aboutsummaryrefslogtreecommitdiff
path: root/xorg-server/hw/xfree86/int10
diff options
context:
space:
mode:
Diffstat (limited to 'xorg-server/hw/xfree86/int10')
-rw-r--r--xorg-server/hw/xfree86/int10/INT10.HOWTO688
-rw-r--r--xorg-server/hw/xfree86/int10/Makefile.am92
-rw-r--r--xorg-server/hw/xfree86/int10/x86emu.c24
-rw-r--r--xorg-server/hw/xfree86/int10/xf86x86emu.h108
4 files changed, 456 insertions, 456 deletions
diff --git a/xorg-server/hw/xfree86/int10/INT10.HOWTO b/xorg-server/hw/xfree86/int10/INT10.HOWTO
index f2f08ceec..e2154c1c3 100644
--- a/xorg-server/hw/xfree86/int10/INT10.HOWTO
+++ b/xorg-server/hw/xfree86/int10/INT10.HOWTO
@@ -1,344 +1,344 @@
-
- INT10 X86 Real Mode executor
- =============================
-
- PRELIMINARY
-
-INT10 is a XFree86 module for soft-booting and executing real mode
-int10 BIOS calls. The BIOS call code is largely untested, yet.
-
-1. Usage
-========
-
-To use the int10 module in a driver the header file
-xfree86/os-support/int10/xf86int10.h must be included.
-
- a. Initialization
- -----------------
-
-The int10-executer gets initialized by calling:
-
- xf86Int10InfoPtr xf86InitInt10(int entityIndex);
-
-The function will soft-boot any non-primary device and return a
-pointer to a xf86Int10InfoRec on success. If anything fails or if
-int10 execution is disabled by an option in the device section NULL
-will be returned. The driver should store this pointer for later
-calls to other int10 module functions.
-
- b. Memory allocation
- --------------------
-
-To allocate memory in the real mode execution environment
-
- void * xf86Int10AllocPages(xf86Int10InfoPtr pInt,int num, int *off);
-
-can be called. It allocates num consecutive pagesize chunks. It
-returns the address of the allocated area. off is set to its offset in
-the real mode memory space.
-
- void xf86Int10FreePages(xf86Int10InfoPtr pInt, void *pbase, int num);
-
-Is used to free num pages beginning at pbase.
-
- c. Doing int10 BIOS calls
- -------------------------
-
-The BIOS call is executed by calling:
-
- void xf86ExecX86int10(xf86Int10InfoPtr pInt);
-
-The number of the interrupt (normally 10) and the initial values of
-the ax, bx, cx, dx, si, di and es x86-CPU registers can be set in the
-xf86Int10InfoRec passed to the function. On return this structure
-contains the exit values of the registers listed above and the CPU
-flag register.
-
- d. De-initializing
- -----------------
-
-If no further int10 calls are required for a certain chipset
-the driver should call:
-
- void xf86FreeInt10(xf86Int10InfoPtr pInt);
-
-to free the memory allocated for real mode int10 calls.
-
-
-2. Porting issues
-=================
-
-The int10 real mode executor is designed to run on top of various x86
-CPU emulators as well as in vm86 mode of a real x86 CPU. If used with
-a CPU emulator the emulator and CPU specific interfaces can be held
-separate thus requiring minimal efforts to port the int10 module to
-new platforms. Currently an interface to the x86emu real mode
-emulator is provided. Since details of setting up and running the
-vm86 mode is platform dependent both the platform dependent
-environment and the emulation layer have to be ported. Several helper
-functions are provided for that.
-
-A CPU emulator should meet certain requirements to be usable
-for the INT10 executor:
-
-1. It must trap calls to intXX instructions and pass execution to an
- external function which is allowed to modify CPU registers
- including the instruction pointer (IP) before returning to the
- emulator for continuing execution. When the external function is
- called the IP must point to the instruction past the intXX call.
-
-2. The emulator should use externally provided functions to handle
- PIO.
-
-3. The emulator should be able to use externally provided functions
- to access memory from the real mode memory environment. Note, that
- the vm86 mode usually requires one hunk of consecutive memory
- starting at address 0 in the process virtual memory space. Thus if
- this mode is to be used, the OS environment has to be able to provide
- that, ie. it must be able to remap the processes virtual memory space
- onto itself. If the emulator is able to handle memory access thru
- externally provided functions the real mode process memory can be
- located anywhere in the processes virtual memory. It does not even
- have to be consecutive.
-
-4. The executor should terminate on encountering a 'hlt' instruction.
-
-
-Functions to implement:
-
-To simplify development the code has been split into a general setup
-part and an emulator specific one. A generic setup code is provided in
-generic.c. It should be usable with any emulator satisfying the
-conditions mentioned above. Therefore the following section on int10
-setup may be skipped when porting int10 to new emulator.
-
-If the vm86() is to be used no memory access functions can be used.
-Therefore the layout of the real mode memory image has to meet certain
-requirements. Therefore when porting to other platforms a new setup
-code may have to be designed, too. The following section will give
-guidelines how this may be done. A sample implementation using SysV
-IPC to map the appropriate real mode memory image to address 0 in
-virtual address space just prior to execution may be found in
-xfree86/os-support/linux/int10/linux.c.
-
-On non-PC like platforms emulation of certain PC features such as
-initialization of BIOS int vectors, sys_BIOS constants or PCI config
-method 1 can be turned on by defining _PC.
-
-I. Setup Code
--------------
-
-This sets up the real mode memory image, calls the emulator to POST
-the chipset if required and maintains memory allocations in real mode
-address space.
-
-1. xf86Int10InfoPtr xf86InitInt10(int entityIndex);
-
-This function should first find the screen assigned to the entity
-carrying entitiyIndex and then call
-
- Bool int10skip(ScrnInfoPtr pScrn)
-
-to find out if the user has requested not to initialize int10. If so
-xf86InitInt10() should return NULL. Otherwise an xf86Int10InfoRec
-should be allocated. This structure contains the following fields:
-
- a. int entityIndex - index of the entity whose BIOS is to be
- executed.
- b. int scrnIndex - index of the screen assigned the entity.
- c. pointer cpuRegs - pointer to a emulator/vm86-mode private
- structure. May hold cpu register values
- for the emulator.
- d. CARD16 BIOSseg - Video BIOS segment address.
- e. pointer private - pointer to a os specific data structure.
- f. struct _int10Mem* - pointer to a structure to hold the memory
- access functions for use by an emulator.
- g. int num - number of the int to be called.
- h. int ax..es,flags - CPU register values to pass to int-call.
-
-The Init function should initialize a-f. To initialize the emulator
-specific execute environment the function
-
- Bool xf86Int10ExecSetup(xf86Int10InfoPtr pInt)
-
-should be called. If this function returns FALSE any already allocated
-memory should be freed and xf86Int10Init(0 should exit returning NULL.
-
-If the platform has a PC like system BIOS it may be copied to or
-mapped into memory locations SYS_BIOS to SYS_SIZE-1 of the real mode
-memory environment of this process. Otherwise the helper function:
-
-int setup_system_bios(CARD32 base_addr);
-
-may be called to set up a rudimentary system BIOS sufficient to be
-used to boot video BIOSes. base_addr specifies the virtual address
-corresponding to SYS_BIOS in the real mode environment. If a PC-like
-int vector and BIOS data area is available it should be copied to 0 to
-LOW_PAGE_SIZE of the entities real mode environment. In this case the
-video interrupt related entries should be reset for all non-primary
-cards by calling:
-
-void reset_int_vect(xf86Int10InfoPtr pInt); To initialize the
-
-correct video BIOS entry points the BIOS must be warm-booted. If no
-PC-like int vector is available one can be set up by calling
-
-void setup_int_vect(xf86Int10InfoPtr pInt);
-
-In this case the video BIOS has to be warm-booted always. If the
-video BIOS for this entity has been installed during boot it may be
-mapped (or copied) directly to the correct address in the real mode
-memory environment. Otherwise
-
-int mapPciRom(xf86Int10InfoPtr pInt, unsigned char * address);
-
-should be called to copy the BIOS image from PCI ROM. 'address'
-specifies the address this image should be copied to. Sufficient space
-to hold an entire BIOS image should be allocated prior to calling
-mapPciRom(). This function will return the size of the BIOS image in
-bytes if it was able to successfully copy the image and 0
-otherwise. To create a well defined point to exit the softbooter
-
-void set_return_trap(xf86Int10Ptr pInt);
-
-may be called. It sets up a 'hlt' instruction in the emulator memory
-just above the BIOS variable area. Before entering real mode execution
-this address will be pushed onto the return stack. If the BIOS needs
-to be warm-booted this should be done before leaving xf86InitInt10()
-by setting num in the xf86Int10InfoRec to 0xe6 and calling
-
-void xf86ExecX86int10(xf86Int10IfoPtr pInt);
-
-The implementation of this function will be discussed below. This
-function should be wrapped by calls to void LockLegacyVGA(screen,
-legacyVGAPtr vga); and void UnlockLegacyVGA(screen, legacyVGAPtr vga);
-The struct vga is used to hold the state of the legacy VGA access
-registers if a legacy VGA device exists. xf86InitInt10() should
-return a pointer to the xf86Int10InfoRec allocated.
-
-2. Bool MapCurrentInt10(xf86Int10InfoPtr pInt);
-
-In case a platform specific mapping has to be performed to map the
-memory allocated for the real mode memory environment into a specific
-location prior to executing the x86 real mode code a function
-
- Bool MapCurrentInt10(xf86Int10InfoPtr pInt);
-
-has to be provided. It will be called by a helper function whenever
-the active entity changes. If the vm86 mode is used it is most likely
-that the 1MB real mode memory space located somewhere in the processes
-virtual memory will have to be remapped to address 0 of the virtual
-memory space.
-
-3. void xf86FreeInt10(xf86Int10InfoPtr pInt);
-
-To free all memory allocated for video BIOS calls of a specific entity
-the function
-
- void xf86FreeInt10(xf86Int10InfoPtr pInt);
-
-should be provided. If the entity to be freed was mapped by
-MapCurrentInt10() this mapping needs to be undone also.
-
-4.
- void * xf86Int10AllocPages(xf86Int10InfoPtr pInt,int num, int *off)
- void xf86Int10FreePages(xf86Int10InfoPtr pInt, void *pbase, int num)
-
-xf86Int10AllocPages() should allocate 'num' consecutive page-size
-chunks of memory. In real mode memory space this range needs to occupy
-consecutive addresses, too. The function must return the address of
-this memory. The offset in real mode memory needs to be returned in
-'off'. If no block of 'num' pages are available the function should
-return NULL.
-
-xf86Int10FreePages() will free the 'num' pages starting at 'pbase'.
-'num' is equal to the number of pages allocated by a single
-xf86Int10AllocatePages() call. 'pbase' is the address of the range
-previously returned by xf86Int10AllocatePages().
-
-II. Emulator specific functions
--------------------------------
-
-1. Bool xf86Int10ExecSetup(xf86Int10InfoPtr pInt);
-
-This function will be called from xf86InitInt10(). It may be used to
-set up the static emulator specific part of the real mode
-environment. On success it should return TRUE.
-
-2. xf86ExecX86int10(xf86Int10InfoPtr pInt);
-
-This function gets called to execute an int call. It may call the
-helper function:
-
- void setup_int(xf86Int10InfoPrt pInt);
-
-to copy the register values to the emulator specific locations and to
-set up the non-static real mode execution environment. On return from
-setup_int() 'Int10Current' holds a pointer to the current
-xf86Int10InfoRec.
-
-It should start execution by calling
-
- Bool int_handler(xf86Int10InfoPtr pInt);
-
-and if this function returns TRUE it should call whatever necessary to
-continue execution until a 'hlt' instruction is encountered. To copy
-the resulting register values back to the xf86Int10InfoRec structure
-
- void finish_int(xf86Int10InfoPtr pInt);
-
-should be called.
-
-Helper functions are provided to aid the implementation of a vm86
-call:
-
- Bool vm86_GP_fault(xf86Int10InfoPtr pInt);
-
-This function handles instructions which cause a vm86 call to
-trap. PIO access is handled by the in/out calls as defined in
-compiler.h. Optionally the PIO instructions can be logged by defining
-PRINT_PORT in xf86int10.h. This is meant for debugging purposes.
-
-Unknown instructions and 'hlt' cause vm86_GP_fault() to return
-FALSE. Otherwise TRUE is returned.
-
-Note: This function is currently based on the Linux vm86 call. It
-might have to be modified or even rewritten for other OS. So your
-milage may vary.
-
-Functions to dump memory, code, xf86 CPU register values and stack are
-also provided. Take a look at helper.c To view a memory range the
-function
-
- void dprint(unsigned long start, unsigned long size)
-
-is provided. The use should be self explanatory.
-
-Register and memory access functions are provided in helper_mem.c.
-The PIO register access functions can trap access to PCI config space
-access register (config method 1) if _PC is not defined.
-
-A header file 'defines.h' is required to define OS/emulator specific
-ways to access memory and xf86 CPU registers: Defines need to be
-provided for memory byte/work/long read/write access
-(MEM_RB(name,addr),MEM_RW(name,addr),MEM_RL(name,addr),
-MEM_WB(name,addr,val),MEM_WL(name,addr,val),MEM_WL(name,addr,val)) of
-the real mode memory environment. 'name' will contain a pointer to the
-current xf86Int10InfoRec. Currently defines are available for
-vm86-mode under Linux and x86emu. They may be activated by defining
-_X86EMU or _VM86_LINUX respectively.
-
-Note: Emulators usually are not able to pass this pointer when calling
-memory access functions. In this case a global variable should be
-defined which can hold this pointer. This variable can be set in
-MapCurrentInt10(). It also must be set in xf86InitInt10() if this
-function calls the memory access functions either directly or by
-calling xf86ExecX86int10(pInt). Defines to access the emulator
-specific xf86 CPU register locations are also required:
-X86_EAX,...,X86_EFLAGS for access of the full 32 bit registers,
-X86_AX...X86_FLAGS for access of the 16 bit registers and
-XF86_AL,XF86_BL,XF86_CL,XF86_DL to access the lower byte of the
-AX,BX,CX and DX register.
-
-
-$XFree86: xc/programs/Xserver/hw/xfree86/int10/INT10.HOWTO,v 1.2 2000/02/08 13:13:22 eich Exp $
+
+ INT10 X86 Real Mode executor
+ =============================
+
+ PRELIMINARY
+
+INT10 is a XFree86 module for soft-booting and executing real mode
+int10 BIOS calls. The BIOS call code is largely untested, yet.
+
+1. Usage
+========
+
+To use the int10 module in a driver the header file
+xfree86/os-support/int10/xf86int10.h must be included.
+
+ a. Initialization
+ -----------------
+
+The int10-executer gets initialized by calling:
+
+ xf86Int10InfoPtr xf86InitInt10(int entityIndex);
+
+The function will soft-boot any non-primary device and return a
+pointer to a xf86Int10InfoRec on success. If anything fails or if
+int10 execution is disabled by an option in the device section NULL
+will be returned. The driver should store this pointer for later
+calls to other int10 module functions.
+
+ b. Memory allocation
+ --------------------
+
+To allocate memory in the real mode execution environment
+
+ void * xf86Int10AllocPages(xf86Int10InfoPtr pInt,int num, int *off);
+
+can be called. It allocates num consecutive pagesize chunks. It
+returns the address of the allocated area. off is set to its offset in
+the real mode memory space.
+
+ void xf86Int10FreePages(xf86Int10InfoPtr pInt, void *pbase, int num);
+
+Is used to free num pages beginning at pbase.
+
+ c. Doing int10 BIOS calls
+ -------------------------
+
+The BIOS call is executed by calling:
+
+ void xf86ExecX86int10(xf86Int10InfoPtr pInt);
+
+The number of the interrupt (normally 10) and the initial values of
+the ax, bx, cx, dx, si, di and es x86-CPU registers can be set in the
+xf86Int10InfoRec passed to the function. On return this structure
+contains the exit values of the registers listed above and the CPU
+flag register.
+
+ d. De-initializing
+ -----------------
+
+If no further int10 calls are required for a certain chipset
+the driver should call:
+
+ void xf86FreeInt10(xf86Int10InfoPtr pInt);
+
+to free the memory allocated for real mode int10 calls.
+
+
+2. Porting issues
+=================
+
+The int10 real mode executor is designed to run on top of various x86
+CPU emulators as well as in vm86 mode of a real x86 CPU. If used with
+a CPU emulator the emulator and CPU specific interfaces can be held
+separate thus requiring minimal efforts to port the int10 module to
+new platforms. Currently an interface to the x86emu real mode
+emulator is provided. Since details of setting up and running the
+vm86 mode is platform dependent both the platform dependent
+environment and the emulation layer have to be ported. Several helper
+functions are provided for that.
+
+A CPU emulator should meet certain requirements to be usable
+for the INT10 executor:
+
+1. It must trap calls to intXX instructions and pass execution to an
+ external function which is allowed to modify CPU registers
+ including the instruction pointer (IP) before returning to the
+ emulator for continuing execution. When the external function is
+ called the IP must point to the instruction past the intXX call.
+
+2. The emulator should use externally provided functions to handle
+ PIO.
+
+3. The emulator should be able to use externally provided functions
+ to access memory from the real mode memory environment. Note, that
+ the vm86 mode usually requires one hunk of consecutive memory
+ starting at address 0 in the process virtual memory space. Thus if
+ this mode is to be used, the OS environment has to be able to provide
+ that, ie. it must be able to remap the processes virtual memory space
+ onto itself. If the emulator is able to handle memory access thru
+ externally provided functions the real mode process memory can be
+ located anywhere in the processes virtual memory. It does not even
+ have to be consecutive.
+
+4. The executor should terminate on encountering a 'hlt' instruction.
+
+
+Functions to implement:
+
+To simplify development the code has been split into a general setup
+part and an emulator specific one. A generic setup code is provided in
+generic.c. It should be usable with any emulator satisfying the
+conditions mentioned above. Therefore the following section on int10
+setup may be skipped when porting int10 to new emulator.
+
+If the vm86() is to be used no memory access functions can be used.
+Therefore the layout of the real mode memory image has to meet certain
+requirements. Therefore when porting to other platforms a new setup
+code may have to be designed, too. The following section will give
+guidelines how this may be done. A sample implementation using SysV
+IPC to map the appropriate real mode memory image to address 0 in
+virtual address space just prior to execution may be found in
+xfree86/os-support/linux/int10/linux.c.
+
+On non-PC like platforms emulation of certain PC features such as
+initialization of BIOS int vectors, sys_BIOS constants or PCI config
+method 1 can be turned on by defining _PC.
+
+I. Setup Code
+-------------
+
+This sets up the real mode memory image, calls the emulator to POST
+the chipset if required and maintains memory allocations in real mode
+address space.
+
+1. xf86Int10InfoPtr xf86InitInt10(int entityIndex);
+
+This function should first find the screen assigned to the entity
+carrying entitiyIndex and then call
+
+ Bool int10skip(ScrnInfoPtr pScrn)
+
+to find out if the user has requested not to initialize int10. If so
+xf86InitInt10() should return NULL. Otherwise an xf86Int10InfoRec
+should be allocated. This structure contains the following fields:
+
+ a. int entityIndex - index of the entity whose BIOS is to be
+ executed.
+ b. int scrnIndex - index of the screen assigned the entity.
+ c. pointer cpuRegs - pointer to a emulator/vm86-mode private
+ structure. May hold cpu register values
+ for the emulator.
+ d. CARD16 BIOSseg - Video BIOS segment address.
+ e. pointer private - pointer to a os specific data structure.
+ f. struct _int10Mem* - pointer to a structure to hold the memory
+ access functions for use by an emulator.
+ g. int num - number of the int to be called.
+ h. int ax..es,flags - CPU register values to pass to int-call.
+
+The Init function should initialize a-f. To initialize the emulator
+specific execute environment the function
+
+ Bool xf86Int10ExecSetup(xf86Int10InfoPtr pInt)
+
+should be called. If this function returns FALSE any already allocated
+memory should be freed and xf86Int10Init(0 should exit returning NULL.
+
+If the platform has a PC like system BIOS it may be copied to or
+mapped into memory locations SYS_BIOS to SYS_SIZE-1 of the real mode
+memory environment of this process. Otherwise the helper function:
+
+int setup_system_bios(CARD32 base_addr);
+
+may be called to set up a rudimentary system BIOS sufficient to be
+used to boot video BIOSes. base_addr specifies the virtual address
+corresponding to SYS_BIOS in the real mode environment. If a PC-like
+int vector and BIOS data area is available it should be copied to 0 to
+LOW_PAGE_SIZE of the entities real mode environment. In this case the
+video interrupt related entries should be reset for all non-primary
+cards by calling:
+
+void reset_int_vect(xf86Int10InfoPtr pInt); To initialize the
+
+correct video BIOS entry points the BIOS must be warm-booted. If no
+PC-like int vector is available one can be set up by calling
+
+void setup_int_vect(xf86Int10InfoPtr pInt);
+
+In this case the video BIOS has to be warm-booted always. If the
+video BIOS for this entity has been installed during boot it may be
+mapped (or copied) directly to the correct address in the real mode
+memory environment. Otherwise
+
+int mapPciRom(xf86Int10InfoPtr pInt, unsigned char * address);
+
+should be called to copy the BIOS image from PCI ROM. 'address'
+specifies the address this image should be copied to. Sufficient space
+to hold an entire BIOS image should be allocated prior to calling
+mapPciRom(). This function will return the size of the BIOS image in
+bytes if it was able to successfully copy the image and 0
+otherwise. To create a well defined point to exit the softbooter
+
+void set_return_trap(xf86Int10Ptr pInt);
+
+may be called. It sets up a 'hlt' instruction in the emulator memory
+just above the BIOS variable area. Before entering real mode execution
+this address will be pushed onto the return stack. If the BIOS needs
+to be warm-booted this should be done before leaving xf86InitInt10()
+by setting num in the xf86Int10InfoRec to 0xe6 and calling
+
+void xf86ExecX86int10(xf86Int10IfoPtr pInt);
+
+The implementation of this function will be discussed below. This
+function should be wrapped by calls to void LockLegacyVGA(screen,
+legacyVGAPtr vga); and void UnlockLegacyVGA(screen, legacyVGAPtr vga);
+The struct vga is used to hold the state of the legacy VGA access
+registers if a legacy VGA device exists. xf86InitInt10() should
+return a pointer to the xf86Int10InfoRec allocated.
+
+2. Bool MapCurrentInt10(xf86Int10InfoPtr pInt);
+
+In case a platform specific mapping has to be performed to map the
+memory allocated for the real mode memory environment into a specific
+location prior to executing the x86 real mode code a function
+
+ Bool MapCurrentInt10(xf86Int10InfoPtr pInt);
+
+has to be provided. It will be called by a helper function whenever
+the active entity changes. If the vm86 mode is used it is most likely
+that the 1MB real mode memory space located somewhere in the processes
+virtual memory will have to be remapped to address 0 of the virtual
+memory space.
+
+3. void xf86FreeInt10(xf86Int10InfoPtr pInt);
+
+To free all memory allocated for video BIOS calls of a specific entity
+the function
+
+ void xf86FreeInt10(xf86Int10InfoPtr pInt);
+
+should be provided. If the entity to be freed was mapped by
+MapCurrentInt10() this mapping needs to be undone also.
+
+4.
+ void * xf86Int10AllocPages(xf86Int10InfoPtr pInt,int num, int *off)
+ void xf86Int10FreePages(xf86Int10InfoPtr pInt, void *pbase, int num)
+
+xf86Int10AllocPages() should allocate 'num' consecutive page-size
+chunks of memory. In real mode memory space this range needs to occupy
+consecutive addresses, too. The function must return the address of
+this memory. The offset in real mode memory needs to be returned in
+'off'. If no block of 'num' pages are available the function should
+return NULL.
+
+xf86Int10FreePages() will free the 'num' pages starting at 'pbase'.
+'num' is equal to the number of pages allocated by a single
+xf86Int10AllocatePages() call. 'pbase' is the address of the range
+previously returned by xf86Int10AllocatePages().
+
+II. Emulator specific functions
+-------------------------------
+
+1. Bool xf86Int10ExecSetup(xf86Int10InfoPtr pInt);
+
+This function will be called from xf86InitInt10(). It may be used to
+set up the static emulator specific part of the real mode
+environment. On success it should return TRUE.
+
+2. xf86ExecX86int10(xf86Int10InfoPtr pInt);
+
+This function gets called to execute an int call. It may call the
+helper function:
+
+ void setup_int(xf86Int10InfoPrt pInt);
+
+to copy the register values to the emulator specific locations and to
+set up the non-static real mode execution environment. On return from
+setup_int() 'Int10Current' holds a pointer to the current
+xf86Int10InfoRec.
+
+It should start execution by calling
+
+ Bool int_handler(xf86Int10InfoPtr pInt);
+
+and if this function returns TRUE it should call whatever necessary to
+continue execution until a 'hlt' instruction is encountered. To copy
+the resulting register values back to the xf86Int10InfoRec structure
+
+ void finish_int(xf86Int10InfoPtr pInt);
+
+should be called.
+
+Helper functions are provided to aid the implementation of a vm86
+call:
+
+ Bool vm86_GP_fault(xf86Int10InfoPtr pInt);
+
+This function handles instructions which cause a vm86 call to
+trap. PIO access is handled by the in/out calls as defined in
+compiler.h. Optionally the PIO instructions can be logged by defining
+PRINT_PORT in xf86int10.h. This is meant for debugging purposes.
+
+Unknown instructions and 'hlt' cause vm86_GP_fault() to return
+FALSE. Otherwise TRUE is returned.
+
+Note: This function is currently based on the Linux vm86 call. It
+might have to be modified or even rewritten for other OS. So your
+milage may vary.
+
+Functions to dump memory, code, xf86 CPU register values and stack are
+also provided. Take a look at helper.c To view a memory range the
+function
+
+ void dprint(unsigned long start, unsigned long size)
+
+is provided. The use should be self explanatory.
+
+Register and memory access functions are provided in helper_mem.c.
+The PIO register access functions can trap access to PCI config space
+access register (config method 1) if _PC is not defined.
+
+A header file 'defines.h' is required to define OS/emulator specific
+ways to access memory and xf86 CPU registers: Defines need to be
+provided for memory byte/work/long read/write access
+(MEM_RB(name,addr),MEM_RW(name,addr),MEM_RL(name,addr),
+MEM_WB(name,addr,val),MEM_WL(name,addr,val),MEM_WL(name,addr,val)) of
+the real mode memory environment. 'name' will contain a pointer to the
+current xf86Int10InfoRec. Currently defines are available for
+vm86-mode under Linux and x86emu. They may be activated by defining
+_X86EMU or _VM86_LINUX respectively.
+
+Note: Emulators usually are not able to pass this pointer when calling
+memory access functions. In this case a global variable should be
+defined which can hold this pointer. This variable can be set in
+MapCurrentInt10(). It also must be set in xf86InitInt10() if this
+function calls the memory access functions either directly or by
+calling xf86ExecX86int10(pInt). Defines to access the emulator
+specific xf86 CPU register locations are also required:
+X86_EAX,...,X86_EFLAGS for access of the full 32 bit registers,
+X86_AX...X86_FLAGS for access of the 16 bit registers and
+XF86_AL,XF86_BL,XF86_CL,XF86_DL to access the lower byte of the
+AX,BX,CX and DX register.
+
+
+$XFree86: xc/programs/Xserver/hw/xfree86/int10/INT10.HOWTO,v 1.2 2000/02/08 13:13:22 eich Exp $
diff --git a/xorg-server/hw/xfree86/int10/Makefile.am b/xorg-server/hw/xfree86/int10/Makefile.am
index 58e1d0f25..f5ece69ef 100644
--- a/xorg-server/hw/xfree86/int10/Makefile.am
+++ b/xorg-server/hw/xfree86/int10/Makefile.am
@@ -1,46 +1,46 @@
-module_LTLIBRARIES = libint10.la
-
-sdk_HEADERS = xf86int10.h
-
-EXTRA_CFLAGS =
-
-libint10_la_LDFLAGS = -avoid-version
-libint10_la_LIBADD = $(PCIACCESS_LIBS)
-
-COMMON_SOURCES = \
- helper_exec.c \
- helper_mem.c \
- xf86int10.c \
- xf86int10module.c
-
-if I386_VIDEO
-I386_VIDEO_CFLAGS = -D_PC
-endif
-
-if INT10_VM86
-AM_CFLAGS = $(I386_VIDEO_CFLAGS) -D_VM86_LINUX $(DIX_CFLAGS) $(XORG_CFLAGS) $(EXTRA_CFLAGS)
-INCLUDES = $(XORG_INCS)
-libint10_la_SOURCES = \
- $(COMMON_SOURCES) \
- $(srcdir)/../os-support/linux/int10/vm86/linux_vm86.c \
- $(srcdir)/../os-support/linux/int10/linux.c
-endif
-
-if INT10_X86EMU
-AM_CFLAGS = $(I386_VIDEO_CFLAGS) -D_X86EMU -DNO_SYS_HEADERS \
- $(XORG_CFLAGS) $(EXTRA_CFLAGS) $(DIX_CFLAGS)
-INCLUDES = $(XORG_INCS) -I$(srcdir)/../x86emu
-libint10_la_SOURCES = \
- $(COMMON_SOURCES) \
- xf86x86emu.c \
- generic.c \
- x86emu.c
-endif
-
-if INT10_STUB
-AM_CFLAGS = $(I386_VIDEO_CFLAGS) -D_VM86_LINUX $(DIX_CFLAGS) $(XORG_CFLAGS) $(EXTRA_CFLAGS)
-INCLUDES = $(XORG_INCS)
-libint10_la_SOURCES = stub.c xf86int10module.c
-endif
-
-EXTRA_DIST = xf86x86emu.h INT10.HOWTO
+module_LTLIBRARIES = libint10.la
+
+sdk_HEADERS = xf86int10.h
+
+EXTRA_CFLAGS =
+
+libint10_la_LDFLAGS = -avoid-version
+libint10_la_LIBADD = $(PCIACCESS_LIBS)
+
+COMMON_SOURCES = \
+ helper_exec.c \
+ helper_mem.c \
+ xf86int10.c \
+ xf86int10module.c
+
+if I386_VIDEO
+I386_VIDEO_CFLAGS = -D_PC
+endif
+
+if INT10_VM86
+AM_CFLAGS = $(I386_VIDEO_CFLAGS) -D_VM86_LINUX $(DIX_CFLAGS) $(XORG_CFLAGS) $(EXTRA_CFLAGS)
+INCLUDES = $(XORG_INCS)
+libint10_la_SOURCES = \
+ $(COMMON_SOURCES) \
+ $(srcdir)/../os-support/linux/int10/vm86/linux_vm86.c \
+ $(srcdir)/../os-support/linux/int10/linux.c
+endif
+
+if INT10_X86EMU
+AM_CFLAGS = $(I386_VIDEO_CFLAGS) -D_X86EMU -DNO_SYS_HEADERS \
+ $(XORG_CFLAGS) $(EXTRA_CFLAGS) $(DIX_CFLAGS)
+INCLUDES = $(XORG_INCS) -I$(srcdir)/../x86emu
+libint10_la_SOURCES = \
+ $(COMMON_SOURCES) \
+ xf86x86emu.c \
+ generic.c \
+ x86emu.c
+endif
+
+if INT10_STUB
+AM_CFLAGS = $(I386_VIDEO_CFLAGS) -D_VM86_LINUX $(DIX_CFLAGS) $(XORG_CFLAGS) $(EXTRA_CFLAGS)
+INCLUDES = $(XORG_INCS)
+libint10_la_SOURCES = stub.c xf86int10module.c
+endif
+
+EXTRA_DIST = xf86x86emu.h INT10.HOWTO
diff --git a/xorg-server/hw/xfree86/int10/x86emu.c b/xorg-server/hw/xfree86/int10/x86emu.c
index 087059131..b3320e5b9 100644
--- a/xorg-server/hw/xfree86/int10/x86emu.c
+++ b/xorg-server/hw/xfree86/int10/x86emu.c
@@ -1,12 +1,12 @@
-
-#ifdef HAVE_XORG_CONFIG_H
-#include <xorg-config.h>
-#endif
-
-#include "debug.c"
-#include "decode.c"
-#include "fpu.c"
-#include "ops.c"
-#include "ops2.c"
-#include "prim_ops.c"
-#include "sys.c"
+
+#ifdef HAVE_XORG_CONFIG_H
+#include <xorg-config.h>
+#endif
+
+#include "debug.c"
+#include "decode.c"
+#include "fpu.c"
+#include "ops.c"
+#include "ops2.c"
+#include "prim_ops.c"
+#include "sys.c"
diff --git a/xorg-server/hw/xfree86/int10/xf86x86emu.h b/xorg-server/hw/xfree86/int10/xf86x86emu.h
index 320ad6fa8..4af2dafb7 100644
--- a/xorg-server/hw/xfree86/int10/xf86x86emu.h
+++ b/xorg-server/hw/xfree86/int10/xf86x86emu.h
@@ -1,54 +1,54 @@
-/*
- * XFree86 int10 module
- * execute BIOS int 10h calls in x86 real mode environment
- * Copyright 1999 Egbert Eich
- */
-#ifdef HAVE_XORG_CONFIG_H
-#include <xorg-config.h>
-#endif
-
-#ifndef XF86X86EMU_H_
-#define XF86X86EMU_H_
-#include <x86emu.h>
-
-#define M _X86EMU_env
-
-#define X86_EAX M.x86.R_EAX
-#define X86_EBX M.x86.R_EBX
-#define X86_ECX M.x86.R_ECX
-#define X86_EDX M.x86.R_EDX
-#define X86_ESI M.x86.R_ESI
-#define X86_EDI M.x86.R_EDI
-#define X86_EBP M.x86.R_EBP
-#define X86_EIP M.x86.R_EIP
-#define X86_ESP M.x86.R_ESP
-#define X86_EFLAGS M.x86.R_EFLG
-
-#define X86_FLAGS M.x86.R_FLG
-#define X86_AX M.x86.R_AX
-#define X86_BX M.x86.R_BX
-#define X86_CX M.x86.R_CX
-#define X86_DX M.x86.R_DX
-#define X86_SI M.x86.R_SI
-#define X86_DI M.x86.R_DI
-#define X86_BP M.x86.R_BP
-#define X86_IP M.x86.R_IP
-#define X86_SP M.x86.R_SP
-#define X86_CS M.x86.R_CS
-#define X86_DS M.x86.R_DS
-#define X86_ES M.x86.R_ES
-#define X86_SS M.x86.R_SS
-#define X86_FS M.x86.R_FS
-#define X86_GS M.x86.R_GS
-
-#define X86_AL M.x86.R_AL
-#define X86_BL M.x86.R_BL
-#define X86_CL M.x86.R_CL
-#define X86_DL M.x86.R_DL
-
-#define X86_AH M.x86.R_AH
-#define X86_BH M.x86.R_BH
-#define X86_CH M.x86.R_CH
-#define X86_DH M.x86.R_DH
-
-#endif
+/*
+ * XFree86 int10 module
+ * execute BIOS int 10h calls in x86 real mode environment
+ * Copyright 1999 Egbert Eich
+ */
+#ifdef HAVE_XORG_CONFIG_H
+#include <xorg-config.h>
+#endif
+
+#ifndef XF86X86EMU_H_
+#define XF86X86EMU_H_
+#include <x86emu.h>
+
+#define M _X86EMU_env
+
+#define X86_EAX M.x86.R_EAX
+#define X86_EBX M.x86.R_EBX
+#define X86_ECX M.x86.R_ECX
+#define X86_EDX M.x86.R_EDX
+#define X86_ESI M.x86.R_ESI
+#define X86_EDI M.x86.R_EDI
+#define X86_EBP M.x86.R_EBP
+#define X86_EIP M.x86.R_EIP
+#define X86_ESP M.x86.R_ESP
+#define X86_EFLAGS M.x86.R_EFLG
+
+#define X86_FLAGS M.x86.R_FLG
+#define X86_AX M.x86.R_AX
+#define X86_BX M.x86.R_BX
+#define X86_CX M.x86.R_CX
+#define X86_DX M.x86.R_DX
+#define X86_SI M.x86.R_SI
+#define X86_DI M.x86.R_DI
+#define X86_BP M.x86.R_BP
+#define X86_IP M.x86.R_IP
+#define X86_SP M.x86.R_SP
+#define X86_CS M.x86.R_CS
+#define X86_DS M.x86.R_DS
+#define X86_ES M.x86.R_ES
+#define X86_SS M.x86.R_SS
+#define X86_FS M.x86.R_FS
+#define X86_GS M.x86.R_GS
+
+#define X86_AL M.x86.R_AL
+#define X86_BL M.x86.R_BL
+#define X86_CL M.x86.R_CL
+#define X86_DL M.x86.R_DL
+
+#define X86_AH M.x86.R_AH
+#define X86_BH M.x86.R_BH
+#define X86_CH M.x86.R_CH
+#define X86_DH M.x86.R_DH
+
+#endif