4 files changed, 737 insertions, 0 deletions
diff --git a/zlib/contrib/delphi/ZLib.pas b/zlib/contrib/delphi/ZLib.pas
new file mode 100644
index 000000000..3f2b8b4a5
--- /dev/null
+++ b/zlib/contrib/delphi/ZLib.pas
@@ -0,0 +1,557 @@
+{*******************************************************}
+{                                                       }
+{       Borland Delphi Supplemental Components          }
+{       ZLIB Data Compression Interface Unit            }
+{                                                       }
+{       Copyright (c) 1997,99 Borland Corporation       }
+{                                                       }
+{*******************************************************}
+
+{ Updated for zlib 1.2.x by Cosmin Truta <cosmint@cs.ubbcluj.ro> }
+
+unit ZLib;
+
+interface
+
+uses SysUtils, Classes;
+
+type
+  TAlloc = function (AppData: Pointer; Items, Size: Integer): Pointer; cdecl;
+  TFree = procedure (AppData, Block: Pointer); cdecl;
+
+  // Internal structure.  Ignore.
+  TZStreamRec = packed record
+    next_in: PChar;       // next input byte
+    avail_in: Integer;    // number of bytes available at next_in
+    total_in: Longint;    // total nb of input bytes read so far
+
+    next_out: PChar;      // next output byte should be put here
+    avail_out: Integer;   // remaining free space at next_out
+    total_out: Longint;   // total nb of bytes output so far
+
+    msg: PChar;           // last error message, NULL if no error
+    internal: Pointer;    // not visible by applications
+
+    zalloc: TAlloc;       // used to allocate the internal state
+    zfree: TFree;         // used to free the internal state
+    AppData: Pointer;     // private data object passed to zalloc and zfree
+
+    data_type: Integer;   // best guess about the data type: ascii or binary
+    adler: Longint;       // adler32 value of the uncompressed data
+    reserved: Longint;    // reserved for future use
+  end;
+
+  // Abstract ancestor class
+  TCustomZlibStream = class(TStream)
+  private
+    FStrm: TStream;
+    FStrmPos: Integer;
+    FOnProgress: TNotifyEvent;
+    FZRec: TZStreamRec;
+    FBuffer: array [Word] of Char;
+  protected
+    procedure Progress(Sender: TObject); dynamic;
+    property OnProgress: TNotifyEvent read FOnProgress write FOnProgress;
+    constructor Create(Strm: TStream);
+  end;
+
+{ TCompressionStream compresses data on the fly as data is written to it, and
+  stores the compressed data to another stream.
+
+  TCompressionStream is write-only and strictly sequential. Reading from the
+  stream will raise an exception. Using Seek to move the stream pointer
+  will raise an exception.
+
+  Output data is cached internally, written to the output stream only when
+  the internal output buffer is full.  All pending output data is flushed
+  when the stream is destroyed.
+
+  The Position property returns the number of uncompressed bytes of
+  data that have been written to the stream so far.
+
+  CompressionRate returns the on-the-fly percentage by which the original
+  data has been compressed:  (1 - (CompressedBytes / UncompressedBytes)) * 100
+  If raw data size = 100 and compressed data size = 25, the CompressionRate
+  is 75%
+
+  The OnProgress event is called each time the output buffer is filled and
+  written to the output stream.  This is useful for updating a progress
+  indicator when you are writing a large chunk of data to the compression
+  stream in a single call.}
+
+
+  TCompressionLevel = (clNone, clFastest, clDefault, clMax);
+
+  TCompressionStream = class(TCustomZlibStream)
+  private
+    function GetCompressionRate: Single;
+  public
+    constructor Create(CompressionLevel: TCompressionLevel; Dest: TStream);
+    destructor Destroy; override;
+    function Read(var Buffer; Count: Longint): Longint; override;
+    function Write(const Buffer; Count: Longint): Longint; override;
+    function Seek(Offset: Longint; Origin: Word): Longint; override;
+    property CompressionRate: Single read GetCompressionRate;
+    property OnProgress;
+  end;
+
+{ TDecompressionStream decompresses data on the fly as data is read from it.
+
+  Compressed data comes from a separate source stream.  TDecompressionStream
+  is read-only and unidirectional; you can seek forward in the stream, but not
+  backwards.  The special case of setting the stream position to zero is
+  allowed.  Seeking forward decompresses data until the requested position in
+  the uncompressed data has been reached.  Seeking backwards, seeking relative
+  to the end of the stream, requesting the size of the stream, and writing to
+  the stream will raise an exception.
+
+  The Position property returns the number of bytes of uncompressed data that
+  have been read from the stream so far.
+
+  The OnProgress event is called each time the internal input buffer of
+  compressed data is exhausted and the next block is read from the input stream.
+  This is useful for updating a progress indicator when you are reading a
+  large chunk of data from the decompression stream in a single call.}
+
+  TDecompressionStream = class(TCustomZlibStream)
+  public
+    constructor Create(Source: TStream);
+    destructor Destroy; override;
+    function Read(var Buffer; Count: Longint): Longint; override;
+    function Write(const Buffer; Count: Longint): Longint; override;
+    function Seek(Offset: Longint; Origin: Word): Longint; override;
+    property OnProgress;
+  end;
+
+
+
+{ CompressBuf compresses data, buffer to buffer, in one call.
+   In: InBuf = ptr to compressed data
+       InBytes = number of bytes in InBuf
+  Out: OutBuf = ptr to newly allocated buffer containing decompressed data
+       OutBytes = number of bytes in OutBuf   }
+procedure CompressBuf(const InBuf: Pointer; InBytes: Integer;
+                      out OutBuf: Pointer; out OutBytes: Integer);
+
+
+{ DecompressBuf decompresses data, buffer to buffer, in one call.
+   In: InBuf = ptr to compressed data
+       InBytes = number of bytes in InBuf
+       OutEstimate = zero, or est. size of the decompressed data
+  Out: OutBuf = ptr to newly allocated buffer containing decompressed data
+       OutBytes = number of bytes in OutBuf   }
+procedure DecompressBuf(const InBuf: Pointer; InBytes: Integer;
+ OutEstimate: Integer; out OutBuf: Pointer; out OutBytes: Integer);
+
+{ DecompressToUserBuf decompresses data, buffer to buffer, in one call.
+   In: InBuf = ptr to compressed data
+       InBytes = number of bytes in InBuf
+  Out: OutBuf = ptr to user-allocated buffer to contain decompressed data
+       BufSize = number of bytes in OutBuf   }
+procedure DecompressToUserBuf(const InBuf: Pointer; InBytes: Integer;
+  const OutBuf: Pointer; BufSize: Integer);
+
+const
+  zlib_version = '1.2.3';
+
+type
+  EZlibError = class(Exception);
+  ECompressionError = class(EZlibError);
+  EDecompressionError = class(EZlibError);
+
+implementation
+
+uses ZLibConst;
+
+const
+  Z_NO_FLUSH      = 0;
+  Z_PARTIAL_FLUSH = 1;
+  Z_SYNC_FLUSH    = 2;
+  Z_FULL_FLUSH    = 3;
+  Z_FINISH        = 4;
+
+  Z_OK            = 0;
+  Z_STREAM_END    = 1;
+  Z_NEED_DICT     = 2;
+  Z_ERRNO         = (-1);
+  Z_STREAM_ERROR  = (-2);
+  Z_DATA_ERROR    = (-3);
+  Z_MEM_ERROR     = (-4);
+  Z_BUF_ERROR     = (-5);
+  Z_VERSION_ERROR = (-6);
+
+  Z_NO_COMPRESSION       =   0;
+  Z_BEST_SPEED           =   1;
+  Z_BEST_COMPRESSION     =   9;
+  Z_DEFAULT_COMPRESSION  = (-1);
+
+  Z_FILTERED            = 1;
+  Z_HUFFMAN_ONLY        = 2;
+  Z_RLE                 = 3;
+  Z_DEFAULT_STRATEGY    = 0;
+
+  Z_BINARY   = 0;
+  Z_ASCII    = 1;
+  Z_UNKNOWN  = 2;
+
+  Z_DEFLATED = 8;
+
+
+{$L adler32.obj}
+{$L compress.obj}
+{$L crc32.obj}
+{$L deflate.obj}
+{$L infback.obj}
+{$L inffast.obj}
+{$L inflate.obj}
+{$L inftrees.obj}
+{$L trees.obj}
+{$L uncompr.obj}
+{$L zutil.obj}
+
+procedure adler32; external;
+procedure compressBound; external;
+procedure crc32; external;
+procedure deflateInit2_; external;
+procedure deflateParams; external;
+
+function _malloc(Size: Integer): Pointer; cdecl;
+begin
+  Result := AllocMem(Size);
+end;
+
+procedure _free(Block: Pointer); cdecl;
+begin
+  FreeMem(Block);
+end;
+
+procedure _memset(P: Pointer; B: Byte; count: Integer); cdecl;
+begin
+  FillChar(P^, count, B);
+end;
+
+procedure _memcpy(dest, source: Pointer; count: Integer); cdecl;
+begin
+  Move(source^, dest^, count);
+end;
+
+
+
+// deflate compresses data
+function deflateInit_(var strm: TZStreamRec; level: Integer; version: PChar;
+  recsize: Integer): Integer; external;
+function deflate(var strm: TZStreamRec; flush: Integer): Integer; external;
+function deflateEnd(var strm: TZStreamRec): Integer; external;
+
+// inflate decompresses data
+function inflateInit_(var strm: TZStreamRec; version: PChar;
+  recsize: Integer): Integer; external;
+function inflate(var strm: TZStreamRec; flush: Integer): Integer; external;
+function inflateEnd(var strm: TZStreamRec): Integer; external;
+function inflateReset(var strm: TZStreamRec): Integer; external;
+
+
+function zlibAllocMem(AppData: Pointer; Items, Size: Integer): Pointer; cdecl;
+begin
+//  GetMem(Result, Items*Size);
+  Result := AllocMem(Items * Size);
+end;
+
+procedure zlibFreeMem(AppData, Block: Pointer); cdecl;
+begin
+  FreeMem(Block);
+end;
+
+{function zlibCheck(code: Integer): Integer;
+begin
+  Result := code;
+  if code < 0 then
+    raise EZlibError.Create('error');    //!!
+end;}
+
+function CCheck(code: Integer): Integer;
+begin
+  Result := code;
+  if code < 0 then
+    raise ECompressionError.Create('error'); //!!
+end;
+
+function DCheck(code: Integer): Integer;
+begin
+  Result := code;
+  if code < 0 then
+    raise EDecompressionError.Create('error');  //!!
+end;
+
+procedure CompressBuf(const InBuf: Pointer; InBytes: Integer;
+                      out OutBuf: Pointer; out OutBytes: Integer);
+var
+  strm: TZStreamRec;
+  P: Pointer;
+begin
+  FillChar(strm, sizeof(strm), 0);
+  strm.zalloc := zlibAllocMem;
+  strm.zfree := zlibFreeMem;
+  OutBytes := ((InBytes + (InBytes div 10) + 12) + 255) and not 255;
+  GetMem(OutBuf, OutBytes);
+  try
+    strm.next_in := InBuf;
+    strm.avail_in := InBytes;
+    strm.next_out := OutBuf;
+    strm.avail_out := OutBytes;
+    CCheck(deflateInit_(strm, Z_BEST_COMPRESSION, zlib_version, sizeof(strm)));
+    try
+      while CCheck(deflate(strm, Z_FINISH)) <> Z_STREAM_END do
+      begin
+        P := OutBuf;
+        Inc(OutBytes, 256);
+        ReallocMem(OutBuf, OutBytes);
+        strm.next_out := PChar(Integer(OutBuf) + (Integer(strm.next_out) - Integer(P)));
+        strm.avail_out := 256;
+      end;
+    finally
+      CCheck(deflateEnd(strm));
+    end;
+    ReallocMem(OutBuf, strm.total_out);
+    OutBytes := strm.total_out;
+  except
+    FreeMem(OutBuf);
+    raise
+  end;
+end;
+
+
+procedure DecompressBuf(const InBuf: Pointer; InBytes: Integer;
+  OutEstimate: Integer; out OutBuf: Pointer; out OutBytes: Integer);
+var
+  strm: TZStreamRec;
+  P: Pointer;
+  BufInc: Integer;
+begin
+  FillChar(strm, sizeof(strm), 0);
+  strm.zalloc := zlibAllocMem;
+  strm.zfree := zlibFreeMem;
+  BufInc := (InBytes + 255) and not 255;
+  if OutEstimate = 0 then
+    OutBytes := BufInc
+  else
+    OutBytes := OutEstimate;
+  GetMem(OutBuf, OutBytes);
+  try
+    strm.next_in := InBuf;
+    strm.avail_in := InBytes;
+    strm.next_out := OutBuf;
+    strm.avail_out := OutBytes;
+    DCheck(inflateInit_(strm, zlib_version, sizeof(strm)));
+    try
+      while DCheck(inflate(strm, Z_NO_FLUSH)) <> Z_STREAM_END do
+      begin
+        P := OutBuf;
+        Inc(OutBytes, BufInc);
+        ReallocMem(OutBuf, OutBytes);
+        strm.next_out := PChar(Integer(OutBuf) + (Integer(strm.next_out) - Integer(P)));
+        strm.avail_out := BufInc;
+      end;
+    finally
+      DCheck(inflateEnd(strm));
+    end;
+    ReallocMem(OutBuf, strm.total_out);
+    OutBytes := strm.total_out;
+  except
+    FreeMem(OutBuf);
+    raise
+  end;
+end;
+
+procedure DecompressToUserBuf(const InBuf: Pointer; InBytes: Integer;
+  const OutBuf: Pointer; BufSize: Integer);
+var
+  strm: TZStreamRec;
+begin
+  FillChar(strm, sizeof(strm), 0);
+  strm.zalloc := zlibAllocMem;
+  strm.zfree := zlibFreeMem;
+  strm.next_in := InBuf;
+  strm.avail_in := InBytes;
+  strm.next_out := OutBuf;
+  strm.avail_out := BufSize;
+  DCheck(inflateInit_(strm, zlib_version, sizeof(strm)));
+  try
+    if DCheck(inflate(strm, Z_FINISH)) <> Z_STREAM_END then
+      raise EZlibError.CreateRes(@sTargetBufferTooSmall);
+  finally
+    DCheck(inflateEnd(strm));
+  end;
+end;
+
+// TCustomZlibStream
+
+constructor TCustomZLibStream.Create(Strm: TStream);
+begin
+  inherited Create;
+  FStrm := Strm;
+  FStrmPos := Strm.Position;
+  FZRec.zalloc := zlibAllocMem;
+  FZRec.zfree := zlibFreeMem;
+end;
+
+procedure TCustomZLibStream.Progress(Sender: TObject);
+begin
+  if Assigned(FOnProgress) then FOnProgress(Sender);
+end;
+
+
+// TCompressionStream
+
+constructor TCompressionStream.Create(CompressionLevel: TCompressionLevel;
+  Dest: TStream);
+const
+  Levels: array [TCompressionLevel] of ShortInt =
+    (Z_NO_COMPRESSION, Z_BEST_SPEED, Z_DEFAULT_COMPRESSION, Z_BEST_COMPRESSION);
+begin
+  inherited Create(Dest);
+  FZRec.next_out := FBuffer;
+  FZRec.avail_out := sizeof(FBuffer);
+  CCheck(deflateInit_(FZRec, Levels[CompressionLevel], zlib_version, sizeof(FZRec)));
+end;
+
+destructor TCompressionStream.Destroy;
+begin
+  FZRec.next_in := nil;
+  FZRec.avail_in := 0;
+  try
+    if FStrm.Position <> FStrmPos then FStrm.Position := FStrmPos;
+    while (CCheck(deflate(FZRec, Z_FINISH)) <> Z_STREAM_END)
+      and (FZRec.avail_out = 0) do
+    begin
+      FStrm.WriteBuffer(FBuffer, sizeof(FBuffer));
+      FZRec.next_out := FBuffer;
+      FZRec.avail_out := sizeof(FBuffer);
+    end;
+    if FZRec.avail_out < sizeof(FBuffer) then
+      FStrm.WriteBuffer(FBuffer, sizeof(FBuffer) - FZRec.avail_out);
+  finally
+    deflateEnd(FZRec);
+  end;
+  inherited Destroy;
+end;
+
+function TCompressionStream.Read(var Buffer; Count: Longint): Longint;
+begin
+  raise ECompressionError.CreateRes(@sInvalidStreamOp);
+end;
+
+function TCompressionStream.Write(const Buffer; Count: Longint): Longint;
+begin
+  FZRec.next_in := @Buffer;
+  FZRec.avail_in := Count;
+  if FStrm.Position <> FStrmPos then FStrm.Position := FStrmPos;
+  while (FZRec.avail_in > 0) do
+  begin
+    CCheck(deflate(FZRec, 0));
+    if FZRec.avail_out = 0 then
+    begin
+      FStrm.WriteBuffer(FBuffer, sizeof(FBuffer));
+      FZRec.next_out := FBuffer;
+      FZRec.avail_out := sizeof(FBuffer);
+      FStrmPos := FStrm.Position;
+      Progress(Self);
+    end;
+  end;
+  Result := Count;
+end;
+
+function TCompressionStream.Seek(Offset: Longint; Origin: Word): Longint;
+begin
+  if (Offset = 0) and (Origin = soFromCurrent) then
+    Result := FZRec.total_in
+  else
+    raise ECompressionError.CreateRes(@sInvalidStreamOp);
+end;
+
+function TCompressionStream.GetCompressionRate: Single;
+begin
+  if FZRec.total_in = 0 then
+    Result := 0
+  else
+    Result := (1.0 - (FZRec.total_out / FZRec.total_in)) * 100.0;
+end;
+
+
+// TDecompressionStream
+
+constructor TDecompressionStream.Create(Source: TStream);
+begin
+  inherited Create(Source);
+  FZRec.next_in := FBuffer;
+  FZRec.avail_in := 0;
+  DCheck(inflateInit_(FZRec, zlib_version, sizeof(FZRec)));
+end;
+
+destructor TDecompressionStream.Destroy;
+begin
+  FStrm.Seek(-FZRec.avail_in, 1);
+  inflateEnd(FZRec);
+  inherited Destroy;
+end;
+
+function TDecompressionStream.Read(var Buffer; Count: Longint): Longint;
+begin
+  FZRec.next_out := @Buffer;
+  FZRec.avail_out := Count;
+  if FStrm.Position <> FStrmPos then FStrm.Position := FStrmPos;
+  while (FZRec.avail_out > 0) do
+  begin
+    if FZRec.avail_in = 0 then
+    begin
+      FZRec.avail_in := FStrm.Read(FBuffer, sizeof(FBuffer));
+      if FZRec.avail_in = 0 then
+      begin
+        Result := Count - FZRec.avail_out;
+        Exit;
+      end;
+      FZRec.next_in := FBuffer;
+      FStrmPos := FStrm.Position;
+      Progress(Self);
+    end;
+    CCheck(inflate(FZRec, 0));
+  end;
+  Result := Count;
+end;
+
+function TDecompressionStream.Write(const Buffer; Count: Longint): Longint;
+begin
+  raise EDecompressionError.CreateRes(@sInvalidStreamOp);
+end;
+
+function TDecompressionStream.Seek(Offset: Longint; Origin: Word): Longint;
+var
+  I: Integer;
+  Buf: array [0..4095] of Char;
+begin
+  if (Offset = 0) and (Origin = soFromBeginning) then
+  begin
+    DCheck(inflateReset(FZRec));
+    FZRec.next_in := FBuffer;
+    FZRec.avail_in := 0;
+    FStrm.Position := 0;
+    FStrmPos := 0;
+  end
+  else if ( (Offset >= 0) and (Origin = soFromCurrent)) or
+          ( ((Offset - FZRec.total_out) > 0) and (Origin = soFromBeginning)) then
+  begin
+    if Origin = soFromBeginning then Dec(Offset, FZRec.total_out);
+    if Offset > 0 then
+    begin
+      for I := 1 to Offset div sizeof(Buf) do
+        ReadBuffer(Buf, sizeof(Buf));
+      ReadBuffer(Buf, Offset mod sizeof(Buf));
+    end;
+  end
+  else
+    raise EDecompressionError.CreateRes(@sInvalidStreamOp);
+  Result := FZRec.total_out;
+end;
+
+
+end.
diff --git a/zlib/contrib/delphi/ZLibConst.pas b/zlib/contrib/delphi/ZLibConst.pas
new file mode 100644
index 000000000..cdfe13671
--- /dev/null
+++ b/zlib/contrib/delphi/ZLibConst.pas
@@ -0,0 +1,11 @@
+unit ZLibConst;
+
+interface
+
+resourcestring
+  sTargetBufferTooSmall = 'ZLib error: target buffer may be too small';
+  sInvalidStreamOp = 'Invalid stream operation';
+
+implementation
+
+end.
diff --git a/zlib/contrib/delphi/readme.txt b/zlib/contrib/delphi/readme.txt
new file mode 100644
index 000000000..2dc9a8bba
--- /dev/null
+++ b/zlib/contrib/delphi/readme.txt
@@ -0,0 +1,76 @@
+
+Overview
+========
+
+This directory contains an update to the ZLib interface unit,
+distributed by Borland as a Delphi supplemental component.
+
+The original ZLib unit is Copyright (c) 1997,99 Borland Corp.,
+and is based on zlib version 1.0.4.  There are a series of bugs
+and security problems associated with that old zlib version, and
+we recommend the users to update their ZLib unit.
+
+
+Summary of modifications
+========================
+
+- Improved makefile, adapted to zlib version 1.2.1.
+
+- Some field types from TZStreamRec are changed from Integer to
+  Longint, for consistency with the zlib.h header, and for 64-bit
+  readiness.
+
+- The zlib_version constant is updated.
+
+- The new Z_RLE strategy has its corresponding symbolic constant.
+
+- The allocation and deallocation functions and function types
+  (TAlloc, TFree, zlibAllocMem and zlibFreeMem) are now cdecl,
+  and _malloc and _free are added as C RTL stubs.  As a result,
+  the original C sources of zlib can be compiled out of the box,
+  and linked to the ZLib unit.
+
+
+Suggestions for improvements
+============================
+
+Currently, the ZLib unit provides only a limited wrapper around
+the zlib library, and much of the original zlib functionality is
+missing.  Handling compressed file formats like ZIP/GZIP or PNG
+cannot be implemented without having this functionality.
+Applications that handle these formats are either using their own,
+duplicated code, or not using the ZLib unit at all.
+
+Here are a few suggestions:
+
+- Checksum class wrappers around adler32() and crc32(), similar
+  to the Java classes that implement the java.util.zip.Checksum
+  interface.
+
+- The ability to read and write raw deflate streams, without the
+  zlib stream header and trailer.  Raw deflate streams are used
+  in the ZIP file format.
+
+- The ability to read and write gzip streams, used in the GZIP
+  file format, and normally produced by the gzip program.
+
+- The ability to select a different compression strategy, useful
+  to PNG and MNG image compression, and to multimedia compression
+  in general.  Besides the compression level
+
+    TCompressionLevel = (clNone, clFastest, clDefault, clMax);
+
+  which, in fact, could have used the 'z' prefix and avoided
+  TColor-like symbols
+
+    TCompressionLevel = (zcNone, zcFastest, zcDefault, zcMax);
+
+  there could be a compression strategy
+
+    TCompressionStrategy = (zsDefault, zsFiltered, zsHuffmanOnly, zsRle);
+
+- ZIP and GZIP stream handling via TStreams.
+
+
+--
+Cosmin Truta <cosmint@cs.ubbcluj.ro>
diff --git a/zlib/contrib/delphi/zlibd32.mak b/zlib/contrib/delphi/zlibd32.mak
new file mode 100644
index 000000000..88fafa0b1
--- /dev/null
+++ b/zlib/contrib/delphi/zlibd32.mak
@@ -0,0 +1,93 @@
+# Makefile for zlib
+# For use with Delphi and C++ Builder under Win32
+# Updated for zlib 1.2.x by Cosmin Truta
+
+# ------------ Borland C++ ------------
+
+# This project uses the Delphi (fastcall/register) calling convention:
+LOC = -DZEXPORT=__fastcall -DZEXPORTVA=__cdecl
+
+CC = bcc32
+LD = bcc32
+AR = tlib
+# do not use "-pr" in CFLAGS
+CFLAGS = -a -d -k- -O2 $(LOC)
+LDFLAGS =
+
+
+# variables
+ZLIB_LIB = zlib.lib
+
+OBJ1 = adler32.obj compress.obj crc32.obj deflate.obj gzio.obj infback.obj
+OBJ2 = inffast.obj inflate.obj inftrees.obj trees.obj uncompr.obj zutil.obj
+OBJP1 = +adler32.obj+compress.obj+crc32.obj+deflate.obj+gzio.obj+infback.obj
+OBJP2 = +inffast.obj+inflate.obj+inftrees.obj+trees.obj+uncompr.obj+zutil.obj
+
+
+# targets
+all: $(ZLIB_LIB) example.exe minigzip.exe
+
+.c.obj:
+	$(CC) -c $(CFLAGS) $*.c
+
+adler32.obj: adler32.c zlib.h zconf.h
+
+compress.obj: compress.c zlib.h zconf.h
+
+crc32.obj: crc32.c zlib.h zconf.h crc32.h
+
+deflate.obj: deflate.c deflate.h zutil.h zlib.h zconf.h
+
+gzio.obj: gzio.c zutil.h zlib.h zconf.h
+
+infback.obj: infback.c zutil.h zlib.h zconf.h inftrees.h inflate.h \
+ inffast.h inffixed.h
+
+inffast.obj: inffast.c zutil.h zlib.h zconf.h inftrees.h inflate.h \
+ inffast.h
+
+inflate.obj: inflate.c zutil.h zlib.h zconf.h inftrees.h inflate.h \
+ inffast.h inffixed.h
+
+inftrees.obj: inftrees.c zutil.h zlib.h zconf.h inftrees.h
+
+trees.obj: trees.c zutil.h zlib.h zconf.h deflate.h trees.h
+
+uncompr.obj: uncompr.c zlib.h zconf.h
+
+zutil.obj: zutil.c zutil.h zlib.h zconf.h
+
+example.obj: example.c zlib.h zconf.h
+
+minigzip.obj: minigzip.c zlib.h zconf.h
+
+
+# For the sake of the old Borland make,
+# the command line is cut to fit in the MS-DOS 128 byte limit:
+$(ZLIB_LIB): $(OBJ1) $(OBJ2)
+	-del $(ZLIB_LIB)
+	$(AR) $(ZLIB_LIB) $(OBJP1)
+	$(AR) $(ZLIB_LIB) $(OBJP2)
+
+
+# testing
+test: example.exe minigzip.exe
+	example
+	echo hello world | minigzip | minigzip -d
+
+example.exe: example.obj $(ZLIB_LIB)
+	$(LD) $(LDFLAGS) example.obj $(ZLIB_LIB)
+
+minigzip.exe: minigzip.obj $(ZLIB_LIB)
+	$(LD) $(LDFLAGS) minigzip.obj $(ZLIB_LIB)
+
+
+# cleanup
+clean:
+	-del *.obj
+	-del *.exe
+	-del *.lib
+	-del *.tds
+	-del zlib.bak
+	-del foo.gz
+