5 files changed, 34 insertions, 1399 deletions
diff --git a/xorg-server/hw/dmx/doc/Makefile.am b/xorg-server/hw/dmx/doc/Makefile.am
index d3acf23b7..0713884cd 100644
--- a/xorg-server/hw/dmx/doc/Makefile.am
+++ b/xorg-server/hw/dmx/doc/Makefile.am
@@ -1,277 +1,34 @@
-#  Copyright 2005 Red Hat, Inc.
-#
-#  Permission to use, copy, modify, distribute, and sell this software
-#  and its documentation for any purpose is hereby granted without
-#  fee, provided that the above copyright notice appear in all copies
-#  and that both that copyright notice and this permission notice
-#  appear in supporting documentation, and that the name of Red Hat
-#  not be used in advertising or publicity pertaining to distribution
-#  of the software without specific, written prior permission.  Red
-#  Hat makes no representations about the suitability of this software
-#  for any purpose.  It is provided "as is" without express or implied
-#  warranty.
-#
-#  RED HAT DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE,
-#  INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN
-#  NO EVENT SHALL RED HAT BE LIABLE FOR ANY SPECIAL, INDIRECT OR
-#  CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS
-#  OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT,
-#  NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN
-#  CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
-
-doc_sources = dmx.xml scaled.xml
-
-# Developer's documentation is not installed
-if ENABLE_DEVEL_DOCS
-include $(top_srcdir)/doc/xml/xmlrules-noinst.in
-endif ENABLE_DEVEL_DOCS
-
-DOXYGEN_HEAD=\
-	html/annotated.html
-
-DOXYGEN_REST= \
-	html/ChkNotMaskEv_8c.html \
-	html/ChkNotMaskEv_8h.html \
-	html/ChkNotMaskEv_8h_source.html \
-	html/classes.html \
-	html/dmx_8h.html \
-	html/dmx_8h_source.html \
-	html/dmxarg_8c.html \
-	html/dmxarg_8h.html \
-	html/dmxarg_8h_source.html \
-	html/dmxbackend_8c.html \
-	html/dmxbackend_8h.html \
-	html/dmxbackend_8h_source.html \
-	html/dmxcb_8c.html \
-	html/dmxcb_8h.html \
-	html/dmxcb_8h_source.html \
-	html/dmxclient_8h.html \
-	html/dmxclient_8h_source.html \
-	html/dmxcmap_8c.html \
-	html/dmxcmap_8h.html \
-	html/dmxcmap_8h_source.html \
-	html/dmxcommon_8c.html \
-	html/dmxcommon_8h.html \
-	html/dmxcommon_8h_source.html \
-	html/dmxcompat_8c.html \
-	html/dmxcompat_8h.html \
-	html/dmxcompat_8h_source.html \
-	html/dmxconfig_8c.html \
-	html/dmxconfig_8h.html \
-	html/dmxconfig_8h_source.html \
-	html/dmxconsole_8c.html \
-	html/dmxconsole_8h.html \
-	html/dmxconsole_8h_source.html \
-	html/dmxcursor_8c.html \
-	html/dmxcursor_8h.html \
-	html/dmxcursor_8h_source.html \
-	html/dmxdetach_8c.html \
-	html/dmxdpms_8c.html \
-	html/dmxdpms_8h.html \
-	html/dmxdpms_8h_source.html \
-	html/dmxdummy_8c.html \
-	html/dmxdummy_8h.html \
-	html/dmxdummy_8h_source.html \
-	html/dmxevents_8c.html \
-	html/dmxevents_8h.html \
-	html/dmxevents_8h_source.html \
-	html/dmxextension_8c.html \
-	html/dmxextension_8h.html \
-	html/dmxextension_8h_source.html \
-	html/dmxfont_8c.html \
-	html/dmxfont_8h.html \
-	html/dmxfont_8h_source.html \
-	html/dmxgc_8c.html \
-	html/dmxgc_8h.html \
-	html/dmxgc_8h_source.html \
-	html/dmxgcops_8c.html \
-	html/dmxgcops_8h.html \
-	html/dmxgcops_8h_source.html \
-	html/dmx__glxvisuals_8h_source.html \
-	html/dmxinit_8c.html \
-	html/dmxinit_8h.html \
-	html/dmxinit_8h_source.html \
-	html/dmxinput_8c.html \
-	html/dmxinput_8h.html \
-	html/dmxinput_8h_source.html \
-	html/dmxinputinit_8c.html \
-	html/dmxinputinit_8h.html \
-	html/dmxinputinit_8h_source.html \
-	html/dmxlog_8c.html \
-	html/dmxlog_8h.html \
-	html/dmxlog_8h_source.html \
-	html/dmxmap_8c.html \
-	html/dmxmap_8h.html \
-	html/dmxmap_8h_source.html \
-	html/dmxmotion_8c.html \
-	html/dmxmotion_8h.html \
-	html/dmxmotion_8h_source.html \
-	html/dmxparse_8c.html \
-	html/dmxparse_8h.html \
-	html/dmxparse_8h_source.html \
-	html/dmxpict_8c.html \
-	html/dmxpict_8h.html \
-	html/dmxpict_8h_source.html \
-	html/dmxpixmap_8c.html \
-	html/dmxpixmap_8h.html \
-	html/dmxpixmap_8h_source.html \
-	html/dmxprint_8c.html \
-	html/dmxprint_8h.html \
-	html/dmxprint_8h_source.html \
-	html/dmxprop_8c.html \
-	html/dmxprop_8h.html \
-	html/dmxprop_8h_source.html \
-	html/dmxscrinit_8c.html \
-	html/dmxscrinit_8h.html \
-	html/dmxscrinit_8h_source.html \
-	html/dmxshadow_8c.html \
-	html/dmxshadow_8h.html \
-	html/dmxshadow_8h_source.html \
-	html/dmxsigio_8c.html \
-	html/dmxsigio_8h.html \
-	html/dmxsigio_8h_source.html \
-	html/dmxstat_8c.html \
-	html/dmxstat_8h.html \
-	html/dmxstat_8h_source.html \
-	html/dmxsync_8c.html \
-	html/dmxsync_8h.html \
-	html/dmxsync_8h_source.html \
-	html/dmxvisual_8c.html \
-	html/dmxvisual_8h.html \
-	html/dmxvisual_8h_source.html \
-	html/dmxwindow_8c.html \
-	html/dmxwindow_8h.html \
-	html/dmxwindow_8h_source.html \
-	html/dmxxinput_8c.html \
-	html/doxygen.css \
-	html/doxygen.png \
-	html/files.html \
-	html/ftv2blank.png \
-	html/ftv2doc.png \
-	html/ftv2folderclosed.png \
-	html/ftv2folderopen.png \
-	html/ftv2lastnode.png \
-	html/ftv2link.png \
-	html/ftv2mlastnode.png \
-	html/ftv2mnode.png \
-	html/ftv2node.png \
-	html/ftv2plastnode.png \
-	html/ftv2pnode.png \
-	html/ftv2vertline.png \
-	html/functions.html \
-	html/functions_vars.html \
-	html/globals_defs.html \
-	html/globals_enum.html \
-	html/globals_eval.html \
-	html/globals_func.html \
-	html/globals.html \
-	html/globals_type.html \
-	html/globals_vars.html \
-	html/index.html \
-	html/lnx-keyboard_8c.html \
-	html/lnx-keyboard_8h.html \
-	html/lnx-keyboard_8h_source.html \
-	html/lnx-ms_8c.html \
-	html/lnx-ms_8h.html \
-	html/lnx-ms_8h_source.html \
-	html/lnx-ps2_8c.html \
-	html/lnx-ps2_8h.html \
-	html/lnx-ps2_8h_source.html \
-	html/main.html \
-	html/struct__dmxArg.html \
-	html/struct__dmxColormapPriv.html \
-	html/structDMXConfigCmdStruct.html \
-	html/struct__DMXConfigComment.html \
-	html/struct__DMXConfigDisplay.html \
-	html/struct__DMXConfigEntry.html \
-	html/struct__DMXConfigFullDim.html \
-	html/structDMXConfigListStruct.html \
-	html/struct__DMXConfigNumber.html \
-	html/struct__DMXConfigOption.html \
-	html/struct__DMXConfigPair.html \
-	html/struct__DMXConfigParam.html \
-	html/struct__DMXConfigPartDim.html \
-	html/struct__DMXConfigString.html \
-	html/struct__DMXConfigSub.html \
-	html/struct__DMXConfigToken.html \
-	html/struct__DMXConfigVirtual.html \
-	html/struct__DMXConfigWall.html \
-	html/struct__dmxCursorPriv.html \
-	html/structDMXDesktopAttributesRec.html \
-	html/struct__DMXEventMap.html \
-	html/struct__dmxFontPriv.html \
-	html/struct__dmxGCPriv.html \
-	html/structdmxGlxVisualPrivate.html \
-	html/struct__dmxGlyphPriv.html \
-	html/structDMXInputAttributesRec.html \
-	html/struct__DMXInputInfo.html \
-	html/struct__DMXLocalInitInfo.html \
-	html/struct__DMXLocalInputInfo.html \
-	html/struct__dmxPictPriv.html \
-	html/struct__dmxPixPriv.html \
-	html/structDMXScreenAttributesRec.html \
-	html/struct__DMXScreenInfo.html \
-	html/struct__DMXStatAvg.html \
-	html/struct__DMXStatInfo.html \
-	html/structDMXWindowAttributesRec.html \
-	html/struct__dmxWinPriv.html \
-	html/struct__myPrivate.html \
-	html/tree.html \
-	html/usb-common_8c.html \
-	html/usb-common_8h.html \
-	html/usb-common_8h_source.html \
-	html/usb-keyboard_8c.html \
-	html/usb-keyboard_8h.html \
-	html/usb-keyboard_8h_source.html \
-	html/usb-mouse_8c.html \
-	html/usb-mouse_8h.html \
-	html/usb-mouse_8h_source.html \
-	html/usb-other_8c.html \
-	html/usb-other_8h.html \
-	html/usb-other_8h_source.html \
-	html/usb-private_8h.html \
-	html/usb-private_8h_source.html
-
-DOXYGEN_FILES=$(DOXYGEN_HEAD) $(DOXYGEN_REST)
-
-EXTRA_DIST = \
-	DMXSpec.txt \
-	DMXSpec-v1.txt \
-	doxygen.conf \
-	doxygen.css \
-	doxygen.foot \
-	doxygen.head \
-	$(DOXYGEN_FILES)
-
-if ENABLE_DEVEL_DOCS
-if HAVE_DOXYGEN
-
-DOXYGEN_SRC=doxygen.head doxygen.foot doxygen.css doxygen.conf
-
-all-local: $(DOXYGEN_FILES)
-
-dist-local: $(DOXYGEN_FILES)
-
-$(DOXYGEN_HEAD): $(DOXYGEN_SRC)
-	$(DOXYGEN) doxygen.conf
-
-$(DOXYGEN_REST): $(DOXYGEN_HEAD)
-
-maintainer-clean-local:
-	rm -rf html/
-
-distclean-local:
-	rm -rf html/
-
-endif HAVE_DOXYGEN
-endif ENABLE_DEVEL_DOCS
-
-$(builddir)/doxygen.head:
-	$(LN_S) $(srcdir)/doxygen.head $@
-
-$(builddir)/doxygen.foot:
-	$(LN_S) $(srcdir)/doxygen.foot $@
-
-$(builddir)doxygen.css:
-	$(LN_S) $(srcdir)/doxygen.css $@
-
+#  Copyright 2005 Red Hat, Inc.
+#
+#  Permission to use, copy, modify, distribute, and sell this software
+#  and its documentation for any purpose is hereby granted without
+#  fee, provided that the above copyright notice appear in all copies
+#  and that both that copyright notice and this permission notice
+#  appear in supporting documentation, and that the name of Red Hat
+#  not be used in advertising or publicity pertaining to distribution
+#  of the software without specific, written prior permission.  Red
+#  Hat makes no representations about the suitability of this software
+#  for any purpose.  It is provided "as is" without express or implied
+#  warranty.
+#
+#  RED HAT DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE,
+#  INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN
+#  NO EVENT SHALL RED HAT BE LIABLE FOR ANY SPECIAL, INDIRECT OR
+#  CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS
+#  OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT,
+#  NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN
+#  CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+
+if ENABLE_DEVEL_DOCS
+if HAVE_XMLTO
+
+# Main DocBook/XML files (DOCTYPE book)
+docbook = dmx.xml scaled.xml
+
+# Generate DocBook/XML output formats with or without stylesheets
+include $(top_srcdir)/devbook.am
+
+endif HAVE_XMLTO
+endif ENABLE_DEVEL_DOCS
+
+EXTRA_DIST = DMXSpec.txt DMXSpec-v1.txt
diff --git a/xorg-server/hw/dmx/doc/doxygen.conf.in b/xorg-server/hw/dmx/doc/doxygen.conf.in
deleted file mode 100644
index f886a436f..000000000
--- a/xorg-server/hw/dmx/doc/doxygen.conf.in
+++ /dev/null
@@ -1,1053 +0,0 @@
-# Doxyfile 1.3.4
-
-# This file describes the settings to be used by the documentation system
-# doxygen (www.doxygen.org) for a project
-#
-# All text after a hash (#) is considered a comment and will be ignored
-# The format is:
-#       TAG = value [value, ...]
-# For lists items can also be appended using:
-#       TAG += value [value, ...]
-# Values that contain spaces should be placed between quotes (" ")
-
-#---------------------------------------------------------------------------
-# Project related configuration options
-#---------------------------------------------------------------------------
-
-# The PROJECT_NAME tag is a single word (or a sequence of words surrounded 
-# by quotes) that should identify the project.
-
-PROJECT_NAME           = "Distributed Multihead X"
-
-# The PROJECT_NUMBER tag can be used to enter a project or revision number. 
-# This could be handy for archiving the generated documentation or 
-# if some version control system is used.
-
-PROJECT_NUMBER         = "dmx-1-2-20040604 and later"
-
-# The OUTPUT_DIRECTORY tag is used to specify the (relative or absolute) 
-# base path where the generated documentation will be put. 
-# If a relative path is entered, it will be relative to the location 
-# where doxygen was started. If left blank the current directory will be used.
-
-OUTPUT_DIRECTORY       = 
-
-# The OUTPUT_LANGUAGE tag is used to specify the language in which all 
-# documentation generated by doxygen is written. Doxygen will use this 
-# information to generate all constant output in the proper language. 
-# The default language is English, other supported languages are: 
-# Brazilian, Catalan, Chinese, Chinese-Traditional, Croatian, Czech, Danish, Dutch, 
-# Finnish, French, German, Greek, Hungarian, Italian, Japanese, Japanese-en 
-# (Japanese with English messages), Korean, Norwegian, Polish, Portuguese, 
-# Romanian, Russian, Serbian, Slovak, Slovene, Spanish, Swedish, and Ukrainian.
-
-OUTPUT_LANGUAGE        = English
-
-# If the BRIEF_MEMBER_DESC tag is set to YES (the default) Doxygen will 
-# include brief member descriptions after the members that are listed in 
-# the file and class documentation (similar to JavaDoc). 
-# Set to NO to disable this.
-
-BRIEF_MEMBER_DESC      = YES
-
-# If the REPEAT_BRIEF tag is set to YES (the default) Doxygen will prepend 
-# the brief description of a member or function before the detailed description. 
-# Note: if both HIDE_UNDOC_MEMBERS and BRIEF_MEMBER_DESC are set to NO, the 
-# brief descriptions will be completely suppressed.
-
-REPEAT_BRIEF           = YES
-
-# If the ALWAYS_DETAILED_SEC and REPEAT_BRIEF tags are both set to YES then 
-# Doxygen will generate a detailed section even if there is only a brief 
-# description.
-
-ALWAYS_DETAILED_SEC    = YES
-
-# If the INLINE_INHERITED_MEMB tag is set to YES, doxygen will show all inherited 
-# members of a class in the documentation of that class as if those members were 
-# ordinary class members. Constructors, destructors and assignment operators of 
-# the base classes will not be shown.
-
-INLINE_INHERITED_MEMB  = NO
-
-# If the FULL_PATH_NAMES tag is set to YES then Doxygen will prepend the full 
-# path before files name in the file list and in the header files. If set 
-# to NO the shortest path that makes the file name unique will be used.
-
-FULL_PATH_NAMES        = NO
-
-# If the FULL_PATH_NAMES tag is set to YES then the STRIP_FROM_PATH tag 
-# can be used to strip a user-defined part of the path. Stripping is 
-# only done if one of the specified strings matches the left-hand part of 
-# the path. It is allowed to use relative paths in the argument list.
-
-STRIP_FROM_PATH        = 
-
-# If the SHORT_NAMES tag is set to YES, doxygen will generate much shorter 
-# (but less readable) file names. This can be useful is your file systems 
-# doesn't support long names like on DOS, Mac, or CD-ROM.
-
-SHORT_NAMES            = NO
-
-# If the JAVADOC_AUTOBRIEF tag is set to YES then Doxygen 
-# will interpret the first line (until the first dot) of a JavaDoc-style 
-# comment as the brief description. If set to NO, the JavaDoc 
-# comments will behave just like the Qt-style comments (thus requiring an 
-# explict @brief command for a brief description.
-
-JAVADOC_AUTOBRIEF      = NO
-
-# The MULTILINE_CPP_IS_BRIEF tag can be set to YES to make Doxygen 
-# treat a multi-line C++ special comment block (i.e. a block of //! or /// 
-# comments) as a brief description. This used to be the default behaviour. 
-# The new default is to treat a multi-line C++ comment block as a detailed 
-# description. Set this tag to YES if you prefer the old behaviour instead.
-
-MULTILINE_CPP_IS_BRIEF = NO
-
-# If the INHERIT_DOCS tag is set to YES (the default) then an undocumented 
-# member inherits the documentation from any documented member that it 
-# reimplements.
-
-INHERIT_DOCS           = YES
-
-# If member grouping is used in the documentation and the DISTRIBUTE_GROUP_DOC 
-# tag is set to YES, then doxygen will reuse the documentation of the first 
-# member in the group (if any) for the other members of the group. By default 
-# all members of a group must be documented explicitly.
-
-DISTRIBUTE_GROUP_DOC   = NO
-
-# The TAB_SIZE tag can be used to set the number of spaces in a tab. 
-# Doxygen uses this value to replace tabs by spaces in code fragments.
-
-TAB_SIZE               = 8
-
-# This tag can be used to specify a number of aliases that acts 
-# as commands in the documentation. An alias has the form "name=value". 
-# For example adding "sideeffect=\par Side Effects:\n" will allow you to 
-# put the command \sideeffect (or @sideeffect) in the documentation, which 
-# will result in a user-defined paragraph with heading "Side Effects:". 
-# You can put \n's in the value part of an alias to insert newlines.
-
-ALIASES                = 
-
-# Set the OPTIMIZE_OUTPUT_FOR_C tag to YES if your project consists of C sources 
-# only. Doxygen will then generate output that is more tailored for C. 
-# For instance, some of the names that are used will be different. The list 
-# of all members will be omitted, etc.
-
-OPTIMIZE_OUTPUT_FOR_C  = YES
-
-# Set the OPTIMIZE_OUTPUT_JAVA tag to YES if your project consists of Java sources 
-# only. Doxygen will then generate output that is more tailored for Java. 
-# For instance, namespaces will be presented as packages, qualified scopes 
-# will look different, etc.
-
-OPTIMIZE_OUTPUT_JAVA   = NO
-
-# Set the SUBGROUPING tag to YES (the default) to allow class member groups of 
-# the same type (for instance a group of public functions) to be put as a 
-# subgroup of that type (e.g. under the Public Functions section). Set it to 
-# NO to prevent subgrouping. Alternatively, this can be done per class using 
-# the \nosubgrouping command.
-
-SUBGROUPING            = YES
-
-#---------------------------------------------------------------------------
-# Build related configuration options
-#---------------------------------------------------------------------------
-
-# If the EXTRACT_ALL tag is set to YES doxygen will assume all entities in 
-# documentation are documented, even if no documentation was available. 
-# Private class members and static file members will be hidden unless 
-# the EXTRACT_PRIVATE and EXTRACT_STATIC tags are set to YES
-
-EXTRACT_ALL            = YES
-
-# If the EXTRACT_PRIVATE tag is set to YES all private members of a class 
-# will be included in the documentation.
-
-EXTRACT_PRIVATE        = NO
-
-# If the EXTRACT_STATIC tag is set to YES all static members of a file 
-# will be included in the documentation.
-
-EXTRACT_STATIC         = YES
-
-# If the EXTRACT_LOCAL_CLASSES tag is set to YES classes (and structs) 
-# defined locally in source files will be included in the documentation. 
-# If set to NO only classes defined in header files are included.
-
-EXTRACT_LOCAL_CLASSES  = YES
-
-# If the HIDE_UNDOC_MEMBERS tag is set to YES, Doxygen will hide all 
-# undocumented members of documented classes, files or namespaces. 
-# If set to NO (the default) these members will be included in the 
-# various overviews, but no documentation section is generated. 
-# This option has no effect if EXTRACT_ALL is enabled.
-
-HIDE_UNDOC_MEMBERS     = YES
-
-# If the HIDE_UNDOC_CLASSES tag is set to YES, Doxygen will hide all 
-# undocumented classes that are normally visible in the class hierarchy. 
-# If set to NO (the default) these classes will be included in the various 
-# overviews. This option has no effect if EXTRACT_ALL is enabled.
-
-HIDE_UNDOC_CLASSES     = NO
-
-# If the HIDE_FRIEND_COMPOUNDS tag is set to YES, Doxygen will hide all 
-# friend (class|struct|union) declarations. 
-# If set to NO (the default) these declarations will be included in the 
-# documentation.
-
-HIDE_FRIEND_COMPOUNDS  = NO
-
-# If the HIDE_IN_BODY_DOCS tag is set to YES, Doxygen will hide any 
-# documentation blocks found inside the body of a function. 
-# If set to NO (the default) these blocks will be appended to the 
-# function's detailed documentation block.
-
-HIDE_IN_BODY_DOCS      = NO
-
-# The INTERNAL_DOCS tag determines if documentation 
-# that is typed after a \internal command is included. If the tag is set 
-# to NO (the default) then the documentation will be excluded. 
-# Set it to YES to include the internal documentation.
-
-INTERNAL_DOCS          = NO
-
-# If the CASE_SENSE_NAMES tag is set to NO then Doxygen will only generate 
-# file names in lower-case letters. If set to YES upper-case letters are also 
-# allowed. This is useful if you have classes or files whose names only differ 
-# in case and if your file system supports case sensitive file names. Windows 
-# users are advised to set this option to NO.
-
-CASE_SENSE_NAMES       = YES
-
-# If the HIDE_SCOPE_NAMES tag is set to NO (the default) then Doxygen 
-# will show members with their full class and namespace scopes in the 
-# documentation. If set to YES the scope will be hidden.
-
-HIDE_SCOPE_NAMES       = NO
-
-# If the SHOW_INCLUDE_FILES tag is set to YES (the default) then Doxygen 
-# will put a list of the files that are included by a file in the documentation 
-# of that file.
-
-SHOW_INCLUDE_FILES     = YES
-
-# If the INLINE_INFO tag is set to YES (the default) then a tag [inline] 
-# is inserted in the documentation for inline members.
-
-INLINE_INFO            = YES
-
-# If the SORT_MEMBER_DOCS tag is set to YES (the default) then doxygen 
-# will sort the (detailed) documentation of file and class members 
-# alphabetically by member name. If set to NO the members will appear in 
-# declaration order.
-
-SORT_MEMBER_DOCS       = YES
-
-# The GENERATE_TODOLIST tag can be used to enable (YES) or 
-# disable (NO) the todo list. This list is created by putting \todo 
-# commands in the documentation.
-
-GENERATE_TODOLIST      = YES
-
-# The GENERATE_TESTLIST tag can be used to enable (YES) or 
-# disable (NO) the test list. This list is created by putting \test 
-# commands in the documentation.
-
-GENERATE_TESTLIST      = YES
-
-# The GENERATE_BUGLIST tag can be used to enable (YES) or 
-# disable (NO) the bug list. This list is created by putting \bug 
-# commands in the documentation.
-
-GENERATE_BUGLIST       = YES
-
-# The GENERATE_DEPRECATEDLIST tag can be used to enable (YES) or 
-# disable (NO) the deprecated list. This list is created by putting 
-# \deprecated commands in the documentation.
-
-GENERATE_DEPRECATEDLIST= YES
-
-# The ENABLED_SECTIONS tag can be used to enable conditional 
-# documentation sections, marked by \if sectionname ... \endif.
-
-ENABLED_SECTIONS       = 
-
-# The MAX_INITIALIZER_LINES tag determines the maximum number of lines 
-# the initial value of a variable or define consists of for it to appear in 
-# the documentation. If the initializer consists of more lines than specified 
-# here it will be hidden. Use a value of 0 to hide initializers completely. 
-# The appearance of the initializer of individual variables and defines in the 
-# documentation can be controlled using \showinitializer or \hideinitializer 
-# command in the documentation regardless of this setting.
-
-MAX_INITIALIZER_LINES  = 30
-
-# Set the SHOW_USED_FILES tag to NO to disable the list of files generated 
-# at the bottom of the documentation of classes and structs. If set to YES the 
-# list will mention the files that were used to generate the documentation.
-
-SHOW_USED_FILES        = YES
-
-#---------------------------------------------------------------------------
-# configuration options related to warning and progress messages
-#---------------------------------------------------------------------------
-
-# The QUIET tag can be used to turn on/off the messages that are generated 
-# by doxygen. Possible values are YES and NO. If left blank NO is used.
-
-QUIET                  = YES
-
-# The WARNINGS tag can be used to turn on/off the warning messages that are 
-# generated by doxygen. Possible values are YES and NO. If left blank 
-# NO is used.
-
-WARNINGS               = YES
-
-# If WARN_IF_UNDOCUMENTED is set to YES, then doxygen will generate warnings 
-# for undocumented members. If EXTRACT_ALL is set to YES then this flag will 
-# automatically be disabled.
-
-WARN_IF_UNDOCUMENTED   = YES
-
-# If WARN_IF_DOC_ERROR is set to YES, doxygen will generate warnings for 
-# potential errors in the documentation, such as not documenting some 
-# parameters in a documented function, or documenting parameters that 
-# don't exist or using markup commands wrongly.
-
-WARN_IF_DOC_ERROR      = YES
-
-# The WARN_FORMAT tag determines the format of the warning messages that 
-# doxygen can produce. The string should contain the $file, $line, and $text 
-# tags, which will be replaced by the file and line number from which the 
-# warning originated and the warning text.
-
-WARN_FORMAT            = "$file:$line: $text"
-
-# The WARN_LOGFILE tag can be used to specify a file to which warning 
-# and error messages should be written. If left blank the output is written 
-# to stderr.
-
-WARN_LOGFILE           = 
-
-#---------------------------------------------------------------------------
-# configuration options related to the input files
-#---------------------------------------------------------------------------
-
-# The INPUT tag can be used to specify the files and/or directories that contain 
-# documented source files. You may enter file names like "myfile.cpp" or 
-# directories like "/usr/src/myproject". Separate the files or directories 
-# with spaces.
-
-INPUT                  = @srcdir@/.. \
-                         @srcdir@/../input \
-                         @srcdir@/../config
-
-# If the value of the INPUT tag contains directories, you can use the 
-# FILE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp 
-# and *.h) to filter out the source-files in the directories. If left 
-# blank the following patterns are tested: 
-# *.c *.cc *.cxx *.cpp *.c++ *.java *.ii *.ixx *.ipp *.i++ *.inl *.h *.hh *.hxx *.hpp 
-# *.h++ *.idl *.odl *.cs *.php *.php3 *.inc
-
-FILE_PATTERNS          = 
-
-# The RECURSIVE tag can be used to turn specify whether or not subdirectories 
-# should be searched for input files as well. Possible values are YES and NO. 
-# If left blank NO is used.
-
-RECURSIVE              = NO
-
-# The EXCLUDE tag can be used to specify files and/or directories that should 
-# excluded from the INPUT source files. This way you can easily exclude a 
-# subdirectory from a directory tree whose root is specified with the INPUT tag.
-
-EXCLUDE                = @srcdir@/../config/parser.c \
-                         @srcdir@/../config/parser.h \
-                         @srcdir@/../config/scanner.c
-
-# The EXCLUDE_SYMLINKS tag can be used select whether or not files or directories 
-# that are symbolic links (a Unix filesystem feature) are excluded from the input.
-
-EXCLUDE_SYMLINKS       = YES
-
-# If the value of the INPUT tag contains directories, you can use the 
-# EXCLUDE_PATTERNS tag to specify one or more wildcard patterns to exclude 
-# certain files from those directories.
-
-EXCLUDE_PATTERNS       = atKeynames.h \
-                         Canvas*.*
-
-# The EXAMPLE_PATH tag can be used to specify one or more files or 
-# directories that contain example code fragments that are included (see 
-# the \include command).
-
-EXAMPLE_PATH           = 
-
-# If the value of the EXAMPLE_PATH tag contains directories, you can use the 
-# EXAMPLE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp 
-# and *.h) to filter out the source-files in the directories. If left 
-# blank all files are included.
-
-EXAMPLE_PATTERNS       = 
-
-# If the EXAMPLE_RECURSIVE tag is set to YES then subdirectories will be 
-# searched for input files to be used with the \include or \dontinclude 
-# commands irrespective of the value of the RECURSIVE tag. 
-# Possible values are YES and NO. If left blank NO is used.
-
-EXAMPLE_RECURSIVE      = NO
-
-# The IMAGE_PATH tag can be used to specify one or more files or 
-# directories that contain image that are included in the documentation (see 
-# the \image command).
-
-IMAGE_PATH             = 
-
-# The INPUT_FILTER tag can be used to specify a program that doxygen should 
-# invoke to filter for each input file. Doxygen will invoke the filter program 
-# by executing (via popen()) the command <filter> <input-file>, where <filter> 
-# is the value of the INPUT_FILTER tag, and <input-file> is the name of an 
-# input file. Doxygen will then use the output that the filter program writes 
-# to standard output.
-
-INPUT_FILTER           = 
-
-# If the FILTER_SOURCE_FILES tag is set to YES, the input filter (if set using 
-# INPUT_FILTER) will be used to filter the input files when producing source 
-# files to browse (i.e. when SOURCE_BROWSER is set to YES).
-
-FILTER_SOURCE_FILES    = NO
-
-#---------------------------------------------------------------------------
-# configuration options related to source browsing
-#---------------------------------------------------------------------------
-
-# If the SOURCE_BROWSER tag is set to YES then a list of source files will 
-# be generated. Documented entities will be cross-referenced with these sources.
-
-SOURCE_BROWSER         = NO
-
-# Setting the INLINE_SOURCES tag to YES will include the body 
-# of functions and classes directly in the documentation.
-
-INLINE_SOURCES         = NO
-
-# Setting the STRIP_CODE_COMMENTS tag to YES (the default) will instruct 
-# doxygen to hide any special comment blocks from generated source code 
-# fragments. Normal C and C++ comments will always remain visible.
-
-STRIP_CODE_COMMENTS    = YES
-
-# If the REFERENCED_BY_RELATION tag is set to YES (the default) 
-# then for each documented function all documented 
-# functions referencing it will be listed.
-
-REFERENCED_BY_RELATION = YES
-
-# If the REFERENCES_RELATION tag is set to YES (the default) 
-# then for each documented function all documented entities 
-# called/used by that function will be listed.
-
-REFERENCES_RELATION    = YES
-
-# If the VERBATIM_HEADERS tag is set to YES (the default) then Doxygen 
-# will generate a verbatim copy of the header file for each class for 
-# which an include is specified. Set to NO to disable this.
-
-VERBATIM_HEADERS       = YES
-
-#---------------------------------------------------------------------------
-# configuration options related to the alphabetical class index
-#---------------------------------------------------------------------------
-
-# If the ALPHABETICAL_INDEX tag is set to YES, an alphabetical index 
-# of all compounds will be generated. Enable this if the project 
-# contains a lot of classes, structs, unions or interfaces.
-
-ALPHABETICAL_INDEX     = YES
-
-# If the alphabetical index is enabled (see ALPHABETICAL_INDEX) then 
-# the COLS_IN_ALPHA_INDEX tag can be used to specify the number of columns 
-# in which this list will be split (can be a number in the range [1..20])
-
-COLS_IN_ALPHA_INDEX    = 5
-
-# In case all classes in a project start with a common prefix, all 
-# classes will be put under the same header in the alphabetical index. 
-# The IGNORE_PREFIX tag can be used to specify one or more prefixes that 
-# should be ignored while generating the index headers.
-
-IGNORE_PREFIX          = 
-
-#---------------------------------------------------------------------------
-# configuration options related to the HTML output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_HTML tag is set to YES (the default) Doxygen will 
-# generate HTML output.
-
-GENERATE_HTML          = YES
-
-# The HTML_OUTPUT tag is used to specify where the HTML docs will be put. 
-# If a relative path is entered the value of OUTPUT_DIRECTORY will be 
-# put in front of it. If left blank `html' will be used as the default path.
-
-HTML_OUTPUT            = html
-
-# The HTML_FILE_EXTENSION tag can be used to specify the file extension for 
-# each generated HTML page (for example: .htm,.php,.asp). If it is left blank 
-# doxygen will generate files with .html extension.
-
-HTML_FILE_EXTENSION    = .html
-
-# The HTML_HEADER tag can be used to specify a personal HTML header for 
-# each generated HTML page. If it is left blank doxygen will generate a 
-# standard header.
-
-HTML_HEADER            = @srcdir@/doxygen.head
-
-# The HTML_FOOTER tag can be used to specify a personal HTML footer for 
-# each generated HTML page. If it is left blank doxygen will generate a 
-# standard footer.
-
-HTML_FOOTER            = @srcdir@/doxygen.foot
-
-# The HTML_STYLESHEET tag can be used to specify a user-defined cascading 
-# style sheet that is used by each HTML page. It can be used to 
-# fine-tune the look of the HTML output. If the tag is left blank doxygen 
-# will generate a default style sheet
-
-HTML_STYLESHEET        = @srcdir@/doxygen.css
-
-# If the HTML_ALIGN_MEMBERS tag is set to YES, the members of classes, 
-# files or namespaces will be aligned in HTML using tables. If set to 
-# NO a bullet list will be used.
-
-HTML_ALIGN_MEMBERS     = YES
-
-# If the GENERATE_HTMLHELP tag is set to YES, additional index files 
-# will be generated that can be used as input for tools like the 
-# Microsoft HTML help workshop to generate a compressed HTML help file (.chm) 
-# of the generated HTML documentation.
-
-GENERATE_HTMLHELP      = NO
-
-# If the GENERATE_HTMLHELP tag is set to YES, the CHM_FILE tag can 
-# be used to specify the file name of the resulting .chm file. You 
-# can add a path in front of the file if the result should not be 
-# written to the html output dir.
-
-CHM_FILE               = 
-
-# If the GENERATE_HTMLHELP tag is set to YES, the HHC_LOCATION tag can 
-# be used to specify the location (absolute path including file name) of 
-# the HTML help compiler (hhc.exe). If non-empty doxygen will try to run 
-# the HTML help compiler on the generated index.hhp.
-
-HHC_LOCATION           = 
-
-# If the GENERATE_HTMLHELP tag is set to YES, the GENERATE_CHI flag 
-# controls if a separate .chi index file is generated (YES) or that 
-# it should be included in the master .chm file (NO).
-
-GENERATE_CHI           = NO
-
-# If the GENERATE_HTMLHELP tag is set to YES, the BINARY_TOC flag 
-# controls whether a binary table of contents is generated (YES) or a 
-# normal table of contents (NO) in the .chm file.
-
-BINARY_TOC             = NO
-
-# The TOC_EXPAND flag can be set to YES to add extra items for group members 
-# to the contents of the HTML help documentation and to the tree view.
-
-TOC_EXPAND             = NO
-
-# The DISABLE_INDEX tag can be used to turn on/off the condensed index at 
-# top of each HTML page. The value NO (the default) enables the index and 
-# the value YES disables it.
-
-DISABLE_INDEX          = NO
-
-# This tag can be used to set the number of enum values (range [1..20]) 
-# that doxygen will group on one line in the generated HTML documentation.
-
-ENUM_VALUES_PER_LINE   = 4
-
-# If the GENERATE_TREEVIEW tag is set to YES, a side panel will be
-# generated containing a tree-like index structure (just like the one that 
-# is generated for HTML Help). For this to work a browser that supports 
-# JavaScript, DHTML, CSS and frames is required (for instance Mozilla 1.0+, 
-# Netscape 6.0+, Internet explorer 5.0+, or Konqueror). Windows users are 
-# probably better off using the HTML help feature.
-
-GENERATE_TREEVIEW      = YES
-
-# If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be 
-# used to set the initial width (in pixels) of the frame in which the tree 
-# is shown.
-
-TREEVIEW_WIDTH         = 250
-
-#---------------------------------------------------------------------------
-# configuration options related to the LaTeX output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_LATEX tag is set to YES (the default) Doxygen will 
-# generate Latex output.
-
-GENERATE_LATEX         = NO
-
-# The LATEX_OUTPUT tag is used to specify where the LaTeX docs will be put. 
-# If a relative path is entered the value of OUTPUT_DIRECTORY will be 
-# put in front of it. If left blank `latex' will be used as the default path.
-
-LATEX_OUTPUT           = latex
-
-# The LATEX_CMD_NAME tag can be used to specify the LaTeX command name to be 
-# invoked. If left blank `latex' will be used as the default command name.
-
-LATEX_CMD_NAME         = latex
-
-# The MAKEINDEX_CMD_NAME tag can be used to specify the command name to 
-# generate index for LaTeX. If left blank `makeindex' will be used as the 
-# default command name.
-
-MAKEINDEX_CMD_NAME     = makeindex
-
-# If the COMPACT_LATEX tag is set to YES Doxygen generates more compact 
-# LaTeX documents. This may be useful for small projects and may help to 
-# save some trees in general.
-
-COMPACT_LATEX          = NO
-
-# The PAPER_TYPE tag can be used to set the paper type that is used 
-# by the printer. Possible values are: a4, a4wide, letter, legal and 
-# executive. If left blank a4wide will be used.
-
-PAPER_TYPE             = a4wide
-
-# The EXTRA_PACKAGES tag can be to specify one or more names of LaTeX 
-# packages that should be included in the LaTeX output.
-
-EXTRA_PACKAGES         = 
-
-# The LATEX_HEADER tag can be used to specify a personal LaTeX header for 
-# the generated latex document. The header should contain everything until 
-# the first chapter. If it is left blank doxygen will generate a 
-# standard header. Notice: only use this tag if you know what you are doing!
-
-LATEX_HEADER           = 
-
-# If the PDF_HYPERLINKS tag is set to YES, the LaTeX that is generated 
-# is prepared for conversion to pdf (using ps2pdf). The pdf file will 
-# contain links (just like the HTML output) instead of page references 
-# This makes the output suitable for online browsing using a pdf viewer.
-
-PDF_HYPERLINKS         = NO
-
-# If the USE_PDFLATEX tag is set to YES, pdflatex will be used instead of 
-# plain latex in the generated Makefile. Set this option to YES to get a 
-# higher quality PDF documentation.
-
-USE_PDFLATEX           = NO
-
-# If the LATEX_BATCHMODE tag is set to YES, doxygen will add the \\batchmode. 
-# command to the generated LaTeX files. This will instruct LaTeX to keep 
-# running if errors occur, instead of asking the user for help. 
-# This option is also used when generating formulas in HTML.
-
-LATEX_BATCHMODE        = NO
-
-# If LATEX_HIDE_INDICES is set to YES then doxygen will not 
-# include the index chapters (such as File Index, Compound Index, etc.) 
-# in the output.
-
-LATEX_HIDE_INDICES     = NO
-
-#---------------------------------------------------------------------------
-# configuration options related to the RTF output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_RTF tag is set to YES Doxygen will generate RTF output 
-# The RTF output is optimised for Word 97 and may not look very pretty with 
-# other RTF readers or editors.
-
-GENERATE_RTF           = NO
-
-# The RTF_OUTPUT tag is used to specify where the RTF docs will be put. 
-# If a relative path is entered the value of OUTPUT_DIRECTORY will be 
-# put in front of it. If left blank `rtf' will be used as the default path.
-
-RTF_OUTPUT             = rtf
-
-# If the COMPACT_RTF tag is set to YES Doxygen generates more compact 
-# RTF documents. This may be useful for small projects and may help to 
-# save some trees in general.
-
-COMPACT_RTF            = NO
-
-# If the RTF_HYPERLINKS tag is set to YES, the RTF that is generated 
-# will contain hyperlink fields. The RTF file will 
-# contain links (just like the HTML output) instead of page references. 
-# This makes the output suitable for online browsing using WORD or other 
-# programs which support those fields. 
-# Note: wordpad (write) and others do not support links.
-
-RTF_HYPERLINKS         = NO
-
-# Load stylesheet definitions from file. Syntax is similar to doxygen's 
-# config file, i.e. a series of assigments. You only have to provide 
-# replacements, missing definitions are set to their default value.
-
-RTF_STYLESHEET_FILE    = 
-
-# Set optional variables used in the generation of an rtf document. 
-# Syntax is similar to doxygen's config file.
-
-RTF_EXTENSIONS_FILE    = 
-
-#---------------------------------------------------------------------------
-# configuration options related to the man page output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_MAN tag is set to YES (the default) Doxygen will 
-# generate man pages
-
-GENERATE_MAN           = NO
-
-# The MAN_OUTPUT tag is used to specify where the man pages will be put. 
-# If a relative path is entered the value of OUTPUT_DIRECTORY will be 
-# put in front of it. If left blank `man' will be used as the default path.
-
-MAN_OUTPUT             = man
-
-# The MAN_EXTENSION tag determines the extension that is added to 
-# the generated man pages (default is the subroutine's section .3)
-
-MAN_EXTENSION          = .3
-
-# If the MAN_LINKS tag is set to YES and Doxygen generates man output, 
-# then it will generate one additional man file for each entity 
-# documented in the real man page(s). These additional files 
-# only source the real man page, but without them the man command 
-# would be unable to find the correct page. The default is NO.
-
-MAN_LINKS              = NO
-
-#---------------------------------------------------------------------------
-# configuration options related to the XML output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_XML tag is set to YES Doxygen will 
-# generate an XML file that captures the structure of 
-# the code including all documentation. Note that this 
-# feature is still experimental and incomplete at the 
-# moment.
-
-GENERATE_XML           = NO
-
-# The XML_OUTPUT tag is used to specify where the XML pages will be put. 
-# If a relative path is entered the value of OUTPUT_DIRECTORY will be 
-# put in front of it. If left blank `xml' will be used as the default path.
-
-XML_OUTPUT             = xml
-
-# The XML_SCHEMA tag can be used to specify an XML schema, 
-# which can be used by a validating XML parser to check the 
-# syntax of the XML files.
-
-XML_SCHEMA             = 
-
-# The XML_DTD tag can be used to specify an XML DTD, 
-# which can be used by a validating XML parser to check the 
-# syntax of the XML files.
-
-XML_DTD                = 
-
-#---------------------------------------------------------------------------
-# configuration options for the AutoGen Definitions output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_AUTOGEN_DEF tag is set to YES Doxygen will 
-# generate an AutoGen Definitions (see autogen.sf.net) file 
-# that captures the structure of the code including all 
-# documentation. Note that this feature is still experimental 
-# and incomplete at the moment.
-
-GENERATE_AUTOGEN_DEF   = NO
-
-#---------------------------------------------------------------------------
-# configuration options related to the Perl module output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_PERLMOD tag is set to YES Doxygen will 
-# generate a Perl module file that captures the structure of 
-# the code including all documentation. Note that this 
-# feature is still experimental and incomplete at the 
-# moment.
-
-GENERATE_PERLMOD       = NO
-
-# If the PERLMOD_LATEX tag is set to YES Doxygen will generate 
-# the necessary Makefile rules, Perl scripts and LaTeX code to be able 
-# to generate PDF and DVI output from the Perl module output.
-
-PERLMOD_LATEX          = NO
-
-# If the PERLMOD_PRETTY tag is set to YES the Perl module output will be 
-# nicely formatted so it can be parsed by a human reader.  This is useful 
-# if you want to understand what is going on.  On the other hand, if this 
-# tag is set to NO the size of the Perl module output will be much smaller 
-# and Perl will parse it just the same.
-
-PERLMOD_PRETTY         = YES
-
-# The names of the make variables in the generated doxyrules.make file 
-# are prefixed with the string contained in PERLMOD_MAKEVAR_PREFIX. 
-# This is useful so different doxyrules.make files included by the same 
-# Makefile don't overwrite each other's variables.
-
-PERLMOD_MAKEVAR_PREFIX = 
-
-#---------------------------------------------------------------------------
-# Configuration options related to the preprocessor   
-#---------------------------------------------------------------------------
-
-# If the ENABLE_PREPROCESSING tag is set to YES (the default) Doxygen will 
-# evaluate all C-preprocessor directives found in the sources and include 
-# files.
-
-ENABLE_PREPROCESSING   = YES
-
-# If the MACRO_EXPANSION tag is set to YES Doxygen will expand all macro 
-# names in the source code. If set to NO (the default) only conditional 
-# compilation will be performed. Macro expansion can be done in a controlled 
-# way by setting EXPAND_ONLY_PREDEF to YES.
-
-MACRO_EXPANSION        = NO
-
-# If the EXPAND_ONLY_PREDEF and MACRO_EXPANSION tags are both set to YES 
-# then the macro expansion is limited to the macros specified with the 
-# PREDEFINED and EXPAND_AS_PREDEFINED tags.
-
-EXPAND_ONLY_PREDEF     = NO
-
-# If the SEARCH_INCLUDES tag is set to YES (the default) the includes files 
-# in the INCLUDE_PATH (see below) will be search if a #include is found.
-
-SEARCH_INCLUDES        = YES
-
-# The INCLUDE_PATH tag can be used to specify one or more directories that 
-# contain include files that are not input files but should be processed by 
-# the preprocessor.
-
-INCLUDE_PATH           = 
-
-# You can use the INCLUDE_FILE_PATTERNS tag to specify one or more wildcard 
-# patterns (like *.h and *.hpp) to filter out the header-files in the 
-# directories. If left blank, the patterns specified with FILE_PATTERNS will 
-# be used.
-
-INCLUDE_FILE_PATTERNS  = 
-
-# The PREDEFINED tag can be used to specify one or more macro names that 
-# are defined before the preprocessor is started (similar to the -D option of 
-# gcc). The argument of the tag is a list of macros of the form: name 
-# or name=definition (no spaces). If the definition and the = are 
-# omitted =1 is assumed.
-
-PREDEFINED             = SHAPE \
-                         RENDER \
-                         XKB \
-                         XINPUT
-
-# If the MACRO_EXPANSION and EXPAND_ONLY_PREDEF tags are set to YES then 
-# this tag can be used to specify a list of macro names that should be expanded. 
-# The macro definition that is found in the sources will be used. 
-# Use the PREDEFINED tag if you want to use a different macro definition.
-
-EXPAND_AS_DEFINED      = 
-
-# If the SKIP_FUNCTION_MACROS tag is set to YES (the default) then 
-# doxygen's preprocessor will remove all function-like macros that are alone 
-# on a line, have an all uppercase name, and do not end with a semicolon. Such 
-# function macros are typically used for boiler-plate code, and will confuse the 
-# parser if not removed.
-
-SKIP_FUNCTION_MACROS   = YES
-
-#---------------------------------------------------------------------------
-# Configuration::addtions related to external references   
-#---------------------------------------------------------------------------
-
-# The TAGFILES option can be used to specify one or more tagfiles. 
-# Optionally an initial location of the external documentation 
-# can be added for each tagfile. The format of a tag file without 
-# this location is as follows: 
-#   TAGFILES = file1 file2 ... 
-# Adding location for the tag files is done as follows: 
-#   TAGFILES = file1=loc1 "file2 = loc2" ... 
-# where "loc1" and "loc2" can be relative or absolute paths or 
-# URLs. If a location is present for each tag, the installdox tool 
-# does not have to be run to correct the links.
-# Note that each tag file must have a unique name
-# (where the name does NOT include the path)
-# If a tag file is not located in the directory in which doxygen 
-# is run, you must also specify the path to the tagfile here.
-
-TAGFILES               = 
-
-# When a file name is specified after GENERATE_TAGFILE, doxygen will create 
-# a tag file that is based on the input files it reads.
-
-GENERATE_TAGFILE       = 
-
-# If the ALLEXTERNALS tag is set to YES all external classes will be listed 
-# in the class index. If set to NO only the inherited external classes 
-# will be listed.
-
-ALLEXTERNALS           = NO
-
-# If the EXTERNAL_GROUPS tag is set to YES all external groups will be listed 
-# in the modules index. If set to NO, only the current project's groups will 
-# be listed.
-
-EXTERNAL_GROUPS        = YES
-
-# The PERL_PATH should be the absolute path and name of the perl script 
-# interpreter (i.e. the result of `which perl').
-
-PERL_PATH              = /usr/bin/perl
-
-#---------------------------------------------------------------------------
-# Configuration options related to the dot tool   
-#---------------------------------------------------------------------------
-
-# If the CLASS_DIAGRAMS tag is set to YES (the default) Doxygen will 
-# generate a inheritance diagram (in HTML, RTF and LaTeX) for classes with base or 
-# super classes. Setting the tag to NO turns the diagrams off. Note that this 
-# option is superceded by the HAVE_DOT option below. This is only a fallback. It is 
-# recommended to install and use dot, since it yields more powerful graphs.
-
-CLASS_DIAGRAMS         = YES
-
-# If set to YES, the inheritance and collaboration graphs will hide 
-# inheritance and usage relations if the target is undocumented 
-# or is not a class.
-
-HIDE_UNDOC_RELATIONS   = YES
-
-# If you set the HAVE_DOT tag to YES then doxygen will assume the dot tool is 
-# available from the path. This tool is part of Graphviz, a graph visualization 
-# toolkit from AT&T and Lucent Bell Labs. The other options in this section 
-# have no effect if this option is set to NO (the default)
-
-HAVE_DOT               = NO
-
-# If the CLASS_GRAPH and HAVE_DOT tags are set to YES then doxygen 
-# will generate a graph for each documented class showing the direct and 
-# indirect inheritance relations. Setting this tag to YES will force the 
-# the CLASS_DIAGRAMS tag to NO.
-
-CLASS_GRAPH            = YES
-
-# If the COLLABORATION_GRAPH and HAVE_DOT tags are set to YES then doxygen 
-# will generate a graph for each documented class showing the direct and 
-# indirect implementation dependencies (inheritance, containment, and 
-# class references variables) of the class with other documented classes.
-
-COLLABORATION_GRAPH    = YES
-
-# If the UML_LOOK tag is set to YES doxygen will generate inheritance and 
-# collaboration diagrams in a style similiar to the OMG's Unified Modeling 
-# Language.
-
-UML_LOOK               = NO
-
-# If set to YES, the inheritance and collaboration graphs will show the 
-# relations between templates and their instances.
-
-TEMPLATE_RELATIONS     = YES
-
-# If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDE_GRAPH, and HAVE_DOT 
-# tags are set to YES then doxygen will generate a graph for each documented 
-# file showing the direct and indirect include dependencies of the file with 
-# other documented files.
-
-INCLUDE_GRAPH          = YES
-
-# If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDED_BY_GRAPH, and 
-# HAVE_DOT tags are set to YES then doxygen will generate a graph for each 
-# documented header file showing the documented files that directly or 
-# indirectly include this file.
-
-INCLUDED_BY_GRAPH      = YES
-
-# If the CALL_GRAPH and HAVE_DOT tags are set to YES then doxygen will 
-# generate a call dependency graph for every global function or class method. 
-# Note that enabling this option will significantly increase the time of a run. 
-# So in most cases it will be better to enable call graphs for selected 
-# functions only using the \callgraph command.
-
-CALL_GRAPH             = NO
-
-# If the GRAPHICAL_HIERARCHY and HAVE_DOT tags are set to YES then doxygen 
-# will graphical hierarchy of all classes instead of a textual one.
-
-GRAPHICAL_HIERARCHY    = YES
-
-# The DOT_IMAGE_FORMAT tag can be used to set the image format of the images 
-# generated by dot. Possible values are png, jpg, or gif
-# If left blank png will be used.
-
-DOT_IMAGE_FORMAT       = gif
-
-# The tag DOT_PATH can be used to specify the path where the dot tool can be 
-# found. If left blank, it is assumed the dot tool can be found on the path.
-
-DOT_PATH               = 
-
-# The DOTFILE_DIRS tag can be used to specify one or more directories that 
-# contain dot files that are included in the documentation (see the 
-# \dotfile command).
-
-DOTFILE_DIRS           = 
-
-# The MAX_DOT_GRAPH_DEPTH tag can be used to set the maximum depth of the 
-# graphs generated by dot. A depth value of 3 means that only nodes reachable 
-# from the root by following a path via at most 3 edges will be shown. Nodes that 
-# lay further from the root node will be omitted. Note that setting this option to 
-# 1 or 2 may greatly reduce the computation time needed for large code bases. Also 
-# note that a graph may be further truncated if the graph's image dimensions are 
-# not sufficient to fit the graph (see MAX_DOT_GRAPH_WIDTH and MAX_DOT_GRAPH_HEIGHT). 
-# If 0 is used for the depth value (the default), the graph is not depth-constrained.
-
-MAX_DOT_GRAPH_DEPTH    = 0
-
-# If the GENERATE_LEGEND tag is set to YES (the default) Doxygen will 
-# generate a legend page explaining the meaning of the various boxes and 
-# arrows in the dot generated graphs.
-
-GENERATE_LEGEND        = YES
-
-# If the DOT_CLEANUP tag is set to YES (the default) Doxygen will 
-# remove the intermediate dot files that are used to generate 
-# the various graphs.
-
-DOT_CLEANUP            = YES
-
-#---------------------------------------------------------------------------
-# Configuration::addtions related to the search engine   
-#---------------------------------------------------------------------------
-
-# The SEARCHENGINE tag specifies whether or not a search engine should be 
-# used. If set to NO the values of all tags below this one will be ignored.
-
-SEARCHENGINE           = NO
diff --git a/xorg-server/hw/dmx/doc/doxygen.css b/xorg-server/hw/dmx/doc/doxygen.css
deleted file mode 100644
index 841f709a7..000000000
--- a/xorg-server/hw/dmx/doc/doxygen.css
+++ /dev/null
@@ -1,49 +0,0 @@
-H1 { text-align: center; }
-CAPTION { font-weight: bold }
-A.qindex {}
-A.qindexRef {}
-A.el { text-decoration: none; font-weight: bold }
-A.elRef { font-weight: bold }
-A.code { text-decoration: none; font-weight: normal; color: #4444ee }
-A.codeRef { font-weight: normal; color: #4444ee }
-A:hover { text-decoration: none; background-color: #f2f2ff }
-DL.el { margin-left: -1cm }
-DIV.fragment { width: 100%; border: none; background-color: #eeeeee }
-DIV.ah { background-color: black; font-weight: bold; color: #ffffff; margin-bottom: 3px; margin-top: 3px }
-TD.md { background-color: #f2f2ff; font-weight: bold; }
-TD.mdname1 { background-color: #f2f2ff; font-weight: bold; color: #602020; }
-TD.mdname { background-color: #f2f2ff; font-weight: bold; color: #602020; width: 600px; }
-DIV.groupHeader { margin-left: 16px; margin-top: 12px; margin-bottom: 6px; font-weight: bold }
-DIV.groupText { margin-left: 16px; font-style: italic; font-size: smaller }
-BODY { background: white }
-TD.indexkey { 
-   background-color: #eeeeff; 
-   font-weight: bold; 
-   padding-right  : 10px; 
-   padding-top    : 2px; 
-   padding-left   : 10px; 
-   padding-bottom : 2px; 
-   margin-left    : 0px; 
-   margin-right   : 0px; 
-   margin-top     : 2px; 
-   margin-bottom  : 2px  
-}
-TD.indexvalue { 
-   background-color: #eeeeff; 
-   font-style: italic; 
-   padding-right  : 10px; 
-   padding-top    : 2px; 
-   padding-left   : 10px; 
-   padding-bottom : 2px; 
-   margin-left    : 0px; 
-   margin-right   : 0px; 
-   margin-top     : 2px; 
-   margin-bottom  : 2px  
-}
-FONT.keyword       { color: #008000 }
-FONT.keywordtype   { color: #604020 }
-FONT.keywordflow   { color: #e08000 }
-FONT.comment       { color: #800000 }
-FONT.preprocessor  { color: #806020 }
-FONT.stringliteral { color: #002080 }
-FONT.charliteral   { color: #008080 }
diff --git a/xorg-server/hw/dmx/doc/doxygen.foot b/xorg-server/hw/dmx/doc/doxygen.foot
deleted file mode 100644
index 3aca11763..000000000
--- a/xorg-server/hw/dmx/doc/doxygen.foot
+++ /dev/null
@@ -1,12 +0,0 @@
-    <hr>
-    <address>
-      <small>
-        Generated June 29, 2004 for <a
-        href="http://dmx.sourceforge.net">Distributed Multihead X</a> by
-        <a href="http://www.doxygen.org/index.html">doxygen</a>
-        1.3.4.
-      </small>
-    </addres>
-    </hr>
-  </body>
-</html>
diff --git a/xorg-server/hw/dmx/doc/doxygen.head b/xorg-server/hw/dmx/doc/doxygen.head
deleted file mode 100644
index 89bda8fda..000000000
--- a/xorg-server/hw/dmx/doc/doxygen.head
+++ /dev/null
@@ -1,8 +0,0 @@
-<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
-<html>
-  <head>
-    <meta http-equiv="Content-Type" content="text/html;charset=iso-8859-1">
-    <title>File Index</title>
-    <link href="doxygen.css" rel="stylesheet" type="text/css">
-  </head>
-  <body>