%^.*/%%; s%\.[^.]*$%%'`.${objext}
+ lockfile="$output_obj.lock"
+ else
+ output_obj=
+ need_locks=no
+ lockfile=
+ fi
+
+ # Lock this critical section if it is needed
+ # We use this script file to make the link, it avoids creating a new file
+ if test "$need_locks" = yes; then
+ until $opt_dry_run || ln "$progpath" "$lockfile" 2>/dev/null; do
+ func_echo "Waiting for $lockfile to be removed"
+ sleep 2
+ done
+ elif test "$need_locks" = warn; then
+ if test -f "$lockfile"; then
+ $ECHO "\
+*** ERROR, $lockfile exists and contains:
+`cat $lockfile 2>/dev/null`
+
+This indicates that another process is trying to use the same
+temporary object file, and libtool could not work around it because
+your compiler does not support \`-c' and \`-o' together. If you
+repeat this compilation, it may succeed, by chance, but you had better
+avoid parallel builds (make -j) in this platform, or get a better
+compiler."
+
+ $opt_dry_run || $RM $removelist
+ exit $EXIT_FAILURE
+ fi
+ func_append removelist " $output_obj"
+ $ECHO "$srcfile" > "$lockfile"
+ fi
+
+ $opt_dry_run || $RM $removelist
+ func_append removelist " $lockfile"
+ trap '$opt_dry_run || $RM $removelist; exit $EXIT_FAILURE' 1 2 15
+
+ func_to_tool_file "$srcfile" func_convert_file_msys_to_w32
+ srcfile=$func_to_tool_file_result
+ func_quote_for_eval "$srcfile"
+ qsrcfile=$func_quote_for_eval_result
+
+ # Only build a PIC object if we are building libtool libraries.
+ if test "$build_libtool_libs" = yes; then
+ # Without this assignment, base_compile gets emptied.
+ fbsd_hideous_sh_bug=$base_compile
+
+ if test "$pic_mode" != no; then
+ command="$base_compile $qsrcfile $pic_flag"
+ else
+ # Don't build PIC code
+ command="$base_compile $qsrcfile"
+ fi
+
+ func_mkdir_p "$xdir$objdir"
+
+ if test -z "$output_obj"; then
+ # Place PIC objects in $objdir
+ func_append command " -o $lobj"
+ fi
+
+ func_show_eval_locale "$command" \
+ 'test -n "$output_obj" && $RM $removelist; exit $EXIT_FAILURE'
+
+ if test "$need_locks" = warn &&
+ test "X`cat $lockfile 2>/dev/null`" != "X$srcfile"; then
+ $ECHO "\
+*** ERROR, $lockfile contains:
+`cat $lockfile 2>/dev/null`
+
+but it should contain:
+$srcfile
+
+This indicates that another process is trying to use the same
+temporary object file, and libtool could not work around it because
+your compiler does not support \`-c' and \`-o' together. If you
+repeat this compilation, it may succeed, by chance, but you had better
+avoid parallel builds (make -j) in this platform, or get a better
+compiler."
+
+ $opt_dry_run || $RM $removelist
+ exit $EXIT_FAILURE
+ fi
+
+ # Just move the object if needed, then go on to compile the next one
+ if test -n "$output_obj" && test "X$output_obj" != "X$lobj"; then
+ func_show_eval '$MV "$output_obj" "$lobj"' \
+ 'error=$?; $opt_dry_run || $RM $removelist; exit $error'
+ fi
+
+ # Allow error messages only from the first compilation.
+ if test "$suppress_opt" = yes; then
+ suppress_output=' >/dev/null 2>&1'
+ fi
+ fi
+
+ # Only build a position-dependent object if we build old libraries.
+ if test "$build_old_libs" = yes; then
+ if test "$pic_mode" != yes; then
+ # Don't build PIC code
+ command="$base_compile $qsrcfile$pie_flag"
+ else
+ command="$base_compile $qsrcfile $pic_flag"
+ fi
+ if test "$compiler_c_o" = yes; then
+ func_append command " -o $obj"
+ fi
+
+ # Suppress compiler output if we already did a PIC compilation.
+ func_append command "$suppress_output"
+ func_show_eval_locale "$command" \
+ '$opt_dry_run || $RM $removelist; exit $EXIT_FAILURE'
+
+ if test "$need_locks" = warn &&
+ test "X`cat $lockfile 2>/dev/null`" != "X$srcfile"; then
+ $ECHO "\
+*** ERROR, $lockfile contains:
+`cat $lockfile 2>/dev/null`
+
+but it should contain:
+$srcfile
+
+This indicates that another process is trying to use the same
+temporary object file, and libtool could not work around it because
+your compiler does not support \`-c' and \`-o' together. If you
+repeat this compilation, it may succeed, by chance, but you had better
+avoid parallel builds (make -j) in this platform, or get a better
+compiler."
+
+ $opt_dry_run || $RM $removelist
+ exit $EXIT_FAILURE
+ fi
+
+ # Just move the object if needed
+ if test -n "$output_obj" && test "X$output_obj" != "X$obj"; then
+ func_show_eval '$MV "$output_obj" "$obj"' \
+ 'error=$?; $opt_dry_run || $RM $removelist; exit $error'
+ fi
+ fi
+
+ $opt_dry_run || {
+ func_write_libtool_object "$libobj" "$objdir/$objname" "$objname"
+
+ # Unlock the critical section if it was locked
+ if test "$need_locks" != no; then
+ removelist=$lockfile
+ $RM "$lockfile"
+ fi
+ }
+
+ exit $EXIT_SUCCESS
+}
+
+$opt_help || {
+ test "$opt_mode" = compile && func_mode_compile ${1+"$@"}
+}
+
+func_mode_help ()
+{
+ # We need to display help for each of the modes.
+ case $opt_mode in
+ "")
+ # Generic help is extracted from the usage comments
+ # at the start of this file.
+ func_help
+ ;;
+
+ clean)
+ $ECHO \
+"Usage: $progname [OPTION]... --mode=clean RM [RM-OPTION]... FILE...
+
+Remove files from the build directory.
+
+RM is the name of the program to use to delete files associated with each FILE
+(typically \`/bin/rm'). RM-OPTIONS are options (such as \`-f') to be passed
+to RM.
+
+If FILE is a libtool library, object or program, all the files associated
+with it are deleted. Otherwise, only FILE itself is deleted using RM."
+ ;;
+
+ compile)
+ $ECHO \
+"Usage: $progname [OPTION]... --mode=compile COMPILE-COMMAND... SOURCEFILE
+
+Compile a source file into a libtool library object.
+
+This mode accepts the following additional options:
+
+ -o OUTPUT-FILE set the output file name to OUTPUT-FILE
+ -no-suppress do not suppress compiler output for multiple passes
+ -prefer-pic try to build PIC objects only
+ -prefer-non-pic try to build non-PIC objects only
+ -shared do not build a \`.o' file suitable for static linking
+ -static only build a \`.o' file suitable for static linking
+ -Wc,FLAG pass FLAG directly to the compiler
+
+COMPILE-COMMAND is a command to be used in creating a \`standard' object file
+from the given SOURCEFILE.
+
+The output file name is determined by removing the directory component from
+SOURCEFILE, then substituting the C source code suffix \`.c' with the
+library object suffix, \`.lo'."
+ ;;
+
+ execute)
+ $ECHO \
+"Usage: $progname [OPTION]... --mode=execute COMMAND [ARGS]...
+
+Automatically set library path, then run a program.
+
+This mode accepts the following additional options:
+
+ -dlopen FILE add the directory containing FILE to the library path
+
+This mode sets the library path environment variable according to \`-dlopen'
+flags.
+
+If any of the ARGS are libtool executable wrappers, then they are translated
+into their corresponding uninstalled binary, and any of their required library
+directories are added to the library path.
+
+Then, COMMAND is executed, with ARGS as arguments."
+ ;;
+
+ finish)
+ $ECHO \
+"Usage: $progname [OPTION]... --mode=finish [LIBDIR]...
+
+Complete the installation of libtool libraries.
+
+Each LIBDIR is a directory that contains libtool libraries.
+
+The commands that this mode executes may require superuser privileges. Use
+the \`--dry-run' option if you just want to see what would be executed."
+ ;;
+
+ install)
+ $ECHO \
+"Usage: $progname [OPTION]... --mode=install INSTALL-COMMAND...
+
+Install executables or libraries.
+
+INSTALL-COMMAND is the installation command. The first component should be
+either the \`install' or \`cp' program.
+
+The following components of INSTALL-COMMAND are treated specially:
+
+ -inst-prefix-dir PREFIX-DIR Use PREFIX-DIR as a staging area for installation
+
+The rest of the components are interpreted as arguments to that command (only
+BSD-compatible install options are recognized)."
+ ;;
+
+ link)
+ $ECHO \
+"Usage: $progname [OPTION]... --mode=link LINK-COMMAND...
+
+Link object files or libraries together to form another library, or to
+create an executable program.
+
+LINK-COMMAND is a command using the C compiler that you would use to create
+a program from several object files.
+
+The following components of LINK-COMMAND are treated specially:
+
+ -all-static do not do any dynamic linking at all
+ -avoid-version do not add a version suffix if possible
+ -bindir BINDIR specify path to binaries directory (for systems where
+ libraries must be found in the PATH setting at runtime)
+ -dlopen FILE \`-dlpreopen' FILE if it cannot be dlopened at runtime
+ -dlpreopen FILE link in FILE and add its symbols to lt_preloaded_symbols
+ -export-dynamic allow symbols from OUTPUT-FILE to be resolved with dlsym(3)
+ -export-symbols SYMFILE
+ try to export only the symbols listed in SYMFILE
+ -export-symbols-regex REGEX
+ try to export only the symbols matching REGEX
+ -LLIBDIR search LIBDIR for required installed libraries
+ -lNAME OUTPUT-FILE requires the installed library libNAME
+ -module build a library that can dlopened
+ -no-fast-install disable the fast-install mode
+ -no-install link a not-installable executable
+ -no-undefined declare that a library does not refer to external symbols
+ -o OUTPUT-FILE create OUTPUT-FILE from the specified objects
+ -objectlist FILE Use a list of object files found in FILE to specify objects
+ -precious-files-regex REGEX
+ don't remove output files matching REGEX
+ -release RELEASE specify package release information
+ -rpath LIBDIR the created library will eventually be installed in LIBDIR
+ -R[ ]LIBDIR add LIBDIR to the runtime path of programs and libraries
+ -shared only do dynamic linking of libtool libraries
+ -shrext SUFFIX override the standard shared library file extension
+ -static do not do any dynamic linking of uninstalled libtool libraries
+ -static-libtool-libs
+ do not do any dynamic linking of libtool libraries
+ -version-info CURRENT[:REVISION[:AGE]]
+ specify library version info [each variable defaults to 0]
+ -weak LIBNAME declare that the target provides the LIBNAME interface
+ -Wc,FLAG
+ -Xcompiler FLAG pass linker-specific FLAG directly to the compiler
+ -Wl,FLAG
+ -Xlinker FLAG pass linker-specific FLAG directly to the linker
+ -XCClinker FLAG pass link-specific FLAG to the compiler driver (CC)
+
+All other options (arguments beginning with \`-') are ignored.
+
+Every other argument is treated as a filename. Files ending in \`.la' are
+treated as uninstalled libtool libraries, other files are standard or library
+object files.
+
+If the OUTPUT-FILE ends in \`.la', then a libtool library is created,
+only library objects (\`.lo' files) may be specified, and \`-rpath' is
+required, except when creating a convenience library.
+
+If OUTPUT-FILE ends in \`.a' or \`.lib', then a standard library is created
+using \`ar' and \`ranlib', or on Windows using \`lib'.
+
+If OUTPUT-FILE ends in \`.lo' or \`.${objext}', then a reloadable object file
+is created, otherwise an executable program is created."
+ ;;
+
+ uninstall)
+ $ECHO \
+"Usage: $progname [OPTION]... --mode=uninstall RM [RM-OPTION]... FILE...
+
+Remove libraries from an installation directory.
+
+RM is the name of the program to use to delete files associated with each FILE
+(typically \`/bin/rm'). RM-OPTIONS are options (such as \`-f') to be passed
+to RM.
+
+If FILE is a libtool library, all the files associated with it are deleted.
+Otherwise, only FILE itself is deleted using RM."
+ ;;
+
+ *)
+ func_fatal_help "invalid operation mode \`$opt_mode'"
+ ;;
+ esac
+
+ echo
+ $ECHO "Try \`$progname --help' for more information about other modes."
+}
+
+# Now that we've collected a possible --mode arg, show help if necessary
+if $opt_help; then
+ if test "$opt_help" = :; then
+ func_mode_help
+ else
+ {
+ func_help noexit
+ for opt_mode in compile link execute install finish uninstall clean; do
+ func_mode_help
+ done
+ } | sed -n '1p; 2,$s/^Usage:/ or: /p'
+ {
+ func_help noexit
+ for opt_mode in compile link execute install finish uninstall clean; do
+ echo
+ func_mode_help
+ done
+ } |
+ sed '1d
+ /^When reporting/,/^Report/{
+ H
+ d
+ }
+ $x
+ /information about other modes/d
+ /more detailed .*MODE/d
+ s/^Usage:.*--mode=\([^ ]*\) .*/Description of \1 mode:/'
+ fi
+ exit $?
+fi
+
+
+# func_mode_execute arg...
+func_mode_execute ()
+{
+ $opt_debug
+ # The first argument is the command name.
+ cmd="$nonopt"
+ test -z "$cmd" && \
+ func_fatal_help "you must specify a COMMAND"
+
+ # Handle -dlopen flags immediately.
+ for file in $opt_dlopen; do
+ test -f "$file" \
+ || func_fatal_help "\`$file' is not a file"
+
+ dir=
+ case $file in
+ *.la)
+ func_resolve_sysroot "$file"
+ file=$func_resolve_sysroot_result
+
+ # Check to see that this really is a libtool archive.
+ func_lalib_unsafe_p "$file" \
+ || func_fatal_help "\`$lib' is not a valid libtool archive"
+
+ # Read the libtool library.
+ dlname=
+ library_names=
+ func_source "$file"
+
+ # Skip this library if it cannot be dlopened.
+ if test -z "$dlname"; then
+ # Warn if it was a shared library.
+ test -n "$library_names" && \
+ func_warning "\`$file' was not linked with \`-export-dynamic'"
+ continue
+ fi
+
+ func_dirname "$file" "" "."
+ dir="$func_dirname_result"
+
+ if test -f "$dir/$objdir/$dlname"; then
+ func_append dir "/$objdir"
+ else
+ if test ! -f "$dir/$dlname"; then
+ func_fatal_error "cannot find \`$dlname' in \`$dir' or \`$dir/$objdir'"
+ fi
+ fi
+ ;;
+
+ *.lo)
+ # Just add the directory containing the .lo file.
+ func_dirname "$file" "" "."
+ dir="$func_dirname_result"
+ ;;
+
+ *)
+ func_warning "\`-dlopen' is ignored for non-libtool libraries and objects"
+ continue
+ ;;
+ esac
+
+ # Get the absolute pathname.
+ absdir=`cd "$dir" && pwd`
+ test -n "$absdir" && dir="$absdir"
+
+ # Now add the directory to shlibpath_var.
+ if eval "test -z \"\$$shlibpath_var\""; then
+ eval "$shlibpath_var=\"\$dir\""
+ else
+ eval "$shlibpath_var=\"\$dir:\$$shlibpath_var\""
+ fi
+ done
+
+ # This variable tells wrapper scripts just to set shlibpath_var
+ # rather than running their programs.
+ libtool_execute_magic="$magic"
+
+ # Check if any of the arguments is a wrapper script.
+ args=
+ for file
+ do
+ case $file in
+ -* | *.la | *.lo ) ;;
+ *)
+ # Do a test to see if this is really a libtool program.
+ if func_ltwrapper_script_p "$file"; then
+ func_source "$file"
+ # Transform arg to wrapped name.
+ file="$progdir/$program"
+ elif func_ltwrapper_executable_p "$file"; then
+ func_ltwrapper_scriptname "$file"
+ func_source "$func_ltwrapper_scriptname_result"
+ # Transform arg to wrapped name.
+ file="$progdir/$program"
+ fi
+ ;;
+ esac
+ # Quote arguments (to preserve shell metacharacters).
+ func_append_quoted args "$file"
+ done
+
+ if test "X$opt_dry_run" = Xfalse; then
+ if test -n "$shlibpath_var"; then
+ # Export the shlibpath_var.
+ eval "export $shlibpath_var"
+ fi
+
+ # Restore saved environment variables
+ for lt_var in LANG LANGUAGE LC_ALL LC_CTYPE LC_COLLATE LC_MESSAGES
+ do
+ eval "if test \"\${save_$lt_var+set}\" = set; then
+ $lt_var=\$save_$lt_var; export $lt_var
+ else
+ $lt_unset $lt_var
+ fi"
+ done
+
+ # Now prepare to actually exec the command.
+ exec_cmd="\$cmd$args"
+ else
+ # Display what would be done.
+ if test -n "$shlibpath_var"; then
+ eval "\$ECHO \"\$shlibpath_var=\$$shlibpath_var\""
+ echo "export $shlibpath_var"
+ fi
+ $ECHO "$cmd$args"
+ exit $EXIT_SUCCESS
+ fi
+}
+
+test "$opt_mode" = execute && func_mode_execute ${1+"$@"}
+
+
+# func_mode_finish arg...
+func_mode_finish ()
+{
+ $opt_debug
+ libs=
+ libdirs=
+ admincmds=
+
+ for opt in "$nonopt" ${1+"$@"}
+ do
+ if test -d "$opt"; then
+ func_append libdirs " $opt"
+
+ elif test -f "$opt"; then
+ if func_lalib_unsafe_p "$opt"; then
+ func_append libs " $opt"
+ else
+ func_warning "\`$opt' is not a valid libtool archive"
+ fi
+
+ else
+ func_fatal_error "invalid argument \`$opt'"
+ fi
+ done
+
+ if test -n "$libs"; then
+ if test -n "$lt_sysroot"; then
+ sysroot_regex=`$ECHO "$lt_sysroot" | $SED "$sed_make_literal_regex"`
+ sysroot_cmd="s/\([ ']\)$sysroot_regex/\1/g;"
+ else
+ sysroot_cmd=
+ fi
+
+ # Remove sysroot references
+ if $opt_dry_run; then
+ for lib in $libs; do
+ echo "removing references to $lt_sysroot and \`=' prefixes from $lib"
+ done
+ else
+ tmpdir=`func_mktempdir`
+ for lib in $libs; do
+ sed -e "${sysroot_cmd} s/\([ ']-[LR]\)=/\1/g; s/\([ ']\)=/\1/g" $lib \
+ > $tmpdir/tmp-la
+ mv -f $tmpdir/tmp-la $lib
+ done
+ ${RM}r "$tmpdir"
+ fi
+ fi
+
+ if test -n "$finish_cmds$finish_eval" && test -n "$libdirs"; then
+ for libdir in $libdirs; do
+ if test -n "$finish_cmds"; then
+ # Do each command in the finish commands.
+ func_execute_cmds "$finish_cmds" 'admincmds="$admincmds
+'"$cmd"'"'
+ fi
+ if test -n "$finish_eval"; then
+ # Do the single finish_eval.
+ eval cmds=\"$finish_eval\"
+ $opt_dry_run || eval "$cmds" || func_append admincmds "
+ $cmds"
+ fi
+ done
+ fi
+
+ # Exit here if they wanted silent mode.
+ $opt_silent && exit $EXIT_SUCCESS
+
+ if test -n "$finish_cmds$finish_eval" && test -n "$libdirs"; then
+ echo "----------------------------------------------------------------------"
+ echo "Libraries have been installed in:"
+ for libdir in $libdirs; do
+ $ECHO " $libdir"
+ done
+ echo
+ echo "If you ever happen to want to link against installed libraries"
+ echo "in a given directory, LIBDIR, you must either use libtool, and"
+ echo "specify the full pathname of the library, or use the \`-LLIBDIR'"
+ echo "flag during linking and do at least one of the following:"
+ if test -n "$shlibpath_var"; then
+ echo " - add LIBDIR to the \`$shlibpath_var' environment variable"
+ echo " during execution"
+ fi
+ if test -n "$runpath_var"; then
+ echo " - add LIBDIR to the \`$runpath_var' environment variable"
+ echo " during linking"
+ fi
+ if test -n "$hardcode_libdir_flag_spec"; then
+ libdir=LIBDIR
+ eval flag=\"$hardcode_libdir_flag_spec\"
+
+ $ECHO " - use the \`$flag' linker flag"
+ fi
+ if test -n "$admincmds"; then
+ $ECHO " - have your system administrator run these commands:$admincmds"
+ fi
+ if test -f /etc/ld.so.conf; then
+ echo " - have your system administrator add LIBDIR to \`/etc/ld.so.conf'"
+ fi
+ echo
+
+ echo "See any operating system documentation about shared libraries for"
+ case $host in
+ solaris2.[6789]|solaris2.1[0-9])
+ echo "more information, such as the ld(1), crle(1) and ld.so(8) manual"
+ echo "pages."
+ ;;
+ *)
+ echo "more information, such as the ld(1) and ld.so(8) manual pages."
+ ;;
+ esac
+ echo "----------------------------------------------------------------------"
+ fi
+ exit $EXIT_SUCCESS
+}
+
+test "$opt_mode" = finish && func_mode_finish ${1+"$@"}
+
+
+# func_mode_install arg...
+func_mode_install ()
+{
+ $opt_debug
+ # There may be an optional sh(1) argument at the beginning of
+ # install_prog (especially on Windows NT).
+ if test "$nonopt" = "$SHELL" || test "$nonopt" = /bin/sh ||
+ # Allow the use of GNU shtool's install command.
+ case $nonopt in *shtool*) :;; *) false;; esac; then
+ # Aesthetically quote it.
+ func_quote_for_eval "$nonopt"
+ install_prog="$func_quote_for_eval_result "
+ arg=$1
+ shift
+ else
+ install_prog=
+ arg=$nonopt
+ fi
+
+ # The real first argument should be the name of the installation program.
+ # Aesthetically quote it.
+ func_quote_for_eval "$arg"
+ func_append install_prog "$func_quote_for_eval_result"
+ install_shared_prog=$install_prog
+ case " $install_prog " in
+ *[\\\ /]cp\ *) install_cp=: ;;
+ *) install_cp=false ;;
+ esac
+
+ # We need to accept at least all the BSD install flags.
+ dest=
+ files=
+ opts=
+ prev=
+ install_type=
+ isdir=no
+ stripme=
+ no_mode=:
+ for arg
+ do
+ arg2=
+ if test -n "$dest"; then
+ func_append files " $dest"
+ dest=$arg
+ continue
+ fi
+
+ case $arg in
+ -d) isdir=yes ;;
+ -f)
+ if $install_cp; then :; else
+ prev=$arg
+ fi
+ ;;
+ -g | -m | -o)
+ prev=$arg
+ ;;
+ -s)
+ stripme=" -s"
+ continue
+ ;;
+ -*)
+ ;;
+ *)
+ # If the previous option needed an argument, then skip it.
+ if test -n "$prev"; then
+ if test "x$prev" = x-m && test -n "$install_override_mode"; then
+ arg2=$install_override_mode
+ no_mode=false
+ fi
+ prev=
+ else
+ dest=$arg
+ continue
+ fi
+ ;;
+ esac
+
+ # Aesthetically quote the argument.
+ func_quote_for_eval "$arg"
+ func_append install_prog " $func_quote_for_eval_result"
+ if test -n "$arg2"; then
+ func_quote_for_eval "$arg2"
+ fi
+ func_append install_shared_prog " $func_quote_for_eval_result"
+ done
+
+ test -z "$install_prog" && \
+ func_fatal_help "you must specify an install program"
+
+ test -n "$prev" && \
+ func_fatal_help "the \`$prev' option requires an argument"
+
+ if test -n "$install_override_mode" && $no_mode; then
+ if $install_cp; then :; else
+ func_quote_for_eval "$install_override_mode"
+ func_append install_shared_prog " -m $func_quote_for_eval_result"
+ fi
+ fi
+
+ if test -z "$files"; then
+ if test -z "$dest"; then
+ func_fatal_help "no file or destination specified"
+ else
+ func_fatal_help "you must specify a destination"
+ fi
+ fi
+
+ # Strip any trailing slash from the destination.
+ func_stripname '' '/' "$dest"
+ dest=$func_stripname_result
+
+ # Check to see that the destination is a directory.
+ test -d "$dest" && isdir=yes
+ if test "$isdir" = yes; then
+ destdir="$dest"
+ destname=
+ else
+ func_dirname_and_basename "$dest" "" "."
+ destdir="$func_dirname_result"
+ destname="$func_basename_result"
+
+ # Not a directory, so check to see that there is only one file specified.
+ set dummy $files; shift
+ test "$#" -gt 1 && \
+ func_fatal_help "\`$dest' is not a directory"
+ fi
+ case $destdir in
+ [\\/]* | [A-Za-z]:[\\/]*) ;;
+ *)
+ for file in $files; do
+ case $file in
+ *.lo) ;;
+ *)
+ func_fatal_help "\`$destdir' must be an absolute directory name"
+ ;;
+ esac
+ done
+ ;;
+ esac
+
+ # This variable tells wrapper scripts just to set variables rather
+ # than running their programs.
+ libtool_install_magic="$magic"
+
+ staticlibs=
+ future_libdirs=
+ current_libdirs=
+ for file in $files; do
+
+ # Do each installation.
+ case $file in
+ *.$libext)
+ # Do the static libraries later.
+ func_append staticlibs " $file"
+ ;;
+
+ *.la)
+ func_resolve_sysroot "$file"
+ file=$func_resolve_sysroot_result
+
+ # Check to see that this really is a libtool archive.
+ func_lalib_unsafe_p "$file" \
+ || func_fatal_help "\`$file' is not a valid libtool archive"
+
+ library_names=
+ old_library=
+ relink_command=
+ func_source "$file"
+
+ # Add the libdir to current_libdirs if it is the destination.
+ if test "X$destdir" = "X$libdir"; then
+ case "$current_libdirs " in
+ *" $libdir "*) ;;
+ *) func_append current_libdirs " $libdir" ;;
+ esac
+ else
+ # Note the libdir as a future libdir.
+ case "$future_libdirs " in
+ *" $libdir "*) ;;
+ *) func_append future_libdirs " $libdir" ;;
+ esac
+ fi
+
+ func_dirname "$file" "/" ""
+ dir="$func_dirname_result"
+ func_append dir "$objdir"
+
+ if test -n "$relink_command"; then
+ # Determine the prefix the user has applied to our future dir.
+ inst_prefix_dir=`$ECHO "$destdir" | $SED -e "s%$libdir\$%%"`
+
+ # Don't allow the user to place us outside of our expected
+ # location b/c this prevents finding dependent libraries that
+ # are installed to the same prefix.
+ # At present, this check doesn't affect windows .dll's that
+ # are installed into $libdir/../bin (currently, that works fine)
+ # but it's something to keep an eye on.
+ test "$inst_prefix_dir" = "$destdir" && \
+ func_fatal_error "error: cannot install \`$file' to a directory not ending in $libdir"
+
+ if test -n "$inst_prefix_dir"; then
+ # Stick the inst_prefix_dir data into the link command.
+ relink_command=`$ECHO "$relink_command" | $SED "s%@inst_prefix_dir@%-inst-prefix-dir $inst_prefix_dir%"`
+ else
+ relink_command=`$ECHO "$relink_command" | $SED "s%@inst_prefix_dir@%%"`
+ fi
+
+ func_warning "relinking \`$file'"
+ func_show_eval "$relink_command" \
+ 'func_fatal_error "error: relink \`$file'\'' with the above command before installing it"'
+ fi
+
+ # See the names of the shared library.
+ set dummy $library_names; shift
+ if test -n "$1"; then
+ realname="$1"
+ shift
+
+ srcname="$realname"
+ test -n "$relink_command" && srcname="$realname"T
+
+ # Install the shared library and build the symlinks.
+ func_show_eval "$install_shared_prog $dir/$srcname $destdir/$realname" \
+ 'exit $?'
+ tstripme="$stripme"
+ case $host_os in
+ cygwin* | mingw* | pw32* | cegcc*)
+ case $realname in
+ *.dll.a)
+ tstripme=""
+ ;;
+ esac
+ ;;
+ esac
+ if test -n "$tstripme" && test -n "$striplib"; then
+ func_show_eval "$striplib $destdir/$realname" 'exit $?'
+ fi
+
+ if test "$#" -gt 0; then
+ # Delete the old symlinks, and create new ones.
+ # Try `ln -sf' first, because the `ln' binary might depend on
+ # the symlink we replace! Solaris /bin/ln does not understand -f,
+ # so we also need to try rm && ln -s.
+ for linkname
+ do
+ test "$linkname" != "$realname" \
+ && func_show_eval "(cd $destdir && { $LN_S -f $realname $linkname || { $RM $linkname && $LN_S $realname $linkname; }; })"
+ done
+ fi
+
+ # Do each command in the postinstall commands.
+ lib="$destdir/$realname"
+ func_execute_cmds "$postinstall_cmds" 'exit $?'
+ fi
+
+ # Install the pseudo-library for information purposes.
+ func_basename "$file"
+ name="$func_basename_result"
+ instname="$dir/$name"i
+ func_show_eval "$install_prog $instname $destdir/$name" 'exit $?'
+
+ # Maybe install the static library, too.
+ test -n "$old_library" && func_append staticlibs " $dir/$old_library"
+ ;;
+
+ *.lo)
+ # Install (i.e. copy) a libtool object.
+
+ # Figure out destination file name, if it wasn't already specified.
+ if test -n "$destname"; then
+ destfile="$destdir/$destname"
+ else
+ func_basename "$file"
+ destfile="$func_basename_result"
+ destfile="$destdir/$destfile"
+ fi
+
+ # Deduce the name of the destination old-style object file.
+ case $destfile in
+ *.lo)
+ func_lo2o "$destfile"
+ staticdest=$func_lo2o_result
+ ;;
+ *.$objext)
+ staticdest="$destfile"
+ destfile=
+ ;;
+ *)
+ func_fatal_help "cannot copy a libtool object to \`$destfile'"
+ ;;
+ esac
+
+ # Install the libtool object if requested.
+ test -n "$destfile" && \
+ func_show_eval "$install_prog $file $destfile" 'exit $?'
+
+ # Install the old object if enabled.
+ if test "$build_old_libs" = yes; then
+ # Deduce the name of the old-style object file.
+ func_lo2o "$file"
+ staticobj=$func_lo2o_result
+ func_show_eval "$install_prog \$staticobj \$staticdest" 'exit $?'
+ fi
+ exit $EXIT_SUCCESS
+ ;;
+
+ *)
+ # Figure out destination file name, if it wasn't already specified.
+ if test -n "$destname"; then
+ destfile="$destdir/$destname"
+ else
+ func_basename "$file"
+ destfile="$func_basename_result"
+ destfile="$destdir/$destfile"
+ fi
+
+ # If the file is missing, and there is a .exe on the end, strip it
+ # because it is most likely a libtool script we actually want to
+ # install
+ stripped_ext=""
+ case $file in
+ *.exe)
+ if test ! -f "$file"; then
+ func_stripname '' '.exe' "$file"
+ file=$func_stripname_result
+ stripped_ext=".exe"
+ fi
+ ;;
+ esac
+
+ # Do a test to see if this is really a libtool program.
+ case $host in
+ *cygwin* | *mingw*)
+ if func_ltwrapper_executable_p "$file"; then
+ func_ltwrapper_scriptname "$file"
+ wrapper=$func_ltwrapper_scriptname_result
+ else
+ func_stripname '' '.exe' "$file"
+ wrapper=$func_stripname_result
+ fi
+ ;;
+ *)
+ wrapper=$file
+ ;;
+ esac
+ if func_ltwrapper_script_p "$wrapper"; then
+ notinst_deplibs=
+ relink_command=
+
+ func_source "$wrapper"
+
+ # Check the variables that should have been set.
+ test -z "$generated_by_libtool_version" && \
+ func_fatal_error "invalid libtool wrapper script \`$wrapper'"
+
+ finalize=yes
+ for lib in $notinst_deplibs; do
+ # Check to see that each library is installed.
+ libdir=
+ if test -f "$lib"; then
+ func_source "$lib"
+ fi
+ libfile="$libdir/"`$ECHO "$lib" | $SED 's%^.*/%%g'` ### testsuite: skip nested quoting test
+ if test -n "$libdir" && test ! -f "$libfile"; then
+ func_warning "\`$lib' has not been installed in \`$libdir'"
+ finalize=no
+ fi
+ done
+
+ relink_command=
+ func_source "$wrapper"
+
+ outputname=
+ if test "$fast_install" = no && test -n "$relink_command"; then
+ $opt_dry_run || {
+ if test "$finalize" = yes; then
+ tmpdir=`func_mktempdir`
+ func_basename "$file$stripped_ext"
+ file="$func_basename_result"
+ outputname="$tmpdir/$file"
+ # Replace the output file specification.
+ relink_command=`$ECHO "$relink_command" | $SED 's%@OUTPUT@%'"$outputname"'%g'`
+
+ $opt_silent || {
+ func_quote_for_expand "$relink_command"
+ eval "func_echo $func_quote_for_expand_result"
+ }
+ if eval "$relink_command"; then :
+ else
+ func_error "error: relink \`$file' with the above command before installing it"
+ $opt_dry_run || ${RM}r "$tmpdir"
+ continue
+ fi
+ file="$outputname"
+ else
+ func_warning "cannot relink \`$file'"
+ fi
+ }
+ else
+ # Install the binary that we compiled earlier.
+ file=`$ECHO "$file$stripped_ext" | $SED "s%\([^/]*\)$%$objdir/\1%"`
+ fi
+ fi
+
+ # remove .exe since cygwin /usr/bin/install will append another
+ # one anyway
+ case $install_prog,$host in
+ */usr/bin/install*,*cygwin*)
+ case $file:$destfile in
+ *.exe:*.exe)
+ # this is ok
+ ;;
+ *.exe:*)
+ destfile=$destfile.exe
+ ;;
+ *:*.exe)
+ func_stripname '' '.exe' "$destfile"
+ destfile=$func_stripname_result
+ ;;
+ esac
+ ;;
+ esac
+ func_show_eval "$install_prog\$stripme \$file \$destfile" 'exit $?'
+ $opt_dry_run || if test -n "$outputname"; then
+ ${RM}r "$tmpdir"
+ fi
+ ;;
+ esac
+ done
+
+ for file in $staticlibs; do
+ func_basename "$file"
+ name="$func_basename_result"
+
+ # Set up the ranlib parameters.
+ oldlib="$destdir/$name"
+
+ func_show_eval "$install_prog \$file \$oldlib" 'exit $?'
+
+ if test -n "$stripme" && test -n "$old_striplib"; then
+ func_show_eval "$old_striplib $oldlib" 'exit $?'
+ fi
+
+ # Do each command in the postinstall commands.
+ func_execute_cmds "$old_postinstall_cmds" 'exit $?'
+ done
+
+ test -n "$future_libdirs" && \
+ func_warning "remember to run \`$progname --finish$future_libdirs'"
+
+ if test -n "$current_libdirs"; then
+ # Maybe just do a dry run.
+ $opt_dry_run && current_libdirs=" -n$current_libdirs"
+ exec_cmd='$SHELL $progpath $preserve_args --finish$current_libdirs'
+ else
+ exit $EXIT_SUCCESS
+ fi
+}
+
+test "$opt_mode" = install && func_mode_install ${1+"$@"}
+
+
+# func_generate_dlsyms outputname originator pic_p
+# Extract symbols from dlprefiles and create ${outputname}S.o with
+# a dlpreopen symbol table.
+func_generate_dlsyms ()
+{
+ $opt_debug
+ my_outputname="$1"
+ my_originator="$2"
+ my_pic_p="${3-no}"
+ my_prefix=`$ECHO "$my_originator" | sed 's%[^a-zA-Z0-9]%_%g'`
+ my_dlsyms=
+
+ if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then
+ if test -n "$NM" && test -n "$global_symbol_pipe"; then
+ my_dlsyms="${my_outputname}S.c"
+ else
+ func_error "not configured to extract global symbols from dlpreopened files"
+ fi
+ fi
+
+ if test -n "$my_dlsyms"; then
+ case $my_dlsyms in
+ "") ;;
+ *.c)
+ # Discover the nlist of each of the dlfiles.
+ nlist="$output_objdir/${my_outputname}.nm"
+
+ func_show_eval "$RM $nlist ${nlist}S ${nlist}T"
+
+ # Parse the name list into a source file.
+ func_verbose "creating $output_objdir/$my_dlsyms"
+
+ $opt_dry_run || $ECHO > "$output_objdir/$my_dlsyms" "\
+/* $my_dlsyms - symbol resolution table for \`$my_outputname' dlsym emulation. */
+/* Generated by $PROGRAM (GNU $PACKAGE$TIMESTAMP) $VERSION */
+
+#ifdef __cplusplus
+extern \"C\" {
+#endif
+
+#if defined(__GNUC__) && (((__GNUC__ == 4) && (__GNUC_MINOR__ >= 4)) || (__GNUC__ > 4))
+#pragma GCC diagnostic ignored \"-Wstrict-prototypes\"
+#endif
+
+/* Keep this code in sync between libtool.m4, ltmain, lt_system.h, and tests. */
+#if defined(_WIN32) || defined(__CYGWIN__) || defined(_WIN32_WCE)
+/* DATA imports from DLLs on WIN32 con't be const, because runtime
+ relocations are performed -- see ld's documentation on pseudo-relocs. */
+# define LT_DLSYM_CONST
+#elif defined(__osf__)
+/* This system does not cope well with relocations in const data. */
+# define LT_DLSYM_CONST
+#else
+# define LT_DLSYM_CONST const
+#endif
+
+/* External symbol declarations for the compiler. */\
+"
+
+ if test "$dlself" = yes; then
+ func_verbose "generating symbol list for \`$output'"
+
+ $opt_dry_run || echo ': @PROGRAM@ ' > "$nlist"
+
+ # Add our own program objects to the symbol list.
+ progfiles=`$ECHO "$objs$old_deplibs" | $SP2NL | $SED "$lo2o" | $NL2SP`
+ for progfile in $progfiles; do
+ func_to_tool_file "$progfile" func_convert_file_msys_to_w32
+ func_verbose "extracting global C symbols from \`$func_to_tool_file_result'"
+ $opt_dry_run || eval "$NM $func_to_tool_file_result | $global_symbol_pipe >> '$nlist'"
+ done
+
+ if test -n "$exclude_expsyms"; then
+ $opt_dry_run || {
+ eval '$EGREP -v " ($exclude_expsyms)$" "$nlist" > "$nlist"T'
+ eval '$MV "$nlist"T "$nlist"'
+ }
+ fi
+
+ if test -n "$export_symbols_regex"; then
+ $opt_dry_run || {
+ eval '$EGREP -e "$export_symbols_regex" "$nlist" > "$nlist"T'
+ eval '$MV "$nlist"T "$nlist"'
+ }
+ fi
+
+ # Prepare the list of exported symbols
+ if test -z "$export_symbols"; then
+ export_symbols="$output_objdir/$outputname.exp"
+ $opt_dry_run || {
+ $RM $export_symbols
+ eval "${SED} -n -e '/^: @PROGRAM@ $/d' -e 's/^.* \(.*\)$/\1/p' "'< "$nlist" > "$export_symbols"'
+ case $host in
+ *cygwin* | *mingw* | *cegcc* )
+ eval "echo EXPORTS "'> "$output_objdir/$outputname.def"'
+ eval 'cat "$export_symbols" >> "$output_objdir/$outputname.def"'
+ ;;
+ esac
+ }
+ else
+ $opt_dry_run || {
+ eval "${SED} -e 's/\([].[*^$]\)/\\\\\1/g' -e 's/^/ /' -e 's/$/$/'"' < "$export_symbols" > "$output_objdir/$outputname.exp"'
+ eval '$GREP -f "$output_objdir/$outputname.exp" < "$nlist" > "$nlist"T'
+ eval '$MV "$nlist"T "$nlist"'
+ case $host in
+ *cygwin* | *mingw* | *cegcc* )
+ eval "echo EXPORTS "'> "$output_objdir/$outputname.def"'
+ eval 'cat "$nlist" >> "$output_objdir/$outputname.def"'
+ ;;
+ esac
+ }
+ fi
+ fi
+
+ for dlprefile in $dlprefiles; do
+ func_verbose "extracting global C symbols from \`$dlprefile'"
+ func_basename "$dlprefile"
+ name="$func_basename_result"
+ case $host in
+ *cygwin* | *mingw* | *cegcc* )
+ # if an import library, we need to obtain dlname
+ if func_win32_import_lib_p "$dlprefile"; then
+ func_tr_sh "$dlprefile"
+ eval "curr_lafile=\$libfile_$func_tr_sh_result"
+ dlprefile_dlbasename=""
+ if test -n "$curr_lafile" && func_lalib_p "$curr_lafile"; then
+ # Use subshell, to avoid clobbering current variable values
+ dlprefile_dlname=`source "$curr_lafile" && echo "$dlname"`
+ if test -n "$dlprefile_dlname" ; then
+ func_basename "$dlprefile_dlname"
+ dlprefile_dlbasename="$func_basename_result"
+ else
+ # no lafile. user explicitly requested -dlpreopen <import library>.
+ $sharedlib_from_linklib_cmd "$dlprefile"
+ dlprefile_dlbasename=$sharedlib_from_linklib_result
+ fi
+ fi
+ $opt_dry_run || {
+ if test -n "$dlprefile_dlbasename" ; then
+ eval '$ECHO ": $dlprefile_dlbasename" >> "$nlist"'
+ else
+ func_warning "Could not compute DLL name from $name"
+ eval '$ECHO ": $name " >> "$nlist"'
+ fi
+ func_to_tool_file "$dlprefile" func_convert_file_msys_to_w32
+ eval "$NM \"$func_to_tool_file_result\" 2>/dev/null | $global_symbol_pipe |
+ $SED -e '/I __imp/d' -e 's/I __nm_/D /;s/_nm__//' >> '$nlist'"
+ }
+ else # not an import lib
+ $opt_dry_run || {
+ eval '$ECHO ": $name " >> "$nlist"'
+ func_to_tool_file "$dlprefile" func_convert_file_msys_to_w32
+ eval "$NM \"$func_to_tool_file_result\" 2>/dev/null | $global_symbol_pipe >> '$nlist'"
+ }
+ fi
+ ;;
+ *)
+ $opt_dry_run || {
+ eval '$ECHO ": $name " >> "$nlist"'
+ func_to_tool_file "$dlprefile" func_convert_file_msys_to_w32
+ eval "$NM \"$func_to_tool_file_result\" 2>/dev/null | $global_symbol_pipe >> '$nlist'"
+ }
+ ;;
+ esac
+ done
+
+ $opt_dry_run || {
+ # Make sure we have at least an empty file.
+ test -f "$nlist" || : > "$nlist"
+
+ if test -n "$exclude_expsyms"; then
+ $EGREP -v " ($exclude_expsyms)$" "$nlist" > "$nlist"T
+ $MV "$nlist"T "$nlist"
+ fi
+
+ # Try sorting and uniquifying the output.
+ if $GREP -v "^: " < "$nlist" |
+ if sort -k 3 </dev/null >/dev/null 2>&1; then
+ sort -k 3
+ else
+ sort +2
+ fi |
+ uniq > "$nlist"S; then
+ :
+ else
+ $GREP -v "^: " < "$nlist" > "$nlist"S
+ fi
+
+ if test -f "$nlist"S; then
+ eval "$global_symbol_to_cdecl"' < "$nlist"S >> "$output_objdir/$my_dlsyms"'
+ else
+ echo '/* NONE */' >> "$output_objdir/$my_dlsyms"
+ fi
+
+ echo >> "$output_objdir/$my_dlsyms" "\
+
+/* The mapping between symbol names and symbols. */
+typedef struct {
+ const char *name;
+ void *address;
+} lt_dlsymlist;
+extern LT_DLSYM_CONST lt_dlsymlist
+lt_${my_prefix}_LTX_preloaded_symbols[];
+LT_DLSYM_CONST lt_dlsymlist
+lt_${my_prefix}_LTX_preloaded_symbols[] =
+{\
+ { \"$my_originator\", (void *) 0 },"
+
+ case $need_lib_prefix in
+ no)
+ eval "$global_symbol_to_c_name_address" < "$nlist" >> "$output_objdir/$my_dlsyms"
+ ;;
+ *)
+ eval "$global_symbol_to_c_name_address_lib_prefix" < "$nlist" >> "$output_objdir/$my_dlsyms"
+ ;;
+ esac
+ echo >> "$output_objdir/$my_dlsyms" "\
+ {0, (void *) 0}
+};
+
+/* This works around a problem in FreeBSD linker */
+#ifdef FREEBSD_WORKAROUND
+static const void *lt_preloaded_setup() {
+ return lt_${my_prefix}_LTX_preloaded_symbols;
+}
+#endif
+
+#ifdef __cplusplus
+}
+#endif\
+"
+ } # !$opt_dry_run
+
+ pic_flag_for_symtable=
+ case "$compile_command " in
+ *" -static "*) ;;
+ *)
+ case $host in
+ # compiling the symbol table file with pic_flag works around
+ # a FreeBSD bug that causes programs to crash when -lm is
+ # linked before any other PIC object. But we must not use
+ # pic_flag when linking with -static. The problem exists in
+ # FreeBSD 2.2.6 and is fixed in FreeBSD 3.1.
+ *-*-freebsd2*|*-*-freebsd3.0*|*-*-freebsdelf3.0*)
+ pic_flag_for_symtable=" $pic_flag -DFREEBSD_WORKAROUND" ;;
+ *-*-hpux*)
+ pic_flag_for_symtable=" $pic_flag" ;;
+ *)
+ if test "X$my_pic_p" != Xno; then
+ pic_flag_for_symtable=" $pic_flag"
+ fi
+ ;;
+ esac
+ ;;
+ esac
+ symtab_cflags=
+ for arg in $LTCFLAGS; do
+ case $arg in
+ -pie | -fpie | -fPIE) ;;
+ *) func_append symtab_cflags " $arg" ;;
+ esac
+ done
+
+ # Now compile the dynamic symbol file.
+ func_show_eval '(cd $output_objdir && $LTCC$symtab_cflags -c$no_builtin_flag$pic_flag_for_symtable "$my_dlsyms")' 'exit $?'
+
+ # Clean up the generated files.
+ func_show_eval '$RM "$output_objdir/$my_dlsyms" "$nlist" "${nlist}S" "${nlist}T"'
+
+ # Transform the symbol file into the correct name.
+ symfileobj="$output_objdir/${my_outputname}S.$objext"
+ case $host in
+ *cygwin* | *mingw* | *cegcc* )
+ if test -f "$output_objdir/$my_outputname.def"; then
+ compile_command=`$ECHO "$compile_command" | $SED "s%@SYMFILE@%$output_objdir/$my_outputname.def $symfileobj%"`
+ finalize_command=`$ECHO "$finalize_command" | $SED "s%@SYMFILE@%$output_objdir/$my_outputname.def $symfileobj%"`
+ else
+ compile_command=`$ECHO "$compile_command" | $SED "s%@SYMFILE@%$symfileobj%"`
+ finalize_command=`$ECHO "$finalize_command" | $SED "s%@SYMFILE@%$symfileobj%"`
+ fi
+ ;;
+ *)
+ compile_command=`$ECHO "$compile_command" | $SED "s%@SYMFILE@%$symfileobj%"`
+ finalize_command=`$ECHO "$finalize_command" | $SED "s%@SYMFILE@%$symfileobj%"`
+ ;;
+ esac
+ ;;
+ *)
+ func_fatal_error "unknown suffix for \`$my_dlsyms'"
+ ;;
+ esac
+ else
+ # We keep going just in case the user didn't refer to
+ # lt_preloaded_symbols. The linker will fail if global_symbol_pipe
+ # really was required.
+
+ # Nullify the symbol file.
+ compile_command=`$ECHO "$compile_command" | $SED "s% @SYMFILE@%%"`
+ finalize_command=`$ECHO "$finalize_command" | $SED "s% @SYMFILE@%%"`
+ fi
+}
+
+# func_win32_libid arg
+# return the library type of file 'arg'
+#
+# Need a lot of goo to handle *both* DLLs and import libs
+# Has to be a shell function in order to 'eat' the argument
+# that is supplied when $file_magic_command is called.
+# Despite the name, also deal with 64 bit binaries.
+func_win32_libid ()
+{
+ $opt_debug
+ win32_libid_type="unknown"
+ win32_fileres=`file -L $1 2>/dev/null`
+ case $win32_fileres in
+ *ar\ archive\ import\ library*) # definitely import
+ win32_libid_type="x86 archive import"
+ ;;
+ *ar\ archive*) # could be an import, or static
+ # Keep the egrep pattern in sync with the one in _LT_CHECK_MAGIC_METHOD.
+ if eval $OBJDUMP -f $1 | $SED -e '10q' 2>/dev/null |
+ $EGREP 'file format (pei*-i386(.*architecture: i386)?|pe-arm-wince|pe-x86-64)' >/dev/null; then
+ func_to_tool_file "$1" func_convert_file_msys_to_w32
+ win32_nmres=`eval $NM -f posix -A \"$func_to_tool_file_result\" |
+ $SED -n -e '
+ 1,100{
+ / I /{
+ s,.*,import,
+ p
+ q
+ }
+ }'`
+ case $win32_nmres in
+ import*) win32_libid_type="x86 archive import";;
+ *) win32_libid_type="x86 archive static";;
+ esac
+ fi
+ ;;
+ *DLL*)
+ win32_libid_type="x86 DLL"
+ ;;
+ *executable*) # but shell scripts are "executable" too...
+ case $win32_fileres in
+ *MS\ Windows\ PE\ Intel*)
+ win32_libid_type="x86 DLL"
+ ;;
+ esac
+ ;;
+ esac
+ $ECHO "$win32_libid_type"
+}
+
+# func_cygming_dll_for_implib ARG
+#
+# Platform-specific function to extract the
+# name of the DLL associated with the specified
+# import library ARG.
+# Invoked by eval'ing the libtool variable
+# $sharedlib_from_linklib_cmd
+# Result is available in the variable
+# $sharedlib_from_linklib_result
+func_cygming_dll_for_implib ()
+{
+ $opt_debug
+ sharedlib_from_linklib_result=`$DLLTOOL --identify-strict --identify "$1"`
+}
+
+# func_cygming_dll_for_implib_fallback_core SECTION_NAME LIBNAMEs
+#
+# The is the core of a fallback implementation of a
+# platform-specific function to extract the name of the
+# DLL associated with the specified import library LIBNAME.
+#
+# SECTION_NAME is either .idata$6 or .idata$7, depending
+# on the platform and compiler that created the implib.
+#
+# Echos the name of the DLL associated with the
+# specified import library.
+func_cygming_dll_for_implib_fallback_core ()
+{
+ $opt_debug
+ match_literal=`$ECHO "$1" | $SED "$sed_make_literal_regex"`
+ $OBJDUMP -s --section "$1" "$2" 2>/dev/null |
+ $SED '/^Contents of section '"$match_literal"':/{
+ # Place marker at beginning of archive member dllname section
+ s/.*/====MARK====/
+ p
+ d
+ }
+ # These lines can sometimes be longer than 43 characters, but
+ # are always uninteresting
+ /:[ ]*file format pe[i]\{,1\}-/d
+ /^In archive [^:]*:/d
+ # Ensure marker is printed
+ /^====MARK====/p
+ # Remove all lines with less than 43 characters
+ /^.\{43\}/!d
+ # From remaining lines, remove first 43 characters
+ s/^.\{43\}//' |
+ $SED -n '
+ # Join marker and all lines until next marker into a single line
+ /^====MARK====/ b para
+ H
+ $ b para
+ b
+ :para
+ x
+ s/\n//g
+ # Remove the marker
+ s/^====MARK====//
+ # Remove trailing dots and whitespace
+ s/[\. \t]*$//
+ # Print
+ /./p' |
+ # we now have a list, one entry per line, of the stringified
+ # contents of the appropriate section of all members of the
+ # archive which possess that section. Heuristic: eliminate
+ # all those which have a first or second character that is
+ # a '.' (that is, objdump's representation of an unprintable
+ # character.) This should work for all archives with less than
+ # 0x302f exports -- but will fail for DLLs whose name actually
+ # begins with a literal '.' or a single character followed by
+ # a '.'.
+ #
+ # Of those that remain, print the first one.
+ $SED -e '/^\./d;/^.\./d;q'
+}
+
+# func_cygming_gnu_implib_p ARG
+# This predicate returns with zero status (TRUE) if
+# ARG is a GNU/binutils-style import library. Returns
+# with nonzero status (FALSE) otherwise.
+func_cygming_gnu_implib_p ()
+{
+ $opt_debug
+ func_to_tool_file "$1" func_convert_file_msys_to_w32
+ func_cygming_gnu_implib_tmp=`$NM "$func_to_tool_file_result" | eval "$global_symbol_pipe" | $EGREP ' (_head_[A-Za-z0-9_]+_[ad]l*|[A-Za-z0-9_]+_[ad]l*_iname)$'`
+ test -n "$func_cygming_gnu_implib_tmp"
+}
+
+# func_cygming_ms_implib_p ARG
+# This predicate returns with zero status (TRUE) if
+# ARG is an MS-style import library. Returns
+# with nonzero status (FALSE) otherwise.
+func_cygming_ms_implib_p ()
+{
+ $opt_debug
+ func_to_tool_file "$1" func_convert_file_msys_to_w32
+ func_cygming_ms_implib_tmp=`$NM "$func_to_tool_file_result" | eval "$global_symbol_pipe" | $GREP '_NULL_IMPORT_DESCRIPTOR'`
+ test -n "$func_cygming_ms_implib_tmp"
+}
+
+# func_cygming_dll_for_implib_fallback ARG
+# Platform-specific function to extract the
+# name of the DLL associated with the specified
+# import library ARG.
+#
+# This fallback implementation is for use when $DLLTOOL
+# does not support the --identify-strict option.
+# Invoked by eval'ing the libtool variable
+# $sharedlib_from_linklib_cmd
+# Result is available in the variable
+# $sharedlib_from_linklib_result
+func_cygming_dll_for_implib_fallback ()
+{
+ $opt_debug
+ if func_cygming_gnu_implib_p "$1" ; then
+ # binutils import library
+ sharedlib_from_linklib_result=`func_cygming_dll_for_implib_fallback_core '.idata$7' "$1"`
+ elif func_cygming_ms_implib_p "$1" ; then
+ # ms-generated import library
+ sharedlib_from_linklib_result=`func_cygming_dll_for_implib_fallback_core '.idata$6' "$1"`
+ else
+ # unknown
+ sharedlib_from_linklib_result=""
+ fi
+}
+
+
+# func_extract_an_archive dir oldlib
+func_extract_an_archive ()
+{
+ $opt_debug
+ f_ex_an_ar_dir="$1"; shift
+ f_ex_an_ar_oldlib="$1"
+ if test "$lock_old_archive_extraction" = yes; then
+ lockfile=$f_ex_an_ar_oldlib.lock
+ until $opt_dry_run || ln "$progpath" "$lockfile" 2>/dev/null; do
+ func_echo "Waiting for $lockfile to be removed"
+ sleep 2
+ done
+ fi
+ func_show_eval "(cd \$f_ex_an_ar_dir && $AR x \"\$f_ex_an_ar_oldlib\")" \
+ 'stat=$?; rm -f "$lockfile"; exit $stat'
+ if test "$lock_old_archive_extraction" = yes; then
+ $opt_dry_run || rm -f "$lockfile"
+ fi
+ if ($AR t "$f_ex_an_ar_oldlib" | sort | sort -uc >/dev/null 2>&1); then
+ :
+ else
+ func_fatal_error "object name conflicts in archive: $f_ex_an_ar_dir/$f_ex_an_ar_oldlib"
+ fi
+}
+
+
+# func_extract_archives gentop oldlib ...
+func_extract_archives ()
+{
+ $opt_debug
+ my_gentop="$1"; shift
+ my_oldlibs=${1+"$@"}
+ my_oldobjs=""
+ my_xlib=""
+ my_xabs=""
+ my_xdir=""
+
+ for my_xlib in $my_oldlibs; do
+ # Extract the objects.
+ case $my_xlib in
+ [\\/]* | [A-Za-z]:[\\/]*) my_xabs="$my_xlib" ;;
+ *) my_xabs=`pwd`"/$my_xlib" ;;
+ esac
+ func_basename "$my_xlib"
+ my_xlib="$func_basename_result"
+ my_xlib_u=$my_xlib
+ while :; do
+ case " $extracted_archives " in
+ *" $my_xlib_u "*)
+ func_arith $extracted_serial + 1
+ extracted_serial=$func_arith_result
+ my_xlib_u=lt$extracted_serial-$my_xlib ;;
+ *) break ;;
+ esac
+ done
+ extracted_archives="$extracted_archives $my_xlib_u"
+ my_xdir="$my_gentop/$my_xlib_u"
+
+ func_mkdir_p "$my_xdir"
+
+ case $host in
+ *-darwin*)
+ func_verbose "Extracting $my_xabs"
+ # Do not bother doing anything if just a dry run
+ $opt_dry_run || {
+ darwin_orig_dir=`pwd`
+ cd $my_xdir || exit $?
+ darwin_archive=$my_xabs
+ darwin_curdir=`pwd`
+ darwin_base_archive=`basename "$darwin_archive"`
+ darwin_arches=`$LIPO -info "$darwin_archive" 2>/dev/null | $GREP Architectures 2>/dev/null || true`
+ if test -n "$darwin_arches"; then
+ darwin_arches=`$ECHO "$darwin_arches" | $SED -e 's/.*are://'`
+ darwin_arch=
+ func_verbose "$darwin_base_archive has multiple architectures $darwin_arches"
+ for darwin_arch in $darwin_arches ; do
+ func_mkdir_p "unfat-$$/${darwin_base_archive}-${darwin_arch}"
+ $LIPO -thin $darwin_arch -output "unfat-$$/${darwin_base_archive}-${darwin_arch}/${darwin_base_archive}" "${darwin_archive}"
+ cd "unfat-$$/${darwin_base_archive}-${darwin_arch}"
+ func_extract_an_archive "`pwd`" "${darwin_base_archive}"
+ cd "$darwin_curdir"
+ $RM "unfat-$$/${darwin_base_archive}-${darwin_arch}/${darwin_base_archive}"
+ done # $darwin_arches
+ ## Okay now we've a bunch of thin objects, gotta fatten them up :)
+ darwin_filelist=`find unfat-$$ -type f -name \*.o -print -o -name \*.lo -print | $SED -e "$basename" | sort -u`
+ darwin_file=
+ darwin_files=
+ for darwin_file in $darwin_filelist; do
+ darwin_files=`find unfat-$$ -name $darwin_file -print | sort | $NL2SP`
+ $LIPO -create -output "$darwin_file" $darwin_files
+ done # $darwin_filelist
+ $RM -rf unfat-$$
+ cd "$darwin_orig_dir"
+ else
+ cd $darwin_orig_dir
+ func_extract_an_archive "$my_xdir" "$my_xabs"
+ fi # $darwin_arches
+ } # !$opt_dry_run
+ ;;
+ *)
+ func_extract_an_archive "$my_xdir" "$my_xabs"
+ ;;
+ esac
+ my_oldobjs="$my_oldobjs "`find $my_xdir -name \*.$objext -print -o -name \*.lo -print | sort | $NL2SP`
+ done
+
+ func_extract_archives_result="$my_oldobjs"
+}
+
+
+# func_emit_wrapper [arg=no]
+#
+# Emit a libtool wrapper script on stdout.
+# Don't directly open a file because we may want to
+# incorporate the script contents within a cygwin/mingw
+# wrapper executable. Must ONLY be called from within
+# func_mode_link because it depends on a number of variables
+# set therein.
+#
+# ARG is the value that the WRAPPER_SCRIPT_BELONGS_IN_OBJDIR
+# variable will take. If 'yes', then the emitted script
+# will assume that the directory in which it is stored is
+# the $objdir directory. This is a cygwin/mingw-specific
+# behavior.
+func_emit_wrapper ()
+{
+ func_emit_wrapper_arg1=${1-no}
+
+ $ECHO "\
+#! $SHELL
+
+# $output - temporary wrapper script for $objdir/$outputname
+# Generated by $PROGRAM (GNU $PACKAGE$TIMESTAMP) $VERSION
+#
+# The $output program cannot be directly executed until all the libtool
+# libraries that it depends on are installed.
+#
+# This wrapper script should never be moved out of the build directory.
+# If it is, it will not operate correctly.
+
+# Sed substitution that helps us do robust quoting. It backslashifies
+# metacharacters that are still active within double-quoted strings.
+sed_quote_subst='$sed_quote_subst'
+
+# Be Bourne compatible
+if test -n \"\${ZSH_VERSION+set}\" && (emulate sh) >/dev/null 2>&1; then
+ emulate sh
+ NULLCMD=:
+ # Zsh 3.x and 4.x performs word splitting on \${1+\"\$@\"}, which
+ # is contrary to our usage. Disable this feature.
+ alias -g '\${1+\"\$@\"}'='\"\$@\"'
+ setopt NO_GLOB_SUBST
+else
+ case \`(set -o) 2>/dev/null\` in *posix*) set -o posix;; esac
+fi
+BIN_SH=xpg4; export BIN_SH # for Tru64
+DUALCASE=1; export DUALCASE # for MKS sh
+
+# The HP-UX ksh and POSIX shell print the target directory to stdout
+# if CDPATH is set.
+(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
+
+relink_command=\"$relink_command\"
+
+# This environment variable determines our operation mode.
+if test \"\$libtool_install_magic\" = \"$magic\"; then
+ # install mode needs the following variables:
+ generated_by_libtool_version='$macro_version'
+ notinst_deplibs='$notinst_deplibs'
+else
+ # When we are sourced in execute mode, \$file and \$ECHO are already set.
+ if test \"\$libtool_execute_magic\" != \"$magic\"; then
+ file=\"\$0\""
+
+ qECHO=`$ECHO "$ECHO" | $SED "$sed_quote_subst"`
+ $ECHO "\
+
+# A function that is used when there is no print builtin or printf.
+func_fallback_echo ()
+{
+ eval 'cat <<_LTECHO_EOF
+\$1
+_LTECHO_EOF'
+}
+ ECHO=\"$qECHO\"
+ fi
+
+# Very basic option parsing. These options are (a) specific to
+# the libtool wrapper, (b) are identical between the wrapper
+# /script/ and the wrapper /executable/ which is used only on
+# windows platforms, and (c) all begin with the string "--lt-"
+# (application programs are unlikely to have options which match
+# this pattern).
+#
+# There are only two supported options: --lt-debug and
+# --lt-dump-script. There is, deliberately, no --lt-help.
+#
+# The first argument to this parsing function should be the
+# script's $0 value, followed by "$@".
+lt_option_debug=
+func_parse_lt_options ()
+{
+ lt_script_arg0=\$0
+ shift
+ for lt_opt
+ do
+ case \"\$lt_opt\" in
+ --lt-debug) lt_option_debug=1 ;;
+ --lt-dump-script)
+ lt_dump_D=\`\$ECHO \"X\$lt_script_arg0\" | $SED -e 's/^X//' -e 's%/[^/]*$%%'\`
+ test \"X\$lt_dump_D\" = \"X\$lt_script_arg0\" && lt_dump_D=.
+ lt_dump_F=\`\$ECHO \"X\$lt_script_arg0\" | $SED -e 's/^X//' -e 's%^.*/%%'\`
+ cat \"\$lt_dump_D/\$lt_dump_F\"
+ exit 0
+ ;;
+ --lt-*)
+ \$ECHO \"Unrecognized --lt- option: '\$lt_opt'\" 1>&2
+ exit 1
+ ;;
+ esac
+ done
+
+ # Print the debug banner immediately:
+ if test -n \"\$lt_option_debug\"; then
+ echo \"${outputname}:${output}:\${LINENO}: libtool wrapper (GNU $PACKAGE$TIMESTAMP) $VERSION\" 1>&2
+ fi
+}
+
+# Used when --lt-debug. Prints its arguments to stdout
+# (redirection is the responsibility of the caller)
+func_lt_dump_args ()
+{
+ lt_dump_args_N=1;
+ for lt_arg
+ do
+ \$ECHO \"${outputname}:${output}:\${LINENO}: newargv[\$lt_dump_args_N]: \$lt_arg\"
+ lt_dump_args_N=\`expr \$lt_dump_args_N + 1\`
+ done
+}
+
+# Core function for launching the target application
+func_exec_program_core ()
+{
+"
+ case $host in
+ # Backslashes separate directories on plain windows
+ *-*-mingw | *-*-os2* | *-cegcc*)
+ $ECHO "\
+ if test -n \"\$lt_option_debug\"; then
+ \$ECHO \"${outputname}:${output}:\${LINENO}: newargv[0]: \$progdir\\\\\$program\" 1>&2
+ func_lt_dump_args \${1+\"\$@\"} 1>&2
+ fi
+ exec \"\$progdir\\\\\$program\" \${1+\"\$@\"}
+"
+ ;;
+
+ *)
+ $ECHO "\
+ if test -n \"\$lt_option_debug\"; then
+ \$ECHO \"${outputname}:${output}:\${LINENO}: newargv[0]: \$progdir/\$program\" 1>&2
+ func_lt_dump_args \${1+\"\$@\"} 1>&2
+ fi
+ exec \"\$progdir/\$program\" \${1+\"\$@\"}
+"
+ ;;
+ esac
+ $ECHO "\
+ \$ECHO \"\$0: cannot exec \$program \$*\" 1>&2
+ exit 1
+}
+
+# A function to encapsulate launching the target application
+# Strips options in the --lt-* namespace from \$@ and
+# launches target application with the remaining arguments.
+func_exec_program ()
+{
+ for lt_wr_arg
+ do
+ case \$lt_wr_arg in
+ --lt-*) ;;
+ *) set x \"\$@\" \"\$lt_wr_arg\"; shift;;
+ esac
+ shift
+ done
+ func_exec_program_core \${1+\"\$@\"}
+}
+
+ # Parse options
+ func_parse_lt_options \"\$0\" \${1+\"\$@\"}
+
+ # Find the directory that this script lives in.
+ thisdir=\`\$ECHO \"\$file\" | $SED 's%/[^/]*$%%'\`
+ test \"x\$thisdir\" = \"x\$file\" && thisdir=.
+
+ # Follow symbolic links until we get to the real thisdir.
+ file=\`ls -ld \"\$file\" | $SED -n 's/.*-> //p'\`
+ while test -n \"\$file\"; do
+ destdir=\`\$ECHO \"\$file\" | $SED 's%/[^/]*\$%%'\`
+
+ # If there was a directory component, then change thisdir.
+ if test \"x\$destdir\" != \"x\$file\"; then
+ case \"\$destdir\" in
+ [\\\\/]* | [A-Za-z]:[\\\\/]*) thisdir=\"\$destdir\" ;;
+ *) thisdir=\"\$thisdir/\$destdir\" ;;
+ esac
+ fi
+
+ file=\`\$ECHO \"\$file\" | $SED 's%^.*/%%'\`
+ file=\`ls -ld \"\$thisdir/\$file\" | $SED -n 's/.*-> //p'\`
+ done
+
+ # Usually 'no', except on cygwin/mingw when embedded into
+ # the cwrapper.
+ WRAPPER_SCRIPT_BELONGS_IN_OBJDIR=$func_emit_wrapper_arg1
+ if test \"\$WRAPPER_SCRIPT_BELONGS_IN_OBJDIR\" = \"yes\"; then
+ # special case for '.'
+ if test \"\$thisdir\" = \".\"; then
+ thisdir=\`pwd\`
+ fi
+ # remove .libs from thisdir
+ case \"\$thisdir\" in
+ *[\\\\/]$objdir ) thisdir=\`\$ECHO \"\$thisdir\" | $SED 's%[\\\\/][^\\\\/]*$%%'\` ;;
+ $objdir ) thisdir=. ;;
+ esac
+ fi
+
+ # Try to get the absolute directory name.
+ absdir=\`cd \"\$thisdir\" && pwd\`
+ test -n \"\$absdir\" && thisdir=\"\$absdir\"
+"
+
+ if test "$fast_install" = yes; then
+ $ECHO "\
+ program=lt-'$outputname'$exeext
+ progdir=\"\$thisdir/$objdir\"
+
+ if test ! -f \"\$progdir/\$program\" ||
+ { file=\`ls -1dt \"\$progdir/\$program\" \"\$progdir/../\$program\" 2>/dev/null | ${SED} 1q\`; \\
+ test \"X\$file\" != \"X\$progdir/\$program\"; }; then
+
+ file=\"\$\$-\$program\"
+
+ if test ! -d \"\$progdir\"; then
+ $MKDIR \"\$progdir\"
+ else
+ $RM \"\$progdir/\$file\"
+ fi"
+
+ $ECHO "\
+
+ # relink executable if necessary
+ if test -n \"\$relink_command\"; then
+ if relink_command_output=\`eval \$relink_command 2>&1\`; then :
+ else
+ $ECHO \"\$relink_command_output\" >&2
+ $RM \"\$progdir/\$file\"
+ exit 1
+ fi
+ fi
+
+ $MV \"\$progdir/\$file\" \"\$progdir/\$program\" 2>/dev/null ||
+ { $RM \"\$progdir/\$program\";
+ $MV \"\$progdir/\$file\" \"\$progdir/\$program\"; }
+ $RM \"\$progdir/\$file\"
+ fi"
+ else
+ $ECHO "\
+ program='$outputname'
+ progdir=\"\$thisdir/$objdir\"
+"
+ fi
+
+ $ECHO "\
+
+ if test -f \"\$progdir/\$program\"; then"
+
+ # fixup the dll searchpath if we need to.
+ #
+ # Fix the DLL searchpath if we need to. Do this before prepending
+ # to shlibpath, because on Windows, both are PATH and uninstalled
+ # libraries must come first.
+ if test -n "$dllsearchpath"; then
+ $ECHO "\
+ # Add the dll search path components to the executable PATH
+ PATH=$dllsearchpath:\$PATH
+"
+ fi
+
+ # Export our shlibpath_var if we have one.
+ if test "$shlibpath_overrides_runpath" = yes && test -n "$shlibpath_var" && test -n "$temp_rpath"; then
+ $ECHO "\
+ # Add our own library path to $shlibpath_var
+ $shlibpath_var=\"$temp_rpath\$$shlibpath_var\"
+
+ # Some systems cannot cope with colon-terminated $shlibpath_var
+ # The second colon is a workaround for a bug in BeOS R4 sed
+ $shlibpath_var=\`\$ECHO \"\$$shlibpath_var\" | $SED 's/::*\$//'\`
+
+ export $shlibpath_var
+"
+ fi
+
+ $ECHO "\
+ if test \"\$libtool_execute_magic\" != \"$magic\"; then
+ # Run the actual program with our arguments.
+ func_exec_program \${1+\"\$@\"}
+ fi
+ else
+ # The program doesn't exist.
+ \$ECHO \"\$0: error: \\\`\$progdir/\$program' does not exist\" 1>&2
+ \$ECHO \"This script is just a wrapper for \$program.\" 1>&2
+ \$ECHO \"See the $PACKAGE documentation for more information.\" 1>&2
+ exit 1
+ fi
+fi\
+"
+}
+
+
+# func_emit_cwrapperexe_src
+# emit the source code for a wrapper executable on stdout
+# Must ONLY be called from within func_mode_link because
+# it depends on a number of variable set therein.
+func_emit_cwrapperexe_src ()
+{
+ cat <<EOF
+
+/* $cwrappersource - temporary wrapper executable for $objdir/$outputname
+ Generated by $PROGRAM (GNU $PACKAGE$TIMESTAMP) $VERSION
+
+ The $output program cannot be directly executed until all the libtool
+ libraries that it depends on are installed.
+
+ This wrapper executable should never be moved out of the build directory.
+ If it is, it will not operate correctly.
+*/
+EOF
+ cat <<"EOF"
+#ifdef _MSC_VER
+# define _CRT_SECURE_NO_DEPRECATE 1
+#endif
+#include <stdio.h>
+#include <stdlib.h>
+#ifdef _MSC_VER
+# include <direct.h>
+# include <process.h>
+# include <io.h>
+#else
+# include <unistd.h>
+# include <stdint.h>
+# ifdef __CYGWIN__
+# include <io.h>
+# endif
+#endif
+#include <malloc.h>
+#include <stdarg.h>
+#include <assert.h>
+#include <string.h>
+#include <ctype.h>
+#include <errno.h>
+#include <fcntl.h>
+#include <sys/stat.h>
+
+/* declarations of non-ANSI functions */
+#if defined(__MINGW32__)
+# ifdef __STRICT_ANSI__
+int _putenv (const char *);
+# endif
+#elif defined(__CYGWIN__)
+# ifdef __STRICT_ANSI__
+char *realpath (const char *, char *);
+int putenv (char *);
+int setenv (const char *, const char *, int);
+# endif
+/* #elif defined (other platforms) ... */
+#endif
+
+/* portability defines, excluding path handling macros */
+#if defined(_MSC_VER)
+# define setmode _setmode
+# define stat _stat
+# define chmod _chmod
+# define getcwd _getcwd
+# define putenv _putenv
+# define S_IXUSR _S_IEXEC
+# ifndef _INTPTR_T_DEFINED
+# define _INTPTR_T_DEFINED
+# define intptr_t int
+# endif
+#elif defined(__MINGW32__)
+# define setmode _setmode
+# define stat _stat
+# define chmod _chmod
+# define getcwd _getcwd
+# define putenv _putenv
+#elif defined(__CYGWIN__)
+# define HAVE_SETENV
+# define FOPEN_WB "wb"
+/* #elif defined (other platforms) ... */
+#endif
+
+#if defined(PATH_MAX)
+# define LT_PATHMAX PATH_MAX
+#elif defined(MAXPATHLEN)
+# define LT_PATHMAX MAXPATHLEN
+#else
+# define LT_PATHMAX 1024
+#endif
+
+#ifndef S_IXOTH
+# define S_IXOTH 0
+#endif
+#ifndef S_IXGRP
+# define S_IXGRP 0
+#endif
+
+/* path handling portability macros */
+#ifndef DIR_SEPARATOR
+# define DIR_SEPARATOR '/'
+# define PATH_SEPARATOR ':'
+#endif
+
+#if defined (_WIN32) || defined (__MSDOS__) || defined (__DJGPP__) || \
+ defined (__OS2__)
+# define HAVE_DOS_BASED_FILE_SYSTEM
+# define FOPEN_WB "wb"
+# ifndef DIR_SEPARATOR_2
+# define DIR_SEPARATOR_2 '\\'
+# endif
+# ifndef PATH_SEPARATOR_2
+# define PATH_SEPARATOR_2 ';'
+# endif
+#endif
+
+#ifndef DIR_SEPARATOR_2
+# define IS_DIR_SEPARATOR(ch) ((ch) == DIR_SEPARATOR)
+#else /* DIR_SEPARATOR_2 */
+# define IS_DIR_SEPARATOR(ch) \
+ (((ch) == DIR_SEPARATOR) || ((ch) == DIR_SEPARATOR_2))
+#endif /* DIR_SEPARATOR_2 */
+
+#ifndef PATH_SEPARATOR_2
+# define IS_PATH_SEPARATOR(ch) ((ch) == PATH_SEPARATOR)
+#else /* PATH_SEPARATOR_2 */
+# define IS_PATH_SEPARATOR(ch) ((ch) == PATH_SEPARATOR_2)
+#endif /* PATH_SEPARATOR_2 */
+
+#ifndef FOPEN_WB
+# define FOPEN_WB "w"
+#endif
+#ifndef _O_BINARY
+# define _O_BINARY 0
+#endif
+
+#define XMALLOC(type, num) ((type *) xmalloc ((num) * sizeof(type)))
+#define XFREE(stale) do { \
+ if (stale) { free ((void *) stale); stale = 0; } \
+} while (0)
+
+#if defined(LT_DEBUGWRAPPER)
+static int lt_debug = 1;
+#else
+static int lt_debug = 0;
+#endif
+
+const char *program_name = "libtool-wrapper"; /* in case xstrdup fails */
+
+void *xmalloc (size_t num);
+char *xstrdup (const char *string);
+const char *base_name (const char *name);
+char *find_executable (const char *wrapper);
+char *chase_symlinks (const char *pathspec);
+int make_executable (const char *path);
+int check_executable (const char *path);
+char *strendzap (char *str, const char *pat);
+void lt_debugprintf (const char *file, int line, const char *fmt, ...);
+void lt_fatal (const char *file, int line, const char *message, ...);
+static const char *nonnull (const char *s);
+static const char *nonempty (const char *s);
+void lt_setenv (const char *name, const char *value);
+char *lt_extend_str (const char *orig_value, const char *add, int to_end);
+void lt_update_exe_path (const char *name, const char *value);
+void lt_update_lib_path (const char *name, const char *value);
+char **prepare_spawn (char **argv);
+void lt_dump_script (FILE *f);
+EOF
+
+ cat <<EOF
+volatile const char * MAGIC_EXE = "$magic_exe";
+const char * LIB_PATH_VARNAME = "$shlibpath_var";
+EOF
+
+ if test "$shlibpath_overrides_runpath" = yes && test -n "$shlibpath_var" && test -n "$temp_rpath"; then
+ func_to_host_path "$temp_rpath"
+ cat <<EOF
+const char * LIB_PATH_VALUE = "$func_to_host_path_result";
+EOF
+ else
+ cat <<"EOF"
+const char * LIB_PATH_VALUE = "";
+EOF
+ fi
+
+ if test -n "$dllsearchpath"; then
+ func_to_host_path "$dllsearchpath:"
+ cat <<EOF
+const char * EXE_PATH_VARNAME = "PATH";
+const char * EXE_PATH_VALUE = "$func_to_host_path_result";
+EOF
+ else
+ cat <<"EOF"
+const char * EXE_PATH_VARNAME = "";
+const char * EXE_PATH_VALUE = "";
+EOF
+ fi
+
+ if test "$fast_install" = yes; then
+ cat <<EOF
+const char * TARGET_PROGRAM_NAME = "lt-$outputname"; /* hopefully, no .exe */
+EOF
+ else
+ cat <<EOF
+const char * TARGET_PROGRAM_NAME = "$outputname"; /* hopefully, no .exe */
+EOF
+ fi
+
+
+ cat <<"EOF"
+
+#define LTWRAPPER_OPTION_PREFIX "--lt-"
+
+static const char *ltwrapper_option_prefix = LTWRAPPER_OPTION_PREFIX;
+static const char *dumpscript_opt = LTWRAPPER_OPTION_PREFIX "dump-script";
+static const char *debug_opt = LTWRAPPER_OPTION_PREFIX "debug";
+
+int
+main (int argc, char *argv[])
+{
+ char **newargz;
+ int newargc;
+ char *tmp_pathspec;
+ char *actual_cwrapper_path;
+ char *actual_cwrapper_name;
+ char *target_name;
+ char *lt_argv_zero;
+ intptr_t rval = 127;
+
+ int i;
+
+ program_name = (char *) xstrdup (base_name (argv[0]));
+ newargz = XMALLOC (char *, argc + 1);
+
+ /* very simple arg parsing; don't want to rely on getopt
+ * also, copy all non cwrapper options to newargz, except
+ * argz[0], which is handled differently
+ */
+ newargc=0;
+ for (i = 1; i < argc; i++)
+ {
+ if (strcmp (argv[i], dumpscript_opt) == 0)
+ {
+EOF
+ case "$host" in
+ *mingw* | *cygwin* )
+ # make stdout use "unix" line endings
+ echo " setmode(1,_O_BINARY);"
+ ;;
+ esac
+
+ cat <<"EOF"
+ lt_dump_script (stdout);
+ return 0;
+ }
+ if (strcmp (argv[i], debug_opt) == 0)
+ {
+ lt_debug = 1;
+ continue;
+ }
+ if (strcmp (argv[i], ltwrapper_option_prefix) == 0)
+ {
+ /* however, if there is an option in the LTWRAPPER_OPTION_PREFIX
+ namespace, but it is not one of the ones we know about and
+ have already dealt with, above (inluding dump-script), then
+ report an error. Otherwise, targets might begin to believe
+ they are allowed to use options in the LTWRAPPER_OPTION_PREFIX
+ namespace. The first time any user complains about this, we'll
+ need to make LTWRAPPER_OPTION_PREFIX a configure-time option
+ or a configure.ac-settable value.
+ */
+ lt_fatal (__FILE__, __LINE__,
+ "unrecognized %s option: '%s'",
+ ltwrapper_option_prefix, argv[i]);
+ }
+ /* otherwise ... */
+ newargz[++newargc] = xstrdup (argv[i]);
+ }
+ newargz[++newargc] = NULL;
+
+EOF
+ cat <<EOF
+ /* The GNU banner must be the first non-error debug message */
+ lt_debugprintf (__FILE__, __LINE__, "libtool wrapper (GNU $PACKAGE$TIMESTAMP) $VERSION\n");
+EOF
+ cat <<"EOF"
+ lt_debugprintf (__FILE__, __LINE__, "(main) argv[0]: %s\n", argv[0]);
+ lt_debugprintf (__FILE__, __LINE__, "(main) program_name: %s\n", program_name);
+
+ tmp_pathspec = find_executable (argv[0]);
+ if (tmp_pathspec == NULL)
+ lt_fatal (__FILE__, __LINE__, "couldn't find %s", argv[0]);
+ lt_debugprintf (__FILE__, __LINE__,
+ "(main) found exe (before symlink chase) at: %s\n",
+ tmp_pathspec);
+
+ actual_cwrapper_path = chase_symlinks (tmp_pathspec);
+ lt_debugprintf (__FILE__, __LINE__,
+ "(main) found exe (after symlink chase) at: %s\n",
+ actual_cwrapper_path);
+ XFREE (tmp_pathspec);
+
+ actual_cwrapper_name = xstrdup (base_name (actual_cwrapper_path));
+ strendzap (actual_cwrapper_path, actual_cwrapper_name);
+
+ /* wrapper name transforms */
+ strendzap (actual_cwrapper_name, ".exe");
+ tmp_pathspec = lt_extend_str (actual_cwrapper_name, ".exe", 1);
+ XFREE (actual_cwrapper_name);
+ actual_cwrapper_name = tmp_pathspec;
+ tmp_pathspec = 0;
+
+ /* target_name transforms -- use actual target program name; might have lt- prefix */
+ target_name = xstrdup (base_name (TARGET_PROGRAM_NAME));
+ strendzap (target_name, ".exe");
+ tmp_pathspec = lt_extend_str (target_name, ".exe", 1);
+ XFREE (target_name);
+ target_name = tmp_pathspec;
+ tmp_pathspec = 0;
+
+ lt_debugprintf (__FILE__, __LINE__,
+ "(main) libtool target name: %s\n",
+ target_name);
+EOF
+
+ cat <<EOF
+ newargz[0] =
+ XMALLOC (char, (strlen (actual_cwrapper_path) +
+ strlen ("$objdir") + 1 + strlen (actual_cwrapper_name) + 1));
+ strcpy (newargz[0], actual_cwrapper_path);
+ strcat (newargz[0], "$objdir");
+ strcat (newargz[0], "/");
+EOF
+
+ cat <<"EOF"
+ /* stop here, and copy so we don't have to do this twice */
+ tmp_pathspec = xstrdup (newargz[0]);
+
+ /* do NOT want the lt- prefix here, so use actual_cwrapper_name */
+ strcat (newargz[0], actual_cwrapper_name);
+
+ /* DO want the lt- prefix here if it exists, so use target_name */
+ lt_argv_zero = lt_extend_str (tmp_pathspec, target_name, 1);
+ XFREE (tmp_pathspec);
+ tmp_pathspec = NULL;
+EOF
+
+ case $host_os in
+ mingw*)
+ cat <<"EOF"
+ {
+ char* p;
+ while ((p = strchr (newargz[0], '\\')) != NULL)
+ {
+ *p = '/';
+ }
+ while ((p = strchr (lt_argv_zero, '\\')) != NULL)
+ {
+ *p = '/';
+ }
+ }
+EOF
+ ;;
+ esac
+
+ cat <<"EOF"
+ XFREE (target_name);
+ XFREE (actual_cwrapper_path);
+ XFREE (actual_cwrapper_name);
+
+ lt_setenv ("BIN_SH", "xpg4"); /* for Tru64 */
+ lt_setenv ("DUALCASE", "1"); /* for MSK sh */
+ /* Update the DLL searchpath. EXE_PATH_VALUE ($dllsearchpath) must
+ be prepended before (that is, appear after) LIB_PATH_VALUE ($temp_rpath)
+ because on Windows, both *_VARNAMEs are PATH but uninstalled
+ libraries must come first. */
+ lt_update_exe_path (EXE_PATH_VARNAME, EXE_PATH_VALUE);
+ lt_update_lib_path (LIB_PATH_VARNAME, LIB_PATH_VALUE);
+
+ lt_debugprintf (__FILE__, __LINE__, "(main) lt_argv_zero: %s\n",
+ nonnull (lt_argv_zero));
+ for (i = 0; i < newargc; i++)
+ {
+ lt_debugprintf (__FILE__, __LINE__, "(main) newargz[%d]: %s\n",
+ i, nonnull (newargz[i]));
+ }
+
+EOF
+
+ case $host_os in
+ mingw*)
+ cat <<"EOF"
+ /* execv doesn't actually work on mingw as expected on unix */
+ newargz = prepare_spawn (newargz);
+ rval = _spawnv (_P_WAIT, lt_argv_zero, (const char * const *) newargz);
+ if (rval == -1)
+ {
+ /* failed to start process */
+ lt_debugprintf (__FILE__, __LINE__,
+ "(main) failed to launch target \"%s\": %s\n",
+ lt_argv_zero, nonnull (strerror (errno)));
+ return 127;
+ }
+ return rval;
+EOF
+ ;;
+ *)
+ cat <<"EOF"
+ execv (lt_argv_zero, newargz);
+ return rval; /* =127, but avoids unused variable warning */
+EOF
+ ;;
+ esac
+
+ cat <<"EOF"
+}
+
+void *
+xmalloc (size_t num)
+{
+ void *p = (void *) malloc (num);
+ if (!p)
+ lt_fatal (__FILE__, __LINE__, "memory exhausted");
+
+ return p;
+}
+
+char *
+xstrdup (const char *string)
+{
+ return string ? strcpy ((char *) xmalloc (strlen (string) + 1),
+ string) : NULL;
+}
+
+const char *
+base_name (const char *name)
+{
+ const char *base;
+
+#if defined (HAVE_DOS_BASED_FILE_SYSTEM)
+ /* Skip over the disk name in MSDOS pathnames. */
+ if (isalpha ((unsigned char) name[0]) && name[1] == ':')
+ name += 2;
+#endif
+
+ for (base = name; *name; name++)
+ if (IS_DIR_SEPARATOR (*name))
+ base = name + 1;
+ return base;
+}
+
+int
+check_executable (const char *path)
+{
+ struct stat st;
+
+ lt_debugprintf (__FILE__, __LINE__, "(check_executable): %s\n",
+ nonempty (path));
+ if ((!path) || (!*path))
+ return 0;
+
+ if ((stat (path, &st) >= 0)
+ && (st.st_mode & (S_IXUSR | S_IXGRP | S_IXOTH)))
+ return 1;
+ else
+ return 0;
+}
+
+int
+make_executable (const char *path)
+{
+ int rval = 0;
+ struct stat st;
+
+ lt_debugprintf (__FILE__, __LINE__, "(make_executable): %s\n",
+ nonempty (path));
+ if ((!path) || (!*path))
+ return 0;
+
+ if (stat (path, &st) >= 0)
+ {
+ rval = chmod (path, st.st_mode | S_IXOTH | S_IXGRP | S_IXUSR);
+ }
+ return rval;
+}
+
+/* Searches for the full path of the wrapper. Returns
+ newly allocated full path name if found, NULL otherwise
+ Does not chase symlinks, even on platforms that support them.
+*/
+char *
+find_executable (const char *wrapper)
+{
+ int has_slash = 0;
+ const char *p;
+ const char *p_next;
+ /* static buffer for getcwd */
+ char tmp[LT_PATHMAX + 1];
+ int tmp_len;
+ char *concat_name;
+
+ lt_debugprintf (__FILE__, __LINE__, "(find_executable): %s\n",
+ nonempty (wrapper));
+
+ if ((wrapper == NULL) || (*wrapper == '\0'))
+ return NULL;
+
+ /* Absolute path? */
+#if defined (HAVE_DOS_BASED_FILE_SYSTEM)
+ if (isalpha ((unsigned char) wrapper[0]) && wrapper[1] == ':')
+ {
+ concat_name = xstrdup (wrapper);
+ if (check_executable (concat_name))
+ return concat_name;
+ XFREE (concat_name);
+ }
+ else
+ {
+#endif
+ if (IS_DIR_SEPARATOR (wrapper[0]))
+ {
+ concat_name = xstrdup (wrapper);
+ if (check_executable (concat_name))
+ return concat_name;
+ XFREE (concat_name);
+ }
+#if defined (HAVE_DOS_BASED_FILE_SYSTEM)
+ }
+#endif
+
+ for (p = wrapper; *p; p++)
+ if (*p == '/')
+ {
+ has_slash = 1;
+ break;
+ }
+ if (!has_slash)
+ {
+ /* no slashes; search PATH */
+ const char *path = getenv ("PATH");
+ if (path != NULL)
+ {
+ for (p = path; *p; p = p_next)
+ {
+ const char *q;
+ size_t p_len;
+ for (q = p; *q; q++)
+ if (IS_PATH_SEPARATOR (*q))
+ break;
+ p_len = q - p;
+ p_next = (*q == '\0' ? q : q + 1);
+ if (p_len == 0)
+ {
+ /* empty path: current directory */
+ if (getcwd (tmp, LT_PATHMAX) == NULL)
+ lt_fatal (__FILE__, __LINE__, "getcwd failed: %s",
+ nonnull (strerror (errno)));
+ tmp_len = strlen (tmp);
+ concat_name =
+ XMALLOC (char, tmp_len + 1 + strlen (wrapper) + 1);
+ memcpy (concat_name, tmp, tmp_len);
+ concat_name[tmp_len] = '/';
+ strcpy (concat_name + tmp_len + 1, wrapper);
+ }
+ else
+ {
+ concat_name =
+ XMALLOC (char, p_len + 1 + strlen (wrapper) + 1);
+ memcpy (concat_name, p, p_len);
+ concat_name[p_len] = '/';
+ strcpy (concat_name + p_len + 1, wrapper);
+ }
+ if (check_executable (concat_name))
+ return concat_name;
+ XFREE (concat_name);
+ }
+ }
+ /* not found in PATH; assume curdir */
+ }
+ /* Relative path | not found in path: prepend cwd */
+ if (getcwd (tmp, LT_PATHMAX) == NULL)
+ lt_fatal (__FILE__, __LINE__, "getcwd failed: %s",
+ nonnull (strerror (errno)));
+ tmp_len = strlen (tmp);
+ concat_name = XMALLOC (char, tmp_len + 1 + strlen (wrapper) + 1);
+ memcpy (concat_name, tmp, tmp_len);
+ concat_name[tmp_len] = '/';
+ strcpy (concat_name + tmp_len + 1, wrapper);
+
+ if (check_executable (concat_name))
+ return concat_name;
+ XFREE (concat_name);
+ return NULL;
+}
+
+char *
+chase_symlinks (const char *pathspec)
+{
+#ifndef S_ISLNK
+ return xstrdup (pathspec);
+#else
+ char buf[LT_PATHMAX];
+ struct stat s;
+ char *tmp_pathspec = xstrdup (pathspec);
+ char *p;
+ int has_symlinks = 0;
+ while (strlen (tmp_pathspec) && !has_symlinks)
+ {
+ lt_debugprintf (__FILE__, __LINE__,
+ "checking path component for symlinks: %s\n",
+ tmp_pathspec);
+ if (lstat (tmp_pathspec, &s) == 0)
+ {
+ if (S_ISLNK (s.st_mode) != 0)
+ {
+ has_symlinks = 1;
+ break;
+ }
+
+ /* search backwards for last DIR_SEPARATOR */
+ p = tmp_pathspec + strlen (tmp_pathspec) - 1;
+ while ((p > tmp_pathspec) && (!IS_DIR_SEPARATOR (*p)))
+ p--;
+ if ((p == tmp_pathspec) && (!IS_DIR_SEPARATOR (*p)))
+ {
+ /* no more DIR_SEPARATORS left */
+ break;
+ }
+ *p = '\0';
+ }
+ else
+ {
+ lt_fatal (__FILE__, __LINE__,
+ "error accessing file \"%s\": %s",
+ tmp_pathspec, nonnull (strerror (errno)));
+ }
+ }
+ XFREE (tmp_pathspec);
+
+ if (!has_symlinks)
+ {
+ return xstrdup (pathspec);
+ }
+
+ tmp_pathspec = realpath (pathspec, buf);
+ if (tmp_pathspec == 0)
+ {
+ lt_fatal (__FILE__, __LINE__,
+ "could not follow symlinks for %s", pathspec);
+ }
+ return xstrdup (tmp_pathspec);
+#endif
+}
+
+char *
+strendzap (char *str, const char *pat)
+{
+ size_t len, patlen;
+
+ assert (str != NULL);
+ assert (pat != NULL);
+
+ len = strlen (str);
+ patlen = strlen (pat);
+
+ if (patlen <= len)
+ {
+ str += len - patlen;
+ if (strcmp (str, pat) == 0)
+ *str = '\0';
+ }
+ return str;
+}
+
+void
+lt_debugprintf (const char *file, int line, const char *fmt, ...)
+{
+ va_list args;
+ if (lt_debug)
+ {
+ (void) fprintf (stderr, "%s:%s:%d: ", program_name, file, line);
+ va_start (args, fmt);
+ (void) vfprintf (stderr, fmt, args);
+ va_end (args);
+ }
+}
+
+static void
+lt_error_core (int exit_status, const char *file,
+ int line, const char *mode,
+ const char *message, va_list ap)
+{
+ fprintf (stderr, "%s:%s:%d: %s: ", program_name, file, line, mode);
+ vfprintf (stderr, message, ap);
+ fprintf (stderr, ".\n");
+
+ if (exit_status >= 0)
+ exit (exit_status);
+}
+
+void
+lt_fatal (const char *file, int line, const char *message, ...)
+{
+ va_list ap;
+ va_start (ap, message);
+ lt_error_core (EXIT_FAILURE, file, line, "FATAL", message, ap);
+ va_end (ap);
+}
+
+static const char *
+nonnull (const char *s)
+{
+ return s ? s : "(null)";
+}
+
+static const char *
+nonempty (const char *s)
+{
+ return (s && !*s) ? "(empty)" : nonnull (s);
+}
+
+void
+lt_setenv (const char *name, const char *value)
+{
+ lt_debugprintf (__FILE__, __LINE__,
+ "(lt_setenv) setting '%s' to '%s'\n",
+ nonnull (name), nonnull (value));
+ {
+#ifdef HAVE_SETENV
+ /* always make a copy, for consistency with !HAVE_SETENV */
+ char *str = xstrdup (value);
+ setenv (name, str, 1);
+#else
+ int len = strlen (name) + 1 + strlen (value) + 1;
+ char *str = XMALLOC (char, len);
+ sprintf (str, "%s=%s", name, value);
+ if (putenv (str) != EXIT_SUCCESS)
+ {
+ XFREE (str);
+ }
+#endif
+ }
+}
+
+char *
+lt_extend_str (const char *orig_value, const char *add, int to_end)
+{
+ char *new_value;
+ if (orig_value && *orig_value)
+ {
+ int orig_value_len = strlen (orig_value);
+ int add_len = strlen (add);
+ new_value = XMALLOC (char, add_len + orig_value_len + 1);
+ if (to_end)
+ {
+ strcpy (new_value, orig_value);
+ strcpy (new_value + orig_value_len, add);
+ }
+ else
+ {
+ strcpy (new_value, add);
+ strcpy (new_value + add_len, orig_value);
+ }
+ }
+ else
+ {
+ new_value = xstrdup (add);
+ }
+ return new_value;
+}
+
+void
+lt_update_exe_path (const char *name, const char *value)
+{
+ lt_debugprintf (__FILE__, __LINE__,
+ "(lt_update_exe_path) modifying '%s' by prepending '%s'\n",
+ nonnull (name), nonnull (value));
+
+ if (name && *name && value && *value)
+ {
+ char *new_value = lt_extend_str (getenv (name), value, 0);
+ /* some systems can't cope with a ':'-terminated path #' */
+ int len = strlen (new_value);
+ while (((len = strlen (new_value)) > 0) && IS_PATH_SEPARATOR (new_value[len-1]))
+ {
+ new_value[len-1] = '\0';
+ }
+ lt_setenv (name, new_value);
+ XFREE (new_value);
+ }
+}
+
+void
+lt_update_lib_path (const char *name, const char *value)
+{
+ lt_debugprintf (__FILE__, __LINE__,
+ "(lt_update_lib_path) modifying '%s' by prepending '%s'\n",
+ nonnull (name), nonnull (value));
+
+ if (name && *name && value && *value)
+ {
+ char *new_value = lt_extend_str (getenv (name), value, 0);
+ lt_setenv (name, new_value);
+ XFREE (new_value);
+ }
+}
+
+EOF
+ case $host_os in
+ mingw*)
+ cat <<"EOF"
+
+/* Prepares an argument vector before calling spawn().
+ Note that spawn() does not by itself call the command interpreter
+ (getenv ("COMSPEC") != NULL ? getenv ("COMSPEC") :
+ ({ OSVERSIONINFO v; v.dwOSVersionInfoSize = sizeof(OSVERSIONINFO);
+ GetVersionEx(&v);
+ v.dwPlatformId == VER_PLATFORM_WIN32_NT;
+ }) ? "cmd.exe" : "command.com").
+ Instead it simply concatenates the arguments, separated by ' ', and calls
+ CreateProcess(). We must quote the arguments since Win32 CreateProcess()
+ interprets characters like ' ', '\t', '\\', '"' (but not '<' and '>') in a
+ special way:
+ - Space and tab are interpreted as delimiters. They are not treated as
+ delimiters if they are surrounded by double quotes: "...".
+ - Unescaped double quotes are removed from the input. Their only effect is
+ that within double quotes, space and tab are treated like normal
+ characters.
+ - Backslashes not followed by double quotes are not special.
+ - But 2*n+1 backslashes followed by a double quote become
+ n backslashes followed by a double quote (n >= 0):
+ \" -> "
+ \\\" -> \"
+ \\\\\" -> \\"
+ */
+#define SHELL_SPECIAL_CHARS "\"\\ \001\002\003\004\005\006\007\010\011\012\013\014\015\016\017\020\021\022\023\024\025\026\027\030\031\032\033\034\035\036\037"
+#define SHELL_SPACE_CHARS " \001\002\003\004\005\006\007\010\011\012\013\014\015\016\017\020\021\022\023\024\025\026\027\030\031\032\033\034\035\036\037"
+char **
+prepare_spawn (char **argv)
+{
+ size_t argc;
+ char **new_argv;
+ size_t i;
+
+ /* Count number of arguments. */
+ for (argc = 0; argv[argc] != NULL; argc++)
+ ;
+
+ /* Allocate new argument vector. */
+ new_argv = XMALLOC (char *, argc + 1);
+
+ /* Put quoted arguments into the new argument vector. */
+ for (i = 0; i < argc; i++)
+ {
+ const char *string = argv[i];
+
+ if (string[0] == '\0')
+ new_argv[i] = xstrdup ("\"\"");
+ else if (strpbrk (string, SHELL_SPECIAL_CHARS) != NULL)
+ {
+ int quote_around = (strpbrk (string, SHELL_SPACE_CHARS) != NULL);
+ size_t length;
+ unsigned int backslashes;
+ const char *s;
+ char *quoted_string;
+ char *p;
+
+ length = 0;
+ backslashes = 0;
+ if (quote_around)
+ length++;
+ for (s = string; *s != '\0'; s++)
+ {
+ char c = *s;
+ if (c == '"')
+ length += backslashes + 1;
+ length++;
+ if (c == '\\')
+ backslashes++;
+ else
+ backslashes = 0;
+ }
+ if (quote_around)
+ length += backslashes + 1;
+
+ quoted_string = XMALLOC (char, length + 1);
+
+ p = quoted_string;
+ backslashes = 0;
+ if (quote_around)
+ *p++ = '"';
+ for (s = string; *s != '\0'; s++)
+ {
+ char c = *s;
+ if (c == '"')
+ {
+ unsigned int j;
+ for (j = backslashes + 1; j > 0; j--)
+ *p++ = '\\';
+ }
+ *p++ = c;
+ if (c == '\\')
+ backslashes++;
+ else
+ backslashes = 0;
+ }
+ if (quote_around)
+ {
+ unsigned int j;
+ for (j = backslashes; j > 0; j--)
+ *p++ = '\\';
+ *p++ = '"';
+ }
+ *p = '\0';
+
+ new_argv[i] = quoted_string;
+ }
+ else
+ new_argv[i] = (char *) string;
+ }
+ new_argv[argc] = NULL;
+
+ return new_argv;
+}
+EOF
+ ;;
+ esac
+
+ cat <<"EOF"
+void lt_dump_script (FILE* f)
+{
+EOF
+ func_emit_wrapper yes |
+ $SED -e 's/\([\\"]\)/\\\1/g' \
+ -e 's/^/ fputs ("/' -e 's/$/\\n", f);/'
+
+ cat <<"EOF"
+}
+EOF
+}
+# end: func_emit_cwrapperexe_src
+
+# func_win32_import_lib_p ARG
+# True if ARG is an import lib, as indicated by $file_magic_cmd
+func_win32_import_lib_p ()
+{
+ $opt_debug
+ case `eval $file_magic_cmd \"\$1\" 2>/dev/null | $SED -e 10q` in
+ *import*) : ;;
+ *) false ;;
+ esac
+}
+
+# func_mode_link arg...
+func_mode_link ()
+{
+ $opt_debug
+ case $host in
+ *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-cegcc*)
+ # It is impossible to link a dll without this setting, and
+ # we shouldn't force the makefile maintainer to figure out
+ # which system we are compiling for in order to pass an extra
+ # flag for every libtool invocation.
+ # allow_undefined=no
+
+ # FIXME: Unfortunately, there are problems with the above when trying
+ # to make a dll which has undefined symbols, in which case not
+ # even a static library is built. For now, we need to specify
+ # -no-undefined on the libtool link line when we can be certain
+ # that all symbols are satisfied, otherwise we get a static library.
+ allow_undefined=yes
+ ;;
+ *)
+ allow_undefined=yes
+ ;;
+ esac
+ libtool_args=$nonopt
+ base_compile="$nonopt $@"
+ compile_command=$nonopt
+ finalize_command=$nonopt
+
+ compile_rpath=
+ finalize_rpath=
+ compile_shlibpath=
+ finalize_shlibpath=
+ convenience=
+ old_convenience=
+ deplibs=
+ old_deplibs=
+ compiler_flags=
+ linker_flags=
+ dllsearchpath=
+ lib_search_path=`pwd`
+ inst_prefix_dir=
+ new_inherited_linker_flags=
+
+ avoid_version=no
+ bindir=
+ dlfiles=
+ dlprefiles=
+ dlself=no
+ export_dynamic=no
+ export_symbols=
+ export_symbols_regex=
+ generated=
+ libobjs=
+ ltlibs=
+ module=no
+ no_install=no
+ objs=
+ non_pic_objects=
+ precious_files_regex=
+ prefer_static_libs=no
+ preload=no
+ prev=
+ prevarg=
+ release=
+ rpath=
+ xrpath=
+ perm_rpath=
+ temp_rpath=
+ thread_safe=no
+ vinfo=
+ vinfo_number=no
+ weak_libs=
+ single_module="${wl}-single_module"
+ func_infer_tag $base_compile
+
+ # We need to know -static, to get the right output filenames.
+ for arg
+ do
+ case $arg in
+ -shared)
+ test "$build_libtool_libs" != yes && \
+ func_fatal_configuration "can not build a shared library"
+ build_old_libs=no
+ break
+ ;;
+ -all-static | -static | -static-libtool-libs)
+ case $arg in
+ -all-static)
+ if test "$build_libtool_libs" = yes && test -z "$link_static_flag"; then
+ func_warning "complete static linking is impossible in this configuration"
+ fi
+ if test -n "$link_static_flag"; then
+ dlopen_self=$dlopen_self_static
+ fi
+ prefer_static_libs=yes
+ ;;
+ -static)
+ if test -z "$pic_flag" && test -n "$link_static_flag"; then
+ dlopen_self=$dlopen_self_static
+ fi
+ prefer_static_libs=built
+ ;;
+ -static-libtool-libs)
+ if test -z "$pic_flag" && test -n "$link_static_flag"; then
+ dlopen_self=$dlopen_self_static
+ fi
+ prefer_static_libs=yes
+ ;;
+ esac
+ build_libtool_libs=no
+ build_old_libs=yes
+ break
+ ;;
+ esac
+ done
+
+ # See if our shared archives depend on static archives.
+ test -n "$old_archive_from_new_cmds" && build_old_libs=yes
+
+ # Go through the arguments, transforming them on the way.
+ while test "$#" -gt 0; do
+ arg="$1"
+ shift
+ func_quote_for_eval "$arg"
+ qarg=$func_quote_for_eval_unquoted_result
+ func_append libtool_args " $func_quote_for_eval_result"
+
+ # If the previous option needs an argument, assign it.
+ if test -n "$prev"; then
+ case $prev in
+ output)
+ func_append compile_command " @OUTPUT@"
+ func_append finalize_command " @OUTPUT@"
+ ;;
+ esac
+
+ case $prev in
+ bindir)
+ bindir="$arg"
+ prev=
+ continue
+ ;;
+ dlfiles|dlprefiles)
+ if test "$preload" = no; then
+ # Add the symbol object into the linking commands.
+ func_append compile_command " @SYMFILE@"
+ func_append finalize_command " @SYMFILE@"
+ preload=yes
+ fi
+ case $arg in
+ *.la | *.lo) ;; # We handle these cases below.
+ force)
+ if test "$dlself" = no; then
+ dlself=needless
+ export_dynamic=yes
+ fi
+ prev=
+ continue
+ ;;
+ self)
+ if test "$prev" = dlprefiles; then
+ dlself=yes
+ elif test "$prev" = dlfiles && test "$dlopen_self" != yes; then
+ dlself=yes
+ else
+ dlself=needless
+ export_dynamic=yes
+ fi
+ prev=
+ continue
+ ;;
+ *)
+ if test "$prev" = dlfiles; then
+ func_append dlfiles " $arg"
+ else
+ func_append dlprefiles " $arg"
+ fi
+ prev=
+ continue
+ ;;
+ esac
+ ;;
+ expsyms)
+ export_symbols="$arg"
+ test -f "$arg" \
+ || func_fatal_error "symbol file \`$arg' does not exist"
+ prev=
+ continue
+ ;;
+ expsyms_regex)
+ export_symbols_regex="$arg"
+ prev=
+ continue
+ ;;
+ framework)
+ case $host in
+ *-*-darwin*)
+ case "$deplibs " in
+ *" $qarg.ltframework "*) ;;
+ *) func_append deplibs " $qarg.ltframework" # this is fixed later
+ ;;
+ esac
+ ;;
+ esac
+ prev=
+ continue
+ ;;
+ inst_prefix)
+ inst_prefix_dir="$arg"
+ prev=
+ continue
+ ;;
+ objectlist)
+ if test -f "$arg"; then
+ save_arg=$arg
+ moreargs=
+ for fil in `cat "$save_arg"`
+ do
+# func_append moreargs " $fil"
+ arg=$fil
+ # A libtool-controlled object.
+
+ # Check to see that this really is a libtool object.
+ if func_lalib_unsafe_p "$arg"; then
+ pic_object=
+ non_pic_object=
+
+ # Read the .lo file
+ func_source "$arg"
+
+ if test -z "$pic_object" ||
+ test -z "$non_pic_object" ||
+ test "$pic_object" = none &&
+ test "$non_pic_object" = none; then
+ func_fatal_error "cannot find name of object for \`$arg'"
+ fi
+
+ # Extract subdirectory from the argument.
+ func_dirname "$arg" "/" ""
+ xdir="$func_dirname_result"
+
+ if test "$pic_object" != none; then
+ # Prepend the subdirectory the object is found in.
+ pic_object="$xdir$pic_object"
+
+ if test "$prev" = dlfiles; then
+ if test "$build_libtool_libs" = yes && test "$dlopen_support" = yes; then
+ func_append dlfiles " $pic_object"
+ prev=
+ continue
+ else
+ # If libtool objects are unsupported, then we need to preload.
+ prev=dlprefiles
+ fi
+ fi
+
+ # CHECK ME: I think I busted this. -Ossama
+ if test "$prev" = dlprefiles; then
+ # Preload the old-style object.
+ func_append dlprefiles " $pic_object"
+ prev=
+ fi
+
+ # A PIC object.
+ func_append libobjs " $pic_object"
+ arg="$pic_object"
+ fi
+
+ # Non-PIC object.
+ if test "$non_pic_object" != none; then
+ # Prepend the subdirectory the object is found in.
+ non_pic_object="$xdir$non_pic_object"
+
+ # A standard non-PIC object
+ func_append non_pic_objects " $non_pic_object"
+ if test -z "$pic_object" || test "$pic_object" = none ; then
+ arg="$non_pic_object"
+ fi
+ else
+ # If the PIC object exists, use it instead.
+ # $xdir was prepended to $pic_object above.
+ non_pic_object="$pic_object"
+ func_append non_pic_objects " $non_pic_object"
+ fi
+ else
+ # Only an error if not doing a dry-run.
+ if $opt_dry_run; then
+ # Extract subdirectory from the argument.
+ func_dirname "$arg" "/" ""
+ xdir="$func_dirname_result"
+
+ func_lo2o "$arg"
+ pic_object=$xdir$objdir/$func_lo2o_result
+ non_pic_object=$xdir$func_lo2o_result
+ func_append libobjs " $pic_object"
+ func_append non_pic_objects " $non_pic_object"
+ else
+ func_fatal_error "\`$arg' is not a valid libtool object"
+ fi
+ fi
+ done
+ else
+ func_fatal_error "link input file \`$arg' does not exist"
+ fi
+ arg=$save_arg
+ prev=
+ continue
+ ;;
+ precious_regex)
+ precious_files_regex="$arg"
+ prev=
+ continue
+ ;;
+ release)
+ release="-$arg"
+ prev=
+ continue
+ ;;
+ rpath | xrpath)
+ # We need an absolute path.
+ case $arg in
+ [\\/]* | [A-Za-z]:[\\/]*) ;;
+ *)
+ func_fatal_error "only absolute run-paths are allowed"
+ ;;
+ esac
+ if test "$prev" = rpath; then
+ case "$rpath " in
+ *" $arg "*) ;;
+ *) func_append rpath " $arg" ;;
+ esac
+ else
+ case "$xrpath " in
+ *" $arg "*) ;;
+ *) func_append xrpath " $arg" ;;
+ esac
+ fi
+ prev=
+ continue
+ ;;
+ shrext)
+ shrext_cmds="$arg"
+ prev=
+ continue
+ ;;
+ weak)
+ func_append weak_libs " $arg"
+ prev=
+ continue
+ ;;
+ xcclinker)
+ func_append linker_flags " $qarg"
+ func_append compiler_flags " $qarg"
+ prev=
+ func_append compile_command " $qarg"
+ func_append finalize_command " $qarg"
+ continue
+ ;;
+ xcompiler)
+ func_append compiler_flags " $qarg"
+ prev=
+ func_append compile_command " $qarg"
+ func_append finalize_command " $qarg"
+ continue
+ ;;
+ xlinker)
+ func_append linker_flags " $qarg"
+ func_append compiler_flags " $wl$qarg"
+ prev=
+ func_append compile_command " $wl$qarg"
+ func_append finalize_command " $wl$qarg"
+ continue
+ ;;
+ *)
+ eval "$prev=\"\$arg\""
+ prev=
+ continue
+ ;;
+ esac
+ fi # test -n "$prev"
+
+ prevarg="$arg"
+
+ case $arg in
+ -all-static)
+ if test -n "$link_static_flag"; then
+ # See comment for -static flag below, for more details.
+ func_append compile_command " $link_static_flag"
+ func_append finalize_command " $link_static_flag"
+ fi
+ continue
+ ;;
+
+ -allow-undefined)
+ # FIXME: remove this flag sometime in the future.
+ func_fatal_error "\`-allow-undefined' must not be used because it is the default"
+ ;;
+
+ -avoid-version)
+ avoid_version=yes
+ continue
+ ;;
+
+ -bindir)
+ prev=bindir
+ continue
+ ;;
+
+ -dlopen)
+ prev=dlfiles
+ continue
+ ;;
+
+ -dlpreopen)
+ prev=dlprefiles
+ continue
+ ;;
+
+ -export-dynamic)
+ export_dynamic=yes
+ continue
+ ;;
+
+ -export-symbols | -export-symbols-regex)
+ if test -n "$export_symbols" || test -n "$export_symbols_regex"; then
+ func_fatal_error "more than one -exported-symbols argument is not allowed"
+ fi
+ if test "X$arg" = "X-export-symbols"; then
+ prev=expsyms
+ else
+ prev=expsyms_regex
+ fi
+ continue
+ ;;
+
+ -framework)
+ prev=framework
+ continue
+ ;;
+
+ -inst-prefix-dir)
+ prev=inst_prefix
+ continue
+ ;;
+
+ # The native IRIX linker understands -LANG:*, -LIST:* and -LNO:*
+ # so, if we see these flags be careful not to treat them like -L
+ -L[A-Z][A-Z]*:*)
+ case $with_gcc/$host in
+ no/*-*-irix* | /*-*-irix*)
+ func_append compile_command " $arg"
+ func_append finalize_command " $arg"
+ ;;
+ esac
+ continue
+ ;;
+
+ -L*)
+ func_stripname "-L" '' "$arg"
+ if test -z "$func_stripname_result"; then
+ if test "$#" -gt 0; then
+ func_fatal_error "require no space between \`-L' and \`$1'"
+ else
+ func_fatal_error "need path for \`-L' option"
+ fi
+ fi
+ func_resolve_sysroot "$func_stripname_result"
+ dir=$func_resolve_sysroot_result
+ # We need an absolute path.
+ case $dir in
+ [\\/]* | [A-Za-z]:[\\/]*) ;;
+ *)
+ absdir=`cd "$dir" && pwd`
+ test -z "$absdir" && \
+ func_fatal_error "cannot determine absolute directory name of \`$dir'"
+ dir="$absdir"
+ ;;
+ esac
+ case "$deplibs " in
+ *" -L$dir "* | *" $arg "*)
+ # Will only happen for absolute or sysroot arguments
+ ;;
+ *)
+ # Preserve sysroot, but never include relative directories
+ case $dir in
+ [\\/]* | [A-Za-z]:[\\/]* | =*) func_append deplibs " $arg" ;;
+ *) func_append deplibs " -L$dir" ;;
+ esac
+ func_append lib_search_path " $dir"
+ ;;
+ esac
+ case $host in
+ *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-cegcc*)
+ testbindir=`$ECHO "$dir" | $SED 's*/lib$*/bin*'`
+ case :$dllsearchpath: in
+ *":$dir:"*) ;;
+ ::) dllsearchpath=$dir;;
+ *) func_append dllsearchpath ":$dir";;
+ esac
+ case :$dllsearchpath: in
+ *":$testbindir:"*) ;;
+ ::) dllsearchpath=$testbindir;;
+ *) func_append dllsearchpath ":$testbindir";;
+ esac
+ ;;
+ esac
+ continue
+ ;;
+
+ -l*)
+ if test "X$arg" = "X-lc" || test "X$arg" = "X-lm"; then
+ case $host in
+ *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-beos* | *-cegcc* | *-*-haiku*)
+ # These systems don't actually have a C or math library (as such)
+ continue
+ ;;
+ *-*-os2*)
+ # These systems don't actually have a C library (as such)
+ test "X$arg" = "X-lc" && continue
+ ;;
+ *-*-openbsd* | *-*-freebsd* | *-*-dragonfly*)
+ # Do not include libc due to us having libc/libc_r.
+ test "X$arg" = "X-lc" && continue
+ ;;
+ *-*-rhapsody* | *-*-darwin1.[012])
+ # Rhapsody C and math libraries are in the System framework
+ func_append deplibs " System.ltframework"
+ continue
+ ;;
+ *-*-sco3.2v5* | *-*-sco5v6*)
+ # Causes problems with __ctype
+ test "X$arg" = "X-lc" && continue
+ ;;
+ *-*-sysv4.2uw2* | *-*-sysv5* | *-*-unixware* | *-*-OpenUNIX*)
+ # Compiler inserts libc in the correct place for threads to work
+ test "X$arg" = "X-lc" && continue
+ ;;
+ esac
+ elif test "X$arg" = "X-lc_r"; then
+ case $host in
+ *-*-openbsd* | *-*-freebsd* | *-*-dragonfly*)
+ # Do not include libc_r directly, use -pthread flag.
+ continue
+ ;;
+ esac
+ fi
+ func_append deplibs " $arg"
+ continue
+ ;;
+
+ -module)
+ module=yes
+ continue
+ ;;
+
+ # Tru64 UNIX uses -model [arg] to determine the layout of C++
+ # classes, name mangling, and exception handling.
+ # Darwin uses the -arch flag to determine output architecture.
+ -model|-arch|-isysroot|--sysroot)
+ func_append compiler_flags " $arg"
+ func_append compile_command " $arg"
+ func_append finalize_command " $arg"
+ prev=xcompiler
+ continue
+ ;;
+
+ -mt|-mthreads|-kthread|-Kthread|-pthread|-pthreads|--thread-safe|-threads)
+ func_append compiler_flags " $arg"
+ func_append compile_command " $arg"
+ func_append finalize_command " $arg"
+ case "$new_inherited_linker_flags " in
+ *" $arg "*) ;;
+ * ) func_append new_inherited_linker_flags " $arg" ;;
+ esac
+ continue
+ ;;
+
+ -multi_module)
+ single_module="${wl}-multi_module"
+ continue
+ ;;
+
+ -no-fast-install)
+ fast_install=no
+ continue
+ ;;
+
+ -no-install)
+ case $host in
+ *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-*-darwin* | *-cegcc*)
+ # The PATH hackery in wrapper scripts is required on Windows
+ # and Darwin in order for the loader to find any dlls it needs.
+ func_warning "\`-no-install' is ignored for $host"
+ func_warning "assuming \`-no-fast-install' instead"
+ fast_install=no
+ ;;
+ *) no_install=yes ;;
+ esac
+ continue
+ ;;
+
+ -no-undefined)
+ allow_undefined=no
+ continue
+ ;;
+
+ -objectlist)
+ prev=objectlist
+ continue
+ ;;
+
+ -o) prev=output ;;
+
+ -precious-files-regex)
+ prev=precious_regex
+ continue
+ ;;
+
+ -release)
+ prev=release
+ continue
+ ;;
+
+ -rpath)
+ prev=rpath
+ continue
+ ;;
+
+ -R)
+ prev=xrpath
+ continue
+ ;;
+
+ -R*)
+ func_stripname '-R' '' "$arg"
+ dir=$func_stripname_result
+ # We need an absolute path.
+ case $dir in
+ [\\/]* | [A-Za-z]:[\\/]*) ;;
+ =*)
+ func_stripname '=' '' "$dir"
+ dir=$lt_sysroot$func_stripname_result
+ ;;
+ *)
+ func_fatal_error "only absolute run-paths are allowed"
+ ;;
+ esac
+ case "$xrpath " in
+ *" $dir "*) ;;
+ *) func_append xrpath " $dir" ;;
+ esac
+ continue
+ ;;
+
+ -shared)
+ # The effects of -shared are defined in a previous loop.
+ continue
+ ;;
+
+ -shrext)
+ prev=shrext
+ continue
+ ;;
+
+ -static | -static-libtool-libs)
+ # The effects of -static are defined in a previous loop.
+ # We used to do the same as -all-static on platforms that
+ # didn't have a PIC flag, but the assumption that the effects
+ # would be equivalent was wrong. It would break on at least
+ # Digital Unix and AIX.
+ continue
+ ;;
+
+ -thread-safe)
+ thread_safe=yes
+ continue
+ ;;
+
+ -version-info)
+ prev=vinfo
+ continue
+ ;;
+
+ -version-number)
+ prev=vinfo
+ vinfo_number=yes
+ continue
+ ;;
+
+ -weak)
+ prev=weak
+ continue
+ ;;
+
+ -Wc,*)
+ func_stripname '-Wc,' '' "$arg"
+ args=$func_stripname_result
+ arg=
+ save_ifs="$IFS"; IFS=','
+ for flag in $args; do
+ IFS="$save_ifs"
+ func_quote_for_eval "$flag"
+ func_append arg " $func_quote_for_eval_result"
+ func_append compiler_flags " $func_quote_for_eval_result"
+ done
+ IFS="$save_ifs"
+ func_stripname ' ' '' "$arg"
+ arg=$func_stripname_result
+ ;;
+
+ -Wl,*)
+ func_stripname '-Wl,' '' "$arg"
+ args=$func_stripname_result
+ arg=
+ save_ifs="$IFS"; IFS=','
+ for flag in $args; do
+ IFS="$save_ifs"
+ func_quote_for_eval "$flag"
+ func_append arg " $wl$func_quote_for_eval_result"
+ func_append compiler_flags " $wl$func_quote_for_eval_result"
+ func_append linker_flags " $func_quote_for_eval_result"
+ done
+ IFS="$save_ifs"
+ func_stripname ' ' '' "$arg"
+ arg=$func_stripname_result
+ ;;
+
+ -Xcompiler)
+ prev=xcompiler
+ continue
+ ;;
+
+ -Xlinker)
+ prev=xlinker
+ continue
+ ;;
+
+ -XCClinker)
+ prev=xcclinker
+ continue
+ ;;
+
+ # -msg_* for osf cc
+ -msg_*)
+ func_quote_for_eval "$arg"
+ arg="$func_quote_for_eval_result"
+ ;;
+
+ # Flags to be passed through unchanged, with rationale:
+ # -64, -mips[0-9] enable 64-bit mode for the SGI compiler
+ # -r[0-9][0-9]* specify processor for the SGI compiler
+ # -xarch=*, -xtarget=* enable 64-bit mode for the Sun compiler
+ # +DA*, +DD* enable 64-bit mode for the HP compiler
+ # -q* compiler args for the IBM compiler
+ # -m*, -t[45]*, -txscale* architecture-specific flags for GCC
+ # -F/path path to uninstalled frameworks, gcc on darwin
+ # -p, -pg, --coverage, -fprofile-* profiling flags for GCC
+ # @file GCC response files
+ # -tp=* Portland pgcc target processor selection
+ # --sysroot=* for sysroot support
+ # -O*, -flto*, -fwhopr*, -fuse-linker-plugin GCC link-time optimization
+ -64|-mips[0-9]|-r[0-9][0-9]*|-xarch=*|-xtarget=*|+DA*|+DD*|-q*|-m*| \
+ -t[45]*|-txscale*|-p|-pg|--coverage|-fprofile-*|-F*|@*|-tp=*|--sysroot=*| \
+ -O*|-flto*|-fwhopr*|-fuse-linker-plugin)
+ func_quote_for_eval "$arg"
+ arg="$func_quote_for_eval_result"
+ func_append compile_command " $arg"
+ func_append finalize_command " $arg"
+ func_append compiler_flags " $arg"
+ continue
+ ;;
+
+ # Some other compiler flag.
+ -* | +*)
+ func_quote_for_eval "$arg"
+ arg="$func_quote_for_eval_result"
+ ;;
+
+ *.$objext)
+ # A standard object.
+ func_append objs " $arg"
+ ;;
+
+ *.lo)
+ # A libtool-controlled object.
+
+ # Check to see that this really is a libtool object.
+ if func_lalib_unsafe_p "$arg"; then
+ pic_object=
+ non_pic_object=
+
+ # Read the .lo file
+ func_source "$arg"
+
+ if test -z "$pic_object" ||
+ test -z "$non_pic_object" ||
+ test "$pic_object" = none &&
+ test "$non_pic_object" = none; then
+ func_fatal_error "cannot find name of object for \`$arg'"
+ fi
+
+ # Extract subdirectory from the argument.
+ func_dirname "$arg" "/" ""
+ xdir="$func_dirname_result"
+
+ if test "$pic_object" != none; then
+ # Prepend the subdirectory the object is found in.
+ pic_object="$xdir$pic_object"
+
+ if test "$prev" = dlfiles; then
+ if test "$build_libtool_libs" = yes && test "$dlopen_support" = yes; then
+ func_append dlfiles " $pic_object"
+ prev=
+ continue
+ else
+ # If libtool objects are unsupported, then we need to preload.
+ prev=dlprefiles
+ fi
+ fi
+
+ # CHECK ME: I think I busted this. -Ossama
+ if test "$prev" = dlprefiles; then
+ # Preload the old-style object.
+ func_append dlprefiles " $pic_object"
+ prev=
+ fi
+
+ # A PIC object.
+ func_append libobjs " $pic_object"
+ arg="$pic_object"
+ fi
+
+ # Non-PIC object.
+ if test "$non_pic_object" != none; then
+ # Prepend the subdirectory the object is found in.
+ non_pic_object="$xdir$non_pic_object"
+
+ # A standard non-PIC object
+ func_append non_pic_objects " $non_pic_object"
+ if test -z "$pic_object" || test "$pic_object" = none ; then
+ arg="$non_pic_object"
+ fi
+ else
+ # If the PIC object exists, use it instead.
+ # $xdir was prepended to $pic_object above.
+ non_pic_object="$pic_object"
+ func_append non_pic_objects " $non_pic_object"
+ fi
+ else
+ # Only an error if not doing a dry-run.
+ if $opt_dry_run; then
+ # Extract subdirectory from the argument.
+ func_dirname "$arg" "/" ""
+ xdir="$func_dirname_result"
+
+ func_lo2o "$arg"
+ pic_object=$xdir$objdir/$func_lo2o_result
+ non_pic_object=$xdir$func_lo2o_result
+ func_append libobjs " $pic_object"
+ func_append non_pic_objects " $non_pic_object"
+ else
+ func_fatal_error "\`$arg' is not a valid libtool object"
+ fi
+ fi
+ ;;
+
+ *.$libext)
+ # An archive.
+ func_append deplibs " $arg"
+ func_append old_deplibs " $arg"
+ continue
+ ;;
+
+ *.la)
+ # A libtool-controlled library.
+
+ func_resolve_sysroot "$arg"
+ if test "$prev" = dlfiles; then
+ # This library was specified with -dlopen.
+ func_append dlfiles " $func_resolve_sysroot_result"
+ prev=
+ elif test "$prev" = dlprefiles; then
+ # The library was specified with -dlpreopen.
+ func_append dlprefiles " $func_resolve_sysroot_result"
+ prev=
+ else
+ func_append deplibs " $func_resolve_sysroot_result"
+ fi
+ continue
+ ;;
+
+ # Some other compiler argument.
+ *)
+ # Unknown arguments in both finalize_command and compile_command need
+ # to be aesthetically quoted because they are evaled later.
+ func_quote_for_eval "$arg"
+ arg="$func_quote_for_eval_result"
+ ;;
+ esac # arg
+
+ # Now actually substitute the argument into the commands.
+ if test -n "$arg"; then
+ func_append compile_command " $arg"
+ func_append finalize_command " $arg"
+ fi
+ done # argument parsing loop
+
+ test -n "$prev" && \
+ func_fatal_help "the \`$prevarg' option requires an argument"
+
+ if test "$export_dynamic" = yes && test -n "$export_dynamic_flag_spec"; then
+ eval arg=\"$export_dynamic_flag_spec\"
+ func_append compile_command " $arg"
+ func_append finalize_command " $arg"
+ fi
+
+ oldlibs=
+ # calculate the name of the file, without its directory
+ func_basename "$output"
+ outputname="$func_basename_result"
+ libobjs_save="$libobjs"
+
+ if test -n "$shlibpath_var"; then
+ # get the directories listed in $shlibpath_var
+ eval shlib_search_path=\`\$ECHO \"\${$shlibpath_var}\" \| \$SED \'s/:/ /g\'\`
+ else
+ shlib_search_path=
+ fi
+ eval sys_lib_search_path=\"$sys_lib_search_path_spec\"
+ eval sys_lib_dlsearch_path=\"$sys_lib_dlsearch_path_spec\"
+
+ func_dirname "$output" "/" ""
+ output_objdir="$func_dirname_result$objdir"
+ func_to_tool_file "$output_objdir/"
+ tool_output_objdir=$func_to_tool_file_result
+ # Create the object directory.
+ func_mkdir_p "$output_objdir"
+
+ # Determine the type of output
+ case $output in
+ "")
+ func_fatal_help "you must specify an output file"
+ ;;
+ *.$libext) linkmode=oldlib ;;
+ *.lo | *.$objext) linkmode=obj ;;
+ *.la) linkmode=lib ;;
+ *) linkmode=prog ;; # Anything else should be a program.
+ esac
+
+ specialdeplibs=
+
+ libs=
+ # Find all interdependent deplibs by searching for libraries
+ # that are linked more than once (e.g. -la -lb -la)
+ for deplib in $deplibs; do
+ if $opt_preserve_dup_deps ; then
+ case "$libs " in
+ *" $deplib "*) func_append specialdeplibs " $deplib" ;;
+ esac
+ fi
+ func_append libs " $deplib"
+ done
+
+ if test "$linkmode" = lib; then
+ libs="$predeps $libs $compiler_lib_search_path $postdeps"
+
+ # Compute libraries that are listed more than once in $predeps
+ # $postdeps and mark them as special (i.e., whose duplicates are
+ # not to be eliminated).
+ pre_post_deps=
+ if $opt_duplicate_compiler_generated_deps; then
+ for pre_post_dep in $predeps $postdeps; do
+ case "$pre_post_deps " in
+ *" $pre_post_dep "*) func_append specialdeplibs " $pre_post_deps" ;;
+ esac
+ func_append pre_post_deps " $pre_post_dep"
+ done
+ fi
+ pre_post_deps=
+ fi
+
+ deplibs=
+ newdependency_libs=
+ newlib_search_path=
+ need_relink=no # whether we're linking any uninstalled libtool libraries
+ notinst_deplibs= # not-installed libtool libraries
+ notinst_path= # paths that contain not-installed libtool libraries
+
+ case $linkmode in
+ lib)
+ passes="conv dlpreopen link"
+ for file in $dlfiles $dlprefiles; do
+ case $file in
+ *.la) ;;
+ *)
+ func_fatal_help "libraries can \`-dlopen' only libtool libraries: $file"
+ ;;
+ esac
+ done
+ ;;
+ prog)
+ compile_deplibs=
+ finalize_deplibs=
+ alldeplibs=no
+ newdlfiles=
+ newdlprefiles=
+ passes="conv scan dlopen dlpreopen link"
+ ;;
+ *) passes="conv"
+ ;;
+ esac
+
+ for pass in $passes; do
+ # The preopen pass in lib mode reverses $deplibs; put it back here
+ # so that -L comes before libs that need it for instance...
+ if test "$linkmode,$pass" = "lib,link"; then
+ ## FIXME: Find the place where the list is rebuilt in the wrong
+ ## order, and fix it there properly
+ tmp_deplibs=
+ for deplib in $deplibs; do
+ tmp_deplibs="$deplib $tmp_deplibs"
+ done
+ deplibs="$tmp_deplibs"
+ fi
+
+ if test "$linkmode,$pass" = "lib,link" ||
+ test "$linkmode,$pass" = "prog,scan"; then
+ libs="$deplibs"
+ deplibs=
+ fi
+ if test "$linkmode" = prog; then
+ case $pass in
+ dlopen) libs="$dlfiles" ;;
+ dlpreopen) libs="$dlprefiles" ;;
+ link) libs="$deplibs %DEPLIBS% $dependency_libs" ;;
+ esac
+ fi
+ if test "$linkmode,$pass" = "lib,dlpreopen"; then
+ # Collect and forward deplibs of preopened libtool libs
+ for lib in $dlprefiles; do
+ # Ignore non-libtool-libs
+ dependency_libs=
+ func_resolve_sysroot "$lib"
+ case $lib in
+ *.la) func_source "$func_resolve_sysroot_result" ;;
+ esac
+
+ # Collect preopened libtool deplibs, except any this library
+ # has declared as weak libs
+ for deplib in $dependency_libs; do
+ func_basename "$deplib"
+ deplib_base=$func_basename_result
+ case " $weak_libs " in
+ *" $deplib_base "*) ;;
+ *) func_append deplibs " $deplib" ;;
+ esac
+ done
+ done
+ libs="$dlprefiles"
+ fi
+ if test "$pass" = dlopen; then
+ # Collect dlpreopened libraries
+ save_deplibs="$deplibs"
+ deplibs=
+ fi
+
+ for deplib in $libs; do
+ lib=
+ found=no
+ case $deplib in
+ -mt|-mthreads|-kthread|-Kthread|-pthread|-pthreads|--thread-safe|-threads)
+ if test "$linkmode,$pass" = "prog,link"; then
+ compile_deplibs="$deplib $compile_deplibs"
+ finalize_deplibs="$deplib $finalize_deplibs"
+ else
+ func_append compiler_flags " $deplib"
+ if test "$linkmode" = lib ; then
+ case "$new_inherited_linker_flags " in
+ *" $deplib "*) ;;
+ * ) func_append new_inherited_linker_flags " $deplib" ;;
+ esac
+ fi
+ fi
+ continue
+ ;;
+ -l*)
+ if test "$linkmode" != lib && test "$linkmode" != prog; then
+ func_warning "\`-l' is ignored for archives/objects"
+ continue
+ fi
+ func_stripname '-l' '' "$deplib"
+ name=$func_stripname_result
+ if test "$linkmode" = lib; then
+ searchdirs="$newlib_search_path $lib_search_path $compiler_lib_search_dirs $sys_lib_search_path $shlib_search_path"
+ else
+ searchdirs="$newlib_search_path $lib_search_path $sys_lib_search_path $shlib_search_path"
+ fi
+ for searchdir in $searchdirs; do
+ for search_ext in .la $std_shrext .so .a; do
+ # Search the libtool library
+ lib="$searchdir/lib${name}${search_ext}"
+ if test -f "$lib"; then
+ if test "$search_ext" = ".la"; then
+ found=yes
+ else
+ found=no
+ fi
+ break 2
+ fi
+ done
+ done
+ if test "$found" != yes; then
+ # deplib doesn't seem to be a libtool library
+ if test "$linkmode,$pass" = "prog,link"; then
+ compile_deplibs="$deplib $compile_deplibs"
+ finalize_deplibs="$deplib $finalize_deplibs"
+ else
+ deplibs="$deplib $deplibs"
+ test "$linkmode" = lib && newdependency_libs="$deplib $newdependency_libs"
+ fi
+ continue
+ else # deplib is a libtool library
+ # If $allow_libtool_libs_with_static_runtimes && $deplib is a stdlib,
+ # We need to do some special things here, and not later.
+ if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
+ case " $predeps $postdeps " in
+ *" $deplib "*)
+ if func_lalib_p "$lib"; then
+ library_names=
+ old_library=
+ func_source "$lib"
+ for l in $old_library $library_names; do
+ ll="$l"
+ done
+ if test "X$ll" = "X$old_library" ; then # only static version available
+ found=no
+ func_dirname "$lib" "" "."
+ ladir="$func_dirname_result"
+ lib=$ladir/$old_library
+ if test "$linkmode,$pass" = "prog,link"; then
+ compile_deplibs="$deplib $compile_deplibs"
+ finalize_deplibs="$deplib $finalize_deplibs"
+ else
+ deplibs="$deplib $deplibs"
+ test "$linkmode" = lib && newdependency_libs="$deplib $newdependency_libs"
+ fi
+ continue
+ fi
+ fi
+ ;;
+ *) ;;
+ esac
+ fi
+ fi
+ ;; # -l
+ *.ltframework)
+ if test "$linkmode,$pass" = "prog,link"; then
+ compile_deplibs="$deplib $compile_deplibs"
+ finalize_deplibs="$deplib $finalize_deplibs"
+ else
+ deplibs="$deplib $deplibs"
+ if test "$linkmode" = lib ; then
+ case "$new_inherited_linker_flags " in
+ *" $deplib "*) ;;
+ * ) func_append new_inherited_linker_flags " $deplib" ;;
+ esac
+ fi
+ fi
+ continue
+ ;;
+ -L*)
+ case $linkmode in
+ lib)
+ deplibs="$deplib $deplibs"
+ test "$pass" = conv && continue
+ newdependency_libs="$deplib $newdependency_libs"
+ func_stripname '-L' '' "$deplib"
+ func_resolve_sysroot "$func_stripname_result"
+ func_append newlib_search_path " $func_resolve_sysroot_result"
+ ;;
+ prog)
+ if test "$pass" = conv; then
+ deplibs="$deplib $deplibs"
+ continue
+ fi
+ if test "$pass" = scan; then
+ deplibs="$deplib $deplibs"
+ else
+ compile_deplibs="$deplib $compile_deplibs"
+ finalize_deplibs="$deplib $finalize_deplibs"
+ fi
+ func_stripname '-L' '' "$deplib"
+ func_resolve_sysroot "$func_stripname_result"
+ func_append newlib_search_path " $func_resolve_sysroot_result"
+ ;;
+ *)
+ func_warning "\`-L' is ignored for archives/objects"
+ ;;
+ esac # linkmode
+ continue
+ ;; # -L
+ -R*)
+ if test "$pass" = link; then
+ func_stripname '-R' '' "$deplib"
+ func_resolve_sysroot "$func_stripname_result"
+ dir=$func_resolve_sysroot_result
+ # Make sure the xrpath contains only unique directories.
+ case "$xrpath " in
+ *" $dir "*) ;;
+ *) func_append xrpath " $dir" ;;
+ esac
+ fi
+ deplibs="$deplib $deplibs"
+ continue
+ ;;
+ *.la)
+ func_resolve_sysroot "$deplib"
+ lib=$func_resolve_sysroot_result
+ ;;
+ *.$libext)
+ if test "$pass" = conv; then
+ deplibs="$deplib $deplibs"
+ continue
+ fi
+ case $linkmode in
+ lib)
+ # Linking convenience modules into shared libraries is allowed,
+ # but linking other static libraries is non-portable.
+ case " $dlpreconveniencelibs " in
+ *" $deplib "*) ;;
+ *)
+ valid_a_lib=no
+ case $deplibs_check_method in
+ match_pattern*)
+ set dummy $deplibs_check_method; shift
+ match_pattern_regex=`expr "$deplibs_check_method" : "$1 \(.*\)"`
+ if eval "\$ECHO \"$deplib\"" 2>/dev/null | $SED 10q \
+ | $EGREP "$match_pattern_regex" > /dev/null; then
+ valid_a_lib=yes
+ fi
+ ;;
+ pass_all)
+ valid_a_lib=yes
+ ;;
+ esac
+ if test "$valid_a_lib" != yes; then
+ echo
+ $ECHO "*** Warning: Trying to link with static lib archive $deplib."
+ echo "*** I have the capability to make that library automatically link in when"
+ echo "*** you link to this library. But I can only do this if you have a"
+ echo "*** shared version of the library, which you do not appear to have"
+ echo "*** because the file extensions .$libext of this argument makes me believe"
+ echo "*** that it is just a static archive that I should not use here."
+ else
+ echo
+ $ECHO "*** Warning: Linking the shared library $output against the"
+ $ECHO "*** static library $deplib is not portable!"
+ deplibs="$deplib $deplibs"
+ fi
+ ;;
+ esac
+ continue
+ ;;
+ prog)
+ if test "$pass" != link; then
+ deplibs="$deplib $deplibs"
+ else
+ compile_deplibs="$deplib $compile_deplibs"
+ finalize_deplibs="$deplib $finalize_deplibs"
+ fi
+ continue
+ ;;
+ esac # linkmode
+ ;; # *.$libext
+ *.lo | *.$objext)
+ if test "$pass" = conv; then
+ deplibs="$deplib $deplibs"
+ elif test "$linkmode" = prog; then
+ if test "$pass" = dlpreopen || test "$dlopen_support" != yes || test "$build_libtool_libs" = no; then
+ # If there is no dlopen support or we're linking statically,
+ # we need to preload.
+ func_append newdlprefiles " $deplib"
+ compile_deplibs="$deplib $compile_deplibs"
+ finalize_deplibs="$deplib $finalize_deplibs"
+ else
+ func_append newdlfiles " $deplib"
+ fi
+ fi
+ continue
+ ;;
+ %DEPLIBS%)
+ alldeplibs=yes
+ continue
+ ;;
+ esac # case $deplib
+
+ if test "$found" = yes || test -f "$lib"; then :
+ else
+ func_fatal_error "cannot find the library \`$lib' or unhandled argument \`$deplib'"
+ fi
+
+ # Check to see that this really is a libtool archive.
+ func_lalib_unsafe_p "$lib" \
+ || func_fatal_error "\`$lib' is not a valid libtool archive"
+
+ func_dirname "$lib" "" "."
+ ladir="$func_dirname_result"
+
+ dlname=
+ dlopen=
+ dlpreopen=
+ libdir=
+ library_names=
+ old_library=
+ inherited_linker_flags=
+ # If the library was installed with an old release of libtool,
+ # it will not redefine variables installed, or shouldnotlink
+ installed=yes
+ shouldnotlink=no
+ avoidtemprpath=
+
+
+ # Read the .la file
+ func_source "$lib"
+
+ # Convert "-framework foo" to "foo.ltframework"
+ if test -n "$inherited_linker_flags"; then
+ tmp_inherited_linker_flags=`$ECHO "$inherited_linker_flags" | $SED 's/-framework \([^ $]*\)/\1.ltframework/g'`
+ for tmp_inherited_linker_flag in $tmp_inherited_linker_flags; do
+ case " $new_inherited_linker_flags " in
+ *" $tmp_inherited_linker_flag "*) ;;
+ *) func_append new_inherited_linker_flags " $tmp_inherited_linker_flag";;
+ esac
+ done
+ fi
+ dependency_libs=`$ECHO " $dependency_libs" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'`
+ if test "$linkmode,$pass" = "lib,link" ||
+ test "$linkmode,$pass" = "prog,scan" ||
+ { test "$linkmode" != prog && test "$linkmode" != lib; }; then
+ test -n "$dlopen" && func_append dlfiles " $dlopen"
+ test -n "$dlpreopen" && func_append dlprefiles " $dlpreopen"
+ fi
+
+ if test "$pass" = conv; then
+ # Only check for convenience libraries
+ deplibs="$lib $deplibs"
+ if test -z "$libdir"; then
+ if test -z "$old_library"; then
+ func_fatal_error "cannot find name of link library for \`$lib'"
+ fi
+ # It is a libtool convenience library, so add in its objects.
+ func_append convenience " $ladir/$objdir/$old_library"
+ func_append old_convenience " $ladir/$objdir/$old_library"
+ elif test "$linkmode" != prog && test "$linkmode" != lib; then
+ func_fatal_error "\`$lib' is not a convenience library"
+ fi
+ tmp_libs=
+ for deplib in $dependency_libs; do
+ deplibs="$deplib $deplibs"
+ if $opt_preserve_dup_deps ; then
+ case "$tmp_libs " in
+ *" $deplib "*) func_append specialdeplibs " $deplib" ;;
+ esac
+ fi
+ func_append tmp_libs " $deplib"
+ done
+ continue
+ fi # $pass = conv
+
+
+ # Get the name of the library we link against.
+ linklib=
+ if test -n "$old_library" &&
+ { test "$prefer_static_libs" = yes ||
+ test "$prefer_static_libs,$installed" = "built,no"; }; then
+ linklib=$old_library
+ else
+ for l in $old_library $library_names; do
+ linklib="$l"
+ done
+ fi
+ if test -z "$linklib"; then
+ func_fatal_error "cannot find name of link library for \`$lib'"
+ fi
+
+ # This library was specified with -dlopen.
+ if test "$pass" = dlopen; then
+ if test -z "$libdir"; then
+ func_fatal_error "cannot -dlopen a convenience library: \`$lib'"
+ fi
+ if test -z "$dlname" ||
+ test "$dlopen_support" != yes ||
+ test "$build_libtool_libs" = no; then
+ # If there is no dlname, no dlopen support or we're linking
+ # statically, we need to preload. We also need to preload any
+ # dependent libraries so libltdl's deplib preloader doesn't
+ # bomb out in the load deplibs phase.
+ func_append dlprefiles " $lib $dependency_libs"
+ else
+ func_append newdlfiles " $lib"
+ fi
+ continue
+ fi # $pass = dlopen
+
+ # We need an absolute path.
+ case $ladir in
+ [\\/]* | [A-Za-z]:[\\/]*) abs_ladir="$ladir" ;;
+ *)
+ abs_ladir=`cd "$ladir" && pwd`
+ if test -z "$abs_ladir"; then
+ func_warning "cannot determine absolute directory name of \`$ladir'"
+ func_warning "passing it literally to the linker, although it might fail"
+ abs_ladir="$ladir"
+ fi
+ ;;
+ esac
+ func_basename "$lib"
+ laname="$func_basename_result"
+
+ # Find the relevant object directory and library name.
+ if test "X$installed" = Xyes; then
+ if test ! -f "$lt_sysroot$libdir/$linklib" && test -f "$abs_ladir/$linklib"; then
+ func_warning "library \`$lib' was moved."
+ dir="$ladir"
+ absdir="$abs_ladir"
+ libdir="$abs_ladir"
+ else
+ dir="$lt_sysroot$libdir"
+ absdir="$lt_sysroot$libdir"
+ fi
+ test "X$hardcode_automatic" = Xyes && avoidtemprpath=yes
+ else
+ if test ! -f "$ladir/$objdir/$linklib" && test -f "$abs_ladir/$linklib"; then
+ dir="$ladir"
+ absdir="$abs_ladir"
+ # Remove this search path later
+ func_append notinst_path " $abs_ladir"
+ else
+ dir="$ladir/$objdir"
+ absdir="$abs_ladir/$objdir"
+ # Remove this search path later
+ func_append notinst_path " $abs_ladir"
+ fi
+ fi # $installed = yes
+ func_stripname 'lib' '.la' "$laname"
+ name=$func_stripname_result
+
+ # This library was specified with -dlpreopen.
+ if test "$pass" = dlpreopen; then
+ if test -z "$libdir" && test "$linkmode" = prog; then
+ func_fatal_error "only libraries may -dlpreopen a convenience library: \`$lib'"
+ fi
+ case "$host" in
+ # special handling for platforms with PE-DLLs.
+ *cygwin* | *mingw* | *cegcc* )
+ # Linker will automatically link against shared library if both
+ # static and shared are present. Therefore, ensure we extract
+ # symbols from the import library if a shared library is present
+ # (otherwise, the dlopen module name will be incorrect). We do
+ # this by putting the import library name into $newdlprefiles.
+ # We recover the dlopen module name by 'saving' the la file
+ # name in a special purpose variable, and (later) extracting the
+ # dlname from the la file.
+ if test -n "$dlname"; then
+ func_tr_sh "$dir/$linklib"
+ eval "libfile_$func_tr_sh_result=\$abs_ladir/\$laname"
+ func_append newdlprefiles " $dir/$linklib"
+ else
+ func_append newdlprefiles " $dir/$old_library"
+ # Keep a list of preopened convenience libraries to check
+ # that they are being used correctly in the link pass.
+ test -z "$libdir" && \
+ func_append dlpreconveniencelibs " $dir/$old_library"
+ fi
+ ;;
+ * )
+ # Prefer using a static library (so that no silly _DYNAMIC symbols
+ # are required to link).
+ if test -n "$old_library"; then
+ func_append newdlprefiles " $dir/$old_library"
+ # Keep a list of preopened convenience libraries to check
+ # that they are being used correctly in the link pass.
+ test -z "$libdir" && \
+ func_append dlpreconveniencelibs " $dir/$old_library"
+ # Otherwise, use the dlname, so that lt_dlopen finds it.
+ elif test -n "$dlname"; then
+ func_append newdlprefiles " $dir/$dlname"
+ else
+ func_append newdlprefiles " $dir/$linklib"
+ fi
+ ;;
+ esac
+ fi # $pass = dlpreopen
+
+ if test -z "$libdir"; then
+ # Link the convenience library
+ if test "$linkmode" = lib; then
+ deplibs="$dir/$old_library $deplibs"
+ elif test "$linkmode,$pass" = "prog,link"; then
+ compile_deplibs="$dir/$old_library $compile_deplibs"
+ finalize_deplibs="$dir/$old_library $finalize_deplibs"
+ else
+ deplibs="$lib $deplibs" # used for prog,scan pass
+ fi
+ continue
+ fi
+
+
+ if test "$linkmode" = prog && test "$pass" != link; then
+ func_append newlib_search_path " $ladir"
+ deplibs="$lib $deplibs"
+
+ linkalldeplibs=no
+ if test "$link_all_deplibs" != no || test -z "$library_names" ||
+ test "$build_libtool_libs" = no; then
+ linkalldeplibs=yes
+ fi
+
+ tmp_libs=
+ for deplib in $dependency_libs; do
+ case $deplib in
+ -L*) func_stripname '-L' '' "$deplib"
+ func_resolve_sysroot "$func_stripname_result"
+ func_append newlib_search_path " $func_resolve_sysroot_result"
+ ;;
+ esac
+ # Need to link against all dependency_libs?
+ if test "$linkalldeplibs" = yes; then
+ deplibs="$deplib $deplibs"
+ else
+ # Need to hardcode shared library paths
+ # or/and link against static libraries
+ newdependency_libs="$deplib $newdependency_libs"
+ fi
+ if $opt_preserve_dup_deps ; then
+ case "$tmp_libs " in
+ *" $deplib "*) func_append specialdeplibs " $deplib" ;;
+ esac
+ fi
+ func_append tmp_libs " $deplib"
+ done # for deplib
+ continue
+ fi # $linkmode = prog...
+
+ if test "$linkmode,$pass" = "prog,link"; then
+ if test -n "$library_names" &&
+ { { test "$prefer_static_libs" = no ||
+ test "$prefer_static_libs,$installed" = "built,yes"; } ||
+ test -z "$old_library"; }; then
+ # We need to hardcode the library path
+ if test -n "$shlibpath_var" && test -z "$avoidtemprpath" ; then
+ # Make sure the rpath contains only unique directories.
+ case "$temp_rpath:" in
+ *"$absdir:"*) ;;
+ *) func_append temp_rpath "$absdir:" ;;
+ esac
+ fi
+
+ # Hardcode the library path.
+ # Skip directories that are in the system default run-time
+ # search path.
+ case " $sys_lib_dlsearch_path " in
+ *" $absdir "*) ;;
+ *)
+ case "$compile_rpath " in
+ *" $absdir "*) ;;
+ *) func_append compile_rpath " $absdir" ;;
+ esac
+ ;;
+ esac
+ case " $sys_lib_dlsearch_path " in
+ *" $libdir "*) ;;
+ *)
+ case "$finalize_rpath " in
+ *" $libdir "*) ;;
+ *) func_append finalize_rpath " $libdir" ;;
+ esac
+ ;;
+ esac
+ fi # $linkmode,$pass = prog,link...
+
+ if test "$alldeplibs" = yes &&
+ { test "$deplibs_check_method" = pass_all ||
+ { test "$build_libtool_libs" = yes &&
+ test -n "$library_names"; }; }; then
+ # We only need to search for static libraries
+ continue
+ fi
+ fi
+
+ link_static=no # Whether the deplib will be linked statically
+ use_static_libs=$prefer_static_libs
+ if test "$use_static_libs" = built && test "$installed" = yes; then
+ use_static_libs=no
+ fi
+ if test -n "$library_names" &&
+ { test "$use_static_libs" = no || test -z "$old_library"; }; then
+ case $host in
+ *cygwin* | *mingw* | *cegcc*)
+ # No point in relinking DLLs because paths are not encoded
+ func_append notinst_deplibs " $lib"
+ need_relink=no
+ ;;
+ *)
+ if test "$installed" = no; then
+ func_append notinst_deplibs " $lib"
+ need_relink=yes
+ fi
+ ;;
+ esac
+ # This is a shared library
+
+ # Warn about portability, can't link against -module's on some
+ # systems (darwin). Don't bleat about dlopened modules though!
+ dlopenmodule=""
+ for dlpremoduletest in $dlprefiles; do
+ if test "X$dlpremoduletest" = "X$lib"; then
+ dlopenmodule="$dlpremoduletest"
+ break
+ fi
+ done
+ if test -z "$dlopenmodule" && test "$shouldnotlink" = yes && test "$pass" = link; then
+ echo
+ if test "$linkmode" = prog; then
+ $ECHO "*** Warning: Linking the executable $output against the loadable module"
+ else
+ $ECHO "*** Warning: Linking the shared library $output against the loadable module"
+ fi
+ $ECHO "*** $linklib is not portable!"
+ fi
+ if test "$linkmode" = lib &&
+ test "$hardcode_into_libs" = yes; then
+ # Hardcode the library path.
+ # Skip directories that are in the system default run-time
+ # search path.
+ case " $sys_lib_dlsearch_path " in
+ *" $absdir "*) ;;
+ *)
+ case "$compile_rpath " in
+ *" $absdir "*) ;;
+ *) func_append compile_rpath " $absdir" ;;
+ esac
+ ;;
+ esac
+ case " $sys_lib_dlsearch_path " in
+ *" $libdir "*) ;;
+ *)
+ case "$finalize_rpath " in
+ *" $libdir "*) ;;
+ *) func_append finalize_rpath " $libdir" ;;
+ esac
+ ;;
+ esac
+ fi
+
+ if test -n "$old_archive_from_expsyms_cmds"; then
+ # figure out the soname
+ set dummy $library_names
+ shift
+ realname="$1"
+ shift
+ libname=`eval "\\$ECHO \"$libname_spec\""`
+ # use dlname if we got it. it's perfectly good, no?
+ if test -n "$dlname"; then
+ soname="$dlname"
+ elif test -n "$soname_spec"; then
+ # bleh windows
+ case $host in
+ *cygwin* | mingw* | *cegcc*)
+ func_arith $current - $age
+ major=$func_arith_result
+ versuffix="-$major"
+ ;;
+ esac
+ eval soname=\"$soname_spec\"
+ else
+ soname="$realname"
+ fi
+
+ # Make a new name for the extract_expsyms_cmds to use
+ soroot="$soname"
+ func_basename "$soroot"
+ soname="$func_basename_result"
+ func_stripname 'lib' '.dll' "$soname"
+ newlib=libimp-$func_stripname_result.a
+
+ # If the library has no export list, then create one now
+ if test -f "$output_objdir/$soname-def"; then :
+ else
+ func_verbose "extracting exported symbol list from \`$soname'"
+ func_execute_cmds "$extract_expsyms_cmds" 'exit $?'
+ fi
+
+ # Create $newlib
+ if test -f "$output_objdir/$newlib"; then :; else
+ func_verbose "generating import library for \`$soname'"
+ func_execute_cmds "$old_archive_from_expsyms_cmds" 'exit $?'
+ fi
+ # make sure the library variables are pointing to the new library
+ dir=$output_objdir
+ linklib=$newlib
+ fi # test -n "$old_archive_from_expsyms_cmds"
+
+ if test "$linkmode" = prog || test "$opt_mode" != relink; then
+ add_shlibpath=
+ add_dir=
+ add=
+ lib_linked=yes
+ case $hardcode_action in
+ immediate | unsupported)
+ if test "$hardcode_direct" = no; then
+ add="$dir/$linklib"
+ case $host in
+ *-*-sco3.2v5.0.[024]*) add_dir="-L$dir" ;;
+ *-*-sysv4*uw2*) add_dir="-L$dir" ;;
+ *-*-sysv5OpenUNIX* | *-*-sysv5UnixWare7.[01].[10]* | \
+ *-*-unixware7*) add_dir="-L$dir" ;;
+ *-*-darwin* )
+ # if the lib is a (non-dlopened) module then we can not
+ # link against it, someone is ignoring the earlier warnings
+ if /usr/bin/file -L $add 2> /dev/null |
+ $GREP ": [^:]* bundle" >/dev/null ; then
+ if test "X$dlopenmodule" != "X$lib"; then
+ $ECHO "*** Warning: lib $linklib is a module, not a shared library"
+ if test -z "$old_library" ; then
+ echo
+ echo "*** And there doesn't seem to be a static archive available"
+ echo "*** The link will probably fail, sorry"
+ else
+ add="$dir/$old_library"
+ fi
+ elif test -n "$old_library"; then
+ add="$dir/$old_library"
+ fi
+ fi
+ esac
+ elif test "$hardcode_minus_L" = no; then
+ case $host in
+ *-*-sunos*) add_shlibpath="$dir" ;;
+ esac
+ add_dir="-L$dir"
+ add="-l$name"
+ elif test "$hardcode_shlibpath_var" = no; then
+ add_shlibpath="$dir"
+ add="-l$name"
+ else
+ lib_linked=no
+ fi
+ ;;
+ relink)
+ if test "$hardcode_direct" = yes &&
+ test "$hardcode_direct_absolute" = no; then
+ add="$dir/$linklib"
+ elif test "$hardcode_minus_L" = yes; then
+ add_dir="-L$dir"
+ # Try looking first in the location we're being installed to.
+ if test -n "$inst_prefix_dir"; then
+ case $libdir in
+ [\\/]*)
+ func_append add_dir " -L$inst_prefix_dir$libdir"
+ ;;
+ esac
+ fi
+ add="-l$name"
+ elif test "$hardcode_shlibpath_var" = yes; then
+ add_shlibpath="$dir"
+ add="-l$name"
+ else
+ lib_linked=no
+ fi
+ ;;
+ *) lib_linked=no ;;
+ esac
+
+ if test "$lib_linked" != yes; then
+ func_fatal_configuration "unsupported hardcode properties"
+ fi
+
+ if test -n "$add_shlibpath"; then
+ case :$compile_shlibpath: in
+ *":$add_shlibpath:"*) ;;
+ *) func_append compile_shlibpath "$add_shlibpath:" ;;
+ esac
+ fi
+ if test "$linkmode" = prog; then
+ test -n "$add_dir" && compile_deplibs="$add_dir $compile_deplibs"
+ test -n "$add" && compile_deplibs="$add $compile_deplibs"
+ else
+ test -n "$add_dir" && deplibs="$add_dir $deplibs"
+ test -n "$add" && deplibs="$add $deplibs"
+ if test "$hardcode_direct" != yes &&
+ test "$hardcode_minus_L" != yes &&
+ test "$hardcode_shlibpath_var" = yes; then
+ case :$finalize_shlibpath: in
+ *":$libdir:"*) ;;
+ *) func_append finalize_shlibpath "$libdir:" ;;
+ esac
+ fi
+ fi
+ fi
+
+ if test "$linkmode" = prog || test "$opt_mode" = relink; then
+ add_shlibpath=
+ add_dir=
+ add=
+ # Finalize command for both is simple: just hardcode it.
+ if test "$hardcode_direct" = yes &&
+ test "$hardcode_direct_absolute" = no; then
+ add="$libdir/$linklib"
+ elif test "$hardcode_minus_L" = yes; then
+ add_dir="-L$libdir"
+ add="-l$name"
+ elif test "$hardcode_shlibpath_var" = yes; then
+ case :$finalize_shlibpath: in
+ *":$libdir:"*) ;;
+ *) func_append finalize_shlibpath "$libdir:" ;;
+ esac
+ add="-l$name"
+ elif test "$hardcode_automatic" = yes; then
+ if test -n "$inst_prefix_dir" &&
+ test -f "$inst_prefix_dir$libdir/$linklib" ; then
+ add="$inst_prefix_dir$libdir/$linklib"
+ else
+ add="$libdir/$linklib"
+ fi
+ else
+ # We cannot seem to hardcode it, guess we'll fake it.
+ add_dir="-L$libdir"
+ # Try looking first in the location we're being installed to.
+ if test -n "$inst_prefix_dir"; then
+ case $libdir in
+ [\\/]*)
+ func_append add_dir " -L$inst_prefix_dir$libdir"
+ ;;
+ esac
+ fi
+ add="-l$name"
+ fi
+
+ if test "$linkmode" = prog; then
+ test -n "$add_dir" && finalize_deplibs="$add_dir $finalize_deplibs"
+ test -n "$add" && finalize_deplibs="$add $finalize_deplibs"
+ else
+ test -n "$add_dir" && deplibs="$add_dir $deplibs"
+ test -n "$add" && deplibs="$add $deplibs"
+ fi
+ fi
+ elif test "$linkmode" = prog; then
+ # Here we assume that one of hardcode_direct or hardcode_minus_L
+ # is not unsupported. This is valid on all known static and
+ # shared platforms.
+ if test "$hardcode_direct" != unsupported; then
+ test -n "$old_library" && linklib="$old_library"
+ compile_deplibs="$dir/$linklib $compile_deplibs"
+ finalize_deplibs="$dir/$linklib $finalize_deplibs"
+ else
+ compile_deplibs="-l$name -L$dir $compile_deplibs"
+ finalize_deplibs="-l$name -L$dir $finalize_deplibs"
+ fi
+ elif test "$build_libtool_libs" = yes; then
+ # Not a shared library
+ if test "$deplibs_check_method" != pass_all; then
+ # We're trying link a shared library against a static one
+ # but the system doesn't support it.
+
+ # Just print a warning and add the library to dependency_libs so
+ # that the program can be linked against the static library.
+ echo
+ $ECHO "*** Warning: This system can not link to static lib archive $lib."
+ echo "*** I have the capability to make that library automatically link in when"
+ echo "*** you link to this library. But I can only do this if you have a"
+ echo "*** shared version of the library, which you do not appear to have."
+ if test "$module" = yes; then
+ echo "*** But as you try to build a module library, libtool will still create "
+ echo "*** a static module, that should work as long as the dlopening application"
+ echo "*** is linked with the -dlopen flag to resolve symbols at runtime."
+ if test -z "$global_symbol_pipe"; then
+ echo
+ echo "*** However, this would only work if libtool was able to extract symbol"
+ echo "*** lists from a program, using \`nm' or equivalent, but libtool could"
+ echo "*** not find such a program. So, this module is probably useless."
+ echo "*** \`nm' from GNU binutils and a full rebuild may help."
+ fi
+ if test "$build_old_libs" = no; then
+ build_libtool_libs=module
+ build_old_libs=yes
+ else
+ build_libtool_libs=no
+ fi
+ fi
+ else
+ deplibs="$dir/$old_library $deplibs"
+ link_static=yes
+ fi
+ fi # link shared/static library?
+
+ if test "$linkmode" = lib; then
+ if test -n "$dependency_libs" &&
+ { test "$hardcode_into_libs" != yes ||
+ test "$build_old_libs" = yes ||
+ test "$link_static" = yes; }; then
+ # Extract -R from dependency_libs
+ temp_deplibs=
+ for libdir in $dependency_libs; do
+ case $libdir in
+ -R*) func_stripname '-R' '' "$libdir"
+ temp_xrpath=$func_stripname_result
+ case " $xrpath " in
+ *" $temp_xrpath "*) ;;
+ *) func_append xrpath " $temp_xrpath";;
+ esac;;
+ *) func_append temp_deplibs " $libdir";;
+ esac
+ done
+ dependency_libs="$temp_deplibs"
+ fi
+
+ func_append newlib_search_path " $absdir"
+ # Link against this library
+ test "$link_static" = no && newdependency_libs="$abs_ladir/$laname $newdependency_libs"
+ # ... and its dependency_libs
+ tmp_libs=
+ for deplib in $dependency_libs; do
+ newdependency_libs="$deplib $newdependency_libs"
+ case $deplib in
+ -L*) func_stripname '-L' '' "$deplib"
+ func_resolve_sysroot "$func_stripname_result";;
+ *) func_resolve_sysroot "$deplib" ;;
+ esac
+ if $opt_preserve_dup_deps ; then
+ case "$tmp_libs " in
+ *" $func_resolve_sysroot_result "*)
+ func_append specialdeplibs " $func_resolve_sysroot_result" ;;
+ esac
+ fi
+ func_append tmp_libs " $func_resolve_sysroot_result"
+ done
+
+ if test "$link_all_deplibs" != no; then
+ # Add the search paths of all dependency libraries
+ for deplib in $dependency_libs; do
+ path=
+ case $deplib in
+ -L*) path="$deplib" ;;
+ *.la)
+ func_resolve_sysroot "$deplib"
+ deplib=$func_resolve_sysroot_result
+ func_dirname "$deplib" "" "."
+ dir=$func_dirname_result
+ # We need an absolute path.
+ case $dir in
+ [\\/]* | [A-Za-z]:[\\/]*) absdir="$dir" ;;
+ *)
+ absdir=`cd "$dir" && pwd`
+ if test -z "$absdir"; then
+ func_warning "cannot determine absolute directory name of \`$dir'"
+ absdir="$dir"
+ fi
+ ;;
+ esac
+ if $GREP "^installed=no" $deplib > /dev/null; then
+ case $host in
+ *-*-darwin*)
+ depdepl=
+ eval deplibrary_names=`${SED} -n -e 's/^library_names=\(.*\)$/\1/p' $deplib`
+ if test -n "$deplibrary_names" ; then
+ for tmp in $deplibrary_names ; do
+ depdepl=$tmp
+ done
+ if test -f "$absdir/$objdir/$depdepl" ; then
+ depdepl="$absdir/$objdir/$depdepl"
+ darwin_install_name=`${OTOOL} -L $depdepl | awk '{if (NR == 2) {print $1;exit}}'`
+ if test -z "$darwin_install_name"; then
+ darwin_install_name=`${OTOOL64} -L $depdepl | awk '{if (NR == 2) {print $1;exit}}'`
+ fi
+ func_append compiler_flags " ${wl}-dylib_file ${wl}${darwin_install_name}:${depdepl}"
+ func_append linker_flags " -dylib_file ${darwin_install_name}:${depdepl}"
+ path=
+ fi
+ fi
+ ;;
+ *)
+ path="-L$absdir/$objdir"
+ ;;
+ esac
+ else
+ eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $deplib`
+ test -z "$libdir" && \
+ func_fatal_error "\`$deplib' is not a valid libtool archive"
+ test "$absdir" != "$libdir" && \
+ func_warning "\`$deplib' seems to be moved"
+
+ path="-L$absdir"
+ fi
+ ;;
+ esac
+ case " $deplibs " in
+ *" $path "*) ;;
+ *) deplibs="$path $deplibs" ;;
+ esac
+ done
+ fi # link_all_deplibs != no
+ fi # linkmode = lib
+ done # for deplib in $libs
+ if test "$pass" = link; then
+ if test "$linkmode" = "prog"; then
+ compile_deplibs="$new_inherited_linker_flags $compile_deplibs"
+ finalize_deplibs="$new_inherited_linker_flags $finalize_deplibs"
+ else
+ compiler_flags="$compiler_flags "`$ECHO " $new_inherited_linker_flags" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'`
+ fi
+ fi
+ dependency_libs="$newdependency_libs"
+ if test "$pass" = dlpreopen; then
+ # Link the dlpreopened libraries before other libraries
+ for deplib in $save_deplibs; do
+ deplibs="$deplib $deplibs"
+ done
+ fi
+ if test "$pass" != dlopen; then
+ if test "$pass" != conv; then
+ # Make sure lib_search_path contains only unique directories.
+ lib_search_path=
+ for dir in $newlib_search_path; do
+ case "$lib_search_path " in
+ *" $dir "*) ;;
+ *) func_append lib_search_path " $dir" ;;
+ esac
+ done
+ newlib_search_path=
+ fi
+
+ if test "$linkmode,$pass" != "prog,link"; then
+ vars="deplibs"
+ else
+ vars="compile_deplibs finalize_deplibs"
+ fi
+ for var in $vars dependency_libs; do
+ # Add libraries to $var in reverse order
+ eval tmp_libs=\"\$$var\"
+ new_libs=
+ for deplib in $tmp_libs; do
+ # FIXME: Pedantically, this is the right thing to do, so
+ # that some nasty dependency loop isn't accidentally
+ # broken:
+ #new_libs="$deplib $new_libs"
+ # Pragmatically, this seems to cause very few problems in
+ # practice:
+ case $deplib in
+ -L*) new_libs="$deplib $new_libs" ;;
+ -R*) ;;
+ *)
+ # And here is the reason: when a library appears more
+ # than once as an explicit dependence of a library, or
+ # is implicitly linked in more than once by the
+ # compiler, it is considered special, and multiple
+ # occurrences thereof are not removed. Compare this
+ # with having the same library being listed as a
+ # dependency of multiple other libraries: in this case,
+ # we know (pedantically, we assume) the library does not
+ # need to be listed more than once, so we keep only the
+ # last copy. This is not always right, but it is rare
+ # enough that we require users that really mean to play
+ # such unportable linking tricks to link the library
+ # using -Wl,-lname, so that libtool does not consider it
+ # for duplicate removal.
+ case " $specialdeplibs " in
+ *" $deplib "*) new_libs="$deplib $new_libs" ;;
+ *)
+ case " $new_libs " in
+ *" $deplib "*) ;;
+ *) new_libs="$deplib $new_libs" ;;
+ esac
+ ;;
+ esac
+ ;;
+ esac
+ done
+ tmp_libs=
+ for deplib in $new_libs; do
+ case $deplib in
+ -L*)
+ case " $tmp_libs " in
+ *" $deplib "*) ;;
+ *) func_append tmp_libs " $deplib" ;;
+ esac
+ ;;
+ *) func_append tmp_libs " $deplib" ;;
+ esac
+ done
+ eval $var=\"$tmp_libs\"
+ done # for var
+ fi
+ # Last step: remove runtime libs from dependency_libs
+ # (they stay in deplibs)
+ tmp_libs=
+ for i in $dependency_libs ; do
+ case " $predeps $postdeps $compiler_lib_search_path " in
+ *" $i "*)
+ i=""
+ ;;
+ esac
+ if test -n "$i" ; then
+ func_append tmp_libs " $i"
+ fi
+ done
+ dependency_libs=$tmp_libs
+ done # for pass
+ if test "$linkmode" = prog; then
+ dlfiles="$newdlfiles"
+ fi
+ if test "$linkmode" = prog || test "$linkmode" = lib; then
+ dlprefiles="$newdlprefiles"
+ fi
+
+ case $linkmode in
+ oldlib)
+ if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then
+ func_warning "\`-dlopen' is ignored for archives"
+ fi
+
+ case " $deplibs" in
+ *\ -l* | *\ -L*)
+ func_warning "\`-l' and \`-L' are ignored for archives" ;;
+ esac
+
+ test -n "$rpath" && \
+ func_warning "\`-rpath' is ignored for archives"
+
+ test -n "$xrpath" && \
+ func_warning "\`-R' is ignored for archives"
+
+ test -n "$vinfo" && \
+ func_warning "\`-version-info/-version-number' is ignored for archives"
+
+ test -n "$release" && \
+ func_warning "\`-release' is ignored for archives"
+
+ test -n "$export_symbols$export_symbols_regex" && \
+ func_warning "\`-export-symbols' is ignored for archives"
+
+ # Now set the variables for building old libraries.
+ build_libtool_libs=no
+ oldlibs="$output"
+ func_append objs "$old_deplibs"
+ ;;
+
+ lib)
+ # Make sure we only generate libraries of the form `libNAME.la'.
+ case $outputname in
+ lib*)
+ func_stripname 'lib' '.la' "$outputname"
+ name=$func_stripname_result
+ eval shared_ext=\"$shrext_cmds\"
+ eval libname=\"$libname_spec\"
+ ;;
+ *)
+ test "$module" = no && \
+ func_fatal_help "libtool library \`$output' must begin with \`lib'"
+
+ if test "$need_lib_prefix" != no; then
+ # Add the "lib" prefix for modules if required
+ func_stripname '' '.la' "$outputname"
+ name=$func_stripname_result
+ eval shared_ext=\"$shrext_cmds\"
+ eval libname=\"$libname_spec\"
+ else
+ func_stripname '' '.la' "$outputname"
+ libname=$func_stripname_result
+ fi
+ ;;
+ esac
+
+ if test -n "$objs"; then
+ if test "$deplibs_check_method" != pass_all; then
+ func_fatal_error "cannot build libtool library \`$output' from non-libtool objects on this host:$objs"
+ else
+ echo
+ $ECHO "*** Warning: Linking the shared library $output against the non-libtool"
+ $ECHO "*** objects $objs is not portable!"
+ func_append libobjs " $objs"
+ fi
+ fi
+
+ test "$dlself" != no && \
+ func_warning "\`-dlopen self' is ignored for libtool libraries"
+
+ set dummy $rpath
+ shift
+ test "$#" -gt 1 && \
+ func_warning "ignoring multiple \`-rpath's for a libtool library"
+
+ install_libdir="$1"
+
+ oldlibs=
+ if test -z "$rpath"; then
+ if test "$build_libtool_libs" = yes; then
+ # Building a libtool convenience library.
+ # Some compilers have problems with a `.al' extension so
+ # convenience libraries should have the same extension an
+ # archive normally would.
+ oldlibs="$output_objdir/$libname.$libext $oldlibs"
+ build_libtool_libs=convenience
+ build_old_libs=yes
+ fi
+
+ test -n "$vinfo" && \
+ func_warning "\`-version-info/-version-number' is ignored for convenience libraries"
+
+ test -n "$release" && \
+ func_warning "\`-release' is ignored for convenience libraries"
+ else
+
+ # Parse the version information argument.
+ save_ifs="$IFS"; IFS=':'
+ set dummy $vinfo 0 0 0
+ shift
+ IFS="$save_ifs"
+
+ test -n "$7" && \
+ func_fatal_help "too many parameters to \`-version-info'"
+
+ # convert absolute version numbers to libtool ages
+ # this retains compatibility with .la files and attempts
+ # to make the code below a bit more comprehensible
+
+ case $vinfo_number in
+ yes)
+ number_major="$1"
+ number_minor="$2"
+ number_revision="$3"
+ #
+ # There are really only two kinds -- those that
+ # use the current revision as the major version
+ # and those that subtract age and use age as
+ # a minor version. But, then there is irix
+ # which has an extra 1 added just for fun
+ #
+ case $version_type in
+ darwin|linux|osf|windows|none)
+ func_arith $number_major + $number_minor
+ current=$func_arith_result
+ age="$number_minor"
+ revision="$number_revision"
+ ;;
+ freebsd-aout|freebsd-elf|qnx|sunos)
+ current="$number_major"
+ revision="$number_minor"
+ age="0"
+ ;;
+ irix|nonstopux)
+ func_arith $number_major + $number_minor
+ current=$func_arith_result
+ age="$number_minor"
+ revision="$number_minor"
+ lt_irix_increment=no
+ ;;
+ esac
+ ;;
+ no)
+ current="$1"
+ revision="$2"
+ age="$3"
+ ;;
+ esac
+
+ # Check that each of the things are valid numbers.
+ case $current in
+ 0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;;
+ *)
+ func_error "CURRENT \`$current' must be a nonnegative integer"
+ func_fatal_error "\`$vinfo' is not valid version information"
+ ;;
+ esac
+
+ case $revision in
+ 0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;;
+ *)
+ func_error "REVISION \`$revision' must be a nonnegative integer"
+ func_fatal_error "\`$vinfo' is not valid version information"
+ ;;
+ esac
+
+ case $age in
+ 0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;;
+ *)
+ func_error "AGE \`$age' must be a nonnegative integer"
+ func_fatal_error "\`$vinfo' is not valid version information"
+ ;;
+ esac
+
+ if test "$age" -gt "$current"; then
+ func_error "AGE \`$age' is greater than the current interface number \`$current'"
+ func_fatal_error "\`$vinfo' is not valid version information"
+ fi
+
+ # Calculate the version variables.
+ major=
+ versuffix=
+ verstring=
+ case $version_type in
+ none) ;;
+
+ darwin)
+ # Like Linux, but with the current version available in
+ # verstring for coding it into the library header
+ func_arith $current - $age
+ major=.$func_arith_result
+ versuffix="$major.$age.$revision"
+ # Darwin ld doesn't like 0 for these options...
+ func_arith $current + 1
+ minor_current=$func_arith_result
+ xlcverstring="${wl}-compatibility_version ${wl}$minor_current ${wl}-current_version ${wl}$minor_current.$revision"
+ verstring="-compatibility_version $minor_current -current_version $minor_current.$revision"
+ ;;
+
+ freebsd-aout)
+ major=".$current"
+ versuffix=".$current.$revision";
+ ;;
+
+ freebsd-elf)
+ major=".$current"
+ versuffix=".$current"
+ ;;
+
+ irix | nonstopux)
+ if test "X$lt_irix_increment" = "Xno"; then
+ func_arith $current - $age
+ else
+ func_arith $current - $age + 1
+ fi
+ major=$func_arith_result
+
+ case $version_type in
+ nonstopux) verstring_prefix=nonstopux ;;
+ *) verstring_prefix=sgi ;;
+ esac
+ verstring="$verstring_prefix$major.$revision"
+
+ # Add in all the interfaces that we are compatible with.
+ loop=$revision
+ while test "$loop" -ne 0; do
+ func_arith $revision - $loop
+ iface=$func_arith_result
+ func_arith $loop - 1
+ loop=$func_arith_result
+ verstring="$verstring_prefix$major.$iface:$verstring"
+ done
+
+ # Before this point, $major must not contain `.'.
+ major=.$major
+ versuffix="$major.$revision"
+ ;;
+
+ linux)
+ func_arith $current - $age
+ major=.$func_arith_result
+ versuffix="$major.$age.$revision"
+ ;;
+
+ osf)
+ func_arith $current - $age
+ major=.$func_arith_result
+ versuffix=".$current.$age.$revision"
+ verstring="$current.$age.$revision"
+
+ # Add in all the interfaces that we are compatible with.
+ loop=$age
+ while test "$loop" -ne 0; do
+ func_arith $current - $loop
+ iface=$func_arith_result
+ func_arith $loop - 1
+ loop=$func_arith_result
+ verstring="$verstring:${iface}.0"
+ done
+
+ # Make executables depend on our current version.
+ func_append verstring ":${current}.0"
+ ;;
+
+ qnx)
+ major=".$current"
+ versuffix=".$current"
+ ;;
+
+ sunos)
+ major=".$current"
+ versuffix=".$current.$revision"
+ ;;
+
+ windows)
+ # Use '-' rather than '.', since we only want one
+ # extension on DOS 8.3 filesystems.
+ func_arith $current - $age
+ major=$func_arith_result
+ versuffix="-$major"
+ ;;
+
+ *)
+ func_fatal_configuration "unknown library version type \`$version_type'"
+ ;;
+ esac
+
+ # Clear the version info if we defaulted, and they specified a release.
+ if test -z "$vinfo" && test -n "$release"; then
+ major=
+ case $version_type in
+ darwin)
+ # we can't check for "0.0" in archive_cmds due to quoting
+ # problems, so we reset it completely
+ verstring=
+ ;;
+ *)
+ verstring="0.0"
+ ;;
+ esac
+ if test "$need_version" = no; then
+ versuffix=
+ else
+ versuffix=".0.0"
+ fi
+ fi
+
+ # Remove version info from name if versioning should be avoided
+ if test "$avoid_version" = yes && test "$need_version" = no; then
+ major=
+ versuffix=
+ verstring=""
+ fi
+
+ # Check to see if the archive will have undefined symbols.
+ if test "$allow_undefined" = yes; then
+ if test "$allow_undefined_flag" = unsupported; then
+ func_warning "undefined symbols not allowed in $host shared libraries"
+ build_libtool_libs=no
+ build_old_libs=yes
+ fi
+ else
+ # Don't allow undefined symbols.
+ allow_undefined_flag="$no_undefined_flag"
+ fi
+
+ fi
+
+ func_generate_dlsyms "$libname" "$libname" "yes"
+ func_append libobjs " $symfileobj"
+ test "X$libobjs" = "X " && libobjs=
+
+ if test "$opt_mode" != relink; then
+ # Remove our outputs, but don't remove object files since they
+ # may have been created when compiling PIC objects.
+ removelist=
+ tempremovelist=`$ECHO "$output_objdir/*"`
+ for p in $tempremovelist; do
+ case $p in
+ *.$objext | *.gcno)
+ ;;
+ $output_objdir/$outputname | $output_objdir/$libname.* | $output_objdir/${libname}${release}.*)
+ if test "X$precious_files_regex" != "X"; then
+ if $ECHO "$p" | $EGREP -e "$precious_files_regex" >/dev/null 2>&1
+ then
+ continue
+ fi
+ fi
+ func_append removelist " $p"
+ ;;
+ *) ;;
+ esac
+ done
+ test -n "$removelist" && \
+ func_show_eval "${RM}r \$removelist"
+ fi
+
+ # Now set the variables for building old libraries.
+ if test "$build_old_libs" = yes && test "$build_libtool_libs" != convenience ; then
+ func_append oldlibs " $output_objdir/$libname.$libext"
+
+ # Transform .lo files to .o files.
+ oldobjs="$objs "`$ECHO "$libobjs" | $SP2NL | $SED "/\.${libext}$/d; $lo2o" | $NL2SP`
+ fi
+
+ # Eliminate all temporary directories.
+ #for path in $notinst_path; do
+ # lib_search_path=`$ECHO "$lib_search_path " | $SED "s% $path % %g"`
+ # deplibs=`$ECHO "$deplibs " | $SED "s% -L$path % %g"`
+ # dependency_libs=`$ECHO "$dependency_libs " | $SED "s% -L$path % %g"`
+ #done
+
+ if test -n "$xrpath"; then
+ # If the user specified any rpath flags, then add them.
+ temp_xrpath=
+ for libdir in $xrpath; do
+ func_replace_sysroot "$libdir"
+ func_append temp_xrpath " -R$func_replace_sysroot_result"
+ case "$finalize_rpath " in
+ *" $libdir "*) ;;
+ *) func_append finalize_rpath " $libdir" ;;
+ esac
+ done
+ if test "$hardcode_into_libs" != yes || test "$build_old_libs" = yes; then
+ dependency_libs="$temp_xrpath $dependency_libs"
+ fi
+ fi
+
+ # Make sure dlfiles contains only unique files that won't be dlpreopened
+ old_dlfiles="$dlfiles"
+ dlfiles=
+ for lib in $old_dlfiles; do
+ case " $dlprefiles $dlfiles " in
+ *" $lib "*) ;;
+ *) func_append dlfiles " $lib" ;;
+ esac
+ done
+
+ # Make sure dlprefiles contains only unique files
+ old_dlprefiles="$dlprefiles"
+ dlprefiles=
+ for lib in $old_dlprefiles; do
+ case "$dlprefiles " in
+ *" $lib "*) ;;
+ *) func_append dlprefiles " $lib" ;;
+ esac
+ done
+
+ if test "$build_libtool_libs" = yes; then
+ if test -n "$rpath"; then
+ case $host in
+ *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-*-beos* | *-cegcc* | *-*-haiku*)
+ # these systems don't actually have a c library (as such)!
+ ;;
+ *-*-rhapsody* | *-*-darwin1.[012])
+ # Rhapsody C library is in the System framework
+ func_append deplibs " System.ltframework"
+ ;;
+ *-*-netbsd*)
+ # Don't link with libc until the a.out ld.so is fixed.
+ ;;
+ *-*-openbsd* | *-*-freebsd* | *-*-dragonfly*)
+ # Do not include libc due to us having libc/libc_r.
+ ;;
+ *-*-sco3.2v5* | *-*-sco5v6*)
+ # Causes problems with __ctype
+ ;;
+ *-*-sysv4.2uw2* | *-*-sysv5* | *-*-unixware* | *-*-OpenUNIX*)
+ # Compiler inserts libc in the correct place for threads to work
+ ;;
+ *)
+ # Add libc to deplibs on all other systems if necessary.
+ if test "$build_libtool_need_lc" = "yes"; then
+ func_append deplibs " -lc"
+ fi
+ ;;
+ esac
+ fi
+
+ # Transform deplibs into only deplibs that can be linked in shared.
+ name_save=$name
+ libname_save=$libname
+ release_save=$release
+ versuffix_save=$versuffix
+ major_save=$major
+ # I'm not sure if I'm treating the release correctly. I think
+ # release should show up in the -l (ie -lgmp5) so we don't want to
+ # add it in twice. Is that correct?
+ release=""
+ versuffix=""
+ major=""
+ newdeplibs=
+ droppeddeps=no
+ case $deplibs_check_method in
+ pass_all)
+ # Don't check for shared/static. Everything works.
+ # This might be a little naive. We might want to check
+ # whether the library exists or not. But this is on
+ # osf3 & osf4 and I'm not really sure... Just
+ # implementing what was already the behavior.
+ newdeplibs=$deplibs
+ ;;
+ test_compile)
+ # This code stresses the "libraries are programs" paradigm to its
+ # limits. Maybe even breaks it. We compile a program, linking it
+ # against the deplibs as a proxy for the library. Then we can check
+ # whether they linked in statically or dynamically with ldd.
+ $opt_dry_run || $RM conftest.c
+ cat > conftest.c <<EOF
+ int main() { return 0; }
+EOF
+ $opt_dry_run || $RM conftest
+ if $LTCC $LTCFLAGS -o conftest conftest.c $deplibs; then
+ ldd_output=`ldd conftest`
+ for i in $deplibs; do
+ case $i in
+ -l*)
+ func_stripname -l '' "$i"
+ name=$func_stripname_result
+ if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
+ case " $predeps $postdeps " in
+ *" $i "*)
+ func_append newdeplibs " $i"
+ i=""
+ ;;
+ esac
+ fi
+ if test -n "$i" ; then
+ libname=`eval "\\$ECHO \"$libname_spec\""`
+ deplib_matches=`eval "\\$ECHO \"$library_names_spec\""`
+ set dummy $deplib_matches; shift
+ deplib_match=$1
+ if test `expr "$ldd_output" : ".*$deplib_match"` -ne 0 ; then
+ func_append newdeplibs " $i"
+ else
+ droppeddeps=yes
+ echo
+ $ECHO "*** Warning: dynamic linker does not accept needed library $i."
+ echo "*** I have the capability to make that library automatically link in when"
+ echo "*** you link to this library. But I can only do this if you have a"
+ echo "*** shared version of the library, which I believe you do not have"
+ echo "*** because a test_compile did reveal that the linker did not use it for"
+ echo "*** its dynamic dependency list that programs get resolved with at runtime."
+ fi
+ fi
+ ;;
+ *)
+ func_append newdeplibs " $i"
+ ;;
+ esac
+ done
+ else
+ # Error occurred in the first compile. Let's try to salvage
+ # the situation: Compile a separate program for each library.
+ for i in $deplibs; do
+ case $i in
+ -l*)
+ func_stripname -l '' "$i"
+ name=$func_stripname_result
+ $opt_dry_run || $RM conftest
+ if $LTCC $LTCFLAGS -o conftest conftest.c $i; then
+ ldd_output=`ldd conftest`
+ if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
+ case " $predeps $postdeps " in
+ *" $i "*)
+ func_append newdeplibs " $i"
+ i=""
+ ;;
+ esac
+ fi
+ if test -n "$i" ; then
+ libname=`eval "\\$ECHO \"$libname_spec\""`
+ deplib_matches=`eval "\\$ECHO \"$library_names_spec\""`
+ set dummy $deplib_matches; shift
+ deplib_match=$1
+ if test `expr "$ldd_output" : ".*$deplib_match"` -ne 0 ; then
+ func_append newdeplibs " $i"
+ else
+ droppeddeps=yes
+ echo
+ $ECHO "*** Warning: dynamic linker does not accept needed library $i."
+ echo "*** I have the capability to make that library automatically link in when"
+ echo "*** you link to this library. But I can only do this if you have a"
+ echo "*** shared version of the library, which you do not appear to have"
+ echo "*** because a test_compile did reveal that the linker did not use this one"
+ echo "*** as a dynamic dependency that programs can get resolved with at runtime."
+ fi
+ fi
+ else
+ droppeddeps=yes
+ echo
+ $ECHO "*** Warning! Library $i is needed by this library but I was not able to"
+ echo "*** make it link in! You will probably need to install it or some"
+ echo "*** library that it depends on before this library will be fully"
+ echo "*** functional. Installing it before continuing would be even better."
+ fi
+ ;;
+ *)
+ func_append newdeplibs " $i"
+ ;;
+ esac
+ done
+ fi
+ ;;
+ file_magic*)
+ set dummy $deplibs_check_method; shift
+ file_magic_regex=`expr "$deplibs_check_method" : "$1 \(.*\)"`
+ for a_deplib in $deplibs; do
+ case $a_deplib in
+ -l*)
+ func_stripname -l '' "$a_deplib"
+ name=$func_stripname_result
+ if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
+ case " $predeps $postdeps " in
+ *" $a_deplib "*)
+ func_append newdeplibs " $a_deplib"
+ a_deplib=""
+ ;;
+ esac
+ fi
+ if test -n "$a_deplib" ; then
+ libname=`eval "\\$ECHO \"$libname_spec\""`
+ if test -n "$file_magic_glob"; then
+ libnameglob=`func_echo_all "$libname" | $SED -e $file_magic_glob`
+ else
+ libnameglob=$libname
+ fi
+ test "$want_nocaseglob" = yes && nocaseglob=`shopt -p nocaseglob`
+ for i in $lib_search_path $sys_lib_search_path $shlib_search_path; do
+ if test "$want_nocaseglob" = yes; then
+ shopt -s nocaseglob
+ potential_libs=`ls $i/$libnameglob[.-]* 2>/dev/null`
+ $nocaseglob
+ else
+ potential_libs=`ls $i/$libnameglob[.-]* 2>/dev/null`
+ fi
+ for potent_lib in $potential_libs; do
+ # Follow soft links.
+ if ls -lLd "$potent_lib" 2>/dev/null |
+ $GREP " -> " >/dev/null; then
+ continue
+ fi
+ # The statement above tries to avoid entering an
+ # endless loop below, in case of cyclic links.
+ # We might still enter an endless loop, since a link
+ # loop can be closed while we follow links,
+ # but so what?
+ potlib="$potent_lib"
+ while test -h "$potlib" 2>/dev/null; do
+ potliblink=`ls -ld $potlib | ${SED} 's/.* -> //'`
+ case $potliblink in
+ [\\/]* | [A-Za-z]:[\\/]*) potlib="$potliblink";;
+ *) potlib=`$ECHO "$potlib" | $SED 's,[^/]*$,,'`"$potliblink";;
+ esac
+ done
+ if eval $file_magic_cmd \"\$potlib\" 2>/dev/null |
+ $SED -e 10q |
+ $EGREP "$file_magic_regex" > /dev/null; then
+ func_append newdeplibs " $a_deplib"
+ a_deplib=""
+ break 2
+ fi
+ done
+ done
+ fi
+ if test -n "$a_deplib" ; then
+ droppeddeps=yes
+ echo
+ $ECHO "*** Warning: linker path does not have real file for library $a_deplib."
+ echo "*** I have the capability to make that library automatically link in when"
+ echo "*** you link to this library. But I can only do this if you have a"
+ echo "*** shared version of the library, which you do not appear to have"
+ echo "*** because I did check the linker path looking for a file starting"
+ if test -z "$potlib" ; then
+ $ECHO "*** with $libname but no candidates were found. (...for file magic test)"
+ else
+ $ECHO "*** with $libname and none of the candidates passed a file format test"
+ $ECHO "*** using a file magic. Last file checked: $potlib"
+ fi
+ fi
+ ;;
+ *)
+ # Add a -L argument.
+ func_append newdeplibs " $a_deplib"
+ ;;
+ esac
+ done # Gone through all deplibs.
+ ;;
+ match_pattern*)
+ set dummy $deplibs_check_method; shift
+ match_pattern_regex=`expr "$deplibs_check_method" : "$1 \(.*\)"`
+ for a_deplib in $deplibs; do
+ case $a_deplib in
+ -l*)
+ func_stripname -l '' "$a_deplib"
+ name=$func_stripname_result
+ if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
+ case " $predeps $postdeps " in
+ *" $a_deplib "*)
+ func_append newdeplibs " $a_deplib"
+ a_deplib=""
+ ;;
+ esac
+ fi
+ if test -n "$a_deplib" ; then
+ libname=`eval "\\$ECHO \"$libname_spec\""`
+ for i in $lib_search_path $sys_lib_search_path $shlib_search_path; do
+ potential_libs=`ls $i/$libname[.-]* 2>/dev/null`
+ for potent_lib in $potential_libs; do
+ potlib="$potent_lib" # see symlink-check above in file_magic test
+ if eval "\$ECHO \"$potent_lib\"" 2>/dev/null | $SED 10q | \
+ $EGREP "$match_pattern_regex" > /dev/null; then
+ func_append newdeplibs " $a_deplib"
+ a_deplib=""
+ break 2
+ fi
+ done
+ done
+ fi
+ if test -n "$a_deplib" ; then
+ droppeddeps=yes
+ echo
+ $ECHO "*** Warning: linker path does not have real file for library $a_deplib."
+ echo "*** I have the capability to make that library automatically link in when"
+ echo "*** you link to this library. But I can only do this if you have a"
+ echo "*** shared version of the library, which you do not appear to have"
+ echo "*** because I did check the linker path looking for a file starting"
+ if test -z "$potlib" ; then
+ $ECHO "*** with $libname but no candidates were found. (...for regex pattern test)"
+ else
+ $ECHO "*** with $libname and none of the candidates passed a file format test"
+ $ECHO "*** using a regex pattern. Last file checked: $potlib"
+ fi
+ fi
+ ;;
+ *)
+ # Add a -L argument.
+ func_append newdeplibs " $a_deplib"
+ ;;
+ esac
+ done # Gone through all deplibs.
+ ;;
+ none | unknown | *)
+ newdeplibs=""
+ tmp_deplibs=`$ECHO " $deplibs" | $SED 's/ -lc$//; s/ -[LR][^ ]*//g'`
+ if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
+ for i in $predeps $postdeps ; do
+ # can't use Xsed below, because $i might contain '/'
+ tmp_deplibs=`$ECHO " $tmp_deplibs" | $SED "s,$i,,"`
+ done
+ fi
+ case $tmp_deplibs in
+ *[!\ \ ]*)
+ echo
+ if test "X$deplibs_check_method" = "Xnone"; then
+ echo "*** Warning: inter-library dependencies are not supported in this platform."
+ else
+ echo "*** Warning: inter-library dependencies are not known to be supported."
+ fi
+ echo "*** All declared inter-library dependencies are being dropped."
+ droppeddeps=yes
+ ;;
+ esac
+ ;;
+ esac
+ versuffix=$versuffix_save
+ major=$major_save
+ release=$release_save
+ libname=$libname_save
+ name=$name_save
+
+ case $host in
+ *-*-rhapsody* | *-*-darwin1.[012])
+ # On Rhapsody replace the C library with the System framework
+ newdeplibs=`$ECHO " $newdeplibs" | $SED 's/ -lc / System.ltframework /'`
+ ;;
+ esac
+
+ if test "$droppeddeps" = yes; then
+ if test "$module" = yes; then
+ echo
+ echo "*** Warning: libtool could not satisfy all declared inter-library"
+ $ECHO "*** dependencies of module $libname. Therefore, libtool will create"
+ echo "*** a static module, that should work as long as the dlopening"
+ echo "*** application is linked with the -dlopen flag."
+ if test -z "$global_symbol_pipe"; then
+ echo
+ echo "*** However, this would only work if libtool was able to extract symbol"
+ echo "*** lists from a program, using \`nm' or equivalent, but libtool could"
+ echo "*** not find such a program. So, this module is probably useless."
+ echo "*** \`nm' from GNU binutils and a full rebuild may help."
+ fi
+ if test "$build_old_libs" = no; then
+ oldlibs="$output_objdir/$libname.$libext"
+ build_libtool_libs=module
+ build_old_libs=yes
+ else
+ build_libtool_libs=no
+ fi
+ else
+ echo "*** The inter-library dependencies that have been dropped here will be"
+ echo "*** automatically added whenever a program is linked with this library"
+ echo "*** or is declared to -dlopen it."
+
+ if test "$allow_undefined" = no; then
+ echo
+ echo "*** Since this library must not contain undefined symbols,"
+ echo "*** because either the platform does not support them or"
+ echo "*** it was explicitly requested with -no-undefined,"
+ echo "*** libtool will only create a static version of it."
+ if test "$build_old_libs" = no; then
+ oldlibs="$output_objdir/$libname.$libext"
+ build_libtool_libs=module
+ build_old_libs=yes
+ else
+ build_libtool_libs=no
+ fi
+ fi
+ fi
+ fi
+ # Done checking deplibs!
+ deplibs=$newdeplibs
+ fi
+ # Time to change all our "foo.ltframework" stuff back to "-framework foo"
+ case $host in
+ *-*-darwin*)
+ newdeplibs=`$ECHO " $newdeplibs" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'`
+ new_inherited_linker_flags=`$ECHO " $new_inherited_linker_flags" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'`
+ deplibs=`$ECHO " $deplibs" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'`
+ ;;
+ esac
+
+ # move library search paths that coincide with paths to not yet
+ # installed libraries to the beginning of the library search list
+ new_libs=
+ for path in $notinst_path; do
+ case " $new_libs " in
+ *" -L$path/$objdir "*) ;;
+ *)
+ case " $deplibs " in
+ *" -L$path/$objdir "*)
+ func_append new_libs " -L$path/$objdir" ;;
+ esac
+ ;;
+ esac
+ done
+ for deplib in $deplibs; do
+ case $deplib in
+ -L*)
+ case " $new_libs " in
+ *" $deplib "*) ;;
+ *) func_append new_libs " $deplib" ;;
+ esac
+ ;;
+ *) func_append new_libs " $deplib" ;;
+ esac
+ done
+ deplibs="$new_libs"
+
+ # All the library-specific variables (install_libdir is set above).
+ library_names=
+ old_library=
+ dlname=
+
+ # Test again, we may have decided not to build it any more
+ if test "$build_libtool_libs" = yes; then
+ if test "$hardcode_into_libs" = yes; then
+ # Hardcode the library paths
+ hardcode_libdirs=
+ dep_rpath=
+ rpath="$finalize_rpath"
+ test "$opt_mode" != relink && rpath="$compile_rpath$rpath"
+ for libdir in $rpath; do
+ if test -n "$hardcode_libdir_flag_spec"; then
+ if test -n "$hardcode_libdir_separator"; then
+ func_replace_sysroot "$libdir"
+ libdir=$func_replace_sysroot_result
+ if test -z "$hardcode_libdirs"; then
+ hardcode_libdirs="$libdir"
+ else
+ # Just accumulate the unique libdirs.
+ case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in
+ *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*)
+ ;;
+ *)
+ func_append hardcode_libdirs "$hardcode_libdir_separator$libdir"
+ ;;
+ esac
+ fi
+ else
+ eval flag=\"$hardcode_libdir_flag_spec\"
+ func_append dep_rpath " $flag"
+ fi
+ elif test -n "$runpath_var"; then
+ case "$perm_rpath " in
+ *" $libdir "*) ;;
+ *) func_apped perm_rpath " $libdir" ;;
+ esac
+ fi
+ done
+ # Substitute the hardcoded libdirs into the rpath.
+ if test -n "$hardcode_libdir_separator" &&
+ test -n "$hardcode_libdirs"; then
+ libdir="$hardcode_libdirs"
+ if test -n "$hardcode_libdir_flag_spec_ld"; then
+ eval dep_rpath=\"$hardcode_libdir_flag_spec_ld\"
+ else
+ eval dep_rpath=\"$hardcode_libdir_flag_spec\"
+ fi
+ fi
+ if test -n "$runpath_var" && test -n "$perm_rpath"; then
+ # We should set the runpath_var.
+ rpath=
+ for dir in $perm_rpath; do
+ func_append rpath "$dir:"
+ done
+ eval "$runpath_var='$rpath\$$runpath_var'; export $runpath_var"
+ fi
+ test -n "$dep_rpath" && deplibs="$dep_rpath $deplibs"
+ fi
+
+ shlibpath="$finalize_shlibpath"
+ test "$opt_mode" != relink && shlibpath="$compile_shlibpath$shlibpath"
+ if test -n "$shlibpath"; then
+ eval "$shlibpath_var='$shlibpath\$$shlibpath_var'; export $shlibpath_var"
+ fi
+
+ # Get the real and link names of the library.
+ eval shared_ext=\"$shrext_cmds\"
+ eval library_names=\"$library_names_spec\"
+ set dummy $library_names
+ shift
+ realname="$1"
+ shift
+
+ if test -n "$soname_spec"; then
+ eval soname=\"$soname_spec\"
+ else
+ soname="$realname"
+ fi
+ if test -z "$dlname"; then
+ dlname=$soname
+ fi
+
+ lib="$output_objdir/$realname"
+ linknames=
+ for link
+ do
+ func_append linknames " $link"
+ done
+
+ # Use standard objects if they are pic
+ test -z "$pic_flag" && libobjs=`$ECHO "$libobjs" | $SP2NL | $SED "$lo2o" | $NL2SP`
+ test "X$libobjs" = "X " && libobjs=
+
+ delfiles=
+ if test -n "$export_symbols" && test -n "$include_expsyms"; then
+ $opt_dry_run || cp "$export_symbols" "$output_objdir/$libname.uexp"
+ export_symbols="$output_objdir/$libname.uexp"
+ func_append delfiles " $export_symbols"
+ fi
+
+ orig_export_symbols=
+ case $host_os in
+ cygwin* | mingw* | cegcc*)
+ if test -n "$export_symbols" && test -z "$export_symbols_regex"; then
+ # exporting using user supplied symfile
+ if test "x`$SED 1q $export_symbols`" != xEXPORTS; then
+ # and it's NOT already a .def file. Must figure out
+ # which of the given symbols are data symbols and tag
+ # them as such. So, trigger use of export_symbols_cmds.
+ # export_symbols gets reassigned inside the "prepare
+ # the list of exported symbols" if statement, so the
+ # include_expsyms logic still works.
+ orig_export_symbols="$export_symbols"
+ export_symbols=
+ always_export_symbols=yes
+ fi
+ fi
+ ;;
+ esac
+
+ # Prepare the list of exported symbols
+ if test -z "$export_symbols"; then
+ if test "$always_export_symbols" = yes || test -n "$export_symbols_regex"; then
+ func_verbose "generating symbol list for \`$libname.la'"
+ export_symbols="$output_objdir/$libname.exp"
+ $opt_dry_run || $RM $export_symbols
+ cmds=$export_symbols_cmds
+ save_ifs="$IFS"; IFS='~'
+ for cmd1 in $cmds; do
+ IFS="$save_ifs"
+ # Take the normal branch if the nm_file_list_spec branch
+ # doesn't work or if tool conversion is not needed.
+ case $nm_file_list_spec~$to_tool_file_cmd in
+ *~func_convert_file_noop | *~func_convert_file_msys_to_w32 | ~*)
+ try_normal_branch=yes
+ eval cmd=\"$cmd1\"
+ func_len " $cmd"
+ len=$func_len_result
+ ;;
+ *)
+ try_normal_branch=no
+ ;;
+ esac
+ if test "$try_normal_branch" = yes \
+ && { test "$len" -lt "$max_cmd_len" \
+ || test "$max_cmd_len" -le -1; }
+ then
+ func_show_eval "$cmd" 'exit $?'
+ skipped_export=false
+ elif test -n "$nm_file_list_spec"; then
+ func_basename "$output"
+ output_la=$func_basename_result
+ save_libobjs=$libobjs
+ save_output=$output
+ output=${output_objdir}/${output_la}.nm
+ func_to_tool_file "$output"
+ libobjs=$nm_file_list_spec$func_to_tool_file_result
+ func_append delfiles " $output"
+ func_verbose "creating $NM input file list: $output"
+ for obj in $save_libobjs; do
+ func_to_tool_file "$obj"
+ $ECHO "$func_to_tool_file_result"
+ done > "$output"
+ eval cmd=\"$cmd1\"
+ func_show_eval "$cmd" 'exit $?'
+ output=$save_output
+ libobjs=$save_libobjs
+ skipped_export=false
+ else
+ # The command line is too long to execute in one step.
+ func_verbose "using reloadable object file for export list..."
+ skipped_export=:
+ # Break out early, otherwise skipped_export may be
+ # set to false by a later but shorter cmd.
+ break
+ fi
+ done
+ IFS="$save_ifs"
+ if test -n "$export_symbols_regex" && test "X$skipped_export" != "X:"; then
+ func_show_eval '$EGREP -e "$export_symbols_regex" "$export_symbols" > "${export_symbols}T"'
+ func_show_eval '$MV "${export_symbols}T" "$export_symbols"'
+ fi
+ fi
+ fi
+
+ if test -n "$export_symbols" && test -n "$include_expsyms"; then
+ tmp_export_symbols="$export_symbols"
+ test -n "$orig_export_symbols" && tmp_export_symbols="$orig_export_symbols"
+ $opt_dry_run || eval '$ECHO "$include_expsyms" | $SP2NL >> "$tmp_export_symbols"'
+ fi
+
+ if test "X$skipped_export" != "X:" && test -n "$orig_export_symbols"; then
+ # The given exports_symbols file has to be filtered, so filter it.
+ func_verbose "filter symbol list for \`$libname.la' to tag DATA exports"
+ # FIXME: $output_objdir/$libname.filter potentially contains lots of
+ # 's' commands which not all seds can handle. GNU sed should be fine
+ # though. Also, the filter scales superlinearly with the number of
+ # global variables. join(1) would be nice here, but unfortunately
+ # isn't a blessed tool.
+ $opt_dry_run || $SED -e '/[ ,]DATA/!d;s,\(.*\)\([ \,].*\),s|^\1$|\1\2|,' < $export_symbols > $output_objdir/$libname.filter
+ func_append delfiles " $export_symbols $output_objdir/$libname.filter"
+ export_symbols=$output_objdir/$libname.def
+ $opt_dry_run || $SED -f $output_objdir/$libname.filter < $orig_export_symbols > $export_symbols
+ fi
+
+ tmp_deplibs=
+ for test_deplib in $deplibs; do
+ case " $convenience " in
+ *" $test_deplib "*) ;;
+ *)
+ func_append tmp_deplibs " $test_deplib"
+ ;;
+ esac
+ done
+ deplibs="$tmp_deplibs"
+
+ if test -n "$convenience"; then
+ if test -n "$whole_archive_flag_spec" &&
+ test "$compiler_needs_object" = yes &&
+ test -z "$libobjs"; then
+ # extract the archives, so we have objects to list.
+ # TODO: could optimize this to just extract one archive.
+ whole_archive_flag_spec=
+ fi
+ if test -n "$whole_archive_flag_spec"; then
+ save_libobjs=$libobjs
+ eval libobjs=\"\$libobjs $whole_archive_flag_spec\"
+ test "X$libobjs" = "X " && libobjs=
+ else
+ gentop="$output_objdir/${outputname}x"
+ func_append generated " $gentop"
+
+ func_extract_archives $gentop $convenience
+ func_append libobjs " $func_extract_archives_result"
+ test "X$libobjs" = "X " && libobjs=
+ fi
+ fi
+
+ if test "$thread_safe" = yes && test -n "$thread_safe_flag_spec"; then
+ eval flag=\"$thread_safe_flag_spec\"
+ func_append linker_flags " $flag"
+ fi
+
+ # Make a backup of the uninstalled library when relinking
+ if test "$opt_mode" = relink; then
+ $opt_dry_run || eval '(cd $output_objdir && $RM ${realname}U && $MV $realname ${realname}U)' || exit $?
+ fi
+
+ # Do each of the archive commands.
+ if test "$module" = yes && test -n "$module_cmds" ; then
+ if test -n "$export_symbols" && test -n "$module_expsym_cmds"; then
+ eval test_cmds=\"$module_expsym_cmds\"
+ cmds=$module_expsym_cmds
+ else
+ eval test_cmds=\"$module_cmds\"
+ cmds=$module_cmds
+ fi
+ else
+ if test -n "$export_symbols" && test -n "$archive_expsym_cmds"; then
+ eval test_cmds=\"$archive_expsym_cmds\"
+ cmds=$archive_expsym_cmds
+ else
+ eval test_cmds=\"$archive_cmds\"
+ cmds=$archive_cmds
+ fi
+ fi
+
+ if test "X$skipped_export" != "X:" &&
+ func_len " $test_cmds" &&
+ len=$func_len_result &&
+ test "$len" -lt "$max_cmd_len" || test "$max_cmd_len" -le -1; then
+ :
+ else
+ # The command line is too long to link in one step, link piecewise
+ # or, if using GNU ld and skipped_export is not :, use a linker
+ # script.
+
+ # Save the value of $output and $libobjs because we want to
+ # use them later. If we have whole_archive_flag_spec, we
+ # want to use save_libobjs as it was before
+ # whole_archive_flag_spec was expanded, because we can't
+ # assume the linker understands whole_archive_flag_spec.
+ # This may have to be revisited, in case too many
+ # convenience libraries get linked in and end up exceeding
+ # the spec.
+ if test -z "$convenience" || test -z "$whole_archive_flag_spec"; then
+ save_libobjs=$libobjs
+ fi
+ save_output=$output
+ func_basename "$output"
+ output_la=$func_basename_result
+
+ # Clear the reloadable object creation command queue and
+ # initialize k to one.
+ test_cmds=
+ concat_cmds=
+ objlist=
+ last_robj=
+ k=1
+
+ if test -n "$save_libobjs" && test "X$skipped_export" != "X:" && test "$with_gnu_ld" = yes; then
+ output=${output_objdir}/${output_la}.lnkscript
+ func_verbose "creating GNU ld script: $output"
+ echo 'INPUT (' > $output
+ for obj in $save_libobjs
+ do
+ func_to_tool_file "$obj"
+ $ECHO "$func_to_tool_file_result" >> $output
+ done
+ echo ')' >> $output
+ func_append delfiles " $output"
+ func_to_tool_file "$output"
+ output=$func_to_tool_file_result
+ elif test -n "$save_libobjs" && test "X$skipped_export" != "X:" && test "X$file_list_spec" != X; then
+ output=${output_objdir}/${output_la}.lnk
+ func_verbose "creating linker input file list: $output"
+ : > $output
+ set x $save_libobjs
+ shift
+ firstobj=
+ if test "$compiler_needs_object" = yes; then
+ firstobj="$1 "
+ shift
+ fi
+ for obj
+ do
+ func_to_tool_file "$obj"
+ $ECHO "$func_to_tool_file_result" >> $output
+ done
+ func_append delfiles " $output"
+ func_to_tool_file "$output"
+ output=$firstobj\"$file_list_spec$func_to_tool_file_result\"
+ else
+ if test -n "$save_libobjs"; then
+ func_verbose "creating reloadable object files..."
+ output=$output_objdir/$output_la-${k}.$objext
+ eval test_cmds=\"$reload_cmds\"
+ func_len " $test_cmds"
+ len0=$func_len_result
+ len=$len0
+
+ # Loop over the list of objects to be linked.
+ for obj in $save_libobjs
+ do
+ func_len " $obj"
+ func_arith $len + $func_len_result
+ len=$func_arith_result
+ if test "X$objlist" = X ||
+ test "$len" -lt "$max_cmd_len"; then
+ func_append objlist " $obj"
+ else
+ # The command $test_cmds is almost too long, add a
+ # command to the queue.
+ if test "$k" -eq 1 ; then
+ # The first file doesn't have a previous command to add.
+ reload_objs=$objlist
+ eval concat_cmds=\"$reload_cmds\"
+ else
+ # All subsequent reloadable object files will link in
+ # the last one created.
+ reload_objs="$objlist $last_robj"
+ eval concat_cmds=\"\$concat_cmds~$reload_cmds~\$RM $last_robj\"
+ fi
+ last_robj=$output_objdir/$output_la-${k}.$objext
+ func_arith $k + 1
+ k=$func_arith_result
+ output=$output_objdir/$output_la-${k}.$objext
+ objlist=" $obj"
+ func_len " $last_robj"
+ func_arith $len0 + $func_len_result
+ len=$func_arith_result
+ fi
+ done
+ # Handle the remaining objects by creating one last
+ # reloadable object file. All subsequent reloadable object
+ # files will link in the last one created.
+ test -z "$concat_cmds" || concat_cmds=$concat_cmds~
+ reload_objs="$objlist $last_robj"
+ eval concat_cmds=\"\${concat_cmds}$reload_cmds\"
+ if test -n "$last_robj"; then
+ eval concat_cmds=\"\${concat_cmds}~\$RM $last_robj\"
+ fi
+ func_append delfiles " $output"
+
+ else
+ output=
+ fi
+
+ if ${skipped_export-false}; then
+ func_verbose "generating symbol list for \`$libname.la'"
+ export_symbols="$output_objdir/$libname.exp"
+ $opt_dry_run || $RM $export_symbols
+ libobjs=$output
+ # Append the command to create the export file.
+ test -z "$concat_cmds" || concat_cmds=$concat_cmds~
+ eval concat_cmds=\"\$concat_cmds$export_symbols_cmds\"
+ if test -n "$last_robj"; then
+ eval concat_cmds=\"\$concat_cmds~\$RM $last_robj\"
+ fi
+ fi
+
+ test -n "$save_libobjs" &&
+ func_verbose "creating a temporary reloadable object file: $output"
+
+ # Loop through the commands generated above and execute them.
+ save_ifs="$IFS"; IFS='~'
+ for cmd in $concat_cmds; do
+ IFS="$save_ifs"
+ $opt_silent || {
+ func_quote_for_expand "$cmd"
+ eval "func_echo $func_quote_for_expand_result"
+ }
+ $opt_dry_run || eval "$cmd" || {
+ lt_exit=$?
+
+ # Restore the uninstalled library and exit
+ if test "$opt_mode" = relink; then
+ ( cd "$output_objdir" && \
+ $RM "${realname}T" && \
+ $MV "${realname}U" "$realname" )
+ fi
+
+ exit $lt_exit
+ }
+ done
+ IFS="$save_ifs"
+
+ if test -n "$export_symbols_regex" && ${skipped_export-false}; then
+ func_show_eval '$EGREP -e "$export_symbols_regex" "$export_symbols" > "${export_symbols}T"'
+ func_show_eval '$MV "${export_symbols}T" "$export_symbols"'
+ fi
+ fi
+
+ if ${skipped_export-false}; then
+ if test -n "$export_symbols" && test -n "$include_expsyms"; then
+ tmp_export_symbols="$export_symbols"
+ test -n "$orig_export_symbols" && tmp_export_symbols="$orig_export_symbols"
+ $opt_dry_run || eval '$ECHO "$include_expsyms" | $SP2NL >> "$tmp_export_symbols"'
+ fi
+
+ if test -n "$orig_export_symbols"; then
+ # The given exports_symbols file has to be filtered, so filter it.
+ func_verbose "filter symbol list for \`$libname.la' to tag DATA exports"
+ # FIXME: $output_objdir/$libname.filter potentially contains lots of
+ # 's' commands which not all seds can handle. GNU sed should be fine
+ # though. Also, the filter scales superlinearly with the number of
+ # global variables. join(1) would be nice here, but unfortunately
+ # isn't a blessed tool.
+ $opt_dry_run || $SED -e '/[ ,]DATA/!d;s,\(.*\)\([ \,].*\),s|^\1$|\1\2|,' < $export_symbols > $output_objdir/$libname.filter
+ func_append delfiles " $export_symbols $output_objdir/$libname.filter"
+ export_symbols=$output_objdir/$libname.def
+ $opt_dry_run || $SED -f $output_objdir/$libname.filter < $orig_export_symbols > $export_symbols
+ fi
+ fi
+
+ libobjs=$output
+ # Restore the value of output.
+ output=$save_output
+
+ if test -n "$convenience" && test -n "$whole_archive_flag_spec"; then
+ eval libobjs=\"\$libobjs $whole_archive_flag_spec\"
+ test "X$libobjs" = "X " && libobjs=
+ fi
+ # Expand the library linking commands again to reset the
+ # value of $libobjs for piecewise linking.
+
+ # Do each of the archive commands.
+ if test "$module" = yes && test -n "$module_cmds" ; then
+ if test -n "$export_symbols" && test -n "$module_expsym_cmds"; then
+ cmds=$module_expsym_cmds
+ else
+ cmds=$module_cmds
+ fi
+ else
+ if test -n "$export_symbols" && test -n "$archive_expsym_cmds"; then
+ cmds=$archive_expsym_cmds
+ else
+ cmds=$archive_cmds
+ fi
+ fi
+ fi
+
+ if test -n "$delfiles"; then
+ # Append the command to remove temporary files to $cmds.
+ eval cmds=\"\$cmds~\$RM $delfiles\"
+ fi
+
+ # Add any objects from preloaded convenience libraries
+ if test -n "$dlprefiles"; then
+ gentop="$output_objdir/${outputname}x"
+ func_append generated " $gentop"
+
+ func_extract_archives $gentop $dlprefiles
+ func_append libobjs " $func_extract_archives_result"
+ test "X$libobjs" = "X " && libobjs=
+ fi
+
+ save_ifs="$IFS"; IFS='~'
+ for cmd in $cmds; do
+ IFS="$save_ifs"
+ eval cmd=\"$cmd\"
+ $opt_silent || {
+ func_quote_for_expand "$cmd"
+ eval "func_echo $func_quote_for_expand_result"
+ }
+ $opt_dry_run || eval "$cmd" || {
+ lt_exit=$?
+
+ # Restore the uninstalled library and exit
+ if test "$opt_mode" = relink; then
+ ( cd "$output_objdir" && \
+ $RM "${realname}T" && \
+ $MV "${realname}U" "$realname" )
+ fi
+
+ exit $lt_exit
+ }
+ done
+ IFS="$save_ifs"
+
+ # Restore the uninstalled library and exit
+ if test "$opt_mode" = relink; then
+ $opt_dry_run || eval '(cd $output_objdir && $RM ${realname}T && $MV $realname ${realname}T && $MV ${realname}U $realname)' || exit $?
+
+ if test -n "$convenience"; then
+ if test -z "$whole_archive_flag_spec"; then
+ func_show_eval '${RM}r "$gentop"'
+ fi
+ fi
+
+ exit $EXIT_SUCCESS
+ fi
+
+ # Create links to the real library.
+ for linkname in $linknames; do
+ if test "$realname" != "$linkname"; then
+ func_show_eval '(cd "$output_objdir" && $RM "$linkname" && $LN_S "$realname" "$linkname")' 'exit $?'
+ fi
+ done
+
+ # If -module or -export-dynamic was specified, set the dlname.
+ if test "$module" = yes || test "$export_dynamic" = yes; then
+ # On all known operating systems, these are identical.
+ dlname="$soname"
+ fi
+ fi
+ ;;
+
+ obj)
+ if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then
+ func_warning "\`-dlopen' is ignored for objects"
+ fi
+
+ case " $deplibs" in
+ *\ -l* | *\ -L*)
+ func_warning "\`-l' and \`-L' are ignored for objects" ;;
+ esac
+
+ test -n "$rpath" && \
+ func_warning "\`-rpath' is ignored for objects"
+
+ test -n "$xrpath" && \
+ func_warning "\`-R' is ignored for objects"
+
+ test -n "$vinfo" && \
+ func_warning "\`-version-info' is ignored for objects"
+
+ test -n "$release" && \
+ func_warning "\`-release' is ignored for objects"
+
+ case $output in
+ *.lo)
+ test -n "$objs$old_deplibs" && \
+ func_fatal_error "cannot build library object \`$output' from non-libtool objects"
+
+ libobj=$output
+ func_lo2o "$libobj"
+ obj=$func_lo2o_result
+ ;;
+ *)
+ libobj=
+ obj="$output"
+ ;;
+ esac
+
+ # Delete the old objects.
+ $opt_dry_run || $RM $obj $libobj
+
+ # Objects from convenience libraries. This assumes
+ # single-version convenience libraries. Whenever we create
+ # different ones for PIC/non-PIC, this we'll have to duplicate
+ # the extraction.
+ reload_conv_objs=
+ gentop=
+ # reload_cmds runs $LD directly, so let us get rid of
+ # -Wl from whole_archive_flag_spec and hope we can get by with
+ # turning comma into space..
+ wl=
+
+ if test -n "$convenience"; then
+ if test -n "$whole_archive_flag_spec"; then
+ eval tmp_whole_archive_flags=\"$whole_archive_flag_spec\"
+ reload_conv_objs=$reload_objs\ `$ECHO "$tmp_whole_archive_flags" | $SED 's|,| |g'`
+ else
+ gentop="$output_objdir/${obj}x"
+ func_append generated " $gentop"
+
+ func_extract_archives $gentop $convenience
+ reload_conv_objs="$reload_objs $func_extract_archives_result"
+ fi
+ fi
+
+ # If we're not building shared, we need to use non_pic_objs
+ test "$build_libtool_libs" != yes && libobjs="$non_pic_objects"
+
+ # Create the old-style object.
+ reload_objs="$objs$old_deplibs "`$ECHO "$libobjs" | $SP2NL | $SED "/\.${libext}$/d; /\.lib$/d; $lo2o" | $NL2SP`" $reload_conv_objs" ### testsuite: skip nested quoting test
+
+ output="$obj"
+ func_execute_cmds "$reload_cmds" 'exit $?'
+
+ # Exit if we aren't doing a library object file.
+ if test -z "$libobj"; then
+ if test -n "$gentop"; then
+ func_show_eval '${RM}r "$gentop"'
+ fi
+
+ exit $EXIT_SUCCESS
+ fi
+
+ if test "$build_libtool_libs" != yes; then
+ if test -n "$gentop"; then
+ func_show_eval '${RM}r "$gentop"'
+ fi
+
+ # Create an invalid libtool object if no PIC, so that we don't
+ # accidentally link it into a program.
+ # $show "echo timestamp > $libobj"
+ # $opt_dry_run || eval "echo timestamp > $libobj" || exit $?
+ exit $EXIT_SUCCESS
+ fi
+
+ if test -n "$pic_flag" || test "$pic_mode" != default; then
+ # Only do commands if we really have different PIC objects.
+ reload_objs="$libobjs $reload_conv_objs"
+ output="$libobj"
+ func_execute_cmds "$reload_cmds" 'exit $?'
+ fi
+
+ if test -n "$gentop"; then
+ func_show_eval '${RM}r "$gentop"'
+ fi
+
+ exit $EXIT_SUCCESS
+ ;;
+
+ prog)
+ case $host in
+ *cygwin*) func_stripname '' '.exe' "$output"
+ output=$func_stripname_result.exe;;
+ esac
+ test -n "$vinfo" && \
+ func_warning "\`-version-info' is ignored for programs"
+
+ test -n "$release" && \
+ func_warning "\`-release' is ignored for programs"
+
+ test "$preload" = yes \
+ && test "$dlopen_support" = unknown \
+ && test "$dlopen_self" = unknown \
+ && test "$dlopen_self_static" = unknown && \
+ func_warning "\`LT_INIT([dlopen])' not used. Assuming no dlopen support."
+
+ case $host in
+ *-*-rhapsody* | *-*-darwin1.[012])
+ # On Rhapsody replace the C library is the System framework
+ compile_deplibs=`$ECHO " $compile_deplibs" | $SED 's/ -lc / System.ltframework /'`
+ finalize_deplibs=`$ECHO " $finalize_deplibs" | $SED 's/ -lc / System.ltframework /'`
+ ;;
+ esac
+
+ case $host in
+ *-*-darwin*)
+ # Don't allow lazy linking, it breaks C++ global constructors
+ # But is supposedly fixed on 10.4 or later (yay!).
+ if test "$tagname" = CXX ; then
+ case ${MACOSX_DEPLOYMENT_TARGET-10.0} in
+ 10.[0123])
+ func_append compile_command " ${wl}-bind_at_load"
+ func_append finalize_command " ${wl}-bind_at_load"
+ ;;
+ esac
+ fi
+ # Time to change all our "foo.ltframework" stuff back to "-framework foo"
+ compile_deplibs=`$ECHO " $compile_deplibs" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'`
+ finalize_deplibs=`$ECHO " $finalize_deplibs" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'`
+ ;;
+ esac
+
+
+ # move library search paths that coincide with paths to not yet
+ # installed libraries to the beginning of the library search list
+ new_libs=
+ for path in $notinst_path; do
+ case " $new_libs " in
+ *" -L$path/$objdir "*) ;;
+ *)
+ case " $compile_deplibs " in
+ *" -L$path/$objdir "*)
+ func_append new_libs " -L$path/$objdir" ;;
+ esac
+ ;;
+ esac
+ done
+ for deplib in $compile_deplibs; do
+ case $deplib in
+ -L*)
+ case " $new_libs " in
+ *" $deplib "*) ;;
+ *) func_append new_libs " $deplib" ;;
+ esac
+ ;;
+ *) func_append new_libs " $deplib" ;;
+ esac
+ done
+ compile_deplibs="$new_libs"
+
+
+ func_append compile_command " $compile_deplibs"
+ func_append finalize_command " $finalize_deplibs"
+
+ if test -n "$rpath$xrpath"; then
+ # If the user specified any rpath flags, then add them.
+ for libdir in $rpath $xrpath; do
+ # This is the magic to use -rpath.
+ case "$finalize_rpath " in
+ *" $libdir "*) ;;
+ *) func_append finalize_rpath " $libdir" ;;
+ esac
+ done
+ fi
+
+ # Now hardcode the library paths
+ rpath=
+ hardcode_libdirs=
+ for libdir in $compile_rpath $finalize_rpath; do
+ if test -n "$hardcode_libdir_flag_spec"; then
+ if test -n "$hardcode_libdir_separator"; then
+ if test -z "$hardcode_libdirs"; then
+ hardcode_libdirs="$libdir"
+ else
+ # Just accumulate the unique libdirs.
+ case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in
+ *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*)
+ ;;
+ *)
+ func_append hardcode_libdirs "$hardcode_libdir_separator$libdir"
+ ;;
+ esac
+ fi
+ else
+ eval flag=\"$hardcode_libdir_flag_spec\"
+ func_append rpath " $flag"
+ fi
+ elif test -n "$runpath_var"; then
+ case "$perm_rpath " in
+ *" $libdir "*) ;;
+ *) func_append perm_rpath " $libdir" ;;
+ esac
+ fi
+ case $host in
+ *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-cegcc*)
+ testbindir=`${ECHO} "$libdir" | ${SED} -e 's*/lib$*/bin*'`
+ case :$dllsearchpath: in
+ *":$libdir:"*) ;;
+ ::) dllsearchpath=$libdir;;
+ *) func_append dllsearchpath ":$libdir";;
+ esac
+ case :$dllsearchpath: in
+ *":$testbindir:"*) ;;
+ ::) dllsearchpath=$testbindir;;
+ *) func_append dllsearchpath ":$testbindir";;
+ esac
+ ;;
+ esac
+ done
+ # Substitute the hardcoded libdirs into the rpath.
+ if test -n "$hardcode_libdir_separator" &&
+ test -n "$hardcode_libdirs"; then
+ libdir="$hardcode_libdirs"
+ eval rpath=\" $hardcode_libdir_flag_spec\"
+ fi
+ compile_rpath="$rpath"
+
+ rpath=
+ hardcode_libdirs=
+ for libdir in $finalize_rpath; do
+ if test -n "$hardcode_libdir_flag_spec"; then
+ if test -n "$hardcode_libdir_separator"; then
+ if test -z "$hardcode_libdirs"; then
+ hardcode_libdirs="$libdir"
+ else
+ # Just accumulate the unique libdirs.
+ case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in
+ *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*)
+ ;;
+ *)
+ func_append hardcode_libdirs "$hardcode_libdir_separator$libdir"
+ ;;
+ esac
+ fi
+ else
+ eval flag=\"$hardcode_libdir_flag_spec\"
+ func_append rpath " $flag"
+ fi
+ elif test -n "$runpath_var"; then
+ case "$finalize_perm_rpath " in
+ *" $libdir "*) ;;
+ *) func_append finalize_perm_rpath " $libdir" ;;
+ esac
+ fi
+ done
+ # Substitute the hardcoded libdirs into the rpath.
+ if test -n "$hardcode_libdir_separator" &&
+ test -n "$hardcode_libdirs"; then
+ libdir="$hardcode_libdirs"
+ eval rpath=\" $hardcode_libdir_flag_spec\"
+ fi
+ finalize_rpath="$rpath"
+
+ if test -n "$libobjs" && test "$build_old_libs" = yes; then
+ # Transform all the library objects into standard objects.
+ compile_command=`$ECHO "$compile_command" | $SP2NL | $SED "$lo2o" | $NL2SP`
+ finalize_command=`$ECHO "$finalize_command" | $SP2NL | $SED "$lo2o" | $NL2SP`
+ fi
+
+ func_generate_dlsyms "$outputname" "@PROGRAM@" "no"
+
+ # template prelinking step
+ if test -n "$prelink_cmds"; then
+ func_execute_cmds "$prelink_cmds" 'exit $?'
+ fi
+
+ wrappers_required=yes
+ case $host in
+ *cegcc* | *mingw32ce*)
+ # Disable wrappers for cegcc and mingw32ce hosts, we are cross compiling anyway.
+ wrappers_required=no
+ ;;
+ *cygwin* | *mingw* )
+ if test "$build_libtool_libs" != yes; then
+ wrappers_required=no
+ fi
+ ;;
+ *)
+ if test "$need_relink" = no || test "$build_libtool_libs" != yes; then
+ wrappers_required=no
+ fi
+ ;;
+ esac
+ if test "$wrappers_required" = no; then
+ # Replace the output file specification.
+ compile_command=`$ECHO "$compile_command" | $SED 's%@OUTPUT@%'"$output"'%g'`
+ link_command="$compile_command$compile_rpath"
+
+ # We have no uninstalled library dependencies, so finalize right now.
+ exit_status=0
+ func_show_eval "$link_command" 'exit_status=$?'
+
+ if test -n "$postlink_cmds"; then
+ func_to_tool_file "$output"
+ postlink_cmds=`func_echo_all "$postlink_cmds" | $SED -e 's%@OUTPUT@%'"$output"'%g' -e 's%@TOOL_OUTPUT@%'"$func_to_tool_file_result"'%g'`
+ func_execute_cmds "$postlink_cmds" 'exit $?'
+ fi
+
+ # Delete the generated files.
+ if test -f "$output_objdir/${outputname}S.${objext}"; then
+ func_show_eval '$RM "$output_objdir/${outputname}S.${objext}"'
+ fi
+
+ exit $exit_status
+ fi
+
+ if test -n "$compile_shlibpath$finalize_shlibpath"; then
+ compile_command="$shlibpath_var=\"$compile_shlibpath$finalize_shlibpath\$$shlibpath_var\" $compile_command"
+ fi
+ if test -n "$finalize_shlibpath"; then
+ finalize_command="$shlibpath_var=\"$finalize_shlibpath\$$shlibpath_var\" $finalize_command"
+ fi
+
+ compile_var=
+ finalize_var=
+ if test -n "$runpath_var"; then
+ if test -n "$perm_rpath"; then
+ # We should set the runpath_var.
+ rpath=
+ for dir in $perm_rpath; do
+ func_append rpath "$dir:"
+ done
+ compile_var="$runpath_var=\"$rpath\$$runpath_var\" "
+ fi
+ if test -n "$finalize_perm_rpath"; then
+ # We should set the runpath_var.
+ rpath=
+ for dir in $finalize_perm_rpath; do
+ func_append rpath "$dir:"
+ done
+ finalize_var="$runpath_var=\"$rpath\$$runpath_var\" "
+ fi
+ fi
+
+ if test "$no_install" = yes; then
+ # We don't need to create a wrapper script.
+ link_command="$compile_var$compile_command$compile_rpath"
+ # Replace the output file specification.
+ link_command=`$ECHO "$link_command" | $SED 's%@OUTPUT@%'"$output"'%g'`
+ # Delete the old output file.
+ $opt_dry_run || $RM $output
+ # Link the executable and exit
+ func_show_eval "$link_command" 'exit $?'
+
+ if test -n "$postlink_cmds"; then
+ func_to_tool_file "$output"
+ postlink_cmds=`func_echo_all "$postlink_cmds" | $SED -e 's%@OUTPUT@%'"$output"'%g' -e 's%@TOOL_OUTPUT@%'"$func_to_tool_file_result"'%g'`
+ func_execute_cmds "$postlink_cmds" 'exit $?'
+ fi
+
+ exit $EXIT_SUCCESS
+ fi
+
+ if test "$hardcode_action" = relink; then
+ # Fast installation is not supported
+ link_command="$compile_var$compile_command$compile_rpath"
+ relink_command="$finalize_var$finalize_command$finalize_rpath"
+
+ func_warning "this platform does not like uninstalled shared libraries"
+ func_warning "\`$output' will be relinked during installation"
+ else
+ if test "$fast_install" != no; then
+ link_command="$finalize_var$compile_command$finalize_rpath"
+ if test "$fast_install" = yes; then
+ relink_command=`$ECHO "$compile_var$compile_command$compile_rpath" | $SED 's%@OUTPUT@%\$progdir/\$file%g'`
+ else
+ # fast_install is set to needless
+ relink_command=
+ fi
+ else
+ link_command="$compile_var$compile_command$compile_rpath"
+ relink_command="$finalize_var$finalize_command$finalize_rpath"
+ fi
+ fi
+
+ # Replace the output file specification.
+ link_command=`$ECHO "$link_command" | $SED 's%@OUTPUT@%'"$output_objdir/$outputname"'%g'`
+
+ # Delete the old output files.
+ $opt_dry_run || $RM $output $output_objdir/$outputname $output_objdir/lt-$outputname
+
+ func_show_eval "$link_command" 'exit $?'
+
+ if test -n "$postlink_cmds"; then
+ func_to_tool_file "$output_objdir/$outputname"
+ postlink_cmds=`func_echo_all "$postlink_cmds" | $SED -e 's%@OUTPUT@%'"$output_objdir/$outputname"'%g' -e 's%@TOOL_OUTPUT@%'"$func_to_tool_file_result"'%g'`
+ func_execute_cmds "$postlink_cmds" 'exit $?'
+ fi
+
+ # Now create the wrapper script.
+ func_verbose "creating $output"
+
+ # Quote the relink command for shipping.
+ if test -n "$relink_command"; then
+ # Preserve any variables that may affect compiler behavior
+ for var in $variables_saved_for_relink; do
+ if eval test -z \"\${$var+set}\"; then
+ relink_command="{ test -z \"\${$var+set}\" || $lt_unset $var || { $var=; export $var; }; }; $relink_command"
+ elif eval var_value=\$$var; test -z "$var_value"; then
+ relink_command="$var=; export $var; $relink_command"
+ else
+ func_quote_for_eval "$var_value"
+ relink_command="$var=$func_quote_for_eval_result; export $var; $relink_command"
+ fi
+ done
+ relink_command="(cd `pwd`; $relink_command)"
+ relink_command=`$ECHO "$relink_command" | $SED "$sed_quote_subst"`
+ fi
+
+ # Only actually do things if not in dry run mode.
+ $opt_dry_run || {
+ # win32 will think the script is a binary if it has
+ # a .exe suffix, so we strip it off here.
+ case $output in
+ *.exe) func_stripname '' '.exe' "$output"
+ output=$func_stripname_result ;;
+ esac
+ # test for cygwin because mv fails w/o .exe extensions
+ case $host in
+ *cygwin*)
+ exeext=.exe
+ func_stripname '' '.exe' "$outputname"
+ outputname=$func_stripname_result ;;
+ *) exeext= ;;
+ esac
+ case $host in
+ *cygwin* | *mingw* )
+ func_dirname_and_basename "$output" "" "."
+ output_name=$func_basename_result
+ output_path=$func_dirname_result
+ cwrappersource="$output_path/$objdir/lt-$output_name.c"
+ cwrapper="$output_path/$output_name.exe"
+ $RM $cwrappersource $cwrapper
+ trap "$RM $cwrappersource $cwrapper; exit $EXIT_FAILURE" 1 2 15
+
+ func_emit_cwrapperexe_src > $cwrappersource
+
+ # The wrapper executable is built using the $host compiler,
+ # because it contains $host paths and files. If cross-
+ # compiling, it, like the target executable, must be
+ # executed on the $host or under an emulation environment.
+ $opt_dry_run || {
+ $LTCC $LTCFLAGS -o $cwrapper $cwrappersource
+ $STRIP $cwrapper
+ }
+
+ # Now, create the wrapper script for func_source use:
+ func_ltwrapper_scriptname $cwrapper
+ $RM $func_ltwrapper_scriptname_result
+ trap "$RM $func_ltwrapper_scriptname_result; exit $EXIT_FAILURE" 1 2 15
+ $opt_dry_run || {
+ # note: this script will not be executed, so do not chmod.
+ if test "x$build" = "x$host" ; then
+ $cwrapper --lt-dump-script > $func_ltwrapper_scriptname_result
+ else
+ func_emit_wrapper no > $func_ltwrapper_scriptname_result
+ fi
+ }
+ ;;
+ * )
+ $RM $output
+ trap "$RM $output; exit $EXIT_FAILURE" 1 2 15
+
+ func_emit_wrapper no > $output
+ chmod +x $output
+ ;;
+ esac
+ }
+ exit $EXIT_SUCCESS
+ ;;
+ esac
+
+ # See if we need to build an old-fashioned archive.
+ for oldlib in $oldlibs; do
+
+ if test "$build_libtool_libs" = convenience; then
+ oldobjs="$libobjs_save $symfileobj"
+ addlibs="$convenience"
+ build_libtool_libs=no
+ else
+ if test "$build_libtool_libs" = module; then
+ oldobjs="$libobjs_save"
+ build_libtool_libs=no
+ else
+ oldobjs="$old_deplibs $non_pic_objects"
+ if test "$preload" = yes && test -f "$symfileobj"; then
+ func_append oldobjs " $symfileobj"
+ fi
+ fi
+ addlibs="$old_convenience"
+ fi
+
+ if test -n "$addlibs"; then
+ gentop="$output_objdir/${outputname}x"
+ func_append generated " $gentop"
+
+ func_extract_archives $gentop $addlibs
+ func_append oldobjs " $func_extract_archives_result"
+ fi
+
+ # Do each command in the archive commands.
+ if test -n "$old_archive_from_new_cmds" && test "$build_libtool_libs" = yes; then
+ cmds=$old_archive_from_new_cmds
+ else
+
+ # Add any objects from preloaded convenience libraries
+ if test -n "$dlprefiles"; then
+ gentop="$output_objdir/${outputname}x"
+ func_append generated " $gentop"
+
+ func_extract_archives $gentop $dlprefiles
+ func_append oldobjs " $func_extract_archives_result"
+ fi
+
+ # POSIX demands no paths to be encoded in archives. We have
+ # to avoid creating archives with duplicate basenames if we
+ # might have to extract them afterwards, e.g., when creating a
+ # static archive out of a convenience library, or when linking
+ # the entirety of a libtool archive into another (currently
+ # not supported by libtool).
+ if (for obj in $oldobjs
+ do
+ func_basename "$obj"
+ $ECHO "$func_basename_result"
+ done | sort | sort -uc >/dev/null 2>&1); then
+ :
+ else
+ echo "copying selected object files to avoid basename conflicts..."
+ gentop="$output_objdir/${outputname}x"
+ func_append generated " $gentop"
+ func_mkdir_p "$gentop"
+ save_oldobjs=$oldobjs
+ oldobjs=
+ counter=1
+ for obj in $save_oldobjs
+ do
+ func_basename "$obj"
+ objbase="$func_basename_result"
+ case " $oldobjs " in
+ " ") oldobjs=$obj ;;
+ *[\ /]"$objbase "*)
+ while :; do
+ # Make sure we don't pick an alternate name that also
+ # overlaps.
+ newobj=lt$counter-$objbase
+ func_arith $counter + 1
+ counter=$func_arith_result
+ case " $oldobjs " in
+ *[\ /]"$newobj "*) ;;
+ *) if test ! -f "$gentop/$newobj"; then break; fi ;;
+ esac
+ done
+ func_show_eval "ln $obj $gentop/$newobj || cp $obj $gentop/$newobj"
+ func_append oldobjs " $gentop/$newobj"
+ ;;
+ *) func_append oldobjs " $obj" ;;
+ esac
+ done
+ fi
+ eval cmds=\"$old_archive_cmds\"
+
+ func_len " $cmds"
+ len=$func_len_result
+ if test "$len" -lt "$max_cmd_len" || test "$max_cmd_len" -le -1; then
+ cmds=$old_archive_cmds
+ elif test -n "$archiver_list_spec"; then
+ func_verbose "using command file archive linking..."
+ for obj in $oldobjs
+ do
+ func_to_tool_file "$obj"
+ $ECHO "$func_to_tool_file_result"
+ done > $output_objdir/$libname.libcmd
+ func_to_tool_file "$output_objdir/$libname.libcmd"
+ oldobjs=" $archiver_list_spec$func_to_tool_file_result"
+ cmds=$old_archive_cmds
+ else
+ # the command line is too long to link in one step, link in parts
+ func_verbose "using piecewise archive linking..."
+ save_RANLIB=$RANLIB
+ RANLIB=:
+ objlist=
+ concat_cmds=
+ save_oldobjs=$oldobjs
+ oldobjs=
+ # Is there a better way of finding the last object in the list?
+ for obj in $save_oldobjs
+ do
+ last_oldobj=$obj
+ done
+ eval test_cmds=\"$old_archive_cmds\"
+ func_len " $test_cmds"
+ len0=$func_len_result
+ len=$len0
+ for obj in $save_oldobjs
+ do
+ func_len " $obj"
+ func_arith $len + $func_len_result
+ len=$func_arith_result
+ func_append objlist " $obj"
+ if test "$len" -lt "$max_cmd_len"; then
+ :
+ else
+ # the above command should be used before it gets too long
+ oldobjs=$objlist
+ if test "$obj" = "$last_oldobj" ; then
+ RANLIB=$save_RANLIB
+ fi
+ test -z "$concat_cmds" || concat_cmds=$concat_cmds~
+ eval concat_cmds=\"\${concat_cmds}$old_archive_cmds\"
+ objlist=
+ len=$len0
+ fi
+ done
+ RANLIB=$save_RANLIB
+ oldobjs=$objlist
+ if test "X$oldobjs" = "X" ; then
+ eval cmds=\"\$concat_cmds\"
+ else
+ eval cmds=\"\$concat_cmds~\$old_archive_cmds\"
+ fi
+ fi
+ fi
+ func_execute_cmds "$cmds" 'exit $?'
+ done
+
+ test -n "$generated" && \
+ func_show_eval "${RM}r$generated"
+
+ # Now create the libtool archive.
+ case $output in
+ *.la)
+ old_library=
+ test "$build_old_libs" = yes && old_library="$libname.$libext"
+ func_verbose "creating $output"
+
+ # Preserve any variables that may affect compiler behavior
+ for var in $variables_saved_for_relink; do
+ if eval test -z \"\${$var+set}\"; then
+ relink_command="{ test -z \"\${$var+set}\" || $lt_unset $var || { $var=; export $var; }; }; $relink_command"
+ elif eval var_value=\$$var; test -z "$var_value"; then
+ relink_command="$var=; export $var; $relink_command"
+ else
+ func_quote_for_eval "$var_value"
+ relink_command="$var=$func_quote_for_eval_result; export $var; $relink_command"
+ fi
+ done
+ # Quote the link command for shipping.
+ relink_command="(cd `pwd`; $SHELL $progpath $preserve_args --mode=relink $libtool_args @inst_prefix_dir@)"
+ relink_command=`$ECHO "$relink_command" | $SED "$sed_quote_subst"`
+ if test "$hardcode_automatic" = yes ; then
+ relink_command=
+ fi
+
+ # Only create the output if not a dry run.
+ $opt_dry_run || {
+ for installed in no yes; do
+ if test "$installed" = yes; then
+ if test -z "$install_libdir"; then
+ break
+ fi
+ output="$output_objdir/$outputname"i
+ # Replace all uninstalled libtool libraries with the installed ones
+ newdependency_libs=
+ for deplib in $dependency_libs; do
+ case $deplib in
+ *.la)
+ func_basename "$deplib"
+ name="$func_basename_result"
+ eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $deplib`
+ test -z "$libdir" && \
+ func_fatal_error "\`$deplib' is not a valid libtool archive"
+ func_append newdependency_libs " ${lt_sysroot:+=}$libdir/$name"
+ ;;
+ -L*)
+ func_stripname -L '' "$deplib"
+ func_replace_sysroot "$func_stripname_result"
+ func_append newdependency_libs " -L$func_replace_sysroot_result"
+ ;;
+ -R*)
+ func_stripname -R '' "$deplib"
+ func_replace_sysroot "$func_stripname_result"
+ func_append newdependency_libs " -R$func_replace_sysroot_result"
+ ;;
+ *) func_append newdependency_libs " $deplib" ;;
+ esac
+ done
+ dependency_libs="$newdependency_libs"
+ newdlfiles=
+
+ for lib in $dlfiles; do
+ case $lib in
+ *.la)
+ func_basename "$lib"
+ name="$func_basename_result"
+ eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $lib`
+ test -z "$libdir" && \
+ func_fatal_error "\`$lib' is not a valid libtool archive"
+ func_append newdlfiles " ${lt_sysroot:+=}$libdir/$name"
+ ;;
+ *) func_append newdlfiles " $lib" ;;
+ esac
+ done
+ dlfiles="$newdlfiles"
+ newdlprefiles=
+ for lib in $dlprefiles; do
+ case $lib in
+ *.la)
+ # Only pass preopened files to the pseudo-archive (for
+ # eventual linking with the app. that links it) if we
+ # didn't already link the preopened objects directly into
+ # the library:
+ func_basename "$lib"
+ name="$func_basename_result"
+ eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $lib`
+ test -z "$libdir" && \
+ func_fatal_error "\`$lib' is not a valid libtool archive"
+ func_append newdlprefiles " ${lt_sysroot:+=}$libdir/$name"
+ ;;
+ esac
+ done
+ dlprefiles="$newdlprefiles"
+ else
+ newdlfiles=
+ for lib in $dlfiles; do
+ case $lib in
+ [\\/]* | [A-Za-z]:[\\/]*) abs="$lib" ;;
+ *) abs=`pwd`"/$lib" ;;
+ esac
+ func_append newdlfiles " $abs"
+ done
+ dlfiles="$newdlfiles"
+ newdlprefiles=
+ for lib in $dlprefiles; do
+ case $lib in
+ [\\/]* | [A-Za-z]:[\\/]*) abs="$lib" ;;
+ *) abs=`pwd`"/$lib" ;;
+ esac
+ func_append newdlprefiles " $abs"
+ done
+ dlprefiles="$newdlprefiles"
+ fi
+ $RM $output
+ # place dlname in correct position for cygwin
+ # In fact, it would be nice if we could use this code for all target
+ # systems that can't hard-code library paths into their executables
+ # and that have no shared library path variable independent of PATH,
+ # but it turns out we can't easily determine that from inspecting
+ # libtool variables, so we have to hard-code the OSs to which it
+ # applies here; at the moment, that means platforms that use the PE
+ # object format with DLL files. See the long comment at the top of
+ # tests/bindir.at for full details.
+ tdlname=$dlname
+ case $host,$output,$installed,$module,$dlname in
+ *cygwin*,*lai,yes,no,*.dll | *mingw*,*lai,yes,no,*.dll | *cegcc*,*lai,yes,no,*.dll)
+ # If a -bindir argument was supplied, place the dll there.
+ if test "x$bindir" != x ;
+ then
+ func_relative_path "$install_libdir" "$bindir"
+ tdlname=$func_relative_path_result$dlname
+ else
+ # Otherwise fall back on heuristic.
+ tdlname=../bin/$dlname
+ fi
+ ;;
+ esac
+ $ECHO > $output "\
+# $outputname - a libtool library file
+# Generated by $PROGRAM (GNU $PACKAGE$TIMESTAMP) $VERSION
+#
+# Please DO NOT delete this file!
+# It is necessary for linking the library.
+
+# The name that we can dlopen(3).
+dlname='$tdlname'
+
+# Names of this library.
+library_names='$library_names'
+
+# The name of the static archive.
+old_library='$old_library'
+
+# Linker flags that can not go in dependency_libs.
+inherited_linker_flags='$new_inherited_linker_flags'
+
+# Libraries that this one depends upon.
+dependency_libs='$dependency_libs'
+
+# Names of additional weak libraries provided by this library
+weak_library_names='$weak_libs'
+
+# Version information for $libname.
+current=$current
+age=$age
+revision=$revision
+
+# Is this an already installed library?
+installed=$installed
+
+# Should we warn about portability when linking against -modules?
+shouldnotlink=$module
+
+# Files to dlopen/dlpreopen
+dlopen='$dlfiles'
+dlpreopen='$dlprefiles'
+
+# Directory that this library needs to be installed in:
+libdir='$install_libdir'"
+ if test "$installed" = no && test "$need_relink" = yes; then
+ $ECHO >> $output "\
+relink_command=\"$relink_command\""
+ fi
+ done
+ }
+
+ # Do a symbolic link so that the libtool archive can be found in
+ # LD_LIBRARY_PATH before the program is installed.
+ func_show_eval '( cd "$output_objdir" && $RM "$outputname" && $LN_S "../$outputname" "$outputname" )' 'exit $?'
+ ;;
+ esac
+ exit $EXIT_SUCCESS
+}
+
+{ test "$opt_mode" = link || test "$opt_mode" = relink; } &&
+ func_mode_link ${1+"$@"}
+
+
+# func_mode_uninstall arg...
+func_mode_uninstall ()
+{
+ $opt_debug
+ RM="$nonopt"
+ files=
+ rmforce=
+ exit_status=0
+
+ # This variable tells wrapper scripts just to set variables rather
+ # than running their programs.
+ libtool_install_magic="$magic"
+
+ for arg
+ do
+ case $arg in
+ -f) func_append RM " $arg"; rmforce=yes ;;
+ -*) func_append RM " $arg" ;;
+ *) func_append files " $arg" ;;
+ esac
+ done
+
+ test -z "$RM" && \
+ func_fatal_help "you must specify an RM program"
+
+ rmdirs=
+
+ for file in $files; do
+ func_dirname "$file" "" "."
+ dir="$func_dirname_result"
+ if test "X$dir" = X.; then
+ odir="$objdir"
+ else
+ odir="$dir/$objdir"
+ fi
+ func_basename "$file"
+ name="$func_basename_result"
+ test "$opt_mode" = uninstall && odir="$dir"
+
+ # Remember odir for removal later, being careful to avoid duplicates
+ if test "$opt_mode" = clean; then
+ case " $rmdirs " in
+ *" $odir "*) ;;
+ *) func_append rmdirs " $odir" ;;
+ esac
+ fi
+
+ # Don't error if the file doesn't exist and rm -f was used.
+ if { test -L "$file"; } >/dev/null 2>&1 ||
+ { test -h "$file"; } >/dev/null 2>&1 ||
+ test -f "$file"; then
+ :
+ elif test -d "$file"; then
+ exit_status=1
+ continue
+ elif test "$rmforce" = yes; then
+ continue
+ fi
+
+ rmfiles="$file"
+
+ case $name in
+ *.la)
+ # Possibly a libtool archive, so verify it.
+ if func_lalib_p "$file"; then
+ func_source $dir/$name
+
+ # Delete the libtool libraries and symlinks.
+ for n in $library_names; do
+ func_append rmfiles " $odir/$n"
+ done
+ test -n "$old_library" && func_append rmfiles " $odir/$old_library"
+
+ case "$opt_mode" in
+ clean)
+ case " $library_names " in
+ *" $dlname "*) ;;
+ *) test -n "$dlname" && func_append rmfiles " $odir/$dlname" ;;
+ esac
+ test -n "$libdir" && func_append rmfiles " $odir/$name $odir/${name}i"
+ ;;
+ uninstall)
+ if test -n "$library_names"; then
+ # Do each command in the postuninstall commands.
+ func_execute_cmds "$postuninstall_cmds" 'test "$rmforce" = yes || exit_status=1'
+ fi
+
+ if test -n "$old_library"; then
+ # Do each command in the old_postuninstall commands.
+ func_execute_cmds "$old_postuninstall_cmds" 'test "$rmforce" = yes || exit_status=1'
+ fi
+ # FIXME: should reinstall the best remaining shared library.
+ ;;
+ esac
+ fi
+ ;;
+
+ *.lo)
+ # Possibly a libtool object, so verify it.
+ if func_lalib_p "$file"; then
+
+ # Read the .lo file
+ func_source $dir/$name
+
+ # Add PIC object to the list of files to remove.
+ if test -n "$pic_object" &&
+ test "$pic_object" != none; then
+ func_append rmfiles " $dir/$pic_object"
+ fi
+
+ # Add non-PIC object to the list of files to remove.
+ if test -n "$non_pic_object" &&
+ test "$non_pic_object" != none; then
+ func_append rmfiles " $dir/$non_pic_object"
+ fi
+ fi
+ ;;
+
+ *)
+ if test "$opt_mode" = clean ; then
+ noexename=$name
+ case $file in
+ *.exe)
+ func_stripname '' '.exe' "$file"
+ file=$func_stripname_result
+ func_stripname '' '.exe' "$name"
+ noexename=$func_stripname_result
+ # $file with .exe has already been added to rmfiles,
+ # add $file without .exe
+ func_append rmfiles " $file"
+ ;;
+ esac
+ # Do a test to see if this is a libtool program.
+ if func_ltwrapper_p "$file"; then
+ if func_ltwrapper_executable_p "$file"; then
+ func_ltwrapper_scriptname "$file"
+ relink_command=
+ func_source $func_ltwrapper_scriptname_result
+ func_append rmfiles " $func_ltwrapper_scriptname_result"
+ else
+ relink_command=
+ func_source $dir/$noexename
+ fi
+
+ # note $name still contains .exe if it was in $file originally
+ # as does the version of $file that was added into $rmfiles
+ func_append rmfiles " $odir/$name $odir/${name}S.${objext}"
+ if test "$fast_install" = yes && test -n "$relink_command"; then
+ func_append rmfiles " $odir/lt-$name"
+ fi
+ if test "X$noexename" != "X$name" ; then
+ func_append rmfiles " $odir/lt-${noexename}.c"
+ fi
+ fi
+ fi
+ ;;
+ esac
+ func_show_eval "$RM $rmfiles" 'exit_status=1'
+ done
+
+ # Try to remove the ${objdir}s in the directories where we deleted files
+ for dir in $rmdirs; do
+ if test -d "$dir"; then
+ func_show_eval "rmdir $dir >/dev/null 2>&1"
+ fi
+ done
+
+ exit $exit_status
+}
+
+{ test "$opt_mode" = uninstall || test "$opt_mode" = clean; } &&
+ func_mode_uninstall ${1+"$@"}
+
+test -z "$opt_mode" && {
+ help="$generic_help"
+ func_fatal_help "you must specify a MODE"
+}
+
+test -z "$exec_cmd" && \
+ func_fatal_help "invalid operation mode \`$opt_mode'"
+
+if test -n "$exec_cmd"; then
+ eval exec "$exec_cmd"
+ exit $EXIT_FAILURE
+fi
+
+exit $exit_status
+
+
+# The TAGs below are defined such that we never get into a situation
+# in which we disable both kinds of libraries. Given conflicting
+# choices, we go for a static library, that is the most portable,
+# since we can't tell whether shared libraries were disabled because
+# the user asked for that or because the platform doesn't support
+# them. This is particularly important on AIX, because we don't
+# support having both static and shared libraries enabled at the same
+# time on that platform, so we default to a shared-only configuration.
+# If a disable-shared tag is given, we'll fallback to a static-only
+# configuration. But we'll never go from static-only to shared-only.
+
+# ### BEGIN LIBTOOL TAG CONFIG: disable-shared
+build_libtool_libs=no
+build_old_libs=yes
+# ### END LIBTOOL TAG CONFIG: disable-shared
+
+# ### BEGIN LIBTOOL TAG CONFIG: disable-static
+build_old_libs=`case $build_libtool_libs in yes) echo no;; *) echo yes;; esac`
+# ### END LIBTOOL TAG CONFIG: disable-static
+
+# Local Variables:
+# mode:shell-script
+# sh-indentation:2
+# End:
+# vi:sw=2
+