From 23e2ddeb0f81d5ee9c6d01cf0b768eeb1c27555c Mon Sep 17 00:00:00 2001 From: marha Date: Sat, 22 May 2010 13:47:02 +0000 Subject: xserver git update 22/5/2010 --- xorg-server/dix/dixfonts.c | 6 +- xorg-server/doc/Xserver.man.pre | 1192 ++++++++++---------- xorg-server/hw/vfb/InitInput.c | 308 +++-- xorg-server/hw/vfb/Makefile.am | 103 +- xorg-server/hw/vfb/lk201kbd.h | 158 --- .../hw/xfree86/os-support/solaris/sun_init.c | 102 +- xorg-server/include/dix.h | 2 +- xorg-server/include/dixstruct.h | 378 +++---- xorg-server/include/extnsionst.h | 224 ++-- 9 files changed, 1180 insertions(+), 1293 deletions(-) delete mode 100644 xorg-server/hw/vfb/lk201kbd.h diff --git a/xorg-server/dix/dixfonts.c b/xorg-server/dix/dixfonts.c index 239431e2a..d6ddf04e1 100644 --- a/xorg-server/dix/dixfonts.c +++ b/xorg-server/dix/dixfonts.c @@ -1173,7 +1173,6 @@ int doPolyText(ClientPtr client, PTclosurePtr c) { FontPtr pFont = c->pGC->font, oldpFont; - Font fid, oldfid; int err = Success, lgerr; /* err is in X error, not font error, space */ enum { NEVER_SLEPT, START_SLEEP, SLEEPING } client_state = NEVER_SLEPT; FontPathElementPtr fpe; @@ -1221,6 +1220,7 @@ doPolyText(ClientPtr client, PTclosurePtr c) { if (*c->pElt == FontChange) { + Font fid; if (c->endReq - c->pElt < FontShiftSize) { err = BadLength; @@ -1228,7 +1228,6 @@ doPolyText(ClientPtr client, PTclosurePtr c) } oldpFont = pFont; - oldfid = fid; fid = ((Font)*(c->pElt+4)) /* big-endian */ | ((Font)*(c->pElt+3)) << 8 @@ -1238,9 +1237,8 @@ doPolyText(ClientPtr client, PTclosurePtr c) client, DixUseAccess); if (err != Success) { - /* restore pFont and fid for step 4 (described below) */ + /* restore pFont for step 4 (described below) */ pFont = oldpFont; - fid = oldfid; /* If we're in START_SLEEP mode, the following step shortens the request... in the unlikely event that diff --git a/xorg-server/doc/Xserver.man.pre b/xorg-server/doc/Xserver.man.pre index 8144c8ad4..4926960c2 100644 --- a/xorg-server/doc/Xserver.man.pre +++ b/xorg-server/doc/Xserver.man.pre @@ -1,600 +1,592 @@ -.\" $Xorg: Xserver.man,v 1.4 2001/02/09 02:04:07 xorgcvs Exp $ -.\" $XdotOrg: xserver/xorg/doc/Xserver.man.pre,v 1.4 2005/12/23 20:11:12 alanc Exp $ -.\" Copyright 1984 - 1991, 1993, 1994, 1998 The Open Group -.\" -.\" Permission to use, copy, modify, distribute, and sell this software and its -.\" documentation for any purpose is hereby granted without fee, provided that -.\" the above copyright notice appear in all copies and that both that -.\" copyright notice and this permission notice appear in supporting -.\" documentation. -.\" -.\" The above copyright notice and this permission notice shall be included -.\" in all copies or substantial portions of the Software. -.\" -.\" THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS -.\" OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF -.\" MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. -.\" IN NO EVENT SHALL THE OPEN GROUP BE LIABLE FOR ANY CLAIM, DAMAGES OR -.\" OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, -.\" ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR -.\" OTHER DEALINGS IN THE SOFTWARE. -.\" -.\" Except as contained in this notice, the name of The Open Group shall -.\" not be used in advertising or otherwise to promote the sale, use or -.\" other dealings in this Software without prior written authorization -.\" from The Open Group. -.\" $XFree86: xc/programs/Xserver/Xserver.man,v 3.31 2004/01/10 22:27:46 dawes Exp $ -.\" shorthand for double quote that works everywhere. -.ds q \N'34' -.TH XSERVER 1 __xorgversion__ -.SH NAME -Xserver \- X Window System display server -.SH SYNOPSIS -.B X -[option ...] -.SH DESCRIPTION -.I X -is the generic name for the X Window System display server. It is -frequently a link or a copy of the appropriate server binary for -driving the most frequently used server on a given machine. -.SH "STARTING THE SERVER" -The X server is usually started from the X Display Manager program -\fIxdm\fP(1) or a similar display manager program. -This utility is run from the system boot files and takes care of keeping -the server running, prompting for usernames and passwords, and starting up -the user sessions. -.PP -Installations that run more than one window system may need to use the -\fIxinit\fP(1) utility instead of a display manager. However, \fIxinit\fP is -to be considered a tool for building startup scripts and is not -intended for use by end users. Site administrators are \fBstrongly\fP -urged to use a display manager, or build other interfaces for novice users. -.PP -The X server may also be started directly by the user, though this -method is usually reserved for testing and is not recommended for -normal operation. On some platforms, the user must have special -permission to start the X server, often because access to certain -devices (e.g. \fI/dev/mouse\fP) is restricted. -.PP -When the X server starts up, it typically takes over the display. If -you are running on a workstation whose console is the display, you may -not be able to log into the console while the server is running. -.SH OPTIONS -Many X servers have device-specific command line options. See the manual -pages for the individual servers for more details; a list of -server-specific manual pages is provided in the SEE ALSO section below. -.PP -All of the X servers accept the command line options described below. -Some X servers may have alternative ways of providing the parameters -described here, but the values provided via the command line options -should override values specified via other mechanisms. -.TP 8 -.B :\fIdisplaynumber\fP -The X server runs as the given \fIdisplaynumber\fP, which by default is 0. -If multiple X servers are to run simultaneously on a host, each must have -a unique display number. See the DISPLAY -NAMES section of the \fIX\fP(__miscmansuffix__) manual page to learn how to -specify which display number clients should try to use. -.TP 8 -.B \-a \fInumber\fP -sets pointer acceleration (i.e. the ratio of how much is reported to how much -the user actually moved the pointer). -.TP 8 -.B \-ac -disables host-based access control mechanisms. Enables access by any host, -and permits any host to modify the access control list. -Use with extreme caution. -This option exists primarily for running test suites remotely. -.TP 8 -.B \-audit \fIlevel\fP -sets the audit trail level. The default level is 1, meaning only connection -rejections are reported. Level 2 additionally reports all successful -connections and disconnects. Level 4 enables messages from the -SECURITY extension, if present, including generation and revocation of -authorizations and violations of the security policy. -Level 0 turns off the audit trail. -Audit lines are sent as standard error output. -.TP 8 -.B \-auth \fIauthorization-file\fP -specifies a file which contains a collection of authorization records used -to authenticate access. See also the \fIxdm\fP(1) and -\fIXsecurity\fP(__miscmansuffix__) manual pages. -.TP 8 -.B \-bs -disables backing store support on all screens. -.TP 8 -.B \-br -sets the default root window to solid black instead of the standard root weave -pattern. -.TP 8 -.B \-c -turns off key-click. -.TP 8 -.B c \fIvolume\fP -sets key-click volume (allowable range: 0-100). -.TP 8 -.B \-cc \fIclass\fP -sets the visual class for the root window of color screens. -The class numbers are as specified in the X protocol. -Not obeyed by all servers. -.ig -.TP 8 -.B \-config \fIfilename\fP -reads more options from the given file. Options in the file may be separated -by newlines if desired. If a '#' character appears on a line, all characters -between it and the next newline are ignored, providing a simple commenting -facility. The \fB\-config\fP option itself may appear in the file. -.BR NOTE : -This option is disabled when the Xserver is run with an effective uid -different from the user's real uid. -.. -.TP 8 -.B \-core -causes the server to generate a core dump on fatal errors. -.TP 8 -.B \-deferglyphs \fIwhichfonts\fP -specifies the types of fonts for which the server should attempt to use -deferred glyph loading. \fIwhichfonts\fP can be all (all fonts), -none (no fonts), or 16 (16 bit fonts only). -.TP 8 -.B \-dpi \fIresolution\fP -sets the resolution for all screens, in dots per inch. -To be used when the server cannot determine the screen size(s) from the -hardware. -.TP 8 -.B dpms -enables DPMS (display power management services), where supported. The -default state is platform and configuration specific. -.TP 8 -.B \-dpms -disables DPMS (display power management services). The default state -is platform and configuration specific. -.TP 8 -.BI \-extension extensionName -disables named extension. If an unknown extension name is specified, -a list of accepted extension names is printed. -.TP 8 -.BI \+extension extensionName -enables named extension. If an unknown extension name is specified, -a list of accepted extension names is printed. -.TP 8 -.B \-f \fIvolume\fP -sets feep (bell) volume (allowable range: 0-100). -.TP 8 -.B \-fc \fIcursorFont\fP -sets default cursor font. -.TP 8 -.B \-fn \fIfont\fP -sets the default font. -.TP 8 -.B \-fp \fIfontPath\fP -sets the search path for fonts. This path is a comma separated list -of directories which the X server searches for font databases. -See the FONTS section of this manual page for more information and the default -list. -.TP 8 -.B \-help -prints a usage message. -.TP 8 -.B \-I -causes all remaining command line arguments to be ignored. -.TP 8 -.B \-maxbigreqsize \fIsize\fP -sets the maximum big request to -.I size -MB. -.TP 8 -.B \-nolisten \fItrans-type\fP -disables a transport type. For example, TCP/IP connections can be disabled -with -.BR "\-nolisten tcp" . -This option may be issued multiple times to disable listening to different -transport types. -.TP 8 -.B \-noreset -prevents a server reset when the last client connection is closed. This -overrides a previous -.B \-terminate -command line option. -.TP 8 -.B \-p \fIminutes\fP -sets screen-saver pattern cycle time in minutes. -.TP 8 -.B \-pn -permits the server to continue running if it fails to establish all of -its well-known sockets (connection points for clients), but -establishes at least one. This option is set by default. -.TP 8 -.B \-nopn -causes the server to exit if it fails to establish all of its well-known -sockets (connection points for clients). -.TP 8 -.B \-r -turns off auto-repeat. -.TP 8 -.B r -turns on auto-repeat. -.TP 8 -.B -retro -starts the stipple with the classic stipple and cursor visible. The default -is to start with a black root window, and to suppress display of the cursor -until the first time an application calls XDefineCursor(). For the Xorg -server, this also sets the default for the DontZap option to FALSE. For -kdrive servers, this implies -zap. -.TP 8 -.B \-s \fIminutes\fP -sets screen-saver timeout time in minutes. -.TP 8 -.B \-su -disables save under support on all screens. -.TP 8 -.B \-t \fInumber\fP -sets pointer acceleration threshold in pixels (i.e. after how many pixels -pointer acceleration should take effect). -.TP 8 -.B \-terminate -causes the server to terminate at server reset, instead of continuing to run. -This overrides a previous -.B \-noreset -command line option. -.TP 8 -.B \-to \fIseconds\fP -sets default connection timeout in seconds. -.TP 8 -.B \-tst -disables all testing extensions (e.g., XTEST, XTrap, XTestExtension1, RECORD). -.TP 8 -.B tty\fIxx\fP -ignored, for servers started the ancient way (from init). -.TP 8 -.B v -sets video-off screen-saver preference. -.TP 8 -.B \-v -sets video-on screen-saver preference. -.TP 8 -.B \-wm -forces the default backing-store of all windows to be WhenMapped. This -is a backdoor way of getting backing-store to apply to all windows. -Although all mapped windows will have backing store, the backing store -attribute value reported by the server for a window will be the last -value established by a client. If it has never been set by a client, -the server will report the default value, NotUseful. This behavior is -required by the X protocol, which allows the server to exceed the -client's backing store expectations but does not provide a way to tell -the client that it is doing so. -.TP 8 -.B \-wr -sets the default root window to solid white instead of the standard root weave -pattern. -.TP 8 -.B \-x \fIextension\fP -loads the specified extension at init. -This is a no-op for most implementations. -.TP 8 -.B [+-]xinerama -enables(+) or disables(-) the XINERAMA extension. The default state is -platform and configuration specific. -.SH SERVER DEPENDENT OPTIONS -Some X servers accept the following options: -.TP 8 -.B \-ld \fIkilobytes\fP -sets the data space limit of the server to the specified number of kilobytes. -A value of zero makes the data size as large as possible. The default value -of \-1 leaves the data space limit unchanged. -.TP 8 -.B \-lf \fIfiles\fP -sets the number-of-open-files limit of the server to the specified number. -A value of zero makes the limit as large as possible. The default value -of \-1 leaves the limit unchanged. -.TP 8 -.B \-ls \fIkilobytes\fP -sets the stack space limit of the server to the specified number of kilobytes. -A value of zero makes the stack size as large as possible. The default value -of \-1 leaves the stack space limit unchanged. -.TP 8 -.B \-logo -turns on the X Window System logo display in the screen-saver. -There is currently no way to change this from a client. -.TP 8 -.B nologo -turns off the X Window System logo display in the screen-saver. -There is currently no way to change this from a client. -.TP 8 -.B \-render -.BR default | mono | gray | color -sets the color allocation policy that will be used by the render extension. -.RS 8 -.TP 8 -.I default -selects the default policy defined for the display depth of the X -server. -.TP 8 -.I mono -don't use any color cell. -.TP 8 -.I gray -use a gray map of 13 color cells for the X render extension. -.TP 8 -.I color -use a color cube of at most 4*4*4 colors (that is 64 color cells). -.RE -.TP 8 -.B \-dumbSched -disables smart scheduling on platforms that support the smart scheduler. -.TP -.B \-schedInterval \fIinterval\fP -sets the smart scheduler's scheduling interval to -.I interval -milliseconds. -.SH XDMCP OPTIONS -X servers that support XDMCP have the following options. -See the \fIX Display Manager Control Protocol\fP specification for more -information. -.TP 8 -.B \-query \fIhostname\fP -enables XDMCP and sends Query packets to the specified -.IR hostname . -.TP 8 -.B \-broadcast -enable XDMCP and broadcasts BroadcastQuery packets to the network. The -first responding display manager will be chosen for the session. -.TP 8 -.B \-multicast [\fIaddress\fP [\fIhop count\fP]] -Enable XDMCP and multicast BroadcastQuery packets to the network. -The first responding display manager is chosen for the session. If an -address is specified, the multicast is sent to that address. If no -address is specified, the multicast is sent to the default XDMCP IPv6 -multicast group. If a hop count is specified, it is used as the maximum -hop count for the multicast. If no hop count is specified, the multicast -is set to a maximum of 1 hop, to prevent the multicast from being routed -beyond the local network. -.TP 8 -.B \-indirect \fIhostname\fP -enables XDMCP and send IndirectQuery packets to the specified -.IR hostname . -.TP 8 -.B \-port \fIport-number\fP -uses the specified \fIport-number\fP for XDMCP packets, instead of the -default. This option must be specified before any \-query, \-broadcast, -\-multicast, or \-indirect options. -.TP 8 -.B \-from \fIlocal-address\fP -specifies the local address to connect from (useful if the connecting host -has multiple network interfaces). The \fIlocal-address\fP may be expressed -in any form acceptable to the host platform's \fIgethostbyname\fP(3) -implementation. -.TP 8 -.B \-once -causes the server to terminate (rather than reset) when the XDMCP session -ends. -.TP 8 -.B \-class \fIdisplay-class\fP -XDMCP has an additional display qualifier used in resource lookup for -display-specific options. This option sets that value, by default it -is "MIT-Unspecified" (not a very useful value). -.TP 8 -.B \-cookie \fIxdm-auth-bits\fP -When testing XDM-AUTHENTICATION-1, a private key is shared between the -server and the manager. This option sets the value of that private -data (not that it is very private, being on the command line!). -.TP 8 -.B \-displayID \fIdisplay-id\fP -Yet another XDMCP specific value, this one allows the display manager to -identify each display so that it can locate the shared key. -.SH XKEYBOARD OPTIONS -X servers that support the XKEYBOARD (a.k.a. \*qXKB\*q) extension accept the -following options. All layout files specified on the command line must be -located in the XKB base directory or a subdirectory, and specified as the -relative path from the XKB base directory. The default XKB base directory is -.IR __projectroot__/lib/X11/xkb . -.TP 8 -.BR [+-]accessx " [ \fItimeout\fP [ \fItimeout_mask\fP [ \fIfeedback\fP [ \fIoptions_mask\fP ] ] ] ]" -enables(+) or disables(-) AccessX key sequences. -.TP 8 -.B \-xkbdir \fIdirectory\fP -base directory for keyboard layout files. This option is not available -for setuid X servers (i.e., when the X server's real and effective uids -are different). -.TP 8 -.B \-ardelay \fImilliseconds\fP -sets the autorepeat delay (length of time in milliseconds that a key must -be depressed before autorepeat starts). -.TP 8 -.B \-arinterval \fImilliseconds\fP -sets the autorepeat interval (length of time in milliseconds that should -elapse between autorepeat-generated keystrokes). -.TP 8 -.B \-xkbmap \fIfilename\fP -loads keyboard description in \fIfilename\fP on server startup. -.SH "NETWORK CONNECTIONS" -The X server supports client connections via a platform-dependent subset of -the following transport types: TCP\/IP, Unix Domain sockets, DECnet, -and several varieties of SVR4 local connections. See the DISPLAY -NAMES section of the \fIX\fP(__miscmansuffix__) manual page to learn how to -specify which transport type clients should try to use. -.SH GRANTING ACCESS -The X server implements a platform-dependent subset of the following -authorization protocols: MIT-MAGIC-COOKIE-1, XDM-AUTHORIZATION-1, -XDM-AUTHORIZATION-2, SUN-DES-1, and MIT-KERBEROS-5. See the -\fIXsecurity\fP(__miscmansuffix__) manual page for information on the -operation of these protocols. -.PP -Authorization data required by the above protocols is passed to the -server in a private file named with the \fB\-auth\fP command line -option. Each time the server is about to accept the first connection -after a reset (or when the server is starting), it reads this file. -If this file contains any authorization records, the local host is not -automatically allowed access to the server, and only clients which -send one of the authorization records contained in the file in the -connection setup information will be allowed access. See the -\fIXau\fP manual page for a description of the binary format of this -file. See \fIxauth\fP(1) for maintenance of this file, and distribution -of its contents to remote hosts. -.PP -The X server also uses a host-based access control list for deciding -whether or not to accept connections from clients on a particular machine. -If no other authorization mechanism is being used, -this list initially consists of the host on which the server is running as -well as any machines listed in the file \fI/etc/X\fBn\fI.hosts\fR, where -\fBn\fP is the display number of the server. Each line of the file should -contain either an Internet hostname (e.g. expo.lcs.mit.edu) or a DECnet -hostname in double colon format (e.g. hydra::) or a complete name in the format -\fIfamily\fP:\fIname\fP as described in the \fIxhost\fP(1) manual page. -There should be no leading or trailing spaces on any lines. For example: -.sp -.in +8 -.nf -joesworkstation -corporate.company.com -star:: -inet:bigcpu -local: -.fi -.in -8 -.PP -Users can add or remove hosts from this list and enable or disable access -control using the \fIxhost\fP command from the same machine as the server. -.PP -If the X FireWall Proxy (\fIxfwp\fP) is being used without a sitepolicy, -host-based authorization must be turned on for clients to be able to -connect to the X server via the \fIxfwp\fP. If \fIxfwp\fP is run without -a configuration file and thus no sitepolicy is defined, if \fIxfwp\fP -is using an X server where xhost + has been run to turn off host-based -authorization checks, when a client tries to connect to this X server -via \fIxfwp\fP, the X server will deny the connection. See \fIxfwp\fP(1) -for more information about this proxy. -.PP -The X protocol intrinsically does not have any notion of window operation -permissions or place any restrictions on what a client can do; if a program can -connect to a display, it has full run of the screen. -X servers that support the SECURITY extension fare better because clients -can be designated untrusted via the authorization they use to connect; see -the \fIxauth\fP(1) manual page for details. Restrictions are imposed -on untrusted clients that curtail the mischief they can do. See the SECURITY -extension specification for a complete list of these restrictions. -.PP -Sites that have better -authentication and authorization systems might wish to make -use of the hooks in the libraries and the server to provide additional -security models. -.SH SIGNALS -The X server attaches special meaning to the following signals: -.TP 8 -.I SIGHUP -This signal causes the server to close all existing connections, free all -resources, and restore all defaults. It is sent by the display manager -whenever the main user's main application (usually an \fIxterm\fP or window -manager) exits to force the server to clean up and prepare for the next -user. -.TP 8 -.I SIGTERM -This signal causes the server to exit cleanly. -.TP 8 -.I SIGUSR1 -This signal is used quite differently from either of the above. When the -server starts, it checks to see if it has inherited SIGUSR1 as SIG_IGN -instead of the usual SIG_DFL. In this case, the server sends a SIGUSR1 to -its parent process after it has set up the various connection schemes. -\fIXdm\fP uses this feature to recognize when connecting to the server -is possible. -.SH FONTS -The X server can obtain fonts from directories and/or from font servers. -The list of directories and font servers -the X server uses when trying to open a font is controlled -by the \fIfont path\fP. -.LP -The default font path is -__default_font_path__ . -.LP -A special kind of directory can be specified using the \fBcatalogue\fP: -prefix. Directories specified this way can contain symlinks pointing to the -real font directories. See the FONTPATH.D section for details. -.LP -The font path can be set with the \fB\-fp\fP option or by \fIxset\fP(1) -after the server has started. -.SH "FONTPATH.D" -You can specify a special kind of font path in the form \fBcatalogue:\fR. -The directory specified after the catalogue: prefix will be scanned for symlinks -and each symlink destination will be added as a local fontfile FPE. -.PP -The symlink can be suffixed by attributes such as '\fBunscaled\fR', which -will be passed through to the underlying fontfile FPE. The only exception is -the newly introduced '\fBpri\fR' attribute, which will be used for ordering -the font paths specified by the symlinks. - -An example configuration: - -.nf - 75dpi:unscaled:pri=20 \-> /usr/share/X11/fonts/75dpi - ghostscript:pri=60 \-> /usr/share/fonts/default/ghostscript - misc:unscaled:pri=10 \-> /usr/share/X11/fonts/misc - type1:pri=40 \-> /usr/share/X11/fonts/Type1 - type1:pri=50 \-> /usr/share/fonts/default/Type1 -.fi - -This will add /usr/share/X11/fonts/misc as the first FPE with the attribute -'unscaled', second FPE will be /usr/share/X11/fonts/75dpi, also with -the attribute unscaled etc. This is functionally equivalent to setting -the following font path: - -.nf - /usr/share/X11/fonts/misc:unscaled, - /usr/share/X11/fonts/75dpi:unscaled, - /usr/share/X11/fonts/Type1, - /usr/share/fonts/default/Type1, - /usr/share/fonts/default/ghostscript -.fi - -.SH FILES -.TP 30 -.I /etc/X\fBn\fP.hosts -Initial access control list for display number \fBn\fP -.TP 30 -.IR __datadir__/fonts/X11/misc , __datadir__/fonts/X11/75dpi , __datadir__/fonts/X11/100dpi -Bitmap font directories -.TP 30 -.IR __datadir__/fonts/X11/TTF , __datadir__/fonts/X11/Type1 -Outline font directories -.TP 30 -.I /tmp/.X11-unix/X\fBn\fP -Unix domain socket for display number \fBn\fP -.TP 30 -.I /usr/adm/X\fBn\fPmsgs -Error log file for display number \fBn\fP if run from \fIinit\fP(__adminmansuffix__) -.TP 30 -.I __projectroot__/lib/X11/xdm/xdm-errors -Default error log file if the server is run from \fIxdm\fP(1) -.SH "SEE ALSO" -General information: \fIX\fP(__miscmansuffix__) -.PP -Protocols: -.I "X Window System Protocol," -.I "The X Font Service Protocol," -.I "X Display Manager Control Protocol" -.PP -Fonts: \fIbdftopcf\fP(1), \fImkfontdir\fP(1), \fImkfontscale\fP(1), -\fIxfs\fP(1), \fIxlsfonts\fP(1), \fIxfontsel\fP(1), \fIxfd\fP(1), -.I "X Logical Font Description Conventions" -.PP -Security: \fIXsecurity\fP(__miscmansuffix__), \fIxauth\fP(1), \fIXau\fP(1), -\fIxdm\fP(1), \fIxhost\fP(1), \fIxfwp\fP(1), -.I "Security Extension Specification" -.PP -Starting the server: \fIstartx\fP(1), \fIxdm\fP(1), \fIxinit\fP(1) -.PP -Controlling the server once started: \fIxset\fP(1), \fIxsetroot\fP(1), -\fIxhost\fP(1) -.PP -Server-specific man pages: -\fIXorg\fP(1), \fIXdmx\fP(1), \fIXephyr\fP(1), \fIXnest\fP(1), -\fIXvfb\fP(1), \fIXDarwin\fP(1), \fIXWin\fP(1). -.PP -Server internal documentation: -.I "Definition of the Porting Layer for the X v11 Sample Server" -.SH AUTHORS -The sample server was originally written by Susan Angebranndt, Raymond -Drewry, Philip Karlton, and Todd Newman, from Digital Equipment -Corporation, with support from a large cast. It has since been -extensively rewritten by Keith Packard and Bob Scheifler, from MIT. -Dave Wiggins took over post-R5 and made substantial improvements. +.\" $Xorg: Xserver.man,v 1.4 2001/02/09 02:04:07 xorgcvs Exp $ +.\" $XdotOrg: xserver/xorg/doc/Xserver.man.pre,v 1.4 2005/12/23 20:11:12 alanc Exp $ +.\" Copyright 1984 - 1991, 1993, 1994, 1998 The Open Group +.\" +.\" Permission to use, copy, modify, distribute, and sell this software and its +.\" documentation for any purpose is hereby granted without fee, provided that +.\" the above copyright notice appear in all copies and that both that +.\" copyright notice and this permission notice appear in supporting +.\" documentation. +.\" +.\" The above copyright notice and this permission notice shall be included +.\" in all copies or substantial portions of the Software. +.\" +.\" THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS +.\" OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF +.\" MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. +.\" IN NO EVENT SHALL THE OPEN GROUP BE LIABLE FOR ANY CLAIM, DAMAGES OR +.\" OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, +.\" ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR +.\" OTHER DEALINGS IN THE SOFTWARE. +.\" +.\" Except as contained in this notice, the name of The Open Group shall +.\" not be used in advertising or otherwise to promote the sale, use or +.\" other dealings in this Software without prior written authorization +.\" from The Open Group. +.\" $XFree86: xc/programs/Xserver/Xserver.man,v 3.31 2004/01/10 22:27:46 dawes Exp $ +.\" shorthand for double quote that works everywhere. +.ds q \N'34' +.TH XSERVER 1 __xorgversion__ +.SH NAME +Xserver \- X Window System display server +.SH SYNOPSIS +.B X +[option ...] +.SH DESCRIPTION +.I X +is the generic name for the X Window System display server. It is +frequently a link or a copy of the appropriate server binary for +driving the most frequently used server on a given machine. +.SH "STARTING THE SERVER" +The X server is usually started from the X Display Manager program +\fIxdm\fP(1) or a similar display manager program. +This utility is run from the system boot files and takes care of keeping +the server running, prompting for usernames and passwords, and starting up +the user sessions. +.PP +Installations that run more than one window system may need to use the +\fIxinit\fP(1) utility instead of a display manager. However, \fIxinit\fP is +to be considered a tool for building startup scripts and is not +intended for use by end users. Site administrators are \fBstrongly\fP +urged to use a display manager, or build other interfaces for novice users. +.PP +The X server may also be started directly by the user, though this +method is usually reserved for testing and is not recommended for +normal operation. On some platforms, the user must have special +permission to start the X server, often because access to certain +devices (e.g. \fI/dev/mouse\fP) is restricted. +.PP +When the X server starts up, it typically takes over the display. If +you are running on a workstation whose console is the display, you may +not be able to log into the console while the server is running. +.SH OPTIONS +Many X servers have device-specific command line options. See the manual +pages for the individual servers for more details; a list of +server-specific manual pages is provided in the SEE ALSO section below. +.PP +All of the X servers accept the command line options described below. +Some X servers may have alternative ways of providing the parameters +described here, but the values provided via the command line options +should override values specified via other mechanisms. +.TP 8 +.B :\fIdisplaynumber\fP +The X server runs as the given \fIdisplaynumber\fP, which by default is 0. +If multiple X servers are to run simultaneously on a host, each must have +a unique display number. See the DISPLAY +NAMES section of the \fIX\fP(__miscmansuffix__) manual page to learn how to +specify which display number clients should try to use. +.TP 8 +.B \-a \fInumber\fP +sets pointer acceleration (i.e. the ratio of how much is reported to how much +the user actually moved the pointer). +.TP 8 +.B \-ac +disables host-based access control mechanisms. Enables access by any host, +and permits any host to modify the access control list. +Use with extreme caution. +This option exists primarily for running test suites remotely. +.TP 8 +.B \-audit \fIlevel\fP +sets the audit trail level. The default level is 1, meaning only connection +rejections are reported. Level 2 additionally reports all successful +connections and disconnects. Level 4 enables messages from the +SECURITY extension, if present, including generation and revocation of +authorizations and violations of the security policy. +Level 0 turns off the audit trail. +Audit lines are sent as standard error output. +.TP 8 +.B \-auth \fIauthorization-file\fP +specifies a file which contains a collection of authorization records used +to authenticate access. See also the \fIxdm\fP(1) and +\fIXsecurity\fP(__miscmansuffix__) manual pages. +.TP 8 +.B \-br +sets the default root window to solid black instead of the standard root weave +pattern. This is the default unless -retro or -wr is specified. +.TP 8 +.B \-bs +disables backing store support on all screens. +.TP 8 +.B \-c +turns off key-click. +.TP 8 +.B c \fIvolume\fP +sets key-click volume (allowable range: 0-100). +.TP 8 +.B \-cc \fIclass\fP +sets the visual class for the root window of color screens. +The class numbers are as specified in the X protocol. +Not obeyed by all servers. +.TP 8 +.B \-core +causes the server to generate a core dump on fatal errors. +.TP 8 +.B \-deferglyphs \fIwhichfonts\fP +specifies the types of fonts for which the server should attempt to use +deferred glyph loading. \fIwhichfonts\fP can be all (all fonts), +none (no fonts), or 16 (16 bit fonts only). +.TP 8 +.B \-dpi \fIresolution\fP +sets the resolution for all screens, in dots per inch. +To be used when the server cannot determine the screen size(s) from the +hardware. +.TP 8 +.B dpms +enables DPMS (display power management services), where supported. The +default state is platform and configuration specific. +.TP 8 +.B \-dpms +disables DPMS (display power management services). The default state +is platform and configuration specific. +.TP 8 +.BI \-extension extensionName +disables named extension. If an unknown extension name is specified, +a list of accepted extension names is printed. +.TP 8 +.BI \+extension extensionName +enables named extension. If an unknown extension name is specified, +a list of accepted extension names is printed. +.TP 8 +.B \-f \fIvolume\fP +sets feep (bell) volume (allowable range: 0-100). +.TP 8 +.B \-fc \fIcursorFont\fP +sets default cursor font. +.TP 8 +.B \-fn \fIfont\fP +sets the default font. +.TP 8 +.B \-fp \fIfontPath\fP +sets the search path for fonts. This path is a comma separated list +of directories which the X server searches for font databases. +See the FONTS section of this manual page for more information and the default +list. +.TP 8 +.B \-help +prints a usage message. +.TP 8 +.B \-I +causes all remaining command line arguments to be ignored. +.TP 8 +.B \-maxbigreqsize \fIsize\fP +sets the maximum big request to +.I size +MB. +.TP 8 +.B \-nocursor +disable the display of the pointer cursor. +.TP 8 +.B \-nolisten \fItrans-type\fP +disables a transport type. For example, TCP/IP connections can be disabled +with +.BR "\-nolisten tcp" . +This option may be issued multiple times to disable listening to different +transport types. +.TP 8 +.B \-noreset +prevents a server reset when the last client connection is closed. This +overrides a previous +.B \-terminate +command line option. +.TP 8 +.B \-p \fIminutes\fP +sets screen-saver pattern cycle time in minutes. +.TP 8 +.B \-pn +permits the server to continue running if it fails to establish all of +its well-known sockets (connection points for clients), but +establishes at least one. This option is set by default. +.TP 8 +.B \-nopn +causes the server to exit if it fails to establish all of its well-known +sockets (connection points for clients). +.TP 8 +.B \-r +turns off auto-repeat. +.TP 8 +.B r +turns on auto-repeat. +.TP 8 +.B -retro +starts the stipple with the classic stipple and cursor visible. The default +is to start with a black root window, and to suppress display of the cursor +until the first time an application calls XDefineCursor(). For the Xorg +server, this also sets the default for the DontZap option to FALSE. For +kdrive servers, this implies -zap. +.TP 8 +.B \-s \fIminutes\fP +sets screen-saver timeout time in minutes. +.TP 8 +.B \-su +disables save under support on all screens. +.TP 8 +.B \-t \fInumber\fP +sets pointer acceleration threshold in pixels (i.e. after how many pixels +pointer acceleration should take effect). +.TP 8 +.B \-terminate +causes the server to terminate at server reset, instead of continuing to run. +This overrides a previous +.B \-noreset +command line option. +.TP 8 +.B \-to \fIseconds\fP +sets default connection timeout in seconds. +.TP 8 +.B \-tst +disables all testing extensions (e.g., XTEST, XTrap, XTestExtension1, RECORD). +.TP 8 +.B tty\fIxx\fP +ignored, for servers started the ancient way (from init). +.TP 8 +.B v +sets video-off screen-saver preference. +.TP 8 +.B \-v +sets video-on screen-saver preference. +.TP 8 +.B \-wm +forces the default backing-store of all windows to be WhenMapped. This +is a backdoor way of getting backing-store to apply to all windows. +Although all mapped windows will have backing store, the backing store +attribute value reported by the server for a window will be the last +value established by a client. If it has never been set by a client, +the server will report the default value, NotUseful. This behavior is +required by the X protocol, which allows the server to exceed the +client's backing store expectations but does not provide a way to tell +the client that it is doing so. +.TP 8 +.B \-wr +sets the default root window to solid white instead of the standard root weave +pattern. +.TP 8 +.B \-x \fIextension\fP +loads the specified extension at init. +This is a no-op for most implementations. +.TP 8 +.B [+-]xinerama +enables(+) or disables(-) the XINERAMA extension. The default state is +platform and configuration specific. +.SH SERVER DEPENDENT OPTIONS +Some X servers accept the following options: +.TP 8 +.B \-ld \fIkilobytes\fP +sets the data space limit of the server to the specified number of kilobytes. +A value of zero makes the data size as large as possible. The default value +of \-1 leaves the data space limit unchanged. +.TP 8 +.B \-lf \fIfiles\fP +sets the number-of-open-files limit of the server to the specified number. +A value of zero makes the limit as large as possible. The default value +of \-1 leaves the limit unchanged. +.TP 8 +.B \-ls \fIkilobytes\fP +sets the stack space limit of the server to the specified number of kilobytes. +A value of zero makes the stack size as large as possible. The default value +of \-1 leaves the stack space limit unchanged. +.TP 8 +.B \-logo +turns on the X Window System logo display in the screen-saver. +There is currently no way to change this from a client. +.TP 8 +.B nologo +turns off the X Window System logo display in the screen-saver. +There is currently no way to change this from a client. +.TP 8 +.B \-render +.BR default | mono | gray | color +sets the color allocation policy that will be used by the render extension. +.RS 8 +.TP 8 +.I default +selects the default policy defined for the display depth of the X +server. +.TP 8 +.I mono +don't use any color cell. +.TP 8 +.I gray +use a gray map of 13 color cells for the X render extension. +.TP 8 +.I color +use a color cube of at most 4*4*4 colors (that is 64 color cells). +.RE +.TP 8 +.B \-dumbSched +disables smart scheduling on platforms that support the smart scheduler. +.TP +.B \-schedInterval \fIinterval\fP +sets the smart scheduler's scheduling interval to +.I interval +milliseconds. +.SH XDMCP OPTIONS +X servers that support XDMCP have the following options. +See the \fIX Display Manager Control Protocol\fP specification for more +information. +.TP 8 +.B \-query \fIhostname\fP +enables XDMCP and sends Query packets to the specified +.IR hostname . +.TP 8 +.B \-broadcast +enable XDMCP and broadcasts BroadcastQuery packets to the network. The +first responding display manager will be chosen for the session. +.TP 8 +.B \-multicast [\fIaddress\fP [\fIhop count\fP]] +Enable XDMCP and multicast BroadcastQuery packets to the network. +The first responding display manager is chosen for the session. If an +address is specified, the multicast is sent to that address. If no +address is specified, the multicast is sent to the default XDMCP IPv6 +multicast group. If a hop count is specified, it is used as the maximum +hop count for the multicast. If no hop count is specified, the multicast +is set to a maximum of 1 hop, to prevent the multicast from being routed +beyond the local network. +.TP 8 +.B \-indirect \fIhostname\fP +enables XDMCP and send IndirectQuery packets to the specified +.IR hostname . +.TP 8 +.B \-port \fIport-number\fP +uses the specified \fIport-number\fP for XDMCP packets, instead of the +default. This option must be specified before any \-query, \-broadcast, +\-multicast, or \-indirect options. +.TP 8 +.B \-from \fIlocal-address\fP +specifies the local address to connect from (useful if the connecting host +has multiple network interfaces). The \fIlocal-address\fP may be expressed +in any form acceptable to the host platform's \fIgethostbyname\fP(3) +implementation. +.TP 8 +.B \-once +causes the server to terminate (rather than reset) when the XDMCP session +ends. +.TP 8 +.B \-class \fIdisplay-class\fP +XDMCP has an additional display qualifier used in resource lookup for +display-specific options. This option sets that value, by default it +is "MIT-Unspecified" (not a very useful value). +.TP 8 +.B \-cookie \fIxdm-auth-bits\fP +When testing XDM-AUTHENTICATION-1, a private key is shared between the +server and the manager. This option sets the value of that private +data (not that it is very private, being on the command line!). +.TP 8 +.B \-displayID \fIdisplay-id\fP +Yet another XDMCP specific value, this one allows the display manager to +identify each display so that it can locate the shared key. +.SH XKEYBOARD OPTIONS +X servers that support the XKEYBOARD (a.k.a. \*qXKB\*q) extension accept the +following options. All layout files specified on the command line must be +located in the XKB base directory or a subdirectory, and specified as the +relative path from the XKB base directory. The default XKB base directory is +.IR __projectroot__/lib/X11/xkb . +.TP 8 +.BR [+-]accessx " [ \fItimeout\fP [ \fItimeout_mask\fP [ \fIfeedback\fP [ \fIoptions_mask\fP ] ] ] ]" +enables(+) or disables(-) AccessX key sequences. +.TP 8 +.B \-xkbdir \fIdirectory\fP +base directory for keyboard layout files. This option is not available +for setuid X servers (i.e., when the X server's real and effective uids +are different). +.TP 8 +.B \-ardelay \fImilliseconds\fP +sets the autorepeat delay (length of time in milliseconds that a key must +be depressed before autorepeat starts). +.TP 8 +.B \-arinterval \fImilliseconds\fP +sets the autorepeat interval (length of time in milliseconds that should +elapse between autorepeat-generated keystrokes). +.TP 8 +.B \-xkbmap \fIfilename\fP +loads keyboard description in \fIfilename\fP on server startup. +.SH "NETWORK CONNECTIONS" +The X server supports client connections via a platform-dependent subset of +the following transport types: TCP\/IP, Unix Domain sockets, DECnet, +and several varieties of SVR4 local connections. See the DISPLAY +NAMES section of the \fIX\fP(__miscmansuffix__) manual page to learn how to +specify which transport type clients should try to use. +.SH GRANTING ACCESS +The X server implements a platform-dependent subset of the following +authorization protocols: MIT-MAGIC-COOKIE-1, XDM-AUTHORIZATION-1, +XDM-AUTHORIZATION-2, SUN-DES-1, and MIT-KERBEROS-5. See the +\fIXsecurity\fP(__miscmansuffix__) manual page for information on the +operation of these protocols. +.PP +Authorization data required by the above protocols is passed to the +server in a private file named with the \fB\-auth\fP command line +option. Each time the server is about to accept the first connection +after a reset (or when the server is starting), it reads this file. +If this file contains any authorization records, the local host is not +automatically allowed access to the server, and only clients which +send one of the authorization records contained in the file in the +connection setup information will be allowed access. See the +\fIXau\fP manual page for a description of the binary format of this +file. See \fIxauth\fP(1) for maintenance of this file, and distribution +of its contents to remote hosts. +.PP +The X server also uses a host-based access control list for deciding +whether or not to accept connections from clients on a particular machine. +If no other authorization mechanism is being used, +this list initially consists of the host on which the server is running as +well as any machines listed in the file \fI/etc/X\fBn\fI.hosts\fR, where +\fBn\fP is the display number of the server. Each line of the file should +contain either an Internet hostname (e.g. expo.lcs.mit.edu) or a DECnet +hostname in double colon format (e.g. hydra::) or a complete name in the format +\fIfamily\fP:\fIname\fP as described in the \fIxhost\fP(1) manual page. +There should be no leading or trailing spaces on any lines. For example: +.sp +.in +8 +.nf +joesworkstation +corporate.company.com +star:: +inet:bigcpu +local: +.fi +.in -8 +.PP +Users can add or remove hosts from this list and enable or disable access +control using the \fIxhost\fP command from the same machine as the server. +.PP +If the X FireWall Proxy (\fIxfwp\fP) is being used without a sitepolicy, +host-based authorization must be turned on for clients to be able to +connect to the X server via the \fIxfwp\fP. If \fIxfwp\fP is run without +a configuration file and thus no sitepolicy is defined, if \fIxfwp\fP +is using an X server where xhost + has been run to turn off host-based +authorization checks, when a client tries to connect to this X server +via \fIxfwp\fP, the X server will deny the connection. See \fIxfwp\fP(1) +for more information about this proxy. +.PP +The X protocol intrinsically does not have any notion of window operation +permissions or place any restrictions on what a client can do; if a program can +connect to a display, it has full run of the screen. +X servers that support the SECURITY extension fare better because clients +can be designated untrusted via the authorization they use to connect; see +the \fIxauth\fP(1) manual page for details. Restrictions are imposed +on untrusted clients that curtail the mischief they can do. See the SECURITY +extension specification for a complete list of these restrictions. +.PP +Sites that have better +authentication and authorization systems might wish to make +use of the hooks in the libraries and the server to provide additional +security models. +.SH SIGNALS +The X server attaches special meaning to the following signals: +.TP 8 +.I SIGHUP +This signal causes the server to close all existing connections, free all +resources, and restore all defaults. It is sent by the display manager +whenever the main user's main application (usually an \fIxterm\fP or window +manager) exits to force the server to clean up and prepare for the next +user. +.TP 8 +.I SIGTERM +This signal causes the server to exit cleanly. +.TP 8 +.I SIGUSR1 +This signal is used quite differently from either of the above. When the +server starts, it checks to see if it has inherited SIGUSR1 as SIG_IGN +instead of the usual SIG_DFL. In this case, the server sends a SIGUSR1 to +its parent process after it has set up the various connection schemes. +\fIXdm\fP uses this feature to recognize when connecting to the server +is possible. +.SH FONTS +The X server can obtain fonts from directories and/or from font servers. +The list of directories and font servers +the X server uses when trying to open a font is controlled +by the \fIfont path\fP. +.LP +The default font path is +__default_font_path__ . +.LP +A special kind of directory can be specified using the \fBcatalogue\fP: +prefix. Directories specified this way can contain symlinks pointing to the +real font directories. See the FONTPATH.D section for details. +.LP +The font path can be set with the \fB\-fp\fP option or by \fIxset\fP(1) +after the server has started. +.SH "FONTPATH.D" +You can specify a special kind of font path in the form \fBcatalogue:\fR. +The directory specified after the catalogue: prefix will be scanned for symlinks +and each symlink destination will be added as a local fontfile FPE. +.PP +The symlink can be suffixed by attributes such as '\fBunscaled\fR', which +will be passed through to the underlying fontfile FPE. The only exception is +the newly introduced '\fBpri\fR' attribute, which will be used for ordering +the font paths specified by the symlinks. + +An example configuration: + +.nf + 75dpi:unscaled:pri=20 \-> /usr/share/X11/fonts/75dpi + ghostscript:pri=60 \-> /usr/share/fonts/default/ghostscript + misc:unscaled:pri=10 \-> /usr/share/X11/fonts/misc + type1:pri=40 \-> /usr/share/X11/fonts/Type1 + type1:pri=50 \-> /usr/share/fonts/default/Type1 +.fi + +This will add /usr/share/X11/fonts/misc as the first FPE with the attribute +'unscaled', second FPE will be /usr/share/X11/fonts/75dpi, also with +the attribute unscaled etc. This is functionally equivalent to setting +the following font path: + +.nf + /usr/share/X11/fonts/misc:unscaled, + /usr/share/X11/fonts/75dpi:unscaled, + /usr/share/X11/fonts/Type1, + /usr/share/fonts/default/Type1, + /usr/share/fonts/default/ghostscript +.fi + +.SH FILES +.TP 30 +.I /etc/X\fBn\fP.hosts +Initial access control list for display number \fBn\fP +.TP 30 +.IR __datadir__/fonts/X11/misc , __datadir__/fonts/X11/75dpi , __datadir__/fonts/X11/100dpi +Bitmap font directories +.TP 30 +.IR __datadir__/fonts/X11/TTF , __datadir__/fonts/X11/Type1 +Outline font directories +.TP 30 +.I /tmp/.X11-unix/X\fBn\fP +Unix domain socket for display number \fBn\fP +.TP 30 +.I /usr/adm/X\fBn\fPmsgs +Error log file for display number \fBn\fP if run from \fIinit\fP(__adminmansuffix__) +.TP 30 +.I __projectroot__/lib/X11/xdm/xdm-errors +Default error log file if the server is run from \fIxdm\fP(1) +.SH "SEE ALSO" +General information: \fIX\fP(__miscmansuffix__) +.PP +Protocols: +.I "X Window System Protocol," +.I "The X Font Service Protocol," +.I "X Display Manager Control Protocol" +.PP +Fonts: \fIbdftopcf\fP(1), \fImkfontdir\fP(1), \fImkfontscale\fP(1), +\fIxfs\fP(1), \fIxlsfonts\fP(1), \fIxfontsel\fP(1), \fIxfd\fP(1), +.I "X Logical Font Description Conventions" +.PP +Security: \fIXsecurity\fP(__miscmansuffix__), \fIxauth\fP(1), \fIXau\fP(1), +\fIxdm\fP(1), \fIxhost\fP(1), \fIxfwp\fP(1), +.I "Security Extension Specification" +.PP +Starting the server: \fIstartx\fP(1), \fIxdm\fP(1), \fIxinit\fP(1) +.PP +Controlling the server once started: \fIxset\fP(1), \fIxsetroot\fP(1), +\fIxhost\fP(1), \fIxinput\fP(1), \fIxrandr\fP(1) +.PP +Server-specific man pages: +\fIXorg\fP(1), \fIXdmx\fP(1), \fIXephyr\fP(1), \fIXnest\fP(1), +\fIXvfb\fP(1), \fIXquartz\fP(1), \fIXWin\fP(1). +.PP +Server internal documentation: +.I "Definition of the Porting Layer for the X v11 Sample Server" +.SH AUTHORS +The sample server was originally written by Susan Angebranndt, Raymond +Drewry, Philip Karlton, and Todd Newman, from Digital Equipment +Corporation, with support from a large cast. It has since been +extensively rewritten by Keith Packard and Bob Scheifler, from MIT. +Dave Wiggins took over post-R5 and made substantial improvements. diff --git a/xorg-server/hw/vfb/InitInput.c b/xorg-server/hw/vfb/InitInput.c index 10bb6a599..64040c865 100644 --- a/xorg-server/hw/vfb/InitInput.c +++ b/xorg-server/hw/vfb/InitInput.c @@ -1,155 +1,153 @@ -/* - -Copyright 1993, 1998 The Open Group - -Permission to use, copy, modify, distribute, and sell this software and its -documentation for any purpose is hereby granted without fee, provided that -the above copyright notice appear in all copies and that both that -copyright notice and this permission notice appear in supporting -documentation. - -The above copyright notice and this permission notice shall be included -in all copies or substantial portions of the Software. - -THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS -OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF -MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. -IN NO EVENT SHALL THE OPEN GROUP BE LIABLE FOR ANY CLAIM, DAMAGES OR -OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, -ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR -OTHER DEALINGS IN THE SOFTWARE. - -Except as contained in this notice, the name of The Open Group shall -not be used in advertising or otherwise to promote the sale, use or -other dealings in this Software without prior written authorization -from The Open Group. - -*/ - -#ifdef HAVE_DIX_CONFIG_H -#include -#endif - -#include -#include "mi.h" -#include -#include "scrnintstr.h" -#include "inputstr.h" -#include -#include "mibstore.h" -#include "mipointer.h" -#include "lk201kbd.h" -#include "xkbsrv.h" -#include -#include "xserver-properties.h" -#include "exevents.h" -#include "extinit.h" - -Bool -LegalModifier(unsigned int key, DeviceIntPtr pDev) -{ - return TRUE; -} - -void -ProcessInputEvents(void) -{ - mieqProcessInputEvents(); -} - -void DDXRingBell(int volume, int pitch, int duration) -{ -} - -#define VFB_MIN_KEY 8 -#define VFB_MAX_KEY 255 -KeySym map[MAP_LENGTH * LK201_GLYPHS_PER_KEY]; - -static int -vfbKeybdProc(DeviceIntPtr pDevice, int onoff) -{ - DevicePtr pDev = (DevicePtr)pDevice; - - switch (onoff) - { - case DEVICE_INIT: - InitKeyboardDeviceStruct(pDevice, NULL, NULL, NULL); - break; - case DEVICE_ON: - pDev->on = TRUE; - break; - case DEVICE_OFF: - pDev->on = FALSE; - break; - case DEVICE_CLOSE: - break; - } - return Success; -} - -static int -vfbMouseProc(DeviceIntPtr pDevice, int onoff) -{ -#define NBUTTONS 3 -#define NAXES 2 - - BYTE map[NBUTTONS + 1]; - DevicePtr pDev = (DevicePtr)pDevice; - Atom btn_labels[NBUTTONS] = {0}; - Atom axes_labels[NAXES] = {0}; - - switch (onoff) - { - case DEVICE_INIT: - map[1] = 1; - map[2] = 2; - map[3] = 3; - - btn_labels[0] = XIGetKnownProperty(BTN_LABEL_PROP_BTN_LEFT); - btn_labels[1] = XIGetKnownProperty(BTN_LABEL_PROP_BTN_MIDDLE); - btn_labels[2] = XIGetKnownProperty(BTN_LABEL_PROP_BTN_RIGHT); - - axes_labels[0] = XIGetKnownProperty(AXIS_LABEL_PROP_REL_X); - axes_labels[1] = XIGetKnownProperty(AXIS_LABEL_PROP_REL_Y); - - InitPointerDeviceStruct(pDev, map, NBUTTONS, btn_labels, - (PtrCtrlProcPtr)NoopDDA, GetMotionHistorySize(), NAXES, axes_labels); - break; - - case DEVICE_ON: - pDev->on = TRUE; - break; - - case DEVICE_OFF: - pDev->on = FALSE; - break; - - case DEVICE_CLOSE: - break; - } - return Success; - -#undef NBUTTONS -#undef NAXES -} - -void -InitInput(int argc, char *argv[]) -{ - DeviceIntPtr p, k; - Atom xiclass; - p = AddInputDevice(serverClient, vfbMouseProc, TRUE); - k = AddInputDevice(serverClient, vfbKeybdProc, TRUE); - RegisterPointerDevice(p); - xiclass = MakeAtom(XI_MOUSE, sizeof(XI_MOUSE) - 1, TRUE); - AssignTypeAndName(p, xiclass, "Xvfb mouse"); - RegisterKeyboardDevice(k); - xiclass = MakeAtom(XI_KEYBOARD, sizeof(XI_KEYBOARD) - 1, TRUE); - AssignTypeAndName(k, xiclass, "Xvfb keyboard"); - (void)mieqInit(); -} - -void -CloseInput (void) -{ -} +/* + +Copyright 1993, 1998 The Open Group + +Permission to use, copy, modify, distribute, and sell this software and its +documentation for any purpose is hereby granted without fee, provided that +the above copyright notice appear in all copies and that both that +copyright notice and this permission notice appear in supporting +documentation. + +The above copyright notice and this permission notice shall be included +in all copies or substantial portions of the Software. + +THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS +OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF +MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. +IN NO EVENT SHALL THE OPEN GROUP BE LIABLE FOR ANY CLAIM, DAMAGES OR +OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, +ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR +OTHER DEALINGS IN THE SOFTWARE. + +Except as contained in this notice, the name of The Open Group shall +not be used in advertising or otherwise to promote the sale, use or +other dealings in this Software without prior written authorization +from The Open Group. + +*/ + +#ifdef HAVE_DIX_CONFIG_H +#include +#endif + +#include +#include "mi.h" +#include +#include "scrnintstr.h" +#include "inputstr.h" +#include +#include "mibstore.h" +#include "mipointer.h" +#include "xkbsrv.h" +#include +#include "xserver-properties.h" +#include "exevents.h" +#include "extinit.h" + +Bool +LegalModifier(unsigned int key, DeviceIntPtr pDev) +{ + return TRUE; +} + +void +ProcessInputEvents(void) +{ + mieqProcessInputEvents(); +} + +void DDXRingBell(int volume, int pitch, int duration) +{ +} + +#define VFB_MIN_KEY 8 +#define VFB_MAX_KEY 255 + +static int +vfbKeybdProc(DeviceIntPtr pDevice, int onoff) +{ + DevicePtr pDev = (DevicePtr)pDevice; + + switch (onoff) + { + case DEVICE_INIT: + InitKeyboardDeviceStruct(pDevice, NULL, NULL, NULL); + break; + case DEVICE_ON: + pDev->on = TRUE; + break; + case DEVICE_OFF: + pDev->on = FALSE; + break; + case DEVICE_CLOSE: + break; + } + return Success; +} + +static int +vfbMouseProc(DeviceIntPtr pDevice, int onoff) +{ +#define NBUTTONS 3 +#define NAXES 2 + + BYTE map[NBUTTONS + 1]; + DevicePtr pDev = (DevicePtr)pDevice; + Atom btn_labels[NBUTTONS] = {0}; + Atom axes_labels[NAXES] = {0}; + + switch (onoff) + { + case DEVICE_INIT: + map[1] = 1; + map[2] = 2; + map[3] = 3; + + btn_labels[0] = XIGetKnownProperty(BTN_LABEL_PROP_BTN_LEFT); + btn_labels[1] = XIGetKnownProperty(BTN_LABEL_PROP_BTN_MIDDLE); + btn_labels[2] = XIGetKnownProperty(BTN_LABEL_PROP_BTN_RIGHT); + + axes_labels[0] = XIGetKnownProperty(AXIS_LABEL_PROP_REL_X); + axes_labels[1] = XIGetKnownProperty(AXIS_LABEL_PROP_REL_Y); + + InitPointerDeviceStruct(pDev, map, NBUTTONS, btn_labels, + (PtrCtrlProcPtr)NoopDDA, GetMotionHistorySize(), NAXES, axes_labels); + break; + + case DEVICE_ON: + pDev->on = TRUE; + break; + + case DEVICE_OFF: + pDev->on = FALSE; + break; + + case DEVICE_CLOSE: + break; + } + return Success; + +#undef NBUTTONS +#undef NAXES +} + +void +InitInput(int argc, char *argv[]) +{ + DeviceIntPtr p, k; + Atom xiclass; + p = AddInputDevice(serverClient, vfbMouseProc, TRUE); + k = AddInputDevice(serverClient, vfbKeybdProc, TRUE); + RegisterPointerDevice(p); + xiclass = MakeAtom(XI_MOUSE, sizeof(XI_MOUSE) - 1, TRUE); + AssignTypeAndName(p, xiclass, "Xvfb mouse"); + RegisterKeyboardDevice(k); + xiclass = MakeAtom(XI_KEYBOARD, sizeof(XI_KEYBOARD) - 1, TRUE); + AssignTypeAndName(k, xiclass, "Xvfb keyboard"); + (void)mieqInit(); +} + +void +CloseInput (void) +{ +} diff --git a/xorg-server/hw/vfb/Makefile.am b/xorg-server/hw/vfb/Makefile.am index 4ac0c8f89..f7a8c24af 100644 --- a/xorg-server/hw/vfb/Makefile.am +++ b/xorg-server/hw/vfb/Makefile.am @@ -1,52 +1,51 @@ -bin_PROGRAMS = Xvfb -noinst_LIBRARIES = libfbcmap.a - -AM_CFLAGS = -DHAVE_DIX_CONFIG_H \ - -DNO_HW_ONLY_EXTS \ - -DNO_MODULE_EXTS \ - $(XVFBMODULES_CFLAGS) \ - $(DIX_CFLAGS) - -SRCS = InitInput.c \ - InitOutput.c \ - lk201kbd.h \ - $(top_srcdir)/Xext/dpmsstubs.c \ - $(top_srcdir)/Xi/stubs.c \ - $(top_srcdir)/mi/miinitext.c - -libfbcmap_a_CFLAGS = $(AM_CFLAGS) -libfbcmap_a_SOURCES = $(top_srcdir)/fb/fbcmap_mi.c - -Xvfb_SOURCES = $(SRCS) - -XVFB_LIBS = \ - @XVFB_LIBS@ \ - libfbcmap.a \ - $(MAIN_LIB) \ - $(XSERVER_LIBS) - -Xvfb_LDADD = $(XVFB_LIBS) $(XVFB_SYS_LIBS) $(XSERVER_SYS_LIBS) -Xvfb_DEPENDENCIES = $(XVFB_LIBS) -Xvfb_LDFLAGS = $(LD_EXPORT_SYMBOLS_FLAG) - -# Man page -include $(top_srcdir)/cpprules.in - -appmandir = $(APP_MAN_DIR) - -appman_PRE = Xvfb.man -appman_DATA = $(appman_PRE:man=@APP_MAN_SUFFIX@) - -BUILT_SOURCES = $(appman_PRE) -CLEANFILES = $(appman_PRE) $(appman_DATA) - -SUFFIXES += .$(APP_MAN_SUFFIX) .man - -.man.$(APP_MAN_SUFFIX): - -$(AM_V_at)rm -f $@ - $(AM_V_at)$(LN_S) $< $@ - -EXTRA_DIST = Xvfb.man.pre - -relink: - $(AM_V_at)rm -f Xvfb$(EXEEXT) && $(MAKE) Xvfb$(EXEEXT) +bin_PROGRAMS = Xvfb +noinst_LIBRARIES = libfbcmap.a + +AM_CFLAGS = -DHAVE_DIX_CONFIG_H \ + -DNO_HW_ONLY_EXTS \ + -DNO_MODULE_EXTS \ + $(XVFBMODULES_CFLAGS) \ + $(DIX_CFLAGS) + +SRCS = InitInput.c \ + InitOutput.c \ + $(top_srcdir)/Xext/dpmsstubs.c \ + $(top_srcdir)/Xi/stubs.c \ + $(top_srcdir)/mi/miinitext.c + +libfbcmap_a_CFLAGS = $(AM_CFLAGS) +libfbcmap_a_SOURCES = $(top_srcdir)/fb/fbcmap_mi.c + +Xvfb_SOURCES = $(SRCS) + +XVFB_LIBS = \ + @XVFB_LIBS@ \ + libfbcmap.a \ + $(MAIN_LIB) \ + $(XSERVER_LIBS) + +Xvfb_LDADD = $(XVFB_LIBS) $(XVFB_SYS_LIBS) $(XSERVER_SYS_LIBS) +Xvfb_DEPENDENCIES = $(XVFB_LIBS) +Xvfb_LDFLAGS = $(LD_EXPORT_SYMBOLS_FLAG) + +# Man page +include $(top_srcdir)/cpprules.in + +appmandir = $(APP_MAN_DIR) + +appman_PRE = Xvfb.man +appman_DATA = $(appman_PRE:man=@APP_MAN_SUFFIX@) + +BUILT_SOURCES = $(appman_PRE) +CLEANFILES = $(appman_PRE) $(appman_DATA) + +SUFFIXES += .$(APP_MAN_SUFFIX) .man + +.man.$(APP_MAN_SUFFIX): + -$(AM_V_at)rm -f $@ + $(AM_V_at)$(LN_S) $< $@ + +EXTRA_DIST = Xvfb.man.pre + +relink: + $(AM_V_at)rm -f Xvfb$(EXEEXT) && $(MAKE) Xvfb$(EXEEXT) diff --git a/xorg-server/hw/vfb/lk201kbd.h b/xorg-server/hw/vfb/lk201kbd.h deleted file mode 100644 index d0198d06b..000000000 --- a/xorg-server/hw/vfb/lk201kbd.h +++ /dev/null @@ -1,158 +0,0 @@ -/*********************************************************** - -Copyright 1987, 1998 The Open Group - -Permission to use, copy, modify, distribute, and sell this software and its -documentation for any purpose is hereby granted without fee, provided that -the above copyright notice appear in all copies and that both that -copyright notice and this permission notice appear in supporting -documentation. - -The above copyright notice and this permission notice shall be included in -all copies or substantial portions of the Software. - -THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR -IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, -FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE -OPEN GROUP BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN -AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN -CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. - -Except as contained in this notice, the name of The Open Group shall not be -used in advertising or otherwise to promote the sale, use or other dealings -in this Software without prior written authorization from The Open Group. - - -Copyright 1987 by Digital Equipment Corporation, Maynard, Massachusetts. - - All Rights Reserved - -Permission to use, copy, modify, and distribute this software and its -documentation for any purpose and without fee is hereby granted, -provided that the above copyright notice appear in all copies and that -both that copyright notice and this permission notice appear in -supporting documentation, and that the name of Digital not be -used in advertising or publicity pertaining to distribution of the -software without specific, written prior permission. - -DIGITAL DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE, INCLUDING -ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO EVENT SHALL -DIGITAL BE LIABLE FOR ANY SPECIAL, INDIRECT OR CONSEQUENTIAL DAMAGES OR -ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, -WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, -ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS -SOFTWARE. - -******************************************************************/ - - -#define MIN_LK201_KEY 86 -#define MAX_LK201_KEY 251 -#define LK201_GLYPHS_PER_KEY 2 - -#define KEY_F1 86 -#define KEY_F2 87 -#define KEY_F3 88 -#define KEY_F4 89 -#define KEY_F5 90 -#define KEY_F6 100 -#define KEY_F7 101 -#define KEY_F8 102 -#define KEY_F9 103 -#define KEY_F10 104 -#define KEY_F11 113 -#define KEY_F12 114 -#define KEY_F13 115 -#define KEY_F14 116 -#define KEY_HELP 124 -#define KEY_MENU 125 -#define KEY_F17 128 -#define KEY_F18 129 -#define KEY_F19 130 -#define KEY_F20 131 -#define KEY_FIND 138 -#define KEY_INSERT_HERE 139 -#define KEY_REMOVE 140 -#define KEY_SELECT 141 -#define KEY_PREV_SCREEN 142 -#define KEY_NEXT_SCREEN 143 -#define KEY_KP_0 146 /* key pad */ -#define KEY_KP_PERIOD 148 /* key pad */ -#define KEY_KP_ENTER 149 /* key pad */ -#define KEY_KP_1 150 /* key pad */ -#define KEY_KP_2 151 /* key pad */ -#define KEY_KP_3 152 /* key pad */ -#define KEY_KP_4 153 /* key pad */ -#define KEY_KP_5 154 /* key pad */ -#define KEY_KP_6 155 /* key pad */ -#define KEY_KP_COMMA 156 /* key pad */ -#define KEY_KP_7 157 /* key pad */ -#define KEY_KP_8 158 /* key pad */ -#define KEY_KP_9 159 /* key pad */ -#define KEY_KP_HYPHEN 160 -#define KEY_KP_PF1 161 -#define KEY_KP_PF2 162 -#define KEY_KP_PF3 163 -#define KEY_KP_PF4 164 -#define KEY_LEFT 167 -#define KEY_RIGHT 168 -#define KEY_DOWN 169 -#define KEY_UP 170 -#define KEY_SHIFT 174 -#define KEY_CTRL 175 -#define KEY_LOCK 176 -#define KEY_COMPOSE 177 -#define KEY_APPLE 177 -#define KEY_META 177 -#define KEY_DELETE 188 -#define KEY_RETURN 189 -#define KEY_TAB 190 -#define KEY_TILDE 191 -#define KEY_TR_1 192 /* Top Row */ -#define KEY_Q 193 -#define KEY_A 194 -#define KEY_Z 195 -#define KEY_TR_2 197 -#define KEY_W 198 -#define KEY_S 199 -#define KEY_X 200 -#define KEY_LANGLE_RANGLE 201 /* xxx */ -#define KEY_TR_3 203 -#define KEY_E 204 -#define KEY_D 205 -#define KEY_C 206 -#define KEY_TR_4 208 -#define KEY_R 209 -#define KEY_F 210 -#define KEY_V 211 -#define KEY_SPACE 212 -#define KEY_TR_5 214 -#define KEY_T 215 -#define KEY_G 216 -#define KEY_B 217 -#define KEY_TR_6 219 -#define KEY_Y 220 -#define KEY_H 221 -#define KEY_N 222 -#define KEY_TR_7 224 -#define KEY_U 225 -#define KEY_J 226 -#define KEY_M 227 -#define KEY_TR_8 229 -#define KEY_I 230 -#define KEY_K 231 -#define KEY_COMMA 232 /* xxx */ -#define KEY_TR_9 234 -#define KEY_O 235 -#define KEY_L 236 -#define KEY_PERIOD 237 /* xxx */ -#define KEY_TR_0 239 -#define KEY_P 240 -#define KEY_SEMICOLON 242 /* xxx */ -#define KEY_QMARK 243 -#define KEY_PLUS 245 /* xxx */ -#define KEY_RBRACE 246 -#define KEY_VBAR 247 /* xxx */ -#define KEY_UBAR 249 /* xxx */ -#define KEY_LBRACE 250 -#define KEY_QUOTE 251 diff --git a/xorg-server/hw/xfree86/os-support/solaris/sun_init.c b/xorg-server/hw/xfree86/os-support/solaris/sun_init.c index 82df2e9dd..4716da93e 100644 --- a/xorg-server/hw/xfree86/os-support/solaris/sun_init.c +++ b/xorg-server/hw/xfree86/os-support/solaris/sun_init.c @@ -33,8 +33,21 @@ # include #endif +/* + * Applications see VT number as consecutive integers starting from 1. + * VT number VT device + * ------------------------------------------------------- + * 1 : /dev/vt/0 (Alt + Ctrl + F1) + * 2 : /dev/vt/2 (Alt + Ctrl + F2) + * 3 : /dev/vt/3 (Alt + Ctrl + F3) + * ... ... + */ +#define CONSOLE_VTNO 1 +#define SOL_CONSOLE_DEV "/dev/console" + static Bool KeepTty = FALSE; static Bool Protect0 = FALSE; +static Bool UseConsole = FALSE; #ifdef HAS_USL_VTS static int VTnum = -1; static int xf86StartVT = -1; @@ -112,8 +125,30 @@ xf86OpenConsole(void) vtEnabled = 0; } } +#endif /* HAS_USL_VTS */ + if (UseConsole) + { + strlcpy(consoleDev, SOL_CONSOLE_DEV, sizeof(consoleDev)); + +#ifdef HAS_USL_VTS + xf86Info.vtno = CONSOLE_VTNO; + if (vtEnabled == 0) + { + xf86StartVT = 0; + } + else + { + if (ioctl(fd, VT_GETSTATE, &vtinfo) < 0) + FatalError("xf86OpenConsole: Cannot determine current VT\n"); + xf86StartVT = vtinfo.v_active; + } +#endif /* HAS_USL_VTS */ + goto OPENCONSOLE; + } + +#ifdef HAS_USL_VTS if (vtEnabled == 0) { /* VT not enabled - kernel too old or Sparc platforms @@ -123,32 +158,31 @@ xf86OpenConsole(void) xf86StartVT = 0; xf86Info.vtno = 0; strlcpy(consoleDev, xf86SolarisFbDev, sizeof(consoleDev)); + goto OPENCONSOLE; } - else - { - if (ioctl(fd, VT_GETSTATE, &vtinfo) < 0) - FatalError("xf86OpenConsole: Cannot determine current VT\n"); - xf86StartVT = vtinfo.v_active; + if (ioctl(fd, VT_GETSTATE, &vtinfo) < 0) + FatalError("xf86OpenConsole: Cannot determine current VT\n"); - if (VTnum != -1) - { - xf86Info.vtno = VTnum; - from = X_CMDLINE; - } - else + xf86StartVT = vtinfo.v_active; + + if (VTnum != -1) + { + xf86Info.vtno = VTnum; + from = X_CMDLINE; + } + else + { + if ((ioctl(fd, VT_OPENQRY, &xf86Info.vtno) < 0) || + (xf86Info.vtno == -1)) { - if ((ioctl(fd, VT_OPENQRY, &xf86Info.vtno) < 0) || - (xf86Info.vtno == -1)) - { - FatalError("xf86OpenConsole: Cannot find a free VT\n"); - } + FatalError("xf86OpenConsole: Cannot find a free VT\n"); } - - xf86Msg(from, "using VT number %d\n\n", xf86Info.vtno); - snprintf(consoleDev, PATH_MAX, "/dev/vt/%d", xf86Info.vtno); } + xf86Msg(from, "using VT number %d\n\n", xf86Info.vtno); + snprintf(consoleDev, PATH_MAX, "/dev/vt/%d", xf86Info.vtno); + if (fd != -1) { close(fd); @@ -156,6 +190,7 @@ xf86OpenConsole(void) #endif /* HAS_USL_VTS */ +OPENCONSOLE: if (!KeepTty) setpgrp(); @@ -163,11 +198,10 @@ xf86OpenConsole(void) FatalError("xf86OpenConsole: Cannot open %s (%s)\n", consoleDev, strerror(errno)); -#ifdef HAS_USL_VTS - - /* Change ownership of the vt */ + /* Change ownership of the vt or console */ chown(consoleDev, getuid(), getgid()); +#ifdef HAS_USL_VTS if (vtEnabled) { /* @@ -179,6 +213,13 @@ xf86OpenConsole(void) if (ioctl(xf86Info.consoleFd, VT_WAITACTIVE, xf86Info.vtno) != 0) xf86Msg(X_WARNING, "xf86OpenConsole: VT_WAITACTIVE failed\n"); +#ifdef VT_SET_CONSUSER /* added in snv_139 */ + if (strcmp(display, "0") == 0) + if (ioctl(xf86Info.consoleFd, VT_SET_CONSUSER) != 0) + xf86Msg(X_WARNING, + "xf86OpenConsole: VT_SET_CONSUSER failed\n"); +#endif + if (ioctl(xf86Info.consoleFd, VT_GETMODE, &VT) < 0) FatalError("xf86OpenConsole: VT_GETMODE failed\n"); @@ -220,6 +261,13 @@ xf86OpenConsole(void) if (ioctl(xf86Info.consoleFd, VT_WAITACTIVE, xf86Info.vtno) != 0) xf86Msg(X_WARNING, "xf86OpenConsole: VT_WAITACTIVE failed\n"); +#ifdef VT_SET_CONSUSER /* added in snv_139 */ + if (strcmp(display, "0") == 0) + if (ioctl(xf86Info.consoleFd, VT_SET_CONSUSER) != 0) + xf86Msg(X_WARNING, + "xf86OpenConsole: VT_SET_CONSUSER failed\n"); +#endif + /* * If the server doesn't have the VT when the reset occurs, * this is to make sure we don't continue until the activate @@ -330,6 +378,15 @@ xf86ProcessArgument(int argc, char **argv, int i) return 1; } + /* + * Use /dev/console as the console device. + */ + if (!strcmp(argv[i], "-C")) + { + UseConsole = TRUE; + return 1; + } + #ifdef HAS_USL_VTS if ((argv[i][0] == 'v') && (argv[i][1] == 't')) @@ -364,4 +421,5 @@ void xf86UseMsg() ErrorF("-dev Framebuffer device\n"); ErrorF("-keeptty Don't detach controlling tty\n"); ErrorF(" (for debugging only)\n"); + ErrorF("-C Use /dev/console as the console device\n"); } diff --git a/xorg-server/include/dix.h b/xorg-server/include/dix.h index 7fe4407e3..254ddb3f4 100644 --- a/xorg-server/include/dix.h +++ b/xorg-server/include/dix.h @@ -300,7 +300,7 @@ extern _X_EXPORT Bool ValidAtom( extern _X_EXPORT const char *NameForAtom( Atom /*atom*/); -extern _X_EXPORT void AtomError(void); +extern _X_EXPORT void AtomError(void) _X_NORETURN; extern _X_EXPORT void FreeAllAtoms(void); diff --git a/xorg-server/include/dixstruct.h b/xorg-server/include/dixstruct.h index 5b1a6981d..8f365f6ed 100644 --- a/xorg-server/include/dixstruct.h +++ b/xorg-server/include/dixstruct.h @@ -1,189 +1,189 @@ -/*********************************************************** -Copyright 1987 by Digital Equipment Corporation, Maynard, Massachusetts. - - All Rights Reserved - -Permission to use, copy, modify, and distribute this software and its -documentation for any purpose and without fee is hereby granted, -provided that the above copyright notice appear in all copies and that -both that copyright notice and this permission notice appear in -supporting documentation, and that the name of Digital not be -used in advertising or publicity pertaining to distribution of the -software without specific, written prior permission. - -DIGITAL DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE, INCLUDING -ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO EVENT SHALL -DIGITAL BE LIABLE FOR ANY SPECIAL, INDIRECT OR CONSEQUENTIAL DAMAGES OR -ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, -WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, -ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS -SOFTWARE. - -******************************************************************/ - -#ifndef DIXSTRUCT_H -#define DIXSTRUCT_H - -#include "dix.h" -#include "resource.h" -#include "cursor.h" -#include "gc.h" -#include "pixmap.h" -#include "privates.h" -#include - -/* - * direct-mapped hash table, used by resource manager to store - * translation from client ids to server addresses. - */ - -extern _X_EXPORT CallbackListPtr ClientStateCallback; - -typedef struct { - ClientPtr client; - xConnSetupPrefix *prefix; - xConnSetup *setup; -} NewClientInfoRec; - -typedef void (*ReplySwapPtr) ( - ClientPtr /* pClient */, - int /* size */, - void * /* pbuf */); - -extern _X_EXPORT void ReplyNotSwappd ( - ClientPtr /* pClient */, - int /* size */, - void * /* pbuf */); - -typedef enum {ClientStateInitial, - ClientStateAuthenticating, - ClientStateRunning, - ClientStateRetained, - ClientStateGone, - ClientStateCheckingSecurity, - ClientStateCheckedSecurity} ClientState; - -#ifdef XFIXES -typedef struct _saveSet { - struct _Window *windowPtr; - Bool toRoot; - Bool map; -} SaveSetElt; -#define SaveSetWindow(ss) ((ss).windowPtr) -#define SaveSetToRoot(ss) ((ss).toRoot) -#define SaveSetShouldMap(ss) ((ss).map) -#define SaveSetAssignWindow(ss,w) ((ss).windowPtr = (w)) -#define SaveSetAssignToRoot(ss,tr) ((ss).toRoot = (tr)) -#define SaveSetAssignMap(ss,m) ((ss).map = (m)) -#else -typedef struct _Window *SaveSetElt; -#define SaveSetWindow(ss) (ss) -#define SaveSetToRoot(ss) FALSE -#define SaveSetShouldMap(ss) TRUE -#define SaveSetAssignWindow(ss,w) ((ss) = (w)) -#define SaveSetAssignToRoot(ss,tr) -#define SaveSetAssignMap(ss,m) -#endif - -typedef struct _Client { - int index; - Mask clientAsMask; - pointer requestBuffer; - pointer osPrivate; /* for OS layer, including scheduler */ - Bool swapped; - ReplySwapPtr pSwapReplyFunc; - XID errorValue; - int sequence; - int closeDownMode; - int clientGone; - int noClientException; /* this client died or needs to be - * killed */ - SaveSetElt *saveSet; - int numSaved; - int (**requestVector) ( - ClientPtr /* pClient */); - CARD32 req_len; /* length of current request */ - Bool big_requests; /* supports large requests */ - int priority; - ClientState clientState; - PrivateRec *devPrivates; - unsigned short xkbClientFlags; - unsigned short mapNotifyMask; - unsigned short newKeyboardNotifyMask; - unsigned short vMajor,vMinor; - KeyCode minKC,maxKC; - - unsigned long replyBytesRemaining; - int smart_priority; - long smart_start_tick; - long smart_stop_tick; - long smart_check_tick; - - DeviceIntPtr clientPtr; -} ClientRec; - -/* - * Scheduling interface - */ -extern _X_EXPORT long SmartScheduleTime; -extern _X_EXPORT long SmartScheduleInterval; -extern _X_EXPORT long SmartScheduleSlice; -extern _X_EXPORT long SmartScheduleMaxSlice; -extern _X_EXPORT Bool SmartScheduleDisable; -extern _X_EXPORT void SmartScheduleStartTimer(void); -extern _X_EXPORT void SmartScheduleStopTimer(void); -#define SMART_MAX_PRIORITY (20) -#define SMART_MIN_PRIORITY (-20) - -extern _X_EXPORT Bool SmartScheduleInit(void); - - -/* This prototype is used pervasively in Xext, dix */ -#define DISPATCH_PROC(func) int func(ClientPtr /* client */) - -typedef struct _WorkQueue { - struct _WorkQueue *next; - Bool (*function) ( - ClientPtr /* pClient */, - pointer /* closure */ -); - ClientPtr client; - pointer closure; -} WorkQueueRec; - -extern _X_EXPORT TimeStamp currentTime; -extern _X_EXPORT TimeStamp lastDeviceEventTime; - -extern _X_EXPORT int CompareTimeStamps( - TimeStamp /*a*/, - TimeStamp /*b*/); - -extern _X_EXPORT TimeStamp ClientTimeToServerTime(CARD32 /*c*/); - -typedef struct _CallbackRec { - CallbackProcPtr proc; - pointer data; - Bool deleted; - struct _CallbackRec *next; -} CallbackRec, *CallbackPtr; - -typedef struct _CallbackList { - int inCallback; - Bool deleted; - int numDeleted; - CallbackPtr list; -} CallbackListRec; - -/* proc vectors */ - -extern _X_EXPORT int (* InitialVector[3]) (ClientPtr /*client*/); - -extern _X_EXPORT int (* ProcVector[256]) (ClientPtr /*client*/); - -extern _X_EXPORT int (* SwappedProcVector[256]) (ClientPtr /*client*/); - -extern _X_EXPORT ReplySwapPtr ReplySwapVector[256]; - -extern _X_EXPORT int ProcBadRequest(ClientPtr /*client*/); - -#endif /* DIXSTRUCT_H */ +/*********************************************************** +Copyright 1987 by Digital Equipment Corporation, Maynard, Massachusetts. + + All Rights Reserved + +Permission to use, copy, modify, and distribute this software and its +documentation for any purpose and without fee is hereby granted, +provided that the above copyright notice appear in all copies and that +both that copyright notice and this permission notice appear in +supporting documentation, and that the name of Digital not be +used in advertising or publicity pertaining to distribution of the +software without specific, written prior permission. + +DIGITAL DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE, INCLUDING +ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO EVENT SHALL +DIGITAL BE LIABLE FOR ANY SPECIAL, INDIRECT OR CONSEQUENTIAL DAMAGES OR +ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, +WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, +ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS +SOFTWARE. + +******************************************************************/ + +#ifndef DIXSTRUCT_H +#define DIXSTRUCT_H + +#include "dix.h" +#include "resource.h" +#include "cursor.h" +#include "gc.h" +#include "pixmap.h" +#include "privates.h" +#include + +/* + * direct-mapped hash table, used by resource manager to store + * translation from client ids to server addresses. + */ + +extern _X_EXPORT CallbackListPtr ClientStateCallback; + +typedef struct { + ClientPtr client; + xConnSetupPrefix *prefix; + xConnSetup *setup; +} NewClientInfoRec; + +typedef void (*ReplySwapPtr) ( + ClientPtr /* pClient */, + int /* size */, + void * /* pbuf */); + +extern _X_EXPORT void ReplyNotSwappd ( + ClientPtr /* pClient */, + int /* size */, + void * /* pbuf */) _X_NORETURN; + +typedef enum {ClientStateInitial, + ClientStateAuthenticating, + ClientStateRunning, + ClientStateRetained, + ClientStateGone, + ClientStateCheckingSecurity, + ClientStateCheckedSecurity} ClientState; + +#ifdef XFIXES +typedef struct _saveSet { + struct _Window *windowPtr; + Bool toRoot; + Bool map; +} SaveSetElt; +#define SaveSetWindow(ss) ((ss).windowPtr) +#define SaveSetToRoot(ss) ((ss).toRoot) +#define SaveSetShouldMap(ss) ((ss).map) +#define SaveSetAssignWindow(ss,w) ((ss).windowPtr = (w)) +#define SaveSetAssignToRoot(ss,tr) ((ss).toRoot = (tr)) +#define SaveSetAssignMap(ss,m) ((ss).map = (m)) +#else +typedef struct _Window *SaveSetElt; +#define SaveSetWindow(ss) (ss) +#define SaveSetToRoot(ss) FALSE +#define SaveSetShouldMap(ss) TRUE +#define SaveSetAssignWindow(ss,w) ((ss) = (w)) +#define SaveSetAssignToRoot(ss,tr) +#define SaveSetAssignMap(ss,m) +#endif + +typedef struct _Client { + int index; + Mask clientAsMask; + pointer requestBuffer; + pointer osPrivate; /* for OS layer, including scheduler */ + Bool swapped; + ReplySwapPtr pSwapReplyFunc; + XID errorValue; + int sequence; + int closeDownMode; + int clientGone; + int noClientException; /* this client died or needs to be + * killed */ + SaveSetElt *saveSet; + int numSaved; + int (**requestVector) ( + ClientPtr /* pClient */); + CARD32 req_len; /* length of current request */ + Bool big_requests; /* supports large requests */ + int priority; + ClientState clientState; + PrivateRec *devPrivates; + unsigned short xkbClientFlags; + unsigned short mapNotifyMask; + unsigned short newKeyboardNotifyMask; + unsigned short vMajor,vMinor; + KeyCode minKC,maxKC; + + unsigned long replyBytesRemaining; + int smart_priority; + long smart_start_tick; + long smart_stop_tick; + long smart_check_tick; + + DeviceIntPtr clientPtr; +} ClientRec; + +/* + * Scheduling interface + */ +extern _X_EXPORT long SmartScheduleTime; +extern _X_EXPORT long SmartScheduleInterval; +extern _X_EXPORT long SmartScheduleSlice; +extern _X_EXPORT long SmartScheduleMaxSlice; +extern _X_EXPORT Bool SmartScheduleDisable; +extern _X_EXPORT void SmartScheduleStartTimer(void); +extern _X_EXPORT void SmartScheduleStopTimer(void); +#define SMART_MAX_PRIORITY (20) +#define SMART_MIN_PRIORITY (-20) + +extern _X_EXPORT Bool SmartScheduleInit(void); + + +/* This prototype is used pervasively in Xext, dix */ +#define DISPATCH_PROC(func) int func(ClientPtr /* client */) + +typedef struct _WorkQueue { + struct _WorkQueue *next; + Bool (*function) ( + ClientPtr /* pClient */, + pointer /* closure */ +); + ClientPtr client; + pointer closure; +} WorkQueueRec; + +extern _X_EXPORT TimeStamp currentTime; +extern _X_EXPORT TimeStamp lastDeviceEventTime; + +extern _X_EXPORT int CompareTimeStamps( + TimeStamp /*a*/, + TimeStamp /*b*/); + +extern _X_EXPORT TimeStamp ClientTimeToServerTime(CARD32 /*c*/); + +typedef struct _CallbackRec { + CallbackProcPtr proc; + pointer data; + Bool deleted; + struct _CallbackRec *next; +} CallbackRec, *CallbackPtr; + +typedef struct _CallbackList { + int inCallback; + Bool deleted; + int numDeleted; + CallbackPtr list; +} CallbackListRec; + +/* proc vectors */ + +extern _X_EXPORT int (* InitialVector[3]) (ClientPtr /*client*/); + +extern _X_EXPORT int (* ProcVector[256]) (ClientPtr /*client*/); + +extern _X_EXPORT int (* SwappedProcVector[256]) (ClientPtr /*client*/); + +extern _X_EXPORT ReplySwapPtr ReplySwapVector[256]; + +extern _X_EXPORT int ProcBadRequest(ClientPtr /*client*/); + +#endif /* DIXSTRUCT_H */ diff --git a/xorg-server/include/extnsionst.h b/xorg-server/include/extnsionst.h index 19c76fcc4..92790b38f 100644 --- a/xorg-server/include/extnsionst.h +++ b/xorg-server/include/extnsionst.h @@ -1,112 +1,112 @@ -/*********************************************************** - -Copyright 1987, 1998 The Open Group - -Permission to use, copy, modify, distribute, and sell this software and its -documentation for any purpose is hereby granted without fee, provided that -the above copyright notice appear in all copies and that both that -copyright notice and this permission notice appear in supporting -documentation. - -The above copyright notice and this permission notice shall be included in -all copies or substantial portions of the Software. - -THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR -IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, -FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE -OPEN GROUP BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN -AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN -CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. - -Except as contained in this notice, the name of The Open Group shall not be -used in advertising or otherwise to promote the sale, use or other dealings -in this Software without prior written authorization from The Open Group. - - -Copyright 1987 by Digital Equipment Corporation, Maynard, Massachusetts. - - All Rights Reserved - -Permission to use, copy, modify, and distribute this software and its -documentation for any purpose and without fee is hereby granted, -provided that the above copyright notice appear in all copies and that -both that copyright notice and this permission notice appear in -supporting documentation, and that the name of Digital not be -used in advertising or publicity pertaining to distribution of the -software without specific, written prior permission. - -DIGITAL DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE, INCLUDING -ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO EVENT SHALL -DIGITAL BE LIABLE FOR ANY SPECIAL, INDIRECT OR CONSEQUENTIAL DAMAGES OR -ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, -WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, -ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS -SOFTWARE. - -******************************************************************/ - -#ifndef EXTENSIONSTRUCT_H -#define EXTENSIONSTRUCT_H - -#include "dix.h" -#include "misc.h" -#include "screenint.h" -#include "extension.h" -#include "gc.h" -#include "privates.h" - -typedef struct _ExtensionEntry { - int index; - void (* CloseDown)( /* called at server shutdown */ - struct _ExtensionEntry * /* extension */); - char *name; /* extension name */ - int base; /* base request number */ - int eventBase; - int eventLast; - int errorBase; - int errorLast; - int num_aliases; - char **aliases; - pointer extPrivate; - unsigned short (* MinorOpcode)( /* called for errors */ - ClientPtr /* client */); - PrivateRec *devPrivates; -} ExtensionEntry; - -/* - * The arguments may be different for extension event swapping functions. - * Deal with this by casting when initializing the event's EventSwapVector[] - * entries. - */ -typedef void (*EventSwapPtr) (xEvent *, xEvent *); - -extern _X_EXPORT EventSwapPtr EventSwapVector[128]; - -extern _X_EXPORT void NotImplemented ( /* FIXME: this may move to another file... */ - xEvent *, - xEvent *); - -#define SetGCVector(pGC, VectorElement, NewRoutineAddress, Atom) \ - pGC->VectorElement = NewRoutineAddress; - -#define GetGCValue(pGC, GCElement) (pGC->GCElement) - -extern _X_EXPORT ExtensionEntry *AddExtension( - char* /*name*/, - int /*NumEvents*/, - int /*NumErrors*/, - int (* /*MainProc*/)(ClientPtr /*client*/), - int (* /*SwappedMainProc*/)(ClientPtr /*client*/), - void (* /*CloseDownProc*/)(ExtensionEntry * /*extension*/), - unsigned short (* /*MinorOpcodeProc*/)(ClientPtr /*client*/) -); - -extern _X_EXPORT Bool AddExtensionAlias( - char* /*alias*/, - ExtensionEntry * /*extension*/); - -extern _X_EXPORT ExtensionEntry *CheckExtension(const char *extname); -extern _X_EXPORT ExtensionEntry *GetExtensionEntry(int major); - -#endif /* EXTENSIONSTRUCT_H */ - +/*********************************************************** + +Copyright 1987, 1998 The Open Group + +Permission to use, copy, modify, distribute, and sell this software and its +documentation for any purpose is hereby granted without fee, provided that +the above copyright notice appear in all copies and that both that +copyright notice and this permission notice appear in supporting +documentation. + +The above copyright notice and this permission notice shall be included in +all copies or substantial portions of the Software. + +THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR +IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, +FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE +OPEN GROUP BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN +AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN +CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. + +Except as contained in this notice, the name of The Open Group shall not be +used in advertising or otherwise to promote the sale, use or other dealings +in this Software without prior written authorization from The Open Group. + + +Copyright 1987 by Digital Equipment Corporation, Maynard, Massachusetts. + + All Rights Reserved + +Permission to use, copy, modify, and distribute this software and its +documentation for any purpose and without fee is hereby granted, +provided that the above copyright notice appear in all copies and that +both that copyright notice and this permission notice appear in +supporting documentation, and that the name of Digital not be +used in advertising or publicity pertaining to distribution of the +software without specific, written prior permission. + +DIGITAL DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE, INCLUDING +ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO EVENT SHALL +DIGITAL BE LIABLE FOR ANY SPECIAL, INDIRECT OR CONSEQUENTIAL DAMAGES OR +ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, +WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, +ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS +SOFTWARE. + +******************************************************************/ + +#ifndef EXTENSIONSTRUCT_H +#define EXTENSIONSTRUCT_H + +#include "dix.h" +#include "misc.h" +#include "screenint.h" +#include "extension.h" +#include "gc.h" +#include "privates.h" + +typedef struct _ExtensionEntry { + int index; + void (* CloseDown)( /* called at server shutdown */ + struct _ExtensionEntry * /* extension */); + char *name; /* extension name */ + int base; /* base request number */ + int eventBase; + int eventLast; + int errorBase; + int errorLast; + int num_aliases; + char **aliases; + pointer extPrivate; + unsigned short (* MinorOpcode)( /* called for errors */ + ClientPtr /* client */); + PrivateRec *devPrivates; +} ExtensionEntry; + +/* + * The arguments may be different for extension event swapping functions. + * Deal with this by casting when initializing the event's EventSwapVector[] + * entries. + */ +typedef void (*EventSwapPtr) (xEvent *, xEvent *); + +extern _X_EXPORT EventSwapPtr EventSwapVector[128]; + +extern _X_EXPORT void NotImplemented ( /* FIXME: this may move to another file... */ + xEvent *, + xEvent *) _X_NORETURN; + +#define SetGCVector(pGC, VectorElement, NewRoutineAddress, Atom) \ + pGC->VectorElement = NewRoutineAddress; + +#define GetGCValue(pGC, GCElement) (pGC->GCElement) + +extern _X_EXPORT ExtensionEntry *AddExtension( + char* /*name*/, + int /*NumEvents*/, + int /*NumErrors*/, + int (* /*MainProc*/)(ClientPtr /*client*/), + int (* /*SwappedMainProc*/)(ClientPtr /*client*/), + void (* /*CloseDownProc*/)(ExtensionEntry * /*extension*/), + unsigned short (* /*MinorOpcodeProc*/)(ClientPtr /*client*/) +); + +extern _X_EXPORT Bool AddExtensionAlias( + char* /*alias*/, + ExtensionEntry * /*extension*/); + +extern _X_EXPORT ExtensionEntry *CheckExtension(const char *extname); +extern _X_EXPORT ExtensionEntry *GetExtensionEntry(int major); + +#endif /* EXTENSIONSTRUCT_H */ + -- cgit v1.2.3