aboutsummaryrefslogtreecommitdiff
path: root/openssl/crypto/sha/asm
diff options
context:
space:
mode:
Diffstat (limited to 'openssl/crypto/sha/asm')
-rw-r--r--openssl/crypto/sha/asm/sha1-586.pl1107
-rw-r--r--openssl/crypto/sha/asm/sha1-alpha.pl322
-rw-r--r--openssl/crypto/sha/asm/sha1-armv4-large.pl38
-rw-r--r--openssl/crypto/sha/asm/sha1-ia64.pl192
-rw-r--r--openssl/crypto/sha/asm/sha1-mips.pl354
-rw-r--r--openssl/crypto/sha/asm/sha1-parisc.pl259
-rw-r--r--openssl/crypto/sha/asm/sha1-ppc.pl83
-rw-r--r--openssl/crypto/sha/asm/sha1-s390x.pl50
-rw-r--r--openssl/crypto/sha/asm/sha1-x86_64.pl1185
-rw-r--r--openssl/crypto/sha/asm/sha256-586.pl52
-rw-r--r--openssl/crypto/sha/asm/sha256-armv4.pl55
-rw-r--r--openssl/crypto/sha/asm/sha512-armv4.pl357
-rw-r--r--openssl/crypto/sha/asm/sha512-mips.pl455
-rw-r--r--openssl/crypto/sha/asm/sha512-parisc.pl791
-rw-r--r--openssl/crypto/sha/asm/sha512-ppc.pl114
-rw-r--r--openssl/crypto/sha/asm/sha512-s390x.pl63
-rw-r--r--openssl/crypto/sha/asm/sha512-sparcv9.pl6
-rw-r--r--openssl/crypto/sha/asm/sha512-x86_64.pl86
18 files changed, 4964 insertions, 605 deletions
diff --git a/openssl/crypto/sha/asm/sha1-586.pl b/openssl/crypto/sha/asm/sha1-586.pl
index a1f876281..1084d227f 100644
--- a/openssl/crypto/sha/asm/sha1-586.pl
+++ b/openssl/crypto/sha/asm/sha1-586.pl
@@ -12,6 +12,8 @@
# commentary below], and in 2006 the rest was rewritten in order to
# gain freedom to liberate licensing terms.
+# January, September 2004.
+#
# It was noted that Intel IA-32 C compiler generates code which
# performs ~30% *faster* on P4 CPU than original *hand-coded*
# SHA1 assembler implementation. To address this problem (and
@@ -31,12 +33,92 @@
# ----------------------------------------------------------------
# <appro@fy.chalmers.se>
+# August 2009.
+#
+# George Spelvin has tipped that F_40_59(b,c,d) can be rewritten as
+# '(c&d) + (b&(c^d))', which allows to accumulate partial results
+# and lighten "pressure" on scratch registers. This resulted in
+# >12% performance improvement on contemporary AMD cores (with no
+# degradation on other CPUs:-). Also, the code was revised to maximize
+# "distance" between instructions producing input to 'lea' instruction
+# and the 'lea' instruction itself, which is essential for Intel Atom
+# core and resulted in ~15% improvement.
+
+# October 2010.
+#
+# Add SSSE3, Supplemental[!] SSE3, implementation. The idea behind it
+# is to offload message schedule denoted by Wt in NIST specification,
+# or Xupdate in OpenSSL source, to SIMD unit. The idea is not novel,
+# and in SSE2 context was first explored by Dean Gaudet in 2004, see
+# http://arctic.org/~dean/crypto/sha1.html. Since then several things
+# have changed that made it interesting again:
+#
+# a) XMM units became faster and wider;
+# b) instruction set became more versatile;
+# c) an important observation was made by Max Locktykhin, which made
+# it possible to reduce amount of instructions required to perform
+# the operation in question, for further details see
+# http://software.intel.com/en-us/articles/improving-the-performance-of-the-secure-hash-algorithm-1/.
+
+# April 2011.
+#
+# Add AVX code path, probably most controversial... The thing is that
+# switch to AVX alone improves performance by as little as 4% in
+# comparison to SSSE3 code path. But below result doesn't look like
+# 4% improvement... Trouble is that Sandy Bridge decodes 'ro[rl]' as
+# pair of µ-ops, and it's the additional µ-ops, two per round, that
+# make it run slower than Core2 and Westmere. But 'sh[rl]d' is decoded
+# as single µ-op by Sandy Bridge and it's replacing 'ro[rl]' with
+# equivalent 'sh[rl]d' that is responsible for the impressive 5.1
+# cycles per processed byte. But 'sh[rl]d' is not something that used
+# to be fast, nor does it appear to be fast in upcoming Bulldozer
+# [according to its optimization manual]. Which is why AVX code path
+# is guarded by *both* AVX and synthetic bit denoting Intel CPUs.
+# One can argue that it's unfair to AMD, but without 'sh[rl]d' it
+# makes no sense to keep the AVX code path. If somebody feels that
+# strongly, it's probably more appropriate to discuss possibility of
+# using vector rotate XOP on AMD...
+
+######################################################################
+# Current performance is summarized in following table. Numbers are
+# CPU clock cycles spent to process single byte (less is better).
+#
+# x86 SSSE3 AVX
+# Pentium 15.7 -
+# PIII 11.5 -
+# P4 10.6 -
+# AMD K8 7.1 -
+# Core2 7.3 6.1/+20% -
+# Atom 12.5 9.5(*)/+32% -
+# Westmere 7.3 5.6/+30% -
+# Sandy Bridge 8.8 6.2/+40% 5.1(**)/+70%
+#
+# (*) Loop is 1056 instructions long and expected result is ~8.25.
+# It remains mystery [to me] why ILP is limited to 1.7.
+#
+# (**) As per above comment, the result is for AVX *plus* sh[rl]d.
+
$0 =~ m/(.*[\/\\])[^\/\\]+$/; $dir=$1;
push(@INC,"${dir}","${dir}../../perlasm");
require "x86asm.pl";
&asm_init($ARGV[0],"sha1-586.pl",$ARGV[$#ARGV] eq "386");
+$xmm=$ymm=0;
+for (@ARGV) { $xmm=1 if (/-DOPENSSL_IA32_SSE2/); }
+
+$ymm=1 if ($xmm &&
+ `$ENV{CC} -Wa,-v -c -o /dev/null -x assembler /dev/null 2>&1`
+ =~ /GNU assembler version ([2-9]\.[0-9]+)/ &&
+ $1>=2.19); # first version supporting AVX
+
+$ymm=1 if ($xmm && !$ymm && $ARGV[0] eq "win32n" &&
+ `nasm -v 2>&1` =~ /NASM version ([2-9]\.[0-9]+)/ &&
+ $1>=2.03); # first version supporting AVX
+
+&external_label("OPENSSL_ia32cap_P") if ($xmm);
+
+
$A="eax";
$B="ebx";
$C="ecx";
@@ -47,6 +129,10 @@ $tmp1="ebp";
@V=($A,$B,$C,$D,$E,$T);
+$alt=0; # 1 denotes alternative IALU implementation, which performs
+ # 8% *worse* on P4, same on Westmere and Atom, 2% better on
+ # Sandy Bridge...
+
sub BODY_00_15
{
local($n,$a,$b,$c,$d,$e,$f)=@_;
@@ -59,16 +145,18 @@ sub BODY_00_15
&rotl($tmp1,5); # tmp1=ROTATE(a,5)
&xor($f,$d);
&add($tmp1,$e); # tmp1+=e;
- &and($f,$b);
- &mov($e,&swtmp($n%16)); # e becomes volatile and is loaded
+ &mov($e,&swtmp($n%16)); # e becomes volatile and is loaded
# with xi, also note that e becomes
# f in next round...
- &xor($f,$d); # f holds F_00_19(b,c,d)
+ &and($f,$b);
&rotr($b,2); # b=ROTATE(b,30)
- &lea($tmp1,&DWP(0x5a827999,$tmp1,$e)); # tmp1+=K_00_19+xi
+ &xor($f,$d); # f holds F_00_19(b,c,d)
+ &lea($tmp1,&DWP(0x5a827999,$tmp1,$e)); # tmp1+=K_00_19+xi
- if ($n==15) { &add($f,$tmp1); } # f+=tmp1
+ if ($n==15) { &mov($e,&swtmp(($n+1)%16));# pre-fetch f for next round
+ &add($f,$tmp1); } # f+=tmp1
else { &add($tmp1,$f); } # f becomes a in next round
+ &mov($tmp1,$a) if ($alt && $n==15);
}
sub BODY_16_19
@@ -77,22 +165,41 @@ sub BODY_16_19
&comment("16_19 $n");
- &mov($f,&swtmp($n%16)); # f to hold Xupdate(xi,xa,xb,xc,xd)
- &mov($tmp1,$c); # tmp1 to hold F_00_19(b,c,d)
- &xor($f,&swtmp(($n+2)%16));
- &xor($tmp1,$d);
- &xor($f,&swtmp(($n+8)%16));
- &and($tmp1,$b); # tmp1 holds F_00_19(b,c,d)
- &rotr($b,2); # b=ROTATE(b,30)
+if ($alt) {
+ &xor($c,$d);
+ &xor($f,&swtmp(($n+2)%16)); # f to hold Xupdate(xi,xa,xb,xc,xd)
+ &and($tmp1,$c); # tmp1 to hold F_00_19(b,c,d), b&=c^d
+ &xor($f,&swtmp(($n+8)%16));
+ &xor($tmp1,$d); # tmp1=F_00_19(b,c,d)
+ &xor($f,&swtmp(($n+13)%16)); # f holds xa^xb^xc^xd
+ &rotl($f,1); # f=ROTATE(f,1)
+ &add($e,$tmp1); # e+=F_00_19(b,c,d)
+ &xor($c,$d); # restore $c
+ &mov($tmp1,$a); # b in next round
+ &rotr($b,$n==16?2:7); # b=ROTATE(b,30)
+ &mov(&swtmp($n%16),$f); # xi=f
+ &rotl($a,5); # ROTATE(a,5)
+ &lea($f,&DWP(0x5a827999,$f,$e));# f+=F_00_19(b,c,d)+e
+ &mov($e,&swtmp(($n+1)%16)); # pre-fetch f for next round
+ &add($f,$a); # f+=ROTATE(a,5)
+} else {
+ &mov($tmp1,$c); # tmp1 to hold F_00_19(b,c,d)
+ &xor($f,&swtmp(($n+2)%16)); # f to hold Xupdate(xi,xa,xb,xc,xd)
+ &xor($tmp1,$d);
+ &xor($f,&swtmp(($n+8)%16));
+ &and($tmp1,$b);
&xor($f,&swtmp(($n+13)%16)); # f holds xa^xb^xc^xd
&rotl($f,1); # f=ROTATE(f,1)
&xor($tmp1,$d); # tmp1=F_00_19(b,c,d)
- &mov(&swtmp($n%16),$f); # xi=f
- &lea($f,&DWP(0x5a827999,$f,$e));# f+=K_00_19+e
- &mov($e,$a); # e becomes volatile
- &rotl($e,5); # e=ROTATE(a,5)
- &add($f,$tmp1); # f+=F_00_19(b,c,d)
- &add($f,$e); # f+=ROTATE(a,5)
+ &add($e,$tmp1); # e+=F_00_19(b,c,d)
+ &mov($tmp1,$a);
+ &rotr($b,2); # b=ROTATE(b,30)
+ &mov(&swtmp($n%16),$f); # xi=f
+ &rotl($tmp1,5); # ROTATE(a,5)
+ &lea($f,&DWP(0x5a827999,$f,$e));# f+=F_00_19(b,c,d)+e
+ &mov($e,&swtmp(($n+1)%16)); # pre-fetch f for next round
+ &add($f,$tmp1); # f+=ROTATE(a,5)
+}
}
sub BODY_20_39
@@ -102,21 +209,41 @@ sub BODY_20_39
&comment("20_39 $n");
+if ($alt) {
+ &xor($tmp1,$c); # tmp1 to hold F_20_39(b,c,d), b^=c
+ &xor($f,&swtmp(($n+2)%16)); # f to hold Xupdate(xi,xa,xb,xc,xd)
+ &xor($tmp1,$d); # tmp1 holds F_20_39(b,c,d)
+ &xor($f,&swtmp(($n+8)%16));
+ &add($e,$tmp1); # e+=F_20_39(b,c,d)
+ &xor($f,&swtmp(($n+13)%16)); # f holds xa^xb^xc^xd
+ &rotl($f,1); # f=ROTATE(f,1)
+ &mov($tmp1,$a); # b in next round
+ &rotr($b,7); # b=ROTATE(b,30)
+ &mov(&swtmp($n%16),$f) if($n<77);# xi=f
+ &rotl($a,5); # ROTATE(a,5)
+ &xor($b,$c) if($n==39);# warm up for BODY_40_59
+ &and($tmp1,$b) if($n==39);
+ &lea($f,&DWP($K,$f,$e)); # f+=e+K_XX_YY
+ &mov($e,&swtmp(($n+1)%16)) if($n<79);# pre-fetch f for next round
+ &add($f,$a); # f+=ROTATE(a,5)
+ &rotr($a,5) if ($n==79);
+} else {
&mov($tmp1,$b); # tmp1 to hold F_20_39(b,c,d)
- &mov($f,&swtmp($n%16)); # f to hold Xupdate(xi,xa,xb,xc,xd)
- &rotr($b,2); # b=ROTATE(b,30)
- &xor($f,&swtmp(($n+2)%16));
+ &xor($f,&swtmp(($n+2)%16)); # f to hold Xupdate(xi,xa,xb,xc,xd)
&xor($tmp1,$c);
&xor($f,&swtmp(($n+8)%16));
&xor($tmp1,$d); # tmp1 holds F_20_39(b,c,d)
&xor($f,&swtmp(($n+13)%16)); # f holds xa^xb^xc^xd
&rotl($f,1); # f=ROTATE(f,1)
- &add($tmp1,$e);
- &mov(&swtmp($n%16),$f); # xi=f
- &mov($e,$a); # e becomes volatile
- &rotl($e,5); # e=ROTATE(a,5)
- &lea($f,&DWP($K,$f,$tmp1)); # f+=K_20_39+e
- &add($f,$e); # f+=ROTATE(a,5)
+ &add($e,$tmp1); # e+=F_20_39(b,c,d)
+ &rotr($b,2); # b=ROTATE(b,30)
+ &mov($tmp1,$a);
+ &rotl($tmp1,5); # ROTATE(a,5)
+ &mov(&swtmp($n%16),$f) if($n<77);# xi=f
+ &lea($f,&DWP($K,$f,$e)); # f+=e+K_XX_YY
+ &mov($e,&swtmp(($n+1)%16)) if($n<79);# pre-fetch f for next round
+ &add($f,$tmp1); # f+=ROTATE(a,5)
+}
}
sub BODY_40_59
@@ -125,41 +252,86 @@ sub BODY_40_59
&comment("40_59 $n");
- &mov($f,&swtmp($n%16)); # f to hold Xupdate(xi,xa,xb,xc,xd)
- &mov($tmp1,&swtmp(($n+2)%16));
- &xor($f,$tmp1);
- &mov($tmp1,&swtmp(($n+8)%16));
- &xor($f,$tmp1);
- &mov($tmp1,&swtmp(($n+13)%16));
- &xor($f,$tmp1); # f holds xa^xb^xc^xd
- &mov($tmp1,$b); # tmp1 to hold F_40_59(b,c,d)
+if ($alt) {
+ &add($e,$tmp1); # e+=b&(c^d)
+ &xor($f,&swtmp(($n+2)%16)); # f to hold Xupdate(xi,xa,xb,xc,xd)
+ &mov($tmp1,$d);
+ &xor($f,&swtmp(($n+8)%16));
+ &xor($c,$d); # restore $c
+ &xor($f,&swtmp(($n+13)%16)); # f holds xa^xb^xc^xd
&rotl($f,1); # f=ROTATE(f,1)
- &or($tmp1,$c);
- &mov(&swtmp($n%16),$f); # xi=f
- &and($tmp1,$d);
- &lea($f,&DWP(0x8f1bbcdc,$f,$e));# f+=K_40_59+e
- &mov($e,$b); # e becomes volatile and is used
- # to calculate F_40_59(b,c,d)
+ &and($tmp1,$c);
+ &rotr($b,7); # b=ROTATE(b,30)
+ &add($e,$tmp1); # e+=c&d
+ &mov($tmp1,$a); # b in next round
+ &mov(&swtmp($n%16),$f); # xi=f
+ &rotl($a,5); # ROTATE(a,5)
+ &xor($b,$c) if ($n<59);
+ &and($tmp1,$b) if ($n<59);# tmp1 to hold F_40_59(b,c,d)
+ &lea($f,&DWP(0x8f1bbcdc,$f,$e));# f+=K_40_59+e+(b&(c^d))
+ &mov($e,&swtmp(($n+1)%16)); # pre-fetch f for next round
+ &add($f,$a); # f+=ROTATE(a,5)
+} else {
+ &mov($tmp1,$c); # tmp1 to hold F_40_59(b,c,d)
+ &xor($f,&swtmp(($n+2)%16)); # f to hold Xupdate(xi,xa,xb,xc,xd)
+ &xor($tmp1,$d);
+ &xor($f,&swtmp(($n+8)%16));
+ &and($tmp1,$b);
+ &xor($f,&swtmp(($n+13)%16)); # f holds xa^xb^xc^xd
+ &rotl($f,1); # f=ROTATE(f,1)
+ &add($tmp1,$e); # b&(c^d)+=e
&rotr($b,2); # b=ROTATE(b,30)
- &and($e,$c);
- &or($tmp1,$e); # tmp1 holds F_40_59(b,c,d)
- &mov($e,$a);
- &rotl($e,5); # e=ROTATE(a,5)
- &add($f,$tmp1); # f+=tmp1;
+ &mov($e,$a); # e becomes volatile
+ &rotl($e,5); # ROTATE(a,5)
+ &mov(&swtmp($n%16),$f); # xi=f
+ &lea($f,&DWP(0x8f1bbcdc,$f,$tmp1));# f+=K_40_59+e+(b&(c^d))
+ &mov($tmp1,$c);
&add($f,$e); # f+=ROTATE(a,5)
+ &and($tmp1,$d);
+ &mov($e,&swtmp(($n+1)%16)); # pre-fetch f for next round
+ &add($f,$tmp1); # f+=c&d
+}
}
&function_begin("sha1_block_data_order");
+if ($xmm) {
+ &static_label("ssse3_shortcut");
+ &static_label("avx_shortcut") if ($ymm);
+ &static_label("K_XX_XX");
+
+ &call (&label("pic_point")); # make it PIC!
+ &set_label("pic_point");
+ &blindpop($tmp1);
+ &picmeup($T,"OPENSSL_ia32cap_P",$tmp1,&label("pic_point"));
+ &lea ($tmp1,&DWP(&label("K_XX_XX")."-".&label("pic_point"),$tmp1));
+
+ &mov ($A,&DWP(0,$T));
+ &mov ($D,&DWP(4,$T));
+ &test ($D,1<<9); # check SSSE3 bit
+ &jz (&label("x86"));
+ &test ($A,1<<24); # check FXSR bit
+ &jz (&label("x86"));
+ if ($ymm) {
+ &and ($D,1<<28); # mask AVX bit
+ &and ($A,1<<30); # mask "Intel CPU" bit
+ &or ($A,$D);
+ &cmp ($A,1<<28|1<<30);
+ &je (&label("avx_shortcut"));
+ }
+ &jmp (&label("ssse3_shortcut"));
+ &set_label("x86",16);
+}
&mov($tmp1,&wparam(0)); # SHA_CTX *c
&mov($T,&wparam(1)); # const void *input
&mov($A,&wparam(2)); # size_t num
- &stack_push(16); # allocate X[16]
+ &stack_push(16+3); # allocate X[16]
&shl($A,6);
&add($A,$T);
&mov(&wparam(2),$A); # pointer beyond the end of input
&mov($E,&DWP(16,$tmp1));# pre-load E
+ &jmp(&label("loop"));
- &set_label("loop",16);
+&set_label("loop",16);
# copy input chunk to X, but reversing byte order!
for ($i=0; $i<16; $i+=4)
@@ -213,8 +385,845 @@ sub BODY_40_59
&mov(&DWP(16,$tmp1),$C);
&jb(&label("loop"));
- &stack_pop(16);
+ &stack_pop(16+3);
&function_end("sha1_block_data_order");
+
+if ($xmm) {
+######################################################################
+# The SSSE3 implementation.
+#
+# %xmm[0-7] are used as ring @X[] buffer containing quadruples of last
+# 32 elements of the message schedule or Xupdate outputs. First 4
+# quadruples are simply byte-swapped input, next 4 are calculated
+# according to method originally suggested by Dean Gaudet (modulo
+# being implemented in SSSE3). Once 8 quadruples or 32 elements are
+# collected, it switches to routine proposed by Max Locktyukhin.
+#
+# Calculations inevitably require temporary reqisters, and there are
+# no %xmm registers left to spare. For this reason part of the ring
+# buffer, X[2..4] to be specific, is offloaded to 3 quadriples ring
+# buffer on the stack. Keep in mind that X[2] is alias X[-6], X[3] -
+# X[-5], and X[4] - X[-4]...
+#
+# Another notable optimization is aggressive stack frame compression
+# aiming to minimize amount of 9-byte instructions...
+#
+# Yet another notable optimization is "jumping" $B variable. It means
+# that there is no register permanently allocated for $B value. This
+# allowed to eliminate one instruction from body_20_39...
+#
+my $Xi=4; # 4xSIMD Xupdate round, start pre-seeded
+my @X=map("xmm$_",(4..7,0..3)); # pre-seeded for $Xi=4
+my @V=($A,$B,$C,$D,$E);
+my $j=0; # hash round
+my @T=($T,$tmp1);
+my $inp;
+
+my $_rol=sub { &rol(@_) };
+my $_ror=sub { &ror(@_) };
+
+&function_begin("_sha1_block_data_order_ssse3");
+ &call (&label("pic_point")); # make it PIC!
+ &set_label("pic_point");
+ &blindpop($tmp1);
+ &lea ($tmp1,&DWP(&label("K_XX_XX")."-".&label("pic_point"),$tmp1));
+&set_label("ssse3_shortcut");
+
+ &movdqa (@X[3],&QWP(0,$tmp1)); # K_00_19
+ &movdqa (@X[4],&QWP(16,$tmp1)); # K_20_39
+ &movdqa (@X[5],&QWP(32,$tmp1)); # K_40_59
+ &movdqa (@X[6],&QWP(48,$tmp1)); # K_60_79
+ &movdqa (@X[2],&QWP(64,$tmp1)); # pbswap mask
+
+ &mov ($E,&wparam(0)); # load argument block
+ &mov ($inp=@T[1],&wparam(1));
+ &mov ($D,&wparam(2));
+ &mov (@T[0],"esp");
+
+ # stack frame layout
+ #
+ # +0 X[0]+K X[1]+K X[2]+K X[3]+K # XMM->IALU xfer area
+ # X[4]+K X[5]+K X[6]+K X[7]+K
+ # X[8]+K X[9]+K X[10]+K X[11]+K
+ # X[12]+K X[13]+K X[14]+K X[15]+K
+ #
+ # +64 X[0] X[1] X[2] X[3] # XMM->XMM backtrace area
+ # X[4] X[5] X[6] X[7]
+ # X[8] X[9] X[10] X[11] # even borrowed for K_00_19
+ #
+ # +112 K_20_39 K_20_39 K_20_39 K_20_39 # constants
+ # K_40_59 K_40_59 K_40_59 K_40_59
+ # K_60_79 K_60_79 K_60_79 K_60_79
+ # K_00_19 K_00_19 K_00_19 K_00_19
+ # pbswap mask
+ #
+ # +192 ctx # argument block
+ # +196 inp
+ # +200 end
+ # +204 esp
+ &sub ("esp",208);
+ &and ("esp",-64);
+
+ &movdqa (&QWP(112+0,"esp"),@X[4]); # copy constants
+ &movdqa (&QWP(112+16,"esp"),@X[5]);
+ &movdqa (&QWP(112+32,"esp"),@X[6]);
+ &shl ($D,6); # len*64
+ &movdqa (&QWP(112+48,"esp"),@X[3]);
+ &add ($D,$inp); # end of input
+ &movdqa (&QWP(112+64,"esp"),@X[2]);
+ &add ($inp,64);
+ &mov (&DWP(192+0,"esp"),$E); # save argument block
+ &mov (&DWP(192+4,"esp"),$inp);
+ &mov (&DWP(192+8,"esp"),$D);
+ &mov (&DWP(192+12,"esp"),@T[0]); # save original %esp
+
+ &mov ($A,&DWP(0,$E)); # load context
+ &mov ($B,&DWP(4,$E));
+ &mov ($C,&DWP(8,$E));
+ &mov ($D,&DWP(12,$E));
+ &mov ($E,&DWP(16,$E));
+ &mov (@T[0],$B); # magic seed
+
+ &movdqu (@X[-4&7],&QWP(-64,$inp)); # load input to %xmm[0-3]
+ &movdqu (@X[-3&7],&QWP(-48,$inp));
+ &movdqu (@X[-2&7],&QWP(-32,$inp));
+ &movdqu (@X[-1&7],&QWP(-16,$inp));
+ &pshufb (@X[-4&7],@X[2]); # byte swap
+ &pshufb (@X[-3&7],@X[2]);
+ &pshufb (@X[-2&7],@X[2]);
+ &movdqa (&QWP(112-16,"esp"),@X[3]); # borrow last backtrace slot
+ &pshufb (@X[-1&7],@X[2]);
+ &paddd (@X[-4&7],@X[3]); # add K_00_19
+ &paddd (@X[-3&7],@X[3]);
+ &paddd (@X[-2&7],@X[3]);
+ &movdqa (&QWP(0,"esp"),@X[-4&7]); # X[]+K xfer to IALU
+ &psubd (@X[-4&7],@X[3]); # restore X[]
+ &movdqa (&QWP(0+16,"esp"),@X[-3&7]);
+ &psubd (@X[-3&7],@X[3]);
+ &movdqa (&QWP(0+32,"esp"),@X[-2&7]);
+ &psubd (@X[-2&7],@X[3]);
+ &movdqa (@X[0],@X[-3&7]);
+ &jmp (&label("loop"));
+
+######################################################################
+# SSE instruction sequence is first broken to groups of indepentent
+# instructions, independent in respect to their inputs and shifter
+# (not all architectures have more than one). Then IALU instructions
+# are "knitted in" between the SSE groups. Distance is maintained for
+# SSE latency of 2 in hope that it fits better upcoming AMD Bulldozer
+# [which allegedly also implements SSSE3]...
+#
+# Temporary registers usage. X[2] is volatile at the entry and at the
+# end is restored from backtrace ring buffer. X[3] is expected to
+# contain current K_XX_XX constant and is used to caclulate X[-1]+K
+# from previous round, it becomes volatile the moment the value is
+# saved to stack for transfer to IALU. X[4] becomes volatile whenever
+# X[-4] is accumulated and offloaded to backtrace ring buffer, at the
+# end it is loaded with next K_XX_XX [which becomes X[3] in next
+# round]...
+#
+sub Xupdate_ssse3_16_31() # recall that $Xi starts wtih 4
+{ use integer;
+ my $body = shift;
+ my @insns = (&$body,&$body,&$body,&$body); # 40 instructions
+ my ($a,$b,$c,$d,$e);
+
+ eval(shift(@insns));
+ eval(shift(@insns));
+ &palignr(@X[0],@X[-4&7],8); # compose "X[-14]" in "X[0]"
+ &movdqa (@X[2],@X[-1&7]);
+ eval(shift(@insns));
+ eval(shift(@insns));
+
+ &paddd (@X[3],@X[-1&7]);
+ &movdqa (&QWP(64+16*(($Xi-4)%3),"esp"),@X[-4&7]);# save X[] to backtrace buffer
+ eval(shift(@insns));
+ eval(shift(@insns));
+ &psrldq (@X[2],4); # "X[-3]", 3 dwords
+ eval(shift(@insns));
+ eval(shift(@insns));
+ &pxor (@X[0],@X[-4&7]); # "X[0]"^="X[-16]"
+ eval(shift(@insns));
+ eval(shift(@insns));
+
+ &pxor (@X[2],@X[-2&7]); # "X[-3]"^"X[-8]"
+ eval(shift(@insns));
+ eval(shift(@insns));
+ eval(shift(@insns));
+ eval(shift(@insns));
+
+ &pxor (@X[0],@X[2]); # "X[0]"^="X[-3]"^"X[-8]"
+ eval(shift(@insns));
+ eval(shift(@insns));
+ &movdqa (&QWP(0+16*(($Xi-1)&3),"esp"),@X[3]); # X[]+K xfer to IALU
+ eval(shift(@insns));
+ eval(shift(@insns));
+
+ &movdqa (@X[4],@X[0]);
+ &movdqa (@X[2],@X[0]);
+ eval(shift(@insns));
+ eval(shift(@insns));
+ eval(shift(@insns));
+ eval(shift(@insns));
+
+ &pslldq (@X[4],12); # "X[0]"<<96, extract one dword
+ &paddd (@X[0],@X[0]);
+ eval(shift(@insns));
+ eval(shift(@insns));
+ eval(shift(@insns));
+ eval(shift(@insns));
+
+ &psrld (@X[2],31);
+ eval(shift(@insns));
+ eval(shift(@insns));
+ &movdqa (@X[3],@X[4]);
+ eval(shift(@insns));
+ eval(shift(@insns));
+
+ &psrld (@X[4],30);
+ &por (@X[0],@X[2]); # "X[0]"<<<=1
+ eval(shift(@insns));
+ eval(shift(@insns));
+ &movdqa (@X[2],&QWP(64+16*(($Xi-6)%3),"esp")) if ($Xi>5); # restore X[] from backtrace buffer
+ eval(shift(@insns));
+ eval(shift(@insns));
+
+ &pslld (@X[3],2);
+ &pxor (@X[0],@X[4]);
+ eval(shift(@insns));
+ eval(shift(@insns));
+ &movdqa (@X[4],&QWP(112-16+16*(($Xi)/5),"esp")); # K_XX_XX
+ eval(shift(@insns));
+ eval(shift(@insns));
+
+ &pxor (@X[0],@X[3]); # "X[0]"^=("X[0]"<<96)<<<2
+ &movdqa (@X[1],@X[-2&7]) if ($Xi<7);
+ eval(shift(@insns));
+ eval(shift(@insns));
+
+ foreach (@insns) { eval; } # remaining instructions [if any]
+
+ $Xi++; push(@X,shift(@X)); # "rotate" X[]
+}
+
+sub Xupdate_ssse3_32_79()
+{ use integer;
+ my $body = shift;
+ my @insns = (&$body,&$body,&$body,&$body); # 32 to 48 instructions
+ my ($a,$b,$c,$d,$e);
+
+ &movdqa (@X[2],@X[-1&7]) if ($Xi==8);
+ eval(shift(@insns)); # body_20_39
+ &pxor (@X[0],@X[-4&7]); # "X[0]"="X[-32]"^"X[-16]"
+ &palignr(@X[2],@X[-2&7],8); # compose "X[-6]"
+ eval(shift(@insns));
+ eval(shift(@insns));
+ eval(shift(@insns)); # rol
+
+ &pxor (@X[0],@X[-7&7]); # "X[0]"^="X[-28]"
+ &movdqa (&QWP(64+16*(($Xi-4)%3),"esp"),@X[-4&7]); # save X[] to backtrace buffer
+ eval(shift(@insns));
+ eval(shift(@insns));
+ if ($Xi%5) {
+ &movdqa (@X[4],@X[3]); # "perpetuate" K_XX_XX...
+ } else { # ... or load next one
+ &movdqa (@X[4],&QWP(112-16+16*($Xi/5),"esp"));
+ }
+ &paddd (@X[3],@X[-1&7]);
+ eval(shift(@insns)); # ror
+ eval(shift(@insns));
+
+ &pxor (@X[0],@X[2]); # "X[0]"^="X[-6]"
+ eval(shift(@insns)); # body_20_39
+ eval(shift(@insns));
+ eval(shift(@insns));
+ eval(shift(@insns)); # rol
+
+ &movdqa (@X[2],@X[0]);
+ &movdqa (&QWP(0+16*(($Xi-1)&3),"esp"),@X[3]); # X[]+K xfer to IALU
+ eval(shift(@insns));
+ eval(shift(@insns));
+ eval(shift(@insns)); # ror
+ eval(shift(@insns));
+
+ &pslld (@X[0],2);
+ eval(shift(@insns)); # body_20_39
+ eval(shift(@insns));
+ &psrld (@X[2],30);
+ eval(shift(@insns));
+ eval(shift(@insns)); # rol
+ eval(shift(@insns));
+ eval(shift(@insns));
+ eval(shift(@insns)); # ror
+ eval(shift(@insns));
+
+ &por (@X[0],@X[2]); # "X[0]"<<<=2
+ eval(shift(@insns)); # body_20_39
+ eval(shift(@insns));
+ &movdqa (@X[2],&QWP(64+16*(($Xi-6)%3),"esp")) if($Xi<19); # restore X[] from backtrace buffer
+ eval(shift(@insns));
+ eval(shift(@insns)); # rol
+ eval(shift(@insns));
+ eval(shift(@insns));
+ eval(shift(@insns)); # ror
+ &movdqa (@X[3],@X[0]) if ($Xi<19);
+ eval(shift(@insns));
+
+ foreach (@insns) { eval; } # remaining instructions
+
+ $Xi++; push(@X,shift(@X)); # "rotate" X[]
+}
+
+sub Xuplast_ssse3_80()
+{ use integer;
+ my $body = shift;
+ my @insns = (&$body,&$body,&$body,&$body); # 32 instructions
+ my ($a,$b,$c,$d,$e);
+
+ eval(shift(@insns));
+ &paddd (@X[3],@X[-1&7]);
+ eval(shift(@insns));
+ eval(shift(@insns));
+ eval(shift(@insns));
+ eval(shift(@insns));
+
+ &movdqa (&QWP(0+16*(($Xi-1)&3),"esp"),@X[3]); # X[]+K xfer IALU
+
+ foreach (@insns) { eval; } # remaining instructions
+
+ &mov ($inp=@T[1],&DWP(192+4,"esp"));
+ &cmp ($inp,&DWP(192+8,"esp"));
+ &je (&label("done"));
+
+ &movdqa (@X[3],&QWP(112+48,"esp")); # K_00_19
+ &movdqa (@X[2],&QWP(112+64,"esp")); # pbswap mask
+ &movdqu (@X[-4&7],&QWP(0,$inp)); # load input
+ &movdqu (@X[-3&7],&QWP(16,$inp));
+ &movdqu (@X[-2&7],&QWP(32,$inp));
+ &movdqu (@X[-1&7],&QWP(48,$inp));
+ &add ($inp,64);
+ &pshufb (@X[-4&7],@X[2]); # byte swap
+ &mov (&DWP(192+4,"esp"),$inp);
+ &movdqa (&QWP(112-16,"esp"),@X[3]); # borrow last backtrace slot
+
+ $Xi=0;
+}
+
+sub Xloop_ssse3()
+{ use integer;
+ my $body = shift;
+ my @insns = (&$body,&$body,&$body,&$body); # 32 instructions
+ my ($a,$b,$c,$d,$e);
+
+ eval(shift(@insns));
+ eval(shift(@insns));
+ &pshufb (@X[($Xi-3)&7],@X[2]);
+ eval(shift(@insns));
+ eval(shift(@insns));
+ &paddd (@X[($Xi-4)&7],@X[3]);
+ eval(shift(@insns));
+ eval(shift(@insns));
+ eval(shift(@insns));
+ eval(shift(@insns));
+ &movdqa (&QWP(0+16*$Xi,"esp"),@X[($Xi-4)&7]); # X[]+K xfer to IALU
+ eval(shift(@insns));
+ eval(shift(@insns));
+ &psubd (@X[($Xi-4)&7],@X[3]);
+
+ foreach (@insns) { eval; }
+ $Xi++;
+}
+
+sub Xtail_ssse3()
+{ use integer;
+ my $body = shift;
+ my @insns = (&$body,&$body,&$body,&$body); # 32 instructions
+ my ($a,$b,$c,$d,$e);
+
+ foreach (@insns) { eval; }
+}
+
+sub body_00_19 () {
+ (
+ '($a,$b,$c,$d,$e)=@V;'.
+ '&add ($e,&DWP(4*($j&15),"esp"));', # X[]+K xfer
+ '&xor ($c,$d);',
+ '&mov (@T[1],$a);', # $b in next round
+ '&$_rol ($a,5);',
+ '&and (@T[0],$c);', # ($b&($c^$d))
+ '&xor ($c,$d);', # restore $c
+ '&xor (@T[0],$d);',
+ '&add ($e,$a);',
+ '&$_ror ($b,$j?7:2);', # $b>>>2
+ '&add ($e,@T[0]);' .'$j++; unshift(@V,pop(@V)); unshift(@T,pop(@T));'
+ );
+}
+
+sub body_20_39 () {
+ (
+ '($a,$b,$c,$d,$e)=@V;'.
+ '&add ($e,&DWP(4*($j++&15),"esp"));', # X[]+K xfer
+ '&xor (@T[0],$d);', # ($b^$d)
+ '&mov (@T[1],$a);', # $b in next round
+ '&$_rol ($a,5);',
+ '&xor (@T[0],$c);', # ($b^$d^$c)
+ '&add ($e,$a);',
+ '&$_ror ($b,7);', # $b>>>2
+ '&add ($e,@T[0]);' .'unshift(@V,pop(@V)); unshift(@T,pop(@T));'
+ );
+}
+
+sub body_40_59 () {
+ (
+ '($a,$b,$c,$d,$e)=@V;'.
+ '&mov (@T[1],$c);',
+ '&xor ($c,$d);',
+ '&add ($e,&DWP(4*($j++&15),"esp"));', # X[]+K xfer
+ '&and (@T[1],$d);',
+ '&and (@T[0],$c);', # ($b&($c^$d))
+ '&$_ror ($b,7);', # $b>>>2
+ '&add ($e,@T[1]);',
+ '&mov (@T[1],$a);', # $b in next round
+ '&$_rol ($a,5);',
+ '&add ($e,@T[0]);',
+ '&xor ($c,$d);', # restore $c
+ '&add ($e,$a);' .'unshift(@V,pop(@V)); unshift(@T,pop(@T));'
+ );
+}
+
+&set_label("loop",16);
+ &Xupdate_ssse3_16_31(\&body_00_19);
+ &Xupdate_ssse3_16_31(\&body_00_19);
+ &Xupdate_ssse3_16_31(\&body_00_19);
+ &Xupdate_ssse3_16_31(\&body_00_19);
+ &Xupdate_ssse3_32_79(\&body_00_19);
+ &Xupdate_ssse3_32_79(\&body_20_39);
+ &Xupdate_ssse3_32_79(\&body_20_39);
+ &Xupdate_ssse3_32_79(\&body_20_39);
+ &Xupdate_ssse3_32_79(\&body_20_39);
+ &Xupdate_ssse3_32_79(\&body_20_39);
+ &Xupdate_ssse3_32_79(\&body_40_59);
+ &Xupdate_ssse3_32_79(\&body_40_59);
+ &Xupdate_ssse3_32_79(\&body_40_59);
+ &Xupdate_ssse3_32_79(\&body_40_59);
+ &Xupdate_ssse3_32_79(\&body_40_59);
+ &Xupdate_ssse3_32_79(\&body_20_39);
+ &Xuplast_ssse3_80(\&body_20_39); # can jump to "done"
+
+ $saved_j=$j; @saved_V=@V;
+
+ &Xloop_ssse3(\&body_20_39);
+ &Xloop_ssse3(\&body_20_39);
+ &Xloop_ssse3(\&body_20_39);
+
+ &mov (@T[1],&DWP(192,"esp")); # update context
+ &add ($A,&DWP(0,@T[1]));
+ &add (@T[0],&DWP(4,@T[1])); # $b
+ &add ($C,&DWP(8,@T[1]));
+ &mov (&DWP(0,@T[1]),$A);
+ &add ($D,&DWP(12,@T[1]));
+ &mov (&DWP(4,@T[1]),@T[0]);
+ &add ($E,&DWP(16,@T[1]));
+ &mov (&DWP(8,@T[1]),$C);
+ &mov ($B,@T[0]);
+ &mov (&DWP(12,@T[1]),$D);
+ &mov (&DWP(16,@T[1]),$E);
+ &movdqa (@X[0],@X[-3&7]);
+
+ &jmp (&label("loop"));
+
+&set_label("done",16); $j=$saved_j; @V=@saved_V;
+
+ &Xtail_ssse3(\&body_20_39);
+ &Xtail_ssse3(\&body_20_39);
+ &Xtail_ssse3(\&body_20_39);
+
+ &mov (@T[1],&DWP(192,"esp")); # update context
+ &add ($A,&DWP(0,@T[1]));
+ &mov ("esp",&DWP(192+12,"esp")); # restore %esp
+ &add (@T[0],&DWP(4,@T[1])); # $b
+ &add ($C,&DWP(8,@T[1]));
+ &mov (&DWP(0,@T[1]),$A);
+ &add ($D,&DWP(12,@T[1]));
+ &mov (&DWP(4,@T[1]),@T[0]);
+ &add ($E,&DWP(16,@T[1]));
+ &mov (&DWP(8,@T[1]),$C);
+ &mov (&DWP(12,@T[1]),$D);
+ &mov (&DWP(16,@T[1]),$E);
+
+&function_end("_sha1_block_data_order_ssse3");
+
+if ($ymm) {
+my $Xi=4; # 4xSIMD Xupdate round, start pre-seeded
+my @X=map("xmm$_",(4..7,0..3)); # pre-seeded for $Xi=4
+my @V=($A,$B,$C,$D,$E);
+my $j=0; # hash round
+my @T=($T,$tmp1);
+my $inp;
+
+my $_rol=sub { &shld(@_[0],@_) };
+my $_ror=sub { &shrd(@_[0],@_) };
+
+&function_begin("_sha1_block_data_order_avx");
+ &call (&label("pic_point")); # make it PIC!
+ &set_label("pic_point");
+ &blindpop($tmp1);
+ &lea ($tmp1,&DWP(&label("K_XX_XX")."-".&label("pic_point"),$tmp1));
+&set_label("avx_shortcut");
+ &vzeroall();
+
+ &vmovdqa(@X[3],&QWP(0,$tmp1)); # K_00_19
+ &vmovdqa(@X[4],&QWP(16,$tmp1)); # K_20_39
+ &vmovdqa(@X[5],&QWP(32,$tmp1)); # K_40_59
+ &vmovdqa(@X[6],&QWP(48,$tmp1)); # K_60_79
+ &vmovdqa(@X[2],&QWP(64,$tmp1)); # pbswap mask
+
+ &mov ($E,&wparam(0)); # load argument block
+ &mov ($inp=@T[1],&wparam(1));
+ &mov ($D,&wparam(2));
+ &mov (@T[0],"esp");
+
+ # stack frame layout
+ #
+ # +0 X[0]+K X[1]+K X[2]+K X[3]+K # XMM->IALU xfer area
+ # X[4]+K X[5]+K X[6]+K X[7]+K
+ # X[8]+K X[9]+K X[10]+K X[11]+K
+ # X[12]+K X[13]+K X[14]+K X[15]+K
+ #
+ # +64 X[0] X[1] X[2] X[3] # XMM->XMM backtrace area
+ # X[4] X[5] X[6] X[7]
+ # X[8] X[9] X[10] X[11] # even borrowed for K_00_19
+ #
+ # +112 K_20_39 K_20_39 K_20_39 K_20_39 # constants
+ # K_40_59 K_40_59 K_40_59 K_40_59
+ # K_60_79 K_60_79 K_60_79 K_60_79
+ # K_00_19 K_00_19 K_00_19 K_00_19
+ # pbswap mask
+ #
+ # +192 ctx # argument block
+ # +196 inp
+ # +200 end
+ # +204 esp
+ &sub ("esp",208);
+ &and ("esp",-64);
+
+ &vmovdqa(&QWP(112+0,"esp"),@X[4]); # copy constants
+ &vmovdqa(&QWP(112+16,"esp"),@X[5]);
+ &vmovdqa(&QWP(112+32,"esp"),@X[6]);
+ &shl ($D,6); # len*64
+ &vmovdqa(&QWP(112+48,"esp"),@X[3]);
+ &add ($D,$inp); # end of input
+ &vmovdqa(&QWP(112+64,"esp"),@X[2]);
+ &add ($inp,64);
+ &mov (&DWP(192+0,"esp"),$E); # save argument block
+ &mov (&DWP(192+4,"esp"),$inp);
+ &mov (&DWP(192+8,"esp"),$D);
+ &mov (&DWP(192+12,"esp"),@T[0]); # save original %esp
+
+ &mov ($A,&DWP(0,$E)); # load context
+ &mov ($B,&DWP(4,$E));
+ &mov ($C,&DWP(8,$E));
+ &mov ($D,&DWP(12,$E));
+ &mov ($E,&DWP(16,$E));
+ &mov (@T[0],$B); # magic seed
+
+ &vmovdqu(@X[-4&7],&QWP(-64,$inp)); # load input to %xmm[0-3]
+ &vmovdqu(@X[-3&7],&QWP(-48,$inp));
+ &vmovdqu(@X[-2&7],&QWP(-32,$inp));
+ &vmovdqu(@X[-1&7],&QWP(-16,$inp));
+ &vpshufb(@X[-4&7],@X[-4&7],@X[2]); # byte swap
+ &vpshufb(@X[-3&7],@X[-3&7],@X[2]);
+ &vpshufb(@X[-2&7],@X[-2&7],@X[2]);
+ &vmovdqa(&QWP(112-16,"esp"),@X[3]); # borrow last backtrace slot
+ &vpshufb(@X[-1&7],@X[-1&7],@X[2]);
+ &vpaddd (@X[0],@X[-4&7],@X[3]); # add K_00_19
+ &vpaddd (@X[1],@X[-3&7],@X[3]);
+ &vpaddd (@X[2],@X[-2&7],@X[3]);
+ &vmovdqa(&QWP(0,"esp"),@X[0]); # X[]+K xfer to IALU
+ &vmovdqa(&QWP(0+16,"esp"),@X[1]);
+ &vmovdqa(&QWP(0+32,"esp"),@X[2]);
+ &jmp (&label("loop"));
+
+sub Xupdate_avx_16_31() # recall that $Xi starts wtih 4
+{ use integer;
+ my $body = shift;
+ my @insns = (&$body,&$body,&$body,&$body); # 40 instructions
+ my ($a,$b,$c,$d,$e);
+
+ eval(shift(@insns));
+ eval(shift(@insns));
+ &vpalignr(@X[0],@X[-3&7],@X[-4&7],8); # compose "X[-14]" in "X[0]"
+ eval(shift(@insns));
+ eval(shift(@insns));
+
+ &vpaddd (@X[3],@X[3],@X[-1&7]);
+ &vmovdqa (&QWP(64+16*(($Xi-4)%3),"esp"),@X[-4&7]);# save X[] to backtrace buffer
+ eval(shift(@insns));
+ eval(shift(@insns));
+ &vpsrldq(@X[2],@X[-1&7],4); # "X[-3]", 3 dwords
+ eval(shift(@insns));
+ eval(shift(@insns));
+ &vpxor (@X[0],@X[0],@X[-4&7]); # "X[0]"^="X[-16]"
+ eval(shift(@insns));
+ eval(shift(@insns));
+
+ &vpxor (@X[2],@X[2],@X[-2&7]); # "X[-3]"^"X[-8]"
+ eval(shift(@insns));
+ eval(shift(@insns));
+ &vmovdqa (&QWP(0+16*(($Xi-1)&3),"esp"),@X[3]); # X[]+K xfer to IALU
+ eval(shift(@insns));
+ eval(shift(@insns));
+
+ &vpxor (@X[0],@X[0],@X[2]); # "X[0]"^="X[-3]"^"X[-8]"
+ eval(shift(@insns));
+ eval(shift(@insns));
+ eval(shift(@insns));
+ eval(shift(@insns));
+
+ &vpsrld (@X[2],@X[0],31);
+ eval(shift(@insns));
+ eval(shift(@insns));
+ eval(shift(@insns));
+ eval(shift(@insns));
+
+ &vpslldq(@X[4],@X[0],12); # "X[0]"<<96, extract one dword
+ &vpaddd (@X[0],@X[0],@X[0]);
+ eval(shift(@insns));
+ eval(shift(@insns));
+ eval(shift(@insns));
+ eval(shift(@insns));
+
+ &vpsrld (@X[3],@X[4],30);
+ &vpor (@X[0],@X[0],@X[2]); # "X[0]"<<<=1
+ eval(shift(@insns));
+ eval(shift(@insns));
+ eval(shift(@insns));
+ eval(shift(@insns));
+
+ &vpslld (@X[4],@X[4],2);
+ &vmovdqa (@X[2],&QWP(64+16*(($Xi-6)%3),"esp")) if ($Xi>5); # restore X[] from backtrace buffer
+ eval(shift(@insns));
+ eval(shift(@insns));
+ &vpxor (@X[0],@X[0],@X[3]);
+ eval(shift(@insns));
+ eval(shift(@insns));
+ eval(shift(@insns));
+ eval(shift(@insns));
+
+ &vpxor (@X[0],@X[0],@X[4]); # "X[0]"^=("X[0]"<<96)<<<2
+ eval(shift(@insns));
+ eval(shift(@insns));
+ &vmovdqa (@X[4],&QWP(112-16+16*(($Xi)/5),"esp")); # K_XX_XX
+ eval(shift(@insns));
+ eval(shift(@insns));
+
+ foreach (@insns) { eval; } # remaining instructions [if any]
+
+ $Xi++; push(@X,shift(@X)); # "rotate" X[]
+}
+
+sub Xupdate_avx_32_79()
+{ use integer;
+ my $body = shift;
+ my @insns = (&$body,&$body,&$body,&$body); # 32 to 48 instructions
+ my ($a,$b,$c,$d,$e);
+
+ &vpalignr(@X[2],@X[-1&7],@X[-2&7],8); # compose "X[-6]"
+ &vpxor (@X[0],@X[0],@X[-4&7]); # "X[0]"="X[-32]"^"X[-16]"
+ eval(shift(@insns)); # body_20_39
+ eval(shift(@insns));
+ eval(shift(@insns));
+ eval(shift(@insns)); # rol
+
+ &vpxor (@X[0],@X[0],@X[-7&7]); # "X[0]"^="X[-28]"
+ &vmovdqa (&QWP(64+16*(($Xi-4)%3),"esp"),@X[-4&7]); # save X[] to backtrace buffer
+ eval(shift(@insns));
+ eval(shift(@insns));
+ if ($Xi%5) {
+ &vmovdqa (@X[4],@X[3]); # "perpetuate" K_XX_XX...
+ } else { # ... or load next one
+ &vmovdqa (@X[4],&QWP(112-16+16*($Xi/5),"esp"));
+ }
+ &vpaddd (@X[3],@X[3],@X[-1&7]);
+ eval(shift(@insns)); # ror
+ eval(shift(@insns));
+
+ &vpxor (@X[0],@X[0],@X[2]); # "X[0]"^="X[-6]"
+ eval(shift(@insns)); # body_20_39
+ eval(shift(@insns));
+ eval(shift(@insns));
+ eval(shift(@insns)); # rol
+
+ &vpsrld (@X[2],@X[0],30);
+ &vmovdqa (&QWP(0+16*(($Xi-1)&3),"esp"),@X[3]); # X[]+K xfer to IALU
+ eval(shift(@insns));
+ eval(shift(@insns));
+ eval(shift(@insns)); # ror
+ eval(shift(@insns));
+
+ &vpslld (@X[0],@X[0],2);
+ eval(shift(@insns)); # body_20_39
+ eval(shift(@insns));
+ eval(shift(@insns));
+ eval(shift(@insns)); # rol
+ eval(shift(@insns));
+ eval(shift(@insns));
+ eval(shift(@insns)); # ror
+ eval(shift(@insns));
+
+ &vpor (@X[0],@X[0],@X[2]); # "X[0]"<<<=2
+ eval(shift(@insns)); # body_20_39
+ eval(shift(@insns));
+ &vmovdqa (@X[2],&QWP(64+16*(($Xi-6)%3),"esp")) if($Xi<19); # restore X[] from backtrace buffer
+ eval(shift(@insns));
+ eval(shift(@insns)); # rol
+ eval(shift(@insns));
+ eval(shift(@insns));
+ eval(shift(@insns)); # ror
+ eval(shift(@insns));
+
+ foreach (@insns) { eval; } # remaining instructions
+
+ $Xi++; push(@X,shift(@X)); # "rotate" X[]
+}
+
+sub Xuplast_avx_80()
+{ use integer;
+ my $body = shift;
+ my @insns = (&$body,&$body,&$body,&$body); # 32 instructions
+ my ($a,$b,$c,$d,$e);
+
+ eval(shift(@insns));
+ &vpaddd (@X[3],@X[3],@X[-1&7]);
+ eval(shift(@insns));
+ eval(shift(@insns));
+ eval(shift(@insns));
+ eval(shift(@insns));
+
+ &vmovdqa (&QWP(0+16*(($Xi-1)&3),"esp"),@X[3]); # X[]+K xfer IALU
+
+ foreach (@insns) { eval; } # remaining instructions
+
+ &mov ($inp=@T[1],&DWP(192+4,"esp"));
+ &cmp ($inp,&DWP(192+8,"esp"));
+ &je (&label("done"));
+
+ &vmovdqa(@X[3],&QWP(112+48,"esp")); # K_00_19
+ &vmovdqa(@X[2],&QWP(112+64,"esp")); # pbswap mask
+ &vmovdqu(@X[-4&7],&QWP(0,$inp)); # load input
+ &vmovdqu(@X[-3&7],&QWP(16,$inp));
+ &vmovdqu(@X[-2&7],&QWP(32,$inp));
+ &vmovdqu(@X[-1&7],&QWP(48,$inp));
+ &add ($inp,64);
+ &vpshufb(@X[-4&7],@X[-4&7],@X[2]); # byte swap
+ &mov (&DWP(192+4,"esp"),$inp);
+ &vmovdqa(&QWP(112-16,"esp"),@X[3]); # borrow last backtrace slot
+
+ $Xi=0;
+}
+
+sub Xloop_avx()
+{ use integer;
+ my $body = shift;
+ my @insns = (&$body,&$body,&$body,&$body); # 32 instructions
+ my ($a,$b,$c,$d,$e);
+
+ eval(shift(@insns));
+ eval(shift(@insns));
+ &vpshufb (@X[($Xi-3)&7],@X[($Xi-3)&7],@X[2]);
+ eval(shift(@insns));
+ eval(shift(@insns));
+ &vpaddd (@X[$Xi&7],@X[($Xi-4)&7],@X[3]);
+ eval(shift(@insns));
+ eval(shift(@insns));
+ eval(shift(@insns));
+ eval(shift(@insns));
+ &vmovdqa (&QWP(0+16*$Xi,"esp"),@X[$Xi&7]); # X[]+K xfer to IALU
+ eval(shift(@insns));
+ eval(shift(@insns));
+
+ foreach (@insns) { eval; }
+ $Xi++;
+}
+
+sub Xtail_avx()
+{ use integer;
+ my $body = shift;
+ my @insns = (&$body,&$body,&$body,&$body); # 32 instructions
+ my ($a,$b,$c,$d,$e);
+
+ foreach (@insns) { eval; }
+}
+
+&set_label("loop",16);
+ &Xupdate_avx_16_31(\&body_00_19);
+ &Xupdate_avx_16_31(\&body_00_19);
+ &Xupdate_avx_16_31(\&body_00_19);
+ &Xupdate_avx_16_31(\&body_00_19);
+ &Xupdate_avx_32_79(\&body_00_19);
+ &Xupdate_avx_32_79(\&body_20_39);
+ &Xupdate_avx_32_79(\&body_20_39);
+ &Xupdate_avx_32_79(\&body_20_39);
+ &Xupdate_avx_32_79(\&body_20_39);
+ &Xupdate_avx_32_79(\&body_20_39);
+ &Xupdate_avx_32_79(\&body_40_59);
+ &Xupdate_avx_32_79(\&body_40_59);
+ &Xupdate_avx_32_79(\&body_40_59);
+ &Xupdate_avx_32_79(\&body_40_59);
+ &Xupdate_avx_32_79(\&body_40_59);
+ &Xupdate_avx_32_79(\&body_20_39);
+ &Xuplast_avx_80(\&body_20_39); # can jump to "done"
+
+ $saved_j=$j; @saved_V=@V;
+
+ &Xloop_avx(\&body_20_39);
+ &Xloop_avx(\&body_20_39);
+ &Xloop_avx(\&body_20_39);
+
+ &mov (@T[1],&DWP(192,"esp")); # update context
+ &add ($A,&DWP(0,@T[1]));
+ &add (@T[0],&DWP(4,@T[1])); # $b
+ &add ($C,&DWP(8,@T[1]));
+ &mov (&DWP(0,@T[1]),$A);
+ &add ($D,&DWP(12,@T[1]));
+ &mov (&DWP(4,@T[1]),@T[0]);
+ &add ($E,&DWP(16,@T[1]));
+ &mov (&DWP(8,@T[1]),$C);
+ &mov ($B,@T[0]);
+ &mov (&DWP(12,@T[1]),$D);
+ &mov (&DWP(16,@T[1]),$E);
+
+ &jmp (&label("loop"));
+
+&set_label("done",16); $j=$saved_j; @V=@saved_V;
+
+ &Xtail_avx(\&body_20_39);
+ &Xtail_avx(\&body_20_39);
+ &Xtail_avx(\&body_20_39);
+
+ &vzeroall();
+
+ &mov (@T[1],&DWP(192,"esp")); # update context
+ &add ($A,&DWP(0,@T[1]));
+ &mov ("esp",&DWP(192+12,"esp")); # restore %esp
+ &add (@T[0],&DWP(4,@T[1])); # $b
+ &add ($C,&DWP(8,@T[1]));
+ &mov (&DWP(0,@T[1]),$A);
+ &add ($D,&DWP(12,@T[1]));
+ &mov (&DWP(4,@T[1]),@T[0]);
+ &add ($E,&DWP(16,@T[1]));
+ &mov (&DWP(8,@T[1]),$C);
+ &mov (&DWP(12,@T[1]),$D);
+ &mov (&DWP(16,@T[1]),$E);
+&function_end("_sha1_block_data_order_avx");
+}
+&set_label("K_XX_XX",64);
+&data_word(0x5a827999,0x5a827999,0x5a827999,0x5a827999); # K_00_19
+&data_word(0x6ed9eba1,0x6ed9eba1,0x6ed9eba1,0x6ed9eba1); # K_20_39
+&data_word(0x8f1bbcdc,0x8f1bbcdc,0x8f1bbcdc,0x8f1bbcdc); # K_40_59
+&data_word(0xca62c1d6,0xca62c1d6,0xca62c1d6,0xca62c1d6); # K_60_79
+&data_word(0x00010203,0x04050607,0x08090a0b,0x0c0d0e0f); # pbswap mask
+}
&asciz("SHA1 block transform for x86, CRYPTOGAMS by <appro\@openssl.org>");
&asm_finish();
diff --git a/openssl/crypto/sha/asm/sha1-alpha.pl b/openssl/crypto/sha/asm/sha1-alpha.pl
new file mode 100644
index 000000000..6c4b9251f
--- /dev/null
+++ b/openssl/crypto/sha/asm/sha1-alpha.pl
@@ -0,0 +1,322 @@
+#!/usr/bin/env perl
+
+# ====================================================================
+# Written by Andy Polyakov <appro@fy.chalmers.se> for the OpenSSL
+# project. The module is, however, dual licensed under OpenSSL and
+# CRYPTOGAMS licenses depending on where you obtain it. For further
+# details see http://www.openssl.org/~appro/cryptogams/.
+# ====================================================================
+
+# SHA1 block procedure for Alpha.
+
+# On 21264 performance is 33% better than code generated by vendor
+# compiler, and 75% better than GCC [3.4], and in absolute terms is
+# 8.7 cycles per processed byte. Implementation features vectorized
+# byte swap, but not Xupdate.
+
+@X=( "\$0", "\$1", "\$2", "\$3", "\$4", "\$5", "\$6", "\$7",
+ "\$8", "\$9", "\$10", "\$11", "\$12", "\$13", "\$14", "\$15");
+$ctx="a0"; # $16
+$inp="a1";
+$num="a2";
+$A="a3";
+$B="a4"; # 20
+$C="a5";
+$D="t8";
+$E="t9"; @V=($A,$B,$C,$D,$E);
+$t0="t10"; # 24
+$t1="t11";
+$t2="ra";
+$t3="t12";
+$K="AT"; # 28
+
+sub BODY_00_19 {
+my ($i,$a,$b,$c,$d,$e)=@_;
+my $j=$i+1;
+$code.=<<___ if ($i==0);
+ ldq_u @X[0],0+0($inp)
+ ldq_u @X[1],0+7($inp)
+___
+$code.=<<___ if (!($i&1) && $i<14);
+ ldq_u @X[$i+2],($i+2)*4+0($inp)
+ ldq_u @X[$i+3],($i+2)*4+7($inp)
+___
+$code.=<<___ if (!($i&1) && $i<15);
+ extql @X[$i],$inp,@X[$i]
+ extqh @X[$i+1],$inp,@X[$i+1]
+
+ or @X[$i+1],@X[$i],@X[$i] # pair of 32-bit values are fetched
+
+ srl @X[$i],24,$t0 # vectorized byte swap
+ srl @X[$i],8,$t2
+
+ sll @X[$i],8,$t3
+ sll @X[$i],24,@X[$i]
+ zapnot $t0,0x11,$t0
+ zapnot $t2,0x22,$t2
+
+ zapnot @X[$i],0x88,@X[$i]
+ or $t0,$t2,$t0
+ zapnot $t3,0x44,$t3
+ sll $a,5,$t1
+
+ or @X[$i],$t0,@X[$i]
+ addl $K,$e,$e
+ and $b,$c,$t2
+ zapnot $a,0xf,$a
+
+ or @X[$i],$t3,@X[$i]
+ srl $a,27,$t0
+ bic $d,$b,$t3
+ sll $b,30,$b
+
+ extll @X[$i],4,@X[$i+1] # extract upper half
+ or $t2,$t3,$t2
+ addl @X[$i],$e,$e
+
+ addl $t1,$e,$e
+ srl $b,32,$t3
+ zapnot @X[$i],0xf,@X[$i]
+
+ addl $t0,$e,$e
+ addl $t2,$e,$e
+ or $t3,$b,$b
+___
+$code.=<<___ if (($i&1) && $i<15);
+ sll $a,5,$t1
+ addl $K,$e,$e
+ and $b,$c,$t2
+ zapnot $a,0xf,$a
+
+ srl $a,27,$t0
+ addl @X[$i%16],$e,$e
+ bic $d,$b,$t3
+ sll $b,30,$b
+
+ or $t2,$t3,$t2
+ addl $t1,$e,$e
+ srl $b,32,$t3
+ zapnot @X[$i],0xf,@X[$i]
+
+ addl $t0,$e,$e
+ addl $t2,$e,$e
+ or $t3,$b,$b
+___
+$code.=<<___ if ($i>=15); # with forward Xupdate
+ sll $a,5,$t1
+ addl $K,$e,$e
+ and $b,$c,$t2
+ xor @X[($j+2)%16],@X[$j%16],@X[$j%16]
+
+ zapnot $a,0xf,$a
+ addl @X[$i%16],$e,$e
+ bic $d,$b,$t3
+ xor @X[($j+8)%16],@X[$j%16],@X[$j%16]
+
+ srl $a,27,$t0
+ addl $t1,$e,$e
+ or $t2,$t3,$t2
+ xor @X[($j+13)%16],@X[$j%16],@X[$j%16]
+
+ sll $b,30,$b
+ addl $t0,$e,$e
+ srl @X[$j%16],31,$t1
+
+ addl $t2,$e,$e
+ srl $b,32,$t3
+ addl @X[$j%16],@X[$j%16],@X[$j%16]
+
+ or $t3,$b,$b
+ zapnot @X[$i%16],0xf,@X[$i%16]
+ or $t1,@X[$j%16],@X[$j%16]
+___
+}
+
+sub BODY_20_39 {
+my ($i,$a,$b,$c,$d,$e)=@_;
+my $j=$i+1;
+$code.=<<___ if ($i<79); # with forward Xupdate
+ sll $a,5,$t1
+ addl $K,$e,$e
+ zapnot $a,0xf,$a
+ xor @X[($j+2)%16],@X[$j%16],@X[$j%16]
+
+ sll $b,30,$t3
+ addl $t1,$e,$e
+ xor $b,$c,$t2
+ xor @X[($j+8)%16],@X[$j%16],@X[$j%16]
+
+ srl $b,2,$b
+ addl @X[$i%16],$e,$e
+ xor $d,$t2,$t2
+ xor @X[($j+13)%16],@X[$j%16],@X[$j%16]
+
+ srl @X[$j%16],31,$t1
+ addl $t2,$e,$e
+ srl $a,27,$t0
+ addl @X[$j%16],@X[$j%16],@X[$j%16]
+
+ or $t3,$b,$b
+ addl $t0,$e,$e
+ or $t1,@X[$j%16],@X[$j%16]
+___
+$code.=<<___ if ($i<77);
+ zapnot @X[$i%16],0xf,@X[$i%16]
+___
+$code.=<<___ if ($i==79); # with context fetch
+ sll $a,5,$t1
+ addl $K,$e,$e
+ zapnot $a,0xf,$a
+ ldl @X[0],0($ctx)
+
+ sll $b,30,$t3
+ addl $t1,$e,$e
+ xor $b,$c,$t2
+ ldl @X[1],4($ctx)
+
+ srl $b,2,$b
+ addl @X[$i%16],$e,$e
+ xor $d,$t2,$t2
+ ldl @X[2],8($ctx)
+
+ srl $a,27,$t0
+ addl $t2,$e,$e
+ ldl @X[3],12($ctx)
+
+ or $t3,$b,$b
+ addl $t0,$e,$e
+ ldl @X[4],16($ctx)
+___
+}
+
+sub BODY_40_59 {
+my ($i,$a,$b,$c,$d,$e)=@_;
+my $j=$i+1;
+$code.=<<___; # with forward Xupdate
+ sll $a,5,$t1
+ addl $K,$e,$e
+ zapnot $a,0xf,$a
+ xor @X[($j+2)%16],@X[$j%16],@X[$j%16]
+
+ srl $a,27,$t0
+ and $b,$c,$t2
+ and $b,$d,$t3
+ xor @X[($j+8)%16],@X[$j%16],@X[$j%16]
+
+ sll $b,30,$b
+ addl $t1,$e,$e
+ xor @X[($j+13)%16],@X[$j%16],@X[$j%16]
+
+ srl @X[$j%16],31,$t1
+ addl $t0,$e,$e
+ or $t2,$t3,$t2
+ and $c,$d,$t3
+
+ or $t2,$t3,$t2
+ srl $b,32,$t3
+ addl @X[$i%16],$e,$e
+ addl @X[$j%16],@X[$j%16],@X[$j%16]
+
+ or $t3,$b,$b
+ addl $t2,$e,$e
+ or $t1,@X[$j%16],@X[$j%16]
+ zapnot @X[$i%16],0xf,@X[$i%16]
+___
+}
+
+$code=<<___;
+#ifdef __linux__
+#include <asm/regdef.h>
+#else
+#include <asm.h>
+#include <regdef.h>
+#endif
+
+.text
+
+.set noat
+.set noreorder
+.globl sha1_block_data_order
+.align 5
+.ent sha1_block_data_order
+sha1_block_data_order:
+ lda sp,-64(sp)
+ stq ra,0(sp)
+ stq s0,8(sp)
+ stq s1,16(sp)
+ stq s2,24(sp)
+ stq s3,32(sp)
+ stq s4,40(sp)
+ stq s5,48(sp)
+ stq fp,56(sp)
+ .mask 0x0400fe00,-64
+ .frame sp,64,ra
+ .prologue 0
+
+ ldl $A,0($ctx)
+ ldl $B,4($ctx)
+ sll $num,6,$num
+ ldl $C,8($ctx)
+ ldl $D,12($ctx)
+ ldl $E,16($ctx)
+ addq $inp,$num,$num
+
+.Lloop:
+ .set noreorder
+ ldah $K,23170(zero)
+ zapnot $B,0xf,$B
+ lda $K,31129($K) # K_00_19
+___
+for ($i=0;$i<20;$i++) { &BODY_00_19($i,@V); unshift(@V,pop(@V)); }
+
+$code.=<<___;
+ ldah $K,28378(zero)
+ lda $K,-5215($K) # K_20_39
+___
+for (;$i<40;$i++) { &BODY_20_39($i,@V); unshift(@V,pop(@V)); }
+
+$code.=<<___;
+ ldah $K,-28900(zero)
+ lda $K,-17188($K) # K_40_59
+___
+for (;$i<60;$i++) { &BODY_40_59($i,@V); unshift(@V,pop(@V)); }
+
+$code.=<<___;
+ ldah $K,-13725(zero)
+ lda $K,-15914($K) # K_60_79
+___
+for (;$i<80;$i++) { &BODY_20_39($i,@V); unshift(@V,pop(@V)); }
+
+$code.=<<___;
+ addl @X[0],$A,$A
+ addl @X[1],$B,$B
+ addl @X[2],$C,$C
+ addl @X[3],$D,$D
+ addl @X[4],$E,$E
+ stl $A,0($ctx)
+ stl $B,4($ctx)
+ addq $inp,64,$inp
+ stl $C,8($ctx)
+ stl $D,12($ctx)
+ stl $E,16($ctx)
+ cmpult $inp,$num,$t1
+ bne $t1,.Lloop
+
+ .set noreorder
+ ldq ra,0(sp)
+ ldq s0,8(sp)
+ ldq s1,16(sp)
+ ldq s2,24(sp)
+ ldq s3,32(sp)
+ ldq s4,40(sp)
+ ldq s5,48(sp)
+ ldq fp,56(sp)
+ lda sp,64(sp)
+ ret (ra)
+.end sha1_block_data_order
+.ascii "SHA1 block transform for Alpha, CRYPTOGAMS by <appro\@openssl.org>"
+.align 2
+___
+$output=shift and open STDOUT,">$output";
+print $code;
+close STDOUT;
diff --git a/openssl/crypto/sha/asm/sha1-armv4-large.pl b/openssl/crypto/sha/asm/sha1-armv4-large.pl
index 6e65fe3e0..fe8207f77 100644
--- a/openssl/crypto/sha/asm/sha1-armv4-large.pl
+++ b/openssl/crypto/sha/asm/sha1-armv4-large.pl
@@ -47,6 +47,10 @@
# Cortex A8 core and in absolute terms ~870 cycles per input block
# [or 13.6 cycles per byte].
+# February 2011.
+#
+# Profiler-assisted and platform-specific optimization resulted in 10%
+# improvement on Cortex A8 core and 12.2 cycles per byte.
while (($output=shift) && ($output!~/^\w[\w\-]*\.\w+$/)) {}
open STDOUT,">$output";
@@ -76,31 +80,41 @@ $code.=<<___;
add $e,$K,$e,ror#2 @ E+=K_xx_xx
ldr $t3,[$Xi,#2*4]
eor $t0,$t0,$t1
- eor $t2,$t2,$t3
+ eor $t2,$t2,$t3 @ 1 cycle stall
eor $t1,$c,$d @ F_xx_xx
mov $t0,$t0,ror#31
add $e,$e,$a,ror#27 @ E+=ROR(A,27)
eor $t0,$t0,$t2,ror#31
+ str $t0,[$Xi,#-4]!
$opt1 @ F_xx_xx
$opt2 @ F_xx_xx
add $e,$e,$t0 @ E+=X[i]
- str $t0,[$Xi,#-4]!
___
}
sub BODY_00_15 {
my ($a,$b,$c,$d,$e)=@_;
$code.=<<___;
- ldrb $t0,[$inp],#4
- ldrb $t1,[$inp,#-1]
- ldrb $t2,[$inp,#-2]
+#if __ARM_ARCH__<7
+ ldrb $t1,[$inp,#2]
+ ldrb $t0,[$inp,#3]
+ ldrb $t2,[$inp,#1]
add $e,$K,$e,ror#2 @ E+=K_00_19
- ldrb $t3,[$inp,#-3]
+ ldrb $t3,[$inp],#4
+ orr $t0,$t0,$t1,lsl#8
+ eor $t1,$c,$d @ F_xx_xx
+ orr $t0,$t0,$t2,lsl#16
add $e,$e,$a,ror#27 @ E+=ROR(A,27)
- orr $t0,$t1,$t0,lsl#24
+ orr $t0,$t0,$t3,lsl#24
+#else
+ ldr $t0,[$inp],#4 @ handles unaligned
+ add $e,$K,$e,ror#2 @ E+=K_00_19
eor $t1,$c,$d @ F_xx_xx
- orr $t0,$t0,$t2,lsl#8
- orr $t0,$t0,$t3,lsl#16
+ add $e,$e,$a,ror#27 @ E+=ROR(A,27)
+#ifdef __ARMEL__
+ rev $t0,$t0 @ byte swap
+#endif
+#endif
and $t1,$b,$t1,ror#2
add $e,$e,$t0 @ E+=X[i]
eor $t1,$t1,$d,ror#2 @ F_00_19(B,C,D)
@@ -136,6 +150,8 @@ ___
}
$code=<<___;
+#include "arm_arch.h"
+
.text
.global sha1_block_data_order
@@ -209,10 +225,14 @@ $code.=<<___;
teq $inp,$len
bne .Lloop @ [+18], total 1307
+#if __ARM_ARCH__>=5
+ ldmia sp!,{r4-r12,pc}
+#else
ldmia sp!,{r4-r12,lr}
tst lr,#1
moveq pc,lr @ be binary compatible with V4, yet
bx lr @ interoperable with Thumb ISA:-)
+#endif
.align 2
.LK_00_19: .word 0x5a827999
.LK_20_39: .word 0x6ed9eba1
diff --git a/openssl/crypto/sha/asm/sha1-ia64.pl b/openssl/crypto/sha/asm/sha1-ia64.pl
index 51c4f47ec..db28f0805 100644
--- a/openssl/crypto/sha/asm/sha1-ia64.pl
+++ b/openssl/crypto/sha/asm/sha1-ia64.pl
@@ -15,7 +15,7 @@
# is >50% better than HP C and >2x better than gcc.
$code=<<___;
-.ident \"sha1-ia64.s, version 1.2\"
+.ident \"sha1-ia64.s, version 1.3\"
.ident \"IA-64 ISA artwork by Andy Polyakov <appro\@fy.chalmers.se>\"
.explicit
@@ -26,14 +26,10 @@ if ($^O eq "hpux") {
$ADDP="addp4";
for (@ARGV) { $ADDP="add" if (/[\+DD|\-mlp]64/); }
} else { $ADDP="add"; }
-for (@ARGV) { $big_endian=1 if (/\-DB_ENDIAN/);
- $big_endian=0 if (/\-DL_ENDIAN/); }
-if (!defined($big_endian))
- { $big_endian=(unpack('L',pack('N',1))==1); }
#$human=1;
if ($human) { # useful for visual code auditing...
- ($A,$B,$C,$D,$E,$T) = ("A","B","C","D","E","T");
+ ($A,$B,$C,$D,$E) = ("A","B","C","D","E");
($h0,$h1,$h2,$h3,$h4) = ("h0","h1","h2","h3","h4");
($K_00_19, $K_20_39, $K_40_59, $K_60_79) =
( "K_00_19","K_20_39","K_40_59","K_60_79" );
@@ -41,47 +37,50 @@ if ($human) { # useful for visual code auditing...
"X8", "X9","X10","X11","X12","X13","X14","X15" );
}
else {
- ($A,$B,$C,$D,$E,$T) = ("loc0","loc1","loc2","loc3","loc4","loc5");
- ($h0,$h1,$h2,$h3,$h4) = ("loc6","loc7","loc8","loc9","loc10");
+ ($A,$B,$C,$D,$E) = ("loc0","loc1","loc2","loc3","loc4");
+ ($h0,$h1,$h2,$h3,$h4) = ("loc5","loc6","loc7","loc8","loc9");
($K_00_19, $K_20_39, $K_40_59, $K_60_79) =
- ( "r14", "r15", "loc11", "loc12" );
+ ( "r14", "r15", "loc10", "loc11" );
@X= ( "r16", "r17", "r18", "r19", "r20", "r21", "r22", "r23",
"r24", "r25", "r26", "r27", "r28", "r29", "r30", "r31" );
}
sub BODY_00_15 {
local *code=shift;
-local ($i,$a,$b,$c,$d,$e,$f)=@_;
+my ($i,$a,$b,$c,$d,$e)=@_;
+my $j=$i+1;
+my $Xn=@X[$j%16];
$code.=<<___ if ($i==0);
-{ .mmi; ld1 $X[$i&0xf]=[inp],2 // MSB
+{ .mmi; ld1 $X[$i]=[inp],2 // MSB
ld1 tmp2=[tmp3],2 };;
{ .mmi; ld1 tmp0=[inp],2
ld1 tmp4=[tmp3],2 // LSB
- dep $X[$i&0xf]=$X[$i&0xf],tmp2,8,8 };;
+ dep $X[$i]=$X[$i],tmp2,8,8 };;
___
if ($i<15) {
$code.=<<___;
-{ .mmi; ld1 $X[($i+1)&0xf]=[inp],2 // +1
+{ .mmi; ld1 $Xn=[inp],2 // forward Xload
+ nop.m 0x0
dep tmp1=tmp0,tmp4,8,8 };;
-{ .mmi; ld1 tmp2=[tmp3],2 // +1
+{ .mmi; ld1 tmp2=[tmp3],2 // forward Xload
and tmp4=$c,$b
- dep $X[$i&0xf]=$X[$i&0xf],tmp1,16,16 } //;;
-{ .mmi; andcm tmp1=$d,$b
- add tmp0=$e,$K_00_19
+ dep $X[$i]=$X[$i],tmp1,16,16} //;;
+{ .mmi; add $e=$e,$K_00_19 // e+=K_00_19
+ andcm tmp1=$d,$b
dep.z tmp5=$a,5,27 };; // a<<5
-{ .mmi; or tmp4=tmp4,tmp1 // F_00_19(b,c,d)=(b&c)|(~b&d)
- add $f=tmp0,$X[$i&0xf] // f=xi+e+K_00_19
+{ .mmi; add $e=$e,$X[$i] // e+=Xload
+ or tmp4=tmp4,tmp1 // F_00_19(b,c,d)=(b&c)|(~b&d)
extr.u tmp1=$a,27,5 };; // a>>27
-{ .mmi; ld1 tmp0=[inp],2 // +1
- add $f=$f,tmp4 // f+=F_00_19(b,c,d)
+{ .mmi; ld1 tmp0=[inp],2 // forward Xload
+ add $e=$e,tmp4 // e+=F_00_19(b,c,d)
shrp $b=tmp6,tmp6,2 } // b=ROTATE(b,30)
-{ .mmi; ld1 tmp4=[tmp3],2 // +1
+{ .mmi; ld1 tmp4=[tmp3],2 // forward Xload
or tmp5=tmp1,tmp5 // ROTATE(a,5)
mux2 tmp6=$a,0x44 };; // see b in next iteration
-{ .mii; add $f=$f,tmp5 // f+=ROTATE(a,5)
- dep $X[($i+1)&0xf]=$X[($i+1)&0xf],tmp2,8,8 // +1
- mux2 $X[$i&0xf]=$X[$i&0xf],0x44 } //;;
+{ .mii; add $e=$e,tmp5 // e+=ROTATE(a,5)
+ dep $Xn=$Xn,tmp2,8,8 // forward Xload
+ mux2 $X[$i]=$X[$i],0x44 } //;;
___
}
@@ -89,24 +88,24 @@ else {
$code.=<<___;
{ .mii; and tmp3=$c,$b
dep tmp1=tmp0,tmp4,8,8;;
- dep $X[$i&0xf]=$X[$i&0xf],tmp1,16,16 } //;;
-{ .mmi; andcm tmp1=$d,$b
- add tmp0=$e,$K_00_19
+ dep $X[$i]=$X[$i],tmp1,16,16} //;;
+{ .mmi; add $e=$e,$K_00_19 // e+=K_00_19
+ andcm tmp1=$d,$b
dep.z tmp5=$a,5,27 };; // a<<5
-{ .mmi; or tmp4=tmp3,tmp1 // F_00_19(b,c,d)=(b&c)|(~b&d)
- add $f=tmp0,$X[$i&0xf] // f=xi+e+K_00_19
+{ .mmi; add $e=$e,$X[$i] // e+=Xupdate
+ or tmp4=tmp3,tmp1 // F_00_19(b,c,d)=(b&c)|(~b&d)
extr.u tmp1=$a,27,5 } // a>>27
-{ .mmi; xor tmp2=$X[($i+0+1)&0xf],$X[($i+2+1)&0xf] // +1
- xor tmp3=$X[($i+8+1)&0xf],$X[($i+13+1)&0xf] // +1
+{ .mmi; xor $Xn=$Xn,$X[($j+2)%16] // forward Xupdate
+ xor tmp3=$X[($j+8)%16],$X[($j+13)%16] // forward Xupdate
nop.i 0 };;
-{ .mmi; add $f=$f,tmp4 // f+=F_00_19(b,c,d)
- xor tmp2=tmp2,tmp3 // +1
+{ .mmi; add $e=$e,tmp4 // e+=F_00_19(b,c,d)
+ xor $Xn=$Xn,tmp3 // forward Xupdate
shrp $b=tmp6,tmp6,2 } // b=ROTATE(b,30)
{ .mmi; or tmp1=tmp1,tmp5 // ROTATE(a,5)
mux2 tmp6=$a,0x44 };; // see b in next iteration
-{ .mii; add $f=$f,tmp1 // f+=ROTATE(a,5)
- shrp $e=tmp2,tmp2,31 // f+1=ROTATE(x[0]^x[2]^x[8]^x[13],1)
- mux2 $X[$i&0xf]=$X[$i&0xf],0x44 };;
+{ .mii; add $e=$e,tmp1 // e+=ROTATE(a,5)
+ shrp $Xn=$Xn,$Xn,31 // ROTATE(x[0]^x[2]^x[8]^x[13],1)
+ mux2 $X[$i]=$X[$i],0x44 };;
___
}
@@ -114,27 +113,28 @@ ___
sub BODY_16_19 {
local *code=shift;
-local ($i,$a,$b,$c,$d,$e,$f)=@_;
+my ($i,$a,$b,$c,$d,$e)=@_;
+my $j=$i+1;
+my $Xn=@X[$j%16];
$code.=<<___;
-{ .mmi; mov $X[$i&0xf]=$f // Xupdate
- and tmp0=$c,$b
+{ .mib; add $e=$e,$K_00_19 // e+=K_00_19
dep.z tmp5=$a,5,27 } // a<<5
-{ .mmi; andcm tmp1=$d,$b
- add tmp4=$e,$K_00_19 };;
-{ .mmi; or tmp0=tmp0,tmp1 // F_00_19(b,c,d)=(b&c)|(~b&d)
- add $f=$f,tmp4 // f+=e+K_00_19
+{ .mib; andcm tmp1=$d,$b
+ and tmp0=$c,$b };;
+{ .mmi; add $e=$e,$X[$i%16] // e+=Xupdate
+ or tmp0=tmp0,tmp1 // F_00_19(b,c,d)=(b&c)|(~b&d)
extr.u tmp1=$a,27,5 } // a>>27
-{ .mmi; xor tmp2=$X[($i+0+1)&0xf],$X[($i+2+1)&0xf] // +1
- xor tmp3=$X[($i+8+1)&0xf],$X[($i+13+1)&0xf] // +1
+{ .mmi; xor $Xn=$Xn,$X[($j+2)%16] // forward Xupdate
+ xor tmp3=$X[($j+8)%16],$X[($j+13)%16] // forward Xupdate
nop.i 0 };;
-{ .mmi; add $f=$f,tmp0 // f+=F_00_19(b,c,d)
- xor tmp2=tmp2,tmp3 // +1
+{ .mmi; add $e=$e,tmp0 // f+=F_00_19(b,c,d)
+ xor $Xn=$Xn,tmp3 // forward Xupdate
shrp $b=tmp6,tmp6,2 } // b=ROTATE(b,30)
{ .mmi; or tmp1=tmp1,tmp5 // ROTATE(a,5)
mux2 tmp6=$a,0x44 };; // see b in next iteration
-{ .mii; add $f=$f,tmp1 // f+=ROTATE(a,5)
- shrp $e=tmp2,tmp2,31 // f+1=ROTATE(x[0]^x[2]^x[8]^x[13],1)
+{ .mii; add $e=$e,tmp1 // e+=ROTATE(a,5)
+ shrp $Xn=$Xn,$Xn,31 // ROTATE(x[0]^x[2]^x[8]^x[13],1)
nop.i 0 };;
___
@@ -142,49 +142,47 @@ ___
sub BODY_20_39 {
local *code=shift;
-local ($i,$a,$b,$c,$d,$e,$f,$Konst)=@_;
+my ($i,$a,$b,$c,$d,$e,$Konst)=@_;
$Konst = $K_20_39 if (!defined($Konst));
+my $j=$i+1;
+my $Xn=@X[$j%16];
if ($i<79) {
$code.=<<___;
-{ .mib; mov $X[$i&0xf]=$f // Xupdate
+{ .mib; add $e=$e,$Konst // e+=K_XX_XX
dep.z tmp5=$a,5,27 } // a<<5
{ .mib; xor tmp0=$c,$b
- add tmp4=$e,$Konst };;
-{ .mmi; xor tmp0=tmp0,$d // F_20_39(b,c,d)=b^c^d
- add $f=$f,tmp4 // f+=e+K_20_39
+ xor $Xn=$Xn,$X[($j+2)%16] };; // forward Xupdate
+{ .mib; add $e=$e,$X[$i%16] // e+=Xupdate
extr.u tmp1=$a,27,5 } // a>>27
-{ .mmi; xor tmp2=$X[($i+0+1)&0xf],$X[($i+2+1)&0xf] // +1
- xor tmp3=$X[($i+8+1)&0xf],$X[($i+13+1)&0xf] // +1
- nop.i 0 };;
-{ .mmi; add $f=$f,tmp0 // f+=F_20_39(b,c,d)
- xor tmp2=tmp2,tmp3 // +1
+{ .mib; xor tmp0=tmp0,$d // F_20_39(b,c,d)=b^c^d
+ xor $Xn=$Xn,$X[($j+8)%16] };; // forward Xupdate
+{ .mmi; add $e=$e,tmp0 // e+=F_20_39(b,c,d)
+ xor $Xn=$Xn,$X[($j+13)%16] // forward Xupdate
shrp $b=tmp6,tmp6,2 } // b=ROTATE(b,30)
{ .mmi; or tmp1=tmp1,tmp5 // ROTATE(a,5)
mux2 tmp6=$a,0x44 };; // see b in next iteration
-{ .mii; add $f=$f,tmp1 // f+=ROTATE(a,5)
- shrp $e=tmp2,tmp2,31 // f+1=ROTATE(x[0]^x[2]^x[8]^x[13],1)
+{ .mii; add $e=$e,tmp1 // e+=ROTATE(a,5)
+ shrp $Xn=$Xn,$Xn,31 // ROTATE(x[0]^x[2]^x[8]^x[13],1)
nop.i 0 };;
___
}
else {
$code.=<<___;
-{ .mib; mov $X[$i&0xf]=$f // Xupdate
+{ .mib; add $e=$e,$Konst // e+=K_60_79
dep.z tmp5=$a,5,27 } // a<<5
{ .mib; xor tmp0=$c,$b
- add tmp4=$e,$Konst };;
-{ .mib; xor tmp0=tmp0,$d // F_20_39(b,c,d)=b^c^d
- extr.u tmp1=$a,27,5 } // a>>27
-{ .mib; add $f=$f,tmp4 // f+=e+K_20_39
add $h1=$h1,$a };; // wrap up
-{ .mmi; add $f=$f,tmp0 // f+=F_20_39(b,c,d)
- shrp $b=tmp6,tmp6,2 } // b=ROTATE(b,30) ;;?
-{ .mmi; or tmp1=tmp1,tmp5 // ROTATE(a,5)
+{ .mib; add $e=$e,$X[$i%16] // e+=Xupdate
+ extr.u tmp1=$a,27,5 } // a>>27
+{ .mib; xor tmp0=tmp0,$d // F_20_39(b,c,d)=b^c^d
add $h3=$h3,$c };; // wrap up
-{ .mib; add tmp3=1,inp // used in unaligned codepath
- add $f=$f,tmp1 } // f+=ROTATE(a,5)
-{ .mib; add $h2=$h2,$b // wrap up
+{ .mmi; add $e=$e,tmp0 // e+=F_20_39(b,c,d)
+ or tmp1=tmp1,tmp5 // ROTATE(a,5)
+ shrp $b=tmp6,tmp6,2 };; // b=ROTATE(b,30) ;;?
+{ .mmi; add $e=$e,tmp1 // e+=ROTATE(a,5)
+ add tmp3=1,inp // used in unaligned codepath
add $h4=$h4,$d };; // wrap up
___
@@ -193,29 +191,29 @@ ___
sub BODY_40_59 {
local *code=shift;
-local ($i,$a,$b,$c,$d,$e,$f)=@_;
+my ($i,$a,$b,$c,$d,$e)=@_;
+my $j=$i+1;
+my $Xn=@X[$j%16];
$code.=<<___;
-{ .mmi; mov $X[$i&0xf]=$f // Xupdate
- and tmp0=$c,$b
+{ .mib; add $e=$e,$K_40_59 // e+=K_40_59
dep.z tmp5=$a,5,27 } // a<<5
-{ .mmi; and tmp1=$d,$b
- add tmp4=$e,$K_40_59 };;
-{ .mmi; or tmp0=tmp0,tmp1 // (b&c)|(b&d)
- add $f=$f,tmp4 // f+=e+K_40_59
+{ .mib; and tmp1=$c,$d
+ xor tmp0=$c,$d };;
+{ .mmi; add $e=$e,$X[$i%16] // e+=Xupdate
+ add tmp5=tmp5,tmp1 // a<<5+(c&d)
extr.u tmp1=$a,27,5 } // a>>27
-{ .mmi; and tmp4=$c,$d
- xor tmp2=$X[($i+0+1)&0xf],$X[($i+2+1)&0xf] // +1
- xor tmp3=$X[($i+8+1)&0xf],$X[($i+13+1)&0xf] // +1
- };;
-{ .mmi; or tmp1=tmp1,tmp5 // ROTATE(a,5)
- xor tmp2=tmp2,tmp3 // +1
+{ .mmi; and tmp0=tmp0,$b
+ xor $Xn=$Xn,$X[($j+2)%16] // forward Xupdate
+ xor tmp3=$X[($j+8)%16],$X[($j+13)%16] };; // forward Xupdate
+{ .mmi; add $e=$e,tmp0 // e+=b&(c^d)
+ add tmp5=tmp5,tmp1 // ROTATE(a,5)+(c&d)
shrp $b=tmp6,tmp6,2 } // b=ROTATE(b,30)
-{ .mmi; or tmp0=tmp0,tmp4 // F_40_59(b,c,d)=(b&c)|(b&d)|(c&d)
+{ .mmi; xor $Xn=$Xn,tmp3
mux2 tmp6=$a,0x44 };; // see b in next iteration
-{ .mii; add $f=$f,tmp0 // f+=F_40_59(b,c,d)
- shrp $e=tmp2,tmp2,31;; // f+1=ROTATE(x[0]^x[2]^x[8]^x[13],1)
- add $f=$f,tmp1 };; // f+=ROTATE(a,5)
+{ .mii; add $e=$e,tmp5 // e+=ROTATE(a,5)+(c&d)
+ shrp $Xn=$Xn,$Xn,31 // ROTATE(x[0]^x[2]^x[8]^x[13],1)
+ nop.i 0x0 };;
___
}
@@ -237,7 +235,7 @@ inp=r33; // in1
.align 32
sha1_block_data_order:
.prologue
-{ .mmi; alloc tmp1=ar.pfs,3,15,0,0
+{ .mmi; alloc tmp1=ar.pfs,3,14,0,0
$ADDP tmp0=4,ctx
.save ar.lc,r3
mov r3=ar.lc }
@@ -245,8 +243,8 @@ sha1_block_data_order:
$ADDP inp=0,inp
mov r2=pr };;
tmp4=in2;
-tmp5=loc13;
-tmp6=loc14;
+tmp5=loc12;
+tmp6=loc13;
.body
{ .mlx; ld4 $h0=[ctx],8
movl $K_00_19=0x5a827999 }
@@ -273,7 +271,7 @@ tmp6=loc14;
___
-{ my $i,@V=($A,$B,$C,$D,$E,$T);
+{ my $i,@V=($A,$B,$C,$D,$E);
for($i=0;$i<16;$i++) { &BODY_00_15(\$code,$i,@V); unshift(@V,pop(@V)); }
for(;$i<20;$i++) { &BODY_16_19(\$code,$i,@V); unshift(@V,pop(@V)); }
@@ -281,12 +279,12 @@ ___
for(;$i<60;$i++) { &BODY_40_59(\$code,$i,@V); unshift(@V,pop(@V)); }
for(;$i<80;$i++) { &BODY_60_79(\$code,$i,@V); unshift(@V,pop(@V)); }
- (($V[5] eq $D) and ($V[0] eq $E)) or die; # double-check
+ (($V[0] eq $A) and ($V[4] eq $E)) or die; # double-check
}
$code.=<<___;
-{ .mmb; add $h0=$h0,$E
- nop.m 0
+{ .mmb; add $h0=$h0,$A
+ add $h2=$h2,$C
br.ctop.dptk.many .Ldtop };;
.Ldend:
{ .mmi; add tmp0=4,ctx
diff --git a/openssl/crypto/sha/asm/sha1-mips.pl b/openssl/crypto/sha/asm/sha1-mips.pl
new file mode 100644
index 000000000..f1a702f38
--- /dev/null
+++ b/openssl/crypto/sha/asm/sha1-mips.pl
@@ -0,0 +1,354 @@
+#!/usr/bin/env perl
+
+# ====================================================================
+# Written by Andy Polyakov <appro@fy.chalmers.se> for the OpenSSL
+# project. The module is, however, dual licensed under OpenSSL and
+# CRYPTOGAMS licenses depending on where you obtain it. For further
+# details see http://www.openssl.org/~appro/cryptogams/.
+# ====================================================================
+
+# SHA1 block procedure for MIPS.
+
+# Performance improvement is 30% on unaligned input. The "secret" is
+# to deploy lwl/lwr pair to load unaligned input. One could have
+# vectorized Xupdate on MIPSIII/IV, but the goal was to code MIPS32-
+# compatible subroutine. There is room for minor optimization on
+# little-endian platforms...
+
+######################################################################
+# There is a number of MIPS ABI in use, O32 and N32/64 are most
+# widely used. Then there is a new contender: NUBI. It appears that if
+# one picks the latter, it's possible to arrange code in ABI neutral
+# manner. Therefore let's stick to NUBI register layout:
+#
+($zero,$at,$t0,$t1,$t2)=map("\$$_",(0..2,24,25));
+($a0,$a1,$a2,$a3,$a4,$a5,$a6,$a7)=map("\$$_",(4..11));
+($s0,$s1,$s2,$s3,$s4,$s5,$s6,$s7,$s8,$s9,$s10,$s11)=map("\$$_",(12..23));
+($gp,$tp,$sp,$fp,$ra)=map("\$$_",(3,28..31));
+#
+# The return value is placed in $a0. Following coding rules facilitate
+# interoperability:
+#
+# - never ever touch $tp, "thread pointer", former $gp;
+# - copy return value to $t0, former $v0 [or to $a0 if you're adapting
+# old code];
+# - on O32 populate $a4-$a7 with 'lw $aN,4*N($sp)' if necessary;
+#
+# For reference here is register layout for N32/64 MIPS ABIs:
+#
+# ($zero,$at,$v0,$v1)=map("\$$_",(0..3));
+# ($a0,$a1,$a2,$a3,$a4,$a5,$a6,$a7)=map("\$$_",(4..11));
+# ($t0,$t1,$t2,$t3,$t8,$t9)=map("\$$_",(12..15,24,25));
+# ($s0,$s1,$s2,$s3,$s4,$s5,$s6,$s7)=map("\$$_",(16..23));
+# ($gp,$sp,$fp,$ra)=map("\$$_",(28..31));
+#
+$flavour = shift; # supported flavours are o32,n32,64,nubi32,nubi64
+
+if ($flavour =~ /64|n32/i) {
+ $PTR_ADD="dadd"; # incidentally works even on n32
+ $PTR_SUB="dsub"; # incidentally works even on n32
+ $REG_S="sd";
+ $REG_L="ld";
+ $PTR_SLL="dsll"; # incidentally works even on n32
+ $SZREG=8;
+} else {
+ $PTR_ADD="add";
+ $PTR_SUB="sub";
+ $REG_S="sw";
+ $REG_L="lw";
+ $PTR_SLL="sll";
+ $SZREG=4;
+}
+#
+# <appro@openssl.org>
+#
+######################################################################
+
+$big_endian=(`echo MIPSEL | $ENV{CC} -E -P -`=~/MIPSEL/)?1:0;
+
+for (@ARGV) { $output=$_ if (/^\w[\w\-]*\.\w+$/); }
+open STDOUT,">$output";
+
+if (!defined($big_endian))
+ { $big_endian=(unpack('L',pack('N',1))==1); }
+
+# offsets of the Most and Least Significant Bytes
+$MSB=$big_endian?0:3;
+$LSB=3&~$MSB;
+
+@X=map("\$$_",(8..23)); # a4-a7,s0-s11
+
+$ctx=$a0;
+$inp=$a1;
+$num=$a2;
+$A="\$1";
+$B="\$2";
+$C="\$3";
+$D="\$7";
+$E="\$24"; @V=($A,$B,$C,$D,$E);
+$t0="\$25";
+$t1=$num; # $num is offloaded to stack
+$t2="\$30"; # fp
+$K="\$31"; # ra
+
+sub BODY_00_14 {
+my ($i,$a,$b,$c,$d,$e)=@_;
+my $j=$i+1;
+$code.=<<___ if (!$big_endian);
+ srl $t0,@X[$i],24 # byte swap($i)
+ srl $t1,@X[$i],8
+ andi $t2,@X[$i],0xFF00
+ sll @X[$i],@X[$i],24
+ andi $t1,0xFF00
+ sll $t2,$t2,8
+ or @X[$i],$t0
+ or $t1,$t2
+ or @X[$i],$t1
+___
+$code.=<<___;
+ lwl @X[$j],$j*4+$MSB($inp)
+ sll $t0,$a,5 # $i
+ addu $e,$K
+ lwr @X[$j],$j*4+$LSB($inp)
+ srl $t1,$a,27
+ addu $e,$t0
+ xor $t0,$c,$d
+ addu $e,$t1
+ sll $t2,$b,30
+ and $t0,$b
+ srl $b,$b,2
+ xor $t0,$d
+ addu $e,@X[$i]
+ or $b,$t2
+ addu $e,$t0
+___
+}
+
+sub BODY_15_19 {
+my ($i,$a,$b,$c,$d,$e)=@_;
+my $j=$i+1;
+
+$code.=<<___ if (!$big_endian && $i==15);
+ srl $t0,@X[$i],24 # byte swap($i)
+ srl $t1,@X[$i],8
+ andi $t2,@X[$i],0xFF00
+ sll @X[$i],@X[$i],24
+ andi $t1,0xFF00
+ sll $t2,$t2,8
+ or @X[$i],$t0
+ or @X[$i],$t1
+ or @X[$i],$t2
+___
+$code.=<<___;
+ xor @X[$j%16],@X[($j+2)%16]
+ sll $t0,$a,5 # $i
+ addu $e,$K
+ srl $t1,$a,27
+ addu $e,$t0
+ xor @X[$j%16],@X[($j+8)%16]
+ xor $t0,$c,$d
+ addu $e,$t1
+ xor @X[$j%16],@X[($j+13)%16]
+ sll $t2,$b,30
+ and $t0,$b
+ srl $t1,@X[$j%16],31
+ addu @X[$j%16],@X[$j%16]
+ srl $b,$b,2
+ xor $t0,$d
+ or @X[$j%16],$t1
+ addu $e,@X[$i%16]
+ or $b,$t2
+ addu $e,$t0
+___
+}
+
+sub BODY_20_39 {
+my ($i,$a,$b,$c,$d,$e)=@_;
+my $j=$i+1;
+$code.=<<___ if ($i<79);
+ xor @X[$j%16],@X[($j+2)%16]
+ sll $t0,$a,5 # $i
+ addu $e,$K
+ srl $t1,$a,27
+ addu $e,$t0
+ xor @X[$j%16],@X[($j+8)%16]
+ xor $t0,$c,$d
+ addu $e,$t1
+ xor @X[$j%16],@X[($j+13)%16]
+ sll $t2,$b,30
+ xor $t0,$b
+ srl $t1,@X[$j%16],31
+ addu @X[$j%16],@X[$j%16]
+ srl $b,$b,2
+ addu $e,@X[$i%16]
+ or @X[$j%16],$t1
+ or $b,$t2
+ addu $e,$t0
+___
+$code.=<<___ if ($i==79);
+ lw @X[0],0($ctx)
+ sll $t0,$a,5 # $i
+ addu $e,$K
+ lw @X[1],4($ctx)
+ srl $t1,$a,27
+ addu $e,$t0
+ lw @X[2],8($ctx)
+ xor $t0,$c,$d
+ addu $e,$t1
+ lw @X[3],12($ctx)
+ sll $t2,$b,30
+ xor $t0,$b
+ lw @X[4],16($ctx)
+ srl $b,$b,2
+ addu $e,@X[$i%16]
+ or $b,$t2
+ addu $e,$t0
+___
+}
+
+sub BODY_40_59 {
+my ($i,$a,$b,$c,$d,$e)=@_;
+my $j=$i+1;
+$code.=<<___ if ($i<79);
+ xor @X[$j%16],@X[($j+2)%16]
+ sll $t0,$a,5 # $i
+ addu $e,$K
+ srl $t1,$a,27
+ addu $e,$t0
+ xor @X[$j%16],@X[($j+8)%16]
+ and $t0,$c,$d
+ addu $e,$t1
+ xor @X[$j%16],@X[($j+13)%16]
+ sll $t2,$b,30
+ addu $e,$t0
+ srl $t1,@X[$j%16],31
+ xor $t0,$c,$d
+ addu @X[$j%16],@X[$j%16]
+ and $t0,$b
+ srl $b,$b,2
+ or @X[$j%16],$t1
+ addu $e,@X[$i%16]
+ or $b,$t2
+ addu $e,$t0
+___
+}
+
+$FRAMESIZE=16; # large enough to accomodate NUBI saved registers
+$SAVED_REGS_MASK = ($flavour =~ /nubi/i) ? 0xc0fff008 : 0xc0ff0000;
+
+$code=<<___;
+#ifdef OPENSSL_FIPSCANISTER
+# include <openssl/fipssyms.h>
+#endif
+
+.text
+
+.set noat
+.set noreorder
+.align 5
+.globl sha1_block_data_order
+.ent sha1_block_data_order
+sha1_block_data_order:
+ .frame $sp,$FRAMESIZE*$SZREG,$ra
+ .mask $SAVED_REGS_MASK,-$SZREG
+ .set noreorder
+ $PTR_SUB $sp,$FRAMESIZE*$SZREG
+ $REG_S $ra,($FRAMESIZE-1)*$SZREG($sp)
+ $REG_S $fp,($FRAMESIZE-2)*$SZREG($sp)
+ $REG_S $s11,($FRAMESIZE-3)*$SZREG($sp)
+ $REG_S $s10,($FRAMESIZE-4)*$SZREG($sp)
+ $REG_S $s9,($FRAMESIZE-5)*$SZREG($sp)
+ $REG_S $s8,($FRAMESIZE-6)*$SZREG($sp)
+ $REG_S $s7,($FRAMESIZE-7)*$SZREG($sp)
+ $REG_S $s6,($FRAMESIZE-8)*$SZREG($sp)
+ $REG_S $s5,($FRAMESIZE-9)*$SZREG($sp)
+ $REG_S $s4,($FRAMESIZE-10)*$SZREG($sp)
+___
+$code.=<<___ if ($flavour =~ /nubi/i); # optimize non-nubi prologue
+ $REG_S $s3,($FRAMESIZE-11)*$SZREG($sp)
+ $REG_S $s2,($FRAMESIZE-12)*$SZREG($sp)
+ $REG_S $s1,($FRAMESIZE-13)*$SZREG($sp)
+ $REG_S $s0,($FRAMESIZE-14)*$SZREG($sp)
+ $REG_S $gp,($FRAMESIZE-15)*$SZREG($sp)
+___
+$code.=<<___;
+ $PTR_SLL $num,6
+ $PTR_ADD $num,$inp
+ $REG_S $num,0($sp)
+ lw $A,0($ctx)
+ lw $B,4($ctx)
+ lw $C,8($ctx)
+ lw $D,12($ctx)
+ b .Loop
+ lw $E,16($ctx)
+.align 4
+.Loop:
+ .set reorder
+ lwl @X[0],$MSB($inp)
+ lui $K,0x5a82
+ lwr @X[0],$LSB($inp)
+ ori $K,0x7999 # K_00_19
+___
+for ($i=0;$i<15;$i++) { &BODY_00_14($i,@V); unshift(@V,pop(@V)); }
+for (;$i<20;$i++) { &BODY_15_19($i,@V); unshift(@V,pop(@V)); }
+$code.=<<___;
+ lui $K,0x6ed9
+ ori $K,0xeba1 # K_20_39
+___
+for (;$i<40;$i++) { &BODY_20_39($i,@V); unshift(@V,pop(@V)); }
+$code.=<<___;
+ lui $K,0x8f1b
+ ori $K,0xbcdc # K_40_59
+___
+for (;$i<60;$i++) { &BODY_40_59($i,@V); unshift(@V,pop(@V)); }
+$code.=<<___;
+ lui $K,0xca62
+ ori $K,0xc1d6 # K_60_79
+___
+for (;$i<80;$i++) { &BODY_20_39($i,@V); unshift(@V,pop(@V)); }
+$code.=<<___;
+ $PTR_ADD $inp,64
+ $REG_L $num,0($sp)
+
+ addu $A,$X[0]
+ addu $B,$X[1]
+ sw $A,0($ctx)
+ addu $C,$X[2]
+ addu $D,$X[3]
+ sw $B,4($ctx)
+ addu $E,$X[4]
+ sw $C,8($ctx)
+ sw $D,12($ctx)
+ sw $E,16($ctx)
+ .set noreorder
+ bne $inp,$num,.Loop
+ nop
+
+ .set noreorder
+ $REG_L $ra,($FRAMESIZE-1)*$SZREG($sp)
+ $REG_L $fp,($FRAMESIZE-2)*$SZREG($sp)
+ $REG_L $s11,($FRAMESIZE-3)*$SZREG($sp)
+ $REG_L $s10,($FRAMESIZE-4)*$SZREG($sp)
+ $REG_L $s9,($FRAMESIZE-5)*$SZREG($sp)
+ $REG_L $s8,($FRAMESIZE-6)*$SZREG($sp)
+ $REG_L $s7,($FRAMESIZE-7)*$SZREG($sp)
+ $REG_L $s6,($FRAMESIZE-8)*$SZREG($sp)
+ $REG_L $s5,($FRAMESIZE-9)*$SZREG($sp)
+ $REG_L $s4,($FRAMESIZE-10)*$SZREG($sp)
+___
+$code.=<<___ if ($flavour =~ /nubi/i);
+ $REG_L $s3,($FRAMESIZE-11)*$SZREG($sp)
+ $REG_L $s2,($FRAMESIZE-12)*$SZREG($sp)
+ $REG_L $s1,($FRAMESIZE-13)*$SZREG($sp)
+ $REG_L $s0,($FRAMESIZE-14)*$SZREG($sp)
+ $REG_L $gp,($FRAMESIZE-15)*$SZREG($sp)
+___
+$code.=<<___;
+ jr $ra
+ $PTR_ADD $sp,$FRAMESIZE*$SZREG
+.end sha1_block_data_order
+.rdata
+.asciiz "SHA1 for MIPS, CRYPTOGAMS by <appro\@openssl.org>"
+___
+print $code;
+close STDOUT;
diff --git a/openssl/crypto/sha/asm/sha1-parisc.pl b/openssl/crypto/sha/asm/sha1-parisc.pl
new file mode 100644
index 000000000..6d7bf495b
--- /dev/null
+++ b/openssl/crypto/sha/asm/sha1-parisc.pl
@@ -0,0 +1,259 @@
+#!/usr/bin/env perl
+
+# ====================================================================
+# Written by Andy Polyakov <appro@fy.chalmers.se> for the OpenSSL
+# project. The module is, however, dual licensed under OpenSSL and
+# CRYPTOGAMS licenses depending on where you obtain it. For further
+# details see http://www.openssl.org/~appro/cryptogams/.
+# ====================================================================
+
+# SHA1 block procedure for PA-RISC.
+
+# June 2009.
+#
+# On PA-7100LC performance is >30% better than gcc 3.2 generated code
+# for aligned input and >50% better for unaligned. Compared to vendor
+# compiler on PA-8600 it's almost 60% faster in 64-bit build and just
+# few percent faster in 32-bit one (this for aligned input, data for
+# unaligned input is not available).
+#
+# Special thanks to polarhome.com for providing HP-UX account.
+
+$flavour = shift;
+$output = shift;
+open STDOUT,">$output";
+
+if ($flavour =~ /64/) {
+ $LEVEL ="2.0W";
+ $SIZE_T =8;
+ $FRAME_MARKER =80;
+ $SAVED_RP =16;
+ $PUSH ="std";
+ $PUSHMA ="std,ma";
+ $POP ="ldd";
+ $POPMB ="ldd,mb";
+} else {
+ $LEVEL ="1.0";
+ $SIZE_T =4;
+ $FRAME_MARKER =48;
+ $SAVED_RP =20;
+ $PUSH ="stw";
+ $PUSHMA ="stwm";
+ $POP ="ldw";
+ $POPMB ="ldwm";
+}
+
+$FRAME=14*$SIZE_T+$FRAME_MARKER;# 14 saved regs + frame marker
+ # [+ argument transfer]
+$ctx="%r26"; # arg0
+$inp="%r25"; # arg1
+$num="%r24"; # arg2
+
+$t0="%r28";
+$t1="%r29";
+$K="%r31";
+
+@X=("%r1", "%r2", "%r3", "%r4", "%r5", "%r6", "%r7", "%r8",
+ "%r9", "%r10","%r11","%r12","%r13","%r14","%r15","%r16",$t0);
+
+@V=($A,$B,$C,$D,$E)=("%r19","%r20","%r21","%r22","%r23");
+
+sub BODY_00_19 {
+my ($i,$a,$b,$c,$d,$e)=@_;
+my $j=$i+1;
+$code.=<<___ if ($i<15);
+ addl $K,$e,$e ; $i
+ shd $a,$a,27,$t1
+ addl @X[$i],$e,$e
+ and $c,$b,$t0
+ addl $t1,$e,$e
+ andcm $d,$b,$t1
+ shd $b,$b,2,$b
+ or $t1,$t0,$t0
+ addl $t0,$e,$e
+___
+$code.=<<___ if ($i>=15); # with forward Xupdate
+ addl $K,$e,$e ; $i
+ shd $a,$a,27,$t1
+ xor @X[($j+2)%16],@X[$j%16],@X[$j%16]
+ addl @X[$i%16],$e,$e
+ and $c,$b,$t0
+ xor @X[($j+8)%16],@X[$j%16],@X[$j%16]
+ addl $t1,$e,$e
+ andcm $d,$b,$t1
+ shd $b,$b,2,$b
+ or $t1,$t0,$t0
+ xor @X[($j+13)%16],@X[$j%16],@X[$j%16]
+ add $t0,$e,$e
+ shd @X[$j%16],@X[$j%16],31,@X[$j%16]
+___
+}
+
+sub BODY_20_39 {
+my ($i,$a,$b,$c,$d,$e)=@_;
+my $j=$i+1;
+$code.=<<___ if ($i<79);
+ xor @X[($j+2)%16],@X[$j%16],@X[$j%16] ; $i
+ addl $K,$e,$e
+ shd $a,$a,27,$t1
+ xor @X[($j+8)%16],@X[$j%16],@X[$j%16]
+ addl @X[$i%16],$e,$e
+ xor $b,$c,$t0
+ xor @X[($j+13)%16],@X[$j%16],@X[$j%16]
+ addl $t1,$e,$e
+ shd $b,$b,2,$b
+ xor $d,$t0,$t0
+ shd @X[$j%16],@X[$j%16],31,@X[$j%16]
+ addl $t0,$e,$e
+___
+$code.=<<___ if ($i==79); # with context load
+ ldw 0($ctx),@X[0] ; $i
+ addl $K,$e,$e
+ shd $a,$a,27,$t1
+ ldw 4($ctx),@X[1]
+ addl @X[$i%16],$e,$e
+ xor $b,$c,$t0
+ ldw 8($ctx),@X[2]
+ addl $t1,$e,$e
+ shd $b,$b,2,$b
+ xor $d,$t0,$t0
+ ldw 12($ctx),@X[3]
+ addl $t0,$e,$e
+ ldw 16($ctx),@X[4]
+___
+}
+
+sub BODY_40_59 {
+my ($i,$a,$b,$c,$d,$e)=@_;
+my $j=$i+1;
+$code.=<<___;
+ shd $a,$a,27,$t1 ; $i
+ addl $K,$e,$e
+ xor @X[($j+2)%16],@X[$j%16],@X[$j%16]
+ xor $d,$c,$t0
+ addl @X[$i%16],$e,$e
+ xor @X[($j+8)%16],@X[$j%16],@X[$j%16]
+ and $b,$t0,$t0
+ addl $t1,$e,$e
+ shd $b,$b,2,$b
+ xor @X[($j+13)%16],@X[$j%16],@X[$j%16]
+ addl $t0,$e,$e
+ and $d,$c,$t1
+ shd @X[$j%16],@X[$j%16],31,@X[$j%16]
+ addl $t1,$e,$e
+___
+}
+
+$code=<<___;
+ .LEVEL $LEVEL
+ .SPACE \$TEXT\$
+ .SUBSPA \$CODE\$,QUAD=0,ALIGN=8,ACCESS=0x2C,CODE_ONLY
+
+ .EXPORT sha1_block_data_order,ENTRY,ARGW0=GR,ARGW1=GR,ARGW2=GR
+sha1_block_data_order
+ .PROC
+ .CALLINFO FRAME=`$FRAME-14*$SIZE_T`,NO_CALLS,SAVE_RP,ENTRY_GR=16
+ .ENTRY
+ $PUSH %r2,-$SAVED_RP(%sp) ; standard prologue
+ $PUSHMA %r3,$FRAME(%sp)
+ $PUSH %r4,`-$FRAME+1*$SIZE_T`(%sp)
+ $PUSH %r5,`-$FRAME+2*$SIZE_T`(%sp)
+ $PUSH %r6,`-$FRAME+3*$SIZE_T`(%sp)
+ $PUSH %r7,`-$FRAME+4*$SIZE_T`(%sp)
+ $PUSH %r8,`-$FRAME+5*$SIZE_T`(%sp)
+ $PUSH %r9,`-$FRAME+6*$SIZE_T`(%sp)
+ $PUSH %r10,`-$FRAME+7*$SIZE_T`(%sp)
+ $PUSH %r11,`-$FRAME+8*$SIZE_T`(%sp)
+ $PUSH %r12,`-$FRAME+9*$SIZE_T`(%sp)
+ $PUSH %r13,`-$FRAME+10*$SIZE_T`(%sp)
+ $PUSH %r14,`-$FRAME+11*$SIZE_T`(%sp)
+ $PUSH %r15,`-$FRAME+12*$SIZE_T`(%sp)
+ $PUSH %r16,`-$FRAME+13*$SIZE_T`(%sp)
+
+ ldw 0($ctx),$A
+ ldw 4($ctx),$B
+ ldw 8($ctx),$C
+ ldw 12($ctx),$D
+ ldw 16($ctx),$E
+
+ extru $inp,31,2,$t0 ; t0=inp&3;
+ sh3addl $t0,%r0,$t0 ; t0*=8;
+ subi 32,$t0,$t0 ; t0=32-t0;
+ mtctl $t0,%cr11 ; %sar=t0;
+
+L\$oop
+ ldi 3,$t0
+ andcm $inp,$t0,$t0 ; 64-bit neutral
+___
+ for ($i=0;$i<15;$i++) { # load input block
+ $code.="\tldw `4*$i`($t0),@X[$i]\n"; }
+$code.=<<___;
+ cmpb,*= $inp,$t0,L\$aligned
+ ldw 60($t0),@X[15]
+ ldw 64($t0),@X[16]
+___
+ for ($i=0;$i<16;$i++) { # align input
+ $code.="\tvshd @X[$i],@X[$i+1],@X[$i]\n"; }
+$code.=<<___;
+L\$aligned
+ ldil L'0x5a827000,$K ; K_00_19
+ ldo 0x999($K),$K
+___
+for ($i=0;$i<20;$i++) { &BODY_00_19($i,@V); unshift(@V,pop(@V)); }
+$code.=<<___;
+ ldil L'0x6ed9e000,$K ; K_20_39
+ ldo 0xba1($K),$K
+___
+
+for (;$i<40;$i++) { &BODY_20_39($i,@V); unshift(@V,pop(@V)); }
+$code.=<<___;
+ ldil L'0x8f1bb000,$K ; K_40_59
+ ldo 0xcdc($K),$K
+___
+
+for (;$i<60;$i++) { &BODY_40_59($i,@V); unshift(@V,pop(@V)); }
+$code.=<<___;
+ ldil L'0xca62c000,$K ; K_60_79
+ ldo 0x1d6($K),$K
+___
+for (;$i<80;$i++) { &BODY_20_39($i,@V); unshift(@V,pop(@V)); }
+
+$code.=<<___;
+ addl @X[0],$A,$A
+ addl @X[1],$B,$B
+ addl @X[2],$C,$C
+ addl @X[3],$D,$D
+ addl @X[4],$E,$E
+ stw $A,0($ctx)
+ stw $B,4($ctx)
+ stw $C,8($ctx)
+ stw $D,12($ctx)
+ stw $E,16($ctx)
+ addib,*<> -1,$num,L\$oop
+ ldo 64($inp),$inp
+
+ $POP `-$FRAME-$SAVED_RP`(%sp),%r2 ; standard epilogue
+ $POP `-$FRAME+1*$SIZE_T`(%sp),%r4
+ $POP `-$FRAME+2*$SIZE_T`(%sp),%r5
+ $POP `-$FRAME+3*$SIZE_T`(%sp),%r6
+ $POP `-$FRAME+4*$SIZE_T`(%sp),%r7
+ $POP `-$FRAME+5*$SIZE_T`(%sp),%r8
+ $POP `-$FRAME+6*$SIZE_T`(%sp),%r9
+ $POP `-$FRAME+7*$SIZE_T`(%sp),%r10
+ $POP `-$FRAME+8*$SIZE_T`(%sp),%r11
+ $POP `-$FRAME+9*$SIZE_T`(%sp),%r12
+ $POP `-$FRAME+10*$SIZE_T`(%sp),%r13
+ $POP `-$FRAME+11*$SIZE_T`(%sp),%r14
+ $POP `-$FRAME+12*$SIZE_T`(%sp),%r15
+ $POP `-$FRAME+13*$SIZE_T`(%sp),%r16
+ bv (%r2)
+ .EXIT
+ $POPMB -$FRAME(%sp),%r3
+ .PROCEND
+ .STRINGZ "SHA1 block transform for PA-RISC, CRYPTOGAMS by <appro\@openssl.org>"
+___
+
+$code =~ s/\`([^\`]*)\`/eval $1/gem;
+$code =~ s/,\*/,/gm if ($SIZE_T==4);
+print $code;
+close STDOUT;
diff --git a/openssl/crypto/sha/asm/sha1-ppc.pl b/openssl/crypto/sha/asm/sha1-ppc.pl
index dcd0fcdfc..2140dd2f8 100644
--- a/openssl/crypto/sha/asm/sha1-ppc.pl
+++ b/openssl/crypto/sha/asm/sha1-ppc.pl
@@ -24,12 +24,14 @@ $flavour = shift;
if ($flavour =~ /64/) {
$SIZE_T =8;
+ $LRSAVE =2*$SIZE_T;
$UCMP ="cmpld";
$STU ="stdu";
$POP ="ld";
$PUSH ="std";
} elsif ($flavour =~ /32/) {
$SIZE_T =4;
+ $LRSAVE =$SIZE_T;
$UCMP ="cmplw";
$STU ="stwu";
$POP ="lwz";
@@ -43,7 +45,8 @@ die "can't locate ppc-xlate.pl";
open STDOUT,"| $^X $xlate $flavour ".shift || die "can't call $xlate: $!";
-$FRAME=24*$SIZE_T;
+$FRAME=24*$SIZE_T+64;
+$LOCALS=6*$SIZE_T;
$K ="r0";
$sp ="r1";
@@ -162,9 +165,8 @@ $code=<<___;
.globl .sha1_block_data_order
.align 4
.sha1_block_data_order:
+ $STU $sp,-$FRAME($sp)
mflr r0
- $STU $sp,`-($FRAME+64)`($sp)
- $PUSH r0,`$FRAME-$SIZE_T*18`($sp)
$PUSH r15,`$FRAME-$SIZE_T*17`($sp)
$PUSH r16,`$FRAME-$SIZE_T*16`($sp)
$PUSH r17,`$FRAME-$SIZE_T*15`($sp)
@@ -182,6 +184,7 @@ $code=<<___;
$PUSH r29,`$FRAME-$SIZE_T*3`($sp)
$PUSH r30,`$FRAME-$SIZE_T*2`($sp)
$PUSH r31,`$FRAME-$SIZE_T*1`($sp)
+ $PUSH r0,`$FRAME+$LRSAVE`($sp)
lwz $A,0($ctx)
lwz $B,4($ctx)
lwz $C,8($ctx)
@@ -192,37 +195,14 @@ $code=<<___;
Laligned:
mtctr $num
bl Lsha1_block_private
-Ldone:
- $POP r0,`$FRAME-$SIZE_T*18`($sp)
- $POP r15,`$FRAME-$SIZE_T*17`($sp)
- $POP r16,`$FRAME-$SIZE_T*16`($sp)
- $POP r17,`$FRAME-$SIZE_T*15`($sp)
- $POP r18,`$FRAME-$SIZE_T*14`($sp)
- $POP r19,`$FRAME-$SIZE_T*13`($sp)
- $POP r20,`$FRAME-$SIZE_T*12`($sp)
- $POP r21,`$FRAME-$SIZE_T*11`($sp)
- $POP r22,`$FRAME-$SIZE_T*10`($sp)
- $POP r23,`$FRAME-$SIZE_T*9`($sp)
- $POP r24,`$FRAME-$SIZE_T*8`($sp)
- $POP r25,`$FRAME-$SIZE_T*7`($sp)
- $POP r26,`$FRAME-$SIZE_T*6`($sp)
- $POP r27,`$FRAME-$SIZE_T*5`($sp)
- $POP r28,`$FRAME-$SIZE_T*4`($sp)
- $POP r29,`$FRAME-$SIZE_T*3`($sp)
- $POP r30,`$FRAME-$SIZE_T*2`($sp)
- $POP r31,`$FRAME-$SIZE_T*1`($sp)
- mtlr r0
- addi $sp,$sp,`$FRAME+64`
- blr
-___
+ b Ldone
-# PowerPC specification allows an implementation to be ill-behaved
-# upon unaligned access which crosses page boundary. "Better safe
-# than sorry" principle makes me treat it specially. But I don't
-# look for particular offending word, but rather for 64-byte input
-# block which crosses the boundary. Once found that block is aligned
-# and hashed separately...
-$code.=<<___;
+; PowerPC specification allows an implementation to be ill-behaved
+; upon unaligned access which crosses page boundary. "Better safe
+; than sorry" principle makes me treat it specially. But I don't
+; look for particular offending word, but rather for 64-byte input
+; block which crosses the boundary. Once found that block is aligned
+; and hashed separately...
.align 4
Lunaligned:
subfic $t1,$inp,4096
@@ -237,7 +217,7 @@ Lunaligned:
Lcross_page:
li $t1,16
mtctr $t1
- addi r20,$sp,$FRAME ; spot below the frame
+ addi r20,$sp,$LOCALS ; spot within the frame
Lmemcpy:
lbz r16,0($inp)
lbz r17,1($inp)
@@ -251,15 +231,40 @@ Lmemcpy:
addi r20,r20,4
bdnz Lmemcpy
- $PUSH $inp,`$FRAME-$SIZE_T*19`($sp)
+ $PUSH $inp,`$FRAME-$SIZE_T*18`($sp)
li $t1,1
- addi $inp,$sp,$FRAME
+ addi $inp,$sp,$LOCALS
mtctr $t1
bl Lsha1_block_private
- $POP $inp,`$FRAME-$SIZE_T*19`($sp)
+ $POP $inp,`$FRAME-$SIZE_T*18`($sp)
addic. $num,$num,-1
bne- Lunaligned
- b Ldone
+
+Ldone:
+ $POP r0,`$FRAME+$LRSAVE`($sp)
+ $POP r15,`$FRAME-$SIZE_T*17`($sp)
+ $POP r16,`$FRAME-$SIZE_T*16`($sp)
+ $POP r17,`$FRAME-$SIZE_T*15`($sp)
+ $POP r18,`$FRAME-$SIZE_T*14`($sp)
+ $POP r19,`$FRAME-$SIZE_T*13`($sp)
+ $POP r20,`$FRAME-$SIZE_T*12`($sp)
+ $POP r21,`$FRAME-$SIZE_T*11`($sp)
+ $POP r22,`$FRAME-$SIZE_T*10`($sp)
+ $POP r23,`$FRAME-$SIZE_T*9`($sp)
+ $POP r24,`$FRAME-$SIZE_T*8`($sp)
+ $POP r25,`$FRAME-$SIZE_T*7`($sp)
+ $POP r26,`$FRAME-$SIZE_T*6`($sp)
+ $POP r27,`$FRAME-$SIZE_T*5`($sp)
+ $POP r28,`$FRAME-$SIZE_T*4`($sp)
+ $POP r29,`$FRAME-$SIZE_T*3`($sp)
+ $POP r30,`$FRAME-$SIZE_T*2`($sp)
+ $POP r31,`$FRAME-$SIZE_T*1`($sp)
+ mtlr r0
+ addi $sp,$sp,$FRAME
+ blr
+ .long 0
+ .byte 0,12,4,1,0x80,18,3,0
+ .long 0
___
# This is private block function, which uses tailored calling
@@ -309,6 +314,8 @@ $code.=<<___;
addi $inp,$inp,`16*4`
bdnz- Lsha1_block_private
blr
+ .long 0
+ .byte 0,12,0x14,0,0,0,0,0
___
$code.=<<___;
.asciz "SHA1 block transform for PPC, CRYPTOGAMS by <appro\@fy.chalmers.se>"
diff --git a/openssl/crypto/sha/asm/sha1-s390x.pl b/openssl/crypto/sha/asm/sha1-s390x.pl
index 4b1784828..9193dda45 100644
--- a/openssl/crypto/sha/asm/sha1-s390x.pl
+++ b/openssl/crypto/sha/asm/sha1-s390x.pl
@@ -21,9 +21,28 @@
# instructions to favour dual-issue z10 pipeline. On z10 hardware is
# "only" ~2.3x faster than software.
+# November 2010.
+#
+# Adapt for -m31 build. If kernel supports what's called "highgprs"
+# feature on Linux [see /proc/cpuinfo], it's possible to use 64-bit
+# instructions and achieve "64-bit" performance even in 31-bit legacy
+# application context. The feature is not specific to any particular
+# processor, as long as it's "z-CPU". Latter implies that the code
+# remains z/Architecture specific.
+
$kimdfunc=1; # magic function code for kimd instruction
-$output=shift;
+$flavour = shift;
+
+if ($flavour =~ /3[12]/) {
+ $SIZE_T=4;
+ $g="";
+} else {
+ $SIZE_T=8;
+ $g="g";
+}
+
+while (($output=shift) && ($output!~/^\w[\w\-]*\.\w+$/)) {}
open STDOUT,">$output";
$K_00_39="%r0"; $K=$K_00_39;
@@ -42,13 +61,14 @@ $t1="%r11";
@X=("%r12","%r13","%r14");
$sp="%r15";
-$frame=160+16*4;
+$stdframe=16*$SIZE_T+4*8;
+$frame=$stdframe+16*4;
sub Xupdate {
my $i=shift;
$code.=<<___ if ($i==15);
- lg $prefetch,160($sp) ### Xupdate(16) warm-up
+ lg $prefetch,$stdframe($sp) ### Xupdate(16) warm-up
lr $X[0],$X[2]
___
return if ($i&1); # Xupdate is vectorized and executed every 2nd cycle
@@ -58,8 +78,8 @@ $code.=<<___ if ($i<16);
___
$code.=<<___ if ($i>=16);
xgr $X[0],$prefetch ### Xupdate($i)
- lg $prefetch,`160+4*(($i+2)%16)`($sp)
- xg $X[0],`160+4*(($i+8)%16)`($sp)
+ lg $prefetch,`$stdframe+4*(($i+2)%16)`($sp)
+ xg $X[0],`$stdframe+4*(($i+8)%16)`($sp)
xgr $X[0],$prefetch
rll $X[0],$X[0],1
rllg $X[1],$X[0],32
@@ -68,7 +88,7 @@ $code.=<<___ if ($i>=16);
lr $X[2],$X[1] # feedback
___
$code.=<<___ if ($i<=70);
- stg $X[0],`160+4*($i%16)`($sp)
+ stg $X[0],`$stdframe+4*($i%16)`($sp)
___
unshift(@X,pop(@X));
}
@@ -148,9 +168,9 @@ $code.=<<___ if ($kimdfunc);
tmhl %r0,0x4000 # check for message-security assist
jz .Lsoftware
lghi %r0,0
- la %r1,16($sp)
+ la %r1,`2*$SIZE_T`($sp)
.long 0xb93e0002 # kimd %r0,%r2
- lg %r0,16($sp)
+ lg %r0,`2*$SIZE_T`($sp)
tmhh %r0,`0x8000>>$kimdfunc`
jz .Lsoftware
lghi %r0,$kimdfunc
@@ -165,11 +185,11 @@ $code.=<<___ if ($kimdfunc);
___
$code.=<<___;
lghi %r1,-$frame
- stg $ctx,16($sp)
- stmg %r6,%r15,48($sp)
+ st${g} $ctx,`2*$SIZE_T`($sp)
+ stm${g} %r6,%r15,`6*$SIZE_T`($sp)
lgr %r0,$sp
la $sp,0(%r1,$sp)
- stg %r0,0($sp)
+ st${g} %r0,0($sp)
larl $t0,Ktable
llgf $A,0($ctx)
@@ -199,7 +219,7 @@ ___
for (;$i<80;$i++) { &BODY_20_39($i,@V); unshift(@V,pop(@V)); }
$code.=<<___;
- lg $ctx,`$frame+16`($sp)
+ l${g} $ctx,`$frame+2*$SIZE_T`($sp)
la $inp,64($inp)
al $A,0($ctx)
al $B,4($ctx)
@@ -211,13 +231,13 @@ $code.=<<___;
st $C,8($ctx)
st $D,12($ctx)
st $E,16($ctx)
- brct $len,.Lloop
+ brct${g} $len,.Lloop
- lmg %r6,%r15,`$frame+48`($sp)
+ lm${g} %r6,%r15,`$frame+6*$SIZE_T`($sp)
br %r14
.size sha1_block_data_order,.-sha1_block_data_order
.string "SHA1 block transform for s390x, CRYPTOGAMS by <appro\@openssl.org>"
-.comm OPENSSL_s390xcap_P,8,8
+.comm OPENSSL_s390xcap_P,16,8
___
$code =~ s/\`([^\`]*)\`/eval $1/gem;
diff --git a/openssl/crypto/sha/asm/sha1-x86_64.pl b/openssl/crypto/sha/asm/sha1-x86_64.pl
index 4edc5ea9a..f27c1e3fb 100644
--- a/openssl/crypto/sha/asm/sha1-x86_64.pl
+++ b/openssl/crypto/sha/asm/sha1-x86_64.pl
@@ -16,7 +16,7 @@
# There was suggestion to mechanically translate 32-bit code, but I
# dismissed it, reasoning that x86_64 offers enough register bank
# capacity to fully utilize SHA-1 parallelism. Therefore this fresh
-# implementation:-) However! While 64-bit code does performs better
+# implementation:-) However! While 64-bit code does perform better
# on Opteron, I failed to beat 32-bit assembler on EM64T core. Well,
# x86_64 does offer larger *addressable* bank, but out-of-order core
# reaches for even more registers through dynamic aliasing, and EM64T
@@ -29,6 +29,38 @@
# Xeon P4 +65% +0% 9.9
# Core2 +60% +10% 7.0
+# August 2009.
+#
+# The code was revised to minimize code size and to maximize
+# "distance" between instructions producing input to 'lea'
+# instruction and the 'lea' instruction itself, which is essential
+# for Intel Atom core.
+
+# October 2010.
+#
+# Add SSSE3, Supplemental[!] SSE3, implementation. The idea behind it
+# is to offload message schedule denoted by Wt in NIST specification,
+# or Xupdate in OpenSSL source, to SIMD unit. See sha1-586.pl module
+# for background and implementation details. The only difference from
+# 32-bit code is that 64-bit code doesn't have to spill @X[] elements
+# to free temporary registers.
+
+# April 2011.
+#
+# Add AVX code path. See sha1-586.pl for further information.
+
+######################################################################
+# Current performance is summarized in following table. Numbers are
+# CPU clock cycles spent to process single byte (less is better).
+#
+# x86_64 SSSE3 AVX
+# P4 9.8 -
+# Opteron 6.6 -
+# Core2 6.7 6.1/+10% -
+# Atom 11.0 9.7/+13% -
+# Westmere 7.1 5.6/+27% -
+# Sandy Bridge 7.9 6.3/+25% 5.2/+51%
+
$flavour = shift;
$output = shift;
if ($flavour =~ /\./) { $output = $flavour; undef $flavour; }
@@ -40,6 +72,16 @@ $0 =~ m/(.*[\/\\])[^\/\\]+$/; $dir=$1;
( $xlate="${dir}../../perlasm/x86_64-xlate.pl" and -f $xlate) or
die "can't locate x86_64-xlate.pl";
+$avx=1 if (`$ENV{CC} -Wa,-v -c -o /dev/null -x assembler /dev/null 2>&1`
+ =~ /GNU assembler version ([2-9]\.[0-9]+)/ &&
+ $1>=2.19);
+$avx=1 if (!$avx && $win64 && ($flavour =~ /nasm/ || $ENV{ASM} =~ /nasm/) &&
+ `nasm -v 2>&1` =~ /NASM version ([2-9]\.[0-9]+)/ &&
+ $1>=2.09);
+$avx=1 if (!$avx && $win64 && ($flavour =~ /masm/ || $ENV{ASM} =~ /ml64/) &&
+ `ml64 2>&1` =~ /Version ([0-9]+)\./ &&
+ $1>=10);
+
open STDOUT,"| $^X $xlate $flavour $output";
$ctx="%rdi"; # 1st arg
@@ -51,196 +93,994 @@ $ctx="%r8";
$inp="%r9";
$num="%r10";
-$xi="%eax";
-$t0="%ebx";
-$t1="%ecx";
-$A="%edx";
-$B="%esi";
-$C="%edi";
-$D="%ebp";
-$E="%r11d";
-$T="%r12d";
-
-@V=($A,$B,$C,$D,$E,$T);
+$t0="%eax";
+$t1="%ebx";
+$t2="%ecx";
+@xi=("%edx","%ebp");
+$A="%esi";
+$B="%edi";
+$C="%r11d";
+$D="%r12d";
+$E="%r13d";
-sub PROLOGUE {
-my $func=shift;
-$code.=<<___;
-.globl $func
-.type $func,\@function,3
-.align 16
-$func:
- push %rbx
- push %rbp
- push %r12
- mov %rsp,%r11
- mov %rdi,$ctx # reassigned argument
- sub \$`8+16*4`,%rsp
- mov %rsi,$inp # reassigned argument
- and \$-64,%rsp
- mov %rdx,$num # reassigned argument
- mov %r11,`16*4`(%rsp)
-.Lprologue:
-
- mov 0($ctx),$A
- mov 4($ctx),$B
- mov 8($ctx),$C
- mov 12($ctx),$D
- mov 16($ctx),$E
-___
-}
-
-sub EPILOGUE {
-my $func=shift;
-$code.=<<___;
- mov `16*4`(%rsp),%rsi
- mov (%rsi),%r12
- mov 8(%rsi),%rbp
- mov 16(%rsi),%rbx
- lea 24(%rsi),%rsp
-.Lepilogue:
- ret
-.size $func,.-$func
-___
-}
+@V=($A,$B,$C,$D,$E);
sub BODY_00_19 {
-my ($i,$a,$b,$c,$d,$e,$f,$host)=@_;
+my ($i,$a,$b,$c,$d,$e)=@_;
my $j=$i+1;
$code.=<<___ if ($i==0);
- mov `4*$i`($inp),$xi
- `"bswap $xi" if(!defined($host))`
- mov $xi,`4*$i`(%rsp)
+ mov `4*$i`($inp),$xi[0]
+ bswap $xi[0]
+ mov $xi[0],`4*$i`(%rsp)
___
$code.=<<___ if ($i<15);
- lea 0x5a827999($xi,$e),$f
mov $c,$t0
- mov `4*$j`($inp),$xi
- mov $a,$e
+ mov `4*$j`($inp),$xi[1]
+ mov $a,$t2
xor $d,$t0
- `"bswap $xi" if(!defined($host))`
- rol \$5,$e
+ bswap $xi[1]
+ rol \$5,$t2
+ lea 0x5a827999($xi[0],$e),$e
and $b,$t0
- mov $xi,`4*$j`(%rsp)
- add $e,$f
+ mov $xi[1],`4*$j`(%rsp)
+ add $t2,$e
xor $d,$t0
rol \$30,$b
- add $t0,$f
+ add $t0,$e
___
$code.=<<___ if ($i>=15);
- lea 0x5a827999($xi,$e),$f
- mov `4*($j%16)`(%rsp),$xi
+ mov `4*($j%16)`(%rsp),$xi[1]
mov $c,$t0
- mov $a,$e
- xor `4*(($j+2)%16)`(%rsp),$xi
+ mov $a,$t2
+ xor `4*(($j+2)%16)`(%rsp),$xi[1]
xor $d,$t0
- rol \$5,$e
- xor `4*(($j+8)%16)`(%rsp),$xi
+ rol \$5,$t2
+ xor `4*(($j+8)%16)`(%rsp),$xi[1]
and $b,$t0
- add $e,$f
- xor `4*(($j+13)%16)`(%rsp),$xi
+ lea 0x5a827999($xi[0],$e),$e
+ xor `4*(($j+13)%16)`(%rsp),$xi[1]
xor $d,$t0
+ rol \$1,$xi[1]
+ add $t2,$e
rol \$30,$b
- add $t0,$f
- rol \$1,$xi
- mov $xi,`4*($j%16)`(%rsp)
+ mov $xi[1],`4*($j%16)`(%rsp)
+ add $t0,$e
___
+unshift(@xi,pop(@xi));
}
sub BODY_20_39 {
-my ($i,$a,$b,$c,$d,$e,$f)=@_;
+my ($i,$a,$b,$c,$d,$e)=@_;
my $j=$i+1;
my $K=($i<40)?0x6ed9eba1:0xca62c1d6;
$code.=<<___ if ($i<79);
- lea $K($xi,$e),$f
- mov `4*($j%16)`(%rsp),$xi
+ mov `4*($j%16)`(%rsp),$xi[1]
mov $c,$t0
- mov $a,$e
- xor `4*(($j+2)%16)`(%rsp),$xi
+ mov $a,$t2
+ xor `4*(($j+2)%16)`(%rsp),$xi[1]
xor $b,$t0
- rol \$5,$e
- xor `4*(($j+8)%16)`(%rsp),$xi
+ rol \$5,$t2
+ lea $K($xi[0],$e),$e
+ xor `4*(($j+8)%16)`(%rsp),$xi[1]
xor $d,$t0
- add $e,$f
- xor `4*(($j+13)%16)`(%rsp),$xi
+ add $t2,$e
+ xor `4*(($j+13)%16)`(%rsp),$xi[1]
rol \$30,$b
- add $t0,$f
- rol \$1,$xi
+ add $t0,$e
+ rol \$1,$xi[1]
___
$code.=<<___ if ($i<76);
- mov $xi,`4*($j%16)`(%rsp)
+ mov $xi[1],`4*($j%16)`(%rsp)
___
$code.=<<___ if ($i==79);
- lea $K($xi,$e),$f
mov $c,$t0
- mov $a,$e
+ mov $a,$t2
xor $b,$t0
- rol \$5,$e
+ lea $K($xi[0],$e),$e
+ rol \$5,$t2
xor $d,$t0
- add $e,$f
+ add $t2,$e
rol \$30,$b
- add $t0,$f
+ add $t0,$e
___
+unshift(@xi,pop(@xi));
}
sub BODY_40_59 {
-my ($i,$a,$b,$c,$d,$e,$f)=@_;
+my ($i,$a,$b,$c,$d,$e)=@_;
my $j=$i+1;
$code.=<<___;
- lea 0x8f1bbcdc($xi,$e),$f
- mov `4*($j%16)`(%rsp),$xi
- mov $b,$t0
- mov $b,$t1
- xor `4*(($j+2)%16)`(%rsp),$xi
- mov $a,$e
- and $c,$t0
- xor `4*(($j+8)%16)`(%rsp),$xi
- or $c,$t1
- rol \$5,$e
- xor `4*(($j+13)%16)`(%rsp),$xi
- and $d,$t1
- add $e,$f
- rol \$1,$xi
- or $t1,$t0
+ mov `4*($j%16)`(%rsp),$xi[1]
+ mov $c,$t0
+ mov $c,$t1
+ xor `4*(($j+2)%16)`(%rsp),$xi[1]
+ and $d,$t0
+ mov $a,$t2
+ xor `4*(($j+8)%16)`(%rsp),$xi[1]
+ xor $d,$t1
+ lea 0x8f1bbcdc($xi[0],$e),$e
+ rol \$5,$t2
+ xor `4*(($j+13)%16)`(%rsp),$xi[1]
+ add $t0,$e
+ and $b,$t1
+ rol \$1,$xi[1]
+ add $t1,$e
rol \$30,$b
- mov $xi,`4*($j%16)`(%rsp)
- add $t0,$f
+ mov $xi[1],`4*($j%16)`(%rsp)
+ add $t2,$e
___
+unshift(@xi,pop(@xi));
}
-$code=".text\n";
+$code.=<<___;
+.text
+.extern OPENSSL_ia32cap_P
-&PROLOGUE("sha1_block_data_order");
-$code.=".align 4\n.Lloop:\n";
+.globl sha1_block_data_order
+.type sha1_block_data_order,\@function,3
+.align 16
+sha1_block_data_order:
+ mov OPENSSL_ia32cap_P+0(%rip),%r9d
+ mov OPENSSL_ia32cap_P+4(%rip),%r8d
+ test \$`1<<9`,%r8d # check SSSE3 bit
+ jz .Lialu
+___
+$code.=<<___ if ($avx);
+ and \$`1<<28`,%r8d # mask AVX bit
+ and \$`1<<30`,%r9d # mask "Intel CPU" bit
+ or %r9d,%r8d
+ cmp \$`1<<28|1<<30`,%r8d
+ je _avx_shortcut
+___
+$code.=<<___;
+ jmp _ssse3_shortcut
+
+.align 16
+.Lialu:
+ push %rbx
+ push %rbp
+ push %r12
+ push %r13
+ mov %rsp,%r11
+ mov %rdi,$ctx # reassigned argument
+ sub \$`8+16*4`,%rsp
+ mov %rsi,$inp # reassigned argument
+ and \$-64,%rsp
+ mov %rdx,$num # reassigned argument
+ mov %r11,`16*4`(%rsp)
+.Lprologue:
+
+ mov 0($ctx),$A
+ mov 4($ctx),$B
+ mov 8($ctx),$C
+ mov 12($ctx),$D
+ mov 16($ctx),$E
+ jmp .Lloop
+
+.align 16
+.Lloop:
+___
for($i=0;$i<20;$i++) { &BODY_00_19($i,@V); unshift(@V,pop(@V)); }
for(;$i<40;$i++) { &BODY_20_39($i,@V); unshift(@V,pop(@V)); }
for(;$i<60;$i++) { &BODY_40_59($i,@V); unshift(@V,pop(@V)); }
for(;$i<80;$i++) { &BODY_20_39($i,@V); unshift(@V,pop(@V)); }
$code.=<<___;
- add 0($ctx),$E
- add 4($ctx),$T
- add 8($ctx),$A
- add 12($ctx),$B
- add 16($ctx),$C
- mov $E,0($ctx)
- mov $T,4($ctx)
- mov $A,8($ctx)
- mov $B,12($ctx)
- mov $C,16($ctx)
-
- xchg $E,$A # mov $E,$A
- xchg $T,$B # mov $T,$B
- xchg $E,$C # mov $A,$C
- xchg $T,$D # mov $B,$D
- # mov $C,$E
- lea `16*4`($inp),$inp
+ add 0($ctx),$A
+ add 4($ctx),$B
+ add 8($ctx),$C
+ add 12($ctx),$D
+ add 16($ctx),$E
+ mov $A,0($ctx)
+ mov $B,4($ctx)
+ mov $C,8($ctx)
+ mov $D,12($ctx)
+ mov $E,16($ctx)
+
sub \$1,$num
+ lea `16*4`($inp),$inp
jnz .Lloop
+
+ mov `16*4`(%rsp),%rsi
+ mov (%rsi),%r13
+ mov 8(%rsi),%r12
+ mov 16(%rsi),%rbp
+ mov 24(%rsi),%rbx
+ lea 32(%rsi),%rsp
+.Lepilogue:
+ ret
+.size sha1_block_data_order,.-sha1_block_data_order
___
-&EPILOGUE("sha1_block_data_order");
+{{{
+my $Xi=4;
+my @X=map("%xmm$_",(4..7,0..3));
+my @Tx=map("%xmm$_",(8..10));
+my @V=($A,$B,$C,$D,$E)=("%eax","%ebx","%ecx","%edx","%ebp"); # size optimization
+my @T=("%esi","%edi");
+my $j=0;
+my $K_XX_XX="%r11";
+
+my $_rol=sub { &rol(@_) };
+my $_ror=sub { &ror(@_) };
+
+$code.=<<___;
+.type sha1_block_data_order_ssse3,\@function,3
+.align 16
+sha1_block_data_order_ssse3:
+_ssse3_shortcut:
+ push %rbx
+ push %rbp
+ push %r12
+ lea `-64-($win64?5*16:0)`(%rsp),%rsp
+___
+$code.=<<___ if ($win64);
+ movaps %xmm6,64+0(%rsp)
+ movaps %xmm7,64+16(%rsp)
+ movaps %xmm8,64+32(%rsp)
+ movaps %xmm9,64+48(%rsp)
+ movaps %xmm10,64+64(%rsp)
+.Lprologue_ssse3:
+___
+$code.=<<___;
+ mov %rdi,$ctx # reassigned argument
+ mov %rsi,$inp # reassigned argument
+ mov %rdx,$num # reassigned argument
+
+ shl \$6,$num
+ add $inp,$num
+ lea K_XX_XX(%rip),$K_XX_XX
+
+ mov 0($ctx),$A # load context
+ mov 4($ctx),$B
+ mov 8($ctx),$C
+ mov 12($ctx),$D
+ mov $B,@T[0] # magic seed
+ mov 16($ctx),$E
+
+ movdqa 64($K_XX_XX),@X[2] # pbswap mask
+ movdqa 0($K_XX_XX),@Tx[1] # K_00_19
+ movdqu 0($inp),@X[-4&7] # load input to %xmm[0-3]
+ movdqu 16($inp),@X[-3&7]
+ movdqu 32($inp),@X[-2&7]
+ movdqu 48($inp),@X[-1&7]
+ pshufb @X[2],@X[-4&7] # byte swap
+ add \$64,$inp
+ pshufb @X[2],@X[-3&7]
+ pshufb @X[2],@X[-2&7]
+ pshufb @X[2],@X[-1&7]
+ paddd @Tx[1],@X[-4&7] # add K_00_19
+ paddd @Tx[1],@X[-3&7]
+ paddd @Tx[1],@X[-2&7]
+ movdqa @X[-4&7],0(%rsp) # X[]+K xfer to IALU
+ psubd @Tx[1],@X[-4&7] # restore X[]
+ movdqa @X[-3&7],16(%rsp)
+ psubd @Tx[1],@X[-3&7]
+ movdqa @X[-2&7],32(%rsp)
+ psubd @Tx[1],@X[-2&7]
+ jmp .Loop_ssse3
+___
+
+sub AUTOLOAD() # thunk [simplified] 32-bit style perlasm
+{ my $opcode = $AUTOLOAD; $opcode =~ s/.*:://;
+ my $arg = pop;
+ $arg = "\$$arg" if ($arg*1 eq $arg);
+ $code .= "\t$opcode\t".join(',',$arg,reverse @_)."\n";
+}
+
+sub Xupdate_ssse3_16_31() # recall that $Xi starts wtih 4
+{ use integer;
+ my $body = shift;
+ my @insns = (&$body,&$body,&$body,&$body); # 40 instructions
+ my ($a,$b,$c,$d,$e);
+
+ &movdqa (@X[0],@X[-3&7]);
+ eval(shift(@insns));
+ eval(shift(@insns));
+ &movdqa (@Tx[0],@X[-1&7]);
+ &palignr(@X[0],@X[-4&7],8); # compose "X[-14]" in "X[0]"
+ eval(shift(@insns));
+ eval(shift(@insns));
+
+ &paddd (@Tx[1],@X[-1&7]);
+ eval(shift(@insns));
+ eval(shift(@insns));
+ &psrldq (@Tx[0],4); # "X[-3]", 3 dwords
+ eval(shift(@insns));
+ eval(shift(@insns));
+ &pxor (@X[0],@X[-4&7]); # "X[0]"^="X[-16]"
+ eval(shift(@insns));
+ eval(shift(@insns));
+
+ &pxor (@Tx[0],@X[-2&7]); # "X[-3]"^"X[-8]"
+ eval(shift(@insns));
+ eval(shift(@insns));
+ eval(shift(@insns));
+ eval(shift(@insns));
+
+ &pxor (@X[0],@Tx[0]); # "X[0]"^="X[-3]"^"X[-8]"
+ eval(shift(@insns));
+ eval(shift(@insns));
+ &movdqa (eval(16*(($Xi-1)&3))."(%rsp)",@Tx[1]); # X[]+K xfer to IALU
+ eval(shift(@insns));
+ eval(shift(@insns));
+
+ &movdqa (@Tx[2],@X[0]);
+ &movdqa (@Tx[0],@X[0]);
+ eval(shift(@insns));
+ eval(shift(@insns));
+ eval(shift(@insns));
+ eval(shift(@insns));
+
+ &pslldq (@Tx[2],12); # "X[0]"<<96, extract one dword
+ &paddd (@X[0],@X[0]);
+ eval(shift(@insns));
+ eval(shift(@insns));
+ eval(shift(@insns));
+ eval(shift(@insns));
+
+ &psrld (@Tx[0],31);
+ eval(shift(@insns));
+ eval(shift(@insns));
+ &movdqa (@Tx[1],@Tx[2]);
+ eval(shift(@insns));
+ eval(shift(@insns));
+
+ &psrld (@Tx[2],30);
+ &por (@X[0],@Tx[0]); # "X[0]"<<<=1
+ eval(shift(@insns));
+ eval(shift(@insns));
+ eval(shift(@insns));
+ eval(shift(@insns));
+
+ &pslld (@Tx[1],2);
+ &pxor (@X[0],@Tx[2]);
+ eval(shift(@insns));
+ eval(shift(@insns));
+ &movdqa (@Tx[2],eval(16*(($Xi)/5))."($K_XX_XX)"); # K_XX_XX
+ eval(shift(@insns));
+ eval(shift(@insns));
+
+ &pxor (@X[0],@Tx[1]); # "X[0]"^=("X[0]">>96)<<<2
+
+ foreach (@insns) { eval; } # remaining instructions [if any]
+
+ $Xi++; push(@X,shift(@X)); # "rotate" X[]
+ push(@Tx,shift(@Tx));
+}
+
+sub Xupdate_ssse3_32_79()
+{ use integer;
+ my $body = shift;
+ my @insns = (&$body,&$body,&$body,&$body); # 32 to 48 instructions
+ my ($a,$b,$c,$d,$e);
+
+ &movdqa (@Tx[0],@X[-1&7]) if ($Xi==8);
+ eval(shift(@insns)); # body_20_39
+ &pxor (@X[0],@X[-4&7]); # "X[0]"="X[-32]"^"X[-16]"
+ &palignr(@Tx[0],@X[-2&7],8); # compose "X[-6]"
+ eval(shift(@insns));
+ eval(shift(@insns));
+ eval(shift(@insns)); # rol
+
+ &pxor (@X[0],@X[-7&7]); # "X[0]"^="X[-28]"
+ eval(shift(@insns));
+ eval(shift(@insns)) if (@insns[0] !~ /&ro[rl]/);
+ if ($Xi%5) {
+ &movdqa (@Tx[2],@Tx[1]);# "perpetuate" K_XX_XX...
+ } else { # ... or load next one
+ &movdqa (@Tx[2],eval(16*($Xi/5))."($K_XX_XX)");
+ }
+ &paddd (@Tx[1],@X[-1&7]);
+ eval(shift(@insns)); # ror
+ eval(shift(@insns));
+
+ &pxor (@X[0],@Tx[0]); # "X[0]"^="X[-6]"
+ eval(shift(@insns)); # body_20_39
+ eval(shift(@insns));
+ eval(shift(@insns));
+ eval(shift(@insns)); # rol
+
+ &movdqa (@Tx[0],@X[0]);
+ &movdqa (eval(16*(($Xi-1)&3))."(%rsp)",@Tx[1]); # X[]+K xfer to IALU
+ eval(shift(@insns));
+ eval(shift(@insns));
+ eval(shift(@insns)); # ror
+ eval(shift(@insns));
+
+ &pslld (@X[0],2);
+ eval(shift(@insns)); # body_20_39
+ eval(shift(@insns));
+ &psrld (@Tx[0],30);
+ eval(shift(@insns));
+ eval(shift(@insns)); # rol
+ eval(shift(@insns));
+ eval(shift(@insns));
+ eval(shift(@insns)); # ror
+ eval(shift(@insns));
+
+ &por (@X[0],@Tx[0]); # "X[0]"<<<=2
+ eval(shift(@insns)); # body_20_39
+ eval(shift(@insns));
+ &movdqa (@Tx[1],@X[0]) if ($Xi<19);
+ eval(shift(@insns));
+ eval(shift(@insns)); # rol
+ eval(shift(@insns));
+ eval(shift(@insns));
+ eval(shift(@insns)); # rol
+ eval(shift(@insns));
+
+ foreach (@insns) { eval; } # remaining instructions
+
+ $Xi++; push(@X,shift(@X)); # "rotate" X[]
+ push(@Tx,shift(@Tx));
+}
+
+sub Xuplast_ssse3_80()
+{ use integer;
+ my $body = shift;
+ my @insns = (&$body,&$body,&$body,&$body); # 32 instructions
+ my ($a,$b,$c,$d,$e);
+
+ eval(shift(@insns));
+ &paddd (@Tx[1],@X[-1&7]);
+ eval(shift(@insns));
+ eval(shift(@insns));
+ eval(shift(@insns));
+ eval(shift(@insns));
+
+ &movdqa (eval(16*(($Xi-1)&3))."(%rsp)",@Tx[1]); # X[]+K xfer IALU
+
+ foreach (@insns) { eval; } # remaining instructions
+
+ &cmp ($inp,$num);
+ &je (".Ldone_ssse3");
+
+ unshift(@Tx,pop(@Tx));
+
+ &movdqa (@X[2],"64($K_XX_XX)"); # pbswap mask
+ &movdqa (@Tx[1],"0($K_XX_XX)"); # K_00_19
+ &movdqu (@X[-4&7],"0($inp)"); # load input
+ &movdqu (@X[-3&7],"16($inp)");
+ &movdqu (@X[-2&7],"32($inp)");
+ &movdqu (@X[-1&7],"48($inp)");
+ &pshufb (@X[-4&7],@X[2]); # byte swap
+ &add ($inp,64);
+
+ $Xi=0;
+}
+
+sub Xloop_ssse3()
+{ use integer;
+ my $body = shift;
+ my @insns = (&$body,&$body,&$body,&$body); # 32 instructions
+ my ($a,$b,$c,$d,$e);
+
+ eval(shift(@insns));
+ eval(shift(@insns));
+ &pshufb (@X[($Xi-3)&7],@X[2]);
+ eval(shift(@insns));
+ eval(shift(@insns));
+ &paddd (@X[($Xi-4)&7],@Tx[1]);
+ eval(shift(@insns));
+ eval(shift(@insns));
+ eval(shift(@insns));
+ eval(shift(@insns));
+ &movdqa (eval(16*$Xi)."(%rsp)",@X[($Xi-4)&7]); # X[]+K xfer to IALU
+ eval(shift(@insns));
+ eval(shift(@insns));
+ &psubd (@X[($Xi-4)&7],@Tx[1]);
+
+ foreach (@insns) { eval; }
+ $Xi++;
+}
+
+sub Xtail_ssse3()
+{ use integer;
+ my $body = shift;
+ my @insns = (&$body,&$body,&$body,&$body); # 32 instructions
+ my ($a,$b,$c,$d,$e);
+
+ foreach (@insns) { eval; }
+}
+
+sub body_00_19 () {
+ (
+ '($a,$b,$c,$d,$e)=@V;'.
+ '&add ($e,eval(4*($j&15))."(%rsp)");', # X[]+K xfer
+ '&xor ($c,$d);',
+ '&mov (@T[1],$a);', # $b in next round
+ '&$_rol ($a,5);',
+ '&and (@T[0],$c);', # ($b&($c^$d))
+ '&xor ($c,$d);', # restore $c
+ '&xor (@T[0],$d);',
+ '&add ($e,$a);',
+ '&$_ror ($b,$j?7:2);', # $b>>>2
+ '&add ($e,@T[0]);' .'$j++; unshift(@V,pop(@V)); unshift(@T,pop(@T));'
+ );
+}
+
+sub body_20_39 () {
+ (
+ '($a,$b,$c,$d,$e)=@V;'.
+ '&add ($e,eval(4*($j++&15))."(%rsp)");', # X[]+K xfer
+ '&xor (@T[0],$d);', # ($b^$d)
+ '&mov (@T[1],$a);', # $b in next round
+ '&$_rol ($a,5);',
+ '&xor (@T[0],$c);', # ($b^$d^$c)
+ '&add ($e,$a);',
+ '&$_ror ($b,7);', # $b>>>2
+ '&add ($e,@T[0]);' .'unshift(@V,pop(@V)); unshift(@T,pop(@T));'
+ );
+}
+
+sub body_40_59 () {
+ (
+ '($a,$b,$c,$d,$e)=@V;'.
+ '&mov (@T[1],$c);',
+ '&xor ($c,$d);',
+ '&add ($e,eval(4*($j++&15))."(%rsp)");', # X[]+K xfer
+ '&and (@T[1],$d);',
+ '&and (@T[0],$c);', # ($b&($c^$d))
+ '&$_ror ($b,7);', # $b>>>2
+ '&add ($e,@T[1]);',
+ '&mov (@T[1],$a);', # $b in next round
+ '&$_rol ($a,5);',
+ '&add ($e,@T[0]);',
+ '&xor ($c,$d);', # restore $c
+ '&add ($e,$a);' .'unshift(@V,pop(@V)); unshift(@T,pop(@T));'
+ );
+}
$code.=<<___;
-.asciz "SHA1 block transform for x86_64, CRYPTOGAMS by <appro\@openssl.org>"
.align 16
+.Loop_ssse3:
+___
+ &Xupdate_ssse3_16_31(\&body_00_19);
+ &Xupdate_ssse3_16_31(\&body_00_19);
+ &Xupdate_ssse3_16_31(\&body_00_19);
+ &Xupdate_ssse3_16_31(\&body_00_19);
+ &Xupdate_ssse3_32_79(\&body_00_19);
+ &Xupdate_ssse3_32_79(\&body_20_39);
+ &Xupdate_ssse3_32_79(\&body_20_39);
+ &Xupdate_ssse3_32_79(\&body_20_39);
+ &Xupdate_ssse3_32_79(\&body_20_39);
+ &Xupdate_ssse3_32_79(\&body_20_39);
+ &Xupdate_ssse3_32_79(\&body_40_59);
+ &Xupdate_ssse3_32_79(\&body_40_59);
+ &Xupdate_ssse3_32_79(\&body_40_59);
+ &Xupdate_ssse3_32_79(\&body_40_59);
+ &Xupdate_ssse3_32_79(\&body_40_59);
+ &Xupdate_ssse3_32_79(\&body_20_39);
+ &Xuplast_ssse3_80(\&body_20_39); # can jump to "done"
+
+ $saved_j=$j; @saved_V=@V;
+
+ &Xloop_ssse3(\&body_20_39);
+ &Xloop_ssse3(\&body_20_39);
+ &Xloop_ssse3(\&body_20_39);
+
+$code.=<<___;
+ add 0($ctx),$A # update context
+ add 4($ctx),@T[0]
+ add 8($ctx),$C
+ add 12($ctx),$D
+ mov $A,0($ctx)
+ add 16($ctx),$E
+ mov @T[0],4($ctx)
+ mov @T[0],$B # magic seed
+ mov $C,8($ctx)
+ mov $D,12($ctx)
+ mov $E,16($ctx)
+ jmp .Loop_ssse3
+
+.align 16
+.Ldone_ssse3:
+___
+ $j=$saved_j; @V=@saved_V;
+
+ &Xtail_ssse3(\&body_20_39);
+ &Xtail_ssse3(\&body_20_39);
+ &Xtail_ssse3(\&body_20_39);
+
+$code.=<<___;
+ add 0($ctx),$A # update context
+ add 4($ctx),@T[0]
+ add 8($ctx),$C
+ mov $A,0($ctx)
+ add 12($ctx),$D
+ mov @T[0],4($ctx)
+ add 16($ctx),$E
+ mov $C,8($ctx)
+ mov $D,12($ctx)
+ mov $E,16($ctx)
+___
+$code.=<<___ if ($win64);
+ movaps 64+0(%rsp),%xmm6
+ movaps 64+16(%rsp),%xmm7
+ movaps 64+32(%rsp),%xmm8
+ movaps 64+48(%rsp),%xmm9
+ movaps 64+64(%rsp),%xmm10
+___
+$code.=<<___;
+ lea `64+($win64?5*16:0)`(%rsp),%rsi
+ mov 0(%rsi),%r12
+ mov 8(%rsi),%rbp
+ mov 16(%rsi),%rbx
+ lea 24(%rsi),%rsp
+.Lepilogue_ssse3:
+ ret
+.size sha1_block_data_order_ssse3,.-sha1_block_data_order_ssse3
+___
+
+if ($avx) {
+my $Xi=4;
+my @X=map("%xmm$_",(4..7,0..3));
+my @Tx=map("%xmm$_",(8..10));
+my @V=($A,$B,$C,$D,$E)=("%eax","%ebx","%ecx","%edx","%ebp"); # size optimization
+my @T=("%esi","%edi");
+my $j=0;
+my $K_XX_XX="%r11";
+
+my $_rol=sub { &shld(@_[0],@_) };
+my $_ror=sub { &shrd(@_[0],@_) };
+
+$code.=<<___;
+.type sha1_block_data_order_avx,\@function,3
+.align 16
+sha1_block_data_order_avx:
+_avx_shortcut:
+ push %rbx
+ push %rbp
+ push %r12
+ lea `-64-($win64?5*16:0)`(%rsp),%rsp
+___
+$code.=<<___ if ($win64);
+ movaps %xmm6,64+0(%rsp)
+ movaps %xmm7,64+16(%rsp)
+ movaps %xmm8,64+32(%rsp)
+ movaps %xmm9,64+48(%rsp)
+ movaps %xmm10,64+64(%rsp)
+.Lprologue_avx:
+___
+$code.=<<___;
+ mov %rdi,$ctx # reassigned argument
+ mov %rsi,$inp # reassigned argument
+ mov %rdx,$num # reassigned argument
+ vzeroall
+
+ shl \$6,$num
+ add $inp,$num
+ lea K_XX_XX(%rip),$K_XX_XX
+
+ mov 0($ctx),$A # load context
+ mov 4($ctx),$B
+ mov 8($ctx),$C
+ mov 12($ctx),$D
+ mov $B,@T[0] # magic seed
+ mov 16($ctx),$E
+
+ vmovdqa 64($K_XX_XX),@X[2] # pbswap mask
+ vmovdqa 0($K_XX_XX),@Tx[1] # K_00_19
+ vmovdqu 0($inp),@X[-4&7] # load input to %xmm[0-3]
+ vmovdqu 16($inp),@X[-3&7]
+ vmovdqu 32($inp),@X[-2&7]
+ vmovdqu 48($inp),@X[-1&7]
+ vpshufb @X[2],@X[-4&7],@X[-4&7] # byte swap
+ add \$64,$inp
+ vpshufb @X[2],@X[-3&7],@X[-3&7]
+ vpshufb @X[2],@X[-2&7],@X[-2&7]
+ vpshufb @X[2],@X[-1&7],@X[-1&7]
+ vpaddd @Tx[1],@X[-4&7],@X[0] # add K_00_19
+ vpaddd @Tx[1],@X[-3&7],@X[1]
+ vpaddd @Tx[1],@X[-2&7],@X[2]
+ vmovdqa @X[0],0(%rsp) # X[]+K xfer to IALU
+ vmovdqa @X[1],16(%rsp)
+ vmovdqa @X[2],32(%rsp)
+ jmp .Loop_avx
+___
+
+sub Xupdate_avx_16_31() # recall that $Xi starts wtih 4
+{ use integer;
+ my $body = shift;
+ my @insns = (&$body,&$body,&$body,&$body); # 40 instructions
+ my ($a,$b,$c,$d,$e);
+
+ eval(shift(@insns));
+ eval(shift(@insns));
+ &vpalignr(@X[0],@X[-3&7],@X[-4&7],8); # compose "X[-14]" in "X[0]"
+ eval(shift(@insns));
+ eval(shift(@insns));
+
+ &vpaddd (@Tx[1],@Tx[1],@X[-1&7]);
+ eval(shift(@insns));
+ eval(shift(@insns));
+ &vpsrldq(@Tx[0],@X[-1&7],4); # "X[-3]", 3 dwords
+ eval(shift(@insns));
+ eval(shift(@insns));
+ &vpxor (@X[0],@X[0],@X[-4&7]); # "X[0]"^="X[-16]"
+ eval(shift(@insns));
+ eval(shift(@insns));
+
+ &vpxor (@Tx[0],@Tx[0],@X[-2&7]); # "X[-3]"^"X[-8]"
+ eval(shift(@insns));
+ eval(shift(@insns));
+ eval(shift(@insns));
+ eval(shift(@insns));
+
+ &vpxor (@X[0],@X[0],@Tx[0]); # "X[0]"^="X[-3]"^"X[-8]"
+ eval(shift(@insns));
+ eval(shift(@insns));
+ &vmovdqa (eval(16*(($Xi-1)&3))."(%rsp)",@Tx[1]); # X[]+K xfer to IALU
+ eval(shift(@insns));
+ eval(shift(@insns));
+
+ &vpsrld (@Tx[0],@X[0],31);
+ eval(shift(@insns));
+ eval(shift(@insns));
+ eval(shift(@insns));
+ eval(shift(@insns));
+
+ &vpslldq(@Tx[2],@X[0],12); # "X[0]"<<96, extract one dword
+ &vpaddd (@X[0],@X[0],@X[0]);
+ eval(shift(@insns));
+ eval(shift(@insns));
+ eval(shift(@insns));
+ eval(shift(@insns));
+
+ &vpsrld (@Tx[1],@Tx[2],30);
+ &vpor (@X[0],@X[0],@Tx[0]); # "X[0]"<<<=1
+ eval(shift(@insns));
+ eval(shift(@insns));
+ eval(shift(@insns));
+ eval(shift(@insns));
+
+ &vpslld (@Tx[2],@Tx[2],2);
+ &vpxor (@X[0],@X[0],@Tx[1]);
+ eval(shift(@insns));
+ eval(shift(@insns));
+ eval(shift(@insns));
+ eval(shift(@insns));
+
+ &vpxor (@X[0],@X[0],@Tx[2]); # "X[0]"^=("X[0]">>96)<<<2
+ eval(shift(@insns));
+ eval(shift(@insns));
+ &vmovdqa (@Tx[2],eval(16*(($Xi)/5))."($K_XX_XX)"); # K_XX_XX
+ eval(shift(@insns));
+ eval(shift(@insns));
+
+
+ foreach (@insns) { eval; } # remaining instructions [if any]
+
+ $Xi++; push(@X,shift(@X)); # "rotate" X[]
+ push(@Tx,shift(@Tx));
+}
+
+sub Xupdate_avx_32_79()
+{ use integer;
+ my $body = shift;
+ my @insns = (&$body,&$body,&$body,&$body); # 32 to 48 instructions
+ my ($a,$b,$c,$d,$e);
+
+ &vpalignr(@Tx[0],@X[-1&7],@X[-2&7],8); # compose "X[-6]"
+ &vpxor (@X[0],@X[0],@X[-4&7]); # "X[0]"="X[-32]"^"X[-16]"
+ eval(shift(@insns)); # body_20_39
+ eval(shift(@insns));
+ eval(shift(@insns));
+ eval(shift(@insns)); # rol
+
+ &vpxor (@X[0],@X[0],@X[-7&7]); # "X[0]"^="X[-28]"
+ eval(shift(@insns));
+ eval(shift(@insns)) if (@insns[0] !~ /&ro[rl]/);
+ if ($Xi%5) {
+ &vmovdqa (@Tx[2],@Tx[1]);# "perpetuate" K_XX_XX...
+ } else { # ... or load next one
+ &vmovdqa (@Tx[2],eval(16*($Xi/5))."($K_XX_XX)");
+ }
+ &vpaddd (@Tx[1],@Tx[1],@X[-1&7]);
+ eval(shift(@insns)); # ror
+ eval(shift(@insns));
+
+ &vpxor (@X[0],@X[0],@Tx[0]); # "X[0]"^="X[-6]"
+ eval(shift(@insns)); # body_20_39
+ eval(shift(@insns));
+ eval(shift(@insns));
+ eval(shift(@insns)); # rol
+
+ &vpsrld (@Tx[0],@X[0],30);
+ &vmovdqa (eval(16*(($Xi-1)&3))."(%rsp)",@Tx[1]); # X[]+K xfer to IALU
+ eval(shift(@insns));
+ eval(shift(@insns));
+ eval(shift(@insns)); # ror
+ eval(shift(@insns));
+
+ &vpslld (@X[0],@X[0],2);
+ eval(shift(@insns)); # body_20_39
+ eval(shift(@insns));
+ eval(shift(@insns));
+ eval(shift(@insns)); # rol
+ eval(shift(@insns));
+ eval(shift(@insns));
+ eval(shift(@insns)); # ror
+ eval(shift(@insns));
+
+ &vpor (@X[0],@X[0],@Tx[0]); # "X[0]"<<<=2
+ eval(shift(@insns)); # body_20_39
+ eval(shift(@insns));
+ &vmovdqa (@Tx[1],@X[0]) if ($Xi<19);
+ eval(shift(@insns));
+ eval(shift(@insns)); # rol
+ eval(shift(@insns));
+ eval(shift(@insns));
+ eval(shift(@insns)); # rol
+ eval(shift(@insns));
+
+ foreach (@insns) { eval; } # remaining instructions
+
+ $Xi++; push(@X,shift(@X)); # "rotate" X[]
+ push(@Tx,shift(@Tx));
+}
+
+sub Xuplast_avx_80()
+{ use integer;
+ my $body = shift;
+ my @insns = (&$body,&$body,&$body,&$body); # 32 instructions
+ my ($a,$b,$c,$d,$e);
+
+ eval(shift(@insns));
+ &vpaddd (@Tx[1],@Tx[1],@X[-1&7]);
+ eval(shift(@insns));
+ eval(shift(@insns));
+ eval(shift(@insns));
+ eval(shift(@insns));
+
+ &movdqa (eval(16*(($Xi-1)&3))."(%rsp)",@Tx[1]); # X[]+K xfer IALU
+
+ foreach (@insns) { eval; } # remaining instructions
+
+ &cmp ($inp,$num);
+ &je (".Ldone_avx");
+
+ unshift(@Tx,pop(@Tx));
+
+ &vmovdqa(@X[2],"64($K_XX_XX)"); # pbswap mask
+ &vmovdqa(@Tx[1],"0($K_XX_XX)"); # K_00_19
+ &vmovdqu(@X[-4&7],"0($inp)"); # load input
+ &vmovdqu(@X[-3&7],"16($inp)");
+ &vmovdqu(@X[-2&7],"32($inp)");
+ &vmovdqu(@X[-1&7],"48($inp)");
+ &vpshufb(@X[-4&7],@X[-4&7],@X[2]); # byte swap
+ &add ($inp,64);
+
+ $Xi=0;
+}
+
+sub Xloop_avx()
+{ use integer;
+ my $body = shift;
+ my @insns = (&$body,&$body,&$body,&$body); # 32 instructions
+ my ($a,$b,$c,$d,$e);
+
+ eval(shift(@insns));
+ eval(shift(@insns));
+ &vpshufb(@X[($Xi-3)&7],@X[($Xi-3)&7],@X[2]);
+ eval(shift(@insns));
+ eval(shift(@insns));
+ &vpaddd (@X[$Xi&7],@X[($Xi-4)&7],@Tx[1]);
+ eval(shift(@insns));
+ eval(shift(@insns));
+ eval(shift(@insns));
+ eval(shift(@insns));
+ &vmovdqa(eval(16*$Xi)."(%rsp)",@X[$Xi&7]); # X[]+K xfer to IALU
+ eval(shift(@insns));
+ eval(shift(@insns));
+
+ foreach (@insns) { eval; }
+ $Xi++;
+}
+
+sub Xtail_avx()
+{ use integer;
+ my $body = shift;
+ my @insns = (&$body,&$body,&$body,&$body); # 32 instructions
+ my ($a,$b,$c,$d,$e);
+
+ foreach (@insns) { eval; }
+}
+
+$code.=<<___;
+.align 16
+.Loop_avx:
+___
+ &Xupdate_avx_16_31(\&body_00_19);
+ &Xupdate_avx_16_31(\&body_00_19);
+ &Xupdate_avx_16_31(\&body_00_19);
+ &Xupdate_avx_16_31(\&body_00_19);
+ &Xupdate_avx_32_79(\&body_00_19);
+ &Xupdate_avx_32_79(\&body_20_39);
+ &Xupdate_avx_32_79(\&body_20_39);
+ &Xupdate_avx_32_79(\&body_20_39);
+ &Xupdate_avx_32_79(\&body_20_39);
+ &Xupdate_avx_32_79(\&body_20_39);
+ &Xupdate_avx_32_79(\&body_40_59);
+ &Xupdate_avx_32_79(\&body_40_59);
+ &Xupdate_avx_32_79(\&body_40_59);
+ &Xupdate_avx_32_79(\&body_40_59);
+ &Xupdate_avx_32_79(\&body_40_59);
+ &Xupdate_avx_32_79(\&body_20_39);
+ &Xuplast_avx_80(\&body_20_39); # can jump to "done"
+
+ $saved_j=$j; @saved_V=@V;
+
+ &Xloop_avx(\&body_20_39);
+ &Xloop_avx(\&body_20_39);
+ &Xloop_avx(\&body_20_39);
+
+$code.=<<___;
+ add 0($ctx),$A # update context
+ add 4($ctx),@T[0]
+ add 8($ctx),$C
+ add 12($ctx),$D
+ mov $A,0($ctx)
+ add 16($ctx),$E
+ mov @T[0],4($ctx)
+ mov @T[0],$B # magic seed
+ mov $C,8($ctx)
+ mov $D,12($ctx)
+ mov $E,16($ctx)
+ jmp .Loop_avx
+
+.align 16
+.Ldone_avx:
+___
+ $j=$saved_j; @V=@saved_V;
+
+ &Xtail_avx(\&body_20_39);
+ &Xtail_avx(\&body_20_39);
+ &Xtail_avx(\&body_20_39);
+
+$code.=<<___;
+ vzeroall
+
+ add 0($ctx),$A # update context
+ add 4($ctx),@T[0]
+ add 8($ctx),$C
+ mov $A,0($ctx)
+ add 12($ctx),$D
+ mov @T[0],4($ctx)
+ add 16($ctx),$E
+ mov $C,8($ctx)
+ mov $D,12($ctx)
+ mov $E,16($ctx)
+___
+$code.=<<___ if ($win64);
+ movaps 64+0(%rsp),%xmm6
+ movaps 64+16(%rsp),%xmm7
+ movaps 64+32(%rsp),%xmm8
+ movaps 64+48(%rsp),%xmm9
+ movaps 64+64(%rsp),%xmm10
+___
+$code.=<<___;
+ lea `64+($win64?5*16:0)`(%rsp),%rsi
+ mov 0(%rsi),%r12
+ mov 8(%rsi),%rbp
+ mov 16(%rsi),%rbx
+ lea 24(%rsi),%rsp
+.Lepilogue_avx:
+ ret
+.size sha1_block_data_order_avx,.-sha1_block_data_order_avx
+___
+}
+$code.=<<___;
+.align 64
+K_XX_XX:
+.long 0x5a827999,0x5a827999,0x5a827999,0x5a827999 # K_00_19
+.long 0x6ed9eba1,0x6ed9eba1,0x6ed9eba1,0x6ed9eba1 # K_20_39
+.long 0x8f1bbcdc,0x8f1bbcdc,0x8f1bbcdc,0x8f1bbcdc # K_40_59
+.long 0xca62c1d6,0xca62c1d6,0xca62c1d6,0xca62c1d6 # K_60_79
+.long 0x00010203,0x04050607,0x08090a0b,0x0c0d0e0f # pbswap mask
+___
+}}}
+$code.=<<___;
+.asciz "SHA1 block transform for x86_64, CRYPTOGAMS by <appro\@openssl.org>"
+.align 64
___
# EXCEPTION_DISPOSITION handler (EXCEPTION_RECORD *rec,ULONG64 frame,
@@ -272,25 +1112,75 @@ se_handler:
lea .Lprologue(%rip),%r10
cmp %r10,%rbx # context->Rip<.Lprologue
- jb .Lin_prologue
+ jb .Lcommon_seh_tail
mov 152($context),%rax # pull context->Rsp
lea .Lepilogue(%rip),%r10
cmp %r10,%rbx # context->Rip>=.Lepilogue
- jae .Lin_prologue
+ jae .Lcommon_seh_tail
mov `16*4`(%rax),%rax # pull saved stack pointer
- lea 24(%rax),%rax
+ lea 32(%rax),%rax
mov -8(%rax),%rbx
mov -16(%rax),%rbp
mov -24(%rax),%r12
+ mov -32(%rax),%r13
mov %rbx,144($context) # restore context->Rbx
mov %rbp,160($context) # restore context->Rbp
mov %r12,216($context) # restore context->R12
+ mov %r13,224($context) # restore context->R13
+
+ jmp .Lcommon_seh_tail
+.size se_handler,.-se_handler
-.Lin_prologue:
+.type ssse3_handler,\@abi-omnipotent
+.align 16
+ssse3_handler:
+ push %rsi
+ push %rdi
+ push %rbx
+ push %rbp
+ push %r12
+ push %r13
+ push %r14
+ push %r15
+ pushfq
+ sub \$64,%rsp
+
+ mov 120($context),%rax # pull context->Rax
+ mov 248($context),%rbx # pull context->Rip
+
+ mov 8($disp),%rsi # disp->ImageBase
+ mov 56($disp),%r11 # disp->HandlerData
+
+ mov 0(%r11),%r10d # HandlerData[0]
+ lea (%rsi,%r10),%r10 # prologue label
+ cmp %r10,%rbx # context->Rip<prologue label
+ jb .Lcommon_seh_tail
+
+ mov 152($context),%rax # pull context->Rsp
+
+ mov 4(%r11),%r10d # HandlerData[1]
+ lea (%rsi,%r10),%r10 # epilogue label
+ cmp %r10,%rbx # context->Rip>=epilogue label
+ jae .Lcommon_seh_tail
+
+ lea 64(%rax),%rsi
+ lea 512($context),%rdi # &context.Xmm6
+ mov \$10,%ecx
+ .long 0xa548f3fc # cld; rep movsq
+ lea `24+64+5*16`(%rax),%rax # adjust stack pointer
+
+ mov -8(%rax),%rbx
+ mov -16(%rax),%rbp
+ mov -24(%rax),%r12
+ mov %rbx,144($context) # restore context->Rbx
+ mov %rbp,160($context) # restore context->Rbp
+ mov %r12,216($context) # restore cotnext->R12
+
+.Lcommon_seh_tail:
mov 8(%rax),%rdi
mov 16(%rax),%rsi
mov %rax,152($context) # restore context->Rsp
@@ -328,19 +1218,38 @@ se_handler:
pop %rdi
pop %rsi
ret
-.size se_handler,.-se_handler
+.size ssse3_handler,.-ssse3_handler
.section .pdata
.align 4
.rva .LSEH_begin_sha1_block_data_order
.rva .LSEH_end_sha1_block_data_order
.rva .LSEH_info_sha1_block_data_order
-
+ .rva .LSEH_begin_sha1_block_data_order_ssse3
+ .rva .LSEH_end_sha1_block_data_order_ssse3
+ .rva .LSEH_info_sha1_block_data_order_ssse3
+___
+$code.=<<___ if ($avx);
+ .rva .LSEH_begin_sha1_block_data_order_avx
+ .rva .LSEH_end_sha1_block_data_order_avx
+ .rva .LSEH_info_sha1_block_data_order_avx
+___
+$code.=<<___;
.section .xdata
.align 8
.LSEH_info_sha1_block_data_order:
.byte 9,0,0,0
.rva se_handler
+.LSEH_info_sha1_block_data_order_ssse3:
+ .byte 9,0,0,0
+ .rva ssse3_handler
+ .rva .Lprologue_ssse3,.Lepilogue_ssse3 # HandlerData[]
+___
+$code.=<<___ if ($avx);
+.LSEH_info_sha1_block_data_order_avx:
+ .byte 9,0,0,0
+ .rva ssse3_handler
+ .rva .Lprologue_avx,.Lepilogue_avx # HandlerData[]
___
}
diff --git a/openssl/crypto/sha/asm/sha256-586.pl b/openssl/crypto/sha/asm/sha256-586.pl
index ecc8b69c7..928ec5312 100644
--- a/openssl/crypto/sha/asm/sha256-586.pl
+++ b/openssl/crypto/sha/asm/sha256-586.pl
@@ -14,8 +14,8 @@
# Pentium PIII P4 AMD K8 Core2
# gcc 46 36 41 27 26
# icc 57 33 38 25 23
-# x86 asm 40 30 35 20 20
-# x86_64 asm(*) - - 21 15.8 16.5
+# x86 asm 40 30 33 20 18
+# x86_64 asm(*) - - 21 16 16
#
# (*) x86_64 assembler performance is presented for reference
# purposes.
@@ -48,20 +48,19 @@ sub BODY_00_15() {
my $in_16_63=shift;
&mov ("ecx",$E);
- &add ($T,&DWP(4*(8+15+16-9),"esp")) if ($in_16_63); # T += X[-7]
- &ror ("ecx",6);
- &mov ("edi",$E);
- &ror ("edi",11);
+ &add ($T,"edi") if ($in_16_63); # T += sigma1(X[-2])
+ &ror ("ecx",25-11);
&mov ("esi",$Foff);
- &xor ("ecx","edi");
- &ror ("edi",25-11);
+ &xor ("ecx",$E);
+ &ror ("ecx",11-6);
&mov (&DWP(4*(8+15),"esp"),$T) if ($in_16_63); # save X[0]
- &xor ("ecx","edi"); # Sigma1(e)
+ &xor ("ecx",$E);
+ &ror ("ecx",6); # Sigma1(e)
&mov ("edi",$Goff);
&add ($T,"ecx"); # T += Sigma1(e)
- &mov ($Eoff,$E); # modulo-scheduled
&xor ("esi","edi");
+ &mov ($Eoff,$E); # modulo-scheduled
&mov ("ecx",$A);
&and ("esi",$E);
&mov ($E,$Doff); # e becomes d, which is e in next iteration
@@ -69,14 +68,14 @@ sub BODY_00_15() {
&mov ("edi",$A);
&add ($T,"esi"); # T += Ch(e,f,g)
- &ror ("ecx",2);
+ &ror ("ecx",22-13);
&add ($T,$Hoff); # T += h
- &ror ("edi",13);
+ &xor ("ecx",$A);
+ &ror ("ecx",13-2);
&mov ("esi",$Boff);
- &xor ("ecx","edi");
- &ror ("edi",22-13);
+ &xor ("ecx",$A);
+ &ror ("ecx",2); # Sigma0(a)
&add ($E,$T); # d += T
- &xor ("ecx","edi"); # Sigma0(a)
&mov ("edi",$Coff);
&add ($T,"ecx"); # T += Sigma0(a)
@@ -168,23 +167,22 @@ sub BODY_00_15() {
&set_label("16_63",16);
&mov ("esi",$T);
&mov ("ecx",&DWP(4*(8+15+16-14),"esp"));
- &shr ($T,3);
- &ror ("esi",7);
- &xor ($T,"esi");
&ror ("esi",18-7);
&mov ("edi","ecx");
- &xor ($T,"esi"); # T = sigma0(X[-15])
+ &xor ("esi",$T);
+ &ror ("esi",7);
+ &shr ($T,3);
- &shr ("ecx",10);
- &mov ("esi",&DWP(4*(8+15+16),"esp"));
- &ror ("edi",17);
- &xor ("ecx","edi");
&ror ("edi",19-17);
- &add ($T,"esi"); # T += X[-16]
- &xor ("edi","ecx") # sigma1(X[-2])
+ &xor ($T,"esi"); # T = sigma0(X[-15])
+ &xor ("edi","ecx");
+ &ror ("edi",17);
+ &shr ("ecx",10);
+ &add ($T,&DWP(4*(8+15+16),"esp")); # T += X[-16]
+ &xor ("edi","ecx"); # sigma1(X[-2])
- &add ($T,"edi"); # T += sigma1(X[-2])
- # &add ($T,&DWP(4*(8+15+16-9),"esp")); # T += X[-7], moved to BODY_00_15(1)
+ &add ($T,&DWP(4*(8+15+16-9),"esp")); # T += X[-7]
+ # &add ($T,"edi"); # T += sigma1(X[-2])
# &mov (&DWP(4*(8+15),"esp"),$T); # save X[0]
&BODY_00_15(1);
diff --git a/openssl/crypto/sha/asm/sha256-armv4.pl b/openssl/crypto/sha/asm/sha256-armv4.pl
index 492cb62bc..9c84e8d93 100644
--- a/openssl/crypto/sha/asm/sha256-armv4.pl
+++ b/openssl/crypto/sha/asm/sha256-armv4.pl
@@ -18,11 +18,16 @@
# Rescheduling for dual-issue pipeline resulted in 22% improvement on
# Cortex A8 core and ~20 cycles per processed byte.
+# February 2011.
+#
+# Profiler-assisted and platform-specific optimization resulted in 16%
+# improvement on Cortex A8 core and ~17 cycles per processed byte.
+
while (($output=shift) && ($output!~/^\w[\w\-]*\.\w+$/)) {}
open STDOUT,">$output";
$ctx="r0"; $t0="r0";
-$inp="r1";
+$inp="r1"; $t3="r1";
$len="r2"; $t1="r2";
$T1="r3";
$A="r4";
@@ -46,6 +51,9 @@ sub BODY_00_15 {
my ($i,$a,$b,$c,$d,$e,$f,$g,$h) = @_;
$code.=<<___ if ($i<16);
+#if __ARM_ARCH__>=7
+ ldr $T1,[$inp],#4
+#else
ldrb $T1,[$inp,#3] @ $i
ldrb $t2,[$inp,#2]
ldrb $t1,[$inp,#1]
@@ -53,16 +61,24 @@ $code.=<<___ if ($i<16);
orr $T1,$T1,$t2,lsl#8
orr $T1,$T1,$t1,lsl#16
orr $T1,$T1,$t0,lsl#24
- `"str $inp,[sp,#17*4]" if ($i==15)`
+#endif
___
$code.=<<___;
- ldr $t2,[$Ktbl],#4 @ *K256++
mov $t0,$e,ror#$Sigma1[0]
- str $T1,[sp,#`$i%16`*4]
+ ldr $t2,[$Ktbl],#4 @ *K256++
eor $t0,$t0,$e,ror#$Sigma1[1]
eor $t1,$f,$g
+#if $i>=16
+ add $T1,$T1,$t3 @ from BODY_16_xx
+#elif __ARM_ARCH__>=7 && defined(__ARMEL__)
+ rev $T1,$T1
+#endif
+#if $i==15
+ str $inp,[sp,#17*4] @ leave room for $t3
+#endif
eor $t0,$t0,$e,ror#$Sigma1[2] @ Sigma1(e)
and $t1,$t1,$e
+ str $T1,[sp,#`$i%16`*4]
add $T1,$T1,$t0
eor $t1,$t1,$g @ Ch(e,f,g)
add $T1,$T1,$h
@@ -71,6 +87,9 @@ $code.=<<___;
eor $h,$h,$a,ror#$Sigma0[1]
add $T1,$T1,$t2
eor $h,$h,$a,ror#$Sigma0[2] @ Sigma0(a)
+#if $i>=15
+ ldr $t3,[sp,#`($i+2)%16`*4] @ from BODY_16_xx
+#endif
orr $t0,$a,$b
and $t1,$a,$b
and $t0,$t0,$c
@@ -85,24 +104,26 @@ sub BODY_16_XX {
my ($i,$a,$b,$c,$d,$e,$f,$g,$h) = @_;
$code.=<<___;
- ldr $t1,[sp,#`($i+1)%16`*4] @ $i
+ @ ldr $t3,[sp,#`($i+1)%16`*4] @ $i
ldr $t2,[sp,#`($i+14)%16`*4]
+ mov $t0,$t3,ror#$sigma0[0]
ldr $T1,[sp,#`($i+0)%16`*4]
- mov $t0,$t1,ror#$sigma0[0]
- ldr $inp,[sp,#`($i+9)%16`*4]
- eor $t0,$t0,$t1,ror#$sigma0[1]
- eor $t0,$t0,$t1,lsr#$sigma0[2] @ sigma0(X[i+1])
- mov $t1,$t2,ror#$sigma1[0]
+ eor $t0,$t0,$t3,ror#$sigma0[1]
+ ldr $t1,[sp,#`($i+9)%16`*4]
+ eor $t0,$t0,$t3,lsr#$sigma0[2] @ sigma0(X[i+1])
+ mov $t3,$t2,ror#$sigma1[0]
add $T1,$T1,$t0
- eor $t1,$t1,$t2,ror#$sigma1[1]
- add $T1,$T1,$inp
- eor $t1,$t1,$t2,lsr#$sigma1[2] @ sigma1(X[i+14])
+ eor $t3,$t3,$t2,ror#$sigma1[1]
add $T1,$T1,$t1
+ eor $t3,$t3,$t2,lsr#$sigma1[2] @ sigma1(X[i+14])
+ @ add $T1,$T1,$t3
___
&BODY_00_15(@_);
}
$code=<<___;
+#include "arm_arch.h"
+
.text
.code 32
@@ -132,7 +153,7 @@ K256:
sha256_block_data_order:
sub r3,pc,#8 @ sha256_block_data_order
add $len,$inp,$len,lsl#6 @ len to point at the end of inp
- stmdb sp!,{$ctx,$inp,$len,r4-r12,lr}
+ stmdb sp!,{$ctx,$inp,$len,r4-r11,lr}
ldmia $ctx,{$A,$B,$C,$D,$E,$F,$G,$H}
sub $Ktbl,r3,#256 @ K256
sub sp,sp,#16*4 @ alloca(X[16])
@@ -171,10 +192,14 @@ $code.=<<___;
bne .Loop
add sp,sp,#`16+3`*4 @ destroy frame
- ldmia sp!,{r4-r12,lr}
+#if __ARM_ARCH__>=5
+ ldmia sp!,{r4-r11,pc}
+#else
+ ldmia sp!,{r4-r11,lr}
tst lr,#1
moveq pc,lr @ be binary compatible with V4, yet
bx lr @ interoperable with Thumb ISA:-)
+#endif
.size sha256_block_data_order,.-sha256_block_data_order
.asciz "SHA256 block transform for ARMv4, CRYPTOGAMS by <appro\@openssl.org>"
.align 2
diff --git a/openssl/crypto/sha/asm/sha512-armv4.pl b/openssl/crypto/sha/asm/sha512-armv4.pl
index 3a35861ac..7faf37b14 100644
--- a/openssl/crypto/sha/asm/sha512-armv4.pl
+++ b/openssl/crypto/sha/asm/sha512-armv4.pl
@@ -18,22 +18,33 @@
# Rescheduling for dual-issue pipeline resulted in 6% improvement on
# Cortex A8 core and ~40 cycles per processed byte.
+# February 2011.
+#
+# Profiler-assisted and platform-specific optimization resulted in 7%
+# improvement on Coxtex A8 core and ~38 cycles per byte.
+
+# March 2011.
+#
+# Add NEON implementation. On Cortex A8 it was measured to process
+# one byte in 25.5 cycles or 47% faster than integer-only code.
+
# Byte order [in]dependence. =========================================
#
-# Caller is expected to maintain specific *dword* order in h[0-7],
-# namely with most significant dword at *lower* address, which is
-# reflected in below two parameters. *Byte* order within these dwords
-# in turn is whatever *native* byte order on current platform.
-$hi=0;
-$lo=4;
+# Originally caller was expected to maintain specific *dword* order in
+# h[0-7], namely with most significant dword at *lower* address, which
+# was reflected in below two parameters as 0 and 4. Now caller is
+# expected to maintain native byte order for whole 64-bit values.
+$hi="HI";
+$lo="LO";
# ====================================================================
while (($output=shift) && ($output!~/^\w[\w\-]*\.\w+$/)) {}
open STDOUT,">$output";
-$ctx="r0";
+$ctx="r0"; # parameter block
$inp="r1";
$len="r2";
+
$Tlo="r3";
$Thi="r4";
$Alo="r5";
@@ -61,15 +72,17 @@ $Xoff=8*8;
sub BODY_00_15() {
my $magic = shift;
$code.=<<___;
- ldr $t2,[sp,#$Hoff+0] @ h.lo
- ldr $t3,[sp,#$Hoff+4] @ h.hi
@ Sigma1(x) (ROTR((x),14) ^ ROTR((x),18) ^ ROTR((x),41))
@ LO lo>>14^hi<<18 ^ lo>>18^hi<<14 ^ hi>>9^lo<<23
@ HI hi>>14^lo<<18 ^ hi>>18^lo<<14 ^ lo>>9^hi<<23
mov $t0,$Elo,lsr#14
+ str $Tlo,[sp,#$Xoff+0]
mov $t1,$Ehi,lsr#14
+ str $Thi,[sp,#$Xoff+4]
eor $t0,$t0,$Ehi,lsl#18
+ ldr $t2,[sp,#$Hoff+0] @ h.lo
eor $t1,$t1,$Elo,lsl#18
+ ldr $t3,[sp,#$Hoff+4] @ h.hi
eor $t0,$t0,$Elo,lsr#18
eor $t1,$t1,$Ehi,lsr#18
eor $t0,$t0,$Ehi,lsl#14
@@ -96,25 +109,24 @@ $code.=<<___;
and $t1,$t1,$Ehi
str $Ahi,[sp,#$Aoff+4]
eor $t0,$t0,$t2
- ldr $t2,[$Ktbl,#4] @ K[i].lo
+ ldr $t2,[$Ktbl,#$lo] @ K[i].lo
eor $t1,$t1,$t3 @ Ch(e,f,g)
- ldr $t3,[$Ktbl,#0] @ K[i].hi
+ ldr $t3,[$Ktbl,#$hi] @ K[i].hi
adds $Tlo,$Tlo,$t0
ldr $Elo,[sp,#$Doff+0] @ d.lo
adc $Thi,$Thi,$t1 @ T += Ch(e,f,g)
ldr $Ehi,[sp,#$Doff+4] @ d.hi
adds $Tlo,$Tlo,$t2
+ and $t0,$t2,#0xff
adc $Thi,$Thi,$t3 @ T += K[i]
adds $Elo,$Elo,$Tlo
+ ldr $t2,[sp,#$Boff+0] @ b.lo
adc $Ehi,$Ehi,$Thi @ d += T
-
- and $t0,$t2,#0xff
teq $t0,#$magic
- orreq $Ktbl,$Ktbl,#1
- ldr $t2,[sp,#$Boff+0] @ b.lo
ldr $t3,[sp,#$Coff+0] @ c.lo
+ orreq $Ktbl,$Ktbl,#1
@ Sigma0(x) (ROTR((x),28) ^ ROTR((x),34) ^ ROTR((x),39))
@ LO lo>>28^hi<<4 ^ hi>>2^lo<<30 ^ hi>>7^lo<<25
@ HI hi>>28^lo<<4 ^ lo>>2^hi<<30 ^ lo>>7^hi<<25
@@ -131,80 +143,100 @@ $code.=<<___;
eor $t0,$t0,$Alo,lsl#25
eor $t1,$t1,$Ahi,lsl#25 @ Sigma0(a)
adds $Tlo,$Tlo,$t0
+ and $t0,$Alo,$t2
adc $Thi,$Thi,$t1 @ T += Sigma0(a)
- and $t0,$Alo,$t2
- orr $Alo,$Alo,$t2
ldr $t1,[sp,#$Boff+4] @ b.hi
+ orr $Alo,$Alo,$t2
ldr $t2,[sp,#$Coff+4] @ c.hi
and $Alo,$Alo,$t3
- orr $Alo,$Alo,$t0 @ Maj(a,b,c).lo
and $t3,$Ahi,$t1
orr $Ahi,$Ahi,$t1
+ orr $Alo,$Alo,$t0 @ Maj(a,b,c).lo
and $Ahi,$Ahi,$t2
- orr $Ahi,$Ahi,$t3 @ Maj(a,b,c).hi
adds $Alo,$Alo,$Tlo
- adc $Ahi,$Ahi,$Thi @ h += T
-
+ orr $Ahi,$Ahi,$t3 @ Maj(a,b,c).hi
sub sp,sp,#8
+ adc $Ahi,$Ahi,$Thi @ h += T
+ tst $Ktbl,#1
add $Ktbl,$Ktbl,#8
___
}
$code=<<___;
+#include "arm_arch.h"
+#ifdef __ARMEL__
+# define LO 0
+# define HI 4
+# define WORD64(hi0,lo0,hi1,lo1) .word lo0,hi0, lo1,hi1
+#else
+# define HI 0
+# define LO 4
+# define WORD64(hi0,lo0,hi1,lo1) .word hi0,lo0, hi1,lo1
+#endif
+
.text
.code 32
.type K512,%object
.align 5
K512:
-.word 0x428a2f98,0xd728ae22, 0x71374491,0x23ef65cd
-.word 0xb5c0fbcf,0xec4d3b2f, 0xe9b5dba5,0x8189dbbc
-.word 0x3956c25b,0xf348b538, 0x59f111f1,0xb605d019
-.word 0x923f82a4,0xaf194f9b, 0xab1c5ed5,0xda6d8118
-.word 0xd807aa98,0xa3030242, 0x12835b01,0x45706fbe
-.word 0x243185be,0x4ee4b28c, 0x550c7dc3,0xd5ffb4e2
-.word 0x72be5d74,0xf27b896f, 0x80deb1fe,0x3b1696b1
-.word 0x9bdc06a7,0x25c71235, 0xc19bf174,0xcf692694
-.word 0xe49b69c1,0x9ef14ad2, 0xefbe4786,0x384f25e3
-.word 0x0fc19dc6,0x8b8cd5b5, 0x240ca1cc,0x77ac9c65
-.word 0x2de92c6f,0x592b0275, 0x4a7484aa,0x6ea6e483
-.word 0x5cb0a9dc,0xbd41fbd4, 0x76f988da,0x831153b5
-.word 0x983e5152,0xee66dfab, 0xa831c66d,0x2db43210
-.word 0xb00327c8,0x98fb213f, 0xbf597fc7,0xbeef0ee4
-.word 0xc6e00bf3,0x3da88fc2, 0xd5a79147,0x930aa725
-.word 0x06ca6351,0xe003826f, 0x14292967,0x0a0e6e70
-.word 0x27b70a85,0x46d22ffc, 0x2e1b2138,0x5c26c926
-.word 0x4d2c6dfc,0x5ac42aed, 0x53380d13,0x9d95b3df
-.word 0x650a7354,0x8baf63de, 0x766a0abb,0x3c77b2a8
-.word 0x81c2c92e,0x47edaee6, 0x92722c85,0x1482353b
-.word 0xa2bfe8a1,0x4cf10364, 0xa81a664b,0xbc423001
-.word 0xc24b8b70,0xd0f89791, 0xc76c51a3,0x0654be30
-.word 0xd192e819,0xd6ef5218, 0xd6990624,0x5565a910
-.word 0xf40e3585,0x5771202a, 0x106aa070,0x32bbd1b8
-.word 0x19a4c116,0xb8d2d0c8, 0x1e376c08,0x5141ab53
-.word 0x2748774c,0xdf8eeb99, 0x34b0bcb5,0xe19b48a8
-.word 0x391c0cb3,0xc5c95a63, 0x4ed8aa4a,0xe3418acb
-.word 0x5b9cca4f,0x7763e373, 0x682e6ff3,0xd6b2b8a3
-.word 0x748f82ee,0x5defb2fc, 0x78a5636f,0x43172f60
-.word 0x84c87814,0xa1f0ab72, 0x8cc70208,0x1a6439ec
-.word 0x90befffa,0x23631e28, 0xa4506ceb,0xde82bde9
-.word 0xbef9a3f7,0xb2c67915, 0xc67178f2,0xe372532b
-.word 0xca273ece,0xea26619c, 0xd186b8c7,0x21c0c207
-.word 0xeada7dd6,0xcde0eb1e, 0xf57d4f7f,0xee6ed178
-.word 0x06f067aa,0x72176fba, 0x0a637dc5,0xa2c898a6
-.word 0x113f9804,0xbef90dae, 0x1b710b35,0x131c471b
-.word 0x28db77f5,0x23047d84, 0x32caab7b,0x40c72493
-.word 0x3c9ebe0a,0x15c9bebc, 0x431d67c4,0x9c100d4c
-.word 0x4cc5d4be,0xcb3e42b6, 0x597f299c,0xfc657e2a
-.word 0x5fcb6fab,0x3ad6faec, 0x6c44198c,0x4a475817
+WORD64(0x428a2f98,0xd728ae22, 0x71374491,0x23ef65cd)
+WORD64(0xb5c0fbcf,0xec4d3b2f, 0xe9b5dba5,0x8189dbbc)
+WORD64(0x3956c25b,0xf348b538, 0x59f111f1,0xb605d019)
+WORD64(0x923f82a4,0xaf194f9b, 0xab1c5ed5,0xda6d8118)
+WORD64(0xd807aa98,0xa3030242, 0x12835b01,0x45706fbe)
+WORD64(0x243185be,0x4ee4b28c, 0x550c7dc3,0xd5ffb4e2)
+WORD64(0x72be5d74,0xf27b896f, 0x80deb1fe,0x3b1696b1)
+WORD64(0x9bdc06a7,0x25c71235, 0xc19bf174,0xcf692694)
+WORD64(0xe49b69c1,0x9ef14ad2, 0xefbe4786,0x384f25e3)
+WORD64(0x0fc19dc6,0x8b8cd5b5, 0x240ca1cc,0x77ac9c65)
+WORD64(0x2de92c6f,0x592b0275, 0x4a7484aa,0x6ea6e483)
+WORD64(0x5cb0a9dc,0xbd41fbd4, 0x76f988da,0x831153b5)
+WORD64(0x983e5152,0xee66dfab, 0xa831c66d,0x2db43210)
+WORD64(0xb00327c8,0x98fb213f, 0xbf597fc7,0xbeef0ee4)
+WORD64(0xc6e00bf3,0x3da88fc2, 0xd5a79147,0x930aa725)
+WORD64(0x06ca6351,0xe003826f, 0x14292967,0x0a0e6e70)
+WORD64(0x27b70a85,0x46d22ffc, 0x2e1b2138,0x5c26c926)
+WORD64(0x4d2c6dfc,0x5ac42aed, 0x53380d13,0x9d95b3df)
+WORD64(0x650a7354,0x8baf63de, 0x766a0abb,0x3c77b2a8)
+WORD64(0x81c2c92e,0x47edaee6, 0x92722c85,0x1482353b)
+WORD64(0xa2bfe8a1,0x4cf10364, 0xa81a664b,0xbc423001)
+WORD64(0xc24b8b70,0xd0f89791, 0xc76c51a3,0x0654be30)
+WORD64(0xd192e819,0xd6ef5218, 0xd6990624,0x5565a910)
+WORD64(0xf40e3585,0x5771202a, 0x106aa070,0x32bbd1b8)
+WORD64(0x19a4c116,0xb8d2d0c8, 0x1e376c08,0x5141ab53)
+WORD64(0x2748774c,0xdf8eeb99, 0x34b0bcb5,0xe19b48a8)
+WORD64(0x391c0cb3,0xc5c95a63, 0x4ed8aa4a,0xe3418acb)
+WORD64(0x5b9cca4f,0x7763e373, 0x682e6ff3,0xd6b2b8a3)
+WORD64(0x748f82ee,0x5defb2fc, 0x78a5636f,0x43172f60)
+WORD64(0x84c87814,0xa1f0ab72, 0x8cc70208,0x1a6439ec)
+WORD64(0x90befffa,0x23631e28, 0xa4506ceb,0xde82bde9)
+WORD64(0xbef9a3f7,0xb2c67915, 0xc67178f2,0xe372532b)
+WORD64(0xca273ece,0xea26619c, 0xd186b8c7,0x21c0c207)
+WORD64(0xeada7dd6,0xcde0eb1e, 0xf57d4f7f,0xee6ed178)
+WORD64(0x06f067aa,0x72176fba, 0x0a637dc5,0xa2c898a6)
+WORD64(0x113f9804,0xbef90dae, 0x1b710b35,0x131c471b)
+WORD64(0x28db77f5,0x23047d84, 0x32caab7b,0x40c72493)
+WORD64(0x3c9ebe0a,0x15c9bebc, 0x431d67c4,0x9c100d4c)
+WORD64(0x4cc5d4be,0xcb3e42b6, 0x597f299c,0xfc657e2a)
+WORD64(0x5fcb6fab,0x3ad6faec, 0x6c44198c,0x4a475817)
.size K512,.-K512
+.LOPENSSL_armcap:
+.word OPENSSL_armcap_P-sha512_block_data_order
+.skip 32-4
.global sha512_block_data_order
.type sha512_block_data_order,%function
sha512_block_data_order:
sub r3,pc,#8 @ sha512_block_data_order
add $len,$inp,$len,lsl#7 @ len to point at the end of inp
+#if __ARM_ARCH__>=7
+ ldr r12,.LOPENSSL_armcap
+ ldr r12,[r3,r12] @ OPENSSL_armcap_P
+ tst r12,#1
+ bne .LNEON
+#endif
stmdb sp!,{r4-r12,lr}
- sub $Ktbl,r3,#640 @ K512
+ sub $Ktbl,r3,#672 @ K512
sub sp,sp,#9*8
ldr $Elo,[$ctx,#$Eoff+$lo]
@@ -238,6 +270,7 @@ sha512_block_data_order:
str $Thi,[sp,#$Foff+4]
.L00_15:
+#if __ARM_ARCH__<7
ldrb $Tlo,[$inp,#7]
ldrb $t0, [$inp,#6]
ldrb $t1, [$inp,#5]
@@ -252,26 +285,30 @@ sha512_block_data_order:
orr $Thi,$Thi,$t3,lsl#8
orr $Thi,$Thi,$t0,lsl#16
orr $Thi,$Thi,$t1,lsl#24
- str $Tlo,[sp,#$Xoff+0]
- str $Thi,[sp,#$Xoff+4]
+#else
+ ldr $Tlo,[$inp,#4]
+ ldr $Thi,[$inp],#8
+#ifdef __ARMEL__
+ rev $Tlo,$Tlo
+ rev $Thi,$Thi
+#endif
+#endif
___
&BODY_00_15(0x94);
$code.=<<___;
tst $Ktbl,#1
beq .L00_15
- bic $Ktbl,$Ktbl,#1
-
-.L16_79:
ldr $t0,[sp,#`$Xoff+8*(16-1)`+0]
ldr $t1,[sp,#`$Xoff+8*(16-1)`+4]
- ldr $t2,[sp,#`$Xoff+8*(16-14)`+0]
- ldr $t3,[sp,#`$Xoff+8*(16-14)`+4]
-
+ bic $Ktbl,$Ktbl,#1
+.L16_79:
@ sigma0(x) (ROTR((x),1) ^ ROTR((x),8) ^ ((x)>>7))
@ LO lo>>1^hi<<31 ^ lo>>8^hi<<24 ^ lo>>7^hi<<25
@ HI hi>>1^lo<<31 ^ hi>>8^lo<<24 ^ hi>>7
mov $Tlo,$t0,lsr#1
+ ldr $t2,[sp,#`$Xoff+8*(16-14)`+0]
mov $Thi,$t1,lsr#1
+ ldr $t3,[sp,#`$Xoff+8*(16-14)`+4]
eor $Tlo,$Tlo,$t1,lsl#31
eor $Thi,$Thi,$t0,lsl#31
eor $Tlo,$Tlo,$t0,lsr#8
@@ -295,25 +332,24 @@ $code.=<<___;
eor $t1,$t1,$t3,lsl#3
eor $t0,$t0,$t2,lsr#6
eor $t1,$t1,$t3,lsr#6
+ ldr $t2,[sp,#`$Xoff+8*(16-9)`+0]
eor $t0,$t0,$t3,lsl#26
- ldr $t2,[sp,#`$Xoff+8*(16-9)`+0]
ldr $t3,[sp,#`$Xoff+8*(16-9)`+4]
adds $Tlo,$Tlo,$t0
+ ldr $t0,[sp,#`$Xoff+8*16`+0]
adc $Thi,$Thi,$t1
- ldr $t0,[sp,#`$Xoff+8*16`+0]
ldr $t1,[sp,#`$Xoff+8*16`+4]
adds $Tlo,$Tlo,$t2
adc $Thi,$Thi,$t3
adds $Tlo,$Tlo,$t0
adc $Thi,$Thi,$t1
- str $Tlo,[sp,#$Xoff+0]
- str $Thi,[sp,#$Xoff+4]
___
&BODY_00_15(0x17);
$code.=<<___;
- tst $Ktbl,#1
+ ldreq $t0,[sp,#`$Xoff+8*(16-1)`+0]
+ ldreq $t1,[sp,#`$Xoff+8*(16-1)`+4]
beq .L16_79
bic $Ktbl,$Ktbl,#1
@@ -324,12 +360,12 @@ $code.=<<___;
ldr $t2, [$ctx,#$Boff+$lo]
ldr $t3, [$ctx,#$Boff+$hi]
adds $t0,$Alo,$t0
- adc $t1,$Ahi,$t1
- adds $t2,$Tlo,$t2
- adc $t3,$Thi,$t3
str $t0, [$ctx,#$Aoff+$lo]
+ adc $t1,$Ahi,$t1
str $t1, [$ctx,#$Aoff+$hi]
+ adds $t2,$Tlo,$t2
str $t2, [$ctx,#$Boff+$lo]
+ adc $t3,$Thi,$t3
str $t3, [$ctx,#$Boff+$hi]
ldr $Alo,[sp,#$Coff+0]
@@ -341,12 +377,12 @@ $code.=<<___;
ldr $t2, [$ctx,#$Doff+$lo]
ldr $t3, [$ctx,#$Doff+$hi]
adds $t0,$Alo,$t0
- adc $t1,$Ahi,$t1
- adds $t2,$Tlo,$t2
- adc $t3,$Thi,$t3
str $t0, [$ctx,#$Coff+$lo]
+ adc $t1,$Ahi,$t1
str $t1, [$ctx,#$Coff+$hi]
+ adds $t2,$Tlo,$t2
str $t2, [$ctx,#$Doff+$lo]
+ adc $t3,$Thi,$t3
str $t3, [$ctx,#$Doff+$hi]
ldr $Tlo,[sp,#$Foff+0]
@@ -356,12 +392,12 @@ $code.=<<___;
ldr $t2, [$ctx,#$Foff+$lo]
ldr $t3, [$ctx,#$Foff+$hi]
adds $Elo,$Elo,$t0
- adc $Ehi,$Ehi,$t1
- adds $t2,$Tlo,$t2
- adc $t3,$Thi,$t3
str $Elo,[$ctx,#$Eoff+$lo]
+ adc $Ehi,$Ehi,$t1
str $Ehi,[$ctx,#$Eoff+$hi]
+ adds $t2,$Tlo,$t2
str $t2, [$ctx,#$Foff+$lo]
+ adc $t3,$Thi,$t3
str $t3, [$ctx,#$Foff+$hi]
ldr $Alo,[sp,#$Goff+0]
@@ -373,12 +409,12 @@ $code.=<<___;
ldr $t2, [$ctx,#$Hoff+$lo]
ldr $t3, [$ctx,#$Hoff+$hi]
adds $t0,$Alo,$t0
- adc $t1,$Ahi,$t1
- adds $t2,$Tlo,$t2
- adc $t3,$Thi,$t3
str $t0, [$ctx,#$Goff+$lo]
+ adc $t1,$Ahi,$t1
str $t1, [$ctx,#$Goff+$hi]
+ adds $t2,$Tlo,$t2
str $t2, [$ctx,#$Hoff+$lo]
+ adc $t3,$Thi,$t3
str $t3, [$ctx,#$Hoff+$hi]
add sp,sp,#640
@@ -388,13 +424,156 @@ $code.=<<___;
bne .Loop
add sp,sp,#8*9 @ destroy frame
+#if __ARM_ARCH__>=5
+ ldmia sp!,{r4-r12,pc}
+#else
ldmia sp!,{r4-r12,lr}
tst lr,#1
moveq pc,lr @ be binary compatible with V4, yet
bx lr @ interoperable with Thumb ISA:-)
-.size sha512_block_data_order,.-sha512_block_data_order
-.asciz "SHA512 block transform for ARMv4, CRYPTOGAMS by <appro\@openssl.org>"
+#endif
+___
+
+{
+my @Sigma0=(28,34,39);
+my @Sigma1=(14,18,41);
+my @sigma0=(1, 8, 7);
+my @sigma1=(19,61,6);
+
+my $Ktbl="r3";
+my $cnt="r12"; # volatile register known as ip, intra-procedure-call scratch
+
+my @X=map("d$_",(0..15));
+my @V=($A,$B,$C,$D,$E,$F,$G,$H)=map("d$_",(16..23));
+
+sub NEON_00_15() {
+my $i=shift;
+my ($a,$b,$c,$d,$e,$f,$g,$h)=@_;
+my ($t0,$t1,$t2,$T1,$K,$Ch,$Maj)=map("d$_",(24..31)); # temps
+
+$code.=<<___ if ($i<16 || $i&1);
+ vshr.u64 $t0,$e,#@Sigma1[0] @ $i
+#if $i<16
+ vld1.64 {@X[$i%16]},[$inp]! @ handles unaligned
+#endif
+ vshr.u64 $t1,$e,#@Sigma1[1]
+ vshr.u64 $t2,$e,#@Sigma1[2]
+___
+$code.=<<___;
+ vld1.64 {$K},[$Ktbl,:64]! @ K[i++]
+ vsli.64 $t0,$e,#`64-@Sigma1[0]`
+ vsli.64 $t1,$e,#`64-@Sigma1[1]`
+ vsli.64 $t2,$e,#`64-@Sigma1[2]`
+#if $i<16 && defined(__ARMEL__)
+ vrev64.8 @X[$i],@X[$i]
+#endif
+ vadd.i64 $T1,$K,$h
+ veor $Ch,$f,$g
+ veor $t0,$t1
+ vand $Ch,$e
+ veor $t0,$t2 @ Sigma1(e)
+ veor $Ch,$g @ Ch(e,f,g)
+ vadd.i64 $T1,$t0
+ vshr.u64 $t0,$a,#@Sigma0[0]
+ vadd.i64 $T1,$Ch
+ vshr.u64 $t1,$a,#@Sigma0[1]
+ vshr.u64 $t2,$a,#@Sigma0[2]
+ vsli.64 $t0,$a,#`64-@Sigma0[0]`
+ vsli.64 $t1,$a,#`64-@Sigma0[1]`
+ vsli.64 $t2,$a,#`64-@Sigma0[2]`
+ vadd.i64 $T1,@X[$i%16]
+ vorr $Maj,$a,$c
+ vand $Ch,$a,$c
+ veor $h,$t0,$t1
+ vand $Maj,$b
+ veor $h,$t2 @ Sigma0(a)
+ vorr $Maj,$Ch @ Maj(a,b,c)
+ vadd.i64 $h,$T1
+ vadd.i64 $d,$T1
+ vadd.i64 $h,$Maj
+___
+}
+
+sub NEON_16_79() {
+my $i=shift;
+
+if ($i&1) { &NEON_00_15($i,@_); return; }
+
+# 2x-vectorized, therefore runs every 2nd round
+my @X=map("q$_",(0..7)); # view @X as 128-bit vector
+my ($t0,$t1,$s0,$s1) = map("q$_",(12..15)); # temps
+my ($d0,$d1,$d2) = map("d$_",(24..26)); # temps from NEON_00_15
+my $e=@_[4]; # $e from NEON_00_15
+$i /= 2;
+$code.=<<___;
+ vshr.u64 $t0,@X[($i+7)%8],#@sigma1[0]
+ vshr.u64 $t1,@X[($i+7)%8],#@sigma1[1]
+ vshr.u64 $s1,@X[($i+7)%8],#@sigma1[2]
+ vsli.64 $t0,@X[($i+7)%8],#`64-@sigma1[0]`
+ vext.8 $s0,@X[$i%8],@X[($i+1)%8],#8 @ X[i+1]
+ vsli.64 $t1,@X[($i+7)%8],#`64-@sigma1[1]`
+ veor $s1,$t0
+ vshr.u64 $t0,$s0,#@sigma0[0]
+ veor $s1,$t1 @ sigma1(X[i+14])
+ vshr.u64 $t1,$s0,#@sigma0[1]
+ vadd.i64 @X[$i%8],$s1
+ vshr.u64 $s1,$s0,#@sigma0[2]
+ vsli.64 $t0,$s0,#`64-@sigma0[0]`
+ vsli.64 $t1,$s0,#`64-@sigma0[1]`
+ vext.8 $s0,@X[($i+4)%8],@X[($i+5)%8],#8 @ X[i+9]
+ veor $s1,$t0
+ vshr.u64 $d0,$e,#@Sigma1[0] @ from NEON_00_15
+ vadd.i64 @X[$i%8],$s0
+ vshr.u64 $d1,$e,#@Sigma1[1] @ from NEON_00_15
+ veor $s1,$t1 @ sigma0(X[i+1])
+ vshr.u64 $d2,$e,#@Sigma1[2] @ from NEON_00_15
+ vadd.i64 @X[$i%8],$s1
+___
+ &NEON_00_15(2*$i,@_);
+}
+
+$code.=<<___;
+#if __ARM_ARCH__>=7
+.fpu neon
+
+.align 4
+.LNEON:
+ dmb @ errata #451034 on early Cortex A8
+ vstmdb sp!,{d8-d15} @ ABI specification says so
+ sub $Ktbl,r3,#672 @ K512
+ vldmia $ctx,{$A-$H} @ load context
+.Loop_neon:
+___
+for($i=0;$i<16;$i++) { &NEON_00_15($i,@V); unshift(@V,pop(@V)); }
+$code.=<<___;
+ mov $cnt,#4
+.L16_79_neon:
+ subs $cnt,#1
+___
+for(;$i<32;$i++) { &NEON_16_79($i,@V); unshift(@V,pop(@V)); }
+$code.=<<___;
+ bne .L16_79_neon
+
+ vldmia $ctx,{d24-d31} @ load context to temp
+ vadd.i64 q8,q12 @ vectorized accumulate
+ vadd.i64 q9,q13
+ vadd.i64 q10,q14
+ vadd.i64 q11,q15
+ vstmia $ctx,{$A-$H} @ save context
+ teq $inp,$len
+ sub $Ktbl,#640 @ rewind K512
+ bne .Loop_neon
+
+ vldmia sp!,{d8-d15} @ epilogue
+ bx lr
+#endif
+___
+}
+$code.=<<___;
+.size sha512_block_data_order,.-sha512_block_data_order
+.asciz "SHA512 block transform for ARMv4/NEON, CRYPTOGAMS by <appro\@openssl.org>"
.align 2
+.comm OPENSSL_armcap_P,4,4
___
$code =~ s/\`([^\`]*)\`/eval $1/gem;
diff --git a/openssl/crypto/sha/asm/sha512-mips.pl b/openssl/crypto/sha/asm/sha512-mips.pl
new file mode 100644
index 000000000..ba5b25089
--- /dev/null
+++ b/openssl/crypto/sha/asm/sha512-mips.pl
@@ -0,0 +1,455 @@
+#!/usr/bin/env perl
+
+# ====================================================================
+# Written by Andy Polyakov <appro@fy.chalmers.se> for the OpenSSL
+# project. The module is, however, dual licensed under OpenSSL and
+# CRYPTOGAMS licenses depending on where you obtain it. For further
+# details see http://www.openssl.org/~appro/cryptogams/.
+# ====================================================================
+
+# SHA2 block procedures for MIPS.
+
+# October 2010.
+#
+# SHA256 performance improvement on MIPS R5000 CPU is ~27% over gcc-
+# generated code in o32 build and ~55% in n32/64 build. SHA512 [which
+# for now can only be compiled for MIPS64 ISA] improvement is modest
+# ~17%, but it comes for free, because it's same instruction sequence.
+# Improvement coefficients are for aligned input.
+
+######################################################################
+# There is a number of MIPS ABI in use, O32 and N32/64 are most
+# widely used. Then there is a new contender: NUBI. It appears that if
+# one picks the latter, it's possible to arrange code in ABI neutral
+# manner. Therefore let's stick to NUBI register layout:
+#
+($zero,$at,$t0,$t1,$t2)=map("\$$_",(0..2,24,25));
+($a0,$a1,$a2,$a3,$a4,$a5,$a6,$a7)=map("\$$_",(4..11));
+($s0,$s1,$s2,$s3,$s4,$s5,$s6,$s7,$s8,$s9,$s10,$s11)=map("\$$_",(12..23));
+($gp,$tp,$sp,$fp,$ra)=map("\$$_",(3,28..31));
+#
+# The return value is placed in $a0. Following coding rules facilitate
+# interoperability:
+#
+# - never ever touch $tp, "thread pointer", former $gp [o32 can be
+# excluded from the rule, because it's specified volatile];
+# - copy return value to $t0, former $v0 [or to $a0 if you're adapting
+# old code];
+# - on O32 populate $a4-$a7 with 'lw $aN,4*N($sp)' if necessary;
+#
+# For reference here is register layout for N32/64 MIPS ABIs:
+#
+# ($zero,$at,$v0,$v1)=map("\$$_",(0..3));
+# ($a0,$a1,$a2,$a3,$a4,$a5,$a6,$a7)=map("\$$_",(4..11));
+# ($t0,$t1,$t2,$t3,$t8,$t9)=map("\$$_",(12..15,24,25));
+# ($s0,$s1,$s2,$s3,$s4,$s5,$s6,$s7)=map("\$$_",(16..23));
+# ($gp,$sp,$fp,$ra)=map("\$$_",(28..31));
+#
+$flavour = shift; # supported flavours are o32,n32,64,nubi32,nubi64
+
+if ($flavour =~ /64|n32/i) {
+ $PTR_ADD="dadd"; # incidentally works even on n32
+ $PTR_SUB="dsub"; # incidentally works even on n32
+ $REG_S="sd";
+ $REG_L="ld";
+ $PTR_SLL="dsll"; # incidentally works even on n32
+ $SZREG=8;
+} else {
+ $PTR_ADD="add";
+ $PTR_SUB="sub";
+ $REG_S="sw";
+ $REG_L="lw";
+ $PTR_SLL="sll";
+ $SZREG=4;
+}
+$pf = ($flavour =~ /nubi/i) ? $t0 : $t2;
+#
+# <appro@openssl.org>
+#
+######################################################################
+
+$big_endian=(`echo MIPSEL | $ENV{CC} -E -P -`=~/MIPSEL/)?1:0;
+
+for (@ARGV) { $output=$_ if (/^\w[\w\-]*\.\w+$/); }
+open STDOUT,">$output";
+
+if (!defined($big_endian)) { $big_endian=(unpack('L',pack('N',1))==1); }
+
+if ($output =~ /512/) {
+ $label="512";
+ $SZ=8;
+ $LD="ld"; # load from memory
+ $ST="sd"; # store to memory
+ $SLL="dsll"; # shift left logical
+ $SRL="dsrl"; # shift right logical
+ $ADDU="daddu";
+ @Sigma0=(28,34,39);
+ @Sigma1=(14,18,41);
+ @sigma0=( 7, 1, 8); # right shift first
+ @sigma1=( 6,19,61); # right shift first
+ $lastK=0x817;
+ $rounds=80;
+} else {
+ $label="256";
+ $SZ=4;
+ $LD="lw"; # load from memory
+ $ST="sw"; # store to memory
+ $SLL="sll"; # shift left logical
+ $SRL="srl"; # shift right logical
+ $ADDU="addu";
+ @Sigma0=( 2,13,22);
+ @Sigma1=( 6,11,25);
+ @sigma0=( 3, 7,18); # right shift first
+ @sigma1=(10,17,19); # right shift first
+ $lastK=0x8f2;
+ $rounds=64;
+}
+
+$MSB = $big_endian ? 0 : ($SZ-1);
+$LSB = ($SZ-1)&~$MSB;
+
+@V=($A,$B,$C,$D,$E,$F,$G,$H)=map("\$$_",(1,2,3,7,24,25,30,31));
+@X=map("\$$_",(8..23));
+
+$ctx=$a0;
+$inp=$a1;
+$len=$a2; $Ktbl=$len;
+
+sub BODY_00_15 {
+my ($i,$a,$b,$c,$d,$e,$f,$g,$h)=@_;
+my ($T1,$tmp0,$tmp1,$tmp2)=(@X[4],@X[5],@X[6],@X[7]);
+
+$code.=<<___ if ($i<15);
+ ${LD}l @X[1],`($i+1)*$SZ+$MSB`($inp)
+ ${LD}r @X[1],`($i+1)*$SZ+$LSB`($inp)
+___
+$code.=<<___ if (!$big_endian && $i<16 && $SZ==4);
+ srl $tmp0,@X[0],24 # byte swap($i)
+ srl $tmp1,@X[0],8
+ andi $tmp2,@X[0],0xFF00
+ sll @X[0],@X[0],24
+ andi $tmp1,0xFF00
+ sll $tmp2,$tmp2,8
+ or @X[0],$tmp0
+ or $tmp1,$tmp2
+ or @X[0],$tmp1
+___
+$code.=<<___ if (!$big_endian && $i<16 && $SZ==8);
+ ori $tmp0,$zero,0xFF
+ dsll $tmp2,$tmp0,32
+ or $tmp0,$tmp2 # 0x000000FF000000FF
+ and $tmp1,@X[0],$tmp0 # byte swap($i)
+ dsrl $tmp2,@X[0],24
+ dsll $tmp1,24
+ and $tmp2,$tmp0
+ dsll $tmp0,8 # 0x0000FF000000FF00
+ or $tmp1,$tmp2
+ and $tmp2,@X[0],$tmp0
+ dsrl @X[0],8
+ dsll $tmp2,8
+ and @X[0],$tmp0
+ or $tmp1,$tmp2
+ or @X[0],$tmp1
+ dsrl $tmp1,@X[0],32
+ dsll @X[0],32
+ or @X[0],$tmp1
+___
+$code.=<<___;
+ $ADDU $T1,$X[0],$h # $i
+ $SRL $h,$e,@Sigma1[0]
+ xor $tmp2,$f,$g
+ $SLL $tmp1,$e,`$SZ*8-@Sigma1[2]`
+ and $tmp2,$e
+ $SRL $tmp0,$e,@Sigma1[1]
+ xor $h,$tmp1
+ $SLL $tmp1,$e,`$SZ*8-@Sigma1[1]`
+ xor $h,$tmp0
+ $SRL $tmp0,$e,@Sigma1[2]
+ xor $h,$tmp1
+ $SLL $tmp1,$e,`$SZ*8-@Sigma1[0]`
+ xor $h,$tmp0
+ xor $tmp2,$g # Ch(e,f,g)
+ xor $tmp0,$tmp1,$h # Sigma1(e)
+
+ $SRL $h,$a,@Sigma0[0]
+ $ADDU $T1,$tmp2
+ $LD $tmp2,`$i*$SZ`($Ktbl) # K[$i]
+ $SLL $tmp1,$a,`$SZ*8-@Sigma0[2]`
+ $ADDU $T1,$tmp0
+ $SRL $tmp0,$a,@Sigma0[1]
+ xor $h,$tmp1
+ $SLL $tmp1,$a,`$SZ*8-@Sigma0[1]`
+ xor $h,$tmp0
+ $SRL $tmp0,$a,@Sigma0[2]
+ xor $h,$tmp1
+ $SLL $tmp1,$a,`$SZ*8-@Sigma0[0]`
+ xor $h,$tmp0
+ $ST @X[0],`($i%16)*$SZ`($sp) # offload to ring buffer
+ xor $h,$tmp1 # Sigma0(a)
+
+ or $tmp0,$a,$b
+ and $tmp1,$a,$b
+ and $tmp0,$c
+ or $tmp1,$tmp0 # Maj(a,b,c)
+ $ADDU $T1,$tmp2 # +=K[$i]
+ $ADDU $h,$tmp1
+
+ $ADDU $d,$T1
+ $ADDU $h,$T1
+___
+$code.=<<___ if ($i>=13);
+ $LD @X[3],`(($i+3)%16)*$SZ`($sp) # prefetch from ring buffer
+___
+}
+
+sub BODY_16_XX {
+my $i=@_[0];
+my ($tmp0,$tmp1,$tmp2,$tmp3)=(@X[4],@X[5],@X[6],@X[7]);
+
+$code.=<<___;
+ $SRL $tmp2,@X[1],@sigma0[0] # Xupdate($i)
+ $ADDU @X[0],@X[9] # +=X[i+9]
+ $SLL $tmp1,@X[1],`$SZ*8-@sigma0[2]`
+ $SRL $tmp0,@X[1],@sigma0[1]
+ xor $tmp2,$tmp1
+ $SLL $tmp1,`@sigma0[2]-@sigma0[1]`
+ xor $tmp2,$tmp0
+ $SRL $tmp0,@X[1],@sigma0[2]
+ xor $tmp2,$tmp1
+
+ $SRL $tmp3,@X[14],@sigma1[0]
+ xor $tmp2,$tmp0 # sigma0(X[i+1])
+ $SLL $tmp1,@X[14],`$SZ*8-@sigma1[2]`
+ $ADDU @X[0],$tmp2
+ $SRL $tmp0,@X[14],@sigma1[1]
+ xor $tmp3,$tmp1
+ $SLL $tmp1,`@sigma1[2]-@sigma1[1]`
+ xor $tmp3,$tmp0
+ $SRL $tmp0,@X[14],@sigma1[2]
+ xor $tmp3,$tmp1
+
+ xor $tmp3,$tmp0 # sigma1(X[i+14])
+ $ADDU @X[0],$tmp3
+___
+ &BODY_00_15(@_);
+}
+
+$FRAMESIZE=16*$SZ+16*$SZREG;
+$SAVED_REGS_MASK = ($flavour =~ /nubi/i) ? 0xc0fff008 : 0xc0ff0000;
+
+$code.=<<___;
+#ifdef OPENSSL_FIPSCANISTER
+# include <openssl/fipssyms.h>
+#endif
+
+.text
+.set noat
+#if !defined(__vxworks) || defined(__pic__)
+.option pic2
+#endif
+
+.align 5
+.globl sha${label}_block_data_order
+.ent sha${label}_block_data_order
+sha${label}_block_data_order:
+ .frame $sp,$FRAMESIZE,$ra
+ .mask $SAVED_REGS_MASK,-$SZREG
+ .set noreorder
+___
+$code.=<<___ if ($flavour =~ /o32/i); # o32 PIC-ification
+ .cpload $pf
+___
+$code.=<<___;
+ $PTR_SUB $sp,$FRAMESIZE
+ $REG_S $ra,$FRAMESIZE-1*$SZREG($sp)
+ $REG_S $fp,$FRAMESIZE-2*$SZREG($sp)
+ $REG_S $s11,$FRAMESIZE-3*$SZREG($sp)
+ $REG_S $s10,$FRAMESIZE-4*$SZREG($sp)
+ $REG_S $s9,$FRAMESIZE-5*$SZREG($sp)
+ $REG_S $s8,$FRAMESIZE-6*$SZREG($sp)
+ $REG_S $s7,$FRAMESIZE-7*$SZREG($sp)
+ $REG_S $s6,$FRAMESIZE-8*$SZREG($sp)
+ $REG_S $s5,$FRAMESIZE-9*$SZREG($sp)
+ $REG_S $s4,$FRAMESIZE-10*$SZREG($sp)
+___
+$code.=<<___ if ($flavour =~ /nubi/i); # optimize non-nubi prologue
+ $REG_S $s3,$FRAMESIZE-11*$SZREG($sp)
+ $REG_S $s2,$FRAMESIZE-12*$SZREG($sp)
+ $REG_S $s1,$FRAMESIZE-13*$SZREG($sp)
+ $REG_S $s0,$FRAMESIZE-14*$SZREG($sp)
+ $REG_S $gp,$FRAMESIZE-15*$SZREG($sp)
+___
+$code.=<<___;
+ $PTR_SLL @X[15],$len,`log(16*$SZ)/log(2)`
+___
+$code.=<<___ if ($flavour !~ /o32/i); # non-o32 PIC-ification
+ .cplocal $Ktbl
+ .cpsetup $pf,$zero,sha${label}_block_data_order
+___
+$code.=<<___;
+ .set reorder
+ la $Ktbl,K${label} # PIC-ified 'load address'
+
+ $LD $A,0*$SZ($ctx) # load context
+ $LD $B,1*$SZ($ctx)
+ $LD $C,2*$SZ($ctx)
+ $LD $D,3*$SZ($ctx)
+ $LD $E,4*$SZ($ctx)
+ $LD $F,5*$SZ($ctx)
+ $LD $G,6*$SZ($ctx)
+ $LD $H,7*$SZ($ctx)
+
+ $PTR_ADD @X[15],$inp # pointer to the end of input
+ $REG_S @X[15],16*$SZ($sp)
+ b .Loop
+
+.align 5
+.Loop:
+ ${LD}l @X[0],$MSB($inp)
+ ${LD}r @X[0],$LSB($inp)
+___
+for ($i=0;$i<16;$i++)
+{ &BODY_00_15($i,@V); unshift(@V,pop(@V)); push(@X,shift(@X)); }
+$code.=<<___;
+ b .L16_xx
+.align 4
+.L16_xx:
+___
+for (;$i<32;$i++)
+{ &BODY_16_XX($i,@V); unshift(@V,pop(@V)); push(@X,shift(@X)); }
+$code.=<<___;
+ and @X[6],0xfff
+ li @X[7],$lastK
+ .set noreorder
+ bne @X[6],@X[7],.L16_xx
+ $PTR_ADD $Ktbl,16*$SZ # Ktbl+=16
+
+ $REG_L @X[15],16*$SZ($sp) # restore pointer to the end of input
+ $LD @X[0],0*$SZ($ctx)
+ $LD @X[1],1*$SZ($ctx)
+ $LD @X[2],2*$SZ($ctx)
+ $PTR_ADD $inp,16*$SZ
+ $LD @X[3],3*$SZ($ctx)
+ $ADDU $A,@X[0]
+ $LD @X[4],4*$SZ($ctx)
+ $ADDU $B,@X[1]
+ $LD @X[5],5*$SZ($ctx)
+ $ADDU $C,@X[2]
+ $LD @X[6],6*$SZ($ctx)
+ $ADDU $D,@X[3]
+ $LD @X[7],7*$SZ($ctx)
+ $ADDU $E,@X[4]
+ $ST $A,0*$SZ($ctx)
+ $ADDU $F,@X[5]
+ $ST $B,1*$SZ($ctx)
+ $ADDU $G,@X[6]
+ $ST $C,2*$SZ($ctx)
+ $ADDU $H,@X[7]
+ $ST $D,3*$SZ($ctx)
+ $ST $E,4*$SZ($ctx)
+ $ST $F,5*$SZ($ctx)
+ $ST $G,6*$SZ($ctx)
+ $ST $H,7*$SZ($ctx)
+
+ bnel $inp,@X[15],.Loop
+ $PTR_SUB $Ktbl,`($rounds-16)*$SZ` # rewind $Ktbl
+
+ $REG_L $ra,$FRAMESIZE-1*$SZREG($sp)
+ $REG_L $fp,$FRAMESIZE-2*$SZREG($sp)
+ $REG_L $s11,$FRAMESIZE-3*$SZREG($sp)
+ $REG_L $s10,$FRAMESIZE-4*$SZREG($sp)
+ $REG_L $s9,$FRAMESIZE-5*$SZREG($sp)
+ $REG_L $s8,$FRAMESIZE-6*$SZREG($sp)
+ $REG_L $s7,$FRAMESIZE-7*$SZREG($sp)
+ $REG_L $s6,$FRAMESIZE-8*$SZREG($sp)
+ $REG_L $s5,$FRAMESIZE-9*$SZREG($sp)
+ $REG_L $s4,$FRAMESIZE-10*$SZREG($sp)
+___
+$code.=<<___ if ($flavour =~ /nubi/i);
+ $REG_L $s3,$FRAMESIZE-11*$SZREG($sp)
+ $REG_L $s2,$FRAMESIZE-12*$SZREG($sp)
+ $REG_L $s1,$FRAMESIZE-13*$SZREG($sp)
+ $REG_L $s0,$FRAMESIZE-14*$SZREG($sp)
+ $REG_L $gp,$FRAMESIZE-15*$SZREG($sp)
+___
+$code.=<<___;
+ jr $ra
+ $PTR_ADD $sp,$FRAMESIZE
+.end sha${label}_block_data_order
+
+.rdata
+.align 5
+K${label}:
+___
+if ($SZ==4) {
+$code.=<<___;
+ .word 0x428a2f98, 0x71374491, 0xb5c0fbcf, 0xe9b5dba5
+ .word 0x3956c25b, 0x59f111f1, 0x923f82a4, 0xab1c5ed5
+ .word 0xd807aa98, 0x12835b01, 0x243185be, 0x550c7dc3
+ .word 0x72be5d74, 0x80deb1fe, 0x9bdc06a7, 0xc19bf174
+ .word 0xe49b69c1, 0xefbe4786, 0x0fc19dc6, 0x240ca1cc
+ .word 0x2de92c6f, 0x4a7484aa, 0x5cb0a9dc, 0x76f988da
+ .word 0x983e5152, 0xa831c66d, 0xb00327c8, 0xbf597fc7
+ .word 0xc6e00bf3, 0xd5a79147, 0x06ca6351, 0x14292967
+ .word 0x27b70a85, 0x2e1b2138, 0x4d2c6dfc, 0x53380d13
+ .word 0x650a7354, 0x766a0abb, 0x81c2c92e, 0x92722c85
+ .word 0xa2bfe8a1, 0xa81a664b, 0xc24b8b70, 0xc76c51a3
+ .word 0xd192e819, 0xd6990624, 0xf40e3585, 0x106aa070
+ .word 0x19a4c116, 0x1e376c08, 0x2748774c, 0x34b0bcb5
+ .word 0x391c0cb3, 0x4ed8aa4a, 0x5b9cca4f, 0x682e6ff3
+ .word 0x748f82ee, 0x78a5636f, 0x84c87814, 0x8cc70208
+ .word 0x90befffa, 0xa4506ceb, 0xbef9a3f7, 0xc67178f2
+___
+} else {
+$code.=<<___;
+ .dword 0x428a2f98d728ae22, 0x7137449123ef65cd
+ .dword 0xb5c0fbcfec4d3b2f, 0xe9b5dba58189dbbc
+ .dword 0x3956c25bf348b538, 0x59f111f1b605d019
+ .dword 0x923f82a4af194f9b, 0xab1c5ed5da6d8118
+ .dword 0xd807aa98a3030242, 0x12835b0145706fbe
+ .dword 0x243185be4ee4b28c, 0x550c7dc3d5ffb4e2
+ .dword 0x72be5d74f27b896f, 0x80deb1fe3b1696b1
+ .dword 0x9bdc06a725c71235, 0xc19bf174cf692694
+ .dword 0xe49b69c19ef14ad2, 0xefbe4786384f25e3
+ .dword 0x0fc19dc68b8cd5b5, 0x240ca1cc77ac9c65
+ .dword 0x2de92c6f592b0275, 0x4a7484aa6ea6e483
+ .dword 0x5cb0a9dcbd41fbd4, 0x76f988da831153b5
+ .dword 0x983e5152ee66dfab, 0xa831c66d2db43210
+ .dword 0xb00327c898fb213f, 0xbf597fc7beef0ee4
+ .dword 0xc6e00bf33da88fc2, 0xd5a79147930aa725
+ .dword 0x06ca6351e003826f, 0x142929670a0e6e70
+ .dword 0x27b70a8546d22ffc, 0x2e1b21385c26c926
+ .dword 0x4d2c6dfc5ac42aed, 0x53380d139d95b3df
+ .dword 0x650a73548baf63de, 0x766a0abb3c77b2a8
+ .dword 0x81c2c92e47edaee6, 0x92722c851482353b
+ .dword 0xa2bfe8a14cf10364, 0xa81a664bbc423001
+ .dword 0xc24b8b70d0f89791, 0xc76c51a30654be30
+ .dword 0xd192e819d6ef5218, 0xd69906245565a910
+ .dword 0xf40e35855771202a, 0x106aa07032bbd1b8
+ .dword 0x19a4c116b8d2d0c8, 0x1e376c085141ab53
+ .dword 0x2748774cdf8eeb99, 0x34b0bcb5e19b48a8
+ .dword 0x391c0cb3c5c95a63, 0x4ed8aa4ae3418acb
+ .dword 0x5b9cca4f7763e373, 0x682e6ff3d6b2b8a3
+ .dword 0x748f82ee5defb2fc, 0x78a5636f43172f60
+ .dword 0x84c87814a1f0ab72, 0x8cc702081a6439ec
+ .dword 0x90befffa23631e28, 0xa4506cebde82bde9
+ .dword 0xbef9a3f7b2c67915, 0xc67178f2e372532b
+ .dword 0xca273eceea26619c, 0xd186b8c721c0c207
+ .dword 0xeada7dd6cde0eb1e, 0xf57d4f7fee6ed178
+ .dword 0x06f067aa72176fba, 0x0a637dc5a2c898a6
+ .dword 0x113f9804bef90dae, 0x1b710b35131c471b
+ .dword 0x28db77f523047d84, 0x32caab7b40c72493
+ .dword 0x3c9ebe0a15c9bebc, 0x431d67c49c100d4c
+ .dword 0x4cc5d4becb3e42b6, 0x597f299cfc657e2a
+ .dword 0x5fcb6fab3ad6faec, 0x6c44198c4a475817
+___
+}
+$code.=<<___;
+.asciiz "SHA${label} for MIPS, CRYPTOGAMS by <appro\@openssl.org>"
+.align 5
+
+___
+
+$code =~ s/\`([^\`]*)\`/eval $1/gem;
+print $code;
+close STDOUT;
diff --git a/openssl/crypto/sha/asm/sha512-parisc.pl b/openssl/crypto/sha/asm/sha512-parisc.pl
new file mode 100644
index 000000000..e24ee58ae
--- /dev/null
+++ b/openssl/crypto/sha/asm/sha512-parisc.pl
@@ -0,0 +1,791 @@
+#!/usr/bin/env perl
+
+# ====================================================================
+# Written by Andy Polyakov <appro@fy.chalmers.se> for the OpenSSL
+# project. The module is, however, dual licensed under OpenSSL and
+# CRYPTOGAMS licenses depending on where you obtain it. For further
+# details see http://www.openssl.org/~appro/cryptogams/.
+# ====================================================================
+
+# SHA256/512 block procedure for PA-RISC.
+
+# June 2009.
+#
+# SHA256 performance is >75% better than gcc 3.2 generated code on
+# PA-7100LC. Compared to code generated by vendor compiler this
+# implementation is almost 70% faster in 64-bit build, but delivers
+# virtually same performance in 32-bit build on PA-8600.
+#
+# SHA512 performance is >2.9x better than gcc 3.2 generated code on
+# PA-7100LC, PA-RISC 1.1 processor. Then implementation detects if the
+# code is executed on PA-RISC 2.0 processor and switches to 64-bit
+# code path delivering adequate peformance even in "blended" 32-bit
+# build. Though 64-bit code is not any faster than code generated by
+# vendor compiler on PA-8600...
+#
+# Special thanks to polarhome.com for providing HP-UX account.
+
+$flavour = shift;
+$output = shift;
+open STDOUT,">$output";
+
+if ($flavour =~ /64/) {
+ $LEVEL ="2.0W";
+ $SIZE_T =8;
+ $FRAME_MARKER =80;
+ $SAVED_RP =16;
+ $PUSH ="std";
+ $PUSHMA ="std,ma";
+ $POP ="ldd";
+ $POPMB ="ldd,mb";
+} else {
+ $LEVEL ="1.0";
+ $SIZE_T =4;
+ $FRAME_MARKER =48;
+ $SAVED_RP =20;
+ $PUSH ="stw";
+ $PUSHMA ="stwm";
+ $POP ="ldw";
+ $POPMB ="ldwm";
+}
+
+if ($output =~ /512/) {
+ $func="sha512_block_data_order";
+ $SZ=8;
+ @Sigma0=(28,34,39);
+ @Sigma1=(14,18,41);
+ @sigma0=(1, 8, 7);
+ @sigma1=(19,61, 6);
+ $rounds=80;
+ $LAST10BITS=0x017;
+ $LD="ldd";
+ $LDM="ldd,ma";
+ $ST="std";
+} else {
+ $func="sha256_block_data_order";
+ $SZ=4;
+ @Sigma0=( 2,13,22);
+ @Sigma1=( 6,11,25);
+ @sigma0=( 7,18, 3);
+ @sigma1=(17,19,10);
+ $rounds=64;
+ $LAST10BITS=0x0f2;
+ $LD="ldw";
+ $LDM="ldwm";
+ $ST="stw";
+}
+
+$FRAME=16*$SIZE_T+$FRAME_MARKER;# 16 saved regs + frame marker
+ # [+ argument transfer]
+$XOFF=16*$SZ+32; # local variables
+$FRAME+=$XOFF;
+$XOFF+=$FRAME_MARKER; # distance between %sp and local variables
+
+$ctx="%r26"; # zapped by $a0
+$inp="%r25"; # zapped by $a1
+$num="%r24"; # zapped by $t0
+
+$a0 ="%r26";
+$a1 ="%r25";
+$t0 ="%r24";
+$t1 ="%r29";
+$Tbl="%r31";
+
+@V=($A,$B,$C,$D,$E,$F,$G,$H)=("%r17","%r18","%r19","%r20","%r21","%r22","%r23","%r28");
+
+@X=("%r1", "%r2", "%r3", "%r4", "%r5", "%r6", "%r7", "%r8",
+ "%r9", "%r10","%r11","%r12","%r13","%r14","%r15","%r16",$inp);
+
+sub ROUND_00_15 {
+my ($i,$a,$b,$c,$d,$e,$f,$g,$h)=@_;
+$code.=<<___;
+ _ror $e,$Sigma1[0],$a0
+ and $f,$e,$t0
+ _ror $e,$Sigma1[1],$a1
+ addl $t1,$h,$h
+ andcm $g,$e,$t1
+ xor $a1,$a0,$a0
+ _ror $a1,`$Sigma1[2]-$Sigma1[1]`,$a1
+ or $t0,$t1,$t1 ; Ch(e,f,g)
+ addl @X[$i%16],$h,$h
+ xor $a0,$a1,$a1 ; Sigma1(e)
+ addl $t1,$h,$h
+ _ror $a,$Sigma0[0],$a0
+ addl $a1,$h,$h
+
+ _ror $a,$Sigma0[1],$a1
+ and $a,$b,$t0
+ and $a,$c,$t1
+ xor $a1,$a0,$a0
+ _ror $a1,`$Sigma0[2]-$Sigma0[1]`,$a1
+ xor $t1,$t0,$t0
+ and $b,$c,$t1
+ xor $a0,$a1,$a1 ; Sigma0(a)
+ addl $h,$d,$d
+ xor $t1,$t0,$t0 ; Maj(a,b,c)
+ `"$LDM $SZ($Tbl),$t1" if ($i<15)`
+ addl $a1,$h,$h
+ addl $t0,$h,$h
+
+___
+}
+
+sub ROUND_16_xx {
+my ($i,$a,$b,$c,$d,$e,$f,$g,$h)=@_;
+$i-=16;
+$code.=<<___;
+ _ror @X[($i+1)%16],$sigma0[0],$a0
+ _ror @X[($i+1)%16],$sigma0[1],$a1
+ addl @X[($i+9)%16],@X[$i],@X[$i]
+ _ror @X[($i+14)%16],$sigma1[0],$t0
+ _ror @X[($i+14)%16],$sigma1[1],$t1
+ xor $a1,$a0,$a0
+ _shr @X[($i+1)%16],$sigma0[2],$a1
+ xor $t1,$t0,$t0
+ _shr @X[($i+14)%16],$sigma1[2],$t1
+ xor $a1,$a0,$a0 ; sigma0(X[(i+1)&0x0f])
+ xor $t1,$t0,$t0 ; sigma1(X[(i+14)&0x0f])
+ $LDM $SZ($Tbl),$t1
+ addl $a0,@X[$i],@X[$i]
+ addl $t0,@X[$i],@X[$i]
+___
+$code.=<<___ if ($i==15);
+ extru $t1,31,10,$a1
+ comiclr,<> $LAST10BITS,$a1,%r0
+ ldo 1($Tbl),$Tbl ; signal end of $Tbl
+___
+&ROUND_00_15($i+16,$a,$b,$c,$d,$e,$f,$g,$h);
+}
+
+$code=<<___;
+ .LEVEL $LEVEL
+ .SPACE \$TEXT\$
+ .SUBSPA \$CODE\$,QUAD=0,ALIGN=8,ACCESS=0x2C,CODE_ONLY
+
+ .ALIGN 64
+L\$table
+___
+$code.=<<___ if ($SZ==8);
+ .WORD 0x428a2f98,0xd728ae22,0x71374491,0x23ef65cd
+ .WORD 0xb5c0fbcf,0xec4d3b2f,0xe9b5dba5,0x8189dbbc
+ .WORD 0x3956c25b,0xf348b538,0x59f111f1,0xb605d019
+ .WORD 0x923f82a4,0xaf194f9b,0xab1c5ed5,0xda6d8118
+ .WORD 0xd807aa98,0xa3030242,0x12835b01,0x45706fbe
+ .WORD 0x243185be,0x4ee4b28c,0x550c7dc3,0xd5ffb4e2
+ .WORD 0x72be5d74,0xf27b896f,0x80deb1fe,0x3b1696b1
+ .WORD 0x9bdc06a7,0x25c71235,0xc19bf174,0xcf692694
+ .WORD 0xe49b69c1,0x9ef14ad2,0xefbe4786,0x384f25e3
+ .WORD 0x0fc19dc6,0x8b8cd5b5,0x240ca1cc,0x77ac9c65
+ .WORD 0x2de92c6f,0x592b0275,0x4a7484aa,0x6ea6e483
+ .WORD 0x5cb0a9dc,0xbd41fbd4,0x76f988da,0x831153b5
+ .WORD 0x983e5152,0xee66dfab,0xa831c66d,0x2db43210
+ .WORD 0xb00327c8,0x98fb213f,0xbf597fc7,0xbeef0ee4
+ .WORD 0xc6e00bf3,0x3da88fc2,0xd5a79147,0x930aa725
+ .WORD 0x06ca6351,0xe003826f,0x14292967,0x0a0e6e70
+ .WORD 0x27b70a85,0x46d22ffc,0x2e1b2138,0x5c26c926
+ .WORD 0x4d2c6dfc,0x5ac42aed,0x53380d13,0x9d95b3df
+ .WORD 0x650a7354,0x8baf63de,0x766a0abb,0x3c77b2a8
+ .WORD 0x81c2c92e,0x47edaee6,0x92722c85,0x1482353b
+ .WORD 0xa2bfe8a1,0x4cf10364,0xa81a664b,0xbc423001
+ .WORD 0xc24b8b70,0xd0f89791,0xc76c51a3,0x0654be30
+ .WORD 0xd192e819,0xd6ef5218,0xd6990624,0x5565a910
+ .WORD 0xf40e3585,0x5771202a,0x106aa070,0x32bbd1b8
+ .WORD 0x19a4c116,0xb8d2d0c8,0x1e376c08,0x5141ab53
+ .WORD 0x2748774c,0xdf8eeb99,0x34b0bcb5,0xe19b48a8
+ .WORD 0x391c0cb3,0xc5c95a63,0x4ed8aa4a,0xe3418acb
+ .WORD 0x5b9cca4f,0x7763e373,0x682e6ff3,0xd6b2b8a3
+ .WORD 0x748f82ee,0x5defb2fc,0x78a5636f,0x43172f60
+ .WORD 0x84c87814,0xa1f0ab72,0x8cc70208,0x1a6439ec
+ .WORD 0x90befffa,0x23631e28,0xa4506ceb,0xde82bde9
+ .WORD 0xbef9a3f7,0xb2c67915,0xc67178f2,0xe372532b
+ .WORD 0xca273ece,0xea26619c,0xd186b8c7,0x21c0c207
+ .WORD 0xeada7dd6,0xcde0eb1e,0xf57d4f7f,0xee6ed178
+ .WORD 0x06f067aa,0x72176fba,0x0a637dc5,0xa2c898a6
+ .WORD 0x113f9804,0xbef90dae,0x1b710b35,0x131c471b
+ .WORD 0x28db77f5,0x23047d84,0x32caab7b,0x40c72493
+ .WORD 0x3c9ebe0a,0x15c9bebc,0x431d67c4,0x9c100d4c
+ .WORD 0x4cc5d4be,0xcb3e42b6,0x597f299c,0xfc657e2a
+ .WORD 0x5fcb6fab,0x3ad6faec,0x6c44198c,0x4a475817
+___
+$code.=<<___ if ($SZ==4);
+ .WORD 0x428a2f98,0x71374491,0xb5c0fbcf,0xe9b5dba5
+ .WORD 0x3956c25b,0x59f111f1,0x923f82a4,0xab1c5ed5
+ .WORD 0xd807aa98,0x12835b01,0x243185be,0x550c7dc3
+ .WORD 0x72be5d74,0x80deb1fe,0x9bdc06a7,0xc19bf174
+ .WORD 0xe49b69c1,0xefbe4786,0x0fc19dc6,0x240ca1cc
+ .WORD 0x2de92c6f,0x4a7484aa,0x5cb0a9dc,0x76f988da
+ .WORD 0x983e5152,0xa831c66d,0xb00327c8,0xbf597fc7
+ .WORD 0xc6e00bf3,0xd5a79147,0x06ca6351,0x14292967
+ .WORD 0x27b70a85,0x2e1b2138,0x4d2c6dfc,0x53380d13
+ .WORD 0x650a7354,0x766a0abb,0x81c2c92e,0x92722c85
+ .WORD 0xa2bfe8a1,0xa81a664b,0xc24b8b70,0xc76c51a3
+ .WORD 0xd192e819,0xd6990624,0xf40e3585,0x106aa070
+ .WORD 0x19a4c116,0x1e376c08,0x2748774c,0x34b0bcb5
+ .WORD 0x391c0cb3,0x4ed8aa4a,0x5b9cca4f,0x682e6ff3
+ .WORD 0x748f82ee,0x78a5636f,0x84c87814,0x8cc70208
+ .WORD 0x90befffa,0xa4506ceb,0xbef9a3f7,0xc67178f2
+___
+$code.=<<___;
+
+ .EXPORT $func,ENTRY,ARGW0=GR,ARGW1=GR,ARGW2=GR
+ .ALIGN 64
+$func
+ .PROC
+ .CALLINFO FRAME=`$FRAME-16*$SIZE_T`,NO_CALLS,SAVE_RP,ENTRY_GR=18
+ .ENTRY
+ $PUSH %r2,-$SAVED_RP(%sp) ; standard prologue
+ $PUSHMA %r3,$FRAME(%sp)
+ $PUSH %r4,`-$FRAME+1*$SIZE_T`(%sp)
+ $PUSH %r5,`-$FRAME+2*$SIZE_T`(%sp)
+ $PUSH %r6,`-$FRAME+3*$SIZE_T`(%sp)
+ $PUSH %r7,`-$FRAME+4*$SIZE_T`(%sp)
+ $PUSH %r8,`-$FRAME+5*$SIZE_T`(%sp)
+ $PUSH %r9,`-$FRAME+6*$SIZE_T`(%sp)
+ $PUSH %r10,`-$FRAME+7*$SIZE_T`(%sp)
+ $PUSH %r11,`-$FRAME+8*$SIZE_T`(%sp)
+ $PUSH %r12,`-$FRAME+9*$SIZE_T`(%sp)
+ $PUSH %r13,`-$FRAME+10*$SIZE_T`(%sp)
+ $PUSH %r14,`-$FRAME+11*$SIZE_T`(%sp)
+ $PUSH %r15,`-$FRAME+12*$SIZE_T`(%sp)
+ $PUSH %r16,`-$FRAME+13*$SIZE_T`(%sp)
+ $PUSH %r17,`-$FRAME+14*$SIZE_T`(%sp)
+ $PUSH %r18,`-$FRAME+15*$SIZE_T`(%sp)
+
+ _shl $num,`log(16*$SZ)/log(2)`,$num
+ addl $inp,$num,$num ; $num to point at the end of $inp
+
+ $PUSH $num,`-$FRAME_MARKER-4*$SIZE_T`(%sp) ; save arguments
+ $PUSH $inp,`-$FRAME_MARKER-3*$SIZE_T`(%sp)
+ $PUSH $ctx,`-$FRAME_MARKER-2*$SIZE_T`(%sp)
+
+ blr %r0,$Tbl
+ ldi 3,$t1
+L\$pic
+ andcm $Tbl,$t1,$Tbl ; wipe privilege level
+ ldo L\$table-L\$pic($Tbl),$Tbl
+___
+$code.=<<___ if ($SZ==8 && $SIZE_T==4);
+ ldi 31,$t1
+ mtctl $t1,%cr11
+ extrd,u,*= $t1,%sar,1,$t1 ; executes on PA-RISC 1.0
+ b L\$parisc1
+ nop
+___
+$code.=<<___;
+ $LD `0*$SZ`($ctx),$A ; load context
+ $LD `1*$SZ`($ctx),$B
+ $LD `2*$SZ`($ctx),$C
+ $LD `3*$SZ`($ctx),$D
+ $LD `4*$SZ`($ctx),$E
+ $LD `5*$SZ`($ctx),$F
+ $LD `6*$SZ`($ctx),$G
+ $LD `7*$SZ`($ctx),$H
+
+ extru $inp,31,`log($SZ)/log(2)`,$t0
+ sh3addl $t0,%r0,$t0
+ subi `8*$SZ`,$t0,$t0
+ mtctl $t0,%cr11 ; load %sar with align factor
+
+L\$oop
+ ldi `$SZ-1`,$t0
+ $LDM $SZ($Tbl),$t1
+ andcm $inp,$t0,$t0 ; align $inp
+___
+ for ($i=0;$i<15;$i++) { # load input block
+ $code.="\t$LD `$SZ*$i`($t0),@X[$i]\n"; }
+$code.=<<___;
+ cmpb,*= $inp,$t0,L\$aligned
+ $LD `$SZ*15`($t0),@X[15]
+ $LD `$SZ*16`($t0),@X[16]
+___
+ for ($i=0;$i<16;$i++) { # align data
+ $code.="\t_align @X[$i],@X[$i+1],@X[$i]\n"; }
+$code.=<<___;
+L\$aligned
+ nop ; otherwise /usr/ccs/bin/as is confused by below .WORD
+___
+
+for($i=0;$i<16;$i++) { &ROUND_00_15($i,@V); unshift(@V,pop(@V)); }
+$code.=<<___;
+L\$rounds
+ nop ; otherwise /usr/ccs/bin/as is confused by below .WORD
+___
+for(;$i<32;$i++) { &ROUND_16_xx($i,@V); unshift(@V,pop(@V)); }
+$code.=<<___;
+ bb,>= $Tbl,31,L\$rounds ; end of $Tbl signalled?
+ nop
+
+ $POP `-$FRAME_MARKER-2*$SIZE_T`(%sp),$ctx ; restore arguments
+ $POP `-$FRAME_MARKER-3*$SIZE_T`(%sp),$inp
+ $POP `-$FRAME_MARKER-4*$SIZE_T`(%sp),$num
+ ldo `-$rounds*$SZ-1`($Tbl),$Tbl ; rewind $Tbl
+
+ $LD `0*$SZ`($ctx),@X[0] ; load context
+ $LD `1*$SZ`($ctx),@X[1]
+ $LD `2*$SZ`($ctx),@X[2]
+ $LD `3*$SZ`($ctx),@X[3]
+ $LD `4*$SZ`($ctx),@X[4]
+ $LD `5*$SZ`($ctx),@X[5]
+ addl @X[0],$A,$A
+ $LD `6*$SZ`($ctx),@X[6]
+ addl @X[1],$B,$B
+ $LD `7*$SZ`($ctx),@X[7]
+ ldo `16*$SZ`($inp),$inp ; advance $inp
+
+ $ST $A,`0*$SZ`($ctx) ; save context
+ addl @X[2],$C,$C
+ $ST $B,`1*$SZ`($ctx)
+ addl @X[3],$D,$D
+ $ST $C,`2*$SZ`($ctx)
+ addl @X[4],$E,$E
+ $ST $D,`3*$SZ`($ctx)
+ addl @X[5],$F,$F
+ $ST $E,`4*$SZ`($ctx)
+ addl @X[6],$G,$G
+ $ST $F,`5*$SZ`($ctx)
+ addl @X[7],$H,$H
+ $ST $G,`6*$SZ`($ctx)
+ $ST $H,`7*$SZ`($ctx)
+
+ cmpb,*<>,n $inp,$num,L\$oop
+ $PUSH $inp,`-$FRAME_MARKER-3*$SIZE_T`(%sp) ; save $inp
+___
+if ($SZ==8 && $SIZE_T==4) # SHA512 for 32-bit PA-RISC 1.0
+{{
+$code.=<<___;
+ b L\$done
+ nop
+
+ .ALIGN 64
+L\$parisc1
+___
+
+@V=( $Ahi, $Alo, $Bhi, $Blo, $Chi, $Clo, $Dhi, $Dlo,
+ $Ehi, $Elo, $Fhi, $Flo, $Ghi, $Glo, $Hhi, $Hlo) =
+ ( "%r1", "%r2", "%r3", "%r4", "%r5", "%r6", "%r7", "%r8",
+ "%r9","%r10","%r11","%r12","%r13","%r14","%r15","%r16");
+$a0 ="%r17";
+$a1 ="%r18";
+$a2 ="%r19";
+$a3 ="%r20";
+$t0 ="%r21";
+$t1 ="%r22";
+$t2 ="%r28";
+$t3 ="%r29";
+$Tbl="%r31";
+
+@X=("%r23","%r24","%r25","%r26"); # zaps $num,$inp,$ctx
+
+sub ROUND_00_15_pa1 {
+my ($i,$ahi,$alo,$bhi,$blo,$chi,$clo,$dhi,$dlo,
+ $ehi,$elo,$fhi,$flo,$ghi,$glo,$hhi,$hlo,$flag)=@_;
+my ($Xhi,$Xlo,$Xnhi,$Xnlo) = @X;
+
+$code.=<<___ if (!$flag);
+ ldw `-$XOFF+8*(($i+1)%16)`(%sp),$Xnhi
+ ldw `-$XOFF+8*(($i+1)%16)+4`(%sp),$Xnlo ; load X[i+1]
+___
+$code.=<<___;
+ shd $ehi,$elo,$Sigma1[0],$t0
+ add $Xlo,$hlo,$hlo
+ shd $elo,$ehi,$Sigma1[0],$t1
+ addc $Xhi,$hhi,$hhi ; h += X[i]
+ shd $ehi,$elo,$Sigma1[1],$t2
+ ldwm 8($Tbl),$Xhi
+ shd $elo,$ehi,$Sigma1[1],$t3
+ ldw -4($Tbl),$Xlo ; load K[i]
+ xor $t2,$t0,$t0
+ xor $t3,$t1,$t1
+ and $flo,$elo,$a0
+ and $fhi,$ehi,$a1
+ shd $ehi,$elo,$Sigma1[2],$t2
+ andcm $glo,$elo,$a2
+ shd $elo,$ehi,$Sigma1[2],$t3
+ andcm $ghi,$ehi,$a3
+ xor $t2,$t0,$t0
+ xor $t3,$t1,$t1 ; Sigma1(e)
+ add $Xlo,$hlo,$hlo
+ xor $a2,$a0,$a0
+ addc $Xhi,$hhi,$hhi ; h += K[i]
+ xor $a3,$a1,$a1 ; Ch(e,f,g)
+
+ add $t0,$hlo,$hlo
+ shd $ahi,$alo,$Sigma0[0],$t0
+ addc $t1,$hhi,$hhi ; h += Sigma1(e)
+ shd $alo,$ahi,$Sigma0[0],$t1
+ add $a0,$hlo,$hlo
+ shd $ahi,$alo,$Sigma0[1],$t2
+ addc $a1,$hhi,$hhi ; h += Ch(e,f,g)
+ shd $alo,$ahi,$Sigma0[1],$t3
+
+ xor $t2,$t0,$t0
+ xor $t3,$t1,$t1
+ shd $ahi,$alo,$Sigma0[2],$t2
+ and $alo,$blo,$a0
+ shd $alo,$ahi,$Sigma0[2],$t3
+ and $ahi,$bhi,$a1
+ xor $t2,$t0,$t0
+ xor $t3,$t1,$t1 ; Sigma0(a)
+
+ and $alo,$clo,$a2
+ and $ahi,$chi,$a3
+ xor $a2,$a0,$a0
+ add $hlo,$dlo,$dlo
+ xor $a3,$a1,$a1
+ addc $hhi,$dhi,$dhi ; d += h
+ and $blo,$clo,$a2
+ add $t0,$hlo,$hlo
+ and $bhi,$chi,$a3
+ addc $t1,$hhi,$hhi ; h += Sigma0(a)
+ xor $a2,$a0,$a0
+ add $a0,$hlo,$hlo
+ xor $a3,$a1,$a1 ; Maj(a,b,c)
+ addc $a1,$hhi,$hhi ; h += Maj(a,b,c)
+
+___
+$code.=<<___ if ($i==15 && $flag);
+ extru $Xlo,31,10,$Xlo
+ comiclr,= $LAST10BITS,$Xlo,%r0
+ b L\$rounds_pa1
+ nop
+___
+push(@X,shift(@X)); push(@X,shift(@X));
+}
+
+sub ROUND_16_xx_pa1 {
+my ($Xhi,$Xlo,$Xnhi,$Xnlo) = @X;
+my ($i)=shift;
+$i-=16;
+$code.=<<___;
+ ldw `-$XOFF+8*(($i+1)%16)`(%sp),$Xnhi
+ ldw `-$XOFF+8*(($i+1)%16)+4`(%sp),$Xnlo ; load X[i+1]
+ ldw `-$XOFF+8*(($i+9)%16)`(%sp),$a1
+ ldw `-$XOFF+8*(($i+9)%16)+4`(%sp),$a0 ; load X[i+9]
+ ldw `-$XOFF+8*(($i+14)%16)`(%sp),$a3
+ ldw `-$XOFF+8*(($i+14)%16)+4`(%sp),$a2 ; load X[i+14]
+ shd $Xnhi,$Xnlo,$sigma0[0],$t0
+ shd $Xnlo,$Xnhi,$sigma0[0],$t1
+ add $a0,$Xlo,$Xlo
+ shd $Xnhi,$Xnlo,$sigma0[1],$t2
+ addc $a1,$Xhi,$Xhi
+ shd $Xnlo,$Xnhi,$sigma0[1],$t3
+ xor $t2,$t0,$t0
+ shd $Xnhi,$Xnlo,$sigma0[2],$t2
+ xor $t3,$t1,$t1
+ extru $Xnhi,`31-$sigma0[2]`,`32-$sigma0[2]`,$t3
+ xor $t2,$t0,$t0
+ shd $a3,$a2,$sigma1[0],$a0
+ xor $t3,$t1,$t1 ; sigma0(X[i+1)&0x0f])
+ shd $a2,$a3,$sigma1[0],$a1
+ add $t0,$Xlo,$Xlo
+ shd $a3,$a2,$sigma1[1],$t2
+ addc $t1,$Xhi,$Xhi
+ shd $a2,$a3,$sigma1[1],$t3
+ xor $t2,$a0,$a0
+ shd $a3,$a2,$sigma1[2],$t2
+ xor $t3,$a1,$a1
+ extru $a3,`31-$sigma1[2]`,`32-$sigma1[2]`,$t3
+ xor $t2,$a0,$a0
+ xor $t3,$a1,$a1 ; sigma0(X[i+14)&0x0f])
+ add $a0,$Xlo,$Xlo
+ addc $a1,$Xhi,$Xhi
+
+ stw $Xhi,`-$XOFF+8*($i%16)`(%sp)
+ stw $Xlo,`-$XOFF+8*($i%16)+4`(%sp)
+___
+&ROUND_00_15_pa1($i,@_,1);
+}
+$code.=<<___;
+ ldw `0*4`($ctx),$Ahi ; load context
+ ldw `1*4`($ctx),$Alo
+ ldw `2*4`($ctx),$Bhi
+ ldw `3*4`($ctx),$Blo
+ ldw `4*4`($ctx),$Chi
+ ldw `5*4`($ctx),$Clo
+ ldw `6*4`($ctx),$Dhi
+ ldw `7*4`($ctx),$Dlo
+ ldw `8*4`($ctx),$Ehi
+ ldw `9*4`($ctx),$Elo
+ ldw `10*4`($ctx),$Fhi
+ ldw `11*4`($ctx),$Flo
+ ldw `12*4`($ctx),$Ghi
+ ldw `13*4`($ctx),$Glo
+ ldw `14*4`($ctx),$Hhi
+ ldw `15*4`($ctx),$Hlo
+
+ extru $inp,31,2,$t0
+ sh3addl $t0,%r0,$t0
+ subi 32,$t0,$t0
+ mtctl $t0,%cr11 ; load %sar with align factor
+
+L\$oop_pa1
+ extru $inp,31,2,$a3
+ comib,= 0,$a3,L\$aligned_pa1
+ sub $inp,$a3,$inp
+
+ ldw `0*4`($inp),$X[0]
+ ldw `1*4`($inp),$X[1]
+ ldw `2*4`($inp),$t2
+ ldw `3*4`($inp),$t3
+ ldw `4*4`($inp),$a0
+ ldw `5*4`($inp),$a1
+ ldw `6*4`($inp),$a2
+ ldw `7*4`($inp),$a3
+ vshd $X[0],$X[1],$X[0]
+ vshd $X[1],$t2,$X[1]
+ stw $X[0],`-$XOFF+0*4`(%sp)
+ ldw `8*4`($inp),$t0
+ vshd $t2,$t3,$t2
+ stw $X[1],`-$XOFF+1*4`(%sp)
+ ldw `9*4`($inp),$t1
+ vshd $t3,$a0,$t3
+___
+{
+my @t=($t2,$t3,$a0,$a1,$a2,$a3,$t0,$t1);
+for ($i=2;$i<=(128/4-8);$i++) {
+$code.=<<___;
+ stw $t[0],`-$XOFF+$i*4`(%sp)
+ ldw `(8+$i)*4`($inp),$t[0]
+ vshd $t[1],$t[2],$t[1]
+___
+push(@t,shift(@t));
+}
+for (;$i<(128/4-1);$i++) {
+$code.=<<___;
+ stw $t[0],`-$XOFF+$i*4`(%sp)
+ vshd $t[1],$t[2],$t[1]
+___
+push(@t,shift(@t));
+}
+$code.=<<___;
+ b L\$collected_pa1
+ stw $t[0],`-$XOFF+$i*4`(%sp)
+
+___
+}
+$code.=<<___;
+L\$aligned_pa1
+ ldw `0*4`($inp),$X[0]
+ ldw `1*4`($inp),$X[1]
+ ldw `2*4`($inp),$t2
+ ldw `3*4`($inp),$t3
+ ldw `4*4`($inp),$a0
+ ldw `5*4`($inp),$a1
+ ldw `6*4`($inp),$a2
+ ldw `7*4`($inp),$a3
+ stw $X[0],`-$XOFF+0*4`(%sp)
+ ldw `8*4`($inp),$t0
+ stw $X[1],`-$XOFF+1*4`(%sp)
+ ldw `9*4`($inp),$t1
+___
+{
+my @t=($t2,$t3,$a0,$a1,$a2,$a3,$t0,$t1);
+for ($i=2;$i<(128/4-8);$i++) {
+$code.=<<___;
+ stw $t[0],`-$XOFF+$i*4`(%sp)
+ ldw `(8+$i)*4`($inp),$t[0]
+___
+push(@t,shift(@t));
+}
+for (;$i<128/4;$i++) {
+$code.=<<___;
+ stw $t[0],`-$XOFF+$i*4`(%sp)
+___
+push(@t,shift(@t));
+}
+$code.="L\$collected_pa1\n";
+}
+
+for($i=0;$i<16;$i++) { &ROUND_00_15_pa1($i,@V); unshift(@V,pop(@V)); unshift(@V,pop(@V)); }
+$code.="L\$rounds_pa1\n";
+for(;$i<32;$i++) { &ROUND_16_xx_pa1($i,@V); unshift(@V,pop(@V)); unshift(@V,pop(@V)); }
+
+$code.=<<___;
+ $POP `-$FRAME_MARKER-2*$SIZE_T`(%sp),$ctx ; restore arguments
+ $POP `-$FRAME_MARKER-3*$SIZE_T`(%sp),$inp
+ $POP `-$FRAME_MARKER-4*$SIZE_T`(%sp),$num
+ ldo `-$rounds*$SZ`($Tbl),$Tbl ; rewind $Tbl
+
+ ldw `0*4`($ctx),$t1 ; update context
+ ldw `1*4`($ctx),$t0
+ ldw `2*4`($ctx),$t3
+ ldw `3*4`($ctx),$t2
+ ldw `4*4`($ctx),$a1
+ ldw `5*4`($ctx),$a0
+ ldw `6*4`($ctx),$a3
+ add $t0,$Alo,$Alo
+ ldw `7*4`($ctx),$a2
+ addc $t1,$Ahi,$Ahi
+ ldw `8*4`($ctx),$t1
+ add $t2,$Blo,$Blo
+ ldw `9*4`($ctx),$t0
+ addc $t3,$Bhi,$Bhi
+ ldw `10*4`($ctx),$t3
+ add $a0,$Clo,$Clo
+ ldw `11*4`($ctx),$t2
+ addc $a1,$Chi,$Chi
+ ldw `12*4`($ctx),$a1
+ add $a2,$Dlo,$Dlo
+ ldw `13*4`($ctx),$a0
+ addc $a3,$Dhi,$Dhi
+ ldw `14*4`($ctx),$a3
+ add $t0,$Elo,$Elo
+ ldw `15*4`($ctx),$a2
+ addc $t1,$Ehi,$Ehi
+ stw $Ahi,`0*4`($ctx)
+ add $t2,$Flo,$Flo
+ stw $Alo,`1*4`($ctx)
+ addc $t3,$Fhi,$Fhi
+ stw $Bhi,`2*4`($ctx)
+ add $a0,$Glo,$Glo
+ stw $Blo,`3*4`($ctx)
+ addc $a1,$Ghi,$Ghi
+ stw $Chi,`4*4`($ctx)
+ add $a2,$Hlo,$Hlo
+ stw $Clo,`5*4`($ctx)
+ addc $a3,$Hhi,$Hhi
+ stw $Dhi,`6*4`($ctx)
+ ldo `16*$SZ`($inp),$inp ; advance $inp
+ stw $Dlo,`7*4`($ctx)
+ stw $Ehi,`8*4`($ctx)
+ stw $Elo,`9*4`($ctx)
+ stw $Fhi,`10*4`($ctx)
+ stw $Flo,`11*4`($ctx)
+ stw $Ghi,`12*4`($ctx)
+ stw $Glo,`13*4`($ctx)
+ stw $Hhi,`14*4`($ctx)
+ comb,= $inp,$num,L\$done
+ stw $Hlo,`15*4`($ctx)
+ b L\$oop_pa1
+ $PUSH $inp,`-$FRAME_MARKER-3*$SIZE_T`(%sp) ; save $inp
+L\$done
+___
+}}
+$code.=<<___;
+ $POP `-$FRAME-$SAVED_RP`(%sp),%r2 ; standard epilogue
+ $POP `-$FRAME+1*$SIZE_T`(%sp),%r4
+ $POP `-$FRAME+2*$SIZE_T`(%sp),%r5
+ $POP `-$FRAME+3*$SIZE_T`(%sp),%r6
+ $POP `-$FRAME+4*$SIZE_T`(%sp),%r7
+ $POP `-$FRAME+5*$SIZE_T`(%sp),%r8
+ $POP `-$FRAME+6*$SIZE_T`(%sp),%r9
+ $POP `-$FRAME+7*$SIZE_T`(%sp),%r10
+ $POP `-$FRAME+8*$SIZE_T`(%sp),%r11
+ $POP `-$FRAME+9*$SIZE_T`(%sp),%r12
+ $POP `-$FRAME+10*$SIZE_T`(%sp),%r13
+ $POP `-$FRAME+11*$SIZE_T`(%sp),%r14
+ $POP `-$FRAME+12*$SIZE_T`(%sp),%r15
+ $POP `-$FRAME+13*$SIZE_T`(%sp),%r16
+ $POP `-$FRAME+14*$SIZE_T`(%sp),%r17
+ $POP `-$FRAME+15*$SIZE_T`(%sp),%r18
+ bv (%r2)
+ .EXIT
+ $POPMB -$FRAME(%sp),%r3
+ .PROCEND
+ .STRINGZ "SHA`64*$SZ` block transform for PA-RISC, CRYPTOGAMS by <appro\@openssl.org>"
+___
+
+# Explicitly encode PA-RISC 2.0 instructions used in this module, so
+# that it can be compiled with .LEVEL 1.0. It should be noted that I
+# wouldn't have to do this, if GNU assembler understood .ALLOW 2.0
+# directive...
+
+my $ldd = sub {
+ my ($mod,$args) = @_;
+ my $orig = "ldd$mod\t$args";
+
+ if ($args =~ /(\-?[0-9]+)\(%r([0-9]+)\),%r([0-9]+)/) # format 3 suffices
+ { my $opcode=(0x14<<26)|($2<<21)|($3<<16)|(($1&0x1FF8)<<1)|(($1>>13)&1);
+ $opcode|=(1<<3) if ($mod =~ /^,m/);
+ $opcode|=(1<<2) if ($mod =~ /^,mb/);
+ sprintf "\t.WORD\t0x%08x\t; %s",$opcode,$orig;
+ }
+ else { "\t".$orig; }
+};
+
+my $std = sub {
+ my ($mod,$args) = @_;
+ my $orig = "std$mod\t$args";
+
+ if ($args =~ /%r([0-9]+),(\-?[0-9]+)\(%r([0-9]+)\)/) # format 3 suffices
+ { my $opcode=(0x1c<<26)|($3<<21)|($1<<16)|(($2&0x1FF8)<<1)|(($2>>13)&1);
+ sprintf "\t.WORD\t0x%08x\t; %s",$opcode,$orig;
+ }
+ else { "\t".$orig; }
+};
+
+my $extrd = sub {
+ my ($mod,$args) = @_;
+ my $orig = "extrd$mod\t$args";
+
+ # I only have ",u" completer, it's implicitly encoded...
+ if ($args =~ /%r([0-9]+),([0-9]+),([0-9]+),%r([0-9]+)/) # format 15
+ { my $opcode=(0x36<<26)|($1<<21)|($4<<16);
+ my $len=32-$3;
+ $opcode |= (($2&0x20)<<6)|(($2&0x1f)<<5); # encode pos
+ $opcode |= (($len&0x20)<<7)|($len&0x1f); # encode len
+ sprintf "\t.WORD\t0x%08x\t; %s",$opcode,$orig;
+ }
+ elsif ($args =~ /%r([0-9]+),%sar,([0-9]+),%r([0-9]+)/) # format 12
+ { my $opcode=(0x34<<26)|($1<<21)|($3<<16)|(2<<11)|(1<<9);
+ my $len=32-$2;
+ $opcode |= (($len&0x20)<<3)|($len&0x1f); # encode len
+ $opcode |= (1<<13) if ($mod =~ /,\**=/);
+ sprintf "\t.WORD\t0x%08x\t; %s",$opcode,$orig;
+ }
+ else { "\t".$orig; }
+};
+
+my $shrpd = sub {
+ my ($mod,$args) = @_;
+ my $orig = "shrpd$mod\t$args";
+
+ if ($args =~ /%r([0-9]+),%r([0-9]+),([0-9]+),%r([0-9]+)/) # format 14
+ { my $opcode=(0x34<<26)|($2<<21)|($1<<16)|(1<<10)|$4;
+ my $cpos=63-$3;
+ $opcode |= (($cpos&0x20)<<6)|(($cpos&0x1f)<<5); # encode sa
+ sprintf "\t.WORD\t0x%08x\t; %s",$opcode,$orig;
+ }
+ elsif ($args =~ /%r([0-9]+),%r([0-9]+),%sar,%r([0-9]+)/) # format 11
+ { sprintf "\t.WORD\t0x%08x\t; %s",
+ (0x34<<26)|($2<<21)|($1<<16)|(1<<9)|$3,$orig;
+ }
+ else { "\t".$orig; }
+};
+
+sub assemble {
+ my ($mnemonic,$mod,$args)=@_;
+ my $opcode = eval("\$$mnemonic");
+
+ ref($opcode) eq 'CODE' ? &$opcode($mod,$args) : "\t$mnemonic$mod\t$args";
+}
+
+foreach (split("\n",$code)) {
+ s/\`([^\`]*)\`/eval $1/ge;
+
+ s/shd\s+(%r[0-9]+),(%r[0-9]+),([0-9]+)/
+ $3>31 ? sprintf("shd\t%$2,%$1,%d",$3-32) # rotation for >=32
+ : sprintf("shd\t%$1,%$2,%d",$3)/e or
+ # translate made up instructons: _ror, _shr, _align, _shl
+ s/_ror(\s+)(%r[0-9]+),/
+ ($SZ==4 ? "shd" : "shrpd")."$1$2,$2,"/e or
+
+ s/_shr(\s+%r[0-9]+),([0-9]+),/
+ $SZ==4 ? sprintf("extru%s,%d,%d,",$1,31-$2,32-$2)
+ : sprintf("extrd,u%s,%d,%d,",$1,63-$2,64-$2)/e or
+
+ s/_align(\s+%r[0-9]+,%r[0-9]+),/
+ ($SZ==4 ? "vshd$1," : "shrpd$1,%sar,")/e or
+
+ s/_shl(\s+%r[0-9]+),([0-9]+),/
+ $SIZE_T==4 ? sprintf("zdep%s,%d,%d,",$1,31-$2,32-$2)
+ : sprintf("depd,z%s,%d,%d,",$1,63-$2,64-$2)/e;
+
+ s/^\s+([a-z]+)([\S]*)\s+([\S]*)/&assemble($1,$2,$3)/e if ($SIZE_T==4);
+
+ s/cmpb,\*/comb,/ if ($SIZE_T==4);
+
+ print $_,"\n";
+}
+
+close STDOUT;
diff --git a/openssl/crypto/sha/asm/sha512-ppc.pl b/openssl/crypto/sha/asm/sha512-ppc.pl
index 768a6a6fa..6b44a68e5 100644
--- a/openssl/crypto/sha/asm/sha512-ppc.pl
+++ b/openssl/crypto/sha/asm/sha512-ppc.pl
@@ -40,6 +40,7 @@ $output =shift;
if ($flavour =~ /64/) {
$SIZE_T=8;
+ $LRSAVE=2*$SIZE_T;
$STU="stdu";
$UCMP="cmpld";
$SHL="sldi";
@@ -47,6 +48,7 @@ if ($flavour =~ /64/) {
$PUSH="std";
} elsif ($flavour =~ /32/) {
$SIZE_T=4;
+ $LRSAVE=$SIZE_T;
$STU="stwu";
$UCMP="cmplw";
$SHL="slwi";
@@ -87,7 +89,8 @@ if ($output =~ /512/) {
$SHR="srwi";
}
-$FRAME=32*$SIZE_T;
+$FRAME=32*$SIZE_T+16*$SZ;
+$LOCALS=6*$SIZE_T;
$sp ="r1";
$toc="r2";
@@ -179,13 +182,12 @@ $code=<<___;
.globl $func
.align 6
$func:
+ $STU $sp,-$FRAME($sp)
mflr r0
- $STU $sp,`-($FRAME+16*$SZ)`($sp)
$SHL $num,$num,`log(16*$SZ)/log(2)`
$PUSH $ctx,`$FRAME-$SIZE_T*22`($sp)
- $PUSH r0,`$FRAME-$SIZE_T*21`($sp)
$PUSH $toc,`$FRAME-$SIZE_T*20`($sp)
$PUSH r13,`$FRAME-$SIZE_T*19`($sp)
$PUSH r14,`$FRAME-$SIZE_T*18`($sp)
@@ -206,6 +208,7 @@ $func:
$PUSH r29,`$FRAME-$SIZE_T*3`($sp)
$PUSH r30,`$FRAME-$SIZE_T*2`($sp)
$PUSH r31,`$FRAME-$SIZE_T*1`($sp)
+ $PUSH r0,`$FRAME+$LRSAVE`($sp)
$LD $A,`0*$SZ`($ctx)
mr $inp,r4 ; incarnate $inp
@@ -217,7 +220,7 @@ $func:
$LD $G,`6*$SZ`($ctx)
$LD $H,`7*$SZ`($ctx)
- b LPICmeup
+ bl LPICmeup
LPICedup:
andi. r0,$inp,3
bne Lunaligned
@@ -226,40 +229,14 @@ Laligned:
$PUSH $num,`$FRAME-$SIZE_T*24`($sp) ; end pointer
$PUSH $inp,`$FRAME-$SIZE_T*23`($sp) ; inp pointer
bl Lsha2_block_private
-Ldone:
- $POP r0,`$FRAME-$SIZE_T*21`($sp)
- $POP $toc,`$FRAME-$SIZE_T*20`($sp)
- $POP r13,`$FRAME-$SIZE_T*19`($sp)
- $POP r14,`$FRAME-$SIZE_T*18`($sp)
- $POP r15,`$FRAME-$SIZE_T*17`($sp)
- $POP r16,`$FRAME-$SIZE_T*16`($sp)
- $POP r17,`$FRAME-$SIZE_T*15`($sp)
- $POP r18,`$FRAME-$SIZE_T*14`($sp)
- $POP r19,`$FRAME-$SIZE_T*13`($sp)
- $POP r20,`$FRAME-$SIZE_T*12`($sp)
- $POP r21,`$FRAME-$SIZE_T*11`($sp)
- $POP r22,`$FRAME-$SIZE_T*10`($sp)
- $POP r23,`$FRAME-$SIZE_T*9`($sp)
- $POP r24,`$FRAME-$SIZE_T*8`($sp)
- $POP r25,`$FRAME-$SIZE_T*7`($sp)
- $POP r26,`$FRAME-$SIZE_T*6`($sp)
- $POP r27,`$FRAME-$SIZE_T*5`($sp)
- $POP r28,`$FRAME-$SIZE_T*4`($sp)
- $POP r29,`$FRAME-$SIZE_T*3`($sp)
- $POP r30,`$FRAME-$SIZE_T*2`($sp)
- $POP r31,`$FRAME-$SIZE_T*1`($sp)
- mtlr r0
- addi $sp,$sp,`$FRAME+16*$SZ`
- blr
-___
+ b Ldone
-# PowerPC specification allows an implementation to be ill-behaved
-# upon unaligned access which crosses page boundary. "Better safe
-# than sorry" principle makes me treat it specially. But I don't
-# look for particular offending word, but rather for the input
-# block which crosses the boundary. Once found that block is aligned
-# and hashed separately...
-$code.=<<___;
+; PowerPC specification allows an implementation to be ill-behaved
+; upon unaligned access which crosses page boundary. "Better safe
+; than sorry" principle makes me treat it specially. But I don't
+; look for particular offending word, but rather for the input
+; block which crosses the boundary. Once found that block is aligned
+; and hashed separately...
.align 4
Lunaligned:
subfic $t1,$inp,4096
@@ -278,7 +255,7 @@ Lunaligned:
Lcross_page:
li $t1,`16*$SZ/4`
mtctr $t1
- addi r20,$sp,$FRAME ; aligned spot below the frame
+ addi r20,$sp,$LOCALS ; aligned spot below the frame
Lmemcpy:
lbz r16,0($inp)
lbz r17,1($inp)
@@ -293,8 +270,8 @@ Lmemcpy:
bdnz Lmemcpy
$PUSH $inp,`$FRAME-$SIZE_T*26`($sp) ; save real inp
- addi $t1,$sp,`$FRAME+16*$SZ` ; fictitious end pointer
- addi $inp,$sp,$FRAME ; fictitious inp pointer
+ addi $t1,$sp,`$LOCALS+16*$SZ` ; fictitious end pointer
+ addi $inp,$sp,$LOCALS ; fictitious inp pointer
$PUSH $num,`$FRAME-$SIZE_T*25`($sp) ; save real num
$PUSH $t1,`$FRAME-$SIZE_T*24`($sp) ; end pointer
$PUSH $inp,`$FRAME-$SIZE_T*23`($sp) ; inp pointer
@@ -303,10 +280,36 @@ Lmemcpy:
$POP $num,`$FRAME-$SIZE_T*25`($sp) ; restore real num
addic. $num,$num,`-16*$SZ` ; num--
bne- Lunaligned
- b Ldone
-___
-$code.=<<___;
+Ldone:
+ $POP r0,`$FRAME+$LRSAVE`($sp)
+ $POP $toc,`$FRAME-$SIZE_T*20`($sp)
+ $POP r13,`$FRAME-$SIZE_T*19`($sp)
+ $POP r14,`$FRAME-$SIZE_T*18`($sp)
+ $POP r15,`$FRAME-$SIZE_T*17`($sp)
+ $POP r16,`$FRAME-$SIZE_T*16`($sp)
+ $POP r17,`$FRAME-$SIZE_T*15`($sp)
+ $POP r18,`$FRAME-$SIZE_T*14`($sp)
+ $POP r19,`$FRAME-$SIZE_T*13`($sp)
+ $POP r20,`$FRAME-$SIZE_T*12`($sp)
+ $POP r21,`$FRAME-$SIZE_T*11`($sp)
+ $POP r22,`$FRAME-$SIZE_T*10`($sp)
+ $POP r23,`$FRAME-$SIZE_T*9`($sp)
+ $POP r24,`$FRAME-$SIZE_T*8`($sp)
+ $POP r25,`$FRAME-$SIZE_T*7`($sp)
+ $POP r26,`$FRAME-$SIZE_T*6`($sp)
+ $POP r27,`$FRAME-$SIZE_T*5`($sp)
+ $POP r28,`$FRAME-$SIZE_T*4`($sp)
+ $POP r29,`$FRAME-$SIZE_T*3`($sp)
+ $POP r30,`$FRAME-$SIZE_T*2`($sp)
+ $POP r31,`$FRAME-$SIZE_T*1`($sp)
+ mtlr r0
+ addi $sp,$sp,$FRAME
+ blr
+ .long 0
+ .byte 0,12,4,1,0x80,18,3,0
+ .long 0
+
.align 4
Lsha2_block_private:
___
@@ -372,6 +375,8 @@ $code.=<<___;
$ST $H,`7*$SZ`($ctx)
bne Lsha2_block_private
blr
+ .long 0
+ .byte 0,12,0x14,0,0,0,0,0
___
# Ugly hack here, because PPC assembler syntax seem to vary too
@@ -379,22 +384,15 @@ ___
$code.=<<___;
.align 6
LPICmeup:
- bl LPIC
- addi $Tbl,$Tbl,`64-4` ; "distance" between . and last nop
- b LPICedup
- nop
- nop
- nop
- nop
- nop
-LPIC: mflr $Tbl
+ mflr r0
+ bcl 20,31,\$+4
+ mflr $Tbl ; vvvvvv "distance" between . and 1st data entry
+ addi $Tbl,$Tbl,`64-8`
+ mtlr r0
blr
- nop
- nop
- nop
- nop
- nop
- nop
+ .long 0
+ .byte 0,12,0x14,0,0,0,0,0
+ .space `64-9*4`
___
$code.=<<___ if ($SZ==8);
.long 0x428a2f98,0xd728ae22,0x71374491,0x23ef65cd
diff --git a/openssl/crypto/sha/asm/sha512-s390x.pl b/openssl/crypto/sha/asm/sha512-s390x.pl
index e7ef2d5a9..079a3fc78 100644
--- a/openssl/crypto/sha/asm/sha512-s390x.pl
+++ b/openssl/crypto/sha/asm/sha512-s390x.pl
@@ -26,6 +26,26 @@
# favour dual-issue z10 pipeline. Hardware SHA256/512 is ~4.7x faster
# than software.
+# November 2010.
+#
+# Adapt for -m31 build. If kernel supports what's called "highgprs"
+# feature on Linux [see /proc/cpuinfo], it's possible to use 64-bit
+# instructions and achieve "64-bit" performance even in 31-bit legacy
+# application context. The feature is not specific to any particular
+# processor, as long as it's "z-CPU". Latter implies that the code
+# remains z/Architecture specific. On z900 SHA256 was measured to
+# perform 2.4x and SHA512 - 13x better than code generated by gcc 4.3.
+
+$flavour = shift;
+
+if ($flavour =~ /3[12]/) {
+ $SIZE_T=4;
+ $g="";
+} else {
+ $SIZE_T=8;
+ $g="g";
+}
+
$t0="%r0";
$t1="%r1";
$ctx="%r2"; $t2="%r2";
@@ -44,7 +64,7 @@ $tbl="%r13";
$T1="%r14";
$sp="%r15";
-$output=shift;
+while (($output=shift) && ($output!~/^\w[\w\-]*\.\w+$/)) {}
open STDOUT,">$output";
if ($output =~ /512/) {
@@ -78,7 +98,8 @@ if ($output =~ /512/) {
}
$Func="sha${label}_block_data_order";
$Table="K${label}";
-$frame=160+16*$SZ;
+$stdframe=16*$SIZE_T+4*8;
+$frame=$stdframe+16*$SZ;
sub BODY_00_15 {
my ($i,$a,$b,$c,$d,$e,$f,$g,$h) = @_;
@@ -93,9 +114,9 @@ $code.=<<___;
xgr $t0,$t1
$ROT $t1,$t1,`$Sigma1[2]-$Sigma1[1]`
xgr $t2,$g
- $ST $T1,`160+$SZ*($i%16)`($sp)
+ $ST $T1,`$stdframe+$SZ*($i%16)`($sp)
xgr $t0,$t1 # Sigma1(e)
- la $T1,0($T1,$h) # T1+=h
+ algr $T1,$h # T1+=h
ngr $t2,$e
lgr $t1,$a
algr $T1,$t0 # T1+=Sigma1(e)
@@ -113,7 +134,7 @@ $code.=<<___;
ngr $t2,$b
algr $h,$T1 # h+=T1
ogr $t2,$t1 # Maj(a,b,c)
- la $d,0($d,$T1) # d+=T1
+ algr $d,$T1 # d+=T1
algr $h,$t2 # h+=Maj(a,b,c)
___
}
@@ -122,19 +143,19 @@ sub BODY_16_XX {
my ($i,$a,$b,$c,$d,$e,$f,$g,$h) = @_;
$code.=<<___;
- $LD $T1,`160+$SZ*(($i+1)%16)`($sp) ### $i
- $LD $t1,`160+$SZ*(($i+14)%16)`($sp)
+ $LD $T1,`$stdframe+$SZ*(($i+1)%16)`($sp) ### $i
+ $LD $t1,`$stdframe+$SZ*(($i+14)%16)`($sp)
$ROT $t0,$T1,$sigma0[0]
$SHR $T1,$sigma0[2]
$ROT $t2,$t0,`$sigma0[1]-$sigma0[0]`
xgr $T1,$t0
$ROT $t0,$t1,$sigma1[0]
- xgr $T1,$t2 # sigma0(X[i+1])
+ xgr $T1,$t2 # sigma0(X[i+1])
$SHR $t1,$sigma1[2]
- $ADD $T1,`160+$SZ*($i%16)`($sp) # +=X[i]
+ $ADD $T1,`$stdframe+$SZ*($i%16)`($sp) # +=X[i]
xgr $t1,$t0
$ROT $t0,$t0,`$sigma1[1]-$sigma1[0]`
- $ADD $T1,`160+$SZ*(($i+9)%16)`($sp) # +=X[i+9]
+ $ADD $T1,`$stdframe+$SZ*(($i+9)%16)`($sp) # +=X[i+9]
xgr $t1,$t0 # sigma1(X[i+14])
algr $T1,$t1 # +=sigma1(X[i+14])
___
@@ -212,6 +233,7 @@ $code.=<<___;
.globl $Func
.type $Func,\@function
$Func:
+ sllg $len,$len,`log(16*$SZ)/log(2)`
___
$code.=<<___ if ($kimdfunc);
larl %r1,OPENSSL_s390xcap_P
@@ -219,15 +241,15 @@ $code.=<<___ if ($kimdfunc);
tmhl %r0,0x4000 # check for message-security assist
jz .Lsoftware
lghi %r0,0
- la %r1,16($sp)
+ la %r1,`2*$SIZE_T`($sp)
.long 0xb93e0002 # kimd %r0,%r2
- lg %r0,16($sp)
+ lg %r0,`2*$SIZE_T`($sp)
tmhh %r0,`0x8000>>$kimdfunc`
jz .Lsoftware
lghi %r0,$kimdfunc
lgr %r1,$ctx
lgr %r2,$inp
- sllg %r3,$len,`log(16*$SZ)/log(2)`
+ lgr %r3,$len
.long 0xb93e0002 # kimd %r0,%r2
brc 1,.-4 # pay attention to "partial completion"
br %r14
@@ -235,13 +257,12 @@ $code.=<<___ if ($kimdfunc);
.Lsoftware:
___
$code.=<<___;
- sllg $len,$len,`log(16*$SZ)/log(2)`
lghi %r1,-$frame
- agr $len,$inp
- stmg $ctx,%r15,16($sp)
+ la $len,0($len,$inp)
+ stm${g} $ctx,%r15,`2*$SIZE_T`($sp)
lgr %r0,$sp
la $sp,0(%r1,$sp)
- stg %r0,0($sp)
+ st${g} %r0,0($sp)
larl $tbl,$Table
$LD $A,`0*$SZ`($ctx)
@@ -265,7 +286,7 @@ $code.=<<___;
clgr $len,$t0
jne .Lrounds_16_xx
- lg $ctx,`$frame+16`($sp)
+ l${g} $ctx,`$frame+2*$SIZE_T`($sp)
la $inp,`16*$SZ`($inp)
$ADD $A,`0*$SZ`($ctx)
$ADD $B,`1*$SZ`($ctx)
@@ -283,14 +304,14 @@ $code.=<<___;
$ST $F,`5*$SZ`($ctx)
$ST $G,`6*$SZ`($ctx)
$ST $H,`7*$SZ`($ctx)
- clg $inp,`$frame+32`($sp)
+ cl${g} $inp,`$frame+4*$SIZE_T`($sp)
jne .Lloop
- lmg %r6,%r15,`$frame+48`($sp)
+ lm${g} %r6,%r15,`$frame+6*$SIZE_T`($sp)
br %r14
.size $Func,.-$Func
.string "SHA${label} block transform for s390x, CRYPTOGAMS by <appro\@openssl.org>"
-.comm OPENSSL_s390xcap_P,8,8
+.comm OPENSSL_s390xcap_P,16,8
___
$code =~ s/\`([^\`]*)\`/eval $1/gem;
diff --git a/openssl/crypto/sha/asm/sha512-sparcv9.pl b/openssl/crypto/sha/asm/sha512-sparcv9.pl
index ec5d78135..585740789 100644
--- a/openssl/crypto/sha/asm/sha512-sparcv9.pl
+++ b/openssl/crypto/sha/asm/sha512-sparcv9.pl
@@ -305,9 +305,9 @@ $code.=<<___;
srlx @X[(($i+9)/2)%8],32,$tmp1 ! X[i+9]
xor $tmp0,$tmp2,$tmp2 ! sigma1(X[i+14])
srl @X[($i/2)%8],0,$tmp0
+ add $tmp2,$tmp1,$tmp1
add $xi,$T1,$T1 ! +=X[i]
xor $tmp0,@X[($i/2)%8],@X[($i/2)%8]
- add $tmp2,$T1,$T1
add $tmp1,$T1,$T1
srl $T1,0,$T1
@@ -318,9 +318,9 @@ ___
$code.=<<___;
srlx @X[($i/2)%8],32,$tmp1 ! X[i]
xor $tmp0,$tmp2,$tmp2 ! sigma1(X[i+14])
- srl @X[($i/2)%8],0,@X[($i/2)%8]
add $xi,$T1,$T1 ! +=X[i+9]
- add $tmp2,$T1,$T1
+ add $tmp2,$tmp1,$tmp1
+ srl @X[($i/2)%8],0,@X[($i/2)%8]
add $tmp1,$T1,$T1
sllx $T1,32,$tmp0
diff --git a/openssl/crypto/sha/asm/sha512-x86_64.pl b/openssl/crypto/sha/asm/sha512-x86_64.pl
index e6643f8cf..f611a2d89 100644
--- a/openssl/crypto/sha/asm/sha512-x86_64.pl
+++ b/openssl/crypto/sha/asm/sha512-x86_64.pl
@@ -95,50 +95,44 @@ sub ROUND_00_15()
{ my ($i,$a,$b,$c,$d,$e,$f,$g,$h) = @_;
$code.=<<___;
- mov $e,$a0
- mov $e,$a1
+ ror \$`$Sigma1[2]-$Sigma1[1]`,$a0
mov $f,$a2
+ mov $T1,`$SZ*($i&0xf)`(%rsp)
- ror \$$Sigma1[0],$a0
- ror \$$Sigma1[1],$a1
+ ror \$`$Sigma0[2]-$Sigma0[1]`,$a1
+ xor $e,$a0
xor $g,$a2 # f^g
- xor $a1,$a0
- ror \$`$Sigma1[2]-$Sigma1[1]`,$a1
+ ror \$`$Sigma1[1]-$Sigma1[0]`,$a0
+ add $h,$T1 # T1+=h
+ xor $a,$a1
+
+ add ($Tbl,$round,$SZ),$T1 # T1+=K[round]
and $e,$a2 # (f^g)&e
- mov $T1,`$SZ*($i&0xf)`(%rsp)
+ mov $b,$h
- xor $a1,$a0 # Sigma1(e)
+ ror \$`$Sigma0[1]-$Sigma0[0]`,$a1
+ xor $e,$a0
xor $g,$a2 # Ch(e,f,g)=((f^g)&e)^g
- add $h,$T1 # T1+=h
-
- mov $a,$h
- add $a0,$T1 # T1+=Sigma1(e)
+ xor $c,$h # b^c
+ xor $a,$a1
add $a2,$T1 # T1+=Ch(e,f,g)
- mov $a,$a0
- mov $a,$a1
+ mov $b,$a2
- ror \$$Sigma0[0],$h
- ror \$$Sigma0[1],$a0
- mov $a,$a2
- add ($Tbl,$round,$SZ),$T1 # T1+=K[round]
+ ror \$$Sigma1[0],$a0 # Sigma1(e)
+ and $a,$h # h=(b^c)&a
+ and $c,$a2 # b&c
- xor $a0,$h
- ror \$`$Sigma0[2]-$Sigma0[1]`,$a0
- or $c,$a1 # a|c
+ ror \$$Sigma0[0],$a1 # Sigma0(a)
+ add $a0,$T1 # T1+=Sigma1(e)
+ add $a2,$h # h+=b&c (completes +=Maj(a,b,c)
- xor $a0,$h # h=Sigma0(a)
- and $c,$a2 # a&c
add $T1,$d # d+=T1
-
- and $b,$a1 # (a|c)&b
add $T1,$h # h+=T1
-
- or $a2,$a1 # Maj(a,b,c)=((a|c)&b)|(a&c)
lea 1($round),$round # round++
+ add $a1,$h # h+=Sigma0(a)
- add $a1,$h # h+=Maj(a,b,c)
___
}
@@ -147,32 +141,30 @@ sub ROUND_16_XX()
$code.=<<___;
mov `$SZ*(($i+1)&0xf)`(%rsp),$a0
- mov `$SZ*(($i+14)&0xf)`(%rsp),$T1
-
- mov $a0,$a2
+ mov `$SZ*(($i+14)&0xf)`(%rsp),$a1
+ mov $a0,$T1
+ mov $a1,$a2
+ ror \$`$sigma0[1]-$sigma0[0]`,$T1
+ xor $a0,$T1
shr \$$sigma0[2],$a0
- ror \$$sigma0[0],$a2
-
- xor $a2,$a0
- ror \$`$sigma0[1]-$sigma0[0]`,$a2
- xor $a2,$a0 # sigma0(X[(i+1)&0xf])
- mov $T1,$a1
+ ror \$$sigma0[0],$T1
+ xor $T1,$a0 # sigma0(X[(i+1)&0xf])
+ mov `$SZ*(($i+9)&0xf)`(%rsp),$T1
- shr \$$sigma1[2],$T1
- ror \$$sigma1[0],$a1
-
- xor $a1,$T1
- ror \$`$sigma1[1]-$sigma1[0]`,$a1
-
- xor $a1,$T1 # sigma1(X[(i+14)&0xf])
+ ror \$`$sigma1[1]-$sigma1[0]`,$a2
+ xor $a1,$a2
+ shr \$$sigma1[2],$a1
+ ror \$$sigma1[0],$a2
add $a0,$T1
-
- add `$SZ*(($i+9)&0xf)`(%rsp),$T1
+ xor $a2,$a1 # sigma1(X[(i+14)&0xf])
add `$SZ*($i&0xf)`(%rsp),$T1
+ mov $e,$a0
+ add $a1,$T1
+ mov $a,$a1
___
&ROUND_00_15(@_);
}
@@ -219,6 +211,8 @@ $func:
___
for($i=0;$i<16;$i++) {
$code.=" mov $SZ*$i($inp),$T1\n";
+ $code.=" mov @ROT[4],$a0\n";
+ $code.=" mov @ROT[0],$a1\n";
$code.=" bswap $T1\n";
&ROUND_00_15($i,@ROT);
unshift(@ROT,pop(@ROT));
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-20 02:58:50 +0000