diff options
Diffstat (limited to 'mesalib/src/glu/sgi/libnurbs/nurbtess/sampleCompBot.cc')
| -rw-r--r-- | mesalib/src/glu/sgi/libnurbs/nurbtess/sampleCompBot.cc | 844 |
1 files changed, 844 insertions, 0 deletions
diff --git a/mesalib/src/glu/sgi/libnurbs/nurbtess/sampleCompBot.cc b/mesalib/src/glu/sgi/libnurbs/nurbtess/sampleCompBot.cc new file mode 100644 index 000000000..e12f88bab --- /dev/null +++ b/mesalib/src/glu/sgi/libnurbs/nurbtess/sampleCompBot.cc @@ -0,0 +1,844 @@ +/* +** License Applicability. Except to the extent portions of this file are +** made subject to an alternative license as permitted in the SGI Free +** Software License B, Version 1.1 (the "License"), the contents of this +** file are subject only to the provisions of the License. You may not use +** this file except in compliance with the License. You may obtain a copy +** of the License at Silicon Graphics, Inc., attn: Legal Services, 1600 +** Amphitheatre Parkway, Mountain View, CA 94043-1351, or at: +** +** http://oss.sgi.com/projects/FreeB +** +** Note that, as provided in the License, the Software is distributed on an +** "AS IS" basis, with ALL EXPRESS AND IMPLIED WARRANTIES AND CONDITIONS +** DISCLAIMED, INCLUDING, WITHOUT LIMITATION, ANY IMPLIED WARRANTIES AND +** CONDITIONS OF MERCHANTABILITY, SATISFACTORY QUALITY, FITNESS FOR A +** PARTICULAR PURPOSE, AND NON-INFRINGEMENT. +** +** Original Code. The Original Code is: OpenGL Sample Implementation, +** Version 1.2.1, released January 26, 2000, developed by Silicon Graphics, +** Inc. The Original Code is Copyright (c) 1991-2000 Silicon Graphics, Inc. +** Copyright in any portions created by third parties is as indicated +** elsewhere herein. All Rights Reserved. +** +** Additional Notice Provisions: The application programming interfaces +** established by SGI in conjunction with the Original Code are The +** OpenGL(R) Graphics System: A Specification (Version 1.2.1), released +** April 1, 1999; The OpenGL(R) Graphics System Utility Library (Version +** 1.3), released November 4, 1998; and OpenGL(R) Graphics with the X +** Window System(R) (Version 1.3), released October 19, 1998. This software +** was created using the OpenGL(R) version 1.2.1 Sample Implementation +** published by SGI, but has not been independently verified as being +** compliant with the OpenGL(R) version 1.2.1 Specification. +** +*/ +/* +*/ + +#include <stdlib.h> +#include <stdio.h> +#include "zlassert.h" +#include "sampleCompBot.h" +#include "sampleCompRight.h" + +#define max(a,b) ((a>b)? a:b) + +//return: index_mono, index_pass +//from [pass, mono] is strictly U-monotone +//from [corner, pass] is <u +// vertex[pass][0] >= u +//if everybost is <u, then pass = end+1. +//otherwise both mono and pass are meanng full and we have corner<=pass<=mono<=end +void findBotLeftSegment(vertexArray* leftChain, + Int leftEnd, + Int leftCorner, + Real u, + Int& ret_index_mono, + Int& ret_index_pass) +{ + Int i; + + assert(leftCorner <= leftEnd); + for(i=leftCorner; i<= leftEnd; i++) + if(leftChain->getVertex(i)[0] >= u) + break; + ret_index_pass = i; + if(ret_index_pass <= leftEnd) + { + for(i=ret_index_pass; i< leftEnd; i++) + { + if(leftChain->getVertex(i+1)[0] <= leftChain->getVertex(i)[0]) + break; + } + ret_index_mono = i; + } + +} + +void findBotRightSegment(vertexArray* rightChain, + Int rightEnd, + Int rightCorner, + Real u, + Int& ret_index_mono, + Int& ret_index_pass) +{ + Int i; + assert(rightCorner <= rightEnd); + for(i=rightCorner; i<= rightEnd; i++) + if(rightChain->getVertex(i)[0] <= u) + break; + + + + ret_index_pass = i; + + if(ret_index_pass <= rightEnd) + { + for(i=ret_index_pass; i< rightEnd; i++) + { + if(rightChain->getVertex(i+1)[0] >= rightChain->getVertex(i)[0]) + break; + } + ret_index_mono = i; + } +} + + +void sampleBotRightWithGridLinePost(Real* botVertex, + vertexArray* rightChain, + Int rightEnd, + Int segIndexMono, + Int segIndexPass, + Int rightCorner, + gridWrap* grid, + Int gridV, + Int leftU, + Int rightU, + primStream* pStream) +{ + //the possible section which is to the right of rightU + if(segIndexPass > rightCorner) //from corner to pass-1 is > u. + { + Real *tempBot; + if(segIndexPass <= rightEnd) //there is a point to the left of u + tempBot = rightChain->getVertex(segIndexPass); + else //nothing is to the left of u. + tempBot = botVertex; + Real tempTop[2]; + tempTop[0] = grid->get_u_value(rightU); + tempTop[1] = grid->get_v_value(gridV); + + monoTriangulation2(tempTop, tempBot, + rightChain, + rightCorner, + segIndexPass-1, + 0, // a decrease chain + pStream); + } + + //the possible section which is strictly Umonotone + if(segIndexPass <= rightEnd) //segIndex pass and mono exist + { + //if there are grid points which are to the left of botVertex + //then we should use botVertex to form a fan with these points to + //optimize the triangulation + int do_optimize = 1; + if(botVertex[0] <= grid->get_u_value(leftU)) + do_optimize = 0; + else + { + //we also have to make sure that botVertex is the left most vertex on the chain + int i; + for(i=segIndexMono; i<=rightEnd; i++) + if(rightChain->getVertex(i)[0] <= botVertex[0]) + { + do_optimize = 0; + break; + } + } + + if(do_optimize) + { + //find midU so that grid->get_u_value(midU) <= botVertex[0] + //and grid->get_u_value(midU) > botVertex[0] + int midU = leftU; + while(grid->get_u_value(midU) <= botVertex[0]) + { + midU++; + if(midU > rightU) + break; + } + midU--; + + grid->outputFanWithPoint(gridV, leftU, midU, botVertex, pStream); + stripOfFanRight(rightChain, segIndexMono, segIndexPass, grid, gridV, midU, rightU, pStream, 1); + Real tempTop[2]; + tempTop[0] = grid->get_u_value(midU); + tempTop[1] = grid->get_v_value(gridV); + monoTriangulation2(tempTop, botVertex, rightChain, segIndexMono, rightEnd, 0, pStream); + } + else //not optimize + { + stripOfFanRight(rightChain, segIndexMono, segIndexPass, grid, gridV, leftU, rightU, pStream, 1); + Real tempTop[2]; + tempTop[0] = grid->get_u_value(leftU); + tempTop[1] = grid->get_v_value(gridV); + monoTriangulation2(tempTop, botVertex, rightChain, segIndexMono, rightEnd, 0, pStream); + } + } + else //the botVertex forms a fan witht eh grid points + grid->outputFanWithPoint(gridV, leftU, rightU, botVertex, pStream); +} + +void sampleBotRightWithGridLine(Real* botVertex, + vertexArray* rightChain, + Int rightEnd, + Int rightCorner, + gridWrap* grid, + Int gridV, + Int leftU, + Int rightU, + primStream* pStream) +{ + //if right chaain is empty, then there is only one bot vertex with + //one grid line + if(rightEnd<rightCorner){ + grid->outputFanWithPoint(gridV, leftU, rightU, botVertex, pStream); + return; + } + + Int segIndexMono, segIndexPass; + findBotRightSegment(rightChain, + rightEnd, + rightCorner, + grid->get_u_value(rightU), + segIndexMono, + segIndexPass); + + sampleBotRightWithGridLinePost(botVertex, + rightChain, + rightEnd, + segIndexMono, + segIndexPass, + rightCorner, + grid, + gridV, + leftU, + rightU, + pStream); +} + + +void sampleBotLeftWithGridLinePost(Real* botVertex, + vertexArray* leftChain, + Int leftEnd, + Int segIndexMono, + Int segIndexPass, + Int leftCorner, + gridWrap* grid, + Int gridV, + Int leftU, + Int rightU, + primStream* pStream) +{ + + //the possible section which is to the left of leftU + if(segIndexPass > leftCorner) //at least leftCorner is to the left of leftU + { + Real *tempBot; + if(segIndexPass <= leftEnd) //from corner to pass-1 is <u + tempBot = leftChain->getVertex(segIndexPass); + else //nothing is to the rigth of u + tempBot = botVertex; + Real tempTop[2]; + tempTop[0] = grid->get_u_value(leftU); + tempTop[1] = grid->get_v_value(gridV); + monoTriangulation2(tempTop, tempBot, leftChain, leftCorner, segIndexPass-1, + 1, //a increase chain, + pStream); + } + //the possible section which is strictly Umonotone + if(segIndexPass <= leftEnd) //segIndexpass and mono exist + { + stripOfFanLeft(leftChain, segIndexMono, segIndexPass, grid, gridV, leftU, rightU, pStream, 1); + Real tempTop[2]; + tempTop[0] = grid->get_u_value(rightU); + tempTop[1] = grid->get_v_value(gridV); + + monoTriangulation2(tempTop, botVertex, leftChain, segIndexMono, leftEnd, + 1, //increase chain + pStream); + } + else //the botVertex forms a fan with the grid points + { + grid->outputFanWithPoint(gridV, leftU, rightU, botVertex, pStream); + } + +} + +void sampleBotLeftWithGridLine(Real* botVertex, + vertexArray* leftChain, + Int leftEnd, + Int leftCorner, + gridWrap* grid, + Int gridV, + Int leftU, + Int rightU, + primStream* pStream) +{ + + //if leftChain is empty, then there is only one botVertex with one grid line + if(leftEnd< leftCorner){ + grid->outputFanWithPoint(gridV, leftU, rightU, botVertex, pStream); + return; + } + + Int segIndexPass, segIndexMono; + findBotLeftSegment(leftChain, leftEnd, leftCorner, grid->get_u_value(leftU), segIndexMono, segIndexPass); + + sampleBotLeftWithGridLinePost(botVertex, + leftChain, + leftEnd, + segIndexMono, + segIndexPass, + leftCorner, + grid, + gridV, + leftU, rightU, pStream); +} + +//return 1 if separator exists, 0 otherwise +Int findBotSeparator(vertexArray* leftChain, + Int leftEnd, + Int leftCorner, + vertexArray* rightChain, + Int rightEnd, + Int rightCorner, + Int& ret_sep_left, + Int& ret_sep_right) +{ + Int oldLeftI, oldRightI, newLeftI, newRightI; + Int i,j,k; + Real leftMax /*= leftChain->getVertex(leftCorner)[0]*/; + Real rightMin /*= rightChain->getVertex(rightCorner)[0]*/; + if(leftChain->getVertex(leftCorner)[1] < rightChain->getVertex(rightCorner)[1])//leftlower + { + oldLeftI = leftCorner-1; + oldRightI = rightCorner; + leftMax = leftChain->getVertex(leftCorner)[0] - Real(1.0) ; //initilize to be left of leftCorner + rightMin = rightChain->getVertex(rightCorner)[0]; + } + else //rightlower + { + oldLeftI = leftCorner; + oldRightI = rightCorner-1; + leftMax = leftChain->getVertex(leftCorner)[0]; + rightMin = rightChain->getVertex(rightCorner)[0] + Real(1.0); + } + + //i: the current working leftChain Index + //j: the curent working right chian index + //if(left(i) is lower than right(j), then the two chains above right(j) are separated. + //else the two chains below left(i) are separated. + i = leftCorner; + j = rightCorner; + while(1) + { + newLeftI = oldLeftI; + newRightI = oldRightI; + if(i> leftEnd) //left chain is doen , go through remaining right chain + { + for(k=j+1; k<= rightEnd; k++) + { + if(rightChain->getVertex(k)[0] > leftMax) //no conflict + { + //update oldRightI if necessary + if(rightChain->getVertex(k)[0] < rightMin) + { + rightMin = rightChain->getVertex(k)[0]; + oldRightI = k; + } + } + else //there is a conflict + break; //the for-loop, above right(k+1) is separated: oldLeftI, oldRightI + } + break; //the while loop + } + else if(j > rightEnd) //right Chain is doen + { + for(k=i+1; k<= leftEnd; k++) + { + if(leftChain->getVertex(k)[0] < rightMin) //no conflict + { + //update oldLeftI if necessary + if(leftChain->getVertex(k)[0] > leftMax) + { + leftMax = leftChain->getVertex(k)[0]; + oldLeftI = k; + } + } + else //there is a conflict + break; //the for-loop, above left(k+1) is separated: oldLeftI, oldRightI + } + break; //the while loop + } + else if(leftChain->getVertex(i)[1] < rightChain->getVertex(j)[1]) //left lower + { + + if(leftChain->getVertex(i)[0] > leftMax) //update leftMax amd newLeftI + { + leftMax = leftChain->getVertex(i)[0]; + newLeftI = i; + } + for(k=j+1; k<= rightEnd; k++) //update rightMin and newRightI; + { + if(rightChain->getVertex(k)[1] < leftChain->getVertex(i)[1]) //right gets lower + break; + if(rightChain->getVertex(k)[0] < rightMin) + { + rightMin = rightChain->getVertex(k)[0]; + newRightI = k; + } + } + j = k; //next working j, since j will he lower than i in next loop + if(leftMax >= rightMin) //there is a conflict + break; + else //still no conflict + { + oldLeftI = newLeftI; + oldRightI = newRightI; + + } + } + else //right lower + { + if(rightChain->getVertex(j)[0] < rightMin) + { + rightMin = rightChain->getVertex(j)[0]; + newRightI = j; + } + for(k=i+1; k<= leftEnd; k++) + { + if(leftChain->getVertex(k)[1] < rightChain->getVertex(j)[1]) + break; + if(leftChain->getVertex(k)[0] > leftMax) + { + leftMax = leftChain->getVertex(k)[0]; + newLeftI = k; + } + } + i=k; //nexct working i, since i will be lower than j next loop + if(leftMax >= rightMin) //there is conflict + break; + else //still no conflict + { + oldLeftI = newLeftI; + oldRightI = newRightI; + } + } + }//end of while loop + //now oldLeftI and oldRight I are the desired separator index notice that they are not + //necessarily valid + if(oldLeftI < leftCorner || oldRightI < rightCorner) + return 0; //no separator + else + { + ret_sep_left = oldLeftI; + ret_sep_right = oldRightI; + return 1; + } +} + +void sampleCompBot(Real* botVertex, + vertexArray* leftChain, + Int leftEnd, + vertexArray* rightChain, + Int rightEnd, + gridBoundaryChain* leftGridChain, + gridBoundaryChain* rightGridChain, + Int gridIndex, + Int down_leftCornerWhere, + Int down_leftCornerIndex, + Int down_rightCornerWhere, + Int down_rightCornerIndex, + primStream* pStream) +{ + + if(down_leftCornerWhere == 1 && down_rightCornerWhere == 1) //the bot is botVertex with possible grid points + { + + leftGridChain->getGrid()->outputFanWithPoint(leftGridChain->getVlineIndex(gridIndex), + leftGridChain->getUlineIndex(gridIndex), + rightGridChain->getUlineIndex(gridIndex), + botVertex, + pStream); + return; + } + else if(down_leftCornerWhere != 0) + { + + Real* tempBot; + Int tempRightEnd; + if(down_leftCornerWhere == 1){ + tempRightEnd = rightEnd; + tempBot = botVertex; + } + else + { + tempRightEnd = down_leftCornerIndex-1; + tempBot = rightChain->getVertex(down_leftCornerIndex); + } + + sampleBotRightWithGridLine(tempBot, + rightChain, + tempRightEnd, + down_rightCornerIndex, + rightGridChain->getGrid(), + leftGridChain->getVlineIndex(gridIndex), + leftGridChain->getUlineIndex(gridIndex), + rightGridChain->getUlineIndex(gridIndex), + pStream); + } + else if(down_rightCornerWhere != 2) + { + + Real* tempBot; + Int tempLeftEnd; + if(down_rightCornerWhere == 1){ + tempLeftEnd = leftEnd; + tempBot = botVertex; + } + else //right corner is on left chain + { + tempLeftEnd = down_rightCornerIndex-1; + tempBot = leftChain->getVertex(down_rightCornerIndex); + } + + + sampleBotLeftWithGridLine(tempBot, leftChain, tempLeftEnd, down_leftCornerIndex, + leftGridChain->getGrid(), + leftGridChain->getVlineIndex(gridIndex), + leftGridChain->getUlineIndex(gridIndex), + rightGridChain->getUlineIndex(gridIndex), + pStream); + + } + else //down_leftCornereWhere == 0, down_rightCornerwhere == 2 + { + sampleCompBotSimple(botVertex, + leftChain, + leftEnd, + rightChain, + rightEnd, + leftGridChain, + rightGridChain, + gridIndex, + down_leftCornerWhere, + down_leftCornerIndex, + down_rightCornerWhere, + down_rightCornerIndex, + pStream); + + return; + +#ifdef NOT_REACHABLE + //the following code is trying to do some optimization, but not quite working. so it is not reachable, but leave it here for reference + Int sep_left, sep_right; + if(findBotSeparator(leftChain, leftEnd, down_leftCornerIndex, + rightChain, rightEnd, down_rightCornerIndex, + sep_left, sep_right) + )//separator exiosts + { + + if(leftChain->getVertex(sep_left)[0] >= leftGridChain->get_u_value(gridIndex) && + rightChain->getVertex(sep_right)[0] <= rightGridChain->get_u_value(gridIndex)) + { + Int gridSep; + Int segLeftMono, segLeftPass, segRightMono, segRightPass; + findBotLeftSegment(leftChain, + sep_left, + down_leftCornerIndex, + leftGridChain->get_u_value(gridIndex), + segLeftMono, + segLeftPass); + findBotRightSegment(rightChain, + sep_right, + down_rightCornerIndex, + rightGridChain->get_u_value(gridIndex), + segRightMono, + segRightPass); + if(leftChain->getVertex(segLeftMono)[1] <= rightChain->getVertex(segRightMono)[1]) + { + gridSep = rightGridChain->getUlineIndex(gridIndex); + while(leftGridChain->getGrid()->get_u_value(gridSep) > leftChain->getVertex(segLeftMono)[0]) + gridSep--; + } + else + { + gridSep = leftGridChain->getUlineIndex(gridIndex); + while(leftGridChain->getGrid()->get_u_value(gridSep) < rightChain->getVertex(segRightMono)[0]) + gridSep++; + } + + sampleBotLeftWithGridLinePost(leftChain->getVertex(segLeftMono), + leftChain, + segLeftMono-1, + segLeftMono-1, + segLeftPass, + down_leftCornerIndex, + leftGridChain->getGrid(), + leftGridChain->getVlineIndex(gridIndex), + leftGridChain->getUlineIndex(gridIndex), + gridSep, + pStream); + sampleBotRightWithGridLinePost(rightChain->getVertex(segRightMono), + rightChain, + segRightMono-1, + segRightMono-1, + segRightPass, + down_rightCornerIndex, + rightGridChain->getGrid(), + rightGridChain->getVlineIndex(gridIndex), + gridSep, + rightGridChain->getUlineIndex(gridIndex), + pStream); + Real tempTop[2]; + tempTop[0] = leftGridChain->getGrid()->get_u_value(gridSep); + tempTop[1] = leftGridChain->get_v_value(gridIndex); + monoTriangulationRecGen(tempTop, botVertex, + leftChain, segLeftMono, leftEnd, + rightChain, segRightMono, rightEnd, + pStream); + }//end if both sides have vertices inside the gridboundary points + else if(leftChain->getVertex(sep_left)[0] >= leftGridChain->get_u_value(gridIndex)) //left n right out + + { + Int segLeftMono, segLeftPass; + findBotLeftSegment(leftChain, + sep_left, + down_leftCornerIndex, + leftGridChain->get_u_value(gridIndex), + segLeftMono, + segLeftPass); + assert(segLeftPass <= sep_left); //make sure there is a point to the right of u. + monoTriangulation2(leftGridChain->get_vertex(gridIndex), + leftChain->getVertex(segLeftPass), + leftChain, + down_leftCornerIndex, + segLeftPass-1, + 1, //a increase chain + pStream); + stripOfFanLeft(leftChain, segLeftMono, segLeftPass, + leftGridChain->getGrid(), + leftGridChain->getVlineIndex(gridIndex), + leftGridChain->getUlineIndex(gridIndex), + rightGridChain->getUlineIndex(gridIndex), + pStream,1 ); +/* + sampleBotLeftWithGridLinePost(leftChain->getVertex(segLeftMono), + leftChain, + segLeftMono-1, + segLeftMono-1, + segLeftPass, + down_leftCornerIndex, + leftGridChain->getGrid(), + leftGridChain->getVlineIndex(gridIndex), + leftGridChain->getUlineIndex(gridIndex), + rightGridChain->getUlineIndex(gridIndex), + pStream); +*/ + + monoTriangulationRecGen(rightGridChain->get_vertex(gridIndex), + botVertex, + leftChain, segLeftMono, leftEnd, + rightChain, down_rightCornerIndex, rightEnd, + pStream); + }//end left in right out + else if(rightChain->getVertex(sep_right)[0] <= rightGridChain->get_u_value(gridIndex))//left out right in + { + Int segRightMono, segRightPass; + findBotRightSegment(rightChain, sep_right, down_rightCornerIndex, + rightGridChain->get_u_value(gridIndex), + segRightMono, + segRightPass); + + assert(segRightPass <= sep_right); //make sure there is a point to the left of u. + monoTriangulation2(rightGridChain->get_vertex(gridIndex), + rightChain->getVertex(segRightPass), + rightChain, + down_rightCornerIndex, + segRightPass-1, + 0, // a decrease chain + pStream); + + stripOfFanRight(rightChain, segRightMono, segRightPass, + rightGridChain->getGrid(), + rightGridChain->getVlineIndex(gridIndex), + leftGridChain->getUlineIndex(gridIndex), + rightGridChain->getUlineIndex(gridIndex), + pStream, 1); + + + monoTriangulationRecGen(leftGridChain->get_vertex(gridIndex), + botVertex, + leftChain, down_leftCornerIndex, leftEnd, + rightChain, segRightMono, rightEnd, + pStream); + + }//end left out right in + else //left out, right out + { + sampleCompBotSimple(botVertex, + leftChain, + leftEnd, + rightChain, + rightEnd, + leftGridChain, + rightGridChain, + gridIndex, + down_leftCornerWhere, + down_leftCornerIndex, + down_rightCornerWhere, + down_rightCornerIndex, + pStream); + + }//end leftout right out + }//end if separator exists + else //no separator + { + + sampleCompBotSimple(botVertex, + leftChain, + leftEnd, + rightChain, + rightEnd, + leftGridChain, + rightGridChain, + gridIndex, + down_leftCornerWhere, + down_leftCornerIndex, + down_rightCornerWhere, + down_rightCornerIndex, + pStream); + } +#endif + }//end id 0 2 +}//end if the functin + + +void sampleCompBotSimple(Real* botVertex, + vertexArray* leftChain, + Int leftEnd, + vertexArray* rightChain, + Int rightEnd, + gridBoundaryChain* leftGridChain, + gridBoundaryChain* rightGridChain, + Int gridIndex, + Int down_leftCornerWhere, + Int down_leftCornerIndex, + Int down_rightCornerWhere, + Int down_rightCornerIndex, + primStream* pStream) +{ + //the plan is to use monotriangulation algorithm. + Int i,k; + Real* ActualTop; + Real* ActualBot; + Int ActualLeftStart, ActualLeftEnd; + Int ActualRightStart, ActualRightEnd; + + //creat an array to store the points on the grid line + gridWrap* grid = leftGridChain->getGrid(); + Int gridV = leftGridChain->getVlineIndex(gridIndex); + Int gridLeftU = leftGridChain->getUlineIndex(gridIndex); + Int gridRightU = rightGridChain->getUlineIndex(gridIndex); + Real2* gridPoints = (Real2*) malloc(sizeof(Real2) * (gridRightU - gridLeftU +1)); + assert(gridPoints); + + for(k=0, i=gridRightU; i>= gridLeftU; i--, k++) + { + gridPoints[k][0] = grid->get_u_value(i); + gridPoints[k][1] = grid->get_v_value(gridV); + } + + if(down_rightCornerWhere != 0) //rightCorner is not on lef + ActualLeftEnd = leftEnd; + else + ActualLeftEnd = down_rightCornerIndex-1; //down_rightCornerIndex will be th actualBot + + if(down_leftCornerWhere != 0) //left corner is not on let chian + ActualLeftStart = leftEnd+1; //meaning that there is no actual left section + else + ActualLeftStart = down_leftCornerIndex; + + vertexArray ActualLeftChain(max(0, ActualLeftEnd - ActualLeftStart +1) + gridRightU - gridLeftU +1); + + for(i=0; i<gridRightU - gridLeftU +1 ; i++) + ActualLeftChain.appendVertex(gridPoints[i]); + for(i=ActualLeftStart; i<= ActualLeftEnd; i++) + ActualLeftChain.appendVertex(leftChain->getVertex(i)); + + //determine ActualRightStart + if(down_rightCornerWhere != 2) //right is not on right + ActualRightStart = rightEnd +1; //meaning no section on right + else + ActualRightStart = down_rightCornerIndex; + + //determine actualrightEnd + if(down_leftCornerWhere != 2) //left is not on right + { + + ActualRightEnd = rightEnd; + } + else //left corner is on right + { + ActualRightEnd = down_leftCornerIndex-1; //down_leftCornerIndex will be the bot + + } + + //actual bot + if(down_rightCornerWhere == 2) + { + if(down_leftCornerWhere == 2) + ActualBot = rightChain->getVertex(down_leftCornerIndex); + else + ActualBot = botVertex; + } + else if(down_rightCornerWhere == 1) //right corner bot + ActualBot = botVertex; + else //down_rightCornerWhere == 0 + ActualBot = leftChain->getVertex(down_rightCornerIndex); + + ActualTop = gridPoints[0]; +/* +printf("in bot simple, actual leftChain is \n"); +ActualLeftChain.print(); +printf("Actual Top = %f,%f\n", ActualTop[0],ActualTop[1]); +printf("Actual Bot = %f,%f\n", ActualBot[0],ActualBot[1]); +printf("Actual right start = %i, end=%i\n",ActualRightStart, ActualRightEnd); +*/ + if(rightChain->getVertex(ActualRightStart)[1] == ActualTop[1]) + monoTriangulationRecGenOpt(rightChain->getVertex(ActualRightStart), + ActualBot, + &ActualLeftChain, + 0, + ActualLeftChain.getNumElements()-1, + rightChain, + ActualRightStart+1, + ActualRightEnd, + pStream); + else + monoTriangulationRecGenOpt(ActualTop, ActualBot, + &ActualLeftChain, + 1, //the first one is the top vertex + ActualLeftChain.getNumElements()-1, + rightChain, + ActualRightStart, + ActualRightEnd, + pStream); + free(gridPoints); +} + + + + |