aboutsummaryrefslogtreecommitdiff
path: root/openssl/crypto
diff options
context:
space:
mode:
Diffstat (limited to 'openssl/crypto')
-rw-r--r--openssl/crypto/.gitignore2
-rw-r--r--openssl/crypto/cryptlib.c2
-rw-r--r--openssl/crypto/opensslconf.h235
3 files changed, 3 insertions, 236 deletions
diff --git a/openssl/crypto/.gitignore b/openssl/crypto/.gitignore
new file mode 100644
index 000000000..966fd5d48
--- /dev/null
+++ b/openssl/crypto/.gitignore
@@ -0,0 +1,2 @@
+buildinf.h
+opensslconf.h \ No newline at end of file
diff --git a/openssl/crypto/cryptlib.c b/openssl/crypto/cryptlib.c
index 0b77d8b7d..50cec9fbe 100644
--- a/openssl/crypto/cryptlib.c
+++ b/openssl/crypto/cryptlib.c
@@ -710,7 +710,7 @@ void OPENSSL_cpuid_setup(void)
* was initialized already... This is to avoid interference
* with cpuid snippets in ELF .init segment.
*/
- OPENSSL_ia32cap_P[0] = (unsigned int)vec|(1<<10);
+ OPENSSL_ia32cap_P[0] = (unsigned int)((vec|(1<<10))&0xffffffff);
OPENSSL_ia32cap_P[1] = (unsigned int)(vec>>32);
}
#endif
diff --git a/openssl/crypto/opensslconf.h b/openssl/crypto/opensslconf.h
deleted file mode 100644
index 57abb87d9..000000000
--- a/openssl/crypto/opensslconf.h
+++ /dev/null
@@ -1,235 +0,0 @@
-/* opensslconf.h */
-/* WARNING: Generated automatically from opensslconf.h.in by Configure. */
-
-/* OpenSSL was configured with the following options: */
-#ifndef OPENSSL_DOING_MAKEDEPEND
-
-
-#ifndef OPENSSL_NO_EC_NISTP_64_GCC_128
-# define OPENSSL_NO_EC_NISTP_64_GCC_128
-#endif
-#ifndef OPENSSL_NO_GMP
-# define OPENSSL_NO_GMP
-#endif
-#ifndef OPENSSL_NO_JPAKE
-# define OPENSSL_NO_JPAKE
-#endif
-#ifndef OPENSSL_NO_KRB5
-# define OPENSSL_NO_KRB5
-#endif
-#ifndef OPENSSL_NO_MD2
-# define OPENSSL_NO_MD2
-#endif
-#ifndef OPENSSL_NO_RC5
-# define OPENSSL_NO_RC5
-#endif
-#ifndef OPENSSL_NO_RFC3779
-# define OPENSSL_NO_RFC3779
-#endif
-#ifndef OPENSSL_NO_SCTP
-# define OPENSSL_NO_SCTP
-#endif
-#ifndef OPENSSL_NO_STORE
-# define OPENSSL_NO_STORE
-#endif
-#ifndef OPENSSL_NO_UNIT_TEST
-# define OPENSSL_NO_UNIT_TEST
-#endif
-
-#endif /* OPENSSL_DOING_MAKEDEPEND */
-
-#ifndef OPENSSL_NO_DYNAMIC_ENGINE
-# define OPENSSL_NO_DYNAMIC_ENGINE
-#endif
-
-/* The OPENSSL_NO_* macros are also defined as NO_* if the application
- asks for it. This is a transient feature that is provided for those
- who haven't had the time to do the appropriate changes in their
- applications. */
-#ifdef OPENSSL_ALGORITHM_DEFINES
-# if defined(OPENSSL_NO_EC_NISTP_64_GCC_128) && !defined(NO_EC_NISTP_64_GCC_128)
-# define NO_EC_NISTP_64_GCC_128
-# endif
-# if defined(OPENSSL_NO_GMP) && !defined(NO_GMP)
-# define NO_GMP
-# endif
-# if defined(OPENSSL_NO_JPAKE) && !defined(NO_JPAKE)
-# define NO_JPAKE
-# endif
-# if defined(OPENSSL_NO_KRB5) && !defined(NO_KRB5)
-# define NO_KRB5
-# endif
-# if defined(OPENSSL_NO_MD2) && !defined(NO_MD2)
-# define NO_MD2
-# endif
-# if defined(OPENSSL_NO_RC5) && !defined(NO_RC5)
-# define NO_RC5
-# endif
-# if defined(OPENSSL_NO_RFC3779) && !defined(NO_RFC3779)
-# define NO_RFC3779
-# endif
-# if defined(OPENSSL_NO_SCTP) && !defined(NO_SCTP)
-# define NO_SCTP
-# endif
-# if defined(OPENSSL_NO_STORE) && !defined(NO_STORE)
-# define NO_STORE
-# endif
-# if defined(OPENSSL_NO_UNIT_TEST) && !defined(NO_UNIT_TEST)
-# define NO_UNIT_TEST
-# endif
-#endif
-
-/* crypto/opensslconf.h.in */
-
-/* Generate 80386 code? */
-#undef I386_ONLY
-
-#if !(defined(VMS) || defined(__VMS)) /* VMS uses logical names instead */
-#if defined(HEADER_CRYPTLIB_H) && !defined(OPENSSLDIR)
-#define ENGINESDIR "/usr/local/ssl/lib/engines"
-#define OPENSSLDIR "/usr/local/ssl"
-#endif
-#endif
-
-#undef OPENSSL_UNISTD
-#define OPENSSL_UNISTD <unistd.h>
-
-#undef OPENSSL_EXPORT_VAR_AS_FUNCTION
-
-#if defined(HEADER_IDEA_H) && !defined(IDEA_INT)
-#define IDEA_INT unsigned int
-#endif
-
-#if defined(HEADER_MD2_H) && !defined(MD2_INT)
-#define MD2_INT unsigned int
-#endif
-
-#if defined(HEADER_RC2_H) && !defined(RC2_INT)
-/* I need to put in a mod for the alpha - eay */
-#define RC2_INT unsigned int
-#endif
-
-#if defined(HEADER_RC4_H)
-#if !defined(RC4_INT)
-/* using int types make the structure larger but make the code faster
- * on most boxes I have tested - up to %20 faster. */
-/*
- * I don't know what does "most" mean, but declaring "int" is a must on:
- * - Intel P6 because partial register stalls are very expensive;
- * - elder Alpha because it lacks byte load/store instructions;
- */
-#define RC4_INT unsigned int
-#endif
-#if !defined(RC4_CHUNK)
-/*
- * This enables code handling data aligned at natural CPU word
- * boundary. See crypto/rc4/rc4_enc.c for further details.
- */
-#undef RC4_CHUNK
-#endif
-#endif
-
-#if (defined(HEADER_NEW_DES_H) || defined(HEADER_DES_H)) && !defined(DES_LONG)
-/* If this is set to 'unsigned int' on a DEC Alpha, this gives about a
- * %20 speed up (longs are 8 bytes, int's are 4). */
-#ifndef DES_LONG
-#define DES_LONG unsigned long
-#endif
-#endif
-
-#if defined(HEADER_BN_H) && !defined(CONFIG_HEADER_BN_H)
-#define CONFIG_HEADER_BN_H
-#undef BN_LLONG
-
-/* Should we define BN_DIV2W here? */
-
-/* Only one for the following should be defined */
-#undef SIXTY_FOUR_BIT_LONG
-#undef SIXTY_FOUR_BIT
-#define THIRTY_TWO_BIT
-#endif
-
-#if defined(HEADER_RC4_LOCL_H) && !defined(CONFIG_HEADER_RC4_LOCL_H)
-#define CONFIG_HEADER_RC4_LOCL_H
-/* if this is defined data[i] is used instead of *data, this is a %20
- * speedup on x86 */
-#undef RC4_INDEX
-#endif
-
-#if defined(HEADER_BF_LOCL_H) && !defined(CONFIG_HEADER_BF_LOCL_H)
-#define CONFIG_HEADER_BF_LOCL_H
-#undef BF_PTR
-#endif /* HEADER_BF_LOCL_H */
-
-#if defined(HEADER_DES_LOCL_H) && !defined(CONFIG_HEADER_DES_LOCL_H)
-#define CONFIG_HEADER_DES_LOCL_H
-#ifndef DES_DEFAULT_OPTIONS
-/* the following is tweaked from a config script, that is why it is a
- * protected undef/define */
-#ifndef DES_PTR
-#undef DES_PTR
-#endif
-
-/* This helps C compiler generate the correct code for multiple functional
- * units. It reduces register dependancies at the expense of 2 more
- * registers */
-#ifndef DES_RISC1
-#undef DES_RISC1
-#endif
-
-#ifndef DES_RISC2
-#undef DES_RISC2
-#endif
-
-#if defined(DES_RISC1) && defined(DES_RISC2)
-YOU SHOULD NOT HAVE BOTH DES_RISC1 AND DES_RISC2 DEFINED!!!!!
-#endif
-
-/* Unroll the inner loop, this sometimes helps, sometimes hinders.
- * Very mucy CPU dependant */
-#ifndef DES_UNROLL
-#undef DES_UNROLL
-#endif
-
-/* These default values were supplied by
- * Peter Gutman <pgut001@cs.auckland.ac.nz>
- * They are only used if nothing else has been defined */
-#if !defined(DES_PTR) && !defined(DES_RISC1) && !defined(DES_RISC2) && !defined(DES_UNROLL)
-/* Special defines which change the way the code is built depending on the
- CPU and OS. For SGI machines you can use _MIPS_SZLONG (32 or 64) to find
- even newer MIPS CPU's, but at the moment one size fits all for
- optimization options. Older Sparc's work better with only UNROLL, but
- there's no way to tell at compile time what it is you're running on */
-
-#if defined( sun ) /* Newer Sparc's */
-# define DES_PTR
-# define DES_RISC1
-# define DES_UNROLL
-#elif defined( __ultrix ) /* Older MIPS */
-# define DES_PTR
-# define DES_RISC2
-# define DES_UNROLL
-#elif defined( __osf1__ ) /* Alpha */
-# define DES_PTR
-# define DES_RISC2
-#elif defined ( _AIX ) /* RS6000 */
- /* Unknown */
-#elif defined( __hpux ) /* HP-PA */
- /* Unknown */
-#elif defined( __aux ) /* 68K */
- /* Unknown */
-#elif defined( __dgux ) /* 88K (but P6 in latest boxes) */
-# define DES_UNROLL
-#elif defined( __sgi ) /* Newer MIPS */
-# define DES_PTR
-# define DES_RISC2
-# define DES_UNROLL
-#elif defined(i386) || defined(__i386__) /* x86 boxes, should be gcc */
-# define DES_PTR
-# define DES_RISC1
-# define DES_UNROLL
-#endif /* Systems-specific speed defines */
-#endif
-
-#endif /* DES_DEFAULT_OPTIONS */
-#endif /* HEADER_DES_LOCL_H */