12 files changed, 58 insertions, 53 deletions
diff --git a/openssl/doc/apps/CA.pl.pod b/openssl/doc/apps/CA.pl.pod
index ed69952f3..d326101cd 100644
--- a/openssl/doc/apps/CA.pl.pod
+++ b/openssl/doc/apps/CA.pl.pod
@@ -39,13 +39,13 @@ prints a usage message.
 
 =item B<-newcert>
 
-creates a new self signed certificate. The private key and certificate are
-written to the file "newreq.pem".
+creates a new self signed certificate. The private key is written to the file
+"newkey.pem" and the request written to the file "newreq.pem".
 
 =item B<-newreq>
 
-creates a new certificate request. The private key and request are
-written to the file "newreq.pem".
+creates a new certificate request. The private key is written to the file
+"newkey.pem" and the request written to the file "newreq.pem".
 
 =item B<-newreq-nodes>
 
diff --git a/openssl/doc/apps/verify.pod b/openssl/doc/apps/verify.pod
index 336098f1e..da683004b 100644
--- a/openssl/doc/apps/verify.pod
+++ b/openssl/doc/apps/verify.pod
@@ -54,35 +54,37 @@ in PEM format concatenated together.
 =item B<-untrusted file>
 
 A file of untrusted certificates. The file should contain multiple certificates
+in PEM format concatenated together.
 
 =item B<-purpose purpose>
 
-the intended use for the certificate. Without this option no chain verification
-will be done. Currently accepted uses are B<sslclient>, B<sslserver>,
-B<nssslserver>, B<smimesign>, B<smimeencrypt>. See the B<VERIFY OPERATION>
-section for more information.
+The intended use for the certificate. If this option is not specified,
+B<verify> will not consider certificate purpose during chain verification.
+Currently accepted uses are B<sslclient>, B<sslserver>, B<nssslserver>,
+B<smimesign>, B<smimeencrypt>. See the B<VERIFY OPERATION> section for more
+information.
 
 =item B<-help>
 
-prints out a usage message.
+Print out a usage message.
 
 =item B<-verbose>
 
-print extra information about the operations being performed.
+Print extra information about the operations being performed.
 
 =item B<-issuer_checks>
 
-print out diagnostics relating to searches for the issuer certificate
-of the current certificate. This shows why each candidate issuer
-certificate was rejected. However the presence of rejection messages
-does not itself imply that anything is wrong: during the normal
-verify process several rejections may take place.
+Print out diagnostics relating to searches for the issuer certificate of the
+current certificate. This shows why each candidate issuer certificate was
+rejected. The presence of rejection messages does not itself imply that
+anything is wrong; during the normal verification process, several
+rejections may take place.
 
 =item B<-policy arg>
 
-Enable policy processing and add B<arg> to the user-initial-policy-set
-(see RFC3280 et al). The policy B<arg> can be an object name an OID in numeric
-form. This argument can appear more than once.
+Enable policy processing and add B<arg> to the user-initial-policy-set (see
+RFC5280). The policy B<arg> can be an object name an OID in numeric form.
+This argument can appear more than once.
 
 =item B<-policy_check>
 
@@ -90,41 +92,40 @@ Enables certificate policy processing.
 
 =item B<-explicit_policy>
 
-Set policy variable require-explicit-policy (see RFC3280 et al).
+Set policy variable require-explicit-policy (see RFC5280).
 
 =item B<-inhibit_any>
 
-Set policy variable inhibit-any-policy (see RFC3280 et al).
+Set policy variable inhibit-any-policy (see RFC5280).
 
 =item B<-inhibit_map>
 
-Set policy variable inhibit-policy-mapping (see RFC3280 et al).
+Set policy variable inhibit-policy-mapping (see RFC5280).
 
 =item B<-policy_print>
 
-Print out diagnostics, related to policy checking
+Print out diagnostics related to policy processing.
 
 =item B<-crl_check>
 
-Checks end entity certificate validity by attempting to lookup a valid CRL.
+Checks end entity certificate validity by attempting to look up a valid CRL.
 If a valid CRL cannot be found an error occurs. 
 
 =item B<-crl_check_all>
 
 Checks the validity of B<all> certificates in the chain by attempting
-to lookup valid CRLs.
+to look up valid CRLs.
 
 =item B<-ignore_critical>
 
 Normally if an unhandled critical extension is present which is not
-supported by OpenSSL the certificate is rejected (as required by
-RFC3280 et al). If this option is set critical extensions are
-ignored.
+supported by OpenSSL the certificate is rejected (as required by RFC5280).
+If this option is set critical extensions are ignored.
 
 =item B<-x509_strict>
 
-Disable workarounds for broken certificates which have to be disabled
-for strict X.509 compliance.
+For strict X.509 compliance, disable non-compliant workarounds for broken
+certificates.
 
 =item B<-extended_crl>
 
@@ -142,16 +143,15 @@ because it doesn't add any security.
 
 =item B<->
 
-marks the last option. All arguments following this are assumed to be
+Indicates the last option. All arguments following this are assumed to be
 certificate files. This is useful if the first certificate filename begins
 with a B<->.
 
 =item B<certificates>
 
-one or more certificates to verify. If no certificate filenames are included
-then an attempt is made to read a certificate from standard input. They should
-all be in PEM format.
-
+One or more certificates to verify. If no certificates are given, B<verify>
+will attempt to read a certificate from standard input. Certificates must be
+in PEM format.
 
 =back
 
diff --git a/openssl/doc/apps/x509.pod b/openssl/doc/apps/x509.pod
index 3002b0812..d2d9eb812 100644
--- a/openssl/doc/apps/x509.pod
+++ b/openssl/doc/apps/x509.pod
@@ -29,6 +29,7 @@ B<openssl> B<x509>
 [B<-purpose>]
 [B<-dates>]
 [B<-modulus>]
+[B<-pubkey>]
 [B<-fingerprint>]
 [B<-alias>]
 [B<-noout>]
@@ -135,6 +136,10 @@ section for more information.
 
 this option prevents output of the encoded version of the request.
 
+=item B<-pubkey>
+
+outputs the the certificate's SubjectPublicKeyInfo block in PEM format.
+
 =item B<-modulus>
 
 this option prints out the value of the modulus of the public key
diff --git a/openssl/doc/crypto/EVP_PKEY_CTX_ctrl.pod b/openssl/doc/crypto/EVP_PKEY_CTX_ctrl.pod
index f2f455990..13b91f1e6 100644
--- a/openssl/doc/crypto/EVP_PKEY_CTX_ctrl.pod
+++ b/openssl/doc/crypto/EVP_PKEY_CTX_ctrl.pod
@@ -117,7 +117,7 @@ L<EVP_PKEY_encrypt(3)|EVP_PKEY_encrypt(3)>,
 L<EVP_PKEY_decrypt(3)|EVP_PKEY_decrypt(3)>,
 L<EVP_PKEY_sign(3)|EVP_PKEY_sign(3)>,
 L<EVP_PKEY_verify(3)|EVP_PKEY_verify(3)>,
-L<EVP_PKEY_verifyrecover(3)|EVP_PKEY_verifyrecover(3)>,
+L<EVP_PKEY_verify_recover(3)|EVP_PKEY_verify_recover(3)>,
 L<EVP_PKEY_derive(3)|EVP_PKEY_derive(3)> 
 L<EVP_PKEY_keygen(3)|EVP_PKEY_keygen(3)> 
 
diff --git a/openssl/doc/crypto/EVP_PKEY_decrypt.pod b/openssl/doc/crypto/EVP_PKEY_decrypt.pod
index 42b2a8c44..847983237 100644
--- a/openssl/doc/crypto/EVP_PKEY_decrypt.pod
+++ b/openssl/doc/crypto/EVP_PKEY_decrypt.pod
@@ -83,7 +83,7 @@ L<EVP_PKEY_CTX_new(3)|EVP_PKEY_CTX_new(3)>,
 L<EVP_PKEY_encrypt(3)|EVP_PKEY_encrypt(3)>,
 L<EVP_PKEY_sign(3)|EVP_PKEY_sign(3)>,
 L<EVP_PKEY_verify(3)|EVP_PKEY_verify(3)>,
-L<EVP_PKEY_verifyrecover(3)|EVP_PKEY_verifyrecover(3)>,
+L<EVP_PKEY_verify_recover(3)|EVP_PKEY_verify_recover(3)>,
 L<EVP_PKEY_derive(3)|EVP_PKEY_derive(3)> 
 
 =head1 HISTORY
diff --git a/openssl/doc/crypto/EVP_PKEY_derive.pod b/openssl/doc/crypto/EVP_PKEY_derive.pod
index d9d6d76c7..27464be57 100644
--- a/openssl/doc/crypto/EVP_PKEY_derive.pod
+++ b/openssl/doc/crypto/EVP_PKEY_derive.pod
@@ -84,7 +84,7 @@ L<EVP_PKEY_encrypt(3)|EVP_PKEY_encrypt(3)>,
 L<EVP_PKEY_decrypt(3)|EVP_PKEY_decrypt(3)>,
 L<EVP_PKEY_sign(3)|EVP_PKEY_sign(3)>,
 L<EVP_PKEY_verify(3)|EVP_PKEY_verify(3)>,
-L<EVP_PKEY_verifyrecover(3)|EVP_PKEY_verifyrecover(3)>,
+L<EVP_PKEY_verify_recover(3)|EVP_PKEY_verify_recover(3)>,
 
 =head1 HISTORY
 
diff --git a/openssl/doc/crypto/EVP_PKEY_encrypt.pod b/openssl/doc/crypto/EVP_PKEY_encrypt.pod
index 91c9c5d0a..e495a8124 100644
--- a/openssl/doc/crypto/EVP_PKEY_encrypt.pod
+++ b/openssl/doc/crypto/EVP_PKEY_encrypt.pod
@@ -83,7 +83,7 @@ L<EVP_PKEY_CTX_new(3)|EVP_PKEY_CTX_new(3)>,
 L<EVP_PKEY_decrypt(3)|EVP_PKEY_decrypt(3)>,
 L<EVP_PKEY_sign(3)|EVP_PKEY_sign(3)>,
 L<EVP_PKEY_verify(3)|EVP_PKEY_verify(3)>,
-L<EVP_PKEY_verifyrecover(3)|EVP_PKEY_verifyrecover(3)>,
+L<EVP_PKEY_verify_recover(3)|EVP_PKEY_verify_recover(3)>,
 L<EVP_PKEY_derive(3)|EVP_PKEY_derive(3)> 
 
 =head1 HISTORY
diff --git a/openssl/doc/crypto/EVP_PKEY_get_default_digest.pod b/openssl/doc/crypto/EVP_PKEY_get_default_digest.pod
index 1a9c7954c..8ff597d44 100644
--- a/openssl/doc/crypto/EVP_PKEY_get_default_digest.pod
+++ b/openssl/doc/crypto/EVP_PKEY_get_default_digest.pod
@@ -32,7 +32,7 @@ public key algorithm.
 L<EVP_PKEY_CTX_new(3)|EVP_PKEY_CTX_new(3)>,
 L<EVP_PKEY_sign(3)|EVP_PKEY_sign(3)>,
 L<EVP_PKEY_verify(3)|EVP_PKEY_verify(3)>,
-L<EVP_PKEY_verifyrecover(3)|EVP_PKEY_verifyrecover(3)>,
+L<EVP_PKEY_verify_recover(3)|EVP_PKEY_verify_recover(3)>,
 
 =head1 HISTORY
 
diff --git a/openssl/doc/crypto/EVP_PKEY_keygen.pod b/openssl/doc/crypto/EVP_PKEY_keygen.pod
index 37c6fe950..fd431ace6 100644
--- a/openssl/doc/crypto/EVP_PKEY_keygen.pod
+++ b/openssl/doc/crypto/EVP_PKEY_keygen.pod
@@ -151,7 +151,7 @@ L<EVP_PKEY_encrypt(3)|EVP_PKEY_encrypt(3)>,
 L<EVP_PKEY_decrypt(3)|EVP_PKEY_decrypt(3)>,
 L<EVP_PKEY_sign(3)|EVP_PKEY_sign(3)>,
 L<EVP_PKEY_verify(3)|EVP_PKEY_verify(3)>,
-L<EVP_PKEY_verifyrecover(3)|EVP_PKEY_verifyrecover(3)>,
+L<EVP_PKEY_verify_recover(3)|EVP_PKEY_verify_recover(3)>,
 L<EVP_PKEY_derive(3)|EVP_PKEY_derive(3)> 
 
 =head1 HISTORY
diff --git a/openssl/doc/crypto/EVP_PKEY_sign.pod b/openssl/doc/crypto/EVP_PKEY_sign.pod
index 2fb52c348..a044f2c13 100644
--- a/openssl/doc/crypto/EVP_PKEY_sign.pod
+++ b/openssl/doc/crypto/EVP_PKEY_sign.pod
@@ -86,7 +86,7 @@ L<EVP_PKEY_CTX_new(3)|EVP_PKEY_CTX_new(3)>,
 L<EVP_PKEY_encrypt(3)|EVP_PKEY_encrypt(3)>,
 L<EVP_PKEY_decrypt(3)|EVP_PKEY_decrypt(3)>,
 L<EVP_PKEY_verify(3)|EVP_PKEY_verify(3)>,
-L<EVP_PKEY_verifyrecover(3)|EVP_PKEY_verifyrecover(3)>,
+L<EVP_PKEY_verify_recover(3)|EVP_PKEY_verify_recover(3)>,
 L<EVP_PKEY_derive(3)|EVP_PKEY_derive(3)> 
 
 =head1 HISTORY
diff --git a/openssl/doc/crypto/EVP_PKEY_verify.pod b/openssl/doc/crypto/EVP_PKEY_verify.pod
index f93e5fc6c..90612ba2f 100644
--- a/openssl/doc/crypto/EVP_PKEY_verify.pod
+++ b/openssl/doc/crypto/EVP_PKEY_verify.pod
@@ -81,7 +81,7 @@ L<EVP_PKEY_CTX_new(3)|EVP_PKEY_CTX_new(3)>,
 L<EVP_PKEY_encrypt(3)|EVP_PKEY_encrypt(3)>,
 L<EVP_PKEY_decrypt(3)|EVP_PKEY_decrypt(3)>,
 L<EVP_PKEY_sign(3)|EVP_PKEY_sign(3)>,
-L<EVP_PKEY_verifyrecover(3)|EVP_PKEY_verifyrecover(3)>,
+L<EVP_PKEY_verify_recover(3)|EVP_PKEY_verify_recover(3)>,
 L<EVP_PKEY_derive(3)|EVP_PKEY_derive(3)> 
 
 =head1 HISTORY
diff --git a/openssl/doc/crypto/EVP_PKEY_verifyrecover.pod b/openssl/doc/crypto/EVP_PKEY_verify_recover.pod
index f3605eb82..23a28a9c4 100644
--- a/openssl/doc/crypto/EVP_PKEY_verifyrecover.pod
+++ b/openssl/doc/crypto/EVP_PKEY_verify_recover.pod
@@ -2,23 +2,23 @@
 
 =head1 NAME
 
-EVP_PKEY_verifyrecover_init, EVP_PKEY_verifyrecover - recover signature using a public key algorithm
+EVP_PKEY_verify_recover_init, EVP_PKEY_verify_recover - recover signature using a public key algorithm
 
 =head1 SYNOPSIS
 
  #include <openssl/evp.h>
 
- int EVP_PKEY_verifyrecover_init(EVP_PKEY_CTX *ctx);
- int EVP_PKEY_verifyrecover(EVP_PKEY_CTX *ctx,
+ int EVP_PKEY_verify_recover_init(EVP_PKEY_CTX *ctx);
+ int EVP_PKEY_verify_recover(EVP_PKEY_CTX *ctx,
 			unsigned char *rout, size_t *routlen,
 			const unsigned char *sig, size_t siglen);
 
 =head1 DESCRIPTION
 
-The EVP_PKEY_verifyrecover_init() function initializes a public key algorithm
+The EVP_PKEY_verify_recover_init() function initializes a public key algorithm
 context using key B<pkey> for a verify recover operation.
 
-The EVP_PKEY_verifyrecover() function recovers signed data
+The EVP_PKEY_verify_recover() function recovers signed data
 using B<ctx>. The signature is specified using the B<sig> and
 B<siglen> parameters. If B<rout> is B<NULL> then the maximum size of the output
 buffer is written to the B<routlen> parameter. If B<rout> is not B<NULL> then
@@ -36,16 +36,16 @@ Sometimes however it is useful to obtain the data originally signed using a
 signing operation. Only certain public key algorithms can recover a signature
 in this way (for example RSA in PKCS padding mode).
 
-After the call to EVP_PKEY_verifyrecover_init() algorithm specific control
+After the call to EVP_PKEY_verify_recover_init() algorithm specific control
 operations can be performed to set any appropriate parameters for the
 operation.
 
-The function EVP_PKEY_verifyrecover() can be called more than once on the same
+The function EVP_PKEY_verify_recover() can be called more than once on the same
 context if several operations are performed using the same parameters.
 
 =head1 RETURN VALUES
 
-EVP_PKEY_verifyrecover_init() and EVP_PKEY_verifyrecover() return 1 for success
+EVP_PKEY_verify_recover_init() and EVP_PKEY_verify_recover() return 1 for success
 and 0 or a negative value for failure. In particular a return value of -2
 indicates the operation is not supported by the public key algorithm.
 
@@ -66,7 +66,7 @@ Recover digest originally signed using PKCS#1 and SHA256 digest:
  ctx = EVP_PKEY_CTX_new(verify_key);
  if (!ctx)
 	/* Error occurred */
- if (EVP_PKEY_verifyrecover_init(ctx) <= 0)
+ if (EVP_PKEY_verify_recover_init(ctx) <= 0)
 	/* Error */
  if (EVP_PKEY_CTX_set_rsa_padding(ctx, RSA_PKCS1_PADDING) <= 0)
 	/* Error */
@@ -74,7 +74,7 @@ Recover digest originally signed using PKCS#1 and SHA256 digest:
 	/* Error */
 
  /* Determine buffer length */
- if (EVP_PKEY_verifyrecover(ctx, NULL, &routlen, sig, siglen) <= 0)
+ if (EVP_PKEY_verify_recover(ctx, NULL, &routlen, sig, siglen) <= 0)
 	/* Error */
 
  rout = OPENSSL_malloc(routlen);
@@ -82,7 +82,7 @@ Recover digest originally signed using PKCS#1 and SHA256 digest:
  if (!rout)
 	/* malloc failure */
  
- if (EVP_PKEY_verifyrecover(ctx, rout, &routlen, sig, siglen) <= 0)
+ if (EVP_PKEY_verify_recover(ctx, rout, &routlen, sig, siglen) <= 0)
 	/* Error */
 
  /* Recovered data is routlen bytes written to buffer rout */