diff options
Diffstat (limited to 'xorg-server/dix/BuiltInAtoms')
| -rw-r--r-- | xorg-server/dix/BuiltInAtoms | 329 |
1 files changed, 329 insertions, 0 deletions
diff --git a/xorg-server/dix/BuiltInAtoms b/xorg-server/dix/BuiltInAtoms new file mode 100644 index 000000000..910c62706 --- /dev/null +++ b/xorg-server/dix/BuiltInAtoms @@ -0,0 +1,329 @@ +File: .../x11/server/dix/BuiltInAtoms + +This file is of a fixed format and is used to generate both the file +include/XAtom.h and dix/initatoms.c. Neither of those files should be +edited directly. Changing the atoms in this file, or even the order in +which they occur, is equivalent to forcing a new (minor) version number +on the server. Take care. + +The format of the file is that each built in atom starts in column 1 +with no text, other than spaces and tabs, on that line other than a +mandatory trailing "@" at the end of the line. For each atom (Foo) +below the defines will be of the form + #define XA_Foo <n> +and the string value of the atom will be "Foo". + +The comment lines in this file are not guaranteed to be accurate. To see the +current truth, look at the Xlib documentation as well as the protocol spec. + +Atoms occur in five distinct name spaces within the protocol. Any particular +atom may or may not have some client interpretation within each of the name +spaces. For each of the built in atoms, the intended semantics and the space +within which it is defined is indicated. + +Those name spaces are + Property names + Property types + Selections + Font properties + Type of a ClientMessage event (none built into server) + +For the font properties mentioned here, see the spec for more information. + + -- Selections -- + +PRIMARY @ + Selection. +SECONDARY @ + Selection. + + -- Property types and names -- + +ARC @ + Property type: + x, y: INT16 + width, height: CARD16, + angle1, angle2: INT16 +ATOM @ + Property type: + atom: ATOM +BITMAP @ + Property type: + bitmap: PIXMAP + This is asserted to be of depth 1. +CARDINAL @ + Property type: + card: CARD32 or CARD16 or CARD8 + the datum size is dependent on the property format +COLORMAP @ + Property type: + colormap: COLORMAP +CURSOR @ + Property type: + cursor: CURSOR +CUT_BUFFER0 @ +CUT_BUFFER1 @ +CUT_BUFFER2 @ +CUT_BUFFER3 @ +CUT_BUFFER4 @ +CUT_BUFFER5 @ +CUT_BUFFER6 @ +CUT_BUFFER7 @ + Property name: (type: STRING) + Used to implement cut buffer ring, in particular Andrew uses + this mechanism. Anyone else using this sort of IPC mechanism + should use these properties. + + Data is normally fetched and stored out of CUT_BUFFER0; the + RotateProperties request is used to rotate these buffers. +DRAWABLE @ + Property type: + drawable: DRAWABLE +FONT @ + Property type: + font: FONT +INTEGER @ + Property type: + card: INT32 or INT16 or INT8 + the datum size is dependent on the property format +PIXMAP @ + Property type: + pixmap: PIXMAP +POINT @ + Property type: + x, y: INT16 +RECTANGLE @ + Property type: + x, y: INT16 + width, height: CARD16 +RESOURCE_MANAGER @ + Property name: (type: STRING) + Contents of the user's resource manager data base. +RGB_COLOR_MAP @ + Property type: + colormap: COLORMAP + red-max: CARD32 + red-mult: CARD32 + green-max: CARD32 + green-mult: CARD32 + blue-max: CARD32 + blue-mult: CARD32 + base-pixel: CARD32 + + The fields `red_max', `green_max', and `blue_max' give the maximum + red, green, and blue values, respectively. Each color + coefficient ranges from 0 to its max, inclusive. For example, + a common colormap allocation is 3/3/2: 3 planes for red, 3 + planes for green, and 2 planes for blue. Such a colormap would + have red_max == 7, green_max = 7, and blue_max = 3. An alternate + allocation that uses only 216 colors is red_max = 5, green_max = + 5, and blue_max = 5. + + The fields `red_mult', `green_mult', and `blue_mult' give the + scale factors used to compose a full pixel value. (See next + paragraph.) For a 3/3/2 allocation red_mult might be 32, + green_mult might be 4, and blue_mult might be 1. For a + 6-colors-each allocation, red_mult might be 36, green_mult might + be 6, and blue_mult might be 1. + + The field `base_pixel' gives the base pixel value used to + compose a full pixel value. Normally base_pixel is obtained + from a call to XAllocColorPlanes(). Given integer red, green, + and blue coefficients in their appropriate ranges, one can + compute a corresponding pixel value with the expression: + + r * red_mult + g * green_mult + b * blue_mult + base_pixel + + For gray-scale colormaps, only the colormap, red_max, red_mult, + and base_pixel fields are defined; the other fields are + ignored. To compute a gray-scale pixel value, use: + + gray * red_mult + base_pixel + + This is provided to allow applications to share color maps. + +RGB_BEST_MAP @ +RGB_BLUE_MAP @ +RGB_DEFAULT_MAP @ +RGB_GRAY_MAP @ +RGB_GREEN_MAP @ +RGB_RED_MAP @ + Property name: (type: RGB_COLOR_MAP) + The needs of most applications can be met with five colormaps. + Polite applications may need only a small RGB space, and can + use a portion of the default color map. Applications doing + high-quality RGB rendering will need an entire colormap, + filled with as large an RGB space as possible, e.g. 332. For + color separations, an application may need maximum device + resolution for each of red, green, and blue, even if this + requires three renderings with three colormaps. + + Each of the above five names would be used for sharing color + maps. +STRING @ + Property type: + sequence of Bytes +VISUALID @ + Property type: + visual: VISUALID +WINDOW @ + Property type: + window: WINDOW +WM_COMMAND @ + Property name: (type: STRING) + Command line arguments used to invoke this application. The + arguments are delimited by null characters (ASCII 0). +WM_HINTS @ + Property type: + flags: CARD32 + input: BOOL32 + initial-state: CARD32 + icon-pixmap: PIXMAP + icon-window: WINDOW + icon_mask: BITMAP + icon-x, icon-y: INT32 + flags contains the following bits + 0x00000001 input hint + 0x00000002 state hint + 0x00000004 icon pixmap hint + 0x00000008 icon window hint + 0x00000010 icon position hint + values for initial-state + 0 unspecified -> application does not + care and WM should pick one. + 1 normal + 2 zoomed + 3 iconic + 4 inactive -> application believes + itself to be seldomly used. WM may wish to + place it on an inactive menu. + This type is potentially extensible. The order is critical; + append to the end only. + Property name: (type: WM_HINTS) + Additional hints set by the client for use by the window + manager. +WM_CLIENT_MACHINE @ + Property name: (type: STRING) + used to communicate with the window manager. The host name + of the machine the client is running on may be set here. +WM_ICON_NAME @ + Property name: (type: STRING) + what the application would like the label to be for + the iconic form of the window. +WM_ICON_SIZE @ + Property type: + minWidth, min-height: CARD32 + maxWidth, max-height: CARD32 + widthInc, height-inc: CARD32 + Property name: (type: ICON_SIZE) + The window manager may set this property on the root window + to specify the icon sizes it allows. +WM_NAME @ + Property name: (type: STRING) + used to communicate with the window manager. This is + what the application would like the label for the window. +WM_NORMAL_HINTS @ + Property name: (type: SIZE_HINTS) + used to communicate with the window manager. This is size + hints for a window in its "normal" state. +WM_SIZE_HINTS @ + Property type: + flags: CARD32 + x, y: INT32 + width, height: CARD32 + min-width, min-height: CARD32 + max-width, max-height: CARD32 + width-inc, height-inc: CARD32 + min-aspect-x, min-aspect-y: CARD32 + max-aspect-x, max-aspect-y: CARD32 + flags contains the following bits + 0x00000001 user specified x and y + 0x00000002 user specified width and height + 0x00000004 program specified position + 0x00000008 program specified size + 0x00000010 program specified minimum size + 0x00000020 program specified maximum size + 0x00000040 program specified resize increment + 0x00000080 program specified aspect ratio + This type is potentially extensible. The order is critical; + append to the end only. +WM_ZOOM_HINTS @ + Property name: (type: SIZE_HINTS) + used to communicate with the window manager. This is size + hints for a window in its "zoomed" state. + + -- Font properties -- + +MIN_SPACE @ + Font property: CARD32 +NORM_SPACE @ + Font property: CARD32 +MAX_SPACE @ + Font property: CARD32 +END_SPACE @ + Font property: CARD32 +SUPERSCRIPT_X @ + Font property: INT32 +SUPERSCRIPT_Y @ + Font property: INT32 +SUBSCRIPT_X @ + Font property: INT32 +SUBSCRIPT_Y @ + Font property: INT32 +UNDERLINE_POSITION @ + Font property: INT32 +UNDERLINE_THICKNESS @ + Font property: CARD32 +STRIKEOUT_ASCENT @ + Font property: INT32 +STRIKEOUT_DESCENT @ + Font property: INT32 +ITALIC_ANGLE @ + Font property: INT32 +X_HEIGHT @ + Font property: INT32 +QUAD_WIDTH @ + Font property: INT32 +WEIGHT @ + Font property: CARD32 +POINT_SIZE @ + Font property: CARD32 +RESOLUTION @ + Font property: CARD32 + +The following optional properties on fonts have values that are atoms. The +atom print name is the useful information. + +COPYRIGHT @ + of the font distribution +NOTICE @ + trademark/copyright of the character shapes +FONT_NAME @ + name of this particular instance of a font +FAMILY_NAME @ + name of the 'font family' to which it belongs +FULL_NAME @ + full text name of the font + +The following aren't in order but putting them at the end avoids encoding +changes. + +CAP_HEIGHT @ + Font property: CARD32 + + +WM_CLASS @ + Property name: (type: STRING) + Used (possibly by some window managers; definitely by + session managers) to look up resources in the resource + data base on behalf of the client who set this property. + There are 2 elements: + {char *resource_name; char *resource_class;} + delimited by a null character (ascii 0) + +WM_TRANSIENT_FOR @ + Property name: (type: WINDOW) + Used by transient top-level windows, such as dialog + boxes, to point to their logical "parents". The window + manager can then take down the dialog boxes when the + "parent" gets iconified, for instance. |