diff options
Diffstat (limited to 'xorg-server/hw/xfree86/Options')
| -rw-r--r-- | xorg-server/hw/xfree86/Options | 409 |
1 files changed, 0 insertions, 409 deletions
diff --git a/xorg-server/hw/xfree86/Options b/xorg-server/hw/xfree86/Options deleted file mode 100644 index c963cd3ce..000000000 --- a/xorg-server/hw/xfree86/Options +++ /dev/null @@ -1,409 +0,0 @@ -!! -!! Copyright (c) 2001 by The XFree86 Project, Inc. -!! -!! Permission is hereby granted, free of charge, to any person obtaining a -!! copy of this software and associated documentation files (the "Software"), -!! to deal in the Software without restriction, including without limitation -!! the rights to use, copy, modify, merge, publish, distribute, sublicense, -!! and/or sell copies of the Software, and to permit persons to whom the -!! Software is furnished to do so, subject to the following conditions: -!! -!! The above copyright notice and this permission notice shall be included in -!! all copies or substantial portions of the Software. -!! -!! THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR -!! IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, -!! FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL -!! THE XFREE86 PROJECT BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, -!! WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF -!! OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE -!! SOFTWARE. -!! -!! Except as contained in this notice, the name of the XFree86 Project shall -!! not be used in advertising or otherwise to promote the sale, use or other -!! dealings in this Software without prior written authorization from the -!! XFree86 Project. -!! -!! $XFree86: xc/programs/Xserver/hw/xfree86/Options,v 1.10 2003/02/15 06:46:30 paulo Exp $ - -!! XAA options -xaa.XaaNoCPUToScreenColorExpandFill:\ -Disables accelerated rectangular expansion blits from source patterns \ -stored in system memory (using a memory-mapped aperture). - -xaa.XaaNoColor8x8PatternFillRect:\ -Disables accelerated fills of a rectangular region with a full-color pattern. - -xaa.XaaNoColor8x8PatternFillTrap:\ -Disables accelerated fills of a trapezoidal region with a full-color pattern. - -xaa.XaaNoDashedBresenhamLine:\ -Disables accelerated dashed Bresenham line draws. - -xaa.XaaNoDashedTwoPointLine:\ -Disables accelerated dashed line draws between two arbitrary points. - -xaa.XaaNoImageWriteRect:\ -Disables acclerated transfers of full-color rectangular patterns from \ -system memory to video memory (using a memory-mapped aperture). - -xaa.XaaNoMono8x8PatternFillRect:\ -Disables accelerated fills of a rectangular region with a monochrome pattern. - -xaa.XaaNoMono8x8PatternFillTrap:\ -Disables accelerated fills of a trapezoidal region with a monochrome pattern. - -xaa.XaaNoOffscreenPixmaps:\ -Disables accelerated draws into pixmaps stored in offscreen video memory. - -xaa.XaaNoPixmapCache:\ -Disables caching of patterns in offscreen video memory. - -xaa.XaaNoScanlineCPUToScreenColorExpandFill:\ -Disables accelerated rectangular expansion blits from source patterns \ -stored in system memory (one scan line at a time). - -xaa.XaaNoScanlineImageWriteRect:\ -Disables accelerated transfers of full-color rectangular patterns from \ -system memory to video memory (one scan line at a time). - -xaa.XaaNoScreenToScreenColorExpandFill:\ -Disables accelerated rectangular expansion blits from source patterns \ -stored in off-screen video memory. - -xaa.XaaNoScreenToScreenCopy:\ -Disables accelerated copies of rectangular regions from one part of video \ -memory to another part of video memory. - -xaa.XaaNoSolidBresenhamLine:\ -Disables accelerated solid Bresenham line draws. - -xaa.XaaNoSolidFillRect:\ -Disables accelerated solid-color fills of rectangles. - -xaa.XaaNoSolidFillTrap:\ -Disables accelerated solid-color fills of Bresenham trapezoids. - -xaa.XaaNoSolidHorVertLine:\ -Disables accelerated solid horizontal and vertical line draws. - -xaa.XaaNoSolidTwoPointLine:\ -Disables accelerated solid line draws between two arbitrary points. - - -!! DDC Options -ddc.NoDDC:\ -Disables DDC (Display Data Channel) so that the Xserver doesn't try to talk to\ -the Monitor. \ -Default: off, implies DDC is used. - -ddc.NoDDC1:\ -Disables use of DDC version 1 (DDC using vertical refresh). \ -Default: off, implies DDC1 is used. - -ddc.NoDDC2:\ -Disables use of DDC version 2 (DDC using I2C - usually over vga connector). \ -Default: off, implies DDC2 is used. - - -!! FBDev options -fbdev.fbdev:\ -The framebuffer device to use. \ -Default: /dev/fb0. - -fbdev.ShadowFB:\ -Enable or disable use of the shadow framebuffer layer. \ -Default: on. - -fbdev.Rotate:\ -Enable rotation of the display. The supported values are "CW" (clockwise, \ -90 degrees), "UD" (upside down, 180 degrees) and "CCW" (counter clockwise, \ -270 degrees). Implies use of the shadow framebuffer layer. \ -Default: off. - - -!! MGA options -mga.ColorKey:\ -Set the colormap index used for the transparency key for the depth 8 plane \ -when operating in 8+24 overlay mode. The value must be in the range 2-255. \ -Default: 255. - -!mga.HWcursor:\ -!Enable or disable the HW cursor. Default: on. - -mga.MGASDRAM:\ -Specify whether G100, G200 or G400 cards have SDRAM. The driver attempts to \ -auto-detect this based on the card's PCI subsystem ID. This option may be \ -used to override that auto-detection. The mga driver is not able to \ -auto-detect the presence of of SDRAM on secondary heads in multihead \ -configurations so this option will often need to be specified in multihead \ -configurations. Default: auto-detected. - -mga.NoAccel:\ -Disable or enable 2D hardware acceleration. Default: acceleration is enabled. - -mga.OverclockMem:\ -Set clocks to values used by some commercial X-Servers (G100, G200 and \ -G400 only). Default: off. - -mga.Overlay:\ -Enable 8+24 overlay mode. Only appropriate for depth 24. (Note: the G100 is \ -unaccelerated in the 8+24 overlay mode due to a missing hardware feature). \ -Default: off. - -mga.PciRetry:\ -Enable or disable PCI retries. Default: off. - -mga.Rotate:\ -Rotate the display clockwise or counterclockwise. This mode is unaccelerated. \ -Default: no rotation. - -mga.ShadowFB:\ -Enable or disable use of the shadow framebuffer layer. Default: off. \ - -mga.SyncOnGreen:\ -Enable or disable combining the sync signals with the green signal. \ -Default: off. - -mga.UseFBDev:\ -Enable or disable use of on OS-specific fb interface (and is not supported \ -on all OSs). See fbdevhw(4) for further information. Default: off. - -mga.VideoKey:\ -This sets the default pixel value for the YUV video overlay key. \ -Default: undefined. - -mga.TexturedVideo:\ -This has XvImage support use the texture engine rather than the video \ -overlay. This option is only supported by the G200 and G400, and only in \ -16 and 32 bits per pixel. Default: off. - -mga.NoHal:\ -Matrox provides a "Hardware Abstraction Layer", \ -a separate binary which enables extra hardware features from G400 onwards. \ -Default: HAL is used. - -!mga.DigitalScreen:\ -! Option Ignored. Drivers auto-detect Digital output if they support it at all. -!Default: Auto-detected. - -! mga.TV:\ -! Option Ignored. Drivers auto-detect TV if they support TV out at all. -!Default: Auto-detected. - -mga.TVStandard:\ -(HAL only) Picture standard for TV out. Use "PAL" for 50Hz PAL. \ -Default: 60Hz NTSC. - -mga.CableType:\ -(HAL only) Set the cable type for TV out. Options are "SCART_RGB", \ -"SCART_COMPOSITE", or "SCART_TYPE2". Any other string enables the default. \ -Default: YC_COMPOSITE. - -mga.SwappedHead:\ -(HAL only) For Dual Head cards, reverse relationship between CRTC picture \ -generators and video output sockets. \ -Especially useful with TV or digital outputs. \ -Default: CRTC1 generates output for socket 1 and CRTC2 generates output for socket 2. - -mga.Crtc2Half:\ -In dual head mode, allow CRTC2 to use half of the video memory. \ -Default: CRTC2 uses min{8MB, half video RAM}, but see also Crtc2Ram. - -mga.Crtc2Ram:\ -In dual head mode, CRTC2 will use this many KB of video memory. \ -Overrrides Crtc2Half. \ -Default: CRTC2 uses min{8MB, half video RAM}, but see also Crtc2Half. - -mga.ShowCache:\ -An option for hackers. The pixmap cache lives in off-screen video memory. \ -This option extends the virtual desktop to show this part of video memory. \ -Default: Off. - -mga.AGPMode:\ -AGP bus speed multiplier, used by DRI. \ -Default: x1 (slowest but most stable). - - -!! R128 options - -!r128.SWcursor: \ -!Selects software cursor. \ -!Default: off. - -r128.NoAccel:\ -Enables or disables all hardware acceleration. \ -Default: on. - -r128.Dac6Bit:\ -Enables or disables the use of 6 bits per color component when in 8 bpp \ -mode (emulates VGA mode). \ -Default: off. - -r128.VideoKey:\ -This overrides the default pixel value for the YUV video overlay key. \ -Default: undefined. - -r128.Display:\ -Select display mode for devices which support flat panels. Supported\ -modes are "FP", "CRT", "Mirror", "BIOS". \ -Default: "FP". - -r128.ProgramFPRegs:\ -Enable or disable programming of the flat panel registers.\ -Beware that this may damage your panel, so use at your own risk. \ -Default: device dependant. - -r128.PanelWidth:\ -Override flat panel width in pixels. \ -Default: determined using BIOS. - -r128.PanelHeight:\ -Override flat panel height in pixels. \ -Default: determined using BIOS. - -r128.UseFBDev:\ -Enable or disable use of on OS-specific fb interface (and is not supported \ -on all OSs). See fbdevhw(4) for further information. Default: off. - -r128.DMAForXv:\ -Try or don't try to use DMA for Xv image transfers. This will reduce CPU \ -usage when playing big videos like DVDs, but may cause instabilities. \ -Default: off. - - -!! Radeon options - -radeon.SWcursor:\ -Selects software cursor. Default: off. - -radeon.NoAccel:\ -Disables all hardware acceleration. Default: off. - -radeon.Dac6Bit:\ -Enables or disables the use of 6 bits per color component when in 8 bpp \ -mode (emulates VGA mode). Default: off. - -radeon.VideoKey:\ -This overrides the default pixel value for the YUV video overlay key. \ -Default: undefined. - -radeon.UseFBDev:\ -Enable or disable use of an OS-specific framebuffer device interface \ -(which is not supported on all OSs). Default: off. - -radeon.AGPMode:\ -Set AGP data transfer rate. (used only when DRI is enabled) \ -Valid choices: 1 (default), 2 and 4 - -radeon.AGPFastWrite:\ -Enable AGP fast write. (used only when DRI is enabled) \ -Default: off. - -radeon.ForcePCIMode:\ -Force to use PCI GART for DRI acceleration. (used only when DRI is enabled) \ -Default: off. - -radeon.DDCMode:\ -Force to use the modes queried from the connected monitor. Default: off. - -radeon.CloneDisplay:\ -This option is only used for dual-head cards with only single screen section \ -specified in the configuration file. Valid choices: \ -0 - disable (one CRTC used for both heads) \ -1 - auto-detect (default) \ -2 - force on \ -3 - auto-detect + 2nd head overlay \ -4 - force on + 2nd head overlay \ - -radeon.CloneMode:\ -Set the first mode for the secondary head. It can be different from the modes \ -used for the primary head. If you don't have this line while clone is on, the \ -modes specified for the primary head will be used for the secondary head. - -radeon.CloneHSync:\ -Set the horizontal sync range for the secondary monitor. It is not required if \ -a DDC capable monitor is connected. Default: undefined. - -radeon.CloneVRefresh:\ -Set the vertical refresh range for the secondary monitor. It is not required \ -if a DDC capable monitor is connected. Default: undefined. - -radeon.PanelOff:\ -Disable panel output. Only used when clone is enabled. Default: off. - -radeon.EnablePageFlip:\ -Enable page flipping for 3D acceleration. This will increase performance but \ -not work correctly in some rare cases. Default: off. - - -!! NeoMagic options - -neo.StrangeLockups:\ -Before XFree86 version 4.2.0 many NeoMagic systems experienced \ -strange lockups unless they used the options \ -"XaaNoScanlineImageWriteRect" and "XaaNoScanlineCPUToScreenColorExpandFill". \ -Setting this to "No" is faster but will lock some machines. \ -Default: Yes. - -!! Vesa options -vesa.ShadowFB:\ -Enable or disable use of the shadow framebuffer layer. See shadowfb(4)\ -for further information. Default: on. - - -!! SiS Options -sis.NoAccel:\ -Disable or enable acceleration. \ -Default: acceleration is enabled. - -!sis.HWcursor:\ -!Enable or disable the HW cursor. \ -!Default: on. - -!sis.SWcursor:\ -!The opposite of HWCursor. \ -!Default: on. - -sis.NoXVideo:\ -Disable XV (XVideo) extension support. \ -Default: off. - -sis.SetMClk:\ -Set the memory clock in MHz. \ -Default: autodetect. - -sis.PciRetry:\ -Enable or disable PCI retries. \ -Default: on. - -sis.TurboQueue:\ -Enable or disable TurboQueue mode. \ -Default: off for SIS530, on for the others. - -sis.FastVram:\ -Enable or disable FastVram mode. \ -Default: on. - -sis.Rotate:\ -Rotate the display clockwise (CW) or counterclockwise (CCW). \ -This mode is unaccelerated, and uses the Shadow Frame Buffer layer \ -Default: no rotation. - -sis.ForceCRT2Type:\ -Force display type to one of: TV, LCD or VGA. \ -Default: autodetect. - -sis.ShadowFB:\ -Enable or disable use of the shadow framebuffer layer. See shadowfb(4) for \ -further information. Default: off. - -!! Generic driver options, apply to many drivers - -*.SWcursor:\ -See also HWcursor.\ -Default: Usually Off. - -*.HWcursor:\ -Use the hardware cursor. See also SWcursor. \ -Default: usually HWcursor, but some drivers may default to software. |