diff options
Diffstat (limited to 'xorg-server/hw/xfree86/utils/xorgconfig/xorgconfig.c')
| -rw-r--r-- | xorg-server/hw/xfree86/utils/xorgconfig/xorgconfig.c | 2890 |
1 files changed, 0 insertions, 2890 deletions
diff --git a/xorg-server/hw/xfree86/utils/xorgconfig/xorgconfig.c b/xorg-server/hw/xfree86/utils/xorgconfig/xorgconfig.c deleted file mode 100644 index 30eb83182..000000000 --- a/xorg-server/hw/xfree86/utils/xorgconfig/xorgconfig.c +++ /dev/null @@ -1,2890 +0,0 @@ -/* - * This is a configuration program that will create a base XF86Config - * file based on menu choices. Its main feature is that clueless users - * may be less inclined to select crazy sync rates way over monitor spec, - * by presenting a menu with standard monitor types. Also some people - * don't read docs unless an executable that they can run tells them to. - * - * It assumes a 24-line or bigger text console. - * - * Revision history: - * 25Sep94 Initial version. - * 27Sep94 Fix hsync range of monitor types to match with best possible mode. - * Remove 'const'. - * Tweak descriptions. - * 28Sep94 Fixes from J"org Wunsch: - * Don't use gets(). - * Add mouse device prompt. - * Fix lines overrun for 24-line console. - * Increase buffer size for probeonly output. - * 29Sep94 Fix bad bug with old XF86Config preserving during probeonly run. - * Add note about vertical refresh in interlaced modes. - * Name gets() replacement getstring(). - * Add warning about binary paths. - * Fixes from David Dawes: - * Don't use 'ln -sf'. - * Omit man path reference in comment. - * Generate only a generic 320x200 SVGA section for accel cards. - * Only allow writing to /usr/X11R6/lib/X11 if root, and use - * -xf86config for the -probeonly phase (root only). - * Fix bug that forces screen type to accel in some cases. - * 30Sep94 Continue after clocks probe fails. - * Note about programmable clocks. - * Rename to 'xf86config'. Not to be confused with XF86Config - * or the -xf86config option. - * 07Oct94 Correct hsync in standard mode timings comments, and include - * the proper +/-h/vsync flags. - * 11Oct94 Skip 'numclocks:' and 'pixel clocks:' lines when probing for - * clocks. - * 18Oct94 Add check for existence of /usr/X11R6. - * Add note about ctrl-alt-backspace. - * 06Nov94 Add comment above standard mode timings in XF86Config. - * 24Dec94 Add low-resolution modes using doublescan. - * 29Dec94 Add note in horizontal sync range selection. - * Ask about ClearDTR/RTS option for Mouse Systems mice. - * Ask about writing to /etc/XF86Config. - * Allow link to be set in /var/X11R6/bin. - * Note about X -probeonly crashing. - * Add keyboard Alt binding option for non-ASCII characters. - * Add card database selection. - * Write temporary XF86Config for clock probing in /tmp instead - * of /usr/X11R6/lib/X11. - * Add RAMDAC and Clockchip menu. - * 27Mar99 Modified for XFree86 4.0 config file format - * 06Sep02 Write comment block about 'DontVTSwitch'. - * - * Possible enhancements: - * - Add more standard mode timings (also applies to README.Config). Missing - * are 1024x768 @ 72 Hz, 1152x900 modes, and 1280x1024 @ ~70 Hz. - * I suspect there is a VESA standard for 1024x768 @ 72 Hz with 77 MHz dot - * clock, and 1024x768 @ 75 Hz with 78.7 MHz dot clock. New types of - * monitors probably work better with VESA 75 Hz timings. - * - Add option for creation of clear, minimal XF86Config. - * - The card database doesn't include most of the entries in previous - * databases. - * - * Send comments to H.Hanemaayer@inter.nl.net. - * - * Things to keep up-to-date: - * - Accelerated server names. - * - Ramdac and Clockchip settings. - * - The card database. - * - */ -/* Oct2000 - * New 'Configuration of XKB' section. - * Author: Ivan Pascal The XFree86 Project. - */ -/* - * Nov2002 - * Some enhancements: - * - Add new PS/2 mouse protocol. - * "IMPS/2","ExplorerPS/2","ThinkingMousePS/2","MouseManPlusPS/2", - * "GlidePointPS/2","NetMousePS/2" and "NetScrollPS/2". - * - Add mouse-speed setting for PS/2 mouse. - * - Fix seg.fault problem on Solaris. - * - Add modestring "1400x1050"(for ATI Mobile-Rage). - * - Add videomemory 8192, 16384, 32768, 65536, 131072 and 262144. - * - Ready to DRI. - * - Load xtt module instead of freetype module. - * - Add font path "/TrueType/" and "/freefont/". - * Chisato Yamauchi(cyamauch@phyas.aichi-edu.ac.jp) - */ - -#ifdef HAVE_CONFIG_H -# include "xorg-server.h" -# include "xkb-config.h" -#endif - -#include <stdlib.h> -#include <stdio.h> -#include <ctype.h> -#include <string.h> -#include <unistd.h> -#include <errno.h> -#include <sys/types.h> -#include <sys/stat.h> - -#include <X11/Xlib.h> -#include <X11/extensions/XKBstr.h> -#include <X11/extensions/XKBrules.h> -#define MAX_XKBOPTIONS 5 - -#include "cards.h" - - -/* - * Define the following to 310 to remove references to XFree86 features that - * have been added since XFree86 3.1 (e.g. DoubleScan modes). - * or to 311 to remove certain new modelines - */ -#define XFREE86_VERSION 400 - -/* - * Define this to have /etc/X11/XF86Config prompted for as the default - * location to write the XF86Config file to. - */ -#define PREFER_XF86CONFIG_IN_ETC - -/* - * Define this to force the user to go through XKB configuration section. - * - */ -#define FORCE_XKB_DIALOG - -/* - * Configuration variables. - */ - -#define MAX_CLOCKS_LINES 16 - -#define DUMBCONFIG2 "dumbconfig.2" -#define DUMBCONFIG3 "dumbconfig.3" - -/* some more vars to make path names in texts more flexible. OS/2 users - * may be more irritated than Unix users - */ -#ifndef PROJECTROOT -#define PROJECTROOT "/usr" -#endif -#define TREEROOT PROJECTROOT -#define TREEROOTLX TREEROOT "/lib/X11" -#define TREEROOTCFG TREEROOT "/etc/X11" -#define TREEROOTSHARE TREEROOT "/share/X11" -#ifdef XDOCDIR -# define TREEROOTDOC XDOCDIR -#else -# define TREEROOTDOC TREEROOTLX "/doc" -#endif -#ifdef XFONTDIR -# define TREEROOTFONT XFONTDIR -#else -# define TREEROOTFONT TREEROOTLX "/fonts" -#endif -#define MODULEPATH TREEROOT "/lib/modules" - -#define XSERVERNAME_FOR_PROBE "X" - -#ifndef XCONFIGFILE -#define XCONFIGFILE "xorg.conf" -#endif -#define CONFIGNAME XCONFIGFILE - -/* - * This is the filename of the temporary XF86Config file that is written - * when the program is told to probe clocks (which can only happen for - * root). - */ -#define TEMPORARY_XF86CONFIG_DIR_PREFIX "/tmp/."XCONFIGFILE -#define TEMPORARY_XF86CONFIG_FILENAME XCONFIGFILE".tmp" - -#ifndef XF86_VERSION_MAJOR -#ifdef XVERSION -#if XVERSION > 40000000 -#define XF86_VERSION_MAJOR (XVERSION / 10000000) -#else -#define XF86_VERSION_MAJOR (XVERSION / 1000) -#endif -#else -#define XF86_VERSION_MAJOR 4 -#endif -#endif - - -int config_mousetype; /* Mouse. */ -int config_emulate3buttons; -int config_chordmiddle; -int config_cleardtrrts; -char *config_pointerdevice; -int config_altmeta; /* Keyboard. */ -int config_monitortype; /* Monitor. */ -char *config_hsyncrange; -char *config_vsyncrange; -char *config_monitoridentifier; -int config_videomemory; /* Video card. */ -int config_screentype; /* mono, vga16, svga, accel */ -char *config_deviceidentifier; -int config_numberofclockslines; -char *config_clocksline[MAX_CLOCKS_LINES]; -char *config_modesline8bpp; -char *config_modesline16bpp; -char *config_modesline24bpp; -int config_virtual; /* 1 (yes) or 0 (no) */ -int config_virtualx8bpp, config_virtualy8bpp; -int config_virtualx16bpp, config_virtualy16bpp; -int config_virtualx24bpp, config_virtualy24bpp; -char *config_ramdac; -char *config_dacspeed; -char *config_clockchip; -#if defined(__OpenBSD__) && defined(WSCONS_SUPPORT) && !defined(PCVT_SUPPORT) -char *config_keyboard_dev = "/dev/wskbd0"; -#endif -int config_xkbdisable = 0; -char *config_xkbrules; -char *config_xkbmodel = "pc105"; -char *config_xkblayout = "us"; -char *config_xkbvariant = (char *) 0; -char *config_xkboptions = (char *) 0; -char *config_depth; - -char *temp_dir = ""; - -/* - * These are from the selected card definition. Parameters from the - * definition are offered during the questioning about the video card. - */ - -int card_selected; /* Card selected from database. */ - - -static int write_XF86Config(char *filename); - - -/* - * This is the initial intro text that appears when the program is started. - */ - -static char *intro_text = -"\n" -"This program will create a basic " CONFIGNAME " file, based on menu selections\n" -"you make. It will ask for a pathname when it is ready to write the file.\n" -"\n" -"The " CONFIGNAME " file usually resides in /etc/X11 or " TREEROOTCFG ". If\n" -"no " CONFIGNAME " file is present there, " __XSERVERNAME__" will probe the system to\n" -"autoconfigure itself. You can run " __XSERVERNAME__ " -configure to generate a " CONFIGNAME "\n" -"file based on the results of autoconfiguration, or let this program\n" -"produce a base " CONFIGNAME " file for your configuration, and fine-tune it.\n" -"A sample " CONFIGNAME " file is also supplied with "__XSERVERNAME__"; it is configured \n" -"for a standard VGA card and monitor with 640x480 resolution.\n" -"\n" -"There are also many chipset and card-specific options and settings available,\n" -"but this program does not know about these. On some configurations some of\n" -"these settings must be specified. Refer to the X driver man pages and the\n" -"chipset-specific READMEs in " TREEROOTDOC " for further details.\n" -#if 0 -" Refer to " TREEROOTDOC "/README.Config\n" -"for a detailed overview of the configuration process.\n" -"\n" -"(what should we change this section to?)\n" -"For accelerated servers (including accelerated drivers in the SVGA server),\n" -"there are many chipset and card-specific options and settings. This program\n" -"does not know about these. On some configurations some of these settings must\n" -"be specified. Refer to the server man pages and chipset-specific READMEs.\n" -#endif -"\n" -"Before continuing with this program, make sure you know what video card\n" -"you have, and preferably also the chipset it uses and the amount of video\n" -"memory on your video card, as well as the specifications of your monitor.\n" -"\n" -; - -static char *finalcomment_text = -"File has been written. Take a look at it before starting an X server. Note that\n" -"the " CONFIGNAME " file must be in one of the directories searched by the server\n" -"(e.g. /etc/X11) in order to be used. Within the server press\n" -"ctrl, alt and '+' simultaneously to cycle video resolutions. Pressing ctrl,\n" -"alt and backspace simultaneously immediately exits the server (use if\n" -"the monitor doesn't sync for a particular mode).\n" -"\n" -"For further configuration, refer to the " XCONFIGFILE "(" FILEMANSUFFIX ") manual page.\n" -"\n"; - -static void * -Malloc(int i) { - void *p; - - p = malloc(i); - if (p == NULL) { - printf("Fatal malloc error\n"); - exit(-1); - } - return p; -} - -static char * -Strdup(const char *s){ - char *d; - - d = Malloc(strlen(s) + 1); - strcpy(d, s); - return d; -} - -static void -createtmpdir(void) { - /* length of prefix + 20 (digits in 2**64) + 1 (slash) + 1 */ - temp_dir = Malloc(strlen(TEMPORARY_XF86CONFIG_DIR_PREFIX) + 22); - sprintf(temp_dir, "%s%ld", TEMPORARY_XF86CONFIG_DIR_PREFIX, - (long)getpid()); - if (mkdir(temp_dir, 0700) != 0) { - printf("Cannot create directory %s\n", temp_dir); - exit(-1); - } - /* append a slash */ - strcat(temp_dir, "/"); -} - - -void -keypress(void) { - printf("Press enter to continue, or ctrl-c to abort."); - getchar(); - printf("\n"); -} - -static void -emptylines(void) { - int i; - for (i = 0; i < 50; i++) - printf("\n"); -} - -static int -answerisyes(char *s) -{ - if (s[0] == '\'') /* For fools that type the ' literally. */ - return tolower(s[1]) == 'y'; - return tolower(s[0]) == 'y'; -} - -/* - * This is a replacement for gets(). Limit is 80 chars. - * The 386BSD descendants scream about using gets(), for good reason. - */ - -static void -getstring(char *s) -{ - char *cp; - if (fgets(s, 80, stdin) == NULL) - exit(1); - cp = strchr(s, '\n'); - if (cp) - *cp=0; -} - -/* - * Mouse configuration. - */ - -int M_OSMOUSE, M_WSMOUSE, M_AUTO, - M_SYSMOUSE, M_MOUSESYSTEMS, M_PS2, - M_MICROSOFT, M_BUSMOUSE, M_IMPS2, - M_EXPLORER_PS2, M_GLIDEPOINT_PS2, M_MOUSEMANPLUS_PS2, - M_NETMOUSE_PS2, M_NETSCROLL_PS2, M_THINKINGMOUSE_PS2, - M_ACECAD, M_GLIDEPOINT, M_INTELLIMOUSE, - M_LOGITECH, M_MMHITTAB, M_MMSERIES, - M_MOUSEMAN, M_THINKINGMOUSE, M_VUID; - -struct { - char *name; - int *ident; - char *desc; -} mouse_info[] = { -#if defined(QNX4) -#define DEF_PROTO_STRING "OSMOUSE" - {"OSMOUSE", &M_OSMOUSE, - "OSMOUSE" - }, -#endif -#ifdef WSCONS_SUPPORT -#define WS_MOUSE_STRING "wsmouse" -#define DEF_PROTO_STRING WS_MOUSE_STRING - {WS_MOUSE_STRING, &M_WSMOUSE, - "wsmouse protocol" - }, -#endif -#ifndef DEF_PROTO_STRING -#define DEF_PROTO_STRING "Auto" -#endif - {"Auto", &M_AUTO, - "Auto detect" - }, -#ifdef sun - {"VUID", &M_VUID, - "Solaris VUID protocol (SPARC, USB, or virtual mouse)" - }, -#endif - {"SysMouse", &M_SYSMOUSE, - "SysMouse" - }, -#define M_MOUSESYSTEMS_STRING "MouseSystems" - {M_MOUSESYSTEMS_STRING, &M_MOUSESYSTEMS, - "Mouse Systems (3-button protocol)" - }, - {"PS/2", &M_PS2, - "PS/2 Mouse" - }, -#define M_MICROSOFT_STRING "Microsoft" - {M_MICROSOFT_STRING, &M_MICROSOFT, - "Microsoft compatible (2-button protocol)" - }, - {"Busmouse", &M_BUSMOUSE, - "Bus Mouse" - }, -#ifndef __FreeBSD__ - {"IMPS/2", &M_IMPS2, - "IntelliMouse PS/2" - }, - {"ExplorerPS/2", &M_EXPLORER_PS2, - "Explorer PS/2" - }, - {"GlidePointPS/2", &M_GLIDEPOINT_PS2, - "GlidePoint PS/2" - }, - {"MouseManPlusPS/2", &M_MOUSEMANPLUS_PS2, - "MouseManPlus PS/2" - }, - {"NetMousePS/2", &M_NETMOUSE_PS2, - "NetMouse PS/2" - }, - {"NetScrollPS/2", &M_NETSCROLL_PS2, - "NetScroll PS/2" - }, - {"ThinkingMousePS/2", &M_THINKINGMOUSE_PS2, - "ThinkingMouse PS/2" - }, -#endif - {"AceCad", &M_ACECAD, - "AceCad" - }, - {"GlidePoint", &M_GLIDEPOINT, - "GlidePoint" - }, - {"IntelliMouse", &M_INTELLIMOUSE, - "Microsoft IntelliMouse" - }, - {"Logitech", &M_LOGITECH, - "Logitech Mouse (serial, old type, Logitech protocol)" - }, - {"MMHitTab", &M_MMHITTAB, - "MM HitTablet" - }, - {"MMSeries", &M_MMSERIES, - "MM Series" /* XXXX These descriptions should be improved. */ - }, - {"MouseMan", &M_MOUSEMAN, - "Logitech MouseMan (Microsoft compatible)" - }, - {"ThinkingMouse", &M_THINKINGMOUSE, - "ThinkingMouse" - }, -}; - -#ifdef WSCONS_SUPPORT -# define DEF_MOUSEDEV "/dev/wsmouse"; -#elif defined(__FreeBSD__) || defined(__DragonFly__) -# define DEF_MOUSEDEV "/dev/sysmouse"; -#elif defined(__linux__) -# define DEF_MOUSEDEV "/dev/input/mice"; -#else -# define DEF_MOUSEDEV "/dev/mouse"; -#endif - -static char *mouseintro_text = -"First specify a mouse protocol type. Choose one from the following list:\n" -"\n"; - -static char *mousedev_text = -"Now give the full device name that the mouse is connected to, for example\n" -"/dev/tty00. Just pressing enter will use the default, %s.\n" -"\n"; - -static char *mousecomment_text = -"The recommended protocol is " DEF_PROTO_STRING ". If you have a very old mouse\n" -"or don't want OS support or auto detection, and you have a two-button\n" -"or three-button serial mouse, it is most likely of type " M_MICROSOFT_STRING ".\n" -#ifdef WSCONS_SUPPORT -"\n" -"If your system uses the wscons console driver, with a PS/2 type mouse,\n" -"select " WS_MOUSE_STRING ".\n" -#endif -"\n"; - -static char *twobuttonmousecomment_text = -"You have selected a two-button mouse protocol. It is recommended that you\n" -"enable Emulate3Buttons.\n"; - -static char *threebuttonmousecomment_text = -"You have selected a three-button mouse protocol. It is recommended that you\n" -"do not enable Emulate3Buttons, unless the third button doesn't work.\n"; - -static char *unknownbuttonsmousecomment_text = -"If your mouse has only two buttons, it is recommended that you enable\n" -"Emulate3Buttons.\n"; - -static char *microsoftmousecomment_text = -"You have selected a Microsoft protocol mouse. If your mouse was made by\n" -"Logitech, you might want to enable ChordMiddle which could cause the\n" -"third button to work.\n"; - -static char *mousesystemscomment_text = -"You have selected a Mouse Systems protocol mouse. If your mouse is normally\n" -"in Microsoft-compatible mode, enabling the ClearDTR and ClearRTS options\n" -"may cause it to switch to Mouse Systems mode when the server starts.\n"; - -static char *logitechmousecomment_text = -"You have selected a Logitech protocol mouse. This is only valid for old\n" -"Logitech mice.\n"; - -static char *mousemancomment_text = -"You have selected a Logitech MouseMan type mouse. You might want to enable\n" -"ChordMiddle which could cause the third button to work.\n"; - -static void -mouse_configuration(void) { - -#if !defined(QNX4) - int i, j; - char s[80]; - char *def_mousedev = DEF_MOUSEDEV; - -#define MOUSETYPE_COUNT sizeof(mouse_info)/sizeof(mouse_info[0]) - for (i = 0; i < MOUSETYPE_COUNT; i++) - *(mouse_info[i].ident) = i; - - for (i=0;;) { - emptylines(); - printf("%s", mouseintro_text); - for (j = i; j < i + 14 && j < MOUSETYPE_COUNT; j++) - printf("%2d. %s [%s]\n", j + 1, - mouse_info[j].name, mouse_info[j].desc); - printf("\n"); - printf("%s", mousecomment_text); - printf("Enter a protocol number: "); - getstring(s); - if (strlen(s) == 0) { - i += 14; - if (i >= MOUSETYPE_COUNT) - i = 0; - continue; - } - config_mousetype = atoi(s) - 1; - if (config_mousetype >= 0 && config_mousetype < MOUSETYPE_COUNT) - break; - } - printf("\n"); - - if (config_mousetype == M_LOGITECH) { - /* Logitech. */ - printf("%s", logitechmousecomment_text); - printf("\n"); - printf("Please answer the following question with either 'y' or 'n'.\n"); - printf("Are you sure it's really not a Microsoft compatible one? "); - getstring(s); - if (!answerisyes(s)) - config_mousetype = M_MICROSOFT; - printf("\n"); - } - - config_chordmiddle = 0; - if (config_mousetype == M_MICROSOFT || config_mousetype == M_MOUSEMAN) { - /* Microsoft or MouseMan. */ - if (config_mousetype == M_MICROSOFT) - printf("%s", microsoftmousecomment_text); - else - printf("%s", mousemancomment_text); - printf("\n"); - printf("Please answer the following question with either 'y' or 'n'.\n"); - printf("Do you want to enable ChordMiddle? "); - getstring(s); - if (answerisyes(s)) - config_chordmiddle = 1; - printf("\n"); - } - - config_cleardtrrts = 0; - if (config_mousetype == M_MOUSESYSTEMS) { - /* Mouse Systems. */ - printf("%s", mousesystemscomment_text); - printf("\n"); - printf("Please answer the following question with either 'y' or 'n'.\n"); - printf("Do you want to enable ClearDTR and ClearRTS? "); - getstring(s); - if (answerisyes(s)) - config_cleardtrrts = 1; - printf("\n"); - } - - if (config_mousetype == M_MICROSOFT) { - if (config_chordmiddle) - printf("%s", threebuttonmousecomment_text); - else - printf("%s", twobuttonmousecomment_text); - } - else if (config_mousetype == M_MOUSESYSTEMS || - config_mousetype == M_INTELLIMOUSE) { - printf("%s", threebuttonmousecomment_text); - } - else { - printf("%s", unknownbuttonsmousecomment_text); - } - - printf("\n"); - - printf("Please answer the following question with either 'y' or 'n'.\n"); - printf("Do you want to enable Emulate3Buttons? "); - getstring(s); - if (answerisyes(s)) - config_emulate3buttons = 1; - else - config_emulate3buttons = 0; - printf("\n"); - -#if (defined(sun) && (defined(__i386) || defined(__x86))) - /* SPARC & USB mice (VUID or AUTO protocols) default to /dev/mouse, - but PS/2 mice default to /dev/kdmouse */ - if ((config_mousetype != M_AUTO) && (config_mousetype != M_VUID)) { - def_mousedev = "/dev/kdmouse"; - } -#endif - - printf(mousedev_text, def_mousedev); - printf("Mouse device: "); - getstring(s); - if (strlen(s) == 0) { - config_pointerdevice = def_mousedev; - } else { - config_pointerdevice = Malloc(strlen(s) + 1); - strcpy(config_pointerdevice, s); - } - printf("\n"); - -#else - /* set some reasonable defaults for OS/2 */ - config_mousetype = M_OSMOUSE; - config_chordmiddle = 0; - config_cleardtrrts = 0; - config_emulate3buttons = 0; - config_pointerdevice = "QNXMOUSE"; -#endif -} - - -/* - * Keyboard configuration. - */ - -/* - * Configuration of XKB - */ -static char *xkbmodeltext = -"Please select one of the following keyboard types that is the better\n" -"description of your keyboard. If nothing really matches,\n" -"choose \"Generic 104-key PC\"\n\n"; - -static char *xkblayouttext = -"Please select the layout corresponding to your keyboard\n"; - -static char *xkbvarianttext = -"Please enter a variant name for '%s' layout. Or just press enter\n" -"for default variant\n\n"; - -static char *xkboptionstext = -"Please answer the following question with either 'y' or 'n'.\n" -"Do you want to select additional XKB options (group switcher,\n" -"group indicator, etc.)? "; - -#if defined(__OpenBSD__) && defined(WSCONS_SUPPORT) && !defined(PCVT_SUPPORT) -static char *kbdevtext = -"Please enter the device name for your keyboard or just press enter\n" -"for the default of wskbd0\n\n"; -#endif - -static void -keyboard_configuration(void) -{ - int i, j; - char s[80]; - char *rulesfile; - int number, options[MAX_XKBOPTIONS], num_options; - XkbRF_RulesPtr rules; - -#if defined(__OpenBSD__) && defined(WSCONS_SUPPORT) && !defined(PCVT_SUPPORT) - printf(kbdevtext); - getstring(s); - if (strlen(s) != 0) { - config_keyboard_dev = Malloc(strlen(s) + 1); - strcpy(config_keyboard_dev, s); - } -#endif - -#ifndef XKB_RULES_DIR -# define XKB_RULES_DIR XKB_BASE_DIRECTORY "/rules" -#endif - -#ifdef XFREE98_XKB - config_xkbrules = "xfree98"; /* static */ - rulesfile = XKB_RULES_DIR "/xfree98"; -#else - config_xkbrules = __XKBDEFRULES__; /* static */ - rulesfile = XKB_RULES_DIR "/" __XKBDEFRULES__; -#endif - - rules = XkbRF_Load(rulesfile, "", True, False); - emptylines(); - - if (!rules) { - printf("XKB rules file '%s' not found\n", rulesfile); - printf("Keyboard XKB options will be set to default values.\n"); - keypress(); - return; - } - - number = -1; - for (i=0;;) { - emptylines(); - printf(xkbmodeltext); - for (j = i; j < i + 16 && j < rules->models.num_desc; j++) - printf("%3d %-50s\n", j+1, rules->models.desc[j].desc); - printf("\nEnter a number to choose the keyboard.\n\n"); - if (rules->models.num_desc >= 16) - printf("Press enter for the next page\n"); - getstring(s); - if (strlen(s) == 0) { - i += 16; - if (i > rules->models.num_desc) - i = 0; - continue; - } - number = atoi(s) - 1; - if (number >= 0 && number < rules->models.num_desc) - break; - } - - i = strlen(rules->models.desc[number].name) + 1; - config_xkbmodel = Malloc(i); - sprintf(config_xkbmodel,"%s", rules->models.desc[number].name); - - emptylines(); - printf(xkblayouttext); - - number = -1; - for (i=0;;) { - emptylines(); - for (j = i; j < i + 18 && j < rules->layouts.num_desc; j++) - printf("%3d %-50s\n", j+1, - rules->layouts.desc[j].desc); - printf("\n"); - printf("Enter a number to choose the country.\n"); - if (rules->layouts.num_desc >= 18) - printf("Press enter for the next page\n"); - printf("\n"); - getstring(s); - if (strlen(s) == 0) { - i += 18; - if (i > rules->layouts.num_desc) - i = 0; - continue; - } - number = atoi(s) - 1; - if (number >= 0 && number < rules->layouts.num_desc) - break; - } - config_xkblayout = Malloc(strlen(rules->layouts.desc[number].name)+1); - sprintf(config_xkblayout,"%s", rules->layouts.desc[number].name); - - emptylines(); - printf(xkbvarianttext, config_xkblayout); - getstring(s); - if (strlen(s) != 0) { - config_xkbvariant = Malloc(strlen(s) + 1); - strcpy(config_xkbvariant, s); - } - - emptylines(); - printf(xkboptionstext); - getstring(s); - if (!answerisyes(s)) - return; - - num_options = 0; - for (j=0,i=0;;) { - if (!strchr(rules->options.desc[i].name, ':')) { - emptylines(); - printf(" %s\n\n", rules->options.desc[i].desc); - j = i; - } else { - printf("%3d %-50s\n", i - j, rules->options.desc[i].desc); - } - i++; - if ( i == rules->options.num_desc || - !strchr(rules->options.desc[i].name, ':')) { - printf("\nPlease select the option or just press enter if none\n"); - getstring(s); - if (strlen(s) != 0) { - number = atoi(s); - if (number && (num_options < MAX_XKBOPTIONS)) { - options[num_options++] = number + j; - } - } - } - if (i == rules->options.num_desc) - break; - } - - if (!num_options) - return; - - for (j=0,i=0; i<num_options; i++) { - j += strlen(rules->options.desc[options[i]].name); - } - config_xkboptions = Malloc(j + num_options); - for (j=0,i=0; i<num_options; i++) { - j += sprintf(config_xkboptions+j,"%s%s", - i == 0 ? "": "," ,rules->options.desc[options[i]].name); - } - return; -} - - - -/* - * Monitor configuration. - */ - -static char *monitorintro_text = -"Now we want to set the specifications of the monitor. The two critical\n" -"parameters are the vertical refresh rate, which is the rate at which the\n" -"the whole screen is refreshed, and most importantly the horizontal sync rate,\n" -"which is the rate at which scanlines are displayed.\n" -"\n" -"The valid range for horizontal sync and vertical sync should be documented\n" -"in the manual of your monitor.\n" -"\n"; - -static char *hsyncintro_text = -"You must indicate the horizontal sync range of your monitor. You can either\n" -"select one of the predefined ranges below that correspond to industry-\n" -"standard monitor types, or give a specific range.\n" -"\n" -"It is VERY IMPORTANT that you do not specify a monitor type with a horizontal\n" -"sync range that is beyond the capabilities of your monitor. If in doubt,\n" -"choose a conservative setting.\n" -"\n"; - -static char *customhsync_text = -"Please enter the horizontal sync range of your monitor, in the format used\n" -"in the table of monitor types above. You can either specify one or more\n" -"continuous ranges (e.g. 15-25, 30-50), or one or more fixed sync frequencies.\n" -"\n"; - -static char *vsyncintro_text = -"You must indicate the vertical sync range of your monitor. You can either\n" -"select one of the predefined ranges below that correspond to industry-\n" -"standard monitor types, or give a specific range. For interlaced modes,\n" -"the number that counts is the high one (e.g. 87 Hz rather than 43 Hz).\n" -"\n" -" 1 50-70\n" -" 2 50-90\n" -" 3 50-100\n" -" 4 40-150\n" -" 5 Enter your own vertical sync range\n"; - -static char *monitordescintro_text = -"You must now enter a few identification/description strings, namely an\n" -"identifier, a vendor name, and a model name. Just pressing enter will fill\n" -"in default names.\n" -"\n"; - -#define NU_MONITORTYPES 10 - -static char *monitortype_range[NU_MONITORTYPES] = { - "31.5", - "31.5 - 35.1", - "31.5, 35.5", - "31.5, 35.15, 35.5", - "31.5 - 37.9", - "31.5 - 48.5", - "31.5 - 57.0", - "31.5 - 64.3", - "31.5 - 79.0", - "31.5 - 82.0" -}; - -static char *monitortype_name[NU_MONITORTYPES] = { - "Standard VGA, 640x480 @ 60 Hz", - "Super VGA, 800x600 @ 56 Hz", - "8514 Compatible, 1024x768 @ 87 Hz interlaced (no 800x600)", - "Super VGA, 1024x768 @ 87 Hz interlaced, 800x600 @ 56 Hz", - "Extended Super VGA, 800x600 @ 60 Hz, 640x480 @ 72 Hz", - "Non-Interlaced SVGA, 1024x768 @ 60 Hz, 800x600 @ 72 Hz", - "High Frequency SVGA, 1024x768 @ 70 Hz", - "Monitor that can do 1280x1024 @ 60 Hz", - "Monitor that can do 1280x1024 @ 74 Hz", - "Monitor that can do 1280x1024 @ 76 Hz" -}; - -static void -monitor_configuration(void) { - int i; - char s[80]; - printf("%s", monitorintro_text); - - keypress(); - emptylines(); - - printf("%s", hsyncintro_text); - - printf(" hsync in kHz; monitor type with characteristic modes\n"); - for (i = 0; i < NU_MONITORTYPES; i++) - printf("%2d %s; %s\n", i + 1, monitortype_range[i], - monitortype_name[i]); - - printf("%2d Enter your own horizontal sync range\n", - NU_MONITORTYPES + 1); - printf("\n"); - - printf("Enter your choice (1-%d): ", NU_MONITORTYPES + 1); - getstring(s); - config_monitortype = atoi(s) - 1; - if (config_monitortype < 0) - config_monitortype = 0; - - printf("\n"); - - if (config_monitortype < NU_MONITORTYPES) - config_hsyncrange = monitortype_range[config_monitortype]; - else { - /* Custom hsync range option selected. */ - printf("%s", customhsync_text); - printf("Horizontal sync range: "); - getstring(s); - config_hsyncrange = Malloc(strlen(s) + 1); - strcpy(config_hsyncrange, s); - printf("\n"); - } - - printf("%s", vsyncintro_text); - printf("\n"); - - printf("Enter your choice: "); - getstring(s); - printf("\n"); - switch (atoi(s)) { - case 0 : - case 1 : - config_vsyncrange = "50-70"; - break; - case 2 : - config_vsyncrange = "50-90"; - break; - case 3 : - config_vsyncrange = "50-100"; - break; - case 4 : - config_vsyncrange = "40-150"; - break; - case 5 : - /* Custom vsync range option selected. */ - printf("Vertical sync range: "); - getstring(s); - config_vsyncrange = Malloc(strlen(s) + 1); - strcpy(config_vsyncrange, s); - printf("\n"); - break; - } - printf("%s", monitordescintro_text); - printf("The strings are free-form, spaces are allowed.\n"); - printf("Enter an identifier for your monitor definition: "); - getstring(s); - if (strlen(s) == 0) - config_monitoridentifier = "My Monitor"; - else { - config_monitoridentifier = Malloc(strlen(s) + 1); - strcpy(config_monitoridentifier, s); - } -} - - -/* - * Card database. - */ - -static char *cardintro_text = -"Now we must configure video card specific settings. At this point you can\n" -"choose to make a selection out of a database of video card definitions.\n" -"Because there can be variation in Ramdacs and clock generators even\n" -"between cards of the same model, it is not sensible to blindly copy\n" -"the settings (e.g. a Device section). For this reason, after you make a\n" -"selection, you will still be asked about the components of the card, with\n" -"the settings from the chosen database entry presented as a strong hint.\n" -"\n" -"The database entries include information about the chipset, what driver to\n" -"run, the Ramdac and ClockChip, and comments that will be included in the\n" -"Device section. However, a lot of definitions only hint about what driver\n" -"to run (based on the chipset the card uses) and are untested.\n" -"\n" -"If you can't find your card in the database, there's nothing to worry about.\n" -"You should only choose a database entry that is exactly the same model as\n" -"your card; choosing one that looks similar is just a bad idea (e.g. a\n" -"GemStone Snail 64 may be as different from a GemStone Snail 64+ in terms of\n" -"hardware as can be).\n" -"\n"; - -static char *cardunsupported_text = -"This card is basically UNSUPPORTED. It may only work as a generic\n" -"VGA-compatible card. If you have an "__XSERVERNAME__" version more recent than what\n" -"this card definition was based on, there's a chance that it is now\n" -"supported.\n"; - -static void -carddb_configuration(void) { - int i; - char s[80]; - card_selected = -1; - printf("%s", cardintro_text); - printf("Do you want to look at the card database? "); - getstring(s); - printf("\n"); - if (!answerisyes(s)) - return; - - /* - * Choose a database entry. - */ - if (parse_database()) { - printf("Couldn't read card database file %s.\n", - CARD_DATABASE_FILE); - keypress(); - return; - } - - i = 0; - for (;;) { - int j; - emptylines(); - for (j = i; j < i + 18 && j <= lastcard; j++) { - char *name = card[j].name, - *chipset = card[j].chipset; - - printf("%3d %-50s%s\n", j, - name ? name : "-", - chipset ? chipset : "-"); - } - printf("\n"); - printf("Enter a number to choose the corresponding card definition.\n"); - printf("Press enter for the next page, q to continue configuration.\n"); - printf("\n"); - getstring(s); - if (s[0] == 'q') - break; - if (strlen(s) == 0) { - i += 18; - if (i > lastcard) - i = 0; - continue; - } - card_selected = atoi(s); - if (card_selected >= 0 && card_selected <= lastcard) - break; - } - - /* - * Look at the selected card. - */ - if (card_selected != -1) { - char *name = card[card_selected].name, - *chipset = card[card_selected].chipset; - - printf("\nYour selected card definition:\n\n"); - printf("Identifier: %s\n", name ? name : "-"); - printf("Chipset: %s\n", chipset ? chipset : "-"); - if (!card[card_selected].driver) - card[card_selected].driver = "unknown"; - printf("Driver: %s\n", card[card_selected].driver); - - if (card[card_selected].ramdac != NULL) - printf("Ramdac: %s\n", card[card_selected].ramdac); - if (card[card_selected].dacspeed != NULL) - printf("DacSpeed: %s\n", card[card_selected].dacspeed); - if (card[card_selected].clockchip != NULL) - printf("Clockchip: %s\n", card[card_selected].clockchip); - if (card[card_selected].flags & NOCLOCKPROBE) - printf("Do NOT probe clocks or use any Clocks line.\n"); - if (card[card_selected].flags & UNSUPPORTED) - printf("%s", cardunsupported_text); -#if 0 /* Might be confusing. */ - if (strlen(card[card_selected].lines) > 0) - printf("Device section text:\n%s", - card[card_selected].lines); -#endif - printf("\n"); - keypress(); - } -} - - -/* - * Screen/video card configuration. - */ - -static char *deviceintro_text = -"Now you must give information about your video card. This will be used for\n" -"the \"Device\" section of your video card in " CONFIGNAME ".\n" -"\n"; - -static char *videomemoryintro_text = -"It is probably a good idea to use the same approximate amount as that detected\n" -"by the server you intend to use. If you encounter problems that are due to the\n" -"used server not supporting the amount memory you have, specify the maximum\n" -"amount supported by the server.\n" -"\n" -"How much video memory do you have on your video card:\n" -"\n"; - -static char *carddescintro_text = -"You must now enter a few identification/description strings, namely an\n" -"identifier, a vendor name, and a model name. Just pressing enter will fill\n" -"in default names (possibly from a card definition).\n" -"\n"; - -#if 0 -static char *devicesettingscomment_text = -"Especially for accelerated drivers, Ramdac, Dacspeed and ClockChip settings\n" -"or special options may be required in the Device section.\n" -"\n"; - -static char *ramdaccomment_text = -"The RAMDAC setting only applies to some drivers. Some RAMDAC's are\n" -"auto-detected by the server. The detection of a RAMDAC is forced by using a\n" -"Ramdac \"identifier\" line in the Device section. The identifiers are shown\n" -"at the right of the following table of RAMDAC types:\n" -"\n"; - -#define NU_RAMDACS 24 - -static char *ramdac_name[NU_RAMDACS] = { - "AT&T 20C490 (S3 and AGX servers, ARK driver)", - "AT&T 20C498/21C498/22C498 (S3, autodetected)", - "AT&T 20C409/20C499 (S3, autodetected)", - "AT&T 20C505 (S3)", - "BrookTree BT481 (AGX)", - "BrookTree BT482 (AGX)", - "BrookTree BT485/9485 (S3)", - "Sierra SC15025 (S3, AGX)", -#if XFREE86_VERSION >= 311 - "S3 GenDAC (86C708) (autodetected)", - "S3 SDAC (86C716) (autodetected)", -#else - "S3 GenDAC (86C708)", - "S3 SDAC (86C716)", -#endif - "STG-1700 (S3, autodetected)", - "STG-1703 (S3, autodetected)", - "TI 3020 (S3, autodetected)", - "TI 3025 (S3, autodetected)", - "TI 3026 (S3, autodetected)", - "IBM RGB 514 (S3, autodetected)", - "IBM RGB 524 (S3, autodetected)", - "IBM RGB 525 (S3, autodetected)", - "IBM RGB 526 (S3)", - "IBM RGB 528 (S3, autodetected)", - "ICS5342 (S3, ARK)", - "ICS5341 (W32)", - "IC Works w30C516 ZoomDac (ARK)", - "Normal DAC" -}; - -static char *ramdac_id[NU_RAMDACS] = { - "att20c490", "att20c498", "att20c409", "att20c505", "bt481", "bt482", - "bt485", "sc15025", "s3gendac", "s3_sdac", "stg1700","stg1703", - "ti3020", "ti3025", "ti3026", "ibm_rgb514", "ibm_rgb524", - "ibm_rgb525", "ibm_rgb526", "ibm_rgb528", "ics5342", "ics5341", - "zoomdac", "normal" -}; - -static char *clockchipcomment_text = -"A Clockchip line in the Device section forces the detection of a\n" -"programmable clock device. With a clockchip enabled, any required\n" -"clock can be programmed without requiring probing of clocks or a\n" -"Clocks line. Most cards don't have a programmable clock chip.\n" -"Choose from the following list:\n" -"\n"; - -#define NU_CLOCKCHIPS 12 - -static char *clockchip_name[] = { - "Chrontel 8391", - "ICD2061A and compatibles (ICS9161A, DCS2824)", - "ICS2595", - "ICS5342 (similar to SDAC, but not completely compatible)", - "ICS5341", - "S3 GenDAC (86C708) and ICS5300 (autodetected)", - "S3 SDAC (86C716)", - "STG 1703 (autodetected)", - "Sierra SC11412", - "TI 3025 (autodetected)", - "TI 3026 (autodetected)", - "IBM RGB 51x/52x (autodetected)", -}; - -static char *clockchip_id[] = { - "ch8391", "icd2061a", "ics2595", "ics5342", "ics5341", - "s3gendac", "s3_sdac", - "stg1703", "sc11412", "ti3025", "ti3026", "ibm_rgb5xx", -}; - -static char *deviceclockscomment_text = -"For most modern configurations, a Clocks line is neither required or\n" -"desirable. However for some older hardware it can be useful since it\n" -"prevents the slow and nasty sounding clock probing at server start-up.\n" -"Probed clocks are displayed at server startup, along with other server\n" -"and hardware configuration info. You can save this information in a file\n" -"by running 'X -probeonly 2>output_file'. Be warned that clock probing is\n" -"inherently imprecise; some clocks may be slightly too high (varies per run).\n" -"\n"; - -static char *deviceclocksquestion_text = -"At this point I can run X -probeonly, and try to extract the clock information\n" -"from the output. It is recommended that you do this yourself and if a set of\n" -"clocks is shown then you add a clocks line (note that the list of clocks may\n" -"be split over multiple Clocks lines) to your Device section afterwards. Be\n" -"aware that a clocks line is not appropriate for most modern hardware that\n" -"has programmable clocks.\n" -"\n" -"You must be root to be able to run X -probeonly now.\n" -"\n"; - -static char *probeonlywarning_text = -"It is possible that the hardware detection routines in the server will somehow\n" -"cause the system to crash and the screen to remain blank. If this is the\n" -"case, do not choose this option the next time. The server may need a\n" -"Ramdac, ClockChip or special option (e.g. \"nolinear\" for S3) to probe\n" -"and start-up correctly.\n" -"\n"; -#endif - -static char *modesorderintro_text = -"For each depth, a list of modes (resolutions) is defined. The default\n" -"resolution that the server will start-up with will be the first listed\n" -"mode that can be supported by the monitor and card.\n" -"Currently it is set to:\n" -"\n"; - -static char *modesorder_text2 = -"Modes that cannot be supported due to monitor or clock constraints will\n" -"be automatically skipped by the server.\n" -"\n" -" 1 Change the modes for 8-bit (256 colors)\n" -" 2 Change the modes for 16-bit (32K/64K colors)\n" -" 3 Change the modes for 24-bit (24-bit color)\n" -" 4 The modes are OK, continue.\n" -"\n"; - -static char *modeslist_text = -"Please type the digits corresponding to the modes that you want to select.\n" -"For example, 432 selects \"1024x768\" \"800x600\" \"640x480\", with a\n" -"default mode of 1024x768.\n" -"\n"; - -static char *virtual_text = -"You can have a virtual screen (desktop), which is screen area that is larger\n" -"than the physical screen and which is panned by moving the mouse to the edge\n" -"of the screen. If you don't want virtual desktop at a certain resolution,\n" -"you cannot have modes listed that are larger. Each color depth can have a\n" -"differently-sized virtual screen\n" -"\n"; - -static int videomemory[] = { - 256, 512, 1024, 2048, 4096, 8192, 16384, 32768, 65536, 131072, 262144 -}; - -/* Is this required? */ -#if XFREE86_VERSION >= 400 -#define NU_MODESTRINGS 13 -#else -#if XFREE86_VERSION >= 330 -#define NU_MODESTRINGS 12 -#else -#if XFREE86_VERSION >= 311 -#define NU_MODESTRINGS 8 -#else -#define NU_MODESTRINGS 5 -#endif -#endif -#endif - -static char *modestring[NU_MODESTRINGS] = { - "\"640x400\"", - "\"640x480\"", - "\"800x600\"", - "\"1024x768\"", - "\"1280x1024\"", -#if XFREE86_VERSION >= 311 - "\"320x200\"", - "\"320x240\"", - "\"400x300\"" -#endif -#if XFREE86_VERSION >= 330 - ,"\"1152x864\"", - "\"1600x1200\"", - "\"1800x1400\"", - "\"512x384\"" -#endif -#if XFREE86_VERSION >= 400 - ,"\"1400x1050\"" -#endif -}; - -static int exists_dir(char *name) { - struct stat sbuf; - - /* is it there ? */ - if (stat(name,&sbuf) == -1) - return 0; - - /* is there, but is it a dir? */ - return S_ISDIR(sbuf.st_mode) ? 1 : 0; -} - -static int -screen_configuration(void) { - int i, c/*, np*/; - char s[80]; - - /* - * Configure the "Device" section for the video card. - */ - - printf("%s", deviceintro_text); - - printf("%s", videomemoryintro_text); - - for (i = 0; i < sizeof(videomemory) / sizeof(videomemory[0]); i++) - printf("%2d %dK\n", i + 1, videomemory[i]); - printf("%2d Other\n\n", i + 1); - - printf("Enter your choice: "); - getstring(s); - printf("\n"); - - c = atoi(s) - 1; - if (c >= 0 && c < sizeof(videomemory) / sizeof(videomemory[0])) - config_videomemory = videomemory[c]; - else { - printf("Amount of video memory in Kbytes: "); - getstring(s); - config_videomemory = atoi(s); - printf("\n"); - } - - printf("%s", carddescintro_text); - if (card_selected != -1) - printf("Your card definition is %s.\n\n", - card[card_selected].name); - printf("The strings are free-form, spaces are allowed.\n"); - printf("Enter an identifier for your video card definition: "); - getstring(s); - if (strlen(s) == 0) - if (card_selected != -1) - config_deviceidentifier = card[card_selected].name; - else - config_deviceidentifier = "My Video Card"; - else { - config_deviceidentifier = Malloc(strlen(s) + 1); - strcpy(config_deviceidentifier, s); - } - printf("\n"); - - emptylines(); - - /* - * Initialize screen mode variables for svga and accel - * to default values. - * XXXX Doesn't leave room for off-screen caching in 16/32bpp modes - * for the accelerated servers in some situations. - */ - config_modesline8bpp = - config_modesline16bpp = - config_modesline24bpp = "\"640x480\""; - config_virtualx8bpp = config_virtualx16bpp = config_virtualx24bpp = - config_virtualy8bpp = config_virtualy16bpp = config_virtualy24bpp = 0; - if (config_videomemory >= 4096) { - config_virtualx8bpp = 1600; - config_virtualy8bpp = 1280; - if (card_selected != -1 && !(card[card_selected].flags & UNSUPPORTED)) { - /* - * Allow room for font/pixmap cache for accel - * servers. - */ - config_virtualx16bpp = 1280; - config_virtualy16bpp = 1024; - } - else { - config_virtualx16bpp = 1600; - config_virtualy16bpp = 1280; - } - if (card_selected != -1 && !(card[card_selected].flags & UNSUPPORTED)) { - config_virtualx24bpp = 1152; - config_virtualy24bpp = 900; - } - else { - config_virtualx24bpp = 1280; - config_virtualy24bpp = 1024; - } - /* Add 1600x1280 */ - config_modesline8bpp = "\"1280x1024\" \"1024x768\" \"800x600\" \"640x480\""; - config_modesline16bpp = "\"1280x1024\" \"1024x768\" \"800x600\" \"640x480\""; - config_modesline24bpp = "\"1280x1024\" \"1024x768\" \"800x600\" \"640x480\""; - - } - else - if (config_videomemory >= 2048) { - if (card_selected != -1 && !(card[card_selected].flags & UNSUPPORTED)) { - /* - * Allow room for font/pixmap cache for accel - * servers. - * Also the mach32 is has a limited width. - */ - config_virtualx8bpp = 1280; - config_virtualy8bpp = 1024; - } - else { - config_virtualx8bpp = 1600; - config_virtualy8bpp = 1200; - } - if (card_selected != -1 && !(card[card_selected].flags & UNSUPPORTED)) { - config_virtualx16bpp = 1024; - config_virtualy16bpp = 768; - } - else { - config_virtualx16bpp = 1152; - config_virtualy16bpp = 900; - } - config_virtualx24bpp = 800; - config_virtualy24bpp = 600; - if (config_videomemory >= 2048 + 256) { - config_virtualx24bpp = 1024; - config_virtualy24bpp = 768; - } - config_modesline8bpp = "\"1280x1024\" \"1024x768\" \"800x600\" \"640x480\""; - config_modesline16bpp = "\"1024x768\" \"800x600\" \"640x480\""; - if (config_videomemory >= 2048 + 256) - config_modesline24bpp = "\"1024x768\" \"800x600\" \"640x480\""; - else - config_modesline24bpp = "\"800x600\" \"640x480\""; - } - else - if (config_videomemory >= 1024) { - if (card_selected != -1 && !(card[card_selected].flags & UNSUPPORTED)) { - /* - * Allow room for font/pixmap cache for accel - * servers. - */ - config_virtualx8bpp = 1024; - config_virtualy8bpp = 768; - } - else { - config_virtualx8bpp = 1152; - config_virtualy8bpp = 900; - } - config_virtualx16bpp = 800; /* Forget about cache space; */ - config_virtualy16bpp = 600; /* it's small enough as it is. */ - config_virtualx24bpp = 640; - config_virtualy24bpp = 480; - config_modesline8bpp = "\"1024x768\" \"800x600\" \"640x480\""; - config_modesline16bpp = "\"800x600\" \"640x480\""; - config_modesline24bpp = "\"640x480\""; - } - else - if (config_videomemory >= 512) { - config_virtualx8bpp = 800; - config_virtualy8bpp = 600; - config_modesline8bpp = "\"800x600\" \"640x480\""; - config_modesline16bpp = "\"640x400\""; - } - else - if (config_videomemory >= 256) { - config_modesline8bpp = "\"640x400\""; - config_virtualx8bpp = 640; - config_virtualy8bpp = 400; - } - else { - printf("Invalid amount of video memory. Please try again\n"); - return(1); - } - -#if 0 - /* - * Handle the Ramdac/Clockchip setting. - */ - - printf("%s", devicesettingscomment_text); - - if (card_selected == -1 || (card[card_selected].flags & UNSUPPORTED)) - goto skipramdacselection; - - printf("%s", ramdaccomment_text); - - /* meanwhile there are so many RAMDACs that they do no longer fit on - * on page - */ - for (np=12, i=0 ;;) { - int j; - for (j = i; j < i + np && j < NU_RAMDACS; j++) - printf("%3d %-60s%s\n", j+1, - ramdac_name[j], - ramdac_id[j]); - - printf("\n"); - if (card_selected != -1) - if (card[card_selected].ramdac != NULL) - printf("The card definition has Ramdac \"%s\".\n\n", - card[card_selected].ramdac); - printf("\n"); - printf("Enter a number to choose the corresponding RAMDAC.\n"); - printf("Press enter for the next page, q to quit without selection of a RAMDAC.\n"); - printf("\n"); - getstring(s); - - config_ramdac = NULL; - if (s[0] == 'q') - break; - - if (strlen(s) > 0) { - c = atoi(s)-1; - if (c >= 0 && c < NU_RAMDACS) { - config_ramdac = ramdac_id[atoi(s)-1]; - break; - } - } - - i += np; - if (np==12) np = 18; /* account intro lines only displayed 1st time */ - if (i >= NU_RAMDACS) - i = 0; - emptylines(); - } - -skipramdacselection: - emptylines(); - printf("%s", clockchipcomment_text); - - for (i = 0; i < NU_CLOCKCHIPS; i++) - printf("%2d %-60s%s\n", - i + 1, clockchip_name[i], clockchip_id[i]); - - printf("\n"); - - if (card_selected != -1) - if (card[card_selected].clockchip != NULL) - printf("The card definition has Clockchip \"%s\"\n\n", - card[card_selected].clockchip); - - printf("Just press enter if you don't want a Clockchip setting.\n"); - printf("What Clockchip setting do you want (1-%d)? ", NU_CLOCKCHIPS); - - getstring(s); - config_clockchip = NULL; - if (strlen(s) > 0) - config_clockchip = clockchip_id[atoi(s) - 1]; - - emptylines(); - - /* - * Optionally run X -probeonly to figure out the clocks. - */ - - config_numberofclockslines = 0; - - printf("%s", deviceclockscomment_text); - - printf("%s", deviceclocksquestion_text); -#endif - -#if 0 - /* - * XXX Change this to check for a CLOCKPROBE flag rather than an - * NOCLOCKPROBE. - */ - if (card_selected != -1) - if (card[card_selected].flags & NOCLOCKPROBE) - printf("The card definition says to NOT probe clocks.\n"); - - if (config_clockchip != NULL) { - printf("Because you have enabled a Clockchip line, there's no need for clock\n" - "probing.\n"); - keypress(); - goto skipclockprobing; - } - - printf("Do you want me to run 'X -probeonly' now? "); - getstring(s); - printf("\n"); - if (answerisyes(s)) { - /* - * Write temporary XF86Config and run X -probeonly. - * Only allow when root. - */ - FILE *f; - char *buf; - char syscmdline[2*256+100]; /* enough */ - char *fname = NULL; - char *d2name = NULL; - char *d3name = NULL; - - if (getuid() != 0) { - printf("Sorry, you must be root to do this.\n\n"); - goto endofprobeonly; - } - printf("%s", probeonlywarning_text); - keypress(); - fname = Malloc(strlen(temp_dir) + - strlen(TEMPORARY_XF86CONFIG_FILENAME) + 1); - sprintf(fname, "%s%s", temp_dir, - TEMPORARY_XF86CONFIG_FILENAME); - d2name = Malloc(strlen(temp_dir) + strlen(DUMBCONFIG2) + 1); - sprintf(d2name, "%s%s", temp_dir, DUMBCONFIG2); - d3name = Malloc(strlen(temp_dir) + strlen(DUMBCONFIG3) + 1); - sprintf(d3name, "%s%s", temp_dir, DUMBCONFIG3); - printf("Running X -probeonly -pn -xf86config %s.\n", fname); - write_XF86Config(fname); - sync(); - /* compose a line with the real path */ - sprintf(syscmdline, "X -probeonly -pn -xf86config %s 2> %s", - fname, d2name); - - if (system(syscmdline)) { - printf("X -probeonly call failed.\n"); - printf("No Clocks line inserted.\n"); - goto clocksprobefailed; - } - /* Look for 'clocks:' (case sensitive). */ - sprintf(syscmdline, "grep clocks\\: %s > %s", d2name, d3name); - if (system(syscmdline)) { - printf("grep failed.\n"); - printf("Cannot find clocks in server output.\n"); - goto clocksprobefailed; - } - f = fopen(d3name, "r"); - buf = Malloc(8192); - /* Parse lines. */ - while (fgets(buf, 8192, f) != NULL) { - char *clks; - clks = strstr(buf, "clocks: ") + 8; - if (clks >= buf + 3 && strcmp(clks - 11, "num") == 0) - /* Reject lines with 'numclocks:'. */ - continue; - if (clks >= buf + 8 && strcpy(clks - 14, "pixel ") == 0) - /* Reject lines with 'pixel clocks:'. */ - continue; - clks[strlen(clks) - 1] = '\0'; /* Remove '\n'. */ - config_clocksline[config_numberofclockslines] = - Malloc(strlen(clks) + 1); - strcpy(config_clocksline[config_numberofclockslines], - clks); - printf("Clocks %s\n", clks); - config_numberofclockslines++; - } - fclose(f); -clocksprobefailed: - unlink(d3name); - unlink(d2name); - unlink(fname); - printf("\n"); - -endofprobeonly: - keypress(); - } -skipclockprobing: -#endif - - /* - * For vga driver, no further configuration is required. - */ - if (card_selected == -1 || (card[card_selected].flags & UNSUPPORTED)) - return (0); - - /* - * Configure the modes order. - */ - config_virtual = 0; - for (;;) { - char modes[128]; - - emptylines(); - - printf("%s", modesorderintro_text); - printf("%s for 8-bit\n", config_modesline8bpp); - printf("%s for 16-bit\n", config_modesline16bpp); - printf("%s for 24-bit\n", config_modesline24bpp); - printf("\n"); - printf("%s", modesorder_text2); - - printf("Enter your choice: "); - getstring(s); - printf("\n"); - - c = atoi(s) - 1; - if (c < 0 || c >= 3) - break; - - printf("Select modes from the following list:\n\n"); - - for (i = 0; i < NU_MODESTRINGS; i++) - printf(" %c %s\n", i < 9 ? '1' + i : - 'a' + i - 9, - modestring[i]); - printf("\n"); - - printf("%s", modeslist_text); - - printf("Which modes? "); - getstring(s); - printf("\n"); - - modes[0] = '\0'; - for (i = 0; i < strlen(s); i++) { - if ( NU_MODESTRINGS > 9 ) { - if ((s[i] < '1' || s[i] > '9') && - (s[i] < 'a' || s[i] > 'a' + NU_MODESTRINGS - 10)) { - printf("Invalid mode skipped.\n"); - continue; - } - } - else { - if (s[i] < '1' || s[i] > '0' + NU_MODESTRINGS) { - printf("Invalid mode skipped.\n"); - continue; - } - } - if (i > 0) - strcat(modes, " "); - strcat(modes, modestring[s[i] <= '9' ? s[i] - '1' : - s[i] - 'a' + 9]); - } - switch (c) { - case 0 : - config_modesline8bpp = Malloc(strlen(modes) + 1); - strcpy(config_modesline8bpp, modes); - break; - case 1 : - config_modesline16bpp = Malloc(strlen(modes) + 1); - strcpy(config_modesline16bpp, modes); - break; - case 2 : - config_modesline24bpp = Malloc(strlen(modes) + 1); - strcpy(config_modesline24bpp, modes); - break; - } - - printf("%s", virtual_text); - - printf("Please answer the following question with either 'y' or 'n'.\n"); - printf("Do you want a virtual screen that is larger than the physical screen?"); - getstring(s); - if (answerisyes(s)) - config_virtual = 1; - } - return(0); -} - -static char *defaultdepthtext = -"Please specify which color depth you want to use by default:\n" -"\n"; - -static struct depth_str { - char *name; - char *desc; -} depth_list[] = { - { "1", "1 bit (monochrome)" }, - { "4", "4 bits (16 colors)" }, - { "8", "8 bits (256 colors)" }, - { "16", "16 bits (65536 colors)" }, - { "24", "24 bits (16 million colors)" } -}; - -static int ndepths = sizeof(depth_list)/sizeof(struct depth_str); - -static void -depth_configuration(void) -{ - int i; - char s[80]; - int depth; - - printf(defaultdepthtext); - for (i=0; i<ndepths; i++) { - printf("%3d %-50s\n",i+1,depth_list[i].desc); - } - - printf("\nEnter a number to choose the default depth.\n\n"); - getstring(s); - if (strlen(s) == 0) - depth = 0; - else { - i = atoi(s)-1; - depth = (i < 0 || i > ndepths) ? 0 : i; - } - config_depth = depth_list[depth].name; -} - -/* - * Create the XF86Config file. - */ - -static char *XF86Config_firstchunk_text = -"# File generated by xorgconfig.\n" -"\n" -"#\n" -"# Copyright 2004 "XVENDORNAME"\n" -"#\n" -"# Permission is hereby granted, free of charge, to any person obtaining a\n" -"# copy of this software and associated documentation files (the \"Software\"),\n" -"# to deal in the Software without restriction, including without limitation\n" -"# the rights to use, copy, modify, merge, publish, distribute, sublicense,\n" -"# and/or sell copies of the Software, and to permit persons to whom the\n" -"# Software is furnished to do so, subject to the following conditions:\n" -"# \n" -"# The above copyright notice and this permission notice shall be included in\n" -"# all copies or substantial portions of the Software.\n" -"# \n" -"# THE SOFTWARE IS PROVIDED \"AS IS\", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR\n" -"# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,\n" -"# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL\n" -"# "XVENDORNAME" BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,\n" -"# WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF\n" -"# OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE\n" -"# SOFTWARE.\n" -"# \n" -"# Except as contained in this notice, the name of "XVENDORNAME" shall\n" -"# not be used in advertising or otherwise to promote the sale, use or other\n" -"# dealings in this Software without prior written authorization from\n" -"# "XVENDORNAME".\n" -"#\n" -"\n" -"# **********************************************************************\n" -"# Refer to the " CONFIGNAME "(" FILEMANSUFFIX ") man page for details about the format of \n" -"# this file.\n" -"# **********************************************************************\n" -"\n" -"# **********************************************************************\n" -"# Module section -- this section is used to specify\n" -"# which dynamically loadable modules to load.\n" -"# **********************************************************************\n" -"#\n" -"Section \"Module\"\n" -"\n" -"# This loads the DBE extension module.\n" -"\n" -" Load \"dbe\" # Double buffer extension\n" -"\n" -"# This loads the miscellaneous extensions module, and disables\n" -"# initialisation of the XFree86-DGA extension within that module.\n" -" SubSection \"extmod\"\n" -" Option \"omit xfree86-dga\" # don't initialise the DGA extension\n" -" EndSubSection\n" -"\n" -"# This loads the font modules\n" -#ifdef HAS_TYPE1 -" Load \"type1\"\n" -#else -"# Load \"type1\"\n" -#endif -" Load \"freetype\"\n" -"# Load \"xtt\"\n" -"\n" -"# This loads the GLX module\n" -"# Load \"glx\"\n" -"# This loads the DRI module\n" -"# Load \"dri\"\n" -"\n" -"EndSection\n" -"\n" -"# **********************************************************************\n" -"# Files section. This allows default font and rgb paths to be set\n" -"# **********************************************************************\n" -"\n" -"Section \"Files\"\n" -"\n" -"# Multiple FontPath entries are allowed (which are concatenated together),\n" -"# as well as specifying multiple comma-separated entries in one FontPath\n" -"# command (or a combination of both methods)\n" -"# \n" -"\n"; - -static char *XF86Config_fontpaths[] = -{ -/* " FontPath \"" TREEROOTFONT "/75dpi/\"\n"*/ - "/local/", - "/misc/", - "/75dpi/:unscaled", - "/100dpi/:unscaled", - "/Type1/", - "/TrueType/", - "/freefont/", - "/75dpi/", - "/100dpi/", - 0 /* end of fontpaths */ -}; - -static char *XF86Config_fontpathchunk_text = - -"\n" -"# The module search path. The default path is shown here.\n" -"\n" -"# ModulePath \"" MODULEPATH "\"\n" -"\n" -"EndSection\n" -"\n" -"# **********************************************************************\n" -"# Server flags section.\n" -"# **********************************************************************\n" -"\n" -"Section \"ServerFlags\"\n" -"\n" -"# Uncomment this to cause a core dump at the spot where a signal is \n" -"# received. This may leave the console in an unusable state, but may\n" -"# provide a better stack trace in the core dump to aid in debugging\n" -"\n" -"# Option \"NoTrapSignals\"\n" -"\n" -"# Uncomment this to disable the <Ctrl><Alt><Fn> VT switch sequence\n" -"# (where n is 1 through 12). This allows clients to receive these key\n" -"# events.\n" -"\n" -"# Option \"DontVTSwitch\"\n" -"\n" -"# Uncomment this to disable the <Ctrl><Alt><BS> server abort sequence\n" -"# This allows clients to receive this key event.\n" -"\n" -"# Option \"DontZap\"\n" -"\n" -"# Uncomment this to disable the <Ctrl><Alt><KP_+>/<KP_-> mode switching\n" -"# sequences. This allows clients to receive these key events.\n" -"\n" -"# Option \"Dont Zoom\"\n" -"\n" -"# Uncomment this to disable tuning with the xvidtune client. With\n" -"# it the client can still run and fetch card and monitor attributes,\n" -"# but it will not be allowed to change them. If it tries it will\n" -"# receive a protocol error.\n" -"\n" -"# Option \"DisableVidModeExtension\"\n" -"\n" -"# Uncomment this to enable the use of a non-local xvidtune client. \n" -"\n" -"# Option \"AllowNonLocalXvidtune\"\n" -"\n" -"# Uncomment this to disable dynamically modifying the input device\n" -"# (mouse and keyboard) settings. \n" -"\n" -"# Option \"DisableModInDev\"\n" -"\n" -"# Uncomment this to enable the use of a non-local client to\n" -"# change the keyboard or mouse settings (currently only xset).\n" -"\n" -"# Option \"AllowNonLocalModInDev\"\n" -"\n" -"EndSection\n" -"\n" -"# **********************************************************************\n" -"# Input devices\n" -"# **********************************************************************\n" -"\n" -"# **********************************************************************\n" -"# Core keyboard's InputDevice section\n" -"# **********************************************************************\n" -"\n" -"Section \"InputDevice\"\n" -"\n" -" Identifier \"Keyboard1\"\n" -" Driver \"kbd\"\n" -"\n" -" Option \"AutoRepeat\" \"500 30\"\n" -"\n" -"# Specify which keyboard LEDs can be user-controlled (eg, with xset(1))\n" -"# Option \"Xleds\" \"1 2 3\"\n" -"\n"; - -static char *keyboardchunk2_text = -"\n"; - -static char *keyboardchunk3_text = -"# To customise the XKB settings to suit your keyboard, modify the\n" -"# lines below (which are the defaults). For example, for a non-U.S.\n" -"# keyboard, you will probably want to use:\n" -"# Option \"XkbModel\" \"pc105\"\n" -"# If you have a US Microsoft Natural keyboard, you can use:\n" -"# Option \"XkbModel\" \"microsoft\"\n" -"#\n" -"# Then to change the language, change the Layout setting.\n" -"# For example, a german layout can be obtained with:\n" -"# Option \"XkbLayout\" \"de\"\n" -"# or:\n" -"# Option \"XkbLayout\" \"de\"\n" -"# Option \"XkbVariant\" \"nodeadkeys\"\n" -"#\n" -"# If you'd like to switch the positions of your capslock and\n" -"# control keys, use:\n" -"# Option \"XkbOptions\" \"ctrl:swapcaps\"\n" -"\n" -"# These are the default XKB settings for "__XSERVERNAME__"\n" -"# Option \"XkbRules\" \""__XKBDEFRULES__"\"\n" -"# Option \"XkbModel\" \"pc105\"\n" -"# Option \"XkbLayout\" \"us\"\n" -"# Option \"XkbVariant\" \"\"\n" -"# Option \"XkbOptions\" \"\"\n" -"\n"; - -static char *keyboardlastchunk_text = -"\n" -"EndSection\n" -"\n" -"\n"; - -static char *pointersection_text1 = -"# **********************************************************************\n" -"# Core Pointer's InputDevice section\n" -"# **********************************************************************\n" -"\n" -"Section \"InputDevice\"\n" -"\n" -"# Identifier and driver\n" -"\n" -#if defined(__UNIXWARE__) -"# Identifier \"Mouse1\"\n" -"# Driver \"mouse\"\n" -#else -" Identifier \"Mouse1\"\n" -" Driver \"mouse\"\n" -#endif -; - -static char *pointersection_text2 = -"\n" -"# Mouse-speed setting for PS/2 mouse.\n" -"\n" -"# Option \"Resolution\" \"256\"\n" -"\n" -"# Baudrate and SampleRate are only for some Logitech mice. In\n" -"# almost every case these lines should be omitted.\n" -"\n" -"# Option \"BaudRate\" \"9600\"\n" -"# Option \"SampleRate\" \"150\"\n" -"\n" -"# Mouse wheel mapping. Default is to map vertical wheel to buttons 4 & 5,\n" -"# horizontal wheel to buttons 6 & 7. Change if your mouse has more than\n" -"# 3 buttons and you need to map the wheel to different button ids to avoid\n" -"# conflicts.\n" -"\n" -" Option \"ZAxisMapping\" \"4 5 6 7\"\n" -"\n" -"# Emulate3Buttons is an option for 2-button mice\n" -"# Emulate3Timeout is the timeout in milliseconds (default is 50ms)\n" -"\n"; - - -static char *xinputsection_text = -"# **********************************************************************\n" -"# Other input device sections \n" -"# this is optional and is required only if you\n" -"# are using extended input devices. This is for example only. Refer\n" -"# to the " CONFIGNAME " man page for a description of the options.\n" -"# **********************************************************************\n" -"#\n" -"# Section \"InputDevice\" \n" -"# Identifier \"Mouse2\"\n" -"# Driver \"mouse\"\n" -"# Option \"Protocol\" \"MouseMan\"\n" -"# Option \"Device\" \"/dev/mouse2\"\n" -"# EndSection\n" -"#\n" -"# Section \"InputDevice\"\n" -"# Identifier \"spaceball\"\n" -"# Driver \"magellan\"\n" -"# Option \"Device\" \"/dev/cua0\"\n" -"# EndSection\n" -"#\n" -"# Section \"InputDevice\"\n" -"# Identifier \"spaceball2\"\n" -"# Driver \"spaceorb\"\n" -"# Option \"Device\" \"/dev/cua0\"\n" -"# EndSection\n" -"#\n" -"# Section \"InputDevice\"\n" -"# Identifier \"touchscreen0\"\n" -"# Driver \"microtouch\"\n" -"# Option \"Device\" \"/dev/ttyS0\"\n" -"# Option \"MinX\" \"1412\"\n" -"# Option \"MaxX\" \"15184\"\n" -"# Option \"MinY\" \"15372\"\n" -"# Option \"MaxY\" \"1230\"\n" -"# Option \"ScreenNumber\" \"0\"\n" -"# Option \"ReportingMode\" \"Scaled\"\n" -"# Option \"ButtonNumber\" \"1\"\n" -"# Option \"SendCoreEvents\"\n" -"# EndSection\n" -"#\n" -"# Section \"InputDevice\"\n" -"# Identifier \"touchscreen1\"\n" -"# Driver \"elo2300\"\n" -"# Option \"Device\" \"/dev/ttyS0\"\n" -"# Option \"MinX\" \"231\"\n" -"# Option \"MaxX\" \"3868\"\n" -"# Option \"MinY\" \"3858\"\n" -"# Option \"MaxY\" \"272\"\n" -"# Option \"ScreenNumber\" \"0\"\n" -"# Option \"ReportingMode\" \"Scaled\"\n" -"# Option \"ButtonThreshold\" \"17\"\n" -"# Option \"ButtonNumber\" \"1\"\n" -"# Option \"SendCoreEvents\"\n" -"# EndSection\n" -"\n"; - -static char *monitorsection_text1 = -"# **********************************************************************\n" -"# Monitor section\n" -"# **********************************************************************\n" -"\n" -"# Any number of monitor sections may be present\n" -"\n" -"Section \"Monitor\"\n" -"\n"; - -static char *monitorsection_text2 = -"# HorizSync is in kHz unless units are specified.\n" -"# HorizSync may be a comma separated list of discrete values, or a\n" -"# comma separated list of ranges of values.\n" -"# NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR\'S\n" -"# USER MANUAL FOR THE CORRECT NUMBERS.\n" -"\n"; - -static char *monitorsection_text3 = -"# HorizSync 30-64 # multisync\n" -"# HorizSync 31.5, 35.2 # multiple fixed sync frequencies\n" -"# HorizSync 15-25, 30-50 # multiple ranges of sync frequencies\n" -"\n" -"# VertRefresh is in Hz unless units are specified.\n" -"# VertRefresh may be a comma separated list of discrete values, or a\n" -"# comma separated list of ranges of values.\n" -"# NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR\'S\n" -"# USER MANUAL FOR THE CORRECT NUMBERS.\n" -"\n"; - -#if 0 -static char *monitorsection_text4 = -"# Modes can be specified in two formats. A compact one-line format, or\n" -"# a multi-line format.\n" -"\n" -"# These two are equivalent\n" -"\n" -"# ModeLine \"1024x768i\" 45 1024 1048 1208 1264 768 776 784 817 Interlace\n" -"\n" -"# Mode \"1024x768i\"\n" -"# DotClock 45\n" -"# HTimings 1024 1048 1208 1264\n" -"# VTimings 768 776 784 817\n" -"# Flags \"Interlace\"\n" -"# EndMode\n" -"\n"; - -static char *modelines_text = -"# This is a set of standard mode timings. Modes that are out of monitor spec\n" -"# are automatically deleted by the server (provided the HorizSync and\n" -"# VertRefresh lines are correct), so there's no immediate need to\n" -"# delete mode timings (unless particular mode timings don't work on your\n" -"# monitor). With these modes, the best standard mode that your monitor\n" -"# and video card can support for a given resolution is automatically\n" -"# used.\n" -"\n" -"# 640x400 @ 70 Hz, 31.5 kHz hsync\n" -"Modeline \"640x400\" 25.175 640 664 760 800 400 409 411 450\n" -"# 640x480 @ 60 Hz, 31.5 kHz hsync\n" -"Modeline \"640x480\" 25.175 640 664 760 800 480 491 493 525\n" -"# 800x600 @ 56 Hz, 35.15 kHz hsync\n" -"ModeLine \"800x600\" 36 800 824 896 1024 600 601 603 625\n" -"# 1024x768 @ 87 Hz interlaced, 35.5 kHz hsync\n" -"Modeline \"1024x768\" 44.9 1024 1048 1208 1264 768 776 784 817 Interlace\n" -"\n" -"# 640x400 @ 85 Hz, 37.86 kHz hsync\n" -"Modeline \"640x400\" 31.5 640 672 736 832 400 401 404 445 -HSync +VSync\n" -"# 640x480 @ 72 Hz, 36.5 kHz hsync\n" -"Modeline \"640x480\" 31.5 640 680 720 864 480 488 491 521\n" -"# 640x480 @ 75 Hz, 37.50 kHz hsync\n" -"ModeLine \"640x480\" 31.5 640 656 720 840 480 481 484 500 -HSync -VSync\n" -"# 800x600 @ 60 Hz, 37.8 kHz hsync\n" -"Modeline \"800x600\" 40 800 840 968 1056 600 601 605 628 +hsync +vsync\n" -"\n" -"# 640x480 @ 85 Hz, 43.27 kHz hsync\n" -"Modeline \"640x480\" 36 640 696 752 832 480 481 484 509 -HSync -VSync\n" -"# 1152x864 @ 89 Hz interlaced, 44 kHz hsync\n" -"ModeLine \"1152x864\" 65 1152 1168 1384 1480 864 865 875 985 Interlace\n" -"\n" -"# 800x600 @ 72 Hz, 48.0 kHz hsync\n" -"Modeline \"800x600\" 50 800 856 976 1040 600 637 643 666 +hsync +vsync\n" -"# 1024x768 @ 60 Hz, 48.4 kHz hsync\n" -"Modeline \"1024x768\" 65 1024 1032 1176 1344 768 771 777 806 -hsync -vsync\n" -"\n" -"# 640x480 @ 100 Hz, 53.01 kHz hsync\n" -"Modeline \"640x480\" 45.8 640 672 768 864 480 488 494 530 -HSync -VSync\n" -"# 1152x864 @ 60 Hz, 53.5 kHz hsync\n" -"Modeline \"1152x864\" 89.9 1152 1216 1472 1680 864 868 876 892 -HSync -VSync\n" -"# 800x600 @ 85 Hz, 55.84 kHz hsync\n" -"Modeline \"800x600\" 60.75 800 864 928 1088 600 616 621 657 -HSync -VSync\n" -"\n" -"# 1024x768 @ 70 Hz, 56.5 kHz hsync\n" -"Modeline \"1024x768\" 75 1024 1048 1184 1328 768 771 777 806 -hsync -vsync\n" -"# 1280x1024 @ 87 Hz interlaced, 51 kHz hsync\n" -"Modeline \"1280x1024\" 80 1280 1296 1512 1568 1024 1025 1037 1165 Interlace\n" -"\n" -"# 800x600 @ 100 Hz, 64.02 kHz hsync\n" -"Modeline \"800x600\" 69.65 800 864 928 1088 600 604 610 640 -HSync -VSync\n" -"# 1024x768 @ 76 Hz, 62.5 kHz hsync\n" -"Modeline \"1024x768\" 85 1024 1032 1152 1360 768 784 787 823\n" -"# 1152x864 @ 70 Hz, 62.4 kHz hsync\n" -"Modeline \"1152x864\" 92 1152 1208 1368 1474 864 865 875 895\n" -"# 1280x1024 @ 61 Hz, 64.2 kHz hsync\n" -"Modeline \"1280x1024\" 110 1280 1328 1512 1712 1024 1025 1028 1054\n" -"\n" -"# 1024x768 @ 85 Hz, 70.24 kHz hsync\n" -"Modeline \"1024x768\" 98.9 1024 1056 1216 1408 768 782 788 822 -HSync -VSync\n" -"# 1152x864 @ 78 Hz, 70.8 kHz hsync\n" -"Modeline \"1152x864\" 110 1152 1240 1324 1552 864 864 876 908\n" -"\n" -"# 1280x1024 @ 70 Hz, 74.59 kHz hsync\n" -"Modeline \"1280x1024\" 126.5 1280 1312 1472 1696 1024 1032 1040 1068 -HSync -VSync\n" -"# 1600x1200 @ 60Hz, 75.00 kHz hsync\n" -"Modeline \"1600x1200\" 162 1600 1664 1856 2160 1200 1201 1204 1250 +HSync +VSync\n" -"# 1152x864 @ 84 Hz, 76.0 kHz hsync\n" -"Modeline \"1152x864\" 135 1152 1464 1592 1776 864 864 876 908\n" -"\n" -"# 1280x1024 @ 74 Hz, 78.85 kHz hsync\n" -"Modeline \"1280x1024\" 135 1280 1312 1456 1712 1024 1027 1030 1064\n" -"\n" -"# 1024x768 @ 100Hz, 80.21 kHz hsync\n" -"Modeline \"1024x768\" 115.5 1024 1056 1248 1440 768 771 781 802 -HSync -VSync\n" -"# 1280x1024 @ 76 Hz, 81.13 kHz hsync\n" -"Modeline \"1280x1024\" 135 1280 1312 1416 1664 1024 1027 1030 1064\n" -"\n" -"# 1600x1200 @ 70 Hz, 87.50 kHz hsync\n" -"Modeline \"1600x1200\" 189 1600 1664 1856 2160 1200 1201 1204 1250 -HSync -VSync\n" -"# 1152x864 @ 100 Hz, 89.62 kHz hsync\n" -"Modeline \"1152x864\" 137.65 1152 1184 1312 1536 864 866 885 902 -HSync -VSync\n" -"# 1280x1024 @ 85 Hz, 91.15 kHz hsync\n" -"Modeline \"1280x1024\" 157.5 1280 1344 1504 1728 1024 1025 1028 1072 +HSync +VSync\n" -"# 1600x1200 @ 75 Hz, 93.75 kHz hsync\n" -"Modeline \"1600x1200\" 202.5 1600 1664 1856 2160 1200 1201 1204 1250 +HSync +VSync\n" -"# 1600x1200 @ 85 Hz, 105.77 kHz hsync\n" -"Modeline \"1600x1200\" 220 1600 1616 1808 2080 1200 1204 1207 1244 +HSync +VSync\n" -"# 1280x1024 @ 100 Hz, 107.16 kHz hsync\n" -"Modeline \"1280x1024\" 181.75 1280 1312 1440 1696 1024 1031 1046 1072 -HSync -VSync\n" -"\n" -"# 1800x1440 @ 64Hz, 96.15 kHz hsync \n" -"ModeLine \"1800X1440\" 230 1800 1896 2088 2392 1440 1441 1444 1490 +HSync +VSync\n" -"# 1800x1440 @ 70Hz, 104.52 kHz hsync \n" -"ModeLine \"1800X1440\" 250 1800 1896 2088 2392 1440 1441 1444 1490 +HSync +VSync\n" -"\n" -"# 512x384 @ 78 Hz, 31.50 kHz hsync\n" -"Modeline \"512x384\" 20.160 512 528 592 640 384 385 388 404 -HSync -VSync\n" -"# 512x384 @ 85 Hz, 34.38 kHz hsync\n" -"Modeline \"512x384\" 22 512 528 592 640 384 385 388 404 -HSync -VSync\n" -"\n" -#if XFREE86_VERSION >= 311 -"# Low-res Doublescan modes\n" -"# If your chipset does not support doublescan, you get a 'squashed'\n" -"# resolution like 320x400.\n" -"\n" -"# 320x200 @ 70 Hz, 31.5 kHz hsync, 8:5 aspect ratio\n" -"Modeline \"320x200\" 12.588 320 336 384 400 200 204 205 225 Doublescan\n" -"# 320x240 @ 60 Hz, 31.5 kHz hsync, 4:3 aspect ratio\n" -"Modeline \"320x240\" 12.588 320 336 384 400 240 245 246 262 Doublescan\n" -"# 320x240 @ 72 Hz, 36.5 kHz hsync\n" -"Modeline \"320x240\" 15.750 320 336 384 400 240 244 246 262 Doublescan\n" -"# 400x300 @ 56 Hz, 35.2 kHz hsync, 4:3 aspect ratio\n" -"ModeLine \"400x300\" 18 400 416 448 512 300 301 302 312 Doublescan\n" -"# 400x300 @ 60 Hz, 37.8 kHz hsync\n" -"Modeline \"400x300\" 20 400 416 480 528 300 301 303 314 Doublescan\n" -"# 400x300 @ 72 Hz, 48.0 kHz hsync\n" -"Modeline \"400x300\" 25 400 424 488 520 300 319 322 333 Doublescan\n" -"# 480x300 @ 56 Hz, 35.2 kHz hsync, 8:5 aspect ratio\n" -"ModeLine \"480x300\" 21.656 480 496 536 616 300 301 302 312 Doublescan\n" -"# 480x300 @ 60 Hz, 37.8 kHz hsync\n" -"Modeline \"480x300\" 23.890 480 496 576 632 300 301 303 314 Doublescan\n" -"# 480x300 @ 63 Hz, 39.6 kHz hsync\n" -"Modeline \"480x300\" 25 480 496 576 632 300 301 303 314 Doublescan\n" -"# 480x300 @ 72 Hz, 48.0 kHz hsync\n" -"Modeline \"480x300\" 29.952 480 504 584 624 300 319 322 333 Doublescan\n" -"\n" -#endif -; -#endif - -static char *devicesection_text = -"# **********************************************************************\n" -"# Graphics device section\n" -"# **********************************************************************\n" -"\n" -"# Any number of graphics device sections may be present\n" -"\n" -"# Standard VGA Device:\n" -"\n" -"Section \"Device\"\n" -" Identifier \"Standard VGA\"\n" -" VendorName \"Unknown\"\n" -" BoardName \"Unknown\"\n" -"\n" -"# The chipset line is optional in most cases. It can be used to override\n" -"# the driver's chipset detection, and should not normally be specified.\n" -"\n" -"# Chipset \"generic\"\n" -"\n" -"# The Driver line must be present. When using run-time loadable driver\n" -"# modules, this line instructs the server to load the specified driver\n" -"# module. Even when not using loadable driver modules, this line\n" -"# indicates which driver should interpret the information in this section.\n" -"\n" -" Driver \"vga\"\n" -"# The BusID line is used to specify which of possibly multiple devices\n" -"# this section is intended for. When this line isn't present, a device\n" -"# section can only match up with the primary video device. For PCI\n" -"# devices a line like the following could be used. This line should not\n" -"# normally be included unless there is more than one video device\n" -"# intalled.\n" -"\n" -"# BusID \"PCI:0:10:0\"\n" -"\n" -"# VideoRam 256\n" -"\n" -"# Clocks 25.2 28.3\n" -"\n" -"EndSection\n" -"\n" -"# Device configured by xorgconfig:\n" -"\n"; - -static char *screensection_text1 = -"# **********************************************************************\n" -"# Screen sections\n" -"# **********************************************************************\n" -"\n" -"# Any number of screen sections may be present. Each describes\n" -"# the configuration of a single screen. A single specific screen section\n" -"# may be specified from the X server command line with the \"-screen\"\n" -"# option.\n"; - -static char *serverlayout_section_text1 = -"# **********************************************************************\n" -"# ServerLayout sections.\n" -"# **********************************************************************\n" -"\n" -"# Any number of ServerLayout sections may be present. Each describes\n" -"# the way multiple screens are organised. A specific ServerLayout\n" -"# section may be specified from the X server command line with the\n" -"# \"-layout\" option. In the absence of this, the first section is used.\n" -"# When now ServerLayout section is present, the first Screen section\n" -"# is used alone.\n" -"\n" -"Section \"ServerLayout\"\n" -"\n" -"# The Identifier line must be present\n" -" Identifier \"Simple Layout\"\n" -"\n" -"# Each Screen line specifies a Screen section name, and optionally\n" -"# the relative position of other screens. The four names after\n" -"# primary screen name are the screens to the top, bottom, left and right\n" -"# of the primary screen. In this example, screen 2 is located to the\n" -"# right of screen 1.\n" -"\n"; - -static char *serverlayout_section_text2 = -"\n" -"# Each InputDevice line specifies an InputDevice section name and\n" -"# optionally some options to specify the way the device is to be\n" -"# used. Those options include \"CorePointer\", \"CoreKeyboard\" and\n" -"# \"SendCoreEvents\".\n" -"\n" -" InputDevice \"Mouse1\" \"CorePointer\"\n" -" InputDevice \"Keyboard1\" \"CoreKeyboard\"\n" -"\n" -"EndSection\n" -"\n" -"# Section \"DRI\"\n" -"# Mode 0666\n" -"# EndSection\n" -"\n"; - -static void -write_fontpath_section(FILE *f) -{ - /* this will create the Fontpath lines, but only after checking, - * that the corresponding dir exists (was THE absolute problem - * users had with XFree86/OS2 3.1.2D !) - */ - int i; - char cur[256+20],*colon, *hash; - -#ifdef COMPILEDDEFAULTFONTPATH - static const char dfp[] = COMPILEDDEFAULTFONTPATH; - const char *thisdir; - const char *nextdir; - int len; - - for (thisdir = dfp; thisdir != NULL; thisdir = nextdir) { - nextdir = strchr(thisdir, ','); - if (nextdir == NULL) { - len = strlen(thisdir); - } else { - len = nextdir - thisdir; - nextdir++; - } - if (len >= sizeof(cur)) - continue; - strncpy(cur, thisdir, len); - cur[len] = '\0'; - colon = strchr(cur+2,':'); /* OS/2: C:/...:scaled */ - if (colon) *colon = 0; - hash = exists_dir(cur) ? "" : "#"; - if (colon) *colon = ':'; - fprintf(f,"%s FontPath \"%s\"\n", hash, cur); - } -#endif - - for (i=0; XF86Config_fontpaths[i]; i++) { - strcpy(cur,TREEROOTFONT); - strcat(cur,XF86Config_fontpaths[i]); - /* remove a ':' */ - colon = strchr(cur+2,':'); /* OS/2: C:/...:scaled */ - if (colon) *colon = 0; -#ifdef COMPILEDDEFAULTFONTPATH - /* skip if we already added it as part of the default font path */ - if (strstr(dfp, cur) != NULL) - continue; -#endif - hash = exists_dir(cur) ? "" : "#"; - fprintf(f,"%s FontPath \"%s%s\"\n", - hash, - TREEROOTFONT, - XF86Config_fontpaths[i]); - } -} - -static int -write_XF86Config(char *filename) -{ - FILE *f; - - /* - * Write the file. - */ - - f = fopen(filename, "w"); - if (f == NULL) { - printf("Failed to open filename for writing.\n"); - if (getuid() != 0) - printf("Maybe you need to be root to write to the specified directory?\n"); - return(1); - } - - fprintf(f, "%s", XF86Config_firstchunk_text); - write_fontpath_section(f); - fprintf(f, "%s", XF86Config_fontpathchunk_text); - - /* - * Write keyboard section. - */ - if (config_altmeta) { - fprintf(f, " Option \"LeftAlt\" \"Meta\"\n"); - fprintf(f, " Option \"RightAlt\" \"ModeShift\"\n"); - } - else { - fprintf(f, "# Option \"LeftAlt\" \"Meta\"\n"); - fprintf(f, "# Option \"RightAlt\" \"ModeShift\"\n"); - } -#if defined(__OpenBSD__) && defined(WSCONS_SUPPORT) && !defined(PCVT_SUPPORT) - /* wscons keyoards need a protocol line */ - fprintf(f, " Option \"Protocol\" \"wskbd\"\n"); - fprintf(f, " Option \"Device\" \"%s\"\n", config_keyboard_dev); - fprintf(f, " Option \"XkbKeycodes\" \"wscons(ppc)\"\n"); -#endif - fprintf(f, "%s", keyboardchunk2_text); - - fprintf(f, "%s", keyboardchunk3_text); - if (config_xkbdisable) { - fprintf(f, " Option \"XkbDisable\"\n\n"); - } else { - fprintf(f, "# Option \"XkbDisable\"\n\n"); - } - fprintf(f, " Option \"XkbRules\" \"%s\"\n", - config_xkbrules); - fprintf(f, " Option \"XkbModel\" \"%s\"\n", - config_xkbmodel); - fprintf(f, " Option \"XkbLayout\" \"%s\"\n", - config_xkblayout); - if (config_xkbvariant) - fprintf(f, " Option \"XkbVariant\" \"%s\"\n", - config_xkbvariant); - if (config_xkboptions) - fprintf(f, " Option \"XkbOptions\" \"%s\"\n", - config_xkboptions); - - fprintf(f, "%s",keyboardlastchunk_text); - - /* - * Write pointer section. - */ - fprintf(f, "%s", pointersection_text1); - fprintf(f, " Option \"Protocol\" \"%s\"\t# %s\n", - mouse_info[config_mousetype].name, - mouse_info[config_mousetype].desc); -#if !defined(QNX4) - fprintf(f, " Option \"Device\" \"%s\"\n", config_pointerdevice); -#endif - fprintf(f, "%s", pointersection_text2); - if (!config_emulate3buttons) - fprintf(f, "#"); - fprintf(f, " Option \"Emulate3Buttons\"\n"); - fprintf(f, "# Option \"Emulate3Timeout\" \"50\"\n\n"); - fprintf(f, "# ChordMiddle is an option for some 3-button Logitech mice\n\n"); - if (!config_chordmiddle) - fprintf(f, "#"); - fprintf(f, " Option \"ChordMiddle\"\n\n"); - if (config_cleardtrrts) { - fprintf(f, " Option \"ClearDTR\"\n"); - fprintf(f, " Option \"ClearRTS\"\n\n"); - } - fprintf(f, "EndSection\n\n\n"); - - /* - * Write XInput sample section - */ - fprintf(f, "%s", xinputsection_text); - - /* - * Write monitor section. - */ - fprintf(f, "%s", monitorsection_text1); - fprintf(f, " Identifier \"%s\"\n", config_monitoridentifier); - fprintf(f, "\n"); - fprintf(f, "%s", monitorsection_text2); - fprintf(f, " HorizSync %s\n", config_hsyncrange); - fprintf(f, "\n"); - fprintf(f, "%s", monitorsection_text3); - fprintf(f, " VertRefresh %s\n", config_vsyncrange); - fprintf(f, "\n"); -#if 0 - fprintf(f, "%s", monitorsection_text4); - fprintf(f, "%s", modelines_text); -#endif - fprintf(f, "EndSection\n\n\n"); - - /* - * Write Device section. - */ - - fprintf(f, "%s", devicesection_text); - fprintf(f, "Section \"Device\"\n"); - fprintf(f, " Identifier \"%s\"\n", config_deviceidentifier); - if (card_selected != -1) { - fprintf(f, " Driver \"%s\"\n", card[card_selected].driver); - if (card[card_selected].flags & UNSUPPORTED) { - fprintf(f, " # unsupported card\n"); - } - } else { - fprintf(f, " Driver \"vga\"\n" - " # unsupported card\n"); - } - /* Rely on server to detect video memory. */ - fprintf(f, " #VideoRam %d\n", config_videomemory); - if (card_selected != -1) - /* Add comment lines from card definition. */ - fprintf(f, card[card_selected].lines); - if (config_ramdac != NULL) - fprintf(f, " Ramdac \"%s\"\n", config_ramdac); - if (card_selected != -1) - if (card[card_selected].dacspeed != NULL) - fprintf(f, " Dacspeed %s\n", - card[card_selected].dacspeed); - if (config_clockchip != NULL) - fprintf(f, " Clockchip \"%s\"\n", config_clockchip); - else - if (config_numberofclockslines == 0) - fprintf(f, " # Insert Clocks lines here if appropriate\n"); - else { - int i; - for (i = 0; i < config_numberofclockslines; i++) - fprintf(f, " Clocks %s\n", config_clocksline[i]); - } - fprintf(f, "EndSection\n\n\n"); - - /* - * Write Screen sections. - */ - - fprintf(f, "%s", screensection_text1); - - fprintf(f, - "Section \"Screen\"\n" - " Identifier \"Screen 1\"\n" - " Device \"%s\"\n" - " Monitor \"%s\"\n" - " DefaultDepth %s\n" - "\n" - " Subsection \"Display\"\n" - " Depth 8\n" - " Modes %s\n" - " ViewPort 0 0\n", - config_deviceidentifier, - config_monitoridentifier, - config_depth, - config_modesline8bpp); - if (config_virtual) - fprintf(f, " Virtual %d %d\n", - config_virtualx8bpp, config_virtualy8bpp); - fprintf(f, - " EndSubsection\n" - " Subsection \"Display\"\n" - " Depth 16\n" - " Modes %s\n" - " ViewPort 0 0\n", - config_modesline16bpp); - if (config_virtual) - fprintf(f, " Virtual %d %d\n", - config_virtualx16bpp, config_virtualy16bpp); - fprintf(f, - " EndSubsection\n" - " Subsection \"Display\"\n" - " Depth 24\n" - " Modes %s\n" - " ViewPort 0 0\n", - config_modesline24bpp); - if (config_virtual) - fprintf(f, " Virtual %d %d\n", - config_virtualx24bpp, config_virtualy24bpp); - fprintf(f, - " EndSubsection\n" - "EndSection\n" - "\n"); - - /* - * ServerLayout section - */ - - fprintf(f, serverlayout_section_text1); - /* replace with screen config */ - fprintf(f, " Screen \"Screen 1\"\n"); - - fprintf(f, serverlayout_section_text2); - - fclose(f); - return(0); -} - -static char * -append_version(char *name) -{ -#ifdef APPEND_VERSION_TO_CONFIG_NAME - char *ret = NULL; - - if (XF86_VERSION_MAJOR > 9 || XF86_VERSION_MAJOR < 0) - return name; - - ret = Malloc(strlen(name) + 2 + 1); - sprintf(ret, "%s-%d", name, XF86_VERSION_MAJOR); - free(name); - return ret; -#else - return name; -#endif -} - -/* - * Ask where to write XF86Config to. Returns filename. - */ - -static char * -ask_XF86Config_location(void) { - char s[80]; - char *filename = NULL; - - printf( -"I am going to write the " CONFIGNAME " file now. Make sure you don't accidently\n" -"overwrite a previously configured one.\n\n"); - - if (getuid() == 0) { -#ifdef PREFER_XF86CONFIG_IN_ETC - filename = Strdup("/etc/X11/" XCONFIGFILE); - filename = append_version(filename); - printf("Shall I write it to %s? ", filename); - getstring(s); - printf("\n"); - if (answerisyes(s)) - return filename; -#endif - - if (filename) - free(filename); - filename = Strdup(TREEROOTCFG "/" XCONFIGFILE); - filename = append_version(filename); - printf("Please answer the following question with either 'y' or 'n'.\n"); - printf("Shall I write it to the default location, %s? ", filename); - getstring(s); - printf("\n"); - if (answerisyes(s)) - return filename; - -#ifndef PREFER_XF86CONFIG_IN_ETC - if (filename) - free(filename); - filename = Strdup("/etc/X11/" XCONFIGFILE); - filename = append_version(filename); - printf("Shall I write it to %s? ", filename); - getstring(s); - printf("\n"); - if (answerisyes(s)) - return filename; -#endif - } - - if (filename) - free(filename); - filename = Strdup(XCONFIGFILE); - filename = append_version(filename); - printf("Do you want it written to the current directory as '%s'? ", filename); - getstring(s); - printf("\n"); - if (answerisyes(s)) { - return filename; - } - - printf("Please give a filename to write to: "); - getstring(s); - printf("\n"); - if (filename) - free(filename); - filename = Strdup(s); - return filename; -} - - -/* - * Check if an earlier version of XFree86 is installed; warn about proper - * search path order in that case. - */ - -static char *notinstalled_text = -"The directory " TREEROOT " does not exist. This probably means that you have\n" -"not yet installed the version of "__XSERVERNAME__" that this program was built\n" -"to configure. Please install "__XSERVERNAME__" "XVERSIONSTRING" before running this program,\n" -"following the instructions in the INSTALL or README that comes with the\n" -__XSERVERNAME__" distribution for your OS.\n" -"For a minimal installation it is sufficient to only install base binaries,\n" -"libraries, configuration files and a server that you want to use.\n" -"\n"; - -static char *oldxfree86_text = -"The directory '/usr/X386/bin' exists. You probably have a very old version of\n" -"XFree86 installed, but this program was built to configure "__XSERVERNAME__" "XVERSIONSTRING"\n" -"installed in '" TREEROOT "' instead of '/usr/X386'.\n" -"\n" -"It is important that the directory '" TREEROOT "' is present in your\n" -"search path, *before* any occurrence of '/usr/X386/bin'. If you have installed\n" -"X program binaries that are not in the base "__XSERVERNAME__" distribution in\n" -"'/usr/X386/bin', you can keep the directory in your path as long as it is\n" -"after '" TREEROOT "'.\n" -"\n"; - -static char *pathnote_text = -"Note that the X binary directory in your path may be a symbolic link.\n" -"In that case you could modify the symbolic link to point to the new binaries.\n" -"Example: 'rm -f /usr/bin/X11; ln -s /usr/X11R6/bin /usr/bin/X11', if the\n" -"link is '/usr/bin/X11'.\n" -"\n" -"Make sure the path is OK before continuing.\n"; - -static void -path_check(void) { - char s[80]; - int ok; - - ok = exists_dir(TREEROOT); - if (!ok) { - printf("%s", notinstalled_text); - printf("Do you want to continue? "); - getstring(s); - if (!answerisyes(s)) - exit(-1); - printf("\n"); - } - - ok = exists_dir("/usr/X386/bin"); - if (!ok) - return; - - printf("%s", oldxfree86_text); - printf("Your PATH is currently set as follows:\n%s\n\n", - getenv("PATH")); - printf("%s", pathnote_text); - keypress(); -} - - -static void -configdir_check(void) -{ - /* /etc/X11 may not exist on some systems */ - if (getuid() == 0) { - struct stat buf; - if (stat("/etc/X11", &buf) == -1 && errno == ENOENT) - mkdir("/etc/X11", 0777); - if (stat(TREEROOTCFG, &buf) == -1 && errno == ENOENT) - mkdir(TREEROOTCFG, 0777); - } -} - - -/* - * Program entry point. - */ - -int -main(int argc, char *argv[]) { - - createtmpdir(); - - emptylines(); - - printf("%s", intro_text); - - keypress(); - emptylines(); - - path_check(); - - emptylines(); - - configdir_check(); - - emptylines(); - - mouse_configuration(); - - emptylines(); - - keyboard_configuration(); - - emptylines(); - - monitor_configuration(); - - emptylines(); - - carddb_configuration(); - - emptylines(); - - while(screen_configuration()){}; - - emptylines(); - - depth_configuration(); - - emptylines(); - - while(write_XF86Config(ask_XF86Config_location())){}; - - printf("%s", finalcomment_text); - - exit(0); -} |