1 files changed, 833 insertions, 833 deletions
diff --git a/openssl/crypto/engine/engine.h b/openssl/crypto/engine/engine.h
index c24e26d4c..943aeae21 100644
--- a/openssl/crypto/engine/engine.h
+++ b/openssl/crypto/engine/engine.h
@@ -1,833 +1,833 @@
-/* openssl/engine.h */
-/* Written by Geoff Thorpe (geoff@geoffthorpe.net) for the OpenSSL
- * project 2000.
- */
-/* ====================================================================
- * Copyright (c) 1999-2004 The OpenSSL Project.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer. 
- *
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- *
- * 3. All advertising materials mentioning features or use of this
- *    software must display the following acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit. (http://www.OpenSSL.org/)"
- *
- * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to
- *    endorse or promote products derived from this software without
- *    prior written permission. For written permission, please contact
- *    licensing@OpenSSL.org.
- *
- * 5. Products derived from this software may not be called "OpenSSL"
- *    nor may "OpenSSL" appear in their names without prior written
- *    permission of the OpenSSL Project.
- *
- * 6. Redistributions of any form whatsoever must retain the following
- *    acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit (http://www.OpenSSL.org/)"
- *
- * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY
- * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE OpenSSL PROJECT OR
- * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
- * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
- * OF THE POSSIBILITY OF SUCH DAMAGE.
- * ====================================================================
- *
- * This product includes cryptographic software written by Eric Young
- * (eay@cryptsoft.com).  This product includes software written by Tim
- * Hudson (tjh@cryptsoft.com).
- *
- */
-/* ====================================================================
- * Copyright 2002 Sun Microsystems, Inc. ALL RIGHTS RESERVED.
- * ECDH support in OpenSSL originally developed by 
- * SUN MICROSYSTEMS, INC., and contributed to the OpenSSL project.
- */
-
-#ifndef HEADER_ENGINE_H
-#define HEADER_ENGINE_H
-
-#include <openssl/opensslconf.h>
-
-#ifdef OPENSSL_NO_ENGINE
-#error ENGINE is disabled.
-#endif
-
-#ifndef OPENSSL_NO_DEPRECATED
-#include <openssl/bn.h>
-#ifndef OPENSSL_NO_RSA
-#include <openssl/rsa.h>
-#endif
-#ifndef OPENSSL_NO_DSA
-#include <openssl/dsa.h>
-#endif
-#ifndef OPENSSL_NO_DH
-#include <openssl/dh.h>
-#endif
-#ifndef OPENSSL_NO_ECDH
-#include <openssl/ecdh.h>
-#endif
-#ifndef OPENSSL_NO_ECDSA
-#include <openssl/ecdsa.h>
-#endif
-#include <openssl/rand.h>
-#include <openssl/ui.h>
-#include <openssl/err.h>
-#endif
-
-#include <openssl/ossl_typ.h>
-#include <openssl/symhacks.h>
-
-#include <openssl/x509.h>
-
-#ifdef  __cplusplus
-extern "C" {
-#endif
-
-/* These flags are used to control combinations of algorithm (methods)
- * by bitwise "OR"ing. */
-#define ENGINE_METHOD_RSA		(unsigned int)0x0001
-#define ENGINE_METHOD_DSA		(unsigned int)0x0002
-#define ENGINE_METHOD_DH		(unsigned int)0x0004
-#define ENGINE_METHOD_RAND		(unsigned int)0x0008
-#define ENGINE_METHOD_ECDH		(unsigned int)0x0010
-#define ENGINE_METHOD_ECDSA		(unsigned int)0x0020
-#define ENGINE_METHOD_CIPHERS		(unsigned int)0x0040
-#define ENGINE_METHOD_DIGESTS		(unsigned int)0x0080
-#define ENGINE_METHOD_STORE		(unsigned int)0x0100
-#define ENGINE_METHOD_PKEY_METHS	(unsigned int)0x0200
-#define ENGINE_METHOD_PKEY_ASN1_METHS	(unsigned int)0x0400
-/* Obvious all-or-nothing cases. */
-#define ENGINE_METHOD_ALL		(unsigned int)0xFFFF
-#define ENGINE_METHOD_NONE		(unsigned int)0x0000
-
-/* This(ese) flag(s) controls behaviour of the ENGINE_TABLE mechanism used
- * internally to control registration of ENGINE implementations, and can be set
- * by ENGINE_set_table_flags(). The "NOINIT" flag prevents attempts to
- * initialise registered ENGINEs if they are not already initialised. */
-#define ENGINE_TABLE_FLAG_NOINIT	(unsigned int)0x0001
-
-/* ENGINE flags that can be set by ENGINE_set_flags(). */
-/* #define ENGINE_FLAGS_MALLOCED	0x0001 */ /* Not used */
-
-/* This flag is for ENGINEs that wish to handle the various 'CMD'-related
- * control commands on their own. Without this flag, ENGINE_ctrl() handles these
- * control commands on behalf of the ENGINE using their "cmd_defns" data. */
-#define ENGINE_FLAGS_MANUAL_CMD_CTRL	(int)0x0002
-
-/* This flag is for ENGINEs who return new duplicate structures when found via
- * "ENGINE_by_id()". When an ENGINE must store state (eg. if ENGINE_ctrl()
- * commands are called in sequence as part of some stateful process like
- * key-generation setup and execution), it can set this flag - then each attempt
- * to obtain the ENGINE will result in it being copied into a new structure.
- * Normally, ENGINEs don't declare this flag so ENGINE_by_id() just increments
- * the existing ENGINE's structural reference count. */
-#define ENGINE_FLAGS_BY_ID_COPY		(int)0x0004
-
-/* ENGINEs can support their own command types, and these flags are used in
- * ENGINE_CTRL_GET_CMD_FLAGS to indicate to the caller what kind of input each
- * command expects. Currently only numeric and string input is supported. If a
- * control command supports none of the _NUMERIC, _STRING, or _NO_INPUT options,
- * then it is regarded as an "internal" control command - and not for use in
- * config setting situations. As such, they're not available to the
- * ENGINE_ctrl_cmd_string() function, only raw ENGINE_ctrl() access. Changes to
- * this list of 'command types' should be reflected carefully in
- * ENGINE_cmd_is_executable() and ENGINE_ctrl_cmd_string(). */
-
-/* accepts a 'long' input value (3rd parameter to ENGINE_ctrl) */
-#define ENGINE_CMD_FLAG_NUMERIC		(unsigned int)0x0001
-/* accepts string input (cast from 'void*' to 'const char *', 4th parameter to
- * ENGINE_ctrl) */
-#define ENGINE_CMD_FLAG_STRING		(unsigned int)0x0002
-/* Indicates that the control command takes *no* input. Ie. the control command
- * is unparameterised. */
-#define ENGINE_CMD_FLAG_NO_INPUT	(unsigned int)0x0004
-/* Indicates that the control command is internal. This control command won't
- * be shown in any output, and is only usable through the ENGINE_ctrl_cmd()
- * function. */
-#define ENGINE_CMD_FLAG_INTERNAL	(unsigned int)0x0008
-
-/* NB: These 3 control commands are deprecated and should not be used. ENGINEs
- * relying on these commands should compile conditional support for
- * compatibility (eg. if these symbols are defined) but should also migrate the
- * same functionality to their own ENGINE-specific control functions that can be
- * "discovered" by calling applications. The fact these control commands
- * wouldn't be "executable" (ie. usable by text-based config) doesn't change the
- * fact that application code can find and use them without requiring per-ENGINE
- * hacking. */
-
-/* These flags are used to tell the ctrl function what should be done.
- * All command numbers are shared between all engines, even if some don't
- * make sense to some engines.  In such a case, they do nothing but return
- * the error ENGINE_R_CTRL_COMMAND_NOT_IMPLEMENTED. */
-#define ENGINE_CTRL_SET_LOGSTREAM		1
-#define ENGINE_CTRL_SET_PASSWORD_CALLBACK	2
-#define ENGINE_CTRL_HUP				3 /* Close and reinitialise any
-						     handles/connections etc. */
-#define ENGINE_CTRL_SET_USER_INTERFACE          4 /* Alternative to callback */
-#define ENGINE_CTRL_SET_CALLBACK_DATA           5 /* User-specific data, used
-						     when calling the password
-						     callback and the user
-						     interface */
-#define ENGINE_CTRL_LOAD_CONFIGURATION		6 /* Load a configuration, given
-						     a string that represents a
-						     file name or so */
-#define ENGINE_CTRL_LOAD_SECTION		7 /* Load data from a given
-						     section in the already loaded
-						     configuration */
-
-/* These control commands allow an application to deal with an arbitrary engine
- * in a dynamic way. Warn: Negative return values indicate errors FOR THESE
- * COMMANDS because zero is used to indicate 'end-of-list'. Other commands,
- * including ENGINE-specific command types, return zero for an error.
- *
- * An ENGINE can choose to implement these ctrl functions, and can internally
- * manage things however it chooses - it does so by setting the
- * ENGINE_FLAGS_MANUAL_CMD_CTRL flag (using ENGINE_set_flags()). Otherwise the
- * ENGINE_ctrl() code handles this on the ENGINE's behalf using the cmd_defns
- * data (set using ENGINE_set_cmd_defns()). This means an ENGINE's ctrl()
- * handler need only implement its own commands - the above "meta" commands will
- * be taken care of. */
-
-/* Returns non-zero if the supplied ENGINE has a ctrl() handler. If "not", then
- * all the remaining control commands will return failure, so it is worth
- * checking this first if the caller is trying to "discover" the engine's
- * capabilities and doesn't want errors generated unnecessarily. */
-#define ENGINE_CTRL_HAS_CTRL_FUNCTION		10
-/* Returns a positive command number for the first command supported by the
- * engine. Returns zero if no ctrl commands are supported. */
-#define ENGINE_CTRL_GET_FIRST_CMD_TYPE		11
-/* The 'long' argument specifies a command implemented by the engine, and the
- * return value is the next command supported, or zero if there are no more. */
-#define ENGINE_CTRL_GET_NEXT_CMD_TYPE		12
-/* The 'void*' argument is a command name (cast from 'const char *'), and the
- * return value is the command that corresponds to it. */
-#define ENGINE_CTRL_GET_CMD_FROM_NAME		13
-/* The next two allow a command to be converted into its corresponding string
- * form. In each case, the 'long' argument supplies the command. In the NAME_LEN
- * case, the return value is the length of the command name (not counting a
- * trailing EOL). In the NAME case, the 'void*' argument must be a string buffer
- * large enough, and it will be populated with the name of the command (WITH a
- * trailing EOL). */
-#define ENGINE_CTRL_GET_NAME_LEN_FROM_CMD	14
-#define ENGINE_CTRL_GET_NAME_FROM_CMD		15
-/* The next two are similar but give a "short description" of a command. */
-#define ENGINE_CTRL_GET_DESC_LEN_FROM_CMD	16
-#define ENGINE_CTRL_GET_DESC_FROM_CMD		17
-/* With this command, the return value is the OR'd combination of
- * ENGINE_CMD_FLAG_*** values that indicate what kind of input a given
- * engine-specific ctrl command expects. */
-#define ENGINE_CTRL_GET_CMD_FLAGS		18
-
-/* ENGINE implementations should start the numbering of their own control
- * commands from this value. (ie. ENGINE_CMD_BASE, ENGINE_CMD_BASE + 1, etc). */
-#define ENGINE_CMD_BASE				200
-
-/* NB: These 2 nCipher "chil" control commands are deprecated, and their
- * functionality is now available through ENGINE-specific control commands
- * (exposed through the above-mentioned 'CMD'-handling). Code using these 2
- * commands should be migrated to the more general command handling before these
- * are removed. */
-
-/* Flags specific to the nCipher "chil" engine */
-#define ENGINE_CTRL_CHIL_SET_FORKCHECK		100
-	/* Depending on the value of the (long)i argument, this sets or
-	 * unsets the SimpleForkCheck flag in the CHIL API to enable or
-	 * disable checking and workarounds for applications that fork().
-	 */
-#define ENGINE_CTRL_CHIL_NO_LOCKING		101
-	/* This prevents the initialisation function from providing mutex
-	 * callbacks to the nCipher library. */
-
-/* If an ENGINE supports its own specific control commands and wishes the
- * framework to handle the above 'ENGINE_CMD_***'-manipulation commands on its
- * behalf, it should supply a null-terminated array of ENGINE_CMD_DEFN entries
- * to ENGINE_set_cmd_defns(). It should also implement a ctrl() handler that
- * supports the stated commands (ie. the "cmd_num" entries as described by the
- * array). NB: The array must be ordered in increasing order of cmd_num.
- * "null-terminated" means that the last ENGINE_CMD_DEFN element has cmd_num set
- * to zero and/or cmd_name set to NULL. */
-typedef struct ENGINE_CMD_DEFN_st
-	{
-	unsigned int cmd_num; /* The command number */
-	const char *cmd_name; /* The command name itself */
-	const char *cmd_desc; /* A short description of the command */
-	unsigned int cmd_flags; /* The input the command expects */
-	} ENGINE_CMD_DEFN;
-
-/* Generic function pointer */
-typedef int (*ENGINE_GEN_FUNC_PTR)(void);
-/* Generic function pointer taking no arguments */
-typedef int (*ENGINE_GEN_INT_FUNC_PTR)(ENGINE *);
-/* Specific control function pointer */
-typedef int (*ENGINE_CTRL_FUNC_PTR)(ENGINE *, int, long, void *, void (*f)(void));
-/* Generic load_key function pointer */
-typedef EVP_PKEY * (*ENGINE_LOAD_KEY_PTR)(ENGINE *, const char *,
-	UI_METHOD *ui_method, void *callback_data);
-typedef int (*ENGINE_SSL_CLIENT_CERT_PTR)(ENGINE *, SSL *ssl,
-	STACK_OF(X509_NAME) *ca_dn, X509 **pcert, EVP_PKEY **pkey,
-	STACK_OF(X509) **pother, UI_METHOD *ui_method, void *callback_data);
-/* These callback types are for an ENGINE's handler for cipher and digest logic.
- * These handlers have these prototypes;
- *   int foo(ENGINE *e, const EVP_CIPHER **cipher, const int **nids, int nid);
- *   int foo(ENGINE *e, const EVP_MD **digest, const int **nids, int nid);
- * Looking at how to implement these handlers in the case of cipher support, if
- * the framework wants the EVP_CIPHER for 'nid', it will call;
- *   foo(e, &p_evp_cipher, NULL, nid);    (return zero for failure)
- * If the framework wants a list of supported 'nid's, it will call;
- *   foo(e, NULL, &p_nids, 0); (returns number of 'nids' or -1 for error)
- */
-/* Returns to a pointer to the array of supported cipher 'nid's. If the second
- * parameter is non-NULL it is set to the size of the returned array. */
-typedef int (*ENGINE_CIPHERS_PTR)(ENGINE *, const EVP_CIPHER **, const int **, int);
-typedef int (*ENGINE_DIGESTS_PTR)(ENGINE *, const EVP_MD **, const int **, int);
-typedef int (*ENGINE_PKEY_METHS_PTR)(ENGINE *, EVP_PKEY_METHOD **, const int **, int);
-typedef int (*ENGINE_PKEY_ASN1_METHS_PTR)(ENGINE *, EVP_PKEY_ASN1_METHOD **, const int **, int);
-/* STRUCTURE functions ... all of these functions deal with pointers to ENGINE
- * structures where the pointers have a "structural reference". This means that
- * their reference is to allowed access to the structure but it does not imply
- * that the structure is functional. To simply increment or decrement the
- * structural reference count, use ENGINE_by_id and ENGINE_free. NB: This is not
- * required when iterating using ENGINE_get_next as it will automatically
- * decrement the structural reference count of the "current" ENGINE and
- * increment the structural reference count of the ENGINE it returns (unless it
- * is NULL). */
-
-/* Get the first/last "ENGINE" type available. */
-ENGINE *ENGINE_get_first(void);
-ENGINE *ENGINE_get_last(void);
-/* Iterate to the next/previous "ENGINE" type (NULL = end of the list). */
-ENGINE *ENGINE_get_next(ENGINE *e);
-ENGINE *ENGINE_get_prev(ENGINE *e);
-/* Add another "ENGINE" type into the array. */
-int ENGINE_add(ENGINE *e);
-/* Remove an existing "ENGINE" type from the array. */
-int ENGINE_remove(ENGINE *e);
-/* Retrieve an engine from the list by its unique "id" value. */
-ENGINE *ENGINE_by_id(const char *id);
-/* Add all the built-in engines. */
-void ENGINE_load_openssl(void);
-void ENGINE_load_dynamic(void);
-#ifndef OPENSSL_NO_STATIC_ENGINE
-void ENGINE_load_4758cca(void);
-void ENGINE_load_aep(void);
-void ENGINE_load_atalla(void);
-void ENGINE_load_chil(void);
-void ENGINE_load_cswift(void);
-void ENGINE_load_nuron(void);
-void ENGINE_load_sureware(void);
-void ENGINE_load_ubsec(void);
-void ENGINE_load_padlock(void);
-void ENGINE_load_capi(void);
-#ifndef OPENSSL_NO_GMP
-void ENGINE_load_gmp(void);
-#endif
-#ifndef OPENSSL_NO_GOST
-void ENGINE_load_gost(void);
-#endif
-#endif
-void ENGINE_load_cryptodev(void);
-void ENGINE_load_builtin_engines(void);
-
-/* Get and set global flags (ENGINE_TABLE_FLAG_***) for the implementation
- * "registry" handling. */
-unsigned int ENGINE_get_table_flags(void);
-void ENGINE_set_table_flags(unsigned int flags);
-
-/* Manage registration of ENGINEs per "table". For each type, there are 3
- * functions;
- *   ENGINE_register_***(e) - registers the implementation from 'e' (if it has one)
- *   ENGINE_unregister_***(e) - unregister the implementation from 'e'
- *   ENGINE_register_all_***() - call ENGINE_register_***() for each 'e' in the list
- * Cleanup is automatically registered from each table when required, so
- * ENGINE_cleanup() will reverse any "register" operations. */
-
-int ENGINE_register_RSA(ENGINE *e);
-void ENGINE_unregister_RSA(ENGINE *e);
-void ENGINE_register_all_RSA(void);
-
-int ENGINE_register_DSA(ENGINE *e);
-void ENGINE_unregister_DSA(ENGINE *e);
-void ENGINE_register_all_DSA(void);
-
-int ENGINE_register_ECDH(ENGINE *e);
-void ENGINE_unregister_ECDH(ENGINE *e);
-void ENGINE_register_all_ECDH(void);
-
-int ENGINE_register_ECDSA(ENGINE *e);
-void ENGINE_unregister_ECDSA(ENGINE *e);
-void ENGINE_register_all_ECDSA(void);
-
-int ENGINE_register_DH(ENGINE *e);
-void ENGINE_unregister_DH(ENGINE *e);
-void ENGINE_register_all_DH(void);
-
-int ENGINE_register_RAND(ENGINE *e);
-void ENGINE_unregister_RAND(ENGINE *e);
-void ENGINE_register_all_RAND(void);
-
-int ENGINE_register_STORE(ENGINE *e);
-void ENGINE_unregister_STORE(ENGINE *e);
-void ENGINE_register_all_STORE(void);
-
-int ENGINE_register_ciphers(ENGINE *e);
-void ENGINE_unregister_ciphers(ENGINE *e);
-void ENGINE_register_all_ciphers(void);
-
-int ENGINE_register_digests(ENGINE *e);
-void ENGINE_unregister_digests(ENGINE *e);
-void ENGINE_register_all_digests(void);
-
-int ENGINE_register_pkey_meths(ENGINE *e);
-void ENGINE_unregister_pkey_meths(ENGINE *e);
-void ENGINE_register_all_pkey_meths(void);
-
-int ENGINE_register_pkey_asn1_meths(ENGINE *e);
-void ENGINE_unregister_pkey_asn1_meths(ENGINE *e);
-void ENGINE_register_all_pkey_asn1_meths(void);
-
-/* These functions register all support from the above categories. Note, use of
- * these functions can result in static linkage of code your application may not
- * need. If you only need a subset of functionality, consider using more
- * selective initialisation. */
-int ENGINE_register_complete(ENGINE *e);
-int ENGINE_register_all_complete(void);
-
-/* Send parametrised control commands to the engine. The possibilities to send
- * down an integer, a pointer to data or a function pointer are provided. Any of
- * the parameters may or may not be NULL, depending on the command number. In
- * actuality, this function only requires a structural (rather than functional)
- * reference to an engine, but many control commands may require the engine be
- * functional. The caller should be aware of trying commands that require an
- * operational ENGINE, and only use functional references in such situations. */
-int ENGINE_ctrl(ENGINE *e, int cmd, long i, void *p, void (*f)(void));
-
-/* This function tests if an ENGINE-specific command is usable as a "setting".
- * Eg. in an application's config file that gets processed through
- * ENGINE_ctrl_cmd_string(). If this returns zero, it is not available to
- * ENGINE_ctrl_cmd_string(), only ENGINE_ctrl(). */
-int ENGINE_cmd_is_executable(ENGINE *e, int cmd);
-
-/* This function works like ENGINE_ctrl() with the exception of taking a
- * command name instead of a command number, and can handle optional commands.
- * See the comment on ENGINE_ctrl_cmd_string() for an explanation on how to
- * use the cmd_name and cmd_optional. */
-int ENGINE_ctrl_cmd(ENGINE *e, const char *cmd_name,
-        long i, void *p, void (*f)(void), int cmd_optional);
-
-/* This function passes a command-name and argument to an ENGINE. The cmd_name
- * is converted to a command number and the control command is called using
- * 'arg' as an argument (unless the ENGINE doesn't support such a command, in
- * which case no control command is called). The command is checked for input
- * flags, and if necessary the argument will be converted to a numeric value. If
- * cmd_optional is non-zero, then if the ENGINE doesn't support the given
- * cmd_name the return value will be success anyway. This function is intended
- * for applications to use so that users (or config files) can supply
- * engine-specific config data to the ENGINE at run-time to control behaviour of
- * specific engines. As such, it shouldn't be used for calling ENGINE_ctrl()
- * functions that return data, deal with binary data, or that are otherwise
- * supposed to be used directly through ENGINE_ctrl() in application code. Any
- * "return" data from an ENGINE_ctrl() operation in this function will be lost -
- * the return value is interpreted as failure if the return value is zero,
- * success otherwise, and this function returns a boolean value as a result. In
- * other words, vendors of 'ENGINE'-enabled devices should write ENGINE
- * implementations with parameterisations that work in this scheme, so that
- * compliant ENGINE-based applications can work consistently with the same
- * configuration for the same ENGINE-enabled devices, across applications. */
-int ENGINE_ctrl_cmd_string(ENGINE *e, const char *cmd_name, const char *arg,
-				int cmd_optional);
-
-/* These functions are useful for manufacturing new ENGINE structures. They
- * don't address reference counting at all - one uses them to populate an ENGINE
- * structure with personalised implementations of things prior to using it
- * directly or adding it to the builtin ENGINE list in OpenSSL. These are also
- * here so that the ENGINE structure doesn't have to be exposed and break binary
- * compatibility! */
-ENGINE *ENGINE_new(void);
-int ENGINE_free(ENGINE *e);
-int ENGINE_up_ref(ENGINE *e);
-int ENGINE_set_id(ENGINE *e, const char *id);
-int ENGINE_set_name(ENGINE *e, const char *name);
-int ENGINE_set_RSA(ENGINE *e, const RSA_METHOD *rsa_meth);
-int ENGINE_set_DSA(ENGINE *e, const DSA_METHOD *dsa_meth);
-int ENGINE_set_ECDH(ENGINE *e, const ECDH_METHOD *ecdh_meth);
-int ENGINE_set_ECDSA(ENGINE *e, const ECDSA_METHOD *ecdsa_meth);
-int ENGINE_set_DH(ENGINE *e, const DH_METHOD *dh_meth);
-int ENGINE_set_RAND(ENGINE *e, const RAND_METHOD *rand_meth);
-int ENGINE_set_STORE(ENGINE *e, const STORE_METHOD *store_meth);
-int ENGINE_set_destroy_function(ENGINE *e, ENGINE_GEN_INT_FUNC_PTR destroy_f);
-int ENGINE_set_init_function(ENGINE *e, ENGINE_GEN_INT_FUNC_PTR init_f);
-int ENGINE_set_finish_function(ENGINE *e, ENGINE_GEN_INT_FUNC_PTR finish_f);
-int ENGINE_set_ctrl_function(ENGINE *e, ENGINE_CTRL_FUNC_PTR ctrl_f);
-int ENGINE_set_load_privkey_function(ENGINE *e, ENGINE_LOAD_KEY_PTR loadpriv_f);
-int ENGINE_set_load_pubkey_function(ENGINE *e, ENGINE_LOAD_KEY_PTR loadpub_f);
-int ENGINE_set_load_ssl_client_cert_function(ENGINE *e,
-				ENGINE_SSL_CLIENT_CERT_PTR loadssl_f);
-int ENGINE_set_ciphers(ENGINE *e, ENGINE_CIPHERS_PTR f);
-int ENGINE_set_digests(ENGINE *e, ENGINE_DIGESTS_PTR f);
-int ENGINE_set_pkey_meths(ENGINE *e, ENGINE_PKEY_METHS_PTR f);
-int ENGINE_set_pkey_asn1_meths(ENGINE *e, ENGINE_PKEY_ASN1_METHS_PTR f);
-int ENGINE_set_flags(ENGINE *e, int flags);
-int ENGINE_set_cmd_defns(ENGINE *e, const ENGINE_CMD_DEFN *defns);
-/* These functions allow control over any per-structure ENGINE data. */
-int ENGINE_get_ex_new_index(long argl, void *argp, CRYPTO_EX_new *new_func,
-		CRYPTO_EX_dup *dup_func, CRYPTO_EX_free *free_func);
-int ENGINE_set_ex_data(ENGINE *e, int idx, void *arg);
-void *ENGINE_get_ex_data(const ENGINE *e, int idx);
-
-/* This function cleans up anything that needs it. Eg. the ENGINE_add() function
- * automatically ensures the list cleanup function is registered to be called
- * from ENGINE_cleanup(). Similarly, all ENGINE_register_*** functions ensure
- * ENGINE_cleanup() will clean up after them. */
-void ENGINE_cleanup(void);
-
-/* These return values from within the ENGINE structure. These can be useful
- * with functional references as well as structural references - it depends
- * which you obtained. Using the result for functional purposes if you only
- * obtained a structural reference may be problematic! */
-const char *ENGINE_get_id(const ENGINE *e);
-const char *ENGINE_get_name(const ENGINE *e);
-const RSA_METHOD *ENGINE_get_RSA(const ENGINE *e);
-const DSA_METHOD *ENGINE_get_DSA(const ENGINE *e);
-const ECDH_METHOD *ENGINE_get_ECDH(const ENGINE *e);
-const ECDSA_METHOD *ENGINE_get_ECDSA(const ENGINE *e);
-const DH_METHOD *ENGINE_get_DH(const ENGINE *e);
-const RAND_METHOD *ENGINE_get_RAND(const ENGINE *e);
-const STORE_METHOD *ENGINE_get_STORE(const ENGINE *e);
-ENGINE_GEN_INT_FUNC_PTR ENGINE_get_destroy_function(const ENGINE *e);
-ENGINE_GEN_INT_FUNC_PTR ENGINE_get_init_function(const ENGINE *e);
-ENGINE_GEN_INT_FUNC_PTR ENGINE_get_finish_function(const ENGINE *e);
-ENGINE_CTRL_FUNC_PTR ENGINE_get_ctrl_function(const ENGINE *e);
-ENGINE_LOAD_KEY_PTR ENGINE_get_load_privkey_function(const ENGINE *e);
-ENGINE_LOAD_KEY_PTR ENGINE_get_load_pubkey_function(const ENGINE *e);
-ENGINE_SSL_CLIENT_CERT_PTR ENGINE_get_ssl_client_cert_function(const ENGINE *e);
-ENGINE_CIPHERS_PTR ENGINE_get_ciphers(const ENGINE *e);
-ENGINE_DIGESTS_PTR ENGINE_get_digests(const ENGINE *e);
-ENGINE_PKEY_METHS_PTR ENGINE_get_pkey_meths(const ENGINE *e);
-ENGINE_PKEY_ASN1_METHS_PTR ENGINE_get_pkey_asn1_meths(const ENGINE *e);
-const EVP_CIPHER *ENGINE_get_cipher(ENGINE *e, int nid);
-const EVP_MD *ENGINE_get_digest(ENGINE *e, int nid);
-const EVP_PKEY_METHOD *ENGINE_get_pkey_meth(ENGINE *e, int nid);
-const EVP_PKEY_ASN1_METHOD *ENGINE_get_pkey_asn1_meth(ENGINE *e, int nid);
-const EVP_PKEY_ASN1_METHOD *ENGINE_get_pkey_asn1_meth_str(ENGINE *e,
-					const char *str, int len);
-const EVP_PKEY_ASN1_METHOD *ENGINE_pkey_asn1_find_str(ENGINE **pe,
-					const char *str, int len);
-const ENGINE_CMD_DEFN *ENGINE_get_cmd_defns(const ENGINE *e);
-int ENGINE_get_flags(const ENGINE *e);
-
-/* FUNCTIONAL functions. These functions deal with ENGINE structures
- * that have (or will) be initialised for use. Broadly speaking, the
- * structural functions are useful for iterating the list of available
- * engine types, creating new engine types, and other "list" operations.
- * These functions actually deal with ENGINEs that are to be used. As
- * such these functions can fail (if applicable) when particular
- * engines are unavailable - eg. if a hardware accelerator is not
- * attached or not functioning correctly. Each ENGINE has 2 reference
- * counts; structural and functional. Every time a functional reference
- * is obtained or released, a corresponding structural reference is
- * automatically obtained or released too. */
-
-/* Initialise a engine type for use (or up its reference count if it's
- * already in use). This will fail if the engine is not currently
- * operational and cannot initialise. */
-int ENGINE_init(ENGINE *e);
-/* Free a functional reference to a engine type. This does not require
- * a corresponding call to ENGINE_free as it also releases a structural
- * reference. */
-int ENGINE_finish(ENGINE *e);
-
-/* The following functions handle keys that are stored in some secondary
- * location, handled by the engine.  The storage may be on a card or
- * whatever. */
-EVP_PKEY *ENGINE_load_private_key(ENGINE *e, const char *key_id,
-	UI_METHOD *ui_method, void *callback_data);
-EVP_PKEY *ENGINE_load_public_key(ENGINE *e, const char *key_id,
-	UI_METHOD *ui_method, void *callback_data);
-int ENGINE_load_ssl_client_cert(ENGINE *e, SSL *s,
-	STACK_OF(X509_NAME) *ca_dn, X509 **pcert, EVP_PKEY **ppkey,
-	STACK_OF(X509) **pother,
-	UI_METHOD *ui_method, void *callback_data);
-
-/* This returns a pointer for the current ENGINE structure that
- * is (by default) performing any RSA operations. The value returned
- * is an incremented reference, so it should be free'd (ENGINE_finish)
- * before it is discarded. */
-ENGINE *ENGINE_get_default_RSA(void);
-/* Same for the other "methods" */
-ENGINE *ENGINE_get_default_DSA(void);
-ENGINE *ENGINE_get_default_ECDH(void);
-ENGINE *ENGINE_get_default_ECDSA(void);
-ENGINE *ENGINE_get_default_DH(void);
-ENGINE *ENGINE_get_default_RAND(void);
-/* These functions can be used to get a functional reference to perform
- * ciphering or digesting corresponding to "nid". */
-ENGINE *ENGINE_get_cipher_engine(int nid);
-ENGINE *ENGINE_get_digest_engine(int nid);
-ENGINE *ENGINE_get_pkey_meth_engine(int nid);
-ENGINE *ENGINE_get_pkey_asn1_meth_engine(int nid);
-
-/* This sets a new default ENGINE structure for performing RSA
- * operations. If the result is non-zero (success) then the ENGINE
- * structure will have had its reference count up'd so the caller
- * should still free their own reference 'e'. */
-int ENGINE_set_default_RSA(ENGINE *e);
-int ENGINE_set_default_string(ENGINE *e, const char *def_list);
-/* Same for the other "methods" */
-int ENGINE_set_default_DSA(ENGINE *e);
-int ENGINE_set_default_ECDH(ENGINE *e);
-int ENGINE_set_default_ECDSA(ENGINE *e);
-int ENGINE_set_default_DH(ENGINE *e);
-int ENGINE_set_default_RAND(ENGINE *e);
-int ENGINE_set_default_ciphers(ENGINE *e);
-int ENGINE_set_default_digests(ENGINE *e);
-int ENGINE_set_default_pkey_meths(ENGINE *e);
-int ENGINE_set_default_pkey_asn1_meths(ENGINE *e);
-
-/* The combination "set" - the flags are bitwise "OR"d from the
- * ENGINE_METHOD_*** defines above. As with the "ENGINE_register_complete()"
- * function, this function can result in unnecessary static linkage. If your
- * application requires only specific functionality, consider using more
- * selective functions. */
-int ENGINE_set_default(ENGINE *e, unsigned int flags);
-
-void ENGINE_add_conf_module(void);
-
-/* Deprecated functions ... */
-/* int ENGINE_clear_defaults(void); */
-
-/**************************/
-/* DYNAMIC ENGINE SUPPORT */
-/**************************/
-
-/* Binary/behaviour compatibility levels */
-#define OSSL_DYNAMIC_VERSION		(unsigned long)0x00020000
-/* Binary versions older than this are too old for us (whether we're a loader or
- * a loadee) */
-#define OSSL_DYNAMIC_OLDEST		(unsigned long)0x00020000
-
-/* When compiling an ENGINE entirely as an external shared library, loadable by
- * the "dynamic" ENGINE, these types are needed. The 'dynamic_fns' structure
- * type provides the calling application's (or library's) error functionality
- * and memory management function pointers to the loaded library. These should
- * be used/set in the loaded library code so that the loading application's
- * 'state' will be used/changed in all operations. The 'static_state' pointer
- * allows the loaded library to know if it shares the same static data as the
- * calling application (or library), and thus whether these callbacks need to be
- * set or not. */
-typedef void *(*dyn_MEM_malloc_cb)(size_t);
-typedef void *(*dyn_MEM_realloc_cb)(void *, size_t);
-typedef void (*dyn_MEM_free_cb)(void *);
-typedef struct st_dynamic_MEM_fns {
-	dyn_MEM_malloc_cb			malloc_cb;
-	dyn_MEM_realloc_cb			realloc_cb;
-	dyn_MEM_free_cb				free_cb;
-	} dynamic_MEM_fns;
-/* FIXME: Perhaps the memory and locking code (crypto.h) should declare and use
- * these types so we (and any other dependant code) can simplify a bit?? */
-typedef void (*dyn_lock_locking_cb)(int,int,const char *,int);
-typedef int (*dyn_lock_add_lock_cb)(int*,int,int,const char *,int);
-typedef struct CRYPTO_dynlock_value *(*dyn_dynlock_create_cb)(
-						const char *,int);
-typedef void (*dyn_dynlock_lock_cb)(int,struct CRYPTO_dynlock_value *,
-						const char *,int);
-typedef void (*dyn_dynlock_destroy_cb)(struct CRYPTO_dynlock_value *,
-						const char *,int);
-typedef struct st_dynamic_LOCK_fns {
-	dyn_lock_locking_cb			lock_locking_cb;
-	dyn_lock_add_lock_cb			lock_add_lock_cb;
-	dyn_dynlock_create_cb			dynlock_create_cb;
-	dyn_dynlock_lock_cb			dynlock_lock_cb;
-	dyn_dynlock_destroy_cb			dynlock_destroy_cb;
-	} dynamic_LOCK_fns;
-/* The top-level structure */
-typedef struct st_dynamic_fns {
-	void 					*static_state;
-	const ERR_FNS				*err_fns;
-	const CRYPTO_EX_DATA_IMPL		*ex_data_fns;
-	dynamic_MEM_fns				mem_fns;
-	dynamic_LOCK_fns			lock_fns;
-	} dynamic_fns;
-
-/* The version checking function should be of this prototype. NB: The
- * ossl_version value passed in is the OSSL_DYNAMIC_VERSION of the loading code.
- * If this function returns zero, it indicates a (potential) version
- * incompatibility and the loaded library doesn't believe it can proceed.
- * Otherwise, the returned value is the (latest) version supported by the
- * loading library. The loader may still decide that the loaded code's version
- * is unsatisfactory and could veto the load. The function is expected to
- * be implemented with the symbol name "v_check", and a default implementation
- * can be fully instantiated with IMPLEMENT_DYNAMIC_CHECK_FN(). */
-typedef unsigned long (*dynamic_v_check_fn)(unsigned long ossl_version);
-#define IMPLEMENT_DYNAMIC_CHECK_FN() \
-	OPENSSL_EXPORT unsigned long v_check(unsigned long v); \
-	OPENSSL_EXPORT unsigned long v_check(unsigned long v) { \
-		if(v >= OSSL_DYNAMIC_OLDEST) return OSSL_DYNAMIC_VERSION; \
-		return 0; }
-
-/* This function is passed the ENGINE structure to initialise with its own
- * function and command settings. It should not adjust the structural or
- * functional reference counts. If this function returns zero, (a) the load will
- * be aborted, (b) the previous ENGINE state will be memcpy'd back onto the
- * structure, and (c) the shared library will be unloaded. So implementations
- * should do their own internal cleanup in failure circumstances otherwise they
- * could leak. The 'id' parameter, if non-NULL, represents the ENGINE id that
- * the loader is looking for. If this is NULL, the shared library can choose to
- * return failure or to initialise a 'default' ENGINE. If non-NULL, the shared
- * library must initialise only an ENGINE matching the passed 'id'. The function
- * is expected to be implemented with the symbol name "bind_engine". A standard
- * implementation can be instantiated with IMPLEMENT_DYNAMIC_BIND_FN(fn) where
- * the parameter 'fn' is a callback function that populates the ENGINE structure
- * and returns an int value (zero for failure). 'fn' should have prototype;
- *    [static] int fn(ENGINE *e, const char *id); */
-typedef int (*dynamic_bind_engine)(ENGINE *e, const char *id,
-				const dynamic_fns *fns);
-#define IMPLEMENT_DYNAMIC_BIND_FN(fn) \
-	OPENSSL_EXPORT \
-	int bind_engine(ENGINE *e, const char *id, const dynamic_fns *fns); \
-	OPENSSL_EXPORT \
-	int bind_engine(ENGINE *e, const char *id, const dynamic_fns *fns) { \
-		if(ENGINE_get_static_state() == fns->static_state) goto skip_cbs; \
-		if(!CRYPTO_set_mem_functions(fns->mem_fns.malloc_cb, \
-			fns->mem_fns.realloc_cb, fns->mem_fns.free_cb)) \
-			return 0; \
-		CRYPTO_set_locking_callback(fns->lock_fns.lock_locking_cb); \
-		CRYPTO_set_add_lock_callback(fns->lock_fns.lock_add_lock_cb); \
-		CRYPTO_set_dynlock_create_callback(fns->lock_fns.dynlock_create_cb); \
-		CRYPTO_set_dynlock_lock_callback(fns->lock_fns.dynlock_lock_cb); \
-		CRYPTO_set_dynlock_destroy_callback(fns->lock_fns.dynlock_destroy_cb); \
-		if(!CRYPTO_set_ex_data_implementation(fns->ex_data_fns)) \
-			return 0; \
-		if(!ERR_set_implementation(fns->err_fns)) return 0; \
-	skip_cbs: \
-		if(!fn(e,id)) return 0; \
-		return 1; }
-
-/* If the loading application (or library) and the loaded ENGINE library share
- * the same static data (eg. they're both dynamically linked to the same
- * libcrypto.so) we need a way to avoid trying to set system callbacks - this
- * would fail, and for the same reason that it's unnecessary to try. If the
- * loaded ENGINE has (or gets from through the loader) its own copy of the
- * libcrypto static data, we will need to set the callbacks. The easiest way to
- * detect this is to have a function that returns a pointer to some static data
- * and let the loading application and loaded ENGINE compare their respective
- * values. */
-void *ENGINE_get_static_state(void);
-
-#if defined(__OpenBSD__) || defined(__FreeBSD__) || defined(HAVE_CRYPTODEV)
-void ENGINE_setup_bsd_cryptodev(void);
-#endif
-
-/* BEGIN ERROR CODES */
-/* The following lines are auto generated by the script mkerr.pl. Any changes
- * made after this point may be overwritten when the script is next run.
- */
-void ERR_load_ENGINE_strings(void);
-
-/* Error codes for the ENGINE functions. */
-
-/* Function codes. */
-#define ENGINE_F_DYNAMIC_CTRL				 180
-#define ENGINE_F_DYNAMIC_GET_DATA_CTX			 181
-#define ENGINE_F_DYNAMIC_LOAD				 182
-#define ENGINE_F_DYNAMIC_SET_DATA_CTX			 183
-#define ENGINE_F_ENGINE_ADD				 105
-#define ENGINE_F_ENGINE_BY_ID				 106
-#define ENGINE_F_ENGINE_CMD_IS_EXECUTABLE		 170
-#define ENGINE_F_ENGINE_CTRL				 142
-#define ENGINE_F_ENGINE_CTRL_CMD			 178
-#define ENGINE_F_ENGINE_CTRL_CMD_STRING			 171
-#define ENGINE_F_ENGINE_FINISH				 107
-#define ENGINE_F_ENGINE_FREE_UTIL			 108
-#define ENGINE_F_ENGINE_GET_CIPHER			 185
-#define ENGINE_F_ENGINE_GET_DEFAULT_TYPE		 177
-#define ENGINE_F_ENGINE_GET_DIGEST			 186
-#define ENGINE_F_ENGINE_GET_NEXT			 115
-#define ENGINE_F_ENGINE_GET_PKEY_ASN1_METH		 193
-#define ENGINE_F_ENGINE_GET_PKEY_METH			 192
-#define ENGINE_F_ENGINE_GET_PREV			 116
-#define ENGINE_F_ENGINE_INIT				 119
-#define ENGINE_F_ENGINE_LIST_ADD			 120
-#define ENGINE_F_ENGINE_LIST_REMOVE			 121
-#define ENGINE_F_ENGINE_LOAD_PRIVATE_KEY		 150
-#define ENGINE_F_ENGINE_LOAD_PUBLIC_KEY			 151
-#define ENGINE_F_ENGINE_LOAD_SSL_CLIENT_CERT		 194
-#define ENGINE_F_ENGINE_NEW				 122
-#define ENGINE_F_ENGINE_REMOVE				 123
-#define ENGINE_F_ENGINE_SET_DEFAULT_STRING		 189
-#define ENGINE_F_ENGINE_SET_DEFAULT_TYPE		 126
-#define ENGINE_F_ENGINE_SET_ID				 129
-#define ENGINE_F_ENGINE_SET_NAME			 130
-#define ENGINE_F_ENGINE_TABLE_REGISTER			 184
-#define ENGINE_F_ENGINE_UNLOAD_KEY			 152
-#define ENGINE_F_ENGINE_UNLOCKED_FINISH			 191
-#define ENGINE_F_ENGINE_UP_REF				 190
-#define ENGINE_F_INT_CTRL_HELPER			 172
-#define ENGINE_F_INT_ENGINE_CONFIGURE			 188
-#define ENGINE_F_INT_ENGINE_MODULE_INIT			 187
-#define ENGINE_F_LOG_MESSAGE				 141
-
-/* Reason codes. */
-#define ENGINE_R_ALREADY_LOADED				 100
-#define ENGINE_R_ARGUMENT_IS_NOT_A_NUMBER		 133
-#define ENGINE_R_CMD_NOT_EXECUTABLE			 134
-#define ENGINE_R_COMMAND_TAKES_INPUT			 135
-#define ENGINE_R_COMMAND_TAKES_NO_INPUT			 136
-#define ENGINE_R_CONFLICTING_ENGINE_ID			 103
-#define ENGINE_R_CTRL_COMMAND_NOT_IMPLEMENTED		 119
-#define ENGINE_R_DH_NOT_IMPLEMENTED			 139
-#define ENGINE_R_DSA_NOT_IMPLEMENTED			 140
-#define ENGINE_R_DSO_FAILURE				 104
-#define ENGINE_R_DSO_NOT_FOUND				 132
-#define ENGINE_R_ENGINES_SECTION_ERROR			 148
-#define ENGINE_R_ENGINE_CONFIGURATION_ERROR		 102
-#define ENGINE_R_ENGINE_IS_NOT_IN_LIST			 105
-#define ENGINE_R_ENGINE_SECTION_ERROR			 149
-#define ENGINE_R_FAILED_LOADING_PRIVATE_KEY		 128
-#define ENGINE_R_FAILED_LOADING_PUBLIC_KEY		 129
-#define ENGINE_R_FINISH_FAILED				 106
-#define ENGINE_R_GET_HANDLE_FAILED			 107
-#define ENGINE_R_ID_OR_NAME_MISSING			 108
-#define ENGINE_R_INIT_FAILED				 109
-#define ENGINE_R_INTERNAL_LIST_ERROR			 110
-#define ENGINE_R_INVALID_ARGUMENT			 143
-#define ENGINE_R_INVALID_CMD_NAME			 137
-#define ENGINE_R_INVALID_CMD_NUMBER			 138
-#define ENGINE_R_INVALID_INIT_VALUE			 151
-#define ENGINE_R_INVALID_STRING				 150
-#define ENGINE_R_NOT_INITIALISED			 117
-#define ENGINE_R_NOT_LOADED				 112
-#define ENGINE_R_NO_CONTROL_FUNCTION			 120
-#define ENGINE_R_NO_INDEX				 144
-#define ENGINE_R_NO_LOAD_FUNCTION			 125
-#define ENGINE_R_NO_REFERENCE				 130
-#define ENGINE_R_NO_SUCH_ENGINE				 116
-#define ENGINE_R_NO_UNLOAD_FUNCTION			 126
-#define ENGINE_R_PROVIDE_PARAMETERS			 113
-#define ENGINE_R_RSA_NOT_IMPLEMENTED			 141
-#define ENGINE_R_UNIMPLEMENTED_CIPHER			 146
-#define ENGINE_R_UNIMPLEMENTED_DIGEST			 147
-#define ENGINE_R_UNIMPLEMENTED_PUBLIC_KEY_METHOD	 101
-#define ENGINE_R_VERSION_INCOMPATIBILITY		 145
-
-#ifdef  __cplusplus
-}
-#endif
-#endif
+/* openssl/engine.h */
+/* Written by Geoff Thorpe (geoff@geoffthorpe.net) for the OpenSSL
+ * project 2000.
+ */
+/* ====================================================================
+ * Copyright (c) 1999-2004 The OpenSSL Project.  All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer. 
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ *
+ * 3. All advertising materials mentioning features or use of this
+ *    software must display the following acknowledgment:
+ *    "This product includes software developed by the OpenSSL Project
+ *    for use in the OpenSSL Toolkit. (http://www.OpenSSL.org/)"
+ *
+ * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to
+ *    endorse or promote products derived from this software without
+ *    prior written permission. For written permission, please contact
+ *    licensing@OpenSSL.org.
+ *
+ * 5. Products derived from this software may not be called "OpenSSL"
+ *    nor may "OpenSSL" appear in their names without prior written
+ *    permission of the OpenSSL Project.
+ *
+ * 6. Redistributions of any form whatsoever must retain the following
+ *    acknowledgment:
+ *    "This product includes software developed by the OpenSSL Project
+ *    for use in the OpenSSL Toolkit (http://www.OpenSSL.org/)"
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY
+ * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
+ * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE OpenSSL PROJECT OR
+ * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
+ * OF THE POSSIBILITY OF SUCH DAMAGE.
+ * ====================================================================
+ *
+ * This product includes cryptographic software written by Eric Young
+ * (eay@cryptsoft.com).  This product includes software written by Tim
+ * Hudson (tjh@cryptsoft.com).
+ *
+ */
+/* ====================================================================
+ * Copyright 2002 Sun Microsystems, Inc. ALL RIGHTS RESERVED.
+ * ECDH support in OpenSSL originally developed by 
+ * SUN MICROSYSTEMS, INC., and contributed to the OpenSSL project.
+ */
+
+#ifndef HEADER_ENGINE_H
+#define HEADER_ENGINE_H
+
+#include <openssl/opensslconf.h>
+
+#ifdef OPENSSL_NO_ENGINE
+#error ENGINE is disabled.
+#endif
+
+#ifndef OPENSSL_NO_DEPRECATED
+#include <openssl/bn.h>
+#ifndef OPENSSL_NO_RSA
+#include <openssl/rsa.h>
+#endif
+#ifndef OPENSSL_NO_DSA
+#include <openssl/dsa.h>
+#endif
+#ifndef OPENSSL_NO_DH
+#include <openssl/dh.h>
+#endif
+#ifndef OPENSSL_NO_ECDH
+#include <openssl/ecdh.h>
+#endif
+#ifndef OPENSSL_NO_ECDSA
+#include <openssl/ecdsa.h>
+#endif
+#include <openssl/rand.h>
+#include <openssl/ui.h>
+#include <openssl/err.h>
+#endif
+
+#include <openssl/ossl_typ.h>
+#include <openssl/symhacks.h>
+
+#include <openssl/x509.h>
+
+#ifdef  __cplusplus
+extern "C" {
+#endif
+
+/* These flags are used to control combinations of algorithm (methods)
+ * by bitwise "OR"ing. */
+#define ENGINE_METHOD_RSA		(unsigned int)0x0001
+#define ENGINE_METHOD_DSA		(unsigned int)0x0002
+#define ENGINE_METHOD_DH		(unsigned int)0x0004
+#define ENGINE_METHOD_RAND		(unsigned int)0x0008
+#define ENGINE_METHOD_ECDH		(unsigned int)0x0010
+#define ENGINE_METHOD_ECDSA		(unsigned int)0x0020
+#define ENGINE_METHOD_CIPHERS		(unsigned int)0x0040
+#define ENGINE_METHOD_DIGESTS		(unsigned int)0x0080
+#define ENGINE_METHOD_STORE		(unsigned int)0x0100
+#define ENGINE_METHOD_PKEY_METHS	(unsigned int)0x0200
+#define ENGINE_METHOD_PKEY_ASN1_METHS	(unsigned int)0x0400
+/* Obvious all-or-nothing cases. */
+#define ENGINE_METHOD_ALL		(unsigned int)0xFFFF
+#define ENGINE_METHOD_NONE		(unsigned int)0x0000
+
+/* This(ese) flag(s) controls behaviour of the ENGINE_TABLE mechanism used
+ * internally to control registration of ENGINE implementations, and can be set
+ * by ENGINE_set_table_flags(). The "NOINIT" flag prevents attempts to
+ * initialise registered ENGINEs if they are not already initialised. */
+#define ENGINE_TABLE_FLAG_NOINIT	(unsigned int)0x0001
+
+/* ENGINE flags that can be set by ENGINE_set_flags(). */
+/* #define ENGINE_FLAGS_MALLOCED	0x0001 */ /* Not used */
+
+/* This flag is for ENGINEs that wish to handle the various 'CMD'-related
+ * control commands on their own. Without this flag, ENGINE_ctrl() handles these
+ * control commands on behalf of the ENGINE using their "cmd_defns" data. */
+#define ENGINE_FLAGS_MANUAL_CMD_CTRL	(int)0x0002
+
+/* This flag is for ENGINEs who return new duplicate structures when found via
+ * "ENGINE_by_id()". When an ENGINE must store state (eg. if ENGINE_ctrl()
+ * commands are called in sequence as part of some stateful process like
+ * key-generation setup and execution), it can set this flag - then each attempt
+ * to obtain the ENGINE will result in it being copied into a new structure.
+ * Normally, ENGINEs don't declare this flag so ENGINE_by_id() just increments
+ * the existing ENGINE's structural reference count. */
+#define ENGINE_FLAGS_BY_ID_COPY		(int)0x0004
+
+/* ENGINEs can support their own command types, and these flags are used in
+ * ENGINE_CTRL_GET_CMD_FLAGS to indicate to the caller what kind of input each
+ * command expects. Currently only numeric and string input is supported. If a
+ * control command supports none of the _NUMERIC, _STRING, or _NO_INPUT options,
+ * then it is regarded as an "internal" control command - and not for use in
+ * config setting situations. As such, they're not available to the
+ * ENGINE_ctrl_cmd_string() function, only raw ENGINE_ctrl() access. Changes to
+ * this list of 'command types' should be reflected carefully in
+ * ENGINE_cmd_is_executable() and ENGINE_ctrl_cmd_string(). */
+
+/* accepts a 'long' input value (3rd parameter to ENGINE_ctrl) */
+#define ENGINE_CMD_FLAG_NUMERIC		(unsigned int)0x0001
+/* accepts string input (cast from 'void*' to 'const char *', 4th parameter to
+ * ENGINE_ctrl) */
+#define ENGINE_CMD_FLAG_STRING		(unsigned int)0x0002
+/* Indicates that the control command takes *no* input. Ie. the control command
+ * is unparameterised. */
+#define ENGINE_CMD_FLAG_NO_INPUT	(unsigned int)0x0004
+/* Indicates that the control command is internal. This control command won't
+ * be shown in any output, and is only usable through the ENGINE_ctrl_cmd()
+ * function. */
+#define ENGINE_CMD_FLAG_INTERNAL	(unsigned int)0x0008
+
+/* NB: These 3 control commands are deprecated and should not be used. ENGINEs
+ * relying on these commands should compile conditional support for
+ * compatibility (eg. if these symbols are defined) but should also migrate the
+ * same functionality to their own ENGINE-specific control functions that can be
+ * "discovered" by calling applications. The fact these control commands
+ * wouldn't be "executable" (ie. usable by text-based config) doesn't change the
+ * fact that application code can find and use them without requiring per-ENGINE
+ * hacking. */
+
+/* These flags are used to tell the ctrl function what should be done.
+ * All command numbers are shared between all engines, even if some don't
+ * make sense to some engines.  In such a case, they do nothing but return
+ * the error ENGINE_R_CTRL_COMMAND_NOT_IMPLEMENTED. */
+#define ENGINE_CTRL_SET_LOGSTREAM		1
+#define ENGINE_CTRL_SET_PASSWORD_CALLBACK	2
+#define ENGINE_CTRL_HUP				3 /* Close and reinitialise any
+						     handles/connections etc. */
+#define ENGINE_CTRL_SET_USER_INTERFACE          4 /* Alternative to callback */
+#define ENGINE_CTRL_SET_CALLBACK_DATA           5 /* User-specific data, used
+						     when calling the password
+						     callback and the user
+						     interface */
+#define ENGINE_CTRL_LOAD_CONFIGURATION		6 /* Load a configuration, given
+						     a string that represents a
+						     file name or so */
+#define ENGINE_CTRL_LOAD_SECTION		7 /* Load data from a given
+						     section in the already loaded
+						     configuration */
+
+/* These control commands allow an application to deal with an arbitrary engine
+ * in a dynamic way. Warn: Negative return values indicate errors FOR THESE
+ * COMMANDS because zero is used to indicate 'end-of-list'. Other commands,
+ * including ENGINE-specific command types, return zero for an error.
+ *
+ * An ENGINE can choose to implement these ctrl functions, and can internally
+ * manage things however it chooses - it does so by setting the
+ * ENGINE_FLAGS_MANUAL_CMD_CTRL flag (using ENGINE_set_flags()). Otherwise the
+ * ENGINE_ctrl() code handles this on the ENGINE's behalf using the cmd_defns
+ * data (set using ENGINE_set_cmd_defns()). This means an ENGINE's ctrl()
+ * handler need only implement its own commands - the above "meta" commands will
+ * be taken care of. */
+
+/* Returns non-zero if the supplied ENGINE has a ctrl() handler. If "not", then
+ * all the remaining control commands will return failure, so it is worth
+ * checking this first if the caller is trying to "discover" the engine's
+ * capabilities and doesn't want errors generated unnecessarily. */
+#define ENGINE_CTRL_HAS_CTRL_FUNCTION		10
+/* Returns a positive command number for the first command supported by the
+ * engine. Returns zero if no ctrl commands are supported. */
+#define ENGINE_CTRL_GET_FIRST_CMD_TYPE		11
+/* The 'long' argument specifies a command implemented by the engine, and the
+ * return value is the next command supported, or zero if there are no more. */
+#define ENGINE_CTRL_GET_NEXT_CMD_TYPE		12
+/* The 'void*' argument is a command name (cast from 'const char *'), and the
+ * return value is the command that corresponds to it. */
+#define ENGINE_CTRL_GET_CMD_FROM_NAME		13
+/* The next two allow a command to be converted into its corresponding string
+ * form. In each case, the 'long' argument supplies the command. In the NAME_LEN
+ * case, the return value is the length of the command name (not counting a
+ * trailing EOL). In the NAME case, the 'void*' argument must be a string buffer
+ * large enough, and it will be populated with the name of the command (WITH a
+ * trailing EOL). */
+#define ENGINE_CTRL_GET_NAME_LEN_FROM_CMD	14
+#define ENGINE_CTRL_GET_NAME_FROM_CMD		15
+/* The next two are similar but give a "short description" of a command. */
+#define ENGINE_CTRL_GET_DESC_LEN_FROM_CMD	16
+#define ENGINE_CTRL_GET_DESC_FROM_CMD		17
+/* With this command, the return value is the OR'd combination of
+ * ENGINE_CMD_FLAG_*** values that indicate what kind of input a given
+ * engine-specific ctrl command expects. */
+#define ENGINE_CTRL_GET_CMD_FLAGS		18
+
+/* ENGINE implementations should start the numbering of their own control
+ * commands from this value. (ie. ENGINE_CMD_BASE, ENGINE_CMD_BASE + 1, etc). */
+#define ENGINE_CMD_BASE				200
+
+/* NB: These 2 nCipher "chil" control commands are deprecated, and their
+ * functionality is now available through ENGINE-specific control commands
+ * (exposed through the above-mentioned 'CMD'-handling). Code using these 2
+ * commands should be migrated to the more general command handling before these
+ * are removed. */
+
+/* Flags specific to the nCipher "chil" engine */
+#define ENGINE_CTRL_CHIL_SET_FORKCHECK		100
+	/* Depending on the value of the (long)i argument, this sets or
+	 * unsets the SimpleForkCheck flag in the CHIL API to enable or
+	 * disable checking and workarounds for applications that fork().
+	 */
+#define ENGINE_CTRL_CHIL_NO_LOCKING		101
+	/* This prevents the initialisation function from providing mutex
+	 * callbacks to the nCipher library. */
+
+/* If an ENGINE supports its own specific control commands and wishes the
+ * framework to handle the above 'ENGINE_CMD_***'-manipulation commands on its
+ * behalf, it should supply a null-terminated array of ENGINE_CMD_DEFN entries
+ * to ENGINE_set_cmd_defns(). It should also implement a ctrl() handler that
+ * supports the stated commands (ie. the "cmd_num" entries as described by the
+ * array). NB: The array must be ordered in increasing order of cmd_num.
+ * "null-terminated" means that the last ENGINE_CMD_DEFN element has cmd_num set
+ * to zero and/or cmd_name set to NULL. */
+typedef struct ENGINE_CMD_DEFN_st
+	{
+	unsigned int cmd_num; /* The command number */
+	const char *cmd_name; /* The command name itself */
+	const char *cmd_desc; /* A short description of the command */
+	unsigned int cmd_flags; /* The input the command expects */
+	} ENGINE_CMD_DEFN;
+
+/* Generic function pointer */
+typedef int (*ENGINE_GEN_FUNC_PTR)(void);
+/* Generic function pointer taking no arguments */
+typedef int (*ENGINE_GEN_INT_FUNC_PTR)(ENGINE *);
+/* Specific control function pointer */
+typedef int (*ENGINE_CTRL_FUNC_PTR)(ENGINE *, int, long, void *, void (*f)(void));
+/* Generic load_key function pointer */
+typedef EVP_PKEY * (*ENGINE_LOAD_KEY_PTR)(ENGINE *, const char *,
+	UI_METHOD *ui_method, void *callback_data);
+typedef int (*ENGINE_SSL_CLIENT_CERT_PTR)(ENGINE *, SSL *ssl,
+	STACK_OF(X509_NAME) *ca_dn, X509 **pcert, EVP_PKEY **pkey,
+	STACK_OF(X509) **pother, UI_METHOD *ui_method, void *callback_data);
+/* These callback types are for an ENGINE's handler for cipher and digest logic.
+ * These handlers have these prototypes;
+ *   int foo(ENGINE *e, const EVP_CIPHER **cipher, const int **nids, int nid);
+ *   int foo(ENGINE *e, const EVP_MD **digest, const int **nids, int nid);
+ * Looking at how to implement these handlers in the case of cipher support, if
+ * the framework wants the EVP_CIPHER for 'nid', it will call;
+ *   foo(e, &p_evp_cipher, NULL, nid);    (return zero for failure)
+ * If the framework wants a list of supported 'nid's, it will call;
+ *   foo(e, NULL, &p_nids, 0); (returns number of 'nids' or -1 for error)
+ */
+/* Returns to a pointer to the array of supported cipher 'nid's. If the second
+ * parameter is non-NULL it is set to the size of the returned array. */
+typedef int (*ENGINE_CIPHERS_PTR)(ENGINE *, const EVP_CIPHER **, const int **, int);
+typedef int (*ENGINE_DIGESTS_PTR)(ENGINE *, const EVP_MD **, const int **, int);
+typedef int (*ENGINE_PKEY_METHS_PTR)(ENGINE *, EVP_PKEY_METHOD **, const int **, int);
+typedef int (*ENGINE_PKEY_ASN1_METHS_PTR)(ENGINE *, EVP_PKEY_ASN1_METHOD **, const int **, int);
+/* STRUCTURE functions ... all of these functions deal with pointers to ENGINE
+ * structures where the pointers have a "structural reference". This means that
+ * their reference is to allowed access to the structure but it does not imply
+ * that the structure is functional. To simply increment or decrement the
+ * structural reference count, use ENGINE_by_id and ENGINE_free. NB: This is not
+ * required when iterating using ENGINE_get_next as it will automatically
+ * decrement the structural reference count of the "current" ENGINE and
+ * increment the structural reference count of the ENGINE it returns (unless it
+ * is NULL). */
+
+/* Get the first/last "ENGINE" type available. */
+ENGINE *ENGINE_get_first(void);
+ENGINE *ENGINE_get_last(void);
+/* Iterate to the next/previous "ENGINE" type (NULL = end of the list). */
+ENGINE *ENGINE_get_next(ENGINE *e);
+ENGINE *ENGINE_get_prev(ENGINE *e);
+/* Add another "ENGINE" type into the array. */
+int ENGINE_add(ENGINE *e);
+/* Remove an existing "ENGINE" type from the array. */
+int ENGINE_remove(ENGINE *e);
+/* Retrieve an engine from the list by its unique "id" value. */
+ENGINE *ENGINE_by_id(const char *id);
+/* Add all the built-in engines. */
+void ENGINE_load_openssl(void);
+void ENGINE_load_dynamic(void);
+#ifndef OPENSSL_NO_STATIC_ENGINE
+void ENGINE_load_4758cca(void);
+void ENGINE_load_aep(void);
+void ENGINE_load_atalla(void);
+void ENGINE_load_chil(void);
+void ENGINE_load_cswift(void);
+void ENGINE_load_nuron(void);
+void ENGINE_load_sureware(void);
+void ENGINE_load_ubsec(void);
+void ENGINE_load_padlock(void);
+void ENGINE_load_capi(void);
+#ifndef OPENSSL_NO_GMP
+void ENGINE_load_gmp(void);
+#endif
+#ifndef OPENSSL_NO_GOST
+void ENGINE_load_gost(void);
+#endif
+#endif
+void ENGINE_load_cryptodev(void);
+void ENGINE_load_builtin_engines(void);
+
+/* Get and set global flags (ENGINE_TABLE_FLAG_***) for the implementation
+ * "registry" handling. */
+unsigned int ENGINE_get_table_flags(void);
+void ENGINE_set_table_flags(unsigned int flags);
+
+/* Manage registration of ENGINEs per "table". For each type, there are 3
+ * functions;
+ *   ENGINE_register_***(e) - registers the implementation from 'e' (if it has one)
+ *   ENGINE_unregister_***(e) - unregister the implementation from 'e'
+ *   ENGINE_register_all_***() - call ENGINE_register_***() for each 'e' in the list
+ * Cleanup is automatically registered from each table when required, so
+ * ENGINE_cleanup() will reverse any "register" operations. */
+
+int ENGINE_register_RSA(ENGINE *e);
+void ENGINE_unregister_RSA(ENGINE *e);
+void ENGINE_register_all_RSA(void);
+
+int ENGINE_register_DSA(ENGINE *e);
+void ENGINE_unregister_DSA(ENGINE *e);
+void ENGINE_register_all_DSA(void);
+
+int ENGINE_register_ECDH(ENGINE *e);
+void ENGINE_unregister_ECDH(ENGINE *e);
+void ENGINE_register_all_ECDH(void);
+
+int ENGINE_register_ECDSA(ENGINE *e);
+void ENGINE_unregister_ECDSA(ENGINE *e);
+void ENGINE_register_all_ECDSA(void);
+
+int ENGINE_register_DH(ENGINE *e);
+void ENGINE_unregister_DH(ENGINE *e);
+void ENGINE_register_all_DH(void);
+
+int ENGINE_register_RAND(ENGINE *e);
+void ENGINE_unregister_RAND(ENGINE *e);
+void ENGINE_register_all_RAND(void);
+
+int ENGINE_register_STORE(ENGINE *e);
+void ENGINE_unregister_STORE(ENGINE *e);
+void ENGINE_register_all_STORE(void);
+
+int ENGINE_register_ciphers(ENGINE *e);
+void ENGINE_unregister_ciphers(ENGINE *e);
+void ENGINE_register_all_ciphers(void);
+
+int ENGINE_register_digests(ENGINE *e);
+void ENGINE_unregister_digests(ENGINE *e);
+void ENGINE_register_all_digests(void);
+
+int ENGINE_register_pkey_meths(ENGINE *e);
+void ENGINE_unregister_pkey_meths(ENGINE *e);
+void ENGINE_register_all_pkey_meths(void);
+
+int ENGINE_register_pkey_asn1_meths(ENGINE *e);
+void ENGINE_unregister_pkey_asn1_meths(ENGINE *e);
+void ENGINE_register_all_pkey_asn1_meths(void);
+
+/* These functions register all support from the above categories. Note, use of
+ * these functions can result in static linkage of code your application may not
+ * need. If you only need a subset of functionality, consider using more
+ * selective initialisation. */
+int ENGINE_register_complete(ENGINE *e);
+int ENGINE_register_all_complete(void);
+
+/* Send parametrised control commands to the engine. The possibilities to send
+ * down an integer, a pointer to data or a function pointer are provided. Any of
+ * the parameters may or may not be NULL, depending on the command number. In
+ * actuality, this function only requires a structural (rather than functional)
+ * reference to an engine, but many control commands may require the engine be
+ * functional. The caller should be aware of trying commands that require an
+ * operational ENGINE, and only use functional references in such situations. */
+int ENGINE_ctrl(ENGINE *e, int cmd, long i, void *p, void (*f)(void));
+
+/* This function tests if an ENGINE-specific command is usable as a "setting".
+ * Eg. in an application's config file that gets processed through
+ * ENGINE_ctrl_cmd_string(). If this returns zero, it is not available to
+ * ENGINE_ctrl_cmd_string(), only ENGINE_ctrl(). */
+int ENGINE_cmd_is_executable(ENGINE *e, int cmd);
+
+/* This function works like ENGINE_ctrl() with the exception of taking a
+ * command name instead of a command number, and can handle optional commands.
+ * See the comment on ENGINE_ctrl_cmd_string() for an explanation on how to
+ * use the cmd_name and cmd_optional. */
+int ENGINE_ctrl_cmd(ENGINE *e, const char *cmd_name,
+        long i, void *p, void (*f)(void), int cmd_optional);
+
+/* This function passes a command-name and argument to an ENGINE. The cmd_name
+ * is converted to a command number and the control command is called using
+ * 'arg' as an argument (unless the ENGINE doesn't support such a command, in
+ * which case no control command is called). The command is checked for input
+ * flags, and if necessary the argument will be converted to a numeric value. If
+ * cmd_optional is non-zero, then if the ENGINE doesn't support the given
+ * cmd_name the return value will be success anyway. This function is intended
+ * for applications to use so that users (or config files) can supply
+ * engine-specific config data to the ENGINE at run-time to control behaviour of
+ * specific engines. As such, it shouldn't be used for calling ENGINE_ctrl()
+ * functions that return data, deal with binary data, or that are otherwise
+ * supposed to be used directly through ENGINE_ctrl() in application code. Any
+ * "return" data from an ENGINE_ctrl() operation in this function will be lost -
+ * the return value is interpreted as failure if the return value is zero,
+ * success otherwise, and this function returns a boolean value as a result. In
+ * other words, vendors of 'ENGINE'-enabled devices should write ENGINE
+ * implementations with parameterisations that work in this scheme, so that
+ * compliant ENGINE-based applications can work consistently with the same
+ * configuration for the same ENGINE-enabled devices, across applications. */
+int ENGINE_ctrl_cmd_string(ENGINE *e, const char *cmd_name, const char *arg,
+				int cmd_optional);
+
+/* These functions are useful for manufacturing new ENGINE structures. They
+ * don't address reference counting at all - one uses them to populate an ENGINE
+ * structure with personalised implementations of things prior to using it
+ * directly or adding it to the builtin ENGINE list in OpenSSL. These are also
+ * here so that the ENGINE structure doesn't have to be exposed and break binary
+ * compatibility! */
+ENGINE *ENGINE_new(void);
+int ENGINE_free(ENGINE *e);
+int ENGINE_up_ref(ENGINE *e);
+int ENGINE_set_id(ENGINE *e, const char *id);
+int ENGINE_set_name(ENGINE *e, const char *name);
+int ENGINE_set_RSA(ENGINE *e, const RSA_METHOD *rsa_meth);
+int ENGINE_set_DSA(ENGINE *e, const DSA_METHOD *dsa_meth);
+int ENGINE_set_ECDH(ENGINE *e, const ECDH_METHOD *ecdh_meth);
+int ENGINE_set_ECDSA(ENGINE *e, const ECDSA_METHOD *ecdsa_meth);
+int ENGINE_set_DH(ENGINE *e, const DH_METHOD *dh_meth);
+int ENGINE_set_RAND(ENGINE *e, const RAND_METHOD *rand_meth);
+int ENGINE_set_STORE(ENGINE *e, const STORE_METHOD *store_meth);
+int ENGINE_set_destroy_function(ENGINE *e, ENGINE_GEN_INT_FUNC_PTR destroy_f);
+int ENGINE_set_init_function(ENGINE *e, ENGINE_GEN_INT_FUNC_PTR init_f);
+int ENGINE_set_finish_function(ENGINE *e, ENGINE_GEN_INT_FUNC_PTR finish_f);
+int ENGINE_set_ctrl_function(ENGINE *e, ENGINE_CTRL_FUNC_PTR ctrl_f);
+int ENGINE_set_load_privkey_function(ENGINE *e, ENGINE_LOAD_KEY_PTR loadpriv_f);
+int ENGINE_set_load_pubkey_function(ENGINE *e, ENGINE_LOAD_KEY_PTR loadpub_f);
+int ENGINE_set_load_ssl_client_cert_function(ENGINE *e,
+				ENGINE_SSL_CLIENT_CERT_PTR loadssl_f);
+int ENGINE_set_ciphers(ENGINE *e, ENGINE_CIPHERS_PTR f);
+int ENGINE_set_digests(ENGINE *e, ENGINE_DIGESTS_PTR f);
+int ENGINE_set_pkey_meths(ENGINE *e, ENGINE_PKEY_METHS_PTR f);
+int ENGINE_set_pkey_asn1_meths(ENGINE *e, ENGINE_PKEY_ASN1_METHS_PTR f);
+int ENGINE_set_flags(ENGINE *e, int flags);
+int ENGINE_set_cmd_defns(ENGINE *e, const ENGINE_CMD_DEFN *defns);
+/* These functions allow control over any per-structure ENGINE data. */
+int ENGINE_get_ex_new_index(long argl, void *argp, CRYPTO_EX_new *new_func,
+		CRYPTO_EX_dup *dup_func, CRYPTO_EX_free *free_func);
+int ENGINE_set_ex_data(ENGINE *e, int idx, void *arg);
+void *ENGINE_get_ex_data(const ENGINE *e, int idx);
+
+/* This function cleans up anything that needs it. Eg. the ENGINE_add() function
+ * automatically ensures the list cleanup function is registered to be called
+ * from ENGINE_cleanup(). Similarly, all ENGINE_register_*** functions ensure
+ * ENGINE_cleanup() will clean up after them. */
+void ENGINE_cleanup(void);
+
+/* These return values from within the ENGINE structure. These can be useful
+ * with functional references as well as structural references - it depends
+ * which you obtained. Using the result for functional purposes if you only
+ * obtained a structural reference may be problematic! */
+const char *ENGINE_get_id(const ENGINE *e);
+const char *ENGINE_get_name(const ENGINE *e);
+const RSA_METHOD *ENGINE_get_RSA(const ENGINE *e);
+const DSA_METHOD *ENGINE_get_DSA(const ENGINE *e);
+const ECDH_METHOD *ENGINE_get_ECDH(const ENGINE *e);
+const ECDSA_METHOD *ENGINE_get_ECDSA(const ENGINE *e);
+const DH_METHOD *ENGINE_get_DH(const ENGINE *e);
+const RAND_METHOD *ENGINE_get_RAND(const ENGINE *e);
+const STORE_METHOD *ENGINE_get_STORE(const ENGINE *e);
+ENGINE_GEN_INT_FUNC_PTR ENGINE_get_destroy_function(const ENGINE *e);
+ENGINE_GEN_INT_FUNC_PTR ENGINE_get_init_function(const ENGINE *e);
+ENGINE_GEN_INT_FUNC_PTR ENGINE_get_finish_function(const ENGINE *e);
+ENGINE_CTRL_FUNC_PTR ENGINE_get_ctrl_function(const ENGINE *e);
+ENGINE_LOAD_KEY_PTR ENGINE_get_load_privkey_function(const ENGINE *e);
+ENGINE_LOAD_KEY_PTR ENGINE_get_load_pubkey_function(const ENGINE *e);
+ENGINE_SSL_CLIENT_CERT_PTR ENGINE_get_ssl_client_cert_function(const ENGINE *e);
+ENGINE_CIPHERS_PTR ENGINE_get_ciphers(const ENGINE *e);
+ENGINE_DIGESTS_PTR ENGINE_get_digests(const ENGINE *e);
+ENGINE_PKEY_METHS_PTR ENGINE_get_pkey_meths(const ENGINE *e);
+ENGINE_PKEY_ASN1_METHS_PTR ENGINE_get_pkey_asn1_meths(const ENGINE *e);
+const EVP_CIPHER *ENGINE_get_cipher(ENGINE *e, int nid);
+const EVP_MD *ENGINE_get_digest(ENGINE *e, int nid);
+const EVP_PKEY_METHOD *ENGINE_get_pkey_meth(ENGINE *e, int nid);
+const EVP_PKEY_ASN1_METHOD *ENGINE_get_pkey_asn1_meth(ENGINE *e, int nid);
+const EVP_PKEY_ASN1_METHOD *ENGINE_get_pkey_asn1_meth_str(ENGINE *e,
+					const char *str, int len);
+const EVP_PKEY_ASN1_METHOD *ENGINE_pkey_asn1_find_str(ENGINE **pe,
+					const char *str, int len);
+const ENGINE_CMD_DEFN *ENGINE_get_cmd_defns(const ENGINE *e);
+int ENGINE_get_flags(const ENGINE *e);
+
+/* FUNCTIONAL functions. These functions deal with ENGINE structures
+ * that have (or will) be initialised for use. Broadly speaking, the
+ * structural functions are useful for iterating the list of available
+ * engine types, creating new engine types, and other "list" operations.
+ * These functions actually deal with ENGINEs that are to be used. As
+ * such these functions can fail (if applicable) when particular
+ * engines are unavailable - eg. if a hardware accelerator is not
+ * attached or not functioning correctly. Each ENGINE has 2 reference
+ * counts; structural and functional. Every time a functional reference
+ * is obtained or released, a corresponding structural reference is
+ * automatically obtained or released too. */
+
+/* Initialise a engine type for use (or up its reference count if it's
+ * already in use). This will fail if the engine is not currently
+ * operational and cannot initialise. */
+int ENGINE_init(ENGINE *e);
+/* Free a functional reference to a engine type. This does not require
+ * a corresponding call to ENGINE_free as it also releases a structural
+ * reference. */
+int ENGINE_finish(ENGINE *e);
+
+/* The following functions handle keys that are stored in some secondary
+ * location, handled by the engine.  The storage may be on a card or
+ * whatever. */
+EVP_PKEY *ENGINE_load_private_key(ENGINE *e, const char *key_id,
+	UI_METHOD *ui_method, void *callback_data);
+EVP_PKEY *ENGINE_load_public_key(ENGINE *e, const char *key_id,
+	UI_METHOD *ui_method, void *callback_data);
+int ENGINE_load_ssl_client_cert(ENGINE *e, SSL *s,
+	STACK_OF(X509_NAME) *ca_dn, X509 **pcert, EVP_PKEY **ppkey,
+	STACK_OF(X509) **pother,
+	UI_METHOD *ui_method, void *callback_data);
+
+/* This returns a pointer for the current ENGINE structure that
+ * is (by default) performing any RSA operations. The value returned
+ * is an incremented reference, so it should be free'd (ENGINE_finish)
+ * before it is discarded. */
+ENGINE *ENGINE_get_default_RSA(void);
+/* Same for the other "methods" */
+ENGINE *ENGINE_get_default_DSA(void);
+ENGINE *ENGINE_get_default_ECDH(void);
+ENGINE *ENGINE_get_default_ECDSA(void);
+ENGINE *ENGINE_get_default_DH(void);
+ENGINE *ENGINE_get_default_RAND(void);
+/* These functions can be used to get a functional reference to perform
+ * ciphering or digesting corresponding to "nid". */
+ENGINE *ENGINE_get_cipher_engine(int nid);
+ENGINE *ENGINE_get_digest_engine(int nid);
+ENGINE *ENGINE_get_pkey_meth_engine(int nid);
+ENGINE *ENGINE_get_pkey_asn1_meth_engine(int nid);
+
+/* This sets a new default ENGINE structure for performing RSA
+ * operations. If the result is non-zero (success) then the ENGINE
+ * structure will have had its reference count up'd so the caller
+ * should still free their own reference 'e'. */
+int ENGINE_set_default_RSA(ENGINE *e);
+int ENGINE_set_default_string(ENGINE *e, const char *def_list);
+/* Same for the other "methods" */
+int ENGINE_set_default_DSA(ENGINE *e);
+int ENGINE_set_default_ECDH(ENGINE *e);
+int ENGINE_set_default_ECDSA(ENGINE *e);
+int ENGINE_set_default_DH(ENGINE *e);
+int ENGINE_set_default_RAND(ENGINE *e);
+int ENGINE_set_default_ciphers(ENGINE *e);
+int ENGINE_set_default_digests(ENGINE *e);
+int ENGINE_set_default_pkey_meths(ENGINE *e);
+int ENGINE_set_default_pkey_asn1_meths(ENGINE *e);
+
+/* The combination "set" - the flags are bitwise "OR"d from the
+ * ENGINE_METHOD_*** defines above. As with the "ENGINE_register_complete()"
+ * function, this function can result in unnecessary static linkage. If your
+ * application requires only specific functionality, consider using more
+ * selective functions. */
+int ENGINE_set_default(ENGINE *e, unsigned int flags);
+
+void ENGINE_add_conf_module(void);
+
+/* Deprecated functions ... */
+/* int ENGINE_clear_defaults(void); */
+
+/**************************/
+/* DYNAMIC ENGINE SUPPORT */
+/**************************/
+
+/* Binary/behaviour compatibility levels */
+#define OSSL_DYNAMIC_VERSION		(unsigned long)0x00020000
+/* Binary versions older than this are too old for us (whether we're a loader or
+ * a loadee) */
+#define OSSL_DYNAMIC_OLDEST		(unsigned long)0x00020000
+
+/* When compiling an ENGINE entirely as an external shared library, loadable by
+ * the "dynamic" ENGINE, these types are needed. The 'dynamic_fns' structure
+ * type provides the calling application's (or library's) error functionality
+ * and memory management function pointers to the loaded library. These should
+ * be used/set in the loaded library code so that the loading application's
+ * 'state' will be used/changed in all operations. The 'static_state' pointer
+ * allows the loaded library to know if it shares the same static data as the
+ * calling application (or library), and thus whether these callbacks need to be
+ * set or not. */
+typedef void *(*dyn_MEM_malloc_cb)(size_t);
+typedef void *(*dyn_MEM_realloc_cb)(void *, size_t);
+typedef void (*dyn_MEM_free_cb)(void *);
+typedef struct st_dynamic_MEM_fns {
+	dyn_MEM_malloc_cb			malloc_cb;
+	dyn_MEM_realloc_cb			realloc_cb;
+	dyn_MEM_free_cb				free_cb;
+	} dynamic_MEM_fns;
+/* FIXME: Perhaps the memory and locking code (crypto.h) should declare and use
+ * these types so we (and any other dependant code) can simplify a bit?? */
+typedef void (*dyn_lock_locking_cb)(int,int,const char *,int);
+typedef int (*dyn_lock_add_lock_cb)(int*,int,int,const char *,int);
+typedef struct CRYPTO_dynlock_value *(*dyn_dynlock_create_cb)(
+						const char *,int);
+typedef void (*dyn_dynlock_lock_cb)(int,struct CRYPTO_dynlock_value *,
+						const char *,int);
+typedef void (*dyn_dynlock_destroy_cb)(struct CRYPTO_dynlock_value *,
+						const char *,int);
+typedef struct st_dynamic_LOCK_fns {
+	dyn_lock_locking_cb			lock_locking_cb;
+	dyn_lock_add_lock_cb			lock_add_lock_cb;
+	dyn_dynlock_create_cb			dynlock_create_cb;
+	dyn_dynlock_lock_cb			dynlock_lock_cb;
+	dyn_dynlock_destroy_cb			dynlock_destroy_cb;
+	} dynamic_LOCK_fns;
+/* The top-level structure */
+typedef struct st_dynamic_fns {
+	void 					*static_state;
+	const ERR_FNS				*err_fns;
+	const CRYPTO_EX_DATA_IMPL		*ex_data_fns;
+	dynamic_MEM_fns				mem_fns;
+	dynamic_LOCK_fns			lock_fns;
+	} dynamic_fns;
+
+/* The version checking function should be of this prototype. NB: The
+ * ossl_version value passed in is the OSSL_DYNAMIC_VERSION of the loading code.
+ * If this function returns zero, it indicates a (potential) version
+ * incompatibility and the loaded library doesn't believe it can proceed.
+ * Otherwise, the returned value is the (latest) version supported by the
+ * loading library. The loader may still decide that the loaded code's version
+ * is unsatisfactory and could veto the load. The function is expected to
+ * be implemented with the symbol name "v_check", and a default implementation
+ * can be fully instantiated with IMPLEMENT_DYNAMIC_CHECK_FN(). */
+typedef unsigned long (*dynamic_v_check_fn)(unsigned long ossl_version);
+#define IMPLEMENT_DYNAMIC_CHECK_FN() \
+	OPENSSL_EXPORT unsigned long v_check(unsigned long v); \
+	OPENSSL_EXPORT unsigned long v_check(unsigned long v) { \
+		if(v >= OSSL_DYNAMIC_OLDEST) return OSSL_DYNAMIC_VERSION; \
+		return 0; }
+
+/* This function is passed the ENGINE structure to initialise with its own
+ * function and command settings. It should not adjust the structural or
+ * functional reference counts. If this function returns zero, (a) the load will
+ * be aborted, (b) the previous ENGINE state will be memcpy'd back onto the
+ * structure, and (c) the shared library will be unloaded. So implementations
+ * should do their own internal cleanup in failure circumstances otherwise they
+ * could leak. The 'id' parameter, if non-NULL, represents the ENGINE id that
+ * the loader is looking for. If this is NULL, the shared library can choose to
+ * return failure or to initialise a 'default' ENGINE. If non-NULL, the shared
+ * library must initialise only an ENGINE matching the passed 'id'. The function
+ * is expected to be implemented with the symbol name "bind_engine". A standard
+ * implementation can be instantiated with IMPLEMENT_DYNAMIC_BIND_FN(fn) where
+ * the parameter 'fn' is a callback function that populates the ENGINE structure
+ * and returns an int value (zero for failure). 'fn' should have prototype;
+ *    [static] int fn(ENGINE *e, const char *id); */
+typedef int (*dynamic_bind_engine)(ENGINE *e, const char *id,
+				const dynamic_fns *fns);
+#define IMPLEMENT_DYNAMIC_BIND_FN(fn) \
+	OPENSSL_EXPORT \
+	int bind_engine(ENGINE *e, const char *id, const dynamic_fns *fns); \
+	OPENSSL_EXPORT \
+	int bind_engine(ENGINE *e, const char *id, const dynamic_fns *fns) { \
+		if(ENGINE_get_static_state() == fns->static_state) goto skip_cbs; \
+		if(!CRYPTO_set_mem_functions(fns->mem_fns.malloc_cb, \
+			fns->mem_fns.realloc_cb, fns->mem_fns.free_cb)) \
+			return 0; \
+		CRYPTO_set_locking_callback(fns->lock_fns.lock_locking_cb); \
+		CRYPTO_set_add_lock_callback(fns->lock_fns.lock_add_lock_cb); \
+		CRYPTO_set_dynlock_create_callback(fns->lock_fns.dynlock_create_cb); \
+		CRYPTO_set_dynlock_lock_callback(fns->lock_fns.dynlock_lock_cb); \
+		CRYPTO_set_dynlock_destroy_callback(fns->lock_fns.dynlock_destroy_cb); \
+		if(!CRYPTO_set_ex_data_implementation(fns->ex_data_fns)) \
+			return 0; \
+		if(!ERR_set_implementation(fns->err_fns)) return 0; \
+	skip_cbs: \
+		if(!fn(e,id)) return 0; \
+		return 1; }
+
+/* If the loading application (or library) and the loaded ENGINE library share
+ * the same static data (eg. they're both dynamically linked to the same
+ * libcrypto.so) we need a way to avoid trying to set system callbacks - this
+ * would fail, and for the same reason that it's unnecessary to try. If the
+ * loaded ENGINE has (or gets from through the loader) its own copy of the
+ * libcrypto static data, we will need to set the callbacks. The easiest way to
+ * detect this is to have a function that returns a pointer to some static data
+ * and let the loading application and loaded ENGINE compare their respective
+ * values. */
+void *ENGINE_get_static_state(void);
+
+#if defined(__OpenBSD__) || defined(__FreeBSD__) || defined(HAVE_CRYPTODEV)
+void ENGINE_setup_bsd_cryptodev(void);
+#endif
+
+/* BEGIN ERROR CODES */
+/* The following lines are auto generated by the script mkerr.pl. Any changes
+ * made after this point may be overwritten when the script is next run.
+ */
+void ERR_load_ENGINE_strings(void);
+
+/* Error codes for the ENGINE functions. */
+
+/* Function codes. */
+#define ENGINE_F_DYNAMIC_CTRL				 180
+#define ENGINE_F_DYNAMIC_GET_DATA_CTX			 181
+#define ENGINE_F_DYNAMIC_LOAD				 182
+#define ENGINE_F_DYNAMIC_SET_DATA_CTX			 183
+#define ENGINE_F_ENGINE_ADD				 105
+#define ENGINE_F_ENGINE_BY_ID				 106
+#define ENGINE_F_ENGINE_CMD_IS_EXECUTABLE		 170
+#define ENGINE_F_ENGINE_CTRL				 142
+#define ENGINE_F_ENGINE_CTRL_CMD			 178
+#define ENGINE_F_ENGINE_CTRL_CMD_STRING			 171
+#define ENGINE_F_ENGINE_FINISH				 107
+#define ENGINE_F_ENGINE_FREE_UTIL			 108
+#define ENGINE_F_ENGINE_GET_CIPHER			 185
+#define ENGINE_F_ENGINE_GET_DEFAULT_TYPE		 177
+#define ENGINE_F_ENGINE_GET_DIGEST			 186
+#define ENGINE_F_ENGINE_GET_NEXT			 115
+#define ENGINE_F_ENGINE_GET_PKEY_ASN1_METH		 193
+#define ENGINE_F_ENGINE_GET_PKEY_METH			 192
+#define ENGINE_F_ENGINE_GET_PREV			 116
+#define ENGINE_F_ENGINE_INIT				 119
+#define ENGINE_F_ENGINE_LIST_ADD			 120
+#define ENGINE_F_ENGINE_LIST_REMOVE			 121
+#define ENGINE_F_ENGINE_LOAD_PRIVATE_KEY		 150
+#define ENGINE_F_ENGINE_LOAD_PUBLIC_KEY			 151
+#define ENGINE_F_ENGINE_LOAD_SSL_CLIENT_CERT		 194
+#define ENGINE_F_ENGINE_NEW				 122
+#define ENGINE_F_ENGINE_REMOVE				 123
+#define ENGINE_F_ENGINE_SET_DEFAULT_STRING		 189
+#define ENGINE_F_ENGINE_SET_DEFAULT_TYPE		 126
+#define ENGINE_F_ENGINE_SET_ID				 129
+#define ENGINE_F_ENGINE_SET_NAME			 130
+#define ENGINE_F_ENGINE_TABLE_REGISTER			 184
+#define ENGINE_F_ENGINE_UNLOAD_KEY			 152
+#define ENGINE_F_ENGINE_UNLOCKED_FINISH			 191
+#define ENGINE_F_ENGINE_UP_REF				 190
+#define ENGINE_F_INT_CTRL_HELPER			 172
+#define ENGINE_F_INT_ENGINE_CONFIGURE			 188
+#define ENGINE_F_INT_ENGINE_MODULE_INIT			 187
+#define ENGINE_F_LOG_MESSAGE				 141
+
+/* Reason codes. */
+#define ENGINE_R_ALREADY_LOADED				 100
+#define ENGINE_R_ARGUMENT_IS_NOT_A_NUMBER		 133
+#define ENGINE_R_CMD_NOT_EXECUTABLE			 134
+#define ENGINE_R_COMMAND_TAKES_INPUT			 135
+#define ENGINE_R_COMMAND_TAKES_NO_INPUT			 136
+#define ENGINE_R_CONFLICTING_ENGINE_ID			 103
+#define ENGINE_R_CTRL_COMMAND_NOT_IMPLEMENTED		 119
+#define ENGINE_R_DH_NOT_IMPLEMENTED			 139
+#define ENGINE_R_DSA_NOT_IMPLEMENTED			 140
+#define ENGINE_R_DSO_FAILURE				 104
+#define ENGINE_R_DSO_NOT_FOUND				 132
+#define ENGINE_R_ENGINES_SECTION_ERROR			 148
+#define ENGINE_R_ENGINE_CONFIGURATION_ERROR		 102
+#define ENGINE_R_ENGINE_IS_NOT_IN_LIST			 105
+#define ENGINE_R_ENGINE_SECTION_ERROR			 149
+#define ENGINE_R_FAILED_LOADING_PRIVATE_KEY		 128
+#define ENGINE_R_FAILED_LOADING_PUBLIC_KEY		 129
+#define ENGINE_R_FINISH_FAILED				 106
+#define ENGINE_R_GET_HANDLE_FAILED			 107
+#define ENGINE_R_ID_OR_NAME_MISSING			 108
+#define ENGINE_R_INIT_FAILED				 109
+#define ENGINE_R_INTERNAL_LIST_ERROR			 110
+#define ENGINE_R_INVALID_ARGUMENT			 143
+#define ENGINE_R_INVALID_CMD_NAME			 137
+#define ENGINE_R_INVALID_CMD_NUMBER			 138
+#define ENGINE_R_INVALID_INIT_VALUE			 151
+#define ENGINE_R_INVALID_STRING				 150
+#define ENGINE_R_NOT_INITIALISED			 117
+#define ENGINE_R_NOT_LOADED				 112
+#define ENGINE_R_NO_CONTROL_FUNCTION			 120
+#define ENGINE_R_NO_INDEX				 144
+#define ENGINE_R_NO_LOAD_FUNCTION			 125
+#define ENGINE_R_NO_REFERENCE				 130
+#define ENGINE_R_NO_SUCH_ENGINE				 116
+#define ENGINE_R_NO_UNLOAD_FUNCTION			 126
+#define ENGINE_R_PROVIDE_PARAMETERS			 113
+#define ENGINE_R_RSA_NOT_IMPLEMENTED			 141
+#define ENGINE_R_UNIMPLEMENTED_CIPHER			 146
+#define ENGINE_R_UNIMPLEMENTED_DIGEST			 147
+#define ENGINE_R_UNIMPLEMENTED_PUBLIC_KEY_METHOD	 101
+#define ENGINE_R_VERSION_INCOMPATIBILITY		 145
+
+#ifdef  __cplusplus
+}
+#endif
+#endif