aboutsummaryrefslogtreecommitdiff
path: root/xorg-server/hw/xfree86/i2c
diff options
context:
space:
mode:
Diffstat (limited to 'xorg-server/hw/xfree86/i2c')
-rw-r--r--xorg-server/hw/xfree86/i2c/bt829.c1566
-rw-r--r--xorg-server/hw/xfree86/i2c/bt829_module.c41
-rw-r--r--xorg-server/hw/xfree86/i2c/fi1236.c277
-rw-r--r--xorg-server/hw/xfree86/i2c/fi1236_module.c49
-rw-r--r--xorg-server/hw/xfree86/i2c/msp3430.c1184
-rw-r--r--xorg-server/hw/xfree86/i2c/msp3430_module.c49
-rw-r--r--xorg-server/hw/xfree86/i2c/tda8425.c161
-rw-r--r--xorg-server/hw/xfree86/i2c/tda8425.h29
-rw-r--r--xorg-server/hw/xfree86/i2c/tda8425_module.c49
-rw-r--r--xorg-server/hw/xfree86/i2c/tda9850.c248
-rw-r--r--xorg-server/hw/xfree86/i2c/tda9850_module.c49
-rw-r--r--xorg-server/hw/xfree86/i2c/tda9885.c204
-rw-r--r--xorg-server/hw/xfree86/i2c/tda9885_module.c49
-rw-r--r--xorg-server/hw/xfree86/i2c/uda1380.c379
-rw-r--r--xorg-server/hw/xfree86/i2c/uda1380_module.c49
-rw-r--r--xorg-server/hw/xfree86/i2c/xf86i2c.c1745
-rw-r--r--xorg-server/hw/xfree86/i2c/xf86i2c.h103
17 files changed, 3213 insertions, 3018 deletions
diff --git a/xorg-server/hw/xfree86/i2c/bt829.c b/xorg-server/hw/xfree86/i2c/bt829.c
index 64c711681..070cb2044 100644
--- a/xorg-server/hw/xfree86/i2c/bt829.c
+++ b/xorg-server/hw/xfree86/i2c/bt829.c
@@ -1,745 +1,821 @@
-/* TODO: clean up/fix CC code */
-
-#ifdef HAVE_XORG_CONFIG_H
-#include <xorg-config.h>
-#endif
-
-#include <stdlib.h>
-#include <string.h>
-#include <stdio.h>
-
-#include "xf86.h"
-#include "xf86i2c.h"
-#include "bt829.h"
-#include "i2c_def.h"
-
-/* Changing the following settings (especially VCROP) may */
-/* require modifying code that calls this driver. */
-#define HCROP 0 /* amount to crop from the left and right edges */
-#define VCROP 0 /* amount to crop from the top and bottom edges */
-
-#define BTVERSION (bt->id>>4)
-
-#define H(X) ( ((X)>>8) & 0xFF )
-#define L(X) ( (X) & 0xFF )
-
-#define LIMIT(X,A,B) (((X)<(A)) ? (A) : ((X)>(B)) ? (B) : (X) )
-
-/* Bt829 family chip ID's */
-#define BT815 0x02
-#define BT817 0x06
-#define BT819 0x07
-#define BT827 0x0C
-#define BT829 0x0E
-
-/* Bt829 registers */
-#define STATUS 0x00 /* Device Status */
-#define IFORM 0x01 /* Input Format */
-#define TDEC 0x02 /* Temporal Decimation */
-#define CROP 0x03 /* MSB Cropping */
-#define VDELAY_LO 0x04 /* Vertical Delay */
-#define VACTIVE_LO 0x05 /* Vertical Active */
-#define HDELAY_LO 0x06 /* Horizontal Delay */
-#define HACTIVE_LO 0x07 /* Horizontal Active */
-#define HSCALE_HI 0x08 /* Horizontal Scaling */
-#define HSCALE_LO 0x09 /* Horizontal Scaling */
-#define BRIGHT 0x0A /* Brightness Control */
-#define CONTROL 0x0B /* Miscellaneous Control */
-#define CONTRAST_LO 0x0C /* Luma Gain (Contrast) */
-#define SAT_U_LO 0x0D /* Chroma (U) Gain (Saturation) */
-#define SAT_V_LO 0x0E /* Chroma (V) Gain (Saturation) */
-#define HUE 0x0F /* Hue Control */
-#define SCLOOP 0x10 /* SC Loop Control */
-#define WC_UP 0x11 /* White Crush Up Count */
-#define OFORM 0x12 /* Output Format */
-#define VSCALE_HI 0x13 /* Vertical Scaling */
-#define VSCALE_LO 0x14 /* Vertical Scaling */
-#define TEST 0x15 /* Test Control */
-#define VPOLE 0x16 /* Video Timing Polarity */
-#define IDCODE 0x17 /* ID Code */
-#define ADELAY 0x18 /* AGC Delay */
-#define BDELAY 0x19 /* Burst Gate Delay */
-#define ADC 0x1A /* ADC Interface */
-#define VTC 0x1B /* Video Timing Control */
-#define CC_STATUS 0x1C /* Extended Data Services/Closed Capt Status */
-#define CC_DATA 0x1D /* Extended Data Services/Closed Capt Data */
-#define WC_DN 0x1E /* White Crush Down Count */
-#define SRESET 0x1F /* Software Reset */
-#define P_IO 0x3F /* Programmable I/O */
-
-static CARD8 btread(BT829Ptr bt, CARD8 reg)
-{
- CARD8 v;
-
- I2C_WriteRead(&(bt->d), &reg, 1, &v, 1);
-
- return v;
-}
-
-static void btwrite(BT829Ptr bt, CARD8 reg, CARD8 val)
-{
- CARD8 data[2];
-
- data[0] = reg;
- data[1] = val;
- I2C_WriteRead(&(bt->d), data, 2, NULL, 0);
-}
-
-/*
- * Register access
- */
-static void btwrite_status(BT829Ptr bt) /* STATUS */
-{
- btwrite(bt, STATUS, 0x00); /* clear */
-}
-
-static void btwrite_iform(BT829Ptr bt) /* IFORM */
-{
- int xtsel;
-
- switch (bt->format) {
- case BT829_NTSC:
- case BT829_NTSC_JAPAN:
- case BT829_PAL_M:
- case BT829_PAL_N_COMB: /* gatos says xtsel = 2 */
- xtsel = 1;
- break;
- case BT829_PAL:
- case BT829_PAL_N:
- case BT829_SECAM:
- xtsel = 2;
- break;
- default: /* shouldn't get here */
- xtsel = 3; /* hardware default */
- break;
- }
-
- btwrite(bt, IFORM, (bt->mux<<5) | (xtsel<<3) | bt->format);
-}
-
-static void btwrite_tdec(BT829Ptr bt) /* TDEC */
-{
- /* use default */
-}
-
-static void btwrite_crop(BT829Ptr bt) /* CROP */
-{
- btwrite(bt, CROP, (H(bt->vdelay)<<6) | (H(bt->vactive)<<4) |
- (H(bt->hdelay)<<2) | H(bt->width));
-}
-
-static void btwrite_vdelay_lo(BT829Ptr bt) /* VDELAY_LO */
-{
- btwrite(bt, VDELAY_LO, L(bt->vdelay));
-}
-
-static void btwrite_vactive_lo(BT829Ptr bt) /* VACTIVE_LO */
-{
- btwrite(bt, VACTIVE_LO, L(bt->vactive));
-}
-
-static void btwrite_hdelay_lo(BT829Ptr bt) /* HDELAY_LO */
-{
- btwrite(bt, HDELAY_LO, L(bt->hdelay));
-}
-
-static void btwrite_hactive_lo(BT829Ptr bt) /* HACTIVE_LO */
-{
- btwrite(bt, HACTIVE_LO, L(bt->width));
-}
-
-static void btwrite_hscale_hi(BT829Ptr bt) /* HSCALE_HI */
-{
- btwrite(bt, HSCALE_HI, H(bt->hscale));
-}
-
-static void btwrite_hscale_lo(BT829Ptr bt) /* HSCALE_LO */
-{
- btwrite(bt, HSCALE_LO, L(bt->hscale));
-}
-
-static void btwrite_bright(BT829Ptr bt) /* BRIGHT */
-{
- btwrite(bt, BRIGHT, bt->brightness);
-}
-
-static void btwrite_control(BT829Ptr bt) /* CONTROL */
-{
- int ldec;
-
- /* The data sheet says ldec should always be 0 for SECAM */
- /* but the picture quality is better with ldec = 1 */
- ldec = (bt->width > 360); /* gatos says 384 */
-
- btwrite(bt, CONTROL,
- ((bt->mux==bt->svideo_mux) ? 0xC0:0x00) | /* LNOTCH and COMP */
- (ldec<<5) | (H(bt->contrast)<<2) | (H(bt->sat_u)<<1) | H(bt->sat_v));
-}
-
-static void btwrite_contrast_lo(BT829Ptr bt) /* CONTRAST_LO */
-{
- btwrite(bt, CONTRAST_LO, L(bt->contrast));
-}
-
-static void btwrite_sat_u_lo(BT829Ptr bt) /* SAT_U_LO */
-{
- btwrite(bt, SAT_U_LO, L(bt->sat_u));
-}
-
-static void btwrite_sat_v_lo(BT829Ptr bt) /* SAT_V_LO */
-{
- btwrite(bt, SAT_V_LO, L(bt->sat_v));
-}
-
-static void btwrite_hue(BT829Ptr bt) /* HUE */
-{
- btwrite(bt, HUE, bt->hue);
-}
-
-static void btwrite_scloop(BT829Ptr bt) /* SCLOOP */
-{
- if (BTVERSION >= BT827) {
- btwrite(bt, SCLOOP,
- (bt->format==BT829_SECAM) ? 0x10:0x00 /* QCIF or AUTO */
- );
- }
-}
-
-static void btwrite_wc_up(BT829Ptr bt) /* WC_UP */
-{
- if (BTVERSION >= BT827) {
- /* use default */
- }
-}
-
-static void btwrite_oform(BT829Ptr bt) /* OFORM */
-{
- btwrite(bt, OFORM, (bt->code<<3) | (bt->len<<2) |
- 0x02 /* RANGE = 0, CORE = 0, VBI_FRAME = 0, OES = 2 (default) */
- );
-}
-
-static void btwrite_vscale_hi(BT829Ptr bt) /* VSCALE_HI */
-{
- btwrite(bt, VSCALE_HI, H(bt->vscale) |
- 0x60 /* YCOMB = 0, COMB = 1, INT = 1 (default) */
- );
-}
-
-static void btwrite_vscale_lo(BT829Ptr bt) /* VSCALE_LO */
-{
- btwrite(bt, VSCALE_LO, L(bt->vscale));
-}
-
-/* TEST should not be written to */
-
-static void btwrite_vpole(BT829Ptr bt) /* VPOLE */
-{
- btwrite(bt, VPOLE, (bt->out_en<<7));
-}
-
-/* IDCODE is read only */
-
-static void btwrite_adelay(BT829Ptr bt) /* ADELAY */
-{
- switch (bt->format) {
- case BT829_NTSC:
- case BT829_NTSC_JAPAN:
- case BT829_PAL_M:
- btwrite(bt, ADELAY, 104);
- break;
- case BT829_PAL:
- case BT829_PAL_N:
- case BT829_SECAM:
- case BT829_PAL_N_COMB:
- btwrite(bt, ADELAY, 127);
- break;
- default: /* shouldn't get here */
- btwrite(bt, ADELAY, 104); /* hardware default */
- break;
- }
-}
-
-static void btwrite_bdelay(BT829Ptr bt) /* BDELAY */
-{
- switch (bt->format) {
- case BT829_NTSC:
- case BT829_NTSC_JAPAN:
- case BT829_PAL_M:
- btwrite(bt, BDELAY, 93);
- break;
- case BT829_PAL:
- case BT829_PAL_N:
- case BT829_PAL_N_COMB:
- btwrite(bt, BDELAY, 114);
- break;
- case BT829_SECAM:
- btwrite(bt, BDELAY, 160);
- break;
- default: /* shouldn't get here */
- btwrite(bt, BDELAY, 93); /* hardware default */
- break;
- }
-}
-
-static void btwrite_adc(BT829Ptr bt) /* ADC */
-{
- btwrite(bt, ADC, bt->mux==bt->svideo_mux ? 0x80:0x82); /* CSLEEP = 0 or 1 */
-}
-
-static void btwrite_vtc(BT829Ptr bt) /* VTC */
-{
- int vfilt = 0; /* hardware default */
-
- if (BTVERSION > BT827) { /* gatos says >= BT827 */
- switch (bt->format) {
- case BT829_NTSC:
- case BT829_NTSC_JAPAN:
- case BT829_PAL_M:
- case BT829_PAL_N_COMB: /* gatos groups with BT829_PAL */
- if (bt->width <= 360) vfilt = 1; /* gatos says <= 240 */
- if (bt->width <= 180) vfilt = 2; /* gatos says <= 120 */
- if (bt->width <= 90) vfilt = 3; /* gatos says <= 60 */
- break;
- case BT829_PAL:
- case BT829_PAL_N:
- case BT829_SECAM:
- if (bt->width <= 384) vfilt = 1;
- if (bt->width <= 192) vfilt = 2;
- if (bt->width<= 96) vfilt = 3;
- break;
- default: /* shouldn't get here */
- break; /* use hardware default */
- }
- btwrite(bt, VTC, (bt->vbien<<4) | (bt->vbifmt<<3) | vfilt);
- }
-}
-
-static void btwrite_cc_status(BT829Ptr bt) /* CC_STATUS */
-{ /* FIXME: ATI specific */
- if (BTVERSION >= BT827) {
- if (bt->ccmode == 0) btwrite(bt, CC_STATUS, 0x00);
- /* 0x40 is activate to set the CCVALID line. Not required yet */
- else btwrite(bt, CC_STATUS, (bt->ccmode<<4) | 0x40);
- }
-}
-
-/* CC_DATA is read only */
-
-static void btwrite_wc_dn(BT829Ptr bt) /* WC_DN */
-{
- if (BTVERSION >= BT827) {
- /* use default */
- }
-}
-
-static void bt_reset(BT829Ptr bt) { /* SRESET */
- btwrite(bt, SRESET, 0x0); /* Reset all registers */
-}
-
-static void btwrite_p_io(BT829Ptr bt) /* P_IO */
-{
- if (BTVERSION >= BT827) {
- btwrite(bt, P_IO, bt->p_io);
- }
-}
-
-/*
- * Deal with dependencies
- */
-static void propagate_changes(BT829Ptr bt)
-{
- CARD16 hdelay, unscaled_hdelay, vdelay, hscale, vscale;
- int htotal, vactive;
-
- switch (bt->format) {
- case BT829_NTSC:
- case BT829_NTSC_JAPAN:
- case BT829_PAL_M:
- vdelay = 22;
- htotal = 754;
- vactive = 480;
- unscaled_hdelay = 135;
- break;
- case BT829_PAL:
- case BT829_PAL_N:
- vdelay = (bt->tunertype==5) ? 34 : 22;
- htotal = 922;
- vactive = 576;
- unscaled_hdelay = 186;
- break;
- case BT829_SECAM:
- vdelay = 34;
- htotal = 922;
- vactive = 576;
- unscaled_hdelay = 186;
- break;
- case BT829_PAL_N_COMB:
- vdelay = (bt->tunertype==5) ? 34 : 22; /* windows says 22 */
- htotal = 754; /* gatos and windows say 922 */
- vactive = 576;
- unscaled_hdelay = 135; /* gatos and windows say 186 */
- break;
- default: /* shouldn't get here */
- vdelay = 22; /* hardware default */
- htotal = 754;
- vactive = 480; /* hardware default */
- unscaled_hdelay = 135;
- break;
- }
-
- bt->htotal = htotal; /* Used for error checking in bt829_SetCaptSize */
-
- hscale = 4096 * htotal / (bt->width + 2 * HCROP)-4096;
- hdelay = (
- HCROP + (bt->width + 2 * HCROP) * unscaled_hdelay / htotal
- ) & 0x3FE;
-
- vactive = vactive - 2 * VCROP;
- vdelay = vdelay + VCROP;
- vscale = (0x10000 - (512*vactive/bt->height-512)) & 0x1FFF;
-
- if ((hdelay != bt->hdelay) || (vdelay != bt->vdelay) ||
- (vactive != bt->vactive) || (hscale != bt->hscale) ||
- (vscale != bt->vscale)) {
- bt->hdelay = hdelay;
- bt->vdelay = vdelay;
- bt->vactive = vactive;
- bt->hscale = hscale;
- bt->vscale = vscale;
- btwrite_crop(bt);
- btwrite_vdelay_lo(bt);
- btwrite_vactive_lo(bt);
- btwrite_hdelay_lo(bt);
- btwrite_hscale_hi(bt);
- btwrite_hscale_lo(bt);
- btwrite_control(bt);
- btwrite_vscale_hi(bt);
- btwrite_vscale_lo(bt);
- }
-}
-
-static void write_all(BT829Ptr bt)
-{
- bt_reset(bt);
- propagate_changes(bt); /* ensure consistency */
- btwrite_iform(bt);
- btwrite_tdec(bt);
- btwrite_crop(bt);
- btwrite_vdelay_lo(bt);
- btwrite_vactive_lo(bt);
- btwrite_hdelay_lo(bt);
- btwrite_hactive_lo(bt);
- btwrite_hscale_hi(bt);
- btwrite_hscale_lo(bt);
- btwrite_bright(bt);
- btwrite_control(bt);
- btwrite_contrast_lo(bt);
- btwrite_sat_u_lo(bt);
- btwrite_sat_v_lo(bt);
- btwrite_hue(bt);
- btwrite_scloop(bt);
- btwrite_wc_up(bt);
- btwrite_oform(bt);
- btwrite_vscale_hi(bt);
- btwrite_vscale_lo(bt);
- btwrite_vpole(bt);
- btwrite_adelay(bt);
- btwrite_bdelay(bt);
- btwrite_adc(bt);
- btwrite_vtc(bt);
-/* btwrite_cc_status(bt); */ /* FIXME: CC code needs cleaning */
- btwrite_wc_dn(bt);
- btwrite_p_io(bt);
-}
-
-/*
- * Public functions
- */
-BT829Ptr bt829_Detect(I2CBusPtr b, I2CSlaveAddr addr)
-{
- BT829Ptr bt;
- I2CByte a;
-
- bt = calloc(1, sizeof(BT829Rec));
- if(bt == NULL) return NULL;
- bt->d.DevName = strdup("BT829 video decoder");
- bt->d.SlaveAddr = addr;
- bt->d.pI2CBus = b;
- bt->d.NextDev = NULL;
- bt->d.StartTimeout = b->StartTimeout;
- bt->d.BitTimeout = b->BitTimeout;
- bt->d.AcknTimeout = b->AcknTimeout;
- bt->d.ByteTimeout = b->ByteTimeout;
-
-
- if(!I2C_WriteRead(&(bt->d), NULL, 0, &a, 1))
- {
- free(bt);
- return NULL;
- }
-
- bt->id = btread(bt,IDCODE);
-
- free(bt->d.DevName);
- bt->d.DevName = calloc(200, sizeof(char));
- switch(BTVERSION){
- case BT815:
- sprintf(bt->d.DevName, "bt815a video decoder, revision %d",bt->id & 0xf);
- break;
- case BT817:
- sprintf(bt->d.DevName, "bt817a video decoder, revision %d",bt->id & 0xf);
- break;
- case BT819:
- sprintf(bt->d.DevName, "bt819a video decoder, revision %d",bt->id & 0xf);
- break;
- case BT827:
- sprintf(bt->d.DevName, "bt827a/b video decoder, revision %d",bt->id & 0xf);
- break;
- case BT829:
- sprintf(bt->d.DevName, "bt829a/b video decoder, revision %d",bt->id & 0xf);
- break;
- default:
- sprintf(bt->d.DevName, "bt8xx/unknown video decoder version %d, revision %d",bt->id >> 4,bt->id & 0xf);
- break;
- }
-
- /* set default parameters */
- if(!I2CDevInit(&(bt->d)))
- {
- free(bt);
- return NULL;
- }
-
- bt->tunertype = 1;
-
- bt->brightness = 0; /* hardware default */
- bt->ccmode = 0;
- bt->code = 0; /* hardware default */
- bt->contrast = 216; /* hardware default */
- bt->format = BT829_NTSC;
- bt->height = 480; /* hardware default for vactive */
- bt->hue = 0; /* hardware default */
- bt->len = 1; /* hardware default */
- bt->mux = BT829_MUX0; /* hardware default */
- bt->out_en = 0; /* hardware default */
- bt->p_io = 0; /* hardware default */
- bt->sat_u = 254; /* hardware default */
- bt->sat_v = 180; /* hardware default */
- bt->vbien = 0; /* hardware default */
- bt->vbifmt = 0; /* hardware default */
- bt->width = 640; /* hardware default for hactive */
-
- bt->hdelay = 120; /* hardware default */
- bt->hscale = 684; /* hardware default */
- bt->vactive = 480; /* hardware default */
- bt->vdelay = 22; /* hardware default */
- bt->vscale = 0; /* hardware default */
-
- bt->htotal = 754; /* NTSC */
- bt->svideo_mux = 0; /* no s-video */
-
- return bt;
-}
-
-int bt829_ATIInit(BT829Ptr bt)
-{
- bt->code = 1;
- bt->len = 0;
- bt->vbien = 1;
- bt->vbifmt = 1;
- bt->svideo_mux = BT829_MUX1;
-
- write_all (bt);
-
- return 0;
-}
-
-int bt829_SetFormat(BT829Ptr bt, CARD8 format)
-{
- if ((format < 1) || (format > 7)) return -1;
- if ((BTVERSION <= BT819) &&
- (format != BT829_NTSC) && (format != BT829_PAL)) return -1;
- if (format == bt->format) return 0;
- bt->format = format;
- propagate_changes(bt);
- btwrite_iform(bt);
- btwrite_scloop(bt);
- btwrite_adelay(bt);
- btwrite_bdelay(bt);
- btwrite_vtc(bt);
- return 0;
-}
-
-int bt829_SetMux(BT829Ptr bt, CARD8 mux)
-{
- if ((mux < 1) || (mux > 3)) return -1;
- if (mux == bt->mux) return 0;
- bt->mux = mux;
- /* propagate_changes(bt); */ /* no dependencies */
- btwrite_iform(bt);
- btwrite_control(bt);
- btwrite_adc(bt);
- return 0;
-}
-
-void bt829_SetBrightness(BT829Ptr bt, int brightness)
-{
- brightness = LIMIT(brightness,-1000,999); /* ensure -128 <= brightness <= 127 below */
- brightness = (128*brightness)/1000;
- if (brightness == bt->brightness) return;
- bt->brightness = brightness;
- /* propagate_changes(bt); */ /* no dependencies */
- btwrite_bright(bt);
-}
-
-void bt829_SetContrast(BT829Ptr bt, int contrast)
-{
- contrast = LIMIT(contrast,-1000,1000);
- contrast = (216*(contrast+1000))/1000;
- if (contrast == bt->contrast) return;
- bt->contrast = contrast;
- /* propagate_changes(bt); */ /* no dependencies */
- btwrite_control(bt);
- btwrite_contrast_lo(bt);
-}
-
-void bt829_SetSaturation(BT829Ptr bt, int saturation)
-{
- CARD16 sat_u, sat_v;
-
- saturation = LIMIT(saturation,-1000,1000);
- sat_u = (254*(saturation+1000))/1000;
- sat_v = (180*(saturation+1000))/1000;
- if ((sat_u == bt->sat_u) && (sat_v == bt->sat_v)) return;
- bt->sat_u = sat_u;
- bt->sat_v = sat_v;
- /* propagate_changes(bt); */ /* no dependencies */
- btwrite_control(bt);
- btwrite_sat_u_lo(bt);
- btwrite_sat_v_lo(bt);
-}
-
-void bt829_SetTint(BT829Ptr bt, int hue)
-{
- hue = LIMIT(hue,-1000,999); /* ensure -128 <= hue <= 127 below */
- hue = (128*hue)/1000;
- if (hue == bt->hue) return;
- bt->hue = hue;
- /* propagate_changes(bt); */ /* no dependencies */
- btwrite_hue(bt);
-}
-
-int bt829_SetCaptSize(BT829Ptr bt, int width, int height)
-{
- if ((width > bt->htotal - 2 * HCROP) ||
- (16 * width < bt->htotal - 32 * HCROP)) return -1;
- if ((height > bt->vactive) || (16 * height < bt->vactive)) return -1;
- if ((width == bt->width) && (height == bt->height)) return 0;
- bt->width = width;
- bt->height = height;
- propagate_changes(bt);
- btwrite_crop(bt);
- btwrite_hactive_lo(bt);
- btwrite_control(bt);
- btwrite_vtc(bt);
- return 0;
-}
-
-int bt829_SetCC(BT829Ptr bt) /* FIXME: should take ccmode as a parameter */
-{
- if (BTVERSION < BT827) return -1; /* can't do it */
- /* propagate_changes(bt); */ /* no dependencies */
- btwrite_cc_status(bt);
- /* we write to STATUS to reset the CCVALID flag */
- if (bt->ccmode != 0) btwrite_status(bt);
- return 0;
-}
-
-void bt829_SetOUT_EN(BT829Ptr bt, BOOL out_en)
-{
- out_en = (out_en != 0);
- if (out_en == bt->out_en) return;
- bt->out_en = out_en;
- /* propagate_changes(bt); */ /* no dependencies */
- btwrite_vpole(bt);
-}
-
-void bt829_SetP_IO(BT829Ptr bt, CARD8 p_io)
-{
- if (p_io == bt->p_io) return;
- bt->p_io = p_io;
- /* propagate_changes(bt); */ /* no dependencies */
- btwrite_p_io(bt);
-}
-
-#define BTREAD(R) btread(bt,(R))
-
-#if 0
-
-void bt829_getCCdata(BT829Ptr bt,struct CCdata *data)
-{
- CARD8 status;
- data->num_valid=0;
- /* wait for buffer to be half full (means 8/16 bytes)
- * either 4 (one of CC/EDS) or 2 (both CC/EDS) frames */
- if(!(BTREAD(STATUS)&0x04)) return; /* could comment this line */
- for(;data->num_valid<CC_FIFO_SIZE;data->num_valid++) {
- status=BTREAD(CC_STATUS);
- if(!(status&0x04)) break;
- data->data[data->num_valid]= BTREAD(CC_DATA)&0x7f;
- /* stripped high bit (parity) */
- data->status[data->num_valid]= (CCS_EDS*((status&0x02)>>1)) |
- (CCS_HIGH*(status&0x01)) |
- (CCS_OVER*((status&0x08)>>3)) |
- (CCS_PAR*((status&0x80)>>7)) ; }
- btwrite(bt,STATUS,0x00); /* Reset CCVALID status bit */
- return;
-}
-
-#endif
-
-/* ------------------------------------------------------------------------ */
-/* Debug and report routines */
-
-#define DUMPREG(REG) \
- xf86DrvMsg(bt->d.pI2CBus->scrnIndex,X_INFO," %-12s (0x%02X) = 0x%02X\n", \
- #REG,REG,BTREAD(REG))
-
-/*static void bt829_dumpregs(BT829Ptr bt)
-{
- DUMPREG(STATUS);
- DUMPREG(IFORM);
- DUMPREG(TDEC);
- DUMPREG(CROP);
- DUMPREG(VDELAY_LO);
- DUMPREG(VACTIVE_LO);
- DUMPREG(HDELAY_LO);
- DUMPREG(HACTIVE_LO);
- DUMPREG(HSCALE_HI);
- DUMPREG(HSCALE_LO);
- DUMPREG(BRIGHT);
- DUMPREG(CONTROL);
- DUMPREG(CONTRAST_LO);
- DUMPREG(SAT_U_LO);
- DUMPREG(SAT_V_LO);
- DUMPREG(HUE);
- if (BTVERSION >= BT827) {
- DUMPREG(SCLOOP);
- DUMPREG(WC_UP) ; }
- DUMPREG(OFORM);
- DUMPREG(VSCALE_HI);
- DUMPREG(VSCALE_LO);
- DUMPREG(TEST);
- DUMPREG(VPOLE);
- DUMPREG(IDCODE);
- DUMPREG(ADELAY);
- DUMPREG(BDELAY);
- DUMPREG(ADC);
- if (BTVERSION >= BT827) {
- DUMPREG(VTC);
- DUMPREG(CC_STATUS);
- DUMPREG(CC_DATA);
- DUMPREG(WC_DN);
- DUMPREG(P_IO) ; }
-}*/
+/* TODO: clean up/fix CC code */
+
+#ifdef HAVE_XORG_CONFIG_H
+#include <xorg-config.h>
+#endif
+
+#include <stdlib.h>
+#include <string.h>
+#include <stdio.h>
+
+#include "xf86.h"
+#include "xf86i2c.h"
+#include "bt829.h"
+#include "i2c_def.h"
+
+/* Changing the following settings (especially VCROP) may */
+/* require modifying code that calls this driver. */
+#define HCROP 0 /* amount to crop from the left and right edges */
+#define VCROP 0 /* amount to crop from the top and bottom edges */
+
+#define BTVERSION (bt->id>>4)
+
+#define H(X) ( ((X)>>8) & 0xFF )
+#define L(X) ( (X) & 0xFF )
+
+#define LIMIT(X,A,B) (((X)<(A)) ? (A) : ((X)>(B)) ? (B) : (X) )
+
+/* Bt829 family chip ID's */
+#define BT815 0x02
+#define BT817 0x06
+#define BT819 0x07
+#define BT827 0x0C
+#define BT829 0x0E
+
+/* Bt829 registers */
+#define STATUS 0x00 /* Device Status */
+#define IFORM 0x01 /* Input Format */
+#define TDEC 0x02 /* Temporal Decimation */
+#define CROP 0x03 /* MSB Cropping */
+#define VDELAY_LO 0x04 /* Vertical Delay */
+#define VACTIVE_LO 0x05 /* Vertical Active */
+#define HDELAY_LO 0x06 /* Horizontal Delay */
+#define HACTIVE_LO 0x07 /* Horizontal Active */
+#define HSCALE_HI 0x08 /* Horizontal Scaling */
+#define HSCALE_LO 0x09 /* Horizontal Scaling */
+#define BRIGHT 0x0A /* Brightness Control */
+#define CONTROL 0x0B /* Miscellaneous Control */
+#define CONTRAST_LO 0x0C /* Luma Gain (Contrast) */
+#define SAT_U_LO 0x0D /* Chroma (U) Gain (Saturation) */
+#define SAT_V_LO 0x0E /* Chroma (V) Gain (Saturation) */
+#define HUE 0x0F /* Hue Control */
+#define SCLOOP 0x10 /* SC Loop Control */
+#define WC_UP 0x11 /* White Crush Up Count */
+#define OFORM 0x12 /* Output Format */
+#define VSCALE_HI 0x13 /* Vertical Scaling */
+#define VSCALE_LO 0x14 /* Vertical Scaling */
+#define TEST 0x15 /* Test Control */
+#define VPOLE 0x16 /* Video Timing Polarity */
+#define IDCODE 0x17 /* ID Code */
+#define ADELAY 0x18 /* AGC Delay */
+#define BDELAY 0x19 /* Burst Gate Delay */
+#define ADC 0x1A /* ADC Interface */
+#define VTC 0x1B /* Video Timing Control */
+#define CC_STATUS 0x1C /* Extended Data Services/Closed Capt Status */
+#define CC_DATA 0x1D /* Extended Data Services/Closed Capt Data */
+#define WC_DN 0x1E /* White Crush Down Count */
+#define SRESET 0x1F /* Software Reset */
+#define P_IO 0x3F /* Programmable I/O */
+
+static CARD8
+btread(BT829Ptr bt, CARD8 reg)
+{
+ CARD8 v;
+
+ I2C_WriteRead(&(bt->d), &reg, 1, &v, 1);
+
+ return v;
+}
+
+static void
+btwrite(BT829Ptr bt, CARD8 reg, CARD8 val)
+{
+ CARD8 data[2];
+
+ data[0] = reg;
+ data[1] = val;
+ I2C_WriteRead(&(bt->d), data, 2, NULL, 0);
+}
+
+/*
+ * Register access
+ */
+static void
+btwrite_status(BT829Ptr bt)
+{ /* STATUS */
+ btwrite(bt, STATUS, 0x00); /* clear */
+}
+
+static void
+btwrite_iform(BT829Ptr bt)
+{ /* IFORM */
+ int xtsel;
+
+ switch (bt->format) {
+ case BT829_NTSC:
+ case BT829_NTSC_JAPAN:
+ case BT829_PAL_M:
+ case BT829_PAL_N_COMB: /* gatos says xtsel = 2 */
+ xtsel = 1;
+ break;
+ case BT829_PAL:
+ case BT829_PAL_N:
+ case BT829_SECAM:
+ xtsel = 2;
+ break;
+ default: /* shouldn't get here */
+ xtsel = 3; /* hardware default */
+ break;
+ }
+
+ btwrite(bt, IFORM, (bt->mux << 5) | (xtsel << 3) | bt->format);
+}
+
+static void
+btwrite_tdec(BT829Ptr bt)
+{ /* TDEC */
+ /* use default */
+}
+
+static void
+btwrite_crop(BT829Ptr bt)
+{ /* CROP */
+ btwrite(bt, CROP, (H(bt->vdelay) << 6) | (H(bt->vactive) << 4) |
+ (H(bt->hdelay) << 2) | H(bt->width));
+}
+
+static void
+btwrite_vdelay_lo(BT829Ptr bt)
+{ /* VDELAY_LO */
+ btwrite(bt, VDELAY_LO, L(bt->vdelay));
+}
+
+static void
+btwrite_vactive_lo(BT829Ptr bt)
+{ /* VACTIVE_LO */
+ btwrite(bt, VACTIVE_LO, L(bt->vactive));
+}
+
+static void
+btwrite_hdelay_lo(BT829Ptr bt)
+{ /* HDELAY_LO */
+ btwrite(bt, HDELAY_LO, L(bt->hdelay));
+}
+
+static void
+btwrite_hactive_lo(BT829Ptr bt)
+{ /* HACTIVE_LO */
+ btwrite(bt, HACTIVE_LO, L(bt->width));
+}
+
+static void
+btwrite_hscale_hi(BT829Ptr bt)
+{ /* HSCALE_HI */
+ btwrite(bt, HSCALE_HI, H(bt->hscale));
+}
+
+static void
+btwrite_hscale_lo(BT829Ptr bt)
+{ /* HSCALE_LO */
+ btwrite(bt, HSCALE_LO, L(bt->hscale));
+}
+
+static void
+btwrite_bright(BT829Ptr bt)
+{ /* BRIGHT */
+ btwrite(bt, BRIGHT, bt->brightness);
+}
+
+static void
+btwrite_control(BT829Ptr bt)
+{ /* CONTROL */
+ int ldec;
+
+ /* The data sheet says ldec should always be 0 for SECAM */
+ /* but the picture quality is better with ldec = 1 */
+ ldec = (bt->width > 360); /* gatos says 384 */
+
+ btwrite(bt, CONTROL, ((bt->mux == bt->svideo_mux) ? 0xC0 : 0x00) | /* LNOTCH and COMP */
+ (ldec << 5) | (H(bt->contrast) << 2) | (H(bt->sat_u) << 1) | H(bt->
+ sat_v));
+}
+
+static void
+btwrite_contrast_lo(BT829Ptr bt)
+{ /* CONTRAST_LO */
+ btwrite(bt, CONTRAST_LO, L(bt->contrast));
+}
+
+static void
+btwrite_sat_u_lo(BT829Ptr bt)
+{ /* SAT_U_LO */
+ btwrite(bt, SAT_U_LO, L(bt->sat_u));
+}
+
+static void
+btwrite_sat_v_lo(BT829Ptr bt)
+{ /* SAT_V_LO */
+ btwrite(bt, SAT_V_LO, L(bt->sat_v));
+}
+
+static void
+btwrite_hue(BT829Ptr bt)
+{ /* HUE */
+ btwrite(bt, HUE, bt->hue);
+}
+
+static void
+btwrite_scloop(BT829Ptr bt)
+{ /* SCLOOP */
+ if (BTVERSION >= BT827) {
+ btwrite(bt, SCLOOP, (bt->format == BT829_SECAM) ? 0x10 : 0x00 /* QCIF or AUTO */
+ );
+ }
+}
+
+static void
+btwrite_wc_up(BT829Ptr bt)
+{ /* WC_UP */
+ if (BTVERSION >= BT827) {
+ /* use default */
+ }
+}
+
+static void
+btwrite_oform(BT829Ptr bt)
+{ /* OFORM */
+ btwrite(bt, OFORM, (bt->code << 3) | (bt->len << 2) | 0x02 /* RANGE = 0, CORE = 0, VBI_FRAME = 0, OES = 2 (default) */
+ );
+}
+
+static void
+btwrite_vscale_hi(BT829Ptr bt)
+{ /* VSCALE_HI */
+ btwrite(bt, VSCALE_HI, H(bt->vscale) | 0x60 /* YCOMB = 0, COMB = 1, INT = 1 (default) */
+ );
+}
+
+static void
+btwrite_vscale_lo(BT829Ptr bt)
+{ /* VSCALE_LO */
+ btwrite(bt, VSCALE_LO, L(bt->vscale));
+}
+
+/* TEST should not be written to */
+
+static void
+btwrite_vpole(BT829Ptr bt)
+{ /* VPOLE */
+ btwrite(bt, VPOLE, (bt->out_en << 7));
+}
+
+/* IDCODE is read only */
+
+static void
+btwrite_adelay(BT829Ptr bt)
+{ /* ADELAY */
+ switch (bt->format) {
+ case BT829_NTSC:
+ case BT829_NTSC_JAPAN:
+ case BT829_PAL_M:
+ btwrite(bt, ADELAY, 104);
+ break;
+ case BT829_PAL:
+ case BT829_PAL_N:
+ case BT829_SECAM:
+ case BT829_PAL_N_COMB:
+ btwrite(bt, ADELAY, 127);
+ break;
+ default: /* shouldn't get here */
+ btwrite(bt, ADELAY, 104); /* hardware default */
+ break;
+ }
+}
+
+static void
+btwrite_bdelay(BT829Ptr bt)
+{ /* BDELAY */
+ switch (bt->format) {
+ case BT829_NTSC:
+ case BT829_NTSC_JAPAN:
+ case BT829_PAL_M:
+ btwrite(bt, BDELAY, 93);
+ break;
+ case BT829_PAL:
+ case BT829_PAL_N:
+ case BT829_PAL_N_COMB:
+ btwrite(bt, BDELAY, 114);
+ break;
+ case BT829_SECAM:
+ btwrite(bt, BDELAY, 160);
+ break;
+ default: /* shouldn't get here */
+ btwrite(bt, BDELAY, 93); /* hardware default */
+ break;
+ }
+}
+
+static void
+btwrite_adc(BT829Ptr bt)
+{ /* ADC */
+ btwrite(bt, ADC, bt->mux == bt->svideo_mux ? 0x80 : 0x82); /* CSLEEP = 0 or 1 */
+}
+
+static void
+btwrite_vtc(BT829Ptr bt)
+{ /* VTC */
+ int vfilt = 0; /* hardware default */
+
+ if (BTVERSION > BT827) { /* gatos says >= BT827 */
+ switch (bt->format) {
+ case BT829_NTSC:
+ case BT829_NTSC_JAPAN:
+ case BT829_PAL_M:
+ case BT829_PAL_N_COMB: /* gatos groups with BT829_PAL */
+ if (bt->width <= 360)
+ vfilt = 1; /* gatos says <= 240 */
+ if (bt->width <= 180)
+ vfilt = 2; /* gatos says <= 120 */
+ if (bt->width <= 90)
+ vfilt = 3; /* gatos says <= 60 */
+ break;
+ case BT829_PAL:
+ case BT829_PAL_N:
+ case BT829_SECAM:
+ if (bt->width <= 384)
+ vfilt = 1;
+ if (bt->width <= 192)
+ vfilt = 2;
+ if (bt->width <= 96)
+ vfilt = 3;
+ break;
+ default: /* shouldn't get here */
+ break; /* use hardware default */
+ }
+ btwrite(bt, VTC, (bt->vbien << 4) | (bt->vbifmt << 3) | vfilt);
+ }
+}
+
+static void
+btwrite_cc_status(BT829Ptr bt)
+{ /* CC_STATUS *//* FIXME: ATI specific */
+ if (BTVERSION >= BT827) {
+ if (bt->ccmode == 0)
+ btwrite(bt, CC_STATUS, 0x00);
+ /* 0x40 is activate to set the CCVALID line. Not required yet */
+ else
+ btwrite(bt, CC_STATUS, (bt->ccmode << 4) | 0x40);
+ }
+}
+
+/* CC_DATA is read only */
+
+static void
+btwrite_wc_dn(BT829Ptr bt)
+{ /* WC_DN */
+ if (BTVERSION >= BT827) {
+ /* use default */
+ }
+}
+
+static void
+bt_reset(BT829Ptr bt)
+{ /* SRESET */
+ btwrite(bt, SRESET, 0x0); /* Reset all registers */
+}
+
+static void
+btwrite_p_io(BT829Ptr bt)
+{ /* P_IO */
+ if (BTVERSION >= BT827) {
+ btwrite(bt, P_IO, bt->p_io);
+ }
+}
+
+/*
+ * Deal with dependencies
+ */
+static void
+propagate_changes(BT829Ptr bt)
+{
+ CARD16 hdelay, unscaled_hdelay, vdelay, hscale, vscale;
+ int htotal, vactive;
+
+ switch (bt->format) {
+ case BT829_NTSC:
+ case BT829_NTSC_JAPAN:
+ case BT829_PAL_M:
+ vdelay = 22;
+ htotal = 754;
+ vactive = 480;
+ unscaled_hdelay = 135;
+ break;
+ case BT829_PAL:
+ case BT829_PAL_N:
+ vdelay = (bt->tunertype == 5) ? 34 : 22;
+ htotal = 922;
+ vactive = 576;
+ unscaled_hdelay = 186;
+ break;
+ case BT829_SECAM:
+ vdelay = 34;
+ htotal = 922;
+ vactive = 576;
+ unscaled_hdelay = 186;
+ break;
+ case BT829_PAL_N_COMB:
+ vdelay = (bt->tunertype == 5) ? 34 : 22; /* windows says 22 */
+ htotal = 754; /* gatos and windows say 922 */
+ vactive = 576;
+ unscaled_hdelay = 135; /* gatos and windows say 186 */
+ break;
+ default: /* shouldn't get here */
+ vdelay = 22; /* hardware default */
+ htotal = 754;
+ vactive = 480; /* hardware default */
+ unscaled_hdelay = 135;
+ break;
+ }
+
+ bt->htotal = htotal; /* Used for error checking in bt829_SetCaptSize */
+
+ hscale = 4096 * htotal / (bt->width + 2 * HCROP) - 4096;
+ hdelay =
+ (HCROP + (bt->width + 2 * HCROP) * unscaled_hdelay / htotal) & 0x3FE;
+
+ vactive = vactive - 2 * VCROP;
+ vdelay = vdelay + VCROP;
+ vscale = (0x10000 - (512 * vactive / bt->height - 512)) & 0x1FFF;
+
+ if ((hdelay != bt->hdelay) || (vdelay != bt->vdelay) ||
+ (vactive != bt->vactive) || (hscale != bt->hscale) ||
+ (vscale != bt->vscale)) {
+ bt->hdelay = hdelay;
+ bt->vdelay = vdelay;
+ bt->vactive = vactive;
+ bt->hscale = hscale;
+ bt->vscale = vscale;
+ btwrite_crop(bt);
+ btwrite_vdelay_lo(bt);
+ btwrite_vactive_lo(bt);
+ btwrite_hdelay_lo(bt);
+ btwrite_hscale_hi(bt);
+ btwrite_hscale_lo(bt);
+ btwrite_control(bt);
+ btwrite_vscale_hi(bt);
+ btwrite_vscale_lo(bt);
+ }
+}
+
+static void
+write_all(BT829Ptr bt)
+{
+ bt_reset(bt);
+ propagate_changes(bt); /* ensure consistency */
+ btwrite_iform(bt);
+ btwrite_tdec(bt);
+ btwrite_crop(bt);
+ btwrite_vdelay_lo(bt);
+ btwrite_vactive_lo(bt);
+ btwrite_hdelay_lo(bt);
+ btwrite_hactive_lo(bt);
+ btwrite_hscale_hi(bt);
+ btwrite_hscale_lo(bt);
+ btwrite_bright(bt);
+ btwrite_control(bt);
+ btwrite_contrast_lo(bt);
+ btwrite_sat_u_lo(bt);
+ btwrite_sat_v_lo(bt);
+ btwrite_hue(bt);
+ btwrite_scloop(bt);
+ btwrite_wc_up(bt);
+ btwrite_oform(bt);
+ btwrite_vscale_hi(bt);
+ btwrite_vscale_lo(bt);
+ btwrite_vpole(bt);
+ btwrite_adelay(bt);
+ btwrite_bdelay(bt);
+ btwrite_adc(bt);
+ btwrite_vtc(bt);
+ /* btwrite_cc_status(bt); *//* FIXME: CC code needs cleaning */
+ btwrite_wc_dn(bt);
+ btwrite_p_io(bt);
+}
+
+/*
+ * Public functions
+ */
+BT829Ptr
+bt829_Detect(I2CBusPtr b, I2CSlaveAddr addr)
+{
+ BT829Ptr bt;
+ I2CByte a;
+
+ bt = calloc(1, sizeof(BT829Rec));
+ if (bt == NULL)
+ return NULL;
+ bt->d.DevName = strdup("BT829 video decoder");
+ bt->d.SlaveAddr = addr;
+ bt->d.pI2CBus = b;
+ bt->d.NextDev = NULL;
+ bt->d.StartTimeout = b->StartTimeout;
+ bt->d.BitTimeout = b->BitTimeout;
+ bt->d.AcknTimeout = b->AcknTimeout;
+ bt->d.ByteTimeout = b->ByteTimeout;
+
+ if (!I2C_WriteRead(&(bt->d), NULL, 0, &a, 1)) {
+ free(bt);
+ return NULL;
+ }
+
+ bt->id = btread(bt, IDCODE);
+
+ free(bt->d.DevName);
+ bt->d.DevName = calloc(200, sizeof(char));
+ switch (BTVERSION) {
+ case BT815:
+ sprintf(bt->d.DevName, "bt815a video decoder, revision %d",
+ bt->id & 0xf);
+ break;
+ case BT817:
+ sprintf(bt->d.DevName, "bt817a video decoder, revision %d",
+ bt->id & 0xf);
+ break;
+ case BT819:
+ sprintf(bt->d.DevName, "bt819a video decoder, revision %d",
+ bt->id & 0xf);
+ break;
+ case BT827:
+ sprintf(bt->d.DevName, "bt827a/b video decoder, revision %d",
+ bt->id & 0xf);
+ break;
+ case BT829:
+ sprintf(bt->d.DevName, "bt829a/b video decoder, revision %d",
+ bt->id & 0xf);
+ break;
+ default:
+ sprintf(bt->d.DevName,
+ "bt8xx/unknown video decoder version %d, revision %d",
+ bt->id >> 4, bt->id & 0xf);
+ break;
+ }
+
+ /* set default parameters */
+ if (!I2CDevInit(&(bt->d))) {
+ free(bt);
+ return NULL;
+ }
+
+ bt->tunertype = 1;
+
+ bt->brightness = 0; /* hardware default */
+ bt->ccmode = 0;
+ bt->code = 0; /* hardware default */
+ bt->contrast = 216; /* hardware default */
+ bt->format = BT829_NTSC;
+ bt->height = 480; /* hardware default for vactive */
+ bt->hue = 0; /* hardware default */
+ bt->len = 1; /* hardware default */
+ bt->mux = BT829_MUX0; /* hardware default */
+ bt->out_en = 0; /* hardware default */
+ bt->p_io = 0; /* hardware default */
+ bt->sat_u = 254; /* hardware default */
+ bt->sat_v = 180; /* hardware default */
+ bt->vbien = 0; /* hardware default */
+ bt->vbifmt = 0; /* hardware default */
+ bt->width = 640; /* hardware default for hactive */
+
+ bt->hdelay = 120; /* hardware default */
+ bt->hscale = 684; /* hardware default */
+ bt->vactive = 480; /* hardware default */
+ bt->vdelay = 22; /* hardware default */
+ bt->vscale = 0; /* hardware default */
+
+ bt->htotal = 754; /* NTSC */
+ bt->svideo_mux = 0; /* no s-video */
+
+ return bt;
+}
+
+int
+bt829_ATIInit(BT829Ptr bt)
+{
+ bt->code = 1;
+ bt->len = 0;
+ bt->vbien = 1;
+ bt->vbifmt = 1;
+ bt->svideo_mux = BT829_MUX1;
+
+ write_all(bt);
+
+ return 0;
+}
+
+int
+bt829_SetFormat(BT829Ptr bt, CARD8 format)
+{
+ if ((format < 1) || (format > 7))
+ return -1;
+ if ((BTVERSION <= BT819) && (format != BT829_NTSC) && (format != BT829_PAL))
+ return -1;
+ if (format == bt->format)
+ return 0;
+ bt->format = format;
+ propagate_changes(bt);
+ btwrite_iform(bt);
+ btwrite_scloop(bt);
+ btwrite_adelay(bt);
+ btwrite_bdelay(bt);
+ btwrite_vtc(bt);
+ return 0;
+}
+
+int
+bt829_SetMux(BT829Ptr bt, CARD8 mux)
+{
+ if ((mux < 1) || (mux > 3))
+ return -1;
+ if (mux == bt->mux)
+ return 0;
+ bt->mux = mux;
+ /* propagate_changes(bt); *//* no dependencies */
+ btwrite_iform(bt);
+ btwrite_control(bt);
+ btwrite_adc(bt);
+ return 0;
+}
+
+void
+bt829_SetBrightness(BT829Ptr bt, int brightness)
+{
+ brightness = LIMIT(brightness, -1000, 999); /* ensure -128 <= brightness <= 127 below */
+ brightness = (128 * brightness) / 1000;
+ if (brightness == bt->brightness)
+ return;
+ bt->brightness = brightness;
+ /* propagate_changes(bt); *//* no dependencies */
+ btwrite_bright(bt);
+}
+
+void
+bt829_SetContrast(BT829Ptr bt, int contrast)
+{
+ contrast = LIMIT(contrast, -1000, 1000);
+ contrast = (216 * (contrast + 1000)) / 1000;
+ if (contrast == bt->contrast)
+ return;
+ bt->contrast = contrast;
+ /* propagate_changes(bt); *//* no dependencies */
+ btwrite_control(bt);
+ btwrite_contrast_lo(bt);
+}
+
+void
+bt829_SetSaturation(BT829Ptr bt, int saturation)
+{
+ CARD16 sat_u, sat_v;
+
+ saturation = LIMIT(saturation, -1000, 1000);
+ sat_u = (254 * (saturation + 1000)) / 1000;
+ sat_v = (180 * (saturation + 1000)) / 1000;
+ if ((sat_u == bt->sat_u) && (sat_v == bt->sat_v))
+ return;
+ bt->sat_u = sat_u;
+ bt->sat_v = sat_v;
+ /* propagate_changes(bt); *//* no dependencies */
+ btwrite_control(bt);
+ btwrite_sat_u_lo(bt);
+ btwrite_sat_v_lo(bt);
+}
+
+void
+bt829_SetTint(BT829Ptr bt, int hue)
+{
+ hue = LIMIT(hue, -1000, 999); /* ensure -128 <= hue <= 127 below */
+ hue = (128 * hue) / 1000;
+ if (hue == bt->hue)
+ return;
+ bt->hue = hue;
+ /* propagate_changes(bt); *//* no dependencies */
+ btwrite_hue(bt);
+}
+
+int
+bt829_SetCaptSize(BT829Ptr bt, int width, int height)
+{
+ if ((width > bt->htotal - 2 * HCROP) ||
+ (16 * width < bt->htotal - 32 * HCROP))
+ return -1;
+ if ((height > bt->vactive) || (16 * height < bt->vactive))
+ return -1;
+ if ((width == bt->width) && (height == bt->height))
+ return 0;
+ bt->width = width;
+ bt->height = height;
+ propagate_changes(bt);
+ btwrite_crop(bt);
+ btwrite_hactive_lo(bt);
+ btwrite_control(bt);
+ btwrite_vtc(bt);
+ return 0;
+}
+
+int
+bt829_SetCC(BT829Ptr bt)
+{ /* FIXME: should take ccmode as a parameter */
+ if (BTVERSION < BT827)
+ return -1; /* can't do it */
+ /* propagate_changes(bt); *//* no dependencies */
+ btwrite_cc_status(bt);
+ /* we write to STATUS to reset the CCVALID flag */
+ if (bt->ccmode != 0)
+ btwrite_status(bt);
+ return 0;
+}
+
+void
+bt829_SetOUT_EN(BT829Ptr bt, BOOL out_en)
+{
+ out_en = (out_en != 0);
+ if (out_en == bt->out_en)
+ return;
+ bt->out_en = out_en;
+ /* propagate_changes(bt); *//* no dependencies */
+ btwrite_vpole(bt);
+}
+
+void
+bt829_SetP_IO(BT829Ptr bt, CARD8 p_io)
+{
+ if (p_io == bt->p_io)
+ return;
+ bt->p_io = p_io;
+ /* propagate_changes(bt); *//* no dependencies */
+ btwrite_p_io(bt);
+}
+
+#define BTREAD(R) btread(bt,(R))
+
+#if 0
+
+void
+bt829_getCCdata(BT829Ptr bt, struct CCdata *data)
+{
+ CARD8 status;
+
+ data->num_valid = 0;
+ /* wait for buffer to be half full (means 8/16 bytes)
+ * either 4 (one of CC/EDS) or 2 (both CC/EDS) frames */
+ if (!(BTREAD(STATUS) & 0x04))
+ return; /* could comment this line */
+ for (; data->num_valid < CC_FIFO_SIZE; data->num_valid++) {
+ status = BTREAD(CC_STATUS);
+ if (!(status & 0x04))
+ break;
+ data->data[data->num_valid] = BTREAD(CC_DATA) & 0x7f;
+ /* stripped high bit (parity) */
+ data->status[data->num_valid] = (CCS_EDS * ((status & 0x02) >> 1)) |
+ (CCS_HIGH * (status & 0x01)) |
+ (CCS_OVER * ((status & 0x08) >> 3)) |
+ (CCS_PAR * ((status & 0x80) >> 7));
+ }
+ btwrite(bt, STATUS, 0x00); /* Reset CCVALID status bit */
+ return;
+}
+
+#endif
+
+/* ------------------------------------------------------------------------ */
+/* Debug and report routines */
+
+#define DUMPREG(REG) \
+ xf86DrvMsg(bt->d.pI2CBus->scrnIndex,X_INFO," %-12s (0x%02X) = 0x%02X\n", \
+ #REG,REG,BTREAD(REG))
+
+/*static void bt829_dumpregs(BT829Ptr bt)
+{
+ DUMPREG(STATUS);
+ DUMPREG(IFORM);
+ DUMPREG(TDEC);
+ DUMPREG(CROP);
+ DUMPREG(VDELAY_LO);
+ DUMPREG(VACTIVE_LO);
+ DUMPREG(HDELAY_LO);
+ DUMPREG(HACTIVE_LO);
+ DUMPREG(HSCALE_HI);
+ DUMPREG(HSCALE_LO);
+ DUMPREG(BRIGHT);
+ DUMPREG(CONTROL);
+ DUMPREG(CONTRAST_LO);
+ DUMPREG(SAT_U_LO);
+ DUMPREG(SAT_V_LO);
+ DUMPREG(HUE);
+ if (BTVERSION >= BT827) {
+ DUMPREG(SCLOOP);
+ DUMPREG(WC_UP) ; }
+ DUMPREG(OFORM);
+ DUMPREG(VSCALE_HI);
+ DUMPREG(VSCALE_LO);
+ DUMPREG(TEST);
+ DUMPREG(VPOLE);
+ DUMPREG(IDCODE);
+ DUMPREG(ADELAY);
+ DUMPREG(BDELAY);
+ DUMPREG(ADC);
+ if (BTVERSION >= BT827) {
+ DUMPREG(VTC);
+ DUMPREG(CC_STATUS);
+ DUMPREG(CC_DATA);
+ DUMPREG(WC_DN);
+ DUMPREG(P_IO) ; }
+}*/
diff --git a/xorg-server/hw/xfree86/i2c/bt829_module.c b/xorg-server/hw/xfree86/i2c/bt829_module.c
index 12801fbf3..c8a6ac6d1 100644
--- a/xorg-server/hw/xfree86/i2c/bt829_module.c
+++ b/xorg-server/hw/xfree86/i2c/bt829_module.c
@@ -1,21 +1,20 @@
-#ifdef HAVE_XORG_CONFIG_H
-#include <xorg-config.h>
-#endif
-
-#include "xf86Module.h"
-
-static XF86ModuleVersionInfo bt829VersRec =
-{
- "bt829",
- MODULEVENDORSTRING,
- MODINFOSTRING1,
- MODINFOSTRING2,
- XORG_VERSION_CURRENT,
- 1, 0, 0,
- ABI_CLASS_VIDEODRV, /* This needs the video driver ABI */
- ABI_VIDEODRV_VERSION,
- MOD_CLASS_NONE,
- {0,0,0,0}
-};
-
-_X_EXPORT XF86ModuleData bt829ModuleData = { &bt829VersRec, NULL, NULL };
+#ifdef HAVE_XORG_CONFIG_H
+#include <xorg-config.h>
+#endif
+
+#include "xf86Module.h"
+
+static XF86ModuleVersionInfo bt829VersRec = {
+ "bt829",
+ MODULEVENDORSTRING,
+ MODINFOSTRING1,
+ MODINFOSTRING2,
+ XORG_VERSION_CURRENT,
+ 1, 0, 0,
+ ABI_CLASS_VIDEODRV, /* This needs the video driver ABI */
+ ABI_VIDEODRV_VERSION,
+ MOD_CLASS_NONE,
+ {0, 0, 0, 0}
+};
+
+_X_EXPORT XF86ModuleData bt829ModuleData = { &bt829VersRec, NULL, NULL };
diff --git a/xorg-server/hw/xfree86/i2c/fi1236.c b/xorg-server/hw/xfree86/i2c/fi1236.c
index 0bc50e566..282fe7e34 100644
--- a/xorg-server/hw/xfree86/i2c/fi1236.c
+++ b/xorg-server/hw/xfree86/i2c/fi1236.c
@@ -15,38 +15,36 @@
#define NUM_TUNERS 8
-const FI1236_parameters tuner_parms[NUM_TUNERS] =
-{
+const FI1236_parameters tuner_parms[NUM_TUNERS] = {
/* 0 - FI1236 */
- { 733, 884, 12820, 2516, 7220, 0xA2, 0x94, 0x34, 0x8e },
+ {733, 884, 12820, 2516, 7220, 0xA2, 0x94, 0x34, 0x8e},
/* !!!based on documentation - it should be:
- {733, 16*55.25, 16*801.25, 16*160, 16*454, 0xA0, 0x90, 0x30, 0x8e},*/
+ {733, 16*55.25, 16*801.25, 16*160, 16*454, 0xA0, 0x90, 0x30, 0x8e}, */
/* 1 - FI1216 */
- { 623, 16*48.75, 16*855.25, 16*170, 16*450, 0xA0, 0x90, 0x30, 0x8e },
+ {623, 16 * 48.75, 16 * 855.25, 16 * 170, 16 * 450, 0xA0, 0x90, 0x30, 0x8e},
/* 2 - TEMIC FN5AL */
- { 623, 16*45.75, 16*855.25, 16*169, 16*454, 0xA0, 0x90, 0x30, 0x8e },
+ {623, 16 * 45.75, 16 * 855.25, 16 * 169, 16 * 454, 0xA0, 0x90, 0x30, 0x8e},
/* 3 - MT2032.. */
- { 733, 768, 13760, 0, 0, 0, 0, 0, 0 },
+ {733, 768, 13760, 0, 0, 0, 0, 0, 0},
/* 4 - FI1246 */
- { 623, 16*45.75, 16*855.25, 16*170, 16*450, 0xA0, 0x90, 0x30, 0x8e },
+ {623, 16 * 45.75, 16 * 855.25, 16 * 170, 16 * 450, 0xA0, 0x90, 0x30, 0x8e},
/* 5 - FI1256 */
- { 623, 16*49.75, 16*863.25, 16*170, 16*450, 0xA0, 0x90, 0x30, 0x8e },
+ {623, 16 * 49.75, 16 * 863.25, 16 * 170, 16 * 450, 0xA0, 0x90, 0x30, 0x8e},
/* 6 - FI1236W */
- /*{ 733, 884, 12820, 2516, 7220, 0x1, 0x2, 0x4, 0x8e },*/
- { 732, 16*55.25, 16*801.25, 16*160, 16*442, 0x1, 0x2, 0x4, 0x8e },
+ /*{ 733, 884, 12820, 2516, 7220, 0x1, 0x2, 0x4, 0x8e }, */
+ {732, 16 * 55.25, 16 * 801.25, 16 * 160, 16 * 442, 0x1, 0x2, 0x4, 0x8e},
/* 7 - FM1216ME */
- { 623, 16*48.25, 16*863.25, 16*158.00, 16*442.00, 0x1, 0x2, 0x4, 0x8e }
+ {623, 16 * 48.25, 16 * 863.25, 16 * 158.00, 16 * 442.00, 0x1, 0x2, 0x4, 0x8e}
};
-
FI1236Ptr
-Detect_FI1236 (I2CBusPtr b, I2CSlaveAddr addr)
+Detect_FI1236(I2CBusPtr b, I2CSlaveAddr addr)
{
FI1236Ptr f;
I2CByte a;
- f = calloc(1,sizeof(FI1236Rec));
+ f = calloc(1, sizeof(FI1236Rec));
if (f == NULL)
return NULL;
f->d.DevName = strdup("FI12xx Tuner");
@@ -57,10 +55,10 @@ Detect_FI1236 (I2CBusPtr b, I2CSlaveAddr addr)
f->d.BitTimeout = b->BitTimeout;
f->d.AcknTimeout = b->AcknTimeout;
f->d.ByteTimeout = b->ByteTimeout;
- f->type=TUNER_TYPE_FI1236;
- f->afc_timer_installed=FALSE;
- f->last_afc_hint=TUNER_OFF;
- f->video_if=45.7812;
+ f->type = TUNER_TYPE_FI1236;
+ f->afc_timer_installed = FALSE;
+ f->last_afc_hint = TUNER_OFF;
+ f->video_if = 45.7812;
if (!I2C_WriteRead(&(f->d), NULL, 0, &a, 1)) {
free(f);
@@ -75,7 +73,7 @@ Detect_FI1236 (I2CBusPtr b, I2CSlaveAddr addr)
}
static void
-MT2032_dump_parameters (FI1236Ptr f, MT2032_parameters *m)
+MT2032_dump_parameters(FI1236Ptr f, MT2032_parameters * m)
{
xf86DrvMsg(f->d.pI2CBus->scrnIndex, X_INFO,
"MT2032: input f_rf=%g f_if1=%g f_if2=%g f_ref=%g f_ifbw=%g f_step=%g\n",
@@ -86,15 +84,14 @@ MT2032_dump_parameters (FI1236Ptr f, MT2032_parameters *m)
m->f_lo1, m->f_lo2, m->LO1I, m->LO2I, m->SEL, m->STEP, m->NUM);
}
-
static void
-MT2032_getid (FI1236Ptr f)
+MT2032_getid(FI1236Ptr f)
{
CARD8 out[4];
CARD8 in;
in = 0x11;
- I2C_WriteRead(&(f->d), (I2CByte *)&in, 1, out, 4);
+ I2C_WriteRead(&(f->d), (I2CByte *) & in, 1, out, 4);
xf86DrvMsg(f->d.pI2CBus->scrnIndex, X_INFO,
"MT2032: Company code 0x%02x%02x, part code 0x%02x, revision code 0x%02x\n",
out[0], out[1], out[2], out[3]);
@@ -104,37 +101,37 @@ MT2032_getid (FI1236Ptr f)
/* might be buggy */
#if 0
static void
-MT2032_shutdown (FI1236Ptr f)
+MT2032_shutdown(FI1236Ptr f)
{
CARD8 data[10];
- data[0] = 0x00; /* start with register 0x00 */
+ data[0] = 0x00; /* start with register 0x00 */
data[1] = 0x1A;
data[2] = 0x44;
data[3] = 0x20;
- I2C_WriteRead(&(f->d), (I2CByte *)data, 4, NULL, 0);
+ I2C_WriteRead(&(f->d), (I2CByte *) data, 4, NULL, 0);
- data[0] = 0x05; /* now start with register 0x05 */
+ data[0] = 0x05; /* now start with register 0x05 */
data[1] = 0xD7;
data[2] = 0x14;
data[3] = 0x05;
- I2C_WriteRead(&(f->d), (I2CByte *)data, 4, NULL, 0);
+ I2C_WriteRead(&(f->d), (I2CByte *) data, 4, NULL, 0);
- data[0] = 0x0B; /* now start with register 0x05 */
+ data[0] = 0x0B; /* now start with register 0x05 */
data[1] = 0x8F;
data[2] = 0x07;
data[3] = 0x43;
- I2C_WriteRead(&(f->d), (I2CByte *)data, 4, NULL, 0);
+ I2C_WriteRead(&(f->d), (I2CByte *) data, 4, NULL, 0);
usleep(15000);
}
#endif
-static void MT2032_dump_status (FI1236Ptr f);
+static void MT2032_dump_status(FI1236Ptr f);
static void
-MT2032_init (FI1236Ptr f)
+MT2032_init(FI1236Ptr f)
{
CARD8 data[10];
CARD8 value;
@@ -142,31 +139,31 @@ MT2032_init (FI1236Ptr f)
MT2032_getid(f);
- data[0] = 0x02; /* start with register 0x02 */
+ data[0] = 0x02; /* start with register 0x02 */
data[1] = 0xFF;
data[2] = 0x0F;
data[3] = 0x1F;
- I2C_WriteRead(&(f->d), (I2CByte *)data, 4, NULL, 0);
+ I2C_WriteRead(&(f->d), (I2CByte *) data, 4, NULL, 0);
- data[0] = 0x06; /* now start with register 0x06 */
+ data[0] = 0x06; /* now start with register 0x06 */
data[1] = 0xE4;
data[2] = 0x8F;
data[3] = 0xC3;
data[4] = 0x4E;
data[5] = 0xEC;
- I2C_WriteRead(&(f->d), (I2CByte *)data, 6, NULL, 0);
+ I2C_WriteRead(&(f->d), (I2CByte *) data, 6, NULL, 0);
- data[0] = 0x0d; /* now start with register 0x0d */
+ data[0] = 0x0d; /* now start with register 0x0d */
data[1] = 0x32;
- I2C_WriteRead(&(f->d), (I2CByte *)data, 2, NULL, 0);
+ I2C_WriteRead(&(f->d), (I2CByte *) data, 2, NULL, 0);
while (1) {
- usleep(15000); /* wait 15 milliseconds */
+ usleep(15000); /* wait 15 milliseconds */
- data[0] = 0x0e; /* register number 7, status */
+ data[0] = 0x0e; /* register number 7, status */
value = 0xFF;
- if (!I2C_WriteRead(&(f->d), (I2CByte *)data, 1, &value, 1))
+ if (!I2C_WriteRead(&(f->d), (I2CByte *) data, 1, &value, 1))
xf86DrvMsg(f->d.pI2CBus->scrnIndex, X_INFO,
"MT2032: failed to read XOK\n");
xf86DrvMsg(f->d.pI2CBus->scrnIndex, X_INFO,
@@ -175,32 +172,33 @@ MT2032_init (FI1236Ptr f)
break;
data[0] = 0x07;
- if (!I2C_WriteRead(&(f->d), (I2CByte *)data, 1, &value, 1))
+ if (!I2C_WriteRead(&(f->d), (I2CByte *) data, 1, &value, 1))
xf86DrvMsg(f->d.pI2CBus->scrnIndex, X_INFO,
"MT2032: failed to read XOGC\n");
- xogc=value & 0x7;
+ xogc = value & 0x7;
if (xogc == 4)
- break; /* XOGC has reached 4.. stop */
+ break; /* XOGC has reached 4.. stop */
xogc--;
xf86DrvMsg(f->d.pI2CBus->scrnIndex, X_INFO,
"MT2032: try XOGC=%d\n", xogc);
usleep(15000);
- data[0] = 0x07; /* register number 7, control byte 2 */
+ data[0] = 0x07; /* register number 7, control byte 2 */
data[1] = 0x08 | xogc;
- I2C_WriteRead(&(f->d), (I2CByte *)data, 2, NULL, 0);
+ I2C_WriteRead(&(f->d), (I2CByte *) data, 2, NULL, 0);
}
f->xogc = xogc;
/* wait before continuing */
- usleep(15000); /* wait 50 milliseconds */
+ usleep(15000); /* wait 50 milliseconds */
MT2032_dump_status(f);
}
static int
-MT2032_no_spur_in_band (MT2032_parameters *m)
+MT2032_no_spur_in_band(MT2032_parameters * m)
{
int n_max, n1, n2;
double f_test;
+
n_max = 5;
n1 = 1;
while (1) {
@@ -233,10 +231,12 @@ MT2032_no_spur_in_band (MT2032_parameters *m)
}
static void
-MT2032_calculate_register_settings (MT2032_parameters *m, double f_rf,
- double f_if1, double f_if2, double f_ref, double f_ifbw, double f_step)
+MT2032_calculate_register_settings(MT2032_parameters * m, double f_rf,
+ double f_if1, double f_if2, double f_ref,
+ double f_ifbw, double f_step)
{
int n;
+
m->f_rf = f_rf;
m->f_if1 = f_if1;
m->f_if2 = f_if2;
@@ -244,7 +244,7 @@ MT2032_calculate_register_settings (MT2032_parameters *m, double f_rf,
m->f_ifbw = f_ifbw;
m->f_step = f_step;
- m->f_lo1 = f_rf+f_if1;
+ m->f_lo1 = f_rf + f_if1;
m->LO1I = lrint(m->f_lo1 / f_ref);
m->f_lo1 = f_ref * m->LO1I;
@@ -277,33 +277,33 @@ MT2032_calculate_register_settings (MT2032_parameters *m, double f_rf,
m->SEL = 2;
else if (m->f_lo1 < 1890.0)
m->SEL = 1;
- else /* m->f_lo1 < 1958.0 */
+ else /* m->f_lo1 < 1958.0 */
m->SEL = 0;
/* calculate the rest of the registers */
m->LO2I = floor(m->f_lo2 / f_ref);
m->STEP = floor(3780.0 * f_step / f_ref);
- m->NUM = floor(3780.0 * (m->f_lo2 / f_ref - m->LO2I));
- m->NUM = m->STEP * lrint((1.0 * m->NUM) / (1.0 * m->STEP));
+ m->NUM = floor(3780.0 * (m->f_lo2 / f_ref - m->LO2I));
+ m->NUM = m->STEP * lrint((1.0 * m->NUM) / (1.0 * m->STEP));
}
static int
-MT2032_wait_for_lock (FI1236Ptr f)
+MT2032_wait_for_lock(FI1236Ptr f)
{
int n;
CARD8 data[10];
CARD8 value;
- n=12;
- while(1) {
- data[0] = 0x0e; /* register number 7, status */
- I2C_WriteRead(&(f->d), (I2CByte *)data, 1, &value, 1);
- /* xf86DrvMsg(f->d.pI2CBus->scrnIndex, X_INFO,
- "MT2032: LO1LK=%d LO2LK=%d\n",
- (value & 0x04)>>2, (value & 0x02)>>1); */
- if ((value & 6)==6)
+ n = 12;
+ while (1) {
+ data[0] = 0x0e; /* register number 7, status */
+ I2C_WriteRead(&(f->d), (I2CByte *) data, 1, &value, 1);
+ /* xf86DrvMsg(f->d.pI2CBus->scrnIndex, X_INFO,
+ "MT2032: LO1LK=%d LO2LK=%d\n",
+ (value & 0x04)>>2, (value & 0x02)>>1); */
+ if ((value & 6) == 6)
break;
- usleep (1500);
+ usleep(1500);
n--;
if (n < 0)
break;
@@ -317,50 +317,50 @@ MT2032_wait_for_lock (FI1236Ptr f)
}
static void
-MT2032_implement_settings (FI1236Ptr f, MT2032_parameters *m)
+MT2032_implement_settings(FI1236Ptr f, MT2032_parameters * m)
{
CARD8 data[10];
CARD8 value;
- data[0] = 0x00; /* start with register 0x00 */
+ data[0] = 0x00; /* start with register 0x00 */
data[1] = (m->LO1I >> 3) - 1;
data[2] = (m->SEL << 4) | (m->LO1I & 0x7);
data[3] = 0x86;
- I2C_WriteRead(&(f->d), (I2CByte *)data, 4, NULL, 0);
+ I2C_WriteRead(&(f->d), (I2CByte *) data, 4, NULL, 0);
- data[0] = 0x05; /* start with register 0x05 */
+ data[0] = 0x05; /* start with register 0x05 */
data[1] = ((m->LO2I & 0x7) << 5) | ((m->LO2I >> 3) - 1);
if (m->f_rf < 400.0)
data[2] = 0xe4;
else
data[2] = 0xf4;
- I2C_WriteRead(&(f->d), (I2CByte *)data, 3, NULL, 0);
+ I2C_WriteRead(&(f->d), (I2CByte *) data, 3, NULL, 0);
- data[0] = 0x07; /* register number 7, control byte 2 */
- I2C_WriteRead(&(f->d), (I2CByte *)data, 1, &value, 1);
+ data[0] = 0x07; /* register number 7, control byte 2 */
+ I2C_WriteRead(&(f->d), (I2CByte *) data, 1, &value, 1);
xf86DrvMsg(f->d.pI2CBus->scrnIndex, X_INFO,
"MT2032: using XOGC=%d\n", (value & 0x07));
data[1] = 8 | (value & 0x7);
- I2C_WriteRead(&(f->d), (I2CByte *)data, 2, NULL, 0);
+ I2C_WriteRead(&(f->d), (I2CByte *) data, 2, NULL, 0);
- data[0] = 0x0b; /* start with register 0x0b */
+ data[0] = 0x0b; /* start with register 0x0b */
data[1] = m->NUM & 0xff;
- data[2] = (1<<7) | ((m->NUM >> 8) & 0x0f);
- I2C_WriteRead(&(f->d), (I2CByte *)data, 3, NULL, 0);
+ data[2] = (1 << 7) | ((m->NUM >> 8) & 0x0f);
+ I2C_WriteRead(&(f->d), (I2CByte *) data, 3, NULL, 0);
MT2032_wait_for_lock(f);
}
static void
-MT2032_optimize_VCO (FI1236Ptr f, MT2032_parameters *m)
+MT2032_optimize_VCO(FI1236Ptr f, MT2032_parameters * m)
{
CARD8 data[10];
CARD8 value;
CARD8 TAD1;
- data[0] = 0x0f; /* register number 7, status */
- I2C_WriteRead(&(f->d), (I2CByte *)data, 1, &value, 1);
- TAD1=value & 0x07;
+ data[0] = 0x0f; /* register number 7, status */
+ I2C_WriteRead(&(f->d), (I2CByte *) data, 1, &value, 1);
+ TAD1 = value & 0x07;
xf86DrvMsg(f->d.pI2CBus->scrnIndex, X_INFO,
"MT2032: TAD1=%d SEL=%d\n", TAD1, m->SEL);
if (TAD1 < 2)
@@ -369,25 +369,27 @@ MT2032_optimize_VCO (FI1236Ptr f, MT2032_parameters *m)
if (m->SEL == 0)
return;
m->SEL--;
- } else {
+ }
+ else {
if (m->SEL >= 4)
return;
m->SEL++;
}
- data[0] = 0x01; /* start with register 1 */
+ data[0] = 0x01; /* start with register 1 */
data[1] = (m->SEL << 4) | (m->LO1I & 0x7);
- I2C_WriteRead(&(f->d), (I2CByte *)data, 2, NULL, 0);
+ I2C_WriteRead(&(f->d), (I2CByte *) data, 2, NULL, 0);
}
static int
-FI1236_get_afc_hint (FI1236Ptr f)
+FI1236_get_afc_hint(FI1236Ptr f)
{
CARD8 out;
CARD8 AFC;
if ((f->type == TUNER_TYPE_FM1216ME) || (f->type == TUNER_TYPE_FI1236W)) {
- TDA9885Ptr t = (TDA9885Ptr)f->afc_source;
+ TDA9885Ptr t = (TDA9885Ptr) f->afc_source;
+
if (t == NULL)
return TUNER_OFF;
@@ -405,7 +407,8 @@ FI1236_get_afc_hint (FI1236Ptr f)
return TUNER_JUST_ABOVE;
else if (AFC == 0x0f)
return TUNER_TUNED;
- } else {
+ }
+ else {
I2C_WriteRead(&(f->d), NULL, 0, &out, 1);
AFC = out & 0x7;
xf86DrvMsg(f->d.pI2CBus->scrnIndex, X_INFO,
@@ -422,17 +425,18 @@ FI1236_get_afc_hint (FI1236Ptr f)
}
static int
-MT2032_get_afc_hint (FI1236Ptr f)
+MT2032_get_afc_hint(FI1236Ptr f)
{
CARD8 in;
CARD8 out[2];
CARD8 AFC;
+
in = 0x0e;
- I2C_WriteRead(&(f->d), (I2CByte *)&in, 1, out, 2);
+ I2C_WriteRead(&(f->d), (I2CByte *) & in, 1, out, 2);
AFC = (out[0] >> 4) & 0x7;
#if 0
xf86DrvMsg(f->d.pI2CBus->scrnIndex, X_INFO, "AFC=%d TAD1=%d TAD2=%d\n",
- AFC, out[1] & 0x7, (out[1]>>4)& 0x07);
+ AFC, out[1] & 0x7, (out[1] >> 4) & 0x07);
#endif
if (AFC == 2)
return TUNER_TUNED;
@@ -445,7 +449,7 @@ MT2032_get_afc_hint (FI1236Ptr f)
/* this function is for external use only */
int
-TUNER_get_afc_hint (FI1236Ptr f)
+TUNER_get_afc_hint(FI1236Ptr f)
{
if (f->afc_timer_installed)
return TUNER_STILL_TUNING;
@@ -453,7 +457,7 @@ TUNER_get_afc_hint (FI1236Ptr f)
}
static void
-MT2032_dump_status (FI1236Ptr f)
+MT2032_dump_status(FI1236Ptr f)
{
CARD8 in;
CARD8 out[2];
@@ -463,16 +467,16 @@ MT2032_dump_status (FI1236Ptr f)
CARD8 TAD2, TAD1;
in = 0x0e;
- I2C_WriteRead(&(f->d), (I2CByte *)&in, 1, out, 2);
+ I2C_WriteRead(&(f->d), (I2CByte *) & in, 1, out, 2);
XOK = out[0] & 1;
- LO1LK = (out[0] >> 2) & 1;
- LO2LK = (out[0] >> 1) & 1;
+ LO1LK = (out[0] >> 2) & 1;
+ LO2LK = (out[0] >> 1) & 1;
LDONrb = (out[0] >> 3) & 1;
- AFC = (out[0] >> 4) & 0x7;
+ AFC = (out[0] >> 4) & 0x7;
- TAD1 = (out[1] & 0x7);
- TAD2 = (out[1] >> 4) & 0x7;
+ TAD1 = (out[1] & 0x7);
+ TAD2 = (out[1] >> 4) & 0x7;
xf86DrvMsg(f->d.pI2CBus->scrnIndex, X_INFO,
"MT2032: status: XOK=%d LO1LK=%d LO2LK=%d LDONrb=%d AFC=%d TAD1=%d TAD2=%d\n",
@@ -480,12 +484,12 @@ MT2032_dump_status (FI1236Ptr f)
xf86DrvMsg(f->d.pI2CBus->scrnIndex, X_INFO,
"MT2032: status: OSCILLATOR:%s PLL1:%s PLL2:%s\n",
XOK ? "ok" : "off",
- LO1LK ? "locked" : "off",
- LO2LK ? "locked" : "off");
+ LO1LK ? "locked" : "off", LO2LK ? "locked" : "off");
}
-static void MT2032_tune(FI1236Ptr f, double freq, double step)
+static void
+MT2032_tune(FI1236Ptr f, double freq, double step)
{
MT2032_parameters m;
CARD8 data[10];
@@ -494,38 +498,41 @@ static void MT2032_tune(FI1236Ptr f, double freq, double step)
/* NTSC IF is 44mhz.. but 733/16=45.8125 and all TDAXXXX docs mention
45.75, 39, 58.75 and 30. */
#if 0
- MT2032_calculate_register_settings(&m, freq, 1090.0, 45.125, 5.25, 6.0, step);
- MT2032_calculate_register_settings(&m, freq, 1090.0, 45.74, 5.25, 6.0, step);
+ MT2032_calculate_register_settings(&m, freq, 1090.0, 45.125, 5.25, 6.0,
+ step);
+ MT2032_calculate_register_settings(&m, freq, 1090.0, 45.74, 5.25, 6.0,
+ step);
#endif
- MT2032_calculate_register_settings(&m, freq, 1090.0, f->video_if, 5.25, 3.0, step);
+ MT2032_calculate_register_settings(&m, freq, 1090.0, f->video_if, 5.25, 3.0,
+ step);
MT2032_dump_parameters(f, &m);
MT2032_implement_settings(f, &m);
- /* MT2032_dump_parameters(f, &m); */
+ /* MT2032_dump_parameters(f, &m); */
for (i = 0; i < 3; i++) {
MT2032_optimize_VCO(f, &m);
if (MT2032_wait_for_lock(f)) {
- data[0] = 0x02; /* LO Gain control register 0x02 */
+ data[0] = 0x02; /* LO Gain control register 0x02 */
data[1] = 0x20;
- I2C_WriteRead(&(f->d), (I2CByte *)data, 2, NULL, 0);
+ I2C_WriteRead(&(f->d), (I2CByte *) data, 2, NULL, 0);
return;
}
data[0] = 0x07;
data[1] = 0x88 | f->xogc;
- I2C_WriteRead(&(f->d), (I2CByte *)data, 2, NULL, 0);
+ I2C_WriteRead(&(f->d), (I2CByte *) data, 2, NULL, 0);
usleep(15000);
data[1] = 0x08 | f->xogc;
- I2C_WriteRead(&(f->d), (I2CByte *)data, 2, NULL, 0);
+ I2C_WriteRead(&(f->d), (I2CByte *) data, 2, NULL, 0);
}
xf86DrvMsg(f->d.pI2CBus->scrnIndex, X_INFO,
"MT2032: failed to set frequency\n");
}
void
-FI1236_set_tuner_type (FI1236Ptr f, int type)
+FI1236_set_tuner_type(FI1236Ptr f, int type)
{
f->type = type;
if (type >= NUM_TUNERS)
- type = NUM_TUNERS-1;
+ type = NUM_TUNERS - 1;
if (type < 0)
type = 0;
memcpy(&(f->parm), &(tuner_parms[type]), sizeof(FI1236_parameters));
@@ -537,11 +544,11 @@ FI1236_set_tuner_type (FI1236Ptr f, int type)
}
}
-
static CARD32
AFC_TimerCallback(OsTimerPtr timer, CARD32 time, pointer data)
{
- FI1236Ptr f = (FI1236Ptr)data;
+ FI1236Ptr f = (FI1236Ptr) data;
+
if (FI1236_AFC(f))
return 150;
else {
@@ -557,12 +564,14 @@ FI1236_tune(FI1236Ptr f, CARD32 frequency)
CARD16 divider;
CARD8 data;
- if (frequency < f->parm.min_freq) frequency = f->parm.min_freq;
- if (frequency > f->parm.max_freq) frequency = f->parm.max_freq;
+ if (frequency < f->parm.min_freq)
+ frequency = f->parm.min_freq;
+ if (frequency > f->parm.max_freq)
+ frequency = f->parm.max_freq;
- divider = (f->parm.fcar + (CARD16)frequency) & 0x7fff;
- f->tuner_data.div1 = (CARD8)((divider >> 8)&0x7f);
- f->tuner_data.div2 = (CARD8)(divider & 0xff);
+ divider = (f->parm.fcar + (CARD16) frequency) & 0x7fff;
+ f->tuner_data.div1 = (CARD8) ((divider >> 8) & 0x7f);
+ f->tuner_data.div2 = (CARD8) (divider & 0xff);
f->tuner_data.control = f->parm.control;
if (frequency < f->parm.threshold1)
@@ -576,41 +585,42 @@ FI1236_tune(FI1236Ptr f, CARD32 frequency)
"Setting tuner band to %d\n", f->tuner_data.band);
xf86DrvMsg(f->d.pI2CBus->scrnIndex, X_INFO,
- "Setting tuner frequency to %d\n", (int)frequency);
+ "Setting tuner frequency to %d\n", (int) frequency);
if ((f->type == TUNER_TYPE_FM1216ME) || (f->type == TUNER_TYPE_FI1236W)) {
f->tuner_data.aux = 0x20;
- I2C_WriteRead(&(f->d), (I2CByte *)&(f->tuner_data), 5, NULL, 0);
+ I2C_WriteRead(&(f->d), (I2CByte *) & (f->tuner_data), 5, NULL, 0);
I2C_WriteRead(&(f->d), NULL, 0, &data, 1);
xf86DrvMsg(f->d.pI2CBus->scrnIndex, X_INFO, "Tuner status %x\n", data);
}
else
- I2C_WriteRead(&(f->d), (I2CByte *)&(f->tuner_data), 4, NULL, 0);
+ I2C_WriteRead(&(f->d), (I2CByte *) & (f->tuner_data), 4, NULL, 0);
}
void
TUNER_set_frequency(FI1236Ptr f, CARD32 frequency)
{
- if (frequency < f->parm.min_freq) frequency = f->parm.min_freq;
- if (frequency > f->parm.max_freq) frequency = f->parm.max_freq;
+ if (frequency < f->parm.min_freq)
+ frequency = f->parm.min_freq;
+ if (frequency > f->parm.max_freq)
+ frequency = f->parm.max_freq;
- f->afc_delta=0;
- f->original_frequency=frequency;
+ f->afc_delta = 0;
+ f->original_frequency = frequency;
if (f->type == TUNER_TYPE_MT2032)
- MT2032_tune(f, (1.0*frequency)/16.0, 0.0625);
+ MT2032_tune(f, (1.0 * frequency) / 16.0, 0.0625);
else
FI1236_tune(f, frequency);
if (!f->afc_timer_installed) {
- f->afc_timer_installed=TRUE;
+ f->afc_timer_installed = TRUE;
/* RegisterBlockAndWakeupHandlers(FI1236_BlockHandler, AFCWakeup, f); */
TimerSet(NULL, 0, 300, AFC_TimerCallback, f);
}
}
-
int
FI1236_AFC(FI1236Ptr f)
{
@@ -637,12 +647,13 @@ FI1236_AFC(FI1236Ptr f)
"AFC: Setting tuner frequency to %g\n",
(0.5 * (2 * f->original_frequency + f->afc_delta)) / 16.0);
MT2032_tune(f,
- (1.0 * f->original_frequency+ 0.5 * f->afc_delta) / 16.0,
+ (1.0 * f->original_frequency + 0.5 * f->afc_delta) / 16.0,
0.03125);
if (f->last_afc_hint == TUNER_OFF)
return 0;
- return 1; /* call me again */
- } else {
+ return 1; /* call me again */
+ }
+ else {
f->last_afc_hint = FI1236_get_afc_hint(f);
if (f->last_afc_hint == TUNER_TUNED) {
xf86DrvMsg(f->d.pI2CBus->scrnIndex, X_INFO, "AFC: TUNER_TUNNED\n");
@@ -652,9 +663,9 @@ FI1236_AFC(FI1236Ptr f)
f->last_afc_hint = TUNER_OFF;
if (f->last_afc_hint == TUNER_OFF)
- f->afc_delta=0;
+ f->afc_delta = 0;
else
- f->afc_delta+=f->last_afc_hint;
+ f->afc_delta += f->last_afc_hint;
xf86DrvMsg(f->d.pI2CBus->scrnIndex, X_INFO,
"AFC: Setting tuner frequency to %g\n",
@@ -662,9 +673,9 @@ FI1236_AFC(FI1236Ptr f)
FI1236_tune(f, f->original_frequency + f->afc_delta);
if (f->last_afc_hint == TUNER_OFF)
return 0;
- return 1; /* call me again */
+ return 1; /* call me again */
}
- return 0; /* done */
+ return 0; /* done */
}
void
diff --git a/xorg-server/hw/xfree86/i2c/fi1236_module.c b/xorg-server/hw/xfree86/i2c/fi1236_module.c
index 7375e0fb9..2f453d964 100644
--- a/xorg-server/hw/xfree86/i2c/fi1236_module.c
+++ b/xorg-server/hw/xfree86/i2c/fi1236_module.c
@@ -1,25 +1,24 @@
-#ifdef HAVE_XORG_CONFIG_H
-#include <xorg-config.h>
-#endif
-
-#include "xf86Module.h"
-
-static XF86ModuleVersionInfo fi1236VersRec =
-{
- "fi1236",
- MODULEVENDORSTRING,
- MODINFOSTRING1,
- MODINFOSTRING2,
- XORG_VERSION_CURRENT,
- 1, 0, 0,
- ABI_CLASS_VIDEODRV, /* This needs the video driver ABI */
- ABI_VIDEODRV_VERSION,
- MOD_CLASS_NONE,
- {0,0,0,0}
-};
-
-_X_EXPORT XF86ModuleData fi1236ModuleData = {
- &fi1236VersRec,
- NULL,
- NULL
-};
+#ifdef HAVE_XORG_CONFIG_H
+#include <xorg-config.h>
+#endif
+
+#include "xf86Module.h"
+
+static XF86ModuleVersionInfo fi1236VersRec = {
+ "fi1236",
+ MODULEVENDORSTRING,
+ MODINFOSTRING1,
+ MODINFOSTRING2,
+ XORG_VERSION_CURRENT,
+ 1, 0, 0,
+ ABI_CLASS_VIDEODRV, /* This needs the video driver ABI */
+ ABI_VIDEODRV_VERSION,
+ MOD_CLASS_NONE,
+ {0, 0, 0, 0}
+};
+
+_X_EXPORT XF86ModuleData fi1236ModuleData = {
+ &fi1236VersRec,
+ NULL,
+ NULL
+};
diff --git a/xorg-server/hw/xfree86/i2c/msp3430.c b/xorg-server/hw/xfree86/i2c/msp3430.c
index df8adc435..312a2d1d1 100644
--- a/xorg-server/hw/xfree86/i2c/msp3430.c
+++ b/xorg-server/hw/xfree86/i2c/msp3430.c
@@ -16,11 +16,10 @@
#define WR_DSP 0x12
#define RD_DSP 0x13
-
void InitMSP34xxG(MSP3430Ptr m);
void InitMSP34x5D(MSP3430Ptr m);
void CheckModeMSP34x5D(MSP3430Ptr m);
-static const char *MSP_getProductName (CARD16 product_id);
+static const char *MSP_getProductName(CARD16 product_id);
void mpause(int milliseconds);
#define __MSPDEBUG__ 0
@@ -28,275 +27,296 @@ void mpause(int milliseconds);
#if __MSPDEBUG__ > 3
void MSPBeep(MSP3430Ptr m, CARD8 freq);
+
#define __MSPBEEP MSPBeep(m,0x14);
#else
-#define __MSPBEEP
+#define __MSPBEEP
#endif
-static void SetMSP3430Control(MSP3430Ptr m, CARD8 RegAddress, CARD8 RegValueHigh, CARD8 RegValueLow)
+static void
+SetMSP3430Control(MSP3430Ptr m, CARD8 RegAddress, CARD8 RegValueHigh,
+ CARD8 RegValueLow)
{
- I2CByte data[3];
-
- data[0]=RegAddress;
- data[1]=RegValueHigh;
- data[2]=RegValueLow;
-
- I2C_WriteRead(&(m->d),data,3,NULL,0);
+ I2CByte data[3];
+
+ data[0] = RegAddress;
+ data[1] = RegValueHigh;
+ data[2] = RegValueLow;
+
+ I2C_WriteRead(&(m->d), data, 3, NULL, 0);
}
-static void SetMSP3430Data(MSP3430Ptr m, CARD8 RegAddress, CARD8 RegSubAddressHigh, CARD8 RegSubAddressLow,
- CARD8 RegValueHigh, CARD8 RegValueLow)
+static void
+SetMSP3430Data(MSP3430Ptr m, CARD8 RegAddress, CARD8 RegSubAddressHigh,
+ CARD8 RegSubAddressLow, CARD8 RegValueHigh, CARD8 RegValueLow)
{
- I2CByte data[5];
+ I2CByte data[5];
+
#ifdef MSP_DEBUG
- if(!m->registers_present[RegSubAddressLow]){
- xf86DrvMsg(m->d.pI2CBus->scrnIndex,X_ERROR, "Attempt to access non-existent register in MSP34xxX: 0x%02x 0x%02x 0x%02x <- 0x%02x 0x%02x\n",
- RegAddress, RegSubAddressHigh, RegSubAddressLow, RegValueHigh, RegValueLow);
- }
+ if (!m->registers_present[RegSubAddressLow]) {
+ xf86DrvMsg(m->d.pI2CBus->scrnIndex, X_ERROR,
+ "Attempt to access non-existent register in MSP34xxX: 0x%02x 0x%02x 0x%02x <- 0x%02x 0x%02x\n",
+ RegAddress, RegSubAddressHigh, RegSubAddressLow,
+ RegValueHigh, RegValueLow);
+ }
#endif
-
- data[0] = RegAddress;
- data[1] = RegSubAddressHigh;
- data[2] = RegSubAddressLow;
- data[3] = RegValueHigh;
- data[4] = RegValueLow;
-
- I2C_WriteRead(&(m->d),data,5,NULL,0);
+
+ data[0] = RegAddress;
+ data[1] = RegSubAddressHigh;
+ data[2] = RegSubAddressLow;
+ data[3] = RegValueHigh;
+ data[4] = RegValueLow;
+
+ I2C_WriteRead(&(m->d), data, 5, NULL, 0);
}
-static void GetMSP3430Data(MSP3430Ptr m, CARD8 RegAddress, CARD8 RegSubAddressHigh, CARD8 RegSubAddressLow,
- CARD8 *RegValueHigh, CARD8 *RegValueLow)
+static void
+GetMSP3430Data(MSP3430Ptr m, CARD8 RegAddress, CARD8 RegSubAddressHigh,
+ CARD8 RegSubAddressLow, CARD8 *RegValueHigh, CARD8 *RegValueLow)
{
- I2CByte send[3];
- I2CByte receive[2];
-
- send[0] = RegAddress;
- send[1] = RegSubAddressHigh;
- send[2] = RegSubAddressLow;
-
- I2C_WriteRead(&(m->d), send, 3, receive, 2);
-
- *RegValueHigh = receive[0];
- *RegValueLow = receive[1];
+ I2CByte send[3];
+ I2CByte receive[2];
+
+ send[0] = RegAddress;
+ send[1] = RegSubAddressHigh;
+ send[2] = RegSubAddressLow;
+
+ I2C_WriteRead(&(m->d), send, 3, receive, 2);
+
+ *RegValueHigh = receive[0];
+ *RegValueLow = receive[1];
}
#if __MSPDEBUG__ > 2
-static void MSP3430DumpStatus(MSP3430Ptr m)
+static void
+MSP3430DumpStatus(MSP3430Ptr m)
{
-CARD8 status_hi, status_lo;
-CARD8 subaddr, data[2];
-
-GetMSP3430Data(m, RD_DEM, 0x02, 0x00, &status_hi, &status_lo);
-xf86DrvMsg(m->d.pI2CBus->scrnIndex, X_INFO, "MSP34xx: SAP(8)=%d mono/NICAM(7)=%d stereo=%d %s O_1=%d O_0=%d 2nd car=%d 1st car=%d\n",
- status_hi & 1, (status_lo>>7) & 1, (status_lo>>6)&1,
- (status_lo>>5)? ( (status_hi>>1)&1? "bad NICAM reception" : "NICAM" ) :
- ((status_hi>>1)&1 ? "bogus" : "ANALOG FM/AM") ,
- (status_lo>>4)&1, (status_lo>>3)&1,!( (status_lo>>2)&1), !((status_lo>>1)&1));
-
-GetMSP3430Data(m, RD_DEM, 0x00, 0x7E, &status_hi, &status_lo);
-xf86DrvMsg(m->d.pI2CBus->scrnIndex, X_INFO, "MSP34xx: standard result=0x%02x%02x\n",
- status_hi, status_lo);
-subaddr=0x0;
-I2C_WriteRead(&(m->d), &subaddr, 1, data, 2);
-xf86DrvMsg(m->d.pI2CBus->scrnIndex, X_INFO, "MSP34xx: control=0x%02x%02x\n",
- data[1], data[0]);
+ CARD8 status_hi, status_lo;
+ CARD8 subaddr, data[2];
+
+ GetMSP3430Data(m, RD_DEM, 0x02, 0x00, &status_hi, &status_lo);
+ xf86DrvMsg(m->d.pI2CBus->scrnIndex, X_INFO,
+ "MSP34xx: SAP(8)=%d mono/NICAM(7)=%d stereo=%d %s O_1=%d O_0=%d 2nd car=%d 1st car=%d\n",
+ status_hi & 1, (status_lo >> 7) & 1, (status_lo >> 6) & 1,
+ (status_lo >> 5) ? ((status_hi >> 1) & 1 ? "bad NICAM reception"
+ : "NICAM") : ((status_hi >> 1) & 1 ? "bogus"
+ : "ANALOG FM/AM"),
+ (status_lo >> 4) & 1, (status_lo >> 3) & 1,
+ !((status_lo >> 2) & 1), !((status_lo >> 1) & 1));
+
+ GetMSP3430Data(m, RD_DEM, 0x00, 0x7E, &status_hi, &status_lo);
+ xf86DrvMsg(m->d.pI2CBus->scrnIndex, X_INFO,
+ "MSP34xx: standard result=0x%02x%02x\n", status_hi, status_lo);
+ subaddr = 0x0;
+ I2C_WriteRead(&(m->d), &subaddr, 1, data, 2);
+ xf86DrvMsg(m->d.pI2CBus->scrnIndex, X_INFO, "MSP34xx: control=0x%02x%02x\n",
+ data[1], data[0]);
}
#endif
/* wrapper */
-void InitMSP3430(MSP3430Ptr m)
+void
+InitMSP3430(MSP3430Ptr m)
{
- #if __MSPDEBUG__ > 1
- xf86DrvMsg(m->d.pI2CBus->scrnIndex,X_INFO,"InitMSP3430(m->connector=%d, m->standard=%d, m->chip_family=%d)\n",
- m->connector, m->standard, m->chip_family);
- #endif
- switch (m->chip_family) {
- case MSPFAMILY_34x0G:
- InitMSP34xxG(m);
- break;
- case MSPFAMILY_34x5G:
- InitMSP34xxG(m);
- break;
- case MSPFAMILY_34x5D:
- InitMSP34x5D(m);
- break;
- }
+#if __MSPDEBUG__ > 1
+ xf86DrvMsg(m->d.pI2CBus->scrnIndex, X_INFO,
+ "InitMSP3430(m->connector=%d, m->standard=%d, m->chip_family=%d)\n",
+ m->connector, m->standard, m->chip_family);
+#endif
+ switch (m->chip_family) {
+ case MSPFAMILY_34x0G:
+ InitMSP34xxG(m);
+ break;
+ case MSPFAMILY_34x5G:
+ InitMSP34xxG(m);
+ break;
+ case MSPFAMILY_34x5D:
+ InitMSP34x5D(m);
+ break;
+ }
}
/*-----------------------------------------------------------------
| common functions for all MSP34xx chips
|----------------------------------------------------------------*/
-MSP3430Ptr DetectMSP3430(I2CBusPtr b, I2CSlaveAddr addr)
+MSP3430Ptr
+DetectMSP3430(I2CBusPtr b, I2CSlaveAddr addr)
{
- MSP3430Ptr m;
- I2CByte a;
- CARD8 hardware_version, major_revision, product_code, rom_version;
- Bool supported;
-
- m = calloc(1,sizeof(MSP3430Rec));
- if(m == NULL)return NULL;
- m->d.DevName = strdup("MSP34xx");
- m->d.SlaveAddr = addr;
- m->d.pI2CBus = b;
- m->d.NextDev = NULL;
- m->d.StartTimeout = b->StartTimeout;
- m->d.BitTimeout = b->BitTimeout;
- m->d.AcknTimeout = b->AcknTimeout;
- m->d.ByteTimeout = b->ByteTimeout;
-
- if(!I2C_WriteRead(&(m->d), NULL, 0, &a, 1))
- {
- free(m->d.DevName);
- free(m);
- return NULL;
+ MSP3430Ptr m;
+ I2CByte a;
+ CARD8 hardware_version, major_revision, product_code, rom_version;
+ Bool supported;
+
+ m = calloc(1, sizeof(MSP3430Rec));
+ if (m == NULL)
+ return NULL;
+ m->d.DevName = strdup("MSP34xx");
+ m->d.SlaveAddr = addr;
+ m->d.pI2CBus = b;
+ m->d.NextDev = NULL;
+ m->d.StartTimeout = b->StartTimeout;
+ m->d.BitTimeout = b->BitTimeout;
+ m->d.AcknTimeout = b->AcknTimeout;
+ m->d.ByteTimeout = b->ByteTimeout;
+
+ if (!I2C_WriteRead(&(m->d), NULL, 0, &a, 1)) {
+ free(m->d.DevName);
+ free(m);
+ return NULL;
+ }
+
+ m->standard = MSP3430_NTSC;
+ m->connector = MSP3430_CONNECTOR_1;
+ m->mode = MSPMODE_STEREO_A; /*stereo or chanel A if avail. */
+ m->c_format = MSPFORMAT_UNKNOWN;
+ m->c_standard = MSPSTANDARD_UNKNOWN;
+ m->c_matrix = m->c_fmmatrix = m->c_source = 0;
+ m->volume = 0;
+ m->recheck = FALSE;
+
+ GetMSP3430Data(m, RD_DSP, 0x00, 0x1E, &hardware_version, &major_revision);
+ GetMSP3430Data(m, RD_DSP, 0x00, 0x1F, &product_code, &rom_version);
+ m->hardware_version = hardware_version;
+ m->major_revision = major_revision;
+ m->product_code = product_code;
+ m->rom_version = rom_version;
+
+ m->chip_id = ((major_revision << 8) | product_code);
+
+ supported = FALSE;
+ switch (major_revision) {
+ case 4: /* 34xxD */
+ switch (product_code) {
+ case 0x05: /* 3405D */
+ case 0x0A: /* 3410D */
+ case 0x0F: /* 3415D */
+ m->chip_family = MSPFAMILY_34x5D;
+ m->recheck = TRUE;
+ supported = TRUE;
+ break;
+ default:
+ m->chip_family = MSPFAMILY_34x0D;
+ }
+ break;
+ case 7: /* 34xxG */
+ switch (product_code) {
+ case 0x00:
+ case 0x0A:
+ case 0x1E:
+ case 0x28:
+ case 0x32:
+ m->chip_family = MSPFAMILY_34x0G;
+ supported = TRUE;
+ break;
+ case 0x0f:
+ case 0x19:
+ case 0x2d:
+ case 0x37:
+ case 0x41:
+ m->chip_family = MSPFAMILY_34x5G;
+ supported = TRUE;
+#ifdef MSP_DEBUG
+ memset(m->registers_present, 0, 256);
+#define A(num) m->registers_present[(num)]=1;
+#define B(num1, num2) memset(&(m->registers_present[num1]), 1, num2-num1);
+ A(0x20)
+ A(0x30)
+ A(0x40)
+ A(0x00)
+ B(0x01, 0x08)
+ B(0x0B, 0x0E)
+ A(0x10)
+ B(0x12, 0x14)
+ A(0x16)
+ A(0x29)
+#undef B
+#undef A
+#endif
+ break;
+ default:
+ m->chip_family = MSPFAMILY_UNKNOWN;
+ }
+ break;
+ default:
+ m->chip_family = MSPFAMILY_UNKNOWN;
}
+ xf86DrvMsg(m->d.pI2CBus->scrnIndex, X_INFO,
+ "Found %s%s, rom version 0x%02x, chip_id=0x%04x\n",
+ MSP_getProductName(m->chip_id),
+ supported ? "" : " (unsupported)", rom_version, m->chip_id);
- m->standard=MSP3430_NTSC;
- m->connector=MSP3430_CONNECTOR_1;
- m->mode=MSPMODE_STEREO_A; /*stereo or chanel A if avail. */
- m->c_format=MSPFORMAT_UNKNOWN;
- m->c_standard=MSPSTANDARD_UNKNOWN;
- m->c_matrix=m->c_fmmatrix=m->c_source=0;
- m->volume=0;
- m->recheck=FALSE;
-
- GetMSP3430Data(m, RD_DSP, 0x00, 0x1E, &hardware_version, &major_revision);
- GetMSP3430Data(m, RD_DSP, 0x00, 0x1F, &product_code, &rom_version);
- m->hardware_version=hardware_version;
- m->major_revision=major_revision;
- m->product_code=product_code;
- m->rom_version=rom_version;
-
- m->chip_id=((major_revision << 8) | product_code);
-
- supported=FALSE;
- switch (major_revision) {
- case 4: /* 34xxD */
- switch (product_code) {
- case 0x05: /* 3405D */
- case 0x0A: /* 3410D */
- case 0x0F: /* 3415D */
- m->chip_family=MSPFAMILY_34x5D;
- m->recheck=TRUE;
- supported=TRUE;
- break;
- default:
- m->chip_family=MSPFAMILY_34x0D;
- }
- break;
- case 7: /* 34xxG */
- switch(product_code){
- case 0x00:
- case 0x0A:
- case 0x1E:
- case 0x28:
- case 0x32:
- m->chip_family=MSPFAMILY_34x0G;
- supported=TRUE;
- break;
- case 0x0f:
- case 0x19:
- case 0x2d:
- case 0x37:
- case 0x41:
- m->chip_family=MSPFAMILY_34x5G;
- supported=TRUE;
- #ifdef MSP_DEBUG
- memset(m->registers_present, 0, 256);
- #define A(num) m->registers_present[(num)]=1;
- #define B(num1, num2) memset(&(m->registers_present[num1]), 1, num2-num1);
- A(0x20)
- A(0x30)
- A(0x40)
- A(0x00)
- B(0x01, 0x08)
- B(0x0B, 0x0E)
- A(0x10)
- B(0x12,0x14)
- A(0x16)
- A(0x29)
- #undef B
- #undef A
- #endif
- break;
- default:
- m->chip_family=MSPFAMILY_UNKNOWN;
- }
- break;
- default:
- m->chip_family=MSPFAMILY_UNKNOWN;
- }
-
- xf86DrvMsg(m->d.pI2CBus->scrnIndex, X_INFO, "Found %s%s, rom version 0x%02x, chip_id=0x%04x\n",
- MSP_getProductName(m->chip_id), supported?"":" (unsupported)", rom_version, m->chip_id);
-
- if (!supported) {
- free(m->d.DevName);
- free(m);
- return NULL;
- }
- if(!I2CDevInit(&(m->d)))
- {
- free(m->d.DevName);
- free(m);
- return NULL;
- }
-
- return m;
+ if (!supported) {
+ free(m->d.DevName);
+ free(m);
+ return NULL;
+ }
+ if (!I2CDevInit(&(m->d))) {
+ free(m->d.DevName);
+ free(m);
+ return NULL;
+ }
+
+ return m;
}
-void ResetMSP3430(MSP3430Ptr m)
+void
+ResetMSP3430(MSP3430Ptr m)
{
/* Reset the MSP3430 */
SetMSP3430Control(m, 0x00, 0x80, 0x00);
/* Set it back to normal operation */
SetMSP3430Control(m, 0x00, 0x00, 0x00);
- m->c_format=MSPFORMAT_UNKNOWN;
- m->c_standard=MSPSTANDARD_UNKNOWN;
- m->c_matrix=m->c_fmmatrix=m->c_source=0;
- m->volume=0;
-}
+ m->c_format = MSPFORMAT_UNKNOWN;
+ m->c_standard = MSPSTANDARD_UNKNOWN;
+ m->c_matrix = m->c_fmmatrix = m->c_source = 0;
+ m->volume = 0;
+}
-void MSP3430SetVolume (MSP3430Ptr m, CARD8 value)
+void
+MSP3430SetVolume(MSP3430Ptr m, CARD8 value)
{
CARD8 result;
+
#if 0
CARD8 old_volume;
- GetMSP3430Data(m, RD_DSP, 0x00, 0x00, &old_volume, &result);
- xf86DrvMsg(m->d.pI2CBus->scrnIndex, X_INFO, "MSP3430 result 0x%02x\n", result);
+
+ GetMSP3430Data(m, RD_DSP, 0x00, 0x00, &old_volume, &result);
+ xf86DrvMsg(m->d.pI2CBus->scrnIndex, X_INFO, "MSP3430 result 0x%02x\n",
+ result);
#endif
/* save an extra Get call */
- result=0;
+ result = 0;
SetMSP3430Data(m, WR_DSP, 0x00, 0x00, value, result);
SetMSP3430Data(m, WR_DSP, 0x00, 0x07, value, 0);
- m->volume=value;
+ m->volume = value;
#if __MSPDEBUG__ > 2
- MSP3430DumpStatus(m);
- __MSPBEEP
- GetMSP3430Data(m, RD_DSP, 0x00, 0x00, &old_volume, &result);
- xf86DrvMsg(m->d.pI2CBus->scrnIndex, X_INFO, "MSP3430 volume 0x%02x\n",value);
+ MSP3430DumpStatus(m);
+ __MSPBEEP GetMSP3430Data(m, RD_DSP, 0x00, 0x00, &old_volume, &result);
+ xf86DrvMsg(m->d.pI2CBus->scrnIndex, X_INFO, "MSP3430 volume 0x%02x\n",
+ value);
#endif
}
-
-void MSP3430SetSAP (MSP3430Ptr m, int mode)
+void
+MSP3430SetSAP(MSP3430Ptr m, int mode)
{
- xf86DrvMsg(m->d.pI2CBus->scrnIndex, X_INFO, "Put actual code to change SAP here\n");
+ xf86DrvMsg(m->d.pI2CBus->scrnIndex, X_INFO,
+ "Put actual code to change SAP here\n");
- SetMSP3430Data(m, WR_DSP, 0x00, 0x08, mode & 0xff, 0x20);
+ SetMSP3430Data(m, WR_DSP, 0x00, 0x08, mode & 0xff, 0x20);
}
-
#if 0
-void MSP3430SetSource(MSP3430Ptr m, CARD8 value)
+void
+MSP3430SetSource(MSP3430Ptr m, CARD8 value)
{
/* Write to DSP, register 0x0008, (loudspeaker channel source/matrix) */
/* This sets the source to the TV tuner, for stereo operation */
@@ -304,121 +324,142 @@ void MSP3430SetSource(MSP3430Ptr m, CARD8 value)
}
#endif
-
static const char *
-MSP_getProductName (CARD16 product_id)
+MSP_getProductName(CARD16 product_id)
{
- switch (product_id) {
- case 0x0400: return "MSP3400D";
- case 0x040a: return "MSP3410D";
- case 0x0405: return "MSP3405D";
- case 0x040f: return "MSP3415D";
- case 0x0700: return "MSP3400G";
- case 0x070a: return "MSP3410G";
- case 0x071e: return "MSP3430G";
- case 0x0728: return "MSP3440G";
- case 0x0732: return "MSP3450G";
- case 0x070f: return "MSP3415G";
- case 0x0719: return "MSP3425G";
- case 0x072d: return "MSP3445G";
- case 0x0737: return "MSP3455G";
- case 0x0741: return "MSP3465G";
- }
- return "MSP - unknown type";
+ switch (product_id) {
+ case 0x0400:
+ return "MSP3400D";
+ case 0x040a:
+ return "MSP3410D";
+ case 0x0405:
+ return "MSP3405D";
+ case 0x040f:
+ return "MSP3415D";
+ case 0x0700:
+ return "MSP3400G";
+ case 0x070a:
+ return "MSP3410G";
+ case 0x071e:
+ return "MSP3430G";
+ case 0x0728:
+ return "MSP3440G";
+ case 0x0732:
+ return "MSP3450G";
+ case 0x070f:
+ return "MSP3415G";
+ case 0x0719:
+ return "MSP3425G";
+ case 0x072d:
+ return "MSP3445G";
+ case 0x0737:
+ return "MSP3455G";
+ case 0x0741:
+ return "MSP3465G";
+ }
+ return "MSP - unknown type";
}
#if __MSPDEBUG__ > 2
/*puts beep in MSP output
freq = 0x01 - 16Hz ... 0x40 - 1kHz ... 0xff - 4kHz
*/
-void MSPBeep(MSP3430Ptr m, CARD8 freq) {
- SetMSP3430Data (m, WR_DSP, 0x00, freq, 0x7f, 0x40);
+void
+MSPBeep(MSP3430Ptr m, CARD8 freq)
+{
+ SetMSP3430Data(m, WR_DSP, 0x00, freq, 0x7f, 0x40);
mpause(100);
- SetMSP3430Data (m, WR_DSP, 0x00, 0x14, 0x00, 0x00);
+ SetMSP3430Data(m, WR_DSP, 0x00, 0x14, 0x00, 0x00);
}
#endif
-void mpause(int milliseconds) {
- int i,m;
- m=milliseconds/20;
- for (i=0;i<m;i++) usleep(20000);
+void
+mpause(int milliseconds)
+{
+ int i, m;
+
+ m = milliseconds / 20;
+ for (i = 0; i < m; i++)
+ usleep(20000);
}
/*-----------------------------------------------------------------
| specific functions for all MSP34xxG chips
|----------------------------------------------------------------*/
-void InitMSP34xxG(MSP3430Ptr m)
+void
+InitMSP34xxG(MSP3430Ptr m)
{
- #if __MSPDEBUG__ > 1
- xf86DrvMsg(m->d.pI2CBus->scrnIndex,X_INFO,"InitMSP34xxG(m->connector=%d, m->standard=%d, m->chip_family=%d)\n",
- m->connector, m->standard, m->chip_family);
- #endif
- /* Reset MSP3430 */
- SetMSP3430Control(m, 0x00, 0x80, 0x00);
- /* Set it back to normal operation */
- SetMSP3430Control(m, 0x00, 0x00, 0x00);
-
- /*set MODUS register */
- /* bits: 0 - automatic sound detection */
- /* 1 - enable STATUS change */
- /* 12 - detect 6.5 Mhz carrier as D/K1, D/K2 or D/K NICAM (does not seem to work ) */
- /* 13 - detect 4.5 Mhz carrier as BTSC */
- if ( (m->standard & 0xff) == MSP3430_PAL )
- {
- SetMSP3430Data(m, WR_DEM, 0x00, 0x30, 0x30, 0x03|0x08); /* make O_ pins tristate */
- /* PAL standard */
- SetMSP3430Data(m, WR_DEM, 0x00, 0x20, 0x00, 0x01); /* possibly wrong */
- } else {
- SetMSP3430Data(m, WR_DEM, 0x00, 0x30, 0x20, 0x03|0x08);
- /* standard selection is M-BTSC-Stereo */
- SetMSP3430Data(m, WR_DEM, 0x00, 0x20, 0x00, 0x20);
- }
-
- switch(m->connector){
- case MSP3430_CONNECTOR_1:
- SetMSP3430Data(m, WR_DSP, 0x00, 0x08, 0x03, 0x20);
- break;
- case MSP3430_CONNECTOR_2:
- /* this has not been checked yet.. could be bogus */
- /* SCART Input Prescale: 0 dB gain */
- SetMSP3430Data(m, WR_DSP, 0x00, 0x0d, 0x19, 0x00);
- SetMSP3430Data(m, WR_DSP, 0x00, 0x08, 0x02, 0x20);
- break;
- case MSP3430_CONNECTOR_3:
- default:
- /* SCART Input Prescale: 0 dB gain */
- SetMSP3430Data(m, WR_DSP, 0x00, 0x0d, 0x19, 0x00);
-
- SetMSP3430Data(m, WR_DSP, 0x00, 0x08, 0x02, 0x20);
- break;
- }
-
- switch(m->standard){
- case MSP3430_PAL:
- SetMSP3430Data(m, WR_DSP, 0x00, 0x0e, 0x24, 0x03);
- SetMSP3430Data(m, WR_DSP, 0x00, 0x10, 0x00, 0x5a);
- SetMSP3430Data(m, WR_DEM, 0x00, 0x20, 0x00, 0x03);
- /* Set volume to FAST_MUTE. */
- SetMSP3430Data(m, WR_DSP, 0x00, 0x00, 0xFF, 0x00);
- break;
- case MSP3430_PAL_DK1:
- SetMSP3430Data(m, WR_DSP, 0x00, 0x0e, 0x24, 0x03);
- SetMSP3430Data(m, WR_DSP, 0x00, 0x10, 0x00, 0x5a);
- SetMSP3430Data(m, WR_DEM, 0x00, 0x20, 0x00, 0x04);
- /* Set volume to FAST_MUTE. */
- SetMSP3430Data(m, WR_DSP, 0x00, 0x00, 0xFF, 0x00);
- break;
- case MSP3430_SECAM: /* is this right ? */
- case MSP3430_NTSC:
- /* Write to DSP, register 0x000E, (prescale FM/FM matrix) */
- SetMSP3430Data(m, WR_DSP, 0x00, 0x0e, 0x24, 0x03);
-
- /* Set volume to FAST_MUTE. */
- SetMSP3430Data(m, WR_DSP, 0x00, 0x00, 0xFF, 0x00);
- break;
- }
+#if __MSPDEBUG__ > 1
+ xf86DrvMsg(m->d.pI2CBus->scrnIndex, X_INFO,
+ "InitMSP34xxG(m->connector=%d, m->standard=%d, m->chip_family=%d)\n",
+ m->connector, m->standard, m->chip_family);
+#endif
+ /* Reset MSP3430 */
+ SetMSP3430Control(m, 0x00, 0x80, 0x00);
+ /* Set it back to normal operation */
+ SetMSP3430Control(m, 0x00, 0x00, 0x00);
+
+ /*set MODUS register */
+ /* bits: 0 - automatic sound detection */
+ /* 1 - enable STATUS change */
+ /* 12 - detect 6.5 Mhz carrier as D/K1, D/K2 or D/K NICAM (does not seem to work ) */
+ /* 13 - detect 4.5 Mhz carrier as BTSC */
+ if ((m->standard & 0xff) == MSP3430_PAL) {
+ SetMSP3430Data(m, WR_DEM, 0x00, 0x30, 0x30, 0x03 | 0x08); /* make O_ pins tristate */
+ /* PAL standard */
+ SetMSP3430Data(m, WR_DEM, 0x00, 0x20, 0x00, 0x01); /* possibly wrong */
+ }
+ else {
+ SetMSP3430Data(m, WR_DEM, 0x00, 0x30, 0x20, 0x03 | 0x08);
+ /* standard selection is M-BTSC-Stereo */
+ SetMSP3430Data(m, WR_DEM, 0x00, 0x20, 0x00, 0x20);
+ }
+
+ switch (m->connector) {
+ case MSP3430_CONNECTOR_1:
+ SetMSP3430Data(m, WR_DSP, 0x00, 0x08, 0x03, 0x20);
+ break;
+ case MSP3430_CONNECTOR_2:
+ /* this has not been checked yet.. could be bogus */
+ /* SCART Input Prescale: 0 dB gain */
+ SetMSP3430Data(m, WR_DSP, 0x00, 0x0d, 0x19, 0x00);
+ SetMSP3430Data(m, WR_DSP, 0x00, 0x08, 0x02, 0x20);
+ break;
+ case MSP3430_CONNECTOR_3:
+ default:
+ /* SCART Input Prescale: 0 dB gain */
+ SetMSP3430Data(m, WR_DSP, 0x00, 0x0d, 0x19, 0x00);
+
+ SetMSP3430Data(m, WR_DSP, 0x00, 0x08, 0x02, 0x20);
+ break;
+ }
+
+ switch (m->standard) {
+ case MSP3430_PAL:
+ SetMSP3430Data(m, WR_DSP, 0x00, 0x0e, 0x24, 0x03);
+ SetMSP3430Data(m, WR_DSP, 0x00, 0x10, 0x00, 0x5a);
+ SetMSP3430Data(m, WR_DEM, 0x00, 0x20, 0x00, 0x03);
+ /* Set volume to FAST_MUTE. */
+ SetMSP3430Data(m, WR_DSP, 0x00, 0x00, 0xFF, 0x00);
+ break;
+ case MSP3430_PAL_DK1:
+ SetMSP3430Data(m, WR_DSP, 0x00, 0x0e, 0x24, 0x03);
+ SetMSP3430Data(m, WR_DSP, 0x00, 0x10, 0x00, 0x5a);
+ SetMSP3430Data(m, WR_DEM, 0x00, 0x20, 0x00, 0x04);
+ /* Set volume to FAST_MUTE. */
+ SetMSP3430Data(m, WR_DSP, 0x00, 0x00, 0xFF, 0x00);
+ break;
+ case MSP3430_SECAM: /* is this right ? */
+ case MSP3430_NTSC:
+ /* Write to DSP, register 0x000E, (prescale FM/FM matrix) */
+ SetMSP3430Data(m, WR_DSP, 0x00, 0x0e, 0x24, 0x03);
+
+ /* Set volume to FAST_MUTE. */
+ SetMSP3430Data(m, WR_DSP, 0x00, 0x00, 0xFF, 0x00);
+ break;
+ }
}
@@ -426,41 +467,40 @@ void InitMSP34xxG(MSP3430Ptr m)
| specific functions for all MSP34x5D chips
|----------------------------------------------------------------*/
-void InitMSP34x5D(MSP3430Ptr m)
+void
+InitMSP34x5D(MSP3430Ptr m)
{
-int count;
-CARD8 high,low;
-CARD16 result,standard;
-CARD16 peak;
-
-
-if (m->c_format==MSPFORMAT_UNKNOWN) ResetMSP3430(m);
-else {
- /*mute volume*/
- SetMSP3430Data (m, WR_DSP, 0x00, 0x00, 0x00, 0x00);
-}
-
-
+ int count;
+ CARD8 high, low;
+ CARD16 result, standard;
+ CARD16 peak;
+
+ if (m->c_format == MSPFORMAT_UNKNOWN)
+ ResetMSP3430(m);
+ else {
+ /*mute volume */
+ SetMSP3430Data(m, WR_DSP, 0x00, 0x00, 0x00, 0x00);
+ }
- switch(m->connector){
- case MSP3430_CONNECTOR_2:
- case MSP3430_CONNECTOR_3:
- if (m->c_format!=MSPFORMAT_SCART) {
- /* SCART Input Prescale: 0 dB gain */
- SetMSP3430Data (m, WR_DSP, 0x00, 0x0d, 0x19, 0x00);
- /* this has not been checked yet.. could be bogus */
- m->c_format=MSPFORMAT_SCART; /*stereo*/
- }
- break;
- case MSP3430_CONNECTOR_1:
- default:
-
- switch ( m->standard & 0x00ff ) {
- case MSP3430_PAL:
- switch( m->standard ) {
- case MSP3430_PAL_DK1:
- standard=MSPSTANDARD_FM_DK1;
- break;
+ switch (m->connector) {
+ case MSP3430_CONNECTOR_2:
+ case MSP3430_CONNECTOR_3:
+ if (m->c_format != MSPFORMAT_SCART) {
+ /* SCART Input Prescale: 0 dB gain */
+ SetMSP3430Data(m, WR_DSP, 0x00, 0x0d, 0x19, 0x00);
+ /* this has not been checked yet.. could be bogus */
+ m->c_format = MSPFORMAT_SCART; /*stereo */
+ }
+ break;
+ case MSP3430_CONNECTOR_1:
+ default:
+
+ switch (m->standard & 0x00ff) {
+ case MSP3430_PAL:
+ switch (m->standard) {
+ case MSP3430_PAL_DK1:
+ standard = MSPSTANDARD_FM_DK1;
+ break;
/* case MSP3430_PAL_DK2:
standard=MSPSTANDARD_FM_DK2;
break;
@@ -469,259 +509,271 @@ else {
standard=MSPSTANDARD_AUTO;
break;
*/
- default:
- standard=MSPSTANDARD_AUTO;
- }
- break;
- case MSP3430_SECAM:
- standard=MSPSTANDARD_AUTO;
- case MSP3430_NTSC:
- /* Only MSP34x5 supported format - Korean NTSC-M*/
- standard=MSPSTANDARD_FM_M;
- default:
- standard=MSPSTANDARD_AUTO;
- }
-
- /*no NICAM support in MSP3410D - force to autodetect*/
- if ((m->chip_id==0x405) && (standard>=MSPSTANDARD_NICAM_BG))
- standard=MSPSTANDARD_AUTO;
-
- if (m->c_standard != standard) {
-
- SetMSP3430Data (m, WR_DEM, 0x00, 0x20, standard>>8, standard & 0xFF);
- if (standard==MSPSTANDARD_AUTO) {
- count = 50; /* time shouldn't exceed 1s, just in case */
- do {
- usleep(20000);
- GetMSP3430Data (m, RD_DEM, 0x00, 0x7e, &high, &low);
- result = ( high << 8 ) | low;
- --count;
- } while( result > 0x07ff && count > 0 );
-
- if ((result > MSPSTANDARD_AUTO))
- standard=result;
- else standard=MSPSTANDARD_UNKNOWN;
+ default:
+ standard = MSPSTANDARD_AUTO;
+ }
+ break;
+ case MSP3430_SECAM:
+ standard = MSPSTANDARD_AUTO;
+ case MSP3430_NTSC:
+ /* Only MSP34x5 supported format - Korean NTSC-M */
+ standard = MSPSTANDARD_FM_M;
+ default:
+ standard = MSPSTANDARD_AUTO;
+ }
+
+ /*no NICAM support in MSP3410D - force to autodetect */
+ if ((m->chip_id == 0x405) && (standard >= MSPSTANDARD_NICAM_BG))
+ standard = MSPSTANDARD_AUTO;
+
+ if (m->c_standard != standard) {
+
+ SetMSP3430Data(m, WR_DEM, 0x00, 0x20, standard >> 8,
+ standard & 0xFF);
+ if (standard == MSPSTANDARD_AUTO) {
+ count = 50; /* time shouldn't exceed 1s, just in case */
+ do {
+ usleep(20000);
+ GetMSP3430Data(m, RD_DEM, 0x00, 0x7e, &high, &low);
+ result = (high << 8) | low;
+ --count;
+ } while (result > 0x07ff && count > 0);
+
+ if ((result > MSPSTANDARD_AUTO))
+ standard = result;
+ else
+ standard = MSPSTANDARD_UNKNOWN;
#if __MSPDEBUG__ > 1
- xf86DrvMsg(m->d.pI2CBus->scrnIndex,X_INFO,"Detected audio standard: %d\n",result);
-#endif
- /* result = MSPSTANDARD_NICAM_L can be one of:
- SECAM_L - MSPSTANDARD_NICAM_L
- D/K1 - MSPSTANDARD_FM_DK1
- D/K2 - MSPSTANDARD_FM_DK2
- D/K-NICAM - MSPSTANDARD_NICAM_DK*/
- if( standard == MSPSTANDARD_NICAM_L ) {
- if ((m->standard & 0x00ff)==MSP3430_PAL) {
- /* force PAL D/K */
- standard=MSPSTANDARD_FM_DK1;
- SetMSP3430Data (m, WR_DEM, 0x00, 0x20, standard>>8, standard & 0xFF);
+ xf86DrvMsg(m->d.pI2CBus->scrnIndex, X_INFO,
+ "Detected audio standard: %d\n", result);
+#endif
+ /* result = MSPSTANDARD_NICAM_L can be one of:
+ SECAM_L - MSPSTANDARD_NICAM_L
+ D/K1 - MSPSTANDARD_FM_DK1
+ D/K2 - MSPSTANDARD_FM_DK2
+ D/K-NICAM - MSPSTANDARD_NICAM_DK */
+ if (standard == MSPSTANDARD_NICAM_L) {
+ if ((m->standard & 0x00ff) == MSP3430_PAL) {
+ /* force PAL D/K */
+ standard = MSPSTANDARD_FM_DK1;
+ SetMSP3430Data(m, WR_DEM, 0x00, 0x20, standard >> 8,
+ standard & 0xFF);
#if __MSPDEBUG__ > 1
- xf86DrvMsg(m->d.pI2CBus->scrnIndex,X_INFO, "Detected 6.5MHz carrier - forced to D/K1 !!!\n" );
+ xf86DrvMsg(m->d.pI2CBus->scrnIndex, X_INFO,
+ "Detected 6.5MHz carrier - forced to D/K1 !!!\n");
#endif
- }
- }
- }
- m->c_standard=standard;
- } /*end - standard changed*/
- else {
- if (standard<MSPSTANDARD_NICAM_BG) {
- /* get old value of ident. mode register*/
- GetMSP3430Data (m, RD_DSP, 0x00, 0x15, &high, &low);
- /* reset Ident-Filter */
- SetMSP3430Data (m, WR_DSP, 0x00, 0x14, 0x00, 0x3F);
- /* put back old value to ident. mode register*/
- SetMSP3430Data (m, WR_DSP, 0x00, 0x14, 0x00, low);
- }
- }
-
- if (standard<=MSPSTANDARD_AUTO) {
- m->c_format=MSPFORMAT_1xFM;
- }
- else if (standard<MSPSTANDARD_NICAM_BG) {
- /* set FM prescale */
- SetMSP3430Data (m, WR_DSP, 0x00, 0x0e, 0x30, 0);
- /* set FM deemphasis*/
- SetMSP3430Data (m, WR_DSP, 0x00, 0x0f, ((standard==MSPSTANDARD_FM_M)?0:1), 0);
-
- /* check if FM2 carrier is present */
- /*turn off FM DC Notch*/
- SetMSP3430Data (m, WR_DSP, 0x00, 0x17, 0x00, 0x3f);
- /*matrix source for Quasi-Peak Detector - stereo: ch2->L ch1->R*/
- SetMSP3430Data (m, WR_DSP, 0x00, 0x0c, 0x00, 0x20);
-
- mpause(250);
- GetMSP3430Data (m, RD_DSP, 0x00, 0x1A, &high, &low);
- peak = (high << 8) | low;
+ }
+ }
+ }
+ m->c_standard = standard;
+ } /*end - standard changed */
+ else {
+ if (standard < MSPSTANDARD_NICAM_BG) {
+ /* get old value of ident. mode register */
+ GetMSP3430Data(m, RD_DSP, 0x00, 0x15, &high, &low);
+ /* reset Ident-Filter */
+ SetMSP3430Data(m, WR_DSP, 0x00, 0x14, 0x00, 0x3F);
+ /* put back old value to ident. mode register */
+ SetMSP3430Data(m, WR_DSP, 0x00, 0x14, 0x00, low);
+ }
+ }
+
+ if (standard <= MSPSTANDARD_AUTO) {
+ m->c_format = MSPFORMAT_1xFM;
+ }
+ else if (standard < MSPSTANDARD_NICAM_BG) {
+ /* set FM prescale */
+ SetMSP3430Data(m, WR_DSP, 0x00, 0x0e, 0x30, 0);
+ /* set FM deemphasis */
+ SetMSP3430Data(m, WR_DSP, 0x00, 0x0f,
+ ((standard == MSPSTANDARD_FM_M) ? 0 : 1), 0);
+
+ /* check if FM2 carrier is present */
+ /*turn off FM DC Notch */
+ SetMSP3430Data(m, WR_DSP, 0x00, 0x17, 0x00, 0x3f);
+ /*matrix source for Quasi-Peak Detector - stereo: ch2->L ch1->R */
+ SetMSP3430Data(m, WR_DSP, 0x00, 0x0c, 0x00, 0x20);
+
+ mpause(250);
+ GetMSP3430Data(m, RD_DSP, 0x00, 0x1A, &high, &low);
+ peak = (high << 8) | low;
#if __MSPDEBUG__ > 1
- xf86DrvMsg(m->d.pI2CBus->scrnIndex,X_INFO,"Second carrier Quasi-Peak detection: %d\n",peak);
-#endif
- /*turn on FM DC Notch*/
- SetMSP3430Data (m, WR_DSP, 0x00, 0x17, 0x00, 0x00);
-
- if (peak<5) {
- /* if second carrier not detected - only mono from first carrier*/
- m->c_format=MSPFORMAT_1xFM;
- }
- else {
- m->c_format=MSPFORMAT_2xFM;
- /*start of FM identification process - FM_WAIT
- wait at least 0.5s - used 1s - gives beter resolution*/
- mpause(1000);
- }
- }
- else {
- if (standard==MSPSTANDARD_NICAM_L) {
- m->c_format=MSPFORMAT_NICAM_AM;
- /* set AM prescale */
- SetMSP3430Data (m, WR_DSP, 0x00, 0x0e, 0x7C, 0);
- }
- else {
- m->c_format=MSPFORMAT_NICAM_FM;
- /* set FM prescale */
- SetMSP3430Data (m, WR_DSP, 0x00, 0x0e, 0x30, 0);
- }
- /* set FM deemphasis*/
- SetMSP3430Data (m, WR_DSP, 0x00, 0x0f, 0x00, 0);
- /* set NICAM prescale to 0dB */
- SetMSP3430Data (m, WR_DSP, 0x00, 0x10, 0x20, 0);
- }
-
- break;
- } /*end - case conector*/
+ xf86DrvMsg(m->d.pI2CBus->scrnIndex, X_INFO,
+ "Second carrier Quasi-Peak detection: %d\n", peak);
+#endif
+ /*turn on FM DC Notch */
+ SetMSP3430Data(m, WR_DSP, 0x00, 0x17, 0x00, 0x00);
+
+ if (peak < 5) {
+ /* if second carrier not detected - only mono from first carrier */
+ m->c_format = MSPFORMAT_1xFM;
+ }
+ else {
+ m->c_format = MSPFORMAT_2xFM;
+ /*start of FM identification process - FM_WAIT
+ wait at least 0.5s - used 1s - gives beter resolution */
+ mpause(1000);
+ }
+ }
+ else {
+ if (standard == MSPSTANDARD_NICAM_L) {
+ m->c_format = MSPFORMAT_NICAM_AM;
+ /* set AM prescale */
+ SetMSP3430Data(m, WR_DSP, 0x00, 0x0e, 0x7C, 0);
+ }
+ else {
+ m->c_format = MSPFORMAT_NICAM_FM;
+ /* set FM prescale */
+ SetMSP3430Data(m, WR_DSP, 0x00, 0x0e, 0x30, 0);
+ }
+ /* set FM deemphasis */
+ SetMSP3430Data(m, WR_DSP, 0x00, 0x0f, 0x00, 0);
+ /* set NICAM prescale to 0dB */
+ SetMSP3430Data(m, WR_DSP, 0x00, 0x10, 0x20, 0);
+ }
+
+ break;
+ } /*end - case conector */
CheckModeMSP34x5D(m);
-
- /* Set volume to FAST_MUTE. */
- /*SetMSP3430Data(m, WR_DSP, 0x00, 0x00, 0xFF, 0x00);*/
- /*set volume*/
- MSP3430SetVolume(m,m->volume);
-
- __MSPBEEP
-
-
-} /* EnableMSP34x5D ()... */
-
+ /* Set volume to FAST_MUTE. */
+ /*SetMSP3430Data(m, WR_DSP, 0x00, 0x00, 0xFF, 0x00); */
+ /*set volume */
+ MSP3430SetVolume(m, m->volume);
+__MSPBEEP} /* EnableMSP34x5D ()... */
-void CheckModeMSP34x5D(MSP3430Ptr m) {
- const char stereo_on=25;
- const char stereo_off=20;
- const char dual_on=-stereo_on;
- const char dual_off=-stereo_off;
+void
+CheckModeMSP34x5D(MSP3430Ptr m)
+{
+ const char stereo_on = 25;
+ const char stereo_off = 20;
+ const char dual_on = -stereo_on;
+ const char dual_off = -stereo_off;
char detect;
CARD8 matrix, fmmatrix, source, high, low;
- fmmatrix=0; /*no matrix*/
- source=0; /*FM*/
- switch (m->c_format) {
- case MSPFORMAT_NICAM_FM:
- case MSPFORMAT_NICAM_AM:
- case MSPFORMAT_SCART:
- source=( (m->c_format == MSPFORMAT_SCART)?2:1 );
- switch (m->mode) {
- case MSPMODE_MONO:
- matrix=0x30; /*MONO*/
- break;
- case MSPMODE_A:
- matrix=0x00; /*A*/
- break;
- case MSPMODE_B:
- matrix=0x10; /*B*/
- break;
- default:
- matrix=0x20; /*STEREO*/
- break;
- }
- break;
- default:
- case MSPFORMAT_1xFM:
- matrix=0x00; /*A*/
- break;
- case MSPFORMAT_2xFM:
- switch (m->mode) {
- case MSPMODE_MONO:
- matrix=0x30; /*MONO*/
- break;
- case MSPMODE_STEREO:
- matrix=0x20; /*STEREO*/
- fmmatrix=((m->c_standard==MSPSTANDARD_FM_M)?2:1);
- break;
- case MSPMODE_AB:
- matrix=0x20; /*STEREO*/
- break;
- case MSPMODE_A:
- matrix=0x00; /*A*/
- break;
- case MSPMODE_B:
- matrix=0x10; /*B*/
- break;
- default:
- /*FM_IDENT_CHECK*/
- GetMSP3430Data (m, RD_DSP, 0x00, 0x18, &high, &low);
- detect=(char)high;
+ fmmatrix = 0; /*no matrix */
+ source = 0;
+ /*FM*/ switch (m->c_format) {
+ case MSPFORMAT_NICAM_FM:
+ case MSPFORMAT_NICAM_AM:
+ case MSPFORMAT_SCART:
+ source = ((m->c_format == MSPFORMAT_SCART) ? 2 : 1);
+ switch (m->mode) {
+ case MSPMODE_MONO:
+ matrix = 0x30;
+ /*MONO*/ break;
+ case MSPMODE_A:
+ matrix = 0x00;
+ /*A*/ break;
+ case MSPMODE_B:
+ matrix = 0x10;
+ /*B*/ break;
+ default:
+ matrix = 0x20;
+ /*STEREO*/ break;
+ }
+ break;
+ default:
+ case MSPFORMAT_1xFM:
+ matrix = 0x00;
+ /*A*/ break;
+ case MSPFORMAT_2xFM:
+ switch (m->mode) {
+ case MSPMODE_MONO:
+ matrix = 0x30;
+ /*MONO*/ break;
+ case MSPMODE_STEREO:
+ matrix = 0x20;
+ /*STEREO*/ fmmatrix = ((m->c_standard == MSPSTANDARD_FM_M) ? 2 : 1);
+ break;
+ case MSPMODE_AB:
+ matrix = 0x20;
+ /*STEREO*/ break;
+ case MSPMODE_A:
+ matrix = 0x00;
+ /*A*/ break;
+ case MSPMODE_B:
+ matrix = 0x10;
+ /*B*/ break;
+ default:
+ /*FM_IDENT_CHECK */
+ GetMSP3430Data(m, RD_DSP, 0x00, 0x18, &high, &low);
+ detect = (char) high;
#if __MSPDEBUG__ > 1
- xf86DrvMsg(m->d.pI2CBus->scrnIndex,X_INFO,"Stereo Detection Register: %d\n",detect);
+ xf86DrvMsg(m->d.pI2CBus->scrnIndex, X_INFO,
+ "Stereo Detection Register: %d\n", detect);
#endif
- if (detect>=((m->c_mode==MSPMODE_STEREO)?stereo_off:stereo_on)) {
- m->c_mode=MSPMODE_STEREO;
- matrix=0x20; /*STEREO*/
- fmmatrix=((m->c_standard==MSPSTANDARD_FM_M)?2:1);
- }
- else if (detect<=((m->c_mode==MSPMODE_AB)?dual_off:dual_on)) {
- m->c_mode=MSPMODE_AB;
- switch (m->mode) {
- case MSPMODE_STEREO_AB: matrix=0x20; break;
- case MSPMODE_STEREO_B: matrix=0x10; break;
- default:
- case MSPMODE_A: matrix=0x00; break;
- }
- }
- else {
- m->c_mode=MSPMODE_MONO;
- matrix=0x30; /*MONO*/
- }
- break;
- } /* end - case mode*/
- break;
+ if (detect >=
+ ((m->c_mode == MSPMODE_STEREO) ? stereo_off : stereo_on)) {
+ m->c_mode = MSPMODE_STEREO;
+ matrix = 0x20;
+ /*STEREO*/
+ fmmatrix = ((m->c_standard == MSPSTANDARD_FM_M) ? 2 : 1);
+ }
+ else if (detect <= ((m->c_mode == MSPMODE_AB) ? dual_off : dual_on)) {
+ m->c_mode = MSPMODE_AB;
+ switch (m->mode) {
+ case MSPMODE_STEREO_AB:
+ matrix = 0x20;
+ break;
+ case MSPMODE_STEREO_B:
+ matrix = 0x10;
+ break;
+ default:
+ case MSPMODE_A:
+ matrix = 0x00;
+ break;
+ }
+ }
+ else {
+ m->c_mode = MSPMODE_MONO;
+ matrix = 0x30;
+ /*MONO*/}
+ break;
+ } /* end - case mode */
+ break;
}
if (m->c_fmmatrix != fmmatrix) {
- GetMSP3430Data (m, RD_DSP, 0x00, 0x0e, &high, &low);
- SetMSP3430Data (m, WR_DSP, 0x00, 0x0e, high, fmmatrix);
- m->c_fmmatrix = fmmatrix;
+ GetMSP3430Data(m, RD_DSP, 0x00, 0x0e, &high, &low);
+ SetMSP3430Data(m, WR_DSP, 0x00, 0x0e, high, fmmatrix);
+ m->c_fmmatrix = fmmatrix;
}
if ((m->c_matrix != matrix) || (m->c_source != source)) {
- /*set chanel source and matrix for loudspeaker*/
- SetMSP3430Data (m, WR_DSP, 0x00, 0x08, source, matrix);
-
- m->c_matrix = matrix;
- m->c_source = source;
+ /*set chanel source and matrix for loudspeaker */
+ SetMSP3430Data(m, WR_DSP, 0x00, 0x08, source, matrix);
+
+ m->c_matrix = matrix;
+ m->c_source = source;
}
- if ( ((m->c_format) & 0xF0) == MSPFORMAT_NICAM)
- SetMSP3430Data (m, WR_DEM, 0x00, 0x21, 0, 1);
+ if (((m->c_format) & 0xF0) == MSPFORMAT_NICAM)
+ SetMSP3430Data(m, WR_DEM, 0x00, 0x21, 0, 1);
#if __MSPDEBUG__ > 0
- char *msg;
- switch (matrix) {
- case 0x30: /*MONO*/
- msg="MONO";
- break;
- case 0x00: /*LEFT*/
- msg="MONO/CHANNEL_1";
- break;
- case 0x10: /*RIGHT*/
- msg="MONO/CHANNEL_2";
- break;
- case 0x20: /*LEFT*/
- msg="STEREO";
- break;
- default:
- msg="unknown";
- break;
- }
- xf86DrvMsg(m->d.pI2CBus->scrnIndex,X_INFO,"Audio mode set to: %s\n",msg);
+ char *msg;
+
+ switch (matrix) {
+ case 0x30:
+ /*MONO*/ msg = "MONO";
+ break;
+ case 0x00:
+ /*LEFT*/ msg = "MONO/CHANNEL_1";
+ break;
+ case 0x10:
+ /*RIGHT*/ msg = "MONO/CHANNEL_2";
+ break;
+ case 0x20:
+ /*LEFT*/ msg = "STEREO";
+ break;
+ default:
+ msg = "unknown";
+ break;
+ }
+ xf86DrvMsg(m->d.pI2CBus->scrnIndex, X_INFO, "Audio mode set to: %s\n", msg);
#endif
}
-
diff --git a/xorg-server/hw/xfree86/i2c/msp3430_module.c b/xorg-server/hw/xfree86/i2c/msp3430_module.c
index c5c24635f..e177efe7f 100644
--- a/xorg-server/hw/xfree86/i2c/msp3430_module.c
+++ b/xorg-server/hw/xfree86/i2c/msp3430_module.c
@@ -1,25 +1,24 @@
-#ifdef HAVE_XORG_CONFIG_H
-#include <xorg-config.h>
-#endif
-
-#include "xf86Module.h"
-
-static XF86ModuleVersionInfo msp3430VersRec =
-{
- "msp3430",
- MODULEVENDORSTRING,
- MODINFOSTRING1,
- MODINFOSTRING2,
- XORG_VERSION_CURRENT,
- 1, 0, 0,
- ABI_CLASS_VIDEODRV, /* This needs the video driver ABI */
- ABI_VIDEODRV_VERSION,
- MOD_CLASS_NONE,
- {0,0,0,0}
-};
-
-_X_EXPORT XF86ModuleData msp3430ModuleData = {
- &msp3430VersRec,
- NULL,
- NULL
-};
+#ifdef HAVE_XORG_CONFIG_H
+#include <xorg-config.h>
+#endif
+
+#include "xf86Module.h"
+
+static XF86ModuleVersionInfo msp3430VersRec = {
+ "msp3430",
+ MODULEVENDORSTRING,
+ MODINFOSTRING1,
+ MODINFOSTRING2,
+ XORG_VERSION_CURRENT,
+ 1, 0, 0,
+ ABI_CLASS_VIDEODRV, /* This needs the video driver ABI */
+ ABI_VIDEODRV_VERSION,
+ MOD_CLASS_NONE,
+ {0, 0, 0, 0}
+};
+
+_X_EXPORT XF86ModuleData msp3430ModuleData = {
+ &msp3430VersRec,
+ NULL,
+ NULL
+};
diff --git a/xorg-server/hw/xfree86/i2c/tda8425.c b/xorg-server/hw/xfree86/i2c/tda8425.c
index abbbb2a03..051249b8a 100644
--- a/xorg-server/hw/xfree86/i2c/tda8425.c
+++ b/xorg-server/hw/xfree86/i2c/tda8425.c
@@ -1,78 +1,83 @@
-#ifdef HAVE_XORG_CONFIG_H
-#include <xorg-config.h>
-#endif
-
-#include "xf86.h"
-#include "xf86i2c.h"
-#include "tda8425.h"
-#include "i2c_def.h"
-
-#define TDA8425(a,b) { \
- data[0]=a; \
- data[1]=b; \
- I2C_WriteRead(&(t->d), data, 2, NULL, 0); \
- }
-
-TDA8425Ptr Detect_tda8425(I2CBusPtr b, I2CSlaveAddr addr, Bool force)
-{
- TDA8425Ptr t;
-
- t = calloc(1, sizeof(TDA8425Rec));
- if(t == NULL) return NULL;
- t->d.DevName = "TDA8425 BTSC Stereo Audio Processor";
- t->d.SlaveAddr = addr;
- t->d.pI2CBus = b;
- t->d.NextDev = NULL;
- t->d.StartTimeout = b->StartTimeout;
- t->d.BitTimeout = b->BitTimeout;
- t->d.AcknTimeout = b->AcknTimeout;
- t->d.ByteTimeout = b->ByteTimeout;
-
- if(!force && !I2CProbeAddress(b, addr))
- {
- free(t);
- return NULL;
- }
-
- /* set default parameters */
- if(!I2CDevInit(&(t->d)))
- {
- free(t);
- return NULL;
- }
-
- return t;
-}
-
-Bool tda8425_init(TDA8425Ptr t)
-{
- t->stereo = 3; /* 3 = Spacial 2 = Linear 1 = Pseudo 0 = Forced mono */
- t->v_left = 0xFF; /* FF - C0 */
- t->v_right = 0xFF; /* FF - C0 */
- t->bass = 0xF6; /* 0xFF - 0xF0 */
- t->treble = 0xF6; /* 0xFF - 0xF0 */
- t->src_sel = 3; /* 3 - stereo */
- t->mute = TRUE;
- t->mux = 0; /* 0 - source one, 1 -source 2 */
-
- tda8425_setaudio(t);
- return TRUE;
-}
-
-void tda8425_setaudio(TDA8425Ptr t)
-{
- I2CByte data[2];
-
- TDA8425(0x00, t->v_left );
- TDA8425(0x01, t->v_right );
- TDA8425(0x02, t->bass );
- TDA8425(0x03, t->treble );
- TDA8425(0x08, 0xC0 | (t->mute ? 0x20 : 0x0) | (t->stereo << 3) | (t->src_sel << 1) |
- t->mux);
-}
-
-void tda8425_mute(TDA8425Ptr t, Bool mute)
-{
- t->mute = mute;
- tda8425_setaudio(t);
-}
+#ifdef HAVE_XORG_CONFIG_H
+#include <xorg-config.h>
+#endif
+
+#include "xf86.h"
+#include "xf86i2c.h"
+#include "tda8425.h"
+#include "i2c_def.h"
+
+#define TDA8425(a,b) { \
+ data[0]=a; \
+ data[1]=b; \
+ I2C_WriteRead(&(t->d), data, 2, NULL, 0); \
+ }
+
+TDA8425Ptr
+Detect_tda8425(I2CBusPtr b, I2CSlaveAddr addr, Bool force)
+{
+ TDA8425Ptr t;
+
+ t = calloc(1, sizeof(TDA8425Rec));
+ if (t == NULL)
+ return NULL;
+ t->d.DevName = "TDA8425 BTSC Stereo Audio Processor";
+ t->d.SlaveAddr = addr;
+ t->d.pI2CBus = b;
+ t->d.NextDev = NULL;
+ t->d.StartTimeout = b->StartTimeout;
+ t->d.BitTimeout = b->BitTimeout;
+ t->d.AcknTimeout = b->AcknTimeout;
+ t->d.ByteTimeout = b->ByteTimeout;
+
+ if (!force && !I2CProbeAddress(b, addr)) {
+ free(t);
+ return NULL;
+ }
+
+ /* set default parameters */
+ if (!I2CDevInit(&(t->d))) {
+ free(t);
+ return NULL;
+ }
+
+ return t;
+}
+
+Bool
+tda8425_init(TDA8425Ptr t)
+{
+ t->stereo = 3; /* 3 = Spacial 2 = Linear 1 = Pseudo 0 = Forced mono */
+ t->v_left = 0xFF; /* FF - C0 */
+ t->v_right = 0xFF; /* FF - C0 */
+ t->bass = 0xF6; /* 0xFF - 0xF0 */
+ t->treble = 0xF6; /* 0xFF - 0xF0 */
+ t->src_sel = 3; /* 3 - stereo */
+ t->mute = TRUE;
+ t->mux = 0; /* 0 - source one, 1 -source 2 */
+
+ tda8425_setaudio(t);
+ return TRUE;
+}
+
+void
+tda8425_setaudio(TDA8425Ptr t)
+{
+ I2CByte data[2];
+
+ TDA8425(0x00, t->v_left);
+ TDA8425(0x01, t->v_right);
+ TDA8425(0x02, t->bass);
+ TDA8425(0x03, t->treble);
+ TDA8425(0x08,
+ 0xC0 | (t->mute ? 0x20 : 0x0) | (t->stereo << 3) | (t->
+ src_sel << 1) |
+ t->mux);
+}
+
+void
+tda8425_mute(TDA8425Ptr t, Bool mute)
+{
+ t->mute = mute;
+ tda8425_setaudio(t);
+}
diff --git a/xorg-server/hw/xfree86/i2c/tda8425.h b/xorg-server/hw/xfree86/i2c/tda8425.h
index 9c33e7f60..e3dfb1384 100644
--- a/xorg-server/hw/xfree86/i2c/tda8425.h
+++ b/xorg-server/hw/xfree86/i2c/tda8425.h
@@ -4,17 +4,17 @@
#include "xf86i2c.h"
typedef struct {
- I2CDevRec d;
-
- int mux;
- int stereo;
- int v_left;
- int v_right;
- int bass;
- int treble;
- int src_sel;
- Bool mute;
- } TDA8425Rec, *TDA8425Ptr;
+ I2CDevRec d;
+
+ int mux;
+ int stereo;
+ int v_left;
+ int v_right;
+ int bass;
+ int treble;
+ int src_sel;
+ Bool mute;
+} TDA8425Rec, *TDA8425Ptr;
#define TDA8425_ADDR_1 0x82
@@ -22,13 +22,16 @@ typedef struct {
This is because tda8425 is write-only and complete implementation
of I2C protocol is not always available. Besides address there is no good
way to autodetect it so we have to _know_ it is there anyway */
-
+
#define xf86_Detect_tda8425 Detect_tda8425
-extern _X_EXPORT TDA8425Ptr Detect_tda8425(I2CBusPtr b, I2CSlaveAddr addr,Bool force);
+extern _X_EXPORT TDA8425Ptr Detect_tda8425(I2CBusPtr b, I2CSlaveAddr addr,
+ Bool force);
#define xf86_tda8425_init tda8425_init
extern _X_EXPORT Bool tda8425_init(TDA8425Ptr t);
+
#define xf86_tda8425_setaudio tda8425_setaudio
extern _X_EXPORT void tda8425_setaudio(TDA8425Ptr t);
+
#define xf86_tda8425_mute tda8425_mute
extern _X_EXPORT void tda8425_mute(TDA8425Ptr t, Bool mute);
diff --git a/xorg-server/hw/xfree86/i2c/tda8425_module.c b/xorg-server/hw/xfree86/i2c/tda8425_module.c
index 936281460..74c820f73 100644
--- a/xorg-server/hw/xfree86/i2c/tda8425_module.c
+++ b/xorg-server/hw/xfree86/i2c/tda8425_module.c
@@ -1,25 +1,24 @@
-#ifdef HAVE_XORG_CONFIG_H
-#include <xorg-config.h>
-#endif
-
-#include "xf86Module.h"
-
-static XF86ModuleVersionInfo tda8425VersRec =
-{
- "tda8425",
- MODULEVENDORSTRING,
- MODINFOSTRING1,
- MODINFOSTRING2,
- XORG_VERSION_CURRENT,
- 1, 0, 0,
- ABI_CLASS_VIDEODRV, /* This needs the video driver ABI */
- ABI_VIDEODRV_VERSION,
- MOD_CLASS_NONE,
- {0,0,0,0}
-};
-
-_X_EXPORT XF86ModuleData tda8425ModuleData = {
- &tda8425VersRec,
- NULL,
- NULL
-};
+#ifdef HAVE_XORG_CONFIG_H
+#include <xorg-config.h>
+#endif
+
+#include "xf86Module.h"
+
+static XF86ModuleVersionInfo tda8425VersRec = {
+ "tda8425",
+ MODULEVENDORSTRING,
+ MODINFOSTRING1,
+ MODINFOSTRING2,
+ XORG_VERSION_CURRENT,
+ 1, 0, 0,
+ ABI_CLASS_VIDEODRV, /* This needs the video driver ABI */
+ ABI_VIDEODRV_VERSION,
+ MOD_CLASS_NONE,
+ {0, 0, 0, 0}
+};
+
+_X_EXPORT XF86ModuleData tda8425ModuleData = {
+ &tda8425VersRec,
+ NULL,
+ NULL
+};
diff --git a/xorg-server/hw/xfree86/i2c/tda9850.c b/xorg-server/hw/xfree86/i2c/tda9850.c
index 5d794dfe5..c2ce6971f 100644
--- a/xorg-server/hw/xfree86/i2c/tda9850.c
+++ b/xorg-server/hw/xfree86/i2c/tda9850.c
@@ -1,112 +1,136 @@
-#ifdef HAVE_XORG_CONFIG_H
-#include <xorg-config.h>
-#endif
-
-#include "xf86.h"
-#include "xf86i2c.h"
-#include "tda9850.h"
-#include "i2c_def.h"
-
-#define TDA9850(a,b) { \
- data[0]=a; \
- data[1]=b; \
- I2C_WriteRead(&(t->d), data, 2, NULL, 0); \
- }
-
-TDA9850Ptr Detect_tda9850(I2CBusPtr b, I2CSlaveAddr addr)
-{
- TDA9850Ptr t;
- I2CByte a;
-
- t = calloc(1, sizeof(TDA9850Rec));
- if(t == NULL) return NULL;
- switch(addr)
- {
- case TDA9850_ADDR_1:
- t->d.DevName = "TDA9850 BTSC Stereo+SAP Audio Processor";
- break;
- default:
- t->d.DevName = "Generic TDAxxxx";
- break;
- }
- t->d.SlaveAddr = addr;
- t->d.pI2CBus = b;
- t->d.NextDev = NULL;
- t->d.StartTimeout = b->StartTimeout;
- t->d.BitTimeout = b->BitTimeout;
- t->d.AcknTimeout = b->AcknTimeout;
- t->d.ByteTimeout = b->ByteTimeout;
-
- if(!I2C_WriteRead(&(t->d), NULL, 0, &a, 1))
- {
- free(t);
- return NULL;
- }
-
- /* set default parameters */
- if(!I2CDevInit(&(t->d)))
- {
- free(t);
- return NULL;
- }
-
- return t;
-}
-
-Bool tda9850_init(TDA9850Ptr t)
-{
- t->stereo = 1;
- t->sap = 0;
- t->mute = TRUE;
- t->sap_mute = TRUE;
- tda9850_setaudio(t);
- return TRUE;
-}
-
-void tda9850_setaudio(TDA9850Ptr t)
-{
-CARD8 data[2];
-
-if(t->mux==2)
-{
- TDA9850(0x04,0x0F); TDA9850(0x05,0x0F); TDA9850(0x06, 0x58);
- TDA9850(0x07,0x07); TDA9850(0x08,0x00);
- TDA9850(0x09,0x00); TDA9850(0x0A,0x03);
-} else
-{
- TDA9850(0x04,0x07); TDA9850(0x05,0x07);
- TDA9850(0x06,0x58); TDA9850(0x07,0x07);
- TDA9850(0x08,0x10); TDA9850(0x09,0x10);
- TDA9850(0x0A,0x03);
-}
-
-TDA9850(0x06,(t->stereo<<6)|(t->sap<<7)|(t->mute?0x8:0)|(t->sap_mute?0x10:0x0));
-}
-
-void tda9850_mute(TDA9850Ptr t, Bool mute)
-{
-CARD8 data[2];
-
-xf86DrvMsg(t->d.pI2CBus->scrnIndex, X_INFO, "tda9850_mute %s\n", mute ? "on" : "off");
-t->mute = mute;
-
-TDA9850(0x06,(t->stereo<<6)|(t->sap<<7)|(t->mute?0x8:0x0)|(t->sap_mute?0x10:0x0));
-}
-
-void tda9850_sap_mute(TDA9850Ptr t, Bool sap_mute)
-{
-CARD8 data[2];
-
-xf86DrvMsg(t->d.pI2CBus->scrnIndex, X_INFO, "tda9850_sap_mute %s\n", sap_mute ? "on" : "off");
-t->sap_mute = sap_mute;
-
-TDA9850(0x06,(t->stereo<<6)|(t->sap<<7)|(t->mute?0x8:0x0)|(t->sap_mute?0x10:0x0));
-}
-
-CARD16 tda9850_getstatus(TDA9850Ptr t)
-{
-CARD16 status;
-
-I2C_WriteRead(&(t->d), NULL, 0, (I2CByte *)&status, 2);
-return status;
-}
+#ifdef HAVE_XORG_CONFIG_H
+#include <xorg-config.h>
+#endif
+
+#include "xf86.h"
+#include "xf86i2c.h"
+#include "tda9850.h"
+#include "i2c_def.h"
+
+#define TDA9850(a,b) { \
+ data[0]=a; \
+ data[1]=b; \
+ I2C_WriteRead(&(t->d), data, 2, NULL, 0); \
+ }
+
+TDA9850Ptr
+Detect_tda9850(I2CBusPtr b, I2CSlaveAddr addr)
+{
+ TDA9850Ptr t;
+ I2CByte a;
+
+ t = calloc(1, sizeof(TDA9850Rec));
+ if (t == NULL)
+ return NULL;
+ switch (addr) {
+ case TDA9850_ADDR_1:
+ t->d.DevName = "TDA9850 BTSC Stereo+SAP Audio Processor";
+ break;
+ default:
+ t->d.DevName = "Generic TDAxxxx";
+ break;
+ }
+ t->d.SlaveAddr = addr;
+ t->d.pI2CBus = b;
+ t->d.NextDev = NULL;
+ t->d.StartTimeout = b->StartTimeout;
+ t->d.BitTimeout = b->BitTimeout;
+ t->d.AcknTimeout = b->AcknTimeout;
+ t->d.ByteTimeout = b->ByteTimeout;
+
+ if (!I2C_WriteRead(&(t->d), NULL, 0, &a, 1)) {
+ free(t);
+ return NULL;
+ }
+
+ /* set default parameters */
+ if (!I2CDevInit(&(t->d))) {
+ free(t);
+ return NULL;
+ }
+
+ return t;
+}
+
+Bool
+tda9850_init(TDA9850Ptr t)
+{
+ t->stereo = 1;
+ t->sap = 0;
+ t->mute = TRUE;
+ t->sap_mute = TRUE;
+ tda9850_setaudio(t);
+ return TRUE;
+}
+
+void
+tda9850_setaudio(TDA9850Ptr t)
+{
+ CARD8 data[2];
+
+ if (t->mux == 2) {
+ TDA9850(0x04, 0x0F);
+ TDA9850(0x05, 0x0F);
+ TDA9850(0x06, 0x58);
+ TDA9850(0x07, 0x07);
+ TDA9850(0x08, 0x00);
+ TDA9850(0x09, 0x00);
+ TDA9850(0x0A, 0x03);
+ }
+ else {
+ TDA9850(0x04, 0x07);
+ TDA9850(0x05, 0x07);
+ TDA9850(0x06, 0x58);
+ TDA9850(0x07, 0x07);
+ TDA9850(0x08, 0x10);
+ TDA9850(0x09, 0x10);
+ TDA9850(0x0A, 0x03);
+ }
+
+ TDA9850(0x06,
+ (t->stereo << 6) | (t->sap << 7) | (t->mute ? 0x8 : 0) | (t->
+ sap_mute ?
+ 0x10 :
+ 0x0));
+}
+
+void
+tda9850_mute(TDA9850Ptr t, Bool mute)
+{
+ CARD8 data[2];
+
+ xf86DrvMsg(t->d.pI2CBus->scrnIndex, X_INFO, "tda9850_mute %s\n",
+ mute ? "on" : "off");
+ t->mute = mute;
+
+ TDA9850(0x06,
+ (t->stereo << 6) | (t->sap << 7) | (t->mute ? 0x8 : 0x0) | (t->
+ sap_mute
+ ? 0x10 :
+ 0x0));
+}
+
+void
+tda9850_sap_mute(TDA9850Ptr t, Bool sap_mute)
+{
+ CARD8 data[2];
+
+ xf86DrvMsg(t->d.pI2CBus->scrnIndex, X_INFO, "tda9850_sap_mute %s\n",
+ sap_mute ? "on" : "off");
+ t->sap_mute = sap_mute;
+
+ TDA9850(0x06,
+ (t->stereo << 6) | (t->sap << 7) | (t->mute ? 0x8 : 0x0) | (t->
+ sap_mute
+ ? 0x10 :
+ 0x0));
+}
+
+CARD16
+tda9850_getstatus(TDA9850Ptr t)
+{
+ CARD16 status;
+
+ I2C_WriteRead(&(t->d), NULL, 0, (I2CByte *) & status, 2);
+ return status;
+}
diff --git a/xorg-server/hw/xfree86/i2c/tda9850_module.c b/xorg-server/hw/xfree86/i2c/tda9850_module.c
index 239cff4fd..197d65a71 100644
--- a/xorg-server/hw/xfree86/i2c/tda9850_module.c
+++ b/xorg-server/hw/xfree86/i2c/tda9850_module.c
@@ -1,25 +1,24 @@
-#ifdef HAVE_XORG_CONFIG_H
-#include <xorg-config.h>
-#endif
-
-#include "xf86Module.h"
-
-static XF86ModuleVersionInfo tda9850VersRec =
-{
- "tda9850",
- MODULEVENDORSTRING,
- MODINFOSTRING1,
- MODINFOSTRING2,
- XORG_VERSION_CURRENT,
- 1, 0, 0,
- ABI_CLASS_VIDEODRV, /* This needs the video driver ABI */
- ABI_VIDEODRV_VERSION,
- MOD_CLASS_NONE,
- {0,0,0,0}
-};
-
-_X_EXPORT XF86ModuleData tda9850ModuleData = {
- &tda9850VersRec,
- NULL,
- NULL
-};
+#ifdef HAVE_XORG_CONFIG_H
+#include <xorg-config.h>
+#endif
+
+#include "xf86Module.h"
+
+static XF86ModuleVersionInfo tda9850VersRec = {
+ "tda9850",
+ MODULEVENDORSTRING,
+ MODINFOSTRING1,
+ MODINFOSTRING2,
+ XORG_VERSION_CURRENT,
+ 1, 0, 0,
+ ABI_CLASS_VIDEODRV, /* This needs the video driver ABI */
+ ABI_VIDEODRV_VERSION,
+ MOD_CLASS_NONE,
+ {0, 0, 0, 0}
+};
+
+_X_EXPORT XF86ModuleData tda9850ModuleData = {
+ &tda9850VersRec,
+ NULL,
+ NULL
+};
diff --git a/xorg-server/hw/xfree86/i2c/tda9885.c b/xorg-server/hw/xfree86/i2c/tda9885.c
index f22233995..fd859bde0 100644
--- a/xorg-server/hw/xfree86/i2c/tda9885.c
+++ b/xorg-server/hw/xfree86/i2c/tda9885.c
@@ -1,104 +1,100 @@
-#ifdef HAVE_XORG_CONFIG_H
-#include <xorg-config.h>
-#endif
-
-#include "xf86.h"
-#include "xf86i2c.h"
-#include "tda9885.h"
-#include "i2c_def.h"
-
-
-TDA9885Ptr Detect_tda9885(I2CBusPtr b, I2CSlaveAddr addr)
-{
- TDA9885Ptr t;
- I2CByte a;
-
- t = calloc(1, sizeof(TDA9885Rec));
- if(t == NULL) return NULL;
- switch(addr)
- {
- case TDA9885_ADDR_1:
- case TDA9885_ADDR_2:
- case TDA9885_ADDR_3:
- case TDA9885_ADDR_4:
- t->d.DevName = "TDA9885 Alignment-free IF-PLL";
- break;
- default:
- t->d.DevName = "Generic TDAxxxx";
- break;
- }
- t->d.SlaveAddr = addr;
- t->d.pI2CBus = b;
- t->d.NextDev = NULL;
- t->d.StartTimeout = b->StartTimeout;
- t->d.BitTimeout = b->BitTimeout;
- t->d.AcknTimeout = b->AcknTimeout;
- t->d.ByteTimeout = b->ByteTimeout;
-
- if(!I2C_WriteRead(&(t->d), NULL, 0, &a, 1))
- {
- free(t);
- return NULL;
- }
-
- /* set default parameters */
- if(!I2CDevInit(&(t->d)))
- {
- free(t);
- return NULL;
- }
-
- return t;
-}
-
-Bool tda9885_init(TDA9885Ptr t)
-{
- t->forced_mute_audio=1;
- return TRUE;
-}
-
-void tda9885_getstatus(TDA9885Ptr t)
-{
-CARD8 value;
-
-I2C_WriteRead(&(t->d), NULL, 0, &value, 1);
-t->after_reset=value & 1;
-t->afc_status=(value >> 1) & 0xf;
-t->fm_carrier=(value>>5)& 1;
-t->vif_level=(value >>6) & 1;
-t->afc_win=(value >> 7)&1;
-}
-
-void tda9885_setparameters(TDA9885Ptr t)
-{
-CARD8 data[4];
-
-data[0]=0; /* start with subaddress 0 */
-data[1]=(t->sound_trap & 1) |
- ((t->auto_mute_fm &1)<<1) |
- ((t->carrier_mode &1)<<2) |
- ((t->modulation &3)<<3) |
- ((t->forced_mute_audio &1)<<5) |
- ((t->port1 & 1)<<6) |
- ((t->port2 &1)<<7); /* B data */
-data[2]=(t->top_adjustment & 0x1f) |
- ((t->deemphasis & 0x3)<<5) |
- ((t->audio_gain & 1) << 7); /* C data */
-data[3]=(t->standard_sound_carrier & 0x3) |
- ((t->standard_video_if & 0x07)<<2) |
- ((t->minimum_gain & 0x01)<<5) |
- ((t->gating & 0x01)<<6) |
- ((t->vif_agc & 0x01)<<7); /* E data */
-
-I2C_WriteRead(&(t->d), data, 4, NULL, 0);
-
-xf86DrvMsg(t->d.pI2CBus->scrnIndex,X_INFO,"TDA9885 setparam: B data: %x, C data: %x, E data: %x\n", data[1], data[2], data[3]);
-}
-
-void tda9885_dumpstatus(TDA9885Ptr t)
-{
-xf86DrvMsg(t->d.pI2CBus->scrnIndex,X_INFO,"TDA9885 status: after_reset=%d afc_status=%d (%3.1f kHz off) fm_carrier=%d vif_level=%d afc_win=%d %s\n",
- t->after_reset, t->afc_status,
- (t->afc_status<8)?-12.5-t->afc_status*25.0:-12.5+(16-t->afc_status)*25.0,
- t->fm_carrier, t->vif_level, t->afc_win, t->afc_win?"VCO in": "VCO out");
-}
+#ifdef HAVE_XORG_CONFIG_H
+#include <xorg-config.h>
+#endif
+
+#include "xf86.h"
+#include "xf86i2c.h"
+#include "tda9885.h"
+#include "i2c_def.h"
+
+TDA9885Ptr
+Detect_tda9885(I2CBusPtr b, I2CSlaveAddr addr)
+{
+ TDA9885Ptr t;
+ I2CByte a;
+
+ t = calloc(1, sizeof(TDA9885Rec));
+ if (t == NULL)
+ return NULL;
+ switch (addr) {
+ case TDA9885_ADDR_1:
+ case TDA9885_ADDR_2:
+ case TDA9885_ADDR_3:
+ case TDA9885_ADDR_4:
+ t->d.DevName = "TDA9885 Alignment-free IF-PLL";
+ break;
+ default:
+ t->d.DevName = "Generic TDAxxxx";
+ break;
+ }
+ t->d.SlaveAddr = addr;
+ t->d.pI2CBus = b;
+ t->d.NextDev = NULL;
+ t->d.StartTimeout = b->StartTimeout;
+ t->d.BitTimeout = b->BitTimeout;
+ t->d.AcknTimeout = b->AcknTimeout;
+ t->d.ByteTimeout = b->ByteTimeout;
+
+ if (!I2C_WriteRead(&(t->d), NULL, 0, &a, 1)) {
+ free(t);
+ return NULL;
+ }
+
+ /* set default parameters */
+ if (!I2CDevInit(&(t->d))) {
+ free(t);
+ return NULL;
+ }
+
+ return t;
+}
+
+Bool
+tda9885_init(TDA9885Ptr t)
+{
+ t->forced_mute_audio = 1;
+ return TRUE;
+}
+
+void
+tda9885_getstatus(TDA9885Ptr t)
+{
+ CARD8 value;
+
+ I2C_WriteRead(&(t->d), NULL, 0, &value, 1);
+ t->after_reset = value & 1;
+ t->afc_status = (value >> 1) & 0xf;
+ t->fm_carrier = (value >> 5) & 1;
+ t->vif_level = (value >> 6) & 1;
+ t->afc_win = (value >> 7) & 1;
+}
+
+void
+tda9885_setparameters(TDA9885Ptr t)
+{
+ CARD8 data[4];
+
+ data[0] = 0; /* start with subaddress 0 */
+ data[1] = (t->sound_trap & 1) | ((t->auto_mute_fm & 1) << 1) | ((t->carrier_mode & 1) << 2) | ((t->modulation & 3) << 3) | ((t->forced_mute_audio & 1) << 5) | ((t->port1 & 1) << 6) | ((t->port2 & 1) << 7); /* B data */
+ data[2] = (t->top_adjustment & 0x1f) | ((t->deemphasis & 0x3) << 5) | ((t->audio_gain & 1) << 7); /* C data */
+ data[3] = (t->standard_sound_carrier & 0x3) | ((t->standard_video_if & 0x07) << 2) | ((t->minimum_gain & 0x01) << 5) | ((t->gating & 0x01) << 6) | ((t->vif_agc & 0x01) << 7); /* E data */
+
+ I2C_WriteRead(&(t->d), data, 4, NULL, 0);
+
+ xf86DrvMsg(t->d.pI2CBus->scrnIndex, X_INFO,
+ "TDA9885 setparam: B data: %x, C data: %x, E data: %x\n",
+ data[1], data[2], data[3]);
+}
+
+void
+tda9885_dumpstatus(TDA9885Ptr t)
+{
+ xf86DrvMsg(t->d.pI2CBus->scrnIndex, X_INFO,
+ "TDA9885 status: after_reset=%d afc_status=%d (%3.1f kHz off) fm_carrier=%d vif_level=%d afc_win=%d %s\n",
+ t->after_reset, t->afc_status,
+ (t->afc_status <
+ 8) ? -12.5 - t->afc_status * 25.0 : -12.5 + (16 -
+ t->afc_status) *
+ 25.0, t->fm_carrier, t->vif_level, t->afc_win,
+ t->afc_win ? "VCO in" : "VCO out");
+}
diff --git a/xorg-server/hw/xfree86/i2c/tda9885_module.c b/xorg-server/hw/xfree86/i2c/tda9885_module.c
index 51eaca7e8..e71bd6061 100644
--- a/xorg-server/hw/xfree86/i2c/tda9885_module.c
+++ b/xorg-server/hw/xfree86/i2c/tda9885_module.c
@@ -1,25 +1,24 @@
-#ifdef HAVE_XORG_CONFIG_H
-#include <xorg-config.h>
-#endif
-
-#include "xf86Module.h"
-
-static XF86ModuleVersionInfo tda9885VersRec =
-{
- "tda9885",
- MODULEVENDORSTRING,
- MODINFOSTRING1,
- MODINFOSTRING2,
- XORG_VERSION_CURRENT,
- 1, 0, 0,
- ABI_CLASS_VIDEODRV, /* This needs the video driver ABI */
- ABI_VIDEODRV_VERSION,
- MOD_CLASS_NONE,
- {0,0,0,0}
-};
-
-_X_EXPORT XF86ModuleData tda9885ModuleData = {
- &tda9885VersRec,
- NULL,
- NULL
-};
+#ifdef HAVE_XORG_CONFIG_H
+#include <xorg-config.h>
+#endif
+
+#include "xf86Module.h"
+
+static XF86ModuleVersionInfo tda9885VersRec = {
+ "tda9885",
+ MODULEVENDORSTRING,
+ MODINFOSTRING1,
+ MODINFOSTRING2,
+ XORG_VERSION_CURRENT,
+ 1, 0, 0,
+ ABI_CLASS_VIDEODRV, /* This needs the video driver ABI */
+ ABI_VIDEODRV_VERSION,
+ MOD_CLASS_NONE,
+ {0, 0, 0, 0}
+};
+
+_X_EXPORT XF86ModuleData tda9885ModuleData = {
+ &tda9885VersRec,
+ NULL,
+ NULL
+};
diff --git a/xorg-server/hw/xfree86/i2c/uda1380.c b/xorg-server/hw/xfree86/i2c/uda1380.c
index eebe127ed..87226877b 100644
--- a/xorg-server/hw/xfree86/i2c/uda1380.c
+++ b/xorg-server/hw/xfree86/i2c/uda1380.c
@@ -1,183 +1,196 @@
-/*************************************************************************************
- * Copyright (C) 2005 Bogdan D. bogdand@users.sourceforge.net
- *
- * Permission is hereby granted, free of charge, to any person obtaining a copy of this
- * software and associated documentation files (the "Software"), to deal in the Software
- * without restriction, including without limitation the rights to use, copy, modify,
- * merge, publish, distribute, sublicense, and/or sell copies of the Software,
- * and to permit persons to whom the Software is furnished to do so, subject to the following conditions:
- *
- * The above copyright notice and this permission notice shall be included in all copies or
- * substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED,
- * INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE
- * AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY CLAIM,
- * DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
- * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
- *
- * Except as contained in this notice, the name of the author shall not be used in advertising or
- * otherwise to promote the sale, use or other dealings in this Software without prior written
- * authorization from the author.
- *
- ************************************************************************************/
-
-#ifdef HAVE_XORG_CONFIG_H
-#include <xorg-config.h>
-#endif
-
-#include "xf86.h"
-#include "xf86i2c.h"
-#include "uda1380.h"
-#include "i2c_def.h"
-
-UDA1380Ptr Detect_uda1380(I2CBusPtr b, I2CSlaveAddr addr)
-{
- UDA1380Ptr t;
- I2CByte a;
-
- t = calloc(1, sizeof(UDA1380Rec));
- if(t == NULL) return NULL;
- switch(addr)
- {
- case UDA1380_ADDR_1:
- case UDA1380_ADDR_2:
- t->d.DevName = "UDA1380 Stereo audion coder-decoder";
- break;
- default:
- t->d.DevName = "Generic UDAxxxx";
- break;
- }
- t->d.SlaveAddr = addr;
- t->d.pI2CBus = b;
- t->d.NextDev = NULL;
- t->d.StartTimeout = b->StartTimeout;
- t->d.BitTimeout = b->BitTimeout;
- t->d.AcknTimeout = b->AcknTimeout;
- t->d.ByteTimeout = b->ByteTimeout;
-
- if(!I2C_WriteRead(&(t->d), NULL, 0, &a, 1))
- {
- free(t);
- return NULL;
- }
-
- /* set default parameters */
- if(!I2CDevInit(&(t->d)))
- {
- free(t);
- return NULL;
- }
-
- xf86DrvMsg(t->d.pI2CBus->scrnIndex,X_INFO,"UDA1380 stereo coder-decoder detected\n");
-
- return t;
-}
-
-Bool uda1380_init(UDA1380Ptr t)
-{
- CARD8 data[3];
- CARD16 tmp;
- Bool ret;
-
- /* Power control */
- data[0] = 0x02;
- tmp = (1 << 13) | (1 << 10) | ( 1 << 8) | (1 << 7) | (1 << 6) | (1 << 3) | (1 << 1);
- data[1] = (CARD8)((tmp >> 8) & 0xff);
- data[2] = (CARD8)(tmp & 0xff);
- ret = I2C_WriteRead(&(t->d), data, 3, NULL, 0);
- if (ret == FALSE)
- {
- xf86DrvMsg(t->d.pI2CBus->scrnIndex,X_INFO,"UDA1380 failed to initialize\n");
- return FALSE;
- }
-
- /* Analog mixer (AVC) */
- data[0] = 0x03;
- /* the analog mixer is muted initially */
- data[1] = 0x3f;
- data[2] = 0x3f;
- ret = I2C_WriteRead(&(t->d), data, 3, NULL, 0);
- if (ret == FALSE)
- {
- xf86DrvMsg(t->d.pI2CBus->scrnIndex,X_INFO,"UDA1380 failed to initialize\n");
- return FALSE;
- }
-
- xf86DrvMsg(t->d.pI2CBus->scrnIndex,X_INFO,"UDA1380 initialized\n");
-
- return TRUE;
-}
-
-void uda1380_shutdown(UDA1380Ptr t)
-{
- CARD8 data[3];
- Bool ret;
-
- /* Power control */
- data[0] = 0x02;
- data[1] = 0;
- data[2] = 0;
- ret = I2C_WriteRead(&(t->d), data, 3, NULL, 0);
- if (ret == FALSE)
- xf86DrvMsg(t->d.pI2CBus->scrnIndex,X_INFO,"UDA1380 failed to shutdown\n");
-}
-
-void uda1380_setvolume(UDA1380Ptr t, INT32 value)
-{
- CARD8 data[3];
- /*
- * We have to scale the value ranging from -1000 to 1000 to 0x2c to 0
- */
- CARD8 volume = 47 - (CARD8)((value + 1000) * 47 / 2000);
- Bool ret;
-
- t->analog_mixer_settings = ((volume << 8) & 0x3f00) | (volume & 0x3f);
-
- /* Analog mixer (AVC) */
- data[0] = 0x03;
- data[1] = volume & 0x3f;
- data[2] = volume & 0x3f;
- ret = I2C_WriteRead(&(t->d), data, 3, NULL, 0);
- if (ret == FALSE)
- xf86DrvMsg(t->d.pI2CBus->scrnIndex,X_INFO,"UDA1380 failed to set volume\n");
-}
-
-void uda1380_mute(UDA1380Ptr t, Bool mute)
-{
- CARD8 data[3];
- Bool ret;
-
- if (mute == TRUE)
- {
- /* Analog mixer (AVC) */
- data[0] = 0x03;
- data[1] = 0xff;
- data[2] = 0xff;
- ret = I2C_WriteRead(&(t->d), data, 3, NULL, 0);
- if (ret == FALSE)
- xf86DrvMsg(t->d.pI2CBus->scrnIndex,X_INFO,"UDA1380 failed to mute\n");
- }
- else
- {
- /* Analog mixer (AVC) */
- data[0] = 0x03;
- data[1] = (CARD8)((t->analog_mixer_settings >> 8) & 0x3f);
- data[2] = (CARD8)(t->analog_mixer_settings & 0x3f);
- ret = I2C_WriteRead(&(t->d), data, 3, NULL, 0);
- if (ret == FALSE)
- xf86DrvMsg(t->d.pI2CBus->scrnIndex,X_INFO,"UDA1380 failed to unmute\n");
- }
-}
-
-void uda1380_getstatus(UDA1380Ptr t)
-{
-}
-
-void uda1380_setparameters(UDA1380Ptr t)
-{
-}
-
-void uda1380_dumpstatus(UDA1380Ptr t)
-{
-}
+/*************************************************************************************
+ * Copyright (C) 2005 Bogdan D. bogdand@users.sourceforge.net
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy of this
+ * software and associated documentation files (the "Software"), to deal in the Software
+ * without restriction, including without limitation the rights to use, copy, modify,
+ * merge, publish, distribute, sublicense, and/or sell copies of the Software,
+ * and to permit persons to whom the Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in all copies or
+ * substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED,
+ * INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE
+ * AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY CLAIM,
+ * DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
+ *
+ * Except as contained in this notice, the name of the author shall not be used in advertising or
+ * otherwise to promote the sale, use or other dealings in this Software without prior written
+ * authorization from the author.
+ *
+ ************************************************************************************/
+
+#ifdef HAVE_XORG_CONFIG_H
+#include <xorg-config.h>
+#endif
+
+#include "xf86.h"
+#include "xf86i2c.h"
+#include "uda1380.h"
+#include "i2c_def.h"
+
+UDA1380Ptr
+Detect_uda1380(I2CBusPtr b, I2CSlaveAddr addr)
+{
+ UDA1380Ptr t;
+ I2CByte a;
+
+ t = calloc(1, sizeof(UDA1380Rec));
+ if (t == NULL)
+ return NULL;
+ switch (addr) {
+ case UDA1380_ADDR_1:
+ case UDA1380_ADDR_2:
+ t->d.DevName = "UDA1380 Stereo audion coder-decoder";
+ break;
+ default:
+ t->d.DevName = "Generic UDAxxxx";
+ break;
+ }
+ t->d.SlaveAddr = addr;
+ t->d.pI2CBus = b;
+ t->d.NextDev = NULL;
+ t->d.StartTimeout = b->StartTimeout;
+ t->d.BitTimeout = b->BitTimeout;
+ t->d.AcknTimeout = b->AcknTimeout;
+ t->d.ByteTimeout = b->ByteTimeout;
+
+ if (!I2C_WriteRead(&(t->d), NULL, 0, &a, 1)) {
+ free(t);
+ return NULL;
+ }
+
+ /* set default parameters */
+ if (!I2CDevInit(&(t->d))) {
+ free(t);
+ return NULL;
+ }
+
+ xf86DrvMsg(t->d.pI2CBus->scrnIndex, X_INFO,
+ "UDA1380 stereo coder-decoder detected\n");
+
+ return t;
+}
+
+Bool
+uda1380_init(UDA1380Ptr t)
+{
+ CARD8 data[3];
+ CARD16 tmp;
+ Bool ret;
+
+ /* Power control */
+ data[0] = 0x02;
+ tmp =
+ (1 << 13) | (1 << 10) | (1 << 8) | (1 << 7) | (1 << 6) | (1 << 3) | (1
+ <<
+ 1);
+ data[1] = (CARD8) ((tmp >> 8) & 0xff);
+ data[2] = (CARD8) (tmp & 0xff);
+ ret = I2C_WriteRead(&(t->d), data, 3, NULL, 0);
+ if (ret == FALSE) {
+ xf86DrvMsg(t->d.pI2CBus->scrnIndex, X_INFO,
+ "UDA1380 failed to initialize\n");
+ return FALSE;
+ }
+
+ /* Analog mixer (AVC) */
+ data[0] = 0x03;
+ /* the analog mixer is muted initially */
+ data[1] = 0x3f;
+ data[2] = 0x3f;
+ ret = I2C_WriteRead(&(t->d), data, 3, NULL, 0);
+ if (ret == FALSE) {
+ xf86DrvMsg(t->d.pI2CBus->scrnIndex, X_INFO,
+ "UDA1380 failed to initialize\n");
+ return FALSE;
+ }
+
+ xf86DrvMsg(t->d.pI2CBus->scrnIndex, X_INFO, "UDA1380 initialized\n");
+
+ return TRUE;
+}
+
+void
+uda1380_shutdown(UDA1380Ptr t)
+{
+ CARD8 data[3];
+ Bool ret;
+
+ /* Power control */
+ data[0] = 0x02;
+ data[1] = 0;
+ data[2] = 0;
+ ret = I2C_WriteRead(&(t->d), data, 3, NULL, 0);
+ if (ret == FALSE)
+ xf86DrvMsg(t->d.pI2CBus->scrnIndex, X_INFO,
+ "UDA1380 failed to shutdown\n");
+}
+
+void
+uda1380_setvolume(UDA1380Ptr t, INT32 value)
+{
+ CARD8 data[3];
+
+ /*
+ * We have to scale the value ranging from -1000 to 1000 to 0x2c to 0
+ */
+ CARD8 volume = 47 - (CARD8) ((value + 1000) * 47 / 2000);
+ Bool ret;
+
+ t->analog_mixer_settings = ((volume << 8) & 0x3f00) | (volume & 0x3f);
+
+ /* Analog mixer (AVC) */
+ data[0] = 0x03;
+ data[1] = volume & 0x3f;
+ data[2] = volume & 0x3f;
+ ret = I2C_WriteRead(&(t->d), data, 3, NULL, 0);
+ if (ret == FALSE)
+ xf86DrvMsg(t->d.pI2CBus->scrnIndex, X_INFO,
+ "UDA1380 failed to set volume\n");
+}
+
+void
+uda1380_mute(UDA1380Ptr t, Bool mute)
+{
+ CARD8 data[3];
+ Bool ret;
+
+ if (mute == TRUE) {
+ /* Analog mixer (AVC) */
+ data[0] = 0x03;
+ data[1] = 0xff;
+ data[2] = 0xff;
+ ret = I2C_WriteRead(&(t->d), data, 3, NULL, 0);
+ if (ret == FALSE)
+ xf86DrvMsg(t->d.pI2CBus->scrnIndex, X_INFO,
+ "UDA1380 failed to mute\n");
+ }
+ else {
+ /* Analog mixer (AVC) */
+ data[0] = 0x03;
+ data[1] = (CARD8) ((t->analog_mixer_settings >> 8) & 0x3f);
+ data[2] = (CARD8) (t->analog_mixer_settings & 0x3f);
+ ret = I2C_WriteRead(&(t->d), data, 3, NULL, 0);
+ if (ret == FALSE)
+ xf86DrvMsg(t->d.pI2CBus->scrnIndex, X_INFO,
+ "UDA1380 failed to unmute\n");
+ }
+}
+
+void
+uda1380_getstatus(UDA1380Ptr t)
+{
+}
+
+void
+uda1380_setparameters(UDA1380Ptr t)
+{
+}
+
+void
+uda1380_dumpstatus(UDA1380Ptr t)
+{
+}
diff --git a/xorg-server/hw/xfree86/i2c/uda1380_module.c b/xorg-server/hw/xfree86/i2c/uda1380_module.c
index 203055d46..dca834b12 100644
--- a/xorg-server/hw/xfree86/i2c/uda1380_module.c
+++ b/xorg-server/hw/xfree86/i2c/uda1380_module.c
@@ -1,25 +1,24 @@
-#ifdef HAVE_XORG_CONFIG_H
-#include <xorg-config.h>
-#endif
-
-#include "xf86Module.h"
-
-static XF86ModuleVersionInfo uda1380VersRec =
-{
- "uda1380",
- MODULEVENDORSTRING,
- MODINFOSTRING1,
- MODINFOSTRING2,
- XORG_VERSION_CURRENT,
- 1, 0, 0,
- ABI_CLASS_VIDEODRV, /* This needs the video driver ABI */
- ABI_VIDEODRV_VERSION,
- MOD_CLASS_NONE,
- {0,0,0,0}
-};
-
-_X_EXPORT XF86ModuleData uda1380ModuleData = {
- &uda1380VersRec,
- NULL,
- NULL
-};
+#ifdef HAVE_XORG_CONFIG_H
+#include <xorg-config.h>
+#endif
+
+#include "xf86Module.h"
+
+static XF86ModuleVersionInfo uda1380VersRec = {
+ "uda1380",
+ MODULEVENDORSTRING,
+ MODINFOSTRING1,
+ MODINFOSTRING2,
+ XORG_VERSION_CURRENT,
+ 1, 0, 0,
+ ABI_CLASS_VIDEODRV, /* This needs the video driver ABI */
+ ABI_VIDEODRV_VERSION,
+ MOD_CLASS_NONE,
+ {0, 0, 0, 0}
+};
+
+_X_EXPORT XF86ModuleData uda1380ModuleData = {
+ &uda1380VersRec,
+ NULL,
+ NULL
+};
diff --git a/xorg-server/hw/xfree86/i2c/xf86i2c.c b/xorg-server/hw/xfree86/i2c/xf86i2c.c
index 488b6815f..1273f4bab 100644
--- a/xorg-server/hw/xfree86/i2c/xf86i2c.c
+++ b/xorg-server/hw/xfree86/i2c/xf86i2c.c
@@ -1,866 +1,879 @@
-/*
- * Copyright (C) 1998 Itai Nahshon, Michael Schimek
- *
- * The original code was derived from and inspired by
- * the I2C driver from the Linux kernel.
- * (c) 1998 Gerd Knorr <kraxel@cs.tu-berlin.de>
- */
-
-
-#ifdef HAVE_XORG_CONFIG_H
-#include <xorg-config.h>
-#endif
-
-#include <sys/time.h>
-#include <string.h>
-
-#include "misc.h"
-#include "xf86.h"
-#include "xf86_OSproc.h"
-
-#include <X11/X.h>
-#include <X11/Xos.h>
-#include <X11/Xproto.h>
-#include "scrnintstr.h"
-#include "regionstr.h"
-#include "windowstr.h"
-#include "pixmapstr.h"
-#include "validate.h"
-#include "resource.h"
-#include "gcstruct.h"
-#include "dixstruct.h"
-
-#include "xf86i2c.h"
-
-#define I2C_TIMEOUT(x) /*(x)*/ /* Report timeouts */
-#define I2C_TRACE(x) /*(x)*/ /* Report progress */
-
-/* This is the default I2CUDelay function if not supplied by the driver.
- * High level I2C interfaces implementing the bus protocol in hardware
- * should supply this function too.
- *
- * Delay execution at least usec microseconds.
- * All values 0 to 1e6 inclusive must be expected.
- */
-
-static void
-I2CUDelay(I2CBusPtr b, int usec)
-{
- struct timeval begin, cur;
- long d_secs, d_usecs;
- long diff;
-
- if (usec > 0) {
- X_GETTIMEOFDAY(&begin);
- do {
- /* It would be nice to use {xf86}usleep,
- * but usleep (1) takes >10000 usec !
- */
- X_GETTIMEOFDAY(&cur);
- d_secs = (cur.tv_sec - begin.tv_sec);
- d_usecs = (cur.tv_usec - begin.tv_usec);
- diff = d_secs*1000000 + d_usecs;
- } while (diff>=0 && diff< (usec + 1));
- }
-}
-
-/* Most drivers will register just with GetBits/PutBits functions.
- * The following functions implement a software I2C protocol
- * by using the promitive functions given by the driver.
- * ================================================================
- *
- * It is assumed that there is just one master on the I2C bus, therefore
- * there is no explicit test for conflits.
- */
-
-#define RISEFALLTIME 2 /* usec, actually 300 to 1000 ns according to the i2c specs */
-
-/* Some devices will hold SCL low to slow down the bus or until
- * ready for transmission.
- *
- * This condition will be noticed when the master tries to raise
- * the SCL line. You can set the timeout to zero if the slave device
- * does not support this clock synchronization.
- */
-
-static Bool
-I2CRaiseSCL(I2CBusPtr b, int sda, int timeout)
-{
- int i, scl;
-
- b->I2CPutBits(b, 1, sda);
- b->I2CUDelay(b, b->RiseFallTime);
-
- for (i = timeout; i > 0; i -= b->RiseFallTime) {
- b->I2CGetBits(b, &scl, &sda);
- if (scl) break;
- b->I2CUDelay(b, b->RiseFallTime);
- }
-
- if (i <= 0) {
- I2C_TIMEOUT(ErrorF("[I2CRaiseSCL(<%s>, %d, %d) timeout]", b->BusName, sda, timeout));
- return FALSE;
- }
-
- return TRUE;
-}
-
-/* Send a start signal on the I2C bus. The start signal notifies
- * devices that a new transaction is initiated by the bus master.
- *
- * The start signal is always followed by a slave address.
- * Slave addresses are 8+ bits. The first 7 bits identify the
- * device and the last bit signals if this is a read (1) or
- * write (0) operation.
- *
- * There may be more than one start signal on one transaction.
- * This happens for example on some devices that allow reading
- * of registers. First send a start bit followed by the device
- * address (with the last bit 0) and the register number. Then send
- * a new start bit with the device address (with the last bit 1)
- * and then read the value from the device.
- *
- * Note this is function does not implement a multiple master
- * arbitration procedure.
- */
-
-static Bool
-I2CStart(I2CBusPtr b, int timeout)
-{
- if (!I2CRaiseSCL(b, 1, timeout))
- return FALSE;
-
- b->I2CPutBits(b, 1, 0);
- b->I2CUDelay(b, b->HoldTime);
- b->I2CPutBits(b, 0, 0);
- b->I2CUDelay(b, b->HoldTime);
-
- I2C_TRACE(ErrorF("\ni2c: <"));
-
- return TRUE;
-}
-
-/* This is the default I2CStop function if not supplied by the driver.
- *
- * Signal devices on the I2C bus that a transaction on the
- * bus has finished. There may be more than one start signal
- * on a transaction but only one stop signal.
- */
-
-static void
-I2CStop(I2CDevPtr d)
-{
- I2CBusPtr b = d->pI2CBus;
-
- b->I2CPutBits(b, 0, 0);
- b->I2CUDelay(b, b->RiseFallTime);
-
- b->I2CPutBits(b, 1, 0);
- b->I2CUDelay(b, b->HoldTime);
- b->I2CPutBits(b, 1, 1);
- b->I2CUDelay(b, b->HoldTime);
-
- I2C_TRACE(ErrorF(">\n"));
-}
-
-/* Write/Read a single bit to/from a device.
- * Return FALSE if a timeout occurs.
- */
-
-static Bool
-I2CWriteBit(I2CBusPtr b, int sda, int timeout)
-{
- Bool r;
-
- b->I2CPutBits(b, 0, sda);
- b->I2CUDelay(b, b->RiseFallTime);
-
- r = I2CRaiseSCL(b, sda, timeout);
- b->I2CUDelay(b, b->HoldTime);
-
- b->I2CPutBits(b, 0, sda);
- b->I2CUDelay(b, b->HoldTime);
-
- return r;
-}
-
-static Bool
-I2CReadBit(I2CBusPtr b, int *psda, int timeout)
-{
- Bool r;
- int scl;
-
- r = I2CRaiseSCL(b, 1, timeout);
- b->I2CUDelay(b, b->HoldTime);
-
- b->I2CGetBits(b, &scl, psda);
-
- b->I2CPutBits(b, 0, 1);
- b->I2CUDelay(b, b->HoldTime);
-
- return r;
-}
-
-/* This is the default I2CPutByte function if not supplied by the driver.
- *
- * A single byte is sent to the device.
- * The function returns FALSE if a timeout occurs, you should send
- * a stop condition afterwards to reset the bus.
- *
- * A timeout occurs,
- * if the slave pulls SCL to slow down the bus more than ByteTimeout usecs,
- * or slows down the bus for more than BitTimeout usecs for each bit,
- * or does not send an ACK bit (0) to acknowledge the transmission within
- * AcknTimeout usecs, but a NACK (1) bit.
- *
- * AcknTimeout must be at least b->HoldTime, the other timeouts can be
- * zero according to the comment on I2CRaiseSCL.
- */
-
-static Bool
-I2CPutByte(I2CDevPtr d, I2CByte data)
-{
- Bool r;
- int i, scl, sda;
- I2CBusPtr b = d->pI2CBus;
-
- if (!I2CWriteBit(b, (data >> 7) & 1, d->ByteTimeout))
- return FALSE;
-
- for (i = 6; i >= 0; i--)
- if (!I2CWriteBit(b, (data >> i) & 1, d->BitTimeout))
- return FALSE;
-
- b->I2CPutBits(b, 0, 1);
- b->I2CUDelay(b, b->RiseFallTime);
-
- r = I2CRaiseSCL(b, 1, b->HoldTime);
-
- if (r) {
- for (i = d->AcknTimeout; i > 0; i -= b->HoldTime) {
- b->I2CUDelay(b, b->HoldTime);
- b->I2CGetBits(b, &scl, &sda);
- if (sda == 0) break;
- }
-
- if (i <= 0) {
- I2C_TIMEOUT(ErrorF("[I2CPutByte(<%s>, 0x%02x, %d, %d, %d) timeout]",
- b->BusName, data, d->BitTimeout,
- d->ByteTimeout, d->AcknTimeout));
- r = FALSE;
- }
-
- I2C_TRACE(ErrorF("W%02x%c ", (int) data, sda ? '-' : '+'));
- }
-
- b->I2CPutBits(b, 0, 1);
- b->I2CUDelay(b, b->HoldTime);
-
- return r;
-}
-
-/* This is the default I2CGetByte function if not supplied by the driver.
- *
- * A single byte is read from the device.
- * The function returns FALSE if a timeout occurs, you should send
- * a stop condition afterwards to reset the bus.
- *
- * A timeout occurs,
- * if the slave pulls SCL to slow down the bus more than ByteTimeout usecs,
- * or slows down the bus for more than b->BitTimeout usecs for each bit.
- *
- * ByteTimeout must be at least b->HoldTime, the other timeouts can be
- * zero according to the comment on I2CRaiseSCL.
- *
- * For the <last> byte in a sequence the acknowledge bit NACK (1),
- * otherwise ACK (0) will be sent.
- */
-
-static Bool
-I2CGetByte(I2CDevPtr d, I2CByte *data, Bool last)
-{
- int i, sda;
- I2CBusPtr b = d->pI2CBus;
-
- b->I2CPutBits(b, 0, 1);
- b->I2CUDelay(b, b->RiseFallTime);
-
- if (!I2CReadBit(b, &sda, d->ByteTimeout))
- return FALSE;
-
- *data = (sda > 0) << 7;
-
- for (i = 6; i >= 0; i--)
- if (!I2CReadBit(b, &sda, d->BitTimeout))
- return FALSE;
- else
- *data |= (sda > 0) << i;
-
- if (!I2CWriteBit(b, last ? 1 : 0, d->BitTimeout))
- return FALSE;
-
- I2C_TRACE(ErrorF("R%02x%c ", (int) *data, last ? '+' : '-'));
-
- return TRUE;
-}
-
-/* This is the default I2CAddress function if not supplied by the driver.
- *
- * It creates the start condition, followed by the d->SlaveAddr.
- * Higher level functions must call this routine rather than
- * I2CStart/PutByte because a hardware I2C master may not be able
- * to send a slave address without a start condition.
- *
- * The same timeouts apply as with I2CPutByte and additional a
- * StartTimeout, similar to the ByteTimeout but for the start
- * condition.
- *
- * In case of a timeout, the bus is left in a clean idle condition.
- * I. e. you *must not* send a Stop. If this function succeeds, you *must*.
- *
- * The slave address format is 16 bit, with the legacy _8_bit_ slave address
- * in the least significant byte. This is, the slave address must include the
- * R/_W flag as least significant bit.
- *
- * The most significant byte of the address will be sent _after_ the LSB,
- * but only if the LSB indicates:
- * a) an 11 bit address, this is LSB = 1111 0xxx.
- * b) a 'general call address', this is LSB = 0000 000x - see the I2C specs
- * for more.
- */
-
-static Bool
-I2CAddress(I2CDevPtr d, I2CSlaveAddr addr)
-{
- if (I2CStart(d->pI2CBus, d->StartTimeout)) {
- if (I2CPutByte(d, addr & 0xFF)) {
- if ((addr & 0xF8) != 0xF0 &&
- (addr & 0xFE) != 0x00)
- return TRUE;
-
- if (I2CPutByte(d, (addr >> 8) & 0xFF))
- return TRUE;
- }
-
- I2CStop(d);
- }
-
- return FALSE;
-}
-
-/* These are the hardware independent I2C helper functions.
- * ========================================================
- */
-
-/* Function for probing. Just send the slave address
- * and return true if the device responds. The slave address
- * must have the lsb set to reflect a read (1) or write (0) access.
- * Don't expect a read- or write-only device will respond otherwise.
- */
-
-Bool
-xf86I2CProbeAddress(I2CBusPtr b, I2CSlaveAddr addr)
-{
- int r;
- I2CDevRec d;
-
- d.DevName = "Probing";
- d.BitTimeout = b->BitTimeout;
- d.ByteTimeout = b->ByteTimeout;
- d.AcknTimeout = b->AcknTimeout;
- d.StartTimeout = b->StartTimeout;
- d.SlaveAddr = addr;
- d.pI2CBus = b;
- d.NextDev = NULL;
-
- r = b->I2CAddress(&d, addr);
-
- if (r) b->I2CStop(&d);
-
- return r;
-}
-
-/* All functions below are related to devices and take the
- * slave address and timeout values from an I2CDevRec. They
- * return FALSE in case of an error (presumably a timeout).
- */
-
-/* General purpose read and write function.
- *
- * 1st, if nWrite > 0
- * Send a start condition
- * Send the slave address (1 or 2 bytes) with write flag
- * Write n bytes from WriteBuffer
- * 2nd, if nRead > 0
- * Send a start condition [again]
- * Send the slave address (1 or 2 bytes) with read flag
- * Read n bytes to ReadBuffer
- * 3rd, if a Start condition has been successfully sent,
- * Send a Stop condition.
- *
- * The functions exits immediately when an error occures,
- * not proceeding any data left. However, step 3 will
- * be executed anyway to leave the bus in clean idle state.
- */
-
-static Bool
-I2CWriteRead(I2CDevPtr d,
- I2CByte *WriteBuffer, int nWrite,
- I2CByte *ReadBuffer, int nRead)
-{
- Bool r = TRUE;
- I2CBusPtr b = d->pI2CBus;
- int s = 0;
-
- if (r && nWrite > 0) {
- r = b->I2CAddress(d, d->SlaveAddr & ~1);
- if (r) {
- for (; nWrite > 0; WriteBuffer++, nWrite--)
- if (!(r = b->I2CPutByte(d, *WriteBuffer)))
- break;
- s++;
- }
- }
-
- if (r && nRead > 0) {
- r = b->I2CAddress(d, d->SlaveAddr | 1);
- if (r) {
- for (; nRead > 0; ReadBuffer++, nRead--)
- if (!(r = b->I2CGetByte(d, ReadBuffer, nRead == 1)))
- break;
- s++;
- }
- }
-
- if (s) b->I2CStop(d);
-
- return r;
-}
-
-/* wrapper - for compatibility and convinience */
-
-Bool
-xf86I2CWriteRead(I2CDevPtr d,
- I2CByte *WriteBuffer, int nWrite,
- I2CByte *ReadBuffer, int nRead)
-{
- I2CBusPtr b = d->pI2CBus;
- return b->I2CWriteRead(d,WriteBuffer,nWrite,ReadBuffer,nRead);
-}
-
-/* Read a byte, the only readable register of a device.
- */
-
-Bool
-xf86I2CReadStatus(I2CDevPtr d, I2CByte *pbyte)
-{
- return xf86I2CWriteRead(d, NULL, 0, pbyte, 1);
-}
-
-/* Read a byte from one of the registers determined by its sub-address.
- */
-
-Bool
-xf86I2CReadByte(I2CDevPtr d, I2CByte subaddr, I2CByte *pbyte)
-{
- return xf86I2CWriteRead(d, &subaddr, 1, pbyte, 1);
-}
-
-/* Read bytes from subsequent registers determined by the
- * sub-address of the first register.
- */
-
-Bool
-xf86I2CReadBytes(I2CDevPtr d, I2CByte subaddr, I2CByte *pbyte, int n)
-{
- return xf86I2CWriteRead(d, &subaddr, 1, pbyte, n);
-}
-
-/* Read a word (high byte, then low byte) from one of the registers
- * determined by its sub-address.
- */
-
-Bool
-xf86I2CReadWord(I2CDevPtr d, I2CByte subaddr, unsigned short *pword)
-{
- I2CByte rb[2];
-
- if (!xf86I2CWriteRead(d, &subaddr, 1, rb, 2)) return FALSE;
-
- *pword = (rb[0] << 8) | rb[1];
-
- return TRUE;
-}
-
-/* Write a byte to one of the registers determined by its sub-address.
- */
-
-Bool
-xf86I2CWriteByte(I2CDevPtr d, I2CByte subaddr, I2CByte byte)
-{
- I2CByte wb[2];
-
- wb[0] = subaddr;
- wb[1] = byte;
-
- return xf86I2CWriteRead(d, wb, 2, NULL, 0);
-}
-
-/* Write bytes to subsequent registers determined by the
- * sub-address of the first register.
- */
-
-Bool
-xf86I2CWriteBytes(I2CDevPtr d, I2CByte subaddr,
- I2CByte *WriteBuffer, int nWrite)
-{
- I2CBusPtr b = d->pI2CBus;
- Bool r = TRUE;
-
- if (nWrite > 0) {
- r = b->I2CAddress(d, d->SlaveAddr & ~1);
- if (r){
- if ((r = b->I2CPutByte(d, subaddr)))
- for (; nWrite > 0; WriteBuffer++, nWrite--)
- if (!(r = b->I2CPutByte(d, *WriteBuffer)))
- break;
-
- b->I2CStop(d);
- }
- }
-
- return r;
-}
-
-/* Write a word (high byte, then low byte) to one of the registers
- * determined by its sub-address.
- */
-
-Bool
-xf86I2CWriteWord(I2CDevPtr d, I2CByte subaddr, unsigned short word)
-{
- I2CByte wb[3];
-
- wb[0] = subaddr;
- wb[1] = word >> 8;
- wb[2] = word & 0xFF;
-
- return xf86I2CWriteRead(d, wb, 3, NULL, 0);
-}
-
-/* Write a vector of bytes to not adjacent registers. This vector is,
- * 1st byte sub-address, 2nd byte value, 3rd byte sub-address asf.
- * This function is intended to initialize devices. Note this function
- * exits immediately when an error occurs, some registers may
- * remain uninitialized.
- */
-
-Bool
-xf86I2CWriteVec(I2CDevPtr d, I2CByte *vec, int nValues)
-{
- I2CBusPtr b = d->pI2CBus;
- Bool r = TRUE;
- int s = 0;
-
- if (nValues > 0) {
- for (; nValues > 0; nValues--, vec += 2) {
- if (!(r = b->I2CAddress(d, d->SlaveAddr & ~1)))
- break;
-
- s++;
-
- if (!(r = b->I2CPutByte(d, vec[0])))
- break;
-
- if (!(r = b->I2CPutByte(d, vec[1])))
- break;
- }
-
- if (s > 0) b->I2CStop(d);
- }
-
- return r;
-}
-
-/* Administrative functions.
- * =========================
- */
-
-/* Allocates an I2CDevRec for you and initializes with propper defaults
- * you may modify before calling xf86I2CDevInit. Your I2CDevRec must
- * contain at least a SlaveAddr, and a pI2CBus pointer to the bus this
- * device shall be linked to.
- *
- * See function I2CAddress for the slave address format. Always set
- * the least significant bit, indicating a read or write access, to zero.
- */
-
-I2CDevPtr
-xf86CreateI2CDevRec(void)
-{
- return calloc(1, sizeof(I2CDevRec));
-}
-
-/* Unlink an I2C device. If you got the I2CDevRec from xf86CreateI2CDevRec
- * you should set <unalloc> to free it.
- */
-
-void
-xf86DestroyI2CDevRec(I2CDevPtr d, Bool unalloc)
-{
- if (d) {
- I2CDevPtr *p;
-
- /* Remove this from the list of active I2C devices. */
-
- for (p = &d->pI2CBus->FirstDev; *p != NULL; p = &(*p)->NextDev)
- if (*p == d) {
- *p = (*p)->NextDev;
- break;
- }
-
- xf86DrvMsg(d->pI2CBus->scrnIndex, X_INFO,
- "I2C device \"%s:%s\" removed.\n",
- d->pI2CBus->BusName, d->DevName);
-
- if (unalloc) free(d);
- }
-}
-
-/* I2C transmissions are related to an I2CDevRec you must link to a
- * previously registered bus (see xf86I2CBusInit) before attempting
- * to read and write data. You may call xf86I2CProbeAddress first to
- * see if the device in question is present on this bus.
- *
- * xf86I2CDevInit will not allocate an I2CBusRec for you, instead you
- * may enter a pointer to a statically allocated I2CDevRec or the (modified)
- * result of xf86CreateI2CDevRec.
- *
- * If you don't specify timeouts for the device (n <= 0), it will inherit
- * the bus-wide defaults. The function returns TRUE on success.
- */
-
-Bool
-xf86I2CDevInit(I2CDevPtr d)
-{
- I2CBusPtr b;
-
- if (d == NULL ||
- (b = d->pI2CBus) == NULL ||
- (d->SlaveAddr & 1) ||
- xf86I2CFindDev(b, d->SlaveAddr) != NULL)
- return FALSE;
-
- if (d->BitTimeout <= 0) d->BitTimeout = b->BitTimeout;
- if (d->ByteTimeout <= 0) d->ByteTimeout = b->ByteTimeout;
- if (d->AcknTimeout <= 0) d->AcknTimeout = b->AcknTimeout;
- if (d->StartTimeout <= 0) d->StartTimeout = b->StartTimeout;
-
- d->NextDev = b->FirstDev;
- b->FirstDev = d;
-
- xf86DrvMsg(b->scrnIndex, X_INFO,
- "I2C device \"%s:%s\" registered at address 0x%02X.\n",
- b->BusName, d->DevName, d->SlaveAddr);
-
- return TRUE;
-}
-
-I2CDevPtr
-xf86I2CFindDev(I2CBusPtr b, I2CSlaveAddr addr)
-{
- I2CDevPtr d;
-
- if (b) {
- for (d = b->FirstDev; d != NULL; d = d->NextDev)
- if (d->SlaveAddr == addr)
- return d;
- }
-
- return NULL;
-}
-
-static I2CBusPtr I2CBusList;
-
-/* Allocates an I2CBusRec for you and initializes with propper defaults
- * you may modify before calling xf86I2CBusInit. Your I2CBusRec must
- * contain at least a BusName, a scrnIndex (or -1), and a complete set
- * of either high or low level I2C function pointers. You may pass
- * bus-wide timeouts, otherwise inplausible values will be replaced
- * with safe defaults.
- */
-
-I2CBusPtr
-xf86CreateI2CBusRec(void)
-{
- I2CBusPtr b;
-
- b = (I2CBusPtr) calloc(1, sizeof(I2CBusRec));
-
- if (b != NULL) {
- b->scrnIndex = -1;
- b->HoldTime = 5; /* 100 kHz bus */
- b->BitTimeout = 5;
- b->ByteTimeout = 5;
- b->AcknTimeout = 5;
- b->StartTimeout = 5;
- b->RiseFallTime = RISEFALLTIME;
- }
-
- return b;
-}
-
-/* Unregister an I2C bus. If you got the I2CBusRec from xf86CreateI2CBusRec
- * you should set <unalloc> to free it. If you set <devs_too>, the function
- * xf86DestroyI2CDevRec will be called for all devices linked to the bus
- * first, passing down the <unalloc> option.
- */
-
-void
-xf86DestroyI2CBusRec(I2CBusPtr b, Bool unalloc, Bool devs_too)
-{
- if (b) {
- I2CBusPtr *p;
-
- /* Remove this from the list of active I2C buses */
-
- for (p = &I2CBusList; *p != NULL; p = &(*p)->NextBus)
- if (*p == b) {
- *p = (*p)->NextBus;
- break;
- }
-
- if (b->FirstDev != NULL) {
- if (devs_too) {
- I2CDevPtr d;
-
- while ((d = b->FirstDev) != NULL) {
- b->FirstDev = d->NextDev;
- xf86DestroyI2CDevRec(d, unalloc);
- }
- } else {
- if (unalloc) {
- xf86Msg(X_ERROR, "i2c bug: Attempt to remove I2C bus \"%s\", "
- "but device list is not empty.\n",
- b->BusName);
- return;
- }
- }
- }
-
- xf86DrvMsg(b->scrnIndex, X_INFO, "I2C bus \"%s\" removed.\n",
- b->BusName);
-
- if (unalloc) free(b);
- }
-}
-
-/* I2C masters have to register themselves using this function.
- * It will not allocate an I2CBusRec for you, instead you may enter
- * a pointer to a statically allocated I2CBusRec or the (modified)
- * result of xf86CreateI2CBusRec. Returns TRUE on success.
- *
- * At this point there won't be any traffic on the I2C bus.
- */
-
-Bool
-xf86I2CBusInit(I2CBusPtr b)
-{
- /* I2C buses must be identified by a unique scrnIndex
- * and name. If scrnIndex is unspecified (a negative value),
- * then the name must be unique throughout the server.
- */
-
- if (b->BusName == NULL ||
- xf86I2CFindBus(b->scrnIndex, b->BusName) != NULL)
- return FALSE;
-
- /* If the high level functions are not
- * supplied, use the generic functions.
- * In this case we need the low-level
- * function.
- */
- if (b->I2CWriteRead == NULL)
- {
- b->I2CWriteRead=I2CWriteRead;
-
- if (b->I2CPutBits == NULL ||
- b->I2CGetBits == NULL)
- {
- if (b->I2CPutByte == NULL ||
- b->I2CGetByte == NULL ||
- b->I2CAddress == NULL ||
- b->I2CStart == NULL ||
- b->I2CStop == NULL)
- return FALSE;
- } else {
- b->I2CPutByte = I2CPutByte;
- b->I2CGetByte = I2CGetByte;
- b->I2CAddress = I2CAddress;
- b->I2CStop = I2CStop;
- b->I2CStart = I2CStart;
- }
- }
-
- if (b->I2CUDelay == NULL)
- b->I2CUDelay = I2CUDelay;
-
- if (b->HoldTime < 2) b->HoldTime = 5;
- if (b->BitTimeout <= 0) b->BitTimeout = b->HoldTime;
- if (b->ByteTimeout <= 0) b->ByteTimeout = b->HoldTime;
- if (b->AcknTimeout <= 0) b->AcknTimeout = b->HoldTime;
- if (b->StartTimeout <= 0) b->StartTimeout = b->HoldTime;
-
- /* Put new bus on list. */
-
- b->NextBus = I2CBusList;
- I2CBusList = b;
-
- xf86DrvMsg(b->scrnIndex, X_INFO, "I2C bus \"%s\" initialized.\n",
- b->BusName);
-
- return TRUE;
-}
-
-I2CBusPtr
-xf86I2CFindBus(int scrnIndex, char *name)
-{
- I2CBusPtr p;
-
- if (name != NULL)
- for (p = I2CBusList; p != NULL; p = p->NextBus)
- if (scrnIndex < 0 || p->scrnIndex == scrnIndex)
- if (!strcmp(p->BusName, name))
- return p;
-
- return NULL;
-}
-
-/*
- * Return an array of I2CBusPtr's related to a screen. The caller is
- * responsible for freeing the array.
- */
-int
-xf86I2CGetScreenBuses(int scrnIndex, I2CBusPtr **pppI2CBus)
-{
- I2CBusPtr pI2CBus;
- int n = 0;
-
- if (pppI2CBus)
- *pppI2CBus = NULL;
-
- for (pI2CBus = I2CBusList; pI2CBus; pI2CBus = pI2CBus->NextBus) {
- if ((pI2CBus->scrnIndex >= 0) && (pI2CBus->scrnIndex != scrnIndex))
- continue;
-
- n++;
-
- if (!pppI2CBus)
- continue;
-
- *pppI2CBus = xnfrealloc(*pppI2CBus, n * sizeof(I2CBusPtr));
- (*pppI2CBus)[n - 1] = pI2CBus;
- }
-
- return n;
-}
+/*
+ * Copyright (C) 1998 Itai Nahshon, Michael Schimek
+ *
+ * The original code was derived from and inspired by
+ * the I2C driver from the Linux kernel.
+ * (c) 1998 Gerd Knorr <kraxel@cs.tu-berlin.de>
+ */
+
+#ifdef HAVE_XORG_CONFIG_H
+#include <xorg-config.h>
+#endif
+
+#include <sys/time.h>
+#include <string.h>
+
+#include "misc.h"
+#include "xf86.h"
+#include "xf86_OSproc.h"
+
+#include <X11/X.h>
+#include <X11/Xos.h>
+#include <X11/Xproto.h>
+#include "scrnintstr.h"
+#include "regionstr.h"
+#include "windowstr.h"
+#include "pixmapstr.h"
+#include "validate.h"
+#include "resource.h"
+#include "gcstruct.h"
+#include "dixstruct.h"
+
+#include "xf86i2c.h"
+
+#define I2C_TIMEOUT(x) /*(x)*/ /* Report timeouts */
+#define I2C_TRACE(x) /*(x)*/ /* Report progress */
+
+/* This is the default I2CUDelay function if not supplied by the driver.
+ * High level I2C interfaces implementing the bus protocol in hardware
+ * should supply this function too.
+ *
+ * Delay execution at least usec microseconds.
+ * All values 0 to 1e6 inclusive must be expected.
+ */
+
+static void
+I2CUDelay(I2CBusPtr b, int usec)
+{
+ struct timeval begin, cur;
+ long d_secs, d_usecs;
+ long diff;
+
+ if (usec > 0) {
+ X_GETTIMEOFDAY(&begin);
+ do {
+ /* It would be nice to use {xf86}usleep,
+ * but usleep (1) takes >10000 usec !
+ */
+ X_GETTIMEOFDAY(&cur);
+ d_secs = (cur.tv_sec - begin.tv_sec);
+ d_usecs = (cur.tv_usec - begin.tv_usec);
+ diff = d_secs * 1000000 + d_usecs;
+ } while (diff >= 0 && diff < (usec + 1));
+ }
+}
+
+/* Most drivers will register just with GetBits/PutBits functions.
+ * The following functions implement a software I2C protocol
+ * by using the promitive functions given by the driver.
+ * ================================================================
+ *
+ * It is assumed that there is just one master on the I2C bus, therefore
+ * there is no explicit test for conflits.
+ */
+
+#define RISEFALLTIME 2 /* usec, actually 300 to 1000 ns according to the i2c specs */
+
+/* Some devices will hold SCL low to slow down the bus or until
+ * ready for transmission.
+ *
+ * This condition will be noticed when the master tries to raise
+ * the SCL line. You can set the timeout to zero if the slave device
+ * does not support this clock synchronization.
+ */
+
+static Bool
+I2CRaiseSCL(I2CBusPtr b, int sda, int timeout)
+{
+ int i, scl;
+
+ b->I2CPutBits(b, 1, sda);
+ b->I2CUDelay(b, b->RiseFallTime);
+
+ for (i = timeout; i > 0; i -= b->RiseFallTime) {
+ b->I2CGetBits(b, &scl, &sda);
+ if (scl)
+ break;
+ b->I2CUDelay(b, b->RiseFallTime);
+ }
+
+ if (i <= 0) {
+ I2C_TIMEOUT(ErrorF
+ ("[I2CRaiseSCL(<%s>, %d, %d) timeout]", b->BusName, sda,
+ timeout));
+ return FALSE;
+ }
+
+ return TRUE;
+}
+
+/* Send a start signal on the I2C bus. The start signal notifies
+ * devices that a new transaction is initiated by the bus master.
+ *
+ * The start signal is always followed by a slave address.
+ * Slave addresses are 8+ bits. The first 7 bits identify the
+ * device and the last bit signals if this is a read (1) or
+ * write (0) operation.
+ *
+ * There may be more than one start signal on one transaction.
+ * This happens for example on some devices that allow reading
+ * of registers. First send a start bit followed by the device
+ * address (with the last bit 0) and the register number. Then send
+ * a new start bit with the device address (with the last bit 1)
+ * and then read the value from the device.
+ *
+ * Note this is function does not implement a multiple master
+ * arbitration procedure.
+ */
+
+static Bool
+I2CStart(I2CBusPtr b, int timeout)
+{
+ if (!I2CRaiseSCL(b, 1, timeout))
+ return FALSE;
+
+ b->I2CPutBits(b, 1, 0);
+ b->I2CUDelay(b, b->HoldTime);
+ b->I2CPutBits(b, 0, 0);
+ b->I2CUDelay(b, b->HoldTime);
+
+ I2C_TRACE(ErrorF("\ni2c: <"));
+
+ return TRUE;
+}
+
+/* This is the default I2CStop function if not supplied by the driver.
+ *
+ * Signal devices on the I2C bus that a transaction on the
+ * bus has finished. There may be more than one start signal
+ * on a transaction but only one stop signal.
+ */
+
+static void
+I2CStop(I2CDevPtr d)
+{
+ I2CBusPtr b = d->pI2CBus;
+
+ b->I2CPutBits(b, 0, 0);
+ b->I2CUDelay(b, b->RiseFallTime);
+
+ b->I2CPutBits(b, 1, 0);
+ b->I2CUDelay(b, b->HoldTime);
+ b->I2CPutBits(b, 1, 1);
+ b->I2CUDelay(b, b->HoldTime);
+
+ I2C_TRACE(ErrorF(">\n"));
+}
+
+/* Write/Read a single bit to/from a device.
+ * Return FALSE if a timeout occurs.
+ */
+
+static Bool
+I2CWriteBit(I2CBusPtr b, int sda, int timeout)
+{
+ Bool r;
+
+ b->I2CPutBits(b, 0, sda);
+ b->I2CUDelay(b, b->RiseFallTime);
+
+ r = I2CRaiseSCL(b, sda, timeout);
+ b->I2CUDelay(b, b->HoldTime);
+
+ b->I2CPutBits(b, 0, sda);
+ b->I2CUDelay(b, b->HoldTime);
+
+ return r;
+}
+
+static Bool
+I2CReadBit(I2CBusPtr b, int *psda, int timeout)
+{
+ Bool r;
+ int scl;
+
+ r = I2CRaiseSCL(b, 1, timeout);
+ b->I2CUDelay(b, b->HoldTime);
+
+ b->I2CGetBits(b, &scl, psda);
+
+ b->I2CPutBits(b, 0, 1);
+ b->I2CUDelay(b, b->HoldTime);
+
+ return r;
+}
+
+/* This is the default I2CPutByte function if not supplied by the driver.
+ *
+ * A single byte is sent to the device.
+ * The function returns FALSE if a timeout occurs, you should send
+ * a stop condition afterwards to reset the bus.
+ *
+ * A timeout occurs,
+ * if the slave pulls SCL to slow down the bus more than ByteTimeout usecs,
+ * or slows down the bus for more than BitTimeout usecs for each bit,
+ * or does not send an ACK bit (0) to acknowledge the transmission within
+ * AcknTimeout usecs, but a NACK (1) bit.
+ *
+ * AcknTimeout must be at least b->HoldTime, the other timeouts can be
+ * zero according to the comment on I2CRaiseSCL.
+ */
+
+static Bool
+I2CPutByte(I2CDevPtr d, I2CByte data)
+{
+ Bool r;
+ int i, scl, sda;
+ I2CBusPtr b = d->pI2CBus;
+
+ if (!I2CWriteBit(b, (data >> 7) & 1, d->ByteTimeout))
+ return FALSE;
+
+ for (i = 6; i >= 0; i--)
+ if (!I2CWriteBit(b, (data >> i) & 1, d->BitTimeout))
+ return FALSE;
+
+ b->I2CPutBits(b, 0, 1);
+ b->I2CUDelay(b, b->RiseFallTime);
+
+ r = I2CRaiseSCL(b, 1, b->HoldTime);
+
+ if (r) {
+ for (i = d->AcknTimeout; i > 0; i -= b->HoldTime) {
+ b->I2CUDelay(b, b->HoldTime);
+ b->I2CGetBits(b, &scl, &sda);
+ if (sda == 0)
+ break;
+ }
+
+ if (i <= 0) {
+ I2C_TIMEOUT(ErrorF("[I2CPutByte(<%s>, 0x%02x, %d, %d, %d) timeout]",
+ b->BusName, data, d->BitTimeout,
+ d->ByteTimeout, d->AcknTimeout));
+ r = FALSE;
+ }
+
+ I2C_TRACE(ErrorF("W%02x%c ", (int) data, sda ? '-' : '+'));
+ }
+
+ b->I2CPutBits(b, 0, 1);
+ b->I2CUDelay(b, b->HoldTime);
+
+ return r;
+}
+
+/* This is the default I2CGetByte function if not supplied by the driver.
+ *
+ * A single byte is read from the device.
+ * The function returns FALSE if a timeout occurs, you should send
+ * a stop condition afterwards to reset the bus.
+ *
+ * A timeout occurs,
+ * if the slave pulls SCL to slow down the bus more than ByteTimeout usecs,
+ * or slows down the bus for more than b->BitTimeout usecs for each bit.
+ *
+ * ByteTimeout must be at least b->HoldTime, the other timeouts can be
+ * zero according to the comment on I2CRaiseSCL.
+ *
+ * For the <last> byte in a sequence the acknowledge bit NACK (1),
+ * otherwise ACK (0) will be sent.
+ */
+
+static Bool
+I2CGetByte(I2CDevPtr d, I2CByte * data, Bool last)
+{
+ int i, sda;
+ I2CBusPtr b = d->pI2CBus;
+
+ b->I2CPutBits(b, 0, 1);
+ b->I2CUDelay(b, b->RiseFallTime);
+
+ if (!I2CReadBit(b, &sda, d->ByteTimeout))
+ return FALSE;
+
+ *data = (sda > 0) << 7;
+
+ for (i = 6; i >= 0; i--)
+ if (!I2CReadBit(b, &sda, d->BitTimeout))
+ return FALSE;
+ else
+ *data |= (sda > 0) << i;
+
+ if (!I2CWriteBit(b, last ? 1 : 0, d->BitTimeout))
+ return FALSE;
+
+ I2C_TRACE(ErrorF("R%02x%c ", (int) *data, last ? '+' : '-'));
+
+ return TRUE;
+}
+
+/* This is the default I2CAddress function if not supplied by the driver.
+ *
+ * It creates the start condition, followed by the d->SlaveAddr.
+ * Higher level functions must call this routine rather than
+ * I2CStart/PutByte because a hardware I2C master may not be able
+ * to send a slave address without a start condition.
+ *
+ * The same timeouts apply as with I2CPutByte and additional a
+ * StartTimeout, similar to the ByteTimeout but for the start
+ * condition.
+ *
+ * In case of a timeout, the bus is left in a clean idle condition.
+ * I. e. you *must not* send a Stop. If this function succeeds, you *must*.
+ *
+ * The slave address format is 16 bit, with the legacy _8_bit_ slave address
+ * in the least significant byte. This is, the slave address must include the
+ * R/_W flag as least significant bit.
+ *
+ * The most significant byte of the address will be sent _after_ the LSB,
+ * but only if the LSB indicates:
+ * a) an 11 bit address, this is LSB = 1111 0xxx.
+ * b) a 'general call address', this is LSB = 0000 000x - see the I2C specs
+ * for more.
+ */
+
+static Bool
+I2CAddress(I2CDevPtr d, I2CSlaveAddr addr)
+{
+ if (I2CStart(d->pI2CBus, d->StartTimeout)) {
+ if (I2CPutByte(d, addr & 0xFF)) {
+ if ((addr & 0xF8) != 0xF0 && (addr & 0xFE) != 0x00)
+ return TRUE;
+
+ if (I2CPutByte(d, (addr >> 8) & 0xFF))
+ return TRUE;
+ }
+
+ I2CStop(d);
+ }
+
+ return FALSE;
+}
+
+/* These are the hardware independent I2C helper functions.
+ * ========================================================
+ */
+
+/* Function for probing. Just send the slave address
+ * and return true if the device responds. The slave address
+ * must have the lsb set to reflect a read (1) or write (0) access.
+ * Don't expect a read- or write-only device will respond otherwise.
+ */
+
+Bool
+xf86I2CProbeAddress(I2CBusPtr b, I2CSlaveAddr addr)
+{
+ int r;
+ I2CDevRec d;
+
+ d.DevName = "Probing";
+ d.BitTimeout = b->BitTimeout;
+ d.ByteTimeout = b->ByteTimeout;
+ d.AcknTimeout = b->AcknTimeout;
+ d.StartTimeout = b->StartTimeout;
+ d.SlaveAddr = addr;
+ d.pI2CBus = b;
+ d.NextDev = NULL;
+
+ r = b->I2CAddress(&d, addr);
+
+ if (r)
+ b->I2CStop(&d);
+
+ return r;
+}
+
+/* All functions below are related to devices and take the
+ * slave address and timeout values from an I2CDevRec. They
+ * return FALSE in case of an error (presumably a timeout).
+ */
+
+/* General purpose read and write function.
+ *
+ * 1st, if nWrite > 0
+ * Send a start condition
+ * Send the slave address (1 or 2 bytes) with write flag
+ * Write n bytes from WriteBuffer
+ * 2nd, if nRead > 0
+ * Send a start condition [again]
+ * Send the slave address (1 or 2 bytes) with read flag
+ * Read n bytes to ReadBuffer
+ * 3rd, if a Start condition has been successfully sent,
+ * Send a Stop condition.
+ *
+ * The functions exits immediately when an error occures,
+ * not proceeding any data left. However, step 3 will
+ * be executed anyway to leave the bus in clean idle state.
+ */
+
+static Bool
+I2CWriteRead(I2CDevPtr d,
+ I2CByte * WriteBuffer, int nWrite, I2CByte * ReadBuffer, int nRead)
+{
+ Bool r = TRUE;
+ I2CBusPtr b = d->pI2CBus;
+ int s = 0;
+
+ if (r && nWrite > 0) {
+ r = b->I2CAddress(d, d->SlaveAddr & ~1);
+ if (r) {
+ for (; nWrite > 0; WriteBuffer++, nWrite--)
+ if (!(r = b->I2CPutByte(d, *WriteBuffer)))
+ break;
+ s++;
+ }
+ }
+
+ if (r && nRead > 0) {
+ r = b->I2CAddress(d, d->SlaveAddr | 1);
+ if (r) {
+ for (; nRead > 0; ReadBuffer++, nRead--)
+ if (!(r = b->I2CGetByte(d, ReadBuffer, nRead == 1)))
+ break;
+ s++;
+ }
+ }
+
+ if (s)
+ b->I2CStop(d);
+
+ return r;
+}
+
+/* wrapper - for compatibility and convinience */
+
+Bool
+xf86I2CWriteRead(I2CDevPtr d,
+ I2CByte * WriteBuffer, int nWrite,
+ I2CByte * ReadBuffer, int nRead)
+{
+ I2CBusPtr b = d->pI2CBus;
+
+ return b->I2CWriteRead(d, WriteBuffer, nWrite, ReadBuffer, nRead);
+}
+
+/* Read a byte, the only readable register of a device.
+ */
+
+Bool
+xf86I2CReadStatus(I2CDevPtr d, I2CByte * pbyte)
+{
+ return xf86I2CWriteRead(d, NULL, 0, pbyte, 1);
+}
+
+/* Read a byte from one of the registers determined by its sub-address.
+ */
+
+Bool
+xf86I2CReadByte(I2CDevPtr d, I2CByte subaddr, I2CByte * pbyte)
+{
+ return xf86I2CWriteRead(d, &subaddr, 1, pbyte, 1);
+}
+
+/* Read bytes from subsequent registers determined by the
+ * sub-address of the first register.
+ */
+
+Bool
+xf86I2CReadBytes(I2CDevPtr d, I2CByte subaddr, I2CByte * pbyte, int n)
+{
+ return xf86I2CWriteRead(d, &subaddr, 1, pbyte, n);
+}
+
+/* Read a word (high byte, then low byte) from one of the registers
+ * determined by its sub-address.
+ */
+
+Bool
+xf86I2CReadWord(I2CDevPtr d, I2CByte subaddr, unsigned short *pword)
+{
+ I2CByte rb[2];
+
+ if (!xf86I2CWriteRead(d, &subaddr, 1, rb, 2))
+ return FALSE;
+
+ *pword = (rb[0] << 8) | rb[1];
+
+ return TRUE;
+}
+
+/* Write a byte to one of the registers determined by its sub-address.
+ */
+
+Bool
+xf86I2CWriteByte(I2CDevPtr d, I2CByte subaddr, I2CByte byte)
+{
+ I2CByte wb[2];
+
+ wb[0] = subaddr;
+ wb[1] = byte;
+
+ return xf86I2CWriteRead(d, wb, 2, NULL, 0);
+}
+
+/* Write bytes to subsequent registers determined by the
+ * sub-address of the first register.
+ */
+
+Bool
+xf86I2CWriteBytes(I2CDevPtr d, I2CByte subaddr,
+ I2CByte * WriteBuffer, int nWrite)
+{
+ I2CBusPtr b = d->pI2CBus;
+ Bool r = TRUE;
+
+ if (nWrite > 0) {
+ r = b->I2CAddress(d, d->SlaveAddr & ~1);
+ if (r) {
+ if ((r = b->I2CPutByte(d, subaddr)))
+ for (; nWrite > 0; WriteBuffer++, nWrite--)
+ if (!(r = b->I2CPutByte(d, *WriteBuffer)))
+ break;
+
+ b->I2CStop(d);
+ }
+ }
+
+ return r;
+}
+
+/* Write a word (high byte, then low byte) to one of the registers
+ * determined by its sub-address.
+ */
+
+Bool
+xf86I2CWriteWord(I2CDevPtr d, I2CByte subaddr, unsigned short word)
+{
+ I2CByte wb[3];
+
+ wb[0] = subaddr;
+ wb[1] = word >> 8;
+ wb[2] = word & 0xFF;
+
+ return xf86I2CWriteRead(d, wb, 3, NULL, 0);
+}
+
+/* Write a vector of bytes to not adjacent registers. This vector is,
+ * 1st byte sub-address, 2nd byte value, 3rd byte sub-address asf.
+ * This function is intended to initialize devices. Note this function
+ * exits immediately when an error occurs, some registers may
+ * remain uninitialized.
+ */
+
+Bool
+xf86I2CWriteVec(I2CDevPtr d, I2CByte * vec, int nValues)
+{
+ I2CBusPtr b = d->pI2CBus;
+ Bool r = TRUE;
+ int s = 0;
+
+ if (nValues > 0) {
+ for (; nValues > 0; nValues--, vec += 2) {
+ if (!(r = b->I2CAddress(d, d->SlaveAddr & ~1)))
+ break;
+
+ s++;
+
+ if (!(r = b->I2CPutByte(d, vec[0])))
+ break;
+
+ if (!(r = b->I2CPutByte(d, vec[1])))
+ break;
+ }
+
+ if (s > 0)
+ b->I2CStop(d);
+ }
+
+ return r;
+}
+
+/* Administrative functions.
+ * =========================
+ */
+
+/* Allocates an I2CDevRec for you and initializes with propper defaults
+ * you may modify before calling xf86I2CDevInit. Your I2CDevRec must
+ * contain at least a SlaveAddr, and a pI2CBus pointer to the bus this
+ * device shall be linked to.
+ *
+ * See function I2CAddress for the slave address format. Always set
+ * the least significant bit, indicating a read or write access, to zero.
+ */
+
+I2CDevPtr
+xf86CreateI2CDevRec(void)
+{
+ return calloc(1, sizeof(I2CDevRec));
+}
+
+/* Unlink an I2C device. If you got the I2CDevRec from xf86CreateI2CDevRec
+ * you should set <unalloc> to free it.
+ */
+
+void
+xf86DestroyI2CDevRec(I2CDevPtr d, Bool unalloc)
+{
+ if (d) {
+ I2CDevPtr *p;
+
+ /* Remove this from the list of active I2C devices. */
+
+ for (p = &d->pI2CBus->FirstDev; *p != NULL; p = &(*p)->NextDev)
+ if (*p == d) {
+ *p = (*p)->NextDev;
+ break;
+ }
+
+ xf86DrvMsg(d->pI2CBus->scrnIndex, X_INFO,
+ "I2C device \"%s:%s\" removed.\n",
+ d->pI2CBus->BusName, d->DevName);
+
+ if (unalloc)
+ free(d);
+ }
+}
+
+/* I2C transmissions are related to an I2CDevRec you must link to a
+ * previously registered bus (see xf86I2CBusInit) before attempting
+ * to read and write data. You may call xf86I2CProbeAddress first to
+ * see if the device in question is present on this bus.
+ *
+ * xf86I2CDevInit will not allocate an I2CBusRec for you, instead you
+ * may enter a pointer to a statically allocated I2CDevRec or the (modified)
+ * result of xf86CreateI2CDevRec.
+ *
+ * If you don't specify timeouts for the device (n <= 0), it will inherit
+ * the bus-wide defaults. The function returns TRUE on success.
+ */
+
+Bool
+xf86I2CDevInit(I2CDevPtr d)
+{
+ I2CBusPtr b;
+
+ if (d == NULL ||
+ (b = d->pI2CBus) == NULL ||
+ (d->SlaveAddr & 1) || xf86I2CFindDev(b, d->SlaveAddr) != NULL)
+ return FALSE;
+
+ if (d->BitTimeout <= 0)
+ d->BitTimeout = b->BitTimeout;
+ if (d->ByteTimeout <= 0)
+ d->ByteTimeout = b->ByteTimeout;
+ if (d->AcknTimeout <= 0)
+ d->AcknTimeout = b->AcknTimeout;
+ if (d->StartTimeout <= 0)
+ d->StartTimeout = b->StartTimeout;
+
+ d->NextDev = b->FirstDev;
+ b->FirstDev = d;
+
+ xf86DrvMsg(b->scrnIndex, X_INFO,
+ "I2C device \"%s:%s\" registered at address 0x%02X.\n",
+ b->BusName, d->DevName, d->SlaveAddr);
+
+ return TRUE;
+}
+
+I2CDevPtr
+xf86I2CFindDev(I2CBusPtr b, I2CSlaveAddr addr)
+{
+ I2CDevPtr d;
+
+ if (b) {
+ for (d = b->FirstDev; d != NULL; d = d->NextDev)
+ if (d->SlaveAddr == addr)
+ return d;
+ }
+
+ return NULL;
+}
+
+static I2CBusPtr I2CBusList;
+
+/* Allocates an I2CBusRec for you and initializes with propper defaults
+ * you may modify before calling xf86I2CBusInit. Your I2CBusRec must
+ * contain at least a BusName, a scrnIndex (or -1), and a complete set
+ * of either high or low level I2C function pointers. You may pass
+ * bus-wide timeouts, otherwise inplausible values will be replaced
+ * with safe defaults.
+ */
+
+I2CBusPtr
+xf86CreateI2CBusRec(void)
+{
+ I2CBusPtr b;
+
+ b = (I2CBusPtr) calloc(1, sizeof(I2CBusRec));
+
+ if (b != NULL) {
+ b->scrnIndex = -1;
+ b->HoldTime = 5; /* 100 kHz bus */
+ b->BitTimeout = 5;
+ b->ByteTimeout = 5;
+ b->AcknTimeout = 5;
+ b->StartTimeout = 5;
+ b->RiseFallTime = RISEFALLTIME;
+ }
+
+ return b;
+}
+
+/* Unregister an I2C bus. If you got the I2CBusRec from xf86CreateI2CBusRec
+ * you should set <unalloc> to free it. If you set <devs_too>, the function
+ * xf86DestroyI2CDevRec will be called for all devices linked to the bus
+ * first, passing down the <unalloc> option.
+ */
+
+void
+xf86DestroyI2CBusRec(I2CBusPtr b, Bool unalloc, Bool devs_too)
+{
+ if (b) {
+ I2CBusPtr *p;
+
+ /* Remove this from the list of active I2C buses */
+
+ for (p = &I2CBusList; *p != NULL; p = &(*p)->NextBus)
+ if (*p == b) {
+ *p = (*p)->NextBus;
+ break;
+ }
+
+ if (b->FirstDev != NULL) {
+ if (devs_too) {
+ I2CDevPtr d;
+
+ while ((d = b->FirstDev) != NULL) {
+ b->FirstDev = d->NextDev;
+ xf86DestroyI2CDevRec(d, unalloc);
+ }
+ }
+ else {
+ if (unalloc) {
+ xf86Msg(X_ERROR,
+ "i2c bug: Attempt to remove I2C bus \"%s\", "
+ "but device list is not empty.\n", b->BusName);
+ return;
+ }
+ }
+ }
+
+ xf86DrvMsg(b->scrnIndex, X_INFO, "I2C bus \"%s\" removed.\n",
+ b->BusName);
+
+ if (unalloc)
+ free(b);
+ }
+}
+
+/* I2C masters have to register themselves using this function.
+ * It will not allocate an I2CBusRec for you, instead you may enter
+ * a pointer to a statically allocated I2CBusRec or the (modified)
+ * result of xf86CreateI2CBusRec. Returns TRUE on success.
+ *
+ * At this point there won't be any traffic on the I2C bus.
+ */
+
+Bool
+xf86I2CBusInit(I2CBusPtr b)
+{
+ /* I2C buses must be identified by a unique scrnIndex
+ * and name. If scrnIndex is unspecified (a negative value),
+ * then the name must be unique throughout the server.
+ */
+
+ if (b->BusName == NULL || xf86I2CFindBus(b->scrnIndex, b->BusName) != NULL)
+ return FALSE;
+
+ /* If the high level functions are not
+ * supplied, use the generic functions.
+ * In this case we need the low-level
+ * function.
+ */
+ if (b->I2CWriteRead == NULL) {
+ b->I2CWriteRead = I2CWriteRead;
+
+ if (b->I2CPutBits == NULL || b->I2CGetBits == NULL) {
+ if (b->I2CPutByte == NULL ||
+ b->I2CGetByte == NULL ||
+ b->I2CAddress == NULL ||
+ b->I2CStart == NULL || b->I2CStop == NULL)
+ return FALSE;
+ }
+ else {
+ b->I2CPutByte = I2CPutByte;
+ b->I2CGetByte = I2CGetByte;
+ b->I2CAddress = I2CAddress;
+ b->I2CStop = I2CStop;
+ b->I2CStart = I2CStart;
+ }
+ }
+
+ if (b->I2CUDelay == NULL)
+ b->I2CUDelay = I2CUDelay;
+
+ if (b->HoldTime < 2)
+ b->HoldTime = 5;
+ if (b->BitTimeout <= 0)
+ b->BitTimeout = b->HoldTime;
+ if (b->ByteTimeout <= 0)
+ b->ByteTimeout = b->HoldTime;
+ if (b->AcknTimeout <= 0)
+ b->AcknTimeout = b->HoldTime;
+ if (b->StartTimeout <= 0)
+ b->StartTimeout = b->HoldTime;
+
+ /* Put new bus on list. */
+
+ b->NextBus = I2CBusList;
+ I2CBusList = b;
+
+ xf86DrvMsg(b->scrnIndex, X_INFO, "I2C bus \"%s\" initialized.\n",
+ b->BusName);
+
+ return TRUE;
+}
+
+I2CBusPtr
+xf86I2CFindBus(int scrnIndex, char *name)
+{
+ I2CBusPtr p;
+
+ if (name != NULL)
+ for (p = I2CBusList; p != NULL; p = p->NextBus)
+ if (scrnIndex < 0 || p->scrnIndex == scrnIndex)
+ if (!strcmp(p->BusName, name))
+ return p;
+
+ return NULL;
+}
+
+/*
+ * Return an array of I2CBusPtr's related to a screen. The caller is
+ * responsible for freeing the array.
+ */
+int
+xf86I2CGetScreenBuses(int scrnIndex, I2CBusPtr ** pppI2CBus)
+{
+ I2CBusPtr pI2CBus;
+ int n = 0;
+
+ if (pppI2CBus)
+ *pppI2CBus = NULL;
+
+ for (pI2CBus = I2CBusList; pI2CBus; pI2CBus = pI2CBus->NextBus) {
+ if ((pI2CBus->scrnIndex >= 0) && (pI2CBus->scrnIndex != scrnIndex))
+ continue;
+
+ n++;
+
+ if (!pppI2CBus)
+ continue;
+
+ *pppI2CBus = xnfrealloc(*pppI2CBus, n * sizeof(I2CBusPtr));
+ (*pppI2CBus)[n - 1] = pI2CBus;
+ }
+
+ return n;
+}
diff --git a/xorg-server/hw/xfree86/i2c/xf86i2c.h b/xorg-server/hw/xfree86/i2c/xf86i2c.h
index f2ded09db..9a8fb21a3 100644
--- a/xorg-server/hw/xfree86/i2c/xf86i2c.h
+++ b/xorg-server/hw/xfree86/i2c/xf86i2c.h
@@ -2,13 +2,12 @@
* Copyright (C) 1998 Itai Nahshon, Michael Schimek
*/
-
#ifndef _XF86I2C_H
#define _XF86I2C_H
#include "regionstr.h"
-typedef unsigned char I2CByte;
+typedef unsigned char I2CByte;
typedef unsigned short I2CSlaveAddr;
typedef struct _I2CBusRec *I2CBusPtr;
@@ -17,68 +16,71 @@ typedef struct _I2CDevRec *I2CDevPtr;
/* I2C masters have to register themselves */
typedef struct _I2CBusRec {
- char * BusName;
- int scrnIndex;
-
- void (*I2CUDelay) (I2CBusPtr b, int usec);
-
- void (*I2CPutBits)(I2CBusPtr b, int scl, int sda);
- void (*I2CGetBits)(I2CBusPtr b, int *scl, int *sda);
+ char *BusName;
+ int scrnIndex;
+
+ void (*I2CUDelay) (I2CBusPtr b, int usec);
+
+ void (*I2CPutBits) (I2CBusPtr b, int scl, int sda);
+ void (*I2CGetBits) (I2CBusPtr b, int *scl, int *sda);
/* Look at the generic routines to see how these functions should behave. */
- Bool (*I2CStart) (I2CBusPtr b, int timeout);
- Bool (*I2CAddress)(I2CDevPtr d, I2CSlaveAddr);
- void (*I2CStop) (I2CDevPtr d);
- Bool (*I2CPutByte)(I2CDevPtr d, I2CByte data);
- Bool (*I2CGetByte)(I2CDevPtr d, I2CByte *data, Bool);
+ Bool (*I2CStart) (I2CBusPtr b, int timeout);
+ Bool (*I2CAddress) (I2CDevPtr d, I2CSlaveAddr);
+ void (*I2CStop) (I2CDevPtr d);
+ Bool (*I2CPutByte) (I2CDevPtr d, I2CByte data);
+ Bool (*I2CGetByte) (I2CDevPtr d, I2CByte * data, Bool);
- DevUnion DriverPrivate;
+ DevUnion DriverPrivate;
- int HoldTime; /* 1 / bus clock frequency, 5 or 2 usec */
+ int HoldTime; /* 1 / bus clock frequency, 5 or 2 usec */
- int BitTimeout; /* usec */
- int ByteTimeout; /* usec */
- int AcknTimeout; /* usec */
- int StartTimeout; /* usec */
- int RiseFallTime; /* usec */
+ int BitTimeout; /* usec */
+ int ByteTimeout; /* usec */
+ int AcknTimeout; /* usec */
+ int StartTimeout; /* usec */
+ int RiseFallTime; /* usec */
- I2CDevPtr FirstDev;
- I2CBusPtr NextBus;
- Bool (*I2CWriteRead)(I2CDevPtr d, I2CByte *WriteBuffer, int nWrite,
- I2CByte *ReadBuffer, int nRead);
+ I2CDevPtr FirstDev;
+ I2CBusPtr NextBus;
+ Bool (*I2CWriteRead) (I2CDevPtr d, I2CByte * WriteBuffer, int nWrite,
+ I2CByte * ReadBuffer, int nRead);
} I2CBusRec;
#define CreateI2CBusRec xf86CreateI2CBusRec
extern _X_EXPORT I2CBusPtr xf86CreateI2CBusRec(void);
+
#define DestroyI2CBusRec xf86DestroyI2CBusRec
-extern _X_EXPORT void xf86DestroyI2CBusRec(I2CBusPtr pI2CBus, Bool unalloc, Bool devs_too);
+extern _X_EXPORT void xf86DestroyI2CBusRec(I2CBusPtr pI2CBus, Bool unalloc,
+ Bool devs_too);
#define I2CBusInit xf86I2CBusInit
extern _X_EXPORT Bool xf86I2CBusInit(I2CBusPtr pI2CBus);
extern _X_EXPORT I2CBusPtr xf86I2CFindBus(int scrnIndex, char *name);
-extern _X_EXPORT int xf86I2CGetScreenBuses(int scrnIndex, I2CBusPtr **pppI2CBus);
-
+extern _X_EXPORT int xf86I2CGetScreenBuses(int scrnIndex,
+ I2CBusPtr ** pppI2CBus);
/* I2C slave devices */
typedef struct _I2CDevRec {
- char * DevName;
+ char *DevName;
- int BitTimeout; /* usec */
- int ByteTimeout; /* usec */
- int AcknTimeout; /* usec */
- int StartTimeout; /* usec */
+ int BitTimeout; /* usec */
+ int ByteTimeout; /* usec */
+ int AcknTimeout; /* usec */
+ int StartTimeout; /* usec */
- I2CSlaveAddr SlaveAddr;
- I2CBusPtr pI2CBus;
- I2CDevPtr NextDev;
- DevUnion DriverPrivate;
+ I2CSlaveAddr SlaveAddr;
+ I2CBusPtr pI2CBus;
+ I2CDevPtr NextDev;
+ DevUnion DriverPrivate;
} I2CDevRec;
#define CreateI2CDevRec xf86CreateI2CDevRec
extern _X_EXPORT I2CDevPtr xf86CreateI2CDevRec(void);
extern _X_EXPORT void xf86DestroyI2CDevRec(I2CDevPtr pI2CDev, Bool unalloc);
+
#define I2CDevInit xf86I2CDevInit
extern _X_EXPORT Bool xf86I2CDevInit(I2CDevPtr pI2CDev);
extern _X_EXPORT I2CDevPtr xf86I2CFindDev(I2CBusPtr, I2CSlaveAddr);
@@ -89,18 +91,25 @@ extern _X_EXPORT I2CDevPtr xf86I2CFindDev(I2CBusPtr, I2CSlaveAddr);
extern _X_EXPORT Bool xf86I2CProbeAddress(I2CBusPtr pI2CBus, I2CSlaveAddr);
#define I2C_WriteRead xf86I2CWriteRead
-extern _X_EXPORT Bool xf86I2CWriteRead(I2CDevPtr d, I2CByte *WriteBuffer, int nWrite,
- I2CByte *ReadBuffer, int nRead);
+extern _X_EXPORT Bool xf86I2CWriteRead(I2CDevPtr d, I2CByte * WriteBuffer,
+ int nWrite, I2CByte * ReadBuffer,
+ int nRead);
#define xf86I2CRead(d, rb, nr) xf86I2CWriteRead(d, NULL, 0, rb, nr)
-extern _X_EXPORT Bool xf86I2CReadStatus(I2CDevPtr d, I2CByte *pbyte);
-extern _X_EXPORT Bool xf86I2CReadByte(I2CDevPtr d, I2CByte subaddr, I2CByte *pbyte);
-extern _X_EXPORT Bool xf86I2CReadBytes(I2CDevPtr d, I2CByte subaddr, I2CByte *pbyte, int n);
-extern _X_EXPORT Bool xf86I2CReadWord(I2CDevPtr d, I2CByte subaddr, unsigned short *pword);
+extern _X_EXPORT Bool xf86I2CReadStatus(I2CDevPtr d, I2CByte * pbyte);
+extern _X_EXPORT Bool xf86I2CReadByte(I2CDevPtr d, I2CByte subaddr,
+ I2CByte * pbyte);
+extern _X_EXPORT Bool xf86I2CReadBytes(I2CDevPtr d, I2CByte subaddr,
+ I2CByte * pbyte, int n);
+extern _X_EXPORT Bool xf86I2CReadWord(I2CDevPtr d, I2CByte subaddr,
+ unsigned short *pword);
#define xf86I2CWrite(d, wb, nw) xf86I2CWriteRead(d, wb, nw, NULL, 0)
-extern _X_EXPORT Bool xf86I2CWriteByte(I2CDevPtr d, I2CByte subaddr, I2CByte byte);
-extern _X_EXPORT Bool xf86I2CWriteBytes(I2CDevPtr d, I2CByte subaddr, I2CByte *WriteBuffer, int nWrite);
-extern _X_EXPORT Bool xf86I2CWriteWord(I2CDevPtr d, I2CByte subaddr, unsigned short word);
-extern _X_EXPORT Bool xf86I2CWriteVec(I2CDevPtr d, I2CByte *vec, int nValues);
+extern _X_EXPORT Bool xf86I2CWriteByte(I2CDevPtr d, I2CByte subaddr,
+ I2CByte byte);
+extern _X_EXPORT Bool xf86I2CWriteBytes(I2CDevPtr d, I2CByte subaddr,
+ I2CByte * WriteBuffer, int nWrite);
+extern _X_EXPORT Bool xf86I2CWriteWord(I2CDevPtr d, I2CByte subaddr,
+ unsigned short word);
+extern _X_EXPORT Bool xf86I2CWriteVec(I2CDevPtr d, I2CByte * vec, int nValues);
#endif /*_XF86I2C_H */