diff options
Diffstat (limited to 'xorg-server/hw/xfree86/modes/xf86Crtc.h')
| -rw-r--r-- | xorg-server/hw/xfree86/modes/xf86Crtc.h | 2047 |
1 files changed, 972 insertions, 1075 deletions
diff --git a/xorg-server/hw/xfree86/modes/xf86Crtc.h b/xorg-server/hw/xfree86/modes/xf86Crtc.h index e4037142f..68a968cc2 100644 --- a/xorg-server/hw/xfree86/modes/xf86Crtc.h +++ b/xorg-server/hw/xfree86/modes/xf86Crtc.h @@ -1,1075 +1,972 @@ -/*
- * Copyright © 2006 Keith Packard
- *
- * Permission to use, copy, modify, distribute, and sell this software and its
- * documentation for any purpose is hereby granted without fee, provided that
- * the above copyright notice appear in all copies and that both that copyright
- * notice and this permission notice appear in supporting documentation, and
- * that the name of the copyright holders not be used in advertising or
- * publicity pertaining to distribution of the software without specific,
- * written prior permission. The copyright holders make no representations
- * about the suitability of this software for any purpose. It is provided "as
- * is" without express or implied warranty.
- *
- * THE COPYRIGHT HOLDERS DISCLAIM ALL WARRANTIES WITH REGARD TO THIS SOFTWARE,
- * INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO
- * EVENT SHALL THE COPYRIGHT HOLDERS BE LIABLE FOR ANY SPECIAL, INDIRECT OR
- * CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE,
- * DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER
- * TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE
- * OF THIS SOFTWARE.
- */
-#ifndef _XF86CRTC_H_
-#define _XF86CRTC_H_
-
-#include <edid.h>
-#include "randrstr.h"
-#if XF86_MODES_RENAME
-#include "xf86Rename.h"
-#endif
-#include "xf86Modes.h"
-#include "xf86Cursor.h"
-#include "xf86i2c.h"
-#include "damage.h"
-#include "picturestr.h"
-
-/* Compat definitions for older X Servers. */
-#ifndef M_T_PREFERRED
-#define M_T_PREFERRED 0x08
-#endif
-#ifndef M_T_DRIVER
-#define M_T_DRIVER 0x40
-#endif
-#ifndef M_T_USERPREF
-#define M_T_USERPREF 0x80
-#endif
-#ifndef HARDWARE_CURSOR_ARGB
-#define HARDWARE_CURSOR_ARGB 0x00004000
-#endif
-
-typedef struct _xf86Crtc xf86CrtcRec, *xf86CrtcPtr;
-typedef struct _xf86Output xf86OutputRec, *xf86OutputPtr;
-
-/* define a standard for connector types */
-typedef enum _xf86ConnectorType {
- XF86ConnectorNone,
- XF86ConnectorVGA,
- XF86ConnectorDVI_I,
- XF86ConnectorDVI_D,
- XF86ConnectorDVI_A,
- XF86ConnectorComposite,
- XF86ConnectorSvideo,
- XF86ConnectorComponent,
- XF86ConnectorLFP,
- XF86ConnectorProprietary,
- XF86ConnectorHDMI,
- XF86ConnectorDisplayPort,
-} xf86ConnectorType;
-
-typedef enum _xf86OutputStatus {
- XF86OutputStatusConnected,
- XF86OutputStatusDisconnected,
- XF86OutputStatusUnknown
-} xf86OutputStatus;
-
-typedef enum _xf86CrtcSetFlags {
- XF86CrtcSetMode = 1, /* mode */
- XF86CrtcSetOutput = 2, /* outputs */
- XF86CrtcSetOrigin = 4, /* x/y */
- XF86CrtcSetTransform = 8, /* transform */
- XF86CrtcSetRotation = 16, /* rotation */
- XF86CrtcSetProperty = 32, /* output property */
- XF86CrtcSetScanoutPixmap = 64, /* scanout pixmap */
-} xf86CrtcSetFlags;
-
-typedef struct _xf86CrtcSet {
- xf86CrtcSetFlags flags;
- DisplayModePtr mode;
- Rotation rotation;
- RRTransformPtr transform;
- int x, y;
- PixmapPtr scanout_pixmap;
-} xf86CrtcSetRec;
-
-typedef struct _xf86CrtcFuncs {
- /**
- * Turns the crtc on/off, or sets intermediate power levels if available.
- *
- * Unsupported intermediate modes drop to the lower power setting. If the
- * mode is DPMSModeOff, the crtc must be disabled sufficiently for it to
- * be safe to call mode_set.
- */
- void
- (*dpms)(xf86CrtcPtr crtc,
- int mode);
-
- /**
- * Saves the crtc's state for restoration on VT switch.
- */
- void
- (*save)(xf86CrtcPtr crtc);
-
- /**
- * Restore's the crtc's state at VT switch.
- */
- void
- (*restore)(xf86CrtcPtr crtc);
-
- /**
- * Lock CRTC prior to mode setting, mostly for DRI.
- * Returns whether unlock is needed
- */
- Bool
- (*lock) (xf86CrtcPtr crtc);
-
- /**
- * Unlock CRTC after mode setting, mostly for DRI
- */
- void
- (*unlock) (xf86CrtcPtr crtc);
-
- /**
- * Callback to adjust the mode to be set in the CRTC.
- *
- * This allows a CRTC to adjust the clock or even the entire set of
- * timings, which is used for panels with fixed timings or for
- * buses with clock limitations.
- */
- Bool
- (*mode_fixup)(xf86CrtcPtr crtc,
- DisplayModePtr mode,
- DisplayModePtr adjusted_mode);
-
- /**
- * Prepare CRTC for an upcoming mode set.
- */
- void
- (*prepare)(xf86CrtcPtr crtc);
-
- /**
- * Callback for setting up a video mode after fixups have been made.
- */
- void
- (*mode_set)(xf86CrtcPtr crtc,
- DisplayModePtr mode,
- DisplayModePtr adjusted_mode,
- int x, int y);
-
- /**
- * Commit mode changes to a CRTC
- */
- void
- (*commit)(xf86CrtcPtr crtc);
-
- /* Set the color ramps for the CRTC to the given values. */
- void
- (*gamma_set)(xf86CrtcPtr crtc, CARD16 *red, CARD16 *green, CARD16 *blue,
- int size);
-
- /**
- * Allocate the shadow area, delay the pixmap creation until needed
- */
- void *
- (*shadow_allocate) (xf86CrtcPtr crtc, int width, int height);
-
- /**
- * Create shadow pixmap for rotation support
- */
- PixmapPtr
- (*shadow_create) (xf86CrtcPtr crtc, void *data, int width, int height);
-
- /**
- * Destroy shadow pixmap
- */
- void
- (*shadow_destroy) (xf86CrtcPtr crtc, PixmapPtr pPixmap, void *data);
-
- /**
- * Set cursor colors
- */
- void
- (*set_cursor_colors) (xf86CrtcPtr crtc, int bg, int fg);
-
- /**
- * Set cursor position
- */
- void
- (*set_cursor_position) (xf86CrtcPtr crtc, int x, int y);
-
- /**
- * Show cursor
- */
- void
- (*show_cursor) (xf86CrtcPtr crtc);
-
- /**
- * Hide cursor
- */
- void
- (*hide_cursor) (xf86CrtcPtr crtc);
-
- /**
- * Load monochrome image
- */
- void
- (*load_cursor_image) (xf86CrtcPtr crtc, CARD8 *image);
-
- /**
- * Load ARGB image
- */
- void
- (*load_cursor_argb) (xf86CrtcPtr crtc, CARD32 *image);
-
- /**
- * Clean up driver-specific bits of the crtc
- */
- void
- (*destroy) (xf86CrtcPtr crtc);
-
- /**
- * Less fine-grained mode setting entry point for kernel modesetting
- */
- Bool
- (*set_mode_major)(xf86CrtcPtr crtc, DisplayModePtr mode,
- Rotation rotation, int x, int y);
-
- /**
- * Callback for panning. Doesn't change the mode.
- * Added in ABI version 2
- */
- void
- (*set_origin)(xf86CrtcPtr crtc, int x, int y);
-
- /**
- * General mode setting entry point that does everything
- */
- Bool
- (*set)(xf86CrtcPtr crtc, xf86CrtcSetFlags flags);
-
-} xf86CrtcFuncsRec, *xf86CrtcFuncsPtr;
-
-#define XF86_CRTC_VERSION 3
-
-struct _xf86Crtc {
- /**
- * ABI versioning
- */
- int version;
-
- /**
- * Associated ScrnInfo
- */
- ScrnInfoPtr scrn;
-
- /**
- * Desired state of this CRTC
- *
- * Set when this CRTC should be driving one or more outputs
- */
- Bool enabled;
-
- /**
- * Active mode
- *
- * This reflects the mode as set in the CRTC currently
- * It will be cleared when the VT is not active or
- * during server startup
- */
- DisplayModeRec mode;
- Rotation rotation;
- PixmapPtr rotatedPixmap;
- void *rotatedData;
- PixmapPtr scanoutPixmap;
-
- /**
- * Position on screen
- *
- * Locates this CRTC within the frame buffer
- */
- int x, y;
-
- /**
- * Desired mode
- *
- * This is set to the requested mode, independent of
- * whether the VT is active. In particular, it receives
- * the startup configured mode and saves the active mode
- * on VT switch.
- */
- DisplayModeRec desiredMode;
- Rotation desiredRotation;
- int desiredX, desiredY;
-
- /** crtc-specific functions */
- const xf86CrtcFuncsRec *funcs;
-
- /**
- * Driver private
- *
- * Holds driver-private information
- */
- void *driver_private;
-
-#ifdef RANDR_12_INTERFACE
- /**
- * RandR crtc
- *
- * When RandR 1.2 is available, this
- * points at the associated crtc object
- */
- RRCrtcPtr randr_crtc;
-#else
- void *randr_crtc;
-#endif
-
- /**
- * Current cursor is ARGB
- */
- Bool cursor_argb;
- /**
- * Track whether cursor is within CRTC range
- */
- Bool cursor_in_range;
- /**
- * Track state of cursor associated with this CRTC
- */
- Bool cursor_shown;
-
- /**
- * Current transformation matrix
- */
- PictTransform crtc_to_framebuffer;
- /* framebuffer_to_crtc was removed in ABI 2 */
- struct pict_f_transform f_crtc_to_framebuffer; /* ABI 2 */
- struct pict_f_transform f_framebuffer_to_crtc; /* ABI 2 */
- PictFilterPtr filter; /* ABI 2 */
- xFixed *params; /* ABI 2 */
- int nparams; /* ABI 2 */
- int filter_width; /* ABI 2 */
- int filter_height; /* ABI 2 */
- Bool transform_in_use;
- Bool sprite_transform_in_use;
- RRTransformRec transform; /* ABI 2 */
- Bool transformPresent; /* ABI 2 */
- RRTransformRec desiredTransform; /* ABI 2 */
- Bool desiredTransformPresent; /* ABI 2 */
- /**
- * Bounding box in screen space
- */
- BoxRec bounds;
- /**
- * Panning:
- * TotalArea: total panning area, larger than CRTC's size
- * TrackingArea: Area of the pointer for which the CRTC is panned
- * border: Borders of the displayed CRTC area which induces panning if the pointer reaches them
- * Added in ABI version 2
- */
- BoxRec panningTotalArea;
- BoxRec panningTrackingArea;
- INT16 panningBorder[4];
-
- /**
- * Current gamma, especially useful after initial config.
- * Added in ABI version 3
- */
- CARD16 *gamma_red;
- CARD16 *gamma_green;
- CARD16 *gamma_blue;
- int gamma_size;
-
- /**
- * Actual state of this CRTC
- *
- * Set to TRUE after modesetting, set to FALSE if no outputs are connected
- * Added in ABI version 3
- */
- Bool active;
- /**
- * Clear the shadow
- */
- Bool shadowClear;
-
- /**
- * Sprite position transforms
- */
-
- /* Transform a screen coordinate to a crtc coordinate */
- struct pixman_f_transform f_screen_to_crtc;
-
- /* The user-specified portion of the screen to crtc conversion */
- struct pixman_f_transform user_sprite_position_transform;
-
- /* Transform a hardware cursor coordinate to a cursor coordinate */
- struct pixman_f_transform f_crtc_to_cursor;
-
- /* The user-specified portion of the cursor to hardware transform */
- struct pixman_f_transform user_sprite_image_transform;
-};
-
-typedef struct _xf86OutputFuncs {
- /**
- * Called to allow the output a chance to create properties after the
- * RandR objects have been created.
- */
- void
- (*create_resources)(xf86OutputPtr output);
-
- /**
- * Turns the output on/off, or sets intermediate power levels if available.
- *
- * Unsupported intermediate modes drop to the lower power setting. If the
- * mode is DPMSModeOff, the output must be disabled, as the DPLL may be
- * disabled afterwards.
- */
- void
- (*dpms)(xf86OutputPtr output,
- int mode);
-
- /**
- * Saves the output's state for restoration on VT switch.
- */
- void
- (*save)(xf86OutputPtr output);
-
- /**
- * Restore's the output's state at VT switch.
- */
- void
- (*restore)(xf86OutputPtr output);
-
- /**
- * Callback for testing a video mode for a given output.
- *
- * This function should only check for cases where a mode can't be supported
- * on the output specifically, and not represent generic CRTC limitations.
- *
- * \return MODE_OK if the mode is valid, or another MODE_* otherwise.
- */
- int
- (*mode_valid)(xf86OutputPtr output,
- DisplayModePtr pMode);
-
- /**
- * Callback to adjust the mode to be set in the CRTC.
- *
- * This allows an output to adjust the clock or even the entire set of
- * timings, which is used for panels with fixed timings or for
- * buses with clock limitations.
- */
- Bool
- (*mode_fixup)(xf86OutputPtr output,
- DisplayModePtr mode,
- DisplayModePtr adjusted_mode);
-
- /**
- * Callback for preparing mode changes on an output
- */
- void
- (*prepare)(xf86OutputPtr output);
-
- /**
- * Callback for committing mode changes on an output
- */
- void
- (*commit)(xf86OutputPtr output);
-
- /**
- * Callback for setting up a video mode after fixups have been made.
- *
- * This is only called while the output is disabled. The dpms callback
- * must be all that's necessary for the output, to turn the output on
- * after this function is called.
- */
- void
- (*mode_set)(xf86OutputPtr output,
- DisplayModePtr mode,
- DisplayModePtr adjusted_mode);
-
- /**
- * Probe for a connected output, and return detect_status.
- */
- xf86OutputStatus
- (*detect)(xf86OutputPtr output);
-
- /**
- * Query the device for the modes it provides.
- *
- * This function may also update MonInfo, mm_width, and mm_height.
- *
- * \return singly-linked list of modes or NULL if no modes found.
- */
- DisplayModePtr
- (*get_modes)(xf86OutputPtr output);
-
-#ifdef RANDR_12_INTERFACE
- /**
- * Callback when an output's property has changed.
- */
- Bool
- (*set_property)(xf86OutputPtr output,
- Atom property,
- RRPropertyValuePtr value);
-#endif
-#ifdef RANDR_13_INTERFACE
- /**
- * Callback to get an updated property value
- */
- Bool
- (*get_property)(xf86OutputPtr output,
- Atom property);
-#endif
-#ifdef RANDR_GET_CRTC_INTERFACE
- /**
- * Callback to get current CRTC for a given output
- */
- xf86CrtcPtr
- (*get_crtc)(xf86OutputPtr output);
-#endif
- /**
- * Clean up driver-specific bits of the output
- */
- void
- (*destroy) (xf86OutputPtr output);
-} xf86OutputFuncsRec, *xf86OutputFuncsPtr;
-
-
-#define XF86_OUTPUT_VERSION 2
-
-struct _xf86Output {
- /**
- * ABI versioning
- */
- int version;
-
- /**
- * Associated ScrnInfo
- */
- ScrnInfoPtr scrn;
-
- /**
- * Currently connected crtc (if any)
- *
- * If this output is not in use, this field will be NULL.
- */
- xf86CrtcPtr crtc;
-
- /**
- * Possible CRTCs for this output as a mask of crtc indices
- */
- CARD32 possible_crtcs;
-
- /**
- * Possible outputs to share the same CRTC as a mask of output indices
- */
- CARD32 possible_clones;
-
- /**
- * Whether this output can support interlaced modes
- */
- Bool interlaceAllowed;
-
- /**
- * Whether this output can support double scan modes
- */
- Bool doubleScanAllowed;
-
- /**
- * List of available modes on this output.
- *
- * This should be the list from get_modes(), plus perhaps additional
- * compatible modes added later.
- */
- DisplayModePtr probed_modes;
-
- /**
- * Options parsed from the related monitor section
- */
- OptionInfoPtr options;
-
- /**
- * Configured monitor section
- */
- XF86ConfMonitorPtr conf_monitor;
-
- /**
- * Desired initial position
- */
- int initial_x, initial_y;
-
- /**
- * Desired initial rotation
- */
- Rotation initial_rotation;
-
- /**
- * Current connection status
- *
- * This indicates whether a monitor is known to be connected
- * to this output or not, or whether there is no way to tell
- */
- xf86OutputStatus status;
-
- /** EDID monitor information */
- xf86MonPtr MonInfo;
-
- /** subpixel order */
- int subpixel_order;
-
- /** Physical size of the currently attached output device. */
- int mm_width, mm_height;
-
- /** Output name */
- char *name;
-
- /** output-specific functions */
- const xf86OutputFuncsRec *funcs;
-
- /** driver private information */
- void *driver_private;
-
- /** Whether to use the old per-screen Monitor config section */
- Bool use_screen_monitor;
-
-#ifdef RANDR_12_INTERFACE
- /**
- * RandR 1.2 output structure.
- *
- * When RandR 1.2 is available, this points at the associated
- * RandR output structure and is created when this output is created
- */
- RROutputPtr randr_output;
-#else
- void *randr_output;
-#endif
- /**
- * Desired initial panning
- * Added in ABI version 2
- */
- BoxRec initialTotalArea;
- BoxRec initialTrackingArea;
- INT16 initialBorder[4];
-};
-
-typedef enum _xf86SetConfigResponse {
- xf86SetConfigFailed, /* set_config failed */
- xf86SetConfigChecked, /* set_config validated the configuration */
- xf86SetConfigDone, /* set_config finished the work */
-} xf86SetConfigResponse;
-
-typedef struct _xf86CrtcSetConfig {
- xf86CrtcPtr crtc;
- int x, y;
- DisplayModeRec mode;
- Rotation rotation;
- int numOutputs;
- xf86OutputPtr *outputs;
- struct pict_f_transform sprite_position_transform;
- struct pict_f_transform sprite_image_transform;
-
- /* Probably want some internal structure for the pixmap so that
- * this can be set before the server is running
- */
- PixmapPtr pixmap;
- int pixmap_x, pixmap_y;
-} xf86CrtcSetConfigRec, *xf86CrtcSetConfigPtr;
-
-typedef struct _xf86CrtcScanoutFormat {
- int depth;
- int bitsPerPixel;
- int maxWidth, maxHeight;
- Rotation rotations;
- PictFormatShort format;
-} xf86CrtcScanoutFormat;
-
-typedef struct _xf86CrtcConfigFuncs {
- /**
- * Requests that the driver resize the screen.
- *
- * The driver is responsible for updating scrn->virtualX and scrn->virtualY.
- * If the requested size cannot be set, the driver should leave those values
- * alone and return FALSE.
- *
- * A naive driver that cannot reallocate the screen may simply change
- * virtual[XY]. A more advanced driver will want to also change the
- * devPrivate.ptr and devKind of the screen pixmap, update any offscreen
- * pixmaps it may have moved, and change pScrn->displayWidth.
- */
- Bool
- (*resize)(ScrnInfoPtr scrn,
- int width,
- int height);
-
- xf86SetConfigResponse
- (*set_config) (ScrnInfoPtr scrn,
- RRScreenConfigPtr screen_config,
- xf86CrtcSetConfigPtr crtc_configs,
- int num_configs);
-
- /**
- * Create a scanout pixmap
- */
- PixmapPtr
- (*create_scanout_pixmap)(ScrnInfoPtr scrn,
- int width,
- int height,
- Rotation rotations,
- xf86CrtcScanoutFormat *format);
-
-} xf86CrtcConfigFuncsRec, *xf86CrtcConfigFuncsPtr;
-
-typedef void (*xf86_crtc_notify_proc_ptr) (ScreenPtr pScreen);
-
-typedef struct _xf86CrtcConfig {
- int num_output;
- xf86OutputPtr *output;
- /**
- * compat_output is used whenever we deal
- * with legacy code that only understands a single
- * output. pScrn->modes will be loaded from this output,
- * adjust frame will whack this output, etc.
- */
- int compat_output;
-
- int num_crtc;
- xf86CrtcPtr *crtc;
-
- int minWidth, minHeight;
- int maxWidth, maxHeight;
-
- /* For crtc-based rotation */
- DamagePtr rotation_damage;
- Bool rotation_damage_registered;
-
- /* DGA */
- unsigned int dga_flags;
- unsigned long dga_address;
- DGAModePtr dga_modes;
- int dga_nmode;
- int dga_width, dga_height, dga_stride;
- DisplayModePtr dga_save_mode;
-
- const xf86CrtcConfigFuncsRec *funcs;
-
- CreateScreenResourcesProcPtr CreateScreenResources;
-
- CloseScreenProcPtr CloseScreen;
-
- /* Cursor information */
- xf86CursorInfoPtr cursor_info;
- CursorPtr cursor;
- CARD8 *cursor_image;
- Bool cursor_on;
- CARD32 cursor_fg, cursor_bg;
-
- /**
- * Options parsed from the related device section
- */
- OptionInfoPtr options;
-
- Bool debug_modes;
-
- /* wrap screen BlockHandler for rotation */
- ScreenBlockHandlerProcPtr BlockHandler;
-
- /* callback when crtc configuration changes */
- xf86_crtc_notify_proc_ptr xf86_crtc_notify;
-
- /*
- * Supported scanout pixmap formats
- */
- int num_scanout_formats;
- xf86CrtcScanoutFormat *scanout_formats;
-} xf86CrtcConfigRec, *xf86CrtcConfigPtr;
-
-extern _X_EXPORT int xf86CrtcConfigPrivateIndex;
-
-#define XF86_CRTC_CONFIG_PTR(p) ((xf86CrtcConfigPtr) ((p)->privates[xf86CrtcConfigPrivateIndex].ptr))
-
-static _X_INLINE xf86OutputPtr
-xf86CompatOutput(ScrnInfoPtr pScrn)
-{
- xf86CrtcConfigPtr config = XF86_CRTC_CONFIG_PTR(pScrn);
- return config->output[config->compat_output];
-}
-
-static _X_INLINE xf86CrtcPtr
-xf86CompatCrtc(ScrnInfoPtr pScrn)
-{
- xf86OutputPtr compat_output = xf86CompatOutput(pScrn);
- if (!compat_output)
- return NULL;
- return compat_output->crtc;
-}
-
-static _X_INLINE RRCrtcPtr
-xf86CompatRRCrtc(ScrnInfoPtr pScrn)
-{
- xf86CrtcPtr compat_crtc = xf86CompatCrtc(pScrn);
- if (!compat_crtc)
- return NULL;
- return compat_crtc->randr_crtc;
-}
-
-
-/*
- * Initialize xf86CrtcConfig structure
- */
-
-extern _X_EXPORT void
-xf86CrtcConfigInit (ScrnInfoPtr scrn,
- const xf86CrtcConfigFuncsRec *funcs);
-
-extern _X_EXPORT void
-xf86CrtcSetSizeRange (ScrnInfoPtr scrn,
- int minWidth, int minHeight,
- int maxWidth, int maxHeight);
-
-extern _X_EXPORT void
-xf86CrtcSetScanoutFormats (ScrnInfoPtr scrn,
- int num_formats,
- xf86CrtcScanoutFormat *formats);
-
-/*
- * Crtc functions
- */
-extern _X_EXPORT xf86CrtcPtr
-xf86CrtcCreate (ScrnInfoPtr scrn,
- const xf86CrtcFuncsRec *funcs);
-
-extern _X_EXPORT void
-xf86CrtcDestroy (xf86CrtcPtr crtc);
-
-/**
- * Change a crtc configuration (modes, outputs, etc)
- */
-
-extern _X_EXPORT Bool
-xf86CrtcSet (xf86CrtcPtr crtc, xf86CrtcSetRec *set);
-
-extern _X_EXPORT void
-xf86CrtcSetOrigin (xf86CrtcPtr crtc, int x, int y);
-
-/*
- * Assign crtc rotation during mode set
- */
-extern _X_EXPORT Bool
-xf86CrtcRotate (xf86CrtcPtr crtc);
-
-
-/*
- * Update cursor transform matrices after user changes
- * This is just the cursor subset of xf86CrtcRotate
- */
-extern _X_EXPORT void
-xf86CrtcRotateCursor (xf86CrtcPtr crtc);
-
-/*
- * Clean up any rotation data, used when a crtc is turned off
- * as well as when rotation is disabled.
- */
-extern _X_EXPORT void
-xf86RotateDestroy (xf86CrtcPtr crtc);
-
-/*
- * free shadow memory allocated for all crtcs
- */
-extern _X_EXPORT void
-xf86RotateFreeShadow(ScrnInfoPtr pScrn);
-
-/*
- * Clean up rotation during CloseScreen
- */
-extern _X_EXPORT void
-xf86RotateCloseScreen (ScreenPtr pScreen);
-
-/**
- * Return whether any output is assigned to the crtc
- */
-extern _X_EXPORT Bool
-xf86CrtcInUse (xf86CrtcPtr crtc);
-
-/*
- * Output functions
- */
-extern _X_EXPORT xf86OutputPtr
-xf86OutputCreate (ScrnInfoPtr scrn,
- const xf86OutputFuncsRec *funcs,
- const char *name);
-
-extern _X_EXPORT void
-xf86OutputUseScreenMonitor (xf86OutputPtr output, Bool use_screen_monitor);
-
-extern _X_EXPORT Bool
-xf86OutputRename (xf86OutputPtr output, const char *name);
-
-extern _X_EXPORT void
-xf86OutputDestroy (xf86OutputPtr output);
-
-extern _X_EXPORT void
-xf86ProbeOutputModes (ScrnInfoPtr pScrn, int maxX, int maxY);
-
-extern _X_EXPORT void
-xf86SetScrnInfoModes (ScrnInfoPtr pScrn);
-
-#ifdef RANDR_13_INTERFACE
-# define ScreenInitRetType int
-#else
-# define ScreenInitRetType Bool
-#endif
-
-extern _X_EXPORT ScreenInitRetType
-xf86CrtcScreenInit (ScreenPtr pScreen);
-
-extern _X_EXPORT Bool
-xf86InitialConfiguration (ScrnInfoPtr pScrn, Bool canGrow);
-
-extern _X_EXPORT void
-xf86DPMSSet(ScrnInfoPtr pScrn, int PowerManagementMode, int flags);
-
-extern _X_EXPORT Bool
-xf86SaveScreen(ScreenPtr pScreen, int mode);
-
-extern _X_EXPORT void
-xf86DisableUnusedFunctions(ScrnInfoPtr pScrn);
-
-extern _X_EXPORT DisplayModePtr
-xf86OutputFindClosestMode (xf86OutputPtr output, DisplayModePtr desired);
-
-extern _X_EXPORT Bool
-xf86SetSingleMode (ScrnInfoPtr pScrn, DisplayModePtr desired, Rotation rotation);
-
-/**
- * Set the EDID information for the specified output
- */
-extern _X_EXPORT void
-xf86OutputSetEDID (xf86OutputPtr output, xf86MonPtr edid_mon);
-
-/**
- * Return the list of modes supported by the EDID information
- * stored in 'output'
- */
-extern _X_EXPORT DisplayModePtr
-xf86OutputGetEDIDModes (xf86OutputPtr output);
-
-extern _X_EXPORT xf86MonPtr
-xf86OutputGetEDID (xf86OutputPtr output, I2CBusPtr pDDCBus);
-
-/**
- * Initialize dga for this screen
- */
-
-#ifdef XFreeXDGA
-extern _X_EXPORT Bool
-xf86DiDGAInit (ScreenPtr pScreen, unsigned long dga_address);
-
-/* this is the real function, used only internally */
-_X_INTERNAL Bool
-_xf86_di_dga_init_internal (ScreenPtr pScreen);
-
-/**
- * Re-initialize dga for this screen (as when the set of modes changes)
- */
-
-extern _X_EXPORT Bool
-xf86DiDGAReInit (ScreenPtr pScreen);
-#endif
-
-/* This is the real function, used only internally */
-_X_INTERNAL Bool
-_xf86_di_dga_reinit_internal (ScreenPtr pScreen);
-
-/*
- * Set the subpixel order reported for the screen using
- * the information from the outputs
- */
-
-extern _X_EXPORT void
-xf86CrtcSetScreenSubpixelOrder (ScreenPtr pScreen);
-
-/*
- * Get a standard string name for a connector type
- */
-extern _X_EXPORT char *
-xf86ConnectorGetName(xf86ConnectorType connector);
-
-/*
- * Using the desired mode information in each crtc, set
- * modes (used in EnterVT functions, or at server startup)
- */
-
-extern _X_EXPORT Bool
-xf86SetDesiredModes (ScrnInfoPtr pScrn);
-
-/**
- * Initialize the CRTC-based cursor code. CRTC function vectors must
- * contain relevant cursor setting functions.
- *
- * Driver should call this from ScreenInit function
- */
-extern _X_EXPORT Bool
-xf86_cursors_init (ScreenPtr screen, int max_width, int max_height, int flags);
-
-/**
- * Called when anything on the screen is reconfigured.
- *
- * Reloads cursor images as needed, then adjusts cursor positions.
- *
- * Driver should call this from crtc commit function.
- */
-extern _X_EXPORT void
-xf86_reload_cursors (ScreenPtr screen);
-
-/**
- * Called from EnterVT to turn the cursors back on
- */
-extern _X_EXPORT void
-xf86_show_cursors (ScrnInfoPtr scrn);
-
-/**
- * Called by the driver to turn cursors off
- */
-extern _X_EXPORT void
-xf86_hide_cursors (ScrnInfoPtr scrn);
-
-/**
- * Clean up CRTC-based cursor code. Driver must call this at CloseScreen time.
- */
-extern _X_EXPORT void
-xf86_cursors_fini (ScreenPtr screen);
-
-/*
- * For overlay video, compute the relevant CRTC and
- * clip video to that.
- * wraps xf86XVClipVideoHelper()
- */
-
-extern _X_EXPORT Bool
-xf86_crtc_clip_video_helper(ScrnInfoPtr pScrn,
- xf86CrtcPtr *crtc_ret,
- xf86CrtcPtr desired_crtc,
- BoxPtr dst,
- INT32 *xa,
- INT32 *xb,
- INT32 *ya,
- INT32 *yb,
- RegionPtr reg,
- INT32 width,
- INT32 height);
-
-extern _X_EXPORT xf86_crtc_notify_proc_ptr
-xf86_wrap_crtc_notify (ScreenPtr pScreen, xf86_crtc_notify_proc_ptr new);
-
-extern _X_EXPORT void
-xf86_unwrap_crtc_notify(ScreenPtr pScreen, xf86_crtc_notify_proc_ptr old);
-
-extern _X_EXPORT void
-xf86_crtc_notify(ScreenPtr pScreen);
-
-/**
- * Gamma
- */
-
-extern _X_EXPORT Bool
-xf86_crtc_supports_gamma(ScrnInfoPtr pScrn);
-
-#endif /* _XF86CRTC_H_ */
+/* + * Copyright © 2006 Keith Packard + * + * Permission to use, copy, modify, distribute, and sell this software and its + * documentation for any purpose is hereby granted without fee, provided that + * the above copyright notice appear in all copies and that both that copyright + * notice and this permission notice appear in supporting documentation, and + * that the name of the copyright holders not be used in advertising or + * publicity pertaining to distribution of the software without specific, + * written prior permission. The copyright holders make no representations + * about the suitability of this software for any purpose. It is provided "as + * is" without express or implied warranty. + * + * THE COPYRIGHT HOLDERS DISCLAIM ALL WARRANTIES WITH REGARD TO THIS SOFTWARE, + * INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO + * EVENT SHALL THE COPYRIGHT HOLDERS BE LIABLE FOR ANY SPECIAL, INDIRECT OR + * CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, + * DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER + * TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE + * OF THIS SOFTWARE. + */ +#ifndef _XF86CRTC_H_ +#define _XF86CRTC_H_ + +#include <edid.h> +#include "randrstr.h" +#if XF86_MODES_RENAME +#include "xf86Rename.h" +#endif +#include "xf86Modes.h" +#include "xf86Cursor.h" +#include "xf86i2c.h" +#include "damage.h" +#include "picturestr.h" + +/* Compat definitions for older X Servers. */ +#ifndef M_T_PREFERRED +#define M_T_PREFERRED 0x08 +#endif +#ifndef M_T_DRIVER +#define M_T_DRIVER 0x40 +#endif +#ifndef M_T_USERPREF +#define M_T_USERPREF 0x80 +#endif +#ifndef HARDWARE_CURSOR_ARGB +#define HARDWARE_CURSOR_ARGB 0x00004000 +#endif + +typedef struct _xf86Crtc xf86CrtcRec, *xf86CrtcPtr; +typedef struct _xf86Output xf86OutputRec, *xf86OutputPtr; + +/* define a standard for connector types */ +typedef enum _xf86ConnectorType { + XF86ConnectorNone, + XF86ConnectorVGA, + XF86ConnectorDVI_I, + XF86ConnectorDVI_D, + XF86ConnectorDVI_A, + XF86ConnectorComposite, + XF86ConnectorSvideo, + XF86ConnectorComponent, + XF86ConnectorLFP, + XF86ConnectorProprietary, + XF86ConnectorHDMI, + XF86ConnectorDisplayPort, +} xf86ConnectorType; + +typedef enum _xf86OutputStatus { + XF86OutputStatusConnected, + XF86OutputStatusDisconnected, + XF86OutputStatusUnknown +} xf86OutputStatus; + +typedef struct _xf86CrtcFuncs { + /** + * Turns the crtc on/off, or sets intermediate power levels if available. + * + * Unsupported intermediate modes drop to the lower power setting. If the + * mode is DPMSModeOff, the crtc must be disabled sufficiently for it to + * be safe to call mode_set. + */ + void + (*dpms)(xf86CrtcPtr crtc, + int mode); + + /** + * Saves the crtc's state for restoration on VT switch. + */ + void + (*save)(xf86CrtcPtr crtc); + + /** + * Restore's the crtc's state at VT switch. + */ + void + (*restore)(xf86CrtcPtr crtc); + + /** + * Lock CRTC prior to mode setting, mostly for DRI. + * Returns whether unlock is needed + */ + Bool + (*lock) (xf86CrtcPtr crtc); + + /** + * Unlock CRTC after mode setting, mostly for DRI + */ + void + (*unlock) (xf86CrtcPtr crtc); + + /** + * Callback to adjust the mode to be set in the CRTC. + * + * This allows a CRTC to adjust the clock or even the entire set of + * timings, which is used for panels with fixed timings or for + * buses with clock limitations. + */ + Bool + (*mode_fixup)(xf86CrtcPtr crtc, + DisplayModePtr mode, + DisplayModePtr adjusted_mode); + + /** + * Prepare CRTC for an upcoming mode set. + */ + void + (*prepare)(xf86CrtcPtr crtc); + + /** + * Callback for setting up a video mode after fixups have been made. + */ + void + (*mode_set)(xf86CrtcPtr crtc, + DisplayModePtr mode, + DisplayModePtr adjusted_mode, + int x, int y); + + /** + * Commit mode changes to a CRTC + */ + void + (*commit)(xf86CrtcPtr crtc); + + /* Set the color ramps for the CRTC to the given values. */ + void + (*gamma_set)(xf86CrtcPtr crtc, CARD16 *red, CARD16 *green, CARD16 *blue, + int size); + + /** + * Allocate the shadow area, delay the pixmap creation until needed + */ + void * + (*shadow_allocate) (xf86CrtcPtr crtc, int width, int height); + + /** + * Create shadow pixmap for rotation support + */ + PixmapPtr + (*shadow_create) (xf86CrtcPtr crtc, void *data, int width, int height); + + /** + * Destroy shadow pixmap + */ + void + (*shadow_destroy) (xf86CrtcPtr crtc, PixmapPtr pPixmap, void *data); + + /** + * Set cursor colors + */ + void + (*set_cursor_colors) (xf86CrtcPtr crtc, int bg, int fg); + + /** + * Set cursor position + */ + void + (*set_cursor_position) (xf86CrtcPtr crtc, int x, int y); + + /** + * Show cursor + */ + void + (*show_cursor) (xf86CrtcPtr crtc); + + /** + * Hide cursor + */ + void + (*hide_cursor) (xf86CrtcPtr crtc); + + /** + * Load monochrome image + */ + void + (*load_cursor_image) (xf86CrtcPtr crtc, CARD8 *image); + + /** + * Load ARGB image + */ + void + (*load_cursor_argb) (xf86CrtcPtr crtc, CARD32 *image); + + /** + * Clean up driver-specific bits of the crtc + */ + void + (*destroy) (xf86CrtcPtr crtc); + + /** + * Less fine-grained mode setting entry point for kernel modesetting + */ + Bool + (*set_mode_major)(xf86CrtcPtr crtc, DisplayModePtr mode, + Rotation rotation, int x, int y); + + /** + * Callback for panning. Doesn't change the mode. + * Added in ABI version 2 + */ + void + (*set_origin)(xf86CrtcPtr crtc, int x, int y); + +} xf86CrtcFuncsRec, *xf86CrtcFuncsPtr; + +#define XF86_CRTC_VERSION 3 + +struct _xf86Crtc { + /** + * ABI versioning + */ + int version; + + /** + * Associated ScrnInfo + */ + ScrnInfoPtr scrn; + + /** + * Desired state of this CRTC + * + * Set when this CRTC should be driving one or more outputs + */ + Bool enabled; + + /** + * Active mode + * + * This reflects the mode as set in the CRTC currently + * It will be cleared when the VT is not active or + * during server startup + */ + DisplayModeRec mode; + Rotation rotation; + PixmapPtr rotatedPixmap; + void *rotatedData; + + /** + * Position on screen + * + * Locates this CRTC within the frame buffer + */ + int x, y; + + /** + * Desired mode + * + * This is set to the requested mode, independent of + * whether the VT is active. In particular, it receives + * the startup configured mode and saves the active mode + * on VT switch. + */ + DisplayModeRec desiredMode; + Rotation desiredRotation; + int desiredX, desiredY; + + /** crtc-specific functions */ + const xf86CrtcFuncsRec *funcs; + + /** + * Driver private + * + * Holds driver-private information + */ + void *driver_private; + +#ifdef RANDR_12_INTERFACE + /** + * RandR crtc + * + * When RandR 1.2 is available, this + * points at the associated crtc object + */ + RRCrtcPtr randr_crtc; +#else + void *randr_crtc; +#endif + + /** + * Current cursor is ARGB + */ + Bool cursor_argb; + /** + * Track whether cursor is within CRTC range + */ + Bool cursor_in_range; + /** + * Track state of cursor associated with this CRTC + */ + Bool cursor_shown; + + /** + * Current transformation matrix + */ + PictTransform crtc_to_framebuffer; + /* framebuffer_to_crtc was removed in ABI 2 */ + struct pict_f_transform f_crtc_to_framebuffer; /* ABI 2 */ + struct pict_f_transform f_framebuffer_to_crtc; /* ABI 2 */ + PictFilterPtr filter; /* ABI 2 */ + xFixed *params; /* ABI 2 */ + int nparams; /* ABI 2 */ + int filter_width; /* ABI 2 */ + int filter_height; /* ABI 2 */ + Bool transform_in_use; + RRTransformRec transform; /* ABI 2 */ + Bool transformPresent; /* ABI 2 */ + RRTransformRec desiredTransform; /* ABI 2 */ + Bool desiredTransformPresent; /* ABI 2 */ + /** + * Bounding box in screen space + */ + BoxRec bounds; + /** + * Panning: + * TotalArea: total panning area, larger than CRTC's size + * TrackingArea: Area of the pointer for which the CRTC is panned + * border: Borders of the displayed CRTC area which induces panning if the pointer reaches them + * Added in ABI version 2 + */ + BoxRec panningTotalArea; + BoxRec panningTrackingArea; + INT16 panningBorder[4]; + + /** + * Current gamma, especially useful after initial config. + * Added in ABI version 3 + */ + CARD16 *gamma_red; + CARD16 *gamma_green; + CARD16 *gamma_blue; + int gamma_size; + + /** + * Actual state of this CRTC + * + * Set to TRUE after modesetting, set to FALSE if no outputs are connected + * Added in ABI version 3 + */ + Bool active; + /** + * Clear the shadow + */ + Bool shadowClear; +}; + +typedef struct _xf86OutputFuncs { + /** + * Called to allow the output a chance to create properties after the + * RandR objects have been created. + */ + void + (*create_resources)(xf86OutputPtr output); + + /** + * Turns the output on/off, or sets intermediate power levels if available. + * + * Unsupported intermediate modes drop to the lower power setting. If the + * mode is DPMSModeOff, the output must be disabled, as the DPLL may be + * disabled afterwards. + */ + void + (*dpms)(xf86OutputPtr output, + int mode); + + /** + * Saves the output's state for restoration on VT switch. + */ + void + (*save)(xf86OutputPtr output); + + /** + * Restore's the output's state at VT switch. + */ + void + (*restore)(xf86OutputPtr output); + + /** + * Callback for testing a video mode for a given output. + * + * This function should only check for cases where a mode can't be supported + * on the output specifically, and not represent generic CRTC limitations. + * + * \return MODE_OK if the mode is valid, or another MODE_* otherwise. + */ + int + (*mode_valid)(xf86OutputPtr output, + DisplayModePtr pMode); + + /** + * Callback to adjust the mode to be set in the CRTC. + * + * This allows an output to adjust the clock or even the entire set of + * timings, which is used for panels with fixed timings or for + * buses with clock limitations. + */ + Bool + (*mode_fixup)(xf86OutputPtr output, + DisplayModePtr mode, + DisplayModePtr adjusted_mode); + + /** + * Callback for preparing mode changes on an output + */ + void + (*prepare)(xf86OutputPtr output); + + /** + * Callback for committing mode changes on an output + */ + void + (*commit)(xf86OutputPtr output); + + /** + * Callback for setting up a video mode after fixups have been made. + * + * This is only called while the output is disabled. The dpms callback + * must be all that's necessary for the output, to turn the output on + * after this function is called. + */ + void + (*mode_set)(xf86OutputPtr output, + DisplayModePtr mode, + DisplayModePtr adjusted_mode); + + /** + * Probe for a connected output, and return detect_status. + */ + xf86OutputStatus + (*detect)(xf86OutputPtr output); + + /** + * Query the device for the modes it provides. + * + * This function may also update MonInfo, mm_width, and mm_height. + * + * \return singly-linked list of modes or NULL if no modes found. + */ + DisplayModePtr + (*get_modes)(xf86OutputPtr output); + +#ifdef RANDR_12_INTERFACE + /** + * Callback when an output's property has changed. + */ + Bool + (*set_property)(xf86OutputPtr output, + Atom property, + RRPropertyValuePtr value); +#endif +#ifdef RANDR_13_INTERFACE + /** + * Callback to get an updated property value + */ + Bool + (*get_property)(xf86OutputPtr output, + Atom property); +#endif +#ifdef RANDR_GET_CRTC_INTERFACE + /** + * Callback to get current CRTC for a given output + */ + xf86CrtcPtr + (*get_crtc)(xf86OutputPtr output); +#endif + /** + * Clean up driver-specific bits of the output + */ + void + (*destroy) (xf86OutputPtr output); +} xf86OutputFuncsRec, *xf86OutputFuncsPtr; + + +#define XF86_OUTPUT_VERSION 2 + +struct _xf86Output { + /** + * ABI versioning + */ + int version; + + /** + * Associated ScrnInfo + */ + ScrnInfoPtr scrn; + + /** + * Currently connected crtc (if any) + * + * If this output is not in use, this field will be NULL. + */ + xf86CrtcPtr crtc; + + /** + * Possible CRTCs for this output as a mask of crtc indices + */ + CARD32 possible_crtcs; + + /** + * Possible outputs to share the same CRTC as a mask of output indices + */ + CARD32 possible_clones; + + /** + * Whether this output can support interlaced modes + */ + Bool interlaceAllowed; + + /** + * Whether this output can support double scan modes + */ + Bool doubleScanAllowed; + + /** + * List of available modes on this output. + * + * This should be the list from get_modes(), plus perhaps additional + * compatible modes added later. + */ + DisplayModePtr probed_modes; + + /** + * Options parsed from the related monitor section + */ + OptionInfoPtr options; + + /** + * Configured monitor section + */ + XF86ConfMonitorPtr conf_monitor; + + /** + * Desired initial position + */ + int initial_x, initial_y; + + /** + * Desired initial rotation + */ + Rotation initial_rotation; + + /** + * Current connection status + * + * This indicates whether a monitor is known to be connected + * to this output or not, or whether there is no way to tell + */ + xf86OutputStatus status; + + /** EDID monitor information */ + xf86MonPtr MonInfo; + + /** subpixel order */ + int subpixel_order; + + /** Physical size of the currently attached output device. */ + int mm_width, mm_height; + + /** Output name */ + char *name; + + /** output-specific functions */ + const xf86OutputFuncsRec *funcs; + + /** driver private information */ + void *driver_private; + + /** Whether to use the old per-screen Monitor config section */ + Bool use_screen_monitor; + +#ifdef RANDR_12_INTERFACE + /** + * RandR 1.2 output structure. + * + * When RandR 1.2 is available, this points at the associated + * RandR output structure and is created when this output is created + */ + RROutputPtr randr_output; +#else + void *randr_output; +#endif + /** + * Desired initial panning + * Added in ABI version 2 + */ + BoxRec initialTotalArea; + BoxRec initialTrackingArea; + INT16 initialBorder[4]; +}; + +typedef struct _xf86CrtcConfigFuncs { + /** + * Requests that the driver resize the screen. + * + * The driver is responsible for updating scrn->virtualX and scrn->virtualY. + * If the requested size cannot be set, the driver should leave those values + * alone and return FALSE. + * + * A naive driver that cannot reallocate the screen may simply change + * virtual[XY]. A more advanced driver will want to also change the + * devPrivate.ptr and devKind of the screen pixmap, update any offscreen + * pixmaps it may have moved, and change pScrn->displayWidth. + */ + Bool + (*resize)(ScrnInfoPtr scrn, + int width, + int height); +} xf86CrtcConfigFuncsRec, *xf86CrtcConfigFuncsPtr; + +typedef void (*xf86_crtc_notify_proc_ptr) (ScreenPtr pScreen); + +typedef struct _xf86CrtcConfig { + int num_output; + xf86OutputPtr *output; + /** + * compat_output is used whenever we deal + * with legacy code that only understands a single + * output. pScrn->modes will be loaded from this output, + * adjust frame will whack this output, etc. + */ + int compat_output; + + int num_crtc; + xf86CrtcPtr *crtc; + + int minWidth, minHeight; + int maxWidth, maxHeight; + + /* For crtc-based rotation */ + DamagePtr rotation_damage; + Bool rotation_damage_registered; + + /* DGA */ + unsigned int dga_flags; + unsigned long dga_address; + DGAModePtr dga_modes; + int dga_nmode; + int dga_width, dga_height, dga_stride; + DisplayModePtr dga_save_mode; + + const xf86CrtcConfigFuncsRec *funcs; + + CreateScreenResourcesProcPtr CreateScreenResources; + + CloseScreenProcPtr CloseScreen; + + /* Cursor information */ + xf86CursorInfoPtr cursor_info; + CursorPtr cursor; + CARD8 *cursor_image; + Bool cursor_on; + CARD32 cursor_fg, cursor_bg; + + /** + * Options parsed from the related device section + */ + OptionInfoPtr options; + + Bool debug_modes; + + /* wrap screen BlockHandler for rotation */ + ScreenBlockHandlerProcPtr BlockHandler; + + /* callback when crtc configuration changes */ + xf86_crtc_notify_proc_ptr xf86_crtc_notify; + +} xf86CrtcConfigRec, *xf86CrtcConfigPtr; + +extern _X_EXPORT int xf86CrtcConfigPrivateIndex; + +#define XF86_CRTC_CONFIG_PTR(p) ((xf86CrtcConfigPtr) ((p)->privates[xf86CrtcConfigPrivateIndex].ptr)) + +static _X_INLINE xf86OutputPtr +xf86CompatOutput(ScrnInfoPtr pScrn) +{ + xf86CrtcConfigPtr config = XF86_CRTC_CONFIG_PTR(pScrn); + return config->output[config->compat_output]; +} + +static _X_INLINE xf86CrtcPtr +xf86CompatCrtc(ScrnInfoPtr pScrn) +{ + xf86OutputPtr compat_output = xf86CompatOutput(pScrn); + if (!compat_output) + return NULL; + return compat_output->crtc; +} + +static _X_INLINE RRCrtcPtr +xf86CompatRRCrtc(ScrnInfoPtr pScrn) +{ + xf86CrtcPtr compat_crtc = xf86CompatCrtc(pScrn); + if (!compat_crtc) + return NULL; + return compat_crtc->randr_crtc; +} + + +/* + * Initialize xf86CrtcConfig structure + */ + +extern _X_EXPORT void +xf86CrtcConfigInit (ScrnInfoPtr scrn, + const xf86CrtcConfigFuncsRec *funcs); + +extern _X_EXPORT void +xf86CrtcSetSizeRange (ScrnInfoPtr scrn, + int minWidth, int minHeight, + int maxWidth, int maxHeight); + +/* + * Crtc functions + */ +extern _X_EXPORT xf86CrtcPtr +xf86CrtcCreate (ScrnInfoPtr scrn, + const xf86CrtcFuncsRec *funcs); + +extern _X_EXPORT void +xf86CrtcDestroy (xf86CrtcPtr crtc); + + +/** + * Sets the given video mode on the given crtc + */ + +extern _X_EXPORT Bool +xf86CrtcSetModeTransform (xf86CrtcPtr crtc, DisplayModePtr mode, Rotation rotation, + RRTransformPtr transform, int x, int y); + +extern _X_EXPORT Bool +xf86CrtcSetMode (xf86CrtcPtr crtc, DisplayModePtr mode, Rotation rotation, + int x, int y); + +extern _X_EXPORT void +xf86CrtcSetOrigin (xf86CrtcPtr crtc, int x, int y); + +/* + * Assign crtc rotation during mode set + */ +extern _X_EXPORT Bool +xf86CrtcRotate (xf86CrtcPtr crtc); + +/* + * Clean up any rotation data, used when a crtc is turned off + * as well as when rotation is disabled. + */ +extern _X_EXPORT void +xf86RotateDestroy (xf86CrtcPtr crtc); + +/* + * free shadow memory allocated for all crtcs + */ +extern _X_EXPORT void +xf86RotateFreeShadow(ScrnInfoPtr pScrn); + +/* + * Clean up rotation during CloseScreen + */ +extern _X_EXPORT void +xf86RotateCloseScreen (ScreenPtr pScreen); + +/** + * Return whether any output is assigned to the crtc + */ +extern _X_EXPORT Bool +xf86CrtcInUse (xf86CrtcPtr crtc); + +/* + * Output functions + */ +extern _X_EXPORT xf86OutputPtr +xf86OutputCreate (ScrnInfoPtr scrn, + const xf86OutputFuncsRec *funcs, + const char *name); + +extern _X_EXPORT void +xf86OutputUseScreenMonitor (xf86OutputPtr output, Bool use_screen_monitor); + +extern _X_EXPORT Bool +xf86OutputRename (xf86OutputPtr output, const char *name); + +extern _X_EXPORT void +xf86OutputDestroy (xf86OutputPtr output); + +extern _X_EXPORT void +xf86ProbeOutputModes (ScrnInfoPtr pScrn, int maxX, int maxY); + +extern _X_EXPORT void +xf86SetScrnInfoModes (ScrnInfoPtr pScrn); + +#ifdef RANDR_13_INTERFACE +# define ScreenInitRetType int +#else +# define ScreenInitRetType Bool +#endif + +extern _X_EXPORT ScreenInitRetType +xf86CrtcScreenInit (ScreenPtr pScreen); + +extern _X_EXPORT Bool +xf86InitialConfiguration (ScrnInfoPtr pScrn, Bool canGrow); + +extern _X_EXPORT void +xf86DPMSSet(ScrnInfoPtr pScrn, int PowerManagementMode, int flags); + +extern _X_EXPORT Bool +xf86SaveScreen(ScreenPtr pScreen, int mode); + +extern _X_EXPORT void +xf86DisableUnusedFunctions(ScrnInfoPtr pScrn); + +extern _X_EXPORT DisplayModePtr +xf86OutputFindClosestMode (xf86OutputPtr output, DisplayModePtr desired); + +extern _X_EXPORT Bool +xf86SetSingleMode (ScrnInfoPtr pScrn, DisplayModePtr desired, Rotation rotation); + +/** + * Set the EDID information for the specified output + */ +extern _X_EXPORT void +xf86OutputSetEDID (xf86OutputPtr output, xf86MonPtr edid_mon); + +/** + * Return the list of modes supported by the EDID information + * stored in 'output' + */ +extern _X_EXPORT DisplayModePtr +xf86OutputGetEDIDModes (xf86OutputPtr output); + +extern _X_EXPORT xf86MonPtr +xf86OutputGetEDID (xf86OutputPtr output, I2CBusPtr pDDCBus); + +/** + * Initialize dga for this screen + */ + +#ifdef XFreeXDGA +extern _X_EXPORT Bool +xf86DiDGAInit (ScreenPtr pScreen, unsigned long dga_address); + +/* this is the real function, used only internally */ +_X_INTERNAL Bool +_xf86_di_dga_init_internal (ScreenPtr pScreen); + +/** + * Re-initialize dga for this screen (as when the set of modes changes) + */ + +extern _X_EXPORT Bool +xf86DiDGAReInit (ScreenPtr pScreen); +#endif + +/* This is the real function, used only internally */ +_X_INTERNAL Bool +_xf86_di_dga_reinit_internal (ScreenPtr pScreen); + +/* + * Set the subpixel order reported for the screen using + * the information from the outputs + */ + +extern _X_EXPORT void +xf86CrtcSetScreenSubpixelOrder (ScreenPtr pScreen); + +/* + * Get a standard string name for a connector type + */ +extern _X_EXPORT char * +xf86ConnectorGetName(xf86ConnectorType connector); + +/* + * Using the desired mode information in each crtc, set + * modes (used in EnterVT functions, or at server startup) + */ + +extern _X_EXPORT Bool +xf86SetDesiredModes (ScrnInfoPtr pScrn); + +/** + * Initialize the CRTC-based cursor code. CRTC function vectors must + * contain relevant cursor setting functions. + * + * Driver should call this from ScreenInit function + */ +extern _X_EXPORT Bool +xf86_cursors_init (ScreenPtr screen, int max_width, int max_height, int flags); + +/** + * Called when anything on the screen is reconfigured. + * + * Reloads cursor images as needed, then adjusts cursor positions. + * + * Driver should call this from crtc commit function. + */ +extern _X_EXPORT void +xf86_reload_cursors (ScreenPtr screen); + +/** + * Called from EnterVT to turn the cursors back on + */ +extern _X_EXPORT void +xf86_show_cursors (ScrnInfoPtr scrn); + +/** + * Called by the driver to turn cursors off + */ +extern _X_EXPORT void +xf86_hide_cursors (ScrnInfoPtr scrn); + +/** + * Clean up CRTC-based cursor code. Driver must call this at CloseScreen time. + */ +extern _X_EXPORT void +xf86_cursors_fini (ScreenPtr screen); + +/* + * For overlay video, compute the relevant CRTC and + * clip video to that. + * wraps xf86XVClipVideoHelper() + */ + +extern _X_EXPORT Bool +xf86_crtc_clip_video_helper(ScrnInfoPtr pScrn, + xf86CrtcPtr *crtc_ret, + xf86CrtcPtr desired_crtc, + BoxPtr dst, + INT32 *xa, + INT32 *xb, + INT32 *ya, + INT32 *yb, + RegionPtr reg, + INT32 width, + INT32 height); + +extern _X_EXPORT xf86_crtc_notify_proc_ptr +xf86_wrap_crtc_notify (ScreenPtr pScreen, xf86_crtc_notify_proc_ptr new); + +extern _X_EXPORT void +xf86_unwrap_crtc_notify(ScreenPtr pScreen, xf86_crtc_notify_proc_ptr old); + +extern _X_EXPORT void +xf86_crtc_notify(ScreenPtr pScreen); + +/** + * Gamma + */ + +extern _X_EXPORT Bool +xf86_crtc_supports_gamma(ScrnInfoPtr pScrn); + +#endif /* _XF86CRTC_H_ */ |