diff options
Diffstat (limited to 'mesalib/src/glsl/ast_to_hir.cpp')
| -rw-r--r-- | mesalib/src/glsl/ast_to_hir.cpp | 6960 |
1 files changed, 3499 insertions, 3461 deletions
diff --git a/mesalib/src/glsl/ast_to_hir.cpp b/mesalib/src/glsl/ast_to_hir.cpp index fd1f0b49f..b8a812d94 100644 --- a/mesalib/src/glsl/ast_to_hir.cpp +++ b/mesalib/src/glsl/ast_to_hir.cpp @@ -1,3461 +1,3499 @@ -/* - * Copyright © 2010 Intel Corporation - * - * Permission is hereby granted, free of charge, to any person obtaining a - * copy of this software and associated documentation files (the "Software"), - * to deal in the Software without restriction, including without limitation - * the rights to use, copy, modify, merge, publish, distribute, sublicense, - * and/or sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following conditions: - * - * The above copyright notice and this permission notice (including the next - * paragraph) shall be included in all copies or substantial portions of the - * Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR - * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, - * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL - * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER - * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER - * DEALINGS IN THE SOFTWARE. - */ - -/** - * \file ast_to_hir.c - * Convert abstract syntax to to high-level intermediate reprensentation (HIR). - * - * During the conversion to HIR, the majority of the symantic checking is - * preformed on the program. This includes: - * - * * Symbol table management - * * Type checking - * * Function binding - * - * The majority of this work could be done during parsing, and the parser could - * probably generate HIR directly. However, this results in frequent changes - * to the parser code. Since we do not assume that every system this complier - * is built on will have Flex and Bison installed, we have to store the code - * generated by these tools in our version control system. In other parts of - * the system we've seen problems where a parser was changed but the generated - * code was not committed, merge conflicts where created because two developers - * had slightly different versions of Bison installed, etc. - * - * I have also noticed that running Bison generated parsers in GDB is very - * irritating. When you get a segfault on '$$ = $1->foo', you can't very - * well 'print $1' in GDB. - * - * As a result, my preference is to put as little C code as possible in the - * parser (and lexer) sources. - */ - -#include "main/core.h" /* for struct gl_extensions */ -#include "glsl_symbol_table.h" -#include "glsl_parser_extras.h" -#include "ast.h" -#include "glsl_types.h" -#include "ir.h" - -void -_mesa_ast_to_hir(exec_list *instructions, struct _mesa_glsl_parse_state *state) -{ - _mesa_glsl_initialize_variables(instructions, state); - _mesa_glsl_initialize_functions(state); - - state->symbols->language_version = state->language_version; - - state->current_function = NULL; - - /* Section 4.2 of the GLSL 1.20 specification states: - * "The built-in functions are scoped in a scope outside the global scope - * users declare global variables in. That is, a shader's global scope, - * available for user-defined functions and global variables, is nested - * inside the scope containing the built-in functions." - * - * Since built-in functions like ftransform() access built-in variables, - * it follows that those must be in the outer scope as well. - * - * We push scope here to create this nesting effect...but don't pop. - * This way, a shader's globals are still in the symbol table for use - * by the linker. - */ - state->symbols->push_scope(); - - foreach_list_typed (ast_node, ast, link, & state->translation_unit) - ast->hir(instructions, state); -} - - -/** - * If a conversion is available, convert one operand to a different type - * - * The \c from \c ir_rvalue is converted "in place". - * - * \param to Type that the operand it to be converted to - * \param from Operand that is being converted - * \param state GLSL compiler state - * - * \return - * If a conversion is possible (or unnecessary), \c true is returned. - * Otherwise \c false is returned. - */ -bool -apply_implicit_conversion(const glsl_type *to, ir_rvalue * &from, - struct _mesa_glsl_parse_state *state) -{ - void *ctx = state; - if (to->base_type == from->type->base_type) - return true; - - /* This conversion was added in GLSL 1.20. If the compilation mode is - * GLSL 1.10, the conversion is skipped. - */ - if (state->language_version < 120) - return false; - - /* From page 27 (page 33 of the PDF) of the GLSL 1.50 spec: - * - * "There are no implicit array or structure conversions. For - * example, an array of int cannot be implicitly converted to an - * array of float. There are no implicit conversions between - * signed and unsigned integers." - */ - /* FINISHME: The above comment is partially a lie. There is int/uint - * FINISHME: conversion for immediate constants. - */ - if (!to->is_float() || !from->type->is_numeric()) - return false; - - /* Convert to a floating point type with the same number of components - * as the original type - i.e. int to float, not int to vec4. - */ - to = glsl_type::get_instance(GLSL_TYPE_FLOAT, from->type->vector_elements, - from->type->matrix_columns); - - switch (from->type->base_type) { - case GLSL_TYPE_INT: - from = new(ctx) ir_expression(ir_unop_i2f, to, from, NULL); - break; - case GLSL_TYPE_UINT: - from = new(ctx) ir_expression(ir_unop_u2f, to, from, NULL); - break; - case GLSL_TYPE_BOOL: - from = new(ctx) ir_expression(ir_unop_b2f, to, from, NULL); - break; - default: - assert(0); - } - - return true; -} - - -static const struct glsl_type * -arithmetic_result_type(ir_rvalue * &value_a, ir_rvalue * &value_b, - bool multiply, - struct _mesa_glsl_parse_state *state, YYLTYPE *loc) -{ - const glsl_type *type_a = value_a->type; - const glsl_type *type_b = value_b->type; - - /* From GLSL 1.50 spec, page 56: - * - * "The arithmetic binary operators add (+), subtract (-), - * multiply (*), and divide (/) operate on integer and - * floating-point scalars, vectors, and matrices." - */ - if (!type_a->is_numeric() || !type_b->is_numeric()) { - _mesa_glsl_error(loc, state, - "Operands to arithmetic operators must be numeric"); - return glsl_type::error_type; - } - - - /* "If one operand is floating-point based and the other is - * not, then the conversions from Section 4.1.10 "Implicit - * Conversions" are applied to the non-floating-point-based operand." - */ - if (!apply_implicit_conversion(type_a, value_b, state) - && !apply_implicit_conversion(type_b, value_a, state)) { - _mesa_glsl_error(loc, state, - "Could not implicitly convert operands to " - "arithmetic operator"); - return glsl_type::error_type; - } - type_a = value_a->type; - type_b = value_b->type; - - /* "If the operands are integer types, they must both be signed or - * both be unsigned." - * - * From this rule and the preceeding conversion it can be inferred that - * both types must be GLSL_TYPE_FLOAT, or GLSL_TYPE_UINT, or GLSL_TYPE_INT. - * The is_numeric check above already filtered out the case where either - * type is not one of these, so now the base types need only be tested for - * equality. - */ - if (type_a->base_type != type_b->base_type) { - _mesa_glsl_error(loc, state, - "base type mismatch for arithmetic operator"); - return glsl_type::error_type; - } - - /* "All arithmetic binary operators result in the same fundamental type - * (signed integer, unsigned integer, or floating-point) as the - * operands they operate on, after operand type conversion. After - * conversion, the following cases are valid - * - * * The two operands are scalars. In this case the operation is - * applied, resulting in a scalar." - */ - if (type_a->is_scalar() && type_b->is_scalar()) - return type_a; - - /* "* One operand is a scalar, and the other is a vector or matrix. - * In this case, the scalar operation is applied independently to each - * component of the vector or matrix, resulting in the same size - * vector or matrix." - */ - if (type_a->is_scalar()) { - if (!type_b->is_scalar()) - return type_b; - } else if (type_b->is_scalar()) { - return type_a; - } - - /* All of the combinations of <scalar, scalar>, <vector, scalar>, - * <scalar, vector>, <scalar, matrix>, and <matrix, scalar> have been - * handled. - */ - assert(!type_a->is_scalar()); - assert(!type_b->is_scalar()); - - /* "* The two operands are vectors of the same size. In this case, the - * operation is done component-wise resulting in the same size - * vector." - */ - if (type_a->is_vector() && type_b->is_vector()) { - if (type_a == type_b) { - return type_a; - } else { - _mesa_glsl_error(loc, state, - "vector size mismatch for arithmetic operator"); - return glsl_type::error_type; - } - } - - /* All of the combinations of <scalar, scalar>, <vector, scalar>, - * <scalar, vector>, <scalar, matrix>, <matrix, scalar>, and - * <vector, vector> have been handled. At least one of the operands must - * be matrix. Further, since there are no integer matrix types, the base - * type of both operands must be float. - */ - assert(type_a->is_matrix() || type_b->is_matrix()); - assert(type_a->base_type == GLSL_TYPE_FLOAT); - assert(type_b->base_type == GLSL_TYPE_FLOAT); - - /* "* The operator is add (+), subtract (-), or divide (/), and the - * operands are matrices with the same number of rows and the same - * number of columns. In this case, the operation is done component- - * wise resulting in the same size matrix." - * * The operator is multiply (*), where both operands are matrices or - * one operand is a vector and the other a matrix. A right vector - * operand is treated as a column vector and a left vector operand as a - * row vector. In all these cases, it is required that the number of - * columns of the left operand is equal to the number of rows of the - * right operand. Then, the multiply (*) operation does a linear - * algebraic multiply, yielding an object that has the same number of - * rows as the left operand and the same number of columns as the right - * operand. Section 5.10 "Vector and Matrix Operations" explains in - * more detail how vectors and matrices are operated on." - */ - if (! multiply) { - if (type_a == type_b) - return type_a; - } else { - if (type_a->is_matrix() && type_b->is_matrix()) { - /* Matrix multiply. The columns of A must match the rows of B. Given - * the other previously tested constraints, this means the vector type - * of a row from A must be the same as the vector type of a column from - * B. - */ - if (type_a->row_type() == type_b->column_type()) { - /* The resulting matrix has the number of columns of matrix B and - * the number of rows of matrix A. We get the row count of A by - * looking at the size of a vector that makes up a column. The - * transpose (size of a row) is done for B. - */ - const glsl_type *const type = - glsl_type::get_instance(type_a->base_type, - type_a->column_type()->vector_elements, - type_b->row_type()->vector_elements); - assert(type != glsl_type::error_type); - - return type; - } - } else if (type_a->is_matrix()) { - /* A is a matrix and B is a column vector. Columns of A must match - * rows of B. Given the other previously tested constraints, this - * means the vector type of a row from A must be the same as the - * vector the type of B. - */ - if (type_a->row_type() == type_b) { - /* The resulting vector has a number of elements equal to - * the number of rows of matrix A. */ - const glsl_type *const type = - glsl_type::get_instance(type_a->base_type, - type_a->column_type()->vector_elements, - 1); - assert(type != glsl_type::error_type); - - return type; - } - } else { - assert(type_b->is_matrix()); - - /* A is a row vector and B is a matrix. Columns of A must match rows - * of B. Given the other previously tested constraints, this means - * the type of A must be the same as the vector type of a column from - * B. - */ - if (type_a == type_b->column_type()) { - /* The resulting vector has a number of elements equal to - * the number of columns of matrix B. */ - const glsl_type *const type = - glsl_type::get_instance(type_a->base_type, - type_b->row_type()->vector_elements, - 1); - assert(type != glsl_type::error_type); - - return type; - } - } - - _mesa_glsl_error(loc, state, "size mismatch for matrix multiplication"); - return glsl_type::error_type; - } - - - /* "All other cases are illegal." - */ - _mesa_glsl_error(loc, state, "type mismatch"); - return glsl_type::error_type; -} - - -static const struct glsl_type * -unary_arithmetic_result_type(const struct glsl_type *type, - struct _mesa_glsl_parse_state *state, YYLTYPE *loc) -{ - /* From GLSL 1.50 spec, page 57: - * - * "The arithmetic unary operators negate (-), post- and pre-increment - * and decrement (-- and ++) operate on integer or floating-point - * values (including vectors and matrices). All unary operators work - * component-wise on their operands. These result with the same type - * they operated on." - */ - if (!type->is_numeric()) { - _mesa_glsl_error(loc, state, - "Operands to arithmetic operators must be numeric"); - return glsl_type::error_type; - } - - return type; -} - -/** - * \brief Return the result type of a bit-logic operation. - * - * If the given types to the bit-logic operator are invalid, return - * glsl_type::error_type. - * - * \param type_a Type of LHS of bit-logic op - * \param type_b Type of RHS of bit-logic op - */ -static const struct glsl_type * -bit_logic_result_type(const struct glsl_type *type_a, - const struct glsl_type *type_b, - ast_operators op, - struct _mesa_glsl_parse_state *state, YYLTYPE *loc) -{ - if (state->language_version < 130) { - _mesa_glsl_error(loc, state, "bit operations require GLSL 1.30"); - return glsl_type::error_type; - } - - /* From page 50 (page 56 of PDF) of GLSL 1.30 spec: - * - * "The bitwise operators and (&), exclusive-or (^), and inclusive-or - * (|). The operands must be of type signed or unsigned integers or - * integer vectors." - */ - if (!type_a->is_integer()) { - _mesa_glsl_error(loc, state, "LHS of `%s' must be an integer", - ast_expression::operator_string(op)); - return glsl_type::error_type; - } - if (!type_b->is_integer()) { - _mesa_glsl_error(loc, state, "RHS of `%s' must be an integer", - ast_expression::operator_string(op)); - return glsl_type::error_type; - } - - /* "The fundamental types of the operands (signed or unsigned) must - * match," - */ - if (type_a->base_type != type_b->base_type) { - _mesa_glsl_error(loc, state, "operands of `%s' must have the same " - "base type", ast_expression::operator_string(op)); - return glsl_type::error_type; - } - - /* "The operands cannot be vectors of differing size." */ - if (type_a->is_vector() && - type_b->is_vector() && - type_a->vector_elements != type_b->vector_elements) { - _mesa_glsl_error(loc, state, "operands of `%s' cannot be vectors of " - "different sizes", ast_expression::operator_string(op)); - return glsl_type::error_type; - } - - /* "If one operand is a scalar and the other a vector, the scalar is - * applied component-wise to the vector, resulting in the same type as - * the vector. The fundamental types of the operands [...] will be the - * resulting fundamental type." - */ - if (type_a->is_scalar()) - return type_b; - else - return type_a; -} - -static const struct glsl_type * -modulus_result_type(const struct glsl_type *type_a, - const struct glsl_type *type_b, - struct _mesa_glsl_parse_state *state, YYLTYPE *loc) -{ - if (state->language_version < 130) { - _mesa_glsl_error(loc, state, - "operator '%%' is reserved in %s", - state->version_string); - return glsl_type::error_type; - } - - /* From GLSL 1.50 spec, page 56: - * "The operator modulus (%) operates on signed or unsigned integers or - * integer vectors. The operand types must both be signed or both be - * unsigned." - */ - if (!type_a->is_integer() || !type_b->is_integer() - || (type_a->base_type != type_b->base_type)) { - _mesa_glsl_error(loc, state, "type mismatch"); - return glsl_type::error_type; - } - - /* "The operands cannot be vectors of differing size. If one operand is - * a scalar and the other vector, then the scalar is applied component- - * wise to the vector, resulting in the same type as the vector. If both - * are vectors of the same size, the result is computed component-wise." - */ - if (type_a->is_vector()) { - if (!type_b->is_vector() - || (type_a->vector_elements == type_b->vector_elements)) - return type_a; - } else - return type_b; - - /* "The operator modulus (%) is not defined for any other data types - * (non-integer types)." - */ - _mesa_glsl_error(loc, state, "type mismatch"); - return glsl_type::error_type; -} - - -static const struct glsl_type * -relational_result_type(ir_rvalue * &value_a, ir_rvalue * &value_b, - struct _mesa_glsl_parse_state *state, YYLTYPE *loc) -{ - const glsl_type *type_a = value_a->type; - const glsl_type *type_b = value_b->type; - - /* From GLSL 1.50 spec, page 56: - * "The relational operators greater than (>), less than (<), greater - * than or equal (>=), and less than or equal (<=) operate only on - * scalar integer and scalar floating-point expressions." - */ - if (!type_a->is_numeric() - || !type_b->is_numeric() - || !type_a->is_scalar() - || !type_b->is_scalar()) { - _mesa_glsl_error(loc, state, - "Operands to relational operators must be scalar and " - "numeric"); - return glsl_type::error_type; - } - - /* "Either the operands' types must match, or the conversions from - * Section 4.1.10 "Implicit Conversions" will be applied to the integer - * operand, after which the types must match." - */ - if (!apply_implicit_conversion(type_a, value_b, state) - && !apply_implicit_conversion(type_b, value_a, state)) { - _mesa_glsl_error(loc, state, - "Could not implicitly convert operands to " - "relational operator"); - return glsl_type::error_type; - } - type_a = value_a->type; - type_b = value_b->type; - - if (type_a->base_type != type_b->base_type) { - _mesa_glsl_error(loc, state, "base type mismatch"); - return glsl_type::error_type; - } - - /* "The result is scalar Boolean." - */ - return glsl_type::bool_type; -} - -/** - * \brief Return the result type of a bit-shift operation. - * - * If the given types to the bit-shift operator are invalid, return - * glsl_type::error_type. - * - * \param type_a Type of LHS of bit-shift op - * \param type_b Type of RHS of bit-shift op - */ -static const struct glsl_type * -shift_result_type(const struct glsl_type *type_a, - const struct glsl_type *type_b, - ast_operators op, - struct _mesa_glsl_parse_state *state, YYLTYPE *loc) -{ - if (state->language_version < 130) { - _mesa_glsl_error(loc, state, "bit operations require GLSL 1.30"); - return glsl_type::error_type; - } - - /* From page 50 (page 56 of the PDF) of the GLSL 1.30 spec: - * - * "The shift operators (<<) and (>>). For both operators, the operands - * must be signed or unsigned integers or integer vectors. One operand - * can be signed while the other is unsigned." - */ - if (!type_a->is_integer()) { - _mesa_glsl_error(loc, state, "LHS of operator %s must be an integer or " - "integer vector", ast_expression::operator_string(op)); - return glsl_type::error_type; - - } - if (!type_b->is_integer()) { - _mesa_glsl_error(loc, state, "RHS of operator %s must be an integer or " - "integer vector", ast_expression::operator_string(op)); - return glsl_type::error_type; - } - - /* "If the first operand is a scalar, the second operand has to be - * a scalar as well." - */ - if (type_a->is_scalar() && !type_b->is_scalar()) { - _mesa_glsl_error(loc, state, "If the first operand of %s is scalar, the " - "second must be scalar as well", - ast_expression::operator_string(op)); - return glsl_type::error_type; - } - - /* If both operands are vectors, check that they have same number of - * elements. - */ - if (type_a->is_vector() && - type_b->is_vector() && - type_a->vector_elements != type_b->vector_elements) { - _mesa_glsl_error(loc, state, "Vector operands to operator %s must " - "have same number of elements", - ast_expression::operator_string(op)); - return glsl_type::error_type; - } - - /* "In all cases, the resulting type will be the same type as the left - * operand." - */ - return type_a; -} - -/** - * Validates that a value can be assigned to a location with a specified type - * - * Validates that \c rhs can be assigned to some location. If the types are - * not an exact match but an automatic conversion is possible, \c rhs will be - * converted. - * - * \return - * \c NULL if \c rhs cannot be assigned to a location with type \c lhs_type. - * Otherwise the actual RHS to be assigned will be returned. This may be - * \c rhs, or it may be \c rhs after some type conversion. - * - * \note - * In addition to being used for assignments, this function is used to - * type-check return values. - */ -ir_rvalue * -validate_assignment(struct _mesa_glsl_parse_state *state, - const glsl_type *lhs_type, ir_rvalue *rhs) -{ - /* If there is already some error in the RHS, just return it. Anything - * else will lead to an avalanche of error message back to the user. - */ - if (rhs->type->is_error()) - return rhs; - - /* If the types are identical, the assignment can trivially proceed. - */ - if (rhs->type == lhs_type) - return rhs; - - /* If the array element types are the same and the size of the LHS is zero, - * the assignment is okay. - * - * Note: Whole-array assignments are not permitted in GLSL 1.10, but this - * is handled by ir_dereference::is_lvalue. - */ - if (lhs_type->is_array() && rhs->type->is_array() - && (lhs_type->element_type() == rhs->type->element_type()) - && (lhs_type->array_size() == 0)) { - return rhs; - } - - /* Check for implicit conversion in GLSL 1.20 */ - if (apply_implicit_conversion(lhs_type, rhs, state)) { - if (rhs->type == lhs_type) - return rhs; - } - - return NULL; -} - -ir_rvalue * -do_assignment(exec_list *instructions, struct _mesa_glsl_parse_state *state, - ir_rvalue *lhs, ir_rvalue *rhs, - YYLTYPE lhs_loc) -{ - void *ctx = state; - bool error_emitted = (lhs->type->is_error() || rhs->type->is_error()); - - if (!error_emitted) { - if (lhs->variable_referenced() != NULL - && lhs->variable_referenced()->read_only) { - _mesa_glsl_error(&lhs_loc, state, - "assignment to read-only variable '%s'", - lhs->variable_referenced()->name); - error_emitted = true; - - } else if (!lhs->is_lvalue()) { - _mesa_glsl_error(& lhs_loc, state, "non-lvalue in assignment"); - error_emitted = true; - } - - if (state->es_shader && lhs->type->is_array()) { - _mesa_glsl_error(&lhs_loc, state, "whole array assignment is not " - "allowed in GLSL ES 1.00."); - error_emitted = true; - } - } - - ir_rvalue *new_rhs = validate_assignment(state, lhs->type, rhs); - if (new_rhs == NULL) { - _mesa_glsl_error(& lhs_loc, state, "type mismatch"); - } else { - rhs = new_rhs; - - /* If the LHS array was not declared with a size, it takes it size from - * the RHS. If the LHS is an l-value and a whole array, it must be a - * dereference of a variable. Any other case would require that the LHS - * is either not an l-value or not a whole array. - */ - if (lhs->type->array_size() == 0) { - ir_dereference *const d = lhs->as_dereference(); - - assert(d != NULL); - - ir_variable *const var = d->variable_referenced(); - - assert(var != NULL); - - if (var->max_array_access >= unsigned(rhs->type->array_size())) { - /* FINISHME: This should actually log the location of the RHS. */ - _mesa_glsl_error(& lhs_loc, state, "array size must be > %u due to " - "previous access", - var->max_array_access); - } - - var->type = glsl_type::get_array_instance(lhs->type->element_type(), - rhs->type->array_size()); - d->type = var->type; - } - } - - /* Most callers of do_assignment (assign, add_assign, pre_inc/dec, - * but not post_inc) need the converted assigned value as an rvalue - * to handle things like: - * - * i = j += 1; - * - * So we always just store the computed value being assigned to a - * temporary and return a deref of that temporary. If the rvalue - * ends up not being used, the temp will get copy-propagated out. - */ - ir_variable *var = new(ctx) ir_variable(rhs->type, "assignment_tmp", - ir_var_temporary); - ir_dereference_variable *deref_var = new(ctx) ir_dereference_variable(var); - instructions->push_tail(var); - instructions->push_tail(new(ctx) ir_assignment(deref_var, - rhs, - NULL)); - deref_var = new(ctx) ir_dereference_variable(var); - - if (!error_emitted) - instructions->push_tail(new(ctx) ir_assignment(lhs, deref_var, NULL)); - - return new(ctx) ir_dereference_variable(var); -} - -static ir_rvalue * -get_lvalue_copy(exec_list *instructions, ir_rvalue *lvalue) -{ - void *ctx = ralloc_parent(lvalue); - ir_variable *var; - - var = new(ctx) ir_variable(lvalue->type, "_post_incdec_tmp", - ir_var_temporary); - instructions->push_tail(var); - var->mode = ir_var_auto; - - instructions->push_tail(new(ctx) ir_assignment(new(ctx) ir_dereference_variable(var), - lvalue, NULL)); - - /* Once we've created this temporary, mark it read only so it's no - * longer considered an lvalue. - */ - var->read_only = true; - - return new(ctx) ir_dereference_variable(var); -} - - -ir_rvalue * -ast_node::hir(exec_list *instructions, - struct _mesa_glsl_parse_state *state) -{ - (void) instructions; - (void) state; - - return NULL; -} - -static void -mark_whole_array_access(ir_rvalue *access) -{ - ir_dereference_variable *deref = access->as_dereference_variable(); - - if (deref) { - deref->var->max_array_access = deref->type->length - 1; - } -} - -static ir_rvalue * -do_comparison(void *mem_ctx, int operation, ir_rvalue *op0, ir_rvalue *op1) -{ - int join_op; - ir_rvalue *cmp = NULL; - - if (operation == ir_binop_all_equal) - join_op = ir_binop_logic_and; - else - join_op = ir_binop_logic_or; - - switch (op0->type->base_type) { - case GLSL_TYPE_FLOAT: - case GLSL_TYPE_UINT: - case GLSL_TYPE_INT: - case GLSL_TYPE_BOOL: - return new(mem_ctx) ir_expression(operation, op0, op1); - - case GLSL_TYPE_ARRAY: { - for (unsigned int i = 0; i < op0->type->length; i++) { - ir_rvalue *e0, *e1, *result; - - e0 = new(mem_ctx) ir_dereference_array(op0->clone(mem_ctx, NULL), - new(mem_ctx) ir_constant(i)); - e1 = new(mem_ctx) ir_dereference_array(op1->clone(mem_ctx, NULL), - new(mem_ctx) ir_constant(i)); - result = do_comparison(mem_ctx, operation, e0, e1); - - if (cmp) { - cmp = new(mem_ctx) ir_expression(join_op, cmp, result); - } else { - cmp = result; - } - } - - mark_whole_array_access(op0); - mark_whole_array_access(op1); - break; - } - - case GLSL_TYPE_STRUCT: { - for (unsigned int i = 0; i < op0->type->length; i++) { - ir_rvalue *e0, *e1, *result; - const char *field_name = op0->type->fields.structure[i].name; - - e0 = new(mem_ctx) ir_dereference_record(op0->clone(mem_ctx, NULL), - field_name); - e1 = new(mem_ctx) ir_dereference_record(op1->clone(mem_ctx, NULL), - field_name); - result = do_comparison(mem_ctx, operation, e0, e1); - - if (cmp) { - cmp = new(mem_ctx) ir_expression(join_op, cmp, result); - } else { - cmp = result; - } - } - break; - } - - case GLSL_TYPE_ERROR: - case GLSL_TYPE_VOID: - case GLSL_TYPE_SAMPLER: - /* I assume a comparison of a struct containing a sampler just - * ignores the sampler present in the type. - */ - break; - - default: - assert(!"Should not get here."); - break; - } - - if (cmp == NULL) - cmp = new(mem_ctx) ir_constant(true); - - return cmp; -} - -ir_rvalue * -ast_expression::hir(exec_list *instructions, - struct _mesa_glsl_parse_state *state) -{ - void *ctx = state; - static const int operations[AST_NUM_OPERATORS] = { - -1, /* ast_assign doesn't convert to ir_expression. */ - -1, /* ast_plus doesn't convert to ir_expression. */ - ir_unop_neg, - ir_binop_add, - ir_binop_sub, - ir_binop_mul, - ir_binop_div, - ir_binop_mod, - ir_binop_lshift, - ir_binop_rshift, - ir_binop_less, - ir_binop_greater, - ir_binop_lequal, - ir_binop_gequal, - ir_binop_all_equal, - ir_binop_any_nequal, - ir_binop_bit_and, - ir_binop_bit_xor, - ir_binop_bit_or, - ir_unop_bit_not, - ir_binop_logic_and, - ir_binop_logic_xor, - ir_binop_logic_or, - ir_unop_logic_not, - - /* Note: The following block of expression types actually convert - * to multiple IR instructions. - */ - ir_binop_mul, /* ast_mul_assign */ - ir_binop_div, /* ast_div_assign */ - ir_binop_mod, /* ast_mod_assign */ - ir_binop_add, /* ast_add_assign */ - ir_binop_sub, /* ast_sub_assign */ - ir_binop_lshift, /* ast_ls_assign */ - ir_binop_rshift, /* ast_rs_assign */ - ir_binop_bit_and, /* ast_and_assign */ - ir_binop_bit_xor, /* ast_xor_assign */ - ir_binop_bit_or, /* ast_or_assign */ - - -1, /* ast_conditional doesn't convert to ir_expression. */ - ir_binop_add, /* ast_pre_inc. */ - ir_binop_sub, /* ast_pre_dec. */ - ir_binop_add, /* ast_post_inc. */ - ir_binop_sub, /* ast_post_dec. */ - -1, /* ast_field_selection doesn't conv to ir_expression. */ - -1, /* ast_array_index doesn't convert to ir_expression. */ - -1, /* ast_function_call doesn't conv to ir_expression. */ - -1, /* ast_identifier doesn't convert to ir_expression. */ - -1, /* ast_int_constant doesn't convert to ir_expression. */ - -1, /* ast_uint_constant doesn't conv to ir_expression. */ - -1, /* ast_float_constant doesn't conv to ir_expression. */ - -1, /* ast_bool_constant doesn't conv to ir_expression. */ - -1, /* ast_sequence doesn't convert to ir_expression. */ - }; - ir_rvalue *result = NULL; - ir_rvalue *op[3]; - const struct glsl_type *type = glsl_type::error_type; - bool error_emitted = false; - YYLTYPE loc; - - loc = this->get_location(); - - switch (this->oper) { - case ast_assign: { - op[0] = this->subexpressions[0]->hir(instructions, state); - op[1] = this->subexpressions[1]->hir(instructions, state); - - result = do_assignment(instructions, state, op[0], op[1], - this->subexpressions[0]->get_location()); - error_emitted = result->type->is_error(); - type = result->type; - break; - } - - case ast_plus: - op[0] = this->subexpressions[0]->hir(instructions, state); - - type = unary_arithmetic_result_type(op[0]->type, state, & loc); - - error_emitted = type->is_error(); - - result = op[0]; - break; - - case ast_neg: - op[0] = this->subexpressions[0]->hir(instructions, state); - - type = unary_arithmetic_result_type(op[0]->type, state, & loc); - - error_emitted = type->is_error(); - - result = new(ctx) ir_expression(operations[this->oper], type, - op[0], NULL); - break; - - case ast_add: - case ast_sub: - case ast_mul: - case ast_div: - op[0] = this->subexpressions[0]->hir(instructions, state); - op[1] = this->subexpressions[1]->hir(instructions, state); - - type = arithmetic_result_type(op[0], op[1], - (this->oper == ast_mul), - state, & loc); - error_emitted = type->is_error(); - - result = new(ctx) ir_expression(operations[this->oper], type, - op[0], op[1]); - break; - - case ast_mod: - op[0] = this->subexpressions[0]->hir(instructions, state); - op[1] = this->subexpressions[1]->hir(instructions, state); - - type = modulus_result_type(op[0]->type, op[1]->type, state, & loc); - - assert(operations[this->oper] == ir_binop_mod); - - result = new(ctx) ir_expression(operations[this->oper], type, - op[0], op[1]); - error_emitted = type->is_error(); - break; - - case ast_lshift: - case ast_rshift: - if (state->language_version < 130) { - _mesa_glsl_error(&loc, state, "operator %s requires GLSL 1.30", - operator_string(this->oper)); - error_emitted = true; - } - - op[0] = this->subexpressions[0]->hir(instructions, state); - op[1] = this->subexpressions[1]->hir(instructions, state); - type = shift_result_type(op[0]->type, op[1]->type, this->oper, state, - &loc); - result = new(ctx) ir_expression(operations[this->oper], type, - op[0], op[1]); - error_emitted = op[0]->type->is_error() || op[1]->type->is_error(); - break; - - case ast_less: - case ast_greater: - case ast_lequal: - case ast_gequal: - op[0] = this->subexpressions[0]->hir(instructions, state); - op[1] = this->subexpressions[1]->hir(instructions, state); - - type = relational_result_type(op[0], op[1], state, & loc); - - /* The relational operators must either generate an error or result - * in a scalar boolean. See page 57 of the GLSL 1.50 spec. - */ - assert(type->is_error() - || ((type->base_type == GLSL_TYPE_BOOL) - && type->is_scalar())); - - result = new(ctx) ir_expression(operations[this->oper], type, - op[0], op[1]); - error_emitted = type->is_error(); - break; - - case ast_nequal: - case ast_equal: - op[0] = this->subexpressions[0]->hir(instructions, state); - op[1] = this->subexpressions[1]->hir(instructions, state); - - /* From page 58 (page 64 of the PDF) of the GLSL 1.50 spec: - * - * "The equality operators equal (==), and not equal (!=) - * operate on all types. They result in a scalar Boolean. If - * the operand types do not match, then there must be a - * conversion from Section 4.1.10 "Implicit Conversions" - * applied to one operand that can make them match, in which - * case this conversion is done." - */ - if ((!apply_implicit_conversion(op[0]->type, op[1], state) - && !apply_implicit_conversion(op[1]->type, op[0], state)) - || (op[0]->type != op[1]->type)) { - _mesa_glsl_error(& loc, state, "operands of `%s' must have the same " - "type", (this->oper == ast_equal) ? "==" : "!="); - error_emitted = true; - } else if ((state->language_version <= 110) - && (op[0]->type->is_array() || op[1]->type->is_array())) { - _mesa_glsl_error(& loc, state, "array comparisons forbidden in " - "GLSL 1.10"); - error_emitted = true; - } - - result = do_comparison(ctx, operations[this->oper], op[0], op[1]); - type = glsl_type::bool_type; - - assert(error_emitted || (result->type == glsl_type::bool_type)); - break; - - case ast_bit_and: - case ast_bit_xor: - case ast_bit_or: - op[0] = this->subexpressions[0]->hir(instructions, state); - op[1] = this->subexpressions[1]->hir(instructions, state); - type = bit_logic_result_type(op[0]->type, op[1]->type, this->oper, - state, &loc); - result = new(ctx) ir_expression(operations[this->oper], type, - op[0], op[1]); - error_emitted = op[0]->type->is_error() || op[1]->type->is_error(); - break; - - case ast_bit_not: - op[0] = this->subexpressions[0]->hir(instructions, state); - - if (state->language_version < 130) { - _mesa_glsl_error(&loc, state, "bit-wise operations require GLSL 1.30"); - error_emitted = true; - } - - if (!op[0]->type->is_integer()) { - _mesa_glsl_error(&loc, state, "operand of `~' must be an integer"); - error_emitted = true; - } - - type = op[0]->type; - result = new(ctx) ir_expression(ir_unop_bit_not, type, op[0], NULL); - break; - - case ast_logic_and: { - op[0] = this->subexpressions[0]->hir(instructions, state); - - if (!op[0]->type->is_boolean() || !op[0]->type->is_scalar()) { - YYLTYPE loc = this->subexpressions[0]->get_location(); - - _mesa_glsl_error(& loc, state, "LHS of `%s' must be scalar boolean", - operator_string(this->oper)); - error_emitted = true; - } - - ir_constant *op0_const = op[0]->constant_expression_value(); - if (op0_const) { - if (op0_const->value.b[0]) { - op[1] = this->subexpressions[1]->hir(instructions, state); - - if (!op[1]->type->is_boolean() || !op[1]->type->is_scalar()) { - YYLTYPE loc = this->subexpressions[1]->get_location(); - - _mesa_glsl_error(& loc, state, - "RHS of `%s' must be scalar boolean", - operator_string(this->oper)); - error_emitted = true; - } - result = op[1]; - } else { - result = op0_const; - } - type = glsl_type::bool_type; - } else { - ir_variable *const tmp = new(ctx) ir_variable(glsl_type::bool_type, - "and_tmp", - ir_var_temporary); - instructions->push_tail(tmp); - - ir_if *const stmt = new(ctx) ir_if(op[0]); - instructions->push_tail(stmt); - - op[1] = this->subexpressions[1]->hir(&stmt->then_instructions, state); - - if (!op[1]->type->is_boolean() || !op[1]->type->is_scalar()) { - YYLTYPE loc = this->subexpressions[1]->get_location(); - - _mesa_glsl_error(& loc, state, - "RHS of `%s' must be scalar boolean", - operator_string(this->oper)); - error_emitted = true; - } - - ir_dereference *const then_deref = new(ctx) ir_dereference_variable(tmp); - ir_assignment *const then_assign = - new(ctx) ir_assignment(then_deref, op[1], NULL); - stmt->then_instructions.push_tail(then_assign); - - ir_dereference *const else_deref = new(ctx) ir_dereference_variable(tmp); - ir_assignment *const else_assign = - new(ctx) ir_assignment(else_deref, new(ctx) ir_constant(false), NULL); - stmt->else_instructions.push_tail(else_assign); - - result = new(ctx) ir_dereference_variable(tmp); - type = tmp->type; - } - break; - } - - case ast_logic_or: { - op[0] = this->subexpressions[0]->hir(instructions, state); - - if (!op[0]->type->is_boolean() || !op[0]->type->is_scalar()) { - YYLTYPE loc = this->subexpressions[0]->get_location(); - - _mesa_glsl_error(& loc, state, "LHS of `%s' must be scalar boolean", - operator_string(this->oper)); - error_emitted = true; - } - - ir_constant *op0_const = op[0]->constant_expression_value(); - if (op0_const) { - if (op0_const->value.b[0]) { - result = op0_const; - } else { - op[1] = this->subexpressions[1]->hir(instructions, state); - - if (!op[1]->type->is_boolean() || !op[1]->type->is_scalar()) { - YYLTYPE loc = this->subexpressions[1]->get_location(); - - _mesa_glsl_error(& loc, state, - "RHS of `%s' must be scalar boolean", - operator_string(this->oper)); - error_emitted = true; - } - result = op[1]; - } - type = glsl_type::bool_type; - } else { - ir_variable *const tmp = new(ctx) ir_variable(glsl_type::bool_type, - "or_tmp", - ir_var_temporary); - instructions->push_tail(tmp); - - ir_if *const stmt = new(ctx) ir_if(op[0]); - instructions->push_tail(stmt); - - op[1] = this->subexpressions[1]->hir(&stmt->else_instructions, state); - - if (!op[1]->type->is_boolean() || !op[1]->type->is_scalar()) { - YYLTYPE loc = this->subexpressions[1]->get_location(); - - _mesa_glsl_error(& loc, state, "RHS of `%s' must be scalar boolean", - operator_string(this->oper)); - error_emitted = true; - } - - ir_dereference *const then_deref = new(ctx) ir_dereference_variable(tmp); - ir_assignment *const then_assign = - new(ctx) ir_assignment(then_deref, new(ctx) ir_constant(true), NULL); - stmt->then_instructions.push_tail(then_assign); - - ir_dereference *const else_deref = new(ctx) ir_dereference_variable(tmp); - ir_assignment *const else_assign = - new(ctx) ir_assignment(else_deref, op[1], NULL); - stmt->else_instructions.push_tail(else_assign); - - result = new(ctx) ir_dereference_variable(tmp); - type = tmp->type; - } - break; - } - - case ast_logic_xor: - op[0] = this->subexpressions[0]->hir(instructions, state); - op[1] = this->subexpressions[1]->hir(instructions, state); - - - result = new(ctx) ir_expression(operations[this->oper], glsl_type::bool_type, - op[0], op[1]); - type = glsl_type::bool_type; - break; - - case ast_logic_not: - op[0] = this->subexpressions[0]->hir(instructions, state); - - if (!op[0]->type->is_boolean() || !op[0]->type->is_scalar()) { - YYLTYPE loc = this->subexpressions[0]->get_location(); - - _mesa_glsl_error(& loc, state, - "operand of `!' must be scalar boolean"); - error_emitted = true; - } - - result = new(ctx) ir_expression(operations[this->oper], glsl_type::bool_type, - op[0], NULL); - type = glsl_type::bool_type; - break; - - case ast_mul_assign: - case ast_div_assign: - case ast_add_assign: - case ast_sub_assign: { - op[0] = this->subexpressions[0]->hir(instructions, state); - op[1] = this->subexpressions[1]->hir(instructions, state); - - type = arithmetic_result_type(op[0], op[1], - (this->oper == ast_mul_assign), - state, & loc); - - ir_rvalue *temp_rhs = new(ctx) ir_expression(operations[this->oper], type, - op[0], op[1]); - - result = do_assignment(instructions, state, - op[0]->clone(ctx, NULL), temp_rhs, - this->subexpressions[0]->get_location()); - type = result->type; - error_emitted = (op[0]->type->is_error()); - - /* GLSL 1.10 does not allow array assignment. However, we don't have to - * explicitly test for this because none of the binary expression - * operators allow array operands either. - */ - - break; - } - - case ast_mod_assign: { - op[0] = this->subexpressions[0]->hir(instructions, state); - op[1] = this->subexpressions[1]->hir(instructions, state); - - type = modulus_result_type(op[0]->type, op[1]->type, state, & loc); - - assert(operations[this->oper] == ir_binop_mod); - - ir_rvalue *temp_rhs; - temp_rhs = new(ctx) ir_expression(operations[this->oper], type, - op[0], op[1]); - - result = do_assignment(instructions, state, - op[0]->clone(ctx, NULL), temp_rhs, - this->subexpressions[0]->get_location()); - type = result->type; - error_emitted = type->is_error(); - break; - } - - case ast_ls_assign: - case ast_rs_assign: { - op[0] = this->subexpressions[0]->hir(instructions, state); - op[1] = this->subexpressions[1]->hir(instructions, state); - type = shift_result_type(op[0]->type, op[1]->type, this->oper, state, - &loc); - ir_rvalue *temp_rhs = new(ctx) ir_expression(operations[this->oper], - type, op[0], op[1]); - result = do_assignment(instructions, state, op[0]->clone(ctx, NULL), - temp_rhs, - this->subexpressions[0]->get_location()); - error_emitted = op[0]->type->is_error() || op[1]->type->is_error(); - break; - } - - case ast_and_assign: - case ast_xor_assign: - case ast_or_assign: { - op[0] = this->subexpressions[0]->hir(instructions, state); - op[1] = this->subexpressions[1]->hir(instructions, state); - type = bit_logic_result_type(op[0]->type, op[1]->type, this->oper, - state, &loc); - ir_rvalue *temp_rhs = new(ctx) ir_expression(operations[this->oper], - type, op[0], op[1]); - result = do_assignment(instructions, state, op[0]->clone(ctx, NULL), - temp_rhs, - this->subexpressions[0]->get_location()); - error_emitted = op[0]->type->is_error() || op[1]->type->is_error(); - break; - } - - case ast_conditional: { - op[0] = this->subexpressions[0]->hir(instructions, state); - - /* From page 59 (page 65 of the PDF) of the GLSL 1.50 spec: - * - * "The ternary selection operator (?:). It operates on three - * expressions (exp1 ? exp2 : exp3). This operator evaluates the - * first expression, which must result in a scalar Boolean." - */ - if (!op[0]->type->is_boolean() || !op[0]->type->is_scalar()) { - YYLTYPE loc = this->subexpressions[0]->get_location(); - - _mesa_glsl_error(& loc, state, "?: condition must be scalar boolean"); - error_emitted = true; - } - - /* The :? operator is implemented by generating an anonymous temporary - * followed by an if-statement. The last instruction in each branch of - * the if-statement assigns a value to the anonymous temporary. This - * temporary is the r-value of the expression. - */ - exec_list then_instructions; - exec_list else_instructions; - - op[1] = this->subexpressions[1]->hir(&then_instructions, state); - op[2] = this->subexpressions[2]->hir(&else_instructions, state); - - /* From page 59 (page 65 of the PDF) of the GLSL 1.50 spec: - * - * "The second and third expressions can be any type, as - * long their types match, or there is a conversion in - * Section 4.1.10 "Implicit Conversions" that can be applied - * to one of the expressions to make their types match. This - * resulting matching type is the type of the entire - * expression." - */ - if ((!apply_implicit_conversion(op[1]->type, op[2], state) - && !apply_implicit_conversion(op[2]->type, op[1], state)) - || (op[1]->type != op[2]->type)) { - YYLTYPE loc = this->subexpressions[1]->get_location(); - - _mesa_glsl_error(& loc, state, "Second and third operands of ?: " - "operator must have matching types."); - error_emitted = true; - type = glsl_type::error_type; - } else { - type = op[1]->type; - } - - /* From page 33 (page 39 of the PDF) of the GLSL 1.10 spec: - * - * "The second and third expressions must be the same type, but can - * be of any type other than an array." - */ - if ((state->language_version <= 110) && type->is_array()) { - _mesa_glsl_error(& loc, state, "Second and third operands of ?: " - "operator must not be arrays."); - error_emitted = true; - } - - ir_constant *cond_val = op[0]->constant_expression_value(); - ir_constant *then_val = op[1]->constant_expression_value(); - ir_constant *else_val = op[2]->constant_expression_value(); - - if (then_instructions.is_empty() - && else_instructions.is_empty() - && (cond_val != NULL) && (then_val != NULL) && (else_val != NULL)) { - result = (cond_val->value.b[0]) ? then_val : else_val; - } else { - ir_variable *const tmp = - new(ctx) ir_variable(type, "conditional_tmp", ir_var_temporary); - instructions->push_tail(tmp); - - ir_if *const stmt = new(ctx) ir_if(op[0]); - instructions->push_tail(stmt); - - then_instructions.move_nodes_to(& stmt->then_instructions); - ir_dereference *const then_deref = - new(ctx) ir_dereference_variable(tmp); - ir_assignment *const then_assign = - new(ctx) ir_assignment(then_deref, op[1], NULL); - stmt->then_instructions.push_tail(then_assign); - - else_instructions.move_nodes_to(& stmt->else_instructions); - ir_dereference *const else_deref = - new(ctx) ir_dereference_variable(tmp); - ir_assignment *const else_assign = - new(ctx) ir_assignment(else_deref, op[2], NULL); - stmt->else_instructions.push_tail(else_assign); - - result = new(ctx) ir_dereference_variable(tmp); - } - break; - } - - case ast_pre_inc: - case ast_pre_dec: { - op[0] = this->subexpressions[0]->hir(instructions, state); - if (op[0]->type->base_type == GLSL_TYPE_FLOAT) - op[1] = new(ctx) ir_constant(1.0f); - else - op[1] = new(ctx) ir_constant(1); - - type = arithmetic_result_type(op[0], op[1], false, state, & loc); - - ir_rvalue *temp_rhs; - temp_rhs = new(ctx) ir_expression(operations[this->oper], type, - op[0], op[1]); - - result = do_assignment(instructions, state, - op[0]->clone(ctx, NULL), temp_rhs, - this->subexpressions[0]->get_location()); - type = result->type; - error_emitted = op[0]->type->is_error(); - break; - } - - case ast_post_inc: - case ast_post_dec: { - op[0] = this->subexpressions[0]->hir(instructions, state); - if (op[0]->type->base_type == GLSL_TYPE_FLOAT) - op[1] = new(ctx) ir_constant(1.0f); - else - op[1] = new(ctx) ir_constant(1); - - error_emitted = op[0]->type->is_error() || op[1]->type->is_error(); - - type = arithmetic_result_type(op[0], op[1], false, state, & loc); - - ir_rvalue *temp_rhs; - temp_rhs = new(ctx) ir_expression(operations[this->oper], type, - op[0], op[1]); - - /* Get a temporary of a copy of the lvalue before it's modified. - * This may get thrown away later. - */ - result = get_lvalue_copy(instructions, op[0]->clone(ctx, NULL)); - - (void)do_assignment(instructions, state, - op[0]->clone(ctx, NULL), temp_rhs, - this->subexpressions[0]->get_location()); - - type = result->type; - error_emitted = op[0]->type->is_error(); - break; - } - - case ast_field_selection: - result = _mesa_ast_field_selection_to_hir(this, instructions, state); - type = result->type; - break; - - case ast_array_index: { - YYLTYPE index_loc = subexpressions[1]->get_location(); - - op[0] = subexpressions[0]->hir(instructions, state); - op[1] = subexpressions[1]->hir(instructions, state); - - error_emitted = op[0]->type->is_error() || op[1]->type->is_error(); - - ir_rvalue *const array = op[0]; - - result = new(ctx) ir_dereference_array(op[0], op[1]); - - /* Do not use op[0] after this point. Use array. - */ - op[0] = NULL; - - - if (error_emitted) - break; - - if (!array->type->is_array() - && !array->type->is_matrix() - && !array->type->is_vector()) { - _mesa_glsl_error(& index_loc, state, - "cannot dereference non-array / non-matrix / " - "non-vector"); - error_emitted = true; - } - - if (!op[1]->type->is_integer()) { - _mesa_glsl_error(& index_loc, state, - "array index must be integer type"); - error_emitted = true; - } else if (!op[1]->type->is_scalar()) { - _mesa_glsl_error(& index_loc, state, - "array index must be scalar"); - error_emitted = true; - } - - /* If the array index is a constant expression and the array has a - * declared size, ensure that the access is in-bounds. If the array - * index is not a constant expression, ensure that the array has a - * declared size. - */ - ir_constant *const const_index = op[1]->constant_expression_value(); - if (const_index != NULL) { - const int idx = const_index->value.i[0]; - const char *type_name; - unsigned bound = 0; - - if (array->type->is_matrix()) { - type_name = "matrix"; - } else if (array->type->is_vector()) { - type_name = "vector"; - } else { - type_name = "array"; - } - - /* From page 24 (page 30 of the PDF) of the GLSL 1.50 spec: - * - * "It is illegal to declare an array with a size, and then - * later (in the same shader) index the same array with an - * integral constant expression greater than or equal to the - * declared size. It is also illegal to index an array with a - * negative constant expression." - */ - if (array->type->is_matrix()) { - if (array->type->row_type()->vector_elements <= idx) { - bound = array->type->row_type()->vector_elements; - } - } else if (array->type->is_vector()) { - if (array->type->vector_elements <= idx) { - bound = array->type->vector_elements; - } - } else { - if ((array->type->array_size() > 0) - && (array->type->array_size() <= idx)) { - bound = array->type->array_size(); - } - } - - if (bound > 0) { - _mesa_glsl_error(& loc, state, "%s index must be < %u", - type_name, bound); - error_emitted = true; - } else if (idx < 0) { - _mesa_glsl_error(& loc, state, "%s index must be >= 0", - type_name); - error_emitted = true; - } - - if (array->type->is_array()) { - /* If the array is a variable dereference, it dereferences the - * whole array, by definition. Use this to get the variable. - * - * FINISHME: Should some methods for getting / setting / testing - * FINISHME: array access limits be added to ir_dereference? - */ - ir_variable *const v = array->whole_variable_referenced(); - if ((v != NULL) && (unsigned(idx) > v->max_array_access)) - v->max_array_access = idx; - } - } else if (array->type->array_size() == 0) { - _mesa_glsl_error(&loc, state, "unsized array index must be constant"); - } else { - if (array->type->is_array()) { - /* whole_variable_referenced can return NULL if the array is a - * member of a structure. In this case it is safe to not update - * the max_array_access field because it is never used for fields - * of structures. - */ - ir_variable *v = array->whole_variable_referenced(); - if (v != NULL) - v->max_array_access = array->type->array_size(); - } - } - - /* From page 23 (29 of the PDF) of the GLSL 1.30 spec: - * - * "Samplers aggregated into arrays within a shader (using square - * brackets [ ]) can only be indexed with integral constant - * expressions [...]." - * - * This restriction was added in GLSL 1.30. Shaders using earlier version - * of the language should not be rejected by the compiler front-end for - * using this construct. This allows useful things such as using a loop - * counter as the index to an array of samplers. If the loop in unrolled, - * the code should compile correctly. Instead, emit a warning. - */ - if (array->type->is_array() && - array->type->element_type()->is_sampler() && - const_index == NULL) { - - if (state->language_version == 100) { - _mesa_glsl_warning(&loc, state, - "sampler arrays indexed with non-constant " - "expressions is optional in GLSL ES 1.00"); - } else if (state->language_version < 130) { - _mesa_glsl_warning(&loc, state, - "sampler arrays indexed with non-constant " - "expressions is forbidden in GLSL 1.30 and " - "later"); - } else { - _mesa_glsl_error(&loc, state, - "sampler arrays indexed with non-constant " - "expressions is forbidden in GLSL 1.30 and " - "later"); - error_emitted = true; - } - } - - if (error_emitted) - result->type = glsl_type::error_type; - - type = result->type; - break; - } - - case ast_function_call: - /* Should *NEVER* get here. ast_function_call should always be handled - * by ast_function_expression::hir. - */ - assert(0); - break; - - case ast_identifier: { - /* ast_identifier can appear several places in a full abstract syntax - * tree. This particular use must be at location specified in the grammar - * as 'variable_identifier'. - */ - ir_variable *var = - state->symbols->get_variable(this->primary_expression.identifier); - - result = new(ctx) ir_dereference_variable(var); - - if (var != NULL) { - var->used = true; - type = result->type; - } else { - _mesa_glsl_error(& loc, state, "`%s' undeclared", - this->primary_expression.identifier); - - error_emitted = true; - } - break; - } - - case ast_int_constant: - type = glsl_type::int_type; - result = new(ctx) ir_constant(this->primary_expression.int_constant); - break; - - case ast_uint_constant: - type = glsl_type::uint_type; - result = new(ctx) ir_constant(this->primary_expression.uint_constant); - break; - - case ast_float_constant: - type = glsl_type::float_type; - result = new(ctx) ir_constant(this->primary_expression.float_constant); - break; - - case ast_bool_constant: - type = glsl_type::bool_type; - result = new(ctx) ir_constant(bool(this->primary_expression.bool_constant)); - break; - - case ast_sequence: { - /* It should not be possible to generate a sequence in the AST without - * any expressions in it. - */ - assert(!this->expressions.is_empty()); - - /* The r-value of a sequence is the last expression in the sequence. If - * the other expressions in the sequence do not have side-effects (and - * therefore add instructions to the instruction list), they get dropped - * on the floor. - */ - foreach_list_typed (ast_node, ast, link, &this->expressions) - result = ast->hir(instructions, state); - - type = result->type; - - /* Any errors should have already been emitted in the loop above. - */ - error_emitted = true; - break; - } - } - - if (type->is_error() && !error_emitted) - _mesa_glsl_error(& loc, state, "type mismatch"); - - return result; -} - - -ir_rvalue * -ast_expression_statement::hir(exec_list *instructions, - struct _mesa_glsl_parse_state *state) -{ - /* It is possible to have expression statements that don't have an - * expression. This is the solitary semicolon: - * - * for (i = 0; i < 5; i++) - * ; - * - * In this case the expression will be NULL. Test for NULL and don't do - * anything in that case. - */ - if (expression != NULL) - expression->hir(instructions, state); - - /* Statements do not have r-values. - */ - return NULL; -} - - -ir_rvalue * -ast_compound_statement::hir(exec_list *instructions, - struct _mesa_glsl_parse_state *state) -{ - if (new_scope) - state->symbols->push_scope(); - - foreach_list_typed (ast_node, ast, link, &this->statements) - ast->hir(instructions, state); - - if (new_scope) - state->symbols->pop_scope(); - - /* Compound statements do not have r-values. - */ - return NULL; -} - - -static const glsl_type * -process_array_type(YYLTYPE *loc, const glsl_type *base, ast_node *array_size, - struct _mesa_glsl_parse_state *state) -{ - unsigned length = 0; - - /* FINISHME: Reject delcarations of multidimensional arrays. */ - - if (array_size != NULL) { - exec_list dummy_instructions; - ir_rvalue *const ir = array_size->hir(& dummy_instructions, state); - YYLTYPE loc = array_size->get_location(); - - /* FINISHME: Verify that the grammar forbids side-effects in array - * FINISHME: sizes. i.e., 'vec4 [x = 12] data' - */ - assert(dummy_instructions.is_empty()); - - if (ir != NULL) { - if (!ir->type->is_integer()) { - _mesa_glsl_error(& loc, state, "array size must be integer type"); - } else if (!ir->type->is_scalar()) { - _mesa_glsl_error(& loc, state, "array size must be scalar type"); - } else { - ir_constant *const size = ir->constant_expression_value(); - - if (size == NULL) { - _mesa_glsl_error(& loc, state, "array size must be a " - "constant valued expression"); - } else if (size->value.i[0] <= 0) { - _mesa_glsl_error(& loc, state, "array size must be > 0"); - } else { - assert(size->type == ir->type); - length = size->value.u[0]; - } - } - } - } else if (state->es_shader) { - /* Section 10.17 of the GLSL ES 1.00 specification states that unsized - * array declarations have been removed from the language. - */ - _mesa_glsl_error(loc, state, "unsized array declarations are not " - "allowed in GLSL ES 1.00."); - } - - return glsl_type::get_array_instance(base, length); -} - - -const glsl_type * -ast_type_specifier::glsl_type(const char **name, - struct _mesa_glsl_parse_state *state) const -{ - const struct glsl_type *type; - - type = state->symbols->get_type(this->type_name); - *name = this->type_name; - - if (this->is_array) { - YYLTYPE loc = this->get_location(); - type = process_array_type(&loc, type, this->array_size, state); - } - - return type; -} - - -static void -apply_type_qualifier_to_variable(const struct ast_type_qualifier *qual, - ir_variable *var, - struct _mesa_glsl_parse_state *state, - YYLTYPE *loc) -{ - if (qual->flags.q.invariant) { - if (var->used) { - _mesa_glsl_error(loc, state, - "variable `%s' may not be redeclared " - "`invariant' after being used", - var->name); - } else { - var->invariant = 1; - } - } - - if (qual->flags.q.constant || qual->flags.q.attribute - || qual->flags.q.uniform - || (qual->flags.q.varying && (state->target == fragment_shader))) - var->read_only = 1; - - if (qual->flags.q.centroid) - var->centroid = 1; - - if (qual->flags.q.attribute && state->target != vertex_shader) { - var->type = glsl_type::error_type; - _mesa_glsl_error(loc, state, - "`attribute' variables may not be declared in the " - "%s shader", - _mesa_glsl_shader_target_name(state->target)); - } - - /* From page 25 (page 31 of the PDF) of the GLSL 1.10 spec: - * - * "The varying qualifier can be used only with the data types - * float, vec2, vec3, vec4, mat2, mat3, and mat4, or arrays of - * these." - */ - if (qual->flags.q.varying) { - const glsl_type *non_array_type; - - if (var->type && var->type->is_array()) - non_array_type = var->type->fields.array; - else - non_array_type = var->type; - - if (non_array_type && non_array_type->base_type != GLSL_TYPE_FLOAT) { - var->type = glsl_type::error_type; - _mesa_glsl_error(loc, state, - "varying variables must be of base type float"); - } - } - - /* If there is no qualifier that changes the mode of the variable, leave - * the setting alone. - */ - if (qual->flags.q.in && qual->flags.q.out) - var->mode = ir_var_inout; - else if (qual->flags.q.attribute || qual->flags.q.in - || (qual->flags.q.varying && (state->target == fragment_shader))) - var->mode = ir_var_in; - else if (qual->flags.q.out - || (qual->flags.q.varying && (state->target == vertex_shader))) - var->mode = ir_var_out; - else if (qual->flags.q.uniform) - var->mode = ir_var_uniform; - - if (state->all_invariant && (state->current_function == NULL)) { - switch (state->target) { - case vertex_shader: - if (var->mode == ir_var_out) - var->invariant = true; - break; - case geometry_shader: - if ((var->mode == ir_var_in) || (var->mode == ir_var_out)) - var->invariant = true; - break; - case fragment_shader: - if (var->mode == ir_var_in) - var->invariant = true; - break; - } - } - - if (qual->flags.q.flat) - var->interpolation = ir_var_flat; - else if (qual->flags.q.noperspective) - var->interpolation = ir_var_noperspective; - else - var->interpolation = ir_var_smooth; - - var->pixel_center_integer = qual->flags.q.pixel_center_integer; - var->origin_upper_left = qual->flags.q.origin_upper_left; - if ((qual->flags.q.origin_upper_left || qual->flags.q.pixel_center_integer) - && (strcmp(var->name, "gl_FragCoord") != 0)) { - const char *const qual_string = (qual->flags.q.origin_upper_left) - ? "origin_upper_left" : "pixel_center_integer"; - - _mesa_glsl_error(loc, state, - "layout qualifier `%s' can only be applied to " - "fragment shader input `gl_FragCoord'", - qual_string); - } - - if (qual->flags.q.explicit_location) { - const bool global_scope = (state->current_function == NULL); - bool fail = false; - const char *string = ""; - - /* In the vertex shader only shader inputs can be given explicit - * locations. - * - * In the fragment shader only shader outputs can be given explicit - * locations. - */ - switch (state->target) { - case vertex_shader: - if (!global_scope || (var->mode != ir_var_in)) { - fail = true; - string = "input"; - } - break; - - case geometry_shader: - _mesa_glsl_error(loc, state, - "geometry shader variables cannot be given " - "explicit locations\n"); - break; - - case fragment_shader: - if (!global_scope || (var->mode != ir_var_in)) { - fail = true; - string = "output"; - } - break; - }; - - if (fail) { - _mesa_glsl_error(loc, state, - "only %s shader %s variables can be given an " - "explicit location\n", - _mesa_glsl_shader_target_name(state->target), - string); - } else { - var->explicit_location = true; - - /* This bit of silliness is needed because invalid explicit locations - * are supposed to be flagged during linking. Small negative values - * biased by VERT_ATTRIB_GENERIC0 or FRAG_RESULT_DATA0 could alias - * built-in values (e.g., -16+VERT_ATTRIB_GENERIC0 = VERT_ATTRIB_POS). - * The linker needs to be able to differentiate these cases. This - * ensures that negative values stay negative. - */ - if (qual->location >= 0) { - var->location = (state->target == vertex_shader) - ? (qual->location + VERT_ATTRIB_GENERIC0) - : (qual->location + FRAG_RESULT_DATA0); - } else { - var->location = qual->location; - } - } - } - - /* Does the declaration use the 'layout' keyword? - */ - const bool uses_layout = qual->flags.q.pixel_center_integer - || qual->flags.q.origin_upper_left - || qual->flags.q.explicit_location; - - /* Does the declaration use the deprecated 'attribute' or 'varying' - * keywords? - */ - const bool uses_deprecated_qualifier = qual->flags.q.attribute - || qual->flags.q.varying; - - /* Is the 'layout' keyword used with parameters that allow relaxed checking. - * Many implementations of GL_ARB_fragment_coord_conventions_enable and some - * implementations (only Mesa?) GL_ARB_explicit_attrib_location_enable - * allowed the layout qualifier to be used with 'varying' and 'attribute'. - * These extensions and all following extensions that add the 'layout' - * keyword have been modified to require the use of 'in' or 'out'. - * - * The following extension do not allow the deprecated keywords: - * - * GL_AMD_conservative_depth - * GL_ARB_gpu_shader5 - * GL_ARB_separate_shader_objects - * GL_ARB_tesselation_shader - * GL_ARB_transform_feedback3 - * GL_ARB_uniform_buffer_object - * - * It is unknown whether GL_EXT_shader_image_load_store or GL_NV_gpu_shader5 - * allow layout with the deprecated keywords. - */ - const bool relaxed_layout_qualifier_checking = - state->ARB_fragment_coord_conventions_enable; - - if (uses_layout && uses_deprecated_qualifier) { - if (relaxed_layout_qualifier_checking) { - _mesa_glsl_warning(loc, state, - "`layout' qualifier may not be used with " - "`attribute' or `varying'"); - } else { - _mesa_glsl_error(loc, state, - "`layout' qualifier may not be used with " - "`attribute' or `varying'"); - } - } - - /* Layout qualifiers for gl_FragDepth, which are enabled by extension - * AMD_conservative_depth. - */ - int depth_layout_count = qual->flags.q.depth_any - + qual->flags.q.depth_greater - + qual->flags.q.depth_less - + qual->flags.q.depth_unchanged; - if (depth_layout_count > 0 - && !state->AMD_conservative_depth_enable) { - _mesa_glsl_error(loc, state, - "extension GL_AMD_conservative_depth must be enabled " - "to use depth layout qualifiers"); - } else if (depth_layout_count > 0 - && strcmp(var->name, "gl_FragDepth") != 0) { - _mesa_glsl_error(loc, state, - "depth layout qualifiers can be applied only to " - "gl_FragDepth"); - } else if (depth_layout_count > 1 - && strcmp(var->name, "gl_FragDepth") == 0) { - _mesa_glsl_error(loc, state, - "at most one depth layout qualifier can be applied to " - "gl_FragDepth"); - } - if (qual->flags.q.depth_any) - var->depth_layout = ir_depth_layout_any; - else if (qual->flags.q.depth_greater) - var->depth_layout = ir_depth_layout_greater; - else if (qual->flags.q.depth_less) - var->depth_layout = ir_depth_layout_less; - else if (qual->flags.q.depth_unchanged) - var->depth_layout = ir_depth_layout_unchanged; - else - var->depth_layout = ir_depth_layout_none; - - if (var->type->is_array() && state->language_version != 110) { - var->array_lvalue = true; - } -} - - -ir_rvalue * -ast_declarator_list::hir(exec_list *instructions, - struct _mesa_glsl_parse_state *state) -{ - void *ctx = state; - const struct glsl_type *decl_type; - const char *type_name = NULL; - ir_rvalue *result = NULL; - YYLTYPE loc = this->get_location(); - - /* From page 46 (page 52 of the PDF) of the GLSL 1.50 spec: - * - * "To ensure that a particular output variable is invariant, it is - * necessary to use the invariant qualifier. It can either be used to - * qualify a previously declared variable as being invariant - * - * invariant gl_Position; // make existing gl_Position be invariant" - * - * In these cases the parser will set the 'invariant' flag in the declarator - * list, and the type will be NULL. - */ - if (this->invariant) { - assert(this->type == NULL); - - if (state->current_function != NULL) { - _mesa_glsl_error(& loc, state, - "All uses of `invariant' keyword must be at global " - "scope\n"); - } - - foreach_list_typed (ast_declaration, decl, link, &this->declarations) { - assert(!decl->is_array); - assert(decl->array_size == NULL); - assert(decl->initializer == NULL); - - ir_variable *const earlier = - state->symbols->get_variable(decl->identifier); - if (earlier == NULL) { - _mesa_glsl_error(& loc, state, - "Undeclared variable `%s' cannot be marked " - "invariant\n", decl->identifier); - } else if ((state->target == vertex_shader) - && (earlier->mode != ir_var_out)) { - _mesa_glsl_error(& loc, state, - "`%s' cannot be marked invariant, vertex shader " - "outputs only\n", decl->identifier); - } else if ((state->target == fragment_shader) - && (earlier->mode != ir_var_in)) { - _mesa_glsl_error(& loc, state, - "`%s' cannot be marked invariant, fragment shader " - "inputs only\n", decl->identifier); - } else if (earlier->used) { - _mesa_glsl_error(& loc, state, - "variable `%s' may not be redeclared " - "`invariant' after being used", - earlier->name); - } else { - earlier->invariant = true; - } - } - - /* Invariant redeclarations do not have r-values. - */ - return NULL; - } - - assert(this->type != NULL); - assert(!this->invariant); - - /* The type specifier may contain a structure definition. Process that - * before any of the variable declarations. - */ - (void) this->type->specifier->hir(instructions, state); - - decl_type = this->type->specifier->glsl_type(& type_name, state); - if (this->declarations.is_empty()) { - /* The only valid case where the declaration list can be empty is when - * the declaration is setting the default precision of a built-in type - * (e.g., 'precision highp vec4;'). - */ - - if (decl_type != NULL) { - } else { - _mesa_glsl_error(& loc, state, "incomplete declaration"); - } - } - - foreach_list_typed (ast_declaration, decl, link, &this->declarations) { - const struct glsl_type *var_type; - ir_variable *var; - - /* FINISHME: Emit a warning if a variable declaration shadows a - * FINISHME: declaration at a higher scope. - */ - - if ((decl_type == NULL) || decl_type->is_void()) { - if (type_name != NULL) { - _mesa_glsl_error(& loc, state, - "invalid type `%s' in declaration of `%s'", - type_name, decl->identifier); - } else { - _mesa_glsl_error(& loc, state, - "invalid type in declaration of `%s'", - decl->identifier); - } - continue; - } - - if (decl->is_array) { - var_type = process_array_type(&loc, decl_type, decl->array_size, - state); - } else { - var_type = decl_type; - } - - var = new(ctx) ir_variable(var_type, decl->identifier, ir_var_auto); - - /* From page 22 (page 28 of the PDF) of the GLSL 1.10 specification; - * - * "Global variables can only use the qualifiers const, - * attribute, uni form, or varying. Only one may be - * specified. - * - * Local variables can only use the qualifier const." - * - * This is relaxed in GLSL 1.30. It is also relaxed by any extension - * that adds the 'layout' keyword. - */ - if ((state->language_version < 130) - && !state->ARB_explicit_attrib_location_enable - && !state->ARB_fragment_coord_conventions_enable) { - if (this->type->qualifier.flags.q.out) { - _mesa_glsl_error(& loc, state, - "`out' qualifier in declaration of `%s' " - "only valid for function parameters in %s.", - decl->identifier, state->version_string); - } - if (this->type->qualifier.flags.q.in) { - _mesa_glsl_error(& loc, state, - "`in' qualifier in declaration of `%s' " - "only valid for function parameters in %s.", - decl->identifier, state->version_string); - } - /* FINISHME: Test for other invalid qualifiers. */ - } - - apply_type_qualifier_to_variable(& this->type->qualifier, var, state, - & loc); - - if (this->type->qualifier.flags.q.invariant) { - if ((state->target == vertex_shader) && !(var->mode == ir_var_out || - var->mode == ir_var_inout)) { - /* FINISHME: Note that this doesn't work for invariant on - * a function signature outval - */ - _mesa_glsl_error(& loc, state, - "`%s' cannot be marked invariant, vertex shader " - "outputs only\n", var->name); - } else if ((state->target == fragment_shader) && - !(var->mode == ir_var_in || var->mode == ir_var_inout)) { - /* FINISHME: Note that this doesn't work for invariant on - * a function signature inval - */ - _mesa_glsl_error(& loc, state, - "`%s' cannot be marked invariant, fragment shader " - "inputs only\n", var->name); - } - } - - if (state->current_function != NULL) { - const char *mode = NULL; - const char *extra = ""; - - /* There is no need to check for 'inout' here because the parser will - * only allow that in function parameter lists. - */ - if (this->type->qualifier.flags.q.attribute) { - mode = "attribute"; - } else if (this->type->qualifier.flags.q.uniform) { - mode = "uniform"; - } else if (this->type->qualifier.flags.q.varying) { - mode = "varying"; - } else if (this->type->qualifier.flags.q.in) { - mode = "in"; - extra = " or in function parameter list"; - } else if (this->type->qualifier.flags.q.out) { - mode = "out"; - extra = " or in function parameter list"; - } - - if (mode) { - _mesa_glsl_error(& loc, state, - "%s variable `%s' must be declared at " - "global scope%s", - mode, var->name, extra); - } - } else if (var->mode == ir_var_in) { - var->read_only = true; - - if (state->target == vertex_shader) { - bool error_emitted = false; - - /* From page 31 (page 37 of the PDF) of the GLSL 1.50 spec: - * - * "Vertex shader inputs can only be float, floating-point - * vectors, matrices, signed and unsigned integers and integer - * vectors. Vertex shader inputs can also form arrays of these - * types, but not structures." - * - * From page 31 (page 27 of the PDF) of the GLSL 1.30 spec: - * - * "Vertex shader inputs can only be float, floating-point - * vectors, matrices, signed and unsigned integers and integer - * vectors. They cannot be arrays or structures." - * - * From page 23 (page 29 of the PDF) of the GLSL 1.20 spec: - * - * "The attribute qualifier can be used only with float, - * floating-point vectors, and matrices. Attribute variables - * cannot be declared as arrays or structures." - */ - const glsl_type *check_type = var->type->is_array() - ? var->type->fields.array : var->type; - - switch (check_type->base_type) { - case GLSL_TYPE_FLOAT: - break; - case GLSL_TYPE_UINT: - case GLSL_TYPE_INT: - if (state->language_version > 120) - break; - /* FALLTHROUGH */ - default: - _mesa_glsl_error(& loc, state, - "vertex shader input / attribute cannot have " - "type %s`%s'", - var->type->is_array() ? "array of " : "", - check_type->name); - error_emitted = true; - } - - if (!error_emitted && (state->language_version <= 130) - && var->type->is_array()) { - _mesa_glsl_error(& loc, state, - "vertex shader input / attribute cannot have " - "array type"); - error_emitted = true; - } - } - } - - /* Integer vertex outputs must be qualified with 'flat'. - * - * From section 4.3.6 of the GLSL 1.30 spec: - * "If a vertex output is a signed or unsigned integer or integer - * vector, then it must be qualified with the interpolation qualifier - * flat." - */ - if (state->language_version >= 130 - && state->target == vertex_shader - && state->current_function == NULL - && var->type->is_integer() - && var->mode == ir_var_out - && var->interpolation != ir_var_flat) { - - _mesa_glsl_error(&loc, state, "If a vertex output is an integer, " - "then it must be qualified with 'flat'"); - } - - - /* Interpolation qualifiers cannot be applied to 'centroid' and - * 'centroid varying'. - * - * From page 29 (page 35 of the PDF) of the GLSL 1.30 spec: - * "interpolation qualifiers may only precede the qualifiers in, - * centroid in, out, or centroid out in a declaration. They do not apply - * to the deprecated storage qualifiers varying or centroid varying." - */ - if (state->language_version >= 130 - && this->type->qualifier.has_interpolation() - && this->type->qualifier.flags.q.varying) { - - const char *i = this->type->qualifier.interpolation_string(); - assert(i != NULL); - const char *s; - if (this->type->qualifier.flags.q.centroid) - s = "centroid varying"; - else - s = "varying"; - - _mesa_glsl_error(&loc, state, - "qualifier '%s' cannot be applied to the " - "deprecated storage qualifier '%s'", i, s); - } - - - /* Interpolation qualifiers can only apply to vertex shader outputs and - * fragment shader inputs. - * - * From page 29 (page 35 of the PDF) of the GLSL 1.30 spec: - * "Outputs from a vertex shader (out) and inputs to a fragment - * shader (in) can be further qualified with one or more of these - * interpolation qualifiers" - */ - if (state->language_version >= 130 - && this->type->qualifier.has_interpolation()) { - - const char *i = this->type->qualifier.interpolation_string(); - assert(i != NULL); - - switch (state->target) { - case vertex_shader: - if (this->type->qualifier.flags.q.in) { - _mesa_glsl_error(&loc, state, - "qualifier '%s' cannot be applied to vertex " - "shader inputs", i); - } - break; - case fragment_shader: - if (this->type->qualifier.flags.q.out) { - _mesa_glsl_error(&loc, state, - "qualifier '%s' cannot be applied to fragment " - "shader outputs", i); - } - break; - default: - assert(0); - } - } - - - /* From section 4.3.4 of the GLSL 1.30 spec: - * "It is an error to use centroid in in a vertex shader." - */ - if (state->language_version >= 130 - && this->type->qualifier.flags.q.centroid - && this->type->qualifier.flags.q.in - && state->target == vertex_shader) { - - _mesa_glsl_error(&loc, state, - "'centroid in' cannot be used in a vertex shader"); - } - - - /* Precision qualifiers exists only in GLSL versions 1.00 and >= 1.30. - */ - if (this->type->specifier->precision != ast_precision_none - && state->language_version != 100 - && state->language_version < 130) { - - _mesa_glsl_error(&loc, state, - "precision qualifiers are supported only in GLSL ES " - "1.00, and GLSL 1.30 and later"); - } - - - /* Precision qualifiers only apply to floating point and integer types. - * - * From section 4.5.2 of the GLSL 1.30 spec: - * "Any floating point or any integer declaration can have the type - * preceded by one of these precision qualifiers [...] Literal - * constants do not have precision qualifiers. Neither do Boolean - * variables. - */ - if (this->type->specifier->precision != ast_precision_none - && !var->type->is_float() - && !var->type->is_integer() - && !(var->type->is_array() - && (var->type->fields.array->is_float() - || var->type->fields.array->is_integer()))) { - - _mesa_glsl_error(&loc, state, - "precision qualifiers apply only to floating point " - "and integer types"); - } - - /* Process the initializer and add its instructions to a temporary - * list. This list will be added to the instruction stream (below) after - * the declaration is added. This is done because in some cases (such as - * redeclarations) the declaration may not actually be added to the - * instruction stream. - */ - exec_list initializer_instructions; - if (decl->initializer != NULL) { - YYLTYPE initializer_loc = decl->initializer->get_location(); - - /* From page 24 (page 30 of the PDF) of the GLSL 1.10 spec: - * - * "All uniform variables are read-only and are initialized either - * directly by an application via API commands, or indirectly by - * OpenGL." - */ - if ((state->language_version <= 110) - && (var->mode == ir_var_uniform)) { - _mesa_glsl_error(& initializer_loc, state, - "cannot initialize uniforms in GLSL 1.10"); - } - - if (var->type->is_sampler()) { - _mesa_glsl_error(& initializer_loc, state, - "cannot initialize samplers"); - } - - if ((var->mode == ir_var_in) && (state->current_function == NULL)) { - _mesa_glsl_error(& initializer_loc, state, - "cannot initialize %s shader input / %s", - _mesa_glsl_shader_target_name(state->target), - (state->target == vertex_shader) - ? "attribute" : "varying"); - } - - ir_dereference *const lhs = new(ctx) ir_dereference_variable(var); - ir_rvalue *rhs = decl->initializer->hir(&initializer_instructions, - state); - - /* Calculate the constant value if this is a const or uniform - * declaration. - */ - if (this->type->qualifier.flags.q.constant - || this->type->qualifier.flags.q.uniform) { - ir_rvalue *new_rhs = validate_assignment(state, var->type, rhs); - if (new_rhs != NULL) { - rhs = new_rhs; - - ir_constant *constant_value = rhs->constant_expression_value(); - if (!constant_value) { - _mesa_glsl_error(& initializer_loc, state, - "initializer of %s variable `%s' must be a " - "constant expression", - (this->type->qualifier.flags.q.constant) - ? "const" : "uniform", - decl->identifier); - if (var->type->is_numeric()) { - /* Reduce cascading errors. */ - var->constant_value = ir_constant::zero(ctx, var->type); - } - } else { - rhs = constant_value; - var->constant_value = constant_value; - } - } else { - _mesa_glsl_error(&initializer_loc, state, - "initializer of type %s cannot be assigned to " - "variable of type %s", - rhs->type->name, var->type->name); - if (var->type->is_numeric()) { - /* Reduce cascading errors. */ - var->constant_value = ir_constant::zero(ctx, var->type); - } - } - } - - if (rhs && !rhs->type->is_error()) { - bool temp = var->read_only; - if (this->type->qualifier.flags.q.constant) - var->read_only = false; - - /* Never emit code to initialize a uniform. - */ - const glsl_type *initializer_type; - if (!this->type->qualifier.flags.q.uniform) { - result = do_assignment(&initializer_instructions, state, - lhs, rhs, - this->get_location()); - initializer_type = result->type; - } else - initializer_type = rhs->type; - - /* If the declared variable is an unsized array, it must inherrit - * its full type from the initializer. A declaration such as - * - * uniform float a[] = float[](1.0, 2.0, 3.0, 3.0); - * - * becomes - * - * uniform float a[4] = float[](1.0, 2.0, 3.0, 3.0); - * - * The assignment generated in the if-statement (below) will also - * automatically handle this case for non-uniforms. - * - * If the declared variable is not an array, the types must - * already match exactly. As a result, the type assignment - * here can be done unconditionally. For non-uniforms the call - * to do_assignment can change the type of the initializer (via - * the implicit conversion rules). For uniforms the initializer - * must be a constant expression, and the type of that expression - * was validated above. - */ - var->type = initializer_type; - - var->read_only = temp; - } - } - - /* From page 23 (page 29 of the PDF) of the GLSL 1.10 spec: - * - * "It is an error to write to a const variable outside of - * its declaration, so they must be initialized when - * declared." - */ - if (this->type->qualifier.flags.q.constant && decl->initializer == NULL) { - _mesa_glsl_error(& loc, state, - "const declaration of `%s' must be initialized", - decl->identifier); - } - - /* Check if this declaration is actually a re-declaration, either to - * resize an array or add qualifiers to an existing variable. - * - * This is allowed for variables in the current scope, or when at - * global scope (for built-ins in the implicit outer scope). - */ - ir_variable *earlier = state->symbols->get_variable(decl->identifier); - if (earlier != NULL && (state->current_function == NULL || - state->symbols->name_declared_this_scope(decl->identifier))) { - - /* From page 24 (page 30 of the PDF) of the GLSL 1.50 spec, - * - * "It is legal to declare an array without a size and then - * later re-declare the same name as an array of the same - * type and specify a size." - */ - if ((earlier->type->array_size() == 0) - && var->type->is_array() - && (var->type->element_type() == earlier->type->element_type())) { - /* FINISHME: This doesn't match the qualifiers on the two - * FINISHME: declarations. It's not 100% clear whether this is - * FINISHME: required or not. - */ - - /* From page 54 (page 60 of the PDF) of the GLSL 1.20 spec: - * - * "The size [of gl_TexCoord] can be at most - * gl_MaxTextureCoords." - */ - const unsigned size = unsigned(var->type->array_size()); - if ((strcmp("gl_TexCoord", var->name) == 0) - && (size > state->Const.MaxTextureCoords)) { - YYLTYPE loc = this->get_location(); - - _mesa_glsl_error(& loc, state, "`gl_TexCoord' array size cannot " - "be larger than gl_MaxTextureCoords (%u)\n", - state->Const.MaxTextureCoords); - } else if ((size > 0) && (size <= earlier->max_array_access)) { - YYLTYPE loc = this->get_location(); - - _mesa_glsl_error(& loc, state, "array size must be > %u due to " - "previous access", - earlier->max_array_access); - } - - earlier->type = var->type; - delete var; - var = NULL; - } else if (state->ARB_fragment_coord_conventions_enable - && strcmp(var->name, "gl_FragCoord") == 0 - && earlier->type == var->type - && earlier->mode == var->mode) { - /* Allow redeclaration of gl_FragCoord for ARB_fcc layout - * qualifiers. - */ - earlier->origin_upper_left = var->origin_upper_left; - earlier->pixel_center_integer = var->pixel_center_integer; - - /* According to section 4.3.7 of the GLSL 1.30 spec, - * the following built-in varaibles can be redeclared with an - * interpolation qualifier: - * * gl_FrontColor - * * gl_BackColor - * * gl_FrontSecondaryColor - * * gl_BackSecondaryColor - * * gl_Color - * * gl_SecondaryColor - */ - } else if (state->language_version >= 130 - && (strcmp(var->name, "gl_FrontColor") == 0 - || strcmp(var->name, "gl_BackColor") == 0 - || strcmp(var->name, "gl_FrontSecondaryColor") == 0 - || strcmp(var->name, "gl_BackSecondaryColor") == 0 - || strcmp(var->name, "gl_Color") == 0 - || strcmp(var->name, "gl_SecondaryColor") == 0) - && earlier->type == var->type - && earlier->mode == var->mode) { - earlier->interpolation = var->interpolation; - - /* Layout qualifiers for gl_FragDepth. */ - } else if (state->AMD_conservative_depth_enable - && strcmp(var->name, "gl_FragDepth") == 0 - && earlier->type == var->type - && earlier->mode == var->mode) { - - /** From the AMD_conservative_depth spec: - * Within any shader, the first redeclarations of gl_FragDepth - * must appear before any use of gl_FragDepth. - */ - if (earlier->used) { - _mesa_glsl_error(&loc, state, - "the first redeclaration of gl_FragDepth " - "must appear before any use of gl_FragDepth"); - } - - /* Prevent inconsistent redeclaration of depth layout qualifier. */ - if (earlier->depth_layout != ir_depth_layout_none - && earlier->depth_layout != var->depth_layout) { - _mesa_glsl_error(&loc, state, - "gl_FragDepth: depth layout is declared here " - "as '%s, but it was previously declared as " - "'%s'", - depth_layout_string(var->depth_layout), - depth_layout_string(earlier->depth_layout)); - } - - earlier->depth_layout = var->depth_layout; - - } else { - YYLTYPE loc = this->get_location(); - _mesa_glsl_error(&loc, state, "`%s' redeclared", decl->identifier); - } - - continue; - } - - /* By now, we know it's a new variable declaration (we didn't hit the - * above "continue"). - * - * From page 15 (page 21 of the PDF) of the GLSL 1.10 spec, - * - * "Identifiers starting with "gl_" are reserved for use by - * OpenGL, and may not be declared in a shader as either a - * variable or a function." - */ - if (strncmp(decl->identifier, "gl_", 3) == 0) - _mesa_glsl_error(& loc, state, - "identifier `%s' uses reserved `gl_' prefix", - decl->identifier); - - /* Add the variable to the symbol table. Note that the initializer's - * IR was already processed earlier (though it hasn't been emitted yet), - * without the variable in scope. - * - * This differs from most C-like languages, but it follows the GLSL - * specification. From page 28 (page 34 of the PDF) of the GLSL 1.50 - * spec: - * - * "Within a declaration, the scope of a name starts immediately - * after the initializer if present or immediately after the name - * being declared if not." - */ - if (!state->symbols->add_variable(var)) { - YYLTYPE loc = this->get_location(); - _mesa_glsl_error(&loc, state, "name `%s' already taken in the " - "current scope", decl->identifier); - continue; - } - - /* Push the variable declaration to the top. It means that all - * the variable declarations will appear in a funny - * last-to-first order, but otherwise we run into trouble if a - * function is prototyped, a global var is decled, then the - * function is defined with usage of the global var. See - * glslparsertest's CorrectModule.frag. - */ - instructions->push_head(var); - instructions->append_list(&initializer_instructions); - } - - - /* Generally, variable declarations do not have r-values. However, - * one is used for the declaration in - * - * while (bool b = some_condition()) { - * ... - * } - * - * so we return the rvalue from the last seen declaration here. - */ - return result; -} - - -ir_rvalue * -ast_parameter_declarator::hir(exec_list *instructions, - struct _mesa_glsl_parse_state *state) -{ - void *ctx = state; - const struct glsl_type *type; - const char *name = NULL; - YYLTYPE loc = this->get_location(); - - type = this->type->specifier->glsl_type(& name, state); - - if (type == NULL) { - if (name != NULL) { - _mesa_glsl_error(& loc, state, - "invalid type `%s' in declaration of `%s'", - name, this->identifier); - } else { - _mesa_glsl_error(& loc, state, - "invalid type in declaration of `%s'", - this->identifier); - } - - type = glsl_type::error_type; - } - - /* From page 62 (page 68 of the PDF) of the GLSL 1.50 spec: - * - * "Functions that accept no input arguments need not use void in the - * argument list because prototypes (or definitions) are required and - * therefore there is no ambiguity when an empty argument list "( )" is - * declared. The idiom "(void)" as a parameter list is provided for - * convenience." - * - * Placing this check here prevents a void parameter being set up - * for a function, which avoids tripping up checks for main taking - * parameters and lookups of an unnamed symbol. - */ - if (type->is_void()) { - if (this->identifier != NULL) - _mesa_glsl_error(& loc, state, - "named parameter cannot have type `void'"); - - is_void = true; - return NULL; - } - - if (formal_parameter && (this->identifier == NULL)) { - _mesa_glsl_error(& loc, state, "formal parameter lacks a name"); - return NULL; - } - - /* This only handles "vec4 foo[..]". The earlier specifier->glsl_type(...) - * call already handled the "vec4[..] foo" case. - */ - if (this->is_array) { - type = process_array_type(&loc, type, this->array_size, state); - } - - if (type->array_size() == 0) { - _mesa_glsl_error(&loc, state, "arrays passed as parameters must have " - "a declared size."); - type = glsl_type::error_type; - } - - is_void = false; - ir_variable *var = new(ctx) ir_variable(type, this->identifier, ir_var_in); - - /* Apply any specified qualifiers to the parameter declaration. Note that - * for function parameters the default mode is 'in'. - */ - apply_type_qualifier_to_variable(& this->type->qualifier, var, state, & loc); - - instructions->push_tail(var); - - /* Parameter declarations do not have r-values. - */ - return NULL; -} - - -void -ast_parameter_declarator::parameters_to_hir(exec_list *ast_parameters, - bool formal, - exec_list *ir_parameters, - _mesa_glsl_parse_state *state) -{ - ast_parameter_declarator *void_param = NULL; - unsigned count = 0; - - foreach_list_typed (ast_parameter_declarator, param, link, ast_parameters) { - param->formal_parameter = formal; - param->hir(ir_parameters, state); - - if (param->is_void) - void_param = param; - - count++; - } - - if ((void_param != NULL) && (count > 1)) { - YYLTYPE loc = void_param->get_location(); - - _mesa_glsl_error(& loc, state, - "`void' parameter must be only parameter"); - } -} - - -void -emit_function(_mesa_glsl_parse_state *state, exec_list *instructions, - ir_function *f) -{ - /* Emit the new function header */ - if (state->current_function == NULL) { - instructions->push_tail(f); - } else { - /* IR invariants disallow function declarations or definitions nested - * within other function definitions. Insert the new ir_function - * block in the instruction sequence before the ir_function block - * containing the current ir_function_signature. - */ - ir_function *const curr = - const_cast<ir_function *>(state->current_function->function()); - - curr->insert_before(f); - } -} - - -ir_rvalue * -ast_function::hir(exec_list *instructions, - struct _mesa_glsl_parse_state *state) -{ - void *ctx = state; - ir_function *f = NULL; - ir_function_signature *sig = NULL; - exec_list hir_parameters; - - const char *const name = identifier; - - /* From page 21 (page 27 of the PDF) of the GLSL 1.20 spec, - * - * "Function declarations (prototypes) cannot occur inside of functions; - * they must be at global scope, or for the built-in functions, outside - * the global scope." - * - * From page 27 (page 33 of the PDF) of the GLSL ES 1.00.16 spec, - * - * "User defined functions may only be defined within the global scope." - * - * Note that this language does not appear in GLSL 1.10. - */ - if ((state->current_function != NULL) && (state->language_version != 110)) { - YYLTYPE loc = this->get_location(); - _mesa_glsl_error(&loc, state, - "declaration of function `%s' not allowed within " - "function body", name); - } - - /* From page 15 (page 21 of the PDF) of the GLSL 1.10 spec, - * - * "Identifiers starting with "gl_" are reserved for use by - * OpenGL, and may not be declared in a shader as either a - * variable or a function." - */ - if (strncmp(name, "gl_", 3) == 0) { - YYLTYPE loc = this->get_location(); - _mesa_glsl_error(&loc, state, - "identifier `%s' uses reserved `gl_' prefix", name); - } - - /* Convert the list of function parameters to HIR now so that they can be - * used below to compare this function's signature with previously seen - * signatures for functions with the same name. - */ - ast_parameter_declarator::parameters_to_hir(& this->parameters, - is_definition, - & hir_parameters, state); - - const char *return_type_name; - const glsl_type *return_type = - this->return_type->specifier->glsl_type(& return_type_name, state); - - if (!return_type) { - YYLTYPE loc = this->get_location(); - _mesa_glsl_error(&loc, state, - "function `%s' has undeclared return type `%s'", - name, return_type_name); - return_type = glsl_type::error_type; - } - - /* From page 56 (page 62 of the PDF) of the GLSL 1.30 spec: - * "No qualifier is allowed on the return type of a function." - */ - if (this->return_type->has_qualifiers()) { - YYLTYPE loc = this->get_location(); - _mesa_glsl_error(& loc, state, - "function `%s' return type has qualifiers", name); - } - - /* Verify that this function's signature either doesn't match a previously - * seen signature for a function with the same name, or, if a match is found, - * that the previously seen signature does not have an associated definition. - */ - f = state->symbols->get_function(name); - if (f != NULL && (state->es_shader || f->has_user_signature())) { - sig = f->exact_matching_signature(&hir_parameters); - if (sig != NULL) { - const char *badvar = sig->qualifiers_match(&hir_parameters); - if (badvar != NULL) { - YYLTYPE loc = this->get_location(); - - _mesa_glsl_error(&loc, state, "function `%s' parameter `%s' " - "qualifiers don't match prototype", name, badvar); - } - - if (sig->return_type != return_type) { - YYLTYPE loc = this->get_location(); - - _mesa_glsl_error(&loc, state, "function `%s' return type doesn't " - "match prototype", name); - } - - if (is_definition && sig->is_defined) { - YYLTYPE loc = this->get_location(); - - _mesa_glsl_error(& loc, state, "function `%s' redefined", name); - } - } - } else { - f = new(ctx) ir_function(name); - if (!state->symbols->add_function(f)) { - /* This function name shadows a non-function use of the same name. */ - YYLTYPE loc = this->get_location(); - - _mesa_glsl_error(&loc, state, "function name `%s' conflicts with " - "non-function", name); - return NULL; - } - - emit_function(state, instructions, f); - } - - /* Verify the return type of main() */ - if (strcmp(name, "main") == 0) { - if (! return_type->is_void()) { - YYLTYPE loc = this->get_location(); - - _mesa_glsl_error(& loc, state, "main() must return void"); - } - - if (!hir_parameters.is_empty()) { - YYLTYPE loc = this->get_location(); - - _mesa_glsl_error(& loc, state, "main() must not take any parameters"); - } - } - - /* Finish storing the information about this new function in its signature. - */ - if (sig == NULL) { - sig = new(ctx) ir_function_signature(return_type); - f->add_signature(sig); - } - - sig->replace_parameters(&hir_parameters); - signature = sig; - - /* Function declarations (prototypes) do not have r-values. - */ - return NULL; -} - - -ir_rvalue * -ast_function_definition::hir(exec_list *instructions, - struct _mesa_glsl_parse_state *state) -{ - prototype->is_definition = true; - prototype->hir(instructions, state); - - ir_function_signature *signature = prototype->signature; - if (signature == NULL) - return NULL; - - assert(state->current_function == NULL); - state->current_function = signature; - state->found_return = false; - - /* Duplicate parameters declared in the prototype as concrete variables. - * Add these to the symbol table. - */ - state->symbols->push_scope(); - foreach_iter(exec_list_iterator, iter, signature->parameters) { - ir_variable *const var = ((ir_instruction *) iter.get())->as_variable(); - - assert(var != NULL); - - /* The only way a parameter would "exist" is if two parameters have - * the same name. - */ - if (state->symbols->name_declared_this_scope(var->name)) { - YYLTYPE loc = this->get_location(); - - _mesa_glsl_error(& loc, state, "parameter `%s' redeclared", var->name); - } else { - state->symbols->add_variable(var); - } - } - - /* Convert the body of the function to HIR. */ - this->body->hir(&signature->body, state); - signature->is_defined = true; - - state->symbols->pop_scope(); - - assert(state->current_function == signature); - state->current_function = NULL; - - if (!signature->return_type->is_void() && !state->found_return) { - YYLTYPE loc = this->get_location(); - _mesa_glsl_error(& loc, state, "function `%s' has non-void return type " - "%s, but no return statement", - signature->function_name(), - signature->return_type->name); - } - - /* Function definitions do not have r-values. - */ - return NULL; -} - - -ir_rvalue * -ast_jump_statement::hir(exec_list *instructions, - struct _mesa_glsl_parse_state *state) -{ - void *ctx = state; - - switch (mode) { - case ast_return: { - ir_return *inst; - assert(state->current_function); - - if (opt_return_value) { - ir_rvalue *const ret = opt_return_value->hir(instructions, state); - - /* The value of the return type can be NULL if the shader says - * 'return foo();' and foo() is a function that returns void. - * - * NOTE: The GLSL spec doesn't say that this is an error. The type - * of the return value is void. If the return type of the function is - * also void, then this should compile without error. Seriously. - */ - const glsl_type *const ret_type = - (ret == NULL) ? glsl_type::void_type : ret->type; - - /* Implicit conversions are not allowed for return values. */ - if (state->current_function->return_type != ret_type) { - YYLTYPE loc = this->get_location(); - - _mesa_glsl_error(& loc, state, - "`return' with wrong type %s, in function `%s' " - "returning %s", - ret_type->name, - state->current_function->function_name(), - state->current_function->return_type->name); - } - - inst = new(ctx) ir_return(ret); - } else { - if (state->current_function->return_type->base_type != - GLSL_TYPE_VOID) { - YYLTYPE loc = this->get_location(); - - _mesa_glsl_error(& loc, state, - "`return' with no value, in function %s returning " - "non-void", - state->current_function->function_name()); - } - inst = new(ctx) ir_return; - } - - state->found_return = true; - instructions->push_tail(inst); - break; - } - - case ast_discard: - if (state->target != fragment_shader) { - YYLTYPE loc = this->get_location(); - - _mesa_glsl_error(& loc, state, - "`discard' may only appear in a fragment shader"); - } - instructions->push_tail(new(ctx) ir_discard); - break; - - case ast_break: - case ast_continue: - /* FINISHME: Handle switch-statements. They cannot contain 'continue', - * FINISHME: and they use a different IR instruction for 'break'. - */ - /* FINISHME: Correctly handle the nesting. If a switch-statement is - * FINISHME: inside a loop, a 'continue' is valid and will bind to the - * FINISHME: loop. - */ - if (state->loop_or_switch_nesting == NULL) { - YYLTYPE loc = this->get_location(); - - _mesa_glsl_error(& loc, state, - "`%s' may only appear in a loop", - (mode == ast_break) ? "break" : "continue"); - } else { - ir_loop *const loop = state->loop_or_switch_nesting->as_loop(); - - /* Inline the for loop expression again, since we don't know - * where near the end of the loop body the normal copy of it - * is going to be placed. - */ - if (mode == ast_continue && - state->loop_or_switch_nesting_ast->rest_expression) { - state->loop_or_switch_nesting_ast->rest_expression->hir(instructions, - state); - } - - if (loop != NULL) { - ir_loop_jump *const jump = - new(ctx) ir_loop_jump((mode == ast_break) - ? ir_loop_jump::jump_break - : ir_loop_jump::jump_continue); - instructions->push_tail(jump); - } - } - - break; - } - - /* Jump instructions do not have r-values. - */ - return NULL; -} - - -ir_rvalue * -ast_selection_statement::hir(exec_list *instructions, - struct _mesa_glsl_parse_state *state) -{ - void *ctx = state; - - ir_rvalue *const condition = this->condition->hir(instructions, state); - - /* From page 66 (page 72 of the PDF) of the GLSL 1.50 spec: - * - * "Any expression whose type evaluates to a Boolean can be used as the - * conditional expression bool-expression. Vector types are not accepted - * as the expression to if." - * - * The checks are separated so that higher quality diagnostics can be - * generated for cases where both rules are violated. - */ - if (!condition->type->is_boolean() || !condition->type->is_scalar()) { - YYLTYPE loc = this->condition->get_location(); - - _mesa_glsl_error(& loc, state, "if-statement condition must be scalar " - "boolean"); - } - - ir_if *const stmt = new(ctx) ir_if(condition); - - if (then_statement != NULL) { - state->symbols->push_scope(); - then_statement->hir(& stmt->then_instructions, state); - state->symbols->pop_scope(); - } - - if (else_statement != NULL) { - state->symbols->push_scope(); - else_statement->hir(& stmt->else_instructions, state); - state->symbols->pop_scope(); - } - - instructions->push_tail(stmt); - - /* if-statements do not have r-values. - */ - return NULL; -} - - -void -ast_iteration_statement::condition_to_hir(ir_loop *stmt, - struct _mesa_glsl_parse_state *state) -{ - void *ctx = state; - - if (condition != NULL) { - ir_rvalue *const cond = - condition->hir(& stmt->body_instructions, state); - - if ((cond == NULL) - || !cond->type->is_boolean() || !cond->type->is_scalar()) { - YYLTYPE loc = condition->get_location(); - - _mesa_glsl_error(& loc, state, - "loop condition must be scalar boolean"); - } else { - /* As the first code in the loop body, generate a block that looks - * like 'if (!condition) break;' as the loop termination condition. - */ - ir_rvalue *const not_cond = - new(ctx) ir_expression(ir_unop_logic_not, glsl_type::bool_type, cond, - NULL); - - ir_if *const if_stmt = new(ctx) ir_if(not_cond); - - ir_jump *const break_stmt = - new(ctx) ir_loop_jump(ir_loop_jump::jump_break); - - if_stmt->then_instructions.push_tail(break_stmt); - stmt->body_instructions.push_tail(if_stmt); - } - } -} - - -ir_rvalue * -ast_iteration_statement::hir(exec_list *instructions, - struct _mesa_glsl_parse_state *state) -{ - void *ctx = state; - - /* For-loops and while-loops start a new scope, but do-while loops do not. - */ - if (mode != ast_do_while) - state->symbols->push_scope(); - - if (init_statement != NULL) - init_statement->hir(instructions, state); - - ir_loop *const stmt = new(ctx) ir_loop(); - instructions->push_tail(stmt); - - /* Track the current loop and / or switch-statement nesting. - */ - ir_instruction *const nesting = state->loop_or_switch_nesting; - ast_iteration_statement *nesting_ast = state->loop_or_switch_nesting_ast; - - state->loop_or_switch_nesting = stmt; - state->loop_or_switch_nesting_ast = this; - - if (mode != ast_do_while) - condition_to_hir(stmt, state); - - if (body != NULL) - body->hir(& stmt->body_instructions, state); - - if (rest_expression != NULL) - rest_expression->hir(& stmt->body_instructions, state); - - if (mode == ast_do_while) - condition_to_hir(stmt, state); - - if (mode != ast_do_while) - state->symbols->pop_scope(); - - /* Restore previous nesting before returning. - */ - state->loop_or_switch_nesting = nesting; - state->loop_or_switch_nesting_ast = nesting_ast; - - /* Loops do not have r-values. - */ - return NULL; -} - - -ir_rvalue * -ast_type_specifier::hir(exec_list *instructions, - struct _mesa_glsl_parse_state *state) -{ - if (!this->is_precision_statement && this->structure == NULL) - return NULL; - - YYLTYPE loc = this->get_location(); - - if (this->precision != ast_precision_none - && state->language_version != 100 - && state->language_version < 130) { - _mesa_glsl_error(&loc, state, - "precision qualifiers exist only in " - "GLSL ES 1.00, and GLSL 1.30 and later"); - return NULL; - } - if (this->precision != ast_precision_none - && this->structure != NULL) { - _mesa_glsl_error(&loc, state, - "precision qualifiers do not apply to structures"); - return NULL; - } - - /* If this is a precision statement, check that the type to which it is - * applied is either float or int. - * - * From section 4.5.3 of the GLSL 1.30 spec: - * "The precision statement - * precision precision-qualifier type; - * can be used to establish a default precision qualifier. The type - * field can be either int or float [...]. Any other types or - * qualifiers will result in an error. - */ - if (this->is_precision_statement) { - assert(this->precision != ast_precision_none); - assert(this->structure == NULL); /* The check for structures was - * performed above. */ - if (this->is_array) { - _mesa_glsl_error(&loc, state, - "default precision statements do not apply to " - "arrays"); - return NULL; - } - if (this->type_specifier != ast_float - && this->type_specifier != ast_int) { - _mesa_glsl_error(&loc, state, - "default precision statements apply only to types " - "float and int"); - return NULL; - } - - /* FINISHME: Translate precision statements into IR. */ - return NULL; - } - - if (this->structure != NULL) - return this->structure->hir(instructions, state); - - return NULL; -} - - -ir_rvalue * -ast_struct_specifier::hir(exec_list *instructions, - struct _mesa_glsl_parse_state *state) -{ - unsigned decl_count = 0; - - /* Make an initial pass over the list of structure fields to determine how - * many there are. Each element in this list is an ast_declarator_list. - * This means that we actually need to count the number of elements in the - * 'declarations' list in each of the elements. - */ - foreach_list_typed (ast_declarator_list, decl_list, link, - &this->declarations) { - foreach_list_const (decl_ptr, & decl_list->declarations) { - decl_count++; - } - } - - /* Allocate storage for the structure fields and process the field - * declarations. As the declarations are processed, try to also convert - * the types to HIR. This ensures that structure definitions embedded in - * other structure definitions are processed. - */ - glsl_struct_field *const fields = ralloc_array(state, glsl_struct_field, - decl_count); - - unsigned i = 0; - foreach_list_typed (ast_declarator_list, decl_list, link, - &this->declarations) { - const char *type_name; - - decl_list->type->specifier->hir(instructions, state); - - /* Section 10.9 of the GLSL ES 1.00 specification states that - * embedded structure definitions have been removed from the language. - */ - if (state->es_shader && decl_list->type->specifier->structure != NULL) { - YYLTYPE loc = this->get_location(); - _mesa_glsl_error(&loc, state, "Embedded structure definitions are " - "not allowed in GLSL ES 1.00."); - } - - const glsl_type *decl_type = - decl_list->type->specifier->glsl_type(& type_name, state); - - foreach_list_typed (ast_declaration, decl, link, - &decl_list->declarations) { - const struct glsl_type *field_type = decl_type; - if (decl->is_array) { - YYLTYPE loc = decl->get_location(); - field_type = process_array_type(&loc, decl_type, decl->array_size, - state); - } - fields[i].type = (field_type != NULL) - ? field_type : glsl_type::error_type; - fields[i].name = decl->identifier; - i++; - } - } - - assert(i == decl_count); - - const glsl_type *t = - glsl_type::get_record_instance(fields, decl_count, this->name); - - YYLTYPE loc = this->get_location(); - if (!state->symbols->add_type(name, t)) { - _mesa_glsl_error(& loc, state, "struct `%s' previously defined", name); - } else { - const glsl_type **s = reralloc(state, state->user_structures, - const glsl_type *, - state->num_user_structures + 1); - if (s != NULL) { - s[state->num_user_structures] = t; - state->user_structures = s; - state->num_user_structures++; - } - } - - /* Structure type definitions do not have r-values. - */ - return NULL; -} +/*
+ * Copyright © 2010 Intel Corporation
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice (including the next
+ * paragraph) shall be included in all copies or substantial portions of the
+ * Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+ * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
+ * DEALINGS IN THE SOFTWARE.
+ */
+
+/**
+ * \file ast_to_hir.c
+ * Convert abstract syntax to to high-level intermediate reprensentation (HIR).
+ *
+ * During the conversion to HIR, the majority of the symantic checking is
+ * preformed on the program. This includes:
+ *
+ * * Symbol table management
+ * * Type checking
+ * * Function binding
+ *
+ * The majority of this work could be done during parsing, and the parser could
+ * probably generate HIR directly. However, this results in frequent changes
+ * to the parser code. Since we do not assume that every system this complier
+ * is built on will have Flex and Bison installed, we have to store the code
+ * generated by these tools in our version control system. In other parts of
+ * the system we've seen problems where a parser was changed but the generated
+ * code was not committed, merge conflicts where created because two developers
+ * had slightly different versions of Bison installed, etc.
+ *
+ * I have also noticed that running Bison generated parsers in GDB is very
+ * irritating. When you get a segfault on '$$ = $1->foo', you can't very
+ * well 'print $1' in GDB.
+ *
+ * As a result, my preference is to put as little C code as possible in the
+ * parser (and lexer) sources.
+ */
+
+#include "main/core.h" /* for struct gl_extensions */
+#include "glsl_symbol_table.h"
+#include "glsl_parser_extras.h"
+#include "ast.h"
+#include "glsl_types.h"
+#include "ir.h"
+
+void
+_mesa_ast_to_hir(exec_list *instructions, struct _mesa_glsl_parse_state *state)
+{
+ _mesa_glsl_initialize_variables(instructions, state);
+ _mesa_glsl_initialize_functions(state);
+
+ state->symbols->language_version = state->language_version;
+
+ state->current_function = NULL;
+
+ /* Section 4.2 of the GLSL 1.20 specification states:
+ * "The built-in functions are scoped in a scope outside the global scope
+ * users declare global variables in. That is, a shader's global scope,
+ * available for user-defined functions and global variables, is nested
+ * inside the scope containing the built-in functions."
+ *
+ * Since built-in functions like ftransform() access built-in variables,
+ * it follows that those must be in the outer scope as well.
+ *
+ * We push scope here to create this nesting effect...but don't pop.
+ * This way, a shader's globals are still in the symbol table for use
+ * by the linker.
+ */
+ state->symbols->push_scope();
+
+ foreach_list_typed (ast_node, ast, link, & state->translation_unit)
+ ast->hir(instructions, state);
+}
+
+
+/**
+ * If a conversion is available, convert one operand to a different type
+ *
+ * The \c from \c ir_rvalue is converted "in place".
+ *
+ * \param to Type that the operand it to be converted to
+ * \param from Operand that is being converted
+ * \param state GLSL compiler state
+ *
+ * \return
+ * If a conversion is possible (or unnecessary), \c true is returned.
+ * Otherwise \c false is returned.
+ */
+bool
+apply_implicit_conversion(const glsl_type *to, ir_rvalue * &from,
+ struct _mesa_glsl_parse_state *state)
+{
+ void *ctx = state;
+ if (to->base_type == from->type->base_type)
+ return true;
+
+ /* This conversion was added in GLSL 1.20. If the compilation mode is
+ * GLSL 1.10, the conversion is skipped.
+ */
+ if (state->language_version < 120)
+ return false;
+
+ /* From page 27 (page 33 of the PDF) of the GLSL 1.50 spec:
+ *
+ * "There are no implicit array or structure conversions. For
+ * example, an array of int cannot be implicitly converted to an
+ * array of float. There are no implicit conversions between
+ * signed and unsigned integers."
+ */
+ /* FINISHME: The above comment is partially a lie. There is int/uint
+ * FINISHME: conversion for immediate constants.
+ */
+ if (!to->is_float() || !from->type->is_numeric())
+ return false;
+
+ /* Convert to a floating point type with the same number of components
+ * as the original type - i.e. int to float, not int to vec4.
+ */
+ to = glsl_type::get_instance(GLSL_TYPE_FLOAT, from->type->vector_elements,
+ from->type->matrix_columns);
+
+ switch (from->type->base_type) {
+ case GLSL_TYPE_INT:
+ from = new(ctx) ir_expression(ir_unop_i2f, to, from, NULL);
+ break;
+ case GLSL_TYPE_UINT:
+ from = new(ctx) ir_expression(ir_unop_u2f, to, from, NULL);
+ break;
+ case GLSL_TYPE_BOOL:
+ from = new(ctx) ir_expression(ir_unop_b2f, to, from, NULL);
+ break;
+ default:
+ assert(0);
+ }
+
+ return true;
+}
+
+
+static const struct glsl_type *
+arithmetic_result_type(ir_rvalue * &value_a, ir_rvalue * &value_b,
+ bool multiply,
+ struct _mesa_glsl_parse_state *state, YYLTYPE *loc)
+{
+ const glsl_type *type_a = value_a->type;
+ const glsl_type *type_b = value_b->type;
+
+ /* From GLSL 1.50 spec, page 56:
+ *
+ * "The arithmetic binary operators add (+), subtract (-),
+ * multiply (*), and divide (/) operate on integer and
+ * floating-point scalars, vectors, and matrices."
+ */
+ if (!type_a->is_numeric() || !type_b->is_numeric()) {
+ _mesa_glsl_error(loc, state,
+ "Operands to arithmetic operators must be numeric");
+ return glsl_type::error_type;
+ }
+
+
+ /* "If one operand is floating-point based and the other is
+ * not, then the conversions from Section 4.1.10 "Implicit
+ * Conversions" are applied to the non-floating-point-based operand."
+ */
+ if (!apply_implicit_conversion(type_a, value_b, state)
+ && !apply_implicit_conversion(type_b, value_a, state)) {
+ _mesa_glsl_error(loc, state,
+ "Could not implicitly convert operands to "
+ "arithmetic operator");
+ return glsl_type::error_type;
+ }
+ type_a = value_a->type;
+ type_b = value_b->type;
+
+ /* "If the operands are integer types, they must both be signed or
+ * both be unsigned."
+ *
+ * From this rule and the preceeding conversion it can be inferred that
+ * both types must be GLSL_TYPE_FLOAT, or GLSL_TYPE_UINT, or GLSL_TYPE_INT.
+ * The is_numeric check above already filtered out the case where either
+ * type is not one of these, so now the base types need only be tested for
+ * equality.
+ */
+ if (type_a->base_type != type_b->base_type) {
+ _mesa_glsl_error(loc, state,
+ "base type mismatch for arithmetic operator");
+ return glsl_type::error_type;
+ }
+
+ /* "All arithmetic binary operators result in the same fundamental type
+ * (signed integer, unsigned integer, or floating-point) as the
+ * operands they operate on, after operand type conversion. After
+ * conversion, the following cases are valid
+ *
+ * * The two operands are scalars. In this case the operation is
+ * applied, resulting in a scalar."
+ */
+ if (type_a->is_scalar() && type_b->is_scalar())
+ return type_a;
+
+ /* "* One operand is a scalar, and the other is a vector or matrix.
+ * In this case, the scalar operation is applied independently to each
+ * component of the vector or matrix, resulting in the same size
+ * vector or matrix."
+ */
+ if (type_a->is_scalar()) {
+ if (!type_b->is_scalar())
+ return type_b;
+ } else if (type_b->is_scalar()) {
+ return type_a;
+ }
+
+ /* All of the combinations of <scalar, scalar>, <vector, scalar>,
+ * <scalar, vector>, <scalar, matrix>, and <matrix, scalar> have been
+ * handled.
+ */
+ assert(!type_a->is_scalar());
+ assert(!type_b->is_scalar());
+
+ /* "* The two operands are vectors of the same size. In this case, the
+ * operation is done component-wise resulting in the same size
+ * vector."
+ */
+ if (type_a->is_vector() && type_b->is_vector()) {
+ if (type_a == type_b) {
+ return type_a;
+ } else {
+ _mesa_glsl_error(loc, state,
+ "vector size mismatch for arithmetic operator");
+ return glsl_type::error_type;
+ }
+ }
+
+ /* All of the combinations of <scalar, scalar>, <vector, scalar>,
+ * <scalar, vector>, <scalar, matrix>, <matrix, scalar>, and
+ * <vector, vector> have been handled. At least one of the operands must
+ * be matrix. Further, since there are no integer matrix types, the base
+ * type of both operands must be float.
+ */
+ assert(type_a->is_matrix() || type_b->is_matrix());
+ assert(type_a->base_type == GLSL_TYPE_FLOAT);
+ assert(type_b->base_type == GLSL_TYPE_FLOAT);
+
+ /* "* The operator is add (+), subtract (-), or divide (/), and the
+ * operands are matrices with the same number of rows and the same
+ * number of columns. In this case, the operation is done component-
+ * wise resulting in the same size matrix."
+ * * The operator is multiply (*), where both operands are matrices or
+ * one operand is a vector and the other a matrix. A right vector
+ * operand is treated as a column vector and a left vector operand as a
+ * row vector. In all these cases, it is required that the number of
+ * columns of the left operand is equal to the number of rows of the
+ * right operand. Then, the multiply (*) operation does a linear
+ * algebraic multiply, yielding an object that has the same number of
+ * rows as the left operand and the same number of columns as the right
+ * operand. Section 5.10 "Vector and Matrix Operations" explains in
+ * more detail how vectors and matrices are operated on."
+ */
+ if (! multiply) {
+ if (type_a == type_b)
+ return type_a;
+ } else {
+ if (type_a->is_matrix() && type_b->is_matrix()) {
+ /* Matrix multiply. The columns of A must match the rows of B. Given
+ * the other previously tested constraints, this means the vector type
+ * of a row from A must be the same as the vector type of a column from
+ * B.
+ */
+ if (type_a->row_type() == type_b->column_type()) {
+ /* The resulting matrix has the number of columns of matrix B and
+ * the number of rows of matrix A. We get the row count of A by
+ * looking at the size of a vector that makes up a column. The
+ * transpose (size of a row) is done for B.
+ */
+ const glsl_type *const type =
+ glsl_type::get_instance(type_a->base_type,
+ type_a->column_type()->vector_elements,
+ type_b->row_type()->vector_elements);
+ assert(type != glsl_type::error_type);
+
+ return type;
+ }
+ } else if (type_a->is_matrix()) {
+ /* A is a matrix and B is a column vector. Columns of A must match
+ * rows of B. Given the other previously tested constraints, this
+ * means the vector type of a row from A must be the same as the
+ * vector the type of B.
+ */
+ if (type_a->row_type() == type_b) {
+ /* The resulting vector has a number of elements equal to
+ * the number of rows of matrix A. */
+ const glsl_type *const type =
+ glsl_type::get_instance(type_a->base_type,
+ type_a->column_type()->vector_elements,
+ 1);
+ assert(type != glsl_type::error_type);
+
+ return type;
+ }
+ } else {
+ assert(type_b->is_matrix());
+
+ /* A is a row vector and B is a matrix. Columns of A must match rows
+ * of B. Given the other previously tested constraints, this means
+ * the type of A must be the same as the vector type of a column from
+ * B.
+ */
+ if (type_a == type_b->column_type()) {
+ /* The resulting vector has a number of elements equal to
+ * the number of columns of matrix B. */
+ const glsl_type *const type =
+ glsl_type::get_instance(type_a->base_type,
+ type_b->row_type()->vector_elements,
+ 1);
+ assert(type != glsl_type::error_type);
+
+ return type;
+ }
+ }
+
+ _mesa_glsl_error(loc, state, "size mismatch for matrix multiplication");
+ return glsl_type::error_type;
+ }
+
+
+ /* "All other cases are illegal."
+ */
+ _mesa_glsl_error(loc, state, "type mismatch");
+ return glsl_type::error_type;
+}
+
+
+static const struct glsl_type *
+unary_arithmetic_result_type(const struct glsl_type *type,
+ struct _mesa_glsl_parse_state *state, YYLTYPE *loc)
+{
+ /* From GLSL 1.50 spec, page 57:
+ *
+ * "The arithmetic unary operators negate (-), post- and pre-increment
+ * and decrement (-- and ++) operate on integer or floating-point
+ * values (including vectors and matrices). All unary operators work
+ * component-wise on their operands. These result with the same type
+ * they operated on."
+ */
+ if (!type->is_numeric()) {
+ _mesa_glsl_error(loc, state,
+ "Operands to arithmetic operators must be numeric");
+ return glsl_type::error_type;
+ }
+
+ return type;
+}
+
+/**
+ * \brief Return the result type of a bit-logic operation.
+ *
+ * If the given types to the bit-logic operator are invalid, return
+ * glsl_type::error_type.
+ *
+ * \param type_a Type of LHS of bit-logic op
+ * \param type_b Type of RHS of bit-logic op
+ */
+static const struct glsl_type *
+bit_logic_result_type(const struct glsl_type *type_a,
+ const struct glsl_type *type_b,
+ ast_operators op,
+ struct _mesa_glsl_parse_state *state, YYLTYPE *loc)
+{
+ if (state->language_version < 130) {
+ _mesa_glsl_error(loc, state, "bit operations require GLSL 1.30");
+ return glsl_type::error_type;
+ }
+
+ /* From page 50 (page 56 of PDF) of GLSL 1.30 spec:
+ *
+ * "The bitwise operators and (&), exclusive-or (^), and inclusive-or
+ * (|). The operands must be of type signed or unsigned integers or
+ * integer vectors."
+ */
+ if (!type_a->is_integer()) {
+ _mesa_glsl_error(loc, state, "LHS of `%s' must be an integer",
+ ast_expression::operator_string(op));
+ return glsl_type::error_type;
+ }
+ if (!type_b->is_integer()) {
+ _mesa_glsl_error(loc, state, "RHS of `%s' must be an integer",
+ ast_expression::operator_string(op));
+ return glsl_type::error_type;
+ }
+
+ /* "The fundamental types of the operands (signed or unsigned) must
+ * match,"
+ */
+ if (type_a->base_type != type_b->base_type) {
+ _mesa_glsl_error(loc, state, "operands of `%s' must have the same "
+ "base type", ast_expression::operator_string(op));
+ return glsl_type::error_type;
+ }
+
+ /* "The operands cannot be vectors of differing size." */
+ if (type_a->is_vector() &&
+ type_b->is_vector() &&
+ type_a->vector_elements != type_b->vector_elements) {
+ _mesa_glsl_error(loc, state, "operands of `%s' cannot be vectors of "
+ "different sizes", ast_expression::operator_string(op));
+ return glsl_type::error_type;
+ }
+
+ /* "If one operand is a scalar and the other a vector, the scalar is
+ * applied component-wise to the vector, resulting in the same type as
+ * the vector. The fundamental types of the operands [...] will be the
+ * resulting fundamental type."
+ */
+ if (type_a->is_scalar())
+ return type_b;
+ else
+ return type_a;
+}
+
+static const struct glsl_type *
+modulus_result_type(const struct glsl_type *type_a,
+ const struct glsl_type *type_b,
+ struct _mesa_glsl_parse_state *state, YYLTYPE *loc)
+{
+ if (state->language_version < 130) {
+ _mesa_glsl_error(loc, state,
+ "operator '%%' is reserved in %s",
+ state->version_string);
+ return glsl_type::error_type;
+ }
+
+ /* From GLSL 1.50 spec, page 56:
+ * "The operator modulus (%) operates on signed or unsigned integers or
+ * integer vectors. The operand types must both be signed or both be
+ * unsigned."
+ */
+ if (!type_a->is_integer() || !type_b->is_integer()
+ || (type_a->base_type != type_b->base_type)) {
+ _mesa_glsl_error(loc, state, "type mismatch");
+ return glsl_type::error_type;
+ }
+
+ /* "The operands cannot be vectors of differing size. If one operand is
+ * a scalar and the other vector, then the scalar is applied component-
+ * wise to the vector, resulting in the same type as the vector. If both
+ * are vectors of the same size, the result is computed component-wise."
+ */
+ if (type_a->is_vector()) {
+ if (!type_b->is_vector()
+ || (type_a->vector_elements == type_b->vector_elements))
+ return type_a;
+ } else
+ return type_b;
+
+ /* "The operator modulus (%) is not defined for any other data types
+ * (non-integer types)."
+ */
+ _mesa_glsl_error(loc, state, "type mismatch");
+ return glsl_type::error_type;
+}
+
+
+static const struct glsl_type *
+relational_result_type(ir_rvalue * &value_a, ir_rvalue * &value_b,
+ struct _mesa_glsl_parse_state *state, YYLTYPE *loc)
+{
+ const glsl_type *type_a = value_a->type;
+ const glsl_type *type_b = value_b->type;
+
+ /* From GLSL 1.50 spec, page 56:
+ * "The relational operators greater than (>), less than (<), greater
+ * than or equal (>=), and less than or equal (<=) operate only on
+ * scalar integer and scalar floating-point expressions."
+ */
+ if (!type_a->is_numeric()
+ || !type_b->is_numeric()
+ || !type_a->is_scalar()
+ || !type_b->is_scalar()) {
+ _mesa_glsl_error(loc, state,
+ "Operands to relational operators must be scalar and "
+ "numeric");
+ return glsl_type::error_type;
+ }
+
+ /* "Either the operands' types must match, or the conversions from
+ * Section 4.1.10 "Implicit Conversions" will be applied to the integer
+ * operand, after which the types must match."
+ */
+ if (!apply_implicit_conversion(type_a, value_b, state)
+ && !apply_implicit_conversion(type_b, value_a, state)) {
+ _mesa_glsl_error(loc, state,
+ "Could not implicitly convert operands to "
+ "relational operator");
+ return glsl_type::error_type;
+ }
+ type_a = value_a->type;
+ type_b = value_b->type;
+
+ if (type_a->base_type != type_b->base_type) {
+ _mesa_glsl_error(loc, state, "base type mismatch");
+ return glsl_type::error_type;
+ }
+
+ /* "The result is scalar Boolean."
+ */
+ return glsl_type::bool_type;
+}
+
+/**
+ * \brief Return the result type of a bit-shift operation.
+ *
+ * If the given types to the bit-shift operator are invalid, return
+ * glsl_type::error_type.
+ *
+ * \param type_a Type of LHS of bit-shift op
+ * \param type_b Type of RHS of bit-shift op
+ */
+static const struct glsl_type *
+shift_result_type(const struct glsl_type *type_a,
+ const struct glsl_type *type_b,
+ ast_operators op,
+ struct _mesa_glsl_parse_state *state, YYLTYPE *loc)
+{
+ if (state->language_version < 130) {
+ _mesa_glsl_error(loc, state, "bit operations require GLSL 1.30");
+ return glsl_type::error_type;
+ }
+
+ /* From page 50 (page 56 of the PDF) of the GLSL 1.30 spec:
+ *
+ * "The shift operators (<<) and (>>). For both operators, the operands
+ * must be signed or unsigned integers or integer vectors. One operand
+ * can be signed while the other is unsigned."
+ */
+ if (!type_a->is_integer()) {
+ _mesa_glsl_error(loc, state, "LHS of operator %s must be an integer or "
+ "integer vector", ast_expression::operator_string(op));
+ return glsl_type::error_type;
+
+ }
+ if (!type_b->is_integer()) {
+ _mesa_glsl_error(loc, state, "RHS of operator %s must be an integer or "
+ "integer vector", ast_expression::operator_string(op));
+ return glsl_type::error_type;
+ }
+
+ /* "If the first operand is a scalar, the second operand has to be
+ * a scalar as well."
+ */
+ if (type_a->is_scalar() && !type_b->is_scalar()) {
+ _mesa_glsl_error(loc, state, "If the first operand of %s is scalar, the "
+ "second must be scalar as well",
+ ast_expression::operator_string(op));
+ return glsl_type::error_type;
+ }
+
+ /* If both operands are vectors, check that they have same number of
+ * elements.
+ */
+ if (type_a->is_vector() &&
+ type_b->is_vector() &&
+ type_a->vector_elements != type_b->vector_elements) {
+ _mesa_glsl_error(loc, state, "Vector operands to operator %s must "
+ "have same number of elements",
+ ast_expression::operator_string(op));
+ return glsl_type::error_type;
+ }
+
+ /* "In all cases, the resulting type will be the same type as the left
+ * operand."
+ */
+ return type_a;
+}
+
+/**
+ * Validates that a value can be assigned to a location with a specified type
+ *
+ * Validates that \c rhs can be assigned to some location. If the types are
+ * not an exact match but an automatic conversion is possible, \c rhs will be
+ * converted.
+ *
+ * \return
+ * \c NULL if \c rhs cannot be assigned to a location with type \c lhs_type.
+ * Otherwise the actual RHS to be assigned will be returned. This may be
+ * \c rhs, or it may be \c rhs after some type conversion.
+ *
+ * \note
+ * In addition to being used for assignments, this function is used to
+ * type-check return values.
+ */
+ir_rvalue *
+validate_assignment(struct _mesa_glsl_parse_state *state,
+ const glsl_type *lhs_type, ir_rvalue *rhs)
+{
+ /* If there is already some error in the RHS, just return it. Anything
+ * else will lead to an avalanche of error message back to the user.
+ */
+ if (rhs->type->is_error())
+ return rhs;
+
+ /* If the types are identical, the assignment can trivially proceed.
+ */
+ if (rhs->type == lhs_type)
+ return rhs;
+
+ /* If the array element types are the same and the size of the LHS is zero,
+ * the assignment is okay.
+ *
+ * Note: Whole-array assignments are not permitted in GLSL 1.10, but this
+ * is handled by ir_dereference::is_lvalue.
+ */
+ if (lhs_type->is_array() && rhs->type->is_array()
+ && (lhs_type->element_type() == rhs->type->element_type())
+ && (lhs_type->array_size() == 0)) {
+ return rhs;
+ }
+
+ /* Check for implicit conversion in GLSL 1.20 */
+ if (apply_implicit_conversion(lhs_type, rhs, state)) {
+ if (rhs->type == lhs_type)
+ return rhs;
+ }
+
+ return NULL;
+}
+
+ir_rvalue *
+do_assignment(exec_list *instructions, struct _mesa_glsl_parse_state *state,
+ ir_rvalue *lhs, ir_rvalue *rhs,
+ YYLTYPE lhs_loc)
+{
+ void *ctx = state;
+ bool error_emitted = (lhs->type->is_error() || rhs->type->is_error());
+
+ if (!error_emitted) {
+ if (lhs->variable_referenced() != NULL
+ && lhs->variable_referenced()->read_only) {
+ _mesa_glsl_error(&lhs_loc, state,
+ "assignment to read-only variable '%s'",
+ lhs->variable_referenced()->name);
+ error_emitted = true;
+
+ } else if (!lhs->is_lvalue()) {
+ _mesa_glsl_error(& lhs_loc, state, "non-lvalue in assignment");
+ error_emitted = true;
+ }
+
+ if (state->es_shader && lhs->type->is_array()) {
+ _mesa_glsl_error(&lhs_loc, state, "whole array assignment is not "
+ "allowed in GLSL ES 1.00.");
+ error_emitted = true;
+ }
+ }
+
+ ir_rvalue *new_rhs = validate_assignment(state, lhs->type, rhs);
+ if (new_rhs == NULL) {
+ _mesa_glsl_error(& lhs_loc, state, "type mismatch");
+ } else {
+ rhs = new_rhs;
+
+ /* If the LHS array was not declared with a size, it takes it size from
+ * the RHS. If the LHS is an l-value and a whole array, it must be a
+ * dereference of a variable. Any other case would require that the LHS
+ * is either not an l-value or not a whole array.
+ */
+ if (lhs->type->array_size() == 0) {
+ ir_dereference *const d = lhs->as_dereference();
+
+ assert(d != NULL);
+
+ ir_variable *const var = d->variable_referenced();
+
+ assert(var != NULL);
+
+ if (var->max_array_access >= unsigned(rhs->type->array_size())) {
+ /* FINISHME: This should actually log the location of the RHS. */
+ _mesa_glsl_error(& lhs_loc, state, "array size must be > %u due to "
+ "previous access",
+ var->max_array_access);
+ }
+
+ var->type = glsl_type::get_array_instance(lhs->type->element_type(),
+ rhs->type->array_size());
+ d->type = var->type;
+ }
+ }
+
+ /* Most callers of do_assignment (assign, add_assign, pre_inc/dec,
+ * but not post_inc) need the converted assigned value as an rvalue
+ * to handle things like:
+ *
+ * i = j += 1;
+ *
+ * So we always just store the computed value being assigned to a
+ * temporary and return a deref of that temporary. If the rvalue
+ * ends up not being used, the temp will get copy-propagated out.
+ */
+ ir_variable *var = new(ctx) ir_variable(rhs->type, "assignment_tmp",
+ ir_var_temporary);
+ ir_dereference_variable *deref_var = new(ctx) ir_dereference_variable(var);
+ instructions->push_tail(var);
+ instructions->push_tail(new(ctx) ir_assignment(deref_var,
+ rhs,
+ NULL));
+ deref_var = new(ctx) ir_dereference_variable(var);
+
+ if (!error_emitted)
+ instructions->push_tail(new(ctx) ir_assignment(lhs, deref_var, NULL));
+
+ return new(ctx) ir_dereference_variable(var);
+}
+
+static ir_rvalue *
+get_lvalue_copy(exec_list *instructions, ir_rvalue *lvalue)
+{
+ void *ctx = ralloc_parent(lvalue);
+ ir_variable *var;
+
+ var = new(ctx) ir_variable(lvalue->type, "_post_incdec_tmp",
+ ir_var_temporary);
+ instructions->push_tail(var);
+ var->mode = ir_var_auto;
+
+ instructions->push_tail(new(ctx) ir_assignment(new(ctx) ir_dereference_variable(var),
+ lvalue, NULL));
+
+ /* Once we've created this temporary, mark it read only so it's no
+ * longer considered an lvalue.
+ */
+ var->read_only = true;
+
+ return new(ctx) ir_dereference_variable(var);
+}
+
+
+ir_rvalue *
+ast_node::hir(exec_list *instructions,
+ struct _mesa_glsl_parse_state *state)
+{
+ (void) instructions;
+ (void) state;
+
+ return NULL;
+}
+
+static void
+mark_whole_array_access(ir_rvalue *access)
+{
+ ir_dereference_variable *deref = access->as_dereference_variable();
+
+ if (deref) {
+ deref->var->max_array_access = deref->type->length - 1;
+ }
+}
+
+static ir_rvalue *
+do_comparison(void *mem_ctx, int operation, ir_rvalue *op0, ir_rvalue *op1)
+{
+ int join_op;
+ ir_rvalue *cmp = NULL;
+
+ if (operation == ir_binop_all_equal)
+ join_op = ir_binop_logic_and;
+ else
+ join_op = ir_binop_logic_or;
+
+ switch (op0->type->base_type) {
+ case GLSL_TYPE_FLOAT:
+ case GLSL_TYPE_UINT:
+ case GLSL_TYPE_INT:
+ case GLSL_TYPE_BOOL:
+ return new(mem_ctx) ir_expression(operation, op0, op1);
+
+ case GLSL_TYPE_ARRAY: {
+ for (unsigned int i = 0; i < op0->type->length; i++) {
+ ir_rvalue *e0, *e1, *result;
+
+ e0 = new(mem_ctx) ir_dereference_array(op0->clone(mem_ctx, NULL),
+ new(mem_ctx) ir_constant(i));
+ e1 = new(mem_ctx) ir_dereference_array(op1->clone(mem_ctx, NULL),
+ new(mem_ctx) ir_constant(i));
+ result = do_comparison(mem_ctx, operation, e0, e1);
+
+ if (cmp) {
+ cmp = new(mem_ctx) ir_expression(join_op, cmp, result);
+ } else {
+ cmp = result;
+ }
+ }
+
+ mark_whole_array_access(op0);
+ mark_whole_array_access(op1);
+ break;
+ }
+
+ case GLSL_TYPE_STRUCT: {
+ for (unsigned int i = 0; i < op0->type->length; i++) {
+ ir_rvalue *e0, *e1, *result;
+ const char *field_name = op0->type->fields.structure[i].name;
+
+ e0 = new(mem_ctx) ir_dereference_record(op0->clone(mem_ctx, NULL),
+ field_name);
+ e1 = new(mem_ctx) ir_dereference_record(op1->clone(mem_ctx, NULL),
+ field_name);
+ result = do_comparison(mem_ctx, operation, e0, e1);
+
+ if (cmp) {
+ cmp = new(mem_ctx) ir_expression(join_op, cmp, result);
+ } else {
+ cmp = result;
+ }
+ }
+ break;
+ }
+
+ case GLSL_TYPE_ERROR:
+ case GLSL_TYPE_VOID:
+ case GLSL_TYPE_SAMPLER:
+ /* I assume a comparison of a struct containing a sampler just
+ * ignores the sampler present in the type.
+ */
+ break;
+
+ default:
+ assert(!"Should not get here.");
+ break;
+ }
+
+ if (cmp == NULL)
+ cmp = new(mem_ctx) ir_constant(true);
+
+ return cmp;
+}
+
+ir_rvalue *
+ast_expression::hir(exec_list *instructions,
+ struct _mesa_glsl_parse_state *state)
+{
+ void *ctx = state;
+ static const int operations[AST_NUM_OPERATORS] = {
+ -1, /* ast_assign doesn't convert to ir_expression. */
+ -1, /* ast_plus doesn't convert to ir_expression. */
+ ir_unop_neg,
+ ir_binop_add,
+ ir_binop_sub,
+ ir_binop_mul,
+ ir_binop_div,
+ ir_binop_mod,
+ ir_binop_lshift,
+ ir_binop_rshift,
+ ir_binop_less,
+ ir_binop_greater,
+ ir_binop_lequal,
+ ir_binop_gequal,
+ ir_binop_all_equal,
+ ir_binop_any_nequal,
+ ir_binop_bit_and,
+ ir_binop_bit_xor,
+ ir_binop_bit_or,
+ ir_unop_bit_not,
+ ir_binop_logic_and,
+ ir_binop_logic_xor,
+ ir_binop_logic_or,
+ ir_unop_logic_not,
+
+ /* Note: The following block of expression types actually convert
+ * to multiple IR instructions.
+ */
+ ir_binop_mul, /* ast_mul_assign */
+ ir_binop_div, /* ast_div_assign */
+ ir_binop_mod, /* ast_mod_assign */
+ ir_binop_add, /* ast_add_assign */
+ ir_binop_sub, /* ast_sub_assign */
+ ir_binop_lshift, /* ast_ls_assign */
+ ir_binop_rshift, /* ast_rs_assign */
+ ir_binop_bit_and, /* ast_and_assign */
+ ir_binop_bit_xor, /* ast_xor_assign */
+ ir_binop_bit_or, /* ast_or_assign */
+
+ -1, /* ast_conditional doesn't convert to ir_expression. */
+ ir_binop_add, /* ast_pre_inc. */
+ ir_binop_sub, /* ast_pre_dec. */
+ ir_binop_add, /* ast_post_inc. */
+ ir_binop_sub, /* ast_post_dec. */
+ -1, /* ast_field_selection doesn't conv to ir_expression. */
+ -1, /* ast_array_index doesn't convert to ir_expression. */
+ -1, /* ast_function_call doesn't conv to ir_expression. */
+ -1, /* ast_identifier doesn't convert to ir_expression. */
+ -1, /* ast_int_constant doesn't convert to ir_expression. */
+ -1, /* ast_uint_constant doesn't conv to ir_expression. */
+ -1, /* ast_float_constant doesn't conv to ir_expression. */
+ -1, /* ast_bool_constant doesn't conv to ir_expression. */
+ -1, /* ast_sequence doesn't convert to ir_expression. */
+ };
+ ir_rvalue *result = NULL;
+ ir_rvalue *op[3];
+ const struct glsl_type *type = glsl_type::error_type;
+ bool error_emitted = false;
+ YYLTYPE loc;
+
+ loc = this->get_location();
+
+ switch (this->oper) {
+ case ast_assign: {
+ op[0] = this->subexpressions[0]->hir(instructions, state);
+ op[1] = this->subexpressions[1]->hir(instructions, state);
+
+ result = do_assignment(instructions, state, op[0], op[1],
+ this->subexpressions[0]->get_location());
+ error_emitted = result->type->is_error();
+ type = result->type;
+ break;
+ }
+
+ case ast_plus:
+ op[0] = this->subexpressions[0]->hir(instructions, state);
+
+ type = unary_arithmetic_result_type(op[0]->type, state, & loc);
+
+ error_emitted = type->is_error();
+
+ result = op[0];
+ break;
+
+ case ast_neg:
+ op[0] = this->subexpressions[0]->hir(instructions, state);
+
+ type = unary_arithmetic_result_type(op[0]->type, state, & loc);
+
+ error_emitted = type->is_error();
+
+ result = new(ctx) ir_expression(operations[this->oper], type,
+ op[0], NULL);
+ break;
+
+ case ast_add:
+ case ast_sub:
+ case ast_mul:
+ case ast_div:
+ op[0] = this->subexpressions[0]->hir(instructions, state);
+ op[1] = this->subexpressions[1]->hir(instructions, state);
+
+ type = arithmetic_result_type(op[0], op[1],
+ (this->oper == ast_mul),
+ state, & loc);
+ error_emitted = type->is_error();
+
+ result = new(ctx) ir_expression(operations[this->oper], type,
+ op[0], op[1]);
+ break;
+
+ case ast_mod:
+ op[0] = this->subexpressions[0]->hir(instructions, state);
+ op[1] = this->subexpressions[1]->hir(instructions, state);
+
+ type = modulus_result_type(op[0]->type, op[1]->type, state, & loc);
+
+ assert(operations[this->oper] == ir_binop_mod);
+
+ result = new(ctx) ir_expression(operations[this->oper], type,
+ op[0], op[1]);
+ error_emitted = type->is_error();
+ break;
+
+ case ast_lshift:
+ case ast_rshift:
+ if (state->language_version < 130) {
+ _mesa_glsl_error(&loc, state, "operator %s requires GLSL 1.30",
+ operator_string(this->oper));
+ error_emitted = true;
+ }
+
+ op[0] = this->subexpressions[0]->hir(instructions, state);
+ op[1] = this->subexpressions[1]->hir(instructions, state);
+ type = shift_result_type(op[0]->type, op[1]->type, this->oper, state,
+ &loc);
+ result = new(ctx) ir_expression(operations[this->oper], type,
+ op[0], op[1]);
+ error_emitted = op[0]->type->is_error() || op[1]->type->is_error();
+ break;
+
+ case ast_less:
+ case ast_greater:
+ case ast_lequal:
+ case ast_gequal:
+ op[0] = this->subexpressions[0]->hir(instructions, state);
+ op[1] = this->subexpressions[1]->hir(instructions, state);
+
+ type = relational_result_type(op[0], op[1], state, & loc);
+
+ /* The relational operators must either generate an error or result
+ * in a scalar boolean. See page 57 of the GLSL 1.50 spec.
+ */
+ assert(type->is_error()
+ || ((type->base_type == GLSL_TYPE_BOOL)
+ && type->is_scalar()));
+
+ result = new(ctx) ir_expression(operations[this->oper], type,
+ op[0], op[1]);
+ error_emitted = type->is_error();
+ break;
+
+ case ast_nequal:
+ case ast_equal:
+ op[0] = this->subexpressions[0]->hir(instructions, state);
+ op[1] = this->subexpressions[1]->hir(instructions, state);
+
+ /* From page 58 (page 64 of the PDF) of the GLSL 1.50 spec:
+ *
+ * "The equality operators equal (==), and not equal (!=)
+ * operate on all types. They result in a scalar Boolean. If
+ * the operand types do not match, then there must be a
+ * conversion from Section 4.1.10 "Implicit Conversions"
+ * applied to one operand that can make them match, in which
+ * case this conversion is done."
+ */
+ if ((!apply_implicit_conversion(op[0]->type, op[1], state)
+ && !apply_implicit_conversion(op[1]->type, op[0], state))
+ || (op[0]->type != op[1]->type)) {
+ _mesa_glsl_error(& loc, state, "operands of `%s' must have the same "
+ "type", (this->oper == ast_equal) ? "==" : "!=");
+ error_emitted = true;
+ } else if ((state->language_version <= 110)
+ && (op[0]->type->is_array() || op[1]->type->is_array())) {
+ _mesa_glsl_error(& loc, state, "array comparisons forbidden in "
+ "GLSL 1.10");
+ error_emitted = true;
+ }
+
+ result = do_comparison(ctx, operations[this->oper], op[0], op[1]);
+ type = glsl_type::bool_type;
+
+ assert(error_emitted || (result->type == glsl_type::bool_type));
+ break;
+
+ case ast_bit_and:
+ case ast_bit_xor:
+ case ast_bit_or:
+ op[0] = this->subexpressions[0]->hir(instructions, state);
+ op[1] = this->subexpressions[1]->hir(instructions, state);
+ type = bit_logic_result_type(op[0]->type, op[1]->type, this->oper,
+ state, &loc);
+ result = new(ctx) ir_expression(operations[this->oper], type,
+ op[0], op[1]);
+ error_emitted = op[0]->type->is_error() || op[1]->type->is_error();
+ break;
+
+ case ast_bit_not:
+ op[0] = this->subexpressions[0]->hir(instructions, state);
+
+ if (state->language_version < 130) {
+ _mesa_glsl_error(&loc, state, "bit-wise operations require GLSL 1.30");
+ error_emitted = true;
+ }
+
+ if (!op[0]->type->is_integer()) {
+ _mesa_glsl_error(&loc, state, "operand of `~' must be an integer");
+ error_emitted = true;
+ }
+
+ type = op[0]->type;
+ result = new(ctx) ir_expression(ir_unop_bit_not, type, op[0], NULL);
+ break;
+
+ case ast_logic_and: {
+ op[0] = this->subexpressions[0]->hir(instructions, state);
+
+ if (!op[0]->type->is_boolean() || !op[0]->type->is_scalar()) {
+ YYLTYPE loc = this->subexpressions[0]->get_location();
+
+ _mesa_glsl_error(& loc, state, "LHS of `%s' must be scalar boolean",
+ operator_string(this->oper));
+ error_emitted = true;
+ }
+
+ ir_constant *op0_const = op[0]->constant_expression_value();
+ if (op0_const) {
+ if (op0_const->value.b[0]) {
+ op[1] = this->subexpressions[1]->hir(instructions, state);
+
+ if (!op[1]->type->is_boolean() || !op[1]->type->is_scalar()) {
+ YYLTYPE loc = this->subexpressions[1]->get_location();
+
+ _mesa_glsl_error(& loc, state,
+ "RHS of `%s' must be scalar boolean",
+ operator_string(this->oper));
+ error_emitted = true;
+ }
+ result = op[1];
+ } else {
+ result = op0_const;
+ }
+ type = glsl_type::bool_type;
+ } else {
+ ir_variable *const tmp = new(ctx) ir_variable(glsl_type::bool_type,
+ "and_tmp",
+ ir_var_temporary);
+ instructions->push_tail(tmp);
+
+ ir_if *const stmt = new(ctx) ir_if(op[0]);
+ instructions->push_tail(stmt);
+
+ op[1] = this->subexpressions[1]->hir(&stmt->then_instructions, state);
+
+ if (!op[1]->type->is_boolean() || !op[1]->type->is_scalar()) {
+ YYLTYPE loc = this->subexpressions[1]->get_location();
+
+ _mesa_glsl_error(& loc, state,
+ "RHS of `%s' must be scalar boolean",
+ operator_string(this->oper));
+ error_emitted = true;
+ }
+
+ ir_dereference *const then_deref = new(ctx) ir_dereference_variable(tmp);
+ ir_assignment *const then_assign =
+ new(ctx) ir_assignment(then_deref, op[1], NULL);
+ stmt->then_instructions.push_tail(then_assign);
+
+ ir_dereference *const else_deref = new(ctx) ir_dereference_variable(tmp);
+ ir_assignment *const else_assign =
+ new(ctx) ir_assignment(else_deref, new(ctx) ir_constant(false), NULL);
+ stmt->else_instructions.push_tail(else_assign);
+
+ result = new(ctx) ir_dereference_variable(tmp);
+ type = tmp->type;
+ }
+ break;
+ }
+
+ case ast_logic_or: {
+ op[0] = this->subexpressions[0]->hir(instructions, state);
+
+ if (!op[0]->type->is_boolean() || !op[0]->type->is_scalar()) {
+ YYLTYPE loc = this->subexpressions[0]->get_location();
+
+ _mesa_glsl_error(& loc, state, "LHS of `%s' must be scalar boolean",
+ operator_string(this->oper));
+ error_emitted = true;
+ }
+
+ ir_constant *op0_const = op[0]->constant_expression_value();
+ if (op0_const) {
+ if (op0_const->value.b[0]) {
+ result = op0_const;
+ } else {
+ op[1] = this->subexpressions[1]->hir(instructions, state);
+
+ if (!op[1]->type->is_boolean() || !op[1]->type->is_scalar()) {
+ YYLTYPE loc = this->subexpressions[1]->get_location();
+
+ _mesa_glsl_error(& loc, state,
+ "RHS of `%s' must be scalar boolean",
+ operator_string(this->oper));
+ error_emitted = true;
+ }
+ result = op[1];
+ }
+ type = glsl_type::bool_type;
+ } else {
+ ir_variable *const tmp = new(ctx) ir_variable(glsl_type::bool_type,
+ "or_tmp",
+ ir_var_temporary);
+ instructions->push_tail(tmp);
+
+ ir_if *const stmt = new(ctx) ir_if(op[0]);
+ instructions->push_tail(stmt);
+
+ op[1] = this->subexpressions[1]->hir(&stmt->else_instructions, state);
+
+ if (!op[1]->type->is_boolean() || !op[1]->type->is_scalar()) {
+ YYLTYPE loc = this->subexpressions[1]->get_location();
+
+ _mesa_glsl_error(& loc, state, "RHS of `%s' must be scalar boolean",
+ operator_string(this->oper));
+ error_emitted = true;
+ }
+
+ ir_dereference *const then_deref = new(ctx) ir_dereference_variable(tmp);
+ ir_assignment *const then_assign =
+ new(ctx) ir_assignment(then_deref, new(ctx) ir_constant(true), NULL);
+ stmt->then_instructions.push_tail(then_assign);
+
+ ir_dereference *const else_deref = new(ctx) ir_dereference_variable(tmp);
+ ir_assignment *const else_assign =
+ new(ctx) ir_assignment(else_deref, op[1], NULL);
+ stmt->else_instructions.push_tail(else_assign);
+
+ result = new(ctx) ir_dereference_variable(tmp);
+ type = tmp->type;
+ }
+ break;
+ }
+
+ case ast_logic_xor:
+ op[0] = this->subexpressions[0]->hir(instructions, state);
+ op[1] = this->subexpressions[1]->hir(instructions, state);
+
+
+ result = new(ctx) ir_expression(operations[this->oper], glsl_type::bool_type,
+ op[0], op[1]);
+ type = glsl_type::bool_type;
+ break;
+
+ case ast_logic_not:
+ op[0] = this->subexpressions[0]->hir(instructions, state);
+
+ if (!op[0]->type->is_boolean() || !op[0]->type->is_scalar()) {
+ YYLTYPE loc = this->subexpressions[0]->get_location();
+
+ _mesa_glsl_error(& loc, state,
+ "operand of `!' must be scalar boolean");
+ error_emitted = true;
+ }
+
+ result = new(ctx) ir_expression(operations[this->oper], glsl_type::bool_type,
+ op[0], NULL);
+ type = glsl_type::bool_type;
+ break;
+
+ case ast_mul_assign:
+ case ast_div_assign:
+ case ast_add_assign:
+ case ast_sub_assign: {
+ op[0] = this->subexpressions[0]->hir(instructions, state);
+ op[1] = this->subexpressions[1]->hir(instructions, state);
+
+ type = arithmetic_result_type(op[0], op[1],
+ (this->oper == ast_mul_assign),
+ state, & loc);
+
+ ir_rvalue *temp_rhs = new(ctx) ir_expression(operations[this->oper], type,
+ op[0], op[1]);
+
+ result = do_assignment(instructions, state,
+ op[0]->clone(ctx, NULL), temp_rhs,
+ this->subexpressions[0]->get_location());
+ type = result->type;
+ error_emitted = (op[0]->type->is_error());
+
+ /* GLSL 1.10 does not allow array assignment. However, we don't have to
+ * explicitly test for this because none of the binary expression
+ * operators allow array operands either.
+ */
+
+ break;
+ }
+
+ case ast_mod_assign: {
+ op[0] = this->subexpressions[0]->hir(instructions, state);
+ op[1] = this->subexpressions[1]->hir(instructions, state);
+
+ type = modulus_result_type(op[0]->type, op[1]->type, state, & loc);
+
+ assert(operations[this->oper] == ir_binop_mod);
+
+ ir_rvalue *temp_rhs;
+ temp_rhs = new(ctx) ir_expression(operations[this->oper], type,
+ op[0], op[1]);
+
+ result = do_assignment(instructions, state,
+ op[0]->clone(ctx, NULL), temp_rhs,
+ this->subexpressions[0]->get_location());
+ type = result->type;
+ error_emitted = type->is_error();
+ break;
+ }
+
+ case ast_ls_assign:
+ case ast_rs_assign: {
+ op[0] = this->subexpressions[0]->hir(instructions, state);
+ op[1] = this->subexpressions[1]->hir(instructions, state);
+ type = shift_result_type(op[0]->type, op[1]->type, this->oper, state,
+ &loc);
+ ir_rvalue *temp_rhs = new(ctx) ir_expression(operations[this->oper],
+ type, op[0], op[1]);
+ result = do_assignment(instructions, state, op[0]->clone(ctx, NULL),
+ temp_rhs,
+ this->subexpressions[0]->get_location());
+ error_emitted = op[0]->type->is_error() || op[1]->type->is_error();
+ break;
+ }
+
+ case ast_and_assign:
+ case ast_xor_assign:
+ case ast_or_assign: {
+ op[0] = this->subexpressions[0]->hir(instructions, state);
+ op[1] = this->subexpressions[1]->hir(instructions, state);
+ type = bit_logic_result_type(op[0]->type, op[1]->type, this->oper,
+ state, &loc);
+ ir_rvalue *temp_rhs = new(ctx) ir_expression(operations[this->oper],
+ type, op[0], op[1]);
+ result = do_assignment(instructions, state, op[0]->clone(ctx, NULL),
+ temp_rhs,
+ this->subexpressions[0]->get_location());
+ error_emitted = op[0]->type->is_error() || op[1]->type->is_error();
+ break;
+ }
+
+ case ast_conditional: {
+ op[0] = this->subexpressions[0]->hir(instructions, state);
+
+ /* From page 59 (page 65 of the PDF) of the GLSL 1.50 spec:
+ *
+ * "The ternary selection operator (?:). It operates on three
+ * expressions (exp1 ? exp2 : exp3). This operator evaluates the
+ * first expression, which must result in a scalar Boolean."
+ */
+ if (!op[0]->type->is_boolean() || !op[0]->type->is_scalar()) {
+ YYLTYPE loc = this->subexpressions[0]->get_location();
+
+ _mesa_glsl_error(& loc, state, "?: condition must be scalar boolean");
+ error_emitted = true;
+ }
+
+ /* The :? operator is implemented by generating an anonymous temporary
+ * followed by an if-statement. The last instruction in each branch of
+ * the if-statement assigns a value to the anonymous temporary. This
+ * temporary is the r-value of the expression.
+ */
+ exec_list then_instructions;
+ exec_list else_instructions;
+
+ op[1] = this->subexpressions[1]->hir(&then_instructions, state);
+ op[2] = this->subexpressions[2]->hir(&else_instructions, state);
+
+ /* From page 59 (page 65 of the PDF) of the GLSL 1.50 spec:
+ *
+ * "The second and third expressions can be any type, as
+ * long their types match, or there is a conversion in
+ * Section 4.1.10 "Implicit Conversions" that can be applied
+ * to one of the expressions to make their types match. This
+ * resulting matching type is the type of the entire
+ * expression."
+ */
+ if ((!apply_implicit_conversion(op[1]->type, op[2], state)
+ && !apply_implicit_conversion(op[2]->type, op[1], state))
+ || (op[1]->type != op[2]->type)) {
+ YYLTYPE loc = this->subexpressions[1]->get_location();
+
+ _mesa_glsl_error(& loc, state, "Second and third operands of ?: "
+ "operator must have matching types.");
+ error_emitted = true;
+ type = glsl_type::error_type;
+ } else {
+ type = op[1]->type;
+ }
+
+ /* From page 33 (page 39 of the PDF) of the GLSL 1.10 spec:
+ *
+ * "The second and third expressions must be the same type, but can
+ * be of any type other than an array."
+ */
+ if ((state->language_version <= 110) && type->is_array()) {
+ _mesa_glsl_error(& loc, state, "Second and third operands of ?: "
+ "operator must not be arrays.");
+ error_emitted = true;
+ }
+
+ ir_constant *cond_val = op[0]->constant_expression_value();
+ ir_constant *then_val = op[1]->constant_expression_value();
+ ir_constant *else_val = op[2]->constant_expression_value();
+
+ if (then_instructions.is_empty()
+ && else_instructions.is_empty()
+ && (cond_val != NULL) && (then_val != NULL) && (else_val != NULL)) {
+ result = (cond_val->value.b[0]) ? then_val : else_val;
+ } else {
+ ir_variable *const tmp =
+ new(ctx) ir_variable(type, "conditional_tmp", ir_var_temporary);
+ instructions->push_tail(tmp);
+
+ ir_if *const stmt = new(ctx) ir_if(op[0]);
+ instructions->push_tail(stmt);
+
+ then_instructions.move_nodes_to(& stmt->then_instructions);
+ ir_dereference *const then_deref =
+ new(ctx) ir_dereference_variable(tmp);
+ ir_assignment *const then_assign =
+ new(ctx) ir_assignment(then_deref, op[1], NULL);
+ stmt->then_instructions.push_tail(then_assign);
+
+ else_instructions.move_nodes_to(& stmt->else_instructions);
+ ir_dereference *const else_deref =
+ new(ctx) ir_dereference_variable(tmp);
+ ir_assignment *const else_assign =
+ new(ctx) ir_assignment(else_deref, op[2], NULL);
+ stmt->else_instructions.push_tail(else_assign);
+
+ result = new(ctx) ir_dereference_variable(tmp);
+ }
+ break;
+ }
+
+ case ast_pre_inc:
+ case ast_pre_dec: {
+ op[0] = this->subexpressions[0]->hir(instructions, state);
+ if (op[0]->type->base_type == GLSL_TYPE_FLOAT)
+ op[1] = new(ctx) ir_constant(1.0f);
+ else
+ op[1] = new(ctx) ir_constant(1);
+
+ type = arithmetic_result_type(op[0], op[1], false, state, & loc);
+
+ ir_rvalue *temp_rhs;
+ temp_rhs = new(ctx) ir_expression(operations[this->oper], type,
+ op[0], op[1]);
+
+ result = do_assignment(instructions, state,
+ op[0]->clone(ctx, NULL), temp_rhs,
+ this->subexpressions[0]->get_location());
+ type = result->type;
+ error_emitted = op[0]->type->is_error();
+ break;
+ }
+
+ case ast_post_inc:
+ case ast_post_dec: {
+ op[0] = this->subexpressions[0]->hir(instructions, state);
+ if (op[0]->type->base_type == GLSL_TYPE_FLOAT)
+ op[1] = new(ctx) ir_constant(1.0f);
+ else
+ op[1] = new(ctx) ir_constant(1);
+
+ error_emitted = op[0]->type->is_error() || op[1]->type->is_error();
+
+ type = arithmetic_result_type(op[0], op[1], false, state, & loc);
+
+ ir_rvalue *temp_rhs;
+ temp_rhs = new(ctx) ir_expression(operations[this->oper], type,
+ op[0], op[1]);
+
+ /* Get a temporary of a copy of the lvalue before it's modified.
+ * This may get thrown away later.
+ */
+ result = get_lvalue_copy(instructions, op[0]->clone(ctx, NULL));
+
+ (void)do_assignment(instructions, state,
+ op[0]->clone(ctx, NULL), temp_rhs,
+ this->subexpressions[0]->get_location());
+
+ type = result->type;
+ error_emitted = op[0]->type->is_error();
+ break;
+ }
+
+ case ast_field_selection:
+ result = _mesa_ast_field_selection_to_hir(this, instructions, state);
+ type = result->type;
+ break;
+
+ case ast_array_index: {
+ YYLTYPE index_loc = subexpressions[1]->get_location();
+
+ op[0] = subexpressions[0]->hir(instructions, state);
+ op[1] = subexpressions[1]->hir(instructions, state);
+
+ error_emitted = op[0]->type->is_error() || op[1]->type->is_error();
+
+ ir_rvalue *const array = op[0];
+
+ result = new(ctx) ir_dereference_array(op[0], op[1]);
+
+ /* Do not use op[0] after this point. Use array.
+ */
+ op[0] = NULL;
+
+
+ if (error_emitted)
+ break;
+
+ if (!array->type->is_array()
+ && !array->type->is_matrix()
+ && !array->type->is_vector()) {
+ _mesa_glsl_error(& index_loc, state,
+ "cannot dereference non-array / non-matrix / "
+ "non-vector");
+ error_emitted = true;
+ }
+
+ if (!op[1]->type->is_integer()) {
+ _mesa_glsl_error(& index_loc, state,
+ "array index must be integer type");
+ error_emitted = true;
+ } else if (!op[1]->type->is_scalar()) {
+ _mesa_glsl_error(& index_loc, state,
+ "array index must be scalar");
+ error_emitted = true;
+ }
+
+ /* If the array index is a constant expression and the array has a
+ * declared size, ensure that the access is in-bounds. If the array
+ * index is not a constant expression, ensure that the array has a
+ * declared size.
+ */
+ ir_constant *const const_index = op[1]->constant_expression_value();
+ if (const_index != NULL) {
+ const int idx = const_index->value.i[0];
+ const char *type_name;
+ unsigned bound = 0;
+
+ if (array->type->is_matrix()) {
+ type_name = "matrix";
+ } else if (array->type->is_vector()) {
+ type_name = "vector";
+ } else {
+ type_name = "array";
+ }
+
+ /* From page 24 (page 30 of the PDF) of the GLSL 1.50 spec:
+ *
+ * "It is illegal to declare an array with a size, and then
+ * later (in the same shader) index the same array with an
+ * integral constant expression greater than or equal to the
+ * declared size. It is also illegal to index an array with a
+ * negative constant expression."
+ */
+ if (array->type->is_matrix()) {
+ if (array->type->row_type()->vector_elements <= idx) {
+ bound = array->type->row_type()->vector_elements;
+ }
+ } else if (array->type->is_vector()) {
+ if (array->type->vector_elements <= idx) {
+ bound = array->type->vector_elements;
+ }
+ } else {
+ if ((array->type->array_size() > 0)
+ && (array->type->array_size() <= idx)) {
+ bound = array->type->array_size();
+ }
+ }
+
+ if (bound > 0) {
+ _mesa_glsl_error(& loc, state, "%s index must be < %u",
+ type_name, bound);
+ error_emitted = true;
+ } else if (idx < 0) {
+ _mesa_glsl_error(& loc, state, "%s index must be >= 0",
+ type_name);
+ error_emitted = true;
+ }
+
+ if (array->type->is_array()) {
+ /* If the array is a variable dereference, it dereferences the
+ * whole array, by definition. Use this to get the variable.
+ *
+ * FINISHME: Should some methods for getting / setting / testing
+ * FINISHME: array access limits be added to ir_dereference?
+ */
+ ir_variable *const v = array->whole_variable_referenced();
+ if ((v != NULL) && (unsigned(idx) > v->max_array_access))
+ v->max_array_access = idx;
+ }
+ } else if (array->type->array_size() == 0) {
+ _mesa_glsl_error(&loc, state, "unsized array index must be constant");
+ } else {
+ if (array->type->is_array()) {
+ /* whole_variable_referenced can return NULL if the array is a
+ * member of a structure. In this case it is safe to not update
+ * the max_array_access field because it is never used for fields
+ * of structures.
+ */
+ ir_variable *v = array->whole_variable_referenced();
+ if (v != NULL)
+ v->max_array_access = array->type->array_size();
+ }
+ }
+
+ /* From page 23 (29 of the PDF) of the GLSL 1.30 spec:
+ *
+ * "Samplers aggregated into arrays within a shader (using square
+ * brackets [ ]) can only be indexed with integral constant
+ * expressions [...]."
+ *
+ * This restriction was added in GLSL 1.30. Shaders using earlier version
+ * of the language should not be rejected by the compiler front-end for
+ * using this construct. This allows useful things such as using a loop
+ * counter as the index to an array of samplers. If the loop in unrolled,
+ * the code should compile correctly. Instead, emit a warning.
+ */
+ if (array->type->is_array() &&
+ array->type->element_type()->is_sampler() &&
+ const_index == NULL) {
+
+ if (state->language_version == 100) {
+ _mesa_glsl_warning(&loc, state,
+ "sampler arrays indexed with non-constant "
+ "expressions is optional in GLSL ES 1.00");
+ } else if (state->language_version < 130) {
+ _mesa_glsl_warning(&loc, state,
+ "sampler arrays indexed with non-constant "
+ "expressions is forbidden in GLSL 1.30 and "
+ "later");
+ } else {
+ _mesa_glsl_error(&loc, state,
+ "sampler arrays indexed with non-constant "
+ "expressions is forbidden in GLSL 1.30 and "
+ "later");
+ error_emitted = true;
+ }
+ }
+
+ if (error_emitted)
+ result->type = glsl_type::error_type;
+
+ type = result->type;
+ break;
+ }
+
+ case ast_function_call:
+ /* Should *NEVER* get here. ast_function_call should always be handled
+ * by ast_function_expression::hir.
+ */
+ assert(0);
+ break;
+
+ case ast_identifier: {
+ /* ast_identifier can appear several places in a full abstract syntax
+ * tree. This particular use must be at location specified in the grammar
+ * as 'variable_identifier'.
+ */
+ ir_variable *var =
+ state->symbols->get_variable(this->primary_expression.identifier);
+
+ result = new(ctx) ir_dereference_variable(var);
+
+ if (var != NULL) {
+ var->used = true;
+ type = result->type;
+ } else {
+ _mesa_glsl_error(& loc, state, "`%s' undeclared",
+ this->primary_expression.identifier);
+
+ error_emitted = true;
+ }
+ break;
+ }
+
+ case ast_int_constant:
+ type = glsl_type::int_type;
+ result = new(ctx) ir_constant(this->primary_expression.int_constant);
+ break;
+
+ case ast_uint_constant:
+ type = glsl_type::uint_type;
+ result = new(ctx) ir_constant(this->primary_expression.uint_constant);
+ break;
+
+ case ast_float_constant:
+ type = glsl_type::float_type;
+ result = new(ctx) ir_constant(this->primary_expression.float_constant);
+ break;
+
+ case ast_bool_constant:
+ type = glsl_type::bool_type;
+ result = new(ctx) ir_constant(bool(this->primary_expression.bool_constant));
+ break;
+
+ case ast_sequence: {
+ /* It should not be possible to generate a sequence in the AST without
+ * any expressions in it.
+ */
+ assert(!this->expressions.is_empty());
+
+ /* The r-value of a sequence is the last expression in the sequence. If
+ * the other expressions in the sequence do not have side-effects (and
+ * therefore add instructions to the instruction list), they get dropped
+ * on the floor.
+ */
+ foreach_list_typed (ast_node, ast, link, &this->expressions)
+ result = ast->hir(instructions, state);
+
+ type = result->type;
+
+ /* Any errors should have already been emitted in the loop above.
+ */
+ error_emitted = true;
+ break;
+ }
+ }
+
+ if (type->is_error() && !error_emitted)
+ _mesa_glsl_error(& loc, state, "type mismatch");
+
+ return result;
+}
+
+
+ir_rvalue *
+ast_expression_statement::hir(exec_list *instructions,
+ struct _mesa_glsl_parse_state *state)
+{
+ /* It is possible to have expression statements that don't have an
+ * expression. This is the solitary semicolon:
+ *
+ * for (i = 0; i < 5; i++)
+ * ;
+ *
+ * In this case the expression will be NULL. Test for NULL and don't do
+ * anything in that case.
+ */
+ if (expression != NULL)
+ expression->hir(instructions, state);
+
+ /* Statements do not have r-values.
+ */
+ return NULL;
+}
+
+
+ir_rvalue *
+ast_compound_statement::hir(exec_list *instructions,
+ struct _mesa_glsl_parse_state *state)
+{
+ if (new_scope)
+ state->symbols->push_scope();
+
+ foreach_list_typed (ast_node, ast, link, &this->statements)
+ ast->hir(instructions, state);
+
+ if (new_scope)
+ state->symbols->pop_scope();
+
+ /* Compound statements do not have r-values.
+ */
+ return NULL;
+}
+
+
+static const glsl_type *
+process_array_type(YYLTYPE *loc, const glsl_type *base, ast_node *array_size,
+ struct _mesa_glsl_parse_state *state)
+{
+ unsigned length = 0;
+
+ /* FINISHME: Reject delcarations of multidimensional arrays. */
+
+ if (array_size != NULL) {
+ exec_list dummy_instructions;
+ ir_rvalue *const ir = array_size->hir(& dummy_instructions, state);
+ YYLTYPE loc = array_size->get_location();
+
+ /* FINISHME: Verify that the grammar forbids side-effects in array
+ * FINISHME: sizes. i.e., 'vec4 [x = 12] data'
+ */
+ assert(dummy_instructions.is_empty());
+
+ if (ir != NULL) {
+ if (!ir->type->is_integer()) {
+ _mesa_glsl_error(& loc, state, "array size must be integer type");
+ } else if (!ir->type->is_scalar()) {
+ _mesa_glsl_error(& loc, state, "array size must be scalar type");
+ } else {
+ ir_constant *const size = ir->constant_expression_value();
+
+ if (size == NULL) {
+ _mesa_glsl_error(& loc, state, "array size must be a "
+ "constant valued expression");
+ } else if (size->value.i[0] <= 0) {
+ _mesa_glsl_error(& loc, state, "array size must be > 0");
+ } else {
+ assert(size->type == ir->type);
+ length = size->value.u[0];
+ }
+ }
+ }
+ } else if (state->es_shader) {
+ /* Section 10.17 of the GLSL ES 1.00 specification states that unsized
+ * array declarations have been removed from the language.
+ */
+ _mesa_glsl_error(loc, state, "unsized array declarations are not "
+ "allowed in GLSL ES 1.00.");
+ }
+
+ return glsl_type::get_array_instance(base, length);
+}
+
+
+const glsl_type *
+ast_type_specifier::glsl_type(const char **name,
+ struct _mesa_glsl_parse_state *state) const
+{
+ const struct glsl_type *type;
+
+ type = state->symbols->get_type(this->type_name);
+ *name = this->type_name;
+
+ if (this->is_array) {
+ YYLTYPE loc = this->get_location();
+ type = process_array_type(&loc, type, this->array_size, state);
+ }
+
+ return type;
+}
+
+
+static void
+apply_type_qualifier_to_variable(const struct ast_type_qualifier *qual,
+ ir_variable *var,
+ struct _mesa_glsl_parse_state *state,
+ YYLTYPE *loc)
+{
+ if (qual->flags.q.invariant) {
+ if (var->used) {
+ _mesa_glsl_error(loc, state,
+ "variable `%s' may not be redeclared "
+ "`invariant' after being used",
+ var->name);
+ } else {
+ var->invariant = 1;
+ }
+ }
+
+ if (qual->flags.q.constant || qual->flags.q.attribute
+ || qual->flags.q.uniform
+ || (qual->flags.q.varying && (state->target == fragment_shader)))
+ var->read_only = 1;
+
+ if (qual->flags.q.centroid)
+ var->centroid = 1;
+
+ if (qual->flags.q.attribute && state->target != vertex_shader) {
+ var->type = glsl_type::error_type;
+ _mesa_glsl_error(loc, state,
+ "`attribute' variables may not be declared in the "
+ "%s shader",
+ _mesa_glsl_shader_target_name(state->target));
+ }
+
+ /* From page 25 (page 31 of the PDF) of the GLSL 1.10 spec:
+ *
+ * "The varying qualifier can be used only with the data types
+ * float, vec2, vec3, vec4, mat2, mat3, and mat4, or arrays of
+ * these."
+ */
+ if (qual->flags.q.varying) {
+ const glsl_type *non_array_type;
+
+ if (var->type && var->type->is_array())
+ non_array_type = var->type->fields.array;
+ else
+ non_array_type = var->type;
+
+ if (non_array_type && non_array_type->base_type != GLSL_TYPE_FLOAT) {
+ var->type = glsl_type::error_type;
+ _mesa_glsl_error(loc, state,
+ "varying variables must be of base type float");
+ }
+ }
+
+ /* If there is no qualifier that changes the mode of the variable, leave
+ * the setting alone.
+ */
+ if (qual->flags.q.in && qual->flags.q.out)
+ var->mode = ir_var_inout;
+ else if (qual->flags.q.attribute || qual->flags.q.in
+ || (qual->flags.q.varying && (state->target == fragment_shader)))
+ var->mode = ir_var_in;
+ else if (qual->flags.q.out
+ || (qual->flags.q.varying && (state->target == vertex_shader)))
+ var->mode = ir_var_out;
+ else if (qual->flags.q.uniform)
+ var->mode = ir_var_uniform;
+
+ if (state->all_invariant && (state->current_function == NULL)) {
+ switch (state->target) {
+ case vertex_shader:
+ if (var->mode == ir_var_out)
+ var->invariant = true;
+ break;
+ case geometry_shader:
+ if ((var->mode == ir_var_in) || (var->mode == ir_var_out))
+ var->invariant = true;
+ break;
+ case fragment_shader:
+ if (var->mode == ir_var_in)
+ var->invariant = true;
+ break;
+ }
+ }
+
+ if (qual->flags.q.flat)
+ var->interpolation = ir_var_flat;
+ else if (qual->flags.q.noperspective)
+ var->interpolation = ir_var_noperspective;
+ else
+ var->interpolation = ir_var_smooth;
+
+ var->pixel_center_integer = qual->flags.q.pixel_center_integer;
+ var->origin_upper_left = qual->flags.q.origin_upper_left;
+ if ((qual->flags.q.origin_upper_left || qual->flags.q.pixel_center_integer)
+ && (strcmp(var->name, "gl_FragCoord") != 0)) {
+ const char *const qual_string = (qual->flags.q.origin_upper_left)
+ ? "origin_upper_left" : "pixel_center_integer";
+
+ _mesa_glsl_error(loc, state,
+ "layout qualifier `%s' can only be applied to "
+ "fragment shader input `gl_FragCoord'",
+ qual_string);
+ }
+
+ if (qual->flags.q.explicit_location) {
+ const bool global_scope = (state->current_function == NULL);
+ bool fail = false;
+ const char *string = "";
+
+ /* In the vertex shader only shader inputs can be given explicit
+ * locations.
+ *
+ * In the fragment shader only shader outputs can be given explicit
+ * locations.
+ */
+ switch (state->target) {
+ case vertex_shader:
+ if (!global_scope || (var->mode != ir_var_in)) {
+ fail = true;
+ string = "input";
+ }
+ break;
+
+ case geometry_shader:
+ _mesa_glsl_error(loc, state,
+ "geometry shader variables cannot be given "
+ "explicit locations\n");
+ break;
+
+ case fragment_shader:
+ if (!global_scope || (var->mode != ir_var_in)) {
+ fail = true;
+ string = "output";
+ }
+ break;
+ };
+
+ if (fail) {
+ _mesa_glsl_error(loc, state,
+ "only %s shader %s variables can be given an "
+ "explicit location\n",
+ _mesa_glsl_shader_target_name(state->target),
+ string);
+ } else {
+ var->explicit_location = true;
+
+ /* This bit of silliness is needed because invalid explicit locations
+ * are supposed to be flagged during linking. Small negative values
+ * biased by VERT_ATTRIB_GENERIC0 or FRAG_RESULT_DATA0 could alias
+ * built-in values (e.g., -16+VERT_ATTRIB_GENERIC0 = VERT_ATTRIB_POS).
+ * The linker needs to be able to differentiate these cases. This
+ * ensures that negative values stay negative.
+ */
+ if (qual->location >= 0) {
+ var->location = (state->target == vertex_shader)
+ ? (qual->location + VERT_ATTRIB_GENERIC0)
+ : (qual->location + FRAG_RESULT_DATA0);
+ } else {
+ var->location = qual->location;
+ }
+ }
+ }
+
+ /* Does the declaration use the 'layout' keyword?
+ */
+ const bool uses_layout = qual->flags.q.pixel_center_integer
+ || qual->flags.q.origin_upper_left
+ || qual->flags.q.explicit_location;
+
+ /* Does the declaration use the deprecated 'attribute' or 'varying'
+ * keywords?
+ */
+ const bool uses_deprecated_qualifier = qual->flags.q.attribute
+ || qual->flags.q.varying;
+
+ /* Is the 'layout' keyword used with parameters that allow relaxed checking.
+ * Many implementations of GL_ARB_fragment_coord_conventions_enable and some
+ * implementations (only Mesa?) GL_ARB_explicit_attrib_location_enable
+ * allowed the layout qualifier to be used with 'varying' and 'attribute'.
+ * These extensions and all following extensions that add the 'layout'
+ * keyword have been modified to require the use of 'in' or 'out'.
+ *
+ * The following extension do not allow the deprecated keywords:
+ *
+ * GL_AMD_conservative_depth
+ * GL_ARB_gpu_shader5
+ * GL_ARB_separate_shader_objects
+ * GL_ARB_tesselation_shader
+ * GL_ARB_transform_feedback3
+ * GL_ARB_uniform_buffer_object
+ *
+ * It is unknown whether GL_EXT_shader_image_load_store or GL_NV_gpu_shader5
+ * allow layout with the deprecated keywords.
+ */
+ const bool relaxed_layout_qualifier_checking =
+ state->ARB_fragment_coord_conventions_enable;
+
+ if (uses_layout && uses_deprecated_qualifier) {
+ if (relaxed_layout_qualifier_checking) {
+ _mesa_glsl_warning(loc, state,
+ "`layout' qualifier may not be used with "
+ "`attribute' or `varying'");
+ } else {
+ _mesa_glsl_error(loc, state,
+ "`layout' qualifier may not be used with "
+ "`attribute' or `varying'");
+ }
+ }
+
+ /* Layout qualifiers for gl_FragDepth, which are enabled by extension
+ * AMD_conservative_depth.
+ */
+ int depth_layout_count = qual->flags.q.depth_any
+ + qual->flags.q.depth_greater
+ + qual->flags.q.depth_less
+ + qual->flags.q.depth_unchanged;
+ if (depth_layout_count > 0
+ && !state->AMD_conservative_depth_enable) {
+ _mesa_glsl_error(loc, state,
+ "extension GL_AMD_conservative_depth must be enabled "
+ "to use depth layout qualifiers");
+ } else if (depth_layout_count > 0
+ && strcmp(var->name, "gl_FragDepth") != 0) {
+ _mesa_glsl_error(loc, state,
+ "depth layout qualifiers can be applied only to "
+ "gl_FragDepth");
+ } else if (depth_layout_count > 1
+ && strcmp(var->name, "gl_FragDepth") == 0) {
+ _mesa_glsl_error(loc, state,
+ "at most one depth layout qualifier can be applied to "
+ "gl_FragDepth");
+ }
+ if (qual->flags.q.depth_any)
+ var->depth_layout = ir_depth_layout_any;
+ else if (qual->flags.q.depth_greater)
+ var->depth_layout = ir_depth_layout_greater;
+ else if (qual->flags.q.depth_less)
+ var->depth_layout = ir_depth_layout_less;
+ else if (qual->flags.q.depth_unchanged)
+ var->depth_layout = ir_depth_layout_unchanged;
+ else
+ var->depth_layout = ir_depth_layout_none;
+
+ if (var->type->is_array() && state->language_version != 110) {
+ var->array_lvalue = true;
+ }
+}
+
+/**
+ * Get the variable that is being redeclared by this declaration
+ *
+ * Semantic checks to verify the validity of the redeclaration are also
+ * performed. If semantic checks fail, compilation error will be emitted via
+ * \c _mesa_glsl_error, but a non-\c NULL pointer will still be returned.
+ *
+ * \returns
+ * A pointer to an existing variable in the current scope if the declaration
+ * is a redeclaration, \c NULL otherwise.
+ */
+ir_variable *
+get_variable_being_redeclared(ir_variable *var, ast_declaration *decl,
+ struct _mesa_glsl_parse_state *state)
+{
+ /* Check if this declaration is actually a re-declaration, either to
+ * resize an array or add qualifiers to an existing variable.
+ *
+ * This is allowed for variables in the current scope, or when at
+ * global scope (for built-ins in the implicit outer scope).
+ */
+ ir_variable *earlier = state->symbols->get_variable(decl->identifier);
+ if (earlier == NULL ||
+ (state->current_function != NULL &&
+ !state->symbols->name_declared_this_scope(decl->identifier))) {
+ return NULL;
+ }
+
+
+ YYLTYPE loc = decl->get_location();
+
+ /* From page 24 (page 30 of the PDF) of the GLSL 1.50 spec,
+ *
+ * "It is legal to declare an array without a size and then
+ * later re-declare the same name as an array of the same
+ * type and specify a size."
+ */
+ if ((earlier->type->array_size() == 0)
+ && var->type->is_array()
+ && (var->type->element_type() == earlier->type->element_type())) {
+ /* FINISHME: This doesn't match the qualifiers on the two
+ * FINISHME: declarations. It's not 100% clear whether this is
+ * FINISHME: required or not.
+ */
+
+ /* From page 54 (page 60 of the PDF) of the GLSL 1.20 spec:
+ *
+ * "The size [of gl_TexCoord] can be at most
+ * gl_MaxTextureCoords."
+ */
+ const unsigned size = unsigned(var->type->array_size());
+ if ((strcmp("gl_TexCoord", var->name) == 0)
+ && (size > state->Const.MaxTextureCoords)) {
+ _mesa_glsl_error(& loc, state, "`gl_TexCoord' array size cannot "
+ "be larger than gl_MaxTextureCoords (%u)\n",
+ state->Const.MaxTextureCoords);
+ } else if ((size > 0) && (size <= earlier->max_array_access)) {
+ _mesa_glsl_error(& loc, state, "array size must be > %u due to "
+ "previous access",
+ earlier->max_array_access);
+ }
+
+ earlier->type = var->type;
+ delete var;
+ var = NULL;
+ } else if (state->ARB_fragment_coord_conventions_enable
+ && strcmp(var->name, "gl_FragCoord") == 0
+ && earlier->type == var->type
+ && earlier->mode == var->mode) {
+ /* Allow redeclaration of gl_FragCoord for ARB_fcc layout
+ * qualifiers.
+ */
+ earlier->origin_upper_left = var->origin_upper_left;
+ earlier->pixel_center_integer = var->pixel_center_integer;
+
+ /* According to section 4.3.7 of the GLSL 1.30 spec,
+ * the following built-in varaibles can be redeclared with an
+ * interpolation qualifier:
+ * * gl_FrontColor
+ * * gl_BackColor
+ * * gl_FrontSecondaryColor
+ * * gl_BackSecondaryColor
+ * * gl_Color
+ * * gl_SecondaryColor
+ */
+ } else if (state->language_version >= 130
+ && (strcmp(var->name, "gl_FrontColor") == 0
+ || strcmp(var->name, "gl_BackColor") == 0
+ || strcmp(var->name, "gl_FrontSecondaryColor") == 0
+ || strcmp(var->name, "gl_BackSecondaryColor") == 0
+ || strcmp(var->name, "gl_Color") == 0
+ || strcmp(var->name, "gl_SecondaryColor") == 0)
+ && earlier->type == var->type
+ && earlier->mode == var->mode) {
+ earlier->interpolation = var->interpolation;
+
+ /* Layout qualifiers for gl_FragDepth. */
+ } else if (state->AMD_conservative_depth_enable
+ && strcmp(var->name, "gl_FragDepth") == 0
+ && earlier->type == var->type
+ && earlier->mode == var->mode) {
+
+ /** From the AMD_conservative_depth spec:
+ * Within any shader, the first redeclarations of gl_FragDepth
+ * must appear before any use of gl_FragDepth.
+ */
+ if (earlier->used) {
+ _mesa_glsl_error(&loc, state,
+ "the first redeclaration of gl_FragDepth "
+ "must appear before any use of gl_FragDepth");
+ }
+
+ /* Prevent inconsistent redeclaration of depth layout qualifier. */
+ if (earlier->depth_layout != ir_depth_layout_none
+ && earlier->depth_layout != var->depth_layout) {
+ _mesa_glsl_error(&loc, state,
+ "gl_FragDepth: depth layout is declared here "
+ "as '%s, but it was previously declared as "
+ "'%s'",
+ depth_layout_string(var->depth_layout),
+ depth_layout_string(earlier->depth_layout));
+ }
+
+ earlier->depth_layout = var->depth_layout;
+
+ } else {
+ _mesa_glsl_error(&loc, state, "`%s' redeclared", decl->identifier);
+ }
+
+ return earlier;
+}
+
+/**
+ * Generate the IR for an initializer in a variable declaration
+ */
+ir_rvalue *
+process_initializer(ir_variable *var, ast_declaration *decl,
+ ast_fully_specified_type *type,
+ exec_list *initializer_instructions,
+ struct _mesa_glsl_parse_state *state)
+{
+ ir_rvalue *result = NULL;
+
+ YYLTYPE initializer_loc = decl->initializer->get_location();
+
+ /* From page 24 (page 30 of the PDF) of the GLSL 1.10 spec:
+ *
+ * "All uniform variables are read-only and are initialized either
+ * directly by an application via API commands, or indirectly by
+ * OpenGL."
+ */
+ if ((state->language_version <= 110)
+ && (var->mode == ir_var_uniform)) {
+ _mesa_glsl_error(& initializer_loc, state,
+ "cannot initialize uniforms in GLSL 1.10");
+ }
+
+ if (var->type->is_sampler()) {
+ _mesa_glsl_error(& initializer_loc, state,
+ "cannot initialize samplers");
+ }
+
+ if ((var->mode == ir_var_in) && (state->current_function == NULL)) {
+ _mesa_glsl_error(& initializer_loc, state,
+ "cannot initialize %s shader input / %s",
+ _mesa_glsl_shader_target_name(state->target),
+ (state->target == vertex_shader)
+ ? "attribute" : "varying");
+ }
+
+ ir_dereference *const lhs = new(state) ir_dereference_variable(var);
+ ir_rvalue *rhs = decl->initializer->hir(initializer_instructions,
+ state);
+
+ /* Calculate the constant value if this is a const or uniform
+ * declaration.
+ */
+ if (type->qualifier.flags.q.constant
+ || type->qualifier.flags.q.uniform) {
+ ir_rvalue *new_rhs = validate_assignment(state, var->type, rhs);
+ if (new_rhs != NULL) {
+ rhs = new_rhs;
+
+ ir_constant *constant_value = rhs->constant_expression_value();
+ if (!constant_value) {
+ _mesa_glsl_error(& initializer_loc, state,
+ "initializer of %s variable `%s' must be a "
+ "constant expression",
+ (type->qualifier.flags.q.constant)
+ ? "const" : "uniform",
+ decl->identifier);
+ if (var->type->is_numeric()) {
+ /* Reduce cascading errors. */
+ var->constant_value = ir_constant::zero(state, var->type);
+ }
+ } else {
+ rhs = constant_value;
+ var->constant_value = constant_value;
+ }
+ } else {
+ _mesa_glsl_error(&initializer_loc, state,
+ "initializer of type %s cannot be assigned to "
+ "variable of type %s",
+ rhs->type->name, var->type->name);
+ if (var->type->is_numeric()) {
+ /* Reduce cascading errors. */
+ var->constant_value = ir_constant::zero(state, var->type);
+ }
+ }
+ }
+
+ if (rhs && !rhs->type->is_error()) {
+ bool temp = var->read_only;
+ if (type->qualifier.flags.q.constant)
+ var->read_only = false;
+
+ /* Never emit code to initialize a uniform.
+ */
+ const glsl_type *initializer_type;
+ if (!type->qualifier.flags.q.uniform) {
+ result = do_assignment(initializer_instructions, state,
+ lhs, rhs,
+ type->get_location());
+ initializer_type = result->type;
+ } else
+ initializer_type = rhs->type;
+
+ /* If the declared variable is an unsized array, it must inherrit
+ * its full type from the initializer. A declaration such as
+ *
+ * uniform float a[] = float[](1.0, 2.0, 3.0, 3.0);
+ *
+ * becomes
+ *
+ * uniform float a[4] = float[](1.0, 2.0, 3.0, 3.0);
+ *
+ * The assignment generated in the if-statement (below) will also
+ * automatically handle this case for non-uniforms.
+ *
+ * If the declared variable is not an array, the types must
+ * already match exactly. As a result, the type assignment
+ * here can be done unconditionally. For non-uniforms the call
+ * to do_assignment can change the type of the initializer (via
+ * the implicit conversion rules). For uniforms the initializer
+ * must be a constant expression, and the type of that expression
+ * was validated above.
+ */
+ var->type = initializer_type;
+
+ var->read_only = temp;
+ }
+
+ return result;
+}
+
+ir_rvalue *
+ast_declarator_list::hir(exec_list *instructions,
+ struct _mesa_glsl_parse_state *state)
+{
+ void *ctx = state;
+ const struct glsl_type *decl_type;
+ const char *type_name = NULL;
+ ir_rvalue *result = NULL;
+ YYLTYPE loc = this->get_location();
+
+ /* From page 46 (page 52 of the PDF) of the GLSL 1.50 spec:
+ *
+ * "To ensure that a particular output variable is invariant, it is
+ * necessary to use the invariant qualifier. It can either be used to
+ * qualify a previously declared variable as being invariant
+ *
+ * invariant gl_Position; // make existing gl_Position be invariant"
+ *
+ * In these cases the parser will set the 'invariant' flag in the declarator
+ * list, and the type will be NULL.
+ */
+ if (this->invariant) {
+ assert(this->type == NULL);
+
+ if (state->current_function != NULL) {
+ _mesa_glsl_error(& loc, state,
+ "All uses of `invariant' keyword must be at global "
+ "scope\n");
+ }
+
+ foreach_list_typed (ast_declaration, decl, link, &this->declarations) {
+ assert(!decl->is_array);
+ assert(decl->array_size == NULL);
+ assert(decl->initializer == NULL);
+
+ ir_variable *const earlier =
+ state->symbols->get_variable(decl->identifier);
+ if (earlier == NULL) {
+ _mesa_glsl_error(& loc, state,
+ "Undeclared variable `%s' cannot be marked "
+ "invariant\n", decl->identifier);
+ } else if ((state->target == vertex_shader)
+ && (earlier->mode != ir_var_out)) {
+ _mesa_glsl_error(& loc, state,
+ "`%s' cannot be marked invariant, vertex shader "
+ "outputs only\n", decl->identifier);
+ } else if ((state->target == fragment_shader)
+ && (earlier->mode != ir_var_in)) {
+ _mesa_glsl_error(& loc, state,
+ "`%s' cannot be marked invariant, fragment shader "
+ "inputs only\n", decl->identifier);
+ } else if (earlier->used) {
+ _mesa_glsl_error(& loc, state,
+ "variable `%s' may not be redeclared "
+ "`invariant' after being used",
+ earlier->name);
+ } else {
+ earlier->invariant = true;
+ }
+ }
+
+ /* Invariant redeclarations do not have r-values.
+ */
+ return NULL;
+ }
+
+ assert(this->type != NULL);
+ assert(!this->invariant);
+
+ /* The type specifier may contain a structure definition. Process that
+ * before any of the variable declarations.
+ */
+ (void) this->type->specifier->hir(instructions, state);
+
+ decl_type = this->type->specifier->glsl_type(& type_name, state);
+ if (this->declarations.is_empty()) {
+ /* The only valid case where the declaration list can be empty is when
+ * the declaration is setting the default precision of a built-in type
+ * (e.g., 'precision highp vec4;').
+ */
+
+ if (decl_type != NULL) {
+ } else {
+ _mesa_glsl_error(& loc, state, "incomplete declaration");
+ }
+ }
+
+ foreach_list_typed (ast_declaration, decl, link, &this->declarations) {
+ const struct glsl_type *var_type;
+ ir_variable *var;
+
+ /* FINISHME: Emit a warning if a variable declaration shadows a
+ * FINISHME: declaration at a higher scope.
+ */
+
+ if ((decl_type == NULL) || decl_type->is_void()) {
+ if (type_name != NULL) {
+ _mesa_glsl_error(& loc, state,
+ "invalid type `%s' in declaration of `%s'",
+ type_name, decl->identifier);
+ } else {
+ _mesa_glsl_error(& loc, state,
+ "invalid type in declaration of `%s'",
+ decl->identifier);
+ }
+ continue;
+ }
+
+ if (decl->is_array) {
+ var_type = process_array_type(&loc, decl_type, decl->array_size,
+ state);
+ } else {
+ var_type = decl_type;
+ }
+
+ var = new(ctx) ir_variable(var_type, decl->identifier, ir_var_auto);
+
+ /* From page 22 (page 28 of the PDF) of the GLSL 1.10 specification;
+ *
+ * "Global variables can only use the qualifiers const,
+ * attribute, uni form, or varying. Only one may be
+ * specified.
+ *
+ * Local variables can only use the qualifier const."
+ *
+ * This is relaxed in GLSL 1.30. It is also relaxed by any extension
+ * that adds the 'layout' keyword.
+ */
+ if ((state->language_version < 130)
+ && !state->ARB_explicit_attrib_location_enable
+ && !state->ARB_fragment_coord_conventions_enable) {
+ if (this->type->qualifier.flags.q.out) {
+ _mesa_glsl_error(& loc, state,
+ "`out' qualifier in declaration of `%s' "
+ "only valid for function parameters in %s.",
+ decl->identifier, state->version_string);
+ }
+ if (this->type->qualifier.flags.q.in) {
+ _mesa_glsl_error(& loc, state,
+ "`in' qualifier in declaration of `%s' "
+ "only valid for function parameters in %s.",
+ decl->identifier, state->version_string);
+ }
+ /* FINISHME: Test for other invalid qualifiers. */
+ }
+
+ apply_type_qualifier_to_variable(& this->type->qualifier, var, state,
+ & loc);
+
+ if (this->type->qualifier.flags.q.invariant) {
+ if ((state->target == vertex_shader) && !(var->mode == ir_var_out ||
+ var->mode == ir_var_inout)) {
+ /* FINISHME: Note that this doesn't work for invariant on
+ * a function signature outval
+ */
+ _mesa_glsl_error(& loc, state,
+ "`%s' cannot be marked invariant, vertex shader "
+ "outputs only\n", var->name);
+ } else if ((state->target == fragment_shader) &&
+ !(var->mode == ir_var_in || var->mode == ir_var_inout)) {
+ /* FINISHME: Note that this doesn't work for invariant on
+ * a function signature inval
+ */
+ _mesa_glsl_error(& loc, state,
+ "`%s' cannot be marked invariant, fragment shader "
+ "inputs only\n", var->name);
+ }
+ }
+
+ if (state->current_function != NULL) {
+ const char *mode = NULL;
+ const char *extra = "";
+
+ /* There is no need to check for 'inout' here because the parser will
+ * only allow that in function parameter lists.
+ */
+ if (this->type->qualifier.flags.q.attribute) {
+ mode = "attribute";
+ } else if (this->type->qualifier.flags.q.uniform) {
+ mode = "uniform";
+ } else if (this->type->qualifier.flags.q.varying) {
+ mode = "varying";
+ } else if (this->type->qualifier.flags.q.in) {
+ mode = "in";
+ extra = " or in function parameter list";
+ } else if (this->type->qualifier.flags.q.out) {
+ mode = "out";
+ extra = " or in function parameter list";
+ }
+
+ if (mode) {
+ _mesa_glsl_error(& loc, state,
+ "%s variable `%s' must be declared at "
+ "global scope%s",
+ mode, var->name, extra);
+ }
+ } else if (var->mode == ir_var_in) {
+ var->read_only = true;
+
+ if (state->target == vertex_shader) {
+ bool error_emitted = false;
+
+ /* From page 31 (page 37 of the PDF) of the GLSL 1.50 spec:
+ *
+ * "Vertex shader inputs can only be float, floating-point
+ * vectors, matrices, signed and unsigned integers and integer
+ * vectors. Vertex shader inputs can also form arrays of these
+ * types, but not structures."
+ *
+ * From page 31 (page 27 of the PDF) of the GLSL 1.30 spec:
+ *
+ * "Vertex shader inputs can only be float, floating-point
+ * vectors, matrices, signed and unsigned integers and integer
+ * vectors. They cannot be arrays or structures."
+ *
+ * From page 23 (page 29 of the PDF) of the GLSL 1.20 spec:
+ *
+ * "The attribute qualifier can be used only with float,
+ * floating-point vectors, and matrices. Attribute variables
+ * cannot be declared as arrays or structures."
+ */
+ const glsl_type *check_type = var->type->is_array()
+ ? var->type->fields.array : var->type;
+
+ switch (check_type->base_type) {
+ case GLSL_TYPE_FLOAT:
+ break;
+ case GLSL_TYPE_UINT:
+ case GLSL_TYPE_INT:
+ if (state->language_version > 120)
+ break;
+ /* FALLTHROUGH */
+ default:
+ _mesa_glsl_error(& loc, state,
+ "vertex shader input / attribute cannot have "
+ "type %s`%s'",
+ var->type->is_array() ? "array of " : "",
+ check_type->name);
+ error_emitted = true;
+ }
+
+ if (!error_emitted && (state->language_version <= 130)
+ && var->type->is_array()) {
+ _mesa_glsl_error(& loc, state,
+ "vertex shader input / attribute cannot have "
+ "array type");
+ error_emitted = true;
+ }
+ }
+ }
+
+ /* Integer vertex outputs must be qualified with 'flat'.
+ *
+ * From section 4.3.6 of the GLSL 1.30 spec:
+ * "If a vertex output is a signed or unsigned integer or integer
+ * vector, then it must be qualified with the interpolation qualifier
+ * flat."
+ */
+ if (state->language_version >= 130
+ && state->target == vertex_shader
+ && state->current_function == NULL
+ && var->type->is_integer()
+ && var->mode == ir_var_out
+ && var->interpolation != ir_var_flat) {
+
+ _mesa_glsl_error(&loc, state, "If a vertex output is an integer, "
+ "then it must be qualified with 'flat'");
+ }
+
+
+ /* Interpolation qualifiers cannot be applied to 'centroid' and
+ * 'centroid varying'.
+ *
+ * From page 29 (page 35 of the PDF) of the GLSL 1.30 spec:
+ * "interpolation qualifiers may only precede the qualifiers in,
+ * centroid in, out, or centroid out in a declaration. They do not apply
+ * to the deprecated storage qualifiers varying or centroid varying."
+ */
+ if (state->language_version >= 130
+ && this->type->qualifier.has_interpolation()
+ && this->type->qualifier.flags.q.varying) {
+
+ const char *i = this->type->qualifier.interpolation_string();
+ assert(i != NULL);
+ const char *s;
+ if (this->type->qualifier.flags.q.centroid)
+ s = "centroid varying";
+ else
+ s = "varying";
+
+ _mesa_glsl_error(&loc, state,
+ "qualifier '%s' cannot be applied to the "
+ "deprecated storage qualifier '%s'", i, s);
+ }
+
+
+ /* Interpolation qualifiers can only apply to vertex shader outputs and
+ * fragment shader inputs.
+ *
+ * From page 29 (page 35 of the PDF) of the GLSL 1.30 spec:
+ * "Outputs from a vertex shader (out) and inputs to a fragment
+ * shader (in) can be further qualified with one or more of these
+ * interpolation qualifiers"
+ */
+ if (state->language_version >= 130
+ && this->type->qualifier.has_interpolation()) {
+
+ const char *i = this->type->qualifier.interpolation_string();
+ assert(i != NULL);
+
+ switch (state->target) {
+ case vertex_shader:
+ if (this->type->qualifier.flags.q.in) {
+ _mesa_glsl_error(&loc, state,
+ "qualifier '%s' cannot be applied to vertex "
+ "shader inputs", i);
+ }
+ break;
+ case fragment_shader:
+ if (this->type->qualifier.flags.q.out) {
+ _mesa_glsl_error(&loc, state,
+ "qualifier '%s' cannot be applied to fragment "
+ "shader outputs", i);
+ }
+ break;
+ default:
+ assert(0);
+ }
+ }
+
+
+ /* From section 4.3.4 of the GLSL 1.30 spec:
+ * "It is an error to use centroid in in a vertex shader."
+ */
+ if (state->language_version >= 130
+ && this->type->qualifier.flags.q.centroid
+ && this->type->qualifier.flags.q.in
+ && state->target == vertex_shader) {
+
+ _mesa_glsl_error(&loc, state,
+ "'centroid in' cannot be used in a vertex shader");
+ }
+
+
+ /* Precision qualifiers exists only in GLSL versions 1.00 and >= 1.30.
+ */
+ if (this->type->specifier->precision != ast_precision_none
+ && state->language_version != 100
+ && state->language_version < 130) {
+
+ _mesa_glsl_error(&loc, state,
+ "precision qualifiers are supported only in GLSL ES "
+ "1.00, and GLSL 1.30 and later");
+ }
+
+
+ /* Precision qualifiers only apply to floating point and integer types.
+ *
+ * From section 4.5.2 of the GLSL 1.30 spec:
+ * "Any floating point or any integer declaration can have the type
+ * preceded by one of these precision qualifiers [...] Literal
+ * constants do not have precision qualifiers. Neither do Boolean
+ * variables.
+ */
+ if (this->type->specifier->precision != ast_precision_none
+ && !var->type->is_float()
+ && !var->type->is_integer()
+ && !(var->type->is_array()
+ && (var->type->fields.array->is_float()
+ || var->type->fields.array->is_integer()))) {
+
+ _mesa_glsl_error(&loc, state,
+ "precision qualifiers apply only to floating point "
+ "and integer types");
+ }
+
+ /* Process the initializer and add its instructions to a temporary
+ * list. This list will be added to the instruction stream (below) after
+ * the declaration is added. This is done because in some cases (such as
+ * redeclarations) the declaration may not actually be added to the
+ * instruction stream.
+ */
+ exec_list initializer_instructions;
+ ir_variable *earlier = get_variable_being_redeclared(var, decl, state);
+
+ if (decl->initializer != NULL) {
+ result = process_initializer((earlier == NULL) ? var : earlier,
+ decl, this->type,
+ &initializer_instructions, state);
+ }
+
+ /* From page 23 (page 29 of the PDF) of the GLSL 1.10 spec:
+ *
+ * "It is an error to write to a const variable outside of
+ * its declaration, so they must be initialized when
+ * declared."
+ */
+ if (this->type->qualifier.flags.q.constant && decl->initializer == NULL) {
+ _mesa_glsl_error(& loc, state,
+ "const declaration of `%s' must be initialized",
+ decl->identifier);
+ }
+
+ /* If the declaration is not a redeclaration, there are a few additional
+ * semantic checks that must be applied. In addition, variable that was
+ * created for the declaration should be added to the IR stream.
+ */
+ if (earlier == NULL) {
+ /* From page 15 (page 21 of the PDF) of the GLSL 1.10 spec,
+ *
+ * "Identifiers starting with "gl_" are reserved for use by
+ * OpenGL, and may not be declared in a shader as either a
+ * variable or a function."
+ */
+ if (strncmp(decl->identifier, "gl_", 3) == 0)
+ _mesa_glsl_error(& loc, state,
+ "identifier `%s' uses reserved `gl_' prefix",
+ decl->identifier);
+
+ /* Add the variable to the symbol table. Note that the initializer's
+ * IR was already processed earlier (though it hasn't been emitted
+ * yet), without the variable in scope.
+ *
+ * This differs from most C-like languages, but it follows the GLSL
+ * specification. From page 28 (page 34 of the PDF) of the GLSL 1.50
+ * spec:
+ *
+ * "Within a declaration, the scope of a name starts immediately
+ * after the initializer if present or immediately after the name
+ * being declared if not."
+ */
+ if (!state->symbols->add_variable(var)) {
+ YYLTYPE loc = this->get_location();
+ _mesa_glsl_error(&loc, state, "name `%s' already taken in the "
+ "current scope", decl->identifier);
+ continue;
+ }
+
+ /* Push the variable declaration to the top. It means that all the
+ * variable declarations will appear in a funny last-to-first order,
+ * but otherwise we run into trouble if a function is prototyped, a
+ * global var is decled, then the function is defined with usage of
+ * the global var. See glslparsertest's CorrectModule.frag.
+ */
+ instructions->push_head(var);
+ }
+
+ instructions->append_list(&initializer_instructions);
+ }
+
+
+ /* Generally, variable declarations do not have r-values. However,
+ * one is used for the declaration in
+ *
+ * while (bool b = some_condition()) {
+ * ...
+ * }
+ *
+ * so we return the rvalue from the last seen declaration here.
+ */
+ return result;
+}
+
+
+ir_rvalue *
+ast_parameter_declarator::hir(exec_list *instructions,
+ struct _mesa_glsl_parse_state *state)
+{
+ void *ctx = state;
+ const struct glsl_type *type;
+ const char *name = NULL;
+ YYLTYPE loc = this->get_location();
+
+ type = this->type->specifier->glsl_type(& name, state);
+
+ if (type == NULL) {
+ if (name != NULL) {
+ _mesa_glsl_error(& loc, state,
+ "invalid type `%s' in declaration of `%s'",
+ name, this->identifier);
+ } else {
+ _mesa_glsl_error(& loc, state,
+ "invalid type in declaration of `%s'",
+ this->identifier);
+ }
+
+ type = glsl_type::error_type;
+ }
+
+ /* From page 62 (page 68 of the PDF) of the GLSL 1.50 spec:
+ *
+ * "Functions that accept no input arguments need not use void in the
+ * argument list because prototypes (or definitions) are required and
+ * therefore there is no ambiguity when an empty argument list "( )" is
+ * declared. The idiom "(void)" as a parameter list is provided for
+ * convenience."
+ *
+ * Placing this check here prevents a void parameter being set up
+ * for a function, which avoids tripping up checks for main taking
+ * parameters and lookups of an unnamed symbol.
+ */
+ if (type->is_void()) {
+ if (this->identifier != NULL)
+ _mesa_glsl_error(& loc, state,
+ "named parameter cannot have type `void'");
+
+ is_void = true;
+ return NULL;
+ }
+
+ if (formal_parameter && (this->identifier == NULL)) {
+ _mesa_glsl_error(& loc, state, "formal parameter lacks a name");
+ return NULL;
+ }
+
+ /* This only handles "vec4 foo[..]". The earlier specifier->glsl_type(...)
+ * call already handled the "vec4[..] foo" case.
+ */
+ if (this->is_array) {
+ type = process_array_type(&loc, type, this->array_size, state);
+ }
+
+ if (type->array_size() == 0) {
+ _mesa_glsl_error(&loc, state, "arrays passed as parameters must have "
+ "a declared size.");
+ type = glsl_type::error_type;
+ }
+
+ is_void = false;
+ ir_variable *var = new(ctx) ir_variable(type, this->identifier, ir_var_in);
+
+ /* Apply any specified qualifiers to the parameter declaration. Note that
+ * for function parameters the default mode is 'in'.
+ */
+ apply_type_qualifier_to_variable(& this->type->qualifier, var, state, & loc);
+
+ instructions->push_tail(var);
+
+ /* Parameter declarations do not have r-values.
+ */
+ return NULL;
+}
+
+
+void
+ast_parameter_declarator::parameters_to_hir(exec_list *ast_parameters,
+ bool formal,
+ exec_list *ir_parameters,
+ _mesa_glsl_parse_state *state)
+{
+ ast_parameter_declarator *void_param = NULL;
+ unsigned count = 0;
+
+ foreach_list_typed (ast_parameter_declarator, param, link, ast_parameters) {
+ param->formal_parameter = formal;
+ param->hir(ir_parameters, state);
+
+ if (param->is_void)
+ void_param = param;
+
+ count++;
+ }
+
+ if ((void_param != NULL) && (count > 1)) {
+ YYLTYPE loc = void_param->get_location();
+
+ _mesa_glsl_error(& loc, state,
+ "`void' parameter must be only parameter");
+ }
+}
+
+
+void
+emit_function(_mesa_glsl_parse_state *state, exec_list *instructions,
+ ir_function *f)
+{
+ /* Emit the new function header */
+ if (state->current_function == NULL) {
+ instructions->push_tail(f);
+ } else {
+ /* IR invariants disallow function declarations or definitions nested
+ * within other function definitions. Insert the new ir_function
+ * block in the instruction sequence before the ir_function block
+ * containing the current ir_function_signature.
+ */
+ ir_function *const curr =
+ const_cast<ir_function *>(state->current_function->function());
+
+ curr->insert_before(f);
+ }
+}
+
+
+ir_rvalue *
+ast_function::hir(exec_list *instructions,
+ struct _mesa_glsl_parse_state *state)
+{
+ void *ctx = state;
+ ir_function *f = NULL;
+ ir_function_signature *sig = NULL;
+ exec_list hir_parameters;
+
+ const char *const name = identifier;
+
+ /* From page 21 (page 27 of the PDF) of the GLSL 1.20 spec,
+ *
+ * "Function declarations (prototypes) cannot occur inside of functions;
+ * they must be at global scope, or for the built-in functions, outside
+ * the global scope."
+ *
+ * From page 27 (page 33 of the PDF) of the GLSL ES 1.00.16 spec,
+ *
+ * "User defined functions may only be defined within the global scope."
+ *
+ * Note that this language does not appear in GLSL 1.10.
+ */
+ if ((state->current_function != NULL) && (state->language_version != 110)) {
+ YYLTYPE loc = this->get_location();
+ _mesa_glsl_error(&loc, state,
+ "declaration of function `%s' not allowed within "
+ "function body", name);
+ }
+
+ /* From page 15 (page 21 of the PDF) of the GLSL 1.10 spec,
+ *
+ * "Identifiers starting with "gl_" are reserved for use by
+ * OpenGL, and may not be declared in a shader as either a
+ * variable or a function."
+ */
+ if (strncmp(name, "gl_", 3) == 0) {
+ YYLTYPE loc = this->get_location();
+ _mesa_glsl_error(&loc, state,
+ "identifier `%s' uses reserved `gl_' prefix", name);
+ }
+
+ /* Convert the list of function parameters to HIR now so that they can be
+ * used below to compare this function's signature with previously seen
+ * signatures for functions with the same name.
+ */
+ ast_parameter_declarator::parameters_to_hir(& this->parameters,
+ is_definition,
+ & hir_parameters, state);
+
+ const char *return_type_name;
+ const glsl_type *return_type =
+ this->return_type->specifier->glsl_type(& return_type_name, state);
+
+ if (!return_type) {
+ YYLTYPE loc = this->get_location();
+ _mesa_glsl_error(&loc, state,
+ "function `%s' has undeclared return type `%s'",
+ name, return_type_name);
+ return_type = glsl_type::error_type;
+ }
+
+ /* From page 56 (page 62 of the PDF) of the GLSL 1.30 spec:
+ * "No qualifier is allowed on the return type of a function."
+ */
+ if (this->return_type->has_qualifiers()) {
+ YYLTYPE loc = this->get_location();
+ _mesa_glsl_error(& loc, state,
+ "function `%s' return type has qualifiers", name);
+ }
+
+ /* Verify that this function's signature either doesn't match a previously
+ * seen signature for a function with the same name, or, if a match is found,
+ * that the previously seen signature does not have an associated definition.
+ */
+ f = state->symbols->get_function(name);
+ if (f != NULL && (state->es_shader || f->has_user_signature())) {
+ sig = f->exact_matching_signature(&hir_parameters);
+ if (sig != NULL) {
+ const char *badvar = sig->qualifiers_match(&hir_parameters);
+ if (badvar != NULL) {
+ YYLTYPE loc = this->get_location();
+
+ _mesa_glsl_error(&loc, state, "function `%s' parameter `%s' "
+ "qualifiers don't match prototype", name, badvar);
+ }
+
+ if (sig->return_type != return_type) {
+ YYLTYPE loc = this->get_location();
+
+ _mesa_glsl_error(&loc, state, "function `%s' return type doesn't "
+ "match prototype", name);
+ }
+
+ if (is_definition && sig->is_defined) {
+ YYLTYPE loc = this->get_location();
+
+ _mesa_glsl_error(& loc, state, "function `%s' redefined", name);
+ }
+ }
+ } else {
+ f = new(ctx) ir_function(name);
+ if (!state->symbols->add_function(f)) {
+ /* This function name shadows a non-function use of the same name. */
+ YYLTYPE loc = this->get_location();
+
+ _mesa_glsl_error(&loc, state, "function name `%s' conflicts with "
+ "non-function", name);
+ return NULL;
+ }
+
+ emit_function(state, instructions, f);
+ }
+
+ /* Verify the return type of main() */
+ if (strcmp(name, "main") == 0) {
+ if (! return_type->is_void()) {
+ YYLTYPE loc = this->get_location();
+
+ _mesa_glsl_error(& loc, state, "main() must return void");
+ }
+
+ if (!hir_parameters.is_empty()) {
+ YYLTYPE loc = this->get_location();
+
+ _mesa_glsl_error(& loc, state, "main() must not take any parameters");
+ }
+ }
+
+ /* Finish storing the information about this new function in its signature.
+ */
+ if (sig == NULL) {
+ sig = new(ctx) ir_function_signature(return_type);
+ f->add_signature(sig);
+ }
+
+ sig->replace_parameters(&hir_parameters);
+ signature = sig;
+
+ /* Function declarations (prototypes) do not have r-values.
+ */
+ return NULL;
+}
+
+
+ir_rvalue *
+ast_function_definition::hir(exec_list *instructions,
+ struct _mesa_glsl_parse_state *state)
+{
+ prototype->is_definition = true;
+ prototype->hir(instructions, state);
+
+ ir_function_signature *signature = prototype->signature;
+ if (signature == NULL)
+ return NULL;
+
+ assert(state->current_function == NULL);
+ state->current_function = signature;
+ state->found_return = false;
+
+ /* Duplicate parameters declared in the prototype as concrete variables.
+ * Add these to the symbol table.
+ */
+ state->symbols->push_scope();
+ foreach_iter(exec_list_iterator, iter, signature->parameters) {
+ ir_variable *const var = ((ir_instruction *) iter.get())->as_variable();
+
+ assert(var != NULL);
+
+ /* The only way a parameter would "exist" is if two parameters have
+ * the same name.
+ */
+ if (state->symbols->name_declared_this_scope(var->name)) {
+ YYLTYPE loc = this->get_location();
+
+ _mesa_glsl_error(& loc, state, "parameter `%s' redeclared", var->name);
+ } else {
+ state->symbols->add_variable(var);
+ }
+ }
+
+ /* Convert the body of the function to HIR. */
+ this->body->hir(&signature->body, state);
+ signature->is_defined = true;
+
+ state->symbols->pop_scope();
+
+ assert(state->current_function == signature);
+ state->current_function = NULL;
+
+ if (!signature->return_type->is_void() && !state->found_return) {
+ YYLTYPE loc = this->get_location();
+ _mesa_glsl_error(& loc, state, "function `%s' has non-void return type "
+ "%s, but no return statement",
+ signature->function_name(),
+ signature->return_type->name);
+ }
+
+ /* Function definitions do not have r-values.
+ */
+ return NULL;
+}
+
+
+ir_rvalue *
+ast_jump_statement::hir(exec_list *instructions,
+ struct _mesa_glsl_parse_state *state)
+{
+ void *ctx = state;
+
+ switch (mode) {
+ case ast_return: {
+ ir_return *inst;
+ assert(state->current_function);
+
+ if (opt_return_value) {
+ ir_rvalue *const ret = opt_return_value->hir(instructions, state);
+
+ /* The value of the return type can be NULL if the shader says
+ * 'return foo();' and foo() is a function that returns void.
+ *
+ * NOTE: The GLSL spec doesn't say that this is an error. The type
+ * of the return value is void. If the return type of the function is
+ * also void, then this should compile without error. Seriously.
+ */
+ const glsl_type *const ret_type =
+ (ret == NULL) ? glsl_type::void_type : ret->type;
+
+ /* Implicit conversions are not allowed for return values. */
+ if (state->current_function->return_type != ret_type) {
+ YYLTYPE loc = this->get_location();
+
+ _mesa_glsl_error(& loc, state,
+ "`return' with wrong type %s, in function `%s' "
+ "returning %s",
+ ret_type->name,
+ state->current_function->function_name(),
+ state->current_function->return_type->name);
+ }
+
+ inst = new(ctx) ir_return(ret);
+ } else {
+ if (state->current_function->return_type->base_type !=
+ GLSL_TYPE_VOID) {
+ YYLTYPE loc = this->get_location();
+
+ _mesa_glsl_error(& loc, state,
+ "`return' with no value, in function %s returning "
+ "non-void",
+ state->current_function->function_name());
+ }
+ inst = new(ctx) ir_return;
+ }
+
+ state->found_return = true;
+ instructions->push_tail(inst);
+ break;
+ }
+
+ case ast_discard:
+ if (state->target != fragment_shader) {
+ YYLTYPE loc = this->get_location();
+
+ _mesa_glsl_error(& loc, state,
+ "`discard' may only appear in a fragment shader");
+ }
+ instructions->push_tail(new(ctx) ir_discard);
+ break;
+
+ case ast_break:
+ case ast_continue:
+ /* FINISHME: Handle switch-statements. They cannot contain 'continue',
+ * FINISHME: and they use a different IR instruction for 'break'.
+ */
+ /* FINISHME: Correctly handle the nesting. If a switch-statement is
+ * FINISHME: inside a loop, a 'continue' is valid and will bind to the
+ * FINISHME: loop.
+ */
+ if (state->loop_or_switch_nesting == NULL) {
+ YYLTYPE loc = this->get_location();
+
+ _mesa_glsl_error(& loc, state,
+ "`%s' may only appear in a loop",
+ (mode == ast_break) ? "break" : "continue");
+ } else {
+ ir_loop *const loop = state->loop_or_switch_nesting->as_loop();
+
+ /* Inline the for loop expression again, since we don't know
+ * where near the end of the loop body the normal copy of it
+ * is going to be placed.
+ */
+ if (mode == ast_continue &&
+ state->loop_or_switch_nesting_ast->rest_expression) {
+ state->loop_or_switch_nesting_ast->rest_expression->hir(instructions,
+ state);
+ }
+
+ if (loop != NULL) {
+ ir_loop_jump *const jump =
+ new(ctx) ir_loop_jump((mode == ast_break)
+ ? ir_loop_jump::jump_break
+ : ir_loop_jump::jump_continue);
+ instructions->push_tail(jump);
+ }
+ }
+
+ break;
+ }
+
+ /* Jump instructions do not have r-values.
+ */
+ return NULL;
+}
+
+
+ir_rvalue *
+ast_selection_statement::hir(exec_list *instructions,
+ struct _mesa_glsl_parse_state *state)
+{
+ void *ctx = state;
+
+ ir_rvalue *const condition = this->condition->hir(instructions, state);
+
+ /* From page 66 (page 72 of the PDF) of the GLSL 1.50 spec:
+ *
+ * "Any expression whose type evaluates to a Boolean can be used as the
+ * conditional expression bool-expression. Vector types are not accepted
+ * as the expression to if."
+ *
+ * The checks are separated so that higher quality diagnostics can be
+ * generated for cases where both rules are violated.
+ */
+ if (!condition->type->is_boolean() || !condition->type->is_scalar()) {
+ YYLTYPE loc = this->condition->get_location();
+
+ _mesa_glsl_error(& loc, state, "if-statement condition must be scalar "
+ "boolean");
+ }
+
+ ir_if *const stmt = new(ctx) ir_if(condition);
+
+ if (then_statement != NULL) {
+ state->symbols->push_scope();
+ then_statement->hir(& stmt->then_instructions, state);
+ state->symbols->pop_scope();
+ }
+
+ if (else_statement != NULL) {
+ state->symbols->push_scope();
+ else_statement->hir(& stmt->else_instructions, state);
+ state->symbols->pop_scope();
+ }
+
+ instructions->push_tail(stmt);
+
+ /* if-statements do not have r-values.
+ */
+ return NULL;
+}
+
+
+void
+ast_iteration_statement::condition_to_hir(ir_loop *stmt,
+ struct _mesa_glsl_parse_state *state)
+{
+ void *ctx = state;
+
+ if (condition != NULL) {
+ ir_rvalue *const cond =
+ condition->hir(& stmt->body_instructions, state);
+
+ if ((cond == NULL)
+ || !cond->type->is_boolean() || !cond->type->is_scalar()) {
+ YYLTYPE loc = condition->get_location();
+
+ _mesa_glsl_error(& loc, state,
+ "loop condition must be scalar boolean");
+ } else {
+ /* As the first code in the loop body, generate a block that looks
+ * like 'if (!condition) break;' as the loop termination condition.
+ */
+ ir_rvalue *const not_cond =
+ new(ctx) ir_expression(ir_unop_logic_not, glsl_type::bool_type, cond,
+ NULL);
+
+ ir_if *const if_stmt = new(ctx) ir_if(not_cond);
+
+ ir_jump *const break_stmt =
+ new(ctx) ir_loop_jump(ir_loop_jump::jump_break);
+
+ if_stmt->then_instructions.push_tail(break_stmt);
+ stmt->body_instructions.push_tail(if_stmt);
+ }
+ }
+}
+
+
+ir_rvalue *
+ast_iteration_statement::hir(exec_list *instructions,
+ struct _mesa_glsl_parse_state *state)
+{
+ void *ctx = state;
+
+ /* For-loops and while-loops start a new scope, but do-while loops do not.
+ */
+ if (mode != ast_do_while)
+ state->symbols->push_scope();
+
+ if (init_statement != NULL)
+ init_statement->hir(instructions, state);
+
+ ir_loop *const stmt = new(ctx) ir_loop();
+ instructions->push_tail(stmt);
+
+ /* Track the current loop and / or switch-statement nesting.
+ */
+ ir_instruction *const nesting = state->loop_or_switch_nesting;
+ ast_iteration_statement *nesting_ast = state->loop_or_switch_nesting_ast;
+
+ state->loop_or_switch_nesting = stmt;
+ state->loop_or_switch_nesting_ast = this;
+
+ if (mode != ast_do_while)
+ condition_to_hir(stmt, state);
+
+ if (body != NULL)
+ body->hir(& stmt->body_instructions, state);
+
+ if (rest_expression != NULL)
+ rest_expression->hir(& stmt->body_instructions, state);
+
+ if (mode == ast_do_while)
+ condition_to_hir(stmt, state);
+
+ if (mode != ast_do_while)
+ state->symbols->pop_scope();
+
+ /* Restore previous nesting before returning.
+ */
+ state->loop_or_switch_nesting = nesting;
+ state->loop_or_switch_nesting_ast = nesting_ast;
+
+ /* Loops do not have r-values.
+ */
+ return NULL;
+}
+
+
+ir_rvalue *
+ast_type_specifier::hir(exec_list *instructions,
+ struct _mesa_glsl_parse_state *state)
+{
+ if (!this->is_precision_statement && this->structure == NULL)
+ return NULL;
+
+ YYLTYPE loc = this->get_location();
+
+ if (this->precision != ast_precision_none
+ && state->language_version != 100
+ && state->language_version < 130) {
+ _mesa_glsl_error(&loc, state,
+ "precision qualifiers exist only in "
+ "GLSL ES 1.00, and GLSL 1.30 and later");
+ return NULL;
+ }
+ if (this->precision != ast_precision_none
+ && this->structure != NULL) {
+ _mesa_glsl_error(&loc, state,
+ "precision qualifiers do not apply to structures");
+ return NULL;
+ }
+
+ /* If this is a precision statement, check that the type to which it is
+ * applied is either float or int.
+ *
+ * From section 4.5.3 of the GLSL 1.30 spec:
+ * "The precision statement
+ * precision precision-qualifier type;
+ * can be used to establish a default precision qualifier. The type
+ * field can be either int or float [...]. Any other types or
+ * qualifiers will result in an error.
+ */
+ if (this->is_precision_statement) {
+ assert(this->precision != ast_precision_none);
+ assert(this->structure == NULL); /* The check for structures was
+ * performed above. */
+ if (this->is_array) {
+ _mesa_glsl_error(&loc, state,
+ "default precision statements do not apply to "
+ "arrays");
+ return NULL;
+ }
+ if (this->type_specifier != ast_float
+ && this->type_specifier != ast_int) {
+ _mesa_glsl_error(&loc, state,
+ "default precision statements apply only to types "
+ "float and int");
+ return NULL;
+ }
+
+ /* FINISHME: Translate precision statements into IR. */
+ return NULL;
+ }
+
+ if (this->structure != NULL)
+ return this->structure->hir(instructions, state);
+
+ return NULL;
+}
+
+
+ir_rvalue *
+ast_struct_specifier::hir(exec_list *instructions,
+ struct _mesa_glsl_parse_state *state)
+{
+ unsigned decl_count = 0;
+
+ /* Make an initial pass over the list of structure fields to determine how
+ * many there are. Each element in this list is an ast_declarator_list.
+ * This means that we actually need to count the number of elements in the
+ * 'declarations' list in each of the elements.
+ */
+ foreach_list_typed (ast_declarator_list, decl_list, link,
+ &this->declarations) {
+ foreach_list_const (decl_ptr, & decl_list->declarations) {
+ decl_count++;
+ }
+ }
+
+ /* Allocate storage for the structure fields and process the field
+ * declarations. As the declarations are processed, try to also convert
+ * the types to HIR. This ensures that structure definitions embedded in
+ * other structure definitions are processed.
+ */
+ glsl_struct_field *const fields = ralloc_array(state, glsl_struct_field,
+ decl_count);
+
+ unsigned i = 0;
+ foreach_list_typed (ast_declarator_list, decl_list, link,
+ &this->declarations) {
+ const char *type_name;
+
+ decl_list->type->specifier->hir(instructions, state);
+
+ /* Section 10.9 of the GLSL ES 1.00 specification states that
+ * embedded structure definitions have been removed from the language.
+ */
+ if (state->es_shader && decl_list->type->specifier->structure != NULL) {
+ YYLTYPE loc = this->get_location();
+ _mesa_glsl_error(&loc, state, "Embedded structure definitions are "
+ "not allowed in GLSL ES 1.00.");
+ }
+
+ const glsl_type *decl_type =
+ decl_list->type->specifier->glsl_type(& type_name, state);
+
+ foreach_list_typed (ast_declaration, decl, link,
+ &decl_list->declarations) {
+ const struct glsl_type *field_type = decl_type;
+ if (decl->is_array) {
+ YYLTYPE loc = decl->get_location();
+ field_type = process_array_type(&loc, decl_type, decl->array_size,
+ state);
+ }
+ fields[i].type = (field_type != NULL)
+ ? field_type : glsl_type::error_type;
+ fields[i].name = decl->identifier;
+ i++;
+ }
+ }
+
+ assert(i == decl_count);
+
+ const glsl_type *t =
+ glsl_type::get_record_instance(fields, decl_count, this->name);
+
+ YYLTYPE loc = this->get_location();
+ if (!state->symbols->add_type(name, t)) {
+ _mesa_glsl_error(& loc, state, "struct `%s' previously defined", name);
+ } else {
+ const glsl_type **s = reralloc(state, state->user_structures,
+ const glsl_type *,
+ state->num_user_structures + 1);
+ if (s != NULL) {
+ s[state->num_user_structures] = t;
+ state->user_structures = s;
+ state->num_user_structures++;
+ }
+ }
+
+ /* Structure type definitions do not have r-values.
+ */
+ return NULL;
+}
|