1 files changed, 2485 insertions, 2478 deletions
diff --git a/xorg-server/hw/xfree86/man/xorg.conf.man b/xorg-server/hw/xfree86/man/xorg.conf.man
index e3fd0eadf..ce0c177bc 100644
--- a/xorg-server/hw/xfree86/man/xorg.conf.man
+++ b/xorg-server/hw/xfree86/man/xorg.conf.man
@@ -1,2478 +1,2485 @@
-.\" shorthand for double quote that works everywhere.
-.ds q \N'34'
-.TH __xconfigfile__ __filemansuffix__ __vendorversion__
-.SH NAME
-__xconfigfile__ and __xconfigdir__ \- configuration files for
-__xservername__ X server
-.SH INTRODUCTION
-.B __xservername__
-supports several mechanisms for supplying/obtaining configuration and
-run-time parameters: command line options, environment variables, the
-__xconfigfile__ and __xconfigdir__ configuration files, auto-detection,
-and fallback defaults. When the same information is supplied in more
-than one way, the highest precedence mechanism is used. The list of
-mechanisms is ordered from highest precedence to lowest. Note that not
-all parameters can be supplied via all methods. The available command
-line options and environment variables (and some defaults) are
-described in the Xserver(__appmansuffix__) and
-__xservername__(__appmansuffix__) manual pages. Most configuration file
-parameters, with their defaults, are described below. Driver and module
-specific configuration parameters are described in the relevant driver
-or module manual page.
-.SH DESCRIPTION
-.B __xservername__
-uses a configuration file called
-.I __xconfigfile__
-and files ending in the suffix
-.I .conf
-from the directory
-.I __xconfigdir__
-for its initial setup.
-The
-.I __xconfigfile__
-configuration file is searched for in the following places when the
-server is started as a normal user:
-.PP
-.RS 4
-.nf
-.IR /etc/X11/ <cmdline>
-.IR __projectroot__/etc/X11/ <cmdline>
-.IB /etc/X11/ $XORGCONFIG
-.IB __projectroot__/etc/X11/ $XORGCONFIG
-.I /etc/X11/__xconfigfile__
-.I /etc/__xconfigfile__
-.IR __projectroot__/etc/X11/__xconfigfile__. <hostname>
-.I __projectroot__/etc/X11/__xconfigfile__
-.IR __projectroot__/lib/X11/__xconfigfile__. <hostname>
-.I __projectroot__/lib/X11/__xconfigfile__
-.fi
-.RE
-.PP
-where
-.I <cmdline>
-is a relative path (with no \(lq..\(rq components) specified with the
-.B \-config
-command line option,
-.B $XORGCONFIG
-is the relative path (with no \(lq..\(rq components) specified by that
-environment variable, and
-.I <hostname>
-is the machine's hostname as reported by
-.BR gethostname (__libmansuffix__).
-.PP
-When the __xservername__ server is started by the \(lqroot\(rq user, the config file
-search locations are as follows:
-.PP
-.RS 4
-.nf
-<cmdline>
-.IR /etc/X11/ <cmdline>
-.IR __projectroot__/etc/X11/ <cmdline>
-.B $XORGCONFIG
-.IB /etc/X11/ $XORGCONFIG
-.IB __projectroot__/etc/X11/ $XORGCONFIG
-.I /etc/X11/__xconfigfile__
-.I /etc/__xconfigfile__
-.IR __projectroot__/etc/X11/__xconfigfile__. <hostname>
-.I __projectroot__/etc/X11/__xconfigfile__
-.IR __projectroot__/lib/X11/__xconfigfile__. <hostname>
-.I __projectroot__/lib/X11/__xconfigfile__
-.fi
-.RE
-.PP
-where
-.I <cmdline>
-is the path specified with the
-.B \-config
-command line option (which may be absolute or relative),
-.B $XORGCONFIG
-is the path specified by that
-environment variable (absolute or relative),
-.B $HOME
-is the path specified by that environment variable (usually the home
-directory), and
-.I <hostname>
-is the machine's hostname as reported by
-.BR gethostname (__libmansuffix__).
-.PP
-Additional configuration files are searched for in the following
-directories when the server is started as a normal user:
-.PP
-.RS 4
-.nf
-.IR /etc/X11/ <cmdline>
-.IR __sysconfdir__/X11/ <cmdline>
-.I /etc/X11/__xconfigdir__
-.I __sysconfdir__/X11/__xconfigdir__
-.fi
-.RE
-.PP
-where
-.I <cmdline>
-is a relative path (with no \(lq..\(rq components) specified with the
-.B \-configdir
-command line option.
-.PP
-When the __xservername__ server is started by the \(lqroot\(rq user, the
-config directory search locations are as follows:
-.PP
-.RS 4
-.nf
-<cmdline>
-.IR /etc/X11/ <cmdline>
-.IR __sysconfdir__/X11/ <cmdline>
-.I /etc/X11/__xconfigdir__
-.I __sysconfdir__/X11/__xconfigdir__
-.fi
-.RE
-.PP
-where
-.I <cmdline>
-is the path specified with the
-.B \-configdir
-command line option (which may be absolute or relative).
-.PP
-Finally, configuration files will also be searched for in directories
-reserved for system use. These are to separate configuration files from
-the vendor or 3rd party packages from those of local administration.
-These files are found in the following directories:
-.PP
-.RS 4
-.nf
-.I /usr/share/X11/__xconfigdir__
-.I __datadir__/X11/__xconfigdir__
-.fi
-.RE
-.PP
-The
-.I __xconfigfile__
-and
-.I __xconfigdir__
-files are composed of a number of sections which may be present in any order,
-or omitted to use default configuration values.
-Each section has the form:
-.PP
-.RS 4
-.nf
-.BI "Section  \*q" SectionName \*q
-.RI "    " SectionEntry
-    ...
-.B EndSection
-.fi
-.RE
-.PP
-The section names are:
-.PP
-.RS 4
-.nf
-.BR "Files          " "File pathnames"
-.BR "ServerFlags    " "Server flags"
-.BR "Module         " "Dynamic module loading"
-.BR "Extensions     " "Extension enabling"
-.BR "InputDevice    " "Input device description"
-.BR "InputClass     " "Input class description"
-.BR "Device         " "Graphics device description"
-.BR "VideoAdaptor   " "Xv video adaptor description"
-.BR "Monitor        " "Monitor description"
-.BR "Modes          " "Video modes descriptions"
-.BR "Screen         " "Screen configuration"
-.BR "ServerLayout   " "Overall layout"
-.BR "DRI            " "DRI\-specific configuration"
-.BR "Vendor         " "Vendor\-specific configuration"
-.fi
-.RE
-.PP
-The following obsolete section names are still recognised for compatibility
-purposes.
-In new config files, the
-.B InputDevice
-section should be used instead.
-.PP
-.RS 4
-.nf
-.BR "Keyboard       " "Keyboard configuration"
-.BR "Pointer        " "Pointer/mouse configuration"
-.fi
-.RE
-.PP
-The old
-.B XInput
-section is no longer recognised.
-.PP
-The
-.B ServerLayout
-sections are at the highest level.
-They bind together the input and output devices that will be used in a session.
-The input devices are described in the
-.B InputDevice
-sections.
-Output devices usually consist of multiple independent components (e.g.,
-a graphics board and a monitor).
-These multiple components are bound together in the
-.B Screen
-sections, and it is these that are referenced by the
-.B ServerLayout
-section.
-Each
-.B Screen
-section binds together a graphics board and a monitor.
-The graphics boards are described in the
-.B Device
-sections, and the monitors are described in the
-.B Monitor
-sections.
-.PP
-Config file keywords are case\-insensitive, and \(lq_\(rq characters are
-ignored.
-Most strings (including
-.B Option
-names) are also case-insensitive, and insensitive to white space and
-\(lq_\(rq characters.
-.PP
-Each config file entry usually takes up a single line in the file.  They
-consist of a keyword, which is possibly followed by one or more arguments,
-with the number and types of the arguments depending on the keyword.
-The argument types are:
-.PP
-.RS 4
-.nf
-.BR "Integer     " "an integer number in decimal, hex or octal"
-.BR "Real        " "a floating point number"
-.BR "String      " "a string enclosed in double quote marks (\*q)"
-.fi
-.RE
-.PP
-Note: hex integer values must be prefixed with \(lq0x\(rq, and octal values
-with \(lq0\(rq.
-.PP
-A special keyword called
-.B Option
-may be used to provide free\-form data to various components of the server.
-The
-.B Option
-keyword takes either one or two string arguments.
-The first is the option name, and the optional second argument is the
-option value.
-Some commonly used option value types include:
-.PP
-.RS 4
-.nf
-.BR "Integer     " "an integer number in decimal, hex or octal"
-.BR "Real        " "a floating point number"
-.BR "String      " "a sequence of characters"
-.BR "Boolean     " "a boolean value (see below)"
-.BR "Frequency   " "a frequency value (see below)"
-.fi
-.RE
-.PP
-Note that
-.I all
-.B Option
-values, not just strings, must be enclosed in quotes.
-.PP
-Boolean options may optionally have a value specified.
-When no value is specified, the option's value is
-.BR TRUE .
-The following boolean option values are recognised as
-.BR TRUE :
-.PP
-.RS 4
-.BR 1 ,
-.BR on ,
-.BR true ,
-.B yes
-.RE
-.PP
-and the following boolean option values are recognised as
-.BR FALSE :
-.PP
-.RS 4
-.BR 0 ,
-.BR off ,
-.BR false ,
-.B no
-.RE
-.PP
-If an option name is prefixed with
-.RB \*q No \*q,
-then the option value is negated.
-.PP
-Example: the following option entries are equivalent:
-.PP
-.RS 4
-.nf
-.B "Option \*qAccel\*q   \*qOff\*q"
-.B "Option \*qNoAccel\*q"
-.B "Option \*qNoAccel\*q \*qOn\*q"
-.B "Option \*qAccel\*q   \*qfalse\*q"
-.B "Option \*qAccel\*q   \*qno\*q"
-.fi
-.RE
-.PP
-Frequency option values consist of a real number that is optionally
-followed by one of the following frequency units:
-.PP
-.RS 4
-.BR Hz ,
-.BR k ,
-.BR kHz ,
-.BR M ,
-.B MHz
-.RE
-.PP
-When the unit name is omitted, the correct units will be determined from
-the value and the expectations of the appropriate range of the value.
-It is recommended that the units always be specified when using frequency
-option values to avoid any errors in determining the value.
-.SH "FILES SECTION"
-The
-.B Files
-section is used to specify some path names required by the server.
-Some of these paths can also be set from the command line (see
-.BR Xserver (__appmansuffix__)
-and
-.BR __xservername__ (__appmansuffix__)).
-The command line settings override the values specified in the config
-file.
-The
-.B Files
-section is optional, as are all of the entries that may appear in it.
-.PP
-The entries that can appear in this section are:
-.TP 7
-.BI "FontPath \*q" path \*q
-sets the search path for fonts.
-This path is a comma separated list of font path elements which the __xservername__
-server searches for font databases.
-Multiple
-.B FontPath
-entries may be specified, and they will be concatenated to build up the
-fontpath used by the server.  Font path elements can be absolute
-directory paths, catalogue directories or a font server identifier. The
-formats of the later two are explained below:
-.PP
-.RS 7
-Catalogue directories:
-.PP
-.RS 4
-Catalogue directories can be specified using the prefix \fBcatalogue:\fR
-before the directory name. The directory can then be populated with
-symlinks pointing to the real font directories, using the following
-syntax in the symlink name:
-.PP
-.RS 4
-.IR <identifier> : [attribute]: pri= <priority>
-.RE
-.PP
-where
-.I <identifier>
-is an alphanumeric identifier,
-.I [attribute]
-is an attribute which will be passed to the underlying FPE and
-.I <priority>
-is a number used to order the fontfile FPEs. Examples:
-.PP
-.RS 4
-.nf
-.I 75dpi:unscaled:pri=20  -> /usr/share/X11/fonts/75dpi
-.I gscript:pri=60 -> /usr/share/fonts/default/ghostscript
-.I misc:unscaled:pri=10 \-> /usr/share/X11/fonts/misc
-.fi
-.PP
-.RE .RE .RE
-.PP
-.RS 7
-Font server identifiers:
-.PP
-.RS 4
-Font server identifiers have the form:
-.RS 4
-.PP
-.IR <trans> / <hostname> : <port\-number>
-.RE
-.PP
-where
-.I <trans>
-is the transport type to use to connect to the font server (e.g.,
-.B unix
-for UNIX\-domain sockets or
-.B tcp
-for a TCP/IP connection),
-.I <hostname>
-is the hostname of the machine running the font server, and
-.I <port\-number>
-is the port number that the font server is listening on (usually 7100).
-.RE
-.PP
-When this entry is not specified in the config file, the server falls back
-to the compiled\-in default font path, which contains the following
-font path elements (which can be set inside a catalogue directory):
-.PP
-.RS 4
-.nf
-.I __datadir__/fonts/X11/misc/
-.I __datadir__/fonts/X11/TTF/
-.I __datadir__/fonts/X11/OTF/
-.I __datadir__/fonts/X11/Type1/
-.I __datadir__/fonts/X11/100dpi/
-.I __datadir__/fonts/X11/75dpi/
-.fi
-.RE
-.PP
-Font path elements that are found to be invalid are removed from the
-font path when the server starts up.
-.RE
-.TP 7
-.BI "ModulePath \*q" path \*q
-sets the search path for loadable __xservername__ server modules.
-This path is a comma separated list of directories which the __xservername__ server
-searches for loadable modules loading in the order specified.
-Multiple
-.B ModulePath
-entries may be specified, and they will be concatenated to build the
-module search path used by the server.  The default module path is
-.PP
-.RS 11
-__modulepath__
-.RE
-.\" The LogFile keyword is not currently implemented
-.ig
-.TP 7
-.BI "LogFile \*q" path \*q
-sets the name of the __xservername__ server log file.
-The default log file name is
-.PP
-.RS 11
-.RI __logdir__/__xservername__. <n> .log
-.RE
-.PP
-.RS 7
-where
-.I <n>
-is the display number for the __xservername__ server.
-..
-.TP 7
-.BI "XkbDir \*q" path \*q
-sets the base directory for keyboard layout files.  The
-.B \-xkbdir
-command line option can be used to override this.  The default directory is
-.PP
-.RS 11
-__xkbdir__
-.RE
-.SH "SERVERFLAGS SECTION"
-In addition to options specific to this section (described below), the
-.B ServerFlags
-section is used to specify some global
-__xservername__ server options.
-All of the entries in this section are
-.BR Options ,
-although for compatibility purposes some of the old style entries are
-still recognised.
-Those old style entries are not documented here, and using them is
-discouraged.
-The
-.B ServerFlags
-section is optional, as are the entries that may be specified in it.
-.PP
-.B Options
-specified in this section (with the exception of the
-.B \*qDefaultServerLayout\*q
-.BR Option )
-may be overridden by
-.B Options
-specified in the active
-.B ServerLayout
-section.
-Options with command line equivalents are overridden when their command
-line equivalent is used.
-The options recognised by this section are:
-.TP 7
-.BI "Option \*qDefaultServerLayout\*q  \*q" layout\-id \*q
-This specifies the default
-.B ServerLayout
-section to use in the absence of the
-.B \-layout
-command line option.
-.TP 7
-.BI "Option \*qNoTrapSignals\*q  \*q" boolean \*q
-This prevents the __xservername__ server from trapping a range of unexpected fatal
-signals and exiting cleanly.
-Instead, the __xservername__ server will die and drop core where the fault occurred.
-The default behaviour is for the __xservername__ server to exit cleanly, but still drop a
-core file.
-In general you never want to use this option unless you are debugging an __xservername__
-server problem and know how to deal with the consequences.
-.TP 7
-.BI "Option \*qUseSIGIO\*q  \*q" boolean \*q
-This controls whether the __xservername__ server requests that events from
-input devices be reported via a SIGIO signal handler (also known as SIGPOLL
-on some platforms), or only reported via the standard select(3) loop.
-The default behaviour is platform specific.   In general you do not want to
-use this option unless you are debugging the __xservername__ server, or
-working around a specific bug until it is fixed, and understand the
-consequences.
-.TP 7
-.BI "Option \*qDontVTSwitch\*q  \*q" boolean \*q
-This disallows the use of the
-.BI Ctrl+Alt+F n
-sequence (where
-.RI F n
-refers to one of the numbered function keys).
-That sequence is normally used to switch to another \*qvirtual terminal\*q
-on operating systems that have this feature.
-When this option is enabled, that key sequence has no special meaning and
-is passed to clients.
-Default: off.
-.TP 7
-.BI "Option \*qDontZap\*q  \*q" boolean \*q
-This disallows the use of the
-.B Terminate_Server
-XKB action (usually on Ctrl+Alt+Backspace, depending on XKB options).
-This action is normally used to terminate the __xservername__ server.
-When this option is enabled, the action has no effect.
-Default: off.
-.TP 7
-.BI "Option \*qDontZoom\*q  \*q" boolean \*q
-This disallows the use of the
-.B Ctrl+Alt+Keypad\-Plus
-and
-.B Ctrl+Alt+Keypad\-Minus
-sequences.
-These sequences allows you to switch between video modes.
-When this option is enabled, those key sequences have no special meaning
-and are passed to clients.
-Default: off.
-.TP 7
-.BI "Option \*qDisableVidModeExtension\*q  \*q" boolean \*q
-This disables the parts of the VidMode extension used by the xvidtune client
-that can be used to change the video modes.
-Default: the VidMode extension is enabled.
-.TP 7
-.BI "Option \*qAllowNonLocalXvidtune\*q  \*q" boolean \*q
-This allows the xvidtune client (and other clients that use the VidMode
-extension) to connect from another host.
-Default: off.
-.TP 7
-.BI "Option \*qAllowMouseOpenFail\*q  \*q" boolean \*q
-This tells the mousedrv(__drivermansuffix__) and vmmouse(__drivermansuffix__)
-drivers to not report failure if the mouse device can't be opened/initialised.
-It has no effect on the evdev(__drivermansuffix__) or other drivers.
-Default: false.
-.TP 7
-.BI "Option \*qVTSysReq\*q  \*q" boolean \*q
-enables the SYSV\-style VT switch sequence for non\-SYSV systems
-which support VT switching.
-This sequence is
-.B Alt\-SysRq
-followed by a function key
-.RB ( Fn ).
-This prevents the __xservername__ server trapping the
-keys used for the default VT switch sequence, which means that clients can
-access them.
-Default: off.
-.TP 7
-.BI "Option \*qBlankTime\*q  \*q" time \*q
-sets the inactivity timeout for the
-.B blank
-phase of the screensaver.
-.I time
-is in minutes.
-This is equivalent to the __xservername__ server's
-.B \-s
-flag, and the value can be changed at run\-time with
-.BR xset(__appmansuffix__).
-Default: 10 minutes.
-.TP 7
-.BI "Option \*qStandbyTime\*q  \*q" time \*q
-sets the inactivity timeout for the
-.B standby
-phase of DPMS mode.
-.I time
-is in minutes, and the value can be changed at run\-time with
-.BR xset(__appmansuffix__).
-Default: 10 minutes.
-This is only suitable for VESA DPMS compatible monitors, and may not be
-supported by all video drivers.
-It is only enabled for screens that have the
-.B \*qDPMS\*q
-option set (see the MONITOR section below).
-.TP 7
-.BI "Option \*qSuspendTime\*q  \*q" time \*q
-sets the inactivity timeout for the
-.B suspend
-phase of DPMS mode.
-.I time
-is in minutes, and the value can be changed at run\-time with
-.BR xset(__appmansuffix__).
-Default: 10 minutes.
-This is only suitable for VESA DPMS compatible monitors, and may not be
-supported by all video drivers.
-It is only enabled for screens that have the
-.B \*qDPMS\*q
-option set (see the MONITOR section below).
-.TP 7
-.BI "Option \*qOffTime\*q  \*q" time \*q
-sets the inactivity timeout for the
-.B off
-phase of DPMS mode.
-.I time
-is in minutes, and the value can be changed at run\-time with
-.BR xset(__appmansuffix__).
-Default: 10 minutes.
-This is only suitable for VESA DPMS compatible monitors, and may not be
-supported by all video drivers.
-It is only enabled for screens that have the
-.B \*qDPMS\*q
-option set (see the MONITOR section below).
-.TP 7
-.BI "Option \*qPixmap\*q  \*q" bpp \*q
-This sets the pixmap format to use for depth 24.
-Allowed values for
-.I bpp
-are 24 and 32.
-Default: 32 unless driver constraints don't allow this (which is rare).
-Note: some clients don't behave well when this value is set to 24.
-.TP 7
-.BI "Option \*qPC98\*q  \*q" boolean \*q
-Specify that the machine is a Japanese PC\-98 machine.
-This should not be enabled for anything other than the Japanese\-specific
-PC\-98 architecture.
-Default: auto\-detected.
-.TP 7
-.BI "Option \*qNoPM\*q  \*q" boolean \*q
-Disables something to do with power management events.
-Default: PM enabled on platforms that support it.
-.TP 7
-.BI "Option \*qXinerama\*q  \*q" boolean \*q
-enable or disable XINERAMA extension.
-Default is disabled.
-.TP 7
-.BI "Option \*qAIGLX\*q \*q" boolean \*q
-enable or disable AIGLX. AIGLX is enabled by default.
-.TP 7
-.BI "Option \*qDRI2\*q \*q" boolean \*q
-enable or disable DRI2. DRI2 is disabled by default.
-.TP 7
-.BI "Option \*qGlxVisuals\*q \*q" string \*q
-This option controls how many GLX visuals the GLX modules sets up.
-The default value is
-.BR "typical" ,
-which will setup up a typical subset of
-the GLXFBConfigs provided by the driver as GLX visuals.  Other options are
-.BR "minimal" ,
-which will set up the minimal set allowed by the GLX specification and
-.BR "all"
-which will setup GLX visuals for all GLXFBConfigs.
-.TP 7
-.BI "Option \*qUseDefaultFontPath\*q \*q" boolean \*q
-Include the default font path even if other paths are specified in
-xorg.conf. If enabled, other font paths are included as well. Enabled by
-default.
-.TP 7
-.BI "Option \*qIgnoreABI\*q \*q" boolean \*q
-Allow modules built for a different, potentially incompatible version of
-the X server to load. Disabled by default.
-.TP 7
-.BI "Option \*qAutoAddDevices\*q \*q" boolean \*q
-If this option is disabled, then no devices will be added from HAL events.
-Enabled by default.
-.TP 7
-.BI "Option \*qAutoEnableDevices\*q \*q" boolean \*q
-If this option is disabled, then the devices will be added (and the
-DevicePresenceNotify event sent), but not enabled, thus leaving policy up
-to the client.
-Enabled by default.
-.TP 7
-.BI "Option \*qLog\*q \*q" string \*q
-This option controls whether the log is flushed and/or synced to disk after
-each message.
-Possible values are
-.B flush
-or
-.BR sync .
-Unset by default.
-.SH "MODULE SECTION"
-The
-.B Module
-section is used to specify which __xservername__ server modules should be loaded.
-This section is ignored when the __xservername__ server is built in static form.
-The type of modules normally loaded in this section are __xservername__ server
-extension modules.
-Most other module types are loaded automatically when they are needed via
-other mechanisms.
-The
-.B Module
-section is optional, as are all of the entries that may be specified in
-it.
-.PP
-Entries in this section may be in two forms.
-The first and most commonly used form is an entry that uses the
-.B Load
-keyword, as described here:
-.TP 7
-.BI "Load  \*q" modulename \*q
-This instructs the server to load the module called
-.IR modulename .
-The module name given should be the module's standard name, not the
-module file name.
-The standard name is case\-sensitive, and does not include the \(lqlib\(rq
-prefix, or the \(lq.a\(rq, \(lq.o\(rq, or \(lq.so\(rq suffixes.
-.PP
-.RS 7
-Example: the DRI extension module can be loaded with the following entry:
-.PP
-.RS 4
-.B "Load \*qdri\*q"
-.RE
-.RE
-.TP 7
-.BI "Disable  \*q" modulename \*q
-This instructs the server to not load the module called
-.IR modulename .
-Some modules are loaded by default in the server, and this overrides that
-default. If a
-.B Load
-instruction is given for the same module, it overrides the
-.B Disable
-instruction and the module is loaded. The module name given should be the
-module's standard name, not the module file name. As with the
-.B Load
-instruction, the standard name is case-sensitive, and does not include the
-"lib" prefix, or the ".a", ".o", or ".so" suffixes.
-.PP
-The second form of entry is a
-.BR SubSection,
-with the subsection name being the module name, and the contents of the
-.B SubSection
-being
-.B Options
-that are passed to the module when it is loaded.
-.PP
-Example: the extmod module (which contains a miscellaneous group of
-server extensions) can be loaded, with the XFree86\-DGA extension
-disabled by using the following entry:
-.PP
-.RS 4
-.nf
-.B "SubSection \*qextmod\*q"
-.B "   Option  \*qomit XFree86\-DGA\*q"
-.B EndSubSection
-.fi
-.RE
-.PP
-Modules are searched for in each directory specified in the
-.B ModulePath
-search path, and in the drivers, extensions, input, internal, and
-multimedia subdirectories of each of those directories.
-In addition to this, operating system specific subdirectories of all
-the above are searched first if they exist.
-.PP
-To see what extension modules are available, check the extensions
-subdirectory under:
-.PP
-.RS 4
-.nf
-__modulepath__
-.fi
-.RE
-.PP
-The \(lqextmod\(rq, \(lqdbe\(rq, \(lqdri\(rq, \(lqdri2\(rq, \(lqglx\(rq,
-and \(lqrecord\(rq extension modules are loaded automatically, if they
-are present, unless disabled with \*qDisable\*q entries.
-It is recommended
-that at very least the \(lqextmod\(rq extension module be loaded.
-If it isn't, some commonly used server extensions (like the SHAPE
-extension) will not be available.
-.SH "EXTENSIONS SECTION"
-The
-.B Extensions
-section is used to specify which X11 protocol extensions should be enabled
-or disabled.
-The
-.B Extensions
-section is optional, as are all of the entries that may be specified in
-it.
-.PP
-Entries in this section are listed as Option statements with the name of
-the extension as the first argument, and a boolean value as the second.
-The extension name is case\-sensitive, and matches the form shown in the output
-of \*qXorg -extension ?\*q.
-.PP
-.RS 7
-Example: the MIT-SHM extension can be disabled with the following entry:
-.PP
-.RS 4
-.nf
-.B "Section \*qExtensions\*q"
-.B "    Option \*qMIT-SHM\*q \*qDisable\*q"
-.B "EndSection"
-.fi
-.RE
-.RE
-.SH "INPUTDEVICE SECTION"
-The config file may have multiple
-.B InputDevice
-sections.
-Recent X servers employ input hotplugging to add input devices, with the HAL
-backend being the default backend for X servers since 1.4. It is usually not
-necessary to provide
-.B InputDevice
-sections in the xorg.conf if hotplugging is enabled.
-.PP
-If hotplugging is disabled, there will normally
-be at least two: one for the core (primary) keyboard
-and one for the core pointer.
-If either of these two is missing, a default configuration for the missing
-ones will be used. In the absence of an explicitly specified core input
-device, the first
-.B InputDevice
-marked as
-.B CorePointer
-(or
-.BR CoreKeyboard )
-is used.
-If there is no match there, the first
-.B InputDevice
-that uses the \(lqmouse\(rq (or \(lqkbd\(rq) driver is used.
-The final fallback is to use built\-in default configurations.
-Currently the default configuration may not work as expected on all platforms.
-.PP
-.B InputDevice
-sections have the following format:
-.PP
-.RS 4
-.nf
-.B  "Section \*qInputDevice\*q"
-.BI "    Identifier \*q" name \*q
-.BI "    Driver     \*q" inputdriver \*q
-.I  "    options"
-.I  "    ..."
-.B  "EndSection"
-.fi
-.RE
-.PP
-The
-.B Identifier
-and
-.B Driver
-entries are required in all
-.B InputDevice
-sections.
-All other entries are optional.
-.PP
-The
-.B Identifier
-entry specifies the unique name for this input device.
-The
-.B Driver
-entry specifies the name of the driver to use for this input device.
-When using the loadable server, the input driver module
-.RI \*q inputdriver \*q
-will be loaded for each active
-.B InputDevice
-section.
-An
-.B InputDevice
-section is considered active if it is referenced by an active
-.B ServerLayout
-section, if it is referenced by the
-.B \-keyboard
-or
-.B \-pointer
-command line options, or if it is selected implicitly as the core pointer
-or keyboard device in the absence of such explicit references.
-The most commonly used input drivers are
-.BR evdev (__drivermansuffix__)
-on Linux systems, and
-.BR kbd (__drivermansuffix__)
-and
-.BR mousedrv (__drivermansuffix__)
-on other platforms.
-.PP
-.PP
-.B InputDevice
-sections recognise some driver\-independent
-.BR Options ,
-which are described here.
-See the individual input driver manual pages for a description of the
-device\-specific options.
-.TP 7
-.BI "Option \*qAutoServerLayout\*q  \*q" boolean \*q
-Always add the device to the ServerLayout section used by this instance of
-the server. This affects implied layouts as well as explicit layouts
-specified in the configuration and/or on the command line.
-.TP 7
-.BI "Option \*qCorePointer\*q"
-Deprecated, see
-.B Floating
-.TP 7
-.BI "Option \*qCoreKeyboard\*q"
-Deprecated, see
-.B Floating
-.TP 7
-.BI "Option \*qAlwaysCore\*q  \*q" boolean \*q
-Deprecated, see
-.B Floating
-.TP 7
-.BI "Option \*qSendCoreEvents\*q  \*q" boolean \*q
-Deprecated, see
-.B Floating
-
-.TP 7
-.BI "Option \*qFloating\*q  \*q" boolean \*q
-When enabled, the input device is set up floating and does not
-report events through any master device or control a cursor. The device is
-only available to clients using the X Input Extension API. This option is
-disabled by default.
-The options
-.B CorePointer,
-.B CoreKeyboard,
-.B AlwaysCore,
-and
-.B SendCoreEvents,
-are the inverse of option
-.B Floating
-(i.e.
-.B SendCoreEvents \*qon\*q
-is equivalent to
-.B Floating \*qoff\*q
-).
-
-This option controls the startup behavior only, a device
-may be reattached or set floating at runtime.
-.PP
-For pointing devices, the following options control how the pointer
-is accelerated or decelerated with respect to physical device motion. Most of
-these can be adjusted at runtime, see the xinput(1) man page for details. Only
-the most important acceleration options are discussed here.
-.TP 7
-.BI "Option \*qAccelerationProfile\*q  \*q" integer \*q
-Select the profile. In layman's terms, the profile constitutes the "feeling" of
-the acceleration. More formally, it defines how the transfer function (actual
-acceleration as a function of current device velocity and acceleration controls)
-is constructed. This is mainly a matter of personal preference.
-.PP
-.RS 6
-.nf
-.B  " 0      classic (mostly compatible)"
-.B  "-1      none (only constant deceleration is applied)"
-.B  " 1      device-dependent"
-.B  " 2      polynomial (polynomial function)"
-.B  " 3      smooth linear (soft knee, then linear)"
-.B  " 4      simple (normal when slow, otherwise accelerated)"
-.B  " 5      power (power function)"
-.B  " 6      linear (more speed, more acceleration)"
-.B  " 7      limited (like linear, but maxes out at threshold)"
-.fi
-.RE
-.TP 7
-.BI "Option \*qConstantDeceleration\*q  \*q" real \*q
-Makes the pointer go
-.B deceleration
-times slower than normal. Most useful for high-resolution devices.
-.TP 7
-.BI "Option \*qAdaptiveDeceleration\*q  \*q" real \*q
-Allows to actually decelerate the pointer when going slow. At most, it will be
-.B adaptive deceleration
-times slower. Enables precise pointer placement without sacrificing speed.
-.TP 7
-.BI "Option \*qAccelerationScheme\*q  \*q" string \*q
-Selects the scheme, which is the underlying algorithm.
-.PP
-.RS 7
-.nf
-.B  "predictable   default algorithm (behaving more predictable)"
-.B  "lightweight   old acceleration code (as specified in the X protocol spec)"
-.B  "none          no acceleration or deceleration"
-.fi
-.RE
-.TP 7
-.BI "Option \*qAccelerationNumerator\*q  \*q" integer \*q
-.TP 7
-.BI "Option \*qAccelerationDenominator\*q  \*q" integer \*q
-Set numerator and denominator of the acceleration factor. The acceleration
-factor is a rational which, together with threshold, can be used to tweak
-profiles to suit the users needs. The
-.B simple
-and
-.B limited
-profiles use it directly (i.e. they accelerate by the factor), for other
-profiles it should hold that a higher acceleration factor leads to a faster
-pointer. Typically, 1 is unaccelerated and values up to 5 are sensible.
-.TP 7
-.BI "Option \*qAccelerationThreshold\*q  \*q" integer \*q
-Set the threshold, which is roughly the velocity (usually device units per 10
-ms) required for acceleration to become effective. The precise effect varies
-with the profile however.
-
-.SH "INPUTCLASS SECTION"
-The config file may have multiple
-.B InputClass
-sections.
-These sections are optional and are used to provide configuration for a
-class of input devices as they are automatically added. An input device can
-match more than one
-.B InputClass
-section. Each class can override settings from a previous class, so it is
-best to arrange the sections with the most generic matches first.
-.PP
-.B InputClass
-sections have the following format:
-.PP
-.RS 4
-.nf
-.B  "Section \*qInputClass\*q"
-.BI "    Identifier  \*q" name \*q
-.I  "    entries"
-.I  "    ..."
-.I  "    options"
-.I  "    ..."
-.B  "EndSection"
-.fi
-.RE
-.PP
-The
-.B Identifier
-entry is required in all
-.B InputClass
-sections.
-All other entries are optional.
-.PP
-The
-.B Identifier
-entry specifies the unique name for this input class.
-The
-.B Driver
-entry specifies the name of the driver to use for this input device.
-After all classes have been examined, the
-.RI \*q inputdriver \*q
-module from the first
-.B Driver
-entry will be enabled when using the loadable server.
-.PP
-When an input device is automatically added, its characteristics are
-checked against all
-.B InputClass
-sections. Each section can contain optional entries to narrow the match
-of the class. If none of the optional entries appear, the
-.B InputClass
-section is generic and will match any input device. If more than one of
-these entries appear, they all must match for the configuration to apply.
-.PP
-There are two types of match entries used in
-.B InputClass
-sections. The first allows various tokens to be matched against attributes
-of the device. An entry can be constructed to match attributes from different
-devices by separating arguments with a '|' character. Multiple entries of the
-same type may be supplied to add multiple matching conditions on the same
-attribute. For example:
-.PP
-.RS 4
-.nf
-.B  "Section \*qInputClass\*q"
-.B  "    Identifier   \*qMy Class\*q"
-.B  "    # product string must contain example and
-.B  "    # either gizmo or gadget
-.B  "    MatchProduct \*qexample\*q
-.B  "    MatchProduct \*qgizmo|gadget\*q
-.I  "    ..."
-.B  "EndSection"
-.fi
-.RE
-.TP 7
-.BI "MatchProduct  \*q" matchproduct \*q
-This entry can be used to check if the substring
-.RI \*q matchproduct \*q
-occurs in the device's product name.
-.TP 7
-.BI "MatchVendor  \*q" matchvendor \*q
-This entry can be used to check if the substring
-.RI \*q matchvendor \*q
-occurs in the device's vendor name.
-.TP 7
-.BI "MatchDevicePath \*q" matchdevice \*q
-This entry can be used to check if the device file matches the
-.RI \*q matchdevice \*q
-pathname pattern.
-.TP 7
-.BI "MatchOS \*q" matchos \*q
-This entry can be used to check if the operating system matches the
-case-insensitive
-.RI \*q matchos \*q
-string. This entry is only supported on platforms providing the
-.BR uname (2)
-system call.
-.TP 7
-.BI "MatchPnPID \*q" matchpnp \*q
-The device's Plug and Play (PnP) ID can be checked against the
-.RI \*q matchpnp \*q
-shell wildcard pattern.
-.TP 7
-.BI "MatchUSBID \*q" matchusb \*q
-The device's USB ID can be checked against the
-.RI \*q matchusb \*q
-shell wildcard pattern. The ID is constructed as lowercase hexadecimal numbers
-separated by a ':'. This is the same format as the
-.BR lsusb (8)
-program.
-.TP 7
-.BI "MatchDriver \*q" matchdriver \*q
-Check the case-sensitive string
-.RI \*q matchdriver \*q
-against the currently configured driver of the device. Ordering of sections
-using this entry is important since it will not match unless the driver has
-been set by the config backend or a previous
-.B InputClass
-section.
-.TP 7
-.BI "MatchTag \*q" matchtag \*q
-This entry can be used to check if tags assigned by the config backend
-matches the
-.RI \*q matchtag \*q
-pattern. A match is found if at least one of the tags given in
-.RI \*q matchtag \*q
-matches at least one of the tags assigned by the backend.
-.PP
-The second type of entry is used to match device types. These entries take a
-boolean argument similar to
-.B Option
-entries.
-.TP 7
-.BI "MatchIsKeyboard     \*q" bool \*q
-.TP 7
-.BI "MatchIsPointer      \*q" bool \*q
-.TP 7
-.BI "MatchIsJoystick     \*q" bool \*q
-.TP 7
-.BI "MatchIsTablet       \*q" bool \*q
-.TP 7
-.BI "MatchIsTouchpad     \*q" bool \*q
-.TP 7
-.BI "MatchIsTouchscreen  \*q" bool \*q
-.PP
-When an input device has been matched to the
-.B InputClass
-section, any
-.B Option
-entries are applied to the device. One
-.B InputClass
-specific
-.B Option
-is recognized. See the
-.B InputDevice
-section above for a description of the remaining
-.B Option
-entries.
-.TP 7
-.BI "Option \*qIgnore\*q \*q" boolean \*q
-This optional entry specifies that the device should be ignored entirely,
-and not added to the server. This can be useful when the device is handled
-by another program and no X events should be generated.
-.SH "DEVICE SECTION"
-The config file may have multiple
-.B Device
-sections.
-There must be at least one, for the video card being used.
-.PP
-.B Device
-sections have the following format:
-.PP
-.RS 4
-.nf
-.B  "Section \*qDevice\*q"
-.BI "    Identifier \*q" name \*q
-.BI "    Driver     \*q" driver \*q
-.I  "    entries"
-.I  "    ..."
-.B  "EndSection"
-.fi
-.RE
-.PP
-The
-.B Identifier
-and
-.B Driver
-entries are required in all
-.B Device
-sections.  All other entries are optional.
-.PP
-The
-.B Identifier
-entry specifies the unique name for this graphics device.
-The
-.B Driver
-entry specifies the name of the driver to use for this graphics device.
-When using the loadable server, the driver module
-.RI \*q driver \*q
-will be loaded for each active
-.B Device
-section.
-A
-.B Device
-section is considered active if it is referenced by an active
-.B Screen
-section.
-.PP
-.B Device
-sections recognise some driver\-independent entries and
-.BR Options ,
-which are described here.
-Not all drivers make use of these
-driver\-independent entries, and many of those that do don't require them
-to be specified because the information is auto\-detected.
-See the individual graphics driver manual pages for further information
-about this, and for a description of the device\-specific options.
-Note that most of the
-.B Options
-listed here (but not the other entries) may be specified in the
-.B Screen
-section instead of here in the
-.B Device
-section.
-.TP 7
-.BI "BusID  \*q" bus\-id \*q
-This specifies the bus location of the graphics card.
-For PCI/AGP cards,
-the
-.I bus\-id
-string has the form
-.BI PCI: bus : device : function
-(e.g., \(lqPCI:1:0:0\(rq might be appropriate for an AGP card).
-This field is usually optional in single-head configurations when using
-the primary graphics card.
-In multi-head configurations, or when using a secondary graphics card in a
-single-head configuration, this entry is mandatory.
-Its main purpose is to make an unambiguous connection between the device
-section and the hardware it is representing.
-This information can usually be found by running the pciaccess tool
-scanpci.
-.TP 7
-.BI "Screen  " number
-This option is mandatory for cards where a single PCI entity can drive more
-than one display (i.e., multiple CRTCs sharing a single graphics accelerator
-and video memory).
-One
-.B Device
-section is required for each head, and this
-parameter determines which head each of the
-.B Device
-sections applies to.
-The legal values of
-.I number
-range from 0 to one less than the total number of heads per entity.
-Most drivers require that the primary screen (0) be present.
-.TP 7
-.BI "Chipset  \*q" chipset \*q
-This usually optional entry specifies the chipset used on the graphics
-board.
-In most cases this entry is not required because the drivers will probe the
-hardware to determine the chipset type.
-Don't specify it unless the driver-specific documentation recommends that you
-do.
-.TP 7
-.BI "Ramdac  \*q" ramdac\-type \*q
-This optional entry specifies the type of RAMDAC used on the graphics
-board.
-This is only used by a few of the drivers, and in most cases it is not
-required because the drivers will probe the hardware to determine the
-RAMDAC type where possible.
-Don't specify it unless the driver-specific documentation recommends that you
-do.
-.TP 7
-.BI "DacSpeed  " speed
-.TP 7
-.BI "DacSpeed  " "speed\-8 speed\-16 speed\-24 speed\-32"
-This optional entry specifies the RAMDAC speed rating (which is usually
-printed on the RAMDAC chip).
-The speed is in MHz.
-When one value is given, it applies to all framebuffer pixel sizes.
-When multiple values are given, they apply to the framebuffer pixel sizes
-8, 16, 24 and 32 respectively.
-This is not used by many drivers, and only needs to be specified when the
-speed rating of the RAMDAC is different from the defaults built in to
-driver, or when the driver can't auto-detect the correct defaults.
-Don't specify it unless the driver-specific documentation recommends that you
-do.
-.TP 7
-.BI "Clocks  " "clock ..."
-specifies the pixel that are on your graphics board.
-The clocks are in MHz, and may be specified as a floating point number.
-The value is stored internally to the nearest kHz.
-The ordering of the clocks is important.
-It must match the order in which they are selected on the graphics board.
-Multiple
-.B Clocks
-lines may be specified, and each is concatenated to form the list.
-Most drivers do not use this entry, and it is only required for some older
-boards with non-programmable clocks.
-Don't specify this entry unless the driver-specific documentation explicitly
-recommends that you do.
-.TP
-.BI "ClockChip  \*q" clockchip\-type \*q
-This optional entry is used to specify the clock chip type on graphics
-boards which have a programmable clock generator.
-Only a few __xservername__ drivers support programmable clock chips.
-For details, see the appropriate driver manual page.
-.TP 7
-.BI "VideoRam  " "mem"
-This optional entry specifies the amount of video ram that is installed
-on the graphics board.
-This is measured in kBytes.
-In most cases this is not required because the __xservername__ server probes
-the graphics board to determine this quantity.
-The driver-specific documentation should indicate when it might be needed.
-.TP 7
-.BI "BiosBase  " "baseaddress"
-This optional entry specifies the base address of the video BIOS for
-the VGA board.
-This address is normally auto-detected, and should only be specified if the
-driver-specific documentation recommends it.
-.TP 7
-.BI "MemBase  " "baseaddress"
-This optional entry specifies the memory base address of a graphics
-board's linear frame buffer.
-This entry is not used by many drivers, and it should only be specified if
-the driver-specific documentation recommends it.
-.TP 7
-.BI "IOBase  " "baseaddress"
-This optional entry specifies the IO base address.
-This entry is not used by many drivers, and it should only be specified if
-the driver-specific documentation recommends it.
-.TP 7
-.BI "ChipID  " "id"
-This optional entry specifies a numerical ID representing the chip type.
-For PCI cards, it is usually the device ID.
-This can be used to override the auto-detection, but that should only be done
-when the driver-specific documentation recommends it.
-.TP 7
-.BI "ChipRev  " "rev"
-This optional entry specifies the chip revision number.
-This can be used to override the auto-detection, but that should only be done
-when the driver-specific documentation recommends it.
-.TP 7
-.BI "TextClockFreq  " "freq"
-This optional entry specifies the pixel clock frequency that is used
-for the regular text mode.
-The frequency is specified in MHz.
-This is rarely used.
-.TP 7
-.BI "Option \*qModeDebug\*q \*q" boolean \*q
-Enable printing of additional debugging information about modesetting to
-the server log.
-.ig
-.TP 7
-This optional entry allows an IRQ number to be specified.
-..
-.TP 7
-.B Options
-Option flags may be specified in the
-.B Device
-sections.
-These include driver\-specific options and driver\-independent options.
-The former are described in the driver\-specific documentation.
-Some of the latter are described below in the section about the
-.B Screen
-section, and they may also be included here.
-
-.SH "VIDEOADAPTOR SECTION"
-Nobody wants to say how this works.
-Maybe nobody knows ...
-
-.SH "MONITOR SECTION"
-The config file may have multiple
-.B Monitor
-sections.
-There should normally be at least one, for the monitor being used,
-but a default configuration will be created when one isn't specified.
-.PP
-.B Monitor
-sections have the following format:
-.PP
-.RS 4
-.nf
-.B  "Section \*qMonitor\*q"
-.BI "    Identifier \*q" name \*q
-.I  "    entries"
-.I  "    ..."
-.B  "EndSection"
-.fi
-.RE
-.PP
-The only mandatory entry in a
-.B Monitor
-section is the
-.B Identifier
-entry.
-.PP
-The
-.B Identifier
-entry specifies the unique name for this monitor.
-The
-.B Monitor
-section may be used to provide information about the specifications of the
-monitor, monitor-specific
-.BR Options ,
-and information about the video modes to use with the monitor.
-.PP
-With RandR 1.2-enabled drivers, monitor sections may be tied to specific
-outputs of the video card.  Using the name of the output defined by the video
-driver plus the identifier of a monitor section, one associates a monitor
-section with an output by adding an option to the Device section in the
-following format:
-
-.B Option \*qMonitor-outputname\*q \*qmonitorsection\*q
-
-(for example,
-.B Option \*qMonitor-VGA\*q \*qVGA monitor\*q
-for a VGA output)
-.PP
-In the absence of specific association of monitor sections to outputs, if a
-monitor section is present the server will associate it with an output to
-preserve compatibility for previous single-head configurations.
-.PP
-Specifying video modes is optional because the server will use the DDC or other
-information provided by the monitor to automatically configure the list of
-modes available.
-When modes are specified explicitly in the
-.B Monitor
-section (with the
-.BR Modes ,
-.BR ModeLine ,
-or
-.B UseModes
-keywords), built-in modes with the same names are not included.
-Built-in modes with different names are, however, still implicitly included,
-when they meet the requirements of the monitor.
-.PP
-The entries that may be used in
-.B Monitor
-sections are described below.
-.TP 7
-.BI "VendorName  \*q" vendor \*q
-This optional entry specifies the monitor's manufacturer.
-.TP 7
-.BI "ModelName  \*q" model \*q
-This optional entry specifies the monitor's model.
-.TP 7
-.BI "HorizSync  " "horizsync\-range"
-gives the range(s) of horizontal sync frequencies supported by the
-monitor.
-.I horizsync\-range
-may be a comma separated list of either discrete values or ranges of
-values.
-A range of values is two values separated by a dash.
-By default the values are in units of kHz.
-They may be specified in MHz or Hz
-if
-.B MHz
-or
-.B Hz
-is added to the end of the line.
-The data given here is used by the __xservername__ server to determine if video
-modes are within the specifications of the monitor.
-This information should be available in the monitor's handbook.
-If this entry is omitted, a default range of 28\-33kHz is used.
-.TP 7
-.BI "VertRefresh  " "vertrefresh\-range"
-gives the range(s) of vertical refresh frequencies supported by the
-monitor.
-.I vertrefresh\-range
-may be a comma separated list of either discrete values or ranges of
-values.
-A range of values is two values separated by a dash.
-By default the values are in units of Hz.
-They may be specified in MHz or kHz
-if
-.B MHz
-or
-.B kHz
-is added to the end of the line.
-The data given here is used by the __xservername__ server to determine if video
-modes are within the specifications of the monitor.
-This information should be available in the monitor's handbook.
-If this entry is omitted, a default range of 43\-72Hz is used.
-.TP 7
-.BI "DisplaySize  " "width height"
-This optional entry gives the width and height, in millimetres, of the
-picture area of the monitor.
-If given this is used to calculate the horizontal and vertical pitch (DPI) of
-the screen.
-.TP 7
-.BI "Gamma  " "gamma\-value"
-.TP 7
-.BI "Gamma  " "red\-gamma green\-gamma blue\-gamma"
-This is an optional entry that can be used to specify the gamma correction
-for the monitor.
-It may be specified as either a single value or as three separate RGB values.
-The values should be in the range 0.1 to 10.0, and the default is 1.0.
-Not all drivers are capable of using this information.
-.TP 7
-.BI "UseModes  \*q" modesection\-id \*q
-Include the set of modes listed in the
-.B Modes
-section called
-.IR modesection\-id.
-This makes all of the modes defined in that section available for use by
-this monitor.
-.TP 7
-.BI "Mode  \*q" name \*q
-This is an optional multi-line entry that can be used to provide
-definitions for video modes for the monitor.
-In most cases this isn't necessary because the built-in set of VESA standard
-modes will be sufficient.
-The
-.B Mode
-keyword indicates the start of a multi-line video mode description.
-The mode description is terminated with the
-.B EndMode
-keyword.
-The mode description consists of the following entries:
-.RS 7
-.TP 4
-.BI "DotClock  " clock
-is the dot (pixel) clock rate to be used for the mode.
-.TP 4
-.BI "HTimings  " "hdisp hsyncstart hsyncend htotal"
-specifies the horizontal timings for the mode.
-.TP 4
-.BI "VTimings  " "vdisp vsyncstart vsyncend vtotal"
-specifies the vertical timings for the mode.
-.TP 4
-.BI "Flags  \*q" flag \*q " ..."
-specifies an optional set of mode flags, each of which is a separate
-string in double quotes.
-.B \*qInterlace\*q
-indicates that the mode is interlaced.
-.B \*qDoubleScan\*q
-indicates a mode where each scanline is doubled.
-.B \*q+HSync\*q
-and
-.B \*q\-HSync\*q
-can be used to select the polarity of the HSync signal.
-.B \*q+VSync\*q
-and
-.B \*q\-VSync\*q
-can be used to select the polarity of the VSync signal.
-.B \*qComposite\*q
-can be used to specify composite sync on hardware where this is supported.
-Additionally, on some hardware,
-.B \*q+CSync\*q
-and
-.B \*q\-CSync\*q
-may be used to select the composite sync polarity.
-.TP 4
-.BI "HSkew  " hskew
-specifies the number of pixels (towards the right edge of the screen) by
-which the display enable signal is to be skewed.
-Not all drivers use this information.
-This option might become necessary to override the default value supplied
-by the server (if any).
-\(lqRoving\(rq horizontal lines indicate this value needs to be increased.
-If the last few pixels on a scan line appear on the left of the screen,
-this value should be decreased.
-.TP 4
-.BI "VScan  " vscan
-specifies the number of times each scanline is painted on the screen.
-Not all drivers use this information.
-Values less than 1 are treated as 1, which is the default.
-Generally, the
-.B \*qDoubleScan\*q
-.B Flag
-mentioned above doubles this value.
-.RE
-.TP 7
-.BI "ModeLine  \*q" name \*q " mode\-description"
-This entry is a more compact version of the
-.B Mode
-entry, and it also can be used to specify video modes for the monitor.
-is a single line format for specifying video modes.
-In most cases this isn't necessary because the built\-in set of VESA
-standard modes will be sufficient.
-.PP
-.RS 7
-The
-.I mode\-description
-is in four sections, the first three of which are mandatory.
-The first is the dot (pixel) clock.
-This is a single number specifying the pixel clock rate for the mode in
-MHz.
-The second section is a list of four numbers specifying the horizontal
-timings.
-These numbers are the
-.IR hdisp ,
-.IR hsyncstart ,
-.IR hsyncend ,
-and
-.I htotal
-values.
-The third section is a list of four numbers specifying the vertical
-timings.
-These numbers are the
-.IR vdisp ,
-.IR vsyncstart ,
-.IR vsyncend ,
-and
-.I vtotal
-values.
-The final section is a list of flags specifying other characteristics of
-the mode.
-.B Interlace
-indicates that the mode is interlaced.
-.B DoubleScan
-indicates a mode where each scanline is doubled.
-.B +HSync
-and
-.B \-HSync
-can be used to select the polarity of the HSync signal.
-.B +VSync
-and
-.B \-VSync
-can be used to select the polarity of the VSync signal.
-.B Composite
-can be used to specify composite sync on hardware where this is supported.
-Additionally, on some hardware,
-.B +CSync
-and
-.B \-CSync
-may be used to select the composite sync polarity.
-The
-.B HSkew
-and
-.B VScan
-options mentioned above in the
-.B Modes
-entry description can also be used here.
-.RE
-.TP 7
-.BI "Option " "\*qDPMS\*q  " \*qbool\*q
-This option controls whether the server should enable the DPMS extension
-for power management for this screen.  The default is to enable the
-extension.
-.TP 7
-.BI "Option " "\*qSyncOnGreen\*q  " \*qbool\*q
-This option controls whether the video card should drive the sync signal
-on the green color pin.  Not all cards support this option, and most
-monitors do not require it.  The default is off.
-.TP 7
-.BI "Option " "\*qPrimary\*q  " \*qbool\*q
-This optional entry specifies that the monitor should be treated as the primary
-monitor. (RandR 1.2-supporting drivers only)
-.TP 7
-.BI "Option " "\*qPreferredMode\*q  " \*qstring\*q
-This optional entry specifies a mode to be marked as the preferred initial mode
-of the monitor.
-(RandR 1.2-supporting drivers only)
-.TP 7
-.BI "Option " "\*qPosition\*q  " "\*qx y\*q"
-This optional entry specifies the position of the monitor within the X
-screen.
-(RandR 1.2-supporting drivers only)
-.TP 7
-.BI "Option " "\*qLeftOf\*q  " \*qoutput\*q
-This optional entry specifies that the monitor should be positioned to the
-left of the output (not monitor) of the given name.
-(RandR 1.2-supporting drivers only)
-.TP 7
-.BI "Option " "\*qRightOf\*q  " \*qoutput\*q
-This optional entry specifies that the monitor should be positioned to the
-right of the output (not monitor) of the given name.
-(RandR 1.2-supporting drivers only)
-.TP 7
-.BI "Option " "\*qAbove\*q  " \*qoutput\*q
-This optional entry specifies that the monitor should be positioned above the
-output (not monitor) of the given name.
-(RandR 1.2-supporting drivers only)
-.TP 7
-.BI "Option " "\*qBelow\*q  " \*qoutput\*q
-This optional entry specifies that the monitor should be positioned below the
-output (not monitor) of the given name.
-(RandR 1.2-supporting drivers only)
-.TP 7
-.BI "Option " "\*qEnable\*q  " \*qbool\*q
-This optional entry specifies whether the monitor should be turned on
-at startup.  By default, the server will attempt to enable all connected
-monitors.
-(RandR 1.2-supporting drivers only)
-.TP 7
-.BI "Option " "\*qDefaultModes\*q  " \*qbool\*q
-This optional entry specifies whether the server should add supported default
-modes to the list of modes offered on this monitor. By default, the server
-will add default modes; you should only disable this if you can guarantee
-that EDID will be available at all times, or if you have added custom modelines
-which the server can use.
-(RandR 1.2-supporting drivers only)
-.TP 7
-.BI "Option " "\*qMinClock\*q  " \*qfrequency\*q
-This optional entry specifies the minimum dot clock, in kHz, that is supported
-by the monitor.
-.TP 7
-.BI "Option " "\*qMaxClock\*q  " \*qfrequency\*q
-This optional entry specifies the maximum dot clock, in kHz, that is supported
-by the monitor.
-.TP 7
-.BI "Option " "\*qIgnore\*q  " \*qbool\*q
-This optional entry specifies that the monitor should be ignored entirely,
-and not reported through RandR.  This is useful if the hardware reports the
-presence of outputs that don't exist.
-(RandR 1.2-supporting drivers only)
-.TP 7
-.BI "Option " "\*qRotate\*q  " \*qrotation\*q
-This optional entry specifies the initial rotation of the given monitor.
-Valid values for rotation are \*qnormal\*q, \*qleft\*q, \*qright\*q, and
-\*qinverted\*q.
-(RandR 1.2-supporting drivers only)
-
-.SH "MODES SECTION"
-The config file may have multiple
-.B Modes
-sections, or none.
-These sections provide a way of defining sets of video modes independently
-of the
-.B Monitor
-sections.
-.B Monitor
-sections may include the definitions provided in these sections by
-using the
-.B UseModes
-keyword.
-In most cases the
-.B Modes
-sections are not necessary because the built\-in set of VESA standard modes
-will be sufficient.
-.PP
-.B Modes
-sections have the following format:
-.PP
-.RS 4
-.nf
-.B  "Section \*qModes\*q"
-.BI "    Identifier \*q" name \*q
-.I  "    entries"
-.I  "    ..."
-.B  "EndSection"
-.fi
-.RE
-.PP
-The
-.B Identifier
-entry specifies the unique name for this set of mode descriptions.
-The other entries permitted in
-.B Modes
-sections are the
-.B Mode
-and
-.B ModeLine
-entries that are described above in the
-.B Monitor
-section.
-.SH "SCREEN SECTION"
-The config file may have multiple
-.B Screen
-sections.
-There must be at least one, for the \(lqscreen\(rq being used.
-A \(lqscreen\(rq represents the binding of a graphics device
-.RB ( Device
-section) and a monitor
-.RB ( Monitor
-section).
-A
-.B Screen
-section is considered \(lqactive\(rq if it is referenced by an active
-.B ServerLayout
-section or by the
-.B \-screen
-command line option.
-If neither of those is present, the first
-.B Screen
-section found in the config file is considered the active one.
-.PP
-.B Screen
-sections have the following format:
-.PP
-.RS 4
-.nf
-.B  "Section \*qScreen\*q"
-.BI "    Identifier \*q" name \*q
-.BI "    Device     \*q" devid \*q
-.BI "    Monitor    \*q" monid \*q
-.I  "    entries"
-.I  "    ..."
-.BI "    SubSection \*qDisplay\*q"
-.I  "       entries"
-.I  "       ...
-.B  "    EndSubSection"
-.I  "    ..."
-.B  "EndSection"
-.fi
-.RE
-.PP
-The
-.B Identifier
-and
-.B Device
-entries are mandatory.
-All others are optional.
-.PP
-The
-.B Identifier
-entry specifies the unique name for this screen.
-The
-.B Screen
-section provides information specific to the whole screen, including
-screen\-specific
-.BR Options .
-In multi\-head configurations, there will be multiple active
-.B Screen
-sections, one for each head.
-The entries available
-for this section are:
-.TP 7
-.BI "Device  \*q" device\-id \*q
-This mandatory entry specifies the
-.B Device
-section to be used for this screen.
-This is what ties a specific graphics card to a screen.
-The
-.I device\-id
-must match the
-.B Identifier
-of a
-.B Device
-section in the config file.
-.TP 7
-.BI "Monitor  \*q" monitor\-id \*q
-specifies which monitor description is to be used for this screen.
-If a
-.B Monitor
-name is not specified, a default configuration is used.
-Currently the default configuration may not function as expected on all
-platforms.
-.TP 7
-.BI "VideoAdaptor  \*q" xv\-id \*q
-specifies an optional Xv video adaptor description to be used with this
-screen.
-.TP 7
-.BI "DefaultDepth  " depth
-specifies which color depth the server should use by default.
-The
-.B \-depth
-command line option can be used to override this.
-If neither is specified, the default depth is driver\-specific, but in most
-cases is 8.
-.TP 7
-.BI "DefaultFbBpp  " bpp
-specifies which framebuffer layout to use by default.
-The
-.B \-fbbpp
-command line option can be used to override this.
-In most cases the driver will chose the best default value for this.
-The only case where there is even a choice in this value is for depth 24,
-where some hardware supports both a packed 24 bit framebuffer layout and a
-sparse 32 bit framebuffer layout.
-.TP 7
-.B Options
-Various
-.B Option
-flags may be specified in the
-.B Screen
-section.
-Some are driver\-specific and are described in the driver documentation.
-Others are driver\-independent, and will eventually be described here.
-.\" XXX These should really be in an xaa man page.
-.TP 7
-.BI "Option \*qAccel\*q"
-Enables XAA (X Acceleration Architecture), a mechanism that makes video cards'
-2D hardware acceleration available to the  __xservername__ server.
-This option is on by default, but it may be necessary to turn it off if
-there are bugs in the driver.
-There are many options to disable specific accelerated operations, listed
-below.
-Note that disabling an operation will have no effect if the operation is
-not accelerated (whether due to lack of support in the hardware or in the
-driver).
-.TP 7
-.BI "Option \*qInitPrimary\*q \*q" boolean \*q
-Use the Int10 module to initialize the primary graphics card.
-Normally, only secondary cards are soft-booted using the Int10 module, as the
-primary card has already been initialized by the BIOS at boot time.
-Default: false.
-.TP 7
-.BI "Option \*qNoInt10\*q \*q" boolean \*q
-Disables the Int10 module, a module that uses the int10 call to the BIOS
-of the graphics card to initialize it.
-Default: false.
-.TP 7
-.BI "Option \*qNoMTRR\*q"
-Disables MTRR (Memory Type Range Register) support, a feature of modern
-processors which can improve video performance by a factor of up to 2.5.
-Some hardware has buggy MTRR support, and some video drivers have been
-known to exhibit problems when MTRR's are used.
-.TP 7
-.BI "Option \*qXaaNoCPUToScreenColorExpandFill\*q"
-Disables accelerated rectangular expansion blits from source patterns
-stored in system memory (using a memory\-mapped aperture).
-.TP 7
-.BI "Option \*qXaaNoColor8x8PatternFillRect\*q"
-Disables accelerated fills of a rectangular region with a full\-color
-pattern.
-.TP 7
-.BI "Option \*qXaaNoColor8x8PatternFillTrap\*q"
-Disables accelerated fills of a trapezoidal region with a full\-color
-pattern.
-.TP 7
-.BI "Option \*qXaaNoDashedBresenhamLine\*q"
-Disables accelerated dashed Bresenham line draws.
-.TP 7
-.BI "Option \*qXaaNoDashedTwoPointLine\*q"
-Disables accelerated dashed line draws between two arbitrary points.
-.TP 7
-.BI "Option \*qXaaNoImageWriteRect\*q"
-Disables accelerated transfers of full\-color rectangular patterns from
-system memory to video memory (using a memory\-mapped aperture).
-.TP 7
-.BI "Option \*qXaaNoMono8x8PatternFillRect\*q"
-Disables accelerated fills of a rectangular region with a monochrome
-pattern.
-.TP 7
-.BI "Option \*qXaaNoMono8x8PatternFillTrap\*q"
-Disables accelerated fills of a trapezoidal region with a monochrome
-pattern.
-.TP 7
-.BI "Option \*qXaaNoOffscreenPixmaps\*q"
-Disables accelerated draws into pixmaps stored in offscreen video memory.
-.TP 7
-.BI "Option \*qXaaNoPixmapCache\*q"
-Disables caching of patterns in offscreen video memory.
-.TP 7
-.BI "Option \*qXaaNoScanlineCPUToScreenColorExpandFill\*q"
-Disables accelerated rectangular expansion blits from source patterns
-stored in system memory (one scan line at a time).
-.TP 7
-.BI "Option \*qXaaNoScanlineImageWriteRect\*q"
-Disables accelerated transfers of full\-color rectangular patterns from
-system memory to video memory (one scan line at a time).
-.TP 7
-.BI "Option \*qXaaNoScreenToScreenColorExpandFill\*q"
-Disables accelerated rectangular expansion blits from source patterns
-stored in offscreen video memory.
-.TP 7
-.BI "Option \*qXaaNoScreenToScreenCopy\*q"
-Disables accelerated copies of rectangular regions from one part of
-video memory to another part of video memory.
-.TP 7
-.BI "Option \*qXaaNoSolidBresenhamLine\*q"
-Disables accelerated solid Bresenham line draws.
-.TP 7
-.BI "Option \*qXaaNoSolidFillRect\*q"
-Disables accelerated solid\-color fills of rectangles.
-.TP 7
-.BI "Option \*qXaaNoSolidFillTrap\*q"
-Disables accelerated solid\-color fills of Bresenham trapezoids.
-.TP 7
-.BI "Option \*qXaaNoSolidHorVertLine\*q"
-Disables accelerated solid horizontal and vertical line draws.
-.TP 7
-.BI "Option \*qXaaNoSolidTwoPointLine\*q"
-Disables accelerated solid line draws between two arbitrary points.
-.PP
-Each
-.B Screen
-section may optionally contain one or more
-.B Display
-subsections.
-Those subsections provide depth/fbbpp specific configuration information,
-and the one chosen depends on the depth and/or fbbpp that is being used for
-the screen.
-The
-.B Display
-subsection format is described in the section below.
-
-.SH "DISPLAY SUBSECTION"
-Each
-.B Screen
-section may have multiple
-.B Display
-subsections.
-The \(lqactive\(rq
-.B Display
-subsection is the first that matches the depth and/or fbbpp values being
-used, or failing that, the first that has neither a depth or fbbpp value
-specified.
-The
-.B Display
-subsections are optional.
-When there isn't one that matches the depth and/or fbbpp values being used,
-all the parameters that can be specified here fall back to their defaults.
-.PP
-.B Display
-subsections have the following format:
-.PP
-.RS 4
-.nf
-.B  "    SubSection \*qDisplay\*q"
-.BI "        Depth  " depth
-.I  "        entries"
-.I  "        ..."
-.B  "    EndSubSection"
-.fi
-.RE
-.TP 7
-.BI "Depth  " depth
-This entry specifies what colour depth the
-.B Display
-subsection is to be used for.
-This entry is usually specified, but it may be omitted to create a match\-all
-.B Display
-subsection or when wishing to match only against the
-.B FbBpp
-parameter.
-The range of
-.I depth
-values that are allowed depends on the driver.
-Most drivers support 8, 15, 16 and 24.
-Some also support 1 and/or 4, and some may support other values (like 30).
-Note:
-.I depth
-means the number of bits in a pixel that are actually used to determine
-the pixel colour.
-32 is not a valid
-.I depth
-value.
-Most hardware that uses 32 bits per pixel only uses 24 of them to hold the
-colour information, which means that the colour depth is 24, not 32.
-.TP 7
-.BI "FbBpp  " bpp
-This entry specifies the framebuffer format this
-.B Display
-subsection is to be used for.
-This entry is only needed when providing depth 24 configurations that allow
-a choice between a 24 bpp packed framebuffer format and a 32bpp sparse
-framebuffer format.
-In most cases this entry should not be used.
-.TP 7
-.BI "Weight  " "red\-weight green\-weight blue\-weight"
-This optional entry specifies the relative RGB weighting to be used
-for a screen is being used at depth 16 for drivers that allow multiple
-formats.
-This may also be specified from the command line with the
-.B \-weight
-option (see
-.BR __xservername__(__appmansuffix__)).
-.TP 7
-.BI "Virtual  " "xdim ydim"
-This optional entry specifies the virtual screen resolution to be used.
-.I xdim
-must be a multiple of either 8 or 16 for most drivers, and a multiple
-of 32 when running in monochrome mode.
-The given value will be rounded down if this is not the case.
-Video modes which are too large for the specified virtual size will be
-rejected.
-If this entry is not present, the virtual screen resolution will be set to
-accommodate all the valid video modes given in the
-.B Modes
-entry.
-Some drivers/hardware combinations do not support virtual screens.
-Refer to the appropriate driver\-specific documentation for details.
-.TP 7
-.BI "ViewPort  " "x0 y0"
-This optional entry sets the upper left corner of the initial display.
-This is only relevant when the virtual screen resolution is different
-from the resolution of the initial video mode.
-If this entry is not given, then the initial display will be centered in
-the virtual display area.
-.TP 7
-.BI "Modes  \*q" mode\-name \*q " ..."
-This optional entry specifies the list of video modes to use.
-Each
-.I mode\-name
-specified must be in double quotes.
-They must correspond to those specified or referenced in the appropriate
-.B Monitor
-section (including implicitly referenced built\-in VESA standard modes).
-The server will delete modes from this list which don't satisfy various
-requirements.
-The first valid mode in this list will be the default display mode for
-startup.
-The list of valid modes is converted internally into a circular list.
-It is possible to switch to the next mode with
-.B Ctrl+Alt+Keypad\-Plus
-and to the previous mode with
-.BR Ctrl+Alt+Keypad\-Minus .
-When this entry is omitted, the valid modes referenced by the appropriate
-.B Monitor
-section will be used.  If the
-.B Monitor
-section contains no modes, then the selection will be taken from the
-built-in VESA standard modes.
-.TP 7
-.BI "Visual  \*q" visual\-name \*q
-This optional entry sets the default root visual type.
-This may also be specified from the command line (see the
-.BR Xserver(__appmansuffix__)
-man page).
-The visual types available for depth 8 are (default is
-.BR PseudoColor ):
-.PP
-.RS 11
-.nf
-.B StaticGray
-.B GrayScale
-.B StaticColor
-.B PseudoColor
-.B TrueColor
-.B DirectColor
-.fi
-.RE
-.PP
-.RS 7
-The visual type available for the depths 15, 16 and 24 are (default is
-.BR TrueColor ):
-.PP
-.RS 4
-.nf
-.B TrueColor
-.B DirectColor
-.fi
-.RE
-.PP
-Not all drivers support
-.B DirectColor
-at these depths.
-.PP
-The visual types available for the depth 4 are (default is
-.BR StaticColor ):
-.PP
-.RS 4
-.nf
-.B StaticGray
-.B GrayScale
-.B StaticColor
-.B PseudoColor
-.fi
-.RE
-.PP
-The visual type available for the depth 1 (monochrome) is
-.BR StaticGray .
-.RE
-.TP 7
-.BI "Black  " "red green blue"
-This optional entry allows the \(lqblack\(rq colour to be specified.
-This is only supported at depth 1.
-The default is black.
-.TP 7
-.BI "White  " "red green blue"
-This optional entry allows the \(lqwhite\(rq colour to be specified.
-This is only supported at depth 1.
-The default is white.
-.TP 7
-.B Options
-Option flags may be specified in the
-.B Display
-subsections.
-These may include driver\-specific options and driver\-independent options.
-The former are described in the driver\-specific documentation.
-Some of the latter are described above in the section about the
-.B Screen
-section, and they may also be included here.
-.SH "SERVERLAYOUT SECTION"
-The config file may have multiple
-.B ServerLayout
-sections.
-A \(lqserver layout\(rq represents the binding of one or more screens
-.RB ( Screen
-sections) and one or more input devices
-.RB ( InputDevice
-sections) to form a complete configuration.
-In multi\-head configurations, it also specifies the relative layout of the
-heads.
-A
-.B ServerLayout
-section is considered \(lqactive\(rq if it is referenced by the
-.B \-layout
-command line option or by an
-.B "Option \*qDefaultServerLayout\*q"
-entry in the
-.B ServerFlags
-section (the former takes precedence over the latter).
-If those options are not used, the first
-.B ServerLayout
-section found in the config file is considered the active one.
-If no
-.B ServerLayout
-sections are present, the single active screen and two active (core)
-input devices are selected as described in the relevant sections above.
-.PP
-.B ServerLayout
-sections have the following format:
-.PP
-.RS 4
-.nf
-.B  "Section \*qServerLayout\*q"
-.BI "    Identifier   \*q" name \*q
-.BI "    Screen       \*q" screen\-id \*q
-.I  "    ..."
-.BI "    InputDevice  \*q" idev\-id \*q
-.I  "    ..."
-.I  "    options"
-.I  "    ..."
-.B  "EndSection"
-.fi
-.RE
-.PP
-Each
-.B ServerLayout
-section must have an
-.B Identifier
-entry and at least one
-.B Screen
-entry.
-.PP
-The
-.B Identifier
-entry specifies the unique name for this server layout.
-The
-.B ServerLayout
-section provides information specific to the whole session, including
-session\-specific
-.BR Options .
-The
-.B ServerFlags
-options (described above) may be specified here, and ones given here
-override those given in the
-.B ServerFlags
-section.
-.PP
-The entries that may be used in this section are described here.
-.TP 7
-.BI "Screen  " "screen\-num" " \*qscreen\-id\*q " "position\-information"
-One of these entries must be given for each screen being used in
-a session.
-The
-.I screen\-id
-field is mandatory, and specifies the
-.B Screen
-section being referenced.
-The
-.I screen\-num
-field is optional, and may be used to specify the screen number
-in multi\-head configurations.
-When this field is omitted, the screens will be numbered in the order that
-they are listed in.
-The numbering starts from 0, and must be consecutive.
-The
-.I position\-information
-field describes the way multiple screens are positioned.
-There are a number of different ways that this information can be provided:
-.RS 7
-.TP 4
-.I  "x y"
-.TP 4
-.BI "Absolute  " "x y"
-These both specify that the upper left corner's coordinates are
-.RI ( x , y ).
-The
-.B Absolute
-keyword is optional.
-Some older versions of XFree86 (4.2 and earlier) don't recognise the
-.B Absolute
-keyword, so it's safest to just specify the coordinates without it.
-.TP 4
-.BI "RightOf   \*q" screen\-id \*q
-.TP 4
-.BI "LeftOf    \*q" screen\-id \*q
-.TP 4
-.BI "Above     \*q" screen\-id \*q
-.TP 4
-.BI "Below     \*q" screen\-id \*q
-.TP 4
-.BI "Relative  \*q" screen\-id \*q " x y"
-These give the screen's location relative to another screen.
-The first four position the screen immediately to the right, left, above or
-below the other screen.
-When positioning to the right or left, the top edges are aligned.
-When positioning above or below, the left edges are aligned.
-The
-.B Relative
-form specifies the offset of the screen's origin (upper left corner)
-relative to the origin of another screen.
-.RE
-.TP 7
-.BI "InputDevice  \*q" idev\-id "\*q \*q" option \*q " ..."
-One of these entries should be given for each input device being used in
-a session.
-Normally at least two are required, one each for the core pointer and
-keyboard devices.
-If either of those is missing, suitable
-.B InputDevice
-entries are searched for using the method described above in the
-.B INPUTDEVICE
-section.  The
-.I idev\-id
-field is mandatory, and specifies the name of the
-.B InputDevice
-section being referenced.
-Multiple
-.I option
-fields may be specified, each in double quotes.
-The options permitted here are any that may also be given in the
-.B InputDevice
-sections.
-Normally only session\-specific input device options would be used here.
-The most commonly used options are:
-.PP
-.RS 11
-.nf
-.B \*qCorePointer\*q
-.B \*qCoreKeyboard\*q
-.B \*qSendCoreEvents\*q
-.fi
-.RE
-.PP
-.RS 7
-and the first two should normally be used to indicate the core pointer
-and core keyboard devices respectively.
-.RE
-.TP 7
-.B Options
-In addition to the following, any option permitted in the
-.B ServerFlags
-section may also be specified here.
-When the same option appears in both places, the value given here overrides
-the one given in the
-.B ServerFlags
-section.
-.TP 7
-.BI "Option \*qIsolateDevice\*q  \*q" bus\-id \*q
-Restrict device resets to the specified
-.IR bus\-id .
-See the
-.B BusID
-option (described in
-.BR "DEVICE SECTION" ,
-above) for the format of the
-.I bus\-id
-parameter.
-This option overrides
-.BR SingleCard ,
-if specified.
-At present, only PCI devices can be isolated in this manner.
-.TP 7
-.BI "Option \*qSingleCard\*q  \*q" boolean \*q
-As
-.BR IsolateDevice ,
-except that the bus ID of the first device in the layout is used.
-.PP
-Here is an example of a
-.B ServerLayout
-section for a dual headed configuration with two mice:
-.PP
-.RS 4
-.nf
-.B "Section \*qServerLayout\*q"
-.B "    Identifier  \*qLayout 1\*q"
-.B "    Screen      \*qMGA 1\*q"
-.B "    Screen      \*qMGA 2\*q RightOf \*qMGA 1\*q"
-.B "    InputDevice \*qKeyboard 1\*q \*qCoreKeyboard\*q"
-.B "    InputDevice \*qMouse 1\*q    \*qCorePointer\*q"
-.B "    InputDevice \*qMouse 2\*q    \*qSendCoreEvents\*q"
-.B "    Option      \*qBlankTime\*q  \*q5\*q"
-.B "EndSection"
-.fi
-.RE
-.SH "DRI SECTION"
-This optional section is used to provide some information for the
-Direct Rendering Infrastructure.
-Details about the format of this section can be found on-line at
-.IR <http://dri.freedesktop.org/> .
-.SH "VENDOR SECTION"
-The optional
-.B Vendor
-section may be used to provide vendor\-specific configuration information.
-Multiple
-.B Vendor
-sections may be present, and they may contain an
-.B Identifier
-entry and multiple
-.B Option
-flags.
-The data therein is not used in this release.
-.PP
-.SH "SEE ALSO"
-General:
-.BR X (__miscmansuffix__),
-.BR Xserver (__appmansuffix__),
-.BR __xservername__ (__appmansuffix__),
-.BR cvt (__appmansuffix__),
-.BR gtf (__appmansuffix__).
-.PP
-.B "Not all modules or interfaces are available on all platforms."
-.PP
-Display drivers:
-.BR apm (__drivermansuffix__),
-.BR ati (__drivermansuffix__),
-.BR chips (__drivermansuffix__),
-.BR cirrus (__drivermansuffix__),
-.BR cyrix (__drivermansuffix__),
-.BR fbdev (__drivermansuffix__),
-.BR glide (__drivermansuffix__),
-.BR glint (__drivermansuffix__),
-.BR i128 (__drivermansuffix__),
-.BR i740 (__drivermansuffix__),
-.BR imstt (__drivermansuffix__),
-.BR intel (__drivermansuffix__),
-.BR mga (__drivermansuffix__),
-.BR neomagic (__drivermansuffix__),
-.BR nv (__drivermansuffix__),
-.BR openchrome (__drivermansuffix__),
-.BR r128 (__drivermansuffix__),
-.BR radeon (__drivermansuffix__),
-.BR rendition (__drivermansuffix__),
-.BR savage (__drivermansuffix__),
-.BR s3virge (__drivermansuffix__),
-.BR siliconmotion (__drivermansuffix__),
-.BR sis (__drivermansuffix__),
-.BR sisusb (__drivermansuffix__),
-.BR sunbw2 (__drivermansuffix__),
-.BR suncg14 (__drivermansuffix__),
-.BR suncg3 (__drivermansuffix__),
-.BR suncg6 (__drivermansuffix__),
-.BR sunffb (__drivermansuffix__),
-.BR sunleo (__drivermansuffix__),
-.BR suntcx (__drivermansuffix__),
-.BR tdfx (__drivermansuffix__),
-.\" .BR tga (__drivermansuffix__),
-.BR trident (__drivermansuffix__),
-.BR tseng (__drivermansuffix__),
-.BR vesa (__drivermansuffix__),
-.BR vmware (__drivermansuffix__),
-.BR voodoo (__drivermansuffix__),
-.BR wsfb (__drivermansuffix__),
-.BR xgi (__drivermansuffix__),
-.BR xgixp (__drivermansuffix__).
-.PP
-Input drivers:
-.BR acecad (__drivermansuffix__),
-.BR citron (__drivermansuffix__),
-.BR elographics (__drivermansuffix__),
-.BR evdev (__drivermansuffix__),
-.BR fpit (__drivermansuffix__),
-.BR joystick (__drivermansuffix__),
-.BR kbd (__drivermansuffix__),
-.BR mousedrv (__drivermansuffix__),
-.BR mutouch (__drivermansuffix__),
-.BR penmount (__drivermansuffix__),
-.BR synaptics (__drivermansuffix__),
-.BR vmmouse (__drivermansuffix__),
-.BR void (__drivermansuffix__),
-.BR wacom (__drivermansuffix__).
-.PP
-Other modules and interfaces:
-.BR exa (__drivermansuffix__),
-.BR fbdevhw (__drivermansuffix__),
-.\" .BR shadowfb (__drivermansuffix__),
-.BR v4l (__drivermansuffix__).
-.br
-.SH AUTHORS
-This manual page was largely rewritten by David Dawes
-.IR <dawes@xfree86.org> .
+.\" shorthand for double quote that works everywhere.
+.ds q \N'34'
+.TH __xconfigfile__ __filemansuffix__ __vendorversion__
+.SH NAME
+__xconfigfile__ and __xconfigdir__ \- configuration files for
+__xservername__ X server
+.SH INTRODUCTION
+.B __xservername__
+supports several mechanisms for supplying/obtaining configuration and
+run-time parameters: command line options, environment variables, the
+__xconfigfile__ and __xconfigdir__ configuration files, auto-detection,
+and fallback defaults. When the same information is supplied in more
+than one way, the highest precedence mechanism is used. The list of
+mechanisms is ordered from highest precedence to lowest. Note that not
+all parameters can be supplied via all methods. The available command
+line options and environment variables (and some defaults) are
+described in the Xserver(__appmansuffix__) and
+__xservername__(__appmansuffix__) manual pages. Most configuration file
+parameters, with their defaults, are described below. Driver and module
+specific configuration parameters are described in the relevant driver
+or module manual page.
+.SH DESCRIPTION
+.B __xservername__
+uses a configuration file called
+.I __xconfigfile__
+and files ending in the suffix
+.I .conf
+from the directory
+.I __xconfigdir__
+for its initial setup.
+The
+.I __xconfigfile__
+configuration file is searched for in the following places when the
+server is started as a normal user:
+.PP
+.RS 4
+.nf
+.IR /etc/X11/ <cmdline>
+.IR __projectroot__/etc/X11/ <cmdline>
+.IB /etc/X11/ $XORGCONFIG
+.IB __projectroot__/etc/X11/ $XORGCONFIG
+.I /etc/X11/__xconfigfile__
+.I /etc/__xconfigfile__
+.IR __projectroot__/etc/X11/__xconfigfile__. <hostname>
+.I __projectroot__/etc/X11/__xconfigfile__
+.IR __projectroot__/lib/X11/__xconfigfile__. <hostname>
+.I __projectroot__/lib/X11/__xconfigfile__
+.fi
+.RE
+.PP
+where
+.I <cmdline>
+is a relative path (with no \(lq..\(rq components) specified with the
+.B \-config
+command line option,
+.B $XORGCONFIG
+is the relative path (with no \(lq..\(rq components) specified by that
+environment variable, and
+.I <hostname>
+is the machine's hostname as reported by
+.BR gethostname (__libmansuffix__).
+.PP
+When the __xservername__ server is started by the \(lqroot\(rq user, the config file
+search locations are as follows:
+.PP
+.RS 4
+.nf
+<cmdline>
+.IR /etc/X11/ <cmdline>
+.IR __projectroot__/etc/X11/ <cmdline>
+.B $XORGCONFIG
+.IB /etc/X11/ $XORGCONFIG
+.IB __projectroot__/etc/X11/ $XORGCONFIG
+.I /etc/X11/__xconfigfile__
+.I /etc/__xconfigfile__
+.IR __projectroot__/etc/X11/__xconfigfile__. <hostname>
+.I __projectroot__/etc/X11/__xconfigfile__
+.IR __projectroot__/lib/X11/__xconfigfile__. <hostname>
+.I __projectroot__/lib/X11/__xconfigfile__
+.fi
+.RE
+.PP
+where
+.I <cmdline>
+is the path specified with the
+.B \-config
+command line option (which may be absolute or relative),
+.B $XORGCONFIG
+is the path specified by that
+environment variable (absolute or relative),
+.B $HOME
+is the path specified by that environment variable (usually the home
+directory), and
+.I <hostname>
+is the machine's hostname as reported by
+.BR gethostname (__libmansuffix__).
+.PP
+Additional configuration files are searched for in the following
+directories when the server is started as a normal user:
+.PP
+.RS 4
+.nf
+.IR /etc/X11/ <cmdline>
+.IR __sysconfdir__/X11/ <cmdline>
+.I /etc/X11/__xconfigdir__
+.I __sysconfdir__/X11/__xconfigdir__
+.fi
+.RE
+.PP
+where
+.I <cmdline>
+is a relative path (with no \(lq..\(rq components) specified with the
+.B \-configdir
+command line option.
+.PP
+When the __xservername__ server is started by the \(lqroot\(rq user, the
+config directory search locations are as follows:
+.PP
+.RS 4
+.nf
+<cmdline>
+.IR /etc/X11/ <cmdline>
+.IR __sysconfdir__/X11/ <cmdline>
+.I /etc/X11/__xconfigdir__
+.I __sysconfdir__/X11/__xconfigdir__
+.fi
+.RE
+.PP
+where
+.I <cmdline>
+is the path specified with the
+.B \-configdir
+command line option (which may be absolute or relative).
+.PP
+Finally, configuration files will also be searched for in directories
+reserved for system use. These are to separate configuration files from
+the vendor or 3rd party packages from those of local administration.
+These files are found in the following directories:
+.PP
+.RS 4
+.nf
+.I /usr/share/X11/__xconfigdir__
+.I __datadir__/X11/__xconfigdir__
+.fi
+.RE
+.PP
+The
+.I __xconfigfile__
+and
+.I __xconfigdir__
+files are composed of a number of sections which may be present in any order,
+or omitted to use default configuration values.
+Each section has the form:
+.PP
+.RS 4
+.nf
+.BI "Section  \*q" SectionName \*q
+.RI "    " SectionEntry
+    ...
+.B EndSection
+.fi
+.RE
+.PP
+The section names are:
+.PP
+.RS 4
+.nf
+.BR "Files          " "File pathnames"
+.BR "ServerFlags    " "Server flags"
+.BR "Module         " "Dynamic module loading"
+.BR "Extensions     " "Extension enabling"
+.BR "InputDevice    " "Input device description"
+.BR "InputClass     " "Input class description"
+.BR "Device         " "Graphics device description"
+.BR "VideoAdaptor   " "Xv video adaptor description"
+.BR "Monitor        " "Monitor description"
+.BR "Modes          " "Video modes descriptions"
+.BR "Screen         " "Screen configuration"
+.BR "ServerLayout   " "Overall layout"
+.BR "DRI            " "DRI\-specific configuration"
+.BR "Vendor         " "Vendor\-specific configuration"
+.fi
+.RE
+.PP
+The following obsolete section names are still recognised for compatibility
+purposes.
+In new config files, the
+.B InputDevice
+section should be used instead.
+.PP
+.RS 4
+.nf
+.BR "Keyboard       " "Keyboard configuration"
+.BR "Pointer        " "Pointer/mouse configuration"
+.fi
+.RE
+.PP
+The old
+.B XInput
+section is no longer recognised.
+.PP
+The
+.B ServerLayout
+sections are at the highest level.
+They bind together the input and output devices that will be used in a session.
+The input devices are described in the
+.B InputDevice
+sections.
+Output devices usually consist of multiple independent components (e.g.,
+a graphics board and a monitor).
+These multiple components are bound together in the
+.B Screen
+sections, and it is these that are referenced by the
+.B ServerLayout
+section.
+Each
+.B Screen
+section binds together a graphics board and a monitor.
+The graphics boards are described in the
+.B Device
+sections, and the monitors are described in the
+.B Monitor
+sections.
+.PP
+Config file keywords are case\-insensitive, and \(lq_\(rq characters are
+ignored.
+Most strings (including
+.B Option
+names) are also case-insensitive, and insensitive to white space and
+\(lq_\(rq characters.
+.PP
+Each config file entry usually takes up a single line in the file.  They
+consist of a keyword, which is possibly followed by one or more arguments,
+with the number and types of the arguments depending on the keyword.
+The argument types are:
+.PP
+.RS 4
+.nf
+.BR "Integer     " "an integer number in decimal, hex or octal"
+.BR "Real        " "a floating point number"
+.BR "String      " "a string enclosed in double quote marks (\*q)"
+.fi
+.RE
+.PP
+Note: hex integer values must be prefixed with \(lq0x\(rq, and octal values
+with \(lq0\(rq.
+.PP
+A special keyword called
+.B Option
+may be used to provide free\-form data to various components of the server.
+The
+.B Option
+keyword takes either one or two string arguments.
+The first is the option name, and the optional second argument is the
+option value.
+Some commonly used option value types include:
+.PP
+.RS 4
+.nf
+.BR "Integer     " "an integer number in decimal, hex or octal"
+.BR "Real        " "a floating point number"
+.BR "String      " "a sequence of characters"
+.BR "Boolean     " "a boolean value (see below)"
+.BR "Frequency   " "a frequency value (see below)"
+.fi
+.RE
+.PP
+Note that
+.I all
+.B Option
+values, not just strings, must be enclosed in quotes.
+.PP
+Boolean options may optionally have a value specified.
+When no value is specified, the option's value is
+.BR TRUE .
+The following boolean option values are recognised as
+.BR TRUE :
+.PP
+.RS 4
+.BR 1 ,
+.BR on ,
+.BR true ,
+.B yes
+.RE
+.PP
+and the following boolean option values are recognised as
+.BR FALSE :
+.PP
+.RS 4
+.BR 0 ,
+.BR off ,
+.BR false ,
+.B no
+.RE
+.PP
+If an option name is prefixed with
+.RB \*q No \*q,
+then the option value is negated.
+.PP
+Example: the following option entries are equivalent:
+.PP
+.RS 4
+.nf
+.B "Option \*qAccel\*q   \*qOff\*q"
+.B "Option \*qNoAccel\*q"
+.B "Option \*qNoAccel\*q \*qOn\*q"
+.B "Option \*qAccel\*q   \*qfalse\*q"
+.B "Option \*qAccel\*q   \*qno\*q"
+.fi
+.RE
+.PP
+Frequency option values consist of a real number that is optionally
+followed by one of the following frequency units:
+.PP
+.RS 4
+.BR Hz ,
+.BR k ,
+.BR kHz ,
+.BR M ,
+.B MHz
+.RE
+.PP
+When the unit name is omitted, the correct units will be determined from
+the value and the expectations of the appropriate range of the value.
+It is recommended that the units always be specified when using frequency
+option values to avoid any errors in determining the value.
+.SH "FILES SECTION"
+The
+.B Files
+section is used to specify some path names required by the server.
+Some of these paths can also be set from the command line (see
+.BR Xserver (__appmansuffix__)
+and
+.BR __xservername__ (__appmansuffix__)).
+The command line settings override the values specified in the config
+file.
+The
+.B Files
+section is optional, as are all of the entries that may appear in it.
+.PP
+The entries that can appear in this section are:
+.TP 7
+.BI "FontPath \*q" path \*q
+sets the search path for fonts.
+This path is a comma separated list of font path elements which the __xservername__
+server searches for font databases.
+Multiple
+.B FontPath
+entries may be specified, and they will be concatenated to build up the
+fontpath used by the server.  Font path elements can be absolute
+directory paths, catalogue directories or a font server identifier. The
+formats of the later two are explained below:
+.PP
+.RS 7
+Catalogue directories:
+.PP
+.RS 4
+Catalogue directories can be specified using the prefix \fBcatalogue:\fR
+before the directory name. The directory can then be populated with
+symlinks pointing to the real font directories, using the following
+syntax in the symlink name:
+.PP
+.RS 4
+.IR <identifier> : [attribute]: pri= <priority>
+.RE
+.PP
+where
+.I <identifier>
+is an alphanumeric identifier,
+.I [attribute]
+is an attribute which will be passed to the underlying FPE and
+.I <priority>
+is a number used to order the fontfile FPEs. Examples:
+.PP
+.RS 4
+.nf
+.I 75dpi:unscaled:pri=20  -> /usr/share/X11/fonts/75dpi
+.I gscript:pri=60 -> /usr/share/fonts/default/ghostscript
+.I misc:unscaled:pri=10 \-> /usr/share/X11/fonts/misc
+.fi
+.PP
+.RE .RE .RE
+.PP
+.RS 7
+Font server identifiers:
+.PP
+.RS 4
+Font server identifiers have the form:
+.RS 4
+.PP
+.IR <trans> / <hostname> : <port\-number>
+.RE
+.PP
+where
+.I <trans>
+is the transport type to use to connect to the font server (e.g.,
+.B unix
+for UNIX\-domain sockets or
+.B tcp
+for a TCP/IP connection),
+.I <hostname>
+is the hostname of the machine running the font server, and
+.I <port\-number>
+is the port number that the font server is listening on (usually 7100).
+.RE
+.PP
+When this entry is not specified in the config file, the server falls back
+to the compiled\-in default font path, which contains the following
+font path elements (which can be set inside a catalogue directory):
+.PP
+.RS 4
+.nf
+.I __datadir__/fonts/X11/misc/
+.I __datadir__/fonts/X11/TTF/
+.I __datadir__/fonts/X11/OTF/
+.I __datadir__/fonts/X11/Type1/
+.I __datadir__/fonts/X11/100dpi/
+.I __datadir__/fonts/X11/75dpi/
+.fi
+.RE
+.PP
+Font path elements that are found to be invalid are removed from the
+font path when the server starts up.
+.RE
+.TP 7
+.BI "ModulePath \*q" path \*q
+sets the search path for loadable __xservername__ server modules.
+This path is a comma separated list of directories which the __xservername__ server
+searches for loadable modules loading in the order specified.
+Multiple
+.B ModulePath
+entries may be specified, and they will be concatenated to build the
+module search path used by the server.  The default module path is
+.PP
+.RS 11
+__modulepath__
+.RE
+.\" The LogFile keyword is not currently implemented
+.ig
+.TP 7
+.BI "LogFile \*q" path \*q
+sets the name of the __xservername__ server log file.
+The default log file name is
+.PP
+.RS 11
+.RI __logdir__/__xservername__. <n> .log
+.RE
+.PP
+.RS 7
+where
+.I <n>
+is the display number for the __xservername__ server.
+..
+.TP 7
+.BI "XkbDir \*q" path \*q
+sets the base directory for keyboard layout files.  The
+.B \-xkbdir
+command line option can be used to override this.  The default directory is
+.PP
+.RS 11
+__xkbdir__
+.RE
+.SH "SERVERFLAGS SECTION"
+In addition to options specific to this section (described below), the
+.B ServerFlags
+section is used to specify some global
+__xservername__ server options.
+All of the entries in this section are
+.BR Options ,
+although for compatibility purposes some of the old style entries are
+still recognised.
+Those old style entries are not documented here, and using them is
+discouraged.
+The
+.B ServerFlags
+section is optional, as are the entries that may be specified in it.
+.PP
+.B Options
+specified in this section (with the exception of the
+.B \*qDefaultServerLayout\*q
+.BR Option )
+may be overridden by
+.B Options
+specified in the active
+.B ServerLayout
+section.
+Options with command line equivalents are overridden when their command
+line equivalent is used.
+The options recognised by this section are:
+.TP 7
+.BI "Option \*qDefaultServerLayout\*q  \*q" layout\-id \*q
+This specifies the default
+.B ServerLayout
+section to use in the absence of the
+.B \-layout
+command line option.
+.TP 7
+.BI "Option \*qNoTrapSignals\*q  \*q" boolean \*q
+This prevents the __xservername__ server from trapping a range of unexpected fatal
+signals and exiting cleanly.
+Instead, the __xservername__ server will die and drop core where the fault occurred.
+The default behaviour is for the __xservername__ server to exit cleanly, but still drop a
+core file.
+In general you never want to use this option unless you are debugging an __xservername__
+server problem and know how to deal with the consequences.
+.TP 7
+.BI "Option \*qUseSIGIO\*q  \*q" boolean \*q
+This controls whether the __xservername__ server requests that events from
+input devices be reported via a SIGIO signal handler (also known as SIGPOLL
+on some platforms), or only reported via the standard select(3) loop.
+The default behaviour is platform specific.   In general you do not want to
+use this option unless you are debugging the __xservername__ server, or
+working around a specific bug until it is fixed, and understand the
+consequences.
+.TP 7
+.BI "Option \*qDontVTSwitch\*q  \*q" boolean \*q
+This disallows the use of the
+.BI Ctrl+Alt+F n
+sequence (where
+.RI F n
+refers to one of the numbered function keys).
+That sequence is normally used to switch to another \*qvirtual terminal\*q
+on operating systems that have this feature.
+When this option is enabled, that key sequence has no special meaning and
+is passed to clients.
+Default: off.
+.TP 7
+.BI "Option \*qDontZap\*q  \*q" boolean \*q
+This disallows the use of the
+.B Terminate_Server
+XKB action (usually on Ctrl+Alt+Backspace, depending on XKB options).
+This action is normally used to terminate the __xservername__ server.
+When this option is enabled, the action has no effect.
+Default: off.
+.TP 7
+.BI "Option \*qDontZoom\*q  \*q" boolean \*q
+This disallows the use of the
+.B Ctrl+Alt+Keypad\-Plus
+and
+.B Ctrl+Alt+Keypad\-Minus
+sequences.
+These sequences allows you to switch between video modes.
+When this option is enabled, those key sequences have no special meaning
+and are passed to clients.
+Default: off.
+.TP 7
+.BI "Option \*qDisableVidModeExtension\*q  \*q" boolean \*q
+This disables the parts of the VidMode extension used by the xvidtune client
+that can be used to change the video modes.
+Default: the VidMode extension is enabled.
+.TP 7
+.BI "Option \*qAllowNonLocalXvidtune\*q  \*q" boolean \*q
+This allows the xvidtune client (and other clients that use the VidMode
+extension) to connect from another host.
+Default: off.
+.TP 7
+.BI "Option \*qAllowMouseOpenFail\*q  \*q" boolean \*q
+This tells the mousedrv(__drivermansuffix__) and vmmouse(__drivermansuffix__)
+drivers to not report failure if the mouse device can't be opened/initialised.
+It has no effect on the evdev(__drivermansuffix__) or other drivers.
+Default: false.
+.TP 7
+.BI "Option \*qVTSysReq\*q  \*q" boolean \*q
+enables the SYSV\-style VT switch sequence for non\-SYSV systems
+which support VT switching.
+This sequence is
+.B Alt\-SysRq
+followed by a function key
+.RB ( Fn ).
+This prevents the __xservername__ server trapping the
+keys used for the default VT switch sequence, which means that clients can
+access them.
+Default: off.
+.TP 7
+.BI "Option \*qBlankTime\*q  \*q" time \*q
+sets the inactivity timeout for the
+.B blank
+phase of the screensaver.
+.I time
+is in minutes.
+This is equivalent to the __xservername__ server's
+.B \-s
+flag, and the value can be changed at run\-time with
+.BR xset(__appmansuffix__).
+Default: 10 minutes.
+.TP 7
+.BI "Option \*qStandbyTime\*q  \*q" time \*q
+sets the inactivity timeout for the
+.B standby
+phase of DPMS mode.
+.I time
+is in minutes, and the value can be changed at run\-time with
+.BR xset(__appmansuffix__).
+Default: 10 minutes.
+This is only suitable for VESA DPMS compatible monitors, and may not be
+supported by all video drivers.
+It is only enabled for screens that have the
+.B \*qDPMS\*q
+option set (see the MONITOR section below).
+.TP 7
+.BI "Option \*qSuspendTime\*q  \*q" time \*q
+sets the inactivity timeout for the
+.B suspend
+phase of DPMS mode.
+.I time
+is in minutes, and the value can be changed at run\-time with
+.BR xset(__appmansuffix__).
+Default: 10 minutes.
+This is only suitable for VESA DPMS compatible monitors, and may not be
+supported by all video drivers.
+It is only enabled for screens that have the
+.B \*qDPMS\*q
+option set (see the MONITOR section below).
+.TP 7
+.BI "Option \*qOffTime\*q  \*q" time \*q
+sets the inactivity timeout for the
+.B off
+phase of DPMS mode.
+.I time
+is in minutes, and the value can be changed at run\-time with
+.BR xset(__appmansuffix__).
+Default: 10 minutes.
+This is only suitable for VESA DPMS compatible monitors, and may not be
+supported by all video drivers.
+It is only enabled for screens that have the
+.B \*qDPMS\*q
+option set (see the MONITOR section below).
+.TP 7
+.BI "Option \*qPixmap\*q  \*q" bpp \*q
+This sets the pixmap format to use for depth 24.
+Allowed values for
+.I bpp
+are 24 and 32.
+Default: 32 unless driver constraints don't allow this (which is rare).
+Note: some clients don't behave well when this value is set to 24.
+.TP 7
+.BI "Option \*qPC98\*q  \*q" boolean \*q
+Specify that the machine is a Japanese PC\-98 machine.
+This should not be enabled for anything other than the Japanese\-specific
+PC\-98 architecture.
+Default: auto\-detected.
+.TP 7
+.BI "Option \*qNoPM\*q  \*q" boolean \*q
+Disables something to do with power management events.
+Default: PM enabled on platforms that support it.
+.TP 7
+.BI "Option \*qXinerama\*q  \*q" boolean \*q
+enable or disable XINERAMA extension.
+Default is disabled.
+.TP 7
+.BI "Option \*qAIGLX\*q \*q" boolean \*q
+enable or disable AIGLX. AIGLX is enabled by default.
+.TP 7
+.BI "Option \*qDRI2\*q \*q" boolean \*q
+enable or disable DRI2. DRI2 is disabled by default.
+.TP 7
+.BI "Option \*qGlxVisuals\*q \*q" string \*q
+This option controls how many GLX visuals the GLX modules sets up.
+The default value is
+.BR "typical" ,
+which will setup up a typical subset of
+the GLXFBConfigs provided by the driver as GLX visuals.  Other options are
+.BR "minimal" ,
+which will set up the minimal set allowed by the GLX specification and
+.BR "all"
+which will setup GLX visuals for all GLXFBConfigs.
+.TP 7
+.BI "Option \*qUseDefaultFontPath\*q \*q" boolean \*q
+Include the default font path even if other paths are specified in
+xorg.conf. If enabled, other font paths are included as well. Enabled by
+default.
+.TP 7
+.BI "Option \*qIgnoreABI\*q \*q" boolean \*q
+Allow modules built for a different, potentially incompatible version of
+the X server to load. Disabled by default.
+.TP 7
+.BI "Option \*qAutoAddDevices\*q \*q" boolean \*q
+If this option is disabled, then no devices will be added from HAL events.
+Enabled by default.
+.TP 7
+.BI "Option \*qAutoEnableDevices\*q \*q" boolean \*q
+If this option is disabled, then the devices will be added (and the
+DevicePresenceNotify event sent), but not enabled, thus leaving policy up
+to the client.
+Enabled by default.
+.TP 7
+.BI "Option \*qLog\*q \*q" string \*q
+This option controls whether the log is flushed and/or synced to disk after
+each message.
+Possible values are
+.B flush
+or
+.BR sync .
+Unset by default.
+.SH "MODULE SECTION"
+The
+.B Module
+section is used to specify which __xservername__ server modules should be loaded.
+This section is ignored when the __xservername__ server is built in static form.
+The type of modules normally loaded in this section are __xservername__ server
+extension modules.
+Most other module types are loaded automatically when they are needed via
+other mechanisms.
+The
+.B Module
+section is optional, as are all of the entries that may be specified in
+it.
+.PP
+Entries in this section may be in two forms.
+The first and most commonly used form is an entry that uses the
+.B Load
+keyword, as described here:
+.TP 7
+.BI "Load  \*q" modulename \*q
+This instructs the server to load the module called
+.IR modulename .
+The module name given should be the module's standard name, not the
+module file name.
+The standard name is case\-sensitive, and does not include the \(lqlib\(rq
+prefix, or the \(lq.a\(rq, \(lq.o\(rq, or \(lq.so\(rq suffixes.
+.PP
+.RS 7
+Example: the DRI extension module can be loaded with the following entry:
+.PP
+.RS 4
+.B "Load \*qdri\*q"
+.RE
+.RE
+.TP 7
+.BI "Disable  \*q" modulename \*q
+This instructs the server to not load the module called
+.IR modulename .
+Some modules are loaded by default in the server, and this overrides that
+default. If a
+.B Load
+instruction is given for the same module, it overrides the
+.B Disable
+instruction and the module is loaded. The module name given should be the
+module's standard name, not the module file name. As with the
+.B Load
+instruction, the standard name is case-sensitive, and does not include the
+"lib" prefix, or the ".a", ".o", or ".so" suffixes.
+.PP
+The second form of entry is a
+.BR SubSection,
+with the subsection name being the module name, and the contents of the
+.B SubSection
+being
+.B Options
+that are passed to the module when it is loaded.
+.PP
+Example: the extmod module (which contains a miscellaneous group of
+server extensions) can be loaded, with the XFree86\-DGA extension
+disabled by using the following entry:
+.PP
+.RS 4
+.nf
+.B "SubSection \*qextmod\*q"
+.B "   Option  \*qomit XFree86\-DGA\*q"
+.B EndSubSection
+.fi
+.RE
+.PP
+Modules are searched for in each directory specified in the
+.B ModulePath
+search path, and in the drivers, extensions, input, internal, and
+multimedia subdirectories of each of those directories.
+In addition to this, operating system specific subdirectories of all
+the above are searched first if they exist.
+.PP
+To see what extension modules are available, check the extensions
+subdirectory under:
+.PP
+.RS 4
+.nf
+__modulepath__
+.fi
+.RE
+.PP
+The \(lqextmod\(rq, \(lqdbe\(rq, \(lqdri\(rq, \(lqdri2\(rq, \(lqglx\(rq,
+and \(lqrecord\(rq extension modules are loaded automatically, if they
+are present, unless disabled with \*qDisable\*q entries.
+It is recommended
+that at very least the \(lqextmod\(rq extension module be loaded.
+If it isn't, some commonly used server extensions (like the SHAPE
+extension) will not be available.
+.SH "EXTENSIONS SECTION"
+The
+.B Extensions
+section is used to specify which X11 protocol extensions should be enabled
+or disabled.
+The
+.B Extensions
+section is optional, as are all of the entries that may be specified in
+it.
+.PP
+Entries in this section are listed as Option statements with the name of
+the extension as the first argument, and a boolean value as the second.
+The extension name is case\-sensitive, and matches the form shown in the output
+of \*qXorg -extension ?\*q.
+.PP
+.RS 7
+Example: the MIT-SHM extension can be disabled with the following entry:
+.PP
+.RS 4
+.nf
+.B "Section \*qExtensions\*q"
+.B "    Option \*qMIT-SHM\*q \*qDisable\*q"
+.B "EndSection"
+.fi
+.RE
+.RE
+.SH "INPUTDEVICE SECTION"
+The config file may have multiple
+.B InputDevice
+sections.
+Recent X servers employ HAL or udev backends for input device enumeration
+and input hotplugging. It is usually not
+necessary to provide
+.B InputDevice
+sections in the xorg.conf if hotplugging is in use. If hotplugging is
+enabled,
+.B InputDevice
+sections using the
+.B mouse, kbd
+and
+.B vmmouse
+driver will be ignored.
+.PP
+If hotplugging is disabled, there will normally
+be at least two: one for the core (primary) keyboard
+and one for the core pointer.
+If either of these two is missing, a default configuration for the missing
+ones will be used. In the absence of an explicitly specified core input
+device, the first
+.B InputDevice
+marked as
+.B CorePointer
+(or
+.BR CoreKeyboard )
+is used.
+If there is no match there, the first
+.B InputDevice
+that uses the \(lqmouse\(rq (or \(lqkbd\(rq) driver is used.
+The final fallback is to use built\-in default configurations.
+Currently the default configuration may not work as expected on all platforms.
+.PP
+.B InputDevice
+sections have the following format:
+.PP
+.RS 4
+.nf
+.B  "Section \*qInputDevice\*q"
+.BI "    Identifier \*q" name \*q
+.BI "    Driver     \*q" inputdriver \*q
+.I  "    options"
+.I  "    ..."
+.B  "EndSection"
+.fi
+.RE
+.PP
+The
+.B Identifier
+and
+.B Driver
+entries are required in all
+.B InputDevice
+sections.
+All other entries are optional.
+.PP
+The
+.B Identifier
+entry specifies the unique name for this input device.
+The
+.B Driver
+entry specifies the name of the driver to use for this input device.
+When using the loadable server, the input driver module
+.RI \*q inputdriver \*q
+will be loaded for each active
+.B InputDevice
+section.
+An
+.B InputDevice
+section is considered active if it is referenced by an active
+.B ServerLayout
+section, if it is referenced by the
+.B \-keyboard
+or
+.B \-pointer
+command line options, or if it is selected implicitly as the core pointer
+or keyboard device in the absence of such explicit references.
+The most commonly used input drivers are
+.BR evdev (__drivermansuffix__)
+on Linux systems, and
+.BR kbd (__drivermansuffix__)
+and
+.BR mousedrv (__drivermansuffix__)
+on other platforms.
+.PP
+.PP
+.B InputDevice
+sections recognise some driver\-independent
+.BR Options ,
+which are described here.
+See the individual input driver manual pages for a description of the
+device\-specific options.
+.TP 7
+.BI "Option \*qAutoServerLayout\*q  \*q" boolean \*q
+Always add the device to the ServerLayout section used by this instance of
+the server. This affects implied layouts as well as explicit layouts
+specified in the configuration and/or on the command line.
+.TP 7
+.BI "Option \*qCorePointer\*q"
+Deprecated, see
+.B Floating
+.TP 7
+.BI "Option \*qCoreKeyboard\*q"
+Deprecated, see
+.B Floating
+.TP 7
+.BI "Option \*qAlwaysCore\*q  \*q" boolean \*q
+Deprecated, see
+.B Floating
+.TP 7
+.BI "Option \*qSendCoreEvents\*q  \*q" boolean \*q
+Deprecated, see
+.B Floating
+
+.TP 7
+.BI "Option \*qFloating\*q  \*q" boolean \*q
+When enabled, the input device is set up floating and does not
+report events through any master device or control a cursor. The device is
+only available to clients using the X Input Extension API. This option is
+disabled by default.
+The options
+.B CorePointer,
+.B CoreKeyboard,
+.B AlwaysCore,
+and
+.B SendCoreEvents,
+are the inverse of option
+.B Floating
+(i.e.
+.B SendCoreEvents \*qon\*q
+is equivalent to
+.B Floating \*qoff\*q
+).
+
+This option controls the startup behavior only, a device
+may be reattached or set floating at runtime.
+.PP
+For pointing devices, the following options control how the pointer
+is accelerated or decelerated with respect to physical device motion. Most of
+these can be adjusted at runtime, see the xinput(1) man page for details. Only
+the most important acceleration options are discussed here.
+.TP 7
+.BI "Option \*qAccelerationProfile\*q  \*q" integer \*q
+Select the profile. In layman's terms, the profile constitutes the "feeling" of
+the acceleration. More formally, it defines how the transfer function (actual
+acceleration as a function of current device velocity and acceleration controls)
+is constructed. This is mainly a matter of personal preference.
+.PP
+.RS 6
+.nf
+.B  " 0      classic (mostly compatible)"
+.B  "-1      none (only constant deceleration is applied)"
+.B  " 1      device-dependent"
+.B  " 2      polynomial (polynomial function)"
+.B  " 3      smooth linear (soft knee, then linear)"
+.B  " 4      simple (normal when slow, otherwise accelerated)"
+.B  " 5      power (power function)"
+.B  " 6      linear (more speed, more acceleration)"
+.B  " 7      limited (like linear, but maxes out at threshold)"
+.fi
+.RE
+.TP 7
+.BI "Option \*qConstantDeceleration\*q  \*q" real \*q
+Makes the pointer go
+.B deceleration
+times slower than normal. Most useful for high-resolution devices.
+.TP 7
+.BI "Option \*qAdaptiveDeceleration\*q  \*q" real \*q
+Allows to actually decelerate the pointer when going slow. At most, it will be
+.B adaptive deceleration
+times slower. Enables precise pointer placement without sacrificing speed.
+.TP 7
+.BI "Option \*qAccelerationScheme\*q  \*q" string \*q
+Selects the scheme, which is the underlying algorithm.
+.PP
+.RS 7
+.nf
+.B  "predictable   default algorithm (behaving more predictable)"
+.B  "lightweight   old acceleration code (as specified in the X protocol spec)"
+.B  "none          no acceleration or deceleration"
+.fi
+.RE
+.TP 7
+.BI "Option \*qAccelerationNumerator\*q  \*q" integer \*q
+.TP 7
+.BI "Option \*qAccelerationDenominator\*q  \*q" integer \*q
+Set numerator and denominator of the acceleration factor. The acceleration
+factor is a rational which, together with threshold, can be used to tweak
+profiles to suit the users needs. The
+.B simple
+and
+.B limited
+profiles use it directly (i.e. they accelerate by the factor), for other
+profiles it should hold that a higher acceleration factor leads to a faster
+pointer. Typically, 1 is unaccelerated and values up to 5 are sensible.
+.TP 7
+.BI "Option \*qAccelerationThreshold\*q  \*q" integer \*q
+Set the threshold, which is roughly the velocity (usually device units per 10
+ms) required for acceleration to become effective. The precise effect varies
+with the profile however.
+
+.SH "INPUTCLASS SECTION"
+The config file may have multiple
+.B InputClass
+sections.
+These sections are optional and are used to provide configuration for a
+class of input devices as they are automatically added. An input device can
+match more than one
+.B InputClass
+section. Each class can override settings from a previous class, so it is
+best to arrange the sections with the most generic matches first.
+.PP
+.B InputClass
+sections have the following format:
+.PP
+.RS 4
+.nf
+.B  "Section \*qInputClass\*q"
+.BI "    Identifier  \*q" name \*q
+.I  "    entries"
+.I  "    ..."
+.I  "    options"
+.I  "    ..."
+.B  "EndSection"
+.fi
+.RE
+.PP
+The
+.B Identifier
+entry is required in all
+.B InputClass
+sections.
+All other entries are optional.
+.PP
+The
+.B Identifier
+entry specifies the unique name for this input class.
+The
+.B Driver
+entry specifies the name of the driver to use for this input device.
+After all classes have been examined, the
+.RI \*q inputdriver \*q
+module from the first
+.B Driver
+entry will be enabled when using the loadable server.
+.PP
+When an input device is automatically added, its characteristics are
+checked against all
+.B InputClass
+sections. Each section can contain optional entries to narrow the match
+of the class. If none of the optional entries appear, the
+.B InputClass
+section is generic and will match any input device. If more than one of
+these entries appear, they all must match for the configuration to apply.
+.PP
+There are two types of match entries used in
+.B InputClass
+sections. The first allows various tokens to be matched against attributes
+of the device. An entry can be constructed to match attributes from different
+devices by separating arguments with a '|' character. Multiple entries of the
+same type may be supplied to add multiple matching conditions on the same
+attribute. For example:
+.PP
+.RS 4
+.nf
+.B  "Section \*qInputClass\*q"
+.B  "    Identifier   \*qMy Class\*q"
+.B  "    # product string must contain example and
+.B  "    # either gizmo or gadget
+.B  "    MatchProduct \*qexample\*q
+.B  "    MatchProduct \*qgizmo|gadget\*q
+.I  "    ..."
+.B  "EndSection"
+.fi
+.RE
+.TP 7
+.BI "MatchProduct  \*q" matchproduct \*q
+This entry can be used to check if the substring
+.RI \*q matchproduct \*q
+occurs in the device's product name.
+.TP 7
+.BI "MatchVendor  \*q" matchvendor \*q
+This entry can be used to check if the substring
+.RI \*q matchvendor \*q
+occurs in the device's vendor name.
+.TP 7
+.BI "MatchDevicePath \*q" matchdevice \*q
+This entry can be used to check if the device file matches the
+.RI \*q matchdevice \*q
+pathname pattern.
+.TP 7
+.BI "MatchOS \*q" matchos \*q
+This entry can be used to check if the operating system matches the
+case-insensitive
+.RI \*q matchos \*q
+string. This entry is only supported on platforms providing the
+.BR uname (2)
+system call.
+.TP 7
+.BI "MatchPnPID \*q" matchpnp \*q
+The device's Plug and Play (PnP) ID can be checked against the
+.RI \*q matchpnp \*q
+shell wildcard pattern.
+.TP 7
+.BI "MatchUSBID \*q" matchusb \*q
+The device's USB ID can be checked against the
+.RI \*q matchusb \*q
+shell wildcard pattern. The ID is constructed as lowercase hexadecimal numbers
+separated by a ':'. This is the same format as the
+.BR lsusb (8)
+program.
+.TP 7
+.BI "MatchDriver \*q" matchdriver \*q
+Check the case-sensitive string
+.RI \*q matchdriver \*q
+against the currently configured driver of the device. Ordering of sections
+using this entry is important since it will not match unless the driver has
+been set by the config backend or a previous
+.B InputClass
+section.
+.TP 7
+.BI "MatchTag \*q" matchtag \*q
+This entry can be used to check if tags assigned by the config backend
+matches the
+.RI \*q matchtag \*q
+pattern. A match is found if at least one of the tags given in
+.RI \*q matchtag \*q
+matches at least one of the tags assigned by the backend.
+.PP
+The second type of entry is used to match device types. These entries take a
+boolean argument similar to
+.B Option
+entries.
+.TP 7
+.BI "MatchIsKeyboard     \*q" bool \*q
+.TP 7
+.BI "MatchIsPointer      \*q" bool \*q
+.TP 7
+.BI "MatchIsJoystick     \*q" bool \*q
+.TP 7
+.BI "MatchIsTablet       \*q" bool \*q
+.TP 7
+.BI "MatchIsTouchpad     \*q" bool \*q
+.TP 7
+.BI "MatchIsTouchscreen  \*q" bool \*q
+.PP
+When an input device has been matched to the
+.B InputClass
+section, any
+.B Option
+entries are applied to the device. One
+.B InputClass
+specific
+.B Option
+is recognized. See the
+.B InputDevice
+section above for a description of the remaining
+.B Option
+entries.
+.TP 7
+.BI "Option \*qIgnore\*q \*q" boolean \*q
+This optional entry specifies that the device should be ignored entirely,
+and not added to the server. This can be useful when the device is handled
+by another program and no X events should be generated.
+.SH "DEVICE SECTION"
+The config file may have multiple
+.B Device
+sections.
+There must be at least one, for the video card being used.
+.PP
+.B Device
+sections have the following format:
+.PP
+.RS 4
+.nf
+.B  "Section \*qDevice\*q"
+.BI "    Identifier \*q" name \*q
+.BI "    Driver     \*q" driver \*q
+.I  "    entries"
+.I  "    ..."
+.B  "EndSection"
+.fi
+.RE
+.PP
+The
+.B Identifier
+and
+.B Driver
+entries are required in all
+.B Device
+sections.  All other entries are optional.
+.PP
+The
+.B Identifier
+entry specifies the unique name for this graphics device.
+The
+.B Driver
+entry specifies the name of the driver to use for this graphics device.
+When using the loadable server, the driver module
+.RI \*q driver \*q
+will be loaded for each active
+.B Device
+section.
+A
+.B Device
+section is considered active if it is referenced by an active
+.B Screen
+section.
+.PP
+.B Device
+sections recognise some driver\-independent entries and
+.BR Options ,
+which are described here.
+Not all drivers make use of these
+driver\-independent entries, and many of those that do don't require them
+to be specified because the information is auto\-detected.
+See the individual graphics driver manual pages for further information
+about this, and for a description of the device\-specific options.
+Note that most of the
+.B Options
+listed here (but not the other entries) may be specified in the
+.B Screen
+section instead of here in the
+.B Device
+section.
+.TP 7
+.BI "BusID  \*q" bus\-id \*q
+This specifies the bus location of the graphics card.
+For PCI/AGP cards,
+the
+.I bus\-id
+string has the form
+.BI PCI: bus : device : function
+(e.g., \(lqPCI:1:0:0\(rq might be appropriate for an AGP card).
+This field is usually optional in single-head configurations when using
+the primary graphics card.
+In multi-head configurations, or when using a secondary graphics card in a
+single-head configuration, this entry is mandatory.
+Its main purpose is to make an unambiguous connection between the device
+section and the hardware it is representing.
+This information can usually be found by running the pciaccess tool
+scanpci.
+.TP 7
+.BI "Screen  " number
+This option is mandatory for cards where a single PCI entity can drive more
+than one display (i.e., multiple CRTCs sharing a single graphics accelerator
+and video memory).
+One
+.B Device
+section is required for each head, and this
+parameter determines which head each of the
+.B Device
+sections applies to.
+The legal values of
+.I number
+range from 0 to one less than the total number of heads per entity.
+Most drivers require that the primary screen (0) be present.
+.TP 7
+.BI "Chipset  \*q" chipset \*q
+This usually optional entry specifies the chipset used on the graphics
+board.
+In most cases this entry is not required because the drivers will probe the
+hardware to determine the chipset type.
+Don't specify it unless the driver-specific documentation recommends that you
+do.
+.TP 7
+.BI "Ramdac  \*q" ramdac\-type \*q
+This optional entry specifies the type of RAMDAC used on the graphics
+board.
+This is only used by a few of the drivers, and in most cases it is not
+required because the drivers will probe the hardware to determine the
+RAMDAC type where possible.
+Don't specify it unless the driver-specific documentation recommends that you
+do.
+.TP 7
+.BI "DacSpeed  " speed
+.TP 7
+.BI "DacSpeed  " "speed\-8 speed\-16 speed\-24 speed\-32"
+This optional entry specifies the RAMDAC speed rating (which is usually
+printed on the RAMDAC chip).
+The speed is in MHz.
+When one value is given, it applies to all framebuffer pixel sizes.
+When multiple values are given, they apply to the framebuffer pixel sizes
+8, 16, 24 and 32 respectively.
+This is not used by many drivers, and only needs to be specified when the
+speed rating of the RAMDAC is different from the defaults built in to
+driver, or when the driver can't auto-detect the correct defaults.
+Don't specify it unless the driver-specific documentation recommends that you
+do.
+.TP 7
+.BI "Clocks  " "clock ..."
+specifies the pixel that are on your graphics board.
+The clocks are in MHz, and may be specified as a floating point number.
+The value is stored internally to the nearest kHz.
+The ordering of the clocks is important.
+It must match the order in which they are selected on the graphics board.
+Multiple
+.B Clocks
+lines may be specified, and each is concatenated to form the list.
+Most drivers do not use this entry, and it is only required for some older
+boards with non-programmable clocks.
+Don't specify this entry unless the driver-specific documentation explicitly
+recommends that you do.
+.TP
+.BI "ClockChip  \*q" clockchip\-type \*q
+This optional entry is used to specify the clock chip type on graphics
+boards which have a programmable clock generator.
+Only a few __xservername__ drivers support programmable clock chips.
+For details, see the appropriate driver manual page.
+.TP 7
+.BI "VideoRam  " "mem"
+This optional entry specifies the amount of video ram that is installed
+on the graphics board.
+This is measured in kBytes.
+In most cases this is not required because the __xservername__ server probes
+the graphics board to determine this quantity.
+The driver-specific documentation should indicate when it might be needed.
+.TP 7
+.BI "BiosBase  " "baseaddress"
+This optional entry specifies the base address of the video BIOS for
+the VGA board.
+This address is normally auto-detected, and should only be specified if the
+driver-specific documentation recommends it.
+.TP 7
+.BI "MemBase  " "baseaddress"
+This optional entry specifies the memory base address of a graphics
+board's linear frame buffer.
+This entry is not used by many drivers, and it should only be specified if
+the driver-specific documentation recommends it.
+.TP 7
+.BI "IOBase  " "baseaddress"
+This optional entry specifies the IO base address.
+This entry is not used by many drivers, and it should only be specified if
+the driver-specific documentation recommends it.
+.TP 7
+.BI "ChipID  " "id"
+This optional entry specifies a numerical ID representing the chip type.
+For PCI cards, it is usually the device ID.
+This can be used to override the auto-detection, but that should only be done
+when the driver-specific documentation recommends it.
+.TP 7
+.BI "ChipRev  " "rev"
+This optional entry specifies the chip revision number.
+This can be used to override the auto-detection, but that should only be done
+when the driver-specific documentation recommends it.
+.TP 7
+.BI "TextClockFreq  " "freq"
+This optional entry specifies the pixel clock frequency that is used
+for the regular text mode.
+The frequency is specified in MHz.
+This is rarely used.
+.TP 7
+.BI "Option \*qModeDebug\*q \*q" boolean \*q
+Enable printing of additional debugging information about modesetting to
+the server log.
+.ig
+.TP 7
+This optional entry allows an IRQ number to be specified.
+..
+.TP 7
+.B Options
+Option flags may be specified in the
+.B Device
+sections.
+These include driver\-specific options and driver\-independent options.
+The former are described in the driver\-specific documentation.
+Some of the latter are described below in the section about the
+.B Screen
+section, and they may also be included here.
+
+.SH "VIDEOADAPTOR SECTION"
+Nobody wants to say how this works.
+Maybe nobody knows ...
+
+.SH "MONITOR SECTION"
+The config file may have multiple
+.B Monitor
+sections.
+There should normally be at least one, for the monitor being used,
+but a default configuration will be created when one isn't specified.
+.PP
+.B Monitor
+sections have the following format:
+.PP
+.RS 4
+.nf
+.B  "Section \*qMonitor\*q"
+.BI "    Identifier \*q" name \*q
+.I  "    entries"
+.I  "    ..."
+.B  "EndSection"
+.fi
+.RE
+.PP
+The only mandatory entry in a
+.B Monitor
+section is the
+.B Identifier
+entry.
+.PP
+The
+.B Identifier
+entry specifies the unique name for this monitor.
+The
+.B Monitor
+section may be used to provide information about the specifications of the
+monitor, monitor-specific
+.BR Options ,
+and information about the video modes to use with the monitor.
+.PP
+With RandR 1.2-enabled drivers, monitor sections may be tied to specific
+outputs of the video card.  Using the name of the output defined by the video
+driver plus the identifier of a monitor section, one associates a monitor
+section with an output by adding an option to the Device section in the
+following format:
+
+.B Option \*qMonitor-outputname\*q \*qmonitorsection\*q
+
+(for example,
+.B Option \*qMonitor-VGA\*q \*qVGA monitor\*q
+for a VGA output)
+.PP
+In the absence of specific association of monitor sections to outputs, if a
+monitor section is present the server will associate it with an output to
+preserve compatibility for previous single-head configurations.
+.PP
+Specifying video modes is optional because the server will use the DDC or other
+information provided by the monitor to automatically configure the list of
+modes available.
+When modes are specified explicitly in the
+.B Monitor
+section (with the
+.BR Modes ,
+.BR ModeLine ,
+or
+.B UseModes
+keywords), built-in modes with the same names are not included.
+Built-in modes with different names are, however, still implicitly included,
+when they meet the requirements of the monitor.
+.PP
+The entries that may be used in
+.B Monitor
+sections are described below.
+.TP 7
+.BI "VendorName  \*q" vendor \*q
+This optional entry specifies the monitor's manufacturer.
+.TP 7
+.BI "ModelName  \*q" model \*q
+This optional entry specifies the monitor's model.
+.TP 7
+.BI "HorizSync  " "horizsync\-range"
+gives the range(s) of horizontal sync frequencies supported by the
+monitor.
+.I horizsync\-range
+may be a comma separated list of either discrete values or ranges of
+values.
+A range of values is two values separated by a dash.
+By default the values are in units of kHz.
+They may be specified in MHz or Hz
+if
+.B MHz
+or
+.B Hz
+is added to the end of the line.
+The data given here is used by the __xservername__ server to determine if video
+modes are within the specifications of the monitor.
+This information should be available in the monitor's handbook.
+If this entry is omitted, a default range of 28\-33kHz is used.
+.TP 7
+.BI "VertRefresh  " "vertrefresh\-range"
+gives the range(s) of vertical refresh frequencies supported by the
+monitor.
+.I vertrefresh\-range
+may be a comma separated list of either discrete values or ranges of
+values.
+A range of values is two values separated by a dash.
+By default the values are in units of Hz.
+They may be specified in MHz or kHz
+if
+.B MHz
+or
+.B kHz
+is added to the end of the line.
+The data given here is used by the __xservername__ server to determine if video
+modes are within the specifications of the monitor.
+This information should be available in the monitor's handbook.
+If this entry is omitted, a default range of 43\-72Hz is used.
+.TP 7
+.BI "DisplaySize  " "width height"
+This optional entry gives the width and height, in millimetres, of the
+picture area of the monitor.
+If given this is used to calculate the horizontal and vertical pitch (DPI) of
+the screen.
+.TP 7
+.BI "Gamma  " "gamma\-value"
+.TP 7
+.BI "Gamma  " "red\-gamma green\-gamma blue\-gamma"
+This is an optional entry that can be used to specify the gamma correction
+for the monitor.
+It may be specified as either a single value or as three separate RGB values.
+The values should be in the range 0.1 to 10.0, and the default is 1.0.
+Not all drivers are capable of using this information.
+.TP 7
+.BI "UseModes  \*q" modesection\-id \*q
+Include the set of modes listed in the
+.B Modes
+section called
+.IR modesection\-id.
+This makes all of the modes defined in that section available for use by
+this monitor.
+.TP 7
+.BI "Mode  \*q" name \*q
+This is an optional multi-line entry that can be used to provide
+definitions for video modes for the monitor.
+In most cases this isn't necessary because the built-in set of VESA standard
+modes will be sufficient.
+The
+.B Mode
+keyword indicates the start of a multi-line video mode description.
+The mode description is terminated with the
+.B EndMode
+keyword.
+The mode description consists of the following entries:
+.RS 7
+.TP 4
+.BI "DotClock  " clock
+is the dot (pixel) clock rate to be used for the mode.
+.TP 4
+.BI "HTimings  " "hdisp hsyncstart hsyncend htotal"
+specifies the horizontal timings for the mode.
+.TP 4
+.BI "VTimings  " "vdisp vsyncstart vsyncend vtotal"
+specifies the vertical timings for the mode.
+.TP 4
+.BI "Flags  \*q" flag \*q " ..."
+specifies an optional set of mode flags, each of which is a separate
+string in double quotes.
+.B \*qInterlace\*q
+indicates that the mode is interlaced.
+.B \*qDoubleScan\*q
+indicates a mode where each scanline is doubled.
+.B \*q+HSync\*q
+and
+.B \*q\-HSync\*q
+can be used to select the polarity of the HSync signal.
+.B \*q+VSync\*q
+and
+.B \*q\-VSync\*q
+can be used to select the polarity of the VSync signal.
+.B \*qComposite\*q
+can be used to specify composite sync on hardware where this is supported.
+Additionally, on some hardware,
+.B \*q+CSync\*q
+and
+.B \*q\-CSync\*q
+may be used to select the composite sync polarity.
+.TP 4
+.BI "HSkew  " hskew
+specifies the number of pixels (towards the right edge of the screen) by
+which the display enable signal is to be skewed.
+Not all drivers use this information.
+This option might become necessary to override the default value supplied
+by the server (if any).
+\(lqRoving\(rq horizontal lines indicate this value needs to be increased.
+If the last few pixels on a scan line appear on the left of the screen,
+this value should be decreased.
+.TP 4
+.BI "VScan  " vscan
+specifies the number of times each scanline is painted on the screen.
+Not all drivers use this information.
+Values less than 1 are treated as 1, which is the default.
+Generally, the
+.B \*qDoubleScan\*q
+.B Flag
+mentioned above doubles this value.
+.RE
+.TP 7
+.BI "ModeLine  \*q" name \*q " mode\-description"
+This entry is a more compact version of the
+.B Mode
+entry, and it also can be used to specify video modes for the monitor.
+is a single line format for specifying video modes.
+In most cases this isn't necessary because the built\-in set of VESA
+standard modes will be sufficient.
+.PP
+.RS 7
+The
+.I mode\-description
+is in four sections, the first three of which are mandatory.
+The first is the dot (pixel) clock.
+This is a single number specifying the pixel clock rate for the mode in
+MHz.
+The second section is a list of four numbers specifying the horizontal
+timings.
+These numbers are the
+.IR hdisp ,
+.IR hsyncstart ,
+.IR hsyncend ,
+and
+.I htotal
+values.
+The third section is a list of four numbers specifying the vertical
+timings.
+These numbers are the
+.IR vdisp ,
+.IR vsyncstart ,
+.IR vsyncend ,
+and
+.I vtotal
+values.
+The final section is a list of flags specifying other characteristics of
+the mode.
+.B Interlace
+indicates that the mode is interlaced.
+.B DoubleScan
+indicates a mode where each scanline is doubled.
+.B +HSync
+and
+.B \-HSync
+can be used to select the polarity of the HSync signal.
+.B +VSync
+and
+.B \-VSync
+can be used to select the polarity of the VSync signal.
+.B Composite
+can be used to specify composite sync on hardware where this is supported.
+Additionally, on some hardware,
+.B +CSync
+and
+.B \-CSync
+may be used to select the composite sync polarity.
+The
+.B HSkew
+and
+.B VScan
+options mentioned above in the
+.B Modes
+entry description can also be used here.
+.RE
+.TP 7
+.BI "Option " "\*qDPMS\*q  " \*qbool\*q
+This option controls whether the server should enable the DPMS extension
+for power management for this screen.  The default is to enable the
+extension.
+.TP 7
+.BI "Option " "\*qSyncOnGreen\*q  " \*qbool\*q
+This option controls whether the video card should drive the sync signal
+on the green color pin.  Not all cards support this option, and most
+monitors do not require it.  The default is off.
+.TP 7
+.BI "Option " "\*qPrimary\*q  " \*qbool\*q
+This optional entry specifies that the monitor should be treated as the primary
+monitor. (RandR 1.2-supporting drivers only)
+.TP 7
+.BI "Option " "\*qPreferredMode\*q  " \*qstring\*q
+This optional entry specifies a mode to be marked as the preferred initial mode
+of the monitor.
+(RandR 1.2-supporting drivers only)
+.TP 7
+.BI "Option " "\*qPosition\*q  " "\*qx y\*q"
+This optional entry specifies the position of the monitor within the X
+screen.
+(RandR 1.2-supporting drivers only)
+.TP 7
+.BI "Option " "\*qLeftOf\*q  " \*qoutput\*q
+This optional entry specifies that the monitor should be positioned to the
+left of the output (not monitor) of the given name.
+(RandR 1.2-supporting drivers only)
+.TP 7
+.BI "Option " "\*qRightOf\*q  " \*qoutput\*q
+This optional entry specifies that the monitor should be positioned to the
+right of the output (not monitor) of the given name.
+(RandR 1.2-supporting drivers only)
+.TP 7
+.BI "Option " "\*qAbove\*q  " \*qoutput\*q
+This optional entry specifies that the monitor should be positioned above the
+output (not monitor) of the given name.
+(RandR 1.2-supporting drivers only)
+.TP 7
+.BI "Option " "\*qBelow\*q  " \*qoutput\*q
+This optional entry specifies that the monitor should be positioned below the
+output (not monitor) of the given name.
+(RandR 1.2-supporting drivers only)
+.TP 7
+.BI "Option " "\*qEnable\*q  " \*qbool\*q
+This optional entry specifies whether the monitor should be turned on
+at startup.  By default, the server will attempt to enable all connected
+monitors.
+(RandR 1.2-supporting drivers only)
+.TP 7
+.BI "Option " "\*qDefaultModes\*q  " \*qbool\*q
+This optional entry specifies whether the server should add supported default
+modes to the list of modes offered on this monitor. By default, the server
+will add default modes; you should only disable this if you can guarantee
+that EDID will be available at all times, or if you have added custom modelines
+which the server can use.
+(RandR 1.2-supporting drivers only)
+.TP 7
+.BI "Option " "\*qMinClock\*q  " \*qfrequency\*q
+This optional entry specifies the minimum dot clock, in kHz, that is supported
+by the monitor.
+.TP 7
+.BI "Option " "\*qMaxClock\*q  " \*qfrequency\*q
+This optional entry specifies the maximum dot clock, in kHz, that is supported
+by the monitor.
+.TP 7
+.BI "Option " "\*qIgnore\*q  " \*qbool\*q
+This optional entry specifies that the monitor should be ignored entirely,
+and not reported through RandR.  This is useful if the hardware reports the
+presence of outputs that don't exist.
+(RandR 1.2-supporting drivers only)
+.TP 7
+.BI "Option " "\*qRotate\*q  " \*qrotation\*q
+This optional entry specifies the initial rotation of the given monitor.
+Valid values for rotation are \*qnormal\*q, \*qleft\*q, \*qright\*q, and
+\*qinverted\*q.
+(RandR 1.2-supporting drivers only)
+
+.SH "MODES SECTION"
+The config file may have multiple
+.B Modes
+sections, or none.
+These sections provide a way of defining sets of video modes independently
+of the
+.B Monitor
+sections.
+.B Monitor
+sections may include the definitions provided in these sections by
+using the
+.B UseModes
+keyword.
+In most cases the
+.B Modes
+sections are not necessary because the built\-in set of VESA standard modes
+will be sufficient.
+.PP
+.B Modes
+sections have the following format:
+.PP
+.RS 4
+.nf
+.B  "Section \*qModes\*q"
+.BI "    Identifier \*q" name \*q
+.I  "    entries"
+.I  "    ..."
+.B  "EndSection"
+.fi
+.RE
+.PP
+The
+.B Identifier
+entry specifies the unique name for this set of mode descriptions.
+The other entries permitted in
+.B Modes
+sections are the
+.B Mode
+and
+.B ModeLine
+entries that are described above in the
+.B Monitor
+section.
+.SH "SCREEN SECTION"
+The config file may have multiple
+.B Screen
+sections.
+There must be at least one, for the \(lqscreen\(rq being used.
+A \(lqscreen\(rq represents the binding of a graphics device
+.RB ( Device
+section) and a monitor
+.RB ( Monitor
+section).
+A
+.B Screen
+section is considered \(lqactive\(rq if it is referenced by an active
+.B ServerLayout
+section or by the
+.B \-screen
+command line option.
+If neither of those is present, the first
+.B Screen
+section found in the config file is considered the active one.
+.PP
+.B Screen
+sections have the following format:
+.PP
+.RS 4
+.nf
+.B  "Section \*qScreen\*q"
+.BI "    Identifier \*q" name \*q
+.BI "    Device     \*q" devid \*q
+.BI "    Monitor    \*q" monid \*q
+.I  "    entries"
+.I  "    ..."
+.BI "    SubSection \*qDisplay\*q"
+.I  "       entries"
+.I  "       ...
+.B  "    EndSubSection"
+.I  "    ..."
+.B  "EndSection"
+.fi
+.RE
+.PP
+The
+.B Identifier
+and
+.B Device
+entries are mandatory.
+All others are optional.
+.PP
+The
+.B Identifier
+entry specifies the unique name for this screen.
+The
+.B Screen
+section provides information specific to the whole screen, including
+screen\-specific
+.BR Options .
+In multi\-head configurations, there will be multiple active
+.B Screen
+sections, one for each head.
+The entries available
+for this section are:
+.TP 7
+.BI "Device  \*q" device\-id \*q
+This mandatory entry specifies the
+.B Device
+section to be used for this screen.
+This is what ties a specific graphics card to a screen.
+The
+.I device\-id
+must match the
+.B Identifier
+of a
+.B Device
+section in the config file.
+.TP 7
+.BI "Monitor  \*q" monitor\-id \*q
+specifies which monitor description is to be used for this screen.
+If a
+.B Monitor
+name is not specified, a default configuration is used.
+Currently the default configuration may not function as expected on all
+platforms.
+.TP 7
+.BI "VideoAdaptor  \*q" xv\-id \*q
+specifies an optional Xv video adaptor description to be used with this
+screen.
+.TP 7
+.BI "DefaultDepth  " depth
+specifies which color depth the server should use by default.
+The
+.B \-depth
+command line option can be used to override this.
+If neither is specified, the default depth is driver\-specific, but in most
+cases is 8.
+.TP 7
+.BI "DefaultFbBpp  " bpp
+specifies which framebuffer layout to use by default.
+The
+.B \-fbbpp
+command line option can be used to override this.
+In most cases the driver will chose the best default value for this.
+The only case where there is even a choice in this value is for depth 24,
+where some hardware supports both a packed 24 bit framebuffer layout and a
+sparse 32 bit framebuffer layout.
+.TP 7
+.B Options
+Various
+.B Option
+flags may be specified in the
+.B Screen
+section.
+Some are driver\-specific and are described in the driver documentation.
+Others are driver\-independent, and will eventually be described here.
+.\" XXX These should really be in an xaa man page.
+.TP 7
+.BI "Option \*qAccel\*q"
+Enables XAA (X Acceleration Architecture), a mechanism that makes video cards'
+2D hardware acceleration available to the  __xservername__ server.
+This option is on by default, but it may be necessary to turn it off if
+there are bugs in the driver.
+There are many options to disable specific accelerated operations, listed
+below.
+Note that disabling an operation will have no effect if the operation is
+not accelerated (whether due to lack of support in the hardware or in the
+driver).
+.TP 7
+.BI "Option \*qInitPrimary\*q \*q" boolean \*q
+Use the Int10 module to initialize the primary graphics card.
+Normally, only secondary cards are soft-booted using the Int10 module, as the
+primary card has already been initialized by the BIOS at boot time.
+Default: false.
+.TP 7
+.BI "Option \*qNoInt10\*q \*q" boolean \*q
+Disables the Int10 module, a module that uses the int10 call to the BIOS
+of the graphics card to initialize it.
+Default: false.
+.TP 7
+.BI "Option \*qNoMTRR\*q"
+Disables MTRR (Memory Type Range Register) support, a feature of modern
+processors which can improve video performance by a factor of up to 2.5.
+Some hardware has buggy MTRR support, and some video drivers have been
+known to exhibit problems when MTRR's are used.
+.TP 7
+.BI "Option \*qXaaNoCPUToScreenColorExpandFill\*q"
+Disables accelerated rectangular expansion blits from source patterns
+stored in system memory (using a memory\-mapped aperture).
+.TP 7
+.BI "Option \*qXaaNoColor8x8PatternFillRect\*q"
+Disables accelerated fills of a rectangular region with a full\-color
+pattern.
+.TP 7
+.BI "Option \*qXaaNoColor8x8PatternFillTrap\*q"
+Disables accelerated fills of a trapezoidal region with a full\-color
+pattern.
+.TP 7
+.BI "Option \*qXaaNoDashedBresenhamLine\*q"
+Disables accelerated dashed Bresenham line draws.
+.TP 7
+.BI "Option \*qXaaNoDashedTwoPointLine\*q"
+Disables accelerated dashed line draws between two arbitrary points.
+.TP 7
+.BI "Option \*qXaaNoImageWriteRect\*q"
+Disables accelerated transfers of full\-color rectangular patterns from
+system memory to video memory (using a memory\-mapped aperture).
+.TP 7
+.BI "Option \*qXaaNoMono8x8PatternFillRect\*q"
+Disables accelerated fills of a rectangular region with a monochrome
+pattern.
+.TP 7
+.BI "Option \*qXaaNoMono8x8PatternFillTrap\*q"
+Disables accelerated fills of a trapezoidal region with a monochrome
+pattern.
+.TP 7
+.BI "Option \*qXaaNoOffscreenPixmaps\*q"
+Disables accelerated draws into pixmaps stored in offscreen video memory.
+.TP 7
+.BI "Option \*qXaaNoPixmapCache\*q"
+Disables caching of patterns in offscreen video memory.
+.TP 7
+.BI "Option \*qXaaNoScanlineCPUToScreenColorExpandFill\*q"
+Disables accelerated rectangular expansion blits from source patterns
+stored in system memory (one scan line at a time).
+.TP 7
+.BI "Option \*qXaaNoScanlineImageWriteRect\*q"
+Disables accelerated transfers of full\-color rectangular patterns from
+system memory to video memory (one scan line at a time).
+.TP 7
+.BI "Option \*qXaaNoScreenToScreenColorExpandFill\*q"
+Disables accelerated rectangular expansion blits from source patterns
+stored in offscreen video memory.
+.TP 7
+.BI "Option \*qXaaNoScreenToScreenCopy\*q"
+Disables accelerated copies of rectangular regions from one part of
+video memory to another part of video memory.
+.TP 7
+.BI "Option \*qXaaNoSolidBresenhamLine\*q"
+Disables accelerated solid Bresenham line draws.
+.TP 7
+.BI "Option \*qXaaNoSolidFillRect\*q"
+Disables accelerated solid\-color fills of rectangles.
+.TP 7
+.BI "Option \*qXaaNoSolidFillTrap\*q"
+Disables accelerated solid\-color fills of Bresenham trapezoids.
+.TP 7
+.BI "Option \*qXaaNoSolidHorVertLine\*q"
+Disables accelerated solid horizontal and vertical line draws.
+.TP 7
+.BI "Option \*qXaaNoSolidTwoPointLine\*q"
+Disables accelerated solid line draws between two arbitrary points.
+.PP
+Each
+.B Screen
+section may optionally contain one or more
+.B Display
+subsections.
+Those subsections provide depth/fbbpp specific configuration information,
+and the one chosen depends on the depth and/or fbbpp that is being used for
+the screen.
+The
+.B Display
+subsection format is described in the section below.
+
+.SH "DISPLAY SUBSECTION"
+Each
+.B Screen
+section may have multiple
+.B Display
+subsections.
+The \(lqactive\(rq
+.B Display
+subsection is the first that matches the depth and/or fbbpp values being
+used, or failing that, the first that has neither a depth or fbbpp value
+specified.
+The
+.B Display
+subsections are optional.
+When there isn't one that matches the depth and/or fbbpp values being used,
+all the parameters that can be specified here fall back to their defaults.
+.PP
+.B Display
+subsections have the following format:
+.PP
+.RS 4
+.nf
+.B  "    SubSection \*qDisplay\*q"
+.BI "        Depth  " depth
+.I  "        entries"
+.I  "        ..."
+.B  "    EndSubSection"
+.fi
+.RE
+.TP 7
+.BI "Depth  " depth
+This entry specifies what colour depth the
+.B Display
+subsection is to be used for.
+This entry is usually specified, but it may be omitted to create a match\-all
+.B Display
+subsection or when wishing to match only against the
+.B FbBpp
+parameter.
+The range of
+.I depth
+values that are allowed depends on the driver.
+Most drivers support 8, 15, 16 and 24.
+Some also support 1 and/or 4, and some may support other values (like 30).
+Note:
+.I depth
+means the number of bits in a pixel that are actually used to determine
+the pixel colour.
+32 is not a valid
+.I depth
+value.
+Most hardware that uses 32 bits per pixel only uses 24 of them to hold the
+colour information, which means that the colour depth is 24, not 32.
+.TP 7
+.BI "FbBpp  " bpp
+This entry specifies the framebuffer format this
+.B Display
+subsection is to be used for.
+This entry is only needed when providing depth 24 configurations that allow
+a choice between a 24 bpp packed framebuffer format and a 32bpp sparse
+framebuffer format.
+In most cases this entry should not be used.
+.TP 7
+.BI "Weight  " "red\-weight green\-weight blue\-weight"
+This optional entry specifies the relative RGB weighting to be used
+for a screen is being used at depth 16 for drivers that allow multiple
+formats.
+This may also be specified from the command line with the
+.B \-weight
+option (see
+.BR __xservername__(__appmansuffix__)).
+.TP 7
+.BI "Virtual  " "xdim ydim"
+This optional entry specifies the virtual screen resolution to be used.
+.I xdim
+must be a multiple of either 8 or 16 for most drivers, and a multiple
+of 32 when running in monochrome mode.
+The given value will be rounded down if this is not the case.
+Video modes which are too large for the specified virtual size will be
+rejected.
+If this entry is not present, the virtual screen resolution will be set to
+accommodate all the valid video modes given in the
+.B Modes
+entry.
+Some drivers/hardware combinations do not support virtual screens.
+Refer to the appropriate driver\-specific documentation for details.
+.TP 7
+.BI "ViewPort  " "x0 y0"
+This optional entry sets the upper left corner of the initial display.
+This is only relevant when the virtual screen resolution is different
+from the resolution of the initial video mode.
+If this entry is not given, then the initial display will be centered in
+the virtual display area.
+.TP 7
+.BI "Modes  \*q" mode\-name \*q " ..."
+This optional entry specifies the list of video modes to use.
+Each
+.I mode\-name
+specified must be in double quotes.
+They must correspond to those specified or referenced in the appropriate
+.B Monitor
+section (including implicitly referenced built\-in VESA standard modes).
+The server will delete modes from this list which don't satisfy various
+requirements.
+The first valid mode in this list will be the default display mode for
+startup.
+The list of valid modes is converted internally into a circular list.
+It is possible to switch to the next mode with
+.B Ctrl+Alt+Keypad\-Plus
+and to the previous mode with
+.BR Ctrl+Alt+Keypad\-Minus .
+When this entry is omitted, the valid modes referenced by the appropriate
+.B Monitor
+section will be used.  If the
+.B Monitor
+section contains no modes, then the selection will be taken from the
+built-in VESA standard modes.
+.TP 7
+.BI "Visual  \*q" visual\-name \*q
+This optional entry sets the default root visual type.
+This may also be specified from the command line (see the
+.BR Xserver(__appmansuffix__)
+man page).
+The visual types available for depth 8 are (default is
+.BR PseudoColor ):
+.PP
+.RS 11
+.nf
+.B StaticGray
+.B GrayScale
+.B StaticColor
+.B PseudoColor
+.B TrueColor
+.B DirectColor
+.fi
+.RE
+.PP
+.RS 7
+The visual type available for the depths 15, 16 and 24 are (default is
+.BR TrueColor ):
+.PP
+.RS 4
+.nf
+.B TrueColor
+.B DirectColor
+.fi
+.RE
+.PP
+Not all drivers support
+.B DirectColor
+at these depths.
+.PP
+The visual types available for the depth 4 are (default is
+.BR StaticColor ):
+.PP
+.RS 4
+.nf
+.B StaticGray
+.B GrayScale
+.B StaticColor
+.B PseudoColor
+.fi
+.RE
+.PP
+The visual type available for the depth 1 (monochrome) is
+.BR StaticGray .
+.RE
+.TP 7
+.BI "Black  " "red green blue"
+This optional entry allows the \(lqblack\(rq colour to be specified.
+This is only supported at depth 1.
+The default is black.
+.TP 7
+.BI "White  " "red green blue"
+This optional entry allows the \(lqwhite\(rq colour to be specified.
+This is only supported at depth 1.
+The default is white.
+.TP 7
+.B Options
+Option flags may be specified in the
+.B Display
+subsections.
+These may include driver\-specific options and driver\-independent options.
+The former are described in the driver\-specific documentation.
+Some of the latter are described above in the section about the
+.B Screen
+section, and they may also be included here.
+.SH "SERVERLAYOUT SECTION"
+The config file may have multiple
+.B ServerLayout
+sections.
+A \(lqserver layout\(rq represents the binding of one or more screens
+.RB ( Screen
+sections) and one or more input devices
+.RB ( InputDevice
+sections) to form a complete configuration.
+In multi\-head configurations, it also specifies the relative layout of the
+heads.
+A
+.B ServerLayout
+section is considered \(lqactive\(rq if it is referenced by the
+.B \-layout
+command line option or by an
+.B "Option \*qDefaultServerLayout\*q"
+entry in the
+.B ServerFlags
+section (the former takes precedence over the latter).
+If those options are not used, the first
+.B ServerLayout
+section found in the config file is considered the active one.
+If no
+.B ServerLayout
+sections are present, the single active screen and two active (core)
+input devices are selected as described in the relevant sections above.
+.PP
+.B ServerLayout
+sections have the following format:
+.PP
+.RS 4
+.nf
+.B  "Section \*qServerLayout\*q"
+.BI "    Identifier   \*q" name \*q
+.BI "    Screen       \*q" screen\-id \*q
+.I  "    ..."
+.BI "    InputDevice  \*q" idev\-id \*q
+.I  "    ..."
+.I  "    options"
+.I  "    ..."
+.B  "EndSection"
+.fi
+.RE
+.PP
+Each
+.B ServerLayout
+section must have an
+.B Identifier
+entry and at least one
+.B Screen
+entry.
+.PP
+The
+.B Identifier
+entry specifies the unique name for this server layout.
+The
+.B ServerLayout
+section provides information specific to the whole session, including
+session\-specific
+.BR Options .
+The
+.B ServerFlags
+options (described above) may be specified here, and ones given here
+override those given in the
+.B ServerFlags
+section.
+.PP
+The entries that may be used in this section are described here.
+.TP 7
+.BI "Screen  " "screen\-num" " \*qscreen\-id\*q " "position\-information"
+One of these entries must be given for each screen being used in
+a session.
+The
+.I screen\-id
+field is mandatory, and specifies the
+.B Screen
+section being referenced.
+The
+.I screen\-num
+field is optional, and may be used to specify the screen number
+in multi\-head configurations.
+When this field is omitted, the screens will be numbered in the order that
+they are listed in.
+The numbering starts from 0, and must be consecutive.
+The
+.I position\-information
+field describes the way multiple screens are positioned.
+There are a number of different ways that this information can be provided:
+.RS 7
+.TP 4
+.I  "x y"
+.TP 4
+.BI "Absolute  " "x y"
+These both specify that the upper left corner's coordinates are
+.RI ( x , y ).
+The
+.B Absolute
+keyword is optional.
+Some older versions of XFree86 (4.2 and earlier) don't recognise the
+.B Absolute
+keyword, so it's safest to just specify the coordinates without it.
+.TP 4
+.BI "RightOf   \*q" screen\-id \*q
+.TP 4
+.BI "LeftOf    \*q" screen\-id \*q
+.TP 4
+.BI "Above     \*q" screen\-id \*q
+.TP 4
+.BI "Below     \*q" screen\-id \*q
+.TP 4
+.BI "Relative  \*q" screen\-id \*q " x y"
+These give the screen's location relative to another screen.
+The first four position the screen immediately to the right, left, above or
+below the other screen.
+When positioning to the right or left, the top edges are aligned.
+When positioning above or below, the left edges are aligned.
+The
+.B Relative
+form specifies the offset of the screen's origin (upper left corner)
+relative to the origin of another screen.
+.RE
+.TP 7
+.BI "InputDevice  \*q" idev\-id "\*q \*q" option \*q " ..."
+One of these entries should be given for each input device being used in
+a session.
+Normally at least two are required, one each for the core pointer and
+keyboard devices.
+If either of those is missing, suitable
+.B InputDevice
+entries are searched for using the method described above in the
+.B INPUTDEVICE
+section.  The
+.I idev\-id
+field is mandatory, and specifies the name of the
+.B InputDevice
+section being referenced.
+Multiple
+.I option
+fields may be specified, each in double quotes.
+The options permitted here are any that may also be given in the
+.B InputDevice
+sections.
+Normally only session\-specific input device options would be used here.
+The most commonly used options are:
+.PP
+.RS 11
+.nf
+.B \*qCorePointer\*q
+.B \*qCoreKeyboard\*q
+.B \*qSendCoreEvents\*q
+.fi
+.RE
+.PP
+.RS 7
+and the first two should normally be used to indicate the core pointer
+and core keyboard devices respectively.
+.RE
+.TP 7
+.B Options
+In addition to the following, any option permitted in the
+.B ServerFlags
+section may also be specified here.
+When the same option appears in both places, the value given here overrides
+the one given in the
+.B ServerFlags
+section.
+.TP 7
+.BI "Option \*qIsolateDevice\*q  \*q" bus\-id \*q
+Restrict device resets to the specified
+.IR bus\-id .
+See the
+.B BusID
+option (described in
+.BR "DEVICE SECTION" ,
+above) for the format of the
+.I bus\-id
+parameter.
+This option overrides
+.BR SingleCard ,
+if specified.
+At present, only PCI devices can be isolated in this manner.
+.TP 7
+.BI "Option \*qSingleCard\*q  \*q" boolean \*q
+As
+.BR IsolateDevice ,
+except that the bus ID of the first device in the layout is used.
+.PP
+Here is an example of a
+.B ServerLayout
+section for a dual headed configuration with two mice:
+.PP
+.RS 4
+.nf
+.B "Section \*qServerLayout\*q"
+.B "    Identifier  \*qLayout 1\*q"
+.B "    Screen      \*qMGA 1\*q"
+.B "    Screen      \*qMGA 2\*q RightOf \*qMGA 1\*q"
+.B "    InputDevice \*qKeyboard 1\*q \*qCoreKeyboard\*q"
+.B "    InputDevice \*qMouse 1\*q    \*qCorePointer\*q"
+.B "    InputDevice \*qMouse 2\*q    \*qSendCoreEvents\*q"
+.B "    Option      \*qBlankTime\*q  \*q5\*q"
+.B "EndSection"
+.fi
+.RE
+.SH "DRI SECTION"
+This optional section is used to provide some information for the
+Direct Rendering Infrastructure.
+Details about the format of this section can be found on-line at
+.IR <http://dri.freedesktop.org/> .
+.SH "VENDOR SECTION"
+The optional
+.B Vendor
+section may be used to provide vendor\-specific configuration information.
+Multiple
+.B Vendor
+sections may be present, and they may contain an
+.B Identifier
+entry and multiple
+.B Option
+flags.
+The data therein is not used in this release.
+.PP
+.SH "SEE ALSO"
+General:
+.BR X (__miscmansuffix__),
+.BR Xserver (__appmansuffix__),
+.BR __xservername__ (__appmansuffix__),
+.BR cvt (__appmansuffix__),
+.BR gtf (__appmansuffix__).
+.PP
+.B "Not all modules or interfaces are available on all platforms."
+.PP
+Display drivers:
+.BR apm (__drivermansuffix__),
+.BR ati (__drivermansuffix__),
+.BR chips (__drivermansuffix__),
+.BR cirrus (__drivermansuffix__),
+.BR cyrix (__drivermansuffix__),
+.BR fbdev (__drivermansuffix__),
+.BR glide (__drivermansuffix__),
+.BR glint (__drivermansuffix__),
+.BR i128 (__drivermansuffix__),
+.BR i740 (__drivermansuffix__),
+.BR imstt (__drivermansuffix__),
+.BR intel (__drivermansuffix__),
+.BR mga (__drivermansuffix__),
+.BR neomagic (__drivermansuffix__),
+.BR nv (__drivermansuffix__),
+.BR openchrome (__drivermansuffix__),
+.BR r128 (__drivermansuffix__),
+.BR radeon (__drivermansuffix__),
+.BR rendition (__drivermansuffix__),
+.BR savage (__drivermansuffix__),
+.BR s3virge (__drivermansuffix__),
+.BR siliconmotion (__drivermansuffix__),
+.BR sis (__drivermansuffix__),
+.BR sisusb (__drivermansuffix__),
+.BR sunbw2 (__drivermansuffix__),
+.BR suncg14 (__drivermansuffix__),
+.BR suncg3 (__drivermansuffix__),
+.BR suncg6 (__drivermansuffix__),
+.BR sunffb (__drivermansuffix__),
+.BR sunleo (__drivermansuffix__),
+.BR suntcx (__drivermansuffix__),
+.BR tdfx (__drivermansuffix__),
+.\" .BR tga (__drivermansuffix__),
+.BR trident (__drivermansuffix__),
+.BR tseng (__drivermansuffix__),
+.BR vesa (__drivermansuffix__),
+.BR vmware (__drivermansuffix__),
+.BR voodoo (__drivermansuffix__),
+.BR wsfb (__drivermansuffix__),
+.BR xgi (__drivermansuffix__),
+.BR xgixp (__drivermansuffix__).
+.PP
+Input drivers:
+.BR acecad (__drivermansuffix__),
+.BR citron (__drivermansuffix__),
+.BR elographics (__drivermansuffix__),
+.BR evdev (__drivermansuffix__),
+.BR fpit (__drivermansuffix__),
+.BR joystick (__drivermansuffix__),
+.BR kbd (__drivermansuffix__),
+.BR mousedrv (__drivermansuffix__),
+.BR mutouch (__drivermansuffix__),
+.BR penmount (__drivermansuffix__),
+.BR synaptics (__drivermansuffix__),
+.BR vmmouse (__drivermansuffix__),
+.BR void (__drivermansuffix__),
+.BR wacom (__drivermansuffix__).
+.PP
+Other modules and interfaces:
+.BR exa (__drivermansuffix__),
+.BR fbdevhw (__drivermansuffix__),
+.\" .BR shadowfb (__drivermansuffix__),
+.BR v4l (__drivermansuffix__).
+.br
+.SH AUTHORS
+This manual page was largely rewritten by David Dawes
+.IR <dawes@xfree86.org> .