diff options
Diffstat (limited to 'openssl/makevms.com')
| -rw-r--r-- | openssl/makevms.com | 404 |
1 files changed, 263 insertions, 141 deletions
diff --git a/openssl/makevms.com b/openssl/makevms.com index 8c59c67ca..eb22f20db 100644 --- a/openssl/makevms.com +++ b/openssl/makevms.com @@ -15,7 +15,7 @@ $! The "xxx" denotes the machine architecture of ALPHA, IA64 or VAX. $! $! This procedures accepts two command line options listed below. $! -$! Specify one of the following build options for P1. +$! P1 specifies one of the following build options: $! $! ALL Just build "everything". $! CONFIG Just build the "[.CRYPTO._xxx]OPENSSLCONF.H" file. @@ -31,19 +31,21 @@ $! TEST Just build the "[.xxx.EXE.TEST]" test programs for OpenSSL. $! APPS Just build the "[.xxx.EXE.APPS]" application programs for OpenSSL. $! ENGINES Just build the "[.xxx.EXE.ENGINES]" application programs for OpenSSL. $! +$! P2, if defined, specifies the C pointer size. Ignored on VAX. +$! ("64=ARGV" gives more efficient code with HP C V7.3 or newer.) +$! Supported values are: $! -$! For 64 bit architectures (Alpha and IA64), specify the pointer size as P2. -$! For 32 bit architectures (VAX), P2 is ignored. -$! Currently supported values are: +$! "" Compile with default (/NOPOINTER_SIZE). +$! 32 Compile with /POINTER_SIZE=32 (SHORT). +$! 64 Compile with /POINTER_SIZE=64[=ARGV] (LONG[=ARGV]). +$! (Automatically select ARGV if compiler supports it.) +$! 64= Compile with /POINTER_SIZE=64 (LONG). +$! 64=ARGV Compile with /POINTER_SIZE=64=ARGV (LONG=ARGV). $! -$! 32 To ge a library compiled with /POINTER_SIZE=32 -$! 64 To ge a library compiled with /POINTER_SIZE=64 +$! P3 specifies DEBUG or NODEBUG, to compile with or without debugging +$! information. $! -$! -$! Specify DEBUG or NODEBUG as P3 to compile with or without debugging -$! information. -$! -$! Specify which compiler as P4 to try to compile under. +$! P4 specifies which compiler to try to compile under. $! $! VAXC For VAX C. $! DECC For DEC C. @@ -65,8 +67,18 @@ $! NONE to avoid specifying which TCP/IP implementation to $! use at build time (this works with DEC C). This is $! the default. $! -$! P6, if defined, sets a compiler thread NOT needed on OpenVMS 7.1 (and up) +$! P6, if defined, sets a compiler thread NOT needed on OpenVMS 7.1 (and up). +$! +$! P7, if defined, specifies a directory where ZLIB files (zlib.h, +$! libz.olb) may be found. Optionally, a non-default object library +$! name may be included ("dev:[dir]libz_64.olb", for example). +$! $! +$! Announce/identify. +$! +$ proc = f$environment( "procedure") +$ write sys$output "@@@ "+ - + f$parse( proc, , , "name")+ f$parse( proc, , , "type") $! $ DEF_ORIG = F$ENVIRONMENT( "DEFAULT") $ ON ERROR THEN GOTO TIDY @@ -104,6 +116,10 @@ $! End The Architecture Check. $! $ ENDIF $! +$ ARCHD = ARCH +$ LIB32 = "32" +$ POINTER_SIZE = "" +$! $! Get VMS version. $! $ VMS_VERSION = f$edit( f$getsyi( "VERSION"), "TRIM") @@ -178,12 +194,12 @@ $ CONFIG: $! $! Tell The User We Are Creating The [.CRYPTO._xxx]OPENSSLCONF.H File. $! -$ WRITE SYS$OUTPUT "Creating [.CRYPTO._''ARCH']OPENSSLCONF.H Include File." +$ WRITE SYS$OUTPUT "Creating [.CRYPTO.''ARCHD']OPENSSLCONF.H Include File." $! $! First, make sure the directory exists. $! -$ IF F$PARSE("SYS$DISK:[.CRYPTO._''ARCH']") .EQS. "" THEN - - CREATE/DIRECTORY SYS$DISK:[.CRYPTO._'ARCH'] +$ IF F$PARSE("SYS$DISK:[.CRYPTO.''ARCHD']") .EQS. "" THEN - + CREATE/DIRECTORY SYS$DISK:[.CRYPTO.'ARCHD'] $! $! Different tar/UnZip versions/option may have named the file differently $ IF F$SEARCH("[.crypto]opensslconf.h_in") .NES. "" @@ -209,7 +225,7 @@ $! $! Create The [.CRYPTO._xxx]OPENSSLCONF.H File. $! Make sure it has the right format. $! -$ OSCH_NAME = "SYS$DISK:[.CRYPTO._''ARCH']OPENSSLCONF.H" +$ OSCH_NAME = "SYS$DISK:[.CRYPTO.''ARCHD']OPENSSLCONF.H" $ CREATE /FDL=SYS$INPUT: 'OSCH_NAME' RECORD FORMAT stream_lf @@ -228,7 +244,7 @@ $ WRITE H_FILE "# define OPENSSL_SYS_VMS" $ WRITE H_FILE "#endif" $ $! One of the best way to figure out what the list should be is to do -$! the followin on a Unix system: +$! the following on a Unix system: $! grep OPENSSL_NO_ crypto/*/*.h ssl/*.h engines/*.h engines/*/*.h|grep ':# *if'|sed -e 's/^.*def //'|sort|uniq $! For that reason, the list will also always end up in alphabetical order $ CONFIG_LOGICALS := AES,- @@ -326,7 +342,7 @@ $ $! Architecture specific rule addtions $ IF ARCH .EQS. "VAX" $ THEN -$ ! Disable algorithms that require 64 bit integers in C +$ ! Disable algorithms that require 64-bit integers in C $ CONFIG_DISABLE_RULES = CONFIG_DISABLE_RULES + - ";/GOST" + - ";/WHIRLPOOL" @@ -355,7 +371,8 @@ $ $! Apply cascading disable rules $ CONFIG_DISABLE_I = 0 $ CONFIG_DISABLE_LOOP0: -$ CONFIG_DISABLE_E = F$EDIT(F$ELEMENT(CONFIG_DISABLE_I,";",CONFIG_DISABLE_RULES),"TRIM") +$ CONFIG_DISABLE_E = F$EDIT(F$ELEMENT(CONFIG_DISABLE_I,";", - + CONFIG_DISABLE_RULES),"TRIM") $ CONFIG_DISABLE_I = CONFIG_DISABLE_I + 1 $ IF CONFIG_DISABLE_E .EQS. "" THEN GOTO CONFIG_DISABLE_LOOP0 $ IF CONFIG_DISABLE_E .EQS. ";" THEN GOTO CONFIG_DISABLE_LOOP0_END @@ -365,7 +382,8 @@ $ CONFIG_DISABLE_DEPENDENTS = F$EDIT(F$ELEMENT(1,"/",CONFIG_DISABLE_E),"TRIM") $ TO_DISABLE := YES $ CONFIG_ALGO_I = 0 $ CONFIG_DISABLE_LOOP1: -$ CONFIG_ALGO_E = F$EDIT(F$ELEMENT(CONFIG_ALGO_I,",",CONFIG_DISABLE_ALGOS),"TRIM") +$ CONFIG_ALGO_E = F$EDIT(F$ELEMENT(CONFIG_ALGO_I,",", - + CONFIG_DISABLE_ALGOS),"TRIM") $ CONFIG_ALGO_I = CONFIG_ALGO_I + 1 $ IF CONFIG_ALGO_E .EQS. "" THEN GOTO CONFIG_DISABLE_LOOP1 $ IF CONFIG_ALGO_E .EQS. "," THEN GOTO CONFIG_DISABLE_LOOP1_END @@ -382,7 +400,8 @@ $ IF TO_DISABLE $ THEN $ CONFIG_DEPENDENT_I = 0 $ CONFIG_DISABLE_LOOP2: -$ CONFIG_DEPENDENT_E = F$EDIT(F$ELEMENT(CONFIG_DEPENDENT_I,",",CONFIG_DISABLE_DEPENDENTS),"TRIM") +$ CONFIG_DEPENDENT_E = F$EDIT(F$ELEMENT(CONFIG_DEPENDENT_I,",", - + CONFIG_DISABLE_DEPENDENTS),"TRIM") $ CONFIG_DEPENDENT_I = CONFIG_DEPENDENT_I + 1 $ IF CONFIG_DEPENDENT_E .EQS. "" THEN GOTO CONFIG_DISABLE_LOOP2 $ IF CONFIG_DEPENDENT_E .EQS. "," THEN GOTO CONFIG_DISABLE_LOOP2_END @@ -390,7 +409,8 @@ $ CONFIG_DISABLED_'CONFIG_DEPENDENT_E' := YES $ CONFIG_ENABLED_'CONFIG_DEPENDENT_E' := NO $ ! Better not to assume defaults at this point... $ CONFIG_CHANGED_'CONFIG_DEPENDENT_E' := YES -$ WRITE SYS$ERROR "''CONFIG_DEPENDENT_E' disabled by rule ''CONFIG_DISABLE_E'" +$ WRITE SYS$ERROR - + "''CONFIG_DEPENDENT_E' disabled by rule ''CONFIG_DISABLE_E'" $ GOTO CONFIG_DISABLE_LOOP2 $ CONFIG_DISABLE_LOOP2_END: $ ENDIF @@ -400,7 +420,8 @@ $ $! Apply cascading enable rules $ CONFIG_ENABLE_I = 0 $ CONFIG_ENABLE_LOOP0: -$ CONFIG_ENABLE_E = F$EDIT(F$ELEMENT(CONFIG_ENABLE_I,";",CONFIG_ENABLE_RULES),"TRIM") +$ CONFIG_ENABLE_E = F$EDIT(F$ELEMENT(CONFIG_ENABLE_I,";", - + CONFIG_ENABLE_RULES),"TRIM") $ CONFIG_ENABLE_I = CONFIG_ENABLE_I + 1 $ IF CONFIG_ENABLE_E .EQS. "" THEN GOTO CONFIG_ENABLE_LOOP0 $ IF CONFIG_ENABLE_E .EQS. ";" THEN GOTO CONFIG_ENABLE_LOOP0_END @@ -410,7 +431,8 @@ $ CONFIG_ENABLE_DEPENDENTS = F$EDIT(F$ELEMENT(1,"/",CONFIG_ENABLE_E),"TRIM") $ TO_ENABLE := YES $ CONFIG_ALGO_I = 0 $ CONFIG_ENABLE_LOOP1: -$ CONFIG_ALGO_E = F$EDIT(F$ELEMENT(CONFIG_ALGO_I,",",CONFIG_ENABLE_ALGOS),"TRIM") +$ CONFIG_ALGO_E = F$EDIT(F$ELEMENT(CONFIG_ALGO_I,",", - + CONFIG_ENABLE_ALGOS),"TRIM") $ CONFIG_ALGO_I = CONFIG_ALGO_I + 1 $ IF CONFIG_ALGO_E .EQS. "" THEN GOTO CONFIG_ENABLE_LOOP1 $ IF CONFIG_ALGO_E .EQS. "," THEN GOTO CONFIG_ENABLE_LOOP1_END @@ -427,7 +449,8 @@ $ IF TO_ENABLE $ THEN $ CONFIG_DEPENDENT_I = 0 $ CONFIG_ENABLE_LOOP2: -$ CONFIG_DEPENDENT_E = F$EDIT(F$ELEMENT(CONFIG_DEPENDENT_I,",",CONFIG_ENABLE_DEPENDENTS),"TRIM") +$ CONFIG_DEPENDENT_E = F$EDIT(F$ELEMENT(CONFIG_DEPENDENT_I,",", - + CONFIG_ENABLE_DEPENDENTS),"TRIM") $ CONFIG_DEPENDENT_I = CONFIG_DEPENDENT_I + 1 $ IF CONFIG_DEPENDENT_E .EQS. "" THEN GOTO CONFIG_ENABLE_LOOP2 $ IF CONFIG_DEPENDENT_E .EQS. "," THEN GOTO CONFIG_ENABLE_LOOP2_END @@ -435,7 +458,8 @@ $ CONFIG_DISABLED_'CONFIG_DEPENDENT_E' := NO $ CONFIG_ENABLED_'CONFIG_DEPENDENT_E' := YES $ ! Better not to assume defaults at this point... $ CONFIG_CHANGED_'CONFIG_DEPENDENT_E' := YES -$ WRITE SYS$ERROR "''CONFIG_DEPENDENT_E' enabled by rule ''CONFIG_ENABLE_E'" +$ WRITE SYS$ERROR - + "''CONFIG_DEPENDENT_E' enabled by rule ''CONFIG_ENABLE_E'" $ GOTO CONFIG_ENABLE_LOOP2 $ CONFIG_ENABLE_LOOP2_END: $ ENDIF @@ -465,6 +489,17 @@ $ ENDIF $ GOTO CONFIG_LOG_LOOP2 $ CONFIG_LOG_LOOP2_END: $! +$ WRITE H_FILE "" +$ WRITE H_FILE "/* 2011-02-23 SMS." +$ WRITE H_FILE " * On VMS (V8.3), setvbuf() doesn't support a 64-bit" +$ WRITE H_FILE " * ""in"" pointer, and the help says:" +$ WRITE H_FILE " * Please note that the previously documented" +$ WRITE H_FILE " * value _IONBF is not supported." +$ WRITE H_FILE " * So, skip it on VMS." +$ WRITE H_FILE " */" +$ WRITE H_FILE "#define OPENSSL_NO_SETVBUF_IONBF" +$ WRITE H_FILE "" +$! $! Add in the common "crypto/opensslconf.h.in". $! $ TYPE 'OPENSSLCONF_H_IN' /OUTPUT=H_FILE: @@ -557,7 +592,7 @@ $ CLOSE H_FILE $! $! Purge The [.CRYPTO._xxx]OPENSSLCONF.H file $! -$ PURGE SYS$DISK:[.CRYPTO._'ARCH']OPENSSLCONF.H +$ PURGE SYS$DISK:[.CRYPTO.'ARCHD']OPENSSLCONF.H $! $! That's All, Time To RETURN. $! @@ -569,11 +604,11 @@ $ BUILDINF: $! $! Tell The User We Are Creating The [.CRYPTO._xxx]BUILDINF.H File. $! -$ WRITE SYS$OUTPUT "Creating [.CRYPTO._''ARCH']BUILDINF.H Include File." +$ WRITE SYS$OUTPUT "Creating [.CRYPTO.''ARCHD']BUILDINF.H Include File." $! $! Create The [.CRYPTO._xxx]BUILDINF.H File. $! -$ BIH_NAME = "SYS$DISK:[.CRYPTO._''ARCH']BUILDINF.H" +$ BIH_NAME = "SYS$DISK:[.CRYPTO.''ARCHD']BUILDINF.H" $ CREATE /FDL=SYS$INPUT: 'BIH_NAME' RECORD FORMAT stream_lf @@ -586,8 +621,19 @@ $ TIME = F$TIME() $! $! Write The [.CRYPTO._xxx]BUILDINF.H File. $! -$ WRITE H_FILE "#define CFLAGS ""/POINTER_SIZE=''POINTER_SIZE'""" -$ WRITE H_FILE "#define PLATFORM ""VMS ''ARCH' ''VMS_VERSION'""" +$ CFLAGS = "" +$ if (POINTER_SIZE .nes. "") +$ then +$ CFLAGS = CFLAGS+ "/POINTER_SIZE=''POINTER_SIZE'" +$ endif +$ if (ZLIB .nes. "") +$ then +$ if (CFLAGS .nes. "") then CFLAGS = CFLAGS+ " " +$ CFLAGS = CFLAGS+ "/DEFINE=ZLIB" +$ endif +$! +$ WRITE H_FILE "#define CFLAGS ""''CFLAGS'""" +$ WRITE H_FILE "#define PLATFORM ""VMS ''ARCHD' ''VMS_VERSION'""" $ WRITE H_FILE "#define DATE ""''TIME'"" " $! $! Close The [.CRYPTO._xxx]BUILDINF.H File. @@ -596,7 +642,7 @@ $ CLOSE H_FILE $! $! Purge The [.CRYPTO._xxx]BUILDINF.H File. $! -$ PURGE SYS$DISK:[.CRYPTO._'ARCH']BUILDINF.H +$ PURGE SYS$DISK:[.CRYPTO.'ARCHD']BUILDINF.H $! $! Delete [.CRYPTO]BUILDINF.H File, as there might be some residue from Unix. $! @@ -611,44 +657,58 @@ $! Copy a lot of files around. $! $ SOFTLINKS: $! -$! Tell The User We Are Partly Rebuilding The [.APPS] Directory. -$! -$ WRITE SYS$OUTPUT "Rebuilding The '[.APPS]MD4.C' File." -$! -$ DELETE SYS$DISK:[.APPS]MD4.C;* -$! -$! Copy MD4.C from [.CRYPTO.MD4] into [.APPS] -$! -$ COPY SYS$DISK:[.CRYPTO.MD4]MD4.C SYS$DISK:[.APPS] -$! -$! Tell The User We Are Rebuilding The [.INCLUDE.OPENSSL] Directory. -$! -$ WRITE SYS$OUTPUT "Rebuilding The '[.INCLUDE.OPENSSL]' Directory." -$! -$! First, make sure the directory exists -$! -$ IF F$PARSE("SYS$DISK:[.INCLUDE.OPENSSL]") .EQS. "" THEN - - CREATE/DIRECTORY SYS$DISK:[.INCLUDE.OPENSSL] +$!!!! Tell The User We Are Partly Rebuilding The [.APPS] Directory. +$!!!! +$!!! WRITE SYS$OUTPUT "Rebuilding The '[.APPS]MD4.C' File." +$!!!! +$!!! DELETE SYS$DISK:[.APPS]MD4.C;* +$!!!! +$!!!! Copy MD4.C from [.CRYPTO.MD4] into [.APPS] +$!!!! +$!!! COPY SYS$DISK:[.CRYPTO.MD4]MD4.C SYS$DISK:[.APPS] +$! +$! Ensure that the [.include.openssl] directory contains a full set of +$! real header files. The distribution kit may have left real or fake +$! symlinks there. Rather than think about what's there, simply delete +$! the destination files (fake or real symlinks) before copying the real +$! header files in. (Copying a real header file onto a real symlink +$! merely duplicates the real header file at its source.) +$! +$! Tell The User We Are Rebuilding The [.include.openssl] Directory. +$! +$ WRITE SYS$OUTPUT "Rebuilding The '[.include.openssl]' Directory." +$! +$! First, make sure the directory exists. If it did exist, delete all +$! the existing header files (or fake or real symlinks). +$! +$ if f$parse( "sys$disk:[.include.openssl]") .eqs. "" +$ then +$ create /directory sys$disk:[.include.openssl] +$ else +$ delete sys$disk:[.include.openssl]*.h;* +$ endif $! $! Copy All The ".H" Files From The Main Directory. $! $ EXHEADER := e_os2.h -$ COPY 'EXHEADER' SYS$DISK:[.INCLUDE.OPENSSL] +$ copy 'exheader' sys$disk:[.include.openssl] $! $! Copy All The ".H" Files From The [.CRYPTO] Directory Tree. $! -$ SDIRS := ,- - _'ARCH',- - OBJECTS,- - MD2,MD4,MD5,SHA,MDC2,HMAC,RIPEMD,WHRLPOOL,- - DES,AES,RC2,RC4,RC5,IDEA,BF,CAST,CAMELLIA,SEED,MODES,- - BN,EC,RSA,DSA,ECDSA,DH,ECDH,DSO,ENGINE,- - BUFFER,BIO,STACK,LHASH,RAND,ERR,- - EVP,ASN1,PEM,X509,X509V3,CONF,TXT_DB,PKCS7,PKCS12,COMP,OCSP,UI,KRB5,- - STORE,CMS,PQUEUE,TS,JPAKE -$ EXHEADER_ := crypto.h,opensslv.h,ebcdic.h,symhacks.h,ossl_typ.h -$ EXHEADER__'ARCH' := opensslconf.h -$ EXHEADER_OBJECTS := objects.h,obj_mac.h +$ SDIRS := , - + 'ARCHD', - + OBJECTS, - + MD2, MD4, MD5, SHA, MDC2, HMAC, RIPEMD, WHRLPOOL, - + DES, AES, RC2, RC4, RC5, IDEA, BF, CAST, CAMELLIA, SEED, MODES, - + BN, EC, RSA, DSA, ECDSA, DH, ECDH, DSO, ENGINE, - + BUFFER, BIO, STACK, LHASH, RAND, ERR, - + EVP, ASN1, PEM, X509, X509V3, CONF, TXT_DB, PKCS7, PKCS12, - + COMP, OCSP, UI, KRB5, - + STORE, CMS, PQUEUE, TS, JPAKE +$! +$ EXHEADER_ := crypto.h, opensslv.h, ebcdic.h, symhacks.h, ossl_typ.h +$ EXHEADER_'ARCHD' := opensslconf.h +$ EXHEADER_OBJECTS := objects.h, obj_mac.h $ EXHEADER_MD2 := md2.h $ EXHEADER_MD4 := md4.h $ EXHEADER_MD5 := md5.h @@ -657,7 +717,7 @@ $ EXHEADER_MDC2 := mdc2.h $ EXHEADER_HMAC := hmac.h $ EXHEADER_RIPEMD := ripemd.h $ EXHEADER_WHRLPOOL := whrlpool.h -$ EXHEADER_DES := des.h,des_old.h +$ EXHEADER_DES := des.h, des_old.h $ EXHEADER_AES := aes.h $ EXHEADER_RC2 := rc2.h $ EXHEADER_RC4 := rc4.h @@ -679,66 +739,64 @@ $ EXHEADER_DSO := dso.h $ EXHEADER_ENGINE := engine.h $ EXHEADER_BUFFER := buffer.h $ EXHEADER_BIO := bio.h -$ EXHEADER_STACK := stack.h,safestack.h +$ EXHEADER_STACK := stack.h, safestack.h $ EXHEADER_LHASH := lhash.h $ EXHEADER_RAND := rand.h $ EXHEADER_ERR := err.h $ EXHEADER_EVP := evp.h -$ EXHEADER_ASN1 := asn1.h,asn1_mac.h,asn1t.h -$ EXHEADER_PEM := pem.h,pem2.h -$ EXHEADER_X509 := x509.h,x509_vfy.h +$ EXHEADER_ASN1 := asn1.h, asn1_mac.h, asn1t.h +$ EXHEADER_PEM := pem.h, pem2.h +$ EXHEADER_X509 := x509.h, x509_vfy.h $ EXHEADER_X509V3 := x509v3.h -$ EXHEADER_CONF := conf.h,conf_api.h +$ EXHEADER_CONF := conf.h, conf_api.h $ EXHEADER_TXT_DB := txt_db.h $ EXHEADER_PKCS7 := pkcs7.h $ EXHEADER_PKCS12 := pkcs12.h $ EXHEADER_COMP := comp.h $ EXHEADER_OCSP := ocsp.h -$ EXHEADER_UI := ui.h,ui_compat.h +$ EXHEADER_UI := ui.h, ui_compat.h $ EXHEADER_KRB5 := krb5_asn.h -$!EXHEADER_STORE := store.h,str_compat.h +$!!! EXHEADER_STORE := store.h, str_compat.h $ EXHEADER_STORE := store.h $ EXHEADER_CMS := cms.h $ EXHEADER_PQUEUE := pqueue.h $ EXHEADER_TS := ts.h $ EXHEADER_JPAKE := jpake.h -$ -$ I = 0 -$ LOOP_SDIRS: -$ D = F$EDIT(F$ELEMENT(I, ",", SDIRS),"TRIM") -$ I = I + 1 -$ IF D .EQS. "," THEN GOTO LOOP_SDIRS_END -$ tmp = EXHEADER_'D' -$ IF D .EQS. "" -$ THEN -$ COPY [.CRYPTO]'tmp' SYS$DISK:[.INCLUDE.OPENSSL] !/LOG -$ ELSE -$ COPY [.CRYPTO.'D']'tmp' SYS$DISK:[.INCLUDE.OPENSSL] !/LOG -$ ENDIF -$ GOTO LOOP_SDIRS -$ LOOP_SDIRS_END: +$! +$ i = 0 +$ loop_sdirs: +$ sdir = f$edit( f$element( i, ",", sdirs), "trim") +$ i = i + 1 +$ if (sdir .eqs. ",") then goto loop_sdirs_end +$ hdr_list = exheader_'sdir' +$ if (sdir .nes. "") then sdir = "."+ sdir +$ copy [.crypto'sdir']'hdr_list' sys$disk:[.include.openssl] +$ goto loop_sdirs +$ loop_sdirs_end: $! $! Copy All The ".H" Files From The [.SSL] Directory. $! -$ EXHEADER := ssl.h,ssl2.h,ssl3.h,ssl23.h,tls1.h,dtls1.h,kssl.h -$ COPY SYS$DISK:[.SSL]'EXHEADER' SYS$DISK:[.INCLUDE.OPENSSL] +$! (keep these in the same order as ssl/Makefile) +$ EXHEADER := ssl.h, ssl2.h, ssl3.h, ssl23.h, tls1.h, dtls1.h, kssl.h +$ copy sys$disk:[.ssl]'exheader' sys$disk:[.include.openssl] $! -$! Purge all doubles +$! Purge the [.include.openssl] header files. $! -$ PURGE SYS$DISK:[.INCLUDE.OPENSSL]*.H +$ purge sys$disk:[.include.openssl]*.h $! $! That's All, Time To RETURN. $! $ RETURN $! -$! Build The "[.xxx.EXE.CRYPTO]LIBCRYPTO''LIB32'.OLB" Library. +$! Build The "[.xxx.EXE.CRYPTO]SSL_LIBCRYPTO''LIB32'.OLB" Library. $! $ CRYPTO: $! $! Tell The User What We Are Doing. $! $ WRITE SYS$OUTPUT "" -$ WRITE SYS$OUTPUT "Building The [.",ARCH,".EXE.CRYPTO]LIBCRYPTO''LIB32'.OLB Library." +$ WRITE SYS$OUTPUT - + "Building The [.",ARCHD,".EXE.CRYPTO]SSL_LIBCRYPTO''LIB32'.OLB Library." $! $! Go To The [.CRYPTO] Directory. $! @@ -746,11 +804,13 @@ $ SET DEFAULT SYS$DISK:[.CRYPTO] $! $! Build The [.xxx.EXE.CRYPTO]LIBCRYPTO.OLB Library. $! -$ @CRYPTO-LIB LIBRARY 'DEBUGGER' "''COMPILER'" "''TCPIP_TYPE'" "''ISSEVEN'" "''BUILDPART'" "''POINTER_SIZE'" +$ @CRYPTO-LIB LIBRARY 'DEBUGGER' "''COMPILER'" "''TCPIP_TYPE'" - + "''ISSEVEN'" "''BUILDPART'" "''POINTER_SIZE'" "''ZLIB'" $! $! Build The [.xxx.EXE.CRYPTO]*.EXE Test Applications. $! -$ @CRYPTO-LIB APPS 'DEBUGGER' "''COMPILER'" "''TCPIP_TYPE'" "''ISSEVEN'" "''BUILDPART'" "''POINTER_SIZE'" +$ @CRYPTO-LIB APPS 'DEBUGGER' "''COMPILER'" "''TCPIP_TYPE'" - + "''ISSEVEN'" "''BUILDPART'" "''POINTER_SIZE'" "''ZLIB'" $! $! Go Back To The Main Directory. $! @@ -760,14 +820,15 @@ $! Time To RETURN. $! $ RETURN $! -$! Build The "[.xxx.EXE.SSL]LIBSSL''LIB32'.OLB" Library. +$! Build The "[.xxx.EXE.SSL]SSL_LIBSSL''LIB32'.OLB" Library. $! $ SSL: $! $! Tell The User What We Are Doing. $! $ WRITE SYS$OUTPUT "" -$ WRITE SYS$OUTPUT "Building The [.",ARCH,".EXE.SSL]LIBSSL''LIB32'.OLB Library." +$ WRITE SYS$OUTPUT - + "Building The [.",ARCHD,".EXE.SSL]SSL_LIBSSL''LIB32'.OLB Library." $! $! Go To The [.SSL] Directory. $! @@ -775,7 +836,8 @@ $ SET DEFAULT SYS$DISK:[.SSL] $! $! Build The [.xxx.EXE.SSL]LIBSSL.OLB Library. $! -$ @SSL-LIB LIBRARY 'DEBUGGER' "''COMPILER'" "''TCPIP_TYPE'" "''ISSEVEN'" "''POINTER_SIZE'" +$ @SSL-LIB LIBRARY 'DEBUGGER' "''COMPILER'" "''TCPIP_TYPE'" - + "''ISSEVEN'" "''POINTER_SIZE'" "''ZLIB'" $! $! Go Back To The Main Directory. $! @@ -792,7 +854,8 @@ $! $! Tell The User What We Are Doing. $! $ WRITE SYS$OUTPUT "" -$ WRITE SYS$OUTPUT "Building DECNet Based SSL Engine, [.",ARCH,".EXE.SSL]SSL_TASK.EXE" +$ WRITE SYS$OUTPUT - + "Building DECNet Based SSL Engine, [.",ARCHD,".EXE.SSL]SSL_TASK.EXE" $! $! Go To The [.SSL] Directory. $! @@ -800,7 +863,8 @@ $ SET DEFAULT SYS$DISK:[.SSL] $! $! Build The [.xxx.EXE.SSL]SSL_TASK.EXE $! -$ @SSL-LIB SSL_TASK 'DEBUGGER' "''COMPILER'" "''TCPIP_TYPE'" "''ISSEVEN'" "''POINTER_SIZE'" +$ @SSL-LIB SSL_TASK 'DEBUGGER' "''COMPILER'" "''TCPIP_TYPE'" - + "''ISSEVEN'" "''POINTER_SIZE'" "''ZLIB'" $! $! Go Back To The Main Directory. $! @@ -817,7 +881,7 @@ $! $! Tell The User What We Are Doing. $! $ WRITE SYS$OUTPUT "" -$ WRITE SYS$OUTPUT "Building The OpenSSL [.",ARCH,".EXE.TEST] Test Utilities." +$ WRITE SYS$OUTPUT "Building The OpenSSL [.",ARCHD,".EXE.TEST] Test Utilities." $! $! Go To The [.TEST] Directory. $! @@ -825,7 +889,8 @@ $ SET DEFAULT SYS$DISK:[.TEST] $! $! Build The Test Programs. $! -$ @MAKETESTS 'DEBUGGER' "''COMPILER'" "''TCPIP_TYPE'" "''ISSEVEN'" "''POINTER_SIZE'" +$ @MAKETESTS 'DEBUGGER' "''COMPILER'" "''TCPIP_TYPE'" "''ISSEVEN'" - + "''POINTER_SIZE'" "''ZLIB'" $! $! Go Back To The Main Directory. $! @@ -842,7 +907,7 @@ $! $! Tell The User What We Are Doing. $! $ WRITE SYS$OUTPUT "" -$ WRITE SYS$OUTPUT "Building OpenSSL [.",ARCH,".EXE.APPS] Applications." +$ WRITE SYS$OUTPUT "Building OpenSSL [.",ARCHD,".EXE.APPS] Applications." $! $! Go To The [.APPS] Directory. $! @@ -850,7 +915,8 @@ $ SET DEFAULT SYS$DISK:[.APPS] $! $! Build The Application Programs. $! -$ @MAKEAPPS 'DEBUGGER' "''COMPILER'" "''TCPIP_TYPE'" "''ISSEVEN'" "" "''POINTER_SIZE'" +$ @MAKEAPPS 'DEBUGGER' "''COMPILER'" "''TCPIP_TYPE'" "''ISSEVEN'" - + "" "''POINTER_SIZE'" "''ZLIB'" $! $! Go Back To The Main Directory. $! @@ -867,7 +933,7 @@ $! $! Tell The User What We Are Doing. $! $ WRITE SYS$OUTPUT "" -$ WRITE SYS$OUTPUT "Building OpenSSL [.",ARCH,".EXE.ENGINES] Engines." +$ WRITE SYS$OUTPUT "Building OpenSSL [.",ARCHD,".EXE.ENGINES] Engines." $! $! Go To The [.ENGINES] Directory. $! @@ -875,7 +941,8 @@ $ SET DEFAULT SYS$DISK:[.ENGINES] $! $! Build The Application Programs. $! -$ @MAKEENGINES ENGINES 'DEBUGGER' "''COMPILER'" "''TCPIP_TYPE'" "''ISSEVEN'" "''BUILDPART'" "''POINTER_SIZE'" +$ @MAKEENGINES ENGINES 'DEBUGGER' "''COMPILER'" "''TCPIP_TYPE'" - + "''ISSEVEN'" "''BUILDPART'" "''POINTER_SIZE'" "''ZLIB'" $! $! Go Back To The Main Directory. $! @@ -954,8 +1021,8 @@ $ WRITE SYS$OUTPUT " ENGINES : To Build Just The ENGINES" $ WRITE SYS$OUTPUT "" $ WRITE SYS$OUTPUT " Where 'xxx' Stands For:" $ WRITE SYS$OUTPUT "" -$ WRITE SYS$OUTPUT " ALPHA : Alpha Architecture." -$ WRITE SYS$OUTPUT " IA64 : IA64 Architecture." +$ WRITE SYS$OUTPUT " ALPHA[64]: Alpha Architecture." +$ WRITE SYS$OUTPUT " IA64[64] : IA64 Architecture." $ WRITE SYS$OUTPUT " VAX : VAX Architecture." $ WRITE SYS$OUTPUT "" $! @@ -971,55 +1038,51 @@ $! End The P1 Check. $! $ ENDIF $! -$! Check To See If P2 Is Blank. +$! Check P2 (POINTER_SIZE). $! -$ IF (P2.EQS."") +$ IF (P2 .NES. "") .AND. (ARCH .NES. "VAX") $ THEN -$ POINTER_SIZE = "" -$ ELSE -$! -$! Check is P2 Is Valid $! -$ IF (P2.EQS."32") +$ IF (P2 .EQS. "32") $ THEN $ POINTER_SIZE = "32" -$ IF ARCH .EQS. "VAX" -$ THEN -$ LIB32 = "" -$ ELSE -$ LIB32 = "32" -$ ENDIF $ ELSE -$ IF (P2.EQS."64") +$ POINTER_SIZE = F$EDIT( P2, "COLLAPSE, UPCASE") +$ IF ((POINTER_SIZE .EQS. "64") .OR. - + (POINTER_SIZE .EQS. "64=") .OR. - + (POINTER_SIZE .EQS. "64=ARGV")) $ THEN +$ ARCHD = ARCH+ "_64" $ LIB32 = "" -$ IF ARCH .EQS. "VAX" -$ THEN -$ POINTER_SIZE = "32" -$ ELSE -$ POINTER_SIZE = "64" -$ ENDIF $ ELSE $! -$! Tell The User Entered An Invalid Option.. +$! Tell The User Entered An Invalid Option. $! $ WRITE SYS$OUTPUT "" -$ WRITE SYS$OUTPUT "The Option ",P2," Is Invalid. The Valid Options Are:" +$ WRITE SYS$OUTPUT "The Option ", P2, - + " Is Invalid. The Valid Options Are:" $ WRITE SYS$OUTPUT "" -$ WRITE SYS$OUTPUT " 32 : Compile with 32 bit pointer size" -$ WRITE SYS$OUTPUT " 64 : Compile with 64 bit pointer size" +$ WRITE SYS$OUTPUT - + " """" : Compile with default (short) pointers." +$ WRITE SYS$OUTPUT - + " 32 : Compile with 32-bit (short) pointers." +$ WRITE SYS$OUTPUT - + " 64 : Compile with 64-bit (long) pointers (auto ARGV)." +$ WRITE SYS$OUTPUT - + " 64= : Compile with 64-bit (long) pointers (no ARGV)." +$ WRITE SYS$OUTPUT - + " 64=ARGV : Compile with 64-bit (long) pointers (ARGV)." $ WRITE SYS$OUTPUT "" -$! +$! $! Time To EXIT. $! $ GOTO TIDY $! -$! End The Valid Arguement Check. -$! $ ENDIF +$! $ ENDIF $! -$! End The P2 Check. +$! End The P2 (POINTER_SIZE) Check. $! $ ENDIF $! @@ -1049,7 +1112,7 @@ $! Else... $! $ ELSE $! -$! Tell The User Entered An Invalid Option.. +$! Tell The User Entered An Invalid Option. $! $ WRITE SYS$OUTPUT "" $ WRITE SYS$OUTPUT "The Option ",P3," Is Invalid. The Valid Options Are:" @@ -1128,7 +1191,7 @@ $! Else... $! $ ELSE $! -$! Check To See If The User Entered A Valid Paramter. +$! Check To See If The User Entered A Valid Parameter. $! $ IF (P4.EQS."VAXC").OR.(P4.EQS."DECC").OR.(P4.EQS."GNUC")!.OR.(P4.EQS."LINK") $ THEN @@ -1227,7 +1290,8 @@ $! End The P4 Check. $! $ ENDIF $! -$! Time to check the contents of P5, and to make sure we get the correct library. +$! Time to check the contents of P5, and to make sure we get the correct +$! library. $! $ IF P5.EQS."SOCKETSHR" .OR. P5.EQS."MULTINET" .OR. P5.EQS."UCX" - .OR. P5.EQS."TCPIP" .OR. P5.EQS."NONE" @@ -1240,7 +1304,7 @@ $ THEN $! $! Set the library to use SOCKETSHR $! -$ TCPIP_LIB = "SYS$DISK:[-.VMS]SOCKETSHR_SHR.OPT/OPT" +$ TCPIP_LIB = "SYS$DISK:[-.VMS]SOCKETSHR_SHR.OPT /OPTIONS" $! $! Tell the user $! @@ -1274,7 +1338,7 @@ $ THEN $! $! Set the library to use UCX. $! -$ TCPIP_LIB = "SYS$DISK:[-.VMS]UCX_SHR_DECC.OPT/OPT" +$ TCPIP_LIB = "SYS$DISK:[-.VMS]UCX_SHR_DECC.OPT /OPTIONS" $! $! Tell the user $! @@ -1291,7 +1355,7 @@ $ THEN $! $! Set the library to use TCPIP (post UCX). $! -$ TCPIP_LIB = "SYS$DISK:[-.VMS]TCPIP_SHR_DECC.OPT/OPT" +$ TCPIP_LIB = "SYS$DISK:[-.VMS]TCPIP_SHR_DECC.OPT /OPTIONS" $! $! Tell the user $! @@ -1401,11 +1465,69 @@ $! End The P6 Check. $! $ ENDIF $! +$! +$! Check To See If We Have A ZLIB Option. +$! +$ ZLIB = P7 +$ IF (ZLIB .NES. "") +$ THEN +$! +$! Check for expected ZLIB files. +$! +$ err = 0 +$ file1 = f$parse( "zlib.h", ZLIB, , , "SYNTAX_ONLY") +$ if (f$search( file1) .eqs. "") +$ then +$ WRITE SYS$OUTPUT "" +$ WRITE SYS$OUTPUT "The Option ", ZLIB, " Is Invalid." +$ WRITE SYS$OUTPUT " Can't find header: ''file1'" +$ err = 1 +$ endif +$! +$ file2 = f$parse( ZLIB, "libz.olb", , , "SYNTAX_ONLY") +$ if (f$search( file2) .eqs. "") +$ then +$ if (err .eq. 0) +$ then +$ WRITE SYS$OUTPUT "" +$ WRITE SYS$OUTPUT "The Option ", ZLIB, " Is Invalid." +$ endif +$ WRITE SYS$OUTPUT " Can't find library: ''file2'" +$ WRITE SYS$OUTPUT "" +$ err = err+ 2 +$ endif +$ if (err .eq. 1) +$ then +$ WRITE SYS$OUTPUT "" +$ endif +$! +$ if (err .ne. 0) +$ then +$ GOTO TIDY +$ endif +$! +$! Print info +$! +$ WRITE SYS$OUTPUT "ZLIB library spec: ", file2 +$! +$! End The ZLIB Check. +$! +$ ENDIF +$! $! Time To RETURN... $! $ RETURN $! $ TIDY: +$! +$! Close any open files. +$! +$ if (f$trnlnm( "h_file", "LNM$PROCESS", 0, "SUPERVISOR") .nes. "") then - + close h_file +$! +$! Restore the original default device:[directory]. +$! $ SET DEFAULT 'DEF_ORIG' +$! $ EXIT $! |