aboutsummaryrefslogtreecommitdiff
path: root/openssl/crypto/rc4
diff options
context:
space:
mode:
Diffstat (limited to 'openssl/crypto/rc4')
-rw-r--r--openssl/crypto/rc4/Makefile18
-rw-r--r--openssl/crypto/rc4/asm/rc4-586.pl162
-rw-r--r--openssl/crypto/rc4/asm/rc4-md5-x86_64.pl631
-rw-r--r--openssl/crypto/rc4/asm/rc4-parisc.pl313
-rw-r--r--openssl/crypto/rc4/asm/rc4-s390x.pl39
-rw-r--r--openssl/crypto/rc4/asm/rc4-x86_64.pl290
-rw-r--r--openssl/crypto/rc4/rc4.h1
-rw-r--r--openssl/crypto/rc4/rc4_skey.c36
-rw-r--r--openssl/crypto/rc4/rc4_utl.c62
-rw-r--r--openssl/crypto/rc4/rc4test.c6
10 files changed, 1444 insertions, 114 deletions
diff --git a/openssl/crypto/rc4/Makefile b/openssl/crypto/rc4/Makefile
index 264451a21..1614d4796 100644
--- a/openssl/crypto/rc4/Makefile
+++ b/openssl/crypto/rc4/Makefile
@@ -21,8 +21,8 @@ TEST=rc4test.c
APPS=
LIB=$(TOP)/libcrypto.a
-LIBSRC=rc4_skey.c rc4_enc.c
-LIBOBJ=$(RC4_ENC)
+LIBSRC=rc4_skey.c rc4_enc.c rc4_utl.c
+LIBOBJ=$(RC4_ENC) rc4_utl.o
SRC= $(LIBSRC)
@@ -46,12 +46,14 @@ rc4-586.s: asm/rc4-586.pl ../perlasm/x86asm.pl
rc4-x86_64.s: asm/rc4-x86_64.pl
$(PERL) asm/rc4-x86_64.pl $(PERLASM_SCHEME) > $@
+rc4-md5-x86_64.s: asm/rc4-md5-x86_64.pl
+ $(PERL) asm/rc4-md5-x86_64.pl $(PERLASM_SCHEME) > $@
rc4-ia64.S: asm/rc4-ia64.pl
$(PERL) asm/rc4-ia64.pl $(CFLAGS) > $@
-rc4-s390x.s: asm/rc4-s390x.pl
- $(PERL) asm/rc4-s390x.pl > $@
+rc4-parisc.s: asm/rc4-parisc.pl
+ $(PERL) asm/rc4-parisc.pl $(PERLASM_SCHEME) $@
rc4-ia64.s: rc4-ia64.S
@case `awk '/^#define RC4_INT/{print$$NF}' $(TOP)/include/openssl/opensslconf.h` in \
@@ -60,6 +62,9 @@ rc4-ia64.s: rc4-ia64.S
*) exit 1 ;; \
esac
+# GNU make "catch all"
+rc4-%.s: asm/rc4-%.pl; $(PERL) $< $(PERLASM_SCHEME) $@
+
files:
$(PERL) $(TOP)/util/files.pl Makefile >> $(TOP)/MINFO
@@ -113,3 +118,8 @@ rc4_skey.o: ../../include/openssl/opensslv.h ../../include/openssl/ossl_typ.h
rc4_skey.o: ../../include/openssl/rc4.h ../../include/openssl/safestack.h
rc4_skey.o: ../../include/openssl/stack.h ../../include/openssl/symhacks.h
rc4_skey.o: ../cryptlib.h rc4_locl.h rc4_skey.c
+rc4_utl.o: ../../include/openssl/crypto.h ../../include/openssl/e_os2.h
+rc4_utl.o: ../../include/openssl/opensslconf.h ../../include/openssl/opensslv.h
+rc4_utl.o: ../../include/openssl/ossl_typ.h ../../include/openssl/rc4.h
+rc4_utl.o: ../../include/openssl/safestack.h ../../include/openssl/stack.h
+rc4_utl.o: ../../include/openssl/symhacks.h rc4_utl.c
diff --git a/openssl/crypto/rc4/asm/rc4-586.pl b/openssl/crypto/rc4/asm/rc4-586.pl
index 38a44a70e..5c9ac6ad2 100644
--- a/openssl/crypto/rc4/asm/rc4-586.pl
+++ b/openssl/crypto/rc4/asm/rc4-586.pl
@@ -28,6 +28,34 @@
#
# <appro@fy.chalmers.se>
+# May 2011
+#
+# Optimize for Core2 and Westmere [and incidentally Opteron]. Current
+# performance in cycles per processed byte (less is better) and
+# improvement relative to previous version of this module is:
+#
+# Pentium 10.2 # original numbers
+# Pentium III 7.8(*)
+# Intel P4 7.5
+#
+# Opteron 6.1/+20% # new MMX numbers
+# Core2 5.3/+67%(**)
+# Westmere 5.1/+94%(**)
+# Sandy Bridge 5.0/+8%
+# Atom 12.6/+6%
+#
+# (*) PIII can actually deliver 6.6 cycles per byte with MMX code,
+# but this specific code performs poorly on Core2. And vice
+# versa, below MMX/SSE code delivering 5.8/7.1 on Core2 performs
+# poorly on PIII, at 8.0/14.5:-( As PIII is not a "hot" CPU
+# [anymore], I chose to discard PIII-specific code path and opt
+# for original IALU-only code, which is why MMX/SSE code path
+# is guarded by SSE2 bit (see below), not MMX/SSE.
+# (**) Performance vs. block size on Core2 and Westmere had a maximum
+# at ... 64 bytes block size. And it was quite a maximum, 40-60%
+# in comparison to largest 8KB block size. Above improvement
+# coefficients are for the largest block size.
+
$0 =~ m/(.*[\/\\])[^\/\\]+$/; $dir=$1;
push(@INC,"${dir}","${dir}../../perlasm");
require "x86asm.pl";
@@ -62,6 +90,68 @@ sub RC4_loop {
&$func ($out,&DWP(0,$dat,$ty,4));
}
+if ($alt=0) {
+ # >20% faster on Atom and Sandy Bridge[!], 8% faster on Opteron,
+ # but ~40% slower on Core2 and Westmere... Attempt to add movz
+ # brings down Opteron by 25%, Atom and Sandy Bridge by 15%, yet
+ # on Core2 with movz it's almost 20% slower than below alternative
+ # code... Yes, it's a total mess...
+ my @XX=($xx,$out);
+ $RC4_loop_mmx = sub { # SSE actually...
+ my $i=shift;
+ my $j=$i<=0?0:$i>>1;
+ my $mm=$i<=0?"mm0":"mm".($i&1);
+
+ &add (&LB($yy),&LB($tx));
+ &lea (@XX[1],&DWP(1,@XX[0]));
+ &pxor ("mm2","mm0") if ($i==0);
+ &psllq ("mm1",8) if ($i==0);
+ &and (@XX[1],0xff);
+ &pxor ("mm0","mm0") if ($i<=0);
+ &mov ($ty,&DWP(0,$dat,$yy,4));
+ &mov (&DWP(0,$dat,$yy,4),$tx);
+ &pxor ("mm1","mm2") if ($i==0);
+ &mov (&DWP(0,$dat,$XX[0],4),$ty);
+ &add (&LB($ty),&LB($tx));
+ &movd (@XX[0],"mm7") if ($i==0);
+ &mov ($tx,&DWP(0,$dat,@XX[1],4));
+ &pxor ("mm1","mm1") if ($i==1);
+ &movq ("mm2",&QWP(0,$inp)) if ($i==1);
+ &movq (&QWP(-8,(@XX[0],$inp)),"mm1") if ($i==0);
+ &pinsrw ($mm,&DWP(0,$dat,$ty,4),$j);
+
+ push (@XX,shift(@XX)) if ($i>=0);
+ }
+} else {
+ # Using pinsrw here improves performane on Intel CPUs by 2-3%, but
+ # brings down AMD by 7%...
+ $RC4_loop_mmx = sub {
+ my $i=shift;
+
+ &add (&LB($yy),&LB($tx));
+ &psllq ("mm1",8*(($i-1)&7)) if (abs($i)!=1);
+ &mov ($ty,&DWP(0,$dat,$yy,4));
+ &mov (&DWP(0,$dat,$yy,4),$tx);
+ &mov (&DWP(0,$dat,$xx,4),$ty);
+ &inc ($xx);
+ &add ($ty,$tx);
+ &movz ($xx,&LB($xx)); # (*)
+ &movz ($ty,&LB($ty)); # (*)
+ &pxor ("mm2",$i==1?"mm0":"mm1") if ($i>=0);
+ &movq ("mm0",&QWP(0,$inp)) if ($i<=0);
+ &movq (&QWP(-8,($out,$inp)),"mm2") if ($i==0);
+ &mov ($tx,&DWP(0,$dat,$xx,4));
+ &movd ($i>0?"mm1":"mm2",&DWP(0,$dat,$ty,4));
+
+ # (*) This is the key to Core2 and Westmere performance.
+ # Whithout movz out-of-order execution logic confuses
+ # itself and fails to reorder loads and stores. Problem
+ # appears to be fixed in Sandy Bridge...
+ }
+}
+
+&external_label("OPENSSL_ia32cap_P");
+
# void RC4(RC4_KEY *key,size_t len,const unsigned char *inp,unsigned char *out);
&function_begin("RC4");
&mov ($dat,&wparam(0)); # load key schedule pointer
@@ -94,11 +184,56 @@ sub RC4_loop {
&and ($ty,-4); # how many 4-byte chunks?
&jz (&label("loop1"));
+ &test ($ty,-8);
+ &mov (&wparam(3),$out); # $out as accumulator in these loops
+ &jz (&label("go4loop4"));
+
+ &picmeup($out,"OPENSSL_ia32cap_P");
+ &bt (&DWP(0,$out),26); # check SSE2 bit [could have been MMX]
+ &jnc (&label("go4loop4"));
+
+ &mov ($out,&wparam(3)) if (!$alt);
+ &movd ("mm7",&wparam(3)) if ($alt);
+ &and ($ty,-8);
+ &lea ($ty,&DWP(-8,$inp,$ty));
+ &mov (&DWP(-4,$dat),$ty); # save input+(len/8)*8-8
+
+ &$RC4_loop_mmx(-1);
+ &jmp(&label("loop_mmx_enter"));
+
+ &set_label("loop_mmx",16);
+ &$RC4_loop_mmx(0);
+ &set_label("loop_mmx_enter");
+ for ($i=1;$i<8;$i++) { &$RC4_loop_mmx($i); }
+ &mov ($ty,$yy);
+ &xor ($yy,$yy); # this is second key to Core2
+ &mov (&LB($yy),&LB($ty)); # and Westmere performance...
+ &cmp ($inp,&DWP(-4,$dat));
+ &lea ($inp,&DWP(8,$inp));
+ &jb (&label("loop_mmx"));
+
+ if ($alt) {
+ &movd ($out,"mm7");
+ &pxor ("mm2","mm0");
+ &psllq ("mm1",8);
+ &pxor ("mm1","mm2");
+ &movq (&QWP(-8,$out,$inp),"mm1");
+ } else {
+ &psllq ("mm1",56);
+ &pxor ("mm2","mm1");
+ &movq (&QWP(-8,$out,$inp),"mm2");
+ }
+ &emms ();
+
+ &cmp ($inp,&wparam(1)); # compare to input+len
+ &je (&label("done"));
+ &jmp (&label("loop1"));
+
+&set_label("go4loop4",16);
&lea ($ty,&DWP(-4,$inp,$ty));
&mov (&wparam(2),$ty); # save input+(len/4)*4-4
- &mov (&wparam(3),$out); # $out as accumulator in this loop
- &set_label("loop4",16);
+ &set_label("loop4");
for ($i=0;$i<4;$i++) { RC4_loop($i); }
&ror ($out,8);
&xor ($out,&DWP(0,$inp));
@@ -151,7 +286,7 @@ sub RC4_loop {
&set_label("done");
&dec (&LB($xx));
- &mov (&BP(-4,$dat),&LB($yy)); # save key->y
+ &mov (&DWP(-4,$dat),$yy); # save key->y
&mov (&BP(-8,$dat),&LB($xx)); # save key->x
&set_label("abort");
&function_end("RC4");
@@ -164,10 +299,8 @@ $idi="ebp";
$ido="ecx";
$idx="edx";
-&external_label("OPENSSL_ia32cap_P");
-
# void RC4_set_key(RC4_KEY *key,int len,const unsigned char *data);
-&function_begin("RC4_set_key");
+&function_begin("private_RC4_set_key");
&mov ($out,&wparam(0)); # load key
&mov ($idi,&wparam(1)); # load len
&mov ($inp,&wparam(2)); # load data
@@ -245,7 +378,7 @@ $idx="edx";
&xor ("eax","eax");
&mov (&DWP(-8,$out),"eax"); # key->x=0;
&mov (&DWP(-4,$out),"eax"); # key->y=0;
-&function_end("RC4_set_key");
+&function_end("private_RC4_set_key");
# const char *RC4_options(void);
&function_begin_B("RC4_options");
@@ -254,14 +387,21 @@ $idx="edx";
&blindpop("eax");
&lea ("eax",&DWP(&label("opts")."-".&label("pic_point"),"eax"));
&picmeup("edx","OPENSSL_ia32cap_P");
- &bt (&DWP(0,"edx"),20);
- &jnc (&label("skip"));
- &add ("eax",12);
- &set_label("skip");
+ &mov ("edx",&DWP(0,"edx"));
+ &bt ("edx",20);
+ &jc (&label("1xchar"));
+ &bt ("edx",26);
+ &jnc (&label("ret"));
+ &add ("eax",25);
+ &ret ();
+&set_label("1xchar");
+ &add ("eax",12);
+&set_label("ret");
&ret ();
&set_label("opts",64);
&asciz ("rc4(4x,int)");
&asciz ("rc4(1x,char)");
+&asciz ("rc4(8x,mmx)");
&asciz ("RC4 for x86, CRYPTOGAMS by <appro\@openssl.org>");
&align (64);
&function_end_B("RC4_options");
diff --git a/openssl/crypto/rc4/asm/rc4-md5-x86_64.pl b/openssl/crypto/rc4/asm/rc4-md5-x86_64.pl
new file mode 100644
index 000000000..7f684092d
--- /dev/null
+++ b/openssl/crypto/rc4/asm/rc4-md5-x86_64.pl
@@ -0,0 +1,631 @@
+#!/usr/bin/env perl
+#
+# ====================================================================
+# Written by Andy Polyakov <appro@openssl.org> for the OpenSSL
+# project. The module is, however, dual licensed under OpenSSL and
+# CRYPTOGAMS licenses depending on where you obtain it. For further
+# details see http://www.openssl.org/~appro/cryptogams/.
+# ====================================================================
+
+# June 2011
+#
+# This is RC4+MD5 "stitch" implementation. The idea, as spelled in
+# http://download.intel.com/design/intarch/papers/323686.pdf, is that
+# since both algorithms exhibit instruction-level parallelism, ILP,
+# below theoretical maximum, interleaving them would allow to utilize
+# processor resources better and achieve better performance. RC4
+# instruction sequence is virtually identical to rc4-x86_64.pl, which
+# is heavily based on submission by Maxim Perminov, Maxim Locktyukhin
+# and Jim Guilford of Intel. MD5 is fresh implementation aiming to
+# minimize register usage, which was used as "main thread" with RC4
+# weaved into it, one RC4 round per one MD5 round. In addition to the
+# stiched subroutine the script can generate standalone replacement
+# md5_block_asm_data_order and RC4. Below are performance numbers in
+# cycles per processed byte, less is better, for these the standalone
+# subroutines, sum of them, and stitched one:
+#
+# RC4 MD5 RC4+MD5 stitch gain
+# Opteron 6.5(*) 5.4 11.9 7.0 +70%(*)
+# Core2 6.5 5.8 12.3 7.7 +60%
+# Westmere 4.3 5.2 9.5 7.0 +36%
+# Sandy Bridge 4.2 5.5 9.7 6.8 +43%
+# Atom 9.3 6.5 15.8 11.1 +42%
+#
+# (*) rc4-x86_64.pl delivers 5.3 on Opteron, so real improvement
+# is +53%...
+
+my ($rc4,$md5)=(1,1); # what to generate?
+my $D="#" if (!$md5); # if set to "#", MD5 is stitched into RC4(),
+ # but its result is discarded. Idea here is
+ # to be able to use 'openssl speed rc4' for
+ # benchmarking the stitched subroutine...
+
+my $flavour = shift;
+my $output = shift;
+if ($flavour =~ /\./) { $output = $flavour; undef $flavour; }
+
+my $win64=0; $win64=1 if ($flavour =~ /[nm]asm|mingw64/ || $output =~ /\.asm$/);
+
+$0 =~ m/(.*[\/\\])[^\/\\]+$/; my $dir=$1; my $xlate;
+( $xlate="${dir}x86_64-xlate.pl" and -f $xlate ) or
+( $xlate="${dir}../../perlasm/x86_64-xlate.pl" and -f $xlate) or
+die "can't locate x86_64-xlate.pl";
+
+open STDOUT,"| $^X $xlate $flavour $output";
+
+my ($dat,$in0,$out,$ctx,$inp,$len, $func,$nargs);
+
+if ($rc4 && !$md5) {
+ ($dat,$len,$in0,$out) = ("%rdi","%rsi","%rdx","%rcx");
+ $func="RC4"; $nargs=4;
+} elsif ($md5 && !$rc4) {
+ ($ctx,$inp,$len) = ("%rdi","%rsi","%rdx");
+ $func="md5_block_asm_data_order"; $nargs=3;
+} else {
+ ($dat,$in0,$out,$ctx,$inp,$len) = ("%rdi","%rsi","%rdx","%rcx","%r8","%r9");
+ $func="rc4_md5_enc"; $nargs=6;
+ # void rc4_md5_enc(
+ # RC4_KEY *key, #
+ # const void *in0, # RC4 input
+ # void *out, # RC4 output
+ # MD5_CTX *ctx, #
+ # const void *inp, # MD5 input
+ # size_t len); # number of 64-byte blocks
+}
+
+my @K=( 0xd76aa478,0xe8c7b756,0x242070db,0xc1bdceee,
+ 0xf57c0faf,0x4787c62a,0xa8304613,0xfd469501,
+ 0x698098d8,0x8b44f7af,0xffff5bb1,0x895cd7be,
+ 0x6b901122,0xfd987193,0xa679438e,0x49b40821,
+
+ 0xf61e2562,0xc040b340,0x265e5a51,0xe9b6c7aa,
+ 0xd62f105d,0x02441453,0xd8a1e681,0xe7d3fbc8,
+ 0x21e1cde6,0xc33707d6,0xf4d50d87,0x455a14ed,
+ 0xa9e3e905,0xfcefa3f8,0x676f02d9,0x8d2a4c8a,
+
+ 0xfffa3942,0x8771f681,0x6d9d6122,0xfde5380c,
+ 0xa4beea44,0x4bdecfa9,0xf6bb4b60,0xbebfbc70,
+ 0x289b7ec6,0xeaa127fa,0xd4ef3085,0x04881d05,
+ 0xd9d4d039,0xe6db99e5,0x1fa27cf8,0xc4ac5665,
+
+ 0xf4292244,0x432aff97,0xab9423a7,0xfc93a039,
+ 0x655b59c3,0x8f0ccc92,0xffeff47d,0x85845dd1,
+ 0x6fa87e4f,0xfe2ce6e0,0xa3014314,0x4e0811a1,
+ 0xf7537e82,0xbd3af235,0x2ad7d2bb,0xeb86d391 );
+
+my @V=("%r8d","%r9d","%r10d","%r11d"); # MD5 registers
+my $tmp="%r12d";
+
+my @XX=("%rbp","%rsi"); # RC4 registers
+my @TX=("%rax","%rbx");
+my $YY="%rcx";
+my $TY="%rdx";
+
+my $MOD=32; # 16, 32 or 64
+
+$code.=<<___;
+.text
+.align 16
+
+.globl $func
+.type $func,\@function,$nargs
+$func:
+ cmp \$0,$len
+ je .Labort
+ push %rbx
+ push %rbp
+ push %r12
+ push %r13
+ push %r14
+ push %r15
+ sub \$40,%rsp
+.Lbody:
+___
+if ($rc4) {
+$code.=<<___;
+$D#md5# mov $ctx,%r11 # reassign arguments
+ mov $len,%r12
+ mov $in0,%r13
+ mov $out,%r14
+$D#md5# mov $inp,%r15
+___
+ $ctx="%r11" if ($md5); # reassign arguments
+ $len="%r12";
+ $in0="%r13";
+ $out="%r14";
+ $inp="%r15" if ($md5);
+ $inp=$in0 if (!$md5);
+$code.=<<___;
+ xor $XX[0],$XX[0]
+ xor $YY,$YY
+
+ lea 8($dat),$dat
+ mov -8($dat),$XX[0]#b
+ mov -4($dat),$YY#b
+
+ inc $XX[0]#b
+ sub $in0,$out
+ movl ($dat,$XX[0],4),$TX[0]#d
+___
+$code.=<<___ if (!$md5);
+ xor $TX[1],$TX[1]
+ test \$-128,$len
+ jz .Loop1
+ sub $XX[0],$TX[1]
+ and \$`$MOD-1`,$TX[1]
+ jz .Loop${MOD}_is_hot
+ sub $TX[1],$len
+.Loop${MOD}_warmup:
+ add $TX[0]#b,$YY#b
+ movl ($dat,$YY,4),$TY#d
+ movl $TX[0]#d,($dat,$YY,4)
+ movl $TY#d,($dat,$XX[0],4)
+ add $TY#b,$TX[0]#b
+ inc $XX[0]#b
+ movl ($dat,$TX[0],4),$TY#d
+ movl ($dat,$XX[0],4),$TX[0]#d
+ xorb ($in0),$TY#b
+ movb $TY#b,($out,$in0)
+ lea 1($in0),$in0
+ dec $TX[1]
+ jnz .Loop${MOD}_warmup
+
+ mov $YY,$TX[1]
+ xor $YY,$YY
+ mov $TX[1]#b,$YY#b
+
+.Loop${MOD}_is_hot:
+ mov $len,32(%rsp) # save original $len
+ shr \$6,$len # number of 64-byte blocks
+___
+ if ($D && !$md5) { # stitch in dummy MD5
+ $md5=1;
+ $ctx="%r11";
+ $inp="%r15";
+ $code.=<<___;
+ mov %rsp,$ctx
+ mov $in0,$inp
+___
+ }
+}
+$code.=<<___;
+#rc4# add $TX[0]#b,$YY#b
+#rc4# lea ($dat,$XX[0],4),$XX[1]
+ shl \$6,$len
+ add $inp,$len # pointer to the end of input
+ mov $len,16(%rsp)
+
+#md5# mov $ctx,24(%rsp) # save pointer to MD5_CTX
+#md5# mov 0*4($ctx),$V[0] # load current hash value from MD5_CTX
+#md5# mov 1*4($ctx),$V[1]
+#md5# mov 2*4($ctx),$V[2]
+#md5# mov 3*4($ctx),$V[3]
+ jmp .Loop
+
+.align 16
+.Loop:
+#md5# mov $V[0],0*4(%rsp) # put aside current hash value
+#md5# mov $V[1],1*4(%rsp)
+#md5# mov $V[2],2*4(%rsp)
+#md5# mov $V[3],$tmp # forward reference
+#md5# mov $V[3],3*4(%rsp)
+___
+
+sub R0 {
+ my ($i,$a,$b,$c,$d)=@_;
+ my @rot0=(7,12,17,22);
+ my $j=$i%16;
+ my $k=$i%$MOD;
+ my $xmm="%xmm".($j&1);
+ $code.=" movdqu ($in0),%xmm2\n" if ($rc4 && $j==15);
+ $code.=" add \$$MOD,$XX[0]#b\n" if ($rc4 && $j==15 && $k==$MOD-1);
+ $code.=" pxor $xmm,$xmm\n" if ($rc4 && $j<=1);
+ $code.=<<___;
+#rc4# movl ($dat,$YY,4),$TY#d
+#md5# xor $c,$tmp
+#rc4# movl $TX[0]#d,($dat,$YY,4)
+#md5# and $b,$tmp
+#md5# add 4*`$j`($inp),$a
+#rc4# add $TY#b,$TX[0]#b
+#rc4# movl `4*(($k+1)%$MOD)`(`$k==$MOD-1?"$dat,$XX[0],4":"$XX[1]"`),$TX[1]#d
+#md5# add \$$K[$i],$a
+#md5# xor $d,$tmp
+#rc4# movz $TX[0]#b,$TX[0]#d
+#rc4# movl $TY#d,4*$k($XX[1])
+#md5# add $tmp,$a
+#rc4# add $TX[1]#b,$YY#b
+#md5# rol \$$rot0[$j%4],$a
+#md5# mov `$j==15?"$b":"$c"`,$tmp # forward reference
+#rc4# pinsrw \$`($j>>1)&7`,($dat,$TX[0],4),$xmm\n
+#md5# add $b,$a
+___
+ $code.=<<___ if ($rc4 && $j==15 && $k==$MOD-1);
+ mov $YY,$XX[1]
+ xor $YY,$YY # keyword to partial register
+ mov $XX[1]#b,$YY#b
+ lea ($dat,$XX[0],4),$XX[1]
+___
+ $code.=<<___ if ($rc4 && $j==15);
+ psllq \$8,%xmm1
+ pxor %xmm0,%xmm2
+ pxor %xmm1,%xmm2
+___
+}
+sub R1 {
+ my ($i,$a,$b,$c,$d)=@_;
+ my @rot1=(5,9,14,20);
+ my $j=$i%16;
+ my $k=$i%$MOD;
+ my $xmm="%xmm".($j&1);
+ $code.=" movdqu 16($in0),%xmm3\n" if ($rc4 && $j==15);
+ $code.=" add \$$MOD,$XX[0]#b\n" if ($rc4 && $j==15 && $k==$MOD-1);
+ $code.=" pxor $xmm,$xmm\n" if ($rc4 && $j<=1);
+ $code.=<<___;
+#rc4# movl ($dat,$YY,4),$TY#d
+#md5# xor $b,$tmp
+#rc4# movl $TX[0]#d,($dat,$YY,4)
+#md5# and $d,$tmp
+#md5# add 4*`((1+5*$j)%16)`($inp),$a
+#rc4# add $TY#b,$TX[0]#b
+#rc4# movl `4*(($k+1)%$MOD)`(`$k==$MOD-1?"$dat,$XX[0],4":"$XX[1]"`),$TX[1]#d
+#md5# add \$$K[$i],$a
+#md5# xor $c,$tmp
+#rc4# movz $TX[0]#b,$TX[0]#d
+#rc4# movl $TY#d,4*$k($XX[1])
+#md5# add $tmp,$a
+#rc4# add $TX[1]#b,$YY#b
+#md5# rol \$$rot1[$j%4],$a
+#md5# mov `$j==15?"$c":"$b"`,$tmp # forward reference
+#rc4# pinsrw \$`($j>>1)&7`,($dat,$TX[0],4),$xmm\n
+#md5# add $b,$a
+___
+ $code.=<<___ if ($rc4 && $j==15 && $k==$MOD-1);
+ mov $YY,$XX[1]
+ xor $YY,$YY # keyword to partial register
+ mov $XX[1]#b,$YY#b
+ lea ($dat,$XX[0],4),$XX[1]
+___
+ $code.=<<___ if ($rc4 && $j==15);
+ psllq \$8,%xmm1
+ pxor %xmm0,%xmm3
+ pxor %xmm1,%xmm3
+___
+}
+sub R2 {
+ my ($i,$a,$b,$c,$d)=@_;
+ my @rot2=(4,11,16,23);
+ my $j=$i%16;
+ my $k=$i%$MOD;
+ my $xmm="%xmm".($j&1);
+ $code.=" movdqu 32($in0),%xmm4\n" if ($rc4 && $j==15);
+ $code.=" add \$$MOD,$XX[0]#b\n" if ($rc4 && $j==15 && $k==$MOD-1);
+ $code.=" pxor $xmm,$xmm\n" if ($rc4 && $j<=1);
+ $code.=<<___;
+#rc4# movl ($dat,$YY,4),$TY#d
+#md5# xor $c,$tmp
+#rc4# movl $TX[0]#d,($dat,$YY,4)
+#md5# xor $b,$tmp
+#md5# add 4*`((5+3*$j)%16)`($inp),$a
+#rc4# add $TY#b,$TX[0]#b
+#rc4# movl `4*(($k+1)%$MOD)`(`$k==$MOD-1?"$dat,$XX[0],4":"$XX[1]"`),$TX[1]#d
+#md5# add \$$K[$i],$a
+#rc4# movz $TX[0]#b,$TX[0]#d
+#md5# add $tmp,$a
+#rc4# movl $TY#d,4*$k($XX[1])
+#rc4# add $TX[1]#b,$YY#b
+#md5# rol \$$rot2[$j%4],$a
+#md5# mov `$j==15?"\\\$-1":"$c"`,$tmp # forward reference
+#rc4# pinsrw \$`($j>>1)&7`,($dat,$TX[0],4),$xmm\n
+#md5# add $b,$a
+___
+ $code.=<<___ if ($rc4 && $j==15 && $k==$MOD-1);
+ mov $YY,$XX[1]
+ xor $YY,$YY # keyword to partial register
+ mov $XX[1]#b,$YY#b
+ lea ($dat,$XX[0],4),$XX[1]
+___
+ $code.=<<___ if ($rc4 && $j==15);
+ psllq \$8,%xmm1
+ pxor %xmm0,%xmm4
+ pxor %xmm1,%xmm4
+___
+}
+sub R3 {
+ my ($i,$a,$b,$c,$d)=@_;
+ my @rot3=(6,10,15,21);
+ my $j=$i%16;
+ my $k=$i%$MOD;
+ my $xmm="%xmm".($j&1);
+ $code.=" movdqu 48($in0),%xmm5\n" if ($rc4 && $j==15);
+ $code.=" add \$$MOD,$XX[0]#b\n" if ($rc4 && $j==15 && $k==$MOD-1);
+ $code.=" pxor $xmm,$xmm\n" if ($rc4 && $j<=1);
+ $code.=<<___;
+#rc4# movl ($dat,$YY,4),$TY#d
+#md5# xor $d,$tmp
+#rc4# movl $TX[0]#d,($dat,$YY,4)
+#md5# or $b,$tmp
+#md5# add 4*`((7*$j)%16)`($inp),$a
+#rc4# add $TY#b,$TX[0]#b
+#rc4# movl `4*(($k+1)%$MOD)`(`$k==$MOD-1?"$dat,$XX[0],4":"$XX[1]"`),$TX[1]#d
+#md5# add \$$K[$i],$a
+#rc4# movz $TX[0]#b,$TX[0]#d
+#md5# xor $c,$tmp
+#rc4# movl $TY#d,4*$k($XX[1])
+#md5# add $tmp,$a
+#rc4# add $TX[1]#b,$YY#b
+#md5# rol \$$rot3[$j%4],$a
+#md5# mov \$-1,$tmp # forward reference
+#rc4# pinsrw \$`($j>>1)&7`,($dat,$TX[0],4),$xmm\n
+#md5# add $b,$a
+___
+ $code.=<<___ if ($rc4 && $j==15);
+ mov $XX[0],$XX[1]
+ xor $XX[0],$XX[0] # keyword to partial register
+ mov $XX[1]#b,$XX[0]#b
+ mov $YY,$XX[1]
+ xor $YY,$YY # keyword to partial register
+ mov $XX[1]#b,$YY#b
+ lea ($dat,$XX[0],4),$XX[1]
+ psllq \$8,%xmm1
+ pxor %xmm0,%xmm5
+ pxor %xmm1,%xmm5
+___
+}
+
+my $i=0;
+for(;$i<16;$i++) { R0($i,@V); unshift(@V,pop(@V)); push(@TX,shift(@TX)); }
+for(;$i<32;$i++) { R1($i,@V); unshift(@V,pop(@V)); push(@TX,shift(@TX)); }
+for(;$i<48;$i++) { R2($i,@V); unshift(@V,pop(@V)); push(@TX,shift(@TX)); }
+for(;$i<64;$i++) { R3($i,@V); unshift(@V,pop(@V)); push(@TX,shift(@TX)); }
+
+$code.=<<___;
+#md5# add 0*4(%rsp),$V[0] # accumulate hash value
+#md5# add 1*4(%rsp),$V[1]
+#md5# add 2*4(%rsp),$V[2]
+#md5# add 3*4(%rsp),$V[3]
+
+#rc4# movdqu %xmm2,($out,$in0) # write RC4 output
+#rc4# movdqu %xmm3,16($out,$in0)
+#rc4# movdqu %xmm4,32($out,$in0)
+#rc4# movdqu %xmm5,48($out,$in0)
+#md5# lea 64($inp),$inp
+#rc4# lea 64($in0),$in0
+ cmp 16(%rsp),$inp # are we done?
+ jb .Loop
+
+#md5# mov 24(%rsp),$len # restore pointer to MD5_CTX
+#rc4# sub $TX[0]#b,$YY#b # correct $YY
+#md5# mov $V[0],0*4($len) # write MD5_CTX
+#md5# mov $V[1],1*4($len)
+#md5# mov $V[2],2*4($len)
+#md5# mov $V[3],3*4($len)
+___
+$code.=<<___ if ($rc4 && (!$md5 || $D));
+ mov 32(%rsp),$len # restore original $len
+ and \$63,$len # remaining bytes
+ jnz .Loop1
+ jmp .Ldone
+
+.align 16
+.Loop1:
+ add $TX[0]#b,$YY#b
+ movl ($dat,$YY,4),$TY#d
+ movl $TX[0]#d,($dat,$YY,4)
+ movl $TY#d,($dat,$XX[0],4)
+ add $TY#b,$TX[0]#b
+ inc $XX[0]#b
+ movl ($dat,$TX[0],4),$TY#d
+ movl ($dat,$XX[0],4),$TX[0]#d
+ xorb ($in0),$TY#b
+ movb $TY#b,($out,$in0)
+ lea 1($in0),$in0
+ dec $len
+ jnz .Loop1
+
+.Ldone:
+___
+$code.=<<___;
+#rc4# sub \$1,$XX[0]#b
+#rc4# movl $XX[0]#d,-8($dat)
+#rc4# movl $YY#d,-4($dat)
+
+ mov 40(%rsp),%r15
+ mov 48(%rsp),%r14
+ mov 56(%rsp),%r13
+ mov 64(%rsp),%r12
+ mov 72(%rsp),%rbp
+ mov 80(%rsp),%rbx
+ lea 88(%rsp),%rsp
+.Lepilogue:
+.Labort:
+ ret
+.size $func,.-$func
+___
+
+if ($rc4 && $D) { # sole purpose of this section is to provide
+ # option to use the generated module as drop-in
+ # replacement for rc4-x86_64.pl for debugging
+ # and testing purposes...
+my ($idx,$ido)=("%r8","%r9");
+my ($dat,$len,$inp)=("%rdi","%rsi","%rdx");
+
+$code.=<<___;
+.globl RC4_set_key
+.type RC4_set_key,\@function,3
+.align 16
+RC4_set_key:
+ lea 8($dat),$dat
+ lea ($inp,$len),$inp
+ neg $len
+ mov $len,%rcx
+ xor %eax,%eax
+ xor $ido,$ido
+ xor %r10,%r10
+ xor %r11,%r11
+ jmp .Lw1stloop
+
+.align 16
+.Lw1stloop:
+ mov %eax,($dat,%rax,4)
+ add \$1,%al
+ jnc .Lw1stloop
+
+ xor $ido,$ido
+ xor $idx,$idx
+.align 16
+.Lw2ndloop:
+ mov ($dat,$ido,4),%r10d
+ add ($inp,$len,1),$idx#b
+ add %r10b,$idx#b
+ add \$1,$len
+ mov ($dat,$idx,4),%r11d
+ cmovz %rcx,$len
+ mov %r10d,($dat,$idx,4)
+ mov %r11d,($dat,$ido,4)
+ add \$1,$ido#b
+ jnc .Lw2ndloop
+
+ xor %eax,%eax
+ mov %eax,-8($dat)
+ mov %eax,-4($dat)
+ ret
+.size RC4_set_key,.-RC4_set_key
+
+.globl RC4_options
+.type RC4_options,\@abi-omnipotent
+.align 16
+RC4_options:
+ lea .Lopts(%rip),%rax
+ ret
+.align 64
+.Lopts:
+.asciz "rc4(64x,int)"
+.align 64
+.size RC4_options,.-RC4_options
+___
+}
+# EXCEPTION_DISPOSITION handler (EXCEPTION_RECORD *rec,ULONG64 frame,
+# CONTEXT *context,DISPATCHER_CONTEXT *disp)
+if ($win64) {
+my $rec="%rcx";
+my $frame="%rdx";
+my $context="%r8";
+my $disp="%r9";
+
+$code.=<<___;
+.extern __imp_RtlVirtualUnwind
+.type se_handler,\@abi-omnipotent
+.align 16
+se_handler:
+ push %rsi
+ push %rdi
+ push %rbx
+ push %rbp
+ push %r12
+ push %r13
+ push %r14
+ push %r15
+ pushfq
+ sub \$64,%rsp
+
+ mov 120($context),%rax # pull context->Rax
+ mov 248($context),%rbx # pull context->Rip
+
+ lea .Lbody(%rip),%r10
+ cmp %r10,%rbx # context->Rip<.Lbody
+ jb .Lin_prologue
+
+ mov 152($context),%rax # pull context->Rsp
+
+ lea .Lepilogue(%rip),%r10
+ cmp %r10,%rbx # context->Rip>=.Lepilogue
+ jae .Lin_prologue
+
+ mov 40(%rax),%r15
+ mov 48(%rax),%r14
+ mov 56(%rax),%r13
+ mov 64(%rax),%r12
+ mov 72(%rax),%rbp
+ mov 80(%rax),%rbx
+ lea 88(%rax),%rax
+
+ mov %rbx,144($context) # restore context->Rbx
+ mov %rbp,160($context) # restore context->Rbp
+ mov %r12,216($context) # restore context->R12
+ mov %r13,224($context) # restore context->R12
+ mov %r14,232($context) # restore context->R14
+ mov %r15,240($context) # restore context->R15
+
+.Lin_prologue:
+ mov 8(%rax),%rdi
+ mov 16(%rax),%rsi
+ mov %rax,152($context) # restore context->Rsp
+ mov %rsi,168($context) # restore context->Rsi
+ mov %rdi,176($context) # restore context->Rdi
+
+ mov 40($disp),%rdi # disp->ContextRecord
+ mov $context,%rsi # context
+ mov \$154,%ecx # sizeof(CONTEXT)
+ .long 0xa548f3fc # cld; rep movsq
+
+ mov $disp,%rsi
+ xor %rcx,%rcx # arg1, UNW_FLAG_NHANDLER
+ mov 8(%rsi),%rdx # arg2, disp->ImageBase
+ mov 0(%rsi),%r8 # arg3, disp->ControlPc
+ mov 16(%rsi),%r9 # arg4, disp->FunctionEntry
+ mov 40(%rsi),%r10 # disp->ContextRecord
+ lea 56(%rsi),%r11 # &disp->HandlerData
+ lea 24(%rsi),%r12 # &disp->EstablisherFrame
+ mov %r10,32(%rsp) # arg5
+ mov %r11,40(%rsp) # arg6
+ mov %r12,48(%rsp) # arg7
+ mov %rcx,56(%rsp) # arg8, (NULL)
+ call *__imp_RtlVirtualUnwind(%rip)
+
+ mov \$1,%eax # ExceptionContinueSearch
+ add \$64,%rsp
+ popfq
+ pop %r15
+ pop %r14
+ pop %r13
+ pop %r12
+ pop %rbp
+ pop %rbx
+ pop %rdi
+ pop %rsi
+ ret
+.size se_handler,.-se_handler
+
+.section .pdata
+.align 4
+ .rva .LSEH_begin_$func
+ .rva .LSEH_end_$func
+ .rva .LSEH_info_$func
+
+.section .xdata
+.align 8
+.LSEH_info_$func:
+ .byte 9,0,0,0
+ .rva se_handler
+___
+}
+
+sub reg_part {
+my ($reg,$conv)=@_;
+ if ($reg =~ /%r[0-9]+/) { $reg .= $conv; }
+ elsif ($conv eq "b") { $reg =~ s/%[er]([^x]+)x?/%$1l/; }
+ elsif ($conv eq "w") { $reg =~ s/%[er](.+)/%$1/; }
+ elsif ($conv eq "d") { $reg =~ s/%[er](.+)/%e$1/; }
+ return $reg;
+}
+
+$code =~ s/(%[a-z0-9]+)#([bwd])/reg_part($1,$2)/gem;
+$code =~ s/\`([^\`]*)\`/eval $1/gem;
+$code =~ s/pinsrw\s+\$0,/movd /gm;
+
+$code =~ s/#md5#//gm if ($md5);
+$code =~ s/#rc4#//gm if ($rc4);
+
+print $code;
+
+close STDOUT;
diff --git a/openssl/crypto/rc4/asm/rc4-parisc.pl b/openssl/crypto/rc4/asm/rc4-parisc.pl
new file mode 100644
index 000000000..916506708
--- /dev/null
+++ b/openssl/crypto/rc4/asm/rc4-parisc.pl
@@ -0,0 +1,313 @@
+#!/usr/bin/env perl
+
+# ====================================================================
+# Written by Andy Polyakov <appro@fy.chalmers.se> for the OpenSSL
+# project. The module is, however, dual licensed under OpenSSL and
+# CRYPTOGAMS licenses depending on where you obtain it. For further
+# details see http://www.openssl.org/~appro/cryptogams/.
+# ====================================================================
+
+# RC4 for PA-RISC.
+
+# June 2009.
+#
+# Performance is 33% better than gcc 3.2 generated code on PA-7100LC.
+# For reference, [4x] unrolled loop is >40% faster than folded one.
+# It's possible to unroll loop 8 times on PA-RISC 2.0, but improvement
+# is believed to be not sufficient to justify the effort...
+#
+# Special thanks to polarhome.com for providing HP-UX account.
+
+$0 =~ m/(.*[\/\\])[^\/\\]+$/; $dir=$1;
+
+$flavour = shift;
+$output = shift;
+open STDOUT,">$output";
+
+if ($flavour =~ /64/) {
+ $LEVEL ="2.0W";
+ $SIZE_T =8;
+ $FRAME_MARKER =80;
+ $SAVED_RP =16;
+ $PUSH ="std";
+ $PUSHMA ="std,ma";
+ $POP ="ldd";
+ $POPMB ="ldd,mb";
+} else {
+ $LEVEL ="1.0";
+ $SIZE_T =4;
+ $FRAME_MARKER =48;
+ $SAVED_RP =20;
+ $PUSH ="stw";
+ $PUSHMA ="stwm";
+ $POP ="ldw";
+ $POPMB ="ldwm";
+}
+
+$FRAME=4*$SIZE_T+$FRAME_MARKER; # 4 saved regs + frame marker
+ # [+ argument transfer]
+$SZ=1; # defaults to RC4_CHAR
+if (open CONF,"<${dir}../../opensslconf.h") {
+ while(<CONF>) {
+ if (m/#\s*define\s+RC4_INT\s+(.*)/) {
+ $SZ = ($1=~/char$/) ? 1 : 4;
+ last;
+ }
+ }
+ close CONF;
+}
+
+if ($SZ==1) { # RC4_CHAR
+ $LD="ldb";
+ $LDX="ldbx";
+ $MKX="addl";
+ $ST="stb";
+} else { # RC4_INT (~5% faster than RC4_CHAR on PA-7100LC)
+ $LD="ldw";
+ $LDX="ldwx,s";
+ $MKX="sh2addl";
+ $ST="stw";
+}
+
+$key="%r26";
+$len="%r25";
+$inp="%r24";
+$out="%r23";
+
+@XX=("%r19","%r20");
+@TX=("%r21","%r22");
+$YY="%r28";
+$TY="%r29";
+
+$acc="%r1";
+$ix="%r2";
+$iy="%r3";
+$dat0="%r4";
+$dat1="%r5";
+$rem="%r6";
+$mask="%r31";
+
+sub unrolledloopbody {
+for ($i=0;$i<4;$i++) {
+$code.=<<___;
+ ldo 1($XX[0]),$XX[1]
+ `sprintf("$LDX %$TY(%$key),%$dat1") if ($i>0)`
+ and $mask,$XX[1],$XX[1]
+ $LDX $YY($key),$TY
+ $MKX $YY,$key,$ix
+ $LDX $XX[1]($key),$TX[1]
+ $MKX $XX[0],$key,$iy
+ $ST $TX[0],0($ix)
+ comclr,<> $XX[1],$YY,%r0 ; conditional
+ copy $TX[0],$TX[1] ; move
+ `sprintf("%sdep %$dat1,%d,8,%$acc",$i==1?"z":"",8*($i-1)+7) if ($i>0)`
+ $ST $TY,0($iy)
+ addl $TX[0],$TY,$TY
+ addl $TX[1],$YY,$YY
+ and $mask,$TY,$TY
+ and $mask,$YY,$YY
+___
+push(@TX,shift(@TX)); push(@XX,shift(@XX)); # "rotate" registers
+} }
+
+sub foldedloop {
+my ($label,$count)=@_;
+$code.=<<___;
+$label
+ $MKX $YY,$key,$iy
+ $LDX $YY($key),$TY
+ $MKX $XX[0],$key,$ix
+ $ST $TX[0],0($iy)
+ ldo 1($XX[0]),$XX[0]
+ $ST $TY,0($ix)
+ addl $TX[0],$TY,$TY
+ ldbx $inp($out),$dat1
+ and $mask,$TY,$TY
+ and $mask,$XX[0],$XX[0]
+ $LDX $TY($key),$acc
+ $LDX $XX[0]($key),$TX[0]
+ ldo 1($out),$out
+ xor $dat1,$acc,$acc
+ addl $TX[0],$YY,$YY
+ stb $acc,-1($out)
+ addib,<> -1,$count,$label ; $count is always small
+ and $mask,$YY,$YY
+___
+}
+
+$code=<<___;
+ .LEVEL $LEVEL
+ .SPACE \$TEXT\$
+ .SUBSPA \$CODE\$,QUAD=0,ALIGN=8,ACCESS=0x2C,CODE_ONLY
+
+ .EXPORT RC4,ENTRY,ARGW0=GR,ARGW1=GR,ARGW2=GR,ARGW3=GR
+RC4
+ .PROC
+ .CALLINFO FRAME=`$FRAME-4*$SIZE_T`,NO_CALLS,SAVE_RP,ENTRY_GR=6
+ .ENTRY
+ $PUSH %r2,-$SAVED_RP(%sp) ; standard prologue
+ $PUSHMA %r3,$FRAME(%sp)
+ $PUSH %r4,`-$FRAME+1*$SIZE_T`(%sp)
+ $PUSH %r5,`-$FRAME+2*$SIZE_T`(%sp)
+ $PUSH %r6,`-$FRAME+3*$SIZE_T`(%sp)
+
+ cmpib,*= 0,$len,L\$abort
+ sub $inp,$out,$inp ; distance between $inp and $out
+
+ $LD `0*$SZ`($key),$XX[0]
+ $LD `1*$SZ`($key),$YY
+ ldo `2*$SZ`($key),$key
+
+ ldi 0xff,$mask
+ ldi 3,$dat0
+
+ ldo 1($XX[0]),$XX[0] ; warm up loop
+ and $mask,$XX[0],$XX[0]
+ $LDX $XX[0]($key),$TX[0]
+ addl $TX[0],$YY,$YY
+ cmpib,*>>= 6,$len,L\$oop1 ; is $len large enough to bother?
+ and $mask,$YY,$YY
+
+ and,<> $out,$dat0,$rem ; is $out aligned?
+ b L\$alignedout
+ subi 4,$rem,$rem
+ sub $len,$rem,$len
+___
+&foldedloop("L\$alignout",$rem); # process till $out is aligned
+
+$code.=<<___;
+L\$alignedout ; $len is at least 4 here
+ and,<> $inp,$dat0,$acc ; is $inp aligned?
+ b L\$oop4
+ sub $inp,$acc,$rem ; align $inp
+
+ sh3addl $acc,%r0,$acc
+ subi 32,$acc,$acc
+ mtctl $acc,%cr11 ; load %sar with vshd align factor
+ ldwx $rem($out),$dat0
+ ldo 4($rem),$rem
+L\$oop4misalignedinp
+___
+&unrolledloopbody();
+$code.=<<___;
+ $LDX $TY($key),$ix
+ ldwx $rem($out),$dat1
+ ldo -4($len),$len
+ or $ix,$acc,$acc ; last piece, no need to dep
+ vshd $dat0,$dat1,$iy ; align data
+ copy $dat1,$dat0
+ xor $iy,$acc,$acc
+ stw $acc,0($out)
+ cmpib,*<< 3,$len,L\$oop4misalignedinp
+ ldo 4($out),$out
+ cmpib,*= 0,$len,L\$done
+ nop
+ b L\$oop1
+ nop
+
+ .ALIGN 8
+L\$oop4
+___
+&unrolledloopbody();
+$code.=<<___;
+ $LDX $TY($key),$ix
+ ldwx $inp($out),$dat0
+ ldo -4($len),$len
+ or $ix,$acc,$acc ; last piece, no need to dep
+ xor $dat0,$acc,$acc
+ stw $acc,0($out)
+ cmpib,*<< 3,$len,L\$oop4
+ ldo 4($out),$out
+ cmpib,*= 0,$len,L\$done
+ nop
+___
+&foldedloop("L\$oop1",$len);
+$code.=<<___;
+L\$done
+ $POP `-$FRAME-$SAVED_RP`(%sp),%r2
+ ldo -1($XX[0]),$XX[0] ; chill out loop
+ sub $YY,$TX[0],$YY
+ and $mask,$XX[0],$XX[0]
+ and $mask,$YY,$YY
+ $ST $XX[0],`-2*$SZ`($key)
+ $ST $YY,`-1*$SZ`($key)
+ $POP `-$FRAME+1*$SIZE_T`(%sp),%r4
+ $POP `-$FRAME+2*$SIZE_T`(%sp),%r5
+ $POP `-$FRAME+3*$SIZE_T`(%sp),%r6
+L\$abort
+ bv (%r2)
+ .EXIT
+ $POPMB -$FRAME(%sp),%r3
+ .PROCEND
+___
+
+$code.=<<___;
+
+ .EXPORT private_RC4_set_key,ENTRY,ARGW0=GR,ARGW1=GR,ARGW2=GR
+ .ALIGN 8
+private_RC4_set_key
+ .PROC
+ .CALLINFO NO_CALLS
+ .ENTRY
+ $ST %r0,`0*$SZ`($key)
+ $ST %r0,`1*$SZ`($key)
+ ldo `2*$SZ`($key),$key
+ copy %r0,@XX[0]
+L\$1st
+ $ST @XX[0],0($key)
+ ldo 1(@XX[0]),@XX[0]
+ bb,>= @XX[0],`31-8`,L\$1st ; @XX[0]<256
+ ldo $SZ($key),$key
+
+ ldo `-256*$SZ`($key),$key ; rewind $key
+ addl $len,$inp,$inp ; $inp to point at the end
+ sub %r0,$len,%r23 ; inverse index
+ copy %r0,@XX[0]
+ copy %r0,@XX[1]
+ ldi 0xff,$mask
+
+L\$2nd
+ $LDX @XX[0]($key),@TX[0]
+ ldbx %r23($inp),@TX[1]
+ addi,nuv 1,%r23,%r23 ; increment and conditional
+ sub %r0,$len,%r23 ; inverse index
+ addl @TX[0],@XX[1],@XX[1]
+ addl @TX[1],@XX[1],@XX[1]
+ and $mask,@XX[1],@XX[1]
+ $MKX @XX[0],$key,$TY
+ $LDX @XX[1]($key),@TX[1]
+ $MKX @XX[1],$key,$YY
+ ldo 1(@XX[0]),@XX[0]
+ $ST @TX[0],0($YY)
+ bb,>= @XX[0],`31-8`,L\$2nd ; @XX[0]<256
+ $ST @TX[1],0($TY)
+
+ bv,n (%r2)
+ .EXIT
+ nop
+ .PROCEND
+
+ .EXPORT RC4_options,ENTRY
+ .ALIGN 8
+RC4_options
+ .PROC
+ .CALLINFO NO_CALLS
+ .ENTRY
+ blr %r0,%r28
+ ldi 3,%r1
+L\$pic
+ andcm %r28,%r1,%r28
+ bv (%r2)
+ .EXIT
+ ldo L\$opts-L\$pic(%r28),%r28
+ .PROCEND
+ .ALIGN 8
+L\$opts
+ .STRINGZ "rc4(4x,`$SZ==1?"char":"int"`)"
+ .STRINGZ "RC4 for PA-RISC, CRYPTOGAMS by <appro\@openssl.org>"
+___
+$code =~ s/\`([^\`]*)\`/eval $1/gem;
+$code =~ s/cmpib,\*/comib,/gm if ($SIZE_T==4);
+
+print $code;
+close STDOUT;
diff --git a/openssl/crypto/rc4/asm/rc4-s390x.pl b/openssl/crypto/rc4/asm/rc4-s390x.pl
index 96681fa05..1aa754820 100644
--- a/openssl/crypto/rc4/asm/rc4-s390x.pl
+++ b/openssl/crypto/rc4/asm/rc4-s390x.pl
@@ -13,6 +13,29 @@
# "cluster" Address Generation Interlocks, so that one pipeline stall
# resolves several dependencies.
+# November 2010.
+#
+# Adapt for -m31 build. If kernel supports what's called "highgprs"
+# feature on Linux [see /proc/cpuinfo], it's possible to use 64-bit
+# instructions and achieve "64-bit" performance even in 31-bit legacy
+# application context. The feature is not specific to any particular
+# processor, as long as it's "z-CPU". Latter implies that the code
+# remains z/Architecture specific. On z990 it was measured to perform
+# 50% better than code generated by gcc 4.3.
+
+$flavour = shift;
+
+if ($flavour =~ /3[12]/) {
+ $SIZE_T=4;
+ $g="";
+} else {
+ $SIZE_T=8;
+ $g="g";
+}
+
+while (($output=shift) && ($output!~/^\w[\w\-]*\.\w+$/)) {}
+open STDOUT,">$output";
+
$rp="%r14";
$sp="%r15";
$code=<<___;
@@ -39,7 +62,12 @@ $code.=<<___;
.type RC4,\@function
.align 64
RC4:
- stmg %r6,%r11,48($sp)
+ stm${g} %r6,%r11,6*$SIZE_T($sp)
+___
+$code.=<<___ if ($flavour =~ /3[12]/);
+ llgfr $len,$len
+___
+$code.=<<___;
llgc $XX[0],0($key)
llgc $YY,1($key)
la $XX[0],1($XX[0])
@@ -90,7 +118,7 @@ $code.=<<___;
xgr $acc,$TX[1]
stg $acc,0($out)
la $out,8($out)
- brct $cnt,.Loop8
+ brctg $cnt,.Loop8
.Lshort:
lghi $acc,7
@@ -122,7 +150,7 @@ $code.=<<___;
ahi $XX[0],-1
stc $XX[0],0($key)
stc $YY,1($key)
- lmg %r6,%r11,48($sp)
+ lm${g} %r6,%r11,6*$SIZE_T($sp)
br $rp
.size RC4,.-RC4
.string "RC4 for s390x, CRYPTOGAMS by <appro\@openssl.org>"
@@ -147,7 +175,7 @@ $code.=<<___;
.type RC4_set_key,\@function
.align 64
RC4_set_key:
- stmg %r6,%r8,48($sp)
+ stm${g} %r6,%r8,6*$SIZE_T($sp)
lhi $cnt,256
la $idx,0(%r0)
sth $idx,0($key)
@@ -180,7 +208,7 @@ RC4_set_key:
la $iinp,0(%r0)
j .L2ndloop
.Ldone:
- lmg %r6,%r8,48($sp)
+ lm${g} %r6,%r8,6*$SIZE_T($sp)
br $rp
.size RC4_set_key,.-RC4_set_key
@@ -203,3 +231,4 @@ RC4_options:
___
print $code;
+close STDOUT; # force flush
diff --git a/openssl/crypto/rc4/asm/rc4-x86_64.pl b/openssl/crypto/rc4/asm/rc4-x86_64.pl
index 677be5fe2..d6eac205e 100644
--- a/openssl/crypto/rc4/asm/rc4-x86_64.pl
+++ b/openssl/crypto/rc4/asm/rc4-x86_64.pl
@@ -7,6 +7,8 @@
# details see http://www.openssl.org/~appro/cryptogams/.
# ====================================================================
#
+# July 2004
+#
# 2.22x RC4 tune-up:-) It should be noted though that my hand [as in
# "hand-coded assembler"] doesn't stand for the whole improvement
# coefficient. It turned out that eliminating RC4_CHAR from config
@@ -19,6 +21,8 @@
# to operate on partial registers, it turned out to be the best bet.
# At least for AMD... How IA32E would perform remains to be seen...
+# November 2004
+#
# As was shown by Marc Bevand reordering of couple of load operations
# results in even higher performance gain of 3.3x:-) At least on
# Opteron... For reference, 1x in this case is RC4_CHAR C-code
@@ -26,6 +30,8 @@
# Latter means that if you want to *estimate* what to expect from
# *your* Opteron, then multiply 54 by 3.3 and clock frequency in GHz.
+# November 2004
+#
# Intel P4 EM64T core was found to run the AMD64 code really slow...
# The only way to achieve comparable performance on P4 was to keep
# RC4_CHAR. Kind of ironic, huh? As it's apparently impossible to
@@ -33,10 +39,14 @@
# on either AMD and Intel platforms, I implement both cases. See
# rc4_skey.c for further details...
+# April 2005
+#
# P4 EM64T core appears to be "allergic" to 64-bit inc/dec. Replacing
# those with add/sub results in 50% performance improvement of folded
# loop...
+# May 2005
+#
# As was shown by Zou Nanhai loop unrolling can improve Intel EM64T
# performance by >30% [unlike P4 32-bit case that is]. But this is
# provided that loads are reordered even more aggressively! Both code
@@ -50,6 +60,8 @@
# is not implemented, then this final RC4_CHAR code-path should be
# preferred, as it provides better *all-round* performance].
+# March 2007
+#
# Intel Core2 was observed to perform poorly on both code paths:-( It
# apparently suffers from some kind of partial register stall, which
# occurs in 64-bit mode only [as virtually identical 32-bit loop was
@@ -58,6 +70,37 @@
# fit for Core2 and therefore the code was modified to skip cloop8 on
# this CPU.
+# May 2010
+#
+# Intel Westmere was observed to perform suboptimally. Adding yet
+# another movzb to cloop1 improved performance by almost 50%! Core2
+# performance is improved too, but nominally...
+
+# May 2011
+#
+# The only code path that was not modified is P4-specific one. Non-P4
+# Intel code path optimization is heavily based on submission by Maxim
+# Perminov, Maxim Locktyukhin and Jim Guilford of Intel. I've used
+# some of the ideas even in attempt to optmize the original RC4_INT
+# code path... Current performance in cycles per processed byte (less
+# is better) and improvement coefficients relative to previous
+# version of this module are:
+#
+# Opteron 5.3/+0%(*)
+# P4 6.5
+# Core2 6.2/+15%(**)
+# Westmere 4.2/+60%
+# Sandy Bridge 4.2/+120%
+# Atom 9.3/+80%
+#
+# (*) But corresponding loop has less instructions, which should have
+# positive effect on upcoming Bulldozer, which has one less ALU.
+# For reference, Intel code runs at 6.8 cpb rate on Opteron.
+# (**) Note that Core2 result is ~15% lower than corresponding result
+# for 32-bit code, meaning that it's possible to improve it,
+# but more than likely at the cost of the others (see rc4-586.pl
+# to get the idea)...
+
$flavour = shift;
$output = shift;
if ($flavour =~ /\./) { $output = $flavour; undef $flavour; }
@@ -76,13 +119,10 @@ $len="%rsi"; # arg2
$inp="%rdx"; # arg3
$out="%rcx"; # arg4
-@XX=("%r8","%r10");
-@TX=("%r9","%r11");
-$YY="%r12";
-$TY="%r13";
-
+{
$code=<<___;
.text
+.extern OPENSSL_ia32cap_P
.globl RC4
.type RC4,\@function,4
@@ -95,48 +135,173 @@ RC4: or $len,$len
push %r12
push %r13
.Lprologue:
+ mov $len,%r11
+ mov $inp,%r12
+ mov $out,%r13
+___
+my $len="%r11"; # reassign input arguments
+my $inp="%r12";
+my $out="%r13";
- add \$8,$dat
- movl -8($dat),$XX[0]#d
- movl -4($dat),$YY#d
+my @XX=("%r10","%rsi");
+my @TX=("%rax","%rbx");
+my $YY="%rcx";
+my $TY="%rdx";
+
+$code.=<<___;
+ xor $XX[0],$XX[0]
+ xor $YY,$YY
+
+ lea 8($dat),$dat
+ mov -8($dat),$XX[0]#b
+ mov -4($dat),$YY#b
cmpl \$-1,256($dat)
je .LRC4_CHAR
+ mov OPENSSL_ia32cap_P(%rip),%r8d
+ xor $TX[1],$TX[1]
inc $XX[0]#b
+ sub $XX[0],$TX[1]
+ sub $inp,$out
movl ($dat,$XX[0],4),$TX[0]#d
- test \$-8,$len
+ test \$-16,$len
jz .Lloop1
- jmp .Lloop8
+ bt \$30,%r8d # Intel CPU?
+ jc .Lintel
+ and \$7,$TX[1]
+ lea 1($XX[0]),$XX[1]
+ jz .Loop8
+ sub $TX[1],$len
+.Loop8_warmup:
+ add $TX[0]#b,$YY#b
+ movl ($dat,$YY,4),$TY#d
+ movl $TX[0]#d,($dat,$YY,4)
+ movl $TY#d,($dat,$XX[0],4)
+ add $TY#b,$TX[0]#b
+ inc $XX[0]#b
+ movl ($dat,$TX[0],4),$TY#d
+ movl ($dat,$XX[0],4),$TX[0]#d
+ xorb ($inp),$TY#b
+ movb $TY#b,($out,$inp)
+ lea 1($inp),$inp
+ dec $TX[1]
+ jnz .Loop8_warmup
+
+ lea 1($XX[0]),$XX[1]
+ jmp .Loop8
.align 16
-.Lloop8:
+.Loop8:
___
for ($i=0;$i<8;$i++) {
+$code.=<<___ if ($i==7);
+ add \$8,$XX[1]#b
+___
$code.=<<___;
add $TX[0]#b,$YY#b
- mov $XX[0],$XX[1]
movl ($dat,$YY,4),$TY#d
- ror \$8,%rax # ror is redundant when $i=0
- inc $XX[1]#b
- movl ($dat,$XX[1],4),$TX[1]#d
- cmp $XX[1],$YY
movl $TX[0]#d,($dat,$YY,4)
- cmove $TX[0],$TX[1]
- movl $TY#d,($dat,$XX[0],4)
+ movl `4*($i==7?-1:$i)`($dat,$XX[1],4),$TX[1]#d
+ ror \$8,%r8 # ror is redundant when $i=0
+ movl $TY#d,4*$i($dat,$XX[0],4)
add $TX[0]#b,$TY#b
- movb ($dat,$TY,4),%al
+ movb ($dat,$TY,4),%r8b
___
-push(@TX,shift(@TX)); push(@XX,shift(@XX)); # "rotate" registers
+push(@TX,shift(@TX)); #push(@XX,shift(@XX)); # "rotate" registers
}
$code.=<<___;
- ror \$8,%rax
+ add \$8,$XX[0]#b
+ ror \$8,%r8
sub \$8,$len
- xor ($inp),%rax
- add \$8,$inp
- mov %rax,($out)
- add \$8,$out
+ xor ($inp),%r8
+ mov %r8,($out,$inp)
+ lea 8($inp),$inp
test \$-8,$len
- jnz .Lloop8
+ jnz .Loop8
+ cmp \$0,$len
+ jne .Lloop1
+ jmp .Lexit
+
+.align 16
+.Lintel:
+ test \$-32,$len
+ jz .Lloop1
+ and \$15,$TX[1]
+ jz .Loop16_is_hot
+ sub $TX[1],$len
+.Loop16_warmup:
+ add $TX[0]#b,$YY#b
+ movl ($dat,$YY,4),$TY#d
+ movl $TX[0]#d,($dat,$YY,4)
+ movl $TY#d,($dat,$XX[0],4)
+ add $TY#b,$TX[0]#b
+ inc $XX[0]#b
+ movl ($dat,$TX[0],4),$TY#d
+ movl ($dat,$XX[0],4),$TX[0]#d
+ xorb ($inp),$TY#b
+ movb $TY#b,($out,$inp)
+ lea 1($inp),$inp
+ dec $TX[1]
+ jnz .Loop16_warmup
+
+ mov $YY,$TX[1]
+ xor $YY,$YY
+ mov $TX[1]#b,$YY#b
+
+.Loop16_is_hot:
+ lea ($dat,$XX[0],4),$XX[1]
+___
+sub RC4_loop {
+ my $i=shift;
+ my $j=$i<0?0:$i;
+ my $xmm="%xmm".($j&1);
+
+ $code.=" add \$16,$XX[0]#b\n" if ($i==15);
+ $code.=" movdqu ($inp),%xmm2\n" if ($i==15);
+ $code.=" add $TX[0]#b,$YY#b\n" if ($i<=0);
+ $code.=" movl ($dat,$YY,4),$TY#d\n";
+ $code.=" pxor %xmm0,%xmm2\n" if ($i==0);
+ $code.=" psllq \$8,%xmm1\n" if ($i==0);
+ $code.=" pxor $xmm,$xmm\n" if ($i<=1);
+ $code.=" movl $TX[0]#d,($dat,$YY,4)\n";
+ $code.=" add $TY#b,$TX[0]#b\n";
+ $code.=" movl `4*($j+1)`($XX[1]),$TX[1]#d\n" if ($i<15);
+ $code.=" movz $TX[0]#b,$TX[0]#d\n";
+ $code.=" movl $TY#d,4*$j($XX[1])\n";
+ $code.=" pxor %xmm1,%xmm2\n" if ($i==0);
+ $code.=" lea ($dat,$XX[0],4),$XX[1]\n" if ($i==15);
+ $code.=" add $TX[1]#b,$YY#b\n" if ($i<15);
+ $code.=" pinsrw \$`($j>>1)&7`,($dat,$TX[0],4),$xmm\n";
+ $code.=" movdqu %xmm2,($out,$inp)\n" if ($i==0);
+ $code.=" lea 16($inp),$inp\n" if ($i==0);
+ $code.=" movl ($XX[1]),$TX[1]#d\n" if ($i==15);
+}
+ RC4_loop(-1);
+$code.=<<___;
+ jmp .Loop16_enter
+.align 16
+.Loop16:
+___
+
+for ($i=0;$i<16;$i++) {
+ $code.=".Loop16_enter:\n" if ($i==1);
+ RC4_loop($i);
+ push(@TX,shift(@TX)); # "rotate" registers
+}
+$code.=<<___;
+ mov $YY,$TX[1]
+ xor $YY,$YY # keyword to partial register
+ sub \$16,$len
+ mov $TX[1]#b,$YY#b
+ test \$-16,$len
+ jnz .Loop16
+
+ psllq \$8,%xmm1
+ pxor %xmm0,%xmm2
+ pxor %xmm1,%xmm2
+ movdqu %xmm2,($out,$inp)
+ lea 16($inp),$inp
+
cmp \$0,$len
jne .Lloop1
jmp .Lexit
@@ -152,9 +317,8 @@ $code.=<<___;
movl ($dat,$TX[0],4),$TY#d
movl ($dat,$XX[0],4),$TX[0]#d
xorb ($inp),$TY#b
- inc $inp
- movb $TY#b,($out)
- inc $out
+ movb $TY#b,($out,$inp)
+ lea 1($inp),$inp
dec $len
jnz .Lloop1
jmp .Lexit
@@ -165,13 +329,11 @@ $code.=<<___;
movzb ($dat,$XX[0]),$TX[0]#d
test \$-8,$len
jz .Lcloop1
- cmpl \$0,260($dat)
- jnz .Lcloop1
jmp .Lcloop8
.align 16
.Lcloop8:
- mov ($inp),%eax
- mov 4($inp),%ebx
+ mov ($inp),%r8d
+ mov 4($inp),%r9d
___
# unroll 2x4-wise, because 64-bit rotates kill Intel P4...
for ($i=0;$i<4;$i++) {
@@ -188,8 +350,8 @@ $code.=<<___;
mov $TX[0],$TX[1]
.Lcmov$i:
add $TX[0]#b,$TY#b
- xor ($dat,$TY),%al
- ror \$8,%eax
+ xor ($dat,$TY),%r8b
+ ror \$8,%r8d
___
push(@TX,shift(@TX)); push(@XX,shift(@XX)); # "rotate" registers
}
@@ -207,16 +369,16 @@ $code.=<<___;
mov $TX[0],$TX[1]
.Lcmov$i:
add $TX[0]#b,$TY#b
- xor ($dat,$TY),%bl
- ror \$8,%ebx
+ xor ($dat,$TY),%r9b
+ ror \$8,%r9d
___
push(@TX,shift(@TX)); push(@XX,shift(@XX)); # "rotate" registers
}
$code.=<<___;
lea -8($len),$len
- mov %eax,($out)
+ mov %r8d,($out)
lea 8($inp),$inp
- mov %ebx,4($out)
+ mov %r9d,4($out)
lea 8($out),$out
test \$-8,$len
@@ -229,6 +391,7 @@ $code.=<<___;
.align 16
.Lcloop1:
add $TX[0]#b,$YY#b
+ movzb $YY#b,$YY#d
movzb ($dat,$YY),$TY#d
movb $TX[0]#b,($dat,$YY)
movb $TY#b,($dat,$XX[0])
@@ -260,16 +423,16 @@ $code.=<<___;
ret
.size RC4,.-RC4
___
+}
$idx="%r8";
$ido="%r9";
$code.=<<___;
-.extern OPENSSL_ia32cap_P
-.globl RC4_set_key
-.type RC4_set_key,\@function,3
+.globl private_RC4_set_key
+.type private_RC4_set_key,\@function,3
.align 16
-RC4_set_key:
+private_RC4_set_key:
lea 8($dat),$dat
lea ($inp,$len),$inp
neg $len
@@ -280,12 +443,9 @@ RC4_set_key:
xor %r11,%r11
mov OPENSSL_ia32cap_P(%rip),$idx#d
- bt \$20,$idx#d
- jnc .Lw1stloop
- bt \$30,$idx#d
- setc $ido#b
- mov $ido#d,260($dat)
- jmp .Lc1stloop
+ bt \$20,$idx#d # RC4_CHAR?
+ jc .Lc1stloop
+ jmp .Lw1stloop
.align 16
.Lw1stloop:
@@ -339,7 +499,7 @@ RC4_set_key:
mov %eax,-8($dat)
mov %eax,-4($dat)
ret
-.size RC4_set_key,.-RC4_set_key
+.size private_RC4_set_key,.-private_RC4_set_key
.globl RC4_options
.type RC4_options,\@abi-omnipotent
@@ -348,18 +508,20 @@ RC4_options:
lea .Lopts(%rip),%rax
mov OPENSSL_ia32cap_P(%rip),%edx
bt \$20,%edx
- jnc .Ldone
- add \$12,%rax
+ jc .L8xchar
bt \$30,%edx
jnc .Ldone
- add \$13,%rax
+ add \$25,%rax
+ ret
+.L8xchar:
+ add \$12,%rax
.Ldone:
ret
.align 64
.Lopts:
.asciz "rc4(8x,int)"
.asciz "rc4(8x,char)"
-.asciz "rc4(1x,char)"
+.asciz "rc4(16x,int)"
.asciz "RC4 for x86_64, CRYPTOGAMS by <appro\@openssl.org>"
.align 64
.size RC4_options,.-RC4_options
@@ -482,22 +644,32 @@ key_se_handler:
.rva .LSEH_end_RC4
.rva .LSEH_info_RC4
- .rva .LSEH_begin_RC4_set_key
- .rva .LSEH_end_RC4_set_key
- .rva .LSEH_info_RC4_set_key
+ .rva .LSEH_begin_private_RC4_set_key
+ .rva .LSEH_end_private_RC4_set_key
+ .rva .LSEH_info_private_RC4_set_key
.section .xdata
.align 8
.LSEH_info_RC4:
.byte 9,0,0,0
.rva stream_se_handler
-.LSEH_info_RC4_set_key:
+.LSEH_info_private_RC4_set_key:
.byte 9,0,0,0
.rva key_se_handler
___
}
-$code =~ s/#([bwd])/$1/gm;
+sub reg_part {
+my ($reg,$conv)=@_;
+ if ($reg =~ /%r[0-9]+/) { $reg .= $conv; }
+ elsif ($conv eq "b") { $reg =~ s/%[er]([^x]+)x?/%$1l/; }
+ elsif ($conv eq "w") { $reg =~ s/%[er](.+)/%$1/; }
+ elsif ($conv eq "d") { $reg =~ s/%[er](.+)/%e$1/; }
+ return $reg;
+}
+
+$code =~ s/(%[a-z0-9]+)#([bwd])/reg_part($1,$2)/gem;
+$code =~ s/\`([^\`]*)\`/eval $1/gem;
print $code;
diff --git a/openssl/crypto/rc4/rc4.h b/openssl/crypto/rc4/rc4.h
index 29d1acccf..88ceb46bc 100644
--- a/openssl/crypto/rc4/rc4.h
+++ b/openssl/crypto/rc4/rc4.h
@@ -79,6 +79,7 @@ typedef struct rc4_key_st
const char *RC4_options(void);
void RC4_set_key(RC4_KEY *key, int len, const unsigned char *data);
+void private_RC4_set_key(RC4_KEY *key, int len, const unsigned char *data);
void RC4(RC4_KEY *key, size_t len, const unsigned char *indata,
unsigned char *outdata);
diff --git a/openssl/crypto/rc4/rc4_skey.c b/openssl/crypto/rc4/rc4_skey.c
index b22c40b0b..fda27636e 100644
--- a/openssl/crypto/rc4/rc4_skey.c
+++ b/openssl/crypto/rc4/rc4_skey.c
@@ -85,7 +85,7 @@ const char *RC4_options(void)
* Date: Wed, 14 Sep 1994 06:35:31 GMT
*/
-void RC4_set_key(RC4_KEY *key, int len, const unsigned char *data)
+void private_RC4_set_key(RC4_KEY *key, int len, const unsigned char *data)
{
register RC4_INT tmp;
register int id1,id2;
@@ -104,40 +104,6 @@ void RC4_set_key(RC4_KEY *key, int len, const unsigned char *data)
d[(n)]=d[id2]; \
d[id2]=tmp; }
-#if defined(OPENSSL_CPUID_OBJ) && !defined(OPENSSL_NO_ASM)
-# if defined(__i386) || defined(__i386__) || defined(_M_IX86) || \
- defined(__INTEL__) || \
- defined(__x86_64) || defined(__x86_64__) || defined(_M_AMD64)
- if (sizeof(RC4_INT) > 1) {
- /*
- * Unlike all other x86 [and x86_64] implementations,
- * Intel P4 core [including EM64T] was found to perform
- * poorly with wider RC4_INT. Performance improvement
- * for IA-32 hand-coded assembler turned out to be 2.8x
- * if re-coded for RC4_CHAR! It's however inappropriate
- * to just switch to RC4_CHAR for x86[_64], as non-P4
- * implementations suffer from significant performance
- * losses then, e.g. PIII exhibits >2x deterioration,
- * and so does Opteron. In order to assure optimal
- * all-round performance, let us [try to] detect P4 at
- * run-time by checking upon HTT bit in CPU capability
- * vector and set up compressed key schedule, which is
- * recognized by correspondingly updated assembler
- * module...
- * <appro@fy.chalmers.se>
- */
- if (OPENSSL_ia32cap_P & (1<<28)) {
- unsigned char *cp=(unsigned char *)d;
-
- for (i=0;i<256;i++) cp[i]=i;
- for (i=0;i<256;i++) SK_LOOP(cp,i);
- /* mark schedule as compressed! */
- d[256/sizeof(RC4_INT)]=-1;
- return;
- }
- }
-# endif
-#endif
for (i=0; i < 256; i++) d[i]=i;
for (i=0; i < 256; i+=4)
{
diff --git a/openssl/crypto/rc4/rc4_utl.c b/openssl/crypto/rc4/rc4_utl.c
new file mode 100644
index 000000000..ab3f02fe6
--- /dev/null
+++ b/openssl/crypto/rc4/rc4_utl.c
@@ -0,0 +1,62 @@
+/* crypto/rc4/rc4_utl.c -*- mode:C; c-file-style: "eay" -*- */
+/* ====================================================================
+ * Copyright (c) 2011 The OpenSSL Project. All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ *
+ * 3. All advertising materials mentioning features or use of this
+ * software must display the following acknowledgment:
+ * "This product includes software developed by the OpenSSL Project
+ * for use in the OpenSSL Toolkit. (http://www.openssl.org/)"
+ *
+ * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to
+ * endorse or promote products derived from this software without
+ * prior written permission. For written permission, please contact
+ * openssl-core@openssl.org.
+ *
+ * 5. Products derived from this software may not be called "OpenSSL"
+ * nor may "OpenSSL" appear in their names without prior written
+ * permission of the OpenSSL Project.
+ *
+ * 6. Redistributions of any form whatsoever must retain the following
+ * acknowledgment:
+ * "This product includes software developed by the OpenSSL Project
+ * for use in the OpenSSL Toolkit (http://www.openssl.org/)"
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY
+ * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
+ * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE OpenSSL PROJECT OR
+ * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
+ * OF THE POSSIBILITY OF SUCH DAMAGE.
+ * ====================================================================
+ *
+ */
+
+#include <openssl/opensslv.h>
+#include <openssl/crypto.h>
+#include <openssl/rc4.h>
+
+void RC4_set_key(RC4_KEY *key, int len, const unsigned char *data)
+ {
+#ifdef OPENSSL_FIPS
+ fips_cipher_abort(RC4);
+#endif
+ private_RC4_set_key(key, len, data);
+ }
diff --git a/openssl/crypto/rc4/rc4test.c b/openssl/crypto/rc4/rc4test.c
index 633a79e75..4312605cc 100644
--- a/openssl/crypto/rc4/rc4test.c
+++ b/openssl/crypto/rc4/rc4test.c
@@ -120,6 +120,12 @@ int main(int argc, char *argv[])
RC4_KEY key;
unsigned char obuf[512];
+#if !defined(OPENSSL_PIC)
+ void OPENSSL_cpuid_setup(void);
+
+ OPENSSL_cpuid_setup();
+#endif
+
for (i=0; i<6; i++)
{
RC4_set_key(&key,keys[i][0],&(keys[i][1]));
generated by cgit v1.2.3 (git 2.25.1) at 2024-07-01 09:06:54 +0000