aboutsummaryrefslogtreecommitdiff
path: root/openssl/engines/makeengines.com
diff options
context:
space:
mode:
Diffstat (limited to 'openssl/engines/makeengines.com')
-rw-r--r--openssl/engines/makeengines.com1982
1 files changed, 1021 insertions, 961 deletions
diff --git a/openssl/engines/makeengines.com b/openssl/engines/makeengines.com
index 6cf423607..a7e4aa86d 100644
--- a/openssl/engines/makeengines.com
+++ b/openssl/engines/makeengines.com
@@ -1,961 +1,1021 @@
-$!
-$! MAKEENGINES.COM
-$! Written By: Richard Levitte
-$! richard@levitte.org
-$!
-$! This command file compiles and creates the various engines in form
-$! of shared images. They are placed in [.xxx.EXE.ENGINES], where "xxx"
-$! is ALPHA, IA64 or VAX, depending on your hardware.
-$!
-$! P1 if this is ENGINES or ALL, the engines will build, otherwise not.
-$!
-$! P2 DEBUG or NODEBUG to compile with or without debugger information.
-$!
-$! P3 VAXC for VAX C
-$! DECC for DEC C
-$! GNUC for GNU C (untested)
-$!
-$! P4 if defined, sets the TCP/IP libraries to use. UCX or TCPIP is
-$! used by default since most other implementations come with a
-$! compatibility library. The value must be one of the following:
-$!
-$! UCX for UCX
-$! SOCKETSHR for SOCKETSHR+NETLIB
-$! TCPIP for TCPIP (post UCX)
-$!
-$! P5 if defined, tells the compiler not to use special threads.
-$!
-$! P6 if defined, denotes which engines to build. If not defined,
-$! all available engines are built.
-$!
-$!-----------------------------------------------------------------------------
-$!
-$! Set the default TCP/IP library to link against if needed
-$!
-$ TCPIP_LIB = ""
-$!
-$! Check What Architecture We Are Using.
-$!
-$ IF (F$GETSYI("CPU").LT.128)
-$ THEN
-$!
-$! The Architecture Is VAX.
-$!
-$ ARCH = "VAX"
-$!
-$! Else...
-$!
-$ ELSE
-$!
-$! The Architecture Is Alpha, IA64 or whatever comes in the future.
-$!
-$ ARCH = F$EDIT( F$GETSYI( "ARCH_NAME"), "UPCASE")
-$ IF (ARCH .EQS. "") THEN ARCH = "UNK"
-$!
-$! End The Architecture Check.
-$!
-$ ENDIF
-$!
-$! Set the names of the engines we want to build
-$! NOTE: Some might think this list ugly. However, it's made this way to
-$! reflect the LIBNAMES variable in Makefile as closely as possible,
-$! thereby making it fairly easy to verify that the lists are the same.
-$! NOTE: gmp isn't built, as it's mostly a test engine and brings in another
-$! library that isn't necessarely ported to VMS.
-$!
-$ ENGINES = "," + P6
-$ IF ENGINES .EQS. "," THEN -
- ENGINES = ",4758cca,aep,atalla,cswift,chil,nuron,sureware,ubsec,padlock,"
-$!
-$! GOST requires a 64-bit integer type, unavailable on VAX.
-$!
-$ IF (ARCH .NES. "VAX") THEN -
- ENGINES = ENGINES+ ",ccgost"
-$!
-$! Set the goal directories, and create them if necessary
-$!
-$ OBJ_DIR := SYS$DISK:[-.'ARCH'.OBJ.ENGINES]
-$ EXE_DIR := SYS$DISK:[-.'ARCH'.EXE.ENGINES]
-$ IF F$PARSE(OBJ_DIR) .EQS. "" THEN CREATE/DIRECTORY 'OBJ_DIR'
-$ IF F$PARSE(EXE_DIR) .EQS. "" THEN CREATE/DIRECTORY 'EXE_DIR'
-$!
-$! Set the goal files, and create them if necessary
-$!
-$ CRYPTO_LIB :=SYS$DISK:[-.'ARCH'.EXE.CRYPTO]LIBCRYPTO.OLB
-$ IF F$SEARCH(CRYPTO_LIB) .EQS. "" THEN LIBRARY/CREATE/OBJECT 'CRYPTO_LIB'
-$!
-$! OK, time to check options and initialise
-$!
-$ OPT_PHASE = P1
-$ ACCEPT_PHASE = "ALL,ENGINES"
-$ OPT_DEBUG = P2
-$ OPT_COMPILER = P3
-$ OPT_TCPIP_LIB = P4
-$ OPT_SPECIAL_THREADS = P5
-$
-$ GOSUB CHECK_OPTIONS
-$ GOSUB INITIALISE
-$ GOSUB CHECK_OPT_FILE
-$!
-$! Define what goes into each engine. VAX includes a transfer vector.
-$!
-$ ENGINE_ = ""
-$ TV_OBJ = ""
-$ IF ARCH .EQS. "VAX"
-$ THEN
-$ ENGINE_ = "engine_vector.mar"
-$ TV_OBJ_NAME = OBJ_DIR + F$PARSE(ENGINE_,,,"NAME","SYNTAX_ONLY") + ".OBJ"
-$ TV_OBJ = ",''TV_OBJ_NAME'"
-$ ENDIF
-$ ENGINE_4758CCA = "e_4758cca"
-$ ENGINE_aep = "e_aep"
-$ ENGINE_atalla = "e_atalla"
-$ ENGINE_cswift = "e_cswift"
-$ ENGINE_chil = "e_chil"
-$ ENGINE_nuron = "e_nuron"
-$ ENGINE_sureware = "e_sureware"
-$ ENGINE_ubsec = "e_ubsec"
-$ ENGINE_padlock = "e_padlock"
-$
-$ ENGINE_ccgost_SUBDIR = "ccgost"
-$ ENGINE_ccgost = "e_gost_err,gost2001_keyx,gost2001,gost89,gost94_keyx,"+ -
- "gost_ameth,gost_asn1,gost_crypt,gost_ctl,gost_eng,"+ -
- "gosthash,gost_keywrap,gost_md,gost_params,gost_pmeth,"+ -
- "gost_sign"
-$!
-$! Define which programs need to be linked with a TCP/IP library
-$!
-$ TCPIP_ENGINES = ",,"
-$ IF COMPILER .EQS. "VAXC" THEN -
- TCPIP_ENGINES = ",,"
-$!
-$! Set up two loops, one that keeps track of the engines,
-$! and one that keeps track of all the files going into
-$! the current engine.
-$!
-$! Here's the start of the engine loop.
-$!
-$ ENGINE_COUNTER = 0
-$ ENGINE_NEXT:
-$!
-$! Extract the current engine name, and if we've reached the end, stop
-$!
-$ ENGINE_NAME = F$ELEMENT(ENGINE_COUNTER,",",ENGINES)
-$ IF (ENGINE_NAME.EQS.",") THEN GOTO ENGINE_DONE
-$!
-$ ENGINE_COUNTER = ENGINE_COUNTER + 1
-$!
-$! Set up the engine library names.
-$!
-$ LIB_ENGINE = "ENGINE_" + ENGINE_NAME
-$!
-$! Check if the library module name actually is defined
-$!
-$ IF F$TYPE('LIB_ENGINE') .EQS. ""
-$ THEN
-$ WRITE SYS$ERROR ""
-$ WRITE SYS$ERROR "The module ",ENGINE_NAME," does not exist. Continuing..."
-$ WRITE SYS$ERROR ""
-$ GOTO ENGINE_NEXT
-$ ENDIF
-$!
-$! Talk to the user
-$!
-$ IF ENGINE_NAME .NES. ""
-$ THEN
-$ WRITE SYS$OUTPUT "Compiling The ",ENGINE_NAME," Library Files. (",BUILDALL,")"
-$ ELSE
-$ WRITE SYS$OUTPUT "Compiling Support Files. (",BUILDALL,")"
-$ ENDIF
-$!
-$! Create a .OPT file for the object files (for a real engine name).
-$!
-$ IF ENGINE_NAME .NES. ""
-$ THEN
-$ OPEN/WRITE OBJECTS 'EXE_DIR''ENGINE_NAME'.OPT
-$ ENDIF
-$!
-$! Here's the start of per-engine module loop.
-$!
-$ FILE_COUNTER = 0
-$ FILE_NEXT:
-$!
-$! Extract the file name from the file list, and if we've reached the end, stop
-$!
-$ FILE_NAME = F$ELEMENT(FILE_COUNTER,",",'LIB_ENGINE')
-$ IF (FILE_NAME.EQS.",") THEN GOTO FILE_DONE
-$!
-$ FILE_COUNTER = FILE_COUNTER + 1
-$!
-$ IF FILE_NAME .EQS. "" THEN GOTO FILE_NEXT
-$!
-$! Set up the source and object reference
-$!
-$ IF F$TYPE('LIB_ENGINE'_SUBDIR) .EQS. ""
-$ THEN
-$ SOURCE_FILE = F$PARSE(FILE_NAME,"SYS$DISK:[].C",,,"SYNTAX_ONLY")
-$ ELSE
-$ SOURCE_FILE = F$PARSE(FILE_NAME,"SYS$DISK:[."+'LIB_ENGINE'_SUBDIR+"].C",,,"SYNTAX_ONLY")
-$ ENDIF
-$ OBJECT_FILE = OBJ_DIR + F$PARSE(FILE_NAME,,,"NAME","SYNTAX_ONLY") + ".OBJ"
-$!
-$! If we get some problem, we just go on trying to build the next module.
-$ ON WARNING THEN GOTO FILE_NEXT
-$!
-$! Check if the module we want to compile is actually there.
-$!
-$ IF F$SEARCH(SOURCE_FILE) .EQS. ""
-$ THEN
-$ WRITE SYS$OUTPUT ""
-$ WRITE SYS$OUTPUT "The File ",SOURCE_FILE," Doesn't Exist."
-$ WRITE SYS$OUTPUT ""
-$ GOTO EXIT
-$ ENDIF
-$!
-$! Talk to the user.
-$!
-$ WRITE SYS$OUTPUT " ",FILE_NAME,""
-$!
-$! Do the dirty work.
-$!
-$ ON ERROR THEN GOTO FILE_NEXT
-$ IF F$EDIT(F$PARSE(SOURCE_FILE,,,"TYPE","SYNTAX_ONLY"),"UPCASE") .EQS. ".MAR"
-$ THEN
-$ MACRO/OBJECT='OBJECT_FILE' 'SOURCE_FILE'
-$ ELSE
-$ CC/OBJECT='OBJECT_FILE' 'SOURCE_FILE'
-$ ENDIF
-$!
-$! Write the entry to the .OPT file (for a real engine name).
-$!
-$ IF ENGINE_NAME .NES. ""
-$ THEN
-$ WRITE OBJECTS OBJECT_FILE
-$ ENDIF
-$!
-$! Next file
-$!
-$ GOTO FILE_NEXT
-$!
-$ FILE_DONE:
-$!
-$! Do not link the support files.
-$!
-$ IF ENGINE_NAME .EQS. "" THEN GOTO ENGINE_NEXT
-$!
-$! Close the linker options file (for a real engine name).
-$!
-$ CLOSE OBJECTS
-$!
-$! Now, there are two ways to handle this. We can either build
-$! shareable images or stick the engine object file into libcrypto.
-$! For now, the latter is NOT supported.
-$!
-$!!!!! LIBRARY/REPLACE 'CRYPTO_LIB' 'OBJECT_FILE'
-$!
-$! For shareable libraries, we need to do things a little differently
-$! depending on if we link with a TCP/IP library or not.
-$!
-$ ENGINE_OPT := SYS$DISK:[]'ARCH'.OPT
-$ IF TCPIP_LIB .NES. ""
-$ THEN
-$ LINK/'DEBUGGER'/'TRACEBACK' /SHARE='EXE_DIR''ENGINE_NAME'.EXE -
- 'EXE_DIR''ENGINE_NAME'.OPT/OPTION'TV_OBJ', -
- 'CRYPTO_LIB'/LIBRARY, -
- 'ENGINE_OPT'/OPTION,'TCPIP_LIB','OPT_FILE'/OPTION
-$ ELSE
-$ LINK/'DEBUGGER'/'TRACEBACK' /SHARE='EXE_DIR''ENGINE_NAME'.EXE -
- 'EXE_DIR''ENGINE_NAME'.OPT/OPTION'TV_OBJ', -
- 'CRYPTO_LIB'/LIBRARY, -
- 'ENGINE_OPT'/OPTION,'OPT_FILE'/OPTION
-$ ENDIF
-$!
-$! Next engine
-$!
-$ GOTO ENGINE_NEXT
-$!
-$ ENGINE_DONE:
-$!
-$! Talk to the user
-$!
-$ WRITE SYS$OUTPUT "All Done..."
-$ EXIT:
-$ GOSUB CLEANUP
-$ EXIT
-$!
-$! Check For The Link Option FIle.
-$!
-$ CHECK_OPT_FILE:
-$!
-$! Check To See If We Need To Make A VAX C Option File.
-$!
-$ IF (COMPILER.EQS."VAXC")
-$ THEN
-$!
-$! Check To See If We Already Have A VAX C Linker Option File.
-$!
-$ IF (F$SEARCH(OPT_FILE).EQS."")
-$ THEN
-$!
-$! We Need A VAX C Linker Option File.
-$!
-$ CREATE 'OPT_FILE'
-$DECK
-!
-! Default System Options File To Link Agianst
-! The Sharable VAX C Runtime Library.
-!
-SYS$SHARE:VAXCRTL.EXE/SHARE
-$EOD
-$!
-$! End The Option File Check.
-$!
-$ ENDIF
-$!
-$! End The VAXC Check.
-$!
-$ ENDIF
-$!
-$! Check To See If We Need A GNU C Option File.
-$!
-$ IF (COMPILER.EQS."GNUC")
-$ THEN
-$!
-$! Check To See If We Already Have A GNU C Linker Option File.
-$!
-$ IF (F$SEARCH(OPT_FILE).EQS."")
-$ THEN
-$!
-$! We Need A GNU C Linker Option File.
-$!
-$ CREATE 'OPT_FILE'
-$DECK
-!
-! Default System Options File To Link Agianst
-! The Sharable C Runtime Library.
-!
-GNU_CC:[000000]GCCLIB/LIBRARY
-SYS$SHARE:VAXCRTL/SHARE
-$EOD
-$!
-$! End The Option File Check.
-$!
-$ ENDIF
-$!
-$! End The GNU C Check.
-$!
-$ ENDIF
-$!
-$! Check To See If We Need A DEC C Option File.
-$!
-$ IF (COMPILER.EQS."DECC")
-$ THEN
-$!
-$! Check To See If We Already Have A DEC C Linker Option File.
-$!
-$ IF (F$SEARCH(OPT_FILE).EQS."")
-$ THEN
-$!
-$! Figure Out If We Need A non-VAX Or A VAX Linker Option File.
-$!
-$ IF ARCH .EQS. "VAX"
-$ THEN
-$!
-$! We Need A DEC C Linker Option File For VAX.
-$!
-$ CREATE 'OPT_FILE'
-$DECK
-!
-! Default System Options File To Link Agianst
-! The Sharable DEC C Runtime Library.
-!
-SYS$SHARE:DECC$SHR.EXE/SHARE
-$EOD
-$!
-$! Else...
-$!
-$ ELSE
-$!
-$! Create The non-VAX Linker Option File.
-$!
-$ CREATE 'OPT_FILE'
-$DECK
-!
-! Default System Options File For non-VAX To Link Agianst
-! The Sharable C Runtime Library.
-!
-SYS$SHARE:CMA$OPEN_LIB_SHR/SHARE
-SYS$SHARE:CMA$OPEN_RTL/SHARE
-$EOD
-$!
-$! End The DEC C Option File Check.
-$!
-$ ENDIF
-$!
-$! End The Option File Search.
-$!
-$ ENDIF
-$!
-$! End The DEC C Check.
-$!
-$ ENDIF
-$!
-$! Tell The User What Linker Option File We Are Using.
-$!
-$ WRITE SYS$OUTPUT "Using Linker Option File ",OPT_FILE,"."
-$!
-$! Time To RETURN.
-$!
-$ RETURN
-$!
-$! Check The User's Options.
-$!
-$ CHECK_OPTIONS:
-$!
-$! Check To See If OPT_PHASE Is Blank.
-$!
-$ IF (OPT_PHASE.EQS."ALL")
-$ THEN
-$!
-$! OPT_PHASE Is Blank, So Build Everything.
-$!
-$ BUILDALL = "ALL"
-$!
-$! Else...
-$!
-$ ELSE
-$!
-$! Else, Check To See If OPT_PHASE Has A Valid Argument.
-$!
-$ IF ("," + ACCEPT_PHASE + ",") - ("," + OPT_PHASE + ",") -
- .NES. ("," + ACCEPT_PHASE + ",")
-$ THEN
-$!
-$! A Valid Argument.
-$!
-$ BUILDALL = OPT_PHASE
-$!
-$! Else...
-$!
-$ ELSE
-$!
-$! Tell The User We Don't Know What They Want.
-$!
-$ WRITE SYS$OUTPUT ""
-$ WRITE SYS$OUTPUT "The option ",OPT_PHASE," is invalid. The valid options are:"
-$ WRITE SYS$OUTPUT ""
-$ IF ("," + ACCEPT_PHASE + ",") - ",ALL," -
- .NES. ("," + ACCEPT_PHASE + ",") THEN -
- WRITE SYS$OUTPUT " ALL : just build everything."
-$ IF ("," + ACCEPT_PHASE + ",") - ",ENGINES," -
- .NES. ("," + ACCEPT_PHASE + ",") THEN -
- WRITE SYS$OUTPUT " ENGINES : to compile just the [.xxx.EXE.ENGINES]*.EXE hareable images."
-$ WRITE SYS$OUTPUT ""
-$ WRITE SYS$OUTPUT " where 'xxx' stands for:"
-$ WRITE SYS$OUTPUT ""
-$ WRITE SYS$OUTPUT " ALPHA : Alpha architecture."
-$ WRITE SYS$OUTPUT " IA64 : IA64 architecture."
-$ WRITE SYS$OUTPUT " VAX : VAX architecture."
-$ WRITE SYS$OUTPUT ""
-$!
-$! Time To EXIT.
-$!
-$ EXIT
-$!
-$! End The Valid Argument Check.
-$!
-$ ENDIF
-$!
-$! End The OPT_PHASE Check.
-$!
-$ ENDIF
-$!
-$! Check To See If OPT_DEBUG Is Blank.
-$!
-$ IF (OPT_DEBUG.EQS."NODEBUG")
-$ THEN
-$!
-$! OPT_DEBUG Is NODEBUG, So Compile Without The Debugger Information.
-$!
-$ DEBUGGER = "NODEBUG"
-$ TRACEBACK = "NOTRACEBACK"
-$ GCC_OPTIMIZE = "OPTIMIZE"
-$ CC_OPTIMIZE = "OPTIMIZE"
-$ MACRO_OPTIMIZE = "OPTIMIZE"
-$ WRITE SYS$OUTPUT "No Debugger Information Will Be Produced During Compile."
-$ WRITE SYS$OUTPUT "Compiling With Compiler Optimization."
-$ ELSE
-$!
-$! Check To See If We Are To Compile With Debugger Information.
-$!
-$ IF (OPT_DEBUG.EQS."DEBUG")
-$ THEN
-$!
-$! Compile With Debugger Information.
-$!
-$ DEBUGGER = "DEBUG"
-$ TRACEBACK = "TRACEBACK"
-$ GCC_OPTIMIZE = "NOOPTIMIZE"
-$ CC_OPTIMIZE = "NOOPTIMIZE"
-$ MACRO_OPTIMIZE = "NOOPTIMIZE"
-$ WRITE SYS$OUTPUT "Debugger Information Will Be Produced During Compile."
-$ WRITE SYS$OUTPUT "Compiling Without Compiler Optimization."
-$ ELSE
-$!
-$! They Entered An Invalid Option..
-$!
-$ WRITE SYS$OUTPUT ""
-$ WRITE SYS$OUTPUT "The Option ",OPT_DEBUG," Is Invalid. The Valid Options Are:"
-$ WRITE SYS$OUTPUT ""
-$ WRITE SYS$OUTPUT " DEBUG : Compile With The Debugger Information."
-$ WRITE SYS$OUTPUT " NODEBUG : Compile Without The Debugger Information."
-$ WRITE SYS$OUTPUT ""
-$!
-$! Time To EXIT.
-$!
-$ EXIT
-$!
-$! End The Valid Argument Check.
-$!
-$ ENDIF
-$!
-$! End The OPT_DEBUG Check.
-$!
-$ ENDIF
-$!
-$! Special Threads For OpenVMS v7.1 Or Later
-$!
-$! Written By: Richard Levitte
-$! richard@levitte.org
-$!
-$!
-$! Check To See If We Have A Option For OPT_SPECIAL_THREADS.
-$!
-$ IF (OPT_SPECIAL_THREADS.EQS."")
-$ THEN
-$!
-$! Get The Version Of VMS We Are Using.
-$!
-$ ISSEVEN :=
-$ TMP = F$ELEMENT(0,"-",F$EXTRACT(1,4,F$GETSYI("VERSION")))
-$ TMP = F$INTEGER(F$ELEMENT(0,".",TMP)+F$ELEMENT(1,".",TMP))
-$!
-$! Check To See If The VMS Version Is v7.1 Or Later.
-$!
-$ IF (TMP.GE.71)
-$ THEN
-$!
-$! We Have OpenVMS v7.1 Or Later, So Use The Special Threads.
-$!
-$ ISSEVEN := ,PTHREAD_USE_D4
-$!
-$! End The VMS Version Check.
-$!
-$ ENDIF
-$!
-$! End The OPT_SPECIAL_THREADS Check.
-$!
-$ ENDIF
-$!
-$! Check To See If OPT_COMPILER Is Blank.
-$!
-$ IF (OPT_COMPILER.EQS."")
-$ THEN
-$!
-$! O.K., The User Didn't Specify A Compiler, Let's Try To
-$! Find Out Which One To Use.
-$!
-$! Check To See If We Have GNU C.
-$!
-$ IF (F$TRNLNM("GNU_CC").NES."")
-$ THEN
-$!
-$! Looks Like GNUC, Set To Use GNUC.
-$!
-$ OPT_COMPILER = "GNUC"
-$!
-$! Else...
-$!
-$ ELSE
-$!
-$! Check To See If We Have VAXC Or DECC.
-$!
-$ IF (ARCH.NES."VAX").OR.(F$TRNLNM("DECC$CC_DEFAULT").NES."")
-$ THEN
-$!
-$! Looks Like DECC, Set To Use DECC.
-$!
-$ OPT_COMPILER = "DECC"
-$!
-$! Else...
-$!
-$ ELSE
-$!
-$! Looks Like VAXC, Set To Use VAXC.
-$!
-$ OPT_COMPILER = "VAXC"
-$!
-$! End The VAXC Compiler Check.
-$!
-$ ENDIF
-$!
-$! End The DECC & VAXC Compiler Check.
-$!
-$ ENDIF
-$!
-$! End The Compiler Check.
-$!
-$ ENDIF
-$!
-$! Check To See If We Have A Option For OPT_TCPIP_LIB.
-$!
-$ IF (OPT_TCPIP_LIB.EQS."")
-$ THEN
-$!
-$! Find out what socket library we have available
-$!
-$ IF F$PARSE("SOCKETSHR:") .NES. ""
-$ THEN
-$!
-$! We have SOCKETSHR, and it is my opinion that it's the best to use.
-$!
-$ OPT_TCPIP_LIB = "SOCKETSHR"
-$!
-$! Tell the user
-$!
-$ WRITE SYS$OUTPUT "Using SOCKETSHR for TCP/IP"
-$!
-$! Else, let's look for something else
-$!
-$ ELSE
-$!
-$! Like UCX (the reason to do this before Multinet is that the UCX
-$! emulation is easier to use...)
-$!
-$ IF F$TRNLNM("UCX$IPC_SHR") .NES. "" -
- .OR. F$PARSE("SYS$SHARE:UCX$IPC_SHR.EXE") .NES. "" -
- .OR. F$PARSE("SYS$LIBRARY:UCX$IPC.OLB") .NES. ""
-$ THEN
-$!
-$! Last resort: a UCX or UCX-compatible library
-$!
-$ OPT_TCPIP_LIB = "UCX"
-$!
-$! Tell the user
-$!
-$ WRITE SYS$OUTPUT "Using UCX or an emulation thereof for TCP/IP"
-$!
-$! That was all...
-$!
-$ ENDIF
-$ ENDIF
-$ ENDIF
-$!
-$! Set Up Initial CC Definitions, Possibly With User Ones
-$!
-$ CCDEFS = "TCPIP_TYPE_''OPT_TCPIP_LIB',DSO_VMS"
-$ IF F$TYPE(USER_CCDEFS) .NES. "" THEN CCDEFS = CCDEFS + "," + USER_CCDEFS
-$ CCEXTRAFLAGS = ""
-$ IF F$TYPE(USER_CCFLAGS) .NES. "" THEN CCEXTRAFLAGS = USER_CCFLAGS
-$ CCDISABLEWARNINGS = "LONGLONGTYPE,LONGLONGSUFX"
-$ IF F$TYPE(USER_CCDISABLEWARNINGS) .NES. "" THEN -
- CCDISABLEWARNINGS = CCDISABLEWARNINGS + "," + USER_CCDISABLEWARNINGS
-$!
-$! Check To See If The User Entered A Valid Paramter.
-$!
-$ IF (OPT_COMPILER.EQS."VAXC").OR.(OPT_COMPILER.EQS."DECC").OR.(OPT_COMPILER.EQS."GNUC")
-$ THEN
-$!
-$! Check To See If The User Wanted DECC.
-$!
-$ IF (OPT_COMPILER.EQS."DECC")
-$ THEN
-$!
-$! Looks Like DECC, Set To Use DECC.
-$!
-$ COMPILER = "DECC"
-$!
-$! Tell The User We Are Using DECC.
-$!
-$ WRITE SYS$OUTPUT "Using DECC 'C' Compiler."
-$!
-$! Use DECC...
-$!
-$ CC = "CC"
-$ IF ARCH.EQS."VAX" .AND. F$TRNLNM("DECC$CC_DEFAULT").NES."/DECC" -
- THEN CC = "CC/DECC"
-$ CC = CC + "/''CC_OPTIMIZE'/''DEBUGGER'/STANDARD=ANSI89" + -
- "/NOLIST/PREFIX=ALL" + -
- "/INCLUDE=(SYS$DISK:[],SYS$DISK:[.VENDOR_DEFNS])" + -
- CCEXTRAFLAGS
-$!
-$! Define The Linker Options File Name.
-$!
-$ OPT_FILE = "''EXE_DIR'VAX_DECC_OPTIONS.OPT"
-$!
-$! End DECC Check.
-$!
-$ ENDIF
-$!
-$! Check To See If We Are To Use VAXC.
-$!
-$ IF (OPT_COMPILER.EQS."VAXC")
-$ THEN
-$!
-$! Looks Like VAXC, Set To Use VAXC.
-$!
-$ COMPILER = "VAXC"
-$!
-$! Tell The User We Are Using VAX C.
-$!
-$ WRITE SYS$OUTPUT "Using VAXC 'C' Compiler."
-$!
-$! Compile Using VAXC.
-$!
-$ CC = "CC"
-$ IF ARCH.NES."VAX"
-$ THEN
-$ WRITE SYS$OUTPUT "There is no VAX C on Alpha!"
-$ EXIT
-$ ENDIF
-$ IF F$TRNLNM("DECC$CC_DEFAULT").EQS."/DECC" THEN CC = "CC/VAXC"
-$ CC = CC + "/''CC_OPTIMIZE'/''DEBUGGER'/NOLIST" + -
- "/INCLUDE=(SYS$DISK:[],SYS$DISK:[-],SYS$DISK:[.ENGINE.VENDOR_DEFNS])" + -
- CCEXTRAFLAGS
-$ CCDEFS = """VAXC""," + CCDEFS
-$!
-$! Define <sys> As SYS$COMMON:[SYSLIB]
-$!
-$ DEFINE/NOLOG SYS SYS$COMMON:[SYSLIB]
-$!
-$! Define The Linker Options File Name.
-$!
-$ OPT_FILE = "''EXE_DIR'VAX_VAXC_OPTIONS.OPT"
-$!
-$! End VAXC Check
-$!
-$ ENDIF
-$!
-$! Check To See If We Are To Use GNU C.
-$!
-$ IF (OPT_COMPILER.EQS."GNUC")
-$ THEN
-$!
-$! Looks Like GNUC, Set To Use GNUC.
-$!
-$ COMPILER = "GNUC"
-$!
-$! Tell The User We Are Using GNUC.
-$!
-$ WRITE SYS$OUTPUT "Using GNU 'C' Compiler."
-$!
-$! Use GNU C...
-$!
-$ CC = "GCC/NOCASE_HACK/''GCC_OPTIMIZE'/''DEBUGGER'/NOLIST" + -
- "/INCLUDE=(SYS$DISK:[],SYS$DISK:[-],SYS$DISK:[.ENGINE.VENDOR_DEFNS])" + -
- CCEXTRAFLAGS
-$!
-$! Define The Linker Options File Name.
-$!
-$ OPT_FILE = "''EXE_DIR'VAX_GNUC_OPTIONS.OPT"
-$!
-$! End The GNU C Check.
-$!
-$ ENDIF
-$!
-$! Set up default defines
-$!
-$ CCDEFS = """FLAT_INC=1""," + CCDEFS
-$!
-$! Finish up the definition of CC.
-$!
-$ IF COMPILER .EQS. "DECC"
-$ THEN
-$ IF CCDISABLEWARNINGS .NES. ""
-$ THEN
-$ CCDISABLEWARNINGS = "/WARNING=(DISABLE=(" + CCDISABLEWARNINGS + "))"
-$ ENDIF
-$ ELSE
-$ CCDISABLEWARNINGS = ""
-$ ENDIF
-$ CC = CC + "/DEFINE=(" + CCDEFS + ")" + CCDISABLEWARNINGS
-$!
-$! Show user the result
-$!
-$ WRITE/SYMBOL SYS$OUTPUT "Main C Compiling Command: ",CC
-$!
-$! Else The User Entered An Invalid Argument.
-$!
-$ ELSE
-$!
-$! Tell The User We Don't Know What They Want.
-$!
-$ WRITE SYS$OUTPUT ""
-$ WRITE SYS$OUTPUT "The Option ",OPT_COMPILER," Is Invalid. The Valid Options Are:"
-$ WRITE SYS$OUTPUT ""
-$ WRITE SYS$OUTPUT " VAXC : To Compile With VAX C."
-$ WRITE SYS$OUTPUT " DECC : To Compile With DEC C."
-$ WRITE SYS$OUTPUT " GNUC : To Compile With GNU C."
-$ WRITE SYS$OUTPUT ""
-$!
-$! Time To EXIT.
-$!
-$ EXIT
-$!
-$! End The Valid Argument Check.
-$!
-$ ENDIF
-$!
-$! Build a MACRO command for the architecture at hand
-$!
-$ IF ARCH .EQS. "VAX" THEN MACRO = "MACRO/''DEBUGGER'"
-$ IF ARCH .NES. "VAX" THEN MACRO = "MACRO/MIGRATION/''DEBUGGER'/''MACRO_OPTIMIZE'"
-$!
-$! Show user the result
-$!
-$ WRITE/SYMBOL SYS$OUTPUT "Main MACRO Compiling Command: ",MACRO
-$!
-$! Time to check the contents, and to make sure we get the correct library.
-$!
-$ IF OPT_TCPIP_LIB.EQS."SOCKETSHR" .OR. OPT_TCPIP_LIB.EQS."MULTINET" -
- .OR. OPT_TCPIP_LIB.EQS."UCX" .OR. OPT_TCPIP_LIB.EQS."TCPIP" -
- .OR. OPT_TCPIP_LIB.EQS."NONE"
-$ THEN
-$!
-$! Check to see if SOCKETSHR was chosen
-$!
-$ IF OPT_TCPIP_LIB.EQS."SOCKETSHR"
-$ THEN
-$!
-$! Set the library to use SOCKETSHR
-$!
-$ TCPIP_LIB = "SYS$DISK:[-.VMS]SOCKETSHR_SHR.OPT/OPT"
-$!
-$! Done with SOCKETSHR
-$!
-$ ENDIF
-$!
-$! Check to see if MULTINET was chosen
-$!
-$ IF OPT_TCPIP_LIB.EQS."MULTINET"
-$ THEN
-$!
-$! Set the library to use UCX emulation.
-$!
-$ OPT_TCPIP_LIB = "UCX"
-$!
-$! Done with MULTINET
-$!
-$ ENDIF
-$!
-$! Check to see if UCX was chosen
-$!
-$ IF OPT_TCPIP_LIB.EQS."UCX"
-$ THEN
-$!
-$! Set the library to use UCX.
-$!
-$ TCPIP_LIB = "SYS$DISK:[-.VMS]UCX_SHR_DECC.OPT/OPT"
-$ IF F$TRNLNM("UCX$IPC_SHR") .NES. ""
-$ THEN
-$ TCPIP_LIB = "SYS$DISK:[-.VMS]UCX_SHR_DECC_LOG.OPT/OPT"
-$ ELSE
-$ IF COMPILER .NES. "DECC" .AND. ARCH .EQS. "VAX" THEN -
- TCPIP_LIB = "SYS$DISK:[-.VMS]UCX_SHR_VAXC.OPT/OPT"
-$ ENDIF
-$!
-$! Done with UCX
-$!
-$ ENDIF
-$!
-$! Check to see if TCPIP was chosen
-$!
-$ IF OPT_TCPIP_LIB.EQS."TCPIP"
-$ THEN
-$!
-$! Set the library to use TCPIP (post UCX).
-$!
-$ TCPIP_LIB = "SYS$DISK:[-.VMS]TCPIP_SHR_DECC.OPT/OPT"
-$!
-$! Done with TCPIP
-$!
-$ ENDIF
-$!
-$! Check to see if NONE was chosen
-$!
-$ IF OPT_TCPIP_LIB.EQS."NONE"
-$ THEN
-$!
-$! Do not use a TCPIP library.
-$!
-$ TCPIP_LIB = ""
-$!
-$! Done with TCPIP
-$!
-$ ENDIF
-$!
-$! Print info
-$!
-$ WRITE SYS$OUTPUT "TCP/IP library spec: ", TCPIP_LIB
-$!
-$! Else The User Entered An Invalid Argument.
-$!
-$ ELSE
-$!
-$! Tell The User We Don't Know What They Want.
-$!
-$ WRITE SYS$OUTPUT ""
-$ WRITE SYS$OUTPUT "The Option ",OPT_TCPIP_LIB," Is Invalid. The Valid Options Are:"
-$ WRITE SYS$OUTPUT ""
-$ WRITE SYS$OUTPUT " SOCKETSHR : To link with SOCKETSHR TCP/IP library."
-$ WRITE SYS$OUTPUT " UCX : To link with UCX TCP/IP library."
-$ WRITE SYS$OUTPUT " TCPIP : To link with TCPIP (post UCX) TCP/IP library."
-$ WRITE SYS$OUTPUT ""
-$!
-$! Time To EXIT.
-$!
-$ EXIT
-$!
-$! Done with TCP/IP libraries
-$!
-$ ENDIF
-$!
-$! Time To RETURN...
-$!
-$ RETURN
-$!
-$ INITIALISE:
-$!
-$! Save old value of the logical name OPENSSL
-$!
-$ __SAVE_OPENSSL = F$TRNLNM("OPENSSL","LNM$PROCESS_TABLE")
-$!
-$! Save directory information
-$!
-$ __HERE = F$PARSE(F$PARSE("A.;",F$ENVIRONMENT("PROCEDURE"))-"A.;","[]A.;") - "A.;"
-$ __HERE = F$EDIT(__HERE,"UPCASE")
-$ __TOP = __HERE - "ENGINES]"
-$ __INCLUDE = __TOP + "INCLUDE.OPENSSL]"
-$!
-$! Set up the logical name OPENSSL to point at the include directory
-$!
-$ DEFINE OPENSSL/NOLOG '__INCLUDE'
-$!
-$! Done
-$!
-$ RETURN
-$!
-$ CLEANUP:
-$!
-$! Restore the logical name OPENSSL if it had a value
-$!
-$ IF __SAVE_OPENSSL .EQS. ""
-$ THEN
-$ DEASSIGN OPENSSL
-$ ELSE
-$ DEFINE/NOLOG OPENSSL '__SAVE_OPENSSL'
-$ ENDIF
-$!
-$! Done
-$!
-$ RETURN
+$!
+$! MAKEENGINES.COM
+$! Written By: Richard Levitte
+$! richard@levitte.org
+$!
+$! This command file compiles and creates the various engines in form
+$! of shared images. They are placed in [.xxx.EXE.ENGINES], where "xxx"
+$! is ALPHA, IA64 or VAX, depending on your hardware.
+$!
+$! P1 if this is ENGINES or ALL, the engines will build, otherwise not.
+$!
+$! P2 DEBUG or NODEBUG to compile with or without debugger information.
+$!
+$! P3 VAXC for VAX C
+$! DECC for DEC C
+$! GNUC for GNU C (untested)
+$!
+$! P4 if defined, sets the TCP/IP libraries to use. UCX or TCPIP is
+$! used by default since most other implementations come with a
+$! compatibility library. The value must be one of the following:
+$!
+$! UCX for UCX
+$! SOCKETSHR for SOCKETSHR+NETLIB
+$! TCPIP for TCPIP (post UCX)
+$!
+$! P5 if defined, tells the compiler not to use special threads.
+$!
+$! P6 if defined, denotes which engines to build. If not defined,
+$! all available engines are built.
+$!
+$! For 64 bit architectures (Alpha and IA64), specify the pointer size as P7.
+$! For 32 bit architectures (VAX), P7 is ignored.
+$! Currently supported values are:
+$!
+$! 32 To ge a library compiled with /POINTER_SIZE=32
+$! 64 To ge a library compiled with /POINTER_SIZE=64
+$!
+$!-----------------------------------------------------------------------------
+$!
+$! Set the default TCP/IP library to link against if needed
+$!
+$ TCPIP_LIB = ""
+$!
+$! Check What Architecture We Are Using.
+$!
+$ IF (F$GETSYI("CPU").LT.128)
+$ THEN
+$!
+$! The Architecture Is VAX.
+$!
+$ ARCH = "VAX"
+$!
+$! Else...
+$!
+$ ELSE
+$!
+$! The Architecture Is Alpha, IA64 or whatever comes in the future.
+$!
+$ ARCH = F$EDIT( F$GETSYI( "ARCH_NAME"), "UPCASE")
+$ IF (ARCH .EQS. "") THEN ARCH = "UNK"
+$!
+$! End The Architecture Check.
+$!
+$ ENDIF
+$!
+$! Set the names of the engines we want to build
+$! NOTE: Some might think this list ugly. However, it's made this way to
+$! reflect the LIBNAMES variable in Makefile as closely as possible,
+$! thereby making it fairly easy to verify that the lists are the same.
+$! NOTE: gmp isn't built, as it's mostly a test engine and brings in another
+$! library that isn't necessarely ported to VMS.
+$!
+$ ENGINES = "," + P6
+$ IF ENGINES .EQS. "," THEN -
+ ENGINES = ",4758cca,aep,atalla,cswift,chil,nuron,sureware,ubsec,padlock,"
+$!
+$! GOST requires a 64-bit integer type, unavailable on VAX.
+$!
+$ IF (ARCH .NES. "VAX") THEN -
+ ENGINES = ENGINES+ ",ccgost"
+$!
+$! Set the goal directories, and create them if necessary
+$!
+$ OBJ_DIR := SYS$DISK:[-.'ARCH'.OBJ.ENGINES]
+$ EXE_DIR := SYS$DISK:[-.'ARCH'.EXE.ENGINES]
+$ IF F$PARSE(OBJ_DIR) .EQS. "" THEN CREATE/DIRECTORY 'OBJ_DIR'
+$ IF F$PARSE(EXE_DIR) .EQS. "" THEN CREATE/DIRECTORY 'EXE_DIR'
+$!
+$! Set the goal files, and create them if necessary
+$!
+$ CRYPTO_LIB :=SYS$DISK:[-.'ARCH'.EXE.CRYPTO]LIBCRYPTO'LIB32'.OLB
+$ IF F$SEARCH(CRYPTO_LIB) .EQS. "" THEN LIBRARY/CREATE/OBJECT 'CRYPTO_LIB'
+$!
+$! OK, time to check options and initialise
+$!
+$ OPT_PHASE = P1
+$ ACCEPT_PHASE = "ALL,ENGINES"
+$ OPT_DEBUG = P2
+$ OPT_COMPILER = P3
+$ OPT_TCPIP_LIB = P4
+$ OPT_SPECIAL_THREADS = P5
+$ OPT_POINTER_SIZE = P7
+$
+$ GOSUB CHECK_OPTIONS
+$ GOSUB INITIALISE
+$ GOSUB CHECK_OPT_FILE
+$!
+$! Define what goes into each engine. VAX includes a transfer vector.
+$!
+$ ENGINE_ = ""
+$ TV_OBJ = ""
+$ IF ARCH .EQS. "VAX"
+$ THEN
+$ ENGINE_ = "engine_vector.mar"
+$ TV_OBJ_NAME = OBJ_DIR + F$PARSE(ENGINE_,,,"NAME","SYNTAX_ONLY") + ".OBJ"
+$ TV_OBJ = ",''TV_OBJ_NAME'"
+$ ENDIF
+$ ENGINE_4758CCA = "e_4758cca"
+$ ENGINE_aep = "e_aep"
+$ ENGINE_atalla = "e_atalla"
+$ ENGINE_cswift = "e_cswift"
+$ ENGINE_chil = "e_chil"
+$ ENGINE_nuron = "e_nuron"
+$ ENGINE_sureware = "e_sureware"
+$ ENGINE_ubsec = "e_ubsec"
+$ ENGINE_padlock = "e_padlock"
+$
+$ ENGINE_ccgost_SUBDIR = "ccgost"
+$ ENGINE_ccgost = "e_gost_err,gost2001_keyx,gost2001,gost89,gost94_keyx,"+ -
+ "gost_ameth,gost_asn1,gost_crypt,gost_ctl,gost_eng,"+ -
+ "gosthash,gost_keywrap,gost_md,gost_params,gost_pmeth,"+ -
+ "gost_sign"
+$!
+$! Define which programs need to be linked with a TCP/IP library
+$!
+$ TCPIP_ENGINES = ",,"
+$ IF COMPILER .EQS. "VAXC" THEN -
+ TCPIP_ENGINES = ",,"
+$!
+$! Set up two loops, one that keeps track of the engines,
+$! and one that keeps track of all the files going into
+$! the current engine.
+$!
+$! Here's the start of the engine loop.
+$!
+$ ENGINE_COUNTER = 0
+$ ENGINE_NEXT:
+$!
+$! Extract the current engine name, and if we've reached the end, stop
+$!
+$ ENGINE_NAME = F$ELEMENT(ENGINE_COUNTER,",",ENGINES)
+$ IF (ENGINE_NAME.EQS.",") THEN GOTO ENGINE_DONE
+$!
+$ ENGINE_COUNTER = ENGINE_COUNTER + 1
+$!
+$! Set up the engine library names.
+$!
+$ LIB_ENGINE = "ENGINE_" + ENGINE_NAME
+$!
+$! Check if the library module name actually is defined
+$!
+$ IF F$TYPE('LIB_ENGINE') .EQS. ""
+$ THEN
+$ WRITE SYS$ERROR ""
+$ WRITE SYS$ERROR "The module ",ENGINE_NAME," does not exist. Continuing..."
+$ WRITE SYS$ERROR ""
+$ GOTO ENGINE_NEXT
+$ ENDIF
+$!
+$! Talk to the user
+$!
+$ IF ENGINE_NAME .NES. ""
+$ THEN
+$ WRITE SYS$OUTPUT "Compiling The ",ENGINE_NAME," Library Files. (",BUILDALL,")"
+$ ELSE
+$ WRITE SYS$OUTPUT "Compiling Support Files. (",BUILDALL,")"
+$ ENDIF
+$!
+$! Create a .OPT file for the object files (for a real engine name).
+$!
+$ IF ENGINE_NAME .NES. ""
+$ THEN
+$ OPEN/WRITE OBJECTS 'EXE_DIR''ENGINE_NAME'.OPT
+$ ENDIF
+$!
+$! Here's the start of per-engine module loop.
+$!
+$ FILE_COUNTER = 0
+$ FILE_NEXT:
+$!
+$! Extract the file name from the file list, and if we've reached the end, stop
+$!
+$ FILE_NAME = F$ELEMENT(FILE_COUNTER,",",'LIB_ENGINE')
+$ IF (FILE_NAME.EQS.",") THEN GOTO FILE_DONE
+$!
+$ FILE_COUNTER = FILE_COUNTER + 1
+$!
+$ IF FILE_NAME .EQS. "" THEN GOTO FILE_NEXT
+$!
+$! Set up the source and object reference
+$!
+$ IF F$TYPE('LIB_ENGINE'_SUBDIR) .EQS. ""
+$ THEN
+$ SOURCE_FILE = F$PARSE(FILE_NAME,"SYS$DISK:[].C",,,"SYNTAX_ONLY")
+$ ELSE
+$ SOURCE_FILE = F$PARSE(FILE_NAME,"SYS$DISK:[."+'LIB_ENGINE'_SUBDIR+"].C",,,"SYNTAX_ONLY")
+$ ENDIF
+$ OBJECT_FILE = OBJ_DIR + F$PARSE(FILE_NAME,,,"NAME","SYNTAX_ONLY") + ".OBJ"
+$!
+$! If we get some problem, we just go on trying to build the next module.
+$ ON WARNING THEN GOTO FILE_NEXT
+$!
+$! Check if the module we want to compile is actually there.
+$!
+$ IF F$SEARCH(SOURCE_FILE) .EQS. ""
+$ THEN
+$ WRITE SYS$OUTPUT ""
+$ WRITE SYS$OUTPUT "The File ",SOURCE_FILE," Doesn't Exist."
+$ WRITE SYS$OUTPUT ""
+$ GOTO EXIT
+$ ENDIF
+$!
+$! Talk to the user.
+$!
+$ WRITE SYS$OUTPUT " ",FILE_NAME,""
+$!
+$! Do the dirty work.
+$!
+$ ON ERROR THEN GOTO FILE_NEXT
+$ IF F$EDIT(F$PARSE(SOURCE_FILE,,,"TYPE","SYNTAX_ONLY"),"UPCASE") .EQS. ".MAR"
+$ THEN
+$ MACRO/OBJECT='OBJECT_FILE' 'SOURCE_FILE'
+$ ELSE
+$ CC/OBJECT='OBJECT_FILE' 'SOURCE_FILE'
+$ ENDIF
+$!
+$! Write the entry to the .OPT file (for a real engine name).
+$!
+$ IF ENGINE_NAME .NES. ""
+$ THEN
+$ WRITE OBJECTS OBJECT_FILE
+$ ENDIF
+$!
+$! Next file
+$!
+$ GOTO FILE_NEXT
+$!
+$ FILE_DONE:
+$!
+$! Do not link the support files.
+$!
+$ IF ENGINE_NAME .EQS. "" THEN GOTO ENGINE_NEXT
+$!
+$! Close the linker options file (for a real engine name).
+$!
+$ CLOSE OBJECTS
+$!
+$! Now, there are two ways to handle this. We can either build
+$! shareable images or stick the engine object file into libcrypto.
+$! For now, the latter is NOT supported.
+$!
+$!!!!! LIBRARY/REPLACE 'CRYPTO_LIB' 'OBJECT_FILE'
+$!
+$! For shareable libraries, we need to do things a little differently
+$! depending on if we link with a TCP/IP library or not.
+$!
+$ ENGINE_OPT := SYS$DISK:[]'ARCH'.OPT
+$ IF TCPIP_LIB .NES. ""
+$ THEN
+$ LINK/'DEBUGGER'/'TRACEBACK' /SHARE='EXE_DIR''ENGINE_NAME'.EXE -
+ 'EXE_DIR''ENGINE_NAME'.OPT/OPTION'TV_OBJ', -
+ 'CRYPTO_LIB'/LIBRARY, -
+ 'ENGINE_OPT'/OPTION,'TCPIP_LIB','OPT_FILE'/OPTION
+$ ELSE
+$ LINK/'DEBUGGER'/'TRACEBACK' /SHARE='EXE_DIR''ENGINE_NAME'.EXE -
+ 'EXE_DIR''ENGINE_NAME'.OPT/OPTION'TV_OBJ', -
+ 'CRYPTO_LIB'/LIBRARY, -
+ 'ENGINE_OPT'/OPTION,'OPT_FILE'/OPTION
+$ ENDIF
+$!
+$! Next engine
+$!
+$ GOTO ENGINE_NEXT
+$!
+$ ENGINE_DONE:
+$!
+$! Talk to the user
+$!
+$ WRITE SYS$OUTPUT "All Done..."
+$ EXIT:
+$ GOSUB CLEANUP
+$ EXIT
+$!
+$! Check For The Link Option FIle.
+$!
+$ CHECK_OPT_FILE:
+$!
+$! Check To See If We Need To Make A VAX C Option File.
+$!
+$ IF (COMPILER.EQS."VAXC")
+$ THEN
+$!
+$! Check To See If We Already Have A VAX C Linker Option File.
+$!
+$ IF (F$SEARCH(OPT_FILE).EQS."")
+$ THEN
+$!
+$! We Need A VAX C Linker Option File.
+$!
+$ CREATE 'OPT_FILE'
+$DECK
+!
+! Default System Options File To Link Agianst
+! The Sharable VAX C Runtime Library.
+!
+SYS$SHARE:VAXCRTL.EXE/SHARE
+$EOD
+$!
+$! End The Option File Check.
+$!
+$ ENDIF
+$!
+$! End The VAXC Check.
+$!
+$ ENDIF
+$!
+$! Check To See If We Need A GNU C Option File.
+$!
+$ IF (COMPILER.EQS."GNUC")
+$ THEN
+$!
+$! Check To See If We Already Have A GNU C Linker Option File.
+$!
+$ IF (F$SEARCH(OPT_FILE).EQS."")
+$ THEN
+$!
+$! We Need A GNU C Linker Option File.
+$!
+$ CREATE 'OPT_FILE'
+$DECK
+!
+! Default System Options File To Link Agianst
+! The Sharable C Runtime Library.
+!
+GNU_CC:[000000]GCCLIB/LIBRARY
+SYS$SHARE:VAXCRTL/SHARE
+$EOD
+$!
+$! End The Option File Check.
+$!
+$ ENDIF
+$!
+$! End The GNU C Check.
+$!
+$ ENDIF
+$!
+$! Check To See If We Need A DEC C Option File.
+$!
+$ IF (COMPILER.EQS."DECC")
+$ THEN
+$!
+$! Check To See If We Already Have A DEC C Linker Option File.
+$!
+$ IF (F$SEARCH(OPT_FILE).EQS."")
+$ THEN
+$!
+$! Figure Out If We Need A non-VAX Or A VAX Linker Option File.
+$!
+$ IF ARCH .EQS. "VAX"
+$ THEN
+$!
+$! We Need A DEC C Linker Option File For VAX.
+$!
+$ CREATE 'OPT_FILE'
+$DECK
+!
+! Default System Options File To Link Agianst
+! The Sharable DEC C Runtime Library.
+!
+SYS$SHARE:DECC$SHR.EXE/SHARE
+$EOD
+$!
+$! Else...
+$!
+$ ELSE
+$!
+$! Create The non-VAX Linker Option File.
+$!
+$ CREATE 'OPT_FILE'
+$DECK
+!
+! Default System Options File For non-VAX To Link Agianst
+! The Sharable C Runtime Library.
+!
+SYS$SHARE:CMA$OPEN_LIB_SHR/SHARE
+SYS$SHARE:CMA$OPEN_RTL/SHARE
+$EOD
+$!
+$! End The DEC C Option File Check.
+$!
+$ ENDIF
+$!
+$! End The Option File Search.
+$!
+$ ENDIF
+$!
+$! End The DEC C Check.
+$!
+$ ENDIF
+$!
+$! Tell The User What Linker Option File We Are Using.
+$!
+$ WRITE SYS$OUTPUT "Using Linker Option File ",OPT_FILE,"."
+$!
+$! Time To RETURN.
+$!
+$ RETURN
+$!
+$! Check The User's Options.
+$!
+$ CHECK_OPTIONS:
+$!
+$! Check To See If OPT_PHASE Is Blank.
+$!
+$ IF (OPT_PHASE.EQS."ALL")
+$ THEN
+$!
+$! OPT_PHASE Is Blank, So Build Everything.
+$!
+$ BUILDALL = "ALL"
+$!
+$! Else...
+$!
+$ ELSE
+$!
+$! Else, Check To See If OPT_PHASE Has A Valid Argument.
+$!
+$ IF ("," + ACCEPT_PHASE + ",") - ("," + OPT_PHASE + ",") -
+ .NES. ("," + ACCEPT_PHASE + ",")
+$ THEN
+$!
+$! A Valid Argument.
+$!
+$ BUILDALL = OPT_PHASE
+$!
+$! Else...
+$!
+$ ELSE
+$!
+$! Tell The User We Don't Know What They Want.
+$!
+$ WRITE SYS$OUTPUT ""
+$ WRITE SYS$OUTPUT "The option ",OPT_PHASE," is invalid. The valid options are:"
+$ WRITE SYS$OUTPUT ""
+$ IF ("," + ACCEPT_PHASE + ",") - ",ALL," -
+ .NES. ("," + ACCEPT_PHASE + ",") THEN -
+ WRITE SYS$OUTPUT " ALL : just build everything."
+$ IF ("," + ACCEPT_PHASE + ",") - ",ENGINES," -
+ .NES. ("," + ACCEPT_PHASE + ",") THEN -
+ WRITE SYS$OUTPUT " ENGINES : to compile just the [.xxx.EXE.ENGINES]*.EXE hareable images."
+$ WRITE SYS$OUTPUT ""
+$ WRITE SYS$OUTPUT " where 'xxx' stands for:"
+$ WRITE SYS$OUTPUT ""
+$ WRITE SYS$OUTPUT " ALPHA : Alpha architecture."
+$ WRITE SYS$OUTPUT " IA64 : IA64 architecture."
+$ WRITE SYS$OUTPUT " VAX : VAX architecture."
+$ WRITE SYS$OUTPUT ""
+$!
+$! Time To EXIT.
+$!
+$ EXIT
+$!
+$! End The Valid Argument Check.
+$!
+$ ENDIF
+$!
+$! End The OPT_PHASE Check.
+$!
+$ ENDIF
+$!
+$! Check To See If OPT_DEBUG Is Blank.
+$!
+$ IF (OPT_DEBUG.EQS."NODEBUG")
+$ THEN
+$!
+$! OPT_DEBUG Is NODEBUG, So Compile Without The Debugger Information.
+$!
+$ DEBUGGER = "NODEBUG"
+$ TRACEBACK = "NOTRACEBACK"
+$ GCC_OPTIMIZE = "OPTIMIZE"
+$ CC_OPTIMIZE = "OPTIMIZE"
+$ MACRO_OPTIMIZE = "OPTIMIZE"
+$ WRITE SYS$OUTPUT "No Debugger Information Will Be Produced During Compile."
+$ WRITE SYS$OUTPUT "Compiling With Compiler Optimization."
+$ ELSE
+$!
+$! Check To See If We Are To Compile With Debugger Information.
+$!
+$ IF (OPT_DEBUG.EQS."DEBUG")
+$ THEN
+$!
+$! Compile With Debugger Information.
+$!
+$ DEBUGGER = "DEBUG"
+$ TRACEBACK = "TRACEBACK"
+$ GCC_OPTIMIZE = "NOOPTIMIZE"
+$ CC_OPTIMIZE = "NOOPTIMIZE"
+$ MACRO_OPTIMIZE = "NOOPTIMIZE"
+$ WRITE SYS$OUTPUT "Debugger Information Will Be Produced During Compile."
+$ WRITE SYS$OUTPUT "Compiling Without Compiler Optimization."
+$ ELSE
+$!
+$! They Entered An Invalid Option..
+$!
+$ WRITE SYS$OUTPUT ""
+$ WRITE SYS$OUTPUT "The Option ",OPT_DEBUG," Is Invalid. The Valid Options Are:"
+$ WRITE SYS$OUTPUT ""
+$ WRITE SYS$OUTPUT " DEBUG : Compile With The Debugger Information."
+$ WRITE SYS$OUTPUT " NODEBUG : Compile Without The Debugger Information."
+$ WRITE SYS$OUTPUT ""
+$!
+$! Time To EXIT.
+$!
+$ EXIT
+$!
+$! End The Valid Argument Check.
+$!
+$ ENDIF
+$!
+$! End The OPT_DEBUG Check.
+$!
+$ ENDIF
+$!
+$! Special Threads For OpenVMS v7.1 Or Later
+$!
+$! Written By: Richard Levitte
+$! richard@levitte.org
+$!
+$!
+$! Check To See If We Have A Option For OPT_SPECIAL_THREADS.
+$!
+$ IF (OPT_SPECIAL_THREADS.EQS."")
+$ THEN
+$!
+$! Get The Version Of VMS We Are Using.
+$!
+$ ISSEVEN :=
+$ TMP = F$ELEMENT(0,"-",F$EXTRACT(1,4,F$GETSYI("VERSION")))
+$ TMP = F$INTEGER(F$ELEMENT(0,".",TMP)+F$ELEMENT(1,".",TMP))
+$!
+$! Check To See If The VMS Version Is v7.1 Or Later.
+$!
+$ IF (TMP.GE.71)
+$ THEN
+$!
+$! We Have OpenVMS v7.1 Or Later, So Use The Special Threads.
+$!
+$ ISSEVEN := ,PTHREAD_USE_D4
+$!
+$! End The VMS Version Check.
+$!
+$ ENDIF
+$!
+$! End The OPT_SPECIAL_THREADS Check.
+$!
+$ ENDIF
+$!
+$! Check To See If OPT_POINTER_SIZE Is Blank.
+$!
+$ IF (OPT_POINTER_SIZE.EQS."")
+$ THEN
+$ POINTER_SIZE = ""
+$ ELSE
+$!
+$! Check is OPT_POINTER_SIZE Is Valid
+$!
+$ IF (OPT_POINTER_SIZE.EQS."32")
+$ THEN
+$ POINTER_SIZE = "/POINTER_SIZE=32"
+$ IF ARCH .EQS. "VAX"
+$ THEN
+$ LIB32 = ""
+$ ELSE
+$ LIB32 = "32"
+$ ENDIF
+$ ELSE
+$ IF (OPT_POINTER_SIZE.EQS."64")
+$ THEN
+$ LIB32 = ""
+$ IF ARCH .EQS. "VAX"
+$ THEN
+$ POINTER_SIZE = "/POINTER_SIZE=32"
+$ ELSE
+$ POINTER_SIZE = "/POINTER_SIZE=64"
+$ ENDIF
+$ ELSE
+$!
+$! Tell The User Entered An Invalid Option..
+$!
+$ WRITE SYS$OUTPUT ""
+$ WRITE SYS$OUTPUT "The Option ",OPT_POINTER_SIZE," Is Invalid. The Valid Options Are:"
+$ WRITE SYS$OUTPUT ""
+$ WRITE SYS$OUTPUT " 32 : Compile with 32 bit pointer size"
+$ WRITE SYS$OUTPUT " 64 : Compile with 64 bit pointer size"
+$ WRITE SYS$OUTPUT ""
+$!
+$! Time To EXIT.
+$!
+$ GOTO TIDY
+$!
+$! End The Valid Arguement Check.
+$!
+$ ENDIF
+$ ENDIF
+$!
+$! End The OPT_POINTER_SIZE Check.
+$!
+$ ENDIF
+$!
+$! Check To See If OPT_COMPILER Is Blank.
+$!
+$ IF (OPT_COMPILER.EQS."")
+$ THEN
+$!
+$! O.K., The User Didn't Specify A Compiler, Let's Try To
+$! Find Out Which One To Use.
+$!
+$! Check To See If We Have GNU C.
+$!
+$ IF (F$TRNLNM("GNU_CC").NES."")
+$ THEN
+$!
+$! Looks Like GNUC, Set To Use GNUC.
+$!
+$ OPT_COMPILER = "GNUC"
+$!
+$! Else...
+$!
+$ ELSE
+$!
+$! Check To See If We Have VAXC Or DECC.
+$!
+$ IF (ARCH.NES."VAX").OR.(F$TRNLNM("DECC$CC_DEFAULT").NES."")
+$ THEN
+$!
+$! Looks Like DECC, Set To Use DECC.
+$!
+$ OPT_COMPILER = "DECC"
+$!
+$! Else...
+$!
+$ ELSE
+$!
+$! Looks Like VAXC, Set To Use VAXC.
+$!
+$ OPT_COMPILER = "VAXC"
+$!
+$! End The VAXC Compiler Check.
+$!
+$ ENDIF
+$!
+$! End The DECC & VAXC Compiler Check.
+$!
+$ ENDIF
+$!
+$! End The Compiler Check.
+$!
+$ ENDIF
+$!
+$! Check To See If We Have A Option For OPT_TCPIP_LIB.
+$!
+$ IF (OPT_TCPIP_LIB.EQS."")
+$ THEN
+$!
+$! Find out what socket library we have available
+$!
+$ IF F$PARSE("SOCKETSHR:") .NES. ""
+$ THEN
+$!
+$! We have SOCKETSHR, and it is my opinion that it's the best to use.
+$!
+$ OPT_TCPIP_LIB = "SOCKETSHR"
+$!
+$! Tell the user
+$!
+$ WRITE SYS$OUTPUT "Using SOCKETSHR for TCP/IP"
+$!
+$! Else, let's look for something else
+$!
+$ ELSE
+$!
+$! Like UCX (the reason to do this before Multinet is that the UCX
+$! emulation is easier to use...)
+$!
+$ IF F$TRNLNM("UCX$IPC_SHR") .NES. "" -
+ .OR. F$PARSE("SYS$SHARE:UCX$IPC_SHR.EXE") .NES. "" -
+ .OR. F$PARSE("SYS$LIBRARY:UCX$IPC.OLB") .NES. ""
+$ THEN
+$!
+$! Last resort: a UCX or UCX-compatible library
+$!
+$ OPT_TCPIP_LIB = "UCX"
+$!
+$! Tell the user
+$!
+$ WRITE SYS$OUTPUT "Using UCX or an emulation thereof for TCP/IP"
+$!
+$! That was all...
+$!
+$ ENDIF
+$ ENDIF
+$ ENDIF
+$!
+$! Set Up Initial CC Definitions, Possibly With User Ones
+$!
+$ CCDEFS = "TCPIP_TYPE_''OPT_TCPIP_LIB',DSO_VMS"
+$ IF F$TYPE(USER_CCDEFS) .NES. "" THEN CCDEFS = CCDEFS + "," + USER_CCDEFS
+$ CCEXTRAFLAGS = ""
+$ IF F$TYPE(USER_CCFLAGS) .NES. "" THEN CCEXTRAFLAGS = USER_CCFLAGS
+$ CCDISABLEWARNINGS = "LONGLONGTYPE,LONGLONGSUFX"
+$ IF F$TYPE(USER_CCDISABLEWARNINGS) .NES. "" THEN -
+ CCDISABLEWARNINGS = CCDISABLEWARNINGS + "," + USER_CCDISABLEWARNINGS
+$!
+$! Check To See If The User Entered A Valid Paramter.
+$!
+$ IF (OPT_COMPILER.EQS."VAXC").OR.(OPT_COMPILER.EQS."DECC").OR.(OPT_COMPILER.EQS."GNUC")
+$ THEN
+$!
+$! Check To See If The User Wanted DECC.
+$!
+$ IF (OPT_COMPILER.EQS."DECC")
+$ THEN
+$!
+$! Looks Like DECC, Set To Use DECC.
+$!
+$ COMPILER = "DECC"
+$!
+$! Tell The User We Are Using DECC.
+$!
+$ WRITE SYS$OUTPUT "Using DECC 'C' Compiler."
+$!
+$! Use DECC...
+$!
+$ CC = "CC"
+$ IF ARCH.EQS."VAX" .AND. F$TRNLNM("DECC$CC_DEFAULT").NES."/DECC" -
+ THEN CC = "CC/DECC"
+$ CC = CC + "/''CC_OPTIMIZE'/''DEBUGGER'/STANDARD=ANSI89''POINTER_SIZE'" + -
+ "/NOLIST/PREFIX=ALL" + -
+ "/INCLUDE=(SYS$DISK:[],SYS$DISK:[.VENDOR_DEFNS])" + -
+ CCEXTRAFLAGS
+$!
+$! Define The Linker Options File Name.
+$!
+$ OPT_FILE = "''EXE_DIR'VAX_DECC_OPTIONS.OPT"
+$!
+$! End DECC Check.
+$!
+$ ENDIF
+$!
+$! Check To See If We Are To Use VAXC.
+$!
+$ IF (OPT_COMPILER.EQS."VAXC")
+$ THEN
+$!
+$! Looks Like VAXC, Set To Use VAXC.
+$!
+$ COMPILER = "VAXC"
+$!
+$! Tell The User We Are Using VAX C.
+$!
+$ WRITE SYS$OUTPUT "Using VAXC 'C' Compiler."
+$!
+$! Compile Using VAXC.
+$!
+$ CC = "CC"
+$ IF ARCH.NES."VAX"
+$ THEN
+$ WRITE SYS$OUTPUT "There is no VAX C on Alpha!"
+$ EXIT
+$ ENDIF
+$ IF F$TRNLNM("DECC$CC_DEFAULT").EQS."/DECC" THEN CC = "CC/VAXC"
+$ CC = CC + "/''CC_OPTIMIZE'/''DEBUGGER'/NOLIST" + -
+ "/INCLUDE=(SYS$DISK:[],SYS$DISK:[-],SYS$DISK:[.VENDOR_DEFNS])" + -
+ CCEXTRAFLAGS
+$ CCDEFS = """VAXC""," + CCDEFS
+$!
+$! Define <sys> As SYS$COMMON:[SYSLIB]
+$!
+$ DEFINE/NOLOG SYS SYS$COMMON:[SYSLIB]
+$!
+$! Define The Linker Options File Name.
+$!
+$ OPT_FILE = "''EXE_DIR'VAX_VAXC_OPTIONS.OPT"
+$!
+$! End VAXC Check
+$!
+$ ENDIF
+$!
+$! Check To See If We Are To Use GNU C.
+$!
+$ IF (OPT_COMPILER.EQS."GNUC")
+$ THEN
+$!
+$! Looks Like GNUC, Set To Use GNUC.
+$!
+$ COMPILER = "GNUC"
+$!
+$! Tell The User We Are Using GNUC.
+$!
+$ WRITE SYS$OUTPUT "Using GNU 'C' Compiler."
+$!
+$! Use GNU C...
+$!
+$ CC = "GCC/NOCASE_HACK/''GCC_OPTIMIZE'/''DEBUGGER'/NOLIST" + -
+ "/INCLUDE=(SYS$DISK:[],SYS$DISK:[-],SYS$DISK:[.VENDOR_DEFNS])" + -
+ CCEXTRAFLAGS
+$!
+$! Define The Linker Options File Name.
+$!
+$ OPT_FILE = "''EXE_DIR'VAX_GNUC_OPTIONS.OPT"
+$!
+$! End The GNU C Check.
+$!
+$ ENDIF
+$!
+$! Set up default defines
+$!
+$ CCDEFS = """FLAT_INC=1""," + CCDEFS
+$!
+$! Finish up the definition of CC.
+$!
+$ IF COMPILER .EQS. "DECC"
+$ THEN
+$ IF CCDISABLEWARNINGS .NES. ""
+$ THEN
+$ CCDISABLEWARNINGS = "/WARNING=(DISABLE=(" + CCDISABLEWARNINGS + "))"
+$ ENDIF
+$ ELSE
+$ CCDISABLEWARNINGS = ""
+$ ENDIF
+$ CC = CC + "/DEFINE=(" + CCDEFS + ")" + CCDISABLEWARNINGS
+$!
+$! Show user the result
+$!
+$ WRITE/SYMBOL SYS$OUTPUT "Main C Compiling Command: ",CC
+$!
+$! Else The User Entered An Invalid Argument.
+$!
+$ ELSE
+$!
+$! Tell The User We Don't Know What They Want.
+$!
+$ WRITE SYS$OUTPUT ""
+$ WRITE SYS$OUTPUT "The Option ",OPT_COMPILER," Is Invalid. The Valid Options Are:"
+$ WRITE SYS$OUTPUT ""
+$ WRITE SYS$OUTPUT " VAXC : To Compile With VAX C."
+$ WRITE SYS$OUTPUT " DECC : To Compile With DEC C."
+$ WRITE SYS$OUTPUT " GNUC : To Compile With GNU C."
+$ WRITE SYS$OUTPUT ""
+$!
+$! Time To EXIT.
+$!
+$ EXIT
+$!
+$! End The Valid Argument Check.
+$!
+$ ENDIF
+$!
+$! Build a MACRO command for the architecture at hand
+$!
+$ IF ARCH .EQS. "VAX" THEN MACRO = "MACRO/''DEBUGGER'"
+$ IF ARCH .NES. "VAX" THEN MACRO = "MACRO/MIGRATION/''DEBUGGER'/''MACRO_OPTIMIZE'"
+$!
+$! Show user the result
+$!
+$ WRITE/SYMBOL SYS$OUTPUT "Main MACRO Compiling Command: ",MACRO
+$!
+$! Time to check the contents, and to make sure we get the correct library.
+$!
+$ IF OPT_TCPIP_LIB.EQS."SOCKETSHR" .OR. OPT_TCPIP_LIB.EQS."MULTINET" -
+ .OR. OPT_TCPIP_LIB.EQS."UCX" .OR. OPT_TCPIP_LIB.EQS."TCPIP" -
+ .OR. OPT_TCPIP_LIB.EQS."NONE"
+$ THEN
+$!
+$! Check to see if SOCKETSHR was chosen
+$!
+$ IF OPT_TCPIP_LIB.EQS."SOCKETSHR"
+$ THEN
+$!
+$! Set the library to use SOCKETSHR
+$!
+$ TCPIP_LIB = "SYS$DISK:[-.VMS]SOCKETSHR_SHR.OPT/OPT"
+$!
+$! Done with SOCKETSHR
+$!
+$ ENDIF
+$!
+$! Check to see if MULTINET was chosen
+$!
+$ IF OPT_TCPIP_LIB.EQS."MULTINET"
+$ THEN
+$!
+$! Set the library to use UCX emulation.
+$!
+$ OPT_TCPIP_LIB = "UCX"
+$!
+$! Done with MULTINET
+$!
+$ ENDIF
+$!
+$! Check to see if UCX was chosen
+$!
+$ IF OPT_TCPIP_LIB.EQS."UCX"
+$ THEN
+$!
+$! Set the library to use UCX.
+$!
+$ TCPIP_LIB = "SYS$DISK:[-.VMS]UCX_SHR_DECC.OPT/OPT"
+$ IF F$TRNLNM("UCX$IPC_SHR") .NES. ""
+$ THEN
+$ TCPIP_LIB = "SYS$DISK:[-.VMS]UCX_SHR_DECC_LOG.OPT/OPT"
+$ ELSE
+$ IF COMPILER .NES. "DECC" .AND. ARCH .EQS. "VAX" THEN -
+ TCPIP_LIB = "SYS$DISK:[-.VMS]UCX_SHR_VAXC.OPT/OPT"
+$ ENDIF
+$!
+$! Done with UCX
+$!
+$ ENDIF
+$!
+$! Check to see if TCPIP was chosen
+$!
+$ IF OPT_TCPIP_LIB.EQS."TCPIP"
+$ THEN
+$!
+$! Set the library to use TCPIP (post UCX).
+$!
+$ TCPIP_LIB = "SYS$DISK:[-.VMS]TCPIP_SHR_DECC.OPT/OPT"
+$!
+$! Done with TCPIP
+$!
+$ ENDIF
+$!
+$! Check to see if NONE was chosen
+$!
+$ IF OPT_TCPIP_LIB.EQS."NONE"
+$ THEN
+$!
+$! Do not use a TCPIP library.
+$!
+$ TCPIP_LIB = ""
+$!
+$! Done with TCPIP
+$!
+$ ENDIF
+$!
+$! Print info
+$!
+$ WRITE SYS$OUTPUT "TCP/IP library spec: ", TCPIP_LIB
+$!
+$! Else The User Entered An Invalid Argument.
+$!
+$ ELSE
+$!
+$! Tell The User We Don't Know What They Want.
+$!
+$ WRITE SYS$OUTPUT ""
+$ WRITE SYS$OUTPUT "The Option ",OPT_TCPIP_LIB," Is Invalid. The Valid Options Are:"
+$ WRITE SYS$OUTPUT ""
+$ WRITE SYS$OUTPUT " SOCKETSHR : To link with SOCKETSHR TCP/IP library."
+$ WRITE SYS$OUTPUT " UCX : To link with UCX TCP/IP library."
+$ WRITE SYS$OUTPUT " TCPIP : To link with TCPIP (post UCX) TCP/IP library."
+$ WRITE SYS$OUTPUT ""
+$!
+$! Time To EXIT.
+$!
+$ EXIT
+$!
+$! Done with TCP/IP libraries
+$!
+$ ENDIF
+$!
+$! Time To RETURN...
+$!
+$ RETURN
+$!
+$ INITIALISE:
+$!
+$! Save old value of the logical name OPENSSL
+$!
+$ __SAVE_OPENSSL = F$TRNLNM("OPENSSL","LNM$PROCESS_TABLE")
+$!
+$! Save directory information
+$!
+$ __HERE = F$PARSE(F$PARSE("A.;",F$ENVIRONMENT("PROCEDURE"))-"A.;","[]A.;") - "A.;"
+$ __HERE = F$EDIT(__HERE,"UPCASE")
+$ __TOP = __HERE - "ENGINES]"
+$ __INCLUDE = __TOP + "INCLUDE.OPENSSL]"
+$!
+$! Set up the logical name OPENSSL to point at the include directory
+$!
+$ DEFINE OPENSSL/NOLOG '__INCLUDE'
+$!
+$! Done
+$!
+$ RETURN
+$!
+$ CLEANUP:
+$!
+$! Restore the logical name OPENSSL if it had a value
+$!
+$ IF __SAVE_OPENSSL .EQS. ""
+$ THEN
+$ DEASSIGN OPENSSL
+$ ELSE
+$ DEFINE/NOLOG OPENSSL '__SAVE_OPENSSL'
+$ ENDIF
+$!
+$! Done
+$!
+$ RETURN
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-10 08:47:46 +0000