diff options
Diffstat (limited to 'openssl/engines/e_padlock.c')
| -rw-r--r-- | openssl/engines/e_padlock.c | 2466 |
1 files changed, 1233 insertions, 1233 deletions
diff --git a/openssl/engines/e_padlock.c b/openssl/engines/e_padlock.c index 7d0941980..dbeff3bb8 100644 --- a/openssl/engines/e_padlock.c +++ b/openssl/engines/e_padlock.c @@ -1,1233 +1,1233 @@ -/* - * Support for VIA PadLock Advanced Cryptography Engine (ACE) - * Written by Michal Ludvig <michal@logix.cz> - * http://www.logix.cz/michal - * - * Big thanks to Andy Polyakov for a help with optimization, - * assembler fixes, port to MS Windows and a lot of other - * valuable work on this engine! - */ - -/* ==================================================================== - * Copyright (c) 1999-2001 The OpenSSL Project. All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in - * the documentation and/or other materials provided with the - * distribution. - * - * 3. All advertising materials mentioning features or use of this - * software must display the following acknowledgment: - * "This product includes software developed by the OpenSSL Project - * for use in the OpenSSL Toolkit. (http://www.OpenSSL.org/)" - * - * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to - * endorse or promote products derived from this software without - * prior written permission. For written permission, please contact - * licensing@OpenSSL.org. - * - * 5. Products derived from this software may not be called "OpenSSL" - * nor may "OpenSSL" appear in their names without prior written - * permission of the OpenSSL Project. - * - * 6. Redistributions of any form whatsoever must retain the following - * acknowledgment: - * "This product includes software developed by the OpenSSL Project - * for use in the OpenSSL Toolkit (http://www.OpenSSL.org/)" - * - * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY - * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR - * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE OpenSSL PROJECT OR - * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, - * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT - * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; - * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, - * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) - * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED - * OF THE POSSIBILITY OF SUCH DAMAGE. - * ==================================================================== - * - * This product includes cryptographic software written by Eric Young - * (eay@cryptsoft.com). This product includes software written by Tim - * Hudson (tjh@cryptsoft.com). - * - */ - - -#include <stdio.h> -#include <string.h> - -#include <openssl/opensslconf.h> -#include <openssl/crypto.h> -#include <openssl/dso.h> -#include <openssl/engine.h> -#include <openssl/evp.h> -#ifndef OPENSSL_NO_AES -#include <openssl/aes.h> -#endif -#include <openssl/rand.h> -#include <openssl/err.h> - -#ifndef OPENSSL_NO_HW -#ifndef OPENSSL_NO_HW_PADLOCK - -/* Attempt to have a single source for both 0.9.7 and 0.9.8 :-) */ -#if (OPENSSL_VERSION_NUMBER >= 0x00908000L) -# ifndef OPENSSL_NO_DYNAMIC_ENGINE -# define DYNAMIC_ENGINE -# endif -#elif (OPENSSL_VERSION_NUMBER >= 0x00907000L) -# ifdef ENGINE_DYNAMIC_SUPPORT -# define DYNAMIC_ENGINE -# endif -#else -# error "Only OpenSSL >= 0.9.7 is supported" -#endif - -/* VIA PadLock AES is available *ONLY* on some x86 CPUs. - Not only that it doesn't exist elsewhere, but it - even can't be compiled on other platforms! - - In addition, because of the heavy use of inline assembler, - compiler choice is limited to GCC and Microsoft C. */ -#undef COMPILE_HW_PADLOCK -#if !defined(I386_ONLY) && !defined(OPENSSL_NO_INLINE_ASM) -# if (defined(__GNUC__) && (defined(__i386__) || defined(__i386))) || \ - (defined(_MSC_VER) && defined(_M_IX86)) -# define COMPILE_HW_PADLOCK -static ENGINE *ENGINE_padlock (void); -# endif -#endif - -#ifdef OPENSSL_NO_DYNAMIC_ENGINE - -void ENGINE_load_padlock (void) -{ -/* On non-x86 CPUs it just returns. */ -#ifdef COMPILE_HW_PADLOCK - ENGINE *toadd = ENGINE_padlock (); - if (!toadd) return; - ENGINE_add (toadd); - ENGINE_free (toadd); - ERR_clear_error (); -#endif -} - -#endif - -#ifdef COMPILE_HW_PADLOCK -/* We do these includes here to avoid header problems on platforms that - do not have the VIA padlock anyway... */ -#include <stdlib.h> -#ifdef _WIN32 -# include <malloc.h> -# ifndef alloca -# define alloca _alloca -# endif -#elif defined(__GNUC__) -# ifndef alloca -# define alloca(s) __builtin_alloca(s) -# endif -#endif - -/* Function for ENGINE detection and control */ -static int padlock_available(void); -static int padlock_init(ENGINE *e); - -/* RNG Stuff */ -static RAND_METHOD padlock_rand; - -/* Cipher Stuff */ -#ifndef OPENSSL_NO_AES -static int padlock_ciphers(ENGINE *e, const EVP_CIPHER **cipher, const int **nids, int nid); -#endif - -/* Engine names */ -static const char *padlock_id = "padlock"; -static char padlock_name[100]; - -/* Available features */ -static int padlock_use_ace = 0; /* Advanced Cryptography Engine */ -static int padlock_use_rng = 0; /* Random Number Generator */ -#ifndef OPENSSL_NO_AES -static int padlock_aes_align_required = 1; -#endif - -/* ===== Engine "management" functions ===== */ - -/* Prepare the ENGINE structure for registration */ -static int -padlock_bind_helper(ENGINE *e) -{ - /* Check available features */ - padlock_available(); - -#if 1 /* disable RNG for now, see commentary in vicinity of RNG code */ - padlock_use_rng=0; -#endif - - /* Generate a nice engine name with available features */ - BIO_snprintf(padlock_name, sizeof(padlock_name), - "VIA PadLock (%s, %s)", - padlock_use_rng ? "RNG" : "no-RNG", - padlock_use_ace ? "ACE" : "no-ACE"); - - /* Register everything or return with an error */ - if (!ENGINE_set_id(e, padlock_id) || - !ENGINE_set_name(e, padlock_name) || - - !ENGINE_set_init_function(e, padlock_init) || -#ifndef OPENSSL_NO_AES - (padlock_use_ace && !ENGINE_set_ciphers (e, padlock_ciphers)) || -#endif - (padlock_use_rng && !ENGINE_set_RAND (e, &padlock_rand))) { - return 0; - } - - /* Everything looks good */ - return 1; -} - -/* Constructor */ -static ENGINE * -ENGINE_padlock(void) -{ - ENGINE *eng = ENGINE_new(); - - if (!eng) { - return NULL; - } - - if (!padlock_bind_helper(eng)) { - ENGINE_free(eng); - return NULL; - } - - return eng; -} - -/* Check availability of the engine */ -static int -padlock_init(ENGINE *e) -{ - return (padlock_use_rng || padlock_use_ace); -} - -/* This stuff is needed if this ENGINE is being compiled into a self-contained - * shared-library. - */ -#ifdef DYNAMIC_ENGINE -static int -padlock_bind_fn(ENGINE *e, const char *id) -{ - if (id && (strcmp(id, padlock_id) != 0)) { - return 0; - } - - if (!padlock_bind_helper(e)) { - return 0; - } - - return 1; -} - -IMPLEMENT_DYNAMIC_CHECK_FN() -IMPLEMENT_DYNAMIC_BIND_FN (padlock_bind_fn) -#endif /* DYNAMIC_ENGINE */ - -/* ===== Here comes the "real" engine ===== */ - -#ifndef OPENSSL_NO_AES -/* Some AES-related constants */ -#define AES_BLOCK_SIZE 16 -#define AES_KEY_SIZE_128 16 -#define AES_KEY_SIZE_192 24 -#define AES_KEY_SIZE_256 32 - -/* Here we store the status information relevant to the - current context. */ -/* BIG FAT WARNING: - * Inline assembler in PADLOCK_XCRYPT_ASM() - * depends on the order of items in this structure. - * Don't blindly modify, reorder, etc! - */ -struct padlock_cipher_data -{ - unsigned char iv[AES_BLOCK_SIZE]; /* Initialization vector */ - union { unsigned int pad[4]; - struct { - int rounds:4; - int dgst:1; /* n/a in C3 */ - int align:1; /* n/a in C3 */ - int ciphr:1; /* n/a in C3 */ - unsigned int keygen:1; - int interm:1; - unsigned int encdec:1; - int ksize:2; - } b; - } cword; /* Control word */ - AES_KEY ks; /* Encryption key */ -}; - -/* - * Essentially this variable belongs in thread local storage. - * Having this variable global on the other hand can only cause - * few bogus key reloads [if any at all on single-CPU system], - * so we accept the penatly... - */ -static volatile struct padlock_cipher_data *padlock_saved_context; -#endif - -/* - * ======================================================= - * Inline assembler section(s). - * ======================================================= - * Order of arguments is chosen to facilitate Windows port - * using __fastcall calling convention. If you wish to add - * more routines, keep in mind that first __fastcall - * argument is passed in %ecx and second - in %edx. - * ======================================================= - */ -#if defined(__GNUC__) && __GNUC__>=2 -/* - * As for excessive "push %ebx"/"pop %ebx" found all over. - * When generating position-independent code GCC won't let - * us use "b" in assembler templates nor even respect "ebx" - * in "clobber description." Therefore the trouble... - */ - -/* Helper function - check if a CPUID instruction - is available on this CPU */ -static int -padlock_insn_cpuid_available(void) -{ - int result = -1; - - /* We're checking if the bit #21 of EFLAGS - can be toggled. If yes = CPUID is available. */ - asm volatile ( - "pushf\n" - "popl %%eax\n" - "xorl $0x200000, %%eax\n" - "movl %%eax, %%ecx\n" - "andl $0x200000, %%ecx\n" - "pushl %%eax\n" - "popf\n" - "pushf\n" - "popl %%eax\n" - "andl $0x200000, %%eax\n" - "xorl %%eax, %%ecx\n" - "movl %%ecx, %0\n" - : "=r" (result) : : "eax", "ecx"); - - return (result == 0); -} - -/* Load supported features of the CPU to see if - the PadLock is available. */ -static int -padlock_available(void) -{ - char vendor_string[16]; - unsigned int eax, edx; - - /* First check if the CPUID instruction is available at all... */ - if (! padlock_insn_cpuid_available()) - return 0; - - /* Are we running on the Centaur (VIA) CPU? */ - eax = 0x00000000; - vendor_string[12] = 0; - asm volatile ( - "pushl %%ebx\n" - "cpuid\n" - "movl %%ebx,(%%edi)\n" - "movl %%edx,4(%%edi)\n" - "movl %%ecx,8(%%edi)\n" - "popl %%ebx" - : "+a"(eax) : "D"(vendor_string) : "ecx", "edx"); - if (strcmp(vendor_string, "CentaurHauls") != 0) - return 0; - - /* Check for Centaur Extended Feature Flags presence */ - eax = 0xC0000000; - asm volatile ("pushl %%ebx; cpuid; popl %%ebx" - : "+a"(eax) : : "ecx", "edx"); - if (eax < 0xC0000001) - return 0; - - /* Read the Centaur Extended Feature Flags */ - eax = 0xC0000001; - asm volatile ("pushl %%ebx; cpuid; popl %%ebx" - : "+a"(eax), "=d"(edx) : : "ecx"); - - /* Fill up some flags */ - padlock_use_ace = ((edx & (0x3<<6)) == (0x3<<6)); - padlock_use_rng = ((edx & (0x3<<2)) == (0x3<<2)); - - return padlock_use_ace + padlock_use_rng; -} - -#ifndef OPENSSL_NO_AES -/* Our own htonl()/ntohl() */ -static inline void -padlock_bswapl(AES_KEY *ks) -{ - size_t i = sizeof(ks->rd_key)/sizeof(ks->rd_key[0]); - unsigned int *key = ks->rd_key; - - while (i--) { - asm volatile ("bswapl %0" : "+r"(*key)); - key++; - } -} -#endif - -/* Force key reload from memory to the CPU microcode. - Loading EFLAGS from the stack clears EFLAGS[30] - which does the trick. */ -static inline void -padlock_reload_key(void) -{ - asm volatile ("pushfl; popfl"); -} - -#ifndef OPENSSL_NO_AES -/* - * This is heuristic key context tracing. At first one - * believes that one should use atomic swap instructions, - * but it's not actually necessary. Point is that if - * padlock_saved_context was changed by another thread - * after we've read it and before we compare it with cdata, - * our key *shall* be reloaded upon thread context switch - * and we are therefore set in either case... - */ -static inline void -padlock_verify_context(struct padlock_cipher_data *cdata) -{ - asm volatile ( - "pushfl\n" -" btl $30,(%%esp)\n" -" jnc 1f\n" -" cmpl %2,%1\n" -" je 1f\n" -" popfl\n" -" subl $4,%%esp\n" -"1: addl $4,%%esp\n" -" movl %2,%0" - :"+m"(padlock_saved_context) - : "r"(padlock_saved_context), "r"(cdata) : "cc"); -} - -/* Template for padlock_xcrypt_* modes */ -/* BIG FAT WARNING: - * The offsets used with 'leal' instructions - * describe items of the 'padlock_cipher_data' - * structure. - */ -#define PADLOCK_XCRYPT_ASM(name,rep_xcrypt) \ -static inline void *name(size_t cnt, \ - struct padlock_cipher_data *cdata, \ - void *out, const void *inp) \ -{ void *iv; \ - asm volatile ( "pushl %%ebx\n" \ - " leal 16(%0),%%edx\n" \ - " leal 32(%0),%%ebx\n" \ - rep_xcrypt "\n" \ - " popl %%ebx" \ - : "=a"(iv), "=c"(cnt), "=D"(out), "=S"(inp) \ - : "0"(cdata), "1"(cnt), "2"(out), "3"(inp) \ - : "edx", "cc", "memory"); \ - return iv; \ -} - -/* Generate all functions with appropriate opcodes */ -PADLOCK_XCRYPT_ASM(padlock_xcrypt_ecb, ".byte 0xf3,0x0f,0xa7,0xc8") /* rep xcryptecb */ -PADLOCK_XCRYPT_ASM(padlock_xcrypt_cbc, ".byte 0xf3,0x0f,0xa7,0xd0") /* rep xcryptcbc */ -PADLOCK_XCRYPT_ASM(padlock_xcrypt_cfb, ".byte 0xf3,0x0f,0xa7,0xe0") /* rep xcryptcfb */ -PADLOCK_XCRYPT_ASM(padlock_xcrypt_ofb, ".byte 0xf3,0x0f,0xa7,0xe8") /* rep xcryptofb */ -#endif - -/* The RNG call itself */ -static inline unsigned int -padlock_xstore(void *addr, unsigned int edx_in) -{ - unsigned int eax_out; - - asm volatile (".byte 0x0f,0xa7,0xc0" /* xstore */ - : "=a"(eax_out),"=m"(*(unsigned *)addr) - : "D"(addr), "d" (edx_in) - ); - - return eax_out; -} - -/* Why not inline 'rep movsd'? I failed to find information on what - * value in Direction Flag one can expect and consequently have to - * apply "better-safe-than-sorry" approach and assume "undefined." - * I could explicitly clear it and restore the original value upon - * return from padlock_aes_cipher, but it's presumably too much - * trouble for too little gain... - * - * In case you wonder 'rep xcrypt*' instructions above are *not* - * affected by the Direction Flag and pointers advance toward - * larger addresses unconditionally. - */ -static inline unsigned char * -padlock_memcpy(void *dst,const void *src,size_t n) -{ - long *d=dst; - const long *s=src; - - n /= sizeof(*d); - do { *d++ = *s++; } while (--n); - - return dst; -} - -#elif defined(_MSC_VER) -/* - * Unlike GCC these are real functions. In order to minimize impact - * on performance we adhere to __fastcall calling convention in - * order to get two first arguments passed through %ecx and %edx. - * Which kind of suits very well, as instructions in question use - * both %ecx and %edx as input:-) - */ -#define REP_XCRYPT(code) \ - _asm _emit 0xf3 \ - _asm _emit 0x0f _asm _emit 0xa7 \ - _asm _emit code - -/* BIG FAT WARNING: - * The offsets used with 'lea' instructions - * describe items of the 'padlock_cipher_data' - * structure. - */ -#define PADLOCK_XCRYPT_ASM(name,code) \ -static void * __fastcall \ - name (size_t cnt, void *cdata, \ - void *outp, const void *inp) \ -{ _asm mov eax,edx \ - _asm lea edx,[eax+16] \ - _asm lea ebx,[eax+32] \ - _asm mov edi,outp \ - _asm mov esi,inp \ - REP_XCRYPT(code) \ -} - -PADLOCK_XCRYPT_ASM(padlock_xcrypt_ecb,0xc8) -PADLOCK_XCRYPT_ASM(padlock_xcrypt_cbc,0xd0) -PADLOCK_XCRYPT_ASM(padlock_xcrypt_cfb,0xe0) -PADLOCK_XCRYPT_ASM(padlock_xcrypt_ofb,0xe8) - -static int __fastcall -padlock_xstore(void *outp,unsigned int code) -{ _asm mov edi,ecx - _asm _emit 0x0f _asm _emit 0xa7 _asm _emit 0xc0 -} - -static void __fastcall -padlock_reload_key(void) -{ _asm pushfd _asm popfd } - -static void __fastcall -padlock_verify_context(void *cdata) -{ _asm { - pushfd - bt DWORD PTR[esp],30 - jnc skip - cmp ecx,padlock_saved_context - je skip - popfd - sub esp,4 - skip: add esp,4 - mov padlock_saved_context,ecx - } -} - -static int -padlock_available(void) -{ _asm { - pushfd - pop eax - mov ecx,eax - xor eax,1<<21 - push eax - popfd - pushfd - pop eax - xor eax,ecx - bt eax,21 - jnc noluck - mov eax,0 - cpuid - xor eax,eax - cmp ebx,'tneC' - jne noluck - cmp edx,'Hrua' - jne noluck - cmp ecx,'slua' - jne noluck - mov eax,0xC0000000 - cpuid - mov edx,eax - xor eax,eax - cmp edx,0xC0000001 - jb noluck - mov eax,0xC0000001 - cpuid - xor eax,eax - bt edx,6 - jnc skip_a - bt edx,7 - jnc skip_a - mov padlock_use_ace,1 - inc eax - skip_a: bt edx,2 - jnc skip_r - bt edx,3 - jnc skip_r - mov padlock_use_rng,1 - inc eax - skip_r: - noluck: - } -} - -static void __fastcall -padlock_bswapl(void *key) -{ _asm { - pushfd - cld - mov esi,ecx - mov edi,ecx - mov ecx,60 - up: lodsd - bswap eax - stosd - loop up - popfd - } -} - -/* MS actually specifies status of Direction Flag and compiler even - * manages to compile following as 'rep movsd' all by itself... - */ -#define padlock_memcpy(o,i,n) ((unsigned char *)memcpy((o),(i),(n)&~3U)) -#endif - -/* ===== AES encryption/decryption ===== */ -#ifndef OPENSSL_NO_AES - -#if defined(NID_aes_128_cfb128) && ! defined (NID_aes_128_cfb) -#define NID_aes_128_cfb NID_aes_128_cfb128 -#endif - -#if defined(NID_aes_128_ofb128) && ! defined (NID_aes_128_ofb) -#define NID_aes_128_ofb NID_aes_128_ofb128 -#endif - -#if defined(NID_aes_192_cfb128) && ! defined (NID_aes_192_cfb) -#define NID_aes_192_cfb NID_aes_192_cfb128 -#endif - -#if defined(NID_aes_192_ofb128) && ! defined (NID_aes_192_ofb) -#define NID_aes_192_ofb NID_aes_192_ofb128 -#endif - -#if defined(NID_aes_256_cfb128) && ! defined (NID_aes_256_cfb) -#define NID_aes_256_cfb NID_aes_256_cfb128 -#endif - -#if defined(NID_aes_256_ofb128) && ! defined (NID_aes_256_ofb) -#define NID_aes_256_ofb NID_aes_256_ofb128 -#endif - -/* List of supported ciphers. */ -static int padlock_cipher_nids[] = { - NID_aes_128_ecb, - NID_aes_128_cbc, - NID_aes_128_cfb, - NID_aes_128_ofb, - - NID_aes_192_ecb, - NID_aes_192_cbc, - NID_aes_192_cfb, - NID_aes_192_ofb, - - NID_aes_256_ecb, - NID_aes_256_cbc, - NID_aes_256_cfb, - NID_aes_256_ofb, -}; -static int padlock_cipher_nids_num = (sizeof(padlock_cipher_nids)/ - sizeof(padlock_cipher_nids[0])); - -/* Function prototypes ... */ -static int padlock_aes_init_key(EVP_CIPHER_CTX *ctx, const unsigned char *key, - const unsigned char *iv, int enc); -static int padlock_aes_cipher(EVP_CIPHER_CTX *ctx, unsigned char *out, - const unsigned char *in, size_t nbytes); - -#define NEAREST_ALIGNED(ptr) ( (unsigned char *)(ptr) + \ - ( (0x10 - ((size_t)(ptr) & 0x0F)) & 0x0F ) ) -#define ALIGNED_CIPHER_DATA(ctx) ((struct padlock_cipher_data *)\ - NEAREST_ALIGNED(ctx->cipher_data)) - -#define EVP_CIPHER_block_size_ECB AES_BLOCK_SIZE -#define EVP_CIPHER_block_size_CBC AES_BLOCK_SIZE -#define EVP_CIPHER_block_size_OFB 1 -#define EVP_CIPHER_block_size_CFB 1 - -/* Declaring so many ciphers by hand would be a pain. - Instead introduce a bit of preprocessor magic :-) */ -#define DECLARE_AES_EVP(ksize,lmode,umode) \ -static const EVP_CIPHER padlock_aes_##ksize##_##lmode = { \ - NID_aes_##ksize##_##lmode, \ - EVP_CIPHER_block_size_##umode, \ - AES_KEY_SIZE_##ksize, \ - AES_BLOCK_SIZE, \ - 0 | EVP_CIPH_##umode##_MODE, \ - padlock_aes_init_key, \ - padlock_aes_cipher, \ - NULL, \ - sizeof(struct padlock_cipher_data) + 16, \ - EVP_CIPHER_set_asn1_iv, \ - EVP_CIPHER_get_asn1_iv, \ - NULL, \ - NULL \ -} - -DECLARE_AES_EVP(128,ecb,ECB); -DECLARE_AES_EVP(128,cbc,CBC); -DECLARE_AES_EVP(128,cfb,CFB); -DECLARE_AES_EVP(128,ofb,OFB); - -DECLARE_AES_EVP(192,ecb,ECB); -DECLARE_AES_EVP(192,cbc,CBC); -DECLARE_AES_EVP(192,cfb,CFB); -DECLARE_AES_EVP(192,ofb,OFB); - -DECLARE_AES_EVP(256,ecb,ECB); -DECLARE_AES_EVP(256,cbc,CBC); -DECLARE_AES_EVP(256,cfb,CFB); -DECLARE_AES_EVP(256,ofb,OFB); - -static int -padlock_ciphers (ENGINE *e, const EVP_CIPHER **cipher, const int **nids, int nid) -{ - /* No specific cipher => return a list of supported nids ... */ - if (!cipher) { - *nids = padlock_cipher_nids; - return padlock_cipher_nids_num; - } - - /* ... or the requested "cipher" otherwise */ - switch (nid) { - case NID_aes_128_ecb: - *cipher = &padlock_aes_128_ecb; - break; - case NID_aes_128_cbc: - *cipher = &padlock_aes_128_cbc; - break; - case NID_aes_128_cfb: - *cipher = &padlock_aes_128_cfb; - break; - case NID_aes_128_ofb: - *cipher = &padlock_aes_128_ofb; - break; - - case NID_aes_192_ecb: - *cipher = &padlock_aes_192_ecb; - break; - case NID_aes_192_cbc: - *cipher = &padlock_aes_192_cbc; - break; - case NID_aes_192_cfb: - *cipher = &padlock_aes_192_cfb; - break; - case NID_aes_192_ofb: - *cipher = &padlock_aes_192_ofb; - break; - - case NID_aes_256_ecb: - *cipher = &padlock_aes_256_ecb; - break; - case NID_aes_256_cbc: - *cipher = &padlock_aes_256_cbc; - break; - case NID_aes_256_cfb: - *cipher = &padlock_aes_256_cfb; - break; - case NID_aes_256_ofb: - *cipher = &padlock_aes_256_ofb; - break; - - default: - /* Sorry, we don't support this NID */ - *cipher = NULL; - return 0; - } - - return 1; -} - -/* Prepare the encryption key for PadLock usage */ -static int -padlock_aes_init_key (EVP_CIPHER_CTX *ctx, const unsigned char *key, - const unsigned char *iv, int enc) -{ - struct padlock_cipher_data *cdata; - int key_len = EVP_CIPHER_CTX_key_length(ctx) * 8; - - if (key==NULL) return 0; /* ERROR */ - - cdata = ALIGNED_CIPHER_DATA(ctx); - memset(cdata, 0, sizeof(struct padlock_cipher_data)); - - /* Prepare Control word. */ - if (EVP_CIPHER_CTX_mode(ctx) == EVP_CIPH_OFB_MODE) - cdata->cword.b.encdec = 0; - else - cdata->cword.b.encdec = (ctx->encrypt == 0); - cdata->cword.b.rounds = 10 + (key_len - 128) / 32; - cdata->cword.b.ksize = (key_len - 128) / 64; - - switch(key_len) { - case 128: - /* PadLock can generate an extended key for - AES128 in hardware */ - memcpy(cdata->ks.rd_key, key, AES_KEY_SIZE_128); - cdata->cword.b.keygen = 0; - break; - - case 192: - case 256: - /* Generate an extended AES key in software. - Needed for AES192/AES256 */ - /* Well, the above applies to Stepping 8 CPUs - and is listed as hardware errata. They most - likely will fix it at some point and then - a check for stepping would be due here. */ - if (EVP_CIPHER_CTX_mode(ctx) == EVP_CIPH_CFB_MODE || - EVP_CIPHER_CTX_mode(ctx) == EVP_CIPH_OFB_MODE || - enc) - AES_set_encrypt_key(key, key_len, &cdata->ks); - else - AES_set_decrypt_key(key, key_len, &cdata->ks); -#ifndef AES_ASM - /* OpenSSL C functions use byte-swapped extended key. */ - padlock_bswapl(&cdata->ks); -#endif - cdata->cword.b.keygen = 1; - break; - - default: - /* ERROR */ - return 0; - } - - /* - * This is done to cover for cases when user reuses the - * context for new key. The catch is that if we don't do - * this, padlock_eas_cipher might proceed with old key... - */ - padlock_reload_key (); - - return 1; -} - -/* - * Simplified version of padlock_aes_cipher() used when - * 1) both input and output buffers are at aligned addresses. - * or when - * 2) running on a newer CPU that doesn't require aligned buffers. - */ -static int -padlock_aes_cipher_omnivorous(EVP_CIPHER_CTX *ctx, unsigned char *out_arg, - const unsigned char *in_arg, size_t nbytes) -{ - struct padlock_cipher_data *cdata; - void *iv; - - cdata = ALIGNED_CIPHER_DATA(ctx); - padlock_verify_context(cdata); - - switch (EVP_CIPHER_CTX_mode(ctx)) { - case EVP_CIPH_ECB_MODE: - padlock_xcrypt_ecb(nbytes/AES_BLOCK_SIZE, cdata, out_arg, in_arg); - break; - - case EVP_CIPH_CBC_MODE: - memcpy(cdata->iv, ctx->iv, AES_BLOCK_SIZE); - iv = padlock_xcrypt_cbc(nbytes/AES_BLOCK_SIZE, cdata, out_arg, in_arg); - memcpy(ctx->iv, iv, AES_BLOCK_SIZE); - break; - - case EVP_CIPH_CFB_MODE: - memcpy(cdata->iv, ctx->iv, AES_BLOCK_SIZE); - iv = padlock_xcrypt_cfb(nbytes/AES_BLOCK_SIZE, cdata, out_arg, in_arg); - memcpy(ctx->iv, iv, AES_BLOCK_SIZE); - break; - - case EVP_CIPH_OFB_MODE: - memcpy(cdata->iv, ctx->iv, AES_BLOCK_SIZE); - padlock_xcrypt_ofb(nbytes/AES_BLOCK_SIZE, cdata, out_arg, in_arg); - memcpy(ctx->iv, cdata->iv, AES_BLOCK_SIZE); - break; - - default: - return 0; - } - - memset(cdata->iv, 0, AES_BLOCK_SIZE); - - return 1; -} - -#ifndef PADLOCK_CHUNK -# define PADLOCK_CHUNK 512 /* Must be a power of 2 larger than 16 */ -#endif -#if PADLOCK_CHUNK<16 || PADLOCK_CHUNK&(PADLOCK_CHUNK-1) -# error "insane PADLOCK_CHUNK..." -#endif - -/* Re-align the arguments to 16-Bytes boundaries and run the - encryption function itself. This function is not AES-specific. */ -static int -padlock_aes_cipher(EVP_CIPHER_CTX *ctx, unsigned char *out_arg, - const unsigned char *in_arg, size_t nbytes) -{ - struct padlock_cipher_data *cdata; - const void *inp; - unsigned char *out; - void *iv; - int inp_misaligned, out_misaligned, realign_in_loop; - size_t chunk, allocated=0; - - /* ctx->num is maintained in byte-oriented modes, - such as CFB and OFB... */ - if ((chunk = ctx->num)) { /* borrow chunk variable */ - unsigned char *ivp=ctx->iv; - - switch (EVP_CIPHER_CTX_mode(ctx)) { - case EVP_CIPH_CFB_MODE: - if (chunk >= AES_BLOCK_SIZE) - return 0; /* bogus value */ - - if (ctx->encrypt) - while (chunk<AES_BLOCK_SIZE && nbytes!=0) { - ivp[chunk] = *(out_arg++) = *(in_arg++) ^ ivp[chunk]; - chunk++, nbytes--; - } - else while (chunk<AES_BLOCK_SIZE && nbytes!=0) { - unsigned char c = *(in_arg++); - *(out_arg++) = c ^ ivp[chunk]; - ivp[chunk++] = c, nbytes--; - } - - ctx->num = chunk%AES_BLOCK_SIZE; - break; - case EVP_CIPH_OFB_MODE: - if (chunk >= AES_BLOCK_SIZE) - return 0; /* bogus value */ - - while (chunk<AES_BLOCK_SIZE && nbytes!=0) { - *(out_arg++) = *(in_arg++) ^ ivp[chunk]; - chunk++, nbytes--; - } - - ctx->num = chunk%AES_BLOCK_SIZE; - break; - } - } - - if (nbytes == 0) - return 1; -#if 0 - if (nbytes % AES_BLOCK_SIZE) - return 0; /* are we expected to do tail processing? */ -#else - /* nbytes is always multiple of AES_BLOCK_SIZE in ECB and CBC - modes and arbitrary value in byte-oriented modes, such as - CFB and OFB... */ -#endif - - /* VIA promises CPUs that won't require alignment in the future. - For now padlock_aes_align_required is initialized to 1 and - the condition is never met... */ - /* C7 core is capable to manage unaligned input in non-ECB[!] - mode, but performance penalties appear to be approximately - same as for software alignment below or ~3x. They promise to - improve it in the future, but for now we can just as well - pretend that it can only handle aligned input... */ - if (!padlock_aes_align_required && (nbytes%AES_BLOCK_SIZE)==0) - return padlock_aes_cipher_omnivorous(ctx, out_arg, in_arg, nbytes); - - inp_misaligned = (((size_t)in_arg) & 0x0F); - out_misaligned = (((size_t)out_arg) & 0x0F); - - /* Note that even if output is aligned and input not, - * I still prefer to loop instead of copy the whole - * input and then encrypt in one stroke. This is done - * in order to improve L1 cache utilization... */ - realign_in_loop = out_misaligned|inp_misaligned; - - if (!realign_in_loop && (nbytes%AES_BLOCK_SIZE)==0) - return padlock_aes_cipher_omnivorous(ctx, out_arg, in_arg, nbytes); - - /* this takes one "if" out of the loops */ - chunk = nbytes; - chunk %= PADLOCK_CHUNK; - if (chunk==0) chunk = PADLOCK_CHUNK; - - if (out_misaligned) { - /* optmize for small input */ - allocated = (chunk<nbytes?PADLOCK_CHUNK:nbytes); - out = alloca(0x10 + allocated); - out = NEAREST_ALIGNED(out); - } - else - out = out_arg; - - cdata = ALIGNED_CIPHER_DATA(ctx); - padlock_verify_context(cdata); - - switch (EVP_CIPHER_CTX_mode(ctx)) { - case EVP_CIPH_ECB_MODE: - do { - if (inp_misaligned) - inp = padlock_memcpy(out, in_arg, chunk); - else - inp = in_arg; - in_arg += chunk; - - padlock_xcrypt_ecb(chunk/AES_BLOCK_SIZE, cdata, out, inp); - - if (out_misaligned) - out_arg = padlock_memcpy(out_arg, out, chunk) + chunk; - else - out = out_arg+=chunk; - - nbytes -= chunk; - chunk = PADLOCK_CHUNK; - } while (nbytes); - break; - - case EVP_CIPH_CBC_MODE: - memcpy(cdata->iv, ctx->iv, AES_BLOCK_SIZE); - goto cbc_shortcut; - do { - if (iv != cdata->iv) - memcpy(cdata->iv, iv, AES_BLOCK_SIZE); - chunk = PADLOCK_CHUNK; - cbc_shortcut: /* optimize for small input */ - if (inp_misaligned) - inp = padlock_memcpy(out, in_arg, chunk); - else - inp = in_arg; - in_arg += chunk; - - iv = padlock_xcrypt_cbc(chunk/AES_BLOCK_SIZE, cdata, out, inp); - - if (out_misaligned) - out_arg = padlock_memcpy(out_arg, out, chunk) + chunk; - else - out = out_arg+=chunk; - - } while (nbytes -= chunk); - memcpy(ctx->iv, iv, AES_BLOCK_SIZE); - break; - - case EVP_CIPH_CFB_MODE: - memcpy (iv = cdata->iv, ctx->iv, AES_BLOCK_SIZE); - chunk &= ~(AES_BLOCK_SIZE-1); - if (chunk) goto cfb_shortcut; - else goto cfb_skiploop; - do { - if (iv != cdata->iv) - memcpy(cdata->iv, iv, AES_BLOCK_SIZE); - chunk = PADLOCK_CHUNK; - cfb_shortcut: /* optimize for small input */ - if (inp_misaligned) - inp = padlock_memcpy(out, in_arg, chunk); - else - inp = in_arg; - in_arg += chunk; - - iv = padlock_xcrypt_cfb(chunk/AES_BLOCK_SIZE, cdata, out, inp); - - if (out_misaligned) - out_arg = padlock_memcpy(out_arg, out, chunk) + chunk; - else - out = out_arg+=chunk; - - nbytes -= chunk; - } while (nbytes >= AES_BLOCK_SIZE); - - cfb_skiploop: - if (nbytes) { - unsigned char *ivp = cdata->iv; - - if (iv != ivp) { - memcpy(ivp, iv, AES_BLOCK_SIZE); - iv = ivp; - } - ctx->num = nbytes; - if (cdata->cword.b.encdec) { - cdata->cword.b.encdec=0; - padlock_reload_key(); - padlock_xcrypt_ecb(1,cdata,ivp,ivp); - cdata->cword.b.encdec=1; - padlock_reload_key(); - while(nbytes) { - unsigned char c = *(in_arg++); - *(out_arg++) = c ^ *ivp; - *(ivp++) = c, nbytes--; - } - } - else { padlock_reload_key(); - padlock_xcrypt_ecb(1,cdata,ivp,ivp); - padlock_reload_key(); - while (nbytes) { - *ivp = *(out_arg++) = *(in_arg++) ^ *ivp; - ivp++, nbytes--; - } - } - } - - memcpy(ctx->iv, iv, AES_BLOCK_SIZE); - break; - - case EVP_CIPH_OFB_MODE: - memcpy(cdata->iv, ctx->iv, AES_BLOCK_SIZE); - chunk &= ~(AES_BLOCK_SIZE-1); - if (chunk) do { - if (inp_misaligned) - inp = padlock_memcpy(out, in_arg, chunk); - else - inp = in_arg; - in_arg += chunk; - - padlock_xcrypt_ofb(chunk/AES_BLOCK_SIZE, cdata, out, inp); - - if (out_misaligned) - out_arg = padlock_memcpy(out_arg, out, chunk) + chunk; - else - out = out_arg+=chunk; - - nbytes -= chunk; - chunk = PADLOCK_CHUNK; - } while (nbytes >= AES_BLOCK_SIZE); - - if (nbytes) { - unsigned char *ivp = cdata->iv; - - ctx->num = nbytes; - padlock_reload_key(); /* empirically found */ - padlock_xcrypt_ecb(1,cdata,ivp,ivp); - padlock_reload_key(); /* empirically found */ - while (nbytes) { - *(out_arg++) = *(in_arg++) ^ *ivp; - ivp++, nbytes--; - } - } - - memcpy(ctx->iv, cdata->iv, AES_BLOCK_SIZE); - break; - - default: - return 0; - } - - /* Clean the realign buffer if it was used */ - if (out_misaligned) { - volatile unsigned long *p=(void *)out; - size_t n = allocated/sizeof(*p); - while (n--) *p++=0; - } - - memset(cdata->iv, 0, AES_BLOCK_SIZE); - - return 1; -} - -#endif /* OPENSSL_NO_AES */ - -/* ===== Random Number Generator ===== */ -/* - * This code is not engaged. The reason is that it does not comply - * with recommendations for VIA RNG usage for secure applications - * (posted at http://www.via.com.tw/en/viac3/c3.jsp) nor does it - * provide meaningful error control... - */ -/* Wrapper that provides an interface between the API and - the raw PadLock RNG */ -static int -padlock_rand_bytes(unsigned char *output, int count) -{ - unsigned int eax, buf; - - while (count >= 8) { - eax = padlock_xstore(output, 0); - if (!(eax&(1<<6))) return 0; /* RNG disabled */ - /* this ---vv--- covers DC bias, Raw Bits and String Filter */ - if (eax&(0x1F<<10)) return 0; - if ((eax&0x1F)==0) continue; /* no data, retry... */ - if ((eax&0x1F)!=8) return 0; /* fatal failure... */ - output += 8; - count -= 8; - } - while (count > 0) { - eax = padlock_xstore(&buf, 3); - if (!(eax&(1<<6))) return 0; /* RNG disabled */ - /* this ---vv--- covers DC bias, Raw Bits and String Filter */ - if (eax&(0x1F<<10)) return 0; - if ((eax&0x1F)==0) continue; /* no data, retry... */ - if ((eax&0x1F)!=1) return 0; /* fatal failure... */ - *output++ = (unsigned char)buf; - count--; - } - *(volatile unsigned int *)&buf=0; - - return 1; -} - -/* Dummy but necessary function */ -static int -padlock_rand_status(void) -{ - return 1; -} - -/* Prepare structure for registration */ -static RAND_METHOD padlock_rand = { - NULL, /* seed */ - padlock_rand_bytes, /* bytes */ - NULL, /* cleanup */ - NULL, /* add */ - padlock_rand_bytes, /* pseudorand */ - padlock_rand_status, /* rand status */ -}; - -#else /* !COMPILE_HW_PADLOCK */ -#ifndef OPENSSL_NO_DYNAMIC_ENGINE -OPENSSL_EXPORT -int bind_engine(ENGINE *e, const char *id, const dynamic_fns *fns); -OPENSSL_EXPORT -int bind_engine(ENGINE *e, const char *id, const dynamic_fns *fns) { return 0; } -IMPLEMENT_DYNAMIC_CHECK_FN() -#endif -#endif /* COMPILE_HW_PADLOCK */ - -#endif /* !OPENSSL_NO_HW_PADLOCK */ -#endif /* !OPENSSL_NO_HW */ +/*
+ * Support for VIA PadLock Advanced Cryptography Engine (ACE)
+ * Written by Michal Ludvig <michal@logix.cz>
+ * http://www.logix.cz/michal
+ *
+ * Big thanks to Andy Polyakov for a help with optimization,
+ * assembler fixes, port to MS Windows and a lot of other
+ * valuable work on this engine!
+ */
+
+/* ====================================================================
+ * Copyright (c) 1999-2001 The OpenSSL Project. All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ *
+ * 3. All advertising materials mentioning features or use of this
+ * software must display the following acknowledgment:
+ * "This product includes software developed by the OpenSSL Project
+ * for use in the OpenSSL Toolkit. (http://www.OpenSSL.org/)"
+ *
+ * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to
+ * endorse or promote products derived from this software without
+ * prior written permission. For written permission, please contact
+ * licensing@OpenSSL.org.
+ *
+ * 5. Products derived from this software may not be called "OpenSSL"
+ * nor may "OpenSSL" appear in their names without prior written
+ * permission of the OpenSSL Project.
+ *
+ * 6. Redistributions of any form whatsoever must retain the following
+ * acknowledgment:
+ * "This product includes software developed by the OpenSSL Project
+ * for use in the OpenSSL Toolkit (http://www.OpenSSL.org/)"
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY
+ * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
+ * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE OpenSSL PROJECT OR
+ * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
+ * OF THE POSSIBILITY OF SUCH DAMAGE.
+ * ====================================================================
+ *
+ * This product includes cryptographic software written by Eric Young
+ * (eay@cryptsoft.com). This product includes software written by Tim
+ * Hudson (tjh@cryptsoft.com).
+ *
+ */
+
+
+#include <stdio.h>
+#include <string.h>
+
+#include <openssl/opensslconf.h>
+#include <openssl/crypto.h>
+#include <openssl/dso.h>
+#include <openssl/engine.h>
+#include <openssl/evp.h>
+#ifndef OPENSSL_NO_AES
+#include <openssl/aes.h>
+#endif
+#include <openssl/rand.h>
+#include <openssl/err.h>
+
+#ifndef OPENSSL_NO_HW
+#ifndef OPENSSL_NO_HW_PADLOCK
+
+/* Attempt to have a single source for both 0.9.7 and 0.9.8 :-) */
+#if (OPENSSL_VERSION_NUMBER >= 0x00908000L)
+# ifndef OPENSSL_NO_DYNAMIC_ENGINE
+# define DYNAMIC_ENGINE
+# endif
+#elif (OPENSSL_VERSION_NUMBER >= 0x00907000L)
+# ifdef ENGINE_DYNAMIC_SUPPORT
+# define DYNAMIC_ENGINE
+# endif
+#else
+# error "Only OpenSSL >= 0.9.7 is supported"
+#endif
+
+/* VIA PadLock AES is available *ONLY* on some x86 CPUs.
+ Not only that it doesn't exist elsewhere, but it
+ even can't be compiled on other platforms!
+
+ In addition, because of the heavy use of inline assembler,
+ compiler choice is limited to GCC and Microsoft C. */
+#undef COMPILE_HW_PADLOCK
+#if !defined(I386_ONLY) && !defined(OPENSSL_NO_INLINE_ASM)
+# if (defined(__GNUC__) && (defined(__i386__) || defined(__i386))) || \
+ (defined(_MSC_VER) && defined(_M_IX86))
+# define COMPILE_HW_PADLOCK
+static ENGINE *ENGINE_padlock (void);
+# endif
+#endif
+
+#ifdef OPENSSL_NO_DYNAMIC_ENGINE
+
+void ENGINE_load_padlock (void)
+{
+/* On non-x86 CPUs it just returns. */
+#ifdef COMPILE_HW_PADLOCK
+ ENGINE *toadd = ENGINE_padlock ();
+ if (!toadd) return;
+ ENGINE_add (toadd);
+ ENGINE_free (toadd);
+ ERR_clear_error ();
+#endif
+}
+
+#endif
+
+#ifdef COMPILE_HW_PADLOCK
+/* We do these includes here to avoid header problems on platforms that
+ do not have the VIA padlock anyway... */
+#include <stdlib.h>
+#ifdef _WIN32
+# include <malloc.h>
+# ifndef alloca
+# define alloca _alloca
+# endif
+#elif defined(__GNUC__)
+# ifndef alloca
+# define alloca(s) __builtin_alloca(s)
+# endif
+#endif
+
+/* Function for ENGINE detection and control */
+static int padlock_available(void);
+static int padlock_init(ENGINE *e);
+
+/* RNG Stuff */
+static RAND_METHOD padlock_rand;
+
+/* Cipher Stuff */
+#ifndef OPENSSL_NO_AES
+static int padlock_ciphers(ENGINE *e, const EVP_CIPHER **cipher, const int **nids, int nid);
+#endif
+
+/* Engine names */
+static const char *padlock_id = "padlock";
+static char padlock_name[100];
+
+/* Available features */
+static int padlock_use_ace = 0; /* Advanced Cryptography Engine */
+static int padlock_use_rng = 0; /* Random Number Generator */
+#ifndef OPENSSL_NO_AES
+static int padlock_aes_align_required = 1;
+#endif
+
+/* ===== Engine "management" functions ===== */
+
+/* Prepare the ENGINE structure for registration */
+static int
+padlock_bind_helper(ENGINE *e)
+{
+ /* Check available features */
+ padlock_available();
+
+#if 1 /* disable RNG for now, see commentary in vicinity of RNG code */
+ padlock_use_rng=0;
+#endif
+
+ /* Generate a nice engine name with available features */
+ BIO_snprintf(padlock_name, sizeof(padlock_name),
+ "VIA PadLock (%s, %s)",
+ padlock_use_rng ? "RNG" : "no-RNG",
+ padlock_use_ace ? "ACE" : "no-ACE");
+
+ /* Register everything or return with an error */
+ if (!ENGINE_set_id(e, padlock_id) ||
+ !ENGINE_set_name(e, padlock_name) ||
+
+ !ENGINE_set_init_function(e, padlock_init) ||
+#ifndef OPENSSL_NO_AES
+ (padlock_use_ace && !ENGINE_set_ciphers (e, padlock_ciphers)) ||
+#endif
+ (padlock_use_rng && !ENGINE_set_RAND (e, &padlock_rand))) {
+ return 0;
+ }
+
+ /* Everything looks good */
+ return 1;
+}
+
+/* Constructor */
+static ENGINE *
+ENGINE_padlock(void)
+{
+ ENGINE *eng = ENGINE_new();
+
+ if (!eng) {
+ return NULL;
+ }
+
+ if (!padlock_bind_helper(eng)) {
+ ENGINE_free(eng);
+ return NULL;
+ }
+
+ return eng;
+}
+
+/* Check availability of the engine */
+static int
+padlock_init(ENGINE *e)
+{
+ return (padlock_use_rng || padlock_use_ace);
+}
+
+/* This stuff is needed if this ENGINE is being compiled into a self-contained
+ * shared-library.
+ */
+#ifdef DYNAMIC_ENGINE
+static int
+padlock_bind_fn(ENGINE *e, const char *id)
+{
+ if (id && (strcmp(id, padlock_id) != 0)) {
+ return 0;
+ }
+
+ if (!padlock_bind_helper(e)) {
+ return 0;
+ }
+
+ return 1;
+}
+
+IMPLEMENT_DYNAMIC_CHECK_FN()
+IMPLEMENT_DYNAMIC_BIND_FN (padlock_bind_fn)
+#endif /* DYNAMIC_ENGINE */
+
+/* ===== Here comes the "real" engine ===== */
+
+#ifndef OPENSSL_NO_AES
+/* Some AES-related constants */
+#define AES_BLOCK_SIZE 16
+#define AES_KEY_SIZE_128 16
+#define AES_KEY_SIZE_192 24
+#define AES_KEY_SIZE_256 32
+
+/* Here we store the status information relevant to the
+ current context. */
+/* BIG FAT WARNING:
+ * Inline assembler in PADLOCK_XCRYPT_ASM()
+ * depends on the order of items in this structure.
+ * Don't blindly modify, reorder, etc!
+ */
+struct padlock_cipher_data
+{
+ unsigned char iv[AES_BLOCK_SIZE]; /* Initialization vector */
+ union { unsigned int pad[4];
+ struct {
+ int rounds:4;
+ int dgst:1; /* n/a in C3 */
+ int align:1; /* n/a in C3 */
+ int ciphr:1; /* n/a in C3 */
+ unsigned int keygen:1;
+ int interm:1;
+ unsigned int encdec:1;
+ int ksize:2;
+ } b;
+ } cword; /* Control word */
+ AES_KEY ks; /* Encryption key */
+};
+
+/*
+ * Essentially this variable belongs in thread local storage.
+ * Having this variable global on the other hand can only cause
+ * few bogus key reloads [if any at all on single-CPU system],
+ * so we accept the penatly...
+ */
+static volatile struct padlock_cipher_data *padlock_saved_context;
+#endif
+
+/*
+ * =======================================================
+ * Inline assembler section(s).
+ * =======================================================
+ * Order of arguments is chosen to facilitate Windows port
+ * using __fastcall calling convention. If you wish to add
+ * more routines, keep in mind that first __fastcall
+ * argument is passed in %ecx and second - in %edx.
+ * =======================================================
+ */
+#if defined(__GNUC__) && __GNUC__>=2
+/*
+ * As for excessive "push %ebx"/"pop %ebx" found all over.
+ * When generating position-independent code GCC won't let
+ * us use "b" in assembler templates nor even respect "ebx"
+ * in "clobber description." Therefore the trouble...
+ */
+
+/* Helper function - check if a CPUID instruction
+ is available on this CPU */
+static int
+padlock_insn_cpuid_available(void)
+{
+ int result = -1;
+
+ /* We're checking if the bit #21 of EFLAGS
+ can be toggled. If yes = CPUID is available. */
+ asm volatile (
+ "pushf\n"
+ "popl %%eax\n"
+ "xorl $0x200000, %%eax\n"
+ "movl %%eax, %%ecx\n"
+ "andl $0x200000, %%ecx\n"
+ "pushl %%eax\n"
+ "popf\n"
+ "pushf\n"
+ "popl %%eax\n"
+ "andl $0x200000, %%eax\n"
+ "xorl %%eax, %%ecx\n"
+ "movl %%ecx, %0\n"
+ : "=r" (result) : : "eax", "ecx");
+
+ return (result == 0);
+}
+
+/* Load supported features of the CPU to see if
+ the PadLock is available. */
+static int
+padlock_available(void)
+{
+ char vendor_string[16];
+ unsigned int eax, edx;
+
+ /* First check if the CPUID instruction is available at all... */
+ if (! padlock_insn_cpuid_available())
+ return 0;
+
+ /* Are we running on the Centaur (VIA) CPU? */
+ eax = 0x00000000;
+ vendor_string[12] = 0;
+ asm volatile (
+ "pushl %%ebx\n"
+ "cpuid\n"
+ "movl %%ebx,(%%edi)\n"
+ "movl %%edx,4(%%edi)\n"
+ "movl %%ecx,8(%%edi)\n"
+ "popl %%ebx"
+ : "+a"(eax) : "D"(vendor_string) : "ecx", "edx");
+ if (strcmp(vendor_string, "CentaurHauls") != 0)
+ return 0;
+
+ /* Check for Centaur Extended Feature Flags presence */
+ eax = 0xC0000000;
+ asm volatile ("pushl %%ebx; cpuid; popl %%ebx"
+ : "+a"(eax) : : "ecx", "edx");
+ if (eax < 0xC0000001)
+ return 0;
+
+ /* Read the Centaur Extended Feature Flags */
+ eax = 0xC0000001;
+ asm volatile ("pushl %%ebx; cpuid; popl %%ebx"
+ : "+a"(eax), "=d"(edx) : : "ecx");
+
+ /* Fill up some flags */
+ padlock_use_ace = ((edx & (0x3<<6)) == (0x3<<6));
+ padlock_use_rng = ((edx & (0x3<<2)) == (0x3<<2));
+
+ return padlock_use_ace + padlock_use_rng;
+}
+
+#ifndef OPENSSL_NO_AES
+/* Our own htonl()/ntohl() */
+static inline void
+padlock_bswapl(AES_KEY *ks)
+{
+ size_t i = sizeof(ks->rd_key)/sizeof(ks->rd_key[0]);
+ unsigned int *key = ks->rd_key;
+
+ while (i--) {
+ asm volatile ("bswapl %0" : "+r"(*key));
+ key++;
+ }
+}
+#endif
+
+/* Force key reload from memory to the CPU microcode.
+ Loading EFLAGS from the stack clears EFLAGS[30]
+ which does the trick. */
+static inline void
+padlock_reload_key(void)
+{
+ asm volatile ("pushfl; popfl");
+}
+
+#ifndef OPENSSL_NO_AES
+/*
+ * This is heuristic key context tracing. At first one
+ * believes that one should use atomic swap instructions,
+ * but it's not actually necessary. Point is that if
+ * padlock_saved_context was changed by another thread
+ * after we've read it and before we compare it with cdata,
+ * our key *shall* be reloaded upon thread context switch
+ * and we are therefore set in either case...
+ */
+static inline void
+padlock_verify_context(struct padlock_cipher_data *cdata)
+{
+ asm volatile (
+ "pushfl\n"
+" btl $30,(%%esp)\n"
+" jnc 1f\n"
+" cmpl %2,%1\n"
+" je 1f\n"
+" popfl\n"
+" subl $4,%%esp\n"
+"1: addl $4,%%esp\n"
+" movl %2,%0"
+ :"+m"(padlock_saved_context)
+ : "r"(padlock_saved_context), "r"(cdata) : "cc");
+}
+
+/* Template for padlock_xcrypt_* modes */
+/* BIG FAT WARNING:
+ * The offsets used with 'leal' instructions
+ * describe items of the 'padlock_cipher_data'
+ * structure.
+ */
+#define PADLOCK_XCRYPT_ASM(name,rep_xcrypt) \
+static inline void *name(size_t cnt, \
+ struct padlock_cipher_data *cdata, \
+ void *out, const void *inp) \
+{ void *iv; \
+ asm volatile ( "pushl %%ebx\n" \
+ " leal 16(%0),%%edx\n" \
+ " leal 32(%0),%%ebx\n" \
+ rep_xcrypt "\n" \
+ " popl %%ebx" \
+ : "=a"(iv), "=c"(cnt), "=D"(out), "=S"(inp) \
+ : "0"(cdata), "1"(cnt), "2"(out), "3"(inp) \
+ : "edx", "cc", "memory"); \
+ return iv; \
+}
+
+/* Generate all functions with appropriate opcodes */
+PADLOCK_XCRYPT_ASM(padlock_xcrypt_ecb, ".byte 0xf3,0x0f,0xa7,0xc8") /* rep xcryptecb */
+PADLOCK_XCRYPT_ASM(padlock_xcrypt_cbc, ".byte 0xf3,0x0f,0xa7,0xd0") /* rep xcryptcbc */
+PADLOCK_XCRYPT_ASM(padlock_xcrypt_cfb, ".byte 0xf3,0x0f,0xa7,0xe0") /* rep xcryptcfb */
+PADLOCK_XCRYPT_ASM(padlock_xcrypt_ofb, ".byte 0xf3,0x0f,0xa7,0xe8") /* rep xcryptofb */
+#endif
+
+/* The RNG call itself */
+static inline unsigned int
+padlock_xstore(void *addr, unsigned int edx_in)
+{
+ unsigned int eax_out;
+
+ asm volatile (".byte 0x0f,0xa7,0xc0" /* xstore */
+ : "=a"(eax_out),"=m"(*(unsigned *)addr)
+ : "D"(addr), "d" (edx_in)
+ );
+
+ return eax_out;
+}
+
+/* Why not inline 'rep movsd'? I failed to find information on what
+ * value in Direction Flag one can expect and consequently have to
+ * apply "better-safe-than-sorry" approach and assume "undefined."
+ * I could explicitly clear it and restore the original value upon
+ * return from padlock_aes_cipher, but it's presumably too much
+ * trouble for too little gain...
+ *
+ * In case you wonder 'rep xcrypt*' instructions above are *not*
+ * affected by the Direction Flag and pointers advance toward
+ * larger addresses unconditionally.
+ */
+static inline unsigned char *
+padlock_memcpy(void *dst,const void *src,size_t n)
+{
+ long *d=dst;
+ const long *s=src;
+
+ n /= sizeof(*d);
+ do { *d++ = *s++; } while (--n);
+
+ return dst;
+}
+
+#elif defined(_MSC_VER)
+/*
+ * Unlike GCC these are real functions. In order to minimize impact
+ * on performance we adhere to __fastcall calling convention in
+ * order to get two first arguments passed through %ecx and %edx.
+ * Which kind of suits very well, as instructions in question use
+ * both %ecx and %edx as input:-)
+ */
+#define REP_XCRYPT(code) \
+ _asm _emit 0xf3 \
+ _asm _emit 0x0f _asm _emit 0xa7 \
+ _asm _emit code
+
+/* BIG FAT WARNING:
+ * The offsets used with 'lea' instructions
+ * describe items of the 'padlock_cipher_data'
+ * structure.
+ */
+#define PADLOCK_XCRYPT_ASM(name,code) \
+static void * __fastcall \
+ name (size_t cnt, void *cdata, \
+ void *outp, const void *inp) \
+{ _asm mov eax,edx \
+ _asm lea edx,[eax+16] \
+ _asm lea ebx,[eax+32] \
+ _asm mov edi,outp \
+ _asm mov esi,inp \
+ REP_XCRYPT(code) \
+}
+
+PADLOCK_XCRYPT_ASM(padlock_xcrypt_ecb,0xc8)
+PADLOCK_XCRYPT_ASM(padlock_xcrypt_cbc,0xd0)
+PADLOCK_XCRYPT_ASM(padlock_xcrypt_cfb,0xe0)
+PADLOCK_XCRYPT_ASM(padlock_xcrypt_ofb,0xe8)
+
+static int __fastcall
+padlock_xstore(void *outp,unsigned int code)
+{ _asm mov edi,ecx
+ _asm _emit 0x0f _asm _emit 0xa7 _asm _emit 0xc0
+}
+
+static void __fastcall
+padlock_reload_key(void)
+{ _asm pushfd _asm popfd }
+
+static void __fastcall
+padlock_verify_context(void *cdata)
+{ _asm {
+ pushfd
+ bt DWORD PTR[esp],30
+ jnc skip
+ cmp ecx,padlock_saved_context
+ je skip
+ popfd
+ sub esp,4
+ skip: add esp,4
+ mov padlock_saved_context,ecx
+ }
+}
+
+static int
+padlock_available(void)
+{ _asm {
+ pushfd
+ pop eax
+ mov ecx,eax
+ xor eax,1<<21
+ push eax
+ popfd
+ pushfd
+ pop eax
+ xor eax,ecx
+ bt eax,21
+ jnc noluck
+ mov eax,0
+ cpuid
+ xor eax,eax
+ cmp ebx,'tneC'
+ jne noluck
+ cmp edx,'Hrua'
+ jne noluck
+ cmp ecx,'slua'
+ jne noluck
+ mov eax,0xC0000000
+ cpuid
+ mov edx,eax
+ xor eax,eax
+ cmp edx,0xC0000001
+ jb noluck
+ mov eax,0xC0000001
+ cpuid
+ xor eax,eax
+ bt edx,6
+ jnc skip_a
+ bt edx,7
+ jnc skip_a
+ mov padlock_use_ace,1
+ inc eax
+ skip_a: bt edx,2
+ jnc skip_r
+ bt edx,3
+ jnc skip_r
+ mov padlock_use_rng,1
+ inc eax
+ skip_r:
+ noluck:
+ }
+}
+
+static void __fastcall
+padlock_bswapl(void *key)
+{ _asm {
+ pushfd
+ cld
+ mov esi,ecx
+ mov edi,ecx
+ mov ecx,60
+ up: lodsd
+ bswap eax
+ stosd
+ loop up
+ popfd
+ }
+}
+
+/* MS actually specifies status of Direction Flag and compiler even
+ * manages to compile following as 'rep movsd' all by itself...
+ */
+#define padlock_memcpy(o,i,n) ((unsigned char *)memcpy((o),(i),(n)&~3U))
+#endif
+
+/* ===== AES encryption/decryption ===== */
+#ifndef OPENSSL_NO_AES
+
+#if defined(NID_aes_128_cfb128) && ! defined (NID_aes_128_cfb)
+#define NID_aes_128_cfb NID_aes_128_cfb128
+#endif
+
+#if defined(NID_aes_128_ofb128) && ! defined (NID_aes_128_ofb)
+#define NID_aes_128_ofb NID_aes_128_ofb128
+#endif
+
+#if defined(NID_aes_192_cfb128) && ! defined (NID_aes_192_cfb)
+#define NID_aes_192_cfb NID_aes_192_cfb128
+#endif
+
+#if defined(NID_aes_192_ofb128) && ! defined (NID_aes_192_ofb)
+#define NID_aes_192_ofb NID_aes_192_ofb128
+#endif
+
+#if defined(NID_aes_256_cfb128) && ! defined (NID_aes_256_cfb)
+#define NID_aes_256_cfb NID_aes_256_cfb128
+#endif
+
+#if defined(NID_aes_256_ofb128) && ! defined (NID_aes_256_ofb)
+#define NID_aes_256_ofb NID_aes_256_ofb128
+#endif
+
+/* List of supported ciphers. */
+static int padlock_cipher_nids[] = {
+ NID_aes_128_ecb,
+ NID_aes_128_cbc,
+ NID_aes_128_cfb,
+ NID_aes_128_ofb,
+
+ NID_aes_192_ecb,
+ NID_aes_192_cbc,
+ NID_aes_192_cfb,
+ NID_aes_192_ofb,
+
+ NID_aes_256_ecb,
+ NID_aes_256_cbc,
+ NID_aes_256_cfb,
+ NID_aes_256_ofb,
+};
+static int padlock_cipher_nids_num = (sizeof(padlock_cipher_nids)/
+ sizeof(padlock_cipher_nids[0]));
+
+/* Function prototypes ... */
+static int padlock_aes_init_key(EVP_CIPHER_CTX *ctx, const unsigned char *key,
+ const unsigned char *iv, int enc);
+static int padlock_aes_cipher(EVP_CIPHER_CTX *ctx, unsigned char *out,
+ const unsigned char *in, size_t nbytes);
+
+#define NEAREST_ALIGNED(ptr) ( (unsigned char *)(ptr) + \
+ ( (0x10 - ((size_t)(ptr) & 0x0F)) & 0x0F ) )
+#define ALIGNED_CIPHER_DATA(ctx) ((struct padlock_cipher_data *)\
+ NEAREST_ALIGNED(ctx->cipher_data))
+
+#define EVP_CIPHER_block_size_ECB AES_BLOCK_SIZE
+#define EVP_CIPHER_block_size_CBC AES_BLOCK_SIZE
+#define EVP_CIPHER_block_size_OFB 1
+#define EVP_CIPHER_block_size_CFB 1
+
+/* Declaring so many ciphers by hand would be a pain.
+ Instead introduce a bit of preprocessor magic :-) */
+#define DECLARE_AES_EVP(ksize,lmode,umode) \
+static const EVP_CIPHER padlock_aes_##ksize##_##lmode = { \
+ NID_aes_##ksize##_##lmode, \
+ EVP_CIPHER_block_size_##umode, \
+ AES_KEY_SIZE_##ksize, \
+ AES_BLOCK_SIZE, \
+ 0 | EVP_CIPH_##umode##_MODE, \
+ padlock_aes_init_key, \
+ padlock_aes_cipher, \
+ NULL, \
+ sizeof(struct padlock_cipher_data) + 16, \
+ EVP_CIPHER_set_asn1_iv, \
+ EVP_CIPHER_get_asn1_iv, \
+ NULL, \
+ NULL \
+}
+
+DECLARE_AES_EVP(128,ecb,ECB);
+DECLARE_AES_EVP(128,cbc,CBC);
+DECLARE_AES_EVP(128,cfb,CFB);
+DECLARE_AES_EVP(128,ofb,OFB);
+
+DECLARE_AES_EVP(192,ecb,ECB);
+DECLARE_AES_EVP(192,cbc,CBC);
+DECLARE_AES_EVP(192,cfb,CFB);
+DECLARE_AES_EVP(192,ofb,OFB);
+
+DECLARE_AES_EVP(256,ecb,ECB);
+DECLARE_AES_EVP(256,cbc,CBC);
+DECLARE_AES_EVP(256,cfb,CFB);
+DECLARE_AES_EVP(256,ofb,OFB);
+
+static int
+padlock_ciphers (ENGINE *e, const EVP_CIPHER **cipher, const int **nids, int nid)
+{
+ /* No specific cipher => return a list of supported nids ... */
+ if (!cipher) {
+ *nids = padlock_cipher_nids;
+ return padlock_cipher_nids_num;
+ }
+
+ /* ... or the requested "cipher" otherwise */
+ switch (nid) {
+ case NID_aes_128_ecb:
+ *cipher = &padlock_aes_128_ecb;
+ break;
+ case NID_aes_128_cbc:
+ *cipher = &padlock_aes_128_cbc;
+ break;
+ case NID_aes_128_cfb:
+ *cipher = &padlock_aes_128_cfb;
+ break;
+ case NID_aes_128_ofb:
+ *cipher = &padlock_aes_128_ofb;
+ break;
+
+ case NID_aes_192_ecb:
+ *cipher = &padlock_aes_192_ecb;
+ break;
+ case NID_aes_192_cbc:
+ *cipher = &padlock_aes_192_cbc;
+ break;
+ case NID_aes_192_cfb:
+ *cipher = &padlock_aes_192_cfb;
+ break;
+ case NID_aes_192_ofb:
+ *cipher = &padlock_aes_192_ofb;
+ break;
+
+ case NID_aes_256_ecb:
+ *cipher = &padlock_aes_256_ecb;
+ break;
+ case NID_aes_256_cbc:
+ *cipher = &padlock_aes_256_cbc;
+ break;
+ case NID_aes_256_cfb:
+ *cipher = &padlock_aes_256_cfb;
+ break;
+ case NID_aes_256_ofb:
+ *cipher = &padlock_aes_256_ofb;
+ break;
+
+ default:
+ /* Sorry, we don't support this NID */
+ *cipher = NULL;
+ return 0;
+ }
+
+ return 1;
+}
+
+/* Prepare the encryption key for PadLock usage */
+static int
+padlock_aes_init_key (EVP_CIPHER_CTX *ctx, const unsigned char *key,
+ const unsigned char *iv, int enc)
+{
+ struct padlock_cipher_data *cdata;
+ int key_len = EVP_CIPHER_CTX_key_length(ctx) * 8;
+
+ if (key==NULL) return 0; /* ERROR */
+
+ cdata = ALIGNED_CIPHER_DATA(ctx);
+ memset(cdata, 0, sizeof(struct padlock_cipher_data));
+
+ /* Prepare Control word. */
+ if (EVP_CIPHER_CTX_mode(ctx) == EVP_CIPH_OFB_MODE)
+ cdata->cword.b.encdec = 0;
+ else
+ cdata->cword.b.encdec = (ctx->encrypt == 0);
+ cdata->cword.b.rounds = 10 + (key_len - 128) / 32;
+ cdata->cword.b.ksize = (key_len - 128) / 64;
+
+ switch(key_len) {
+ case 128:
+ /* PadLock can generate an extended key for
+ AES128 in hardware */
+ memcpy(cdata->ks.rd_key, key, AES_KEY_SIZE_128);
+ cdata->cword.b.keygen = 0;
+ break;
+
+ case 192:
+ case 256:
+ /* Generate an extended AES key in software.
+ Needed for AES192/AES256 */
+ /* Well, the above applies to Stepping 8 CPUs
+ and is listed as hardware errata. They most
+ likely will fix it at some point and then
+ a check for stepping would be due here. */
+ if (EVP_CIPHER_CTX_mode(ctx) == EVP_CIPH_CFB_MODE ||
+ EVP_CIPHER_CTX_mode(ctx) == EVP_CIPH_OFB_MODE ||
+ enc)
+ AES_set_encrypt_key(key, key_len, &cdata->ks);
+ else
+ AES_set_decrypt_key(key, key_len, &cdata->ks);
+#ifndef AES_ASM
+ /* OpenSSL C functions use byte-swapped extended key. */
+ padlock_bswapl(&cdata->ks);
+#endif
+ cdata->cword.b.keygen = 1;
+ break;
+
+ default:
+ /* ERROR */
+ return 0;
+ }
+
+ /*
+ * This is done to cover for cases when user reuses the
+ * context for new key. The catch is that if we don't do
+ * this, padlock_eas_cipher might proceed with old key...
+ */
+ padlock_reload_key ();
+
+ return 1;
+}
+
+/*
+ * Simplified version of padlock_aes_cipher() used when
+ * 1) both input and output buffers are at aligned addresses.
+ * or when
+ * 2) running on a newer CPU that doesn't require aligned buffers.
+ */
+static int
+padlock_aes_cipher_omnivorous(EVP_CIPHER_CTX *ctx, unsigned char *out_arg,
+ const unsigned char *in_arg, size_t nbytes)
+{
+ struct padlock_cipher_data *cdata;
+ void *iv;
+
+ cdata = ALIGNED_CIPHER_DATA(ctx);
+ padlock_verify_context(cdata);
+
+ switch (EVP_CIPHER_CTX_mode(ctx)) {
+ case EVP_CIPH_ECB_MODE:
+ padlock_xcrypt_ecb(nbytes/AES_BLOCK_SIZE, cdata, out_arg, in_arg);
+ break;
+
+ case EVP_CIPH_CBC_MODE:
+ memcpy(cdata->iv, ctx->iv, AES_BLOCK_SIZE);
+ iv = padlock_xcrypt_cbc(nbytes/AES_BLOCK_SIZE, cdata, out_arg, in_arg);
+ memcpy(ctx->iv, iv, AES_BLOCK_SIZE);
+ break;
+
+ case EVP_CIPH_CFB_MODE:
+ memcpy(cdata->iv, ctx->iv, AES_BLOCK_SIZE);
+ iv = padlock_xcrypt_cfb(nbytes/AES_BLOCK_SIZE, cdata, out_arg, in_arg);
+ memcpy(ctx->iv, iv, AES_BLOCK_SIZE);
+ break;
+
+ case EVP_CIPH_OFB_MODE:
+ memcpy(cdata->iv, ctx->iv, AES_BLOCK_SIZE);
+ padlock_xcrypt_ofb(nbytes/AES_BLOCK_SIZE, cdata, out_arg, in_arg);
+ memcpy(ctx->iv, cdata->iv, AES_BLOCK_SIZE);
+ break;
+
+ default:
+ return 0;
+ }
+
+ memset(cdata->iv, 0, AES_BLOCK_SIZE);
+
+ return 1;
+}
+
+#ifndef PADLOCK_CHUNK
+# define PADLOCK_CHUNK 512 /* Must be a power of 2 larger than 16 */
+#endif
+#if PADLOCK_CHUNK<16 || PADLOCK_CHUNK&(PADLOCK_CHUNK-1)
+# error "insane PADLOCK_CHUNK..."
+#endif
+
+/* Re-align the arguments to 16-Bytes boundaries and run the
+ encryption function itself. This function is not AES-specific. */
+static int
+padlock_aes_cipher(EVP_CIPHER_CTX *ctx, unsigned char *out_arg,
+ const unsigned char *in_arg, size_t nbytes)
+{
+ struct padlock_cipher_data *cdata;
+ const void *inp;
+ unsigned char *out;
+ void *iv;
+ int inp_misaligned, out_misaligned, realign_in_loop;
+ size_t chunk, allocated=0;
+
+ /* ctx->num is maintained in byte-oriented modes,
+ such as CFB and OFB... */
+ if ((chunk = ctx->num)) { /* borrow chunk variable */
+ unsigned char *ivp=ctx->iv;
+
+ switch (EVP_CIPHER_CTX_mode(ctx)) {
+ case EVP_CIPH_CFB_MODE:
+ if (chunk >= AES_BLOCK_SIZE)
+ return 0; /* bogus value */
+
+ if (ctx->encrypt)
+ while (chunk<AES_BLOCK_SIZE && nbytes!=0) {
+ ivp[chunk] = *(out_arg++) = *(in_arg++) ^ ivp[chunk];
+ chunk++, nbytes--;
+ }
+ else while (chunk<AES_BLOCK_SIZE && nbytes!=0) {
+ unsigned char c = *(in_arg++);
+ *(out_arg++) = c ^ ivp[chunk];
+ ivp[chunk++] = c, nbytes--;
+ }
+
+ ctx->num = chunk%AES_BLOCK_SIZE;
+ break;
+ case EVP_CIPH_OFB_MODE:
+ if (chunk >= AES_BLOCK_SIZE)
+ return 0; /* bogus value */
+
+ while (chunk<AES_BLOCK_SIZE && nbytes!=0) {
+ *(out_arg++) = *(in_arg++) ^ ivp[chunk];
+ chunk++, nbytes--;
+ }
+
+ ctx->num = chunk%AES_BLOCK_SIZE;
+ break;
+ }
+ }
+
+ if (nbytes == 0)
+ return 1;
+#if 0
+ if (nbytes % AES_BLOCK_SIZE)
+ return 0; /* are we expected to do tail processing? */
+#else
+ /* nbytes is always multiple of AES_BLOCK_SIZE in ECB and CBC
+ modes and arbitrary value in byte-oriented modes, such as
+ CFB and OFB... */
+#endif
+
+ /* VIA promises CPUs that won't require alignment in the future.
+ For now padlock_aes_align_required is initialized to 1 and
+ the condition is never met... */
+ /* C7 core is capable to manage unaligned input in non-ECB[!]
+ mode, but performance penalties appear to be approximately
+ same as for software alignment below or ~3x. They promise to
+ improve it in the future, but for now we can just as well
+ pretend that it can only handle aligned input... */
+ if (!padlock_aes_align_required && (nbytes%AES_BLOCK_SIZE)==0)
+ return padlock_aes_cipher_omnivorous(ctx, out_arg, in_arg, nbytes);
+
+ inp_misaligned = (((size_t)in_arg) & 0x0F);
+ out_misaligned = (((size_t)out_arg) & 0x0F);
+
+ /* Note that even if output is aligned and input not,
+ * I still prefer to loop instead of copy the whole
+ * input and then encrypt in one stroke. This is done
+ * in order to improve L1 cache utilization... */
+ realign_in_loop = out_misaligned|inp_misaligned;
+
+ if (!realign_in_loop && (nbytes%AES_BLOCK_SIZE)==0)
+ return padlock_aes_cipher_omnivorous(ctx, out_arg, in_arg, nbytes);
+
+ /* this takes one "if" out of the loops */
+ chunk = nbytes;
+ chunk %= PADLOCK_CHUNK;
+ if (chunk==0) chunk = PADLOCK_CHUNK;
+
+ if (out_misaligned) {
+ /* optmize for small input */
+ allocated = (chunk<nbytes?PADLOCK_CHUNK:nbytes);
+ out = alloca(0x10 + allocated);
+ out = NEAREST_ALIGNED(out);
+ }
+ else
+ out = out_arg;
+
+ cdata = ALIGNED_CIPHER_DATA(ctx);
+ padlock_verify_context(cdata);
+
+ switch (EVP_CIPHER_CTX_mode(ctx)) {
+ case EVP_CIPH_ECB_MODE:
+ do {
+ if (inp_misaligned)
+ inp = padlock_memcpy(out, in_arg, chunk);
+ else
+ inp = in_arg;
+ in_arg += chunk;
+
+ padlock_xcrypt_ecb(chunk/AES_BLOCK_SIZE, cdata, out, inp);
+
+ if (out_misaligned)
+ out_arg = padlock_memcpy(out_arg, out, chunk) + chunk;
+ else
+ out = out_arg+=chunk;
+
+ nbytes -= chunk;
+ chunk = PADLOCK_CHUNK;
+ } while (nbytes);
+ break;
+
+ case EVP_CIPH_CBC_MODE:
+ memcpy(cdata->iv, ctx->iv, AES_BLOCK_SIZE);
+ goto cbc_shortcut;
+ do {
+ if (iv != cdata->iv)
+ memcpy(cdata->iv, iv, AES_BLOCK_SIZE);
+ chunk = PADLOCK_CHUNK;
+ cbc_shortcut: /* optimize for small input */
+ if (inp_misaligned)
+ inp = padlock_memcpy(out, in_arg, chunk);
+ else
+ inp = in_arg;
+ in_arg += chunk;
+
+ iv = padlock_xcrypt_cbc(chunk/AES_BLOCK_SIZE, cdata, out, inp);
+
+ if (out_misaligned)
+ out_arg = padlock_memcpy(out_arg, out, chunk) + chunk;
+ else
+ out = out_arg+=chunk;
+
+ } while (nbytes -= chunk);
+ memcpy(ctx->iv, iv, AES_BLOCK_SIZE);
+ break;
+
+ case EVP_CIPH_CFB_MODE:
+ memcpy (iv = cdata->iv, ctx->iv, AES_BLOCK_SIZE);
+ chunk &= ~(AES_BLOCK_SIZE-1);
+ if (chunk) goto cfb_shortcut;
+ else goto cfb_skiploop;
+ do {
+ if (iv != cdata->iv)
+ memcpy(cdata->iv, iv, AES_BLOCK_SIZE);
+ chunk = PADLOCK_CHUNK;
+ cfb_shortcut: /* optimize for small input */
+ if (inp_misaligned)
+ inp = padlock_memcpy(out, in_arg, chunk);
+ else
+ inp = in_arg;
+ in_arg += chunk;
+
+ iv = padlock_xcrypt_cfb(chunk/AES_BLOCK_SIZE, cdata, out, inp);
+
+ if (out_misaligned)
+ out_arg = padlock_memcpy(out_arg, out, chunk) + chunk;
+ else
+ out = out_arg+=chunk;
+
+ nbytes -= chunk;
+ } while (nbytes >= AES_BLOCK_SIZE);
+
+ cfb_skiploop:
+ if (nbytes) {
+ unsigned char *ivp = cdata->iv;
+
+ if (iv != ivp) {
+ memcpy(ivp, iv, AES_BLOCK_SIZE);
+ iv = ivp;
+ }
+ ctx->num = nbytes;
+ if (cdata->cword.b.encdec) {
+ cdata->cword.b.encdec=0;
+ padlock_reload_key();
+ padlock_xcrypt_ecb(1,cdata,ivp,ivp);
+ cdata->cword.b.encdec=1;
+ padlock_reload_key();
+ while(nbytes) {
+ unsigned char c = *(in_arg++);
+ *(out_arg++) = c ^ *ivp;
+ *(ivp++) = c, nbytes--;
+ }
+ }
+ else { padlock_reload_key();
+ padlock_xcrypt_ecb(1,cdata,ivp,ivp);
+ padlock_reload_key();
+ while (nbytes) {
+ *ivp = *(out_arg++) = *(in_arg++) ^ *ivp;
+ ivp++, nbytes--;
+ }
+ }
+ }
+
+ memcpy(ctx->iv, iv, AES_BLOCK_SIZE);
+ break;
+
+ case EVP_CIPH_OFB_MODE:
+ memcpy(cdata->iv, ctx->iv, AES_BLOCK_SIZE);
+ chunk &= ~(AES_BLOCK_SIZE-1);
+ if (chunk) do {
+ if (inp_misaligned)
+ inp = padlock_memcpy(out, in_arg, chunk);
+ else
+ inp = in_arg;
+ in_arg += chunk;
+
+ padlock_xcrypt_ofb(chunk/AES_BLOCK_SIZE, cdata, out, inp);
+
+ if (out_misaligned)
+ out_arg = padlock_memcpy(out_arg, out, chunk) + chunk;
+ else
+ out = out_arg+=chunk;
+
+ nbytes -= chunk;
+ chunk = PADLOCK_CHUNK;
+ } while (nbytes >= AES_BLOCK_SIZE);
+
+ if (nbytes) {
+ unsigned char *ivp = cdata->iv;
+
+ ctx->num = nbytes;
+ padlock_reload_key(); /* empirically found */
+ padlock_xcrypt_ecb(1,cdata,ivp,ivp);
+ padlock_reload_key(); /* empirically found */
+ while (nbytes) {
+ *(out_arg++) = *(in_arg++) ^ *ivp;
+ ivp++, nbytes--;
+ }
+ }
+
+ memcpy(ctx->iv, cdata->iv, AES_BLOCK_SIZE);
+ break;
+
+ default:
+ return 0;
+ }
+
+ /* Clean the realign buffer if it was used */
+ if (out_misaligned) {
+ volatile unsigned long *p=(void *)out;
+ size_t n = allocated/sizeof(*p);
+ while (n--) *p++=0;
+ }
+
+ memset(cdata->iv, 0, AES_BLOCK_SIZE);
+
+ return 1;
+}
+
+#endif /* OPENSSL_NO_AES */
+
+/* ===== Random Number Generator ===== */
+/*
+ * This code is not engaged. The reason is that it does not comply
+ * with recommendations for VIA RNG usage for secure applications
+ * (posted at http://www.via.com.tw/en/viac3/c3.jsp) nor does it
+ * provide meaningful error control...
+ */
+/* Wrapper that provides an interface between the API and
+ the raw PadLock RNG */
+static int
+padlock_rand_bytes(unsigned char *output, int count)
+{
+ unsigned int eax, buf;
+
+ while (count >= 8) {
+ eax = padlock_xstore(output, 0);
+ if (!(eax&(1<<6))) return 0; /* RNG disabled */
+ /* this ---vv--- covers DC bias, Raw Bits and String Filter */
+ if (eax&(0x1F<<10)) return 0;
+ if ((eax&0x1F)==0) continue; /* no data, retry... */
+ if ((eax&0x1F)!=8) return 0; /* fatal failure... */
+ output += 8;
+ count -= 8;
+ }
+ while (count > 0) {
+ eax = padlock_xstore(&buf, 3);
+ if (!(eax&(1<<6))) return 0; /* RNG disabled */
+ /* this ---vv--- covers DC bias, Raw Bits and String Filter */
+ if (eax&(0x1F<<10)) return 0;
+ if ((eax&0x1F)==0) continue; /* no data, retry... */
+ if ((eax&0x1F)!=1) return 0; /* fatal failure... */
+ *output++ = (unsigned char)buf;
+ count--;
+ }
+ *(volatile unsigned int *)&buf=0;
+
+ return 1;
+}
+
+/* Dummy but necessary function */
+static int
+padlock_rand_status(void)
+{
+ return 1;
+}
+
+/* Prepare structure for registration */
+static RAND_METHOD padlock_rand = {
+ NULL, /* seed */
+ padlock_rand_bytes, /* bytes */
+ NULL, /* cleanup */
+ NULL, /* add */
+ padlock_rand_bytes, /* pseudorand */
+ padlock_rand_status, /* rand status */
+};
+
+#else /* !COMPILE_HW_PADLOCK */
+#ifndef OPENSSL_NO_DYNAMIC_ENGINE
+OPENSSL_EXPORT
+int bind_engine(ENGINE *e, const char *id, const dynamic_fns *fns);
+OPENSSL_EXPORT
+int bind_engine(ENGINE *e, const char *id, const dynamic_fns *fns) { return 0; }
+IMPLEMENT_DYNAMIC_CHECK_FN()
+#endif
+#endif /* COMPILE_HW_PADLOCK */
+
+#endif /* !OPENSSL_NO_HW_PADLOCK */
+#endif /* !OPENSSL_NO_HW */
|