diff options
Diffstat (limited to 'openssl/ssl/d1_srvr.c')
-rw-r--r-- | openssl/ssl/d1_srvr.c | 1147 |
1 files changed, 1147 insertions, 0 deletions
diff --git a/openssl/ssl/d1_srvr.c b/openssl/ssl/d1_srvr.c new file mode 100644 index 000000000..0bbf8ae7f --- /dev/null +++ b/openssl/ssl/d1_srvr.c @@ -0,0 +1,1147 @@ +/* ssl/d1_srvr.c */ +/* + * DTLS implementation written by Nagendra Modadugu + * (nagendra@cs.stanford.edu) for the OpenSSL project 2005. + */ +/* ==================================================================== + * Copyright (c) 1999-2005 The OpenSSL Project. All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * + * 3. All advertising materials mentioning features or use of this + * software must display the following acknowledgment: + * "This product includes software developed by the OpenSSL Project + * for use in the OpenSSL Toolkit. (http://www.OpenSSL.org/)" + * + * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to + * endorse or promote products derived from this software without + * prior written permission. For written permission, please contact + * openssl-core@OpenSSL.org. + * + * 5. Products derived from this software may not be called "OpenSSL" + * nor may "OpenSSL" appear in their names without prior written + * permission of the OpenSSL Project. + * + * 6. Redistributions of any form whatsoever must retain the following + * acknowledgment: + * "This product includes software developed by the OpenSSL Project + * for use in the OpenSSL Toolkit (http://www.OpenSSL.org/)" + * + * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY + * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR + * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE OpenSSL PROJECT OR + * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT + * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, + * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) + * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED + * OF THE POSSIBILITY OF SUCH DAMAGE. + * ==================================================================== + * + * This product includes cryptographic software written by Eric Young + * (eay@cryptsoft.com). This product includes software written by Tim + * Hudson (tjh@cryptsoft.com). + * + */ +/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com) + * All rights reserved. + * + * This package is an SSL implementation written + * by Eric Young (eay@cryptsoft.com). + * The implementation was written so as to conform with Netscapes SSL. + * + * This library is free for commercial and non-commercial use as long as + * the following conditions are aheared to. The following conditions + * apply to all code found in this distribution, be it the RC4, RSA, + * lhash, DES, etc., code; not just the SSL code. The SSL documentation + * included with this distribution is covered by the same copyright terms + * except that the holder is Tim Hudson (tjh@cryptsoft.com). + * + * Copyright remains Eric Young's, and as such any Copyright notices in + * the code are not to be removed. + * If this package is used in a product, Eric Young should be given attribution + * as the author of the parts of the library used. + * This can be in the form of a textual message at program startup or + * in documentation (online or textual) provided with the package. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * 3. All advertising materials mentioning features or use of this software + * must display the following acknowledgement: + * "This product includes cryptographic software written by + * Eric Young (eay@cryptsoft.com)" + * The word 'cryptographic' can be left out if the rouines from the library + * being used are not cryptographic related :-). + * 4. If you include any Windows specific code (or a derivative thereof) from + * the apps directory (application code) you must include an acknowledgement: + * "This product includes software written by Tim Hudson (tjh@cryptsoft.com)" + * + * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND + * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY + * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF + * SUCH DAMAGE. + * + * The licence and distribution terms for any publically available version or + * derivative of this code cannot be changed. i.e. this code cannot simply be + * copied and put under another distribution licence + * [including the GNU Public Licence.] + */ + +#include <stdio.h> +#include "ssl_locl.h" +#include <openssl/buffer.h> +#include <openssl/rand.h> +#include <openssl/objects.h> +#include <openssl/evp.h> +#include <openssl/x509.h> +#include <openssl/md5.h> +#ifndef OPENSSL_NO_DH +#include <openssl/dh.h> +#endif + +static SSL_METHOD *dtls1_get_server_method(int ver); +static int dtls1_send_hello_verify_request(SSL *s); + +static SSL_METHOD *dtls1_get_server_method(int ver) + { + if (ver == DTLS1_VERSION) + return(DTLSv1_server_method()); + else + return(NULL); + } + +IMPLEMENT_dtls1_meth_func(DTLSv1_server_method, + dtls1_accept, + ssl_undefined_function, + dtls1_get_server_method) + +int dtls1_accept(SSL *s) + { + BUF_MEM *buf; + unsigned long l,Time=(unsigned long)time(NULL); + void (*cb)(const SSL *ssl,int type,int val)=NULL; + long num1; + int ret= -1; + int new_state,state,skip=0; + + RAND_add(&Time,sizeof(Time),0); + ERR_clear_error(); + clear_sys_error(); + + if (s->info_callback != NULL) + cb=s->info_callback; + else if (s->ctx->info_callback != NULL) + cb=s->ctx->info_callback; + + /* init things to blank */ + s->in_handshake++; + if (!SSL_in_init(s) || SSL_in_before(s)) SSL_clear(s); + + if (s->cert == NULL) + { + SSLerr(SSL_F_DTLS1_ACCEPT,SSL_R_NO_CERTIFICATE_SET); + return(-1); + } + + for (;;) + { + state=s->state; + + switch (s->state) + { + case SSL_ST_RENEGOTIATE: + s->new_session=1; + /* s->state=SSL_ST_ACCEPT; */ + + case SSL_ST_BEFORE: + case SSL_ST_ACCEPT: + case SSL_ST_BEFORE|SSL_ST_ACCEPT: + case SSL_ST_OK|SSL_ST_ACCEPT: + + s->server=1; + if (cb != NULL) cb(s,SSL_CB_HANDSHAKE_START,1); + + if ((s->version & 0xff00) != (DTLS1_VERSION & 0xff00)) + { + SSLerr(SSL_F_DTLS1_ACCEPT, ERR_R_INTERNAL_ERROR); + return -1; + } + s->type=SSL_ST_ACCEPT; + + if (s->init_buf == NULL) + { + if ((buf=BUF_MEM_new()) == NULL) + { + ret= -1; + goto end; + } + if (!BUF_MEM_grow(buf,SSL3_RT_MAX_PLAIN_LENGTH)) + { + ret= -1; + goto end; + } + s->init_buf=buf; + } + + if (!ssl3_setup_buffers(s)) + { + ret= -1; + goto end; + } + + s->init_num=0; + + if (s->state != SSL_ST_RENEGOTIATE) + { + /* Ok, we now need to push on a buffering BIO so that + * the output is sent in a way that TCP likes :-) + */ + if (!ssl_init_wbio_buffer(s,1)) { ret= -1; goto end; } + + ssl3_init_finished_mac(s); + s->state=SSL3_ST_SR_CLNT_HELLO_A; + s->ctx->stats.sess_accept++; + } + else + { + /* s->state == SSL_ST_RENEGOTIATE, + * we will just send a HelloRequest */ + s->ctx->stats.sess_accept_renegotiate++; + s->state=SSL3_ST_SW_HELLO_REQ_A; + } + + if ( (SSL_get_options(s) & SSL_OP_COOKIE_EXCHANGE)) + s->d1->send_cookie = 1; + else + s->d1->send_cookie = 0; + + break; + + case SSL3_ST_SW_HELLO_REQ_A: + case SSL3_ST_SW_HELLO_REQ_B: + + s->shutdown=0; + ret=dtls1_send_hello_request(s); + if (ret <= 0) goto end; + s->s3->tmp.next_state=SSL3_ST_SW_HELLO_REQ_C; + s->state=SSL3_ST_SW_FLUSH; + s->init_num=0; + + ssl3_init_finished_mac(s); + break; + + case SSL3_ST_SW_HELLO_REQ_C: + s->state=SSL_ST_OK; + break; + + case SSL3_ST_SR_CLNT_HELLO_A: + case SSL3_ST_SR_CLNT_HELLO_B: + case SSL3_ST_SR_CLNT_HELLO_C: + + s->shutdown=0; + ret=ssl3_get_client_hello(s); + if (ret <= 0) goto end; + s->new_session = 2; + + if ( s->d1->send_cookie) + s->state = DTLS1_ST_SW_HELLO_VERIFY_REQUEST_A; + else + s->state = SSL3_ST_SW_SRVR_HELLO_A; + + s->init_num=0; + break; + + case DTLS1_ST_SW_HELLO_VERIFY_REQUEST_A: + case DTLS1_ST_SW_HELLO_VERIFY_REQUEST_B: + + ret = dtls1_send_hello_verify_request(s); + if ( ret <= 0) goto end; + s->d1->send_cookie = 0; + s->state=SSL3_ST_SW_FLUSH; + s->s3->tmp.next_state=SSL3_ST_SR_CLNT_HELLO_A; + + /* HelloVerifyRequests resets Finished MAC */ + if (s->client_version != DTLS1_BAD_VER) + ssl3_init_finished_mac(s); + break; + + case SSL3_ST_SW_SRVR_HELLO_A: + case SSL3_ST_SW_SRVR_HELLO_B: + ret=dtls1_send_server_hello(s); + if (ret <= 0) goto end; + + if (s->hit) + s->state=SSL3_ST_SW_CHANGE_A; + else + s->state=SSL3_ST_SW_CERT_A; + s->init_num=0; + break; + + case SSL3_ST_SW_CERT_A: + case SSL3_ST_SW_CERT_B: + /* Check if it is anon DH */ + if (!(s->s3->tmp.new_cipher->algorithms & SSL_aNULL)) + { + ret=dtls1_send_server_certificate(s); + if (ret <= 0) goto end; + } + else + skip=1; + s->state=SSL3_ST_SW_KEY_EXCH_A; + s->init_num=0; + break; + + case SSL3_ST_SW_KEY_EXCH_A: + case SSL3_ST_SW_KEY_EXCH_B: + l=s->s3->tmp.new_cipher->algorithms; + + /* clear this, it may get reset by + * send_server_key_exchange */ + if ((s->options & SSL_OP_EPHEMERAL_RSA) +#ifndef OPENSSL_NO_KRB5 + && !(l & SSL_KRB5) +#endif /* OPENSSL_NO_KRB5 */ + ) + /* option SSL_OP_EPHEMERAL_RSA sends temporary RSA key + * even when forbidden by protocol specs + * (handshake may fail as clients are not required to + * be able to handle this) */ + s->s3->tmp.use_rsa_tmp=1; + else + s->s3->tmp.use_rsa_tmp=0; + + /* only send if a DH key exchange, fortezza or + * RSA but we have a sign only certificate */ + if (s->s3->tmp.use_rsa_tmp + || (l & (SSL_DH|SSL_kFZA)) + || ((l & SSL_kRSA) + && (s->cert->pkeys[SSL_PKEY_RSA_ENC].privatekey == NULL + || (SSL_C_IS_EXPORT(s->s3->tmp.new_cipher) + && EVP_PKEY_size(s->cert->pkeys[SSL_PKEY_RSA_ENC].privatekey)*8 > SSL_C_EXPORT_PKEYLENGTH(s->s3->tmp.new_cipher) + ) + ) + ) + ) + { + ret=dtls1_send_server_key_exchange(s); + if (ret <= 0) goto end; + } + else + skip=1; + + s->state=SSL3_ST_SW_CERT_REQ_A; + s->init_num=0; + break; + + case SSL3_ST_SW_CERT_REQ_A: + case SSL3_ST_SW_CERT_REQ_B: + if (/* don't request cert unless asked for it: */ + !(s->verify_mode & SSL_VERIFY_PEER) || + /* if SSL_VERIFY_CLIENT_ONCE is set, + * don't request cert during re-negotiation: */ + ((s->session->peer != NULL) && + (s->verify_mode & SSL_VERIFY_CLIENT_ONCE)) || + /* never request cert in anonymous ciphersuites + * (see section "Certificate request" in SSL 3 drafts + * and in RFC 2246): */ + ((s->s3->tmp.new_cipher->algorithms & SSL_aNULL) && + /* ... except when the application insists on verification + * (against the specs, but s3_clnt.c accepts this for SSL 3) */ + !(s->verify_mode & SSL_VERIFY_FAIL_IF_NO_PEER_CERT)) || + /* never request cert in Kerberos ciphersuites */ + (s->s3->tmp.new_cipher->algorithms & SSL_aKRB5)) + { + /* no cert request */ + skip=1; + s->s3->tmp.cert_request=0; + s->state=SSL3_ST_SW_SRVR_DONE_A; + } + else + { + s->s3->tmp.cert_request=1; + ret=dtls1_send_certificate_request(s); + if (ret <= 0) goto end; +#ifndef NETSCAPE_HANG_BUG + s->state=SSL3_ST_SW_SRVR_DONE_A; +#else + s->state=SSL3_ST_SW_FLUSH; + s->s3->tmp.next_state=SSL3_ST_SR_CERT_A; +#endif + s->init_num=0; + } + break; + + case SSL3_ST_SW_SRVR_DONE_A: + case SSL3_ST_SW_SRVR_DONE_B: + ret=dtls1_send_server_done(s); + if (ret <= 0) goto end; + s->s3->tmp.next_state=SSL3_ST_SR_CERT_A; + s->state=SSL3_ST_SW_FLUSH; + s->init_num=0; + break; + + case SSL3_ST_SW_FLUSH: + /* number of bytes to be flushed */ + num1=BIO_ctrl(s->wbio,BIO_CTRL_INFO,0,NULL); + if (num1 > 0) + { + s->rwstate=SSL_WRITING; + num1=BIO_flush(s->wbio); + if (num1 <= 0) { ret= -1; goto end; } + s->rwstate=SSL_NOTHING; + } + + s->state=s->s3->tmp.next_state; + break; + + case SSL3_ST_SR_CERT_A: + case SSL3_ST_SR_CERT_B: + /* Check for second client hello (MS SGC) */ + ret = ssl3_check_client_hello(s); + if (ret <= 0) + goto end; + if (ret == 2) + s->state = SSL3_ST_SR_CLNT_HELLO_C; + else { + /* could be sent for a DH cert, even if we + * have not asked for it :-) */ + ret=ssl3_get_client_certificate(s); + if (ret <= 0) goto end; + s->init_num=0; + s->state=SSL3_ST_SR_KEY_EXCH_A; + } + break; + + case SSL3_ST_SR_KEY_EXCH_A: + case SSL3_ST_SR_KEY_EXCH_B: + ret=ssl3_get_client_key_exchange(s); + if (ret <= 0) goto end; + s->state=SSL3_ST_SR_CERT_VRFY_A; + s->init_num=0; + + /* We need to get hashes here so if there is + * a client cert, it can be verified */ + s->method->ssl3_enc->cert_verify_mac(s, + &(s->s3->finish_dgst1), + &(s->s3->tmp.cert_verify_md[0])); + s->method->ssl3_enc->cert_verify_mac(s, + &(s->s3->finish_dgst2), + &(s->s3->tmp.cert_verify_md[MD5_DIGEST_LENGTH])); + + break; + + case SSL3_ST_SR_CERT_VRFY_A: + case SSL3_ST_SR_CERT_VRFY_B: + + /* we should decide if we expected this one */ + ret=ssl3_get_cert_verify(s); + if (ret <= 0) goto end; + + s->state=SSL3_ST_SR_FINISHED_A; + s->init_num=0; + break; + + case SSL3_ST_SR_FINISHED_A: + case SSL3_ST_SR_FINISHED_B: + ret=ssl3_get_finished(s,SSL3_ST_SR_FINISHED_A, + SSL3_ST_SR_FINISHED_B); + if (ret <= 0) goto end; + if (s->hit) + s->state=SSL_ST_OK; + else + s->state=SSL3_ST_SW_CHANGE_A; + s->init_num=0; + break; + + case SSL3_ST_SW_CHANGE_A: + case SSL3_ST_SW_CHANGE_B: + + s->session->cipher=s->s3->tmp.new_cipher; + if (!s->method->ssl3_enc->setup_key_block(s)) + { ret= -1; goto end; } + + ret=dtls1_send_change_cipher_spec(s, + SSL3_ST_SW_CHANGE_A,SSL3_ST_SW_CHANGE_B); + + if (ret <= 0) goto end; + s->state=SSL3_ST_SW_FINISHED_A; + s->init_num=0; + + if (!s->method->ssl3_enc->change_cipher_state(s, + SSL3_CHANGE_CIPHER_SERVER_WRITE)) + { + ret= -1; + goto end; + } + + dtls1_reset_seq_numbers(s, SSL3_CC_WRITE); + break; + + case SSL3_ST_SW_FINISHED_A: + case SSL3_ST_SW_FINISHED_B: + ret=dtls1_send_finished(s, + SSL3_ST_SW_FINISHED_A,SSL3_ST_SW_FINISHED_B, + s->method->ssl3_enc->server_finished_label, + s->method->ssl3_enc->server_finished_label_len); + if (ret <= 0) goto end; + s->state=SSL3_ST_SW_FLUSH; + if (s->hit) + s->s3->tmp.next_state=SSL3_ST_SR_FINISHED_A; + else + s->s3->tmp.next_state=SSL_ST_OK; + s->init_num=0; + break; + + case SSL_ST_OK: + /* clean a few things up */ + ssl3_cleanup_key_block(s); + +#if 0 + BUF_MEM_free(s->init_buf); + s->init_buf=NULL; +#endif + + /* remove buffering on output */ + ssl_free_wbio_buffer(s); + + s->init_num=0; + + if (s->new_session == 2) /* skipped if we just sent a HelloRequest */ + { + /* actually not necessarily a 'new' session unless + * SSL_OP_NO_SESSION_RESUMPTION_ON_RENEGOTIATION is set */ + + s->new_session=0; + + ssl_update_cache(s,SSL_SESS_CACHE_SERVER); + + s->ctx->stats.sess_accept_good++; + /* s->server=1; */ + s->handshake_func=dtls1_accept; + + if (cb != NULL) cb(s,SSL_CB_HANDSHAKE_DONE,1); + } + + ret = 1; + + /* done handshaking, next message is client hello */ + s->d1->handshake_read_seq = 0; + /* next message is server hello */ + s->d1->handshake_write_seq = 0; + goto end; + /* break; */ + + default: + SSLerr(SSL_F_DTLS1_ACCEPT,SSL_R_UNKNOWN_STATE); + ret= -1; + goto end; + /* break; */ + } + + if (!s->s3->tmp.reuse_message && !skip) + { + if (s->debug) + { + if ((ret=BIO_flush(s->wbio)) <= 0) + goto end; + } + + + if ((cb != NULL) && (s->state != state)) + { + new_state=s->state; + s->state=state; + cb(s,SSL_CB_ACCEPT_LOOP,1); + s->state=new_state; + } + } + skip=0; + } +end: + /* BIO_flush(s->wbio); */ + + s->in_handshake--; + if (cb != NULL) + cb(s,SSL_CB_ACCEPT_EXIT,ret); + return(ret); + } + +int dtls1_send_hello_request(SSL *s) + { + unsigned char *p; + + if (s->state == SSL3_ST_SW_HELLO_REQ_A) + { + p=(unsigned char *)s->init_buf->data; + p = dtls1_set_message_header(s, p, SSL3_MT_HELLO_REQUEST, 0, 0, 0); + + s->state=SSL3_ST_SW_HELLO_REQ_B; + /* number of bytes to write */ + s->init_num=DTLS1_HM_HEADER_LENGTH; + s->init_off=0; + + /* no need to buffer this message, since there are no retransmit + * requests for it */ + } + + /* SSL3_ST_SW_HELLO_REQ_B */ + return(dtls1_do_write(s,SSL3_RT_HANDSHAKE)); + } + +int dtls1_send_hello_verify_request(SSL *s) + { + unsigned int msg_len; + unsigned char *msg, *buf, *p; + + if (s->state == DTLS1_ST_SW_HELLO_VERIFY_REQUEST_A) + { + buf = (unsigned char *)s->init_buf->data; + + msg = p = &(buf[DTLS1_HM_HEADER_LENGTH]); + if (s->client_version == DTLS1_BAD_VER) + *(p++) = DTLS1_BAD_VER>>8, + *(p++) = DTLS1_BAD_VER&0xff; + else + *(p++) = s->version >> 8, + *(p++) = s->version & 0xFF; + + if (s->ctx->app_gen_cookie_cb != NULL && + s->ctx->app_gen_cookie_cb(s, s->d1->cookie, + &(s->d1->cookie_len)) == 0) + { + SSLerr(SSL_F_DTLS1_SEND_HELLO_VERIFY_REQUEST,ERR_R_INTERNAL_ERROR); + return 0; + } + /* else the cookie is assumed to have + * been initialized by the application */ + + *(p++) = (unsigned char) s->d1->cookie_len; + memcpy(p, s->d1->cookie, s->d1->cookie_len); + p += s->d1->cookie_len; + msg_len = p - msg; + + dtls1_set_message_header(s, buf, + DTLS1_MT_HELLO_VERIFY_REQUEST, msg_len, 0, msg_len); + + s->state=DTLS1_ST_SW_HELLO_VERIFY_REQUEST_B; + /* number of bytes to write */ + s->init_num=p-buf; + s->init_off=0; + + /* buffer the message to handle re-xmits */ + dtls1_buffer_message(s, 0); + } + + /* s->state = DTLS1_ST_SW_HELLO_VERIFY_REQUEST_B */ + return(dtls1_do_write(s,SSL3_RT_HANDSHAKE)); + } + +int dtls1_send_server_hello(SSL *s) + { + unsigned char *buf; + unsigned char *p,*d; + int i; + unsigned int sl; + unsigned long l,Time; + + if (s->state == SSL3_ST_SW_SRVR_HELLO_A) + { + buf=(unsigned char *)s->init_buf->data; + p=s->s3->server_random; + Time=(unsigned long)time(NULL); /* Time */ + l2n(Time,p); + RAND_pseudo_bytes(p,SSL3_RANDOM_SIZE-sizeof(Time)); + /* Do the message type and length last */ + d=p= &(buf[DTLS1_HM_HEADER_LENGTH]); + + if (s->client_version == DTLS1_BAD_VER) + *(p++)=DTLS1_BAD_VER>>8, + *(p++)=DTLS1_BAD_VER&0xff; + else + *(p++)=s->version>>8, + *(p++)=s->version&0xff; + + /* Random stuff */ + memcpy(p,s->s3->server_random,SSL3_RANDOM_SIZE); + p+=SSL3_RANDOM_SIZE; + + /* now in theory we have 3 options to sending back the + * session id. If it is a re-use, we send back the + * old session-id, if it is a new session, we send + * back the new session-id or we send back a 0 length + * session-id if we want it to be single use. + * Currently I will not implement the '0' length session-id + * 12-Jan-98 - I'll now support the '0' length stuff. + */ + if (!(s->ctx->session_cache_mode & SSL_SESS_CACHE_SERVER)) + s->session->session_id_length=0; + + sl=s->session->session_id_length; + if (sl > sizeof s->session->session_id) + { + SSLerr(SSL_F_DTLS1_SEND_SERVER_HELLO, ERR_R_INTERNAL_ERROR); + return -1; + } + *(p++)=sl; + memcpy(p,s->session->session_id,sl); + p+=sl; + + /* put the cipher */ + i=ssl3_put_cipher_by_char(s->s3->tmp.new_cipher,p); + p+=i; + + /* put the compression method */ +#ifdef OPENSSL_NO_COMP + *(p++)=0; +#else + if (s->s3->tmp.new_compression == NULL) + *(p++)=0; + else + *(p++)=s->s3->tmp.new_compression->id; +#endif + + /* do the header */ + l=(p-d); + d=buf; + + d = dtls1_set_message_header(s, d, SSL3_MT_SERVER_HELLO, l, 0, l); + + s->state=SSL3_ST_SW_SRVR_HELLO_B; + /* number of bytes to write */ + s->init_num=p-buf; + s->init_off=0; + + /* buffer the message to handle re-xmits */ + dtls1_buffer_message(s, 0); + } + + /* SSL3_ST_SW_SRVR_HELLO_B */ + return(dtls1_do_write(s,SSL3_RT_HANDSHAKE)); + } + +int dtls1_send_server_done(SSL *s) + { + unsigned char *p; + + if (s->state == SSL3_ST_SW_SRVR_DONE_A) + { + p=(unsigned char *)s->init_buf->data; + + /* do the header */ + p = dtls1_set_message_header(s, p, SSL3_MT_SERVER_DONE, 0, 0, 0); + + s->state=SSL3_ST_SW_SRVR_DONE_B; + /* number of bytes to write */ + s->init_num=DTLS1_HM_HEADER_LENGTH; + s->init_off=0; + + /* buffer the message to handle re-xmits */ + dtls1_buffer_message(s, 0); + } + + /* SSL3_ST_SW_SRVR_DONE_B */ + return(dtls1_do_write(s,SSL3_RT_HANDSHAKE)); + } + +int dtls1_send_server_key_exchange(SSL *s) + { +#ifndef OPENSSL_NO_RSA + unsigned char *q; + int j,num; + RSA *rsa; + unsigned char md_buf[MD5_DIGEST_LENGTH+SHA_DIGEST_LENGTH]; + unsigned int u; +#endif +#ifndef OPENSSL_NO_DH + DH *dh=NULL,*dhp; +#endif + EVP_PKEY *pkey; + unsigned char *p,*d; + int al,i; + unsigned long type; + int n; + CERT *cert; + BIGNUM *r[4]; + int nr[4],kn; + BUF_MEM *buf; + EVP_MD_CTX md_ctx; + + EVP_MD_CTX_init(&md_ctx); + if (s->state == SSL3_ST_SW_KEY_EXCH_A) + { + type=s->s3->tmp.new_cipher->algorithms & SSL_MKEY_MASK; + cert=s->cert; + + buf=s->init_buf; + + r[0]=r[1]=r[2]=r[3]=NULL; + n=0; +#ifndef OPENSSL_NO_RSA + if (type & SSL_kRSA) + { + rsa=cert->rsa_tmp; + if ((rsa == NULL) && (s->cert->rsa_tmp_cb != NULL)) + { + rsa=s->cert->rsa_tmp_cb(s, + SSL_C_IS_EXPORT(s->s3->tmp.new_cipher), + SSL_C_EXPORT_PKEYLENGTH(s->s3->tmp.new_cipher)); + if(rsa == NULL) + { + al=SSL_AD_HANDSHAKE_FAILURE; + SSLerr(SSL_F_DTLS1_SEND_SERVER_KEY_EXCHANGE,SSL_R_ERROR_GENERATING_TMP_RSA_KEY); + goto f_err; + } + RSA_up_ref(rsa); + cert->rsa_tmp=rsa; + } + if (rsa == NULL) + { + al=SSL_AD_HANDSHAKE_FAILURE; + SSLerr(SSL_F_DTLS1_SEND_SERVER_KEY_EXCHANGE,SSL_R_MISSING_TMP_RSA_KEY); + goto f_err; + } + r[0]=rsa->n; + r[1]=rsa->e; + s->s3->tmp.use_rsa_tmp=1; + } + else +#endif +#ifndef OPENSSL_NO_DH + if (type & SSL_kEDH) + { + dhp=cert->dh_tmp; + if ((dhp == NULL) && (s->cert->dh_tmp_cb != NULL)) + dhp=s->cert->dh_tmp_cb(s, + SSL_C_IS_EXPORT(s->s3->tmp.new_cipher), + SSL_C_EXPORT_PKEYLENGTH(s->s3->tmp.new_cipher)); + if (dhp == NULL) + { + al=SSL_AD_HANDSHAKE_FAILURE; + SSLerr(SSL_F_DTLS1_SEND_SERVER_KEY_EXCHANGE,SSL_R_MISSING_TMP_DH_KEY); + goto f_err; + } + + if (s->s3->tmp.dh != NULL) + { + DH_free(dh); + SSLerr(SSL_F_DTLS1_SEND_SERVER_KEY_EXCHANGE, ERR_R_INTERNAL_ERROR); + goto err; + } + + if ((dh=DHparams_dup(dhp)) == NULL) + { + SSLerr(SSL_F_DTLS1_SEND_SERVER_KEY_EXCHANGE,ERR_R_DH_LIB); + goto err; + } + + s->s3->tmp.dh=dh; + if ((dhp->pub_key == NULL || + dhp->priv_key == NULL || + (s->options & SSL_OP_SINGLE_DH_USE))) + { + if(!DH_generate_key(dh)) + { + SSLerr(SSL_F_DTLS1_SEND_SERVER_KEY_EXCHANGE, + ERR_R_DH_LIB); + goto err; + } + } + else + { + dh->pub_key=BN_dup(dhp->pub_key); + dh->priv_key=BN_dup(dhp->priv_key); + if ((dh->pub_key == NULL) || + (dh->priv_key == NULL)) + { + SSLerr(SSL_F_DTLS1_SEND_SERVER_KEY_EXCHANGE,ERR_R_DH_LIB); + goto err; + } + } + r[0]=dh->p; + r[1]=dh->g; + r[2]=dh->pub_key; + } + else +#endif + { + al=SSL_AD_HANDSHAKE_FAILURE; + SSLerr(SSL_F_DTLS1_SEND_SERVER_KEY_EXCHANGE,SSL_R_UNKNOWN_KEY_EXCHANGE_TYPE); + goto f_err; + } + for (i=0; r[i] != NULL; i++) + { + nr[i]=BN_num_bytes(r[i]); + n+=2+nr[i]; + } + + if (!(s->s3->tmp.new_cipher->algorithms & SSL_aNULL)) + { + if ((pkey=ssl_get_sign_pkey(s,s->s3->tmp.new_cipher)) + == NULL) + { + al=SSL_AD_DECODE_ERROR; + goto f_err; + } + kn=EVP_PKEY_size(pkey); + } + else + { + pkey=NULL; + kn=0; + } + + if (!BUF_MEM_grow_clean(buf,n+DTLS1_HM_HEADER_LENGTH+kn)) + { + SSLerr(SSL_F_DTLS1_SEND_SERVER_KEY_EXCHANGE,ERR_LIB_BUF); + goto err; + } + d=(unsigned char *)s->init_buf->data; + p= &(d[DTLS1_HM_HEADER_LENGTH]); + + for (i=0; r[i] != NULL; i++) + { + s2n(nr[i],p); + BN_bn2bin(r[i],p); + p+=nr[i]; + } + + /* not anonymous */ + if (pkey != NULL) + { + /* n is the length of the params, they start at + * &(d[DTLS1_HM_HEADER_LENGTH]) and p points to the space + * at the end. */ +#ifndef OPENSSL_NO_RSA + if (pkey->type == EVP_PKEY_RSA) + { + q=md_buf; + j=0; + for (num=2; num > 0; num--) + { + EVP_DigestInit_ex(&md_ctx,(num == 2) + ?s->ctx->md5:s->ctx->sha1, NULL); + EVP_DigestUpdate(&md_ctx,&(s->s3->client_random[0]),SSL3_RANDOM_SIZE); + EVP_DigestUpdate(&md_ctx,&(s->s3->server_random[0]),SSL3_RANDOM_SIZE); + EVP_DigestUpdate(&md_ctx,&(d[DTLS1_HM_HEADER_LENGTH]),n); + EVP_DigestFinal_ex(&md_ctx,q, + (unsigned int *)&i); + q+=i; + j+=i; + } + if (RSA_sign(NID_md5_sha1, md_buf, j, + &(p[2]), &u, pkey->pkey.rsa) <= 0) + { + SSLerr(SSL_F_DTLS1_SEND_SERVER_KEY_EXCHANGE,ERR_LIB_RSA); + goto err; + } + s2n(u,p); + n+=u+2; + } + else +#endif +#if !defined(OPENSSL_NO_DSA) + if (pkey->type == EVP_PKEY_DSA) + { + /* lets do DSS */ + EVP_SignInit_ex(&md_ctx,EVP_dss1(), NULL); + EVP_SignUpdate(&md_ctx,&(s->s3->client_random[0]),SSL3_RANDOM_SIZE); + EVP_SignUpdate(&md_ctx,&(s->s3->server_random[0]),SSL3_RANDOM_SIZE); + EVP_SignUpdate(&md_ctx,&(d[DTLS1_HM_HEADER_LENGTH]),n); + if (!EVP_SignFinal(&md_ctx,&(p[2]), + (unsigned int *)&i,pkey)) + { + SSLerr(SSL_F_DTLS1_SEND_SERVER_KEY_EXCHANGE,ERR_LIB_DSA); + goto err; + } + s2n(i,p); + n+=i+2; + } + else +#endif + { + /* Is this error check actually needed? */ + al=SSL_AD_HANDSHAKE_FAILURE; + SSLerr(SSL_F_DTLS1_SEND_SERVER_KEY_EXCHANGE,SSL_R_UNKNOWN_PKEY_TYPE); + goto f_err; + } + } + + d = dtls1_set_message_header(s, d, + SSL3_MT_SERVER_KEY_EXCHANGE, n, 0, n); + + /* we should now have things packed up, so lets send + * it off */ + s->init_num=n+DTLS1_HM_HEADER_LENGTH; + s->init_off=0; + + /* buffer the message to handle re-xmits */ + dtls1_buffer_message(s, 0); + } + + s->state = SSL3_ST_SW_KEY_EXCH_B; + EVP_MD_CTX_cleanup(&md_ctx); + return(dtls1_do_write(s,SSL3_RT_HANDSHAKE)); +f_err: + ssl3_send_alert(s,SSL3_AL_FATAL,al); +err: + EVP_MD_CTX_cleanup(&md_ctx); + return(-1); + } + +int dtls1_send_certificate_request(SSL *s) + { + unsigned char *p,*d; + int i,j,nl,off,n; + STACK_OF(X509_NAME) *sk=NULL; + X509_NAME *name; + BUF_MEM *buf; + unsigned int msg_len; + + if (s->state == SSL3_ST_SW_CERT_REQ_A) + { + buf=s->init_buf; + + d=p=(unsigned char *)&(buf->data[DTLS1_HM_HEADER_LENGTH]); + + /* get the list of acceptable cert types */ + p++; + n=ssl3_get_req_cert_type(s,p); + d[0]=n; + p+=n; + n++; + + off=n; + p+=2; + n+=2; + + sk=SSL_get_client_CA_list(s); + nl=0; + if (sk != NULL) + { + for (i=0; i<sk_X509_NAME_num(sk); i++) + { + name=sk_X509_NAME_value(sk,i); + j=i2d_X509_NAME(name,NULL); + if (!BUF_MEM_grow_clean(buf,DTLS1_HM_HEADER_LENGTH+n+j+2)) + { + SSLerr(SSL_F_DTLS1_SEND_CERTIFICATE_REQUEST,ERR_R_BUF_LIB); + goto err; + } + p=(unsigned char *)&(buf->data[DTLS1_HM_HEADER_LENGTH+n]); + if (!(s->options & SSL_OP_NETSCAPE_CA_DN_BUG)) + { + s2n(j,p); + i2d_X509_NAME(name,&p); + n+=2+j; + nl+=2+j; + } + else + { + d=p; + i2d_X509_NAME(name,&p); + j-=2; s2n(j,d); j+=2; + n+=j; + nl+=j; + } + } + } + /* else no CA names */ + p=(unsigned char *)&(buf->data[DTLS1_HM_HEADER_LENGTH+off]); + s2n(nl,p); + + d=(unsigned char *)buf->data; + *(d++)=SSL3_MT_CERTIFICATE_REQUEST; + l2n3(n,d); + s2n(s->d1->handshake_write_seq,d); + s->d1->handshake_write_seq++; + + /* we should now have things packed up, so lets send + * it off */ + + s->init_num=n+DTLS1_HM_HEADER_LENGTH; + s->init_off=0; +#ifdef NETSCAPE_HANG_BUG +/* XXX: what to do about this? */ + p=(unsigned char *)s->init_buf->data + s->init_num; + + /* do the header */ + *(p++)=SSL3_MT_SERVER_DONE; + *(p++)=0; + *(p++)=0; + *(p++)=0; + s->init_num += 4; +#endif + + /* XDTLS: set message header ? */ + msg_len = s->init_num - DTLS1_HM_HEADER_LENGTH; + dtls1_set_message_header(s, (void *)s->init_buf->data, + SSL3_MT_CERTIFICATE_REQUEST, msg_len, 0, msg_len); + + /* buffer the message to handle re-xmits */ + dtls1_buffer_message(s, 0); + + s->state = SSL3_ST_SW_CERT_REQ_B; + } + + /* SSL3_ST_SW_CERT_REQ_B */ + return(dtls1_do_write(s,SSL3_RT_HANDSHAKE)); +err: + return(-1); + } + +int dtls1_send_server_certificate(SSL *s) + { + unsigned long l; + X509 *x; + + if (s->state == SSL3_ST_SW_CERT_A) + { + x=ssl_get_server_send_cert(s); + if (x == NULL && + /* VRS: allow null cert if auth == KRB5 */ + (s->s3->tmp.new_cipher->algorithms + & (SSL_MKEY_MASK|SSL_AUTH_MASK)) + != (SSL_aKRB5|SSL_kKRB5)) + { + SSLerr(SSL_F_DTLS1_SEND_SERVER_CERTIFICATE,ERR_R_INTERNAL_ERROR); + return(0); + } + + l=dtls1_output_cert_chain(s,x); + s->state=SSL3_ST_SW_CERT_B; + s->init_num=(int)l; + s->init_off=0; + + /* buffer the message to handle re-xmits */ + dtls1_buffer_message(s, 0); + } + + /* SSL3_ST_SW_CERT_B */ + return(dtls1_do_write(s,SSL3_RT_HANDSHAKE)); + } |