aboutsummaryrefslogtreecommitdiff
path: root/openssl/makevms.com
diff options
context:
space:
mode:
Diffstat (limited to 'openssl/makevms.com')
-rw-r--r--openssl/makevms.com2765
1 files changed, 1411 insertions, 1354 deletions
diff --git a/openssl/makevms.com b/openssl/makevms.com
index 20211b73b..fe8271405 100644
--- a/openssl/makevms.com
+++ b/openssl/makevms.com
@@ -1,1354 +1,1411 @@
-$!
-$! MAKEVMS.COM
-$! Original Author: UNKNOWN
-$! Rewritten By: Robert Byer
-$! Vice-President
-$! A-Com Computing, Inc.
-$! byer@mail.all-net.net
-$!
-$! Changes by Richard Levitte <richard@levitte.org>
-$! Zoltan Arpadffy <zoli@polarhome.com>
-$!
-$! This procedure creates the SSL libraries of "[.xxx.EXE.CRYPTO]LIBCRYPTO.OLB"
-$! "[.xxx.EXE.SSL]LIBSSL.OLB"
-$! The "xxx" denotes the machine architecture of ALPHA, IA64 or VAX.
-$!
-$! This procedures accepts two command line options listed below.
-$!
-$! Specify one of the following build options for P1.
-$!
-$! ALL Just build "everything".
-$! CONFIG Just build the "[.CRYPTO._xxx]OPENSSLCONF.H" file.
-$! BUILDINF Just build the "[.CRYPTO._xxx]BUILDINF.H" file.
-$! SOFTLINKS Just fix the Unix soft links.
-$! BUILDALL Same as ALL, except CONFIG, BUILDINF and SOFTILNKS aren't done.
-$! CRYPTO Just build the "[.xxx.EXE.CRYPTO]LIBCRYPTO.OLB" library.
-$! CRYPTO/x Just build the x part of the
-$! "[.xxx.EXE.CRYPTO]LIBCRYPTO.OLB" library.
-$! SSL Just build the "[.xxx.EXE.SSL]LIBSSL.OLB" library.
-$! SSL_TASK Just build the "[.xxx.EXE.SSL]SSL_TASK.EXE" program.
-$! TEST Just build the "[.xxx.EXE.TEST]" test programs for OpenSSL.
-$! APPS Just build the "[.xxx.EXE.APPS]" application programs for OpenSSL.
-$! ENGINES Just build the "[.xxx.EXE.ENGINES]" application programs for OpenSSL.
-$!
-$!
-$! P2 is ignored (it was used to denote if RSAref should be used or not,
-$! and is simply kept so surrounding scripts don't get confused)
-$!
-$! Specify DEBUG or NODEBUG as P3 to compile with or without debugging
-$! information.
-$!
-$! Specify which compiler as P4 to try to compile under.
-$!
-$! VAXC For VAX C.
-$! DECC For DEC C.
-$! GNUC For GNU C.
-$! LINK To only link the programs from existing object files.
-$! (not yet implemented)
-$!
-$! If you don't specify a compiler, it will try to determine which
-$! "C" compiler to use.
-$!
-$! P5, if defined, sets a TCP/IP library to use, through one of the following
-$! keywords:
-$!
-$! UCX for UCX or UCX emulation
-$! TCPIP for TCP/IP Services or TCP/IP Services emulation
-$! (this is prefered over UCX)
-$! SOCKETSHR for SOCKETSHR+NETLIB
-$! NONE to avoid specifying which TCP/IP implementation to
-$! use at build time (this works with DEC C). This is
-$! the default.
-$!
-$! P6, if defined, sets a compiler thread NOT needed on OpenVMS 7.1 (and up)
-$!
-$!
-$ DEF_ORIG = F$ENVIRONMENT( "DEFAULT")
-$ ON ERROR THEN GOTO TIDY
-$ ON CONTROL_C THEN GOTO TIDY
-$!
-$! Check if we're in a batch job, and make sure we get to
-$! the directory this script is in
-$!
-$ IF F$MODE() .EQS. "BATCH"
-$ THEN
-$ COMNAME=F$ENVIRONMENT("PROCEDURE")
-$ COMPATH=F$PARSE("A.;",COMNAME) - "A.;"
-$ SET DEF 'COMPATH'
-$ ENDIF
-$!
-$! Check What Architecture We Are Using.
-$!
-$ IF (F$GETSYI("CPU").LT.128)
-$ THEN
-$!
-$! The Architecture Is VAX.
-$!
-$ ARCH = "VAX"
-$!
-$! Else...
-$!
-$ ELSE
-$!
-$! The Architecture Is Alpha, IA64 or whatever comes in the future.
-$!
-$ ARCH = F$EDIT( F$GETSYI( "ARCH_NAME"), "UPCASE")
-$ IF (ARCH .EQS. "") THEN ARCH = "UNK"
-$!
-$! End The Architecture Check.
-$!
-$ ENDIF
-$!
-$! Get VMS version.
-$!
-$ VMS_VERSION = f$edit( f$getsyi( "VERSION"), "TRIM")
-$!
-$! Check To Make Sure We Have Valid Command Line Parameters.
-$!
-$ GOSUB CHECK_OPTIONS
-$!
-$! Check To See What We Are To Do.
-$!
-$ IF (BUILDCOMMAND.EQS."ALL")
-$ THEN
-$!
-$! Start with building the OpenSSL configuration file.
-$!
-$ GOSUB CONFIG
-$!
-$! Create The "BUILDINF.H" Include File.
-$!
-$ GOSUB BUILDINF
-$!
-$! Fix The Unix Softlinks.
-$!
-$ GOSUB SOFTLINKS
-$!
-$ ENDIF
-$!
-$ IF (BUILDCOMMAND.EQS."ALL".OR.BUILDCOMMAND.EQS."BUILDALL")
-$ THEN
-$!
-$! Build The [.xxx.EXE.CRYPTO]LIBCRYPTO.OLB Library.
-$!
-$ GOSUB CRYPTO
-$!
-$! Build The [.xxx.EXE.SSL]LIBSSL.OLB Library.
-$!
-$ GOSUB SSL
-$!
-$! Build The [.xxx.EXE.SSL]SSL_TASK.EXE DECNet SSL Engine.
-$!
-$ GOSUB SSL_TASK
-$!
-$! Build The [.xxx.EXE.TEST] OpenSSL Test Utilities.
-$!
-$ GOSUB TEST
-$!
-$! Build The [.xxx.EXE.APPS] OpenSSL Application Utilities.
-$!
-$ GOSUB APPS
-$!
-$! Build The [.xxx.EXE.ENGINES] OpenSSL Shareable Engines.
-$!
-$ GOSUB ENGINES
-$!
-$! Else...
-$!
-$ ELSE
-$!
-$! Build Just What The User Wants Us To Build.
-$!
-$ GOSUB 'BUILDCOMMAND'
-$!
-$ ENDIF
-$!
-$! Time To EXIT.
-$!
-$ GOTO TIDY
-$!
-$! Rebuild The [.CRYPTO._xxx]OPENSSLCONF.H" file.
-$!
-$ CONFIG:
-$!
-$! Tell The User We Are Creating The [.CRYPTO._xxx]OPENSSLCONF.H File.
-$!
-$ WRITE SYS$OUTPUT "Creating [.CRYPTO._''ARCH']OPENSSLCONF.H Include File."
-$!
-$! First, make sure the directory exists.
-$!
-$ IF F$PARSE("SYS$DISK:[.CRYPTO._''ARCH']") .EQS. "" THEN -
- CREATE/DIRECTORY SYS$DISK:[.CRYPTO._'ARCH']
-$!
-$! Different tar/UnZip versions/option may have named the file differently
-$ IF F$SEARCH("[.crypto]opensslconf.h_in") .NES. ""
-$ THEN
-$ OPENSSLCONF_H_IN = "[.crypto]opensslconf.h_in"
-$ ELSE
-$ IF F$SEARCH( "[.crypto]opensslconf_h.in") .NES. ""
-$ THEN
-$ OPENSSLCONF_H_IN = "[.crypto]opensslconf_h.in"
-$ ELSE
-$ ! For ODS-5
-$ IF F$SEARCH( "[.crypto]opensslconf.h.in") .NES. ""
-$ THEN
-$ OPENSSLCONF_H_IN = "[.crypto]opensslconf.h.in"
-$ ELSE
-$ WRITE SYS$ERROR "Couldn't find a [.crypto]opensslconf.h.in. Exiting!"
-$ $STATUS = %X00018294 ! "%RMS-F-FNF, file not found".
-$ GOTO TIDY
-$ ENDIF
-$ ENDIF
-$ ENDIF
-$!
-$! Create The [.CRYPTO._xxx]OPENSSLCONF.H File.
-$! Make sure it has the right format.
-$!
-$ OSCH_NAME = "SYS$DISK:[.CRYPTO._''ARCH']OPENSSLCONF.H"
-$ CREATE /FDL=SYS$INPUT: 'OSCH_NAME'
-RECORD
- FORMAT stream_lf
-$ OPEN /APPEND H_FILE 'OSCH_NAME'
-$!
-$! Write The [.CRYPTO._xxx]OPENSSLCONF.H File.
-$!
-$ WRITE H_FILE "/* This file was automatically built using makevms.com */"
-$ WRITE H_FILE "/* and ''OPENSSLCONF_H_IN' */"
-$!
-$! Write a few macros that indicate how this system was built.
-$!
-$ WRITE H_FILE ""
-$ WRITE H_FILE "#ifndef OPENSSL_SYS_VMS"
-$ WRITE H_FILE "# define OPENSSL_SYS_VMS"
-$ WRITE H_FILE "#endif"
-$
-$! One of the best way to figure out what the list should be is to do
-$! the followin on a Unix system:
-$! grep OPENSSL_NO_ crypto/*/*.h ssl/*.h engines/*.h engines/*/*.h|grep ':# *if'|sed -e 's/^.*def //'|sort|uniq
-$! For that reason, the list will also always end up in alphabetical order
-$ CONFIG_LOGICALS := AES,-
- ASM,INLINE_ASM,-
- BF,-
- BIO,-
- BUFFER,-
- BUF_FREELISTS,-
- CAMELLIA,-
- CAST,-
- CMS,-
- COMP,-
- DEPRECATED,-
- DES,-
- DGRAM,-
- DH,-
- DSA,-
- EC,-
- ECDH,-
- ECDSA,-
- ENGINE,-
- ERR,-
- EVP,-
- FP_API,-
- GMP,-
- GOST,-
- HASH_COMP,-
- HMAC,-
- IDEA,-
- JPAKE,-
- KRB5,-
- LHASH,-
- MD2,-
- MD4,-
- MD5,-
- MDC2,-
- OCSP,-
- PSK,-
- RC2,-
- RC4,-
- RC5,-
- RFC3779,-
- RIPEMD,-
- RSA,-
- SEED,-
- SHA,-
- SHA0,-
- SHA1,-
- SHA256,-
- SHA512,-
- SOCK,-
- SSL2,-
- STACK,-
- STATIC_ENGINE,-
- STDIO,-
- STORE,-
- TLSEXT,-
- WHIRLPOOL,-
- X509
-$! Add a few that we know about
-$ CONFIG_LOGICALS := 'CONFIG_LOGICALS',-
- THREADS
-$! The following rules, which dictate how some algorithm choices affect
-$! others, are picked from Configure.
-$! Quick syntax:
-$! list = item[ ; list]
-$! item = algos / dependents
-$! algos = algo [, algos]
-$! dependents = dependent [, dependents]
-$! When a list of algos is specified in one item, it means that they must
-$! all be disabled for the rule to apply.
-$! When a list of dependents is specified in one item, it means that they
-$! will all be disabled if the rule applies.
-$! Rules are checked sequentially. If a rule disables an algorithm, it will
-$! affect all following rules that depend on that algorithm being disabled.
-$! To force something to be enabled or disabled, have no algorithms in the
-$! algos part.
-$ CONFIG_DISABLE_RULES := RIJNDAEL/AES;-
- DES/MDC2;-
- EC/ECDSA,ECDH;-
- MD5/SSL2,SSL3,TLS1;-
- SHA/SSL3,TLS1;-
- RSA/SSL2;-
- RSA,DSA/SSL2;-
- DH/SSL3,TLS1;-
- TLS1/TLSEXT;-
- EC/GOST;-
- DSA/GOST;-
- DH/GOST;-
- /STATIC_ENGINE;-
- /KRB5
-$ CONFIG_ENABLE_RULES := ZLIB_DYNAMIC/ZLIB;-
- /THREADS
-$
-$! Architecture specific rule addtions
-$ IF ARCH .EQS. "VAX"
-$ THEN
-$ ! Disable algorithms that require 64 bit integers in C
-$ CONFIG_DISABLE_RULES = CONFIG_DISABLE_RULES + -
- ";/GOST" + -
- ";/WHIRLPOOL"
-$ ENDIF
-$
-$ CONFIG_LOG_I = 0
-$ CONFIG_LOG_LOOP1:
-$ CONFIG_LOG_E = F$EDIT(F$ELEMENT(CONFIG_LOG_I,",",CONFIG_LOGICALS),"TRIM")
-$ CONFIG_LOG_I = CONFIG_LOG_I + 1
-$ IF CONFIG_LOG_E .EQS. "" THEN GOTO CONFIG_LOG_LOOP1
-$ IF CONFIG_LOG_E .EQS. "," THEN GOTO CONFIG_LOG_LOOP1_END
-$ IF F$TRNLNM("OPENSSL_NO_"+CONFIG_LOG_E)
-$ THEN
-$ CONFIG_DISABLED_'CONFIG_LOG_E' := YES
-$ CONFIG_ENABLED_'CONFIG_LOG_E' := NO
-$ CONFIG_CHANGED_'CONFIG_LOG_E' := YES
-$ ELSE
-$ CONFIG_DISABLED_'CONFIG_LOG_E' := NO
-$ CONFIG_ENABLED_'CONFIG_LOG_E' := YES
-$ ! Because all algorithms are assumed enabled by default
-$ CONFIG_CHANGED_'CONFIG_LOG_E' := NO
-$ ENDIF
-$ GOTO CONFIG_LOG_LOOP1
-$ CONFIG_LOG_LOOP1_END:
-$
-$! Apply cascading disable rules
-$ CONFIG_DISABLE_I = 0
-$ CONFIG_DISABLE_LOOP0:
-$ CONFIG_DISABLE_E = F$EDIT(F$ELEMENT(CONFIG_DISABLE_I,";",CONFIG_DISABLE_RULES),"TRIM")
-$ CONFIG_DISABLE_I = CONFIG_DISABLE_I + 1
-$ IF CONFIG_DISABLE_E .EQS. "" THEN GOTO CONFIG_DISABLE_LOOP0
-$ IF CONFIG_DISABLE_E .EQS. ";" THEN GOTO CONFIG_DISABLE_LOOP0_END
-$
-$ CONFIG_DISABLE_ALGOS = F$EDIT(F$ELEMENT(0,"/",CONFIG_DISABLE_E),"TRIM")
-$ CONFIG_DISABLE_DEPENDENTS = F$EDIT(F$ELEMENT(1,"/",CONFIG_DISABLE_E),"TRIM")
-$ TO_DISABLE := YES
-$ CONFIG_ALGO_I = 0
-$ CONFIG_DISABLE_LOOP1:
-$ CONFIG_ALGO_E = F$EDIT(F$ELEMENT(CONFIG_ALGO_I,",",CONFIG_DISABLE_ALGOS),"TRIM")
-$ CONFIG_ALGO_I = CONFIG_ALGO_I + 1
-$ IF CONFIG_ALGO_E .EQS. "" THEN GOTO CONFIG_DISABLE_LOOP1
-$ IF CONFIG_ALGO_E .EQS. "," THEN GOTO CONFIG_DISABLE_LOOP1_END
-$ IF F$TYPE(CONFIG_DISABLED_'CONFIG_ALGO_E') .EQS. ""
-$ THEN
-$ TO_DISABLE := NO
-$ ELSE
-$ IF .NOT. CONFIG_DISABLED_'CONFIG_ALGO_E' THEN TO_DISABLE := NO
-$ ENDIF
-$ GOTO CONFIG_DISABLE_LOOP1
-$ CONFIG_DISABLE_LOOP1_END:
-$
-$ IF TO_DISABLE
-$ THEN
-$ CONFIG_DEPENDENT_I = 0
-$ CONFIG_DISABLE_LOOP2:
-$ CONFIG_DEPENDENT_E = F$EDIT(F$ELEMENT(CONFIG_DEPENDENT_I,",",CONFIG_DISABLE_DEPENDENTS),"TRIM")
-$ CONFIG_DEPENDENT_I = CONFIG_DEPENDENT_I + 1
-$ IF CONFIG_DEPENDENT_E .EQS. "" THEN GOTO CONFIG_DISABLE_LOOP2
-$ IF CONFIG_DEPENDENT_E .EQS. "," THEN GOTO CONFIG_DISABLE_LOOP2_END
-$ CONFIG_DISABLED_'CONFIG_DEPENDENT_E' := YES
-$ CONFIG_ENABLED_'CONFIG_DEPENDENT_E' := NO
-$ ! Better not to assume defaults at this point...
-$ CONFIG_CHANGED_'CONFIG_DEPENDENT_E' := YES
-$ WRITE SYS$ERROR "''CONFIG_DEPENDENT_E' disabled by rule ''CONFIG_DISABLE_E'"
-$ GOTO CONFIG_DISABLE_LOOP2
-$ CONFIG_DISABLE_LOOP2_END:
-$ ENDIF
-$ GOTO CONFIG_DISABLE_LOOP0
-$ CONFIG_DISABLE_LOOP0_END:
-$
-$! Apply cascading enable rules
-$ CONFIG_ENABLE_I = 0
-$ CONFIG_ENABLE_LOOP0:
-$ CONFIG_ENABLE_E = F$EDIT(F$ELEMENT(CONFIG_ENABLE_I,";",CONFIG_ENABLE_RULES),"TRIM")
-$ CONFIG_ENABLE_I = CONFIG_ENABLE_I + 1
-$ IF CONFIG_ENABLE_E .EQS. "" THEN GOTO CONFIG_ENABLE_LOOP0
-$ IF CONFIG_ENABLE_E .EQS. ";" THEN GOTO CONFIG_ENABLE_LOOP0_END
-$
-$ CONFIG_ENABLE_ALGOS = F$EDIT(F$ELEMENT(0,"/",CONFIG_ENABLE_E),"TRIM")
-$ CONFIG_ENABLE_DEPENDENTS = F$EDIT(F$ELEMENT(1,"/",CONFIG_ENABLE_E),"TRIM")
-$ TO_ENABLE := YES
-$ CONFIG_ALGO_I = 0
-$ CONFIG_ENABLE_LOOP1:
-$ CONFIG_ALGO_E = F$EDIT(F$ELEMENT(CONFIG_ALGO_I,",",CONFIG_ENABLE_ALGOS),"TRIM")
-$ CONFIG_ALGO_I = CONFIG_ALGO_I + 1
-$ IF CONFIG_ALGO_E .EQS. "" THEN GOTO CONFIG_ENABLE_LOOP1
-$ IF CONFIG_ALGO_E .EQS. "," THEN GOTO CONFIG_ENABLE_LOOP1_END
-$ IF F$TYPE(CONFIG_ENABLED_'CONFIG_ALGO_E') .EQS. ""
-$ THEN
-$ TO_ENABLE := NO
-$ ELSE
-$ IF .NOT. CONFIG_ENABLED_'CONFIG_ALGO_E' THEN TO_ENABLE := NO
-$ ENDIF
-$ GOTO CONFIG_ENABLE_LOOP1
-$ CONFIG_ENABLE_LOOP1_END:
-$
-$ IF TO_ENABLE
-$ THEN
-$ CONFIG_DEPENDENT_I = 0
-$ CONFIG_ENABLE_LOOP2:
-$ CONFIG_DEPENDENT_E = F$EDIT(F$ELEMENT(CONFIG_DEPENDENT_I,",",CONFIG_ENABLE_DEPENDENTS),"TRIM")
-$ CONFIG_DEPENDENT_I = CONFIG_DEPENDENT_I + 1
-$ IF CONFIG_DEPENDENT_E .EQS. "" THEN GOTO CONFIG_ENABLE_LOOP2
-$ IF CONFIG_DEPENDENT_E .EQS. "," THEN GOTO CONFIG_ENABLE_LOOP2_END
-$ CONFIG_DISABLED_'CONFIG_DEPENDENT_E' := NO
-$ CONFIG_ENABLED_'CONFIG_DEPENDENT_E' := YES
-$ ! Better not to assume defaults at this point...
-$ CONFIG_CHANGED_'CONFIG_DEPENDENT_E' := YES
-$ WRITE SYS$ERROR "''CONFIG_DEPENDENT_E' enabled by rule ''CONFIG_ENABLE_E'"
-$ GOTO CONFIG_ENABLE_LOOP2
-$ CONFIG_ENABLE_LOOP2_END:
-$ ENDIF
-$ GOTO CONFIG_ENABLE_LOOP0
-$ CONFIG_ENABLE_LOOP0_END:
-$
-$! Write to the configuration
-$ CONFIG_LOG_I = 0
-$ CONFIG_LOG_LOOP2:
-$ CONFIG_LOG_E = F$EDIT(F$ELEMENT(CONFIG_LOG_I,",",CONFIG_LOGICALS),"TRIM")
-$ CONFIG_LOG_I = CONFIG_LOG_I + 1
-$ IF CONFIG_LOG_E .EQS. "" THEN GOTO CONFIG_LOG_LOOP2
-$ IF CONFIG_LOG_E .EQS. "," THEN GOTO CONFIG_LOG_LOOP2_END
-$ IF CONFIG_CHANGED_'CONFIG_LOG_E'
-$ THEN
-$ IF CONFIG_DISABLED_'CONFIG_LOG_E'
-$ THEN
-$ WRITE H_FILE "#ifndef OPENSSL_NO_",CONFIG_LOG_E
-$ WRITE H_FILE "# define OPENSSL_NO_",CONFIG_LOG_E
-$ WRITE H_FILE "#endif"
-$ ELSE
-$ WRITE H_FILE "#ifndef OPENSSL_",CONFIG_LOG_E
-$ WRITE H_FILE "# define OPENSSL_",CONFIG_LOG_E
-$ WRITE H_FILE "#endif"
-$ ENDIF
-$ ENDIF
-$ GOTO CONFIG_LOG_LOOP2
-$ CONFIG_LOG_LOOP2_END:
-$!
-$! Add in the common "crypto/opensslconf.h.in".
-$!
-$ TYPE 'OPENSSLCONF_H_IN' /OUTPUT=H_FILE:
-$!
-$ IF ARCH .NES. "VAX"
-$ THEN
-$!
-$! Write the non-VAX specific data
-$!
-$ WRITE H_FILE "#if defined(HEADER_RC4_H)"
-$ WRITE H_FILE "#undef RC4_INT"
-$ WRITE H_FILE "#define RC4_INT unsigned int"
-$ WRITE H_FILE "#undef RC4_CHUNK"
-$ WRITE H_FILE "#define RC4_CHUNK unsigned long long"
-$ WRITE H_FILE "#endif"
-$!
-$ WRITE H_FILE "#if defined(HEADER_DES_LOCL_H)"
-$ WRITE H_FILE "#undef DES_LONG"
-$ WRITE H_FILE "#define DES_LONG unsigned int"
-$ WRITE H_FILE "#undef DES_PTR"
-$ WRITE H_FILE "#define DES_PTR"
-$ WRITE H_FILE "#undef DES_RISC1"
-$ WRITE H_FILE "#undef DES_RISC2"
-$ WRITE H_FILE "#define DES_RISC1"
-$ WRITE H_FILE "#undef DES_UNROLL"
-$ WRITE H_FILE "#define DES_UNROLL"
-$ WRITE H_FILE "#endif"
-$!
-$ WRITE H_FILE "#if defined(HEADER_BN_H)"
-$ WRITE H_FILE "#undef BN_LLONG" ! Never define with SIXTY_FOUR_BIT
-$ WRITE H_FILE "#undef SIXTY_FOUR_BIT_LONG"
-$ WRITE H_FILE "#undef SIXTY_FOUR_BIT"
-$ WRITE H_FILE "#define SIXTY_FOUR_BIT"
-$ WRITE H_FILE "#undef THIRTY_TWO_BIT"
-$ WRITE H_FILE "#undef SIXTEEN_BIT"
-$ WRITE H_FILE "#undef EIGHT_BIT"
-$ WRITE H_FILE "#endif"
-$
-$ WRITE H_FILE "#undef OPENSSL_EXPORT_VAR_AS_FUNCTION"
-$!
-$! Else...
-$!
-$ ELSE
-$!
-$! Write the VAX specific data
-$!
-$ WRITE H_FILE "#if defined(HEADER_RC4_H)"
-$ WRITE H_FILE "#undef RC4_INT"
-$ WRITE H_FILE "#define RC4_INT unsigned char"
-$ WRITE H_FILE "#undef RC4_CHUNK"
-$ WRITE H_FILE "#define RC4_CHUNK unsigned long"
-$ WRITE H_FILE "#endif"
-$!
-$ WRITE H_FILE "#if defined(HEADER_DES_LOCL_H)"
-$ WRITE H_FILE "#undef DES_LONG"
-$ WRITE H_FILE "#define DES_LONG unsigned long"
-$ WRITE H_FILE "#undef DES_PTR"
-$ WRITE H_FILE "#define DES_PTR"
-$ WRITE H_FILE "#undef DES_RISC1"
-$ WRITE H_FILE "#undef DES_RISC2"
-$ WRITE H_FILE "#undef DES_UNROLL"
-$ WRITE H_FILE "#endif"
-$!
-$ WRITE H_FILE "#if defined(HEADER_BN_H)"
-$ WRITE H_FILE "#undef BN_LLONG" ! VAX C/DEC C doesn't have long long
-$ WRITE H_FILE "#undef SIXTY_FOUR_BIT_LONG"
-$ WRITE H_FILE "#undef SIXTY_FOUR_BIT"
-$ WRITE H_FILE "#undef THIRTY_TWO_BIT"
-$ WRITE H_FILE "#define THIRTY_TWO_BIT"
-$ WRITE H_FILE "#undef SIXTEEN_BIT"
-$ WRITE H_FILE "#undef EIGHT_BIT"
-$ WRITE H_FILE "#endif"
-$!
-$! Oddly enough, the following symbol is tested in crypto/sha/sha512.c
-$! before sha.h gets included (and HEADER_SHA_H defined), so we will not
-$! protect this one...
-$ WRITE H_FILE "#undef OPENSSL_NO_SHA512"
-$ WRITE H_FILE "#define OPENSSL_NO_SHA512"
-$!
-$ WRITE H_FILE "#undef OPENSSL_EXPORT_VAR_AS_FUNCTION"
-$ WRITE H_FILE "#define OPENSSL_EXPORT_VAR_AS_FUNCTION"
-$!
-$! End
-$!
-$ ENDIF
-$!
-$! Close the [.CRYPTO._xxx]OPENSSLCONF.H file
-$!
-$ CLOSE H_FILE
-$!
-$! Purge The [.CRYPTO._xxx]OPENSSLCONF.H file
-$!
-$ PURGE SYS$DISK:[.CRYPTO._'ARCH']OPENSSLCONF.H
-$!
-$! That's All, Time To RETURN.
-$!
-$ RETURN
-$!
-$! Rebuild The "[.CRYPTO._xxx]BUILDINF.H" file.
-$!
-$ BUILDINF:
-$!
-$! Tell The User We Are Creating The [.CRYPTO._xxx]BUILDINF.H File.
-$!
-$ WRITE SYS$OUTPUT "Creating [.CRYPTO._''ARCH']BUILDINF.H Include File."
-$!
-$! Create The [.CRYPTO._xxx]BUILDINF.H File.
-$!
-$ BIH_NAME = "SYS$DISK:[.CRYPTO._''ARCH']BUILDINF.H"
-$ CREATE /FDL=SYS$INPUT: 'BIH_NAME'
-RECORD
- FORMAT stream_lf
-$!
-$ OPEN /APPEND H_FILE 'bih_name'
-$!
-$! Get The Current Date & Time.
-$!
-$ TIME = F$TIME()
-$!
-$! Write The [.CRYPTO._xxx]BUILDINF.H File.
-$!
-$! WRITE H_FILE "#define CFLAGS """" /* Not filled in for now */"
-$ WRITE H_FILE "#define PLATFORM ""VMS ''ARCH' ''VMS_VERSION'"""
-$ WRITE H_FILE "#define DATE ""''TIME'"" "
-$!
-$! Close The [.CRYPTO._xxx]BUILDINF.H File.
-$!
-$ CLOSE H_FILE
-$!
-$! Purge The [.CRYPTO._xxx]BUILDINF.H File.
-$!
-$ PURGE SYS$DISK:[.CRYPTO._'ARCH']BUILDINF.H
-$!
-$! Delete [.CRYPTO]BUILDINF.H File, as there might be some residue from Unix.
-$!
-$ IF F$SEARCH("[.CRYPTO]BUILDINF.H") .NES. "" THEN -
- DELETE SYS$DISK:[.CRYPTO]BUILDINF.H;*
-$!
-$! That's All, Time To RETURN.
-$!
-$ RETURN
-$!
-$! Copy a lot of files around.
-$!
-$ SOFTLINKS:
-$!
-$! Tell The User We Are Partly Rebuilding The [.APPS] Directory.
-$!
-$ WRITE SYS$OUTPUT "Rebuilding The '[.APPS]MD4.C' File."
-$!
-$ DELETE SYS$DISK:[.APPS]MD4.C;*
-$!
-$! Copy MD4.C from [.CRYPTO.MD4] into [.APPS]
-$!
-$ COPY SYS$DISK:[.CRYPTO.MD4]MD4.C SYS$DISK:[.APPS]
-$!
-$! Tell The User We Are Rebuilding The [.INCLUDE.OPENSSL] Directory.
-$!
-$ WRITE SYS$OUTPUT "Rebuilding The '[.INCLUDE.OPENSSL]' Directory."
-$!
-$! First, make sure the directory exists
-$!
-$ IF F$PARSE("SYS$DISK:[.INCLUDE.OPENSSL]") .EQS. "" THEN -
- CREATE/DIRECTORY SYS$DISK:[.INCLUDE.OPENSSL]
-$!
-$! Copy All The ".H" Files From The Main Directory.
-$!
-$ EXHEADER := e_os2.h
-$ COPY 'EXHEADER' SYS$DISK:[.INCLUDE.OPENSSL]
-$!
-$! Copy All The ".H" Files From The [.CRYPTO] Directory Tree.
-$!
-$ SDIRS := ,-
- _'ARCH',-
- OBJECTS,-
- MD2,MD4,MD5,SHA,MDC2,HMAC,RIPEMD,WHRLPOOL,-
- DES,AES,RC2,RC4,RC5,IDEA,BF,CAST,CAMELLIA,SEED,MODES,-
- BN,EC,RSA,DSA,ECDSA,DH,ECDH,DSO,ENGINE,-
- BUFFER,BIO,STACK,LHASH,RAND,ERR,-
- EVP,ASN1,PEM,X509,X509V3,CONF,TXT_DB,PKCS7,PKCS12,COMP,OCSP,UI,KRB5,-
- STORE,CMS,PQUEUE,TS,JPAKE
-$ EXHEADER_ := crypto.h,opensslv.h,ebcdic.h,symhacks.h,ossl_typ.h
-$ EXHEADER__'ARCH' := opensslconf.h
-$ EXHEADER_OBJECTS := objects.h,obj_mac.h
-$ EXHEADER_MD2 := md2.h
-$ EXHEADER_MD4 := md4.h
-$ EXHEADER_MD5 := md5.h
-$ EXHEADER_SHA := sha.h
-$ EXHEADER_MDC2 := mdc2.h
-$ EXHEADER_HMAC := hmac.h
-$ EXHEADER_RIPEMD := ripemd.h
-$ EXHEADER_WHRLPOOL := whrlpool.h
-$ EXHEADER_DES := des.h,des_old.h
-$ EXHEADER_AES := aes.h
-$ EXHEADER_RC2 := rc2.h
-$ EXHEADER_RC4 := rc4.h
-$ EXHEADER_RC5 := rc5.h
-$ EXHEADER_IDEA := idea.h
-$ EXHEADER_BF := blowfish.h
-$ EXHEADER_CAST := cast.h
-$ EXHEADER_CAMELLIA := camellia.h
-$ EXHEADER_SEED := seed.h
-$ EXHEADER_MODES := modes.h
-$ EXHEADER_BN := bn.h
-$ EXHEADER_EC := ec.h
-$ EXHEADER_RSA := rsa.h
-$ EXHEADER_DSA := dsa.h
-$ EXHEADER_ECDSA := ecdsa.h
-$ EXHEADER_DH := dh.h
-$ EXHEADER_ECDH := ecdh.h
-$ EXHEADER_DSO := dso.h
-$ EXHEADER_ENGINE := engine.h
-$ EXHEADER_BUFFER := buffer.h
-$ EXHEADER_BIO := bio.h
-$ EXHEADER_STACK := stack.h,safestack.h
-$ EXHEADER_LHASH := lhash.h
-$ EXHEADER_RAND := rand.h
-$ EXHEADER_ERR := err.h
-$ EXHEADER_EVP := evp.h
-$ EXHEADER_ASN1 := asn1.h,asn1_mac.h,asn1t.h
-$ EXHEADER_PEM := pem.h,pem2.h
-$ EXHEADER_X509 := x509.h,x509_vfy.h
-$ EXHEADER_X509V3 := x509v3.h
-$ EXHEADER_CONF := conf.h,conf_api.h
-$ EXHEADER_TXT_DB := txt_db.h
-$ EXHEADER_PKCS7 := pkcs7.h
-$ EXHEADER_PKCS12 := pkcs12.h
-$ EXHEADER_COMP := comp.h
-$ EXHEADER_OCSP := ocsp.h
-$ EXHEADER_UI := ui.h,ui_compat.h
-$ EXHEADER_KRB5 := krb5_asn.h
-$!EXHEADER_STORE := store.h,str_compat.h
-$ EXHEADER_STORE := store.h
-$ EXHEADER_CMS := cms.h
-$ EXHEADER_PQUEUE := pqueue.h
-$ EXHEADER_TS := ts.h
-$ EXHEADER_JPAKE := jpake.h
-$
-$ I = 0
-$ LOOP_SDIRS:
-$ D = F$EDIT(F$ELEMENT(I, ",", SDIRS),"TRIM")
-$ I = I + 1
-$ IF D .EQS. "," THEN GOTO LOOP_SDIRS_END
-$ tmp = EXHEADER_'D'
-$ IF D .EQS. ""
-$ THEN
-$ COPY [.CRYPTO]'tmp' SYS$DISK:[.INCLUDE.OPENSSL] !/LOG
-$ ELSE
-$ COPY [.CRYPTO.'D']'tmp' SYS$DISK:[.INCLUDE.OPENSSL] !/LOG
-$ ENDIF
-$ GOTO LOOP_SDIRS
-$ LOOP_SDIRS_END:
-$!
-$! Copy All The ".H" Files From The [.SSL] Directory.
-$!
-$ EXHEADER := ssl.h,ssl2.h,ssl3.h,ssl23.h,tls1.h,dtls1.h,kssl.h
-$ COPY SYS$DISK:[.SSL]'EXHEADER' SYS$DISK:[.INCLUDE.OPENSSL]
-$!
-$! Purge all doubles
-$!
-$ PURGE SYS$DISK:[.INCLUDE.OPENSSL]*.H
-$!
-$! That's All, Time To RETURN.
-$!
-$ RETURN
-$!
-$! Build The "[.xxx.EXE.CRYPTO]LIBCRYPTO.OLB" Library.
-$!
-$ CRYPTO:
-$!
-$! Tell The User What We Are Doing.
-$!
-$ WRITE SYS$OUTPUT ""
-$ WRITE SYS$OUTPUT "Building The [.",ARCH,".EXE.CRYPTO]LIBCRYPTO.OLB Library."
-$!
-$! Go To The [.CRYPTO] Directory.
-$!
-$ SET DEFAULT SYS$DISK:[.CRYPTO]
-$!
-$! Build The [.xxx.EXE.CRYPTO]LIBCRYPTO.OLB Library.
-$!
-$ @CRYPTO-LIB LIBRARY 'DEBUGGER' "''COMPILER'" "''TCPIP_TYPE'" "''ISSEVEN'" "''BUILDPART'"
-$!
-$! Build The [.xxx.EXE.CRYPTO]*.EXE Test Applications.
-$!
-$ @CRYPTO-LIB APPS 'DEBUGGER' "''COMPILER'" "''TCPIP_TYPE'" 'ISSEVEN' "''BUILDPART'"
-$!
-$! Go Back To The Main Directory.
-$!
-$ SET DEFAULT [-]
-$!
-$! Time To RETURN.
-$!
-$ RETURN
-$!
-$! Build The "[.xxx.EXE.SSL]LIBSSL.OLB" Library.
-$!
-$ SSL:
-$!
-$! Tell The User What We Are Doing.
-$!
-$ WRITE SYS$OUTPUT ""
-$ WRITE SYS$OUTPUT "Building The [.",ARCH,".EXE.SSL]LIBSSL.OLB Library."
-$!
-$! Go To The [.SSL] Directory.
-$!
-$ SET DEFAULT SYS$DISK:[.SSL]
-$!
-$! Build The [.xxx.EXE.SSL]LIBSSL.OLB Library.
-$!
-$ @SSL-LIB LIBRARY 'DEBUGGER' "''COMPILER'" "''TCPIP_TYPE'" 'ISSEVEN'
-$!
-$! Go Back To The Main Directory.
-$!
-$ SET DEFAULT [-]
-$!
-$! Time To Return.
-$!
-$ RETURN
-$!
-$! Build The "[.xxx.EXE.SSL]SSL_TASK.EXE" Program.
-$!
-$ SSL_TASK:
-$!
-$! Tell The User What We Are Doing.
-$!
-$ WRITE SYS$OUTPUT ""
-$ WRITE SYS$OUTPUT "Building DECNet Based SSL Engine, [.",ARCH,".EXE.SSL]SSL_TASK.EXE"
-$!
-$! Go To The [.SSL] Directory.
-$!
-$ SET DEFAULT SYS$DISK:[.SSL]
-$!
-$! Build The [.xxx.EXE.SSL]SSL_TASK.EXE
-$!
-$ @SSL-LIB SSL_TASK 'DEBUGGER' "''COMPILER'" "''TCPIP_TYPE'" 'ISSEVEN'
-$!
-$! Go Back To The Main Directory.
-$!
-$ SET DEFAULT [-]
-$!
-$! That's All, Time To RETURN.
-$!
-$ RETURN
-$!
-$! Build The OpenSSL Test Programs.
-$!
-$ TEST:
-$!
-$! Tell The User What We Are Doing.
-$!
-$ WRITE SYS$OUTPUT ""
-$ WRITE SYS$OUTPUT "Building The OpenSSL [.",ARCH,".EXE.TEST] Test Utilities."
-$!
-$! Go To The [.TEST] Directory.
-$!
-$ SET DEFAULT SYS$DISK:[.TEST]
-$!
-$! Build The Test Programs.
-$!
-$ @MAKETESTS 'DEBUGGER' "''COMPILER'" "''TCPIP_TYPE'" 'ISSEVEN'
-$!
-$! Go Back To The Main Directory.
-$!
-$ SET DEFAULT [-]
-$!
-$! That's All, Time To RETURN.
-$!
-$ RETURN
-$!
-$! Build The OpenSSL Application Programs.
-$!
-$ APPS:
-$!
-$! Tell The User What We Are Doing.
-$!
-$ WRITE SYS$OUTPUT ""
-$ WRITE SYS$OUTPUT "Building OpenSSL [.",ARCH,".EXE.APPS] Applications."
-$!
-$! Go To The [.APPS] Directory.
-$!
-$ SET DEFAULT SYS$DISK:[.APPS]
-$!
-$! Build The Application Programs.
-$!
-$ @MAKEAPPS 'DEBUGGER' "''COMPILER'" "''TCPIP_TYPE'" 'ISSEVEN'
-$!
-$! Go Back To The Main Directory.
-$!
-$ SET DEFAULT [-]
-$!
-$! That's All, Time To RETURN.
-$!
-$ RETURN
-$!
-$! Build The OpenSSL Application Programs.
-$!
-$ ENGINES:
-$!
-$! Tell The User What We Are Doing.
-$!
-$ WRITE SYS$OUTPUT ""
-$ WRITE SYS$OUTPUT "Building OpenSSL [.",ARCH,".EXE.ENGINES] Engines."
-$!
-$! Go To The [.ENGINES] Directory.
-$!
-$ SET DEFAULT SYS$DISK:[.ENGINES]
-$!
-$! Build The Application Programs.
-$!
-$ @MAKEENGINES ENGINES 'DEBUGGER' "''COMPILER'" "''TCPIP_TYPE'" 'ISSEVEN' "''BUILDPART'"
-$!
-$! Go Back To The Main Directory.
-$!
-$ SET DEFAULT [-]
-$!
-$! That's All, Time To RETURN.
-$!
-$ RETURN
-$!
-$! Check The User's Options.
-$!
-$ CHECK_OPTIONS:
-$!
-$! Check if there's a "part", and separate it out
-$!
-$ BUILDPART = F$ELEMENT(1,"/",P1)
-$ IF BUILDPART .EQS. "/"
-$ THEN
-$ BUILDPART = ""
-$ ELSE
-$ P1 = F$EXTRACT(0,F$LENGTH(P1) - F$LENGTH(BUILDPART) - 1, P1)
-$ ENDIF
-$!
-$! Check To See If P1 Is Blank.
-$!
-$ IF (P1.EQS."ALL")
-$ THEN
-$!
-$! P1 Is ALL, So Build Everything.
-$!
-$ BUILDCOMMAND = "ALL"
-$!
-$! Else...
-$!
-$ ELSE
-$!
-$! Else, Check To See If P1 Has A Valid Argument.
-$!
-$ IF (P1.EQS."CONFIG").OR.(P1.EQS."BUILDINF").OR.(P1.EQS."SOFTLINKS") -
- .OR.(P1.EQS."BUILDALL") -
- .OR.(P1.EQS."CRYPTO").OR.(P1.EQS."SSL") -
- .OR.(P1.EQS."SSL_TASK").OR.(P1.EQS."TEST").OR.(P1.EQS."APPS") -
- .OR.(P1.EQS."ENGINES")
-$ THEN
-$!
-$! A Valid Argument.
-$!
-$ BUILDCOMMAND = P1
-$!
-$! Else...
-$!
-$ ELSE
-$!
-$! Tell The User We Don't Know What They Want.
-$!
-$ WRITE SYS$OUTPUT ""
-$ WRITE SYS$OUTPUT "USAGE: @MAKEVMS.COM [Target] [not-used option] [Debug option] <Compiler>"
-$ WRITE SYS$OUTPUT ""
-$ WRITE SYS$OUTPUT "Example: @MAKEVMS.COM ALL NORSAREF NODEBUG "
-$ WRITE SYS$OUTPUT ""
-$ WRITE SYS$OUTPUT "The Target ",P1," Is Invalid. The Valid Target Options Are:"
-$ WRITE SYS$OUTPUT ""
-$ WRITE SYS$OUTPUT " ALL : Just Build Everything."
-$ WRITE SYS$OUTPUT " CONFIG : Just build the [.CRYPTO._xxx]OPENSSLCONF.H file."
-$ WRITE SYS$OUTPUT " BUILDINF : Just build the [.CRYPTO._xxx]BUILDINF.H file."
-$ WRITE SYS$OUTPUT " SOFTLINKS: Just Fix The Unix soft links."
-$ WRITE SYS$OUTPUT " BUILDALL : Same as ALL, except CONFIG, BUILDINF and SOFTILNKS aren't done."
-$ WRITE SYS$OUTPUT " CRYPTO : To Build Just The [.xxx.EXE.CRYPTO]LIBCRYPTO.OLB Library."
-$ WRITE SYS$OUTPUT " CRYPTO/x : To Build Just The x Part Of The"
-$ WRITE SYS$OUTPUT " [.xxx.EXE.CRYPTO]LIBCRYPTO.OLB Library."
-$ WRITE SYS$OUTPUT " SSL : To Build Just The [.xxx.EXE.SSL]LIBSSL.OLB Library."
-$ WRITE SYS$OUTPUT " SSL_TASK : To Build Just The [.xxx.EXE.SSL]SSL_TASK.EXE Program."
-$ WRITE SYS$OUTPUT " TEST : To Build Just The OpenSSL Test Programs."
-$ WRITE SYS$OUTPUT " APPS : To Build Just The OpenSSL Application Programs."
-$ WRITE SYS$OUTPUT " ENGINES : To Build Just The ENGINES"
-$ WRITE SYS$OUTPUT ""
-$ WRITE SYS$OUTPUT " Where 'xxx' Stands For:"
-$ WRITE SYS$OUTPUT ""
-$ WRITE SYS$OUTPUT " ALPHA : Alpha Architecture."
-$ WRITE SYS$OUTPUT " IA64 : IA64 Architecture."
-$ WRITE SYS$OUTPUT " VAX : VAX Architecture."
-$ WRITE SYS$OUTPUT ""
-$!
-$! Time To EXIT.
-$!
-$ GOTO TIDY
-$!
-$! End The Valid Argument Check.
-$!
-$ ENDIF
-$!
-$! End The P1 Check.
-$!
-$ ENDIF
-$!
-$! Check To See If P3 Is Blank.
-$!
-$ IF (P3.EQS."NODEBUG")
-$ THEN
-$!
-$! P3 Is NODEBUG, So Compile Without Debugger Information.
-$!
-$ DEBUGGER = "NODEBUG"
-$!
-$! Else...
-$!
-$ ELSE
-$!
-$! Check To See If We Are To Compile With Debugger Information.
-$!
-$ IF (P3.EQS."DEBUG")
-$ THEN
-$!
-$! Compile With Debugger Information.
-$!
-$ DEBUGGER = "DEBUG"
-$!
-$! Else...
-$!
-$ ELSE
-$!
-$! Tell The User Entered An Invalid Option..
-$!
-$ WRITE SYS$OUTPUT ""
-$ WRITE SYS$OUTPUT "The Option ",P3," Is Invalid. The Valid Options Are:"
-$ WRITE SYS$OUTPUT ""
-$ WRITE SYS$OUTPUT " DEBUG : Compile With The Debugger Information."
-$ WRITE SYS$OUTPUT " NODEBUG : Compile Without The Debugger Information."
-$ WRITE SYS$OUTPUT ""
-$!
-$! Time To EXIT.
-$!
-$ GOTO TIDY
-$!
-$! End The Valid Argument Check.
-$!
-$ ENDIF
-$!
-$! End The P3 Check.
-$!
-$ ENDIF
-$!
-$! Check To See If P4 Is Blank.
-$!
-$ IF (P4.EQS."")
-$ THEN
-$!
-$! O.K., The User Didn't Specify A Compiler, Let's Try To
-$! Find Out Which One To Use.
-$!
-$! Check To See If We Have GNU C.
-$!
-$ IF (F$TRNLNM("GNU_CC").NES."")
-$ THEN
-$!
-$! Looks Like GNUC, Set To Use GNUC.
-$!
-$ COMPILER = "GNUC"
-$!
-$! Tell The User We Are Using GNUC.
-$!
-$ WRITE SYS$OUTPUT "Using GNU 'C' Compiler."
-$!
-$! End The GNU C Compiler Check.
-$!
-$ ENDIF
-$!
-$! Check To See If We Have VAXC Or DECC.
-$!
-$ IF (F$GETSYI("CPU").GE.128).OR.(F$TRNLNM("DECC$CC_DEFAULT").EQS."/DECC")
-$ THEN
-$!
-$! Looks Like DECC, Set To Use DECC.
-$!
-$ COMPILER = "DECC"
-$!
-$! Tell The User We Are Using DECC.
-$!
-$ WRITE SYS$OUTPUT "Using DECC 'C' Compiler."
-$!
-$! Else...
-$!
-$ ELSE
-$!
-$! Looks Like VAXC, Set To Use VAXC.
-$!
-$ COMPILER = "VAXC"
-$!
-$! Tell The User We Are Using VAX C.
-$!
-$ WRITE SYS$OUTPUT "Using VAXC 'C' Compiler."
-$!
-$! End The DECC & VAXC Compiler Check.
-$!
-$ ENDIF
-$!
-$! Else...
-$!
-$ ELSE
-$!
-$! Check To See If The User Entered A Valid Paramter.
-$!
-$ IF (P4.EQS."VAXC").OR.(P4.EQS."DECC").OR.(P4.EQS."GNUC")!.OR.(P4.EQS."LINK")
-$ THEN
-$!
-$! Check To See If The User Wanted To Just LINK.
-$!
-$ IF (P4.EQS."LINK")
-$ THEN
-$!
-$! Looks Like LINK-only
-$!
-$ COMPILER = "LINK"
-$!
-$! Tell The User We Are Only Linking.
-$!
-$ WRITE SYS$OUTPUT "LINK Only. This actually NOT YET SUPPORTED!"
-$!
-$! End LINK Check.
-$!
-$ ENDIF
-$!
-$! Check To See If The User Wanted DECC.
-$!
-$ IF (P4.EQS."DECC")
-$ THEN
-$!
-$! Looks Like DECC, Set To Use DECC.
-$!
-$ COMPILER = "DECC"
-$!
-$! Tell The User We Are Using DECC.
-$!
-$ WRITE SYS$OUTPUT "Using DECC 'C' Compiler."
-$!
-$! End DECC Check.
-$!
-$ ENDIF
-$!
-$! Check To See If We Are To Use VAXC.
-$!
-$ IF (P4.EQS."VAXC")
-$ THEN
-$!
-$! Looks Like VAXC, Set To Use VAXC.
-$!
-$ COMPILER = "VAXC"
-$!
-$! Tell The User We Are Using VAX C.
-$!
-$ WRITE SYS$OUTPUT "Using VAXC 'C' Compiler."
-$!
-$! End VAXC Check
-$!
-$ ENDIF
-$!
-$! Check To See If We Are To Use GNU C.
-$!
-$ IF (P4.EQS."GNUC")
-$ THEN
-$!
-$! Looks Like GNUC, Set To Use GNUC.
-$!
-$ COMPILER = "GNUC"
-$!
-$! Tell The User We Are Using GNUC.
-$!
-$ WRITE SYS$OUTPUT "Using GNU 'C' Compiler."
-$!
-$! End The GNU C Check.
-$!
-$ ENDIF
-$!
-$! Else The User Entered An Invalid Argument.
-$!
-$ ELSE
-$!
-$! Tell The User We Don't Know What They Want.
-$!
-$ WRITE SYS$OUTPUT ""
-$ WRITE SYS$OUTPUT "The Option ",P4," Is Invalid. The Valid Options Are:"
-$ WRITE SYS$OUTPUT ""
-$ WRITE SYS$OUTPUT " VAXC : To Compile With VAX C."
-$ WRITE SYS$OUTPUT " DECC : To Compile With DEC C."
-$ WRITE SYS$OUTPUT " GNUC : To Compile With GNU C."
-$ WRITE SYS$OUTPUT ""
-$!
-$! Time To EXIT.
-$!
-$ GOTO TIDY
-$!
-$! End The Valid Argument Check.
-$!
-$ ENDIF
-$!
-$! End The P4 Check.
-$!
-$ ENDIF
-$!
-$! Time to check the contents of P5, and to make sure we get the correct library.
-$!
-$ IF P5.EQS."SOCKETSHR" .OR. P5.EQS."MULTINET" .OR. P5.EQS."UCX" -
- .OR. P5.EQS."TCPIP" .OR. P5.EQS."NONE"
-$ THEN
-$!
-$! Check to see if SOCKETSHR was chosen
-$!
-$ IF P5.EQS."SOCKETSHR"
-$ THEN
-$!
-$! Set the library to use SOCKETSHR
-$!
-$ TCPIP_LIB = "SYS$DISK:[-.VMS]SOCKETSHR_SHR.OPT/OPT"
-$!
-$! Tell the user
-$!
-$ WRITE SYS$OUTPUT "Using SOCKETSHR for TCP/IP"
-$!
-$! Done with SOCKETSHR
-$!
-$ ENDIF
-$!
-$! Check to see if MULTINET was chosen
-$!
-$ IF P5.EQS."MULTINET"
-$ THEN
-$!
-$! Set the library to use UCX emulation.
-$!
-$ P5 = "UCX"
-$!
-$! Tell the user
-$!
-$ WRITE SYS$OUTPUT "Using MultiNet via UCX emulation for TCP/IP"
-$!
-$! Done with MULTINET
-$!
-$ ENDIF
-$!
-$! Check to see if UCX was chosen
-$!
-$ IF P5.EQS."UCX"
-$ THEN
-$!
-$! Set the library to use UCX.
-$!
-$ TCPIP_LIB = "SYS$DISK:[-.VMS]UCX_SHR_DECC.OPT/OPT"
-$!
-$! Tell the user
-$!
-$ WRITE SYS$OUTPUT "Using UCX or an emulation thereof for TCP/IP"
-$!
-$! Done with UCX
-$!
-$ ENDIF
-$!
-$! Check to see if TCPIP was chosen
-$!
-$ IF P5.EQS."TCPIP"
-$ THEN
-$!
-$! Set the library to use TCPIP (post UCX).
-$!
-$ TCPIP_LIB = "SYS$DISK:[-.VMS]TCPIP_SHR_DECC.OPT/OPT"
-$!
-$! Tell the user
-$!
-$ WRITE SYS$OUTPUT "Using TCPIP (post UCX) for TCP/IP"
-$!
-$! Done with TCPIP
-$!
-$ ENDIF
-$!
-$! Check to see if NONE was chosen
-$!
-$ IF P5.EQS."NONE"
-$ THEN
-$!
-$! Do not use a TCPIP library.
-$!
-$ TCPIP_LIB = ""
-$!
-$! Tell the user
-$!
-$ WRITE SYS$OUTPUT "A specific TCPIP library will not be used."
-$!
-$! Done with NONE.
-$!
-$ ENDIF
-$!
-$! Set the TCPIP_TYPE symbol
-$!
-$ TCPIP_TYPE = P5
-$!
-$! Print info
-$!
-$ WRITE SYS$OUTPUT "TCP/IP library spec: ", TCPIP_LIB
-$!
-$! Else The User Entered An Invalid Argument.
-$!
-$ ELSE
-$ IF P5 .NES. ""
-$ THEN
-$!
-$! Tell The User We Don't Know What They Want.
-$!
-$ WRITE SYS$OUTPUT ""
-$ WRITE SYS$OUTPUT "The Option ",P5," Is Invalid. The Valid Options Are:"
-$ WRITE SYS$OUTPUT ""
-$ WRITE SYS$OUTPUT " SOCKETSHR : To link with SOCKETSHR TCP/IP library."
-$ WRITE SYS$OUTPUT " UCX : To link with UCX TCP/IP library."
-$ WRITE SYS$OUTPUT " TCPIP : To link with TCPIP TCP/IP (post UCX) library."
-$ WRITE SYS$OUTPUT " NONE : To not link with a specific TCP/IP library."
-$ WRITE SYS$OUTPUT ""
-$!
-$! Time To EXIT.
-$!
-$ GOTO TIDY
-$ ELSE
-$!
-$! If TCPIP is not defined, then hardcode it to make
-$! it clear that no TCPIP is desired.
-$!
-$ IF P5 .EQS. ""
-$ THEN
-$ TCPIP_LIB = ""
-$ TCPIP_TYPE = "NONE"
-$ ELSE
-$!
-$! Set the TCPIP_TYPE symbol
-$!
-$ TCPIP_TYPE = P5
-$ ENDIF
-$ ENDIF
-$!
-$! Done with TCP/IP libraries
-$!
-$ ENDIF
-$!
-$! Special Threads For OpenVMS v7.1 Or Later
-$!
-$! Written By: Richard Levitte
-$! richard@levitte.org
-$!
-$!
-$! Check To See If We Have A Option For P6.
-$!
-$ IF (P6.EQS."")
-$ THEN
-$!
-$! Get The Version Of VMS We Are Using.
-$!
-$ ISSEVEN :=
-$ TMP = F$ELEMENT(0,"-",F$EXTRACT(1,4,VMS_VERSION))
-$ TMP = F$INTEGER(F$ELEMENT(0,".",TMP)+F$ELEMENT(1,".",TMP))
-$!
-$! Check To See If The VMS Version Is v7.1 Or Later.
-$!
-$ IF (TMP.GE.71)
-$ THEN
-$!
-$! We Have OpenVMS v7.1 Or Later, So Use The Special Threads.
-$!
-$ ISSEVEN := ,PTHREAD_USE_D4
-$!
-$! End The VMS Version Check.
-$!
-$ ENDIF
-$!
-$! End The P6 Check.
-$!
-$ ENDIF
-$!
-$! Time To RETURN...
-$!
-$ RETURN
-$!
-$ TIDY:
-$ SET DEFAULT 'DEF_ORIG'
-$ EXIT
-$!
+$!
+$! MAKEVMS.COM
+$! Original Author: UNKNOWN
+$! Rewritten By: Robert Byer
+$! Vice-President
+$! A-Com Computing, Inc.
+$! byer@mail.all-net.net
+$!
+$! Changes by Richard Levitte <richard@levitte.org>
+$! Zoltan Arpadffy <zoli@polarhome.com>
+$!
+$! This procedure creates the SSL libraries of "[.xxx.EXE.CRYPTO]LIBCRYPTO.OLB"
+$! "[.xxx.EXE.SSL]LIBSSL.OLB"
+$! The "xxx" denotes the machine architecture of ALPHA, IA64 or VAX.
+$!
+$! This procedures accepts two command line options listed below.
+$!
+$! Specify one of the following build options for P1.
+$!
+$! ALL Just build "everything".
+$! CONFIG Just build the "[.CRYPTO._xxx]OPENSSLCONF.H" file.
+$! BUILDINF Just build the "[.CRYPTO._xxx]BUILDINF.H" file.
+$! SOFTLINKS Just fix the Unix soft links.
+$! BUILDALL Same as ALL, except CONFIG, BUILDINF and SOFTILNKS aren't done.
+$! CRYPTO Just build the "[.xxx.EXE.CRYPTO]LIBCRYPTO.OLB" library.
+$! CRYPTO/x Just build the x part of the
+$! "[.xxx.EXE.CRYPTO]LIBCRYPTO.OLB" library.
+$! SSL Just build the "[.xxx.EXE.SSL]LIBSSL.OLB" library.
+$! SSL_TASK Just build the "[.xxx.EXE.SSL]SSL_TASK.EXE" program.
+$! TEST Just build the "[.xxx.EXE.TEST]" test programs for OpenSSL.
+$! APPS Just build the "[.xxx.EXE.APPS]" application programs for OpenSSL.
+$! ENGINES Just build the "[.xxx.EXE.ENGINES]" application programs for OpenSSL.
+$!
+$!
+$! For 64 bit architectures (Alpha and IA64), specify the pointer size as P2.
+$! For 32 bit architectures (VAX), P2 is ignored.
+$! Currently supported values are:
+$!
+$! 32 To ge a library compiled with /POINTER_SIZE=32
+$! 64 To ge a library compiled with /POINTER_SIZE=64
+$!
+$!
+$! Specify DEBUG or NODEBUG as P3 to compile with or without debugging
+$! information.
+$!
+$! Specify which compiler as P4 to try to compile under.
+$!
+$! VAXC For VAX C.
+$! DECC For DEC C.
+$! GNUC For GNU C.
+$! LINK To only link the programs from existing object files.
+$! (not yet implemented)
+$!
+$! If you don't specify a compiler, it will try to determine which
+$! "C" compiler to use.
+$!
+$! P5, if defined, sets a TCP/IP library to use, through one of the following
+$! keywords:
+$!
+$! UCX for UCX or UCX emulation
+$! TCPIP for TCP/IP Services or TCP/IP Services emulation
+$! (this is prefered over UCX)
+$! SOCKETSHR for SOCKETSHR+NETLIB
+$! NONE to avoid specifying which TCP/IP implementation to
+$! use at build time (this works with DEC C). This is
+$! the default.
+$!
+$! P6, if defined, sets a compiler thread NOT needed on OpenVMS 7.1 (and up)
+$!
+$!
+$ DEF_ORIG = F$ENVIRONMENT( "DEFAULT")
+$ ON ERROR THEN GOTO TIDY
+$ ON CONTROL_C THEN GOTO TIDY
+$!
+$! Check if we're in a batch job, and make sure we get to
+$! the directory this script is in
+$!
+$ IF F$MODE() .EQS. "BATCH"
+$ THEN
+$ COMNAME=F$ENVIRONMENT("PROCEDURE")
+$ COMPATH=F$PARSE("A.;",COMNAME) - "A.;"
+$ SET DEF 'COMPATH'
+$ ENDIF
+$!
+$! Check What Architecture We Are Using.
+$!
+$ IF (F$GETSYI("CPU").LT.128)
+$ THEN
+$!
+$! The Architecture Is VAX.
+$!
+$ ARCH = "VAX"
+$!
+$! Else...
+$!
+$ ELSE
+$!
+$! The Architecture Is Alpha, IA64 or whatever comes in the future.
+$!
+$ ARCH = F$EDIT( F$GETSYI( "ARCH_NAME"), "UPCASE")
+$ IF (ARCH .EQS. "") THEN ARCH = "UNK"
+$!
+$! End The Architecture Check.
+$!
+$ ENDIF
+$!
+$! Get VMS version.
+$!
+$ VMS_VERSION = f$edit( f$getsyi( "VERSION"), "TRIM")
+$!
+$! Check To Make Sure We Have Valid Command Line Parameters.
+$!
+$ GOSUB CHECK_OPTIONS
+$!
+$! Check To See What We Are To Do.
+$!
+$ IF (BUILDCOMMAND.EQS."ALL")
+$ THEN
+$!
+$! Start with building the OpenSSL configuration file.
+$!
+$ GOSUB CONFIG
+$!
+$! Create The "BUILDINF.H" Include File.
+$!
+$ GOSUB BUILDINF
+$!
+$! Fix The Unix Softlinks.
+$!
+$ GOSUB SOFTLINKS
+$!
+$ ENDIF
+$!
+$ IF (BUILDCOMMAND.EQS."ALL".OR.BUILDCOMMAND.EQS."BUILDALL")
+$ THEN
+$!
+$! Build The [.xxx.EXE.CRYPTO]LIBCRYPTO.OLB Library.
+$!
+$ GOSUB CRYPTO
+$!
+$! Build The [.xxx.EXE.SSL]LIBSSL.OLB Library.
+$!
+$ GOSUB SSL
+$!
+$! Build The [.xxx.EXE.SSL]SSL_TASK.EXE DECNet SSL Engine.
+$!
+$ GOSUB SSL_TASK
+$!
+$! Build The [.xxx.EXE.TEST] OpenSSL Test Utilities.
+$!
+$ GOSUB TEST
+$!
+$! Build The [.xxx.EXE.APPS] OpenSSL Application Utilities.
+$!
+$ GOSUB APPS
+$!
+$! Build The [.xxx.EXE.ENGINES] OpenSSL Shareable Engines.
+$!
+$ GOSUB ENGINES
+$!
+$! Else...
+$!
+$ ELSE
+$!
+$! Build Just What The User Wants Us To Build.
+$!
+$ GOSUB 'BUILDCOMMAND'
+$!
+$ ENDIF
+$!
+$! Time To EXIT.
+$!
+$ GOTO TIDY
+$!
+$! Rebuild The [.CRYPTO._xxx]OPENSSLCONF.H" file.
+$!
+$ CONFIG:
+$!
+$! Tell The User We Are Creating The [.CRYPTO._xxx]OPENSSLCONF.H File.
+$!
+$ WRITE SYS$OUTPUT "Creating [.CRYPTO._''ARCH']OPENSSLCONF.H Include File."
+$!
+$! First, make sure the directory exists.
+$!
+$ IF F$PARSE("SYS$DISK:[.CRYPTO._''ARCH']") .EQS. "" THEN -
+ CREATE/DIRECTORY SYS$DISK:[.CRYPTO._'ARCH']
+$!
+$! Different tar/UnZip versions/option may have named the file differently
+$ IF F$SEARCH("[.crypto]opensslconf.h_in") .NES. ""
+$ THEN
+$ OPENSSLCONF_H_IN = "[.crypto]opensslconf.h_in"
+$ ELSE
+$ IF F$SEARCH( "[.crypto]opensslconf_h.in") .NES. ""
+$ THEN
+$ OPENSSLCONF_H_IN = "[.crypto]opensslconf_h.in"
+$ ELSE
+$ ! For ODS-5
+$ IF F$SEARCH( "[.crypto]opensslconf.h.in") .NES. ""
+$ THEN
+$ OPENSSLCONF_H_IN = "[.crypto]opensslconf.h.in"
+$ ELSE
+$ WRITE SYS$ERROR "Couldn't find a [.crypto]opensslconf.h.in. Exiting!"
+$ $STATUS = %X00018294 ! "%RMS-F-FNF, file not found".
+$ GOTO TIDY
+$ ENDIF
+$ ENDIF
+$ ENDIF
+$!
+$! Create The [.CRYPTO._xxx]OPENSSLCONF.H File.
+$! Make sure it has the right format.
+$!
+$ OSCH_NAME = "SYS$DISK:[.CRYPTO._''ARCH']OPENSSLCONF.H"
+$ CREATE /FDL=SYS$INPUT: 'OSCH_NAME'
+RECORD
+ FORMAT stream_lf
+$ OPEN /APPEND H_FILE 'OSCH_NAME'
+$!
+$! Write The [.CRYPTO._xxx]OPENSSLCONF.H File.
+$!
+$ WRITE H_FILE "/* This file was automatically built using makevms.com */"
+$ WRITE H_FILE "/* and ''OPENSSLCONF_H_IN' */"
+$!
+$! Write a few macros that indicate how this system was built.
+$!
+$ WRITE H_FILE ""
+$ WRITE H_FILE "#ifndef OPENSSL_SYS_VMS"
+$ WRITE H_FILE "# define OPENSSL_SYS_VMS"
+$ WRITE H_FILE "#endif"
+$
+$! One of the best way to figure out what the list should be is to do
+$! the followin on a Unix system:
+$! grep OPENSSL_NO_ crypto/*/*.h ssl/*.h engines/*.h engines/*/*.h|grep ':# *if'|sed -e 's/^.*def //'|sort|uniq
+$! For that reason, the list will also always end up in alphabetical order
+$ CONFIG_LOGICALS := AES,-
+ ASM,INLINE_ASM,-
+ BF,-
+ BIO,-
+ BUFFER,-
+ BUF_FREELISTS,-
+ CAMELLIA,-
+ CAST,-
+ CMS,-
+ COMP,-
+ DEPRECATED,-
+ DES,-
+ DGRAM,-
+ DH,-
+ DSA,-
+ EC,-
+ ECDH,-
+ ECDSA,-
+ ENGINE,-
+ ERR,-
+ EVP,-
+ FP_API,-
+ GMP,-
+ GOST,-
+ HASH_COMP,-
+ HMAC,-
+ IDEA,-
+ JPAKE,-
+ KRB5,-
+ LHASH,-
+ MD2,-
+ MD4,-
+ MD5,-
+ MDC2,-
+ OCSP,-
+ PSK,-
+ RC2,-
+ RC4,-
+ RC5,-
+ RFC3779,-
+ RIPEMD,-
+ RSA,-
+ SEED,-
+ SHA,-
+ SHA0,-
+ SHA1,-
+ SHA256,-
+ SHA512,-
+ SOCK,-
+ SSL2,-
+ STACK,-
+ STATIC_ENGINE,-
+ STDIO,-
+ STORE,-
+ TLSEXT,-
+ WHIRLPOOL,-
+ X509
+$! Add a few that we know about
+$ CONFIG_LOGICALS := 'CONFIG_LOGICALS',-
+ THREADS
+$! The following rules, which dictate how some algorithm choices affect
+$! others, are picked from Configure.
+$! Quick syntax:
+$! list = item[ ; list]
+$! item = algos / dependents
+$! algos = algo [, algos]
+$! dependents = dependent [, dependents]
+$! When a list of algos is specified in one item, it means that they must
+$! all be disabled for the rule to apply.
+$! When a list of dependents is specified in one item, it means that they
+$! will all be disabled if the rule applies.
+$! Rules are checked sequentially. If a rule disables an algorithm, it will
+$! affect all following rules that depend on that algorithm being disabled.
+$! To force something to be enabled or disabled, have no algorithms in the
+$! algos part.
+$ CONFIG_DISABLE_RULES := RIJNDAEL/AES;-
+ DES/MDC2;-
+ EC/ECDSA,ECDH;-
+ MD5/SSL2,SSL3,TLS1;-
+ SHA/SSL3,TLS1;-
+ RSA/SSL2;-
+ RSA,DSA/SSL2;-
+ DH/SSL3,TLS1;-
+ TLS1/TLSEXT;-
+ EC/GOST;-
+ DSA/GOST;-
+ DH/GOST;-
+ /STATIC_ENGINE;-
+ /KRB5
+$ CONFIG_ENABLE_RULES := ZLIB_DYNAMIC/ZLIB;-
+ /THREADS
+$
+$! Architecture specific rule addtions
+$ IF ARCH .EQS. "VAX"
+$ THEN
+$ ! Disable algorithms that require 64 bit integers in C
+$ CONFIG_DISABLE_RULES = CONFIG_DISABLE_RULES + -
+ ";/GOST" + -
+ ";/WHIRLPOOL"
+$ ENDIF
+$
+$ CONFIG_LOG_I = 0
+$ CONFIG_LOG_LOOP1:
+$ CONFIG_LOG_E = F$EDIT(F$ELEMENT(CONFIG_LOG_I,",",CONFIG_LOGICALS),"TRIM")
+$ CONFIG_LOG_I = CONFIG_LOG_I + 1
+$ IF CONFIG_LOG_E .EQS. "" THEN GOTO CONFIG_LOG_LOOP1
+$ IF CONFIG_LOG_E .EQS. "," THEN GOTO CONFIG_LOG_LOOP1_END
+$ IF F$TRNLNM("OPENSSL_NO_"+CONFIG_LOG_E)
+$ THEN
+$ CONFIG_DISABLED_'CONFIG_LOG_E' := YES
+$ CONFIG_ENABLED_'CONFIG_LOG_E' := NO
+$ CONFIG_CHANGED_'CONFIG_LOG_E' := YES
+$ ELSE
+$ CONFIG_DISABLED_'CONFIG_LOG_E' := NO
+$ CONFIG_ENABLED_'CONFIG_LOG_E' := YES
+$ ! Because all algorithms are assumed enabled by default
+$ CONFIG_CHANGED_'CONFIG_LOG_E' := NO
+$ ENDIF
+$ GOTO CONFIG_LOG_LOOP1
+$ CONFIG_LOG_LOOP1_END:
+$
+$! Apply cascading disable rules
+$ CONFIG_DISABLE_I = 0
+$ CONFIG_DISABLE_LOOP0:
+$ CONFIG_DISABLE_E = F$EDIT(F$ELEMENT(CONFIG_DISABLE_I,";",CONFIG_DISABLE_RULES),"TRIM")
+$ CONFIG_DISABLE_I = CONFIG_DISABLE_I + 1
+$ IF CONFIG_DISABLE_E .EQS. "" THEN GOTO CONFIG_DISABLE_LOOP0
+$ IF CONFIG_DISABLE_E .EQS. ";" THEN GOTO CONFIG_DISABLE_LOOP0_END
+$
+$ CONFIG_DISABLE_ALGOS = F$EDIT(F$ELEMENT(0,"/",CONFIG_DISABLE_E),"TRIM")
+$ CONFIG_DISABLE_DEPENDENTS = F$EDIT(F$ELEMENT(1,"/",CONFIG_DISABLE_E),"TRIM")
+$ TO_DISABLE := YES
+$ CONFIG_ALGO_I = 0
+$ CONFIG_DISABLE_LOOP1:
+$ CONFIG_ALGO_E = F$EDIT(F$ELEMENT(CONFIG_ALGO_I,",",CONFIG_DISABLE_ALGOS),"TRIM")
+$ CONFIG_ALGO_I = CONFIG_ALGO_I + 1
+$ IF CONFIG_ALGO_E .EQS. "" THEN GOTO CONFIG_DISABLE_LOOP1
+$ IF CONFIG_ALGO_E .EQS. "," THEN GOTO CONFIG_DISABLE_LOOP1_END
+$ IF F$TYPE(CONFIG_DISABLED_'CONFIG_ALGO_E') .EQS. ""
+$ THEN
+$ TO_DISABLE := NO
+$ ELSE
+$ IF .NOT. CONFIG_DISABLED_'CONFIG_ALGO_E' THEN TO_DISABLE := NO
+$ ENDIF
+$ GOTO CONFIG_DISABLE_LOOP1
+$ CONFIG_DISABLE_LOOP1_END:
+$
+$ IF TO_DISABLE
+$ THEN
+$ CONFIG_DEPENDENT_I = 0
+$ CONFIG_DISABLE_LOOP2:
+$ CONFIG_DEPENDENT_E = F$EDIT(F$ELEMENT(CONFIG_DEPENDENT_I,",",CONFIG_DISABLE_DEPENDENTS),"TRIM")
+$ CONFIG_DEPENDENT_I = CONFIG_DEPENDENT_I + 1
+$ IF CONFIG_DEPENDENT_E .EQS. "" THEN GOTO CONFIG_DISABLE_LOOP2
+$ IF CONFIG_DEPENDENT_E .EQS. "," THEN GOTO CONFIG_DISABLE_LOOP2_END
+$ CONFIG_DISABLED_'CONFIG_DEPENDENT_E' := YES
+$ CONFIG_ENABLED_'CONFIG_DEPENDENT_E' := NO
+$ ! Better not to assume defaults at this point...
+$ CONFIG_CHANGED_'CONFIG_DEPENDENT_E' := YES
+$ WRITE SYS$ERROR "''CONFIG_DEPENDENT_E' disabled by rule ''CONFIG_DISABLE_E'"
+$ GOTO CONFIG_DISABLE_LOOP2
+$ CONFIG_DISABLE_LOOP2_END:
+$ ENDIF
+$ GOTO CONFIG_DISABLE_LOOP0
+$ CONFIG_DISABLE_LOOP0_END:
+$
+$! Apply cascading enable rules
+$ CONFIG_ENABLE_I = 0
+$ CONFIG_ENABLE_LOOP0:
+$ CONFIG_ENABLE_E = F$EDIT(F$ELEMENT(CONFIG_ENABLE_I,";",CONFIG_ENABLE_RULES),"TRIM")
+$ CONFIG_ENABLE_I = CONFIG_ENABLE_I + 1
+$ IF CONFIG_ENABLE_E .EQS. "" THEN GOTO CONFIG_ENABLE_LOOP0
+$ IF CONFIG_ENABLE_E .EQS. ";" THEN GOTO CONFIG_ENABLE_LOOP0_END
+$
+$ CONFIG_ENABLE_ALGOS = F$EDIT(F$ELEMENT(0,"/",CONFIG_ENABLE_E),"TRIM")
+$ CONFIG_ENABLE_DEPENDENTS = F$EDIT(F$ELEMENT(1,"/",CONFIG_ENABLE_E),"TRIM")
+$ TO_ENABLE := YES
+$ CONFIG_ALGO_I = 0
+$ CONFIG_ENABLE_LOOP1:
+$ CONFIG_ALGO_E = F$EDIT(F$ELEMENT(CONFIG_ALGO_I,",",CONFIG_ENABLE_ALGOS),"TRIM")
+$ CONFIG_ALGO_I = CONFIG_ALGO_I + 1
+$ IF CONFIG_ALGO_E .EQS. "" THEN GOTO CONFIG_ENABLE_LOOP1
+$ IF CONFIG_ALGO_E .EQS. "," THEN GOTO CONFIG_ENABLE_LOOP1_END
+$ IF F$TYPE(CONFIG_ENABLED_'CONFIG_ALGO_E') .EQS. ""
+$ THEN
+$ TO_ENABLE := NO
+$ ELSE
+$ IF .NOT. CONFIG_ENABLED_'CONFIG_ALGO_E' THEN TO_ENABLE := NO
+$ ENDIF
+$ GOTO CONFIG_ENABLE_LOOP1
+$ CONFIG_ENABLE_LOOP1_END:
+$
+$ IF TO_ENABLE
+$ THEN
+$ CONFIG_DEPENDENT_I = 0
+$ CONFIG_ENABLE_LOOP2:
+$ CONFIG_DEPENDENT_E = F$EDIT(F$ELEMENT(CONFIG_DEPENDENT_I,",",CONFIG_ENABLE_DEPENDENTS),"TRIM")
+$ CONFIG_DEPENDENT_I = CONFIG_DEPENDENT_I + 1
+$ IF CONFIG_DEPENDENT_E .EQS. "" THEN GOTO CONFIG_ENABLE_LOOP2
+$ IF CONFIG_DEPENDENT_E .EQS. "," THEN GOTO CONFIG_ENABLE_LOOP2_END
+$ CONFIG_DISABLED_'CONFIG_DEPENDENT_E' := NO
+$ CONFIG_ENABLED_'CONFIG_DEPENDENT_E' := YES
+$ ! Better not to assume defaults at this point...
+$ CONFIG_CHANGED_'CONFIG_DEPENDENT_E' := YES
+$ WRITE SYS$ERROR "''CONFIG_DEPENDENT_E' enabled by rule ''CONFIG_ENABLE_E'"
+$ GOTO CONFIG_ENABLE_LOOP2
+$ CONFIG_ENABLE_LOOP2_END:
+$ ENDIF
+$ GOTO CONFIG_ENABLE_LOOP0
+$ CONFIG_ENABLE_LOOP0_END:
+$
+$! Write to the configuration
+$ CONFIG_LOG_I = 0
+$ CONFIG_LOG_LOOP2:
+$ CONFIG_LOG_E = F$EDIT(F$ELEMENT(CONFIG_LOG_I,",",CONFIG_LOGICALS),"TRIM")
+$ CONFIG_LOG_I = CONFIG_LOG_I + 1
+$ IF CONFIG_LOG_E .EQS. "" THEN GOTO CONFIG_LOG_LOOP2
+$ IF CONFIG_LOG_E .EQS. "," THEN GOTO CONFIG_LOG_LOOP2_END
+$ IF CONFIG_CHANGED_'CONFIG_LOG_E'
+$ THEN
+$ IF CONFIG_DISABLED_'CONFIG_LOG_E'
+$ THEN
+$ WRITE H_FILE "#ifndef OPENSSL_NO_",CONFIG_LOG_E
+$ WRITE H_FILE "# define OPENSSL_NO_",CONFIG_LOG_E
+$ WRITE H_FILE "#endif"
+$ ELSE
+$ WRITE H_FILE "#ifndef OPENSSL_",CONFIG_LOG_E
+$ WRITE H_FILE "# define OPENSSL_",CONFIG_LOG_E
+$ WRITE H_FILE "#endif"
+$ ENDIF
+$ ENDIF
+$ GOTO CONFIG_LOG_LOOP2
+$ CONFIG_LOG_LOOP2_END:
+$!
+$! Add in the common "crypto/opensslconf.h.in".
+$!
+$ TYPE 'OPENSSLCONF_H_IN' /OUTPUT=H_FILE:
+$!
+$ IF ARCH .NES. "VAX"
+$ THEN
+$!
+$! Write the non-VAX specific data
+$!
+$ WRITE H_FILE "#if defined(HEADER_RC4_H)"
+$ WRITE H_FILE "#undef RC4_INT"
+$ WRITE H_FILE "#define RC4_INT unsigned int"
+$ WRITE H_FILE "#undef RC4_CHUNK"
+$ WRITE H_FILE "#define RC4_CHUNK unsigned long long"
+$ WRITE H_FILE "#endif"
+$!
+$ WRITE H_FILE "#if defined(HEADER_DES_LOCL_H)"
+$ WRITE H_FILE "#undef DES_LONG"
+$ WRITE H_FILE "#define DES_LONG unsigned int"
+$ WRITE H_FILE "#undef DES_PTR"
+$ WRITE H_FILE "#define DES_PTR"
+$ WRITE H_FILE "#undef DES_RISC1"
+$ WRITE H_FILE "#undef DES_RISC2"
+$ WRITE H_FILE "#define DES_RISC1"
+$ WRITE H_FILE "#undef DES_UNROLL"
+$ WRITE H_FILE "#define DES_UNROLL"
+$ WRITE H_FILE "#endif"
+$!
+$ WRITE H_FILE "#if defined(HEADER_BN_H)"
+$ WRITE H_FILE "#undef BN_LLONG" ! Never define with SIXTY_FOUR_BIT
+$ WRITE H_FILE "#undef SIXTY_FOUR_BIT_LONG"
+$ WRITE H_FILE "#undef SIXTY_FOUR_BIT"
+$ WRITE H_FILE "#define SIXTY_FOUR_BIT"
+$ WRITE H_FILE "#undef THIRTY_TWO_BIT"
+$ WRITE H_FILE "#undef SIXTEEN_BIT"
+$ WRITE H_FILE "#undef EIGHT_BIT"
+$ WRITE H_FILE "#endif"
+$
+$ WRITE H_FILE "#undef OPENSSL_EXPORT_VAR_AS_FUNCTION"
+$!
+$! Else...
+$!
+$ ELSE
+$!
+$! Write the VAX specific data
+$!
+$ WRITE H_FILE "#if defined(HEADER_RC4_H)"
+$ WRITE H_FILE "#undef RC4_INT"
+$ WRITE H_FILE "#define RC4_INT unsigned char"
+$ WRITE H_FILE "#undef RC4_CHUNK"
+$ WRITE H_FILE "#define RC4_CHUNK unsigned long"
+$ WRITE H_FILE "#endif"
+$!
+$ WRITE H_FILE "#if defined(HEADER_DES_LOCL_H)"
+$ WRITE H_FILE "#undef DES_LONG"
+$ WRITE H_FILE "#define DES_LONG unsigned long"
+$ WRITE H_FILE "#undef DES_PTR"
+$ WRITE H_FILE "#define DES_PTR"
+$ WRITE H_FILE "#undef DES_RISC1"
+$ WRITE H_FILE "#undef DES_RISC2"
+$ WRITE H_FILE "#undef DES_UNROLL"
+$ WRITE H_FILE "#endif"
+$!
+$ WRITE H_FILE "#if defined(HEADER_BN_H)"
+$ WRITE H_FILE "#undef BN_LLONG" ! VAX C/DEC C doesn't have long long
+$ WRITE H_FILE "#undef SIXTY_FOUR_BIT_LONG"
+$ WRITE H_FILE "#undef SIXTY_FOUR_BIT"
+$ WRITE H_FILE "#undef THIRTY_TWO_BIT"
+$ WRITE H_FILE "#define THIRTY_TWO_BIT"
+$ WRITE H_FILE "#undef SIXTEEN_BIT"
+$ WRITE H_FILE "#undef EIGHT_BIT"
+$ WRITE H_FILE "#endif"
+$!
+$! Oddly enough, the following symbol is tested in crypto/sha/sha512.c
+$! before sha.h gets included (and HEADER_SHA_H defined), so we will not
+$! protect this one...
+$ WRITE H_FILE "#undef OPENSSL_NO_SHA512"
+$ WRITE H_FILE "#define OPENSSL_NO_SHA512"
+$!
+$ WRITE H_FILE "#undef OPENSSL_EXPORT_VAR_AS_FUNCTION"
+$ WRITE H_FILE "#define OPENSSL_EXPORT_VAR_AS_FUNCTION"
+$!
+$! End
+$!
+$ ENDIF
+$!
+$! Close the [.CRYPTO._xxx]OPENSSLCONF.H file
+$!
+$ CLOSE H_FILE
+$!
+$! Purge The [.CRYPTO._xxx]OPENSSLCONF.H file
+$!
+$ PURGE SYS$DISK:[.CRYPTO._'ARCH']OPENSSLCONF.H
+$!
+$! That's All, Time To RETURN.
+$!
+$ RETURN
+$!
+$! Rebuild The "[.CRYPTO._xxx]BUILDINF.H" file.
+$!
+$ BUILDINF:
+$!
+$! Tell The User We Are Creating The [.CRYPTO._xxx]BUILDINF.H File.
+$!
+$ WRITE SYS$OUTPUT "Creating [.CRYPTO._''ARCH']BUILDINF.H Include File."
+$!
+$! Create The [.CRYPTO._xxx]BUILDINF.H File.
+$!
+$ BIH_NAME = "SYS$DISK:[.CRYPTO._''ARCH']BUILDINF.H"
+$ CREATE /FDL=SYS$INPUT: 'BIH_NAME'
+RECORD
+ FORMAT stream_lf
+$!
+$ OPEN /APPEND H_FILE 'bih_name'
+$!
+$! Get The Current Date & Time.
+$!
+$ TIME = F$TIME()
+$!
+$! Write The [.CRYPTO._xxx]BUILDINF.H File.
+$!
+$ WRITE H_FILE "#define CFLAGS ""/POINTER_SIZE=''POINTER_SIZE'"""
+$ WRITE H_FILE "#define PLATFORM ""VMS ''ARCH' ''VMS_VERSION'"""
+$ WRITE H_FILE "#define DATE ""''TIME'"" "
+$!
+$! Close The [.CRYPTO._xxx]BUILDINF.H File.
+$!
+$ CLOSE H_FILE
+$!
+$! Purge The [.CRYPTO._xxx]BUILDINF.H File.
+$!
+$ PURGE SYS$DISK:[.CRYPTO._'ARCH']BUILDINF.H
+$!
+$! Delete [.CRYPTO]BUILDINF.H File, as there might be some residue from Unix.
+$!
+$ IF F$SEARCH("[.CRYPTO]BUILDINF.H") .NES. "" THEN -
+ DELETE SYS$DISK:[.CRYPTO]BUILDINF.H;*
+$!
+$! That's All, Time To RETURN.
+$!
+$ RETURN
+$!
+$! Copy a lot of files around.
+$!
+$ SOFTLINKS:
+$!
+$! Tell The User We Are Partly Rebuilding The [.APPS] Directory.
+$!
+$ WRITE SYS$OUTPUT "Rebuilding The '[.APPS]MD4.C' File."
+$!
+$ DELETE SYS$DISK:[.APPS]MD4.C;*
+$!
+$! Copy MD4.C from [.CRYPTO.MD4] into [.APPS]
+$!
+$ COPY SYS$DISK:[.CRYPTO.MD4]MD4.C SYS$DISK:[.APPS]
+$!
+$! Tell The User We Are Rebuilding The [.INCLUDE.OPENSSL] Directory.
+$!
+$ WRITE SYS$OUTPUT "Rebuilding The '[.INCLUDE.OPENSSL]' Directory."
+$!
+$! First, make sure the directory exists
+$!
+$ IF F$PARSE("SYS$DISK:[.INCLUDE.OPENSSL]") .EQS. "" THEN -
+ CREATE/DIRECTORY SYS$DISK:[.INCLUDE.OPENSSL]
+$!
+$! Copy All The ".H" Files From The Main Directory.
+$!
+$ EXHEADER := e_os2.h
+$ COPY 'EXHEADER' SYS$DISK:[.INCLUDE.OPENSSL]
+$!
+$! Copy All The ".H" Files From The [.CRYPTO] Directory Tree.
+$!
+$ SDIRS := ,-
+ _'ARCH',-
+ OBJECTS,-
+ MD2,MD4,MD5,SHA,MDC2,HMAC,RIPEMD,WHRLPOOL,-
+ DES,AES,RC2,RC4,RC5,IDEA,BF,CAST,CAMELLIA,SEED,MODES,-
+ BN,EC,RSA,DSA,ECDSA,DH,ECDH,DSO,ENGINE,-
+ BUFFER,BIO,STACK,LHASH,RAND,ERR,-
+ EVP,ASN1,PEM,X509,X509V3,CONF,TXT_DB,PKCS7,PKCS12,COMP,OCSP,UI,KRB5,-
+ STORE,CMS,PQUEUE,TS,JPAKE
+$ EXHEADER_ := crypto.h,opensslv.h,ebcdic.h,symhacks.h,ossl_typ.h
+$ EXHEADER__'ARCH' := opensslconf.h
+$ EXHEADER_OBJECTS := objects.h,obj_mac.h
+$ EXHEADER_MD2 := md2.h
+$ EXHEADER_MD4 := md4.h
+$ EXHEADER_MD5 := md5.h
+$ EXHEADER_SHA := sha.h
+$ EXHEADER_MDC2 := mdc2.h
+$ EXHEADER_HMAC := hmac.h
+$ EXHEADER_RIPEMD := ripemd.h
+$ EXHEADER_WHRLPOOL := whrlpool.h
+$ EXHEADER_DES := des.h,des_old.h
+$ EXHEADER_AES := aes.h
+$ EXHEADER_RC2 := rc2.h
+$ EXHEADER_RC4 := rc4.h
+$ EXHEADER_RC5 := rc5.h
+$ EXHEADER_IDEA := idea.h
+$ EXHEADER_BF := blowfish.h
+$ EXHEADER_CAST := cast.h
+$ EXHEADER_CAMELLIA := camellia.h
+$ EXHEADER_SEED := seed.h
+$ EXHEADER_MODES := modes.h
+$ EXHEADER_BN := bn.h
+$ EXHEADER_EC := ec.h
+$ EXHEADER_RSA := rsa.h
+$ EXHEADER_DSA := dsa.h
+$ EXHEADER_ECDSA := ecdsa.h
+$ EXHEADER_DH := dh.h
+$ EXHEADER_ECDH := ecdh.h
+$ EXHEADER_DSO := dso.h
+$ EXHEADER_ENGINE := engine.h
+$ EXHEADER_BUFFER := buffer.h
+$ EXHEADER_BIO := bio.h
+$ EXHEADER_STACK := stack.h,safestack.h
+$ EXHEADER_LHASH := lhash.h
+$ EXHEADER_RAND := rand.h
+$ EXHEADER_ERR := err.h
+$ EXHEADER_EVP := evp.h
+$ EXHEADER_ASN1 := asn1.h,asn1_mac.h,asn1t.h
+$ EXHEADER_PEM := pem.h,pem2.h
+$ EXHEADER_X509 := x509.h,x509_vfy.h
+$ EXHEADER_X509V3 := x509v3.h
+$ EXHEADER_CONF := conf.h,conf_api.h
+$ EXHEADER_TXT_DB := txt_db.h
+$ EXHEADER_PKCS7 := pkcs7.h
+$ EXHEADER_PKCS12 := pkcs12.h
+$ EXHEADER_COMP := comp.h
+$ EXHEADER_OCSP := ocsp.h
+$ EXHEADER_UI := ui.h,ui_compat.h
+$ EXHEADER_KRB5 := krb5_asn.h
+$!EXHEADER_STORE := store.h,str_compat.h
+$ EXHEADER_STORE := store.h
+$ EXHEADER_CMS := cms.h
+$ EXHEADER_PQUEUE := pqueue.h
+$ EXHEADER_TS := ts.h
+$ EXHEADER_JPAKE := jpake.h
+$
+$ I = 0
+$ LOOP_SDIRS:
+$ D = F$EDIT(F$ELEMENT(I, ",", SDIRS),"TRIM")
+$ I = I + 1
+$ IF D .EQS. "," THEN GOTO LOOP_SDIRS_END
+$ tmp = EXHEADER_'D'
+$ IF D .EQS. ""
+$ THEN
+$ COPY [.CRYPTO]'tmp' SYS$DISK:[.INCLUDE.OPENSSL] !/LOG
+$ ELSE
+$ COPY [.CRYPTO.'D']'tmp' SYS$DISK:[.INCLUDE.OPENSSL] !/LOG
+$ ENDIF
+$ GOTO LOOP_SDIRS
+$ LOOP_SDIRS_END:
+$!
+$! Copy All The ".H" Files From The [.SSL] Directory.
+$!
+$ EXHEADER := ssl.h,ssl2.h,ssl3.h,ssl23.h,tls1.h,dtls1.h,kssl.h
+$ COPY SYS$DISK:[.SSL]'EXHEADER' SYS$DISK:[.INCLUDE.OPENSSL]
+$!
+$! Purge all doubles
+$!
+$ PURGE SYS$DISK:[.INCLUDE.OPENSSL]*.H
+$!
+$! That's All, Time To RETURN.
+$!
+$ RETURN
+$!
+$! Build The "[.xxx.EXE.CRYPTO]LIBCRYPTO''LIB32'.OLB" Library.
+$!
+$ CRYPTO:
+$!
+$! Tell The User What We Are Doing.
+$!
+$ WRITE SYS$OUTPUT ""
+$ WRITE SYS$OUTPUT "Building The [.",ARCH,".EXE.CRYPTO]LIBCRYPTO''LIB32'.OLB Library."
+$!
+$! Go To The [.CRYPTO] Directory.
+$!
+$ SET DEFAULT SYS$DISK:[.CRYPTO]
+$!
+$! Build The [.xxx.EXE.CRYPTO]LIBCRYPTO.OLB Library.
+$!
+$ @CRYPTO-LIB LIBRARY 'DEBUGGER' "''COMPILER'" "''TCPIP_TYPE'" "''ISSEVEN'" "''BUILDPART'" "''POINTER_SIZE'"
+$!
+$! Build The [.xxx.EXE.CRYPTO]*.EXE Test Applications.
+$!
+$ @CRYPTO-LIB APPS 'DEBUGGER' "''COMPILER'" "''TCPIP_TYPE'" "''ISSEVEN'" "''BUILDPART'" "''POINTER_SIZE'"
+$!
+$! Go Back To The Main Directory.
+$!
+$ SET DEFAULT [-]
+$!
+$! Time To RETURN.
+$!
+$ RETURN
+$!
+$! Build The "[.xxx.EXE.SSL]LIBSSL''LIB32'.OLB" Library.
+$!
+$ SSL:
+$!
+$! Tell The User What We Are Doing.
+$!
+$ WRITE SYS$OUTPUT ""
+$ WRITE SYS$OUTPUT "Building The [.",ARCH,".EXE.SSL]LIBSSL''LIB32'.OLB Library."
+$!
+$! Go To The [.SSL] Directory.
+$!
+$ SET DEFAULT SYS$DISK:[.SSL]
+$!
+$! Build The [.xxx.EXE.SSL]LIBSSL.OLB Library.
+$!
+$ @SSL-LIB LIBRARY 'DEBUGGER' "''COMPILER'" "''TCPIP_TYPE'" "''ISSEVEN'" "''POINTER_SIZE'"
+$!
+$! Go Back To The Main Directory.
+$!
+$ SET DEFAULT [-]
+$!
+$! Time To Return.
+$!
+$ RETURN
+$!
+$! Build The "[.xxx.EXE.SSL]SSL_TASK.EXE" Program.
+$!
+$ SSL_TASK:
+$!
+$! Tell The User What We Are Doing.
+$!
+$ WRITE SYS$OUTPUT ""
+$ WRITE SYS$OUTPUT "Building DECNet Based SSL Engine, [.",ARCH,".EXE.SSL]SSL_TASK.EXE"
+$!
+$! Go To The [.SSL] Directory.
+$!
+$ SET DEFAULT SYS$DISK:[.SSL]
+$!
+$! Build The [.xxx.EXE.SSL]SSL_TASK.EXE
+$!
+$ @SSL-LIB SSL_TASK 'DEBUGGER' "''COMPILER'" "''TCPIP_TYPE'" "''ISSEVEN'" "''POINTER_SIZE'"
+$!
+$! Go Back To The Main Directory.
+$!
+$ SET DEFAULT [-]
+$!
+$! That's All, Time To RETURN.
+$!
+$ RETURN
+$!
+$! Build The OpenSSL Test Programs.
+$!
+$ TEST:
+$!
+$! Tell The User What We Are Doing.
+$!
+$ WRITE SYS$OUTPUT ""
+$ WRITE SYS$OUTPUT "Building The OpenSSL [.",ARCH,".EXE.TEST] Test Utilities."
+$!
+$! Go To The [.TEST] Directory.
+$!
+$ SET DEFAULT SYS$DISK:[.TEST]
+$!
+$! Build The Test Programs.
+$!
+$ @MAKETESTS 'DEBUGGER' "''COMPILER'" "''TCPIP_TYPE'" "''ISSEVEN'" "''POINTER_SIZE'"
+$!
+$! Go Back To The Main Directory.
+$!
+$ SET DEFAULT [-]
+$!
+$! That's All, Time To RETURN.
+$!
+$ RETURN
+$!
+$! Build The OpenSSL Application Programs.
+$!
+$ APPS:
+$!
+$! Tell The User What We Are Doing.
+$!
+$ WRITE SYS$OUTPUT ""
+$ WRITE SYS$OUTPUT "Building OpenSSL [.",ARCH,".EXE.APPS] Applications."
+$!
+$! Go To The [.APPS] Directory.
+$!
+$ SET DEFAULT SYS$DISK:[.APPS]
+$!
+$! Build The Application Programs.
+$!
+$ @MAKEAPPS 'DEBUGGER' "''COMPILER'" "''TCPIP_TYPE'" "''ISSEVEN'" "" "''POINTER_SIZE'"
+$!
+$! Go Back To The Main Directory.
+$!
+$ SET DEFAULT [-]
+$!
+$! That's All, Time To RETURN.
+$!
+$ RETURN
+$!
+$! Build The OpenSSL Application Programs.
+$!
+$ ENGINES:
+$!
+$! Tell The User What We Are Doing.
+$!
+$ WRITE SYS$OUTPUT ""
+$ WRITE SYS$OUTPUT "Building OpenSSL [.",ARCH,".EXE.ENGINES] Engines."
+$!
+$! Go To The [.ENGINES] Directory.
+$!
+$ SET DEFAULT SYS$DISK:[.ENGINES]
+$!
+$! Build The Application Programs.
+$!
+$ @MAKEENGINES ENGINES 'DEBUGGER' "''COMPILER'" "''TCPIP_TYPE'" "''ISSEVEN'" "''BUILDPART'" "''POINTER_SIZE'"
+$!
+$! Go Back To The Main Directory.
+$!
+$ SET DEFAULT [-]
+$!
+$! That's All, Time To RETURN.
+$!
+$ RETURN
+$!
+$! Check The User's Options.
+$!
+$ CHECK_OPTIONS:
+$!
+$! Check if there's a "part", and separate it out
+$!
+$ BUILDPART = F$ELEMENT(1,"/",P1)
+$ IF BUILDPART .EQS. "/"
+$ THEN
+$ BUILDPART = ""
+$ ELSE
+$ P1 = F$EXTRACT(0,F$LENGTH(P1) - F$LENGTH(BUILDPART) - 1, P1)
+$ ENDIF
+$!
+$! Check To See If P1 Is Blank.
+$!
+$ IF (P1.EQS."ALL")
+$ THEN
+$!
+$! P1 Is ALL, So Build Everything.
+$!
+$ BUILDCOMMAND = "ALL"
+$!
+$! Else...
+$!
+$ ELSE
+$!
+$! Else, Check To See If P1 Has A Valid Argument.
+$!
+$ IF (P1.EQS."CONFIG").OR.(P1.EQS."BUILDINF").OR.(P1.EQS."SOFTLINKS") -
+ .OR.(P1.EQS."BUILDALL") -
+ .OR.(P1.EQS."CRYPTO").OR.(P1.EQS."SSL") -
+ .OR.(P1.EQS."SSL_TASK").OR.(P1.EQS."TEST").OR.(P1.EQS."APPS") -
+ .OR.(P1.EQS."ENGINES")
+$ THEN
+$!
+$! A Valid Argument.
+$!
+$ BUILDCOMMAND = P1
+$!
+$! Else...
+$!
+$ ELSE
+$!
+$! Tell The User We Don't Know What They Want.
+$!
+$ WRITE SYS$OUTPUT ""
+$ WRITE SYS$OUTPUT "USAGE: @MAKEVMS.COM [Target] [Pointer size] [Debug option] <Compiler>"
+$ WRITE SYS$OUTPUT ""
+$ WRITE SYS$OUTPUT "Example: @MAKEVMS.COM ALL """" NODEBUG "
+$ WRITE SYS$OUTPUT ""
+$ WRITE SYS$OUTPUT "The Target ",P1," Is Invalid. The Valid Target Options Are:"
+$ WRITE SYS$OUTPUT ""
+$ WRITE SYS$OUTPUT " ALL : Just Build Everything."
+$ WRITE SYS$OUTPUT " CONFIG : Just build the [.CRYPTO._xxx]OPENSSLCONF.H file."
+$ WRITE SYS$OUTPUT " BUILDINF : Just build the [.CRYPTO._xxx]BUILDINF.H file."
+$ WRITE SYS$OUTPUT " SOFTLINKS: Just Fix The Unix soft links."
+$ WRITE SYS$OUTPUT " BUILDALL : Same as ALL, except CONFIG, BUILDINF and SOFTILNKS aren't done."
+$ WRITE SYS$OUTPUT " CRYPTO : To Build Just The [.xxx.EXE.CRYPTO]LIBCRYPTO.OLB Library."
+$ WRITE SYS$OUTPUT " CRYPTO/x : To Build Just The x Part Of The"
+$ WRITE SYS$OUTPUT " [.xxx.EXE.CRYPTO]LIBCRYPTO.OLB Library."
+$ WRITE SYS$OUTPUT " SSL : To Build Just The [.xxx.EXE.SSL]LIBSSL.OLB Library."
+$ WRITE SYS$OUTPUT " SSL_TASK : To Build Just The [.xxx.EXE.SSL]SSL_TASK.EXE Program."
+$ WRITE SYS$OUTPUT " TEST : To Build Just The OpenSSL Test Programs."
+$ WRITE SYS$OUTPUT " APPS : To Build Just The OpenSSL Application Programs."
+$ WRITE SYS$OUTPUT " ENGINES : To Build Just The ENGINES"
+$ WRITE SYS$OUTPUT ""
+$ WRITE SYS$OUTPUT " Where 'xxx' Stands For:"
+$ WRITE SYS$OUTPUT ""
+$ WRITE SYS$OUTPUT " ALPHA : Alpha Architecture."
+$ WRITE SYS$OUTPUT " IA64 : IA64 Architecture."
+$ WRITE SYS$OUTPUT " VAX : VAX Architecture."
+$ WRITE SYS$OUTPUT ""
+$!
+$! Time To EXIT.
+$!
+$ GOTO TIDY
+$!
+$! End The Valid Argument Check.
+$!
+$ ENDIF
+$!
+$! End The P1 Check.
+$!
+$ ENDIF
+$!
+$! Check To See If P2 Is Blank.
+$!
+$ IF (P2.EQS."")
+$ THEN
+$ POINTER_SIZE = ""
+$ ELSE
+$!
+$! Check is P2 Is Valid
+$!
+$ IF (P2.EQS."32")
+$ THEN
+$ POINTER_SIZE = "32"
+$ IF ARCH .EQS. "VAX"
+$ THEN
+$ LIB32 = ""
+$ ELSE
+$ LIB32 = "32"
+$ ENDIF
+$ ELSE
+$ IF (P2.EQS."64")
+$ THEN
+$ LIB32 = ""
+$ IF ARCH .EQS. "VAX"
+$ THEN
+$ POINTER_SIZE = "32"
+$ ELSE
+$ POINTER_SIZE = "64"
+$ ENDIF
+$ ELSE
+$!
+$! Tell The User Entered An Invalid Option..
+$!
+$ WRITE SYS$OUTPUT ""
+$ WRITE SYS$OUTPUT "The Option ",P2," Is Invalid. The Valid Options Are:"
+$ WRITE SYS$OUTPUT ""
+$ WRITE SYS$OUTPUT " 32 : Compile with 32 bit pointer size"
+$ WRITE SYS$OUTPUT " 64 : Compile with 64 bit pointer size"
+$ WRITE SYS$OUTPUT ""
+$!
+$! Time To EXIT.
+$!
+$ GOTO TIDY
+$!
+$! End The Valid Arguement Check.
+$!
+$ ENDIF
+$ ENDIF
+$!
+$! End The P2 Check.
+$!
+$ ENDIF
+$!
+$! Check To See If P3 Is Blank.
+$!
+$ IF (P3.EQS."NODEBUG")
+$ THEN
+$!
+$! P3 Is NODEBUG, So Compile Without Debugger Information.
+$!
+$ DEBUGGER = "NODEBUG"
+$!
+$! Else...
+$!
+$ ELSE
+$!
+$! Check To See If We Are To Compile With Debugger Information.
+$!
+$ IF (P3.EQS."DEBUG")
+$ THEN
+$!
+$! Compile With Debugger Information.
+$!
+$ DEBUGGER = "DEBUG"
+$!
+$! Else...
+$!
+$ ELSE
+$!
+$! Tell The User Entered An Invalid Option..
+$!
+$ WRITE SYS$OUTPUT ""
+$ WRITE SYS$OUTPUT "The Option ",P3," Is Invalid. The Valid Options Are:"
+$ WRITE SYS$OUTPUT ""
+$ WRITE SYS$OUTPUT " DEBUG : Compile With The Debugger Information."
+$ WRITE SYS$OUTPUT " NODEBUG : Compile Without The Debugger Information."
+$ WRITE SYS$OUTPUT ""
+$!
+$! Time To EXIT.
+$!
+$ GOTO TIDY
+$!
+$! End The Valid Argument Check.
+$!
+$ ENDIF
+$!
+$! End The P3 Check.
+$!
+$ ENDIF
+$!
+$! Check To See If P4 Is Blank.
+$!
+$ IF (P4.EQS."")
+$ THEN
+$!
+$! O.K., The User Didn't Specify A Compiler, Let's Try To
+$! Find Out Which One To Use.
+$!
+$! Check To See If We Have GNU C.
+$!
+$ IF (F$TRNLNM("GNU_CC").NES."")
+$ THEN
+$!
+$! Looks Like GNUC, Set To Use GNUC.
+$!
+$ COMPILER = "GNUC"
+$!
+$! Tell The User We Are Using GNUC.
+$!
+$ WRITE SYS$OUTPUT "Using GNU 'C' Compiler."
+$!
+$! End The GNU C Compiler Check.
+$!
+$ ENDIF
+$!
+$! Check To See If We Have VAXC Or DECC.
+$!
+$ IF (F$GETSYI("CPU").GE.128).OR.(F$TRNLNM("DECC$CC_DEFAULT").EQS."/DECC")
+$ THEN
+$!
+$! Looks Like DECC, Set To Use DECC.
+$!
+$ COMPILER = "DECC"
+$!
+$! Tell The User We Are Using DECC.
+$!
+$ WRITE SYS$OUTPUT "Using DECC 'C' Compiler."
+$!
+$! Else...
+$!
+$ ELSE
+$!
+$! Looks Like VAXC, Set To Use VAXC.
+$!
+$ COMPILER = "VAXC"
+$!
+$! Tell The User We Are Using VAX C.
+$!
+$ WRITE SYS$OUTPUT "Using VAXC 'C' Compiler."
+$!
+$! End The DECC & VAXC Compiler Check.
+$!
+$ ENDIF
+$!
+$! Else...
+$!
+$ ELSE
+$!
+$! Check To See If The User Entered A Valid Paramter.
+$!
+$ IF (P4.EQS."VAXC").OR.(P4.EQS."DECC").OR.(P4.EQS."GNUC")!.OR.(P4.EQS."LINK")
+$ THEN
+$!
+$! Check To See If The User Wanted To Just LINK.
+$!
+$ IF (P4.EQS."LINK")
+$ THEN
+$!
+$! Looks Like LINK-only
+$!
+$ COMPILER = "LINK"
+$!
+$! Tell The User We Are Only Linking.
+$!
+$ WRITE SYS$OUTPUT "LINK Only. This actually NOT YET SUPPORTED!"
+$!
+$! End LINK Check.
+$!
+$ ENDIF
+$!
+$! Check To See If The User Wanted DECC.
+$!
+$ IF (P4.EQS."DECC")
+$ THEN
+$!
+$! Looks Like DECC, Set To Use DECC.
+$!
+$ COMPILER = "DECC"
+$!
+$! Tell The User We Are Using DECC.
+$!
+$ WRITE SYS$OUTPUT "Using DECC 'C' Compiler."
+$!
+$! End DECC Check.
+$!
+$ ENDIF
+$!
+$! Check To See If We Are To Use VAXC.
+$!
+$ IF (P4.EQS."VAXC")
+$ THEN
+$!
+$! Looks Like VAXC, Set To Use VAXC.
+$!
+$ COMPILER = "VAXC"
+$!
+$! Tell The User We Are Using VAX C.
+$!
+$ WRITE SYS$OUTPUT "Using VAXC 'C' Compiler."
+$!
+$! End VAXC Check
+$!
+$ ENDIF
+$!
+$! Check To See If We Are To Use GNU C.
+$!
+$ IF (P4.EQS."GNUC")
+$ THEN
+$!
+$! Looks Like GNUC, Set To Use GNUC.
+$!
+$ COMPILER = "GNUC"
+$!
+$! Tell The User We Are Using GNUC.
+$!
+$ WRITE SYS$OUTPUT "Using GNU 'C' Compiler."
+$!
+$! End The GNU C Check.
+$!
+$ ENDIF
+$!
+$! Else The User Entered An Invalid Argument.
+$!
+$ ELSE
+$!
+$! Tell The User We Don't Know What They Want.
+$!
+$ WRITE SYS$OUTPUT ""
+$ WRITE SYS$OUTPUT "The Option ",P4," Is Invalid. The Valid Options Are:"
+$ WRITE SYS$OUTPUT ""
+$ WRITE SYS$OUTPUT " VAXC : To Compile With VAX C."
+$ WRITE SYS$OUTPUT " DECC : To Compile With DEC C."
+$ WRITE SYS$OUTPUT " GNUC : To Compile With GNU C."
+$ WRITE SYS$OUTPUT ""
+$!
+$! Time To EXIT.
+$!
+$ GOTO TIDY
+$!
+$! End The Valid Argument Check.
+$!
+$ ENDIF
+$!
+$! End The P4 Check.
+$!
+$ ENDIF
+$!
+$! Time to check the contents of P5, and to make sure we get the correct library.
+$!
+$ IF P5.EQS."SOCKETSHR" .OR. P5.EQS."MULTINET" .OR. P5.EQS."UCX" -
+ .OR. P5.EQS."TCPIP" .OR. P5.EQS."NONE"
+$ THEN
+$!
+$! Check to see if SOCKETSHR was chosen
+$!
+$ IF P5.EQS."SOCKETSHR"
+$ THEN
+$!
+$! Set the library to use SOCKETSHR
+$!
+$ TCPIP_LIB = "SYS$DISK:[-.VMS]SOCKETSHR_SHR.OPT/OPT"
+$!
+$! Tell the user
+$!
+$ WRITE SYS$OUTPUT "Using SOCKETSHR for TCP/IP"
+$!
+$! Done with SOCKETSHR
+$!
+$ ENDIF
+$!
+$! Check to see if MULTINET was chosen
+$!
+$ IF P5.EQS."MULTINET"
+$ THEN
+$!
+$! Set the library to use UCX emulation.
+$!
+$ P5 = "UCX"
+$!
+$! Tell the user
+$!
+$ WRITE SYS$OUTPUT "Using MultiNet via UCX emulation for TCP/IP"
+$!
+$! Done with MULTINET
+$!
+$ ENDIF
+$!
+$! Check to see if UCX was chosen
+$!
+$ IF P5.EQS."UCX"
+$ THEN
+$!
+$! Set the library to use UCX.
+$!
+$ TCPIP_LIB = "SYS$DISK:[-.VMS]UCX_SHR_DECC.OPT/OPT"
+$!
+$! Tell the user
+$!
+$ WRITE SYS$OUTPUT "Using UCX or an emulation thereof for TCP/IP"
+$!
+$! Done with UCX
+$!
+$ ENDIF
+$!
+$! Check to see if TCPIP was chosen
+$!
+$ IF P5.EQS."TCPIP"
+$ THEN
+$!
+$! Set the library to use TCPIP (post UCX).
+$!
+$ TCPIP_LIB = "SYS$DISK:[-.VMS]TCPIP_SHR_DECC.OPT/OPT"
+$!
+$! Tell the user
+$!
+$ WRITE SYS$OUTPUT "Using TCPIP (post UCX) for TCP/IP"
+$!
+$! Done with TCPIP
+$!
+$ ENDIF
+$!
+$! Check to see if NONE was chosen
+$!
+$ IF P5.EQS."NONE"
+$ THEN
+$!
+$! Do not use a TCPIP library.
+$!
+$ TCPIP_LIB = ""
+$!
+$! Tell the user
+$!
+$ WRITE SYS$OUTPUT "A specific TCPIP library will not be used."
+$!
+$! Done with NONE.
+$!
+$ ENDIF
+$!
+$! Set the TCPIP_TYPE symbol
+$!
+$ TCPIP_TYPE = P5
+$!
+$! Print info
+$!
+$ WRITE SYS$OUTPUT "TCP/IP library spec: ", TCPIP_LIB
+$!
+$! Else The User Entered An Invalid Argument.
+$!
+$ ELSE
+$ IF P5 .NES. ""
+$ THEN
+$!
+$! Tell The User We Don't Know What They Want.
+$!
+$ WRITE SYS$OUTPUT ""
+$ WRITE SYS$OUTPUT "The Option ",P5," Is Invalid. The Valid Options Are:"
+$ WRITE SYS$OUTPUT ""
+$ WRITE SYS$OUTPUT " SOCKETSHR : To link with SOCKETSHR TCP/IP library."
+$ WRITE SYS$OUTPUT " UCX : To link with UCX TCP/IP library."
+$ WRITE SYS$OUTPUT " TCPIP : To link with TCPIP TCP/IP (post UCX) library."
+$ WRITE SYS$OUTPUT " NONE : To not link with a specific TCP/IP library."
+$ WRITE SYS$OUTPUT ""
+$!
+$! Time To EXIT.
+$!
+$ GOTO TIDY
+$ ELSE
+$!
+$! If TCPIP is not defined, then hardcode it to make
+$! it clear that no TCPIP is desired.
+$!
+$ IF P5 .EQS. ""
+$ THEN
+$ TCPIP_LIB = ""
+$ TCPIP_TYPE = "NONE"
+$ ELSE
+$!
+$! Set the TCPIP_TYPE symbol
+$!
+$ TCPIP_TYPE = P5
+$ ENDIF
+$ ENDIF
+$!
+$! Done with TCP/IP libraries
+$!
+$ ENDIF
+$!
+$! Special Threads For OpenVMS v7.1 Or Later
+$!
+$! Written By: Richard Levitte
+$! richard@levitte.org
+$!
+$!
+$! Check To See If We Have A Option For P6.
+$!
+$ IF (P6.EQS."")
+$ THEN
+$!
+$! Get The Version Of VMS We Are Using.
+$!
+$ ISSEVEN :=
+$ TMP = F$ELEMENT(0,"-",F$EXTRACT(1,4,VMS_VERSION))
+$ TMP = F$INTEGER(F$ELEMENT(0,".",TMP)+F$ELEMENT(1,".",TMP))
+$!
+$! Check To See If The VMS Version Is v7.1 Or Later.
+$!
+$ IF (TMP.GE.71)
+$ THEN
+$!
+$! We Have OpenVMS v7.1 Or Later, So Use The Special Threads.
+$!
+$ ISSEVEN := ,PTHREAD_USE_D4
+$!
+$! End The VMS Version Check.
+$!
+$ ENDIF
+$!
+$! End The P6 Check.
+$!
+$ ENDIF
+$!
+$! Time To RETURN...
+$!
+$ RETURN
+$!
+$ TIDY:
+$ SET DEFAULT 'DEF_ORIG'
+$ EXIT
+$!
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-06 19:02:07 +0000