aboutsummaryrefslogtreecommitdiff
path: root/xorg-server/hw/xfree86/doc/README.DRI
diff options
context:
space:
mode:
Diffstat (limited to 'xorg-server/hw/xfree86/doc/README.DRI')
-rw-r--r--xorg-server/hw/xfree86/doc/README.DRI1256
1 files changed, 0 insertions, 1256 deletions
diff --git a/xorg-server/hw/xfree86/doc/README.DRI b/xorg-server/hw/xfree86/doc/README.DRI
deleted file mode 100644
index 7fc52eb32..000000000
--- a/xorg-server/hw/xfree86/doc/README.DRI
+++ /dev/null
@@ -1,1256 +0,0 @@
- DRI User Guide
-
- VA Linux Systems, Inc. Professional Services - Graphics.
-
- 15 June 2001
-
-1. Preamble
-
-1.1 Copyright
-
-Copyright 2000-2001 by VA Linux Systems, Inc. All Rights Reserved.
-
-Permission is granted to make and distribute verbatim copies of this document
-provided the copyright notice and this permission notice are preserved on all
-copies.
-
-1.2 Trademarks
-
-OpenGL is a registered trademark and SGI is a trademark of Silicon Graphics,
-Inc. Unix is a registered trademark of The Open Group. The `X' device and X
-Window System are trademarks of The Open Group. XFree86 is a trademark of
-The XFree86 Project. Linux is a registered trademark of Linus Torvalds.
-Intel is a registered trademark of Intel Corporation. 3Dlabs, GLINT, and
-Oxygen are either registered trademarks or trademarks of 3Dlabs Inc. Ltd.
-3dfx, Voodoo3, Voodoo4, and Voodoo5 are registered trademarks of 3dfx Inter-
-active, Incorporated. Matrox is a registered trademark of Matrox Electronic
-Systems Ltd. ATI Rage and Radeon are registered trademarks of ATI Technolo-
-gies, Inc. All other trademarks mentioned are the property of their respec-
-tive owners.
-
-2. Introduction
-
-With XFree86 4.x and the Direct Rendering Interface (DRI), hardware acceler-
-ated 3D graphics can be considered a standard feature on Linux workstations.
-Support for other operating systems, such as FreeBSD, is underway.
-
-This document describes how to use the DRI system and troubleshoot problems
-which may occur. Readers should have a basic understanding of Linux, X and
-OpenGL. See the resources section at the end for more documentation and
-software downloads.
-
-This document does not cover compilation or installation of XFree86 4.x. It
-is assumed that you've already installed a Linux distribution which includes
-XFree86 4.x or that you're an experienced Linux developer who has compiled
-the DRI for himself. DRI download, compilation and installation instructions
-can be found at http://dri.sourceforge.net/DRIcompile.html
-
-Edits, corrections and updates to this document may be mailed to <brian@tung-
-stengrahpics.com>.
-
-3. Supported Architectures & Hardware
-
-3.1 CPU Architectures
-
-The architectures currently supported by the DRI have grown from the initial
-Intel i386 systems to now include the Alpha Processor and the Sun SPARC
-machines.
-
-Intel's SSE (a.k.a. Katmai) instructions are used in optimized vertex trans-
-formation functions in Mesa-based drivers. This requires a recent Linux ker-
-nel both at compile and runtime. See the DRI Compile Guide for compile-time
-requirements. At runtime a check is made to determine if the CPU can execute
-SSE instructions. They're disabled otherwise.
-
-AMD's 3DNow! instructions are also used in optimized vertex transformation
-functions in the Mesa-based DRI drivers. 3DNow! is supported in most ver-
-sions of Linux. Like the SSE optimizations, a runtime check is made to
-determine if the CPU can execute 3DNow! instructions.
-
-Alpha-based systems can use Compaq's optimized math library for improved 3D
-performance. See the DRI Compilation Guide for details.
-
-3.2 Graphics Hardware
-
-XFree86 4.2 (or later versions) includes 3D acceleration for the following
-graphics hardware:
-
- o 3dfx, supported on Intel x86, AMD and Alpha:
-
- o Voodoo5 5500
-
- o Voodoo4 4500
-
- o Voodoo3 3500 TV
-
- o Voodoo3 3000 AGP
-
- o Voodoo3 3000 PCI
-
- o Voodoo3 2000 AGP
-
- o Voodoo3 2000 PCI
-
- o Voodoo Banshee
-
- o Velocity 100/200
-
- There are many configurations of 3dfx cards on the market. Not all have
- been tested.
-
- o Matrox, supported on Intel x86 and AMD:
-
- o Matrox G200
-
- o Matrox G400
-
- o Intel i810/i815/i830 (motherboard chipsets)
-
- o i810
-
- o i810-dc100
-
- o i810e
-
- o i815
-
- o i830
-
- o ATI Rage 128, supported on Intel x86, AMD and Alpha:
-
- o Rage Fury
-
- o Rage Magnum
-
- o XPERT 2000
-
- o XPERT 128
-
- o XPERT 99
-
- o All-in-Wonder 128
-
- o Rage 128 PCI (Alpha-based systems)
-
- Note that both PCI and AGP versions of Rage 128 based cards are sup-
- ported at this time.
-
- o ATI Radeon, supported on Intel x86, AMD and Alpha:
-
- o Radeon SDR AGP
-
- o Radeon DDR AGP
-
- o Radeon 32MB SDR PCI (Alpha-based systems)
-
- o Radeon 7000, M6 (RV100)
-
- o Radeon 7200 (R100)
-
- o Radeon 7500, M7 (RV200)
-
- o Radeon 8500, 9100 (R200)
-
- o Radeon 9000, M9 (RV250)
-
- o 3Dlabs, supported on Intel x86 and AMD:
-
- o Oxygen GMX 2000 (MX/Gamma based). Note: this driver is no longer
- being actively developed.
-
-Support for other hardware is underway. Most of the DRI development work is
-funded by contracts with IHVs. These contracts often prevent us from
-announcing drivers before they're released. Queries about upcoming drivers
-may not be answerable.
-
-4. Prerequisite Software
-
- o The DRI is available in XFree86 4.0 and later.
-
- o Some hardware drivers require specific versions of the Linux kernel for
- AGP support, etc. See section 10 for specifics.
-
- o You DO NOT need to install Mesa separately. The parts of Mesa needed
- for hardware acceleration are already in the XFree86/DRI project.
-
-5. Kernel Modules
-
-3D hardware acceleration requires a DRI kernel module that's specific to your
-graphics hardware.
-
-The DRI kernel module version must exactly match your running kernel version.
-Since there are so many versions of the kernel, it's difficult to provide
-precompiled kernel modules.
-
-While the Linux source tree includes the DRI kernel module sources, the lat-
-est DRI kernel sources will be found in the DRI source tree.
-
-See the DRI Compilation Guide for information on compiling the DRI kernel
-modules.
-
-XFree86 4.0.1 added automatic kernel module loading to the X server. On
-Linux, the X server uses modprobe to load kernel modules. In Linux 2.4.x the
-DRM kernel modules should be kept in /lib/modules/2.4.x/ker-
-nel/drivers/char/drm/ for automatic loading to work.
-
-Optionally, DRM kernel modules can be loaded manually with insmod prior to
-starting the X server.
-
-You can verify that the kernel module was installed with lsmod, checking the
-X server startup log, and checking that /proc/dri/0 exists.
-
-6. XF86Config file
-
-The XFree86 configuration file is usually found in /etc/X11/XF86Config. This
-section describes the parts which must be specially set for the DRI.
-
-First, the XF86Config file must load the GLX and DRI modules:
-
- Section "Module"
- ...
- # This loads the GLX module
- Load "glx"
- # This loads the DRI module
- Load "dri"
- EndSection
-
-Next, the DRI section can be used to restrict access to direct rendering. A
-client can only use direct rendering if it has permission to open the
-/dev/dri/card? file(s). The permissions on these DRI device files is con-
-trolled by the "DRI" section in the XF86Config file.
-
-If you want all of the users on your system to be able to use direct-render-
-ing, then use a simple DRI section like this:
-
- Section "DRI"
- Mode 0666
- EndSection
-
-This section will allow any user with a current connection to the X server to
-use direct rendering.
-
-If you want to restrict the use of direct-rendering to a certain group of
-users, then create a group for those users by editing the /etc/group file on
-your system. For example, you may want to create a group called xf86dri and
-place two users (e.g., fred and jane) in that group. To do that, you might
-add the following line to /etc/group:
-
- xf86dri:x:8000:fred,jane
-
-You have to be careful that the group id (8000 in this example) is unique.
-
-Then you would use the following DRI section:
-
- Section "DRI"
- Group "xf86dri"
- Mode 0660
- EndSection
-
-This would limit access to direct-rendering to those users in the xf86dri
-group (fred and jane in this example). When other users tried to use direct
-rendering, they would fall back to unaccelerated indirect rendering.
-
-[Note that there is a known bug in XFree86 4.0 that prevents some changes to
-the DRI section from taking effect. Until this bug is fixed, if you change
-the DRI section, please also remove the /dev/dri directory with the rm -rf
-/dev/dri command.]
-
-Finally, the XF86Config file needs Device and Screen sections specific to
-your hardware. Look in section 10: Hardware-Specific Information and Trou-
-bleshooting for details.
-
-7. Memory usage
-
-Using the 3D features of a graphics card requires more memory than when it's
-just used as a 2D device. Double buffering, depth buffering, stencil
-buffers, textures, etc. all require extra graphics memory. These features
-may require four times the memory used for a simple 2D display.
-
-If your graphics card doesn't have a lot of memory (less than 16MB, for exam-
-ple), you may have to reduce your screen size and/or color depth in order to
-use 3D features. Reducing the screen resolution will also leave more space
-for texture images, possibly improving 3D performance. If, for example, you
-play Quake3 at 1024x768 but start your display at 1600x1200 you might con-
-sider restarting X at 1024x768 in order to maximize your texture memory
-space.
-
-The documentation included with your card should have information about maxi-
-mum screen size when using 3D.
-
-8. Using 3D Acceleration
-
-This section describes how to link your application with libGL.so and verify
-that you are in fact using 3D acceleration.
-
-8.1 libGL.so
-
-Your OpenGL program must link with the libGL.so.1.2 library provided by
-XFree86. The libGL.so.1.2 library contains a GLX protocol encoder for indi-
-rect/remote rendering and DRI code for accessing hardware drivers. In par-
-ticular, be sure you're not using libGL.so from another source such as Mesa
-or the Utah GLX project.
-
-Unless it was built in a special way, the libGL.so library does not contain
-any 3D hardware driver code. Instead, libGL.so dynamically loads the appro-
-priate 3D driver during initialization.
-
-Most simple OpenGL programs also use the GLUT and GLU libraries. A source
-for these libraries is listed in the Resources section below.
-
-8.2 Compiling and linking an OpenGL program
-
-A simple GLUT/OpenGL program may be compiled and linked as follows:
-
- gcc program.c -I/usr/local/include -L/usr/local/lib -L/usr/X11R6/lib -lglut -lGLU -lGL -o program
-
-The -I option is used to specify where the GL/glut.h (and possibly the
-GL/gl.h and GL/glu.h) header file may be found.
-
-The -L options specify where the libglut.so and the X libraries are located.
-libGL.so and libGLU.so should be in /usr/lib, as specified by the
-Linux/OpenGL ABI standard.
-
-The -lglut -lGLU -lGL arguments specify that the application should link with
-the GLUT, GLU and GL libraries, in that order.
-
-8.3 Running your OpenGL program
-
-Simply typing ./program in your shell should execute the program.
-
-If you get an error message such as
-
- gears: error in loading shared libraries: libGL.so.1: cannot
- open shared object file: No such file or directory
-
-if means that the libGL.so.1 file is not the right location. Proceed to the
-trouble shooting section.
-
-8.4 libOSMesa.so
-
-OSMesa (Off-Screen Mesa) is an interface and driver for rendering 3D images
-into a user-allocated block of memory rather than an on-screen window. It
-was originally developed for Mesa before Mesa became part of the XFree86/DRI
-project. It can now be used with the XFree86/DRI libGL.so as well.
-
-libOSMesa.so implements the OSMesa interface and it must be linked with your
-application if you want to use the OSMesa functions. You must also link with
-libGL.so. For example:
-
- gcc osdemo.c -lOSMesa -lGLU -lGL -o osdemo
-
-In stand-alone Mesa this interface was compiled into the monolithic libGL.so
-(formerly libMesaGL.so) library. In XFree86 4.0.1 and later this interface
-is implemented in a separate library.
-
-8.5 glxinfo
-
-glxinfo is a useful program for checking which version of libGL you're using
-as well as which DRI-based driver. Simply type glxinfo and examine the
-OpenGL vendor, renderer, and version lines. Among the output you should see
-something like this:
-
- OpenGL vendor string: VA Linux Systems, Inc.
- OpenGL renderer string: Mesa DRI Voodoo3 20000224
- OpenGL version string: 1.2 Mesa 3.4
-
-or this:
-
- OpenGL vendor string: VA Linux Systems, Inc.
- OpenGL renderer string: Mesa GLX Indirect
- OpenGL version string: 1.2 Mesa 3.4
-
-The first example indicates that the 3dfx driver is using Voodoo3 hardware.
-The second example indicates that no hardware driver was found and indirect,
-unaccelerated rendering is being used.
-
-If you see that indirect rendering is being used when direct rendering was
-expected, proceed to the troubleshooting section.
-
-glxinfo also lists all of the GLX-enhanced visuals available so you can
-determine which visuals are double-bufferd, have depth (Z) buffers, stencil
-buffers, accumulation buffers, etc.
-
-8.6 Environment Variables
-
-The libGL.so library recognizes three environment variables. Normally, none
-of them need to be defined. If you're using the csh or tcsh shells, type
-setenv VARNAME value to set the variable. Otherwise, if you're using sh or
-bash, type export VARNAME=value.
-
- 1. LIBGL_DEBUG, if defined will cause libGL.so to print error and diagnos-
- tic messages. This can help to solve problems. Setting LIBGL_DEBUG to
- verbose may provide additional information.
-
- 2. LIBGL_ALWAYS_INDIRECT, if defined this will force libGL.so to always
- use indirect rendering instead of hardware acceleration. This can be
- useful to isolate rendering errors.
-
- 3. LIBGL_DRIVERS_PATH can be used to override the default directories
- which are searched for 3D drivers. The value is one or more paths sep-
- arated by colons. In a typical XFree86 installation, the 3D drivers
- should be in /usr/X11R6/lib/modules/dri/ and LIBGL_DRIVERS_PATH need
- not be defined. Note that this feature is disabled for set-uid pro-
- grams. This variable replaces the LIBGL_DRIVERS_DIR env var used in
- XFree86 4.0.
-
- 4. MESA_DEBUG, if defined, will cause Mesa-based 3D drivers to print user
- error messages to stderr. These are errors that you'd otherwise detect
- by calling glGetError.
-
-Mesa-based drivers (this includes most of the drivers listed above) also
-observe many of the existing Mesa environment variables. These include the
-MESA_DEBUG and MESA_INFO variables.
-
-9. General Trouble Shooting
-
-This section contains information to help you diagnose general problems. See
-below for additional information for specific hardware.
-
-9.1 Bus Mastering
-
-DMA-based DRI drivers (that's most DRI drivers) cannot function unless bus
-mastering is enabled for your graphics card. By default, some systems don't
-having bus mastering on. You should enable it in your BIOS.
-
-Alternately, you can check the status of bus mastering and change the setting
-from within Linux. There may be similar procedures for other operating sys-
-tems.
-
-Run lspci (as root) and find the information describing your graphics
-adapter. For example:
-
- 00:00.0 Host bridge: Intel Corporation 440BX/ZX - 82443BX/ZX Host bridge (rev 03)
- 00:01.0 PCI bridge: Intel Corporation 440BX/ZX - 82443BX/ZX AGP bridge (rev 03)
- 00:07.0 ISA bridge: Intel Corporation 82371AB PIIX4 ISA (rev 02)
- 00:07.1 IDE interface: Intel Corporation 82371AB PIIX4 IDE (rev 01)
- 00:07.2 USB Controller: Intel Corporation 82371AB PIIX4 USB (rev 01)
- 00:07.3 Bridge: Intel Corporation 82371AB PIIX4 ACPI (rev 02)
- 00:11.0 Ethernet controller: Intel Corporation 82557 [Ethernet Pro 100] (rev 08)
- 00:12.0 SCSI storage controller: Symbios Logic Inc. (formerly NCR) 53c895 (rev 02)
- 00:14.0 Multimedia audio controller: Ensoniq ES1371 [AudioPCI-97] (rev 08)
- 01:00.0 VGA compatible controller: 3Dfx Interactive, Inc.: Unknown device 0009 (rev 01)
-
-The bus, device, and function number comprise the device id, which is conven-
-tionally written in the form bus:dev.func, or in this case 01:00.0.
-
-Use the setpci command to examine bit two of register 4 for your graphics
-card. This will indicate whether or not bus mastering is enabled.
-
- setpci -s 01:00.0 4.w
-
-A hexadecimal value will be printed. Convert the least significant digit to
-binary. For example, if you see 3, that's 0011 in binary (bit two is 0). If
-you see 7, that's 0111 in binary (bit two is 1). In the first example, bus
-mastering is disabled. It's enabled in the second example.
-
-The following shell script will enabled bus mastering for your graphics card
-and host bridge. Run it as root.
-
- #!/bin/bash
- dev=01:00.0 # change as appropriate
- echo Enabling bus mastering on device $dev
- setpci -s $dev 4.w=$(printf %x $((0x$(setpci -s $dev 4.w)|4)))
- dev=00:00.0
- echo Enabling bus mastering on host bridge $dev
- setpci -s $dev 4.w=$(printf %x $((0x$(setpci -s $dev 4.w)|4)))
-
-You can check if this worked by running the first setpci command again.
-
-9.2 The X Server
-
- 1. Before you start the X server, verify the appropriate 3D kernel module
- is installed. Type lsmod and look for the appropriate kernel module.
- For 3dfx hardware you should see tdfx, for example.
-
- 2. Verify you're running XFree86 4.0 (or newer) and not an older version.
- If you run xdpyinfo and look for the following line near the top:
-
- vendor release number: 4000
-
- 3. Verify that your XF86Config file (usually found at /etc/X11/XF86Config)
- loads the glx and dri modules and has a DRI section.
-
- See the Software Resources section below for sample XF86Config files.
-
- 4. Examine the messages printed during X server startup and check that the
- DRM module loaded. Using the Voodoo3 as an example:
-
- (==) TDFX(0): Write-combining range (0xf0000000,0x2000000)
- (II) TDFX(0): Textures Memory 7.93 MB
- (0): [drm] created "tdfx" driver at busid "PCI:1:0:0"
- (0): [drm] added 4096 byte SAREA at 0xc65dd000
- (0): [drm] mapped SAREA 0xc65dd000 to 0x40013000
- (0): [drm] framebuffer handle = 0xf0000000
- (0): [drm] added 1 reserved context for kernel
- (II) TDFX(0): [drm] Registers = 0xfc000000
- (II) TDFX(0): visual configs initialized
- (II) TDFX(0): Using XFree86 Acceleration Architecture (XAA)
- Screen to screen bit blits
- Solid filled rectangles
- 8x8 mono pattern filled rectangles
- Indirect CPU to Screen color expansion
- Solid Lines
- Dashed Lines
- Offscreen Pixmaps
- Driver provided NonTEGlyphRenderer replacement
- Setting up tile and stipple cache:
- 10 128x128 slots
- (==) TDFX(0): Backing store disabled
- (==) TDFX(0): Silken mouse enabled
- (0): X context handle = 0x00000001
- (0): [drm] installed DRM signal handler
- (0): [DRI] installation complete
- (II) TDFX(0): direct rendering enabled
-
- 5. After the X server has started, verify that the required X server
- extensions are loaded. Run xdpyinfo and look for the following entries
- in the extensions list:
-
- GLX
- SGI-GLX
- XFree86-DRI
-
-9.3 Linking, running and verifying 3D acceleration
-
-After you've verified that the X server and DRI have started correctly it's
-time to verify that the GL library and hardware drivers are working cor-
-rectly.
-
- 1. Verify that you're using the correct libGL.so library with ldd. The
- /usr/lib and /usr/X11R6/lib directories are expected locations for
- libGL.so.
-
- Example:
-
- % ldd /usr/local/bin/glxinfo
- libglut.so.3 => /usr/local/lib/libglut.so.3 (0x40019000)
- libGLU.so.1 => /usr/local/lib/libGLU.so.1 (0x40051000)
- libGL.so.1 => /usr/lib/libGL.so.1 (0x40076000)
- libXmu.so.6 => /usr/X11R6/lib/libXmu.so.6 (0x402ee000)
- libXi.so.6 => /usr/X11R6/lib/libXi.so.6 (0x40301000)
- libm.so.6 => /lib/libm.so.6 (0x40309000)
- libc.so.6 => /lib/libc.so.6 (0x40325000)
- libX11.so.6 => /usr/X11R6/lib/libX11.so.6 (0x40419000)
- libXt.so.6 => /usr/X11R6/lib/libXt.so.6 (0x404bd000)
- libSM.so.6 => /usr/X11R6/lib/libSM.so.6 (0x40509000)
- libICE.so.6 => /usr/X11R6/lib/libICE.so.6 (0x40512000)
- libXext.so.6 => /usr/X11R6/lib/libXext.so.6 (0x40529000)
- libvga.so.1 => /usr/lib/libvga.so.1 (0x40537000)
- libpthread.so.0 => /lib/libpthread.so.0 (0x4057d000)
- /lib/ld-linux.so.2 => /lib/ld-linux.so.2 (0x40000000)
-
- 2. You may also double check that libGL.so is in fact DRI-capable. Run
- strings libGL.so.1.2 | grep DRI and look for symbols prefixed with
- "XF86DRI", such as "XF86DRIQueryExtension".
-
- 3. To be safe one should run ldconfig after installing libGL.so to be sure
- the runtime loader will find the proper library.
-
- 4. Verify that the appropriate 3D driver is in /usr/X11R6/lib/modules/dri/
- For example, the 3dfx driver will be named tdfx_dri.so.
-
- 5. Set the LIBGL_DEBUG environment variable. This will cause libGL.so to
- print an error message if it fails to load a DRI driver. Any error
- message printed should be self-explanatory.
-
- 6. Run glxinfo. Note the line labeled "OpenGL renderer string". It
- should have a value which starts with "Mesa DRI" followed by the name
- of your hardware.
-
- 7. Older Linux OpenGL applications may have been linked against Mesa's GL
- library and will not automatically use libGL.so. In some cases, making
- symbolic links from the Mesa GL library to libGL.so.1 will solve the
- problem:
-
- ln -s libGL.so.1 libMesaGL.so.3
-
- In other cases, the application will have to be relinked against the
- new XFree86 libGL.so.
-
- It is reported that part of the problem is that running ldconfig will
- silently rewrite symbolic links based on the SONAME field in libraries.
-
-If you're still having trouble, look in the next section for information spe-
-cific to your graphics card.
-
-10. Hardware-Specific Information and Troubleshooting
-
-This section presents hardware-specific information for normal use and trou-
-bleshooting.
-
-10.1 3dfx Banshee, Voodoo3, Voodoo4 and Voodoo5 Series
-
-10.1.1 Requirements
-
-The 3dfx DRI driver requires special versions of the 3dfx Glide library.
-Different versions of Glide are needed for Banshee/Voodoo3 than for
-Voodoo4/5. The Glide libraries can be downloaded from the DRI website.
-
-10.1.2 Configuration
-
-Your XF86Config file's device section must specify the tdfx device. For
-example:
-
- Section "Device"
- Identifier "Voodoo3"
- VendorName "3dfx"
- Driver "tdfx"
- EndSection
-
-Or,
-
- Section "Device"
- Identifier "Voodoo5"
- VendorName "3dfx"
- Driver "tdfx"
- EndSection
-
-The Screen section should then reference the Voodoo device:
-
- Section "Screen"
- Identifier "Screen 1"
- Device "Voodoo3"
- Monitor "High Res Monitor"
- DefaultDepth 16
- Subsection "Display"
- Depth 16
- Modes "1280x1024" "1024x768" "800x600" "640x480"
- ViewPort 0 0
- EndSubsection
- EndSection
-
-Or,
-
- Section "Screen"
- Identifier "Screen 1"
- Device "Voodoo5"
- Monitor "High Res Monitor"
- DefaultDepth 24
- Subsection "Display"
- Depth 16
- Modes "1280x1024" "1024x768" "800x600" "640x480"
- ViewPort 0 0
- EndSubsection
- Subsection "Display"
- Depth 24
- Modes "1280x1024" "1024x768" "800x600" "640x480"
- ViewPort 0 0
- EndSubsection
- EndSection
-
-The kernel module for 3dfx hardware is named tdfx.o and should be installed
-in /lib/modules/2.4.x/kernel/drivers/char/drm/. It will be automatically
-loaded by the Xserver if needed.
-
-The DRI 3D driver for 3dfx hardware should be in /usr/X11R6/lib/mod-
-ules/dri/tdfx_dri.so. This will be automatically loaded by libGL.so.
-
-The Voodoo5 supports 3D rendering in 16 and 32 bpp modes. When running in
-32bpp mode an 8-bit stencil buffer and 24-bit Z (depth) buffer are offered.
-When running in 16bpp mode only a 16-bit Z (depth) buffer is offered and
-stencil is implemented in software.
-
-A software-based accumulation buffer is available in both 16 and 32bpp modes.
-
-10.1.3 Troubleshooting
-
- o If you try to run an OpenGL application and see an error message similar
- to
-
- gd error (glide): gd error (glide): grSstSelect: non-existent SSTgd error (glide): grSstSelect: non-existent SSTS
-
- it means that you have the wrong version of the Glide library for your
- hardware.
-
- o 3D acceleration for Banshee and Voodoo3 is only supported in the 16
- bit/pixel screen mode. Use xdpyinfo to verify that all your visuals are
- depth 16. Edit your XF86Config file if needed.
-
- o The /dev/3dfx device is not used for DRI; it's only for Glide on older
- 3dfx hardware.
-
- o Different versions of Glide are needed for Voodoo3 and Voodoo5. See the
- DRI website's resources page to download the right version of Glide.
-
- o Voodoo4/5 may be run at 24bpp (instead of 32bpp, the default) but 3D
- acceleration is not supported in that mode. 32bpp mode is fully 3D
- accelerated.
-
-10.1.4 Performance and Features
-
- o Normally, buffer swapping in double-buffered applications is synchro-
- nized to your monitor's refresh rate. This may be overridden by setting
- the FX_GLIDE_SWAPINTERVAL environment variable. The value of this vari-
- able indicates the maximum number of swap buffer commands can be
- buffered. Zero allows maximum frame rate.
-
- o On Voodoo4/5, rendering with 16-bits/texel textures is faster than using
- 32-bit per texel textures. The internalFormat parameter to glTexImage2D
- can be used to control texel size. Quake3 and other games let you con-
- trol this as well.
-
- o The glTexEnv mode GL_BLEND is not directly supported by the Voodoo3
- hardware. It can be accomplished with a multipass algorithm but it's
- not implemented at this time. Applications which use that mode, such as
- the Performer Town demo, may become sluggish when falling back to soft-
- ware rendering to render in that mode.
-
- o The Voodoo3/Banshee driver reverts to software rendering under the fol-
- lowing conditions:
-
- o Setting GL_LIGHT_MODEL_COLOR_CONTROL to GL_SEPARATE_SPECULAR_COLOR.
-
- o Enabling line stippling or polygon stippling.
-
- o Enabling point smoothing or polygon smoothing.
-
- o Enabling line smoothing when line width is not 1.0. That is,
- antialiased lines are done in hardware only when the line width is
- 1.0.
-
- o Using 1-D or 3-D texture maps.
-
- o Using the GL_BLEND texture environment.
-
- o Using stencil operations.
-
- o Using the accumulation buffer.
-
- o Using glBlendEquation(GL_LOGIC_OP).
-
- o Using glDrawBuffer(GL_FRONT_AND_BACK).
-
- o Using glPolygonMode(face, GL_POINT) or glPolygonMode(face,
- GL_LINE).
-
- o Using point size attenuation (i.e. GL_DISTANCE_ATTENUATION_EXT).
-
- o Using glColorMask(r, g, b, a) when r!=g or g!=b.
-
- o The Voodoo5 driver reverts to software rendering under the same condi-
- tions Voodoo3 with three exceptions. First, stencil operations are
- implemented in hardware when the screen is configured for 32 bits/pixel.
- Second, the GL_BLEND texture env mode is fully supported in hardware.
- Third, glColorMask is fully supported in hardware when the screen is
- configured for 32 bits/pixel.
-
- o As of January, 2001 the second VSA-100 chip on the Voodoo5 is not yet
- operational. Therefore, the board isn't being used to its full capac-
- ity. The second VSA-100 chip will allow Scan-Line Interleave (SLI) mode
- for full-screen applications and games, potentially doubling the sys-
- tem's fill rate. When the second VSA-100 chip is activated glGet-
- String(GL_RENDERER) will report Voodoo5 instead of Voodoo4.
-
- o The lowest mipmap level is sometimes miscolored in trilinear- sampled
- polygons.
-
- o The GL_EXT_texture_env_combine extension is supported on the Voodoo4 and
- Voodoo5.
-
-10.1.5 Known Problems
-
- o The lowest mipmap level is sometimes miscolored in trilinear- sampled
- polygons (Voodoo3/Banshee).
-
- o Fog doesn't work with orthographic projections.
-
- o The accuracy of blending operations on Voodoo4/5 isn't always very good.
- If you run Glean, you'll find some test failures.
-
- o The Glide library cannot be used directly; it's only meant to be used
- via the tdfx DRI driver.
-
- o SSystem has problems because of poorly set near and far clipping planes.
- The office.unc Performer model also suffers from this problem.
-
-10.2 Intel i810
-
-10.2.1 Requirements
-
-A kernel with AGP GART support (such as Linux 2.4.x) is needed.
-
-10.2.2 Configuration
-
-Your XF86Config file's device section must specify the i810 device, and spec-
-ify a usable amount of video ram to reserve.
-
- Section "Device"
- Identifier "i810"
- VendorName "Intel"
- Driver "i810"
- Option "AGPMode" "1"
- VideoRam 10000
- EndSection
-
-The Screen section should then reference the i810 device:
-
- Section "Screen"
- Identifier "Screen 1"
- Device "i810"
- Monitor "High Res Monitor"
- DefaultDepth 16
- Subsection "Display"
- Depth 16
- Modes "1280x1024" "1024x768" "800x600" "640x480"
- ViewPort 0 0
- EndSubsection
- EndSection
-
-The kernel module for the i810 is named i810.o and should be installed in
-/lib/modules/2.4.x/kernel/drivers/char/drm/. It will be automatically loaded
-by the Xserver if needed.
-
-The DRI 3D driver for the i810 should be in /usr/X11R6/lib/mod-
-ules/dri/i810_dri.so. This will be automatically loaded by libGL.so.
-
-10.2.3 Troubleshooting
-
- o 3D acceleration for the i810 is only available in the 16 bit/pixel
- screen mode at this time. 32bpp acceleration is not supported by this
- hardware. Use xdpyinfo to verify that all your visuals are depth 16.
- Edit your XF86Config file if needed.
-
- o The i810 uses system ram for video and 3d graphics. The X server will
- ordinarily reserve 4mb of ram for graphics, which is too little for an
- effective 3d setup. To tell the driver to use a larger amount, specify
- a VideoRam option in the Device section of your XF86Config file. A num-
- ber between 10000 and 16384 seems adequate for most requirements. If
- too little memory is available for DMA buffers, back and depth buffers
- and textures, direct rendering will be disabled.
-
-10.2.4 Performance and Features
-
-Basically all of the i810 features which can be exposed through OpenGL 1.2
-are implemented. However, the following OpenGL features are implemented in
-software and will be slow:
-
- o Stencil buffer and accumulation buffer operations
-
- o Blend subtract, min/max and logic op blend modes
-
- o glColorMask when any mask is set to false
-
- o GL_SEPARATE_SPECULAR_COLOR lighting mode
-
- o glDrawBuffer(GL_FRONT_AND_BACK)
-
- o Using 1D or 3D textures
-
- o Using texture borders
-
-10.3 Matrox G200 and G400
-
-10.3.1 Requirements
-
-A kernel with AGP GART support (such as Linux 2.4.x) is needed.
-
-10.3.2 Configuration
-
-Your XF86Config file's device section must specify the mga device:
-
- Section "Device"
- Identifier "MGA"
- VendorName "Matrox"
- Driver "mga"
- Option "AGPMode" "1"
- VideoRam 32768
- EndSection
-
-The Screen section should then reference the MGA device:
-
- Section "Screen"
- Identifier "Screen 1"
- Device "MGA"
- Monitor "High Res Monitor"
- DefaultDepth 16
- Subsection "Display"
- Depth 16
- Modes "1280x1024" "1024x768" "800x600" "640x480"
- ViewPort 0 0
- EndSubsection
- EndSection
-
-To use a 32bpp screen mode, use this Screen section instead:
-
- Section "Screen"
- Identifier "Screen 1"
- Device "MGA"
- Monitor "High Res Monitor"
- DefaultDepth 24
- DefaultFbBpp 32
- Subsection "Display"
- Depth 24
- Modes "1280x1024" "1024x768" "800x600" "640x480"
- ViewPort 0 0
- EndSubsection
- EndSection
-
-The kernel module for the G200/G400 is named mga.o and should be installed in
-/lib/modules/2.4.x/kernel/drivers/char/drm/. It will be automatically loaded
-by the Xserver if needed.
-
-The DRI 3D driver for the G200/G400 should be in /usr/X11R6/lib/mod-
-ules/dri/mga_dri.so. This will be automatically loaded by libGL.so.
-
-10.3.3 Performance and Features
-
-Software rendering will be used under any of the following conditions:
-
- o Using glDrawBuffer(GL_FRONT_AND_BACK).
-
- o Using point, line, or triangle smoothing.
-
- o Using glLogicOp.
-
- o Using glPolygonStipple or glLineStipple.
-
- o Using 1D or 3D textures.
-
- o Using texture borders.
-
- o Using glDepthFunc(GL_NEVER).
-
- o Using the accumulation buffer.
-
-The AGP mode may be set to 1, 2, or 4. One is used by default. Higher AGP
-speeds may result in unreliable performance depending on your motherboard.
-
-Compaq has funded the implementation of AGP accelerated ReadPixels and Draw-
-Pixels in this driver. With this implementation, on a G400 drawing directly
-from AGP memory (exported to the client), throughput of up to 1 GB/sec has
-been measured.
-
-Additionally Compaq's funding has produced several new extensions in Mesa,
-including one (packed_depth_stencil_MESA) which enables Read/DrawPixels func-
-tionality to operate directly on the packed 24/8 depth/stencil buffers of
-this hardware.
-
-In order to access this functionality, the application must ensure that all
-pixel processing operations are disabled. There are in addition a fairly
-complex set of rules regarding which packing/unpacking modes must be used,
-and which data formats are supported, and alignment constraints. See the
-files in lib/GL/mesa/src/drv/mga/DOCS for a summary of these. The extension
-definitions are included in the Mesa 3.4 source distribution.
-
-10.3.4 IRQ Assignment
-
-There have been problems in the past with the MGA driver being very sluggish
-when the DRI is enabled (to the point of being unusable.) This is caused by
-the graphics card not having an interrupt assigned to it. The current DRI
-trunk will attempt to detect this condition and bail out gracefully.
-
-The solution to the above problem is to assign an interrupt to your graphics
-card. This is something you must turn on in your system BIOS configuration.
-Please consult your system BIOS manual for instructions on how to enable an
-interrupt for your graphics card.
-
-10.3.5 MGA HAL lib
-
-MGAHALlib.a is a binary library Matrox has provided for use under Linux to
-expose functionality for which they can not provide documentation. (For
-example TV-Out requires MacroVision be enabled on the output.) This binary
-library also sets the pixel/memory clocks to the optimal settings for your
-Matrox card.
-
-Currently the MGAHAL library is required for the G450 to work. You can down-
-load this from the driver section on Matrox's website: www.matrox.com/mga
-
-Here modifications to the DRI build instructions which make the mga ddx
-driver use the MGAHAL library:
-
- 1.Put the following define in your host.def file
- #define UseMatroxHal YES
- 2. Place mgaHALlib.a in the following directory
- xc/programs/Xserver/hw/xfree86/drivers/mga/HALlib/
-
-You can use DualHead on the G400/G450 DH cards by creating two device sec-
-tions which both point to the same BusID. For most AGP devices the BusID
-will be "PCI:1:0:0". Configure your screen section as you would normally
-configure XFree86 4.x Multihead. It should be noted that currently the sec-
-ond head does not support direct rendering.
-
-10.3.6 Known Problems
-
-None.
-
-10.4 ATI Rage 128
-
-10.4.1 Requirements
-
-A kernel with AGP GART support (such as Linux 2.4.x) is needed.
-
-10.4.2 Configuration
-
-Your XF86Config file's device section must specify the ati device:
-
- Section "Device"
- Identifier "Rage128"
- VendorName "ATI"
- Driver "ati"
- Option "AGPMode" "1"
- Option "UseCCEFor2D" "false"
- EndSection
-
-The Screen section should then reference the Rage 128 device:
-
- Section "Screen"
- Identifier "Screen 1"
- Device "Rage128"
- Monitor "High Res Monitor"
- DefaultDepth 16
- Subsection "Display"
- Depth 16
- Modes "1280x1024" "1024x768" "800x600" "640x480"
- ViewPort 0 0
- EndSubsection
- Subsection "Display"
- Depth 32
- Modes "1280x1024" "1024x768" "800x600" "640x480"
- ViewPort 0 0
- EndSubsection
- EndSection
-
-The kernel module for the Rage 128 is named r128.o and should be installed in
-/lib/modules/2.4.x/kernel/drivers/char/drm/. It will be automatically loaded
-by the Xserver if needed.
-
-The DRI 3D driver for the Rage 128 should be in /usr/X11R6/lib/mod-
-ules/dri/r128_dri.so. This will be automatically loaded by libGL.so.
-
-You may also set your screen depth to 32 for 32bpp mode.
-
-10.4.3 Performance and Features
-
-While PCI Rage 128 based cards are supported, they do not yet support PCI
-GART, so they will not perform as well as their AGP counterparts.
-
-For AGP cards, the AGP mode may be set to 1, 2, or 4. One is used by
-default. Higher AGP speeds may result in unreliable performance depending on
-your motherboard.
-
-Note that even at 32bpp there is no alpha channel.
-
-The following OpenGL features are implemented in software and will be slow:
-
- o accumulation buffer operations
-
- o stencil, when using a 16bpp screen
-
- o Blend subtract, min/max and logic op blend modes
-
- o GL_SEPARATE_SPECULAR_COLOR lighting mode
-
- o glDrawBuffer(GL_FRONT_AND_BACK)
-
- o Using 1D or 3D textures
-
- o Using texture borders
-
-10.4.4 Known Problems
-
-If you experience stability problems you may try setting the UseCCEFor2D
-option to true. This will effectively disable 2D hardware acceleration.
-Performance will be degraded, of course.
-
-10.5 ATI Radeon
-
-10.5.1 Requirements
-
-A kernel with AGP GART support (such as Linux 2.4.x) is needed.
-
-10.5.2 Configuration
-
-Your XF86Config file's device section must specify the ati device:
-
- Section "Device"
- Identifier "Radeon"
- VendorName "ATI"
- Driver "ati"
- Option "AGPMode" "1"
- EndSection
-
-The Screen section should then reference the Radeon device:
-
- Section "Screen"
- Identifier "Screen 1"
- Device "Radeon"
- Monitor "High Res Monitor"
- DefaultDepth 16
- Subsection "Display"
- Depth 16
- Modes "1280x1024" "1024x768" "800x600" "640x480"
- ViewPort 0 0
- EndSubsection
- Subsection "Display"
- Depth 32
- Modes "1280x1024" "1024x768" "800x600" "640x480"
- ViewPort 0 0
- EndSubsection
- EndSection
-
-The kernel module for the Radeon is named radeon.o and should be installed in
-/lib/modules/2.4.x/kernel/drivers/char/drm/. It will be automatically loaded
-by the Xserver if needed.
-
-The DRI 3D driver for the Radeon should be in /usr/X11R6/lib/mod-
-ules/dri/radeon_dri.so. This will be automatically loaded by libGL.so.
-
-You may also set your screen depth to 32 for 32bpp mode.
-
-10.5.3 Performance and Features
-
-While this driver supports many of the features of ATI Radeon cards, we do
-not yet fully support the card's TCL features. This work is progressing, but
-is not yet ready.
-
-The AGP mode may be set to 1, 2, or 4. One is used by default. Higher AGP
-speeds may result in unreliable performance depending on your motherboard.
-
-The following OpenGL features are implemented in software and will be slow:
-
- o Blend subtract, blend min/max and blend logicops
-
- o Stencil and accumulation operations
-
- o 1D and 3D textures
-
- o Texture borders
-
-The GL_EXT_texture_env_combine, GL_EXT_texture_env_add and GL_EXT_tex-
-ture_env_dot3 extensions are supported (or will be soon supported in the new
-driver based on Mesa 3.5).
-
-We hope to implement support for the following features in the future:
-
- o Vertex transformation, clipping and lighting (TCL)
-
- o Hardware stencil buffer
-
- o Cube map textures
-
- o 3D textures
-
- o Three texture units
-
-10.5.4 Known Problems
-
-Certain (early?) revisions of the AMD Irongate chipset have AGPGART problems
-which effect Radeon, and other graphics cards. The card may work unreliably,
-or not work at all. If the DRM kernel module is not loaded, the 2D Xserver
-may work. There's hope that this can be fixed in the future.
-
-10.6 3DLabs Oxygen GMX 2000
-
-The driver for this hardware was experimental and is no longer being devel-
-oped or supported.
-
-11. General Limitations and Known Bugs
-
-11.1 OpenGL
-
-The following OpenGL features are not supported at this time: overlays,
-stereo, hardware-accelerated indirect rendering.
-
-OpenGL-like functionality is provided with the Mesa library. XFree86 4.1.0
-uses Mesa 3.4.2. Subsequent releases of XFree86 will use newer versions of
-Mesa. When newer versions of Mesa are available, the 3D drivers can be
-updated without reinstalling XFree86 or libGL.so.
-
-11.2 GLX
-
-The GLX 1.3 API is exported but none of the new 1.3 functions are opera-
-tional.
-
-The new glXGetProcAddressARB function is fully supported.
-
-GLXPixmap rendering is only supported for indirect rendering contexts. This
-is a common OpenGL limitation. Attempting to use a direct rendering context
-with a GLXPixmap will result in an X protocol error.
-
-11.3 Debugging
-
-Debugging DRI drivers with gdb can be difficult because of the locking
-involved. When debugging OpenGL applications, you should avoid stepping
-inside the GL functions. If you're trying to debug a DRI driver it's recom-
-mended that you do so remotely, from a second system.
-
-11.4 Scheduling
-
-When you run multiple GL applications at once you may notice poor time slic-
-ing. This is due to an interaction problem with the Linux scheduler which
-will be addressed in the future.
-
-11.5 libGL.so and dlopen()
-
-A number of popular OpenGL applications on Linux (such as Quake3, HereticII,
-Heavy Gear 2, etc) dynamically open the libGL.so library at runtime with
-dlopen(), rather than linking with -lGL at compile/link time.
-
-If dynamic loading of libGL.so is not implemented carefully, there can be a
-number of serious problems. Here are the things to be careful of in your
-application:
-
- o Specify the RTLD_GLOBAL flag to dlopen(). If you don't do this then
- you'll likely see a runtime error message complaining that _glapi_Con-
- text is undefined when libGL.so tries to open a hardware-specific
- driver. Without this flag, nested opening of dynamic libraries does not
- work.
-
- o Do not close the library with dlclose() until after XCloseDisplay() has
- been called. When libGL.so initializes itself it registers several
- callbacks functions with Xlib. When XCloseDisplay() is called those
- callback functions are called. If libGL.so has already been unloaded
- with dlclose() this will cause a segmentation fault.
-
- o Your application should link with -lpthread. On Linux, libGL.so uses
- the pthreads library in order to provide thread safety. There is appar-
- ently a bug in the dlopen()/dlclose() code which causes crashes if the
- library uses pthreads but the parent application doesn't. The only
- known work-around is to link the application with -lpthread.
-
-Some applications don't yet incorporate these procedures and may fail. For
-example, changing the graphics settings in some video games will expose this
-problem. The DRI developers are working with game vendors to prevent this
-problem in the future.
-
-11.6 Bug Database
-
-The DRI bug database which includes bugs related to specific drivers is at
-the SourceForge DRI Bug Database
-
-Please scan both the open and closed bug lists to determine if your problem
-has already been reported and perhaps fixed.
-
-12. Resources
-
-12.1 Software
-
-A collection of useful configuration files, libraries, headers, utilities and
-demo programs is available from http://dri.sourceforge.net/res.phtml
-
-12.2 Documentation
-
- o General OpenGL information is available at the OpenGL Home Page
-
- o XFree86 information is available at the XFree86 Home Page
-
- o Information about the design of the DRI is available from Precision
- Insight, Inc.
-
- o Visit the DRI project on SourceForge.net for the latest development news
- about the DRI and 3D drivers.
-
- o The DRI Compilation Guide explains how to download, compile and install
- the DRI for yourself.
-
-12.3 Support
-
- o The DRI-users mailing list at SourceForge is a forum for people to dis-
- cuss DRI problems.
-
- o In the future there may be IHV and Linux vendor support resources for
- the DRI.
-
- Generated from XFree86: xc/programs/Xserver/hw/xfree86/doc/sgml/DRI.sgml,v 1.28 dawes Exp $
-
-