diff options
Diffstat (limited to 'openssl/apps')
-rw-r--r-- | openssl/apps/makeapps.com | 2112 |
1 files changed, 1056 insertions, 1056 deletions
diff --git a/openssl/apps/makeapps.com b/openssl/apps/makeapps.com index 6a7e4b4a4..7a728e6a5 100644 --- a/openssl/apps/makeapps.com +++ b/openssl/apps/makeapps.com @@ -1,1056 +1,1056 @@ -$!
-$! MAKEAPPS.COM
-$! Written By: Robert Byer
-$! Vice-President
-$! A-Com Computing, Inc.
-$! byer@mail.all-net.net
-$!
-$! Changes by Richard Levitte <richard@levitte.org>
-$! Zoltan Arpadffy <zoli@polarhome.com>
-$!
-$! This command files compiles and creates all the various different
-$! "application" programs for the different types of encryption for OpenSSL.
-$! The EXE's are placed in the directory [.xxx.EXE.APPS] where "xxx" denotes
-$! ALPHA, IA64 or VAX, depending on your machine architecture.
-$!
-$! It was written so it would try to determine what "C" compiler to
-$! use or you can specify which "C" compiler to use.
-$!
-$! Specify DEBUG or NODEBUG as P1 to compile with or without debugger
-$! information.
-$!
-$! Specify which compiler at P2 to try to compile under.
-$!
-$! VAXC For VAX C.
-$! DECC For DEC C.
-$! GNUC For GNU C.
-$!
-$! If you don't specify a compiler, it will try to determine which
-$! "C" compiler to use.
-$!
-$! P3, if defined, sets a TCP/IP library to use, through one of the following
-$! keywords:
-$!
-$! UCX for UCX
-$! SOCKETSHR for SOCKETSHR+NETLIB
-$! TCPIP for TCPIP (post UCX)
-$!
-$! P4, if defined, sets a compiler thread NOT needed on OpenVMS 7.1 (and up)
-$!
-$! P5, if defined, sets a choice of programs to compile.
-$!
-$! For 64 bit architectures (Alpha and IA64), specify the pointer size as P6.
-$! For 32 bit architectures (VAX), P6 is ignored.
-$! Currently supported values are:
-$!
-$! 32 To ge a library compiled with /POINTER_SIZE=32
-$! 64 To ge a library compiled with /POINTER_SIZE=64
-$!
-$!
-$! Define A TCP/IP Library That We Will Need To Link To.
-$! (That Is, If We Need To Link To One.)
-$!
-$ TCPIP_LIB = ""
-$!
-$! Check What Architecture We Are Using.
-$!
-$ IF (F$GETSYI("CPU").LT.128)
-$ THEN
-$!
-$! The Architecture Is VAX.
-$!
-$ ARCH = "VAX"
-$!
-$! Else...
-$!
-$ ELSE
-$!
-$! The Architecture Is Alpha, IA64 or whatever comes in the future.
-$!
-$ ARCH = F$EDIT( F$GETSYI( "ARCH_NAME"), "UPCASE")
-$ IF (ARCH .EQS. "") THEN ARCH = "UNK"
-$!
-$! End The Architecture Check.
-$!
-$ ENDIF
-$!
-$! Define what programs should be compiled
-$!
-$ PROGRAMS := OPENSSL
-$!
-$! Define The CRYPTO Library.
-$!
-$ CRYPTO_LIB := SYS$DISK:[-.'ARCH'.EXE.CRYPTO]LIBCRYPTO'LIB32'.OLB
-$!
-$! Define The SSL Library.
-$!
-$ SSL_LIB := SYS$DISK:[-.'ARCH'.EXE.SSL]LIBSSL'LIB32'.OLB
-$!
-$! Define The OBJ Directory.
-$!
-$ OBJ_DIR := SYS$DISK:[-.'ARCH'.OBJ.APPS]
-$!
-$! Define The EXE Directory.
-$!
-$ EXE_DIR := SYS$DISK:[-.'ARCH'.EXE.APPS]
-$!
-$! Check To Make Sure We Have Valid Command Line Parameters.
-$!
-$ GOSUB CHECK_OPTIONS
-$!
-$! Initialise logical names and such
-$!
-$ GOSUB INITIALISE
-$!
-$! Tell The User What Kind of Machine We Run On.
-$!
-$ WRITE SYS$OUTPUT "Compiling On A ",ARCH," Machine."
-$!
-$! Check To See If The OBJ Directory Exists.
-$!
-$ IF (F$PARSE(OBJ_DIR).EQS."")
-$ THEN
-$!
-$! It Dosen't Exist, So Create It.
-$!
-$ CREATE/DIRECTORY 'OBJ_DIR'
-$!
-$! End The OBJ Directory Check.
-$!
-$ ENDIF
-$!
-$! Check To See If The EXE Directory Exists.
-$!
-$ IF (F$PARSE(EXE_DIR).EQS."")
-$ THEN
-$!
-$! It Dosen't Exist, So Create It.
-$!
-$ CREATE/DIRECTORY 'EXE_DIR'
-$!
-$! End The EXE Directory Check.
-$!
-$ ENDIF
-$!
-$! Check To See If We Have The Proper Libraries.
-$!
-$ GOSUB LIB_CHECK
-$!
-$! Check To See If We Have A Linker Option File.
-$!
-$ GOSUB CHECK_OPT_FILE
-$!
-$! Define The Application Files.
-$! NOTE: Some might think this list ugly. However, it's made this way to
-$! reflect the E_OBJ variable in Makefile as closely as possible, thereby
-$! making it fairly easy to verify that the lists are the same.
-$!
-$ LIB_OPENSSL = "VERIFY,ASN1PARS,REQ,DGST,DH,DHPARAM,ENC,PASSWD,GENDH,ERRSTR,"+-
- "CA,PKCS7,CRL2P7,CRL,"+-
- "RSA,RSAUTL,DSA,DSAPARAM,EC,ECPARAM,"+-
- "X509,GENRSA,GENDSA,GENPKEY,S_SERVER,S_CLIENT,SPEED,"+-
- "S_TIME,APPS,S_CB,S_SOCKET,APP_RAND,VERSION,SESS_ID,"+-
- "CIPHERS,NSEQ,PKCS12,PKCS8,PKEY,PKEYPARAM,PKEYUTL,"+ -
- "SPKAC,SMIME,CMS,RAND,ENGINE,OCSP,PRIME,TS"
-$ TCPIP_PROGRAMS = ",,"
-$ IF COMPILER .EQS. "VAXC" THEN -
- TCPIP_PROGRAMS = ",OPENSSL,"
-$!
-$! Setup exceptional compilations
-$!
-$ COMPILEWITH_CC2 = ",S_SOCKET,S_SERVER,S_CLIENT,"
-$!
-$ PHASE := LIB
-$!
-$ RESTART:
-$!
-$! Define An App Counter And Set It To "0".
-$!
-$ APP_COUNTER = 0
-$!
-$! Top Of The App Loop.
-$!
-$ NEXT_APP:
-$!
-$! Make The Application File Name
-$!
-$ CURRENT_APP = F$EDIT(F$ELEMENT(APP_COUNTER,",",PROGRAMS),"TRIM")
-$!
-$! Create The Executable File Name.
-$!
-$ EXE_FILE = EXE_DIR + CURRENT_APP + ".EXE"
-$!
-$! Check To See If We Are At The End Of The File List.
-$!
-$ IF (CURRENT_APP.EQS.",")
-$ THEN
-$ IF (PHASE.EQS."LIB")
-$ THEN
-$ PHASE := APP
-$ GOTO RESTART
-$ ELSE
-$ GOTO APP_DONE
-$ ENDIF
-$ ENDIF
-$!
-$! Increment The Counter.
-$!
-$ APP_COUNTER = APP_COUNTER + 1
-$!
-$! Decide if we're building the object files or not.
-$!
-$ IF (PHASE.EQS."LIB")
-$ THEN
-$!
-$! Define A Library File Counter And Set It To "-1".
-$! -1 Means The Application File Name Is To Be Used.
-$!
-$ LIB_COUNTER = -1
-$!
-$! Create a .OPT file for the object files
-$!
-$ OPEN/WRITE OBJECTS 'EXE_DIR''CURRENT_APP'.OPT
-$!
-$! Top Of The File Loop.
-$!
-$ NEXT_LIB:
-$!
-$! O.K, Extract The File Name From The File List.
-$!
-$ IF LIB_COUNTER .GE. 0
-$ THEN
-$ FILE_NAME = F$EDIT(F$ELEMENT(LIB_COUNTER,",",LIB_'CURRENT_APP'),"TRIM")
-$ ELSE
-$ FILE_NAME = CURRENT_APP
-$ ENDIF
-$!
-$! Check To See If We Are At The End Of The File List.
-$!
-$ IF (FILE_NAME.EQS.",")
-$ THEN
-$ CLOSE OBJECTS
-$ GOTO NEXT_APP
-$ ENDIF
-$!
-$! Increment The Counter.
-$!
-$ LIB_COUNTER = LIB_COUNTER + 1
-$!
-$! Create The Source File Name.
-$!
-$ SOURCE_FILE = "SYS$DISK:[]" + FILE_NAME + ".C"
-$!
-$! Create The Object File Name.
-$!
-$ OBJECT_FILE = OBJ_DIR + FILE_NAME + ".OBJ"
-$ ON WARNING THEN GOTO NEXT_LIB
-$!
-$! Check To See If The File We Want To Compile Actually Exists.
-$!
-$ IF (F$SEARCH(SOURCE_FILE).EQS."")
-$ THEN
-$!
-$! Tell The User That The File Dosen't Exist.
-$!
-$ WRITE SYS$OUTPUT ""
-$ WRITE SYS$OUTPUT "The File ",SOURCE_FILE," Dosen't Exist."
-$ WRITE SYS$OUTPUT ""
-$!
-$! Exit The Build.
-$!
-$ GOTO EXIT
-$!
-$! End The File Exist Check.
-$!
-$ ENDIF
-$!
-$! Tell The User What We Are Building.
-$!
-$ IF (PHASE.EQS."LIB")
-$ THEN
-$ WRITE SYS$OUTPUT "Compiling The ",FILE_NAME,".C File."
-$ ELSE
-$ WRITE SYS$OUTPUT "Building The ",FILE_NAME," Application Program."
-$ ENDIF
-$!
-$! Compile The File.
-$!
-$ ON ERROR THEN GOTO NEXT_LIB
-$ IF COMPILEWITH_CC2 - FILE_NAME .NES. COMPILEWITH_CC2
-$ THEN
-$ CC2/OBJECT='OBJECT_FILE' 'SOURCE_FILE'
-$ ELSE
-$ CC/OBJECT='OBJECT_FILE' 'SOURCE_FILE'
-$ ENDIF
-$ WRITE OBJECTS OBJECT_FILE
-$!
-$ GOTO NEXT_LIB
-$ ENDIF
-$!
-$! Check if this program works well without a TCPIP library
-$!
-$ IF TCPIP_LIB .EQS. "" .AND. TCPIP_PROGRAMS - CURRENT_APP .NES. TCPIP_PROGRAMS
-$ THEN
-$ WRITE SYS$OUTPUT CURRENT_APP," needs a TCP/IP library. Can't link. Skipping..."
-$ GOTO NEXT_APP
-$ ENDIF
-$!
-$! Link The Program.
-$! Check To See If We Are To Link With A Specific TCP/IP Library.
-$!
-$ ON WARNING THEN GOTO NEXT_APP
-$!
-$ IF (TCPIP_LIB.NES."")
-$ THEN
-$!
-$! Don't Link With The RSAREF Routines And TCP/IP Library.
-$!
-$ LINK/'DEBUGGER'/'TRACEBACK' /EXE='EXE_FILE' -
- 'EXE_DIR''CURRENT_APP'.OPT/OPTION, -
- 'SSL_LIB'/LIBRARY,'CRYPTO_LIB'/LIBRARY, -
- 'TCPIP_LIB','OPT_FILE'/OPTION
-$!
-$! Else...
-$!
-$ ELSE
-$!
-$! Don't Link With The RSAREF Routines And Link With A TCP/IP Library.
-$!
-$ LINK/'DEBUGGER'/'TRACEBACK' /EXE='EXE_FILE' -
- 'EXE_DIR''CURRENT_APP'.OPT/OPTION, -
- 'SSL_LIB'/LIBRARY,'CRYPTO_LIB'/LIBRARY, -
- 'OPT_FILE'/OPTION
-$!
-$! End The TCP/IP Library Check.
-$!
-$ ENDIF
-$!
-$! Go Back And Do It Again.
-$!
-$ GOTO NEXT_APP
-$!
-$! All Done With This File.
-$!
-$ APP_DONE:
-$ EXIT:
-$!
-$! All Done, Time To Clean Up And Exit.
-$!
-$ GOSUB CLEANUP
-$ EXIT
-$!
-$! Check For The Link Option FIle.
-$!
-$ CHECK_OPT_FILE:
-$!
-$! Check To See If We Need To Make A VAX C Option File.
-$!
-$ IF (COMPILER.EQS."VAXC")
-$ THEN
-$!
-$! Check To See If We Already Have A VAX C Linker Option File.
-$!
-$ IF (F$SEARCH(OPT_FILE).EQS."")
-$ THEN
-$!
-$! We Need A VAX C Linker Option File.
-$!
-$ CREATE 'OPT_FILE'
-$DECK
-!
-! Default System Options File To Link Agianst
-! The Sharable VAX C Runtime Library.
-!
-SYS$SHARE:VAXCRTL.EXE/SHARE
-$EOD
-$!
-$! End The Option File Check.
-$!
-$ ENDIF
-$!
-$! End The VAXC Check.
-$!
-$ ENDIF
-$!
-$! Check To See If We Need A GNU C Option File.
-$!
-$ IF (COMPILER.EQS."GNUC")
-$ THEN
-$!
-$! Check To See If We Already Have A GNU C Linker Option File.
-$!
-$ IF (F$SEARCH(OPT_FILE).EQS."")
-$ THEN
-$!
-$! We Need A GNU C Linker Option File.
-$!
-$ CREATE 'OPT_FILE'
-$DECK
-!
-! Default System Options File To Link Agianst
-! The Sharable C Runtime Library.
-!
-GNU_CC:[000000]GCCLIB/LIBRARY
-SYS$SHARE:VAXCRTL/SHARE
-$EOD
-$!
-$! End The Option File Check.
-$!
-$ ENDIF
-$!
-$! End The GNU C Check.
-$!
-$ ENDIF
-$!
-$! Check To See If We Need A DEC C Option File.
-$!
-$ IF (COMPILER.EQS."DECC")
-$ THEN
-$!
-$! Check To See If We Already Have A DEC C Linker Option File.
-$!
-$ IF (F$SEARCH(OPT_FILE).EQS."")
-$ THEN
-$!
-$! Figure Out If We Need An AXP Or A VAX Linker Option File.
-$!
-$ IF ARCH.EQS."VAX"
-$ THEN
-$!
-$! We Need A DEC C Linker Option File For VAX.
-$!
-$ CREATE 'OPT_FILE'
-$DECK
-!
-! Default System Options File To Link Agianst
-! The Sharable DEC C Runtime Library.
-!
-SYS$SHARE:DECC$SHR.EXE/SHARE
-$EOD
-$!
-$! Else...
-$!
-$ ELSE
-$!
-$! Create The non-VAX Linker Option File.
-$!
-$ CREATE 'OPT_FILE'
-$DECK
-!
-! Default System Options File For non-VAX To Link Agianst
-! The Sharable C Runtime Library.
-!
-SYS$SHARE:CMA$OPEN_LIB_SHR/SHARE
-SYS$SHARE:CMA$OPEN_RTL/SHARE
-$EOD
-$!
-$! End The DEC C Option File Check.
-$!
-$ ENDIF
-$!
-$! End The Option File Search.
-$!
-$ ENDIF
-$!
-$! End The DEC C Check.
-$!
-$ ENDIF
-$!
-$! Tell The User What Linker Option File We Are Using.
-$!
-$ WRITE SYS$OUTPUT "Using Linker Option File ",OPT_FILE,"."
-$!
-$! Time To RETURN.
-$!
-$ RETURN
-$!
-$! Check To See If We Have The Appropiate Libraries.
-$!
-$ LIB_CHECK:
-$!
-$! Look For The Library LIBCRYPTO.OLB.
-$!
-$ IF (F$SEARCH(CRYPTO_LIB).EQS."")
-$ THEN
-$!
-$! Tell The User We Can't Find The LIBCRYPTO.OLB Library.
-$!
-$ WRITE SYS$OUTPUT ""
-$ WRITE SYS$OUTPUT "Can't Find The Library ",CRYPTO_LIB,"."
-$ WRITE SYS$OUTPUT "We Can't Link Without It."
-$ WRITE SYS$OUTPUT ""
-$!
-$! Since We Can't Link Without It, Exit.
-$!
-$ EXIT
-$!
-$! End The Crypto Library Check.
-$!
-$ ENDIF
-$!
-$! Look For The Library LIBSSL.OLB.
-$!
-$ IF (F$SEARCH(SSL_LIB).EQS."")
-$ THEN
-$!
-$! Tell The User We Can't Find The LIBSSL.OLB Library.
-$!
-$ WRITE SYS$OUTPUT ""
-$ WRITE SYS$OUTPUT "Can't Find The Library ",SSL_LIB,"."
-$ WRITE SYS$OUTPUT "Some Of The Test Programs Need To Link To It."
-$ WRITE SYS$OUTPUT ""
-$!
-$! Since We Can't Link Without It, Exit.
-$!
-$ EXIT
-$!
-$! End The SSL Library Check.
-$!
-$ ENDIF
-$!
-$! Time To Return.
-$!
-$ RETURN
-$!
-$! Check The User's Options.
-$!
-$ CHECK_OPTIONS:
-$!
-$! Check To See If P1 Is Blank.
-$!
-$ IF (P1.EQS."NODEBUG")
-$ THEN
-$!
-$! P1 Is NODEBUG, So Compile Without Debugger Information.
-$!
-$ DEBUGGER = "NODEBUG"
-$ TRACEBACK = "NOTRACEBACK"
-$ GCC_OPTIMIZE = "OPTIMIZE"
-$ CC_OPTIMIZE = "OPTIMIZE"
-$ WRITE SYS$OUTPUT "No Debugger Information Will Be Produced During Compile."
-$ WRITE SYS$OUTPUT "Compiling With Compiler Optimization."
-$!
-$! Else...
-$!
-$ ELSE
-$!
-$! Check To See If We Are To Compile With Debugger Information.
-$!
-$ IF (P1.EQS."DEBUG")
-$ THEN
-$!
-$! Compile With Debugger Information.
-$!
-$ DEBUGGER = "DEBUG"
-$ TRACEBACK = "TRACEBACK"
-$ GCC_OPTIMIZE = "NOOPTIMIZE"
-$ CC_OPTIMIZE = "NOOPTIMIZE"
-$ WRITE SYS$OUTPUT "Debugger Information Will Be Produced During Compile."
-$ WRITE SYS$OUTPUT "Compiling Without Compiler Optimization."
-$ ELSE
-$!
-$! Tell The User Entered An Invalid Option..
-$!
-$ WRITE SYS$OUTPUT ""
-$ WRITE SYS$OUTPUT "The Option ",P1," Is Invalid. The Valid Options Are:"
-$ WRITE SYS$OUTPUT ""
-$ WRITE SYS$OUTPUT " DEBUG : Compile With The Debugger Information."
-$ WRITE SYS$OUTPUT " NODEBUG : Compile Without The Debugger Information."
-$ WRITE SYS$OUTPUT ""
-$!
-$! Time To EXIT.
-$!
-$ EXIT
-$!
-$! End The Valid Argument Check.
-$!
-$ ENDIF
-$!
-$! End The P1 Check.
-$!
-$ ENDIF
-$!
-$! Check To See If P6 Is Blank.
-$!
-$ IF (P6.EQS."")
-$ THEN
-$ POINTER_SIZE = ""
-$ ELSE
-$!
-$! Check is P6 Is Valid
-$!
-$ IF (P6.EQS."32")
-$ THEN
-$ POINTER_SIZE = "/POINTER_SIZE=32"
-$ IF ARCH .EQS. "VAX"
-$ THEN
-$ LIB32 = ""
-$ ELSE
-$ LIB32 = "32"
-$ ENDIF
-$ ELSE
-$ IF (P6.EQS."64")
-$ THEN
-$ LIB32 = ""
-$ IF ARCH .EQS. "VAX"
-$ THEN
-$ POINTER_SIZE = "/POINTER_SIZE=32"
-$ ELSE
-$ POINTER_SIZE = "/POINTER_SIZE=64"
-$ ENDIF
-$ ELSE
-$!
-$! Tell The User Entered An Invalid Option..
-$!
-$ WRITE SYS$OUTPUT ""
-$ WRITE SYS$OUTPUT "The Option ",P6," Is Invalid. The Valid Options Are:"
-$ WRITE SYS$OUTPUT ""
-$ WRITE SYS$OUTPUT " 32 : Compile with 32 bit pointer size"
-$ WRITE SYS$OUTPUT " 64 : Compile with 64 bit pointer size"
-$ WRITE SYS$OUTPUT ""
-$!
-$! Time To EXIT.
-$!
-$ GOTO TIDY
-$!
-$! End The Valid Arguement Check.
-$!
-$ ENDIF
-$ ENDIF
-$!
-$! End The P6 Check.
-$!
-$ ENDIF
-$!
-$! Check To See If P2 Is Blank.
-$!
-$ IF (P2.EQS."")
-$ THEN
-$!
-$! O.K., The User Didn't Specify A Compiler, Let's Try To
-$! Find Out Which One To Use.
-$!
-$! Check To See If We Have GNU C.
-$!
-$ IF (F$TRNLNM("GNU_CC").NES."")
-$ THEN
-$!
-$! Looks Like GNUC, Set To Use GNUC.
-$!
-$ P2 = "GNUC"
-$!
-$! Else...
-$!
-$ ELSE
-$!
-$! Check To See If We Have VAXC Or DECC.
-$!
-$ IF (ARCH.NES."VAX").OR.(F$TRNLNM("DECC$CC_DEFAULT").NES."")
-$ THEN
-$!
-$! Looks Like DECC, Set To Use DECC.
-$!
-$ P2 = "DECC"
-$!
-$! Else...
-$!
-$ ELSE
-$!
-$! Looks Like VAXC, Set To Use VAXC.
-$!
-$ P2 = "VAXC"
-$!
-$! End The VAXC Compiler Check.
-$!
-$ ENDIF
-$!
-$! End The DECC & VAXC Compiler Check.
-$!
-$ ENDIF
-$!
-$! End The Compiler Check.
-$!
-$ ENDIF
-$!
-$! Check To See If We Have A Option For P3.
-$!
-$ IF (P3.EQS."")
-$ THEN
-$!
-$! Find out what socket library we have available
-$!
-$ IF F$PARSE("SOCKETSHR:") .NES. ""
-$ THEN
-$!
-$! We have SOCKETSHR, and it is my opinion that it's the best to use.
-$!
-$ P3 = "SOCKETSHR"
-$!
-$! Tell the user
-$!
-$ WRITE SYS$OUTPUT "Using SOCKETSHR for TCP/IP"
-$!
-$! Else, let's look for something else
-$!
-$ ELSE
-$!
-$! Like UCX (the reason to do this before Multinet is that the UCX
-$! emulation is easier to use...)
-$!
-$ IF F$TRNLNM("UCX$IPC_SHR") .NES. "" -
- .OR. F$PARSE("SYS$SHARE:UCX$IPC_SHR.EXE") .NES. "" -
- .OR. F$PARSE("SYS$LIBRARY:UCX$IPC.OLB") .NES. ""
-$ THEN
-$!
-$! Last resort: a UCX or UCX-compatible library
-$!
-$ P3 = "UCX"
-$!
-$! Tell the user
-$!
-$ WRITE SYS$OUTPUT "Using UCX or an emulation thereof for TCP/IP"
-$!
-$! That was all...
-$!
-$ ENDIF
-$ ENDIF
-$ ENDIF
-$!
-$! Set Up Initial CC Definitions, Possibly With User Ones
-$!
-$ CCDEFS = "MONOLITH"
-$ IF F$TYPE(USER_CCDEFS) .NES. "" THEN CCDEFS = CCDEFS + "," + USER_CCDEFS
-$ CCEXTRAFLAGS = ""
-$ IF F$TYPE(USER_CCFLAGS) .NES. "" THEN CCEXTRAFLAGS = USER_CCFLAGS
-$ CCDISABLEWARNINGS = "LONGLONGTYPE,LONGLONGSUFX,FOUNDCR"
-$ IF F$TYPE(USER_CCDISABLEWARNINGS) .NES. "" THEN -
- CCDISABLEWARNINGS = CCDISABLEWARNINGS + "," + USER_CCDISABLEWARNINGS
-$!
-$! Check To See If The User Entered A Valid Paramter.
-$!
-$ IF (P2.EQS."VAXC").OR.(P2.EQS."DECC").OR.(P2.EQS."GNUC")
-$ THEN
-$!
-$! Check To See If The User Wanted DECC.
-$!
-$ IF (P2.EQS."DECC")
-$ THEN
-$!
-$! Looks Like DECC, Set To Use DECC.
-$!
-$ COMPILER = "DECC"
-$!
-$! Tell The User We Are Using DECC.
-$!
-$ WRITE SYS$OUTPUT "Using DECC 'C' Compiler."
-$!
-$! Use DECC...
-$!
-$ CC = "CC"
-$ IF ARCH.EQS."VAX" .AND. F$TRNLNM("DECC$CC_DEFAULT").NES."/DECC" -
- THEN CC = "CC/DECC"
-$ CC = CC + "/''CC_OPTIMIZE'/''DEBUGGER'/STANDARD=ANSI89''POINTER_SIZE'" + -
- "/NOLIST/PREFIX=ALL" + -
- "/INCLUDE=(SYS$DISK:[-],SYS$DISK:[-.CRYPTO])" + CCEXTRAFLAGS
-$!
-$! Define The Linker Options File Name.
-$!
-$ OPT_FILE = "''EXE_DIR'VAX_DECC_OPTIONS.OPT"
-$!
-$! End DECC Check.
-$!
-$ ENDIF
-$!
-$! Check To See If We Are To Use VAXC.
-$!
-$ IF (P2.EQS."VAXC")
-$ THEN
-$!
-$! Looks Like VAXC, Set To Use VAXC.
-$!
-$ COMPILER = "VAXC"
-$!
-$! Tell The User We Are Using VAX C.
-$ WRITE SYS$OUTPUT "Using VAXC 'C' Compiler."
-$!
-$! Compile Using VAXC.
-$!
-$ CC = "CC"
-$ IF ARCH.NES."VAX"
-$ THEN
-$ WRITE SYS$OUTPUT "There is no VAX C on ''ARCH'!"
-$ EXIT
-$ ENDIF
-$ IF F$TRNLNM("DECC$CC_DEFAULT").EQS."/DECC" THEN CC = "CC/VAXC"
-$ CC = CC + "/''CC_OPTIMIZE'/''DEBUGGER'/NOLIST" + -
- "/INCLUDE=(SYS$DISK:[-],SYS$DISK:[-.CRYPTO])" + CCEXTRAFLAGS
-$ CCDEFS = CCDEFS + ",""VAXC"""
-$!
-$! Define <sys> As SYS$COMMON:[SYSLIB]
-$!
-$ DEFINE/NOLOG SYS SYS$COMMON:[SYSLIB]
-$!
-$! Define The Linker Options File Name.
-$!
-$ OPT_FILE = "''EXE_DIR'VAX_VAXC_OPTIONS.OPT"
-$!
-$! End VAXC Check
-$!
-$ ENDIF
-$!
-$! Check To See If We Are To Use GNU C.
-$!
-$ IF (P2.EQS."GNUC")
-$ THEN
-$!
-$! Looks Like GNUC, Set To Use GNUC.
-$!
-$ COMPILER = "GNUC"
-$!
-$! Tell The User We Are Using GNUC.
-$!
-$ WRITE SYS$OUTPUT "Using GNU 'C' Compiler."
-$!
-$! Use GNU C...
-$!
-$ IF F$TYPE(GCC) .EQS. "" THEN GCC := GCC
-$ CC = GCC+"/NOCASE_HACK/''GCC_OPTIMIZE'/''DEBUGGER'/NOLIST" + -
- "/INCLUDE=(SYS$DISK:[-],SYS$DISK:[-.CRYPTO])" + CCEXTRAFLAGS
-$!
-$! Define The Linker Options File Name.
-$!
-$ OPT_FILE = "''EXE_DIR'VAX_GNUC_OPTIONS.OPT"
-$!
-$! End The GNU C Check.
-$!
-$ ENDIF
-$!
-$! Set up default defines
-$!
-$ CCDEFS = """FLAT_INC=1""," + CCDEFS
-$!
-$! Else The User Entered An Invalid Argument.
-$!
-$ ELSE
-$!
-$! Tell The User We Don't Know What They Want.
-$!
-$ WRITE SYS$OUTPUT ""
-$ WRITE SYS$OUTPUT "The Option ",P2," Is Invalid. The Valid Options Are:"
-$ WRITE SYS$OUTPUT ""
-$ WRITE SYS$OUTPUT " VAXC : To Compile With VAX C."
-$ WRITE SYS$OUTPUT " DECC : To Compile With DEC C."
-$ WRITE SYS$OUTPUT " GNUC : To Compile With GNU C."
-$ WRITE SYS$OUTPUT ""
-$!
-$! Time To EXIT.
-$!
-$ EXIT
-$ ENDIF
-$!
-$! Time to check the contents, and to make sure we get the correct library.
-$!
-$ IF P3.EQS."SOCKETSHR" .OR. P3.EQS."MULTINET" .OR. P3.EQS."UCX" -
- .OR. P3.EQS."TCPIP" .OR. P3.EQS."NONE"
-$ THEN
-$!
-$! Check to see if SOCKETSHR was chosen
-$!
-$ IF P3.EQS."SOCKETSHR"
-$ THEN
-$!
-$! Set the library to use SOCKETSHR
-$!
-$ TCPIP_LIB = "SYS$DISK:[-.VMS]SOCKETSHR_SHR.OPT/OPT"
-$!
-$! Done with SOCKETSHR
-$!
-$ ENDIF
-$!
-$! Check to see if MULTINET was chosen
-$!
-$ IF P3.EQS."MULTINET"
-$ THEN
-$!
-$! Set the library to use UCX emulation.
-$!
-$ P3 = "UCX"
-$!
-$! Done with MULTINET
-$!
-$ ENDIF
-$!
-$! Check to see if UCX was chosen
-$!
-$ IF P3.EQS."UCX"
-$ THEN
-$!
-$! Set the library to use UCX.
-$!
-$ TCPIP_LIB = "SYS$DISK:[-.VMS]UCX_SHR_DECC.OPT/OPT"
-$ IF F$TRNLNM("UCX$IPC_SHR") .NES. ""
-$ THEN
-$ TCPIP_LIB = "SYS$DISK:[-.VMS]UCX_SHR_DECC_LOG.OPT/OPT"
-$ ELSE
-$ IF COMPILER .NES. "DECC" .AND. ARCH .EQS. "VAX" THEN -
- TCPIP_LIB = "SYS$DISK:[-.VMS]UCX_SHR_VAXC.OPT/OPT"
-$ ENDIF
-$!
-$! Done with UCX
-$!
-$ ENDIF
-$!
-$! Check to see if TCPIP (post UCX) was chosen
-$!
-$ IF P3.EQS."TCPIP"
-$ THEN
-$!
-$! Set the library to use TCPIP.
-$!
-$ TCPIP_LIB = "SYS$DISK:[-.VMS]TCPIP_SHR_DECC.OPT/OPT"
-$!
-$! Done with TCPIP
-$!
-$ ENDIF
-$!
-$! Check to see if NONE was chosen
-$!
-$ IF P3.EQS."NONE"
-$ THEN
-$!
-$! Do not use TCPIP.
-$!
-$ TCPIP_LIB = ""
-$!
-$! Done with TCPIP
-$!
-$ ENDIF
-$!
-$! Add TCP/IP type to CC definitions.
-$!
-$ CCDEFS = CCDEFS + ",TCPIP_TYPE_''P3'"
-$!
-$! Print info
-$!
-$ WRITE SYS$OUTPUT "TCP/IP library spec: ", TCPIP_LIB
-$!
-$! Else The User Entered An Invalid Argument.
-$!
-$ ELSE
-$!
-$! Tell The User We Don't Know What They Want.
-$!
-$ WRITE SYS$OUTPUT ""
-$ WRITE SYS$OUTPUT "The Option ",P3," Is Invalid. The Valid Options Are:"
-$ WRITE SYS$OUTPUT ""
-$ WRITE SYS$OUTPUT " SOCKETSHR : To link with SOCKETSHR TCP/IP library."
-$ WRITE SYS$OUTPUT " UCX : To link with UCX TCP/IP library."
-$ WRITE SYS$OUTPUT " TCPIP : To link with TCPIP (post UCX) TCP/IP library."
-$ WRITE SYS$OUTPUT ""
-$!
-$! Time To EXIT.
-$!
-$ EXIT
-$!
-$! Done with TCP/IP libraries
-$!
-$ ENDIF
-$!
-$! Finish up the definition of CC.
-$!
-$ IF COMPILER .EQS. "DECC"
-$ THEN
-$ IF CCDISABLEWARNINGS .NES. ""
-$ THEN
-$ CCDISABLEWARNINGS = "/WARNING=(DISABLE=(" + CCDISABLEWARNINGS + "))"
-$ ENDIF
-$ ELSE
-$ CCDISABLEWARNINGS = ""
-$ ENDIF
-$ CC2 = CC + "/DEFINE=(" + CCDEFS + ",_POSIX_C_SOURCE)" + CCDISABLEWARNINGS
-$ CC = CC + "/DEFINE=(" + CCDEFS + ")" + CCDISABLEWARNINGS
-$!
-$! Show user the result
-$!
-$ WRITE/SYMBOL SYS$OUTPUT "Main Compiling Command: ",CC
-$!
-$! Special Threads For OpenVMS v7.1 Or Later
-$!
-$! Written By: Richard Levitte
-$! richard@levitte.org
-$!
-$!
-$! Check To See If We Have A Option For P4.
-$!
-$ IF (P4.EQS."")
-$ THEN
-$!
-$! Get The Version Of VMS We Are Using.
-$!
-$ ISSEVEN :=
-$ TMP = F$ELEMENT(0,"-",F$EXTRACT(1,4,F$GETSYI("VERSION")))
-$ TMP = F$INTEGER(F$ELEMENT(0,".",TMP)+F$ELEMENT(1,".",TMP))
-$!
-$! Check To See If The VMS Version Is v7.1 Or Later.
-$!
-$ IF (TMP.GE.71)
-$ THEN
-$!
-$! We Have OpenVMS v7.1 Or Later, So Use The Special Threads.
-$!
-$ ISSEVEN := ,PTHREAD_USE_D4
-$!
-$! End The VMS Version Check.
-$!
-$ ENDIF
-$!
-$! End The P4 Check.
-$!
-$ ENDIF
-$!
-$! Check if the user wanted to compile just a subset of all the programs.
-$!
-$ IF P5 .NES. ""
-$ THEN
-$ PROGRAMS = P5
-$ ENDIF
-$!
-$! Time To RETURN...
-$!
-$ RETURN
-$!
-$ INITIALISE:
-$!
-$! Save old value of the logical name OPENSSL
-$!
-$ __SAVE_OPENSSL = F$TRNLNM("OPENSSL","LNM$PROCESS_TABLE")
-$!
-$! Save directory information
-$!
-$ __HERE = F$PARSE(F$PARSE("A.;",F$ENVIRONMENT("PROCEDURE"))-"A.;","[]A.;") - "A.;"
-$ __HERE = F$EDIT(__HERE,"UPCASE")
-$ __TOP = __HERE - "APPS]"
-$ __INCLUDE = __TOP + "INCLUDE.OPENSSL]"
-$!
-$! Set up the logical name OPENSSL to point at the include directory
-$!
-$ DEFINE OPENSSL/NOLOG '__INCLUDE'
-$!
-$! Done
-$!
-$ RETURN
-$!
-$ CLEANUP:
-$!
-$! Restore the logical name OPENSSL if it had a value
-$!
-$ IF __SAVE_OPENSSL .EQS. ""
-$ THEN
-$ DEASSIGN OPENSSL
-$ ELSE
-$ DEFINE/NOLOG OPENSSL '__SAVE_OPENSSL'
-$ ENDIF
-$!
-$! Done
-$!
-$ RETURN
+$! +$! MAKEAPPS.COM +$! Written By: Robert Byer +$! Vice-President +$! A-Com Computing, Inc. +$! byer@mail.all-net.net +$! +$! Changes by Richard Levitte <richard@levitte.org> +$! Zoltan Arpadffy <zoli@polarhome.com> +$! +$! This command files compiles and creates all the various different +$! "application" programs for the different types of encryption for OpenSSL. +$! The EXE's are placed in the directory [.xxx.EXE.APPS] where "xxx" denotes +$! ALPHA, IA64 or VAX, depending on your machine architecture. +$! +$! It was written so it would try to determine what "C" compiler to +$! use or you can specify which "C" compiler to use. +$! +$! Specify DEBUG or NODEBUG as P1 to compile with or without debugger +$! information. +$! +$! Specify which compiler at P2 to try to compile under. +$! +$! VAXC For VAX C. +$! DECC For DEC C. +$! GNUC For GNU C. +$! +$! If you don't specify a compiler, it will try to determine which +$! "C" compiler to use. +$! +$! P3, if defined, sets a TCP/IP library to use, through one of the following +$! keywords: +$! +$! UCX for UCX +$! SOCKETSHR for SOCKETSHR+NETLIB +$! TCPIP for TCPIP (post UCX) +$! +$! P4, if defined, sets a compiler thread NOT needed on OpenVMS 7.1 (and up) +$! +$! P5, if defined, sets a choice of programs to compile. +$! +$! For 64 bit architectures (Alpha and IA64), specify the pointer size as P6. +$! For 32 bit architectures (VAX), P6 is ignored. +$! Currently supported values are: +$! +$! 32 To ge a library compiled with /POINTER_SIZE=32 +$! 64 To ge a library compiled with /POINTER_SIZE=64 +$! +$! +$! Define A TCP/IP Library That We Will Need To Link To. +$! (That Is, If We Need To Link To One.) +$! +$ TCPIP_LIB = "" +$! +$! Check What Architecture We Are Using. +$! +$ IF (F$GETSYI("CPU").LT.128) +$ THEN +$! +$! The Architecture Is VAX. +$! +$ ARCH = "VAX" +$! +$! Else... +$! +$ ELSE +$! +$! The Architecture Is Alpha, IA64 or whatever comes in the future. +$! +$ ARCH = F$EDIT( F$GETSYI( "ARCH_NAME"), "UPCASE") +$ IF (ARCH .EQS. "") THEN ARCH = "UNK" +$! +$! End The Architecture Check. +$! +$ ENDIF +$! +$! Define what programs should be compiled +$! +$ PROGRAMS := OPENSSL +$! +$! Define The CRYPTO Library. +$! +$ CRYPTO_LIB := SYS$DISK:[-.'ARCH'.EXE.CRYPTO]LIBCRYPTO'LIB32'.OLB +$! +$! Define The SSL Library. +$! +$ SSL_LIB := SYS$DISK:[-.'ARCH'.EXE.SSL]LIBSSL'LIB32'.OLB +$! +$! Define The OBJ Directory. +$! +$ OBJ_DIR := SYS$DISK:[-.'ARCH'.OBJ.APPS] +$! +$! Define The EXE Directory. +$! +$ EXE_DIR := SYS$DISK:[-.'ARCH'.EXE.APPS] +$! +$! Check To Make Sure We Have Valid Command Line Parameters. +$! +$ GOSUB CHECK_OPTIONS +$! +$! Initialise logical names and such +$! +$ GOSUB INITIALISE +$! +$! Tell The User What Kind of Machine We Run On. +$! +$ WRITE SYS$OUTPUT "Compiling On A ",ARCH," Machine." +$! +$! Check To See If The OBJ Directory Exists. +$! +$ IF (F$PARSE(OBJ_DIR).EQS."") +$ THEN +$! +$! It Dosen't Exist, So Create It. +$! +$ CREATE/DIRECTORY 'OBJ_DIR' +$! +$! End The OBJ Directory Check. +$! +$ ENDIF +$! +$! Check To See If The EXE Directory Exists. +$! +$ IF (F$PARSE(EXE_DIR).EQS."") +$ THEN +$! +$! It Dosen't Exist, So Create It. +$! +$ CREATE/DIRECTORY 'EXE_DIR' +$! +$! End The EXE Directory Check. +$! +$ ENDIF +$! +$! Check To See If We Have The Proper Libraries. +$! +$ GOSUB LIB_CHECK +$! +$! Check To See If We Have A Linker Option File. +$! +$ GOSUB CHECK_OPT_FILE +$! +$! Define The Application Files. +$! NOTE: Some might think this list ugly. However, it's made this way to +$! reflect the E_OBJ variable in Makefile as closely as possible, thereby +$! making it fairly easy to verify that the lists are the same. +$! +$ LIB_OPENSSL = "VERIFY,ASN1PARS,REQ,DGST,DH,DHPARAM,ENC,PASSWD,GENDH,ERRSTR,"+- + "CA,PKCS7,CRL2P7,CRL,"+- + "RSA,RSAUTL,DSA,DSAPARAM,EC,ECPARAM,"+- + "X509,GENRSA,GENDSA,GENPKEY,S_SERVER,S_CLIENT,SPEED,"+- + "S_TIME,APPS,S_CB,S_SOCKET,APP_RAND,VERSION,SESS_ID,"+- + "CIPHERS,NSEQ,PKCS12,PKCS8,PKEY,PKEYPARAM,PKEYUTL,"+ - + "SPKAC,SMIME,CMS,RAND,ENGINE,OCSP,PRIME,TS" +$ TCPIP_PROGRAMS = ",," +$ IF COMPILER .EQS. "VAXC" THEN - + TCPIP_PROGRAMS = ",OPENSSL," +$! +$! Setup exceptional compilations +$! +$ COMPILEWITH_CC2 = ",S_SOCKET,S_SERVER,S_CLIENT," +$! +$ PHASE := LIB +$! +$ RESTART: +$! +$! Define An App Counter And Set It To "0". +$! +$ APP_COUNTER = 0 +$! +$! Top Of The App Loop. +$! +$ NEXT_APP: +$! +$! Make The Application File Name +$! +$ CURRENT_APP = F$EDIT(F$ELEMENT(APP_COUNTER,",",PROGRAMS),"TRIM") +$! +$! Create The Executable File Name. +$! +$ EXE_FILE = EXE_DIR + CURRENT_APP + ".EXE" +$! +$! Check To See If We Are At The End Of The File List. +$! +$ IF (CURRENT_APP.EQS.",") +$ THEN +$ IF (PHASE.EQS."LIB") +$ THEN +$ PHASE := APP +$ GOTO RESTART +$ ELSE +$ GOTO APP_DONE +$ ENDIF +$ ENDIF +$! +$! Increment The Counter. +$! +$ APP_COUNTER = APP_COUNTER + 1 +$! +$! Decide if we're building the object files or not. +$! +$ IF (PHASE.EQS."LIB") +$ THEN +$! +$! Define A Library File Counter And Set It To "-1". +$! -1 Means The Application File Name Is To Be Used. +$! +$ LIB_COUNTER = -1 +$! +$! Create a .OPT file for the object files +$! +$ OPEN/WRITE OBJECTS 'EXE_DIR''CURRENT_APP'.OPT +$! +$! Top Of The File Loop. +$! +$ NEXT_LIB: +$! +$! O.K, Extract The File Name From The File List. +$! +$ IF LIB_COUNTER .GE. 0 +$ THEN +$ FILE_NAME = F$EDIT(F$ELEMENT(LIB_COUNTER,",",LIB_'CURRENT_APP'),"TRIM") +$ ELSE +$ FILE_NAME = CURRENT_APP +$ ENDIF +$! +$! Check To See If We Are At The End Of The File List. +$! +$ IF (FILE_NAME.EQS.",") +$ THEN +$ CLOSE OBJECTS +$ GOTO NEXT_APP +$ ENDIF +$! +$! Increment The Counter. +$! +$ LIB_COUNTER = LIB_COUNTER + 1 +$! +$! Create The Source File Name. +$! +$ SOURCE_FILE = "SYS$DISK:[]" + FILE_NAME + ".C" +$! +$! Create The Object File Name. +$! +$ OBJECT_FILE = OBJ_DIR + FILE_NAME + ".OBJ" +$ ON WARNING THEN GOTO NEXT_LIB +$! +$! Check To See If The File We Want To Compile Actually Exists. +$! +$ IF (F$SEARCH(SOURCE_FILE).EQS."") +$ THEN +$! +$! Tell The User That The File Dosen't Exist. +$! +$ WRITE SYS$OUTPUT "" +$ WRITE SYS$OUTPUT "The File ",SOURCE_FILE," Dosen't Exist." +$ WRITE SYS$OUTPUT "" +$! +$! Exit The Build. +$! +$ GOTO EXIT +$! +$! End The File Exist Check. +$! +$ ENDIF +$! +$! Tell The User What We Are Building. +$! +$ IF (PHASE.EQS."LIB") +$ THEN +$ WRITE SYS$OUTPUT "Compiling The ",FILE_NAME,".C File." +$ ELSE +$ WRITE SYS$OUTPUT "Building The ",FILE_NAME," Application Program." +$ ENDIF +$! +$! Compile The File. +$! +$ ON ERROR THEN GOTO NEXT_LIB +$ IF COMPILEWITH_CC2 - FILE_NAME .NES. COMPILEWITH_CC2 +$ THEN +$ CC2/OBJECT='OBJECT_FILE' 'SOURCE_FILE' +$ ELSE +$ CC/OBJECT='OBJECT_FILE' 'SOURCE_FILE' +$ ENDIF +$ WRITE OBJECTS OBJECT_FILE +$! +$ GOTO NEXT_LIB +$ ENDIF +$! +$! Check if this program works well without a TCPIP library +$! +$ IF TCPIP_LIB .EQS. "" .AND. TCPIP_PROGRAMS - CURRENT_APP .NES. TCPIP_PROGRAMS +$ THEN +$ WRITE SYS$OUTPUT CURRENT_APP," needs a TCP/IP library. Can't link. Skipping..." +$ GOTO NEXT_APP +$ ENDIF +$! +$! Link The Program. +$! Check To See If We Are To Link With A Specific TCP/IP Library. +$! +$ ON WARNING THEN GOTO NEXT_APP +$! +$ IF (TCPIP_LIB.NES."") +$ THEN +$! +$! Don't Link With The RSAREF Routines And TCP/IP Library. +$! +$ LINK/'DEBUGGER'/'TRACEBACK' /EXE='EXE_FILE' - + 'EXE_DIR''CURRENT_APP'.OPT/OPTION, - + 'SSL_LIB'/LIBRARY,'CRYPTO_LIB'/LIBRARY, - + 'TCPIP_LIB','OPT_FILE'/OPTION +$! +$! Else... +$! +$ ELSE +$! +$! Don't Link With The RSAREF Routines And Link With A TCP/IP Library. +$! +$ LINK/'DEBUGGER'/'TRACEBACK' /EXE='EXE_FILE' - + 'EXE_DIR''CURRENT_APP'.OPT/OPTION, - + 'SSL_LIB'/LIBRARY,'CRYPTO_LIB'/LIBRARY, - + 'OPT_FILE'/OPTION +$! +$! End The TCP/IP Library Check. +$! +$ ENDIF +$! +$! Go Back And Do It Again. +$! +$ GOTO NEXT_APP +$! +$! All Done With This File. +$! +$ APP_DONE: +$ EXIT: +$! +$! All Done, Time To Clean Up And Exit. +$! +$ GOSUB CLEANUP +$ EXIT +$! +$! Check For The Link Option FIle. +$! +$ CHECK_OPT_FILE: +$! +$! Check To See If We Need To Make A VAX C Option File. +$! +$ IF (COMPILER.EQS."VAXC") +$ THEN +$! +$! Check To See If We Already Have A VAX C Linker Option File. +$! +$ IF (F$SEARCH(OPT_FILE).EQS."") +$ THEN +$! +$! We Need A VAX C Linker Option File. +$! +$ CREATE 'OPT_FILE' +$DECK +! +! Default System Options File To Link Agianst +! The Sharable VAX C Runtime Library. +! +SYS$SHARE:VAXCRTL.EXE/SHARE +$EOD +$! +$! End The Option File Check. +$! +$ ENDIF +$! +$! End The VAXC Check. +$! +$ ENDIF +$! +$! Check To See If We Need A GNU C Option File. +$! +$ IF (COMPILER.EQS."GNUC") +$ THEN +$! +$! Check To See If We Already Have A GNU C Linker Option File. +$! +$ IF (F$SEARCH(OPT_FILE).EQS."") +$ THEN +$! +$! We Need A GNU C Linker Option File. +$! +$ CREATE 'OPT_FILE' +$DECK +! +! Default System Options File To Link Agianst +! The Sharable C Runtime Library. +! +GNU_CC:[000000]GCCLIB/LIBRARY +SYS$SHARE:VAXCRTL/SHARE +$EOD +$! +$! End The Option File Check. +$! +$ ENDIF +$! +$! End The GNU C Check. +$! +$ ENDIF +$! +$! Check To See If We Need A DEC C Option File. +$! +$ IF (COMPILER.EQS."DECC") +$ THEN +$! +$! Check To See If We Already Have A DEC C Linker Option File. +$! +$ IF (F$SEARCH(OPT_FILE).EQS."") +$ THEN +$! +$! Figure Out If We Need An AXP Or A VAX Linker Option File. +$! +$ IF ARCH.EQS."VAX" +$ THEN +$! +$! We Need A DEC C Linker Option File For VAX. +$! +$ CREATE 'OPT_FILE' +$DECK +! +! Default System Options File To Link Agianst +! The Sharable DEC C Runtime Library. +! +SYS$SHARE:DECC$SHR.EXE/SHARE +$EOD +$! +$! Else... +$! +$ ELSE +$! +$! Create The non-VAX Linker Option File. +$! +$ CREATE 'OPT_FILE' +$DECK +! +! Default System Options File For non-VAX To Link Agianst +! The Sharable C Runtime Library. +! +SYS$SHARE:CMA$OPEN_LIB_SHR/SHARE +SYS$SHARE:CMA$OPEN_RTL/SHARE +$EOD +$! +$! End The DEC C Option File Check. +$! +$ ENDIF +$! +$! End The Option File Search. +$! +$ ENDIF +$! +$! End The DEC C Check. +$! +$ ENDIF +$! +$! Tell The User What Linker Option File We Are Using. +$! +$ WRITE SYS$OUTPUT "Using Linker Option File ",OPT_FILE,"." +$! +$! Time To RETURN. +$! +$ RETURN +$! +$! Check To See If We Have The Appropiate Libraries. +$! +$ LIB_CHECK: +$! +$! Look For The Library LIBCRYPTO.OLB. +$! +$ IF (F$SEARCH(CRYPTO_LIB).EQS."") +$ THEN +$! +$! Tell The User We Can't Find The LIBCRYPTO.OLB Library. +$! +$ WRITE SYS$OUTPUT "" +$ WRITE SYS$OUTPUT "Can't Find The Library ",CRYPTO_LIB,"." +$ WRITE SYS$OUTPUT "We Can't Link Without It." +$ WRITE SYS$OUTPUT "" +$! +$! Since We Can't Link Without It, Exit. +$! +$ EXIT +$! +$! End The Crypto Library Check. +$! +$ ENDIF +$! +$! Look For The Library LIBSSL.OLB. +$! +$ IF (F$SEARCH(SSL_LIB).EQS."") +$ THEN +$! +$! Tell The User We Can't Find The LIBSSL.OLB Library. +$! +$ WRITE SYS$OUTPUT "" +$ WRITE SYS$OUTPUT "Can't Find The Library ",SSL_LIB,"." +$ WRITE SYS$OUTPUT "Some Of The Test Programs Need To Link To It." +$ WRITE SYS$OUTPUT "" +$! +$! Since We Can't Link Without It, Exit. +$! +$ EXIT +$! +$! End The SSL Library Check. +$! +$ ENDIF +$! +$! Time To Return. +$! +$ RETURN +$! +$! Check The User's Options. +$! +$ CHECK_OPTIONS: +$! +$! Check To See If P1 Is Blank. +$! +$ IF (P1.EQS."NODEBUG") +$ THEN +$! +$! P1 Is NODEBUG, So Compile Without Debugger Information. +$! +$ DEBUGGER = "NODEBUG" +$ TRACEBACK = "NOTRACEBACK" +$ GCC_OPTIMIZE = "OPTIMIZE" +$ CC_OPTIMIZE = "OPTIMIZE" +$ WRITE SYS$OUTPUT "No Debugger Information Will Be Produced During Compile." +$ WRITE SYS$OUTPUT "Compiling With Compiler Optimization." +$! +$! Else... +$! +$ ELSE +$! +$! Check To See If We Are To Compile With Debugger Information. +$! +$ IF (P1.EQS."DEBUG") +$ THEN +$! +$! Compile With Debugger Information. +$! +$ DEBUGGER = "DEBUG" +$ TRACEBACK = "TRACEBACK" +$ GCC_OPTIMIZE = "NOOPTIMIZE" +$ CC_OPTIMIZE = "NOOPTIMIZE" +$ WRITE SYS$OUTPUT "Debugger Information Will Be Produced During Compile." +$ WRITE SYS$OUTPUT "Compiling Without Compiler Optimization." +$ ELSE +$! +$! Tell The User Entered An Invalid Option.. +$! +$ WRITE SYS$OUTPUT "" +$ WRITE SYS$OUTPUT "The Option ",P1," Is Invalid. The Valid Options Are:" +$ WRITE SYS$OUTPUT "" +$ WRITE SYS$OUTPUT " DEBUG : Compile With The Debugger Information." +$ WRITE SYS$OUTPUT " NODEBUG : Compile Without The Debugger Information." +$ WRITE SYS$OUTPUT "" +$! +$! Time To EXIT. +$! +$ EXIT +$! +$! End The Valid Argument Check. +$! +$ ENDIF +$! +$! End The P1 Check. +$! +$ ENDIF +$! +$! Check To See If P6 Is Blank. +$! +$ IF (P6.EQS."") +$ THEN +$ POINTER_SIZE = "" +$ ELSE +$! +$! Check is P6 Is Valid +$! +$ IF (P6.EQS."32") +$ THEN +$ POINTER_SIZE = "/POINTER_SIZE=32" +$ IF ARCH .EQS. "VAX" +$ THEN +$ LIB32 = "" +$ ELSE +$ LIB32 = "32" +$ ENDIF +$ ELSE +$ IF (P6.EQS."64") +$ THEN +$ LIB32 = "" +$ IF ARCH .EQS. "VAX" +$ THEN +$ POINTER_SIZE = "/POINTER_SIZE=32" +$ ELSE +$ POINTER_SIZE = "/POINTER_SIZE=64" +$ ENDIF +$ ELSE +$! +$! Tell The User Entered An Invalid Option.. +$! +$ WRITE SYS$OUTPUT "" +$ WRITE SYS$OUTPUT "The Option ",P6," Is Invalid. The Valid Options Are:" +$ WRITE SYS$OUTPUT "" +$ WRITE SYS$OUTPUT " 32 : Compile with 32 bit pointer size" +$ WRITE SYS$OUTPUT " 64 : Compile with 64 bit pointer size" +$ WRITE SYS$OUTPUT "" +$! +$! Time To EXIT. +$! +$ GOTO TIDY +$! +$! End The Valid Arguement Check. +$! +$ ENDIF +$ ENDIF +$! +$! End The P6 Check. +$! +$ ENDIF +$! +$! Check To See If P2 Is Blank. +$! +$ IF (P2.EQS."") +$ THEN +$! +$! O.K., The User Didn't Specify A Compiler, Let's Try To +$! Find Out Which One To Use. +$! +$! Check To See If We Have GNU C. +$! +$ IF (F$TRNLNM("GNU_CC").NES."") +$ THEN +$! +$! Looks Like GNUC, Set To Use GNUC. +$! +$ P2 = "GNUC" +$! +$! Else... +$! +$ ELSE +$! +$! Check To See If We Have VAXC Or DECC. +$! +$ IF (ARCH.NES."VAX").OR.(F$TRNLNM("DECC$CC_DEFAULT").NES."") +$ THEN +$! +$! Looks Like DECC, Set To Use DECC. +$! +$ P2 = "DECC" +$! +$! Else... +$! +$ ELSE +$! +$! Looks Like VAXC, Set To Use VAXC. +$! +$ P2 = "VAXC" +$! +$! End The VAXC Compiler Check. +$! +$ ENDIF +$! +$! End The DECC & VAXC Compiler Check. +$! +$ ENDIF +$! +$! End The Compiler Check. +$! +$ ENDIF +$! +$! Check To See If We Have A Option For P3. +$! +$ IF (P3.EQS."") +$ THEN +$! +$! Find out what socket library we have available +$! +$ IF F$PARSE("SOCKETSHR:") .NES. "" +$ THEN +$! +$! We have SOCKETSHR, and it is my opinion that it's the best to use. +$! +$ P3 = "SOCKETSHR" +$! +$! Tell the user +$! +$ WRITE SYS$OUTPUT "Using SOCKETSHR for TCP/IP" +$! +$! Else, let's look for something else +$! +$ ELSE +$! +$! Like UCX (the reason to do this before Multinet is that the UCX +$! emulation is easier to use...) +$! +$ IF F$TRNLNM("UCX$IPC_SHR") .NES. "" - + .OR. F$PARSE("SYS$SHARE:UCX$IPC_SHR.EXE") .NES. "" - + .OR. F$PARSE("SYS$LIBRARY:UCX$IPC.OLB") .NES. "" +$ THEN +$! +$! Last resort: a UCX or UCX-compatible library +$! +$ P3 = "UCX" +$! +$! Tell the user +$! +$ WRITE SYS$OUTPUT "Using UCX or an emulation thereof for TCP/IP" +$! +$! That was all... +$! +$ ENDIF +$ ENDIF +$ ENDIF +$! +$! Set Up Initial CC Definitions, Possibly With User Ones +$! +$ CCDEFS = "MONOLITH" +$ IF F$TYPE(USER_CCDEFS) .NES. "" THEN CCDEFS = CCDEFS + "," + USER_CCDEFS +$ CCEXTRAFLAGS = "" +$ IF F$TYPE(USER_CCFLAGS) .NES. "" THEN CCEXTRAFLAGS = USER_CCFLAGS +$ CCDISABLEWARNINGS = "LONGLONGTYPE,LONGLONGSUFX,FOUNDCR" +$ IF F$TYPE(USER_CCDISABLEWARNINGS) .NES. "" THEN - + CCDISABLEWARNINGS = CCDISABLEWARNINGS + "," + USER_CCDISABLEWARNINGS +$! +$! Check To See If The User Entered A Valid Paramter. +$! +$ IF (P2.EQS."VAXC").OR.(P2.EQS."DECC").OR.(P2.EQS."GNUC") +$ THEN +$! +$! Check To See If The User Wanted DECC. +$! +$ IF (P2.EQS."DECC") +$ THEN +$! +$! Looks Like DECC, Set To Use DECC. +$! +$ COMPILER = "DECC" +$! +$! Tell The User We Are Using DECC. +$! +$ WRITE SYS$OUTPUT "Using DECC 'C' Compiler." +$! +$! Use DECC... +$! +$ CC = "CC" +$ IF ARCH.EQS."VAX" .AND. F$TRNLNM("DECC$CC_DEFAULT").NES."/DECC" - + THEN CC = "CC/DECC" +$ CC = CC + "/''CC_OPTIMIZE'/''DEBUGGER'/STANDARD=ANSI89''POINTER_SIZE'" + - + "/NOLIST/PREFIX=ALL" + - + "/INCLUDE=(SYS$DISK:[-],SYS$DISK:[-.CRYPTO])" + CCEXTRAFLAGS +$! +$! Define The Linker Options File Name. +$! +$ OPT_FILE = "''EXE_DIR'VAX_DECC_OPTIONS.OPT" +$! +$! End DECC Check. +$! +$ ENDIF +$! +$! Check To See If We Are To Use VAXC. +$! +$ IF (P2.EQS."VAXC") +$ THEN +$! +$! Looks Like VAXC, Set To Use VAXC. +$! +$ COMPILER = "VAXC" +$! +$! Tell The User We Are Using VAX C. +$ WRITE SYS$OUTPUT "Using VAXC 'C' Compiler." +$! +$! Compile Using VAXC. +$! +$ CC = "CC" +$ IF ARCH.NES."VAX" +$ THEN +$ WRITE SYS$OUTPUT "There is no VAX C on ''ARCH'!" +$ EXIT +$ ENDIF +$ IF F$TRNLNM("DECC$CC_DEFAULT").EQS."/DECC" THEN CC = "CC/VAXC" +$ CC = CC + "/''CC_OPTIMIZE'/''DEBUGGER'/NOLIST" + - + "/INCLUDE=(SYS$DISK:[-],SYS$DISK:[-.CRYPTO])" + CCEXTRAFLAGS +$ CCDEFS = CCDEFS + ",""VAXC""" +$! +$! Define <sys> As SYS$COMMON:[SYSLIB] +$! +$ DEFINE/NOLOG SYS SYS$COMMON:[SYSLIB] +$! +$! Define The Linker Options File Name. +$! +$ OPT_FILE = "''EXE_DIR'VAX_VAXC_OPTIONS.OPT" +$! +$! End VAXC Check +$! +$ ENDIF +$! +$! Check To See If We Are To Use GNU C. +$! +$ IF (P2.EQS."GNUC") +$ THEN +$! +$! Looks Like GNUC, Set To Use GNUC. +$! +$ COMPILER = "GNUC" +$! +$! Tell The User We Are Using GNUC. +$! +$ WRITE SYS$OUTPUT "Using GNU 'C' Compiler." +$! +$! Use GNU C... +$! +$ IF F$TYPE(GCC) .EQS. "" THEN GCC := GCC +$ CC = GCC+"/NOCASE_HACK/''GCC_OPTIMIZE'/''DEBUGGER'/NOLIST" + - + "/INCLUDE=(SYS$DISK:[-],SYS$DISK:[-.CRYPTO])" + CCEXTRAFLAGS +$! +$! Define The Linker Options File Name. +$! +$ OPT_FILE = "''EXE_DIR'VAX_GNUC_OPTIONS.OPT" +$! +$! End The GNU C Check. +$! +$ ENDIF +$! +$! Set up default defines +$! +$ CCDEFS = """FLAT_INC=1""," + CCDEFS +$! +$! Else The User Entered An Invalid Argument. +$! +$ ELSE +$! +$! Tell The User We Don't Know What They Want. +$! +$ WRITE SYS$OUTPUT "" +$ WRITE SYS$OUTPUT "The Option ",P2," Is Invalid. The Valid Options Are:" +$ WRITE SYS$OUTPUT "" +$ WRITE SYS$OUTPUT " VAXC : To Compile With VAX C." +$ WRITE SYS$OUTPUT " DECC : To Compile With DEC C." +$ WRITE SYS$OUTPUT " GNUC : To Compile With GNU C." +$ WRITE SYS$OUTPUT "" +$! +$! Time To EXIT. +$! +$ EXIT +$ ENDIF +$! +$! Time to check the contents, and to make sure we get the correct library. +$! +$ IF P3.EQS."SOCKETSHR" .OR. P3.EQS."MULTINET" .OR. P3.EQS."UCX" - + .OR. P3.EQS."TCPIP" .OR. P3.EQS."NONE" +$ THEN +$! +$! Check to see if SOCKETSHR was chosen +$! +$ IF P3.EQS."SOCKETSHR" +$ THEN +$! +$! Set the library to use SOCKETSHR +$! +$ TCPIP_LIB = "SYS$DISK:[-.VMS]SOCKETSHR_SHR.OPT/OPT" +$! +$! Done with SOCKETSHR +$! +$ ENDIF +$! +$! Check to see if MULTINET was chosen +$! +$ IF P3.EQS."MULTINET" +$ THEN +$! +$! Set the library to use UCX emulation. +$! +$ P3 = "UCX" +$! +$! Done with MULTINET +$! +$ ENDIF +$! +$! Check to see if UCX was chosen +$! +$ IF P3.EQS."UCX" +$ THEN +$! +$! Set the library to use UCX. +$! +$ TCPIP_LIB = "SYS$DISK:[-.VMS]UCX_SHR_DECC.OPT/OPT" +$ IF F$TRNLNM("UCX$IPC_SHR") .NES. "" +$ THEN +$ TCPIP_LIB = "SYS$DISK:[-.VMS]UCX_SHR_DECC_LOG.OPT/OPT" +$ ELSE +$ IF COMPILER .NES. "DECC" .AND. ARCH .EQS. "VAX" THEN - + TCPIP_LIB = "SYS$DISK:[-.VMS]UCX_SHR_VAXC.OPT/OPT" +$ ENDIF +$! +$! Done with UCX +$! +$ ENDIF +$! +$! Check to see if TCPIP (post UCX) was chosen +$! +$ IF P3.EQS."TCPIP" +$ THEN +$! +$! Set the library to use TCPIP. +$! +$ TCPIP_LIB = "SYS$DISK:[-.VMS]TCPIP_SHR_DECC.OPT/OPT" +$! +$! Done with TCPIP +$! +$ ENDIF +$! +$! Check to see if NONE was chosen +$! +$ IF P3.EQS."NONE" +$ THEN +$! +$! Do not use TCPIP. +$! +$ TCPIP_LIB = "" +$! +$! Done with TCPIP +$! +$ ENDIF +$! +$! Add TCP/IP type to CC definitions. +$! +$ CCDEFS = CCDEFS + ",TCPIP_TYPE_''P3'" +$! +$! Print info +$! +$ WRITE SYS$OUTPUT "TCP/IP library spec: ", TCPIP_LIB +$! +$! Else The User Entered An Invalid Argument. +$! +$ ELSE +$! +$! Tell The User We Don't Know What They Want. +$! +$ WRITE SYS$OUTPUT "" +$ WRITE SYS$OUTPUT "The Option ",P3," Is Invalid. The Valid Options Are:" +$ WRITE SYS$OUTPUT "" +$ WRITE SYS$OUTPUT " SOCKETSHR : To link with SOCKETSHR TCP/IP library." +$ WRITE SYS$OUTPUT " UCX : To link with UCX TCP/IP library." +$ WRITE SYS$OUTPUT " TCPIP : To link with TCPIP (post UCX) TCP/IP library." +$ WRITE SYS$OUTPUT "" +$! +$! Time To EXIT. +$! +$ EXIT +$! +$! Done with TCP/IP libraries +$! +$ ENDIF +$! +$! Finish up the definition of CC. +$! +$ IF COMPILER .EQS. "DECC" +$ THEN +$ IF CCDISABLEWARNINGS .NES. "" +$ THEN +$ CCDISABLEWARNINGS = "/WARNING=(DISABLE=(" + CCDISABLEWARNINGS + "))" +$ ENDIF +$ ELSE +$ CCDISABLEWARNINGS = "" +$ ENDIF +$ CC2 = CC + "/DEFINE=(" + CCDEFS + ",_POSIX_C_SOURCE)" + CCDISABLEWARNINGS +$ CC = CC + "/DEFINE=(" + CCDEFS + ")" + CCDISABLEWARNINGS +$! +$! Show user the result +$! +$ WRITE/SYMBOL SYS$OUTPUT "Main Compiling Command: ",CC +$! +$! Special Threads For OpenVMS v7.1 Or Later +$! +$! Written By: Richard Levitte +$! richard@levitte.org +$! +$! +$! Check To See If We Have A Option For P4. +$! +$ IF (P4.EQS."") +$ THEN +$! +$! Get The Version Of VMS We Are Using. +$! +$ ISSEVEN := +$ TMP = F$ELEMENT(0,"-",F$EXTRACT(1,4,F$GETSYI("VERSION"))) +$ TMP = F$INTEGER(F$ELEMENT(0,".",TMP)+F$ELEMENT(1,".",TMP)) +$! +$! Check To See If The VMS Version Is v7.1 Or Later. +$! +$ IF (TMP.GE.71) +$ THEN +$! +$! We Have OpenVMS v7.1 Or Later, So Use The Special Threads. +$! +$ ISSEVEN := ,PTHREAD_USE_D4 +$! +$! End The VMS Version Check. +$! +$ ENDIF +$! +$! End The P4 Check. +$! +$ ENDIF +$! +$! Check if the user wanted to compile just a subset of all the programs. +$! +$ IF P5 .NES. "" +$ THEN +$ PROGRAMS = P5 +$ ENDIF +$! +$! Time To RETURN... +$! +$ RETURN +$! +$ INITIALISE: +$! +$! Save old value of the logical name OPENSSL +$! +$ __SAVE_OPENSSL = F$TRNLNM("OPENSSL","LNM$PROCESS_TABLE") +$! +$! Save directory information +$! +$ __HERE = F$PARSE(F$PARSE("A.;",F$ENVIRONMENT("PROCEDURE"))-"A.;","[]A.;") - "A.;" +$ __HERE = F$EDIT(__HERE,"UPCASE") +$ __TOP = __HERE - "APPS]" +$ __INCLUDE = __TOP + "INCLUDE.OPENSSL]" +$! +$! Set up the logical name OPENSSL to point at the include directory +$! +$ DEFINE OPENSSL/NOLOG '__INCLUDE' +$! +$! Done +$! +$ RETURN +$! +$ CLEANUP: +$! +$! Restore the logical name OPENSSL if it had a value +$! +$ IF __SAVE_OPENSSL .EQS. "" +$ THEN +$ DEASSIGN OPENSSL +$ ELSE +$ DEFINE/NOLOG OPENSSL '__SAVE_OPENSSL' +$ ENDIF +$! +$! Done +$! +$ RETURN |