diff options
Diffstat (limited to 'openssl/crypto/bn/asm/x86-gf2m.pl')
| -rw-r--r-- | openssl/crypto/bn/asm/x86-gf2m.pl | 313 |
1 files changed, 313 insertions, 0 deletions
diff --git a/openssl/crypto/bn/asm/x86-gf2m.pl b/openssl/crypto/bn/asm/x86-gf2m.pl new file mode 100644 index 000000000..808a1e596 --- /dev/null +++ b/openssl/crypto/bn/asm/x86-gf2m.pl @@ -0,0 +1,313 @@ +#!/usr/bin/env perl +# +# ==================================================================== +# Written by Andy Polyakov <appro@openssl.org> for the OpenSSL +# project. The module is, however, dual licensed under OpenSSL and +# CRYPTOGAMS licenses depending on where you obtain it. For further +# details see http://www.openssl.org/~appro/cryptogams/. +# ==================================================================== +# +# May 2011 +# +# The module implements bn_GF2m_mul_2x2 polynomial multiplication used +# in bn_gf2m.c. It's kind of low-hanging mechanical port from C for +# the time being... Except that it has three code paths: pure integer +# code suitable for any x86 CPU, MMX code suitable for PIII and later +# and PCLMULQDQ suitable for Westmere and later. Improvement varies +# from one benchmark and µ-arch to another. Below are interval values +# for 163- and 571-bit ECDH benchmarks relative to compiler-generated +# code: +# +# PIII 16%-30% +# P4 12%-12% +# Opteron 18%-40% +# Core2 19%-44% +# Atom 38%-64% +# Westmere 53%-121%(PCLMULQDQ)/20%-32%(MMX) +# Sandy Bridge 72%-127%(PCLMULQDQ)/27%-23%(MMX) +# +# Note that above improvement coefficients are not coefficients for +# bn_GF2m_mul_2x2 itself. For example 120% ECDH improvement is result +# of bn_GF2m_mul_2x2 being >4x faster. As it gets faster, benchmark +# is more and more dominated by other subroutines, most notably by +# BN_GF2m_mod[_mul]_arr... + +$0 =~ m/(.*[\/\\])[^\/\\]+$/; $dir=$1; +push(@INC,"${dir}","${dir}../../perlasm"); +require "x86asm.pl"; + +&asm_init($ARGV[0],$0,$x86only = $ARGV[$#ARGV] eq "386"); + +$sse2=0; +for (@ARGV) { $sse2=1 if (/-DOPENSSL_IA32_SSE2/); } + +&external_label("OPENSSL_ia32cap_P") if ($sse2); + +$a="eax"; +$b="ebx"; +($a1,$a2,$a4)=("ecx","edx","ebp"); + +$R="mm0"; +@T=("mm1","mm2"); +($A,$B,$B30,$B31)=("mm2","mm3","mm4","mm5"); +@i=("esi","edi"); + + if (!$x86only) { +&function_begin_B("_mul_1x1_mmx"); + &sub ("esp",32+4); + &mov ($a1,$a); + &lea ($a2,&DWP(0,$a,$a)); + &and ($a1,0x3fffffff); + &lea ($a4,&DWP(0,$a2,$a2)); + &mov (&DWP(0*4,"esp"),0); + &and ($a2,0x7fffffff); + &movd ($A,$a); + &movd ($B,$b); + &mov (&DWP(1*4,"esp"),$a1); # a1 + &xor ($a1,$a2); # a1^a2 + &pxor ($B31,$B31); + &pxor ($B30,$B30); + &mov (&DWP(2*4,"esp"),$a2); # a2 + &xor ($a2,$a4); # a2^a4 + &mov (&DWP(3*4,"esp"),$a1); # a1^a2 + &pcmpgtd($B31,$A); # broadcast 31st bit + &paddd ($A,$A); # $A<<=1 + &xor ($a1,$a2); # a1^a4=a1^a2^a2^a4 + &mov (&DWP(4*4,"esp"),$a4); # a4 + &xor ($a4,$a2); # a2=a4^a2^a4 + &pand ($B31,$B); + &pcmpgtd($B30,$A); # broadcast 30th bit + &mov (&DWP(5*4,"esp"),$a1); # a1^a4 + &xor ($a4,$a1); # a1^a2^a4 + &psllq ($B31,31); + &pand ($B30,$B); + &mov (&DWP(6*4,"esp"),$a2); # a2^a4 + &mov (@i[0],0x7); + &mov (&DWP(7*4,"esp"),$a4); # a1^a2^a4 + &mov ($a4,@i[0]); + &and (@i[0],$b); + &shr ($b,3); + &mov (@i[1],$a4); + &psllq ($B30,30); + &and (@i[1],$b); + &shr ($b,3); + &movd ($R,&DWP(0,"esp",@i[0],4)); + &mov (@i[0],$a4); + &and (@i[0],$b); + &shr ($b,3); + for($n=1;$n<9;$n++) { + &movd (@T[1],&DWP(0,"esp",@i[1],4)); + &mov (@i[1],$a4); + &psllq (@T[1],3*$n); + &and (@i[1],$b); + &shr ($b,3); + &pxor ($R,@T[1]); + + push(@i,shift(@i)); push(@T,shift(@T)); + } + &movd (@T[1],&DWP(0,"esp",@i[1],4)); + &pxor ($R,$B30); + &psllq (@T[1],3*$n++); + &pxor ($R,@T[1]); + + &movd (@T[0],&DWP(0,"esp",@i[0],4)); + &pxor ($R,$B31); + &psllq (@T[0],3*$n); + &add ("esp",32+4); + &pxor ($R,@T[0]); + &ret (); +&function_end_B("_mul_1x1_mmx"); + } + +($lo,$hi)=("eax","edx"); +@T=("ecx","ebp"); + +&function_begin_B("_mul_1x1_ialu"); + &sub ("esp",32+4); + &mov ($a1,$a); + &lea ($a2,&DWP(0,$a,$a)); + &lea ($a4,&DWP(0,"",$a,4)); + &and ($a1,0x3fffffff); + &lea (@i[1],&DWP(0,$lo,$lo)); + &sar ($lo,31); # broadcast 31st bit + &mov (&DWP(0*4,"esp"),0); + &and ($a2,0x7fffffff); + &mov (&DWP(1*4,"esp"),$a1); # a1 + &xor ($a1,$a2); # a1^a2 + &mov (&DWP(2*4,"esp"),$a2); # a2 + &xor ($a2,$a4); # a2^a4 + &mov (&DWP(3*4,"esp"),$a1); # a1^a2 + &xor ($a1,$a2); # a1^a4=a1^a2^a2^a4 + &mov (&DWP(4*4,"esp"),$a4); # a4 + &xor ($a4,$a2); # a2=a4^a2^a4 + &mov (&DWP(5*4,"esp"),$a1); # a1^a4 + &xor ($a4,$a1); # a1^a2^a4 + &sar (@i[1],31); # broardcast 30th bit + &and ($lo,$b); + &mov (&DWP(6*4,"esp"),$a2); # a2^a4 + &and (@i[1],$b); + &mov (&DWP(7*4,"esp"),$a4); # a1^a2^a4 + &mov ($hi,$lo); + &shl ($lo,31); + &mov (@T[0],@i[1]); + &shr ($hi,1); + + &mov (@i[0],0x7); + &shl (@i[1],30); + &and (@i[0],$b); + &shr (@T[0],2); + &xor ($lo,@i[1]); + + &shr ($b,3); + &mov (@i[1],0x7); # 5-byte instruction!? + &and (@i[1],$b); + &shr ($b,3); + &xor ($hi,@T[0]); + &xor ($lo,&DWP(0,"esp",@i[0],4)); + &mov (@i[0],0x7); + &and (@i[0],$b); + &shr ($b,3); + for($n=1;$n<9;$n++) { + &mov (@T[1],&DWP(0,"esp",@i[1],4)); + &mov (@i[1],0x7); + &mov (@T[0],@T[1]); + &shl (@T[1],3*$n); + &and (@i[1],$b); + &shr (@T[0],32-3*$n); + &xor ($lo,@T[1]); + &shr ($b,3); + &xor ($hi,@T[0]); + + push(@i,shift(@i)); push(@T,shift(@T)); + } + &mov (@T[1],&DWP(0,"esp",@i[1],4)); + &mov (@T[0],@T[1]); + &shl (@T[1],3*$n); + &mov (@i[1],&DWP(0,"esp",@i[0],4)); + &shr (@T[0],32-3*$n); $n++; + &mov (@i[0],@i[1]); + &xor ($lo,@T[1]); + &shl (@i[1],3*$n); + &xor ($hi,@T[0]); + &shr (@i[0],32-3*$n); + &xor ($lo,@i[1]); + &xor ($hi,@i[0]); + + &add ("esp",32+4); + &ret (); +&function_end_B("_mul_1x1_ialu"); + +# void bn_GF2m_mul_2x2(BN_ULONG *r, BN_ULONG a1, BN_ULONG a0, BN_ULONG b1, BN_ULONG b0); +&function_begin_B("bn_GF2m_mul_2x2"); +if (!$x86only) { + &picmeup("edx","OPENSSL_ia32cap_P"); + &mov ("eax",&DWP(0,"edx")); + &mov ("edx",&DWP(4,"edx")); + &test ("eax",1<<23); # check MMX bit + &jz (&label("ialu")); +if ($sse2) { + &test ("eax",1<<24); # check FXSR bit + &jz (&label("mmx")); + &test ("edx",1<<1); # check PCLMULQDQ bit + &jz (&label("mmx")); + + &movups ("xmm0",&QWP(8,"esp")); + &shufps ("xmm0","xmm0",0b10110001); + &pclmulqdq ("xmm0","xmm0",1); + &mov ("eax",&DWP(4,"esp")); + &movups (&QWP(0,"eax"),"xmm0"); + &ret (); + +&set_label("mmx",16); +} + &push ("ebp"); + &push ("ebx"); + &push ("esi"); + &push ("edi"); + &mov ($a,&wparam(1)); + &mov ($b,&wparam(3)); + &call ("_mul_1x1_mmx"); # a1·b1 + &movq ("mm7",$R); + + &mov ($a,&wparam(2)); + &mov ($b,&wparam(4)); + &call ("_mul_1x1_mmx"); # a0·b0 + &movq ("mm6",$R); + + &mov ($a,&wparam(1)); + &mov ($b,&wparam(3)); + &xor ($a,&wparam(2)); + &xor ($b,&wparam(4)); + &call ("_mul_1x1_mmx"); # (a0+a1)·(b0+b1) + &pxor ($R,"mm7"); + &mov ($a,&wparam(0)); + &pxor ($R,"mm6"); # (a0+a1)·(b0+b1)-a1·b1-a0·b0 + + &movq ($A,$R); + &psllq ($R,32); + &pop ("edi"); + &psrlq ($A,32); + &pop ("esi"); + &pxor ($R,"mm6"); + &pop ("ebx"); + &pxor ($A,"mm7"); + &movq (&QWP(0,$a),$R); + &pop ("ebp"); + &movq (&QWP(8,$a),$A); + &emms (); + &ret (); +&set_label("ialu",16); +} + &push ("ebp"); + &push ("ebx"); + &push ("esi"); + &push ("edi"); + &stack_push(4+1); + + &mov ($a,&wparam(1)); + &mov ($b,&wparam(3)); + &call ("_mul_1x1_ialu"); # a1·b1 + &mov (&DWP(8,"esp"),$lo); + &mov (&DWP(12,"esp"),$hi); + + &mov ($a,&wparam(2)); + &mov ($b,&wparam(4)); + &call ("_mul_1x1_ialu"); # a0·b0 + &mov (&DWP(0,"esp"),$lo); + &mov (&DWP(4,"esp"),$hi); + + &mov ($a,&wparam(1)); + &mov ($b,&wparam(3)); + &xor ($a,&wparam(2)); + &xor ($b,&wparam(4)); + &call ("_mul_1x1_ialu"); # (a0+a1)·(b0+b1) + + &mov ("ebp",&wparam(0)); + @r=("ebx","ecx","edi","esi"); + &mov (@r[0],&DWP(0,"esp")); + &mov (@r[1],&DWP(4,"esp")); + &mov (@r[2],&DWP(8,"esp")); + &mov (@r[3],&DWP(12,"esp")); + + &xor ($lo,$hi); + &xor ($hi,@r[1]); + &xor ($lo,@r[0]); + &mov (&DWP(0,"ebp"),@r[0]); + &xor ($hi,@r[2]); + &mov (&DWP(12,"ebp"),@r[3]); + &xor ($lo,@r[3]); + &stack_pop(4+1); + &xor ($hi,@r[3]); + &pop ("edi"); + &xor ($lo,$hi); + &pop ("esi"); + &mov (&DWP(8,"ebp"),$hi); + &pop ("ebx"); + &mov (&DWP(4,"ebp"),$lo); + &pop ("ebp"); + &ret (); +&function_end_B("bn_GF2m_mul_2x2"); + +&asciz ("GF(2^m) Multiplication for x86, CRYPTOGAMS by <appro\@openssl.org>"); + +&asm_finish(); |