aboutsummaryrefslogtreecommitdiff
path: root/openssl/crypto/crypto-lib.com
diff options
context:
space:
mode:
Diffstat (limited to 'openssl/crypto/crypto-lib.com')
-rw-r--r--openssl/crypto/crypto-lib.com2731
1 files changed, 1395 insertions, 1336 deletions
diff --git a/openssl/crypto/crypto-lib.com b/openssl/crypto/crypto-lib.com
index 96d9d5354..f6d6c53cb 100644
--- a/openssl/crypto/crypto-lib.com
+++ b/openssl/crypto/crypto-lib.com
@@ -1,1336 +1,1395 @@
-$!
-$! CRYPTO-LIB.COM
-$! Written By: Robert Byer
-$! Vice-President
-$! A-Com Computing, Inc.
-$! byer@mail.all-net.net
-$!
-$! Changes by Richard Levitte <richard@levitte.org>
-$! Zoltan Arpadffy <arpadffy@polarhome.com>
-$!
-$! This command files compiles and creates the "[.xxx.EXE.CRYPTO]LIBCRYPTO.OLB"
-$! library for OpenSSL. The "xxx" denotes the machine architecture, ALPHA,
-$! IA64 or VAX.
-$!
-$! It was re-written so it would try to determine what "C" compiler to use
-$! or you can specify which "C" compiler to use.
-$!
-$! Specify the following as P1 to build just that part or ALL to just
-$! build everything.
-$!
-$! LIBRARY To just compile the [.xxx.EXE.CRYPTO]LIBCRYPTO.OLB Library.
-$! APPS To just compile the [.xxx.EXE.CRYPTO]*.EXE
-$! ALL To do both LIBRARY and APPS
-$!
-$! Specify DEBUG or NODEBUG as P2 to compile with or without debugger
-$! information.
-$!
-$! Specify which compiler at P3 to try to compile under.
-$!
-$! VAXC For VAX C.
-$! DECC For DEC C.
-$! GNUC For GNU C.
-$!
-$! If you don't specify a compiler, it will try to determine which
-$! "C" compiler to use.
-$!
-$! P4, if defined, sets a TCP/IP library to use, through one of the following
-$! keywords:
-$!
-$! UCX For UCX
-$! TCPIP For TCPIP (post UCX)
-$! SOCKETSHR For SOCKETSHR+NETLIB
-$!
-$! P5, if defined, sets a compiler thread NOT needed on OpenVMS 7.1 (and up)
-$!
-$! P6, if defined, sets a choice of crypto methods to compile.
-$! WARNING: this should only be done to recompile some part of an already
-$! fully compiled library.
-$!
-$!
-$! Define A TCP/IP Library That We Will Need To Link To.
-$! (That Is, If We Need To Link To One.)
-$!
-$ TCPIP_LIB = ""
-$!
-$! Check Which Architecture We Are Using.
-$!
-$ IF (F$GETSYI("CPU").LT.128)
-$ THEN
-$!
-$! The Architecture Is VAX
-$!
-$ ARCH = "VAX"
-$!
-$! Else...
-$!
-$ ELSE
-$!
-$! The Architecture Is Alpha, IA64 or whatever comes in the future.
-$!
-$ ARCH = F$EDIT( F$GETSYI( "ARCH_NAME"), "UPCASE")
-$ IF (ARCH .EQS. "") THEN ARCH = "UNK"
-$!
-$! End The Architecture Check.
-$!
-$ ENDIF
-$!
-$! Define The Different Encryption Types.
-$! NOTE: Some might think this list ugly. However, it's made this way to
-$! reflect the SDIRS variable in [-]Makefile.org as closely as possible,
-$! thereby making it fairly easy to verify that the lists are the same.
-$!
-$ ET_WHIRLPOOL = "WHRLPOOL"
-$ IF ARCH .EQS. "VAX" THEN ET_WHIRLPOOL = ""
-$ ENCRYPT_TYPES = "Basic,"+ -
- "OBJECTS,"+ -
- "MD2,MD4,MD5,SHA,MDC2,HMAC,RIPEMD,"+ET_WHIRLPOOL+","+ -
- "DES,AES,RC2,RC4,RC5,IDEA,BF,CAST,CAMELLIA,SEED,MODES,"+ -
- "BN,EC,RSA,DSA,ECDSA,DH,ECDH,DSO,ENGINE,"+ -
- "BUFFER,BIO,STACK,LHASH,RAND,ERR,"+ -
- "EVP,EVP_2,EVP_3,ASN1,ASN1_2,PEM,X509,X509V3,"+ -
- "CONF,TXT_DB,PKCS7,PKCS12,COMP,OCSP,UI,KRB5,"+ -
- "STORE,CMS,PQUEUE,TS,JPAKE"
-$! Define The OBJ Directory.
-$!
-$ OBJ_DIR := SYS$DISK:[-.'ARCH'.OBJ.CRYPTO]
-$!
-$! Define The EXE Directory.
-$!
-$ EXE_DIR := SYS$DISK:[-.'ARCH'.EXE.CRYPTO]
-$!
-$! Check To Make Sure We Have Valid Command Line Parameters.
-$!
-$ GOSUB CHECK_OPTIONS
-$!
-$! Initialise logical names and such
-$!
-$ GOSUB INITIALISE
-$!
-$! Tell The User What Kind of Machine We Run On.
-$!
-$ WRITE SYS$OUTPUT "Compiling On A ",ARCH," Machine."
-$!
-$!
-$! Check To See If The Architecture Specific OBJ Directory Exists.
-$!
-$ IF (F$PARSE(OBJ_DIR).EQS."")
-$ THEN
-$!
-$! It Dosen't Exist, So Create It.
-$!
-$ CREATE/DIR 'OBJ_DIR'
-$!
-$! End The Architecture Specific OBJ Directory Check.
-$!
-$ ENDIF
-$!
-$! Check To See If The Architecture Specific Directory Exists.
-$!
-$ IF (F$PARSE(EXE_DIR).EQS."")
-$ THEN
-$!
-$! It Dosen't Exist, So Create It.
-$!
-$ CREATE/DIRECTORY 'EXE_DIR'
-$!
-$! End The Architecture Specific Directory Check.
-$!
-$ ENDIF
-$!
-$! Define The Library Name.
-$!
-$ LIB_NAME := 'EXE_DIR'LIBCRYPTO.OLB
-$!
-$! Define The CRYPTO-LIB We Are To Use.
-$!
-$ CRYPTO_LIB := 'EXE_DIR'LIBCRYPTO.OLB
-$!
-$! Check To See If We Already Have A "[.xxx.EXE.CRYPTO]LIBCRYPTO.OLB" Library...
-$!
-$ IF (F$SEARCH(LIB_NAME).EQS."")
-$ THEN
-$!
-$! Guess Not, Create The Library.
-$!
-$ LIBRARY/CREATE/OBJECT 'LIB_NAME'
-$!
-$! End The Library Check.
-$!
-$ ENDIF
-$!
-$! Build our options file for the application
-$!
-$ GOSUB CHECK_OPT_FILE
-$!
-$! Define The Different Encryption "library" Strings.
-$!
-$ APPS_DES = "DES/DES,CBC3_ENC"
-$ APPS_PKCS7 = "ENC/ENC;DEC/DEC;SIGN/SIGN;VERIFY/VERIFY,EXAMPLE"
-$
-$ LIB_ = "cryptlib,mem,mem_clr,mem_dbg,cversion,ex_data,cpt_err,ebcdic,uid,o_time,o_str,o_dir"
-$ LIB_MD2 = "md2_dgst,md2_one"
-$ LIB_MD4 = "md4_dgst,md4_one"
-$ LIB_MD5 = "md5_dgst,md5_one"
-$ LIB_SHA = "sha_dgst,sha1dgst,sha_one,sha1_one,sha256,sha512"
-$ LIB_MDC2 = "mdc2dgst,mdc2_one"
-$ LIB_HMAC = "hmac,hm_ameth,hm_pmeth"
-$ LIB_RIPEMD = "rmd_dgst,rmd_one"
-$ LIB_WHRLPOOL = "wp_dgst,wp_block"
-$ LIB_DES = "set_key,ecb_enc,cbc_enc,"+ -
- "ecb3_enc,cfb64enc,cfb64ede,cfb_enc,ofb64ede,"+ -
- "enc_read,enc_writ,ofb64enc,"+ -
- "ofb_enc,str2key,pcbc_enc,qud_cksm,rand_key,"+ -
- "des_enc,fcrypt_b,"+ -
- "fcrypt,xcbc_enc,rpc_enc,cbc_cksm,"+ -
- "ede_cbcm_enc,des_old,des_old2,read2pwd"
-$ LIB_RC2 = "rc2_ecb,rc2_skey,rc2_cbc,rc2cfb64,rc2ofb64"
-$ LIB_RC4 = "rc4_skey,rc4_enc"
-$ LIB_RC5 = "rc5_skey,rc5_ecb,rc5_enc,rc5cfb64,rc5ofb64"
-$ LIB_IDEA = "i_cbc,i_cfb64,i_ofb64,i_ecb,i_skey"
-$ LIB_BF = "bf_skey,bf_ecb,bf_enc,bf_cfb64,bf_ofb64"
-$ LIB_CAST = "c_skey,c_ecb,c_enc,c_cfb64,c_ofb64"
-$ LIB_CAMELLIA = "camellia,cmll_misc,cmll_ecb,cmll_cbc,cmll_ofb,"+ -
- "cmll_cfb,cmll_ctr"
-$ LIB_SEED = "seed,seed_ecb,seed_cbc,seed_cfb,seed_ofb"
-$ LIB_MODES = "cbc128,ctr128,cfb128,ofb128,cts128"
-$ LIB_BN_ASM = "[.asm]vms.mar,vms-helper"
-$ IF F$TRNLNM("OPENSSL_NO_ASM") .OR. ARCH .NES. "VAX" THEN -
- LIB_BN_ASM = "bn_asm"
-$ LIB_BN = "bn_add,bn_div,bn_exp,bn_lib,bn_ctx,bn_mul,bn_mod,"+ -
- "bn_print,bn_rand,bn_shift,bn_word,bn_blind,"+ -
- "bn_kron,bn_sqrt,bn_gcd,bn_prime,bn_err,bn_sqr,"+LIB_BN_ASM+","+ -
- "bn_recp,bn_mont,bn_mpi,bn_exp2,bn_gf2m,bn_nist,"+ -
- "bn_depr,bn_const"
-$ LIB_EC = "ec_lib,ecp_smpl,ecp_mont,ecp_nist,ec_cvt,ec_mult,"+ -
- "ec_err,ec_curve,ec_check,ec_print,ec_asn1,ec_key,"+ -
- "ec2_smpl,ec2_mult,ec_ameth,ec_pmeth,eck_prn"
-$ LIB_RSA = "rsa_eay,rsa_gen,rsa_lib,rsa_sign,rsa_saos,rsa_err,"+ -
- "rsa_pk1,rsa_ssl,rsa_none,rsa_oaep,rsa_chk,rsa_null,"+ -
- "rsa_pss,rsa_x931,rsa_asn1,rsa_depr,rsa_ameth,rsa_prn,"+ -
- "rsa_pmeth"
-$ LIB_DSA = "dsa_gen,dsa_key,dsa_lib,dsa_asn1,dsa_vrf,dsa_sign,"+ -
- "dsa_err,dsa_ossl,dsa_depr,dsa_ameth,dsa_pmeth,dsa_prn"
-$ LIB_ECDSA = "ecs_lib,ecs_asn1,ecs_ossl,ecs_sign,ecs_vrf,ecs_err"
-$ LIB_DH = "dh_asn1,dh_gen,dh_key,dh_lib,dh_check,dh_err,dh_depr,"+ -
- "dh_ameth,dh_pmeth,dh_prn"
-$ LIB_ECDH = "ech_lib,ech_ossl,ech_key,ech_err"
-$ LIB_DSO = "dso_dl,dso_dlfcn,dso_err,dso_lib,dso_null,"+ -
- "dso_openssl,dso_win32,dso_vms,dso_beos"
-$ LIB_ENGINE = "eng_err,eng_lib,eng_list,eng_init,eng_ctrl,"+ -
- "eng_table,eng_pkey,eng_fat,eng_all,"+ -
- "tb_rsa,tb_dsa,tb_ecdsa,tb_dh,tb_ecdh,tb_rand,tb_store,"+ -
- "tb_cipher,tb_digest,tb_pkmeth,tb_asnmth,"+ -
- "eng_openssl,eng_dyn,eng_cnf,eng_cryptodev"
-$ LIB_AES = "aes_core,aes_misc,aes_ecb,aes_cbc,aes_cfb,aes_ofb,aes_ctr,"+ -
- "aes_ige,aes_wrap"
-$ LIB_BUFFER = "buffer,buf_err"
-$ LIB_BIO = "bio_lib,bio_cb,bio_err,"+ -
- "bss_mem,bss_null,bss_fd,"+ -
- "bss_file,bss_sock,bss_conn,"+ -
- "bf_null,bf_buff,b_print,b_dump,"+ -
- "b_sock,bss_acpt,bf_nbio,bss_rtcp,bss_bio,bss_log,"+ -
- "bss_dgram,"+ -
- "bf_lbuf"
-$ LIB_STACK = "stack"
-$ LIB_LHASH = "lhash,lh_stats"
-$ LIB_RAND = "md_rand,randfile,rand_lib,rand_err,rand_egd,"+ -
- "rand_vms"
-$ LIB_ERR = "err,err_all,err_prn"
-$ LIB_OBJECTS = "o_names,obj_dat,obj_lib,obj_err,obj_xref"
-$ LIB_EVP = "encode,digest,evp_enc,evp_key,evp_acnf,"+ -
- "e_des,e_bf,e_idea,e_des3,e_camellia,"+ -
- "e_rc4,e_aes,names,e_seed,"+ -
- "e_xcbc_d,e_rc2,e_cast,e_rc5"
-$ LIB_EVP_2 = "m_null,m_md2,m_md4,m_md5,m_sha,m_sha1,m_wp," + -
- "m_dss,m_dss1,m_mdc2,m_ripemd,m_ecdsa,"+ -
- "p_open,p_seal,p_sign,p_verify,p_lib,p_enc,p_dec,"+ -
- "bio_md,bio_b64,bio_enc,evp_err,e_null,"+ -
- "c_all,c_allc,c_alld,evp_lib,bio_ok,"+-
- "evp_pkey,evp_pbe,p5_crpt,p5_crpt2"
-$ LIB_EVP_3 = "e_old,pmeth_lib,pmeth_fn,pmeth_gn,m_sigver"
-$ LIB_ASN1 = "a_object,a_bitstr,a_utctm,a_gentm,a_time,a_int,a_octet,"+ -
- "a_print,a_type,a_set,a_dup,a_d2i_fp,a_i2d_fp,"+ -
- "a_enum,a_utf8,a_sign,a_digest,a_verify,a_mbstr,a_strex,"+ -
- "x_algor,x_val,x_pubkey,x_sig,x_req,x_attrib,x_bignum,"+ -
- "x_long,x_name,x_x509,x_x509a,x_crl,x_info,x_spki,nsseq,"+ -
- "x_nx509,d2i_pu,d2i_pr,i2d_pu,i2d_pr"
-$ LIB_ASN1_2 = "t_req,t_x509,t_x509a,t_crl,t_pkey,t_spki,t_bitst,"+ -
- "tasn_new,tasn_fre,tasn_enc,tasn_dec,tasn_utl,tasn_typ,"+ -
- "tasn_prn,ameth_lib,"+ -
- "f_int,f_string,n_pkey,"+ -
- "f_enum,x_pkey,a_bool,x_exten,bio_asn1,bio_ndef,asn_mime,"+ -
- "asn1_gen,asn1_par,asn1_lib,asn1_err,a_bytes,a_strnid,"+ -
- "evp_asn1,asn_pack,p5_pbe,p5_pbev2,p8_pkey,asn_moid"
-$ LIB_PEM = "pem_sign,pem_seal,pem_info,pem_lib,pem_all,pem_err,"+ -
- "pem_x509,pem_xaux,pem_oth,pem_pk8,pem_pkey,pvkfmt"
-$ LIB_X509 = "x509_def,x509_d2,x509_r2x,x509_cmp,"+ -
- "x509_obj,x509_req,x509spki,x509_vfy,"+ -
- "x509_set,x509cset,x509rset,x509_err,"+ -
- "x509name,x509_v3,x509_ext,x509_att,"+ -
- "x509type,x509_lu,x_all,x509_txt,"+ -
- "x509_trs,by_file,by_dir,x509_vpm"
-$ LIB_X509V3 = "v3_bcons,v3_bitst,v3_conf,v3_extku,v3_ia5,v3_lib,"+ -
- "v3_prn,v3_utl,v3err,v3_genn,v3_alt,v3_skey,v3_akey,v3_pku,"+ -
- "v3_int,v3_enum,v3_sxnet,v3_cpols,v3_crld,v3_purp,v3_info,"+ -
- "v3_ocsp,v3_akeya,v3_pmaps,v3_pcons,v3_ncons,v3_pcia,v3_pci,"+ -
- "pcy_cache,pcy_node,pcy_data,pcy_map,pcy_tree,pcy_lib,"+ -
- "v3_asid,v3_addr"
-$ LIB_CONF = "conf_err,conf_lib,conf_api,conf_def,conf_mod,conf_mall,conf_sap"
-$ LIB_TXT_DB = "txt_db"
-$ LIB_PKCS7 = "pk7_asn1,pk7_lib,pkcs7err,pk7_doit,pk7_smime,pk7_attr,"+ -
- "pk7_mime,bio_pk7"
-$ LIB_PKCS12 = "p12_add,p12_asn,p12_attr,p12_crpt,p12_crt,p12_decr,"+ -
- "p12_init,p12_key,p12_kiss,p12_mutl,"+ -
- "p12_utl,p12_npas,pk12err,p12_p8d,p12_p8e"
-$ LIB_COMP = "comp_lib,comp_err,"+ -
- "c_rle,c_zlib"
-$ LIB_OCSP = "ocsp_asn,ocsp_ext,ocsp_ht,ocsp_lib,ocsp_cl,"+ -
- "ocsp_srv,ocsp_prn,ocsp_vfy,ocsp_err"
-$ LIB_UI_COMPAT = ",ui_compat"
-$ LIB_UI = "ui_err,ui_lib,ui_openssl,ui_util"+LIB_UI_COMPAT
-$ LIB_KRB5 = "krb5_asn"
-$ LIB_STORE = "str_err,str_lib,str_meth,str_mem"
-$ LIB_CMS = "cms_lib,cms_asn1,cms_att,cms_io,cms_smime,cms_err,"+ -
- "cms_sd,cms_dd,cms_cd,cms_env,cms_enc,cms_ess"
-$ LIB_PQUEUE = "pqueue"
-$ LIB_TS = "ts_err,ts_req_utils,ts_req_print,ts_rsp_utils,ts_rsp_print,"+ -
- "ts_rsp_sign,ts_rsp_verify,ts_verify_ctx,ts_lib,ts_conf,"+ -
- "ts_asn1"
-$ LIB_JPAKE = "jpake,jpake_err"
-$!
-$! Setup exceptional compilations
-$!
-$ ! Add definitions for no threads on OpenVMS 7.1 and higher
-$ COMPILEWITH_CC3 = ",bss_rtcp,"
-$ ! Disable the DOLLARID warning
-$ COMPILEWITH_CC4 = ",a_utctm,bss_log,o_time,o_dir"
-$ ! Disable disjoint optimization
-$ COMPILEWITH_CC5 = ",md2_dgst,md4_dgst,md5_dgst,mdc2dgst," + -
- "seed,sha_dgst,sha1dgst,rmd_dgst,bf_enc,"
-$ ! Disable the MIXLINKAGE warning
-$ COMPILEWITH_CC6 = ",enc_read,set_key,"
-$!
-$! Figure Out What Other Modules We Are To Build.
-$!
-$ BUILD_SET:
-$!
-$! Define A Module Counter.
-$!
-$ MODULE_COUNTER = 0
-$!
-$! Top Of The Loop.
-$!
-$ MODULE_NEXT:
-$!
-$! Extract The Module Name From The Encryption List.
-$!
-$ MODULE_NAME = F$ELEMENT(MODULE_COUNTER,",",ENCRYPT_TYPES)
-$ IF MODULE_NAME.EQS."Basic" THEN MODULE_NAME = ""
-$ MODULE_NAME1 = MODULE_NAME
-$!
-$! Check To See If We Are At The End Of The Module List.
-$!
-$ IF (MODULE_NAME.EQS.",")
-$ THEN
-$!
-$! We Are At The End Of The Module List, Go To MODULE_DONE.
-$!
-$ GOTO MODULE_DONE
-$!
-$! End The Module List Check.
-$!
-$ ENDIF
-$!
-$! Increment The Moudle Counter.
-$!
-$ MODULE_COUNTER = MODULE_COUNTER + 1
-$!
-$! Create The Library and Apps Module Names.
-$!
-$ LIB_MODULE = "LIB_" + MODULE_NAME
-$ APPS_MODULE = "APPS_" + MODULE_NAME
-$ IF (F$EXTRACT(0,5,MODULE_NAME).EQS."ASN1_")
-$ THEN
-$ MODULE_NAME = "ASN1"
-$ ENDIF
-$ IF (F$EXTRACT(0,4,MODULE_NAME).EQS."EVP_")
-$ THEN
-$ MODULE_NAME = "EVP"
-$ ENDIF
-$!
-$! Set state (can be LIB and APPS)
-$!
-$ STATE = "LIB"
-$ IF BUILDALL .EQS. "APPS" THEN STATE = "APPS"
-$!
-$! Check if the library module name actually is defined
-$!
-$ IF F$TYPE('LIB_MODULE') .EQS. ""
-$ THEN
-$ WRITE SYS$ERROR ""
-$ WRITE SYS$ERROR "The module ",MODULE_NAME1," does not exist. Continuing..."
-$ WRITE SYS$ERROR ""
-$ GOTO MODULE_NEXT
-$ ENDIF
-$!
-$! Top Of The Module Loop.
-$!
-$ MODULE_AGAIN:
-$!
-$! Tell The User What Module We Are Building.
-$!
-$ IF (MODULE_NAME1.NES."")
-$ THEN
-$ IF STATE .EQS. "LIB"
-$ THEN
-$ WRITE SYS$OUTPUT "Compiling The ",MODULE_NAME1," Library Files. (",BUILDALL,",",STATE,")"
-$ ELSE IF F$TYPE('APPS_MODULE') .NES. ""
-$ THEN
-$ WRITE SYS$OUTPUT "Compiling The ",MODULE_NAME1," Applications. (",BUILDALL,",",STATE,")"
-$ ENDIF
-$ ENDIF
-$ ENDIF
-$!
-$! Define A File Counter And Set It To "0".
-$!
-$ FILE_COUNTER = 0
-$ APPLICATION = ""
-$ APPLICATION_COUNTER = 0
-$!
-$! Top Of The File Loop.
-$!
-$ NEXT_FILE:
-$!
-$! Look in the LIB_MODULE is we're in state LIB
-$!
-$ IF STATE .EQS. "LIB"
-$ THEN
-$!
-$! O.K, Extract The File Name From The File List.
-$!
-$ FILE_NAME = F$ELEMENT(FILE_COUNTER,",",'LIB_MODULE')
-$!
-$! else
-$!
-$ ELSE
-$ FILE_NAME = ","
-$!
-$ IF F$TYPE('APPS_MODULE') .NES. ""
-$ THEN
-$!
-$! Extract The File Name From The File List.
-$! This part is a bit more complicated.
-$!
-$ IF APPLICATION .EQS. ""
-$ THEN
-$ APPLICATION = F$ELEMENT(APPLICATION_COUNTER,";",'APPS_MODULE')
-$ APPLICATION_COUNTER = APPLICATION_COUNTER + 1
-$ APPLICATION_OBJECTS = F$ELEMENT(1,"/",APPLICATION)
-$ APPLICATION = F$ELEMENT(0,"/",APPLICATION)
-$ FILE_COUNTER = 0
-$ ENDIF
-$
-$! WRITE SYS$OUTPUT "DEBUG: SHOW SYMBOL APPLICATION*"
-$! SHOW SYMBOL APPLICATION*
-$!
-$ IF APPLICATION .NES. ";"
-$ THEN
-$ FILE_NAME = F$ELEMENT(FILE_COUNTER,",",APPLICATION_OBJECTS)
-$ IF FILE_NAME .EQS. ","
-$ THEN
-$ APPLICATION = ""
-$ GOTO NEXT_FILE
-$ ENDIF
-$ ENDIF
-$ ENDIF
-$ ENDIF
-$!
-$! Check To See If We Are At The End Of The File List.
-$!
-$ IF (FILE_NAME.EQS.",")
-$ THEN
-$!
-$! We Are At The End Of The File List, Change State Or Goto FILE_DONE.
-$!
-$ IF STATE .EQS. "LIB" .AND. BUILDALL .NES. "LIBRARY"
-$ THEN
-$ STATE = "APPS"
-$ GOTO MODULE_AGAIN
-$ ELSE
-$ GOTO FILE_DONE
-$ ENDIF
-$!
-$! End The File List Check.
-$!
-$ ENDIF
-$!
-$! Increment The Counter.
-$!
-$ FILE_COUNTER = FILE_COUNTER + 1
-$!
-$! Create The Source File Name.
-$!
-$ TMP_FILE_NAME = F$ELEMENT(1,"]",FILE_NAME)
-$ IF TMP_FILE_NAME .EQS. "]" THEN TMP_FILE_NAME = FILE_NAME
-$ IF F$ELEMENT(0,".",TMP_FILE_NAME) .EQS. TMP_FILE_NAME THEN -
- FILE_NAME = FILE_NAME + ".c"
-$ IF (MODULE_NAME.NES."")
-$ THEN
-$ SOURCE_FILE = "SYS$DISK:[." + MODULE_NAME+ "]" + FILE_NAME
-$ ELSE
-$ SOURCE_FILE = "SYS$DISK:[]" + FILE_NAME
-$ ENDIF
-$ SOURCE_FILE = SOURCE_FILE - "]["
-$!
-$! Create The Object File Name.
-$!
-$ OBJECT_FILE = OBJ_DIR + F$PARSE(FILE_NAME,,,"NAME","SYNTAX_ONLY") + ".OBJ"
-$ ON WARNING THEN GOTO NEXT_FILE
-$!
-$! Check To See If The File We Want To Compile Is Actually There.
-$!
-$ IF (F$SEARCH(SOURCE_FILE).EQS."")
-$ THEN
-$!
-$! Tell The User That The File Doesn't Exist.
-$!
-$ WRITE SYS$OUTPUT ""
-$ WRITE SYS$OUTPUT "The File ",SOURCE_FILE," Doesn't Exist."
-$ WRITE SYS$OUTPUT ""
-$!
-$! Exit The Build.
-$!
-$ GOTO EXIT
-$!
-$! End The File Exist Check.
-$!
-$ ENDIF
-$!
-$! Tell The User We Are Compiling The File.
-$!
-$ IF (MODULE_NAME.EQS."")
-$ THEN
-$ WRITE SYS$OUTPUT "Compiling The ",FILE_NAME," File. (",BUILDALL,",",STATE,")"
-$ ENDIF
-$ IF (MODULE_NAME.NES."")
-$ THEN
-$ WRITE SYS$OUTPUT " ",FILE_NAME,""
-$ ENDIF
-$!
-$! Compile The File.
-$!
-$ ON ERROR THEN GOTO NEXT_FILE
-$ FILE_NAME0 = F$ELEMENT(0,".",FILE_NAME)
-$ IF FILE_NAME - ".mar" .NES. FILE_NAME
-$ THEN
-$ MACRO/OBJECT='OBJECT_FILE' 'SOURCE_FILE'
-$ ELSE
-$ IF COMPILEWITH_CC3 - FILE_NAME0 .NES. COMPILEWITH_CC3
-$ THEN
-$ CC3/OBJECT='OBJECT_FILE' 'SOURCE_FILE'
-$ ELSE
-$ IF COMPILEWITH_CC4 - FILE_NAME0 .NES. COMPILEWITH_CC4
-$ THEN
-$ CC4/OBJECT='OBJECT_FILE' 'SOURCE_FILE'
-$ ELSE
-$ IF COMPILEWITH_CC5 - FILE_NAME0 .NES. COMPILEWITH_CC5
-$ THEN
-$ CC5/OBJECT='OBJECT_FILE' 'SOURCE_FILE'
-$ ELSE
-$ IF COMPILEWITH_CC6 - FILE_NAME0 .NES. COMPILEWITH_CC6
-$ THEN
-$ CC6/OBJECT='OBJECT_FILE' 'SOURCE_FILE'
-$ ELSE
-$ CC/OBJECT='OBJECT_FILE' 'SOURCE_FILE'
-$ ENDIF
-$ ENDIF
-$ ENDIF
-$ ENDIF
-$ ENDIF
-$ IF STATE .EQS. "LIB"
-$ THEN
-$!
-$! Add It To The Library.
-$!
-$ LIBRARY/REPLACE 'LIB_NAME' 'OBJECT_FILE'
-$!
-$! Time To Clean Up The Object File.
-$!
-$ DELETE 'OBJECT_FILE';*
-$ ENDIF
-$!
-$! Go Back And Do It Again.
-$!
-$ GOTO NEXT_FILE
-$!
-$! All Done With This Library Part.
-$!
-$ FILE_DONE:
-$!
-$! Time To Build Some Applications
-$!
-$ IF F$TYPE('APPS_MODULE') .NES. "" .AND. BUILDALL .NES. "LIBRARY"
-$ THEN
-$ APPLICATION_COUNTER = 0
-$ NEXT_APPLICATION:
-$ APPLICATION = F$ELEMENT(APPLICATION_COUNTER,";",'APPS_MODULE')
-$ IF APPLICATION .EQS. ";" THEN GOTO APPLICATION_DONE
-$
-$ APPLICATION_COUNTER = APPLICATION_COUNTER + 1
-$ APPLICATION_OBJECTS = F$ELEMENT(1,"/",APPLICATION)
-$ APPLICATION = F$ELEMENT(0,"/",APPLICATION)
-$
-$! WRITE SYS$OUTPUT "DEBUG: SHOW SYMBOL APPLICATION*"
-$! SHOW SYMBOL APPLICATION*
-$!
-$! Tell the user what happens
-$!
-$ WRITE SYS$OUTPUT " ",APPLICATION,".exe"
-$!
-$! Link The Program.
-$!
-$ ON ERROR THEN GOTO NEXT_APPLICATION
-$!
-$! Check To See If We Are To Link With A Specific TCP/IP Library.
-$!
-$ IF (TCPIP_LIB.NES."")
-$ THEN
-$!
-$! Link With A TCP/IP Library.
-$!
-$ LINK/'DEBUGGER'/'TRACEBACK'/EXE='EXE_DIR''APPLICATION'.EXE -
- 'OBJ_DIR''APPLICATION_OBJECTS', -
- 'CRYPTO_LIB'/LIBRARY, -
- 'TCPIP_LIB','OPT_FILE'/OPTION
-$!
-$! Else...
-$!
-$ ELSE
-$!
-$! Don't Link With A TCP/IP Library.
-$!
-$ LINK/'DEBUGGER'/'TRACEBACK'/EXE='EXE_DIR''APPLICATION'.EXE -
- 'OBJ_DIR''APPLICATION_OBJECTS',-
- 'CRYPTO_LIB'/LIBRARY, -
- 'OPT_FILE'/OPTION
-$!
-$! End The TCP/IP Library Check.
-$!
-$ ENDIF
-$ GOTO NEXT_APPLICATION
-$ APPLICATION_DONE:
-$ ENDIF
-$!
-$! Go Back And Get The Next Module.
-$!
-$ GOTO MODULE_NEXT
-$!
-$! All Done With This Module.
-$!
-$ MODULE_DONE:
-$!
-$! Tell The User That We Are All Done.
-$!
-$ WRITE SYS$OUTPUT "All Done..."
-$ EXIT:
-$ GOSUB CLEANUP
-$ EXIT
-$!
-$! Check For The Link Option FIle.
-$!
-$ CHECK_OPT_FILE:
-$!
-$! Check To See If We Need To Make A VAX C Option File.
-$!
-$ IF (COMPILER.EQS."VAXC")
-$ THEN
-$!
-$! Check To See If We Already Have A VAX C Linker Option File.
-$!
-$ IF (F$SEARCH(OPT_FILE).EQS."")
-$ THEN
-$!
-$! We Need A VAX C Linker Option File.
-$!
-$ CREATE 'OPT_FILE'
-$DECK
-!
-! Default System Options File To Link Agianst
-! The Sharable VAX C Runtime Library.
-!
-SYS$SHARE:VAXCRTL.EXE/SHARE
-$EOD
-$!
-$! End The Option File Check.
-$!
-$ ENDIF
-$!
-$! End The VAXC Check.
-$!
-$ ENDIF
-$!
-$! Check To See If We Need A GNU C Option File.
-$!
-$ IF (COMPILER.EQS."GNUC")
-$ THEN
-$!
-$! Check To See If We Already Have A GNU C Linker Option File.
-$!
-$ IF (F$SEARCH(OPT_FILE).EQS."")
-$ THEN
-$!
-$! We Need A GNU C Linker Option File.
-$!
-$ CREATE 'OPT_FILE'
-$DECK
-!
-! Default System Options File To Link Agianst
-! The Sharable C Runtime Library.
-!
-GNU_CC:[000000]GCCLIB/LIBRARY
-SYS$SHARE:VAXCRTL/SHARE
-$EOD
-$!
-$! End The Option File Check.
-$!
-$ ENDIF
-$!
-$! End The GNU C Check.
-$!
-$ ENDIF
-$!
-$! Check To See If We Need A DEC C Option File.
-$!
-$ IF (COMPILER.EQS."DECC")
-$ THEN
-$!
-$! Check To See If We Already Have A DEC C Linker Option File.
-$!
-$ IF (F$SEARCH(OPT_FILE).EQS."")
-$ THEN
-$!
-$! Figure Out If We Need A non-VAX Or A VAX Linker Option File.
-$!
-$ IF ARCH .EQS. "VAX"
-$ THEN
-$!
-$! We Need A DEC C Linker Option File For VAX.
-$!
-$ CREATE 'OPT_FILE'
-$DECK
-!
-! Default System Options File To Link Agianst
-! The Sharable DEC C Runtime Library.
-!
-SYS$SHARE:DECC$SHR.EXE/SHARE
-$EOD
-$!
-$! Else...
-$!
-$ ELSE
-$!
-$! Create The non-VAX Linker Option File.
-$!
-$ CREATE 'OPT_FILE'
-$DECK
-!
-! Default System Options File For non-VAX To Link Agianst
-! The Sharable C Runtime Library.
-!
-SYS$SHARE:CMA$OPEN_LIB_SHR/SHARE
-SYS$SHARE:CMA$OPEN_RTL/SHARE
-$EOD
-$!
-$! End The DEC C Option File Check.
-$!
-$ ENDIF
-$!
-$! End The Option File Search.
-$!
-$ ENDIF
-$!
-$! End The DEC C Check.
-$!
-$ ENDIF
-$!
-$! Tell The User What Linker Option File We Are Using.
-$!
-$ WRITE SYS$OUTPUT "Using Linker Option File ",OPT_FILE,"."
-$!
-$! Time To RETURN.
-$!
-$ RETURN
-$!
-$! Check The User's Options.
-$!
-$ CHECK_OPTIONS:
-$!
-$! Check To See If P1 Is Blank.
-$!
-$ IF (P1.EQS."ALL")
-$ THEN
-$!
-$! P1 Is Blank, So Build Everything.
-$!
-$ BUILDALL = "TRUE"
-$!
-$! Else...
-$!
-$ ELSE
-$!
-$! Else, Check To See If P1 Has A Valid Argument.
-$!
-$ IF (P1.EQS."LIBRARY").OR.(P1.EQS."APPS")
-$ THEN
-$!
-$! A Valid Argument.
-$!
-$ BUILDALL = P1
-$!
-$! Else...
-$!
-$ ELSE
-$!
-$! Tell The User We Don't Know What They Want.
-$!
-$ WRITE SYS$OUTPUT ""
-$ WRITE SYS$OUTPUT "The Option ",P1," Is Invalid. The Valid Options Are:"
-$ WRITE SYS$OUTPUT ""
-$ WRITE SYS$OUTPUT " ALL : Just Build Everything."
-$ WRITE SYS$OUTPUT " LIBRARY : To Compile Just The [.xxx.EXE.CRYPTO]LIBCRYPTO.OLB Library."
-$ WRITE SYS$OUTPUT " APPS : To Compile Just The [.xxx.EXE.CRYPTO]*.EXE Programs."
-$ WRITE SYS$OUTPUT ""
-$ WRITE SYS$OUTPUT " Where 'xxx' Stands For:"
-$ WRITE SYS$OUTPUT ""
-$ WRITE SYS$OUTPUT " ALPHA : Alpha Architecture."
-$ WRITE SYS$OUTPUT " IA64 : IA64 Architecture."
-$ WRITE SYS$OUTPUT " VAX : VAX Architecture."
-$ WRITE SYS$OUTPUT ""
-$!
-$! Time To EXIT.
-$!
-$ EXIT
-$!
-$! End The Valid Argument Check.
-$!
-$ ENDIF
-$!
-$! End The P1 Check.
-$!
-$ ENDIF
-$!
-$! Check To See If P2 Is Blank.
-$!
-$ IF (P2.EQS."NODEBUG")
-$ THEN
-$!
-$! P2 Is NODEBUG, So Compile Without The Debugger Information.
-$!
-$ DEBUGGER = "NODEBUG"
-$ TRACEBACK = "NOTRACEBACK"
-$ GCC_OPTIMIZE = "OPTIMIZE"
-$ CC_OPTIMIZE = "OPTIMIZE"
-$ MACRO_OPTIMIZE = "OPTIMIZE"
-$ WRITE SYS$OUTPUT "No Debugger Information Will Be Produced During Compile."
-$ WRITE SYS$OUTPUT "Compiling With Compiler Optimization."
-$ ELSE
-$!
-$! Check To See If We Are To Compile With Debugger Information.
-$!
-$ IF (P2.EQS."DEBUG")
-$ THEN
-$!
-$! Compile With Debugger Information.
-$!
-$ DEBUGGER = "DEBUG"
-$ TRACEBACK = "TRACEBACK"
-$ GCC_OPTIMIZE = "NOOPTIMIZE"
-$ CC_OPTIMIZE = "NOOPTIMIZE"
-$ MACRO_OPTIMIZE = "NOOPTIMIZE"
-$ WRITE SYS$OUTPUT "Debugger Information Will Be Produced During Compile."
-$ WRITE SYS$OUTPUT "Compiling Without Compiler Optimization."
-$ ELSE
-$!
-$! They Entered An Invalid Option..
-$!
-$ WRITE SYS$OUTPUT ""
-$ WRITE SYS$OUTPUT "The Option ",P2," Is Invalid. The Valid Options Are:"
-$ WRITE SYS$OUTPUT ""
-$ WRITE SYS$OUTPUT " DEBUG : Compile With The Debugger Information."
-$ WRITE SYS$OUTPUT " NODEBUG : Compile Without The Debugger Information."
-$ WRITE SYS$OUTPUT ""
-$!
-$! Time To EXIT.
-$!
-$ EXIT
-$!
-$! End The Valid Argument Check.
-$!
-$ ENDIF
-$!
-$! End The P2 Check.
-$!
-$ ENDIF
-$!
-$! Special Threads For OpenVMS v7.1 Or Later
-$!
-$! Written By: Richard Levitte
-$! richard@levitte.org
-$!
-$!
-$! Check To See If We Have A Option For P5.
-$!
-$ IF (P5.EQS."")
-$ THEN
-$!
-$! Get The Version Of VMS We Are Using.
-$!
-$ ISSEVEN :=
-$ TMP = F$ELEMENT(0,"-",F$EXTRACT(1,4,F$GETSYI("VERSION")))
-$ TMP = F$INTEGER(F$ELEMENT(0,".",TMP)+F$ELEMENT(1,".",TMP))
-$!
-$! Check To See If The VMS Version Is v7.1 Or Later.
-$!
-$ IF (TMP.GE.71)
-$ THEN
-$!
-$! We Have OpenVMS v7.1 Or Later, So Use The Special Threads.
-$!
-$ ISSEVEN := ,PTHREAD_USE_D4
-$!
-$! End The VMS Version Check.
-$!
-$ ENDIF
-$!
-$! End The P5 Check.
-$!
-$ ENDIF
-$!
-$! Check To See If P3 Is Blank.
-$!
-$ IF (P3.EQS."")
-$ THEN
-$!
-$! O.K., The User Didn't Specify A Compiler, Let's Try To
-$! Find Out Which One To Use.
-$!
-$! Check To See If We Have GNU C.
-$!
-$ IF (F$TRNLNM("GNU_CC").NES."")
-$ THEN
-$!
-$! Looks Like GNUC, Set To Use GNUC.
-$!
-$ P3 = "GNUC"
-$!
-$! Else...
-$!
-$ ELSE
-$!
-$! Check To See If We Have VAXC Or DECC.
-$!
-$ IF (ARCH.NES."VAX").OR.(F$TRNLNM("DECC$CC_DEFAULT").NES."")
-$ THEN
-$!
-$! Looks Like DECC, Set To Use DECC.
-$!
-$ P3 = "DECC"
-$!
-$! Else...
-$!
-$ ELSE
-$!
-$! Looks Like VAXC, Set To Use VAXC.
-$!
-$ P3 = "VAXC"
-$!
-$! End The VAXC Compiler Check.
-$!
-$ ENDIF
-$!
-$! End The DECC & VAXC Compiler Check.
-$!
-$ ENDIF
-$!
-$! End The Compiler Check.
-$!
-$ ENDIF
-$!
-$! Check To See If We Have A Option For P4.
-$!
-$ IF (P4.EQS."")
-$ THEN
-$!
-$! Find out what socket library we have available
-$!
-$ IF F$PARSE("SOCKETSHR:") .NES. ""
-$ THEN
-$!
-$! We have SOCKETSHR, and it is my opinion that it's the best to use.
-$!
-$ P4 = "SOCKETSHR"
-$!
-$! Tell the user
-$!
-$ WRITE SYS$OUTPUT "Using SOCKETSHR for TCP/IP"
-$!
-$! Else, let's look for something else
-$!
-$ ELSE
-$!
-$! Like UCX (the reason to do this before Multinet is that the UCX
-$! emulation is easier to use...)
-$!
-$ IF F$TRNLNM("UCX$IPC_SHR") .NES. "" -
- .OR. F$PARSE("SYS$SHARE:UCX$IPC_SHR.EXE") .NES. "" -
- .OR. F$PARSE("SYS$LIBRARY:UCX$IPC.OLB") .NES. ""
-$ THEN
-$!
-$! Last resort: a UCX or UCX-compatible library
-$!
-$ P4 = "UCX"
-$!
-$! Tell the user
-$!
-$ WRITE SYS$OUTPUT "Using UCX or an emulation thereof for TCP/IP"
-$!
-$! That was all...
-$!
-$ ENDIF
-$ ENDIF
-$ ENDIF
-$!
-$! Set Up Initial CC Definitions, Possibly With User Ones
-$!
-$ CCDEFS = "TCPIP_TYPE_''P4',DSO_VMS"
-$ IF F$TYPE(USER_CCDEFS) .NES. "" THEN CCDEFS = CCDEFS + "," + USER_CCDEFS
-$ CCEXTRAFLAGS = ""
-$ IF F$TYPE(USER_CCFLAGS) .NES. "" THEN CCEXTRAFLAGS = USER_CCFLAGS
-$ CCDISABLEWARNINGS = "LONGLONGTYPE,LONGLONGSUFX,FOUNDCR"
-$ IF F$TYPE(USER_CCDISABLEWARNINGS) .NES. "" THEN -
- CCDISABLEWARNINGS = CCDISABLEWARNINGS + "," + USER_CCDISABLEWARNINGS
-$!
-$! Check To See If The User Entered A Valid Paramter.
-$!
-$ IF (P3.EQS."VAXC").OR.(P3.EQS."DECC").OR.(P3.EQS."GNUC")
-$ THEN
-$!
-$! Check To See If The User Wanted DECC.
-$!
-$ IF (P3.EQS."DECC")
-$ THEN
-$!
-$! Looks Like DECC, Set To Use DECC.
-$!
-$ COMPILER = "DECC"
-$!
-$! Tell The User We Are Using DECC.
-$!
-$ WRITE SYS$OUTPUT "Using DECC 'C' Compiler."
-$!
-$! Use DECC...
-$!
-$ CC = "CC"
-$ IF ARCH.EQS."VAX" .AND. F$TRNLNM("DECC$CC_DEFAULT").NES."/DECC" -
- THEN CC = "CC/DECC"
-$ CC = CC + "/''CC_OPTIMIZE'/''DEBUGGER'/STANDARD=ANSI89" + -
- "/NOLIST/PREFIX=ALL" + -
- "/INCLUDE=(SYS$DISK:[._''ARCH'],SYS$DISK:[],SYS$DISK:[-],SYS$DISK:[.ENGINE.VENDOR_DEFNS],SYS$DISK:[.EVP],SYS$DISK:[.ASN1])" + -
- CCEXTRAFLAGS
-$!
-$! Define The Linker Options File Name.
-$!
-$ OPT_FILE = "''EXE_DIR'VAX_DECC_OPTIONS.OPT"
-$!
-$! End DECC Check.
-$!
-$ ENDIF
-$!
-$! Check To See If We Are To Use VAXC.
-$!
-$ IF (P3.EQS."VAXC")
-$ THEN
-$!
-$! Looks Like VAXC, Set To Use VAXC.
-$!
-$ COMPILER = "VAXC"
-$!
-$! Tell The User We Are Using VAX C.
-$!
-$ WRITE SYS$OUTPUT "Using VAXC 'C' Compiler."
-$!
-$! Compile Using VAXC.
-$!
-$ CC = "CC"
-$ IF ARCH.NES."VAX"
-$ THEN
-$ WRITE SYS$OUTPUT "There is no VAX C on ''ARCH'!"
-$ EXIT
-$ ENDIF
-$ IF F$TRNLNM("DECC$CC_DEFAULT").EQS."/DECC" THEN CC = "CC/VAXC"
-$ CC = CC + "/''CC_OPTIMIZE'/''DEBUGGER'/NOLIST" + -
- "/INCLUDE=(SYS$DISK:[._''ARCH'],SYS$DISK:[],SYS$DISK:[-],SYS$DISK:[.ENGINE.VENDOR_DEFNS],SYS$DISK:[.EVP],SYS$DISK:[.ASN1])" + -
- CCEXTRAFLAGS
-$ CCDEFS = """VAXC""," + CCDEFS
-$!
-$! Define <sys> As SYS$COMMON:[SYSLIB]
-$!
-$ DEFINE/NOLOG SYS SYS$COMMON:[SYSLIB]
-$!
-$! Define The Linker Options File Name.
-$!
-$ OPT_FILE = "''EXE_DIR'VAX_VAXC_OPTIONS.OPT"
-$!
-$! End VAXC Check
-$!
-$ ENDIF
-$!
-$! Check To See If We Are To Use GNU C.
-$!
-$ IF (P3.EQS."GNUC")
-$ THEN
-$!
-$! Looks Like GNUC, Set To Use GNUC.
-$!
-$ COMPILER = "GNUC"
-$!
-$! Tell The User We Are Using GNUC.
-$!
-$ WRITE SYS$OUTPUT "Using GNU 'C' Compiler."
-$!
-$! Use GNU C...
-$!
-$ CC = "GCC/NOCASE_HACK/''GCC_OPTIMIZE'/''DEBUGGER'/NOLIST" + -
- "/INCLUDE=(SYS$DISK:[._''ARCH'],SYS$DISK:[],SYS$DISK:[-],SYS$DISK:[.ENGINE.VENDOR_DEFNS],SYS$DISK:[.EVP],SYS$DISK:[.ASN1])" + -
- CCEXTRAFLAGS
-$!
-$! Define The Linker Options File Name.
-$!
-$ OPT_FILE = "''EXE_DIR'VAX_GNUC_OPTIONS.OPT"
-$!
-$! End The GNU C Check.
-$!
-$ ENDIF
-$!
-$! Set up default defines
-$!
-$ CCDEFS = """FLAT_INC=1""," + CCDEFS
-$!
-$! Finish up the definition of CC.
-$!
-$ IF COMPILER .EQS. "DECC"
-$ THEN
-$ IF CCDISABLEWARNINGS .EQS. ""
-$ THEN
-$ CC4DISABLEWARNINGS = "DOLLARID"
-$ CC6DISABLEWARNINGS = "MIXLINKAGE"
-$ ELSE
-$ CC4DISABLEWARNINGS = CCDISABLEWARNINGS + ",DOLLARID"
-$ CC6DISABLEWARNINGS = CCDISABLEWARNINGS + ",MIXLINKAGE"
-$ CCDISABLEWARNINGS = "/WARNING=(DISABLE=(" + CCDISABLEWARNINGS + "))"
-$ ENDIF
-$ CC4DISABLEWARNINGS = "/WARNING=(DISABLE=(" + CC4DISABLEWARNINGS + "))"
-$ CC6DISABLEWARNINGS = "/WARNING=(DISABLE=(" + CC6DISABLEWARNINGS + "))"
-$ ELSE
-$ CCDISABLEWARNINGS = ""
-$ CC4DISABLEWARNINGS = ""
-$ CC6DISABLEWARNINGS = ""
-$ ENDIF
-$ CC3 = CC + "/DEFINE=(" + CCDEFS + ISSEVEN + ")" + CCDISABLEWARNINGS
-$ CC = CC + "/DEFINE=(" + CCDEFS + ")" + CCDISABLEWARNINGS
-$ IF ARCH .EQS. "VAX" .AND. COMPILER .EQS. "DECC" .AND. P2 .NES. "DEBUG"
-$ THEN
-$ CC5 = CC + "/OPTIMIZE=NODISJOINT"
-$ ELSE
-$ CC5 = CC + "/NOOPTIMIZE"
-$ ENDIF
-$ CC4 = CC - CCDISABLEWARNINGS + CC4DISABLEWARNINGS
-$ CC6 = CC - CCDISABLEWARNINGS + CC6DISABLEWARNINGS
-$!
-$! Show user the result
-$!
-$ WRITE/SYMBOL SYS$OUTPUT "Main C Compiling Command: ",CC
-$!
-$! Else The User Entered An Invalid Argument.
-$!
-$ ELSE
-$!
-$! Tell The User We Don't Know What They Want.
-$!
-$ WRITE SYS$OUTPUT ""
-$ WRITE SYS$OUTPUT "The Option ",P3," Is Invalid. The Valid Options Are:"
-$ WRITE SYS$OUTPUT ""
-$ WRITE SYS$OUTPUT " VAXC : To Compile With VAX C."
-$ WRITE SYS$OUTPUT " DECC : To Compile With DEC C."
-$ WRITE SYS$OUTPUT " GNUC : To Compile With GNU C."
-$ WRITE SYS$OUTPUT ""
-$!
-$! Time To EXIT.
-$!
-$ EXIT
-$!
-$! End The Valid Argument Check.
-$!
-$ ENDIF
-$!
-$! Build a MACRO command for the architecture at hand
-$!
-$ IF ARCH .EQS. "VAX" THEN MACRO = "MACRO/''DEBUGGER'"
-$ IF ARCH .NES. "VAX" THEN MACRO = "MACRO/MIGRATION/''DEBUGGER'/''MACRO_OPTIMIZE'"
-$!
-$! Show user the result
-$!
-$ WRITE/SYMBOL SYS$OUTPUT "Main MACRO Compiling Command: ",MACRO
-$!
-$! Time to check the contents, and to make sure we get the correct library.
-$!
-$ IF P4.EQS."SOCKETSHR" .OR. P4.EQS."MULTINET" .OR. P4.EQS."UCX" -
- .OR. P4.EQS."TCPIP" .OR. P4.EQS."NONE"
-$ THEN
-$!
-$! Check to see if SOCKETSHR was chosen
-$!
-$ IF P4.EQS."SOCKETSHR"
-$ THEN
-$!
-$! Set the library to use SOCKETSHR
-$!
-$ TCPIP_LIB = "SYS$DISK:[-.VMS]SOCKETSHR_SHR.OPT/OPT"
-$!
-$! Done with SOCKETSHR
-$!
-$ ENDIF
-$!
-$! Check to see if MULTINET was chosen
-$!
-$ IF P4.EQS."MULTINET"
-$ THEN
-$!
-$! Set the library to use UCX emulation.
-$!
-$ P4 = "UCX"
-$!
-$! Done with MULTINET
-$!
-$ ENDIF
-$!
-$! Check to see if UCX was chosen
-$!
-$ IF P4.EQS."UCX"
-$ THEN
-$!
-$! Set the library to use UCX.
-$!
-$ TCPIP_LIB = "SYS$DISK:[-.VMS]UCX_SHR_DECC.OPT/OPT"
-$ IF F$TRNLNM("UCX$IPC_SHR") .NES. ""
-$ THEN
-$ TCPIP_LIB = "SYS$DISK:[-.VMS]UCX_SHR_DECC_LOG.OPT/OPT"
-$ ELSE
-$ IF COMPILER .NES. "DECC" .AND. ARCH .EQS. "VAX" THEN -
- TCPIP_LIB = "SYS$DISK:[-.VMS]UCX_SHR_VAXC.OPT/OPT"
-$ ENDIF
-$!
-$! Done with UCX
-$!
-$ ENDIF
-$!
-$! Check to see if TCPIP was chosen
-$!
-$ IF P4.EQS."TCPIP"
-$ THEN
-$!
-$! Set the library to use TCPIP (post UCX).
-$!
-$ TCPIP_LIB = "SYS$DISK:[-.VMS]TCPIP_SHR_DECC.OPT/OPT"
-$!
-$! Done with TCPIP
-$!
-$ ENDIF
-$!
-$! Check to see if NONE was chosen
-$!
-$ IF P4.EQS."NONE"
-$ THEN
-$!
-$! Do not use a TCPIP library.
-$!
-$ TCPIP_LIB = ""
-$!
-$! Done with TCPIP
-$!
-$ ENDIF
-$!
-$! Print info
-$!
-$ WRITE SYS$OUTPUT "TCP/IP library spec: ", TCPIP_LIB
-$!
-$! Else The User Entered An Invalid Argument.
-$!
-$ ELSE
-$!
-$! Tell The User We Don't Know What They Want.
-$!
-$ WRITE SYS$OUTPUT ""
-$ WRITE SYS$OUTPUT "The Option ",P4," Is Invalid. The Valid Options Are:"
-$ WRITE SYS$OUTPUT ""
-$ WRITE SYS$OUTPUT " SOCKETSHR : To link with SOCKETSHR TCP/IP library."
-$ WRITE SYS$OUTPUT " UCX : To link with UCX TCP/IP library."
-$ WRITE SYS$OUTPUT " TCPIP : To link with TCPIP (post UCX) TCP/IP library."
-$ WRITE SYS$OUTPUT ""
-$!
-$! Time To EXIT.
-$!
-$ EXIT
-$!
-$! Done with TCP/IP libraries
-$!
-$ ENDIF
-$!
-$! Check if the user wanted to compile just a subset of all the encryption
-$! methods.
-$!
-$ IF P6 .NES. ""
-$ THEN
-$ ENCRYPT_TYPES = P6
-$ ENDIF
-$!
-$! Time To RETURN...
-$!
-$ RETURN
-$!
-$ INITIALISE:
-$!
-$! Save old value of the logical name OPENSSL
-$!
-$ __SAVE_OPENSSL = F$TRNLNM("OPENSSL","LNM$PROCESS_TABLE")
-$!
-$! Save directory information
-$!
-$ __HERE = F$PARSE(F$PARSE("A.;",F$ENVIRONMENT("PROCEDURE"))-"A.;","[]A.;") - "A.;"
-$ __HERE = F$EDIT(__HERE,"UPCASE")
-$ __TOP = __HERE - "CRYPTO]"
-$ __INCLUDE = __TOP + "INCLUDE.OPENSSL]"
-$!
-$! Set up the logical name OPENSSL to point at the include directory
-$!
-$ DEFINE OPENSSL/NOLOG '__INCLUDE'
-$!
-$! Done
-$!
-$ RETURN
-$!
-$ CLEANUP:
-$!
-$! Restore the logical name OPENSSL if it had a value
-$!
-$ IF __SAVE_OPENSSL .EQS. ""
-$ THEN
-$ DEASSIGN OPENSSL
-$ ELSE
-$ DEFINE/NOLOG OPENSSL '__SAVE_OPENSSL'
-$ ENDIF
-$!
-$! Done
-$!
-$ RETURN
+$!
+$! CRYPTO-LIB.COM
+$! Written By: Robert Byer
+$! Vice-President
+$! A-Com Computing, Inc.
+$! byer@mail.all-net.net
+$!
+$! Changes by Richard Levitte <richard@levitte.org>
+$! Zoltan Arpadffy <arpadffy@polarhome.com>
+$!
+$! This command files compiles and creates the "[.xxx.EXE.CRYPTO]LIBCRYPTO.OLB"
+$! library for OpenSSL. The "xxx" denotes the machine architecture, ALPHA,
+$! IA64 or VAX.
+$!
+$! It was re-written so it would try to determine what "C" compiler to use
+$! or you can specify which "C" compiler to use.
+$!
+$! Specify the following as P1 to build just that part or ALL to just
+$! build everything.
+$!
+$! LIBRARY To just compile the [.xxx.EXE.CRYPTO]LIBCRYPTO.OLB Library.
+$! APPS To just compile the [.xxx.EXE.CRYPTO]*.EXE
+$! ALL To do both LIBRARY and APPS
+$!
+$! Specify DEBUG or NODEBUG as P2 to compile with or without debugger
+$! information.
+$!
+$! Specify which compiler at P3 to try to compile under.
+$!
+$! VAXC For VAX C.
+$! DECC For DEC C.
+$! GNUC For GNU C.
+$!
+$! If you don't specify a compiler, it will try to determine which
+$! "C" compiler to use.
+$!
+$! P4, if defined, sets a TCP/IP library to use, through one of the following
+$! keywords:
+$!
+$! UCX For UCX
+$! TCPIP For TCPIP (post UCX)
+$! SOCKETSHR For SOCKETSHR+NETLIB
+$!
+$! P5, if defined, sets a compiler thread NOT needed on OpenVMS 7.1 (and up)
+$!
+$! P6, if defined, sets a choice of crypto methods to compile.
+$! WARNING: this should only be done to recompile some part of an already
+$! fully compiled library.
+$!
+$! For 64 bit architectures (Alpha and IA64), specify the pointer size as P7.
+$! For 32 bit architectures (VAX), P7 is ignored.
+$! Currently supported values are:
+$!
+$! 32 To ge a library compiled with /POINTER_SIZE=32
+$! 64 To ge a library compiled with /POINTER_SIZE=64
+$!
+$!
+$! Define A TCP/IP Library That We Will Need To Link To.
+$! (That Is, If We Need To Link To One.)
+$!
+$ TCPIP_LIB = ""
+$!
+$! Check Which Architecture We Are Using.
+$!
+$ IF (F$GETSYI("CPU").LT.128)
+$ THEN
+$!
+$! The Architecture Is VAX
+$!
+$ ARCH = "VAX"
+$!
+$! Else...
+$!
+$ ELSE
+$!
+$! The Architecture Is Alpha, IA64 or whatever comes in the future.
+$!
+$ ARCH = F$EDIT( F$GETSYI( "ARCH_NAME"), "UPCASE")
+$ IF (ARCH .EQS. "") THEN ARCH = "UNK"
+$!
+$! End The Architecture Check.
+$!
+$ ENDIF
+$!
+$! Define The Different Encryption Types.
+$! NOTE: Some might think this list ugly. However, it's made this way to
+$! reflect the SDIRS variable in [-]Makefile.org as closely as possible,
+$! thereby making it fairly easy to verify that the lists are the same.
+$!
+$ ET_WHIRLPOOL = "WHRLPOOL"
+$ IF ARCH .EQS. "VAX" THEN ET_WHIRLPOOL = ""
+$ ENCRYPT_TYPES = "Basic,"+ -
+ "OBJECTS,"+ -
+ "MD2,MD4,MD5,SHA,MDC2,HMAC,RIPEMD,"+ET_WHIRLPOOL+","+ -
+ "DES,AES,RC2,RC4,RC5,IDEA,BF,CAST,CAMELLIA,SEED,MODES,"+ -
+ "BN,EC,RSA,DSA,ECDSA,DH,ECDH,DSO,ENGINE,"+ -
+ "BUFFER,BIO,STACK,LHASH,RAND,ERR,"+ -
+ "EVP,EVP_2,EVP_3,ASN1,ASN1_2,PEM,X509,X509V3,"+ -
+ "CONF,TXT_DB,PKCS7,PKCS12,COMP,OCSP,UI,KRB5,"+ -
+ "STORE,CMS,PQUEUE,TS,JPAKE"
+$! Define The OBJ Directory.
+$!
+$ OBJ_DIR := SYS$DISK:[-.'ARCH'.OBJ.CRYPTO]
+$!
+$! Define The EXE Directory.
+$!
+$ EXE_DIR := SYS$DISK:[-.'ARCH'.EXE.CRYPTO]
+$!
+$! Check To Make Sure We Have Valid Command Line Parameters.
+$!
+$ GOSUB CHECK_OPTIONS
+$!
+$! Initialise logical names and such
+$!
+$ GOSUB INITIALISE
+$!
+$! Tell The User What Kind of Machine We Run On.
+$!
+$ WRITE SYS$OUTPUT "Compiling On A ",ARCH," Machine."
+$!
+$!
+$! Check To See If The Architecture Specific OBJ Directory Exists.
+$!
+$ IF (F$PARSE(OBJ_DIR).EQS."")
+$ THEN
+$!
+$! It Dosen't Exist, So Create It.
+$!
+$ CREATE/DIR 'OBJ_DIR'
+$!
+$! End The Architecture Specific OBJ Directory Check.
+$!
+$ ENDIF
+$!
+$! Check To See If The Architecture Specific Directory Exists.
+$!
+$ IF (F$PARSE(EXE_DIR).EQS."")
+$ THEN
+$!
+$! It Dosen't Exist, So Create It.
+$!
+$ CREATE/DIRECTORY 'EXE_DIR'
+$!
+$! End The Architecture Specific Directory Check.
+$!
+$ ENDIF
+$!
+$! Define The Library Name.
+$!
+$ LIB_NAME := 'EXE_DIR'LIBCRYPTO'LIB32'.OLB
+$!
+$! Define The CRYPTO-LIB We Are To Use.
+$!
+$ CRYPTO_LIB := 'EXE_DIR'LIBCRYPTO'LIB32'.OLB
+$!
+$! Check To See If We Already Have A "[.xxx.EXE.CRYPTO]LIBCRYPTO.OLB" Library...
+$!
+$ IF (F$SEARCH(LIB_NAME).EQS."")
+$ THEN
+$!
+$! Guess Not, Create The Library.
+$!
+$ LIBRARY/CREATE/OBJECT 'LIB_NAME'
+$!
+$! End The Library Check.
+$!
+$ ENDIF
+$!
+$! Build our options file for the application
+$!
+$ GOSUB CHECK_OPT_FILE
+$!
+$! Define The Different Encryption "library" Strings.
+$!
+$ APPS_DES = "DES/DES,CBC3_ENC"
+$ APPS_PKCS7 = "ENC/ENC;DEC/DEC;SIGN/SIGN;VERIFY/VERIFY,EXAMPLE"
+$
+$ LIB_ = "cryptlib,mem,mem_clr,mem_dbg,cversion,ex_data,cpt_err,ebcdic,uid,o_time,o_str,o_dir"
+$ LIB_MD2 = "md2_dgst,md2_one"
+$ LIB_MD4 = "md4_dgst,md4_one"
+$ LIB_MD5 = "md5_dgst,md5_one"
+$ LIB_SHA = "sha_dgst,sha1dgst,sha_one,sha1_one,sha256,sha512"
+$ LIB_MDC2 = "mdc2dgst,mdc2_one"
+$ LIB_HMAC = "hmac,hm_ameth,hm_pmeth"
+$ LIB_RIPEMD = "rmd_dgst,rmd_one"
+$ LIB_WHRLPOOL = "wp_dgst,wp_block"
+$ LIB_DES = "set_key,ecb_enc,cbc_enc,"+ -
+ "ecb3_enc,cfb64enc,cfb64ede,cfb_enc,ofb64ede,"+ -
+ "enc_read,enc_writ,ofb64enc,"+ -
+ "ofb_enc,str2key,pcbc_enc,qud_cksm,rand_key,"+ -
+ "des_enc,fcrypt_b,"+ -
+ "fcrypt,xcbc_enc,rpc_enc,cbc_cksm,"+ -
+ "ede_cbcm_enc,des_old,des_old2,read2pwd"
+$ LIB_RC2 = "rc2_ecb,rc2_skey,rc2_cbc,rc2cfb64,rc2ofb64"
+$ LIB_RC4 = "rc4_skey,rc4_enc"
+$ LIB_RC5 = "rc5_skey,rc5_ecb,rc5_enc,rc5cfb64,rc5ofb64"
+$ LIB_IDEA = "i_cbc,i_cfb64,i_ofb64,i_ecb,i_skey"
+$ LIB_BF = "bf_skey,bf_ecb,bf_enc,bf_cfb64,bf_ofb64"
+$ LIB_CAST = "c_skey,c_ecb,c_enc,c_cfb64,c_ofb64"
+$ LIB_CAMELLIA = "camellia,cmll_misc,cmll_ecb,cmll_cbc,cmll_ofb,"+ -
+ "cmll_cfb,cmll_ctr"
+$ LIB_SEED = "seed,seed_ecb,seed_cbc,seed_cfb,seed_ofb"
+$ LIB_MODES = "cbc128,ctr128,cfb128,ofb128,cts128"
+$ LIB_BN_ASM = "[.asm]vms.mar,vms-helper"
+$ IF F$TRNLNM("OPENSSL_NO_ASM") .OR. ARCH .NES. "VAX" THEN -
+ LIB_BN_ASM = "bn_asm"
+$ LIB_BN = "bn_add,bn_div,bn_exp,bn_lib,bn_ctx,bn_mul,bn_mod,"+ -
+ "bn_print,bn_rand,bn_shift,bn_word,bn_blind,"+ -
+ "bn_kron,bn_sqrt,bn_gcd,bn_prime,bn_err,bn_sqr,"+LIB_BN_ASM+","+ -
+ "bn_recp,bn_mont,bn_mpi,bn_exp2,bn_gf2m,bn_nist,"+ -
+ "bn_depr,bn_const"
+$ LIB_EC = "ec_lib,ecp_smpl,ecp_mont,ecp_nist,ec_cvt,ec_mult,"+ -
+ "ec_err,ec_curve,ec_check,ec_print,ec_asn1,ec_key,"+ -
+ "ec2_smpl,ec2_mult,ec_ameth,ec_pmeth,eck_prn"
+$ LIB_RSA = "rsa_eay,rsa_gen,rsa_lib,rsa_sign,rsa_saos,rsa_err,"+ -
+ "rsa_pk1,rsa_ssl,rsa_none,rsa_oaep,rsa_chk,rsa_null,"+ -
+ "rsa_pss,rsa_x931,rsa_asn1,rsa_depr,rsa_ameth,rsa_prn,"+ -
+ "rsa_pmeth"
+$ LIB_DSA = "dsa_gen,dsa_key,dsa_lib,dsa_asn1,dsa_vrf,dsa_sign,"+ -
+ "dsa_err,dsa_ossl,dsa_depr,dsa_ameth,dsa_pmeth,dsa_prn"
+$ LIB_ECDSA = "ecs_lib,ecs_asn1,ecs_ossl,ecs_sign,ecs_vrf,ecs_err"
+$ LIB_DH = "dh_asn1,dh_gen,dh_key,dh_lib,dh_check,dh_err,dh_depr,"+ -
+ "dh_ameth,dh_pmeth,dh_prn"
+$ LIB_ECDH = "ech_lib,ech_ossl,ech_key,ech_err"
+$ LIB_DSO = "dso_dl,dso_dlfcn,dso_err,dso_lib,dso_null,"+ -
+ "dso_openssl,dso_win32,dso_vms,dso_beos"
+$ LIB_ENGINE = "eng_err,eng_lib,eng_list,eng_init,eng_ctrl,"+ -
+ "eng_table,eng_pkey,eng_fat,eng_all,"+ -
+ "tb_rsa,tb_dsa,tb_ecdsa,tb_dh,tb_ecdh,tb_rand,tb_store,"+ -
+ "tb_cipher,tb_digest,tb_pkmeth,tb_asnmth,"+ -
+ "eng_openssl,eng_dyn,eng_cnf,eng_cryptodev"
+$ LIB_AES = "aes_core,aes_misc,aes_ecb,aes_cbc,aes_cfb,aes_ofb,aes_ctr,"+ -
+ "aes_ige,aes_wrap"
+$ LIB_BUFFER = "buffer,buf_err"
+$ LIB_BIO = "bio_lib,bio_cb,bio_err,"+ -
+ "bss_mem,bss_null,bss_fd,"+ -
+ "bss_file,bss_sock,bss_conn,"+ -
+ "bf_null,bf_buff,b_print,b_dump,"+ -
+ "b_sock,bss_acpt,bf_nbio,bss_rtcp,bss_bio,bss_log,"+ -
+ "bss_dgram,"+ -
+ "bf_lbuf"
+$ LIB_STACK = "stack"
+$ LIB_LHASH = "lhash,lh_stats"
+$ LIB_RAND = "md_rand,randfile,rand_lib,rand_err,rand_egd,"+ -
+ "rand_vms"
+$ LIB_ERR = "err,err_all,err_prn"
+$ LIB_OBJECTS = "o_names,obj_dat,obj_lib,obj_err,obj_xref"
+$ LIB_EVP = "encode,digest,evp_enc,evp_key,evp_acnf,"+ -
+ "e_des,e_bf,e_idea,e_des3,e_camellia,"+ -
+ "e_rc4,e_aes,names,e_seed,"+ -
+ "e_xcbc_d,e_rc2,e_cast,e_rc5"
+$ LIB_EVP_2 = "m_null,m_md2,m_md4,m_md5,m_sha,m_sha1,m_wp," + -
+ "m_dss,m_dss1,m_mdc2,m_ripemd,m_ecdsa,"+ -
+ "p_open,p_seal,p_sign,p_verify,p_lib,p_enc,p_dec,"+ -
+ "bio_md,bio_b64,bio_enc,evp_err,e_null,"+ -
+ "c_all,c_allc,c_alld,evp_lib,bio_ok,"+-
+ "evp_pkey,evp_pbe,p5_crpt,p5_crpt2"
+$ LIB_EVP_3 = "e_old,pmeth_lib,pmeth_fn,pmeth_gn,m_sigver"
+$ LIB_ASN1 = "a_object,a_bitstr,a_utctm,a_gentm,a_time,a_int,a_octet,"+ -
+ "a_print,a_type,a_set,a_dup,a_d2i_fp,a_i2d_fp,"+ -
+ "a_enum,a_utf8,a_sign,a_digest,a_verify,a_mbstr,a_strex,"+ -
+ "x_algor,x_val,x_pubkey,x_sig,x_req,x_attrib,x_bignum,"+ -
+ "x_long,x_name,x_x509,x_x509a,x_crl,x_info,x_spki,nsseq,"+ -
+ "x_nx509,d2i_pu,d2i_pr,i2d_pu,i2d_pr"
+$ LIB_ASN1_2 = "t_req,t_x509,t_x509a,t_crl,t_pkey,t_spki,t_bitst,"+ -
+ "tasn_new,tasn_fre,tasn_enc,tasn_dec,tasn_utl,tasn_typ,"+ -
+ "tasn_prn,ameth_lib,"+ -
+ "f_int,f_string,n_pkey,"+ -
+ "f_enum,x_pkey,a_bool,x_exten,bio_asn1,bio_ndef,asn_mime,"+ -
+ "asn1_gen,asn1_par,asn1_lib,asn1_err,a_bytes,a_strnid,"+ -
+ "evp_asn1,asn_pack,p5_pbe,p5_pbev2,p8_pkey,asn_moid"
+$ LIB_PEM = "pem_sign,pem_seal,pem_info,pem_lib,pem_all,pem_err,"+ -
+ "pem_x509,pem_xaux,pem_oth,pem_pk8,pem_pkey,pvkfmt"
+$ LIB_X509 = "x509_def,x509_d2,x509_r2x,x509_cmp,"+ -
+ "x509_obj,x509_req,x509spki,x509_vfy,"+ -
+ "x509_set,x509cset,x509rset,x509_err,"+ -
+ "x509name,x509_v3,x509_ext,x509_att,"+ -
+ "x509type,x509_lu,x_all,x509_txt,"+ -
+ "x509_trs,by_file,by_dir,x509_vpm"
+$ LIB_X509V3 = "v3_bcons,v3_bitst,v3_conf,v3_extku,v3_ia5,v3_lib,"+ -
+ "v3_prn,v3_utl,v3err,v3_genn,v3_alt,v3_skey,v3_akey,v3_pku,"+ -
+ "v3_int,v3_enum,v3_sxnet,v3_cpols,v3_crld,v3_purp,v3_info,"+ -
+ "v3_ocsp,v3_akeya,v3_pmaps,v3_pcons,v3_ncons,v3_pcia,v3_pci,"+ -
+ "pcy_cache,pcy_node,pcy_data,pcy_map,pcy_tree,pcy_lib,"+ -
+ "v3_asid,v3_addr"
+$ LIB_CONF = "conf_err,conf_lib,conf_api,conf_def,conf_mod,conf_mall,conf_sap"
+$ LIB_TXT_DB = "txt_db"
+$ LIB_PKCS7 = "pk7_asn1,pk7_lib,pkcs7err,pk7_doit,pk7_smime,pk7_attr,"+ -
+ "pk7_mime,bio_pk7"
+$ LIB_PKCS12 = "p12_add,p12_asn,p12_attr,p12_crpt,p12_crt,p12_decr,"+ -
+ "p12_init,p12_key,p12_kiss,p12_mutl,"+ -
+ "p12_utl,p12_npas,pk12err,p12_p8d,p12_p8e"
+$ LIB_COMP = "comp_lib,comp_err,"+ -
+ "c_rle,c_zlib"
+$ LIB_OCSP = "ocsp_asn,ocsp_ext,ocsp_ht,ocsp_lib,ocsp_cl,"+ -
+ "ocsp_srv,ocsp_prn,ocsp_vfy,ocsp_err"
+$ LIB_UI_COMPAT = ",ui_compat"
+$ LIB_UI = "ui_err,ui_lib,ui_openssl,ui_util"+LIB_UI_COMPAT
+$ LIB_KRB5 = "krb5_asn"
+$ LIB_STORE = "str_err,str_lib,str_meth,str_mem"
+$ LIB_CMS = "cms_lib,cms_asn1,cms_att,cms_io,cms_smime,cms_err,"+ -
+ "cms_sd,cms_dd,cms_cd,cms_env,cms_enc,cms_ess"
+$ LIB_PQUEUE = "pqueue"
+$ LIB_TS = "ts_err,ts_req_utils,ts_req_print,ts_rsp_utils,ts_rsp_print,"+ -
+ "ts_rsp_sign,ts_rsp_verify,ts_verify_ctx,ts_lib,ts_conf,"+ -
+ "ts_asn1"
+$ LIB_JPAKE = "jpake,jpake_err"
+$!
+$! Setup exceptional compilations
+$!
+$ ! Add definitions for no threads on OpenVMS 7.1 and higher
+$ COMPILEWITH_CC3 = ",bss_rtcp,"
+$ ! Disable the DOLLARID warning
+$ COMPILEWITH_CC4 = ",a_utctm,bss_log,o_time,o_dir"
+$ ! Disable disjoint optimization
+$ COMPILEWITH_CC5 = ",md2_dgst,md4_dgst,md5_dgst,mdc2dgst," + -
+ "seed,sha_dgst,sha1dgst,rmd_dgst,bf_enc,"
+$ ! Disable the MIXLINKAGE warning
+$ COMPILEWITH_CC6 = ",enc_read,set_key,"
+$!
+$! Figure Out What Other Modules We Are To Build.
+$!
+$ BUILD_SET:
+$!
+$! Define A Module Counter.
+$!
+$ MODULE_COUNTER = 0
+$!
+$! Top Of The Loop.
+$!
+$ MODULE_NEXT:
+$!
+$! Extract The Module Name From The Encryption List.
+$!
+$ MODULE_NAME = F$ELEMENT(MODULE_COUNTER,",",ENCRYPT_TYPES)
+$ IF MODULE_NAME.EQS."Basic" THEN MODULE_NAME = ""
+$ MODULE_NAME1 = MODULE_NAME
+$!
+$! Check To See If We Are At The End Of The Module List.
+$!
+$ IF (MODULE_NAME.EQS.",")
+$ THEN
+$!
+$! We Are At The End Of The Module List, Go To MODULE_DONE.
+$!
+$ GOTO MODULE_DONE
+$!
+$! End The Module List Check.
+$!
+$ ENDIF
+$!
+$! Increment The Moudle Counter.
+$!
+$ MODULE_COUNTER = MODULE_COUNTER + 1
+$!
+$! Create The Library and Apps Module Names.
+$!
+$ LIB_MODULE = "LIB_" + MODULE_NAME
+$ APPS_MODULE = "APPS_" + MODULE_NAME
+$ IF (F$EXTRACT(0,5,MODULE_NAME).EQS."ASN1_")
+$ THEN
+$ MODULE_NAME = "ASN1"
+$ ENDIF
+$ IF (F$EXTRACT(0,4,MODULE_NAME).EQS."EVP_")
+$ THEN
+$ MODULE_NAME = "EVP"
+$ ENDIF
+$!
+$! Set state (can be LIB and APPS)
+$!
+$ STATE = "LIB"
+$ IF BUILDALL .EQS. "APPS" THEN STATE = "APPS"
+$!
+$! Check if the library module name actually is defined
+$!
+$ IF F$TYPE('LIB_MODULE') .EQS. ""
+$ THEN
+$ WRITE SYS$ERROR ""
+$ WRITE SYS$ERROR "The module ",MODULE_NAME1," does not exist. Continuing..."
+$ WRITE SYS$ERROR ""
+$ GOTO MODULE_NEXT
+$ ENDIF
+$!
+$! Top Of The Module Loop.
+$!
+$ MODULE_AGAIN:
+$!
+$! Tell The User What Module We Are Building.
+$!
+$ IF (MODULE_NAME1.NES."")
+$ THEN
+$ IF STATE .EQS. "LIB"
+$ THEN
+$ WRITE SYS$OUTPUT "Compiling The ",MODULE_NAME1," Library Files. (",BUILDALL,",",STATE,")"
+$ ELSE IF F$TYPE('APPS_MODULE') .NES. ""
+$ THEN
+$ WRITE SYS$OUTPUT "Compiling The ",MODULE_NAME1," Applications. (",BUILDALL,",",STATE,")"
+$ ENDIF
+$ ENDIF
+$ ENDIF
+$!
+$! Define A File Counter And Set It To "0".
+$!
+$ FILE_COUNTER = 0
+$ APPLICATION = ""
+$ APPLICATION_COUNTER = 0
+$!
+$! Top Of The File Loop.
+$!
+$ NEXT_FILE:
+$!
+$! Look in the LIB_MODULE is we're in state LIB
+$!
+$ IF STATE .EQS. "LIB"
+$ THEN
+$!
+$! O.K, Extract The File Name From The File List.
+$!
+$ FILE_NAME = F$ELEMENT(FILE_COUNTER,",",'LIB_MODULE')
+$!
+$! else
+$!
+$ ELSE
+$ FILE_NAME = ","
+$!
+$ IF F$TYPE('APPS_MODULE') .NES. ""
+$ THEN
+$!
+$! Extract The File Name From The File List.
+$! This part is a bit more complicated.
+$!
+$ IF APPLICATION .EQS. ""
+$ THEN
+$ APPLICATION = F$ELEMENT(APPLICATION_COUNTER,";",'APPS_MODULE')
+$ APPLICATION_COUNTER = APPLICATION_COUNTER + 1
+$ APPLICATION_OBJECTS = F$ELEMENT(1,"/",APPLICATION)
+$ APPLICATION = F$ELEMENT(0,"/",APPLICATION)
+$ FILE_COUNTER = 0
+$ ENDIF
+$
+$! WRITE SYS$OUTPUT "DEBUG: SHOW SYMBOL APPLICATION*"
+$! SHOW SYMBOL APPLICATION*
+$!
+$ IF APPLICATION .NES. ";"
+$ THEN
+$ FILE_NAME = F$ELEMENT(FILE_COUNTER,",",APPLICATION_OBJECTS)
+$ IF FILE_NAME .EQS. ","
+$ THEN
+$ APPLICATION = ""
+$ GOTO NEXT_FILE
+$ ENDIF
+$ ENDIF
+$ ENDIF
+$ ENDIF
+$!
+$! Check To See If We Are At The End Of The File List.
+$!
+$ IF (FILE_NAME.EQS.",")
+$ THEN
+$!
+$! We Are At The End Of The File List, Change State Or Goto FILE_DONE.
+$!
+$ IF STATE .EQS. "LIB" .AND. BUILDALL .NES. "LIBRARY"
+$ THEN
+$ STATE = "APPS"
+$ GOTO MODULE_AGAIN
+$ ELSE
+$ GOTO FILE_DONE
+$ ENDIF
+$!
+$! End The File List Check.
+$!
+$ ENDIF
+$!
+$! Increment The Counter.
+$!
+$ FILE_COUNTER = FILE_COUNTER + 1
+$!
+$! Create The Source File Name.
+$!
+$ TMP_FILE_NAME = F$ELEMENT(1,"]",FILE_NAME)
+$ IF TMP_FILE_NAME .EQS. "]" THEN TMP_FILE_NAME = FILE_NAME
+$ IF F$ELEMENT(0,".",TMP_FILE_NAME) .EQS. TMP_FILE_NAME THEN -
+ FILE_NAME = FILE_NAME + ".c"
+$ IF (MODULE_NAME.NES."")
+$ THEN
+$ SOURCE_FILE = "SYS$DISK:[." + MODULE_NAME+ "]" + FILE_NAME
+$ ELSE
+$ SOURCE_FILE = "SYS$DISK:[]" + FILE_NAME
+$ ENDIF
+$ SOURCE_FILE = SOURCE_FILE - "]["
+$!
+$! Create The Object File Name.
+$!
+$ OBJECT_FILE = OBJ_DIR + F$PARSE(FILE_NAME,,,"NAME","SYNTAX_ONLY") + ".OBJ"
+$ ON WARNING THEN GOTO NEXT_FILE
+$!
+$! Check To See If The File We Want To Compile Is Actually There.
+$!
+$ IF (F$SEARCH(SOURCE_FILE).EQS."")
+$ THEN
+$!
+$! Tell The User That The File Doesn't Exist.
+$!
+$ WRITE SYS$OUTPUT ""
+$ WRITE SYS$OUTPUT "The File ",SOURCE_FILE," Doesn't Exist."
+$ WRITE SYS$OUTPUT ""
+$!
+$! Exit The Build.
+$!
+$ GOTO EXIT
+$!
+$! End The File Exist Check.
+$!
+$ ENDIF
+$!
+$! Tell The User We Are Compiling The File.
+$!
+$ IF (MODULE_NAME.EQS."")
+$ THEN
+$ WRITE SYS$OUTPUT "Compiling The ",FILE_NAME," File. (",BUILDALL,",",STATE,")"
+$ ENDIF
+$ IF (MODULE_NAME.NES."")
+$ THEN
+$ WRITE SYS$OUTPUT " ",FILE_NAME,""
+$ ENDIF
+$!
+$! Compile The File.
+$!
+$ ON ERROR THEN GOTO NEXT_FILE
+$ FILE_NAME0 = F$ELEMENT(0,".",FILE_NAME)
+$ IF FILE_NAME - ".mar" .NES. FILE_NAME
+$ THEN
+$ MACRO/OBJECT='OBJECT_FILE' 'SOURCE_FILE'
+$ ELSE
+$ IF COMPILEWITH_CC3 - FILE_NAME0 .NES. COMPILEWITH_CC3
+$ THEN
+$ CC3/OBJECT='OBJECT_FILE' 'SOURCE_FILE'
+$ ELSE
+$ IF COMPILEWITH_CC4 - FILE_NAME0 .NES. COMPILEWITH_CC4
+$ THEN
+$ CC4/OBJECT='OBJECT_FILE' 'SOURCE_FILE'
+$ ELSE
+$ IF COMPILEWITH_CC5 - FILE_NAME0 .NES. COMPILEWITH_CC5
+$ THEN
+$ CC5/OBJECT='OBJECT_FILE' 'SOURCE_FILE'
+$ ELSE
+$ IF COMPILEWITH_CC6 - FILE_NAME0 .NES. COMPILEWITH_CC6
+$ THEN
+$ CC6/OBJECT='OBJECT_FILE' 'SOURCE_FILE'
+$ ELSE
+$ CC/OBJECT='OBJECT_FILE' 'SOURCE_FILE'
+$ ENDIF
+$ ENDIF
+$ ENDIF
+$ ENDIF
+$ ENDIF
+$ IF STATE .EQS. "LIB"
+$ THEN
+$!
+$! Add It To The Library.
+$!
+$ LIBRARY/REPLACE 'LIB_NAME' 'OBJECT_FILE'
+$!
+$! Time To Clean Up The Object File.
+$!
+$ DELETE 'OBJECT_FILE';*
+$ ENDIF
+$!
+$! Go Back And Do It Again.
+$!
+$ GOTO NEXT_FILE
+$!
+$! All Done With This Library Part.
+$!
+$ FILE_DONE:
+$!
+$! Time To Build Some Applications
+$!
+$ IF F$TYPE('APPS_MODULE') .NES. "" .AND. BUILDALL .NES. "LIBRARY"
+$ THEN
+$ APPLICATION_COUNTER = 0
+$ NEXT_APPLICATION:
+$ APPLICATION = F$ELEMENT(APPLICATION_COUNTER,";",'APPS_MODULE')
+$ IF APPLICATION .EQS. ";" THEN GOTO APPLICATION_DONE
+$
+$ APPLICATION_COUNTER = APPLICATION_COUNTER + 1
+$ APPLICATION_OBJECTS = F$ELEMENT(1,"/",APPLICATION)
+$ APPLICATION = F$ELEMENT(0,"/",APPLICATION)
+$
+$! WRITE SYS$OUTPUT "DEBUG: SHOW SYMBOL APPLICATION*"
+$! SHOW SYMBOL APPLICATION*
+$!
+$! Tell the user what happens
+$!
+$ WRITE SYS$OUTPUT " ",APPLICATION,".exe"
+$!
+$! Link The Program.
+$!
+$ ON ERROR THEN GOTO NEXT_APPLICATION
+$!
+$! Check To See If We Are To Link With A Specific TCP/IP Library.
+$!
+$ IF (TCPIP_LIB.NES."")
+$ THEN
+$!
+$! Link With A TCP/IP Library.
+$!
+$ LINK/'DEBUGGER'/'TRACEBACK'/EXE='EXE_DIR''APPLICATION'.EXE -
+ 'OBJ_DIR''APPLICATION_OBJECTS', -
+ 'CRYPTO_LIB'/LIBRARY, -
+ 'TCPIP_LIB','OPT_FILE'/OPTION
+$!
+$! Else...
+$!
+$ ELSE
+$!
+$! Don't Link With A TCP/IP Library.
+$!
+$ LINK/'DEBUGGER'/'TRACEBACK'/EXE='EXE_DIR''APPLICATION'.EXE -
+ 'OBJ_DIR''APPLICATION_OBJECTS',-
+ 'CRYPTO_LIB'/LIBRARY, -
+ 'OPT_FILE'/OPTION
+$!
+$! End The TCP/IP Library Check.
+$!
+$ ENDIF
+$ GOTO NEXT_APPLICATION
+$ APPLICATION_DONE:
+$ ENDIF
+$!
+$! Go Back And Get The Next Module.
+$!
+$ GOTO MODULE_NEXT
+$!
+$! All Done With This Module.
+$!
+$ MODULE_DONE:
+$!
+$! Tell The User That We Are All Done.
+$!
+$ WRITE SYS$OUTPUT "All Done..."
+$ EXIT:
+$ GOSUB CLEANUP
+$ EXIT
+$!
+$! Check For The Link Option FIle.
+$!
+$ CHECK_OPT_FILE:
+$!
+$! Check To See If We Need To Make A VAX C Option File.
+$!
+$ IF (COMPILER.EQS."VAXC")
+$ THEN
+$!
+$! Check To See If We Already Have A VAX C Linker Option File.
+$!
+$ IF (F$SEARCH(OPT_FILE).EQS."")
+$ THEN
+$!
+$! We Need A VAX C Linker Option File.
+$!
+$ CREATE 'OPT_FILE'
+$DECK
+!
+! Default System Options File To Link Agianst
+! The Sharable VAX C Runtime Library.
+!
+SYS$SHARE:VAXCRTL.EXE/SHARE
+$EOD
+$!
+$! End The Option File Check.
+$!
+$ ENDIF
+$!
+$! End The VAXC Check.
+$!
+$ ENDIF
+$!
+$! Check To See If We Need A GNU C Option File.
+$!
+$ IF (COMPILER.EQS."GNUC")
+$ THEN
+$!
+$! Check To See If We Already Have A GNU C Linker Option File.
+$!
+$ IF (F$SEARCH(OPT_FILE).EQS."")
+$ THEN
+$!
+$! We Need A GNU C Linker Option File.
+$!
+$ CREATE 'OPT_FILE'
+$DECK
+!
+! Default System Options File To Link Agianst
+! The Sharable C Runtime Library.
+!
+GNU_CC:[000000]GCCLIB/LIBRARY
+SYS$SHARE:VAXCRTL/SHARE
+$EOD
+$!
+$! End The Option File Check.
+$!
+$ ENDIF
+$!
+$! End The GNU C Check.
+$!
+$ ENDIF
+$!
+$! Check To See If We Need A DEC C Option File.
+$!
+$ IF (COMPILER.EQS."DECC")
+$ THEN
+$!
+$! Check To See If We Already Have A DEC C Linker Option File.
+$!
+$ IF (F$SEARCH(OPT_FILE).EQS."")
+$ THEN
+$!
+$! Figure Out If We Need A non-VAX Or A VAX Linker Option File.
+$!
+$ IF ARCH .EQS. "VAX"
+$ THEN
+$!
+$! We Need A DEC C Linker Option File For VAX.
+$!
+$ CREATE 'OPT_FILE'
+$DECK
+!
+! Default System Options File To Link Agianst
+! The Sharable DEC C Runtime Library.
+!
+SYS$SHARE:DECC$SHR.EXE/SHARE
+$EOD
+$!
+$! Else...
+$!
+$ ELSE
+$!
+$! Create The non-VAX Linker Option File.
+$!
+$ CREATE 'OPT_FILE'
+$DECK
+!
+! Default System Options File For non-VAX To Link Agianst
+! The Sharable C Runtime Library.
+!
+SYS$SHARE:CMA$OPEN_LIB_SHR/SHARE
+SYS$SHARE:CMA$OPEN_RTL/SHARE
+$EOD
+$!
+$! End The DEC C Option File Check.
+$!
+$ ENDIF
+$!
+$! End The Option File Search.
+$!
+$ ENDIF
+$!
+$! End The DEC C Check.
+$!
+$ ENDIF
+$!
+$! Tell The User What Linker Option File We Are Using.
+$!
+$ WRITE SYS$OUTPUT "Using Linker Option File ",OPT_FILE,"."
+$!
+$! Time To RETURN.
+$!
+$ RETURN
+$!
+$! Check The User's Options.
+$!
+$ CHECK_OPTIONS:
+$!
+$! Check To See If P1 Is Blank.
+$!
+$ IF (P1.EQS."ALL")
+$ THEN
+$!
+$! P1 Is Blank, So Build Everything.
+$!
+$ BUILDALL = "TRUE"
+$!
+$! Else...
+$!
+$ ELSE
+$!
+$! Else, Check To See If P1 Has A Valid Argument.
+$!
+$ IF (P1.EQS."LIBRARY").OR.(P1.EQS."APPS")
+$ THEN
+$!
+$! A Valid Argument.
+$!
+$ BUILDALL = P1
+$!
+$! Else...
+$!
+$ ELSE
+$!
+$! Tell The User We Don't Know What They Want.
+$!
+$ WRITE SYS$OUTPUT ""
+$ WRITE SYS$OUTPUT "The Option ",P1," Is Invalid. The Valid Options Are:"
+$ WRITE SYS$OUTPUT ""
+$ WRITE SYS$OUTPUT " ALL : Just Build Everything."
+$ WRITE SYS$OUTPUT " LIBRARY : To Compile Just The [.xxx.EXE.CRYPTO]LIBCRYPTO.OLB Library."
+$ WRITE SYS$OUTPUT " APPS : To Compile Just The [.xxx.EXE.CRYPTO]*.EXE Programs."
+$ WRITE SYS$OUTPUT ""
+$ WRITE SYS$OUTPUT " Where 'xxx' Stands For:"
+$ WRITE SYS$OUTPUT ""
+$ WRITE SYS$OUTPUT " ALPHA : Alpha Architecture."
+$ WRITE SYS$OUTPUT " IA64 : IA64 Architecture."
+$ WRITE SYS$OUTPUT " VAX : VAX Architecture."
+$ WRITE SYS$OUTPUT ""
+$!
+$! Time To EXIT.
+$!
+$ EXIT
+$!
+$! End The Valid Argument Check.
+$!
+$ ENDIF
+$!
+$! End The P1 Check.
+$!
+$ ENDIF
+$!
+$! Check To See If P2 Is Blank.
+$!
+$ IF (P2.EQS."NODEBUG")
+$ THEN
+$!
+$! P2 Is NODEBUG, So Compile Without The Debugger Information.
+$!
+$ DEBUGGER = "NODEBUG"
+$ TRACEBACK = "NOTRACEBACK"
+$ GCC_OPTIMIZE = "OPTIMIZE"
+$ CC_OPTIMIZE = "OPTIMIZE"
+$ MACRO_OPTIMIZE = "OPTIMIZE"
+$ WRITE SYS$OUTPUT "No Debugger Information Will Be Produced During Compile."
+$ WRITE SYS$OUTPUT "Compiling With Compiler Optimization."
+$ ELSE
+$!
+$! Check To See If We Are To Compile With Debugger Information.
+$!
+$ IF (P2.EQS."DEBUG")
+$ THEN
+$!
+$! Compile With Debugger Information.
+$!
+$ DEBUGGER = "DEBUG"
+$ TRACEBACK = "TRACEBACK"
+$ GCC_OPTIMIZE = "NOOPTIMIZE"
+$ CC_OPTIMIZE = "NOOPTIMIZE"
+$ MACRO_OPTIMIZE = "NOOPTIMIZE"
+$ WRITE SYS$OUTPUT "Debugger Information Will Be Produced During Compile."
+$ WRITE SYS$OUTPUT "Compiling Without Compiler Optimization."
+$ ELSE
+$!
+$! They Entered An Invalid Option..
+$!
+$ WRITE SYS$OUTPUT ""
+$ WRITE SYS$OUTPUT "The Option ",P2," Is Invalid. The Valid Options Are:"
+$ WRITE SYS$OUTPUT ""
+$ WRITE SYS$OUTPUT " DEBUG : Compile With The Debugger Information."
+$ WRITE SYS$OUTPUT " NODEBUG : Compile Without The Debugger Information."
+$ WRITE SYS$OUTPUT ""
+$!
+$! Time To EXIT.
+$!
+$ EXIT
+$!
+$! End The Valid Argument Check.
+$!
+$ ENDIF
+$!
+$! End The P2 Check.
+$!
+$ ENDIF
+$!
+$! Special Threads For OpenVMS v7.1 Or Later
+$!
+$! Written By: Richard Levitte
+$! richard@levitte.org
+$!
+$!
+$! Check To See If We Have A Option For P5.
+$!
+$ IF (P5.EQS."")
+$ THEN
+$!
+$! Get The Version Of VMS We Are Using.
+$!
+$ ISSEVEN :=
+$ TMP = F$ELEMENT(0,"-",F$EXTRACT(1,4,F$GETSYI("VERSION")))
+$ TMP = F$INTEGER(F$ELEMENT(0,".",TMP)+F$ELEMENT(1,".",TMP))
+$!
+$! Check To See If The VMS Version Is v7.1 Or Later.
+$!
+$ IF (TMP.GE.71)
+$ THEN
+$!
+$! We Have OpenVMS v7.1 Or Later, So Use The Special Threads.
+$!
+$ ISSEVEN := ,PTHREAD_USE_D4
+$!
+$! End The VMS Version Check.
+$!
+$ ENDIF
+$!
+$! End The P5 Check.
+$!
+$ ENDIF
+$!
+$! Check To See If P7 Is Blank.
+$!
+$ IF (P7.EQS."")
+$ THEN
+$ POINTER_SIZE = ""
+$ ELSE
+$!
+$! Check is P7 Is Valid
+$!
+$ IF (P7.EQS."32")
+$ THEN
+$ POINTER_SIZE = "/POINTER_SIZE=32"
+$ IF ARCH .EQS. "VAX"
+$ THEN
+$ LIB32 = ""
+$ ELSE
+$ LIB32 = "32"
+$ ENDIF
+$ ELSE
+$ IF (P7.EQS."64")
+$ THEN
+$ LIB32 = ""
+$ IF ARCH .EQS. "VAX"
+$ THEN
+$ POINTER_SIZE = "/POINTER_SIZE=32"
+$ ELSE
+$ POINTER_SIZE = "/POINTER_SIZE=64"
+$ ENDIF
+$ ELSE
+$!
+$! Tell The User Entered An Invalid Option..
+$!
+$ WRITE SYS$OUTPUT ""
+$ WRITE SYS$OUTPUT "The Option ",P7," Is Invalid. The Valid Options Are:"
+$ WRITE SYS$OUTPUT ""
+$ WRITE SYS$OUTPUT " 32 : Compile with 32 bit pointer size"
+$ WRITE SYS$OUTPUT " 64 : Compile with 64 bit pointer size"
+$ WRITE SYS$OUTPUT ""
+$!
+$! Time To EXIT.
+$!
+$ GOTO TIDY
+$!
+$! End The Valid Arguement Check.
+$!
+$ ENDIF
+$ ENDIF
+$!
+$! End The P7 Check.
+$!
+$ ENDIF
+$!
+$! Check To See If P3 Is Blank.
+$!
+$ IF (P3.EQS."")
+$ THEN
+$!
+$! O.K., The User Didn't Specify A Compiler, Let's Try To
+$! Find Out Which One To Use.
+$!
+$! Check To See If We Have GNU C.
+$!
+$ IF (F$TRNLNM("GNU_CC").NES."")
+$ THEN
+$!
+$! Looks Like GNUC, Set To Use GNUC.
+$!
+$ P3 = "GNUC"
+$!
+$! Else...
+$!
+$ ELSE
+$!
+$! Check To See If We Have VAXC Or DECC.
+$!
+$ IF (ARCH.NES."VAX").OR.(F$TRNLNM("DECC$CC_DEFAULT").NES."")
+$ THEN
+$!
+$! Looks Like DECC, Set To Use DECC.
+$!
+$ P3 = "DECC"
+$!
+$! Else...
+$!
+$ ELSE
+$!
+$! Looks Like VAXC, Set To Use VAXC.
+$!
+$ P3 = "VAXC"
+$!
+$! End The VAXC Compiler Check.
+$!
+$ ENDIF
+$!
+$! End The DECC & VAXC Compiler Check.
+$!
+$ ENDIF
+$!
+$! End The Compiler Check.
+$!
+$ ENDIF
+$!
+$! Check To See If We Have A Option For P4.
+$!
+$ IF (P4.EQS."")
+$ THEN
+$!
+$! Find out what socket library we have available
+$!
+$ IF F$PARSE("SOCKETSHR:") .NES. ""
+$ THEN
+$!
+$! We have SOCKETSHR, and it is my opinion that it's the best to use.
+$!
+$ P4 = "SOCKETSHR"
+$!
+$! Tell the user
+$!
+$ WRITE SYS$OUTPUT "Using SOCKETSHR for TCP/IP"
+$!
+$! Else, let's look for something else
+$!
+$ ELSE
+$!
+$! Like UCX (the reason to do this before Multinet is that the UCX
+$! emulation is easier to use...)
+$!
+$ IF F$TRNLNM("UCX$IPC_SHR") .NES. "" -
+ .OR. F$PARSE("SYS$SHARE:UCX$IPC_SHR.EXE") .NES. "" -
+ .OR. F$PARSE("SYS$LIBRARY:UCX$IPC.OLB") .NES. ""
+$ THEN
+$!
+$! Last resort: a UCX or UCX-compatible library
+$!
+$ P4 = "UCX"
+$!
+$! Tell the user
+$!
+$ WRITE SYS$OUTPUT "Using UCX or an emulation thereof for TCP/IP"
+$!
+$! That was all...
+$!
+$ ENDIF
+$ ENDIF
+$ ENDIF
+$!
+$! Set Up Initial CC Definitions, Possibly With User Ones
+$!
+$ CCDEFS = "TCPIP_TYPE_''P4',DSO_VMS"
+$ IF F$TYPE(USER_CCDEFS) .NES. "" THEN CCDEFS = CCDEFS + "," + USER_CCDEFS
+$ CCEXTRAFLAGS = ""
+$ IF F$TYPE(USER_CCFLAGS) .NES. "" THEN CCEXTRAFLAGS = USER_CCFLAGS
+$ CCDISABLEWARNINGS = "LONGLONGTYPE,LONGLONGSUFX,FOUNDCR"
+$ IF F$TYPE(USER_CCDISABLEWARNINGS) .NES. "" THEN -
+ CCDISABLEWARNINGS = CCDISABLEWARNINGS + "," + USER_CCDISABLEWARNINGS
+$!
+$! Check To See If The User Entered A Valid Paramter.
+$!
+$ IF (P3.EQS."VAXC").OR.(P3.EQS."DECC").OR.(P3.EQS."GNUC")
+$ THEN
+$!
+$! Check To See If The User Wanted DECC.
+$!
+$ IF (P3.EQS."DECC")
+$ THEN
+$!
+$! Looks Like DECC, Set To Use DECC.
+$!
+$ COMPILER = "DECC"
+$!
+$! Tell The User We Are Using DECC.
+$!
+$ WRITE SYS$OUTPUT "Using DECC 'C' Compiler."
+$!
+$! Use DECC...
+$!
+$ CC = "CC"
+$ IF ARCH.EQS."VAX" .AND. F$TRNLNM("DECC$CC_DEFAULT").NES."/DECC" -
+ THEN CC = "CC/DECC"
+$ CC = CC + "/''CC_OPTIMIZE'/''DEBUGGER'/STANDARD=ANSI89''POINTER_SIZE'" + -
+ "/NOLIST/PREFIX=ALL" + -
+ "/INCLUDE=(SYS$DISK:[._''ARCH'],SYS$DISK:[],SYS$DISK:[-],SYS$DISK:[.ENGINE.VENDOR_DEFNS],SYS$DISK:[.EVP],SYS$DISK:[.ASN1])" + -
+ CCEXTRAFLAGS
+$!
+$! Define The Linker Options File Name.
+$!
+$ OPT_FILE = "''EXE_DIR'VAX_DECC_OPTIONS.OPT"
+$!
+$! End DECC Check.
+$!
+$ ENDIF
+$!
+$! Check To See If We Are To Use VAXC.
+$!
+$ IF (P3.EQS."VAXC")
+$ THEN
+$!
+$! Looks Like VAXC, Set To Use VAXC.
+$!
+$ COMPILER = "VAXC"
+$!
+$! Tell The User We Are Using VAX C.
+$!
+$ WRITE SYS$OUTPUT "Using VAXC 'C' Compiler."
+$!
+$! Compile Using VAXC.
+$!
+$ CC = "CC"
+$ IF ARCH.NES."VAX"
+$ THEN
+$ WRITE SYS$OUTPUT "There is no VAX C on ''ARCH'!"
+$ EXIT
+$ ENDIF
+$ IF F$TRNLNM("DECC$CC_DEFAULT").EQS."/DECC" THEN CC = "CC/VAXC"
+$ CC = CC + "/''CC_OPTIMIZE'/''DEBUGGER'/NOLIST" + -
+ "/INCLUDE=(SYS$DISK:[._''ARCH'],SYS$DISK:[],SYS$DISK:[-],SYS$DISK:[.ENGINE.VENDOR_DEFNS],SYS$DISK:[.EVP],SYS$DISK:[.ASN1])" + -
+ CCEXTRAFLAGS
+$ CCDEFS = """VAXC""," + CCDEFS
+$!
+$! Define <sys> As SYS$COMMON:[SYSLIB]
+$!
+$ DEFINE/NOLOG SYS SYS$COMMON:[SYSLIB]
+$!
+$! Define The Linker Options File Name.
+$!
+$ OPT_FILE = "''EXE_DIR'VAX_VAXC_OPTIONS.OPT"
+$!
+$! End VAXC Check
+$!
+$ ENDIF
+$!
+$! Check To See If We Are To Use GNU C.
+$!
+$ IF (P3.EQS."GNUC")
+$ THEN
+$!
+$! Looks Like GNUC, Set To Use GNUC.
+$!
+$ COMPILER = "GNUC"
+$!
+$! Tell The User We Are Using GNUC.
+$!
+$ WRITE SYS$OUTPUT "Using GNU 'C' Compiler."
+$!
+$! Use GNU C...
+$!
+$ CC = "GCC/NOCASE_HACK/''GCC_OPTIMIZE'/''DEBUGGER'/NOLIST" + -
+ "/INCLUDE=(SYS$DISK:[._''ARCH'],SYS$DISK:[],SYS$DISK:[-],SYS$DISK:[.ENGINE.VENDOR_DEFNS],SYS$DISK:[.EVP],SYS$DISK:[.ASN1])" + -
+ CCEXTRAFLAGS
+$!
+$! Define The Linker Options File Name.
+$!
+$ OPT_FILE = "''EXE_DIR'VAX_GNUC_OPTIONS.OPT"
+$!
+$! End The GNU C Check.
+$!
+$ ENDIF
+$!
+$! Set up default defines
+$!
+$ CCDEFS = """FLAT_INC=1""," + CCDEFS
+$!
+$! Finish up the definition of CC.
+$!
+$ IF COMPILER .EQS. "DECC"
+$ THEN
+$ IF CCDISABLEWARNINGS .EQS. ""
+$ THEN
+$ CC4DISABLEWARNINGS = "DOLLARID"
+$ CC6DISABLEWARNINGS = "MIXLINKAGE"
+$ ELSE
+$ CC4DISABLEWARNINGS = CCDISABLEWARNINGS + ",DOLLARID"
+$ CC6DISABLEWARNINGS = CCDISABLEWARNINGS + ",MIXLINKAGE"
+$ CCDISABLEWARNINGS = "/WARNING=(DISABLE=(" + CCDISABLEWARNINGS + "))"
+$ ENDIF
+$ CC4DISABLEWARNINGS = "/WARNING=(DISABLE=(" + CC4DISABLEWARNINGS + "))"
+$ CC6DISABLEWARNINGS = "/WARNING=(DISABLE=(" + CC6DISABLEWARNINGS + "))"
+$ ELSE
+$ CCDISABLEWARNINGS = ""
+$ CC4DISABLEWARNINGS = ""
+$ CC6DISABLEWARNINGS = ""
+$ ENDIF
+$ CC3 = CC + "/DEFINE=(" + CCDEFS + ISSEVEN + ")" + CCDISABLEWARNINGS
+$ CC = CC + "/DEFINE=(" + CCDEFS + ")" + CCDISABLEWARNINGS
+$ IF ARCH .EQS. "VAX" .AND. COMPILER .EQS. "DECC" .AND. P2 .NES. "DEBUG"
+$ THEN
+$ CC5 = CC + "/OPTIMIZE=NODISJOINT"
+$ ELSE
+$ CC5 = CC + "/NOOPTIMIZE"
+$ ENDIF
+$ CC4 = CC - CCDISABLEWARNINGS + CC4DISABLEWARNINGS
+$ CC6 = CC - CCDISABLEWARNINGS + CC6DISABLEWARNINGS
+$!
+$! Show user the result
+$!
+$ WRITE/SYMBOL SYS$OUTPUT "Main C Compiling Command: ",CC
+$!
+$! Else The User Entered An Invalid Argument.
+$!
+$ ELSE
+$!
+$! Tell The User We Don't Know What They Want.
+$!
+$ WRITE SYS$OUTPUT ""
+$ WRITE SYS$OUTPUT "The Option ",P3," Is Invalid. The Valid Options Are:"
+$ WRITE SYS$OUTPUT ""
+$ WRITE SYS$OUTPUT " VAXC : To Compile With VAX C."
+$ WRITE SYS$OUTPUT " DECC : To Compile With DEC C."
+$ WRITE SYS$OUTPUT " GNUC : To Compile With GNU C."
+$ WRITE SYS$OUTPUT ""
+$!
+$! Time To EXIT.
+$!
+$ EXIT
+$!
+$! End The Valid Argument Check.
+$!
+$ ENDIF
+$!
+$! Build a MACRO command for the architecture at hand
+$!
+$ IF ARCH .EQS. "VAX" THEN MACRO = "MACRO/''DEBUGGER'"
+$ IF ARCH .NES. "VAX" THEN MACRO = "MACRO/MIGRATION/''DEBUGGER'/''MACRO_OPTIMIZE'"
+$!
+$! Show user the result
+$!
+$ WRITE/SYMBOL SYS$OUTPUT "Main MACRO Compiling Command: ",MACRO
+$!
+$! Time to check the contents, and to make sure we get the correct library.
+$!
+$ IF P4.EQS."SOCKETSHR" .OR. P4.EQS."MULTINET" .OR. P4.EQS."UCX" -
+ .OR. P4.EQS."TCPIP" .OR. P4.EQS."NONE"
+$ THEN
+$!
+$! Check to see if SOCKETSHR was chosen
+$!
+$ IF P4.EQS."SOCKETSHR"
+$ THEN
+$!
+$! Set the library to use SOCKETSHR
+$!
+$ TCPIP_LIB = "SYS$DISK:[-.VMS]SOCKETSHR_SHR.OPT/OPT"
+$!
+$! Done with SOCKETSHR
+$!
+$ ENDIF
+$!
+$! Check to see if MULTINET was chosen
+$!
+$ IF P4.EQS."MULTINET"
+$ THEN
+$!
+$! Set the library to use UCX emulation.
+$!
+$ P4 = "UCX"
+$!
+$! Done with MULTINET
+$!
+$ ENDIF
+$!
+$! Check to see if UCX was chosen
+$!
+$ IF P4.EQS."UCX"
+$ THEN
+$!
+$! Set the library to use UCX.
+$!
+$ TCPIP_LIB = "SYS$DISK:[-.VMS]UCX_SHR_DECC.OPT/OPT"
+$ IF F$TRNLNM("UCX$IPC_SHR") .NES. ""
+$ THEN
+$ TCPIP_LIB = "SYS$DISK:[-.VMS]UCX_SHR_DECC_LOG.OPT/OPT"
+$ ELSE
+$ IF COMPILER .NES. "DECC" .AND. ARCH .EQS. "VAX" THEN -
+ TCPIP_LIB = "SYS$DISK:[-.VMS]UCX_SHR_VAXC.OPT/OPT"
+$ ENDIF
+$!
+$! Done with UCX
+$!
+$ ENDIF
+$!
+$! Check to see if TCPIP was chosen
+$!
+$ IF P4.EQS."TCPIP"
+$ THEN
+$!
+$! Set the library to use TCPIP (post UCX).
+$!
+$ TCPIP_LIB = "SYS$DISK:[-.VMS]TCPIP_SHR_DECC.OPT/OPT"
+$!
+$! Done with TCPIP
+$!
+$ ENDIF
+$!
+$! Check to see if NONE was chosen
+$!
+$ IF P4.EQS."NONE"
+$ THEN
+$!
+$! Do not use a TCPIP library.
+$!
+$ TCPIP_LIB = ""
+$!
+$! Done with TCPIP
+$!
+$ ENDIF
+$!
+$! Print info
+$!
+$ WRITE SYS$OUTPUT "TCP/IP library spec: ", TCPIP_LIB
+$!
+$! Else The User Entered An Invalid Argument.
+$!
+$ ELSE
+$!
+$! Tell The User We Don't Know What They Want.
+$!
+$ WRITE SYS$OUTPUT ""
+$ WRITE SYS$OUTPUT "The Option ",P4," Is Invalid. The Valid Options Are:"
+$ WRITE SYS$OUTPUT ""
+$ WRITE SYS$OUTPUT " SOCKETSHR : To link with SOCKETSHR TCP/IP library."
+$ WRITE SYS$OUTPUT " UCX : To link with UCX TCP/IP library."
+$ WRITE SYS$OUTPUT " TCPIP : To link with TCPIP (post UCX) TCP/IP library."
+$ WRITE SYS$OUTPUT ""
+$!
+$! Time To EXIT.
+$!
+$ EXIT
+$!
+$! Done with TCP/IP libraries
+$!
+$ ENDIF
+$!
+$! Check if the user wanted to compile just a subset of all the encryption
+$! methods.
+$!
+$ IF P6 .NES. ""
+$ THEN
+$ ENCRYPT_TYPES = P6
+$ ENDIF
+$!
+$! Time To RETURN...
+$!
+$ RETURN
+$!
+$ INITIALISE:
+$!
+$! Save old value of the logical name OPENSSL
+$!
+$ __SAVE_OPENSSL = F$TRNLNM("OPENSSL","LNM$PROCESS_TABLE")
+$!
+$! Save directory information
+$!
+$ __HERE = F$PARSE(F$PARSE("A.;",F$ENVIRONMENT("PROCEDURE"))-"A.;","[]A.;") - "A.;"
+$ __HERE = F$EDIT(__HERE,"UPCASE")
+$ __TOP = __HERE - "CRYPTO]"
+$ __INCLUDE = __TOP + "INCLUDE.OPENSSL]"
+$!
+$! Set up the logical name OPENSSL to point at the include directory
+$!
+$ DEFINE OPENSSL/NOLOG '__INCLUDE'
+$!
+$! Done
+$!
+$ RETURN
+$!
+$ CLEANUP:
+$!
+$! Restore the logical name OPENSSL if it had a value
+$!
+$ IF __SAVE_OPENSSL .EQS. ""
+$ THEN
+$ DEASSIGN OPENSSL
+$ ELSE
+$ DEFINE/NOLOG OPENSSL '__SAVE_OPENSSL'
+$ ENDIF
+$!
+$! Done
+$!
+$ RETURN
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-15 20:58:10 +0000