aboutsummaryrefslogtreecommitdiff
path: root/openssl/crypto/engine/engine.h
diff options
context:
space:
mode:
Diffstat (limited to 'openssl/crypto/engine/engine.h')
-rw-r--r--openssl/crypto/engine/engine.h1162
1 files changed, 640 insertions, 522 deletions
diff --git a/openssl/crypto/engine/engine.h b/openssl/crypto/engine/engine.h
index f8be49772..bd7b59144 100644
--- a/openssl/crypto/engine/engine.h
+++ b/openssl/crypto/engine/engine.h
@@ -1,6 +1,7 @@
/* openssl/engine.h */
-/* Written by Geoff Thorpe (geoff@geoffthorpe.net) for the OpenSSL
- * project 2000.
+/*
+ * Written by Geoff Thorpe (geoff@geoffthorpe.net) for the OpenSSL project
+ * 2000.
*/
/* ====================================================================
* Copyright (c) 1999-2004 The OpenSSL Project. All rights reserved.
@@ -10,7 +11,7 @@
* are met:
*
* 1. Redistributions of source code must retain the above copyright
- * notice, this list of conditions and the following disclaimer.
+ * notice, this list of conditions and the following disclaimer.
*
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
@@ -57,241 +58,294 @@
*/
/* ====================================================================
* Copyright 2002 Sun Microsystems, Inc. ALL RIGHTS RESERVED.
- * ECDH support in OpenSSL originally developed by
+ * ECDH support in OpenSSL originally developed by
* SUN MICROSYSTEMS, INC., and contributed to the OpenSSL project.
*/
#ifndef HEADER_ENGINE_H
-#define HEADER_ENGINE_H
-
-#include <openssl/opensslconf.h>
-
-#ifdef OPENSSL_NO_ENGINE
-#error ENGINE is disabled.
-#endif
-
-#ifndef OPENSSL_NO_DEPRECATED
-#include <openssl/bn.h>
-#ifndef OPENSSL_NO_RSA
-#include <openssl/rsa.h>
-#endif
-#ifndef OPENSSL_NO_DSA
-#include <openssl/dsa.h>
-#endif
-#ifndef OPENSSL_NO_DH
-#include <openssl/dh.h>
-#endif
-#ifndef OPENSSL_NO_ECDH
-#include <openssl/ecdh.h>
-#endif
-#ifndef OPENSSL_NO_ECDSA
-#include <openssl/ecdsa.h>
-#endif
-#include <openssl/rand.h>
-#include <openssl/ui.h>
-#include <openssl/err.h>
-#endif
-
-#include <openssl/ossl_typ.h>
-#include <openssl/symhacks.h>
-
-#include <openssl/x509.h>
+# define HEADER_ENGINE_H
+
+# include <openssl/opensslconf.h>
+
+# ifdef OPENSSL_NO_ENGINE
+# error ENGINE is disabled.
+# endif
+
+# ifndef OPENSSL_NO_DEPRECATED
+# include <openssl/bn.h>
+# ifndef OPENSSL_NO_RSA
+# include <openssl/rsa.h>
+# endif
+# ifndef OPENSSL_NO_DSA
+# include <openssl/dsa.h>
+# endif
+# ifndef OPENSSL_NO_DH
+# include <openssl/dh.h>
+# endif
+# ifndef OPENSSL_NO_ECDH
+# include <openssl/ecdh.h>
+# endif
+# ifndef OPENSSL_NO_ECDSA
+# include <openssl/ecdsa.h>
+# endif
+# include <openssl/rand.h>
+# include <openssl/ui.h>
+# include <openssl/err.h>
+# endif
+
+# include <openssl/ossl_typ.h>
+# include <openssl/symhacks.h>
+
+# include <openssl/x509.h>
#ifdef __cplusplus
extern "C" {
#endif
-/* These flags are used to control combinations of algorithm (methods)
- * by bitwise "OR"ing. */
-#define ENGINE_METHOD_RSA (unsigned int)0x0001
-#define ENGINE_METHOD_DSA (unsigned int)0x0002
-#define ENGINE_METHOD_DH (unsigned int)0x0004
-#define ENGINE_METHOD_RAND (unsigned int)0x0008
-#define ENGINE_METHOD_ECDH (unsigned int)0x0010
-#define ENGINE_METHOD_ECDSA (unsigned int)0x0020
-#define ENGINE_METHOD_CIPHERS (unsigned int)0x0040
-#define ENGINE_METHOD_DIGESTS (unsigned int)0x0080
-#define ENGINE_METHOD_STORE (unsigned int)0x0100
-#define ENGINE_METHOD_PKEY_METHS (unsigned int)0x0200
-#define ENGINE_METHOD_PKEY_ASN1_METHS (unsigned int)0x0400
+/*
+ * These flags are used to control combinations of algorithm (methods) by
+ * bitwise "OR"ing.
+ */
+# define ENGINE_METHOD_RSA (unsigned int)0x0001
+# define ENGINE_METHOD_DSA (unsigned int)0x0002
+# define ENGINE_METHOD_DH (unsigned int)0x0004
+# define ENGINE_METHOD_RAND (unsigned int)0x0008
+# define ENGINE_METHOD_ECDH (unsigned int)0x0010
+# define ENGINE_METHOD_ECDSA (unsigned int)0x0020
+# define ENGINE_METHOD_CIPHERS (unsigned int)0x0040
+# define ENGINE_METHOD_DIGESTS (unsigned int)0x0080
+# define ENGINE_METHOD_STORE (unsigned int)0x0100
+# define ENGINE_METHOD_PKEY_METHS (unsigned int)0x0200
+# define ENGINE_METHOD_PKEY_ASN1_METHS (unsigned int)0x0400
/* Obvious all-or-nothing cases. */
-#define ENGINE_METHOD_ALL (unsigned int)0xFFFF
-#define ENGINE_METHOD_NONE (unsigned int)0x0000
-
-/* This(ese) flag(s) controls behaviour of the ENGINE_TABLE mechanism used
- * internally to control registration of ENGINE implementations, and can be set
- * by ENGINE_set_table_flags(). The "NOINIT" flag prevents attempts to
- * initialise registered ENGINEs if they are not already initialised. */
-#define ENGINE_TABLE_FLAG_NOINIT (unsigned int)0x0001
+# define ENGINE_METHOD_ALL (unsigned int)0xFFFF
+# define ENGINE_METHOD_NONE (unsigned int)0x0000
+
+/*
+ * This(ese) flag(s) controls behaviour of the ENGINE_TABLE mechanism used
+ * internally to control registration of ENGINE implementations, and can be
+ * set by ENGINE_set_table_flags(). The "NOINIT" flag prevents attempts to
+ * initialise registered ENGINEs if they are not already initialised.
+ */
+# define ENGINE_TABLE_FLAG_NOINIT (unsigned int)0x0001
/* ENGINE flags that can be set by ENGINE_set_flags(). */
-/* #define ENGINE_FLAGS_MALLOCED 0x0001 */ /* Not used */
-
-/* This flag is for ENGINEs that wish to handle the various 'CMD'-related
- * control commands on their own. Without this flag, ENGINE_ctrl() handles these
- * control commands on behalf of the ENGINE using their "cmd_defns" data. */
-#define ENGINE_FLAGS_MANUAL_CMD_CTRL (int)0x0002
-
-/* This flag is for ENGINEs who return new duplicate structures when found via
- * "ENGINE_by_id()". When an ENGINE must store state (eg. if ENGINE_ctrl()
- * commands are called in sequence as part of some stateful process like
- * key-generation setup and execution), it can set this flag - then each attempt
- * to obtain the ENGINE will result in it being copied into a new structure.
- * Normally, ENGINEs don't declare this flag so ENGINE_by_id() just increments
- * the existing ENGINE's structural reference count. */
-#define ENGINE_FLAGS_BY_ID_COPY (int)0x0004
-
-/* This flag if for an ENGINE that does not want its methods registered as
- * part of ENGINE_register_all_complete() for example if the methods are
- * not usable as default methods.
- */
-
-#define ENGINE_FLAGS_NO_REGISTER_ALL (int)0x0008
-
-/* ENGINEs can support their own command types, and these flags are used in
- * ENGINE_CTRL_GET_CMD_FLAGS to indicate to the caller what kind of input each
- * command expects. Currently only numeric and string input is supported. If a
- * control command supports none of the _NUMERIC, _STRING, or _NO_INPUT options,
- * then it is regarded as an "internal" control command - and not for use in
- * config setting situations. As such, they're not available to the
- * ENGINE_ctrl_cmd_string() function, only raw ENGINE_ctrl() access. Changes to
- * this list of 'command types' should be reflected carefully in
- * ENGINE_cmd_is_executable() and ENGINE_ctrl_cmd_string(). */
+/* Not used */
+/* #define ENGINE_FLAGS_MALLOCED 0x0001 */
+
+/*
+ * This flag is for ENGINEs that wish to handle the various 'CMD'-related
+ * control commands on their own. Without this flag, ENGINE_ctrl() handles
+ * these control commands on behalf of the ENGINE using their "cmd_defns"
+ * data.
+ */
+# define ENGINE_FLAGS_MANUAL_CMD_CTRL (int)0x0002
+
+/*
+ * This flag is for ENGINEs who return new duplicate structures when found
+ * via "ENGINE_by_id()". When an ENGINE must store state (eg. if
+ * ENGINE_ctrl() commands are called in sequence as part of some stateful
+ * process like key-generation setup and execution), it can set this flag -
+ * then each attempt to obtain the ENGINE will result in it being copied into
+ * a new structure. Normally, ENGINEs don't declare this flag so
+ * ENGINE_by_id() just increments the existing ENGINE's structural reference
+ * count.
+ */
+# define ENGINE_FLAGS_BY_ID_COPY (int)0x0004
+
+/*
+ * This flag if for an ENGINE that does not want its methods registered as
+ * part of ENGINE_register_all_complete() for example if the methods are not
+ * usable as default methods.
+ */
+
+# define ENGINE_FLAGS_NO_REGISTER_ALL (int)0x0008
+
+/*
+ * ENGINEs can support their own command types, and these flags are used in
+ * ENGINE_CTRL_GET_CMD_FLAGS to indicate to the caller what kind of input
+ * each command expects. Currently only numeric and string input is
+ * supported. If a control command supports none of the _NUMERIC, _STRING, or
+ * _NO_INPUT options, then it is regarded as an "internal" control command -
+ * and not for use in config setting situations. As such, they're not
+ * available to the ENGINE_ctrl_cmd_string() function, only raw ENGINE_ctrl()
+ * access. Changes to this list of 'command types' should be reflected
+ * carefully in ENGINE_cmd_is_executable() and ENGINE_ctrl_cmd_string().
+ */
/* accepts a 'long' input value (3rd parameter to ENGINE_ctrl) */
-#define ENGINE_CMD_FLAG_NUMERIC (unsigned int)0x0001
-/* accepts string input (cast from 'void*' to 'const char *', 4th parameter to
- * ENGINE_ctrl) */
-#define ENGINE_CMD_FLAG_STRING (unsigned int)0x0002
-/* Indicates that the control command takes *no* input. Ie. the control command
- * is unparameterised. */
-#define ENGINE_CMD_FLAG_NO_INPUT (unsigned int)0x0004
-/* Indicates that the control command is internal. This control command won't
+# define ENGINE_CMD_FLAG_NUMERIC (unsigned int)0x0001
+/*
+ * accepts string input (cast from 'void*' to 'const char *', 4th parameter
+ * to ENGINE_ctrl)
+ */
+# define ENGINE_CMD_FLAG_STRING (unsigned int)0x0002
+/*
+ * Indicates that the control command takes *no* input. Ie. the control
+ * command is unparameterised.
+ */
+# define ENGINE_CMD_FLAG_NO_INPUT (unsigned int)0x0004
+/*
+ * Indicates that the control command is internal. This control command won't
* be shown in any output, and is only usable through the ENGINE_ctrl_cmd()
- * function. */
-#define ENGINE_CMD_FLAG_INTERNAL (unsigned int)0x0008
-
-/* NB: These 3 control commands are deprecated and should not be used. ENGINEs
- * relying on these commands should compile conditional support for
- * compatibility (eg. if these symbols are defined) but should also migrate the
- * same functionality to their own ENGINE-specific control functions that can be
- * "discovered" by calling applications. The fact these control commands
- * wouldn't be "executable" (ie. usable by text-based config) doesn't change the
- * fact that application code can find and use them without requiring per-ENGINE
- * hacking. */
-
-/* These flags are used to tell the ctrl function what should be done.
- * All command numbers are shared between all engines, even if some don't
- * make sense to some engines. In such a case, they do nothing but return
- * the error ENGINE_R_CTRL_COMMAND_NOT_IMPLEMENTED. */
-#define ENGINE_CTRL_SET_LOGSTREAM 1
-#define ENGINE_CTRL_SET_PASSWORD_CALLBACK 2
-#define ENGINE_CTRL_HUP 3 /* Close and reinitialise any
- handles/connections etc. */
-#define ENGINE_CTRL_SET_USER_INTERFACE 4 /* Alternative to callback */
-#define ENGINE_CTRL_SET_CALLBACK_DATA 5 /* User-specific data, used
- when calling the password
- callback and the user
- interface */
-#define ENGINE_CTRL_LOAD_CONFIGURATION 6 /* Load a configuration, given
- a string that represents a
- file name or so */
-#define ENGINE_CTRL_LOAD_SECTION 7 /* Load data from a given
- section in the already loaded
- configuration */
-
-/* These control commands allow an application to deal with an arbitrary engine
- * in a dynamic way. Warn: Negative return values indicate errors FOR THESE
- * COMMANDS because zero is used to indicate 'end-of-list'. Other commands,
- * including ENGINE-specific command types, return zero for an error.
- *
- * An ENGINE can choose to implement these ctrl functions, and can internally
- * manage things however it chooses - it does so by setting the
- * ENGINE_FLAGS_MANUAL_CMD_CTRL flag (using ENGINE_set_flags()). Otherwise the
- * ENGINE_ctrl() code handles this on the ENGINE's behalf using the cmd_defns
- * data (set using ENGINE_set_cmd_defns()). This means an ENGINE's ctrl()
- * handler need only implement its own commands - the above "meta" commands will
- * be taken care of. */
-
-/* Returns non-zero if the supplied ENGINE has a ctrl() handler. If "not", then
- * all the remaining control commands will return failure, so it is worth
- * checking this first if the caller is trying to "discover" the engine's
- * capabilities and doesn't want errors generated unnecessarily. */
-#define ENGINE_CTRL_HAS_CTRL_FUNCTION 10
-/* Returns a positive command number for the first command supported by the
- * engine. Returns zero if no ctrl commands are supported. */
-#define ENGINE_CTRL_GET_FIRST_CMD_TYPE 11
-/* The 'long' argument specifies a command implemented by the engine, and the
- * return value is the next command supported, or zero if there are no more. */
-#define ENGINE_CTRL_GET_NEXT_CMD_TYPE 12
-/* The 'void*' argument is a command name (cast from 'const char *'), and the
- * return value is the command that corresponds to it. */
-#define ENGINE_CTRL_GET_CMD_FROM_NAME 13
-/* The next two allow a command to be converted into its corresponding string
- * form. In each case, the 'long' argument supplies the command. In the NAME_LEN
- * case, the return value is the length of the command name (not counting a
- * trailing EOL). In the NAME case, the 'void*' argument must be a string buffer
- * large enough, and it will be populated with the name of the command (WITH a
- * trailing EOL). */
-#define ENGINE_CTRL_GET_NAME_LEN_FROM_CMD 14
-#define ENGINE_CTRL_GET_NAME_FROM_CMD 15
+ * function.
+ */
+# define ENGINE_CMD_FLAG_INTERNAL (unsigned int)0x0008
+
+/*
+ * NB: These 3 control commands are deprecated and should not be used.
+ * ENGINEs relying on these commands should compile conditional support for
+ * compatibility (eg. if these symbols are defined) but should also migrate
+ * the same functionality to their own ENGINE-specific control functions that
+ * can be "discovered" by calling applications. The fact these control
+ * commands wouldn't be "executable" (ie. usable by text-based config)
+ * doesn't change the fact that application code can find and use them
+ * without requiring per-ENGINE hacking.
+ */
+
+/*
+ * These flags are used to tell the ctrl function what should be done. All
+ * command numbers are shared between all engines, even if some don't make
+ * sense to some engines. In such a case, they do nothing but return the
+ * error ENGINE_R_CTRL_COMMAND_NOT_IMPLEMENTED.
+ */
+# define ENGINE_CTRL_SET_LOGSTREAM 1
+# define ENGINE_CTRL_SET_PASSWORD_CALLBACK 2
+# define ENGINE_CTRL_HUP 3/* Close and reinitialise
+ * any handles/connections
+ * etc. */
+# define ENGINE_CTRL_SET_USER_INTERFACE 4/* Alternative to callback */
+# define ENGINE_CTRL_SET_CALLBACK_DATA 5/* User-specific data, used
+ * when calling the password
+ * callback and the user
+ * interface */
+# define ENGINE_CTRL_LOAD_CONFIGURATION 6/* Load a configuration,
+ * given a string that
+ * represents a file name
+ * or so */
+# define ENGINE_CTRL_LOAD_SECTION 7/* Load data from a given
+ * section in the already
+ * loaded configuration */
+
+/*
+ * These control commands allow an application to deal with an arbitrary
+ * engine in a dynamic way. Warn: Negative return values indicate errors FOR
+ * THESE COMMANDS because zero is used to indicate 'end-of-list'. Other
+ * commands, including ENGINE-specific command types, return zero for an
+ * error. An ENGINE can choose to implement these ctrl functions, and can
+ * internally manage things however it chooses - it does so by setting the
+ * ENGINE_FLAGS_MANUAL_CMD_CTRL flag (using ENGINE_set_flags()). Otherwise
+ * the ENGINE_ctrl() code handles this on the ENGINE's behalf using the
+ * cmd_defns data (set using ENGINE_set_cmd_defns()). This means an ENGINE's
+ * ctrl() handler need only implement its own commands - the above "meta"
+ * commands will be taken care of.
+ */
+
+/*
+ * Returns non-zero if the supplied ENGINE has a ctrl() handler. If "not",
+ * then all the remaining control commands will return failure, so it is
+ * worth checking this first if the caller is trying to "discover" the
+ * engine's capabilities and doesn't want errors generated unnecessarily.
+ */
+# define ENGINE_CTRL_HAS_CTRL_FUNCTION 10
+/*
+ * Returns a positive command number for the first command supported by the
+ * engine. Returns zero if no ctrl commands are supported.
+ */
+# define ENGINE_CTRL_GET_FIRST_CMD_TYPE 11
+/*
+ * The 'long' argument specifies a command implemented by the engine, and the
+ * return value is the next command supported, or zero if there are no more.
+ */
+# define ENGINE_CTRL_GET_NEXT_CMD_TYPE 12
+/*
+ * The 'void*' argument is a command name (cast from 'const char *'), and the
+ * return value is the command that corresponds to it.
+ */
+# define ENGINE_CTRL_GET_CMD_FROM_NAME 13
+/*
+ * The next two allow a command to be converted into its corresponding string
+ * form. In each case, the 'long' argument supplies the command. In the
+ * NAME_LEN case, the return value is the length of the command name (not
+ * counting a trailing EOL). In the NAME case, the 'void*' argument must be a
+ * string buffer large enough, and it will be populated with the name of the
+ * command (WITH a trailing EOL).
+ */
+# define ENGINE_CTRL_GET_NAME_LEN_FROM_CMD 14
+# define ENGINE_CTRL_GET_NAME_FROM_CMD 15
/* The next two are similar but give a "short description" of a command. */
-#define ENGINE_CTRL_GET_DESC_LEN_FROM_CMD 16
-#define ENGINE_CTRL_GET_DESC_FROM_CMD 17
-/* With this command, the return value is the OR'd combination of
+# define ENGINE_CTRL_GET_DESC_LEN_FROM_CMD 16
+# define ENGINE_CTRL_GET_DESC_FROM_CMD 17
+/*
+ * With this command, the return value is the OR'd combination of
* ENGINE_CMD_FLAG_*** values that indicate what kind of input a given
- * engine-specific ctrl command expects. */
-#define ENGINE_CTRL_GET_CMD_FLAGS 18
+ * engine-specific ctrl command expects.
+ */
+# define ENGINE_CTRL_GET_CMD_FLAGS 18
-/* ENGINE implementations should start the numbering of their own control
- * commands from this value. (ie. ENGINE_CMD_BASE, ENGINE_CMD_BASE + 1, etc). */
-#define ENGINE_CMD_BASE 200
+/*
+ * ENGINE implementations should start the numbering of their own control
+ * commands from this value. (ie. ENGINE_CMD_BASE, ENGINE_CMD_BASE + 1, etc).
+ */
+# define ENGINE_CMD_BASE 200
-/* NB: These 2 nCipher "chil" control commands are deprecated, and their
+/*
+ * NB: These 2 nCipher "chil" control commands are deprecated, and their
* functionality is now available through ENGINE-specific control commands
* (exposed through the above-mentioned 'CMD'-handling). Code using these 2
- * commands should be migrated to the more general command handling before these
- * are removed. */
+ * commands should be migrated to the more general command handling before
+ * these are removed.
+ */
/* Flags specific to the nCipher "chil" engine */
-#define ENGINE_CTRL_CHIL_SET_FORKCHECK 100
- /* Depending on the value of the (long)i argument, this sets or
- * unsets the SimpleForkCheck flag in the CHIL API to enable or
- * disable checking and workarounds for applications that fork().
- */
-#define ENGINE_CTRL_CHIL_NO_LOCKING 101
- /* This prevents the initialisation function from providing mutex
- * callbacks to the nCipher library. */
-
-/* If an ENGINE supports its own specific control commands and wishes the
- * framework to handle the above 'ENGINE_CMD_***'-manipulation commands on its
- * behalf, it should supply a null-terminated array of ENGINE_CMD_DEFN entries
- * to ENGINE_set_cmd_defns(). It should also implement a ctrl() handler that
- * supports the stated commands (ie. the "cmd_num" entries as described by the
- * array). NB: The array must be ordered in increasing order of cmd_num.
- * "null-terminated" means that the last ENGINE_CMD_DEFN element has cmd_num set
- * to zero and/or cmd_name set to NULL. */
-typedef struct ENGINE_CMD_DEFN_st
- {
- unsigned int cmd_num; /* The command number */
- const char *cmd_name; /* The command name itself */
- const char *cmd_desc; /* A short description of the command */
- unsigned int cmd_flags; /* The input the command expects */
- } ENGINE_CMD_DEFN;
+# define ENGINE_CTRL_CHIL_SET_FORKCHECK 100
+ /*
+ * Depending on the value of the (long)i argument, this sets or
+ * unsets the SimpleForkCheck flag in the CHIL API to enable or
+ * disable checking and workarounds for applications that fork().
+ */
+# define ENGINE_CTRL_CHIL_NO_LOCKING 101
+ /*
+ * This prevents the initialisation function from providing mutex
+ * callbacks to the nCipher library.
+ */
+
+/*
+ * If an ENGINE supports its own specific control commands and wishes the
+ * framework to handle the above 'ENGINE_CMD_***'-manipulation commands on
+ * its behalf, it should supply a null-terminated array of ENGINE_CMD_DEFN
+ * entries to ENGINE_set_cmd_defns(). It should also implement a ctrl()
+ * handler that supports the stated commands (ie. the "cmd_num" entries as
+ * described by the array). NB: The array must be ordered in increasing order
+ * of cmd_num. "null-terminated" means that the last ENGINE_CMD_DEFN element
+ * has cmd_num set to zero and/or cmd_name set to NULL.
+ */
+typedef struct ENGINE_CMD_DEFN_st {
+ unsigned int cmd_num; /* The command number */
+ const char *cmd_name; /* The command name itself */
+ const char *cmd_desc; /* A short description of the command */
+ unsigned int cmd_flags; /* The input the command expects */
+} ENGINE_CMD_DEFN;
/* Generic function pointer */
-typedef int (*ENGINE_GEN_FUNC_PTR)(void);
+typedef int (*ENGINE_GEN_FUNC_PTR) (void);
/* Generic function pointer taking no arguments */
-typedef int (*ENGINE_GEN_INT_FUNC_PTR)(ENGINE *);
+typedef int (*ENGINE_GEN_INT_FUNC_PTR) (ENGINE *);
/* Specific control function pointer */
-typedef int (*ENGINE_CTRL_FUNC_PTR)(ENGINE *, int, long, void *, void (*f)(void));
+typedef int (*ENGINE_CTRL_FUNC_PTR) (ENGINE *, int, long, void *,
+ void (*f) (void));
/* Generic load_key function pointer */
-typedef EVP_PKEY * (*ENGINE_LOAD_KEY_PTR)(ENGINE *, const char *,
- UI_METHOD *ui_method, void *callback_data);
-typedef int (*ENGINE_SSL_CLIENT_CERT_PTR)(ENGINE *, SSL *ssl,
- STACK_OF(X509_NAME) *ca_dn, X509 **pcert, EVP_PKEY **pkey,
- STACK_OF(X509) **pother, UI_METHOD *ui_method, void *callback_data);
-/* These callback types are for an ENGINE's handler for cipher and digest logic.
+typedef EVP_PKEY *(*ENGINE_LOAD_KEY_PTR)(ENGINE *, const char *,
+ UI_METHOD *ui_method,
+ void *callback_data);
+typedef int (*ENGINE_SSL_CLIENT_CERT_PTR) (ENGINE *, SSL *ssl,
+ STACK_OF(X509_NAME) *ca_dn,
+ X509 **pcert, EVP_PKEY **pkey,
+ STACK_OF(X509) **pother,
+ UI_METHOD *ui_method,
+ void *callback_data);
+/*-
+ * These callback types are for an ENGINE's handler for cipher and digest logic.
* These handlers have these prototypes;
* int foo(ENGINE *e, const EVP_CIPHER **cipher, const int **nids, int nid);
* int foo(ENGINE *e, const EVP_MD **digest, const int **nids, int nid);
@@ -301,21 +355,29 @@ typedef int (*ENGINE_SSL_CLIENT_CERT_PTR)(ENGINE *, SSL *ssl,
* If the framework wants a list of supported 'nid's, it will call;
* foo(e, NULL, &p_nids, 0); (returns number of 'nids' or -1 for error)
*/
-/* Returns to a pointer to the array of supported cipher 'nid's. If the second
- * parameter is non-NULL it is set to the size of the returned array. */
-typedef int (*ENGINE_CIPHERS_PTR)(ENGINE *, const EVP_CIPHER **, const int **, int);
-typedef int (*ENGINE_DIGESTS_PTR)(ENGINE *, const EVP_MD **, const int **, int);
-typedef int (*ENGINE_PKEY_METHS_PTR)(ENGINE *, EVP_PKEY_METHOD **, const int **, int);
-typedef int (*ENGINE_PKEY_ASN1_METHS_PTR)(ENGINE *, EVP_PKEY_ASN1_METHOD **, const int **, int);
-/* STRUCTURE functions ... all of these functions deal with pointers to ENGINE
- * structures where the pointers have a "structural reference". This means that
- * their reference is to allowed access to the structure but it does not imply
- * that the structure is functional. To simply increment or decrement the
- * structural reference count, use ENGINE_by_id and ENGINE_free. NB: This is not
- * required when iterating using ENGINE_get_next as it will automatically
- * decrement the structural reference count of the "current" ENGINE and
- * increment the structural reference count of the ENGINE it returns (unless it
- * is NULL). */
+/*
+ * Returns to a pointer to the array of supported cipher 'nid's. If the
+ * second parameter is non-NULL it is set to the size of the returned array.
+ */
+typedef int (*ENGINE_CIPHERS_PTR) (ENGINE *, const EVP_CIPHER **,
+ const int **, int);
+typedef int (*ENGINE_DIGESTS_PTR) (ENGINE *, const EVP_MD **, const int **,
+ int);
+typedef int (*ENGINE_PKEY_METHS_PTR) (ENGINE *, EVP_PKEY_METHOD **,
+ const int **, int);
+typedef int (*ENGINE_PKEY_ASN1_METHS_PTR) (ENGINE *, EVP_PKEY_ASN1_METHOD **,
+ const int **, int);
+/*
+ * STRUCTURE functions ... all of these functions deal with pointers to
+ * ENGINE structures where the pointers have a "structural reference". This
+ * means that their reference is to allowed access to the structure but it
+ * does not imply that the structure is functional. To simply increment or
+ * decrement the structural reference count, use ENGINE_by_id and
+ * ENGINE_free. NB: This is not required when iterating using ENGINE_get_next
+ * as it will automatically decrement the structural reference count of the
+ * "current" ENGINE and increment the structural reference count of the
+ * ENGINE it returns (unless it is NULL).
+ */
/* Get the first/last "ENGINE" type available. */
ENGINE *ENGINE_get_first(void);
@@ -332,7 +394,7 @@ ENGINE *ENGINE_by_id(const char *id);
/* Add all the built-in engines. */
void ENGINE_load_openssl(void);
void ENGINE_load_dynamic(void);
-#ifndef OPENSSL_NO_STATIC_ENGINE
+# ifndef OPENSSL_NO_STATIC_ENGINE
void ENGINE_load_4758cca(void);
void ENGINE_load_aep(void);
void ENGINE_load_atalla(void);
@@ -343,30 +405,32 @@ void ENGINE_load_sureware(void);
void ENGINE_load_ubsec(void);
void ENGINE_load_padlock(void);
void ENGINE_load_capi(void);
-#ifndef OPENSSL_NO_GMP
+# ifndef OPENSSL_NO_GMP
void ENGINE_load_gmp(void);
-#endif
-#ifndef OPENSSL_NO_GOST
+# endif
+# ifndef OPENSSL_NO_GOST
void ENGINE_load_gost(void);
-#endif
-#endif
+# endif
+# endif
void ENGINE_load_cryptodev(void);
-void ENGINE_load_rsax(void);
void ENGINE_load_rdrand(void);
void ENGINE_load_builtin_engines(void);
-/* Get and set global flags (ENGINE_TABLE_FLAG_***) for the implementation
- * "registry" handling. */
+/*
+ * Get and set global flags (ENGINE_TABLE_FLAG_***) for the implementation
+ * "registry" handling.
+ */
unsigned int ENGINE_get_table_flags(void);
void ENGINE_set_table_flags(unsigned int flags);
-/* Manage registration of ENGINEs per "table". For each type, there are 3
+/*- Manage registration of ENGINEs per "table". For each type, there are 3
* functions;
* ENGINE_register_***(e) - registers the implementation from 'e' (if it has one)
* ENGINE_unregister_***(e) - unregister the implementation from 'e'
* ENGINE_register_all_***() - call ENGINE_register_***() for each 'e' in the list
* Cleanup is automatically registered from each table when required, so
- * ENGINE_cleanup() will reverse any "register" operations. */
+ * ENGINE_cleanup() will reverse any "register" operations.
+ */
int ENGINE_register_RSA(ENGINE *e);
void ENGINE_unregister_RSA(ENGINE *e);
@@ -412,63 +476,77 @@ int ENGINE_register_pkey_asn1_meths(ENGINE *e);
void ENGINE_unregister_pkey_asn1_meths(ENGINE *e);
void ENGINE_register_all_pkey_asn1_meths(void);
-/* These functions register all support from the above categories. Note, use of
- * these functions can result in static linkage of code your application may not
- * need. If you only need a subset of functionality, consider using more
- * selective initialisation. */
+/*
+ * These functions register all support from the above categories. Note, use
+ * of these functions can result in static linkage of code your application
+ * may not need. If you only need a subset of functionality, consider using
+ * more selective initialisation.
+ */
int ENGINE_register_complete(ENGINE *e);
int ENGINE_register_all_complete(void);
-/* Send parametrised control commands to the engine. The possibilities to send
- * down an integer, a pointer to data or a function pointer are provided. Any of
- * the parameters may or may not be NULL, depending on the command number. In
- * actuality, this function only requires a structural (rather than functional)
- * reference to an engine, but many control commands may require the engine be
- * functional. The caller should be aware of trying commands that require an
- * operational ENGINE, and only use functional references in such situations. */
-int ENGINE_ctrl(ENGINE *e, int cmd, long i, void *p, void (*f)(void));
-
-/* This function tests if an ENGINE-specific command is usable as a "setting".
- * Eg. in an application's config file that gets processed through
+/*
+ * Send parametrised control commands to the engine. The possibilities to
+ * send down an integer, a pointer to data or a function pointer are
+ * provided. Any of the parameters may or may not be NULL, depending on the
+ * command number. In actuality, this function only requires a structural
+ * (rather than functional) reference to an engine, but many control commands
+ * may require the engine be functional. The caller should be aware of trying
+ * commands that require an operational ENGINE, and only use functional
+ * references in such situations.
+ */
+int ENGINE_ctrl(ENGINE *e, int cmd, long i, void *p, void (*f) (void));
+
+/*
+ * This function tests if an ENGINE-specific command is usable as a
+ * "setting". Eg. in an application's config file that gets processed through
* ENGINE_ctrl_cmd_string(). If this returns zero, it is not available to
- * ENGINE_ctrl_cmd_string(), only ENGINE_ctrl(). */
+ * ENGINE_ctrl_cmd_string(), only ENGINE_ctrl().
+ */
int ENGINE_cmd_is_executable(ENGINE *e, int cmd);
-/* This function works like ENGINE_ctrl() with the exception of taking a
- * command name instead of a command number, and can handle optional commands.
- * See the comment on ENGINE_ctrl_cmd_string() for an explanation on how to
- * use the cmd_name and cmd_optional. */
+/*
+ * This function works like ENGINE_ctrl() with the exception of taking a
+ * command name instead of a command number, and can handle optional
+ * commands. See the comment on ENGINE_ctrl_cmd_string() for an explanation
+ * on how to use the cmd_name and cmd_optional.
+ */
int ENGINE_ctrl_cmd(ENGINE *e, const char *cmd_name,
- long i, void *p, void (*f)(void), int cmd_optional);
-
-/* This function passes a command-name and argument to an ENGINE. The cmd_name
- * is converted to a command number and the control command is called using
- * 'arg' as an argument (unless the ENGINE doesn't support such a command, in
- * which case no control command is called). The command is checked for input
- * flags, and if necessary the argument will be converted to a numeric value. If
- * cmd_optional is non-zero, then if the ENGINE doesn't support the given
- * cmd_name the return value will be success anyway. This function is intended
- * for applications to use so that users (or config files) can supply
- * engine-specific config data to the ENGINE at run-time to control behaviour of
- * specific engines. As such, it shouldn't be used for calling ENGINE_ctrl()
- * functions that return data, deal with binary data, or that are otherwise
- * supposed to be used directly through ENGINE_ctrl() in application code. Any
- * "return" data from an ENGINE_ctrl() operation in this function will be lost -
- * the return value is interpreted as failure if the return value is zero,
- * success otherwise, and this function returns a boolean value as a result. In
- * other words, vendors of 'ENGINE'-enabled devices should write ENGINE
- * implementations with parameterisations that work in this scheme, so that
- * compliant ENGINE-based applications can work consistently with the same
- * configuration for the same ENGINE-enabled devices, across applications. */
+ long i, void *p, void (*f) (void), int cmd_optional);
+
+/*
+ * This function passes a command-name and argument to an ENGINE. The
+ * cmd_name is converted to a command number and the control command is
+ * called using 'arg' as an argument (unless the ENGINE doesn't support such
+ * a command, in which case no control command is called). The command is
+ * checked for input flags, and if necessary the argument will be converted
+ * to a numeric value. If cmd_optional is non-zero, then if the ENGINE
+ * doesn't support the given cmd_name the return value will be success
+ * anyway. This function is intended for applications to use so that users
+ * (or config files) can supply engine-specific config data to the ENGINE at
+ * run-time to control behaviour of specific engines. As such, it shouldn't
+ * be used for calling ENGINE_ctrl() functions that return data, deal with
+ * binary data, or that are otherwise supposed to be used directly through
+ * ENGINE_ctrl() in application code. Any "return" data from an ENGINE_ctrl()
+ * operation in this function will be lost - the return value is interpreted
+ * as failure if the return value is zero, success otherwise, and this
+ * function returns a boolean value as a result. In other words, vendors of
+ * 'ENGINE'-enabled devices should write ENGINE implementations with
+ * parameterisations that work in this scheme, so that compliant ENGINE-based
+ * applications can work consistently with the same configuration for the
+ * same ENGINE-enabled devices, across applications.
+ */
int ENGINE_ctrl_cmd_string(ENGINE *e, const char *cmd_name, const char *arg,
- int cmd_optional);
-
-/* These functions are useful for manufacturing new ENGINE structures. They
- * don't address reference counting at all - one uses them to populate an ENGINE
- * structure with personalised implementations of things prior to using it
- * directly or adding it to the builtin ENGINE list in OpenSSL. These are also
- * here so that the ENGINE structure doesn't have to be exposed and break binary
- * compatibility! */
+ int cmd_optional);
+
+/*
+ * These functions are useful for manufacturing new ENGINE structures. They
+ * don't address reference counting at all - one uses them to populate an
+ * ENGINE structure with personalised implementations of things prior to
+ * using it directly or adding it to the builtin ENGINE list in OpenSSL.
+ * These are also here so that the ENGINE structure doesn't have to be
+ * exposed and break binary compatibility!
+ */
ENGINE *ENGINE_new(void);
int ENGINE_free(ENGINE *e);
int ENGINE_up_ref(ENGINE *e);
@@ -485,10 +563,12 @@ int ENGINE_set_destroy_function(ENGINE *e, ENGINE_GEN_INT_FUNC_PTR destroy_f);
int ENGINE_set_init_function(ENGINE *e, ENGINE_GEN_INT_FUNC_PTR init_f);
int ENGINE_set_finish_function(ENGINE *e, ENGINE_GEN_INT_FUNC_PTR finish_f);
int ENGINE_set_ctrl_function(ENGINE *e, ENGINE_CTRL_FUNC_PTR ctrl_f);
-int ENGINE_set_load_privkey_function(ENGINE *e, ENGINE_LOAD_KEY_PTR loadpriv_f);
+int ENGINE_set_load_privkey_function(ENGINE *e,
+ ENGINE_LOAD_KEY_PTR loadpriv_f);
int ENGINE_set_load_pubkey_function(ENGINE *e, ENGINE_LOAD_KEY_PTR loadpub_f);
int ENGINE_set_load_ssl_client_cert_function(ENGINE *e,
- ENGINE_SSL_CLIENT_CERT_PTR loadssl_f);
+ ENGINE_SSL_CLIENT_CERT_PTR
+ loadssl_f);
int ENGINE_set_ciphers(ENGINE *e, ENGINE_CIPHERS_PTR f);
int ENGINE_set_digests(ENGINE *e, ENGINE_DIGESTS_PTR f);
int ENGINE_set_pkey_meths(ENGINE *e, ENGINE_PKEY_METHS_PTR f);
@@ -497,20 +577,25 @@ int ENGINE_set_flags(ENGINE *e, int flags);
int ENGINE_set_cmd_defns(ENGINE *e, const ENGINE_CMD_DEFN *defns);
/* These functions allow control over any per-structure ENGINE data. */
int ENGINE_get_ex_new_index(long argl, void *argp, CRYPTO_EX_new *new_func,
- CRYPTO_EX_dup *dup_func, CRYPTO_EX_free *free_func);
+ CRYPTO_EX_dup *dup_func,
+ CRYPTO_EX_free *free_func);
int ENGINE_set_ex_data(ENGINE *e, int idx, void *arg);
void *ENGINE_get_ex_data(const ENGINE *e, int idx);
-/* This function cleans up anything that needs it. Eg. the ENGINE_add() function
- * automatically ensures the list cleanup function is registered to be called
- * from ENGINE_cleanup(). Similarly, all ENGINE_register_*** functions ensure
- * ENGINE_cleanup() will clean up after them. */
+/*
+ * This function cleans up anything that needs it. Eg. the ENGINE_add()
+ * function automatically ensures the list cleanup function is registered to
+ * be called from ENGINE_cleanup(). Similarly, all ENGINE_register_***
+ * functions ensure ENGINE_cleanup() will clean up after them.
+ */
void ENGINE_cleanup(void);
-/* These return values from within the ENGINE structure. These can be useful
+/*
+ * These return values from within the ENGINE structure. These can be useful
* with functional references as well as structural references - it depends
* which you obtained. Using the result for functional purposes if you only
- * obtained a structural reference may be problematic! */
+ * obtained a structural reference may be problematic!
+ */
const char *ENGINE_get_id(const ENGINE *e);
const char *ENGINE_get_name(const ENGINE *e);
const RSA_METHOD *ENGINE_get_RSA(const ENGINE *e);
@@ -526,7 +611,8 @@ ENGINE_GEN_INT_FUNC_PTR ENGINE_get_finish_function(const ENGINE *e);
ENGINE_CTRL_FUNC_PTR ENGINE_get_ctrl_function(const ENGINE *e);
ENGINE_LOAD_KEY_PTR ENGINE_get_load_privkey_function(const ENGINE *e);
ENGINE_LOAD_KEY_PTR ENGINE_get_load_pubkey_function(const ENGINE *e);
-ENGINE_SSL_CLIENT_CERT_PTR ENGINE_get_ssl_client_cert_function(const ENGINE *e);
+ENGINE_SSL_CLIENT_CERT_PTR ENGINE_get_ssl_client_cert_function(const ENGINE
+ *e);
ENGINE_CIPHERS_PTR ENGINE_get_ciphers(const ENGINE *e);
ENGINE_DIGESTS_PTR ENGINE_get_digests(const ENGINE *e);
ENGINE_PKEY_METHS_PTR ENGINE_get_pkey_meths(const ENGINE *e);
@@ -536,49 +622,60 @@ const EVP_MD *ENGINE_get_digest(ENGINE *e, int nid);
const EVP_PKEY_METHOD *ENGINE_get_pkey_meth(ENGINE *e, int nid);
const EVP_PKEY_ASN1_METHOD *ENGINE_get_pkey_asn1_meth(ENGINE *e, int nid);
const EVP_PKEY_ASN1_METHOD *ENGINE_get_pkey_asn1_meth_str(ENGINE *e,
- const char *str, int len);
+ const char *str,
+ int len);
const EVP_PKEY_ASN1_METHOD *ENGINE_pkey_asn1_find_str(ENGINE **pe,
- const char *str, int len);
+ const char *str,
+ int len);
const ENGINE_CMD_DEFN *ENGINE_get_cmd_defns(const ENGINE *e);
int ENGINE_get_flags(const ENGINE *e);
-/* FUNCTIONAL functions. These functions deal with ENGINE structures
- * that have (or will) be initialised for use. Broadly speaking, the
- * structural functions are useful for iterating the list of available
- * engine types, creating new engine types, and other "list" operations.
- * These functions actually deal with ENGINEs that are to be used. As
- * such these functions can fail (if applicable) when particular
- * engines are unavailable - eg. if a hardware accelerator is not
- * attached or not functioning correctly. Each ENGINE has 2 reference
- * counts; structural and functional. Every time a functional reference
- * is obtained or released, a corresponding structural reference is
- * automatically obtained or released too. */
-
-/* Initialise a engine type for use (or up its reference count if it's
- * already in use). This will fail if the engine is not currently
- * operational and cannot initialise. */
+/*
+ * FUNCTIONAL functions. These functions deal with ENGINE structures that
+ * have (or will) be initialised for use. Broadly speaking, the structural
+ * functions are useful for iterating the list of available engine types,
+ * creating new engine types, and other "list" operations. These functions
+ * actually deal with ENGINEs that are to be used. As such these functions
+ * can fail (if applicable) when particular engines are unavailable - eg. if
+ * a hardware accelerator is not attached or not functioning correctly. Each
+ * ENGINE has 2 reference counts; structural and functional. Every time a
+ * functional reference is obtained or released, a corresponding structural
+ * reference is automatically obtained or released too.
+ */
+
+/*
+ * Initialise a engine type for use (or up its reference count if it's
+ * already in use). This will fail if the engine is not currently operational
+ * and cannot initialise.
+ */
int ENGINE_init(ENGINE *e);
-/* Free a functional reference to a engine type. This does not require
- * a corresponding call to ENGINE_free as it also releases a structural
- * reference. */
+/*
+ * Free a functional reference to a engine type. This does not require a
+ * corresponding call to ENGINE_free as it also releases a structural
+ * reference.
+ */
int ENGINE_finish(ENGINE *e);
-/* The following functions handle keys that are stored in some secondary
+/*
+ * The following functions handle keys that are stored in some secondary
* location, handled by the engine. The storage may be on a card or
- * whatever. */
+ * whatever.
+ */
EVP_PKEY *ENGINE_load_private_key(ENGINE *e, const char *key_id,
- UI_METHOD *ui_method, void *callback_data);
+ UI_METHOD *ui_method, void *callback_data);
EVP_PKEY *ENGINE_load_public_key(ENGINE *e, const char *key_id,
- UI_METHOD *ui_method, void *callback_data);
+ UI_METHOD *ui_method, void *callback_data);
int ENGINE_load_ssl_client_cert(ENGINE *e, SSL *s,
- STACK_OF(X509_NAME) *ca_dn, X509 **pcert, EVP_PKEY **ppkey,
- STACK_OF(X509) **pother,
- UI_METHOD *ui_method, void *callback_data);
-
-/* This returns a pointer for the current ENGINE structure that
- * is (by default) performing any RSA operations. The value returned
- * is an incremented reference, so it should be free'd (ENGINE_finish)
- * before it is discarded. */
+ STACK_OF(X509_NAME) *ca_dn, X509 **pcert,
+ EVP_PKEY **ppkey, STACK_OF(X509) **pother,
+ UI_METHOD *ui_method, void *callback_data);
+
+/*
+ * This returns a pointer for the current ENGINE structure that is (by
+ * default) performing any RSA operations. The value returned is an
+ * incremented reference, so it should be free'd (ENGINE_finish) before it is
+ * discarded.
+ */
ENGINE *ENGINE_get_default_RSA(void);
/* Same for the other "methods" */
ENGINE *ENGINE_get_default_DSA(void);
@@ -586,17 +683,21 @@ ENGINE *ENGINE_get_default_ECDH(void);
ENGINE *ENGINE_get_default_ECDSA(void);
ENGINE *ENGINE_get_default_DH(void);
ENGINE *ENGINE_get_default_RAND(void);
-/* These functions can be used to get a functional reference to perform
- * ciphering or digesting corresponding to "nid". */
+/*
+ * These functions can be used to get a functional reference to perform
+ * ciphering or digesting corresponding to "nid".
+ */
ENGINE *ENGINE_get_cipher_engine(int nid);
ENGINE *ENGINE_get_digest_engine(int nid);
ENGINE *ENGINE_get_pkey_meth_engine(int nid);
ENGINE *ENGINE_get_pkey_asn1_meth_engine(int nid);
-/* This sets a new default ENGINE structure for performing RSA
- * operations. If the result is non-zero (success) then the ENGINE
- * structure will have had its reference count up'd so the caller
- * should still free their own reference 'e'. */
+/*
+ * This sets a new default ENGINE structure for performing RSA operations. If
+ * the result is non-zero (success) then the ENGINE structure will have had
+ * its reference count up'd so the caller should still free their own
+ * reference 'e'.
+ */
int ENGINE_set_default_RSA(ENGINE *e);
int ENGINE_set_default_string(ENGINE *e, const char *def_list);
/* Same for the other "methods" */
@@ -610,11 +711,13 @@ int ENGINE_set_default_digests(ENGINE *e);
int ENGINE_set_default_pkey_meths(ENGINE *e);
int ENGINE_set_default_pkey_asn1_meths(ENGINE *e);
-/* The combination "set" - the flags are bitwise "OR"d from the
+/*
+ * The combination "set" - the flags are bitwise "OR"d from the
* ENGINE_METHOD_*** defines above. As with the "ENGINE_register_complete()"
* function, this function can result in unnecessary static linkage. If your
* application requires only specific functionality, consider using more
- * selective functions. */
+ * selective functions.
+ */
int ENGINE_set_default(ENGINE *e, unsigned int flags);
void ENGINE_add_conf_module(void);
@@ -627,125 +730,140 @@ void ENGINE_add_conf_module(void);
/**************************/
/* Binary/behaviour compatibility levels */
-#define OSSL_DYNAMIC_VERSION (unsigned long)0x00020000
-/* Binary versions older than this are too old for us (whether we're a loader or
- * a loadee) */
-#define OSSL_DYNAMIC_OLDEST (unsigned long)0x00020000
-
-/* When compiling an ENGINE entirely as an external shared library, loadable by
- * the "dynamic" ENGINE, these types are needed. The 'dynamic_fns' structure
- * type provides the calling application's (or library's) error functionality
- * and memory management function pointers to the loaded library. These should
- * be used/set in the loaded library code so that the loading application's
- * 'state' will be used/changed in all operations. The 'static_state' pointer
- * allows the loaded library to know if it shares the same static data as the
- * calling application (or library), and thus whether these callbacks need to be
- * set or not. */
-typedef void *(*dyn_MEM_malloc_cb)(size_t);
-typedef void *(*dyn_MEM_realloc_cb)(void *, size_t);
-typedef void (*dyn_MEM_free_cb)(void *);
+# define OSSL_DYNAMIC_VERSION (unsigned long)0x00020000
+/*
+ * Binary versions older than this are too old for us (whether we're a loader
+ * or a loadee)
+ */
+# define OSSL_DYNAMIC_OLDEST (unsigned long)0x00020000
+
+/*
+ * When compiling an ENGINE entirely as an external shared library, loadable
+ * by the "dynamic" ENGINE, these types are needed. The 'dynamic_fns'
+ * structure type provides the calling application's (or library's) error
+ * functionality and memory management function pointers to the loaded
+ * library. These should be used/set in the loaded library code so that the
+ * loading application's 'state' will be used/changed in all operations. The
+ * 'static_state' pointer allows the loaded library to know if it shares the
+ * same static data as the calling application (or library), and thus whether
+ * these callbacks need to be set or not.
+ */
+typedef void *(*dyn_MEM_malloc_cb) (size_t);
+typedef void *(*dyn_MEM_realloc_cb) (void *, size_t);
+typedef void (*dyn_MEM_free_cb) (void *);
typedef struct st_dynamic_MEM_fns {
- dyn_MEM_malloc_cb malloc_cb;
- dyn_MEM_realloc_cb realloc_cb;
- dyn_MEM_free_cb free_cb;
- } dynamic_MEM_fns;
-/* FIXME: Perhaps the memory and locking code (crypto.h) should declare and use
- * these types so we (and any other dependant code) can simplify a bit?? */
-typedef void (*dyn_lock_locking_cb)(int,int,const char *,int);
-typedef int (*dyn_lock_add_lock_cb)(int*,int,int,const char *,int);
-typedef struct CRYPTO_dynlock_value *(*dyn_dynlock_create_cb)(
- const char *,int);
-typedef void (*dyn_dynlock_lock_cb)(int,struct CRYPTO_dynlock_value *,
- const char *,int);
-typedef void (*dyn_dynlock_destroy_cb)(struct CRYPTO_dynlock_value *,
- const char *,int);
+ dyn_MEM_malloc_cb malloc_cb;
+ dyn_MEM_realloc_cb realloc_cb;
+ dyn_MEM_free_cb free_cb;
+} dynamic_MEM_fns;
+/*
+ * FIXME: Perhaps the memory and locking code (crypto.h) should declare and
+ * use these types so we (and any other dependant code) can simplify a bit??
+ */
+typedef void (*dyn_lock_locking_cb) (int, int, const char *, int);
+typedef int (*dyn_lock_add_lock_cb) (int *, int, int, const char *, int);
+typedef struct CRYPTO_dynlock_value *(*dyn_dynlock_create_cb) (const char *,
+ int);
+typedef void (*dyn_dynlock_lock_cb) (int, struct CRYPTO_dynlock_value *,
+ const char *, int);
+typedef void (*dyn_dynlock_destroy_cb) (struct CRYPTO_dynlock_value *,
+ const char *, int);
typedef struct st_dynamic_LOCK_fns {
- dyn_lock_locking_cb lock_locking_cb;
- dyn_lock_add_lock_cb lock_add_lock_cb;
- dyn_dynlock_create_cb dynlock_create_cb;
- dyn_dynlock_lock_cb dynlock_lock_cb;
- dyn_dynlock_destroy_cb dynlock_destroy_cb;
- } dynamic_LOCK_fns;
+ dyn_lock_locking_cb lock_locking_cb;
+ dyn_lock_add_lock_cb lock_add_lock_cb;
+ dyn_dynlock_create_cb dynlock_create_cb;
+ dyn_dynlock_lock_cb dynlock_lock_cb;
+ dyn_dynlock_destroy_cb dynlock_destroy_cb;
+} dynamic_LOCK_fns;
/* The top-level structure */
typedef struct st_dynamic_fns {
- void *static_state;
- const ERR_FNS *err_fns;
- const CRYPTO_EX_DATA_IMPL *ex_data_fns;
- dynamic_MEM_fns mem_fns;
- dynamic_LOCK_fns lock_fns;
- } dynamic_fns;
-
-/* The version checking function should be of this prototype. NB: The
- * ossl_version value passed in is the OSSL_DYNAMIC_VERSION of the loading code.
- * If this function returns zero, it indicates a (potential) version
+ void *static_state;
+ const ERR_FNS *err_fns;
+ const CRYPTO_EX_DATA_IMPL *ex_data_fns;
+ dynamic_MEM_fns mem_fns;
+ dynamic_LOCK_fns lock_fns;
+} dynamic_fns;
+
+/*
+ * The version checking function should be of this prototype. NB: The
+ * ossl_version value passed in is the OSSL_DYNAMIC_VERSION of the loading
+ * code. If this function returns zero, it indicates a (potential) version
* incompatibility and the loaded library doesn't believe it can proceed.
* Otherwise, the returned value is the (latest) version supported by the
- * loading library. The loader may still decide that the loaded code's version
- * is unsatisfactory and could veto the load. The function is expected to
- * be implemented with the symbol name "v_check", and a default implementation
- * can be fully instantiated with IMPLEMENT_DYNAMIC_CHECK_FN(). */
-typedef unsigned long (*dynamic_v_check_fn)(unsigned long ossl_version);
-#define IMPLEMENT_DYNAMIC_CHECK_FN() \
- OPENSSL_EXPORT unsigned long v_check(unsigned long v); \
- OPENSSL_EXPORT unsigned long v_check(unsigned long v) { \
- if(v >= OSSL_DYNAMIC_OLDEST) return OSSL_DYNAMIC_VERSION; \
- return 0; }
-
-/* This function is passed the ENGINE structure to initialise with its own
+ * loading library. The loader may still decide that the loaded code's
+ * version is unsatisfactory and could veto the load. The function is
+ * expected to be implemented with the symbol name "v_check", and a default
+ * implementation can be fully instantiated with
+ * IMPLEMENT_DYNAMIC_CHECK_FN().
+ */
+typedef unsigned long (*dynamic_v_check_fn) (unsigned long ossl_version);
+# define IMPLEMENT_DYNAMIC_CHECK_FN() \
+ OPENSSL_EXPORT unsigned long v_check(unsigned long v); \
+ OPENSSL_EXPORT unsigned long v_check(unsigned long v) { \
+ if(v >= OSSL_DYNAMIC_OLDEST) return OSSL_DYNAMIC_VERSION; \
+ return 0; }
+
+/*
+ * This function is passed the ENGINE structure to initialise with its own
* function and command settings. It should not adjust the structural or
- * functional reference counts. If this function returns zero, (a) the load will
- * be aborted, (b) the previous ENGINE state will be memcpy'd back onto the
- * structure, and (c) the shared library will be unloaded. So implementations
- * should do their own internal cleanup in failure circumstances otherwise they
- * could leak. The 'id' parameter, if non-NULL, represents the ENGINE id that
- * the loader is looking for. If this is NULL, the shared library can choose to
- * return failure or to initialise a 'default' ENGINE. If non-NULL, the shared
- * library must initialise only an ENGINE matching the passed 'id'. The function
- * is expected to be implemented with the symbol name "bind_engine". A standard
- * implementation can be instantiated with IMPLEMENT_DYNAMIC_BIND_FN(fn) where
- * the parameter 'fn' is a callback function that populates the ENGINE structure
- * and returns an int value (zero for failure). 'fn' should have prototype;
- * [static] int fn(ENGINE *e, const char *id); */
-typedef int (*dynamic_bind_engine)(ENGINE *e, const char *id,
- const dynamic_fns *fns);
-#define IMPLEMENT_DYNAMIC_BIND_FN(fn) \
- OPENSSL_EXPORT \
- int bind_engine(ENGINE *e, const char *id, const dynamic_fns *fns); \
- OPENSSL_EXPORT \
- int bind_engine(ENGINE *e, const char *id, const dynamic_fns *fns) { \
- if(ENGINE_get_static_state() == fns->static_state) goto skip_cbs; \
- if(!CRYPTO_set_mem_functions(fns->mem_fns.malloc_cb, \
- fns->mem_fns.realloc_cb, fns->mem_fns.free_cb)) \
- return 0; \
- CRYPTO_set_locking_callback(fns->lock_fns.lock_locking_cb); \
- CRYPTO_set_add_lock_callback(fns->lock_fns.lock_add_lock_cb); \
- CRYPTO_set_dynlock_create_callback(fns->lock_fns.dynlock_create_cb); \
- CRYPTO_set_dynlock_lock_callback(fns->lock_fns.dynlock_lock_cb); \
- CRYPTO_set_dynlock_destroy_callback(fns->lock_fns.dynlock_destroy_cb); \
- if(!CRYPTO_set_ex_data_implementation(fns->ex_data_fns)) \
- return 0; \
- if(!ERR_set_implementation(fns->err_fns)) return 0; \
- skip_cbs: \
- if(!fn(e,id)) return 0; \
- return 1; }
-
-/* If the loading application (or library) and the loaded ENGINE library share
- * the same static data (eg. they're both dynamically linked to the same
- * libcrypto.so) we need a way to avoid trying to set system callbacks - this
- * would fail, and for the same reason that it's unnecessary to try. If the
- * loaded ENGINE has (or gets from through the loader) its own copy of the
- * libcrypto static data, we will need to set the callbacks. The easiest way to
- * detect this is to have a function that returns a pointer to some static data
- * and let the loading application and loaded ENGINE compare their respective
- * values. */
+ * functional reference counts. If this function returns zero, (a) the load
+ * will be aborted, (b) the previous ENGINE state will be memcpy'd back onto
+ * the structure, and (c) the shared library will be unloaded. So
+ * implementations should do their own internal cleanup in failure
+ * circumstances otherwise they could leak. The 'id' parameter, if non-NULL,
+ * represents the ENGINE id that the loader is looking for. If this is NULL,
+ * the shared library can choose to return failure or to initialise a
+ * 'default' ENGINE. If non-NULL, the shared library must initialise only an
+ * ENGINE matching the passed 'id'. The function is expected to be
+ * implemented with the symbol name "bind_engine". A standard implementation
+ * can be instantiated with IMPLEMENT_DYNAMIC_BIND_FN(fn) where the parameter
+ * 'fn' is a callback function that populates the ENGINE structure and
+ * returns an int value (zero for failure). 'fn' should have prototype;
+ * [static] int fn(ENGINE *e, const char *id);
+ */
+typedef int (*dynamic_bind_engine) (ENGINE *e, const char *id,
+ const dynamic_fns *fns);
+# define IMPLEMENT_DYNAMIC_BIND_FN(fn) \
+ OPENSSL_EXPORT \
+ int bind_engine(ENGINE *e, const char *id, const dynamic_fns *fns); \
+ OPENSSL_EXPORT \
+ int bind_engine(ENGINE *e, const char *id, const dynamic_fns *fns) { \
+ if(ENGINE_get_static_state() == fns->static_state) goto skip_cbs; \
+ if(!CRYPTO_set_mem_functions(fns->mem_fns.malloc_cb, \
+ fns->mem_fns.realloc_cb, fns->mem_fns.free_cb)) \
+ return 0; \
+ CRYPTO_set_locking_callback(fns->lock_fns.lock_locking_cb); \
+ CRYPTO_set_add_lock_callback(fns->lock_fns.lock_add_lock_cb); \
+ CRYPTO_set_dynlock_create_callback(fns->lock_fns.dynlock_create_cb); \
+ CRYPTO_set_dynlock_lock_callback(fns->lock_fns.dynlock_lock_cb); \
+ CRYPTO_set_dynlock_destroy_callback(fns->lock_fns.dynlock_destroy_cb); \
+ if(!CRYPTO_set_ex_data_implementation(fns->ex_data_fns)) \
+ return 0; \
+ if(!ERR_set_implementation(fns->err_fns)) return 0; \
+ skip_cbs: \
+ if(!fn(e,id)) return 0; \
+ return 1; }
+
+/*
+ * If the loading application (or library) and the loaded ENGINE library
+ * share the same static data (eg. they're both dynamically linked to the
+ * same libcrypto.so) we need a way to avoid trying to set system callbacks -
+ * this would fail, and for the same reason that it's unnecessary to try. If
+ * the loaded ENGINE has (or gets from through the loader) its own copy of
+ * the libcrypto static data, we will need to set the callbacks. The easiest
+ * way to detect this is to have a function that returns a pointer to some
+ * static data and let the loading application and loaded ENGINE compare
+ * their respective values.
+ */
void *ENGINE_get_static_state(void);
-#if defined(__OpenBSD__) || defined(__FreeBSD__) || defined(HAVE_CRYPTODEV)
+# if defined(__OpenBSD__) || defined(__FreeBSD__) || defined(HAVE_CRYPTODEV)
void ENGINE_setup_bsd_cryptodev(void);
-#endif
+# endif
/* BEGIN ERROR CODES */
-/* The following lines are auto generated by the script mkerr.pl. Any changes
+/*
+ * The following lines are auto generated by the script mkerr.pl. Any changes
* made after this point may be overwritten when the script is next run.
*/
void ERR_load_ENGINE_strings(void);
@@ -753,88 +871,88 @@ void ERR_load_ENGINE_strings(void);
/* Error codes for the ENGINE functions. */
/* Function codes. */
-#define ENGINE_F_DYNAMIC_CTRL 180
-#define ENGINE_F_DYNAMIC_GET_DATA_CTX 181
-#define ENGINE_F_DYNAMIC_LOAD 182
-#define ENGINE_F_DYNAMIC_SET_DATA_CTX 183
-#define ENGINE_F_ENGINE_ADD 105
-#define ENGINE_F_ENGINE_BY_ID 106
-#define ENGINE_F_ENGINE_CMD_IS_EXECUTABLE 170
-#define ENGINE_F_ENGINE_CTRL 142
-#define ENGINE_F_ENGINE_CTRL_CMD 178
-#define ENGINE_F_ENGINE_CTRL_CMD_STRING 171
-#define ENGINE_F_ENGINE_FINISH 107
-#define ENGINE_F_ENGINE_FREE_UTIL 108
-#define ENGINE_F_ENGINE_GET_CIPHER 185
-#define ENGINE_F_ENGINE_GET_DEFAULT_TYPE 177
-#define ENGINE_F_ENGINE_GET_DIGEST 186
-#define ENGINE_F_ENGINE_GET_NEXT 115
-#define ENGINE_F_ENGINE_GET_PKEY_ASN1_METH 193
-#define ENGINE_F_ENGINE_GET_PKEY_METH 192
-#define ENGINE_F_ENGINE_GET_PREV 116
-#define ENGINE_F_ENGINE_INIT 119
-#define ENGINE_F_ENGINE_LIST_ADD 120
-#define ENGINE_F_ENGINE_LIST_REMOVE 121
-#define ENGINE_F_ENGINE_LOAD_PRIVATE_KEY 150
-#define ENGINE_F_ENGINE_LOAD_PUBLIC_KEY 151
-#define ENGINE_F_ENGINE_LOAD_SSL_CLIENT_CERT 194
-#define ENGINE_F_ENGINE_NEW 122
-#define ENGINE_F_ENGINE_REMOVE 123
-#define ENGINE_F_ENGINE_SET_DEFAULT_STRING 189
-#define ENGINE_F_ENGINE_SET_DEFAULT_TYPE 126
-#define ENGINE_F_ENGINE_SET_ID 129
-#define ENGINE_F_ENGINE_SET_NAME 130
-#define ENGINE_F_ENGINE_TABLE_REGISTER 184
-#define ENGINE_F_ENGINE_UNLOAD_KEY 152
-#define ENGINE_F_ENGINE_UNLOCKED_FINISH 191
-#define ENGINE_F_ENGINE_UP_REF 190
-#define ENGINE_F_INT_CTRL_HELPER 172
-#define ENGINE_F_INT_ENGINE_CONFIGURE 188
-#define ENGINE_F_INT_ENGINE_MODULE_INIT 187
-#define ENGINE_F_LOG_MESSAGE 141
+# define ENGINE_F_DYNAMIC_CTRL 180
+# define ENGINE_F_DYNAMIC_GET_DATA_CTX 181
+# define ENGINE_F_DYNAMIC_LOAD 182
+# define ENGINE_F_DYNAMIC_SET_DATA_CTX 183
+# define ENGINE_F_ENGINE_ADD 105
+# define ENGINE_F_ENGINE_BY_ID 106
+# define ENGINE_F_ENGINE_CMD_IS_EXECUTABLE 170
+# define ENGINE_F_ENGINE_CTRL 142
+# define ENGINE_F_ENGINE_CTRL_CMD 178
+# define ENGINE_F_ENGINE_CTRL_CMD_STRING 171
+# define ENGINE_F_ENGINE_FINISH 107
+# define ENGINE_F_ENGINE_FREE_UTIL 108
+# define ENGINE_F_ENGINE_GET_CIPHER 185
+# define ENGINE_F_ENGINE_GET_DEFAULT_TYPE 177
+# define ENGINE_F_ENGINE_GET_DIGEST 186
+# define ENGINE_F_ENGINE_GET_NEXT 115
+# define ENGINE_F_ENGINE_GET_PKEY_ASN1_METH 193
+# define ENGINE_F_ENGINE_GET_PKEY_METH 192
+# define ENGINE_F_ENGINE_GET_PREV 116
+# define ENGINE_F_ENGINE_INIT 119
+# define ENGINE_F_ENGINE_LIST_ADD 120
+# define ENGINE_F_ENGINE_LIST_REMOVE 121
+# define ENGINE_F_ENGINE_LOAD_PRIVATE_KEY 150
+# define ENGINE_F_ENGINE_LOAD_PUBLIC_KEY 151
+# define ENGINE_F_ENGINE_LOAD_SSL_CLIENT_CERT 194
+# define ENGINE_F_ENGINE_NEW 122
+# define ENGINE_F_ENGINE_REMOVE 123
+# define ENGINE_F_ENGINE_SET_DEFAULT_STRING 189
+# define ENGINE_F_ENGINE_SET_DEFAULT_TYPE 126
+# define ENGINE_F_ENGINE_SET_ID 129
+# define ENGINE_F_ENGINE_SET_NAME 130
+# define ENGINE_F_ENGINE_TABLE_REGISTER 184
+# define ENGINE_F_ENGINE_UNLOAD_KEY 152
+# define ENGINE_F_ENGINE_UNLOCKED_FINISH 191
+# define ENGINE_F_ENGINE_UP_REF 190
+# define ENGINE_F_INT_CTRL_HELPER 172
+# define ENGINE_F_INT_ENGINE_CONFIGURE 188
+# define ENGINE_F_INT_ENGINE_MODULE_INIT 187
+# define ENGINE_F_LOG_MESSAGE 141
/* Reason codes. */
-#define ENGINE_R_ALREADY_LOADED 100
-#define ENGINE_R_ARGUMENT_IS_NOT_A_NUMBER 133
-#define ENGINE_R_CMD_NOT_EXECUTABLE 134
-#define ENGINE_R_COMMAND_TAKES_INPUT 135
-#define ENGINE_R_COMMAND_TAKES_NO_INPUT 136
-#define ENGINE_R_CONFLICTING_ENGINE_ID 103
-#define ENGINE_R_CTRL_COMMAND_NOT_IMPLEMENTED 119
-#define ENGINE_R_DH_NOT_IMPLEMENTED 139
-#define ENGINE_R_DSA_NOT_IMPLEMENTED 140
-#define ENGINE_R_DSO_FAILURE 104
-#define ENGINE_R_DSO_NOT_FOUND 132
-#define ENGINE_R_ENGINES_SECTION_ERROR 148
-#define ENGINE_R_ENGINE_CONFIGURATION_ERROR 102
-#define ENGINE_R_ENGINE_IS_NOT_IN_LIST 105
-#define ENGINE_R_ENGINE_SECTION_ERROR 149
-#define ENGINE_R_FAILED_LOADING_PRIVATE_KEY 128
-#define ENGINE_R_FAILED_LOADING_PUBLIC_KEY 129
-#define ENGINE_R_FINISH_FAILED 106
-#define ENGINE_R_GET_HANDLE_FAILED 107
-#define ENGINE_R_ID_OR_NAME_MISSING 108
-#define ENGINE_R_INIT_FAILED 109
-#define ENGINE_R_INTERNAL_LIST_ERROR 110
-#define ENGINE_R_INVALID_ARGUMENT 143
-#define ENGINE_R_INVALID_CMD_NAME 137
-#define ENGINE_R_INVALID_CMD_NUMBER 138
-#define ENGINE_R_INVALID_INIT_VALUE 151
-#define ENGINE_R_INVALID_STRING 150
-#define ENGINE_R_NOT_INITIALISED 117
-#define ENGINE_R_NOT_LOADED 112
-#define ENGINE_R_NO_CONTROL_FUNCTION 120
-#define ENGINE_R_NO_INDEX 144
-#define ENGINE_R_NO_LOAD_FUNCTION 125
-#define ENGINE_R_NO_REFERENCE 130
-#define ENGINE_R_NO_SUCH_ENGINE 116
-#define ENGINE_R_NO_UNLOAD_FUNCTION 126
-#define ENGINE_R_PROVIDE_PARAMETERS 113
-#define ENGINE_R_RSA_NOT_IMPLEMENTED 141
-#define ENGINE_R_UNIMPLEMENTED_CIPHER 146
-#define ENGINE_R_UNIMPLEMENTED_DIGEST 147
-#define ENGINE_R_UNIMPLEMENTED_PUBLIC_KEY_METHOD 101
-#define ENGINE_R_VERSION_INCOMPATIBILITY 145
+# define ENGINE_R_ALREADY_LOADED 100
+# define ENGINE_R_ARGUMENT_IS_NOT_A_NUMBER 133
+# define ENGINE_R_CMD_NOT_EXECUTABLE 134
+# define ENGINE_R_COMMAND_TAKES_INPUT 135
+# define ENGINE_R_COMMAND_TAKES_NO_INPUT 136
+# define ENGINE_R_CONFLICTING_ENGINE_ID 103
+# define ENGINE_R_CTRL_COMMAND_NOT_IMPLEMENTED 119
+# define ENGINE_R_DH_NOT_IMPLEMENTED 139
+# define ENGINE_R_DSA_NOT_IMPLEMENTED 140
+# define ENGINE_R_DSO_FAILURE 104
+# define ENGINE_R_DSO_NOT_FOUND 132
+# define ENGINE_R_ENGINES_SECTION_ERROR 148
+# define ENGINE_R_ENGINE_CONFIGURATION_ERROR 102
+# define ENGINE_R_ENGINE_IS_NOT_IN_LIST 105
+# define ENGINE_R_ENGINE_SECTION_ERROR 149
+# define ENGINE_R_FAILED_LOADING_PRIVATE_KEY 128
+# define ENGINE_R_FAILED_LOADING_PUBLIC_KEY 129
+# define ENGINE_R_FINISH_FAILED 106
+# define ENGINE_R_GET_HANDLE_FAILED 107
+# define ENGINE_R_ID_OR_NAME_MISSING 108
+# define ENGINE_R_INIT_FAILED 109
+# define ENGINE_R_INTERNAL_LIST_ERROR 110
+# define ENGINE_R_INVALID_ARGUMENT 143
+# define ENGINE_R_INVALID_CMD_NAME 137
+# define ENGINE_R_INVALID_CMD_NUMBER 138
+# define ENGINE_R_INVALID_INIT_VALUE 151
+# define ENGINE_R_INVALID_STRING 150
+# define ENGINE_R_NOT_INITIALISED 117
+# define ENGINE_R_NOT_LOADED 112
+# define ENGINE_R_NO_CONTROL_FUNCTION 120
+# define ENGINE_R_NO_INDEX 144
+# define ENGINE_R_NO_LOAD_FUNCTION 125
+# define ENGINE_R_NO_REFERENCE 130
+# define ENGINE_R_NO_SUCH_ENGINE 116
+# define ENGINE_R_NO_UNLOAD_FUNCTION 126
+# define ENGINE_R_PROVIDE_PARAMETERS 113
+# define ENGINE_R_RSA_NOT_IMPLEMENTED 141
+# define ENGINE_R_UNIMPLEMENTED_CIPHER 146
+# define ENGINE_R_UNIMPLEMENTED_DIGEST 147
+# define ENGINE_R_UNIMPLEMENTED_PUBLIC_KEY_METHOD 101
+# define ENGINE_R_VERSION_INCOMPATIBILITY 145
#ifdef __cplusplus
}