aboutsummaryrefslogtreecommitdiff
path: root/openssl/crypto/aes/asm/aesv8-armx.pl
diff options
context:
space:
mode:
Diffstat (limited to 'openssl/crypto/aes/asm/aesv8-armx.pl')
-rwxr-xr-xopenssl/crypto/aes/asm/aesv8-armx.pl962
1 files changed, 962 insertions, 0 deletions
diff --git a/openssl/crypto/aes/asm/aesv8-armx.pl b/openssl/crypto/aes/asm/aesv8-armx.pl
new file mode 100755
index 000000000..1e93f8685
--- /dev/null
+++ b/openssl/crypto/aes/asm/aesv8-armx.pl
@@ -0,0 +1,962 @@
+#!/usr/bin/env perl
+#
+# ====================================================================
+# Written by Andy Polyakov <appro@openssl.org> for the OpenSSL
+# project. The module is, however, dual licensed under OpenSSL and
+# CRYPTOGAMS licenses depending on where you obtain it. For further
+# details see http://www.openssl.org/~appro/cryptogams/.
+# ====================================================================
+#
+# This module implements support for ARMv8 AES instructions. The
+# module is endian-agnostic in sense that it supports both big- and
+# little-endian cases. As does it support both 32- and 64-bit modes
+# of operation. Latter is achieved by limiting amount of utilized
+# registers to 16, which implies additional NEON load and integer
+# instructions. This has no effect on mighty Apple A7, where results
+# are literally equal to the theoretical estimates based on AES
+# instruction latencies and issue rates. On Cortex-A53, an in-order
+# execution core, this costs up to 10-15%, which is partially
+# compensated by implementing dedicated code path for 128-bit
+# CBC encrypt case. On Cortex-A57 parallelizable mode performance
+# seems to be limited by sheer amount of NEON instructions...
+#
+# Performance in cycles per byte processed with 128-bit key:
+#
+# CBC enc CBC dec CTR
+# Apple A7 2.39 1.20 1.20
+# Cortex-A53 2.45 1.87 1.94
+# Cortex-A57 3.64 1.34 1.32
+
+$flavour = shift;
+open STDOUT,">".shift;
+
+$prefix="aes_v8";
+
+$code=<<___;
+#include "arm_arch.h"
+
+#if __ARM_MAX_ARCH__>=7
+.text
+___
+$code.=".arch armv8-a+crypto\n" if ($flavour =~ /64/);
+$code.=".arch armv7-a\n.fpu neon\n.code 32\n" if ($flavour !~ /64/);
+ #^^^^^^ this is done to simplify adoption by not depending
+ # on latest binutils.
+
+# Assembler mnemonics are an eclectic mix of 32- and 64-bit syntax,
+# NEON is mostly 32-bit mnemonics, integer - mostly 64. Goal is to
+# maintain both 32- and 64-bit codes within single module and
+# transliterate common code to either flavour with regex vodoo.
+#
+{{{
+my ($inp,$bits,$out,$ptr,$rounds)=("x0","w1","x2","x3","w12");
+my ($zero,$rcon,$mask,$in0,$in1,$tmp,$key)=
+ $flavour=~/64/? map("q$_",(0..6)) : map("q$_",(0..3,8..10));
+
+
+$code.=<<___;
+.align 5
+rcon:
+.long 0x01,0x01,0x01,0x01
+.long 0x0c0f0e0d,0x0c0f0e0d,0x0c0f0e0d,0x0c0f0e0d // rotate-n-splat
+.long 0x1b,0x1b,0x1b,0x1b
+
+.globl ${prefix}_set_encrypt_key
+.type ${prefix}_set_encrypt_key,%function
+.align 5
+${prefix}_set_encrypt_key:
+.Lenc_key:
+___
+$code.=<<___ if ($flavour =~ /64/);
+ stp x29,x30,[sp,#-16]!
+ add x29,sp,#0
+___
+$code.=<<___;
+ mov $ptr,#-1
+ cmp $inp,#0
+ b.eq .Lenc_key_abort
+ cmp $out,#0
+ b.eq .Lenc_key_abort
+ mov $ptr,#-2
+ cmp $bits,#128
+ b.lt .Lenc_key_abort
+ cmp $bits,#256
+ b.gt .Lenc_key_abort
+ tst $bits,#0x3f
+ b.ne .Lenc_key_abort
+
+ adr $ptr,rcon
+ cmp $bits,#192
+
+ veor $zero,$zero,$zero
+ vld1.8 {$in0},[$inp],#16
+ mov $bits,#8 // reuse $bits
+ vld1.32 {$rcon,$mask},[$ptr],#32
+
+ b.lt .Loop128
+ b.eq .L192
+ b .L256
+
+.align 4
+.Loop128:
+ vtbl.8 $key,{$in0},$mask
+ vext.8 $tmp,$zero,$in0,#12
+ vst1.32 {$in0},[$out],#16
+ aese $key,$zero
+ subs $bits,$bits,#1
+
+ veor $in0,$in0,$tmp
+ vext.8 $tmp,$zero,$tmp,#12
+ veor $in0,$in0,$tmp
+ vext.8 $tmp,$zero,$tmp,#12
+ veor $key,$key,$rcon
+ veor $in0,$in0,$tmp
+ vshl.u8 $rcon,$rcon,#1
+ veor $in0,$in0,$key
+ b.ne .Loop128
+
+ vld1.32 {$rcon},[$ptr]
+
+ vtbl.8 $key,{$in0},$mask
+ vext.8 $tmp,$zero,$in0,#12
+ vst1.32 {$in0},[$out],#16
+ aese $key,$zero
+
+ veor $in0,$in0,$tmp
+ vext.8 $tmp,$zero,$tmp,#12
+ veor $in0,$in0,$tmp
+ vext.8 $tmp,$zero,$tmp,#12
+ veor $key,$key,$rcon
+ veor $in0,$in0,$tmp
+ vshl.u8 $rcon,$rcon,#1
+ veor $in0,$in0,$key
+
+ vtbl.8 $key,{$in0},$mask
+ vext.8 $tmp,$zero,$in0,#12
+ vst1.32 {$in0},[$out],#16
+ aese $key,$zero
+
+ veor $in0,$in0,$tmp
+ vext.8 $tmp,$zero,$tmp,#12
+ veor $in0,$in0,$tmp
+ vext.8 $tmp,$zero,$tmp,#12
+ veor $key,$key,$rcon
+ veor $in0,$in0,$tmp
+ veor $in0,$in0,$key
+ vst1.32 {$in0},[$out]
+ add $out,$out,#0x50
+
+ mov $rounds,#10
+ b .Ldone
+
+.align 4
+.L192:
+ vld1.8 {$in1},[$inp],#8
+ vmov.i8 $key,#8 // borrow $key
+ vst1.32 {$in0},[$out],#16
+ vsub.i8 $mask,$mask,$key // adjust the mask
+
+.Loop192:
+ vtbl.8 $key,{$in1},$mask
+ vext.8 $tmp,$zero,$in0,#12
+ vst1.32 {$in1},[$out],#8
+ aese $key,$zero
+ subs $bits,$bits,#1
+
+ veor $in0,$in0,$tmp
+ vext.8 $tmp,$zero,$tmp,#12
+ veor $in0,$in0,$tmp
+ vext.8 $tmp,$zero,$tmp,#12
+ veor $in0,$in0,$tmp
+
+ vdup.32 $tmp,${in0}[3]
+ veor $tmp,$tmp,$in1
+ veor $key,$key,$rcon
+ vext.8 $in1,$zero,$in1,#12
+ vshl.u8 $rcon,$rcon,#1
+ veor $in1,$in1,$tmp
+ veor $in0,$in0,$key
+ veor $in1,$in1,$key
+ vst1.32 {$in0},[$out],#16
+ b.ne .Loop192
+
+ mov $rounds,#12
+ add $out,$out,#0x20
+ b .Ldone
+
+.align 4
+.L256:
+ vld1.8 {$in1},[$inp]
+ mov $bits,#7
+ mov $rounds,#14
+ vst1.32 {$in0},[$out],#16
+
+.Loop256:
+ vtbl.8 $key,{$in1},$mask
+ vext.8 $tmp,$zero,$in0,#12
+ vst1.32 {$in1},[$out],#16
+ aese $key,$zero
+ subs $bits,$bits,#1
+
+ veor $in0,$in0,$tmp
+ vext.8 $tmp,$zero,$tmp,#12
+ veor $in0,$in0,$tmp
+ vext.8 $tmp,$zero,$tmp,#12
+ veor $key,$key,$rcon
+ veor $in0,$in0,$tmp
+ vshl.u8 $rcon,$rcon,#1
+ veor $in0,$in0,$key
+ vst1.32 {$in0},[$out],#16
+ b.eq .Ldone
+
+ vdup.32 $key,${in0}[3] // just splat
+ vext.8 $tmp,$zero,$in1,#12
+ aese $key,$zero
+
+ veor $in1,$in1,$tmp
+ vext.8 $tmp,$zero,$tmp,#12
+ veor $in1,$in1,$tmp
+ vext.8 $tmp,$zero,$tmp,#12
+ veor $in1,$in1,$tmp
+
+ veor $in1,$in1,$key
+ b .Loop256
+
+.Ldone:
+ str $rounds,[$out]
+ mov $ptr,#0
+
+.Lenc_key_abort:
+ mov x0,$ptr // return value
+ `"ldr x29,[sp],#16" if ($flavour =~ /64/)`
+ ret
+.size ${prefix}_set_encrypt_key,.-${prefix}_set_encrypt_key
+
+.globl ${prefix}_set_decrypt_key
+.type ${prefix}_set_decrypt_key,%function
+.align 5
+${prefix}_set_decrypt_key:
+___
+$code.=<<___ if ($flavour =~ /64/);
+ stp x29,x30,[sp,#-16]!
+ add x29,sp,#0
+___
+$code.=<<___ if ($flavour !~ /64/);
+ stmdb sp!,{r4,lr}
+___
+$code.=<<___;
+ bl .Lenc_key
+
+ cmp x0,#0
+ b.ne .Ldec_key_abort
+
+ sub $out,$out,#240 // restore original $out
+ mov x4,#-16
+ add $inp,$out,x12,lsl#4 // end of key schedule
+
+ vld1.32 {v0.16b},[$out]
+ vld1.32 {v1.16b},[$inp]
+ vst1.32 {v0.16b},[$inp],x4
+ vst1.32 {v1.16b},[$out],#16
+
+.Loop_imc:
+ vld1.32 {v0.16b},[$out]
+ vld1.32 {v1.16b},[$inp]
+ aesimc v0.16b,v0.16b
+ aesimc v1.16b,v1.16b
+ vst1.32 {v0.16b},[$inp],x4
+ vst1.32 {v1.16b},[$out],#16
+ cmp $inp,$out
+ b.hi .Loop_imc
+
+ vld1.32 {v0.16b},[$out]
+ aesimc v0.16b,v0.16b
+ vst1.32 {v0.16b},[$inp]
+
+ eor x0,x0,x0 // return value
+.Ldec_key_abort:
+___
+$code.=<<___ if ($flavour !~ /64/);
+ ldmia sp!,{r4,pc}
+___
+$code.=<<___ if ($flavour =~ /64/);
+ ldp x29,x30,[sp],#16
+ ret
+___
+$code.=<<___;
+.size ${prefix}_set_decrypt_key,.-${prefix}_set_decrypt_key
+___
+}}}
+{{{
+sub gen_block () {
+my $dir = shift;
+my ($e,$mc) = $dir eq "en" ? ("e","mc") : ("d","imc");
+my ($inp,$out,$key)=map("x$_",(0..2));
+my $rounds="w3";
+my ($rndkey0,$rndkey1,$inout)=map("q$_",(0..3));
+
+$code.=<<___;
+.globl ${prefix}_${dir}crypt
+.type ${prefix}_${dir}crypt,%function
+.align 5
+${prefix}_${dir}crypt:
+ ldr $rounds,[$key,#240]
+ vld1.32 {$rndkey0},[$key],#16
+ vld1.8 {$inout},[$inp]
+ sub $rounds,$rounds,#2
+ vld1.32 {$rndkey1},[$key],#16
+
+.Loop_${dir}c:
+ aes$e $inout,$rndkey0
+ vld1.32 {$rndkey0},[$key],#16
+ aes$mc $inout,$inout
+ subs $rounds,$rounds,#2
+ aes$e $inout,$rndkey1
+ vld1.32 {$rndkey1},[$key],#16
+ aes$mc $inout,$inout
+ b.gt .Loop_${dir}c
+
+ aes$e $inout,$rndkey0
+ vld1.32 {$rndkey0},[$key]
+ aes$mc $inout,$inout
+ aes$e $inout,$rndkey1
+ veor $inout,$inout,$rndkey0
+
+ vst1.8 {$inout},[$out]
+ ret
+.size ${prefix}_${dir}crypt,.-${prefix}_${dir}crypt
+___
+}
+&gen_block("en");
+&gen_block("de");
+}}}
+{{{
+my ($inp,$out,$len,$key,$ivp)=map("x$_",(0..4)); my $enc="w5";
+my ($rounds,$cnt,$key_,$step,$step1)=($enc,"w6","x7","x8","x12");
+my ($dat0,$dat1,$in0,$in1,$tmp0,$tmp1,$ivec,$rndlast)=map("q$_",(0..7));
+
+my ($dat,$tmp,$rndzero_n_last)=($dat0,$tmp0,$tmp1);
+
+### q8-q15 preloaded key schedule
+
+$code.=<<___;
+.globl ${prefix}_cbc_encrypt
+.type ${prefix}_cbc_encrypt,%function
+.align 5
+${prefix}_cbc_encrypt:
+___
+$code.=<<___ if ($flavour =~ /64/);
+ stp x29,x30,[sp,#-16]!
+ add x29,sp,#0
+___
+$code.=<<___ if ($flavour !~ /64/);
+ mov ip,sp
+ stmdb sp!,{r4-r8,lr}
+ vstmdb sp!,{d8-d15} @ ABI specification says so
+ ldmia ip,{r4-r5} @ load remaining args
+___
+$code.=<<___;
+ subs $len,$len,#16
+ mov $step,#16
+ b.lo .Lcbc_abort
+ cclr $step,eq
+
+ cmp $enc,#0 // en- or decrypting?
+ ldr $rounds,[$key,#240]
+ and $len,$len,#-16
+ vld1.8 {$ivec},[$ivp]
+ vld1.8 {$dat},[$inp],$step
+
+ vld1.32 {q8-q9},[$key] // load key schedule...
+ sub $rounds,$rounds,#6
+ add $key_,$key,x5,lsl#4 // pointer to last 7 round keys
+ sub $rounds,$rounds,#2
+ vld1.32 {q10-q11},[$key_],#32
+ vld1.32 {q12-q13},[$key_],#32
+ vld1.32 {q14-q15},[$key_],#32
+ vld1.32 {$rndlast},[$key_]
+
+ add $key_,$key,#32
+ mov $cnt,$rounds
+ b.eq .Lcbc_dec
+
+ cmp $rounds,#2
+ veor $dat,$dat,$ivec
+ veor $rndzero_n_last,q8,$rndlast
+ b.eq .Lcbc_enc128
+
+.Loop_cbc_enc:
+ aese $dat,q8
+ vld1.32 {q8},[$key_],#16
+ aesmc $dat,$dat
+ subs $cnt,$cnt,#2
+ aese $dat,q9
+ vld1.32 {q9},[$key_],#16
+ aesmc $dat,$dat
+ b.gt .Loop_cbc_enc
+
+ aese $dat,q8
+ aesmc $dat,$dat
+ subs $len,$len,#16
+ aese $dat,q9
+ aesmc $dat,$dat
+ cclr $step,eq
+ aese $dat,q10
+ aesmc $dat,$dat
+ add $key_,$key,#16
+ aese $dat,q11
+ aesmc $dat,$dat
+ vld1.8 {q8},[$inp],$step
+ aese $dat,q12
+ aesmc $dat,$dat
+ veor q8,q8,$rndzero_n_last
+ aese $dat,q13
+ aesmc $dat,$dat
+ vld1.32 {q9},[$key_],#16 // re-pre-load rndkey[1]
+ aese $dat,q14
+ aesmc $dat,$dat
+ aese $dat,q15
+
+ mov $cnt,$rounds
+ veor $ivec,$dat,$rndlast
+ vst1.8 {$ivec},[$out],#16
+ b.hs .Loop_cbc_enc
+
+ b .Lcbc_done
+
+.align 5
+.Lcbc_enc128:
+ vld1.32 {$in0-$in1},[$key_]
+ aese $dat,q8
+ aesmc $dat,$dat
+ b .Lenter_cbc_enc128
+.Loop_cbc_enc128:
+ aese $dat,q8
+ aesmc $dat,$dat
+ vst1.8 {$ivec},[$out],#16
+.Lenter_cbc_enc128:
+ aese $dat,q9
+ aesmc $dat,$dat
+ subs $len,$len,#16
+ aese $dat,$in0
+ aesmc $dat,$dat
+ cclr $step,eq
+ aese $dat,$in1
+ aesmc $dat,$dat
+ aese $dat,q10
+ aesmc $dat,$dat
+ aese $dat,q11
+ aesmc $dat,$dat
+ vld1.8 {q8},[$inp],$step
+ aese $dat,q12
+ aesmc $dat,$dat
+ aese $dat,q13
+ aesmc $dat,$dat
+ aese $dat,q14
+ aesmc $dat,$dat
+ veor q8,q8,$rndzero_n_last
+ aese $dat,q15
+ veor $ivec,$dat,$rndlast
+ b.hs .Loop_cbc_enc128
+
+ vst1.8 {$ivec},[$out],#16
+ b .Lcbc_done
+___
+{
+my ($dat2,$in2,$tmp2)=map("q$_",(10,11,9));
+$code.=<<___;
+.align 5
+.Lcbc_dec:
+ vld1.8 {$dat2},[$inp],#16
+ subs $len,$len,#32 // bias
+ add $cnt,$rounds,#2
+ vorr $in1,$dat,$dat
+ vorr $dat1,$dat,$dat
+ vorr $in2,$dat2,$dat2
+ b.lo .Lcbc_dec_tail
+
+ vorr $dat1,$dat2,$dat2
+ vld1.8 {$dat2},[$inp],#16
+ vorr $in0,$dat,$dat
+ vorr $in1,$dat1,$dat1
+ vorr $in2,$dat2,$dat2
+
+.Loop3x_cbc_dec:
+ aesd $dat0,q8
+ aesd $dat1,q8
+ aesd $dat2,q8
+ vld1.32 {q8},[$key_],#16
+ aesimc $dat0,$dat0
+ aesimc $dat1,$dat1
+ aesimc $dat2,$dat2
+ subs $cnt,$cnt,#2
+ aesd $dat0,q9
+ aesd $dat1,q9
+ aesd $dat2,q9
+ vld1.32 {q9},[$key_],#16
+ aesimc $dat0,$dat0
+ aesimc $dat1,$dat1
+ aesimc $dat2,$dat2
+ b.gt .Loop3x_cbc_dec
+
+ aesd $dat0,q8
+ aesd $dat1,q8
+ aesd $dat2,q8
+ veor $tmp0,$ivec,$rndlast
+ aesimc $dat0,$dat0
+ aesimc $dat1,$dat1
+ aesimc $dat2,$dat2
+ veor $tmp1,$in0,$rndlast
+ aesd $dat0,q9
+ aesd $dat1,q9
+ aesd $dat2,q9
+ veor $tmp2,$in1,$rndlast
+ subs $len,$len,#0x30
+ aesimc $dat0,$dat0
+ aesimc $dat1,$dat1
+ aesimc $dat2,$dat2
+ vorr $ivec,$in2,$in2
+ mov.lo x6,$len // x6, $cnt, is zero at this point
+ aesd $dat0,q12
+ aesd $dat1,q12
+ aesd $dat2,q12
+ add $inp,$inp,x6 // $inp is adjusted in such way that
+ // at exit from the loop $dat1-$dat2
+ // are loaded with last "words"
+ aesimc $dat0,$dat0
+ aesimc $dat1,$dat1
+ aesimc $dat2,$dat2
+ mov $key_,$key
+ aesd $dat0,q13
+ aesd $dat1,q13
+ aesd $dat2,q13
+ vld1.8 {$in0},[$inp],#16
+ aesimc $dat0,$dat0
+ aesimc $dat1,$dat1
+ aesimc $dat2,$dat2
+ vld1.8 {$in1},[$inp],#16
+ aesd $dat0,q14
+ aesd $dat1,q14
+ aesd $dat2,q14
+ vld1.8 {$in2},[$inp],#16
+ aesimc $dat0,$dat0
+ aesimc $dat1,$dat1
+ aesimc $dat2,$dat2
+ vld1.32 {q8},[$key_],#16 // re-pre-load rndkey[0]
+ aesd $dat0,q15
+ aesd $dat1,q15
+ aesd $dat2,q15
+
+ add $cnt,$rounds,#2
+ veor $tmp0,$tmp0,$dat0
+ veor $tmp1,$tmp1,$dat1
+ veor $dat2,$dat2,$tmp2
+ vld1.32 {q9},[$key_],#16 // re-pre-load rndkey[1]
+ vorr $dat0,$in0,$in0
+ vst1.8 {$tmp0},[$out],#16
+ vorr $dat1,$in1,$in1
+ vst1.8 {$tmp1},[$out],#16
+ vst1.8 {$dat2},[$out],#16
+ vorr $dat2,$in2,$in2
+ b.hs .Loop3x_cbc_dec
+
+ cmn $len,#0x30
+ b.eq .Lcbc_done
+ nop
+
+.Lcbc_dec_tail:
+ aesd $dat1,q8
+ aesd $dat2,q8
+ vld1.32 {q8},[$key_],#16
+ aesimc $dat1,$dat1
+ aesimc $dat2,$dat2
+ subs $cnt,$cnt,#2
+ aesd $dat1,q9
+ aesd $dat2,q9
+ vld1.32 {q9},[$key_],#16
+ aesimc $dat1,$dat1
+ aesimc $dat2,$dat2
+ b.gt .Lcbc_dec_tail
+
+ aesd $dat1,q8
+ aesd $dat2,q8
+ aesimc $dat1,$dat1
+ aesimc $dat2,$dat2
+ aesd $dat1,q9
+ aesd $dat2,q9
+ aesimc $dat1,$dat1
+ aesimc $dat2,$dat2
+ aesd $dat1,q12
+ aesd $dat2,q12
+ aesimc $dat1,$dat1
+ aesimc $dat2,$dat2
+ cmn $len,#0x20
+ aesd $dat1,q13
+ aesd $dat2,q13
+ aesimc $dat1,$dat1
+ aesimc $dat2,$dat2
+ veor $tmp1,$ivec,$rndlast
+ aesd $dat1,q14
+ aesd $dat2,q14
+ aesimc $dat1,$dat1
+ aesimc $dat2,$dat2
+ veor $tmp2,$in1,$rndlast
+ aesd $dat1,q15
+ aesd $dat2,q15
+ b.eq .Lcbc_dec_one
+ veor $tmp1,$tmp1,$dat1
+ veor $tmp2,$tmp2,$dat2
+ vorr $ivec,$in2,$in2
+ vst1.8 {$tmp1},[$out],#16
+ vst1.8 {$tmp2},[$out],#16
+ b .Lcbc_done
+
+.Lcbc_dec_one:
+ veor $tmp1,$tmp1,$dat2
+ vorr $ivec,$in2,$in2
+ vst1.8 {$tmp1},[$out],#16
+
+.Lcbc_done:
+ vst1.8 {$ivec},[$ivp]
+.Lcbc_abort:
+___
+}
+$code.=<<___ if ($flavour !~ /64/);
+ vldmia sp!,{d8-d15}
+ ldmia sp!,{r4-r8,pc}
+___
+$code.=<<___ if ($flavour =~ /64/);
+ ldr x29,[sp],#16
+ ret
+___
+$code.=<<___;
+.size ${prefix}_cbc_encrypt,.-${prefix}_cbc_encrypt
+___
+}}}
+{{{
+my ($inp,$out,$len,$key,$ivp)=map("x$_",(0..4));
+my ($rounds,$cnt,$key_)=("w5","w6","x7");
+my ($ctr,$tctr0,$tctr1,$tctr2)=map("w$_",(8..10,12));
+my $step="x12"; # aliases with $tctr2
+
+my ($dat0,$dat1,$in0,$in1,$tmp0,$tmp1,$ivec,$rndlast)=map("q$_",(0..7));
+my ($dat2,$in2,$tmp2)=map("q$_",(10,11,9));
+
+my ($dat,$tmp)=($dat0,$tmp0);
+
+### q8-q15 preloaded key schedule
+
+$code.=<<___;
+.globl ${prefix}_ctr32_encrypt_blocks
+.type ${prefix}_ctr32_encrypt_blocks,%function
+.align 5
+${prefix}_ctr32_encrypt_blocks:
+___
+$code.=<<___ if ($flavour =~ /64/);
+ stp x29,x30,[sp,#-16]!
+ add x29,sp,#0
+___
+$code.=<<___ if ($flavour !~ /64/);
+ mov ip,sp
+ stmdb sp!,{r4-r10,lr}
+ vstmdb sp!,{d8-d15} @ ABI specification says so
+ ldr r4, [ip] @ load remaining arg
+___
+$code.=<<___;
+ ldr $rounds,[$key,#240]
+
+ ldr $ctr, [$ivp, #12]
+ vld1.32 {$dat0},[$ivp]
+
+ vld1.32 {q8-q9},[$key] // load key schedule...
+ sub $rounds,$rounds,#4
+ mov $step,#16
+ cmp $len,#2
+ add $key_,$key,x5,lsl#4 // pointer to last 5 round keys
+ sub $rounds,$rounds,#2
+ vld1.32 {q12-q13},[$key_],#32
+ vld1.32 {q14-q15},[$key_],#32
+ vld1.32 {$rndlast},[$key_]
+ add $key_,$key,#32
+ mov $cnt,$rounds
+ cclr $step,lo
+#ifndef __ARMEB__
+ rev $ctr, $ctr
+#endif
+ vorr $dat1,$dat0,$dat0
+ add $tctr1, $ctr, #1
+ vorr $dat2,$dat0,$dat0
+ add $ctr, $ctr, #2
+ vorr $ivec,$dat0,$dat0
+ rev $tctr1, $tctr1
+ vmov.32 ${dat1}[3],$tctr1
+ b.ls .Lctr32_tail
+ rev $tctr2, $ctr
+ sub $len,$len,#3 // bias
+ vmov.32 ${dat2}[3],$tctr2
+ b .Loop3x_ctr32
+
+.align 4
+.Loop3x_ctr32:
+ aese $dat0,q8
+ aese $dat1,q8
+ aese $dat2,q8
+ vld1.32 {q8},[$key_],#16
+ aesmc $dat0,$dat0
+ aesmc $dat1,$dat1
+ aesmc $dat2,$dat2
+ subs $cnt,$cnt,#2
+ aese $dat0,q9
+ aese $dat1,q9
+ aese $dat2,q9
+ vld1.32 {q9},[$key_],#16
+ aesmc $dat0,$dat0
+ aesmc $dat1,$dat1
+ aesmc $dat2,$dat2
+ b.gt .Loop3x_ctr32
+
+ aese $dat0,q8
+ aese $dat1,q8
+ aese $dat2,q8
+ mov $key_,$key
+ aesmc $tmp0,$dat0
+ vld1.8 {$in0},[$inp],#16
+ aesmc $tmp1,$dat1
+ aesmc $dat2,$dat2
+ vorr $dat0,$ivec,$ivec
+ aese $tmp0,q9
+ vld1.8 {$in1},[$inp],#16
+ aese $tmp1,q9
+ aese $dat2,q9
+ vorr $dat1,$ivec,$ivec
+ aesmc $tmp0,$tmp0
+ vld1.8 {$in2},[$inp],#16
+ aesmc $tmp1,$tmp1
+ aesmc $tmp2,$dat2
+ vorr $dat2,$ivec,$ivec
+ add $tctr0,$ctr,#1
+ aese $tmp0,q12
+ aese $tmp1,q12
+ aese $tmp2,q12
+ veor $in0,$in0,$rndlast
+ add $tctr1,$ctr,#2
+ aesmc $tmp0,$tmp0
+ aesmc $tmp1,$tmp1
+ aesmc $tmp2,$tmp2
+ veor $in1,$in1,$rndlast
+ add $ctr,$ctr,#3
+ aese $tmp0,q13
+ aese $tmp1,q13
+ aese $tmp2,q13
+ veor $in2,$in2,$rndlast
+ rev $tctr0,$tctr0
+ aesmc $tmp0,$tmp0
+ vld1.32 {q8},[$key_],#16 // re-pre-load rndkey[0]
+ aesmc $tmp1,$tmp1
+ aesmc $tmp2,$tmp2
+ vmov.32 ${dat0}[3], $tctr0
+ rev $tctr1,$tctr1
+ aese $tmp0,q14
+ aese $tmp1,q14
+ aese $tmp2,q14
+ vmov.32 ${dat1}[3], $tctr1
+ rev $tctr2,$ctr
+ aesmc $tmp0,$tmp0
+ aesmc $tmp1,$tmp1
+ aesmc $tmp2,$tmp2
+ vmov.32 ${dat2}[3], $tctr2
+ subs $len,$len,#3
+ aese $tmp0,q15
+ aese $tmp1,q15
+ aese $tmp2,q15
+
+ mov $cnt,$rounds
+ veor $in0,$in0,$tmp0
+ veor $in1,$in1,$tmp1
+ veor $in2,$in2,$tmp2
+ vld1.32 {q9},[$key_],#16 // re-pre-load rndkey[1]
+ vst1.8 {$in0},[$out],#16
+ vst1.8 {$in1},[$out],#16
+ vst1.8 {$in2},[$out],#16
+ b.hs .Loop3x_ctr32
+
+ adds $len,$len,#3
+ b.eq .Lctr32_done
+ cmp $len,#1
+ mov $step,#16
+ cclr $step,eq
+
+.Lctr32_tail:
+ aese $dat0,q8
+ aese $dat1,q8
+ vld1.32 {q8},[$key_],#16
+ aesmc $dat0,$dat0
+ aesmc $dat1,$dat1
+ subs $cnt,$cnt,#2
+ aese $dat0,q9
+ aese $dat1,q9
+ vld1.32 {q9},[$key_],#16
+ aesmc $dat0,$dat0
+ aesmc $dat1,$dat1
+ b.gt .Lctr32_tail
+
+ aese $dat0,q8
+ aese $dat1,q8
+ aesmc $dat0,$dat0
+ aesmc $dat1,$dat1
+ aese $dat0,q9
+ aese $dat1,q9
+ aesmc $dat0,$dat0
+ aesmc $dat1,$dat1
+ vld1.8 {$in0},[$inp],$step
+ aese $dat0,q12
+ aese $dat1,q12
+ vld1.8 {$in1},[$inp]
+ aesmc $dat0,$dat0
+ aesmc $dat1,$dat1
+ aese $dat0,q13
+ aese $dat1,q13
+ aesmc $dat0,$dat0
+ aesmc $dat1,$dat1
+ aese $dat0,q14
+ aese $dat1,q14
+ veor $in0,$in0,$rndlast
+ aesmc $dat0,$dat0
+ aesmc $dat1,$dat1
+ veor $in1,$in1,$rndlast
+ aese $dat0,q15
+ aese $dat1,q15
+
+ cmp $len,#1
+ veor $in0,$in0,$dat0
+ veor $in1,$in1,$dat1
+ vst1.8 {$in0},[$out],#16
+ b.eq .Lctr32_done
+ vst1.8 {$in1},[$out]
+
+.Lctr32_done:
+___
+$code.=<<___ if ($flavour !~ /64/);
+ vldmia sp!,{d8-d15}
+ ldmia sp!,{r4-r10,pc}
+___
+$code.=<<___ if ($flavour =~ /64/);
+ ldr x29,[sp],#16
+ ret
+___
+$code.=<<___;
+.size ${prefix}_ctr32_encrypt_blocks,.-${prefix}_ctr32_encrypt_blocks
+___
+}}}
+$code.=<<___;
+#endif
+___
+########################################
+if ($flavour =~ /64/) { ######## 64-bit code
+ my %opcode = (
+ "aesd" => 0x4e285800, "aese" => 0x4e284800,
+ "aesimc"=> 0x4e287800, "aesmc" => 0x4e286800 );
+
+ local *unaes = sub {
+ my ($mnemonic,$arg)=@_;
+
+ $arg =~ m/[qv]([0-9]+)[^,]*,\s*[qv]([0-9]+)/o &&
+ sprintf ".inst\t0x%08x\t//%s %s",
+ $opcode{$mnemonic}|$1|($2<<5),
+ $mnemonic,$arg;
+ };
+
+ foreach(split("\n",$code)) {
+ s/\`([^\`]*)\`/eval($1)/geo;
+
+ s/\bq([0-9]+)\b/"v".($1<8?$1:$1+8).".16b"/geo; # old->new registers
+ s/@\s/\/\//o; # old->new style commentary
+
+ #s/[v]?(aes\w+)\s+([qv].*)/unaes($1,$2)/geo or
+ s/cclr\s+([wx])([^,]+),\s*([a-z]+)/csel $1$2,$1zr,$1$2,$3/o or
+ s/mov\.([a-z]+)\s+([wx][0-9]+),\s*([wx][0-9]+)/csel $2,$3,$2,$1/o or
+ s/vmov\.i8/movi/o or # fix up legacy mnemonics
+ s/vext\.8/ext/o or
+ s/vrev32\.8/rev32/o or
+ s/vtst\.8/cmtst/o or
+ s/vshr/ushr/o or
+ s/^(\s+)v/$1/o or # strip off v prefix
+ s/\bbx\s+lr\b/ret/o;
+
+ # fix up remainig legacy suffixes
+ s/\.[ui]?8//o;
+ m/\],#8/o and s/\.16b/\.8b/go;
+ s/\.[ui]?32//o and s/\.16b/\.4s/go;
+ s/\.[ui]?64//o and s/\.16b/\.2d/go;
+ s/\.[42]([sd])\[([0-3])\]/\.$1\[$2\]/o;
+
+ print $_,"\n";
+ }
+} else { ######## 32-bit code
+ my %opcode = (
+ "aesd" => 0xf3b00340, "aese" => 0xf3b00300,
+ "aesimc"=> 0xf3b003c0, "aesmc" => 0xf3b00380 );
+
+ local *unaes = sub {
+ my ($mnemonic,$arg)=@_;
+
+ if ($arg =~ m/[qv]([0-9]+)[^,]*,\s*[qv]([0-9]+)/o) {
+ my $word = $opcode{$mnemonic}|(($1&7)<<13)|(($1&8)<<19)
+ |(($2&7)<<1) |(($2&8)<<2);
+ # since ARMv7 instructions are always encoded little-endian.
+ # correct solution is to use .inst directive, but older
+ # assemblers don't implement it:-(
+ sprintf ".byte\t0x%02x,0x%02x,0x%02x,0x%02x\t@ %s %s",
+ $word&0xff,($word>>8)&0xff,
+ ($word>>16)&0xff,($word>>24)&0xff,
+ $mnemonic,$arg;
+ }
+ };
+
+ sub unvtbl {
+ my $arg=shift;
+
+ $arg =~ m/q([0-9]+),\s*\{q([0-9]+)\},\s*q([0-9]+)/o &&
+ sprintf "vtbl.8 d%d,{q%d},d%d\n\t".
+ "vtbl.8 d%d,{q%d},d%d", 2*$1,$2,2*$3, 2*$1+1,$2,2*$3+1;
+ }
+
+ sub unvdup32 {
+ my $arg=shift;
+
+ $arg =~ m/q([0-9]+),\s*q([0-9]+)\[([0-3])\]/o &&
+ sprintf "vdup.32 q%d,d%d[%d]",$1,2*$2+($3>>1),$3&1;
+ }
+
+ sub unvmov32 {
+ my $arg=shift;
+
+ $arg =~ m/q([0-9]+)\[([0-3])\],(.*)/o &&
+ sprintf "vmov.32 d%d[%d],%s",2*$1+($2>>1),$2&1,$3;
+ }
+
+ foreach(split("\n",$code)) {
+ s/\`([^\`]*)\`/eval($1)/geo;
+
+ s/\b[wx]([0-9]+)\b/r$1/go; # new->old registers
+ s/\bv([0-9])\.[12468]+[bsd]\b/q$1/go; # new->old registers
+ s/\/\/\s?/@ /o; # new->old style commentary
+
+ # fix up remainig new-style suffixes
+ s/\{q([0-9]+)\},\s*\[(.+)\],#8/sprintf "{d%d},[$2]!",2*$1/eo or
+ s/\],#[0-9]+/]!/o;
+
+ s/[v]?(aes\w+)\s+([qv].*)/unaes($1,$2)/geo or
+ s/cclr\s+([^,]+),\s*([a-z]+)/mov$2 $1,#0/o or
+ s/vtbl\.8\s+(.*)/unvtbl($1)/geo or
+ s/vdup\.32\s+(.*)/unvdup32($1)/geo or
+ s/vmov\.32\s+(.*)/unvmov32($1)/geo or
+ s/^(\s+)b\./$1b/o or
+ s/^(\s+)mov\./$1mov/o or
+ s/^(\s+)ret/$1bx\tlr/o;
+
+ print $_,"\n";
+ }
+}
+
+close STDOUT;