diff options
Diffstat (limited to 'xorg-server/xkbdata.src/keymap/Makefile.in')
| -rw-r--r-- | xorg-server/xkbdata.src/keymap/Makefile.in | 561 |
1 files changed, 561 insertions, 0 deletions
diff --git a/xorg-server/xkbdata.src/keymap/Makefile.in b/xorg-server/xkbdata.src/keymap/Makefile.in new file mode 100644 index 000000000..dab44ddd0 --- /dev/null +++ b/xorg-server/xkbdata.src/keymap/Makefile.in @@ -0,0 +1,561 @@ +# Makefile.in generated by automake 1.9.6 from Makefile.am. +# @configure_input@ + +# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, +# 2003, 2004, 2005 Free Software Foundation, Inc. +# This Makefile.in is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY, to the extent permitted by law; without +# even the implied warranty of MERCHANTABILITY or FITNESS FOR A +# PARTICULAR PURPOSE. + +@SET_MAKE@ + +# Common rules for building *.dir files in all xkb subdirectories +# Replaces Imake's MakeXkbDir() rule +# svu: taken from xkbdata + +srcdir = @srcdir@ +top_srcdir = @top_srcdir@ +VPATH = @srcdir@ +pkgdatadir = $(datadir)/@PACKAGE@ +pkglibdir = $(libdir)/@PACKAGE@ +pkgincludedir = $(includedir)/@PACKAGE@ +top_builddir = .. +am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd +INSTALL = @INSTALL@ +install_sh_DATA = $(install_sh) -c -m 644 +install_sh_PROGRAM = $(install_sh) -c +install_sh_SCRIPT = $(install_sh) -c +INSTALL_HEADER = $(INSTALL_DATA) +transform = $(program_transform_name) +NORMAL_INSTALL = : +PRE_INSTALL = : +POST_INSTALL = : +NORMAL_UNINSTALL = : +PRE_UNINSTALL = : +POST_UNINSTALL = : +DIST_COMMON = README $(dist_dir_DATA) $(dist_keymap_DATA) \ + $(srcdir)/Makefile.am $(srcdir)/Makefile.in \ + $(top_srcdir)/xkbrules.am +subdir = keymap +ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 +am__aclocal_m4_deps = $(top_srcdir)/configure.in +am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ + $(ACLOCAL_M4) +mkinstalldirs = $(install_sh) -d +CONFIG_CLEAN_FILES = +SOURCES = +DIST_SOURCES = +RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \ + html-recursive info-recursive install-data-recursive \ + install-exec-recursive install-info-recursive \ + install-recursive installcheck-recursive installdirs-recursive \ + pdf-recursive ps-recursive uninstall-info-recursive \ + uninstall-recursive +am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; +am__vpath_adj = case $$p in \ + $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \ + *) f=$$p;; \ + esac; +am__strip_dir = `echo $$p | sed -e 's|^.*/||'`; +am__installdirs = "$(DESTDIR)$(dirdir)" "$(DESTDIR)$(keymapdir)" +dist_dirDATA_INSTALL = $(INSTALL_DATA) +dist_keymapDATA_INSTALL = $(INSTALL_DATA) +DATA = $(dist_dir_DATA) $(dist_keymap_DATA) +ETAGS = etags +CTAGS = ctags +DIST_SUBDIRS = $(SUBDIRS) +DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) +ACLOCAL = @ACLOCAL@ +ALL_LINGUAS = @ALL_LINGUAS@ +AMDEP_FALSE = @AMDEP_FALSE@ +AMDEP_TRUE = @AMDEP_TRUE@ +AMTAR = @AMTAR@ +AUTOCONF = @AUTOCONF@ +AUTOHEADER = @AUTOHEADER@ +AUTOMAKE = @AUTOMAKE@ +AWK = @AWK@ +CATALOGS = @CATALOGS@ +CATOBJEXT = @CATOBJEXT@ +CC = @CC@ +CCDEPMODE = @CCDEPMODE@ +CFLAGS = @CFLAGS@ +CPP = @CPP@ +CPPFLAGS = @CPPFLAGS@ +CREATE_RULES_SYMLINK_FALSE = @CREATE_RULES_SYMLINK_FALSE@ +CREATE_RULES_SYMLINK_TRUE = @CREATE_RULES_SYMLINK_TRUE@ +CREATE_XKBCOMP_SYMLINK_FALSE = @CREATE_XKBCOMP_SYMLINK_FALSE@ +CREATE_XKBCOMP_SYMLINK_TRUE = @CREATE_XKBCOMP_SYMLINK_TRUE@ +CYGPATH_W = @CYGPATH_W@ +DATADIRNAME = @DATADIRNAME@ +DEFS = @DEFS@ +DEPDIR = @DEPDIR@ +ECHO_C = @ECHO_C@ +ECHO_N = @ECHO_N@ +ECHO_T = @ECHO_T@ +EGREP = @EGREP@ +EXEEXT = @EXEEXT@ +GETTEXT_PACKAGE = @GETTEXT_PACKAGE@ +GMOFILES = @GMOFILES@ +GMSGFMT = @GMSGFMT@ +GREP = @GREP@ +INSTALL_DATA = @INSTALL_DATA@ +INSTALL_PROGRAM = @INSTALL_PROGRAM@ +INSTALL_SCRIPT = @INSTALL_SCRIPT@ +INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ +INSTOBJEXT = @INSTOBJEXT@ +INTLLIBS = @INTLLIBS@ +INTLTOOL_CAVES_RULE = @INTLTOOL_CAVES_RULE@ +INTLTOOL_DESKTOP_RULE = @INTLTOOL_DESKTOP_RULE@ +INTLTOOL_DIRECTORY_RULE = @INTLTOOL_DIRECTORY_RULE@ +INTLTOOL_EXTRACT = @INTLTOOL_EXTRACT@ +INTLTOOL_KBD_RULE = @INTLTOOL_KBD_RULE@ +INTLTOOL_KEYS_RULE = @INTLTOOL_KEYS_RULE@ +INTLTOOL_MERGE = @INTLTOOL_MERGE@ +INTLTOOL_OAF_RULE = @INTLTOOL_OAF_RULE@ +INTLTOOL_PERL = @INTLTOOL_PERL@ +INTLTOOL_POLICY_RULE = @INTLTOOL_POLICY_RULE@ +INTLTOOL_PONG_RULE = @INTLTOOL_PONG_RULE@ +INTLTOOL_PROP_RULE = @INTLTOOL_PROP_RULE@ +INTLTOOL_SCHEMAS_RULE = @INTLTOOL_SCHEMAS_RULE@ +INTLTOOL_SERVER_RULE = @INTLTOOL_SERVER_RULE@ +INTLTOOL_SERVICE_RULE = @INTLTOOL_SERVICE_RULE@ +INTLTOOL_SHEET_RULE = @INTLTOOL_SHEET_RULE@ +INTLTOOL_SOUNDLIST_RULE = @INTLTOOL_SOUNDLIST_RULE@ +INTLTOOL_THEME_RULE = @INTLTOOL_THEME_RULE@ +INTLTOOL_UI_RULE = @INTLTOOL_UI_RULE@ +INTLTOOL_UPDATE = @INTLTOOL_UPDATE@ +INTLTOOL_XAM_RULE = @INTLTOOL_XAM_RULE@ +INTLTOOL_XML_NOMERGE_RULE = @INTLTOOL_XML_NOMERGE_RULE@ +INTLTOOL_XML_RULE = @INTLTOOL_XML_RULE@ +LDFLAGS = @LDFLAGS@ +LIBOBJS = @LIBOBJS@ +LIBS = @LIBS@ +LTLIBOBJS = @LTLIBOBJS@ +MAINT = @MAINT@ +MAINTAINER_MODE_FALSE = @MAINTAINER_MODE_FALSE@ +MAINTAINER_MODE_TRUE = @MAINTAINER_MODE_TRUE@ +MAKEINFO = @MAKEINFO@ +MKINSTALLDIRS = @MKINSTALLDIRS@ +MSGFMT = @MSGFMT@ +MSGFMT_OPTS = @MSGFMT_OPTS@ +MSGMERGE = @MSGMERGE@ +OBJEXT = @OBJEXT@ +PACKAGE = @PACKAGE@ +PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ +PACKAGE_NAME = @PACKAGE_NAME@ +PACKAGE_STRING = @PACKAGE_STRING@ +PACKAGE_TARNAME = @PACKAGE_TARNAME@ +PACKAGE_VERSION = @PACKAGE_VERSION@ +PATH_SEPARATOR = @PATH_SEPARATOR@ +POFILES = @POFILES@ +POSUB = @POSUB@ +PO_IN_DATADIR_FALSE = @PO_IN_DATADIR_FALSE@ +PO_IN_DATADIR_TRUE = @PO_IN_DATADIR_TRUE@ +SET_MAKE = @SET_MAKE@ +SHELL = @SHELL@ +STRIP = @STRIP@ +USE_COMPAT_RULES_FALSE = @USE_COMPAT_RULES_FALSE@ +USE_COMPAT_RULES_TRUE = @USE_COMPAT_RULES_TRUE@ +USE_NLS = @USE_NLS@ +VERSION = @VERSION@ +XGETTEXT = @XGETTEXT@ +XKBCOMP = @XKBCOMP@ +ac_ct_CC = @ac_ct_CC@ +am__fastdepCC_FALSE = @am__fastdepCC_FALSE@ +am__fastdepCC_TRUE = @am__fastdepCC_TRUE@ +am__include = @am__include@ +am__leading_dot = @am__leading_dot@ +am__quote = @am__quote@ +am__tar = @am__tar@ +am__untar = @am__untar@ +bindir = @bindir@ +build_alias = @build_alias@ +datadir = @datadir@ +datarootdir = @datarootdir@ +docdir = @docdir@ +dvidir = @dvidir@ +exec_prefix = @exec_prefix@ +host_alias = @host_alias@ +htmldir = @htmldir@ +includedir = @includedir@ +infodir = @infodir@ +install_sh = @install_sh@ +libdir = @libdir@ +libexecdir = @libexecdir@ +localedir = @localedir@ +localstatedir = @localstatedir@ +mandir = @mandir@ +mkdir_p = @mkdir_p@ +oldincludedir = @oldincludedir@ +pdfdir = @pdfdir@ +prefix = @prefix@ +program_transform_name = @program_transform_name@ +psdir = @psdir@ +sbindir = @sbindir@ +sharedstatedir = @sharedstatedir@ +sysconfdir = @sysconfdir@ +target_alias = @target_alias@ +xkb_base = @xkb_base@ +xkb_rules_symlink = @xkb_rules_symlink@ +SUBDIRS = digital_vndr sgi_vndr sun_vndr +keymapdir = $(xkb_base)/keymap +dist_keymap_DATA = \ +amiga ataritt macintosh \ +sony xfree86 xfree98 \ +README + +dir_data = $(dist_keymap_DATA) +dist_dir_DATA = $(subdir).dir +dirdir = $(xkb_base) +CLEANFILES = $(subdir).dir +all: all-recursive + +.SUFFIXES: +$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(top_srcdir)/xkbrules.am $(am__configure_deps) + @for dep in $?; do \ + case '$(am__configure_deps)' in \ + *$$dep*) \ + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh \ + && exit 0; \ + exit 1;; \ + esac; \ + done; \ + echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu keymap/Makefile'; \ + cd $(top_srcdir) && \ + $(AUTOMAKE) --gnu keymap/Makefile +.PRECIOUS: Makefile +Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status + @case '$?' in \ + *config.status*) \ + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \ + *) \ + echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \ + cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \ + esac; + +$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh + +$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps) + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh +$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps) + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh +uninstall-info-am: +install-dist_dirDATA: $(dist_dir_DATA) + @$(NORMAL_INSTALL) + test -z "$(dirdir)" || $(mkdir_p) "$(DESTDIR)$(dirdir)" + @list='$(dist_dir_DATA)'; for p in $$list; do \ + if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ + f=$(am__strip_dir) \ + echo " $(dist_dirDATA_INSTALL) '$$d$$p' '$(DESTDIR)$(dirdir)/$$f'"; \ + $(dist_dirDATA_INSTALL) "$$d$$p" "$(DESTDIR)$(dirdir)/$$f"; \ + done + +uninstall-dist_dirDATA: + @$(NORMAL_UNINSTALL) + @list='$(dist_dir_DATA)'; for p in $$list; do \ + f=$(am__strip_dir) \ + echo " rm -f '$(DESTDIR)$(dirdir)/$$f'"; \ + rm -f "$(DESTDIR)$(dirdir)/$$f"; \ + done +install-dist_keymapDATA: $(dist_keymap_DATA) + @$(NORMAL_INSTALL) + test -z "$(keymapdir)" || $(mkdir_p) "$(DESTDIR)$(keymapdir)" + @list='$(dist_keymap_DATA)'; for p in $$list; do \ + if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ + f=$(am__strip_dir) \ + echo " $(dist_keymapDATA_INSTALL) '$$d$$p' '$(DESTDIR)$(keymapdir)/$$f'"; \ + $(dist_keymapDATA_INSTALL) "$$d$$p" "$(DESTDIR)$(keymapdir)/$$f"; \ + done + +uninstall-dist_keymapDATA: + @$(NORMAL_UNINSTALL) + @list='$(dist_keymap_DATA)'; for p in $$list; do \ + f=$(am__strip_dir) \ + echo " rm -f '$(DESTDIR)$(keymapdir)/$$f'"; \ + rm -f "$(DESTDIR)$(keymapdir)/$$f"; \ + done + +# This directory's subdirectories are mostly independent; you can cd +# into them and run `make' without going through this Makefile. +# To change the values of `make' variables: instead of editing Makefiles, +# (1) if the variable is set in `config.status', edit `config.status' +# (which will cause the Makefiles to be regenerated when you run `make'); +# (2) otherwise, pass the desired values on the `make' command line. +$(RECURSIVE_TARGETS): + @failcom='exit 1'; \ + for f in x $$MAKEFLAGS; do \ + case $$f in \ + *=* | --[!k]*);; \ + *k*) failcom='fail=yes';; \ + esac; \ + done; \ + dot_seen=no; \ + target=`echo $@ | sed s/-recursive//`; \ + list='$(SUBDIRS)'; for subdir in $$list; do \ + echo "Making $$target in $$subdir"; \ + if test "$$subdir" = "."; then \ + dot_seen=yes; \ + local_target="$$target-am"; \ + else \ + local_target="$$target"; \ + fi; \ + (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ + || eval $$failcom; \ + done; \ + if test "$$dot_seen" = "no"; then \ + $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \ + fi; test -z "$$fail" + +mostlyclean-recursive clean-recursive distclean-recursive \ +maintainer-clean-recursive: + @failcom='exit 1'; \ + for f in x $$MAKEFLAGS; do \ + case $$f in \ + *=* | --[!k]*);; \ + *k*) failcom='fail=yes';; \ + esac; \ + done; \ + dot_seen=no; \ + case "$@" in \ + distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \ + *) list='$(SUBDIRS)' ;; \ + esac; \ + rev=''; for subdir in $$list; do \ + if test "$$subdir" = "."; then :; else \ + rev="$$subdir $$rev"; \ + fi; \ + done; \ + rev="$$rev ."; \ + target=`echo $@ | sed s/-recursive//`; \ + for subdir in $$rev; do \ + echo "Making $$target in $$subdir"; \ + if test "$$subdir" = "."; then \ + local_target="$$target-am"; \ + else \ + local_target="$$target"; \ + fi; \ + (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ + || eval $$failcom; \ + done && test -z "$$fail" +tags-recursive: + list='$(SUBDIRS)'; for subdir in $$list; do \ + test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \ + done +ctags-recursive: + list='$(SUBDIRS)'; for subdir in $$list; do \ + test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \ + done + +ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES) + list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ + unique=`for i in $$list; do \ + if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ + done | \ + $(AWK) ' { files[$$0] = 1; } \ + END { for (i in files) print i; }'`; \ + mkid -fID $$unique +tags: TAGS + +TAGS: tags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ + $(TAGS_FILES) $(LISP) + tags=; \ + here=`pwd`; \ + if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \ + include_option=--etags-include; \ + empty_fix=.; \ + else \ + include_option=--include; \ + empty_fix=; \ + fi; \ + list='$(SUBDIRS)'; for subdir in $$list; do \ + if test "$$subdir" = .; then :; else \ + test ! -f $$subdir/TAGS || \ + tags="$$tags $$include_option=$$here/$$subdir/TAGS"; \ + fi; \ + done; \ + list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ + unique=`for i in $$list; do \ + if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ + done | \ + $(AWK) ' { files[$$0] = 1; } \ + END { for (i in files) print i; }'`; \ + if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \ + test -n "$$unique" || unique=$$empty_fix; \ + $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ + $$tags $$unique; \ + fi +ctags: CTAGS +CTAGS: ctags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ + $(TAGS_FILES) $(LISP) + tags=; \ + here=`pwd`; \ + list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ + unique=`for i in $$list; do \ + if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ + done | \ + $(AWK) ' { files[$$0] = 1; } \ + END { for (i in files) print i; }'`; \ + test -z "$(CTAGS_ARGS)$$tags$$unique" \ + || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \ + $$tags $$unique + +GTAGS: + here=`$(am__cd) $(top_builddir) && pwd` \ + && cd $(top_srcdir) \ + && gtags -i $(GTAGS_ARGS) $$here + +distclean-tags: + -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags + +distdir: $(DISTFILES) + $(mkdir_p) $(distdir)/.. + @srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \ + topsrcdirstrip=`echo "$(top_srcdir)" | sed 's|.|.|g'`; \ + list='$(DISTFILES)'; for file in $$list; do \ + case $$file in \ + $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \ + $(top_srcdir)/*) file=`echo "$$file" | sed "s|^$$topsrcdirstrip/|$(top_builddir)/|"`;; \ + esac; \ + if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ + dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \ + if test "$$dir" != "$$file" && test "$$dir" != "."; then \ + dir="/$$dir"; \ + $(mkdir_p) "$(distdir)$$dir"; \ + else \ + dir=''; \ + fi; \ + if test -d $$d/$$file; then \ + if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ + cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \ + fi; \ + cp -pR $$d/$$file $(distdir)$$dir || exit 1; \ + else \ + test -f $(distdir)/$$file \ + || cp -p $$d/$$file $(distdir)/$$file \ + || exit 1; \ + fi; \ + done + list='$(DIST_SUBDIRS)'; for subdir in $$list; do \ + if test "$$subdir" = .; then :; else \ + test -d "$(distdir)/$$subdir" \ + || $(mkdir_p) "$(distdir)/$$subdir" \ + || exit 1; \ + distdir=`$(am__cd) $(distdir) && pwd`; \ + top_distdir=`$(am__cd) $(top_distdir) && pwd`; \ + (cd $$subdir && \ + $(MAKE) $(AM_MAKEFLAGS) \ + top_distdir="$$top_distdir" \ + distdir="$$distdir/$$subdir" \ + distdir) \ + || exit 1; \ + fi; \ + done +check-am: all-am +check: check-recursive +all-am: Makefile $(DATA) +installdirs: installdirs-recursive +installdirs-am: + for dir in "$(DESTDIR)$(dirdir)" "$(DESTDIR)$(keymapdir)"; do \ + test -z "$$dir" || $(mkdir_p) "$$dir"; \ + done +install: install-recursive +install-exec: install-exec-recursive +install-data: install-data-recursive +uninstall: uninstall-recursive + +install-am: all-am + @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am + +installcheck: installcheck-recursive +install-strip: + $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ + install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ + `test -z '$(STRIP)' || \ + echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install +mostlyclean-generic: + +clean-generic: + -test -z "$(CLEANFILES)" || rm -f $(CLEANFILES) + +distclean-generic: + -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) + +maintainer-clean-generic: + @echo "This command is intended for maintainers to use" + @echo "it deletes files that may require special tools to rebuild." +clean: clean-recursive + +clean-am: clean-generic mostlyclean-am + +distclean: distclean-recursive + -rm -f Makefile +distclean-am: clean-am distclean-generic distclean-tags + +dvi: dvi-recursive + +dvi-am: + +html: html-recursive + +info: info-recursive + +info-am: + +install-data-am: install-dist_dirDATA install-dist_keymapDATA + +install-exec-am: + +install-info: install-info-recursive + +install-man: + +installcheck-am: + +maintainer-clean: maintainer-clean-recursive + -rm -f Makefile +maintainer-clean-am: distclean-am maintainer-clean-generic + +mostlyclean: mostlyclean-recursive + +mostlyclean-am: mostlyclean-generic + +pdf: pdf-recursive + +pdf-am: + +ps: ps-recursive + +ps-am: + +uninstall-am: uninstall-dist_dirDATA uninstall-dist_keymapDATA \ + uninstall-info-am + +uninstall-info: uninstall-info-recursive + +.PHONY: $(RECURSIVE_TARGETS) CTAGS GTAGS all all-am check check-am \ + clean clean-generic clean-recursive ctags ctags-recursive \ + distclean distclean-generic distclean-recursive distclean-tags \ + distdir dvi dvi-am html html-am info info-am install \ + install-am install-data install-data-am install-dist_dirDATA \ + install-dist_keymapDATA install-exec install-exec-am \ + install-info install-info-am install-man install-strip \ + installcheck installcheck-am installdirs installdirs-am \ + maintainer-clean maintainer-clean-generic \ + maintainer-clean-recursive mostlyclean mostlyclean-generic \ + mostlyclean-recursive pdf pdf-am ps ps-am tags tags-recursive \ + uninstall uninstall-am uninstall-dist_dirDATA \ + uninstall-dist_keymapDATA uninstall-info-am + + +$(subdir).dir: $(dir_data) + -rm -f $@ + here=$$(pwd); cd $(srcdir) && $(XKBCOMP) -lfhlpR -o $${here}/$@ '*' +# Tell versions [3.59,3.63) of GNU make to not export all variables. +# Otherwise a system limit (for SysV at least) may be exceeded. +.NOEXPORT: |