diff options
Diffstat (limited to 'xorg-server/hw/xfree86/doc/Registry')
| -rw-r--r-- | xorg-server/hw/xfree86/doc/Registry | 409 |
1 files changed, 409 insertions, 0 deletions
diff --git a/xorg-server/hw/xfree86/doc/Registry b/xorg-server/hw/xfree86/doc/Registry new file mode 100644 index 000000000..89a5f10fa --- /dev/null +++ b/xorg-server/hw/xfree86/doc/Registry @@ -0,0 +1,409 @@ +This is the XFree86 driver/module registry. To avoid name space clashes and
+to maintain some consistency between drivers the important name spaces are
+maintained here.
+
+1. Module Names.
+
+Each module is required to have a unique name. Registered names are:
+
+GLcore
+acecad
+afb
+apm
+ark
+ati
+atimisc
+bitmap
+bt8xx
+calcomp
+cfb
+cfb16
+cfb24
+cfb32
+chips
+cirrus
+citron
+cyrix
+dbe
+ddc
+digitaledge
+dmc
+dri
+drm
+dynapro
+elo2300
+elographics
+extmod
+fb
+fbdev
+fbdevhw
+fi12x6
+freetype
+glide
+glint
+glx
+hyperpen
+i128
+i2c
+i740
+i810
+imstt
+int10
+joystick
+keyboard
+layer
+magellan
+magictouch
+mfb
+mga
+microtouch
+mouse
+msp34xx
+mutouch
+neomagic
+newport
+nv
+pcidata
+penmount
+pex5
+r128
+radeon
+rac
+ramdac
+record
+rendition
+s3
+s3virge
+savage
+shadow
+shadowfb
+siliconmotion
+sis
+spaceorb
+speedo
+summa
+sunbw2
+suncg14
+suncg3
+suncg6
+sunffb
+sunleo
+suntcx
+tdfx
+tga
+trident
+tseng
+type1
+v4l
+vbe
+vesa
+vga
+vgahw
+vmware
+void
+wacom
+xaa
+xf1bpp
+xf24_32bpp
+xf4bpp
+xf8_16bpp
+xf8_32bpp
+xf8_32wid
+xie
+xtrap
+xtt
+
+2. External Module Object Symbols.
+
+Each module is required to use a unique prefix or prefixes for all of
+its externally visible symbols. They should be unique without regard to
+case. Registered prefixes are:
+
+ati
+bt8xx
+cfb
+chips
+fi12x6
+glide
+glint
+mfb
+mga
+msp34xx
+neo
+permedia
+tseng
+vga
+vgahw
+vmware
+xaa
+xf1bpp
+xf4bpp
+
+3. Chipset Names.
+
+Each video driver is required to use a unique set of chipset names. Case,
+white space and underscore characters are ignored when comparing chipset
+names. All names listed here are in lower case with all white space and
+underscores removed. Registered chipset names are:
+
+ati
+ativga
+ct64200
+ct64300
+ct65520
+ct65525
+ct65530
+ct65535
+ct65540
+ct65545
+ct65546
+ct65548
+ct65550
+ct65554
+ct65555
+ct68554
+ct69000
+et4000
+et4000w32
+et4000w32i
+et4000w32p
+et6000
+et6100
+generic
+ibmvga
+ibm8514
+mach32
+mach64
+mach8
+mga2064w
+mga1064sg
+mga2164w
+mga2164wagp
+neo2070
+neo2090
+neo2093
+neo2097
+neo2160
+neo2200
+tipm2
+vgawonder
+voodoo
+
+4. Option Names.
+
+Option names and their usage should be consistent between drivers.
+Case, white space and underscore characters are ignored when comparing
+option names. The prefix "no" may be added or removed from boolean
+option names. All names listed here are in their preferred user-visible
+form. Some registered option names are:
+
+Types are: B = boolean, O = set/unset (no value), I = integer, S = string,
+ A = optional string, F = floating point number Q = frequency
+
+Scopes are: F = global flags, V = video driver, C = common (per screen),
+ I = input drivers, X = XAA, Xv = Xv extension, M = misc.
+
+Names currently in use:
+
+Name Type Scope Description
+----------------------------------------------------------------------------
+AllowMouseOpenFail B F ignore mouse dev open failure
+AllowNonLocalModInDev B F allow non-local mod of input devs
+AllowNonLocalXvidtune B F allow non-local VidMode connections
+BlankTime I F Screen saver timeout (min)
+DisableModInDev B F disallow changing input devs
+DisableVidModeExtension B F disable VidMode extension
+DontVTSwitch B F disable Ctrl-Alt-Fn
+DontZap B F disable Ctrl-Alt-BS sequence
+DontZoom B F disable Ctrl-Alt-+/-
+NoTrapSignals B F don't trap signals
+OffTime I F Time before DPMS off mode active (min)
+PciProbe1 O F use PCI probe algorithm 1
+PciProbe2 O F use PCI probe algorithm 2
+PciForceConfig1 O F force PCI config type 1
+PciForceConfig2 O F force PCI config type 2
+Pixmap I F depth 24 pixmap size (24 or 32)
+StandbyTime I F Time before DPMS standby active (min)
+SuspendTime I F Time before DPMS suspend mode active (min)
+
+BackingStore B C Enable backing store
+DDC B C Enable/disable DDC
+DDC1 B C Enable/disable DDC1
+DDC2 B C Enable/disable DDC2
+DPMS O C Enable DPMS
+MTRR B C Enable/disable setting MTRRs
+
+BaudRate I I Serial port baud rate
+ButtonNumber I I Button number (for touch screen?)
+ButtonThreshold I I ??
+ClearDTR O I Clear serial port DTR
+ClearRTS O I Clear serial port RTS
+DataBits I I Serial port data bits
+DemandLoad O I ??
+Device S I Device file name
+DeviceName S I Input device name
+FlowControl S I Serial flow control ("xon", "none")
+Floating B I Device initialised as floating
+HistorySize I I ??
+MaxX I I Maximum X coordinate
+MaxY I I Maximum Y coordinate
+MinX I I Minimum X coordinate
+MinY I I Minimum Y coordinate
+Parity S I Serial port parity ("odd", "even", "none")
+ReportDelay I I ??
+ReportingMode S I may be "raw" or "scaled"
+ScreenNumber I I Screen number (for touch screen)
+SendCoreEvents B I Send core events
+StopBits I I Serial port stop bits
+SwapXY B I Swap the X and Y axes
+UntouchDelay I I ??
+Vmin I I Tty VMIN
+Vtime I I Tty VTIME
+
+
+18BitBus B V ??
+8Plus16 B V Enable depth 8 + depth 16 with overlay
+8Plus24 B V Enable depth 8 + depth 24 with overlay
+BlockWrite B V Enable/disable block write
+ColorKey I V Set the color key for overlay modes
+CompositeSync B V Composite sync
+CRTDisplay B V Force display on CRT, not LCD
+CRTScreen B V Display on CRT, not LCD (Obsolete)
+EarlyRasPrecharge O V Early RAS pre-charge
+FastDRAM O V Fast DRAM
+FifoAggressive O V Aggressive FIFO setting
+FifoConservative O V Conservative FIFO setting
+FifoModerate O V Moderate FIFO setting
+FireGL3000 B V Card is Diamond FireGL3000
+FixPanelSize B V ??
+FPClock8 Q V Flat panel clock for 8bpp fb (MHz)
+FPClock16 Q V Flat panel clock for 16bpp fb (MHz)
+FPClock24 Q V Flat panel clock for 24bpp fb (MHz)
+FPClock32 Q V Flat panel clock for 32bpp fb (MHz)
+FPMVRAM O V Fast page mode VRAM
+FramebufferWC B V Enable/disable WC for the framebuffer
+GlideDevice I V Selects which Voodoo board to use
+HiBitHigh O V High clock bit default to set
+HiBitLow O V High clock bit default to cleared
+HWClocks B V Enable/disable HW clocks
+HWCursor B V Enable/disable HW cursor
+LateRasPrecharge O V Late RAS pre-charge
+Legend O V Card is Legend ET4000
+LCDCenter B V Enable/disable centering for LCD displays
+Linear B V Enable/disable linear framebuffer
+MCLK Q V Specify the current MCLK value (MHz)
+MedDRAM B V Medium speed DRAM
+MemCfg1 I V ??
+MemCfg2 I V ??
+MGASDRAM B V Mga card has SDRAM
+MMIO B V Enable/disable memory mapped I/O
+MMIOCache B V Enable/Disable MMIO cache
+MuxThreshold I V Multiplexing threshold (kHz)
+NoAccel B V Disable/enable acceleration
+NoClockChip B V ??
+NoStretch B V Disable/enable stretching for LCD displays
+OnAtExit B V Leave video signal on when exiting server
+OverclockMem B V Enable memory overclocking
+Overlay A V Enable multi-depth/overlay. An optional
+ string "M,N" may be specified, where
+ M, N are the depths.
+PanelDisplay B V Force display on LCD
+PciBurst B V Enable/disable PCI burst mode
+PciRetry B V Enable/disable PCI retries
+ProbeClocks B V Force probe for non-programmable clocks
+ReferenceClock Q V Clock generator reference frequency
+RGBbits I V Number of significant bits per rgb
+Rotate S V Rotate the virtual display (CW or CCW)
+SetLCDClk Q V Set LCD clock (MHz)
+SetMclk Q V Set Memory Clock (MHz)
+ShadowFB B V Enable shadow framebuffer layer
+ShowCache B V Enable viewing of offscreen memory
+ShowOverscan O V Set the overscan area to a visible colour
+SlowDRAM O V Slow DRAM
+SlowEDODRAM O V Slow EDO DRAM
+STN B V STN screen type (??)
+SWCursor B V Enable/disable SW cursor
+SuspendHack B V ??
+SyncOnGreen B V Enable/disable sync on green
+TurboQueue B V Enable/disable turbo queue
+UseFBDev B V Use the fbdev driver interface
+UseModeLine B V Use Modeline (??)
+W32Interleave B V ??
+
+Buffers I Xv Number of buffers
+Device S Xv Device file name
+Expose B Xv Disable occlusion clipping (see DESIGN)
+FramesPerSec I Xv Max. refresh frequency
+
+XAA options. All are of type "O" and scope "X", and are self-explanatory
+
+XaaNoColor8x8PatternFillRect
+XaaNoColor8x8PatternFillTrap
+XaaNoCPUToScreenColorExpandFill
+XaaNoDashedBresenhamLine
+XaaNoDashedTwoPointLine
+XaaNoScreenToScreenCopy
+XaaNoImageReadRect
+XaaNoImageWriteRect
+XaaNoMono8x8PatternFillRect
+XaaNoMono8x8PatternFillTrap
+XaaNoOffscreenPixmaps
+XaaNoPixmapCache
+XaaNoScanlineCPUToScreenColorExpandFill
+XaaNoScanlineImageWriteRect
+XaaNoScreenToScreenColorExpandFill
+XaaNoSolidBresenhamLine
+XaaNoSolidFillRect
+XaaNoSolidFillTrap
+XaaNoSolidHorVertLine
+XaaNoSolidTwoPointLine
+
+
+Names used in previous versions:
+
+16Clocks
+8Clocks
+ClkDiv2
+EDO VRAM
+ExternDisp
+ExtFramBuf
+FastVRAM
+FavorBitBlt
+InternDisp
+NoBitBlt
+NoFontCache
+NoImageBlt
+NoMemAccess
+NoPciDisconnect
+NoPixmapCache
+NoProgramClocks
+NoSplitXfer
+OverrideBIOS
+OverrideValidateMode
+ProgLcdModeRegs
+ProgLcdModeStretch
+SlowDRAMrefresh
+SlowVRAM
+SwapHiBit
+
+
+5. Ramdac Names.
+
+Ramdac names should be consistent between drivers. Case, white space
+and underscore characters are ignored when comparing ramdac names. All
+names listed here are in lower case with all white space and underscores
+removed.
+
+
+6. Clock Chip Names.
+
+Clock chip names should be consistent between drivers. Case, white
+space and underscore characters are ignored when comparing clock chip
+names. All names listed here are in lower case with all white space
+and underscores removed.
+
+
+
+
+
+$XFree86: xc/programs/Xserver/hw/xfree86/Registry,v 1.18 2002/04/06 18:31:09 tsi Exp $
|