diff options
Diffstat (limited to 'mesalib/src/mesa/drivers/dri/common/xmlpool')
3 files changed, 292 insertions, 287 deletions
diff --git a/mesalib/src/mesa/drivers/dri/common/xmlpool/.gitignore b/mesalib/src/mesa/drivers/dri/common/xmlpool/.gitignore new file mode 100644 index 000000000..a5a437849 --- /dev/null +++ b/mesalib/src/mesa/drivers/dri/common/xmlpool/.gitignore @@ -0,0 +1,5 @@ +de +es +fr +nl +sv diff --git a/mesalib/src/mesa/drivers/dri/common/xmlpool/Makefile b/mesalib/src/mesa/drivers/dri/common/xmlpool/Makefile index ae3d89938..b71629e9f 100644 --- a/mesalib/src/mesa/drivers/dri/common/xmlpool/Makefile +++ b/mesalib/src/mesa/drivers/dri/common/xmlpool/Makefile @@ -1,96 +1,96 @@ -# Convenient makefile for managing translations.
-
-# Prerequisites:
-# - GNU gettext
-# - Python
-
-# Adding new translations
-# -----------------------
-
-# To start working on a new translation edit the POS=... line
-# below. If you want to add for example a french translation, add
-# fr.po.
-
-# Then run "make po" to generate a fresh .po file from translatable
-# strings in t_options.h. Now you can edit the new .po file (fr.po in
-# the example above) to translate the strings. Please make sure that
-# your editor encodes the file in UTF-8.
-
-# Updating existing translations
-# ------------------------------
-
-# Run "make po" to update .po files with new translatable strings from
-# t_options.h. Now you can edit the .po files you're interested
-# in. Please make sure that your editor encodes the file in UTF-8.
-
-# Updating options.h
-# ------------------
-
-# Finally run "make" to generate options.h from t_options.h with all
-# translations. Now you can rebuild the drivers. Any common options
-# used by the drivers will have option descriptions with the latest
-# translations.
-
-# Publishing translations
-# -----------------------
-
-# To get your translation(s) into Mesa CVS, please send me your
-# <lang>.po file.
-
-# More information:
-# - info gettext
-
-# The set of supported languages. Add languages as needed.
-POS=de.po es.po nl.po fr.po sv.po
-
-#
-# Don't change anything below, unless you know what you're doing.
-#
-LANGS=$(POS:%.po=%)
-MOS=$(POS:%.po=%/LC_MESSAGES/options.mo)
-POT=xmlpool.pot
-
-.PHONY: all clean pot po mo
-
-all: options.h
-
-# Only intermediate files are cleaned up. options.h is not deleted because
-# it's in CVS.
-clean:
- -rm -f $(POT) *~
- -rm -rf $(LANGS)
-
-# Default target options.h
-options.h: t_options.h mo
- $(PYTHON2) $(PYTHON_FLAGS) gen_xmlpool.py $(LANGS) > options.h
-
-# Update .mo files from the corresponding .po files.
-mo:
- @for mo in $(MOS); do \
- lang=$${mo%%/*}; \
- echo "Updating $$mo from $$lang.po."; \
- mkdir -p $${mo%/*}; \
- msgfmt -o $$mo $$lang.po; \
- done
-
-# Use this target to create or update .po files with new messages in
-# driconf.py.
-po: $(POS)
-
-pot: $(POT)
-
-# Extract message catalog from driconf.py.
-$(POT): t_options.h
- xgettext -L C --from-code utf-8 -o $(POT) t_options.h
-
-# Create or update a .po file for a specific language.
-%.po: $(POT)
- @if [ -f $@ ]; then \
- echo "Merging new strings from $(POT) into $@."; \
- mv $@ $@~; \
- msgmerge -o $@ $@~ $(POT); \
- else \
- echo "Initializing $@ from $(POT)."; \
- msginit -i $(POT) -o $@~ --locale=$*; \
- sed -e 's/charset=.*\\n/charset=UTF-8\\n/' $@~ > $@; \
- fi
+# Convenient makefile for managing translations. + +# Prerequisites: +# - GNU gettext +# - Python + +# Adding new translations +# ----------------------- + +# To start working on a new translation edit the POS=... line +# below. If you want to add for example a french translation, add +# fr.po. + +# Then run "make po" to generate a fresh .po file from translatable +# strings in t_options.h. Now you can edit the new .po file (fr.po in +# the example above) to translate the strings. Please make sure that +# your editor encodes the file in UTF-8. + +# Updating existing translations +# ------------------------------ + +# Run "make po" to update .po files with new translatable strings from +# t_options.h. Now you can edit the .po files you're interested +# in. Please make sure that your editor encodes the file in UTF-8. + +# Updating options.h +# ------------------ + +# Finally run "make" to generate options.h from t_options.h with all +# translations. Now you can rebuild the drivers. Any common options +# used by the drivers will have option descriptions with the latest +# translations. + +# Publishing translations +# ----------------------- + +# To get your translation(s) into Mesa CVS, please send me your +# <lang>.po file. + +# More information: +# - info gettext + +# The set of supported languages. Add languages as needed. +POS=de.po es.po nl.po fr.po sv.po + +# +# Don't change anything below, unless you know what you're doing. +# +LANGS=$(POS:%.po=%) +MOS=$(POS:%.po=%/LC_MESSAGES/options.mo) +POT=xmlpool.pot + +.PHONY: all clean pot po mo + +all: options.h + +# Only intermediate files are cleaned up. options.h is not deleted because +# it's in CVS. +clean: + -rm -f $(POT) *~ + -rm -rf $(LANGS) + +# Default target options.h +options.h: t_options.h mo + $(PYTHON2) $(PYTHON_FLAGS) gen_xmlpool.py $(LANGS) > options.h + +# Update .mo files from the corresponding .po files. +mo: + @for mo in $(MOS); do \ + lang=$${mo%%/*}; \ + echo "Updating $$mo from $$lang.po."; \ + mkdir -p $${mo%/*}; \ + msgfmt -o $$mo $$lang.po; \ + done + +# Use this target to create or update .po files with new messages in +# driconf.py. +po: $(POS) + +pot: $(POT) + +# Extract message catalog from driconf.py. +$(POT): t_options.h + xgettext -L C --from-code utf-8 -o $(POT) t_options.h + +# Create or update a .po file for a specific language. +%.po: $(POT) + @if [ -f $@ ]; then \ + echo "Merging new strings from $(POT) into $@."; \ + mv $@ $@~; \ + msgmerge -o $@ $@~ $(POT); \ + else \ + echo "Initializing $@ from $(POT)."; \ + msginit -i $(POT) -o $@~ --locale=$*; \ + sed -e 's/charset=.*\\n/charset=UTF-8\\n/' $@~ > $@; \ + fi diff --git a/mesalib/src/mesa/drivers/dri/common/xmlpool/gen_xmlpool.py b/mesalib/src/mesa/drivers/dri/common/xmlpool/gen_xmlpool.py index f5ac5e25b..7398c4cd0 100644 --- a/mesalib/src/mesa/drivers/dri/common/xmlpool/gen_xmlpool.py +++ b/mesalib/src/mesa/drivers/dri/common/xmlpool/gen_xmlpool.py @@ -1,191 +1,191 @@ -#!/usr/bin/python
-
-import sys
-import gettext
-import re
-
-# List of supported languages
-languages = sys.argv[1:]
-
-# Escape special characters in C strings
-def escapeCString (s):
- escapeSeqs = {'\a' : '\\a', '\b' : '\\b', '\f' : '\\f', '\n' : '\\n',
- '\r' : '\\r', '\t' : '\\t', '\v' : '\\v', '\\' : '\\\\'}
- # " -> '' is a hack. Quotes (") aren't possible in XML attributes.
- # Better use Unicode characters for typographic quotes in option
- # descriptions and translations.
- i = 0
- r = ''
- while i < len(s):
- # Special case: escape double quote with \u201c or \u201d, depending
- # on whether it's an open or close quote. This is needed because plain
- # double quotes are not possible in XML attributes.
- if s[i] == '"':
- if i == len(s)-1 or s[i+1].isspace():
- # close quote
- q = u'\u201c'
- else:
- # open quote
- q = u'\u201d'
- r = r + q
- elif escapeSeqs.has_key(s[i]):
- r = r + escapeSeqs[s[i]]
- else:
- r = r + s[i]
- i = i + 1
- return r
-
-# Expand escape sequences in C strings (needed for gettext lookup)
-def expandCString (s):
- escapeSeqs = {'a' : '\a', 'b' : '\b', 'f' : '\f', 'n' : '\n',
- 'r' : '\r', 't' : '\t', 'v' : '\v',
- '"' : '"', '\\' : '\\'}
- i = 0
- escape = False
- hexa = False
- octa = False
- num = 0
- digits = 0
- r = ''
- while i < len(s):
- if not escape:
- if s[i] == '\\':
- escape = True
- else:
- r = r + s[i]
- elif hexa:
- if (s[i] >= '0' and s[i] <= '9') or \
- (s[i] >= 'a' and s[i] <= 'f') or \
- (s[i] >= 'A' and s[i] <= 'F'):
- num = num * 16 + int(s[i],16)
- digits = digits + 1
- else:
- digits = 2
- if digits >= 2:
- hexa = False
- escape = False
- r = r + chr(num)
- elif octa:
- if s[i] >= '0' and s[i] <= '7':
- num = num * 8 + int(s[i],8)
- digits = digits + 1
- else:
- digits = 3
- if digits >= 3:
- octa = False
- escape = False
- r = r + chr(num)
- else:
- if escapeSeqs.has_key(s[i]):
- r = r + escapeSeqs[s[i]]
- escape = False
- elif s[i] >= '0' and s[i] <= '7':
- octa = True
- num = int(s[i],8)
- if num <= 3:
- digits = 1
- else:
- digits = 2
- elif s[i] == 'x' or s[i] == 'X':
- hexa = True
- num = 0
- digits = 0
- else:
- r = r + s[i]
- escape = False
- i = i + 1
- return r
-
-# Expand matches. The first match is always a DESC or DESC_BEGIN match.
-# Subsequent matches are ENUM matches.
-#
-# DESC, DESC_BEGIN format: \1 \2=<lang> \3 \4=gettext(" \5=<text> \6=") \7
-# ENUM format: \1 \2=gettext(" \3=<text> \4=") \5
-def expandMatches (matches, translations, end=None):
- assert len(matches) > 0
- nTranslations = len(translations)
- i = 0
- # Expand the description+enums for all translations
- for lang,trans in translations:
- i = i + 1
- # Make sure that all but the last line of a simple description
- # are extended with a backslash.
- suffix = ''
- if len(matches) == 1 and i < len(translations) and \
- not matches[0].expand (r'\7').endswith('\\'):
- suffix = ' \\'
- # Expand the description line. Need to use ugettext in order to allow
- # non-ascii unicode chars in the original English descriptions.
- text = escapeCString (trans.ugettext (unicode (expandCString (
- matches[0].expand (r'\5')), "utf-8"))).encode("utf-8")
- print matches[0].expand (r'\1' + lang + r'\3"' + text + r'"\7') + suffix
- # Expand any subsequent enum lines
- for match in matches[1:]:
- text = escapeCString (trans.ugettext (unicode (expandCString (
- match.expand (r'\3')), "utf-8"))).encode("utf-8")
- print match.expand (r'\1"' + text + r'"\5')
-
- # Expand description end
- if end:
- print end,
-
-# Compile a list of translation classes to all supported languages.
-# The first translation is always a NullTranslations.
-translations = [("en", gettext.NullTranslations())]
-for lang in languages:
- try:
- trans = gettext.translation ("options", ".", [lang])
- except IOError:
- sys.stderr.write ("Warning: language '%s' not found.\n" % lang)
- continue
- translations.append ((lang, trans))
-
-# Regular expressions:
-reLibintl_h = re.compile (r'#\s*include\s*<libintl.h>')
-reDESC = re.compile (r'(\s*DRI_CONF_DESC\s*\(\s*)([a-z]+)(\s*,\s*)(gettext\s*\(\s*")(.*)("\s*\))(\s*\)[ \t]*\\?)$')
-reDESC_BEGIN = re.compile (r'(\s*DRI_CONF_DESC_BEGIN\s*\(\s*)([a-z]+)(\s*,\s*)(gettext\s*\(\s*")(.*)("\s*\))(\s*\)[ \t]*\\?)$')
-reENUM = re.compile (r'(\s*DRI_CONF_ENUM\s*\([^,]+,\s*)(gettext\s*\(\s*")(.*)("\s*\))(\s*\)[ \t]*\\?)$')
-reDESC_END = re.compile (r'\s*DRI_CONF_DESC_END')
-
-# Print a header
-print \
-"/***********************************************************************\n" \
-" *** THIS FILE IS GENERATED AUTOMATICALLY. DON'T EDIT! ***\n" \
-" ***********************************************************************/"
-
-# Process the options template and generate options.h with all
-# translations.
-template = file ("t_options.h", "r")
-descMatches = []
-for line in template:
- if len(descMatches) > 0:
- matchENUM = reENUM .match (line)
- matchDESC_END = reDESC_END.match (line)
- if matchENUM:
- descMatches.append (matchENUM)
- elif matchDESC_END:
- expandMatches (descMatches, translations, line)
- descMatches = []
- else:
- sys.stderr.write (
- "Warning: unexpected line inside description dropped:\n%s\n" \
- % line)
- continue
- if reLibintl_h.search (line):
- # Ignore (comment out) #include <libintl.h>
- print "/* %s * commented out by gen_xmlpool.py */" % line
- continue
- matchDESC = reDESC .match (line)
- matchDESC_BEGIN = reDESC_BEGIN.match (line)
- if matchDESC:
- assert len(descMatches) == 0
- expandMatches ([matchDESC], translations)
- elif matchDESC_BEGIN:
- assert len(descMatches) == 0
- descMatches = [matchDESC_BEGIN]
- else:
- print line,
-
-if len(descMatches) > 0:
- sys.stderr.write ("Warning: unterminated description at end of file.\n")
- expandMatches (descMatches, translations)
+#!/usr/bin/python + +import sys +import gettext +import re + +# List of supported languages +languages = sys.argv[1:] + +# Escape special characters in C strings +def escapeCString (s): + escapeSeqs = {'\a' : '\\a', '\b' : '\\b', '\f' : '\\f', '\n' : '\\n', + '\r' : '\\r', '\t' : '\\t', '\v' : '\\v', '\\' : '\\\\'} + # " -> '' is a hack. Quotes (") aren't possible in XML attributes. + # Better use Unicode characters for typographic quotes in option + # descriptions and translations. + i = 0 + r = '' + while i < len(s): + # Special case: escape double quote with \u201c or \u201d, depending + # on whether it's an open or close quote. This is needed because plain + # double quotes are not possible in XML attributes. + if s[i] == '"': + if i == len(s)-1 or s[i+1].isspace(): + # close quote + q = u'\u201c' + else: + # open quote + q = u'\u201d' + r = r + q + elif escapeSeqs.has_key(s[i]): + r = r + escapeSeqs[s[i]] + else: + r = r + s[i] + i = i + 1 + return r + +# Expand escape sequences in C strings (needed for gettext lookup) +def expandCString (s): + escapeSeqs = {'a' : '\a', 'b' : '\b', 'f' : '\f', 'n' : '\n', + 'r' : '\r', 't' : '\t', 'v' : '\v', + '"' : '"', '\\' : '\\'} + i = 0 + escape = False + hexa = False + octa = False + num = 0 + digits = 0 + r = '' + while i < len(s): + if not escape: + if s[i] == '\\': + escape = True + else: + r = r + s[i] + elif hexa: + if (s[i] >= '0' and s[i] <= '9') or \ + (s[i] >= 'a' and s[i] <= 'f') or \ + (s[i] >= 'A' and s[i] <= 'F'): + num = num * 16 + int(s[i],16) + digits = digits + 1 + else: + digits = 2 + if digits >= 2: + hexa = False + escape = False + r = r + chr(num) + elif octa: + if s[i] >= '0' and s[i] <= '7': + num = num * 8 + int(s[i],8) + digits = digits + 1 + else: + digits = 3 + if digits >= 3: + octa = False + escape = False + r = r + chr(num) + else: + if escapeSeqs.has_key(s[i]): + r = r + escapeSeqs[s[i]] + escape = False + elif s[i] >= '0' and s[i] <= '7': + octa = True + num = int(s[i],8) + if num <= 3: + digits = 1 + else: + digits = 2 + elif s[i] == 'x' or s[i] == 'X': + hexa = True + num = 0 + digits = 0 + else: + r = r + s[i] + escape = False + i = i + 1 + return r + +# Expand matches. The first match is always a DESC or DESC_BEGIN match. +# Subsequent matches are ENUM matches. +# +# DESC, DESC_BEGIN format: \1 \2=<lang> \3 \4=gettext(" \5=<text> \6=") \7 +# ENUM format: \1 \2=gettext(" \3=<text> \4=") \5 +def expandMatches (matches, translations, end=None): + assert len(matches) > 0 + nTranslations = len(translations) + i = 0 + # Expand the description+enums for all translations + for lang,trans in translations: + i = i + 1 + # Make sure that all but the last line of a simple description + # are extended with a backslash. + suffix = '' + if len(matches) == 1 and i < len(translations) and \ + not matches[0].expand (r'\7').endswith('\\'): + suffix = ' \\' + # Expand the description line. Need to use ugettext in order to allow + # non-ascii unicode chars in the original English descriptions. + text = escapeCString (trans.ugettext (unicode (expandCString ( + matches[0].expand (r'\5')), "utf-8"))).encode("utf-8") + print matches[0].expand (r'\1' + lang + r'\3"' + text + r'"\7') + suffix + # Expand any subsequent enum lines + for match in matches[1:]: + text = escapeCString (trans.ugettext (unicode (expandCString ( + match.expand (r'\3')), "utf-8"))).encode("utf-8") + print match.expand (r'\1"' + text + r'"\5') + + # Expand description end + if end: + print end, + +# Compile a list of translation classes to all supported languages. +# The first translation is always a NullTranslations. +translations = [("en", gettext.NullTranslations())] +for lang in languages: + try: + trans = gettext.translation ("options", ".", [lang]) + except IOError: + sys.stderr.write ("Warning: language '%s' not found.\n" % lang) + continue + translations.append ((lang, trans)) + +# Regular expressions: +reLibintl_h = re.compile (r'#\s*include\s*<libintl.h>') +reDESC = re.compile (r'(\s*DRI_CONF_DESC\s*\(\s*)([a-z]+)(\s*,\s*)(gettext\s*\(\s*")(.*)("\s*\))(\s*\)[ \t]*\\?)$') +reDESC_BEGIN = re.compile (r'(\s*DRI_CONF_DESC_BEGIN\s*\(\s*)([a-z]+)(\s*,\s*)(gettext\s*\(\s*")(.*)("\s*\))(\s*\)[ \t]*\\?)$') +reENUM = re.compile (r'(\s*DRI_CONF_ENUM\s*\([^,]+,\s*)(gettext\s*\(\s*")(.*)("\s*\))(\s*\)[ \t]*\\?)$') +reDESC_END = re.compile (r'\s*DRI_CONF_DESC_END') + +# Print a header +print \ +"/***********************************************************************\n" \ +" *** THIS FILE IS GENERATED AUTOMATICALLY. DON'T EDIT! ***\n" \ +" ***********************************************************************/" + +# Process the options template and generate options.h with all +# translations. +template = file ("t_options.h", "r") +descMatches = [] +for line in template: + if len(descMatches) > 0: + matchENUM = reENUM .match (line) + matchDESC_END = reDESC_END.match (line) + if matchENUM: + descMatches.append (matchENUM) + elif matchDESC_END: + expandMatches (descMatches, translations, line) + descMatches = [] + else: + sys.stderr.write ( + "Warning: unexpected line inside description dropped:\n%s\n" \ + % line) + continue + if reLibintl_h.search (line): + # Ignore (comment out) #include <libintl.h> + print "/* %s * commented out by gen_xmlpool.py */" % line + continue + matchDESC = reDESC .match (line) + matchDESC_BEGIN = reDESC_BEGIN.match (line) + if matchDESC: + assert len(descMatches) == 0 + expandMatches ([matchDESC], translations) + elif matchDESC_BEGIN: + assert len(descMatches) == 0 + descMatches = [matchDESC_BEGIN] + else: + print line, + +if len(descMatches) > 0: + sys.stderr.write ("Warning: unterminated description at end of file.\n") + expandMatches (descMatches, translations) |