diff options
Diffstat (limited to 'xorg-server/hw/xfree86/modes/xf86Crtc.c')
-rw-r--r-- | xorg-server/hw/xfree86/modes/xf86Crtc.c | 2768 |
1 files changed, 2768 insertions, 0 deletions
diff --git a/xorg-server/hw/xfree86/modes/xf86Crtc.c b/xorg-server/hw/xfree86/modes/xf86Crtc.c new file mode 100644 index 000000000..1facf86e9 --- /dev/null +++ b/xorg-server/hw/xfree86/modes/xf86Crtc.c @@ -0,0 +1,2768 @@ +/* + * Copyright © 2006 Keith Packard + * Copyright © 2008 Red Hat, Inc. + * + * Permission to use, copy, modify, distribute, and sell this software and its + * documentation for any purpose is hereby granted without fee, provided that + * the above copyright notice appear in all copies and that both that copyright + * notice and this permission notice appear in supporting documentation, and + * that the name of the copyright holders not be used in advertising or + * publicity pertaining to distribution of the software without specific, + * written prior permission. The copyright holders make no representations + * about the suitability of this software for any purpose. It is provided "as + * is" without express or implied warranty. + * + * THE COPYRIGHT HOLDERS DISCLAIM ALL WARRANTIES WITH REGARD TO THIS SOFTWARE, + * INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO + * EVENT SHALL THE COPYRIGHT HOLDERS BE LIABLE FOR ANY SPECIAL, INDIRECT OR + * CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, + * DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER + * TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE + * OF THIS SOFTWARE. + */ + +#ifdef HAVE_XORG_CONFIG_H +#include <xorg-config.h> +#else +#ifdef HAVE_CONFIG_H +#include <config.h> +#endif +#endif + +#include <stddef.h> +#include <string.h> +#include <stdio.h> + +#include "xf86.h" +#include "xf86DDC.h" +#include "xf86Crtc.h" +#include "xf86Modes.h" +#include "xf86Priv.h" +#include "xf86RandR12.h" +#include "X11/extensions/render.h" +#define DPMS_SERVER +#include "X11/extensions/dpms.h" +#include "X11/Xatom.h" +#ifdef RENDER +#include "picturestr.h" +#endif + +#include "xf86xv.h" + +/* + * Initialize xf86CrtcConfig structure + */ + +int xf86CrtcConfigPrivateIndex = -1; + +_X_EXPORT void +xf86CrtcConfigInit (ScrnInfoPtr scrn, + const xf86CrtcConfigFuncsRec *funcs) +{ + xf86CrtcConfigPtr config; + + if (xf86CrtcConfigPrivateIndex == -1) + xf86CrtcConfigPrivateIndex = xf86AllocateScrnInfoPrivateIndex(); + config = xnfcalloc (1, sizeof (xf86CrtcConfigRec)); + + config->funcs = funcs; + + scrn->privates[xf86CrtcConfigPrivateIndex].ptr = config; +} + +_X_EXPORT void +xf86CrtcSetSizeRange (ScrnInfoPtr scrn, + int minWidth, int minHeight, + int maxWidth, int maxHeight) +{ + xf86CrtcConfigPtr config = XF86_CRTC_CONFIG_PTR(scrn); + + config->minWidth = minWidth; + config->minHeight = minHeight; + config->maxWidth = maxWidth; + config->maxHeight = maxHeight; +} + +/* + * Crtc functions + */ +_X_EXPORT xf86CrtcPtr +xf86CrtcCreate (ScrnInfoPtr scrn, + const xf86CrtcFuncsRec *funcs) +{ + xf86CrtcConfigPtr xf86_config = XF86_CRTC_CONFIG_PTR(scrn); + xf86CrtcPtr crtc, *crtcs; + + crtc = xcalloc (sizeof (xf86CrtcRec), 1); + if (!crtc) + return NULL; + crtc->scrn = scrn; + crtc->funcs = funcs; +#ifdef RANDR_12_INTERFACE + crtc->randr_crtc = NULL; +#endif + crtc->rotation = RR_Rotate_0; + crtc->desiredRotation = RR_Rotate_0; + if (xf86_config->crtc) + crtcs = xrealloc (xf86_config->crtc, + (xf86_config->num_crtc + 1) * sizeof (xf86CrtcPtr)); + else + crtcs = xalloc ((xf86_config->num_crtc + 1) * sizeof (xf86CrtcPtr)); + if (!crtcs) + { + xfree (crtc); + return NULL; + } + xf86_config->crtc = crtcs; + xf86_config->crtc[xf86_config->num_crtc++] = crtc; + return crtc; +} + +_X_EXPORT void +xf86CrtcDestroy (xf86CrtcPtr crtc) +{ + xf86CrtcConfigPtr xf86_config = XF86_CRTC_CONFIG_PTR(crtc->scrn); + int c; + + (*crtc->funcs->destroy) (crtc); + for (c = 0; c < xf86_config->num_crtc; c++) + if (xf86_config->crtc[c] == crtc) + { + memmove (&xf86_config->crtc[c], + &xf86_config->crtc[c+1], + ((xf86_config->num_crtc - (c + 1)) * sizeof(void*))); + xf86_config->num_crtc--; + break; + } + xfree (crtc); +} + + +/** + * Return whether any outputs are connected to the specified pipe + */ + +_X_EXPORT Bool +xf86CrtcInUse (xf86CrtcPtr crtc) +{ + ScrnInfoPtr pScrn = crtc->scrn; + xf86CrtcConfigPtr xf86_config = XF86_CRTC_CONFIG_PTR(pScrn); + int o; + + for (o = 0; o < xf86_config->num_output; o++) + if (xf86_config->output[o]->crtc == crtc) + return TRUE; + return FALSE; +} + +_X_EXPORT void +xf86CrtcSetScreenSubpixelOrder (ScreenPtr pScreen) +{ +#ifdef RENDER + int subpixel_order = SubPixelUnknown; + Bool has_none = FALSE; + ScrnInfoPtr scrn = xf86Screens[pScreen->myNum]; + xf86CrtcConfigPtr xf86_config = XF86_CRTC_CONFIG_PTR(scrn); + int c, o; + + for (c = 0; c < xf86_config->num_crtc; c++) + { + xf86CrtcPtr crtc = xf86_config->crtc[c]; + + for (o = 0; o < xf86_config->num_output; o++) + { + xf86OutputPtr output = xf86_config->output[o]; + + if (output->crtc == crtc) + { + switch (output->subpixel_order) { + case SubPixelNone: + has_none = TRUE; + break; + case SubPixelUnknown: + break; + default: + subpixel_order = output->subpixel_order; + break; + } + } + if (subpixel_order != SubPixelUnknown) + break; + } + if (subpixel_order != SubPixelUnknown) + { + static const int circle[4] = { + SubPixelHorizontalRGB, + SubPixelVerticalRGB, + SubPixelHorizontalBGR, + SubPixelVerticalBGR, + }; + int rotate; + int c; + for (rotate = 0; rotate < 4; rotate++) + if (crtc->rotation & (1 << rotate)) + break; + for (c = 0; c < 4; c++) + if (circle[c] == subpixel_order) + break; + c = (c + rotate) & 0x3; + if ((crtc->rotation & RR_Reflect_X) && !(c & 1)) + c ^= 2; + if ((crtc->rotation & RR_Reflect_Y) && (c & 1)) + c ^= 2; + subpixel_order = circle[c]; + break; + } + } + if (subpixel_order == SubPixelUnknown && has_none) + subpixel_order = SubPixelNone; + PictureSetSubpixelOrder (pScreen, subpixel_order); +#endif +} + +/** + * Sets the given video mode on the given crtc + */ +_X_EXPORT Bool +xf86CrtcSetMode (xf86CrtcPtr crtc, DisplayModePtr mode, Rotation rotation, + int x, int y) +{ + ScrnInfoPtr scrn = crtc->scrn; + xf86CrtcConfigPtr xf86_config = XF86_CRTC_CONFIG_PTR(scrn); + int i; + Bool ret = FALSE; + Bool didLock = FALSE; + DisplayModePtr adjusted_mode; + DisplayModeRec saved_mode; + int saved_x, saved_y; + Rotation saved_rotation; + + if (crtc->funcs->set_mode_major) + return crtc->funcs->set_mode_major(crtc, mode, rotation, x, y); + + crtc->enabled = xf86CrtcInUse (crtc); + + if (!crtc->enabled) + { + /* XXX disable crtc? */ + return TRUE; + } + + adjusted_mode = xf86DuplicateMode(mode); + + didLock = crtc->funcs->lock (crtc); + + saved_mode = crtc->mode; + saved_x = crtc->x; + saved_y = crtc->y; + saved_rotation = crtc->rotation; + /* Update crtc values up front so the driver can rely on them for mode + * setting. + */ + crtc->mode = *mode; + crtc->x = x; + crtc->y = y; + crtc->rotation = rotation; + + /* Shift offsets that move us out of virtual size */ + if (x + mode->HDisplay > xf86_config->maxWidth || + y + mode->VDisplay > xf86_config->maxHeight) + { + if (x + mode->HDisplay > xf86_config->maxWidth) + crtc->x = xf86_config->maxWidth - mode->HDisplay; + if (y + mode->VDisplay > xf86_config->maxHeight) + crtc->y = xf86_config->maxHeight - mode->VDisplay; + if (crtc->x < 0 || crtc->y < 0) + { + xf86DrvMsg (scrn->scrnIndex, X_ERROR, + "Mode %dx%d does not fit virtual size %dx%d - " + "internal error\n", mode->HDisplay, mode->VDisplay, + xf86_config->maxWidth, xf86_config->maxHeight); + goto done; + } + xf86DrvMsg (scrn->scrnIndex, X_ERROR, + "Mode %dx%d+%d+%d does not fit virtual size %dx%d - " + "offset updated to +%d+%d\n", + mode->HDisplay, mode->VDisplay, x, y, + xf86_config->maxWidth, xf86_config->maxHeight, + crtc->x, crtc->y); + } + + /* XXX short-circuit changes to base location only */ + + /* Pass our mode to the outputs and the CRTC to give them a chance to + * adjust it according to limitations or output properties, and also + * a chance to reject the mode entirely. + */ + for (i = 0; i < xf86_config->num_output; i++) { + xf86OutputPtr output = xf86_config->output[i]; + + if (output->crtc != crtc) + continue; + + if (!output->funcs->mode_fixup(output, mode, adjusted_mode)) { + goto done; + } + } + + if (!crtc->funcs->mode_fixup(crtc, mode, adjusted_mode)) { + goto done; + } + + if (!xf86CrtcRotate (crtc, mode, rotation)) { + goto done; + } + + /* Prepare the outputs and CRTCs before setting the mode. */ + for (i = 0; i < xf86_config->num_output; i++) { + xf86OutputPtr output = xf86_config->output[i]; + + if (output->crtc != crtc) + continue; + + /* Disable the output as the first thing we do. */ + output->funcs->prepare(output); + } + + crtc->funcs->prepare(crtc); + + /* Set up the DPLL and any output state that needs to adjust or depend + * on the DPLL. + */ + crtc->funcs->mode_set(crtc, mode, adjusted_mode, crtc->x, crtc->y); + for (i = 0; i < xf86_config->num_output; i++) + { + xf86OutputPtr output = xf86_config->output[i]; + if (output->crtc == crtc) + output->funcs->mode_set(output, mode, adjusted_mode); + } + + /* Now, enable the clocks, plane, pipe, and outputs that we set up. */ + crtc->funcs->commit(crtc); + for (i = 0; i < xf86_config->num_output; i++) + { + xf86OutputPtr output = xf86_config->output[i]; + if (output->crtc == crtc) + { + output->funcs->commit(output); +#ifdef RANDR_12_INTERFACE + if (output->randr_output) + RRPostPendingProperties (output->randr_output); +#endif + } + } + + /* XXX free adjustedmode */ + ret = TRUE; + if (scrn->pScreen) + xf86CrtcSetScreenSubpixelOrder (scrn->pScreen); + +done: + if (!ret) { + crtc->x = saved_x; + crtc->y = saved_y; + crtc->rotation = saved_rotation; + crtc->mode = saved_mode; + } + + if (didLock) + crtc->funcs->unlock (crtc); + + return ret; +} + +/* + * Output functions + */ + +extern XF86ConfigPtr xf86configptr; + +typedef enum { + OPTION_PREFERRED_MODE, + OPTION_POSITION, + OPTION_BELOW, + OPTION_RIGHT_OF, + OPTION_ABOVE, + OPTION_LEFT_OF, + OPTION_ENABLE, + OPTION_DISABLE, + OPTION_MIN_CLOCK, + OPTION_MAX_CLOCK, + OPTION_IGNORE, + OPTION_ROTATE, +} OutputOpts; + +static OptionInfoRec xf86OutputOptions[] = { + {OPTION_PREFERRED_MODE, "PreferredMode", OPTV_STRING, {0}, FALSE }, + {OPTION_POSITION, "Position", OPTV_STRING, {0}, FALSE }, + {OPTION_BELOW, "Below", OPTV_STRING, {0}, FALSE }, + {OPTION_RIGHT_OF, "RightOf", OPTV_STRING, {0}, FALSE }, + {OPTION_ABOVE, "Above", OPTV_STRING, {0}, FALSE }, + {OPTION_LEFT_OF, "LeftOf", OPTV_STRING, {0}, FALSE }, + {OPTION_ENABLE, "Enable", OPTV_BOOLEAN, {0}, FALSE }, + {OPTION_DISABLE, "Disable", OPTV_BOOLEAN, {0}, FALSE }, + {OPTION_MIN_CLOCK, "MinClock", OPTV_FREQ, {0}, FALSE }, + {OPTION_MAX_CLOCK, "MaxClock", OPTV_FREQ, {0}, FALSE }, + {OPTION_IGNORE, "Ignore", OPTV_BOOLEAN, {0}, FALSE }, + {OPTION_ROTATE, "Rotate", OPTV_STRING, {0}, FALSE }, + {-1, NULL, OPTV_NONE, {0}, FALSE }, +}; + +enum { + OPTION_MODEDEBUG, +}; + +static OptionInfoRec xf86DeviceOptions[] = { + {OPTION_MODEDEBUG, "ModeDebug", OPTV_STRING, {0}, FALSE }, + {-1, NULL, OPTV_NONE, {0}, FALSE }, +}; + +static void +xf86OutputSetMonitor (xf86OutputPtr output) +{ + char *option_name; + static const char monitor_prefix[] = "monitor-"; + char *monitor; + + if (!output->name) + return; + + if (output->options) + xfree (output->options); + + output->options = xnfalloc (sizeof (xf86OutputOptions)); + memcpy (output->options, xf86OutputOptions, sizeof (xf86OutputOptions)); + + option_name = xnfalloc (strlen (monitor_prefix) + + strlen (output->name) + 1); + strcpy (option_name, monitor_prefix); + strcat (option_name, output->name); + monitor = xf86findOptionValue (output->scrn->options, option_name); + if (!monitor) + monitor = output->name; + else + xf86MarkOptionUsedByName (output->scrn->options, option_name); + xfree (option_name); + output->conf_monitor = xf86findMonitor (monitor, + xf86configptr->conf_monitor_lst); + /* + * Find the monitor section of the screen and use that + */ + if (!output->conf_monitor && output->use_screen_monitor) + output->conf_monitor = xf86findMonitor (output->scrn->monitor->id, + xf86configptr->conf_monitor_lst); + if (output->conf_monitor) + { + xf86DrvMsg (output->scrn->scrnIndex, X_INFO, + "Output %s using monitor section %s\n", + output->name, output->conf_monitor->mon_identifier); + xf86ProcessOptions (output->scrn->scrnIndex, + output->conf_monitor->mon_option_lst, + output->options); + } + else + xf86DrvMsg (output->scrn->scrnIndex, X_INFO, + "Output %s has no monitor section\n", + output->name); +} + +static Bool +xf86OutputEnabled (xf86OutputPtr output, Bool strict) +{ + Bool enable, disable; + + /* check to see if this output was enabled in the config file */ + if (xf86GetOptValBool (output->options, OPTION_ENABLE, &enable) && enable) + { + xf86DrvMsg (output->scrn->scrnIndex, X_INFO, + "Output %s enabled by config file\n", output->name); + return TRUE; + } + /* or if this output was disabled in the config file */ + if (xf86GetOptValBool (output->options, OPTION_DISABLE, &disable) && disable) + { + xf86DrvMsg (output->scrn->scrnIndex, X_INFO, + "Output %s disabled by config file\n", output->name); + return FALSE; + } + + /* If not, try to only light up the ones we know are connected */ + if (strict) { + enable = output->status == XF86OutputStatusConnected; + } + /* But if that fails, try to light up even outputs we're unsure of */ + else { + enable = output->status != XF86OutputStatusDisconnected; + } + + xf86DrvMsg (output->scrn->scrnIndex, X_INFO, + "Output %s %sconnected\n", output->name, enable ? "" : "dis"); + return enable; +} + +static Bool +xf86OutputIgnored (xf86OutputPtr output) +{ + return xf86ReturnOptValBool (output->options, OPTION_IGNORE, FALSE); +} + +static char *direction[4] = { + "normal", + "left", + "inverted", + "right" +}; + +static Rotation +xf86OutputInitialRotation (xf86OutputPtr output) +{ + char *rotate_name = xf86GetOptValString (output->options, + OPTION_ROTATE); + int i; + + if (!rotate_name) + return RR_Rotate_0; + + for (i = 0; i < 4; i++) + if (xf86nameCompare (direction[i], rotate_name) == 0) + return (1 << i); + return RR_Rotate_0; +} + +_X_EXPORT xf86OutputPtr +xf86OutputCreate (ScrnInfoPtr scrn, + const xf86OutputFuncsRec *funcs, + const char *name) +{ + xf86OutputPtr output, *outputs; + xf86CrtcConfigPtr xf86_config = XF86_CRTC_CONFIG_PTR(scrn); + int len; + + if (name) + len = strlen (name) + 1; + else + len = 0; + + output = xcalloc (sizeof (xf86OutputRec) + len, 1); + if (!output) + return NULL; + output->scrn = scrn; + output->funcs = funcs; + if (name) + { + output->name = (char *) (output + 1); + strcpy (output->name, name); + } + output->subpixel_order = SubPixelUnknown; + /* + * Use the old per-screen monitor section for the first output + */ + output->use_screen_monitor = (xf86_config->num_output == 0); +#ifdef RANDR_12_INTERFACE + output->randr_output = NULL; +#endif + if (name) + { + xf86OutputSetMonitor (output); + if (xf86OutputIgnored (output)) + { + xfree (output); + return FALSE; + } + } + + + if (xf86_config->output) + outputs = xrealloc (xf86_config->output, + (xf86_config->num_output + 1) * sizeof (xf86OutputPtr)); + else + outputs = xalloc ((xf86_config->num_output + 1) * sizeof (xf86OutputPtr)); + if (!outputs) + { + xfree (output); + return NULL; + } + + xf86_config->output = outputs; + xf86_config->output[xf86_config->num_output++] = output; + + return output; +} + +_X_EXPORT Bool +xf86OutputRename (xf86OutputPtr output, const char *name) +{ + int len = strlen(name) + 1; + char *newname = xalloc (len); + + if (!newname) + return FALSE; /* so sorry... */ + + strcpy (newname, name); + if (output->name && output->name != (char *) (output + 1)) + xfree (output->name); + output->name = newname; + xf86OutputSetMonitor (output); + if (xf86OutputIgnored (output)) + return FALSE; + return TRUE; +} + +_X_EXPORT void +xf86OutputUseScreenMonitor (xf86OutputPtr output, Bool use_screen_monitor) +{ + if (use_screen_monitor != output->use_screen_monitor) + { + output->use_screen_monitor = use_screen_monitor; + xf86OutputSetMonitor (output); + } +} + +_X_EXPORT void +xf86OutputDestroy (xf86OutputPtr output) +{ + ScrnInfoPtr scrn = output->scrn; + xf86CrtcConfigPtr xf86_config = XF86_CRTC_CONFIG_PTR(scrn); + int o; + + (*output->funcs->destroy) (output); + while (output->probed_modes) + xf86DeleteMode (&output->probed_modes, output->probed_modes); + for (o = 0; o < xf86_config->num_output; o++) + if (xf86_config->output[o] == output) + { + memmove (&xf86_config->output[o], + &xf86_config->output[o+1], + ((xf86_config->num_output - (o + 1)) * sizeof(void*))); + xf86_config->num_output--; + break; + } + if (output->name && output->name != (char *) (output + 1)) + xfree (output->name); + xfree (output); +} + +/* + * Called during CreateScreenResources to hook up RandR + */ +static Bool +xf86CrtcCreateScreenResources (ScreenPtr screen) +{ + ScrnInfoPtr scrn = xf86Screens[screen->myNum]; + xf86CrtcConfigPtr config = XF86_CRTC_CONFIG_PTR(scrn); + + screen->CreateScreenResources = config->CreateScreenResources; + + if (!(*screen->CreateScreenResources)(screen)) + return FALSE; + + if (!xf86RandR12CreateScreenResources (screen)) + return FALSE; + + return TRUE; +} + +/* + * Clean up config on server reset + */ +static Bool +xf86CrtcCloseScreen (int index, ScreenPtr screen) +{ + ScrnInfoPtr scrn = xf86Screens[screen->myNum]; + xf86CrtcConfigPtr config = XF86_CRTC_CONFIG_PTR(scrn); + int o, c; + + screen->CloseScreen = config->CloseScreen; + + xf86RotateCloseScreen (screen); + + for (o = 0; o < config->num_output; o++) + { + xf86OutputPtr output = config->output[o]; + + output->randr_output = NULL; + } + for (c = 0; c < config->num_crtc; c++) + { + xf86CrtcPtr crtc = config->crtc[c]; + + crtc->randr_crtc = NULL; + } + return screen->CloseScreen (index, screen); +} + +/* + * Called at ScreenInit time to set up + */ +_X_EXPORT Bool +xf86CrtcScreenInit (ScreenPtr screen) +{ + ScrnInfoPtr scrn = xf86Screens[screen->myNum]; + xf86CrtcConfigPtr config = XF86_CRTC_CONFIG_PTR(scrn); + int c; + + /* Rotation */ + xf86DrvMsg(scrn->scrnIndex, X_INFO, "RandR 1.2 enabled, ignore the following RandR disabled message.\n"); + xf86DisableRandR(); /* Disable old RandR extension support */ + xf86RandR12Init (screen); + + /* support all rotations if every crtc has the shadow alloc funcs */ + for (c = 0; c < config->num_crtc; c++) + { + xf86CrtcPtr crtc = config->crtc[c]; + if (!crtc->funcs->shadow_allocate || !crtc->funcs->shadow_create) + break; + } + if (c == config->num_crtc) + xf86RandR12SetRotations (screen, RR_Rotate_0 | RR_Rotate_90 | + RR_Rotate_180 | RR_Rotate_270 | + RR_Reflect_X | RR_Reflect_Y); + else + xf86RandR12SetRotations (screen, RR_Rotate_0); + + /* Wrap CreateScreenResources so we can initialize the RandR code */ + config->CreateScreenResources = screen->CreateScreenResources; + screen->CreateScreenResources = xf86CrtcCreateScreenResources; + + config->CloseScreen = screen->CloseScreen; + screen->CloseScreen = xf86CrtcCloseScreen; + + return TRUE; +} + +static DisplayModePtr +xf86DefaultMode (xf86OutputPtr output, int width, int height) +{ + DisplayModePtr target_mode = NULL; + DisplayModePtr mode; + int target_diff = 0; + int target_preferred = 0; + int mm_height; + + mm_height = output->mm_height; + if (!mm_height) + mm_height = (768 * 25.4) / DEFAULT_DPI; + /* + * Pick a mode closest to DEFAULT_DPI + */ + for (mode = output->probed_modes; mode; mode = mode->next) + { + int dpi; + int preferred = (((mode->type & M_T_PREFERRED) != 0) + + ((mode->type & M_T_USERPREF) != 0)); + int diff; + + if (xf86ModeWidth (mode, output->initial_rotation) > width || + xf86ModeHeight (mode, output->initial_rotation) > height) + continue; + + /* yes, use VDisplay here, not xf86ModeHeight */ + dpi = (mode->VDisplay * 254) / (mm_height * 10); + diff = dpi - DEFAULT_DPI; + diff = diff < 0 ? -diff : diff; + if (target_mode == NULL || (preferred > target_preferred) || + (preferred == target_preferred && diff < target_diff)) + { + target_mode = mode; + target_diff = diff; + target_preferred = preferred; + } + } + return target_mode; +} + +static DisplayModePtr +xf86ClosestMode (xf86OutputPtr output, + DisplayModePtr match, Rotation match_rotation, + int width, int height) +{ + DisplayModePtr target_mode = NULL; + DisplayModePtr mode; + int target_diff = 0; + + /* + * Pick a mode closest to the specified mode + */ + for (mode = output->probed_modes; mode; mode = mode->next) + { + int dx, dy; + int diff; + + if (xf86ModeWidth (mode, output->initial_rotation) > width || + xf86ModeHeight (mode, output->initial_rotation) > height) + continue; + + /* exact matches are preferred */ + if (output->initial_rotation == match_rotation && + xf86ModesEqual (mode, match)) + return mode; + + dx = xf86ModeWidth (match, match_rotation) - xf86ModeWidth (mode, output->initial_rotation); + dy = xf86ModeHeight (match, match_rotation) - xf86ModeHeight (mode, output->initial_rotation); + diff = dx * dx + dy * dy; + if (target_mode == NULL || diff < target_diff) + { + target_mode = mode; + target_diff = diff; + } + } + return target_mode; +} + +static DisplayModePtr +xf86OutputHasPreferredMode (xf86OutputPtr output, int width, int height) +{ + DisplayModePtr mode; + + for (mode = output->probed_modes; mode; mode = mode->next) + { + if (xf86ModeWidth (mode, output->initial_rotation) > width || + xf86ModeHeight (mode, output->initial_rotation) > height) + continue; + + if (mode->type & M_T_PREFERRED) + return mode; + } + return NULL; +} + +static DisplayModePtr +xf86OutputHasUserPreferredMode (xf86OutputPtr output) +{ + DisplayModePtr mode, first = output->probed_modes; + + for (mode = first; mode && mode->next != first; mode = mode->next) + if (mode->type & M_T_USERPREF) + return mode; + + return NULL; +} + +static int +xf86PickCrtcs (ScrnInfoPtr scrn, + xf86CrtcPtr *best_crtcs, + DisplayModePtr *modes, + int n, + int width, + int height) +{ + xf86CrtcConfigPtr config = XF86_CRTC_CONFIG_PTR(scrn); + int c, o; + xf86OutputPtr output; + xf86CrtcPtr crtc; + xf86CrtcPtr *crtcs; + xf86CrtcPtr best_crtc; + int best_score; + int score; + int my_score; + + if (n == config->num_output) + return 0; + output = config->output[n]; + + /* + * Compute score with this output disabled + */ + best_crtcs[n] = NULL; + best_crtc = NULL; + best_score = xf86PickCrtcs (scrn, best_crtcs, modes, n+1, width, height); + if (modes[n] == NULL) + return best_score; + + crtcs = xalloc (config->num_output * sizeof (xf86CrtcPtr)); + if (!crtcs) + return best_score; + + my_score = 1; + /* Score outputs that are known to be connected higher */ + if (output->status == XF86OutputStatusConnected) + my_score++; + /* Score outputs with preferred modes higher */ + if (xf86OutputHasPreferredMode (output, width, height)) + my_score++; + /* + * Select a crtc for this output and + * then attempt to configure the remaining + * outputs + */ + for (c = 0; c < config->num_crtc; c++) + { + if ((output->possible_crtcs & (1 << c)) == 0) + continue; + + crtc = config->crtc[c]; + /* + * Check to see if some other output is + * using this crtc + */ + for (o = 0; o < n; o++) + if (best_crtcs[o] == crtc) + break; + if (o < n) + { + /* + * If the two outputs desire the same mode, + * see if they can be cloned + */ + if (xf86ModesEqual (modes[o], modes[n]) && + config->output[0]->initial_rotation == config->output[n]->initial_rotation && + config->output[o]->initial_x == config->output[n]->initial_x && + config->output[o]->initial_y == config->output[n]->initial_y) + { + if ((output->possible_clones & (1 << o)) == 0) + continue; /* nope, try next CRTC */ + } + else + continue; /* different modes, can't clone */ + } + crtcs[n] = crtc; + memcpy (crtcs, best_crtcs, n * sizeof (xf86CrtcPtr)); + score = my_score + xf86PickCrtcs (scrn, crtcs, modes, n+1, width, height); + if (score > best_score) + { + best_crtc = crtc; + best_score = score; + memcpy (best_crtcs, crtcs, config->num_output * sizeof (xf86CrtcPtr)); + } + } + xfree (crtcs); + return best_score; +} + + +/* + * Compute the virtual size necessary to place all of the available + * crtcs in the specified configuration. + * + * canGrow indicates that the driver can make the screen larger than its initial + * configuration. If FALSE, this function will enlarge the screen to include + * the largest available mode. + */ + +static void +xf86DefaultScreenLimits (ScrnInfoPtr scrn, int *widthp, int *heightp, + Bool canGrow) +{ + xf86CrtcConfigPtr config = XF86_CRTC_CONFIG_PTR(scrn); + int width = 0, height = 0; + int o; + int c; + int s; + + for (c = 0; c < config->num_crtc; c++) + { + int crtc_width = 0, crtc_height = 0; + xf86CrtcPtr crtc = config->crtc[c]; + + if (crtc->enabled) + { + crtc_width = crtc->x + xf86ModeWidth (&crtc->desiredMode, crtc->desiredRotation); + crtc_height = crtc->y + xf86ModeHeight (&crtc->desiredMode, crtc->desiredRotation); + } + if (!canGrow) { + for (o = 0; o < config->num_output; o++) + { + xf86OutputPtr output = config->output[o]; + + for (s = 0; s < config->num_crtc; s++) + if (output->possible_crtcs & (1 << s)) + { + DisplayModePtr mode; + for (mode = output->probed_modes; mode; mode = mode->next) + { + if (mode->HDisplay > crtc_width) + crtc_width = mode->HDisplay; + if (mode->VDisplay > crtc_width) + crtc_width = mode->VDisplay; + if (mode->VDisplay > crtc_height) + crtc_height = mode->VDisplay; + if (mode->HDisplay > crtc_height) + crtc_height = mode->HDisplay; + } + } + } + } + if (crtc_width > width) + width = crtc_width; + if (crtc_height > height) + height = crtc_height; + } + if (config->maxWidth && width > config->maxWidth) width = config->maxWidth; + if (config->maxHeight && height > config->maxHeight) height = config->maxHeight; + if (config->minWidth && width < config->minWidth) width = config->minWidth; + if (config->minHeight && height < config->minHeight) height = config->minHeight; + *widthp = width; + *heightp = height; +} + +#define POSITION_UNSET -100000 + +/* + * check if the user configured any outputs at all + * with either a position or a relative setting or a mode. + */ +static Bool +xf86UserConfiguredOutputs(ScrnInfoPtr scrn, DisplayModePtr *modes) +{ + xf86CrtcConfigPtr config = XF86_CRTC_CONFIG_PTR(scrn); + int o; + Bool user_conf = FALSE; + + for (o = 0; o < config->num_output; o++) + { + xf86OutputPtr output = config->output[o]; + char *position; + char *relative_name; + OutputOpts relation; + int r; + static const OutputOpts relations[] = { + OPTION_BELOW, OPTION_RIGHT_OF, OPTION_ABOVE, OPTION_LEFT_OF + }; + + position = xf86GetOptValString (output->options, + OPTION_POSITION); + if (position) + user_conf = TRUE; + + relation = 0; + relative_name = NULL; + for (r = 0; r < 4; r++) + { + relation = relations[r]; + relative_name = xf86GetOptValString (output->options, + relation); + if (relative_name) + break; + } + if (relative_name) + user_conf = TRUE; + + modes[o] = xf86OutputHasUserPreferredMode(output); + if (modes[o]) + user_conf = TRUE; + } + + return user_conf; +} + +static Bool +xf86InitialOutputPositions (ScrnInfoPtr scrn, DisplayModePtr *modes) +{ + xf86CrtcConfigPtr config = XF86_CRTC_CONFIG_PTR(scrn); + int o; + int min_x, min_y; + + for (o = 0; o < config->num_output; o++) + { + xf86OutputPtr output = config->output[o]; + + output->initial_x = output->initial_y = POSITION_UNSET; + } + + /* + * Loop until all outputs are set + */ + for (;;) + { + Bool any_set = FALSE; + Bool keep_going = FALSE; + + for (o = 0; o < config->num_output; o++) + { + static const OutputOpts relations[] = { + OPTION_BELOW, OPTION_RIGHT_OF, OPTION_ABOVE, OPTION_LEFT_OF + }; + xf86OutputPtr output = config->output[o]; + xf86OutputPtr relative; + char *relative_name; + char *position; + OutputOpts relation; + int r; + + if (output->initial_x != POSITION_UNSET) + continue; + position = xf86GetOptValString (output->options, + OPTION_POSITION); + /* + * Absolute position wins + */ + if (position) + { + int x, y; + if (sscanf (position, "%d %d", &x, &y) == 2) + { + output->initial_x = x; + output->initial_y = y; + } + else + { + xf86DrvMsg (scrn->scrnIndex, X_ERROR, + "Output %s position not of form \"x y\"\n", + output->name); + output->initial_x = output->initial_y = 0; + } + any_set = TRUE; + continue; + } + /* + * Next comes relative positions + */ + relation = 0; + relative_name = NULL; + for (r = 0; r < 4; r++) + { + relation = relations[r]; + relative_name = xf86GetOptValString (output->options, + relation); + if (relative_name) + break; + } + if (relative_name) + { + int or; + relative = NULL; + for (or = 0; or < config->num_output; or++) + { + xf86OutputPtr out_rel = config->output[or]; + XF86ConfMonitorPtr rel_mon = out_rel->conf_monitor; + + if (rel_mon) + { + if (xf86nameCompare (rel_mon->mon_identifier, + relative_name) == 0) + { + relative = config->output[or]; + break; + } + } + if (strcmp (out_rel->name, relative_name) == 0) + { + relative = config->output[or]; + break; + } + } + if (!relative) + { + xf86DrvMsg (scrn->scrnIndex, X_ERROR, + "Cannot position output %s relative to unknown output %s\n", + output->name, relative_name); + output->initial_x = 0; + output->initial_y = 0; + any_set = TRUE; + continue; + } + if (!modes[or]) + { + xf86DrvMsg (scrn->scrnIndex, X_ERROR, + "Cannot position output %s relative to output %s without modes\n", + output->name, relative_name); + output->initial_x = 0; + output->initial_y = 0; + any_set = TRUE; + continue; + } + if (relative->initial_x == POSITION_UNSET) + { + keep_going = TRUE; + continue; + } + output->initial_x = relative->initial_x; + output->initial_y = relative->initial_y; + switch (relation) { + case OPTION_BELOW: + output->initial_y += xf86ModeHeight (modes[or], relative->initial_rotation); + break; + case OPTION_RIGHT_OF: + output->initial_x += xf86ModeWidth (modes[or], relative->initial_rotation); + break; + case OPTION_ABOVE: + output->initial_y -= xf86ModeHeight (modes[o], relative->initial_rotation); + break; + case OPTION_LEFT_OF: + output->initial_x -= xf86ModeWidth (modes[o], relative->initial_rotation); + break; + default: + break; + } + any_set = TRUE; + continue; + } + + /* Nothing set, just stick them at 0,0 */ + output->initial_x = 0; + output->initial_y = 0; + any_set = TRUE; + } + if (!keep_going) + break; + if (!any_set) + { + for (o = 0; o < config->num_output; o++) + { + xf86OutputPtr output = config->output[o]; + if (output->initial_x == POSITION_UNSET) + { + xf86DrvMsg (scrn->scrnIndex, X_ERROR, + "Output position loop. Moving %s to 0,0\n", + output->name); + output->initial_x = output->initial_y = 0; + break; + } + } + } + } + + /* + * normalize positions + */ + min_x = 1000000; + min_y = 1000000; + for (o = 0; o < config->num_output; o++) + { + xf86OutputPtr output = config->output[o]; + + if (output->initial_x < min_x) + min_x = output->initial_x; + if (output->initial_y < min_y) + min_y = output->initial_y; + } + + for (o = 0; o < config->num_output; o++) + { + xf86OutputPtr output = config->output[o]; + + output->initial_x -= min_x; + output->initial_y -= min_y; + } + return TRUE; +} + +/* + * XXX walk the monitor mode list and prune out duplicates that + * are inserted by xf86DDCMonitorSet. In an ideal world, that + * function would do this work by itself. + */ + +static void +xf86PruneDuplicateMonitorModes (MonPtr Monitor) +{ + DisplayModePtr master, clone, next; + + for (master = Monitor->Modes; + master && master != Monitor->Last; + master = master->next) + { + for (clone = master->next; clone && clone != Monitor->Modes; clone = next) + { + next = clone->next; + if (xf86ModesEqual (master, clone)) + { + if (Monitor->Last == clone) + Monitor->Last = clone->prev; + xf86DeleteMode (&Monitor->Modes, clone); + } + } + } +} + +/** Return - 0 + if a should be earlier, same or later than b in list + */ +static int +xf86ModeCompare (DisplayModePtr a, DisplayModePtr b) +{ + int diff; + + diff = ((b->type & M_T_PREFERRED) != 0) - ((a->type & M_T_PREFERRED) != 0); + if (diff) + return diff; + diff = b->HDisplay * b->VDisplay - a->HDisplay * a->VDisplay; + if (diff) + return diff; + diff = b->Clock - a->Clock; + return diff; +} + +/** + * Insertion sort input in-place and return the resulting head + */ +static DisplayModePtr +xf86SortModes (DisplayModePtr input) +{ + DisplayModePtr output = NULL, i, o, n, *op, prev; + + /* sort by preferred status and pixel area */ + while (input) + { + i = input; + input = input->next; + for (op = &output; (o = *op); op = &o->next) + if (xf86ModeCompare (o, i) > 0) + break; + i->next = *op; + *op = i; + } + /* prune identical modes */ + for (o = output; o && (n = o->next); o = n) + { + if (!strcmp (o->name, n->name) && xf86ModesEqual (o, n)) + { + o->next = n->next; + xfree (n->name); + xfree (n); + n = o; + } + } + /* hook up backward links */ + prev = NULL; + for (o = output; o; o = o->next) + { + o->prev = prev; + prev = o; + } + return output; +} + +static char * +preferredMode(ScrnInfoPtr pScrn, xf86OutputPtr output) +{ + char *preferred_mode = NULL; + + /* Check for a configured preference for a particular mode */ + preferred_mode = xf86GetOptValString (output->options, + OPTION_PREFERRED_MODE); + if (preferred_mode) + return preferred_mode; + + if (pScrn->display->modes && *pScrn->display->modes) + preferred_mode = *pScrn->display->modes; + + return preferred_mode; +} + +static void +GuessRangeFromModes(MonPtr mon, DisplayModePtr mode) +{ + if (!mon || !mode) + return; + + mon->nHsync = 1; + mon->hsync[0].lo = 1024.0; + mon->hsync[0].hi = 0.0; + + mon->nVrefresh = 1; + mon->vrefresh[0].lo = 1024.0; + mon->vrefresh[0].hi = 0.0; + + while (mode) { + if (!mode->HSync) + mode->HSync = ((float) mode->Clock ) / ((float) mode->HTotal); + + if (!mode->VRefresh) + mode->VRefresh = (1000.0 * ((float) mode->Clock)) / + ((float) (mode->HTotal * mode->VTotal)); + + if (mode->HSync < mon->hsync[0].lo) + mon->hsync[0].lo = mode->HSync; + + if (mode->HSync > mon->hsync[0].hi) + mon->hsync[0].hi = mode->HSync; + + if (mode->VRefresh < mon->vrefresh[0].lo) + mon->vrefresh[0].lo = mode->VRefresh; + + if (mode->VRefresh > mon->vrefresh[0].hi) + mon->vrefresh[0].hi = mode->VRefresh; + + mode = mode->next; + } + + /* stretch out the bottom to fit 640x480@60 */ + if (mon->hsync[0].lo > 31.0) + mon->hsync[0].lo = 31.0; + if (mon->vrefresh[0].lo > 58.0) + mon->vrefresh[0].lo = 58.0; +} + +_X_EXPORT void +xf86ProbeOutputModes (ScrnInfoPtr scrn, int maxX, int maxY) +{ + xf86CrtcConfigPtr config = XF86_CRTC_CONFIG_PTR(scrn); + int o; + + /* When canGrow was TRUE in the initial configuration we have to + * compare against the maximum values so that we don't drop modes. + * When canGrow was FALSE, the maximum values would have been clamped + * anyway. + */ + if (maxX == 0 || maxY == 0) { + maxX = config->maxWidth; + maxY = config->maxHeight; + } + + /* Elide duplicate modes before defaulting code uses them */ + xf86PruneDuplicateMonitorModes (scrn->monitor); + + /* Probe the list of modes for each output. */ + for (o = 0; o < config->num_output; o++) + { + xf86OutputPtr output = config->output[o]; + DisplayModePtr mode; + DisplayModePtr config_modes = NULL, output_modes, default_modes; + char *preferred_mode; + xf86MonPtr edid_monitor; + XF86ConfMonitorPtr conf_monitor; + MonRec mon_rec; + int min_clock = 0; + int max_clock = 0; + double clock; + enum { sync_config, sync_edid, sync_default } sync_source = sync_default; + + while (output->probed_modes != NULL) + xf86DeleteMode(&output->probed_modes, output->probed_modes); + + /* + * Check connection status + */ + output->status = (*output->funcs->detect)(output); + + if (output->status == XF86OutputStatusDisconnected) + { + xf86OutputSetEDID (output, NULL); + continue; + } + + memset (&mon_rec, '\0', sizeof (mon_rec)); + + conf_monitor = output->conf_monitor; + + if (conf_monitor) + { + int i; + + for (i = 0; i < conf_monitor->mon_n_hsync; i++) + { + mon_rec.hsync[mon_rec.nHsync].lo = conf_monitor->mon_hsync[i].lo; + mon_rec.hsync[mon_rec.nHsync].hi = conf_monitor->mon_hsync[i].hi; + mon_rec.nHsync++; + sync_source = sync_config; + } + for (i = 0; i < conf_monitor->mon_n_vrefresh; i++) + { + mon_rec.vrefresh[mon_rec.nVrefresh].lo = conf_monitor->mon_vrefresh[i].lo; + mon_rec.vrefresh[mon_rec.nVrefresh].hi = conf_monitor->mon_vrefresh[i].hi; + mon_rec.nVrefresh++; + sync_source = sync_config; + } + config_modes = xf86GetMonitorModes (scrn, conf_monitor); + } + + output_modes = (*output->funcs->get_modes) (output); + + edid_monitor = output->MonInfo; + + if (edid_monitor) + { + int i; + Bool set_hsync = mon_rec.nHsync == 0; + Bool set_vrefresh = mon_rec.nVrefresh == 0; + + for (i = 0; i < sizeof (edid_monitor->det_mon) / sizeof (edid_monitor->det_mon[0]); i++) + { + if (edid_monitor->det_mon[i].type == DS_RANGES) + { + struct monitor_ranges *ranges = &edid_monitor->det_mon[i].section.ranges; + if (set_hsync && ranges->max_h) + { + mon_rec.hsync[mon_rec.nHsync].lo = ranges->min_h; + mon_rec.hsync[mon_rec.nHsync].hi = ranges->max_h; + mon_rec.nHsync++; + if (sync_source == sync_default) + sync_source = sync_edid; + } + if (set_vrefresh && ranges->max_v) + { + mon_rec.vrefresh[mon_rec.nVrefresh].lo = ranges->min_v; + mon_rec.vrefresh[mon_rec.nVrefresh].hi = ranges->max_v; + mon_rec.nVrefresh++; + if (sync_source == sync_default) + sync_source = sync_edid; + } + if (ranges->max_clock * 1000 > max_clock) + max_clock = ranges->max_clock * 1000; + } + } + } + + if (xf86GetOptValFreq (output->options, OPTION_MIN_CLOCK, + OPTUNITS_KHZ, &clock)) + min_clock = (int) clock; + if (xf86GetOptValFreq (output->options, OPTION_MAX_CLOCK, + OPTUNITS_KHZ, &clock)) + max_clock = (int) clock; + + /* If we still don't have a sync range, guess wildly */ + if (!mon_rec.nHsync || !mon_rec.nVrefresh) + GuessRangeFromModes(&mon_rec, output_modes); + + /* + * These limits will end up setting a 1024x768@60Hz mode by default, + * which seems like a fairly good mode to use when nothing else is + * specified + */ + if (mon_rec.nHsync == 0) + { + mon_rec.hsync[0].lo = 31.0; + mon_rec.hsync[0].hi = 55.0; + mon_rec.nHsync = 1; + } + if (mon_rec.nVrefresh == 0) + { + mon_rec.vrefresh[0].lo = 58.0; + mon_rec.vrefresh[0].hi = 62.0; + mon_rec.nVrefresh = 1; + } + default_modes = xf86GetDefaultModes (output->interlaceAllowed, + output->doubleScanAllowed); + + /* + * If this is not an RB monitor, remove RB modes from the default + * pool. RB modes from the config or the monitor itself are fine. + */ + if (!mon_rec.reducedblanking) + xf86ValidateModesReducedBlanking (scrn, default_modes); + + if (sync_source == sync_config) + { + /* + * Check output and config modes against sync range from config file + */ + xf86ValidateModesSync (scrn, output_modes, &mon_rec); + xf86ValidateModesSync (scrn, config_modes, &mon_rec); + } + /* + * Check default modes against sync range + */ + xf86ValidateModesSync (scrn, default_modes, &mon_rec); + /* + * Check default modes against monitor max clock + */ + if (max_clock) { + xf86ValidateModesClocks(scrn, default_modes, + &min_clock, &max_clock, 1); + xf86ValidateModesClocks(scrn, output_modes, + &min_clock, &max_clock, 1); + } + + output->probed_modes = NULL; + output->probed_modes = xf86ModesAdd (output->probed_modes, config_modes); + output->probed_modes = xf86ModesAdd (output->probed_modes, output_modes); + output->probed_modes = xf86ModesAdd (output->probed_modes, default_modes); + + /* + * Check all modes against max size + */ + if (maxX && maxY) + xf86ValidateModesSize (scrn, output->probed_modes, + maxX, maxY, 0); + + /* + * Check all modes against output + */ + for (mode = output->probed_modes; mode != NULL; mode = mode->next) + if (mode->status == MODE_OK) + mode->status = (*output->funcs->mode_valid)(output, mode); + + xf86PruneInvalidModes(scrn, &output->probed_modes, + config->debug_modes); + + output->probed_modes = xf86SortModes (output->probed_modes); + + /* Check for a configured preference for a particular mode */ + preferred_mode = preferredMode(scrn, output); + + if (preferred_mode) + { + for (mode = output->probed_modes; mode; mode = mode->next) + { + if (!strcmp (preferred_mode, mode->name)) + { + if (mode != output->probed_modes) + { + if (mode->prev) + mode->prev->next = mode->next; + if (mode->next) + mode->next->prev = mode->prev; + mode->next = output->probed_modes; + output->probed_modes->prev = mode; + mode->prev = NULL; + output->probed_modes = mode; + } + mode->type |= (M_T_PREFERRED|M_T_USERPREF); + break; + } + } + } + + output->initial_rotation = xf86OutputInitialRotation (output); + + if (config->debug_modes) { + if (output->probed_modes != NULL) { + xf86DrvMsg(scrn->scrnIndex, X_INFO, + "Printing probed modes for output %s\n", + output->name); + } else { + xf86DrvMsg(scrn->scrnIndex, X_INFO, + "No remaining probed modes for output %s\n", + output->name); + } + } + for (mode = output->probed_modes; mode != NULL; mode = mode->next) + { + /* The code to choose the best mode per pipe later on will require + * VRefresh to be set. + */ + mode->VRefresh = xf86ModeVRefresh(mode); + xf86SetModeCrtc(mode, INTERLACE_HALVE_V); + + if (config->debug_modes) + xf86PrintModeline(scrn->scrnIndex, mode); + } + } +} + + +/** + * Copy one of the output mode lists to the ScrnInfo record + */ + +/* XXX where does this function belong? Here? */ +_X_EXPORT void +xf86RandR12GetOriginalVirtualSize(ScrnInfoPtr scrn, int *x, int *y); + +static DisplayModePtr +biggestMode(DisplayModePtr a, DisplayModePtr b) +{ + int A, B; + + if (!a) + return b; + if (!b) + return a; + + A = a->HDisplay * a->VDisplay; + B = b->HDisplay * b->VDisplay; + + if (A > B) + return a; + + return b; +} + +static xf86OutputPtr +SetCompatOutput(xf86CrtcConfigPtr config) +{ + xf86OutputPtr output = NULL, test = NULL; + DisplayModePtr maxmode = NULL, testmode, mode; + int o, compat = -1, count, mincount = 0; + + /* Look for one that's definitely connected */ + for (o = 0; o < config->num_output; o++) + { + test = config->output[o]; + if (!test->crtc) + continue; + if (test->status != XF86OutputStatusConnected) + continue; + if (!test->probed_modes) + continue; + + testmode = mode = test->probed_modes; + for (count = 0; mode; mode = mode->next, count++) + testmode = biggestMode(testmode, mode); + + if (!output) { + output = test; + compat = o; + maxmode = testmode; + mincount = count; + } else if (maxmode == biggestMode(maxmode, testmode)) { + output = test; + compat = o; + maxmode = testmode; + mincount = count; + } else if ((maxmode->HDisplay == testmode->HDisplay) && + (maxmode->VDisplay == testmode->VDisplay) && + count <= mincount) { + output = test; + compat = o; + maxmode = testmode; + mincount = count; + } + } + + /* If we didn't find one, take anything we can get */ + if (!output) + { + for (o = 0; o < config->num_output; o++) + { + test = config->output[o]; + if (!test->crtc) + continue; + if (!test->probed_modes) + continue; + + if (!output) { + output = test; + compat = o; + } else if (test->probed_modes->HDisplay < output->probed_modes->HDisplay) { + output = test; + compat = o; + } + } + } + + if (compat >= 0) { + config->compat_output = compat; + } else { + /* Don't change the compat output when no valid outputs found */ + output = config->output[config->compat_output]; + } + + return output; +} + +_X_EXPORT void +xf86SetScrnInfoModes (ScrnInfoPtr scrn) +{ + xf86CrtcConfigPtr config = XF86_CRTC_CONFIG_PTR(scrn); + xf86OutputPtr output; + xf86CrtcPtr crtc; + DisplayModePtr last, mode = NULL; + + output = SetCompatOutput(config); + + if (!output) + return; /* punt */ + + crtc = output->crtc; + + /* Clear any existing modes from scrn->modes */ + while (scrn->modes != NULL) + xf86DeleteMode(&scrn->modes, scrn->modes); + + /* Set scrn->modes to the mode list for the 'compat' output */ + scrn->modes = xf86DuplicateModes(scrn, output->probed_modes); + + if (crtc) { + for (mode = scrn->modes; mode; mode = mode->next) + if (xf86ModesEqual (mode, &crtc->desiredMode)) + break; + } + + if (scrn->modes != NULL) { + /* For some reason, scrn->modes is circular, unlike the other mode + * lists. How great is that? + */ + for (last = scrn->modes; last && last->next; last = last->next) + ; + last->next = scrn->modes; + scrn->modes->prev = last; + if (mode) { + while (scrn->modes != mode) + scrn->modes = scrn->modes->next; + } + } + scrn->currentMode = scrn->modes; +} + +static void +xf86EnableOutputs(ScrnInfoPtr scrn, xf86CrtcConfigPtr config, Bool *enabled) +{ + Bool any_enabled = FALSE; + int o; + + for (o = 0; o < config->num_output; o++) + any_enabled |= enabled[o] = xf86OutputEnabled(config->output[o], TRUE); + + if (!any_enabled) { + xf86DrvMsg(scrn->scrnIndex, X_WARNING, + "No outputs definitely connected, trying again...\n"); + + for (o = 0; o < config->num_output; o++) + enabled[o] = xf86OutputEnabled(config->output[o], FALSE); + } +} + +static Bool +nextEnabledOutput(xf86CrtcConfigPtr config, Bool *enabled, int *index) +{ + int o = *index; + + for (o++; o < config->num_output; o++) { + if (enabled[o]) { + *index = o; + return TRUE; + } + } + + return FALSE; +} + +static Bool +xf86TargetPreferred(ScrnInfoPtr scrn, xf86CrtcConfigPtr config, + DisplayModePtr *modes, Bool *enabled, + int width, int height) +{ + int o, p; + int max_pref_width = 0, max_pref_height = 0; + DisplayModePtr *preferred, *preferred_match; + Bool ret = FALSE; + + preferred = xnfcalloc(config->num_output, sizeof(DisplayModePtr)); + preferred_match = xnfcalloc(config->num_output, sizeof(DisplayModePtr)); + + /* Check if the preferred mode is available on all outputs */ + for (p = -1; nextEnabledOutput(config, enabled, &p); ) { + Rotation r = config->output[p]->initial_rotation; + DisplayModePtr mode; + if ((preferred[p] = xf86OutputHasPreferredMode(config->output[p], + width, height))) { + int pref_width = xf86ModeWidth(preferred[p], r); + int pref_height = xf86ModeHeight(preferred[p], r); + Bool all_match = TRUE; + + for (o = -1; nextEnabledOutput(config, enabled, &o); ) { + Bool match = FALSE; + xf86OutputPtr output = config->output[o]; + if (o == p) + continue; + + for (mode = output->probed_modes; mode; mode = mode->next) { + Rotation r = output->initial_rotation; + if (xf86ModeWidth(mode, r) == pref_width && + xf86ModeHeight(mode, r) == pref_height) { + preferred[o] = mode; + match = TRUE; + } + } + + all_match &= match; + } + + if (all_match && + (pref_width*pref_height > max_pref_width*max_pref_height)) { + for (o = -1; nextEnabledOutput(config, enabled, &o); ) + preferred_match[o] = preferred[o]; + max_pref_width = pref_width; + max_pref_height = pref_height; + ret = TRUE; + } + } + } + + if (ret) { + /* oh good, there is a match. stash the selected modes and return. */ + memcpy(modes, preferred_match, + config->num_output * sizeof(DisplayModePtr)); + } + + xfree(preferred); + xfree(preferred_match); + return ret; +} + +static Bool +aspectMatch(float a, float b) +{ + return fabs(1 - (a / b)) < 0.05; +} + +static DisplayModePtr +nextAspectMode(xf86OutputPtr o, DisplayModePtr last, float aspect) +{ + DisplayModePtr m = NULL; + + if (!o) + return NULL; + + if (!last) + m = o->probed_modes; + else + m = last->next; + + for (; m; m = m->next) + if (aspectMatch(aspect, (float)m->HDisplay / (float)m->VDisplay)) + return m; + + return NULL; +} + +static DisplayModePtr +bestModeForAspect(xf86CrtcConfigPtr config, Bool *enabled, float aspect) +{ + int o = -1, p; + DisplayModePtr mode = NULL, test = NULL, match = NULL; + + if (!nextEnabledOutput(config, enabled, &o)) + return NULL; + while ((mode = nextAspectMode(config->output[o], mode, aspect))) { + test = mode; + for (p = o; nextEnabledOutput(config, enabled, &p); ) { + test = xf86OutputFindClosestMode(config->output[p], mode); + if (!test) + break; + if (test->HDisplay != mode->HDisplay || + test->VDisplay != mode->VDisplay) { + test = NULL; + break; + } + } + + /* if we didn't match it on all outputs, try the next one */ + if (!test) + continue; + + /* if it's bigger than the last one, save it */ + if (!match || (test->HDisplay > match->HDisplay)) + match = test; + } + + /* return the biggest one found */ + return match; +} + +static Bool +xf86TargetAspect(ScrnInfoPtr scrn, xf86CrtcConfigPtr config, + DisplayModePtr *modes, Bool *enabled, + int width, int height) +{ + int o; + float aspect = 0.0, *aspects; + xf86OutputPtr output; + Bool ret = FALSE; + DisplayModePtr guess = NULL, aspect_guess = NULL, base_guess = NULL; + + aspects = xnfcalloc(config->num_output, sizeof(float)); + + /* collect the aspect ratios */ + for (o = -1; nextEnabledOutput(config, enabled, &o); ) { + output = config->output[o]; + if (output->mm_height) + aspects[o] = (float)output->mm_width / (float)output->mm_height; + else + aspects[o] = 4.0 / 3.0; + } + + /* check that they're all the same */ + for (o = -1; nextEnabledOutput(config, enabled, &o); ) { + output = config->output[o]; + if (!aspect) { + aspect = aspects[o]; + } else if (!aspectMatch(aspect, aspects[o])) { + goto no_aspect_match; + } + } + + /* if they're all 4:3, just skip ahead and save effort */ + if (!aspectMatch(aspect, 4.0/3.0)) + aspect_guess = bestModeForAspect(config, enabled, aspect); + +no_aspect_match: + base_guess = bestModeForAspect(config, enabled, 4.0/3.0); + + guess = biggestMode(base_guess, aspect_guess); + + if (!guess) + goto out; + + /* found a mode that works everywhere, now apply it */ + for (o = -1; nextEnabledOutput(config, enabled, &o); ) { + modes[o] = xf86OutputFindClosestMode(config->output[o], guess); + } + ret = TRUE; + +out: + xfree(aspects); + return ret; +} + +static Bool +xf86TargetFallback(ScrnInfoPtr scrn, xf86CrtcConfigPtr config, + DisplayModePtr *modes, Bool *enabled, + int width, int height) +{ + DisplayModePtr target_mode = NULL; + Rotation target_rotation = RR_Rotate_0; + DisplayModePtr default_mode; + int default_preferred, target_preferred = 0, o; + + /* User preferred > preferred > other modes */ + for (o = -1; nextEnabledOutput(config, enabled, &o); ) { + default_mode = xf86DefaultMode (config->output[o], width, height); + if (!default_mode) + continue; + + default_preferred = (((default_mode->type & M_T_PREFERRED) != 0) + + ((default_mode->type & M_T_USERPREF) != 0)); + + if (default_preferred > target_preferred || !target_mode) { + target_mode = default_mode; + target_preferred = default_preferred; + target_rotation = config->output[o]->initial_rotation; + config->compat_output = o; + } + } + + if (target_mode) + modes[config->compat_output] = target_mode; + + /* Fill in other output modes */ + for (o = -1; nextEnabledOutput(config, enabled, &o); ) { + if (!modes[o]) + modes[o] = xf86ClosestMode(config->output[o], target_mode, + target_rotation, width, height); + } + + return (target_mode != NULL); +} + +static Bool +xf86TargetUserpref(ScrnInfoPtr scrn, xf86CrtcConfigPtr config, + DisplayModePtr *modes, Bool *enabled, + int width, int height) +{ + int o; + + if (xf86UserConfiguredOutputs(scrn, modes)) + return xf86TargetFallback(scrn, config, modes, enabled, width, height); + + for (o = -1; nextEnabledOutput(config, enabled, &o); ) + if (xf86OutputHasUserPreferredMode(config->output[o])) + return + xf86TargetFallback(scrn, config, modes, enabled, width, height); + + return FALSE; +} + + +/** + * Construct default screen configuration + * + * Given auto-detected (and, eventually, configured) values, + * construct a usable configuration for the system + * + * canGrow indicates that the driver can resize the screen to larger than its + * initially configured size via the config->funcs->resize hook. If TRUE, this + * function will set virtualX and virtualY to match the initial configuration + * and leave config->max{Width,Height} alone. If FALSE, it will bloat + * virtual[XY] to include the largest modes and set config->max{Width,Height} + * accordingly. + */ + +_X_EXPORT Bool +xf86InitialConfiguration (ScrnInfoPtr scrn, Bool canGrow) +{ + xf86CrtcConfigPtr config = XF86_CRTC_CONFIG_PTR(scrn); + int o, c; + xf86CrtcPtr *crtcs; + DisplayModePtr *modes; + Bool *enabled; + int width, height; + int i = scrn->scrnIndex; + + /* Set up the device options */ + config->options = xnfalloc (sizeof (xf86DeviceOptions)); + memcpy (config->options, xf86DeviceOptions, sizeof (xf86DeviceOptions)); + xf86ProcessOptions (scrn->scrnIndex, + scrn->options, + config->options); + config->debug_modes = xf86ReturnOptValBool (config->options, + OPTION_MODEDEBUG, FALSE); + + if (scrn->display->virtualX) + width = scrn->display->virtualX; + else + width = config->maxWidth; + if (scrn->display->virtualY) + height = scrn->display->virtualY; + else + height = config->maxHeight; + + xf86ProbeOutputModes (scrn, width, height); + + crtcs = xnfcalloc (config->num_output, sizeof (xf86CrtcPtr)); + modes = xnfcalloc (config->num_output, sizeof (DisplayModePtr)); + enabled = xnfcalloc (config->num_output, sizeof (Bool)); + + xf86EnableOutputs(scrn, config, enabled); + + if (xf86TargetUserpref(scrn, config, modes, enabled, width, height)) + xf86DrvMsg(i, X_INFO, "Using user preference for initial modes\n"); + else if (xf86TargetPreferred(scrn, config, modes, enabled, width, height)) + xf86DrvMsg(i, X_INFO, "Using exact sizes for initial modes\n"); + else if (xf86TargetAspect(scrn, config, modes, enabled, width, height)) + xf86DrvMsg(i, X_INFO, "Using fuzzy aspect match for initial modes\n"); + else if (xf86TargetFallback(scrn, config, modes, enabled, width, height)) + xf86DrvMsg(i, X_INFO, "Using sloppy heuristic for initial modes\n"); + else + xf86DrvMsg(i, X_WARNING, "Unable to find initial modes\n"); + + for (o = -1; nextEnabledOutput(config, enabled, &o); ) { + if (!modes[o]) + xf86DrvMsg (scrn->scrnIndex, X_ERROR, + "Output %s enabled but has no modes\n", + config->output[o]->name); + else + xf86DrvMsg (scrn->scrnIndex, X_INFO, + "Output %s using initial mode %s\n", + config->output[o]->name, modes[o]->name); + } + + /* + * Set the position of each output + */ + if (!xf86InitialOutputPositions (scrn, modes)) + { + xfree (crtcs); + xfree (modes); + return FALSE; + } + + /* + * Assign CRTCs to fit output configuration + */ + if (!xf86PickCrtcs (scrn, crtcs, modes, 0, width, height)) + { + xfree (crtcs); + xfree (modes); + return FALSE; + } + + /* XXX override xf86 common frame computation code */ + + scrn->display->frameX0 = 0; + scrn->display->frameY0 = 0; + + for (c = 0; c < config->num_crtc; c++) + { + xf86CrtcPtr crtc = config->crtc[c]; + + crtc->enabled = FALSE; + memset (&crtc->desiredMode, '\0', sizeof (crtc->desiredMode)); + } + + /* + * Set initial configuration + */ + for (o = 0; o < config->num_output; o++) + { + xf86OutputPtr output = config->output[o]; + DisplayModePtr mode = modes[o]; + xf86CrtcPtr crtc = crtcs[o]; + + if (mode && crtc) + { + crtc->desiredMode = *mode; + crtc->desiredRotation = output->initial_rotation; + crtc->desiredX = output->initial_x; + crtc->desiredY = output->initial_y; + crtc->enabled = TRUE; + crtc->x = output->initial_x; + crtc->y = output->initial_y; + output->crtc = crtc; + } else { + output->crtc = NULL; + } + } + + if (scrn->display->virtualX == 0) + { + /* + * Expand virtual size to cover the current config and potential mode + * switches, if the driver can't enlarge the screen later. + */ + xf86DefaultScreenLimits (scrn, &width, &height, canGrow); + + scrn->display->virtualX = width; + scrn->display->virtualY = height; + } + + if (width > scrn->virtualX) + scrn->virtualX = width; + if (height > scrn->virtualY) + scrn->virtualY = height; + + /* + * Make sure the configuration isn't too small. + */ + if (width < config->minWidth || height < config->minHeight) + return FALSE; + + /* + * Limit the crtc config to virtual[XY] if the driver can't grow the + * desktop. + */ + if (!canGrow) + { + xf86CrtcSetSizeRange (scrn, config->minWidth, config->minHeight, + width, height); + } + + /* Mirror output modes to scrn mode list */ + xf86SetScrnInfoModes (scrn); + + xfree (crtcs); + xfree (modes); + return TRUE; +} + +/* + * Using the desired mode information in each crtc, set + * modes (used in EnterVT functions, or at server startup) + */ + +_X_EXPORT Bool +xf86SetDesiredModes (ScrnInfoPtr scrn) +{ + xf86CrtcConfigPtr config = XF86_CRTC_CONFIG_PTR(scrn); + int c, o; + + /* + * Turn off everything so mode setting is done + * with hardware in a consistent state + */ + for (o = 0; o < config->num_output; o++) + { + xf86OutputPtr output = config->output[o]; + (*output->funcs->dpms)(output, DPMSModeOff); + } + + for (c = 0; c < config->num_crtc; c++) + { + xf86CrtcPtr crtc = config->crtc[c]; + + crtc->funcs->dpms(crtc, DPMSModeOff); + memset(&crtc->mode, 0, sizeof(crtc->mode)); + } + + for (c = 0; c < config->num_crtc; c++) + { + xf86CrtcPtr crtc = config->crtc[c]; + xf86OutputPtr output = NULL; + int o; + + /* Skip disabled CRTCs */ + if (!crtc->enabled) + continue; + + if (config->output[config->compat_output]->crtc == crtc) + output = config->output[config->compat_output]; + else + { + for (o = 0; o < config->num_output; o++) + if (config->output[o]->crtc == crtc) + { + output = config->output[o]; + break; + } + } + /* paranoia */ + if (!output) + continue; + + /* Mark that we'll need to re-set the mode for sure */ + memset(&crtc->mode, 0, sizeof(crtc->mode)); + if (!crtc->desiredMode.CrtcHDisplay) + { + DisplayModePtr mode = xf86OutputFindClosestMode (output, scrn->currentMode); + + if (!mode) + return FALSE; + crtc->desiredMode = *mode; + crtc->desiredRotation = RR_Rotate_0; + crtc->desiredX = 0; + crtc->desiredY = 0; + } + + if (!xf86CrtcSetMode (crtc, &crtc->desiredMode, crtc->desiredRotation, + crtc->desiredX, crtc->desiredY)) + return FALSE; + } + + xf86DisableUnusedFunctions(scrn); + return TRUE; +} + +/** + * In the current world order, there are lists of modes per output, which may + * or may not include the mode that was asked to be set by XFree86's mode + * selection. Find the closest one, in the following preference order: + * + * - Equality + * - Closer in size to the requested mode, but no larger + * - Closer in refresh rate to the requested mode. + */ + +_X_EXPORT DisplayModePtr +xf86OutputFindClosestMode (xf86OutputPtr output, DisplayModePtr desired) +{ + DisplayModePtr best = NULL, scan = NULL; + + for (scan = output->probed_modes; scan != NULL; scan = scan->next) + { + /* If there's an exact match, we're done. */ + if (xf86ModesEqual(scan, desired)) { + best = desired; + break; + } + + /* Reject if it's larger than the desired mode. */ + if (scan->HDisplay > desired->HDisplay || + scan->VDisplay > desired->VDisplay) + { + continue; + } + + /* + * If we haven't picked a best mode yet, use the first + * one in the size range + */ + if (best == NULL) + { + best = scan; + continue; + } + + /* Find if it's closer to the right size than the current best + * option. + */ + if ((scan->HDisplay > best->HDisplay && + scan->VDisplay >= best->VDisplay) || + (scan->HDisplay >= best->HDisplay && + scan->VDisplay > best->VDisplay)) + { + best = scan; + continue; + } + + /* Find if it's still closer to the right refresh than the current + * best resolution. + */ + if (scan->HDisplay == best->HDisplay && + scan->VDisplay == best->VDisplay && + (fabs(scan->VRefresh - desired->VRefresh) < + fabs(best->VRefresh - desired->VRefresh))) { + best = scan; + } + } + return best; +} + +/** + * When setting a mode through XFree86-VidModeExtension or XFree86-DGA, + * take the specified mode and apply it to the crtc connected to the compat + * output. Then, find similar modes for the other outputs, as with the + * InitialConfiguration code above. The goal is to clone the desired + * mode across all outputs that are currently active. + */ + +_X_EXPORT Bool +xf86SetSingleMode (ScrnInfoPtr pScrn, DisplayModePtr desired, Rotation rotation) +{ + xf86CrtcConfigPtr config = XF86_CRTC_CONFIG_PTR(pScrn); + Bool ok = TRUE; + xf86OutputPtr compat_output = config->output[config->compat_output]; + DisplayModePtr compat_mode; + int c; + + /* + * Let the compat output drive the final mode selection + */ + compat_mode = xf86OutputFindClosestMode (compat_output, desired); + if (compat_mode) + desired = compat_mode; + + for (c = 0; c < config->num_crtc; c++) + { + xf86CrtcPtr crtc = config->crtc[c]; + DisplayModePtr crtc_mode = NULL; + int o; + + if (!crtc->enabled) + continue; + + for (o = 0; o < config->num_output; o++) + { + xf86OutputPtr output = config->output[o]; + DisplayModePtr output_mode; + + /* skip outputs not on this crtc */ + if (output->crtc != crtc) + continue; + + if (crtc_mode) + { + output_mode = xf86OutputFindClosestMode (output, crtc_mode); + if (output_mode != crtc_mode) + output->crtc = NULL; + } + else + crtc_mode = xf86OutputFindClosestMode (output, desired); + } + if (!crtc_mode) + { + crtc->enabled = FALSE; + continue; + } + if (!xf86CrtcSetMode (crtc, crtc_mode, rotation, 0, 0)) + ok = FALSE; + else + { + crtc->desiredMode = *crtc_mode; + crtc->desiredRotation = rotation; + crtc->desiredX = 0; + crtc->desiredY = 0; + } + } + xf86DisableUnusedFunctions(pScrn); +#if RANDR_12_INTERFACE + xf86RandR12TellChanged (pScrn->pScreen); +#endif + return ok; +} + + +/** + * Set the DPMS power mode of all outputs and CRTCs. + * + * If the new mode is off, it will turn off outputs and then CRTCs. + * Otherwise, it will affect CRTCs before outputs. + */ +_X_EXPORT void +xf86DPMSSet(ScrnInfoPtr scrn, int mode, int flags) +{ + xf86CrtcConfigPtr config = XF86_CRTC_CONFIG_PTR(scrn); + int i; + + if (!scrn->vtSema) + return; + + if (mode == DPMSModeOff) { + for (i = 0; i < config->num_output; i++) { + xf86OutputPtr output = config->output[i]; + if (output->crtc != NULL) + (*output->funcs->dpms) (output, mode); + } + } + + for (i = 0; i < config->num_crtc; i++) { + xf86CrtcPtr crtc = config->crtc[i]; + if (crtc->enabled) + (*crtc->funcs->dpms) (crtc, mode); + } + + if (mode != DPMSModeOff) { + for (i = 0; i < config->num_output; i++) { + xf86OutputPtr output = config->output[i]; + if (output->crtc != NULL) + (*output->funcs->dpms) (output, mode); + } + } +} + +/** + * Implement the screensaver by just calling down into the driver DPMS hooks. + * + * Even for monitors with no DPMS support, by the definition of our DPMS hooks, + * the outputs will still get disabled (blanked). + */ +_X_EXPORT Bool +xf86SaveScreen(ScreenPtr pScreen, int mode) +{ + ScrnInfoPtr pScrn = xf86Screens[pScreen->myNum]; + + if (xf86IsUnblank(mode)) + xf86DPMSSet(pScrn, DPMSModeOn, 0); + else + xf86DPMSSet(pScrn, DPMSModeOff, 0); + + return TRUE; +} + +/** + * Disable all inactive crtcs and outputs + */ +_X_EXPORT void +xf86DisableUnusedFunctions(ScrnInfoPtr pScrn) +{ + xf86CrtcConfigPtr xf86_config = XF86_CRTC_CONFIG_PTR(pScrn); + int o, c; + + for (o = 0; o < xf86_config->num_output; o++) + { + xf86OutputPtr output = xf86_config->output[o]; + if (!output->crtc) + (*output->funcs->dpms)(output, DPMSModeOff); + } + + for (c = 0; c < xf86_config->num_crtc; c++) + { + xf86CrtcPtr crtc = xf86_config->crtc[c]; + + if (!crtc->enabled) + { + crtc->funcs->dpms(crtc, DPMSModeOff); + memset(&crtc->mode, 0, sizeof(crtc->mode)); + } + } +} + +#ifdef RANDR_12_INTERFACE + +#define EDID_ATOM_NAME "EDID_DATA" + +/** + * Set the RandR EDID property + */ +static void +xf86OutputSetEDIDProperty (xf86OutputPtr output, void *data, int data_len) +{ + Atom edid_atom = MakeAtom(EDID_ATOM_NAME, sizeof(EDID_ATOM_NAME) - 1, TRUE); + + /* This may get called before the RandR resources have been created */ + if (output->randr_output == NULL) + return; + + if (data_len != 0) { + RRChangeOutputProperty(output->randr_output, edid_atom, XA_INTEGER, 8, + PropModeReplace, data_len, data, FALSE, TRUE); + } else { + RRDeleteOutputProperty(output->randr_output, edid_atom); + } +} + +#endif + +/** + * Set the EDID information for the specified output + */ +_X_EXPORT void +xf86OutputSetEDID (xf86OutputPtr output, xf86MonPtr edid_mon) +{ + ScrnInfoPtr scrn = output->scrn; + xf86CrtcConfigPtr config = XF86_CRTC_CONFIG_PTR(scrn); + int i; +#ifdef RANDR_12_INTERFACE + int size; +#endif + + if (output->MonInfo != NULL) + xfree(output->MonInfo); + + output->MonInfo = edid_mon; + + if (config->debug_modes) { + xf86DrvMsg(scrn->scrnIndex, X_INFO, "EDID for output %s\n", + output->name); + xf86PrintEDID(edid_mon); + } + + /* Set the DDC properties for the 'compat' output */ + if (output == config->output[config->compat_output]) + xf86SetDDCproperties(scrn, edid_mon); + +#ifdef RANDR_12_INTERFACE + /* Set the RandR output properties */ + size = 0; + if (edid_mon) + { + if (edid_mon->ver.version == 1) + size = 128; + else if (edid_mon->ver.version == 2) + size = 256; + } + xf86OutputSetEDIDProperty (output, edid_mon ? edid_mon->rawData : NULL, size); +#endif + + if (edid_mon) + { + /* Pull out a phyiscal size from a detailed timing if available. */ + for (i = 0; i < 4; i++) { + if (edid_mon->det_mon[i].type == DT && + edid_mon->det_mon[i].section.d_timings.h_size != 0 && + edid_mon->det_mon[i].section.d_timings.v_size != 0) + { + output->mm_width = edid_mon->det_mon[i].section.d_timings.h_size; + output->mm_height = edid_mon->det_mon[i].section.d_timings.v_size; + break; + } + } + + /* if no mm size is available from a detailed timing, check the max size field */ + if ((!output->mm_width || !output->mm_height) && + (edid_mon->features.hsize && edid_mon->features.vsize)) + { + output->mm_width = edid_mon->features.hsize * 10; + output->mm_height = edid_mon->features.vsize * 10; + } + } +} + +/** + * Return the list of modes supported by the EDID information + * stored in 'output' + */ +_X_EXPORT DisplayModePtr +xf86OutputGetEDIDModes (xf86OutputPtr output) +{ + ScrnInfoPtr scrn = output->scrn; + xf86MonPtr edid_mon = output->MonInfo; + + if (!edid_mon) + return NULL; + return xf86DDCGetModes(scrn->scrnIndex, edid_mon); +} + +_X_EXPORT xf86MonPtr +xf86OutputGetEDID (xf86OutputPtr output, I2CBusPtr pDDCBus) +{ + ScrnInfoPtr scrn = output->scrn; + xf86MonPtr mon; + + mon = xf86DoEDID_DDC2 (scrn->scrnIndex, pDDCBus); + if (mon) + xf86DDCApplyQuirks (scrn->scrnIndex, mon); + + return mon; +} + +static char *_xf86ConnectorNames[] = { + "None", "VGA", "DVI-I", "DVI-D", + "DVI-A", "Composite", "S-Video", + "Component", "LFP", "Proprietary", + "HDMI", "DisplayPort", + }; +_X_EXPORT char * +xf86ConnectorGetName(xf86ConnectorType connector) +{ + return _xf86ConnectorNames[connector]; +} + +static void +x86_crtc_box_intersect(BoxPtr dest, BoxPtr a, BoxPtr b) +{ + dest->x1 = a->x1 > b->x1 ? a->x1 : b->x1; + dest->x2 = a->x2 < b->x2 ? a->x2 : b->x2; + dest->y1 = a->y1 > b->y1 ? a->y1 : b->y1; + dest->y2 = a->y2 < b->y2 ? a->y2 : b->y2; + + if (dest->x1 >= dest->x2 || dest->y1 >= dest->y2) + dest->x1 = dest->x2 = dest->y1 = dest->y2 = 0; +} + +static void +x86_crtc_box(xf86CrtcPtr crtc, BoxPtr crtc_box) +{ + if (crtc->enabled) { + crtc_box->x1 = crtc->x; + crtc_box->x2 = crtc->x + xf86ModeWidth(&crtc->mode, crtc->rotation); + crtc_box->y1 = crtc->y; + crtc_box->y2 = crtc->y + xf86ModeHeight(&crtc->mode, crtc->rotation); + } else + crtc_box->x1 = crtc_box->x2 = crtc_box->y1 = crtc_box->y2 = 0; +} + +static int +xf86_crtc_box_area(BoxPtr box) +{ + return (int) (box->x2 - box->x1) * (int) (box->y2 - box->y1); +} + +/* + * Return the crtc covering 'box'. If two crtcs cover a portion of + * 'box', then prefer 'desired'. If 'desired' is NULL, then prefer the crtc + * with greater coverage + */ + +static xf86CrtcPtr +xf86_covering_crtc(ScrnInfoPtr pScrn, + BoxPtr box, + xf86CrtcPtr desired, + BoxPtr crtc_box_ret) +{ + xf86CrtcConfigPtr xf86_config = XF86_CRTC_CONFIG_PTR(pScrn); + xf86CrtcPtr crtc, best_crtc; + int coverage, best_coverage; + int c; + BoxRec crtc_box, cover_box; + + best_crtc = NULL; + best_coverage = 0; + crtc_box_ret->x1 = 0; + crtc_box_ret->x2 = 0; + crtc_box_ret->y1 = 0; + crtc_box_ret->y2 = 0; + for (c = 0; c < xf86_config->num_crtc; c++) { + crtc = xf86_config->crtc[c]; + x86_crtc_box(crtc, &crtc_box); + x86_crtc_box_intersect(&cover_box, &crtc_box, box); + coverage = xf86_crtc_box_area(&cover_box); + if (coverage && crtc == desired) { + *crtc_box_ret = crtc_box; + return crtc; + } else if (coverage > best_coverage) { + *crtc_box_ret = crtc_box; + best_crtc = crtc; + best_coverage = coverage; + } + } + return best_crtc; +} + +/* + * For overlay video, compute the relevant CRTC and + * clip video to that. + * + * returning FALSE means there was a memory failure of some kind, + * not that the video shouldn't be displayed + */ + +_X_EXPORT Bool +xf86_crtc_clip_video_helper(ScrnInfoPtr pScrn, + xf86CrtcPtr *crtc_ret, + xf86CrtcPtr desired_crtc, + BoxPtr dst, + INT32 *xa, + INT32 *xb, + INT32 *ya, + INT32 *yb, + RegionPtr reg, + INT32 width, + INT32 height) +{ + Bool ret; + RegionRec crtc_region_local; + RegionPtr crtc_region = reg; + + if (crtc_ret) { + BoxRec crtc_box; + xf86CrtcPtr crtc = xf86_covering_crtc(pScrn, dst, + desired_crtc, + &crtc_box); + + if (crtc) { + REGION_INIT (pScreen, &crtc_region_local, &crtc_box, 1); + crtc_region = &crtc_region_local; + REGION_INTERSECT (pScreen, crtc_region, crtc_region, reg); + } + *crtc_ret = crtc; + } + + ret = xf86XVClipVideoHelper(dst, xa, xb, ya, yb, + crtc_region, width, height); + + if (crtc_region != reg) + REGION_UNINIT (pScreen, &crtc_region_local); + + return ret; +} |