1 files changed, 323 insertions, 0 deletions
diff --git a/openssl/crypto/bn/asm/ppc-mont.pl b/openssl/crypto/bn/asm/ppc-mont.pl
new file mode 100644
index 000000000..7849eae95
--- /dev/null
+++ b/openssl/crypto/bn/asm/ppc-mont.pl
@@ -0,0 +1,323 @@
+#!/usr/bin/env perl
+
+# ====================================================================
+# Written by Andy Polyakov <appro@fy.chalmers.se> for the OpenSSL
+# project. The module is, however, dual licensed under OpenSSL and
+# CRYPTOGAMS licenses depending on where you obtain it. For further
+# details see http://www.openssl.org/~appro/cryptogams/.
+# ====================================================================
+
+# April 2006
+
+# "Teaser" Montgomery multiplication module for PowerPC. It's possible
+# to gain a bit more by modulo-scheduling outer loop, then dedicated
+# squaring procedure should give further 20% and code can be adapted
+# for 32-bit application running on 64-bit CPU. As for the latter.
+# It won't be able to achieve "native" 64-bit performance, because in
+# 32-bit application context every addc instruction will have to be
+# expanded as addc, twice right shift by 32 and finally adde, etc.
+# So far RSA *sign* performance improvement over pre-bn_mul_mont asm
+# for 64-bit application running on PPC970/G5 is:
+#
+# 512-bit	+65%	
+# 1024-bit	+35%
+# 2048-bit	+18%
+# 4096-bit	+4%
+
+$flavour = shift;
+
+if ($flavour =~ /32/) {
+	$BITS=	32;
+	$BNSZ=	$BITS/8;
+	$SIZE_T=4;
+	$RZONE=	224;
+	$FRAME=	$SIZE_T*16;
+
+	$LD=	"lwz";		# load
+	$LDU=	"lwzu";		# load and update
+	$LDX=	"lwzx";		# load indexed
+	$ST=	"stw";		# store
+	$STU=	"stwu";		# store and update
+	$STX=	"stwx";		# store indexed
+	$STUX=	"stwux";	# store indexed and update
+	$UMULL=	"mullw";	# unsigned multiply low
+	$UMULH=	"mulhwu";	# unsigned multiply high
+	$UCMP=	"cmplw";	# unsigned compare
+	$SHRI=	"srwi";		# unsigned shift right by immediate	
+	$PUSH=	$ST;
+	$POP=	$LD;
+} elsif ($flavour =~ /64/) {
+	$BITS=	64;
+	$BNSZ=	$BITS/8;
+	$SIZE_T=8;
+	$RZONE=	288;
+	$FRAME=	$SIZE_T*16;
+
+	# same as above, but 64-bit mnemonics...
+	$LD=	"ld";		# load
+	$LDU=	"ldu";		# load and update
+	$LDX=	"ldx";		# load indexed
+	$ST=	"std";		# store
+	$STU=	"stdu";		# store and update
+	$STX=	"stdx";		# store indexed
+	$STUX=	"stdux";	# store indexed and update
+	$UMULL=	"mulld";	# unsigned multiply low
+	$UMULH=	"mulhdu";	# unsigned multiply high
+	$UCMP=	"cmpld";	# unsigned compare
+	$SHRI=	"srdi";		# unsigned shift right by immediate	
+	$PUSH=	$ST;
+	$POP=	$LD;
+} else { die "nonsense $flavour"; }
+
+$0 =~ m/(.*[\/\\])[^\/\\]+$/; $dir=$1;
+( $xlate="${dir}ppc-xlate.pl" and -f $xlate ) or
+( $xlate="${dir}../../perlasm/ppc-xlate.pl" and -f $xlate) or
+die "can't locate ppc-xlate.pl";
+
+open STDOUT,"| $^X $xlate $flavour ".shift || die "can't call $xlate: $!";
+
+$sp="r1";
+$toc="r2";
+$rp="r3";	$ovf="r3";
+$ap="r4";
+$bp="r5";
+$np="r6";
+$n0="r7";
+$num="r8";
+$rp="r9";	# $rp is reassigned
+$aj="r10";
+$nj="r11";
+$tj="r12";
+# non-volatile registers
+$i="r14";
+$j="r15";
+$tp="r16";
+$m0="r17";
+$m1="r18";
+$lo0="r19";
+$hi0="r20";
+$lo1="r21";
+$hi1="r22";
+$alo="r23";
+$ahi="r24";
+$nlo="r25";
+#
+$nhi="r0";
+
+$code=<<___;
+.machine "any"
+.text
+
+.globl	.bn_mul_mont
+.align	4
+.bn_mul_mont:
+	cmpwi	$num,4
+	mr	$rp,r3		; $rp is reassigned
+	li	r3,0
+	bltlr
+
+	slwi	$num,$num,`log($BNSZ)/log(2)`
+	li	$tj,-4096
+	addi	$ovf,$num,`$FRAME+$RZONE`
+	subf	$ovf,$ovf,$sp	; $sp-$ovf
+	and	$ovf,$ovf,$tj	; minimize TLB usage
+	subf	$ovf,$sp,$ovf	; $ovf-$sp
+	srwi	$num,$num,`log($BNSZ)/log(2)`
+	$STUX	$sp,$sp,$ovf
+
+	$PUSH	r14,`4*$SIZE_T`($sp)
+	$PUSH	r15,`5*$SIZE_T`($sp)
+	$PUSH	r16,`6*$SIZE_T`($sp)
+	$PUSH	r17,`7*$SIZE_T`($sp)
+	$PUSH	r18,`8*$SIZE_T`($sp)
+	$PUSH	r19,`9*$SIZE_T`($sp)
+	$PUSH	r20,`10*$SIZE_T`($sp)
+	$PUSH	r21,`11*$SIZE_T`($sp)
+	$PUSH	r22,`12*$SIZE_T`($sp)
+	$PUSH	r23,`13*$SIZE_T`($sp)
+	$PUSH	r24,`14*$SIZE_T`($sp)
+	$PUSH	r25,`15*$SIZE_T`($sp)
+
+	$LD	$n0,0($n0)	; pull n0[0] value
+	addi	$num,$num,-2	; adjust $num for counter register
+
+	$LD	$m0,0($bp)	; m0=bp[0]
+	$LD	$aj,0($ap)	; ap[0]
+	addi	$tp,$sp,$FRAME
+	$UMULL	$lo0,$aj,$m0	; ap[0]*bp[0]
+	$UMULH	$hi0,$aj,$m0
+
+	$LD	$aj,$BNSZ($ap)	; ap[1]
+	$LD	$nj,0($np)	; np[0]
+
+	$UMULL	$m1,$lo0,$n0	; "tp[0]"*n0
+
+	$UMULL	$alo,$aj,$m0	; ap[1]*bp[0]
+	$UMULH	$ahi,$aj,$m0
+
+	$UMULL	$lo1,$nj,$m1	; np[0]*m1
+	$UMULH	$hi1,$nj,$m1
+	$LD	$nj,$BNSZ($np)	; np[1]
+	addc	$lo1,$lo1,$lo0
+	addze	$hi1,$hi1
+
+	$UMULL	$nlo,$nj,$m1	; np[1]*m1
+	$UMULH	$nhi,$nj,$m1
+
+	mtctr	$num
+	li	$j,`2*$BNSZ`
+.align	4
+L1st:
+	$LDX	$aj,$ap,$j	; ap[j]
+	addc	$lo0,$alo,$hi0
+	$LDX	$nj,$np,$j	; np[j]
+	addze	$hi0,$ahi
+	$UMULL	$alo,$aj,$m0	; ap[j]*bp[0]
+	addc	$lo1,$nlo,$hi1
+	$UMULH	$ahi,$aj,$m0
+	addze	$hi1,$nhi
+	$UMULL	$nlo,$nj,$m1	; np[j]*m1
+	addc	$lo1,$lo1,$lo0	; np[j]*m1+ap[j]*bp[0]
+	$UMULH	$nhi,$nj,$m1
+	addze	$hi1,$hi1
+	$ST	$lo1,0($tp)	; tp[j-1]
+
+	addi	$j,$j,$BNSZ	; j++
+	addi	$tp,$tp,$BNSZ	; tp++
+	bdnz-	L1st
+;L1st
+	addc	$lo0,$alo,$hi0
+	addze	$hi0,$ahi
+
+	addc	$lo1,$nlo,$hi1
+	addze	$hi1,$nhi
+	addc	$lo1,$lo1,$lo0	; np[j]*m1+ap[j]*bp[0]
+	addze	$hi1,$hi1
+	$ST	$lo1,0($tp)	; tp[j-1]
+
+	li	$ovf,0
+	addc	$hi1,$hi1,$hi0
+	addze	$ovf,$ovf	; upmost overflow bit
+	$ST	$hi1,$BNSZ($tp)
+
+	li	$i,$BNSZ
+.align	4
+Louter:
+	$LDX	$m0,$bp,$i	; m0=bp[i]
+	$LD	$aj,0($ap)	; ap[0]
+	addi	$tp,$sp,$FRAME
+	$LD	$tj,$FRAME($sp)	; tp[0]
+	$UMULL	$lo0,$aj,$m0	; ap[0]*bp[i]
+	$UMULH	$hi0,$aj,$m0
+	$LD	$aj,$BNSZ($ap)	; ap[1]
+	$LD	$nj,0($np)	; np[0]
+	addc	$lo0,$lo0,$tj	; ap[0]*bp[i]+tp[0]
+	$UMULL	$alo,$aj,$m0	; ap[j]*bp[i]
+	addze	$hi0,$hi0
+	$UMULL	$m1,$lo0,$n0	; tp[0]*n0
+	$UMULH	$ahi,$aj,$m0
+	$UMULL	$lo1,$nj,$m1	; np[0]*m1
+	$UMULH	$hi1,$nj,$m1
+	$LD	$nj,$BNSZ($np)	; np[1]
+	addc	$lo1,$lo1,$lo0
+	$UMULL	$nlo,$nj,$m1	; np[1]*m1
+	addze	$hi1,$hi1
+	$UMULH	$nhi,$nj,$m1
+
+	mtctr	$num
+	li	$j,`2*$BNSZ`
+.align	4
+Linner:
+	$LDX	$aj,$ap,$j	; ap[j]
+	addc	$lo0,$alo,$hi0
+	$LD	$tj,$BNSZ($tp)	; tp[j]
+	addze	$hi0,$ahi
+	$LDX	$nj,$np,$j	; np[j]
+	addc	$lo1,$nlo,$hi1
+	$UMULL	$alo,$aj,$m0	; ap[j]*bp[i]
+	addze	$hi1,$nhi
+	$UMULH	$ahi,$aj,$m0
+	addc	$lo0,$lo0,$tj	; ap[j]*bp[i]+tp[j]
+	$UMULL	$nlo,$nj,$m1	; np[j]*m1
+	addze	$hi0,$hi0
+	$UMULH	$nhi,$nj,$m1
+	addc	$lo1,$lo1,$lo0	; np[j]*m1+ap[j]*bp[i]+tp[j]
+	addi	$j,$j,$BNSZ	; j++
+	addze	$hi1,$hi1
+	$ST	$lo1,0($tp)	; tp[j-1]
+	addi	$tp,$tp,$BNSZ	; tp++
+	bdnz-	Linner
+;Linner
+	$LD	$tj,$BNSZ($tp)	; tp[j]
+	addc	$lo0,$alo,$hi0
+	addze	$hi0,$ahi
+	addc	$lo0,$lo0,$tj	; ap[j]*bp[i]+tp[j]
+	addze	$hi0,$hi0
+
+	addc	$lo1,$nlo,$hi1
+	addze	$hi1,$nhi
+	addc	$lo1,$lo1,$lo0	; np[j]*m1+ap[j]*bp[i]+tp[j]
+	addze	$hi1,$hi1
+	$ST	$lo1,0($tp)	; tp[j-1]
+
+	addic	$ovf,$ovf,-1	; move upmost overflow to XER[CA]
+	li	$ovf,0
+	adde	$hi1,$hi1,$hi0
+	addze	$ovf,$ovf
+	$ST	$hi1,$BNSZ($tp)
+;
+	slwi	$tj,$num,`log($BNSZ)/log(2)`
+	$UCMP	$i,$tj
+	addi	$i,$i,$BNSZ
+	ble-	Louter
+
+	addi	$num,$num,2	; restore $num
+	subfc	$j,$j,$j	; j=0 and "clear" XER[CA]
+	addi	$tp,$sp,$FRAME
+	mtctr	$num
+
+.align	4
+Lsub:	$LDX	$tj,$tp,$j
+	$LDX	$nj,$np,$j
+	subfe	$aj,$nj,$tj	; tp[j]-np[j]
+	$STX	$aj,$rp,$j
+	addi	$j,$j,$BNSZ
+	bdnz-	Lsub
+
+	li	$j,0
+	mtctr	$num
+	subfe	$ovf,$j,$ovf	; handle upmost overflow bit
+	and	$ap,$tp,$ovf
+	andc	$np,$rp,$ovf
+	or	$ap,$ap,$np	; ap=borrow?tp:rp
+
+.align	4
+Lcopy:				; copy or in-place refresh
+	$LDX	$tj,$ap,$j
+	$STX	$tj,$rp,$j
+	$STX	$j,$tp,$j	; zap at once
+	addi	$j,$j,$BNSZ
+	bdnz-	Lcopy
+
+	$POP	r14,`4*$SIZE_T`($sp)
+	$POP	r15,`5*$SIZE_T`($sp)
+	$POP	r16,`6*$SIZE_T`($sp)
+	$POP	r17,`7*$SIZE_T`($sp)
+	$POP	r18,`8*$SIZE_T`($sp)
+	$POP	r19,`9*$SIZE_T`($sp)
+	$POP	r20,`10*$SIZE_T`($sp)
+	$POP	r21,`11*$SIZE_T`($sp)
+	$POP	r22,`12*$SIZE_T`($sp)
+	$POP	r23,`13*$SIZE_T`($sp)
+	$POP	r24,`14*$SIZE_T`($sp)
+	$POP	r25,`15*$SIZE_T`($sp)
+	$POP	$sp,0($sp)
+	li	r3,1
+	blr
+	.long	0
+.asciz  "Montgomery Multiplication for PPC, CRYPTOGAMS by <appro\@fy.chalmers.se>"
+___
+
+$code =~ s/\`([^\`]*)\`/eval $1/gem;
+print $code;
+close STDOUT;