diff options
Diffstat (limited to 'mesalib/src/mesa/drivers/dri/common')
| -rw-r--r-- | mesalib/src/mesa/drivers/dri/common/dri_util.c | 2060 | ||||
| -rw-r--r-- | mesalib/src/mesa/drivers/dri/common/dri_util.h | 1126 | ||||
| -rw-r--r-- | mesalib/src/mesa/drivers/dri/common/utils.c | 1650 |
3 files changed, 2419 insertions, 2417 deletions
diff --git a/mesalib/src/mesa/drivers/dri/common/dri_util.c b/mesalib/src/mesa/drivers/dri/common/dri_util.c index 82638fa72..6d3dd0a2c 100644 --- a/mesalib/src/mesa/drivers/dri/common/dri_util.c +++ b/mesalib/src/mesa/drivers/dri/common/dri_util.c @@ -1,1030 +1,1030 @@ -/** - * \file dri_util.c - * DRI utility functions. - * - * This module acts as glue between GLX and the actual hardware driver. A DRI - * driver doesn't really \e have to use any of this - it's optional. But, some - * useful stuff is done here that otherwise would have to be duplicated in most - * drivers. - * - * Basically, these utility functions take care of some of the dirty details of - * screen initialization, context creation, context binding, DRM setup, etc. - * - * These functions are compiled into each DRI driver so libGL.so knows nothing - * about them. - */ - - -#include <assert.h> -#include <stdarg.h> -#include <unistd.h> -#include <sys/mman.h> -#include <stdio.h> - -#ifndef MAP_FAILED -#define MAP_FAILED ((void *)-1) -#endif - -#include "main/imports.h" -#define None 0 - -#include "dri_util.h" -#include "drm_sarea.h" -#include "utils.h" -#include "xmlpool.h" -#include "../glsl/glsl_parser_extras.h" - -PUBLIC const char __dri2ConfigOptions[] = - DRI_CONF_BEGIN - DRI_CONF_SECTION_PERFORMANCE - DRI_CONF_VBLANK_MODE(DRI_CONF_VBLANK_DEF_INTERVAL_1) - DRI_CONF_SECTION_END - DRI_CONF_END; - -static const uint __dri2NConfigOptions = 1; - -#ifndef GLX_OML_sync_control -typedef GLboolean ( * PFNGLXGETMSCRATEOMLPROC) (__DRIdrawable *drawable, int32_t *numerator, int32_t *denominator); -#endif - -static void dri_get_drawable(__DRIdrawable *pdp); -static void dri_put_drawable(__DRIdrawable *pdp); - -/** - * This is just a token extension used to signal that the driver - * supports setting a read drawable. - */ -const __DRIextension driReadDrawableExtension = { - __DRI_READ_DRAWABLE, __DRI_READ_DRAWABLE_VERSION -}; - -GLint -driIntersectArea( drm_clip_rect_t rect1, drm_clip_rect_t rect2 ) -{ - if (rect2.x1 > rect1.x1) rect1.x1 = rect2.x1; - if (rect2.x2 < rect1.x2) rect1.x2 = rect2.x2; - if (rect2.y1 > rect1.y1) rect1.y1 = rect2.y1; - if (rect2.y2 < rect1.y2) rect1.y2 = rect2.y2; - - if (rect1.x1 > rect1.x2 || rect1.y1 > rect1.y2) return 0; - - return (rect1.x2 - rect1.x1) * (rect1.y2 - rect1.y1); -} - -/*****************************************************************/ -/** \name Context (un)binding functions */ -/*****************************************************************/ -/*@{*/ - -/** - * Unbind context. - * - * \param scrn the screen. - * \param gc context. - * - * \return \c GL_TRUE on success, or \c GL_FALSE on failure. - * - * \internal - * This function calls __DriverAPIRec::UnbindContext, and then decrements - * __DRIdrawableRec::refcount which must be non-zero for a successful - * return. - * - * While casting the opaque private pointers associated with the parameters - * into their respective real types it also assures they are not \c NULL. - */ -static int driUnbindContext(__DRIcontext *pcp) -{ - __DRIscreen *psp; - __DRIdrawable *pdp; - __DRIdrawable *prp; - - /* - ** Assume error checking is done properly in glXMakeCurrent before - ** calling driUnbindContext. - */ - - if (pcp == NULL) - return GL_FALSE; - - psp = pcp->driScreenPriv; - pdp = pcp->driDrawablePriv; - prp = pcp->driReadablePriv; - - /* already unbound */ - if (!pdp && !prp) - return GL_TRUE; - /* Let driver unbind drawable from context */ - (*psp->DriverAPI.UnbindContext)(pcp); - - assert(pdp); - if (pdp->refcount == 0) { - /* ERROR!!! */ - return GL_FALSE; - } - - dri_put_drawable(pdp); - - if (prp != pdp) { - if (prp->refcount == 0) { - /* ERROR!!! */ - return GL_FALSE; - } - - dri_put_drawable(prp); - } - - - /* XXX this is disabled so that if we call SwapBuffers on an unbound - * window we can determine the last context bound to the window and - * use that context's lock. (BrianP, 2-Dec-2000) - */ - pcp->driDrawablePriv = pcp->driReadablePriv = NULL; - - return GL_TRUE; -} - -/** - * This function takes both a read buffer and a draw buffer. This is needed - * for \c glXMakeCurrentReadSGI or GLX 1.3's \c glXMakeContextCurrent - * function. - */ -static int driBindContext(__DRIcontext *pcp, - __DRIdrawable *pdp, - __DRIdrawable *prp) -{ - __DRIscreen *psp = NULL; - - /* - ** Assume error checking is done properly in glXMakeCurrent before - ** calling driUnbindContext. - */ - - if (!pcp) - return GL_FALSE; - - /* Bind the drawable to the context */ - psp = pcp->driScreenPriv; - pcp->driDrawablePriv = pdp; - pcp->driReadablePriv = prp; - if (pdp) { - pdp->driContextPriv = pcp; - dri_get_drawable(pdp); - } - if (prp && pdp != prp) { - dri_get_drawable(prp); - } - - /* - ** Now that we have a context associated with this drawable, we can - ** initialize the drawable information if has not been done before. - */ - - if (!psp->dri2.enabled) { - if (pdp && !pdp->pStamp) { - DRM_SPINLOCK(&psp->pSAREA->drawable_lock, psp->drawLockID); - __driUtilUpdateDrawableInfo(pdp); - DRM_SPINUNLOCK(&psp->pSAREA->drawable_lock, psp->drawLockID); - } - if (prp && pdp != prp && !prp->pStamp) { - DRM_SPINLOCK(&psp->pSAREA->drawable_lock, psp->drawLockID); - __driUtilUpdateDrawableInfo(prp); - DRM_SPINUNLOCK(&psp->pSAREA->drawable_lock, psp->drawLockID); - } - } - - /* Call device-specific MakeCurrent */ - return (*psp->DriverAPI.MakeCurrent)(pcp, pdp, prp); -} - -/*@}*/ - - -/*****************************************************************/ -/** \name Drawable handling functions */ -/*****************************************************************/ -/*@{*/ - -/** - * Update private drawable information. - * - * \param pdp pointer to the private drawable information to update. - * - * This function basically updates the __DRIdrawable struct's - * cliprect information by calling \c __DRIinterfaceMethods::getDrawableInfo. - * This is usually called by the DRI_VALIDATE_DRAWABLE_INFO macro which - * compares the __DRIdrwablePrivate pStamp and lastStamp values. If - * the values are different that means we have to update the clipping - * info. - */ -void -__driUtilUpdateDrawableInfo(__DRIdrawable *pdp) -{ - __DRIscreen *psp = pdp->driScreenPriv; - __DRIcontext *pcp = pdp->driContextPriv; - - if (!pcp - || ((pdp != pcp->driDrawablePriv) && (pdp != pcp->driReadablePriv))) { - /* ERROR!!! - * ...but we must ignore it. There can be many contexts bound to a - * drawable. - */ - } - - if (pdp->pClipRects) { - free(pdp->pClipRects); - pdp->pClipRects = NULL; - } - - if (pdp->pBackClipRects) { - free(pdp->pBackClipRects); - pdp->pBackClipRects = NULL; - } - - DRM_SPINUNLOCK(&psp->pSAREA->drawable_lock, psp->drawLockID); - - if (! (*psp->getDrawableInfo->getDrawableInfo)(pdp, - &pdp->index, &pdp->lastStamp, - &pdp->x, &pdp->y, &pdp->w, &pdp->h, - &pdp->numClipRects, &pdp->pClipRects, - &pdp->backX, - &pdp->backY, - &pdp->numBackClipRects, - &pdp->pBackClipRects, - pdp->loaderPrivate)) { - /* Error -- eg the window may have been destroyed. Keep going - * with no cliprects. - */ - pdp->pStamp = &pdp->lastStamp; /* prevent endless loop */ - pdp->numClipRects = 0; - pdp->pClipRects = NULL; - pdp->numBackClipRects = 0; - pdp->pBackClipRects = NULL; - } - else - pdp->pStamp = &(psp->pSAREA->drawableTable[pdp->index].stamp); - - DRM_SPINLOCK(&psp->pSAREA->drawable_lock, psp->drawLockID); -} - -/*@}*/ - -/*****************************************************************/ -/** \name GLX callbacks */ -/*****************************************************************/ -/*@{*/ - -static void driReportDamage(__DRIdrawable *pdp, - struct drm_clip_rect *pClipRects, int numClipRects) -{ - __DRIscreen *psp = pdp->driScreenPriv; - - /* Check that we actually have the new damage report method */ - if (psp->damage) { - /* Report the damage. Currently, all our drivers draw - * directly to the front buffer, so we report the damage there - * rather than to the backing storein (if any). - */ - (*psp->damage->reportDamage)(pdp, - pdp->x, pdp->y, - pClipRects, numClipRects, - GL_TRUE, pdp->loaderPrivate); - } -} - - -/** - * Swap buffers. - * - * \param drawablePrivate opaque pointer to the per-drawable private info. - * - * \internal - * This function calls __DRIdrawable::swapBuffers. - * - * Is called directly from glXSwapBuffers(). - */ -static void driSwapBuffers(__DRIdrawable *dPriv) -{ - __DRIscreen *psp = dPriv->driScreenPriv; - drm_clip_rect_t *rects; - int i; - - psp->DriverAPI.SwapBuffers(dPriv); - - if (!dPriv->numClipRects) - return; - - rects = malloc(sizeof(*rects) * dPriv->numClipRects); - - if (!rects) - return; - - for (i = 0; i < dPriv->numClipRects; i++) { - rects[i].x1 = dPriv->pClipRects[i].x1 - dPriv->x; - rects[i].y1 = dPriv->pClipRects[i].y1 - dPriv->y; - rects[i].x2 = dPriv->pClipRects[i].x2 - dPriv->x; - rects[i].y2 = dPriv->pClipRects[i].y2 - dPriv->y; - } - - driReportDamage(dPriv, rects, dPriv->numClipRects); - free(rects); -} - -static int driDrawableGetMSC( __DRIscreen *sPriv, __DRIdrawable *dPriv, - int64_t *msc ) -{ - return sPriv->DriverAPI.GetDrawableMSC(sPriv, dPriv, msc); -} - - -static int driWaitForMSC(__DRIdrawable *dPriv, int64_t target_msc, - int64_t divisor, int64_t remainder, - int64_t * msc, int64_t * sbc) -{ - __DRIswapInfo sInfo; - int status; - - status = dPriv->driScreenPriv->DriverAPI.WaitForMSC( dPriv, target_msc, - divisor, remainder, - msc ); - - /* GetSwapInfo() may not be provided by the driver if GLX_SGI_video_sync - * is supported but GLX_OML_sync_control is not. Therefore, don't return - * an error value if GetSwapInfo() is not implemented. - */ - if ( status == 0 - && dPriv->driScreenPriv->DriverAPI.GetSwapInfo ) { - status = dPriv->driScreenPriv->DriverAPI.GetSwapInfo( dPriv, & sInfo ); - *sbc = sInfo.swap_count; - } - - return status; -} - - -const __DRImediaStreamCounterExtension driMediaStreamCounterExtension = { - { __DRI_MEDIA_STREAM_COUNTER, __DRI_MEDIA_STREAM_COUNTER_VERSION }, - driWaitForMSC, - driDrawableGetMSC, -}; - - -static void driCopySubBuffer(__DRIdrawable *dPriv, - int x, int y, int w, int h) -{ - drm_clip_rect_t rect; - - rect.x1 = x; - rect.y1 = dPriv->h - y - h; - rect.x2 = x + w; - rect.y2 = rect.y1 + h; - driReportDamage(dPriv, &rect, 1); - - dPriv->driScreenPriv->DriverAPI.CopySubBuffer(dPriv, x, y, w, h); -} - -const __DRIcopySubBufferExtension driCopySubBufferExtension = { - { __DRI_COPY_SUB_BUFFER, __DRI_COPY_SUB_BUFFER_VERSION }, - driCopySubBuffer -}; - -static void driSetSwapInterval(__DRIdrawable *dPriv, unsigned int interval) -{ - dPriv->swap_interval = interval; -} - -static unsigned int driGetSwapInterval(__DRIdrawable *dPriv) -{ - return dPriv->swap_interval; -} - -const __DRIswapControlExtension driSwapControlExtension = { - { __DRI_SWAP_CONTROL, __DRI_SWAP_CONTROL_VERSION }, - driSetSwapInterval, - driGetSwapInterval -}; - - -/** - * This is called via __DRIscreenRec's createNewDrawable pointer. - */ -static __DRIdrawable * -driCreateNewDrawable(__DRIscreen *psp, const __DRIconfig *config, - drm_drawable_t hwDrawable, int renderType, - const int *attrs, void *data) -{ - __DRIdrawable *pdp; - - /* Since pbuffers are not yet supported, no drawable attributes are - * supported either. - */ - (void) attrs; - - pdp = malloc(sizeof *pdp); - if (!pdp) { - return NULL; - } - - pdp->driContextPriv = NULL; - pdp->loaderPrivate = data; - pdp->hHWDrawable = hwDrawable; - pdp->refcount = 1; - pdp->pStamp = NULL; - pdp->lastStamp = 0; - pdp->index = 0; - pdp->x = 0; - pdp->y = 0; - pdp->w = 0; - pdp->h = 0; - pdp->numClipRects = 0; - pdp->numBackClipRects = 0; - pdp->pClipRects = NULL; - pdp->pBackClipRects = NULL; - pdp->vblSeq = 0; - pdp->vblFlags = 0; - - pdp->driScreenPriv = psp; - - if (!(*psp->DriverAPI.CreateBuffer)(psp, pdp, &config->modes, 0)) { - free(pdp); - return NULL; - } - - pdp->msc_base = 0; - - /* This special default value is replaced with the configured - * default value when the drawable is first bound to a direct - * rendering context. - */ - pdp->swap_interval = (unsigned)-1; - - return pdp; -} - - -static __DRIdrawable * -dri2CreateNewDrawable(__DRIscreen *screen, - const __DRIconfig *config, - void *loaderPrivate) -{ - __DRIdrawable *pdraw; - - pdraw = driCreateNewDrawable(screen, config, 0, 0, NULL, loaderPrivate); - if (!pdraw) - return NULL; - - pdraw->pClipRects = &pdraw->dri2.clipRect; - pdraw->pBackClipRects = &pdraw->dri2.clipRect; - - pdraw->pStamp = &pdraw->dri2.stamp; - *pdraw->pStamp = pdraw->lastStamp + 1; - - return pdraw; -} - -static __DRIbuffer * -dri2AllocateBuffer(__DRIscreen *screen, - unsigned int attachment, unsigned int format, - int width, int height) -{ - return (*screen->DriverAPI.AllocateBuffer)(screen, attachment, format, - width, height); -} - -static void -dri2ReleaseBuffer(__DRIscreen *screen, __DRIbuffer *buffer) -{ - (*screen->DriverAPI.ReleaseBuffer)(screen, buffer); -} - - -static int -dri2ConfigQueryb(__DRIscreen *screen, const char *var, GLboolean *val) -{ - if (!driCheckOption(&screen->optionCache, var, DRI_BOOL)) - return -1; - - *val = driQueryOptionb(&screen->optionCache, var); - - return 0; -} - -static int -dri2ConfigQueryi(__DRIscreen *screen, const char *var, GLint *val) -{ - if (!driCheckOption(&screen->optionCache, var, DRI_INT) && - !driCheckOption(&screen->optionCache, var, DRI_ENUM)) - return -1; - - *val = driQueryOptioni(&screen->optionCache, var); - - return 0; -} - -static int -dri2ConfigQueryf(__DRIscreen *screen, const char *var, GLfloat *val) -{ - if (!driCheckOption(&screen->optionCache, var, DRI_FLOAT)) - return -1; - - *val = driQueryOptionf(&screen->optionCache, var); - - return 0; -} - - -static void dri_get_drawable(__DRIdrawable *pdp) -{ - pdp->refcount++; -} - -static void dri_put_drawable(__DRIdrawable *pdp) -{ - __DRIscreen *psp; - - if (pdp) { - pdp->refcount--; - if (pdp->refcount) - return; - - psp = pdp->driScreenPriv; - (*psp->DriverAPI.DestroyBuffer)(pdp); - if (pdp->pClipRects && pdp->pClipRects != &pdp->dri2.clipRect) { - free(pdp->pClipRects); - pdp->pClipRects = NULL; - } - if (pdp->pBackClipRects && pdp->pClipRects != &pdp->dri2.clipRect) { - free(pdp->pBackClipRects); - pdp->pBackClipRects = NULL; - } - free(pdp); - } -} - -static void -driDestroyDrawable(__DRIdrawable *pdp) -{ - dri_put_drawable(pdp); -} - -/*@}*/ - - -/*****************************************************************/ -/** \name Context handling functions */ -/*****************************************************************/ -/*@{*/ - -/** - * Destroy the per-context private information. - * - * \internal - * This function calls __DriverAPIRec::DestroyContext on \p contextPrivate, calls - * drmDestroyContext(), and finally frees \p contextPrivate. - */ -static void -driDestroyContext(__DRIcontext *pcp) -{ - if (pcp) { - (*pcp->driScreenPriv->DriverAPI.DestroyContext)(pcp); - free(pcp); - } -} - - -/** - * Create the per-drawable private driver information. - * - * \param render_type Type of rendering target. \c GLX_RGBA is the only - * type likely to ever be supported for direct-rendering. - * \param shared Context with which to share textures, etc. or NULL - * - * \returns An opaque pointer to the per-context private information on - * success, or \c NULL on failure. - * - * \internal - * This function allocates and fills a __DRIcontextRec structure. It - * performs some device independent initialization and passes all the - * relevent information to __DriverAPIRec::CreateContext to create the - * context. - * - */ -static __DRIcontext * -driCreateNewContext(__DRIscreen *psp, const __DRIconfig *config, - int render_type, __DRIcontext *shared, - drm_context_t hwContext, void *data) -{ - __DRIcontext *pcp; - void * const shareCtx = (shared != NULL) ? shared->driverPrivate : NULL; - - pcp = malloc(sizeof *pcp); - if (!pcp) - return NULL; - - pcp->driScreenPriv = psp; - pcp->driDrawablePriv = NULL; - pcp->loaderPrivate = data; - - pcp->dri2.draw_stamp = 0; - pcp->dri2.read_stamp = 0; - - pcp->hHWContext = hwContext; - - if ( !(*psp->DriverAPI.CreateContext)(API_OPENGL, - &config->modes, pcp, shareCtx) ) { - free(pcp); - return NULL; - } - - return pcp; -} - -static unsigned int -dri2GetAPIMask(__DRIscreen *screen) -{ - return screen->api_mask; -} - -static __DRIcontext * -dri2CreateNewContextForAPI(__DRIscreen *screen, int api, - const __DRIconfig *config, - __DRIcontext *shared, void *data) -{ - __DRIcontext *context; - const struct gl_config *modes = (config != NULL) ? &config->modes : NULL; - void *shareCtx = (shared != NULL) ? shared->driverPrivate : NULL; - gl_api mesa_api; - - if (!(screen->api_mask & (1 << api))) - return NULL; - - switch (api) { - case __DRI_API_OPENGL: - mesa_api = API_OPENGL; - break; - case __DRI_API_GLES: - mesa_api = API_OPENGLES; - break; - case __DRI_API_GLES2: - mesa_api = API_OPENGLES2; - break; - default: - return NULL; - } - - context = malloc(sizeof *context); - if (!context) - return NULL; - - context->driScreenPriv = screen; - context->driDrawablePriv = NULL; - context->loaderPrivate = data; - - if (!(*screen->DriverAPI.CreateContext)(mesa_api, modes, - context, shareCtx) ) { - free(context); - return NULL; - } - - return context; -} - - -static __DRIcontext * -dri2CreateNewContext(__DRIscreen *screen, const __DRIconfig *config, - __DRIcontext *shared, void *data) -{ - return dri2CreateNewContextForAPI(screen, __DRI_API_OPENGL, - config, shared, data); -} - -static int -driCopyContext(__DRIcontext *dest, __DRIcontext *src, unsigned long mask) -{ - return GL_FALSE; -} - -/*@}*/ - - -/*****************************************************************/ -/** \name Screen handling functions */ -/*****************************************************************/ -/*@{*/ - -/** - * Destroy the per-screen private information. - * - * \internal - * This function calls __DriverAPIRec::DestroyScreen on \p screenPrivate, calls - * drmClose(), and finally frees \p screenPrivate. - */ -static void driDestroyScreen(__DRIscreen *psp) -{ - if (psp) { - /* No interaction with the X-server is possible at this point. This - * routine is called after XCloseDisplay, so there is no protocol - * stream open to the X-server anymore. - */ - - _mesa_destroy_shader_compiler(); - - if (psp->DriverAPI.DestroyScreen) - (*psp->DriverAPI.DestroyScreen)(psp); - - if (!psp->dri2.enabled) { - (void)drmUnmap((drmAddress)psp->pSAREA, SAREA_MAX); - (void)drmUnmap((drmAddress)psp->pFB, psp->fbSize); - (void)drmCloseOnce(psp->fd); - } else { - driDestroyOptionCache(&psp->optionCache); - driDestroyOptionInfo(&psp->optionInfo); - } - - free(psp); - } -} - -static void -setupLoaderExtensions(__DRIscreen *psp, - const __DRIextension **extensions) -{ - int i; - - for (i = 0; extensions[i]; i++) { - if (strcmp(extensions[i]->name, __DRI_GET_DRAWABLE_INFO) == 0) - psp->getDrawableInfo = (__DRIgetDrawableInfoExtension *) extensions[i]; - if (strcmp(extensions[i]->name, __DRI_DAMAGE) == 0) - psp->damage = (__DRIdamageExtension *) extensions[i]; - if (strcmp(extensions[i]->name, __DRI_SYSTEM_TIME) == 0) - psp->systemTime = (__DRIsystemTimeExtension *) extensions[i]; - if (strcmp(extensions[i]->name, __DRI_DRI2_LOADER) == 0) - psp->dri2.loader = (__DRIdri2LoaderExtension *) extensions[i]; - if (strcmp(extensions[i]->name, __DRI_IMAGE_LOOKUP) == 0) - psp->dri2.image = (__DRIimageLookupExtension *) extensions[i]; - if (strcmp(extensions[i]->name, __DRI_USE_INVALIDATE) == 0) - psp->dri2.useInvalidate = (__DRIuseInvalidateExtension *) extensions[i]; - } -} - -/** - * This is the bootstrap function for the driver. libGL supplies all of the - * requisite information about the system, and the driver initializes itself. - * This routine also fills in the linked list pointed to by \c driver_modes - * with the \c struct gl_config that the driver can support for windows or - * pbuffers. - * - * For legacy DRI. - * - * \param scrn Index of the screen - * \param ddx_version Version of the 2D DDX. This may not be meaningful for - * all drivers. - * \param dri_version Version of the "server-side" DRI. - * \param drm_version Version of the kernel DRM. - * \param frame_buffer Data describing the location and layout of the - * framebuffer. - * \param pSAREA Pointer to the SAREA. - * \param fd Device handle for the DRM. - * \param extensions ?? - * \param driver_modes Returns modes suppoted by the driver - * \param loaderPrivate ?? - * - * \note There is no need to check the minimum API version in this - * function. Since the name of this function is versioned, it is - * impossible for a loader that is too old to even load this driver. - */ -static __DRIscreen * -driCreateNewScreen(int scrn, - const __DRIversion *ddx_version, - const __DRIversion *dri_version, - const __DRIversion *drm_version, - const __DRIframebuffer *frame_buffer, - drmAddress pSAREA, int fd, - const __DRIextension **extensions, - const __DRIconfig ***driver_modes, - void *loaderPrivate) -{ - static const __DRIextension *emptyExtensionList[] = { NULL }; - __DRIscreen *psp; - - if (driDriverAPI.InitScreen == NULL) - return NULL; - - psp = calloc(1, sizeof *psp); - if (!psp) - return NULL; - - setupLoaderExtensions(psp, extensions); - - /* - ** NOT_DONE: This is used by the X server to detect when the client - ** has died while holding the drawable lock. The client sets the - ** drawable lock to this value. - */ - psp->drawLockID = 1; - - psp->drm_version = *drm_version; - psp->ddx_version = *ddx_version; - psp->dri_version = *dri_version; - - psp->pSAREA = pSAREA; - psp->lock = (drmLock *) &psp->pSAREA->lock; - - psp->pFB = frame_buffer->base; - psp->fbSize = frame_buffer->size; - psp->fbStride = frame_buffer->stride; - psp->fbWidth = frame_buffer->width; - psp->fbHeight = frame_buffer->height; - psp->devPrivSize = frame_buffer->dev_priv_size; - psp->pDevPriv = frame_buffer->dev_priv; - psp->fbBPP = psp->fbStride * 8 / frame_buffer->width; - - psp->extensions = emptyExtensionList; - psp->fd = fd; - psp->myNum = scrn; - psp->dri2.enabled = GL_FALSE; - - psp->DriverAPI = driDriverAPI; - psp->api_mask = (1 << __DRI_API_OPENGL); - - *driver_modes = driDriverAPI.InitScreen(psp); - if (*driver_modes == NULL) { - free(psp); - return NULL; - } - - return psp; -} - -/** - * DRI2 - */ -static __DRIscreen * -dri2CreateNewScreen(int scrn, int fd, - const __DRIextension **extensions, - const __DRIconfig ***driver_configs, void *data) -{ - static const __DRIextension *emptyExtensionList[] = { NULL }; - __DRIscreen *psp; - drmVersionPtr version; - - if (driDriverAPI.InitScreen2 == NULL) - return NULL; - - psp = calloc(1, sizeof(*psp)); - if (!psp) - return NULL; - - setupLoaderExtensions(psp, extensions); - - version = drmGetVersion(fd); - if (version) { - psp->drm_version.major = version->version_major; - psp->drm_version.minor = version->version_minor; - psp->drm_version.patch = version->version_patchlevel; - drmFreeVersion(version); - } - - psp->extensions = emptyExtensionList; - psp->fd = fd; - psp->myNum = scrn; - psp->dri2.enabled = GL_TRUE; - - psp->DriverAPI = driDriverAPI; - psp->api_mask = (1 << __DRI_API_OPENGL); - *driver_configs = driDriverAPI.InitScreen2(psp); - if (*driver_configs == NULL) { - free(psp); - return NULL; - } - - psp->DriverAPI = driDriverAPI; - psp->loaderPrivate = data; - - driParseOptionInfo(&psp->optionInfo, __dri2ConfigOptions, - __dri2NConfigOptions); - driParseConfigFiles(&psp->optionCache, &psp->optionInfo, psp->myNum, - "dri2"); - - return psp; -} - -static const __DRIextension **driGetExtensions(__DRIscreen *psp) -{ - return psp->extensions; -} - -/** Core interface */ -const __DRIcoreExtension driCoreExtension = { - { __DRI_CORE, __DRI_CORE_VERSION }, - NULL, - driDestroyScreen, - driGetExtensions, - driGetConfigAttrib, - driIndexConfigAttrib, - NULL, - driDestroyDrawable, - driSwapBuffers, - NULL, - driCopyContext, - driDestroyContext, - driBindContext, - driUnbindContext -}; - -/** Legacy DRI interface */ -const __DRIlegacyExtension driLegacyExtension = { - { __DRI_LEGACY, __DRI_LEGACY_VERSION }, - driCreateNewScreen, - driCreateNewDrawable, - driCreateNewContext, -}; - -/** DRI2 interface */ -const __DRIdri2Extension driDRI2Extension = { - { __DRI_DRI2, __DRI_DRI2_VERSION }, - dri2CreateNewScreen, - dri2CreateNewDrawable, - dri2CreateNewContext, - dri2GetAPIMask, - dri2CreateNewContextForAPI, - dri2AllocateBuffer, - dri2ReleaseBuffer -}; - -const __DRI2configQueryExtension dri2ConfigQueryExtension = { - { __DRI2_CONFIG_QUERY, __DRI2_CONFIG_QUERY_VERSION }, - dri2ConfigQueryb, - dri2ConfigQueryi, - dri2ConfigQueryf, -}; - -/** - * Calculate amount of swap interval used between GLX buffer swaps. - * - * The usage value, on the range [0,max], is the fraction of total swap - * interval time used between GLX buffer swaps is calculated. - * - * \f$p = t_d / (i * t_r)\f$ - * - * Where \f$t_d\f$ is the time since the last GLX buffer swap, \f$i\f$ is the - * swap interval (as set by \c glXSwapIntervalSGI), and \f$t_r\f$ time - * required for a single vertical refresh period (as returned by \c - * glXGetMscRateOML). - * - * See the documentation for the GLX_MESA_swap_frame_usage extension for more - * details. - * - * \param dPriv Pointer to the private drawable structure. - * \return If less than a single swap interval time period was required - * between GLX buffer swaps, a number greater than 0 and less than - * 1.0 is returned. If exactly one swap interval time period is - * required, 1.0 is returned, and if more than one is required then - * a number greater than 1.0 will be returned. - * - * \sa glXSwapIntervalSGI glXGetMscRateOML - * - * \todo Instead of caching the \c glXGetMscRateOML function pointer, would it - * be possible to cache the sync rate? - */ -float -driCalculateSwapUsage( __DRIdrawable *dPriv, int64_t last_swap_ust, - int64_t current_ust ) -{ - int32_t n; - int32_t d; - int interval; - float usage = 1.0; - __DRIscreen *psp = dPriv->driScreenPriv; - - if ( (*psp->systemTime->getMSCRate)(dPriv, &n, &d, dPriv->loaderPrivate) ) { - interval = (dPriv->swap_interval != 0) ? dPriv->swap_interval : 1; - - - /* We want to calculate - * (current_UST - last_swap_UST) / (interval * us_per_refresh). We get - * current_UST by calling __glXGetUST. last_swap_UST is stored in - * dPriv->swap_ust. interval has already been calculated. - * - * The only tricky part is us_per_refresh. us_per_refresh is - * 1000000 / MSC_rate. We know the MSC_rate is n / d. We can flip it - * around and say us_per_refresh = 1000000 * d / n. Since this goes in - * the denominator of the final calculation, we calculate - * (interval * 1000000 * d) and move n into the numerator. - */ - - usage = (current_ust - last_swap_ust); - usage *= n; - usage /= (interval * d); - usage /= 1000000.0; - } - - return usage; -} - -void -dri2InvalidateDrawable(__DRIdrawable *drawable) -{ - drawable->dri2.stamp++; -} - -/*@}*/ +/**
+ * \file dri_util.c
+ * DRI utility functions.
+ *
+ * This module acts as glue between GLX and the actual hardware driver. A DRI
+ * driver doesn't really \e have to use any of this - it's optional. But, some
+ * useful stuff is done here that otherwise would have to be duplicated in most
+ * drivers.
+ *
+ * Basically, these utility functions take care of some of the dirty details of
+ * screen initialization, context creation, context binding, DRM setup, etc.
+ *
+ * These functions are compiled into each DRI driver so libGL.so knows nothing
+ * about them.
+ */
+
+
+#include <assert.h>
+#include <stdarg.h>
+#include <unistd.h>
+#include <sys/mman.h>
+#include <stdio.h>
+
+#ifndef MAP_FAILED
+#define MAP_FAILED ((void *)-1)
+#endif
+
+#include "main/imports.h"
+#define None 0
+
+#include "dri_util.h"
+#include "drm_sarea.h"
+#include "utils.h"
+#include "xmlpool.h"
+#include "../glsl/glsl_parser_extras.h"
+
+PUBLIC const char __dri2ConfigOptions[] =
+ DRI_CONF_BEGIN
+ DRI_CONF_SECTION_PERFORMANCE
+ DRI_CONF_VBLANK_MODE(DRI_CONF_VBLANK_DEF_INTERVAL_1)
+ DRI_CONF_SECTION_END
+ DRI_CONF_END;
+
+static const uint __dri2NConfigOptions = 1;
+
+#ifndef GLX_OML_sync_control
+typedef GLboolean ( * PFNGLXGETMSCRATEOMLPROC) (__DRIdrawable *drawable, int32_t *numerator, int32_t *denominator);
+#endif
+
+static void dri_get_drawable(__DRIdrawable *pdp);
+static void dri_put_drawable(__DRIdrawable *pdp);
+
+/**
+ * This is just a token extension used to signal that the driver
+ * supports setting a read drawable.
+ */
+const __DRIextension driReadDrawableExtension = {
+ __DRI_READ_DRAWABLE, __DRI_READ_DRAWABLE_VERSION
+};
+
+GLint
+driIntersectArea( drm_clip_rect_t rect1, drm_clip_rect_t rect2 )
+{
+ if (rect2.x1 > rect1.x1) rect1.x1 = rect2.x1;
+ if (rect2.x2 < rect1.x2) rect1.x2 = rect2.x2;
+ if (rect2.y1 > rect1.y1) rect1.y1 = rect2.y1;
+ if (rect2.y2 < rect1.y2) rect1.y2 = rect2.y2;
+
+ if (rect1.x1 > rect1.x2 || rect1.y1 > rect1.y2) return 0;
+
+ return (rect1.x2 - rect1.x1) * (rect1.y2 - rect1.y1);
+}
+
+/*****************************************************************/
+/** \name Context (un)binding functions */
+/*****************************************************************/
+/*@{*/
+
+/**
+ * Unbind context.
+ *
+ * \param scrn the screen.
+ * \param gc context.
+ *
+ * \return \c GL_TRUE on success, or \c GL_FALSE on failure.
+ *
+ * \internal
+ * This function calls __DriverAPIRec::UnbindContext, and then decrements
+ * __DRIdrawableRec::refcount which must be non-zero for a successful
+ * return.
+ *
+ * While casting the opaque private pointers associated with the parameters
+ * into their respective real types it also assures they are not \c NULL.
+ */
+static int driUnbindContext(__DRIcontext *pcp)
+{
+ __DRIscreen *psp;
+ __DRIdrawable *pdp;
+ __DRIdrawable *prp;
+
+ /*
+ ** Assume error checking is done properly in glXMakeCurrent before
+ ** calling driUnbindContext.
+ */
+
+ if (pcp == NULL)
+ return GL_FALSE;
+
+ psp = pcp->driScreenPriv;
+ pdp = pcp->driDrawablePriv;
+ prp = pcp->driReadablePriv;
+
+ /* already unbound */
+ if (!pdp && !prp)
+ return GL_TRUE;
+ /* Let driver unbind drawable from context */
+ (*psp->DriverAPI.UnbindContext)(pcp);
+
+ assert(pdp);
+ if (pdp->refcount == 0) {
+ /* ERROR!!! */
+ return GL_FALSE;
+ }
+
+ dri_put_drawable(pdp);
+
+ if (prp != pdp) {
+ if (prp->refcount == 0) {
+ /* ERROR!!! */
+ return GL_FALSE;
+ }
+
+ dri_put_drawable(prp);
+ }
+
+
+ /* XXX this is disabled so that if we call SwapBuffers on an unbound
+ * window we can determine the last context bound to the window and
+ * use that context's lock. (BrianP, 2-Dec-2000)
+ */
+ pcp->driDrawablePriv = pcp->driReadablePriv = NULL;
+
+ return GL_TRUE;
+}
+
+/**
+ * This function takes both a read buffer and a draw buffer. This is needed
+ * for \c glXMakeCurrentReadSGI or GLX 1.3's \c glXMakeContextCurrent
+ * function.
+ */
+static int driBindContext(__DRIcontext *pcp,
+ __DRIdrawable *pdp,
+ __DRIdrawable *prp)
+{
+ __DRIscreen *psp = NULL;
+
+ /*
+ ** Assume error checking is done properly in glXMakeCurrent before
+ ** calling driUnbindContext.
+ */
+
+ if (!pcp)
+ return GL_FALSE;
+
+ /* Bind the drawable to the context */
+ psp = pcp->driScreenPriv;
+ pcp->driDrawablePriv = pdp;
+ pcp->driReadablePriv = prp;
+ if (pdp) {
+ pdp->driContextPriv = pcp;
+ dri_get_drawable(pdp);
+ }
+ if (prp && pdp != prp) {
+ dri_get_drawable(prp);
+ }
+
+ /*
+ ** Now that we have a context associated with this drawable, we can
+ ** initialize the drawable information if has not been done before.
+ */
+
+ if (!psp->dri2.enabled) {
+ if (pdp && !pdp->pStamp) {
+ DRM_SPINLOCK(&psp->pSAREA->drawable_lock, psp->drawLockID);
+ __driUtilUpdateDrawableInfo(pdp);
+ DRM_SPINUNLOCK(&psp->pSAREA->drawable_lock, psp->drawLockID);
+ }
+ if (prp && pdp != prp && !prp->pStamp) {
+ DRM_SPINLOCK(&psp->pSAREA->drawable_lock, psp->drawLockID);
+ __driUtilUpdateDrawableInfo(prp);
+ DRM_SPINUNLOCK(&psp->pSAREA->drawable_lock, psp->drawLockID);
+ }
+ }
+
+ /* Call device-specific MakeCurrent */
+ return (*psp->DriverAPI.MakeCurrent)(pcp, pdp, prp);
+}
+
+/*@}*/
+
+
+/*****************************************************************/
+/** \name Drawable handling functions */
+/*****************************************************************/
+/*@{*/
+
+/**
+ * Update private drawable information.
+ *
+ * \param pdp pointer to the private drawable information to update.
+ *
+ * This function basically updates the __DRIdrawable struct's
+ * cliprect information by calling \c __DRIinterfaceMethods::getDrawableInfo.
+ * This is usually called by the DRI_VALIDATE_DRAWABLE_INFO macro which
+ * compares the __DRIdrwablePrivate pStamp and lastStamp values. If
+ * the values are different that means we have to update the clipping
+ * info.
+ */
+void
+__driUtilUpdateDrawableInfo(__DRIdrawable *pdp)
+{
+ __DRIscreen *psp = pdp->driScreenPriv;
+ __DRIcontext *pcp = pdp->driContextPriv;
+
+ if (!pcp
+ || ((pdp != pcp->driDrawablePriv) && (pdp != pcp->driReadablePriv))) {
+ /* ERROR!!!
+ * ...but we must ignore it. There can be many contexts bound to a
+ * drawable.
+ */
+ }
+
+ if (pdp->pClipRects) {
+ free(pdp->pClipRects);
+ pdp->pClipRects = NULL;
+ }
+
+ if (pdp->pBackClipRects) {
+ free(pdp->pBackClipRects);
+ pdp->pBackClipRects = NULL;
+ }
+
+ DRM_SPINUNLOCK(&psp->pSAREA->drawable_lock, psp->drawLockID);
+
+ if (! (*psp->getDrawableInfo->getDrawableInfo)(pdp,
+ &pdp->index, &pdp->lastStamp,
+ &pdp->x, &pdp->y, &pdp->w, &pdp->h,
+ &pdp->numClipRects, &pdp->pClipRects,
+ &pdp->backX,
+ &pdp->backY,
+ &pdp->numBackClipRects,
+ &pdp->pBackClipRects,
+ pdp->loaderPrivate)) {
+ /* Error -- eg the window may have been destroyed. Keep going
+ * with no cliprects.
+ */
+ pdp->pStamp = &pdp->lastStamp; /* prevent endless loop */
+ pdp->numClipRects = 0;
+ pdp->pClipRects = NULL;
+ pdp->numBackClipRects = 0;
+ pdp->pBackClipRects = NULL;
+ }
+ else
+ pdp->pStamp = &(psp->pSAREA->drawableTable[pdp->index].stamp);
+
+ DRM_SPINLOCK(&psp->pSAREA->drawable_lock, psp->drawLockID);
+}
+
+/*@}*/
+
+/*****************************************************************/
+/** \name GLX callbacks */
+/*****************************************************************/
+/*@{*/
+
+static void driReportDamage(__DRIdrawable *pdp,
+ struct drm_clip_rect *pClipRects, int numClipRects)
+{
+ __DRIscreen *psp = pdp->driScreenPriv;
+
+ /* Check that we actually have the new damage report method */
+ if (psp->damage) {
+ /* Report the damage. Currently, all our drivers draw
+ * directly to the front buffer, so we report the damage there
+ * rather than to the backing storein (if any).
+ */
+ (*psp->damage->reportDamage)(pdp,
+ pdp->x, pdp->y,
+ pClipRects, numClipRects,
+ GL_TRUE, pdp->loaderPrivate);
+ }
+}
+
+
+/**
+ * Swap buffers.
+ *
+ * \param drawablePrivate opaque pointer to the per-drawable private info.
+ *
+ * \internal
+ * This function calls __DRIdrawable::swapBuffers.
+ *
+ * Is called directly from glXSwapBuffers().
+ */
+static void driSwapBuffers(__DRIdrawable *dPriv)
+{
+ __DRIscreen *psp = dPriv->driScreenPriv;
+ drm_clip_rect_t *rects;
+ int i;
+
+ psp->DriverAPI.SwapBuffers(dPriv);
+
+ if (!dPriv->numClipRects)
+ return;
+
+ rects = malloc(sizeof(*rects) * dPriv->numClipRects);
+
+ if (!rects)
+ return;
+
+ for (i = 0; i < dPriv->numClipRects; i++) {
+ rects[i].x1 = dPriv->pClipRects[i].x1 - dPriv->x;
+ rects[i].y1 = dPriv->pClipRects[i].y1 - dPriv->y;
+ rects[i].x2 = dPriv->pClipRects[i].x2 - dPriv->x;
+ rects[i].y2 = dPriv->pClipRects[i].y2 - dPriv->y;
+ }
+
+ driReportDamage(dPriv, rects, dPriv->numClipRects);
+ free(rects);
+}
+
+static int driDrawableGetMSC( __DRIscreen *sPriv, __DRIdrawable *dPriv,
+ int64_t *msc )
+{
+ return sPriv->DriverAPI.GetDrawableMSC(sPriv, dPriv, msc);
+}
+
+
+static int driWaitForMSC(__DRIdrawable *dPriv, int64_t target_msc,
+ int64_t divisor, int64_t remainder,
+ int64_t * msc, int64_t * sbc)
+{
+ __DRIswapInfo sInfo;
+ int status;
+
+ status = dPriv->driScreenPriv->DriverAPI.WaitForMSC( dPriv, target_msc,
+ divisor, remainder,
+ msc );
+
+ /* GetSwapInfo() may not be provided by the driver if GLX_SGI_video_sync
+ * is supported but GLX_OML_sync_control is not. Therefore, don't return
+ * an error value if GetSwapInfo() is not implemented.
+ */
+ if ( status == 0
+ && dPriv->driScreenPriv->DriverAPI.GetSwapInfo ) {
+ status = dPriv->driScreenPriv->DriverAPI.GetSwapInfo( dPriv, & sInfo );
+ *sbc = sInfo.swap_count;
+ }
+
+ return status;
+}
+
+
+const __DRImediaStreamCounterExtension driMediaStreamCounterExtension = {
+ { __DRI_MEDIA_STREAM_COUNTER, __DRI_MEDIA_STREAM_COUNTER_VERSION },
+ driWaitForMSC,
+ driDrawableGetMSC,
+};
+
+
+static void driCopySubBuffer(__DRIdrawable *dPriv,
+ int x, int y, int w, int h)
+{
+ drm_clip_rect_t rect;
+
+ rect.x1 = x;
+ rect.y1 = dPriv->h - y - h;
+ rect.x2 = x + w;
+ rect.y2 = rect.y1 + h;
+ driReportDamage(dPriv, &rect, 1);
+
+ dPriv->driScreenPriv->DriverAPI.CopySubBuffer(dPriv, x, y, w, h);
+}
+
+const __DRIcopySubBufferExtension driCopySubBufferExtension = {
+ { __DRI_COPY_SUB_BUFFER, __DRI_COPY_SUB_BUFFER_VERSION },
+ driCopySubBuffer
+};
+
+static void driSetSwapInterval(__DRIdrawable *dPriv, unsigned int interval)
+{
+ dPriv->swap_interval = interval;
+}
+
+static unsigned int driGetSwapInterval(__DRIdrawable *dPriv)
+{
+ return dPriv->swap_interval;
+}
+
+const __DRIswapControlExtension driSwapControlExtension = {
+ { __DRI_SWAP_CONTROL, __DRI_SWAP_CONTROL_VERSION },
+ driSetSwapInterval,
+ driGetSwapInterval
+};
+
+
+/**
+ * This is called via __DRIscreenRec's createNewDrawable pointer.
+ */
+static __DRIdrawable *
+driCreateNewDrawable(__DRIscreen *psp, const __DRIconfig *config,
+ drm_drawable_t hwDrawable, int renderType,
+ const int *attrs, void *data)
+{
+ __DRIdrawable *pdp;
+
+ /* Since pbuffers are not yet supported, no drawable attributes are
+ * supported either.
+ */
+ (void) attrs;
+
+ pdp = malloc(sizeof *pdp);
+ if (!pdp) {
+ return NULL;
+ }
+
+ pdp->driContextPriv = NULL;
+ pdp->loaderPrivate = data;
+ pdp->hHWDrawable = hwDrawable;
+ pdp->refcount = 1;
+ pdp->pStamp = NULL;
+ pdp->lastStamp = 0;
+ pdp->index = 0;
+ pdp->x = 0;
+ pdp->y = 0;
+ pdp->w = 0;
+ pdp->h = 0;
+ pdp->numClipRects = 0;
+ pdp->numBackClipRects = 0;
+ pdp->pClipRects = NULL;
+ pdp->pBackClipRects = NULL;
+ pdp->vblSeq = 0;
+ pdp->vblFlags = 0;
+
+ pdp->driScreenPriv = psp;
+
+ if (!(*psp->DriverAPI.CreateBuffer)(psp, pdp, &config->modes, 0)) {
+ free(pdp);
+ return NULL;
+ }
+
+ pdp->msc_base = 0;
+
+ /* This special default value is replaced with the configured
+ * default value when the drawable is first bound to a direct
+ * rendering context.
+ */
+ pdp->swap_interval = (unsigned)-1;
+
+ return pdp;
+}
+
+
+static __DRIdrawable *
+dri2CreateNewDrawable(__DRIscreen *screen,
+ const __DRIconfig *config,
+ void *loaderPrivate)
+{
+ __DRIdrawable *pdraw;
+
+ pdraw = driCreateNewDrawable(screen, config, 0, 0, NULL, loaderPrivate);
+ if (!pdraw)
+ return NULL;
+
+ pdraw->pClipRects = &pdraw->dri2.clipRect;
+ pdraw->pBackClipRects = &pdraw->dri2.clipRect;
+
+ pdraw->pStamp = &pdraw->dri2.stamp;
+ *pdraw->pStamp = pdraw->lastStamp + 1;
+
+ return pdraw;
+}
+
+static __DRIbuffer *
+dri2AllocateBuffer(__DRIscreen *screen,
+ unsigned int attachment, unsigned int format,
+ int width, int height)
+{
+ return (*screen->DriverAPI.AllocateBuffer)(screen, attachment, format,
+ width, height);
+}
+
+static void
+dri2ReleaseBuffer(__DRIscreen *screen, __DRIbuffer *buffer)
+{
+ (*screen->DriverAPI.ReleaseBuffer)(screen, buffer);
+}
+
+
+static int
+dri2ConfigQueryb(__DRIscreen *screen, const char *var, GLboolean *val)
+{
+ if (!driCheckOption(&screen->optionCache, var, DRI_BOOL))
+ return -1;
+
+ *val = driQueryOptionb(&screen->optionCache, var);
+
+ return 0;
+}
+
+static int
+dri2ConfigQueryi(__DRIscreen *screen, const char *var, GLint *val)
+{
+ if (!driCheckOption(&screen->optionCache, var, DRI_INT) &&
+ !driCheckOption(&screen->optionCache, var, DRI_ENUM))
+ return -1;
+
+ *val = driQueryOptioni(&screen->optionCache, var);
+
+ return 0;
+}
+
+static int
+dri2ConfigQueryf(__DRIscreen *screen, const char *var, GLfloat *val)
+{
+ if (!driCheckOption(&screen->optionCache, var, DRI_FLOAT))
+ return -1;
+
+ *val = driQueryOptionf(&screen->optionCache, var);
+
+ return 0;
+}
+
+
+static void dri_get_drawable(__DRIdrawable *pdp)
+{
+ pdp->refcount++;
+}
+
+static void dri_put_drawable(__DRIdrawable *pdp)
+{
+ __DRIscreen *psp;
+
+ if (pdp) {
+ pdp->refcount--;
+ if (pdp->refcount)
+ return;
+
+ psp = pdp->driScreenPriv;
+ (*psp->DriverAPI.DestroyBuffer)(pdp);
+ if (pdp->pClipRects && pdp->pClipRects != &pdp->dri2.clipRect) {
+ free(pdp->pClipRects);
+ pdp->pClipRects = NULL;
+ }
+ if (pdp->pBackClipRects && pdp->pClipRects != &pdp->dri2.clipRect) {
+ free(pdp->pBackClipRects);
+ pdp->pBackClipRects = NULL;
+ }
+ free(pdp);
+ }
+}
+
+static void
+driDestroyDrawable(__DRIdrawable *pdp)
+{
+ dri_put_drawable(pdp);
+}
+
+/*@}*/
+
+
+/*****************************************************************/
+/** \name Context handling functions */
+/*****************************************************************/
+/*@{*/
+
+/**
+ * Destroy the per-context private information.
+ *
+ * \internal
+ * This function calls __DriverAPIRec::DestroyContext on \p contextPrivate, calls
+ * drmDestroyContext(), and finally frees \p contextPrivate.
+ */
+static void
+driDestroyContext(__DRIcontext *pcp)
+{
+ if (pcp) {
+ (*pcp->driScreenPriv->DriverAPI.DestroyContext)(pcp);
+ free(pcp);
+ }
+}
+
+
+/**
+ * Create the per-drawable private driver information.
+ *
+ * \param render_type Type of rendering target. \c GLX_RGBA is the only
+ * type likely to ever be supported for direct-rendering.
+ * \param shared Context with which to share textures, etc. or NULL
+ *
+ * \returns An opaque pointer to the per-context private information on
+ * success, or \c NULL on failure.
+ *
+ * \internal
+ * This function allocates and fills a __DRIcontextRec structure. It
+ * performs some device independent initialization and passes all the
+ * relevent information to __DriverAPIRec::CreateContext to create the
+ * context.
+ *
+ */
+static __DRIcontext *
+driCreateNewContext(__DRIscreen *psp, const __DRIconfig *config,
+ int render_type, __DRIcontext *shared,
+ drm_context_t hwContext, void *data)
+{
+ __DRIcontext *pcp;
+ void * const shareCtx = (shared != NULL) ? shared->driverPrivate : NULL;
+
+ pcp = malloc(sizeof *pcp);
+ if (!pcp)
+ return NULL;
+
+ pcp->driScreenPriv = psp;
+ pcp->driDrawablePriv = NULL;
+ pcp->loaderPrivate = data;
+
+ pcp->dri2.draw_stamp = 0;
+ pcp->dri2.read_stamp = 0;
+
+ pcp->hHWContext = hwContext;
+
+ if ( !(*psp->DriverAPI.CreateContext)(API_OPENGL,
+ &config->modes, pcp, shareCtx) ) {
+ free(pcp);
+ return NULL;
+ }
+
+ return pcp;
+}
+
+static unsigned int
+dri2GetAPIMask(__DRIscreen *screen)
+{
+ return screen->api_mask;
+}
+
+static __DRIcontext *
+dri2CreateNewContextForAPI(__DRIscreen *screen, int api,
+ const __DRIconfig *config,
+ __DRIcontext *shared, void *data)
+{
+ __DRIcontext *context;
+ const struct gl_config *modes = (config != NULL) ? &config->modes : NULL;
+ void *shareCtx = (shared != NULL) ? shared->driverPrivate : NULL;
+ gl_api mesa_api;
+
+ if (!(screen->api_mask & (1 << api)))
+ return NULL;
+
+ switch (api) {
+ case __DRI_API_OPENGL:
+ mesa_api = API_OPENGL;
+ break;
+ case __DRI_API_GLES:
+ mesa_api = API_OPENGLES;
+ break;
+ case __DRI_API_GLES2:
+ mesa_api = API_OPENGLES2;
+ break;
+ default:
+ return NULL;
+ }
+
+ context = malloc(sizeof *context);
+ if (!context)
+ return NULL;
+
+ context->driScreenPriv = screen;
+ context->driDrawablePriv = NULL;
+ context->loaderPrivate = data;
+
+ if (!(*screen->DriverAPI.CreateContext)(mesa_api, modes,
+ context, shareCtx) ) {
+ free(context);
+ return NULL;
+ }
+
+ return context;
+}
+
+
+static __DRIcontext *
+dri2CreateNewContext(__DRIscreen *screen, const __DRIconfig *config,
+ __DRIcontext *shared, void *data)
+{
+ return dri2CreateNewContextForAPI(screen, __DRI_API_OPENGL,
+ config, shared, data);
+}
+
+static int
+driCopyContext(__DRIcontext *dest, __DRIcontext *src, unsigned long mask)
+{
+ return GL_FALSE;
+}
+
+/*@}*/
+
+
+/*****************************************************************/
+/** \name Screen handling functions */
+/*****************************************************************/
+/*@{*/
+
+/**
+ * Destroy the per-screen private information.
+ *
+ * \internal
+ * This function calls __DriverAPIRec::DestroyScreen on \p screenPrivate, calls
+ * drmClose(), and finally frees \p screenPrivate.
+ */
+static void driDestroyScreen(__DRIscreen *psp)
+{
+ if (psp) {
+ /* No interaction with the X-server is possible at this point. This
+ * routine is called after XCloseDisplay, so there is no protocol
+ * stream open to the X-server anymore.
+ */
+
+ _mesa_destroy_shader_compiler();
+
+ if (psp->DriverAPI.DestroyScreen)
+ (*psp->DriverAPI.DestroyScreen)(psp);
+
+ if (!psp->dri2.enabled) {
+ (void)drmUnmap((drmAddress)psp->pSAREA, SAREA_MAX);
+ (void)drmUnmap((drmAddress)psp->pFB, psp->fbSize);
+ (void)drmCloseOnce(psp->fd);
+ } else {
+ driDestroyOptionCache(&psp->optionCache);
+ driDestroyOptionInfo(&psp->optionInfo);
+ }
+
+ free(psp);
+ }
+}
+
+static void
+setupLoaderExtensions(__DRIscreen *psp,
+ const __DRIextension **extensions)
+{
+ int i;
+
+ for (i = 0; extensions[i]; i++) {
+ if (strcmp(extensions[i]->name, __DRI_GET_DRAWABLE_INFO) == 0)
+ psp->getDrawableInfo = (__DRIgetDrawableInfoExtension *) extensions[i];
+ if (strcmp(extensions[i]->name, __DRI_DAMAGE) == 0)
+ psp->damage = (__DRIdamageExtension *) extensions[i];
+ if (strcmp(extensions[i]->name, __DRI_SYSTEM_TIME) == 0)
+ psp->systemTime = (__DRIsystemTimeExtension *) extensions[i];
+ if (strcmp(extensions[i]->name, __DRI_DRI2_LOADER) == 0)
+ psp->dri2.loader = (__DRIdri2LoaderExtension *) extensions[i];
+ if (strcmp(extensions[i]->name, __DRI_IMAGE_LOOKUP) == 0)
+ psp->dri2.image = (__DRIimageLookupExtension *) extensions[i];
+ if (strcmp(extensions[i]->name, __DRI_USE_INVALIDATE) == 0)
+ psp->dri2.useInvalidate = (__DRIuseInvalidateExtension *) extensions[i];
+ }
+}
+
+/**
+ * This is the bootstrap function for the driver. libGL supplies all of the
+ * requisite information about the system, and the driver initializes itself.
+ * This routine also fills in the linked list pointed to by \c driver_modes
+ * with the \c struct gl_config that the driver can support for windows or
+ * pbuffers.
+ *
+ * For legacy DRI.
+ *
+ * \param scrn Index of the screen
+ * \param ddx_version Version of the 2D DDX. This may not be meaningful for
+ * all drivers.
+ * \param dri_version Version of the "server-side" DRI.
+ * \param drm_version Version of the kernel DRM.
+ * \param frame_buffer Data describing the location and layout of the
+ * framebuffer.
+ * \param pSAREA Pointer to the SAREA.
+ * \param fd Device handle for the DRM.
+ * \param extensions ??
+ * \param driver_modes Returns modes suppoted by the driver
+ * \param loaderPrivate ??
+ *
+ * \note There is no need to check the minimum API version in this
+ * function. Since the name of this function is versioned, it is
+ * impossible for a loader that is too old to even load this driver.
+ */
+static __DRIscreen *
+driCreateNewScreen(int scrn,
+ const __DRIversion *ddx_version,
+ const __DRIversion *dri_version,
+ const __DRIversion *drm_version,
+ const __DRIframebuffer *frame_buffer,
+ drmAddress pSAREA, int fd,
+ const __DRIextension **extensions,
+ const __DRIconfig ***driver_modes,
+ void *loaderPrivate)
+{
+ static const __DRIextension *emptyExtensionList[] = { NULL };
+ __DRIscreen *psp;
+
+ if (driDriverAPI.InitScreen == NULL)
+ return NULL;
+
+ psp = calloc(1, sizeof *psp);
+ if (!psp)
+ return NULL;
+
+ setupLoaderExtensions(psp, extensions);
+
+ /*
+ ** NOT_DONE: This is used by the X server to detect when the client
+ ** has died while holding the drawable lock. The client sets the
+ ** drawable lock to this value.
+ */
+ psp->drawLockID = 1;
+
+ psp->drm_version = *drm_version;
+ psp->ddx_version = *ddx_version;
+ psp->dri_version = *dri_version;
+
+ psp->pSAREA = pSAREA;
+ psp->lock = (drmLock *) &psp->pSAREA->lock;
+
+ psp->pFB = frame_buffer->base;
+ psp->fbSize = frame_buffer->size;
+ psp->fbStride = frame_buffer->stride;
+ psp->fbWidth = frame_buffer->width;
+ psp->fbHeight = frame_buffer->height;
+ psp->devPrivSize = frame_buffer->dev_priv_size;
+ psp->pDevPriv = frame_buffer->dev_priv;
+ psp->fbBPP = psp->fbStride * 8 / frame_buffer->width;
+
+ psp->extensions = emptyExtensionList;
+ psp->fd = fd;
+ psp->myNum = scrn;
+ psp->dri2.enabled = GL_FALSE;
+
+ psp->DriverAPI = driDriverAPI;
+ psp->api_mask = (1 << __DRI_API_OPENGL);
+
+ *driver_modes = driDriverAPI.InitScreen(psp);
+ if (*driver_modes == NULL) {
+ free(psp);
+ return NULL;
+ }
+
+ return psp;
+}
+
+/**
+ * DRI2
+ */
+static __DRIscreen *
+dri2CreateNewScreen(int scrn, int fd,
+ const __DRIextension **extensions,
+ const __DRIconfig ***driver_configs, void *data)
+{
+ static const __DRIextension *emptyExtensionList[] = { NULL };
+ __DRIscreen *psp;
+ drmVersionPtr version;
+
+ if (driDriverAPI.InitScreen2 == NULL)
+ return NULL;
+
+ psp = calloc(1, sizeof(*psp));
+ if (!psp)
+ return NULL;
+
+ setupLoaderExtensions(psp, extensions);
+
+ version = drmGetVersion(fd);
+ if (version) {
+ psp->drm_version.major = version->version_major;
+ psp->drm_version.minor = version->version_minor;
+ psp->drm_version.patch = version->version_patchlevel;
+ drmFreeVersion(version);
+ }
+
+ psp->extensions = emptyExtensionList;
+ psp->fd = fd;
+ psp->myNum = scrn;
+ psp->dri2.enabled = GL_TRUE;
+
+ psp->DriverAPI = driDriverAPI;
+ psp->api_mask = (1 << __DRI_API_OPENGL);
+ *driver_configs = driDriverAPI.InitScreen2(psp);
+ if (*driver_configs == NULL) {
+ free(psp);
+ return NULL;
+ }
+
+ psp->DriverAPI = driDriverAPI;
+ psp->loaderPrivate = data;
+
+ driParseOptionInfo(&psp->optionInfo, __dri2ConfigOptions,
+ __dri2NConfigOptions);
+ driParseConfigFiles(&psp->optionCache, &psp->optionInfo, psp->myNum,
+ "dri2");
+
+ return psp;
+}
+
+static const __DRIextension **driGetExtensions(__DRIscreen *psp)
+{
+ return psp->extensions;
+}
+
+/** Core interface */
+const __DRIcoreExtension driCoreExtension = {
+ { __DRI_CORE, __DRI_CORE_VERSION },
+ NULL,
+ driDestroyScreen,
+ driGetExtensions,
+ driGetConfigAttrib,
+ driIndexConfigAttrib,
+ NULL,
+ driDestroyDrawable,
+ driSwapBuffers,
+ NULL,
+ driCopyContext,
+ driDestroyContext,
+ driBindContext,
+ driUnbindContext
+};
+
+/** Legacy DRI interface */
+const __DRIlegacyExtension driLegacyExtension = {
+ { __DRI_LEGACY, __DRI_LEGACY_VERSION },
+ driCreateNewScreen,
+ driCreateNewDrawable,
+ driCreateNewContext,
+};
+
+/** DRI2 interface */
+const __DRIdri2Extension driDRI2Extension = {
+ { __DRI_DRI2, __DRI_DRI2_VERSION },
+ dri2CreateNewScreen,
+ dri2CreateNewDrawable,
+ dri2CreateNewContext,
+ dri2GetAPIMask,
+ dri2CreateNewContextForAPI,
+ dri2AllocateBuffer,
+ dri2ReleaseBuffer
+};
+
+const __DRI2configQueryExtension dri2ConfigQueryExtension = {
+ { __DRI2_CONFIG_QUERY, __DRI2_CONFIG_QUERY_VERSION },
+ dri2ConfigQueryb,
+ dri2ConfigQueryi,
+ dri2ConfigQueryf,
+};
+
+/**
+ * Calculate amount of swap interval used between GLX buffer swaps.
+ *
+ * The usage value, on the range [0,max], is the fraction of total swap
+ * interval time used between GLX buffer swaps is calculated.
+ *
+ * \f$p = t_d / (i * t_r)\f$
+ *
+ * Where \f$t_d\f$ is the time since the last GLX buffer swap, \f$i\f$ is the
+ * swap interval (as set by \c glXSwapIntervalSGI), and \f$t_r\f$ time
+ * required for a single vertical refresh period (as returned by \c
+ * glXGetMscRateOML).
+ *
+ * See the documentation for the GLX_MESA_swap_frame_usage extension for more
+ * details.
+ *
+ * \param dPriv Pointer to the private drawable structure.
+ * \return If less than a single swap interval time period was required
+ * between GLX buffer swaps, a number greater than 0 and less than
+ * 1.0 is returned. If exactly one swap interval time period is
+ * required, 1.0 is returned, and if more than one is required then
+ * a number greater than 1.0 will be returned.
+ *
+ * \sa glXSwapIntervalSGI glXGetMscRateOML
+ *
+ * \todo Instead of caching the \c glXGetMscRateOML function pointer, would it
+ * be possible to cache the sync rate?
+ */
+float
+driCalculateSwapUsage( __DRIdrawable *dPriv, int64_t last_swap_ust,
+ int64_t current_ust )
+{
+ int32_t n;
+ int32_t d;
+ int interval;
+ float usage = 1.0;
+ __DRIscreen *psp = dPriv->driScreenPriv;
+
+ if ( (*psp->systemTime->getMSCRate)(dPriv, &n, &d, dPriv->loaderPrivate) ) {
+ interval = (dPriv->swap_interval != 0) ? dPriv->swap_interval : 1;
+
+
+ /* We want to calculate
+ * (current_UST - last_swap_UST) / (interval * us_per_refresh). We get
+ * current_UST by calling __glXGetUST. last_swap_UST is stored in
+ * dPriv->swap_ust. interval has already been calculated.
+ *
+ * The only tricky part is us_per_refresh. us_per_refresh is
+ * 1000000 / MSC_rate. We know the MSC_rate is n / d. We can flip it
+ * around and say us_per_refresh = 1000000 * d / n. Since this goes in
+ * the denominator of the final calculation, we calculate
+ * (interval * 1000000 * d) and move n into the numerator.
+ */
+
+ usage = (current_ust - last_swap_ust);
+ usage *= n;
+ usage /= (interval * d);
+ usage /= 1000000.0;
+ }
+
+ return usage;
+}
+
+void
+dri2InvalidateDrawable(__DRIdrawable *drawable)
+{
+ drawable->dri2.stamp++;
+}
+
+/*@}*/
diff --git a/mesalib/src/mesa/drivers/dri/common/dri_util.h b/mesalib/src/mesa/drivers/dri/common/dri_util.h index 3d3d5c9cd..8d2a38524 100644 --- a/mesalib/src/mesa/drivers/dri/common/dri_util.h +++ b/mesalib/src/mesa/drivers/dri/common/dri_util.h @@ -1,563 +1,563 @@ -/* - * Copyright 1998-1999 Precision Insight, Inc., Cedar Park, Texas. - * All Rights Reserved. - * - * Permission is hereby granted, free of charge, to any person obtaining a - * copy of this software and associated documentation files (the - * "Software"), to deal in the Software without restriction, including - * without limitation the rights to use, copy, modify, merge, publish, - * distribute, sub license, and/or sell copies of the Software, and to - * permit persons to whom the Software is furnished to do so, subject to - * the following conditions: - * - * The above copyright notice and this permission notice (including the - * next paragraph) shall be included in all copies or substantial portions - * of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS - * OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF - * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT. - * IN NO EVENT SHALL PRECISION INSIGHT AND/OR ITS SUPPLIERS BE LIABLE FOR - * ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, - * TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE - * SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. - */ - -/** - * \file dri_util.h - * DRI utility functions definitions. - * - * This module acts as glue between GLX and the actual hardware driver. A DRI - * driver doesn't really \e have to use any of this - it's optional. But, some - * useful stuff is done here that otherwise would have to be duplicated in most - * drivers. - * - * Basically, these utility functions take care of some of the dirty details of - * screen initialization, context creation, context binding, DRM setup, etc. - * - * These functions are compiled into each DRI driver so libGL.so knows nothing - * about them. - * - * \sa dri_util.c. - * - * \author Kevin E. Martin <kevin@precisioninsight.com> - * \author Brian Paul <brian@precisioninsight.com> - */ - -#ifndef _DRI_UTIL_H_ -#define _DRI_UTIL_H_ - -#include <GL/gl.h> -#include <drm.h> -#include <drm_sarea.h> -#include <xf86drm.h> -#include "xmlconfig.h" -#include "main/glheader.h" -#include "main/mtypes.h" -#include "GL/internal/dri_interface.h" - -#define GLX_BAD_CONTEXT 5 - -typedef struct __DRIswapInfoRec __DRIswapInfo; - -/** - * Extensions. - */ -extern const __DRIlegacyExtension driLegacyExtension; -extern const __DRIcoreExtension driCoreExtension; -extern const __DRIdri2Extension driDRI2Extension; -extern const __DRIextension driReadDrawableExtension; -extern const __DRIcopySubBufferExtension driCopySubBufferExtension; -extern const __DRIswapControlExtension driSwapControlExtension; -extern const __DRImediaStreamCounterExtension driMediaStreamCounterExtension; -extern const __DRI2configQueryExtension dri2ConfigQueryExtension; - -/** - * Used by DRI_VALIDATE_DRAWABLE_INFO - */ -#define DRI_VALIDATE_DRAWABLE_INFO_ONCE(pDrawPriv) \ - do { \ - if (*(pDrawPriv->pStamp) != pDrawPriv->lastStamp) { \ - __driUtilUpdateDrawableInfo(pDrawPriv); \ - } \ - } while (0) - - -/** - * Utility macro to validate the drawable information. - * - * See __DRIdrawable::pStamp and __DRIdrawable::lastStamp. - */ -#define DRI_VALIDATE_DRAWABLE_INFO(psp, pdp) \ -do { \ - while (*(pdp->pStamp) != pdp->lastStamp) { \ - register unsigned int hwContext = psp->pSAREA->lock.lock & \ - ~(DRM_LOCK_HELD | DRM_LOCK_CONT); \ - DRM_UNLOCK(psp->fd, &psp->pSAREA->lock, hwContext); \ - \ - DRM_SPINLOCK(&psp->pSAREA->drawable_lock, psp->drawLockID); \ - DRI_VALIDATE_DRAWABLE_INFO_ONCE(pdp); \ - DRM_SPINUNLOCK(&psp->pSAREA->drawable_lock, psp->drawLockID); \ - \ - DRM_LIGHT_LOCK(psp->fd, &psp->pSAREA->lock, hwContext); \ - } \ -} while (0) - -/** - * Same as above, but for two drawables simultaneously. - * - */ - -#define DRI_VALIDATE_TWO_DRAWABLES_INFO(psp, pdp, prp) \ -do { \ - while (*((pdp)->pStamp) != (pdp)->lastStamp || \ - *((prp)->pStamp) != (prp)->lastStamp) { \ - register unsigned int hwContext = (psp)->pSAREA->lock.lock & \ - ~(DRM_LOCK_HELD | DRM_LOCK_CONT); \ - DRM_UNLOCK((psp)->fd, &(psp)->pSAREA->lock, hwContext); \ - \ - DRM_SPINLOCK(&(psp)->pSAREA->drawable_lock, (psp)->drawLockID); \ - DRI_VALIDATE_DRAWABLE_INFO_ONCE(pdp); \ - DRI_VALIDATE_DRAWABLE_INFO_ONCE(prp); \ - DRM_SPINUNLOCK(&(psp)->pSAREA->drawable_lock, (psp)->drawLockID); \ - \ - DRM_LIGHT_LOCK((psp)->fd, &(psp)->pSAREA->lock, hwContext); \ - } \ -} while (0) - - -/** - * Driver callback functions. - * - * Each DRI driver must have one of these structures with all the pointers set - * to appropriate functions within the driver. - * - * When glXCreateContext() is called, for example, it'll call a helper function - * dri_util.c which in turn will jump through the \a CreateContext pointer in - * this structure. - */ -struct __DriverAPIRec { - const __DRIconfig **(*InitScreen) (__DRIscreen * priv); - - /** - * Screen destruction callback - */ - void (*DestroyScreen)(__DRIscreen *driScrnPriv); - - /** - * Context creation callback - */ - GLboolean (*CreateContext)(gl_api api, - const struct gl_config *glVis, - __DRIcontext *driContextPriv, - void *sharedContextPrivate); - - /** - * Context destruction callback - */ - void (*DestroyContext)(__DRIcontext *driContextPriv); - - /** - * Buffer (drawable) creation callback - */ - GLboolean (*CreateBuffer)(__DRIscreen *driScrnPriv, - __DRIdrawable *driDrawPriv, - const struct gl_config *glVis, - GLboolean pixmapBuffer); - - /** - * Buffer (drawable) destruction callback - */ - void (*DestroyBuffer)(__DRIdrawable *driDrawPriv); - - /** - * Buffer swapping callback - */ - void (*SwapBuffers)(__DRIdrawable *driDrawPriv); - - /** - * Context activation callback - */ - GLboolean (*MakeCurrent)(__DRIcontext *driContextPriv, - __DRIdrawable *driDrawPriv, - __DRIdrawable *driReadPriv); - - /** - * Context unbinding callback - */ - GLboolean (*UnbindContext)(__DRIcontext *driContextPriv); - - /** - * Retrieves statistics about buffer swap operations. Required if - * GLX_OML_sync_control or GLX_MESA_swap_frame_usage is supported. - */ - int (*GetSwapInfo)( __DRIdrawable *dPriv, __DRIswapInfo * sInfo ); - - - /** - * These are required if GLX_OML_sync_control is supported. - */ - /*@{*/ - int (*WaitForMSC)( __DRIdrawable *priv, int64_t target_msc, - int64_t divisor, int64_t remainder, - int64_t * msc ); - int (*WaitForSBC)( __DRIdrawable *priv, int64_t target_sbc, - int64_t * msc, int64_t * sbc ); - - int64_t (*SwapBuffersMSC)( __DRIdrawable *priv, int64_t target_msc, - int64_t divisor, int64_t remainder ); - /*@}*/ - void (*CopySubBuffer)(__DRIdrawable *driDrawPriv, - int x, int y, int w, int h); - - /** - * New version of GetMSC so we can pass drawable data to the low - * level DRM driver (e.g. pipe info). Required if - * GLX_SGI_video_sync or GLX_OML_sync_control is supported. - */ - int (*GetDrawableMSC) ( __DRIscreen * priv, - __DRIdrawable *drawablePrivate, - int64_t *count); - - - - /* DRI2 Entry point */ - const __DRIconfig **(*InitScreen2) (__DRIscreen * priv); - - __DRIbuffer *(*AllocateBuffer) (__DRIscreen *screenPrivate, - unsigned int attachment, - unsigned int format, - int width, int height); - void (*ReleaseBuffer) (__DRIscreen *screenPrivate, __DRIbuffer *buffer); -}; - -extern const struct __DriverAPIRec driDriverAPI; - - -struct __DRIswapInfoRec { - /** - * Number of swapBuffers operations that have been *completed*. - */ - uint64_t swap_count; - - /** - * Unadjusted system time of the last buffer swap. This is the time - * when the swap completed, not the time when swapBuffers was called. - */ - int64_t swap_ust; - - /** - * Number of swap operations that occurred after the swap deadline. That - * is if a swap happens more than swap_interval frames after the previous - * swap, it has missed its deadline. If swap_interval is 0, then the - * swap deadline is 1 frame after the previous swap. - */ - uint64_t swap_missed_count; - - /** - * Amount of time used by the last swap that missed its deadline. This - * is calculated as (__glXGetUST() - swap_ust) / (swap_interval * - * time_for_single_vrefresh)). If the actual value of swap_interval is - * 0, then 1 is used instead. If swap_missed_count is non-zero, this - * should be greater-than 1.0. - */ - float swap_missed_usage; -}; - - -/** - * Per-drawable private DRI driver information. - */ -struct __DRIdrawableRec { - /** - * Kernel drawable handle - */ - drm_drawable_t hHWDrawable; - - /** - * Driver's private drawable information. - * - * This structure is opaque. - */ - void *driverPrivate; - - /** - * Private data from the loader. We just hold on to it and pass - * it back when calling into loader provided functions. - */ - void *loaderPrivate; - - /** - * Reference count for number of context's currently bound to this - * drawable. - * - * Once it reaches zero, the drawable can be destroyed. - * - * \note This behavior will change with GLX 1.3. - */ - int refcount; - - /** - * Index of this drawable information in the SAREA. - */ - unsigned int index; - - /** - * Pointer to the "drawable has changed ID" stamp in the SAREA (or - * to dri2.stamp if DRI2 is being used). - */ - unsigned int *pStamp; - - /** - * Last value of the stamp. - * - * If this differs from the value stored at __DRIdrawable::pStamp, - * then the drawable information has been modified by the X server, and the - * drawable information (below) should be retrieved from the X server. - */ - unsigned int lastStamp; - - /** - * \name Drawable - * - * Drawable information used in software fallbacks. - */ - /*@{*/ - int x; - int y; - int w; - int h; - int numClipRects; - drm_clip_rect_t *pClipRects; - /*@}*/ - - /** - * \name Back and depthbuffer - * - * Information about the back and depthbuffer where different from above. - */ - /*@{*/ - int backX; - int backY; - int backClipRectType; - int numBackClipRects; - drm_clip_rect_t *pBackClipRects; - /*@}*/ - - /** - * \name Vertical blank tracking information - * Used for waiting on vertical blank events. - */ - /*@{*/ - unsigned int vblSeq; - unsigned int vblFlags; - /*@}*/ - - /** - * \name Monotonic MSC tracking - * - * Low level driver is responsible for updating msc_base and - * vblSeq values so that higher level code can calculate - * a new msc value or msc target for a WaitMSC call. The new value - * will be: - * msc = msc_base + get_vblank_count() - vblank_base; - * - * And for waiting on a value, core code will use: - * actual_target = target_msc - msc_base + vblank_base; - */ - /*@{*/ - int64_t vblank_base; - int64_t msc_base; - /*@}*/ - - /** - * Pointer to context to which this drawable is currently bound. - */ - __DRIcontext *driContextPriv; - - /** - * Pointer to screen on which this drawable was created. - */ - __DRIscreen *driScreenPriv; - - /** - * Controls swap interval as used by GLX_SGI_swap_control and - * GLX_MESA_swap_control. - */ - unsigned int swap_interval; - - struct { - unsigned int stamp; - drm_clip_rect_t clipRect; - } dri2; -}; - -/** - * Per-context private driver information. - */ -struct __DRIcontextRec { - /** - * Kernel context handle used to access the device lock. - */ - drm_context_t hHWContext; - - /** - * Device driver's private context data. This structure is opaque. - */ - void *driverPrivate; - - /** - * Pointer to drawable currently bound to this context for drawing. - */ - __DRIdrawable *driDrawablePriv; - - /** - * Pointer to drawable currently bound to this context for reading. - */ - __DRIdrawable *driReadablePriv; - - /** - * Pointer to screen on which this context was created. - */ - __DRIscreen *driScreenPriv; - - /** - * The loaders's private context data. This structure is opaque. - */ - void *loaderPrivate; - - struct { - int draw_stamp; - int read_stamp; - } dri2; -}; - -/** - * Per-screen private driver information. - */ -struct __DRIscreenRec { - /** - * Current screen's number - */ - int myNum; - - /** - * Callback functions into the hardware-specific DRI driver code. - */ - struct __DriverAPIRec DriverAPI; - - const __DRIextension **extensions; - /** - * DDX / 2D driver version information. - */ - __DRIversion ddx_version; - - /** - * DRI X extension version information. - */ - __DRIversion dri_version; - - /** - * DRM (kernel module) version information. - */ - __DRIversion drm_version; - - /** - * ID used when the client sets the drawable lock. - * - * The X server uses this value to detect if the client has died while - * holding the drawable lock. - */ - int drawLockID; - - /** - * File descriptor returned when the kernel device driver is opened. - * - * Used to: - * - authenticate client to kernel - * - map the frame buffer, SAREA, etc. - * - close the kernel device driver - */ - int fd; - - /** - * SAREA pointer - * - * Used to access: - * - the device lock - * - the device-independent per-drawable and per-context(?) information - */ - drm_sarea_t *pSAREA; - - /** - * \name Direct frame buffer access information - * Used for software fallbacks. - */ - /*@{*/ - unsigned char *pFB; - int fbSize; - int fbOrigin; - int fbStride; - int fbWidth; - int fbHeight; - int fbBPP; - /*@}*/ - - /** - * \name Device-dependent private information (stored in the SAREA). - * - * This data is accessed by the client driver only. - */ - /*@{*/ - void *pDevPriv; - int devPrivSize; - /*@}*/ - - /** - * Device-dependent private information (not stored in the SAREA). - * - * This pointer is never touched by the DRI layer. - */ -#ifdef __cplusplus - void *priv; -#else - void *private; -#endif - - /* Extensions provided by the loader. */ - const __DRIgetDrawableInfoExtension *getDrawableInfo; - const __DRIsystemTimeExtension *systemTime; - const __DRIdamageExtension *damage; - - struct { - /* Flag to indicate that this is a DRI2 screen. Many of the above - * fields will not be valid or initializaed in that case. */ - int enabled; - __DRIdri2LoaderExtension *loader; - __DRIimageLookupExtension *image; - __DRIuseInvalidateExtension *useInvalidate; - } dri2; - - /* The lock actually in use, old sarea or DRI2 */ - drmLock *lock; - - driOptionCache optionInfo; - driOptionCache optionCache; - unsigned int api_mask; - void *loaderPrivate; -}; - -extern void -__driUtilUpdateDrawableInfo(__DRIdrawable *pdp); - -extern float -driCalculateSwapUsage( __DRIdrawable *dPriv, - int64_t last_swap_ust, int64_t current_ust ); - -extern GLint -driIntersectArea( drm_clip_rect_t rect1, drm_clip_rect_t rect2 ); - -extern void -dri2InvalidateDrawable(__DRIdrawable *drawable); - -#endif /* _DRI_UTIL_H_ */ +/*
+ * Copyright 1998-1999 Precision Insight, Inc., Cedar Park, Texas.
+ * All Rights Reserved.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the
+ * "Software"), to deal in the Software without restriction, including
+ * without limitation the rights to use, copy, modify, merge, publish,
+ * distribute, sub license, and/or sell copies of the Software, and to
+ * permit persons to whom the Software is furnished to do so, subject to
+ * the following conditions:
+ *
+ * The above copyright notice and this permission notice (including the
+ * next paragraph) shall be included in all copies or substantial portions
+ * of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS
+ * OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT.
+ * IN NO EVENT SHALL PRECISION INSIGHT AND/OR ITS SUPPLIERS BE LIABLE FOR
+ * ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT,
+ * TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE
+ * SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/**
+ * \file dri_util.h
+ * DRI utility functions definitions.
+ *
+ * This module acts as glue between GLX and the actual hardware driver. A DRI
+ * driver doesn't really \e have to use any of this - it's optional. But, some
+ * useful stuff is done here that otherwise would have to be duplicated in most
+ * drivers.
+ *
+ * Basically, these utility functions take care of some of the dirty details of
+ * screen initialization, context creation, context binding, DRM setup, etc.
+ *
+ * These functions are compiled into each DRI driver so libGL.so knows nothing
+ * about them.
+ *
+ * \sa dri_util.c.
+ *
+ * \author Kevin E. Martin <kevin@precisioninsight.com>
+ * \author Brian Paul <brian@precisioninsight.com>
+ */
+
+#ifndef _DRI_UTIL_H_
+#define _DRI_UTIL_H_
+
+#include <GL/gl.h>
+#include <drm.h>
+#include <drm_sarea.h>
+#include <xf86drm.h>
+#include "xmlconfig.h"
+#include "main/glheader.h"
+#include "main/mtypes.h"
+#include "GL/internal/dri_interface.h"
+
+#define GLX_BAD_CONTEXT 5
+
+typedef struct __DRIswapInfoRec __DRIswapInfo;
+
+/**
+ * Extensions.
+ */
+extern const __DRIlegacyExtension driLegacyExtension;
+extern const __DRIcoreExtension driCoreExtension;
+extern const __DRIdri2Extension driDRI2Extension;
+extern const __DRIextension driReadDrawableExtension;
+extern const __DRIcopySubBufferExtension driCopySubBufferExtension;
+extern const __DRIswapControlExtension driSwapControlExtension;
+extern const __DRImediaStreamCounterExtension driMediaStreamCounterExtension;
+extern const __DRI2configQueryExtension dri2ConfigQueryExtension;
+
+/**
+ * Used by DRI_VALIDATE_DRAWABLE_INFO
+ */
+#define DRI_VALIDATE_DRAWABLE_INFO_ONCE(pDrawPriv) \
+ do { \
+ if (*(pDrawPriv->pStamp) != pDrawPriv->lastStamp) { \
+ __driUtilUpdateDrawableInfo(pDrawPriv); \
+ } \
+ } while (0)
+
+
+/**
+ * Utility macro to validate the drawable information.
+ *
+ * See __DRIdrawable::pStamp and __DRIdrawable::lastStamp.
+ */
+#define DRI_VALIDATE_DRAWABLE_INFO(psp, pdp) \
+do { \
+ while (*(pdp->pStamp) != pdp->lastStamp) { \
+ register unsigned int hwContext = psp->pSAREA->lock.lock & \
+ ~(DRM_LOCK_HELD | DRM_LOCK_CONT); \
+ DRM_UNLOCK(psp->fd, &psp->pSAREA->lock, hwContext); \
+ \
+ DRM_SPINLOCK(&psp->pSAREA->drawable_lock, psp->drawLockID); \
+ DRI_VALIDATE_DRAWABLE_INFO_ONCE(pdp); \
+ DRM_SPINUNLOCK(&psp->pSAREA->drawable_lock, psp->drawLockID); \
+ \
+ DRM_LIGHT_LOCK(psp->fd, &psp->pSAREA->lock, hwContext); \
+ } \
+} while (0)
+
+/**
+ * Same as above, but for two drawables simultaneously.
+ *
+ */
+
+#define DRI_VALIDATE_TWO_DRAWABLES_INFO(psp, pdp, prp) \
+do { \
+ while (*((pdp)->pStamp) != (pdp)->lastStamp || \
+ *((prp)->pStamp) != (prp)->lastStamp) { \
+ register unsigned int hwContext = (psp)->pSAREA->lock.lock & \
+ ~(DRM_LOCK_HELD | DRM_LOCK_CONT); \
+ DRM_UNLOCK((psp)->fd, &(psp)->pSAREA->lock, hwContext); \
+ \
+ DRM_SPINLOCK(&(psp)->pSAREA->drawable_lock, (psp)->drawLockID); \
+ DRI_VALIDATE_DRAWABLE_INFO_ONCE(pdp); \
+ DRI_VALIDATE_DRAWABLE_INFO_ONCE(prp); \
+ DRM_SPINUNLOCK(&(psp)->pSAREA->drawable_lock, (psp)->drawLockID); \
+ \
+ DRM_LIGHT_LOCK((psp)->fd, &(psp)->pSAREA->lock, hwContext); \
+ } \
+} while (0)
+
+
+/**
+ * Driver callback functions.
+ *
+ * Each DRI driver must have one of these structures with all the pointers set
+ * to appropriate functions within the driver.
+ *
+ * When glXCreateContext() is called, for example, it'll call a helper function
+ * dri_util.c which in turn will jump through the \a CreateContext pointer in
+ * this structure.
+ */
+struct __DriverAPIRec {
+ const __DRIconfig **(*InitScreen) (__DRIscreen * priv);
+
+ /**
+ * Screen destruction callback
+ */
+ void (*DestroyScreen)(__DRIscreen *driScrnPriv);
+
+ /**
+ * Context creation callback
+ */
+ GLboolean (*CreateContext)(gl_api api,
+ const struct gl_config *glVis,
+ __DRIcontext *driContextPriv,
+ void *sharedContextPrivate);
+
+ /**
+ * Context destruction callback
+ */
+ void (*DestroyContext)(__DRIcontext *driContextPriv);
+
+ /**
+ * Buffer (drawable) creation callback
+ */
+ GLboolean (*CreateBuffer)(__DRIscreen *driScrnPriv,
+ __DRIdrawable *driDrawPriv,
+ const struct gl_config *glVis,
+ GLboolean pixmapBuffer);
+
+ /**
+ * Buffer (drawable) destruction callback
+ */
+ void (*DestroyBuffer)(__DRIdrawable *driDrawPriv);
+
+ /**
+ * Buffer swapping callback
+ */
+ void (*SwapBuffers)(__DRIdrawable *driDrawPriv);
+
+ /**
+ * Context activation callback
+ */
+ GLboolean (*MakeCurrent)(__DRIcontext *driContextPriv,
+ __DRIdrawable *driDrawPriv,
+ __DRIdrawable *driReadPriv);
+
+ /**
+ * Context unbinding callback
+ */
+ GLboolean (*UnbindContext)(__DRIcontext *driContextPriv);
+
+ /**
+ * Retrieves statistics about buffer swap operations. Required if
+ * GLX_OML_sync_control or GLX_MESA_swap_frame_usage is supported.
+ */
+ int (*GetSwapInfo)( __DRIdrawable *dPriv, __DRIswapInfo * sInfo );
+
+
+ /**
+ * These are required if GLX_OML_sync_control is supported.
+ */
+ /*@{*/
+ int (*WaitForMSC)( __DRIdrawable *priv, int64_t target_msc,
+ int64_t divisor, int64_t remainder,
+ int64_t * msc );
+ int (*WaitForSBC)( __DRIdrawable *priv, int64_t target_sbc,
+ int64_t * msc, int64_t * sbc );
+
+ int64_t (*SwapBuffersMSC)( __DRIdrawable *priv, int64_t target_msc,
+ int64_t divisor, int64_t remainder );
+ /*@}*/
+ void (*CopySubBuffer)(__DRIdrawable *driDrawPriv,
+ int x, int y, int w, int h);
+
+ /**
+ * New version of GetMSC so we can pass drawable data to the low
+ * level DRM driver (e.g. pipe info). Required if
+ * GLX_SGI_video_sync or GLX_OML_sync_control is supported.
+ */
+ int (*GetDrawableMSC) ( __DRIscreen * priv,
+ __DRIdrawable *drawablePrivate,
+ int64_t *count);
+
+
+
+ /* DRI2 Entry point */
+ const __DRIconfig **(*InitScreen2) (__DRIscreen * priv);
+
+ __DRIbuffer *(*AllocateBuffer) (__DRIscreen *screenPrivate,
+ unsigned int attachment,
+ unsigned int format,
+ int width, int height);
+ void (*ReleaseBuffer) (__DRIscreen *screenPrivate, __DRIbuffer *buffer);
+};
+
+extern const struct __DriverAPIRec driDriverAPI;
+
+
+struct __DRIswapInfoRec {
+ /**
+ * Number of swapBuffers operations that have been *completed*.
+ */
+ uint64_t swap_count;
+
+ /**
+ * Unadjusted system time of the last buffer swap. This is the time
+ * when the swap completed, not the time when swapBuffers was called.
+ */
+ int64_t swap_ust;
+
+ /**
+ * Number of swap operations that occurred after the swap deadline. That
+ * is if a swap happens more than swap_interval frames after the previous
+ * swap, it has missed its deadline. If swap_interval is 0, then the
+ * swap deadline is 1 frame after the previous swap.
+ */
+ uint64_t swap_missed_count;
+
+ /**
+ * Amount of time used by the last swap that missed its deadline. This
+ * is calculated as (__glXGetUST() - swap_ust) / (swap_interval *
+ * time_for_single_vrefresh)). If the actual value of swap_interval is
+ * 0, then 1 is used instead. If swap_missed_count is non-zero, this
+ * should be greater-than 1.0.
+ */
+ float swap_missed_usage;
+};
+
+
+/**
+ * Per-drawable private DRI driver information.
+ */
+struct __DRIdrawableRec {
+ /**
+ * Kernel drawable handle
+ */
+ drm_drawable_t hHWDrawable;
+
+ /**
+ * Driver's private drawable information.
+ *
+ * This structure is opaque.
+ */
+ void *driverPrivate;
+
+ /**
+ * Private data from the loader. We just hold on to it and pass
+ * it back when calling into loader provided functions.
+ */
+ void *loaderPrivate;
+
+ /**
+ * Reference count for number of context's currently bound to this
+ * drawable.
+ *
+ * Once it reaches zero, the drawable can be destroyed.
+ *
+ * \note This behavior will change with GLX 1.3.
+ */
+ int refcount;
+
+ /**
+ * Index of this drawable information in the SAREA.
+ */
+ unsigned int index;
+
+ /**
+ * Pointer to the "drawable has changed ID" stamp in the SAREA (or
+ * to dri2.stamp if DRI2 is being used).
+ */
+ unsigned int *pStamp;
+
+ /**
+ * Last value of the stamp.
+ *
+ * If this differs from the value stored at __DRIdrawable::pStamp,
+ * then the drawable information has been modified by the X server, and the
+ * drawable information (below) should be retrieved from the X server.
+ */
+ unsigned int lastStamp;
+
+ /**
+ * \name Drawable
+ *
+ * Drawable information used in software fallbacks.
+ */
+ /*@{*/
+ int x;
+ int y;
+ int w;
+ int h;
+ int numClipRects;
+ drm_clip_rect_t *pClipRects;
+ /*@}*/
+
+ /**
+ * \name Back and depthbuffer
+ *
+ * Information about the back and depthbuffer where different from above.
+ */
+ /*@{*/
+ int backX;
+ int backY;
+ int backClipRectType;
+ int numBackClipRects;
+ drm_clip_rect_t *pBackClipRects;
+ /*@}*/
+
+ /**
+ * \name Vertical blank tracking information
+ * Used for waiting on vertical blank events.
+ */
+ /*@{*/
+ unsigned int vblSeq;
+ unsigned int vblFlags;
+ /*@}*/
+
+ /**
+ * \name Monotonic MSC tracking
+ *
+ * Low level driver is responsible for updating msc_base and
+ * vblSeq values so that higher level code can calculate
+ * a new msc value or msc target for a WaitMSC call. The new value
+ * will be:
+ * msc = msc_base + get_vblank_count() - vblank_base;
+ *
+ * And for waiting on a value, core code will use:
+ * actual_target = target_msc - msc_base + vblank_base;
+ */
+ /*@{*/
+ int64_t vblank_base;
+ int64_t msc_base;
+ /*@}*/
+
+ /**
+ * Pointer to context to which this drawable is currently bound.
+ */
+ __DRIcontext *driContextPriv;
+
+ /**
+ * Pointer to screen on which this drawable was created.
+ */
+ __DRIscreen *driScreenPriv;
+
+ /**
+ * Controls swap interval as used by GLX_SGI_swap_control and
+ * GLX_MESA_swap_control.
+ */
+ unsigned int swap_interval;
+
+ struct {
+ unsigned int stamp;
+ drm_clip_rect_t clipRect;
+ } dri2;
+};
+
+/**
+ * Per-context private driver information.
+ */
+struct __DRIcontextRec {
+ /**
+ * Kernel context handle used to access the device lock.
+ */
+ drm_context_t hHWContext;
+
+ /**
+ * Device driver's private context data. This structure is opaque.
+ */
+ void *driverPrivate;
+
+ /**
+ * Pointer to drawable currently bound to this context for drawing.
+ */
+ __DRIdrawable *driDrawablePriv;
+
+ /**
+ * Pointer to drawable currently bound to this context for reading.
+ */
+ __DRIdrawable *driReadablePriv;
+
+ /**
+ * Pointer to screen on which this context was created.
+ */
+ __DRIscreen *driScreenPriv;
+
+ /**
+ * The loaders's private context data. This structure is opaque.
+ */
+ void *loaderPrivate;
+
+ struct {
+ int draw_stamp;
+ int read_stamp;
+ } dri2;
+};
+
+/**
+ * Per-screen private driver information.
+ */
+struct __DRIscreenRec {
+ /**
+ * Current screen's number
+ */
+ int myNum;
+
+ /**
+ * Callback functions into the hardware-specific DRI driver code.
+ */
+ struct __DriverAPIRec DriverAPI;
+
+ const __DRIextension **extensions;
+ /**
+ * DDX / 2D driver version information.
+ */
+ __DRIversion ddx_version;
+
+ /**
+ * DRI X extension version information.
+ */
+ __DRIversion dri_version;
+
+ /**
+ * DRM (kernel module) version information.
+ */
+ __DRIversion drm_version;
+
+ /**
+ * ID used when the client sets the drawable lock.
+ *
+ * The X server uses this value to detect if the client has died while
+ * holding the drawable lock.
+ */
+ int drawLockID;
+
+ /**
+ * File descriptor returned when the kernel device driver is opened.
+ *
+ * Used to:
+ * - authenticate client to kernel
+ * - map the frame buffer, SAREA, etc.
+ * - close the kernel device driver
+ */
+ int fd;
+
+ /**
+ * SAREA pointer
+ *
+ * Used to access:
+ * - the device lock
+ * - the device-independent per-drawable and per-context(?) information
+ */
+ drm_sarea_t *pSAREA;
+
+ /**
+ * \name Direct frame buffer access information
+ * Used for software fallbacks.
+ */
+ /*@{*/
+ unsigned char *pFB;
+ int fbSize;
+ int fbOrigin;
+ int fbStride;
+ int fbWidth;
+ int fbHeight;
+ int fbBPP;
+ /*@}*/
+
+ /**
+ * \name Device-dependent private information (stored in the SAREA).
+ *
+ * This data is accessed by the client driver only.
+ */
+ /*@{*/
+ void *pDevPriv;
+ int devPrivSize;
+ /*@}*/
+
+ /**
+ * Device-dependent private information (not stored in the SAREA).
+ *
+ * This pointer is never touched by the DRI layer.
+ */
+#ifdef __cplusplus
+ void *priv;
+#else
+ void *private;
+#endif
+
+ /* Extensions provided by the loader. */
+ const __DRIgetDrawableInfoExtension *getDrawableInfo;
+ const __DRIsystemTimeExtension *systemTime;
+ const __DRIdamageExtension *damage;
+
+ struct {
+ /* Flag to indicate that this is a DRI2 screen. Many of the above
+ * fields will not be valid or initializaed in that case. */
+ int enabled;
+ __DRIdri2LoaderExtension *loader;
+ __DRIimageLookupExtension *image;
+ __DRIuseInvalidateExtension *useInvalidate;
+ } dri2;
+
+ /* The lock actually in use, old sarea or DRI2 */
+ drmLock *lock;
+
+ driOptionCache optionInfo;
+ driOptionCache optionCache;
+ unsigned int api_mask;
+ void *loaderPrivate;
+};
+
+extern void
+__driUtilUpdateDrawableInfo(__DRIdrawable *pdp);
+
+extern float
+driCalculateSwapUsage( __DRIdrawable *dPriv,
+ int64_t last_swap_ust, int64_t current_ust );
+
+extern GLint
+driIntersectArea( drm_clip_rect_t rect1, drm_clip_rect_t rect2 );
+
+extern void
+dri2InvalidateDrawable(__DRIdrawable *drawable);
+
+#endif /* _DRI_UTIL_H_ */
diff --git a/mesalib/src/mesa/drivers/dri/common/utils.c b/mesalib/src/mesa/drivers/dri/common/utils.c index 083edfaa9..a36f65da4 100644 --- a/mesalib/src/mesa/drivers/dri/common/utils.c +++ b/mesalib/src/mesa/drivers/dri/common/utils.c @@ -1,824 +1,826 @@ -/* - * (C) Copyright IBM Corporation 2002, 2004 - * All Rights Reserved. - * - * Permission is hereby granted, free of charge, to any person obtaining a - * copy of this software and associated documentation files (the "Software"), - * to deal in the Software without restriction, including without limitation - * on the rights to use, copy, modify, merge, publish, distribute, sub - * license, and/or sell copies of the Software, and to permit persons to whom - * the Software is furnished to do so, subject to the following conditions: - * - * The above copyright notice and this permission notice (including the next - * paragraph) shall be included in all copies or substantial portions of the - * Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR - * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, - * FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT. IN NO EVENT SHALL - * VA LINUX SYSTEM, IBM AND/OR THEIR SUPPLIERS BE LIABLE FOR ANY CLAIM, - * DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR - * OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE - * USE OR OTHER DEALINGS IN THE SOFTWARE. - */ - -/** - * \file utils.c - * Utility functions for DRI drivers. - * - * \author Ian Romanick <idr@us.ibm.com> - */ - -#include <string.h> -#include <stdlib.h> -#include "main/mtypes.h" -#include "main/cpuinfo.h" -#include "main/extensions.h" -#include "utils.h" - - -/** - * Print message to \c stderr if the \c LIBGL_DEBUG environment variable - * is set. - * - * Is called from the drivers. - * - * \param f \c printf like format string. - */ -void -__driUtilMessage(const char *f, ...) -{ - va_list args; - - if (getenv("LIBGL_DEBUG")) { - fprintf(stderr, "libGL: "); - va_start(args, f); - vfprintf(stderr, f, args); - va_end(args); - fprintf(stderr, "\n"); - } -} - - -unsigned -driParseDebugString( const char * debug, - const struct dri_debug_control * control ) -{ - unsigned flag; - - - flag = 0; - if ( debug != NULL ) { - while( control->string != NULL ) { - if ( !strcmp( debug, "all" ) || - strstr( debug, control->string ) != NULL ) { - flag |= control->flag; - } - - control++; - } - } - - return flag; -} - - - -/** - * Create the \c GL_RENDERER string for DRI drivers. - * - * Almost all DRI drivers use a \c GL_RENDERER string of the form: - * - * "Mesa DRI <chip> <driver date> <AGP speed) <CPU information>" - * - * Using the supplied chip name, driver data, and AGP speed, this function - * creates the string. - * - * \param buffer Buffer to hold the \c GL_RENDERER string. - * \param hardware_name Name of the hardware. - * \param driver_date Driver date. - * \param agp_mode AGP mode (speed). - * - * \returns - * The length of the string stored in \c buffer. This does \b not include - * the terminating \c NUL character. - */ -unsigned -driGetRendererString( char * buffer, const char * hardware_name, - const char * driver_date, GLuint agp_mode ) -{ - unsigned offset; - char *cpu; - - offset = sprintf( buffer, "Mesa DRI %s %s", hardware_name, driver_date ); - - /* Append any AGP-specific information. - */ - switch ( agp_mode ) { - case 1: - case 2: - case 4: - case 8: - offset += sprintf( & buffer[ offset ], " AGP %ux", agp_mode ); - break; - - default: - break; - } - - /* Append any CPU-specific information. - */ - cpu = _mesa_get_cpu_string(); - if (cpu) { - offset += sprintf(buffer + offset, " %s", cpu); - free(cpu); - } - - return offset; -} - - - - -#define need_GL_ARB_copy_buffer -#define need_GL_ARB_draw_buffers -#define need_GL_ARB_multisample -#define need_GL_ARB_texture_compression -#define need_GL_ARB_transpose_matrix -#define need_GL_ARB_vertex_buffer_object -#define need_GL_ARB_window_pos -#define need_GL_EXT_compiled_vertex_array -#define need_GL_EXT_multi_draw_arrays -#define need_GL_EXT_polygon_offset -#define need_GL_EXT_texture_object -#define need_GL_EXT_vertex_array -#define need_GL_IBM_multimode_draw_arrays -#define need_GL_MESA_window_pos - -/* These are needed in *all* drivers because Mesa internally implements - * certain functionality in terms of functions provided by these extensions. - * For example, glBlendFunc is implemented by calling glBlendFuncSeparateEXT. - */ -#define need_GL_EXT_blend_func_separate -#define need_GL_NV_vertex_program - -#include "main/remap_helper.h" - -static const struct dri_extension all_mesa_extensions[] = { - { "GL_ARB_copy_buffer", GL_ARB_copy_buffer_functions }, - { "GL_ARB_draw_buffers", GL_ARB_draw_buffers_functions }, - { "GL_ARB_multisample", GL_ARB_multisample_functions }, - { "GL_ARB_texture_compression", GL_ARB_texture_compression_functions }, - { "GL_ARB_transpose_matrix", GL_ARB_transpose_matrix_functions }, - { "GL_ARB_vertex_buffer_object", GL_ARB_vertex_buffer_object_functions}, - { "GL_ARB_window_pos", GL_ARB_window_pos_functions }, - { "GL_EXT_blend_func_separate", GL_EXT_blend_func_separate_functions }, - { "GL_EXT_compiled_vertex_array", GL_EXT_compiled_vertex_array_functions }, - { "GL_EXT_multi_draw_arrays", GL_EXT_multi_draw_arrays_functions }, - { "GL_EXT_polygon_offset", GL_EXT_polygon_offset_functions }, - { "GL_EXT_texture_object", GL_EXT_texture_object_functions }, - { "GL_EXT_vertex_array", GL_EXT_vertex_array_functions }, - { "GL_IBM_multimode_draw_arrays", GL_IBM_multimode_draw_arrays_functions }, - { "GL_MESA_window_pos", GL_MESA_window_pos_functions }, - { "GL_NV_vertex_program", GL_NV_vertex_program_functions }, - { NULL, NULL } -}; - - -/** - * Enable and map extensions supported by the driver. - * - * When ctx is NULL, extensions are not enabled, but their functions - * are still mapped. When extensions_to_enable is NULL, all static - * functions known to mesa core are mapped. - * - * \bug - * ARB_imaging isn't handled properly. In Mesa, enabling ARB_imaging also - * enables all the sub-extensions that are folded into it. This means that - * we need to add entry-points (via \c driInitSingleExtension) for those - * new functions here. - */ -void driInitExtensions( struct gl_context * ctx, - const struct dri_extension * extensions_to_enable, - GLboolean enable_imaging ) -{ - static int first_time = 1; - unsigned i; - - if ( first_time ) { - first_time = 0; - driInitExtensions( NULL, all_mesa_extensions, GL_FALSE ); - } - - if ( (ctx != NULL) && enable_imaging ) { - _mesa_enable_imaging_extensions( ctx ); - } - - /* The caller is too lazy to list any extension */ - if ( extensions_to_enable == NULL ) { - /* Map the static functions. Together with those mapped by remap - * table, this should cover everything mesa core knows. - */ - _mesa_map_static_functions(); - return; - } - - for ( i = 0 ; extensions_to_enable[i].name != NULL ; i++ ) { - driInitSingleExtension( ctx, & extensions_to_enable[i] ); - } -} - - - - -/** - * Enable and map functions for a single extension - * - * \param ctx Context where extension is to be enabled. - * \param ext Extension that is to be enabled. - * - * \sa driInitExtensions, _mesa_enable_extension, _mesa_map_function_array - */ -void driInitSingleExtension( struct gl_context * ctx, - const struct dri_extension * ext ) -{ - if ( ext->functions != NULL ) { - _mesa_map_function_array(ext->functions); - } - - if ( ctx != NULL ) { - _mesa_enable_extension( ctx, ext->name ); - } -} - - -/** - * Utility function used by drivers to test the verions of other components. - * - * \param driver_name Name of the driver. Used in error messages. - * \param driActual Actual DRI version supplied __driCreateNewScreen. - * \param driExpected Minimum DRI version required by the driver. - * \param ddxActual Actual DDX version supplied __driCreateNewScreen. - * \param ddxExpected Minimum DDX minor and range of DDX major version required by the driver. - * \param drmActual Actual DRM version supplied __driCreateNewScreen. - * \param drmExpected Minimum DRM version required by the driver. - * - * \returns \c GL_TRUE if all version requirements are met. Otherwise, - * \c GL_FALSE is returned. - * - * \sa __driCreateNewScreen, driCheckDriDdxDrmVersions2 - * - * \todo - * Now that the old \c driCheckDriDdxDrmVersions function is gone, this - * function and \c driCheckDriDdxDrmVersions2 should be renamed. - */ -GLboolean -driCheckDriDdxDrmVersions3(const char * driver_name, - const __DRIversion * driActual, - const __DRIversion * driExpected, - const __DRIversion * ddxActual, - const __DRIutilversion2 * ddxExpected, - const __DRIversion * drmActual, - const __DRIversion * drmExpected) -{ - static const char format[] = "%s DRI driver expected %s version %d.%d.x " - "but got version %d.%d.%d\n"; - static const char format2[] = "%s DRI driver expected %s version %d-%d.%d.x " - "but got version %d.%d.%d\n"; - - - /* Check the DRI version */ - if ( (driActual->major != driExpected->major) - || (driActual->minor < driExpected->minor) ) { - fprintf(stderr, format, driver_name, "DRI", - driExpected->major, driExpected->minor, - driActual->major, driActual->minor, driActual->patch); - return GL_FALSE; - } - - /* Check that the DDX driver version is compatible */ - if ( (ddxActual->major < ddxExpected->major_min) - || (ddxActual->major > ddxExpected->major_max) - || (ddxActual->minor < ddxExpected->minor) ) { - fprintf(stderr, format2, driver_name, "DDX", - ddxExpected->major_min, ddxExpected->major_max, ddxExpected->minor, - ddxActual->major, ddxActual->minor, ddxActual->patch); - return GL_FALSE; - } - - /* Check that the DRM driver version is compatible */ - if ( (drmActual->major != drmExpected->major) - || (drmActual->minor < drmExpected->minor) ) { - fprintf(stderr, format, driver_name, "DRM", - drmExpected->major, drmExpected->minor, - drmActual->major, drmActual->minor, drmActual->patch); - return GL_FALSE; - } - - return GL_TRUE; -} - -GLboolean -driCheckDriDdxDrmVersions2(const char * driver_name, - const __DRIversion * driActual, - const __DRIversion * driExpected, - const __DRIversion * ddxActual, - const __DRIversion * ddxExpected, - const __DRIversion * drmActual, - const __DRIversion * drmExpected) -{ - __DRIutilversion2 ddx_expected; - ddx_expected.major_min = ddxExpected->major; - ddx_expected.major_max = ddxExpected->major; - ddx_expected.minor = ddxExpected->minor; - ddx_expected.patch = ddxExpected->patch; - return driCheckDriDdxDrmVersions3(driver_name, driActual, - driExpected, ddxActual, & ddx_expected, - drmActual, drmExpected); -} - -GLboolean driClipRectToFramebuffer( const struct gl_framebuffer *buffer, - GLint *x, GLint *y, - GLsizei *width, GLsizei *height ) -{ - /* left clipping */ - if (*x < buffer->_Xmin) { - *width -= (buffer->_Xmin - *x); - *x = buffer->_Xmin; - } - - /* right clipping */ - if (*x + *width > buffer->_Xmax) - *width -= (*x + *width - buffer->_Xmax - 1); - - if (*width <= 0) - return GL_FALSE; - - /* bottom clipping */ - if (*y < buffer->_Ymin) { - *height -= (buffer->_Ymin - *y); - *y = buffer->_Ymin; - } - - /* top clipping */ - if (*y + *height > buffer->_Ymax) - *height -= (*y + *height - buffer->_Ymax - 1); - - if (*height <= 0) - return GL_FALSE; - - return GL_TRUE; -} - -/** - * Creates a set of \c struct gl_config that a driver will expose. - * - * A set of \c struct gl_config will be created based on the supplied - * parameters. The number of modes processed will be 2 * - * \c num_depth_stencil_bits * \c num_db_modes. - * - * For the most part, data is just copied from \c depth_bits, \c stencil_bits, - * \c db_modes, and \c visType into each \c struct gl_config element. - * However, the meanings of \c fb_format and \c fb_type require further - * explanation. The \c fb_format specifies which color components are in - * each pixel and what the default order is. For example, \c GL_RGB specifies - * that red, green, blue are available and red is in the "most significant" - * position and blue is in the "least significant". The \c fb_type specifies - * the bit sizes of each component and the actual ordering. For example, if - * \c GL_UNSIGNED_SHORT_5_6_5_REV is specified with \c GL_RGB, bits [15:11] - * are the blue value, bits [10:5] are the green value, and bits [4:0] are - * the red value. - * - * One sublte issue is the combination of \c GL_RGB or \c GL_BGR and either - * of the \c GL_UNSIGNED_INT_8_8_8_8 modes. The resulting mask values in the - * \c struct gl_config structure is \b identical to the \c GL_RGBA or - * \c GL_BGRA case, except the \c alphaMask is zero. This means that, as - * far as this routine is concerned, \c GL_RGB with \c GL_UNSIGNED_INT_8_8_8_8 - * still uses 32-bits. - * - * If in doubt, look at the tables used in the function. - * - * \param ptr_to_modes Pointer to a pointer to a linked list of - * \c struct gl_config. Upon completion, a pointer to - * the next element to be process will be stored here. - * If the function fails and returns \c GL_FALSE, this - * value will be unmodified, but some elements in the - * linked list may be modified. - * \param fb_format Format of the framebuffer. Currently only \c GL_RGB, - * \c GL_RGBA, \c GL_BGR, and \c GL_BGRA are supported. - * \param fb_type Type of the pixels in the framebuffer. Currently only - * \c GL_UNSIGNED_SHORT_5_6_5, - * \c GL_UNSIGNED_SHORT_5_6_5_REV, - * \c GL_UNSIGNED_INT_8_8_8_8, and - * \c GL_UNSIGNED_INT_8_8_8_8_REV are supported. - * \param depth_bits Array of depth buffer sizes to be exposed. - * \param stencil_bits Array of stencil buffer sizes to be exposed. - * \param num_depth_stencil_bits Number of entries in both \c depth_bits and - * \c stencil_bits. - * \param db_modes Array of buffer swap modes. If an element has a - * value of \c GLX_NONE, then it represents a - * single-buffered mode. Other valid values are - * \c GLX_SWAP_EXCHANGE_OML, \c GLX_SWAP_COPY_OML, and - * \c GLX_SWAP_UNDEFINED_OML. See the - * GLX_OML_swap_method extension spec for more details. - * \param num_db_modes Number of entries in \c db_modes. - * \param msaa_samples Array of msaa sample count. 0 represents a visual - * without a multisample buffer. - * \param num_msaa_modes Number of entries in \c msaa_samples. - * \param visType GLX visual type. Usually either \c GLX_TRUE_COLOR or - * \c GLX_DIRECT_COLOR. - * - * \returns - * \c GL_TRUE on success or \c GL_FALSE on failure. Currently the only - * cause of failure is a bad parameter (i.e., unsupported \c fb_format or - * \c fb_type). - * - * \todo - * There is currently no way to support packed RGB modes (i.e., modes with - * exactly 3 bytes per pixel) or floating-point modes. This could probably - * be done by creating some new, private enums with clever names likes - * \c GL_UNSIGNED_3BYTE_8_8_8, \c GL_4FLOAT_32_32_32_32, - * \c GL_4HALF_16_16_16_16, etc. We can cross that bridge when we come to it. - */ -__DRIconfig ** -driCreateConfigs(GLenum fb_format, GLenum fb_type, - const uint8_t * depth_bits, const uint8_t * stencil_bits, - unsigned num_depth_stencil_bits, - const GLenum * db_modes, unsigned num_db_modes, - const uint8_t * msaa_samples, unsigned num_msaa_modes, - GLboolean enable_accum) -{ - static const uint8_t bits_table[4][4] = { - /* R G B A */ - { 3, 3, 2, 0 }, /* Any GL_UNSIGNED_BYTE_3_3_2 */ - { 5, 6, 5, 0 }, /* Any GL_UNSIGNED_SHORT_5_6_5 */ - { 8, 8, 8, 0 }, /* Any RGB with any GL_UNSIGNED_INT_8_8_8_8 */ - { 8, 8, 8, 8 } /* Any RGBA with any GL_UNSIGNED_INT_8_8_8_8 */ - }; - - static const uint32_t masks_table_rgb[6][4] = { - { 0x000000E0, 0x0000001C, 0x00000003, 0x00000000 }, /* 3_3_2 */ - { 0x00000007, 0x00000038, 0x000000C0, 0x00000000 }, /* 2_3_3_REV */ - { 0x0000F800, 0x000007E0, 0x0000001F, 0x00000000 }, /* 5_6_5 */ - { 0x0000001F, 0x000007E0, 0x0000F800, 0x00000000 }, /* 5_6_5_REV */ - { 0xFF000000, 0x00FF0000, 0x0000FF00, 0x00000000 }, /* 8_8_8_8 */ - { 0x000000FF, 0x0000FF00, 0x00FF0000, 0x00000000 } /* 8_8_8_8_REV */ - }; - - static const uint32_t masks_table_rgba[6][4] = { - { 0x000000E0, 0x0000001C, 0x00000003, 0x00000000 }, /* 3_3_2 */ - { 0x00000007, 0x00000038, 0x000000C0, 0x00000000 }, /* 2_3_3_REV */ - { 0x0000F800, 0x000007E0, 0x0000001F, 0x00000000 }, /* 5_6_5 */ - { 0x0000001F, 0x000007E0, 0x0000F800, 0x00000000 }, /* 5_6_5_REV */ - { 0xFF000000, 0x00FF0000, 0x0000FF00, 0x000000FF }, /* 8_8_8_8 */ - { 0x000000FF, 0x0000FF00, 0x00FF0000, 0xFF000000 }, /* 8_8_8_8_REV */ - }; - - static const uint32_t masks_table_bgr[6][4] = { - { 0x00000007, 0x00000038, 0x000000C0, 0x00000000 }, /* 3_3_2 */ - { 0x000000E0, 0x0000001C, 0x00000003, 0x00000000 }, /* 2_3_3_REV */ - { 0x0000001F, 0x000007E0, 0x0000F800, 0x00000000 }, /* 5_6_5 */ - { 0x0000F800, 0x000007E0, 0x0000001F, 0x00000000 }, /* 5_6_5_REV */ - { 0x0000FF00, 0x00FF0000, 0xFF000000, 0x00000000 }, /* 8_8_8_8 */ - { 0x00FF0000, 0x0000FF00, 0x000000FF, 0x00000000 }, /* 8_8_8_8_REV */ - }; - - static const uint32_t masks_table_bgra[6][4] = { - { 0x00000007, 0x00000038, 0x000000C0, 0x00000000 }, /* 3_3_2 */ - { 0x000000E0, 0x0000001C, 0x00000003, 0x00000000 }, /* 2_3_3_REV */ - { 0x0000001F, 0x000007E0, 0x0000F800, 0x00000000 }, /* 5_6_5 */ - { 0x0000F800, 0x000007E0, 0x0000001F, 0x00000000 }, /* 5_6_5_REV */ - { 0x0000FF00, 0x00FF0000, 0xFF000000, 0x000000FF }, /* 8_8_8_8 */ - { 0x00FF0000, 0x0000FF00, 0x000000FF, 0xFF000000 }, /* 8_8_8_8_REV */ - }; - - static const uint8_t bytes_per_pixel[6] = { - 1, /* 3_3_2 */ - 1, /* 2_3_3_REV */ - 2, /* 5_6_5 */ - 2, /* 5_6_5_REV */ - 4, /* 8_8_8_8 */ - 4 /* 8_8_8_8_REV */ - }; - - const uint8_t * bits; - const uint32_t * masks; - int index; - __DRIconfig **configs, **c; - struct gl_config *modes; - unsigned i, j, k, h; - unsigned num_modes; - unsigned num_accum_bits = (enable_accum) ? 2 : 1; - - switch ( fb_type ) { - case GL_UNSIGNED_BYTE_3_3_2: - index = 0; - break; - case GL_UNSIGNED_BYTE_2_3_3_REV: - index = 1; - break; - case GL_UNSIGNED_SHORT_5_6_5: - index = 2; - break; - case GL_UNSIGNED_SHORT_5_6_5_REV: - index = 3; - break; - case GL_UNSIGNED_INT_8_8_8_8: - index = 4; - break; - case GL_UNSIGNED_INT_8_8_8_8_REV: - index = 5; - break; - default: - fprintf( stderr, "[%s:%u] Unknown framebuffer type 0x%04x.\n", - __FUNCTION__, __LINE__, fb_type ); - return NULL; - } - - - /* Valid types are GL_UNSIGNED_SHORT_5_6_5 and GL_UNSIGNED_INT_8_8_8_8 and - * the _REV versions. - * - * Valid formats are GL_RGBA, GL_RGB, and GL_BGRA. - */ - - switch ( fb_format ) { - case GL_RGB: - masks = masks_table_rgb[ index ]; - break; - - case GL_RGBA: - masks = masks_table_rgba[ index ]; - break; - - case GL_BGR: - masks = masks_table_bgr[ index ]; - break; - - case GL_BGRA: - masks = masks_table_bgra[ index ]; - break; - - default: - fprintf( stderr, "[%s:%u] Unknown framebuffer format 0x%04x.\n", - __FUNCTION__, __LINE__, fb_format ); - return NULL; - } - - switch ( bytes_per_pixel[ index ] ) { - case 1: - bits = bits_table[0]; - break; - case 2: - bits = bits_table[1]; - break; - default: - bits = ((fb_format == GL_RGB) || (fb_format == GL_BGR)) - ? bits_table[2] - : bits_table[3]; - break; - } - - num_modes = num_depth_stencil_bits * num_db_modes * num_accum_bits * num_msaa_modes; - configs = calloc(1, (num_modes + 1) * sizeof *configs); - if (configs == NULL) - return NULL; - - c = configs; - for ( k = 0 ; k < num_depth_stencil_bits ; k++ ) { - for ( i = 0 ; i < num_db_modes ; i++ ) { - for ( h = 0 ; h < num_msaa_modes; h++ ) { - for ( j = 0 ; j < num_accum_bits ; j++ ) { - *c = malloc (sizeof **c); - modes = &(*c)->modes; - c++; - - memset(modes, 0, sizeof *modes); - modes->redBits = bits[0]; - modes->greenBits = bits[1]; - modes->blueBits = bits[2]; - modes->alphaBits = bits[3]; - modes->redMask = masks[0]; - modes->greenMask = masks[1]; - modes->blueMask = masks[2]; - modes->alphaMask = masks[3]; - modes->rgbBits = modes->redBits + modes->greenBits - + modes->blueBits + modes->alphaBits; - - modes->accumRedBits = 16 * j; - modes->accumGreenBits = 16 * j; - modes->accumBlueBits = 16 * j; - modes->accumAlphaBits = (masks[3] != 0) ? 16 * j : 0; - modes->visualRating = (j == 0) ? GLX_NONE : GLX_SLOW_CONFIG; - - modes->stencilBits = stencil_bits[k]; - modes->depthBits = depth_bits[k]; - - modes->transparentPixel = GLX_NONE; - modes->transparentRed = GLX_DONT_CARE; - modes->transparentGreen = GLX_DONT_CARE; - modes->transparentBlue = GLX_DONT_CARE; - modes->transparentAlpha = GLX_DONT_CARE; - modes->transparentIndex = GLX_DONT_CARE; - modes->rgbMode = GL_TRUE; - - if ( db_modes[i] == GLX_NONE ) { - modes->doubleBufferMode = GL_FALSE; - } - else { - modes->doubleBufferMode = GL_TRUE; - modes->swapMethod = db_modes[i]; - } - - modes->samples = msaa_samples[h]; - modes->sampleBuffers = modes->samples ? 1 : 0; - - - modes->haveAccumBuffer = ((modes->accumRedBits + - modes->accumGreenBits + - modes->accumBlueBits + - modes->accumAlphaBits) > 0); - modes->haveDepthBuffer = (modes->depthBits > 0); - modes->haveStencilBuffer = (modes->stencilBits > 0); - - modes->bindToTextureRgb = GL_TRUE; - modes->bindToTextureRgba = GL_TRUE; - modes->bindToMipmapTexture = GL_FALSE; - modes->bindToTextureTargets = - __DRI_ATTRIB_TEXTURE_1D_BIT | - __DRI_ATTRIB_TEXTURE_2D_BIT | - __DRI_ATTRIB_TEXTURE_RECTANGLE_BIT; - - modes->sRGBCapable = GL_FALSE; - } - } - } - } - *c = NULL; - - return configs; -} - -__DRIconfig **driConcatConfigs(__DRIconfig **a, - __DRIconfig **b) -{ - __DRIconfig **all; - int i, j, index; - - i = 0; - while (a[i] != NULL) - i++; - j = 0; - while (b[j] != NULL) - j++; - - all = malloc((i + j + 1) * sizeof *all); - index = 0; - for (i = 0; a[i] != NULL; i++) - all[index++] = a[i]; - for (j = 0; b[j] != NULL; j++) - all[index++] = b[j]; - all[index++] = NULL; - - free(a); - free(b); - - return all; -} - -#define __ATTRIB(attrib, field) \ - { attrib, offsetof(struct gl_config, field) } - -static const struct { unsigned int attrib, offset; } attribMap[] = { - __ATTRIB(__DRI_ATTRIB_BUFFER_SIZE, rgbBits), - __ATTRIB(__DRI_ATTRIB_LEVEL, level), - __ATTRIB(__DRI_ATTRIB_RED_SIZE, redBits), - __ATTRIB(__DRI_ATTRIB_GREEN_SIZE, greenBits), - __ATTRIB(__DRI_ATTRIB_BLUE_SIZE, blueBits), - __ATTRIB(__DRI_ATTRIB_ALPHA_SIZE, alphaBits), - __ATTRIB(__DRI_ATTRIB_DEPTH_SIZE, depthBits), - __ATTRIB(__DRI_ATTRIB_STENCIL_SIZE, stencilBits), - __ATTRIB(__DRI_ATTRIB_ACCUM_RED_SIZE, accumRedBits), - __ATTRIB(__DRI_ATTRIB_ACCUM_GREEN_SIZE, accumGreenBits), - __ATTRIB(__DRI_ATTRIB_ACCUM_BLUE_SIZE, accumBlueBits), - __ATTRIB(__DRI_ATTRIB_ACCUM_ALPHA_SIZE, accumAlphaBits), - __ATTRIB(__DRI_ATTRIB_SAMPLE_BUFFERS, sampleBuffers), - __ATTRIB(__DRI_ATTRIB_SAMPLES, samples), - __ATTRIB(__DRI_ATTRIB_DOUBLE_BUFFER, doubleBufferMode), - __ATTRIB(__DRI_ATTRIB_STEREO, stereoMode), - __ATTRIB(__DRI_ATTRIB_AUX_BUFFERS, numAuxBuffers), - __ATTRIB(__DRI_ATTRIB_TRANSPARENT_TYPE, transparentPixel), - __ATTRIB(__DRI_ATTRIB_TRANSPARENT_INDEX_VALUE, transparentPixel), - __ATTRIB(__DRI_ATTRIB_TRANSPARENT_RED_VALUE, transparentRed), - __ATTRIB(__DRI_ATTRIB_TRANSPARENT_GREEN_VALUE, transparentGreen), - __ATTRIB(__DRI_ATTRIB_TRANSPARENT_BLUE_VALUE, transparentBlue), - __ATTRIB(__DRI_ATTRIB_TRANSPARENT_ALPHA_VALUE, transparentAlpha), - __ATTRIB(__DRI_ATTRIB_FLOAT_MODE, floatMode), - __ATTRIB(__DRI_ATTRIB_RED_MASK, redMask), - __ATTRIB(__DRI_ATTRIB_GREEN_MASK, greenMask), - __ATTRIB(__DRI_ATTRIB_BLUE_MASK, blueMask), - __ATTRIB(__DRI_ATTRIB_ALPHA_MASK, alphaMask), - __ATTRIB(__DRI_ATTRIB_MAX_PBUFFER_WIDTH, maxPbufferWidth), - __ATTRIB(__DRI_ATTRIB_MAX_PBUFFER_HEIGHT, maxPbufferHeight), - __ATTRIB(__DRI_ATTRIB_MAX_PBUFFER_PIXELS, maxPbufferPixels), - __ATTRIB(__DRI_ATTRIB_OPTIMAL_PBUFFER_WIDTH, optimalPbufferWidth), - __ATTRIB(__DRI_ATTRIB_OPTIMAL_PBUFFER_HEIGHT, optimalPbufferHeight), - __ATTRIB(__DRI_ATTRIB_SWAP_METHOD, swapMethod), - __ATTRIB(__DRI_ATTRIB_BIND_TO_TEXTURE_RGB, bindToTextureRgb), - __ATTRIB(__DRI_ATTRIB_BIND_TO_TEXTURE_RGBA, bindToTextureRgba), - __ATTRIB(__DRI_ATTRIB_BIND_TO_MIPMAP_TEXTURE, bindToMipmapTexture), - __ATTRIB(__DRI_ATTRIB_BIND_TO_TEXTURE_TARGETS, bindToTextureTargets), - __ATTRIB(__DRI_ATTRIB_YINVERTED, yInverted), - __ATTRIB(__DRI_ATTRIB_FRAMEBUFFER_SRGB_CAPABLE, sRGBCapable), - - /* The struct field doesn't matter here, these are handled by the - * switch in driGetConfigAttribIndex. We need them in the array - * so the iterator includes them though.*/ - __ATTRIB(__DRI_ATTRIB_RENDER_TYPE, level), - __ATTRIB(__DRI_ATTRIB_CONFIG_CAVEAT, level), - __ATTRIB(__DRI_ATTRIB_SWAP_METHOD, level) -}; - -#define ARRAY_SIZE(a) (sizeof (a) / sizeof ((a)[0])) - - -/** - * Return the value of a configuration attribute. The attribute is - * indicated by the index. - */ -static int -driGetConfigAttribIndex(const __DRIconfig *config, - unsigned int index, unsigned int *value) -{ - switch (attribMap[index].attrib) { - case __DRI_ATTRIB_RENDER_TYPE: - /* no support for color index mode */ - *value = __DRI_ATTRIB_RGBA_BIT; - break; - case __DRI_ATTRIB_CONFIG_CAVEAT: - if (config->modes.visualRating == GLX_NON_CONFORMANT_CONFIG) - *value = __DRI_ATTRIB_NON_CONFORMANT_CONFIG; - else if (config->modes.visualRating == GLX_SLOW_CONFIG) - *value = __DRI_ATTRIB_SLOW_BIT; - else - *value = 0; - break; - case __DRI_ATTRIB_SWAP_METHOD: - /* XXX no return value??? */ - break; - - case __DRI_ATTRIB_FLOAT_MODE: - /* this field is not int-sized */ - *value = config->modes.floatMode; - break; - - default: - /* any other int-sized field */ - *value = *(unsigned int *) - ((char *) &config->modes + attribMap[index].offset); - - break; - } - - return GL_TRUE; -} - - -/** - * Get the value of a configuration attribute. - * \param attrib the attribute (one of the _DRI_ATTRIB_x tokens) - * \param value returns the attribute's value - * \return 1 for success, 0 for failure - */ -int -driGetConfigAttrib(const __DRIconfig *config, - unsigned int attrib, unsigned int *value) -{ - int i; - - for (i = 0; i < ARRAY_SIZE(attribMap); i++) - if (attribMap[i].attrib == attrib) - return driGetConfigAttribIndex(config, i, value); - - return GL_FALSE; -} - - -/** - * Get a configuration attribute name and value, given an index. - * \param index which field of the __DRIconfig to query - * \param attrib returns the attribute name (one of the _DRI_ATTRIB_x tokens) - * \param value returns the attribute's value - * \return 1 for success, 0 for failure - */ -int -driIndexConfigAttrib(const __DRIconfig *config, int index, - unsigned int *attrib, unsigned int *value) -{ - if (index >= 0 && index < ARRAY_SIZE(attribMap)) { - *attrib = attribMap[index].attrib; - return driGetConfigAttribIndex(config, index, value); - } - - return GL_FALSE; -} +/*
+ * (C) Copyright IBM Corporation 2002, 2004
+ * All Rights Reserved.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * on the rights to use, copy, modify, merge, publish, distribute, sub
+ * license, and/or sell copies of the Software, and to permit persons to whom
+ * the Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice (including the next
+ * paragraph) shall be included in all copies or substantial portions of the
+ * Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT. IN NO EVENT SHALL
+ * VA LINUX SYSTEM, IBM AND/OR THEIR SUPPLIERS BE LIABLE FOR ANY CLAIM,
+ * DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR
+ * OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE
+ * USE OR OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/**
+ * \file utils.c
+ * Utility functions for DRI drivers.
+ *
+ * \author Ian Romanick <idr@us.ibm.com>
+ */
+
+#include <string.h>
+#include <stdlib.h>
+#include "main/mtypes.h"
+#include "main/cpuinfo.h"
+#include "main/extensions.h"
+#include "utils.h"
+
+
+/**
+ * Print message to \c stderr if the \c LIBGL_DEBUG environment variable
+ * is set.
+ *
+ * Is called from the drivers.
+ *
+ * \param f \c printf like format string.
+ */
+void
+__driUtilMessage(const char *f, ...)
+{
+ va_list args;
+
+ if (getenv("LIBGL_DEBUG")) {
+ fprintf(stderr, "libGL: ");
+ va_start(args, f);
+ vfprintf(stderr, f, args);
+ va_end(args);
+ fprintf(stderr, "\n");
+ }
+}
+
+
+unsigned
+driParseDebugString( const char * debug,
+ const struct dri_debug_control * control )
+{
+ unsigned flag;
+
+
+ flag = 0;
+ if ( debug != NULL ) {
+ while( control->string != NULL ) {
+ if ( !strcmp( debug, "all" ) ||
+ strstr( debug, control->string ) != NULL ) {
+ flag |= control->flag;
+ }
+
+ control++;
+ }
+ }
+
+ return flag;
+}
+
+
+
+/**
+ * Create the \c GL_RENDERER string for DRI drivers.
+ *
+ * Almost all DRI drivers use a \c GL_RENDERER string of the form:
+ *
+ * "Mesa DRI <chip> <driver date> <AGP speed) <CPU information>"
+ *
+ * Using the supplied chip name, driver data, and AGP speed, this function
+ * creates the string.
+ *
+ * \param buffer Buffer to hold the \c GL_RENDERER string.
+ * \param hardware_name Name of the hardware.
+ * \param driver_date Driver date.
+ * \param agp_mode AGP mode (speed).
+ *
+ * \returns
+ * The length of the string stored in \c buffer. This does \b not include
+ * the terminating \c NUL character.
+ */
+unsigned
+driGetRendererString( char * buffer, const char * hardware_name,
+ const char * driver_date, GLuint agp_mode )
+{
+ unsigned offset;
+ char *cpu;
+
+ offset = sprintf( buffer, "Mesa DRI %s %s", hardware_name, driver_date );
+
+ /* Append any AGP-specific information.
+ */
+ switch ( agp_mode ) {
+ case 1:
+ case 2:
+ case 4:
+ case 8:
+ offset += sprintf( & buffer[ offset ], " AGP %ux", agp_mode );
+ break;
+
+ default:
+ break;
+ }
+
+ /* Append any CPU-specific information.
+ */
+ cpu = _mesa_get_cpu_string();
+ if (cpu) {
+ offset += sprintf(buffer + offset, " %s", cpu);
+ free(cpu);
+ }
+
+ return offset;
+}
+
+
+
+
+#define need_GL_ARB_copy_buffer
+#define need_GL_ARB_draw_buffers
+#define need_GL_ARB_multisample
+#define need_GL_ARB_texture_compression
+#define need_GL_ARB_transpose_matrix
+#define need_GL_ARB_vertex_buffer_object
+#define need_GL_ARB_window_pos
+#define need_GL_EXT_compiled_vertex_array
+#define need_GL_EXT_multi_draw_arrays
+#define need_GL_EXT_polygon_offset
+#define need_GL_EXT_texture_object
+#define need_GL_EXT_vertex_array
+#define need_GL_IBM_multimode_draw_arrays
+#define need_GL_MESA_window_pos
+
+/* These are needed in *all* drivers because Mesa internally implements
+ * certain functionality in terms of functions provided by these extensions.
+ * For example, glBlendFunc is implemented by calling glBlendFuncSeparateEXT.
+ */
+#define need_GL_EXT_blend_func_separate
+#define need_GL_NV_vertex_program
+
+#include "main/remap_helper.h"
+
+static const struct dri_extension all_mesa_extensions[] = {
+ { "GL_ARB_copy_buffer", GL_ARB_copy_buffer_functions },
+ { "GL_ARB_draw_buffers", GL_ARB_draw_buffers_functions },
+ { "GL_ARB_multisample", GL_ARB_multisample_functions },
+ { "GL_ARB_texture_compression", GL_ARB_texture_compression_functions },
+ { "GL_ARB_transpose_matrix", GL_ARB_transpose_matrix_functions },
+ { "GL_ARB_vertex_buffer_object", GL_ARB_vertex_buffer_object_functions},
+ { "GL_ARB_window_pos", GL_ARB_window_pos_functions },
+ { "GL_EXT_blend_func_separate", GL_EXT_blend_func_separate_functions },
+ { "GL_EXT_compiled_vertex_array", GL_EXT_compiled_vertex_array_functions },
+ { "GL_EXT_multi_draw_arrays", GL_EXT_multi_draw_arrays_functions },
+ { "GL_EXT_polygon_offset", GL_EXT_polygon_offset_functions },
+ { "GL_EXT_texture_object", GL_EXT_texture_object_functions },
+ { "GL_EXT_vertex_array", GL_EXT_vertex_array_functions },
+ { "GL_IBM_multimode_draw_arrays", GL_IBM_multimode_draw_arrays_functions },
+ { "GL_MESA_window_pos", GL_MESA_window_pos_functions },
+ { "GL_NV_vertex_program", GL_NV_vertex_program_functions },
+ { NULL, NULL }
+};
+
+
+/**
+ * Enable and map extensions supported by the driver.
+ *
+ * When ctx is NULL, extensions are not enabled, but their functions
+ * are still mapped. When extensions_to_enable is NULL, all static
+ * functions known to mesa core are mapped.
+ *
+ * \bug
+ * ARB_imaging isn't handled properly. In Mesa, enabling ARB_imaging also
+ * enables all the sub-extensions that are folded into it. This means that
+ * we need to add entry-points (via \c driInitSingleExtension) for those
+ * new functions here.
+ */
+void driInitExtensions( struct gl_context * ctx,
+ const struct dri_extension * extensions_to_enable,
+ GLboolean enable_imaging )
+{
+ static int first_time = 1;
+ unsigned i;
+
+ if ( first_time ) {
+ first_time = 0;
+ driInitExtensions( NULL, all_mesa_extensions, GL_FALSE );
+ }
+
+ if ( (ctx != NULL) && enable_imaging ) {
+ _mesa_enable_imaging_extensions( ctx );
+ }
+
+ /* The caller is too lazy to list any extension */
+ if ( extensions_to_enable == NULL ) {
+ /* Map the static functions. Together with those mapped by remap
+ * table, this should cover everything mesa core knows.
+ */
+#ifdef _GLAPI_USE_REMAP_TABLE
+ _mesa_map_static_functions();
+#endif
+ return;
+ }
+
+ for ( i = 0 ; extensions_to_enable[i].name != NULL ; i++ ) {
+ driInitSingleExtension( ctx, & extensions_to_enable[i] );
+ }
+}
+
+
+
+
+/**
+ * Enable and map functions for a single extension
+ *
+ * \param ctx Context where extension is to be enabled.
+ * \param ext Extension that is to be enabled.
+ *
+ * \sa driInitExtensions, _mesa_enable_extension, _mesa_map_function_array
+ */
+void driInitSingleExtension( struct gl_context * ctx,
+ const struct dri_extension * ext )
+{
+ if ( ext->functions != NULL ) {
+ _mesa_map_function_array(ext->functions);
+ }
+
+ if ( ctx != NULL ) {
+ _mesa_enable_extension( ctx, ext->name );
+ }
+}
+
+
+/**
+ * Utility function used by drivers to test the verions of other components.
+ *
+ * \param driver_name Name of the driver. Used in error messages.
+ * \param driActual Actual DRI version supplied __driCreateNewScreen.
+ * \param driExpected Minimum DRI version required by the driver.
+ * \param ddxActual Actual DDX version supplied __driCreateNewScreen.
+ * \param ddxExpected Minimum DDX minor and range of DDX major version required by the driver.
+ * \param drmActual Actual DRM version supplied __driCreateNewScreen.
+ * \param drmExpected Minimum DRM version required by the driver.
+ *
+ * \returns \c GL_TRUE if all version requirements are met. Otherwise,
+ * \c GL_FALSE is returned.
+ *
+ * \sa __driCreateNewScreen, driCheckDriDdxDrmVersions2
+ *
+ * \todo
+ * Now that the old \c driCheckDriDdxDrmVersions function is gone, this
+ * function and \c driCheckDriDdxDrmVersions2 should be renamed.
+ */
+GLboolean
+driCheckDriDdxDrmVersions3(const char * driver_name,
+ const __DRIversion * driActual,
+ const __DRIversion * driExpected,
+ const __DRIversion * ddxActual,
+ const __DRIutilversion2 * ddxExpected,
+ const __DRIversion * drmActual,
+ const __DRIversion * drmExpected)
+{
+ static const char format[] = "%s DRI driver expected %s version %d.%d.x "
+ "but got version %d.%d.%d\n";
+ static const char format2[] = "%s DRI driver expected %s version %d-%d.%d.x "
+ "but got version %d.%d.%d\n";
+
+
+ /* Check the DRI version */
+ if ( (driActual->major != driExpected->major)
+ || (driActual->minor < driExpected->minor) ) {
+ fprintf(stderr, format, driver_name, "DRI",
+ driExpected->major, driExpected->minor,
+ driActual->major, driActual->minor, driActual->patch);
+ return GL_FALSE;
+ }
+
+ /* Check that the DDX driver version is compatible */
+ if ( (ddxActual->major < ddxExpected->major_min)
+ || (ddxActual->major > ddxExpected->major_max)
+ || (ddxActual->minor < ddxExpected->minor) ) {
+ fprintf(stderr, format2, driver_name, "DDX",
+ ddxExpected->major_min, ddxExpected->major_max, ddxExpected->minor,
+ ddxActual->major, ddxActual->minor, ddxActual->patch);
+ return GL_FALSE;
+ }
+
+ /* Check that the DRM driver version is compatible */
+ if ( (drmActual->major != drmExpected->major)
+ || (drmActual->minor < drmExpected->minor) ) {
+ fprintf(stderr, format, driver_name, "DRM",
+ drmExpected->major, drmExpected->minor,
+ drmActual->major, drmActual->minor, drmActual->patch);
+ return GL_FALSE;
+ }
+
+ return GL_TRUE;
+}
+
+GLboolean
+driCheckDriDdxDrmVersions2(const char * driver_name,
+ const __DRIversion * driActual,
+ const __DRIversion * driExpected,
+ const __DRIversion * ddxActual,
+ const __DRIversion * ddxExpected,
+ const __DRIversion * drmActual,
+ const __DRIversion * drmExpected)
+{
+ __DRIutilversion2 ddx_expected;
+ ddx_expected.major_min = ddxExpected->major;
+ ddx_expected.major_max = ddxExpected->major;
+ ddx_expected.minor = ddxExpected->minor;
+ ddx_expected.patch = ddxExpected->patch;
+ return driCheckDriDdxDrmVersions3(driver_name, driActual,
+ driExpected, ddxActual, & ddx_expected,
+ drmActual, drmExpected);
+}
+
+GLboolean driClipRectToFramebuffer( const struct gl_framebuffer *buffer,
+ GLint *x, GLint *y,
+ GLsizei *width, GLsizei *height )
+{
+ /* left clipping */
+ if (*x < buffer->_Xmin) {
+ *width -= (buffer->_Xmin - *x);
+ *x = buffer->_Xmin;
+ }
+
+ /* right clipping */
+ if (*x + *width > buffer->_Xmax)
+ *width -= (*x + *width - buffer->_Xmax - 1);
+
+ if (*width <= 0)
+ return GL_FALSE;
+
+ /* bottom clipping */
+ if (*y < buffer->_Ymin) {
+ *height -= (buffer->_Ymin - *y);
+ *y = buffer->_Ymin;
+ }
+
+ /* top clipping */
+ if (*y + *height > buffer->_Ymax)
+ *height -= (*y + *height - buffer->_Ymax - 1);
+
+ if (*height <= 0)
+ return GL_FALSE;
+
+ return GL_TRUE;
+}
+
+/**
+ * Creates a set of \c struct gl_config that a driver will expose.
+ *
+ * A set of \c struct gl_config will be created based on the supplied
+ * parameters. The number of modes processed will be 2 *
+ * \c num_depth_stencil_bits * \c num_db_modes.
+ *
+ * For the most part, data is just copied from \c depth_bits, \c stencil_bits,
+ * \c db_modes, and \c visType into each \c struct gl_config element.
+ * However, the meanings of \c fb_format and \c fb_type require further
+ * explanation. The \c fb_format specifies which color components are in
+ * each pixel and what the default order is. For example, \c GL_RGB specifies
+ * that red, green, blue are available and red is in the "most significant"
+ * position and blue is in the "least significant". The \c fb_type specifies
+ * the bit sizes of each component and the actual ordering. For example, if
+ * \c GL_UNSIGNED_SHORT_5_6_5_REV is specified with \c GL_RGB, bits [15:11]
+ * are the blue value, bits [10:5] are the green value, and bits [4:0] are
+ * the red value.
+ *
+ * One sublte issue is the combination of \c GL_RGB or \c GL_BGR and either
+ * of the \c GL_UNSIGNED_INT_8_8_8_8 modes. The resulting mask values in the
+ * \c struct gl_config structure is \b identical to the \c GL_RGBA or
+ * \c GL_BGRA case, except the \c alphaMask is zero. This means that, as
+ * far as this routine is concerned, \c GL_RGB with \c GL_UNSIGNED_INT_8_8_8_8
+ * still uses 32-bits.
+ *
+ * If in doubt, look at the tables used in the function.
+ *
+ * \param ptr_to_modes Pointer to a pointer to a linked list of
+ * \c struct gl_config. Upon completion, a pointer to
+ * the next element to be process will be stored here.
+ * If the function fails and returns \c GL_FALSE, this
+ * value will be unmodified, but some elements in the
+ * linked list may be modified.
+ * \param fb_format Format of the framebuffer. Currently only \c GL_RGB,
+ * \c GL_RGBA, \c GL_BGR, and \c GL_BGRA are supported.
+ * \param fb_type Type of the pixels in the framebuffer. Currently only
+ * \c GL_UNSIGNED_SHORT_5_6_5,
+ * \c GL_UNSIGNED_SHORT_5_6_5_REV,
+ * \c GL_UNSIGNED_INT_8_8_8_8, and
+ * \c GL_UNSIGNED_INT_8_8_8_8_REV are supported.
+ * \param depth_bits Array of depth buffer sizes to be exposed.
+ * \param stencil_bits Array of stencil buffer sizes to be exposed.
+ * \param num_depth_stencil_bits Number of entries in both \c depth_bits and
+ * \c stencil_bits.
+ * \param db_modes Array of buffer swap modes. If an element has a
+ * value of \c GLX_NONE, then it represents a
+ * single-buffered mode. Other valid values are
+ * \c GLX_SWAP_EXCHANGE_OML, \c GLX_SWAP_COPY_OML, and
+ * \c GLX_SWAP_UNDEFINED_OML. See the
+ * GLX_OML_swap_method extension spec for more details.
+ * \param num_db_modes Number of entries in \c db_modes.
+ * \param msaa_samples Array of msaa sample count. 0 represents a visual
+ * without a multisample buffer.
+ * \param num_msaa_modes Number of entries in \c msaa_samples.
+ * \param visType GLX visual type. Usually either \c GLX_TRUE_COLOR or
+ * \c GLX_DIRECT_COLOR.
+ *
+ * \returns
+ * \c GL_TRUE on success or \c GL_FALSE on failure. Currently the only
+ * cause of failure is a bad parameter (i.e., unsupported \c fb_format or
+ * \c fb_type).
+ *
+ * \todo
+ * There is currently no way to support packed RGB modes (i.e., modes with
+ * exactly 3 bytes per pixel) or floating-point modes. This could probably
+ * be done by creating some new, private enums with clever names likes
+ * \c GL_UNSIGNED_3BYTE_8_8_8, \c GL_4FLOAT_32_32_32_32,
+ * \c GL_4HALF_16_16_16_16, etc. We can cross that bridge when we come to it.
+ */
+__DRIconfig **
+driCreateConfigs(GLenum fb_format, GLenum fb_type,
+ const uint8_t * depth_bits, const uint8_t * stencil_bits,
+ unsigned num_depth_stencil_bits,
+ const GLenum * db_modes, unsigned num_db_modes,
+ const uint8_t * msaa_samples, unsigned num_msaa_modes,
+ GLboolean enable_accum)
+{
+ static const uint8_t bits_table[4][4] = {
+ /* R G B A */
+ { 3, 3, 2, 0 }, /* Any GL_UNSIGNED_BYTE_3_3_2 */
+ { 5, 6, 5, 0 }, /* Any GL_UNSIGNED_SHORT_5_6_5 */
+ { 8, 8, 8, 0 }, /* Any RGB with any GL_UNSIGNED_INT_8_8_8_8 */
+ { 8, 8, 8, 8 } /* Any RGBA with any GL_UNSIGNED_INT_8_8_8_8 */
+ };
+
+ static const uint32_t masks_table_rgb[6][4] = {
+ { 0x000000E0, 0x0000001C, 0x00000003, 0x00000000 }, /* 3_3_2 */
+ { 0x00000007, 0x00000038, 0x000000C0, 0x00000000 }, /* 2_3_3_REV */
+ { 0x0000F800, 0x000007E0, 0x0000001F, 0x00000000 }, /* 5_6_5 */
+ { 0x0000001F, 0x000007E0, 0x0000F800, 0x00000000 }, /* 5_6_5_REV */
+ { 0xFF000000, 0x00FF0000, 0x0000FF00, 0x00000000 }, /* 8_8_8_8 */
+ { 0x000000FF, 0x0000FF00, 0x00FF0000, 0x00000000 } /* 8_8_8_8_REV */
+ };
+
+ static const uint32_t masks_table_rgba[6][4] = {
+ { 0x000000E0, 0x0000001C, 0x00000003, 0x00000000 }, /* 3_3_2 */
+ { 0x00000007, 0x00000038, 0x000000C0, 0x00000000 }, /* 2_3_3_REV */
+ { 0x0000F800, 0x000007E0, 0x0000001F, 0x00000000 }, /* 5_6_5 */
+ { 0x0000001F, 0x000007E0, 0x0000F800, 0x00000000 }, /* 5_6_5_REV */
+ { 0xFF000000, 0x00FF0000, 0x0000FF00, 0x000000FF }, /* 8_8_8_8 */
+ { 0x000000FF, 0x0000FF00, 0x00FF0000, 0xFF000000 }, /* 8_8_8_8_REV */
+ };
+
+ static const uint32_t masks_table_bgr[6][4] = {
+ { 0x00000007, 0x00000038, 0x000000C0, 0x00000000 }, /* 3_3_2 */
+ { 0x000000E0, 0x0000001C, 0x00000003, 0x00000000 }, /* 2_3_3_REV */
+ { 0x0000001F, 0x000007E0, 0x0000F800, 0x00000000 }, /* 5_6_5 */
+ { 0x0000F800, 0x000007E0, 0x0000001F, 0x00000000 }, /* 5_6_5_REV */
+ { 0x0000FF00, 0x00FF0000, 0xFF000000, 0x00000000 }, /* 8_8_8_8 */
+ { 0x00FF0000, 0x0000FF00, 0x000000FF, 0x00000000 }, /* 8_8_8_8_REV */
+ };
+
+ static const uint32_t masks_table_bgra[6][4] = {
+ { 0x00000007, 0x00000038, 0x000000C0, 0x00000000 }, /* 3_3_2 */
+ { 0x000000E0, 0x0000001C, 0x00000003, 0x00000000 }, /* 2_3_3_REV */
+ { 0x0000001F, 0x000007E0, 0x0000F800, 0x00000000 }, /* 5_6_5 */
+ { 0x0000F800, 0x000007E0, 0x0000001F, 0x00000000 }, /* 5_6_5_REV */
+ { 0x0000FF00, 0x00FF0000, 0xFF000000, 0x000000FF }, /* 8_8_8_8 */
+ { 0x00FF0000, 0x0000FF00, 0x000000FF, 0xFF000000 }, /* 8_8_8_8_REV */
+ };
+
+ static const uint8_t bytes_per_pixel[6] = {
+ 1, /* 3_3_2 */
+ 1, /* 2_3_3_REV */
+ 2, /* 5_6_5 */
+ 2, /* 5_6_5_REV */
+ 4, /* 8_8_8_8 */
+ 4 /* 8_8_8_8_REV */
+ };
+
+ const uint8_t * bits;
+ const uint32_t * masks;
+ int index;
+ __DRIconfig **configs, **c;
+ struct gl_config *modes;
+ unsigned i, j, k, h;
+ unsigned num_modes;
+ unsigned num_accum_bits = (enable_accum) ? 2 : 1;
+
+ switch ( fb_type ) {
+ case GL_UNSIGNED_BYTE_3_3_2:
+ index = 0;
+ break;
+ case GL_UNSIGNED_BYTE_2_3_3_REV:
+ index = 1;
+ break;
+ case GL_UNSIGNED_SHORT_5_6_5:
+ index = 2;
+ break;
+ case GL_UNSIGNED_SHORT_5_6_5_REV:
+ index = 3;
+ break;
+ case GL_UNSIGNED_INT_8_8_8_8:
+ index = 4;
+ break;
+ case GL_UNSIGNED_INT_8_8_8_8_REV:
+ index = 5;
+ break;
+ default:
+ fprintf( stderr, "[%s:%u] Unknown framebuffer type 0x%04x.\n",
+ __FUNCTION__, __LINE__, fb_type );
+ return NULL;
+ }
+
+
+ /* Valid types are GL_UNSIGNED_SHORT_5_6_5 and GL_UNSIGNED_INT_8_8_8_8 and
+ * the _REV versions.
+ *
+ * Valid formats are GL_RGBA, GL_RGB, and GL_BGRA.
+ */
+
+ switch ( fb_format ) {
+ case GL_RGB:
+ masks = masks_table_rgb[ index ];
+ break;
+
+ case GL_RGBA:
+ masks = masks_table_rgba[ index ];
+ break;
+
+ case GL_BGR:
+ masks = masks_table_bgr[ index ];
+ break;
+
+ case GL_BGRA:
+ masks = masks_table_bgra[ index ];
+ break;
+
+ default:
+ fprintf( stderr, "[%s:%u] Unknown framebuffer format 0x%04x.\n",
+ __FUNCTION__, __LINE__, fb_format );
+ return NULL;
+ }
+
+ switch ( bytes_per_pixel[ index ] ) {
+ case 1:
+ bits = bits_table[0];
+ break;
+ case 2:
+ bits = bits_table[1];
+ break;
+ default:
+ bits = ((fb_format == GL_RGB) || (fb_format == GL_BGR))
+ ? bits_table[2]
+ : bits_table[3];
+ break;
+ }
+
+ num_modes = num_depth_stencil_bits * num_db_modes * num_accum_bits * num_msaa_modes;
+ configs = calloc(1, (num_modes + 1) * sizeof *configs);
+ if (configs == NULL)
+ return NULL;
+
+ c = configs;
+ for ( k = 0 ; k < num_depth_stencil_bits ; k++ ) {
+ for ( i = 0 ; i < num_db_modes ; i++ ) {
+ for ( h = 0 ; h < num_msaa_modes; h++ ) {
+ for ( j = 0 ; j < num_accum_bits ; j++ ) {
+ *c = malloc (sizeof **c);
+ modes = &(*c)->modes;
+ c++;
+
+ memset(modes, 0, sizeof *modes);
+ modes->redBits = bits[0];
+ modes->greenBits = bits[1];
+ modes->blueBits = bits[2];
+ modes->alphaBits = bits[3];
+ modes->redMask = masks[0];
+ modes->greenMask = masks[1];
+ modes->blueMask = masks[2];
+ modes->alphaMask = masks[3];
+ modes->rgbBits = modes->redBits + modes->greenBits
+ + modes->blueBits + modes->alphaBits;
+
+ modes->accumRedBits = 16 * j;
+ modes->accumGreenBits = 16 * j;
+ modes->accumBlueBits = 16 * j;
+ modes->accumAlphaBits = (masks[3] != 0) ? 16 * j : 0;
+ modes->visualRating = (j == 0) ? GLX_NONE : GLX_SLOW_CONFIG;
+
+ modes->stencilBits = stencil_bits[k];
+ modes->depthBits = depth_bits[k];
+
+ modes->transparentPixel = GLX_NONE;
+ modes->transparentRed = GLX_DONT_CARE;
+ modes->transparentGreen = GLX_DONT_CARE;
+ modes->transparentBlue = GLX_DONT_CARE;
+ modes->transparentAlpha = GLX_DONT_CARE;
+ modes->transparentIndex = GLX_DONT_CARE;
+ modes->rgbMode = GL_TRUE;
+
+ if ( db_modes[i] == GLX_NONE ) {
+ modes->doubleBufferMode = GL_FALSE;
+ }
+ else {
+ modes->doubleBufferMode = GL_TRUE;
+ modes->swapMethod = db_modes[i];
+ }
+
+ modes->samples = msaa_samples[h];
+ modes->sampleBuffers = modes->samples ? 1 : 0;
+
+
+ modes->haveAccumBuffer = ((modes->accumRedBits +
+ modes->accumGreenBits +
+ modes->accumBlueBits +
+ modes->accumAlphaBits) > 0);
+ modes->haveDepthBuffer = (modes->depthBits > 0);
+ modes->haveStencilBuffer = (modes->stencilBits > 0);
+
+ modes->bindToTextureRgb = GL_TRUE;
+ modes->bindToTextureRgba = GL_TRUE;
+ modes->bindToMipmapTexture = GL_FALSE;
+ modes->bindToTextureTargets =
+ __DRI_ATTRIB_TEXTURE_1D_BIT |
+ __DRI_ATTRIB_TEXTURE_2D_BIT |
+ __DRI_ATTRIB_TEXTURE_RECTANGLE_BIT;
+
+ modes->sRGBCapable = GL_FALSE;
+ }
+ }
+ }
+ }
+ *c = NULL;
+
+ return configs;
+}
+
+__DRIconfig **driConcatConfigs(__DRIconfig **a,
+ __DRIconfig **b)
+{
+ __DRIconfig **all;
+ int i, j, index;
+
+ i = 0;
+ while (a[i] != NULL)
+ i++;
+ j = 0;
+ while (b[j] != NULL)
+ j++;
+
+ all = malloc((i + j + 1) * sizeof *all);
+ index = 0;
+ for (i = 0; a[i] != NULL; i++)
+ all[index++] = a[i];
+ for (j = 0; b[j] != NULL; j++)
+ all[index++] = b[j];
+ all[index++] = NULL;
+
+ free(a);
+ free(b);
+
+ return all;
+}
+
+#define __ATTRIB(attrib, field) \
+ { attrib, offsetof(struct gl_config, field) }
+
+static const struct { unsigned int attrib, offset; } attribMap[] = {
+ __ATTRIB(__DRI_ATTRIB_BUFFER_SIZE, rgbBits),
+ __ATTRIB(__DRI_ATTRIB_LEVEL, level),
+ __ATTRIB(__DRI_ATTRIB_RED_SIZE, redBits),
+ __ATTRIB(__DRI_ATTRIB_GREEN_SIZE, greenBits),
+ __ATTRIB(__DRI_ATTRIB_BLUE_SIZE, blueBits),
+ __ATTRIB(__DRI_ATTRIB_ALPHA_SIZE, alphaBits),
+ __ATTRIB(__DRI_ATTRIB_DEPTH_SIZE, depthBits),
+ __ATTRIB(__DRI_ATTRIB_STENCIL_SIZE, stencilBits),
+ __ATTRIB(__DRI_ATTRIB_ACCUM_RED_SIZE, accumRedBits),
+ __ATTRIB(__DRI_ATTRIB_ACCUM_GREEN_SIZE, accumGreenBits),
+ __ATTRIB(__DRI_ATTRIB_ACCUM_BLUE_SIZE, accumBlueBits),
+ __ATTRIB(__DRI_ATTRIB_ACCUM_ALPHA_SIZE, accumAlphaBits),
+ __ATTRIB(__DRI_ATTRIB_SAMPLE_BUFFERS, sampleBuffers),
+ __ATTRIB(__DRI_ATTRIB_SAMPLES, samples),
+ __ATTRIB(__DRI_ATTRIB_DOUBLE_BUFFER, doubleBufferMode),
+ __ATTRIB(__DRI_ATTRIB_STEREO, stereoMode),
+ __ATTRIB(__DRI_ATTRIB_AUX_BUFFERS, numAuxBuffers),
+ __ATTRIB(__DRI_ATTRIB_TRANSPARENT_TYPE, transparentPixel),
+ __ATTRIB(__DRI_ATTRIB_TRANSPARENT_INDEX_VALUE, transparentPixel),
+ __ATTRIB(__DRI_ATTRIB_TRANSPARENT_RED_VALUE, transparentRed),
+ __ATTRIB(__DRI_ATTRIB_TRANSPARENT_GREEN_VALUE, transparentGreen),
+ __ATTRIB(__DRI_ATTRIB_TRANSPARENT_BLUE_VALUE, transparentBlue),
+ __ATTRIB(__DRI_ATTRIB_TRANSPARENT_ALPHA_VALUE, transparentAlpha),
+ __ATTRIB(__DRI_ATTRIB_FLOAT_MODE, floatMode),
+ __ATTRIB(__DRI_ATTRIB_RED_MASK, redMask),
+ __ATTRIB(__DRI_ATTRIB_GREEN_MASK, greenMask),
+ __ATTRIB(__DRI_ATTRIB_BLUE_MASK, blueMask),
+ __ATTRIB(__DRI_ATTRIB_ALPHA_MASK, alphaMask),
+ __ATTRIB(__DRI_ATTRIB_MAX_PBUFFER_WIDTH, maxPbufferWidth),
+ __ATTRIB(__DRI_ATTRIB_MAX_PBUFFER_HEIGHT, maxPbufferHeight),
+ __ATTRIB(__DRI_ATTRIB_MAX_PBUFFER_PIXELS, maxPbufferPixels),
+ __ATTRIB(__DRI_ATTRIB_OPTIMAL_PBUFFER_WIDTH, optimalPbufferWidth),
+ __ATTRIB(__DRI_ATTRIB_OPTIMAL_PBUFFER_HEIGHT, optimalPbufferHeight),
+ __ATTRIB(__DRI_ATTRIB_SWAP_METHOD, swapMethod),
+ __ATTRIB(__DRI_ATTRIB_BIND_TO_TEXTURE_RGB, bindToTextureRgb),
+ __ATTRIB(__DRI_ATTRIB_BIND_TO_TEXTURE_RGBA, bindToTextureRgba),
+ __ATTRIB(__DRI_ATTRIB_BIND_TO_MIPMAP_TEXTURE, bindToMipmapTexture),
+ __ATTRIB(__DRI_ATTRIB_BIND_TO_TEXTURE_TARGETS, bindToTextureTargets),
+ __ATTRIB(__DRI_ATTRIB_YINVERTED, yInverted),
+ __ATTRIB(__DRI_ATTRIB_FRAMEBUFFER_SRGB_CAPABLE, sRGBCapable),
+
+ /* The struct field doesn't matter here, these are handled by the
+ * switch in driGetConfigAttribIndex. We need them in the array
+ * so the iterator includes them though.*/
+ __ATTRIB(__DRI_ATTRIB_RENDER_TYPE, level),
+ __ATTRIB(__DRI_ATTRIB_CONFIG_CAVEAT, level),
+ __ATTRIB(__DRI_ATTRIB_SWAP_METHOD, level)
+};
+
+#define ARRAY_SIZE(a) (sizeof (a) / sizeof ((a)[0]))
+
+
+/**
+ * Return the value of a configuration attribute. The attribute is
+ * indicated by the index.
+ */
+static int
+driGetConfigAttribIndex(const __DRIconfig *config,
+ unsigned int index, unsigned int *value)
+{
+ switch (attribMap[index].attrib) {
+ case __DRI_ATTRIB_RENDER_TYPE:
+ /* no support for color index mode */
+ *value = __DRI_ATTRIB_RGBA_BIT;
+ break;
+ case __DRI_ATTRIB_CONFIG_CAVEAT:
+ if (config->modes.visualRating == GLX_NON_CONFORMANT_CONFIG)
+ *value = __DRI_ATTRIB_NON_CONFORMANT_CONFIG;
+ else if (config->modes.visualRating == GLX_SLOW_CONFIG)
+ *value = __DRI_ATTRIB_SLOW_BIT;
+ else
+ *value = 0;
+ break;
+ case __DRI_ATTRIB_SWAP_METHOD:
+ /* XXX no return value??? */
+ break;
+
+ case __DRI_ATTRIB_FLOAT_MODE:
+ /* this field is not int-sized */
+ *value = config->modes.floatMode;
+ break;
+
+ default:
+ /* any other int-sized field */
+ *value = *(unsigned int *)
+ ((char *) &config->modes + attribMap[index].offset);
+
+ break;
+ }
+
+ return GL_TRUE;
+}
+
+
+/**
+ * Get the value of a configuration attribute.
+ * \param attrib the attribute (one of the _DRI_ATTRIB_x tokens)
+ * \param value returns the attribute's value
+ * \return 1 for success, 0 for failure
+ */
+int
+driGetConfigAttrib(const __DRIconfig *config,
+ unsigned int attrib, unsigned int *value)
+{
+ int i;
+
+ for (i = 0; i < ARRAY_SIZE(attribMap); i++)
+ if (attribMap[i].attrib == attrib)
+ return driGetConfigAttribIndex(config, i, value);
+
+ return GL_FALSE;
+}
+
+
+/**
+ * Get a configuration attribute name and value, given an index.
+ * \param index which field of the __DRIconfig to query
+ * \param attrib returns the attribute name (one of the _DRI_ATTRIB_x tokens)
+ * \param value returns the attribute's value
+ * \return 1 for success, 0 for failure
+ */
+int
+driIndexConfigAttrib(const __DRIconfig *config, int index,
+ unsigned int *attrib, unsigned int *value)
+{
+ if (index >= 0 && index < ARRAY_SIZE(attribMap)) {
+ *attrib = attribMap[index].attrib;
+ return driGetConfigAttribIndex(config, index, value);
+ }
+
+ return GL_FALSE;
+}
|