diff options
Diffstat (limited to 'xorg-server/hw/xfree86/doc')
| -rw-r--r-- | xorg-server/hw/xfree86/doc/devel/Registry | 817 | ||||
| -rw-r--r-- | xorg-server/hw/xfree86/doc/man/xorg.conf.man.pre | 12 |
2 files changed, 408 insertions, 421 deletions
diff --git a/xorg-server/hw/xfree86/doc/devel/Registry b/xorg-server/hw/xfree86/doc/devel/Registry index 1fec230e8..613b50c7b 100644 --- a/xorg-server/hw/xfree86/doc/devel/Registry +++ b/xorg-server/hw/xfree86/doc/devel/Registry @@ -1,409 +1,408 @@ -This is the XFree86 driver/module registry. To avoid name space clashes and -to maintain some consistency between drivers the important name spaces are -maintained here. - -1. Module Names. - -Each module is required to have a unique name. Registered names are: - -GLcore -acecad -afb -apm -ark -ati -atimisc -bitmap -bt8xx -calcomp -cfb -cfb16 -cfb24 -cfb32 -chips -cirrus -citron -cyrix -dbe -ddc -digitaledge -dmc -dri -drm -dynapro -elo2300 -elographics -extmod -fb -fbdev -fbdevhw -fi12x6 -freetype -glide -glint -glx -hyperpen -i128 -i2c -i740 -i810 -imstt -int10 -joystick -keyboard -layer -magellan -magictouch -mfb -mga -microtouch -mouse -msp34xx -mutouch -neomagic -newport -nv -pcidata -penmount -pex5 -r128 -radeon -rac -ramdac -record -rendition -s3 -s3virge -savage -shadow -shadowfb -siliconmotion -sis -spaceorb -speedo -summa -sunbw2 -suncg14 -suncg3 -suncg6 -sunffb -sunleo -suntcx -tdfx -tga -trident -tseng -type1 -v4l -vbe -vesa -vga -vgahw -vmware -void -wacom -xaa -xf1bpp -xf24_32bpp -xf4bpp -xf8_16bpp -xf8_32bpp -xf8_32wid -xie -xtrap -xtt - -2. External Module Object Symbols. - -Each module is required to use a unique prefix or prefixes for all of -its externally visible symbols. They should be unique without regard to -case. Registered prefixes are: - -ati -bt8xx -cfb -chips -fi12x6 -glide -glint -mfb -mga -msp34xx -neo -permedia -tseng -vga -vgahw -vmware -xaa -xf1bpp -xf4bpp - -3. Chipset Names. - -Each video driver is required to use a unique set of chipset names. Case, -white space and underscore characters are ignored when comparing chipset -names. All names listed here are in lower case with all white space and -underscores removed. Registered chipset names are: - -ati -ativga -ct64200 -ct64300 -ct65520 -ct65525 -ct65530 -ct65535 -ct65540 -ct65545 -ct65546 -ct65548 -ct65550 -ct65554 -ct65555 -ct68554 -ct69000 -et4000 -et4000w32 -et4000w32i -et4000w32p -et6000 -et6100 -generic -ibmvga -ibm8514 -mach32 -mach64 -mach8 -mga2064w -mga1064sg -mga2164w -mga2164wagp -neo2070 -neo2090 -neo2093 -neo2097 -neo2160 -neo2200 -tipm2 -vgawonder -voodoo - -4. Option Names. - -Option names and their usage should be consistent between drivers. -Case, white space and underscore characters are ignored when comparing -option names. The prefix "no" may be added or removed from boolean -option names. All names listed here are in their preferred user-visible -form. Some registered option names are: - -Types are: B = boolean, O = set/unset (no value), I = integer, S = string, - A = optional string, F = floating point number Q = frequency - -Scopes are: F = global flags, V = video driver, C = common (per screen), - I = input drivers, X = XAA, Xv = Xv extension, M = misc. - -Names currently in use: - -Name Type Scope Description ----------------------------------------------------------------------------- -AllowMouseOpenFail B F ignore mouse dev open failure -AllowNonLocalModInDev B F allow non-local mod of input devs -AllowNonLocalXvidtune B F allow non-local VidMode connections -BlankTime I F Screen saver timeout (min) -DisableModInDev B F disallow changing input devs -DisableVidModeExtension B F disable VidMode extension -DontVTSwitch B F disable Ctrl-Alt-Fn -DontZap B F disable Ctrl-Alt-BS sequence -DontZoom B F disable Ctrl-Alt-+/- -NoTrapSignals B F don't trap signals -OffTime I F Time before DPMS off mode active (min) -PciProbe1 O F use PCI probe algorithm 1 -PciProbe2 O F use PCI probe algorithm 2 -PciForceConfig1 O F force PCI config type 1 -PciForceConfig2 O F force PCI config type 2 -Pixmap I F depth 24 pixmap size (24 or 32) -StandbyTime I F Time before DPMS standby active (min) -SuspendTime I F Time before DPMS suspend mode active (min) - -BackingStore B C Enable backing store -DDC B C Enable/disable DDC -DDC1 B C Enable/disable DDC1 -DDC2 B C Enable/disable DDC2 -DPMS O C Enable DPMS -MTRR B C Enable/disable setting MTRRs - -BaudRate I I Serial port baud rate -ButtonNumber I I Button number (for touch screen?) -ButtonThreshold I I ?? -ClearDTR O I Clear serial port DTR -ClearRTS O I Clear serial port RTS -DataBits I I Serial port data bits -DemandLoad O I ?? -Device S I Device file name -DeviceName S I Input device name -FlowControl S I Serial flow control ("xon", "none") -HistorySize I I ?? -MaxX I I Maximum X coordinate -MaxY I I Maximum Y coordinate -MinX I I Minimum X coordinate -MinY I I Minimum Y coordinate -Parity S I Serial port parity ("odd", "even", "none") -ReportDelay I I ?? -ReportingMode S I may be "raw" or "scaled" -ScreenNumber I I Screen number (for touch screen) -SendCoreEvents B I Send core events -SendDragEvents B I Send drag events -StopBits I I Serial port stop bits -SwapXY B I Swap the X and Y axes -UntouchDelay I I ?? -Vmin I I Tty VMIN -Vtime I I Tty VTIME - - -18BitBus B V ?? -8Plus16 B V Enable depth 8 + depth 16 with overlay -8Plus24 B V Enable depth 8 + depth 24 with overlay -BlockWrite B V Enable/disable block write -ColorKey I V Set the color key for overlay modes -CompositeSync B V Composite sync -CRTDisplay B V Force display on CRT, not LCD -CRTScreen B V Display on CRT, not LCD (Obsolete) -EarlyRasPrecharge O V Early RAS pre-charge -FastDRAM O V Fast DRAM -FifoAggressive O V Aggressive FIFO setting -FifoConservative O V Conservative FIFO setting -FifoModerate O V Moderate FIFO setting -FireGL3000 B V Card is Diamond FireGL3000 -FixPanelSize B V ?? -FPClock8 Q V Flat panel clock for 8bpp fb (MHz) -FPClock16 Q V Flat panel clock for 16bpp fb (MHz) -FPClock24 Q V Flat panel clock for 24bpp fb (MHz) -FPClock32 Q V Flat panel clock for 32bpp fb (MHz) -FPMVRAM O V Fast page mode VRAM -FramebufferWC B V Enable/disable WC for the framebuffer -GlideDevice I V Selects which Voodoo board to use -HiBitHigh O V High clock bit default to set -HiBitLow O V High clock bit default to cleared -HWClocks B V Enable/disable HW clocks -HWCursor B V Enable/disable HW cursor -LateRasPrecharge O V Late RAS pre-charge -Legend O V Card is Legend ET4000 -LCDCenter B V Enable/disable centering for LCD displays -Linear B V Enable/disable linear framebuffer -MCLK Q V Specify the current MCLK value (MHz) -MedDRAM B V Medium speed DRAM -MemCfg1 I V ?? -MemCfg2 I V ?? -MGASDRAM B V Mga card has SDRAM -MMIO B V Enable/disable memory mapped I/O -MMIOCache B V Enable/Disable MMIO cache -MuxThreshold I V Multiplexing threshold (kHz) -NoAccel B V Disable/enable acceleration -NoClockChip B V ?? -NoStretch B V Disable/enable stretching for LCD displays -OnAtExit B V Leave video signal on when exiting server -OverclockMem B V Enable memory overclocking -Overlay A V Enable multi-depth/overlay. An optional - string "M,N" may be specified, where - M, N are the depths. -PanelDisplay B V Force display on LCD -PciBurst B V Enable/disable PCI burst mode -PciRetry B V Enable/disable PCI retries -ProbeClocks B V Force probe for non-programmable clocks -ReferenceClock Q V Clock generator reference frequency -RGBbits I V Number of significant bits per rgb -Rotate S V Rotate the virtual display (CW or CCW) -SetLCDClk Q V Set LCD clock (MHz) -SetMclk Q V Set Memory Clock (MHz) -ShadowFB B V Enable shadow framebuffer layer -ShowCache B V Enable viewing of offscreen memory -ShowOverscan O V Set the overscan area to a visible colour -SlowDRAM O V Slow DRAM -SlowEDODRAM O V Slow EDO DRAM -STN B V STN screen type (??) -SWCursor B V Enable/disable SW cursor -SuspendHack B V ?? -SyncOnGreen B V Enable/disable sync on green -TurboQueue B V Enable/disable turbo queue -UseFBDev B V Use the fbdev driver interface -UseModeLine B V Use Modeline (??) -W32Interleave B V ?? - -Buffers I Xv Number of buffers -Device S Xv Device file name -Expose B Xv Disable occlusion clipping (see DESIGN) -FramesPerSec I Xv Max. refresh frequency - -XAA options. All are of type "O" and scope "X", and are self-explanatory - -XaaNoColor8x8PatternFillRect -XaaNoColor8x8PatternFillTrap -XaaNoCPUToScreenColorExpandFill -XaaNoDashedBresenhamLine -XaaNoDashedTwoPointLine -XaaNoScreenToScreenCopy -XaaNoImageReadRect -XaaNoImageWriteRect -XaaNoMono8x8PatternFillRect -XaaNoMono8x8PatternFillTrap -XaaNoOffscreenPixmaps -XaaNoPixmapCache -XaaNoScanlineCPUToScreenColorExpandFill -XaaNoScanlineImageWriteRect -XaaNoScreenToScreenColorExpandFill -XaaNoSolidBresenhamLine -XaaNoSolidFillRect -XaaNoSolidFillTrap -XaaNoSolidHorVertLine -XaaNoSolidTwoPointLine - - -Names used in previous versions: - -16Clocks -8Clocks -ClkDiv2 -EDO VRAM -ExternDisp -ExtFramBuf -FastVRAM -FavorBitBlt -InternDisp -NoBitBlt -NoFontCache -NoImageBlt -NoMemAccess -NoPciDisconnect -NoPixmapCache -NoProgramClocks -NoSplitXfer -OverrideBIOS -OverrideValidateMode -ProgLcdModeRegs -ProgLcdModeStretch -SlowDRAMrefresh -SlowVRAM -SwapHiBit - - -5. Ramdac Names. - -Ramdac names should be consistent between drivers. Case, white space -and underscore characters are ignored when comparing ramdac names. All -names listed here are in lower case with all white space and underscores -removed. - - -6. Clock Chip Names. - -Clock chip names should be consistent between drivers. Case, white -space and underscore characters are ignored when comparing clock chip -names. All names listed here are in lower case with all white space -and underscores removed. - - - - - -$XFree86: xc/programs/Xserver/hw/xfree86/Registry,v 1.18 2002/04/06 18:31:09 tsi Exp $ +This is the XFree86 driver/module registry. To avoid name space clashes and
+to maintain some consistency between drivers the important name spaces are
+maintained here.
+
+1. Module Names.
+
+Each module is required to have a unique name. Registered names are:
+
+GLcore
+acecad
+afb
+apm
+ark
+ati
+atimisc
+bitmap
+bt8xx
+calcomp
+cfb
+cfb16
+cfb24
+cfb32
+chips
+cirrus
+citron
+cyrix
+dbe
+ddc
+digitaledge
+dmc
+dri
+drm
+dynapro
+elo2300
+elographics
+extmod
+fb
+fbdev
+fbdevhw
+fi12x6
+freetype
+glide
+glint
+glx
+hyperpen
+i128
+i2c
+i740
+i810
+imstt
+int10
+joystick
+keyboard
+layer
+magellan
+magictouch
+mfb
+mga
+microtouch
+mouse
+msp34xx
+mutouch
+neomagic
+newport
+nv
+pcidata
+penmount
+pex5
+r128
+radeon
+rac
+ramdac
+record
+rendition
+s3
+s3virge
+savage
+shadow
+shadowfb
+siliconmotion
+sis
+spaceorb
+speedo
+summa
+sunbw2
+suncg14
+suncg3
+suncg6
+sunffb
+sunleo
+suntcx
+tdfx
+tga
+trident
+tseng
+type1
+v4l
+vbe
+vesa
+vga
+vgahw
+vmware
+void
+wacom
+xaa
+xf1bpp
+xf24_32bpp
+xf4bpp
+xf8_16bpp
+xf8_32bpp
+xf8_32wid
+xie
+xtrap
+xtt
+
+2. External Module Object Symbols.
+
+Each module is required to use a unique prefix or prefixes for all of
+its externally visible symbols. They should be unique without regard to
+case. Registered prefixes are:
+
+ati
+bt8xx
+cfb
+chips
+fi12x6
+glide
+glint
+mfb
+mga
+msp34xx
+neo
+permedia
+tseng
+vga
+vgahw
+vmware
+xaa
+xf1bpp
+xf4bpp
+
+3. Chipset Names.
+
+Each video driver is required to use a unique set of chipset names. Case,
+white space and underscore characters are ignored when comparing chipset
+names. All names listed here are in lower case with all white space and
+underscores removed. Registered chipset names are:
+
+ati
+ativga
+ct64200
+ct64300
+ct65520
+ct65525
+ct65530
+ct65535
+ct65540
+ct65545
+ct65546
+ct65548
+ct65550
+ct65554
+ct65555
+ct68554
+ct69000
+et4000
+et4000w32
+et4000w32i
+et4000w32p
+et6000
+et6100
+generic
+ibmvga
+ibm8514
+mach32
+mach64
+mach8
+mga2064w
+mga1064sg
+mga2164w
+mga2164wagp
+neo2070
+neo2090
+neo2093
+neo2097
+neo2160
+neo2200
+tipm2
+vgawonder
+voodoo
+
+4. Option Names.
+
+Option names and their usage should be consistent between drivers.
+Case, white space and underscore characters are ignored when comparing
+option names. The prefix "no" may be added or removed from boolean
+option names. All names listed here are in their preferred user-visible
+form. Some registered option names are:
+
+Types are: B = boolean, O = set/unset (no value), I = integer, S = string,
+ A = optional string, F = floating point number Q = frequency
+
+Scopes are: F = global flags, V = video driver, C = common (per screen),
+ I = input drivers, X = XAA, Xv = Xv extension, M = misc.
+
+Names currently in use:
+
+Name Type Scope Description
+----------------------------------------------------------------------------
+AllowMouseOpenFail B F ignore mouse dev open failure
+AllowNonLocalModInDev B F allow non-local mod of input devs
+AllowNonLocalXvidtune B F allow non-local VidMode connections
+BlankTime I F Screen saver timeout (min)
+DisableModInDev B F disallow changing input devs
+DisableVidModeExtension B F disable VidMode extension
+DontVTSwitch B F disable Ctrl-Alt-Fn
+DontZap B F disable Ctrl-Alt-BS sequence
+DontZoom B F disable Ctrl-Alt-+/-
+NoTrapSignals B F don't trap signals
+OffTime I F Time before DPMS off mode active (min)
+PciProbe1 O F use PCI probe algorithm 1
+PciProbe2 O F use PCI probe algorithm 2
+PciForceConfig1 O F force PCI config type 1
+PciForceConfig2 O F force PCI config type 2
+Pixmap I F depth 24 pixmap size (24 or 32)
+StandbyTime I F Time before DPMS standby active (min)
+SuspendTime I F Time before DPMS suspend mode active (min)
+
+BackingStore B C Enable backing store
+DDC B C Enable/disable DDC
+DDC1 B C Enable/disable DDC1
+DDC2 B C Enable/disable DDC2
+DPMS O C Enable DPMS
+MTRR B C Enable/disable setting MTRRs
+
+BaudRate I I Serial port baud rate
+ButtonNumber I I Button number (for touch screen?)
+ButtonThreshold I I ??
+ClearDTR O I Clear serial port DTR
+ClearRTS O I Clear serial port RTS
+DataBits I I Serial port data bits
+DemandLoad O I ??
+Device S I Device file name
+DeviceName S I Input device name
+FlowControl S I Serial flow control ("xon", "none")
+HistorySize I I ??
+MaxX I I Maximum X coordinate
+MaxY I I Maximum Y coordinate
+MinX I I Minimum X coordinate
+MinY I I Minimum Y coordinate
+Parity S I Serial port parity ("odd", "even", "none")
+ReportDelay I I ??
+ReportingMode S I may be "raw" or "scaled"
+ScreenNumber I I Screen number (for touch screen)
+SendCoreEvents B I Send core events
+StopBits I I Serial port stop bits
+SwapXY B I Swap the X and Y axes
+UntouchDelay I I ??
+Vmin I I Tty VMIN
+Vtime I I Tty VTIME
+
+
+18BitBus B V ??
+8Plus16 B V Enable depth 8 + depth 16 with overlay
+8Plus24 B V Enable depth 8 + depth 24 with overlay
+BlockWrite B V Enable/disable block write
+ColorKey I V Set the color key for overlay modes
+CompositeSync B V Composite sync
+CRTDisplay B V Force display on CRT, not LCD
+CRTScreen B V Display on CRT, not LCD (Obsolete)
+EarlyRasPrecharge O V Early RAS pre-charge
+FastDRAM O V Fast DRAM
+FifoAggressive O V Aggressive FIFO setting
+FifoConservative O V Conservative FIFO setting
+FifoModerate O V Moderate FIFO setting
+FireGL3000 B V Card is Diamond FireGL3000
+FixPanelSize B V ??
+FPClock8 Q V Flat panel clock for 8bpp fb (MHz)
+FPClock16 Q V Flat panel clock for 16bpp fb (MHz)
+FPClock24 Q V Flat panel clock for 24bpp fb (MHz)
+FPClock32 Q V Flat panel clock for 32bpp fb (MHz)
+FPMVRAM O V Fast page mode VRAM
+FramebufferWC B V Enable/disable WC for the framebuffer
+GlideDevice I V Selects which Voodoo board to use
+HiBitHigh O V High clock bit default to set
+HiBitLow O V High clock bit default to cleared
+HWClocks B V Enable/disable HW clocks
+HWCursor B V Enable/disable HW cursor
+LateRasPrecharge O V Late RAS pre-charge
+Legend O V Card is Legend ET4000
+LCDCenter B V Enable/disable centering for LCD displays
+Linear B V Enable/disable linear framebuffer
+MCLK Q V Specify the current MCLK value (MHz)
+MedDRAM B V Medium speed DRAM
+MemCfg1 I V ??
+MemCfg2 I V ??
+MGASDRAM B V Mga card has SDRAM
+MMIO B V Enable/disable memory mapped I/O
+MMIOCache B V Enable/Disable MMIO cache
+MuxThreshold I V Multiplexing threshold (kHz)
+NoAccel B V Disable/enable acceleration
+NoClockChip B V ??
+NoStretch B V Disable/enable stretching for LCD displays
+OnAtExit B V Leave video signal on when exiting server
+OverclockMem B V Enable memory overclocking
+Overlay A V Enable multi-depth/overlay. An optional
+ string "M,N" may be specified, where
+ M, N are the depths.
+PanelDisplay B V Force display on LCD
+PciBurst B V Enable/disable PCI burst mode
+PciRetry B V Enable/disable PCI retries
+ProbeClocks B V Force probe for non-programmable clocks
+ReferenceClock Q V Clock generator reference frequency
+RGBbits I V Number of significant bits per rgb
+Rotate S V Rotate the virtual display (CW or CCW)
+SetLCDClk Q V Set LCD clock (MHz)
+SetMclk Q V Set Memory Clock (MHz)
+ShadowFB B V Enable shadow framebuffer layer
+ShowCache B V Enable viewing of offscreen memory
+ShowOverscan O V Set the overscan area to a visible colour
+SlowDRAM O V Slow DRAM
+SlowEDODRAM O V Slow EDO DRAM
+STN B V STN screen type (??)
+SWCursor B V Enable/disable SW cursor
+SuspendHack B V ??
+SyncOnGreen B V Enable/disable sync on green
+TurboQueue B V Enable/disable turbo queue
+UseFBDev B V Use the fbdev driver interface
+UseModeLine B V Use Modeline (??)
+W32Interleave B V ??
+
+Buffers I Xv Number of buffers
+Device S Xv Device file name
+Expose B Xv Disable occlusion clipping (see DESIGN)
+FramesPerSec I Xv Max. refresh frequency
+
+XAA options. All are of type "O" and scope "X", and are self-explanatory
+
+XaaNoColor8x8PatternFillRect
+XaaNoColor8x8PatternFillTrap
+XaaNoCPUToScreenColorExpandFill
+XaaNoDashedBresenhamLine
+XaaNoDashedTwoPointLine
+XaaNoScreenToScreenCopy
+XaaNoImageReadRect
+XaaNoImageWriteRect
+XaaNoMono8x8PatternFillRect
+XaaNoMono8x8PatternFillTrap
+XaaNoOffscreenPixmaps
+XaaNoPixmapCache
+XaaNoScanlineCPUToScreenColorExpandFill
+XaaNoScanlineImageWriteRect
+XaaNoScreenToScreenColorExpandFill
+XaaNoSolidBresenhamLine
+XaaNoSolidFillRect
+XaaNoSolidFillTrap
+XaaNoSolidHorVertLine
+XaaNoSolidTwoPointLine
+
+
+Names used in previous versions:
+
+16Clocks
+8Clocks
+ClkDiv2
+EDO VRAM
+ExternDisp
+ExtFramBuf
+FastVRAM
+FavorBitBlt
+InternDisp
+NoBitBlt
+NoFontCache
+NoImageBlt
+NoMemAccess
+NoPciDisconnect
+NoPixmapCache
+NoProgramClocks
+NoSplitXfer
+OverrideBIOS
+OverrideValidateMode
+ProgLcdModeRegs
+ProgLcdModeStretch
+SlowDRAMrefresh
+SlowVRAM
+SwapHiBit
+
+
+5. Ramdac Names.
+
+Ramdac names should be consistent between drivers. Case, white space
+and underscore characters are ignored when comparing ramdac names. All
+names listed here are in lower case with all white space and underscores
+removed.
+
+
+6. Clock Chip Names.
+
+Clock chip names should be consistent between drivers. Case, white
+space and underscore characters are ignored when comparing clock chip
+names. All names listed here are in lower case with all white space
+and underscores removed.
+
+
+
+
+
+$XFree86: xc/programs/Xserver/hw/xfree86/Registry,v 1.18 2002/04/06 18:31:09 tsi Exp $
diff --git a/xorg-server/hw/xfree86/doc/man/xorg.conf.man.pre b/xorg-server/hw/xfree86/doc/man/xorg.conf.man.pre index 8d09862b3..6547d38aa 100644 --- a/xorg-server/hw/xfree86/doc/man/xorg.conf.man.pre +++ b/xorg-server/hw/xfree86/doc/man/xorg.conf.man.pre @@ -558,9 +558,6 @@ Default: off. This tells the mousedrv(__drivermansuffix__) and vmmouse(__drivermansuffix__)
drivers to not report failure if the mouse device can't be opened/initialised.
It has no effect on the evdev(__drivermansuffix__) or other drivers.
-The previous functionality of allowing the server to start up even if
-the mouse device can't be opened/initialised is now handled by the
-AllowEmptyInput option.
Default: false.
.TP 7
.BI "Option \*qVTSysReq\*q \*q" boolean \*q
@@ -677,12 +674,6 @@ default. Allow modules built for a different, potentially incompatible version of
the X server to load. Disabled by default.
.TP 7
-.BI "Option \*qAllowEmptyInput\*q \*q" boolean \*q
-If enabled, don't add the standard keyboard and mouse drivers, if there are no
-input devices in the config file. Enabled by default if AutoAddDevices and
-AutoEnableDevices is enabled, otherwise disabled.
-If AllowEmptyInput is on, devices using the kbd, mouse or vmmouse driver are ignored.
-.TP 7
.BI "Option \*qAutoAddDevices\*q \*q" boolean \*q
If this option is disabled, then no devices will be added from HAL events.
Enabled by default.
@@ -938,9 +929,6 @@ default. Devices with disabled will be \*qfloating\*q and only accessible by clients employing the
X Input extension. This option controls the startup behavior only, a device
may be reattached or set floating at runtime.
-.TP 7
-.BI "Option \*qSendDragEvents\*q \*q" boolean \*q
-Send core events while dragging. Enabled by default.
.PP
For pointing devices, the following options control how the pointer
is accelerated or decelerated with respect to physical device motion. Most of
|