aboutsummaryrefslogtreecommitdiff
path: root/openssl/crypto/sha/asm/sha256-armv4.pl
diff options
context:
space:
mode:
Diffstat (limited to 'openssl/crypto/sha/asm/sha256-armv4.pl')
-rw-r--r--openssl/crypto/sha/asm/sha256-armv4.pl590
1 files changed, 520 insertions, 70 deletions
diff --git a/openssl/crypto/sha/asm/sha256-armv4.pl b/openssl/crypto/sha/asm/sha256-armv4.pl
index 9c84e8d93..f14c9c3cb 100644
--- a/openssl/crypto/sha/asm/sha256-armv4.pl
+++ b/openssl/crypto/sha/asm/sha256-armv4.pl
@@ -1,7 +1,7 @@
#!/usr/bin/env perl
# ====================================================================
-# Written by Andy Polyakov <appro@fy.chalmers.se> for the OpenSSL
+# Written by Andy Polyakov <appro@openssl.org> for the OpenSSL
# project. The module is, however, dual licensed under OpenSSL and
# CRYPTOGAMS licenses depending on where you obtain it. For further
# details see http://www.openssl.org/~appro/cryptogams/.
@@ -21,15 +21,27 @@
# February 2011.
#
# Profiler-assisted and platform-specific optimization resulted in 16%
-# improvement on Cortex A8 core and ~17 cycles per processed byte.
+# improvement on Cortex A8 core and ~15.4 cycles per processed byte.
+
+# September 2013.
+#
+# Add NEON implementation. On Cortex A8 it was measured to process one
+# byte in 12.5 cycles or 23% faster than integer-only code. Snapdragon
+# S4 does it in 12.5 cycles too, but it's 50% faster than integer-only
+# code (meaning that latter performs sub-optimally, nothing was done
+# about it).
+
+# May 2014.
+#
+# Add ARMv8 code path performing at 2.0 cpb on Apple A7.
while (($output=shift) && ($output!~/^\w[\w\-]*\.\w+$/)) {}
open STDOUT,">$output";
$ctx="r0"; $t0="r0";
-$inp="r1"; $t3="r1";
+$inp="r1"; $t4="r1";
$len="r2"; $t1="r2";
-$T1="r3";
+$T1="r3"; $t3="r3";
$A="r4";
$B="r5";
$C="r6";
@@ -52,71 +64,88 @@ my ($i,$a,$b,$c,$d,$e,$f,$g,$h) = @_;
$code.=<<___ if ($i<16);
#if __ARM_ARCH__>=7
- ldr $T1,[$inp],#4
+ @ ldr $t1,[$inp],#4 @ $i
+# if $i==15
+ str $inp,[sp,#17*4] @ make room for $t4
+# endif
+ eor $t0,$e,$e,ror#`$Sigma1[1]-$Sigma1[0]`
+ add $a,$a,$t2 @ h+=Maj(a,b,c) from the past
+ eor $t0,$t0,$e,ror#`$Sigma1[2]-$Sigma1[0]` @ Sigma1(e)
+ rev $t1,$t1
#else
- ldrb $T1,[$inp,#3] @ $i
+ @ ldrb $t1,[$inp,#3] @ $i
+ add $a,$a,$t2 @ h+=Maj(a,b,c) from the past
ldrb $t2,[$inp,#2]
- ldrb $t1,[$inp,#1]
- ldrb $t0,[$inp],#4
- orr $T1,$T1,$t2,lsl#8
- orr $T1,$T1,$t1,lsl#16
- orr $T1,$T1,$t0,lsl#24
+ ldrb $t0,[$inp,#1]
+ orr $t1,$t1,$t2,lsl#8
+ ldrb $t2,[$inp],#4
+ orr $t1,$t1,$t0,lsl#16
+# if $i==15
+ str $inp,[sp,#17*4] @ make room for $t4
+# endif
+ eor $t0,$e,$e,ror#`$Sigma1[1]-$Sigma1[0]`
+ orr $t1,$t1,$t2,lsl#24
+ eor $t0,$t0,$e,ror#`$Sigma1[2]-$Sigma1[0]` @ Sigma1(e)
#endif
___
$code.=<<___;
- mov $t0,$e,ror#$Sigma1[0]
ldr $t2,[$Ktbl],#4 @ *K256++
- eor $t0,$t0,$e,ror#$Sigma1[1]
+ add $h,$h,$t1 @ h+=X[i]
+ str $t1,[sp,#`$i%16`*4]
eor $t1,$f,$g
-#if $i>=16
- add $T1,$T1,$t3 @ from BODY_16_xx
-#elif __ARM_ARCH__>=7 && defined(__ARMEL__)
- rev $T1,$T1
-#endif
-#if $i==15
- str $inp,[sp,#17*4] @ leave room for $t3
-#endif
- eor $t0,$t0,$e,ror#$Sigma1[2] @ Sigma1(e)
+ add $h,$h,$t0,ror#$Sigma1[0] @ h+=Sigma1(e)
and $t1,$t1,$e
- str $T1,[sp,#`$i%16`*4]
- add $T1,$T1,$t0
+ add $h,$h,$t2 @ h+=K256[i]
eor $t1,$t1,$g @ Ch(e,f,g)
- add $T1,$T1,$h
- mov $h,$a,ror#$Sigma0[0]
- add $T1,$T1,$t1
- eor $h,$h,$a,ror#$Sigma0[1]
- add $T1,$T1,$t2
- eor $h,$h,$a,ror#$Sigma0[2] @ Sigma0(a)
-#if $i>=15
- ldr $t3,[sp,#`($i+2)%16`*4] @ from BODY_16_xx
+ eor $t0,$a,$a,ror#`$Sigma0[1]-$Sigma0[0]`
+ add $h,$h,$t1 @ h+=Ch(e,f,g)
+#if $i==31
+ and $t2,$t2,#0xff
+ cmp $t2,#0xf2 @ done?
#endif
- orr $t0,$a,$b
- and $t1,$a,$b
- and $t0,$t0,$c
- add $h,$h,$T1
- orr $t0,$t0,$t1 @ Maj(a,b,c)
- add $d,$d,$T1
- add $h,$h,$t0
+#if $i<15
+# if __ARM_ARCH__>=7
+ ldr $t1,[$inp],#4 @ prefetch
+# else
+ ldrb $t1,[$inp,#3]
+# endif
+ eor $t2,$a,$b @ a^b, b^c in next round
+#else
+ ldr $t1,[sp,#`($i+2)%16`*4] @ from future BODY_16_xx
+ eor $t2,$a,$b @ a^b, b^c in next round
+ ldr $t4,[sp,#`($i+15)%16`*4] @ from future BODY_16_xx
+#endif
+ eor $t0,$t0,$a,ror#`$Sigma0[2]-$Sigma0[0]` @ Sigma0(a)
+ and $t3,$t3,$t2 @ (b^c)&=(a^b)
+ add $d,$d,$h @ d+=h
+ eor $t3,$t3,$b @ Maj(a,b,c)
+ add $h,$h,$t0,ror#$Sigma0[0] @ h+=Sigma0(a)
+ @ add $h,$h,$t3 @ h+=Maj(a,b,c)
___
+ ($t2,$t3)=($t3,$t2);
}
sub BODY_16_XX {
my ($i,$a,$b,$c,$d,$e,$f,$g,$h) = @_;
$code.=<<___;
- @ ldr $t3,[sp,#`($i+1)%16`*4] @ $i
- ldr $t2,[sp,#`($i+14)%16`*4]
- mov $t0,$t3,ror#$sigma0[0]
- ldr $T1,[sp,#`($i+0)%16`*4]
- eor $t0,$t0,$t3,ror#$sigma0[1]
- ldr $t1,[sp,#`($i+9)%16`*4]
- eor $t0,$t0,$t3,lsr#$sigma0[2] @ sigma0(X[i+1])
- mov $t3,$t2,ror#$sigma1[0]
- add $T1,$T1,$t0
- eor $t3,$t3,$t2,ror#$sigma1[1]
- add $T1,$T1,$t1
- eor $t3,$t3,$t2,lsr#$sigma1[2] @ sigma1(X[i+14])
- @ add $T1,$T1,$t3
+ @ ldr $t1,[sp,#`($i+1)%16`*4] @ $i
+ @ ldr $t4,[sp,#`($i+14)%16`*4]
+ mov $t0,$t1,ror#$sigma0[0]
+ add $a,$a,$t2 @ h+=Maj(a,b,c) from the past
+ mov $t2,$t4,ror#$sigma1[0]
+ eor $t0,$t0,$t1,ror#$sigma0[1]
+ eor $t2,$t2,$t4,ror#$sigma1[1]
+ eor $t0,$t0,$t1,lsr#$sigma0[2] @ sigma0(X[i+1])
+ ldr $t1,[sp,#`($i+0)%16`*4]
+ eor $t2,$t2,$t4,lsr#$sigma1[2] @ sigma1(X[i+14])
+ ldr $t4,[sp,#`($i+9)%16`*4]
+
+ add $t2,$t2,$t0
+ eor $t0,$e,$e,ror#`$Sigma1[1]-$Sigma1[0]` @ from BODY_00_15
+ add $t1,$t1,$t2
+ eor $t0,$t0,$e,ror#`$Sigma1[2]-$Sigma1[0]` @ Sigma1(e)
+ add $t1,$t1,$t4 @ X[i]
___
&BODY_00_15(@_);
}
@@ -147,46 +176,66 @@ K256:
.word 0x748f82ee,0x78a5636f,0x84c87814,0x8cc70208
.word 0x90befffa,0xa4506ceb,0xbef9a3f7,0xc67178f2
.size K256,.-K256
+.word 0 @ terminator
+#if __ARM_MAX_ARCH__>=7
+.LOPENSSL_armcap:
+.word OPENSSL_armcap_P-sha256_block_data_order
+#endif
+.align 5
.global sha256_block_data_order
.type sha256_block_data_order,%function
sha256_block_data_order:
sub r3,pc,#8 @ sha256_block_data_order
add $len,$inp,$len,lsl#6 @ len to point at the end of inp
+#if __ARM_MAX_ARCH__>=7
+ ldr r12,.LOPENSSL_armcap
+ ldr r12,[r3,r12] @ OPENSSL_armcap_P
+ tst r12,#ARMV8_SHA256
+ bne .LARMv8
+ tst r12,#ARMV7_NEON
+ bne .LNEON
+#endif
stmdb sp!,{$ctx,$inp,$len,r4-r11,lr}
ldmia $ctx,{$A,$B,$C,$D,$E,$F,$G,$H}
- sub $Ktbl,r3,#256 @ K256
+ sub $Ktbl,r3,#256+32 @ K256
sub sp,sp,#16*4 @ alloca(X[16])
.Loop:
+# if __ARM_ARCH__>=7
+ ldr $t1,[$inp],#4
+# else
+ ldrb $t1,[$inp,#3]
+# endif
+ eor $t3,$B,$C @ magic
+ eor $t2,$t2,$t2
___
for($i=0;$i<16;$i++) { &BODY_00_15($i,@V); unshift(@V,pop(@V)); }
$code.=".Lrounds_16_xx:\n";
for (;$i<32;$i++) { &BODY_16_XX($i,@V); unshift(@V,pop(@V)); }
$code.=<<___;
- and $t2,$t2,#0xff
- cmp $t2,#0xf2
+ ldreq $t3,[sp,#16*4] @ pull ctx
bne .Lrounds_16_xx
- ldr $T1,[sp,#16*4] @ pull ctx
- ldr $t0,[$T1,#0]
- ldr $t1,[$T1,#4]
- ldr $t2,[$T1,#8]
+ add $A,$A,$t2 @ h+=Maj(a,b,c) from the past
+ ldr $t0,[$t3,#0]
+ ldr $t1,[$t3,#4]
+ ldr $t2,[$t3,#8]
add $A,$A,$t0
- ldr $t0,[$T1,#12]
+ ldr $t0,[$t3,#12]
add $B,$B,$t1
- ldr $t1,[$T1,#16]
+ ldr $t1,[$t3,#16]
add $C,$C,$t2
- ldr $t2,[$T1,#20]
+ ldr $t2,[$t3,#20]
add $D,$D,$t0
- ldr $t0,[$T1,#24]
+ ldr $t0,[$t3,#24]
add $E,$E,$t1
- ldr $t1,[$T1,#28]
+ ldr $t1,[$t3,#28]
add $F,$F,$t2
ldr $inp,[sp,#17*4] @ pull inp
ldr $t2,[sp,#18*4] @ pull inp+len
add $G,$G,$t0
add $H,$H,$t1
- stmia $T1,{$A,$B,$C,$D,$E,$F,$G,$H}
+ stmia $t3,{$A,$B,$C,$D,$E,$F,$G,$H}
cmp $inp,$t2
sub $Ktbl,$Ktbl,#256 @ rewind Ktbl
bne .Loop
@@ -200,12 +249,413 @@ $code.=<<___;
moveq pc,lr @ be binary compatible with V4, yet
bx lr @ interoperable with Thumb ISA:-)
#endif
-.size sha256_block_data_order,.-sha256_block_data_order
-.asciz "SHA256 block transform for ARMv4, CRYPTOGAMS by <appro\@openssl.org>"
+.size sha256_block_data_order,.-sha256_block_data_order
+___
+######################################################################
+# NEON stuff
+#
+{{{
+my @X=map("q$_",(0..3));
+my ($T0,$T1,$T2,$T3,$T4,$T5)=("q8","q9","q10","q11","d24","d25");
+my $Xfer=$t4;
+my $j=0;
+
+sub Dlo() { shift=~m|q([1]?[0-9])|?"d".($1*2):""; }
+sub Dhi() { shift=~m|q([1]?[0-9])|?"d".($1*2+1):""; }
+
+sub AUTOLOAD() # thunk [simplified] x86-style perlasm
+{ my $opcode = $AUTOLOAD; $opcode =~ s/.*:://; $opcode =~ s/_/\./;
+ my $arg = pop;
+ $arg = "#$arg" if ($arg*1 eq $arg);
+ $code .= "\t$opcode\t".join(',',@_,$arg)."\n";
+}
+
+sub Xupdate()
+{ use integer;
+ my $body = shift;
+ my @insns = (&$body,&$body,&$body,&$body);
+ my ($a,$b,$c,$d,$e,$f,$g,$h);
+
+ &vext_8 ($T0,@X[0],@X[1],4); # X[1..4]
+ eval(shift(@insns));
+ eval(shift(@insns));
+ eval(shift(@insns));
+ &vext_8 ($T1,@X[2],@X[3],4); # X[9..12]
+ eval(shift(@insns));
+ eval(shift(@insns));
+ eval(shift(@insns));
+ &vshr_u32 ($T2,$T0,$sigma0[0]);
+ eval(shift(@insns));
+ eval(shift(@insns));
+ &vadd_i32 (@X[0],@X[0],$T1); # X[0..3] += X[9..12]
+ eval(shift(@insns));
+ eval(shift(@insns));
+ &vshr_u32 ($T1,$T0,$sigma0[2]);
+ eval(shift(@insns));
+ eval(shift(@insns));
+ &vsli_32 ($T2,$T0,32-$sigma0[0]);
+ eval(shift(@insns));
+ eval(shift(@insns));
+ &vshr_u32 ($T3,$T0,$sigma0[1]);
+ eval(shift(@insns));
+ eval(shift(@insns));
+ &veor ($T1,$T1,$T2);
+ eval(shift(@insns));
+ eval(shift(@insns));
+ &vsli_32 ($T3,$T0,32-$sigma0[1]);
+ eval(shift(@insns));
+ eval(shift(@insns));
+ &vshr_u32 ($T4,&Dhi(@X[3]),$sigma1[0]);
+ eval(shift(@insns));
+ eval(shift(@insns));
+ &veor ($T1,$T1,$T3); # sigma0(X[1..4])
+ eval(shift(@insns));
+ eval(shift(@insns));
+ &vsli_32 ($T4,&Dhi(@X[3]),32-$sigma1[0]);
+ eval(shift(@insns));
+ eval(shift(@insns));
+ &vshr_u32 ($T5,&Dhi(@X[3]),$sigma1[2]);
+ eval(shift(@insns));
+ eval(shift(@insns));
+ &vadd_i32 (@X[0],@X[0],$T1); # X[0..3] += sigma0(X[1..4])
+ eval(shift(@insns));
+ eval(shift(@insns));
+ &veor ($T5,$T5,$T4);
+ eval(shift(@insns));
+ eval(shift(@insns));
+ &vshr_u32 ($T4,&Dhi(@X[3]),$sigma1[1]);
+ eval(shift(@insns));
+ eval(shift(@insns));
+ &vsli_32 ($T4,&Dhi(@X[3]),32-$sigma1[1]);
+ eval(shift(@insns));
+ eval(shift(@insns));
+ &veor ($T5,$T5,$T4); # sigma1(X[14..15])
+ eval(shift(@insns));
+ eval(shift(@insns));
+ &vadd_i32 (&Dlo(@X[0]),&Dlo(@X[0]),$T5);# X[0..1] += sigma1(X[14..15])
+ eval(shift(@insns));
+ eval(shift(@insns));
+ &vshr_u32 ($T4,&Dlo(@X[0]),$sigma1[0]);
+ eval(shift(@insns));
+ eval(shift(@insns));
+ &vsli_32 ($T4,&Dlo(@X[0]),32-$sigma1[0]);
+ eval(shift(@insns));
+ eval(shift(@insns));
+ &vshr_u32 ($T5,&Dlo(@X[0]),$sigma1[2]);
+ eval(shift(@insns));
+ eval(shift(@insns));
+ &veor ($T5,$T5,$T4);
+ eval(shift(@insns));
+ eval(shift(@insns));
+ &vshr_u32 ($T4,&Dlo(@X[0]),$sigma1[1]);
+ eval(shift(@insns));
+ eval(shift(@insns));
+ &vld1_32 ("{$T0}","[$Ktbl,:128]!");
+ eval(shift(@insns));
+ eval(shift(@insns));
+ &vsli_32 ($T4,&Dlo(@X[0]),32-$sigma1[1]);
+ eval(shift(@insns));
+ eval(shift(@insns));
+ &veor ($T5,$T5,$T4); # sigma1(X[16..17])
+ eval(shift(@insns));
+ eval(shift(@insns));
+ &vadd_i32 (&Dhi(@X[0]),&Dhi(@X[0]),$T5);# X[2..3] += sigma1(X[16..17])
+ eval(shift(@insns));
+ eval(shift(@insns));
+ &vadd_i32 ($T0,$T0,@X[0]);
+ while($#insns>=2) { eval(shift(@insns)); }
+ &vst1_32 ("{$T0}","[$Xfer,:128]!");
+ eval(shift(@insns));
+ eval(shift(@insns));
+
+ push(@X,shift(@X)); # "rotate" X[]
+}
+
+sub Xpreload()
+{ use integer;
+ my $body = shift;
+ my @insns = (&$body,&$body,&$body,&$body);
+ my ($a,$b,$c,$d,$e,$f,$g,$h);
+
+ eval(shift(@insns));
+ eval(shift(@insns));
+ eval(shift(@insns));
+ eval(shift(@insns));
+ &vld1_32 ("{$T0}","[$Ktbl,:128]!");
+ eval(shift(@insns));
+ eval(shift(@insns));
+ eval(shift(@insns));
+ eval(shift(@insns));
+ &vrev32_8 (@X[0],@X[0]);
+ eval(shift(@insns));
+ eval(shift(@insns));
+ eval(shift(@insns));
+ eval(shift(@insns));
+ &vadd_i32 ($T0,$T0,@X[0]);
+ foreach (@insns) { eval; } # remaining instructions
+ &vst1_32 ("{$T0}","[$Xfer,:128]!");
+
+ push(@X,shift(@X)); # "rotate" X[]
+}
+
+sub body_00_15 () {
+ (
+ '($a,$b,$c,$d,$e,$f,$g,$h)=@V;'.
+ '&add ($h,$h,$t1)', # h+=X[i]+K[i]
+ '&eor ($t1,$f,$g)',
+ '&eor ($t0,$e,$e,"ror#".($Sigma1[1]-$Sigma1[0]))',
+ '&add ($a,$a,$t2)', # h+=Maj(a,b,c) from the past
+ '&and ($t1,$t1,$e)',
+ '&eor ($t2,$t0,$e,"ror#".($Sigma1[2]-$Sigma1[0]))', # Sigma1(e)
+ '&eor ($t0,$a,$a,"ror#".($Sigma0[1]-$Sigma0[0]))',
+ '&eor ($t1,$t1,$g)', # Ch(e,f,g)
+ '&add ($h,$h,$t2,"ror#$Sigma1[0]")', # h+=Sigma1(e)
+ '&eor ($t2,$a,$b)', # a^b, b^c in next round
+ '&eor ($t0,$t0,$a,"ror#".($Sigma0[2]-$Sigma0[0]))', # Sigma0(a)
+ '&add ($h,$h,$t1)', # h+=Ch(e,f,g)
+ '&ldr ($t1,sprintf "[sp,#%d]",4*(($j+1)&15)) if (($j&15)!=15);'.
+ '&ldr ($t1,"[$Ktbl]") if ($j==15);'.
+ '&ldr ($t1,"[sp,#64]") if ($j==31)',
+ '&and ($t3,$t3,$t2)', # (b^c)&=(a^b)
+ '&add ($d,$d,$h)', # d+=h
+ '&add ($h,$h,$t0,"ror#$Sigma0[0]");'. # h+=Sigma0(a)
+ '&eor ($t3,$t3,$b)', # Maj(a,b,c)
+ '$j++; unshift(@V,pop(@V)); ($t2,$t3)=($t3,$t2);'
+ )
+}
+
+$code.=<<___;
+#if __ARM_MAX_ARCH__>=7
+.arch armv7-a
+.fpu neon
+
+.type sha256_block_data_order_neon,%function
+.align 4
+sha256_block_data_order_neon:
+.LNEON:
+ stmdb sp!,{r4-r12,lr}
+
+ mov $t2,sp
+ sub sp,sp,#16*4+16 @ alloca
+ sub $Ktbl,r3,#256+32 @ K256
+ bic sp,sp,#15 @ align for 128-bit stores
+
+ vld1.8 {@X[0]},[$inp]!
+ vld1.8 {@X[1]},[$inp]!
+ vld1.8 {@X[2]},[$inp]!
+ vld1.8 {@X[3]},[$inp]!
+ vld1.32 {$T0},[$Ktbl,:128]!
+ vld1.32 {$T1},[$Ktbl,:128]!
+ vld1.32 {$T2},[$Ktbl,:128]!
+ vld1.32 {$T3},[$Ktbl,:128]!
+ vrev32.8 @X[0],@X[0] @ yes, even on
+ str $ctx,[sp,#64]
+ vrev32.8 @X[1],@X[1] @ big-endian
+ str $inp,[sp,#68]
+ mov $Xfer,sp
+ vrev32.8 @X[2],@X[2]
+ str $len,[sp,#72]
+ vrev32.8 @X[3],@X[3]
+ str $t2,[sp,#76] @ save original sp
+ vadd.i32 $T0,$T0,@X[0]
+ vadd.i32 $T1,$T1,@X[1]
+ vst1.32 {$T0},[$Xfer,:128]!
+ vadd.i32 $T2,$T2,@X[2]
+ vst1.32 {$T1},[$Xfer,:128]!
+ vadd.i32 $T3,$T3,@X[3]
+ vst1.32 {$T2},[$Xfer,:128]!
+ vst1.32 {$T3},[$Xfer,:128]!
+
+ ldmia $ctx,{$A-$H}
+ sub $Xfer,$Xfer,#64
+ ldr $t1,[sp,#0]
+ eor $t2,$t2,$t2
+ eor $t3,$B,$C
+ b .L_00_48
+
+.align 4
+.L_00_48:
+___
+ &Xupdate(\&body_00_15);
+ &Xupdate(\&body_00_15);
+ &Xupdate(\&body_00_15);
+ &Xupdate(\&body_00_15);
+$code.=<<___;
+ teq $t1,#0 @ check for K256 terminator
+ ldr $t1,[sp,#0]
+ sub $Xfer,$Xfer,#64
+ bne .L_00_48
+
+ ldr $inp,[sp,#68]
+ ldr $t0,[sp,#72]
+ sub $Ktbl,$Ktbl,#256 @ rewind $Ktbl
+ teq $inp,$t0
+ subeq $inp,$inp,#64 @ avoid SEGV
+ vld1.8 {@X[0]},[$inp]! @ load next input block
+ vld1.8 {@X[1]},[$inp]!
+ vld1.8 {@X[2]},[$inp]!
+ vld1.8 {@X[3]},[$inp]!
+ strne $inp,[sp,#68]
+ mov $Xfer,sp
+___
+ &Xpreload(\&body_00_15);
+ &Xpreload(\&body_00_15);
+ &Xpreload(\&body_00_15);
+ &Xpreload(\&body_00_15);
+$code.=<<___;
+ ldr $t0,[$t1,#0]
+ add $A,$A,$t2 @ h+=Maj(a,b,c) from the past
+ ldr $t2,[$t1,#4]
+ ldr $t3,[$t1,#8]
+ ldr $t4,[$t1,#12]
+ add $A,$A,$t0 @ accumulate
+ ldr $t0,[$t1,#16]
+ add $B,$B,$t2
+ ldr $t2,[$t1,#20]
+ add $C,$C,$t3
+ ldr $t3,[$t1,#24]
+ add $D,$D,$t4
+ ldr $t4,[$t1,#28]
+ add $E,$E,$t0
+ str $A,[$t1],#4
+ add $F,$F,$t2
+ str $B,[$t1],#4
+ add $G,$G,$t3
+ str $C,[$t1],#4
+ add $H,$H,$t4
+ str $D,[$t1],#4
+ stmia $t1,{$E-$H}
+
+ movne $Xfer,sp
+ ldrne $t1,[sp,#0]
+ eorne $t2,$t2,$t2
+ ldreq sp,[sp,#76] @ restore original sp
+ eorne $t3,$B,$C
+ bne .L_00_48
+
+ ldmia sp!,{r4-r12,pc}
+.size sha256_block_data_order_neon,.-sha256_block_data_order_neon
+#endif
+___
+}}}
+######################################################################
+# ARMv8 stuff
+#
+{{{
+my ($ABCD,$EFGH,$abcd)=map("q$_",(0..2));
+my @MSG=map("q$_",(8..11));
+my ($W0,$W1,$ABCD_SAVE,$EFGH_SAVE)=map("q$_",(12..15));
+my $Ktbl="r3";
+
+$code.=<<___;
+#if __ARM_MAX_ARCH__>=7
+.type sha256_block_data_order_armv8,%function
+.align 5
+sha256_block_data_order_armv8:
+.LARMv8:
+ vld1.32 {$ABCD,$EFGH},[$ctx]
+ sub $Ktbl,r3,#sha256_block_data_order-K256
+
+.Loop_v8:
+ vld1.8 {@MSG[0]-@MSG[1]},[$inp]!
+ vld1.8 {@MSG[2]-@MSG[3]},[$inp]!
+ vld1.32 {$W0},[$Ktbl]!
+ vrev32.8 @MSG[0],@MSG[0]
+ vrev32.8 @MSG[1],@MSG[1]
+ vrev32.8 @MSG[2],@MSG[2]
+ vrev32.8 @MSG[3],@MSG[3]
+ vmov $ABCD_SAVE,$ABCD @ offload
+ vmov $EFGH_SAVE,$EFGH
+ teq $inp,$len
+___
+for($i=0;$i<12;$i++) {
+$code.=<<___;
+ vld1.32 {$W1},[$Ktbl]!
+ vadd.i32 $W0,$W0,@MSG[0]
+ sha256su0 @MSG[0],@MSG[1]
+ vmov $abcd,$ABCD
+ sha256h $ABCD,$EFGH,$W0
+ sha256h2 $EFGH,$abcd,$W0
+ sha256su1 @MSG[0],@MSG[2],@MSG[3]
+___
+ ($W0,$W1)=($W1,$W0); push(@MSG,shift(@MSG));
+}
+$code.=<<___;
+ vld1.32 {$W1},[$Ktbl]!
+ vadd.i32 $W0,$W0,@MSG[0]
+ vmov $abcd,$ABCD
+ sha256h $ABCD,$EFGH,$W0
+ sha256h2 $EFGH,$abcd,$W0
+
+ vld1.32 {$W0},[$Ktbl]!
+ vadd.i32 $W1,$W1,@MSG[1]
+ vmov $abcd,$ABCD
+ sha256h $ABCD,$EFGH,$W1
+ sha256h2 $EFGH,$abcd,$W1
+
+ vld1.32 {$W1},[$Ktbl]
+ vadd.i32 $W0,$W0,@MSG[2]
+ sub $Ktbl,$Ktbl,#256-16 @ rewind
+ vmov $abcd,$ABCD
+ sha256h $ABCD,$EFGH,$W0
+ sha256h2 $EFGH,$abcd,$W0
+
+ vadd.i32 $W1,$W1,@MSG[3]
+ vmov $abcd,$ABCD
+ sha256h $ABCD,$EFGH,$W1
+ sha256h2 $EFGH,$abcd,$W1
+
+ vadd.i32 $ABCD,$ABCD,$ABCD_SAVE
+ vadd.i32 $EFGH,$EFGH,$EFGH_SAVE
+ bne .Loop_v8
+
+ vst1.32 {$ABCD,$EFGH},[$ctx]
+
+ ret @ bx lr
+.size sha256_block_data_order_armv8,.-sha256_block_data_order_armv8
+#endif
+___
+}}}
+$code.=<<___;
+.asciz "SHA256 block transform for ARMv4/NEON/ARMv8, CRYPTOGAMS by <appro\@openssl.org>"
.align 2
+#if __ARM_MAX_ARCH__>=7
+.comm OPENSSL_armcap_P,4,4
+#endif
___
-$code =~ s/\`([^\`]*)\`/eval $1/gem;
-$code =~ s/\bbx\s+lr\b/.word\t0xe12fff1e/gm; # make it possible to compile with -march=armv4
-print $code;
+{ my %opcode = (
+ "sha256h" => 0xf3000c40, "sha256h2" => 0xf3100c40,
+ "sha256su0" => 0xf3ba03c0, "sha256su1" => 0xf3200c40 );
+
+ sub unsha256 {
+ my ($mnemonic,$arg)=@_;
+
+ if ($arg =~ m/q([0-9]+)(?:,\s*q([0-9]+))?,\s*q([0-9]+)/o) {
+ my $word = $opcode{$mnemonic}|(($1&7)<<13)|(($1&8)<<19)
+ |(($2&7)<<17)|(($2&8)<<4)
+ |(($3&7)<<1) |(($3&8)<<2);
+ # since ARMv7 instructions are always encoded little-endian.
+ # correct solution is to use .inst directive, but older
+ # assemblers don't implement it:-(
+ sprintf ".byte\t0x%02x,0x%02x,0x%02x,0x%02x\t@ %s %s",
+ $word&0xff,($word>>8)&0xff,
+ ($word>>16)&0xff,($word>>24)&0xff,
+ $mnemonic,$arg;
+ }
+ }
+}
+
+foreach (split($/,$code)) {
+
+ s/\`([^\`]*)\`/eval $1/geo;
+
+ s/\b(sha256\w+)\s+(q.*)/unsha256($1,$2)/geo;
+
+ s/\bret\b/bx lr/go or
+ s/\bbx\s+lr\b/.word\t0xe12fff1e/go; # make it possible to compile with -march=armv4
+
+ print $_,"\n";
+}
+
close STDOUT; # enforce flush