diff options
Diffstat (limited to 'openssl/fips/fips-lib.com')
| -rw-r--r-- | openssl/fips/fips-lib.com | 1196 |
1 files changed, 0 insertions, 1196 deletions
diff --git a/openssl/fips/fips-lib.com b/openssl/fips/fips-lib.com deleted file mode 100644 index 539117b2e..000000000 --- a/openssl/fips/fips-lib.com +++ /dev/null @@ -1,1196 +0,0 @@ -$! -$! FIPS-LIB.COM -$! Written By: Robert Byer -$! Vice-President -$! A-Com Computing, Inc. -$! byer@mail.all-net.net -$! -$! Changes by Richard Levitte <richard@levitte.org> -$! -$! This command files compiles and creates the FIPS parts of the -$! "[.xxx.EXE.CRYPTO]LIBCRYPTO.OLB" library for OpenSSL. The "xxx" -$! denotes the machine architecture of AXP or VAX. -$! -$! It was re-written so it would try to determine what "C" compiler to use -$! or you can specify which "C" compiler to use. -$! -$! Specify the following as P1 to build just that part or ALL to just -$! build everything. -$! -$! LIBRARY To just compile the [.xxx.EXE.CRYPTO]LIBCRYPTO.OLB Library. -$! APPS To just compile the [.xxx.EXE.CRYPTO]*.EXE -$! ALL To do both LIBRARY and APPS -$! -$! Specify DEBUG or NODEBUG as P2 to compile with or without debugger -$! information. -$! -$! Specify which compiler at P3 to try to compile under. -$! -$! VAXC For VAX C. -$! DECC For DEC C. -$! GNUC For GNU C. -$! -$! If you don't speficy a compiler, it will try to determine which -$! "C" compiler to use. -$! -$! P4, if defined, sets a TCP/IP library to use, through one of the following -$! keywords: -$! -$! UCX for UCX -$! TCPIP for TCPIP (post UCX) -$! SOCKETSHR for SOCKETSHR+NETLIB -$! -$! P5, if defined, sets a compiler thread NOT needed on OpenVMS 7.1 (and up) -$! -$! P6, if defined, sets a choice of crypto methods to compile. -$! WARNING: this should only be done to recompile some part of an already -$! fully compiled library. -$! -$! -$! Define A TCP/IP Library That We Will Need To Link To. -$! (That Is, If We Need To Link To One.) -$! -$ TCPIP_LIB = "" -$! -$! Check Which Architecture We Are Using. -$! -$ IF (F$GETSYI("CPU").GE.128) -$ THEN -$! -$! The Architecture Is AXP -$! -$ ARCH := AXP -$! -$! Else... -$! -$ ELSE -$! -$! The Architecture Is VAX. -$! -$ ARCH := VAX -$! -$! End The Architecture Check. -$! -$ ENDIF -$! -$! Define The Different Encryption Types. -$! -$ ENCRYPT_TYPES = "Basic,SHA,RAND,DES,AES,DSA,RSA,DH,HMAC" -$! -$! Check To Make Sure We Have Valid Command Line Parameters. -$! -$ GOSUB CHECK_OPTIONS -$! -$! Initialise logical names and such -$! -$ GOSUB INITIALISE -$! -$! Tell The User What Kind of Machine We Run On. -$! -$ WRITE SYS$OUTPUT "Compiling On A ",ARCH," Machine." -$! -$! Define The OBJ Directory. -$! -$ OBJ_DIR := SYS$DISK:[-.'ARCH'.OBJ.CRYPTO] -$! -$! Check To See If The Architecture Specific OBJ Directory Exists. -$! -$ IF (F$PARSE(OBJ_DIR).EQS."") -$ THEN -$! -$! It Dosen't Exist, So Create It. -$! -$ CREATE/DIR 'OBJ_DIR' -$! -$! End The Architecture Specific OBJ Directory Check. -$! -$ ENDIF -$! -$! Define The EXE Directory. -$! -$ EXE_DIR := SYS$DISK:[-.'ARCH'.EXE.CRYPTO] -$! -$! Check To See If The Architecture Specific Directory Exists. -$! -$ IF (F$PARSE(EXE_DIR).EQS."") -$ THEN -$! -$! It Dosen't Exist, So Create It. -$! -$ CREATE/DIRECTORY 'EXE_DIR' -$! -$! End The Architecture Specific Directory Check. -$! -$ ENDIF -$! -$! Define The Library Name. -$! -$ LIB_NAME := 'EXE_DIR'LIBCRYPTO.OLB -$! -$! Define The CRYPTO-LIB We Are To Use. -$! -$ CRYPTO_LIB := 'EXE_DIR'LIBCRYPTO.OLB -$! -$! Check To See If We Already Have A "[.xxx.EXE.CRYPTO]LIBCRYPTO.OLB" Library... -$! -$ IF (F$SEARCH(LIB_NAME).EQS."") -$ THEN -$! -$! Guess Not, Create The Library. -$! -$ LIBRARY/CREATE/OBJECT 'LIB_NAME' -$! -$! End The Library Check. -$! -$ ENDIF -$! -$! Build our options file for the application -$! -$ GOSUB CHECK_OPT_FILE -$! -$! Define The Different Encryption "library" Strings. -$! -$ LIB_ = "fips,fips_err_wrapper" -$ LIB_SHA = "fips_sha1dgst,fips_sha1_selftest,fips_sha256,fips_sha512" -$ LIB_RAND = "fips_rand,fips_rand_selftest" -$ LIB_DES = "fips_des_enc,fips_des_selftest,fips_set_key" -$ LIB_AES = "fips_aes_core,fips_aes_selftest" -$ LIB_DSA = "fips_dsa_ossl,fips_dsa_gen,fips_dsa_selftest" -$ LIB_RSA = "fips_rsa_eay,fips_rsa_gen,fips_rsa_selftest,fips_rsa_x931g" -$ LIB_DH = "fips_dh_check,fips_dh_gen,fips_dh_key" -$ LIB_HMAC = "fips_hmac,fips_hmac_selftest" -$! -$! Setup exceptional compilations -$! -$ ! Add definitions for no threads on OpenVMS 7.1 and higher -$ COMPILEWITH_CC3 = ",bss_rtcp," -$ ! Disable the DOLLARID warning -$ COMPILEWITH_CC4 = ",a_utctm,bss_log,o_time," -$ ! Disable disjoint optimization -$ COMPILEWITH_CC5 = ",md2_dgst,md4_dgst,md5_dgst,mdc2dgst," + - - "sha_dgst,sha1dgst,rmd_dgst,bf_enc," -$ ! Disable the MIXLINKAGE warning -$ COMPILEWITH_CC6 = ",fips_set_key," -$! -$! Figure Out What Other Modules We Are To Build. -$! -$ BUILD_SET: -$! -$! Define A Module Counter. -$! -$ MODULE_COUNTER = 0 -$! -$! Top Of The Loop. -$! -$ MODULE_NEXT: -$! -$! Extract The Module Name From The Encryption List. -$! -$ MODULE_NAME = F$ELEMENT(MODULE_COUNTER,",",ENCRYPT_TYPES) -$ IF MODULE_NAME.EQS."Basic" THEN MODULE_NAME = "" -$ MODULE_NAME1 = MODULE_NAME -$! -$! Check To See If We Are At The End Of The Module List. -$! -$ IF (MODULE_NAME.EQS.",") -$ THEN -$! -$! We Are At The End Of The Module List, Go To MODULE_DONE. -$! -$ GOTO MODULE_DONE -$! -$! End The Module List Check. -$! -$ ENDIF -$! -$! Increment The Moudle Counter. -$! -$ MODULE_COUNTER = MODULE_COUNTER + 1 -$! -$! Create The Library and Apps Module Names. -$! -$ LIB_MODULE = "LIB_" + MODULE_NAME -$ APPS_MODULE = "APPS_" + MODULE_NAME -$ IF (MODULE_NAME.EQS."ASN1_2") -$ THEN -$ MODULE_NAME = "ASN1" -$ ENDIF -$ IF (MODULE_NAME.EQS."EVP_2") -$ THEN -$ MODULE_NAME = "EVP" -$ ENDIF -$! -$! Set state (can be LIB and APPS) -$! -$ STATE = "LIB" -$ IF BUILDALL .EQS. "APPS" THEN STATE = "APPS" -$! -$! Check if the library module name actually is defined -$! -$ IF F$TYPE('LIB_MODULE') .EQS. "" -$ THEN -$ WRITE SYS$ERROR "" -$ WRITE SYS$ERROR "The module ",MODULE_NAME," does not exist. Continuing..." -$ WRITE SYS$ERROR "" -$ GOTO MODULE_NEXT -$ ENDIF -$! -$! Top Of The Module Loop. -$! -$ MODULE_AGAIN: -$! -$! Tell The User What Module We Are Building. -$! -$ IF (MODULE_NAME1.NES."") -$ THEN -$ IF STATE .EQS. "LIB" -$ THEN -$ WRITE SYS$OUTPUT "Compiling The ",MODULE_NAME1," Library Files. (",BUILDALL,",",STATE,")" -$ ELSE IF F$TYPE('APPS_MODULE') .NES. "" -$ THEN -$ WRITE SYS$OUTPUT "Compiling The ",MODULE_NAME1," Applications. (",BUILDALL,",",STATE,")" -$ ENDIF -$ ENDIF -$ ENDIF -$! -$! Define A File Counter And Set It To "0". -$! -$ FILE_COUNTER = 0 -$ APPLICATION = "" -$ APPLICATION_COUNTER = 0 -$! -$! Top Of The File Loop. -$! -$ NEXT_FILE: -$! -$! Look in the LIB_MODULE is we're in state LIB -$! -$ IF STATE .EQS. "LIB" -$ THEN -$! -$! O.K, Extract The File Name From The File List. -$! -$ FILE_NAME = F$ELEMENT(FILE_COUNTER,",",'LIB_MODULE') -$! -$! else -$! -$ ELSE -$ FILE_NAME = "," -$! -$ IF F$TYPE('APPS_MODULE') .NES. "" -$ THEN -$! -$! Extract The File Name From The File List. -$! This part is a bit more complicated. -$! -$ IF APPLICATION .EQS. "" -$ THEN -$ APPLICATION = F$ELEMENT(APPLICATION_COUNTER,";",'APPS_MODULE') -$ APPLICATION_COUNTER = APPLICATION_COUNTER + 1 -$ APPLICATION_OBJECTS = F$ELEMENT(1,"/",APPLICATION) -$ APPLICATION = F$ELEMENT(0,"/",APPLICATION) -$ FILE_COUNTER = 0 -$ ENDIF -$ -$! WRITE SYS$OUTPUT "DEBUG: SHOW SYMBOL APPLICATION*" -$! SHOW SYMBOL APPLICATION* -$! -$ IF APPLICATION .NES. ";" -$ THEN -$ FILE_NAME = F$ELEMENT(FILE_COUNTER,",",APPLICATION_OBJECTS) -$ IF FILE_NAME .EQS. "," -$ THEN -$ APPLICATION = "" -$ GOTO NEXT_FILE -$ ENDIF -$ ENDIF -$ ENDIF -$ ENDIF -$! -$! Check To See If We Are At The End Of The File List. -$! -$ IF (FILE_NAME.EQS.",") -$ THEN -$! -$! We Are At The End Of The File List, Change State Or Goto FILE_DONE. -$! -$ IF STATE .EQS. "LIB" .AND. BUILDALL .NES. "LIBRARY" -$ THEN -$ STATE = "APPS" -$ GOTO MODULE_AGAIN -$ ELSE -$ GOTO FILE_DONE -$ ENDIF -$! -$! End The File List Check. -$! -$ ENDIF -$! -$! Increment The Counter. -$! -$ FILE_COUNTER = FILE_COUNTER + 1 -$! -$! Create The Source File Name. -$! -$ TMP_FILE_NAME = F$ELEMENT(1,"]",FILE_NAME) -$ IF TMP_FILE_NAME .EQS. "]" THEN TMP_FILE_NAME = FILE_NAME -$ IF F$ELEMENT(0,".",TMP_FILE_NAME) .EQS. TMP_FILE_NAME THEN - - FILE_NAME = FILE_NAME + ".c" -$ IF (MODULE_NAME.NES."") -$ THEN -$ SOURCE_FILE = "SYS$DISK:[." + MODULE_NAME+ "]" + FILE_NAME -$ ELSE -$ SOURCE_FILE = "SYS$DISK:[]" + FILE_NAME -$ ENDIF -$ SOURCE_FILE = SOURCE_FILE - "][" -$! -$! Create The Object File Name. -$! -$ OBJECT_FILE = OBJ_DIR + F$PARSE(FILE_NAME,,,"NAME","SYNTAX_ONLY") + ".OBJ" -$ ON WARNING THEN GOTO NEXT_FILE -$! -$! Check To See If The File We Want To Compile Is Actually There. -$! -$ IF (F$SEARCH(SOURCE_FILE).EQS."") -$ THEN -$! -$! Tell The User That The File Doesn't Exist. -$! -$ WRITE SYS$OUTPUT "" -$ WRITE SYS$OUTPUT "The File ",SOURCE_FILE," Doesn't Exist." -$ WRITE SYS$OUTPUT "" -$! -$! Exit The Build. -$! -$ GOTO EXIT -$! -$! End The File Exist Check. -$! -$ ENDIF -$! -$! Tell The User We Are Compiling The File. -$! -$ IF (MODULE_NAME.EQS."") -$ THEN -$ WRITE SYS$OUTPUT "Compiling The ",FILE_NAME," File. (",BUILDALL,",",STATE,")" -$ ENDIF -$ IF (MODULE_NAME.NES."") -$ THEN -$ WRITE SYS$OUTPUT " ",FILE_NAME,"" -$ ENDIF -$! -$! Compile The File. -$! -$ ON ERROR THEN GOTO NEXT_FILE -$ FILE_NAME0 = F$ELEMENT(0,".",FILE_NAME) -$ IF FILE_NAME - ".mar" .NES. FILE_NAME -$ THEN -$ MACRO/OBJECT='OBJECT_FILE' 'SOURCE_FILE' -$ ELSE -$ IF COMPILEWITH_CC3 - FILE_NAME0 .NES. COMPILEWITH_CC3 -$ THEN -$ CC3/OBJECT='OBJECT_FILE' 'SOURCE_FILE' -$ ELSE -$ IF COMPILEWITH_CC4 - FILE_NAME0 .NES. COMPILEWITH_CC4 -$ THEN -$ CC4/OBJECT='OBJECT_FILE' 'SOURCE_FILE' -$ ELSE -$ IF COMPILEWITH_CC5 - FILE_NAME0 .NES. COMPILEWITH_CC5 -$ THEN -$ CC5/OBJECT='OBJECT_FILE' 'SOURCE_FILE' -$ ELSE -$ IF COMPILEWITH_CC6 - FILE_NAME0 .NES. COMPILEWITH_CC6 -$ THEN -$ CC6/OBJECT='OBJECT_FILE' 'SOURCE_FILE' -$ ELSE -$ CC/OBJECT='OBJECT_FILE' 'SOURCE_FILE' -$ ENDIF -$ ENDIF -$ ENDIF -$ ENDIF -$ ENDIF -$ IF STATE .EQS. "LIB" -$ THEN -$! -$! Add It To The Library. -$! -$ LIBRARY/REPLACE 'LIB_NAME' 'OBJECT_FILE' -$! -$! Time To Clean Up The Object File. -$! -$ DELETE 'OBJECT_FILE';* -$ ENDIF -$! -$! Go Back And Do It Again. -$! -$ GOTO NEXT_FILE -$! -$! All Done With This Library Part. -$! -$ FILE_DONE: -$! -$! Time To Build Some Applications -$! -$ IF F$TYPE('APPS_MODULE') .NES. "" .AND. BUILDALL .NES. "LIBRARY" -$ THEN -$ APPLICATION_COUNTER = 0 -$ NEXT_APPLICATION: -$ APPLICATION = F$ELEMENT(APPLICATION_COUNTER,";",'APPS_MODULE') -$ IF APPLICATION .EQS. ";" THEN GOTO APPLICATION_DONE -$ -$ APPLICATION_COUNTER = APPLICATION_COUNTER + 1 -$ APPLICATION_OBJECTS = F$ELEMENT(1,"/",APPLICATION) -$ APPLICATION = F$ELEMENT(0,"/",APPLICATION) -$ -$! WRITE SYS$OUTPUT "DEBUG: SHOW SYMBOL APPLICATION*" -$! SHOW SYMBOL APPLICATION* -$! -$! Tell the user what happens -$! -$ WRITE SYS$OUTPUT " ",APPLICATION,".exe" -$! -$! Link The Program. -$! -$ ON ERROR THEN GOTO NEXT_APPLICATION -$! -$! Check To See If We Are To Link With A Specific TCP/IP Library. -$! -$ IF (TCPIP_LIB.NES."") -$ THEN -$! -$! Link With A TCP/IP Library. -$! -$ LINK/'DEBUGGER'/'TRACEBACK'/EXE='EXE_DIR''APPLICATION'.EXE - - 'OBJ_DIR''APPLICATION_OBJECTS', - - 'CRYPTO_LIB'/LIBRARY, - - 'TCPIP_LIB','OPT_FILE'/OPTION -$! -$! Else... -$! -$ ELSE -$! -$! Don't Link With A TCP/IP Library. -$! -$ LINK/'DEBUGGER'/'TRACEBACK'/EXE='EXE_DIR''APPLICATION'.EXE - - 'OBJ_DIR''APPLICATION_OBJECTS',- - 'CRYPTO_LIB'/LIBRARY, - - 'OPT_FILE'/OPTION -$! -$! End The TCP/IP Library Check. -$! -$ ENDIF -$ GOTO NEXT_APPLICATION -$ APPLICATION_DONE: -$ ENDIF -$! -$! Go Back And Get The Next Module. -$! -$ GOTO MODULE_NEXT -$! -$! All Done With This Module. -$! -$ MODULE_DONE: -$! -$! Tell The User That We Are All Done. -$! -$ WRITE SYS$OUTPUT "All Done..." -$ EXIT: -$ GOSUB CLEANUP -$ EXIT -$! -$! Check For The Link Option FIle. -$! -$ CHECK_OPT_FILE: -$! -$! Check To See If We Need To Make A VAX C Option File. -$! -$ IF (COMPILER.EQS."VAXC") -$ THEN -$! -$! Check To See If We Already Have A VAX C Linker Option File. -$! -$ IF (F$SEARCH(OPT_FILE).EQS."") -$ THEN -$! -$! We Need A VAX C Linker Option File. -$! -$ CREATE 'OPT_FILE' -$DECK -! -! Default System Options File To Link Agianst -! The Sharable VAX C Runtime Library. -! -SYS$SHARE:VAXCRTL.EXE/SHARE -$EOD -$! -$! End The Option File Check. -$! -$ ENDIF -$! -$! End The VAXC Check. -$! -$ ENDIF -$! -$! Check To See If We Need A GNU C Option File. -$! -$ IF (COMPILER.EQS."GNUC") -$ THEN -$! -$! Check To See If We Already Have A GNU C Linker Option File. -$! -$ IF (F$SEARCH(OPT_FILE).EQS."") -$ THEN -$! -$! We Need A GNU C Linker Option File. -$! -$ CREATE 'OPT_FILE' -$DECK -! -! Default System Options File To Link Agianst -! The Sharable C Runtime Library. -! -GNU_CC:[000000]GCCLIB/LIBRARY -SYS$SHARE:VAXCRTL/SHARE -$EOD -$! -$! End The Option File Check. -$! -$ ENDIF -$! -$! End The GNU C Check. -$! -$ ENDIF -$! -$! Check To See If We Need A DEC C Option File. -$! -$ IF (COMPILER.EQS."DECC") -$ THEN -$! -$! Check To See If We Already Have A DEC C Linker Option File. -$! -$ IF (F$SEARCH(OPT_FILE).EQS."") -$ THEN -$! -$! Figure Out If We Need An AXP Or A VAX Linker Option File. -$! -$ IF ARCH .EQS. "VAX" -$ THEN -$! -$! We Need A DEC C Linker Option File For VAX. -$! -$ CREATE 'OPT_FILE' -$DECK -! -! Default System Options File To Link Agianst -! The Sharable DEC C Runtime Library. -! -SYS$SHARE:DECC$SHR.EXE/SHARE -$EOD -$! -$! Else... -$! -$ ELSE -$! -$! Create The AXP Linker Option File. -$! -$ CREATE 'OPT_FILE' -$DECK -! -! Default System Options File For AXP To Link Agianst -! The Sharable C Runtime Library. -! -SYS$SHARE:CMA$OPEN_LIB_SHR/SHARE -SYS$SHARE:CMA$OPEN_RTL/SHARE -$EOD -$! -$! End The VAX/AXP DEC C Option File Check. -$! -$ ENDIF -$! -$! End The Option File Search. -$! -$ ENDIF -$! -$! End The DEC C Check. -$! -$ ENDIF -$! -$! Tell The User What Linker Option File We Are Using. -$! -$ WRITE SYS$OUTPUT "Using Linker Option File ",OPT_FILE,"." -$! -$! Time To RETURN. -$! -$ RETURN -$! -$! Check The User's Options. -$! -$ CHECK_OPTIONS: -$! -$! Check To See If P1 Is Blank. -$! -$ IF (P1.EQS."ALL") -$ THEN -$! -$! P1 Is Blank, So Build Everything. -$! -$ BUILDALL = "TRUE" -$! -$! Else... -$! -$ ELSE -$! -$! Else, Check To See If P1 Has A Valid Arguement. -$! -$ IF (P1.EQS."LIBRARY").OR.(P1.EQS."APPS") -$ THEN -$! -$! A Valid Arguement. -$! -$ BUILDALL = P1 -$! -$! Else... -$! -$ ELSE -$! -$! Tell The User We Don't Know What They Want. -$! -$ WRITE SYS$OUTPUT "" -$ WRITE SYS$OUTPUT "The Option ",P1," Is Invalid. The Valid Options Are:" -$ WRITE SYS$OUTPUT "" -$ WRITE SYS$OUTPUT " ALL : Just Build Everything." -$ WRITE SYS$OUTPUT " LIBRARY : To Compile Just The [.xxx.EXE.CRYPTO]LIBCRYPTO.OLB Library." -$ WRITE SYS$OUTPUT " APPS : To Compile Just The [.xxx.EXE.CRYPTO]*.EXE Programs." -$ WRITE SYS$OUTPUT "" -$ WRITE SYS$OUTPUT " Where 'xxx' Stands For:" -$ WRITE SYS$OUTPUT "" -$ WRITE SYS$OUTPUT " AXP : Alpha Architecture." -$ WRITE SYS$OUTPUT " VAX : VAX Architecture." -$ WRITE SYS$OUTPUT "" -$! -$! Time To EXIT. -$! -$ EXIT -$! -$! End The Valid Arguement Check. -$! -$ ENDIF -$! -$! End The P1 Check. -$! -$ ENDIF -$! -$! Check To See If P2 Is Blank. -$! -$ IF (P2.EQS."NODEBUG") -$ THEN -$! -$! P2 Is NODEBUG, So Compile Without The Debugger Information. -$! -$ DEBUGGER = "NODEBUG" -$ TRACEBACK = "NOTRACEBACK" -$ GCC_OPTIMIZE = "OPTIMIZE" -$ CC_OPTIMIZE = "OPTIMIZE" -$ MACRO_OPTIMIZE = "OPTIMIZE" -$ WRITE SYS$OUTPUT "No Debugger Information Will Be Produced During Compile." -$ WRITE SYS$OUTPUT "Compiling With Compiler Optimization." -$ ELSE -$! -$! Check To See If We Are To Compile With Debugger Information. -$! -$ IF (P2.EQS."DEBUG") -$ THEN -$! -$! Compile With Debugger Information. -$! -$ DEBUGGER = "DEBUG" -$ TRACEBACK = "TRACEBACK" -$ GCC_OPTIMIZE = "NOOPTIMIZE" -$ CC_OPTIMIZE = "NOOPTIMIZE" -$ MACRO_OPTIMIZE = "NOOPTIMIZE" -$ WRITE SYS$OUTPUT "Debugger Information Will Be Produced During Compile." -$ WRITE SYS$OUTPUT "Compiling Without Compiler Optimization." -$ ELSE -$! -$! They Entered An Invalid Option.. -$! -$ WRITE SYS$OUTPUT "" -$ WRITE SYS$OUTPUT "The Option ",P2," Is Invalid. The Valid Options Are:" -$ WRITE SYS$OUTPUT "" -$ WRITE SYS$OUTPUT " DEBUG : Compile With The Debugger Information." -$ WRITE SYS$OUTPUT " NODEBUG : Compile Without The Debugger Information." -$ WRITE SYS$OUTPUT "" -$! -$! Time To EXIT. -$! -$ EXIT -$! -$! End The Valid Arguement Check. -$! -$ ENDIF -$! -$! End The P2 Check. -$! -$ ENDIF -$! -$! Special Threads For OpenVMS v7.1 Or Later -$! -$! Written By: Richard Levitte -$! richard@levitte.org -$! -$! -$! Check To See If We Have A Option For P5. -$! -$ IF (P5.EQS."") -$ THEN -$! -$! Get The Version Of VMS We Are Using. -$! -$ ISSEVEN := -$ TMP = F$ELEMENT(0,"-",F$EXTRACT(1,4,F$GETSYI("VERSION"))) -$ TMP = F$INTEGER(F$ELEMENT(0,".",TMP)+F$ELEMENT(1,".",TMP)) -$! -$! Check To See If The VMS Version Is v7.1 Or Later. -$! -$ IF (TMP.GE.71) -$ THEN -$! -$! We Have OpenVMS v7.1 Or Later, So Use The Special Threads. -$! -$ ISSEVEN := ,PTHREAD_USE_D4 -$! -$! End The VMS Version Check. -$! -$ ENDIF -$! -$! End The P5 Check. -$! -$ ENDIF -$! -$! Check To See If P3 Is Blank. -$! -$ IF (P3.EQS."") -$ THEN -$! -$! O.K., The User Didn't Specify A Compiler, Let's Try To -$! Find Out Which One To Use. -$! -$! Check To See If We Have GNU C. -$! -$ IF (F$TRNLNM("GNU_CC").NES."") -$ THEN -$! -$! Looks Like GNUC, Set To Use GNUC. -$! -$ P3 = "GNUC" -$! -$! Else... -$! -$ ELSE -$! -$! Check To See If We Have VAXC Or DECC. -$! -$ IF (ARCH.EQS."AXP").OR.(F$TRNLNM("DECC$CC_DEFAULT").NES."") -$ THEN -$! -$! Looks Like DECC, Set To Use DECC. -$! -$ P3 = "DECC" -$! -$! Else... -$! -$ ELSE -$! -$! Looks Like VAXC, Set To Use VAXC. -$! -$ P3 = "VAXC" -$! -$! End The VAXC Compiler Check. -$! -$ ENDIF -$! -$! End The DECC & VAXC Compiler Check. -$! -$ ENDIF -$! -$! End The Compiler Check. -$! -$ ENDIF -$! -$! Check To See If We Have A Option For P4. -$! -$ IF (P4.EQS."") -$ THEN -$! -$! Find out what socket library we have available -$! -$ IF F$PARSE("SOCKETSHR:") .NES. "" -$ THEN -$! -$! We have SOCKETSHR, and it is my opinion that it's the best to use. -$! -$ P4 = "SOCKETSHR" -$! -$! Tell the user -$! -$ WRITE SYS$OUTPUT "Using SOCKETSHR for TCP/IP" -$! -$! Else, let's look for something else -$! -$ ELSE -$! -$! Like UCX (the reason to do this before Multinet is that the UCX -$! emulation is easier to use...) -$! -$ IF F$TRNLNM("UCX$IPC_SHR") .NES. "" - - .OR. F$PARSE("SYS$SHARE:UCX$IPC_SHR.EXE") .NES. "" - - .OR. F$PARSE("SYS$LIBRARY:UCX$IPC.OLB") .NES. "" -$ THEN -$! -$! Last resort: a UCX or UCX-compatible library -$! -$ P4 = "UCX" -$! -$! Tell the user -$! -$ WRITE SYS$OUTPUT "Using UCX or an emulation thereof for TCP/IP" -$! -$! That was all... -$! -$ ENDIF -$ ENDIF -$ ENDIF -$! -$! Set Up Initial CC Definitions, Possibly With User Ones -$! -$ CCDEFS = "TCPIP_TYPE_''P4',DSO_VMS" -$ IF F$TYPE(USER_CCDEFS) .NES. "" THEN CCDEFS = CCDEFS + "," + USER_CCDEFS -$ CCEXTRAFLAGS = "" -$ IF F$TYPE(USER_CCFLAGS) .NES. "" THEN CCEXTRAFLAGS = USER_CCFLAGS -$ CCDISABLEWARNINGS = "LONGLONGTYPE,LONGLONGSUFX,FOUNDCR" -$ IF F$TYPE(USER_CCDISABLEWARNINGS) .NES. "" THEN - - CCDISABLEWARNINGS = CCDISABLEWARNINGS + "," + USER_CCDISABLEWARNINGS -$! -$! Check To See If The User Entered A Valid Paramter. -$! -$ IF (P3.EQS."VAXC").OR.(P3.EQS."DECC").OR.(P3.EQS."GNUC") -$ THEN -$! -$! Check To See If The User Wanted DECC. -$! -$ IF (P3.EQS."DECC") -$ THEN -$! -$! Looks Like DECC, Set To Use DECC. -$! -$ COMPILER = "DECC" -$! -$! Tell The User We Are Using DECC. -$! -$ WRITE SYS$OUTPUT "Using DECC 'C' Compiler." -$! -$! Use DECC... -$! -$ CC = "CC" -$ IF ARCH.EQS."VAX" .AND. F$TRNLNM("DECC$CC_DEFAULT").NES."/DECC" - - THEN CC = "CC/DECC" -$ CC = CC + "/''CC_OPTIMIZE'/''DEBUGGER'/STANDARD=ANSI89" + - - "/NOLIST/PREFIX=ALL" + - - "/INCLUDE=(SYS$DISK:[],SYS$DISK:[-],SYS$DISK:[-.CRYPTO])" + - - CCEXTRAFLAGS -$! -$! Define The Linker Options File Name. -$! -$ OPT_FILE = "SYS$DISK:[]VAX_DECC_OPTIONS.OPT" -$! -$! End DECC Check. -$! -$ ENDIF -$! -$! Check To See If We Are To Use VAXC. -$! -$ IF (P3.EQS."VAXC") -$ THEN -$! -$! Looks Like VAXC, Set To Use VAXC. -$! -$ COMPILER = "VAXC" -$! -$! Tell The User We Are Using VAX C. -$! -$ WRITE SYS$OUTPUT "Using VAXC 'C' Compiler." -$! -$! Compile Using VAXC. -$! -$ CC = "CC" -$ IF ARCH.EQS."AXP" -$ THEN -$ WRITE SYS$OUTPUT "There is no VAX C on Alpha!" -$ EXIT -$ ENDIF -$ IF F$TRNLNM("DECC$CC_DEFAULT").EQS."/DECC" THEN CC = "CC/VAXC" -$ CC = CC + "/''CC_OPTIMIZE'/''DEBUGGER'/NOLIST" + - - "/INCLUDE=(SYS$DISK:[],SYS$DISK:[-],SYS$DISK:[-.CRYPTO])" + - - CCEXTRAFLAGS -$ CCDEFS = """VAXC""," + CCDEFS -$! -$! Define <sys> As SYS$COMMON:[SYSLIB] -$! -$ DEFINE/NOLOG SYS SYS$COMMON:[SYSLIB] -$! -$! Define The Linker Options File Name. -$! -$ OPT_FILE = "SYS$DISK:[]VAX_VAXC_OPTIONS.OPT" -$! -$! End VAXC Check -$! -$ ENDIF -$! -$! Check To See If We Are To Use GNU C. -$! -$ IF (P3.EQS."GNUC") -$ THEN -$! -$! Looks Like GNUC, Set To Use GNUC. -$! -$ COMPILER = "GNUC" -$! -$! Tell The User We Are Using GNUC. -$! -$ WRITE SYS$OUTPUT "Using GNU 'C' Compiler." -$! -$! Use GNU C... -$! -$ CC = "GCC/NOCASE_HACK/''GCC_OPTIMIZE'/''DEBUGGER'/NOLIST" + - - "/INCLUDE=(SYS$DISK:[],SYS$DISK:[-],SYS$DISK:[-.CRYPTO])" + - - CCEXTRAFLAGS -$! -$! Define The Linker Options File Name. -$! -$ OPT_FILE = "SYS$DISK:[]VAX_GNUC_OPTIONS.OPT" -$! -$! End The GNU C Check. -$! -$ ENDIF -$! -$! Set up default defines -$! -$ CCDEFS = """FLAT_INC=1""," + CCDEFS -$! -$! Finish up the definition of CC. -$! -$ IF COMPILER .EQS. "DECC" -$ THEN -$ IF CCDISABLEWARNINGS .EQS. "" -$ THEN -$ CC4DISABLEWARNINGS = "DOLLARID" -$ CC6DISABLEWARNINGS = "MIXLINKAGE" -$ ELSE -$ CC4DISABLEWARNINGS = CCDISABLEWARNINGS + ",DOLLARID" -$ CC6DISABLEWARNINGS = CCDISABLEWARNINGS + ",MIXLINKAGE" -$ CCDISABLEWARNINGS = "/WARNING=(DISABLE=(" + CCDISABLEWARNINGS + "))" -$ ENDIF -$ CC4DISABLEWARNINGS = "/WARNING=(DISABLE=(" + CC4DISABLEWARNINGS + "))" -$ CC6DISABLEWARNINGS = "/WARNING=(DISABLE=(" + CC6DISABLEWARNINGS + "))" -$ ELSE -$ CCDISABLEWARNINGS = "" -$ CC4DISABLEWARNINGS = "" -$ CC6DISABLEWARNINGS = "" -$ ENDIF -$ CC3 = CC + "/DEFINE=(" + CCDEFS + ISSEVEN + ")" + CCDISABLEWARNINGS -$ CC = CC + "/DEFINE=(" + CCDEFS + ")" + CCDISABLEWARNINGS -$ IF ARCH .EQS. "VAX" .AND. COMPILER .EQS. "DECC" .AND. P2 .NES. "DEBUG" -$ THEN -$ CC5 = CC + "/OPTIMIZE=NODISJOINT" -$ ELSE -$ CC5 = CC + "/NOOPTIMIZE" -$ ENDIF -$ CC4 = CC - CCDISABLEWARNINGS + CC4DISABLEWARNINGS -$ CC6 = CC - CCDISABLEWARNINGS + CC6DISABLEWARNINGS -$! -$! Show user the result -$! -$ WRITE/SYMBOL SYS$OUTPUT "Main C Compiling Command: ",CC -$! -$! Else The User Entered An Invalid Arguement. -$! -$ ELSE -$! -$! Tell The User We Don't Know What They Want. -$! -$ WRITE SYS$OUTPUT "" -$ WRITE SYS$OUTPUT "The Option ",P3," Is Invalid. The Valid Options Are:" -$ WRITE SYS$OUTPUT "" -$ WRITE SYS$OUTPUT " VAXC : To Compile With VAX C." -$ WRITE SYS$OUTPUT " DECC : To Compile With DEC C." -$ WRITE SYS$OUTPUT " GNUC : To Compile With GNU C." -$ WRITE SYS$OUTPUT "" -$! -$! Time To EXIT. -$! -$ EXIT -$! -$! End The Valid Arguement Check. -$! -$ ENDIF -$! -$! Build a MACRO command for the architecture at hand -$! -$ IF ARCH .EQS. "VAX" THEN MACRO = "MACRO/''DEBUGGER'" -$ IF ARCH .EQS. "AXP" THEN MACRO = "MACRO/MIGRATION/''DEBUGGER'/''MACRO_OPTIMIZE'" -$! -$! Show user the result -$! -$ WRITE/SYMBOL SYS$OUTPUT "Main MACRO Compiling Command: ",MACRO -$! -$! Time to check the contents, and to make sure we get the correct library. -$! -$ IF P4.EQS."SOCKETSHR" .OR. P4.EQS."MULTINET" .OR. P4.EQS."UCX" - - .OR. P4.EQS."TCPIP" .OR. P4.EQS."NONE" -$ THEN -$! -$! Check to see if SOCKETSHR was chosen -$! -$ IF P4.EQS."SOCKETSHR" -$ THEN -$! -$! Set the library to use SOCKETSHR -$! -$ TCPIP_LIB = "SYS$DISK:[-.VMS]SOCKETSHR_SHR.OPT/OPT" -$! -$! Done with SOCKETSHR -$! -$ ENDIF -$! -$! Check to see if MULTINET was chosen -$! -$ IF P4.EQS."MULTINET" -$ THEN -$! -$! Set the library to use UCX emulation. -$! -$ P4 = "UCX" -$! -$! Done with MULTINET -$! -$ ENDIF -$! -$! Check to see if UCX was chosen -$! -$ IF P4.EQS."UCX" -$ THEN -$! -$! Set the library to use UCX. -$! -$ TCPIP_LIB = "SYS$DISK:[-.VMS]UCX_SHR_DECC.OPT/OPT" -$ IF F$TRNLNM("UCX$IPC_SHR") .NES. "" -$ THEN -$ TCPIP_LIB = "SYS$DISK:[-.VMS]UCX_SHR_DECC_LOG.OPT/OPT" -$ ELSE -$ IF COMPILER .NES. "DECC" .AND. ARCH .EQS. "VAX" THEN - - TCPIP_LIB = "SYS$DISK:[-.VMS]UCX_SHR_VAXC.OPT/OPT" -$ ENDIF -$! -$! Done with UCX -$! -$ ENDIF -$! -$! Check to see if TCPIP was chosen -$! -$ IF P4.EQS."TCPIP" -$ THEN -$! -$! Set the library to use TCPIP (post UCX). -$! -$ TCPIP_LIB = "SYS$DISK:[-.VMS]TCPIP_SHR_DECC.OPT/OPT" -$! -$! Done with TCPIP -$! -$ ENDIF -$! -$! Check to see if NONE was chosen -$! -$ IF P4.EQS."NONE" -$ THEN -$! -$! Do not use a TCPIP library. -$! -$ TCPIP_LIB = "" -$! -$! Done with TCPIP -$! -$ ENDIF -$! -$! Print info -$! -$ WRITE SYS$OUTPUT "TCP/IP library spec: ", TCPIP_LIB -$! -$! Else The User Entered An Invalid Arguement. -$! -$ ELSE -$! -$! Tell The User We Don't Know What They Want. -$! -$ WRITE SYS$OUTPUT "" -$ WRITE SYS$OUTPUT "The Option ",P4," Is Invalid. The Valid Options Are:" -$ WRITE SYS$OUTPUT "" -$ WRITE SYS$OUTPUT " SOCKETSHR : To link with SOCKETSHR TCP/IP library." -$ WRITE SYS$OUTPUT " UCX : To link with UCX TCP/IP library." -$ WRITE SYS$OUTPUT " TCPIP : To link with TCPIP (post UCX) TCP/IP library." -$ WRITE SYS$OUTPUT "" -$! -$! Time To EXIT. -$! -$ EXIT -$! -$! Done with TCP/IP libraries -$! -$ ENDIF -$! -$! Check if the user wanted to compile just a subset of all the encryption -$! methods. -$! -$ IF P6 .NES. "" -$ THEN -$ ENCRYPT_TYPES = P6 -$ ENDIF -$! -$! Time To RETURN... -$! -$ RETURN -$! -$ INITIALISE: -$! -$! Save old value of the logical name OPENSSL -$! -$ __SAVE_OPENSSL = F$TRNLNM("OPENSSL","LNM$PROCESS_TABLE") -$! -$! Save directory information -$! -$ __HERE = F$PARSE(F$PARSE("A.;",F$ENVIRONMENT("PROCEDURE"))-"A.;","[]A.;") - "A.;" -$ __HERE = F$EDIT(__HERE,"UPCASE") -$ __TOP = __HERE - "FIPS-1_0]" -$ __INCLUDE = __TOP + "INCLUDE.OPENSSL]" -$! -$! Set up the logical name OPENSSL to point at the include directory -$! -$ DEFINE OPENSSL/NOLOG '__INCLUDE' -$! -$! Done -$! -$ RETURN -$! -$ CLEANUP: -$! -$! Restore the logical name OPENSSL if it had a value -$! -$ IF __SAVE_OPENSSL .EQS. "" -$ THEN -$ DEASSIGN OPENSSL -$ ELSE -$ DEFINE/NOLOG OPENSSL '__SAVE_OPENSSL' -$ ENDIF -$! -$! Done -$! -$ RETURN |