aboutsummaryrefslogtreecommitdiff
path: root/openssl/crypto/rc4/asm/rc4-586.pl
diff options
context:
space:
mode:
Diffstat (limited to 'openssl/crypto/rc4/asm/rc4-586.pl')
-rw-r--r--openssl/crypto/rc4/asm/rc4-586.pl448
1 files changed, 244 insertions, 204 deletions
diff --git a/openssl/crypto/rc4/asm/rc4-586.pl b/openssl/crypto/rc4/asm/rc4-586.pl
index ef7eee766..38a44a70e 100644
--- a/openssl/crypto/rc4/asm/rc4-586.pl
+++ b/openssl/crypto/rc4/asm/rc4-586.pl
@@ -1,14 +1,21 @@
-#!/usr/local/bin/perl
+#!/usr/bin/env perl
+
+# ====================================================================
+# [Re]written by Andy Polyakov <appro@fy.chalmers.se> for the OpenSSL
+# project. The module is, however, dual licensed under OpenSSL and
+# CRYPTOGAMS licenses depending on where you obtain it. For further
+# details see http://www.openssl.org/~appro/cryptogams/.
+# ====================================================================
# At some point it became apparent that the original SSLeay RC4
-# assembler implementation performs suboptimaly on latest IA-32
+# assembler implementation performs suboptimally on latest IA-32
# microarchitectures. After re-tuning performance has changed as
# following:
#
-# Pentium +0%
-# Pentium III +17%
-# AMD +52%(*)
-# P4 +180%(**)
+# Pentium -10%
+# Pentium III +12%
+# AMD +50%(*)
+# P4 +250%(**)
#
# (*) This number is actually a trade-off:-) It's possible to
# achieve +72%, but at the cost of -48% off PIII performance.
@@ -17,214 +24,247 @@
# For reference! This code delivers ~80% of rc4-amd64.pl
# performance on the same Opteron machine.
# (**) This number requires compressed key schedule set up by
-# RC4_set_key and therefore doesn't apply to 0.9.7 [option for
-# compressed key schedule is implemented in 0.9.8 and later,
-# see commentary section in rc4_skey.c for further details].
+# RC4_set_key [see commentary below for further details].
#
# <appro@fy.chalmers.se>
-push(@INC,"perlasm","../../perlasm");
+$0 =~ m/(.*[\/\\])[^\/\\]+$/; $dir=$1;
+push(@INC,"${dir}","${dir}../../perlasm");
require "x86asm.pl";
&asm_init($ARGV[0],"rc4-586.pl");
-$x="eax";
-$y="ebx";
+$xx="eax";
+$yy="ebx";
$tx="ecx";
$ty="edx";
-$in="esi";
-$out="edi";
-$d="ebp";
-
-&RC4("RC4");
-
-&asm_finish();
-
-sub RC4_loop
- {
- local($n,$p,$char)=@_;
-
- &comment("Round $n");
-
- if ($char)
- {
- if ($p >= 0)
- {
- &mov($ty, &swtmp(2));
- &cmp($ty, $in);
- &jbe(&label("finished"));
- &inc($in);
- }
- else
- {
- &add($ty, 8);
- &inc($in);
- &cmp($ty, $in);
- &jb(&label("finished"));
- &mov(&swtmp(2), $ty);
- }
- }
- # Moved out
- # &mov( $tx, &DWP(0,$d,$x,4)) if $p < 0;
-
- &add( &LB($y), &LB($tx));
- &mov( $ty, &DWP(0,$d,$y,4));
- # XXX
- &mov( &DWP(0,$d,$x,4),$ty);
- &add( $ty, $tx);
- &mov( &DWP(0,$d,$y,4),$tx);
- &and( $ty, 0xff);
- &inc( &LB($x)); # NEXT ROUND
- &mov( $tx, &DWP(0,$d,$x,4)) if $p < 1; # NEXT ROUND
- &mov( $ty, &DWP(0,$d,$ty,4));
-
- if (!$char)
- {
- #moved up into last round
- if ($p >= 1)
- {
- &add( $out, 8)
- }
- &movb( &BP($n,"esp","",0), &LB($ty));
- }
- else
- {
- # Note in+=8 has occured
- &movb( &HB($ty), &BP(-1,$in,"",0));
- # XXX
- &xorb(&LB($ty), &HB($ty));
- # XXX
- &movb(&BP($n,$out,"",0),&LB($ty));
- }
+$inp="esi";
+$out="ebp";
+$dat="edi";
+
+sub RC4_loop {
+ my $i=shift;
+ my $func = ($i==0)?*mov:*or;
+
+ &add (&LB($yy),&LB($tx));
+ &mov ($ty,&DWP(0,$dat,$yy,4));
+ &mov (&DWP(0,$dat,$yy,4),$tx);
+ &mov (&DWP(0,$dat,$xx,4),$ty);
+ &add ($ty,$tx);
+ &inc (&LB($xx));
+ &and ($ty,0xff);
+ &ror ($out,8) if ($i!=0);
+ if ($i<3) {
+ &mov ($tx,&DWP(0,$dat,$xx,4));
+ } else {
+ &mov ($tx,&wparam(3)); # reload [re-biased] out
}
-
-
-sub RC4
- {
- local($name)=@_;
-
- &function_begin_B($name,"");
-
- &mov($ty,&wparam(1)); # len
- &cmp($ty,0);
- &jne(&label("proceed"));
- &ret();
- &set_label("proceed");
-
- &comment("");
-
- &push("ebp");
- &push("ebx");
- &push("esi");
- &xor( $x, $x); # avoid partial register stalls
- &push("edi");
- &xor( $y, $y); # avoid partial register stalls
- &mov( $d, &wparam(0)); # key
- &mov( $in, &wparam(2));
-
- &movb( &LB($x), &BP(0,$d,"",1));
- &movb( &LB($y), &BP(4,$d,"",1));
-
- &mov( $out, &wparam(3));
- &inc( &LB($x));
-
- &stack_push(3); # 3 temp variables
- &add( $d, 8);
-
- # detect compressed schedule, see commentary section in rc4_skey.c...
- # in 0.9.7 context ~50 bytes below RC4_CHAR label remain redundant,
- # as compressed key schedule is set up in 0.9.8 and later.
- &cmp(&DWP(256,$d),-1);
- &je(&label("RC4_CHAR"));
-
- &lea( $ty, &DWP(-8,$ty,$in));
-
- # check for 0 length input
-
- &mov( &swtmp(2), $ty); # this is now address to exit at
- &mov( $tx, &DWP(0,$d,$x,4));
-
- &cmp( $ty, $in);
- &jb( &label("end")); # less than 8 bytes
-
- &set_label("start");
-
- # filling DELAY SLOT
- &add( $in, 8);
-
- &RC4_loop(0,-1,0);
- &RC4_loop(1,0,0);
- &RC4_loop(2,0,0);
- &RC4_loop(3,0,0);
- &RC4_loop(4,0,0);
- &RC4_loop(5,0,0);
- &RC4_loop(6,0,0);
- &RC4_loop(7,1,0);
-
- &comment("apply the cipher text");
- # xor the cipher data with input
-
- #&add( $out, 8); #moved up into last round
-
- &mov( $tx, &swtmp(0));
- &mov( $ty, &DWP(-8,$in,"",0));
- &xor( $tx, $ty);
- &mov( $ty, &DWP(-4,$in,"",0));
- &mov( &DWP(-8,$out,"",0), $tx);
- &mov( $tx, &swtmp(1));
- &xor( $tx, $ty);
- &mov( $ty, &swtmp(2)); # load end ptr;
- &mov( &DWP(-4,$out,"",0), $tx);
- &mov( $tx, &DWP(0,$d,$x,4));
- &cmp($in, $ty);
- &jbe(&label("start"));
-
- &set_label("end");
-
- # There is quite a bit of extra crap in RC4_loop() for this
- # first round
- &RC4_loop(0,-1,1);
- &RC4_loop(1,0,1);
- &RC4_loop(2,0,1);
- &RC4_loop(3,0,1);
- &RC4_loop(4,0,1);
- &RC4_loop(5,0,1);
- &RC4_loop(6,1,1);
-
- &jmp(&label("finished"));
-
- &align(16);
- # this is essentially Intel P4 specific codepath, see rc4_skey.c,
- # and is engaged in 0.9.8 and later context...
- &set_label("RC4_CHAR");
-
- &lea ($ty,&DWP(0,$in,$ty));
- &mov (&swtmp(2),$ty);
- &movz ($tx,&BP(0,$d,$x));
-
+ &$func ($out,&DWP(0,$dat,$ty,4));
+}
+
+# void RC4(RC4_KEY *key,size_t len,const unsigned char *inp,unsigned char *out);
+&function_begin("RC4");
+ &mov ($dat,&wparam(0)); # load key schedule pointer
+ &mov ($ty, &wparam(1)); # load len
+ &mov ($inp,&wparam(2)); # load inp
+ &mov ($out,&wparam(3)); # load out
+
+ &xor ($xx,$xx); # avoid partial register stalls
+ &xor ($yy,$yy);
+
+ &cmp ($ty,0); # safety net
+ &je (&label("abort"));
+
+ &mov (&LB($xx),&BP(0,$dat)); # load key->x
+ &mov (&LB($yy),&BP(4,$dat)); # load key->y
+ &add ($dat,8);
+
+ &lea ($tx,&DWP(0,$inp,$ty));
+ &sub ($out,$inp); # re-bias out
+ &mov (&wparam(1),$tx); # save input+len
+
+ &inc (&LB($xx));
+
+ # detect compressed key schedule...
+ &cmp (&DWP(256,$dat),-1);
+ &je (&label("RC4_CHAR"));
+
+ &mov ($tx,&DWP(0,$dat,$xx,4));
+
+ &and ($ty,-4); # how many 4-byte chunks?
+ &jz (&label("loop1"));
+
+ &lea ($ty,&DWP(-4,$inp,$ty));
+ &mov (&wparam(2),$ty); # save input+(len/4)*4-4
+ &mov (&wparam(3),$out); # $out as accumulator in this loop
+
+ &set_label("loop4",16);
+ for ($i=0;$i<4;$i++) { RC4_loop($i); }
+ &ror ($out,8);
+ &xor ($out,&DWP(0,$inp));
+ &cmp ($inp,&wparam(2)); # compare to input+(len/4)*4-4
+ &mov (&DWP(0,$tx,$inp),$out);# $tx holds re-biased out here
+ &lea ($inp,&DWP(4,$inp));
+ &mov ($tx,&DWP(0,$dat,$xx,4));
+ &jb (&label("loop4"));
+
+ &cmp ($inp,&wparam(1)); # compare to input+len
+ &je (&label("done"));
+ &mov ($out,&wparam(3)); # restore $out
+
+ &set_label("loop1",16);
+ &add (&LB($yy),&LB($tx));
+ &mov ($ty,&DWP(0,$dat,$yy,4));
+ &mov (&DWP(0,$dat,$yy,4),$tx);
+ &mov (&DWP(0,$dat,$xx,4),$ty);
+ &add ($ty,$tx);
+ &inc (&LB($xx));
+ &and ($ty,0xff);
+ &mov ($ty,&DWP(0,$dat,$ty,4));
+ &xor (&LB($ty),&BP(0,$inp));
+ &lea ($inp,&DWP(1,$inp));
+ &mov ($tx,&DWP(0,$dat,$xx,4));
+ &cmp ($inp,&wparam(1)); # compare to input+len
+ &mov (&BP(-1,$out,$inp),&LB($ty));
+ &jb (&label("loop1"));
+
+ &jmp (&label("done"));
+
+# this is essentially Intel P4 specific codepath...
+&set_label("RC4_CHAR",16);
+ &movz ($tx,&BP(0,$dat,$xx));
# strangely enough unrolled loop performs over 20% slower...
- &set_label("RC4_CHAR_loop");
- &add (&LB($y),&LB($tx));
- &movz ($ty,&BP(0,$d,$y));
- &movb (&BP(0,$d,$y),&LB($tx));
- &movb (&BP(0,$d,$x),&LB($ty));
+ &set_label("cloop1");
+ &add (&LB($yy),&LB($tx));
+ &movz ($ty,&BP(0,$dat,$yy));
+ &mov (&BP(0,$dat,$yy),&LB($tx));
+ &mov (&BP(0,$dat,$xx),&LB($ty));
&add (&LB($ty),&LB($tx));
- &movz ($ty,&BP(0,$d,$ty));
- &add (&LB($x),1);
- &xorb (&LB($ty),&BP(0,$in));
- &lea ($in,&DWP(1,$in));
- &movz ($tx,&BP(0,$d,$x));
- &cmp ($in,&swtmp(2));
- &movb (&BP(0,$out),&LB($ty));
- &lea ($out,&DWP(1,$out));
- &jb (&label("RC4_CHAR_loop"));
-
- &set_label("finished");
- &dec( $x);
- &stack_pop(3);
- &movb( &BP(-4,$d,"",0),&LB($y));
- &movb( &BP(-8,$d,"",0),&LB($x));
-
- &function_end($name);
- }
+ &movz ($ty,&BP(0,$dat,$ty));
+ &add (&LB($xx),1);
+ &xor (&LB($ty),&BP(0,$inp));
+ &lea ($inp,&DWP(1,$inp));
+ &movz ($tx,&BP(0,$dat,$xx));
+ &cmp ($inp,&wparam(1));
+ &mov (&BP(-1,$out,$inp),&LB($ty));
+ &jb (&label("cloop1"));
+
+&set_label("done");
+ &dec (&LB($xx));
+ &mov (&BP(-4,$dat),&LB($yy)); # save key->y
+ &mov (&BP(-8,$dat),&LB($xx)); # save key->x
+&set_label("abort");
+&function_end("RC4");
+
+########################################################################
+
+$inp="esi";
+$out="edi";
+$idi="ebp";
+$ido="ecx";
+$idx="edx";
+
+&external_label("OPENSSL_ia32cap_P");
+
+# void RC4_set_key(RC4_KEY *key,int len,const unsigned char *data);
+&function_begin("RC4_set_key");
+ &mov ($out,&wparam(0)); # load key
+ &mov ($idi,&wparam(1)); # load len
+ &mov ($inp,&wparam(2)); # load data
+ &picmeup($idx,"OPENSSL_ia32cap_P");
+
+ &lea ($out,&DWP(2*4,$out)); # &key->data
+ &lea ($inp,&DWP(0,$inp,$idi)); # $inp to point at the end
+ &neg ($idi);
+ &xor ("eax","eax");
+ &mov (&DWP(-4,$out),$idi); # borrow key->y
+
+ &bt (&DWP(0,$idx),20); # check for bit#20
+ &jc (&label("c1stloop"));
+
+&set_label("w1stloop",16);
+ &mov (&DWP(0,$out,"eax",4),"eax"); # key->data[i]=i;
+ &add (&LB("eax"),1); # i++;
+ &jnc (&label("w1stloop"));
+
+ &xor ($ido,$ido);
+ &xor ($idx,$idx);
+
+&set_label("w2ndloop",16);
+ &mov ("eax",&DWP(0,$out,$ido,4));
+ &add (&LB($idx),&BP(0,$inp,$idi));
+ &add (&LB($idx),&LB("eax"));
+ &add ($idi,1);
+ &mov ("ebx",&DWP(0,$out,$idx,4));
+ &jnz (&label("wnowrap"));
+ &mov ($idi,&DWP(-4,$out));
+ &set_label("wnowrap");
+ &mov (&DWP(0,$out,$idx,4),"eax");
+ &mov (&DWP(0,$out,$ido,4),"ebx");
+ &add (&LB($ido),1);
+ &jnc (&label("w2ndloop"));
+&jmp (&label("exit"));
+
+# Unlike all other x86 [and x86_64] implementations, Intel P4 core
+# [including EM64T] was found to perform poorly with above "32-bit" key
+# schedule, a.k.a. RC4_INT. Performance improvement for IA-32 hand-coded
+# assembler turned out to be 3.5x if re-coded for compressed 8-bit one,
+# a.k.a. RC4_CHAR! It's however inappropriate to just switch to 8-bit
+# schedule for x86[_64], because non-P4 implementations suffer from
+# significant performance losses then, e.g. PIII exhibits >2x
+# deterioration, and so does Opteron. In order to assure optimal
+# all-round performance, we detect P4 at run-time and set up compressed
+# key schedule, which is recognized by RC4 procedure.
+
+&set_label("c1stloop",16);
+ &mov (&BP(0,$out,"eax"),&LB("eax")); # key->data[i]=i;
+ &add (&LB("eax"),1); # i++;
+ &jnc (&label("c1stloop"));
+
+ &xor ($ido,$ido);
+ &xor ($idx,$idx);
+ &xor ("ebx","ebx");
+
+&set_label("c2ndloop",16);
+ &mov (&LB("eax"),&BP(0,$out,$ido));
+ &add (&LB($idx),&BP(0,$inp,$idi));
+ &add (&LB($idx),&LB("eax"));
+ &add ($idi,1);
+ &mov (&LB("ebx"),&BP(0,$out,$idx));
+ &jnz (&label("cnowrap"));
+ &mov ($idi,&DWP(-4,$out));
+ &set_label("cnowrap");
+ &mov (&BP(0,$out,$idx),&LB("eax"));
+ &mov (&BP(0,$out,$ido),&LB("ebx"));
+ &add (&LB($ido),1);
+ &jnc (&label("c2ndloop"));
+
+ &mov (&DWP(256,$out),-1); # mark schedule as compressed
+
+&set_label("exit");
+ &xor ("eax","eax");
+ &mov (&DWP(-8,$out),"eax"); # key->x=0;
+ &mov (&DWP(-4,$out),"eax"); # key->y=0;
+&function_end("RC4_set_key");
+
+# const char *RC4_options(void);
+&function_begin_B("RC4_options");
+ &call (&label("pic_point"));
+&set_label("pic_point");
+ &blindpop("eax");
+ &lea ("eax",&DWP(&label("opts")."-".&label("pic_point"),"eax"));
+ &picmeup("edx","OPENSSL_ia32cap_P");
+ &bt (&DWP(0,"edx"),20);
+ &jnc (&label("skip"));
+ &add ("eax",12);
+ &set_label("skip");
+ &ret ();
+&set_label("opts",64);
+&asciz ("rc4(4x,int)");
+&asciz ("rc4(1x,char)");
+&asciz ("RC4 for x86, CRYPTOGAMS by <appro\@openssl.org>");
+&align (64);
+&function_end_B("RC4_options");
+
+&asm_finish();